diff options
Diffstat (limited to 'drivers/usb/gadget/udc')
-rw-r--r-- | drivers/usb/gadget/udc/core.c | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/dummy_hcd.c | 10 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/pxa27x_udc.c | 19 |
3 files changed, 17 insertions, 14 deletions
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index debf54205d22..5b5cfeb6c14a 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -897,8 +897,6 @@ EXPORT_SYMBOL_GPL(usb_gadget_unmap_request); * @ep: the endpoint to be used with with the request * @req: the request being given back * - * Context: in_interrupt() - * * This is called by device controller drivers in order to return the * completed request back to the gadget layer. */ diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 53a227217f1c..ab5e978b5052 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -553,6 +553,7 @@ static int dummy_enable(struct usb_ep *_ep, /* we'll fake any legal size */ break; /* save a return statement */ + fallthrough; default: goto done; } @@ -595,6 +596,7 @@ static int dummy_enable(struct usb_ep *_ep, if (max <= 1023) break; /* save a return statement */ + fallthrough; default: goto done; } @@ -1754,8 +1756,10 @@ static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb, return ret_val; } -/* drive both sides of the transfers; looks like irq handlers to - * both drivers except the callbacks aren't in_irq(). +/* + * Drive both sides of the transfers; looks like irq handlers to both + * drivers except that the callbacks are invoked from soft interrupt + * context. */ static void dummy_timer(struct timer_list *t) { @@ -2734,7 +2738,7 @@ static int __init init(void) { int retval = -ENOMEM; int i; - struct dummy *dum[MAX_NUM_UDC]; + struct dummy *dum[MAX_NUM_UDC] = {}; if (usb_disabled()) return -ENODEV; diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index cfaeca457fa7..ce57961dfd2d 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -304,7 +304,7 @@ static struct pxa_ep *find_pxa_ep(struct pxa_udc *udc, * update_pxa_ep_matches - update pxa_ep cached values in all udc_usb_ep * @udc: pxa udc * - * Context: in_interrupt() + * Context: interrupt handler * * Updates all pxa_ep fields in udc_usb_ep structures, if this field was * previously set up (and is not NULL). The update is necessary is a @@ -859,7 +859,7 @@ static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req, * @ep: pxa physical endpoint * @req: usb request * - * Context: callable when in_interrupt() + * Context: interrupt handler * * Unload as many packets as possible from the fifo we use for usb OUT * transfers and put them into the request. Caller should have made sure @@ -997,7 +997,7 @@ static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req) * @ep: control endpoint * @req: request * - * Context: callable when in_interrupt() + * Context: interrupt handler * * Sends a request (or a part of the request) to the control endpoint (ep0 in). * If the request doesn't fit, the remaining part will be sent from irq. @@ -1036,8 +1036,8 @@ static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req) * @_req: usb request * @gfp_flags: flags * - * Context: normally called when !in_interrupt, but callable when in_interrupt() - * in the special case of ep0 setup : + * Context: thread context or from the interrupt handler in the + * special case of ep0 setup : * (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue) * * Returns 0 if succedeed, error otherwise @@ -1512,7 +1512,8 @@ static int should_disable_udc(struct pxa_udc *udc) * pxa_udc_pullup - Offer manual D+ pullup control * @_gadget: usb gadget using the control * @is_active: 0 if disconnect, else connect D+ pullup resistor - * Context: !in_interrupt() + * + * Context: task context, might sleep * * Returns 0 if OK, -EOPNOTSUPP if udc driver doesn't handle D+ pullup */ @@ -1560,7 +1561,7 @@ static int pxa_udc_vbus_session(struct usb_gadget *_gadget, int is_active) * @_gadget: usb gadget * @mA: current drawn * - * Context: !in_interrupt() + * Context: task context, might sleep * * Called after a configuration was chosen by a USB host, to inform how much * current can be drawn by the device from VBus line. @@ -1886,7 +1887,7 @@ stall: * @fifo_irq: 1 if triggered by fifo service type irq * @opc_irq: 1 if triggered by output packet complete type irq * - * Context : when in_interrupt() or with ep->lock held + * Context : interrupt handler * * Tries to transfer all pending request data into the endpoint and/or * transfer all pending data in the endpoint into usb requests. @@ -2011,7 +2012,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq) * Tries to transfer all pending request data into the endpoint and/or * transfer all pending data in the endpoint into usb requests. * - * Is always called when in_interrupt() and with ep->lock released. + * Is always called from the interrupt handler. ep->lock must not be held. */ static void handle_ep(struct pxa_ep *ep) { |