aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/Kconfig3
-rw-r--r--drivers/usb/serial/ch341.c6
-rw-r--r--drivers/usb/serial/cyberjack.c2
-rw-r--r--drivers/usb/serial/garmin_gps.c2
-rw-r--r--drivers/usb/serial/io_edgeport.c26
-rw-r--r--drivers/usb/serial/ir-usb.c185
-rw-r--r--drivers/usb/serial/keyspan.c4
-rw-r--r--drivers/usb/serial/opticon.c63
-rw-r--r--drivers/usb/serial/option.c16
-rw-r--r--drivers/usb/serial/quatech2.c6
-rw-r--r--drivers/usb/serial/usb-serial-simple.c2
-rw-r--r--drivers/usb/serial/usb-serial.c3
-rw-r--r--drivers/usb/serial/usb-wwan.h1
-rw-r--r--drivers/usb/serial/usb_wwan.c4
14 files changed, 217 insertions, 106 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index ed4a18b435a0..25d7e0c36d38 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -129,9 +129,6 @@ config USB_SERIAL_DIGI_ACCELEPORT
parallel port on the USB 2 appears as a third serial port on Linux.
The Digi Acceleport USB 8 is not yet supported by this driver.
- This driver works under SMP with the usb-uhci driver. It does not
- work under SMP with the uhci driver.
-
To compile this driver as a module, choose M here: the
module will be called digi_acceleport.
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index df582fe855f0..d3f420f3a083 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -642,9 +642,13 @@ static int ch341_tiocmget(struct tty_struct *tty)
static int ch341_reset_resume(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
- struct ch341_private *priv = usb_get_serial_port_data(port);
+ struct ch341_private *priv;
int ret;
+ priv = usb_get_serial_port_data(port);
+ if (!priv)
+ return 0;
+
/* reconfigure ch341 serial port after bus-reset */
ch341_configure(serial->dev, priv);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index ebd76ab07b72..821970609695 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -276,7 +276,7 @@ static void cyberjack_read_int_callback(struct urb *urb)
old_rdtodo = priv->rdtodo;
if (old_rdtodo > SHRT_MAX - size) {
- dev_dbg(dev, "To many bulk_in urbs to do.\n");
+ dev_dbg(dev, "Too many bulk_in urbs to do.\n");
spin_unlock_irqrestore(&priv->lock, flags);
goto resubmit;
}
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 633550ec3025..ffd984142171 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -104,7 +104,7 @@ struct garmin_packet {
int seq;
/* the real size of the data array, always > 0 */
int size;
- __u8 data[1];
+ __u8 data[];
};
/* structure used to keep the current state of the driver */
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 48a439298a68..5737add6a2a4 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -716,7 +716,7 @@ static void edge_interrupt_callback(struct urb *urb)
if (txCredits) {
port = edge_serial->serial->port[portNumber];
edge_port = usb_get_serial_port_data(port);
- if (edge_port->open) {
+ if (edge_port && edge_port->open) {
spin_lock_irqsave(&edge_port->ep_lock,
flags);
edge_port->txCredits += txCredits;
@@ -1725,7 +1725,8 @@ static void edge_break(struct tty_struct *tty, int break_state)
static void process_rcvd_data(struct edgeport_serial *edge_serial,
unsigned char *buffer, __u16 bufferLength)
{
- struct device *dev = &edge_serial->serial->dev->dev;
+ struct usb_serial *serial = edge_serial->serial;
+ struct device *dev = &serial->dev->dev;
struct usb_serial_port *port;
struct edgeport_port *edge_port;
__u16 lastBufferLength;
@@ -1821,11 +1822,10 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
/* spit this data back into the tty driver if this
port is open */
- if (rxLen) {
- port = edge_serial->serial->port[
- edge_serial->rxPort];
+ if (rxLen && edge_serial->rxPort < serial->num_ports) {
+ port = serial->port[edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
- if (edge_port->open) {
+ if (edge_port && edge_port->open) {
dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n",
__func__, rxLen,
edge_serial->rxPort);
@@ -1833,8 +1833,8 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
rxLen);
edge_port->port->icount.rx += rxLen;
}
- buffer += rxLen;
}
+ buffer += rxLen;
break;
case EXPECT_HDR3: /* Expect 3rd byte of status header */
@@ -1869,6 +1869,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
__u8 code = edge_serial->rxStatusCode;
/* switch the port pointer to the one being currently talked about */
+ if (edge_serial->rxPort >= edge_serial->serial->num_ports)
+ return;
port = edge_serial->serial->port[edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
if (edge_port == NULL) {
@@ -2901,16 +2903,18 @@ static int edge_startup(struct usb_serial *serial)
response = 0;
if (edge_serial->is_epic) {
+ struct usb_host_interface *alt;
+
+ alt = serial->interface->cur_altsetting;
+
/* EPIC thing, set up our interrupt polling now and our read
* urb, so that the device knows it really is connected. */
interrupt_in_found = bulk_in_found = bulk_out_found = false;
- for (i = 0; i < serial->interface->altsetting[0]
- .desc.bNumEndpoints; ++i) {
+ for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
struct usb_endpoint_descriptor *endpoint;
int buffer_size;
- endpoint = &serial->interface->altsetting[0].
- endpoint[i].desc;
+ endpoint = &alt->endpoint[i].desc;
buffer_size = usb_endpoint_maxp(endpoint);
if (!interrupt_in_found &&
(usb_endpoint_is_int_in(endpoint))) {
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 302eb9530859..79d0586e2b33 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -45,9 +45,10 @@ static int buffer_size;
static int xbof = -1;
static int ir_startup (struct usb_serial *serial);
-static int ir_open(struct tty_struct *tty, struct usb_serial_port *port);
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
- void *dest, size_t size);
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+static int ir_write_room(struct tty_struct *tty);
+static void ir_write_bulk_callback(struct urb *urb);
static void ir_process_read_urb(struct urb *urb);
static void ir_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios);
@@ -75,10 +76,13 @@ static struct usb_serial_driver ir_device = {
.description = "IR Dongle",
.id_table = ir_id_table,
.num_ports = 1,
+ .num_bulk_in = 1,
+ .num_bulk_out = 1,
.set_termios = ir_set_termios,
.attach = ir_startup,
- .open = ir_open,
- .prepare_write_buffer = ir_prepare_write_buffer,
+ .write = ir_write,
+ .write_room = ir_write_room,
+ .write_bulk_callback = ir_write_bulk_callback,
.process_read_urb = ir_process_read_urb,
};
@@ -251,35 +255,102 @@ static int ir_startup(struct usb_serial *serial)
return 0;
}
-static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count)
{
- int i;
+ struct urb *urb = NULL;
+ unsigned long flags;
+ int ret;
- for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
- port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET;
+ if (port->bulk_out_size == 0)
+ return -EINVAL;
- /* Start reading from the device */
- return usb_serial_generic_open(tty, port);
-}
+ if (count == 0)
+ return 0;
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
- void *dest, size_t size)
-{
- unsigned char *buf = dest;
- int count;
+ count = min(count, port->bulk_out_size - 1);
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (__test_and_clear_bit(0, &port->write_urbs_free)) {
+ urb = port->write_urbs[0];
+ port->tx_bytes += count;
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ if (!urb)
+ return 0;
/*
* The first byte of the packet we send to the device contains an
- * inbound header which indicates an additional number of BOFs and
+ * outbound header which indicates an additional number of BOFs and
* a baud rate change.
*
* See section 5.4.2.2 of the USB IrDA spec.
*/
- *buf = ir_xbof | ir_baud;
+ *(u8 *)urb->transfer_buffer = ir_xbof | ir_baud;
+
+ memcpy(urb->transfer_buffer + 1, buf, count);
+
+ urb->transfer_buffer_length = count + 1;
+ urb->transfer_flags = URB_ZERO_PACKET;
+
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret) {
+ dev_err(&port->dev, "failed to submit write urb: %d\n", ret);
+
+ spin_lock_irqsave(&port->lock, flags);
+ __set_bit(0, &port->write_urbs_free);
+ port->tx_bytes -= count;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return ret;
+ }
+
+ return count;
+}
+
+static void ir_write_bulk_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ int status = urb->status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ __set_bit(0, &port->write_urbs_free);
+ port->tx_bytes -= urb->transfer_buffer_length - 1;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ switch (status) {
+ case 0:
+ break;
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&port->dev, "write urb stopped: %d\n", status);
+ return;
+ case -EPIPE:
+ dev_err(&port->dev, "write urb stopped: %d\n", status);
+ return;
+ default:
+ dev_err(&port->dev, "nonzero write-urb status: %d\n", status);
+ break;
+ }
+
+ usb_serial_port_softint(port);
+}
- count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1,
- &port->lock);
- return count + 1;
+static int ir_write_room(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ int count = 0;
+
+ if (port->bulk_out_size == 0)
+ return 0;
+
+ if (test_bit(0, &port->write_urbs_free))
+ count = port->bulk_out_size - 1;
+
+ return count;
}
static void ir_process_read_urb(struct urb *urb)
@@ -304,23 +375,15 @@ static void ir_process_read_urb(struct urb *urb)
tty_flip_buffer_push(&port->port);
}
-static void ir_set_termios_callback(struct urb *urb)
-{
- kfree(urb->transfer_buffer);
-
- if (urb->status)
- dev_dbg(&urb->dev->dev, "%s - non-zero urb status: %d\n",
- __func__, urb->status);
-}
-
static void ir_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
- struct urb *urb;
+ struct usb_device *udev = port->serial->dev;
unsigned char *transfer_buffer;
- int result;
+ int actual_length;
speed_t baud;
int ir_baud;
+ int ret;
baud = tty_get_baud_rate(tty);
@@ -332,34 +395,34 @@ static void ir_set_termios(struct tty_struct *tty,
switch (baud) {
case 2400:
- ir_baud = USB_IRDA_BR_2400;
+ ir_baud = USB_IRDA_LS_2400;
break;
case 9600:
- ir_baud = USB_IRDA_BR_9600;
+ ir_baud = USB_IRDA_LS_9600;
break;
case 19200:
- ir_baud = USB_IRDA_BR_19200;
+ ir_baud = USB_IRDA_LS_19200;
break;
case 38400:
- ir_baud = USB_IRDA_BR_38400;
+ ir_baud = USB_IRDA_LS_38400;
break;
case 57600:
- ir_baud = USB_IRDA_BR_57600;
+ ir_baud = USB_IRDA_LS_57600;
break;
case 115200:
- ir_baud = USB_IRDA_BR_115200;
+ ir_baud = USB_IRDA_LS_115200;
break;
case 576000:
- ir_baud = USB_IRDA_BR_576000;
+ ir_baud = USB_IRDA_LS_576000;
break;
case 1152000:
- ir_baud = USB_IRDA_BR_1152000;
+ ir_baud = USB_IRDA_LS_1152000;
break;
case 4000000:
- ir_baud = USB_IRDA_BR_4000000;
+ ir_baud = USB_IRDA_LS_4000000;
break;
default:
- ir_baud = USB_IRDA_BR_9600;
+ ir_baud = USB_IRDA_LS_9600;
baud = 9600;
}
@@ -375,42 +438,22 @@ static void ir_set_termios(struct tty_struct *tty,
/*
* send the baud change out on an "empty" data packet
*/
- urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb)
- return;
-
transfer_buffer = kmalloc(1, GFP_KERNEL);
if (!transfer_buffer)
- goto err_buf;
+ return;
*transfer_buffer = ir_xbof | ir_baud;
- usb_fill_bulk_urb(
- urb,
- port->serial->dev,
- usb_sndbulkpipe(port->serial->dev,
- port->bulk_out_endpointAddress),
- transfer_buffer,
- 1,
- ir_set_termios_callback,
- port);
-
- urb->transfer_flags = URB_ZERO_PACKET;
-
- result = usb_submit_urb(urb, GFP_KERNEL);
- if (result) {
- dev_err(&port->dev, "%s - failed to submit urb: %d\n",
- __func__, result);
- goto err_subm;
+ ret = usb_bulk_msg(udev,
+ usb_sndbulkpipe(udev, port->bulk_out_endpointAddress),
+ transfer_buffer, 1, &actual_length, 5000);
+ if (ret || actual_length != 1) {
+ if (actual_length != 1)
+ ret = -EIO;
+ dev_err(&port->dev, "failed to change line speed: %d\n", ret);
}
- usb_free_urb(urb);
-
- return;
-err_subm:
kfree(transfer_buffer);
-err_buf:
- usb_free_urb(urb);
}
static int __init ir_init(void)
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index e66a59ef43a1..aa3dbce22cfb 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1058,6 +1058,8 @@ static void usa49_glocont_callback(struct urb *urb)
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ continue;
if (p_priv->resend_cont) {
dev_dbg(&port->dev, "%s - sending setup\n", __func__);
@@ -1459,6 +1461,8 @@ static void usa67_glocont_callback(struct urb *urb)
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ continue;
if (p_priv->resend_cont) {
dev_dbg(&port->dev, "%s - sending setup\n", __func__);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index cb7aac9cd9e7..0af76800bd78 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -41,6 +41,9 @@ struct opticon_private {
bool rts;
bool cts;
int outstanding_urbs;
+ int outstanding_bytes;
+
+ struct usb_anchor anchor;
};
@@ -113,7 +116,7 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
requesttype,
USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
- 0, 0, buffer, 1, 0);
+ 0, 0, buffer, 1, USB_CTRL_SET_TIMEOUT);
kfree(buffer);
if (retval < 0)
@@ -149,6 +152,15 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
return res;
}
+static void opticon_close(struct usb_serial_port *port)
+{
+ struct opticon_private *priv = usb_get_serial_port_data(port);
+
+ usb_kill_anchored_urbs(&priv->anchor);
+
+ usb_serial_generic_close(port);
+}
+
static void opticon_write_control_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
@@ -169,6 +181,7 @@ static void opticon_write_control_callback(struct urb *urb)
spin_lock_irqsave(&priv->lock, flags);
--priv->outstanding_urbs;
+ priv->outstanding_bytes -= urb->transfer_buffer_length;
spin_unlock_irqrestore(&priv->lock, flags);
usb_serial_port_softint(port);
@@ -182,8 +195,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
struct urb *urb;
unsigned char *buffer;
unsigned long flags;
- int status;
struct usb_ctrlrequest *dr;
+ int ret = -ENOMEM;
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
@@ -192,19 +205,16 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
return 0;
}
priv->outstanding_urbs++;
+ priv->outstanding_bytes += count;
spin_unlock_irqrestore(&priv->lock, flags);
buffer = kmalloc(count, GFP_ATOMIC);
- if (!buffer) {
- count = -ENOMEM;
+ if (!buffer)
goto error_no_buffer;
- }
urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!urb) {
- count = -ENOMEM;
+ if (!urb)
goto error_no_urb;
- }
memcpy(buffer, buf, count);
@@ -213,10 +223,8 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
/* The connected devices do not have a bulk write endpoint,
* to transmit data to de barcode device the control endpoint is used */
dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
- if (!dr) {
- count = -ENOMEM;
+ if (!dr)
goto error_no_dr;
- }
dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT;
dr->bRequest = 0x01;
@@ -229,13 +237,13 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
(unsigned char *)dr, buffer, count,
opticon_write_control_callback, port);
+ usb_anchor_urb(urb, &priv->anchor);
+
/* send it down the pipe */
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status) {
- dev_err(&port->dev,
- "%s - usb_submit_urb(write endpoint) failed status = %d\n",
- __func__, status);
- count = status;
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret) {
+ dev_err(&port->dev, "failed to submit write urb: %d\n", ret);
+ usb_unanchor_urb(urb);
goto error;
}
@@ -253,8 +261,10 @@ error_no_urb:
error_no_buffer:
spin_lock_irqsave(&priv->lock, flags);
--priv->outstanding_urbs;
+ priv->outstanding_bytes -= count;
spin_unlock_irqrestore(&priv->lock, flags);
- return count;
+
+ return ret;
}
static int opticon_write_room(struct tty_struct *tty)
@@ -279,6 +289,20 @@ static int opticon_write_room(struct tty_struct *tty)
return 2048;
}
+static int opticon_chars_in_buffer(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct opticon_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ int count;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ count = priv->outstanding_bytes;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return count;
+}
+
static int opticon_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -354,6 +378,7 @@ static int opticon_port_probe(struct usb_serial_port *port)
return -ENOMEM;
spin_lock_init(&priv->lock);
+ init_usb_anchor(&priv->anchor);
usb_set_serial_port_data(port, priv);
@@ -381,8 +406,10 @@ static struct usb_serial_driver opticon_device = {
.port_probe = opticon_port_probe,
.port_remove = opticon_port_remove,
.open = opticon_open,
+ .close = opticon_close,
.write = opticon_write,
.write_room = opticon_write_room,
+ .chars_in_buffer = opticon_chars_in_buffer,
.throttle = usb_serial_generic_throttle,
.unthrottle = usb_serial_generic_unthrottle,
.get_serial = get_serial_info,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e9491d400a24..084cc2fff3ae 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -248,6 +248,7 @@ static void option_instat_callback(struct urb *urb);
#define QUECTEL_PRODUCT_BG96 0x0296
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM12 0x0512
+#define QUECTEL_PRODUCT_RM500Q 0x0800
#define CMOTECH_VENDOR_ID 0x16d8
#define CMOTECH_PRODUCT_6001 0x6001
@@ -567,6 +568,9 @@ static void option_instat_callback(struct urb *urb);
/* Interface must have two endpoints */
#define NUMEP2 BIT(16)
+/* Device needs ZLP */
+#define ZLP BIT(17)
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -1101,6 +1105,11 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
+ .driver_info = ZLP },
+
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
@@ -1172,6 +1181,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = NCTRL(0) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff), /* Telit ME910 (ECM) */
.driver_info = NCTRL(0) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110a, 0xff), /* Telit ME910G1 */
+ .driver_info = NCTRL(0) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
@@ -1196,6 +1207,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
.driver_info = NCTRL(0) },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
+ .driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) },
@@ -2097,6 +2110,9 @@ static int option_attach(struct usb_serial *serial)
if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber)))
data->use_send_setup = 1;
+ if (device_flags & ZLP)
+ data->use_zlp = 1;
+
spin_lock_init(&data->susp_lock);
usb_set_serial_data(serial, data);
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index a62981ca7a73..f93b81a297d6 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -841,7 +841,10 @@ static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch)
u8 newMSR = (u8) *ch;
unsigned long flags;
+ /* May be called from qt2_process_read_urb() for an unbound port. */
port_priv = usb_get_serial_port_data(port);
+ if (!port_priv)
+ return;
spin_lock_irqsave(&port_priv->lock, flags);
port_priv->shadowMSR = newMSR;
@@ -869,7 +872,10 @@ static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch)
unsigned long flags;
u8 newLSR = (u8) *ch;
+ /* May be called from qt2_process_read_urb() for an unbound port. */
port_priv = usb_get_serial_port_data(port);
+ if (!port_priv)
+ return;
if (newLSR & UART_LSR_BI)
newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI);
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index edbbb13d6de6..bd23a7cb1be2 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -86,6 +86,8 @@ DEVICE(moto_modem, MOTO_IDS);
#define MOTOROLA_TETRA_IDS() \
{ USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ \
{ USB_DEVICE(0x0cad, 0x9012) }, /* MTP6550 */ \
+ { USB_DEVICE(0x0cad, 0x9013) }, /* MTP3xxx */ \
+ { USB_DEVICE(0x0cad, 0x9015) }, /* MTP85xx */ \
{ USB_DEVICE(0x0cad, 0x9016) } /* TPG2200 */
DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 8f066bb55d7d..dc7a65b9ec98 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1317,6 +1317,9 @@ static int usb_serial_register(struct usb_serial_driver *driver)
return -EINVAL;
}
+ /* Prevent individual ports from being unbound. */
+ driver->driver.suppress_bind_attrs = true;
+
usb_serial_operations_init(driver);
/* Add this device to our list of devices */
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
index 1c120eaf4091..934e9361cf6b 100644
--- a/drivers/usb/serial/usb-wwan.h
+++ b/drivers/usb/serial/usb-wwan.h
@@ -38,6 +38,7 @@ struct usb_wwan_intf_private {
spinlock_t susp_lock;
unsigned int suspended:1;
unsigned int use_send_setup:1;
+ unsigned int use_zlp:1;
int in_flight;
unsigned int open_ports;
void *private;
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 7e855c87e4f7..13be21aad2f4 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -461,6 +461,7 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
void (*callback) (struct urb *))
{
struct usb_serial *serial = port->serial;
+ struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
struct urb *urb;
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
@@ -471,6 +472,9 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
usb_sndbulkpipe(serial->dev, endpoint) | dir,
buf, len, callback, ctx);
+ if (intfdata->use_zlp && dir == USB_DIR_OUT)
+ urb->transfer_flags |= URB_ZERO_PACKET;
+
return urb;
}
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.