aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r--drivers/usb/phy/phy-fsl-usb.c35
-rw-r--r--drivers/usb/phy/phy-generic.c150
-rw-r--r--drivers/usb/phy/phy-generic.h10
-rw-r--r--drivers/usb/phy/phy-mxs-usb.c86
4 files changed, 199 insertions, 82 deletions
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index ab38aa32a6c1..94eb2923afed 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -107,19 +107,6 @@ static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
#define fsl_writel(val, addr) writel(val, addr)
#endif /* CONFIG_PPC32 */
-/* Routines to access transceiver ULPI registers */
-u8 view_ulpi(u8 addr)
-{
- u32 temp;
-
- temp = 0x40000000 | (addr << 16);
- fsl_writel(temp, &usb_dr_regs->ulpiview);
- udelay(1000);
- while (temp & 0x40)
- temp = fsl_readl(&usb_dr_regs->ulpiview);
- return (le32_to_cpu(temp) & 0x0000ff00) >> 8;
-}
-
int write_ulpi(u8 addr, u8 data)
{
u32 temp;
@@ -460,28 +447,6 @@ static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
fsl_otg_del_timer(fsm, timer);
}
-/*
- * Reduce timer count by 1, and find timeout conditions.
- * Called by fsl_otg 1ms timer interrupt
- */
-int fsl_otg_tick_timer(void)
-{
- struct fsl_otg_timer *tmp_timer, *del_tmp;
- int expired = 0;
-
- list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
- tmp_timer->count--;
- /* check if timer expires */
- if (!tmp_timer->count) {
- list_del(&tmp_timer->list);
- tmp_timer->function(tmp_timer->data);
- expired = 1;
- }
- }
-
- return expired;
-}
-
/* Reset controller, not reset the bus */
void otg_reset_controller(void)
{
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index f1b719b45a53..70be50b734b2 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -27,6 +27,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/usb/usb_phy_generic.h>
#include <linux/slab.h>
@@ -39,6 +40,10 @@
#include "phy-generic.h"
+#define VBUS_IRQ_FLAGS \
+ (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \
+ IRQF_ONESHOT)
+
struct platform_device *usb_phy_generic_register(void)
{
return platform_device_register_simple("usb_phy_generic",
@@ -59,19 +64,79 @@ static int nop_set_suspend(struct usb_phy *x, int suspend)
static void nop_reset_set(struct usb_phy_generic *nop, int asserted)
{
- int value;
+ if (!nop->gpiod_reset)
+ return;
+
+ gpiod_direction_output(nop->gpiod_reset, !asserted);
+ usleep_range(10000, 20000);
+ gpiod_set_value(nop->gpiod_reset, asserted);
+}
+
+/* interface to regulator framework */
+static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
+{
+ struct regulator *vbus_draw = nop->vbus_draw;
+ int enabled;
+ int ret;
- if (!gpio_is_valid(nop->gpio_reset))
+ if (!vbus_draw)
return;
- value = asserted;
- if (nop->reset_active_low)
- value = !value;
+ enabled = nop->vbus_draw_enabled;
+ if (mA) {
+ regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
+ if (!enabled) {
+ ret = regulator_enable(vbus_draw);
+ if (ret < 0)
+ return;
+ nop->vbus_draw_enabled = 1;
+ }
+ } else {
+ if (enabled) {
+ ret = regulator_disable(vbus_draw);
+ if (ret < 0)
+ return;
+ nop->vbus_draw_enabled = 0;
+ }
+ }
+ nop->mA = mA;
+}
+
+
+static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
+{
+ struct usb_phy_generic *nop = data;
+ struct usb_otg *otg = nop->phy.otg;
+ int vbus, status;
+
+ vbus = gpiod_get_value(nop->gpiod_vbus);
+ if ((vbus ^ nop->vbus) == 0)
+ return IRQ_HANDLED;
+ nop->vbus = vbus;
+
+ if (vbus) {
+ status = USB_EVENT_VBUS;
+ otg->state = OTG_STATE_B_PERIPHERAL;
+ nop->phy.last_event = status;
+ usb_gadget_vbus_connect(otg->gadget);
+
+ /* drawing a "unit load" is *always* OK, except for OTG */
+ nop_set_vbus_draw(nop, 100);
+
+ atomic_notifier_call_chain(&nop->phy.notifier, status,
+ otg->gadget);
+ } else {
+ nop_set_vbus_draw(nop, 0);
- gpio_set_value_cansleep(nop->gpio_reset, value);
+ usb_gadget_vbus_disconnect(otg->gadget);
+ status = USB_EVENT_NONE;
+ otg->state = OTG_STATE_B_IDLE;
+ nop->phy.last_event = status;
- if (!asserted)
- usleep_range(10000, 20000);
+ atomic_notifier_call_chain(&nop->phy.notifier, status,
+ otg->gadget);
+ }
+ return IRQ_HANDLED;
}
int usb_gen_phy_init(struct usb_phy *phy)
@@ -143,36 +208,47 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
struct usb_phy_generic_platform_data *pdata)
{
enum usb_phy_type type = USB_PHY_TYPE_USB2;
- int err;
+ int err = 0;
u32 clk_rate = 0;
bool needs_vcc = false;
- nop->reset_active_low = true; /* default behaviour */
-
if (dev->of_node) {
struct device_node *node = dev->of_node;
- enum of_gpio_flags flags = 0;
if (of_property_read_u32(node, "clock-frequency", &clk_rate))
clk_rate = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
- nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
- 0, &flags);
- if (nop->gpio_reset == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
- nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
-
+ nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset");
+ err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
+ if (!err) {
+ nop->gpiod_vbus = devm_gpiod_get_optional(dev,
+ "vbus-detect");
+ err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
+ }
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
- nop->gpio_reset = pdata->gpio_reset;
- } else {
- nop->gpio_reset = -1;
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+ dev_name(dev));
+ if (!err)
+ nop->gpiod_reset =
+ gpio_to_desc(pdata->gpio_reset);
+ }
+ nop->gpiod_vbus = pdata->gpiod_vbus;
+ }
+
+ if (err == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (err) {
+ dev_err(dev, "Error requesting RESET or VBUS GPIO\n");
+ return err;
}
+ if (nop->gpiod_reset)
+ gpiod_direction_output(nop->gpiod_reset, 1);
nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
GFP_KERNEL);
@@ -201,24 +277,6 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
return -EPROBE_DEFER;
}
- if (gpio_is_valid(nop->gpio_reset)) {
- unsigned long gpio_flags;
-
- /* Assert RESET */
- if (nop->reset_active_low)
- gpio_flags = GPIOF_OUT_INIT_LOW;
- else
- gpio_flags = GPIOF_OUT_INIT_HIGH;
-
- err = devm_gpio_request_one(dev, nop->gpio_reset,
- gpio_flags, dev_name(dev));
- if (err) {
- dev_err(dev, "Error requesting RESET GPIO %d\n",
- nop->gpio_reset);
- return err;
- }
- }
-
nop->dev = dev;
nop->phy.dev = nop->dev;
nop->phy.label = "nop-xceiv";
@@ -247,6 +305,18 @@ static int usb_phy_generic_probe(struct platform_device *pdev)
err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
if (err)
return err;
+ if (nop->gpiod_vbus) {
+ err = devm_request_threaded_irq(&pdev->dev,
+ gpiod_to_irq(nop->gpiod_vbus),
+ NULL, nop_gpio_vbus_thread,
+ VBUS_IRQ_FLAGS, "vbus_detect",
+ nop);
+ if (err) {
+ dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
+ gpiod_to_irq(nop->gpiod_vbus), err);
+ return err;
+ }
+ }
nop->phy.init = usb_gen_phy_init;
nop->phy.shutdown = usb_gen_phy_shutdown;
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
index d8feacc0b7fb..0d0eadd54ed9 100644
--- a/drivers/usb/phy/phy-generic.h
+++ b/drivers/usb/phy/phy-generic.h
@@ -2,14 +2,20 @@
#define _PHY_GENERIC_H_
#include <linux/usb/usb_phy_generic.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
struct usb_phy_generic {
struct usb_phy phy;
struct device *dev;
struct clk *clk;
struct regulator *vcc;
- int gpio_reset;
- bool reset_active_low;
+ struct gpio_desc *gpiod_reset;
+ struct gpio_desc *gpiod_vbus;
+ struct regulator *vbus_draw;
+ bool vbus_draw_enabled;
+ unsigned long mA;
+ unsigned int vbus;
};
int usb_gen_phy_init(struct usb_phy *phy);
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index b9589f663683..8f7cb068d29b 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -40,6 +40,7 @@
#define BM_USBPHY_CTRL_SFTRST BIT(31)
#define BM_USBPHY_CTRL_CLKGATE BIT(30)
+#define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27)
#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26)
#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25)
#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23)
@@ -69,6 +70,9 @@
#define ANADIG_USB2_LOOPBACK_SET 0x244
#define ANADIG_USB2_LOOPBACK_CLR 0x248
+#define ANADIG_USB1_MISC 0x1f0
+#define ANADIG_USB2_MISC 0x250
+
#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12)
#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
@@ -80,6 +84,11 @@
#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 BIT(2)
#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN BIT(5)
+#define BM_ANADIG_USB1_MISC_RX_VPIN_FS BIT(29)
+#define BM_ANADIG_USB1_MISC_RX_VMIN_FS BIT(28)
+#define BM_ANADIG_USB2_MISC_RX_VPIN_FS BIT(29)
+#define BM_ANADIG_USB2_MISC_RX_VMIN_FS BIT(28)
+
#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
/* Do disconnection between PHY and controller without vbus */
@@ -131,8 +140,7 @@ static const struct mxs_phy_data vf610_phy_data = {
};
static const struct mxs_phy_data imx6sx_phy_data = {
- .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
- MXS_PHY_NEED_IP_FIX,
+ .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
};
static const struct of_device_id mxs_phy_dt_ids[] = {
@@ -256,6 +264,18 @@ static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
usleep_range(500, 1000);
}
+static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
+{
+ void __iomem *base = mxs_phy->phy.io_priv;
+ u32 phyctrl = readl(base + HW_USBPHY_CTRL);
+
+ if (IS_ENABLED(CONFIG_USB_OTG) &&
+ !(phyctrl & BM_USBPHY_CTRL_OTG_ID_VALUE))
+ return true;
+
+ return false;
+}
+
static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
{
bool vbus_is_on = false;
@@ -270,7 +290,7 @@ static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
- if (on && !vbus_is_on)
+ if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
__mxs_phy_disconnect_line(mxs_phy, true);
else
__mxs_phy_disconnect_line(mxs_phy, false);
@@ -293,6 +313,17 @@ static int mxs_phy_init(struct usb_phy *phy)
static void mxs_phy_shutdown(struct usb_phy *phy)
{
struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+ u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
+ BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
+ BM_USBPHY_CTRL_ENIDCHG_WKUP |
+ BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
+ BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
+ BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
+ BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
+ BM_USBPHY_CTRL_ENAUTO_PWRON_PLL;
+
+ writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR);
+ writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
writel(BM_USBPHY_CTRL_CLKGATE,
phy->io_priv + HW_USBPHY_CTRL_SET);
@@ -300,13 +331,56 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
clk_disable_unprepare(mxs_phy->clk);
}
+static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
+{
+ unsigned int line_state;
+ /* bit definition is the same for all controllers */
+ unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
+ dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
+ unsigned int reg = ANADIG_USB1_MISC;
+
+ /* If the SoCs don't have anatop, quit */
+ if (!mxs_phy->regmap_anatop)
+ return false;
+
+ if (mxs_phy->port_id == 0)
+ reg = ANADIG_USB1_MISC;
+ else if (mxs_phy->port_id == 1)
+ reg = ANADIG_USB2_MISC;
+
+ regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
+
+ if ((line_state & (dp_bit | dm_bit)) == dm_bit)
+ return true;
+ else
+ return false;
+}
+
static int mxs_phy_suspend(struct usb_phy *x, int suspend)
{
int ret;
struct mxs_phy *mxs_phy = to_mxs_phy(x);
+ bool low_speed_connection, vbus_is_on;
+
+ low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
+ vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
if (suspend) {
- writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
+ /*
+ * FIXME: Do not power down RXPWD1PT1 bit for low speed
+ * connect. The low speed connection will have problem at
+ * very rare cases during usb suspend and resume process.
+ */
+ if (low_speed_connection & vbus_is_on) {
+ /*
+ * If value to be set as pwd value is not 0xffffffff,
+ * several 32Khz cycles are needed.
+ */
+ mxs_phy_clock_switch_delay();
+ writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD);
+ } else {
+ writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
+ }
writel(BM_USBPHY_CTRL_CLKGATE,
x->io_priv + HW_USBPHY_CTRL_SET);
clk_disable_unprepare(mxs_phy->clk);
@@ -359,7 +433,9 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy,
dev_dbg(phy->dev, "%s device has disconnected\n",
(speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
- if (speed == USB_SPEED_HIGH)
+ /* Sometimes, the speed is not high speed when the error occurs */
+ if (readl(phy->io_priv + HW_USBPHY_CTRL) &
+ BM_USBPHY_CTRL_ENHOSTDISCONDETECT)
writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
phy->io_priv + HW_USBPHY_CTRL_CLR);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.