aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/sl811-hcd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/sl811-hcd.c')
-rw-r--r--drivers/usb/host/sl811-hcd.c146
1 files changed, 81 insertions, 65 deletions
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index a374b7692073..99d43f758ad0 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -2,8 +2,8 @@
* SL811HS HCD (Host Controller Driver) for USB.
*
* Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
- * Copyright (C) 2004 David Brownell
- *
+ * Copyright (C) 2004-2005 David Brownell
+ *
* Periodic scheduling is based on Roman's OHCI code
* Copyright (C) 1999 Roman Weissgaerber
*
@@ -15,7 +15,7 @@
* For documentation, see the SL811HS spec and the "SL811HS Embedded Host"
* document (providing significant pieces missing from that spec); plus
* the SL811S spec if you want peripheral side info.
- */
+ */
/*
* Status: Passed basic stress testing, works with hubs, mice, keyboards,
@@ -67,7 +67,7 @@
MODULE_DESCRIPTION("SL811HS USB Host Controller Driver");
MODULE_LICENSE("GPL");
-#define DRIVER_VERSION "15 Dec 2004"
+#define DRIVER_VERSION "19 May 2005"
#ifndef DEBUG
@@ -121,6 +121,10 @@ static void port_power(struct sl811 *sl811, int is_on)
/* reset as thoroughly as we can */
if (sl811->board && sl811->board->reset)
sl811->board->reset(hcd->self.controller);
+ else {
+ sl811_write(sl811, SL11H_CTLREG1, SL11H_CTL1MASK_SE0);
+ mdelay(20);
+ }
sl811_write(sl811, SL11H_IRQ_ENABLE, 0);
sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
@@ -443,6 +447,7 @@ static void finish_request(
spin_lock(&urb->lock);
if (urb->status == -EINPROGRESS)
urb->status = status;
+ urb->hcpriv = NULL;
spin_unlock(&urb->lock);
spin_unlock(&sl811->lock);
@@ -472,7 +477,7 @@ static void finish_request(
if (*prev)
*prev = ep->next;
sl811->load[i] -= ep->load;
- }
+ }
ep->branch = PERIODIC_SIZE;
sl811->periodic_count--;
sl811_to_hcd(sl811)->self.bandwidth_allocated
@@ -661,9 +666,9 @@ retry:
#ifdef QUIRK2
/* this may no longer be necessary ... */
- if (irqstat == 0 && ret == IRQ_NONE) {
+ if (irqstat == 0) {
irqstat = checkdone(sl811);
- if (irqstat /* && irq != ~0 */ )
+ if (irqstat)
sl811->stat_lost++;
}
#endif
@@ -722,7 +727,8 @@ retry:
if (sl811->active_a) {
sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0);
finish_request(sl811, sl811->active_a,
- container_of(sl811->active_a->hep->urb_list.next,
+ container_of(sl811->active_a
+ ->hep->urb_list.next,
struct urb, urb_list),
NULL, -ESHUTDOWN);
sl811->active_a = NULL;
@@ -731,7 +737,8 @@ retry:
if (sl811->active_b) {
sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0);
finish_request(sl811, sl811->active_b,
- container_of(sl811->active_b->hep->urb_list.next,
+ container_of(sl811->active_b
+ ->hep->urb_list.next,
struct urb, urb_list),
NULL, -ESHUTDOWN);
sl811->active_b = NULL;
@@ -761,7 +768,7 @@ retry:
goto retry;
}
- if (sl811->periodic_count == 0 && list_empty(&sl811->async))
+ if (sl811->periodic_count == 0 && list_empty(&sl811->async))
sofirq_off(sl811);
sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
@@ -796,7 +803,7 @@ static int balance(struct sl811 *sl811, u16 period, u16 load)
}
if (j < PERIODIC_SIZE)
continue;
- branch = i;
+ branch = i;
}
}
return branch;
@@ -890,6 +897,7 @@ static int sl811h_urb_enqueue(
break;
}
+ ep->hep = hep;
hep->hcpriv = ep;
}
@@ -961,15 +969,16 @@ fail:
static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
{
struct sl811 *sl811 = hcd_to_sl811(hcd);
- struct usb_host_endpoint *hep = urb->hcpriv;
+ struct usb_host_endpoint *hep;
unsigned long flags;
struct sl811h_ep *ep;
int retval = 0;
+ spin_lock_irqsave(&sl811->lock, flags);
+ hep = urb->hcpriv;
if (!hep)
- return -EINVAL;
+ goto fail;
- spin_lock_irqsave(&sl811->lock, flags);
ep = hep->hcpriv;
if (ep) {
/* finish right away if this urb can't be active ...
@@ -1017,6 +1026,7 @@ static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
VDBG("dequeue, urb %p active %s; wait4irq\n", urb,
(sl811->active_a == ep) ? "A" : "B");
} else
+fail:
retval = -EINVAL;
spin_unlock_irqrestore(&sl811->lock, flags);
return retval;
@@ -1576,6 +1586,9 @@ sl811h_start(struct usb_hcd *hcd)
if (sl811->board && sl811->board->power)
hub_set_power_budget(udev, sl811->board->power * 2);
+ /* enable power and interupts */
+ port_power(sl811, 1);
+
return 0;
}
@@ -1618,7 +1631,7 @@ static struct hc_driver sl811h_hc_driver = {
/*-------------------------------------------------------------------------*/
-static int __init_or_module
+static int __devexit
sl811h_remove(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
@@ -1631,21 +1644,20 @@ sl811h_remove(struct device *dev)
remove_debug_file(sl811);
usb_remove_hcd(hcd);
- iounmap(sl811->data_reg);
+ /* some platforms may use IORESOURCE_IO */
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- release_mem_region(res->start, 1);
+ if (res)
+ iounmap(sl811->data_reg);
- iounmap(sl811->addr_reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, 1);
+ if (res)
+ iounmap(sl811->addr_reg);
usb_put_hcd(hcd);
return 0;
}
-#define resource_len(r) (((r)->end - (r)->start) + 1)
-
-static int __init
+static int __devinit
sl811h_probe(struct device *dev)
{
struct usb_hcd *hcd;
@@ -1656,7 +1668,7 @@ sl811h_probe(struct device *dev)
void __iomem *addr_reg;
void __iomem *data_reg;
int retval;
- u8 tmp;
+ u8 tmp, ioaddr = 0;
/* basic sanity checks first. board-specific init logic should
* have initialized these three resources and probably board
@@ -1664,13 +1676,8 @@ sl811h_probe(struct device *dev)
* minimal sanity checking.
*/
pdev = container_of(dev, struct platform_device, dev);
- if (pdev->num_resources < 3)
- return -ENODEV;
-
- addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
irq = platform_get_irq(pdev, 0);
- if (!addr || !data || irq < 0)
+ if (pdev->num_resources < 3 || irq < 0)
return -ENODEV;
/* refuse to confuse usbcore */
@@ -1679,24 +1686,31 @@ sl811h_probe(struct device *dev)
return -EINVAL;
}
- if (!request_mem_region(addr->start, 1, hcd_name)) {
- retval = -EBUSY;
- goto err1;
- }
- addr_reg = ioremap(addr->start, resource_len(addr));
- if (addr_reg == NULL) {
- retval = -ENOMEM;
- goto err2;
- }
+ /* the chip may be wired for either kind of addressing */
+ addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ retval = -EBUSY;
+ if (!addr || !data) {
+ addr = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ data = platform_get_resource(pdev, IORESOURCE_IO, 1);
+ if (!addr || !data)
+ return -ENODEV;
+ ioaddr = 1;
+
+ addr_reg = (void __iomem *) addr->start;
+ data_reg = (void __iomem *) data->start;
+ } else {
+ addr_reg = ioremap(addr->start, 1);
+ if (addr_reg == NULL) {
+ retval = -ENOMEM;
+ goto err2;
+ }
- if (!request_mem_region(data->start, 1, hcd_name)) {
- retval = -EBUSY;
- goto err3;
- }
- data_reg = ioremap(data->start, resource_len(addr));
- if (data_reg == NULL) {
- retval = -ENOMEM;
- goto err4;
+ data_reg = ioremap(data->start, 1);
+ if (data_reg == NULL) {
+ retval = -ENOMEM;
+ goto err4;
+ }
}
/* allocate and initialize hcd */
@@ -1737,12 +1751,14 @@ sl811h_probe(struct device *dev)
goto err6;
}
- /* sl811s would need a different handler for this irq */
-#ifdef CONFIG_ARM
- /* Cypress docs say the IRQ is IRQT_HIGH ... */
- set_irq_type(irq, IRQT_RISING);
-#endif
- retval = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+ /* The chip's IRQ is level triggered, active high. A requirement
+ * for platform device setup is to cope with things like signal
+ * inverters (e.g. CF is active low) or working only with edge
+ * triggers (e.g. most ARM CPUs). Initial driver stress testing
+ * was on a system with single edge triggering, so most sorts of
+ * triggering arrangement should work.
+ */
+ retval = usb_add_hcd(hcd, irq, SA_INTERRUPT | SA_SHIRQ);
if (retval != 0)
goto err6;
@@ -1752,14 +1768,12 @@ sl811h_probe(struct device *dev)
err6:
usb_put_hcd(hcd);
err5:
- iounmap(data_reg);
+ if (!ioaddr)
+ iounmap(data_reg);
err4:
- release_mem_region(data->start, 1);
- err3:
- iounmap(addr_reg);
+ if (!ioaddr)
+ iounmap(addr_reg);
err2:
- release_mem_region(addr->start, 1);
- err1:
DBG("init error, %d\n", retval);
return retval;
}
@@ -1767,7 +1781,7 @@ sl811h_probe(struct device *dev)
#ifdef CONFIG_PM
/* for this device there's no useful distinction between the controller
- * and its root hub, except that the root hub only gets direct PM calls
+ * and its root hub, except that the root hub only gets direct PM calls
* when CONFIG_USB_SUSPEND is enabled.
*/
@@ -1821,20 +1835,22 @@ sl811h_resume(struct device *dev, u32 phase)
#endif
-static struct device_driver sl811h_driver = {
+/* this driver is exported so sl811_cs can depend on it */
+struct device_driver sl811h_driver = {
.name = (char *) hcd_name,
.bus = &platform_bus_type,
.probe = sl811h_probe,
- .remove = sl811h_remove,
+ .remove = __devexit_p(sl811h_remove),
.suspend = sl811h_suspend,
.resume = sl811h_resume,
};
+EXPORT_SYMBOL(sl811h_driver);
/*-------------------------------------------------------------------------*/
-
-static int __init sl811h_init(void)
+
+static int __init sl811h_init(void)
{
if (usb_disabled())
return -ENODEV;
@@ -1844,8 +1860,8 @@ static int __init sl811h_init(void)
}
module_init(sl811h_init);
-static void __exit sl811h_cleanup(void)
-{
+static void __exit sl811h_cleanup(void)
+{
driver_unregister(&sl811h_driver);
}
module_exit(sl811h_cleanup);