aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/Kconfig16
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/ch341.c2
-rw-r--r--drivers/usb/serial/console.c6
-rw-r--r--drivers/usb/serial/cp210x.c307
-rw-r--r--drivers/usb/serial/cyberjack.c3
-rw-r--r--drivers/usb/serial/cypress_m8.c3
-rw-r--r--drivers/usb/serial/digi_acceleport.c8
-rw-r--r--drivers/usb/serial/ftdi_sio.c10
-rw-r--r--drivers/usb/serial/ftdi_sio.h8
-rw-r--r--drivers/usb/serial/garmin_gps.c51
-rw-r--r--drivers/usb/serial/io_edgeport.c4
-rw-r--r--drivers/usb/serial/iuu_phoenix.c4
-rw-r--r--drivers/usb/serial/keyspan.c2
-rw-r--r--drivers/usb/serial/kl5kusb105.c3
-rw-r--r--drivers/usb/serial/mct_u232.c2
-rw-r--r--drivers/usb/serial/mos7720.c4
-rw-r--r--drivers/usb/serial/mos7840.c8
-rw-r--r--drivers/usb/serial/mxu11x0.c1006
-rw-r--r--drivers/usb/serial/option.c5
-rw-r--r--drivers/usb/serial/qcserial.c7
-rw-r--r--drivers/usb/serial/quatech2.c2
-rw-r--r--drivers/usb/serial/safe_serial.c11
23 files changed, 252 insertions, 1221 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index f612dda9c977..56ecb8b5115d 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -475,22 +475,6 @@ config USB_SERIAL_MOS7840
To compile this driver as a module, choose M here: the
module will be called mos7840. If unsure, choose N.
-config USB_SERIAL_MXUPORT11
- tristate "USB Moxa UPORT 11x0 Serial Driver"
- ---help---
- Say Y here if you want to use a MOXA UPort 11x0 Serial hub.
-
- This driver supports:
-
- - UPort 1110 : 1 port RS-232 USB to Serial Hub.
- - UPort 1130 : 1 port RS-422/485 USB to Serial Hub.
- - UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation.
- - UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub.
- - UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation.
-
- To compile this driver as a module, choose M here: the
- module will be called mxu11x0.
-
config USB_SERIAL_MXUPORT
tristate "USB Moxa UPORT Serial Driver"
---help---
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index f3fa5e53702d..349d9df0895f 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_USB_SERIAL_METRO) += metro-usb.o
obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o
obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o
obj-$(CONFIG_USB_SERIAL_MXUPORT) += mxuport.o
-obj-$(CONFIG_USB_SERIAL_MXUPORT11) += mxu11x0.o
obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index c73808f095bb..f139488d0816 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -370,7 +370,7 @@ static void ch341_set_termios(struct tty_struct *tty,
static void ch341_break_ctl(struct tty_struct *tty, int break_state)
{
const uint16_t ch341_break_reg =
- CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
+ ((uint16_t) CH341_REG_BREAK2 << 8) | CH341_REG_BREAK1;
struct usb_serial_port *port = tty->driver_data;
int r;
uint16_t reg_contents;
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 3806e7014199..a66b01bb1fa1 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -147,10 +147,7 @@ static int usb_console_setup(struct console *co, char *options)
kref_get(&tty->driver->kref);
__module_get(tty->driver->owner);
tty->ops = &usb_console_fake_tty_ops;
- if (tty_init_termios(tty)) {
- retval = -ENOMEM;
- goto put_tty;
- }
+ tty_init_termios(tty);
tty_port_tty_set(&port->port, tty);
}
@@ -185,7 +182,6 @@ static int usb_console_setup(struct console *co, char *options)
fail:
tty_port_tty_set(&port->port, NULL);
- put_tty:
tty_kref_put(tty);
reset_open_count:
port->port.count = 0;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 7c319e7edda2..fbfe761c7fba 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -165,6 +165,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
+ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
{ USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
@@ -326,113 +327,169 @@ struct cp210x_comm_status {
#define PURGE_ALL 0x000f
/*
- * cp210x_get_config
- * Reads from the CP210x configuration registers
- * 'size' is specified in bytes.
- * 'data' is a pointer to a pre-allocated array of integers large
- * enough to hold 'size' bytes (with 4 bytes to each integer)
+ * Reads a variable-sized block of CP210X_ registers, identified by req.
+ * Returns data into buf in native USB byte order.
*/
-static int cp210x_get_config(struct usb_serial_port *port, u8 request,
- unsigned int *data, int size)
+static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
+ void *buf, int bufsize)
{
struct usb_serial *serial = port->serial;
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
- __le32 *buf;
- int result, i, length;
-
- /* Number of integers required to contain the array */
- length = (((size - 1) | 3) + 1) / 4;
+ void *dmabuf;
+ int result;
- buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
- if (!buf)
+ dmabuf = kmalloc(bufsize, GFP_KERNEL);
+ if (!dmabuf) {
+ /*
+ * FIXME Some callers don't bother to check for error,
+ * at least give them consistent junk until they are fixed
+ */
+ memset(buf, 0, bufsize);
return -ENOMEM;
+ }
- /* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
- port_priv->bInterfaceNumber, buf, size,
- USB_CTRL_GET_TIMEOUT);
+ req, REQTYPE_INTERFACE_TO_HOST, 0,
+ port_priv->bInterfaceNumber, dmabuf, bufsize,
+ USB_CTRL_SET_TIMEOUT);
+ if (result == bufsize) {
+ memcpy(buf, dmabuf, bufsize);
+ result = 0;
+ } else {
+ dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
+ req, bufsize, result);
+ if (result >= 0)
+ result = -EPROTO;
- /* Convert data into an array of integers */
- for (i = 0; i < length; i++)
- data[i] = le32_to_cpu(buf[i]);
+ /*
+ * FIXME Some callers don't bother to check for error,
+ * at least give them consistent junk until they are fixed
+ */
+ memset(buf, 0, bufsize);
+ }
- kfree(buf);
+ kfree(dmabuf);
- if (result != size) {
- dev_dbg(&port->dev, "%s - Unable to send config request, request=0x%x size=%d result=%d\n",
- __func__, request, size, result);
- if (result > 0)
- result = -EPROTO;
+ return result;
+}
- return result;
+/*
+ * Reads any 32-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val)
+{
+ __le32 le32_val;
+ int err;
+
+ err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val));
+ if (err) {
+ /*
+ * FIXME Some callers don't bother to check for error,
+ * at least give them consistent junk until they are fixed
+ */
+ *val = 0;
+ return err;
}
+ *val = le32_to_cpu(le32_val);
+
+ return 0;
+}
+
+/*
+ * Reads any 16-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val)
+{
+ __le16 le16_val;
+ int err;
+
+ err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val));
+ if (err)
+ return err;
+
+ *val = le16_to_cpu(le16_val);
+
return 0;
}
/*
- * cp210x_set_config
- * Writes to the CP210x configuration registers
- * Values less than 16 bits wide are sent directly
- * 'size' is specified in bytes.
+ * Reads any 8-bit CP210X_ register identified by req.
+ */
+static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
+{
+ return cp210x_read_reg_block(port, req, val, sizeof(*val));
+}
+
+/*
+ * Writes any 16-bit CP210X_ register (req) whose value is passed
+ * entirely in the wValue field of the USB request.
*/
-static int cp210x_set_config(struct usb_serial_port *port, u8 request,
- unsigned int *data, int size)
+static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val)
{
struct usb_serial *serial = port->serial;
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
- __le32 *buf;
- int result, i, length;
+ int result;
+
+ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ req, REQTYPE_HOST_TO_INTERFACE, val,
+ port_priv->bInterfaceNumber, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (result < 0) {
+ dev_err(&port->dev, "failed set request 0x%x status: %d\n",
+ req, result);
+ }
+
+ return result;
+}
- /* Number of integers required to contain the array */
- length = (((size - 1) | 3) + 1) / 4;
+/*
+ * Writes a variable-sized block of CP210X_ registers, identified by req.
+ * Data in buf must be in native USB byte order.
+ */
+static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
+ void *buf, int bufsize)
+{
+ struct usb_serial *serial = port->serial;
+ struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+ void *dmabuf;
+ int result;
- buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
- if (!buf)
+ dmabuf = kmalloc(bufsize, GFP_KERNEL);
+ if (!dmabuf)
return -ENOMEM;
- /* Array of integers into bytes */
- for (i = 0; i < length; i++)
- buf[i] = cpu_to_le32(data[i]);
+ memcpy(dmabuf, buf, bufsize);
- if (size > 2) {
- result = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
- port_priv->bInterfaceNumber, buf, size,
- USB_CTRL_SET_TIMEOUT);
- } else {
- result = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- request, REQTYPE_HOST_TO_INTERFACE, data[0],
- port_priv->bInterfaceNumber, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- }
+ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ req, REQTYPE_HOST_TO_INTERFACE, 0,
+ port_priv->bInterfaceNumber, dmabuf, bufsize,
+ USB_CTRL_SET_TIMEOUT);
- kfree(buf);
+ kfree(dmabuf);
- if ((size > 2 && result != size) || result < 0) {
- dev_dbg(&port->dev, "%s - Unable to send request, request=0x%x size=%d result=%d\n",
- __func__, request, size, result);
- if (result > 0)
+ if (result == bufsize) {
+ result = 0;
+ } else {
+ dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
+ req, bufsize, result);
+ if (result >= 0)
result = -EPROTO;
-
- return result;
}
- return 0;
+ return result;
}
/*
- * cp210x_set_config_single
- * Convenience function for calling cp210x_set_config on single data values
- * without requiring an integer pointer
+ * Writes any 32-bit CP210X_ register identified by req.
*/
-static inline int cp210x_set_config_single(struct usb_serial_port *port,
- u8 request, unsigned int data)
+static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
{
- return cp210x_set_config(port, request, &data, 2);
+ __le32 le32_val;
+
+ le32_val = cpu_to_le32(val);
+
+ return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
}
/*
@@ -444,47 +501,46 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
{
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
- unsigned int line_ctl_save;
- unsigned int line_ctl_test;
+ u16 line_ctl_save;
+ u16 line_ctl_test;
int err;
- err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_save, 2);
+ err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save);
if (err)
return err;
- line_ctl_test = 0x800;
- err = cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_test, 2);
+ err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800);
if (err)
return err;
- err = cp210x_get_config(port, CP210X_GET_LINE_CTL, &line_ctl_test, 2);
+ err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test);
if (err)
return err;
if (line_ctl_test == 8) {
port_priv->has_swapped_line_ctl = true;
- line_ctl_save = swab16((u16)line_ctl_save);
+ line_ctl_save = swab16(line_ctl_save);
}
- return cp210x_set_config(port, CP210X_SET_LINE_CTL, &line_ctl_save, 2);
+ return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save);
}
/*
- * Must always be called instead of cp210x_get_config(CP210X_GET_LINE_CTL)
+ * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL)
* to workaround cp2108 bug and get correct value.
*/
-static int cp210x_get_line_ctl(struct usb_serial_port *port, unsigned int *ctl)
+static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl)
{
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
int err;
- err = cp210x_get_config(port, CP210X_GET_LINE_CTL, ctl, 2);
+ err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl);
if (err)
return err;
/* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
if (port_priv->has_swapped_line_ctl)
- *ctl = swab16((u16)(*ctl));
+ *ctl = swab16(*ctl);
return 0;
}
@@ -535,8 +591,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result;
- result = cp210x_set_config_single(port, CP210X_IFC_ENABLE,
- UART_ENABLE);
+ result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
if (result) {
dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
return result;
@@ -554,15 +609,12 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
static void cp210x_close(struct usb_serial_port *port)
{
- unsigned int purge_ctl;
-
usb_serial_generic_close(port);
/* Clear both queues; cp2108 needs this to avoid an occasional hang */
- purge_ctl = PURGE_ALL;
- cp210x_set_config(port, CP210X_PURGE, &purge_ctl, 2);
+ cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
- cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
+ cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
}
/*
@@ -640,11 +692,12 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
unsigned int *cflagp, unsigned int *baudp)
{
struct device *dev = &port->dev;
- unsigned int cflag, modem_ctl[4];
- unsigned int baud;
- unsigned int bits;
+ unsigned int cflag;
+ u8 modem_ctl[16];
+ u32 baud;
+ u16 bits;
- cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
+ cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
*baudp = baud;
@@ -675,14 +728,14 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
default:
dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
}
@@ -713,7 +766,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
}
@@ -725,7 +778,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
case BITS_STOP_1_5:
dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
bits &= ~BITS_STOP_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
case BITS_STOP_2:
dev_dbg(dev, "%s - stop bits = 2\n", __func__);
@@ -734,12 +787,13 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
default:
dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
bits &= ~BITS_STOP_MASK;
- cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
break;
}
- cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
- if (modem_ctl[0] & 0x0008) {
+ cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl,
+ sizeof(modem_ctl));
+ if (modem_ctl[0] & 0x08) {
dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
cflag |= CRTSCTS;
} else {
@@ -791,8 +845,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
baud = cp210x_quantise_baudrate(baud);
dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
- if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
- sizeof(baud))) {
+ if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
if (old_termios)
baud = old_termios->c_ospeed;
@@ -808,8 +861,8 @@ static void cp210x_set_termios(struct tty_struct *tty,
{
struct device *dev = &port->dev;
unsigned int cflag, old_cflag;
- unsigned int bits;
- unsigned int modem_ctl[4];
+ u16 bits;
+ u8 modem_ctl[16];
cflag = tty->termios.c_cflag;
old_cflag = old_termios->c_cflag;
@@ -847,7 +900,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
bits |= BITS_DATA_8;
break;
}
- if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
dev_dbg(dev, "Number of data bits requested not supported by device\n");
}
@@ -874,7 +927,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
}
}
}
- if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
dev_dbg(dev, "Parity mode not supported by device\n");
}
@@ -888,32 +941,40 @@ static void cp210x_set_termios(struct tty_struct *tty,
bits |= BITS_STOP_1;
dev_dbg(dev, "%s - stop bits = 1\n", __func__);
}
- if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
+ if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
dev_dbg(dev, "Number of stop bits requested not supported by device\n");
}
if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
- cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
- dev_dbg(dev, "%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",
- __func__, modem_ctl[0], modem_ctl[1],
- modem_ctl[2], modem_ctl[3]);
+
+ /* Only bytes 0, 4 and 7 out of first 8 have functional bits */
+
+ cp210x_read_reg_block(port, CP210X_GET_FLOW, modem_ctl,
+ sizeof(modem_ctl));
+ dev_dbg(dev, "%s - read modem controls = %02x .. .. .. %02x .. .. %02x\n",
+ __func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]);
if (cflag & CRTSCTS) {
modem_ctl[0] &= ~0x7B;
modem_ctl[0] |= 0x09;
- modem_ctl[1] = 0x80;
+ modem_ctl[4] = 0x80;
+ /* FIXME - why clear reserved bits just read? */
+ modem_ctl[5] = 0;
+ modem_ctl[6] = 0;
+ modem_ctl[7] = 0;
dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
} else {
modem_ctl[0] &= ~0x7B;
modem_ctl[0] |= 0x01;
- modem_ctl[1] |= 0x40;
+ /* FIXME - OR here instead of assignment looks wrong */
+ modem_ctl[4] |= 0x40;
dev_dbg(dev, "%s - flow control = NONE\n", __func__);
}
- dev_dbg(dev, "%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n",
- __func__, modem_ctl[0], modem_ctl[1],
- modem_ctl[2], modem_ctl[3]);
- cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
+ dev_dbg(dev, "%s - write modem controls = %02x .. .. .. %02x .. .. %02x\n",
+ __func__, modem_ctl[0], modem_ctl[4], modem_ctl[7]);
+ cp210x_write_reg_block(port, CP210X_SET_FLOW, modem_ctl,
+ sizeof(modem_ctl));
}
}
@@ -928,7 +989,7 @@ static int cp210x_tiocmset(struct tty_struct *tty,
static int cp210x_tiocmset_port(struct usb_serial_port *port,
unsigned int set, unsigned int clear)
{
- unsigned int control = 0;
+ u16 control = 0;
if (set & TIOCM_RTS) {
control |= CONTROL_RTS;
@@ -949,7 +1010,7 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
- return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
+ return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
}
static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
@@ -963,10 +1024,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
static int cp210x_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- unsigned int control;
+ u8 control;
int result;
- cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
+ cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
@@ -983,7 +1044,7 @@ static int cp210x_tiocmget(struct tty_struct *tty)
static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
- unsigned int state;
+ u16 state;
if (break_state == 0)
state = BREAK_OFF;
@@ -991,7 +1052,7 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
state = BREAK_ON;
dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
state == BREAK_OFF ? "off" : "on");
- cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
+ cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
}
static int cp210x_port_probe(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 2916dea3ede8..5f17a3b9916d 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -140,7 +140,6 @@ static int cyberjack_open(struct tty_struct *tty,
{
struct cyberjack_private *priv;
unsigned long flags;
- int result = 0;
dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__);
usb_clear_halt(port->serial->dev, port->write_urb->pipe);
@@ -152,7 +151,7 @@ static int cyberjack_open(struct tty_struct *tty,
priv->wrsent = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- return result;
+ return 0;
}
static void cyberjack_close(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf53392819..b283eb8b86d6 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1165,8 +1165,7 @@ static void cypress_read_int_callback(struct urb *urb)
/* hangup, as defined in acm.c... this might be a bad place for it
* though */
- if (tty && !(tty->termios.c_cflag & CLOCAL) &&
- !(priv->current_status & UART_CD)) {
+ if (tty && !C_CLOCAL(tty) && !(priv->current_status & UART_CD)) {
dev_dbg(dev, "%s - calling hangup\n", __func__);
tty_hangup(tty);
goto continue_read;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 12b0e67473ba..010a42a92688 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -695,11 +695,11 @@ static void digi_set_termios(struct tty_struct *tty,
arg = -1;
/* reassert DTR and (maybe) RTS on transition from B0 */
- if ((old_cflag&CBAUD) == B0) {
+ if ((old_cflag & CBAUD) == B0) {
/* don't set RTS if using hardware flow control */
/* and throttling input */
modem_signals = TIOCM_DTR;
- if (!(tty->termios.c_cflag & CRTSCTS) ||
+ if (!C_CRTSCTS(tty) ||
!test_bit(TTY_THROTTLED, &tty->flags))
modem_signals |= TIOCM_RTS;
digi_set_modem_signals(port, modem_signals, 1);
@@ -1491,8 +1491,8 @@ static int digi_read_oob_callback(struct urb *urb)
rts = 0;
if (tty)
- rts = tty->termios.c_cflag & CRTSCTS;
-
+ rts = C_CRTSCTS(tty);
+
if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
spin_lock(&priv->dp_port_lock);
/* convert from digi flags to termiox flags */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8c660ae401d8..427ae43ee898 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1320,11 +1320,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
if (baud <= 3000000) {
__u16 product_id = le16_to_cpu(
port->serial->dev->descriptor.idProduct);
- if (((FTDI_NDI_HUC_PID == product_id) ||
- (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
- (FTDI_NDI_FUTURE_2_PID == product_id) ||
- (FTDI_NDI_FUTURE_3_PID == product_id) ||
- (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+ if (((product_id == FTDI_NDI_HUC_PID) ||
+ (product_id == FTDI_NDI_SPECTRA_SCU_PID) ||
+ (product_id == FTDI_NDI_FUTURE_2_PID) ||
+ (product_id == FTDI_NDI_FUTURE_3_PID) ||
+ (product_id == FTDI_NDI_AURORA_SCU_PID)) &&
(baud == 19200)) {
baud = 1200000;
}
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index ed58c6fa8dbe..bbcc13df11ac 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -239,11 +239,11 @@ enum ftdi_sio_baudrate {
*/
#define FTDI_SIO_SET_DTR_MASK 0x1
-#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8))
-#define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8))
+#define FTDI_SIO_SET_DTR_HIGH ((FTDI_SIO_SET_DTR_MASK << 8) | 1)
+#define FTDI_SIO_SET_DTR_LOW ((FTDI_SIO_SET_DTR_MASK << 8) | 0)
#define FTDI_SIO_SET_RTS_MASK 0x2
-#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8))
-#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8))
+#define FTDI_SIO_SET_RTS_HIGH ((FTDI_SIO_SET_RTS_MASK << 8) | 2)
+#define FTDI_SIO_SET_RTS_LOW ((FTDI_SIO_SET_RTS_MASK << 8) | 0)
/*
* ControlValue
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index db591d19d416..97cabf803c2f 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -237,10 +237,10 @@ static inline int getDataLength(const __u8 *usbPacket)
*/
static inline int isAbortTrfCmnd(const unsigned char *buf)
{
- if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
- sizeof(GARMIN_STOP_TRANSFER_REQ)) ||
- 0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
- sizeof(GARMIN_STOP_TRANSFER_REQ_V2)))
+ if (memcmp(buf, GARMIN_STOP_TRANSFER_REQ,
+ sizeof(GARMIN_STOP_TRANSFER_REQ)) == 0 ||
+ memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2,
+ sizeof(GARMIN_STOP_TRANSFER_REQ_V2)) == 0)
return 1;
else
return 0;
@@ -350,7 +350,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
unsigned l = 0;
dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__,
- 0xFF & pkt_id);
+ pkt_id);
*ptr++ = DLE;
*ptr++ = ACK;
@@ -366,7 +366,7 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
*ptr++ = DLE;
*ptr++ = 0;
- *ptr++ = 0xFF & (-cksum);
+ *ptr++ = (-cksum) & 0xFF;
*ptr++ = DLE;
*ptr++ = ETX;
@@ -423,9 +423,9 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
n++;
}
- if ((0xff & (cksum + *recpkt)) != 0) {
+ if (((cksum + *recpkt) & 0xff) != 0) {
dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n",
- __func__, 0xff & -cksum, 0xff & *recpkt);
+ __func__, -cksum & 0xff, *recpkt);
return -EINVPKT;
}
@@ -528,7 +528,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
dev_dbg(dev, "NAK packet complete.\n");
} else {
dev_dbg(dev, "packet complete - id=0x%X.\n",
- 0xFF & data);
+ data);
gsp_rec_packet(garmin_data_p, size);
}
@@ -636,7 +636,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
garmin_data_p->outsize = 0;
- if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) {
+ if (getLayerId(garmin_data_p->outbuffer) != GARMIN_LAYERID_APPL) {
dev_dbg(dev, "not an application packet (%d)\n",
getLayerId(garmin_data_p->outbuffer));
return -1;
@@ -688,7 +688,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
*dst++ = DLE;
}
- cksum = 0xFF & -cksum;
+ cksum = -cksum & 0xFF;
*dst++ = cksum;
if (cksum == DLE)
*dst++ = DLE;
@@ -860,7 +860,6 @@ static int process_resetdev_request(struct usb_serial_port *port)
static int garmin_clear(struct garmin_data *garmin_data_p)
{
unsigned long flags;
- int status = 0;
/* flush all queued data */
pkt_clear(garmin_data_p);
@@ -870,7 +869,7 @@ static int garmin_clear(struct garmin_data *garmin_data_p)
garmin_data_p->outsize = 0;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
- return status;
+ return 0;
}
@@ -970,7 +969,7 @@ static void garmin_write_bulk_callback(struct urb *urb)
struct garmin_data *garmin_data_p =
usb_get_serial_port_data(port);
- if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) {
+ if (getLayerId(urb->transfer_buffer) == GARMIN_LAYERID_APPL) {
if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
gsp_send_ack(garmin_data_p,
@@ -1025,7 +1024,7 @@ static int garmin_write_bulk(struct usb_serial_port *port,
dismiss_ack ? NULL : port);
urb->transfer_flags |= URB_ZERO_PACKET;
- if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
+ if (getLayerId(buffer) == GARMIN_LAYERID_APPL) {
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= APP_REQ_SEEN;
@@ -1077,9 +1076,9 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
pktsiz = getDataLength(garmin_data_p->privpkt);
pktid = getPacketId(garmin_data_p->privpkt);
- if (count == (GARMIN_PKTHDR_LENGTH+pktsiz)
- && GARMIN_LAYERID_PRIVATE ==
- getLayerId(garmin_data_p->privpkt)) {
+ if (count == (GARMIN_PKTHDR_LENGTH + pktsiz) &&
+ getLayerId(garmin_data_p->privpkt) ==
+ GARMIN_LAYERID_PRIVATE) {
dev_dbg(dev, "%s - processing private request %d\n",
__func__, pktid);
@@ -1192,7 +1191,7 @@ static void garmin_read_bulk_callback(struct urb *urb)
garmin_read_process(garmin_data_p, data, urb->actual_length, 1);
if (urb->actual_length == 0 &&
- 0 != (garmin_data_p->flags & FLAGS_BULK_IN_RESTART)) {
+ (garmin_data_p->flags & FLAGS_BULK_IN_RESTART) != 0) {
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
@@ -1203,7 +1202,7 @@ static void garmin_read_bulk_callback(struct urb *urb)
__func__, retval);
} else if (urb->actual_length > 0) {
/* Continue trying to read until nothing more is received */
- if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) {
+ if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) {
retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (retval)
dev_err(&port->dev,
@@ -1249,12 +1248,12 @@ static void garmin_read_int_callback(struct urb *urb)
urb->transfer_buffer);
if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) &&
- 0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
- sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) {
+ memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
+ sizeof(GARMIN_BULK_IN_AVAIL_REPLY)) == 0) {
dev_dbg(&port->dev, "%s - bulk data available.\n", __func__);
- if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+ if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) == 0) {
/* bulk data available */
retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
@@ -1276,8 +1275,8 @@ static void garmin_read_int_callback(struct urb *urb)
}
} else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY))
- && 0 == memcmp(data, GARMIN_START_SESSION_REPLY,
- sizeof(GARMIN_START_SESSION_REPLY))) {
+ && memcmp(data, GARMIN_START_SESSION_REPLY,
+ sizeof(GARMIN_START_SESSION_REPLY)) == 0) {
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN;
@@ -1356,7 +1355,7 @@ static void garmin_unthrottle(struct tty_struct *tty)
if (garmin_data_p->mode == MODE_NATIVE)
garmin_flush_queue(garmin_data_p);
- if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
+ if ((garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE) != 0) {
status = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (status)
dev_err(&port->dev,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index f49327d20ee8..f3007ecdd1b4 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1398,7 +1398,7 @@ static void edge_throttle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
edge_port->shadowMCR &= ~MCR_RTS;
status = send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
@@ -1435,7 +1435,7 @@ static void edge_unthrottle(struct tty_struct *tty)
return;
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
edge_port->shadowMCR |= MCR_RTS;
send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 5ad4a0fb4b26..344b4eea4bd5 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -360,7 +360,7 @@ static void iuu_led_activity_on(struct urb *urb)
int result;
char *buf_ptr = port->write_urb->transfer_buffer;
*buf_ptr++ = IUU_SET_LED;
- if (xmas == 1) {
+ if (xmas) {
get_random_bytes(buf_ptr, 6);
*(buf_ptr+7) = 1;
} else {
@@ -380,7 +380,7 @@ static void iuu_led_activity_off(struct urb *urb)
struct usb_serial_port *port = urb->context;
int result;
char *buf_ptr = port->write_urb->transfer_buffer;
- if (xmas == 1) {
+ if (xmas) {
iuu_rxcmd(urb);
return;
} else {
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index e07b15ed5814..b6bd8e4a6486 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1963,7 +1963,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
if (d_details->product_id == keyspan_usa49wg_product_id) {
dr = (void *)(s_priv->ctrl_buf);
dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT;
- dr->bRequest = 0xB0; /* 49wg control message */;
+ dr->bRequest = 0xB0; /* 49wg control message */
dr->wValue = 0;
dr->wIndex = 0;
dr->wLength = cpu_to_le16(sizeof(msg));
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index e020ad28a00c..fc5d3a791e08 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -472,7 +472,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
/* maybe this should be simulated by sending read
* disable and read enable messages?
*/
- ;
#if 0
priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
mct_u232_set_modem_ctrl(serial, priv->control_state);
@@ -527,7 +526,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
mct_u232_set_line_ctrl(serial, priv->last_lcr);
#endif
- ;
}
/*
* Set flow control: well, I do not really now how to handle DTR/RTS.
@@ -546,7 +544,6 @@ static void klsi_105_set_termios(struct tty_struct *tty,
priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
mct_u232_set_modem_ctrl(serial, priv->control_state);
#endif
- ;
}
memcpy(cfg, &priv->cfg, sizeof(*cfg));
spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index fd707d6a10e2..4446b8d70ac2 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -428,7 +428,7 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
* either.
*/
spin_lock_irqsave(&priv->lock, flags);
- if (tty && (tty->termios.c_cflag & CBAUD))
+ if (tty && C_BAUD(tty))
priv->control_state = TIOCM_DTR | TIOCM_RTS;
else
priv->control_state = 0;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 78b4f64c6b00..2eddbe538cda 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1308,7 +1308,7 @@ static void mos7720_throttle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
mos7720_port->shadowMCR &= ~UART_MCR_RTS;
write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
mos7720_port->shadowMCR);
@@ -1338,7 +1338,7 @@ static void mos7720_unthrottle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
mos7720_port->shadowMCR |= UART_MCR_RTS;
write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
mos7720_port->shadowMCR);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2c69bfcdacc6..ed378fb232e7 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1425,7 +1425,7 @@ static void mos7840_throttle(struct tty_struct *tty)
return;
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
mos7840_port->shadowMCR &= ~MCR_RTS;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
mos7840_port->shadowMCR);
@@ -1466,7 +1466,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
mos7840_port->shadowMCR |= MCR_RTS;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
mos7840_port->shadowMCR);
@@ -1842,7 +1842,7 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
Data = 0x0c;
mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
- if (mos7840_port->read_urb_busy == false) {
+ if (!mos7840_port->read_urb_busy) {
mos7840_port->read_urb_busy = true;
status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
if (status) {
@@ -1906,7 +1906,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
return;
}
- if (mos7840_port->read_urb_busy == false) {
+ if (!mos7840_port->read_urb_busy) {
mos7840_port->read_urb_busy = true;
status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
if (status) {
diff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c
deleted file mode 100644
index 619607323bfd..000000000000
--- a/drivers/usb/serial/mxu11x0.c
+++ /dev/null
@@ -1,1006 +0,0 @@
-/*
- * USB Moxa UPORT 11x0 Serial Driver
- *
- * Copyright (C) 2007 MOXA Technologies Co., Ltd.
- * Copyright (C) 2015 Mathieu Othacehe <m.othacehe@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- *
- * Supports the following Moxa USB to serial converters:
- * UPort 1110, 1 port RS-232 USB to Serial Hub.
- * UPort 1130, 1 port RS-422/485 USB to Serial Hub.
- * UPort 1130I, 1 port RS-422/485 USB to Serial Hub with isolation
- * protection.
- * UPort 1150, 1 port RS-232/422/485 USB to Serial Hub.
- * UPort 1150I, 1 port RS-232/422/485 USB to Serial Hub with isolation
- * protection.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/firmware.h>
-#include <linux/jiffies.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-/* Vendor and product ids */
-#define MXU1_VENDOR_ID 0x110a
-#define MXU1_1110_PRODUCT_ID 0x1110
-#define MXU1_1130_PRODUCT_ID 0x1130
-#define MXU1_1150_PRODUCT_ID 0x1150
-#define MXU1_1151_PRODUCT_ID 0x1151
-#define MXU1_1131_PRODUCT_ID 0x1131
-
-/* Commands */
-#define MXU1_GET_VERSION 0x01
-#define MXU1_GET_PORT_STATUS 0x02
-#define MXU1_GET_PORT_DEV_INFO 0x03
-#define MXU1_GET_CONFIG 0x04
-#define MXU1_SET_CONFIG 0x05
-#define MXU1_OPEN_PORT 0x06
-#define MXU1_CLOSE_PORT 0x07
-#define MXU1_START_PORT 0x08
-#define MXU1_STOP_PORT 0x09
-#define MXU1_TEST_PORT 0x0A
-#define MXU1_PURGE_PORT 0x0B
-#define MXU1_RESET_EXT_DEVICE 0x0C
-#define MXU1_GET_OUTQUEUE 0x0D
-#define MXU1_WRITE_DATA 0x80
-#define MXU1_READ_DATA 0x81
-#define MXU1_REQ_TYPE_CLASS 0x82
-
-/* Module identifiers */
-#define MXU1_I2C_PORT 0x01
-#define MXU1_IEEE1284_PORT 0x02
-#define MXU1_UART1_PORT 0x03
-#define MXU1_UART2_PORT 0x04
-#define MXU1_RAM_PORT 0x05
-
-/* Modem status */
-#define MXU1_MSR_DELTA_CTS 0x01
-#define MXU1_MSR_DELTA_DSR 0x02
-#define MXU1_MSR_DELTA_RI 0x04
-#define MXU1_MSR_DELTA_CD 0x08
-#define MXU1_MSR_CTS 0x10
-#define MXU1_MSR_DSR 0x20
-#define MXU1_MSR_RI 0x40
-#define MXU1_MSR_CD 0x80
-#define MXU1_MSR_DELTA_MASK 0x0F
-#define MXU1_MSR_MASK 0xF0
-
-/* Line status */
-#define MXU1_LSR_OVERRUN_ERROR 0x01
-#define MXU1_LSR_PARITY_ERROR 0x02
-#define MXU1_LSR_FRAMING_ERROR 0x04
-#define MXU1_LSR_BREAK 0x08
-#define MXU1_LSR_ERROR 0x0F
-#define MXU1_LSR_RX_FULL 0x10
-#define MXU1_LSR_TX_EMPTY 0x20
-
-/* Modem control */
-#define MXU1_MCR_LOOP 0x04
-#define MXU1_MCR_DTR 0x10
-#define MXU1_MCR_RTS 0x20
-
-/* Mask settings */
-#define MXU1_UART_ENABLE_RTS_IN 0x0001
-#define MXU1_UART_DISABLE_RTS 0x0002
-#define MXU1_UART_ENABLE_PARITY_CHECKING 0x0008
-#define MXU1_UART_ENABLE_DSR_OUT 0x0010
-#define MXU1_UART_ENABLE_CTS_OUT 0x0020
-#define MXU1_UART_ENABLE_X_OUT 0x0040
-#define MXU1_UART_ENABLE_XA_OUT 0x0080
-#define MXU1_UART_ENABLE_X_IN 0x0100
-#define MXU1_UART_ENABLE_DTR_IN 0x0800
-#define MXU1_UART_DISABLE_DTR 0x1000
-#define MXU1_UART_ENABLE_MS_INTS 0x2000
-#define MXU1_UART_ENABLE_AUTO_START_DMA 0x4000
-#define MXU1_UART_SEND_BREAK_SIGNAL 0x8000
-
-/* Parity */
-#define MXU1_UART_NO_PARITY 0x00
-#define MXU1_UART_ODD_PARITY 0x01
-#define MXU1_UART_EVEN_PARITY 0x02
-#define MXU1_UART_MARK_PARITY 0x03
-#define MXU1_UART_SPACE_PARITY 0x04
-
-/* Stop bits */
-#define MXU1_UART_1_STOP_BITS 0x00
-#define MXU1_UART_1_5_STOP_BITS 0x01
-#define MXU1_UART_2_STOP_BITS 0x02
-
-/* Bits per character */
-#define MXU1_UART_5_DATA_BITS 0x00
-#define MXU1_UART_6_DATA_BITS 0x01
-#define MXU1_UART_7_DATA_BITS 0x02
-#define MXU1_UART_8_DATA_BITS 0x03
-
-/* Operation modes */
-#define MXU1_UART_232 0x00
-#define MXU1_UART_485_RECEIVER_DISABLED 0x01
-#define MXU1_UART_485_RECEIVER_ENABLED 0x02
-
-/* Pipe transfer mode and timeout */
-#define MXU1_PIPE_MODE_CONTINUOUS 0x01
-#define MXU1_PIPE_MODE_MASK 0x03
-#define MXU1_PIPE_TIMEOUT_MASK 0x7C
-#define MXU1_PIPE_TIMEOUT_ENABLE 0x80
-
-/* Config struct */
-struct mxu1_uart_config {
- __be16 wBaudRate;
- __be16 wFlags;
- u8 bDataBits;
- u8 bParity;
- u8 bStopBits;
- char cXon;
- char cXoff;
- u8 bUartMode;
-} __packed;
-
-/* Purge modes */
-#define MXU1_PURGE_OUTPUT 0x00
-#define MXU1_PURGE_INPUT 0x80
-
-/* Read/Write data */
-#define MXU1_RW_DATA_ADDR_SFR 0x10
-#define MXU1_RW_DATA_ADDR_IDATA 0x20
-#define MXU1_RW_DATA_ADDR_XDATA 0x30
-#define MXU1_RW_DATA_ADDR_CODE 0x40
-#define MXU1_RW_DATA_ADDR_GPIO 0x50
-#define MXU1_RW_DATA_ADDR_I2C 0x60
-#define MXU1_RW_DATA_ADDR_FLASH 0x70
-#define MXU1_RW_DATA_ADDR_DSP 0x80
-
-#define MXU1_RW_DATA_UNSPECIFIED 0x00
-#define MXU1_RW_DATA_BYTE 0x01
-#define MXU1_RW_DATA_WORD 0x02
-#define MXU1_RW_DATA_DOUBLE_WORD 0x04
-
-struct mxu1_write_data_bytes {
- u8 bAddrType;
- u8 bDataType;
- u8 bDataCounter;
- __be16 wBaseAddrHi;
- __be16 wBaseAddrLo;
- u8 bData[0];
-} __packed;
-
-/* Interrupt codes */
-#define MXU1_CODE_HARDWARE_ERROR 0xFF
-#define MXU1_CODE_DATA_ERROR 0x03
-#define MXU1_CODE_MODEM_STATUS 0x04
-
-static inline int mxu1_get_func_from_code(unsigned char code)
-{
- return code & 0x0f;
-}
-
-/* Download firmware max packet size */
-#define MXU1_DOWNLOAD_MAX_PACKET_SIZE 64
-
-/* Firmware image header */
-struct mxu1_firmware_header {
- __le16 wLength;
- u8 bCheckSum;
-} __packed;
-
-#define MXU1_UART_BASE_ADDR 0xFFA0
-#define MXU1_UART_OFFSET_MCR 0x0004
-
-#define MXU1_BAUD_BASE 923077
-
-#define MXU1_TRANSFER_TIMEOUT 2
-#define MXU1_DOWNLOAD_TIMEOUT 1000
-#define MXU1_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
-
-struct mxu1_port {
- u8 msr;
- u8 mcr;
- u8 uart_mode;
- spinlock_t spinlock; /* Protects msr */
- struct mutex mutex; /* Protects mcr */
- bool send_break;
-};
-
-struct mxu1_device {
- u16 mxd_model;
-};
-
-static const struct usb_device_id mxu1_idtable[] = {
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
- { }
-};
-
-MODULE_DEVICE_TABLE(usb, mxu1_idtable);
-
-/* Write the given buffer out to the control pipe. */
-static int mxu1_send_ctrl_data_urb(struct usb_serial *serial,
- u8 request,
- u16 value, u16 index,
- void *data, size_t size)
-{
- int status;
-
- status = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- request,
- (USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE), value, index,
- data, size,
- USB_CTRL_SET_TIMEOUT);
- if (status < 0) {
- dev_err(&serial->interface->dev,
- "%s - usb_control_msg failed: %d\n",
- __func__, status);
- return status;
- }
-
- if (status != size) {
- dev_err(&serial->interface->dev,
- "%s - short write (%d / %zd)\n",
- __func__, status, size);
- return -EIO;
- }
-
- return 0;
-}
-
-/* Send a vendor request without any data */
-static int mxu1_send_ctrl_urb(struct usb_serial *serial,
- u8 request, u16 value, u16 index)
-{
- return mxu1_send_ctrl_data_urb(serial, request, value, index,
- NULL, 0);
-}
-
-static int mxu1_download_firmware(struct usb_serial *serial,
- const struct firmware *fw_p)
-{
- int status = 0;
- int buffer_size;
- int pos;
- int len;
- int done;
- u8 cs = 0;
- u8 *buffer;
- struct usb_device *dev = serial->dev;
- struct mxu1_firmware_header *header;
- unsigned int pipe;
-
- pipe = usb_sndbulkpipe(dev, serial->port[0]->bulk_out_endpointAddress);
-
- buffer_size = fw_p->size + sizeof(*header);
- buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- memcpy(buffer, fw_p->data, fw_p->size);
- memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
-
- for (pos = sizeof(*header); pos < buffer_size; pos++)
- cs = (u8)(cs + buffer[pos]);
-
- header = (struct mxu1_firmware_header *)buffer;
- header->wLength = cpu_to_le16(buffer_size - sizeof(*header));
- header->bCheckSum = cs;
-
- dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
-
- for (pos = 0; pos < buffer_size; pos += done) {
- len = min(buffer_size - pos, MXU1_DOWNLOAD_MAX_PACKET_SIZE);
-
- status = usb_bulk_msg(dev, pipe, buffer + pos, len, &done,
- MXU1_DOWNLOAD_TIMEOUT);
- if (status)
- break;
- }
-
- kfree(buffer);
-
- if (status) {
- dev_err(&dev->dev, "failed to download firmware: %d\n", status);
- return status;
- }
-
- msleep_interruptible(100);
- usb_reset_device(dev);
-
- dev_dbg(&dev->dev, "%s - download successful\n", __func__);
-
- return 0;
-}
-
-static int mxu1_port_probe(struct usb_serial_port *port)
-{
- struct mxu1_port *mxport;
- struct mxu1_device *mxdev;
-
- if (!port->interrupt_in_urb) {
- dev_err(&port->dev, "no interrupt urb\n");
- return -ENODEV;
- }
-
- mxport = kzalloc(sizeof(struct mxu1_port), GFP_KERNEL);
- if (!mxport)
- return -ENOMEM;
-
- spin_lock_init(&mxport->spinlock);
- mutex_init(&mxport->mutex);
-
- mxdev = usb_get_serial_data(port->serial);
-
- switch (mxdev->mxd_model) {
- case MXU1_1110_PRODUCT_ID:
- case MXU1_1150_PRODUCT_ID:
- case MXU1_1151_PRODUCT_ID:
- mxport->uart_mode = MXU1_UART_232;
- break;
- case MXU1_1130_PRODUCT_ID:
- case MXU1_1131_PRODUCT_ID:
- mxport->uart_mode = MXU1_UART_485_RECEIVER_DISABLED;
- break;
- }
-
- usb_set_serial_port_data(port, mxport);
-
- port->port.closing_wait =
- msecs_to_jiffies(MXU1_DEFAULT_CLOSING_WAIT * 10);
- port->port.drain_delay = 1;
-
- return 0;
-}
-
-static int mxu1_port_remove(struct usb_serial_port *port)
-{
- struct mxu1_port *mxport;
-
- mxport = usb_get_serial_port_data(port);
- kfree(mxport);
-
- return 0;
-}
-
-static int mxu1_startup(struct usb_serial *serial)
-{
- struct mxu1_device *mxdev;
- struct usb_device *dev = serial->dev;
- struct usb_host_interface *cur_altsetting;
- char fw_name[32];
- const struct firmware *fw_p = NULL;
- int err;
-
- dev_dbg(&serial->interface->dev, "%s - product 0x%04X, num configurations %d, configuration value %d\n",
- __func__, le16_to_cpu(dev->descriptor.idProduct),
- dev->descriptor.bNumConfigurations,
- dev->actconfig->desc.bConfigurationValue);
-
- /* create device structure */
- mxdev = kzalloc(sizeof(struct mxu1_device), GFP_KERNEL);
- if (!mxdev)
- return -ENOMEM;
-
- usb_set_serial_data(serial, mxdev);
-
- mxdev->mxd_model = le16_to_cpu(dev->descriptor.idProduct);
-
- cur_altsetting = serial->interface->cur_altsetting;
-
- /* if we have only 1 configuration, download firmware */
- if (cur_altsetting->desc.bNumEndpoints == 1) {
-
- snprintf(fw_name,
- sizeof(fw_name),
- "moxa/moxa-%04x.fw",
- mxdev->mxd_model);
-
- err = request_firmware(&fw_p, fw_name, &serial->interface->dev);
- if (err) {
- dev_err(&serial->interface->dev, "failed to request firmware: %d\n",
- err);
- goto err_free_mxdev;
- }
-
- err = mxu1_download_firmware(serial, fw_p);
- if (err)
- goto err_release_firmware;
-
- /* device is being reset */
- err = -ENODEV;
- goto err_release_firmware;
- }
-
- return 0;
-
-err_release_firmware:
- release_firmware(fw_p);
-err_free_mxdev:
- kfree(mxdev);
-
- return err;
-}
-
-static void mxu1_release(struct usb_serial *serial)
-{
- struct mxu1_device *mxdev;
-
- mxdev = usb_get_serial_data(serial);
- kfree(mxdev);
-}
-
-static int mxu1_write_byte(struct usb_serial_port *port, u32 addr,
- u8 mask, u8 byte)
-{
- int status;
- size_t size;
- struct mxu1_write_data_bytes *data;
-
- dev_dbg(&port->dev, "%s - addr 0x%08X, mask 0x%02X, byte 0x%02X\n",
- __func__, addr, mask, byte);
-
- size = sizeof(struct mxu1_write_data_bytes) + 2;
- data = kzalloc(size, GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->bAddrType = MXU1_RW_DATA_ADDR_XDATA;
- data->bDataType = MXU1_RW_DATA_BYTE;
- data->bDataCounter = 1;
- data->wBaseAddrHi = cpu_to_be16(addr >> 16);
- data->wBaseAddrLo = cpu_to_be16(addr);
- data->bData[0] = mask;
- data->bData[1] = byte;
-
- status = mxu1_send_ctrl_data_urb(port->serial, MXU1_WRITE_DATA, 0,
- MXU1_RAM_PORT, data, size);
- if (status < 0)
- dev_err(&port->dev, "%s - failed: %d\n", __func__, status);
-
- kfree(data);
-
- return status;
-}
-
-static int mxu1_set_mcr(struct usb_serial_port *port, unsigned int mcr)
-{
- int status;
-
- status = mxu1_write_byte(port,
- MXU1_UART_BASE_ADDR + MXU1_UART_OFFSET_MCR,
- MXU1_MCR_RTS | MXU1_MCR_DTR | MXU1_MCR_LOOP,
- mcr);
- return status;
-}
-
-static void mxu1_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios)
-{
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- struct mxu1_uart_config *config;
- tcflag_t cflag, iflag;
- speed_t baud;
- int status;
- unsigned int mcr;
-
- cflag = tty->termios.c_cflag;
- iflag = tty->termios.c_iflag;
-
- if (old_termios &&
- !tty_termios_hw_change(&tty->termios, old_termios) &&
- tty->termios.c_iflag == old_termios->c_iflag) {
- dev_dbg(&port->dev, "%s - nothing to change\n", __func__);
- return;
- }
-
- dev_dbg(&port->dev,
- "%s - cflag 0x%08x, iflag 0x%08x\n", __func__, cflag, iflag);
-
- if (old_termios) {
- dev_dbg(&port->dev, "%s - old cflag 0x%08x, old iflag 0x%08x\n",
- __func__,
- old_termios->c_cflag,
- old_termios->c_iflag);
- }
-
- config = kzalloc(sizeof(*config), GFP_KERNEL);
- if (!config)
- return;
-
- /* these flags must be set */
- config->wFlags |= MXU1_UART_ENABLE_MS_INTS;
- config->wFlags |= MXU1_UART_ENABLE_AUTO_START_DMA;
- if (mxport->send_break)
- config->wFlags |= MXU1_UART_SEND_BREAK_SIGNAL;
- config->bUartMode = mxport->uart_mode;
-
- switch (C_CSIZE(tty)) {
- case CS5:
- config->bDataBits = MXU1_UART_5_DATA_BITS;
- break;
- case CS6:
- config->bDataBits = MXU1_UART_6_DATA_BITS;
- break;
- case CS7:
- config->bDataBits = MXU1_UART_7_DATA_BITS;
- break;
- default:
- case CS8:
- config->bDataBits = MXU1_UART_8_DATA_BITS;
- break;
- }
-
- if (C_PARENB(tty)) {
- config->wFlags |= MXU1_UART_ENABLE_PARITY_CHECKING;
- if (C_CMSPAR(tty)) {
- if (C_PARODD(tty))
- config->bParity = MXU1_UART_MARK_PARITY;
- else
- config->bParity = MXU1_UART_SPACE_PARITY;
- } else {
- if (C_PARODD(tty))
- config->bParity = MXU1_UART_ODD_PARITY;
- else
- config->bParity = MXU1_UART_EVEN_PARITY;
- }
- } else {
- config->bParity = MXU1_UART_NO_PARITY;
- }
-
- if (C_CSTOPB(tty))
- config->bStopBits = MXU1_UART_2_STOP_BITS;
- else
- config->bStopBits = MXU1_UART_1_STOP_BITS;
-
- if (C_CRTSCTS(tty)) {
- /* RTS flow control must be off to drop RTS for baud rate B0 */
- if (C_BAUD(tty) != B0)
- config->wFlags |= MXU1_UART_ENABLE_RTS_IN;
- config->wFlags |= MXU1_UART_ENABLE_CTS_OUT;
- }
-
- if (I_IXOFF(tty) || I_IXON(tty)) {
- config->cXon = START_CHAR(tty);
- config->cXoff = STOP_CHAR(tty);
-
- if (I_IXOFF(tty))
- config->wFlags |= MXU1_UART_ENABLE_X_IN;
-
- if (I_IXON(tty))
- config->wFlags |= MXU1_UART_ENABLE_X_OUT;
- }
-
- baud = tty_get_baud_rate(tty);
- if (!baud)
- baud = 9600;
- config->wBaudRate = MXU1_BAUD_BASE / baud;
-
- dev_dbg(&port->dev, "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
- __func__, baud, config->wBaudRate, config->wFlags,
- config->bDataBits, config->bParity, config->bStopBits,
- config->cXon, config->cXoff, config->bUartMode);
-
- cpu_to_be16s(&config->wBaudRate);
- cpu_to_be16s(&config->wFlags);
-
- status = mxu1_send_ctrl_data_urb(port->serial, MXU1_SET_CONFIG, 0,
- MXU1_UART1_PORT, config,
- sizeof(*config));
- if (status)
- dev_err(&port->dev, "cannot set config: %d\n", status);
-
- mutex_lock(&mxport->mutex);
- mcr = mxport->mcr;
-
- if (C_BAUD(tty) == B0)
- mcr &= ~(MXU1_MCR_DTR | MXU1_MCR_RTS);
- else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
- mcr |= MXU1_MCR_DTR | MXU1_MCR_RTS;
-
- status = mxu1_set_mcr(port, mcr);
- if (status)
- dev_err(&port->dev, "cannot set modem control: %d\n", status);
- else
- mxport->mcr = mcr;
-
- mutex_unlock(&mxport->mutex);
-
- kfree(config);
-}
-
-static int mxu1_get_serial_info(struct usb_serial_port *port,
- struct serial_struct __user *ret_arg)
-{
- struct serial_struct ret_serial;
- unsigned cwait;
-
- if (!ret_arg)
- return -EFAULT;
-
- cwait = port->port.closing_wait;
- if (cwait != ASYNC_CLOSING_WAIT_NONE)
- cwait = jiffies_to_msecs(cwait) / 10;
-
- memset(&ret_serial, 0, sizeof(ret_serial));
-
- ret_serial.type = PORT_16550A;
- ret_serial.line = port->minor;
- ret_serial.port = 0;
- ret_serial.xmit_fifo_size = port->bulk_out_size;
- ret_serial.baud_base = MXU1_BAUD_BASE;
- ret_serial.close_delay = 5*HZ;
- ret_serial.closing_wait = cwait;
-
- if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int mxu1_set_serial_info(struct usb_serial_port *port,
- struct serial_struct __user *new_arg)
-{
- struct serial_struct new_serial;
- unsigned cwait;
-
- if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
- return -EFAULT;
-
- cwait = new_serial.closing_wait;
- if (cwait != ASYNC_CLOSING_WAIT_NONE)
- cwait = msecs_to_jiffies(10 * new_serial.closing_wait);
-
- port->port.closing_wait = cwait;
-
- return 0;
-}
-
-static int mxu1_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- struct usb_serial_port *port = tty->driver_data;
-
- switch (cmd) {
- case TIOCGSERIAL:
- return mxu1_get_serial_info(port,
- (struct serial_struct __user *)arg);
- case TIOCSSERIAL:
- return mxu1_set_serial_info(port,
- (struct serial_struct __user *)arg);
- }
-
- return -ENOIOCTLCMD;
-}
-
-static int mxu1_tiocmget(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- unsigned int result;
- unsigned int msr;
- unsigned int mcr;
- unsigned long flags;
-
- mutex_lock(&mxport->mutex);
- spin_lock_irqsave(&mxport->spinlock, flags);
-
- msr = mxport->msr;
- mcr = mxport->mcr;
-
- spin_unlock_irqrestore(&mxport->spinlock, flags);
- mutex_unlock(&mxport->mutex);
-
- result = ((mcr & MXU1_MCR_DTR) ? TIOCM_DTR : 0) |
- ((mcr & MXU1_MCR_RTS) ? TIOCM_RTS : 0) |
- ((mcr & MXU1_MCR_LOOP) ? TIOCM_LOOP : 0) |
- ((msr & MXU1_MSR_CTS) ? TIOCM_CTS : 0) |
- ((msr & MXU1_MSR_CD) ? TIOCM_CAR : 0) |
- ((msr & MXU1_MSR_RI) ? TIOCM_RI : 0) |
- ((msr & MXU1_MSR_DSR) ? TIOCM_DSR : 0);
-
- dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
-
- return result;
-}
-
-static int mxu1_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- int err;
- unsigned int mcr;
-
- mutex_lock(&mxport->mutex);
- mcr = mxport->mcr;
-
- if (set & TIOCM_RTS)
- mcr |= MXU1_MCR_RTS;
- if (set & TIOCM_DTR)
- mcr |= MXU1_MCR_DTR;
- if (set & TIOCM_LOOP)
- mcr |= MXU1_MCR_LOOP;
-
- if (clear & TIOCM_RTS)
- mcr &= ~MXU1_MCR_RTS;
- if (clear & TIOCM_DTR)
- mcr &= ~MXU1_MCR_DTR;
- if (clear & TIOCM_LOOP)
- mcr &= ~MXU1_MCR_LOOP;
-
- err = mxu1_set_mcr(port, mcr);
- if (!err)
- mxport->mcr = mcr;
-
- mutex_unlock(&mxport->mutex);
-
- return err;
-}
-
-static void mxu1_break(struct tty_struct *tty, int break_state)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
-
- if (break_state == -1)
- mxport->send_break = true;
- else
- mxport->send_break = false;
-
- mxu1_set_termios(tty, port, NULL);
-}
-
-static int mxu1_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- struct usb_serial *serial = port->serial;
- int status;
- u16 open_settings;
-
- open_settings = (MXU1_PIPE_MODE_CONTINUOUS |
- MXU1_PIPE_TIMEOUT_ENABLE |
- (MXU1_TRANSFER_TIMEOUT << 2));
-
- mxport->msr = 0;
-
- status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
- if (status) {
- dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
- status);
- return status;
- }
-
- if (tty)
- mxu1_set_termios(tty, port, NULL);
-
- status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
- open_settings, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send open command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
- 0, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send start command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_PURGE_PORT,
- MXU1_PURGE_INPUT, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot clear input buffers: %d\n",
- status);
-
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_PURGE_PORT,
- MXU1_PURGE_OUTPUT, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot clear output buffers: %d\n",
- status);
-
- goto unlink_int_urb;
- }
-
- /*
- * reset the data toggle on the bulk endpoints to work around bug in
- * host controllers where things get out of sync some times
- */
- usb_clear_halt(serial->dev, port->write_urb->pipe);
- usb_clear_halt(serial->dev, port->read_urb->pipe);
-
- if (tty)
- mxu1_set_termios(tty, port, NULL);
-
- status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
- open_settings, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send open command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
- 0, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send start command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = usb_serial_generic_open(tty, port);
- if (status)
- goto unlink_int_urb;
-
- return 0;
-
-unlink_int_urb:
- usb_kill_urb(port->interrupt_in_urb);
-
- return status;
-}
-
-static void mxu1_close(struct usb_serial_port *port)
-{
- int status;
-
- usb_serial_generic_close(port);
- usb_kill_urb(port->interrupt_in_urb);
-
- status = mxu1_send_ctrl_urb(port->serial, MXU1_CLOSE_PORT,
- 0, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "failed to send close port command: %d\n",
- status);
- }
-}
-
-static void mxu1_handle_new_msr(struct usb_serial_port *port, u8 msr)
-{
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- struct async_icount *icount;
- unsigned long flags;
-
- dev_dbg(&port->dev, "%s - msr 0x%02X\n", __func__, msr);
-
- spin_lock_irqsave(&mxport->spinlock, flags);
- mxport->msr = msr & MXU1_MSR_MASK;
- spin_unlock_irqrestore(&mxport->spinlock, flags);
-
- if (msr & MXU1_MSR_DELTA_MASK) {
- icount = &port->icount;
- if (msr & MXU1_MSR_DELTA_CTS)
- icount->cts++;
- if (msr & MXU1_MSR_DELTA_DSR)
- icount->dsr++;
- if (msr & MXU1_MSR_DELTA_CD)
- icount->dcd++;
- if (msr & MXU1_MSR_DELTA_RI)
- icount->rng++;
-
- wake_up_interruptible(&port->port.delta_msr_wait);
- }
-}
-
-static void mxu1_interrupt_callback(struct urb *urb)
-{
- struct usb_serial_port *port = urb->context;
- unsigned char *data = urb->transfer_buffer;
- int length = urb->actual_length;
- int function;
- int status;
- u8 msr;
-
- switch (urb->status) {
- case 0:
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- dev_dbg(&port->dev, "%s - urb shutting down: %d\n",
- __func__, urb->status);
- return;
- default:
- dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
- __func__, urb->status);
- goto exit;
- }
-
- if (length != 2) {
- dev_dbg(&port->dev, "%s - bad packet size: %d\n",
- __func__, length);
- goto exit;
- }
-
- if (data[0] == MXU1_CODE_HARDWARE_ERROR) {
- dev_err(&port->dev, "hardware error: %d\n", data[1]);
- goto exit;
- }
-
- function = mxu1_get_func_from_code(data[0]);
-
- dev_dbg(&port->dev, "%s - function %d, data 0x%02X\n",
- __func__, function, data[1]);
-
- switch (function) {
- case MXU1_CODE_DATA_ERROR:
- dev_dbg(&port->dev, "%s - DATA ERROR, data 0x%02X\n",
- __func__, data[1]);
- break;
-
- case MXU1_CODE_MODEM_STATUS:
- msr = data[1];
- mxu1_handle_new_msr(port, msr);
- break;
-
- default:
- dev_err(&port->dev, "unknown interrupt code: 0x%02X\n",
- data[1]);
- break;
- }
-
-exit:
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status) {
- dev_err(&port->dev, "resubmit interrupt urb failed: %d\n",
- status);
- }
-}
-
-static struct usb_serial_driver mxu11x0_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "mxu11x0",
- },
- .description = "MOXA UPort 11x0",
- .id_table = mxu1_idtable,
- .num_ports = 1,
- .port_probe = mxu1_port_probe,
- .port_remove = mxu1_port_remove,
- .attach = mxu1_startup,
- .release = mxu1_release,
- .open = mxu1_open,
- .close = mxu1_close,
- .ioctl = mxu1_ioctl,
- .set_termios = mxu1_set_termios,
- .tiocmget = mxu1_tiocmget,
- .tiocmset = mxu1_tiocmset,
- .tiocmiwait = usb_serial_generic_tiocmiwait,
- .get_icount = usb_serial_generic_get_icount,
- .break_ctl = mxu1_break,
- .read_int_callback = mxu1_interrupt_callback,
-};
-
-static struct usb_serial_driver *const serial_drivers[] = {
- &mxu11x0_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, mxu1_idtable);
-
-MODULE_AUTHOR("Mathieu Othacehe <m.othacehe@gmail.com>");
-MODULE_DESCRIPTION("MOXA UPort 11x0 USB to Serial Hub Driver");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("moxa/moxa-1110.fw");
-MODULE_FIRMWARE("moxa/moxa-1130.fw");
-MODULE_FIRMWARE("moxa/moxa-1131.fw");
-MODULE_FIRMWARE("moxa/moxa-1150.fw");
-MODULE_FIRMWARE("moxa/moxa-1151.fw");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 8849439a8f18..348e19834b83 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -270,6 +270,7 @@ static void option_instat_callback(struct urb *urb);
#define TELIT_PRODUCT_UE910_V2 0x1012
#define TELIT_PRODUCT_LE922_USBCFG0 0x1042
#define TELIT_PRODUCT_LE922_USBCFG3 0x1043
+#define TELIT_PRODUCT_LE922_USBCFG5 0x1045
#define TELIT_PRODUCT_LE920 0x1200
#define TELIT_PRODUCT_LE910 0x1201
@@ -1132,6 +1133,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9003), /* Quectel UC20 */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
@@ -1183,6 +1186,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
+ .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 9919d2a9faf2..1bc6089b9008 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -157,14 +157,17 @@ static const struct usb_device_id id_table[] = {
{DEVICE_SWI(0x1199, 0x9056)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9060)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9061)}, /* Sierra Wireless Modem */
- {DEVICE_SWI(0x1199, 0x9070)}, /* Sierra Wireless MC74xx/EM74xx */
- {DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx/EM74xx */
+ {DEVICE_SWI(0x1199, 0x9070)}, /* Sierra Wireless MC74xx */
+ {DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx */
+ {DEVICE_SWI(0x1199, 0x9078)}, /* Sierra Wireless EM74xx */
+ {DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a9)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81b1)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
+ {DEVICE_SWI(0x413c, 0x81b3)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
/* Huawei devices */
{DEVICE_HWI(0x03f0, 0x581d)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 504f5bff79c0..2df8ad5ede89 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -973,7 +973,7 @@ static int qt2_write(struct tty_struct *tty,
data = write_urb->transfer_buffer;
spin_lock_irqsave(&port_priv->urb_lock, flags);
- if (port_priv->urb_in_use == true) {
+ if (port_priv->urb_in_use) {
dev_err(&port->dev, "qt2_write - urb is in use\n");
goto write_out;
}
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index b2dff0f14743..93c6c9b08daa 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -76,13 +76,8 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
-
-#ifndef CONFIG_USB_SERIAL_SAFE_PADDED
-#define CONFIG_USB_SERIAL_SAFE_PADDED 0
-#endif
-
-static bool safe = 1;
-static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED;
+static bool safe = true;
+static bool padded = IS_ENABLED(CONFIG_USB_SERIAL_SAFE_PADDED);
#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>"
#define DRIVER_DESC "USB Safe Encapsulated Serial"
@@ -278,7 +273,7 @@ static int safe_startup(struct usb_serial *serial)
case LINEO_SAFESERIAL_CRC:
break;
case LINEO_SAFESERIAL_CRC_PADDED:
- padded = 1;
+ padded = true;
break;
default:
return -EINVAL;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.