diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/sh-sci.c | 52 | ||||
| -rw-r--r-- | drivers/tty/serial/sh-sci.h | 3 |
2 files changed, 40 insertions, 15 deletions
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 784dd42002ea..41bf9103ed3f 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -152,6 +152,7 @@ struct sci_port { int rx_trigger; struct timer_list rx_fifo_timer; int rx_fifo_timeout; + u16 hscif_tot; bool has_rtscts; bool autorts; @@ -1107,8 +1108,14 @@ static ssize_t rx_fifo_timeout_show(struct device *dev, { struct uart_port *port = dev_get_drvdata(dev); struct sci_port *sci = to_sci_port(port); + int v; - return sprintf(buf, "%d\n", sci->rx_fifo_timeout); + if (port->type == PORT_HSCIF) + v = sci->hscif_tot >> HSSCR_TOT_SHIFT; + else + v = sci->rx_fifo_timeout; + + return sprintf(buf, "%d\n", v); } static ssize_t rx_fifo_timeout_store(struct device *dev, @@ -1124,11 +1131,19 @@ static ssize_t rx_fifo_timeout_store(struct device *dev, ret = kstrtol(buf, 0, &r); if (ret) return ret; - sci->rx_fifo_timeout = r; - scif_set_rtrg(port, 1); - if (r > 0) - setup_timer(&sci->rx_fifo_timer, rx_fifo_timer_fn, - (unsigned long)sci); + + if (port->type == PORT_HSCIF) { + if (r < 0 || r > 3) + return -EINVAL; + sci->hscif_tot = r << HSSCR_TOT_SHIFT; + } else { + sci->rx_fifo_timeout = r; + scif_set_rtrg(port, 1); + if (r > 0) + setup_timer(&sci->rx_fifo_timer, rx_fifo_timer_fn, + (unsigned long)sci); + } + return count; } @@ -2037,9 +2052,13 @@ static void sci_shutdown(struct uart_port *port) spin_lock_irqsave(&port->lock, flags); sci_stop_rx(port); sci_stop_tx(port); - /* Stop RX and TX, disable related interrupts, keep clock source */ + /* + * Stop RX and TX, disable related interrupts, keep clock source + * and HSCIF TOT bits + */ scr = serial_port_in(port, SCSCR); - serial_port_out(port, SCSCR, scr & (SCSCR_CKE1 | SCSCR_CKE0)); + serial_port_out(port, SCSCR, scr & + (SCSCR_CKE1 | SCSCR_CKE0 | s->hscif_tot)); spin_unlock_irqrestore(&port->lock, flags); #ifdef CONFIG_SERIAL_SH_SCI_DMA @@ -2186,7 +2205,7 @@ static void sci_reset(struct uart_port *port) unsigned int status; struct sci_port *s = to_sci_port(port); - serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ + serial_port_out(port, SCSCR, s->hscif_tot); /* TE=0, RE=0, CKE1=0 */ reg = sci_getreg(port, SCFCR); if (reg->size) @@ -2356,7 +2375,7 @@ done: dev_dbg(port->dev, "SCR 0x%x SMR 0x%x BRR %u CKS 0x%x DL %u SRR %u\n", scr_val, smr_val, brr, sccks, dl, srr); - serial_port_out(port, SCSCR, scr_val); + serial_port_out(port, SCSCR, scr_val | s->hscif_tot); serial_port_out(port, SCSMR, smr_val); serial_port_out(port, SCBRR, brr); if (sci_getreg(port, HSSRR)->size) @@ -2370,7 +2389,7 @@ done: smr_val |= serial_port_in(port, SCSMR) & (SCSMR_CKEDG | SCSMR_SRC_MASK | SCSMR_CKS); dev_dbg(port->dev, "SCR 0x%x SMR 0x%x\n", scr_val, smr_val); - serial_port_out(port, SCSCR, scr_val); + serial_port_out(port, SCSCR, scr_val | s->hscif_tot); serial_port_out(port, SCSMR, smr_val); } @@ -2407,7 +2426,7 @@ done: scr_val |= SCSCR_RE | SCSCR_TE | (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)); dev_dbg(port->dev, "SCSCR 0x%x\n", scr_val); - serial_port_out(port, SCSCR, scr_val); + serial_port_out(port, SCSCR, scr_val | s->hscif_tot); if ((srr + 1 == 5) && (port->type == PORT_SCIFA || port->type == PORT_SCIFB)) { /* @@ -2773,6 +2792,7 @@ static int sci_init_single(struct platform_device *dev, } sci_port->rx_fifo_timeout = 0; + sci_port->hscif_tot = 0; /* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't * match the SoC datasheet, this should be investigated. Let platform @@ -2860,7 +2880,7 @@ static void serial_console_write(struct console *co, const char *s, ctrl_temp = SCSCR_RE | SCSCR_TE | (sci_port->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)) | (ctrl & (SCSCR_CKE1 | SCSCR_CKE0)); - serial_port_out(port, SCSCR, ctrl_temp); + serial_port_out(port, SCSCR, ctrl_temp | sci_port->hscif_tot); uart_console_write(port, s, count, serial_console_putchar); @@ -2988,7 +3008,8 @@ static int sci_remove(struct platform_device *dev) sysfs_remove_file(&dev->dev.kobj, &dev_attr_rx_fifo_trigger.attr); } - if (port->port.type == PORT_SCIFA || port->port.type == PORT_SCIFB) { + if (port->port.type == PORT_SCIFA || port->port.type == PORT_SCIFB || + port->port.type == PORT_HSCIF) { sysfs_remove_file(&dev->dev.kobj, &dev_attr_rx_fifo_timeout.attr); } @@ -3173,7 +3194,8 @@ static int sci_probe(struct platform_device *dev) if (ret) return ret; } - if (sp->port.type == PORT_SCIFA || sp->port.type == PORT_SCIFB) { + if (sp->port.type == PORT_SCIFA || sp->port.type == PORT_SCIFB || + sp->port.type == PORT_HSCIF) { ret = sysfs_create_file(&dev->dev.kobj, &dev_attr_rx_fifo_timeout.attr); if (ret) { diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index 971b2ab088d8..2b708cc0e66c 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -62,6 +62,9 @@ enum { #define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */ #define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */ +/* Serial Control Register, HSCIF-only bits */ +#define HSSCR_TOT_SHIFT 14 + /* SCxSR (Serial Status Register) on SCI */ #define SCI_TDRE BIT(7) /* Transmit Data Register Empty */ #define SCI_RDRF BIT(6) /* Receive Data Register Full */ |