1 files changed, 197 insertions, 54 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b0f4d52b7f04..25ddc39efad8 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -32,6 +33,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
+#include <linux/acpi.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
@@ -363,6 +365,72 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
 }
 
 /**
+ * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ */
+static void dwc3_phy_setup(struct dwc3 *dwc)
+{
+	u32 reg;
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
+
+	/*
+	 * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
+	 * to '0' during coreConsultant configuration. So default value
+	 * will be '0' when the core is reset. Application needs to set it
+	 * to '1' after the core initialization is completed.
+	 */
+	if (dwc->revision > DWC3_REVISION_194A)
+		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+
+	if (dwc->u2ss_inp3_quirk)
+		reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK;
+
+	if (dwc->req_p1p2p3_quirk)
+		reg |= DWC3_GUSB3PIPECTL_REQP1P2P3;
+
+	if (dwc->del_p1p2p3_quirk)
+		reg |= DWC3_GUSB3PIPECTL_DEP1P2P3_EN;
+
+	if (dwc->del_phy_power_chg_quirk)
+		reg |= DWC3_GUSB3PIPECTL_DEPOCHANGE;
+
+	if (dwc->lfps_filter_quirk)
+		reg |= DWC3_GUSB3PIPECTL_LFPSFILT;
+
+	if (dwc->rx_detect_poll_quirk)
+		reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL;
+
+	if (dwc->tx_de_emphasis_quirk)
+		reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis);
+
+	if (dwc->dis_u3_susphy_quirk)
+		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
+
+	mdelay(100);
+
+	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+
+	/*
+	 * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
+	 * '0' during coreConsultant configuration. So default value will
+	 * be '0' when the core is reset. Application needs to set it to
+	 * '1' after the core initialization is completed.
+	 */
+	if (dwc->revision > DWC3_REVISION_194A)
+		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+
+	if (dwc->dis_u2_susphy_quirk)
+		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+
+	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+	mdelay(100);
+}
+
+/**
  * dwc3_core_init - Low-level initialization of DWC3 Core
  * @dwc: Pointer to our controller context structure
  *
@@ -384,6 +452,12 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	}
 	dwc->revision = reg;
 
+	/*
+	 * Write Linux Version Code to our GUID register so it's easy to figure
+	 * out which kernel version a bug was found.
+	 */
+	dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
+
 	/* Handle USB2.0-only core configuration */
 	if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
 			DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
@@ -414,7 +488,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
-	reg &= ~DWC3_GCTL_DISSCRAMBLE;
 
 	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
 	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
@@ -441,11 +514,34 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	case DWC3_GHWPARAMS1_EN_PWROPT_HIB:
 		/* enable hibernation here */
 		dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4);
+
+		/*
+		 * REVISIT Enabling this bit so that host-mode hibernation
+		 * will work. Device-mode hibernation is not yet implemented.
+		 */
+		reg |= DWC3_GCTL_GBLHIBERNATIONEN;
 		break;
 	default:
 		dev_dbg(dwc->dev, "No power optimization available\n");
 	}
 
+	/* check if current dwc3 is on simulation board */
+	if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
+		dev_dbg(dwc->dev, "it is on FPGA board\n");
+		dwc->is_fpga = true;
+	}
+
+	WARN_ONCE(dwc->disable_scramble_quirk && !dwc->is_fpga,
+			"disable_scramble cannot be used on non-FPGA builds\n");
+
+	if (dwc->disable_scramble_quirk && dwc->is_fpga)
+		reg |= DWC3_GCTL_DISSCRAMBLE;
+	else
+		reg &= ~DWC3_GCTL_DISSCRAMBLE;
+
+	if (dwc->u2exit_lfps_quirk)
+		reg |= DWC3_GCTL_U2EXIT_LFPS;
+
 	/*
 	 * WORKAROUND: DWC3 revisions <1.90a have a bug
 	 * where the device can fail to connect at SuperSpeed
@@ -459,6 +555,8 @@ static int dwc3_core_init(struct dwc3 *dwc)
 
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 
+	dwc3_phy_setup(dwc);
+
 	ret = dwc3_alloc_scratch_buffers(dwc);
 	if (ret)
 		goto err1;
@@ -630,6 +728,9 @@ static int dwc3_probe(struct platform_device *pdev)
 	struct device_node	*node = dev->of_node;
 	struct resource		*res;
 	struct dwc3		*dwc;
+	u8			lpm_nyet_threshold;
+	u8			tx_de_emphasis;
+	u8			hird_threshold;
 
 	int			ret;
 
@@ -685,22 +786,96 @@ static int dwc3_probe(struct platform_device *pdev)
 	 */
 	res->start -= DWC3_GLOBALS_REGS_START;
 
+	/* default to highest possible threshold */
+	lpm_nyet_threshold = 0xff;
+
+	/* default to -3.5dB de-emphasis */
+	tx_de_emphasis = 1;
+
+	/*
+	 * default to assert utmi_sleep_n and use maximum allowed HIRD
+	 * threshold value of 0b1100
+	 */
+	hird_threshold = 12;
+
 	if (node) {
 		dwc->maximum_speed = of_usb_get_maximum_speed(node);
-
-		dwc->needs_fifo_resize = of_property_read_bool(node, "tx-fifo-resize");
+		dwc->has_lpm_erratum = of_property_read_bool(node,
+				"snps,has-lpm-erratum");
+		of_property_read_u8(node, "snps,lpm-nyet-threshold",
+				&lpm_nyet_threshold);
+		dwc->is_utmi_l1_suspend = of_property_read_bool(node,
+				"snps,is-utmi-l1-suspend");
+		of_property_read_u8(node, "snps,hird-threshold",
+				&hird_threshold);
+
+		dwc->needs_fifo_resize = of_property_read_bool(node,
+				"tx-fifo-resize");
 		dwc->dr_mode = of_usb_get_dr_mode(node);
+
+		dwc->disable_scramble_quirk = of_property_read_bool(node,
+				"snps,disable_scramble_quirk");
+		dwc->u2exit_lfps_quirk = of_property_read_bool(node,
+				"snps,u2exit_lfps_quirk");
+		dwc->u2ss_inp3_quirk = of_property_read_bool(node,
+				"snps,u2ss_inp3_quirk");
+		dwc->req_p1p2p3_quirk = of_property_read_bool(node,
+				"snps,req_p1p2p3_quirk");
+		dwc->del_p1p2p3_quirk = of_property_read_bool(node,
+				"snps,del_p1p2p3_quirk");
+		dwc->del_phy_power_chg_quirk = of_property_read_bool(node,
+				"snps,del_phy_power_chg_quirk");
+		dwc->lfps_filter_quirk = of_property_read_bool(node,
+				"snps,lfps_filter_quirk");
+		dwc->rx_detect_poll_quirk = of_property_read_bool(node,
+				"snps,rx_detect_poll_quirk");
+		dwc->dis_u3_susphy_quirk = of_property_read_bool(node,
+				"snps,dis_u3_susphy_quirk");
+		dwc->dis_u2_susphy_quirk = of_property_read_bool(node,
+				"snps,dis_u2_susphy_quirk");
+
+		dwc->tx_de_emphasis_quirk = of_property_read_bool(node,
+				"snps,tx_de_emphasis_quirk");
+		of_property_read_u8(node, "snps,tx_de_emphasis",
+				&tx_de_emphasis);
 	} else if (pdata) {
 		dwc->maximum_speed = pdata->maximum_speed;
+		dwc->has_lpm_erratum = pdata->has_lpm_erratum;
+		if (pdata->lpm_nyet_threshold)
+			lpm_nyet_threshold = pdata->lpm_nyet_threshold;
+		dwc->is_utmi_l1_suspend = pdata->is_utmi_l1_suspend;
+		if (pdata->hird_threshold)
+			hird_threshold = pdata->hird_threshold;
 
 		dwc->needs_fifo_resize = pdata->tx_fifo_resize;
 		dwc->dr_mode = pdata->dr_mode;
+
+		dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;
+		dwc->u2exit_lfps_quirk = pdata->u2exit_lfps_quirk;
+		dwc->u2ss_inp3_quirk = pdata->u2ss_inp3_quirk;
+		dwc->req_p1p2p3_quirk = pdata->req_p1p2p3_quirk;
+		dwc->del_p1p2p3_quirk = pdata->del_p1p2p3_quirk;
+		dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk;
+		dwc->lfps_filter_quirk = pdata->lfps_filter_quirk;
+		dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk;
+		dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk;
+		dwc->dis_u2_susphy_quirk = pdata->dis_u2_susphy_quirk;
+
+		dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
+		if (pdata->tx_de_emphasis)
+			tx_de_emphasis = pdata->tx_de_emphasis;
 	}
 
 	/* default to superspeed if no maximum_speed passed */
 	if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
 		dwc->maximum_speed = USB_SPEED_SUPER;
 
+	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
+	dwc->tx_de_emphasis = tx_de_emphasis;
+
+	dwc->hird_threshold = hird_threshold
+		| (dwc->is_utmi_l1_suspend << 4);
+
 	ret = dwc3_core_get_phy(dwc);
 	if (ret)
 		return ret;
@@ -708,9 +883,11 @@ static int dwc3_probe(struct platform_device *pdev)
 	spin_lock_init(&dwc->lock);
 	platform_set_drvdata(pdev, dwc);
 
-	dev->dma_mask	= dev->parent->dma_mask;
-	dev->dma_parms	= dev->parent->dma_parms;
-	dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask);
+	if (!dev->dma_mask) {
+		dev->dma_mask = dev->parent->dma_mask;
+		dev->dma_parms = dev->parent->dma_parms;
+		dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask);
+	}
 
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
@@ -815,50 +992,6 @@ static int dwc3_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int dwc3_prepare(struct device *dev)
-{
-	struct dwc3	*dwc = dev_get_drvdata(dev);
-	unsigned long	flags;
-
-	spin_lock_irqsave(&dwc->lock, flags);
-
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
-		dwc3_gadget_prepare(dwc);
-		/* FALLTHROUGH */
-	case USB_DR_MODE_HOST:
-	default:
-		dwc3_event_buffers_cleanup(dwc);
-		break;
-	}
-
-	spin_unlock_irqrestore(&dwc->lock, flags);
-
-	return 0;
-}
-
-static void dwc3_complete(struct device *dev)
-{
-	struct dwc3	*dwc = dev_get_drvdata(dev);
-	unsigned long	flags;
-
-	spin_lock_irqsave(&dwc->lock, flags);
-
-	dwc3_event_buffers_setup(dwc);
-	switch (dwc->dr_mode) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
-		dwc3_gadget_complete(dwc);
-		/* FALLTHROUGH */
-	case USB_DR_MODE_HOST:
-	default:
-		break;
-	}
-
-	spin_unlock_irqrestore(&dwc->lock, flags);
-}
-
 static int dwc3_suspend(struct device *dev)
 {
 	struct dwc3	*dwc = dev_get_drvdata(dev);
@@ -873,7 +1006,7 @@ static int dwc3_suspend(struct device *dev)
 		/* FALLTHROUGH */
 	case USB_DR_MODE_HOST:
 	default:
-		/* do nothing */
+		dwc3_event_buffers_cleanup(dwc);
 		break;
 	}
 
@@ -906,6 +1039,7 @@ static int dwc3_resume(struct device *dev)
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
+	dwc3_event_buffers_setup(dwc);
 	dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
 
 	switch (dwc->dr_mode) {
@@ -934,9 +1068,6 @@ err_usb2phy_init:
 }
 
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
-	.prepare	= dwc3_prepare,
-	.complete	= dwc3_complete,
-
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
 };
 
@@ -958,12 +1089,24 @@ static const struct of_device_id of_dwc3_match[] = {
 MODULE_DEVICE_TABLE(of, of_dwc3_match);
 #endif
 
+#ifdef CONFIG_ACPI
+
+#define ACPI_ID_INTEL_BSW	"808622B7"
+
+static const struct acpi_device_id dwc3_acpi_match[] = {
+	{ ACPI_ID_INTEL_BSW, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match);
+#endif
+
 static struct platform_driver dwc3_driver = {
 	.probe		= dwc3_probe,
 	.remove		= dwc3_remove,
 	.driver		= {
 		.name	= "dwc3",
 		.of_match_table	= of_match_ptr(of_dwc3_match),
+		.acpi_match_table = ACPI_PTR(dwc3_acpi_match),
 		.pm	= DWC3_PM_OPS,
 	},
 };