diff options
Diffstat (limited to 'drivers/tty/serial/mcf.c')
| -rw-r--r-- | drivers/tty/serial/mcf.c | 7 |
1 files changed, 3 insertions, 4 deletions
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index 10496672dfdb..a9b0ab38a68c 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -3,7 +3,7 @@ /* * mcf.c -- Freescale ColdFire UART driver * - * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com> + * (C) Copyright 2003-2007, Greg Ungerer <gerg@uclinux.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -198,7 +198,6 @@ static void mcf_shutdown(struct uart_port *port) static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); unsigned long flags; unsigned int baud, baudclk; #if defined(CONFIG_M5272) @@ -441,7 +440,6 @@ static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) /* Enable or disable the RS485 support */ static int mcf_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) { - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); unsigned char mr1, mr2; /* Get mode registers */ @@ -631,6 +629,7 @@ static int mcf_probe(struct platform_device *pdev) port->mapbase = platp[i].mapbase; port->membase = (platp[i].membase) ? platp[i].membase : (unsigned char __iomem *) platp[i].mapbase; + port->dev = &pdev->dev; port->iotype = SERIAL_IO_MEM; port->irq = platp[i].irq; port->uartclk = MCF_BUSCLK; @@ -702,7 +701,7 @@ static void __exit mcf_exit(void) module_init(mcf_init); module_exit(mcf_exit); -MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>"); +MODULE_AUTHOR("Greg Ungerer <gerg@uclinux.org>"); MODULE_DESCRIPTION("Freescale ColdFire UART driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:mcfuart"); |