aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.c264
-rw-r--r--drivers/usb/gadget/atmel_usba_udc.h2
-rw-r--r--drivers/usb/musb/ux500.c61
-rw-r--r--drivers/usb/musb/ux500_dma.c59
5 files changed, 280 insertions, 108 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 01b8229fa862..62f6802f6e0f 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -155,7 +155,7 @@ config USB_LPC32XX
config USB_ATMEL_USBA
tristate "Atmel USBA"
- depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ depends on AVR32 || ARCH_AT91
help
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 5a5128a226f7..1d9722203ca6 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -22,15 +22,13 @@
#include <linux/usb/atmel_usba_udc.h>
#include <linux/delay.h>
#include <linux/platform_data/atmel.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <asm/gpio.h>
#include "atmel_usba_udc.h"
-
-static struct usba_udc the_udc;
-static struct usba_ep *usba_ep;
-
#ifdef CONFIG_USB_GADGET_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/uaccess.h>
@@ -1014,16 +1012,13 @@ static void nop_release(struct device *dev)
}
-static struct usba_udc the_udc = {
- .gadget = {
- .ops = &usba_udc_ops,
- .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
- .max_speed = USB_SPEED_HIGH,
- .name = "atmel_usba_udc",
- .dev = {
- .init_name = "gadget",
- .release = nop_release,
- },
+struct usb_gadget usba_gadget_template = {
+ .ops = &usba_udc_ops,
+ .max_speed = USB_SPEED_HIGH,
+ .name = "atmel_usba_udc",
+ .dev = {
+ .init_name = "gadget",
+ .release = nop_release,
},
};
@@ -1147,7 +1142,7 @@ static int do_test_mode(struct usba_udc *udc)
* Test_SE0_NAK: Force high-speed mode and set up ep0
* for Bulk IN transfers
*/
- ep = &usba_ep[0];
+ ep = &udc->usba_ep[0];
usba_writel(udc, TST,
USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
usba_ep_writel(ep, CFG,
@@ -1165,7 +1160,7 @@ static int do_test_mode(struct usba_udc *udc)
break;
case 0x0400:
/* Test_Packet */
- ep = &usba_ep[0];
+ ep = &udc->usba_ep[0];
usba_ep_writel(ep, CFG,
USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
| USBA_EPT_DIR_IN
@@ -1668,7 +1663,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
for (i = 1; i < USBA_NR_ENDPOINTS; i++)
if (dma_status & (1 << i))
- usba_dma_irq(udc, &usba_ep[i]);
+ usba_dma_irq(udc, &udc->usba_ep[i]);
}
ep_status = USBA_BFEXT(EPT_INT, status);
@@ -1677,10 +1672,10 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
for (i = 0; i < USBA_NR_ENDPOINTS; i++)
if (ep_status & (1 << i)) {
- if (ep_is_control(&usba_ep[i]))
- usba_control_irq(udc, &usba_ep[i]);
+ if (ep_is_control(&udc->usba_ep[i]))
+ usba_control_irq(udc, &udc->usba_ep[i]);
else
- usba_ep_irq(udc, &usba_ep[i]);
+ usba_ep_irq(udc, &udc->usba_ep[i]);
}
}
@@ -1705,7 +1700,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
DBG(DBG_BUS, "%s bus reset detected\n",
usb_speed_string(udc->gadget.speed));
- ep0 = &usba_ep[0];
+ ep0 = &udc->usba_ep[0];
ep0->ep.desc = &usba_ep0_desc;
ep0->state = WAIT_FOR_SETUP;
usba_ep_writel(ep0, CFG,
@@ -1835,17 +1830,158 @@ static int atmel_usba_stop(struct usb_gadget *gadget,
return 0;
}
-static int __init usba_udc_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
+ struct usba_udc *udc)
+{
+ u32 val;
+ const char *name;
+ enum of_gpio_flags flags;
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *pp;
+ int i, ret;
+ struct usba_ep *eps, *ep;
+
+ udc->num_ep = 0;
+
+ udc->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0,
+ &flags);
+ udc->vbus_pin_inverted = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+
+ pp = NULL;
+ while ((pp = of_get_next_child(np, pp)))
+ udc->num_ep++;
+
+ eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * udc->num_ep,
+ GFP_KERNEL);
+ if (!eps)
+ return ERR_PTR(-ENOMEM);
+
+ udc->gadget.ep0 = &eps[0].ep;
+
+ INIT_LIST_HEAD(&eps[0].ep.ep_list);
+
+ pp = NULL;
+ i = 0;
+ while ((pp = of_get_next_child(np, pp))) {
+ ep = &eps[i];
+
+ ret = of_property_read_u32(pp, "reg", &val);
+ if (ret) {
+ dev_err(&pdev->dev, "of_probe: reg error(%d)\n", ret);
+ goto err;
+ }
+ ep->index = val;
+
+ ret = of_property_read_u32(pp, "atmel,fifo-size", &val);
+ if (ret) {
+ dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret);
+ goto err;
+ }
+ ep->fifo_size = val;
+
+ ret = of_property_read_u32(pp, "atmel,nb-banks", &val);
+ if (ret) {
+ dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret);
+ goto err;
+ }
+ ep->nr_banks = val;
+
+ ep->can_dma = of_property_read_bool(pp, "atmel,can-dma");
+ ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc");
+
+ ret = of_property_read_string(pp, "name", &name);
+ ep->ep.name = name;
+
+ ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
+ ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
+ ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
+ ep->ep.ops = &usba_ep_ops;
+ ep->ep.maxpacket = ep->fifo_size;
+ ep->udc = udc;
+ INIT_LIST_HEAD(&ep->queue);
+
+ if (i)
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+
+ i++;
+ }
+
+ return eps;
+err:
+ return ERR_PTR(ret);
+}
+#else
+static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
+ struct usba_udc *udc)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif
+
+static struct usba_ep * usba_udc_pdata(struct platform_device *pdev,
+ struct usba_udc *udc)
{
struct usba_platform_data *pdata = pdev->dev.platform_data;
+ struct usba_ep *eps;
+ int i;
+
+ if (!pdata)
+ return ERR_PTR(-ENXIO);
+
+ eps = devm_kzalloc(&pdev->dev, sizeof(struct usba_ep) * pdata->num_ep,
+ GFP_KERNEL);
+ if (!eps)
+ return ERR_PTR(-ENOMEM);
+
+ udc->gadget.ep0 = &eps[0].ep;
+
+ udc->vbus_pin = pdata->vbus_pin;
+ udc->vbus_pin_inverted = pdata->vbus_pin_inverted;
+ udc->num_ep = pdata->num_ep;
+
+ INIT_LIST_HEAD(&eps[0].ep.ep_list);
+
+ for (i = 0; i < pdata->num_ep; i++) {
+ struct usba_ep *ep = &eps[i];
+
+ ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
+ ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
+ ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
+ ep->ep.ops = &usba_ep_ops;
+ ep->ep.name = pdata->ep[i].name;
+ ep->fifo_size = ep->ep.maxpacket = pdata->ep[i].fifo_size;
+ ep->udc = udc;
+ INIT_LIST_HEAD(&ep->queue);
+ ep->nr_banks = pdata->ep[i].nr_banks;
+ ep->index = pdata->ep[i].index;
+ ep->can_dma = pdata->ep[i].can_dma;
+ ep->can_isoc = pdata->ep[i].can_isoc;
+
+ if (i)
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+ }
+
+ return eps;
+}
+
+static int __init usba_udc_probe(struct platform_device *pdev)
+{
struct resource *regs, *fifo;
struct clk *pclk, *hclk;
- struct usba_udc *udc = &the_udc;
+ struct usba_udc *udc;
int irq, ret, i;
+ udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL);
+ if (!udc)
+ return -ENOMEM;
+
+ udc->gadget = usba_gadget_template;
+ INIT_LIST_HEAD(&udc->gadget.ep_list);
+
regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
- if (!regs || !fifo || !pdata)
+ if (!regs || !fifo)
return -ENXIO;
irq = platform_get_irq(pdev, 0);
@@ -1891,46 +2027,14 @@ static int __init usba_udc_probe(struct platform_device *pdev)
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
clk_disable(pclk);
- usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep,
- GFP_KERNEL);
- if (!usba_ep)
- goto err_alloc_ep;
-
- the_udc.gadget.ep0 = &usba_ep[0].ep;
-
- INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
- usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
- usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
- usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
- usba_ep[0].ep.ops = &usba_ep_ops;
- usba_ep[0].ep.name = pdata->ep[0].name;
- usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
- usba_ep[0].udc = &the_udc;
- INIT_LIST_HEAD(&usba_ep[0].queue);
- usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
- usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
- usba_ep[0].index = pdata->ep[0].index;
- usba_ep[0].can_dma = pdata->ep[0].can_dma;
- usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
-
- for (i = 1; i < pdata->num_ep; i++) {
- struct usba_ep *ep = &usba_ep[i];
-
- ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
- ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
- ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
- ep->ep.ops = &usba_ep_ops;
- ep->ep.name = pdata->ep[i].name;
- ep->ep.maxpacket = pdata->ep[i].fifo_size;
- ep->udc = &the_udc;
- INIT_LIST_HEAD(&ep->queue);
- ep->fifo_size = pdata->ep[i].fifo_size;
- ep->nr_banks = pdata->ep[i].nr_banks;
- ep->index = pdata->ep[i].index;
- ep->can_dma = pdata->ep[i].can_dma;
- ep->can_isoc = pdata->ep[i].can_isoc;
+ if (pdev->dev.of_node)
+ udc->usba_ep = atmel_udc_of_init(pdev, udc);
+ else
+ udc->usba_ep = usba_udc_pdata(pdev, udc);
- list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+ if (IS_ERR(udc->usba_ep)) {
+ ret = PTR_ERR(udc->usba_ep);
+ goto err_alloc_ep;
}
ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc);
@@ -1941,16 +2045,12 @@ static int __init usba_udc_probe(struct platform_device *pdev)
}
udc->irq = irq;
- if (gpio_is_valid(pdata->vbus_pin)) {
- if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
- udc->vbus_pin = pdata->vbus_pin;
- udc->vbus_pin_inverted = pdata->vbus_pin_inverted;
-
+ if (gpio_is_valid(udc->vbus_pin)) {
+ if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) {
ret = request_irq(gpio_to_irq(udc->vbus_pin),
usba_vbus_irq, 0,
"atmel_usba_udc", udc);
if (ret) {
- gpio_free(udc->vbus_pin);
udc->vbus_pin = -ENODEV;
dev_warn(&udc->pdev->dev,
"failed to request vbus irq; "
@@ -1969,20 +2069,17 @@ static int __init usba_udc_probe(struct platform_device *pdev)
goto err_add_udc;
usba_init_debugfs(udc);
- for (i = 1; i < pdata->num_ep; i++)
- usba_ep_init_debugfs(udc, &usba_ep[i]);
+ for (i = 1; i < udc->num_ep; i++)
+ usba_ep_init_debugfs(udc, &udc->usba_ep[i]);
return 0;
err_add_udc:
- if (gpio_is_valid(pdata->vbus_pin)) {
+ if (gpio_is_valid(udc->vbus_pin))
free_irq(gpio_to_irq(udc->vbus_pin), udc);
- gpio_free(udc->vbus_pin);
- }
free_irq(irq, udc);
err_request_irq:
- kfree(usba_ep);
err_alloc_ep:
iounmap(udc->fifo);
err_map_fifo:
@@ -1999,23 +2096,20 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
{
struct usba_udc *udc;
int i;
- struct usba_platform_data *pdata = pdev->dev.platform_data;
udc = platform_get_drvdata(pdev);
usb_del_gadget_udc(&udc->gadget);
- for (i = 1; i < pdata->num_ep; i++)
- usba_ep_cleanup_debugfs(&usba_ep[i]);
+ for (i = 1; i < udc->num_ep; i++)
+ usba_ep_cleanup_debugfs(&udc->usba_ep[i]);
usba_cleanup_debugfs(udc);
if (gpio_is_valid(udc->vbus_pin)) {
free_irq(gpio_to_irq(udc->vbus_pin), udc);
- gpio_free(udc->vbus_pin);
}
free_irq(udc->irq, udc);
- kfree(usba_ep);
iounmap(udc->fifo);
iounmap(udc->regs);
clk_put(udc->hclk);
@@ -2024,11 +2118,21 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_udc_dt_ids[] = {
+ { .compatible = "atmel,at91sam9rl-udc" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids);
+#endif
+
static struct platform_driver udc_driver = {
.remove = __exit_p(usba_udc_remove),
.driver = {
.name = "atmel_usba_udc",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_udc_dt_ids),
},
};
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index d65a61851d3d..2922db50befe 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -317,8 +317,10 @@ struct usba_udc {
int irq;
int vbus_pin;
int vbus_pin_inverted;
+ int num_ep;
struct clk *pclk;
struct clk *hclk;
+ struct usba_ep *usba_ep;
u16 devstatus;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 028ff4d07dc7..fce71b605936 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -25,11 +25,19 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/usb/musb-ux500.h>
#include "musb_core.h"
+static struct musb_hdrc_config ux500_musb_hdrc_config = {
+ .multipoint = true,
+ .dyn_fifo = true,
+ .num_eps = 16,
+ .ram_bits = 16,
+};
+
struct ux500_glue {
struct device *dev;
struct platform_device *musb;
@@ -187,15 +195,58 @@ static const struct musb_platform_ops ux500_ops = {
.set_vbus = ux500_musb_set_vbus,
};
+static struct musb_hdrc_platform_data *
+ux500_of_probe(struct platform_device *pdev, struct device_node *np)
+{
+ struct musb_hdrc_platform_data *pdata;
+ const char *mode;
+ int strlen;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ mode = of_get_property(np, "dr_mode", &strlen);
+ if (!mode) {
+ dev_err(&pdev->dev, "No 'dr_mode' property found\n");
+ return NULL;
+ }
+
+ if (strlen > 0) {
+ if (!strcmp(mode, "host"))
+ pdata->mode = MUSB_HOST;
+ if (!strcmp(mode, "otg"))
+ pdata->mode = MUSB_OTG;
+ if (!strcmp(mode, "peripheral"))
+ pdata->mode = MUSB_PERIPHERAL;
+ }
+
+ return pdata;
+}
+
static int ux500_probe(struct platform_device *pdev)
{
struct resource musb_resources[2];
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
struct platform_device *musb;
struct ux500_glue *glue;
struct clk *clk;
int ret = -ENOMEM;
+ if (!pdata) {
+ if (np) {
+ pdata = ux500_of_probe(pdev, np);
+ if (!pdata)
+ goto err0;
+
+ pdev->dev.platform_data = pdata;
+ } else {
+ dev_err(&pdev->dev, "no pdata or device tree found\n");
+ goto err0;
+ }
+ }
+
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
if (!glue) {
dev_err(&pdev->dev, "failed to allocate glue context\n");
@@ -222,14 +273,16 @@ static int ux500_probe(struct platform_device *pdev)
}
musb->dev.parent = &pdev->dev;
- musb->dev.dma_mask = pdev->dev.dma_mask;
+ musb->dev.dma_mask = &pdev->dev.coherent_dma_mask;
musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask;
+ musb->dev.of_node = pdev->dev.of_node;
glue->dev = &pdev->dev;
glue->musb = musb;
glue->clk = clk;
pdata->platform_ops = &ux500_ops;
+ pdata->config = &ux500_musb_hdrc_config;
platform_set_drvdata(pdev, glue);
@@ -334,12 +387,18 @@ static const struct dev_pm_ops ux500_pm_ops = {
#define DEV_PM_OPS NULL
#endif
+static const struct of_device_id ux500_match[] = {
+ { .compatible = "stericsson,db8500-musb", },
+ {}
+};
+
static struct platform_driver ux500_driver = {
.probe = ux500_probe,
.remove = ux500_remove,
.driver = {
.name = "musb-ux500",
.pm = DEV_PM_OPS,
+ .of_match_table = ux500_match,
},
};
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 63e7c8a6b125..bfb7a65d83cc 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -34,6 +34,11 @@
#include <linux/platform_data/usb-musb-ux500.h>
#include "musb_core.h"
+static const char *iep_chan_names[] = { "iep_1_9", "iep_2_10", "iep_3_11", "iep_4_12",
+ "iep_5_13", "iep_6_14", "iep_7_15", "iep_8" };
+static const char *oep_chan_names[] = { "oep_1_9", "oep_2_10", "oep_3_11", "oep_4_12",
+ "oep_5_13", "oep_6_14", "oep_7_15", "oep_8" };
+
struct ux500_dma_channel {
struct dma_channel channel;
struct ux500_dma_controller *controller;
@@ -48,10 +53,8 @@ struct ux500_dma_channel {
struct ux500_dma_controller {
struct dma_controller controller;
- struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_CHANNELS];
- struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_TX_CHANNELS];
- u32 num_rx_channels;
- u32 num_tx_channels;
+ struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
+ struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
void *private_data;
dma_addr_t phy_base;
};
@@ -143,19 +146,15 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c,
struct ux500_dma_channel *ux500_channel = NULL;
struct musb *musb = controller->private_data;
u8 ch_num = hw_ep->epnum - 1;
- u32 max_ch;
- /* Max 8 DMA channels (0 - 7). Each DMA channel can only be allocated
+ /* 8 DMA channels (0 - 7). Each DMA channel can only be allocated
* to specified hw_ep. For example DMA channel 0 can only be allocated
* to hw_ep 1 and 9.
*/
if (ch_num > 7)
ch_num -= 8;
- max_ch = is_tx ? controller->num_tx_channels :
- controller->num_rx_channels;
-
- if (ch_num >= max_ch)
+ if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS)
return NULL;
ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) :
@@ -263,7 +262,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c)
struct dma_channel *channel;
u8 ch_num;
- for (ch_num = 0; ch_num < controller->num_rx_channels; ch_num++) {
+ for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
channel = &controller->rx_channel[ch_num].channel;
ux500_channel = channel->private_data;
@@ -273,7 +272,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c)
dma_release_channel(ux500_channel->dma_chan);
}
- for (ch_num = 0; ch_num < controller->num_tx_channels; ch_num++) {
+ for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
channel = &controller->tx_channel[ch_num].channel;
ux500_channel = channel->private_data;
@@ -294,34 +293,36 @@ static int ux500_dma_controller_start(struct dma_controller *c)
struct musb *musb = controller->private_data;
struct device *dev = musb->controller;
struct musb_hdrc_platform_data *plat = dev->platform_data;
- struct ux500_musb_board_data *data = plat->board_data;
+ struct ux500_musb_board_data *data;
struct dma_channel *dma_channel = NULL;
+ char **chan_names;
u32 ch_num;
u8 dir;
u8 is_tx = 0;
void **param_array;
struct ux500_dma_channel *channel_array;
- u32 ch_count;
dma_cap_mask_t mask;
- if ((data->num_rx_channels > UX500_MUSB_DMA_NUM_RX_CHANNELS) ||
- (data->num_tx_channels > UX500_MUSB_DMA_NUM_TX_CHANNELS))
+ if (!plat) {
+ dev_err(musb->controller, "No platform data\n");
return -EINVAL;
+ }
- controller->num_rx_channels = data->num_rx_channels;
- controller->num_tx_channels = data->num_tx_channels;
+ data = plat->board_data;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
/* Prepare the loop for RX channels */
channel_array = controller->rx_channel;
- ch_count = data->num_rx_channels;
- param_array = data->dma_rx_param_array;
+ param_array = data ? data->dma_rx_param_array : NULL;
+ chan_names = (char **)iep_chan_names;
for (dir = 0; dir < 2; dir++) {
- for (ch_num = 0; ch_num < ch_count; ch_num++) {
+ for (ch_num = 0;
+ ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS;
+ ch_num++) {
ux500_channel = &channel_array[ch_num];
ux500_channel->controller = controller;
ux500_channel->ch_num = ch_num;
@@ -332,9 +333,15 @@ static int ux500_dma_controller_start(struct dma_controller *c)
dma_channel->status = MUSB_DMA_STATUS_FREE;
dma_channel->max_len = SZ_16M;
- ux500_channel->dma_chan = dma_request_channel(mask,
- data->dma_filter,
- param_array[ch_num]);
+ ux500_channel->dma_chan =
+ dma_request_slave_channel(dev, chan_names[ch_num]);
+
+ if (!ux500_channel->dma_chan)
+ ux500_channel->dma_chan =
+ dma_request_channel(mask,
+ data->dma_filter,
+ param_array[ch_num]);
+
if (!ux500_channel->dma_chan) {
ERR("Dma pipe allocation error dir=%d ch=%d\n",
dir, ch_num);
@@ -349,8 +356,8 @@ static int ux500_dma_controller_start(struct dma_controller *c)
/* Prepare the loop for TX channels */
channel_array = controller->tx_channel;
- ch_count = data->num_tx_channels;
- param_array = data->dma_tx_param_array;
+ param_array = data ? data->dma_tx_param_array : NULL;
+ chan_names = (char **)oep_chan_names;
is_tx = 1;
}
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.