aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvc_opal.c8
-rw-r--r--drivers/tty/hvc/hvc_rtas.c12
-rw-r--r--drivers/tty/hvc/hvc_udbg.c9
-rw-r--r--drivers/tty/hvc/hvc_xen.c17
-rw-r--r--drivers/tty/n_gsm.c11
-rw-r--r--drivers/tty/n_tty.c14
-rw-r--r--drivers/tty/serial/8250/8250_core.c18
-rw-r--r--drivers/tty/serial/8250/8250_dw.c4
-rw-r--r--drivers/tty/serial/8250/8250_pci.c3
-rw-r--r--drivers/tty/serial/omap-serial.c11
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c4
-rw-r--r--drivers/tty/tty_io.c25
-rw-r--r--drivers/tty/vt/vt.c2
13 files changed, 75 insertions, 63 deletions
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 6496872e2e47..b01659bd4f7c 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -255,13 +255,7 @@ static int __init hvc_opal_init(void)
/* Register as a vio device to receive callbacks */
return platform_driver_register(&hvc_opal_driver);
}
-module_init(hvc_opal_init);
-
-static void __exit hvc_opal_exit(void)
-{
- platform_driver_unregister(&hvc_opal_driver);
-}
-module_exit(hvc_opal_exit);
+device_initcall(hvc_opal_init);
static void udbg_opal_putc(char c)
{
diff --git a/drivers/tty/hvc/hvc_rtas.c b/drivers/tty/hvc/hvc_rtas.c
index 0069bb86ba49..08c87920b74a 100644
--- a/drivers/tty/hvc/hvc_rtas.c
+++ b/drivers/tty/hvc/hvc_rtas.c
@@ -102,17 +102,7 @@ static int __init hvc_rtas_init(void)
return 0;
}
-module_init(hvc_rtas_init);
-
-/* This will tear down the tty portion of the driver */
-static void __exit hvc_rtas_exit(void)
-{
- /* Really the fun isn't over until the worker thread breaks down and
- * the tty cleans up */
- if (hvc_rtas_dev)
- hvc_remove(hvc_rtas_dev);
-}
-module_exit(hvc_rtas_exit);
+device_initcall(hvc_rtas_init);
/* This will happen prior to module init. There is no tty at this time? */
static int __init hvc_rtas_console_init(void)
diff --git a/drivers/tty/hvc/hvc_udbg.c b/drivers/tty/hvc/hvc_udbg.c
index 72228276fe31..9cf573d06a29 100644
--- a/drivers/tty/hvc/hvc_udbg.c
+++ b/drivers/tty/hvc/hvc_udbg.c
@@ -80,14 +80,7 @@ static int __init hvc_udbg_init(void)
return 0;
}
-module_init(hvc_udbg_init);
-
-static void __exit hvc_udbg_exit(void)
-{
- if (hvc_udbg_dev)
- hvc_remove(hvc_udbg_dev);
-}
-module_exit(hvc_udbg_exit);
+device_initcall(hvc_udbg_init);
static int __init hvc_udbg_console_init(void)
{
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 636c9baad7a5..2dc2831840ca 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -561,18 +561,7 @@ static int __init xen_hvc_init(void)
#endif
return r;
}
-
-static void __exit xen_hvc_fini(void)
-{
- struct xencons_info *entry, *next;
-
- if (list_empty(&xenconsoles))
- return;
-
- list_for_each_entry_safe(entry, next, &xenconsoles, list) {
- xen_console_remove(entry);
- }
-}
+device_initcall(xen_hvc_init);
static int xen_cons_init(void)
{
@@ -598,10 +587,6 @@ static int xen_cons_init(void)
hvc_instantiate(HVC_COOKIE, 0, ops);
return 0;
}
-
-
-module_init(xen_hvc_init);
-module_exit(xen_hvc_fini);
console_initcall(xen_cons_init);
#ifdef CONFIG_EARLY_PRINTK
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index f34461c5f14e..2ebe47b78a3e 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1090,6 +1090,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen)
{
unsigned int addr = 0;
unsigned int modem = 0;
+ unsigned int brk = 0;
struct gsm_dlci *dlci;
int len = clen;
u8 *dp = data;
@@ -1116,6 +1117,16 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen)
if (len == 0)
return;
}
+ len--;
+ if (len > 0) {
+ while (gsm_read_ea(&brk, *dp++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ modem <<= 7;
+ modem |= (brk & 0x7f);
+ }
tty = tty_port_tty_get(&dlci->port);
gsm_process_modem(tty, dlci, modem, clen);
if (tty) {
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index cb8017aa4434..d15624c1b751 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -817,8 +817,7 @@ static void process_echoes(struct tty_struct *tty)
struct n_tty_data *ldata = tty->disc_data;
size_t echoed;
- if ((!L_ECHO(tty) && !L_ECHONL(tty)) ||
- ldata->echo_mark == ldata->echo_tail)
+ if (ldata->echo_mark == ldata->echo_tail)
return;
mutex_lock(&ldata->output_lock);
@@ -1244,7 +1243,8 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c)
if (L_ECHO(tty)) {
echo_char(c, tty);
commit_echoes(tty);
- }
+ } else
+ process_echoes(tty);
isig(signal, tty);
return;
}
@@ -1274,7 +1274,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c)
if (I_IXON(tty)) {
if (c == START_CHAR(tty)) {
start_tty(tty);
- commit_echoes(tty);
+ process_echoes(tty);
return 0;
}
if (c == STOP_CHAR(tty)) {
@@ -1820,8 +1820,10 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
* Fix tty hang when I_IXON(tty) is cleared, but the tty
* been stopped by STOP_CHAR(tty) before it.
*/
- if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped)
+ if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) {
start_tty(tty);
+ process_echoes(tty);
+ }
/* The termios change make the tty ready for I/O */
if (waitqueue_active(&tty->write_wait))
@@ -1896,7 +1898,7 @@ err:
static inline int input_available_p(struct tty_struct *tty, int poll)
{
struct n_tty_data *ldata = tty->disc_data;
- int amt = poll && !TIME_CHAR(tty) ? MIN_CHAR(tty) : 1;
+ int amt = poll && !TIME_CHAR(tty) && MIN_CHAR(tty) ? MIN_CHAR(tty) : 1;
if (ldata->icanon && !L_EXTPROC(tty)) {
if (ldata->canon_head != ldata->read_tail)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 61ecd709a722..69932b7556cf 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2433,6 +2433,24 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
serial_dl_write(up, quot);
/*
+ * XR17V35x UARTs have an extra fractional divisor register (DLD)
+ *
+ * We need to recalculate all of the registers, because DLM and DLL
+ * are already rounded to a whole integer.
+ *
+ * When recalculating we use a 32x clock instead of a 16x clock to
+ * allow 1-bit for rounding in the fractional part.
+ */
+ if (up->port.type == PORT_XR17V35X) {
+ unsigned int baud_x32 = (port->uartclk * 2) / baud;
+ u16 quot = baud_x32 / 32;
+ u8 quot_frac = DIV_ROUND_CLOSEST(baud_x32 % 32, 2);
+
+ serial_dl_write(up, quot);
+ serial_port_out(port, 0x2, quot_frac & 0xf);
+ }
+
+ /*
* LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
* is written without DLAB set, this mode will be disabled.
*/
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index faa64e646100..ed3113576740 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -391,7 +391,7 @@ static int dw8250_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int dw8250_suspend(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
@@ -409,7 +409,7 @@ static int dw8250_resume(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_PM_RUNTIME
static int dw8250_runtime_suspend(struct device *dev)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 50228eed3b6f..0ff3e3624d4c 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -783,7 +783,8 @@ static int pci_netmos_9900_setup(struct serial_private *priv,
{
unsigned int bar;
- if ((priv->dev->subsystem_device & 0xff00) == 0x3000) {
+ if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) &&
+ (priv->dev->subsystem_device & 0xff00) == 0x3000) {
/* netmos apparently orders BARs by datasheet layout, so serial
* ports get BARs 0 and 3 (or 1 and 4 for memmapped)
*/
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index fa511ebab67c..77f035158d6c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -738,9 +738,6 @@ static int serial_omap_startup(struct uart_port *port)
return retval;
}
disable_irq(up->wakeirq);
- } else {
- dev_info(up->port.dev, "no wakeirq for uart%d\n",
- up->port.line);
}
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
@@ -1604,8 +1601,11 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
flags & SER_RS485_RTS_AFTER_SEND);
if (ret < 0)
return ret;
- } else
+ } else if (up->rts_gpio == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else {
up->rts_gpio = -EINVAL;
+ }
if (of_property_read_u32_array(np, "rs485-rts-delay",
rs485_delay, 2) == 0) {
@@ -1687,6 +1687,9 @@ static int serial_omap_probe(struct platform_device *pdev)
up->port.iotype = UPIO_MEM;
up->port.irq = uartirq;
up->wakeirq = wakeirq;
+ if (!up->wakeirq)
+ dev_info(up->port.dev, "no wakeirq for uart%d\n",
+ up->port.line);
up->port.regshift = 2;
up->port.fifosize = 64;
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 49a2ffd101a7..b7bfe24d4ebc 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -542,8 +542,10 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
SIRFUART_IO_MODE);
- sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
spin_unlock_irqrestore(&sirfport->rx_lock, flags);
+ spin_lock(&port->lock);
+ sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
+ spin_unlock(&port->lock);
if (sirfport->rx_io_count == 4) {
spin_lock_irqsave(&sirfport->rx_lock, flags);
sirfport->rx_io_count = 0;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index c74a00ad7add..bd2715a9d8e5 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1267,16 +1267,17 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p)
* @p: output buffer of at least 7 bytes
*
* Generate a name from a driver reference and write it to the output
- * buffer.
+ * buffer. Return the number of bytes written.
*
* Locking: None
*/
-static void tty_line_name(struct tty_driver *driver, int index, char *p)
+static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
{
if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
- strcpy(p, driver->name);
+ return sprintf(p, "%s", driver->name);
else
- sprintf(p, "%s%d", driver->name, index + driver->name_base);
+ return sprintf(p, "%s%d", driver->name,
+ index + driver->name_base);
}
/**
@@ -3545,9 +3546,19 @@ static ssize_t show_cons_active(struct device *dev,
if (i >= ARRAY_SIZE(cs))
break;
}
- while (i--)
- count += sprintf(buf + count, "%s%d%c",
- cs[i]->name, cs[i]->index, i ? ' ':'\n');
+ while (i--) {
+ struct tty_driver *driver;
+ const char *name = cs[i]->name;
+ int index = cs[i]->index;
+
+ driver = cs[i]->device(cs[i], &index);
+ if (driver) {
+ count += tty_line_name(driver, index, buf + count);
+ count += sprintf(buf + count, "%c", i ? ' ':'\n');
+ } else
+ count += sprintf(buf + count, "%s%d%c",
+ name, index, i ? ' ':'\n');
+ }
console_unlock();
return count;
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 61b1137d7e56..23b5d32954bf 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1164,6 +1164,8 @@ static void csi_J(struct vc_data *vc, int vpar)
scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char,
vc->vc_screenbuf_size >> 1);
set_origin(vc);
+ if (CON_IS_VISIBLE(vc))
+ update_screen(vc);
/* fall through */
case 2: /* erase whole display */
count = vc->vc_cols * vc->vc_rows;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.