diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 44 |
1 files changed, 35 insertions, 9 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index aa9968d90a48..fcae521df29b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1376,7 +1376,7 @@ static int hub_configure(struct usb_hub *hub, dev_info(hub_dev, "%d port%s detected\n", maxchild, (maxchild == 1) ? "" : "s"); - hub->ports = kzalloc(maxchild * sizeof(struct usb_port *), GFP_KERNEL); + hub->ports = kcalloc(maxchild, sizeof(struct usb_port *), GFP_KERNEL); if (!hub->ports) { ret = -ENOMEM; goto fail; @@ -2636,7 +2636,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define SET_ADDRESS_TRIES 2 #define GET_DESCRIPTOR_TRIES 2 #define SET_CONFIG_TRIES (2 * (use_both_schemes + 1)) -#define USE_NEW_SCHEME(i) ((i) / 2 == (int)old_scheme_first) +#define USE_NEW_SCHEME(i, scheme) ((i) / 2 == (int)scheme) #define HUB_ROOT_RESET_TIME 60 /* times are in msec */ #define HUB_SHORT_RESET_TIME 10 @@ -2651,12 +2651,16 @@ static unsigned hub_is_wusb(struct usb_hub *hub) * enumeration failures, so disable this enumeration scheme for USB3 * devices. */ -static bool use_new_scheme(struct usb_device *udev, int retry) +static bool use_new_scheme(struct usb_device *udev, int retry, + struct usb_port *port_dev) { + int old_scheme_first_port = + port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME; + if (udev->speed >= USB_SPEED_SUPER) return false; - return USE_NEW_SCHEME(retry); + return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first); } /* Is a USB 3.0 port in the Inactive or Compliance Mode state? @@ -2751,6 +2755,14 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, if (!udev) return 0; + if (hub_is_superspeedplus(hub->hdev)) { + /* extended portstatus Rx and Tx lane count are zero based */ + udev->rx_lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1; + udev->tx_lanes = USB_EXT_PORT_TX_LANES(ext_portstatus) + 1; + } else { + udev->rx_lanes = 1; + udev->tx_lanes = 1; + } if (hub_is_wusb(hub)) udev->speed = USB_SPEED_WIRELESS; else if (hub_is_superspeedplus(hub->hdev) && @@ -2867,7 +2879,11 @@ static int hub_port_reset(struct usb_hub *hub, int port1, done: if (status == 0) { /* TRSTRCY = 10 ms; plus some extra */ - msleep(10 + 40); + if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM) + usleep_range(10000, 12000); + else + msleep(10 + 40); + if (udev) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); @@ -3376,6 +3392,10 @@ static int wait_for_connected(struct usb_device *udev, while (delay_ms < 2000) { if (status || *portstatus & USB_PORT_STAT_CONNECTION) break; + if (!port_is_power_on(hub, *portstatus)) { + status = -ENODEV; + break; + } msleep(20); delay_ms += 20; status = hub_port_status(hub, *port1, portstatus, portchange); @@ -4380,6 +4400,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, { struct usb_device *hdev = hub->hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + struct usb_port *port_dev = hub->ports[port1 - 1]; int retries, operations, retval, i; unsigned delay = HUB_SHORT_RESET_TIME; enum usb_device_speed oldspeed = udev->speed; @@ -4501,7 +4522,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { bool did_new_scheme = false; - if (use_new_scheme(udev, retry_counter)) { + if (use_new_scheme(udev, retry_counter, port_dev)) { struct usb_device_descriptor *buf; int r = 0; @@ -4551,7 +4572,9 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * reset. But only on the first attempt, * lest we get into a time out/reset loop */ - if (r == 0 || (r == -ETIMEDOUT && retries == 0)) + if (r == 0 || (r == -ETIMEDOUT && + retries == 0 && + udev->speed > USB_SPEED_FULL)) break; } udev->descriptor.bMaxPacketSize0 = @@ -4598,9 +4621,12 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, if (udev->speed >= USB_SPEED_SUPER) { devnum = udev->devnum; dev_info(&udev->dev, - "%s SuperSpeed%s USB device number %d using %s\n", + "%s SuperSpeed%s%s USB device number %d using %s\n", (udev->config) ? "reset" : "new", - (udev->speed == USB_SPEED_SUPER_PLUS) ? "Plus" : "", + (udev->speed == USB_SPEED_SUPER_PLUS) ? + "Plus Gen 2" : " Gen 1", + (udev->rx_lanes == 2 && udev->tx_lanes == 2) ? + "x2" : "", devnum, driver_name); } |