diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 5 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-plat.c | 10 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 43 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 107 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 2 |
6 files changed, 79 insertions, 90 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 696160d48ae8..388cfd83b6b6 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -22,7 +22,6 @@ #include <linux/slab.h> -#include <linux/device.h> #include <asm/unaligned.h> #include "xhci.h" @@ -1149,9 +1148,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME * is enabled, so also enable remote wake here. */ - if (hcd->self.root_hub->do_remote_wakeup - && device_may_wakeup(hcd->self.controller)) { - + if (hcd->self.root_hub->do_remote_wakeup) { if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; t2 &= ~PORT_WKCONN_E; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 9a69b1f1b300..142b601f9563 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -281,7 +281,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) if (xhci->quirks & XHCI_COMP_MODE_QUIRK) pdev->no_d3cold = true; - return xhci_suspend(xhci); + return xhci_suspend(xhci, do_wakeup); } static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 3d78b0cd674b..646300cbe5f7 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -204,7 +204,15 @@ static int xhci_plat_suspend(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); - return xhci_suspend(xhci); + /* + * xhci_suspend() needs `do_wakeup` to know whether host is allowed + * to do wakeup during suspend. Since xhci_plat_suspend is currently + * only designed for system suspend, device_may_wakeup() is enough + * to dertermine whether host is allowed to do wakeup. Need to + * reconsider this when xhci_plat_suspend enlarges its scope, e.g., + * also applies to runtime suspend. + */ + return xhci_suspend(xhci, device_may_wakeup(dev)); } static int xhci_plat_resume(struct device *dev) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index bc6fcbc16f61..06433aec81d7 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1067,9 +1067,8 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, false); xhci_ring_cmd_db(xhci); } else { - /* Clear our internal halted state and restart the ring(s) */ + /* Clear our internal halted state */ xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED; - ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } } @@ -1823,22 +1822,13 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, ep->stopped_td = td; return 0; } else { - if (trb_comp_code == COMP_STALL) { - /* The transfer is completed from the driver's - * perspective, but we need to issue a set dequeue - * command for this stalled endpoint to move the dequeue - * pointer past the TD. We can't do that here because - * the halt condition must be cleared first. Let the - * USB class driver clear the stall later. - */ - ep->stopped_td = td; - ep->stopped_stream = ep_ring->stream_id; - } else if (xhci_requires_manual_halt_cleanup(xhci, - ep_ctx, trb_comp_code)) { - /* Other types of errors halt the endpoint, but the - * class driver doesn't call usb_reset_endpoint() unless - * the error is -EPIPE. Clear the halted status in the - * xHCI hardware manually. + if (trb_comp_code == COMP_STALL || + xhci_requires_manual_halt_cleanup(xhci, ep_ctx, + trb_comp_code)) { + /* Issue a reset endpoint command to clear the host side + * halt, followed by a set dequeue command to move the + * dequeue pointer past the TD. + * The class driver clears the device side halt later. */ xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index, ep_ring->stream_id, @@ -1958,9 +1948,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, else td->urb->actual_length = 0; - xhci_cleanup_halted_endpoint(xhci, - slot_id, ep_index, 0, td, event_trb); - return finish_td(xhci, td, event_trb, event, ep, status, true); + return finish_td(xhci, td, event_trb, event, ep, status, false); } /* * Did we transfer any data, despite the errors that might have @@ -2519,17 +2507,8 @@ cleanup: if (ret) { urb = td->urb; urb_priv = urb->hcpriv; - /* Leave the TD around for the reset endpoint function - * to use(but only if it's not a control endpoint, - * since we already queued the Set TR dequeue pointer - * command for stalled control endpoints). - */ - if (usb_endpoint_xfer_control(&urb->ep->desc) || - (trb_comp_code != COMP_STALL && - trb_comp_code != COMP_BABBLE)) - xhci_urb_free_priv(xhci, urb_priv); - else - kfree(urb_priv); + + xhci_urb_free_priv(xhci, urb_priv); usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); if ((urb->actual_length != urb->transfer_buffer_length && diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2a5d45b4cb15..033b46c470bd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -35,6 +35,8 @@ #define DRIVER_AUTHOR "Sarah Sharp" #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" +#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E) + /* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */ static int link_quirk; module_param(link_quirk, int, S_IRUGO | S_IWUSR); @@ -851,13 +853,47 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) xhci_set_cmd_ring_deq(xhci); } +static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci) +{ + int port_index; + __le32 __iomem **port_array; + unsigned long flags; + u32 t1, t2; + + spin_lock_irqsave(&xhci->lock, flags); + + /* disble usb3 ports Wake bits*/ + port_index = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + while (port_index--) { + t1 = readl(port_array[port_index]); + t1 = xhci_port_state_to_neutral(t1); + t2 = t1 & ~PORT_WAKE_BITS; + if (t1 != t2) + writel(t2, port_array[port_index]); + } + + /* disble usb2 ports Wake bits*/ + port_index = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + while (port_index--) { + t1 = readl(port_array[port_index]); + t1 = xhci_port_state_to_neutral(t1); + t2 = t1 & ~PORT_WAKE_BITS; + if (t1 != t2) + writel(t2, port_array[port_index]); + } + + spin_unlock_irqrestore(&xhci->lock, flags); +} + /* * Stop HC (not bus-specific) * * This is called when the machine transition into S3/S4 mode. * */ -int xhci_suspend(struct xhci_hcd *xhci) +int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup) { int rc = 0; unsigned int delay = XHCI_MAX_HALT_USEC; @@ -868,6 +904,10 @@ int xhci_suspend(struct xhci_hcd *xhci) xhci->shared_hcd->state != HC_STATE_SUSPENDED) return -EINVAL; + /* Clear root port wake on bits if wakeup not allowed. */ + if (!do_wakeup) + xhci_disable_port_wake_on_bits(xhci); + /* Don't poll the roothubs on bus suspend. */ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__); clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); @@ -2912,68 +2952,33 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, } } -/* Deal with stalled endpoints. The core should have sent the control message - * to clear the halt condition. However, we need to make the xHCI hardware - * reset its sequence number, since a device will expect a sequence number of - * zero after the halt condition is cleared. +/* Called when clearing halted device. The core should have sent the control + * message to clear the device halt condition. The host side of the halt should + * already be cleared with a reset endpoint command issued when the STALL tx + * event was received. + * * Context: in_interrupt */ + void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { struct xhci_hcd *xhci; - struct usb_device *udev; - unsigned int ep_index; - unsigned long flags; - int ret; - struct xhci_virt_ep *virt_ep; - struct xhci_command *command; xhci = hcd_to_xhci(hcd); - udev = (struct usb_device *) ep->hcpriv; - /* Called with a root hub endpoint (or an endpoint that wasn't added - * with xhci_add_endpoint() - */ - if (!ep->hcpriv) - return; - ep_index = xhci_get_endpoint_index(&ep->desc); - virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index]; - if (!virt_ep->stopped_td) { - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Endpoint 0x%x not halted, refusing to reset.", - ep->desc.bEndpointAddress); - return; - } - if (usb_endpoint_xfer_control(&ep->desc)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Control endpoint stall already handled."); - return; - } - command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC); - if (!command) - return; - - xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep, - "Queueing reset endpoint command"); - spin_lock_irqsave(&xhci->lock, flags); - ret = xhci_queue_reset_ep(xhci, command, udev->slot_id, ep_index); /* - * Can't change the ring dequeue pointer until it's transitioned to the - * stopped state, which is only upon a successful reset endpoint - * command. Better hope that last command worked! + * We might need to implement the config ep cmd in xhci 4.8.1 note: + * The Reset Endpoint Command may only be issued to endpoints in the + * Halted state. If software wishes reset the Data Toggle or Sequence + * Number of an endpoint that isn't in the Halted state, then software + * may issue a Configure Endpoint Command with the Drop and Add bits set + * for the target endpoint. that is in the Stopped state. */ - if (!ret) { - xhci_cleanup_stalled_ring(xhci, udev, ep_index); - kfree(virt_ep->stopped_td); - xhci_ring_cmd_db(xhci); - } - virt_ep->stopped_td = NULL; - virt_ep->stopped_stream = 0; - spin_unlock_irqrestore(&xhci->lock, flags); - if (ret) - xhci_warn(xhci, "FIXME allocate a new ring segment\n"); + /* For now just print debug to follow the situation */ + xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n", + ep->desc.bEndpointAddress); } static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index df76d642e719..d745715a1e2f 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1746,7 +1746,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *)); #ifdef CONFIG_PM -int xhci_suspend(struct xhci_hcd *xhci); +int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup); int xhci_resume(struct xhci_hcd *xhci, bool hibernated); #else #define xhci_suspend NULL |