diff options
Diffstat (limited to 'drivers/usb/serial/spcp8x5.c')
| -rw-r--r-- | drivers/usb/serial/spcp8x5.c | 73 |
1 files changed, 39 insertions, 34 deletions
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 55b2570b8b8b..283cf6b36b2c 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -208,7 +208,7 @@ static inline unsigned int ringbuf_avail_data(struct ringbuf *pb) { if (pb == NULL) return 0; - return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size); + return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size; } /* get the number of space in the pipo */ @@ -216,7 +216,7 @@ static inline unsigned int ringbuf_avail_space(struct ringbuf *pb) { if (pb == NULL) return 0; - return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size); + return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size; } /* put count data into pipo */ @@ -448,7 +448,8 @@ static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, /* close the serial port. We should wait for data sending to device 1st and * then kill all urb. */ -static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) +static void spcp8x5_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; @@ -464,7 +465,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) spin_lock_irqsave(&priv->lock, flags); timeout = SPCP8x5_CLOSING_WAIT; init_waitqueue_entry(&wait, current); - add_wait_queue(&port->tty->write_wait, &wait); + add_wait_queue(&tty->write_wait, &wait); for (;;) { set_current_state(TASK_INTERRUPTIBLE); if (ringbuf_avail_data(priv->buf) == 0 || @@ -475,7 +476,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) spin_lock_irqsave(&priv->lock, flags); } set_current_state(TASK_RUNNING); - remove_wait_queue(&port->tty->write_wait, &wait); + remove_wait_queue(&tty->write_wait, &wait); /* clear out any remaining data in the buffer */ clear_ringbuf(priv->buf); @@ -486,7 +487,7 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) * flow control for data rates of 1200 bps or more, for lower rates we * should really know how much data is in the buffer to compute a delay * that is not unnecessarily long) */ - bps = tty_get_baud_rate(port->tty); + bps = tty_get_baud_rate(tty); if (bps > 1200) timeout = max((HZ*2560) / bps, HZ/10); else @@ -495,8 +496,8 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) schedule_timeout(timeout); /* clear control lines */ - if (port->tty) { - c_cflag = port->tty->termios->c_cflag; + if (tty) { + c_cflag = tty->termios->c_cflag; if (c_cflag & HUPCL) { spin_lock_irqsave(&priv->lock, flags); priv->line_control = 0; @@ -518,14 +519,14 @@ static void spcp8x5_close(struct usb_serial_port *port, struct file *filp) } /* set the serial param for transfer. we should check if we really need to - * transfer. then if be set flow contorl we should do this too. */ -static void spcp8x5_set_termios(struct usb_serial_port *port, - struct ktermios *old_termios) + * transfer. if we set flow control we should do this too. */ +static void spcp8x5_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; - unsigned int cflag = port->tty->termios->c_cflag; + unsigned int cflag = tty->termios->c_cflag; unsigned int old_cflag = old_termios->c_cflag; unsigned short uartdata; unsigned char buf[2] = {0, 0}; @@ -533,21 +534,19 @@ static void spcp8x5_set_termios(struct usb_serial_port *port, int i; u8 control; - if ((!port->tty) || (!port->tty->termios)) - return; - /* for the 1st time call this function */ spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { - *(port->tty->termios) = tty_std_termios; - port->tty->termios->c_cflag = B115200 | CS8 | CREAD | - HUPCL | CLOCAL; + *(tty->termios) = tty_std_termios; + tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios->c_ispeed = 115200; + tty->termios->c_ospeed = 115200; priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); /* check that they really want us to change something */ - if (!tty_termios_hw_change(port->tty->termios, old_termios)) + if (!tty_termios_hw_change(tty->termios, old_termios)) return; /* set DTR/RTS active */ @@ -567,7 +566,7 @@ static void spcp8x5_set_termios(struct usb_serial_port *port, } /* Set Baud Rate */ - baud = tty_get_baud_rate(port->tty);; + baud = tty_get_baud_rate(tty);; switch (baud) { case 300: buf[0] = 0x00; break; case 600: buf[0] = 0x01; break; @@ -643,7 +642,8 @@ static void spcp8x5_set_termios(struct usb_serial_port *port, /* open the serial port. do some usb system call. set termios and get the line * status of the device. then submit the read urb */ -static int spcp8x5_open(struct usb_serial_port *port, struct file *filp) +static int spcp8x5_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; @@ -665,7 +665,7 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp) return ret; spin_lock_irqsave(&priv->lock, flags); - if (port->tty->termios->c_cflag & CBAUD) + if (tty && (tty->termios->c_cflag & CBAUD)) priv->line_control = MCR_DTR | MCR_RTS; else priv->line_control = 0; @@ -674,8 +674,8 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp) spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); /* Setup termios */ - if (port->tty) - spcp8x5_set_termios(port, &tmp_termios); + if (tty) + spcp8x5_set_termios(tty, port, &tmp_termios); spcp8x5_get_msr(serial->dev, &status, priv->type); @@ -690,7 +690,7 @@ static int spcp8x5_open(struct usb_serial_port *port, struct file *filp) port->read_urb->dev = serial->dev; ret = usb_submit_urb(port->read_urb, GFP_KERNEL); if (ret) { - spcp8x5_close(port, NULL); + spcp8x5_close(tty, port, NULL); return -EPROTO; } return 0; @@ -717,7 +717,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) /* check the urb status */ if (urb->status) { - if (!port->open_count) + if (!port->port.count) return; if (urb->status == -EPROTO) { /* spcp8x5 mysteriously fails with -EPROTO */ @@ -755,7 +755,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) tty_flag = TTY_FRAME; dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag); - tty = port->tty; + tty = port->port.tty; if (tty && urb->actual_length) { tty_buffer_request_room(tty, urb->actual_length + 1); /* overrun is special, not associated with a char */ @@ -767,7 +767,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb) } /* Schedule the next read _if_ we are still open */ - if (port->open_count) { + if (port->port.count) { urb->dev = port->serial->dev; result = usb_submit_urb(urb , GFP_ATOMIC); if (result) @@ -866,7 +866,7 @@ static void spcp8x5_write_bulk_callback(struct urb *urb) } /* write data to ring buffer. and then start the write transfer */ -static int spcp8x5_write(struct usb_serial_port *port, +static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { struct spcp8x5_private *priv = usb_get_serial_port_data(port); @@ -925,9 +925,10 @@ static int spcp8x5_wait_modem_info(struct usb_serial_port *port, return 0; } -static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file, +static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); switch (cmd) { @@ -943,9 +944,10 @@ static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file, return -ENOIOCTLCMD; } -static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file, +static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { + struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; @@ -965,8 +967,9 @@ static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file, return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); } -static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file) +static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file) { + struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int mcr; @@ -989,8 +992,9 @@ static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file) } /* get the avail space room in ring buffer */ -static int spcp8x5_write_room(struct usb_serial_port *port) +static int spcp8x5_write_room(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int room = 0; unsigned long flags; @@ -1003,8 +1007,9 @@ static int spcp8x5_write_room(struct usb_serial_port *port) } /* get the number of avail data in write ring buffer */ -static int spcp8x5_chars_in_buffer(struct usb_serial_port *port) +static int spcp8x5_chars_in_buffer(struct tty_struct *tty) { + struct usb_serial_port *port = tty->driver_data; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; |