aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r--drivers/usb/phy/Kconfig4
-rw-r--r--drivers/usb/phy/of.c2
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c6
-rw-r--r--drivers/usb/phy/phy-generic.c12
-rw-r--r--drivers/usb/phy/phy-msm-usb.c33
-rw-r--r--drivers/usb/phy/phy-rcar-gen2-usb.c2
-rw-r--r--drivers/usb/phy/phy.c4
7 files changed, 22 insertions, 41 deletions
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 52d3d58252e1..2175678e674e 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -139,7 +139,7 @@ config USB_ISP1301
config USB_MSM_OTG
tristate "Qualcomm on-chip USB OTG controller support"
- depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM || COMPILE_TEST)
+ depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)
depends on RESET_CONTROLLER
select USB_PHY
help
@@ -202,13 +202,13 @@ config USB_RCAR_GEN2_PHY
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
depends on ARM || ARM64
+ select USB_ULPI_VIEWPORT
help
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.
config USB_ULPI_VIEWPORT
bool
- depends on USB_ULPI
help
Provides read/write operations to the ULPI phy register set for
controllers with a viewport register (e.g. Chipidea/ARC controllers).
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
index 7ea0154da9d5..66ffa82457a8 100644
--- a/drivers/usb/phy/of.c
+++ b/drivers/usb/phy/of.c
@@ -27,7 +27,7 @@ static const char *const usbphy_modes[] = {
* @np: Pointer to the given device_node
*
* The function gets phy interface string from property 'phy_type',
- * and returns the correspondig enum usb_phy_interface
+ * and returns the corresponding enum usb_phy_interface
*/
enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
{
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 0b1bd2369293..7225d526df04 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -277,7 +277,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n",
ret);
- ret = regulator_set_optimum_mode(ab->v_ulpi, 28000);
+ ret = regulator_set_load(ab->v_ulpi, 28000);
if (ret < 0)
dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
ret);
@@ -317,7 +317,7 @@ static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
ab->saved_v_ulpi, ret);
}
- ret = regulator_set_optimum_mode(ab->v_ulpi, 0);
+ ret = regulator_set_load(ab->v_ulpi, 0);
if (ret < 0)
dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
ret);
@@ -893,7 +893,7 @@ static int abx500_usb_link_status_update(struct ab8500_usb *ab)
/*
* Disconnection Sequence:
- * 1. Disconect Interrupt
+ * 1. Disconnect Interrupt
* 2. Disable regulators
* 3. Disable AB clock
* 4. Disable the Phy
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 70be50b734b2..deee68eafb72 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -62,14 +62,14 @@ static int nop_set_suspend(struct usb_phy *x, int suspend)
return 0;
}
-static void nop_reset_set(struct usb_phy_generic *nop, int asserted)
+static void nop_reset(struct usb_phy_generic *nop)
{
if (!nop->gpiod_reset)
return;
- gpiod_direction_output(nop->gpiod_reset, !asserted);
+ gpiod_set_value(nop->gpiod_reset, 1);
usleep_range(10000, 20000);
- gpiod_set_value(nop->gpiod_reset, asserted);
+ gpiod_set_value(nop->gpiod_reset, 0);
}
/* interface to regulator framework */
@@ -151,8 +151,7 @@ int usb_gen_phy_init(struct usb_phy *phy)
if (!IS_ERR(nop->clk))
clk_prepare_enable(nop->clk);
- /* De-assert RESET */
- nop_reset_set(nop, 0);
+ nop_reset(nop);
return 0;
}
@@ -162,8 +161,7 @@ void usb_gen_phy_shutdown(struct usb_phy *phy)
{
struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
- /* Assert RESET */
- nop_reset_set(nop, 1);
+ gpiod_set_value(nop->gpiod_reset, 1);
if (!IS_ERR(nop->clk))
clk_disable_unprepare(nop->clk);
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 000fd892455f..c9156beeadef 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -142,27 +142,22 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
int ret = 0;
if (on) {
- ret = regulator_set_optimum_mode(motg->v1p8,
- USB_PHY_1P8_HPM_LOAD);
+ ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_HPM_LOAD);
if (ret < 0) {
pr_err("Could not set HPM for v1p8\n");
return ret;
}
- ret = regulator_set_optimum_mode(motg->v3p3,
- USB_PHY_3P3_HPM_LOAD);
+ ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_HPM_LOAD);
if (ret < 0) {
pr_err("Could not set HPM for v3p3\n");
- regulator_set_optimum_mode(motg->v1p8,
- USB_PHY_1P8_LPM_LOAD);
+ regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
return ret;
}
} else {
- ret = regulator_set_optimum_mode(motg->v1p8,
- USB_PHY_1P8_LPM_LOAD);
+ ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
if (ret < 0)
pr_err("Could not set LPM for v1p8\n");
- ret = regulator_set_optimum_mode(motg->v3p3,
- USB_PHY_3P3_LPM_LOAD);
+ ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_LPM_LOAD);
if (ret < 0)
pr_err("Could not set LPM for v3p3\n");
}
@@ -263,9 +258,7 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
{
int ret;
- if (motg->pdata->link_clk_reset)
- ret = motg->pdata->link_clk_reset(motg->clk, assert);
- else if (assert)
+ if (assert)
ret = reset_control_assert(motg->link_rst);
else
ret = reset_control_deassert(motg->link_rst);
@@ -281,9 +274,7 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg)
{
int ret = 0;
- if (motg->pdata->phy_clk_reset)
- ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
- else if (motg->phy_rst)
+ if (motg->phy_rst)
ret = reset_control_reset(motg->phy_rst);
if (ret)
@@ -1551,16 +1542,6 @@ static int msm_otg_probe(struct platform_device *pdev)
phy = &motg->phy;
phy->dev = &pdev->dev;
- if (motg->pdata->phy_clk_reset) {
- motg->phy_reset_clk = devm_clk_get(&pdev->dev,
- np ? "phy" : "usb_phy_clk");
-
- if (IS_ERR(motg->phy_reset_clk)) {
- dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
- return PTR_ERR(motg->phy_reset_clk);
- }
- }
-
motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
if (IS_ERR(motg->clk)) {
dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c
index f83808413ba2..f81800b6562a 100644
--- a/drivers/usb/phy/phy-rcar-gen2-usb.c
+++ b/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -47,7 +47,7 @@ struct rcar_gen2_usb_phy_priv {
/* USB General status register */
#define USBHS_UGSTS_REG 0x88
-#define USBHS_UGSTS_LOCK (3 << 8)
+#define USBHS_UGSTS_LOCK (1 << 8)
/* Enable USBHS internal phy */
static int __rcar_gen2_usbhs_phy_enable(void __iomem *base)
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index 2f9735b35338..d1cd6b50f520 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -81,7 +81,9 @@ static void devm_usb_phy_release(struct device *dev, void *res)
static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
{
- return res == match_data;
+ struct usb_phy **phy = res;
+
+ return *phy == match_data;
}
/**
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.