diff options
Diffstat (limited to 'drivers/usb/serial/visor.c')
| -rw-r--r-- | drivers/usb/serial/visor.c | 170 |
1 files changed, 23 insertions, 147 deletions
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 31c57adcb623..a473c1c34559 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -7,139 +7,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (06/03/2003) Judd Montgomery <judd at jpilot.org> - * Added support for module parameter options for untested/unknown - * devices. - * - * (03/09/2003) gkh - * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl - * <brachtl@redgrep.cz> for the information. - * - * (03/05/2003) gkh - * Think Treo support is now working. - * - * (04/03/2002) gkh - * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI - * <hiro@zob.ne.jp> for the information. - * - * (03/27/2002) gkh - * Removed assumptions that port->tty was always valid (is not true - * for usb serial console devices.) - * - * (03/23/2002) gkh - * Added support for the Palm i705 device, thanks to Thomas Riemer - * <tom@netmech.com> for the information. - * - * (03/21/2002) gkh - * Added support for the Palm m130 device, thanks to Udo Eisenbarth - * <udo.eisenbarth@web.de> for the information. - * - * (02/27/2002) gkh - * Reworked the urb handling logic. We have no more pool, but dynamically - * allocate the urb and the transfer buffer on the fly. In testing this - * does not incure any measurable overhead. This also relies on the fact - * that we have proper reference counting logic for urbs. - * - * (02/21/2002) SilaS - * Added initial support for the Palm m515 devices. - * - * (02/14/2002) gkh - * Added support for the Clie S-360 device. - * - * (12/18/2001) gkh - * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand - * for the patch. - * - * (11/11/2001) gkh - * Added support for the m125 devices, and added check to prevent oopses - * for Clié devices that lie about the number of ports they have. - * - * (08/30/2001) gkh - * Added support for the Clie devices, both the 3.5 and 4.0 os versions. - * Many thanks to Daniel Burke, and Bryan Payne for helping with this. - * - * (08/23/2001) gkh - * fixed a few potential bugs pointed out by Oliver Neukum. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (05/28/2000) gkh - * Added initial support for the Palm m500 and Palm m505 devices. - * - * (04/08/2001) gb - * Identify version on module load. - * - * (01/21/2000) gkh - * Added write_room and chars_in_buffer, as they were previously using the - * generic driver versions which is all wrong now that we are using an urb - * pool. Thanks to Wolfgang Grandegger for pointing this out to me. - * Removed count assignment in the write function, which was not needed anymore - * either. Thanks to Al Borchers for pointing this out. - * - * (12/12/2000) gkh - * Moved MOD_DEC to end of visor_close to be nicer, as the final write - * message can sleep. - * - * (11/12/2000) gkh - * Fixed bug with data being dropped on the floor by forcing tty->low_latency - * to be on. Hopefully this fixes the OHCI issue! - * - * (11/01/2000) Adam J. Richter - * usb_device_id table support - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Got rid of always calling kmalloc for every urb we wrote out to the - * device. - * Added visor_read_callback so we can keep track of bytes in and out for - * those people who like to know the speed of their device. - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (09/06/2000) gkh - * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ - * the host controller drivers set urb->dev = NULL when the urb is finished. - * - * (08/28/2000) gkh - * Added locks for SMP safeness. - * - * (08/08/2000) gkh - * Fixed endian problem in visor_startup. - * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more - * than once. - * - * (07/23/2000) gkh - * Added pool of write urbs to speed up transfers to the visor. - * - * (07/19/2000) gkh - * Added module_init and module_exit functions to handle the fact that this - * driver is a loadable module now. - * - * (07/03/2000) gkh - * Added visor_set_ioctl and visor_set_termios functions (they don't do much - * of anything, but are good for debugging.) - * - * (06/25/2000) gkh - * Fixed bug in visor_unthrottle that should help with the disconnect in PPP - * bug that people have been reporting. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (04/27/2000) Ryan VanderBijl - * Fixed memory leak in visor_close - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * */ #include <linux/config.h> @@ -161,7 +32,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.1" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>" #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" @@ -311,10 +181,12 @@ static struct usb_driver visor_driver = { }; /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ -static struct usb_serial_device_type handspring_device = { - .owner = THIS_MODULE, - .name = "Handspring Visor / Palm OS", - .short_name = "visor", +static struct usb_serial_driver handspring_device = { + .driver = { + .owner = THIS_MODULE, + .name = "visor", + }, + .description = "Handspring Visor / Palm OS", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -339,10 +211,12 @@ static struct usb_serial_device_type handspring_device = { }; /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ -static struct usb_serial_device_type clie_5_device = { - .owner = THIS_MODULE, - .name = "Sony Clie 5.0", - .short_name = "clie_5", +static struct usb_serial_driver clie_5_device = { + .driver = { + .owner = THIS_MODULE, + .name = "clie_5", + }, + .description = "Sony Clie 5.0", .id_table = clie_id_5_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -367,10 +241,12 @@ static struct usb_serial_device_type clie_5_device = { }; /* device info for the Sony Clie OS version 3.5 */ -static struct usb_serial_device_type clie_3_5_device = { - .owner = THIS_MODULE, - .name = "Sony Clie 3.5", - .short_name = "clie_3.5", +static struct usb_serial_driver clie_3_5_device = { + .driver = { + .owner = THIS_MODULE, + .name = "clie_3.5", + }, + .description = "Sony Clie 3.5", .id_table = clie_id_3_5_table, .num_interrupt_in = 0, .num_bulk_in = 1, @@ -782,7 +658,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i break; } dev_info(dev, "%s: port %d, is for %s use\n", - serial->type->name, + serial->type->description, connection_info->connections[i].port, string); } } @@ -791,11 +667,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i */ if (num_ports == 0 || num_ports > 2) { dev_warn (dev, "%s: No valid connect info available\n", - serial->type->name); + serial->type->description); num_ports = 2; } - dev_info(dev, "%s: Number of ports: %d\n", serial->type->name, + dev_info(dev, "%s: Number of ports: %d\n", serial->type->description, num_ports); /* @@ -1125,7 +1001,7 @@ static int __init visor_init (void) retval = usb_register(&visor_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: |