diff options
Diffstat (limited to 'drivers/tty/serial/fsl_lpuart.c')
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 53 |
1 files changed, 28 insertions, 25 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 4e128d19e0ad..c31b8f3db6bf 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -5,10 +5,6 @@ * Copyright 2012-2014 Freescale Semiconductor, Inc. */ -#if defined(CONFIG_SERIAL_FSL_LPUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - #include <linux/clk.h> #include <linux/console.h> #include <linux/dma-mapping.h> @@ -268,6 +264,7 @@ struct lpuart_port { int rx_dma_rng_buf_len; unsigned int dma_tx_nents; wait_queue_head_t dma_wait; + bool id_allocated; }; struct lpuart_soc_data { @@ -864,9 +861,7 @@ static void lpuart_rxint(struct lpuart_port *sport) if (sr & UARTSR1_OR) flg = TTY_OVERRUN; -#ifdef SUPPORT_SYSRQ sport->port.sysrq = 0; -#endif } tty_insert_flip_char(port, rx, flg); @@ -946,9 +941,7 @@ static void lpuart32_rxint(struct lpuart_port *sport) if (sr & UARTSTAT_OR) flg = TTY_OVERRUN; -#ifdef SUPPORT_SYSRQ sport->port.sysrq = 0; -#endif } tty_insert_flip_char(port, rx, flg); @@ -2376,7 +2369,9 @@ static int __init lpuart32_early_console_setup(struct earlycon_device *device, if (!device->port.membase) return -ENODEV; - device->port.iotype = UPIO_MEM32BE; + if (device->port.iotype != UPIO_MEM32) + device->port.iotype = UPIO_MEM32BE; + device->con->write = lpuart32_early_write; return 0; } @@ -2396,7 +2391,6 @@ static int __init lpuart32_imx_early_console_setup(struct earlycon_device *devic OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup); OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup); OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup); -OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8qxp-lpuart", lpuart32_imx_early_console_setup); EARLYCON_DECLARE(lpuart, lpuart_early_console_setup); EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup); @@ -2429,19 +2423,6 @@ static int lpuart_probe(struct platform_device *pdev) if (!sport) return -ENOMEM; - ret = of_alias_get_id(np, "serial"); - if (ret < 0) { - ret = ida_simple_get(&fsl_lpuart_ida, 0, UART_NR, GFP_KERNEL); - if (ret < 0) { - dev_err(&pdev->dev, "port line is full, add device failed\n"); - return ret; - } - } - if (ret >= ARRAY_SIZE(lpuart_ports)) { - dev_err(&pdev->dev, "serial%d out of range\n", ret); - return -EINVAL; - } - sport->port.line = ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); sport->port.membase = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(sport->port.membase)) @@ -2461,6 +2442,7 @@ static int lpuart_probe(struct platform_device *pdev) sport->port.ops = &lpuart32_pops; else sport->port.ops = &lpuart_pops; + sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_FSL_LPUART_CONSOLE); sport->port.flags = UPF_BOOT_AUTOCONF; if (lpuart_is_32(sport)) @@ -2485,9 +2467,25 @@ static int lpuart_probe(struct platform_device *pdev) } } + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + ret = ida_simple_get(&fsl_lpuart_ida, 0, UART_NR, GFP_KERNEL); + if (ret < 0) { + dev_err(&pdev->dev, "port line is full, add device failed\n"); + return ret; + } + sport->id_allocated = true; + } + if (ret >= ARRAY_SIZE(lpuart_ports)) { + dev_err(&pdev->dev, "serial%d out of range\n", ret); + ret = -EINVAL; + goto failed_out_of_range; + } + sport->port.line = ret; + ret = lpuart_enable_clks(sport); if (ret) - return ret; + goto failed_clock_enable; sport->port.uartclk = lpuart_get_baud_clk_rate(sport); lpuart_ports[sport->port.line] = sport; @@ -2537,6 +2535,10 @@ static int lpuart_probe(struct platform_device *pdev) failed_attach_port: failed_irq_request: lpuart_disable_clks(sport); +failed_clock_enable: +failed_out_of_range: + if (sport->id_allocated) + ida_simple_remove(&fsl_lpuart_ida, sport->port.line); return ret; } @@ -2546,7 +2548,8 @@ static int lpuart_remove(struct platform_device *pdev) uart_remove_one_port(&lpuart_reg, &sport->port); - ida_simple_remove(&fsl_lpuart_ida, sport->port.line); + if (sport->id_allocated) + ida_simple_remove(&fsl_lpuart_ida, sport->port.line); lpuart_disable_clks(sport); |