diff options
Diffstat (limited to 'drivers/usb/dwc2/core.h')
-rw-r--r-- | drivers/usb/dwc2/core.h | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index cc9c93affa14..30bab8463c96 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -393,6 +393,20 @@ enum dwc2_ep0_state { * 0 - No * 1 - Yes * @hird_threshold: Value of BESL or HIRD Threshold. + * @ref_clk_per: Indicates in terms of pico seconds the period + * of ref_clk. + * 62500 - 16MHz + * 58823 - 17MHz + * 52083 - 19.2MHz + * 50000 - 20MHz + * 41666 - 24MHz + * 33333 - 30MHz (default) + * 25000 - 40MHz + * @sof_cnt_wkup_alert: Indicates in term of number of SOF's after which + * the controller should generate an interrupt if the + * device had been in L1 state until that period. + * This is used by SW to initiate Remote WakeUp in the + * controller so as to sync to the uF number from the host. * @activate_stm_fs_transceiver: Activate internal transceiver using GGPIO * register. * 0 - Deactivate the transceiver (default) @@ -416,6 +430,9 @@ enum dwc2_ep0_state { * back to DWC2_SPEED_PARAM_HIGH while device is gone. * 0 - No (default) * 1 - Yes + * @service_interval: Enable service interval based scheduling. + * 0 - No + * 1 - Yes * * The following parameters may be specified when starting the module. These * parameters define how the DWC_otg controller should be configured. A @@ -461,6 +478,7 @@ struct dwc2_core_params { bool lpm_clock_gating; bool besl; bool hird_threshold_en; + bool service_interval; u8 hird_threshold; bool activate_stm_fs_transceiver; bool ipg_isoc_en; @@ -468,6 +486,10 @@ struct dwc2_core_params { u32 max_transfer_size; u32 ahbcfg; + /* GREFCLK parameters */ + u32 ref_clk_per; + u16 sof_cnt_wkup_alert; + /* Host parameters */ bool host_dma; bool dma_desc_enable; @@ -605,6 +627,10 @@ struct dwc2_core_params { * FIFO sizing is enabled 16 to 32768 * Actual maximum value is autodetected and also * the default. + * @service_interval_mode: For enabling service interval based scheduling in the + * controller. + * 0 - Disable + * 1 - Enable */ struct dwc2_hw_params { unsigned op_mode:3; @@ -635,6 +661,7 @@ struct dwc2_hw_params { unsigned utmi_phy_data_width:2; unsigned lpm_mode:1; unsigned ipg_isoc_en:1; + unsigned service_interval_mode:1; u32 snpsid; u32 dev_ep_dirs; u32 g_tx_fifo_size[MAX_EPS_CHANNELS]; @@ -1354,6 +1381,7 @@ int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg); int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg); int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg); void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg); +void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg); #else static inline int dwc2_hsotg_remove(struct dwc2_hsotg *dwc2) { return 0; } @@ -1388,6 +1416,7 @@ static inline int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) static inline int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg) { return 0; } static inline void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg) {} #endif #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) |