diff options
Diffstat (limited to 'drivers/usb/core/message.c')
| -rw-r--r-- | drivers/usb/core/message.c | 44 |
1 files changed, 41 insertions, 3 deletions
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index aed3e07942d4..b548cf1dbc62 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1136,8 +1136,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, * Deallocates hcd/hardware state for the endpoints (nuking all or most * pending urbs) and usbcore state for the interfaces, so that usbcore * must usb_set_configuration() before any interfaces could be used. - * - * Must be called with hcd->bandwidth_mutex held. */ void usb_disable_device(struct usb_device *dev, int skip_ep0) { @@ -1190,7 +1188,9 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) usb_disable_endpoint(dev, i + USB_DIR_IN, false); } /* Remove endpoints from the host controller internal state */ + mutex_lock(hcd->bandwidth_mutex); usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + mutex_unlock(hcd->bandwidth_mutex); /* Second pass: remove endpoint pointers */ } for (i = skip_ep0; i < 16; ++i) { @@ -1308,10 +1308,19 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) * Remove the current alt setting and add the new alt setting. */ mutex_lock(hcd->bandwidth_mutex); + /* Disable LPM, and re-enable it once the new alt setting is installed, + * so that the xHCI driver can recalculate the U1/U2 timeouts. + */ + if (usb_disable_lpm(dev)) { + dev_err(&iface->dev, "%s Failed to disable LPM\n.", __func__); + mutex_unlock(hcd->bandwidth_mutex); + return -ENOMEM; + } ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt); if (ret < 0) { dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n", alternate); + usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); return ret; } @@ -1334,6 +1343,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) } else if (ret < 0) { /* Re-instate the old alt setting */ usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting); + usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); return ret; } @@ -1354,6 +1364,9 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) iface->cur_altsetting = alt; + /* Now that the interface is installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); + /* If the interface only has one altsetting and the device didn't * accept the request, we attempt to carry out the equivalent action * by manually clearing the HALT feature for each endpoint in the @@ -1437,6 +1450,14 @@ int usb_reset_configuration(struct usb_device *dev) config = dev->actconfig; retval = 0; mutex_lock(hcd->bandwidth_mutex); + /* Disable LPM, and re-enable it once the configuration is reset, so + * that the xHCI driver can recalculate the U1/U2 timeouts. + */ + if (usb_disable_lpm(dev)) { + dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__); + mutex_unlock(hcd->bandwidth_mutex); + return -ENOMEM; + } /* Make sure we have enough bandwidth for each alternate setting 0 */ for (i = 0; i < config->desc.bNumInterfaces; i++) { struct usb_interface *intf = config->interface[i]; @@ -1465,6 +1486,7 @@ reset_old_alts: usb_hcd_alloc_bandwidth(dev, NULL, alt, intf->cur_altsetting); } + usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); return retval; } @@ -1502,6 +1524,8 @@ reset_old_alts: create_intf_ep_devs(intf); } } + /* Now that the interfaces are installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); return 0; } EXPORT_SYMBOL_GPL(usb_reset_configuration); @@ -1750,7 +1774,6 @@ free_interfaces: /* if it's already configured, clear out old state first. * getting rid of old interfaces means unbinding their drivers. */ - mutex_lock(hcd->bandwidth_mutex); if (dev->state != USB_STATE_ADDRESS) usb_disable_device(dev, 1); /* Skip ep0 */ @@ -1763,8 +1786,19 @@ free_interfaces: * host controller will not allow submissions to dropped endpoints. If * this call fails, the device state is unchanged. */ + mutex_lock(hcd->bandwidth_mutex); + /* Disable LPM, and re-enable it once the new configuration is + * installed, so that the xHCI driver can recalculate the U1/U2 + * timeouts. + */ + if (usb_disable_lpm(dev)) { + dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__); + mutex_unlock(hcd->bandwidth_mutex); + return -ENOMEM; + } ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL); if (ret < 0) { + usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); usb_autosuspend_device(dev); goto free_interfaces; @@ -1784,6 +1818,7 @@ free_interfaces: if (!cp) { usb_set_device_state(dev, USB_STATE_ADDRESS); usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + usb_enable_lpm(dev); mutex_unlock(hcd->bandwidth_mutex); usb_autosuspend_device(dev); goto free_interfaces; @@ -1838,6 +1873,9 @@ free_interfaces: !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) cp->string = usb_cache_string(dev, cp->desc.iConfiguration); + /* Now that the interfaces are installed, re-enable LPM. */ + usb_unlocked_enable_lpm(dev); + /* Now that all the interfaces are set up, register them * to trigger binding of drivers to interfaces. probe() * routines may install different altsettings and may |