1 files changed, 43 insertions, 238 deletions

diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 919cdfdda78b..6399c106a3a5 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -20,186 +20,6 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
-#include "gadget_chips.h"
-
-/*
- * This should work with endpoints from controller drivers sharing the
- * same endpoint naming convention.  By example:
- *
- *	- ep1, ep2, ... address is fixed, not direction or type
- *	- ep1in, ep2out, ... address and direction are fixed, not type
- *	- ep1-bulk, ep2-bulk, ... address and type are fixed, not direction
- *	- ep1in-bulk, ep2out-iso, ... all three are fixed
- *	- ep-* ... no functionality restrictions
- *
- * Type suffixes are "-bulk", "-iso", or "-int".  Numbers are decimal.
- * Less common restrictions are implied by gadget_is_*().
- *
- * NOTE:  each endpoint is unidirectional, as specified by its USB
- * descriptor; and isn't specific to a configuration or altsetting.
- */
-static int
-ep_matches (
-	struct usb_gadget		*gadget,
-	struct usb_ep			*ep,
-	struct usb_endpoint_descriptor	*desc,
-	struct usb_ss_ep_comp_descriptor *ep_comp
-)
-{
-	u8		type;
-	const char	*tmp;
-	u16		max;
-
-	int		num_req_streams = 0;
-
-	/* endpoint already claimed? */
-	if (NULL != ep->driver_data)
-		return 0;
-
-	/* only support ep0 for portable CONTROL traffic */
-	type = usb_endpoint_type(desc);
-	if (USB_ENDPOINT_XFER_CONTROL == type)
-		return 0;
-
-	/* some other naming convention */
-	if ('e' != ep->name[0])
-		return 0;
-
-	/* type-restriction:  "-iso", "-bulk", or "-int".
-	 * direction-restriction:  "in", "out".
-	 */
-	if ('-' != ep->name[2]) {
-		tmp = strrchr (ep->name, '-');
-		if (tmp) {
-			switch (type) {
-			case USB_ENDPOINT_XFER_INT:
-				/* bulk endpoints handle interrupt transfers,
-				 * except the toggle-quirky iso-synch kind
-				 */
-				if ('s' == tmp[2])	// == "-iso"
-					return 0;
-				/* for now, avoid PXA "interrupt-in";
-				 * it's documented as never using DATA1.
-				 */
-				if (gadget_is_pxa (gadget)
-						&& 'i' == tmp [1])
-					return 0;
-				break;
-			case USB_ENDPOINT_XFER_BULK:
-				if ('b' != tmp[1])	// != "-bulk"
-					return 0;
-				break;
-			case USB_ENDPOINT_XFER_ISOC:
-				if ('s' != tmp[2])	// != "-iso"
-					return 0;
-			}
-		} else {
-			tmp = ep->name + strlen (ep->name);
-		}
-
-		/* direction-restriction:  "..in-..", "out-.." */
-		tmp--;
-		if (!isdigit (*tmp)) {
-			if (desc->bEndpointAddress & USB_DIR_IN) {
-				if ('n' != *tmp)
-					return 0;
-			} else {
-				if ('t' != *tmp)
-					return 0;
-			}
-		}
-	}
-
-	/*
-	 * Get the number of required streams from the EP companion
-	 * descriptor and see if the EP matches it
-	 */
-	if (usb_endpoint_xfer_bulk(desc)) {
-		if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
-			num_req_streams = ep_comp->bmAttributes & 0x1f;
-			if (num_req_streams > ep->max_streams)
-				return 0;
-		}
-
-	}
-
-	/*
-	 * If the protocol driver hasn't yet decided on wMaxPacketSize
-	 * and wants to know the maximum possible, provide the info.
-	 */
-	if (desc->wMaxPacketSize == 0)
-		desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket_limit);
-
-	/* endpoint maxpacket size is an input parameter, except for bulk
-	 * where it's an output parameter representing the full speed limit.
-	 * the usb spec fixes high speed bulk maxpacket at 512 bytes.
-	 */
-	max = 0x7ff & usb_endpoint_maxp(desc);
-	switch (type) {
-	case USB_ENDPOINT_XFER_INT:
-		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
-		if (!gadget_is_dualspeed(gadget) && max > 64)
-			return 0;
-		/* FALLTHROUGH */
-
-	case USB_ENDPOINT_XFER_ISOC:
-		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
-		if (ep->maxpacket_limit < max)
-			return 0;
-		if (!gadget_is_dualspeed(gadget) && max > 1023)
-			return 0;
-
-		/* BOTH:  "high bandwidth" works only at high speed */
-		if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
-			if (!gadget_is_dualspeed(gadget))
-				return 0;
-			/* configure your hardware with enough buffering!! */
-		}
-		break;
-	}
-
-	/* MATCH!! */
-
-	/* report address */
-	desc->bEndpointAddress &= USB_DIR_IN;
-	if (isdigit (ep->name [2])) {
-		u8	num = simple_strtoul (&ep->name [2], NULL, 10);
-		desc->bEndpointAddress |= num;
-	} else if (desc->bEndpointAddress & USB_DIR_IN) {
-		if (++gadget->in_epnum > 15)
-			return 0;
-		desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum;
-	} else {
-		if (++gadget->out_epnum > 15)
-			return 0;
-		desc->bEndpointAddress |= gadget->out_epnum;
-	}
-
-	/* report (variable) full speed bulk maxpacket */
-	if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) {
-		int size = ep->maxpacket_limit;
-
-		/* min() doesn't work on bitfields with gcc-3.5 */
-		if (size > 64)
-			size = 64;
-		desc->wMaxPacketSize = cpu_to_le16(size);
-	}
-	ep->address = desc->bEndpointAddress;
-	return 1;
-}
-
-static struct usb_ep *
-find_ep (struct usb_gadget *gadget, const char *name)
-{
-	struct usb_ep	*ep;
-
-	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
-		if (0 == strcmp (ep->name, name))
-			return ep;
-	}
-	return NULL;
-}
-
 /**
  * usb_ep_autoconfig_ss() - choose an endpoint matching the ep
  * descriptor and ep companion descriptor
@@ -240,7 +60,7 @@ find_ep (struct usb_gadget *gadget, const char *name)
  * updated with the assigned number of streams if it is
  * different from the original value. To prevent the endpoint
  * from being returned by a later autoconfig call, claim it by
- * assigning ep->driver_data to some non-null value.
+ * assigning ep->claimed to true.
  *
  * On failure, this returns a null endpoint descriptor.
  */
@@ -255,74 +75,58 @@ struct usb_ep *usb_ep_autoconfig_ss(
 
 	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
 
-	/* First, apply chip-specific "best usage" knowledge.
-	 * This might make a good usb_gadget_ops hook ...
-	 */
-	if (gadget_is_net2280(gadget)) {
-		char name[8];
-
-		if (type == USB_ENDPOINT_XFER_INT) {
-			/* ep-e, ep-f are PIO with only 64 byte fifos */
-			ep = find_ep(gadget, "ep-e");
-			if (ep && ep_matches(gadget, ep, desc, ep_comp))
-				goto found_ep;
-			ep = find_ep(gadget, "ep-f");
-			if (ep && ep_matches(gadget, ep, desc, ep_comp))
-				goto found_ep;
-		}
-
-		/* USB3380: use same address for usb and hardware endpoints */
-		snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
-				usb_endpoint_dir_in(desc) ? "in" : "out");
-		ep = find_ep(gadget, name);
-		if (ep && ep_matches(gadget, ep, desc, ep_comp))
+	if (gadget->ops->match_ep) {
+		ep = gadget->ops->match_ep(gadget, desc, ep_comp);
+		if (ep)
 			goto found_ep;
-	} else if (gadget_is_goku (gadget)) {
-		if (USB_ENDPOINT_XFER_INT == type) {
-			/* single buffering is enough */
-			ep = find_ep(gadget, "ep3-bulk");
-			if (ep && ep_matches(gadget, ep, desc, ep_comp))
-				goto found_ep;
-		} else if (USB_ENDPOINT_XFER_BULK == type
-				&& (USB_DIR_IN & desc->bEndpointAddress)) {
-			/* DMA may be available */
-			ep = find_ep(gadget, "ep2-bulk");
-			if (ep && ep_matches(gadget, ep, desc,
-					      ep_comp))
-				goto found_ep;
-		}
-
-#ifdef CONFIG_BLACKFIN
-	} else if (gadget_is_musbhdrc(gadget)) {
-		if ((USB_ENDPOINT_XFER_BULK == type) ||
-		    (USB_ENDPOINT_XFER_ISOC == type)) {
-			if (USB_DIR_IN & desc->bEndpointAddress)
-				ep = find_ep (gadget, "ep5in");
-			else
-				ep = find_ep (gadget, "ep6out");
-		} else if (USB_ENDPOINT_XFER_INT == type) {
-			if (USB_DIR_IN & desc->bEndpointAddress)
-				ep = find_ep(gadget, "ep1in");
-			else
-				ep = find_ep(gadget, "ep2out");
-		} else
-			ep = NULL;
-		if (ep && ep_matches(gadget, ep, desc, ep_comp))
-			goto found_ep;
-#endif
 	}
 
 	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
-		if (ep_matches(gadget, ep, desc, ep_comp))
+		if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
 			goto found_ep;
 	}
 
 	/* Fail */
 	return NULL;
 found_ep:
+
+	/*
+	 * If the protocol driver hasn't yet decided on wMaxPacketSize
+	 * and wants to know the maximum possible, provide the info.
+	 */
+	if (desc->wMaxPacketSize == 0)
+		desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket_limit);
+
+	/* report address */
+	desc->bEndpointAddress &= USB_DIR_IN;
+	if (isdigit(ep->name[2])) {
+		u8 num = simple_strtoul(&ep->name[2], NULL, 10);
+		desc->bEndpointAddress |= num;
+	} else if (desc->bEndpointAddress & USB_DIR_IN) {
+		if (++gadget->in_epnum > 15)
+			return NULL;
+		desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum;
+	} else {
+		if (++gadget->out_epnum > 15)
+			return NULL;
+		desc->bEndpointAddress |= gadget->out_epnum;
+	}
+
+	/* report (variable) full speed bulk maxpacket */
+	if ((type == USB_ENDPOINT_XFER_BULK) && !ep_comp) {
+		int size = ep->maxpacket_limit;
+
+		/* min() doesn't work on bitfields with gcc-3.5 */
+		if (size > 64)
+			size = 64;
+		desc->wMaxPacketSize = cpu_to_le16(size);
+	}
+
+	ep->address = desc->bEndpointAddress;
 	ep->desc = NULL;
 	ep->comp_desc = NULL;
+	ep->claimed = true;
 	return ep;
 }
 EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
@@ -354,7 +158,7 @@ EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
  * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
  * is initialized as if the endpoint were used at full speed.  To prevent
  * the endpoint from being returned by a later autoconfig call, claim it
- * by assigning ep->driver_data to some non-null value.
+ * by assigning ep->claimed to true.
  *
  * On failure, this returns a null endpoint descriptor.
  */
@@ -373,7 +177,7 @@ EXPORT_SYMBOL_GPL(usb_ep_autoconfig);
  *
  * Use this for devices where one configuration may need to assign
  * endpoint resources very differently from the next one.  It clears
- * state such as ep->driver_data and the record of assigned endpoints
+ * state such as ep->claimed and the record of assigned endpoints
  * used by usb_ep_autoconfig().
  */
 void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
@@ -381,6 +185,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 	struct usb_ep	*ep;
 
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+		ep->claimed = false;
 		ep->driver_data = NULL;
 	}
 	gadget->in_epnum = 0;