diff options
Diffstat (limited to 'drivers/usb/host/pci-quirks.c')
| -rw-r--r-- | drivers/usb/host/pci-quirks.c | 38 |
1 files changed, 18 insertions, 20 deletions
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index b8961c0381cf..ef08d68b9714 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -16,8 +16,8 @@ #include <linux/export.h> #include <linux/acpi.h> #include <linux/dmi.h> - -#include <soc/bcm2835/raspberrypi-firmware.h> +#include <linux/of.h> +#include <linux/iopoll.h> #include "pci-quirks.h" #include "xhci-ext-caps.h" @@ -957,7 +957,8 @@ static void quirk_usb_disable_ehci(struct pci_dev *pdev) ehci_bios_handoff(pdev, op_reg_base, cap, offset); break; case 0: /* Illegal reserved cap, set cap=0 so we exit */ - cap = 0; /* fall through */ + cap = 0; + fallthrough; default: dev_warn(&pdev->dev, "EHCI: unrecognized capability %02x\n", @@ -1012,15 +1013,9 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, { u32 result; - do { - result = readl(ptr); - result &= mask; - if (result == done) - return 0; - udelay(delay_usec); - wait_usec -= delay_usec; - } while (wait_usec > 0); - return -ETIMEDOUT; + return readl_poll_timeout_atomic(ptr, result, + ((result & mask) == done), + delay_usec, wait_usec); } /* @@ -1246,7 +1241,8 @@ iounmap: static void quirk_usb_early_handoff(struct pci_dev *pdev) { - int ret; + struct device_node *parent; + bool is_rpi; /* Skip Netlogic mips SoC's internal PCI USB controller. * This device does not need/support EHCI/OHCI handoff @@ -1254,14 +1250,16 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev) if (pdev->vendor == 0x184e) /* vendor Netlogic */ return; + /* + * Bypass the Raspberry Pi 4 controller xHCI controller, things are + * taken care of by the board's co-processor. + */ if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { - ret = rpi_firmware_init_vl805(pdev); - if (ret) { - /* Firmware might be outdated, or something failed */ - dev_warn(&pdev->dev, - "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n", - ret); - } + parent = of_get_parent(pdev->bus->dev.of_node); + is_rpi = of_device_is_compatible(parent, "brcm,bcm2711-pcie"); + of_node_put(parent); + if (is_rpi) + return; } if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && |