diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 64 |
1 files changed, 39 insertions, 25 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 052d5accfe9b..17202b2ee063 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -727,7 +727,7 @@ static void hub_irq(struct urb *urb) if ((++hub->nerrors < 10) || hub->error) goto resubmit; hub->error = status; - /* FALL THROUGH */ + fallthrough; /* let hub_wq handle things */ case 0: /* we got data: port status changed */ @@ -2705,11 +2705,20 @@ static unsigned hub_is_wusb(struct usb_hub *hub) } +#ifdef CONFIG_USB_FEW_INIT_RETRIES +#define PORT_RESET_TRIES 2 +#define SET_ADDRESS_TRIES 1 +#define GET_DESCRIPTOR_TRIES 1 +#define GET_MAXPACKET0_TRIES 1 +#define PORT_INIT_TRIES 4 + +#else #define PORT_RESET_TRIES 5 #define SET_ADDRESS_TRIES 2 #define GET_DESCRIPTOR_TRIES 2 -#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1)) -#define USE_NEW_SCHEME(i, scheme) ((i) / 2 == (int)(scheme)) +#define GET_MAXPACKET0_TRIES 3 +#define PORT_INIT_TRIES 4 +#endif /* CONFIG_USB_FEW_INIT_RETRIES */ #define HUB_ROOT_RESET_TIME 60 /* times are in msec */ #define HUB_SHORT_RESET_TIME 10 @@ -2717,23 +2726,31 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define HUB_LONG_RESET_TIME 200 #define HUB_RESET_TIMEOUT 800 -/* - * "New scheme" enumeration causes an extra state transition to be - * exposed to an xhci host and causes USB3 devices to receive control - * commands in the default state. This has been seen to cause - * enumeration failures, so disable this enumeration scheme for USB3 - * devices. - */ static bool use_new_scheme(struct usb_device *udev, int retry, struct usb_port *port_dev) { int old_scheme_first_port = - port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME; + (port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME) || + old_scheme_first; + /* + * "New scheme" enumeration causes an extra state transition to be + * exposed to an xhci host and causes USB3 devices to receive control + * commands in the default state. This has been seen to cause + * enumeration failures, so disable this enumeration scheme for USB3 + * devices. + */ if (udev->speed >= USB_SPEED_SUPER) return false; - return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first); + /* + * If use_both_schemes is set, use the first scheme (whichever + * it is) for the larger half of the retries, then use the other + * scheme. Otherwise, use the first scheme for all the retries. + */ + if (use_both_schemes && retry >= (PORT_INIT_TRIES + 1) / 2) + return old_scheme_first_port; /* Second half */ + return !old_scheme_first_port; /* First half or all */ } /* Is a USB 3.0 port in the Inactive or Compliance Mode state? @@ -4545,6 +4562,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, const char *speed; int devnum = udev->devnum; const char *driver_name; + bool do_new_scheme; /* root hub ports have a slightly longer reset period * (from USB 2.0 spec, section 7.1.7.5) @@ -4657,14 +4675,13 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * first 8 bytes of the device descriptor to get the ep0 maxpacket * value. */ - for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { - bool did_new_scheme = false; + do_new_scheme = use_new_scheme(udev, retry_counter, port_dev); - if (use_new_scheme(udev, retry_counter, port_dev)) { + for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { + if (do_new_scheme) { struct usb_device_descriptor *buf; int r = 0; - did_new_scheme = true; retval = hub_enable_device(udev); if (retval < 0) { dev_err(&udev->dev, @@ -4684,7 +4701,8 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * 255 is for WUSB devices, we actually need to use * 512 (WUSB1.0[4.8.1]). */ - for (operations = 0; operations < 3; ++operations) { + for (operations = 0; operations < GET_MAXPACKET0_TRIES; + ++operations) { buf->bMaxPacketSize0 = 0; r = usb_control_msg(udev, usb_rcvaddr0pipe(), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, @@ -4773,11 +4791,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * - read ep0 maxpacket even for high and low speed, */ msleep(10); - /* use_new_scheme() checks the speed which may have - * changed since the initial look so we cache the result - * in did_new_scheme - */ - if (did_new_scheme) + if (do_new_scheme) break; } @@ -5106,7 +5120,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, unit_load = 100; status = 0; - for (i = 0; i < SET_CONFIG_TRIES; i++) { + for (i = 0; i < PORT_INIT_TRIES; i++) { /* reallocate for each attempt, since references * to the previous one can escape in various ways @@ -5239,7 +5253,7 @@ loop: break; /* When halfway through our retry count, power-cycle the port */ - if (i == (SET_CONFIG_TRIES / 2) - 1) { + if (i == (PORT_INIT_TRIES - 1) / 2) { dev_info(&port_dev->dev, "attempt power cycle\n"); usb_hub_set_port_power(hdev, hub, port1, false); msleep(2 * hub_power_on_good_delay(hub)); @@ -5770,7 +5784,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) bos = udev->bos; udev->bos = NULL; - for (i = 0; i < SET_CONFIG_TRIES; ++i) { + for (i = 0; i < PORT_INIT_TRIES; ++i) { /* ep0 maxpacket size may change; let the HCD know about it. * Other endpoints will be handled by re-enumeration. */ |