diff options
Diffstat (limited to 'drivers/usb/class/cdc-acm.c')
| -rw-r--r-- | drivers/usb/class/cdc-acm.c | 42 |
1 files changed, 27 insertions, 15 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e934e19f49f5..546a17e8ad5b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -60,6 +60,9 @@ static struct acm *acm_table[ACM_TTY_MINORS]; static DEFINE_MUTEX(acm_table_lock); +static void acm_tty_set_termios(struct tty_struct *tty, + struct ktermios *termios_old); + /* * acm_table accessors */ @@ -145,8 +148,15 @@ static int acm_ctrl_msg(struct acm *acm, int request, int value, /* devices aren't required to support these requests. * the cdc acm descriptor tells whether they do... */ -#define acm_set_control(acm, control) \ - acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, control, NULL, 0) +static inline int acm_set_control(struct acm *acm, int control) +{ + if (acm->quirks & QUIRK_CONTROL_LINE_STATE) + return -EOPNOTSUPP; + + return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, + control, NULL, 0); +} + #define acm_set_line(acm, line) \ acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line)) #define acm_send_break(acm, ms) \ @@ -554,6 +564,8 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) goto error_submit_urb; } + acm_tty_set_termios(tty, NULL); + /* * Unthrottle device in case the TTY was closed while throttled. */ @@ -980,11 +992,12 @@ static void acm_tty_set_termios(struct tty_struct *tty, /* FIXME: Needs to clear unsupported bits in the termios */ acm->clocal = ((termios->c_cflag & CLOCAL) != 0); - if (!newline.dwDTERate) { + if (C_BAUD(tty) == B0) { newline.dwDTERate = acm->line.dwDTERate; newctrl &= ~ACM_CTRL_DTR; - } else + } else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) { newctrl |= ACM_CTRL_DTR; + } if (newctrl != acm->ctrlout) acm_set_control(acm, acm->ctrlout = newctrl); @@ -1144,8 +1157,6 @@ static int acm_probe(struct usb_interface *intf, case USB_CDC_CALL_MANAGEMENT_TYPE: call_management_function = buffer[3]; call_interface_num = buffer[4]; - if ((quirks & NOT_A_MODEM) == 0 && (call_management_function & 3) != 3) - dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n"); break; default: /* there are LOTS more CDC descriptors that @@ -1184,10 +1195,11 @@ next_desc: } else { control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0)); - if (!control_interface || !data_interface) { - dev_dbg(&intf->dev, "no interfaces\n"); - return -ENODEV; - } + } + + if (!control_interface || !data_interface) { + dev_dbg(&intf->dev, "no interfaces\n"); + return -ENODEV; } if (data_interface_num != call_interface_num) @@ -1314,6 +1326,7 @@ made_compressed_probe: tty_port_init(&acm->port); acm->port.ops = &acm_port_ops; init_usb_anchor(&acm->delayed); + acm->quirks = quirks; buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { @@ -1461,6 +1474,7 @@ alloc_fail8: &dev_attr_wCountryCodes); device_remove_file(&acm->control->dev, &dev_attr_iCountryCodeRelDate); + kfree(acm->country_codes); } device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities); alloc_fail7: @@ -1681,6 +1695,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */ + .driver_info = QUIRK_CONTROL_LINE_STATE, }, + { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */ { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, /* Motorola H24 HSPA module: */ @@ -1796,11 +1813,6 @@ static const struct usb_device_id acm_ids[] = { /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ - /* Support Lego NXT using pbLua firmware */ - { USB_DEVICE(0x0694, 0xff00), - .driver_info = NOT_A_MODEM, - }, - /* Support for Droids MuIn LCD */ { USB_DEVICE(0x04d8, 0x000b), .driver_info = NO_DATA_INTERFACE, |