diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/tty/serial/m32r_sio.c | 134 |
1 files changed, 21 insertions, 113 deletions
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c index 0eeb64f2499c..68765f7c2645 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/m32r_sio.c @@ -47,59 +47,26 @@ #define BAUD_RATE 115200 #include <linux/serial_core.h> -#include "m32r_sio.h" #include "m32r_sio_reg.h" -/* - * Debugging. - */ -#if 0 -#define DEBUG_AUTOCONF(fmt...) printk(fmt) -#else -#define DEBUG_AUTOCONF(fmt...) do { } while (0) -#endif - -#if 0 -#define DEBUG_INTR(fmt...) printk(fmt) -#else -#define DEBUG_INTR(fmt...) do { } while (0) -#endif - #define PASS_LIMIT 256 -#define BASE_BAUD 115200 - /* Standard COM flags */ #define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) -/* - * SERIAL_PORT_DFNS tells us about built-in ports that have no - * standard enumeration mechanism. Platforms that can find all - * serial ports via mechanisms like ACPI or PCI need not supply it. - */ +static const struct { + unsigned int port; + unsigned int irq; +} old_serial_port[] = { #if defined(CONFIG_PLAT_USRV) - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ - -#else /* !CONFIG_PLAT_USRV */ - -#if defined(CONFIG_SERIAL_M32R_PLDSIO) -#define SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ - STD_COM_FLAGS }, /* ttyS0 */ + /* PORT IRQ FLAGS */ + { 0x3F8, PLD_IRQ_UART0 }, /* ttyS0 */ + { 0x2F8, PLD_IRQ_UART1 }, /* ttyS1 */ +#elif defined(CONFIG_SERIAL_M32R_PLDSIO) + { ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV }, /* ttyS0 */ #else -#define SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ - STD_COM_FLAGS }, /* ttyS0 */ + { M32R_SIO_OFFSET, M32R_IRQ_SIO0_R }, /* ttyS0 */ #endif - -#endif /* !CONFIG_PLAT_USRV */ - -static struct old_serial_port old_serial_port[] = { - SERIAL_PORT_DFNS }; #define UART_NR ARRAY_SIZE(old_serial_port) @@ -108,19 +75,7 @@ struct uart_sio_port { struct uart_port port; struct timer_list timer; /* "no irq" timer */ struct list_head list; /* ports on this IRQ */ - unsigned short rev; - unsigned char acr; unsigned char ier; - unsigned char lcr; - unsigned char mcr_mask; /* mask of user bits */ - unsigned char mcr_force; /* mask of forced bits */ - unsigned char lsr_break_flag; - - /* - * We provide a per-port pm hook. - */ - void (*pm)(struct uart_port *port, - unsigned int state, unsigned int old); }; struct irq_info { @@ -345,14 +300,8 @@ static void receive_chars(struct uart_sio_port *up, int *status) */ *status &= up->port.read_status_mask; - if (up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } - if (*status & UART_LSR_BI) { - DEBUG_INTR("handling break...."); + pr_debug("handling break....\n"); flag = TTY_BREAK; } else if (*status & UART_LSR_PE) flag = TTY_PARITY; @@ -413,7 +362,7 @@ static void transmit_chars(struct uart_sio_port *up) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&up->port); - DEBUG_INTR("THRE..."); + pr_debug("THRE...\n"); if (uart_circ_empty(xmit)) m32r_sio_stop_tx(&up->port); @@ -425,7 +374,7 @@ static void transmit_chars(struct uart_sio_port *up) static inline void m32r_sio_handle_port(struct uart_sio_port *up, unsigned int status) { - DEBUG_INTR("status = %x...", status); + pr_debug("status = %x...\n", status); if (status & 0x04) receive_chars(up, &status); @@ -453,7 +402,7 @@ static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) struct list_head *l, *end = NULL; int pass_counter = 0; - DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); + pr_debug("m32r_sio_interrupt(%d)...\n", irq); #ifdef CONFIG_SERIAL_M32R_PLDSIO // if (irq == PLD_IRQ_SIO0_SND) @@ -493,7 +442,7 @@ static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) spin_unlock(&i->lock); - DEBUG_INTR("end.\n"); + pr_debug("end.\n"); return IRQ_HANDLED; } @@ -782,20 +731,9 @@ static void m32r_sio_set_termios(struct uart_port *port, serial_out(up, UART_IER, up->ier); - up->lcr = cval; /* Save LCR */ spin_unlock_irqrestore(&up->port.lock, flags); } -static void m32r_sio_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct uart_sio_port *up = - container_of(port, struct uart_sio_port, port); - - if (up->pm) - up->pm(port, state, oldstate); -} - /* * Resource handling. This is complicated by the fact that resources * depend on the port type. Maybe we should be claiming the standard @@ -932,7 +870,6 @@ static struct uart_ops m32r_sio_pops = { .startup = m32r_sio_startup, .shutdown = m32r_sio_shutdown, .set_termios = m32r_sio_set_termios, - .pm = m32r_sio_pm, .release_port = m32r_sio_release_port, .request_port = m32r_sio_request_port, .config_port = m32r_sio_config_port, @@ -951,15 +888,14 @@ static void __init m32r_sio_init_ports(void) return; first = 0; - for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); - i++, up++) { + for (i = 0, up = m32r_sio_ports; i < UART_NR; i++, up++) { up->port.iobase = old_serial_port[i].port; up->port.irq = irq_canonicalize(old_serial_port[i].irq); - up->port.uartclk = old_serial_port[i].baud_base * 16; - up->port.flags = old_serial_port[i].flags; - up->port.membase = old_serial_port[i].iomem_base; - up->port.iotype = old_serial_port[i].io_type; - up->port.regshift = old_serial_port[i].iomem_reg_shift; + up->port.uartclk = BAUD_RATE * 16; + up->port.flags = STD_COM_FLAGS; + up->port.membase = 0; + up->port.iotype = 0; + up->port.regshift = 0; up->port.ops = &m32r_sio_pops; } } @@ -978,9 +914,6 @@ static void __init m32r_sio_register_ports(struct uart_driver *drv) init_timer(&up->timer); up->timer.function = m32r_sio_timeout; - up->mcr_mask = ~0; - up->mcr_force = 0; - uart_add_one_port(drv, &up->port); } } @@ -1112,28 +1045,6 @@ static struct uart_driver m32r_sio_reg = { .cons = M32R_SIO_CONSOLE, }; -/** - * m32r_sio_suspend_port - suspend one serial port - * @line: serial line number - * - * Suspend one serial port. - */ -void m32r_sio_suspend_port(int line) -{ - uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); -} - -/** - * m32r_sio_resume_port - resume one serial port - * @line: serial line number - * - * Resume one serial port. - */ -void m32r_sio_resume_port(int line) -{ - uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); -} - static int __init m32r_sio_init(void) { int ret, i; @@ -1163,8 +1074,5 @@ static void __exit m32r_sio_exit(void) module_init(m32r_sio_init); module_exit(m32r_sio_exit); -EXPORT_SYMBOL(m32r_sio_suspend_port); -EXPORT_SYMBOL(m32r_sio_resume_port); - MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Generic M32R SIO serial driver"); |