diff options
Diffstat (limited to 'drivers/usb/gadget')
83 files changed, 2986 insertions, 2754 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 5a084b9cfa3c..b21cd376c11a 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -96,6 +96,22 @@ config USB_GADGET_VBUS_DRAW This value will be used except for system-specific gadget drivers that have more specific information. +config USB_GADGET_STORAGE_NUM_BUFFERS + int "Number of storage pipeline buffers" + range 2 4 + default 2 + help + Usually 2 buffers are enough to establish a good buffering + pipeline. The number may be increased in order to compensate + for a bursty VFS behaviour. For instance there may be CPU wake up + latencies that makes the VFS to appear bursty in a system with + an CPU on-demand governor. Especially if DMA is doing IO to + offload the CPU. In this case the CPU will go into power + save often and spin up occasionally to move data within VFS. + If selecting USB_GADGET_DEBUG_FILES this value may be set by + a module parameter as well. + If unsure, say 2. + # # USB Peripheral Controller Support # @@ -255,12 +271,11 @@ config USB_S3C_HSOTG integrated into the S3C64XX series SoC. config USB_IMX - tristate "Freescale IMX USB Peripheral Controller" - depends on ARCH_MX1 + tristate "Freescale i.MX1 USB Peripheral Controller" + depends on ARCH_MXC help - Freescale's IMX series include an integrated full speed - USB 1.1 device controller. The controller in the IMX series - is register-compatible. + Freescale's i.MX1 includes an integrated full speed + USB 1.1 device controller. It has Six fixed-function endpoints, as well as endpoint zero (for control transfers). @@ -303,6 +318,18 @@ config USB_PXA_U2O PXA9xx Processor series include a high speed USB2.0 device controller, which support high speed and full speed USB peripheral. +config USB_GADGET_DWC3 + tristate "DesignWare USB3.0 (DRD) Controller" + depends on USB_DWC3 + select USB_GADGET_DUALSPEED + select USB_GADGET_SUPERSPEED + help + DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller + which can be configured for peripheral-only, host-only, hub-only + and Dual-Role operation. This Controller was first integrated into + the OMAP5 series of processors. More information about the OMAP5 + version of this controller, refer to http://www.ti.com/omap5. + # # Controllers available in both integrated and discrete versions # @@ -846,6 +873,16 @@ config USB_G_NOKIA It's only really useful for N900 hardware. If you're building a kernel for N900, say Y or M here. If unsure, say N. +config USB_G_ACM_MS + tristate "CDC Composite Device (ACM and mass storage)" + depends on BLOCK + help + This driver provides two functions in one configuration: + a mass storage, and a CDC ACM (serial port) link. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_acm_ms". + config USB_G_MULTI tristate "Multifunction Composite Gadget (EXPERIMENTAL)" depends on BLOCK && NET diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 9ba725af4a08..b54ac6190890 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -28,7 +28,7 @@ obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o obj-$(CONFIG_USB_LANGWELL) += langwell_udc.o obj-$(CONFIG_USB_EG20T) += pch_udc.o obj-$(CONFIG_USB_PXA_U2O) += mv_udc.o -mv_udc-y := mv_udc_core.o mv_udc_phy.o +mv_udc-y := mv_udc_core.o obj-$(CONFIG_USB_CI13XXX_MSM) += ci13xxx_msm.o obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o @@ -51,6 +51,7 @@ g_dbgp-y := dbgp.o g_nokia-y := nokia.o g_webcam-y := webcam.o g_ncm-y := ncm.o +g_acm_ms-y := acm_ms.o obj-$(CONFIG_USB_ZERO) += g_zero.o obj-$(CONFIG_USB_AUDIO) += g_audio.o @@ -69,3 +70,4 @@ obj-$(CONFIG_USB_G_MULTI) += g_multi.o obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o obj-$(CONFIG_USB_G_NCM) += g_ncm.o +obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c new file mode 100644 index 000000000000..fdb7aec3bd0c --- /dev/null +++ b/drivers/usb/gadget/acm_ms.c @@ -0,0 +1,256 @@ +/* + * acm_ms.c -- Composite driver, with ACM and mass storage support + * + * Copyright (C) 2008 David Brownell + * Copyright (C) 2008 Nokia Corporation + * Author: David Brownell + * Modified: Klaus Schwarzkopf <schwarzkopf@sensortherm.de> + * + * Heavily based on multi.c and cdc2.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/utsname.h> + +#include "u_serial.h" + +#define DRIVER_DESC "Composite Gadget (ACM + MS)" +#define DRIVER_VERSION "2011/10/10" + +/*-------------------------------------------------------------------------*/ + +/* + * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. + */ +#define ACM_MS_VENDOR_NUM 0x1d6b /* Linux Foundation */ +#define ACM_MS_PRODUCT_NUM 0x0106 /* Composite Gadget: ACM + MS*/ + +/*-------------------------------------------------------------------------*/ + +/* + * Kbuild is not very cooperative with respect to linking separately + * compiled library objects into one module. So for now we won't use + * separate compilation ... ensuring init/exit sections work to shrink + * the runtime footprint, and giving us at least some parts of what + * a "gcc --combine ... part1.c part2.c part3.c ... " build would. + */ + +#include "composite.c" +#include "usbstring.c" +#include "config.c" +#include "epautoconf.c" +#include "u_serial.c" +#include "f_acm.c" +#include "f_mass_storage.c" + +/*-------------------------------------------------------------------------*/ + +static struct usb_device_descriptor device_desc = { + .bLength = sizeof device_desc, + .bDescriptorType = USB_DT_DEVICE, + + .bcdUSB = cpu_to_le16(0x0200), + + .bDeviceClass = USB_CLASS_MISC /* 0xEF */, + .bDeviceSubClass = 2, + .bDeviceProtocol = 1, + + /* .bMaxPacketSize0 = f(hardware) */ + + /* Vendor and product id can be overridden by module parameters. */ + .idVendor = cpu_to_le16(ACM_MS_VENDOR_NUM), + .idProduct = cpu_to_le16(ACM_MS_PRODUCT_NUM), + /* .bcdDevice = f(hardware) */ + /* .iManufacturer = DYNAMIC */ + /* .iProduct = DYNAMIC */ + /* NO SERIAL NUMBER */ + /*.bNumConfigurations = DYNAMIC*/ +}; + +static struct usb_otg_descriptor otg_descriptor = { + .bLength = sizeof otg_descriptor, + .bDescriptorType = USB_DT_OTG, + + /* + * REVISIT SRP-only hardware is possible, although + * it would not be called "OTG" ... + */ + .bmAttributes = USB_OTG_SRP | USB_OTG_HNP, +}; + +static const struct usb_descriptor_header *otg_desc[] = { + (struct usb_descriptor_header *) &otg_descriptor, + NULL, +}; + + +/* string IDs are assigned dynamically */ + +#define STRING_MANUFACTURER_IDX 0 +#define STRING_PRODUCT_IDX 1 + +static char manufacturer[50]; + +static struct usb_string strings_dev[] = { + [STRING_MANUFACTURER_IDX].s = manufacturer, + [STRING_PRODUCT_IDX].s = DRIVER_DESC, + { } /* end of list */ +}; + +static struct usb_gadget_strings stringtab_dev = { + .language = 0x0409, /* en-us */ + .strings = strings_dev, +}; + +static struct usb_gadget_strings *dev_strings[] = { + &stringtab_dev, + NULL, +}; + +/****************************** Configurations ******************************/ + +static struct fsg_module_parameters fsg_mod_data = { .stall = 1 }; +FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); + +static struct fsg_common fsg_common; + +/*-------------------------------------------------------------------------*/ + +/* + * We _always_ have both ACM and mass storage functions. + */ +static int __init acm_ms_do_config(struct usb_configuration *c) +{ + int status; + + if (gadget_is_otg(c->cdev->gadget)) { + c->descriptors = otg_desc; + c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; + } + + + status = acm_bind_config(c, 0); + if (status < 0) + return status; + + status = fsg_bind_config(c->cdev, c, &fsg_common); + if (status < 0) + return status; + + return 0; +} + +static struct usb_configuration acm_ms_config_driver = { + .label = DRIVER_DESC, + .bConfigurationValue = 1, + /* .iConfiguration = DYNAMIC */ + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init acm_ms_bind(struct usb_composite_dev *cdev) +{ + int gcnum; + struct usb_gadget *gadget = cdev->gadget; + int status; + void *retp; + + /* set up serial link layer */ + status = gserial_setup(cdev->gadget, 1); + if (status < 0) + return status; + + /* set up mass storage function */ + retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data); + if (IS_ERR(retp)) { + status = PTR_ERR(retp); + goto fail0; + } + + /* set bcdDevice */ + gcnum = usb_gadget_controller_number(gadget); + if (gcnum >= 0) { + device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); + } else { + WARNING(cdev, "controller '%s' not recognized; trying %s\n", + gadget->name, + acm_ms_config_driver.label); + device_desc.bcdDevice = + cpu_to_le16(0x0300 | 0x0099); + } + + /* + * Allocate string descriptor numbers ... note that string + * contents can be overridden by the composite_dev glue. + */ + + /* device descriptor strings: manufacturer, product */ + snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", + init_utsname()->sysname, init_utsname()->release, + gadget->name); + status = usb_string_id(cdev); + if (status < 0) + goto fail1; + strings_dev[STRING_MANUFACTURER_IDX].id = status; + device_desc.iManufacturer = status; + + status = usb_string_id(cdev); + if (status < 0) + goto fail1; + strings_dev[STRING_PRODUCT_IDX].id = status; + device_desc.iProduct = status; + + /* register our configuration */ + status = usb_add_config(cdev, &acm_ms_config_driver, acm_ms_do_config); + if (status < 0) + goto fail1; + + dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n", + DRIVER_DESC); + fsg_common_put(&fsg_common); + return 0; + + /* error recovery */ +fail1: + fsg_common_put(&fsg_common); +fail0: + gserial_cleanup(); + return status; +} + +static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) +{ + gserial_cleanup(); + + return 0; +} + +static struct usb_composite_driver acm_ms_driver = { + .name = "g_acm_ms", + .dev = &device_desc, + .strings = dev_strings, + .unbind = __exit_p(acm_ms_unbind), +}; + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Klaus Schwarzkopf <schwarzkopf@sensortherm.de>"); +MODULE_LICENSE("GPL v2"); + +static int __init init(void) +{ + return usb_composite_probe(&acm_ms_driver, acm_ms_bind); +} +module_init(init); + +static void __exit cleanup(void) +{ + usb_composite_unregister(&acm_ms_driver); +} +module_exit(cleanup); diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 70f2b376c86d..4730016d7cd4 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* @@ -354,7 +345,7 @@ udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc) writel(tmp, &dev->ep[ep->num].regs->ctl); /* set max packet size */ - maxpacket = le16_to_cpu(desc->wMaxPacketSize); + maxpacket = usb_endpoint_maxp(desc); tmp = readl(&dev->ep[ep->num].regs->bufout_maxpkt); tmp = AMD_ADDBITS(tmp, maxpacket, UDC_EP_MAX_PKT_SIZE); ep->ep.maxpacket = maxpacket; @@ -3014,13 +3005,8 @@ __acquires(dev->lock) /* link up all endpoints */ udc_setup_endpoints(dev); - if (dev->gadget.speed == USB_SPEED_HIGH) { - dev_info(&dev->pdev->dev, "Connect: speed = %s\n", - "high"); - } else if (dev->gadget.speed == USB_SPEED_FULL) { - dev_info(&dev->pdev->dev, "Connect: speed = %s\n", - "full"); - } + dev_info(&dev->pdev->dev, "Connect: %s\n", + usb_speed_string(dev->gadget.speed)); /* init ep 0 */ activate_control_endpoints(dev); diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h index 1d1c7543468e..f87e29c65325 100644 --- a/drivers/usb/gadget/amd5536udc.h +++ b/drivers/usb/gadget/amd5536udc.h @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef AMD5536UDC_H diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index ddb118a76807..8efe0fa9228d 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -9,16 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 02111-1307, USA. */ #undef VERBOSE_DEBUG @@ -460,7 +450,7 @@ static void nuke(struct at91_ep *ep, int status) { struct at91_request *req; - // terminer chaque requete dans la queue + /* terminate any request in the queue */ ep->stopped = 1; if (list_empty(&ep->queue)) return; @@ -487,7 +477,7 @@ static int at91_ep_enable(struct usb_ep *_ep, || !desc || ep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT - || (maxpacket = le16_to_cpu(desc->wMaxPacketSize)) == 0 + || (maxpacket = usb_endpoint_maxp(desc)) == 0 || maxpacket > ep->maxpacket) { DBG("bad ep or descriptor\n"); return -EINVAL; @@ -788,7 +778,7 @@ static const struct usb_ep_ops at91_ep_ops = { .queue = at91_ep_queue, .dequeue = at91_ep_dequeue, .set_halt = at91_ep_set_halt, - // there's only imprecise fifo status reporting + /* there's only imprecise fifo status reporting */ }; /*-------------------------------------------------------------------------*/ @@ -846,7 +836,7 @@ static void udc_reinit(struct at91_udc *udc) ep->fifo_bank = 0; ep->ep.maxpacket = ep->maxpacket; ep->creg = (void __iomem *) udc->udp_baseaddr + AT91_UDP_CSR(i); - // initialiser une queue par endpoint + /* initialize one queue per endpoint */ INIT_LIST_HEAD(&ep->queue); } } @@ -952,7 +942,7 @@ static int at91_vbus_session(struct usb_gadget *gadget, int is_active) struct at91_udc *udc = to_udc(gadget); unsigned long flags; - // VDBG("vbus %s\n", is_active ? "on" : "off"); + /* VDBG("vbus %s\n", is_active ? "on" : "off"); */ spin_lock_irqsave(&udc->lock, flags); udc->vbus = (is_active != 0); if (udc->driver) @@ -1003,7 +993,7 @@ static const struct usb_gadget_ops at91_udc_ops = { * VBUS-powered devices may also also want to support bigger * power budgets after an appropriate SET_CONFIGURATION. */ - // .vbus_power = at91_vbus_power, + /* .vbus_power = at91_vbus_power, */ }; /*-------------------------------------------------------------------------*/ @@ -1072,7 +1062,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) ep->is_in = 0; } } else { - // REVISIT this happens sometimes under load; why?? + /* REVISIT this happens sometimes under load; why?? */ ERR("SETUP len %d, csr %08x\n", rxcount, csr); status = -EINVAL; } @@ -1451,7 +1441,7 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXSUSP); at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXRSM); at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXSUSP); - // VDBG("bus suspend\n"); + /* VDBG("bus suspend\n"); */ if (udc->suspended) continue; udc->suspended = 1; @@ -1473,7 +1463,7 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM); at91_udp_write(udc, AT91_UDP_IER, AT91_UDP_RXSUSP); at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM); - // VDBG("bus resume\n"); + /* VDBG("bus resume\n"); */ if (!udc->suspended) continue; udc->suspended = 0; @@ -1820,7 +1810,7 @@ static int __init at91udc_probe(struct platform_device *pdev) /* request UDC and maybe VBUS irqs */ udc->udp_irq = platform_get_irq(pdev, 0); retval = request_irq(udc->udp_irq, at91_udc_irq, - IRQF_DISABLED, driver_name, udc); + 0, driver_name, udc); if (retval < 0) { DBG("request irq %d failed\n", udc->udp_irq); goto fail1; @@ -1848,7 +1838,7 @@ static int __init at91udc_probe(struct platform_device *pdev) jiffies + VBUS_POLL_TIMEOUT); } else { if (request_irq(udc->board.vbus_pin, at91_vbus_irq, - IRQF_DISABLED, driver_name, udc)) { + 0, driver_name, udc)) { DBG("request vbus irq %d failed\n", udc->board.vbus_pin); retval = -EBUSY; diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 108ca54f9092..3c0315b86ace 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -7,16 +7,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef AT91_UDC_H diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 5b1665eb1bef..271a9d873608 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -527,7 +527,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc); - maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff; + maxpacket = usb_endpoint_maxp(desc) & 0x7ff; if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index) || ep->index == 0 @@ -571,7 +571,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) * Bits 11:12 specify number of _additional_ * transactions per microframe. */ - nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1; + nr_trans = ((usb_endpoint_maxp(desc) >> 11) & 3) + 1; if (nr_trans > 3) return -EINVAL; @@ -1718,13 +1718,12 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) spin_lock(&udc->lock); } - if (status & USBA_HIGH_SPEED) { - DBG(DBG_BUS, "High-speed bus reset detected\n"); + if (status & USBA_HIGH_SPEED) udc->gadget.speed = USB_SPEED_HIGH; - } else { - DBG(DBG_BUS, "Full-speed bus reset detected\n"); + else udc->gadget.speed = USB_SPEED_FULL; - } + DBG(DBG_BUS, "%s bus reset detected\n", + usb_speed_string(udc->gadget.speed)); ep0 = &usba_ep[0]; ep0->desc = &usba_ep0_desc; diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c index b1c1afbb8750..672674c2fb3d 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/cdc2.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c index 470981ad6f77..4eedfe557154 100644 --- a/drivers/usb/gadget/ci13xxx_msm.c +++ b/drivers/usb/gadget/ci13xxx_msm.c @@ -3,17 +3,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * */ #include <linux/module.h> diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 1265a8502ea0..83428f56253b 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -2101,7 +2101,7 @@ static int ep_enable(struct usb_ep *ep, mEp->num = usb_endpoint_num(desc); mEp->type = usb_endpoint_type(desc); - mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize); + mEp->ep.maxpacket = usb_endpoint_maxp(desc); dbg_event(_usb_addr(mEp), "ENABLE", 0); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index aef47414f5d5..8a5529d214fb 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -7,15 +7,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ @@ -164,7 +155,7 @@ int config_ep_by_speed(struct usb_gadget *g, ep_found: /* commit results */ - _ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize); + _ep->maxpacket = usb_endpoint_maxp(chosen_desc); _ep->desc = chosen_desc; _ep->comp_desc = NULL; _ep->maxburst = 0; @@ -551,9 +542,9 @@ static int bos_desc(struct usb_composite_dev *cdev) if (cdev->gadget->ops->get_config_params) cdev->gadget->ops->get_config_params(&dcd_config_params); else { - dcd_config_params.bU1devExitLat = USB_DEFULT_U1_DEV_EXIT_LAT; + dcd_config_params.bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT; dcd_config_params.bU2DevExitLat = - cpu_to_le16(USB_DEFULT_U2_DEV_EXIT_LAT); + cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT); } ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat; ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat; @@ -626,25 +617,9 @@ static int set_config(struct usb_composite_dev *cdev, result = 0; } - INFO(cdev, "%s speed config #%d: %s\n", - ({ char *speed; - switch (gadget->speed) { - case USB_SPEED_LOW: - speed = "low"; - break; - case USB_SPEED_FULL: - speed = "full"; - break; - case USB_SPEED_HIGH: - speed = "high"; - break; - case USB_SPEED_SUPER: - speed = "super"; - break; - default: - speed = "?"; - break; - } ; speed; }), number, c ? c->label : "unconfigured"); + INFO(cdev, "%s config #%d: %s\n", + usb_speed_string(gadget->speed), + number, c ? c->label : "unconfigured"); if (!c) goto done; diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index b2c001334876..7542a72ce51a 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -7,15 +7,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/errno.h> diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c index 8beefdd36787..f855ecf7a637 100644 --- a/drivers/usb/gadget/dbgp.c +++ b/drivers/usb/gadget/dbgp.c @@ -4,7 +4,6 @@ * Copyright (C) 2010 Stephane Duverger * * Released under the GPLv2. - * */ /* verbose messages */ diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index e755a9d267fc..ab8f1b488d54 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ @@ -439,7 +430,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) * maximum packet size. * For SS devices the wMaxPacketSize is limited by 1024. */ - max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff; + max = usb_endpoint_maxp(desc) & 0x7ff; /* drivers must not request bad settings, since lower levels * (hardware or its drivers) may not check. some endpoints @@ -1277,7 +1268,7 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep) int tmp; /* high bandwidth mode */ - tmp = le16_to_cpu(ep->desc->wMaxPacketSize); + tmp = usb_endpoint_maxp(ep->desc); tmp = (tmp >> 11) & 0x03; tmp *= 8 /* applies to entire frame */; limit += limit * tmp; diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 7a7e6b7e1fd6..596a0b464e61 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -7,16 +7,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/kernel.h> @@ -158,7 +148,7 @@ ep_matches ( * where it's an output parameter representing the full speed limit. * the usb spec fixes high speed bulk maxpacket at 512 bytes. */ - max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize); + max = 0x7ff & usb_endpoint_maxp(desc); switch (type) { case USB_ENDPOINT_XFER_INT: /* INT: limit 64 bytes full speed, 1024 high/super speed */ diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index aafc84f33e26..0cd764d59351 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index a9a4eade7e80..ec7ffcd0d0cd 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -460,7 +460,7 @@ static int audio_set_endpoint_req(struct usb_function *f, switch (ctrl->bRequest) { case UAC_SET_CUR: - value = 0; + value = len; break; case UAC_SET_MIN: @@ -499,7 +499,7 @@ static int audio_get_endpoint_req(struct usb_function *f, case UAC_GET_MIN: case UAC_GET_MAX: case UAC_GET_RES: - value = 3; + value = len; break; case UAC_GET_MEM: break; @@ -681,17 +681,18 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f) status = -ENOMEM; - /* supcard all relevant hardware speeds... we expect that when + /* copy descriptors, and track endpoint copies */ + f->descriptors = usb_copy_descriptors(f_audio_desc); + + /* + * support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds */ - - /* copy descriptors, and track endpoint copies */ if (gadget_is_dualspeed(c->cdev->gadget)) { c->highspeed = true; f->hs_descriptors = usb_copy_descriptors(f_audio_desc); - } else - f->descriptors = usb_copy_descriptors(f_audio_desc); + } return 0; diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index 3691a0cb9465..11c07cb7d337 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 046c6d0e6960..1a7b2dd7d408 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index c161a9aaeb7e..6b1c20b6c9b2 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -12,15 +12,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 83a266bdb40e..b2113420b806 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -7,15 +7,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index ca660d40b11a..6d87f288df4e 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 5b9339582007..52583a235330 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -112,8 +112,7 @@ * is not loaded (an empty string as "filename" in the fsg_config * structure causes error). The CD-ROM emulation includes a single * data track and no audio tracks; hence there need be only one - * backing file per LUN. Note also that the CD-ROM block length is - * set to 512 rather than the more common value 2048. + * backing file per LUN. * * * MSF includes support for module parameters. If gadget using it @@ -363,7 +362,7 @@ struct fsg_common { struct fsg_buffhd *next_buffhd_to_fill; struct fsg_buffhd *next_buffhd_to_drain; - struct fsg_buffhd buffhds[FSG_NUM_BUFFERS]; + struct fsg_buffhd *buffhds; int cmnd_size; u8 cmnd[MAX_COMMAND_SIZE]; @@ -745,7 +744,6 @@ static int do_read(struct fsg_common *common) u32 amount_left; loff_t file_offset, file_offset_tmp; unsigned int amount; - unsigned int partial_page; ssize_t nread; /* @@ -771,7 +769,7 @@ static int do_read(struct fsg_common *common) curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; return -EINVAL; } - file_offset = ((loff_t) lba) << 9; + file_offset = ((loff_t) lba) << curlun->blkbits; /* Carry out the file reads */ amount_left = common->data_size_from_cmnd; @@ -784,18 +782,10 @@ static int do_read(struct fsg_common *common) * Try to read the remaining amount. * But don't read more than the buffer size. * And don't try to read past the end of the file. - * Finally, if we're not at a page boundary, don't read past - * the next page. - * If this means reading 0 then we were asked to read past - * the end of file. */ amount = min(amount_left, FSG_BUFLEN); amount = min((loff_t)amount, curlun->file_length - file_offset); - partial_page = file_offset & (PAGE_CACHE_SIZE - 1); - if (partial_page > 0) - amount = min(amount, (unsigned int)PAGE_CACHE_SIZE - - partial_page); /* Wait for the next buffer to become available */ bh = common->next_buffhd_to_fill; @@ -812,7 +802,8 @@ static int do_read(struct fsg_common *common) if (amount == 0) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; bh->inreq->length = 0; bh->state = BUF_STATE_FULL; @@ -835,18 +826,25 @@ static int do_read(struct fsg_common *common) } else if (nread < amount) { LDBG(curlun, "partial file read: %d/%u\n", (int)nread, amount); - nread -= (nread & 511); /* Round down to a block */ + nread = round_down(nread, curlun->blksize); } file_offset += nread; amount_left -= nread; common->residue -= nread; + + /* + * Except at the end of the transfer, nread will be + * equal to the buffer size, which is divisible by the + * bulk-in maxpacket size. + */ bh->inreq->length = nread; bh->state = BUF_STATE_FULL; /* If an error occurred, report it and its position */ if (nread < amount) { curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -877,7 +875,6 @@ static int do_write(struct fsg_common *common) u32 amount_left_to_req, amount_left_to_write; loff_t usb_offset, file_offset, file_offset_tmp; unsigned int amount; - unsigned int partial_page; ssize_t nwritten; int rc; @@ -921,7 +918,7 @@ static int do_write(struct fsg_common *common) /* Carry out the file writes */ get_some_more = 1; - file_offset = usb_offset = ((loff_t) lba) << 9; + file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; amount_left_to_req = common->data_size_from_cmnd; amount_left_to_write = common->data_size_from_cmnd; @@ -933,41 +930,21 @@ static int do_write(struct fsg_common *common) /* * Figure out how much we want to get: - * Try to get the remaining amount. - * But don't get more than the buffer size. - * And don't try to go past the end of the file. - * If we're not at a page boundary, - * don't go past the next page. - * If this means getting 0, then we were asked - * to write past the end of file. - * Finally, round down to a block boundary. + * Try to get the remaining amount, + * but not more than the buffer size. */ amount = min(amount_left_to_req, FSG_BUFLEN); - amount = min((loff_t)amount, - curlun->file_length - usb_offset); - partial_page = usb_offset & (PAGE_CACHE_SIZE - 1); - if (partial_page > 0) - amount = min(amount, - (unsigned int)PAGE_CACHE_SIZE - partial_page); - - if (amount == 0) { + + /* Beyond the end of the backing file? */ + if (usb_offset >= curlun->file_length) { get_some_more = 0; curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = usb_offset >> 9; + curlun->sense_data_info = + usb_offset >> curlun->blkbits; curlun->info_valid = 1; continue; } - amount -= amount & 511; - if (amount == 0) { - - /* - * Why were we were asked to transfer a - * partial block? - */ - get_some_more = 0; - continue; - } /* Get the next buffer */ usb_offset += amount; @@ -977,12 +954,11 @@ static int do_write(struct fsg_common *common) get_some_more = 0; /* - * amount is always divisible by 512, hence by - * the bulk-out maxpacket size + * Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by + * the bulk-out maxpacket size. */ - bh->outreq->length = amount; - bh->bulk_out_intended_length = amount; - bh->outreq->short_not_ok = 1; + set_bulk_out_req_length(common, bh, amount); if (!start_out_transfer(common, bh)) /* Dunno what to do if common->fsg is NULL */ return -EIO; @@ -1002,7 +978,8 @@ static int do_write(struct fsg_common *common) /* Did something go wrong with the transfer? */ if (bh->outreq->status != 0) { curlun->sense_data = SS_COMMUNICATION_FAILURE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1016,6 +993,16 @@ static int do_write(struct fsg_common *common) amount = curlun->file_length - file_offset; } + /* Don't accept excess data. The spec doesn't say + * what to do in this case. We'll ignore the error. + */ + amount = min(amount, bh->bulk_out_intended_length); + + /* Don't write a partial block */ + amount = round_down(amount, curlun->blksize); + if (amount == 0) + goto empty_write; + /* Perform the write */ file_offset_tmp = file_offset; nwritten = vfs_write(curlun->filp, @@ -1033,8 +1020,7 @@ static int do_write(struct fsg_common *common) } else if (nwritten < amount) { LDBG(curlun, "partial file write: %d/%u\n", (int)nwritten, amount); - nwritten -= (nwritten & 511); - /* Round down to a block */ + nwritten = round_down(nwritten, curlun->blksize); } file_offset += nwritten; amount_left_to_write -= nwritten; @@ -1043,13 +1029,15 @@ static int do_write(struct fsg_common *common) /* If an error occurred, report it and its position */ if (nwritten < amount) { curlun->sense_data = SS_WRITE_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } + empty_write: /* Did the host decide to stop early? */ - if (bh->outreq->actual != bh->outreq->length) { + if (bh->outreq->actual < bh->bulk_out_intended_length) { common->short_packet_received = 1; break; } @@ -1129,8 +1117,8 @@ static int do_verify(struct fsg_common *common) return -EIO; /* No default reply */ /* Prepare to carry out the file verify */ - amount_left = verification_length << 9; - file_offset = ((loff_t) lba) << 9; + amount_left = verification_length << curlun->blkbits; + file_offset = ((loff_t) lba) << curlun->blkbits; /* Write out all the dirty buffers before invalidating them */ fsg_lun_fsync_sub(curlun); @@ -1148,8 +1136,6 @@ static int do_verify(struct fsg_common *common) * Try to read the remaining amount, but not more than * the buffer size. * And don't try to read past the end of the file. - * If this means reading 0 then we were asked to read - * past the end of file. */ amount = min(amount_left, FSG_BUFLEN); amount = min((loff_t)amount, @@ -1157,7 +1143,8 @@ static int do_verify(struct fsg_common *common) if (amount == 0) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1179,11 +1166,12 @@ static int do_verify(struct fsg_common *common) } else if (nread < amount) { LDBG(curlun, "partial file verify: %d/%u\n", (int)nread, amount); - nread -= nread & 511; /* Round down to a sector */ + nread = round_down(nread, curlun->blksize); } if (nread == 0) { curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = + file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1289,7 +1277,7 @@ static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh) put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); /* Max logical block */ - put_unaligned_be32(512, &buf[4]); /* Block length */ + put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ return 8; } @@ -1527,7 +1515,7 @@ static int do_read_format_capacities(struct fsg_common *common, put_unaligned_be32(curlun->num_sectors, &buf[0]); /* Number of blocks */ - put_unaligned_be32(512, &buf[4]); /* Block length */ + put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ buf[4] = 0x02; /* Current capacity */ return 12; } @@ -1607,7 +1595,7 @@ static int throw_away_data(struct fsg_common *common) common->next_buffhd_to_drain = bh->next; /* A short packet or an error ends everything */ - if (bh->outreq->actual != bh->outreq->length || + if (bh->outreq->actual < bh->bulk_out_intended_length || bh->outreq->status != 0) { raise_exception(common, FSG_STATE_ABORT_BULK_OUT); @@ -1623,12 +1611,11 @@ static int throw_away_data(struct fsg_common *common) amount = min(common->usb_amount_left, FSG_BUFLEN); /* - * amount is always divisible by 512, hence by + * Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by * the bulk-out maxpacket size. */ - bh->outreq->length = amount; - bh->bulk_out_intended_length = amount; - bh->outreq->short_not_ok = 1; + set_bulk_out_req_length(common, bh, amount); if (!start_out_transfer(common, bh)) /* Dunno what to do if common->fsg is NULL */ return -EIO; @@ -2022,7 +2009,8 @@ static int do_scsi_command(struct fsg_common *common) case READ_6: i = common->cmnd[4]; - common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + common->data_size_from_cmnd = (i == 0 ? 256 : i) << + common->curlun->blkbits; reply = check_command(common, 6, DATA_DIR_TO_HOST, (7<<1) | (1<<4), 1, "READ(6)"); @@ -2032,7 +2020,8 @@ static int do_scsi_command(struct fsg_common *common) case READ_10: common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]) << 9; + get_unaligned_be16(&common->cmnd[7]) << + common->curlun->blkbits; reply = check_command(common, 10, DATA_DIR_TO_HOST, (1<<1) | (0xf<<2) | (3<<7), 1, "READ(10)"); @@ -2042,7 +2031,8 @@ static int do_scsi_command(struct fsg_common *common) case READ_12: common->data_size_from_cmnd = - get_unaligned_be32(&common->cmnd[6]) << 9; + get_unaligned_be32(&common->cmnd[6]) << + common->curlun->blkbits; reply = check_command(common, 12, DATA_DIR_TO_HOST, (1<<1) | (0xf<<2) | (0xf<<6), 1, "READ(12)"); @@ -2142,7 +2132,8 @@ static int do_scsi_command(struct fsg_common *common) case WRITE_6: i = common->cmnd[4]; - common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + common->data_size_from_cmnd = (i == 0 ? 256 : i) << + common->curlun->blkbits; reply = check_command(common, 6, DATA_DIR_FROM_HOST, (7<<1) | (1<<4), 1, "WRITE(6)"); @@ -2152,7 +2143,8 @@ static int do_scsi_command(struct fsg_common *common) case WRITE_10: common->data_size_from_cmnd = - get_unaligned_be16(&common->cmnd[7]) << 9; + get_unaligned_be16(&common->cmnd[7]) << + common->curlun->blkbits; reply = check_command(common, 10, DATA_DIR_FROM_HOST, (1<<1) | (0xf<<2) | (3<<7), 1, "WRITE(10)"); @@ -2162,7 +2154,8 @@ static int do_scsi_command(struct fsg_common *common) case WRITE_12: common->data_size_from_cmnd = - get_unaligned_be32(&common->cmnd[6]) << 9; + get_unaligned_be32(&common->cmnd[6]) << + common->curlun->blkbits; reply = check_command(common, 12, DATA_DIR_FROM_HOST, (1<<1) | (0xf<<2) | (0xf<<6), 1, "WRITE(12)"); @@ -2297,7 +2290,6 @@ static int get_next_command(struct fsg_common *common) /* Queue a request to read a Bulk-only CBW */ set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN); - bh->outreq->short_not_ok = 1; if (!start_out_transfer(common, bh)) /* Don't know what to do if common->fsg is NULL */ return -EIO; @@ -2348,7 +2340,7 @@ reset: if (common->fsg) { fsg = common->fsg; - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &common->buffhds[i]; if (bh->inreq) { @@ -2401,12 +2393,11 @@ reset: goto reset; fsg->bulk_out->driver_data = common; fsg->bulk_out_enabled = 1; - common->bulk_out_maxpacket = - le16_to_cpu(fsg->bulk_out->desc->wMaxPacketSize); + common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc); clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); /* Allocate the requests */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &common->buffhds[i]; rc = alloc_request(common, fsg->bulk_in, &bh->inreq); @@ -2475,7 +2466,7 @@ static void handle_exception(struct fsg_common *common) /* Cancel all the pending transfers */ if (likely(common->fsg)) { - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &common->buffhds[i]; if (bh->inreq_busy) usb_ep_dequeue(common->fsg->bulk_in, bh->inreq); @@ -2487,7 +2478,7 @@ static void handle_exception(struct fsg_common *common) /* Wait until everything is idle */ for (;;) { int num_active = 0; - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &common->buffhds[i]; num_active += bh->inreq_busy + bh->outreq_busy; } @@ -2510,7 +2501,7 @@ static void handle_exception(struct fsg_common *common) */ spin_lock_irq(&common->lock); - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &common->buffhds[i]; bh->state = BUF_STATE_EMPTY; } @@ -2719,6 +2710,10 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, int nluns, i, rc; char *pathbuf; + rc = fsg_num_buffers_validate(); + if (rc != 0) + return ERR_PTR(rc); + /* Find out how many LUNs there should be */ nluns = cfg->nluns; if (nluns < 1 || nluns > FSG_MAX_LUNS) { @@ -2737,6 +2732,14 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, common->free_storage_on_release = 0; } + common->buffhds = kcalloc(fsg_num_buffers, + sizeof *(common->buffhds), GFP_KERNEL); + if (!common->buffhds) { + if (common->free_storage_on_release) + kfree(common); + return ERR_PTR(-ENOMEM); + } + common->ops = cfg->ops; common->private_data = cfg->private_data; @@ -2814,7 +2817,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, /* Data buffers cyclic list */ bh = common->buffhds; - i = FSG_NUM_BUFFERS; + i = fsg_num_buffers; goto buffhds_first_it; do { bh->next = bh + 1; @@ -2940,12 +2943,13 @@ static void fsg_common_release(struct kref *ref) { struct fsg_buffhd *bh = common->buffhds; - unsigned i = FSG_NUM_BUFFERS; + unsigned i = fsg_num_buffers; do { kfree(bh->buf); } while (++bh, --i); } + kfree(common->buffhds); if (common->free_storage_on_release) kfree(common); } @@ -3019,6 +3023,28 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) } } + if (gadget_is_superspeed(gadget)) { + unsigned max_burst; + + /* Calculate bMaxBurst, we know packet size is 1024 */ + max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15); + + fsg_ss_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; + + fsg_ss_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; + fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; + + f->ss_descriptors = usb_copy_descriptors(fsg_ss_function); + if (unlikely(!f->ss_descriptors)) { + usb_free_descriptors(f->hs_descriptors); + usb_free_descriptors(f->descriptors); + return -ENOMEM; + } + } + return 0; autoconf_fail: diff --git a/drivers/usb/gadget/f_midi.c b/drivers/usb/gadget/f_midi.c new file mode 100644 index 000000000000..67b222908cf9 --- /dev/null +++ b/drivers/usb/gadget/f_midi.c @@ -0,0 +1,998 @@ +/* + * f_midi.c -- USB MIDI class function driver + * + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Developed for Thumtronics by Grey Innovation + * Ben Williamson <ben.williamson@greyinnovation.com> + * + * Rewritten for the composite framework + * Copyright (C) 2011 Daniel Mack <zonque@gmail.com> + * + * Based on drivers/usb/gadget/f_audio.c, + * Copyright (C) 2008 Bryan Wu <cooloney@kernel.org> + * Copyright (C) 2008 Analog Devices, Inc + * + * and drivers/usb/gadget/midi.c, + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Ben Williamson <ben.williamson@greyinnovation.com> + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/utsname.h> +#include <linux/device.h> + +#include <sound/core.h> +#include <sound/initval.h> +#include <sound/rawmidi.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/audio.h> +#include <linux/usb/midi.h> + +MODULE_AUTHOR("Ben Williamson"); +MODULE_LICENSE("GPL v2"); + +static const char f_midi_shortname[] = "f_midi"; +static const char f_midi_longname[] = "MIDI Gadget"; + +/* + * We can only handle 16 cables on one single endpoint, as cable numbers are + * stored in 4-bit fields. And as the interface currently only holds one + * single endpoint, this is the maximum number of ports we can allow. + */ +#define MAX_PORTS 16 + +/* + * This is a gadget, and the IN/OUT naming is from the host's perspective. + * USB -> OUT endpoint -> rawmidi + * USB <- IN endpoint <- rawmidi + */ +struct gmidi_in_port { + struct f_midi *midi; + int active; + uint8_t cable; + uint8_t state; +#define STATE_UNKNOWN 0 +#define STATE_1PARAM 1 +#define STATE_2PARAM_1 2 +#define STATE_2PARAM_2 3 +#define STATE_SYSEX_0 4 +#define STATE_SYSEX_1 5 +#define STATE_SYSEX_2 6 + uint8_t data[2]; +}; + +struct f_midi { + struct usb_function func; + struct usb_gadget *gadget; + struct usb_ep *in_ep, *out_ep; + struct snd_card *card; + struct snd_rawmidi *rmidi; + + struct snd_rawmidi_substream *in_substream[MAX_PORTS]; + struct snd_rawmidi_substream *out_substream[MAX_PORTS]; + struct gmidi_in_port *in_port[MAX_PORTS]; + + unsigned long out_triggered; + struct tasklet_struct tasklet; + unsigned int in_ports; + unsigned int out_ports; + int index; + char *id; + unsigned int buflen, qlen; +}; + +static inline struct f_midi *func_to_midi(struct usb_function *f) +{ + return container_of(f, struct f_midi, func); +} + +static void f_midi_transmit(struct f_midi *midi, struct usb_request *req); + +DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); +DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); +DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(16); +DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(16); + +/* B.3.1 Standard AC Interface Descriptor */ +static struct usb_interface_descriptor ac_interface_desc __initdata = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + /* .bInterfaceNumber = DYNAMIC */ + /* .bNumEndpoints = DYNAMIC */ + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, + /* .iInterface = DYNAMIC */ +}; + +/* B.3.2 Class-Specific AC Interface Descriptor */ +static struct uac1_ac_header_descriptor_1 ac_header_desc __initdata = { + .bLength = UAC_DT_AC_HEADER_SIZE(1), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_HEADER, + .bcdADC = cpu_to_le16(0x0100), + .wTotalLength = cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)), + .bInCollection = 1, + /* .baInterfaceNr = DYNAMIC */ +}; + +/* B.4.1 Standard MS Interface Descriptor */ +static struct usb_interface_descriptor ms_interface_desc __initdata = { + .bLength = USB_DT_INTERFACE_SIZE, + .bDescriptorType = USB_DT_INTERFACE, + /* .bInterfaceNumber = DYNAMIC */ + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING, + /* .iInterface = DYNAMIC */ +}; + +/* B.4.2 Class-Specific MS Interface Descriptor */ +static struct usb_ms_header_descriptor ms_header_desc __initdata = { + .bLength = USB_DT_MS_HEADER_SIZE, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_HEADER, + .bcdMSC = cpu_to_le16(0x0100), + /* .wTotalLength = DYNAMIC */ +}; + +/* B.4.3 Embedded MIDI IN Jack Descriptor */ +static struct usb_midi_in_jack_descriptor jack_in_emb_desc = { + .bLength = USB_DT_MIDI_IN_SIZE, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, + .bJackType = USB_MS_EMBEDDED, + /* .bJackID = DYNAMIC */ +}; + +/* B.4.4 Embedded MIDI OUT Jack Descriptor */ +static struct usb_midi_out_jack_descriptor_16 jack_out_emb_desc = { + /* .bLength = DYNAMIC */ + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, + .bJackType = USB_MS_EMBEDDED, + /* .bJackID = DYNAMIC */ + /* .bNrInputPins = DYNAMIC */ + /* .pins = DYNAMIC */ +}; + +/* B.5.1 Standard Bulk OUT Endpoint Descriptor */ +static struct usb_endpoint_descriptor bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +/* B.5.2 Class-specific MS Bulk OUT Endpoint Descriptor */ +static struct usb_ms_endpoint_descriptor_16 ms_out_desc = { + /* .bLength = DYNAMIC */ + .bDescriptorType = USB_DT_CS_ENDPOINT, + .bDescriptorSubtype = USB_MS_GENERAL, + /* .bNumEmbMIDIJack = DYNAMIC */ + /* .baAssocJackID = DYNAMIC */ +}; + +/* B.6.1 Standard Bulk IN Endpoint Descriptor */ +static struct usb_endpoint_descriptor bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, +}; + +/* B.6.2 Class-specific MS Bulk IN Endpoint Descriptor */ +static struct usb_ms_endpoint_descriptor_16 ms_in_desc = { + /* .bLength = DYNAMIC */ + .bDescriptorType = USB_DT_CS_ENDPOINT, + .bDescriptorSubtype = USB_MS_GENERAL, + /* .bNumEmbMIDIJack = DYNAMIC */ + /* .baAssocJackID = DYNAMIC */ +}; + +/* string IDs are assigned dynamically */ + +#define STRING_FUNC_IDX 0 + +static struct usb_string midi_string_defs[] = { + [STRING_FUNC_IDX].s = "MIDI function", + { } /* end of list */ +}; + +static struct usb_gadget_strings midi_stringtab = { + .language = 0x0409, /* en-us */ + .strings = midi_string_defs, +}; + +static struct usb_gadget_strings *midi_strings[] = { + &midi_stringtab, + NULL, +}; + +static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length) +{ + struct usb_request *req; + + req = usb_ep_alloc_request(ep, GFP_ATOMIC); + if (req) { + req->length = length; + req->buf = kmalloc(length, GFP_ATOMIC); + if (!req->buf) { + usb_ep_free_request(ep, req); + req = NULL; + } + } + return req; +} + +static void free_ep_req(struct usb_ep *ep, struct usb_request *req) +{ + kfree(req->buf); + usb_ep_free_request(ep, req); +} + +static const uint8_t f_midi_cin_length[] = { + 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1 +}; + +/* + * Receives a chunk of MIDI data. + */ +static void f_midi_read_data(struct usb_ep *ep, int cable, + uint8_t *data, int length) +{ + struct f_midi *midi = ep->driver_data; + struct snd_rawmidi_substream *substream = midi->out_substream[cable]; + + if (!substream) + /* Nobody is listening - throw it on the floor. */ + return; + + if (!test_bit(cable, &midi->out_triggered)) + return; + + snd_rawmidi_receive(substream, data, length); +} + +static void f_midi_handle_out_data(struct usb_ep *ep, struct usb_request *req) +{ + unsigned int i; + u8 *buf = req->buf; + + for (i = 0; i + 3 < req->actual; i += 4) + if (buf[i] != 0) { + int cable = buf[i] >> 4; + int length = f_midi_cin_length[buf[i] & 0x0f]; + f_midi_read_data(ep, cable, &buf[i + 1], length); + } +} + +static void +f_midi_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct f_midi *midi = ep->driver_data; + struct usb_composite_dev *cdev = midi->func.config->cdev; + int status = req->status; + + switch (status) { + case 0: /* normal completion */ + if (ep == midi->out_ep) { + /* We received stuff. req is queued again, below */ + f_midi_handle_out_data(ep, req); + } else if (ep == midi->in_ep) { + /* Our transmit completed. See if there's more to go. + * f_midi_transmit eats req, don't queue it again. */ + f_midi_transmit(midi, req); + return; + } + break; + + /* this endpoint is normally active while we're configured */ + case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNRESET: /* request dequeued */ + case -ESHUTDOWN: /* disconnect from host */ + VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status, + req->actual, req->length); + if (ep == midi->out_ep) + f_midi_handle_out_data(ep, req); + + free_ep_req(ep, req); + return; + + case -EOVERFLOW: /* buffer overrun on read means that + * we didn't provide a big enough buffer. + */ + default: + DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name, + status, req->actual, req->length); + break; + case -EREMOTEIO: /* short read */ + break; + } + + status = usb_ep_queue(ep, req, GFP_ATOMIC); + if (status) { + ERROR(cdev, "kill %s: resubmit %d bytes --> %d\n", + ep->name, req->length, status); + usb_ep_set_halt(ep); + /* FIXME recover later ... somehow */ + } +} + +static int f_midi_start_ep(struct f_midi *midi, + struct usb_function *f, + struct usb_ep *ep) +{ + int err; + struct usb_composite_dev *cdev = f->config->cdev; + + if (ep->driver_data) + usb_ep_disable(ep); + + err = config_ep_by_speed(midi->gadget, f, ep); + if (err) { + ERROR(cdev, "can't configure %s: %d\n", ep->name, err); + return err; + } + + err = usb_ep_enable(ep); + if (err) { + ERROR(cdev, "can't start %s: %d\n", ep->name, err); + return err; + } + + ep->driver_data = midi; + + return 0; +} + +static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt) +{ + struct f_midi *midi = func_to_midi(f); + struct usb_composite_dev *cdev = f->config->cdev; + unsigned i; + int err; + + err = f_midi_start_ep(midi, f, midi->in_ep); + if (err) + return err; + + err = f_midi_start_ep(midi, f, midi->out_ep); + if (err) + return err; + + if (midi->out_ep->driver_data) + usb_ep_disable(midi->out_ep); + + err = config_ep_by_speed(midi->gadget, f, midi->out_ep); + if (err) { + ERROR(cdev, "can't configure %s: %d\n", + midi->out_ep->name, err); + return err; + } + + err = usb_ep_enable(midi->out_ep); + if (err) { + ERROR(cdev, "can't start %s: %d\n", + midi->out_ep->name, err); + return err; + } + + midi->out_ep->driver_data = midi; + + /* allocate a bunch of read buffers and queue them all at once. */ + for (i = 0; i < midi->qlen && err == 0; i++) { + struct usb_request *req = + alloc_ep_req(midi->out_ep, midi->buflen); + if (req == NULL) + return -ENOMEM; + + req->complete = f_midi_complete; + err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC); + if (err) { + ERROR(midi, "%s queue req: %d\n", + midi->out_ep->name, err); + } + } + + return 0; +} + +static void f_midi_disable(struct usb_function *f) +{ + struct f_midi *midi = func_to_midi(f); + struct usb_composite_dev *cdev = f->config->cdev; + + DBG(cdev, "disable\n"); + + /* + * just disable endpoints, forcing completion of pending i/o. + * all our completion handlers free their requests in this case. + */ + usb_ep_disable(midi->in_ep); + usb_ep_disable(midi->out_ep); +} + +static void f_midi_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct usb_composite_dev *cdev = f->config->cdev; + struct f_midi *midi = func_to_midi(f); + struct snd_card *card; + + DBG(cdev, "unbind\n"); + + /* just to be sure */ + f_midi_disable(f); + + card = midi->card; + midi->card = NULL; + if (card) + snd_card_free(card); + + kfree(midi->id); + midi->id = NULL; + + usb_free_descriptors(f->descriptors); + kfree(midi); +} + +static int f_midi_snd_free(struct snd_device *device) +{ + return 0; +} + +static void f_midi_transmit_packet(struct usb_request *req, uint8_t p0, + uint8_t p1, uint8_t p2, uint8_t p3) +{ + unsigned length = req->length; + u8 *buf = (u8 *)req->buf + length; + + buf[0] = p0; + buf[1] = p1; + buf[2] = p2; + buf[3] = p3; + req->length = length + 4; +} + +/* + * Converts MIDI commands to USB MIDI packets. + */ +static void f_midi_transmit_byte(struct usb_request *req, + struct gmidi_in_port *port, uint8_t b) +{ + uint8_t p0 = port->cable << 4; + + if (b >= 0xf8) { + f_midi_transmit_packet(req, p0 | 0x0f, b, 0, 0); + } else if (b >= 0xf0) { + switch (b) { + case 0xf0: + port->data[0] = b; + port->state = STATE_SYSEX_1; + break; + case 0xf1: + case 0xf3: + port->data[0] = b; + port->state = STATE_1PARAM; + break; + case 0xf2: + port->data[0] = b; + port->state = STATE_2PARAM_1; + break; + case 0xf4: + case 0xf5: + port->state = STATE_UNKNOWN; + break; + case 0xf6: + f_midi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0); + port->state = STATE_UNKNOWN; + break; + case 0xf7: + switch (port->state) { + case STATE_SYSEX_0: + f_midi_transmit_packet(req, + p0 | 0x05, 0xf7, 0, 0); + break; + case STATE_SYSEX_1: + f_midi_transmit_packet(req, + p0 | 0x06, port->data[0], 0xf7, 0); + break; + case STATE_SYSEX_2: + f_midi_transmit_packet(req, + p0 | 0x07, port->data[0], + port->data[1], 0xf7); + break; + } + port->state = STATE_UNKNOWN; + break; + } + } else if (b >= 0x80) { + port->data[0] = b; + if (b >= 0xc0 && b <= 0xdf) + port->state = STATE_1PARAM; + else + port->state = STATE_2PARAM_1; + } else { /* b < 0x80 */ + switch (port->state) { + case STATE_1PARAM: + if (port->data[0] < 0xf0) { + p0 |= port->data[0] >> 4; + } else { + p0 |= 0x02; + port->state = STATE_UNKNOWN; + } + f_midi_transmit_packet(req, p0, port->data[0], b, 0); + break; + case STATE_2PARAM_1: + port->data[1] = b; + port->state = STATE_2PARAM_2; + break; + case STATE_2PARAM_2: + if (port->data[0] < 0xf0) { + p0 |= port->data[0] >> 4; + port->state = STATE_2PARAM_1; + } else { + p0 |= 0x03; + port->state = STATE_UNKNOWN; + } + f_midi_transmit_packet(req, + p0, port->data[0], port->data[1], b); + break; + case STATE_SYSEX_0: + port->data[0] = b; + port->state = STATE_SYSEX_1; + break; + case STATE_SYSEX_1: + port->data[1] = b; + port->state = STATE_SYSEX_2; + break; + case STATE_SYSEX_2: + f_midi_transmit_packet(req, + p0 | 0x04, port->data[0], port->data[1], b); + port->state = STATE_SYSEX_0; + break; + } + } +} + +static void f_midi_transmit(struct f_midi *midi, struct usb_request *req) +{ + struct usb_ep *ep = midi->in_ep; + int i; + + if (!ep) + return; + + if (!req) + req = alloc_ep_req(ep, midi->buflen); + + if (!req) { + ERROR(midi, "gmidi_transmit: alloc_ep_request failed\n"); + return; + } + req->length = 0; + req->complete = f_midi_complete; + + for (i = 0; i < MAX_PORTS; i++) { + struct gmidi_in_port *port = midi->in_port[i]; + struct snd_rawmidi_substream *substream = midi->in_substream[i]; + + if (!port || !port->active || !substream) + continue; + + while (req->length + 3 < midi->buflen) { + uint8_t b; + if (snd_rawmidi_transmit(substream, &b, 1) != 1) { + port->active = 0; + break; + } + f_midi_transmit_byte(req, port, b); + } + } + + if (req->length > 0) + usb_ep_queue(ep, req, GFP_ATOMIC); + else + free_ep_req(ep, req); +} + +static void f_midi_in_tasklet(unsigned long data) +{ + struct f_midi *midi = (struct f_midi *) data; + f_midi_transmit(midi, NULL); +} + +static int f_midi_in_open(struct snd_rawmidi_substream *substream) +{ + struct f_midi *midi = substream->rmidi->private_data; + + if (!midi->in_port[substream->number]) + return -EINVAL; + + VDBG(midi, "%s()\n", __func__); + midi->in_substream[substream->number] = substream; + midi->in_port[substream->number]->state = STATE_UNKNOWN; + return 0; +} + +static int f_midi_in_close(struct snd_rawmidi_substream *substream) +{ + struct f_midi *midi = substream->rmidi->private_data; + + VDBG(midi, "%s()\n", __func__); + return 0; +} + +static void f_midi_in_trigger(struct snd_rawmidi_substream *substream, int up) +{ + struct f_midi *midi = substream->rmidi->private_data; + + if (!midi->in_port[substream->number]) + return; + + VDBG(midi, "%s() %d\n", __func__, up); + midi->in_port[substream->number]->active = up; + if (up) + tasklet_hi_schedule(&midi->tasklet); +} + +static int f_midi_out_open(struct snd_rawmidi_substream *substream) +{ + struct f_midi *midi = substream->rmidi->private_data; + + if (substream->number >= MAX_PORTS) + return -EINVAL; + + VDBG(midi, "%s()\n", __func__); + midi->out_substream[substream->number] = substream; + return 0; +} + +static int f_midi_out_close(struct snd_rawmidi_substream *substream) +{ + struct f_midi *midi = substream->rmidi->private_data; + + VDBG(midi, "%s()\n", __func__); + return 0; +} + +static void f_midi_out_trigger(struct snd_rawmidi_substream *substream, int up) +{ + struct f_midi *midi = substream->rmidi->private_data; + + VDBG(midi, "%s()\n", __func__); + + if (up) + set_bit(substream->number, &midi->out_triggered); + else + clear_bit(substream->number, &midi->out_triggered); +} + +static struct snd_rawmidi_ops gmidi_in_ops = { + .open = f_midi_in_open, + .close = f_midi_in_close, + .trigger = f_midi_in_trigger, +}; + +static struct snd_rawmidi_ops gmidi_out_ops = { + .open = f_midi_out_open, + .close = f_midi_out_close, + .trigger = f_midi_out_trigger +}; + +/* register as a sound "card" */ +static int f_midi_register_card(struct f_midi *midi) +{ + struct snd_card *card; + struct snd_rawmidi *rmidi; + int err; + static struct snd_device_ops ops = { + .dev_free = f_midi_snd_free, + }; + + err = snd_card_create(midi->index, midi->id, THIS_MODULE, 0, &card); + if (err < 0) { + ERROR(midi, "snd_card_create() failed\n"); + goto fail; + } + midi->card = card; + + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, midi, &ops); + if (err < 0) { + ERROR(midi, "snd_device_new() failed: error %d\n", err); + goto fail; + } + + strcpy(card->driver, f_midi_longname); + strcpy(card->longname, f_midi_longname); + strcpy(card->shortname, f_midi_shortname); + + /* Set up rawmidi */ + snd_component_add(card, "MIDI"); + err = snd_rawmidi_new(card, card->longname, 0, + midi->out_ports, midi->in_ports, &rmidi); + if (err < 0) { + ERROR(midi, "snd_rawmidi_new() failed: error %d\n", err); + goto fail; + } + midi->rmidi = rmidi; + strcpy(rmidi->name, card->shortname); + rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | + SNDRV_RAWMIDI_INFO_INPUT | + SNDRV_RAWMIDI_INFO_DUPLEX; + rmidi->private_data = midi; + + /* + * Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT. + * It's an upside-down world being a gadget. + */ + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops); + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops); + + snd_card_set_dev(card, &midi->gadget->dev); + + /* register it - we're ready to go */ + err = snd_card_register(card); + if (err < 0) { + ERROR(midi, "snd_card_register() failed\n"); + goto fail; + } + + VDBG(midi, "%s() finished ok\n", __func__); + return 0; + +fail: + if (midi->card) { + snd_card_free(midi->card); + midi->card = NULL; + } + return err; +} + +/* MIDI function driver setup/binding */ + +static int __init +f_midi_bind(struct usb_configuration *c, struct usb_function *f) +{ + struct usb_descriptor_header *midi_function[(MAX_PORTS * 2) + 12]; + struct usb_midi_in_jack_descriptor jack_in_ext_desc[MAX_PORTS]; + struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc[MAX_PORTS]; + struct usb_composite_dev *cdev = c->cdev; + struct f_midi *midi = func_to_midi(f); + int status, n, jack = 1, i = 0; + + /* maybe allocate device-global string ID */ + if (midi_string_defs[0].id == 0) { + status = usb_string_id(c->cdev); + if (status < 0) + goto fail; + midi_string_defs[0].id = status; + } + + /* We have two interfaces, AudioControl and MIDIStreaming */ + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + ac_interface_desc.bInterfaceNumber = status; + + status = usb_interface_id(c, f); + if (status < 0) + goto fail; + ms_interface_desc.bInterfaceNumber = status; + ac_header_desc.baInterfaceNr[0] = status; + + status = -ENODEV; + + /* allocate instance-specific endpoints */ + midi->in_ep = usb_ep_autoconfig(cdev->gadget, &bulk_in_desc); + if (!midi->in_ep) + goto fail; + midi->in_ep->driver_data = cdev; /* claim */ + + midi->out_ep = usb_ep_autoconfig(cdev->gadget, &bulk_out_desc); + if (!midi->out_ep) + goto fail; + midi->out_ep->driver_data = cdev; /* claim */ + + /* + * construct the function's descriptor set. As the number of + * input and output MIDI ports is configurable, we have to do + * it that way. + */ + + /* add the headers - these are always the same */ + midi_function[i++] = (struct usb_descriptor_header *) &ac_interface_desc; + midi_function[i++] = (struct usb_descriptor_header *) &ac_header_desc; + midi_function[i++] = (struct usb_descriptor_header *) &ms_interface_desc; + + /* calculate the header's wTotalLength */ + n = USB_DT_MS_HEADER_SIZE + + (1 + midi->in_ports) * USB_DT_MIDI_IN_SIZE + + (1 + midi->out_ports) * USB_DT_MIDI_OUT_SIZE(1); + ms_header_desc.wTotalLength = cpu_to_le16(n); + + midi_function[i++] = (struct usb_descriptor_header *) &ms_header_desc; + + /* we have one embedded IN jack */ + jack_in_emb_desc.bJackID = jack++; + midi_function[i++] = (struct usb_descriptor_header *) &jack_in_emb_desc; + + /* and a dynamic amount of external IN jacks */ + for (n = 0; n < midi->in_ports; n++) { + struct usb_midi_in_jack_descriptor *ext = &jack_in_ext_desc[n]; + + ext->bLength = USB_DT_MIDI_IN_SIZE; + ext->bDescriptorType = USB_DT_CS_INTERFACE; + ext->bDescriptorSubtype = USB_MS_MIDI_IN_JACK; + ext->bJackType = USB_MS_EXTERNAL; + ext->bJackID = jack++; + ext->iJack = 0; + + midi_function[i++] = (struct usb_descriptor_header *) ext; + } + + /* one embedded OUT jack ... */ + jack_out_emb_desc.bLength = USB_DT_MIDI_OUT_SIZE(midi->in_ports); + jack_out_emb_desc.bJackID = jack++; + jack_out_emb_desc.bNrInputPins = midi->in_ports; + /* ... which referencess all external IN jacks */ + for (n = 0; n < midi->in_ports; n++) { + jack_out_emb_desc.pins[n].baSourceID = jack_in_ext_desc[n].bJackID; + jack_out_emb_desc.pins[n].baSourcePin = 1; + } + + midi_function[i++] = (struct usb_descriptor_header *) &jack_out_emb_desc; + + /* and multiple external OUT jacks ... */ + for (n = 0; n < midi->out_ports; n++) { + struct usb_midi_out_jack_descriptor_1 *ext = &jack_out_ext_desc[n]; + int m; + + ext->bLength = USB_DT_MIDI_OUT_SIZE(1); + ext->bDescriptorType = USB_DT_CS_INTERFACE; + ext->bDescriptorSubtype = USB_MS_MIDI_OUT_JACK; + ext->bJackType = USB_MS_EXTERNAL; + ext->bJackID = jack++; + ext->bNrInputPins = 1; + ext->iJack = 0; + /* ... which all reference the same embedded IN jack */ + for (m = 0; m < midi->out_ports; m++) { + ext->pins[m].baSourceID = jack_in_emb_desc.bJackID; + ext->pins[m].baSourcePin = 1; + } + + midi_function[i++] = (struct usb_descriptor_header *) ext; + } + + /* configure the endpoint descriptors ... */ + ms_out_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->in_ports); + ms_out_desc.bNumEmbMIDIJack = midi->in_ports; + for (n = 0; n < midi->in_ports; n++) + ms_out_desc.baAssocJackID[n] = jack_in_emb_desc.bJackID; + + ms_in_desc.bLength = USB_DT_MS_ENDPOINT_SIZE(midi->out_ports); + ms_in_desc.bNumEmbMIDIJack = midi->out_ports; + for (n = 0; n < midi->out_ports; n++) + ms_in_desc.baAssocJackID[n] = jack_out_emb_desc.bJackID; + + /* ... and add them to the list */ + midi_function[i++] = (struct usb_descriptor_header *) &bulk_out_desc; + midi_function[i++] = (struct usb_descriptor_header *) &ms_out_desc; + midi_function[i++] = (struct usb_descriptor_header *) &bulk_in_desc; + midi_function[i++] = (struct usb_descriptor_header *) &ms_in_desc; + midi_function[i++] = NULL; + + /* + * support all relevant hardware speeds... we expect that when + * hardware is dual speed, all bulk-capable endpoints work at + * both speeds + */ + /* copy descriptors, and track endpoint copies */ + if (gadget_is_dualspeed(c->cdev->gadget)) { + c->highspeed = true; + bulk_in_desc.wMaxPacketSize = cpu_to_le16(512); + bulk_out_desc.wMaxPacketSize = cpu_to_le16(512); + f->hs_descriptors = usb_copy_descriptors(midi_function); + } else { + f->descriptors = usb_copy_descriptors(midi_function); + } + + return 0; + +fail: + /* we might as well release our claims on endpoints */ + if (midi->out_ep) + midi->out_ep->driver_data = NULL; + if (midi->in_ep) + midi->in_ep->driver_data = NULL; + + ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); + + return status; +} + +/** + * f_midi_bind_config - add USB MIDI function to a configuration + * @c: the configuration to supcard the USB audio function + * @index: the soundcard index to use for the ALSA device creation + * @id: the soundcard id to use for the ALSA device creation + * @buflen: the buffer length to use + * @qlen the number of read requests to pre-allocate + * Context: single threaded during gadget setup + * + * Returns zero on success, else negative errno. + */ +int __init f_midi_bind_config(struct usb_configuration *c, + int index, char *id, + unsigned int in_ports, + unsigned int out_ports, + unsigned int buflen, + unsigned int qlen) +{ + struct f_midi *midi; + int status, i; + + /* sanity check */ + if (in_ports > MAX_PORTS || out_ports > MAX_PORTS) + return -EINVAL; + + /* allocate and initialize one new instance */ + midi = kzalloc(sizeof *midi, GFP_KERNEL); + if (!midi) { + status = -ENOMEM; + goto fail; + } + + for (i = 0; i < in_ports; i++) { + struct gmidi_in_port *port = kzalloc(sizeof(*port), GFP_KERNEL); + if (!port) { + status = -ENOMEM; + goto setup_fail; + } + + port->midi = midi; + port->active = 0; + port->cable = i; + midi->in_port[i] = port; + } + + midi->gadget = c->cdev->gadget; + tasklet_init(&midi->tasklet, f_midi_in_tasklet, (unsigned long) midi); + + /* set up ALSA midi devices */ + midi->in_ports = in_ports; + midi->out_ports = out_ports; + status = f_midi_register_card(midi); + if (status < 0) + goto setup_fail; + + midi->func.name = "gmidi function"; + midi->func.strings = midi_strings; + midi->func.bind = f_midi_bind; + midi->func.unbind = f_midi_unbind; + midi->func.set_alt = f_midi_set_alt; + midi->func.disable = f_midi_disable; + + midi->id = kstrdup(id, GFP_KERNEL); + midi->index = index; + midi->buflen = buflen; + midi->qlen = qlen; + + status = usb_add_function(c, &midi->func); + if (status) + goto setup_fail; + + return 0; + +setup_fail: + for (--i; i >= 0; i--) + kfree(midi->in_port[i]); + kfree(midi); +fail: + return status; +} + diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c index ae69ed7e6b99..aab8eded045b 100644 --- a/drivers/usb/gadget/f_ncm.c +++ b/drivers/usb/gadget/f_ncm.c @@ -13,15 +13,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c index 394502abeb96..e3f74bf5da2d 100644 --- a/drivers/usb/gadget/f_obex.c +++ b/drivers/usb/gadget/f_obex.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index 8f8d3f6cd89e..349077033338 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Â See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA */ #include <linux/mm.h> @@ -434,6 +424,7 @@ static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt) config_ep_by_speed(gadget, f, fp->out_ep)) { fp->in_ep->desc = NULL; fp->out_ep->desc = NULL; + spin_unlock(&port->lock); return -EINVAL; } usb_ep_enable(fp->out_ep); diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 3ea4666be3d0..704d1d94f72a 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -11,15 +11,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index e18b4f520951..168906d2b5d4 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index 3dc53754ab60..c1540648125a 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/slab.h> diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c index 7a8b9aa4aea5..2022fe492148 100644 --- a/drivers/usb/gadget/f_uvc.c +++ b/drivers/usb/gadget/f_uvc.c @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h index e18a6636c283..abf832935134 100644 --- a/drivers/usb/gadget/f_uvc.h +++ b/drivers/usb/gadget/f_uvc.h @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #ifndef _F_UVC_H_ diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 639e14a2fd15..3ac4f51cd0bb 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -69,8 +69,7 @@ * each LUN would be settable independently as a disk drive or a CD-ROM * drive, but currently all LUNs have to be the same type. The CD-ROM * emulation includes a single data track and no audio tracks; hence there - * need be only one backing file per LUN. Note also that the CD-ROM block - * length is set to 512 rather than the more common value 2048. + * need be only one backing file per LUN. * * Requirements are modest; only a bulk-in and a bulk-out endpoint are * needed (an interrupt-out endpoint is also needed for CBI). The memory @@ -461,7 +460,6 @@ struct fsg_dev { struct fsg_buffhd *next_buffhd_to_fill; struct fsg_buffhd *next_buffhd_to_drain; - struct fsg_buffhd buffhds[FSG_NUM_BUFFERS]; int thread_wakeup_needed; struct completion thread_notifier; @@ -488,6 +486,8 @@ struct fsg_dev { unsigned int nluns; struct fsg_lun *luns; struct fsg_lun *curlun; + /* Must be the last entry */ + struct fsg_buffhd buffhds[]; }; typedef void (*fsg_routine_t)(struct fsg_dev *); @@ -586,7 +586,19 @@ dev_qualifier = { .bNumConfigurations = 1, }; +static int populate_bos(struct fsg_dev *fsg, u8 *buf) +{ + memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE); + buf += USB_DT_BOS_SIZE; + + memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE); + buf += USB_DT_USB_EXT_CAP_SIZE; + memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE); + + return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE + + USB_DT_USB_EXT_CAP_SIZE; +} /* * Config descriptors must agree with the code that sets configurations @@ -935,7 +947,8 @@ static int standard_setup_req(struct fsg_dev *fsg, break; case USB_DT_DEVICE_QUALIFIER: VDBG(fsg, "get device qualifier\n"); - if (!gadget_is_dualspeed(fsg->gadget)) + if (!gadget_is_dualspeed(fsg->gadget) || + fsg->gadget->speed == USB_SPEED_SUPER) break; /* * Assume ep0 uses the same maxpacket value for both @@ -948,7 +961,8 @@ static int standard_setup_req(struct fsg_dev *fsg, case USB_DT_OTHER_SPEED_CONFIG: VDBG(fsg, "get other-speed config descriptor\n"); - if (!gadget_is_dualspeed(fsg->gadget)) + if (!gadget_is_dualspeed(fsg->gadget) || + fsg->gadget->speed == USB_SPEED_SUPER) break; goto get_config; case USB_DT_CONFIG: @@ -967,7 +981,15 @@ get_config: value = usb_gadget_get_string(&fsg_stringtab, w_value & 0xff, req->buf); break; + + case USB_DT_BOS: + VDBG(fsg, "get bos descriptor\n"); + + if (gadget_is_superspeed(fsg->gadget)) + value = populate_bos(fsg, req->buf); + break; } + break; /* One config, two speeds */ @@ -1136,7 +1158,6 @@ static int do_read(struct fsg_dev *fsg) u32 amount_left; loff_t file_offset, file_offset_tmp; unsigned int amount; - unsigned int partial_page; ssize_t nread; /* Get the starting Logical Block Address and check that it's @@ -1158,7 +1179,7 @@ static int do_read(struct fsg_dev *fsg) curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; return -EINVAL; } - file_offset = ((loff_t) lba) << 9; + file_offset = ((loff_t) lba) << curlun->blkbits; /* Carry out the file reads */ amount_left = fsg->data_size_from_cmnd; @@ -1171,17 +1192,10 @@ static int do_read(struct fsg_dev *fsg) * Try to read the remaining amount. * But don't read more than the buffer size. * And don't try to read past the end of the file. - * Finally, if we're not at a page boundary, don't read past - * the next page. - * If this means reading 0 then we were asked to read past - * the end of file. */ + */ amount = min((unsigned int) amount_left, mod_data.buflen); amount = min((loff_t) amount, curlun->file_length - file_offset); - partial_page = file_offset & (PAGE_CACHE_SIZE - 1); - if (partial_page > 0) - amount = min(amount, (unsigned int) PAGE_CACHE_SIZE - - partial_page); /* Wait for the next buffer to become available */ bh = fsg->next_buffhd_to_fill; @@ -1196,7 +1210,7 @@ static int do_read(struct fsg_dev *fsg) if (amount == 0) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; bh->inreq->length = 0; bh->state = BUF_STATE_FULL; @@ -1221,18 +1235,23 @@ static int do_read(struct fsg_dev *fsg) } else if (nread < amount) { LDBG(curlun, "partial file read: %d/%u\n", (int) nread, amount); - nread -= (nread & 511); // Round down to a block + nread = round_down(nread, curlun->blksize); } file_offset += nread; amount_left -= nread; fsg->residue -= nread; + + /* Except at the end of the transfer, nread will be + * equal to the buffer size, which is divisible by the + * bulk-in maxpacket size. + */ bh->inreq->length = nread; bh->state = BUF_STATE_FULL; /* If an error occurred, report it and its position */ if (nread < amount) { curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1262,7 +1281,6 @@ static int do_write(struct fsg_dev *fsg) u32 amount_left_to_req, amount_left_to_write; loff_t usb_offset, file_offset, file_offset_tmp; unsigned int amount; - unsigned int partial_page; ssize_t nwritten; int rc; @@ -1303,7 +1321,7 @@ static int do_write(struct fsg_dev *fsg) /* Carry out the file writes */ get_some_more = 1; - file_offset = usb_offset = ((loff_t) lba) << 9; + file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; while (amount_left_to_write > 0) { @@ -1313,38 +1331,20 @@ static int do_write(struct fsg_dev *fsg) if (bh->state == BUF_STATE_EMPTY && get_some_more) { /* Figure out how much we want to get: - * Try to get the remaining amount. - * But don't get more than the buffer size. - * And don't try to go past the end of the file. - * If we're not at a page boundary, - * don't go past the next page. - * If this means getting 0, then we were asked - * to write past the end of file. - * Finally, round down to a block boundary. */ + * Try to get the remaining amount, + * but not more than the buffer size. + */ amount = min(amount_left_to_req, mod_data.buflen); - amount = min((loff_t) amount, curlun->file_length - - usb_offset); - partial_page = usb_offset & (PAGE_CACHE_SIZE - 1); - if (partial_page > 0) - amount = min(amount, - (unsigned int) PAGE_CACHE_SIZE - partial_page); - - if (amount == 0) { + + /* Beyond the end of the backing file? */ + if (usb_offset >= curlun->file_length) { get_some_more = 0; curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = usb_offset >> 9; + curlun->sense_data_info = usb_offset >> curlun->blkbits; curlun->info_valid = 1; continue; } - amount -= (amount & 511); - if (amount == 0) { - - /* Why were we were asked to transfer a - * partial block? */ - get_some_more = 0; - continue; - } /* Get the next buffer */ usb_offset += amount; @@ -1353,11 +1353,11 @@ static int do_write(struct fsg_dev *fsg) if (amount_left_to_req == 0) get_some_more = 0; - /* amount is always divisible by 512, hence by - * the bulk-out maxpacket size */ - bh->outreq->length = bh->bulk_out_intended_length = - amount; - bh->outreq->short_not_ok = 1; + /* Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by + * the bulk-out maxpacket size. + */ + set_bulk_out_req_length(fsg, bh, amount); start_transfer(fsg, fsg->bulk_out, bh->outreq, &bh->outreq_busy, &bh->state); fsg->next_buffhd_to_fill = bh->next; @@ -1376,7 +1376,7 @@ static int do_write(struct fsg_dev *fsg) /* Did something go wrong with the transfer? */ if (bh->outreq->status != 0) { curlun->sense_data = SS_COMMUNICATION_FAILURE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1390,6 +1390,16 @@ static int do_write(struct fsg_dev *fsg) amount = curlun->file_length - file_offset; } + /* Don't accept excess data. The spec doesn't say + * what to do in this case. We'll ignore the error. + */ + amount = min(amount, bh->bulk_out_intended_length); + + /* Don't write a partial block */ + amount = round_down(amount, curlun->blksize); + if (amount == 0) + goto empty_write; + /* Perform the write */ file_offset_tmp = file_offset; nwritten = vfs_write(curlun->filp, @@ -1408,8 +1418,7 @@ static int do_write(struct fsg_dev *fsg) } else if (nwritten < amount) { LDBG(curlun, "partial file write: %d/%u\n", (int) nwritten, amount); - nwritten -= (nwritten & 511); - // Round down to a block + nwritten = round_down(nwritten, curlun->blksize); } file_offset += nwritten; amount_left_to_write -= nwritten; @@ -1418,13 +1427,14 @@ static int do_write(struct fsg_dev *fsg) /* If an error occurred, report it and its position */ if (nwritten < amount) { curlun->sense_data = SS_WRITE_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } + empty_write: /* Did the host decide to stop early? */ - if (bh->outreq->actual != bh->outreq->length) { + if (bh->outreq->actual < bh->bulk_out_intended_length) { fsg->short_packet_received = 1; break; } @@ -1500,8 +1510,8 @@ static int do_verify(struct fsg_dev *fsg) return -EIO; // No default reply /* Prepare to carry out the file verify */ - amount_left = verification_length << 9; - file_offset = ((loff_t) lba) << 9; + amount_left = verification_length << curlun->blkbits; + file_offset = ((loff_t) lba) << curlun->blkbits; /* Write out all the dirty buffers before invalidating them */ fsg_lun_fsync_sub(curlun); @@ -1519,15 +1529,14 @@ static int do_verify(struct fsg_dev *fsg) * Try to read the remaining amount, but not more than * the buffer size. * And don't try to read past the end of the file. - * If this means reading 0 then we were asked to read - * past the end of file. */ + */ amount = min((unsigned int) amount_left, mod_data.buflen); amount = min((loff_t) amount, curlun->file_length - file_offset); if (amount == 0) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1550,11 +1559,11 @@ static int do_verify(struct fsg_dev *fsg) } else if (nread < amount) { LDBG(curlun, "partial file verify: %d/%u\n", (int) nread, amount); - nread -= (nread & 511); // Round down to a sector + nread = round_down(nread, curlun->blksize); } if (nread == 0) { curlun->sense_data = SS_UNRECOVERED_READ_ERROR; - curlun->sense_data_info = file_offset >> 9; + curlun->sense_data_info = file_offset >> curlun->blkbits; curlun->info_valid = 1; break; } @@ -1668,7 +1677,7 @@ static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); /* Max logical block */ - put_unaligned_be32(512, &buf[4]); /* Block length */ + put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ return 8; } @@ -1890,7 +1899,7 @@ static int do_read_format_capacities(struct fsg_dev *fsg, put_unaligned_be32(curlun->num_sectors, &buf[0]); /* Number of blocks */ - put_unaligned_be32(512, &buf[4]); /* Block length */ + put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ buf[4] = 0x02; /* Current capacity */ return 12; } @@ -1969,7 +1978,7 @@ static int throw_away_data(struct fsg_dev *fsg) fsg->next_buffhd_to_drain = bh->next; /* A short packet or an error ends everything */ - if (bh->outreq->actual != bh->outreq->length || + if (bh->outreq->actual < bh->bulk_out_intended_length || bh->outreq->status != 0) { raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); return -EINTR; @@ -1983,11 +1992,11 @@ static int throw_away_data(struct fsg_dev *fsg) amount = min(fsg->usb_amount_left, (u32) mod_data.buflen); - /* amount is always divisible by 512, hence by - * the bulk-out maxpacket size */ - bh->outreq->length = bh->bulk_out_intended_length = - amount; - bh->outreq->short_not_ok = 1; + /* Except at the end of the transfer, amount will be + * equal to the buffer size, which is divisible by + * the bulk-out maxpacket size. + */ + set_bulk_out_req_length(fsg, bh, amount); start_transfer(fsg, fsg->bulk_out, bh->outreq, &bh->outreq_busy, &bh->state); fsg->next_buffhd_to_fill = bh->next; @@ -2415,7 +2424,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case READ_6: i = fsg->cmnd[4]; - fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, (7<<1) | (1<<4), 1, "READ(6)")) == 0) @@ -2424,7 +2433,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case READ_10: fsg->data_size_from_cmnd = - get_unaligned_be16(&fsg->cmnd[7]) << 9; + get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, (1<<1) | (0xf<<2) | (3<<7), 1, "READ(10)")) == 0) @@ -2433,7 +2442,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case READ_12: fsg->data_size_from_cmnd = - get_unaligned_be32(&fsg->cmnd[6]) << 9; + get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST, (1<<1) | (0xf<<2) | (0xf<<6), 1, "READ(12)")) == 0) @@ -2519,7 +2528,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case WRITE_6: i = fsg->cmnd[4]; - fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, (7<<1) | (1<<4), 1, "WRITE(6)")) == 0) @@ -2528,7 +2537,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case WRITE_10: fsg->data_size_from_cmnd = - get_unaligned_be16(&fsg->cmnd[7]) << 9; + get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, (1<<1) | (0xf<<2) | (3<<7), 1, "WRITE(10)")) == 0) @@ -2537,7 +2546,7 @@ static int do_scsi_command(struct fsg_dev *fsg) case WRITE_12: fsg->data_size_from_cmnd = - get_unaligned_be32(&fsg->cmnd[6]) << 9; + get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits; if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST, (1<<1) | (0xf<<2) | (0xf<<6), 1, "WRITE(12)")) == 0) @@ -2666,7 +2675,6 @@ static int get_next_command(struct fsg_dev *fsg) /* Queue a request to read a Bulk-only CBW */ set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN); - bh->outreq->short_not_ok = 1; start_transfer(fsg, fsg->bulk_out, bh->outreq, &bh->outreq_busy, &bh->state); @@ -2752,7 +2760,7 @@ static int do_set_interface(struct fsg_dev *fsg, int altsetting) reset: /* Deallocate the requests */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; if (bh->inreq) { @@ -2791,29 +2799,32 @@ reset: /* Enable the endpoints */ d = fsg_ep_desc(fsg->gadget, - &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc); + &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc, + &fsg_ss_bulk_in_desc); if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) goto reset; fsg->bulk_in_enabled = 1; d = fsg_ep_desc(fsg->gadget, - &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc); + &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc, + &fsg_ss_bulk_out_desc); if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) goto reset; fsg->bulk_out_enabled = 1; - fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); + fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); if (transport_is_cbi()) { d = fsg_ep_desc(fsg->gadget, - &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc); + &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc, + &fsg_ss_intr_in_desc); if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) goto reset; fsg->intr_in_enabled = 1; } /* Allocate the requests */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) @@ -2862,17 +2873,10 @@ static int do_set_config(struct fsg_dev *fsg, u8 new_config) fsg->config = new_config; if ((rc = do_set_interface(fsg, 0)) != 0) fsg->config = 0; // Reset on errors - else { - char *speed; - - switch (fsg->gadget->speed) { - case USB_SPEED_LOW: speed = "low"; break; - case USB_SPEED_FULL: speed = "full"; break; - case USB_SPEED_HIGH: speed = "high"; break; - default: speed = "?"; break; - } - INFO(fsg, "%s speed config #%d\n", speed, fsg->config); - } + else + INFO(fsg, "%s config #%d\n", + usb_speed_string(fsg->gadget->speed), + fsg->config); } return rc; } @@ -2909,7 +2913,7 @@ static void handle_exception(struct fsg_dev *fsg) /* Cancel all the pending transfers */ if (fsg->intreq_busy) usb_ep_dequeue(fsg->intr_in, fsg->intreq); - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &fsg->buffhds[i]; if (bh->inreq_busy) usb_ep_dequeue(fsg->bulk_in, bh->inreq); @@ -2920,7 +2924,7 @@ static void handle_exception(struct fsg_dev *fsg) /* Wait until everything is idle */ for (;;) { num_active = fsg->intreq_busy; - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &fsg->buffhds[i]; num_active += bh->inreq_busy + bh->outreq_busy; } @@ -2942,7 +2946,7 @@ static void handle_exception(struct fsg_dev *fsg) * state, and the exception. Then invoke the handler. */ spin_lock_irq(&fsg->lock); - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { bh = &fsg->buffhds[i]; bh->state = BUF_STATE_EMPTY; } @@ -3149,6 +3153,15 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) DBG(fsg, "unbind\n"); clear_bit(REGISTERED, &fsg->atomic_bitflags); + /* If the thread isn't already dead, tell it to exit now */ + if (fsg->state != FSG_STATE_TERMINATED) { + raise_exception(fsg, FSG_STATE_EXIT); + wait_for_completion(&fsg->thread_notifier); + + /* The cleanup routine waits for this completion also */ + complete(&fsg->thread_notifier); + } + /* Unregister the sysfs attribute files and the LUNs */ for (i = 0; i < fsg->nluns; ++i) { curlun = &fsg->luns[i]; @@ -3162,17 +3175,8 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) } } - /* If the thread isn't already dead, tell it to exit now */ - if (fsg->state != FSG_STATE_TERMINATED) { - raise_exception(fsg, FSG_STATE_EXIT); - wait_for_completion(&fsg->thread_notifier); - - /* The cleanup routine waits for this completion also */ - complete(&fsg->thread_notifier); - } - /* Free the data buffers */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) + for (i = 0; i < fsg_num_buffers; ++i) kfree(fsg->buffhds[i].buf); /* Free the request and buffer for endpoint 0 */ @@ -3445,6 +3449,24 @@ static int __init fsg_bind(struct usb_gadget *gadget) fsg_fs_intr_in_desc.bEndpointAddress; } + if (gadget_is_superspeed(gadget)) { + unsigned max_burst; + + fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL; + + /* Calculate bMaxBurst, we know packet size is 1024 */ + max_burst = min_t(unsigned, mod_data.buflen / 1024, 15); + + /* Assume endpoint addresses are the same for both speeds */ + fsg_ss_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; + + fsg_ss_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; + fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; + } + if (gadget_is_otg(gadget)) fsg_otg_desc.bmAttributes |= USB_OTG_HNP; @@ -3460,7 +3482,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) req->complete = ep0_complete; /* Allocate the data buffers */ - for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + for (i = 0; i < fsg_num_buffers; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; /* Allocate for the bulk-in endpoint. We assume that @@ -3471,7 +3493,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) goto out; bh->next = bh + 1; } - fsg->buffhds[FSG_NUM_BUFFERS - 1].next = &fsg->buffhds[0]; + fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0]; /* This should reflect the actual gadget power source */ usb_gadget_set_selfpowered(gadget); @@ -3561,11 +3583,7 @@ static void fsg_resume(struct usb_gadget *gadget) /*-------------------------------------------------------------------------*/ static struct usb_gadget_driver fsg_driver = { -#ifdef CONFIG_USB_GADGET_DUALSPEED - .speed = USB_SPEED_HIGH, -#else - .speed = USB_SPEED_FULL, -#endif + .speed = USB_SPEED_SUPER, .function = (char *) fsg_string_product, .unbind = fsg_unbind, .disconnect = fsg_disconnect, @@ -3587,7 +3605,9 @@ static int __init fsg_alloc(void) { struct fsg_dev *fsg; - fsg = kzalloc(sizeof *fsg, GFP_KERNEL); + fsg = kzalloc(sizeof *fsg + + fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL); + if (!fsg) return -ENOMEM; spin_lock_init(&fsg->lock); @@ -3605,6 +3625,10 @@ static int __init fsg_init(void) int rc; struct fsg_dev *fsg; + rc = fsg_num_buffers_validate(); + if (rc != 0) + return rc; + if ((rc = fsg_alloc()) != 0) return rc; fsg = the_fsg; diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 3bf872e1ad39..2a03e4de11c1 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -540,7 +540,7 @@ static int qe_ep_init(struct qe_udc *udc, int reval = 0; u16 max = 0; - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* check the max package size validate for this endpoint */ /* Refer to USB2.0 spec table 9-13, diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index de24a4233c25..b2c44e1d5813 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -559,7 +559,7 @@ static int fsl_ep_enable(struct usb_ep *_ep, if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* Disable automatic zlp generation. Driver is responsible to indicate * explicitly through req->req.zero. This is needed to enable multi-td @@ -1715,34 +1715,31 @@ static void dtd_complete_irq(struct fsl_udc *udc) } } +static inline enum usb_device_speed portscx_device_speed(u32 reg) +{ + switch (speed & PORTSCX_PORT_SPEED_MASK) { + case PORTSCX_PORT_SPEED_HIGH: + return USB_SPEED_HIGH; + case PORTSCX_PORT_SPEED_FULL: + return USB_SPEED_FULL; + case PORTSCX_PORT_SPEED_LOW: + return USB_SPEED_LOW; + default: + return USB_SPEED_UNKNOWN; + } +} + /* Process a port change interrupt */ static void port_change_irq(struct fsl_udc *udc) { - u32 speed; - if (udc->bus_reset) udc->bus_reset = 0; /* Bus resetting is finished */ - if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) { + if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) /* Get the speed */ - speed = (fsl_readl(&dr_regs->portsc1) - & PORTSCX_PORT_SPEED_MASK); - switch (speed) { - case PORTSCX_PORT_SPEED_HIGH: - udc->gadget.speed = USB_SPEED_HIGH; - break; - case PORTSCX_PORT_SPEED_FULL: - udc->gadget.speed = USB_SPEED_FULL; - break; - case PORTSCX_PORT_SPEED_LOW: - udc->gadget.speed = USB_SPEED_LOW; - break; - default: - udc->gadget.speed = USB_SPEED_UNKNOWN; - break; - } - } + udc->gadget.speed = + portscx_device_speed(fsl_readl(&dr_regs->portsc1)); /* Update USB state */ if (!udc->resume_state) @@ -2167,20 +2164,8 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, default: s = "None"; break; } - s;} ), ( { - char *s; - switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) { - case PORTSCX_PORT_SPEED_FULL: - s = "Full Speed"; break; - case PORTSCX_PORT_SPEED_LOW: - s = "Low Speed"; break; - case PORTSCX_PORT_SPEED_HIGH: - s = "High Speed"; break; - default: - s = "Undefined"; break; - } - s; - } ), + s;} ), + usb_speed_string(portscx_device_speed(tmp_reg)), (tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ? "Normal PHY mode" : "Low power mode", (tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" : diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 4ec888f90002..e593f2849fa9 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include <linux/dma-mapping.h> #include <linux/err.h> @@ -220,7 +210,7 @@ static int config_ep(struct fusb300_ep *ep, info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; - info.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(desc); info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; if ((info.type == USB_ENDPOINT_XFER_INT) || @@ -1479,7 +1469,7 @@ static int __init fusb300_probe(struct platform_device *pdev) fusb300->gadget.name = udc_name; fusb300->reg = reg; - ret = request_irq(ires->start, fusb300_irq, IRQF_DISABLED | IRQF_SHARED, + ret = request_irq(ires->start, fusb300_irq, IRQF_SHARED, udc_name, fusb300); if (ret < 0) { pr_err("request_irq error (%d)\n", ret); @@ -1487,7 +1477,7 @@ static int __init fusb300_probe(struct platform_device *pdev) } ret = request_irq(ires1->start, fusb300_irq, - IRQF_DISABLED | IRQF_SHARED, udc_name, fusb300); + IRQF_SHARED, udc_name, fusb300); if (ret < 0) { pr_err("request_irq1 error (%d)\n", ret); goto clean_up; diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h index f51aa2ef1f90..92745bd03064 100644 --- a/drivers/usb/gadget/fusb300_udc.h +++ b/drivers/usb/gadget/fusb300_udc.h @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index 704c2800ac00..0519d77915ec 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #define pr_fmt(fmt) "g_ffs: " fmt diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index f3a83cd0ef50..a8855d0b7f3b 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -31,6 +31,7 @@ #define gadget_is_ci13xxx_msm(g) (!strcmp("ci13xxx_msm", (g)->name)) #define gadget_is_ci13xxx_pci(g) (!strcmp("ci13xxx_pci", (g)->name)) #define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name)) +#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name)) #define gadget_is_fsl_qe(g) (!strcmp("fsl_qe_udc", (g)->name)) #define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name)) #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name)) @@ -115,6 +116,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x30; else if (gadget_is_net2272(gadget)) return 0x31; + else if (gadget_is_dwc3(gadget)) + return 0x32; return -ENOENT; } diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 8b9220e128a7..8fcde37aa6d4 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -36,134 +36,43 @@ #include "gadget_chips.h" - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ +#include "composite.c" #include "usbstring.c" #include "config.c" #include "epautoconf.c" +#include "f_midi.c" /*-------------------------------------------------------------------------*/ - MODULE_AUTHOR("Ben Williamson"); MODULE_LICENSE("GPL v2"); -#define DRIVER_VERSION "25 Jul 2006" - static const char shortname[] = "g_midi"; static const char longname[] = "MIDI Gadget"; static int index = SNDRV_DEFAULT_IDX1; -static char *id = SNDRV_DEFAULT_STR1; - -module_param(index, int, 0444); +module_param(index, int, S_IRUGO); MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter."); -module_param(id, charp, 0444); -MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter."); - -/* Some systems will want different product identifiers published in the - * device descriptor, either numbers or strings or both. These string - * parameters are in UTF-8 (superset of ASCII's 7 bit characters). - */ - -static ushort idVendor; -module_param(idVendor, ushort, S_IRUGO); -MODULE_PARM_DESC(idVendor, "USB Vendor ID"); - -static ushort idProduct; -module_param(idProduct, ushort, S_IRUGO); -MODULE_PARM_DESC(idProduct, "USB Product ID"); - -static ushort bcdDevice; -module_param(bcdDevice, ushort, S_IRUGO); -MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); - -static char *iManufacturer; -module_param(iManufacturer, charp, S_IRUGO); -MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); - -static char *iProduct; -module_param(iProduct, charp, S_IRUGO); -MODULE_PARM_DESC(iProduct, "USB Product string"); - -static char *iSerialNumber; -module_param(iSerialNumber, charp, S_IRUGO); -MODULE_PARM_DESC(iSerialNumber, "SerialNumber"); - -/* - * this version autoconfigures as much as possible, - * which is reasonable for most "bulk-only" drivers. - */ -static const char *EP_IN_NAME; -static const char *EP_OUT_NAME; +static char *id = SNDRV_DEFAULT_STR1; +module_param(id, charp, S_IRUGO); +MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter."); -/* big enough to hold our biggest descriptor */ -#define USB_BUFSIZ 256 - - -/* This is a gadget, and the IN/OUT naming is from the host's perspective. - USB -> OUT endpoint -> rawmidi - USB <- IN endpoint <- rawmidi */ -struct gmidi_in_port { - struct gmidi_device* dev; - int active; - uint8_t cable; /* cable number << 4 */ - uint8_t state; -#define STATE_UNKNOWN 0 -#define STATE_1PARAM 1 -#define STATE_2PARAM_1 2 -#define STATE_2PARAM_2 3 -#define STATE_SYSEX_0 4 -#define STATE_SYSEX_1 5 -#define STATE_SYSEX_2 6 - uint8_t data[2]; -}; - -struct gmidi_device { - spinlock_t lock; - struct usb_gadget *gadget; - struct usb_request *req; /* for control responses */ - u8 config; - struct usb_ep *in_ep, *out_ep; - struct snd_card *card; - struct snd_rawmidi *rmidi; - struct snd_rawmidi_substream *in_substream; - struct snd_rawmidi_substream *out_substream; - - /* For the moment we only support one port in - each direction, but in_port is kept as a - separate struct so we can have more later. */ - struct gmidi_in_port in_port; - unsigned long out_triggered; - struct tasklet_struct tasklet; -}; - -static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req); - - -#define DBG(d, fmt, args...) \ - dev_dbg(&(d)->gadget->dev , fmt , ## args) -#define VDBG(d, fmt, args...) \ - dev_vdbg(&(d)->gadget->dev , fmt , ## args) -#define ERROR(d, fmt, args...) \ - dev_err(&(d)->gadget->dev , fmt , ## args) -#define INFO(d, fmt, args...) \ - dev_info(&(d)->gadget->dev , fmt , ## args) - - -static unsigned buflen = 256; -static unsigned qlen = 32; - +static unsigned int buflen = 256; module_param(buflen, uint, S_IRUGO); +MODULE_PARM_DESC(buflen, "MIDI buffer length"); + +static unsigned int qlen = 32; module_param(qlen, uint, S_IRUGO); +MODULE_PARM_DESC(qlen, "USB read request queue length"); +static unsigned int in_ports = 1; +module_param(in_ports, uint, S_IRUGO); +MODULE_PARM_DESC(in_ports, "Number of MIDI input ports"); + +static unsigned int out_ports = 1; +module_param(out_ports, uint, S_IRUGO); +MODULE_PARM_DESC(out_ports, "Number of MIDI output ports"); /* Thanks to Grey Innovation for donating this product ID. * @@ -173,1149 +82,124 @@ module_param(qlen, uint, S_IRUGO); #define DRIVER_VENDOR_NUM 0x17b3 /* Grey Innovation */ #define DRIVER_PRODUCT_NUM 0x0004 /* Linux-USB "MIDI Gadget" */ +/* string IDs are assigned dynamically */ -/* - * DESCRIPTORS ... most are static, but strings and (full) - * configuration descriptors are built on demand. - */ - -#define STRING_MANUFACTURER 25 -#define STRING_PRODUCT 42 -#define STRING_SERIAL 101 -#define STRING_MIDI_GADGET 250 +#define STRING_MANUFACTURER_IDX 0 +#define STRING_PRODUCT_IDX 1 +#define STRING_DESCRIPTION_IDX 2 -/* We only have the one configuration, it's number 1. */ -#define GMIDI_CONFIG 1 - -/* We have two interfaces- AudioControl and MIDIStreaming */ -#define GMIDI_AC_INTERFACE 0 -#define GMIDI_MS_INTERFACE 1 -#define GMIDI_NUM_INTERFACES 2 - -DECLARE_UAC_AC_HEADER_DESCRIPTOR(1); -DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1); -DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1); - -/* B.1 Device Descriptor */ static struct usb_device_descriptor device_desc = { .bLength = USB_DT_DEVICE_SIZE, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = cpu_to_le16(0x0200), + .bcdUSB = __constant_cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_PER_INTERFACE, - .idVendor = cpu_to_le16(DRIVER_VENDOR_NUM), - .idProduct = cpu_to_le16(DRIVER_PRODUCT_NUM), - .iManufacturer = STRING_MANUFACTURER, - .iProduct = STRING_PRODUCT, + .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM), + .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM), + /* .iManufacturer = DYNAMIC */ + /* .iProduct = DYNAMIC */ .bNumConfigurations = 1, }; -/* B.2 Configuration Descriptor */ -static struct usb_config_descriptor config_desc = { - .bLength = USB_DT_CONFIG_SIZE, - .bDescriptorType = USB_DT_CONFIG, - /* compute wTotalLength on the fly */ - .bNumInterfaces = GMIDI_NUM_INTERFACES, - .bConfigurationValue = GMIDI_CONFIG, - .iConfiguration = STRING_MIDI_GADGET, - /* - * FIXME: When embedding this driver in a device, - * these need to be set to reflect the actual - * power properties of the device. Is it selfpowered? - */ - .bmAttributes = USB_CONFIG_ATT_ONE, - .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, -}; - -/* B.3.1 Standard AC Interface Descriptor */ -static const struct usb_interface_descriptor ac_interface_desc = { - .bLength = USB_DT_INTERFACE_SIZE, - .bDescriptorType = USB_DT_INTERFACE, - .bInterfaceNumber = GMIDI_AC_INTERFACE, - .bNumEndpoints = 0, - .bInterfaceClass = USB_CLASS_AUDIO, - .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, - .iInterface = STRING_MIDI_GADGET, -}; - -/* B.3.2 Class-Specific AC Interface Descriptor */ -static const struct uac1_ac_header_descriptor_1 ac_header_desc = { - .bLength = UAC_DT_AC_HEADER_SIZE(1), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_HEADER, - .bcdADC = cpu_to_le16(0x0100), - .wTotalLength = cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)), - .bInCollection = 1, - .baInterfaceNr = { - [0] = GMIDI_MS_INTERFACE, - } -}; - -/* B.4.1 Standard MS Interface Descriptor */ -static const struct usb_interface_descriptor ms_interface_desc = { - .bLength = USB_DT_INTERFACE_SIZE, - .bDescriptorType = USB_DT_INTERFACE, - .bInterfaceNumber = GMIDI_MS_INTERFACE, - .bNumEndpoints = 2, - .bInterfaceClass = USB_CLASS_AUDIO, - .bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING, - .iInterface = STRING_MIDI_GADGET, +static struct usb_string strings_dev[] = { + [STRING_MANUFACTURER_IDX].s = "Grey Innovation", + [STRING_PRODUCT_IDX].s = "MIDI Gadget", + [STRING_DESCRIPTION_IDX].s = "MIDI", + { } /* end of list */ }; -/* B.4.2 Class-Specific MS Interface Descriptor */ -static const struct usb_ms_header_descriptor ms_header_desc = { - .bLength = USB_DT_MS_HEADER_SIZE, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_HEADER, - .bcdMSC = cpu_to_le16(0x0100), - .wTotalLength = cpu_to_le16(USB_DT_MS_HEADER_SIZE - + 2*USB_DT_MIDI_IN_SIZE - + 2*USB_DT_MIDI_OUT_SIZE(1)), -}; - -#define JACK_IN_EMB 1 -#define JACK_IN_EXT 2 -#define JACK_OUT_EMB 3 -#define JACK_OUT_EXT 4 - -/* B.4.3 MIDI IN Jack Descriptors */ -static const struct usb_midi_in_jack_descriptor jack_in_emb_desc = { - .bLength = USB_DT_MIDI_IN_SIZE, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, - .bJackType = USB_MS_EMBEDDED, - .bJackID = JACK_IN_EMB, -}; - -static const struct usb_midi_in_jack_descriptor jack_in_ext_desc = { - .bLength = USB_DT_MIDI_IN_SIZE, - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_IN_JACK, - .bJackType = USB_MS_EXTERNAL, - .bJackID = JACK_IN_EXT, -}; - -/* B.4.4 MIDI OUT Jack Descriptors */ -static const struct usb_midi_out_jack_descriptor_1 jack_out_emb_desc = { - .bLength = USB_DT_MIDI_OUT_SIZE(1), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, - .bJackType = USB_MS_EMBEDDED, - .bJackID = JACK_OUT_EMB, - .bNrInputPins = 1, - .pins = { - [0] = { - .baSourceID = JACK_IN_EXT, - .baSourcePin = 1, - } - } -}; - -static const struct usb_midi_out_jack_descriptor_1 jack_out_ext_desc = { - .bLength = USB_DT_MIDI_OUT_SIZE(1), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubtype = USB_MS_MIDI_OUT_JACK, - .bJackType = USB_MS_EXTERNAL, - .bJackID = JACK_OUT_EXT, - .bNrInputPins = 1, - .pins = { - [0] = { - .baSourceID = JACK_IN_EMB, - .baSourcePin = 1, - } - } -}; - -/* B.5.1 Standard Bulk OUT Endpoint Descriptor */ -static struct usb_endpoint_descriptor bulk_out_desc = { - .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, -}; - -/* B.5.2 Class-specific MS Bulk OUT Endpoint Descriptor */ -static const struct usb_ms_endpoint_descriptor_1 ms_out_desc = { - .bLength = USB_DT_MS_ENDPOINT_SIZE(1), - .bDescriptorType = USB_DT_CS_ENDPOINT, - .bDescriptorSubtype = USB_MS_GENERAL, - .bNumEmbMIDIJack = 1, - .baAssocJackID = { - [0] = JACK_IN_EMB, - } -}; - -/* B.6.1 Standard Bulk IN Endpoint Descriptor */ -static struct usb_endpoint_descriptor bulk_in_desc = { - .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_BULK, -}; - -/* B.6.2 Class-specific MS Bulk IN Endpoint Descriptor */ -static const struct usb_ms_endpoint_descriptor_1 ms_in_desc = { - .bLength = USB_DT_MS_ENDPOINT_SIZE(1), - .bDescriptorType = USB_DT_CS_ENDPOINT, - .bDescriptorSubtype = USB_MS_GENERAL, - .bNumEmbMIDIJack = 1, - .baAssocJackID = { - [0] = JACK_OUT_EMB, - } -}; - -static const struct usb_descriptor_header *gmidi_function [] = { - (struct usb_descriptor_header *)&ac_interface_desc, - (struct usb_descriptor_header *)&ac_header_desc, - (struct usb_descriptor_header *)&ms_interface_desc, - - (struct usb_descriptor_header *)&ms_header_desc, - (struct usb_descriptor_header *)&jack_in_emb_desc, - (struct usb_descriptor_header *)&jack_in_ext_desc, - (struct usb_descriptor_header *)&jack_out_emb_desc, - (struct usb_descriptor_header *)&jack_out_ext_desc, - /* If you add more jacks, update ms_header_desc.wTotalLength */ - - (struct usb_descriptor_header *)&bulk_out_desc, - (struct usb_descriptor_header *)&ms_out_desc, - (struct usb_descriptor_header *)&bulk_in_desc, - (struct usb_descriptor_header *)&ms_in_desc, - NULL, -}; - -static char manufacturer[50]; -static char product_desc[40] = "MIDI Gadget"; -static char serial_number[20]; - -/* static strings, in UTF-8 */ -static struct usb_string strings [] = { - { STRING_MANUFACTURER, manufacturer, }, - { STRING_PRODUCT, product_desc, }, - { STRING_SERIAL, serial_number, }, - { STRING_MIDI_GADGET, longname, }, - { } /* end of list */ -}; - -static struct usb_gadget_strings stringtab = { +static struct usb_gadget_strings stringtab_dev = { .language = 0x0409, /* en-us */ - .strings = strings, + .strings = strings_dev, }; -static int config_buf(struct usb_gadget *gadget, - u8 *buf, u8 type, unsigned index) -{ - int len; - - /* only one configuration */ - if (index != 0) { - return -EINVAL; - } - len = usb_gadget_config_buf(&config_desc, - buf, USB_BUFSIZ, gmidi_function); - if (len < 0) { - return len; - } - ((struct usb_config_descriptor *)buf)->bDescriptorType = type; - return len; -} - -static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length) -{ - struct usb_request *req; - - req = usb_ep_alloc_request(ep, GFP_ATOMIC); - if (req) { - req->length = length; - req->buf = kmalloc(length, GFP_ATOMIC); - if (!req->buf) { - usb_ep_free_request(ep, req); - req = NULL; - } - } - return req; -} - -static void free_ep_req(struct usb_ep *ep, struct usb_request *req) -{ - kfree(req->buf); - usb_ep_free_request(ep, req); -} - -static const uint8_t gmidi_cin_length[] = { - 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1 +static struct usb_gadget_strings *dev_strings[] = { + &stringtab_dev, + NULL, }; -/* - * Receives a chunk of MIDI data. - */ -static void gmidi_read_data(struct usb_ep *ep, int cable, - uint8_t *data, int length) -{ - struct gmidi_device *dev = ep->driver_data; - /* cable is ignored, because for now we only have one. */ - - if (!dev->out_substream) { - /* Nobody is listening - throw it on the floor. */ - return; - } - if (!test_bit(dev->out_substream->number, &dev->out_triggered)) { - return; - } - snd_rawmidi_receive(dev->out_substream, data, length); -} - -static void gmidi_handle_out_data(struct usb_ep *ep, struct usb_request *req) -{ - unsigned i; - u8 *buf = req->buf; - - for (i = 0; i + 3 < req->actual; i += 4) { - if (buf[i] != 0) { - int cable = buf[i] >> 4; - int length = gmidi_cin_length[buf[i] & 0x0f]; - gmidi_read_data(ep, cable, &buf[i + 1], length); - } - } -} - -static void gmidi_complete(struct usb_ep *ep, struct usb_request *req) -{ - struct gmidi_device *dev = ep->driver_data; - int status = req->status; - - switch (status) { - case 0: /* normal completion */ - if (ep == dev->out_ep) { - /* we received stuff. - req is queued again, below */ - gmidi_handle_out_data(ep, req); - } else if (ep == dev->in_ep) { - /* our transmit completed. - see if there's more to go. - gmidi_transmit eats req, don't queue it again. */ - gmidi_transmit(dev, req); - return; - } - break; - - /* this endpoint is normally active while we're configured */ - case -ECONNABORTED: /* hardware forced ep reset */ - case -ECONNRESET: /* request dequeued */ - case -ESHUTDOWN: /* disconnect from host */ - VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status, - req->actual, req->length); - if (ep == dev->out_ep) { - gmidi_handle_out_data(ep, req); - } - free_ep_req(ep, req); - return; - - case -EOVERFLOW: /* buffer overrun on read means that - * we didn't provide a big enough - * buffer. - */ - default: - DBG(dev, "%s complete --> %d, %d/%d\n", ep->name, - status, req->actual, req->length); - break; - case -EREMOTEIO: /* short read */ - break; - } - - status = usb_ep_queue(ep, req, GFP_ATOMIC); - if (status) { - ERROR(dev, "kill %s: resubmit %d bytes --> %d\n", - ep->name, req->length, status); - usb_ep_set_halt(ep); - /* FIXME recover later ... somehow */ - } -} - -static int set_gmidi_config(struct gmidi_device *dev, gfp_t gfp_flags) -{ - int err = 0; - struct usb_request *req; - struct usb_ep *ep; - unsigned i; - - dev->in_ep->desc = &bulk_in_desc; - err = usb_ep_enable(dev->in_ep); - if (err) { - ERROR(dev, "can't start %s: %d\n", dev->in_ep->name, err); - goto fail; - } - dev->in_ep->driver_data = dev; - - dev->out_ep->desc = &bulk_out_desc; - err = usb_ep_enable(dev->out_ep); - if (err) { - ERROR(dev, "can't start %s: %d\n", dev->out_ep->name, err); - goto fail; - } - dev->out_ep->driver_data = dev; - - /* allocate a bunch of read buffers and queue them all at once. */ - ep = dev->out_ep; - for (i = 0; i < qlen && err == 0; i++) { - req = alloc_ep_req(ep, buflen); - if (req) { - req->complete = gmidi_complete; - err = usb_ep_queue(ep, req, GFP_ATOMIC); - if (err) { - DBG(dev, "%s queue req: %d\n", ep->name, err); - } - } else { - err = -ENOMEM; - } - } -fail: - /* caller is responsible for cleanup on error */ - return err; -} - - -static void gmidi_reset_config(struct gmidi_device *dev) -{ - if (dev->config == 0) { - return; - } - - DBG(dev, "reset config\n"); - - /* just disable endpoints, forcing completion of pending i/o. - * all our completion handlers free their requests in this case. - */ - usb_ep_disable(dev->in_ep); - usb_ep_disable(dev->out_ep); - dev->config = 0; -} - -/* change our operational config. this code must agree with the code - * that returns config descriptors, and altsetting code. - * - * it's also responsible for power management interactions. some - * configurations might not work with our current power sources. - * - * note that some device controller hardware will constrain what this - * code can do, perhaps by disallowing more than one configuration or - * by limiting configuration choices (like the pxa2xx). - */ -static int -gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags) -{ - int result = 0; - struct usb_gadget *gadget = dev->gadget; - -#if 0 - /* FIXME */ - /* Hacking this bit out fixes a bug where on receipt of two - USB_REQ_SET_CONFIGURATION messages, we end up with no - buffered OUT requests waiting for data. This is clearly - hiding a bug elsewhere, because if the config didn't - change then we really shouldn't do anything. */ - /* Having said that, when we do "change" from config 1 - to config 1, we at least gmidi_reset_config() which - clears out any requests on endpoints, so it's not like - we leak or anything. */ - if (number == dev->config) { - return 0; - } -#endif - - gmidi_reset_config(dev); - - switch (number) { - case GMIDI_CONFIG: - result = set_gmidi_config(dev, gfp_flags); - break; - default: - result = -EINVAL; - /* FALL THROUGH */ - case 0: - return result; - } - - if (!result && (!dev->in_ep || !dev->out_ep)) { - result = -ENODEV; - } - if (result) { - gmidi_reset_config(dev); - } else { - char *speed; - - switch (gadget->speed) { - case USB_SPEED_LOW: speed = "low"; break; - case USB_SPEED_FULL: speed = "full"; break; - case USB_SPEED_HIGH: speed = "high"; break; - default: speed = "?"; break; - } - - dev->config = number; - INFO(dev, "%s speed\n", speed); - } - return result; -} - - -static void gmidi_setup_complete(struct usb_ep *ep, struct usb_request *req) -{ - if (req->status || req->actual != req->length) { - DBG((struct gmidi_device *) ep->driver_data, - "setup complete --> %d, %d/%d\n", - req->status, req->actual, req->length); - } -} - -/* - * The setup() callback implements all the ep0 functionality that's - * not handled lower down, in hardware or the hardware driver (like - * device and endpoint feature flags, and their status). It's all - * housekeeping for the gadget function we're implementing. Most of - * the work is in config-specific setup. - */ -static int gmidi_setup(struct usb_gadget *gadget, - const struct usb_ctrlrequest *ctrl) -{ - struct gmidi_device *dev = get_gadget_data(gadget); - struct usb_request *req = dev->req; - int value = -EOPNOTSUPP; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u16 w_value = le16_to_cpu(ctrl->wValue); - u16 w_length = le16_to_cpu(ctrl->wLength); - - /* usually this stores reply data in the pre-allocated ep0 buffer, - * but config change events will reconfigure hardware. - */ - req->zero = 0; - switch (ctrl->bRequest) { - - case USB_REQ_GET_DESCRIPTOR: - if (ctrl->bRequestType != USB_DIR_IN) { - goto unknown; - } - switch (w_value >> 8) { - - case USB_DT_DEVICE: - device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; - value = min(w_length, (u16) sizeof(device_desc)); - memcpy(req->buf, &device_desc, value); - break; - case USB_DT_CONFIG: - value = config_buf(gadget, req->buf, - w_value >> 8, - w_value & 0xff); - if (value >= 0) { - value = min(w_length, (u16)value); - } - break; - - case USB_DT_STRING: - /* wIndex == language code. - * this driver only handles one language, you can - * add string tables for other languages, using - * any UTF-8 characters - */ - value = usb_gadget_get_string(&stringtab, - w_value & 0xff, req->buf); - if (value >= 0) { - value = min(w_length, (u16)value); - } - break; - } - break; - - /* currently two configs, two speeds */ - case USB_REQ_SET_CONFIGURATION: - if (ctrl->bRequestType != 0) { - goto unknown; - } - if (gadget->a_hnp_support) { - DBG(dev, "HNP available\n"); - } else if (gadget->a_alt_hnp_support) { - DBG(dev, "HNP needs a different root port\n"); - } else { - VDBG(dev, "HNP inactive\n"); - } - spin_lock(&dev->lock); - value = gmidi_set_config(dev, w_value, GFP_ATOMIC); - spin_unlock(&dev->lock); - break; - case USB_REQ_GET_CONFIGURATION: - if (ctrl->bRequestType != USB_DIR_IN) { - goto unknown; - } - *(u8 *)req->buf = dev->config; - value = min(w_length, (u16)1); - break; - - /* until we add altsetting support, or other interfaces, - * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) - * and already killed pending endpoint I/O. - */ - case USB_REQ_SET_INTERFACE: - if (ctrl->bRequestType != USB_RECIP_INTERFACE) { - goto unknown; - } - spin_lock(&dev->lock); - if (dev->config && w_index < GMIDI_NUM_INTERFACES - && w_value == 0) - { - u8 config = dev->config; - - /* resets interface configuration, forgets about - * previous transaction state (queued bufs, etc) - * and re-inits endpoint state (toggle etc) - * no response queued, just zero status == success. - * if we had more than one interface we couldn't - * use this "reset the config" shortcut. - */ - gmidi_reset_config(dev); - gmidi_set_config(dev, config, GFP_ATOMIC); - value = 0; - } - spin_unlock(&dev->lock); - break; - case USB_REQ_GET_INTERFACE: - if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) { - goto unknown; - } - if (!dev->config) { - break; - } - if (w_index >= GMIDI_NUM_INTERFACES) { - value = -EDOM; - break; - } - *(u8 *)req->buf = 0; - value = min(w_length, (u16)1); - break; - - default: -unknown: - VDBG(dev, "unknown control req%02x.%02x v%04x i%04x l%d\n", - ctrl->bRequestType, ctrl->bRequest, - w_value, w_index, w_length); - } - - /* respond with data transfer before status phase? */ - if (value >= 0) { - req->length = value; - req->zero = value < w_length; - value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); - if (value < 0) { - DBG(dev, "ep_queue --> %d\n", value); - req->status = 0; - gmidi_setup_complete(gadget->ep0, req); - } - } - - /* device either stalls (value < 0) or reports success */ - return value; -} - -static void gmidi_disconnect(struct usb_gadget *gadget) -{ - struct gmidi_device *dev = get_gadget_data(gadget); - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - gmidi_reset_config(dev); - - /* a more significant application might have some non-usb - * activities to quiesce here, saving resources like power - * or pushing the notification up a network stack. - */ - spin_unlock_irqrestore(&dev->lock, flags); - - /* next we may get setup() calls to enumerate new connections; - * or an unbind() during shutdown (including removing module). - */ -} - -static void /* __init_or_exit */ gmidi_unbind(struct usb_gadget *gadget) -{ - struct gmidi_device *dev = get_gadget_data(gadget); - struct snd_card *card; - - DBG(dev, "unbind\n"); - - card = dev->card; - dev->card = NULL; - if (card) { - snd_card_free(card); - } - - /* we've already been disconnected ... no i/o is active */ - if (dev->req) { - dev->req->length = USB_BUFSIZ; - free_ep_req(gadget->ep0, dev->req); - } - kfree(dev); - set_gadget_data(gadget, NULL); -} - -static int gmidi_snd_free(struct snd_device *device) +static int __exit midi_unbind(struct usb_composite_dev *dev) { return 0; } -static void gmidi_transmit_packet(struct usb_request *req, uint8_t p0, - uint8_t p1, uint8_t p2, uint8_t p3) -{ - unsigned length = req->length; - u8 *buf = (u8 *)req->buf + length; - - buf[0] = p0; - buf[1] = p1; - buf[2] = p2; - buf[3] = p3; - req->length = length + 4; -} - -/* - * Converts MIDI commands to USB MIDI packets. - */ -static void gmidi_transmit_byte(struct usb_request *req, - struct gmidi_in_port *port, uint8_t b) -{ - uint8_t p0 = port->cable; - - if (b >= 0xf8) { - gmidi_transmit_packet(req, p0 | 0x0f, b, 0, 0); - } else if (b >= 0xf0) { - switch (b) { - case 0xf0: - port->data[0] = b; - port->state = STATE_SYSEX_1; - break; - case 0xf1: - case 0xf3: - port->data[0] = b; - port->state = STATE_1PARAM; - break; - case 0xf2: - port->data[0] = b; - port->state = STATE_2PARAM_1; - break; - case 0xf4: - case 0xf5: - port->state = STATE_UNKNOWN; - break; - case 0xf6: - gmidi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0); - port->state = STATE_UNKNOWN; - break; - case 0xf7: - switch (port->state) { - case STATE_SYSEX_0: - gmidi_transmit_packet(req, - p0 | 0x05, 0xf7, 0, 0); - break; - case STATE_SYSEX_1: - gmidi_transmit_packet(req, - p0 | 0x06, port->data[0], 0xf7, 0); - break; - case STATE_SYSEX_2: - gmidi_transmit_packet(req, - p0 | 0x07, port->data[0], - port->data[1], 0xf7); - break; - } - port->state = STATE_UNKNOWN; - break; - } - } else if (b >= 0x80) { - port->data[0] = b; - if (b >= 0xc0 && b <= 0xdf) - port->state = STATE_1PARAM; - else - port->state = STATE_2PARAM_1; - } else { /* b < 0x80 */ - switch (port->state) { - case STATE_1PARAM: - if (port->data[0] < 0xf0) { - p0 |= port->data[0] >> 4; - } else { - p0 |= 0x02; - port->state = STATE_UNKNOWN; - } - gmidi_transmit_packet(req, p0, port->data[0], b, 0); - break; - case STATE_2PARAM_1: - port->data[1] = b; - port->state = STATE_2PARAM_2; - break; - case STATE_2PARAM_2: - if (port->data[0] < 0xf0) { - p0 |= port->data[0] >> 4; - port->state = STATE_2PARAM_1; - } else { - p0 |= 0x03; - port->state = STATE_UNKNOWN; - } - gmidi_transmit_packet(req, - p0, port->data[0], port->data[1], b); - break; - case STATE_SYSEX_0: - port->data[0] = b; - port->state = STATE_SYSEX_1; - break; - case STATE_SYSEX_1: - port->data[1] = b; - port->state = STATE_SYSEX_2; - break; - case STATE_SYSEX_2: - gmidi_transmit_packet(req, - p0 | 0x04, port->data[0], port->data[1], b); - port->state = STATE_SYSEX_0; - break; - } - } -} - -static void gmidi_transmit(struct gmidi_device *dev, struct usb_request *req) -{ - struct usb_ep *ep = dev->in_ep; - struct gmidi_in_port *port = &dev->in_port; - - if (!ep) { - return; - } - if (!req) { - req = alloc_ep_req(ep, buflen); - } - if (!req) { - ERROR(dev, "gmidi_transmit: alloc_ep_request failed\n"); - return; - } - req->length = 0; - req->complete = gmidi_complete; - - if (port->active) { - while (req->length + 3 < buflen) { - uint8_t b; - if (snd_rawmidi_transmit(dev->in_substream, &b, 1) - != 1) - { - port->active = 0; - break; - } - gmidi_transmit_byte(req, port, b); - } - } - if (req->length > 0) { - usb_ep_queue(ep, req, GFP_ATOMIC); - } else { - free_ep_req(ep, req); - } -} - -static void gmidi_in_tasklet(unsigned long data) -{ - struct gmidi_device *dev = (struct gmidi_device *)data; - - gmidi_transmit(dev, NULL); -} - -static int gmidi_in_open(struct snd_rawmidi_substream *substream) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_in_open\n"); - dev->in_substream = substream; - dev->in_port.state = STATE_UNKNOWN; - return 0; -} - -static int gmidi_in_close(struct snd_rawmidi_substream *substream) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_in_close\n"); - return 0; -} - -static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_in_trigger %d\n", up); - dev->in_port.active = up; - if (up) { - tasklet_hi_schedule(&dev->tasklet); - } -} - -static int gmidi_out_open(struct snd_rawmidi_substream *substream) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_out_open\n"); - dev->out_substream = substream; - return 0; -} - -static int gmidi_out_close(struct snd_rawmidi_substream *substream) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_out_close\n"); - return 0; -} - -static void gmidi_out_trigger(struct snd_rawmidi_substream *substream, int up) -{ - struct gmidi_device *dev = substream->rmidi->private_data; - - VDBG(dev, "gmidi_out_trigger %d\n", up); - if (up) { - set_bit(substream->number, &dev->out_triggered); - } else { - clear_bit(substream->number, &dev->out_triggered); - } -} - -static struct snd_rawmidi_ops gmidi_in_ops = { - .open = gmidi_in_open, - .close = gmidi_in_close, - .trigger = gmidi_in_trigger, +static struct usb_configuration midi_config = { + .label = "MIDI Gadget", + .bConfigurationValue = 1, + /* .iConfiguration = DYNAMIC */ + .bmAttributes = USB_CONFIG_ATT_ONE, + .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, }; -static struct snd_rawmidi_ops gmidi_out_ops = { - .open = gmidi_out_open, - .close = gmidi_out_close, - .trigger = gmidi_out_trigger -}; - -/* register as a sound "card" */ -static int gmidi_register_card(struct gmidi_device *dev) +static int __init midi_bind_config(struct usb_configuration *c) { - struct snd_card *card; - struct snd_rawmidi *rmidi; - int err; - int out_ports = 1; - int in_ports = 1; - static struct snd_device_ops ops = { - .dev_free = gmidi_snd_free, - }; - - err = snd_card_create(index, id, THIS_MODULE, 0, &card); - if (err < 0) { - ERROR(dev, "snd_card_create failed\n"); - goto fail; - } - dev->card = card; - - err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, dev, &ops); - if (err < 0) { - ERROR(dev, "snd_device_new failed: error %d\n", err); - goto fail; - } - - strcpy(card->driver, longname); - strcpy(card->longname, longname); - strcpy(card->shortname, shortname); - - /* Set up rawmidi */ - dev->in_port.dev = dev; - dev->in_port.active = 0; - snd_component_add(card, "MIDI"); - err = snd_rawmidi_new(card, "USB MIDI Gadget", 0, - out_ports, in_ports, &rmidi); - if (err < 0) { - ERROR(dev, "snd_rawmidi_new failed: error %d\n", err); - goto fail; - } - dev->rmidi = rmidi; - strcpy(rmidi->name, card->shortname); - rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | - SNDRV_RAWMIDI_INFO_INPUT | - SNDRV_RAWMIDI_INFO_DUPLEX; - rmidi->private_data = dev; - - /* Yes, rawmidi OUTPUT = USB IN, and rawmidi INPUT = USB OUT. - It's an upside-down world being a gadget. */ - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, &gmidi_in_ops); - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, &gmidi_out_ops); - - snd_card_set_dev(card, &dev->gadget->dev); - - /* register it - we're ready to go */ - err = snd_card_register(card); - if (err < 0) { - ERROR(dev, "snd_card_register failed\n"); - goto fail; - } - - VDBG(dev, "gmidi_register_card finished ok\n"); - return 0; - -fail: - if (dev->card) { - snd_card_free(dev->card); - dev->card = NULL; - } - return err; + return f_midi_bind_config(c, index, id, + in_ports, out_ports, + buflen, qlen); } -/* - * Creates an output endpoint, and initializes output ports. - */ -static int __init gmidi_bind(struct usb_gadget *gadget) +static int __init midi_bind(struct usb_composite_dev *cdev) { - struct gmidi_device *dev; - struct usb_ep *in_ep, *out_ep; - int gcnum, err = 0; + struct usb_gadget *gadget = cdev->gadget; + int gcnum, status; - /* support optional vendor/distro customization */ - if (idVendor) { - if (!idProduct) { - pr_err("idVendor needs idProduct!\n"); - return -ENODEV; - } - device_desc.idVendor = cpu_to_le16(idVendor); - device_desc.idProduct = cpu_to_le16(idProduct); - if (bcdDevice) { - device_desc.bcdDevice = cpu_to_le16(bcdDevice); - } - } - if (iManufacturer) { - strlcpy(manufacturer, iManufacturer, sizeof(manufacturer)); - } else { - snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", - init_utsname()->sysname, init_utsname()->release, - gadget->name); - } - if (iProduct) { - strlcpy(product_desc, iProduct, sizeof(product_desc)); - } - if (iSerialNumber) { - device_desc.iSerialNumber = STRING_SERIAL, - strlcpy(serial_number, iSerialNumber, sizeof(serial_number)); - } + status = usb_string_id(cdev); + if (status < 0) + return status; + strings_dev[STRING_MANUFACTURER_IDX].id = status; + device_desc.iManufacturer = status; - /* Bulk-only drivers like this one SHOULD be able to - * autoconfigure on any sane usb controller driver, - * but there may also be important quirks to address. - */ - usb_ep_autoconfig_reset(gadget); - in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc); - if (!in_ep) { -autoconf_fail: - pr_err("%s: can't autoconfigure on %s\n", - shortname, gadget->name); - return -ENODEV; - } - EP_IN_NAME = in_ep->name; - in_ep->driver_data = in_ep; /* claim */ + status = usb_string_id(cdev); + if (status < 0) + return status; + strings_dev[STRING_PRODUCT_IDX].id = status; + device_desc.iProduct = status; - out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc); - if (!out_ep) { - goto autoconf_fail; - } - EP_OUT_NAME = out_ep->name; - out_ep->driver_data = out_ep; /* claim */ + /* config description */ + status = usb_string_id(cdev); + if (status < 0) + return status; + strings_dev[STRING_DESCRIPTION_IDX].id = status; + + midi_config.iConfiguration = status; gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) { - device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); - } else { + if (gcnum < 0) { /* gmidi is so simple (no altsettings) that * it SHOULD NOT have problems with bulk-capable hardware. * so warn about unrecognized controllers, don't panic. */ pr_warning("%s: controller '%s' not recognized\n", - shortname, gadget->name); + __func__, gadget->name); device_desc.bcdDevice = cpu_to_le16(0x9999); + } else { + device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); } + status = usb_add_config(cdev, &midi_config, midi_bind_config); + if (status < 0) + return status; - /* ok, we made sense of the hardware ... */ - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - return -ENOMEM; - } - spin_lock_init(&dev->lock); - dev->gadget = gadget; - dev->in_ep = in_ep; - dev->out_ep = out_ep; - set_gadget_data(gadget, dev); - tasklet_init(&dev->tasklet, gmidi_in_tasklet, (unsigned long)dev); - - /* preallocate control response and buffer */ - dev->req = alloc_ep_req(gadget->ep0, USB_BUFSIZ); - if (!dev->req) { - err = -ENOMEM; - goto fail; - } - - dev->req->complete = gmidi_setup_complete; - - gadget->ep0->driver_data = dev; - - INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname); - INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, - EP_OUT_NAME, EP_IN_NAME); - - /* register as an ALSA sound card */ - err = gmidi_register_card(dev); - if (err < 0) { - goto fail; - } - - VDBG(dev, "gmidi_bind finished ok\n"); + pr_info("%s\n", longname); return 0; - -fail: - gmidi_unbind(gadget); - return err; -} - - -static void gmidi_suspend(struct usb_gadget *gadget) -{ - struct gmidi_device *dev = get_gadget_data(gadget); - - if (gadget->speed == USB_SPEED_UNKNOWN) { - return; - } - - DBG(dev, "suspend\n"); -} - -static void gmidi_resume(struct usb_gadget *gadget) -{ - struct gmidi_device *dev = get_gadget_data(gadget); - - DBG(dev, "resume\n"); } - -static struct usb_gadget_driver gmidi_driver = { - .speed = USB_SPEED_FULL, - .function = (char *)longname, - .unbind = gmidi_unbind, - - .setup = gmidi_setup, - .disconnect = gmidi_disconnect, - - .suspend = gmidi_suspend, - .resume = gmidi_resume, - - .driver = { - .name = (char *)shortname, - .owner = THIS_MODULE, - }, +static struct usb_composite_driver midi_driver = { + .name = (char *) longname, + .dev = &device_desc, + .strings = dev_strings, + .max_speed = USB_SPEED_HIGH, + .unbind = __exit_p(midi_unbind), }; -static int __init gmidi_init(void) +static int __init midi_init(void) { - return usb_gadget_probe_driver(&gmidi_driver, gmidi_bind); + return usb_composite_probe(&midi_driver, midi_bind); } -module_init(gmidi_init); +module_init(midi_init); -static void __exit gmidi_cleanup(void) +static void __exit midi_cleanup(void) { - usb_gadget_unregister_driver(&gmidi_driver); + usb_composite_unregister(&midi_driver); } -module_exit(gmidi_cleanup); +module_exit(midi_cleanup); diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c index 9fb575034a0e..f888c3ede860 100644 --- a/drivers/usb/gadget/hid.c +++ b/drivers/usb/gadget/hid.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 692fd9b2248b..2d978c0e7ced 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -689,7 +689,7 @@ static int imx_ep_enable(struct usb_ep *usb_ep, return -EINVAL; } - if (imx_ep->fifosize < le16_to_cpu(desc->wMaxPacketSize)) { + if (imx_ep->fifosize < usb_endpoint_maxp(desc)) { D_ERR(imx_usb->dev, "<%s> bad %s maxpacket\n", __func__, usb_ep->name); return -ERANGE; @@ -1478,7 +1478,7 @@ static int __init imx_udc_probe(struct platform_device *pdev) for (i = 0; i < IMX_USB_NB_EP + 1; i++) { ret = request_irq(imx_usb->usbd_int[i], intr_handler(i), - IRQF_DISABLED, driver_name, imx_usb); + 0, driver_name, imx_usb); if (ret) { dev_err(&pdev->dev, "can't get irq %i, err %d\n", imx_usb->usbd_int[i], ret); diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h index 7136c242b4ec..d118fb777840 100644 --- a/drivers/usb/gadget/imx_udc.h +++ b/drivers/usb/gadget/imx_udc.h @@ -8,11 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __LINUX_USB_GADGET_IMX_H diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 1b240990448f..a392ec0d2d51 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index a06e2c27b435..c9fa3bf5b377 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -5,16 +5,6 @@ * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ @@ -60,9 +50,6 @@ static const char driver_name[] = "langwell_udc"; static const char driver_desc[] = DRIVER_DESC; -/* controller device global variable */ -static struct langwell_udc *the_controller; - /* for endpoint 0 operations */ static const struct usb_endpoint_descriptor langwell_ep0_desc = { @@ -283,7 +270,7 @@ static int langwell_ep_enable(struct usb_ep *_ep, if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* * disable HW zero length termination select @@ -1321,9 +1308,12 @@ static int langwell_pullup(struct usb_gadget *_gadget, int is_on) return 0; } -static int langwell_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int langwell_stop(struct usb_gadget_driver *driver); +static int langwell_start(struct usb_gadget *g, + struct usb_gadget_driver *driver); + +static int langwell_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver); + /* device controller usb_gadget_ops structure */ static const struct usb_gadget_ops langwell_ops = { @@ -1345,8 +1335,8 @@ static const struct usb_gadget_ops langwell_ops = { /* D+ pullup, software-controlled connect/disconnect to USB host */ .pullup = langwell_pullup, - .start = langwell_start, - .stop = langwell_stop, + .udc_start = langwell_start, + .udc_stop = langwell_stop, }; @@ -1561,7 +1551,7 @@ static void stop_activity(struct langwell_udc *dev, static ssize_t show_function(struct device *_dev, struct device_attribute *attr, char *buf) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = dev_get_drvdata(_dev); if (!dev->driver || !dev->driver->function || strlen(dev->driver->function) > PAGE_SIZE) @@ -1572,11 +1562,25 @@ static ssize_t show_function(struct device *_dev, static DEVICE_ATTR(function, S_IRUGO, show_function, NULL); +static inline enum usb_device_speed lpm_device_speed(u32 reg) +{ + switch (LPM_PSPD(reg)) { + case LPM_SPEED_HIGH: + return USB_SPEED_HIGH; + case LPM_SPEED_FULL: + return USB_SPEED_FULL; + case LPM_SPEED_LOW: + return USB_SPEED_LOW; + default: + return USB_SPEED_UNKNOWN; + } +} + /* device "langwell_udc" sysfs attribute file */ static ssize_t show_langwell_udc(struct device *_dev, struct device_attribute *attr, char *buf) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = dev_get_drvdata(_dev); struct langwell_request *req; struct langwell_ep *ep = NULL; char *next; @@ -1700,20 +1704,7 @@ static ssize_t show_langwell_udc(struct device *_dev, "BmAttributes: %d\n\n", LPM_PTS(tmp_reg), (tmp_reg & LPM_STS) ? 1 : 0, - ({ - char *s; - switch (LPM_PSPD(tmp_reg)) { - case LPM_SPEED_FULL: - s = "Full Speed"; break; - case LPM_SPEED_LOW: - s = "Low Speed"; break; - case LPM_SPEED_HIGH: - s = "High Speed"; break; - default: - s = "Unknown Speed"; break; - } - s; - }), + usb_speed_string(lpm_device_speed(tmp_reg)), (tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force", (tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled", LPM_BA(tmp_reg)); @@ -1821,7 +1812,7 @@ static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL); static ssize_t store_remote_wakeup(struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = dev_get_drvdata(_dev); unsigned long flags; ssize_t rc = count; @@ -1857,21 +1848,15 @@ static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup); * the driver might get unbound. */ -static int langwell_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int langwell_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = gadget_to_langwell(g); unsigned long flags; int retval; - if (!dev) - return -ENODEV; - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (dev->driver) - return -EBUSY; - spin_lock_irqsave(&dev->lock, flags); /* hook up the driver ... */ @@ -1881,18 +1866,9 @@ static int langwell_start(struct usb_gadget_driver *driver, spin_unlock_irqrestore(&dev->lock, flags); - retval = bind(&dev->gadget); - if (retval) { - dev_dbg(&dev->pdev->dev, "bind to driver %s --> %d\n", - driver->driver.name, retval); - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; - } - retval = device_create_file(&dev->pdev->dev, &dev_attr_function); if (retval) - goto err_unbind; + goto err; dev->usb_state = USB_STATE_ATTACHED; dev->ep0_state = WAIT_FOR_SETUP; @@ -1909,31 +1885,27 @@ static int langwell_start(struct usb_gadget_driver *driver, dev_info(&dev->pdev->dev, "register driver: %s\n", driver->driver.name); dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); + return 0; -err_unbind: - driver->unbind(&dev->gadget); +err: dev->gadget.dev.driver = NULL; dev->driver = NULL; dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); + return retval; } /* unregister gadget driver */ -static int langwell_stop(struct usb_gadget_driver *driver) +static int langwell_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = gadget_to_langwell(g); unsigned long flags; - if (!dev) - return -ENODEV; - dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); - if (unlikely(!driver || !driver->unbind)) - return -EINVAL; - /* exit PHY low power suspend */ if (dev->pdev->device != 0x0829) langwell_phy_low_power(dev, 0); @@ -1956,8 +1928,6 @@ static int langwell_stop(struct usb_gadget_driver *driver) stop_activity(dev, driver); spin_unlock_irqrestore(&dev->lock, flags); - /* unbind gadget driver */ - driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; @@ -1966,6 +1936,7 @@ static int langwell_stop(struct usb_gadget_driver *driver) dev_info(&dev->pdev->dev, "unregistered driver '%s'\n", driver->driver.name); dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__); + return 0; } @@ -2657,12 +2628,10 @@ done: dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); } - /* port change detect interrupt handler */ static void handle_port_change(struct langwell_udc *dev) { u32 portsc1, devlc; - u32 speed; dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -2677,24 +2646,9 @@ static void handle_port_change(struct langwell_udc *dev) /* bus reset is finished */ if (!(portsc1 & PORTS_PR)) { /* get the speed */ - speed = LPM_PSPD(devlc); - switch (speed) { - case LPM_SPEED_HIGH: - dev->gadget.speed = USB_SPEED_HIGH; - break; - case LPM_SPEED_FULL: - dev->gadget.speed = USB_SPEED_FULL; - break; - case LPM_SPEED_LOW: - dev->gadget.speed = USB_SPEED_LOW; - break; - default: - dev->gadget.speed = USB_SPEED_UNKNOWN; - break; - } - dev_vdbg(&dev->pdev->dev, - "speed = %d, dev->gadget.speed = %d\n", - speed, dev->gadget.speed); + dev->gadget.speed = lpm_device_speed(devlc); + dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n", + dev->gadget.speed); } /* LPM L0 to L1 */ @@ -2969,7 +2923,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev) handle_port_change(dev); } - /* suspend interrrupt */ + /* suspend interrupt */ if (irq_sts & STS_SLI) { dev_vdbg(&dev->pdev->dev, "suspend interrupt\n"); handle_bus_suspend(dev); @@ -2999,7 +2953,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev) /* release device structure */ static void gadget_release(struct device *_dev) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = dev_get_drvdata(_dev); dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -3057,7 +3011,7 @@ static void sram_deinit(struct langwell_udc *dev) /* tear down the binding between this driver and the pci device */ static void langwell_udc_remove(struct pci_dev *pdev) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = pci_get_drvdata(pdev); DECLARE_COMPLETION(done); @@ -3124,8 +3078,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) /* free dev, wait for the release() finished */ wait_for_completion(&done); - - the_controller = NULL; } @@ -3144,11 +3096,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, size_t size; int retval; - if (the_controller) { - dev_warn(&pdev->dev, "ignoring\n"); - return -EBUSY; - } - /* alloc, and start init */ dev = kzalloc(sizeof *dev, GFP_KERNEL); if (dev == NULL) { @@ -3368,8 +3315,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, "After langwell_udc_probe(), print all registers:\n"); print_all_registers(dev); - the_controller = dev; - retval = device_register(&dev->gadget.dev); if (retval) goto error; @@ -3404,7 +3349,7 @@ error: /* device controller suspend */ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = pci_get_drvdata(pdev); dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -3452,7 +3397,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state) /* device controller resume */ static int langwell_udc_resume(struct pci_dev *pdev) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = pci_get_drvdata(pdev); size_t size; dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -3534,7 +3479,7 @@ static int langwell_udc_resume(struct pci_dev *pdev) /* pci driver shutdown */ static void langwell_udc_shutdown(struct pci_dev *pdev) { - struct langwell_udc *dev = the_controller; + struct langwell_udc *dev = pci_get_drvdata(pdev); u32 usbmode; dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h index f1d9c1bb04f3..ef79e242b7b0 100644 --- a/drivers/usb/gadget/langwell_udc.h +++ b/drivers/usb/gadget/langwell_udc.h @@ -5,16 +5,6 @@ * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * */ #include <linux/usb/langwell_udc.h> @@ -231,3 +221,5 @@ struct langwell_udc { u16 dev_status; }; +#define gadget_to_langwell(g) container_of((g), struct langwell_udc, gadget) + diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 491f825ed5c9..91d0af2a24a8 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include <linux/module.h> @@ -370,7 +360,7 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep, ep->pipectr = get_pipectr_addr(pipenum); ep->pipenum = pipenum; - ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp(desc); m66592->pipenum2ep[pipenum] = ep; m66592->epaddr2ep[desc->bEndpointAddress&USB_ENDPOINT_NUMBER_MASK] = ep; INIT_LIST_HEAD(&ep->queue); @@ -447,7 +437,7 @@ static int alloc_pipe_config(struct m66592_ep *ep, ep->type = info.type; info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - info.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(desc); info.interval = desc->bInterval; if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) info.dir_in = 1; @@ -1674,7 +1664,7 @@ static int __init m66592_probe(struct platform_device *pdev) m66592->timer.data = (unsigned long)m66592; m66592->reg = reg; - ret = request_irq(ires->start, m66592_irq, IRQF_DISABLED | IRQF_SHARED, + ret = request_irq(ires->start, m66592_irq, IRQF_SHARED, udc_name, m66592); if (ret < 0) { pr_err("request_irq error (%d)\n", ret); diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h index 7b93d579af37..9d9f7e39f037 100644 --- a/drivers/usb/gadget/m66592-udc.h +++ b/drivers/usb/gadget/m66592-udc.h @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #ifndef __M66592_UDC_H__ diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c index d3eb27427c58..e24f72f82a47 100644 --- a/drivers/usb/gadget/mass_storage.c +++ b/drivers/usb/gadget/mass_storage.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ @@ -169,7 +160,7 @@ static struct usb_composite_driver msg_driver = { .name = "g_mass_storage", .dev = &msg_device_desc, .iProduct = DRIVER_DESC, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .needs_serial = 1, }; diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index 8c7b74717d85..7e7f515b8b19 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h index 65f1f7c3bd4e..daa75c12f336 100644 --- a/drivers/usb/gadget/mv_udc.h +++ b/drivers/usb/gadget/mv_udc.h @@ -1,3 +1,11 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ #ifndef __MV_UDC_H #define __MV_UDC_H @@ -194,14 +202,25 @@ struct mv_udc { unsigned int ep0_dir; unsigned int dev_addr; + unsigned int test_mode; int errors; unsigned softconnect:1, vbus_active:1, remote_wakeup:1, softconnected:1, - force_fs:1; - struct clk *clk; + force_fs:1, + clock_gating:1, + active:1; + + struct work_struct vbus_work; + struct workqueue_struct *qwork; + + struct mv_usb_platform_data *pdata; + + /* some SOC has mutiple clock sources for USB*/ + unsigned int clknum; + struct clk *clk[0]; }; /* endpoint data structure */ @@ -225,6 +244,7 @@ struct mv_req { struct mv_dtd *dtd, *head, *tail; struct mv_ep *ep; struct list_head queue; + unsigned int test_mode; unsigned dtd_count; unsigned mapped:1; }; @@ -289,6 +309,4 @@ struct mv_dtd { struct mv_dtd *next_dtd_virt; }; -extern int mv_udc_phy_init(unsigned int base); - #endif diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index ce1ac2bcb314..892412103dd8 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -1,3 +1,14 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * Author: Chao Xie <chao.xie@marvell.com> + * Neil Zhang <zhangwm@marvell.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + #include <linux/module.h> #include <linux/pci.h> #include <linux/dma-mapping.h> @@ -22,6 +33,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/platform_data/mv_usb.h> #include <asm/system.h> #include <asm/unaligned.h> @@ -45,6 +57,8 @@ #define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) #define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) +static DECLARE_COMPLETION(release_done); + static const char driver_name[] = "mv_udc"; static const char driver_desc[] = DRIVER_DESC; @@ -53,6 +67,7 @@ static struct mv_udc *the_controller; int mv_usb_otgsc; static void nuke(struct mv_ep *ep, int status); +static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver); /* for endpoint 0 operations */ static const struct usb_endpoint_descriptor mv_ep0_desc = { @@ -82,14 +97,16 @@ static void ep0_reset(struct mv_udc *udc) (EP0_MAX_PKT_SIZE << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) | EP_QUEUE_HEAD_IOS; + ep->dqh->next_dtd_ptr = EP_QUEUE_HEAD_NEXT_TERMINATE; + epctrlx = readl(&udc->op_regs->epctrlx[0]); if (i) { /* TX */ - epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST + epctrlx |= EPCTRL_TX_ENABLE | (USB_ENDPOINT_XFER_CONTROL << EPCTRL_TX_EP_TYPE_SHIFT); } else { /* RX */ - epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST + epctrlx |= EPCTRL_RX_ENABLE | (USB_ENDPOINT_XFER_CONTROL << EPCTRL_RX_EP_TYPE_SHIFT); } @@ -122,6 +139,7 @@ static int process_ep_req(struct mv_udc *udc, int index, int i, direction; int retval = 0; u32 errors; + u32 bit_pos; curr_dqh = &udc->ep_dqh[index]; direction = index % 2; @@ -139,10 +157,20 @@ static int process_ep_req(struct mv_udc *udc, int index, errors = curr_dtd->size_ioc_sts & DTD_ERROR_MASK; if (!errors) { - remaining_length += + remaining_length = (curr_dtd->size_ioc_sts & DTD_PACKET_SIZE) >> DTD_LENGTH_BIT_POS; actual -= remaining_length; + + if (remaining_length) { + if (direction) { + dev_dbg(&udc->dev->dev, + "TX dTD remains data\n"); + retval = -EPROTO; + break; + } else + break; + } } else { dev_info(&udc->dev->dev, "complete_tr error: ep=%d %s: error = 0x%x\n", @@ -164,6 +192,20 @@ static int process_ep_req(struct mv_udc *udc, int index, if (retval) return retval; + if (direction == EP_DIR_OUT) + bit_pos = 1 << curr_req->ep->ep_num; + else + bit_pos = 1 << (16 + curr_req->ep->ep_num); + + while ((curr_dqh->curr_dtd_ptr == curr_dtd->td_dma)) { + if (curr_dtd->dtd_next == EP_QUEUE_HEAD_NEXT_TERMINATE) { + while (readl(&udc->op_regs->epstatus) & bit_pos) + udelay(1); + break; + } + udelay(1); + } + curr_req->req.actual = actual; return 0; @@ -335,7 +377,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req) } else { /* Write dQH next pointer and terminate bit to 0 */ dqh->next_dtd_ptr = req->head->td_dma - & EP_QUEUE_HEAD_NEXT_POINTER_MASK;; + & EP_QUEUE_HEAD_NEXT_POINTER_MASK; dqh->size_ioc_int_sts = 0; /* Ensure that updates to the QH will occur before priming. */ @@ -376,7 +418,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req) } } done: - return retval;; + return retval; } static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length, @@ -481,6 +523,7 @@ static int mv_ep_enable(struct usb_ep *_ep, u16 max = 0; u32 bit_pos, epctrlx, direction; unsigned char zlt = 0, ios = 0, mult = 0; + unsigned long flags; ep = container_of(_ep, struct mv_ep, ep); udc = ep->udc; @@ -493,7 +536,7 @@ static int mv_ep_enable(struct usb_ep *_ep, return -ESHUTDOWN; direction = ep_dir(ep); - max = le16_to_cpu(desc->wMaxPacketSize); + max = usb_endpoint_maxp(desc); /* * disable HW zero length termination select @@ -501,9 +544,6 @@ static int mv_ep_enable(struct usb_ep *_ep, */ zlt = 1; - /* Get the endpoint queue head address */ - dqh = (struct mv_dqh *)ep->dqh; - bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); /* Check if the Endpoint is Primed */ @@ -532,7 +572,7 @@ static int mv_ep_enable(struct usb_ep *_ep, case USB_ENDPOINT_XFER_ISOC: /* Calculate transactions needed for high bandwidth iso */ mult = (unsigned char)(1 + ((max >> 11) & 0x03)); - max = max & 0x8ff; /* bit 0~10 */ + max = max & 0x7ff; /* bit 0~10 */ /* 3 transactions at most */ if (mult > 3) goto en_done; @@ -540,6 +580,10 @@ static int mv_ep_enable(struct usb_ep *_ep, default: goto en_done; } + + spin_lock_irqsave(&udc->lock, flags); + /* Get the endpoint queue head address */ + dqh = ep->dqh; dqh->max_packet_length = (max << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) | (mult << EP_QUEUE_HEAD_MULT_POS) | (zlt ? EP_QUEUE_HEAD_ZLT_SEL : 0) @@ -572,18 +616,20 @@ static int mv_ep_enable(struct usb_ep *_ep, */ epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); if ((epctrlx & EPCTRL_RX_ENABLE) == 0) { - epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + epctrlx |= (USB_ENDPOINT_XFER_BULK << EPCTRL_RX_EP_TYPE_SHIFT); writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); } epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]); if ((epctrlx & EPCTRL_TX_ENABLE) == 0) { - epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + epctrlx |= (USB_ENDPOINT_XFER_BULK << EPCTRL_TX_EP_TYPE_SHIFT); writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]); } + spin_unlock_irqrestore(&udc->lock, flags); + return 0; en_done: return -EINVAL; @@ -595,6 +641,7 @@ static int mv_ep_disable(struct usb_ep *_ep) struct mv_ep *ep; struct mv_dqh *dqh; u32 bit_pos, epctrlx, direction; + unsigned long flags; ep = container_of(_ep, struct mv_ep, ep); if ((_ep == NULL) || !ep->desc) @@ -605,6 +652,8 @@ static int mv_ep_disable(struct usb_ep *_ep) /* Get the endpoint queue head address */ dqh = ep->dqh; + spin_lock_irqsave(&udc->lock, flags); + direction = ep_dir(ep); bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); @@ -623,6 +672,9 @@ static int mv_ep_disable(struct usb_ep *_ep) ep->desc = NULL; ep->stopped = 1; + + spin_unlock_irqrestore(&udc->lock, flags); + return 0; } @@ -655,37 +707,28 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) { struct mv_udc *udc; u32 bit_pos, direction; - struct mv_ep *ep = container_of(_ep, struct mv_ep, ep); + struct mv_ep *ep; unsigned int loops; + if (!_ep) + return; + + ep = container_of(_ep, struct mv_ep, ep); + if (!ep->desc) + return; + udc = ep->udc; direction = ep_dir(ep); - bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num); - /* - * Flushing will halt the pipe - * Write 1 to the Flush register - */ - writel(bit_pos, &udc->op_regs->epflush); - /* Wait until flushing completed */ - loops = LOOPS(FLUSH_TIMEOUT); - while (readl(&udc->op_regs->epflush) & bit_pos) { - /* - * ENDPTFLUSH bit should be cleared to indicate this - * operation is complete - */ - if (loops == 0) { - dev_err(&udc->dev->dev, - "TIMEOUT for ENDPTFLUSH=0x%x, bit_pos=0x%x\n", - (unsigned)readl(&udc->op_regs->epflush), - (unsigned)bit_pos); - return; - } - loops--; - udelay(LOOPS_USEC); - } + if (ep->ep_num == 0) + bit_pos = (1 << 16) | 1; + else if (direction == EP_DIR_OUT) + bit_pos = 1 << ep->ep_num; + else + bit_pos = 1 << (16 + ep->ep_num); + loops = LOOPS(EPSTATUS_TIMEOUT); - while (readl(&udc->op_regs->epstatus) & bit_pos) { + do { unsigned int inter_loops; if (loops == 0) { @@ -700,7 +743,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) /* Wait until flushing completed */ inter_loops = LOOPS(FLUSH_TIMEOUT); - while (readl(&udc->op_regs->epflush) & bit_pos) { + while (readl(&udc->op_regs->epflush)) { /* * ENDPTFLUSH bit should be cleared to indicate this * operation is complete @@ -717,7 +760,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep) udelay(LOOPS_USEC); } loops--; - } + } while (readl(&udc->op_regs->epstatus) & bit_pos); } /* queues (submits) an I/O request to an endpoint */ @@ -987,6 +1030,22 @@ static struct usb_ep_ops mv_ep_ops = { .fifo_flush = mv_ep_fifo_flush, /* flush fifo */ }; +static void udc_clock_enable(struct mv_udc *udc) +{ + unsigned int i; + + for (i = 0; i < udc->clknum; i++) + clk_enable(udc->clk[i]); +} + +static void udc_clock_disable(struct mv_udc *udc) +{ + unsigned int i; + + for (i = 0; i < udc->clknum; i++) + clk_disable(udc->clk[i]); +} + static void udc_stop(struct mv_udc *udc) { u32 tmp; @@ -1075,6 +1134,40 @@ static int udc_reset(struct mv_udc *udc) return 0; } +static int mv_udc_enable(struct mv_udc *udc) +{ + int retval; + + if (udc->clock_gating == 0 || udc->active) + return 0; + + dev_dbg(&udc->dev->dev, "enable udc\n"); + udc_clock_enable(udc); + if (udc->pdata->phy_init) { + retval = udc->pdata->phy_init(udc->phy_regs); + if (retval) { + dev_err(&udc->dev->dev, + "init phy error %d\n", retval); + udc_clock_disable(udc); + return retval; + } + } + udc->active = 1; + + return 0; +} + +static void mv_udc_disable(struct mv_udc *udc) +{ + if (udc->clock_gating && udc->active) { + dev_dbg(&udc->dev->dev, "disable udc\n"); + if (udc->pdata->phy_deinit) + udc->pdata->phy_deinit(udc->phy_regs); + udc_clock_disable(udc); + udc->active = 0; + } +} + static int mv_udc_get_frame(struct usb_gadget *gadget) { struct mv_udc *udc; @@ -1110,22 +1203,68 @@ static int mv_udc_wakeup(struct usb_gadget *gadget) return 0; } +static int mv_udc_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct mv_udc *udc; + unsigned long flags; + int retval = 0; + + udc = container_of(gadget, struct mv_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + + dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, udc->softconnect, udc->vbus_active); + + udc->vbus_active = (is_active != 0); + if (udc->driver && udc->softconnect && udc->vbus_active) { + retval = mv_udc_enable(udc); + if (retval == 0) { + /* Clock is disabled, need re-init registers */ + udc_reset(udc); + ep0_reset(udc); + udc_start(udc); + } + } else if (udc->driver && udc->softconnect) { + /* stop all the transfer in queue*/ + stop_activity(udc, udc->driver); + udc_stop(udc); + mv_udc_disable(udc); + } + + spin_unlock_irqrestore(&udc->lock, flags); + return retval; +} + static int mv_udc_pullup(struct usb_gadget *gadget, int is_on) { struct mv_udc *udc; unsigned long flags; + int retval = 0; udc = container_of(gadget, struct mv_udc, gadget); spin_lock_irqsave(&udc->lock, flags); + dev_dbg(&udc->dev->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, udc->softconnect, udc->vbus_active); + udc->softconnect = (is_on != 0); - if (udc->driver && udc->softconnect) - udc_start(udc); - else + if (udc->driver && udc->softconnect && udc->vbus_active) { + retval = mv_udc_enable(udc); + if (retval == 0) { + /* Clock is disabled, need re-init registers */ + udc_reset(udc); + ep0_reset(udc); + udc_start(udc); + } + } else if (udc->driver && udc->vbus_active) { + /* stop all the transfer in queue*/ + stop_activity(udc, udc->driver); udc_stop(udc); + mv_udc_disable(udc); + } spin_unlock_irqrestore(&udc->lock, flags); - return 0; + return retval; } static int mv_udc_start(struct usb_gadget_driver *driver, @@ -1140,17 +1279,15 @@ static const struct usb_gadget_ops mv_ops = { /* tries to wake up the host connected to this gadget */ .wakeup = mv_udc_wakeup, + /* notify controller that VBUS is powered or not */ + .vbus_session = mv_udc_vbus_session, + /* D+ pullup, software-controlled connect/disconnect to USB host */ .pullup = mv_udc_pullup, .start = mv_udc_start, .stop = mv_udc_stop, }; -static void mv_udc_testmode(struct mv_udc *udc, u16 index, bool enter) -{ - dev_info(&udc->dev->dev, "Test Mode is not support yet\n"); -} - static int eps_init(struct mv_udc *udc) { struct mv_ep *ep; @@ -1257,7 +1394,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver, udc->usb_state = USB_STATE_ATTACHED; udc->ep0_state = WAIT_FOR_SETUP; - udc->ep0_dir = USB_DIR_OUT; + udc->ep0_dir = EP_DIR_OUT; spin_unlock_irqrestore(&udc->lock, flags); @@ -1269,9 +1406,13 @@ static int mv_udc_start(struct usb_gadget_driver *driver, udc->gadget.dev.driver = NULL; return retval; } - udc_reset(udc); - ep0_reset(udc); - udc_start(udc); + + /* pullup is always on */ + mv_udc_pullup(&udc->gadget, 1); + + /* When boot with cable attached, there will be no vbus irq occurred */ + if (udc->qwork) + queue_work(udc->qwork, &udc->vbus_work); return 0; } @@ -1284,13 +1425,16 @@ static int mv_udc_stop(struct usb_gadget_driver *driver) if (!udc) return -ENODEV; - udc_stop(udc); - spin_lock_irqsave(&udc->lock, flags); + mv_udc_enable(udc); + udc_stop(udc); + /* stop all usb activities */ udc->gadget.speed = USB_SPEED_UNKNOWN; stop_activity(udc, driver); + mv_udc_disable(udc); + spin_unlock_irqrestore(&udc->lock, flags); /* unbind gadget driver */ @@ -1301,6 +1445,31 @@ static int mv_udc_stop(struct usb_gadget_driver *driver) return 0; } +static void mv_set_ptc(struct mv_udc *udc, u32 mode) +{ + u32 portsc; + + portsc = readl(&udc->op_regs->portsc[0]); + portsc |= mode << 16; + writel(portsc, &udc->op_regs->portsc[0]); +} + +static void prime_status_complete(struct usb_ep *ep, struct usb_request *_req) +{ + struct mv_udc *udc = the_controller; + struct mv_req *req = container_of(_req, struct mv_req, req); + unsigned long flags; + + dev_info(&udc->dev->dev, "switch to test mode %d\n", req->test_mode); + + spin_lock_irqsave(&udc->lock, flags); + if (req->test_mode) { + mv_set_ptc(udc, req->test_mode); + req->test_mode = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); +} + static int udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) { @@ -1310,6 +1479,7 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) ep = &udc->eps[0]; udc->ep0_dir = direction; + udc->ep0_state = WAIT_FOR_OUT_STATUS; req = udc->status_req; @@ -1323,9 +1493,21 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) req->ep = ep; req->req.status = -EINPROGRESS; req->req.actual = 0; - req->req.complete = NULL; + if (udc->test_mode) { + req->req.complete = prime_status_complete; + req->test_mode = udc->test_mode; + udc->test_mode = 0; + } else + req->req.complete = NULL; req->dtd_count = 0; + if (req->req.dma == DMA_ADDR_INVALID) { + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, + ep_dir(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + } + /* prime the data phase */ if (!req_to_dtd(req)) retval = queue_dtd(ep, req); @@ -1346,6 +1528,17 @@ out: return retval; } +static void mv_udc_testmode(struct mv_udc *udc, u16 index) +{ + if (index <= TEST_FORCE_EN) { + udc->test_mode = index; + if (udc_prime_status(udc, EP_DIR_IN, 0, true)) + ep0_stall(udc); + } else + dev_err(&udc->dev->dev, + "This test mode(%d) is not supported\n", index); +} + static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup) { udc->dev_addr = (u8)setup->wValue; @@ -1360,7 +1553,7 @@ static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup) static void ch9getstatus(struct mv_udc *udc, u8 ep_num, struct usb_ctrlrequest *setup) { - u16 status; + u16 status = 0; int retval; if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) @@ -1388,6 +1581,8 @@ static void ch9getstatus(struct mv_udc *udc, u8 ep_num, retval = udc_prime_status(udc, EP_DIR_IN, status, false); if (retval) ep0_stall(udc); + else + udc->ep0_state = DATA_STATE_XMIT; } static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) @@ -1402,9 +1597,6 @@ static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) case USB_DEVICE_REMOTE_WAKEUP: udc->remote_wakeup = 0; break; - case USB_DEVICE_TEST_MODE: - mv_udc_testmode(udc, 0, false); - break; default: goto out; } @@ -1433,8 +1625,6 @@ static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) if (udc_prime_status(udc, EP_DIR_IN, 0, true)) ep0_stall(udc); - else - udc->ep0_state = DATA_STATE_XMIT; out: return; } @@ -1452,16 +1642,16 @@ static void ch9setfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup) break; case USB_DEVICE_TEST_MODE: if (setup->wIndex & 0xFF - && udc->gadget.speed != USB_SPEED_HIGH) - goto out; - if (udc->usb_state == USB_STATE_CONFIGURED - || udc->usb_state == USB_STATE_ADDRESS - || udc->usb_state == USB_STATE_DEFAULT) - mv_udc_testmode(udc, - setup->wIndex & 0xFF00, true); - else - goto out; - break; + || udc->gadget.speed != USB_SPEED_HIGH) + ep0_stall(udc); + + if (udc->usb_state != USB_STATE_CONFIGURED + && udc->usb_state != USB_STATE_ADDRESS + && udc->usb_state != USB_STATE_DEFAULT) + ep0_stall(udc); + + mv_udc_testmode(udc, (setup->wIndex >> 8)); + goto out; default: goto out; } @@ -1599,8 +1789,7 @@ static void get_setup_data(struct mv_udc *udc, u8 ep_num, u8 *buffer_ptr) dqh = &udc->ep_dqh[ep_num * 2 + EP_DIR_OUT]; /* Clear bit in ENDPTSETUPSTAT */ - temp = readl(&udc->op_regs->epsetupstat); - writel(temp | (1 << ep_num), &udc->op_regs->epsetupstat); + writel((1 << ep_num), &udc->op_regs->epsetupstat); /* while a hazard exists when setup package arrives */ do { @@ -1871,23 +2060,57 @@ static irqreturn_t mv_udc_irq(int irq, void *dev) return IRQ_HANDLED; } +static irqreturn_t mv_udc_vbus_irq(int irq, void *dev) +{ + struct mv_udc *udc = (struct mv_udc *)dev; + + /* polling VBUS and init phy may cause too much time*/ + if (udc->qwork) + queue_work(udc->qwork, &udc->vbus_work); + + return IRQ_HANDLED; +} + +static void mv_udc_vbus_work(struct work_struct *work) +{ + struct mv_udc *udc; + unsigned int vbus; + + udc = container_of(work, struct mv_udc, vbus_work); + if (!udc->pdata->vbus) + return; + + vbus = udc->pdata->vbus->poll(); + dev_info(&udc->dev->dev, "vbus is %d\n", vbus); + + if (vbus == VBUS_HIGH) + mv_udc_vbus_session(&udc->gadget, 1); + else if (vbus == VBUS_LOW) + mv_udc_vbus_session(&udc->gadget, 0); +} + /* release device structure */ static void gadget_release(struct device *_dev) { struct mv_udc *udc = the_controller; complete(udc->done); - kfree(udc); } -static int mv_udc_remove(struct platform_device *dev) +static int __devexit mv_udc_remove(struct platform_device *dev) { struct mv_udc *udc = the_controller; - DECLARE_COMPLETION(done); + int clk_i; usb_del_gadget_udc(&udc->gadget); - udc->done = &done; + if (udc->qwork) { + flush_workqueue(udc->qwork); + destroy_workqueue(udc->qwork); + } + + if (udc->pdata && udc->pdata->vbus && udc->clock_gating) + free_irq(udc->pdata->vbus->irq, &dev->dev); /* free memory allocated in probe */ if (udc->dtd_pool) @@ -1902,6 +2125,8 @@ static int mv_udc_remove(struct platform_device *dev) if (udc->irq) free_irq(udc->irq, &dev->dev); + mv_udc_disable(udc); + if (udc->cap_regs) iounmap(udc->cap_regs); udc->cap_regs = NULL; @@ -1915,45 +2140,62 @@ static int mv_udc_remove(struct platform_device *dev) kfree(udc->status_req); } + for (clk_i = 0; clk_i <= udc->clknum; clk_i++) + clk_put(udc->clk[clk_i]); + device_unregister(&udc->gadget.dev); /* free dev, wait for the release() finished */ - wait_for_completion(&done); + wait_for_completion(udc->done); + kfree(udc); the_controller = NULL; return 0; } -int mv_udc_probe(struct platform_device *dev) +static int __devinit mv_udc_probe(struct platform_device *dev) { + struct mv_usb_platform_data *pdata = dev->dev.platform_data; struct mv_udc *udc; int retval = 0; + int clk_i = 0; struct resource *r; size_t size; - udc = kzalloc(sizeof *udc, GFP_KERNEL); + if (pdata == NULL) { + dev_err(&dev->dev, "missing platform_data\n"); + return -ENODEV; + } + + size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum; + udc = kzalloc(size, GFP_KERNEL); if (udc == NULL) { dev_err(&dev->dev, "failed to allocate memory for udc\n"); - retval = -ENOMEM; - goto error; + return -ENOMEM; } + the_controller = udc; + udc->done = &release_done; + udc->pdata = dev->dev.platform_data; spin_lock_init(&udc->lock); udc->dev = dev; - udc->clk = clk_get(&dev->dev, "U2OCLK"); - if (IS_ERR(udc->clk)) { - retval = PTR_ERR(udc->clk); - goto error; + udc->clknum = pdata->clknum; + for (clk_i = 0; clk_i < udc->clknum; clk_i++) { + udc->clk[clk_i] = clk_get(&dev->dev, pdata->clkname[clk_i]); + if (IS_ERR(udc->clk[clk_i])) { + retval = PTR_ERR(udc->clk[clk_i]); + goto err_put_clk; + } } - r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2o"); + r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs"); if (r == NULL) { dev_err(&dev->dev, "no I/O memory resource defined\n"); retval = -ENODEV; - goto error; + goto err_put_clk; } udc->cap_regs = (struct mv_cap_regs __iomem *) @@ -1961,29 +2203,31 @@ int mv_udc_probe(struct platform_device *dev) if (udc->cap_regs == NULL) { dev_err(&dev->dev, "failed to map I/O memory\n"); retval = -EBUSY; - goto error; + goto err_put_clk; } - r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2ophy"); + r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "phyregs"); if (r == NULL) { dev_err(&dev->dev, "no phy I/O memory resource defined\n"); retval = -ENODEV; - goto error; + goto err_iounmap_capreg; } udc->phy_regs = (unsigned int)ioremap(r->start, resource_size(r)); if (udc->phy_regs == 0) { dev_err(&dev->dev, "failed to map phy I/O memory\n"); retval = -EBUSY; - goto error; + goto err_iounmap_capreg; } /* we will acces controller register, so enable the clk */ - clk_enable(udc->clk); - retval = mv_udc_phy_init(udc->phy_regs); - if (retval) { - dev_err(&dev->dev, "phy initialization error %d\n", retval); - goto error; + udc_clock_enable(udc); + if (pdata->phy_init) { + retval = pdata->phy_init(udc->phy_regs); + if (retval) { + dev_err(&dev->dev, "phy init error %d\n", retval); + goto err_iounmap_phyreg; + } } udc->op_regs = (struct mv_op_regs __iomem *)((u32)udc->cap_regs @@ -1991,6 +2235,13 @@ int mv_udc_probe(struct platform_device *dev) & CAPLENGTH_MASK)); udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK; + /* + * some platform will use usb to download image, it may not disconnect + * usb gadget before loading kernel. So first stop udc here. + */ + udc_stop(udc); + writel(0xFFFFFFFF, &udc->op_regs->usbsts); + size = udc->max_eps * sizeof(struct mv_dqh) *2; size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1); udc->ep_dqh = dma_alloc_coherent(&dev->dev, size, @@ -1999,7 +2250,7 @@ int mv_udc_probe(struct platform_device *dev) if (udc->ep_dqh == NULL) { dev_err(&dev->dev, "allocate dQH memory failed\n"); retval = -ENOMEM; - goto error; + goto err_disable_clock; } udc->ep_dqh_size = size; @@ -2012,7 +2263,7 @@ int mv_udc_probe(struct platform_device *dev) if (!udc->dtd_pool) { retval = -ENOMEM; - goto error; + goto err_free_dma; } size = udc->max_eps * sizeof(struct mv_ep) *2; @@ -2020,7 +2271,7 @@ int mv_udc_probe(struct platform_device *dev) if (udc->eps == NULL) { dev_err(&dev->dev, "allocate ep memory failed\n"); retval = -ENOMEM; - goto error; + goto err_destroy_dma; } /* initialize ep0 status request structure */ @@ -2028,13 +2279,13 @@ int mv_udc_probe(struct platform_device *dev) if (!udc->status_req) { dev_err(&dev->dev, "allocate status_req memory failed\n"); retval = -ENOMEM; - goto error; + goto err_free_eps; } INIT_LIST_HEAD(&udc->status_req->queue); /* allocate a small amount of memory to get valid address */ udc->status_req->req.buf = kzalloc(8, GFP_KERNEL); - udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf); + udc->status_req->req.dma = DMA_ADDR_INVALID; udc->resume_state = USB_STATE_NOTATTACHED; udc->usb_state = USB_STATE_POWERED; @@ -2045,15 +2296,15 @@ int mv_udc_probe(struct platform_device *dev) if (r == NULL) { dev_err(&dev->dev, "no IRQ resource defined\n"); retval = -ENODEV; - goto error; + goto err_free_status_req; } udc->irq = r->start; if (request_irq(udc->irq, mv_udc_irq, - IRQF_DISABLED | IRQF_SHARED, driver_name, udc)) { + IRQF_SHARED, driver_name, udc)) { dev_err(&dev->dev, "Request irq %d for UDC failed\n", udc->irq); retval = -ENODEV; - goto error; + goto err_free_status_req; } /* initialize gadget structure */ @@ -2072,18 +2323,82 @@ int mv_udc_probe(struct platform_device *dev) retval = device_register(&udc->gadget.dev); if (retval) - goto error; + goto err_free_irq; eps_init(udc); - the_controller = udc; + /* VBUS detect: we can disable/enable clock on demand.*/ + if (pdata->vbus) { + udc->clock_gating = 1; + retval = request_threaded_irq(pdata->vbus->irq, NULL, + mv_udc_vbus_irq, IRQF_ONESHOT, "vbus", udc); + if (retval) { + dev_info(&dev->dev, + "Can not request irq for VBUS, " + "disable clock gating\n"); + udc->clock_gating = 0; + } + + udc->qwork = create_singlethread_workqueue("mv_udc_queue"); + if (!udc->qwork) { + dev_err(&dev->dev, "cannot create workqueue\n"); + retval = -ENOMEM; + goto err_unregister; + } + + INIT_WORK(&udc->vbus_work, mv_udc_vbus_work); + } + + /* + * When clock gating is supported, we can disable clk and phy. + * If not, it means that VBUS detection is not supported, we + * have to enable vbus active all the time to let controller work. + */ + if (udc->clock_gating) { + if (udc->pdata->phy_deinit) + udc->pdata->phy_deinit(udc->phy_regs); + udc_clock_disable(udc); + } else + udc->vbus_active = 1; retval = usb_add_gadget_udc(&dev->dev, &udc->gadget); - if (!retval) - return retval; -error: - if (udc) - mv_udc_remove(udc->dev); + if (retval) + goto err_unregister; + + dev_info(&dev->dev, "successful probe UDC device %s clock gating.\n", + udc->clock_gating ? "with" : "without"); + + return 0; + +err_unregister: + if (udc->pdata && udc->pdata->vbus && udc->clock_gating) + free_irq(pdata->vbus->irq, &dev->dev); + device_unregister(&udc->gadget.dev); +err_free_irq: + free_irq(udc->irq, &dev->dev); +err_free_status_req: + kfree(udc->status_req->req.buf); + kfree(udc->status_req); +err_free_eps: + kfree(udc->eps); +err_destroy_dma: + dma_pool_destroy(udc->dtd_pool); +err_free_dma: + dma_free_coherent(&dev->dev, udc->ep_dqh_size, + udc->ep_dqh, udc->ep_dqh_dma); +err_disable_clock: + if (udc->pdata->phy_deinit) + udc->pdata->phy_deinit(udc->phy_regs); + udc_clock_disable(udc); +err_iounmap_phyreg: + iounmap((void *)udc->phy_regs); +err_iounmap_capreg: + iounmap(udc->cap_regs); +err_put_clk: + for (clk_i--; clk_i >= 0; clk_i--) + clk_put(udc->clk[clk_i]); + the_controller = NULL; + kfree(udc); return retval; } @@ -2102,11 +2417,16 @@ static int mv_udc_resume(struct device *_dev) struct mv_udc *udc = the_controller; int retval; - retval = mv_udc_phy_init(udc->phy_regs); - if (retval) { - dev_err(_dev, "phy initialization error %d\n", retval); - return retval; + if (udc->pdata->phy_init) { + retval = udc->pdata->phy_init(udc->phy_regs); + if (retval) { + dev_err(&udc->dev->dev, + "init phy error %d when resume back\n", + retval); + return retval; + } } + udc_reset(udc); ep0_reset(udc); udc_start(udc); @@ -2120,9 +2440,21 @@ static const struct dev_pm_ops mv_udc_pm_ops = { }; #endif +static void mv_udc_shutdown(struct platform_device *dev) +{ + struct mv_udc *udc = the_controller; + u32 mode; + + /* reset controller mode to IDLE */ + mode = readl(&udc->op_regs->usbmode); + mode &= ~3; + writel(mode, &udc->op_regs->usbmode); +} + static struct platform_driver udc_driver = { .probe = mv_udc_probe, .remove = __exit_p(mv_udc_remove), + .shutdown = mv_udc_shutdown, .driver = { .owner = THIS_MODULE, .name = "pxa-u2o", diff --git a/drivers/usb/gadget/mv_udc_phy.c b/drivers/usb/gadget/mv_udc_phy.c deleted file mode 100644 index d4dea97e38a5..000000000000 --- a/drivers/usb/gadget/mv_udc_phy.c +++ /dev/null @@ -1,214 +0,0 @@ -#include <linux/delay.h> -#include <linux/timer.h> -#include <linux/io.h> -#include <linux/errno.h> - -#include <mach/cputype.h> - -#ifdef CONFIG_ARCH_MMP - -#define UTMI_REVISION 0x0 -#define UTMI_CTRL 0x4 -#define UTMI_PLL 0x8 -#define UTMI_TX 0xc -#define UTMI_RX 0x10 -#define UTMI_IVREF 0x14 -#define UTMI_T0 0x18 -#define UTMI_T1 0x1c -#define UTMI_T2 0x20 -#define UTMI_T3 0x24 -#define UTMI_T4 0x28 -#define UTMI_T5 0x2c -#define UTMI_RESERVE 0x30 -#define UTMI_USB_INT 0x34 -#define UTMI_DBG_CTL 0x38 -#define UTMI_OTG_ADDON 0x3c - -/* For UTMICTRL Register */ -#define UTMI_CTRL_USB_CLK_EN (1 << 31) -/* pxa168 */ -#define UTMI_CTRL_SUSPEND_SET1 (1 << 30) -#define UTMI_CTRL_SUSPEND_SET2 (1 << 29) -#define UTMI_CTRL_RXBUF_PDWN (1 << 24) -#define UTMI_CTRL_TXBUF_PDWN (1 << 11) - -#define UTMI_CTRL_INPKT_DELAY_SHIFT 30 -#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28 -#define UTMI_CTRL_PU_REF_SHIFT 20 -#define UTMI_CTRL_ARC_PULLDN_SHIFT 12 -#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1 -#define UTMI_CTRL_PWR_UP_SHIFT 0 -/* For UTMI_PLL Register */ -#define UTMI_PLL_CLK_BLK_EN_SHIFT 24 -#define UTMI_PLL_FBDIV_SHIFT 4 -#define UTMI_PLL_REFDIV_SHIFT 0 -#define UTMI_PLL_FBDIV_MASK 0x00000FF0 -#define UTMI_PLL_REFDIV_MASK 0x0000000F -#define UTMI_PLL_ICP_MASK 0x00007000 -#define UTMI_PLL_KVCO_MASK 0x00031000 -#define UTMI_PLL_PLLCALI12_SHIFT 29 -#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29) -#define UTMI_PLL_PLLVDD18_SHIFT 27 -#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27) -#define UTMI_PLL_PLLVDD12_SHIFT 25 -#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25) -#define UTMI_PLL_KVCO_SHIFT 15 -#define UTMI_PLL_ICP_SHIFT 12 -/* For UTMI_TX Register */ -#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27 -#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27) -#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK 26 -#define UTMI_TX_REG_EXT_FS_RCAL_EN (0x1 << 26) -#define UTMI_TX_LOW_VDD_EN_SHIFT 11 -#define UTMI_TX_IMPCAL_VTH_SHIFT 14 -#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14) -#define UTMI_TX_CK60_PHSEL_SHIFT 17 -#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17) -#define UTMI_TX_TXVDD12_SHIFT 22 -#define UTMI_TX_TXVDD12_MASK (0x3 << 22) -#define UTMI_TX_AMP_SHIFT 0 -#define UTMI_TX_AMP_MASK (0x7 << 0) -/* For UTMI_RX Register */ -#define UTMI_RX_SQ_THRESH_SHIFT 4 -#define UTMI_RX_SQ_THRESH_MASK (0xf << 4) -#define UTMI_REG_SQ_LENGTH_SHIFT 15 -#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15) - -#define REG_RCAL_START 0x00001000 -#define VCOCAL_START 0x00200000 -#define KVCO_EXT 0x00400000 -#define PLL_READY 0x00800000 -#define CLK_BLK_EN 0x01000000 -#endif - -static unsigned int u2o_read(unsigned int base, unsigned int offset) -{ - return readl(base + offset); -} - -static void u2o_set(unsigned int base, unsigned int offset, unsigned int value) -{ - unsigned int reg; - - reg = readl(base + offset); - reg |= value; - writel(reg, base + offset); - readl(base + offset); -} - -static void u2o_clear(unsigned int base, unsigned int offset, - unsigned int value) -{ - unsigned int reg; - - reg = readl(base + offset); - reg &= ~value; - writel(reg, base + offset); - readl(base + offset); -} - -static void u2o_write(unsigned int base, unsigned int offset, - unsigned int value) -{ - writel(value, base + offset); - readl(base + offset); -} - -#ifdef CONFIG_ARCH_MMP -int mv_udc_phy_init(unsigned int base) -{ - unsigned long timeout; - - /* Initialize the USB PHY power */ - if (cpu_is_pxa910()) { - u2o_set(base, UTMI_CTRL, (1 << UTMI_CTRL_INPKT_DELAY_SOF_SHIFT) - | (1 << UTMI_CTRL_PU_REF_SHIFT)); - } - - u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PLL_PWR_UP_SHIFT); - u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PWR_UP_SHIFT); - - /* UTMI_PLL settings */ - u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK - | UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK - | UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK - | UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK); - - u2o_set(base, UTMI_PLL, (0xee << UTMI_PLL_FBDIV_SHIFT) - | (0xb << UTMI_PLL_REFDIV_SHIFT) - | (3 << UTMI_PLL_PLLVDD18_SHIFT) - | (3 << UTMI_PLL_PLLVDD12_SHIFT) - | (3 << UTMI_PLL_PLLCALI12_SHIFT) - | (1 << UTMI_PLL_ICP_SHIFT) | (3 << UTMI_PLL_KVCO_SHIFT)); - - /* UTMI_TX */ - u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK - | UTMI_TX_TXVDD12_MASK - | UTMI_TX_CK60_PHSEL_MASK | UTMI_TX_IMPCAL_VTH_MASK - | UTMI_TX_REG_EXT_FS_RCAL_MASK | UTMI_TX_AMP_MASK); - u2o_set(base, UTMI_TX, (3 << UTMI_TX_TXVDD12_SHIFT) - | (4 << UTMI_TX_CK60_PHSEL_SHIFT) - | (4 << UTMI_TX_IMPCAL_VTH_SHIFT) - | (8 << UTMI_TX_REG_EXT_FS_RCAL_SHIFT) - | (3 << UTMI_TX_AMP_SHIFT)); - - /* UTMI_RX */ - u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK - | UTMI_REG_SQ_LENGTH_MASK); - if (cpu_is_pxa168()) - u2o_set(base, UTMI_RX, (7 << UTMI_RX_SQ_THRESH_SHIFT) - | (2 << UTMI_REG_SQ_LENGTH_SHIFT)); - else - u2o_set(base, UTMI_RX, (0x7 << UTMI_RX_SQ_THRESH_SHIFT) - | (2 << UTMI_REG_SQ_LENGTH_SHIFT)); - - /* UTMI_IVREF */ - if (cpu_is_pxa168()) - /* - * fixing Microsoft Altair board interface with NEC hub issue - - * Set UTMI_IVREF from 0x4a3 to 0x4bf - */ - u2o_write(base, UTMI_IVREF, 0x4bf); - - /* calibrate */ - timeout = jiffies + 100; - while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) { - if (time_after(jiffies, timeout)) - return -ETIME; - cpu_relax(); - } - - /* toggle VCOCAL_START bit of UTMI_PLL */ - udelay(200); - u2o_set(base, UTMI_PLL, VCOCAL_START); - udelay(40); - u2o_clear(base, UTMI_PLL, VCOCAL_START); - - /* toggle REG_RCAL_START bit of UTMI_TX */ - udelay(200); - u2o_set(base, UTMI_TX, REG_RCAL_START); - udelay(40); - u2o_clear(base, UTMI_TX, REG_RCAL_START); - udelay(200); - - /* make sure phy is ready */ - timeout = jiffies + 100; - while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) { - if (time_after(jiffies, timeout)) - return -ETIME; - cpu_relax(); - } - - if (cpu_is_pxa168()) { - u2o_set(base, UTMI_RESERVE, 1 << 5); - /* Turn on UTMI PHY OTG extension */ - u2o_write(base, UTMI_OTG_ADDON, 1); - } - return 0; -} -#else -int mv_udc_phy_init(unsigned int base) -{ - return 0; -} -#endif diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c index 62ee5087dcac..89530034dff1 100644 --- a/drivers/usb/gadget/ncm.c +++ b/drivers/usb/gadget/ncm.c @@ -14,15 +14,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define DEBUG */ diff --git a/drivers/usb/gadget/ndis.h b/drivers/usb/gadget/ndis.h index df886cec5ef4..b0e52fc277b4 100644 --- a/drivers/usb/gadget/ndis.h +++ b/drivers/usb/gadget/ndis.h @@ -10,12 +10,6 @@ * * This source code is offered for use in the public domain. You may * use, modify or distribute it freely. - * - * This code is distributed in the hope that it will be useful but - * WITHOUT ANY WARRANTY. ALL WARRANTIES, EXPRESS OR IMPLIED ARE HEREBY - * DISCLAIMED. This includes but is not limited to warranties of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * */ #ifndef _LINUX_NDIS_H diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index ab98ea926a11..d1b76368472f 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -204,7 +204,7 @@ net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff; + max = usb_endpoint_maxp(desc) & 0x1fff; spin_lock_irqsave(&dev->lock, flags); _ep->maxpacket = max & 0x7fff; @@ -1172,17 +1172,18 @@ net2272_pullup(struct usb_gadget *_gadget, int is_on) return 0; } -static int net2272_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int net2272_stop(struct usb_gadget_driver *driver); +static int net2272_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); +static int net2272_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops net2272_ops = { - .get_frame = net2272_get_frame, - .wakeup = net2272_wakeup, + .get_frame = net2272_get_frame, + .wakeup = net2272_wakeup, .set_selfpowered = net2272_set_selfpowered, - .pullup = net2272_pullup, - .start = net2272_start, - .stop = net2272_stop, + .pullup = net2272_pullup, + .udc_start = net2272_start, + .udc_stop = net2272_stop, }; /*---------------------------------------------------------------------------*/ @@ -1356,8 +1357,6 @@ net2272_set_fifo_mode(struct net2272 *dev, int mode) /*---------------------------------------------------------------------------*/ -static struct net2272 *the_controller; - static void net2272_usb_reset(struct net2272 *dev) { @@ -1453,20 +1452,17 @@ net2272_ep0_start(struct net2272 *dev) * disconnect is reported. then a host may connect again, or * the driver might get unbound. */ -static int net2272_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int net2272_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) { - struct net2272 *dev = the_controller; - int ret; + struct net2272 *dev; unsigned i; - if (!driver || !bind || !driver->unbind || !driver->setup || + if (!driver || !driver->unbind || !driver->setup || driver->speed != USB_SPEED_HIGH) return -EINVAL; - if (!dev) - return -ENODEV; - if (dev->driver) - return -EBUSY; + + dev = container_of(_gadget, struct net2272, gadget); for (i = 0; i < 4; ++i) dev->ep[i].irqs = 0; @@ -1475,14 +1471,6 @@ static int net2272_start(struct usb_gadget_driver *driver, driver->driver.bus = NULL; dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - ret = bind(&dev->gadget); - if (ret) { - dev_dbg(dev->dev, "bind to driver %s --> %d\n", - driver->driver.name, ret); - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return ret; - } /* ... then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. @@ -1510,33 +1498,21 @@ stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver) for (i = 0; i < 4; ++i) net2272_dequeue_all(&dev->ep[i]); - /* report disconnect; the driver is already quiesced */ - if (driver) { - spin_unlock(&dev->lock); - driver->disconnect(&dev->gadget); - spin_lock(&dev->lock); - - } net2272_usb_reinit(dev); } -static int net2272_stop(struct usb_gadget_driver *driver) +static int net2272_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) { - struct net2272 *dev = the_controller; + struct net2272 *dev; unsigned long flags; - if (!dev) - return -ENODEV; - if (!driver || driver != dev->driver) - return -EINVAL; + dev = container_of(_gadget, struct net2272, gadget); spin_lock_irqsave(&dev->lock, flags); stop_activity(dev, driver); spin_unlock_irqrestore(&dev->lock, flags); - net2272_pullup(&dev->gadget, 0); - - driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; @@ -1764,8 +1740,8 @@ net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat) dev->gadget.speed = USB_SPEED_HIGH; else dev->gadget.speed = USB_SPEED_FULL; - dev_dbg(dev->dev, "%s speed\n", - (dev->gadget.speed == USB_SPEED_HIGH) ? "high" : "full"); + dev_dbg(dev->dev, "%s\n", + usb_speed_string(dev->gadget.speed)); } ep = &dev->ep[0]; @@ -2238,7 +2214,6 @@ net2272_remove(struct net2272 *dev) device_remove_file(dev->dev, &dev_attr_registers); dev_info(dev->dev, "unbind\n"); - the_controller = NULL; } static struct net2272 * __devinit @@ -2246,11 +2221,6 @@ net2272_probe_init(struct device *dev, unsigned int irq) { struct net2272 *ret; - if (the_controller) { - dev_warn(dev, "ignoring\n"); - return ERR_PTR(-EBUSY); - } - if (!irq) { dev_dbg(dev, "No IRQ!\n"); return ERR_PTR(-ENODEV); @@ -2307,8 +2277,6 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags) dma_mode_string()); dev_info(dev->dev, "version: %s\n", driver_vers); - the_controller = dev; - ret = device_register(&dev->gadget.dev); if (ret) goto err_irq; @@ -2684,8 +2652,6 @@ net2272_plat_probe(struct platform_device *pdev) dev_info(&pdev->dev, "running in 16-bit, %sbyte swap local bus mode\n", (net2272_read(dev, LOCCTL) & (1 << BYTE_SWAP)) ? "" : "no "); - the_controller = dev; - return 0; err_io: diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 3dd40b4e675c..7f1bc9a73cda 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -33,15 +33,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #undef DEBUG /* messages on error and most fault paths */ @@ -169,7 +160,7 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) return -EDOM; /* sanity check ep-e/ep-f since their fifos are small */ - max = le16_to_cpu (desc->wMaxPacketSize) & 0x1fff; + max = usb_endpoint_maxp (desc) & 0x1fff; if (ep->num > 4 && max > 64) return -ERANGE; @@ -1410,17 +1401,18 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on) return 0; } -static int net2280_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)); -static int net2280_stop(struct usb_gadget_driver *driver); +static int net2280_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); +static int net2280_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver); static const struct usb_gadget_ops net2280_ops = { .get_frame = net2280_get_frame, .wakeup = net2280_wakeup, .set_selfpowered = net2280_set_selfpowered, .pullup = net2280_pullup, - .start = net2280_start, - .stop = net2280_stop, + .udc_start = net2280_start, + .udc_stop = net2280_stop, }; /*-------------------------------------------------------------------------*/ @@ -1640,7 +1632,7 @@ show_queues (struct device *_dev, struct device_attribute *attr, char *buf) default: val = "iso"; break; }; val; }), - le16_to_cpu (d->wMaxPacketSize) & 0x1fff, + usb_endpoint_maxp (d) & 0x1fff, ep->dma ? "dma" : "pio", ep->fifo_size ); } else /* ep0 should only have one transfer queued */ @@ -1753,8 +1745,6 @@ static void set_fifo_mode (struct net2280 *dev, int mode) * perhaps to bind specific drivers to specific devices. */ -static struct net2280 *the_controller; - static void usb_reset (struct net2280 *dev) { u32 tmp; @@ -1880,10 +1870,10 @@ static void ep0_start (struct net2280 *dev) * disconnect is reported. then a host may connect again, or * the driver might get unbound. */ -static int net2280_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int net2280_start(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) { - struct net2280 *dev = the_controller; + struct net2280 *dev; int retval; unsigned i; @@ -1891,14 +1881,11 @@ static int net2280_start(struct usb_gadget_driver *driver, * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE) * "must not be used in normal operation" */ - if (!driver - || driver->speed != USB_SPEED_HIGH - || !bind || !driver->setup) + if (!driver || driver->speed != USB_SPEED_HIGH + || !driver->setup) return -EINVAL; - if (!dev) - return -ENODEV; - if (dev->driver) - return -EBUSY; + + dev = container_of (_gadget, struct net2280, gadget); for (i = 0; i < 7; i++) dev->ep [i].irqs = 0; @@ -1908,14 +1895,6 @@ static int net2280_start(struct usb_gadget_driver *driver, driver->driver.bus = NULL; dev->driver = driver; dev->gadget.dev.driver = &driver->driver; - retval = bind(&dev->gadget); - if (retval) { - DEBUG (dev, "bind to driver %s --> %d\n", - driver->driver.name, retval); - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; - } retval = device_create_file (&dev->pdev->dev, &dev_attr_function); if (retval) goto err_unbind; @@ -1961,33 +1940,21 @@ stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver) for (i = 0; i < 7; i++) nuke (&dev->ep [i]); - /* report disconnect; the driver is already quiesced */ - if (driver) { - spin_unlock (&dev->lock); - driver->disconnect (&dev->gadget); - spin_lock (&dev->lock); - } - usb_reinit (dev); } -static int net2280_stop(struct usb_gadget_driver *driver) +static int net2280_stop(struct usb_gadget *_gadget, + struct usb_gadget_driver *driver) { - struct net2280 *dev = the_controller; + struct net2280 *dev; unsigned long flags; - if (!dev) - return -ENODEV; - if (!driver || driver != dev->driver || !driver->unbind) - return -EINVAL; + dev = container_of (_gadget, struct net2280, gadget); spin_lock_irqsave (&dev->lock, flags); stop_activity (dev, driver); spin_unlock_irqrestore (&dev->lock, flags); - net2280_pullup (&dev->gadget, 0); - - driver->unbind (&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; @@ -2266,9 +2233,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) else dev->gadget.speed = USB_SPEED_FULL; net2280_led_speed (dev, dev->gadget.speed); - DEBUG (dev, "%s speed\n", - (dev->gadget.speed == USB_SPEED_HIGH) - ? "high" : "full"); + DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed)); } ep = &dev->ep [0]; @@ -2481,7 +2446,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED); /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set. - * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and + * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT * only indicates a change in the reset state). */ @@ -2709,8 +2674,6 @@ static void net2280_remove (struct pci_dev *pdev) pci_set_drvdata (pdev, NULL); INFO (dev, "unbind\n"); - - the_controller = NULL; } /* wrap this driver around the specified device, but @@ -2724,14 +2687,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) void __iomem *base = NULL; int retval, i; - /* if you want to support more than one controller in a system, - * usb_gadget_driver_{register,unregister}() must change. - */ - if (the_controller) { - dev_warn (&pdev->dev, "ignoring\n"); - return -EBUSY; - } - /* alloc, and start init */ dev = kzalloc (sizeof *dev, GFP_KERNEL); if (dev == NULL){ @@ -2858,8 +2813,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) use_dma ? (use_dma_chaining ? "chaining" : "enabled") : "disabled"); - the_controller = dev; - retval = device_register (&dev->gadget.dev); if (retval) goto done; retval = device_create_file (&pdev->dev, &dev_attr_registers); diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h index c36852263d93..a844be0d683a 100644 --- a/drivers/usb/gadget/net2280.h +++ b/drivers/usb/gadget/net2280.h @@ -11,15 +11,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/usb/net2280.h> diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 740c7daed279..788989a10223 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -10,15 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #undef DEBUG @@ -166,15 +157,14 @@ static int omap_ep_enable(struct usb_ep *_ep, if (!_ep || !desc || ep->desc || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress - || ep->maxpacket < le16_to_cpu - (desc->wMaxPacketSize)) { + || ep->maxpacket < usb_endpoint_maxp(desc)) { DBG("%s, bad ep or descriptor\n", __func__); return -EINVAL; } - maxp = le16_to_cpu (desc->wMaxPacketSize); + maxp = usb_endpoint_maxp(desc); if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK && maxp != ep->maxpacket) - || le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket + || usb_endpoint_maxp(desc) > ep->maxpacket || !desc->wMaxPacketSize) { DBG("%s, bad %s maxpacket\n", __func__, _ep->name); return -ERANGE; @@ -2968,7 +2958,7 @@ known: } #ifdef USE_ISO status = request_irq(pdev->resource[3].start, omap_udc_iso_irq, - IRQF_DISABLED, "omap_udc iso", udc); + 0, "omap_udc iso", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[3].start, status); diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index f96615ab6b77..550d6dcdf104 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -4,15 +4,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/kernel.h> @@ -947,7 +938,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep, else buff_size = UDC_EPOUT_BUFF_SIZE; pch_udc_ep_set_bufsz(ep, buff_size, ep->in); - pch_udc_ep_set_maxpkt(ep, le16_to_cpu(desc->wMaxPacketSize)); + pch_udc_ep_set_maxpkt(ep, usb_endpoint_maxp(desc)); pch_udc_ep_set_nak(ep); pch_udc_ep_fifo_flush(ep, ep->in); /* Configure the endpoint */ @@ -957,7 +948,7 @@ static void pch_udc_ep_enable(struct pch_udc_ep *ep, (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) | (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) | (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) | - le16_to_cpu(desc->wMaxPacketSize) << UDC_CSR_NE_MAX_PKT_SHIFT; + usb_endpoint_maxp(desc) << UDC_CSR_NE_MAX_PKT_SHIFT; if (ep->in) pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num)); @@ -1466,7 +1457,7 @@ static int pch_udc_pcd_ep_enable(struct usb_ep *usbep, ep->desc = desc; ep->halted = 0; pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc); - ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp(desc); pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); spin_unlock_irqrestore(&dev->lock, iflags); return 0; diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index a341dde6f9c3..65a8834f274b 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/module.h> @@ -971,23 +962,15 @@ printer_set_config(struct printer_dev *dev, unsigned number) usb_gadget_vbus_draw(dev->gadget, dev->gadget->is_otg ? 8 : 100); } else { - char *speed; unsigned power; power = 2 * config_desc.bMaxPower; usb_gadget_vbus_draw(dev->gadget, power); - switch (gadget->speed) { - case USB_SPEED_FULL: speed = "full"; break; -#ifdef CONFIG_USB_GADGET_DUALSPEED - case USB_SPEED_HIGH: speed = "high"; break; -#endif - default: speed = "?"; break; - } - dev->config = number; - INFO(dev, "%s speed config #%d: %d mA, %s\n", - speed, number, power, driver_desc); + INFO(dev, "%s config #%d: %d mA, %s\n", + usb_speed_string(gadget->speed), + number, power, driver_desc); } return result; } @@ -1611,7 +1594,7 @@ cleanup(void) if (status) ERROR(dev, "usb_gadget_unregister_driver %x\n", status); - unregister_chrdev_region(g_printer_devno, 2); + unregister_chrdev_region(g_printer_devno, 1); class_destroy(usb_gadget_class); mutex_unlock(&usb_printer_gadget.lock_printer_io); } diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index e4e59b4de25d..c090a7e3ecf8 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -11,16 +11,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ /* #define VERBOSE_DEBUG */ @@ -232,8 +222,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, if (!_ep || !desc || ep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress - || ep->fifo_size < le16_to_cpu - (desc->wMaxPacketSize)) { + || ep->fifo_size < usb_endpoint_maxp (desc)) { DMSG("%s, bad ep or descriptor\n", __func__); return -EINVAL; } @@ -248,7 +237,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, /* hardware _could_ do smaller, but driver doesn't */ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && le16_to_cpu (desc->wMaxPacketSize) + && usb_endpoint_maxp (desc) != BULK_FIFO_SIZE) || !desc->wMaxPacketSize) { DMSG("%s, bad %s maxpacket\n", __func__, _ep->name); @@ -264,7 +253,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep, ep->desc = desc; ep->stopped = 0; ep->pio_irqs = 0; - ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp (desc); /* flush fifo (mostly for OUT buffers) */ pxa25x_ep_fifo_flush (_ep); @@ -401,7 +390,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req) { unsigned max; - max = le16_to_cpu(ep->desc->wMaxPacketSize); + max = usb_endpoint_maxp(ep->desc); do { unsigned count; int is_last, is_short; @@ -671,8 +660,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) * we can report per-packet status. that also helps with dma. */ if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC - && req->req.length > le16_to_cpu - (ep->desc->wMaxPacketSize))) + && req->req.length > usb_endpoint_maxp (ep->desc))) return -EMSGSIZE; DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", @@ -1105,7 +1093,7 @@ udc_seq_show(struct seq_file *m, void *_d) tmp = *dev->ep [i].reg_udccs; seq_printf(m, "%s max %d %s udccs %02x irqs %lu\n", - ep->ep.name, le16_to_cpu(desc->wMaxPacketSize), + ep->ep.name, usb_endpoint_maxp(desc), "pio", tmp, ep->pio_irqs); /* TODO translate all five groups of udccs bits! */ @@ -2202,7 +2190,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) /* irq setup after old hardware state is cleaned up */ retval = request_irq(irq, pxa25x_udc_irq, - IRQF_DISABLED, driver_name, dev); + 0, driver_name, dev); if (retval != 0) { pr_err("%s: can't get irq %d, err %d\n", driver_name, irq, retval); @@ -2214,7 +2202,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) if (machine_is_lubbock()) { retval = request_irq(LUBBOCK_USB_DISC_IRQ, lubbock_vbus_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + IRQF_SAMPLE_RANDOM, driver_name, dev); if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", @@ -2223,7 +2211,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) } retval = request_irq(LUBBOCK_USB_IRQ, lubbock_vbus_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + IRQF_SAMPLE_RANDOM, driver_name, dev); if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h index f572c5617462..8eaf4e43726b 100644 --- a/drivers/usb/gadget/pxa25x_udc.h +++ b/drivers/usb/gadget/pxa25x_udc.h @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_USB_GADGET_PXA25X_H @@ -161,8 +152,6 @@ static struct pxa25x_udc *the_controller; #ifdef DEBUG -static int is_vbus_present(void); - static const char *state_name[] = { "EP0_IDLE", "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", @@ -214,8 +203,7 @@ dump_state(struct pxa25x_udc *dev) u32 tmp; unsigned i; - DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", - is_vbus_present() ? "host " : "disconnected", + DMSG("%s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n", state_name[dev->ep0state], UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL); dump_udccr("udccr"); @@ -232,9 +220,6 @@ dump_state(struct pxa25x_udc *dev) } else DMSG("ep0 driver '%s'\n", dev->driver->driver.name); - if (!is_vbus_present()) - return; - dump_udccs0 ("udccs0"); DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n", dev->stats.write.bytes, dev->stats.write.ops, diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 85b68c75dc9d..18b6b091f2a6 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -8,16 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/module.h> #include <linux/kernel.h> @@ -1439,7 +1429,7 @@ static int pxa_ep_enable(struct usb_ep *_ep, return -EINVAL; } - if (ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) { + if (ep->fifo_size < usb_endpoint_maxp(desc)) { ep_err(ep, "bad maxpacket\n"); return -ERANGE; } diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h index b01696eab068..7f4e8f424e80 100644 --- a/drivers/usb/gadget/pxa27x_udc.h +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_USB_GADGET_PXA27X_H diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index 50991e5bd5e8..68a826a1b866 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #include <linux/module.h> @@ -28,13 +18,14 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/slab.h> +#include <linux/dma-mapping.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include "r8a66597-udc.h" -#define DRIVER_VERSION "2009-08-18" +#define DRIVER_VERSION "2011-09-26" static const char udc_name[] = "r8a66597_udc"; static const char *r8a66597_ep_name[] = { @@ -115,13 +106,15 @@ static inline u16 control_reg_get_pid(struct r8a66597 *r8a66597, u16 pipenum) u16 pid = 0; unsigned long offset; - if (pipenum == 0) + if (pipenum == 0) { pid = r8a66597_read(r8a66597, DCPCTR) & PID; - else if (pipenum < R8A66597_MAX_NUM_PIPE) { + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { offset = get_pipectr_addr(pipenum); pid = r8a66597_read(r8a66597, offset) & PID; - } else - printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } return pid; } @@ -131,13 +124,15 @@ static inline void control_reg_set_pid(struct r8a66597 *r8a66597, u16 pipenum, { unsigned long offset; - if (pipenum == 0) + if (pipenum == 0) { r8a66597_mdfy(r8a66597, pid, PID, DCPCTR); - else if (pipenum < R8A66597_MAX_NUM_PIPE) { + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { offset = get_pipectr_addr(pipenum); r8a66597_mdfy(r8a66597, pid, PID, offset); - } else - printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } } static inline void pipe_start(struct r8a66597 *r8a66597, u16 pipenum) @@ -160,13 +155,15 @@ static inline u16 control_reg_get(struct r8a66597 *r8a66597, u16 pipenum) u16 ret = 0; unsigned long offset; - if (pipenum == 0) + if (pipenum == 0) { ret = r8a66597_read(r8a66597, DCPCTR); - else if (pipenum < R8A66597_MAX_NUM_PIPE) { + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { offset = get_pipectr_addr(pipenum); ret = r8a66597_read(r8a66597, offset); - } else - printk(KERN_ERR "unexpect pipe num (%d)\n", pipenum); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } return ret; } @@ -177,13 +174,63 @@ static inline void control_reg_sqclr(struct r8a66597 *r8a66597, u16 pipenum) pipe_stop(r8a66597, pipenum); - if (pipenum == 0) + if (pipenum == 0) { r8a66597_bset(r8a66597, SQCLR, DCPCTR); - else if (pipenum < R8A66597_MAX_NUM_PIPE) { + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { offset = get_pipectr_addr(pipenum); r8a66597_bset(r8a66597, SQCLR, offset); - } else - printk(KERN_ERR "unexpect pipe num(%d)\n", pipenum); + } else { + dev_err(r8a66597_to_dev(r8a66597), "unexpect pipe num (%d)\n", + pipenum); + } +} + +static void control_reg_sqset(struct r8a66597 *r8a66597, u16 pipenum) +{ + unsigned long offset; + + pipe_stop(r8a66597, pipenum); + + if (pipenum == 0) { + r8a66597_bset(r8a66597, SQSET, DCPCTR); + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + r8a66597_bset(r8a66597, SQSET, offset); + } else { + dev_err(r8a66597_to_dev(r8a66597), + "unexpect pipe num(%d)\n", pipenum); + } +} + +static u16 control_reg_sqmon(struct r8a66597 *r8a66597, u16 pipenum) +{ + unsigned long offset; + + if (pipenum == 0) { + return r8a66597_read(r8a66597, DCPCTR) & SQMON; + } else if (pipenum < R8A66597_MAX_NUM_PIPE) { + offset = get_pipectr_addr(pipenum); + return r8a66597_read(r8a66597, offset) & SQMON; + } else { + dev_err(r8a66597_to_dev(r8a66597), + "unexpect pipe num(%d)\n", pipenum); + } + + return 0; +} + +static u16 save_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum) +{ + return control_reg_sqmon(r8a66597, pipenum); +} + +static void restore_usb_toggle(struct r8a66597 *r8a66597, u16 pipenum, + u16 toggle) +{ + if (toggle) + control_reg_sqset(r8a66597, pipenum); + else + control_reg_sqclr(r8a66597, pipenum); } static inline int get_buffer_size(struct r8a66597 *r8a66597, u16 pipenum) @@ -222,18 +269,51 @@ static inline unsigned short mbw_value(struct r8a66597 *r8a66597) return MBW_16; } +static void r8a66597_change_curpipe(struct r8a66597 *r8a66597, u16 pipenum, + u16 isel, u16 fifosel) +{ + u16 tmp, mask, loop; + int i = 0; + + if (!pipenum) { + mask = ISEL | CURPIPE; + loop = isel; + } else { + mask = CURPIPE; + loop = pipenum; + } + r8a66597_mdfy(r8a66597, loop, mask, fifosel); + + do { + tmp = r8a66597_read(r8a66597, fifosel); + if (i++ > 1000000) { + dev_err(r8a66597_to_dev(r8a66597), + "r8a66597: register%x, loop %x " + "is timeout\n", fifosel, loop); + break; + } + ndelay(1); + } while ((tmp & mask) != loop); +} + static inline void pipe_change(struct r8a66597 *r8a66597, u16 pipenum) { struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum]; if (ep->use_dma) - return; + r8a66597_bclr(r8a66597, DREQE, ep->fifosel); r8a66597_mdfy(r8a66597, pipenum, CURPIPE, ep->fifosel); ndelay(450); - r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel); + if (r8a66597_is_sudmac(r8a66597) && ep->use_dma) + r8a66597_bclr(r8a66597, mbw_value(r8a66597), ep->fifosel); + else + r8a66597_bset(r8a66597, mbw_value(r8a66597), ep->fifosel); + + if (ep->use_dma) + r8a66597_bset(r8a66597, DREQE, ep->fifosel); } static int pipe_buffer_setting(struct r8a66597 *r8a66597, @@ -297,17 +377,18 @@ static void pipe_buffer_release(struct r8a66597 *r8a66597, if (info->pipe == 0) return; - if (is_bulk_pipe(info->pipe)) + if (is_bulk_pipe(info->pipe)) { r8a66597->bulk--; - else if (is_interrupt_pipe(info->pipe)) + } else if (is_interrupt_pipe(info->pipe)) { r8a66597->interrupt--; - else if (is_isoc_pipe(info->pipe)) { + } else if (is_isoc_pipe(info->pipe)) { r8a66597->isochronous--; if (info->type == R8A66597_BULK) r8a66597->bulk--; - } else - printk(KERN_ERR "ep_release: unexpect pipenum (%d)\n", - info->pipe); + } else { + dev_err(r8a66597_to_dev(r8a66597), + "ep_release: unexpect pipenum (%d)\n", info->pipe); + } } static void pipe_initialize(struct r8a66597_ep *ep) @@ -337,11 +418,17 @@ static void r8a66597_ep_setting(struct r8a66597 *r8a66597, ep->fifoaddr = CFIFO; ep->fifosel = CFIFOSEL; ep->fifoctr = CFIFOCTR; - ep->fifotrn = 0; ep->pipectr = get_pipectr_addr(pipenum); + if (is_bulk_pipe(pipenum) || is_isoc_pipe(pipenum)) { + ep->pipetre = get_pipetre_addr(pipenum); + ep->pipetrn = get_pipetrn_addr(pipenum); + } else { + ep->pipetre = 0; + ep->pipetrn = 0; + } ep->pipenum = pipenum; - ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + ep->ep.maxpacket = usb_endpoint_maxp(desc); r8a66597->pipenum2ep[pipenum] = ep; r8a66597->epaddr2ep[desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK] = ep; @@ -381,7 +468,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, case USB_ENDPOINT_XFER_BULK: if (r8a66597->bulk >= R8A66597_MAX_NUM_BULK) { if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) { - printk(KERN_ERR "bulk pipe is insufficient\n"); + dev_err(r8a66597_to_dev(r8a66597), + "bulk pipe is insufficient\n"); return -ENODEV; } else { info.pipe = R8A66597_BASE_PIPENUM_ISOC @@ -397,7 +485,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, break; case USB_ENDPOINT_XFER_INT: if (r8a66597->interrupt >= R8A66597_MAX_NUM_INT) { - printk(KERN_ERR "interrupt pipe is insufficient\n"); + dev_err(r8a66597_to_dev(r8a66597), + "interrupt pipe is insufficient\n"); return -ENODEV; } info.pipe = R8A66597_BASE_PIPENUM_INT + r8a66597->interrupt; @@ -406,7 +495,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, break; case USB_ENDPOINT_XFER_ISOC: if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) { - printk(KERN_ERR "isochronous pipe is insufficient\n"); + dev_err(r8a66597_to_dev(r8a66597), + "isochronous pipe is insufficient\n"); return -ENODEV; } info.pipe = R8A66597_BASE_PIPENUM_ISOC + r8a66597->isochronous; @@ -414,13 +504,13 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, counter = &r8a66597->isochronous; break; default: - printk(KERN_ERR "unexpect xfer type\n"); + dev_err(r8a66597_to_dev(r8a66597), "unexpect xfer type\n"); return -EINVAL; } ep->type = info.type; info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - info.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + info.maxpacket = usb_endpoint_maxp(desc); info.interval = desc->bInterval; if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) info.dir_in = 1; @@ -429,7 +519,8 @@ static int alloc_pipe_config(struct r8a66597_ep *ep, ret = pipe_buffer_setting(r8a66597, &info); if (ret < 0) { - printk(KERN_ERR "pipe_buffer_setting fail\n"); + dev_err(r8a66597_to_dev(r8a66597), + "pipe_buffer_setting fail\n"); return ret; } @@ -495,6 +586,124 @@ static void start_ep0_write(struct r8a66597_ep *ep, } } +static void disable_fifosel(struct r8a66597 *r8a66597, u16 pipenum, + u16 fifosel) +{ + u16 tmp; + + tmp = r8a66597_read(r8a66597, fifosel) & CURPIPE; + if (tmp == pipenum) + r8a66597_change_curpipe(r8a66597, 0, 0, fifosel); +} + +static void change_bfre_mode(struct r8a66597 *r8a66597, u16 pipenum, + int enable) +{ + struct r8a66597_ep *ep = r8a66597->pipenum2ep[pipenum]; + u16 tmp, toggle; + + /* check current BFRE bit */ + r8a66597_write(r8a66597, pipenum, PIPESEL); + tmp = r8a66597_read(r8a66597, PIPECFG) & R8A66597_BFRE; + if ((enable && tmp) || (!enable && !tmp)) + return; + + /* change BFRE bit */ + pipe_stop(r8a66597, pipenum); + disable_fifosel(r8a66597, pipenum, CFIFOSEL); + disable_fifosel(r8a66597, pipenum, D0FIFOSEL); + disable_fifosel(r8a66597, pipenum, D1FIFOSEL); + + toggle = save_usb_toggle(r8a66597, pipenum); + + r8a66597_write(r8a66597, pipenum, PIPESEL); + if (enable) + r8a66597_bset(r8a66597, R8A66597_BFRE, PIPECFG); + else + r8a66597_bclr(r8a66597, R8A66597_BFRE, PIPECFG); + + /* initialize for internal BFRE flag */ + r8a66597_bset(r8a66597, ACLRM, ep->pipectr); + r8a66597_bclr(r8a66597, ACLRM, ep->pipectr); + + restore_usb_toggle(r8a66597, pipenum, toggle); +} + +static int sudmac_alloc_channel(struct r8a66597 *r8a66597, + struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + struct r8a66597_dma *dma; + + if (!r8a66597_is_sudmac(r8a66597)) + return -ENODEV; + + /* Check transfer type */ + if (!is_bulk_pipe(ep->pipenum)) + return -EIO; + + if (r8a66597->dma.used) + return -EBUSY; + + /* set SUDMAC parameters */ + dma = &r8a66597->dma; + dma->used = 1; + if (ep->desc->bEndpointAddress & USB_DIR_IN) { + dma->dir = 1; + } else { + dma->dir = 0; + change_bfre_mode(r8a66597, ep->pipenum, 1); + } + + /* set r8a66597_ep paramters */ + ep->use_dma = 1; + ep->dma = dma; + ep->fifoaddr = D0FIFO; + ep->fifosel = D0FIFOSEL; + ep->fifoctr = D0FIFOCTR; + + /* dma mapping */ + req->req.dma = dma_map_single(r8a66597_to_dev(ep->r8a66597), + req->req.buf, req->req.length, + dma->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + return 0; +} + +static void sudmac_free_channel(struct r8a66597 *r8a66597, + struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + if (!r8a66597_is_sudmac(r8a66597)) + return; + + dma_unmap_single(r8a66597_to_dev(ep->r8a66597), + req->req.dma, req->req.length, + ep->dma->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + r8a66597_bclr(r8a66597, DREQE, ep->fifosel); + r8a66597_change_curpipe(r8a66597, 0, 0, ep->fifosel); + + ep->dma->used = 0; + ep->use_dma = 0; + ep->fifoaddr = CFIFO; + ep->fifosel = CFIFOSEL; + ep->fifoctr = CFIFOCTR; +} + +static void sudmac_start(struct r8a66597 *r8a66597, struct r8a66597_ep *ep, + struct r8a66597_request *req) +{ + BUG_ON(req->req.length == 0); + + r8a66597_sudmac_write(r8a66597, LBA_WAIT, CH0CFG); + r8a66597_sudmac_write(r8a66597, req->req.dma, CH0BA); + r8a66597_sudmac_write(r8a66597, req->req.length, CH0BBC); + r8a66597_sudmac_write(r8a66597, CH0ENDE, DINTCTRL); + + r8a66597_sudmac_write(r8a66597, DEN, CH0DEN); +} + static void start_packet_write(struct r8a66597_ep *ep, struct r8a66597_request *req) { @@ -505,11 +714,29 @@ static void start_packet_write(struct r8a66597_ep *ep, disable_irq_empty(r8a66597, ep->pipenum); pipe_start(r8a66597, ep->pipenum); - tmp = r8a66597_read(r8a66597, ep->fifoctr); - if (unlikely((tmp & FRDY) == 0)) - pipe_irq_enable(r8a66597, ep->pipenum); - else - irq_packet_write(ep, req); + if (req->req.length == 0) { + transfer_complete(ep, req, 0); + } else { + r8a66597_write(r8a66597, ~(1 << ep->pipenum), BRDYSTS); + if (sudmac_alloc_channel(r8a66597, ep, req) < 0) { + /* PIO mode */ + pipe_change(r8a66597, ep->pipenum); + disable_irq_empty(r8a66597, ep->pipenum); + pipe_start(r8a66597, ep->pipenum); + tmp = r8a66597_read(r8a66597, ep->fifoctr); + if (unlikely((tmp & FRDY) == 0)) + pipe_irq_enable(r8a66597, ep->pipenum); + else + irq_packet_write(ep, req); + } else { + /* DMA mode */ + pipe_change(r8a66597, ep->pipenum); + disable_irq_nrdy(r8a66597, ep->pipenum); + pipe_start(r8a66597, ep->pipenum); + enable_irq_nrdy(r8a66597, ep->pipenum); + sudmac_start(r8a66597, ep, req); + } + } } static void start_packet_read(struct r8a66597_ep *ep, @@ -524,17 +751,26 @@ static void start_packet_read(struct r8a66597_ep *ep, pipe_start(r8a66597, pipenum); pipe_irq_enable(r8a66597, pipenum); } else { - if (ep->use_dma) { - r8a66597_bset(r8a66597, TRCLR, ep->fifosel); - pipe_change(r8a66597, pipenum); - r8a66597_bset(r8a66597, TRENB, ep->fifosel); + pipe_stop(r8a66597, pipenum); + if (ep->pipetre) { + enable_irq_nrdy(r8a66597, pipenum); + r8a66597_write(r8a66597, TRCLR, ep->pipetre); r8a66597_write(r8a66597, - (req->req.length + ep->ep.maxpacket - 1) - / ep->ep.maxpacket, - ep->fifotrn); + DIV_ROUND_UP(req->req.length, ep->ep.maxpacket), + ep->pipetrn); + r8a66597_bset(r8a66597, TRENB, ep->pipetre); + } + + if (sudmac_alloc_channel(r8a66597, ep, req) < 0) { + /* PIO mode */ + change_bfre_mode(r8a66597, ep->pipenum, 0); + pipe_start(r8a66597, pipenum); /* trigger once */ + pipe_irq_enable(r8a66597, pipenum); + } else { + pipe_change(r8a66597, pipenum); + sudmac_start(r8a66597, ep, req); + pipe_start(r8a66597, pipenum); /* trigger once */ } - pipe_start(r8a66597, pipenum); /* trigger once */ - pipe_irq_enable(r8a66597, pipenum); } } @@ -564,7 +800,8 @@ static void start_ep0(struct r8a66597_ep *ep, struct r8a66597_request *req) control_end(ep->r8a66597, 0); break; default: - printk(KERN_ERR "start_ep0: unexpect ctsq(%x)\n", ctsq); + dev_err(r8a66597_to_dev(ep->r8a66597), + "start_ep0: unexpect ctsq(%x)\n", ctsq); break; } } @@ -690,6 +927,9 @@ __acquires(r8a66597->lock) if (!list_empty(&ep->queue)) restart = 1; + if (ep->use_dma) + sudmac_free_channel(ep->r8a66597, ep, req); + spin_unlock(&ep->r8a66597->lock); req->req.complete(&ep->ep, &req->req); spin_lock(&ep->r8a66597->lock); @@ -718,7 +958,8 @@ static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req) do { tmp = r8a66597_read(r8a66597, ep->fifoctr); if (i++ > 100000) { - printk(KERN_ERR "pipe0 is busy. maybe cpu i/o bus" + dev_err(r8a66597_to_dev(r8a66597), + "pipe0 is busy. maybe cpu i/o bus " "conflict. please power off this controller."); return; } @@ -733,7 +974,7 @@ static void irq_ep0_write(struct r8a66597_ep *ep, struct r8a66597_request *req) /* write fifo */ if (req->req.buf) { if (size > 0) - r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size); + r8a66597_write_fifo(r8a66597, ep, buf, size); if ((size == 0) || ((size % ep->ep.maxpacket) != 0)) r8a66597_bset(r8a66597, BVAL, ep->fifoctr); } @@ -769,7 +1010,8 @@ static void irq_packet_write(struct r8a66597_ep *ep, if (unlikely((tmp & FRDY) == 0)) { pipe_stop(r8a66597, pipenum); pipe_irq_disable(r8a66597, pipenum); - printk(KERN_ERR "write fifo not ready. pipnum=%d\n", pipenum); + dev_err(r8a66597_to_dev(r8a66597), + "write fifo not ready. pipnum=%d\n", pipenum); return; } @@ -780,7 +1022,7 @@ static void irq_packet_write(struct r8a66597_ep *ep, /* write fifo */ if (req->req.buf) { - r8a66597_write_fifo(r8a66597, ep->fifoaddr, buf, size); + r8a66597_write_fifo(r8a66597, ep, buf, size); if ((size == 0) || ((size % ep->ep.maxpacket) != 0) || ((bufsize != ep->ep.maxpacket) @@ -819,7 +1061,7 @@ static void irq_packet_read(struct r8a66597_ep *ep, req->req.status = -EPIPE; pipe_stop(r8a66597, pipenum); pipe_irq_disable(r8a66597, pipenum); - printk(KERN_ERR "read fifo not ready"); + dev_err(r8a66597_to_dev(r8a66597), "read fifo not ready"); return; } @@ -1095,7 +1337,7 @@ static void r8a66597_update_usb_speed(struct r8a66597 *r8a66597) break; default: r8a66597->gadget.speed = USB_SPEED_UNKNOWN; - printk(KERN_ERR "USB speed unknown\n"); + dev_err(r8a66597_to_dev(r8a66597), "USB speed unknown\n"); } } @@ -1158,11 +1400,71 @@ __acquires(r8a66597->lock) control_end(r8a66597, 0); break; default: - printk(KERN_ERR "ctrl_stage: unexpect ctsq(%x)\n", ctsq); + dev_err(r8a66597_to_dev(r8a66597), + "ctrl_stage: unexpect ctsq(%x)\n", ctsq); break; } } +static void sudmac_finish(struct r8a66597 *r8a66597, struct r8a66597_ep *ep) +{ + u16 pipenum; + struct r8a66597_request *req; + u32 len; + int i = 0; + + pipenum = ep->pipenum; + pipe_change(r8a66597, pipenum); + + while (!(r8a66597_read(r8a66597, ep->fifoctr) & FRDY)) { + udelay(1); + if (unlikely(i++ >= 10000)) { /* timeout = 10 msec */ + dev_err(r8a66597_to_dev(r8a66597), + "%s: FRDY was not set (%d)\n", + __func__, pipenum); + return; + } + } + + r8a66597_bset(r8a66597, BCLR, ep->fifoctr); + req = get_request_from_ep(ep); + + /* prepare parameters */ + len = r8a66597_sudmac_read(r8a66597, CH0CBC); + req->req.actual += len; + + /* clear */ + r8a66597_sudmac_write(r8a66597, CH0STCLR, DSTSCLR); + + /* check transfer finish */ + if ((!req->req.zero && (req->req.actual == req->req.length)) + || (len % ep->ep.maxpacket)) { + if (ep->dma->dir) { + disable_irq_ready(r8a66597, pipenum); + enable_irq_empty(r8a66597, pipenum); + } else { + /* Clear the interrupt flag for next transfer */ + r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS); + transfer_complete(ep, req, 0); + } + } +} + +static void r8a66597_sudmac_irq(struct r8a66597 *r8a66597) +{ + u32 irqsts; + struct r8a66597_ep *ep; + u16 pipenum; + + irqsts = r8a66597_sudmac_read(r8a66597, DINTSTS); + if (irqsts & CH0ENDS) { + r8a66597_sudmac_write(r8a66597, CH0ENDC, DINTSTSCLR); + pipenum = (r8a66597_read(r8a66597, D0FIFOSEL) & CURPIPE); + ep = r8a66597->pipenum2ep[pipenum]; + sudmac_finish(r8a66597, ep); + } +} + static irqreturn_t r8a66597_irq(int irq, void *_r8a66597) { struct r8a66597 *r8a66597 = _r8a66597; @@ -1173,6 +1475,9 @@ static irqreturn_t r8a66597_irq(int irq, void *_r8a66597) u16 savepipe; u16 mask0; + if (r8a66597_is_sudmac(r8a66597)) + r8a66597_sudmac_irq(r8a66597); + spin_lock(&r8a66597->lock); intsts0 = r8a66597_read(r8a66597, INTSTS0); @@ -1433,23 +1738,18 @@ static struct usb_ep_ops r8a66597_ep_ops = { }; /*-------------------------------------------------------------------------*/ -static struct r8a66597 *the_controller; - -static int r8a66597_start(struct usb_gadget_driver *driver, - int (*bind)(struct usb_gadget *)) +static int r8a66597_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct r8a66597 *r8a66597 = the_controller; + struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); int retval; if (!driver || driver->speed != USB_SPEED_HIGH - || !bind || !driver->setup) return -EINVAL; if (!r8a66597) return -ENODEV; - if (r8a66597->driver) - return -EBUSY; /* hook up the driver */ driver->driver.bus = NULL; @@ -1458,14 +1758,8 @@ static int r8a66597_start(struct usb_gadget_driver *driver, retval = device_add(&r8a66597->gadget.dev); if (retval) { - printk(KERN_ERR "device_add error (%d)\n", retval); - goto error; - } - - retval = bind(&r8a66597->gadget); - if (retval) { - printk(KERN_ERR "bind to driver error (%d)\n", retval); - device_del(&r8a66597->gadget.dev); + dev_err(r8a66597_to_dev(r8a66597), "device_add error (%d)\n", + retval); goto error; } @@ -1489,23 +1783,17 @@ error: return retval; } -static int r8a66597_stop(struct usb_gadget_driver *driver) +static int r8a66597_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) { - struct r8a66597 *r8a66597 = the_controller; + struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget); unsigned long flags; - if (driver != r8a66597->driver || !driver->unbind) - return -EINVAL; - spin_lock_irqsave(&r8a66597->lock, flags); - if (r8a66597->gadget.speed != USB_SPEED_UNKNOWN) - r8a66597_usb_disconnect(r8a66597); r8a66597_bclr(r8a66597, VBSE, INTENB0); disable_controller(r8a66597); spin_unlock_irqrestore(&r8a66597->lock, flags); - driver->unbind(&r8a66597->gadget); - device_del(&r8a66597->gadget.dev); r8a66597->driver = NULL; return 0; @@ -1535,8 +1823,8 @@ static int r8a66597_pullup(struct usb_gadget *gadget, int is_on) static struct usb_gadget_ops r8a66597_gadget_ops = { .get_frame = r8a66597_get_frame, - .start = r8a66597_start, - .stop = r8a66597_stop, + .udc_start = r8a66597_start, + .udc_stop = r8a66597_stop, .pullup = r8a66597_pullup, }; @@ -1547,6 +1835,8 @@ static int __exit r8a66597_remove(struct platform_device *pdev) usb_del_gadget_udc(&r8a66597->gadget); del_timer_sync(&r8a66597->timer); iounmap(r8a66597->reg); + if (r8a66597->pdata->sudmac) + iounmap(r8a66597->sudmac_reg); free_irq(platform_get_irq(pdev, 0), r8a66597); r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req); #ifdef CONFIG_HAVE_CLK @@ -1563,6 +1853,26 @@ static void nop_completion(struct usb_ep *ep, struct usb_request *r) { } +static int __init r8a66597_sudmac_ioremap(struct r8a66597 *r8a66597, + struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sudmac"); + if (!res) { + dev_err(&pdev->dev, "platform_get_resource error(sudmac).\n"); + return -ENODEV; + } + + r8a66597->sudmac_reg = ioremap(res->start, resource_size(res)); + if (r8a66597->sudmac_reg == NULL) { + dev_err(&pdev->dev, "ioremap error(sudmac).\n"); + return -ENOMEM; + } + + return 0; +} + static int __init r8a66597_probe(struct platform_device *pdev) { #ifdef CONFIG_HAVE_CLK @@ -1579,7 +1889,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { ret = -ENODEV; - printk(KERN_ERR "platform_get_resource error.\n"); + dev_err(&pdev->dev, "platform_get_resource error.\n"); goto clean_up; } @@ -1589,14 +1899,14 @@ static int __init r8a66597_probe(struct platform_device *pdev) if (irq < 0) { ret = -ENODEV; - printk(KERN_ERR "platform_get_irq error.\n"); + dev_err(&pdev->dev, "platform_get_irq error.\n"); goto clean_up; } reg = ioremap(res->start, resource_size(res)); if (reg == NULL) { ret = -ENOMEM; - printk(KERN_ERR "ioremap error.\n"); + dev_err(&pdev->dev, "ioremap error.\n"); goto clean_up; } @@ -1604,7 +1914,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597 = kzalloc(sizeof(struct r8a66597), GFP_KERNEL); if (r8a66597 == NULL) { ret = -ENOMEM; - printk(KERN_ERR "kzalloc error\n"); + dev_err(&pdev->dev, "kzalloc error\n"); goto clean_up; } @@ -1640,13 +1950,18 @@ static int __init r8a66597_probe(struct platform_device *pdev) clk_enable(r8a66597->clk); } #endif + if (r8a66597->pdata->sudmac) { + ret = r8a66597_sudmac_ioremap(r8a66597, pdev); + if (ret < 0) + goto clean_up2; + } disable_controller(r8a66597); /* make sure controller is disabled */ - ret = request_irq(irq, r8a66597_irq, IRQF_DISABLED | IRQF_SHARED, + ret = request_irq(irq, r8a66597_irq, IRQF_SHARED, udc_name, r8a66597); if (ret < 0) { - printk(KERN_ERR "request_irq error (%d)\n", ret); + dev_err(&pdev->dev, "request_irq error (%d)\n", ret); goto clean_up2; } @@ -1672,13 +1987,10 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597->ep[0].fifoaddr = CFIFO; r8a66597->ep[0].fifosel = CFIFOSEL; r8a66597->ep[0].fifoctr = CFIFOCTR; - r8a66597->ep[0].fifotrn = 0; r8a66597->ep[0].pipectr = get_pipectr_addr(0); r8a66597->pipenum2ep[0] = &r8a66597->ep[0]; r8a66597->epaddr2ep[0] = &r8a66597->ep[0]; - the_controller = r8a66597; - r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep, GFP_KERNEL); if (r8a66597->ep0_req == NULL) @@ -1705,6 +2017,8 @@ clean_up2: #endif clean_up: if (r8a66597) { + if (r8a66597->sudmac_reg) + iounmap(r8a66597->sudmac_reg); if (r8a66597->ep0_req) r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req); diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h index 503f766c23a7..8e3de61cd4b8 100644 --- a/drivers/usb/gadget/r8a66597-udc.h +++ b/drivers/usb/gadget/r8a66597-udc.h @@ -8,16 +8,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * */ #ifndef __R8A66597_H__ @@ -53,6 +43,7 @@ ((pipenum >= R8A66597_BASE_PIPENUM_ISOC) && \ (pipenum < (R8A66597_BASE_PIPENUM_ISOC + R8A66597_MAX_NUM_ISOC))) +#define r8a66597_is_sudmac(r8a66597) (r8a66597->pdata->sudmac) struct r8a66597_pipe_info { u16 pipe; u16 epnum; @@ -70,6 +61,7 @@ struct r8a66597_request { struct r8a66597_ep { struct usb_ep ep; struct r8a66597 *r8a66597; + struct r8a66597_dma *dma; struct list_head queue; unsigned busy:1; @@ -85,13 +77,20 @@ struct r8a66597_ep { unsigned char fifoaddr; unsigned char fifosel; unsigned char fifoctr; - unsigned char fifotrn; unsigned char pipectr; + unsigned char pipetre; + unsigned char pipetrn; +}; + +struct r8a66597_dma { + unsigned used:1; + unsigned dir:1; /* 1 = IN(write), 0 = OUT(read) */ }; struct r8a66597 { spinlock_t lock; void __iomem *reg; + void __iomem *sudmac_reg; #ifdef CONFIG_HAVE_CLK struct clk *clk; @@ -104,6 +103,7 @@ struct r8a66597 { struct r8a66597_ep ep[R8A66597_MAX_NUM_PIPE]; struct r8a66597_ep *pipenum2ep[R8A66597_MAX_NUM_PIPE]; struct r8a66597_ep *epaddr2ep[16]; + struct r8a66597_dma dma; struct timer_list timer; struct usb_request *ep0_req; /* for internal request */ @@ -124,6 +124,7 @@ struct r8a66597 { #define gadget_to_r8a66597(_gadget) \ container_of(_gadget, struct r8a66597, gadget) #define r8a66597_to_gadget(r8a66597) (&r8a66597->gadget) +#define r8a66597_to_dev(r8a66597) (r8a66597->gadget.dev.parent) static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset) { @@ -182,12 +183,27 @@ static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val, iowrite16(val, r8a66597->reg + offset); } +static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, + u16 val, u16 pat, unsigned long offset) +{ + u16 tmp; + tmp = r8a66597_read(r8a66597, offset); + tmp = tmp & (~pat); + tmp = tmp | val; + r8a66597_write(r8a66597, tmp, offset); +} + +#define r8a66597_bclr(r8a66597, val, offset) \ + r8a66597_mdfy(r8a66597, 0, val, offset) +#define r8a66597_bset(r8a66597, val, offset) \ + r8a66597_mdfy(r8a66597, val, 0, offset) + static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, - unsigned long offset, + struct r8a66597_ep *ep, unsigned char *buf, int len) { - void __iomem *fifoaddr = r8a66597->reg + offset; + void __iomem *fifoaddr = r8a66597->reg + ep->fifoaddr; int adj = 0; int i; @@ -215,18 +231,12 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597, adj = 0x01; /* 16-bit wide */ } + if (r8a66597->pdata->wr0_shorted_to_wr1) + r8a66597_bclr(r8a66597, MBW_16, ep->fifosel); for (i = 0; i < len; i++) iowrite8(buf[i], fifoaddr + adj - (i & adj)); -} - -static inline void r8a66597_mdfy(struct r8a66597 *r8a66597, - u16 val, u16 pat, unsigned long offset) -{ - u16 tmp; - tmp = r8a66597_read(r8a66597, offset); - tmp = tmp & (~pat); - tmp = tmp | val; - r8a66597_write(r8a66597, tmp, offset); + if (r8a66597->pdata->wr0_shorted_to_wr1) + r8a66597_bclr(r8a66597, MBW_16, ep->fifosel); } static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata) @@ -251,12 +261,21 @@ static inline u16 get_xtal_from_pdata(struct r8a66597_platdata *pdata) return clock; } -#define r8a66597_bclr(r8a66597, val, offset) \ - r8a66597_mdfy(r8a66597, 0, val, offset) -#define r8a66597_bset(r8a66597, val, offset) \ - r8a66597_mdfy(r8a66597, val, 0, offset) +static inline u32 r8a66597_sudmac_read(struct r8a66597 *r8a66597, + unsigned long offset) +{ + return ioread32(r8a66597->sudmac_reg + offset); +} + +static inline void r8a66597_sudmac_write(struct r8a66597 *r8a66597, u32 val, + unsigned long offset) +{ + iowrite32(val, r8a66597->sudmac_reg + offset); +} #define get_pipectr_addr(pipenum) (PIPE1CTR + (pipenum - 1) * 2) +#define get_pipetre_addr(pipenum) (PIPE1TRE + (pipenum - 1) * 4) +#define get_pipetrn_addr(pipenum) (PIPE1TRN + (pipenum - 1) * 4) #define enable_irq_ready(r8a66597, pipenum) \ enable_pipe_irq(r8a66597, pipenum, BRDYENB) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 8bdee67ce09a..a552453dc946 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1951,30 +1951,26 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg) case S3C_DSTS_EnumSpd_FS: case S3C_DSTS_EnumSpd_FS48: hsotg->gadget.speed = USB_SPEED_FULL; - dev_info(hsotg->dev, "new device is full-speed\n"); - ep0_mps = EP0_MPS_LIMIT; ep_mps = 64; break; case S3C_DSTS_EnumSpd_HS: - dev_info(hsotg->dev, "new device is high-speed\n"); hsotg->gadget.speed = USB_SPEED_HIGH; - ep0_mps = EP0_MPS_LIMIT; ep_mps = 512; break; case S3C_DSTS_EnumSpd_LS: hsotg->gadget.speed = USB_SPEED_LOW; - dev_info(hsotg->dev, "new device is low-speed\n"); - /* note, we don't actually support LS in this driver at the * moment, and the documentation seems to imply that it isn't * supported by the PHYs on some of the devices. */ break; } + dev_info(hsotg->dev, "new device is %s\n", + usb_speed_string(hsotg->gadget.speed)); /* we should now know the maximum packet size for an * endpoint, so set the endpoints to a default value. */ @@ -2297,7 +2293,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, return -EINVAL; } - mps = le16_to_cpu(desc->wMaxPacketSize); + mps = usb_endpoint_maxp(desc); /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */ diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 3fa717c5f4bc..8d54f893cefe 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -26,6 +26,7 @@ #include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/usb/otg.h> #include <linux/prefetch.h> #include <mach/regs-s3c2443-clock.h> @@ -137,6 +138,7 @@ struct s3c_hsudc { struct usb_gadget_driver *driver; struct device *dev; struct s3c24xx_hsudc_platdata *pd; + struct otg_transceiver *transceiver; spinlock_t lock; void __iomem *regs; struct resource *mem_rsrc; @@ -759,11 +761,11 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, if (!_ep || !desc || hsep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || hsep->bEndpointAddress != desc->bEndpointAddress - || ep_maxpacket(hsep) < le16_to_cpu(desc->wMaxPacketSize)) + || ep_maxpacket(hsep) < usb_endpoint_maxp(desc)) return -EINVAL; if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(hsep)) + && usb_endpoint_maxp(desc) != ep_maxpacket(hsep)) || !desc->wMaxPacketSize) return -ERANGE; @@ -779,7 +781,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep, hsep->stopped = hsep->wedge = 0; hsep->desc = desc; - hsep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + hsep->ep.maxpacket = usb_endpoint_maxp(desc); s3c_hsudc_set_halt(_ep, 0); __set_bit(ep_index(hsep), hsudc->regs + S3C_EIER); @@ -1171,6 +1173,22 @@ static int s3c_hsudc_start(struct usb_gadget_driver *driver, return ret; } + /* connect to bus through transceiver */ + if (hsudc->transceiver) { + ret = otg_set_peripheral(hsudc->transceiver, &hsudc->gadget); + if (ret) { + dev_err(hsudc->dev, "%s: can't bind to transceiver\n", + hsudc->gadget.name); + driver->unbind(&hsudc->gadget); + + device_del(&hsudc->gadget.dev); + + hsudc->driver = NULL; + hsudc->gadget.dev.driver = NULL; + return ret; + } + } + enable_irq(hsudc->irq); dev_info(hsudc->dev, "bound driver %s\n", driver->driver.name); @@ -1201,6 +1219,9 @@ static int s3c_hsudc_stop(struct usb_gadget_driver *driver) s3c_hsudc_stop_activity(hsudc, driver); spin_unlock_irqrestore(&hsudc->lock, flags); + if (hsudc->transceiver) + (void) otg_set_peripheral(hsudc->transceiver, NULL); + driver->unbind(&hsudc->gadget); device_del(&hsudc->gadget.dev); disable_irq(hsudc->irq); @@ -1220,10 +1241,24 @@ static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget) return s3c_hsudc_read_frameno(to_hsudc(gadget)); } +static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + struct s3c_hsudc *hsudc = the_controller; + + if (!hsudc) + return -ENODEV; + + if (hsudc->transceiver) + return otg_set_power(hsudc->transceiver, mA); + + return -EOPNOTSUPP; +} + static struct usb_gadget_ops s3c_hsudc_gadget_ops = { .get_frame = s3c_hsudc_gadget_getframe, .start = s3c_hsudc_start, .stop = s3c_hsudc_stop, + .vbus_draw = s3c_hsudc_vbus_draw, }; static int s3c_hsudc_probe(struct platform_device *pdev) @@ -1247,6 +1282,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) hsudc->dev = dev; hsudc->pd = pdev->dev.platform_data; + hsudc->transceiver = otg_get_transceiver(); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "unable to obtain driver resource data\n"); @@ -1269,19 +1306,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev) goto err_remap; } - ret = platform_get_irq(pdev, 0); - if (ret < 0) { - dev_err(dev, "unable to obtain IRQ number\n"); - goto err_irq; - } - hsudc->irq = ret; - - ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc); - if (ret < 0) { - dev_err(dev, "irq request failed\n"); - goto err_irq; - } - spin_lock_init(&hsudc->lock); device_initialize(&hsudc->gadget.dev); @@ -1299,6 +1323,19 @@ static int s3c_hsudc_probe(struct platform_device *pdev) s3c_hsudc_setup_ep(hsudc); + ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(dev, "unable to obtain IRQ number\n"); + goto err_irq; + } + hsudc->irq = ret; + + ret = request_irq(hsudc->irq, s3c_hsudc_irq, 0, driver_name, hsudc); + if (ret < 0) { + dev_err(dev, "irq request failed\n"); + goto err_irq; + } + hsudc->uclk = clk_get(&pdev->dev, "usb-device"); if (IS_ERR(hsudc->uclk)) { dev_err(dev, "failed to find usb-device clock source\n"); diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 8d31848aab09..b8643771fa80 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -10,16 +10,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <linux/module.h> @@ -1082,7 +1072,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep, if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff; + max = usb_endpoint_maxp(desc) & 0x1fff; local_irq_save (flags); _ep->maxpacket = max & 0x7ff; @@ -1903,7 +1893,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) /* irq setup after old hardware state is cleaned up */ retval = request_irq(IRQ_USBD, s3c2410_udc_irq, - IRQF_DISABLED, gadget_name, udc); + 0, gadget_name, udc); if (retval != 0) { dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval); @@ -1927,7 +1917,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev) } retval = request_irq(irq, s3c2410_udc_vbus_irq, - IRQF_DISABLED | IRQF_TRIGGER_RISING + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED, gadget_name, udc); diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/s3c2410_udc.h index 9e0bece4f241..a48f619cb1cc 100644 --- a/drivers/usb/gadget/s3c2410_udc.h +++ b/drivers/usb/gadget/s3c2410_udc.h @@ -9,16 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #ifndef _S3C2410_UDC_H diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index d3dd227a2bfc..c7f291a331df 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ @@ -52,6 +43,12 @@ * characters rather then a pointer to void. */ +/* + * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers + * sets the number of pipeline buffers (length of the fsg_buffhd array). + * The valid range of num_buffers is: num >= 2 && num <= 4. + */ + #include <linux/usb/storage.h> #include <scsi/scsi.h> @@ -247,6 +244,8 @@ struct fsg_lun { u32 sense_data_info; u32 unit_attention_data; + unsigned int blkbits; /* Bits of logical block size of bound block device */ + unsigned int blksize; /* logical block size of bound block device */ struct device dev; }; @@ -262,8 +261,31 @@ static struct fsg_lun *fsg_lun_from_dev(struct device *dev) #define EP0_BUFSIZE 256 #define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ -/* Number of buffers we will use. 2 is enough for double-buffering */ -#define FSG_NUM_BUFFERS 2 +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS; +module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO); +MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers"); + +#else + +/* + * Number of buffers we will use. + * 2 is usually enough for good buffering pipeline + */ +#define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS + +#endif /* CONFIG_USB_DEBUG */ + +/* check if fsg_num_buffers is within a valid range */ +static inline int fsg_num_buffers_validate(void) +{ + if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4) + return 0; + pr_err("fsg_num_buffers %u is out of range (%d to %d)\n", + fsg_num_buffers, 2 ,4); + return -EINVAL; +} /* Default size of buffer length. */ #define FSG_BUFLEN ((u32)16384) @@ -493,12 +515,128 @@ static struct usb_descriptor_header *fsg_hs_function[] = { NULL, }; +static struct usb_endpoint_descriptor +fsg_ss_bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = { + .bLength = sizeof(fsg_ss_bulk_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /*.bMaxBurst = DYNAMIC, */ +}; + +static struct usb_endpoint_descriptor +fsg_ss_bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = { + .bLength = sizeof(fsg_ss_bulk_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /*.bMaxBurst = DYNAMIC, */ +}; + +#ifndef FSG_NO_INTR_EP + +static struct usb_endpoint_descriptor +fsg_ss_intr_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(2), + .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */ +}; + +static struct usb_ss_ep_comp_descriptor fsg_ss_intr_in_comp_desc = { + .bLength = sizeof(fsg_ss_bulk_in_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + .wBytesPerInterval = cpu_to_le16(2), +}; + +#ifndef FSG_NO_OTG +# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 2 +#else +# define FSG_SS_FUNCTION_PRE_EP_ENTRIES 1 +#endif + +#endif + +static __maybe_unused struct usb_ext_cap_descriptor fsg_ext_cap_desc = { + .bLength = USB_DT_USB_EXT_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_CAP_TYPE_EXT, + + .bmAttributes = cpu_to_le32(USB_LPM_SUPPORT), +}; + +static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = { + .bLength = USB_DT_USB_SS_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_SS_CAP_TYPE, + + /* .bmAttributes = LTM is not supported yet */ + + .wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION + | USB_FULL_SPEED_OPERATION + | USB_HIGH_SPEED_OPERATION + | USB_5GBPS_OPERATION), + .bFunctionalitySupport = USB_LOW_SPEED_OPERATION, + .bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT, + .bU2DevExitLat = USB_DEFAULT_U2_DEV_EXIT_LAT, +}; + +static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = { + .bLength = USB_DT_BOS_SIZE, + .bDescriptorType = USB_DT_BOS, + + .wTotalLength = USB_DT_BOS_SIZE + + USB_DT_USB_EXT_CAP_SIZE + + USB_DT_USB_SS_CAP_SIZE, + + .bNumDeviceCaps = 2, +}; + +static struct usb_descriptor_header *fsg_ss_function[] = { +#ifndef FSG_NO_OTG + (struct usb_descriptor_header *) &fsg_otg_desc, +#endif + (struct usb_descriptor_header *) &fsg_intf_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_in_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_out_desc, + (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc, +#ifndef FSG_NO_INTR_EP + (struct usb_descriptor_header *) &fsg_ss_intr_in_desc, + (struct usb_descriptor_header *) &fsg_ss_intr_in_comp_desc, +#endif + NULL, +}; + /* Maxpacket and other transfer characteristics vary by speed. */ static __maybe_unused struct usb_endpoint_descriptor * fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs, - struct usb_endpoint_descriptor *hs) + struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *ss) { - if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) + return ss; + else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) return hs; return fs; } @@ -580,13 +718,24 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) rc = (int) size; goto out; } - num_sectors = size >> 9; /* File size in 512-byte blocks */ + + if (curlun->cdrom) { + curlun->blksize = 2048; + curlun->blkbits = 11; + } else if (inode->i_bdev) { + curlun->blksize = bdev_logical_block_size(inode->i_bdev); + curlun->blkbits = blksize_bits(curlun->blksize); + } else { + curlun->blksize = 512; + curlun->blkbits = 9; + } + + num_sectors = size >> curlun->blkbits; /* File size in logic-block-size blocks */ min_sectors = 1; if (curlun->cdrom) { - num_sectors &= ~3; /* Reduce to a multiple of 2048 */ - min_sectors = 300*4; /* Smallest track is 300 frames */ - if (num_sectors >= 256*60*75*4) { - num_sectors = (256*60*75 - 1) * 4; + min_sectors = 300; /* Smallest track is 300 frames */ + if (num_sectors >= 256*60*75) { + num_sectors = 256*60*75 - 1; LINFO(curlun, "file too big: %s\n", filename); LINFO(curlun, "using only first %d blocks\n", (int) num_sectors); diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index dfed4c1d96c0..29c854bbca44 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* #define VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h index c966440ddd70..8012357e98aa 100644 --- a/drivers/usb/gadget/u_ether.h +++ b/drivers/usb/gadget/u_ether.h @@ -9,15 +9,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __U_ETHER_H diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index a8aa46962d81..3a4a664bab44 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -552,9 +552,8 @@ recycle: /* Push from tty to ldisc; without low_latency set this is handled by * a workqueue, so we won't get callbacks and can hold port_lock */ - if (tty && do_push) { + if (tty && do_push) tty_flip_buffer_push(tty); - } /* We want our data queue to become empty ASAP, keeping data diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 05ba47214361..022baeca7c94 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -356,7 +356,7 @@ static DEVICE_ATTR(srp, S_IWUSR, NULL, usb_udc_srp_store); static ssize_t usb_udc_softconn_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { - struct usb_udc *udc = dev_get_drvdata(dev); + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); if (sysfs_streq(buf, "connect")) { usb_gadget_connect(udc->gadget); @@ -375,23 +375,8 @@ static ssize_t usb_udc_speed_show(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_udc *udc = container_of(dev, struct usb_udc, dev); - struct usb_gadget *gadget = udc->gadget; - - switch (gadget->speed) { - case USB_SPEED_LOW: - return snprintf(buf, PAGE_SIZE, "low-speed\n"); - case USB_SPEED_FULL: - return snprintf(buf, PAGE_SIZE, "full-speed\n"); - case USB_SPEED_HIGH: - return snprintf(buf, PAGE_SIZE, "high-speed\n"); - case USB_SPEED_WIRELESS: - return snprintf(buf, PAGE_SIZE, "wireless\n"); - case USB_SPEED_SUPER: - return snprintf(buf, PAGE_SIZE, "super-speed\n"); - case USB_SPEED_UNKNOWN: /* FALLTHROUGH */ - default: - return snprintf(buf, PAGE_SIZE, "UNKNOWN\n"); - } + return snprintf(buf, PAGE_SIZE, "%s\n", + usb_speed_string(udc->gadget->speed)); } static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL); diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h index 5b7919460fd2..bc78c606c12b 100644 --- a/drivers/usb/gadget/uvc.h +++ b/drivers/usb/gadget/uvc.h @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #ifndef _UVC_GADGET_H_ @@ -56,6 +55,7 @@ struct uvc_event #include <linux/usb.h> /* For usb_endpoint_* */ #include <linux/usb/gadget.h> #include <linux/videodev2.h> +#include <linux/version.h> #include <media/v4l2-fh.h> #include "uvc_queue.h" diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c index aa0ad34e0f1f..d776adb2da67 100644 --- a/drivers/usb/gadget/uvc_queue.c +++ b/drivers/usb/gadget/uvc_queue.c @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c index 52f8f9e513af..f6e083b50191 100644 --- a/drivers/usb/gadget/uvc_v4l2.c +++ b/drivers/usb/gadget/uvc_v4l2.c @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #include <linux/kernel.h> @@ -16,7 +15,6 @@ #include <linux/errno.h> #include <linux/list.h> #include <linux/mutex.h> -#include <linux/version.h> #include <linux/videodev2.h> #include <linux/vmalloc.h> #include <linux/wait.h> diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c index b08f35438d70..b0e53a8ea4f7 100644 --- a/drivers/usb/gadget/uvc_video.c +++ b/drivers/usb/gadget/uvc_video.c @@ -8,7 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ #include <linux/kernel.h> diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c index df6882de50bf..668fe128f2ef 100644 --- a/drivers/usb/gadget/webcam.c +++ b/drivers/usb/gadget/webcam.c @@ -8,8 +8,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * */ + #include <linux/kernel.h> #include <linux/device.h> #include <linux/usb/video.h> diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 00e2fd2d4791..20697cc132d1 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -8,15 +8,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ |