diff options
Diffstat (limited to 'drivers/tty/serial')
32 files changed, 804 insertions, 1293 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index e33d38cb170f..69932b7556cf 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2433,6 +2433,24 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, serial_dl_write(up, quot); /* + * XR17V35x UARTs have an extra fractional divisor register (DLD) + * + * We need to recalculate all of the registers, because DLM and DLL + * are already rounded to a whole integer. + * + * When recalculating we use a 32x clock instead of a 16x clock to + * allow 1-bit for rounding in the fractional part. + */ + if (up->port.type == PORT_XR17V35X) { + unsigned int baud_x32 = (port->uartclk * 2) / baud; + u16 quot = baud_x32 / 32; + u8 quot_frac = DIV_ROUND_CLOSEST(baud_x32 % 32, 2); + + serial_dl_write(up, quot); + serial_port_out(port, 0x2, quot_frac & 0xf); + } + + /* * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR * is written without DLAB set, this mode will be disabled. */ @@ -2670,6 +2688,10 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (port->type == PORT_16550A && port->iotype == UPIO_AU) up->bugs |= UART_BUG_NOMSR; + /* HW bugs may trigger IRQ while IIR == NO_INT */ + if (port->type == PORT_TEGRA) + up->bugs |= UART_BUG_NOMSR; + if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) autoconfig_irq(up); diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 06525f10e364..ed3113576740 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -14,7 +14,6 @@ * raised, the LCR needs to be rewritten and the uart status register read. */ #include <linux/device.h> -#include <linux/init.h> #include <linux/io.h> #include <linux/module.h> #include <linux/serial_8250.h> @@ -274,7 +273,6 @@ static int dw8250_probe_of(struct uart_port *p, return 0; } -#ifdef CONFIG_ACPI static int dw8250_probe_acpi(struct uart_8250_port *up, struct dw8250_data *data) { @@ -302,13 +300,6 @@ static int dw8250_probe_acpi(struct uart_8250_port *up, return 0; } -#else -static inline int dw8250_probe_acpi(struct uart_8250_port *up, - struct dw8250_data *data) -{ - return -ENODEV; -} -#endif /* CONFIG_ACPI */ static int dw8250_probe(struct platform_device *pdev) { @@ -400,7 +391,7 @@ static int dw8250_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int dw8250_suspend(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); @@ -418,7 +409,7 @@ static int dw8250_resume(struct device *dev) return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ #ifdef CONFIG_PM_RUNTIME static int dw8250_runtime_suspend(struct device *dev) diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c index d1a9078003bd..56c87232b6a0 100644 --- a/drivers/tty/serial/8250/8250_em.c +++ b/drivers/tty/serial/8250/8250_em.c @@ -18,7 +18,6 @@ */ #include <linux/device.h> -#include <linux/init.h> #include <linux/io.h> #include <linux/module.h> #include <linux/serial_8250.h> diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 4697a514b80a..0ff3e3624d4c 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -11,7 +11,6 @@ */ #undef DEBUG #include <linux/module.h> -#include <linux/init.h> #include <linux/pci.h> #include <linux/string.h> #include <linux/kernel.h> @@ -784,7 +783,8 @@ static int pci_netmos_9900_setup(struct serial_private *priv, { unsigned int bar; - if ((priv->dev->subsystem_device & 0xff00) == 0x3000) { + if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) && + (priv->dev->subsystem_device & 0xff00) == 0x3000) { /* netmos apparently orders BARs by datasheet layout, so serial * ports get BARs 0 and 3 (or 1 and 4 for memmapped) */ @@ -1259,10 +1259,10 @@ static int pci_quatech_init(struct pci_dev *dev) unsigned long base = pci_resource_start(dev, 0); if (base) { u32 tmp; - outl(inl(base + 0x38), base + 0x38); + outl(inl(base + 0x38) | 0x00002000, base + 0x38); tmp = inl(base + 0x3c); outl(tmp | 0x01000000, base + 0x3c); - outl(tmp, base + 0x3c); + outl(tmp &= ~0x01000000, base + 0x3c); } } return 0; @@ -1744,6 +1744,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_TITAN_800E 0xA014 #define PCI_DEVICE_ID_TITAN_200EI 0xA016 #define PCI_DEVICE_ID_TITAN_200EISI 0xA017 +#define PCI_DEVICE_ID_TITAN_200V3 0xA306 #define PCI_DEVICE_ID_TITAN_400V3 0xA310 #define PCI_DEVICE_ID_TITAN_410V3 0xA312 #define PCI_DEVICE_ID_TITAN_800V3 0xA314 @@ -4427,6 +4428,9 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_4_921600 }, diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c index 35d9ab95c5cb..682a2fbe5c06 100644 --- a/drivers/tty/serial/8250/8250_pnp.c +++ b/drivers/tty/serial/8250/8250_pnp.c @@ -12,7 +12,6 @@ * the Free Software Foundation; either version 2 of the License. */ #include <linux/module.h> -#include <linux/init.h> #include <linux/pci.h> #include <linux/pnp.h> #include <linux/string.h> diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 1b74b88e1e1e..4d180c9423ef 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -34,7 +34,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/ptrace.h> #include <linux/slab.h> #include <linux/string.h> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index a3817ab8602f..a3815eaed421 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -181,9 +181,8 @@ config SERIAL_KS8695_CONSOLE config SERIAL_CLPS711X tristate "CLPS711X serial port support" - depends on ARCH_CLPS711X + depends on ARCH_CLPS711X || COMPILE_TEST select SERIAL_CORE - default y help This enables the driver for the on-chip UARTs of the Cirrus Logic EP711x/EP721x/EP731x processors. @@ -1035,7 +1034,7 @@ config SERIAL_MSM_CONSOLE config SERIAL_MSM_HS tristate "MSM UART High Speed: Serial Driver" - depends on ARCH_MSM + depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 select SERIAL_CORE help If you have a machine based on MSM family of SoCs, you @@ -1146,31 +1145,13 @@ config SERIAL_QE This driver supports the QE serial ports on Freescale embedded PowerPC that contain a QUICC Engine. -config SERIAL_SC26XX - tristate "SC2681/SC2692 serial port support" - depends on SNI_RM - select SERIAL_CORE - help - This is a driver for the onboard serial ports of - older RM400 machines. - -config SERIAL_SC26XX_CONSOLE - bool "Console on SC2681/SC2692 serial port" - depends on SERIAL_SC26XX=y - select SERIAL_CORE_CONSOLE - help - Support for Console on SC2681/SC2692 serial ports. - config SERIAL_SCCNXP tristate "SCCNXP serial port support" - depends on !SERIAL_SC26XX select SERIAL_CORE - default n help This selects support for an advanced UART from NXP (Philips). Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92, SC28L202, SCC68681 and SCC68692. - Positioned as a replacement for the driver SC26XX. config SERIAL_SCCNXP_CONSOLE bool "Console on SCCNXP serial port" diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 3068c7722087..3680854fef41 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -47,7 +47,6 @@ obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o obj-$(CONFIG_SERIAL_MPSC) += mpsc.o obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o -obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o obj-$(CONFIG_SERIAL_JSM) += jsm/ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index 33bd8606be62..01c9e72433e1 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -756,9 +756,10 @@ static int pl010_remove(struct amba_device *dev) return 0; } -static int pl010_suspend(struct amba_device *dev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int pl010_suspend(struct device *dev) { - struct uart_amba_port *uap = amba_get_drvdata(dev); + struct uart_amba_port *uap = dev_get_drvdata(dev); if (uap) uart_suspend_port(&amba_reg, &uap->port); @@ -766,15 +767,18 @@ static int pl010_suspend(struct amba_device *dev, pm_message_t state) return 0; } -static int pl010_resume(struct amba_device *dev) +static int pl010_resume(struct device *dev) { - struct uart_amba_port *uap = amba_get_drvdata(dev); + struct uart_amba_port *uap = dev_get_drvdata(dev); if (uap) uart_resume_port(&amba_reg, &uap->port); return 0; } +#endif + +static SIMPLE_DEV_PM_OPS(pl010_dev_pm_ops, pl010_suspend, pl010_resume); static struct amba_id pl010_ids[] = { { @@ -789,12 +793,11 @@ MODULE_DEVICE_TABLE(amba, pl010_ids); static struct amba_driver pl010_driver = { .drv = { .name = "uart-pl010", + .pm = &pl010_dev_pm_ops, }, .id_table = pl010_ids, .probe = pl010_probe, .remove = pl010_remove, - .suspend = pl010_suspend, - .resume = pl010_resume, }; static int __init pl010_init(void) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 7203864992a5..d58783d364e3 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -112,8 +112,6 @@ static struct vendor_data vendor_st = { .get_fifosize = get_fifosize_st, }; -static struct uart_amba_port *amba_ports[UART_NR]; - /* Deals with DMA transactions */ struct pl011_sgbuf { @@ -969,6 +967,8 @@ static void pl011_dma_rx_poll(unsigned long args) spin_lock_irqsave(&uap->port.lock, flags); pl011_dma_rx_stop(uap); + uap->im |= UART011_RXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); spin_unlock_irqrestore(&uap->port.lock, flags); uap->dmarx.running = false; @@ -1216,8 +1216,8 @@ __acquires(&uap->port.lock) dev_dbg(uap->port.dev, "could not trigger RX DMA job " "fall back to interrupt mode again\n"); uap->im |= UART011_RXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); } else { - uap->im &= ~UART011_RXIM; #ifdef CONFIG_DMA_ENGINE /* Start Rx DMA poll */ if (uap->dmarx.poll_rate) { @@ -1229,8 +1229,6 @@ __acquires(&uap->port.lock) } #endif } - - writew(uap->im, uap->port.membase + UART011_IMSC); } spin_lock(&uap->port.lock); } @@ -1513,10 +1511,25 @@ static int pl011_hwinit(struct uart_port *port) return retval; } +static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) +{ + writew(lcr_h, uap->port.membase + uap->lcrh_rx); + if (uap->lcrh_rx != uap->lcrh_tx) { + int i; + /* + * Wait 10 PCLKs before writing LCRH_TX register, + * to get this delay write read only register 10 times + */ + for (i = 0; i < 10; ++i) + writew(0xff, uap->port.membase + UART011_MIS); + writew(lcr_h, uap->port.membase + uap->lcrh_tx); + } +} + static int pl011_startup(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; + unsigned int cr, lcr_h, fbrd, ibrd; int retval; retval = pl011_hwinit(port); @@ -1535,32 +1548,36 @@ static int pl011_startup(struct uart_port *port) writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); /* - * Provoke TX FIFO interrupt into asserting. + * Provoke TX FIFO interrupt into asserting. Taking care to preserve + * baud rate and data format specified by FBRD, IBRD and LCRH as the + * UART may already be in use as a console. */ + spin_lock_irq(&uap->port.lock); + + fbrd = readw(uap->port.membase + UART011_FBRD); + ibrd = readw(uap->port.membase + UART011_IBRD); + lcr_h = readw(uap->port.membase + uap->lcrh_rx); + cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE; writew(cr, uap->port.membase + UART011_CR); writew(0, uap->port.membase + UART011_FBRD); writew(1, uap->port.membase + UART011_IBRD); - writew(0, uap->port.membase + uap->lcrh_rx); - if (uap->lcrh_tx != uap->lcrh_rx) { - int i; - /* - * Wait 10 PCLKs before writing LCRH_TX register, - * to get this delay write read only register 10 times - */ - for (i = 0; i < 10; ++i) - writew(0xff, uap->port.membase + UART011_MIS); - writew(0, uap->port.membase + uap->lcrh_tx); - } + pl011_write_lcr_h(uap, 0); writew(0, uap->port.membase + UART01x_DR); while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) barrier(); + writew(fbrd, uap->port.membase + UART011_FBRD); + writew(ibrd, uap->port.membase + UART011_IBRD); + pl011_write_lcr_h(uap, lcr_h); + /* restore RTS and DTR */ cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR); cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; writew(cr, uap->port.membase + UART011_CR); + spin_unlock_irq(&uap->port.lock); + /* * initialise the old status of the modem signals */ @@ -1629,11 +1646,13 @@ static void pl011_shutdown(struct uart_port *port) * it during startup(). */ uap->autorts = false; + spin_lock_irq(&uap->port.lock); cr = readw(uap->port.membase + UART011_CR); uap->old_cr = cr; cr &= UART011_CR_RTS | UART011_CR_DTR; cr |= UART01x_CR_UARTEN | UART011_CR_TXE; writew(cr, uap->port.membase + UART011_CR); + spin_unlock_irq(&uap->port.lock); /* * disable break condition and fifos @@ -1797,17 +1816,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, * UART011_FBRD & UART011_IBRD. * ----------^----------^----------^----------^----- */ - writew(lcr_h, port->membase + uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) { - int i; - /* - * Wait 10 PCLKs before writing LCRH_TX register, - * to get this delay write read only register 10 times - */ - for (i = 0; i < 10; ++i) - writew(0xff, uap->port.membase + UART011_MIS); - writew(lcr_h, port->membase + uap->lcrh_tx); - } + pl011_write_lcr_h(uap, lcr_h); writew(old_cr, port->membase + UART011_CR); spin_unlock_irqrestore(&port->lock, flags); @@ -2169,10 +2178,10 @@ static int pl011_remove(struct amba_device *dev) return 0; } -#ifdef CONFIG_PM -static int pl011_suspend(struct amba_device *dev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int pl011_suspend(struct device *dev) { - struct uart_amba_port *uap = amba_get_drvdata(dev); + struct uart_amba_port *uap = dev_get_drvdata(dev); if (!uap) return -EINVAL; @@ -2180,9 +2189,9 @@ static int pl011_suspend(struct amba_device *dev, pm_message_t state) return uart_suspend_port(&amba_reg, &uap->port); } -static int pl011_resume(struct amba_device *dev) +static int pl011_resume(struct device *dev) { - struct uart_amba_port *uap = amba_get_drvdata(dev); + struct uart_amba_port *uap = dev_get_drvdata(dev); if (!uap) return -EINVAL; @@ -2191,6 +2200,8 @@ static int pl011_resume(struct amba_device *dev) } #endif +static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume); + static struct amba_id pl011_ids[] = { { .id = 0x00041011, @@ -2210,14 +2221,11 @@ MODULE_DEVICE_TABLE(amba, pl011_ids); static struct amba_driver pl011_driver = { .drv = { .name = "uart-pl011", + .pm = &pl011_dev_pm_ops, }, .id_table = pl011_ids, .probe = pl011_probe, .remove = pl011_remove, -#ifdef CONFIG_PM - .suspend = pl011_suspend, - .resume = pl011_resume, -#endif }; static int __init pl011_init(void) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index c7d99af46a96..a49f10d269b2 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -825,9 +825,6 @@ static void atmel_release_rx_dma(struct uart_port *port) atmel_port->desc_rx = NULL; atmel_port->chan_rx = NULL; atmel_port->cookie_rx = -EINVAL; - - if (!atmel_port->is_usart) - del_timer_sync(&atmel_port->uart_timer); } static void atmel_rx_from_dma(struct uart_port *port) @@ -1229,9 +1226,6 @@ static void atmel_release_rx_pdc(struct uart_port *port) DMA_FROM_DEVICE); kfree(pdc->buf); } - - if (!atmel_port->is_usart) - del_timer_sync(&atmel_port->uart_timer); } static void atmel_rx_from_pdc(struct uart_port *port) @@ -1604,12 +1598,13 @@ static int atmel_startup(struct uart_port *port) /* enable xmit & rcvr */ UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); + setup_timer(&atmel_port->uart_timer, + atmel_uart_timer_callback, + (unsigned long)port); + if (atmel_use_pdc_rx(port)) { /* set UART timeout */ if (!atmel_port->is_usart) { - setup_timer(&atmel_port->uart_timer, - atmel_uart_timer_callback, - (unsigned long)port); mod_timer(&atmel_port->uart_timer, jiffies + uart_poll_timeout(port)); /* set USART timeout */ @@ -1624,9 +1619,6 @@ static int atmel_startup(struct uart_port *port) } else if (atmel_use_dma_rx(port)) { /* set UART timeout */ if (!atmel_port->is_usart) { - setup_timer(&atmel_port->uart_timer, - atmel_uart_timer_callback, - (unsigned long)port); mod_timer(&atmel_port->uart_timer, jiffies + uart_poll_timeout(port)); /* set USART timeout */ @@ -1650,12 +1642,30 @@ static int atmel_startup(struct uart_port *port) static void atmel_shutdown(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + /* - * Ensure everything is stopped. + * Prevent any tasklets being scheduled during + * cleanup + */ + del_timer_sync(&atmel_port->uart_timer); + + /* + * Clear out any scheduled tasklets before + * we destroy the buffers + */ + tasklet_kill(&atmel_port->tasklet); + + /* + * Ensure everything is stopped and + * disable all interrupts, port and break condition. */ atmel_stop_rx(port); atmel_stop_tx(port); + UART_PUT_CR(port, ATMEL_US_RSTSTA); + UART_PUT_IDR(port, -1); + + /* * Shut-down the DMA. */ @@ -1665,10 +1675,10 @@ static void atmel_shutdown(struct uart_port *port) atmel_port->release_tx(port); /* - * Disable all interrupts, port and break condition. + * Reset ring buffer pointers */ - UART_PUT_CR(port, ATMEL_US_RSTSTA); - UART_PUT_IDR(port, -1); + atmel_port->rx_ring.head = 0; + atmel_port->rx_ring.tail = 0; /* * Free the interrupt @@ -2441,11 +2451,12 @@ static int atmel_serial_remove(struct platform_device *pdev) struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); int ret = 0; + tasklet_kill(&atmel_port->tasklet); + device_init_wakeup(&pdev->dev, 0); ret = uart_remove_one_port(&atmel_uart, port); - tasklet_kill(&atmel_port->tasklet); kfree(atmel_port->rx_ring.buf); /* "port" is allocated statically, so we shouldn't free it */ diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index 649d5129c4b4..78e82b017b92 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -29,10 +29,7 @@ #include <linux/sysrq.h> #include <linux/serial.h> #include <linux/serial_core.h> - -#include <bcm63xx_irq.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> +#include <linux/serial_bcm63xx.h> #define BCM63XX_NR_UARTS 2 @@ -81,13 +78,13 @@ static struct uart_port ports[BCM63XX_NR_UARTS]; static inline unsigned int bcm_uart_readl(struct uart_port *port, unsigned int offset) { - return bcm_readl(port->membase + offset); + return __raw_readl(port->membase + offset); } static inline void bcm_uart_writel(struct uart_port *port, unsigned int value, unsigned int offset) { - bcm_writel(value, port->membase + offset); + __raw_writel(value, port->membase + offset); } /* diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index 8d0b994357c8..b0eacb83f831 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -21,44 +21,66 @@ #include <linux/console.h> #include <linux/serial_core.h> #include <linux/serial.h> -#include <linux/io.h> #include <linux/clk.h> +#include <linux/io.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/ioport.h> +#include <linux/of.h> #include <linux/platform_device.h> +#include <linux/regmap.h> -#include <mach/hardware.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/clps711x.h> -#define UART_CLPS711X_NAME "uart-clps711x" +#define UART_CLPS711X_DEVNAME "ttyCL" #define UART_CLPS711X_NR 2 #define UART_CLPS711X_MAJOR 204 #define UART_CLPS711X_MINOR 40 -#define UBRLCR(port) ((port)->line ? UBRLCR2 : UBRLCR1) -#define UARTDR(port) ((port)->line ? UARTDR2 : UARTDR1) -#define SYSFLG(port) ((port)->line ? SYSFLG2 : SYSFLG1) -#define SYSCON(port) ((port)->line ? SYSCON2 : SYSCON1) -#define TX_IRQ(port) ((port)->line ? IRQ_UTXINT2 : IRQ_UTXINT1) -#define RX_IRQ(port) ((port)->line ? IRQ_URXINT2 : IRQ_URXINT1) +#define UARTDR_OFFSET (0x00) +#define UBRLCR_OFFSET (0x40) + +#define UARTDR_FRMERR (1 << 8) +#define UARTDR_PARERR (1 << 9) +#define UARTDR_OVERR (1 << 10) + +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) +#define UBRLCR_BREAK (1 << 12) +#define UBRLCR_PRTEN (1 << 13) +#define UBRLCR_EVENPRT (1 << 14) +#define UBRLCR_XSTOP (1 << 15) +#define UBRLCR_FIFOEN (1 << 16) +#define UBRLCR_WRDLEN5 (0 << 17) +#define UBRLCR_WRDLEN6 (1 << 17) +#define UBRLCR_WRDLEN7 (2 << 17) +#define UBRLCR_WRDLEN8 (3 << 17) +#define UBRLCR_WRDLEN_MASK (3 << 17) struct clps711x_port { - struct uart_driver uart; - struct clk *uart_clk; - struct uart_port port[UART_CLPS711X_NR]; - int tx_enabled[UART_CLPS711X_NR]; -#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE - struct console console; -#endif + struct uart_port port; + unsigned int tx_enabled; + int rx_irq; + struct regmap *syscon; + bool use_ms; +}; + +static struct uart_driver clps711x_uart = { + .owner = THIS_MODULE, + .driver_name = UART_CLPS711X_DEVNAME, + .dev_name = UART_CLPS711X_DEVNAME, + .major = UART_CLPS711X_MAJOR, + .minor = UART_CLPS711X_MINOR, + .nr = UART_CLPS711X_NR, }; static void uart_clps711x_stop_tx(struct uart_port *port) { struct clps711x_port *s = dev_get_drvdata(port->dev); - if (s->tx_enabled[port->line]) { - disable_irq(TX_IRQ(port)); - s->tx_enabled[port->line] = 0; + if (s->tx_enabled) { + disable_irq(port->irq); + s->tx_enabled = 0; } } @@ -66,33 +88,27 @@ static void uart_clps711x_start_tx(struct uart_port *port) { struct clps711x_port *s = dev_get_drvdata(port->dev); - if (!s->tx_enabled[port->line]) { - enable_irq(TX_IRQ(port)); - s->tx_enabled[port->line] = 1; + if (!s->tx_enabled) { + s->tx_enabled = 1; + enable_irq(port->irq); } } -static void uart_clps711x_stop_rx(struct uart_port *port) -{ - disable_irq(RX_IRQ(port)); -} - -static void uart_clps711x_enable_ms(struct uart_port *port) -{ - /* Do nothing */ -} - static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id) { struct uart_port *port = dev_id; - unsigned int status, ch, flg; + struct clps711x_port *s = dev_get_drvdata(port->dev); + unsigned int status, flg; + u16 ch; for (;;) { - status = clps_readl(SYSFLG(port)); - if (status & SYSFLG_URXFE) + u32 sysflg = 0; + + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + if (sysflg & SYSFLG_URXFE) break; - ch = clps_readw(UARTDR(port)); + ch = readw(port->membase + UARTDR_OFFSET); status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR); ch &= 0xff; @@ -138,23 +154,29 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id) struct circ_buf *xmit = &port->state->xmit; if (port->x_char) { - clps_writew(port->x_char, UARTDR(port)); + writew(port->x_char, port->membase + UARTDR_OFFSET); port->icount.tx++; port->x_char = 0; return IRQ_HANDLED; } if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - disable_irq_nosync(TX_IRQ(port)); - s->tx_enabled[port->line] = 0; + if (s->tx_enabled) { + disable_irq_nosync(port->irq); + s->tx_enabled = 0; + } return IRQ_HANDLED; } while (!uart_circ_empty(xmit)) { - clps_writew(xmit->buf[xmit->tail], UARTDR(port)); + u32 sysflg = 0; + + writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; - if (clps_readl(SYSFLG(port) & SYSFLG_UTXFF)) + + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + if (sysflg & SYSFLG_UTXFF) break; } @@ -166,20 +188,28 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id) static unsigned int uart_clps711x_tx_empty(struct uart_port *port) { - return (clps_readl(SYSFLG(port) & SYSFLG_UBUSY)) ? 0 : TIOCSER_TEMT; + struct clps711x_port *s = dev_get_drvdata(port->dev); + u32 sysflg = 0; + + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + + return (sysflg & SYSFLG_UBUSY) ? 0 : TIOCSER_TEMT; } static unsigned int uart_clps711x_get_mctrl(struct uart_port *port) { - unsigned int status, result = 0; + struct clps711x_port *s = dev_get_drvdata(port->dev); + unsigned int result = 0; + + if (s->use_ms) { + u32 sysflg = 0; - if (port->line == 0) { - status = clps_readl(SYSFLG1); - if (status & SYSFLG1_DCD) + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + if (sysflg & SYSFLG1_DCD) result |= TIOCM_CAR; - if (status & SYSFLG1_DSR) + if (sysflg & SYSFLG1_DSR) result |= TIOCM_DSR; - if (status & SYSFLG1_CTS) + if (sysflg & SYSFLG1_CTS) result |= TIOCM_CTS; } else result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; @@ -194,65 +224,53 @@ static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl) static void uart_clps711x_break_ctl(struct uart_port *port, int break_state) { - unsigned long flags; unsigned int ubrlcr; - spin_lock_irqsave(&port->lock, flags); - - ubrlcr = clps_readl(UBRLCR(port)); + ubrlcr = readl(port->membase + UBRLCR_OFFSET); if (break_state) ubrlcr |= UBRLCR_BREAK; else ubrlcr &= ~UBRLCR_BREAK; - clps_writel(ubrlcr, UBRLCR(port)); + writel(ubrlcr, port->membase + UBRLCR_OFFSET); +} + +static void uart_clps711x_set_ldisc(struct uart_port *port, int ld) +{ + if (!port->line) { + struct clps711x_port *s = dev_get_drvdata(port->dev); - spin_unlock_irqrestore(&port->lock, flags); + regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON1_SIREN, + (ld == N_IRDA) ? SYSCON1_SIREN : 0); + } } static int uart_clps711x_startup(struct uart_port *port) { struct clps711x_port *s = dev_get_drvdata(port->dev); - int ret; - - s->tx_enabled[port->line] = 1; - /* Allocate the IRQs */ - ret = devm_request_irq(port->dev, TX_IRQ(port), uart_clps711x_int_tx, - 0, UART_CLPS711X_NAME " TX", port); - if (ret) - return ret; - - ret = devm_request_irq(port->dev, RX_IRQ(port), uart_clps711x_int_rx, - 0, UART_CLPS711X_NAME " RX", port); - if (ret) { - devm_free_irq(port->dev, TX_IRQ(port), port); - return ret; - } /* Disable break */ - clps_writel(clps_readl(UBRLCR(port)) & ~UBRLCR_BREAK, UBRLCR(port)); + writel(readl(port->membase + UBRLCR_OFFSET) & ~UBRLCR_BREAK, + port->membase + UBRLCR_OFFSET); /* Enable the port */ - clps_writel(clps_readl(SYSCON(port)) | SYSCON_UARTEN, SYSCON(port)); - - return 0; + return regmap_update_bits(s->syscon, SYSCON_OFFSET, + SYSCON_UARTEN, SYSCON_UARTEN); } static void uart_clps711x_shutdown(struct uart_port *port) { - /* Free the interrupts */ - devm_free_irq(port->dev, TX_IRQ(port), port); - devm_free_irq(port->dev, RX_IRQ(port), port); + struct clps711x_port *s = dev_get_drvdata(port->dev); /* Disable the port */ - clps_writel(clps_readl(SYSCON(port)) & ~SYSCON_UARTEN, SYSCON(port)); + regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0); } static void uart_clps711x_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - unsigned int ubrlcr, baud, quot; - unsigned long flags; + u32 ubrlcr; + unsigned int baud, quot; /* Mask termios capabilities we don't support */ termios->c_cflag &= ~CMSPAR; @@ -291,8 +309,6 @@ static void uart_clps711x_set_termios(struct uart_port *port, /* Enable FIFO */ ubrlcr |= UBRLCR_FIFOEN; - spin_lock_irqsave(&port->lock, flags); - /* Set read status mask */ port->read_status_mask = UARTDR_OVERR; if (termios->c_iflag & INPCK) @@ -306,9 +322,7 @@ static void uart_clps711x_set_termios(struct uart_port *port, uart_update_timeout(port, termios->c_cflag, baud); - clps_writel(ubrlcr | (quot - 1), UBRLCR(port)); - - spin_unlock_irqrestore(&port->lock, flags); + writel(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET); } static const char *uart_clps711x_type(struct uart_port *port) @@ -322,14 +336,12 @@ static void uart_clps711x_config_port(struct uart_port *port, int flags) port->type = PORT_CLPS711X; } -static void uart_clps711x_release_port(struct uart_port *port) +static void uart_clps711x_nop_void(struct uart_port *port) { - /* Do nothing */ } -static int uart_clps711x_request_port(struct uart_port *port) +static int uart_clps711x_nop_int(struct uart_port *port) { - /* Do nothing */ return 0; } @@ -339,181 +351,237 @@ static const struct uart_ops uart_clps711x_ops = { .get_mctrl = uart_clps711x_get_mctrl, .stop_tx = uart_clps711x_stop_tx, .start_tx = uart_clps711x_start_tx, - .stop_rx = uart_clps711x_stop_rx, - .enable_ms = uart_clps711x_enable_ms, + .stop_rx = uart_clps711x_nop_void, + .enable_ms = uart_clps711x_nop_void, .break_ctl = uart_clps711x_break_ctl, + .set_ldisc = uart_clps711x_set_ldisc, .startup = uart_clps711x_startup, .shutdown = uart_clps711x_shutdown, .set_termios = uart_clps711x_set_termios, .type = uart_clps711x_type, .config_port = uart_clps711x_config_port, - .release_port = uart_clps711x_release_port, - .request_port = uart_clps711x_request_port, + .release_port = uart_clps711x_nop_void, + .request_port = uart_clps711x_nop_int, }; #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE static void uart_clps711x_console_putchar(struct uart_port *port, int ch) { - while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF) - barrier(); + struct clps711x_port *s = dev_get_drvdata(port->dev); + u32 sysflg = 0; + + do { + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + } while (sysflg & SYSFLG_UTXFF); - clps_writew(ch, UARTDR(port)); + writew(ch, port->membase + UARTDR_OFFSET); } static void uart_clps711x_console_write(struct console *co, const char *c, unsigned n) { - struct clps711x_port *s = (struct clps711x_port *)co->data; - struct uart_port *port = &s->port[co->index]; - u32 syscon; - - /* Ensure that the port is enabled */ - syscon = clps_readl(SYSCON(port)); - clps_writel(syscon | SYSCON_UARTEN, SYSCON(port)); + struct uart_port *port = clps711x_uart.state[co->index].uart_port; + struct clps711x_port *s = dev_get_drvdata(port->dev); + u32 sysflg = 0; uart_console_write(port, c, n, uart_clps711x_console_putchar); /* Wait for transmitter to become empty */ - while (clps_readl(SYSFLG(port)) & SYSFLG_UBUSY) - barrier(); - - /* Restore the uart state */ - clps_writel(syscon, SYSCON(port)); + do { + regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); + } while (sysflg & SYSFLG_UBUSY); } -static void uart_clps711x_console_get_options(struct uart_port *port, - int *baud, int *parity, - int *bits) +static int uart_clps711x_console_setup(struct console *co, char *options) { - if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) { - unsigned int ubrlcr, quot; + int baud = 38400, bits = 8, parity = 'n', flow = 'n'; + int ret, index = co->index; + struct clps711x_port *s; + struct uart_port *port; + unsigned int quot; + u32 ubrlcr; - ubrlcr = clps_readl(UBRLCR(port)); + if (index < 0 || index >= UART_CLPS711X_NR) + return -EINVAL; - *parity = 'n'; - if (ubrlcr & UBRLCR_PRTEN) { - if (ubrlcr & UBRLCR_EVENPRT) - *parity = 'e'; - else - *parity = 'o'; - } + port = clps711x_uart.state[index].uart_port; + if (!port) + return -ENODEV; - if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7) - *bits = 7; - else - *bits = 8; + s = dev_get_drvdata(port->dev); - quot = ubrlcr & UBRLCR_BAUD_MASK; - *baud = port->uartclk / (16 * (quot + 1)); - } -} + if (!options) { + u32 syscon = 0; -static int uart_clps711x_console_setup(struct console *co, char *options) -{ - int baud = 38400, bits = 8, parity = 'n', flow = 'n'; - struct clps711x_port *s = (struct clps711x_port *)co->data; - struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0]; + regmap_read(s->syscon, SYSCON_OFFSET, &syscon); + if (syscon & SYSCON_UARTEN) { + ubrlcr = readl(port->membase + UBRLCR_OFFSET); + + if (ubrlcr & UBRLCR_PRTEN) { + if (ubrlcr & UBRLCR_EVENPRT) + parity = 'e'; + else + parity = 'o'; + } + + if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7) + bits = 7; - if (options) + quot = ubrlcr & UBRLCR_BAUD_MASK; + baud = port->uartclk / (16 * (quot + 1)); + } + } else uart_parse_options(options, &baud, &parity, &bits, &flow); - else - uart_clps711x_console_get_options(port, &baud, &parity, &bits); - return uart_set_options(port, co, baud, parity, bits, flow); + ret = uart_set_options(port, co, baud, parity, bits, flow); + if (ret) + return ret; + + return regmap_update_bits(s->syscon, SYSCON_OFFSET, + SYSCON_UARTEN, SYSCON_UARTEN); } + +static struct console clps711x_console = { + .name = UART_CLPS711X_DEVNAME, + .device = uart_console_device, + .write = uart_clps711x_console_write, + .setup = uart_clps711x_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; #endif static int uart_clps711x_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; + int ret, index = np ? of_alias_get_id(np, "serial") : pdev->id; struct clps711x_port *s; - int ret, i; + struct resource *res; + struct clk *uart_clk; - s = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_port), GFP_KERNEL); - if (!s) { - dev_err(&pdev->dev, "Error allocating port structure\n"); + if (index < 0 || index >= UART_CLPS711X_NR) + return -EINVAL; + + s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); + if (!s) return -ENOMEM; + + uart_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(uart_clk)) + return PTR_ERR(uart_clk); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + s->port.membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(s->port.membase)) + return PTR_ERR(s->port.membase); + + s->port.irq = platform_get_irq(pdev, 0); + if (IS_ERR_VALUE(s->port.irq)) + return s->port.irq; + + s->rx_irq = platform_get_irq(pdev, 1); + if (IS_ERR_VALUE(s->rx_irq)) + return s->rx_irq; + + if (!np) { + char syscon_name[9]; + + sprintf(syscon_name, "syscon.%i", index + 1); + s->syscon = syscon_regmap_lookup_by_pdevname(syscon_name); + if (IS_ERR(s->syscon)) + return PTR_ERR(s->syscon); + + s->use_ms = !index; + } else { + s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(s->syscon)) + return PTR_ERR(s->syscon); + + if (!index) + s->use_ms = of_property_read_bool(np, "uart-use-ms"); } + + s->port.line = index; + s->port.dev = &pdev->dev; + s->port.iotype = UPIO_MEM32; + s->port.mapbase = res->start; + s->port.type = PORT_CLPS711X; + s->port.fifosize = 16; + s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; + s->port.uartclk = clk_get_rate(uart_clk); + s->port.ops = &uart_clps711x_ops; + platform_set_drvdata(pdev, s); - s->uart_clk = devm_clk_get(&pdev->dev, "uart"); - if (IS_ERR(s->uart_clk)) { - dev_err(&pdev->dev, "Can't get UART clocks\n"); - return PTR_ERR(s->uart_clk); - } + ret = uart_add_one_port(&clps711x_uart, &s->port); + if (ret) + return ret; - s->uart.owner = THIS_MODULE; - s->uart.dev_name = "ttyCL"; - s->uart.major = UART_CLPS711X_MAJOR; - s->uart.minor = UART_CLPS711X_MINOR; - s->uart.nr = UART_CLPS711X_NR; -#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE - s->uart.cons = &s->console; - s->uart.cons->device = uart_console_device; - s->uart.cons->write = uart_clps711x_console_write; - s->uart.cons->setup = uart_clps711x_console_setup; - s->uart.cons->flags = CON_PRINTBUFFER; - s->uart.cons->index = -1; - s->uart.cons->data = s; - strcpy(s->uart.cons->name, "ttyCL"); -#endif - ret = uart_register_driver(&s->uart); + /* Disable port */ + if (!uart_console(&s->port)) + regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0); + + s->tx_enabled = 1; + + ret = devm_request_irq(&pdev->dev, s->port.irq, uart_clps711x_int_tx, 0, + dev_name(&pdev->dev), &s->port); if (ret) { - dev_err(&pdev->dev, "Registering UART driver failed\n"); + uart_remove_one_port(&clps711x_uart, &s->port); return ret; } - for (i = 0; i < UART_CLPS711X_NR; i++) { - s->port[i].line = i; - s->port[i].dev = &pdev->dev; - s->port[i].irq = TX_IRQ(&s->port[i]); - s->port[i].iobase = SYSCON(&s->port[i]); - s->port[i].type = PORT_CLPS711X; - s->port[i].fifosize = 16; - s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; - s->port[i].uartclk = clk_get_rate(s->uart_clk); - s->port[i].ops = &uart_clps711x_ops; - WARN_ON(uart_add_one_port(&s->uart, &s->port[i])); - } + ret = devm_request_irq(&pdev->dev, s->rx_irq, uart_clps711x_int_rx, 0, + dev_name(&pdev->dev), &s->port); + if (ret) + uart_remove_one_port(&clps711x_uart, &s->port); - return 0; + return ret; } static int uart_clps711x_remove(struct platform_device *pdev) { struct clps711x_port *s = platform_get_drvdata(pdev); - int i; - for (i = 0; i < UART_CLPS711X_NR; i++) - uart_remove_one_port(&s->uart, &s->port[i]); - - uart_unregister_driver(&s->uart); - - return 0; + return uart_remove_one_port(&clps711x_uart, &s->port); } -static struct platform_driver clps711x_uart_driver = { +static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = { + { .compatible = "cirrus,clps711x-uart", }, + { } +}; +MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids); + +static struct platform_driver clps711x_uart_platform = { .driver = { - .name = UART_CLPS711X_NAME, - .owner = THIS_MODULE, + .name = "clps711x-uart", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(clps711x_uart_dt_ids), }, .probe = uart_clps711x_probe, .remove = uart_clps711x_remove, }; -module_platform_driver(clps711x_uart_driver); - -static struct platform_device clps711x_uart_device = { - .name = UART_CLPS711X_NAME, -}; static int __init uart_clps711x_init(void) { - return platform_device_register(&clps711x_uart_device); + int ret; + +#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE + clps711x_uart.cons = &clps711x_console; + clps711x_console.data = &clps711x_uart; +#endif + + ret = uart_register_driver(&clps711x_uart); + if (ret) + return ret; + + return platform_driver_register(&clps711x_uart_platform); } module_init(uart_clps711x_init); static void __exit uart_clps711x_exit(void) { - platform_device_unregister(&clps711x_uart_device); + platform_driver_unregister(&clps711x_uart_platform); + uart_unregister_driver(&clps711x_uart); } module_exit(uart_clps711x_exit); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c index 527a969b0952..6d3b22e93246 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c @@ -29,7 +29,6 @@ #include <linux/tty.h> #include <linux/gfp.h> #include <linux/ioport.h> -#include <linux/init.h> #include <linux/serial.h> #include <linux/console.h> #include <linux/sysrq.h> diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c index a4927e66e741..f46d2ca87209 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c @@ -29,7 +29,6 @@ #include <linux/tty.h> #include <linux/ioport.h> #include <linux/slab.h> -#include <linux/init.h> #include <linux/serial.h> #include <linux/console.h> #include <linux/sysrq.h> diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 477f22f773fc..690bdea0a0c1 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -2153,7 +2153,7 @@ static void flush_timeout_function(unsigned long data) fast_timers[info->line].function = NULL; serial_fast_timer_expired++; - TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line)); + TIMERD(DEBUG_LOG(info->line, "flush_timeout %i ", info->line)); TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired)); check_flush_timeout(info); } diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index d98e43348970..67423805e6d9 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -455,11 +455,11 @@ static void load_code(struct icom_port *icom_port) for (index = 0; index < fw->size; index++) new_page[index] = fw->data[index]; - release_firmware(fw); - writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); writel(temp_pci, &icom_port->dram->mac_load_addr); + release_firmware(fw); + /*Setting the syncReg to 0x80 causes adapter to start downloading the personality code into adapter instruction RAM. Once code is loaded, it will begin executing and, based on diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index b2cfdb661947..d799140e53b6 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -806,6 +806,9 @@ static unsigned int imx_get_mctrl(struct uart_port *port) if (readl(sport->port.membase + UCR2) & UCR2_CTS) tmp |= TIOCM_RTS; + if (readl(sport->port.membase + uts_reg(sport)) & UTS_LOOP) + tmp |= TIOCM_LOOP; + return tmp; } @@ -821,6 +824,11 @@ static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) temp |= UCR2_CTS; writel(temp, sport->port.membase + UCR2); + + temp = readl(sport->port.membase + uts_reg(sport)) & ~UTS_LOOP; + if (mctrl & TIOCM_LOOP) + temp |= UTS_LOOP; + writel(temp, sport->port.membase + uts_reg(sport)); } /* diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index 5dafcf1c227b..5f673b7ca50e 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -15,7 +15,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/compiler.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/errno.h> #include <linux/atomic.h> diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index ec06505e3ae6..97888f4900ec 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -421,6 +421,7 @@ struct psc_fifoc { static struct psc_fifoc __iomem *psc_fifoc; static unsigned int psc_fifoc_irq; +static struct clk *psc_fifoc_clk; static void mpc512x_psc_fifo_init(struct uart_port *port) { @@ -568,36 +569,73 @@ static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port, /* Init PSC FIFO Controller */ static int __init mpc512x_psc_fifoc_init(void) { + int err; struct device_node *np; + struct clk *clk; + + /* default error code, potentially overwritten by clock calls */ + err = -ENODEV; np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-psc-fifo"); if (!np) { pr_err("%s: Can't find FIFOC node\n", __func__); - return -ENODEV; + goto out_err; } + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) { + /* backwards compat with device trees that lack clock specs */ + clk = clk_get_sys(np->name, "ipg"); + } + if (IS_ERR(clk)) { + pr_err("%s: Can't lookup FIFO clock\n", __func__); + err = PTR_ERR(clk); + goto out_ofnode_put; + } + if (clk_prepare_enable(clk)) { + pr_err("%s: Can't enable FIFO clock\n", __func__); + clk_put(clk); + goto out_ofnode_put; + } + psc_fifoc_clk = clk; + psc_fifoc = of_iomap(np, 0); if (!psc_fifoc) { pr_err("%s: Can't map FIFOC\n", __func__); - of_node_put(np); - return -ENODEV; + goto out_clk_disable; } psc_fifoc_irq = irq_of_parse_and_map(np, 0); - of_node_put(np); if (psc_fifoc_irq == 0) { pr_err("%s: Can't get FIFOC irq\n", __func__); - iounmap(psc_fifoc); - return -ENODEV; + goto out_unmap; } + of_node_put(np); return 0; + +out_unmap: + iounmap(psc_fifoc); +out_clk_disable: + clk_disable_unprepare(psc_fifoc_clk); + clk_put(psc_fifoc_clk); +out_ofnode_put: + of_node_put(np); +out_err: + return err; } static void __exit mpc512x_psc_fifoc_uninit(void) { iounmap(psc_fifoc); + + /* disable the clock, errors are not fatal */ + if (psc_fifoc_clk) { + clk_disable_unprepare(psc_fifoc_clk); + clk_put(psc_fifoc_clk); + psc_fifoc_clk = NULL; + } } /* 512x specific interrupt handler. The caller holds the port lock */ @@ -619,29 +657,55 @@ static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port) } static struct clk *psc_mclk_clk[MPC52xx_PSC_MAXNUM]; +static struct clk *psc_ipg_clk[MPC52xx_PSC_MAXNUM]; /* called from within the .request_port() callback (allocation) */ static int mpc512x_psc_alloc_clock(struct uart_port *port) { int psc_num; - char clk_name[16]; struct clk *clk; int err; psc_num = (port->mapbase & 0xf00) >> 8; - snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num); - clk = devm_clk_get(port->dev, clk_name); + + clk = devm_clk_get(port->dev, "mclk"); if (IS_ERR(clk)) { dev_err(port->dev, "Failed to get MCLK!\n"); - return PTR_ERR(clk); + err = PTR_ERR(clk); + goto out_err; } err = clk_prepare_enable(clk); if (err) { dev_err(port->dev, "Failed to enable MCLK!\n"); - return err; + goto out_err; } psc_mclk_clk[psc_num] = clk; + + clk = devm_clk_get(port->dev, "ipg"); + if (IS_ERR(clk)) { + dev_err(port->dev, "Failed to get IPG clock!\n"); + err = PTR_ERR(clk); + goto out_err; + } + err = clk_prepare_enable(clk); + if (err) { + dev_err(port->dev, "Failed to enable IPG clock!\n"); + goto out_err; + } + psc_ipg_clk[psc_num] = clk; + return 0; + +out_err: + if (psc_mclk_clk[psc_num]) { + clk_disable_unprepare(psc_mclk_clk[psc_num]); + psc_mclk_clk[psc_num] = NULL; + } + if (psc_ipg_clk[psc_num]) { + clk_disable_unprepare(psc_ipg_clk[psc_num]); + psc_ipg_clk[psc_num] = NULL; + } + return err; } /* called from within the .release_port() callback (release) */ @@ -656,6 +720,10 @@ static void mpc512x_psc_relse_clock(struct uart_port *port) clk_disable_unprepare(clk); psc_mclk_clk[psc_num] = NULL; } + if (psc_ipg_clk[psc_num]) { + clk_disable_unprepare(psc_ipg_clk[psc_num]); + psc_ipg_clk[psc_num] = NULL; + } } /* implementation of the .clock() callback (enable/disable) */ diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index d8b6fee77a03..aa97fd845b4d 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -734,9 +734,12 @@ static void mxs_auart_reset(struct uart_port *u) static int mxs_auart_startup(struct uart_port *u) { + int ret; struct mxs_auart_port *s = to_auart_port(u); - clk_prepare_enable(s->clk); + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR); @@ -957,7 +960,9 @@ auart_console_setup(struct console *co, char *options) if (!s) return -ENODEV; - clk_prepare_enable(s->clk); + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 2caf9c6f6149..99246606a256 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -9,7 +9,6 @@ * 2 of the License, or (at your option) any later version. * */ -#include <linux/init.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/delay.h> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index fa511ebab67c..77f035158d6c 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -738,9 +738,6 @@ static int serial_omap_startup(struct uart_port *port) return retval; } disable_irq(up->wakeirq); - } else { - dev_info(up->port.dev, "no wakeirq for uart%d\n", - up->port.line); } dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line); @@ -1604,8 +1601,11 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, flags & SER_RS485_RTS_AFTER_SEND); if (ret < 0) return ret; - } else + } else if (up->rts_gpio == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else { up->rts_gpio = -EINVAL; + } if (of_property_read_u32_array(np, "rs485-rts-delay", rs485_delay, 2) == 0) { @@ -1687,6 +1687,9 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.iotype = UPIO_MEM; up->port.irq = uartirq; up->wakeirq = wakeirq; + if (!up->wakeirq) + dev_info(up->port.dev, "no wakeirq for uart%d\n", + up->port.line); up->port.regshift = 2; up->port.fifosize = 64; diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 0aa2b528ef3d..8fa1134e0051 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1508,10 +1508,14 @@ static int pch_uart_verify_port(struct uart_port *port, __func__); return -EOPNOTSUPP; #endif - dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n"); - if (!priv->use_dma) + if (!priv->use_dma) { pch_request_dma(port); - priv->use_dma = 1; + if (priv->chan_rx) + priv->use_dma = 1; + } + dev_info(priv->port.dev, "PCH UART: %s\n", + priv->use_dma ? + "Use DMA Mode" : "No DMA"); } return 0; @@ -1853,7 +1857,6 @@ static void pch_uart_exit_port(struct eg20t_port *priv) debugfs_remove(priv->debugfs); #endif uart_remove_one_port(&pch_uart_driver, &priv->port); - pci_set_drvdata(priv->pdev, NULL); free_page((unsigned long)priv->rxbuf.buf); } @@ -1907,7 +1910,7 @@ static int pch_uart_pci_resume(struct pci_dev *pdev) #define pch_uart_pci_resume NULL #endif -static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { +static const struct pci_device_id pch_uart_pci_id[] = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811), .driver_data = pch_et20t_uart0}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812), diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c index 328d6deb6b08..056f91b3a4ca 100644 --- a/drivers/tty/serial/rp2.c +++ b/drivers/tty/serial/rp2.c @@ -810,7 +810,7 @@ static void rp2_remove(struct pci_dev *pdev) rp2_remove_ports(card); } -static DEFINE_PCI_DEVICE_TABLE(rp2_pci_tbl) = { +static const struct pci_device_id rp2_pci_tbl[] = { /* RocketPort INFINITY cards */ diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index c1af04d46682..9cd706df3b33 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1209,7 +1209,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, /* reset the fifos (and setup the uart) */ s3c24xx_serial_resetport(port, cfg); - clk_disable_unprepare(ourport->clk); return 0; } @@ -1287,6 +1286,13 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); platform_set_drvdata(pdev, &ourport->port); + /* + * Deactivate the clock enabled in s3c24xx_serial_init_port here, + * so that a potential re-enablement through the pm-callback overlaps + * and keeps the clock enabled in this case. + */ + clk_disable_unprepare(ourport->clk); + #ifdef CONFIG_SAMSUNG_CLOCK ret = device_create_file(&pdev->dev, &dev_attr_clock_source); if (ret < 0) diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c deleted file mode 100644 index 887b4f770749..000000000000 --- a/drivers/tty/serial/sc26xx.c +++ /dev/null @@ -1,749 +0,0 @@ -/* - * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices. - * - * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de) - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/major.h> -#include <linux/circ_buf.h> -#include <linux/serial.h> -#include <linux/sysrq.h> -#include <linux/console.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/io.h> - -#warning "Please try migrate to use new driver SCCNXP and report the status" \ - "in the linux-serial mailing list." - -#if defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include <linux/serial_core.h> - -#define SC26XX_MAJOR 204 -#define SC26XX_MINOR_START 205 -#define SC26XX_NR 2 - -struct uart_sc26xx_port { - struct uart_port port[2]; - u8 dsr_mask[2]; - u8 cts_mask[2]; - u8 dcd_mask[2]; - u8 ri_mask[2]; - u8 dtr_mask[2]; - u8 rts_mask[2]; - u8 imr; -}; - -/* register common to both ports */ -#define RD_ISR 0x14 -#define RD_IPR 0x34 - -#define WR_ACR 0x10 -#define WR_IMR 0x14 -#define WR_OPCR 0x34 -#define WR_OPR_SET 0x38 -#define WR_OPR_CLR 0x3C - -/* access common register */ -#define READ_SC(p, r) readb((p)->membase + RD_##r) -#define WRITE_SC(p, r, v) writeb((v), (p)->membase + WR_##r) - -/* register per port */ -#define RD_PORT_MRx 0x00 -#define RD_PORT_SR 0x04 -#define RD_PORT_RHR 0x0c - -#define WR_PORT_MRx 0x00 -#define WR_PORT_CSR 0x04 -#define WR_PORT_CR 0x08 -#define WR_PORT_THR 0x0c - -/* SR bits */ -#define SR_BREAK (1 << 7) -#define SR_FRAME (1 << 6) -#define SR_PARITY (1 << 5) -#define SR_OVERRUN (1 << 4) -#define SR_TXRDY (1 << 2) -#define SR_RXRDY (1 << 0) - -#define CR_RES_MR (1 << 4) -#define CR_RES_RX (2 << 4) -#define CR_RES_TX (3 << 4) -#define CR_STRT_BRK (6 << 4) -#define CR_STOP_BRK (7 << 4) -#define CR_DIS_TX (1 << 3) -#define CR_ENA_TX (1 << 2) -#define CR_DIS_RX (1 << 1) -#define CR_ENA_RX (1 << 0) - -/* ISR bits */ -#define ISR_RXRDYB (1 << 5) -#define ISR_TXRDYB (1 << 4) -#define ISR_RXRDYA (1 << 1) -#define ISR_TXRDYA (1 << 0) - -/* IMR bits */ -#define IMR_RXRDY (1 << 1) -#define IMR_TXRDY (1 << 0) - -/* access port register */ -static inline u8 read_sc_port(struct uart_port *p, u8 reg) -{ - return readb(p->membase + p->line * 0x20 + reg); -} - -static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val) -{ - writeb(val, p->membase + p->line * 0x20 + reg); -} - -#define READ_SC_PORT(p, r) read_sc_port(p, RD_PORT_##r) -#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v) - -static void sc26xx_enable_irq(struct uart_port *port, int mask) -{ - struct uart_sc26xx_port *up; - int line = port->line; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - - up->imr |= mask << (line * 4); - WRITE_SC(port, IMR, up->imr); -} - -static void sc26xx_disable_irq(struct uart_port *port, int mask) -{ - struct uart_sc26xx_port *up; - int line = port->line; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - - up->imr &= ~(mask << (line * 4)); - WRITE_SC(port, IMR, up->imr); -} - -static bool receive_chars(struct uart_port *port) -{ - struct tty_port *tport = NULL; - int limit = 10000; - unsigned char ch; - char flag; - u8 status; - - /* FIXME what is this trying to achieve? */ - if (port->state != NULL) /* Unopened serial console */ - tport = &port->state->port; - - while (limit-- > 0) { - status = READ_SC_PORT(port, SR); - if (!(status & SR_RXRDY)) - break; - ch = READ_SC_PORT(port, RHR); - - flag = TTY_NORMAL; - port->icount.rx++; - - if (unlikely(status & (SR_BREAK | SR_FRAME | - SR_PARITY | SR_OVERRUN))) { - if (status & SR_BREAK) { - status &= ~(SR_PARITY | SR_FRAME); - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (status & SR_PARITY) - port->icount.parity++; - else if (status & SR_FRAME) - port->icount.frame++; - if (status & SR_OVERRUN) - port->icount.overrun++; - - status &= port->read_status_mask; - if (status & SR_BREAK) - flag = TTY_BREAK; - else if (status & SR_PARITY) - flag = TTY_PARITY; - else if (status & SR_FRAME) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - continue; - - if (status & port->ignore_status_mask) - continue; - - tty_insert_flip_char(tport, ch, flag); - } - return !!tport; -} - -static void transmit_chars(struct uart_port *port) -{ - struct circ_buf *xmit; - - if (!port->state) - return; - - xmit = &port->state->xmit; - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - sc26xx_disable_irq(port, IMR_TXRDY); - return; - } - while (!uart_circ_empty(xmit)) { - if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) - break; - - WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static irqreturn_t sc26xx_interrupt(int irq, void *dev_id) -{ - struct uart_sc26xx_port *up = dev_id; - unsigned long flags; - bool push; - u8 isr; - - spin_lock_irqsave(&up->port[0].lock, flags); - - push = false; - isr = READ_SC(&up->port[0], ISR); - if (isr & ISR_TXRDYA) - transmit_chars(&up->port[0]); - if (isr & ISR_RXRDYA) - push = receive_chars(&up->port[0]); - - spin_unlock(&up->port[0].lock); - - if (push) - tty_flip_buffer_push(&up->port[0].state->port); - - spin_lock(&up->port[1].lock); - - push = false; - if (isr & ISR_TXRDYB) - transmit_chars(&up->port[1]); - if (isr & ISR_RXRDYB) - push = receive_chars(&up->port[1]); - - spin_unlock_irqrestore(&up->port[1].lock, flags); - - if (push) - tty_flip_buffer_push(&up->port[1].state->port); - - return IRQ_HANDLED; -} - -/* port->lock is not held. */ -static unsigned int sc26xx_tx_empty(struct uart_port *port) -{ - return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0; -} - -/* port->lock held by caller. */ -static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_sc26xx_port *up; - int line = port->line; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - - if (up->dtr_mask[line]) { - if (mctrl & TIOCM_DTR) - WRITE_SC(port, OPR_SET, up->dtr_mask[line]); - else - WRITE_SC(port, OPR_CLR, up->dtr_mask[line]); - } - if (up->rts_mask[line]) { - if (mctrl & TIOCM_RTS) - WRITE_SC(port, OPR_SET, up->rts_mask[line]); - else - WRITE_SC(port, OPR_CLR, up->rts_mask[line]); - } -} - -/* port->lock is held by caller and interrupts are disabled. */ -static unsigned int sc26xx_get_mctrl(struct uart_port *port) -{ - struct uart_sc26xx_port *up; - int line = port->line; - unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; - u8 ipr; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - ipr = READ_SC(port, IPR) ^ 0xff; - - if (up->dsr_mask[line]) { - mctrl &= ~TIOCM_DSR; - mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0; - } - if (up->cts_mask[line]) { - mctrl &= ~TIOCM_CTS; - mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0; - } - if (up->dcd_mask[line]) { - mctrl &= ~TIOCM_CAR; - mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0; - } - if (up->ri_mask[line]) { - mctrl &= ~TIOCM_RNG; - mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0; - } - return mctrl; -} - -/* port->lock held by caller. */ -static void sc26xx_stop_tx(struct uart_port *port) -{ - return; -} - -/* port->lock held by caller. */ -static void sc26xx_start_tx(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - while (!uart_circ_empty(xmit)) { - if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) { - sc26xx_enable_irq(port, IMR_TXRDY); - break; - } - WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } -} - -/* port->lock held by caller. */ -static void sc26xx_stop_rx(struct uart_port *port) -{ -} - -/* port->lock held by caller. */ -static void sc26xx_enable_ms(struct uart_port *port) -{ -} - -/* port->lock is not held. */ -static void sc26xx_break_ctl(struct uart_port *port, int break_state) -{ - if (break_state == -1) - WRITE_SC_PORT(port, CR, CR_STRT_BRK); - else - WRITE_SC_PORT(port, CR, CR_STOP_BRK); -} - -/* port->lock is not held. */ -static int sc26xx_startup(struct uart_port *port) -{ - sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY); - WRITE_SC(port, OPCR, 0); - - /* reset tx and rx */ - WRITE_SC_PORT(port, CR, CR_RES_RX); - WRITE_SC_PORT(port, CR, CR_RES_TX); - - /* start rx/tx */ - WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX); - - /* enable irqs */ - sc26xx_enable_irq(port, IMR_RXRDY); - return 0; -} - -/* port->lock is not held. */ -static void sc26xx_shutdown(struct uart_port *port) -{ - /* disable interrupst */ - sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY); - - /* stop tx/rx */ - WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX); -} - -/* port->lock is not held. */ -static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - unsigned int quot = uart_get_divisor(port, baud); - unsigned int iflag, cflag; - unsigned long flags; - u8 mr1, mr2, csr; - - spin_lock_irqsave(&port->lock, flags); - - while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc) - udelay(2); - - WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX); - - iflag = termios->c_iflag; - cflag = termios->c_cflag; - - port->read_status_mask = SR_OVERRUN; - if (iflag & INPCK) - port->read_status_mask |= SR_PARITY | SR_FRAME; - if (iflag & (BRKINT | PARMRK)) - port->read_status_mask |= SR_BREAK; - - port->ignore_status_mask = 0; - if (iflag & IGNBRK) - port->ignore_status_mask |= SR_BREAK; - if ((cflag & CREAD) == 0) - port->ignore_status_mask |= SR_BREAK | SR_FRAME | - SR_PARITY | SR_OVERRUN; - - switch (cflag & CSIZE) { - case CS5: - mr1 = 0x00; - break; - case CS6: - mr1 = 0x01; - break; - case CS7: - mr1 = 0x02; - break; - default: - case CS8: - mr1 = 0x03; - break; - } - mr2 = 0x07; - if (cflag & CSTOPB) - mr2 = 0x0f; - if (cflag & PARENB) { - if (cflag & PARODD) - mr1 |= (1 << 2); - } else - mr1 |= (2 << 3); - - switch (baud) { - case 50: - csr = 0x00; - break; - case 110: - csr = 0x11; - break; - case 134: - csr = 0x22; - break; - case 200: - csr = 0x33; - break; - case 300: - csr = 0x44; - break; - case 600: - csr = 0x55; - break; - case 1200: - csr = 0x66; - break; - case 2400: - csr = 0x88; - break; - case 4800: - csr = 0x99; - break; - default: - case 9600: - csr = 0xbb; - break; - case 19200: - csr = 0xcc; - break; - } - - WRITE_SC_PORT(port, CR, CR_RES_MR); - WRITE_SC_PORT(port, MRx, mr1); - WRITE_SC_PORT(port, MRx, mr2); - - WRITE_SC(port, ACR, 0x80); - WRITE_SC_PORT(port, CSR, csr); - - /* reset tx and rx */ - WRITE_SC_PORT(port, CR, CR_RES_RX); - WRITE_SC_PORT(port, CR, CR_RES_TX); - - WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX); - while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc) - udelay(2); - - /* XXX */ - uart_update_timeout(port, cflag, - (port->uartclk / (16 * quot))); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *sc26xx_type(struct uart_port *port) -{ - return "SC26XX"; -} - -static void sc26xx_release_port(struct uart_port *port) -{ -} - -static int sc26xx_request_port(struct uart_port *port) -{ - return 0; -} - -static void sc26xx_config_port(struct uart_port *port, int flags) -{ -} - -static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static struct uart_ops sc26xx_ops = { - .tx_empty = sc26xx_tx_empty, - .set_mctrl = sc26xx_set_mctrl, - .get_mctrl = sc26xx_get_mctrl, - .stop_tx = sc26xx_stop_tx, - .start_tx = sc26xx_start_tx, - .stop_rx = sc26xx_stop_rx, - .enable_ms = sc26xx_enable_ms, - .break_ctl = sc26xx_break_ctl, - .startup = sc26xx_startup, - .shutdown = sc26xx_shutdown, - .set_termios = sc26xx_set_termios, - .type = sc26xx_type, - .release_port = sc26xx_release_port, - .request_port = sc26xx_request_port, - .config_port = sc26xx_config_port, - .verify_port = sc26xx_verify_port, -}; - -static struct uart_port *sc26xx_port; - -#ifdef CONFIG_SERIAL_SC26XX_CONSOLE -static void sc26xx_console_putchar(struct uart_port *port, char c) -{ - unsigned long flags; - int limit = 1000000; - - spin_lock_irqsave(&port->lock, flags); - - while (limit-- > 0) { - if (READ_SC_PORT(port, SR) & SR_TXRDY) { - WRITE_SC_PORT(port, THR, c); - break; - } - udelay(2); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void sc26xx_console_write(struct console *con, const char *s, unsigned n) -{ - struct uart_port *port = sc26xx_port; - int i; - - for (i = 0; i < n; i++) { - if (*s == '\n') - sc26xx_console_putchar(port, '\r'); - sc26xx_console_putchar(port, *s++); - } -} - -static int __init sc26xx_console_setup(struct console *con, char *options) -{ - struct uart_port *port = sc26xx_port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (port->type != PORT_SC26XX) - return -1; - - printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index); - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, con, baud, parity, bits, flow); -} - -static struct uart_driver sc26xx_reg; -static struct console sc26xx_console = { - .name = "ttySC", - .write = sc26xx_console_write, - .device = uart_console_device, - .setup = sc26xx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sc26xx_reg, -}; -#define SC26XX_CONSOLE &sc26xx_console -#else -#define SC26XX_CONSOLE NULL -#endif - -static struct uart_driver sc26xx_reg = { - .owner = THIS_MODULE, - .driver_name = "SC26xx", - .dev_name = "ttySC", - .major = SC26XX_MAJOR, - .minor = SC26XX_MINOR_START, - .nr = SC26XX_NR, - .cons = SC26XX_CONSOLE, -}; - -static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos) -{ - unsigned int bit = (flags >> bitpos) & 15; - - return bit ? (1 << (bit - 1)) : 0; -} - -static void sc26xx_init_masks(struct uart_sc26xx_port *up, - int line, unsigned int data) -{ - up->dtr_mask[line] = sc26xx_flags2mask(data, 0); - up->rts_mask[line] = sc26xx_flags2mask(data, 4); - up->dsr_mask[line] = sc26xx_flags2mask(data, 8); - up->cts_mask[line] = sc26xx_flags2mask(data, 12); - up->dcd_mask[line] = sc26xx_flags2mask(data, 16); - up->ri_mask[line] = sc26xx_flags2mask(data, 20); -} - -static int sc26xx_probe(struct platform_device *dev) -{ - struct resource *res; - struct uart_sc26xx_port *up; - unsigned int *sc26xx_data = dev_get_platdata(&dev->dev); - int err; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - up = kzalloc(sizeof *up, GFP_KERNEL); - if (unlikely(!up)) - return -ENOMEM; - - up->port[0].line = 0; - up->port[0].ops = &sc26xx_ops; - up->port[0].type = PORT_SC26XX; - up->port[0].uartclk = (29491200 / 16); /* arbitrary */ - - up->port[0].mapbase = res->start; - up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40); - up->port[0].iotype = UPIO_MEM; - up->port[0].irq = platform_get_irq(dev, 0); - - up->port[0].dev = &dev->dev; - - sc26xx_init_masks(up, 0, sc26xx_data[0]); - - sc26xx_port = &up->port[0]; - - up->port[1].line = 1; - up->port[1].ops = &sc26xx_ops; - up->port[1].type = PORT_SC26XX; - up->port[1].uartclk = (29491200 / 16); /* arbitrary */ - - up->port[1].mapbase = up->port[0].mapbase; - up->port[1].membase = up->port[0].membase; - up->port[1].iotype = UPIO_MEM; - up->port[1].irq = up->port[0].irq; - - up->port[1].dev = &dev->dev; - - sc26xx_init_masks(up, 1, sc26xx_data[1]); - - err = uart_register_driver(&sc26xx_reg); - if (err) - goto out_free_port; - - sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor; - - err = uart_add_one_port(&sc26xx_reg, &up->port[0]); - if (err) - goto out_unregister_driver; - - err = uart_add_one_port(&sc26xx_reg, &up->port[1]); - if (err) - goto out_remove_port0; - - err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up); - if (err) - goto out_remove_ports; - - platform_set_drvdata(dev, up); - return 0; - -out_remove_ports: - uart_remove_one_port(&sc26xx_reg, &up->port[1]); -out_remove_port0: - uart_remove_one_port(&sc26xx_reg, &up->port[0]); - -out_unregister_driver: - uart_unregister_driver(&sc26xx_reg); - -out_free_port: - kfree(up); - sc26xx_port = NULL; - return err; -} - - -static int __exit sc26xx_driver_remove(struct platform_device *dev) -{ - struct uart_sc26xx_port *up = platform_get_drvdata(dev); - - free_irq(up->port[0].irq, up); - - uart_remove_one_port(&sc26xx_reg, &up->port[0]); - uart_remove_one_port(&sc26xx_reg, &up->port[1]); - - uart_unregister_driver(&sc26xx_reg); - - kfree(up); - sc26xx_port = NULL; - - return 0; -} - -static struct platform_driver sc26xx_driver = { - .probe = sc26xx_probe, - .remove = sc26xx_driver_remove, - .driver = { - .name = "SC26xx", - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(sc26xx_driver); - -MODULE_AUTHOR("Thomas Bogendörfer"); -MODULE_DESCRIPTION("SC681/SC2692 serial driver"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:SC26xx"); diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index dfe79ccc4fb3..d5c2a287b7e7 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -34,6 +34,7 @@ #include <linux/of_device.h> #include <linux/pagemap.h> #include <linux/platform_device.h> +#include <linux/reset.h> #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> @@ -44,8 +45,6 @@ #include <linux/tty.h> #include <linux/tty_flip.h> -#include <linux/clk/tegra.h> - #define TEGRA_UART_TYPE "TEGRA_UART" #define TX_EMPTY_STATUS (UART_LSR_TEMT | UART_LSR_THRE) #define BYTES_TO_ALIGN(x) ((unsigned long)(x) & 0x3) @@ -103,6 +102,7 @@ struct tegra_uart_port { const struct tegra_uart_chip_data *cdata; struct clk *uart_clk; + struct reset_control *rst; unsigned int current_baud; /* Register shadow */ @@ -120,7 +120,6 @@ struct tegra_uart_port { bool rx_timeout; int rx_in_progress; int symb_bit; - int dma_req_sel; struct dma_chan *rx_dma_chan; struct dma_chan *tx_dma_chan; @@ -832,9 +831,9 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) clk_prepare_enable(tup->uart_clk); /* Reset the UART controller to clear all previous status.*/ - tegra_periph_reset_assert(tup->uart_clk); + reset_control_assert(tup->rst); udelay(10); - tegra_periph_reset_deassert(tup->uart_clk); + reset_control_deassert(tup->rst); tup->rx_in_progress = 0; tup->tx_in_progress = 0; @@ -910,15 +909,14 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup, dma_addr_t dma_phys; int ret; struct dma_slave_config dma_sconfig; - dma_cap_mask_t mask; - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - dma_chan = dma_request_channel(mask, NULL, NULL); - if (!dma_chan) { + dma_chan = dma_request_slave_channel_reason(tup->uport.dev, + dma_to_memory ? "rx" : "tx"); + if (IS_ERR(dma_chan)) { + ret = PTR_ERR(dma_chan); dev_err(tup->uport.dev, - "Dma channel is not available, will try later\n"); - return -EPROBE_DEFER; + "DMA channel alloc failed: %d\n", ret); + return ret; } if (dma_to_memory) { @@ -938,7 +936,6 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup, dma_buf = tup->uport.state->xmit.buf; } - dma_sconfig.slave_id = tup->dma_req_sel; if (dma_to_memory) { dma_sconfig.src_addr = tup->uport.mapbase; dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; @@ -1222,17 +1219,8 @@ static int tegra_uart_parse_dt(struct platform_device *pdev, struct tegra_uart_port *tup) { struct device_node *np = pdev->dev.of_node; - u32 of_dma[2]; int port; - if (of_property_read_u32_array(np, "nvidia,dma-request-selector", - of_dma, 2) >= 0) { - tup->dma_req_sel = of_dma[1]; - } else { - dev_err(&pdev->dev, "missing dma requestor in device tree\n"); - return -EINVAL; - } - port = of_alias_get_id(np, "serial"); if (port < 0) { dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port); @@ -1320,6 +1308,12 @@ static int tegra_uart_probe(struct platform_device *pdev) return PTR_ERR(tup->uart_clk); } + tup->rst = devm_reset_control_get(&pdev->dev, "serial"); + if (IS_ERR(tup->rst)) { + dev_err(&pdev->dev, "Couldn't get the reset\n"); + return PTR_ERR(tup->rst); + } + u->iotype = UPIO_MEM32; u->irq = platform_get_irq(pdev, 0); u->regshift = 2; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 0f02351c9239..ece2049bd270 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1830,9 +1830,13 @@ uart_set_options(struct uart_port *port, struct console *co, /* * Ensure that the serial console lock is initialised * early. + * If this port is a console, then the spinlock is already + * initialised. */ - spin_lock_init(&port->lock); - lockdep_set_class(&port->lock, &port_lock_key); + if (!(uart_console(port) && (port->cons->flags & CON_ENABLED))) { + spin_lock_init(&port->lock); + lockdep_set_class(&port->lock, &port_lock_key); + } memset(&termios, 0, sizeof(struct ktermios)); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 7d8103cd3e2e..be33d2b0613b 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -23,35 +23,35 @@ #undef DEBUG -#include <linux/module.h> +#include <linux/clk.h> +#include <linux/console.h> +#include <linux/ctype.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> #include <linux/errno.h> -#include <linux/sh_dma.h> -#include <linux/timer.h> +#include <linux/init.h> #include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/sysrq.h> #include <linux/ioport.h> +#include <linux/major.h> +#include <linux/module.h> #include <linux/mm.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/console.h> -#include <linux/platform_device.h> -#include <linux/serial_sci.h> #include <linux/notifier.h> +#include <linux/of.h> +#include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/ctype.h> -#include <linux/err.h> -#include <linux/dmaengine.h> -#include <linux/dma-mapping.h> #include <linux/scatterlist.h> +#include <linux/serial.h> +#include <linux/serial_sci.h> +#include <linux/sh_dma.h> #include <linux/slab.h> -#include <linux/gpio.h> +#include <linux/string.h> +#include <linux/sysrq.h> +#include <linux/timer.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> #ifdef CONFIG_SUPERH #include <asm/sh_bios.h> @@ -59,11 +59,32 @@ #include "sh-sci.h" +/* Offsets into the sci_port->irqs array */ +enum { + SCIx_ERI_IRQ, + SCIx_RXI_IRQ, + SCIx_TXI_IRQ, + SCIx_BRI_IRQ, + SCIx_NR_IRQS, + + SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */ +}; + +#define SCIx_IRQ_IS_MUXED(port) \ + ((port)->irqs[SCIx_ERI_IRQ] == \ + (port)->irqs[SCIx_RXI_IRQ]) || \ + ((port)->irqs[SCIx_ERI_IRQ] && \ + ((port)->irqs[SCIx_RXI_IRQ] < 0)) + struct sci_port { struct uart_port port; /* Platform configuration */ struct plat_sci_port *cfg; + int overrun_bit; + unsigned int error_mask; + unsigned int sampling_rate; + /* Break timer */ struct timer_list break_timer; @@ -74,8 +95,8 @@ struct sci_port { /* Function clock */ struct clk *fclk; + int irqs[SCIx_NR_IRQS]; char *irqstr[SCIx_NR_IRQS]; - char *gpiostr[SCIx_NR_FNS]; struct dma_chan *chan_tx; struct dma_chan *chan_rx; @@ -421,9 +442,9 @@ static void sci_port_enable(struct sci_port *sci_port) pm_runtime_get_sync(sci_port->port.dev); - clk_enable(sci_port->iclk); + clk_prepare_enable(sci_port->iclk); sci_port->port.uartclk = clk_get_rate(sci_port->iclk); - clk_enable(sci_port->fclk); + clk_prepare_enable(sci_port->fclk); } static void sci_port_disable(struct sci_port *sci_port) @@ -431,8 +452,16 @@ static void sci_port_disable(struct sci_port *sci_port) if (!sci_port->port.dev) return; - clk_disable(sci_port->fclk); - clk_disable(sci_port->iclk); + /* Cancel the break timer to ensure that the timer handler will not try + * to access the hardware with clocks and power disabled. Reset the + * break flag to make the break debouncing state machine ready for the + * next break. + */ + del_timer_sync(&sci_port->break_timer); + sci_port->break_flag = 0; + + clk_disable_unprepare(sci_port->fclk); + clk_disable_unprepare(sci_port->iclk); pm_runtime_put_sync(sci_port->port.dev); } @@ -557,7 +586,7 @@ static inline int sci_rxd_in(struct uart_port *port) return 1; /* Cast for ARM damage */ - return !!__raw_readb((void __iomem *)s->cfg->port_reg); + return !!__raw_readb((void __iomem *)(uintptr_t)s->cfg->port_reg); } /* ********************************************************************** * @@ -733,8 +762,6 @@ static void sci_break_timer(unsigned long data) { struct sci_port *port = (struct sci_port *)data; - sci_port_enable(port); - if (sci_rxd_in(&port->port) == 0) { port->break_flag = 1; sci_schedule_break_timer(port); @@ -744,8 +771,6 @@ static void sci_break_timer(unsigned long data) sci_schedule_break_timer(port); } else port->break_flag = 0; - - sci_port_disable(port); } static int sci_handle_errors(struct uart_port *port) @@ -755,19 +780,15 @@ static int sci_handle_errors(struct uart_port *port) struct tty_port *tport = &port->state->port; struct sci_port *s = to_sci_port(port); - /* - * Handle overruns, if supported. - */ - if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) { - if (status & (1 << s->cfg->overrun_bit)) { - port->icount.overrun++; + /* Handle overruns */ + if (status & (1 << s->overrun_bit)) { + port->icount.overrun++; - /* overrun error */ - if (tty_insert_flip_char(tport, 0, TTY_OVERRUN)) - copied++; + /* overrun error */ + if (tty_insert_flip_char(tport, 0, TTY_OVERRUN)) + copied++; - dev_notice(port->dev, "overrun error"); - } + dev_notice(port->dev, "overrun error"); } if (status & SCxSR_FER(port)) { @@ -829,7 +850,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port) if (!reg->size) return 0; - if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { + if ((serial_port_in(port, SCLSR) & (1 << s->overrun_bit))) { serial_port_out(port, SCLSR, 0); port->icount.overrun++; @@ -1075,19 +1096,19 @@ static int sci_request_irq(struct sci_port *port) for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { struct sci_irq_desc *desc; - unsigned int irq; + int irq; if (SCIx_IRQ_IS_MUXED(port)) { i = SCIx_MUX_IRQ; irq = up->irq; } else { - irq = port->cfg->irqs[i]; + irq = port->irqs[i]; /* * Certain port types won't support all of the * available interrupt sources. */ - if (unlikely(!irq)) + if (unlikely(irq < 0)) continue; } @@ -1112,7 +1133,7 @@ static int sci_request_irq(struct sci_port *port) out_noirq: while (--i >= 0) - free_irq(port->cfg->irqs[i], port); + free_irq(port->irqs[i], port); out_nomem: while (--j >= 0) @@ -1130,16 +1151,16 @@ static void sci_free_irq(struct sci_port *port) * IRQ first. */ for (i = 0; i < SCIx_NR_IRQS; i++) { - unsigned int irq = port->cfg->irqs[i]; + int irq = port->irqs[i]; /* * Certain port types won't support all of the available * interrupt sources. */ - if (unlikely(!irq)) + if (unlikely(irq < 0)) continue; - free_irq(port->cfg->irqs[i], port); + free_irq(port->irqs[i], port); kfree(port->irqstr[i]); if (SCIx_IRQ_IS_MUXED(port)) { @@ -1149,67 +1170,6 @@ static void sci_free_irq(struct sci_port *port) } } -static const char *sci_gpio_names[SCIx_NR_FNS] = { - "sck", "rxd", "txd", "cts", "rts", -}; - -static const char *sci_gpio_str(unsigned int index) -{ - return sci_gpio_names[index]; -} - -static void sci_init_gpios(struct sci_port *port) -{ - struct uart_port *up = &port->port; - int i; - - if (!port->cfg) - return; - - for (i = 0; i < SCIx_NR_FNS; i++) { - const char *desc; - int ret; - - if (!port->cfg->gpios[i]) - continue; - - desc = sci_gpio_str(i); - - port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s", - dev_name(up->dev), desc); - - /* - * If we've failed the allocation, we can still continue - * on with a NULL string. - */ - if (!port->gpiostr[i]) - dev_notice(up->dev, "%s string allocation failure\n", - desc); - - ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]); - if (unlikely(ret != 0)) { - dev_notice(up->dev, "failed %s gpio request\n", desc); - - /* - * If we can't get the GPIO for whatever reason, - * no point in keeping the verbose string around. - */ - kfree(port->gpiostr[i]); - } - } -} - -static void sci_free_gpios(struct sci_port *port) -{ - int i; - - for (i = 0; i < SCIx_NR_FNS; i++) - if (port->cfg->gpios[i]) { - gpio_free(port->cfg->gpios[i]); - kfree(port->gpiostr[i]); - } -} - static unsigned int sci_tx_empty(struct uart_port *port) { unsigned short status = serial_port_in(port, SCxSR); @@ -1309,7 +1269,7 @@ static int sci_dma_rx_push(struct sci_port *s, size_t count) } if (room < count) - dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", + dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n", count - room); if (!room) return room; @@ -1442,7 +1402,7 @@ static void work_fn_rx(struct work_struct *work) int count; chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); - dev_dbg(port->dev, "Read %u bytes with cookie %d\n", + dev_dbg(port->dev, "Read %zu bytes with cookie %d\n", sh_desc->partial, sh_desc->cookie); spin_lock_irqsave(&port->lock, flags); @@ -1655,7 +1615,7 @@ static void rx_timer_fn(unsigned long arg) if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { scr &= ~0x4000; - enable_irq(s->cfg->irqs[1]); + enable_irq(s->irqs[SCIx_RXI_IRQ]); } serial_port_out(port, SCSCR, scr | SCSCR_RIE); dev_dbg(port->dev, "DMA Rx timed out\n"); @@ -1691,16 +1651,17 @@ static void sci_request_dma(struct uart_port *port) s->chan_tx = chan; sg_init_table(&s->sg_tx, 1); /* UART circular tx buffer is an aligned page. */ - BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); + BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK); sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf), - UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK); + UART_XMIT_SIZE, + (uintptr_t)port->state->xmit.buf & ~PAGE_MASK); nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE); if (!nent) sci_tx_dma_release(s, false); else - dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, - sg_dma_len(&s->sg_tx), - port->state->xmit.buf, sg_dma_address(&s->sg_tx)); + dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__, + sg_dma_len(&s->sg_tx), port->state->xmit.buf, + &sg_dma_address(&s->sg_tx)); s->sg_len_tx = nent; @@ -1740,7 +1701,7 @@ static void sci_request_dma(struct uart_port *port) sg_init_table(sg, 1); sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, - (int)buf[i] & ~PAGE_MASK); + (uintptr_t)buf[i] & ~PAGE_MASK); sg_dma_address(sg) = dma[i]; } @@ -1808,21 +1769,11 @@ static void sci_shutdown(struct uart_port *port) sci_free_irq(s); } -static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, +static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps, unsigned long freq) { - switch (algo_id) { - case SCBRR_ALGO_1: - return ((freq + 16 * bps) / (16 * bps) - 1); - case SCBRR_ALGO_2: - return ((freq + 16 * bps) / (32 * bps) - 1); - case SCBRR_ALGO_3: - return (((freq * 2) + 16 * bps) / (16 * bps) - 1); - case SCBRR_ALGO_4: - return (((freq * 2) + 16 * bps) / (32 * bps) - 1); - case SCBRR_ALGO_5: - return (((freq * 1000 / 32) / bps) - 1); - } + if (s->sampling_rate) + return DIV_ROUND_CLOSEST(freq, s->sampling_rate * bps) - 1; /* Warn, but use a safe default */ WARN_ON(1); @@ -1903,12 +1854,11 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, max_baud); if (likely(baud && port->uartclk)) { - if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) { + if (s->cfg->type == PORT_HSCIF) { sci_baud_calc_hscif(baud, port->uartclk, &t, &srr, &cks); } else { - t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, - port->uartclk); + t = sci_scbrr_calc(s, baud, port->uartclk); for (cks = 0; t >= 256 && cks <= 3; cks++) t >>= 2; } @@ -2115,10 +2065,6 @@ static void sci_config_port(struct uart_port *port, int flags) static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) { - struct sci_port *s = to_sci_port(port); - - if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) - return -EINVAL; if (ser->baud_base < 2400) /* No paper tape reader for Mitch.. */ return -EINVAL; @@ -2151,11 +2097,13 @@ static struct uart_ops sci_uart_ops = { }; static int sci_init_single(struct platform_device *dev, - struct sci_port *sci_port, - unsigned int index, - struct plat_sci_port *p) + struct sci_port *sci_port, unsigned int index, + struct plat_sci_port *p, bool early) { struct uart_port *port = &sci_port->port; + const struct resource *res; + unsigned int sampling_rate; + unsigned int i; int ret; sci_port->cfg = p; @@ -2164,31 +2112,76 @@ static int sci_init_single(struct platform_device *dev, port->iotype = UPIO_MEM; port->line = index; + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (res == NULL) + return -ENOMEM; + + port->mapbase = res->start; + + for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i) + sci_port->irqs[i] = platform_get_irq(dev, i); + + /* The SCI generates several interrupts. They can be muxed together or + * connected to different interrupt lines. In the muxed case only one + * interrupt resource is specified. In the non-muxed case three or four + * interrupt resources are specified, as the BRI interrupt is optional. + */ + if (sci_port->irqs[0] < 0) + return -ENXIO; + + if (sci_port->irqs[1] < 0) { + sci_port->irqs[1] = sci_port->irqs[0]; + sci_port->irqs[2] = sci_port->irqs[0]; + sci_port->irqs[3] = sci_port->irqs[0]; + } + + if (p->regtype == SCIx_PROBE_REGTYPE) { + ret = sci_probe_regmap(p); + if (unlikely(ret)) + return ret; + } + switch (p->type) { case PORT_SCIFB: port->fifosize = 256; + sci_port->overrun_bit = 9; + sampling_rate = 16; break; case PORT_HSCIF: port->fifosize = 128; + sampling_rate = 0; + sci_port->overrun_bit = 0; break; case PORT_SCIFA: port->fifosize = 64; + sci_port->overrun_bit = 9; + sampling_rate = 16; break; case PORT_SCIF: port->fifosize = 16; + if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) { + sci_port->overrun_bit = 9; + sampling_rate = 16; + } else { + sci_port->overrun_bit = 0; + sampling_rate = 32; + } break; default: port->fifosize = 1; + sci_port->overrun_bit = 5; + sampling_rate = 32; break; } - if (p->regtype == SCIx_PROBE_REGTYPE) { - ret = sci_probe_regmap(p); - if (unlikely(ret)) - return ret; - } + /* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't + * match the SoC datasheet, this should be investigated. Let platform + * data override the sampling rate for now. + */ + sci_port->sampling_rate = p->sampling_rate ? p->sampling_rate + : sampling_rate; - if (dev) { + if (!early) { sci_port->iclk = clk_get(&dev->dev, "sci_ick"); if (IS_ERR(sci_port->iclk)) { sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); @@ -2208,8 +2201,6 @@ static int sci_init_single(struct platform_device *dev, port->dev = &dev->dev; - sci_init_gpios(sci_port); - pm_runtime_enable(&dev->dev); } @@ -2220,32 +2211,22 @@ static int sci_init_single(struct platform_device *dev, /* * Establish some sensible defaults for the error detection. */ - if (!p->error_mask) - p->error_mask = (p->type == PORT_SCI) ? + sci_port->error_mask = (p->type == PORT_SCI) ? SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK; /* * Establish sensible defaults for the overrun detection, unless * the part has explicitly disabled support for it. */ - if (p->overrun_bit != SCIx_NOT_SUPPORTED) { - if (p->type == PORT_SCI) - p->overrun_bit = 5; - else if (p->scbrr_algo_id == SCBRR_ALGO_4) - p->overrun_bit = 9; - else - p->overrun_bit = 0; - /* - * Make the error mask inclusive of overrun detection, if - * supported. - */ - p->error_mask |= (1 << p->overrun_bit); - } + /* + * Make the error mask inclusive of overrun detection, if + * supported. + */ + sci_port->error_mask |= 1 << sci_port->overrun_bit; - port->mapbase = p->mapbase; port->type = p->type; - port->flags = p->flags; + port->flags = UPF_FIXED_PORT | p->flags; port->regshift = p->regshift; /* @@ -2255,7 +2236,7 @@ static int sci_init_single(struct platform_device *dev, * * For the muxed case there's nothing more to do. */ - port->irq = p->irqs[SCIx_RXI_IRQ]; + port->irq = sci_port->irqs[SCIx_RXI_IRQ]; port->irqflags = 0; port->serial_in = sci_serial_in; @@ -2270,8 +2251,6 @@ static int sci_init_single(struct platform_device *dev, static void sci_cleanup_single(struct sci_port *port) { - sci_free_gpios(port); - clk_put(port->iclk); clk_put(port->fclk); @@ -2387,7 +2366,7 @@ static int sci_probe_earlyprintk(struct platform_device *pdev) early_serial_console.index = pdev->id; - sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg); + sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true); serial_console_setup(&early_serial_console, early_serial_buf); @@ -2437,6 +2416,83 @@ static int sci_remove(struct platform_device *dev) return 0; } +struct sci_port_info { + unsigned int type; + unsigned int regtype; +}; + +static const struct of_device_id of_sci_match[] = { + { + .compatible = "renesas,scif", + .data = (void *)&(const struct sci_port_info) { + .type = PORT_SCIF, + .regtype = SCIx_SH4_SCIF_REGTYPE, + }, + }, { + .compatible = "renesas,scifa", + .data = (void *)&(const struct sci_port_info) { + .type = PORT_SCIFA, + .regtype = SCIx_SCIFA_REGTYPE, + }, + }, { + .compatible = "renesas,scifb", + .data = (void *)&(const struct sci_port_info) { + .type = PORT_SCIFB, + .regtype = SCIx_SCIFB_REGTYPE, + }, + }, { + .compatible = "renesas,hscif", + .data = (void *)&(const struct sci_port_info) { + .type = PORT_HSCIF, + .regtype = SCIx_HSCIF_REGTYPE, + }, + }, { + /* Terminator */ + }, +}; +MODULE_DEVICE_TABLE(of, of_sci_match); + +static struct plat_sci_port * +sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + const struct sci_port_info *info; + struct plat_sci_port *p; + int id; + + if (!IS_ENABLED(CONFIG_OF) || !np) + return NULL; + + match = of_match_node(of_sci_match, pdev->dev.of_node); + if (!match) + return NULL; + + info = match->data; + + p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL); + if (!p) { + dev_err(&pdev->dev, "failed to allocate DT config data\n"); + return NULL; + } + + /* Get the line number for the aliases node. */ + id = of_alias_get_id(np, "serial"); + if (id < 0) { + dev_err(&pdev->dev, "failed to get alias id (%d)\n", id); + return NULL; + } + + *dev_id = id; + + p->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + p->type = info->type; + p->regtype = info->regtype; + p->scscr = SCSCR_RE | SCSCR_TE; + + return p; +} + static int sci_probe_single(struct platform_device *dev, unsigned int index, struct plat_sci_port *p, @@ -2454,7 +2510,7 @@ static int sci_probe_single(struct platform_device *dev, return -EINVAL; } - ret = sci_init_single(dev, sciport, index, p); + ret = sci_init_single(dev, sciport, index, p, false); if (ret) return ret; @@ -2469,8 +2525,9 @@ static int sci_probe_single(struct platform_device *dev, static int sci_probe(struct platform_device *dev) { - struct plat_sci_port *p = dev_get_platdata(&dev->dev); - struct sci_port *sp = &sci_ports[dev->id]; + struct plat_sci_port *p; + struct sci_port *sp; + unsigned int dev_id; int ret; /* @@ -2481,9 +2538,24 @@ static int sci_probe(struct platform_device *dev) if (is_early_platform_device(dev)) return sci_probe_earlyprintk(dev); + if (dev->dev.of_node) { + p = sci_parse_dt(dev, &dev_id); + if (p == NULL) + return -EINVAL; + } else { + p = dev->dev.platform_data; + if (p == NULL) { + dev_err(&dev->dev, "no platform data supplied\n"); + return -EINVAL; + } + + dev_id = dev->id; + } + + sp = &sci_ports[dev_id]; platform_set_drvdata(dev, sp); - ret = sci_probe_single(dev, dev->id, p, sp); + ret = sci_probe_single(dev, dev_id, p, sp); if (ret) return ret; @@ -2535,6 +2607,7 @@ static struct platform_driver sci_driver = { .name = "sh-sci", .owner = THIS_MODULE, .pm = &sci_dev_pm_ops, + .of_match_table = of_match_ptr(of_sci_match), }, }; diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 5aca7364634c..d5db81a0a430 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -9,7 +9,7 @@ #define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) #define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) -#define SCxSR_ERRORS(port) (to_sci_port(port)->cfg->error_mask) +#define SCxSR_ERRORS(port) (to_sci_port(port)->error_mask) #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index f186a8fb8887..b7bfe24d4ebc 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -524,9 +524,11 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param) struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st; unsigned int count; unsigned long flags; + struct dma_tx_state tx_state; spin_lock_irqsave(&sirfport->rx_lock, flags); - while (sirfport->rx_completed != sirfport->rx_issued) { + while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan, + sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) { sirfsoc_uart_insert_rx_buf_to_tty(sirfport, SIRFSOC_RX_DMA_BUF_SIZE); sirfport->rx_completed++; @@ -540,8 +542,10 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param) wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | SIRFUART_IO_MODE); - sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count); spin_unlock_irqrestore(&sirfport->rx_lock, flags); + spin_lock(&port->lock); + sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count); + spin_unlock(&port->lock); if (sirfport->rx_io_count == 4) { spin_lock_irqsave(&sirfport->rx_lock, flags); sirfport->rx_io_count = 0; @@ -709,8 +713,10 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param) struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; unsigned long flags; + struct dma_tx_state tx_state; spin_lock_irqsave(&sirfport->rx_lock, flags); - while (sirfport->rx_completed != sirfport->rx_issued) { + while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan, + sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) { sirfsoc_uart_insert_rx_buf_to_tty(sirfport, SIRFSOC_RX_DMA_BUF_SIZE); if (rd_regl(port, ureg->sirfsoc_int_en_reg) & @@ -1033,6 +1039,16 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, spin_unlock_irqrestore(&port->lock, flags); } +static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + if (!state) + clk_prepare_enable(sirfport->clk); + else + clk_disable_unprepare(sirfport->clk); +} + static unsigned int sirfsoc_uart_init_tx_dma(struct uart_port *port) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); @@ -1264,6 +1280,7 @@ static struct uart_ops sirfsoc_uart_ops = { .startup = sirfsoc_uart_startup, .shutdown = sirfsoc_uart_shutdown, .set_termios = sirfsoc_uart_set_termios, + .pm = sirfsoc_uart_pm, .type = sirfsoc_uart_type, .release_port = sirfsoc_uart_release_port, .request_port = sirfsoc_uart_request_port, @@ -1486,7 +1503,6 @@ usp_no_flow_control: ret = PTR_ERR(sirfport->clk); goto err; } - clk_prepare_enable(sirfport->clk); port->uartclk = clk_get_rate(sirfport->clk); port->ops = &sirfsoc_uart_ops; @@ -1502,7 +1518,6 @@ usp_no_flow_control: return 0; port_err: - clk_disable_unprepare(sirfport->clk); clk_put(sirfport->clk); err: return ret; @@ -1512,38 +1527,42 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) { struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); struct uart_port *port = &sirfport->port; - clk_disable_unprepare(sirfport->clk); clk_put(sirfport->clk); uart_remove_one_port(&sirfsoc_uart_drv, port); return 0; } +#ifdef CONFIG_PM_SLEEP static int -sirfsoc_uart_suspend(struct platform_device *pdev, pm_message_t state) +sirfsoc_uart_suspend(struct device *pdev) { - struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); + struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev); struct uart_port *port = &sirfport->port; uart_suspend_port(&sirfsoc_uart_drv, port); return 0; } -static int sirfsoc_uart_resume(struct platform_device *pdev) +static int sirfsoc_uart_resume(struct device *pdev) { - struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); + struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev); struct uart_port *port = &sirfport->port; uart_resume_port(&sirfsoc_uart_drv, port); return 0; } +#endif + +static const struct dev_pm_ops sirfsoc_uart_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sirfsoc_uart_suspend, sirfsoc_uart_resume) +}; static struct platform_driver sirfsoc_uart_driver = { .probe = sirfsoc_uart_probe, .remove = sirfsoc_uart_remove, - .suspend = sirfsoc_uart_suspend, - .resume = sirfsoc_uart_resume, .driver = { .name = SIRFUART_PORT_NAME, .owner = THIS_MODULE, .of_match_table = sirfsoc_uart_ids, + .pm = &sirfsoc_uart_pm_ops, }, }; |