diff options
Diffstat (limited to 'drivers/tty/serial/fsl_lpuart.c')
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 76 |
1 files changed, 71 insertions, 5 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 898dcb091a27..849c1f9991ce 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -117,7 +117,7 @@ #define UARTSFIFO_TXOF 0x02 #define UARTSFIFO_RXUF 0x01 -/* 32-bit register defination */ +/* 32-bit register definition */ #define UARTBAUD 0x00 #define UARTSTAT 0x04 #define UARTCTRL 0x08 @@ -521,6 +521,57 @@ static int lpuart_poll_get_char(struct uart_port *port) return readb(port->membase + UARTDR); } +static int lpuart32_poll_init(struct uart_port *port) +{ + unsigned long flags; + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + u32 temp; + + sport->port.fifosize = 0; + + spin_lock_irqsave(&sport->port.lock, flags); + + /* Disable Rx & Tx */ + writel(0, sport->port.membase + UARTCTRL); + + temp = readl(sport->port.membase + UARTFIFO); + + /* Enable Rx and Tx FIFO */ + writel(temp | UARTFIFO_RXFE | UARTFIFO_TXFE, + sport->port.membase + UARTFIFO); + + /* flush Tx and Rx FIFO */ + writel(UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH, + sport->port.membase + UARTFIFO); + + /* explicitly clear RDRF */ + if (readl(sport->port.membase + UARTSTAT) & UARTSTAT_RDRF) { + readl(sport->port.membase + UARTDATA); + writel(UARTFIFO_RXUF, sport->port.membase + UARTFIFO); + } + + /* Enable Rx and Tx */ + writel(UARTCTRL_RE | UARTCTRL_TE, sport->port.membase + UARTCTRL); + spin_unlock_irqrestore(&sport->port.lock, flags); + + return 0; +} + +static void lpuart32_poll_put_char(struct uart_port *port, unsigned char c) +{ + while (!(readl(port->membase + UARTSTAT) & UARTSTAT_TDRE)) + barrier(); + + writel(c, port->membase + UARTDATA); +} + +static int lpuart32_poll_get_char(struct uart_port *port) +{ + if (!(readl(port->membase + UARTSTAT) & UARTSTAT_RDRF)) + return NO_POLL_CHAR; + + return readl(port->membase + UARTDATA); +} #endif static inline void lpuart_transmit_buffer(struct lpuart_port *sport) @@ -1025,6 +1076,11 @@ static int lpuart_config_rs485(struct uart_port *port, ~(UARTMODEM_TXRTSPOL | UARTMODEM_TXRTSE); writeb(modem, sport->port.membase + UARTMODEM); + /* clear unsupported configurations */ + rs485->delay_rts_before_send = 0; + rs485->delay_rts_after_send = 0; + rs485->flags &= ~SER_RS485_RX_DURING_TX; + if (rs485->flags & SER_RS485_ENABLED) { /* Enable auto RS-485 RTS mode */ modem |= UARTMODEM_TXRTSE; @@ -1782,6 +1838,11 @@ static const struct uart_ops lpuart32_pops = { .config_port = lpuart_config_port, .verify_port = lpuart_verify_port, .flush_buffer = lpuart_flush_buffer, +#if defined(CONFIG_CONSOLE_POLL) + .poll_init = lpuart32_poll_init, + .poll_get_char = lpuart32_poll_get_char, + .poll_put_char = lpuart32_poll_put_char, +#endif }; static struct lpuart_port *lpuart_ports[UART_NR]; @@ -2203,6 +2264,7 @@ static int lpuart_suspend(struct device *dev) { struct lpuart_port *sport = dev_get_drvdata(dev); unsigned long temp; + bool irq_wake; if (lpuart_is_32(sport)) { /* disable Rx/Tx and interrupts */ @@ -2218,6 +2280,9 @@ static int lpuart_suspend(struct device *dev) uart_suspend_port(&lpuart_reg, &sport->port); + /* uart_suspend_port() might set wakeup flag */ + irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq)); + if (sport->lpuart_dma_rx_use) { /* * EDMA driver during suspend will forcefully release any @@ -2226,7 +2291,7 @@ static int lpuart_suspend(struct device *dev) * cannot resume as as expected, hence gracefully release the * Rx DMA path before suspend and start Rx DMA path on resume. */ - if (sport->port.irq_wake) { + if (irq_wake) { del_timer_sync(&sport->lpuart_timer); lpuart_dma_rx_free(&sport->port); } @@ -2241,7 +2306,7 @@ static int lpuart_suspend(struct device *dev) dmaengine_terminate_all(sport->dma_tx_chan); } - if (sport->port.suspended && !sport->port.irq_wake) + if (sport->port.suspended && !irq_wake) clk_disable_unprepare(sport->clk); return 0; @@ -2250,9 +2315,10 @@ static int lpuart_suspend(struct device *dev) static int lpuart_resume(struct device *dev) { struct lpuart_port *sport = dev_get_drvdata(dev); + bool irq_wake = irqd_is_wakeup_set(irq_get_irq_data(sport->port.irq)); unsigned long temp; - if (sport->port.suspended && !sport->port.irq_wake) + if (sport->port.suspended && !irq_wake) clk_prepare_enable(sport->clk); if (lpuart_is_32(sport)) { @@ -2269,7 +2335,7 @@ static int lpuart_resume(struct device *dev) } if (sport->lpuart_dma_rx_use) { - if (sport->port.irq_wake) { + if (irq_wake) { if (!lpuart_start_rx_dma(sport)) rx_dma_timer_init(sport); else |