diff options
Diffstat (limited to 'drivers/usb/gadget/fsl_udc_core.c')
| -rw-r--r-- | drivers/usb/gadget/fsl_udc_core.c | 54 |
1 files changed, 30 insertions, 24 deletions
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index b04712f19f1e..55abfb6bd612 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -43,7 +43,6 @@ #include <asm/byteorder.h> #include <asm/io.h> -#include <asm/system.h> #include <asm/unaligned.h> #include <asm/dma.h> @@ -659,6 +658,7 @@ static int fsl_ep_disable(struct usb_ep *_ep) nuke(ep, -ESHUTDOWN); ep->desc = NULL; + ep->ep.desc = NULL; ep->stopped = 1; spin_unlock_irqrestore(&udc->lock, flags); @@ -730,7 +730,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) : (1 << (ep_index(ep))); /* check if the pipe is empty */ - if (!(list_empty(&ep->queue))) { + if (!(list_empty(&ep->queue)) && !(ep_index(ep) == 0)) { /* Add td to the end */ struct fsl_req *lastreq; lastreq = list_entry(ep->queue.prev, struct fsl_req, queue); @@ -768,7 +768,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) * @is_last: return flag if it is the last dTD of the request * return: pointer to the built dTD */ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length, - dma_addr_t *dma, int *is_last) + dma_addr_t *dma, int *is_last, gfp_t gfp_flags) { u32 swap_temp; struct ep_td_struct *dtd; @@ -777,7 +777,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length, *length = min(req->req.length - req->req.actual, (unsigned)EP_MAX_LENGTH_TRANSFER); - dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma); + dtd = dma_pool_alloc(udc_controller->td_pool, gfp_flags, dma); if (dtd == NULL) return dtd; @@ -827,7 +827,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length, } /* Generate dtd chain for a request */ -static int fsl_req_to_dtd(struct fsl_req *req) +static int fsl_req_to_dtd(struct fsl_req *req, gfp_t gfp_flags) { unsigned count; int is_last; @@ -836,7 +836,7 @@ static int fsl_req_to_dtd(struct fsl_req *req) dma_addr_t dma; do { - dtd = fsl_build_dtd(req, &count, &dma, &is_last); + dtd = fsl_build_dtd(req, &count, &dma, &is_last, gfp_flags); if (dtd == NULL) return -ENOMEM; @@ -910,20 +910,14 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) req->req.actual = 0; req->dtd_count = 0; - spin_lock_irqsave(&udc->lock, flags); - /* build dtds and push them to device queue */ - if (!fsl_req_to_dtd(req)) { + if (!fsl_req_to_dtd(req, gfp_flags)) { + spin_lock_irqsave(&udc->lock, flags); fsl_queue_td(ep, req); } else { - spin_unlock_irqrestore(&udc->lock, flags); return -ENOMEM; } - /* Update ep0 state */ - if ((ep_index(ep) == 0)) - udc->ep0_state = DATA_STATE_XMIT; - /* irq handler advances the queue */ if (req != NULL) list_add_tail(&req->queue, &ep->queue); @@ -1217,7 +1211,7 @@ static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA) udc = container_of(gadget, struct fsl_udc, gadget); if (udc->transceiver) - return otg_set_power(udc->transceiver, mA); + return usb_phy_set_power(udc->transceiver, mA); return -ENOTSUPP; } @@ -1281,7 +1275,8 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction) udc->ep0_dir = USB_DIR_OUT; ep = &udc->eps[0]; - udc->ep0_state = WAIT_FOR_OUT_STATUS; + if (udc->ep0_state != DATA_STATE_XMIT) + udc->ep0_state = WAIT_FOR_OUT_STATUS; req->ep = ep; req->req.length = 0; @@ -1295,7 +1290,7 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction) ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); req->mapped = 1; - if (fsl_req_to_dtd(req) == 0) + if (fsl_req_to_dtd(req, GFP_ATOMIC) == 0) fsl_queue_td(ep, req); else return -ENOMEM; @@ -1379,13 +1374,16 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, req->mapped = 1; /* prime the data phase */ - if ((fsl_req_to_dtd(req) == 0)) + if ((fsl_req_to_dtd(req, GFP_ATOMIC) == 0)) fsl_queue_td(ep, req); else /* no mem */ goto stall; list_add_tail(&req->queue, &ep->queue); udc->ep0_state = DATA_STATE_XMIT; + if (ep0_prime_status(udc, EP_DIR_OUT)) + ep0stall(udc); + return; stall: ep0stall(udc); @@ -1494,6 +1492,14 @@ static void setup_received_irq(struct fsl_udc *udc, spin_lock(&udc->lock); udc->ep0_state = (setup->bRequestType & USB_DIR_IN) ? DATA_STATE_XMIT : DATA_STATE_RECV; + /* + * If the data stage is IN, send status prime immediately. + * See 2.0 Spec chapter 8.5.3.3 for detail. + */ + if (udc->ep0_state == DATA_STATE_XMIT) + if (ep0_prime_status(udc, EP_DIR_OUT)) + ep0stall(udc); + } else { /* No data phase, IN status from gadget */ udc->ep0_dir = USB_DIR_IN; @@ -1522,9 +1528,8 @@ static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0, switch (udc->ep0_state) { case DATA_STATE_XMIT: - /* receive status phase */ - if (ep0_prime_status(udc, EP_DIR_OUT)) - ep0stall(udc); + /* already primed at setup_received_irq */ + udc->ep0_state = WAIT_FOR_OUT_STATUS; break; case DATA_STATE_RECV: /* send status phase */ @@ -1966,7 +1971,8 @@ static int fsl_start(struct usb_gadget_driver *driver, /* connect to bus through transceiver */ if (udc_controller->transceiver) { - retval = otg_set_peripheral(udc_controller->transceiver, + retval = otg_set_peripheral( + udc_controller->transceiver->otg, &udc_controller->gadget); if (retval < 0) { ERR("can't bind to transceiver\n"); @@ -2006,7 +2012,7 @@ static int fsl_stop(struct usb_gadget_driver *driver) return -EINVAL; if (udc_controller->transceiver) - otg_set_peripheral(udc_controller->transceiver, NULL); + otg_set_peripheral(udc_controller->transceiver->otg, NULL); /* stop DR, disable intr */ dr_controller_stop(udc_controller); @@ -2430,7 +2436,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) #ifdef CONFIG_USB_OTG if (pdata->operating_mode == FSL_USB2_DR_OTG) { - udc_controller->transceiver = otg_get_transceiver(); + udc_controller->transceiver = usb_get_transceiver(); if (!udc_controller->transceiver) { ERR("Can't find OTG driver!\n"); ret = -ENODEV; |