diff options
Diffstat (limited to 'drivers/tty/serial/max310x.c')
| -rw-r--r-- | drivers/tty/serial/max310x.c | 417 |
1 files changed, 236 insertions, 181 deletions
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 8d71e4047bb3..2a99d0c61b9e 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1,7 +1,7 @@ /* * Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver * - * Copyright (C) 2012-2013 Alexander Shiyan <shc_work@mail.ru> + * Copyright (C) 2012-2014 Alexander Shiyan <shc_work@mail.ru> * * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org> * Based on max3110.c, by Feng Tang <feng.tang@intel.com> @@ -13,19 +13,21 @@ * (at your option) any later version. */ -#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> -#include <linux/bitops.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regmap.h> #include <linux/serial_core.h> #include <linux/serial.h> #include <linux/tty.h> #include <linux/tty_flip.h> -#include <linux/regmap.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> - -#include <linux/platform_data/max310x.h> +#include <linux/uaccess.h> #define MAX310X_NAME "max310x" #define MAX310X_MAJOR 204 @@ -161,10 +163,6 @@ /* IRDA register bits */ #define MAX310X_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ #define MAX310X_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ -#define MAX310X_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */ -#define MAX310X_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */ -#define MAX310X_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */ -#define MAX310X_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */ /* Flow control trigger level register masks */ #define MAX310X_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ @@ -220,26 +218,6 @@ * XOFF2 */ -/* GPIO configuration register bits */ -#define MAX310X_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */ -#define MAX310X_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */ -#define MAX310X_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */ -#define MAX310X_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */ -#define MAX310X_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */ -#define MAX310X_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */ -#define MAX310X_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */ -#define MAX310X_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */ - -/* GPIO DATA register bits */ -#define MAX310X_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */ -#define MAX310X_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */ -#define MAX310X_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */ -#define MAX310X_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */ -#define MAX310X_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */ -#define MAX310X_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */ -#define MAX310X_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */ -#define MAX310X_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */ - /* PLL configuration register masks */ #define MAX310X_PLLCFG_PREDIV_MASK (0x3f) /* PLL predivision value */ #define MAX310X_PLLCFG_PLLFACTOR_MASK (0xc0) /* PLL multiplication factor */ @@ -283,16 +261,15 @@ struct max310x_devtype { struct max310x_one { struct uart_port port; struct work_struct tx_work; + struct work_struct md_work; }; struct max310x_port { struct uart_driver uart; struct max310x_devtype *devtype; struct regmap *regmap; - struct regmap_config regcfg; struct mutex mutex; - struct max310x_pdata *pdata; - int gpio_used; + struct clk *clk; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; #endif @@ -504,25 +481,33 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg) return false; } -static void max310x_set_baud(struct uart_port *port, int baud) +static int max310x_set_baud(struct uart_port *port, int baud) { - unsigned int mode = 0, div = port->uartclk / baud; + unsigned int mode = 0, clk = port->uartclk, div = clk / baud; - if (!(div / 16)) { + /* Check for minimal value for divider */ + if (div < 16) + div = 16; + + if (clk % baud && (div / 16) < 0x8000) { /* Mode x2 */ mode = MAX310X_BRGCFG_2XMODE_BIT; - div = (port->uartclk * 2) / baud; - } - - if (!(div / 16)) { - /* Mode x4 */ - mode = MAX310X_BRGCFG_4XMODE_BIT; - div = (port->uartclk * 4) / baud; + clk = port->uartclk * 2; + div = clk / baud; + + if (clk % baud && (div / 16) < 0x8000) { + /* Mode x4 */ + mode = MAX310X_BRGCFG_4XMODE_BIT; + clk = port->uartclk * 4; + div = clk / baud; + } } max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8); max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16); max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode); + + return DIV_ROUND_CLOSEST(clk, div); } static int max310x_update_best_err(unsigned long f, long *besterr) @@ -538,18 +523,19 @@ static int max310x_update_best_err(unsigned long f, long *besterr) return 1; } -static int max310x_set_ref_clk(struct max310x_port *s) +static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq, + bool xtal) { unsigned int div, clksrc, pllcfg = 0; long besterr = -1; - unsigned long fdiv, fmul, bestfreq = s->pdata->frequency; + unsigned long fdiv, fmul, bestfreq = freq; /* First, update error without PLL */ - max310x_update_best_err(s->pdata->frequency, &besterr); + max310x_update_best_err(freq, &besterr); /* Try all possible PLL dividers */ for (div = 1; (div <= 63) && besterr; div++) { - fdiv = DIV_ROUND_CLOSEST(s->pdata->frequency, div); + fdiv = DIV_ROUND_CLOSEST(freq, div); /* Try multiplier 6 */ fmul = fdiv * 6; @@ -582,10 +568,7 @@ static int max310x_set_ref_clk(struct max310x_port *s) } /* Configure clock source */ - if (s->pdata->driver_flags & MAX310X_EXT_CLK) - clksrc = MAX310X_CLKSRC_EXTCLK_BIT; - else - clksrc = MAX310X_CLKSRC_CRYST_BIT; + clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT; /* Configure PLL */ if (pllcfg) { @@ -597,7 +580,7 @@ static int max310x_set_ref_clk(struct max310x_port *s) regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc); /* Wait for crystal */ - if (pllcfg && !(s->pdata->driver_flags & MAX310X_EXT_CLK)) + if (pllcfg && xtal) msleep(10); return (int)bestfreq; @@ -782,11 +765,21 @@ static unsigned int max310x_get_mctrl(struct uart_port *port) return TIOCM_DSR | TIOCM_CAR; } +static void max310x_md_proc(struct work_struct *ws) +{ + struct max310x_one *one = container_of(ws, struct max310x_one, md_work); + + max310x_port_update(&one->port, MAX310X_MODE2_REG, + MAX310X_MODE2_LOOPBACK_BIT, + (one->port.mctrl & TIOCM_LOOP) ? + MAX310X_MODE2_LOOPBACK_BIT : 0); +} + static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* DCD and DSR are not wired and CTS/RTS is hadnled automatically - * so do nothing - */ + struct max310x_one *one = container_of(port, struct max310x_one, port); + + schedule_work(&one->md_work); } static void max310x_break_ctl(struct uart_port *port, int break_state) @@ -875,40 +868,76 @@ static void max310x_set_termios(struct uart_port *port, port->uartclk / 4); /* Setup baudrate generator */ - max310x_set_baud(port, baud); + baud = max310x_set_baud(port, baud); /* Update timeout according to new baud rate */ uart_update_timeout(port, termios->c_cflag, baud); } +static int max310x_ioctl(struct uart_port *port, unsigned int cmd, + unsigned long arg) +{ +#if defined(TIOCSRS485) && defined(TIOCGRS485) + struct serial_rs485 rs485; + unsigned int val; + + switch (cmd) { + case TIOCSRS485: + if (copy_from_user(&rs485, (void __user *)arg, sizeof(rs485))) + return -EFAULT; + if (rs485.delay_rts_before_send > 0x0f || + rs485.delay_rts_after_send > 0x0f) + return -ERANGE; + val = (rs485.delay_rts_before_send << 4) | + rs485.delay_rts_after_send; + max310x_port_write(port, MAX310X_HDPIXDELAY_REG, val); + if (rs485.flags & SER_RS485_ENABLED) { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, + MAX310X_MODE1_TRNSCVCTRL_BIT); + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_ECHOSUPR_BIT, + MAX310X_MODE2_ECHOSUPR_BIT); + } else { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, 0); + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_ECHOSUPR_BIT, 0); + } + return 0; + case TIOCGRS485: + memset(&rs485, 0, sizeof(rs485)); + val = max310x_port_read(port, MAX310X_MODE1_REG); + rs485.flags = (val & MAX310X_MODE1_TRNSCVCTRL_BIT) ? + SER_RS485_ENABLED : 0; + rs485.flags |= SER_RS485_RTS_ON_SEND; + val = max310x_port_read(port, MAX310X_HDPIXDELAY_REG); + rs485.delay_rts_before_send = val >> 4; + rs485.delay_rts_after_send = val & 0x0f; + if (copy_to_user((void __user *)arg, &rs485, sizeof(rs485))) + return -EFAULT; + return 0; + default: + break; + } +#endif + + return -ENOIOCTLCMD; +} + static int max310x_startup(struct uart_port *port) { - unsigned int val, line = port->line; struct max310x_port *s = dev_get_drvdata(port->dev); + unsigned int val; s->devtype->power(port, 1); - /* Configure baud rate, 9600 as default */ - max310x_set_baud(port, 9600); - - /* Configure LCR register, 8N1 mode by default */ - max310x_port_write(port, MAX310X_LCR_REG, MAX310X_LCR_WORD_LEN_8); - /* Configure MODE1 register */ max310x_port_update(port, MAX310X_MODE1_REG, - MAX310X_MODE1_TRNSCVCTRL_BIT, - (s->pdata->uart_flags[line] & MAX310X_AUTO_DIR_CTRL) - ? MAX310X_MODE1_TRNSCVCTRL_BIT : 0); - - /* Configure MODE2 register */ - val = MAX310X_MODE2_RXEMPTINV_BIT; - if (s->pdata->uart_flags[line] & MAX310X_LOOPBACK) - val |= MAX310X_MODE2_LOOPBACK_BIT; - if (s->pdata->uart_flags[line] & MAX310X_ECHO_SUPRESS) - val |= MAX310X_MODE2_ECHOSUPR_BIT; - - /* Reset FIFOs */ - val |= MAX310X_MODE2_FIFORST_BIT; + MAX310X_MODE1_TRNSCVCTRL_BIT, 0); + + /* Configure MODE2 register & Reset FIFOs*/ + val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT; max310x_port_write(port, MAX310X_MODE2_REG, val); max310x_port_update(port, MAX310X_MODE2_REG, MAX310X_MODE2_FIFORST_BIT, 0); @@ -989,6 +1018,7 @@ static const struct uart_ops max310x_ops = { .release_port = max310x_null_void, .config_port = max310x_config_port, .verify_port = max310x_verify_port, + .ioctl = max310x_ioctl, }; static int __maybe_unused max310x_suspend(struct device *dev) @@ -1017,6 +1047,8 @@ static int __maybe_unused max310x_resume(struct device *dev) return 0; } +static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); + #ifdef CONFIG_GPIOLIB static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset) { @@ -1063,23 +1095,16 @@ static int max310x_gpio_direction_output(struct gpio_chip *chip, } #endif -static int max310x_probe(struct device *dev, int is_spi, - struct max310x_devtype *devtype, int irq) +static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, + struct regmap *regmap, int irq, unsigned long flags) { + int i, ret, fmin, fmax, freq, uartclk; + struct clk *clk_osc, *clk_xtal; struct max310x_port *s; - struct max310x_pdata *pdata = dev_get_platdata(dev); - int i, ret, uartclk; - - /* Check for IRQ */ - if (irq <= 0) { - dev_err(dev, "No IRQ specified\n"); - return -ENOTSUPP; - } + bool xtal = false; - if (!pdata) { - dev_err(dev, "No platform data supplied\n"); - return -EINVAL; - } + if (IS_ERR(regmap)) + return PTR_ERR(regmap); /* Alloc port structure */ s = devm_kzalloc(dev, sizeof(*s) + @@ -1089,52 +1114,44 @@ static int max310x_probe(struct device *dev, int is_spi, return -ENOMEM; } - /* Check input frequency */ - if ((pdata->driver_flags & MAX310X_EXT_CLK) && - ((pdata->frequency < 500000) || (pdata->frequency > 35000000))) - goto err_freq; - /* Check frequency for quartz */ - if (!(pdata->driver_flags & MAX310X_EXT_CLK) && - ((pdata->frequency < 1000000) || (pdata->frequency > 4000000))) - goto err_freq; - - s->pdata = pdata; - s->devtype = devtype; - dev_set_drvdata(dev, s); - - mutex_init(&s->mutex); + clk_osc = devm_clk_get(dev, "osc"); + clk_xtal = devm_clk_get(dev, "xtal"); + if (!IS_ERR(clk_osc)) { + s->clk = clk_osc; + fmin = 500000; + fmax = 35000000; + } else if (!IS_ERR(clk_xtal)) { + s->clk = clk_xtal; + fmin = 1000000; + fmax = 4000000; + xtal = true; + } else if (PTR_ERR(clk_osc) == -EPROBE_DEFER || + PTR_ERR(clk_xtal) == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else { + dev_err(dev, "Cannot get clock\n"); + return -EINVAL; + } - /* Setup regmap */ - s->regcfg.reg_bits = 8; - s->regcfg.val_bits = 8; - s->regcfg.read_flag_mask = 0x00; - s->regcfg.write_flag_mask = 0x80; - s->regcfg.cache_type = REGCACHE_RBTREE; - s->regcfg.writeable_reg = max310x_reg_writeable; - s->regcfg.volatile_reg = max310x_reg_volatile; - s->regcfg.precious_reg = max310x_reg_precious; - s->regcfg.max_register = devtype->nr * 0x20 - 1; - - if (IS_ENABLED(CONFIG_SPI_MASTER) && is_spi) { - struct spi_device *spi = to_spi_device(dev); - - s->regmap = devm_regmap_init_spi(spi, &s->regcfg); - } else - return -ENOTSUPP; + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; - if (IS_ERR(s->regmap)) { - dev_err(dev, "Failed to initialize register map\n"); - return PTR_ERR(s->regmap); + freq = clk_get_rate(s->clk); + /* Check frequency limits */ + if (freq < fmin || freq > fmax) { + ret = -ERANGE; + goto out_clk; } - /* Board specific configure */ - if (s->pdata->init) - s->pdata->init(); + s->regmap = regmap; + s->devtype = devtype; + dev_set_drvdata(dev, s); /* Check device to ensure we are talking to what we expect */ ret = devtype->detect(dev); if (ret) - return ret; + goto out_clk; for (i = 0; i < devtype->nr; i++) { unsigned int offs = i << 5; @@ -1156,7 +1173,7 @@ static int max310x_probe(struct device *dev, int is_spi, MAX310X_MODE1_AUTOSLEEP_BIT); } - uartclk = max310x_set_ref_clk(s); + uartclk = max310x_set_ref_clk(s, freq, xtal); dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); /* Register UART driver */ @@ -1168,9 +1185,28 @@ static int max310x_probe(struct device *dev, int is_spi, ret = uart_register_driver(&s->uart); if (ret) { dev_err(dev, "Registering UART driver failed\n"); - return ret; + goto out_clk; } +#ifdef CONFIG_GPIOLIB + /* Setup GPIO cotroller */ + s->gpio.owner = THIS_MODULE; + s->gpio.dev = dev; + s->gpio.label = dev_name(dev); + s->gpio.direction_input = max310x_gpio_direction_input; + s->gpio.get = max310x_gpio_get; + s->gpio.direction_output= max310x_gpio_direction_output; + s->gpio.set = max310x_gpio_set; + s->gpio.base = -1; + s->gpio.ngpio = devtype->nr * 4; + s->gpio.can_sleep = 1; + ret = gpiochip_add(&s->gpio); + if (ret) + goto out_uart; +#endif + + mutex_init(&s->mutex); + for (i = 0; i < devtype->nr; i++) { /* Initialize port data */ s->p[i].port.line = i; @@ -1178,8 +1214,7 @@ static int max310x_probe(struct device *dev, int is_spi, s->p[i].port.irq = irq; s->p[i].port.type = PORT_MAX310X; s->p[i].port.fifosize = MAX310X_FIFO_SIZE; - s->p[i].port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE | - UPF_LOW_LATENCY; + s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; s->p[i].port.iotype = UPIO_PORT; s->p[i].port.iobase = i * 0x20; s->p[i].port.membase = (void __iomem *)~0; @@ -1195,48 +1230,35 @@ static int max310x_probe(struct device *dev, int is_spi, MAX310X_MODE1_IRQSEL_BIT); /* Initialize queue for start TX */ INIT_WORK(&s->p[i].tx_work, max310x_wq_proc); + /* Initialize queue for changing mode */ + INIT_WORK(&s->p[i].md_work, max310x_md_proc); /* Register port */ uart_add_one_port(&s->uart, &s->p[i].port); /* Go to suspend mode */ devtype->power(&s->p[i].port, 0); } -#ifdef CONFIG_GPIOLIB - /* Setup GPIO cotroller */ - if (s->pdata->gpio_base) { - s->gpio.owner = THIS_MODULE; - s->gpio.dev = dev; - s->gpio.label = dev_name(dev); - s->gpio.direction_input = max310x_gpio_direction_input; - s->gpio.get = max310x_gpio_get; - s->gpio.direction_output= max310x_gpio_direction_output; - s->gpio.set = max310x_gpio_set; - s->gpio.base = s->pdata->gpio_base; - s->gpio.ngpio = devtype->nr * 4; - s->gpio.can_sleep = 1; - if (!gpiochip_add(&s->gpio)) - s->gpio_used = 1; - } else - dev_info(dev, "GPIO support not enabled\n"); -#endif - /* Setup interrupt */ ret = devm_request_threaded_irq(dev, irq, NULL, max310x_ist, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - dev_name(dev), s); - if (ret) { - dev_err(dev, "Unable to reguest IRQ %i\n", irq); + IRQF_ONESHOT | flags, dev_name(dev), s); + if (!ret) + return 0; + + dev_err(dev, "Unable to reguest IRQ %i\n", irq); + + mutex_destroy(&s->mutex); + #ifdef CONFIG_GPIOLIB - if (s->gpio_used) - WARN_ON(gpiochip_remove(&s->gpio)); + WARN_ON(gpiochip_remove(&s->gpio)); + +out_uart: #endif - } + uart_unregister_driver(&s->uart); - return ret; +out_clk: + clk_disable_unprepare(s->clk); -err_freq: - dev_err(dev, "Frequency parameter incorrect\n"); - return -EINVAL; + return ret; } static int max310x_remove(struct device *dev) @@ -1244,30 +1266,51 @@ static int max310x_remove(struct device *dev) struct max310x_port *s = dev_get_drvdata(dev); int i, ret = 0; +#ifdef CONFIG_GPIOLIB + ret = gpiochip_remove(&s->gpio); + if (ret) + return ret; +#endif + for (i = 0; i < s->uart.nr; i++) { cancel_work_sync(&s->p[i].tx_work); + cancel_work_sync(&s->p[i].md_work); uart_remove_one_port(&s->uart, &s->p[i].port); s->devtype->power(&s->p[i].port, 0); } + mutex_destroy(&s->mutex); uart_unregister_driver(&s->uart); - -#ifdef CONFIG_GPIOLIB - if (s->gpio_used) - ret = gpiochip_remove(&s->gpio); -#endif - - if (s->pdata->exit) - s->pdata->exit(); + clk_disable_unprepare(s->clk); return ret; } +static const struct of_device_id __maybe_unused max310x_dt_ids[] = { + { .compatible = "maxim,max3107", .data = &max3107_devtype, }, + { .compatible = "maxim,max3108", .data = &max3108_devtype, }, + { .compatible = "maxim,max3109", .data = &max3109_devtype, }, + { .compatible = "maxim,max14830", .data = &max14830_devtype }, + { } +}; +MODULE_DEVICE_TABLE(of, max310x_dt_ids); + +static struct regmap_config regcfg = { + .reg_bits = 8, + .val_bits = 8, + .write_flag_mask = 0x80, + .cache_type = REGCACHE_RBTREE, + .writeable_reg = max310x_reg_writeable, + .volatile_reg = max310x_reg_volatile, + .precious_reg = max310x_reg_precious, +}; + #ifdef CONFIG_SPI_MASTER static int max310x_spi_probe(struct spi_device *spi) { - struct max310x_devtype *devtype = - (struct max310x_devtype *)spi_get_device_id(spi)->driver_data; + struct max310x_devtype *devtype; + unsigned long flags = 0; + struct regmap *regmap; int ret; /* Setup SPI bus */ @@ -1275,12 +1318,25 @@ static int max310x_spi_probe(struct spi_device *spi) spi->mode = spi->mode ? : SPI_MODE_0; spi->max_speed_hz = spi->max_speed_hz ? : 26000000; ret = spi_setup(spi); - if (ret) { - dev_err(&spi->dev, "SPI setup failed\n"); + if (ret) return ret; + + if (spi->dev.of_node) { + const struct of_device_id *of_id = + of_match_device(max310x_dt_ids, &spi->dev); + + devtype = (struct max310x_devtype *)of_id->data; + } else { + const struct spi_device_id *id_entry = spi_get_device_id(spi); + + devtype = (struct max310x_devtype *)id_entry->driver_data; + flags = IRQF_TRIGGER_FALLING; } - return max310x_probe(&spi->dev, 1, devtype, spi->irq); + regcfg.max_register = devtype->nr * 0x20 - 1; + regmap = devm_regmap_init_spi(spi, ®cfg); + + return max310x_probe(&spi->dev, devtype, regmap, spi->irq, flags); } static int max310x_spi_remove(struct spi_device *spi) @@ -1288,8 +1344,6 @@ static int max310x_spi_remove(struct spi_device *spi) return max310x_remove(&spi->dev); } -static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); - static const struct spi_device_id max310x_id_table[] = { { "max3107", (kernel_ulong_t)&max3107_devtype, }, { "max3108", (kernel_ulong_t)&max3108_devtype, }, @@ -1301,9 +1355,10 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table); static struct spi_driver max310x_uart_driver = { .driver = { - .name = MAX310X_NAME, - .owner = THIS_MODULE, - .pm = &max310x_pm_ops, + .name = MAX310X_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(max310x_dt_ids), + .pm = &max310x_pm_ops, }, .probe = max310x_spi_probe, .remove = max310x_spi_remove, |