aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/f81232.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/f81232.c')
-rw-r--r--drivers/usb/serial/f81232.c558
1 files changed, 459 insertions, 99 deletions
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index c5dc233db2d9..972f5a5fe577 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -19,10 +19,11 @@
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1934, 0x0706) },
@@ -30,37 +31,218 @@ static const struct usb_device_id id_table[] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
-#define CONTROL_DTR 0x01
-#define CONTROL_RTS 0x02
+/* Maximum baudrate for F81232 */
+#define F81232_MAX_BAUDRATE 115200
-#define UART_STATE 0x08
-#define UART_STATE_TRANSIENT_MASK 0x74
-#define UART_DCD 0x01
-#define UART_DSR 0x02
-#define UART_BREAK_ERROR 0x04
-#define UART_RING 0x08
-#define UART_FRAME_ERROR 0x10
-#define UART_PARITY_ERROR 0x20
-#define UART_OVERRUN_ERROR 0x40
-#define UART_CTS 0x80
+/* USB Control EP parameter */
+#define F81232_REGISTER_REQUEST 0xa0
+#define F81232_GET_REGISTER 0xc0
+#define F81232_SET_REGISTER 0x40
+
+#define SERIAL_BASE_ADDRESS 0x0120
+#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS)
+#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
+#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
+#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS)
+#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
+#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
struct f81232_private {
- spinlock_t lock;
- u8 line_control;
- u8 line_status;
+ struct mutex lock;
+ u8 modem_control;
+ u8 modem_status;
+ struct work_struct interrupt_work;
+ struct usb_serial_port *port;
};
+static int calc_baud_divisor(speed_t baudrate)
+{
+ return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate);
+}
+
+static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
+{
+ int status;
+ u8 *tmp;
+ struct usb_device *dev = port->serial->dev;
+
+ tmp = kmalloc(sizeof(*val), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ status = usb_control_msg(dev,
+ usb_rcvctrlpipe(dev, 0),
+ F81232_REGISTER_REQUEST,
+ F81232_GET_REGISTER,
+ reg,
+ 0,
+ tmp,
+ sizeof(*val),
+ USB_CTRL_GET_TIMEOUT);
+ if (status != sizeof(*val)) {
+ dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+ if (status < 0)
+ status = usb_translate_errors(status);
+ else
+ status = -EIO;
+ } else {
+ status = 0;
+ *val = *tmp;
+ }
+
+ kfree(tmp);
+ return status;
+}
+
+static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
+{
+ int status;
+ u8 *tmp;
+ struct usb_device *dev = port->serial->dev;
+
+ tmp = kmalloc(sizeof(val), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ *tmp = val;
+
+ status = usb_control_msg(dev,
+ usb_sndctrlpipe(dev, 0),
+ F81232_REGISTER_REQUEST,
+ F81232_SET_REGISTER,
+ reg,
+ 0,
+ tmp,
+ sizeof(val),
+ USB_CTRL_SET_TIMEOUT);
+ if (status != sizeof(val)) {
+ dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+ if (status < 0)
+ status = usb_translate_errors(status);
+ else
+ status = -EIO;
+ } else {
+ status = 0;
+ }
+
+ kfree(tmp);
+ return status;
+}
+
+static void f81232_read_msr(struct usb_serial_port *port)
+{
+ int status;
+ u8 current_msr;
+ struct tty_struct *tty;
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ mutex_lock(&priv->lock);
+ status = f81232_get_register(port, MODEM_STATUS_REGISTER,
+ &current_msr);
+ if (status) {
+ dev_err(&port->dev, "%s fail, status: %d\n", __func__, status);
+ mutex_unlock(&priv->lock);
+ return;
+ }
+
+ if (!(current_msr & UART_MSR_ANY_DELTA)) {
+ mutex_unlock(&priv->lock);
+ return;
+ }
+
+ priv->modem_status = current_msr;
+
+ if (current_msr & UART_MSR_DCTS)
+ port->icount.cts++;
+ if (current_msr & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (current_msr & UART_MSR_TERI)
+ port->icount.rng++;
+ if (current_msr & UART_MSR_DDCD) {
+ port->icount.dcd++;
+ tty = tty_port_tty_get(&port->port);
+ if (tty) {
+ usb_serial_handle_dcd_change(port, tty,
+ current_msr & UART_MSR_DCD);
+
+ tty_kref_put(tty);
+ }
+ }
+
+ wake_up_interruptible(&port->port.delta_msr_wait);
+ mutex_unlock(&priv->lock);
+}
+
+static int f81232_set_mctrl(struct usb_serial_port *port,
+ unsigned int set, unsigned int clear)
+{
+ u8 val;
+ int status;
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+ return 0; /* no change */
+
+ /* 'set' takes precedence over 'clear' */
+ clear &= ~set;
+
+ /* force enable interrupt with OUT2 */
+ mutex_lock(&priv->lock);
+ val = UART_MCR_OUT2 | priv->modem_control;
+
+ if (clear & TIOCM_DTR)
+ val &= ~UART_MCR_DTR;
+
+ if (clear & TIOCM_RTS)
+ val &= ~UART_MCR_RTS;
+
+ if (set & TIOCM_DTR)
+ val |= UART_MCR_DTR;
+
+ if (set & TIOCM_RTS)
+ val |= UART_MCR_RTS;
+
+ dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
+ val, priv->modem_control);
+
+ status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val);
+ if (status) {
+ dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
+ mutex_unlock(&priv->lock);
+ return status;
+ }
+
+ priv->modem_control = val;
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
static void f81232_update_line_status(struct usb_serial_port *port,
unsigned char *data,
- unsigned int actual_length)
+ size_t actual_length)
{
- /*
- * FIXME: Update port->icount, and call
- *
- * wake_up_interruptible(&port->port.delta_msr_wait);
- *
- * on MSR changes.
- */
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+
+ if (!actual_length)
+ return;
+
+ switch (data[0] & 0x07) {
+ case 0x00: /* msr change */
+ dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]);
+ schedule_work(&priv->interrupt_work);
+ break;
+ case 0x02: /* tx-empty */
+ break;
+ case 0x04: /* rx data available */
+ break;
+ case 0x06: /* lsr change */
+ /* we can forget it. the LSR will read from bulk-in */
+ dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]);
+ break;
+ }
}
static void f81232_read_int_callback(struct urb *urb)
@@ -104,55 +286,55 @@ exit:
static void f81232_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct f81232_private *priv = usb_get_serial_port_data(port);
unsigned char *data = urb->transfer_buffer;
- char tty_flag = TTY_NORMAL;
- unsigned long flags;
- u8 line_status;
- int i;
-
- /* update line status */
- spin_lock_irqsave(&priv->lock, flags);
- line_status = priv->line_status;
- priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
- spin_unlock_irqrestore(&priv->lock, flags);
-
- if (!urb->actual_length)
+ char tty_flag;
+ unsigned int i;
+ u8 lsr;
+
+ /*
+ * When opening the port we get a 1-byte packet with the current LSR,
+ * which we discard.
+ */
+ if ((urb->actual_length < 2) || (urb->actual_length % 2))
return;
- /* break takes precedence over parity, */
- /* which takes precedence over framing errors */
- if (line_status & UART_BREAK_ERROR)
- tty_flag = TTY_BREAK;
- else if (line_status & UART_PARITY_ERROR)
- tty_flag = TTY_PARITY;
- else if (line_status & UART_FRAME_ERROR)
- tty_flag = TTY_FRAME;
- dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
-
- /* overrun is special, not associated with a char */
- if (line_status & UART_OVERRUN_ERROR)
- tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
-
- if (port->port.console && port->sysrq) {
- for (i = 0; i < urb->actual_length; ++i)
- if (!usb_serial_handle_sysrq_char(port, data[i]))
- tty_insert_flip_char(&port->port, data[i],
- tty_flag);
- } else {
- tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
- urb->actual_length);
+ /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */
+
+ for (i = 0; i < urb->actual_length; i += 2) {
+ tty_flag = TTY_NORMAL;
+ lsr = data[i];
+
+ if (lsr & UART_LSR_BRK_ERROR_BITS) {
+ if (lsr & UART_LSR_BI) {
+ tty_flag = TTY_BREAK;
+ port->icount.brk++;
+ usb_serial_handle_break(port);
+ } else if (lsr & UART_LSR_PE) {
+ tty_flag = TTY_PARITY;
+ port->icount.parity++;
+ } else if (lsr & UART_LSR_FE) {
+ tty_flag = TTY_FRAME;
+ port->icount.frame++;
+ }
+
+ if (lsr & UART_LSR_OE) {
+ port->icount.overrun++;
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ }
+
+ if (port->port.console && port->sysrq) {
+ if (usb_serial_handle_sysrq_char(port, data[i + 1]))
+ continue;
+ }
+
+ tty_insert_flip_char(&port->port, data[i + 1], tty_flag);
}
tty_flip_buffer_push(&port->port);
}
-static int set_control_lines(struct usb_device *dev, u8 value)
-{
- /* FIXME - Stubbed out for now */
- return 0;
-}
-
static void f81232_break_ctl(struct tty_struct *tty, int break_state)
{
/* FIXME - Stubbed out for now */
@@ -164,37 +346,198 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
*/
}
+static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate)
+{
+ u8 lcr;
+ int divisor;
+ int status = 0;
+
+ divisor = calc_baud_divisor(baudrate);
+
+ status = f81232_get_register(port, LINE_CONTROL_REGISTER,
+ &lcr); /* get LCR */
+ if (status) {
+ dev_err(&port->dev, "%s failed to get LCR: %d\n",
+ __func__, status);
+ return;
+ }
+
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+ lcr | UART_LCR_DLAB); /* Enable DLAB */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+ __func__, status);
+ return;
+ }
+
+ status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER,
+ divisor & 0x00ff); /* low */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n",
+ __func__, status);
+ goto reapply_lcr;
+ }
+
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+ (divisor & 0xff00) >> 8); /* high */
+ if (status) {
+ dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n",
+ __func__, status);
+ }
+
+reapply_lcr:
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+ lcr & ~UART_LCR_DLAB);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+ __func__, status);
+ }
+}
+
+static int f81232_port_enable(struct usb_serial_port *port)
+{
+ u8 val;
+ int status;
+
+ /* fifo on, trigger8, clear TX/RX*/
+ val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT;
+
+ status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set FCR: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ /* MSR Interrupt only, LSR will read from Bulk-in odd byte */
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+ UART_IER_MSI);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set IER: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ return 0;
+}
+
+static int f81232_port_disable(struct usb_serial_port *port)
+{
+ int status;
+
+ status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set IER: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ return 0;
+}
+
static void f81232_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
- /* FIXME - Stubbed out for now */
+ u8 new_lcr = 0;
+ int status = 0;
+ speed_t baudrate;
/* Don't change anything if nothing has changed */
if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
return;
- /* Do the real work here... */
- if (old_termios)
- tty_termios_copy_hw(&tty->termios, old_termios);
+ if (C_BAUD(tty) == B0)
+ f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+ else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+ f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+
+ baudrate = tty_get_baud_rate(tty);
+ if (baudrate > 0) {
+ if (baudrate > F81232_MAX_BAUDRATE) {
+ baudrate = F81232_MAX_BAUDRATE;
+ tty_encode_baud_rate(tty, baudrate, baudrate);
+ }
+ f81232_set_baudrate(port, baudrate);
+ }
+
+ if (C_PARENB(tty)) {
+ new_lcr |= UART_LCR_PARITY;
+
+ if (!C_PARODD(tty))
+ new_lcr |= UART_LCR_EPAR;
+
+ if (C_CMSPAR(tty))
+ new_lcr |= UART_LCR_SPAR;
+ }
+
+ if (C_CSTOPB(tty))
+ new_lcr |= UART_LCR_STOP;
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ new_lcr |= UART_LCR_WLEN5;
+ break;
+ case CS6:
+ new_lcr |= UART_LCR_WLEN6;
+ break;
+ case CS7:
+ new_lcr |= UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ new_lcr |= UART_LCR_WLEN8;
+ break;
+ }
+
+ status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr);
+ if (status) {
+ dev_err(&port->dev, "%s failed to set LCR: %d\n",
+ __func__, status);
+ }
}
static int f81232_tiocmget(struct tty_struct *tty)
{
- /* FIXME - Stubbed out for now */
- return 0;
+ int r;
+ struct usb_serial_port *port = tty->driver_data;
+ struct f81232_private *port_priv = usb_get_serial_port_data(port);
+ u8 mcr, msr;
+
+ /* force get current MSR changed state */
+ f81232_read_msr(port);
+
+ mutex_lock(&port_priv->lock);
+ mcr = port_priv->modem_control;
+ msr = port_priv->modem_status;
+ mutex_unlock(&port_priv->lock);
+
+ r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+ (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+ (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+ (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+ (msr & UART_MSR_RI ? TIOCM_RI : 0) |
+ (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+ return r;
}
static int f81232_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
- /* FIXME - Stubbed out for now */
- return 0;
+ struct usb_serial_port *port = tty->driver_data;
+
+ return f81232_set_mctrl(port, set, clear);
}
static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result;
+ result = f81232_port_enable(port);
+ if (result)
+ return result;
+
/* Setup termios */
if (tty)
f81232_set_termios(tty, port, NULL);
@@ -217,59 +560,73 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
static void f81232_close(struct usb_serial_port *port)
{
+ f81232_port_disable(port);
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
}
static void f81232_dtr_rts(struct usb_serial_port *port, int on)
{
- struct f81232_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
- u8 control;
-
- spin_lock_irqsave(&priv->lock, flags);
- /* Change DTR and RTS */
if (on)
- priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+ f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
else
- priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
- control = priv->line_control;
- spin_unlock_irqrestore(&priv->lock, flags);
- set_control_lines(port->serial->dev, control);
+ f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
}
static int f81232_carrier_raised(struct usb_serial_port *port)
{
+ u8 msr;
struct f81232_private *priv = usb_get_serial_port_data(port);
- if (priv->line_status & UART_DCD)
+
+ mutex_lock(&priv->lock);
+ msr = priv->modem_status;
+ mutex_unlock(&priv->lock);
+
+ if (msr & UART_MSR_DCD)
return 1;
return 0;
}
+static int f81232_get_serial_info(struct usb_serial_port *port,
+ unsigned long arg)
+{
+ struct serial_struct ser;
+
+ memset(&ser, 0, sizeof(ser));
+
+ ser.type = PORT_16550A;
+ ser.line = port->minor;
+ ser.port = port->port_number;
+ ser.baud_base = F81232_MAX_BAUDRATE;
+
+ if (copy_to_user((void __user *)arg, &ser, sizeof(ser)))
+ return -EFAULT;
+
+ return 0;
+}
+
static int f81232_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
- struct serial_struct ser;
struct usb_serial_port *port = tty->driver_data;
switch (cmd) {
case TIOCGSERIAL:
- memset(&ser, 0, sizeof ser);
- ser.type = PORT_16654;
- ser.line = port->minor;
- ser.port = port->port_number;
- ser.baud_base = 460800;
-
- if (copy_to_user((void __user *)arg, &ser, sizeof ser))
- return -EFAULT;
-
- return 0;
+ return f81232_get_serial_info(port, arg);
default:
break;
}
return -ENOIOCTLCMD;
}
+static void f81232_interrupt_work(struct work_struct *work)
+{
+ struct f81232_private *priv =
+ container_of(work, struct f81232_private, interrupt_work);
+
+ f81232_read_msr(priv->port);
+}
+
static int f81232_port_probe(struct usb_serial_port *port)
{
struct f81232_private *priv;
@@ -278,11 +635,13 @@ static int f81232_port_probe(struct usb_serial_port *port)
if (!priv)
return -ENOMEM;
- spin_lock_init(&priv->lock);
+ mutex_init(&priv->lock);
+ INIT_WORK(&priv->interrupt_work, f81232_interrupt_work);
usb_set_serial_port_data(port, priv);
port->port.drain_delay = 256;
+ priv->port = port;
return 0;
}
@@ -308,7 +667,7 @@ static struct usb_serial_driver f81232_device = {
.bulk_out_size = 256,
.open = f81232_open,
.close = f81232_close,
- .dtr_rts = f81232_dtr_rts,
+ .dtr_rts = f81232_dtr_rts,
.carrier_raised = f81232_carrier_raised,
.ioctl = f81232_ioctl,
.break_ctl = f81232_break_ctl,
@@ -330,5 +689,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
-MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org");
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>");
+MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>");
MODULE_LICENSE("GPL v2");
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.