diff options
Diffstat (limited to 'drivers/usb/gadget/composite.c')
| -rw-r--r-- | drivers/usb/gadget/composite.c | 363 |
1 files changed, 339 insertions, 24 deletions
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 5cbb1a41c223..5ef87794fd32 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -27,7 +27,7 @@ #include <linux/utsname.h> #include <linux/usb/composite.h> - +#include <asm/unaligned.h> /* * The code in this file is utility code, used to build a gadget driver @@ -74,6 +74,130 @@ MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); static char composite_manufacturer[50]; /*-------------------------------------------------------------------------*/ +/** + * next_ep_desc() - advance to the next EP descriptor + * @t: currect pointer within descriptor array + * + * Return: next EP descriptor or NULL + * + * Iterate over @t until either EP descriptor found or + * NULL (that indicates end of list) encountered + */ +static struct usb_descriptor_header** +next_ep_desc(struct usb_descriptor_header **t) +{ + for (; *t; t++) { + if ((*t)->bDescriptorType == USB_DT_ENDPOINT) + return t; + } + return NULL; +} + +/* + * for_each_ep_desc()- iterate over endpoint descriptors in the + * descriptors list + * @start: pointer within descriptor array. + * @ep_desc: endpoint descriptor to use as the loop cursor + */ +#define for_each_ep_desc(start, ep_desc) \ + for (ep_desc = next_ep_desc(start); \ + ep_desc; ep_desc = next_ep_desc(ep_desc+1)) + +/** + * config_ep_by_speed() - configures the given endpoint + * according to gadget speed. + * @g: pointer to the gadget + * @f: usb function + * @_ep: the endpoint to configure + * + * Return: error code, 0 on success + * + * This function chooses the right descriptors for a given + * endpoint according to gadget speed and saves it in the + * endpoint desc field. If the endpoint already has a descriptor + * assigned to it - overwrites it with currently corresponding + * descriptor. The endpoint maxpacket field is updated according + * to the chosen descriptor. + * Note: the supplied function should hold all the descriptors + * for supported speeds + */ +int config_ep_by_speed(struct usb_gadget *g, + struct usb_function *f, + struct usb_ep *_ep) +{ + struct usb_endpoint_descriptor *chosen_desc = NULL; + struct usb_descriptor_header **speed_desc = NULL; + + struct usb_ss_ep_comp_descriptor *comp_desc = NULL; + int want_comp_desc = 0; + + struct usb_descriptor_header **d_spd; /* cursor for speed desc */ + + if (!g || !f || !_ep) + return -EIO; + + /* select desired speed */ + switch (g->speed) { + case USB_SPEED_SUPER: + if (gadget_is_superspeed(g)) { + speed_desc = f->ss_descriptors; + want_comp_desc = 1; + break; + } + /* else: Fall trough */ + case USB_SPEED_HIGH: + if (gadget_is_dualspeed(g)) { + speed_desc = f->hs_descriptors; + break; + } + /* else: fall through */ + default: + speed_desc = f->descriptors; + } + /* find descriptors */ + for_each_ep_desc(speed_desc, d_spd) { + chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; + if (chosen_desc->bEndpointAddress == _ep->address) + goto ep_found; + } + return -EIO; + +ep_found: + /* commit results */ + _ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize); + _ep->desc = chosen_desc; + _ep->comp_desc = NULL; + _ep->maxburst = 0; + _ep->mult = 0; + if (!want_comp_desc) + return 0; + + /* + * Companion descriptor should follow EP descriptor + * USB 3.0 spec, #9.6.7 + */ + comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd); + if (!comp_desc || + (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP)) + return -EIO; + _ep->comp_desc = comp_desc; + if (g->speed == USB_SPEED_SUPER) { + switch (usb_endpoint_type(_ep->desc)) { + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + _ep->maxburst = comp_desc->bMaxBurst; + break; + case USB_ENDPOINT_XFER_ISOC: + /* mult: bits 1:0 of bmAttributes */ + _ep->mult = comp_desc->bmAttributes & 0x3; + break; + default: + /* Do nothing for control endpoints */ + break; + } + } + return 0; +} /** * usb_add_function() - add a function to a configuration @@ -123,6 +247,8 @@ int usb_add_function(struct usb_configuration *config, config->fullspeed = true; if (!config->highspeed && function->hs_descriptors) config->highspeed = true; + if (!config->superspeed && function->ss_descriptors) + config->superspeed = true; done: if (value) @@ -266,10 +392,17 @@ static int config_buf(struct usb_configuration *config, list_for_each_entry(f, &config->functions, list) { struct usb_descriptor_header **descriptors; - if (speed == USB_SPEED_HIGH) + switch (speed) { + case USB_SPEED_SUPER: + descriptors = f->ss_descriptors; + break; + case USB_SPEED_HIGH: descriptors = f->hs_descriptors; - else + break; + default: descriptors = f->descriptors; + } + if (!descriptors) continue; status = usb_descriptor_fillbuf(next, len, @@ -292,9 +425,10 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value) u8 type = w_value >> 8; enum usb_device_speed speed = USB_SPEED_UNKNOWN; - if (gadget_is_dualspeed(gadget)) { - int hs = 0; - + if (gadget->speed == USB_SPEED_SUPER) + speed = gadget->speed; + else if (gadget_is_dualspeed(gadget)) { + int hs = 0; if (gadget->speed == USB_SPEED_HIGH) hs = 1; if (type == USB_DT_OTHER_SPEED_CONFIG) @@ -308,13 +442,20 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value) w_value &= 0xff; list_for_each_entry(c, &cdev->configs, list) { /* ignore configs that won't work at this speed */ - if (speed == USB_SPEED_HIGH) { + switch (speed) { + case USB_SPEED_SUPER: + if (!c->superspeed) + continue; + break; + case USB_SPEED_HIGH: if (!c->highspeed) continue; - } else { + break; + default: if (!c->fullspeed) continue; } + if (w_value == 0) return config_buf(c, speed, cdev->req->buf, type); w_value--; @@ -328,16 +469,22 @@ static int count_configs(struct usb_composite_dev *cdev, unsigned type) struct usb_configuration *c; unsigned count = 0; int hs = 0; + int ss = 0; if (gadget_is_dualspeed(gadget)) { if (gadget->speed == USB_SPEED_HIGH) hs = 1; + if (gadget->speed == USB_SPEED_SUPER) + ss = 1; if (type == USB_DT_DEVICE_QUALIFIER) hs = !hs; } list_for_each_entry(c, &cdev->configs, list) { /* ignore configs that won't work at this speed */ - if (hs) { + if (ss) { + if (!c->superspeed) + continue; + } else if (hs) { if (!c->highspeed) continue; } else { @@ -349,6 +496,71 @@ static int count_configs(struct usb_composite_dev *cdev, unsigned type) return count; } +/** + * bos_desc() - prepares the BOS descriptor. + * @cdev: pointer to usb_composite device to generate the bos + * descriptor for + * + * This function generates the BOS (Binary Device Object) + * descriptor and its device capabilities descriptors. The BOS + * descriptor should be supported by a SuperSpeed device. + */ +static int bos_desc(struct usb_composite_dev *cdev) +{ + struct usb_ext_cap_descriptor *usb_ext; + struct usb_ss_cap_descriptor *ss_cap; + struct usb_dcd_config_params dcd_config_params; + struct usb_bos_descriptor *bos = cdev->req->buf; + + bos->bLength = USB_DT_BOS_SIZE; + bos->bDescriptorType = USB_DT_BOS; + + bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE); + bos->bNumDeviceCaps = 0; + + /* + * A SuperSpeed device shall include the USB2.0 extension descriptor + * and shall support LPM when operating in USB2.0 HS mode. + */ + usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength); + bos->bNumDeviceCaps++; + le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE); + usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE; + usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY; + usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT; + usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT); + + /* + * The Superspeed USB Capability descriptor shall be implemented by all + * SuperSpeed devices. + */ + ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength); + bos->bNumDeviceCaps++; + le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE); + ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE; + ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY; + ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE; + ss_cap->bmAttributes = 0; /* LTM is not supported yet */ + ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION | + USB_FULL_SPEED_OPERATION | + USB_HIGH_SPEED_OPERATION | + USB_5GBPS_OPERATION); + ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION; + + /* Get Controller configuration */ + if (cdev->gadget->ops->get_config_params) + cdev->gadget->ops->get_config_params(&dcd_config_params); + else { + dcd_config_params.bU1devExitLat = USB_DEFULT_U1_DEV_EXIT_LAT; + dcd_config_params.bU2DevExitLat = + cpu_to_le16(USB_DEFULT_U2_DEV_EXIT_LAT); + } + ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat; + ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat; + + return le16_to_cpu(bos->wTotalLength); +} + static void device_qual(struct usb_composite_dev *cdev) { struct usb_qualifier_descriptor *qual = cdev->req->buf; @@ -361,7 +573,7 @@ static void device_qual(struct usb_composite_dev *cdev) qual->bDeviceSubClass = cdev->desc.bDeviceSubClass; qual->bDeviceProtocol = cdev->desc.bDeviceProtocol; /* ASSUME same EP0 fifo size at both speeds */ - qual->bMaxPacketSize0 = cdev->desc.bMaxPacketSize0; + qual->bMaxPacketSize0 = cdev->gadget->ep0->maxpacket; qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER); qual->bRESERVED = 0; } @@ -392,28 +604,46 @@ static int set_config(struct usb_composite_dev *cdev, unsigned power = gadget_is_otg(gadget) ? 8 : 100; int tmp; - if (cdev->config) - reset_config(cdev); - if (number) { list_for_each_entry(c, &cdev->configs, list) { if (c->bConfigurationValue == number) { + /* + * We disable the FDs of the previous + * configuration only if the new configuration + * is a valid one + */ + if (cdev->config) + reset_config(cdev); result = 0; break; } } if (result < 0) goto done; - } else + } else { /* Zero configuration value - need to reset the config */ + if (cdev->config) + reset_config(cdev); result = 0; + } INFO(cdev, "%s speed config #%d: %s\n", ({ char *speed; switch (gadget->speed) { - case USB_SPEED_LOW: speed = "low"; break; - case USB_SPEED_FULL: speed = "full"; break; - case USB_SPEED_HIGH: speed = "high"; break; - default: speed = "?"; break; + case USB_SPEED_LOW: + speed = "low"; + break; + case USB_SPEED_FULL: + speed = "full"; + break; + case USB_SPEED_HIGH: + speed = "high"; + break; + case USB_SPEED_SUPER: + speed = "super"; + break; + default: + speed = "?"; + break; } ; speed; }), number, c ? c->label : "unconfigured"); if (!c) @@ -435,10 +665,16 @@ static int set_config(struct usb_composite_dev *cdev, * function's setup callback instead of the current * configuration's setup callback. */ - if (gadget->speed == USB_SPEED_HIGH) + switch (gadget->speed) { + case USB_SPEED_SUPER: + descriptors = f->ss_descriptors; + break; + case USB_SPEED_HIGH: descriptors = f->hs_descriptors; - else + break; + default: descriptors = f->descriptors; + } for (; *descriptors; ++descriptors) { struct usb_endpoint_descriptor *ep; @@ -531,8 +767,9 @@ int usb_add_config(struct usb_composite_dev *cdev, } else { unsigned i; - DBG(cdev, "cfg %d/%p speeds:%s%s\n", + DBG(cdev, "cfg %d/%p speeds:%s%s%s\n", config->bConfigurationValue, config, + config->superspeed ? " super" : "", config->highspeed ? " high" : "", config->fullspeed ? (gadget_is_dualspeed(cdev->gadget) @@ -811,6 +1048,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) struct usb_composite_dev *cdev = get_gadget_data(gadget); struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; + int status = 0; u16 w_index = le16_to_cpu(ctrl->wIndex); u8 intf = w_index & 0xFF; u16 w_value = le16_to_cpu(ctrl->wValue); @@ -838,18 +1076,29 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) case USB_DT_DEVICE: cdev->desc.bNumConfigurations = count_configs(cdev, USB_DT_DEVICE); + cdev->desc.bMaxPacketSize0 = + cdev->gadget->ep0->maxpacket; + if (gadget_is_superspeed(gadget)) { + if (gadget->speed >= USB_SPEED_SUPER) + cdev->desc.bcdUSB = cpu_to_le16(0x0300); + else + cdev->desc.bcdUSB = cpu_to_le16(0x0210); + } + value = min(w_length, (u16) sizeof cdev->desc); memcpy(req->buf, &cdev->desc, value); break; case USB_DT_DEVICE_QUALIFIER: - if (!gadget_is_dualspeed(gadget)) + if (!gadget_is_dualspeed(gadget) || + gadget->speed >= USB_SPEED_SUPER) break; device_qual(cdev); value = min_t(int, w_length, sizeof(struct usb_qualifier_descriptor)); break; case USB_DT_OTHER_SPEED_CONFIG: - if (!gadget_is_dualspeed(gadget)) + if (!gadget_is_dualspeed(gadget) || + gadget->speed >= USB_SPEED_SUPER) break; /* FALLTHROUGH */ case USB_DT_CONFIG: @@ -863,6 +1112,12 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) if (value >= 0) value = min(w_length, (u16) value); break; + case USB_DT_BOS: + if (gadget_is_superspeed(gadget)) { + value = bos_desc(cdev); + value = min(w_length, (u16) value); + } + break; } break; @@ -930,6 +1185,61 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) *((u8 *)req->buf) = value; value = min(w_length, (u16) 1); break; + + /* + * USB 3.0 additions: + * Function driver should handle get_status request. If such cb + * wasn't supplied we respond with default value = 0 + * Note: function driver should supply such cb only for the first + * interface of the function + */ + case USB_REQ_GET_STATUS: + if (!gadget_is_superspeed(gadget)) + goto unknown; + if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE)) + goto unknown; + value = 2; /* This is the length of the get_status reply */ + put_unaligned_le16(0, req->buf); + if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) + break; + f = cdev->config->interface[intf]; + if (!f) + break; + status = f->get_status ? f->get_status(f) : 0; + if (status < 0) + break; + put_unaligned_le16(status & 0x0000ffff, req->buf); + break; + /* + * Function drivers should handle SetFeature/ClearFeature + * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied + * only for the first interface of the function + */ + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + if (!gadget_is_superspeed(gadget)) + goto unknown; + if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE)) + goto unknown; + switch (w_value) { + case USB_INTRF_FUNC_SUSPEND: + if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) + break; + f = cdev->config->interface[intf]; + if (!f) + break; + value = 0; + if (f->func_suspend) + value = f->func_suspend(f, w_index >> 8); + if (value < 0) { + ERROR(cdev, + "func_suspend() returned error %d\n", + value); + value = 0; + } + break; + } + break; default: unknown: VDBG(cdev, @@ -1140,7 +1450,6 @@ static int composite_bind(struct usb_gadget *gadget) goto fail; cdev->desc = *composite->dev; - cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket; /* standardized runtime overrides for device ID data */ if (idVendor) @@ -1247,7 +1556,11 @@ composite_resume(struct usb_gadget *gadget) /*-------------------------------------------------------------------------*/ static struct usb_gadget_driver composite_driver = { +#ifdef CONFIG_USB_GADGET_SUPERSPEED + .speed = USB_SPEED_SUPER, +#else .speed = USB_SPEED_HIGH, +#endif .unbind = composite_unbind, @@ -1293,6 +1606,8 @@ int usb_composite_probe(struct usb_composite_driver *driver, driver->iProduct = driver->name; composite_driver.function = (char *) driver->name; composite_driver.driver.name = driver->name; + composite_driver.speed = min((u8)composite_driver.speed, + (u8)driver->max_speed); composite = driver; composite_gadget_bind = bind; |