diff options
Diffstat (limited to 'drivers/usb/serial/ftdi_sio.c')
| -rw-r--r-- | drivers/usb/serial/ftdi_sio.c | 27 |
1 files changed, 13 insertions, 14 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 94398f89e600..c867592477c9 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1069,7 +1069,7 @@ static const char *ftdi_chip_name[] = { static int ftdi_sio_probe(struct usb_serial *serial, const struct usb_device_id *id); static int ftdi_sio_port_probe(struct usb_serial_port *port); -static int ftdi_sio_port_remove(struct usb_serial_port *port); +static void ftdi_sio_port_remove(struct usb_serial_port *port); static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port); static void ftdi_dtr_rts(struct usb_serial_port *port, int on); static void ftdi_process_read_urb(struct urb *urb); @@ -1153,13 +1153,13 @@ static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base) divisor = divisor3 >> 3; divisor3 &= 0x7; if (divisor3 == 1) - divisor |= 0xc000; + divisor |= 0xc000; /* +0.125 */ else if (divisor3 >= 4) - divisor |= 0x4000; + divisor |= 0x4000; /* +0.5 */ else if (divisor3 != 0) - divisor |= 0x8000; + divisor |= 0x8000; /* +0.25 */ else if (divisor == 1) - divisor = 0; /* special case for maximum baud rate */ + divisor = 0; /* special case for maximum baud rate */ return divisor; } @@ -1177,9 +1177,9 @@ static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) divisor = divisor3 >> 3; divisor |= (u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ - if (divisor == 1) + if (divisor == 1) /* 1.0 */ divisor = 0; - else if (divisor == 0x4001) + else if (divisor == 0x4001) /* 1.5 */ divisor = 1; return divisor; } @@ -1201,9 +1201,9 @@ static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) divisor = divisor3 >> 3; divisor |= (u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ - if (divisor == 1) + if (divisor == 1) /* 1.0 */ divisor = 0; - else if (divisor == 0x4001) + else if (divisor == 0x4001) /* 1.5 */ divisor = 1; /* * Set this bit to turn off a divide by 2.5 on baud rate generator @@ -1386,8 +1386,9 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) index_value = get_ftdi_divisor(tty, port); value = (u16)index_value; index = (u16)(index_value >> 16); - if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) || - (priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) { + if (priv->chip_type == FT2232C || priv->chip_type == FT2232H || + priv->chip_type == FT4232H || priv->chip_type == FT232H || + priv->chip_type == FTX) { /* Probably the BM type needs the MSB of the encoded fractional * divider also moved like for the chips above. Any infos? */ index = (u16)((index << 8) | priv->interface); @@ -2399,7 +2400,7 @@ static int ftdi_stmclite_probe(struct usb_serial *serial) return 0; } -static int ftdi_sio_port_remove(struct usb_serial_port *port) +static void ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -2408,8 +2409,6 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) remove_sysfs_attrs(port); kfree(priv); - - return 0; } static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) |