diff options
Diffstat (limited to 'drivers/usb')
230 files changed, 10109 insertions, 15627 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 6e59d370ef81..275568abc670 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -36,8 +36,7 @@ menuconfig USB_SUPPORT if USB_SUPPORT -config USB_COMMON - tristate +source "drivers/usb/common/Kconfig" config USB_ARCH_HAS_HCD def_bool y @@ -98,8 +97,6 @@ source "drivers/usb/core/Kconfig" source "drivers/usb/mon/Kconfig" -source "drivers/usb/wusbcore/Kconfig" - source "drivers/usb/host/Kconfig" source "drivers/usb/renesas_usbhs/Kconfig" @@ -114,6 +111,8 @@ source "drivers/usb/usbip/Kconfig" endif +source "drivers/usb/cdns3/Kconfig" + source "drivers/usb/mtu3/Kconfig" source "drivers/usb/musb/Kconfig" @@ -175,36 +174,4 @@ source "drivers/usb/typec/Kconfig" source "drivers/usb/roles/Kconfig" -config USB_LED_TRIG - bool "USB LED Triggers" - depends on LEDS_CLASS && LEDS_TRIGGERS - select USB_COMMON - help - This option adds LED triggers for USB host and/or gadget activity. - - Say Y here if you are working on a system with led-class supported - LEDs and you want to use them as activity indicators for USB host or - gadget. - -config USB_ULPI_BUS - tristate "USB ULPI PHY interface support" - select USB_COMMON - help - UTMI+ Low Pin Interface (ULPI) is specification for a commonly used - USB 2.0 PHY interface. The ULPI specification defines a standard set - of registers that can be used to detect the vendor and product which - allows ULPI to be handled as a bus. This module is the driver for that - bus. - - The ULPI interfaces (the buses) are registered by the drivers for USB - controllers which support ULPI register access and have ULPI PHY - attached to them. The ULPI PHY drivers themselves are normal PHY - drivers. - - ULPI PHYs provide often functions such as ADP sensing/probing (OTG - protocol) and USB charger detection. - - To compile this driver as a module, choose M here: the module will - be called ulpi. - endif # USB_SUPPORT diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index ecc2de1ffaae..1c1c1d659394 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -13,6 +13,8 @@ obj-$(CONFIG_USB_DWC3) += dwc3/ obj-$(CONFIG_USB_DWC2) += dwc2/ obj-$(CONFIG_USB_ISP1760) += isp1760/ +obj-$(CONFIG_USB_CDNS3) += cdns3/ + obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_USB_MTU3) += mtu3/ @@ -35,8 +37,6 @@ obj-$(CONFIG_USB_MAX3421_HCD) += host/ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ -obj-$(CONFIG_USB_WUSB) += wusbcore/ - obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_PRINTER) += class/ obj-$(CONFIG_USB_WDM) += class/ diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index e57a2be8754a..5d41f85a7445 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -539,6 +539,37 @@ CXACRU_SET_##_action( adsl_config); CXACRU_ALL_FILES(INIT); +static struct attribute *cxacru_attrs[] = { + &dev_attr_adsl_config.attr, + &dev_attr_adsl_state.attr, + &dev_attr_adsl_controller_version.attr, + &dev_attr_adsl_headend_environment.attr, + &dev_attr_adsl_headend.attr, + &dev_attr_modulation.attr, + &dev_attr_line_startable.attr, + &dev_attr_downstream_hec_errors.attr, + &dev_attr_upstream_hec_errors.attr, + &dev_attr_downstream_fec_errors.attr, + &dev_attr_upstream_fec_errors.attr, + &dev_attr_downstream_crc_errors.attr, + &dev_attr_upstream_crc_errors.attr, + &dev_attr_startup_attempts.attr, + &dev_attr_downstream_bits_per_frame.attr, + &dev_attr_upstream_bits_per_frame.attr, + &dev_attr_transmitter_power.attr, + &dev_attr_downstream_attenuation.attr, + &dev_attr_upstream_attenuation.attr, + &dev_attr_downstream_snr_margin.attr, + &dev_attr_upstream_snr_margin.attr, + &dev_attr_mac_address.attr, + &dev_attr_line_status.attr, + &dev_attr_link_status.attr, + &dev_attr_upstream_rate.attr, + &dev_attr_downstream_rate.attr, + NULL, +}; +ATTRIBUTE_GROUPS(cxacru); + /* the following three functions are stolen from drivers/usb/core/message.c */ static void cxacru_blocking_completion(struct urb *urb) { @@ -736,17 +767,6 @@ static int cxacru_card_status(struct cxacru_data *instance) return 0; } -static void cxacru_remove_device_files(struct usbatm_data *usbatm_instance, - struct atm_dev *atm_dev) -{ - struct usb_interface *intf = usbatm_instance->usb_intf; - - #define CXACRU_DEVICE_REMOVE_FILE(_name) \ - device_remove_file(&intf->dev, &dev_attr_##_name); - CXACRU_ALL_FILES(REMOVE); - #undef CXACRU_DEVICE_REMOVE_FILE -} - static int cxacru_atm_start(struct usbatm_data *usbatm_instance, struct atm_dev *atm_dev) { @@ -765,13 +785,6 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance, return ret; } - #define CXACRU_DEVICE_CREATE_FILE(_name) \ - ret = device_create_file(&intf->dev, &dev_attr_##_name); \ - if (unlikely(ret)) \ - goto fail_sysfs; - CXACRU_ALL_FILES(CREATE); - #undef CXACRU_DEVICE_CREATE_FILE - /* start ADSL */ mutex_lock(&instance->adsl_state_serialize); ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0); @@ -804,11 +817,6 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance, if (start_polling) cxacru_poll_status(&instance->poll_work.work); return 0; - -fail_sysfs: - usb_err(usbatm_instance, "cxacru_atm_start: device_create_file failed (%d)\n", ret); - cxacru_remove_device_files(usbatm_instance, atm_dev); - return ret; } static void cxacru_poll_status(struct work_struct *work) @@ -1332,7 +1340,6 @@ static struct usbatm_driver cxacru_driver = { .heavy_init = cxacru_heavy_init, .unbind = cxacru_unbind, .atm_start = cxacru_atm_start, - .atm_stop = cxacru_remove_device_files, .bulk_in = CXACRU_EP_DATA, .bulk_out = CXACRU_EP_DATA, .rx_padding = 3, @@ -1364,7 +1371,8 @@ static struct usb_driver cxacru_usb_driver = { .name = cxacru_driver_name, .probe = cxacru_usb_probe, .disconnect = usbatm_usb_disconnect, - .id_table = cxacru_usb_ids + .id_table = cxacru_usb_ids, + .dev_groups = cxacru_groups, }; module_usb_driver(cxacru_usb_driver); diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 8faa51b1a520..8b0ea8c70d73 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -2458,7 +2458,7 @@ static int claim_interface(struct usb_device *usb_dev, return ret; } -static struct attribute *attrs[] = { +static struct attribute *uea_attrs[] = { &dev_attr_stat_status.attr, &dev_attr_stat_mflags.attr, &dev_attr_stat_human_status.attr, @@ -2479,9 +2479,7 @@ static struct attribute *attrs[] = { &dev_attr_stat_firmid.attr, NULL, }; -static const struct attribute_group attr_grp = { - .attrs = attrs, -}; +ATTRIBUTE_GROUPS(uea); static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf, const struct usb_device_id *id) @@ -2550,18 +2548,12 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf, } } - ret = sysfs_create_group(&intf->dev.kobj, &attr_grp); - if (ret < 0) - goto error; - ret = uea_boot(sc); if (ret < 0) - goto error_rm_grp; + goto error; return 0; -error_rm_grp: - sysfs_remove_group(&intf->dev.kobj, &attr_grp); error: kfree(sc); return ret; @@ -2571,7 +2563,6 @@ static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf) { struct uea_softc *sc = usbatm->driver_data; - sysfs_remove_group(&intf->dev.kobj, &attr_grp); uea_stop(sc); kfree(sc); } @@ -2721,6 +2712,7 @@ static struct usb_driver uea_driver = { .id_table = uea_ids, .probe = uea_probe, .disconnect = uea_disconnect, + .dev_groups = uea_groups, }; MODULE_DEVICE_TABLE(usb, uea_ids); diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig new file mode 100644 index 000000000000..d0331613a355 --- /dev/null +++ b/drivers/usb/cdns3/Kconfig @@ -0,0 +1,46 @@ +config USB_CDNS3 + tristate "Cadence USB3 Dual-Role Controller" + depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA + select USB_XHCI_PLATFORM if USB_XHCI_HCD + select USB_ROLE_SWITCH + help + Say Y here if your system has a Cadence USB3 dual-role controller. + It supports: dual-role switch, Host-only, and Peripheral-only. + + If you choose to build this driver is a dynamically linked + as module, the module will be called cdns3.ko. + +if USB_CDNS3 + +config USB_CDNS3_GADGET + bool "Cadence USB3 device controller" + depends on USB_GADGET=y || USB_GADGET=USB_CDNS3 + help + Say Y here to enable device controller functionality of the + Cadence USBSS-DEV driver. + + This controller supports FF, HS and SS mode. It doesn't support + LS and SSP mode. + +config USB_CDNS3_HOST + bool "Cadence USB3 host controller" + depends on USB=y || USB=USB_CDNS3 + help + Say Y here to enable host controller functionality of the + Cadence driver. + + Host controller is compliant with XHCI so it will use + standard XHCI driver. + +config USB_CDNS3_PCI_WRAP + tristate "Cadence USB3 support on PCIe-based platforms" + depends on USB_PCI && ACPI + default USB_CDNS3 + help + If you're using the USBSS Core IP with a PCIe, please say + 'Y' or 'M' here. + + If you choose to build this driver as module it will + be dynamically linked and module will be called cdns3-pci.ko + +endif diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile new file mode 100644 index 000000000000..a703547350bb --- /dev/null +++ b/drivers/usb/cdns3/Makefile @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +# define_trace.h needs to know how to find our header +CFLAGS_trace.o := -I$(src) + +cdns3-y := core.o drd.o + +obj-$(CONFIG_USB_CDNS3) += cdns3.o +cdns3-$(CONFIG_USB_CDNS3_GADGET) += gadget.o ep0.o + +ifneq ($(CONFIG_USB_CDNS3_GADGET),) +cdns3-$(CONFIG_TRACING) += trace.o +endif + +cdns3-$(CONFIG_USB_CDNS3_HOST) += host.o + +obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci-wrap.o diff --git a/drivers/usb/cdns3/cdns3-pci-wrap.c b/drivers/usb/cdns3/cdns3-pci-wrap.c new file mode 100644 index 000000000000..c41ddb61b857 --- /dev/null +++ b/drivers/usb/cdns3/cdns3-pci-wrap.c @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS PCI Glue driver + * + * Copyright (C) 2018-2019 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> + +struct cdns3_wrap { + struct platform_device *plat_dev; + struct resource dev_res[6]; + int devfn; +}; + +#define RES_IRQ_HOST_ID 0 +#define RES_IRQ_PERIPHERAL_ID 1 +#define RES_IRQ_OTG_ID 2 +#define RES_HOST_ID 3 +#define RES_DEV_ID 4 +#define RES_DRD_ID 5 + +#define PCI_BAR_HOST 0 +#define PCI_BAR_DEV 2 +#define PCI_BAR_OTG 0 + +#define PCI_DEV_FN_HOST_DEVICE 0 +#define PCI_DEV_FN_OTG 1 + +#define PCI_DRIVER_NAME "cdns3-pci-usbss" +#define PLAT_DRIVER_NAME "cdns-usb3" + +#define CDNS_VENDOR_ID 0x17cd +#define CDNS_DEVICE_ID 0x0100 + +static struct pci_dev *cdns3_get_second_fun(struct pci_dev *pdev) +{ + struct pci_dev *func; + + /* + * Gets the second function. + * It's little tricky, but this platform has two function. + * The fist keeps resources for Host/Device while the second + * keeps resources for DRD/OTG. + */ + func = pci_get_device(pdev->vendor, pdev->device, NULL); + if (unlikely(!func)) + return NULL; + + if (func->devfn == pdev->devfn) { + func = pci_get_device(pdev->vendor, pdev->device, func); + if (unlikely(!func)) + return NULL; + } + + return func; +} + +static int cdns3_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct platform_device_info plat_info; + struct cdns3_wrap *wrap; + struct resource *res; + struct pci_dev *func; + int err; + + /* + * for GADGET/HOST PCI (devfn) function number is 0, + * for OTG PCI (devfn) function number is 1 + */ + if (!id || (pdev->devfn != PCI_DEV_FN_HOST_DEVICE && + pdev->devfn != PCI_DEV_FN_OTG)) + return -EINVAL; + + func = cdns3_get_second_fun(pdev); + if (unlikely(!func)) + return -EINVAL; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", err); + return err; + } + + pci_set_master(pdev); + + if (pci_is_enabled(func)) { + wrap = pci_get_drvdata(func); + } else { + wrap = kzalloc(sizeof(*wrap), GFP_KERNEL); + if (!wrap) { + pci_disable_device(pdev); + return -ENOMEM; + } + } + + res = wrap->dev_res; + + if (pdev->devfn == PCI_DEV_FN_HOST_DEVICE) { + /* function 0: host(BAR_0) + device(BAR_1).*/ + dev_dbg(&pdev->dev, "Initialize Device resources\n"); + res[RES_DEV_ID].start = pci_resource_start(pdev, PCI_BAR_DEV); + res[RES_DEV_ID].end = pci_resource_end(pdev, PCI_BAR_DEV); + res[RES_DEV_ID].name = "dev"; + res[RES_DEV_ID].flags = IORESOURCE_MEM; + dev_dbg(&pdev->dev, "USBSS-DEV physical base addr: %pa\n", + &res[RES_DEV_ID].start); + + res[RES_HOST_ID].start = pci_resource_start(pdev, PCI_BAR_HOST); + res[RES_HOST_ID].end = pci_resource_end(pdev, PCI_BAR_HOST); + res[RES_HOST_ID].name = "xhci"; + res[RES_HOST_ID].flags = IORESOURCE_MEM; + dev_dbg(&pdev->dev, "USBSS-XHCI physical base addr: %pa\n", + &res[RES_HOST_ID].start); + + /* Interrupt for XHCI */ + wrap->dev_res[RES_IRQ_HOST_ID].start = pdev->irq; + wrap->dev_res[RES_IRQ_HOST_ID].name = "host"; + wrap->dev_res[RES_IRQ_HOST_ID].flags = IORESOURCE_IRQ; + + /* Interrupt device. It's the same as for HOST. */ + wrap->dev_res[RES_IRQ_PERIPHERAL_ID].start = pdev->irq; + wrap->dev_res[RES_IRQ_PERIPHERAL_ID].name = "peripheral"; + wrap->dev_res[RES_IRQ_PERIPHERAL_ID].flags = IORESOURCE_IRQ; + } else { + res[RES_DRD_ID].start = pci_resource_start(pdev, PCI_BAR_OTG); + res[RES_DRD_ID].end = pci_resource_end(pdev, PCI_BAR_OTG); + res[RES_DRD_ID].name = "otg"; + res[RES_DRD_ID].flags = IORESOURCE_MEM; + dev_dbg(&pdev->dev, "USBSS-DRD physical base addr: %pa\n", + &res[RES_DRD_ID].start); + + /* Interrupt for OTG/DRD. */ + wrap->dev_res[RES_IRQ_OTG_ID].start = pdev->irq; + wrap->dev_res[RES_IRQ_OTG_ID].name = "otg"; + wrap->dev_res[RES_IRQ_OTG_ID].flags = IORESOURCE_IRQ; + } + + if (pci_is_enabled(func)) { + /* set up platform device info */ + memset(&plat_info, 0, sizeof(plat_info)); + plat_info.parent = &pdev->dev; + plat_info.fwnode = pdev->dev.fwnode; + plat_info.name = PLAT_DRIVER_NAME; + plat_info.id = pdev->devfn; + wrap->devfn = pdev->devfn; + plat_info.res = wrap->dev_res; + plat_info.num_res = ARRAY_SIZE(wrap->dev_res); + plat_info.dma_mask = pdev->dma_mask; + /* register platform device */ + wrap->plat_dev = platform_device_register_full(&plat_info); + if (IS_ERR(wrap->plat_dev)) { + pci_disable_device(pdev); + kfree(wrap); + return PTR_ERR(wrap->plat_dev); + } + } + + pci_set_drvdata(pdev, wrap); + return err; +} + +static void cdns3_pci_remove(struct pci_dev *pdev) +{ + struct cdns3_wrap *wrap; + struct pci_dev *func; + + func = cdns3_get_second_fun(pdev); + + wrap = (struct cdns3_wrap *)pci_get_drvdata(pdev); + if (wrap->devfn == pdev->devfn) + platform_device_unregister(wrap->plat_dev); + + if (!pci_is_enabled(func)) + kfree(wrap); +} + +static const struct pci_device_id cdns3_pci_ids[] = { + { PCI_DEVICE(CDNS_VENDOR_ID, CDNS_DEVICE_ID), }, + { 0, } +}; + +static struct pci_driver cdns3_pci_driver = { + .name = PCI_DRIVER_NAME, + .id_table = cdns3_pci_ids, + .probe = cdns3_pci_probe, + .remove = cdns3_pci_remove, +}; + +module_pci_driver(cdns3_pci_driver); +MODULE_DEVICE_TABLE(pci, cdns3_pci_ids); + +MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Cadence USBSS PCI wrapperr"); diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c new file mode 100644 index 000000000000..06f1e105be4e --- /dev/null +++ b/drivers/usb/cdns3/core.c @@ -0,0 +1,651 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Driver. + * + * Copyright (C) 2018-2019 Cadence. + * Copyright (C) 2017-2018 NXP + * Copyright (C) 2019 Texas Instruments + * + * Author: Peter Chen <peter.chen@nxp.com> + * Pawel Laszczak <pawell@cadence.com> + * Roger Quadros <rogerq@ti.com> + */ + +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> + +#include "gadget.h" +#include "core.h" +#include "host-export.h" +#include "gadget-export.h" +#include "drd.h" + +static int cdns3_idle_init(struct cdns3 *cdns); + +static inline +struct cdns3_role_driver *cdns3_get_current_role_driver(struct cdns3 *cdns) +{ + WARN_ON(!cdns->roles[cdns->role]); + return cdns->roles[cdns->role]; +} + +static int cdns3_role_start(struct cdns3 *cdns, enum usb_role role) +{ + int ret; + + if (WARN_ON(role > USB_ROLE_DEVICE)) + return 0; + + mutex_lock(&cdns->mutex); + cdns->role = role; + mutex_unlock(&cdns->mutex); + + if (!cdns->roles[role]) + return -ENXIO; + + if (cdns->roles[role]->state == CDNS3_ROLE_STATE_ACTIVE) + return 0; + + mutex_lock(&cdns->mutex); + ret = cdns->roles[role]->start(cdns); + if (!ret) + cdns->roles[role]->state = CDNS3_ROLE_STATE_ACTIVE; + mutex_unlock(&cdns->mutex); + + return ret; +} + +static void cdns3_role_stop(struct cdns3 *cdns) +{ + enum usb_role role = cdns->role; + + if (WARN_ON(role > USB_ROLE_DEVICE)) + return; + + if (cdns->roles[role]->state == CDNS3_ROLE_STATE_INACTIVE) + return; + + mutex_lock(&cdns->mutex); + cdns->roles[role]->stop(cdns); + cdns->roles[role]->state = CDNS3_ROLE_STATE_INACTIVE; + mutex_unlock(&cdns->mutex); +} + +static void cdns3_exit_roles(struct cdns3 *cdns) +{ + cdns3_role_stop(cdns); + cdns3_drd_exit(cdns); +} + +static enum usb_role cdsn3_hw_role_state_machine(struct cdns3 *cdns); + +/** + * cdns3_core_init_role - initialize role of operation + * @cdns: Pointer to cdns3 structure + * + * Returns 0 on success otherwise negative errno + */ +static int cdns3_core_init_role(struct cdns3 *cdns) +{ + struct device *dev = cdns->dev; + enum usb_dr_mode best_dr_mode; + enum usb_dr_mode dr_mode; + int ret = 0; + + dr_mode = usb_get_dr_mode(dev); + cdns->role = USB_ROLE_NONE; + + /* + * If driver can't read mode by means of usb_get_dr_mode function then + * chooses mode according with Kernel configuration. This setting + * can be restricted later depending on strap pin configuration. + */ + if (dr_mode == USB_DR_MODE_UNKNOWN) { + if (IS_ENABLED(CONFIG_USB_CDNS3_HOST) && + IS_ENABLED(CONFIG_USB_CDNS3_GADGET)) + dr_mode = USB_DR_MODE_OTG; + else if (IS_ENABLED(CONFIG_USB_CDNS3_HOST)) + dr_mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_CDNS3_GADGET)) + dr_mode = USB_DR_MODE_PERIPHERAL; + } + + /* + * At this point cdns->dr_mode contains strap configuration. + * Driver try update this setting considering kernel configuration + */ + best_dr_mode = cdns->dr_mode; + + ret = cdns3_idle_init(cdns); + if (ret) + return ret; + + if (dr_mode == USB_DR_MODE_OTG) { + best_dr_mode = cdns->dr_mode; + } else if (cdns->dr_mode == USB_DR_MODE_OTG) { + best_dr_mode = dr_mode; + } else if (cdns->dr_mode != dr_mode) { + dev_err(dev, "Incorrect DRD configuration\n"); + return -EINVAL; + } + + dr_mode = best_dr_mode; + + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { + ret = cdns3_host_init(cdns); + if (ret) { + dev_err(dev, "Host initialization failed with %d\n", + ret); + goto err; + } + } + + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { + ret = cdns3_gadget_init(cdns); + if (ret) { + dev_err(dev, "Device initialization failed with %d\n", + ret); + goto err; + } + } + + cdns->dr_mode = dr_mode; + + ret = cdns3_drd_update_mode(cdns); + if (ret) + goto err; + + if (cdns->dr_mode != USB_DR_MODE_OTG) { + ret = cdns3_hw_role_switch(cdns); + if (ret) + goto err; + } + + return ret; +err: + cdns3_exit_roles(cdns); + return ret; +} + +/** + * cdsn3_hw_role_state_machine - role switch state machine based on hw events. + * @cdns: Pointer to controller structure. + * + * Returns next role to be entered based on hw events. + */ +static enum usb_role cdsn3_hw_role_state_machine(struct cdns3 *cdns) +{ + enum usb_role role; + int id, vbus; + + if (cdns->dr_mode != USB_DR_MODE_OTG) + goto not_otg; + + id = cdns3_get_id(cdns); + vbus = cdns3_get_vbus(cdns); + + /* + * Role change state machine + * Inputs: ID, VBUS + * Previous state: cdns->role + * Next state: role + */ + role = cdns->role; + + switch (role) { + case USB_ROLE_NONE: + /* + * Driver treats USB_ROLE_NONE synonymous to IDLE state from + * controller specification. + */ + if (!id) + role = USB_ROLE_HOST; + else if (vbus) + role = USB_ROLE_DEVICE; + break; + case USB_ROLE_HOST: /* from HOST, we can only change to NONE */ + if (id) + role = USB_ROLE_NONE; + break; + case USB_ROLE_DEVICE: /* from GADGET, we can only change to NONE*/ + if (!vbus) + role = USB_ROLE_NONE; + break; + } + + dev_dbg(cdns->dev, "role %d -> %d\n", cdns->role, role); + + return role; + +not_otg: + if (cdns3_is_host(cdns)) + role = USB_ROLE_HOST; + if (cdns3_is_device(cdns)) + role = USB_ROLE_DEVICE; + + return role; +} + +static int cdns3_idle_role_start(struct cdns3 *cdns) +{ + return 0; +} + +static void cdns3_idle_role_stop(struct cdns3 *cdns) +{ + /* Program Lane swap and bring PHY out of RESET */ + phy_reset(cdns->usb3_phy); +} + +static int cdns3_idle_init(struct cdns3 *cdns) +{ + struct cdns3_role_driver *rdrv; + + rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL); + if (!rdrv) + return -ENOMEM; + + rdrv->start = cdns3_idle_role_start; + rdrv->stop = cdns3_idle_role_stop; + rdrv->state = CDNS3_ROLE_STATE_INACTIVE; + rdrv->suspend = NULL; + rdrv->resume = NULL; + rdrv->name = "idle"; + + cdns->roles[USB_ROLE_NONE] = rdrv; + + return 0; +} + +/** + * cdns3_hw_role_switch - switch roles based on HW state + * @cdns3: controller + */ +int cdns3_hw_role_switch(struct cdns3 *cdns) +{ + enum usb_role real_role, current_role; + int ret = 0; + + /* Do nothing if role based on syfs. */ + if (cdns->role_override) + return 0; + + pm_runtime_get_sync(cdns->dev); + + current_role = cdns->role; + real_role = cdsn3_hw_role_state_machine(cdns); + + /* Do nothing if nothing changed */ + if (current_role == real_role) + goto exit; + + cdns3_role_stop(cdns); + + dev_dbg(cdns->dev, "Switching role %d -> %d", current_role, real_role); + + ret = cdns3_role_start(cdns, real_role); + if (ret) { + /* Back to current role */ + dev_err(cdns->dev, "set %d has failed, back to %d\n", + real_role, current_role); + ret = cdns3_role_start(cdns, current_role); + if (ret) + dev_err(cdns->dev, "back to %d failed too\n", + current_role); + } +exit: + pm_runtime_put_sync(cdns->dev); + return ret; +} + +/** + * cdsn3_role_get - get current role of controller. + * + * @dev: Pointer to device structure + * + * Returns role + */ +static enum usb_role cdns3_role_get(struct device *dev) +{ + struct cdns3 *cdns = dev_get_drvdata(dev); + + return cdns->role; +} + +/** + * cdns3_role_set - set current role of controller. + * + * @dev: pointer to device object + * @role - the previous role + * Handles below events: + * - Role switch for dual-role devices + * - USB_ROLE_GADGET <--> USB_ROLE_NONE for peripheral-only devices + */ +static int cdns3_role_set(struct device *dev, enum usb_role role) +{ + struct cdns3 *cdns = dev_get_drvdata(dev); + int ret = 0; + + pm_runtime_get_sync(cdns->dev); + + /* + * FIXME: switch role framework should be extended to meet + * requirements. Driver assumes that role can be controlled + * by SW or HW. Temporary workaround is to use USB_ROLE_NONE to + * switch from SW to HW control. + * + * For dr_mode == USB_DR_MODE_OTG: + * if user sets USB_ROLE_HOST or USB_ROLE_DEVICE then driver + * sets role_override flag and forces that role. + * if user sets USB_ROLE_NONE, driver clears role_override and lets + * HW state machine take over. + * + * For dr_mode != USB_DR_MODE_OTG: + * Assumptions: + * 1. Restricted user control between NONE and dr_mode. + * 2. Driver doesn't need to rely on role_override flag. + * 3. Driver needs to ensure that HW state machine is never called + * if dr_mode != USB_DR_MODE_OTG. + */ + if (role == USB_ROLE_NONE) + cdns->role_override = 0; + else + cdns->role_override = 1; + + /* + * HW state might have changed so driver need to trigger + * HW state machine if dr_mode == USB_DR_MODE_OTG. + */ + if (!cdns->role_override && cdns->dr_mode == USB_DR_MODE_OTG) { + cdns3_hw_role_switch(cdns); + goto pm_put; + } + + if (cdns->role == role) + goto pm_put; + + if (cdns->dr_mode == USB_DR_MODE_HOST) { + switch (role) { + case USB_ROLE_NONE: + case USB_ROLE_HOST: + break; + default: + ret = -EPERM; + goto pm_put; + } + } + + if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL) { + switch (role) { + case USB_ROLE_NONE: + case USB_ROLE_DEVICE: + break; + default: + ret = -EPERM; + goto pm_put; + } + } + + cdns3_role_stop(cdns); + ret = cdns3_role_start(cdns, role); + if (ret) { + dev_err(cdns->dev, "set role %d has failed\n", role); + ret = -EPERM; + } + +pm_put: + pm_runtime_put_sync(cdns->dev); + return ret; +} + +static const struct usb_role_switch_desc cdns3_switch_desc = { + .set = cdns3_role_set, + .get = cdns3_role_get, + .allow_userspace_control = true, +}; + +/** + * cdns3_probe - probe for cdns3 core device + * @pdev: Pointer to cdns3 core platform device + * + * Returns 0 on success otherwise negative errno + */ +static int cdns3_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct cdns3 *cdns; + void __iomem *regs; + int ret; + + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(dev, "error setting dma mask: %d\n", ret); + return -ENODEV; + } + + cdns = devm_kzalloc(dev, sizeof(*cdns), GFP_KERNEL); + if (!cdns) + return -ENOMEM; + + cdns->dev = dev; + + platform_set_drvdata(pdev, cdns); + + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "host"); + if (!res) { + dev_err(dev, "missing host IRQ\n"); + return -ENODEV; + } + + cdns->xhci_res[0] = *res; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "xhci"); + if (!res) { + dev_err(dev, "couldn't get xhci resource\n"); + return -ENXIO; + } + + cdns->xhci_res[1] = *res; + + cdns->dev_irq = platform_get_irq_byname(pdev, "peripheral"); + if (cdns->dev_irq == -EPROBE_DEFER) + return cdns->dev_irq; + + if (cdns->dev_irq < 0) + dev_err(dev, "couldn't get peripheral irq\n"); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dev"); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + cdns->dev_regs = regs; + + cdns->otg_irq = platform_get_irq_byname(pdev, "otg"); + if (cdns->otg_irq == -EPROBE_DEFER) + return cdns->otg_irq; + + if (cdns->otg_irq < 0) { + dev_err(dev, "couldn't get otg irq\n"); + return cdns->otg_irq; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otg"); + if (!res) { + dev_err(dev, "couldn't get otg resource\n"); + return -ENXIO; + } + + cdns->otg_res = *res; + + mutex_init(&cdns->mutex); + + cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy"); + if (IS_ERR(cdns->usb2_phy)) + return PTR_ERR(cdns->usb2_phy); + + ret = phy_init(cdns->usb2_phy); + if (ret) + return ret; + + cdns->usb3_phy = devm_phy_optional_get(dev, "cdns3,usb3-phy"); + if (IS_ERR(cdns->usb3_phy)) + return PTR_ERR(cdns->usb3_phy); + + ret = phy_init(cdns->usb3_phy); + if (ret) + goto err1; + + ret = phy_power_on(cdns->usb2_phy); + if (ret) + goto err2; + + ret = phy_power_on(cdns->usb3_phy); + if (ret) + goto err3; + + cdns->role_sw = usb_role_switch_register(dev, &cdns3_switch_desc); + if (IS_ERR(cdns->role_sw)) { + ret = PTR_ERR(cdns->role_sw); + dev_warn(dev, "Unable to register Role Switch\n"); + goto err4; + } + + ret = cdns3_drd_init(cdns); + if (ret) + goto err5; + + ret = cdns3_core_init_role(cdns); + if (ret) + goto err5; + + device_set_wakeup_capable(dev, true); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + /* + * The controller needs less time between bus and controller suspend, + * and we also needs a small delay to avoid frequently entering low + * power mode. + */ + pm_runtime_set_autosuspend_delay(dev, 20); + pm_runtime_mark_last_busy(dev); + pm_runtime_use_autosuspend(dev); + dev_dbg(dev, "Cadence USB3 core: probe succeed\n"); + + return 0; +err5: + cdns3_drd_exit(cdns); + usb_role_switch_unregister(cdns->role_sw); +err4: + phy_power_off(cdns->usb3_phy); + +err3: + phy_power_off(cdns->usb2_phy); +err2: + phy_exit(cdns->usb3_phy); +err1: + phy_exit(cdns->usb2_phy); + + return ret; +} + +/** + * cdns3_remove - unbind drd driver and clean up + * @pdev: Pointer to Linux platform device + * + * Returns 0 on success otherwise negative errno + */ +static int cdns3_remove(struct platform_device *pdev) +{ + struct cdns3 *cdns = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + cdns3_exit_roles(cdns); + usb_role_switch_unregister(cdns->role_sw); + phy_power_off(cdns->usb2_phy); + phy_power_off(cdns->usb3_phy); + phy_exit(cdns->usb2_phy); + phy_exit(cdns->usb3_phy); + return 0; +} + +#ifdef CONFIG_PM_SLEEP + +static int cdns3_suspend(struct device *dev) +{ + struct cdns3 *cdns = dev_get_drvdata(dev); + unsigned long flags; + + if (cdns->role == USB_ROLE_HOST) + return 0; + + if (pm_runtime_status_suspended(dev)) + pm_runtime_resume(dev); + + if (cdns->roles[cdns->role]->suspend) { + spin_lock_irqsave(&cdns->gadget_dev->lock, flags); + cdns->roles[cdns->role]->suspend(cdns, false); + spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags); + } + + return 0; +} + +static int cdns3_resume(struct device *dev) +{ + struct cdns3 *cdns = dev_get_drvdata(dev); + unsigned long flags; + + if (cdns->role == USB_ROLE_HOST) + return 0; + + if (cdns->roles[cdns->role]->resume) { + spin_lock_irqsave(&cdns->gadget_dev->lock, flags); + cdns->roles[cdns->role]->resume(cdns, false); + spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags); + } + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; +} +#endif + +static const struct dev_pm_ops cdns3_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume) +}; + +#ifdef CONFIG_OF +static const struct of_device_id of_cdns3_match[] = { + { .compatible = "cdns,usb3" }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_cdns3_match); +#endif + +static struct platform_driver cdns3_driver = { + .probe = cdns3_probe, + .remove = cdns3_remove, + .driver = { + .name = "cdns-usb3", + .of_match_table = of_match_ptr(of_cdns3_match), + .pm = &cdns3_pm_ops, + }, +}; + +module_platform_driver(cdns3_driver); + +MODULE_ALIAS("platform:cdns3"); +MODULE_AUTHOR("Pawel Laszczak <pawell@cadence.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Cadence USB3 DRD Controller Driver"); diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h new file mode 100644 index 000000000000..969eb94de204 --- /dev/null +++ b/drivers/usb/cdns3/core.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence USBSS DRD Header File. + * + * Copyright (C) 2017-2018 NXP + * Copyright (C) 2018-2019 Cadence. + * + * Authors: Peter Chen <peter.chen@nxp.com> + * Pawel Laszczak <pawell@cadence.com> + */ +#include <linux/usb/otg.h> +#include <linux/usb/role.h> + +#ifndef __LINUX_CDNS3_CORE_H +#define __LINUX_CDNS3_CORE_H + +struct cdns3; + +/** + * struct cdns3_role_driver - host/gadget role driver + * @start: start this role + * @stop: stop this role + * @suspend: suspend callback for this role + * @resume: resume callback for this role + * @irq: irq handler for this role + * @name: role name string (host/gadget) + * @state: current state + */ +struct cdns3_role_driver { + int (*start)(struct cdns3 *cdns); + void (*stop)(struct cdns3 *cdns); + int (*suspend)(struct cdns3 *cdns, bool do_wakeup); + int (*resume)(struct cdns3 *cdns, bool hibernated); + const char *name; +#define CDNS3_ROLE_STATE_INACTIVE 0 +#define CDNS3_ROLE_STATE_ACTIVE 1 + int state; +}; + +#define CDNS3_XHCI_RESOURCES_NUM 2 +/** + * struct cdns3 - Representation of Cadence USB3 DRD controller. + * @dev: pointer to Cadence device struct + * @xhci_regs: pointer to base of xhci registers + * @xhci_res: the resource for xhci + * @dev_regs: pointer to base of dev registers + * @otg_res: the resource for otg + * @otg_v0_regs: pointer to base of v0 otg registers + * @otg_v1_regs: pointer to base of v1 otg registers + * @otg_regs: pointer to base of otg registers + * @otg_irq: irq number for otg controller + * @dev_irq: irq number for device controller + * @roles: array of supported roles for this controller + * @role: current role + * @host_dev: the child host device pointer for cdns3 core + * @gadget_dev: the child gadget device pointer for cdns3 core + * @usb2_phy: pointer to USB2 PHY + * @usb3_phy: pointer to USB3 PHY + * @mutex: the mutex for concurrent code at driver + * @dr_mode: supported mode of operation it can be only Host, only Device + * or OTG mode that allow to switch between Device and Host mode. + * This field based on firmware setting, kernel configuration + * and hardware configuration. + * @role_sw: pointer to role switch object. + * @role_override: set 1 if role rely on SW. + */ +struct cdns3 { + struct device *dev; + void __iomem *xhci_regs; + struct resource xhci_res[CDNS3_XHCI_RESOURCES_NUM]; + struct cdns3_usb_regs __iomem *dev_regs; + + struct resource otg_res; + struct cdns3_otg_legacy_regs *otg_v0_regs; + struct cdns3_otg_regs *otg_v1_regs; + struct cdns3_otg_common_regs *otg_regs; +#define CDNS3_CONTROLLER_V0 0 +#define CDNS3_CONTROLLER_V1 1 + u32 version; + + int otg_irq; + int dev_irq; + struct cdns3_role_driver *roles[USB_ROLE_DEVICE + 1]; + enum usb_role role; + struct platform_device *host_dev; + struct cdns3_device *gadget_dev; + struct phy *usb2_phy; + struct phy *usb3_phy; + /* mutext used in workqueue*/ + struct mutex mutex; + enum usb_dr_mode dr_mode; + struct usb_role_switch *role_sw; + int role_override; +}; + +int cdns3_hw_role_switch(struct cdns3 *cdns); + +#endif /* __LINUX_CDNS3_CORE_H */ diff --git a/drivers/usb/cdns3/debug.h b/drivers/usb/cdns3/debug.h new file mode 100644 index 000000000000..2c9afbfe988b --- /dev/null +++ b/drivers/usb/cdns3/debug.h @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence USBSS DRD Driver. + * Debug header file. + * + * Copyright (C) 2018-2019 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ +#ifndef __LINUX_CDNS3_DEBUG +#define __LINUX_CDNS3_DEBUG + +#include "core.h" + +static inline char *cdns3_decode_usb_irq(char *str, + enum usb_device_speed speed, + u32 usb_ists) +{ + int ret; + + ret = sprintf(str, "IRQ %08x = ", usb_ists); + + if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) { + ret += sprintf(str + ret, "Connection %s\n", + usb_speed_string(speed)); + } + if (usb_ists & USB_ISTS_DIS2I || usb_ists & USB_ISTS_DISI) + ret += sprintf(str + ret, "Disconnection "); + if (usb_ists & USB_ISTS_L2ENTI) + ret += sprintf(str + ret, "suspended "); + if (usb_ists & USB_ISTS_L1ENTI) + ret += sprintf(str + ret, "L1 enter "); + if (usb_ists & USB_ISTS_L1EXTI) + ret += sprintf(str + ret, "L1 exit "); + if (usb_ists & USB_ISTS_L2ENTI) + ret += sprintf(str + ret, "L2 enter "); + if (usb_ists & USB_ISTS_L2EXTI) + ret += sprintf(str + ret, "L2 exit "); + if (usb_ists & USB_ISTS_U3EXTI) + ret += sprintf(str + ret, "U3 exit "); + if (usb_ists & USB_ISTS_UWRESI) + ret += sprintf(str + ret, "Warm Reset "); + if (usb_ists & USB_ISTS_UHRESI) + ret += sprintf(str + ret, "Hot Reset "); + if (usb_ists & USB_ISTS_U2RESI) + ret += sprintf(str + ret, "Reset"); + + return str; +} + +static inline char *cdns3_decode_ep_irq(char *str, + u32 ep_sts, + const char *ep_name) +{ + int ret; + + ret = sprintf(str, "IRQ for %s: %08x ", ep_name, ep_sts); + + if (ep_sts & EP_STS_SETUP) + ret += sprintf(str + ret, "SETUP "); + if (ep_sts & EP_STS_IOC) + ret += sprintf(str + ret, "IOC "); + if (ep_sts & EP_STS_ISP) + ret += sprintf(str + ret, "ISP "); + if (ep_sts & EP_STS_DESCMIS) + ret += sprintf(str + ret, "DESCMIS "); + if (ep_sts & EP_STS_STREAMR) + ret += sprintf(str + ret, "STREAMR "); + if (ep_sts & EP_STS_MD_EXIT) + ret += sprintf(str + ret, "MD_EXIT "); + if (ep_sts & EP_STS_TRBERR) + ret += sprintf(str + ret, "TRBERR "); + if (ep_sts & EP_STS_NRDY) + ret += sprintf(str + ret, "NRDY "); + if (ep_sts & EP_STS_PRIME) + ret += sprintf(str + ret, "PRIME "); + if (ep_sts & EP_STS_SIDERR) + ret += sprintf(str + ret, "SIDERRT "); + if (ep_sts & EP_STS_OUTSMM) + ret += sprintf(str + ret, "OUTSMM "); + if (ep_sts & EP_STS_ISOERR) + ret += sprintf(str + ret, "ISOERR "); + if (ep_sts & EP_STS_IOT) + ret += sprintf(str + ret, "IOT "); + + return str; +} + +static inline char *cdns3_decode_epx_irq(char *str, + char *ep_name, + u32 ep_sts) +{ + return cdns3_decode_ep_irq(str, ep_sts, ep_name); +} + +static inline char *cdns3_decode_ep0_irq(char *str, + int dir, + u32 ep_sts) +{ + return cdns3_decode_ep_irq(str, ep_sts, + dir ? "ep0IN" : "ep0OUT"); +} + +/** + * Debug a transfer ring. + * + * Prints out all TRBs in the endpoint ring, even those after the Link TRB. + *. + */ +static inline char *cdns3_dbg_ring(struct cdns3_endpoint *priv_ep, + struct cdns3_trb *ring, char *str) +{ + dma_addr_t addr = priv_ep->trb_pool_dma; + struct cdns3_trb *trb; + int trb_per_sector; + int ret = 0; + int i; + + trb_per_sector = GET_TRBS_PER_SEGMENT(priv_ep->type); + + trb = &priv_ep->trb_pool[priv_ep->dequeue]; + ret += sprintf(str + ret, "\n\t\tRing contents for %s:", priv_ep->name); + + ret += sprintf(str + ret, + "\n\t\tRing deq index: %d, trb: %p (virt), 0x%llx (dma)\n", + priv_ep->dequeue, trb, + (unsigned long long)cdns3_trb_virt_to_dma(priv_ep, trb)); + + trb = &priv_ep->trb_pool[priv_ep->enqueue]; + ret += sprintf(str + ret, + "\t\tRing enq index: %d, trb: %p (virt), 0x%llx (dma)\n", + priv_ep->enqueue, trb, + (unsigned long long)cdns3_trb_virt_to_dma(priv_ep, trb)); + + ret += sprintf(str + ret, + "\t\tfree trbs: %d, CCS=%d, PCS=%d\n", + priv_ep->free_trbs, priv_ep->ccs, priv_ep->pcs); + + if (trb_per_sector > TRBS_PER_SEGMENT) + trb_per_sector = TRBS_PER_SEGMENT; + + if (trb_per_sector > TRBS_PER_SEGMENT) { + sprintf(str + ret, "\t\tTo big transfer ring %d\n", + trb_per_sector); + return str; + } + + for (i = 0; i < trb_per_sector; ++i) { + trb = &ring[i]; + ret += sprintf(str + ret, + "\t\t@%pad %08x %08x %08x\n", &addr, + le32_to_cpu(trb->buffer), + le32_to_cpu(trb->length), + le32_to_cpu(trb->control)); + addr += sizeof(*trb); + } + + return str; +} + +#endif /*__LINUX_CDNS3_DEBUG*/ diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c new file mode 100644 index 000000000000..16ad485f0b69 --- /dev/null +++ b/drivers/usb/cdns3/drd.c @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Driver. + * + * Copyright (C) 2018-2019 Cadence. + * Copyright (C) 2019 Texas Instruments + * + * Author: Pawel Laszczak <pawell@cadence.com> + * Roger Quadros <rogerq@ti.com> + * + * + */ +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/iopoll.h> +#include <linux/usb/otg.h> + +#include "gadget.h" +#include "drd.h" +#include "core.h" + +/** + * cdns3_set_mode - change mode of OTG Core + * @cdns: pointer to context structure + * @mode: selected mode from cdns_role + * + * Returns 0 on success otherwise negative errno + */ +int cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode) +{ + int ret = 0; + u32 reg; + + switch (mode) { + case USB_DR_MODE_PERIPHERAL: + break; + case USB_DR_MODE_HOST: + break; + case USB_DR_MODE_OTG: + dev_dbg(cdns->dev, "Set controller to OTG mode\n"); + if (cdns->version == CDNS3_CONTROLLER_V1) { + reg = readl(&cdns->otg_v1_regs->override); + reg |= OVERRIDE_IDPULLUP; + writel(reg, &cdns->otg_v1_regs->override); + } else { + reg = readl(&cdns->otg_v0_regs->ctrl1); + reg |= OVERRIDE_IDPULLUP_V0; + writel(reg, &cdns->otg_v0_regs->ctrl1); + } + + /* + * Hardware specification says: "ID_VALUE must be valid within + * 50ms after idpullup is set to '1" so driver must wait + * 50ms before reading this pin. + */ + usleep_range(50000, 60000); + break; + default: + dev_err(cdns->dev, "Unsupported mode of operation %d\n", mode); + return -EINVAL; + } + + return ret; +} + +int cdns3_get_id(struct cdns3 *cdns) +{ + int id; + + id = readl(&cdns->otg_regs->sts) & OTGSTS_ID_VALUE; + dev_dbg(cdns->dev, "OTG ID: %d", id); + + return id; +} + +int cdns3_get_vbus(struct cdns3 *cdns) +{ + int vbus; + + vbus = !!(readl(&cdns->otg_regs->sts) & OTGSTS_VBUS_VALID); + dev_dbg(cdns->dev, "OTG VBUS: %d", vbus); + + return vbus; +} + +int cdns3_is_host(struct cdns3 *cdns) +{ + if (cdns->dr_mode == USB_DR_MODE_HOST) + return 1; + else if (!cdns3_get_id(cdns)) + return 1; + + return 0; +} + +int cdns3_is_device(struct cdns3 *cdns) +{ + if (cdns->dr_mode == USB_DR_MODE_PERIPHERAL) + return 1; + else if (cdns->dr_mode == USB_DR_MODE_OTG) + if (cdns3_get_id(cdns)) + return 1; + + return 0; +} + +/** + * cdns3_otg_disable_irq - Disable all OTG interrupts + * @cdns: Pointer to controller context structure + */ +static void cdns3_otg_disable_irq(struct cdns3 *cdns) +{ + writel(0, &cdns->otg_regs->ien); +} + +/** + * cdns3_otg_enable_irq - enable id and sess_valid interrupts + * @cdns: Pointer to controller context structure + */ +static void cdns3_otg_enable_irq(struct cdns3 *cdns) +{ + writel(OTGIEN_ID_CHANGE_INT | OTGIEN_VBUSVALID_RISE_INT | + OTGIEN_VBUSVALID_FALL_INT, &cdns->otg_regs->ien); +} + +/** + * cdns3_drd_switch_host - start/stop host + * @cdns: Pointer to controller context structure + * @on: 1 for start, 0 for stop + * + * Returns 0 on success otherwise negative errno + */ +int cdns3_drd_switch_host(struct cdns3 *cdns, int on) +{ + int ret, val; + u32 reg = OTGCMD_OTG_DIS; + + /* switch OTG core */ + if (on) { + writel(OTGCMD_HOST_BUS_REQ | reg, &cdns->otg_regs->cmd); + + dev_dbg(cdns->dev, "Waiting till Host mode is turned on\n"); + ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val, + val & OTGSTS_XHCI_READY, + 1, 100000); + if (ret) { + dev_err(cdns->dev, "timeout waiting for xhci_ready\n"); + return ret; + } + } else { + writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP | + OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF, + &cdns->otg_regs->cmd); + /* Waiting till H_IDLE state.*/ + readl_poll_timeout_atomic(&cdns->otg_regs->state, val, + !(val & OTGSTATE_HOST_STATE_MASK), + 1, 2000000); + } + + return 0; +} + +/** + * cdns3_drd_switch_gadget - start/stop gadget + * @cdns: Pointer to controller context structure + * @on: 1 for start, 0 for stop + * + * Returns 0 on success otherwise negative errno + */ +int cdns3_drd_switch_gadget(struct cdns3 *cdns, int on) +{ + int ret, val; + u32 reg = OTGCMD_OTG_DIS; + + /* switch OTG core */ + if (on) { + writel(OTGCMD_DEV_BUS_REQ | reg, &cdns->otg_regs->cmd); + + dev_dbg(cdns->dev, "Waiting till Device mode is turned on\n"); + + ret = readl_poll_timeout_atomic(&cdns->otg_regs->sts, val, + val & OTGSTS_DEV_READY, + 1, 100000); + if (ret) { + dev_err(cdns->dev, "timeout waiting for dev_ready\n"); + return ret; + } + } else { + /* + * driver should wait at least 10us after disabling Device + * before turning-off Device (DEV_BUS_DROP) + */ + usleep_range(20, 30); + writel(OTGCMD_HOST_BUS_DROP | OTGCMD_DEV_BUS_DROP | + OTGCMD_DEV_POWER_OFF | OTGCMD_HOST_POWER_OFF, + &cdns->otg_regs->cmd); + /* Waiting till DEV_IDLE state.*/ + readl_poll_timeout_atomic(&cdns->otg_regs->state, val, + !(val & OTGSTATE_DEV_STATE_MASK), + 1, 2000000); + } + + return 0; +} + +/** + * cdns3_init_otg_mode - initialize drd controller + * @cdns: Pointer to controller context structure + * + * Returns 0 on success otherwise negative errno + */ +static int cdns3_init_otg_mode(struct cdns3 *cdns) +{ + int ret = 0; + + cdns3_otg_disable_irq(cdns); + /* clear all interrupts */ + writel(~0, &cdns->otg_regs->ivect); + + ret = cdns3_set_mode(cdns, USB_DR_MODE_OTG); + if (ret) + return ret; + + cdns3_otg_enable_irq(cdns); + return ret; +} + +/** + * cdns3_drd_update_mode - initialize mode of operation + * @cdns: Pointer to controller context structure + * + * Returns 0 on success otherwise negative errno + */ +int cdns3_drd_update_mode(struct cdns3 *cdns) +{ + int ret = 0; + + switch (cdns->dr_mode) { + case USB_DR_MODE_PERIPHERAL: + ret = cdns3_set_mode(cdns, USB_DR_MODE_PERIPHERAL); + break; + case USB_DR_MODE_HOST: + ret = cdns3_set_mode(cdns, USB_DR_MODE_HOST); + break; + case USB_DR_MODE_OTG: + ret = cdns3_init_otg_mode(cdns); + break; + default: + dev_err(cdns->dev, "Unsupported mode of operation %d\n", + cdns->dr_mode); + return -EINVAL; + } + + return ret; +} + +static irqreturn_t cdns3_drd_thread_irq(int irq, void *data) +{ + struct cdns3 *cdns = data; + + cdns3_hw_role_switch(cdns); + + return IRQ_HANDLED; +} + +/** + * cdns3_drd_irq - interrupt handler for OTG events + * + * @irq: irq number for cdns3 core device + * @data: structure of cdns3 + * + * Returns IRQ_HANDLED or IRQ_NONE + */ +static irqreturn_t cdns3_drd_irq(int irq, void *data) +{ + irqreturn_t ret = IRQ_NONE; + struct cdns3 *cdns = data; + u32 reg; + + if (cdns->dr_mode != USB_DR_MODE_OTG) + return ret; + + reg = readl(&cdns->otg_regs->ivect); + + if (!reg) + return ret; + + if (reg & OTGIEN_ID_CHANGE_INT) { + dev_dbg(cdns->dev, "OTG IRQ: new ID: %d\n", + cdns3_get_id(cdns)); + + ret = IRQ_WAKE_THREAD; + } + + if (reg & (OTGIEN_VBUSVALID_RISE_INT | OTGIEN_VBUSVALID_FALL_INT)) { + dev_dbg(cdns->dev, "OTG IRQ: new VBUS: %d\n", + cdns3_get_vbus(cdns)); + + ret = IRQ_WAKE_THREAD; + } + + writel(~0, &cdns->otg_regs->ivect); + return ret; +} + +int cdns3_drd_init(struct cdns3 *cdns) +{ + void __iomem *regs; + int ret = 0; + u32 state; + + regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + /* Detection of DRD version. Controller has been released + * in two versions. Both are similar, but they have same changes + * in register maps. + * The first register in old version is command register and it's read + * only, so driver should read 0 from it. On the other hand, in v1 + * the first register contains device ID number which is not set to 0. + * Driver uses this fact to detect the proper version of + * controller. + */ + cdns->otg_v0_regs = regs; + if (!readl(&cdns->otg_v0_regs->cmd)) { + cdns->version = CDNS3_CONTROLLER_V0; + cdns->otg_v1_regs = NULL; + cdns->otg_regs = regs; + writel(1, &cdns->otg_v0_regs->simulate); + dev_info(cdns->dev, "DRD version v0 (%08x)\n", + readl(&cdns->otg_v0_regs->version)); + } else { + cdns->otg_v0_regs = NULL; + cdns->otg_v1_regs = regs; + cdns->otg_regs = (void *)&cdns->otg_v1_regs->cmd; + cdns->version = CDNS3_CONTROLLER_V1; + writel(1, &cdns->otg_v1_regs->simulate); + dev_info(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n", + readl(&cdns->otg_v1_regs->did), + readl(&cdns->otg_v1_regs->rid)); + } + + state = OTGSTS_STRAP(readl(&cdns->otg_regs->sts)); + + /* Update dr_mode according to STRAP configuration. */ + cdns->dr_mode = USB_DR_MODE_OTG; + if (state == OTGSTS_STRAP_HOST) { + dev_dbg(cdns->dev, "Controller strapped to HOST\n"); + cdns->dr_mode = USB_DR_MODE_HOST; + } else if (state == OTGSTS_STRAP_GADGET) { + dev_dbg(cdns->dev, "Controller strapped to PERIPHERAL\n"); + cdns->dr_mode = USB_DR_MODE_PERIPHERAL; + } + + ret = devm_request_threaded_irq(cdns->dev, cdns->otg_irq, + cdns3_drd_irq, + cdns3_drd_thread_irq, + IRQF_SHARED, + dev_name(cdns->dev), cdns); + + if (ret) { + dev_err(cdns->dev, "couldn't get otg_irq\n"); + return ret; + } + + state = readl(&cdns->otg_regs->sts); + if (OTGSTS_OTG_NRDY(state) != 0) { + dev_err(cdns->dev, "Cadence USB3 OTG device not ready\n"); + return -ENODEV; + } + + return ret; +} + +int cdns3_drd_exit(struct cdns3 *cdns) +{ + cdns3_otg_disable_irq(cdns); + return 0; +} diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h new file mode 100644 index 000000000000..04e01c4d2377 --- /dev/null +++ b/drivers/usb/cdns3/drd.h @@ -0,0 +1,167 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence USB3 DRD header file. + * + * Copyright (C) 2018-2019 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ +#ifndef __LINUX_CDNS3_DRD +#define __LINUX_CDNS3_DRD + +#include <linux/usb/otg.h> +#include <linux/phy/phy.h> +#include "core.h" + +/* DRD register interface for version v1. */ +struct cdns3_otg_regs { + __le32 did; + __le32 rid; + __le32 capabilities; + __le32 reserved1; + __le32 cmd; + __le32 sts; + __le32 state; + __le32 reserved2; + __le32 ien; + __le32 ivect; + __le32 refclk; + __le32 tmr; + __le32 reserved3[4]; + __le32 simulate; + __le32 override; + __le32 susp_ctrl; + __le32 reserved4; + __le32 anasts; + __le32 adp_ramp_time; + __le32 ctrl1; + __le32 ctrl2; +}; + +/* DRD register interface for version v0. */ +struct cdns3_otg_legacy_regs { + __le32 cmd; + __le32 sts; + __le32 state; + __le32 refclk; + __le32 ien; + __le32 ivect; + __le32 reserved1[3]; + __le32 tmr; + __le32 reserved2[2]; + __le32 version; + __le32 capabilities; + __le32 reserved3[2]; + __le32 simulate; + __le32 reserved4[5]; + __le32 ctrl1; +}; + +/* + * Common registers interface for both version of DRD. + */ +struct cdns3_otg_common_regs { + __le32 cmd; + __le32 sts; + __le32 state; + __le32 different1; + __le32 ien; + __le32 ivect; +}; + +/* CDNS_RID - bitmasks */ +#define CDNS_RID(p) ((p) & GENMASK(15, 0)) + +/* CDNS_VID - bitmasks */ +#define CDNS_DID(p) ((p) & GENMASK(31, 0)) + +/* OTGCMD - bitmasks */ +/* "Request the bus for Device mode. */ +#define OTGCMD_DEV_BUS_REQ BIT(0) +/* Request the bus for Host mode */ +#define OTGCMD_HOST_BUS_REQ BIT(1) +/* Enable OTG mode. */ +#define OTGCMD_OTG_EN BIT(2) +/* Disable OTG mode */ +#define OTGCMD_OTG_DIS BIT(3) +/*"Configure OTG as A-Device. */ +#define OTGCMD_A_DEV_EN BIT(4) +/*"Configure OTG as A-Device. */ +#define OTGCMD_A_DEV_DIS BIT(5) +/* Drop the bus for Device mod e. */ +#define OTGCMD_DEV_BUS_DROP BIT(8) +/* Drop the bus for Host mode*/ +#define OTGCMD_HOST_BUS_DROP BIT(9) +/* Power Down USBSS-DEV. */ +#define OTGCMD_DEV_POWER_OFF BIT(11) +/* Power Down CDNSXHCI. */ +#define OTGCMD_HOST_POWER_OFF BIT(12) + +/* OTGIEN - bitmasks */ +/* ID change interrupt enable */ +#define OTGIEN_ID_CHANGE_INT BIT(0) +/* Vbusvalid fall detected interrupt enable.*/ +#define OTGIEN_VBUSVALID_RISE_INT BIT(4) +/* Vbusvalid fall detected interrupt enable */ +#define OTGIEN_VBUSVALID_FALL_INT BIT(5) + +/* OTGSTS - bitmasks */ +/* + * Current value of the ID pin. It is only valid when idpullup in + * OTGCTRL1_TYPE register is set to '1'. + */ +#define OTGSTS_ID_VALUE BIT(0) +/* Current value of the vbus_valid */ +#define OTGSTS_VBUS_VALID BIT(1) +/* Current value of the b_sess_vld */ +#define OTGSTS_SESSION_VALID BIT(2) +/*Device mode is active*/ +#define OTGSTS_DEV_ACTIVE BIT(3) +/* Host mode is active. */ +#define OTGSTS_HOST_ACTIVE BIT(4) +/* OTG Controller not ready. */ +#define OTGSTS_OTG_NRDY_MASK BIT(11) +#define OTGSTS_OTG_NRDY(p) ((p) & OTGSTS_OTG_NRDY_MASK) +/* + * Value of the strap pins. + * 000 - no default configuration + * 010 - Controller initiall configured as Host + * 100 - Controller initially configured as Device + */ +#define OTGSTS_STRAP(p) (((p) & GENMASK(14, 12)) >> 12) +#define OTGSTS_STRAP_NO_DEFAULT_CFG 0x00 +#define OTGSTS_STRAP_HOST_OTG 0x01 +#define OTGSTS_STRAP_HOST 0x02 +#define OTGSTS_STRAP_GADGET 0x04 +/* Host mode is turned on. */ +#define OTGSTS_XHCI_READY BIT(26) +/* "Device mode is turned on .*/ +#define OTGSTS_DEV_READY BIT(27) + +/* OTGSTATE- bitmasks */ +#define OTGSTATE_DEV_STATE_MASK GENMASK(2, 0) +#define OTGSTATE_HOST_STATE_MASK GENMASK(5, 3) +#define OTGSTATE_HOST_STATE_IDLE 0x0 +#define OTGSTATE_HOST_STATE_VBUS_FALL 0x7 +#define OTGSTATE_HOST_STATE(p) (((p) & OTGSTATE_HOST_STATE_MASK) >> 3) + +/* OTGREFCLK - bitmasks */ +#define OTGREFCLK_STB_CLK_SWITCH_EN BIT(31) + +/* OVERRIDE - bitmasks */ +#define OVERRIDE_IDPULLUP BIT(0) +/* Only for CDNS3_CONTROLLER_V0 version */ +#define OVERRIDE_IDPULLUP_V0 BIT(24) + +int cdns3_is_host(struct cdns3 *cdns); +int cdns3_is_device(struct cdns3 *cdns); +int cdns3_get_id(struct cdns3 *cdns); +int cdns3_get_vbus(struct cdns3 *cdns); +int cdns3_drd_init(struct cdns3 *cdns); +int cdns3_drd_exit(struct cdns3 *cdns); +int cdns3_drd_update_mode(struct cdns3 *cdns); +int cdns3_drd_switch_gadget(struct cdns3 *cdns, int on); +int cdns3_drd_switch_host(struct cdns3 *cdns, int on); +int cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode); + +#endif /* __LINUX_CDNS3_DRD */ diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c new file mode 100644 index 000000000000..44f652e8b5a2 --- /dev/null +++ b/drivers/usb/cdns3/ep0.c @@ -0,0 +1,886 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Driver - gadget side. + * + * Copyright (C) 2018 Cadence Design Systems. + * Copyright (C) 2017-2018 NXP + * + * Authors: Pawel Jez <pjez@cadence.com>, + * Pawel Laszczak <pawell@cadence.com> + * Peter Chen <peter.chen@nxp.com> + */ + +#include <linux/usb/composite.h> +#include <linux/iopoll.h> + +#include "gadget.h" +#include "trace.h" + +static struct usb_endpoint_descriptor cdns3_gadget_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, +}; + +/** + * cdns3_ep0_run_transfer - Do transfer on default endpoint hardware + * @priv_dev: extended gadget object + * @dma_addr: physical address where data is/will be stored + * @length: data length + * @erdy: set it to 1 when ERDY packet should be sent - + * exit from flow control state + */ +static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev, + dma_addr_t dma_addr, + unsigned int length, int erdy, int zlp) +{ + struct cdns3_usb_regs __iomem *regs = priv_dev->regs; + struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; + + priv_ep->trb_pool[0].buffer = TRB_BUFFER(dma_addr); + priv_ep->trb_pool[0].length = TRB_LEN(length); + + if (zlp) { + priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_TYPE(TRB_NORMAL); + priv_ep->trb_pool[1].buffer = TRB_BUFFER(dma_addr); + priv_ep->trb_pool[1].length = TRB_LEN(0); + priv_ep->trb_pool[1].control = TRB_CYCLE | TRB_IOC | + TRB_TYPE(TRB_NORMAL); + } else { + priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_IOC | + TRB_TYPE(TRB_NORMAL); + priv_ep->trb_pool[1].control = 0; + } + + trace_cdns3_prepare_trb(priv_ep, priv_ep->trb_pool); + + cdns3_select_ep(priv_dev, priv_dev->ep0_data_dir); + + writel(EP_STS_TRBERR, ®s->ep_sts); + writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma), ®s->ep_traddr); + trace_cdns3_doorbell_ep0(priv_dev->ep0_data_dir ? "ep0in" : "ep0out", + readl(®s->ep_traddr)); + + /* TRB should be prepared before starting transfer. */ + writel(EP_CMD_DRDY, ®s->ep_cmd); + + /* Resume controller before arming transfer. */ + __cdns3_gadget_wakeup(priv_dev); + + if (erdy) + writel(EP_CMD_ERDY, &priv_dev->regs->ep_cmd); +} + +/** + * cdns3_ep0_delegate_req - Returns status of handling setup packet + * Setup is handled by gadget driver + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns zero on success or negative value on failure + */ +static int cdns3_ep0_delegate_req(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + int ret; + + spin_unlock(&priv_dev->lock); + priv_dev->setup_pending = 1; + ret = priv_dev->gadget_driver->setup(&priv_dev->gadget, ctrl_req); + priv_dev->setup_pending = 0; + spin_lock(&priv_dev->lock); + return ret; +} + +static void cdns3_prepare_setup_packet(struct cdns3_device *priv_dev) +{ + priv_dev->ep0_data_dir = 0; + priv_dev->ep0_stage = CDNS3_SETUP_STAGE; + cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, + sizeof(struct usb_ctrlrequest), 0, 0); +} + +static void cdns3_ep0_complete_setup(struct cdns3_device *priv_dev, + u8 send_stall, u8 send_erdy) +{ + struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; + struct usb_request *request; + + request = cdns3_next_request(&priv_ep->pending_req_list); + if (request) + list_del_init(&request->list); + + if (send_stall) { + trace_cdns3_halt(priv_ep, send_stall, 0); + /* set_stall on ep0 */ + cdns3_select_ep(priv_dev, 0x00); + writel(EP_CMD_SSTALL, &priv_dev->regs->ep_cmd); + } else { + cdns3_prepare_setup_packet(priv_dev); + } + + priv_dev->ep0_stage = CDNS3_SETUP_STAGE; + writel((send_erdy ? EP_CMD_ERDY : 0) | EP_CMD_REQ_CMPL, + &priv_dev->regs->ep_cmd); + + cdns3_allow_enable_l1(priv_dev, 1); +} + +/** + * cdns3_req_ep0_set_configuration - Handling of SET_CONFIG standard USB request + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, USB_GADGET_DELAYED_STATUS on deferred status stage, + * error code on error + */ +static int cdns3_req_ep0_set_configuration(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + enum usb_device_state device_state = priv_dev->gadget.state; + struct cdns3_endpoint *priv_ep; + u32 config = le16_to_cpu(ctrl_req->wValue); + int result = 0; + int i; + + switch (device_state) { + case USB_STATE_ADDRESS: + /* Configure non-control EPs */ + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) { + priv_ep = priv_dev->eps[i]; + if (!priv_ep) + continue; + + if (priv_ep->flags & EP_CLAIMED) + cdns3_ep_config(priv_ep); + } + + result = cdns3_ep0_delegate_req(priv_dev, ctrl_req); + + if (result) + return result; + + if (config) { + cdns3_set_hw_configuration(priv_dev); + } else { + cdns3_hw_reset_eps_config(priv_dev); + usb_gadget_set_state(&priv_dev->gadget, + USB_STATE_ADDRESS); + } + break; + case USB_STATE_CONFIGURED: + result = cdns3_ep0_delegate_req(priv_dev, ctrl_req); + + if (!config && !result) { + cdns3_hw_reset_eps_config(priv_dev); + usb_gadget_set_state(&priv_dev->gadget, + USB_STATE_ADDRESS); + } + break; + default: + result = -EINVAL; + } + + return result; +} + +/** + * cdns3_req_ep0_set_address - Handling of SET_ADDRESS standard USB request + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, error code on error + */ +static int cdns3_req_ep0_set_address(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + enum usb_device_state device_state = priv_dev->gadget.state; + u32 reg; + u32 addr; + + addr = le16_to_cpu(ctrl_req->wValue); + + if (addr > USB_DEVICE_MAX_ADDRESS) { + dev_err(priv_dev->dev, + "Device address (%d) cannot be greater than %d\n", + addr, USB_DEVICE_MAX_ADDRESS); + return -EINVAL; + } + + if (device_state == USB_STATE_CONFIGURED) { + dev_err(priv_dev->dev, + "can't set_address from configured state\n"); + return -EINVAL; + } + + reg = readl(&priv_dev->regs->usb_cmd); + + writel(reg | USB_CMD_FADDR(addr) | USB_CMD_SET_ADDR, + &priv_dev->regs->usb_cmd); + + usb_gadget_set_state(&priv_dev->gadget, + (addr ? USB_STATE_ADDRESS : USB_STATE_DEFAULT)); + + return 0; +} + +/** + * cdns3_req_ep0_get_status - Handling of GET_STATUS standard USB request + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, error code on error + */ +static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl) +{ + __le16 *response_pkt; + u16 usb_status = 0; + u32 recip; + + recip = ctrl->bRequestType & USB_RECIP_MASK; + + switch (recip) { + case USB_RECIP_DEVICE: + /* self powered */ + if (priv_dev->is_selfpowered) + usb_status = BIT(USB_DEVICE_SELF_POWERED); + + if (priv_dev->wake_up_flag) + usb_status |= BIT(USB_DEVICE_REMOTE_WAKEUP); + + if (priv_dev->gadget.speed != USB_SPEED_SUPER) + break; + + if (priv_dev->u1_allowed) + usb_status |= BIT(USB_DEV_STAT_U1_ENABLED); + + if (priv_dev->u2_allowed) + usb_status |= BIT(USB_DEV_STAT_U2_ENABLED); + + break; + case USB_RECIP_INTERFACE: + return cdns3_ep0_delegate_req(priv_dev, ctrl); + case USB_RECIP_ENDPOINT: + /* check if endpoint is stalled */ + cdns3_select_ep(priv_dev, ctrl->wIndex); + if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts))) + usb_status = BIT(USB_ENDPOINT_HALT); + break; + default: + return -EINVAL; + } + + response_pkt = (__le16 *)priv_dev->setup_buf; + *response_pkt = cpu_to_le16(usb_status); + + cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, + sizeof(*response_pkt), 1, 0); + return 0; +} + +static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl, + int set) +{ + enum usb_device_state state; + enum usb_device_speed speed; + int ret = 0; + u32 wValue; + u16 tmode; + + wValue = le16_to_cpu(ctrl->wValue); + state = priv_dev->gadget.state; + speed = priv_dev->gadget.speed; + + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + priv_dev->wake_up_flag = !!set; + break; + case USB_DEVICE_U1_ENABLE: + if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER) + return -EINVAL; + + priv_dev->u1_allowed = !!set; + break; + case USB_DEVICE_U2_ENABLE: + if (state != USB_STATE_CONFIGURED || speed != USB_SPEED_SUPER) + return -EINVAL; + + priv_dev->u2_allowed = !!set; + break; + case USB_DEVICE_LTM_ENABLE: + ret = -EINVAL; + break; + case USB_DEVICE_TEST_MODE: + if (state != USB_STATE_CONFIGURED || speed > USB_SPEED_HIGH) + return -EINVAL; + + tmode = le16_to_cpu(ctrl->wIndex); + + if (!set || (tmode & 0xff) != 0) + return -EINVAL; + + switch (tmode >> 8) { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + cdns3_ep0_complete_setup(priv_dev, 0, 1); + /** + * Little delay to give the controller some time + * for sending status stage. + * This time should be less then 3ms. + */ + usleep_range(1000, 2000); + cdns3_set_register_bit(&priv_dev->regs->usb_cmd, + USB_CMD_STMODE | + USB_STS_TMODE_SEL(tmode - 1)); + break; + default: + ret = -EINVAL; + } + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int cdns3_ep0_feature_handle_intf(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl, + int set) +{ + u32 wValue; + int ret = 0; + + wValue = le16_to_cpu(ctrl->wValue); + + switch (wValue) { + case USB_INTRF_FUNC_SUSPEND: + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl, + int set) +{ + struct cdns3_endpoint *priv_ep; + int ret = 0; + u8 index; + + if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT) + return -EINVAL; + + if (!(ctrl->wIndex & ~USB_DIR_IN)) + return 0; + + index = cdns3_ep_addr_to_index(ctrl->wIndex); + priv_ep = priv_dev->eps[index]; + + cdns3_select_ep(priv_dev, ctrl->wIndex); + + if (set) + __cdns3_gadget_ep_set_halt(priv_ep); + else if (!(priv_ep->flags & EP_WEDGE)) + ret = __cdns3_gadget_ep_clear_halt(priv_ep); + + cdns3_select_ep(priv_dev, 0x00); + + return ret; +} + +/** + * cdns3_req_ep0_handle_feature - + * Handling of GET/SET_FEATURE standard USB request + * + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * @set: must be set to 1 for SET_FEATURE request + * + * Returns 0 if success, error code on error + */ +static int cdns3_req_ep0_handle_feature(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl, + int set) +{ + int ret = 0; + u32 recip; + + recip = ctrl->bRequestType & USB_RECIP_MASK; + + switch (recip) { + case USB_RECIP_DEVICE: + ret = cdns3_ep0_feature_handle_device(priv_dev, ctrl, set); + break; + case USB_RECIP_INTERFACE: + ret = cdns3_ep0_feature_handle_intf(priv_dev, ctrl, set); + break; + case USB_RECIP_ENDPOINT: + ret = cdns3_ep0_feature_handle_endpoint(priv_dev, ctrl, set); + break; + default: + return -EINVAL; + } + + return ret; +} + +/** + * cdns3_req_ep0_set_sel - Handling of SET_SEL standard USB request + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, error code on error + */ +static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + if (priv_dev->gadget.state < USB_STATE_ADDRESS) + return -EINVAL; + + if (ctrl_req->wLength != 6) { + dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n", + ctrl_req->wLength); + return -EINVAL; + } + + cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma, 6, 1, 0); + return 0; +} + +/** + * cdns3_req_ep0_set_isoch_delay - + * Handling of GET_ISOCH_DELAY standard USB request + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, error code on error + */ +static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + if (ctrl_req->wIndex || ctrl_req->wLength) + return -EINVAL; + + priv_dev->isoch_delay = ctrl_req->wValue; + + return 0; +} + +/** + * cdns3_ep0_standard_request - Handling standard USB requests + * @priv_dev: extended gadget object + * @ctrl_req: pointer to received setup packet + * + * Returns 0 if success, error code on error + */ +static int cdns3_ep0_standard_request(struct cdns3_device *priv_dev, + struct usb_ctrlrequest *ctrl_req) +{ + int ret; + + switch (ctrl_req->bRequest) { + case USB_REQ_SET_ADDRESS: + ret = cdns3_req_ep0_set_address(priv_dev, ctrl_req); + break; + case USB_REQ_SET_CONFIGURATION: + ret = cdns3_req_ep0_set_configuration(priv_dev, ctrl_req); + break; + case USB_REQ_GET_STATUS: + ret = cdns3_req_ep0_get_status(priv_dev, ctrl_req); + break; + case USB_REQ_CLEAR_FEATURE: + ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 0); + break; + case USB_REQ_SET_FEATURE: + ret = cdns3_req_ep0_handle_feature(priv_dev, ctrl_req, 1); + break; + case USB_REQ_SET_SEL: + ret = cdns3_req_ep0_set_sel(priv_dev, ctrl_req); + break; + case USB_REQ_SET_ISOCH_DELAY: + ret = cdns3_req_ep0_set_isoch_delay(priv_dev, ctrl_req); + break; + default: + ret = cdns3_ep0_delegate_req(priv_dev, ctrl_req); + break; + } + + return ret; +} + +static void __pending_setup_status_handler(struct cdns3_device *priv_dev) +{ + struct usb_request *request = priv_dev->pending_status_request; + + if (priv_dev->status_completion_no_call && request && + request->complete) { + request->complete(&priv_dev->eps[0]->endpoint, request); + priv_dev->status_completion_no_call = 0; + } +} + +void cdns3_pending_setup_status_handler(struct work_struct *work) +{ + struct cdns3_device *priv_dev = container_of(work, struct cdns3_device, + pending_status_wq); + unsigned long flags; + + spin_lock_irqsave(&priv_dev->lock, flags); + __pending_setup_status_handler(priv_dev); + spin_unlock_irqrestore(&priv_dev->lock, flags); +} + +/** + * cdns3_ep0_setup_phase - Handling setup USB requests + * @priv_dev: extended gadget object + */ +static void cdns3_ep0_setup_phase(struct cdns3_device *priv_dev) +{ + struct usb_ctrlrequest *ctrl = priv_dev->setup_buf; + struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; + int result; + + priv_dev->ep0_data_dir = ctrl->bRequestType & USB_DIR_IN; + + trace_cdns3_ctrl_req(ctrl); + + if (!list_empty(&priv_ep->pending_req_list)) { + struct usb_request *request; + + request = cdns3_next_request(&priv_ep->pending_req_list); + priv_ep->dir = priv_dev->ep0_data_dir; + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), + -ECONNRESET); + } + + if (le16_to_cpu(ctrl->wLength)) + priv_dev->ep0_stage = CDNS3_DATA_STAGE; + else + priv_dev->ep0_stage = CDNS3_STATUS_STAGE; + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + result = cdns3_ep0_standard_request(priv_dev, ctrl); + else + result = cdns3_ep0_delegate_req(priv_dev, ctrl); + + if (result == USB_GADGET_DELAYED_STATUS) + return; + + if (result < 0) + cdns3_ep0_complete_setup(priv_dev, 1, 1); + else if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) + cdns3_ep0_complete_setup(priv_dev, 0, 1); +} + +static void cdns3_transfer_completed(struct cdns3_device *priv_dev) +{ + struct cdns3_endpoint *priv_ep = priv_dev->eps[0]; + + if (!list_empty(&priv_ep->pending_req_list)) { + struct usb_request *request; + + trace_cdns3_complete_trb(priv_ep, priv_ep->trb_pool); + request = cdns3_next_request(&priv_ep->pending_req_list); + + request->actual = + TRB_LEN(le32_to_cpu(priv_ep->trb_pool->length)); + + priv_ep->dir = priv_dev->ep0_data_dir; + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), 0); + } + + cdns3_ep0_complete_setup(priv_dev, 0, 0); +} + +/** + * cdns3_check_new_setup - Check if controller receive new SETUP packet. + * @priv_dev: extended gadget object + * + * The SETUP packet can be kept in on-chip memory or in system memory. + */ +static bool cdns3_check_new_setup(struct cdns3_device *priv_dev) +{ + u32 ep_sts_reg; + + cdns3_select_ep(priv_dev, 0 | USB_DIR_OUT); + ep_sts_reg = readl(&priv_dev->regs->ep_sts); + + return !!(ep_sts_reg & (EP_STS_SETUP | EP_STS_STPWAIT)); +} + +/** + * cdns3_check_ep0_interrupt_proceed - Processes interrupt related to endpoint 0 + * @priv_dev: extended gadget object + * @dir: USB_DIR_IN for IN direction, USB_DIR_OUT for OUT direction + */ +void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir) +{ + u32 ep_sts_reg; + + cdns3_select_ep(priv_dev, dir); + + ep_sts_reg = readl(&priv_dev->regs->ep_sts); + writel(ep_sts_reg, &priv_dev->regs->ep_sts); + + trace_cdns3_ep0_irq(priv_dev, ep_sts_reg); + + __pending_setup_status_handler(priv_dev); + + if (ep_sts_reg & EP_STS_SETUP) + priv_dev->wait_for_setup = 1; + + if (priv_dev->wait_for_setup && ep_sts_reg & EP_STS_IOC) { + priv_dev->wait_for_setup = 0; + cdns3_allow_enable_l1(priv_dev, 0); + cdns3_ep0_setup_phase(priv_dev); + } else if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) { + priv_dev->ep0_data_dir = dir; + cdns3_transfer_completed(priv_dev); + } + + if (ep_sts_reg & EP_STS_DESCMIS) { + if (dir == 0 && !priv_dev->setup_pending) + cdns3_prepare_setup_packet(priv_dev); + } +} + +/** + * cdns3_gadget_ep0_enable + * Function shouldn't be called by gadget driver, + * endpoint 0 is allways active + */ +static int cdns3_gadget_ep0_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + return -EINVAL; +} + +/** + * cdns3_gadget_ep0_disable + * Function shouldn't be called by gadget driver, + * endpoint 0 is allways active + */ +static int cdns3_gadget_ep0_disable(struct usb_ep *ep) +{ + return -EINVAL; +} + +/** + * cdns3_gadget_ep0_set_halt + * @ep: pointer to endpoint zero object + * @value: 1 for set stall, 0 for clear stall + * + * Returns 0 + */ +static int cdns3_gadget_ep0_set_halt(struct usb_ep *ep, int value) +{ + /* TODO */ + return 0; +} + +/** + * cdns3_gadget_ep0_queue Transfer data on endpoint zero + * @ep: pointer to endpoint zero object + * @request: pointer to request object + * @gfp_flags: gfp flags + * + * Returns 0 on success, error code elsewhere + */ +static int cdns3_gadget_ep0_queue(struct usb_ep *ep, + struct usb_request *request, + gfp_t gfp_flags) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + unsigned long flags; + int erdy_sent = 0; + int ret = 0; + u8 zlp = 0; + + trace_cdns3_ep0_queue(priv_dev, request); + + /* cancel the request if controller receive new SETUP packet. */ + if (cdns3_check_new_setup(priv_dev)) + return -ECONNRESET; + + /* send STATUS stage. Should be called only for SET_CONFIGURATION */ + if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) { + spin_lock_irqsave(&priv_dev->lock, flags); + cdns3_select_ep(priv_dev, 0x00); + + erdy_sent = !priv_dev->hw_configured_flag; + cdns3_set_hw_configuration(priv_dev); + + if (!erdy_sent) + cdns3_ep0_complete_setup(priv_dev, 0, 1); + + cdns3_allow_enable_l1(priv_dev, 1); + + request->actual = 0; + priv_dev->status_completion_no_call = true; + priv_dev->pending_status_request = request; + spin_unlock_irqrestore(&priv_dev->lock, flags); + + /* + * Since there is no completion interrupt for status stage, + * it needs to call ->completion in software after + * ep0_queue is back. + */ + queue_work(system_freezable_wq, &priv_dev->pending_status_wq); + return 0; + } + + spin_lock_irqsave(&priv_dev->lock, flags); + if (!list_empty(&priv_ep->pending_req_list)) { + dev_err(priv_dev->dev, + "can't handle multiple requests for ep0\n"); + spin_unlock_irqrestore(&priv_dev->lock, flags); + return -EBUSY; + } + + ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request, + priv_dev->ep0_data_dir); + if (ret) { + spin_unlock_irqrestore(&priv_dev->lock, flags); + dev_err(priv_dev->dev, "failed to map request\n"); + return -EINVAL; + } + + request->status = -EINPROGRESS; + list_add_tail(&request->list, &priv_ep->pending_req_list); + + if (request->zero && request->length && + (request->length % ep->maxpacket == 0)) + zlp = 1; + + cdns3_ep0_run_transfer(priv_dev, request->dma, request->length, 1, zlp); + + spin_unlock_irqrestore(&priv_dev->lock, flags); + + return ret; +} + +/** + * cdns3_gadget_ep_set_wedge Set wedge on selected endpoint + * @ep: endpoint object + * + * Returns 0 + */ +int cdns3_gadget_ep_set_wedge(struct usb_ep *ep) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + dev_dbg(priv_dev->dev, "Wedge for %s\n", ep->name); + cdns3_gadget_ep_set_halt(ep, 1); + priv_ep->flags |= EP_WEDGE; + + return 0; +} + +const struct usb_ep_ops cdns3_gadget_ep0_ops = { + .enable = cdns3_gadget_ep0_enable, + .disable = cdns3_gadget_ep0_disable, + .alloc_request = cdns3_gadget_ep_alloc_request, + .free_request = cdns3_gadget_ep_free_request, + .queue = cdns3_gadget_ep0_queue, + .dequeue = cdns3_gadget_ep_dequeue, + .set_halt = cdns3_gadget_ep0_set_halt, + .set_wedge = cdns3_gadget_ep_set_wedge, +}; + +/** + * cdns3_ep0_config - Configures default endpoint + * @priv_dev: extended gadget object + * + * Functions sets parameters: maximal packet size and enables interrupts + */ +void cdns3_ep0_config(struct cdns3_device *priv_dev) +{ + struct cdns3_usb_regs __iomem *regs; + struct cdns3_endpoint *priv_ep; + u32 max_packet_size = 64; + + regs = priv_dev->regs; + + if (priv_dev->gadget.speed == USB_SPEED_SUPER) + max_packet_size = 512; + + priv_ep = priv_dev->eps[0]; + + if (!list_empty(&priv_ep->pending_req_list)) { + struct usb_request *request; + + request = cdns3_next_request(&priv_ep->pending_req_list); + list_del_init(&request->list); + } + + priv_dev->u1_allowed = 0; + priv_dev->u2_allowed = 0; + + priv_dev->gadget.ep0->maxpacket = max_packet_size; + cdns3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(max_packet_size); + + /* init ep out */ + cdns3_select_ep(priv_dev, USB_DIR_OUT); + + if (priv_dev->dev_ver >= DEV_VER_V3) { + cdns3_set_register_bit(&priv_dev->regs->dtrans, + BIT(0) | BIT(16)); + cdns3_set_register_bit(&priv_dev->regs->tdl_from_trb, + BIT(0) | BIT(16)); + } + + writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size), + ®s->ep_cfg); + + writel(EP_STS_EN_SETUPEN | EP_STS_EN_DESCMISEN | EP_STS_EN_TRBERREN, + ®s->ep_sts_en); + + /* init ep in */ + cdns3_select_ep(priv_dev, USB_DIR_IN); + + writel(EP_CFG_ENABLE | EP_CFG_MAXPKTSIZE(max_packet_size), + ®s->ep_cfg); + + writel(EP_STS_EN_SETUPEN | EP_STS_EN_TRBERREN, ®s->ep_sts_en); + + cdns3_set_register_bit(®s->usb_conf, USB_CONF_U1DS | USB_CONF_U2DS); +} + +/** + * cdns3_init_ep0 Initializes software endpoint 0 of gadget + * @priv_dev: extended gadget object + * @ep_priv: extended endpoint object + * + * Returns 0 on success else error code. + */ +int cdns3_init_ep0(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + sprintf(priv_ep->name, "ep0"); + + /* fill linux fields */ + priv_ep->endpoint.ops = &cdns3_gadget_ep0_ops; + priv_ep->endpoint.maxburst = 1; + usb_ep_set_maxpacket_limit(&priv_ep->endpoint, + CDNS3_EP0_MAX_PACKET_LIMIT); + priv_ep->endpoint.address = 0; + priv_ep->endpoint.caps.type_control = 1; + priv_ep->endpoint.caps.dir_in = 1; + priv_ep->endpoint.caps.dir_out = 1; + priv_ep->endpoint.name = priv_ep->name; + priv_ep->endpoint.desc = &cdns3_gadget_ep0_desc; + priv_dev->gadget.ep0 = &priv_ep->endpoint; + priv_ep->type = USB_ENDPOINT_XFER_CONTROL; + + return cdns3_allocate_trb_pool(priv_ep); +} diff --git a/drivers/usb/cdns3/gadget-export.h b/drivers/usb/cdns3/gadget-export.h new file mode 100644 index 000000000000..577469eee961 --- /dev/null +++ b/drivers/usb/cdns3/gadget-export.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence USBSS DRD Driver - Gadget Export APIs. + * + * Copyright (C) 2017 NXP + * Copyright (C) 2017-2018 NXP + * + * Authors: Peter Chen <peter.chen@nxp.com> + */ +#ifndef __LINUX_CDNS3_GADGET_EXPORT +#define __LINUX_CDNS3_GADGET_EXPORT + +#ifdef CONFIG_USB_CDNS3_GADGET + +int cdns3_gadget_init(struct cdns3 *cdns); +void cdns3_gadget_exit(struct cdns3 *cdns); +#else + +static inline int cdns3_gadget_init(struct cdns3 *cdns) +{ + return -ENXIO; +} + +static inline void cdns3_gadget_exit(struct cdns3 *cdns) { } + +#endif + +#endif /* __LINUX_CDNS3_GADGET_EXPORT */ diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c new file mode 100644 index 000000000000..228cdc4ab886 --- /dev/null +++ b/drivers/usb/cdns3/gadget.c @@ -0,0 +1,2744 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Driver - gadget side. + * + * Copyright (C) 2018-2019 Cadence Design Systems. + * Copyright (C) 2017-2018 NXP + * + * Authors: Pawel Jez <pjez@cadence.com>, + * Pawel Laszczak <pawell@cadence.com> + * Peter Chen <peter.chen@nxp.com> + */ + +/* + * Work around 1: + * At some situations, the controller may get stale data address in TRB + * at below sequences: + * 1. Controller read TRB includes data address + * 2. Software updates TRBs includes data address and Cycle bit + * 3. Controller read TRB which includes Cycle bit + * 4. DMA run with stale data address + * + * To fix this problem, driver needs to make the first TRB in TD as invalid. + * After preparing all TRBs driver needs to check the position of DMA and + * if the DMA point to the first just added TRB and doorbell is 1, + * then driver must defer making this TRB as valid. This TRB will be make + * as valid during adding next TRB only if DMA is stopped or at TRBERR + * interrupt. + * + * Issue has been fixed in DEV_VER_V3 version of controller. + * + * Work around 2: + * Controller for OUT endpoints has shared on-chip buffers for all incoming + * packets, including ep0out. It's FIFO buffer, so packets must be handle by DMA + * in correct order. If the first packet in the buffer will not be handled, + * then the following packets directed for other endpoints and functions + * will be blocked. + * Additionally the packets directed to one endpoint can block entire on-chip + * buffers. In this case transfer to other endpoints also will blocked. + * + * To resolve this issue after raising the descriptor missing interrupt + * driver prepares internal usb_request object and use it to arm DMA transfer. + * + * The problematic situation was observed in case when endpoint has been enabled + * but no usb_request were queued. Driver try detects such endpoints and will + * use this workaround only for these endpoint. + * + * Driver use limited number of buffer. This number can be set by macro + * CDNS3_WA2_NUM_BUFFERS. + * + * Such blocking situation was observed on ACM gadget. For this function + * host send OUT data packet but ACM function is not prepared for this packet. + * It's cause that buffer placed in on chip memory block transfer to other + * endpoints. + * + * Issue has been fixed in DEV_VER_V2 version of controller. + * + */ + +#include <linux/dma-mapping.h> +#include <linux/usb/gadget.h> +#include <linux/module.h> +#include <linux/iopoll.h> + +#include "core.h" +#include "gadget-export.h" +#include "gadget.h" +#include "trace.h" +#include "drd.h" + +static int __cdns3_gadget_ep_queue(struct usb_ep *ep, + struct usb_request *request, + gfp_t gfp_flags); + +/** + * cdns3_set_register_bit - set bit in given register. + * @ptr: address of device controller register to be read and changed + * @mask: bits requested to set + */ +void cdns3_set_register_bit(void __iomem *ptr, u32 mask) +{ + mask = readl(ptr) | mask; + writel(mask, ptr); +} + +/** + * cdns3_ep_addr_to_index - Macro converts endpoint address to + * index of endpoint object in cdns3_device.eps[] container + * @ep_addr: endpoint address for which endpoint object is required + * + */ +u8 cdns3_ep_addr_to_index(u8 ep_addr) +{ + return (((ep_addr & 0x7F)) + ((ep_addr & USB_DIR_IN) ? 16 : 0)); +} + +static int cdns3_get_dma_pos(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + int dma_index; + + dma_index = readl(&priv_dev->regs->ep_traddr) - priv_ep->trb_pool_dma; + + return dma_index / TRB_SIZE; +} + +/** + * cdns3_next_request - returns next request from list + * @list: list containing requests + * + * Returns request or NULL if no requests in list + */ +struct usb_request *cdns3_next_request(struct list_head *list) +{ + return list_first_entry_or_null(list, struct usb_request, list); +} + +/** + * cdns3_next_align_buf - returns next buffer from list + * @list: list containing buffers + * + * Returns buffer or NULL if no buffers in list + */ +struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list) +{ + return list_first_entry_or_null(list, struct cdns3_aligned_buf, list); +} + +/** + * cdns3_next_priv_request - returns next request from list + * @list: list containing requests + * + * Returns request or NULL if no requests in list + */ +struct cdns3_request *cdns3_next_priv_request(struct list_head *list) +{ + return list_first_entry_or_null(list, struct cdns3_request, list); +} + +/** + * select_ep - selects endpoint + * @priv_dev: extended gadget object + * @ep: endpoint address + */ +void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep) +{ + if (priv_dev->selected_ep == ep) + return; + + priv_dev->selected_ep = ep; + writel(ep, &priv_dev->regs->ep_sel); +} + +dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep, + struct cdns3_trb *trb) +{ + u32 offset = (char *)trb - (char *)priv_ep->trb_pool; + + return priv_ep->trb_pool_dma + offset; +} + +int cdns3_ring_size(struct cdns3_endpoint *priv_ep) +{ + switch (priv_ep->type) { + case USB_ENDPOINT_XFER_ISOC: + return TRB_ISO_RING_SIZE; + case USB_ENDPOINT_XFER_CONTROL: + return TRB_CTRL_RING_SIZE; + default: + return TRB_RING_SIZE; + } +} + +/** + * cdns3_allocate_trb_pool - Allocates TRB's pool for selected endpoint + * @priv_ep: endpoint object + * + * Function will return 0 on success or -ENOMEM on allocation error + */ +int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + int ring_size = cdns3_ring_size(priv_ep); + struct cdns3_trb *link_trb; + + if (!priv_ep->trb_pool) { + priv_ep->trb_pool = dma_alloc_coherent(priv_dev->sysdev, + ring_size, + &priv_ep->trb_pool_dma, + GFP_DMA32 | GFP_ATOMIC); + if (!priv_ep->trb_pool) + return -ENOMEM; + } else { + memset(priv_ep->trb_pool, 0, ring_size); + } + + if (!priv_ep->num) + return 0; + + priv_ep->num_trbs = ring_size / TRB_SIZE; + /* Initialize the last TRB as Link TRB. */ + link_trb = (priv_ep->trb_pool + (priv_ep->num_trbs - 1)); + link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma); + link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE; + + return 0; +} + +static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + if (priv_ep->trb_pool) { + dma_free_coherent(priv_dev->sysdev, + cdns3_ring_size(priv_ep), + priv_ep->trb_pool, priv_ep->trb_pool_dma); + priv_ep->trb_pool = NULL; + } +} + +/** + * cdns3_ep_stall_flush - Stalls and flushes selected endpoint + * @priv_ep: endpoint object + * + * Endpoint must be selected before call to this function + */ +static void cdns3_ep_stall_flush(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + int val; + + trace_cdns3_halt(priv_ep, 1, 1); + + writel(EP_CMD_DFLUSH | EP_CMD_ERDY | EP_CMD_SSTALL, + &priv_dev->regs->ep_cmd); + + /* wait for DFLUSH cleared */ + readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val, + !(val & EP_CMD_DFLUSH), 1, 1000); + priv_ep->flags |= EP_STALLED; + priv_ep->flags &= ~EP_STALL_PENDING; +} + +/** + * cdns3_hw_reset_eps_config - reset endpoints configuration kept by controller. + * @priv_dev: extended gadget object + */ +void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev) +{ + writel(USB_CONF_CFGRST, &priv_dev->regs->usb_conf); + + cdns3_allow_enable_l1(priv_dev, 0); + priv_dev->hw_configured_flag = 0; + priv_dev->onchip_used_size = 0; + priv_dev->out_mem_is_allocated = 0; + priv_dev->wait_for_setup = 0; +} + +/** + * cdns3_ep_inc_trb - increment a trb index. + * @index: Pointer to the TRB index to increment. + * @cs: Cycle state + * @trb_in_seg: number of TRBs in segment + * + * The index should never point to the link TRB. After incrementing, + * if it is point to the link TRB, wrap around to the beginning and revert + * cycle state bit The + * link TRB is always at the last TRB entry. + */ +static void cdns3_ep_inc_trb(int *index, u8 *cs, int trb_in_seg) +{ + (*index)++; + if (*index == (trb_in_seg - 1)) { + *index = 0; + *cs ^= 1; + } +} + +/** + * cdns3_ep_inc_enq - increment endpoint's enqueue pointer + * @priv_ep: The endpoint whose enqueue pointer we're incrementing + */ +static void cdns3_ep_inc_enq(struct cdns3_endpoint *priv_ep) +{ + priv_ep->free_trbs--; + cdns3_ep_inc_trb(&priv_ep->enqueue, &priv_ep->pcs, priv_ep->num_trbs); +} + +/** + * cdns3_ep_inc_deq - increment endpoint's dequeue pointer + * @priv_ep: The endpoint whose dequeue pointer we're incrementing + */ +static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep) +{ + priv_ep->free_trbs++; + cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs); +} + +void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req) +{ + struct cdns3_endpoint *priv_ep = priv_req->priv_ep; + int current_trb = priv_req->start_trb; + + while (current_trb != priv_req->end_trb) { + cdns3_ep_inc_deq(priv_ep); + current_trb = priv_ep->dequeue; + } + + cdns3_ep_inc_deq(priv_ep); +} + +/** + * cdns3_allow_enable_l1 - enable/disable permits to transition to L1. + * @priv_dev: Extended gadget object + * @enable: Enable/disable permit to transition to L1. + * + * If bit USB_CONF_L1EN is set and device receive Extended Token packet, + * then controller answer with ACK handshake. + * If bit USB_CONF_L1DS is set and device receive Extended Token packet, + * then controller answer with NYET handshake. + */ +void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable) +{ + if (enable) + writel(USB_CONF_L1EN, &priv_dev->regs->usb_conf); + else + writel(USB_CONF_L1DS, &priv_dev->regs->usb_conf); +} + +enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev) +{ + u32 reg; + + reg = readl(&priv_dev->regs->usb_sts); + + if (DEV_SUPERSPEED(reg)) + return USB_SPEED_SUPER; + else if (DEV_HIGHSPEED(reg)) + return USB_SPEED_HIGH; + else if (DEV_FULLSPEED(reg)) + return USB_SPEED_FULL; + else if (DEV_LOWSPEED(reg)) + return USB_SPEED_LOW; + return USB_SPEED_UNKNOWN; +} + +/** + * cdns3_start_all_request - add to ring all request not started + * @priv_dev: Extended gadget object + * @priv_ep: The endpoint for whom request will be started. + * + * Returns return ENOMEM if transfer ring i not enough TRBs to start + * all requests. + */ +static int cdns3_start_all_request(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + struct usb_request *request; + int ret = 0; + + while (!list_empty(&priv_ep->deferred_req_list)) { + request = cdns3_next_request(&priv_ep->deferred_req_list); + + ret = cdns3_ep_run_transfer(priv_ep, request); + if (ret) + return ret; + + list_del(&request->list); + list_add_tail(&request->list, + &priv_ep->pending_req_list); + } + + priv_ep->flags &= ~EP_RING_FULL; + return ret; +} + +/* + * WA2: Set flag for all not ISOC OUT endpoints. If this flag is set + * driver try to detect whether endpoint need additional internal + * buffer for unblocking on-chip FIFO buffer. This flag will be cleared + * if before first DESCMISS interrupt the DMA will be armed. + */ +#define cdns3_wa2_enable_detection(priv_dev, ep_priv, reg) do { \ + if (!priv_ep->dir && priv_ep->type != USB_ENDPOINT_XFER_ISOC) { \ + priv_ep->flags |= EP_QUIRK_EXTRA_BUF_DET; \ + (reg) |= EP_STS_EN_DESCMISEN; \ + } } while (0) + +/** + * cdns3_wa2_descmiss_copy_data copy data from internal requests to + * request queued by class driver. + * @priv_ep: extended endpoint object + * @request: request object + */ +static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep, + struct usb_request *request) +{ + struct usb_request *descmiss_req; + struct cdns3_request *descmiss_priv_req; + + while (!list_empty(&priv_ep->wa2_descmiss_req_list)) { + int chunk_end; + int length; + + descmiss_priv_req = + cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list); + descmiss_req = &descmiss_priv_req->request; + + /* driver can't touch pending request */ + if (descmiss_priv_req->flags & REQUEST_PENDING) + break; + + chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH; + length = request->actual + descmiss_req->actual; + + request->status = descmiss_req->status; + + if (length <= request->length) { + memcpy(&((u8 *)request->buf)[request->actual], + descmiss_req->buf, + descmiss_req->actual); + request->actual = length; + } else { + /* It should never occures */ + request->status = -ENOMEM; + } + + list_del_init(&descmiss_priv_req->list); + + kfree(descmiss_req->buf); + cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req); + --priv_ep->wa2_counter; + + if (!chunk_end) + break; + } +} + +struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req) +{ + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN && + priv_req->flags & REQUEST_INTERNAL) { + struct usb_request *req; + + req = cdns3_next_request(&priv_ep->deferred_req_list); + + priv_ep->descmis_req = NULL; + + if (!req) + return NULL; + + cdns3_wa2_descmiss_copy_data(priv_ep, req); + if (!(priv_ep->flags & EP_QUIRK_END_TRANSFER) && + req->length != req->actual) { + /* wait for next part of transfer */ + return NULL; + } + + if (req->status == -EINPROGRESS) + req->status = 0; + + list_del_init(&req->list); + cdns3_start_all_request(priv_dev, priv_ep); + return req; + } + + return &priv_req->request; +} + +int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req) +{ + int deferred = 0; + + /* + * If transfer was queued before DESCMISS appear than we + * can disable handling of DESCMISS interrupt. Driver assumes that it + * can disable special treatment for this endpoint. + */ + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) { + u32 reg; + + cdns3_select_ep(priv_dev, priv_ep->num | priv_ep->dir); + priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET; + reg = readl(&priv_dev->regs->ep_sts_en); + reg &= ~EP_STS_EN_DESCMISEN; + trace_cdns3_wa2(priv_ep, "workaround disabled\n"); + writel(reg, &priv_dev->regs->ep_sts_en); + } + + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) { + u8 pending_empty = list_empty(&priv_ep->pending_req_list); + u8 descmiss_empty = list_empty(&priv_ep->wa2_descmiss_req_list); + + /* + * DESCMISS transfer has been finished, so data will be + * directly copied from internal allocated usb_request + * objects. + */ + if (pending_empty && !descmiss_empty && + !(priv_req->flags & REQUEST_INTERNAL)) { + cdns3_wa2_descmiss_copy_data(priv_ep, + &priv_req->request); + + trace_cdns3_wa2(priv_ep, "get internal stored data"); + + list_add_tail(&priv_req->request.list, + &priv_ep->pending_req_list); + cdns3_gadget_giveback(priv_ep, priv_req, + priv_req->request.status); + + /* + * Intentionally driver returns positive value as + * correct value. It informs that transfer has + * been finished. + */ + return EINPROGRESS; + } + + /* + * Driver will wait for completion DESCMISS transfer, + * before starts new, not DESCMISS transfer. + */ + if (!pending_empty && !descmiss_empty) { + trace_cdns3_wa2(priv_ep, "wait for pending transfer\n"); + deferred = 1; + } + + if (priv_req->flags & REQUEST_INTERNAL) + list_add_tail(&priv_req->list, + &priv_ep->wa2_descmiss_req_list); + } + + return deferred; +} + +static void cdns3_wa2_remove_old_request(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_request *priv_req; + + while (!list_empty(&priv_ep->wa2_descmiss_req_list)) { + u8 chain; + + priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list); + chain = !!(priv_req->flags & REQUEST_INTERNAL_CH); + + trace_cdns3_wa2(priv_ep, "removes eldest request"); + + kfree(priv_req->request.buf); + cdns3_gadget_ep_free_request(&priv_ep->endpoint, + &priv_req->request); + list_del_init(&priv_req->list); + --priv_ep->wa2_counter; + + if (!chain) + break; + } +} + +/** + * cdns3_wa2_descmissing_packet - handles descriptor missing event. + * @priv_dev: extended gadget object + * + * This function is used only for WA2. For more information see Work around 2 + * description. + */ +static void cdns3_wa2_descmissing_packet(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_request *priv_req; + struct usb_request *request; + + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) { + priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET; + priv_ep->flags |= EP_QUIRK_EXTRA_BUF_EN; + } + + trace_cdns3_wa2(priv_ep, "Description Missing detected\n"); + + if (priv_ep->wa2_counter >= CDNS3_WA2_NUM_BUFFERS) + cdns3_wa2_remove_old_request(priv_ep); + + request = cdns3_gadget_ep_alloc_request(&priv_ep->endpoint, + GFP_ATOMIC); + if (!request) + goto err; + + priv_req = to_cdns3_request(request); + priv_req->flags |= REQUEST_INTERNAL; + + /* if this field is still assigned it indicate that transfer related + * with this request has not been finished yet. Driver in this + * case simply allocate next request and assign flag REQUEST_INTERNAL_CH + * flag to previous one. It will indicate that current request is + * part of the previous one. + */ + if (priv_ep->descmis_req) + priv_ep->descmis_req->flags |= REQUEST_INTERNAL_CH; + + priv_req->request.buf = kzalloc(CDNS3_DESCMIS_BUF_SIZE, + GFP_ATOMIC); + priv_ep->wa2_counter++; + + if (!priv_req->request.buf) { + cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); + goto err; + } + + priv_req->request.length = CDNS3_DESCMIS_BUF_SIZE; + priv_ep->descmis_req = priv_req; + + __cdns3_gadget_ep_queue(&priv_ep->endpoint, + &priv_ep->descmis_req->request, + GFP_ATOMIC); + + return; + +err: + dev_err(priv_ep->cdns3_dev->dev, + "Failed: No sufficient memory for DESCMIS\n"); +} + +/** + * cdns3_gadget_giveback - call struct usb_request's ->complete callback + * @priv_ep: The endpoint to whom the request belongs to + * @priv_req: The request we're giving back + * @status: completion code for the request + * + * Must be called with controller's lock held and interrupts disabled. This + * function will unmap @req and call its ->complete() callback to notify upper + * layers that it has completed. + */ +void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req, + int status) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct usb_request *request = &priv_req->request; + + list_del_init(&request->list); + + if (request->status == -EINPROGRESS) + request->status = status; + + usb_gadget_unmap_request_by_dev(priv_dev->sysdev, request, + priv_ep->dir); + + if ((priv_req->flags & REQUEST_UNALIGNED) && + priv_ep->dir == USB_DIR_OUT && !request->status) + memcpy(request->buf, priv_req->aligned_buf->buf, + request->length); + + priv_req->flags &= ~(REQUEST_PENDING | REQUEST_UNALIGNED); + trace_cdns3_gadget_giveback(priv_req); + + if (priv_dev->dev_ver < DEV_VER_V2) { + request = cdns3_wa2_gadget_giveback(priv_dev, priv_ep, + priv_req); + if (!request) + return; + } + + if (request->complete) { + spin_unlock(&priv_dev->lock); + usb_gadget_giveback_request(&priv_ep->endpoint, + request); + spin_lock(&priv_dev->lock); + } + + if (request->buf == priv_dev->zlp_buf) + cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); +} + +void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep) +{ + /* Work around for stale data address in TRB*/ + if (priv_ep->wa1_set) { + trace_cdns3_wa1(priv_ep, "restore cycle bit"); + + priv_ep->wa1_set = 0; + priv_ep->wa1_trb_index = 0xFFFF; + if (priv_ep->wa1_cycle_bit) { + priv_ep->wa1_trb->control = + priv_ep->wa1_trb->control | 0x1; + } else { + priv_ep->wa1_trb->control = + priv_ep->wa1_trb->control & ~0x1; + } + } +} + +static void cdns3_free_aligned_request_buf(struct work_struct *work) +{ + struct cdns3_device *priv_dev = container_of(work, struct cdns3_device, + aligned_buf_wq); + struct cdns3_aligned_buf *buf, *tmp; + unsigned long flags; + + spin_lock_irqsave(&priv_dev->lock, flags); + + list_for_each_entry_safe(buf, tmp, &priv_dev->aligned_buf_list, list) { + if (!buf->in_use) { + list_del(&buf->list); + + /* + * Re-enable interrupts to free DMA capable memory. + * Driver can't free this memory with disabled + * interrupts. + */ + spin_unlock_irqrestore(&priv_dev->lock, flags); + dma_free_coherent(priv_dev->sysdev, buf->size, + buf->buf, buf->dma); + kfree(buf); + spin_lock_irqsave(&priv_dev->lock, flags); + } + } + + spin_unlock_irqrestore(&priv_dev->lock, flags); +} + +static int cdns3_prepare_aligned_request_buf(struct cdns3_request *priv_req) +{ + struct cdns3_endpoint *priv_ep = priv_req->priv_ep; + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct cdns3_aligned_buf *buf; + + /* check if buffer is aligned to 8. */ + if (!((uintptr_t)priv_req->request.buf & 0x7)) + return 0; + + buf = priv_req->aligned_buf; + + if (!buf || priv_req->request.length > buf->size) { + buf = kzalloc(sizeof(*buf), GFP_ATOMIC); + if (!buf) + return -ENOMEM; + + buf->size = priv_req->request.length; + + buf->buf = dma_alloc_coherent(priv_dev->sysdev, + buf->size, + &buf->dma, + GFP_ATOMIC); + if (!buf->buf) { + kfree(buf); + return -ENOMEM; + } + + if (priv_req->aligned_buf) { + trace_cdns3_free_aligned_request(priv_req); + priv_req->aligned_buf->in_use = 0; + queue_work(system_freezable_wq, + &priv_dev->aligned_buf_wq); + } + + buf->in_use = 1; + priv_req->aligned_buf = buf; + + list_add_tail(&buf->list, + &priv_dev->aligned_buf_list); + } + + if (priv_ep->dir == USB_DIR_IN) { + memcpy(buf->buf, priv_req->request.buf, + priv_req->request.length); + } + + priv_req->flags |= REQUEST_UNALIGNED; + trace_cdns3_prepare_aligned_request(priv_req); + + return 0; +} + +static int cdns3_wa1_update_guard(struct cdns3_endpoint *priv_ep, + struct cdns3_trb *trb) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + if (!priv_ep->wa1_set) { + u32 doorbell; + + doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY); + + if (doorbell) { + priv_ep->wa1_cycle_bit = priv_ep->pcs ? TRB_CYCLE : 0; + priv_ep->wa1_set = 1; + priv_ep->wa1_trb = trb; + priv_ep->wa1_trb_index = priv_ep->enqueue; + trace_cdns3_wa1(priv_ep, "set guard"); + return 0; + } + } + return 1; +} + +static void cdns3_wa1_tray_restore_cycle_bit(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + int dma_index; + u32 doorbell; + + doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY); + dma_index = cdns3_get_dma_pos(priv_dev, priv_ep); + + if (!doorbell || dma_index != priv_ep->wa1_trb_index) + cdns3_wa1_restore_cycle_bit(priv_ep); +} + +/** + * cdns3_ep_run_transfer - start transfer on no-default endpoint hardware + * @priv_ep: endpoint object + * + * Returns zero on success or negative value on failure + */ +int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct cdns3_request *priv_req; + struct cdns3_trb *trb; + dma_addr_t trb_dma; + u32 togle_pcs = 1; + int sg_iter = 0; + int num_trb; + int address; + u32 control; + int pcs; + + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) + num_trb = priv_ep->interval; + else + num_trb = request->num_sgs ? request->num_sgs : 1; + + if (num_trb > priv_ep->free_trbs) { + priv_ep->flags |= EP_RING_FULL; + return -ENOBUFS; + } + + priv_req = to_cdns3_request(request); + address = priv_ep->endpoint.desc->bEndpointAddress; + + priv_ep->flags |= EP_PENDING_REQUEST; + + /* must allocate buffer aligned to 8 */ + if (priv_req->flags & REQUEST_UNALIGNED) + trb_dma = priv_req->aligned_buf->dma; + else + trb_dma = request->dma; + + trb = priv_ep->trb_pool + priv_ep->enqueue; + priv_req->start_trb = priv_ep->enqueue; + priv_req->trb = trb; + + cdns3_select_ep(priv_ep->cdns3_dev, address); + + /* prepare ring */ + if ((priv_ep->enqueue + num_trb) >= (priv_ep->num_trbs - 1)) { + struct cdns3_trb *link_trb; + int doorbell, dma_index; + u32 ch_bit = 0; + + doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY); + dma_index = cdns3_get_dma_pos(priv_dev, priv_ep); + + /* Driver can't update LINK TRB if it is current processed. */ + if (doorbell && dma_index == priv_ep->num_trbs - 1) { + priv_ep->flags |= EP_DEFERRED_DRDY; + return -ENOBUFS; + } + + /*updating C bt in Link TRB before starting DMA*/ + link_trb = priv_ep->trb_pool + (priv_ep->num_trbs - 1); + /* + * For TRs size equal 2 enabling TRB_CHAIN for epXin causes + * that DMA stuck at the LINK TRB. + * On the other hand, removing TRB_CHAIN for longer TRs for + * epXout cause that DMA stuck after handling LINK TRB. + * To eliminate this strange behavioral driver set TRB_CHAIN + * bit only for TR size > 2. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC || + TRBS_PER_SEGMENT > 2) + ch_bit = TRB_CHAIN; + + link_trb->control = ((priv_ep->pcs) ? TRB_CYCLE : 0) | + TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit; + } + + if (priv_dev->dev_ver <= DEV_VER_V2) + togle_pcs = cdns3_wa1_update_guard(priv_ep, trb); + + /* set incorrect Cycle Bit for first trb*/ + control = priv_ep->pcs ? 0 : TRB_CYCLE; + + do { + u32 length; + u16 td_size = 0; + + /* fill TRB */ + control |= TRB_TYPE(TRB_NORMAL); + trb->buffer = TRB_BUFFER(request->num_sgs == 0 + ? trb_dma : request->sg[sg_iter].dma_address); + + if (likely(!request->num_sgs)) + length = request->length; + else + length = request->sg[sg_iter].length; + + if (likely(priv_dev->dev_ver >= DEV_VER_V2)) + td_size = DIV_ROUND_UP(length, + priv_ep->endpoint.maxpacket); + + trb->length = TRB_BURST_LEN(priv_ep->trb_burst_size) | + TRB_LEN(length); + if (priv_dev->gadget.speed == USB_SPEED_SUPER) + trb->length |= TRB_TDL_SS_SIZE(td_size); + else + control |= TRB_TDL_HS_SIZE(td_size); + + pcs = priv_ep->pcs ? TRB_CYCLE : 0; + + /* + * first trb should be prepared as last to avoid processing + * transfer to early + */ + if (sg_iter != 0) + control |= pcs; + + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) { + control |= TRB_IOC | TRB_ISP; + } else { + /* for last element in TD or in SG list */ + if (sg_iter == (num_trb - 1) && sg_iter != 0) + control |= pcs | TRB_IOC | TRB_ISP; + } + + if (sg_iter) + trb->control = control; + else + priv_req->trb->control = control; + + control = 0; + ++sg_iter; + priv_req->end_trb = priv_ep->enqueue; + cdns3_ep_inc_enq(priv_ep); + trb = priv_ep->trb_pool + priv_ep->enqueue; + } while (sg_iter < num_trb); + + trb = priv_req->trb; + + priv_req->flags |= REQUEST_PENDING; + + if (sg_iter == 1) + trb->control |= TRB_IOC | TRB_ISP; + + /* + * Memory barrier - cycle bit must be set before other filds in trb. + */ + wmb(); + + /* give the TD to the consumer*/ + if (togle_pcs) + trb->control = trb->control ^ 1; + + if (priv_dev->dev_ver <= DEV_VER_V2) + cdns3_wa1_tray_restore_cycle_bit(priv_dev, priv_ep); + + trace_cdns3_prepare_trb(priv_ep, priv_req->trb); + + /* + * Memory barrier - Cycle Bit must be set before trb->length and + * trb->buffer fields. + */ + wmb(); + + /* + * For DMULT mode we can set address to transfer ring only once after + * enabling endpoint. + */ + if (priv_ep->flags & EP_UPDATE_EP_TRBADDR) { + /* + * Until SW is not ready to handle the OUT transfer the ISO OUT + * Endpoint should be disabled (EP_CFG.ENABLE = 0). + * EP_CFG_ENABLE must be set before updating ep_traddr. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir && + !(priv_ep->flags & EP_QUIRK_ISO_OUT_EN)) { + priv_ep->flags |= EP_QUIRK_ISO_OUT_EN; + cdns3_set_register_bit(&priv_dev->regs->ep_cfg, + EP_CFG_ENABLE); + } + + writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma + + priv_req->start_trb * TRB_SIZE), + &priv_dev->regs->ep_traddr); + + priv_ep->flags &= ~EP_UPDATE_EP_TRBADDR; + } + + if (!priv_ep->wa1_set && !(priv_ep->flags & EP_STALLED)) { + trace_cdns3_ring(priv_ep); + /*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/ + writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts); + writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd); + trace_cdns3_doorbell_epx(priv_ep->name, + readl(&priv_dev->regs->ep_traddr)); + } + + /* WORKAROUND for transition to L0 */ + __cdns3_gadget_wakeup(priv_dev); + + return 0; +} + +void cdns3_set_hw_configuration(struct cdns3_device *priv_dev) +{ + struct cdns3_endpoint *priv_ep; + struct usb_ep *ep; + int val; + + if (priv_dev->hw_configured_flag) + return; + + writel(USB_CONF_CFGSET, &priv_dev->regs->usb_conf); + writel(EP_CMD_ERDY | EP_CMD_REQ_CMPL, &priv_dev->regs->ep_cmd); + + cdns3_set_register_bit(&priv_dev->regs->usb_conf, + USB_CONF_U1EN | USB_CONF_U2EN); + + /* wait until configuration set */ + readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val, + val & USB_STS_CFGSTS_MASK, 1, 100); + + priv_dev->hw_configured_flag = 1; + + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) { + if (ep->enabled) { + priv_ep = ep_to_cdns3_ep(ep); + cdns3_start_all_request(priv_dev, priv_ep); + } + } +} + +/** + * cdns3_request_handled - check whether request has been handled by DMA + * + * @priv_ep: extended endpoint object. + * @priv_req: request object for checking + * + * Endpoint must be selected before invoking this function. + * + * Returns false if request has not been handled by DMA, else returns true. + * + * SR - start ring + * ER - end ring + * DQ = priv_ep->dequeue - dequeue position + * EQ = priv_ep->enqueue - enqueue position + * ST = priv_req->start_trb - index of first TRB in transfer ring + * ET = priv_req->end_trb - index of last TRB in transfer ring + * CI = current_index - index of processed TRB by DMA. + * + * As first step, function checks if cycle bit for priv_req->start_trb is + * correct. + * + * some rules: + * 1. priv_ep->dequeue never exceed current_index. + * 2 priv_ep->enqueue never exceed priv_ep->dequeue + * 3. exception: priv_ep->enqueue == priv_ep->dequeue + * and priv_ep->free_trbs is zero. + * This case indicate that TR is full. + * + * Then We can split recognition into two parts: + * Case 1 - priv_ep->dequeue < current_index + * SR ... EQ ... DQ ... CI ... ER + * SR ... DQ ... CI ... EQ ... ER + * + * Request has been handled by DMA if ST and ET is between DQ and CI. + * + * Case 2 - priv_ep->dequeue > current_index + * This situation take place when CI go through the LINK TRB at the end of + * transfer ring. + * SR ... CI ... EQ ... DQ ... ER + * + * Request has been handled by DMA if ET is less then CI or + * ET is greater or equal DQ. + */ +static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct cdns3_trb *trb = priv_req->trb; + int current_index = 0; + int handled = 0; + int doorbell; + + current_index = cdns3_get_dma_pos(priv_dev, priv_ep); + doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY); + + trb = &priv_ep->trb_pool[priv_req->start_trb]; + + if ((trb->control & TRB_CYCLE) != priv_ep->ccs) + goto finish; + + if (doorbell == 1 && current_index == priv_ep->dequeue) + goto finish; + + /* The corner case for TRBS_PER_SEGMENT equal 2). */ + if (TRBS_PER_SEGMENT == 2 && priv_ep->type != USB_ENDPOINT_XFER_ISOC) { + handled = 1; + goto finish; + } + + if (priv_ep->enqueue == priv_ep->dequeue && + priv_ep->free_trbs == 0) { + handled = 1; + } else if (priv_ep->dequeue < current_index) { + if ((current_index == (priv_ep->num_trbs - 1)) && + !priv_ep->dequeue) + goto finish; + + if (priv_req->end_trb >= priv_ep->dequeue && + priv_req->end_trb < current_index) + handled = 1; + } else if (priv_ep->dequeue > current_index) { + if (priv_req->end_trb < current_index || + priv_req->end_trb >= priv_ep->dequeue) + handled = 1; + } + +finish: + trace_cdns3_request_handled(priv_req, current_index, handled); + + return handled; +} + +static void cdns3_transfer_completed(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + struct cdns3_request *priv_req; + struct usb_request *request; + struct cdns3_trb *trb; + + while (!list_empty(&priv_ep->pending_req_list)) { + request = cdns3_next_request(&priv_ep->pending_req_list); + priv_req = to_cdns3_request(request); + + /* Re-select endpoint. It could be changed by other CPU during + * handling usb_gadget_giveback_request. + */ + cdns3_select_ep(priv_dev, priv_ep->endpoint.address); + + if (!cdns3_request_handled(priv_ep, priv_req)) + goto prepare_next_td; + + trb = priv_ep->trb_pool + priv_ep->dequeue; + trace_cdns3_complete_trb(priv_ep, trb); + + if (trb != priv_req->trb) + dev_warn(priv_dev->dev, + "request_trb=0x%p, queue_trb=0x%p\n", + priv_req->trb, trb); + + request->actual = TRB_LEN(le32_to_cpu(trb->length)); + cdns3_move_deq_to_next_trb(priv_req); + cdns3_gadget_giveback(priv_ep, priv_req, 0); + + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC && + TRBS_PER_SEGMENT == 2) + break; + } + priv_ep->flags &= ~EP_PENDING_REQUEST; + +prepare_next_td: + if (!(priv_ep->flags & EP_STALLED) && + !(priv_ep->flags & EP_STALL_PENDING)) + cdns3_start_all_request(priv_dev, priv_ep); +} + +void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + cdns3_wa1_restore_cycle_bit(priv_ep); + + if (rearm) { + trace_cdns3_ring(priv_ep); + + /* Cycle Bit must be updated before arming DMA. */ + wmb(); + writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd); + + __cdns3_gadget_wakeup(priv_dev); + + trace_cdns3_doorbell_epx(priv_ep->name, + readl(&priv_dev->regs->ep_traddr)); + } +} + +/** + * cdns3_check_ep_interrupt_proceed - Processes interrupt related to endpoint + * @priv_ep: endpoint object + * + * Returns 0 + */ +static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + u32 ep_sts_reg; + + cdns3_select_ep(priv_dev, priv_ep->endpoint.address); + + trace_cdns3_epx_irq(priv_dev, priv_ep); + + ep_sts_reg = readl(&priv_dev->regs->ep_sts); + writel(ep_sts_reg, &priv_dev->regs->ep_sts); + + if (ep_sts_reg & EP_STS_TRBERR) { + if (priv_ep->flags & EP_STALL_PENDING && + !(ep_sts_reg & EP_STS_DESCMIS && + priv_dev->dev_ver < DEV_VER_V2)) { + cdns3_ep_stall_flush(priv_ep); + } + + /* + * For isochronous transfer driver completes request on + * IOC or on TRBERR. IOC appears only when device receive + * OUT data packet. If host disable stream or lost some packet + * then the only way to finish all queued transfer is to do it + * on TRBERR event. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && + !priv_ep->wa1_set) { + if (!priv_ep->dir) { + u32 ep_cfg = readl(&priv_dev->regs->ep_cfg); + + ep_cfg &= ~EP_CFG_ENABLE; + writel(ep_cfg, &priv_dev->regs->ep_cfg); + priv_ep->flags &= ~EP_QUIRK_ISO_OUT_EN; + } + cdns3_transfer_completed(priv_dev, priv_ep); + } else if (!(priv_ep->flags & EP_STALLED) && + !(priv_ep->flags & EP_STALL_PENDING)) { + if (priv_ep->flags & EP_DEFERRED_DRDY) { + priv_ep->flags &= ~EP_DEFERRED_DRDY; + cdns3_start_all_request(priv_dev, priv_ep); + } else { + cdns3_rearm_transfer(priv_ep, + priv_ep->wa1_set); + } + } + } + + if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) { + if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) { + if (ep_sts_reg & EP_STS_ISP) + priv_ep->flags |= EP_QUIRK_END_TRANSFER; + else + priv_ep->flags &= ~EP_QUIRK_END_TRANSFER; + } + + cdns3_transfer_completed(priv_dev, priv_ep); + } + + /* + * WA2: this condition should only be meet when + * priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET or + * priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN. + * In other cases this interrupt will be disabled/ + */ + if (ep_sts_reg & EP_STS_DESCMIS && priv_dev->dev_ver < DEV_VER_V2 && + !(priv_ep->flags & EP_STALLED)) + cdns3_wa2_descmissing_packet(priv_ep); + + return 0; +} + +static void cdns3_disconnect_gadget(struct cdns3_device *priv_dev) +{ + if (priv_dev->gadget_driver && priv_dev->gadget_driver->disconnect) { + spin_unlock(&priv_dev->lock); + priv_dev->gadget_driver->disconnect(&priv_dev->gadget); + spin_lock(&priv_dev->lock); + } +} + +/** + * cdns3_check_usb_interrupt_proceed - Processes interrupt related to device + * @priv_dev: extended gadget object + * @usb_ists: bitmap representation of device's reported interrupts + * (usb_ists register value) + */ +static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev, + u32 usb_ists) +{ + int speed = 0; + + trace_cdns3_usb_irq(priv_dev, usb_ists); + if (usb_ists & USB_ISTS_L1ENTI) { + /* + * WORKAROUND: CDNS3 controller has issue with hardware resuming + * from L1. To fix it, if any DMA transfer is pending driver + * must starts driving resume signal immediately. + */ + if (readl(&priv_dev->regs->drbl)) + __cdns3_gadget_wakeup(priv_dev); + } + + /* Connection detected */ + if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) { + speed = cdns3_get_speed(priv_dev); + priv_dev->gadget.speed = speed; + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_POWERED); + cdns3_ep0_config(priv_dev); + } + + /* Disconnection detected */ + if (usb_ists & (USB_ISTS_DIS2I | USB_ISTS_DISI)) { + cdns3_disconnect_gadget(priv_dev); + priv_dev->gadget.speed = USB_SPEED_UNKNOWN; + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED); + cdns3_hw_reset_eps_config(priv_dev); + } + + if (usb_ists & (USB_ISTS_L2ENTI | USB_ISTS_U3ENTI)) { + if (priv_dev->gadget_driver && + priv_dev->gadget_driver->suspend) { + spin_unlock(&priv_dev->lock); + priv_dev->gadget_driver->suspend(&priv_dev->gadget); + spin_lock(&priv_dev->lock); + } + } + + if (usb_ists & (USB_ISTS_L2EXTI | USB_ISTS_U3EXTI)) { + if (priv_dev->gadget_driver && + priv_dev->gadget_driver->resume) { + spin_unlock(&priv_dev->lock); + priv_dev->gadget_driver->resume(&priv_dev->gadget); + spin_lock(&priv_dev->lock); + } + } + + /* reset*/ + if (usb_ists & (USB_ISTS_UWRESI | USB_ISTS_UHRESI | USB_ISTS_U2RESI)) { + if (priv_dev->gadget_driver) { + spin_unlock(&priv_dev->lock); + usb_gadget_udc_reset(&priv_dev->gadget, + priv_dev->gadget_driver); + spin_lock(&priv_dev->lock); + + /*read again to check the actual speed*/ + speed = cdns3_get_speed(priv_dev); + priv_dev->gadget.speed = speed; + cdns3_hw_reset_eps_config(priv_dev); + cdns3_ep0_config(priv_dev); + } + } +} + +/** + * cdns3_device_irq_handler- interrupt handler for device part of controller + * + * @irq: irq number for cdns3 core device + * @data: structure of cdns3 + * + * Returns IRQ_HANDLED or IRQ_NONE + */ +static irqreturn_t cdns3_device_irq_handler(int irq, void *data) +{ + struct cdns3_device *priv_dev; + struct cdns3 *cdns = data; + irqreturn_t ret = IRQ_NONE; + u32 reg; + + priv_dev = cdns->gadget_dev; + + /* check USB device interrupt */ + reg = readl(&priv_dev->regs->usb_ists); + if (reg) { + /* After masking interrupts the new interrupts won't be + * reported in usb_ists/ep_ists. In order to not lose some + * of them driver disables only detected interrupts. + * They will be enabled ASAP after clearing source of + * interrupt. This an unusual behavior only applies to + * usb_ists register. + */ + reg = ~reg & readl(&priv_dev->regs->usb_ien); + /* mask deferred interrupt. */ + writel(reg, &priv_dev->regs->usb_ien); + ret = IRQ_WAKE_THREAD; + } + + /* check endpoint interrupt */ + reg = readl(&priv_dev->regs->ep_ists); + if (reg) { + writel(0, &priv_dev->regs->ep_ien); + ret = IRQ_WAKE_THREAD; + } + + return ret; +} + +/** + * cdns3_device_thread_irq_handler- interrupt handler for device part + * of controller + * + * @irq: irq number for cdns3 core device + * @data: structure of cdns3 + * + * Returns IRQ_HANDLED or IRQ_NONE + */ +static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data) +{ + struct cdns3_device *priv_dev; + struct cdns3 *cdns = data; + irqreturn_t ret = IRQ_NONE; + unsigned long flags; + int bit; + u32 reg; + + priv_dev = cdns->gadget_dev; + spin_lock_irqsave(&priv_dev->lock, flags); + + reg = readl(&priv_dev->regs->usb_ists); + if (reg) { + writel(reg, &priv_dev->regs->usb_ists); + writel(USB_IEN_INIT, &priv_dev->regs->usb_ien); + cdns3_check_usb_interrupt_proceed(priv_dev, reg); + ret = IRQ_HANDLED; + } + + reg = readl(&priv_dev->regs->ep_ists); + + /* handle default endpoint OUT */ + if (reg & EP_ISTS_EP_OUT0) { + cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_OUT); + ret = IRQ_HANDLED; + } + + /* handle default endpoint IN */ + if (reg & EP_ISTS_EP_IN0) { + cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_IN); + ret = IRQ_HANDLED; + } + + /* check if interrupt from non default endpoint, if no exit */ + reg &= ~(EP_ISTS_EP_OUT0 | EP_ISTS_EP_IN0); + if (!reg) + goto irqend; + + for_each_set_bit(bit, (unsigned long *)®, + sizeof(u32) * BITS_PER_BYTE) { + cdns3_check_ep_interrupt_proceed(priv_dev->eps[bit]); + ret = IRQ_HANDLED; + } + +irqend: + writel(~0, &priv_dev->regs->ep_ien); + spin_unlock_irqrestore(&priv_dev->lock, flags); + + return ret; +} + +/** + * cdns3_ep_onchip_buffer_reserve - Try to reserve onchip buf for EP + * + * The real reservation will occur during write to EP_CFG register, + * this function is used to check if the 'size' reservation is allowed. + * + * @priv_dev: extended gadget object + * @size: the size (KB) for EP would like to allocate + * @is_in: endpoint direction + * + * Return 0 if the required size can met or negative value on failure + */ +static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev, + int size, int is_in) +{ + int remained; + + /* 2KB are reserved for EP0*/ + remained = priv_dev->onchip_buffers - priv_dev->onchip_used_size - 2; + + if (is_in) { + if (remained < size) + return -EPERM; + + priv_dev->onchip_used_size += size; + } else { + int required; + + /** + * ALL OUT EPs are shared the same chunk onchip memory, so + * driver checks if it already has assigned enough buffers + */ + if (priv_dev->out_mem_is_allocated >= size) + return 0; + + required = size - priv_dev->out_mem_is_allocated; + + if (required > remained) + return -EPERM; + + priv_dev->out_mem_is_allocated += required; + priv_dev->onchip_used_size += required; + } + + return 0; +} + +void cdns3_configure_dmult(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep) +{ + struct cdns3_usb_regs __iomem *regs = priv_dev->regs; + + /* For dev_ver > DEV_VER_V2 DMULT is configured per endpoint */ + if (priv_dev->dev_ver <= DEV_VER_V2) + writel(USB_CONF_DMULT, ®s->usb_conf); + + if (priv_dev->dev_ver == DEV_VER_V2) + writel(USB_CONF2_EN_TDL_TRB, ®s->usb_conf2); + + if (priv_dev->dev_ver >= DEV_VER_V3 && priv_ep) { + u32 mask; + + if (priv_ep->dir) + mask = BIT(priv_ep->num + 16); + else + mask = BIT(priv_ep->num); + + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) { + cdns3_set_register_bit(®s->tdl_from_trb, mask); + cdns3_set_register_bit(®s->tdl_beh, mask); + cdns3_set_register_bit(®s->tdl_beh2, mask); + cdns3_set_register_bit(®s->dma_adv_td, mask); + } + + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) + cdns3_set_register_bit(®s->tdl_from_trb, mask); + + cdns3_set_register_bit(®s->dtrans, mask); + } +} + +/** + * cdns3_ep_config Configure hardware endpoint + * @priv_ep: extended endpoint object + */ +void cdns3_ep_config(struct cdns3_endpoint *priv_ep) +{ + bool is_iso_ep = (priv_ep->type == USB_ENDPOINT_XFER_ISOC); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + u32 bEndpointAddress = priv_ep->num | priv_ep->dir; + u32 max_packet_size = 0; + u8 maxburst = 0; + u32 ep_cfg = 0; + u8 buffering; + u8 mult = 0; + int ret; + + buffering = CDNS3_EP_BUF_SIZE - 1; + + cdns3_configure_dmult(priv_dev, priv_ep); + + switch (priv_ep->type) { + case USB_ENDPOINT_XFER_INT: + ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT); + + if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) || + priv_dev->dev_ver > DEV_VER_V2) + ep_cfg |= EP_CFG_TDL_CHK; + break; + case USB_ENDPOINT_XFER_BULK: + ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK); + + if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) || + priv_dev->dev_ver > DEV_VER_V2) + ep_cfg |= EP_CFG_TDL_CHK; + break; + default: + ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC); + mult = CDNS3_EP_ISO_HS_MULT - 1; + buffering = mult + 1; + } + + switch (priv_dev->gadget.speed) { + case USB_SPEED_FULL: + max_packet_size = is_iso_ep ? 1023 : 64; + break; + case USB_SPEED_HIGH: + max_packet_size = is_iso_ep ? 1024 : 512; + break; + case USB_SPEED_SUPER: + /* It's limitation that driver assumes in driver. */ + mult = 0; + max_packet_size = 1024; + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) { + maxburst = CDNS3_EP_ISO_SS_BURST - 1; + buffering = (mult + 1) * + (maxburst + 1); + + if (priv_ep->interval > 1) + buffering++; + } else { + maxburst = CDNS3_EP_BUF_SIZE - 1; + } + break; + default: + /* all other speed are not supported */ + return; + } + + if (max_packet_size == 1024) + priv_ep->trb_burst_size = 128; + else if (max_packet_size >= 512) + priv_ep->trb_burst_size = 64; + else + priv_ep->trb_burst_size = 16; + + ret = cdns3_ep_onchip_buffer_reserve(priv_dev, buffering + 1, + !!priv_ep->dir); + if (ret) { + dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n"); + return; + } + + ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) | + EP_CFG_MULT(mult) | + EP_CFG_BUFFERING(buffering) | + EP_CFG_MAXBURST(maxburst); + + cdns3_select_ep(priv_dev, bEndpointAddress); + writel(ep_cfg, &priv_dev->regs->ep_cfg); + + dev_dbg(priv_dev->dev, "Configure %s: with val %08x\n", + priv_ep->name, ep_cfg); +} + +/* Find correct direction for HW endpoint according to description */ +static int cdns3_ep_dir_is_correct(struct usb_endpoint_descriptor *desc, + struct cdns3_endpoint *priv_ep) +{ + return (priv_ep->endpoint.caps.dir_in && usb_endpoint_dir_in(desc)) || + (priv_ep->endpoint.caps.dir_out && usb_endpoint_dir_out(desc)); +} + +static struct +cdns3_endpoint *cdns3_find_available_ep(struct cdns3_device *priv_dev, + struct usb_endpoint_descriptor *desc) +{ + struct usb_ep *ep; + struct cdns3_endpoint *priv_ep; + + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) { + unsigned long num; + int ret; + /* ep name pattern likes epXin or epXout */ + char c[2] = {ep->name[2], '\0'}; + + ret = kstrtoul(c, 10, &num); + if (ret) + return ERR_PTR(ret); + + priv_ep = ep_to_cdns3_ep(ep); + if (cdns3_ep_dir_is_correct(desc, priv_ep)) { + if (!(priv_ep->flags & EP_CLAIMED)) { + priv_ep->num = num; + return priv_ep; + } + } + } + + return ERR_PTR(-ENOENT); +} + +/* + * Cadence IP has one limitation that all endpoints must be configured + * (Type & MaxPacketSize) before setting configuration through hardware + * register, it means we can't change endpoints configuration after + * set_configuration. + * + * This function set EP_CLAIMED flag which is added when the gadget driver + * uses usb_ep_autoconfig to configure specific endpoint; + * When the udc driver receives set_configurion request, + * it goes through all claimed endpoints, and configure all endpoints + * accordingly. + * + * At usb_ep_ops.enable/disable, we only enable and disable endpoint through + * ep_cfg register which can be changed after set_configuration, and do + * some software operation accordingly. + */ +static struct +usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *comp_desc) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + struct cdns3_endpoint *priv_ep; + unsigned long flags; + + priv_ep = cdns3_find_available_ep(priv_dev, desc); + if (IS_ERR(priv_ep)) { + dev_err(priv_dev->dev, "no available ep\n"); + return NULL; + } + + dev_dbg(priv_dev->dev, "match endpoint: %s\n", priv_ep->name); + + spin_lock_irqsave(&priv_dev->lock, flags); + priv_ep->endpoint.desc = desc; + priv_ep->dir = usb_endpoint_dir_in(desc) ? USB_DIR_IN : USB_DIR_OUT; + priv_ep->type = usb_endpoint_type(desc); + priv_ep->flags |= EP_CLAIMED; + priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0; + + spin_unlock_irqrestore(&priv_dev->lock, flags); + return &priv_ep->endpoint; +} + +/** + * cdns3_gadget_ep_alloc_request Allocates request + * @ep: endpoint object associated with request + * @gfp_flags: gfp flags + * + * Returns allocated request address, NULL on allocation error + */ +struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_request *priv_req; + + priv_req = kzalloc(sizeof(*priv_req), gfp_flags); + if (!priv_req) + return NULL; + + priv_req->priv_ep = priv_ep; + + trace_cdns3_alloc_request(priv_req); + return &priv_req->request; +} + +/** + * cdns3_gadget_ep_free_request Free memory occupied by request + * @ep: endpoint object associated with request + * @request: request to free memory + */ +void cdns3_gadget_ep_free_request(struct usb_ep *ep, + struct usb_request *request) +{ + struct cdns3_request *priv_req = to_cdns3_request(request); + + if (priv_req->aligned_buf) + priv_req->aligned_buf->in_use = 0; + + trace_cdns3_free_request(priv_req); + kfree(priv_req); +} + +/** + * cdns3_gadget_ep_enable Enable endpoint + * @ep: endpoint object + * @desc: endpoint descriptor + * + * Returns 0 on success, error code elsewhere + */ +static int cdns3_gadget_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct cdns3_endpoint *priv_ep; + struct cdns3_device *priv_dev; + u32 reg = EP_STS_EN_TRBERREN; + u32 bEndpointAddress; + unsigned long flags; + int enable = 1; + int ret; + int val; + + priv_ep = ep_to_cdns3_ep(ep); + priv_dev = priv_ep->cdns3_dev; + + if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + dev_dbg(priv_dev->dev, "usbss: invalid parameters\n"); + return -EINVAL; + } + + if (!desc->wMaxPacketSize) { + dev_err(priv_dev->dev, "usbss: missing wMaxPacketSize\n"); + return -EINVAL; + } + + if (dev_WARN_ONCE(priv_dev->dev, priv_ep->flags & EP_ENABLED, + "%s is already enabled\n", priv_ep->name)) + return 0; + + spin_lock_irqsave(&priv_dev->lock, flags); + + priv_ep->endpoint.desc = desc; + priv_ep->type = usb_endpoint_type(desc); + priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0; + + if (priv_ep->interval > ISO_MAX_INTERVAL && + priv_ep->type == USB_ENDPOINT_XFER_ISOC) { + dev_err(priv_dev->dev, "Driver is limited to %d period\n", + ISO_MAX_INTERVAL); + + ret = -EINVAL; + goto exit; + } + + ret = cdns3_allocate_trb_pool(priv_ep); + + if (ret) + goto exit; + + bEndpointAddress = priv_ep->num | priv_ep->dir; + cdns3_select_ep(priv_dev, bEndpointAddress); + + trace_cdns3_gadget_ep_enable(priv_ep); + + writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd); + + ret = readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val, + !(val & (EP_CMD_CSTALL | EP_CMD_EPRST)), + 1, 1000); + + if (unlikely(ret)) { + cdns3_free_trb_pool(priv_ep); + ret = -EINVAL; + goto exit; + } + + /* enable interrupt for selected endpoint */ + cdns3_set_register_bit(&priv_dev->regs->ep_ien, + BIT(cdns3_ep_addr_to_index(bEndpointAddress))); + + if (priv_dev->dev_ver < DEV_VER_V2) + cdns3_wa2_enable_detection(priv_dev, priv_ep, reg); + + writel(reg, &priv_dev->regs->ep_sts_en); + + /* + * For some versions of controller at some point during ISO OUT traffic + * DMA reads Transfer Ring for the EP which has never got doorbell. + * This issue was detected only on simulation, but to avoid this issue + * driver add protection against it. To fix it driver enable ISO OUT + * endpoint before setting DRBL. This special treatment of ISO OUT + * endpoints are recommended by controller specification. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) + enable = 0; + + if (enable) + cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_ENABLE); + + ep->desc = desc; + priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALLED | EP_STALL_PENDING | + EP_QUIRK_ISO_OUT_EN | EP_QUIRK_EXTRA_BUF_EN); + priv_ep->flags |= EP_ENABLED | EP_UPDATE_EP_TRBADDR; + priv_ep->wa1_set = 0; + priv_ep->enqueue = 0; + priv_ep->dequeue = 0; + reg = readl(&priv_dev->regs->ep_sts); + priv_ep->pcs = !!EP_STS_CCS(reg); + priv_ep->ccs = !!EP_STS_CCS(reg); + /* one TRB is reserved for link TRB used in DMULT mode*/ + priv_ep->free_trbs = priv_ep->num_trbs - 1; +exit: + spin_unlock_irqrestore(&priv_dev->lock, flags); + + return ret; +} + +/** + * cdns3_gadget_ep_disable Disable endpoint + * @ep: endpoint object + * + * Returns 0 on success, error code elsewhere + */ +static int cdns3_gadget_ep_disable(struct usb_ep *ep) +{ + struct cdns3_endpoint *priv_ep; + struct cdns3_request *priv_req; + struct cdns3_device *priv_dev; + struct usb_request *request; + unsigned long flags; + int ret = 0; + u32 ep_cfg; + int val; + + if (!ep) { + pr_err("usbss: invalid parameters\n"); + return -EINVAL; + } + + priv_ep = ep_to_cdns3_ep(ep); + priv_dev = priv_ep->cdns3_dev; + + if (dev_WARN_ONCE(priv_dev->dev, !(priv_ep->flags & EP_ENABLED), + "%s is already disabled\n", priv_ep->name)) + return 0; + + spin_lock_irqsave(&priv_dev->lock, flags); + + trace_cdns3_gadget_ep_disable(priv_ep); + + cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress); + + ep_cfg = readl(&priv_dev->regs->ep_cfg); + ep_cfg &= ~EP_CFG_ENABLE; + writel(ep_cfg, &priv_dev->regs->ep_cfg); + + /** + * Driver needs some time before resetting endpoint. + * It need waits for clearing DBUSY bit or for timeout expired. + * 10us is enough time for controller to stop transfer. + */ + readl_poll_timeout_atomic(&priv_dev->regs->ep_sts, val, + !(val & EP_STS_DBUSY), 1, 10); + writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd); + + readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val, + !(val & (EP_CMD_CSTALL | EP_CMD_EPRST)), + 1, 1000); + if (unlikely(ret)) + dev_err(priv_dev->dev, "Timeout: %s resetting failed.\n", + priv_ep->name); + + while (!list_empty(&priv_ep->pending_req_list)) { + request = cdns3_next_request(&priv_ep->pending_req_list); + + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), + -ESHUTDOWN); + } + + while (!list_empty(&priv_ep->wa2_descmiss_req_list)) { + priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list); + + kfree(priv_req->request.buf); + cdns3_gadget_ep_free_request(&priv_ep->endpoint, + &priv_req->request); + list_del_init(&priv_req->list); + --priv_ep->wa2_counter; + } + + while (!list_empty(&priv_ep->deferred_req_list)) { + request = cdns3_next_request(&priv_ep->deferred_req_list); + + cdns3_gadget_giveback(priv_ep, to_cdns3_request(request), + -ESHUTDOWN); + } + + priv_ep->descmis_req = NULL; + + ep->desc = NULL; + priv_ep->flags &= ~EP_ENABLED; + + spin_unlock_irqrestore(&priv_dev->lock, flags); + + return ret; +} + +/** + * cdns3_gadget_ep_queue Transfer data on endpoint + * @ep: endpoint object + * @request: request object + * @gfp_flags: gfp flags + * + * Returns 0 on success, error code elsewhere + */ +static int __cdns3_gadget_ep_queue(struct usb_ep *ep, + struct usb_request *request, + gfp_t gfp_flags) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct cdns3_request *priv_req; + int ret = 0; + + request->actual = 0; + request->status = -EINPROGRESS; + priv_req = to_cdns3_request(request); + trace_cdns3_ep_queue(priv_req); + + if (priv_dev->dev_ver < DEV_VER_V2) { + ret = cdns3_wa2_gadget_ep_queue(priv_dev, priv_ep, + priv_req); + + if (ret == EINPROGRESS) + return 0; + } + + ret = cdns3_prepare_aligned_request_buf(priv_req); + if (ret < 0) + return ret; + + ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request, + usb_endpoint_dir_in(ep->desc)); + if (ret) + return ret; + + list_add_tail(&request->list, &priv_ep->deferred_req_list); + + /* + * If hardware endpoint configuration has not been set yet then + * just queue request in deferred list. Transfer will be started in + * cdns3_set_hw_configuration. + */ + if (priv_dev->hw_configured_flag && !(priv_ep->flags & EP_STALLED) && + !(priv_ep->flags & EP_STALL_PENDING)) + cdns3_start_all_request(priv_dev, priv_ep); + + return 0; +} + +static int cdns3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request, + gfp_t gfp_flags) +{ + struct usb_request *zlp_request; + struct cdns3_endpoint *priv_ep; + struct cdns3_device *priv_dev; + unsigned long flags; + int ret; + + if (!request || !ep) + return -EINVAL; + + priv_ep = ep_to_cdns3_ep(ep); + priv_dev = priv_ep->cdns3_dev; + + spin_lock_irqsave(&priv_dev->lock, flags); + + ret = __cdns3_gadget_ep_queue(ep, request, gfp_flags); + + if (ret == 0 && request->zero && request->length && + (request->length % ep->maxpacket == 0)) { + struct cdns3_request *priv_req; + + zlp_request = cdns3_gadget_ep_alloc_request(ep, GFP_ATOMIC); + zlp_request->buf = priv_dev->zlp_buf; + zlp_request->length = 0; + + priv_req = to_cdns3_request(zlp_request); + priv_req->flags |= REQUEST_ZLP; + + dev_dbg(priv_dev->dev, "Queuing ZLP for endpoint: %s\n", + priv_ep->name); + ret = __cdns3_gadget_ep_queue(ep, zlp_request, gfp_flags); + } + + spin_unlock_irqrestore(&priv_dev->lock, flags); + return ret; +} + +/** + * cdns3_gadget_ep_dequeue Remove request from transfer queue + * @ep: endpoint object associated with request + * @request: request object + * + * Returns 0 on success, error code elsewhere + */ +int cdns3_gadget_ep_dequeue(struct usb_ep *ep, + struct usb_request *request) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct usb_request *req, *req_temp; + struct cdns3_request *priv_req; + struct cdns3_trb *link_trb; + unsigned long flags; + int ret = 0; + + if (!ep || !request || !ep->desc) + return -EINVAL; + + spin_lock_irqsave(&priv_dev->lock, flags); + + priv_req = to_cdns3_request(request); + + trace_cdns3_ep_dequeue(priv_req); + + cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress); + + list_for_each_entry_safe(req, req_temp, &priv_ep->pending_req_list, + list) { + if (request == req) + goto found; + } + + list_for_each_entry_safe(req, req_temp, &priv_ep->deferred_req_list, + list) { + if (request == req) + goto found; + } + + goto not_found; + +found: + + if (priv_ep->wa1_trb == priv_req->trb) + cdns3_wa1_restore_cycle_bit(priv_ep); + + link_trb = priv_req->trb; + cdns3_move_deq_to_next_trb(priv_req); + cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET); + + /* Update ring */ + request = cdns3_next_request(&priv_ep->deferred_req_list); + if (request) { + priv_req = to_cdns3_request(request); + + link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma + + (priv_req->start_trb * TRB_SIZE)); + link_trb->control = (link_trb->control & TRB_CYCLE) | + TRB_TYPE(TRB_LINK) | TRB_CHAIN | TRB_TOGGLE; + } else { + priv_ep->flags |= EP_UPDATE_EP_TRBADDR; + } + +not_found: + spin_unlock_irqrestore(&priv_dev->lock, flags); + return ret; +} + +/** + * __cdns3_gadget_ep_set_halt Sets stall on selected endpoint + * Should be called after acquiring spin_lock and selecting ep + * @ep: endpoint object to set stall on. + */ +void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + + trace_cdns3_halt(priv_ep, 1, 0); + + if (!(priv_ep->flags & EP_STALLED)) { + u32 ep_sts_reg = readl(&priv_dev->regs->ep_sts); + + if (!(ep_sts_reg & EP_STS_DBUSY)) + cdns3_ep_stall_flush(priv_ep); + else + priv_ep->flags |= EP_STALL_PENDING; + } +} + +/** + * __cdns3_gadget_ep_clear_halt Clears stall on selected endpoint + * Should be called after acquiring spin_lock and selecting ep + * @ep: endpoint object to clear stall on + */ +int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep) +{ + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + struct usb_request *request; + int ret; + int val; + + trace_cdns3_halt(priv_ep, 0, 0); + + writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd); + + /* wait for EPRST cleared */ + ret = readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val, + !(val & EP_CMD_EPRST), 1, 100); + if (ret) + return -EINVAL; + + priv_ep->flags &= ~(EP_STALLED | EP_STALL_PENDING); + + request = cdns3_next_request(&priv_ep->pending_req_list); + + if (request) + cdns3_rearm_transfer(priv_ep, 1); + + cdns3_start_all_request(priv_dev, priv_ep); + return ret; +} + +/** + * cdns3_gadget_ep_set_halt Sets/clears stall on selected endpoint + * @ep: endpoint object to set/clear stall on + * @value: 1 for set stall, 0 for clear stall + * + * Returns 0 on success, error code elsewhere + */ +int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value) +{ + struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep); + struct cdns3_device *priv_dev = priv_ep->cdns3_dev; + unsigned long flags; + int ret = 0; + + if (!(priv_ep->flags & EP_ENABLED)) + return -EPERM; + + spin_lock_irqsave(&priv_dev->lock, flags); + + cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress); + + if (!value) { + priv_ep->flags &= ~EP_WEDGE; + ret = __cdns3_gadget_ep_clear_halt(priv_ep); + } else { + __cdns3_gadget_ep_set_halt(priv_ep); + } + + spin_unlock_irqrestore(&priv_dev->lock, flags); + + return ret; +} + +extern const struct usb_ep_ops cdns3_gadget_ep0_ops; + +static const struct usb_ep_ops cdns3_gadget_ep_ops = { + .enable = cdns3_gadget_ep_enable, + .disable = cdns3_gadget_ep_disable, + .alloc_request = cdns3_gadget_ep_alloc_request, + .free_request = cdns3_gadget_ep_free_request, + .queue = cdns3_gadget_ep_queue, + .dequeue = cdns3_gadget_ep_dequeue, + .set_halt = cdns3_gadget_ep_set_halt, + .set_wedge = cdns3_gadget_ep_set_wedge, +}; + +/** + * cdns3_gadget_get_frame Returns number of actual ITP frame + * @gadget: gadget object + * + * Returns number of actual ITP frame + */ +static int cdns3_gadget_get_frame(struct usb_gadget *gadget) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + + return readl(&priv_dev->regs->usb_itpn); +} + +int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev) +{ + enum usb_device_speed speed; + + speed = cdns3_get_speed(priv_dev); + + if (speed >= USB_SPEED_SUPER) + return 0; + + /* Start driving resume signaling to indicate remote wakeup. */ + writel(USB_CONF_LGO_L0, &priv_dev->regs->usb_conf); + + return 0; +} + +static int cdns3_gadget_wakeup(struct usb_gadget *gadget) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&priv_dev->lock, flags); + ret = __cdns3_gadget_wakeup(priv_dev); + spin_unlock_irqrestore(&priv_dev->lock, flags); + return ret; +} + +static int cdns3_gadget_set_selfpowered(struct usb_gadget *gadget, + int is_selfpowered) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + unsigned long flags; + + spin_lock_irqsave(&priv_dev->lock, flags); + priv_dev->is_selfpowered = !!is_selfpowered; + spin_unlock_irqrestore(&priv_dev->lock, flags); + return 0; +} + +static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + + if (is_on) + writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf); + else + writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf); + + return 0; +} + +static void cdns3_gadget_config(struct cdns3_device *priv_dev) +{ + struct cdns3_usb_regs __iomem *regs = priv_dev->regs; + u32 reg; + + cdns3_ep0_config(priv_dev); + + /* enable interrupts for endpoint 0 (in and out) */ + writel(EP_IEN_EP_OUT0 | EP_IEN_EP_IN0, ®s->ep_ien); + + /* + * Driver needs to modify LFPS minimal U1 Exit time for DEV_VER_TI_V1 + * revision of controller. + */ + if (priv_dev->dev_ver == DEV_VER_TI_V1) { + reg = readl(®s->dbg_link1); + + reg &= ~DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK; + reg |= DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(0x55) | + DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET; + writel(reg, ®s->dbg_link1); + } + + /* + * By default some platforms has set protected access to memory. + * This cause problem with cache, so driver restore non-secure + * access to memory. + */ + reg = readl(®s->dma_axi_ctrl); + reg |= DMA_AXI_CTRL_MARPROT(DMA_AXI_CTRL_NON_SECURE) | + DMA_AXI_CTRL_MAWPROT(DMA_AXI_CTRL_NON_SECURE); + writel(reg, ®s->dma_axi_ctrl); + + /* enable generic interrupt*/ + writel(USB_IEN_INIT, ®s->usb_ien); + writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, ®s->usb_conf); + + cdns3_configure_dmult(priv_dev, NULL); + + cdns3_gadget_pullup(&priv_dev->gadget, 1); +} + +/** + * cdns3_gadget_udc_start Gadget start + * @gadget: gadget object + * @driver: driver which operates on this gadget + * + * Returns 0 on success, error code elsewhere + */ +static int cdns3_gadget_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + unsigned long flags; + + spin_lock_irqsave(&priv_dev->lock, flags); + priv_dev->gadget_driver = driver; + cdns3_gadget_config(priv_dev); + spin_unlock_irqrestore(&priv_dev->lock, flags); + return 0; +} + +/** + * cdns3_gadget_udc_stop Stops gadget + * @gadget: gadget object + * + * Returns 0 + */ +static int cdns3_gadget_udc_stop(struct usb_gadget *gadget) +{ + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget); + struct cdns3_endpoint *priv_ep; + u32 bEndpointAddress; + struct usb_ep *ep; + int ret = 0; + int val; + + priv_dev->gadget_driver = NULL; + + priv_dev->onchip_used_size = 0; + priv_dev->out_mem_is_allocated = 0; + priv_dev->gadget.speed = USB_SPEED_UNKNOWN; + + list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) { + priv_ep = ep_to_cdns3_ep(ep); + bEndpointAddress = priv_ep->num | priv_ep->dir; + cdns3_select_ep(priv_dev, bEndpointAddress); + writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd); + readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val, + !(val & EP_CMD_EPRST), 1, 100); + } + + /* disable interrupt for device */ + writel(0, &priv_dev->regs->usb_ien); + writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf); + + return ret; +} + +static const struct usb_gadget_ops cdns3_gadget_ops = { + .get_frame = cdns3_gadget_get_frame, + .wakeup = cdns3_gadget_wakeup, + .set_selfpowered = cdns3_gadget_set_selfpowered, + .pullup = cdns3_gadget_pullup, + .udc_start = cdns3_gadget_udc_start, + .udc_stop = cdns3_gadget_udc_stop, + .match_ep = cdns3_gadget_match_ep, +}; + +static void cdns3_free_all_eps(struct cdns3_device *priv_dev) +{ + int i; + + /* ep0 OUT point to ep0 IN. */ + priv_dev->eps[16] = NULL; + + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) + if (priv_dev->eps[i]) { + cdns3_free_trb_pool(priv_dev->eps[i]); + devm_kfree(priv_dev->dev, priv_dev->eps[i]); + } +} + +/** + * cdns3_init_eps Initializes software endpoints of gadget + * @cdns3: extended gadget object + * + * Returns 0 on success, error code elsewhere + */ +static int cdns3_init_eps(struct cdns3_device *priv_dev) +{ + u32 ep_enabled_reg, iso_ep_reg; + struct cdns3_endpoint *priv_ep; + int ep_dir, ep_number; + u32 ep_mask; + int ret = 0; + int i; + + /* Read it from USB_CAP3 to USB_CAP5 */ + ep_enabled_reg = readl(&priv_dev->regs->usb_cap3); + iso_ep_reg = readl(&priv_dev->regs->usb_cap4); + + dev_dbg(priv_dev->dev, "Initializing non-zero endpoints\n"); + + for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) { + ep_dir = i >> 4; /* i div 16 */ + ep_number = i & 0xF; /* i % 16 */ + ep_mask = BIT(i); + + if (!(ep_enabled_reg & ep_mask)) + continue; + + if (ep_dir && !ep_number) { + priv_dev->eps[i] = priv_dev->eps[0]; + continue; + } + + priv_ep = devm_kzalloc(priv_dev->dev, sizeof(*priv_ep), + GFP_KERNEL); + if (!priv_ep) + goto err; + + /* set parent of endpoint object */ + priv_ep->cdns3_dev = priv_dev; + priv_dev->eps[i] = priv_ep; + priv_ep->num = ep_number; + priv_ep->dir = ep_dir ? USB_DIR_IN : USB_DIR_OUT; + + if (!ep_number) { + ret = cdns3_init_ep0(priv_dev, priv_ep); + if (ret) { + dev_err(priv_dev->dev, "Failed to init ep0\n"); + goto err; + } + } else { + snprintf(priv_ep->name, sizeof(priv_ep->name), "ep%d%s", + ep_number, !!ep_dir ? "in" : "out"); + priv_ep->endpoint.name = priv_ep->name; + + usb_ep_set_maxpacket_limit(&priv_ep->endpoint, + CDNS3_EP_MAX_PACKET_LIMIT); + priv_ep->endpoint.max_streams = CDNS3_EP_MAX_STREAMS; + priv_ep->endpoint.ops = &cdns3_gadget_ep_ops; + if (ep_dir) + priv_ep->endpoint.caps.dir_in = 1; + else + priv_ep->endpoint.caps.dir_out = 1; + + if (iso_ep_reg & ep_mask) + priv_ep->endpoint.caps.type_iso = 1; + + priv_ep->endpoint.caps.type_bulk = 1; + priv_ep->endpoint.caps.type_int = 1; + + list_add_tail(&priv_ep->endpoint.ep_list, + &priv_dev->gadget.ep_list); + } + + priv_ep->flags = 0; + + dev_info(priv_dev->dev, "Initialized %s support: %s %s\n", + priv_ep->name, + priv_ep->endpoint.caps.type_bulk ? "BULK, INT" : "", + priv_ep->endpoint.caps.type_iso ? "ISO" : ""); + + INIT_LIST_HEAD(&priv_ep->pending_req_list); + INIT_LIST_HEAD(&priv_ep->deferred_req_list); + INIT_LIST_HEAD(&priv_ep->wa2_descmiss_req_list); + } + + return 0; +err: + cdns3_free_all_eps(priv_dev); + return -ENOMEM; +} + +void cdns3_gadget_exit(struct cdns3 *cdns) +{ + struct cdns3_device *priv_dev; + + priv_dev = cdns->gadget_dev; + + devm_free_irq(cdns->dev, cdns->dev_irq, cdns); + + pm_runtime_mark_last_busy(cdns->dev); + pm_runtime_put_autosuspend(cdns->dev); + + usb_del_gadget_udc(&priv_dev->gadget); + + cdns3_free_all_eps(priv_dev); + + while (!list_empty(&priv_dev->aligned_buf_list)) { + struct cdns3_aligned_buf *buf; + + buf = cdns3_next_align_buf(&priv_dev->aligned_buf_list); + dma_free_coherent(priv_dev->sysdev, buf->size, + buf->buf, + buf->dma); + + list_del(&buf->list); + kfree(buf); + } + + dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf, + priv_dev->setup_dma); + + kfree(priv_dev->zlp_buf); + kfree(priv_dev); + cdns->gadget_dev = NULL; + cdns3_drd_switch_gadget(cdns, 0); +} + +static int cdns3_gadget_start(struct cdns3 *cdns) +{ + struct cdns3_device *priv_dev; + u32 max_speed; + int ret; + + priv_dev = kzalloc(sizeof(*priv_dev), GFP_KERNEL); + if (!priv_dev) + return -ENOMEM; + + cdns->gadget_dev = priv_dev; + priv_dev->sysdev = cdns->dev; + priv_dev->dev = cdns->dev; + priv_dev->regs = cdns->dev_regs; + + device_property_read_u16(priv_dev->dev, "cdns,on-chip-buff-size", + &priv_dev->onchip_buffers); + + if (priv_dev->onchip_buffers <= 0) { + u32 reg = readl(&priv_dev->regs->usb_cap2); + + priv_dev->onchip_buffers = USB_CAP2_ACTUAL_MEM_SIZE(reg); + } + + if (!priv_dev->onchip_buffers) + priv_dev->onchip_buffers = 256; + + max_speed = usb_get_maximum_speed(cdns->dev); + + /* Check the maximum_speed parameter */ + switch (max_speed) { + case USB_SPEED_FULL: + writel(USB_CONF_SFORCE_FS, &priv_dev->regs->usb_conf); + break; + case USB_SPEED_HIGH: + writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf); + break; + case USB_SPEED_SUPER: + break; + default: + dev_err(cdns->dev, "invalid maximum_speed parameter %d\n", + max_speed); + /* fall through */ + case USB_SPEED_UNKNOWN: + /* default to superspeed */ + max_speed = USB_SPEED_SUPER; + break; + } + + /* fill gadget fields */ + priv_dev->gadget.max_speed = max_speed; + priv_dev->gadget.speed = USB_SPEED_UNKNOWN; + priv_dev->gadget.ops = &cdns3_gadget_ops; + priv_dev->gadget.name = "usb-ss-gadget"; + priv_dev->gadget.sg_supported = 1; + priv_dev->gadget.quirk_avoids_skb_reserve = 1; + + spin_lock_init(&priv_dev->lock); + INIT_WORK(&priv_dev->pending_status_wq, + cdns3_pending_setup_status_handler); + + INIT_WORK(&priv_dev->aligned_buf_wq, + cdns3_free_aligned_request_buf); + + /* initialize endpoint container */ + INIT_LIST_HEAD(&priv_dev->gadget.ep_list); + INIT_LIST_HEAD(&priv_dev->aligned_buf_list); + + ret = cdns3_init_eps(priv_dev); + if (ret) { + dev_err(priv_dev->dev, "Failed to create endpoints\n"); + goto err1; + } + + /* allocate memory for setup packet buffer */ + priv_dev->setup_buf = dma_alloc_coherent(priv_dev->sysdev, 8, + &priv_dev->setup_dma, GFP_DMA); + if (!priv_dev->setup_buf) { + ret = -ENOMEM; + goto err2; + } + + priv_dev->dev_ver = readl(&priv_dev->regs->usb_cap6); + + dev_dbg(priv_dev->dev, "Device Controller version: %08x\n", + readl(&priv_dev->regs->usb_cap6)); + dev_dbg(priv_dev->dev, "USB Capabilities:: %08x\n", + readl(&priv_dev->regs->usb_cap1)); + dev_dbg(priv_dev->dev, "On-Chip memory configuration: %08x\n", + readl(&priv_dev->regs->usb_cap2)); + + priv_dev->dev_ver = GET_DEV_BASE_VERSION(priv_dev->dev_ver); + + priv_dev->zlp_buf = kzalloc(CDNS3_EP_ZLP_BUF_SIZE, GFP_KERNEL); + if (!priv_dev->zlp_buf) { + ret = -ENOMEM; + goto err3; + } + + /* add USB gadget device */ + ret = usb_add_gadget_udc(priv_dev->dev, &priv_dev->gadget); + if (ret < 0) { + dev_err(priv_dev->dev, + "Failed to register USB device controller\n"); + goto err4; + } + + return 0; +err4: + kfree(priv_dev->zlp_buf); +err3: + dma_free_coherent(priv_dev->sysdev, 8, priv_dev->setup_buf, + priv_dev->setup_dma); +err2: + cdns3_free_all_eps(priv_dev); +err1: + cdns->gadget_dev = NULL; + return ret; +} + +static int __cdns3_gadget_init(struct cdns3 *cdns) +{ + int ret = 0; + + cdns3_drd_switch_gadget(cdns, 1); + pm_runtime_get_sync(cdns->dev); + + ret = cdns3_gadget_start(cdns); + if (ret) + return ret; + + /* + * Because interrupt line can be shared with other components in + * driver it can't use IRQF_ONESHOT flag here. + */ + ret = devm_request_threaded_irq(cdns->dev, cdns->dev_irq, + cdns3_device_irq_handler, + cdns3_device_thread_irq_handler, + IRQF_SHARED, dev_name(cdns->dev), cdns); + + if (ret) + goto err0; + + return 0; +err0: + cdns3_gadget_exit(cdns); + return ret; +} + +static int cdns3_gadget_suspend(struct cdns3 *cdns, bool do_wakeup) +{ + struct cdns3_device *priv_dev = cdns->gadget_dev; + + cdns3_disconnect_gadget(priv_dev); + + priv_dev->gadget.speed = USB_SPEED_UNKNOWN; + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED); + cdns3_hw_reset_eps_config(priv_dev); + + /* disable interrupt for device */ + writel(0, &priv_dev->regs->usb_ien); + + cdns3_gadget_pullup(&priv_dev->gadget, 0); + + return 0; +} + +static int cdns3_gadget_resume(struct cdns3 *cdns, bool hibernated) +{ + struct cdns3_device *priv_dev = cdns->gadget_dev; + + if (!priv_dev->gadget_driver) + return 0; + + cdns3_gadget_config(priv_dev); + + return 0; +} + +/** + * cdns3_gadget_init - initialize device structure + * + * cdns: cdns3 instance + * + * This function initializes the gadget. + */ +int cdns3_gadget_init(struct cdns3 *cdns) +{ + struct cdns3_role_driver *rdrv; + + rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL); + if (!rdrv) + return -ENOMEM; + + rdrv->start = __cdns3_gadget_init; + rdrv->stop = cdns3_gadget_exit; + rdrv->suspend = cdns3_gadget_suspend; + rdrv->resume = cdns3_gadget_resume; + rdrv->state = CDNS3_ROLE_STATE_INACTIVE; + rdrv->name = "gadget"; + cdns->roles[USB_ROLE_DEVICE] = rdrv; + + return 0; +} diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h new file mode 100644 index 000000000000..bc4024041ef2 --- /dev/null +++ b/drivers/usb/cdns3/gadget.h @@ -0,0 +1,1338 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * USBSS device controller driver header file + * + * Copyright (C) 2018-2019 Cadence. + * Copyright (C) 2017-2018 NXP + * + * Author: Pawel Laszczak <pawell@cadence.com> + * Pawel Jez <pjez@cadence.com> + * Peter Chen <peter.chen@nxp.com> + */ +#ifndef __LINUX_CDNS3_GADGET +#define __LINUX_CDNS3_GADGET +#include <linux/usb/gadget.h> + +/* + * USBSS-DEV register interface. + * This corresponds to the USBSS Device Controller Interface + */ + +/** + * struct cdns3_usb_regs - device controller registers. + * @usb_conf: Global Configuration. + * @usb_sts: Global Status. + * @usb_cmd: Global Command. + * @usb_itpn: ITP/SOF number. + * @usb_lpm: Global Command. + * @usb_ien: USB Interrupt Enable. + * @usb_ists: USB Interrupt Status. + * @ep_sel: Endpoint Select. + * @ep_traddr: Endpoint Transfer Ring Address. + * @ep_cfg: Endpoint Configuration. + * @ep_cmd: Endpoint Command. + * @ep_sts: Endpoint Status. + * @ep_sts_sid: Endpoint Status. + * @ep_sts_en: Endpoint Status Enable. + * @drbl: Doorbell. + * @ep_ien: EP Interrupt Enable. + * @ep_ists: EP Interrupt Status. + * @usb_pwr: Global Power Configuration. + * @usb_conf2: Global Configuration 2. + * @usb_cap1: Capability 1. + * @usb_cap2: Capability 2. + * @usb_cap3: Capability 3. + * @usb_cap4: Capability 4. + * @usb_cap5: Capability 5. + * @usb_cap6: Capability 6. + * @usb_cpkt1: Custom Packet 1. + * @usb_cpkt2: Custom Packet 2. + * @usb_cpkt3: Custom Packet 3. + * @ep_dma_ext_addr: Upper address for DMA operations. + * @buf_addr: Address for On-chip Buffer operations. + * @buf_data: Data for On-chip Buffer operations. + * @buf_ctrl: On-chip Buffer Access Control. + * @dtrans: DMA Transfer Mode. + * @tdl_from_trb: Source of TD Configuration. + * @tdl_beh: TDL Behavior Configuration. + * @ep_tdl: Endpoint TDL. + * @tdl_beh2: TDL Behavior 2 Configuration. + * @dma_adv_td: DMA Advance TD Configuration. + * @reserved1: Reserved. + * @cfg_regs: Configuration. + * @reserved2: Reserved. + * @dma_axi_ctrl: AXI Control. + * @dma_axi_id: AXI ID register. + * @dma_axi_cap: AXI Capability. + * @dma_axi_ctrl0: AXI Control 0. + * @dma_axi_ctrl1: AXI Control 1. + */ +struct cdns3_usb_regs { + __le32 usb_conf; + __le32 usb_sts; + __le32 usb_cmd; + __le32 usb_itpn; + __le32 usb_lpm; + __le32 usb_ien; + __le32 usb_ists; + __le32 ep_sel; + __le32 ep_traddr; + __le32 ep_cfg; + __le32 ep_cmd; + __le32 ep_sts; + __le32 ep_sts_sid; + __le32 ep_sts_en; + __le32 drbl; + __le32 ep_ien; + __le32 ep_ists; + __le32 usb_pwr; + __le32 usb_conf2; + __le32 usb_cap1; + __le32 usb_cap2; + __le32 usb_cap3; + __le32 usb_cap4; + __le32 usb_cap5; + __le32 usb_cap6; + __le32 usb_cpkt1; + __le32 usb_cpkt2; + __le32 usb_cpkt3; + __le32 ep_dma_ext_addr; + __le32 buf_addr; + __le32 buf_data; + __le32 buf_ctrl; + __le32 dtrans; + __le32 tdl_from_trb; + __le32 tdl_beh; + __le32 ep_tdl; + __le32 tdl_beh2; + __le32 dma_adv_td; + __le32 reserved1[26]; + __le32 cfg_reg1; + __le32 dbg_link1; + __le32 dbg_link2; + __le32 cfg_regs[74]; + __le32 reserved2[51]; + __le32 dma_axi_ctrl; + __le32 dma_axi_id; + __le32 dma_axi_cap; + __le32 dma_axi_ctrl0; + __le32 dma_axi_ctrl1; +}; + +/* USB_CONF - bitmasks */ +/* Reset USB device configuration. */ +#define USB_CONF_CFGRST BIT(0) +/* Set Configuration. */ +#define USB_CONF_CFGSET BIT(1) +/* Disconnect USB device in SuperSpeed. */ +#define USB_CONF_USB3DIS BIT(3) +/* Disconnect USB device in HS/FS */ +#define USB_CONF_USB2DIS BIT(4) +/* Little Endian access - default */ +#define USB_CONF_LENDIAN BIT(5) +/* + * Big Endian access. Driver assume that byte order for + * SFRs access always is as Little Endian so this bit + * is not used. + */ +#define USB_CONF_BENDIAN BIT(6) +/* Device software reset. */ +#define USB_CONF_SWRST BIT(7) +/* Singular DMA transfer mode. Only for VER < DEV_VER_V3*/ +#define USB_CONF_DSING BIT(8) +/* Multiple DMA transfers mode. Only for VER < DEV_VER_V3 */ +#define USB_CONF_DMULT BIT(9) +/* DMA clock turn-off enable. */ +#define USB_CONF_DMAOFFEN BIT(10) +/* DMA clock turn-off disable. */ +#define USB_CONF_DMAOFFDS BIT(11) +/* Clear Force Full Speed. */ +#define USB_CONF_CFORCE_FS BIT(12) +/* Set Force Full Speed. */ +#define USB_CONF_SFORCE_FS BIT(13) +/* Device enable. */ +#define USB_CONF_DEVEN BIT(14) +/* Device disable. */ +#define USB_CONF_DEVDS BIT(15) +/* L1 LPM state entry enable (used in HS/FS mode). */ +#define USB_CONF_L1EN BIT(16) +/* L1 LPM state entry disable (used in HS/FS mode). */ +#define USB_CONF_L1DS BIT(17) +/* USB 2.0 clock gate disable. */ +#define USB_CONF_CLK2OFFEN BIT(18) +/* USB 2.0 clock gate enable. */ +#define USB_CONF_CLK2OFFDS BIT(19) +/* L0 LPM state entry request (used in HS/FS mode). */ +#define USB_CONF_LGO_L0 BIT(20) +/* USB 3.0 clock gate disable. */ +#define USB_CONF_CLK3OFFEN BIT(21) +/* USB 3.0 clock gate enable. */ +#define USB_CONF_CLK3OFFDS BIT(22) +/* Bit 23 is reserved*/ +/* U1 state entry enable (used in SS mode). */ +#define USB_CONF_U1EN BIT(24) +/* U1 state entry disable (used in SS mode). */ +#define USB_CONF_U1DS BIT(25) +/* U2 state entry enable (used in SS mode). */ +#define USB_CONF_U2EN BIT(26) +/* U2 state entry disable (used in SS mode). */ +#define USB_CONF_U2DS BIT(27) +/* U0 state entry request (used in SS mode). */ +#define USB_CONF_LGO_U0 BIT(28) +/* U1 state entry request (used in SS mode). */ +#define USB_CONF_LGO_U1 BIT(29) +/* U2 state entry request (used in SS mode). */ +#define USB_CONF_LGO_U2 BIT(30) +/* SS.Inactive state entry request (used in SS mode) */ +#define USB_CONF_LGO_SSINACT BIT(31) + +/* USB_STS - bitmasks */ +/* + * Configuration status. + * 1 - device is in the configured state. + * 0 - device is not configured. + */ +#define USB_STS_CFGSTS_MASK BIT(0) +#define USB_STS_CFGSTS(p) ((p) & USB_STS_CFGSTS_MASK) +/* + * On-chip memory overflow. + * 0 - On-chip memory status OK. + * 1 - On-chip memory overflow. + */ +#define USB_STS_OV_MASK BIT(1) +#define USB_STS_OV(p) ((p) & USB_STS_OV_MASK) +/* + * SuperSpeed connection status. + * 0 - USB in SuperSpeed mode disconnected. + * 1 - USB in SuperSpeed mode connected. + */ +#define USB_STS_USB3CONS_MASK BIT(2) +#define USB_STS_USB3CONS(p) ((p) & USB_STS_USB3CONS_MASK) +/* + * DMA transfer configuration status. + * 0 - single request. + * 1 - multiple TRB chain + * Supported only for controller version < DEV_VER_V3 + */ +#define USB_STS_DTRANS_MASK BIT(3) +#define USB_STS_DTRANS(p) ((p) & USB_STS_DTRANS_MASK) +/* + * Device speed. + * 0 - Undefined (value after reset). + * 1 - Low speed + * 2 - Full speed + * 3 - High speed + * 4 - Super speed + */ +#define USB_STS_USBSPEED_MASK GENMASK(6, 4) +#define USB_STS_USBSPEED(p) (((p) & USB_STS_USBSPEED_MASK) >> 4) +#define USB_STS_LS (0x1 << 4) +#define USB_STS_FS (0x2 << 4) +#define USB_STS_HS (0x3 << 4) +#define USB_STS_SS (0x4 << 4) +#define DEV_UNDEFSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == (0x0 << 4)) +#define DEV_LOWSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_LS) +#define DEV_FULLSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_FS) +#define DEV_HIGHSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_HS) +#define DEV_SUPERSPEED(p) (((p) & USB_STS_USBSPEED_MASK) == USB_STS_SS) +/* + * Endianness for SFR access. + * 0 - Little Endian order (default after hardware reset). + * 1 - Big Endian order + */ +#define USB_STS_ENDIAN_MASK BIT(7) +#define USB_STS_ENDIAN(p) ((p) & USB_STS_ENDIAN_MASK) +/* + * HS/FS clock turn-off status. + * 0 - hsfs clock is always on. + * 1 - hsfs clock turn-off in L2 (HS/FS mode) is enabled + * (default after hardware reset). + */ +#define USB_STS_CLK2OFF_MASK BIT(8) +#define USB_STS_CLK2OFF(p) ((p) & USB_STS_CLK2OFF_MASK) +/* + * PCLK clock turn-off status. + * 0 - pclk clock is always on. + * 1 - pclk clock turn-off in U3 (SS mode) is enabled + * (default after hardware reset). + */ +#define USB_STS_CLK3OFF_MASK BIT(9) +#define USB_STS_CLK3OFF(p) ((p) & USB_STS_CLK3OFF_MASK) +/* + * Controller in reset state. + * 0 - Internal reset is active. + * 1 - Internal reset is not active and controller is fully operational. + */ +#define USB_STS_IN_RST_MASK BIT(10) +#define USB_STS_IN_RST(p) ((p) & USB_STS_IN_RST_MASK) +/* + * Status of the "TDL calculation basing on TRB" feature. + * 0 - disabled + * 1 - enabled + * Supported only for DEV_VER_V2 controller version. + */ +#define USB_STS_TDL_TRB_ENABLED BIT(11) +/* + * Device enable Status. + * 0 - USB device is disabled (VBUS input is disconnected from internal logic). + * 1 - USB device is enabled (VBUS input is connected to the internal logic). + */ +#define USB_STS_DEVS_MASK BIT(14) +#define USB_STS_DEVS(p) ((p) & USB_STS_DEVS_MASK) +/* + * Address status. + * 0 - USB device is default state. + * 1 - USB device is at least in address state. + */ +#define USB_STS_ADDRESSED_MASK BIT(15) +#define USB_STS_ADDRESSED(p) ((p) & USB_STS_ADDRESSED_MASK) +/* + * L1 LPM state enable status (used in HS/FS mode). + * 0 - Entering to L1 LPM state disabled. + * 1 - Entering to L1 LPM state enabled. + */ +#define USB_STS_L1ENS_MASK BIT(16) +#define USB_STS_L1ENS(p) ((p) & USB_STS_L1ENS_MASK) +/* + * Internal VBUS connection status (used both in HS/FS and SS mode). + * 0 - internal VBUS is not detected. + * 1 - internal VBUS is detected. + */ +#define USB_STS_VBUSS_MASK BIT(17) +#define USB_STS_VBUSS(p) ((p) & USB_STS_VBUSS_MASK) +/* + * HS/FS LPM state (used in FS/HS mode). + * 0 - L0 State + * 1 - L1 State + * 2 - L2 State + * 3 - L3 State + */ +#define USB_STS_LPMST_MASK GENMASK(19, 18) +#define DEV_L0_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x0 << 18)) +#define DEV_L1_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x1 << 18)) +#define DEV_L2_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x2 << 18)) +#define DEV_L3_STATE(p) (((p) & USB_STS_LPMST_MASK) == (0x3 << 18)) +/* + * Disable HS status (used in FS/HS mode). + * 0 - the disconnect bit for HS/FS mode is set . + * 1 - the disconnect bit for HS/FS mode is not set. + */ +#define USB_STS_USB2CONS_MASK BIT(20) +#define USB_STS_USB2CONS(p) ((p) & USB_STS_USB2CONS_MASK) +/* + * HS/FS mode connection status (used in FS/HS mode). + * 0 - High Speed operations in USB2.0 (FS/HS) mode not disabled. + * 1 - High Speed operations in USB2.0 (FS/HS). + */ +#define USB_STS_DISABLE_HS_MASK BIT(21) +#define USB_STS_DISABLE_HS(p) ((p) & USB_STS_DISABLE_HS_MASK) +/* + * U1 state enable status (used in SS mode). + * 0 - Entering to U1 state disabled. + * 1 - Entering to U1 state enabled. + */ +#define USB_STS_U1ENS_MASK BIT(24) +#define USB_STS_U1ENS(p) ((p) & USB_STS_U1ENS_MASK) +/* + * U2 state enable status (used in SS mode). + * 0 - Entering to U2 state disabled. + * 1 - Entering to U2 state enabled. + */ +#define USB_STS_U2ENS_MASK BIT(25) +#define USB_STS_U2ENS(p) ((p) & USB_STS_U2ENS_MASK) +/* + * SuperSpeed Link LTSSM state. This field reflects USBSS-DEV current + * SuperSpeed link state + */ +#define USB_STS_LST_MASK GENMASK(29, 26) +#define DEV_LST_U0 (((p) & USB_STS_LST_MASK) == (0x0 << 26)) +#define DEV_LST_U1 (((p) & USB_STS_LST_MASK) == (0x1 << 26)) +#define DEV_LST_U2 (((p) & USB_STS_LST_MASK) == (0x2 << 26)) +#define DEV_LST_U3 (((p) & USB_STS_LST_MASK) == (0x3 << 26)) +#define DEV_LST_DISABLED (((p) & USB_STS_LST_MASK) == (0x4 << 26)) +#define DEV_LST_RXDETECT (((p) & USB_STS_LST_MASK) == (0x5 << 26)) +#define DEV_LST_INACTIVE (((p) & USB_STS_LST_MASK) == (0x6 << 26)) +#define DEV_LST_POLLING (((p) & USB_STS_LST_MASK) == (0x7 << 26)) +#define DEV_LST_RECOVERY (((p) & USB_STS_LST_MASK) == (0x8 << 26)) +#define DEV_LST_HOT_RESET (((p) & USB_STS_LST_MASK) == (0x9 << 26)) +#define DEV_LST_COMP_MODE (((p) & USB_STS_LST_MASK) == (0xa << 26)) +#define DEV_LST_LB_STATE (((p) & USB_STS_LST_MASK) == (0xb << 26)) +/* + * DMA clock turn-off status. + * 0 - DMA clock is always on (default after hardware reset). + * 1 - DMA clock turn-off in U1, U2 and U3 (SS mode) is enabled. + */ +#define USB_STS_DMAOFF_MASK BIT(30) +#define USB_STS_DMAOFF(p) ((p) & USB_STS_DMAOFF_MASK) +/* + * SFR Endian status. + * 0 - Little Endian order (default after hardware reset). + * 1 - Big Endian order. + */ +#define USB_STS_ENDIAN2_MASK BIT(31) +#define USB_STS_ENDIAN2(p) ((p) & USB_STS_ENDIAN2_MASK) + +/* USB_CMD - bitmasks */ +/* Set Function Address */ +#define USB_CMD_SET_ADDR BIT(0) +/* + * Function Address This field is saved to the device only when the field + * SET_ADDR is set '1 ' during write to USB_CMD register. + * Software is responsible for entering the address of the device during + * SET_ADDRESS request service. This field should be set immediately after + * the SETUP packet is decoded, and prior to confirmation of the status phase + */ +#define USB_CMD_FADDR_MASK GENMASK(7, 1) +#define USB_CMD_FADDR(p) (((p) << 1) & USB_CMD_FADDR_MASK) +/* Send Function Wake Device Notification TP (used only in SS mode). */ +#define USB_CMD_SDNFW BIT(8) +/* Set Test Mode (used only in HS/FS mode). */ +#define USB_CMD_STMODE BIT(9) +/* Test mode selector (used only in HS/FS mode) */ +#define USB_STS_TMODE_SEL_MASK GENMASK(11, 10) +#define USB_STS_TMODE_SEL(p) (((p) << 10) & USB_STS_TMODE_SEL_MASK) +/* + * Send Latency Tolerance Message Device Notification TP (used only + * in SS mode). + */ +#define USB_CMD_SDNLTM BIT(12) +/* Send Custom Transaction Packet (used only in SS mode) */ +#define USB_CMD_SPKT BIT(13) +/*Device Notification 'Function Wake' - Interface value (only in SS mode. */ +#define USB_CMD_DNFW_INT_MASK GENMASK(23, 16) +#define USB_STS_DNFW_INT(p) (((p) << 16) & USB_CMD_DNFW_INT_MASK) +/* + * Device Notification 'Latency Tolerance Message' -373 BELT value [7:0] + * (used only in SS mode). + */ +#define USB_CMD_DNLTM_BELT_MASK GENMASK(27, 16) +#define USB_STS_DNLTM_BELT(p) (((p) << 16) & USB_CMD_DNLTM_BELT_MASK) + +/* USB_ITPN - bitmasks */ +/* + * ITP(SS) / SOF (HS/FS) number + * In SS mode this field represent number of last ITP received from host. + * In HS/FS mode this field represent number of last SOF received from host. + */ +#define USB_ITPN_MASK GENMASK(13, 0) +#define USB_ITPN(p) ((p) & USB_ITPN_MASK) + +/* USB_LPM - bitmasks */ +/* Host Initiated Resume Duration. */ +#define USB_LPM_HIRD_MASK GENMASK(3, 0) +#define USB_LPM_HIRD(p) ((p) & USB_LPM_HIRD_MASK) +/* Remote Wakeup Enable (bRemoteWake). */ +#define USB_LPM_BRW BIT(4) + +/* USB_IEN - bitmasks */ +/* SS connection interrupt enable */ +#define USB_IEN_CONIEN BIT(0) +/* SS disconnection interrupt enable. */ +#define USB_IEN_DISIEN BIT(1) +/* USB SS warm reset interrupt enable. */ +#define USB_IEN_UWRESIEN BIT(2) +/* USB SS hot reset interrupt enable */ +#define USB_IEN_UHRESIEN BIT(3) +/* SS link U3 state enter interrupt enable (suspend).*/ +#define USB_IEN_U3ENTIEN BIT(4) +/* SS link U3 state exit interrupt enable (wakeup). */ +#define USB_IEN_U3EXTIEN BIT(5) +/* SS link U2 state enter interrupt enable.*/ +#define USB_IEN_U2ENTIEN BIT(6) +/* SS link U2 state exit interrupt enable.*/ +#define USB_IEN_U2EXTIEN BIT(7) +/* SS link U1 state enter interrupt enable.*/ +#define USB_IEN_U1ENTIEN BIT(8) +/* SS link U1 state exit interrupt enable.*/ +#define USB_IEN_U1EXTIEN BIT(9) +/* ITP/SOF packet detected interrupt enable.*/ +#define USB_IEN_ITPIEN BIT(10) +/* Wakeup interrupt enable.*/ +#define USB_IEN_WAKEIEN BIT(11) +/* Send Custom Packet interrupt enable.*/ +#define USB_IEN_SPKTIEN BIT(12) +/* HS/FS mode connection interrupt enable.*/ +#define USB_IEN_CON2IEN BIT(16) +/* HS/FS mode disconnection interrupt enable.*/ +#define USB_IEN_DIS2IEN BIT(17) +/* USB reset (HS/FS mode) interrupt enable.*/ +#define USB_IEN_U2RESIEN BIT(18) +/* LPM L2 state enter interrupt enable.*/ +#define USB_IEN_L2ENTIEN BIT(20) +/* LPM L2 state exit interrupt enable.*/ +#define USB_IEN_L2EXTIEN BIT(21) +/* LPM L1 state enter interrupt enable.*/ +#define USB_IEN_L1ENTIEN BIT(24) +/* LPM L1 state exit interrupt enable.*/ +#define USB_IEN_L1EXTIEN BIT(25) +/* Configuration reset interrupt enable.*/ +#define USB_IEN_CFGRESIEN BIT(26) +/* Start of the USB SS warm reset interrupt enable.*/ +#define USB_IEN_UWRESSIEN BIT(28) +/* End of the USB SS warm reset interrupt enable.*/ +#define USB_IEN_UWRESEIEN BIT(29) + +#define USB_IEN_INIT (USB_IEN_U2RESIEN | USB_ISTS_DIS2I | USB_IEN_CON2IEN \ + | USB_IEN_UHRESIEN | USB_IEN_UWRESIEN | USB_IEN_DISIEN \ + | USB_IEN_CONIEN | USB_IEN_U3EXTIEN | USB_IEN_L2ENTIEN \ + | USB_IEN_L2EXTIEN | USB_IEN_L1ENTIEN | USB_IEN_U3ENTIEN) + +/* USB_ISTS - bitmasks */ +/* SS Connection detected. */ +#define USB_ISTS_CONI BIT(0) +/* SS Disconnection detected. */ +#define USB_ISTS_DISI BIT(1) +/* UUSB warm reset detectede. */ +#define USB_ISTS_UWRESI BIT(2) +/* USB hot reset detected. */ +#define USB_ISTS_UHRESI BIT(3) +/* U3 link state enter detected (suspend).*/ +#define USB_ISTS_U3ENTI BIT(4) +/* U3 link state exit detected (wakeup). */ +#define USB_ISTS_U3EXTI BIT(5) +/* U2 link state enter detected.*/ +#define USB_ISTS_U2ENTI BIT(6) +/* U2 link state exit detected.*/ +#define USB_ISTS_U2EXTI BIT(7) +/* U1 link state enter detected.*/ +#define USB_ISTS_U1ENTI BIT(8) +/* U1 link state exit detected.*/ +#define USB_ISTS_U1EXTI BIT(9) +/* ITP/SOF packet detected.*/ +#define USB_ISTS_ITPI BIT(10) +/* Wakeup detected.*/ +#define USB_ISTS_WAKEI BIT(11) +/* Send Custom Packet detected.*/ +#define USB_ISTS_SPKTI BIT(12) +/* HS/FS mode connection detected.*/ +#define USB_ISTS_CON2I BIT(16) +/* HS/FS mode disconnection detected.*/ +#define USB_ISTS_DIS2I BIT(17) +/* USB reset (HS/FS mode) detected.*/ +#define USB_ISTS_U2RESI BIT(18) +/* LPM L2 state enter detected.*/ +#define USB_ISTS_L2ENTI BIT(20) +/* LPM L2 state exit detected.*/ +#define USB_ISTS_L2EXTI BIT(21) +/* LPM L1 state enter detected.*/ +#define USB_ISTS_L1ENTI BIT(24) +/* LPM L1 state exit detected.*/ +#define USB_ISTS_L1EXTI BIT(25) +/* USB configuration reset detected.*/ +#define USB_ISTS_CFGRESI BIT(26) +/* Start of the USB warm reset detected.*/ +#define USB_ISTS_UWRESSI BIT(28) +/* End of the USB warm reset detected.*/ +#define USB_ISTS_UWRESEI BIT(29) + +/* USB_SEL - bitmasks */ +#define EP_SEL_EPNO_MASK GENMASK(3, 0) +/* Endpoint number. */ +#define EP_SEL_EPNO(p) ((p) & EP_SEL_EPNO_MASK) +/* Endpoint direction bit - 0 - OUT, 1 - IN. */ +#define EP_SEL_DIR BIT(7) + +#define select_ep_in(nr) (EP_SEL_EPNO(p) | EP_SEL_DIR) +#define select_ep_out (EP_SEL_EPNO(p)) + +/* EP_TRADDR - bitmasks */ +/* Transfer Ring address. */ +#define EP_TRADDR_TRADDR(p) ((p)) + +/* EP_CFG - bitmasks */ +/* Endpoint enable */ +#define EP_CFG_ENABLE BIT(0) +/* + * Endpoint type. + * 1 - isochronous + * 2 - bulk + * 3 - interrupt + */ +#define EP_CFG_EPTYPE_MASK GENMASK(2, 1) +#define EP_CFG_EPTYPE(p) (((p) << 1) & EP_CFG_EPTYPE_MASK) +/* Stream support enable (only in SS mode). */ +#define EP_CFG_STREAM_EN BIT(3) +/* TDL check (only in SS mode for BULK EP). */ +#define EP_CFG_TDL_CHK BIT(4) +/* SID check (only in SS mode for BULK OUT EP). */ +#define EP_CFG_SID_CHK BIT(5) +/* DMA transfer endianness. */ +#define EP_CFG_EPENDIAN BIT(7) +/* Max burst size (used only in SS mode). */ +#define EP_CFG_MAXBURST_MASK GENMASK(11, 8) +#define EP_CFG_MAXBURST(p) (((p) << 8) & EP_CFG_MAXBURST_MASK) +/* ISO max burst. */ +#define EP_CFG_MULT_MASK GENMASK(15, 14) +#define EP_CFG_MULT(p) (((p) << 14) & EP_CFG_MULT_MASK) +/* ISO max burst. */ +#define EP_CFG_MAXPKTSIZE_MASK GENMASK(26, 16) +#define EP_CFG_MAXPKTSIZE(p) (((p) << 16) & EP_CFG_MAXPKTSIZE_MASK) +/* Max number of buffered packets. */ +#define EP_CFG_BUFFERING_MASK GENMASK(31, 27) +#define EP_CFG_BUFFERING(p) (((p) << 27) & EP_CFG_BUFFERING_MASK) + +/* EP_CMD - bitmasks */ +/* Endpoint reset. */ +#define EP_CMD_EPRST BIT(0) +/* Endpoint STALL set. */ +#define EP_CMD_SSTALL BIT(1) +/* Endpoint STALL clear. */ +#define EP_CMD_CSTALL BIT(2) +/* Send ERDY TP. */ +#define EP_CMD_ERDY BIT(3) +/* Request complete. */ +#define EP_CMD_REQ_CMPL BIT(5) +/* Transfer descriptor ready. */ +#define EP_CMD_DRDY BIT(6) +/* Data flush. */ +#define EP_CMD_DFLUSH BIT(7) +/* + * Transfer Descriptor Length write (used only for Bulk Stream capable + * endpoints in SS mode). + * Bit Removed from DEV_VER_V3 controller version. + */ +#define EP_CMD_STDL BIT(8) +/* + * Transfer Descriptor Length (used only in SS mode for bulk endpoints). + * Bits Removed from DEV_VER_V3 controller version. + */ +#define EP_CMD_TDL_MASK GENMASK(15, 9) +#define EP_CMD_TDL_SET(p) (((p) << 9) & EP_CMD_TDL_MASK) +#define EP_CMD_TDL_GET(p) (((p) & EP_CMD_TDL_MASK) >> 9) + +/* ERDY Stream ID value (used in SS mode). */ +#define EP_CMD_ERDY_SID_MASK GENMASK(31, 16) +#define EP_CMD_ERDY_SID(p) (((p) << 16) & EP_CMD_ERDY_SID_MASK) + +/* EP_STS - bitmasks */ +/* Setup transfer complete. */ +#define EP_STS_SETUP BIT(0) +/* Endpoint STALL status. */ +#define EP_STS_STALL(p) ((p) & BIT(1)) +/* Interrupt On Complete. */ +#define EP_STS_IOC BIT(2) +/* Interrupt on Short Packet. */ +#define EP_STS_ISP BIT(3) +/* Transfer descriptor missing. */ +#define EP_STS_DESCMIS BIT(4) +/* Stream Rejected (used only in SS mode) */ +#define EP_STS_STREAMR BIT(5) +/* EXIT from MOVE DATA State (used only for stream transfers in SS mode). */ +#define EP_STS_MD_EXIT BIT(6) +/* TRB error. */ +#define EP_STS_TRBERR BIT(7) +/* Not ready (used only in SS mode). */ +#define EP_STS_NRDY BIT(8) +/* DMA busy bit. */ +#define EP_STS_DBUSY BIT(9) +/* Endpoint Buffer Empty */ +#define EP_STS_BUFFEMPTY(p) ((p) & BIT(10)) +/* Current Cycle Status */ +#define EP_STS_CCS(p) ((p) & BIT(11)) +/* Prime (used only in SS mode. */ +#define EP_STS_PRIME BIT(12) +/* Stream error (used only in SS mode). */ +#define EP_STS_SIDERR BIT(13) +/* OUT size mismatch. */ +#define EP_STS_OUTSMM BIT(14) +/* ISO transmission error. */ +#define EP_STS_ISOERR BIT(15) +/* Host Packet Pending (only for SS mode). */ +#define EP_STS_HOSTPP(p) ((p) & BIT(16)) +/* Stream Protocol State Machine State (only for Bulk stream endpoints). */ +#define EP_STS_SPSMST_MASK GENMASK(18, 17) +#define EP_STS_SPSMST_DISABLED(p) (((p) & EP_STS_SPSMST_MASK) >> 17) +#define EP_STS_SPSMST_IDLE(p) (((p) & EP_STS_SPSMST_MASK) >> 17) +#define EP_STS_SPSMST_START_STREAM(p) (((p) & EP_STS_SPSMST_MASK) >> 17) +#define EP_STS_SPSMST_MOVE_DATA(p) (((p) & EP_STS_SPSMST_MASK) >> 17) +/* Interrupt On Transfer complete. */ +#define EP_STS_IOT BIT(19) +/* OUT queue endpoint number. */ +#define EP_STS_OUTQ_NO_MASK GENMASK(27, 24) +#define EP_STS_OUTQ_NO(p) (((p) & EP_STS_OUTQ_NO_MASK) >> 24) +/* OUT queue valid flag. */ +#define EP_STS_OUTQ_VAL_MASK BIT(28) +#define EP_STS_OUTQ_VAL(p) ((p) & EP_STS_OUTQ_VAL_MASK) +/* SETUP WAIT. */ +#define EP_STS_STPWAIT BIT(31) + +/* EP_STS_SID - bitmasks */ +/* Stream ID (used only in SS mode). */ +#define EP_STS_SID_MASK GENMASK(15, 0) +#define EP_STS_SID(p) ((p) & EP_STS_SID_MASK) + +/* EP_STS_EN - bitmasks */ +/* SETUP interrupt enable. */ +#define EP_STS_EN_SETUPEN BIT(0) +/* OUT transfer missing descriptor enable. */ +#define EP_STS_EN_DESCMISEN BIT(4) +/* Stream Rejected enable. */ +#define EP_STS_EN_STREAMREN BIT(5) +/* Move Data Exit enable.*/ +#define EP_STS_EN_MD_EXITEN BIT(6) +/* TRB enable. */ +#define EP_STS_EN_TRBERREN BIT(7) +/* NRDY enable. */ +#define EP_STS_EN_NRDYEN BIT(8) +/* Prime enable. */ +#define EP_STS_EN_PRIMEEEN BIT(12) +/* Stream error enable. */ +#define EP_STS_EN_SIDERREN BIT(13) +/* OUT size mismatch enable. */ +#define EP_STS_EN_OUTSMMEN BIT(14) +/* ISO transmission error enable. */ +#define EP_STS_EN_ISOERREN BIT(15) +/* Interrupt on Transmission complete enable. */ +#define EP_STS_EN_IOTEN BIT(19) +/* Setup Wait interrupt enable. */ +#define EP_STS_EN_STPWAITEN BIT(31) + +/* DRBL- bitmasks */ +#define DB_VALUE_BY_INDEX(index) (1 << (index)) +#define DB_VALUE_EP0_OUT BIT(0) +#define DB_VALUE_EP0_IN BIT(16) + +/* EP_IEN - bitmasks */ +#define EP_IEN(index) (1 << (index)) +#define EP_IEN_EP_OUT0 BIT(0) +#define EP_IEN_EP_IN0 BIT(16) + +/* EP_ISTS - bitmasks */ +#define EP_ISTS(index) (1 << (index)) +#define EP_ISTS_EP_OUT0 BIT(0) +#define EP_ISTS_EP_IN0 BIT(16) + +/* USB_PWR- bitmasks */ +/*Power Shut Off capability enable*/ +#define PUSB_PWR_PSO_EN BIT(0) +/*Power Shut Off capability disable*/ +#define PUSB_PWR_PSO_DS BIT(1) +/* + * Enables turning-off Reference Clock. + * This bit is optional and implemented only when support for OTG is + * implemented (indicated by OTG_READY bit set to '1'). + */ +#define PUSB_PWR_STB_CLK_SWITCH_EN BIT(8) +/* + * Status bit indicating that operation required by STB_CLK_SWITCH_EN write + * is completed + */ +#define PUSB_PWR_STB_CLK_SWITCH_DONE BIT(9) +/* This bit informs if Fast Registers Access is enabled. */ +#define PUSB_PWR_FST_REG_ACCESS_STAT BIT(30) +/* Fast Registers Access Enable. */ +#define PUSB_PWR_FST_REG_ACCESS BIT(31) + +/* USB_CONF2- bitmasks */ +/* + * Writing 1 disables TDL calculation basing on TRB feature in controller + * for DMULT mode. + * Bit supported only for DEV_VER_V2 version. + */ +#define USB_CONF2_DIS_TDL_TRB BIT(1) +/* + * Writing 1 enables TDL calculation basing on TRB feature in controller + * for DMULT mode. + * Bit supported only for DEV_VER_V2 version. + */ +#define USB_CONF2_EN_TDL_TRB BIT(2) + +/* USB_CAP1- bitmasks */ +/* + * SFR Interface type + * These field reflects type of SFR interface implemented: + * 0x0 - OCP + * 0x1 - AHB, + * 0x2 - PLB + * 0x3 - AXI + * 0x4-0xF - reserved + */ +#define USB_CAP1_SFR_TYPE_MASK GENMASK(3, 0) +#define DEV_SFR_TYPE_OCP(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x0) +#define DEV_SFR_TYPE_AHB(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x1) +#define DEV_SFR_TYPE_PLB(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x2) +#define DEV_SFR_TYPE_AXI(p) (((p) & USB_CAP1_SFR_TYPE_MASK) == 0x3) +/* + * SFR Interface width + * These field reflects width of SFR interface implemented: + * 0x0 - 8 bit interface, + * 0x1 - 16 bit interface, + * 0x2 - 32 bit interface + * 0x3 - 64 bit interface + * 0x4-0xF - reserved + */ +#define USB_CAP1_SFR_WIDTH_MASK GENMASK(7, 4) +#define DEV_SFR_WIDTH_8(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x0 << 4)) +#define DEV_SFR_WIDTH_16(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x1 << 4)) +#define DEV_SFR_WIDTH_32(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x2 << 4)) +#define DEV_SFR_WIDTH_64(p) (((p) & USB_CAP1_SFR_WIDTH_MASK) == (0x3 << 4)) +/* + * DMA Interface type + * These field reflects type of DMA interface implemented: + * 0x0 - OCP + * 0x1 - AHB, + * 0x2 - PLB + * 0x3 - AXI + * 0x4-0xF - reserved + */ +#define USB_CAP1_DMA_TYPE_MASK GENMASK(11, 8) +#define DEV_DMA_TYPE_OCP(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x0 << 8)) +#define DEV_DMA_TYPE_AHB(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x1 << 8)) +#define DEV_DMA_TYPE_PLB(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x2 << 8)) +#define DEV_DMA_TYPE_AXI(p) (((p) & USB_CAP1_DMA_TYPE_MASK) == (0x3 << 8)) +/* + * DMA Interface width + * These field reflects width of DMA interface implemented: + * 0x0 - reserved, + * 0x1 - reserved, + * 0x2 - 32 bit interface + * 0x3 - 64 bit interface + * 0x4-0xF - reserved + */ +#define USB_CAP1_DMA_WIDTH_MASK GENMASK(15, 12) +#define DEV_DMA_WIDTH_32(p) (((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x2 << 12)) +#define DEV_DMA_WIDTH_64(p) (((p) & USB_CAP1_DMA_WIDTH_MASK) == (0x3 << 12)) +/* + * USB3 PHY Interface type + * These field reflects type of USB3 PHY interface implemented: + * 0x0 - USB PIPE, + * 0x1 - RMMI, + * 0x2-0xF - reserved + */ +#define USB_CAP1_U3PHY_TYPE_MASK GENMASK(19, 16) +#define DEV_U3PHY_PIPE(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x0 << 16)) +#define DEV_U3PHY_RMMI(p) (((p) & USB_CAP1_U3PHY_TYPE_MASK) == (0x1 << 16)) +/* + * USB3 PHY Interface width + * These field reflects width of USB3 PHY interface implemented: + * 0x0 - 8 bit PIPE interface, + * 0x1 - 16 bit PIPE interface, + * 0x2 - 32 bit PIPE interface, + * 0x3 - 64 bit PIPE interface + * 0x4-0xF - reserved + * Note: When SSIC interface is implemented this field shows the width of + * internal PIPE interface. The RMMI interface is always 20bit wide. + */ +#define USB_CAP1_U3PHY_WIDTH_MASK GENMASK(23, 20) +#define DEV_U3PHY_WIDTH_8(p) \ + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x0 << 20)) +#define DEV_U3PHY_WIDTH_16(p) \ + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x1 << 16)) +#define DEV_U3PHY_WIDTH_32(p) \ + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x2 << 20)) +#define DEV_U3PHY_WIDTH_64(p) \ + (((p) & USB_CAP1_U3PHY_WIDTH_MASK) == (0x3 << 16)) + +/* + * USB2 PHY Interface enable + * These field informs if USB2 PHY interface is implemented: + * 0x0 - interface NOT implemented, + * 0x1 - interface implemented + */ +#define USB_CAP1_U2PHY_EN(p) ((p) & BIT(24)) +/* + * USB2 PHY Interface type + * These field reflects type of USB2 PHY interface implemented: + * 0x0 - UTMI, + * 0x1 - ULPI + */ +#define DEV_U2PHY_ULPI(p) ((p) & BIT(25)) +/* + * USB2 PHY Interface width + * These field reflects width of USB2 PHY interface implemented: + * 0x0 - 8 bit interface, + * 0x1 - 16 bit interface, + * Note: The ULPI interface is always 8bit wide. + */ +#define DEV_U2PHY_WIDTH_16(p) ((p) & BIT(26)) +/* + * OTG Ready + * 0x0 - pure device mode + * 0x1 - some features and ports for CDNS USB OTG controller are implemented. + */ +#define USB_CAP1_OTG_READY(p) ((p) & BIT(27)) + +/* + * When set, indicates that controller supports automatic internal TDL + * calculation basing on the size provided in TRB (TRB[22:17]) for DMULT mode + * Supported only for DEV_VER_V2 controller version. + */ +#define USB_CAP1_TDL_FROM_TRB(p) ((p) & BIT(28)) + +/* USB_CAP2- bitmasks */ +/* + * The actual size of the connected On-chip RAM memory in kB: + * - 0 means 256 kB (max supported mem size) + * - value other than 0 reflects the mem size in kB + */ +#define USB_CAP2_ACTUAL_MEM_SIZE(p) ((p) & GENMASK(7, 0)) +/* + * Max supported mem size + * These field reflects width of on-chip RAM address bus width, + * which determines max supported mem size: + * 0x0-0x7 - reserved, + * 0x8 - support for 4kB mem, + * 0x9 - support for 8kB mem, + * 0xA - support for 16kB mem, + * 0xB - support for 32kB mem, + * 0xC - support for 64kB mem, + * 0xD - support for 128kB mem, + * 0xE - support for 256kB mem, + * 0xF - reserved + */ +#define USB_CAP2_MAX_MEM_SIZE(p) ((p) & GENMASK(11, 8)) + +/* USB_CAP3- bitmasks */ +#define EP_IS_IMPLEMENTED(reg, index) ((reg) & (1 << (index))) + +/* USB_CAP4- bitmasks */ +#define EP_SUPPORT_ISO(reg, index) ((reg) & (1 << (index))) + +/* USB_CAP5- bitmasks */ +#define EP_SUPPORT_STREAM(reg, index) ((reg) & (1 << (index))) + +/* USB_CAP6- bitmasks */ +/* The USBSS-DEV Controller Internal build number. */ +#define GET_DEV_BASE_VERSION(p) ((p) & GENMASK(23, 0)) +/* The USBSS-DEV Controller version number. */ +#define GET_DEV_CUSTOM_VERSION(p) ((p) & GENMASK(31, 24)) + +#define DEV_VER_NXP_V1 0x00024502 +#define DEV_VER_TI_V1 0x00024509 +#define DEV_VER_V2 0x0002450C +#define DEV_VER_V3 0x0002450d + +/* DBG_LINK1- bitmasks */ +/* + * LFPS_MIN_DET_U1_EXIT value This parameter configures the minimum + * time required for decoding the received LFPS as an LFPS.U1_Exit. + */ +#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT(p) ((p) & GENMASK(7, 0)) +/* + * LFPS_MIN_GEN_U1_EXIT value This parameter configures the minimum time for + * phytxelecidle deassertion when LFPS.U1_Exit + */ +#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK GENMASK(15, 8) +#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(p) (((p) << 8) & GENMASK(15, 8)) +/* + * RXDET_BREAK_DIS value This parameter configures terminating the Far-end + * Receiver termination detection sequence: + * 0: it is possible that USBSS_DEV will terminate Farend receiver + * termination detection sequence + * 1: USBSS_DEV will not terminate Far-end receiver termination + * detection sequence + */ +#define DBG_LINK1_RXDET_BREAK_DIS BIT(16) +/* LFPS_GEN_PING value This parameter configures the LFPS.Ping generation */ +#define DBG_LINK1_LFPS_GEN_PING(p) (((p) << 17) & GENMASK(21, 17)) +/* + * Set the LFPS_MIN_DET_U1_EXIT value Writing '1' to this bit writes the + * LFPS_MIN_DET_U1_EXIT field value to the device. This bit is automatically + * cleared. Writing '0' has no effect + */ +#define DBG_LINK1_LFPS_MIN_DET_U1_EXIT_SET BIT(24) +/* + * Set the LFPS_MIN_GEN_U1_EXIT value. Writing '1' to this bit writes the + * LFPS_MIN_GEN_U1_EXIT field value to the device. This bit is automatically + * cleared. Writing '0' has no effect + */ +#define DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET BIT(25) +/* + * Set the RXDET_BREAK_DIS value Writing '1' to this bit writes + * the RXDET_BREAK_DIS field value to the device. This bit is automatically + * cleared. Writing '0' has no effect + */ +#define DBG_LINK1_RXDET_BREAK_DIS_SET BIT(26) +/* + * Set the LFPS_GEN_PING_SET value Writing '1' to this bit writes + * the LFPS_GEN_PING field value to the device. This bit is automatically + * cleared. Writing '0' has no effect." + */ +#define DBG_LINK1_LFPS_GEN_PING_SET BIT(27) + +/* DMA_AXI_CTRL- bitmasks */ +/* The mawprot pin configuration. */ +#define DMA_AXI_CTRL_MARPROT(p) ((p) & GENMASK(2, 0)) +/* The marprot pin configuration. */ +#define DMA_AXI_CTRL_MAWPROT(p) (((p) & GENMASK(2, 0)) << 16) +#define DMA_AXI_CTRL_NON_SECURE 0x02 + +#define gadget_to_cdns3_device(g) (container_of(g, struct cdns3_device, gadget)) + +#define ep_to_cdns3_ep(ep) (container_of(ep, struct cdns3_endpoint, endpoint)) + +/*-------------------------------------------------------------------------*/ +/* + * USBSS-DEV DMA interface. + */ +#define TRBS_PER_SEGMENT 40 + +#define ISO_MAX_INTERVAL 10 + +#if TRBS_PER_SEGMENT < 2 +#error "Incorrect TRBS_PER_SEGMENT. Minimal Transfer Ring size is 2." +#endif + +/* + *Only for ISOC endpoints - maximum number of TRBs is calculated as + * pow(2, bInterval-1) * number of usb requests. It is limitation made by + * driver to save memory. Controller must prepare TRB for each ITP even + * if bInterval > 1. It's the reason why driver needs so many TRBs for + * isochronous endpoints. + */ +#define TRBS_PER_ISOC_SEGMENT (ISO_MAX_INTERVAL * 8) + +#define GET_TRBS_PER_SEGMENT(ep_type) ((ep_type) == USB_ENDPOINT_XFER_ISOC ? \ + TRBS_PER_ISOC_SEGMENT : TRBS_PER_SEGMENT) +/** + * struct cdns3_trb - represent Transfer Descriptor block. + * @buffer: pointer to buffer data + * @length: length of data + * @control: control flags. + * + * This structure describes transfer block serviced by DMA module. + */ +struct cdns3_trb { + __le32 buffer; + __le32 length; + __le32 control; +}; + +#define TRB_SIZE (sizeof(struct cdns3_trb)) +#define TRB_RING_SIZE (TRB_SIZE * TRBS_PER_SEGMENT) +#define TRB_ISO_RING_SIZE (TRB_SIZE * TRBS_PER_ISOC_SEGMENT) +#define TRB_CTRL_RING_SIZE (TRB_SIZE * 2) + +/* TRB bit mask */ +#define TRB_TYPE_BITMASK GENMASK(15, 10) +#define TRB_TYPE(p) ((p) << 10) +#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10) + +/* TRB type IDs */ +/* bulk, interrupt, isoc , and control data stage */ +#define TRB_NORMAL 1 +/* TRB for linking ring segments */ +#define TRB_LINK 6 + +/* Cycle bit - indicates TRB ownership by driver or hw*/ +#define TRB_CYCLE BIT(0) +/* + * When set to '1', the device will toggle its interpretation of the Cycle bit + */ +#define TRB_TOGGLE BIT(1) + +/* + * Short Packet (SP). OUT EPs at DMULT=1 only. Indicates if the TRB was + * processed while USB short packet was received. No more buffers defined by + * the TD will be used. DMA will automatically advance to next TD. + * - Shall be set to 0 by Software when putting TRB on the Transfer Ring + * - Shall be set to 1 by Controller when Short Packet condition for this TRB + * is detected independent if ISP is set or not. + */ +#define TRB_SP BIT(1) + +/* Interrupt on short packet*/ +#define TRB_ISP BIT(2) +/*Setting this bit enables FIFO DMA operation mode*/ +#define TRB_FIFO_MODE BIT(3) +/* Set PCIe no snoop attribute */ +#define TRB_CHAIN BIT(4) +/* Interrupt on completion */ +#define TRB_IOC BIT(5) + +/* stream ID bitmasks. */ +#define TRB_STREAM_ID_BITMASK GENMASK(31, 16) +#define TRB_STREAM_ID(p) ((p) << 16) +#define TRB_FIELD_TO_STREAMID(p) (((p) & TRB_STREAM_ID_BITMASK) >> 16) + +/* Size of TD expressed in USB packets for HS/FS mode. */ +#define TRB_TDL_HS_SIZE(p) (((p) << 16) & GENMASK(31, 16)) +#define TRB_TDL_HS_SIZE_GET(p) (((p) & GENMASK(31, 16)) >> 16) + +/* transfer_len bitmasks. */ +#define TRB_LEN(p) ((p) & GENMASK(16, 0)) + +/* Size of TD expressed in USB packets for SS mode. */ +#define TRB_TDL_SS_SIZE(p) (((p) << 17) & GENMASK(23, 17)) +#define TRB_TDL_SS_SIZE_GET(p) (((p) & GENMASK(23, 17)) >> 17) + +/* transfer_len bitmasks - bits 31:24 */ +#define TRB_BURST_LEN(p) (((p) << 24) & GENMASK(31, 24)) +#define TRB_BURST_LEN_GET(p) (((p) & GENMASK(31, 24)) >> 24) + +/* Data buffer pointer bitmasks*/ +#define TRB_BUFFER(p) ((p) & GENMASK(31, 0)) + +/*-------------------------------------------------------------------------*/ +/* Driver numeric constants */ + +/* Such declaration should be added to ch9.h */ +#define USB_DEVICE_MAX_ADDRESS 127 + +/* Endpoint init values */ +#define CDNS3_EP_MAX_PACKET_LIMIT 1024 +#define CDNS3_EP_MAX_STREAMS 15 +#define CDNS3_EP0_MAX_PACKET_LIMIT 512 + +/* All endpoints including EP0 */ +#define CDNS3_ENDPOINTS_MAX_COUNT 32 +#define CDNS3_EP_ZLP_BUF_SIZE 1024 + +#define CDNS3_EP_BUF_SIZE 2 /* KB */ +#define CDNS3_EP_ISO_HS_MULT 3 +#define CDNS3_EP_ISO_SS_BURST 3 +#define CDNS3_MAX_NUM_DESCMISS_BUF 32 +#define CDNS3_DESCMIS_BUF_SIZE 2048 /* Bytes */ +#define CDNS3_WA2_NUM_BUFFERS 128 +/*-------------------------------------------------------------------------*/ +/* Used structs */ + +struct cdns3_device; + +/** + * struct cdns3_endpoint - extended device side representation of USB endpoint. + * @endpoint: usb endpoint + * @pending_req_list: list of requests queuing on transfer ring. + * @deferred_req_list: list of requests waiting for queuing on transfer ring. + * @wa2_descmiss_req_list: list of requests internally allocated by driver. + * @trb_pool: transfer ring - array of transaction buffers + * @trb_pool_dma: dma address of transfer ring + * @cdns3_dev: device associated with this endpoint + * @name: a human readable name e.g. ep1out + * @flags: specify the current state of endpoint + * @descmis_req: internal transfer object used for getting data from on-chip + * buffer. It can happen only if function driver doesn't send usb_request + * object on time. + * @dir: endpoint direction + * @num: endpoint number (1 - 15) + * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK + * @interval: interval between packets used for ISOC endpoint. + * @free_trbs: number of free TRBs in transfer ring + * @num_trbs: number of all TRBs in transfer ring + * @pcs: producer cycle state + * @ccs: consumer cycle state + * @enqueue: enqueue index in transfer ring + * @dequeue: dequeue index in transfer ring + * @trb_burst_size: number of burst used in trb. + */ +struct cdns3_endpoint { + struct usb_ep endpoint; + struct list_head pending_req_list; + struct list_head deferred_req_list; + struct list_head wa2_descmiss_req_list; + int wa2_counter; + + struct cdns3_trb *trb_pool; + dma_addr_t trb_pool_dma; + + struct cdns3_device *cdns3_dev; + char name[20]; + +#define EP_ENABLED BIT(0) +#define EP_STALLED BIT(1) +#define EP_STALL_PENDING BIT(2) +#define EP_WEDGE BIT(3) +#define EP_TRANSFER_STARTED BIT(4) +#define EP_UPDATE_EP_TRBADDR BIT(5) +#define EP_PENDING_REQUEST BIT(6) +#define EP_RING_FULL BIT(7) +#define EP_CLAIMED BIT(8) +#define EP_DEFERRED_DRDY BIT(9) +#define EP_QUIRK_ISO_OUT_EN BIT(10) +#define EP_QUIRK_END_TRANSFER BIT(11) +#define EP_QUIRK_EXTRA_BUF_DET BIT(12) +#define EP_QUIRK_EXTRA_BUF_EN BIT(13) + u32 flags; + + struct cdns3_request *descmis_req; + + u8 dir; + u8 num; + u8 type; + int interval; + + int free_trbs; + int num_trbs; + u8 pcs; + u8 ccs; + int enqueue; + int dequeue; + u8 trb_burst_size; + + unsigned int wa1_set:1; + struct cdns3_trb *wa1_trb; + unsigned int wa1_trb_index; + unsigned int wa1_cycle_bit:1; +}; + +/** + * struct cdns3_aligned_buf - represent aligned buffer used for DMA transfer + * @buf: aligned to 8 bytes data buffer. Buffer address used in + * TRB shall be aligned to 8. + * @dma: dma address + * @size: size of buffer + * @in_use: inform if this buffer is associated with usb_request + * @list: used to adding instance of this object to list + */ +struct cdns3_aligned_buf { + void *buf; + dma_addr_t dma; + u32 size; + int in_use:1; + struct list_head list; +}; + +/** + * struct cdns3_request - extended device side representation of usb_request + * object . + * @request: generic usb_request object describing single I/O request. + * @priv_ep: extended representation of usb_ep object + * @trb: the first TRB association with this request + * @start_trb: number of the first TRB in transfer ring + * @end_trb: number of the last TRB in transfer ring + * @aligned_buf: object holds information about aligned buffer associated whit + * this endpoint + * @flags: flag specifying special usage of request + * @list: used by internally allocated request to add to wa2_descmiss_req_list. + */ +struct cdns3_request { + struct usb_request request; + struct cdns3_endpoint *priv_ep; + struct cdns3_trb *trb; + int start_trb; + int end_trb; + struct cdns3_aligned_buf *aligned_buf; +#define REQUEST_PENDING BIT(0) +#define REQUEST_INTERNAL BIT(1) +#define REQUEST_INTERNAL_CH BIT(2) +#define REQUEST_ZLP BIT(3) +#define REQUEST_UNALIGNED BIT(4) + u32 flags; + struct list_head list; +}; + +#define to_cdns3_request(r) (container_of(r, struct cdns3_request, request)) + +/*Stages used during enumeration process.*/ +#define CDNS3_SETUP_STAGE 0x0 +#define CDNS3_DATA_STAGE 0x1 +#define CDNS3_STATUS_STAGE 0x2 + +/** + * struct cdns3_device - represent USB device. + * @dev: pointer to device structure associated whit this controller + * @sysdev: pointer to the DMA capable device + * @gadget: device side representation of the peripheral controller + * @gadget_driver: pointer to the gadget driver + * @dev_ver: device controller version. + * @lock: for synchronizing + * @regs: base address for device side registers + * @setup_buf: used while processing usb control requests + * @setup_dma: dma address for setup_buf + * @zlp_buf - zlp buffer + * @ep0_stage: ep0 stage during enumeration process. + * @ep0_data_dir: direction for control transfer + * @eps: array of pointers to all endpoints with exclusion ep0 + * @aligned_buf_list: list of aligned buffers internally allocated by driver + * @aligned_buf_wq: workqueue freeing no longer used aligned buf. + * @selected_ep: actually selected endpoint. It's used only to improve + * performance. + * @isoch_delay: value from Set Isoch Delay request. Only valid on SS/SSP. + * @u1_allowed: allow device transition to u1 state + * @u2_allowed: allow device transition to u2 state + * @is_selfpowered: device is self powered + * @setup_pending: setup packet is processing by gadget driver + * @hw_configured_flag: hardware endpoint configuration was set. + * @wake_up_flag: allow device to remote up the host + * @status_completion_no_call: indicate that driver is waiting for status s + * stage completion. It's used in deferred SET_CONFIGURATION request. + * @onchip_buffers: number of available on-chip buffers. + * @onchip_used_size: actual size of on-chip memory assigned to endpoints. + * @pending_status_wq: workqueue handling status stage for deferred requests. + * @pending_status_request: request for which status stage was deferred + */ +struct cdns3_device { + struct device *dev; + struct device *sysdev; + + struct usb_gadget gadget; + struct usb_gadget_driver *gadget_driver; + +#define CDNS_REVISION_V0 0x00024501 +#define CDNS_REVISION_V1 0x00024509 + u32 dev_ver; + + /* generic spin-lock for drivers */ + spinlock_t lock; + + struct cdns3_usb_regs __iomem *regs; + + struct usb_ctrlrequest *setup_buf; + dma_addr_t setup_dma; + void *zlp_buf; + + u8 ep0_stage; + int ep0_data_dir; + + struct cdns3_endpoint *eps[CDNS3_ENDPOINTS_MAX_COUNT]; + + struct list_head aligned_buf_list; + struct work_struct aligned_buf_wq; + + u32 selected_ep; + u16 isoch_delay; + + unsigned wait_for_setup:1; + unsigned u1_allowed:1; + unsigned u2_allowed:1; + unsigned is_selfpowered:1; + unsigned setup_pending:1; + int hw_configured_flag:1; + int wake_up_flag:1; + unsigned status_completion_no_call:1; + int out_mem_is_allocated; + + struct work_struct pending_status_wq; + struct usb_request *pending_status_request; + + /*in KB */ + u16 onchip_buffers; + u16 onchip_used_size; +}; + +void cdns3_set_register_bit(void __iomem *ptr, u32 mask); +dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep, + struct cdns3_trb *trb); +enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev); +void cdns3_pending_setup_status_handler(struct work_struct *work); +void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev); +void cdns3_set_hw_configuration(struct cdns3_device *priv_dev); +void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep); +void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable); +struct usb_request *cdns3_next_request(struct list_head *list); +int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, + struct usb_request *request); +void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm); +int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep); +u8 cdns3_ep_addr_to_index(u8 ep_addr); +int cdns3_gadget_ep_set_wedge(struct usb_ep *ep); +int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value); +void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep); +int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep); +struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep, + gfp_t gfp_flags); +void cdns3_gadget_ep_free_request(struct usb_ep *ep, + struct usb_request *request); +int cdns3_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request); +void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req, + int status); + +int cdns3_init_ep0(struct cdns3_device *priv_dev, + struct cdns3_endpoint *priv_ep); +void cdns3_ep0_config(struct cdns3_device *priv_dev); +void cdns3_ep_config(struct cdns3_endpoint *priv_ep); +void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir); +int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev); + +#endif /* __LINUX_CDNS3_GADGET */ diff --git a/drivers/usb/cdns3/host-export.h b/drivers/usb/cdns3/host-export.h new file mode 100644 index 000000000000..b498a170b7e8 --- /dev/null +++ b/drivers/usb/cdns3/host-export.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence USBSS DRD Driver - Host Export APIs + * + * Copyright (C) 2017-2018 NXP + * + * Authors: Peter Chen <peter.chen@nxp.com> + */ +#ifndef __LINUX_CDNS3_HOST_EXPORT +#define __LINUX_CDNS3_HOST_EXPORT + +#ifdef CONFIG_USB_CDNS3_HOST + +int cdns3_host_init(struct cdns3 *cdns); +void cdns3_host_exit(struct cdns3 *cdns); + +#else + +static inline int cdns3_host_init(struct cdns3 *cdns) +{ + return -ENXIO; +} + +static inline void cdns3_host_exit(struct cdns3 *cdns) { } + +#endif /* CONFIG_USB_CDNS3_HOST */ + +#endif /* __LINUX_CDNS3_HOST_EXPORT */ diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c new file mode 100644 index 000000000000..2733a8f71fcd --- /dev/null +++ b/drivers/usb/cdns3/host.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence USBSS DRD Driver - host side + * + * Copyright (C) 2018-2019 Cadence Design Systems. + * Copyright (C) 2017-2018 NXP + * + * Authors: Peter Chen <peter.chen@nxp.com> + * Pawel Laszczak <pawell@cadence.com> + */ + +#include <linux/platform_device.h> +#include "core.h" +#include "drd.h" + +static int __cdns3_host_init(struct cdns3 *cdns) +{ + struct platform_device *xhci; + int ret; + + cdns3_drd_switch_host(cdns, 1); + + xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO); + if (!xhci) { + dev_err(cdns->dev, "couldn't allocate xHCI device\n"); + return -ENOMEM; + } + + xhci->dev.parent = cdns->dev; + cdns->host_dev = xhci; + + ret = platform_device_add_resources(xhci, cdns->xhci_res, + CDNS3_XHCI_RESOURCES_NUM); + if (ret) { + dev_err(cdns->dev, "couldn't add resources to xHCI device\n"); + goto err1; + } + + ret = platform_device_add(xhci); + if (ret) { + dev_err(cdns->dev, "failed to register xHCI device\n"); + goto err1; + } + + return 0; +err1: + platform_device_put(xhci); + return ret; +} + +static void cdns3_host_exit(struct cdns3 *cdns) +{ + platform_device_unregister(cdns->host_dev); + cdns->host_dev = NULL; + cdns3_drd_switch_host(cdns, 0); +} + +int cdns3_host_init(struct cdns3 *cdns) +{ + struct cdns3_role_driver *rdrv; + + rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL); + if (!rdrv) + return -ENOMEM; + + rdrv->start = __cdns3_host_init; + rdrv->stop = cdns3_host_exit; + rdrv->state = CDNS3_ROLE_STATE_INACTIVE; + rdrv->name = "host"; + + cdns->roles[USB_ROLE_HOST] = rdrv; + + return 0; +} diff --git a/drivers/usb/cdns3/trace.c b/drivers/usb/cdns3/trace.c new file mode 100644 index 000000000000..459fa72d9c74 --- /dev/null +++ b/drivers/usb/cdns3/trace.c @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USBSS device controller driver Trace Support + * + * Copyright (C) 2018-2019 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ + +#define CREATE_TRACE_POINTS +#include "trace.h" diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h new file mode 100644 index 000000000000..e92348c9b4d7 --- /dev/null +++ b/drivers/usb/cdns3/trace.h @@ -0,0 +1,493 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * USBSS device controller driver. + * Trace support header file. + * + * Copyright (C) 2018-2019 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM cdns3 + +#if !defined(__LINUX_CDNS3_TRACE) || defined(TRACE_HEADER_MULTI_READ) +#define __LINUX_CDNS3_TRACE + +#include <linux/types.h> +#include <linux/tracepoint.h> +#include <asm/byteorder.h> +#include <linux/usb/ch9.h> +#include "core.h" +#include "gadget.h" +#include "debug.h" + +#define CDNS3_MSG_MAX 500 + +TRACE_EVENT(cdns3_halt, + TP_PROTO(struct cdns3_endpoint *ep_priv, u8 halt, u8 flush), + TP_ARGS(ep_priv, halt, flush), + TP_STRUCT__entry( + __string(name, ep_priv->name) + __field(u8, halt) + __field(u8, flush) + ), + TP_fast_assign( + __assign_str(name, ep_priv->name); + __entry->halt = halt; + __entry->flush = flush; + ), + TP_printk("Halt %s for %s: %s", __entry->flush ? " and flush" : "", + __get_str(name), __entry->halt ? "set" : "cleared") +); + +TRACE_EVENT(cdns3_wa1, + TP_PROTO(struct cdns3_endpoint *ep_priv, char *msg), + TP_ARGS(ep_priv, msg), + TP_STRUCT__entry( + __string(ep_name, ep_priv->name) + __string(msg, msg) + ), + TP_fast_assign( + __assign_str(ep_name, ep_priv->name); + __assign_str(msg, msg); + ), + TP_printk("WA1: %s %s", __get_str(ep_name), __get_str(msg)) +); + +TRACE_EVENT(cdns3_wa2, + TP_PROTO(struct cdns3_endpoint *ep_priv, char *msg), + TP_ARGS(ep_priv, msg), + TP_STRUCT__entry( + __string(ep_name, ep_priv->name) + __string(msg, msg) + ), + TP_fast_assign( + __assign_str(ep_name, ep_priv->name); + __assign_str(msg, msg); + ), + TP_printk("WA2: %s %s", __get_str(ep_name), __get_str(msg)) +); + +DECLARE_EVENT_CLASS(cdns3_log_doorbell, + TP_PROTO(const char *ep_name, u32 ep_trbaddr), + TP_ARGS(ep_name, ep_trbaddr), + TP_STRUCT__entry( + __string(name, ep_name) + __field(u32, ep_trbaddr) + ), + TP_fast_assign( + __assign_str(name, ep_name); + __entry->ep_trbaddr = ep_trbaddr; + ), + TP_printk("%s, ep_trbaddr %08x", __get_str(name), + __entry->ep_trbaddr) +); + +DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_ep0, + TP_PROTO(const char *ep_name, u32 ep_trbaddr), + TP_ARGS(ep_name, ep_trbaddr) +); + +DEFINE_EVENT(cdns3_log_doorbell, cdns3_doorbell_epx, + TP_PROTO(const char *ep_name, u32 ep_trbaddr), + TP_ARGS(ep_name, ep_trbaddr) +); + +DECLARE_EVENT_CLASS(cdns3_log_usb_irq, + TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists), + TP_ARGS(priv_dev, usb_ists), + TP_STRUCT__entry( + __field(enum usb_device_speed, speed) + __field(u32, usb_ists) + __dynamic_array(char, str, CDNS3_MSG_MAX) + ), + TP_fast_assign( + __entry->speed = cdns3_get_speed(priv_dev); + __entry->usb_ists = usb_ists; + ), + TP_printk("%s", cdns3_decode_usb_irq(__get_str(str), __entry->speed, + __entry->usb_ists)) +); + +DEFINE_EVENT(cdns3_log_usb_irq, cdns3_usb_irq, + TP_PROTO(struct cdns3_device *priv_dev, u32 usb_ists), + TP_ARGS(priv_dev, usb_ists) +); + +DECLARE_EVENT_CLASS(cdns3_log_epx_irq, + TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_dev, priv_ep), + TP_STRUCT__entry( + __string(ep_name, priv_ep->name) + __field(u32, ep_sts) + __field(u32, ep_traddr) + __dynamic_array(char, str, CDNS3_MSG_MAX) + ), + TP_fast_assign( + __assign_str(ep_name, priv_ep->name); + __entry->ep_sts = readl(&priv_dev->regs->ep_sts); + __entry->ep_traddr = readl(&priv_dev->regs->ep_traddr); + ), + TP_printk("%s, ep_traddr: %08x", + cdns3_decode_epx_irq(__get_str(str), + __get_str(ep_name), + __entry->ep_sts), + __entry->ep_traddr) +); + +DEFINE_EVENT(cdns3_log_epx_irq, cdns3_epx_irq, + TP_PROTO(struct cdns3_device *priv_dev, struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_dev, priv_ep) +); + +DECLARE_EVENT_CLASS(cdns3_log_ep0_irq, + TP_PROTO(struct cdns3_device *priv_dev, u32 ep_sts), + TP_ARGS(priv_dev, ep_sts), + TP_STRUCT__entry( + __field(int, ep_dir) + __field(u32, ep_sts) + __dynamic_array(char, str, CDNS3_MSG_MAX) + ), + TP_fast_assign( + __entry->ep_dir = priv_dev->ep0_data_dir; + __entry->ep_sts = ep_sts; + ), + TP_printk("%s", cdns3_decode_ep0_irq(__get_str(str), + __entry->ep_dir, + __entry->ep_sts)) +); + +DEFINE_EVENT(cdns3_log_ep0_irq, cdns3_ep0_irq, + TP_PROTO(struct cdns3_device *priv_dev, u32 ep_sts), + TP_ARGS(priv_dev, ep_sts) +); + +DECLARE_EVENT_CLASS(cdns3_log_ctrl, + TP_PROTO(struct usb_ctrlrequest *ctrl), + TP_ARGS(ctrl), + TP_STRUCT__entry( + __field(u8, bRequestType) + __field(u8, bRequest) + __field(u16, wValue) + __field(u16, wIndex) + __field(u16, wLength) + __dynamic_array(char, str, CDNS3_MSG_MAX) + ), + TP_fast_assign( + __entry->bRequestType = ctrl->bRequestType; + __entry->bRequest = ctrl->bRequest; + __entry->wValue = le16_to_cpu(ctrl->wValue); + __entry->wIndex = le16_to_cpu(ctrl->wIndex); + __entry->wLength = le16_to_cpu(ctrl->wLength); + ), + TP_printk("%s", usb_decode_ctrl(__get_str(str), CDNS3_MSG_MAX, + __entry->bRequestType, + __entry->bRequest, __entry->wValue, + __entry->wIndex, __entry->wLength) + ) +); + +DEFINE_EVENT(cdns3_log_ctrl, cdns3_ctrl_req, + TP_PROTO(struct usb_ctrlrequest *ctrl), + TP_ARGS(ctrl) +); + +DECLARE_EVENT_CLASS(cdns3_log_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req), + TP_STRUCT__entry( + __string(name, req->priv_ep->name) + __field(struct cdns3_request *, req) + __field(void *, buf) + __field(unsigned int, actual) + __field(unsigned int, length) + __field(int, status) + __field(int, zero) + __field(int, short_not_ok) + __field(int, no_interrupt) + __field(int, start_trb) + __field(int, end_trb) + __field(struct cdns3_trb *, start_trb_addr) + __field(int, flags) + ), + TP_fast_assign( + __assign_str(name, req->priv_ep->name); + __entry->req = req; + __entry->buf = req->request.buf; + __entry->actual = req->request.actual; + __entry->length = req->request.length; + __entry->status = req->request.status; + __entry->zero = req->request.zero; + __entry->short_not_ok = req->request.short_not_ok; + __entry->no_interrupt = req->request.no_interrupt; + __entry->start_trb = req->start_trb; + __entry->end_trb = req->end_trb; + __entry->start_trb_addr = req->trb; + __entry->flags = req->flags; + ), + TP_printk("%s: req: %p, req buff %p, length: %u/%u %s%s%s, status: %d," + " trb: [start:%d, end:%d: virt addr %pa], flags:%x ", + __get_str(name), __entry->req, __entry->buf, __entry->actual, + __entry->length, + __entry->zero ? "Z" : "z", + __entry->short_not_ok ? "S" : "s", + __entry->no_interrupt ? "I" : "i", + __entry->status, + __entry->start_trb, + __entry->end_trb, + __entry->start_trb_addr, + __entry->flags + ) +); + +DEFINE_EVENT(cdns3_log_request, cdns3_alloc_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_log_request, cdns3_free_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_log_request, cdns3_ep_queue, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_log_request, cdns3_ep_dequeue, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_log_request, cdns3_gadget_giveback, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +TRACE_EVENT(cdns3_ep0_queue, + TP_PROTO(struct cdns3_device *dev_priv, struct usb_request *request), + TP_ARGS(dev_priv, request), + TP_STRUCT__entry( + __field(int, dir) + __field(int, length) + ), + TP_fast_assign( + __entry->dir = dev_priv->ep0_data_dir; + __entry->length = request->length; + ), + TP_printk("Queue to ep0%s length: %u", __entry->dir ? "in" : "out", + __entry->length) +); + +DECLARE_EVENT_CLASS(cdns3_log_aligned_request, + TP_PROTO(struct cdns3_request *priv_req), + TP_ARGS(priv_req), + TP_STRUCT__entry( + __string(name, priv_req->priv_ep->name) + __field(struct usb_request *, req) + __field(void *, buf) + __field(dma_addr_t, dma) + __field(void *, aligned_buf) + __field(dma_addr_t, aligned_dma) + __field(u32, aligned_buf_size) + ), + TP_fast_assign( + __assign_str(name, priv_req->priv_ep->name); + __entry->req = &priv_req->request; + __entry->buf = priv_req->request.buf; + __entry->dma = priv_req->request.dma; + __entry->aligned_buf = priv_req->aligned_buf->buf; + __entry->aligned_dma = priv_req->aligned_buf->dma; + __entry->aligned_buf_size = priv_req->aligned_buf->size; + ), + TP_printk("%s: req: %p, req buf %p, dma %pad a_buf %p a_dma %pad, size %d", + __get_str(name), __entry->req, __entry->buf, &__entry->dma, + __entry->aligned_buf, &__entry->aligned_dma, + __entry->aligned_buf_size + ) +); + +DEFINE_EVENT(cdns3_log_aligned_request, cdns3_free_aligned_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DEFINE_EVENT(cdns3_log_aligned_request, cdns3_prepare_aligned_request, + TP_PROTO(struct cdns3_request *req), + TP_ARGS(req) +); + +DECLARE_EVENT_CLASS(cdns3_log_trb, + TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb), + TP_ARGS(priv_ep, trb), + TP_STRUCT__entry( + __string(name, priv_ep->name) + __field(struct cdns3_trb *, trb) + __field(u32, buffer) + __field(u32, length) + __field(u32, control) + __field(u32, type) + ), + TP_fast_assign( + __assign_str(name, priv_ep->name); + __entry->trb = trb; + __entry->buffer = trb->buffer; + __entry->length = trb->length; + __entry->control = trb->control; + __entry->type = usb_endpoint_type(priv_ep->endpoint.desc); + ), + TP_printk("%s: trb %p, dma buf: 0x%08x, size: %ld, burst: %d ctrl: 0x%08x (%s%s%s%s%s%s%s)", + __get_str(name), __entry->trb, __entry->buffer, + TRB_LEN(__entry->length), + (u8)TRB_BURST_LEN_GET(__entry->length), + __entry->control, + __entry->control & TRB_CYCLE ? "C=1, " : "C=0, ", + __entry->control & TRB_TOGGLE ? "T=1, " : "T=0, ", + __entry->control & TRB_ISP ? "ISP, " : "", + __entry->control & TRB_FIFO_MODE ? "FIFO, " : "", + __entry->control & TRB_CHAIN ? "CHAIN, " : "", + __entry->control & TRB_IOC ? "IOC, " : "", + TRB_FIELD_TO_TYPE(__entry->control) == TRB_NORMAL ? "Normal" : "LINK" + ) +); + +DEFINE_EVENT(cdns3_log_trb, cdns3_prepare_trb, + TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb), + TP_ARGS(priv_ep, trb) +); + +DEFINE_EVENT(cdns3_log_trb, cdns3_complete_trb, + TP_PROTO(struct cdns3_endpoint *priv_ep, struct cdns3_trb *trb), + TP_ARGS(priv_ep, trb) +); + +DECLARE_EVENT_CLASS(cdns3_log_ring, + TP_PROTO(struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_ep), + TP_STRUCT__entry( + __dynamic_array(u8, ring, TRB_RING_SIZE) + __dynamic_array(u8, priv_ep, sizeof(struct cdns3_endpoint)) + __dynamic_array(char, buffer, + (TRBS_PER_SEGMENT * 65) + CDNS3_MSG_MAX) + ), + TP_fast_assign( + memcpy(__get_dynamic_array(priv_ep), priv_ep, + sizeof(struct cdns3_endpoint)); + memcpy(__get_dynamic_array(ring), priv_ep->trb_pool, + TRB_RING_SIZE); + ), + + TP_printk("%s", + cdns3_dbg_ring((struct cdns3_endpoint *)__get_str(priv_ep), + (struct cdns3_trb *)__get_str(ring), + __get_str(buffer))) +); + +DEFINE_EVENT(cdns3_log_ring, cdns3_ring, + TP_PROTO(struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_ep) +); + +DECLARE_EVENT_CLASS(cdns3_log_ep, + TP_PROTO(struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_ep), + TP_STRUCT__entry( + __string(name, priv_ep->name) + __field(unsigned int, maxpacket) + __field(unsigned int, maxpacket_limit) + __field(unsigned int, max_streams) + __field(unsigned int, maxburst) + __field(unsigned int, flags) + __field(unsigned int, dir) + __field(u8, enqueue) + __field(u8, dequeue) + ), + TP_fast_assign( + __assign_str(name, priv_ep->name); + __entry->maxpacket = priv_ep->endpoint.maxpacket; + __entry->maxpacket_limit = priv_ep->endpoint.maxpacket_limit; + __entry->max_streams = priv_ep->endpoint.max_streams; + __entry->maxburst = priv_ep->endpoint.maxburst; + __entry->flags = priv_ep->flags; + __entry->dir = priv_ep->dir; + __entry->enqueue = priv_ep->enqueue; + __entry->dequeue = priv_ep->dequeue; + ), + TP_printk("%s: mps: %d/%d. streams: %d, burst: %d, enq idx: %d, " + "deq idx: %d, flags %s%s%s%s%s%s%s%s, dir: %s", + __get_str(name), __entry->maxpacket, + __entry->maxpacket_limit, __entry->max_streams, + __entry->maxburst, __entry->enqueue, + __entry->dequeue, + __entry->flags & EP_ENABLED ? "EN | " : "", + __entry->flags & EP_STALLED ? "STALLED | " : "", + __entry->flags & EP_WEDGE ? "WEDGE | " : "", + __entry->flags & EP_TRANSFER_STARTED ? "STARTED | " : "", + __entry->flags & EP_UPDATE_EP_TRBADDR ? "UPD TRB | " : "", + __entry->flags & EP_PENDING_REQUEST ? "REQ PEN | " : "", + __entry->flags & EP_RING_FULL ? "RING FULL |" : "", + __entry->flags & EP_CLAIMED ? "CLAIMED " : "", + __entry->dir ? "IN" : "OUT" + ) +); + +DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_enable, + TP_PROTO(struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_ep) +); + +DEFINE_EVENT(cdns3_log_ep, cdns3_gadget_ep_disable, + TP_PROTO(struct cdns3_endpoint *priv_ep), + TP_ARGS(priv_ep) +); + +DECLARE_EVENT_CLASS(cdns3_log_request_handled, + TP_PROTO(struct cdns3_request *priv_req, int current_index, + int handled), + TP_ARGS(priv_req, current_index, handled), + TP_STRUCT__entry( + __field(struct cdns3_request *, priv_req) + __field(unsigned int, dma_position) + __field(unsigned int, handled) + __field(unsigned int, dequeue_idx) + __field(unsigned int, enqueue_idx) + __field(unsigned int, start_trb) + __field(unsigned int, end_trb) + ), + TP_fast_assign( + __entry->priv_req = priv_req; + __entry->dma_position = current_index; + __entry->handled = handled; + __entry->dequeue_idx = priv_req->priv_ep->dequeue; + __entry->enqueue_idx = priv_req->priv_ep->enqueue; + __entry->start_trb = priv_req->start_trb; + __entry->end_trb = priv_req->end_trb; + ), + TP_printk("Req: %p %s, DMA pos: %d, ep deq: %d, ep enq: %d," + " start trb: %d, end trb: %d", + __entry->priv_req, + __entry->handled ? "handled" : "not handled", + __entry->dma_position, __entry->dequeue_idx, + __entry->enqueue_idx, __entry->start_trb, + __entry->end_trb + ) +); + +DEFINE_EVENT(cdns3_log_request_handled, cdns3_request_handled, + TP_PROTO(struct cdns3_request *priv_req, int current_index, + int handled), + TP_ARGS(priv_req, current_index, handled) +); +#endif /* __LINUX_CDNS3_TRACE */ + +/* this part must be outside header guard */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . + +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +#include <trace/define_trace.h> diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index eb37ebfcb123..ae850b3fddf2 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -6,6 +6,7 @@ config USB_CHIPIDEA select EXTCON select RESET_CONTROLLER select USB_ULPI_BUS + select USB_ROLE_SWITCH help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. It supports: diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 6a2cc5cd0281..6911aef500e9 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -16,6 +16,7 @@ #include <linux/usb/gadget.h> #include <linux/usb/otg-fsm.h> #include <linux/usb/otg.h> +#include <linux/usb/role.h> #include <linux/ulpi/interface.h> /****************************************************************************** @@ -217,6 +218,7 @@ struct ci_hdrc { ktime_t hr_timeouts[NUM_OTG_FSM_TIMERS]; unsigned enabled_otg_timer_bits; enum otg_fsm_timer next_otg_timer; + struct usb_role_switch *role_switch; struct work_struct work; struct workqueue_struct *wq; @@ -290,6 +292,16 @@ static inline void ci_role_stop(struct ci_hdrc *ci) ci->roles[role]->stop(ci); } +static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci) +{ + if (ci->role == CI_ROLE_HOST) + return USB_ROLE_HOST; + else if (ci->role == CI_ROLE_GADGET && ci->vbus_active) + return USB_ROLE_DEVICE; + else + return USB_ROLE_NONE; +} + /** * hw_read_id_reg: reads from a identification register * @ci: the controller diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c index bb4645a8ca46..af648ba6544d 100644 --- a/drivers/usb/chipidea/ci_hdrc_msm.c +++ b/drivers/usb/chipidea/ci_hdrc_msm.c @@ -216,13 +216,13 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev) ci->rcdev.ops = &ci_hdrc_msm_reset_ops; ci->rcdev.of_node = pdev->dev.of_node; ci->rcdev.nr_resets = 2; - ret = reset_controller_register(&ci->rcdev); + ret = devm_reset_controller_register(&pdev->dev, &ci->rcdev); if (ret) return ret; ret = clk_prepare_enable(ci->fs_clk); if (ret) - goto err_fs; + return ret; reset_control_assert(reset); usleep_range(10000, 12000); @@ -232,7 +232,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev) ret = clk_prepare_enable(ci->core_clk); if (ret) - goto err_fs; + return ret; ret = clk_prepare_enable(ci->iface_clk); if (ret) @@ -271,8 +271,6 @@ err_mux: clk_disable_unprepare(ci->iface_clk); err_iface: clk_disable_unprepare(ci->core_clk); -err_fs: - reset_controller_unregister(&ci->rcdev); return ret; } @@ -284,7 +282,6 @@ static int ci_hdrc_msm_remove(struct platform_device *pdev) ci_hdrc_remove_device(ci->ci); clk_disable_unprepare(ci->iface_clk); clk_disable_unprepare(ci->core_clk); - reset_controller_unregister(&ci->rcdev); return 0; } diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 26062d610c20..98ee575ee500 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -600,6 +600,71 @@ static int ci_cable_notifier(struct notifier_block *nb, unsigned long event, return NOTIFY_DONE; } +static enum usb_role ci_usb_role_switch_get(struct device *dev) +{ + struct ci_hdrc *ci = dev_get_drvdata(dev); + enum usb_role role; + unsigned long flags; + + spin_lock_irqsave(&ci->lock, flags); + role = ci_role_to_usb_role(ci); + spin_unlock_irqrestore(&ci->lock, flags); + + return role; +} + +static int ci_usb_role_switch_set(struct device *dev, enum usb_role role) +{ + struct ci_hdrc *ci = dev_get_drvdata(dev); + struct ci_hdrc_cable *cable = NULL; + enum usb_role current_role = ci_role_to_usb_role(ci); + unsigned long flags; + + if (current_role == role) + return 0; + + pm_runtime_get_sync(ci->dev); + /* Stop current role */ + spin_lock_irqsave(&ci->lock, flags); + if (current_role == USB_ROLE_DEVICE) + cable = &ci->platdata->vbus_extcon; + else if (current_role == USB_ROLE_HOST) + cable = &ci->platdata->id_extcon; + + if (cable) { + cable->changed = true; + cable->connected = false; + ci_irq(ci->irq, ci); + spin_unlock_irqrestore(&ci->lock, flags); + if (ci->wq && role != USB_ROLE_NONE) + flush_workqueue(ci->wq); + spin_lock_irqsave(&ci->lock, flags); + } + + cable = NULL; + + /* Start target role */ + if (role == USB_ROLE_DEVICE) + cable = &ci->platdata->vbus_extcon; + else if (role == USB_ROLE_HOST) + cable = &ci->platdata->id_extcon; + + if (cable) { + cable->changed = true; + cable->connected = true; + ci_irq(ci->irq, ci); + } + spin_unlock_irqrestore(&ci->lock, flags); + pm_runtime_put_sync(ci->dev); + + return 0; +} + +static struct usb_role_switch_desc ci_role_switch = { + .set = ci_usb_role_switch_set, + .get = ci_usb_role_switch_get, +}; + static int ci_get_platdata(struct device *dev, struct ci_hdrc_platform_data *platdata) { @@ -726,6 +791,9 @@ static int ci_get_platdata(struct device *dev, cable->connected = false; } + if (device_property_read_bool(dev, "usb-role-switch")) + ci_role_switch.fwnode = dev->fwnode; + platdata->pctl = devm_pinctrl_get(dev); if (!IS_ERR(platdata->pctl)) { struct pinctrl_state *p; @@ -903,10 +971,7 @@ static struct attribute *ci_attrs[] = { &dev_attr_role.attr, NULL, }; - -static const struct attribute_group ci_attr_group = { - .attrs = ci_attrs, -}; +ATTRIBUTE_GROUPS(ci); static int ci_hdrc_probe(struct platform_device *pdev) { @@ -1008,7 +1073,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) ci->irq = platform_get_irq(pdev, 0); if (ci->irq < 0) { - dev_err(dev, "missing IRQ\n"); ret = ci->irq; goto deinit_phy; } @@ -1051,6 +1115,15 @@ static int ci_hdrc_probe(struct platform_device *pdev) } } + if (ci_role_switch.fwnode) { + ci->role_switch = usb_role_switch_register(dev, + &ci_role_switch); + if (IS_ERR(ci->role_switch)) { + ret = PTR_ERR(ci->role_switch); + goto deinit_otg; + } + } + if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) { if (ci->is_otg) { ci->role = ci_otg_role(ci); @@ -1106,15 +1179,12 @@ static int ci_hdrc_probe(struct platform_device *pdev) device_set_wakeup_capable(&pdev->dev, true); dbg_create_files(ci); - ret = sysfs_create_group(&dev->kobj, &ci_attr_group); - if (ret) - goto remove_debug; - return 0; -remove_debug: - dbg_remove_files(ci); stop: + if (ci->role_switch) + usb_role_switch_unregister(ci->role_switch); +deinit_otg: if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) ci_hdrc_otg_destroy(ci); deinit_gadget: @@ -1133,6 +1203,9 @@ static int ci_hdrc_remove(struct platform_device *pdev) { struct ci_hdrc *ci = platform_get_drvdata(pdev); + if (ci->role_switch) + usb_role_switch_unregister(ci->role_switch); + if (ci->supports_runtime_pm) { pm_runtime_get_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -1140,7 +1213,6 @@ static int ci_hdrc_remove(struct platform_device *pdev) } dbg_remove_files(ci); - sysfs_remove_group(&ci->dev->kobj, &ci_attr_group); ci_role_destroy(ci); ci_hdrc_enter_lpm(ci, true); ci_usb_phy_exit(ci); @@ -1319,6 +1391,7 @@ static struct platform_driver ci_hdrc_driver = { .driver = { .name = "ci_hdrc", .pm = &ci_pm_ops, + .dev_groups = ci_groups, }, }; diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index f25d4827fd49..fbfb02e05c97 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -35,7 +35,7 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) * detection overwrite OTGSC register value */ cable = &ci->platdata->vbus_extcon; - if (!IS_ERR(cable->edev)) { + if (!IS_ERR(cable->edev) || ci->role_switch) { if (cable->changed) val |= OTGSC_BSVIS; else @@ -53,7 +53,7 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) } cable = &ci->platdata->id_extcon; - if (!IS_ERR(cable->edev)) { + if (!IS_ERR(cable->edev) || ci->role_switch) { if (cable->changed) val |= OTGSC_IDIS; else @@ -83,7 +83,7 @@ void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data) struct ci_hdrc_cable *cable; cable = &ci->platdata->vbus_extcon; - if (!IS_ERR(cable->edev)) { + if (!IS_ERR(cable->edev) || ci->role_switch) { if (data & mask & OTGSC_BSVIS) cable->changed = false; @@ -97,7 +97,7 @@ void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data) } cable = &ci->platdata->id_extcon; - if (!IS_ERR(cable->edev)) { + if (!IS_ERR(cable->edev) || ci->role_switch) { if (data & mask & OTGSC_IDIS) cable->changed = false; diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 6a5ee8e6da10..8f18e7b6cadf 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -709,12 +709,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); unsigned long flags; - spin_lock_irqsave(&ci->lock, flags); - ci->gadget.speed = USB_SPEED_UNKNOWN; - ci->remote_wakeup = 0; - ci->suspended = 0; - spin_unlock_irqrestore(&ci->lock, flags); - /* flush all endpoints */ gadget_for_each_ep(ep, gadget) { usb_ep_fifo_flush(ep); @@ -732,6 +726,12 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) ci->status = NULL; } + spin_lock_irqsave(&ci->lock, flags); + ci->gadget.speed = USB_SPEED_UNKNOWN; + ci->remote_wakeup = 0; + ci->suspended = 0; + spin_unlock_irqrestore(&ci->lock, flags); + return 0; } @@ -1303,6 +1303,10 @@ static int ep_disable(struct usb_ep *ep) return -EBUSY; spin_lock_irqsave(hwep->lock, flags); + if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) { + spin_unlock_irqrestore(hwep->lock, flags); + return 0; + } /* only internal SW should disable ctrl endpts */ @@ -1392,6 +1396,10 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, return -EINVAL; spin_lock_irqsave(hwep->lock, flags); + if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) { + spin_unlock_irqrestore(hwep->lock, flags); + return 0; + } retval = _ep_queue(ep, req, gfp_flags); spin_unlock_irqrestore(hwep->lock, flags); return retval; @@ -1415,8 +1423,8 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) return -EINVAL; spin_lock_irqsave(hwep->lock, flags); - - hw_ep_flush(hwep->ci, hwep->num, hwep->dir); + if (hwep->ci->gadget.speed != USB_SPEED_UNKNOWN) + hw_ep_flush(hwep->ci, hwep->num, hwep->dir); list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) { dma_pool_free(hwep->td_pool, node->ptr, node->dma); @@ -1487,6 +1495,10 @@ static void ep_fifo_flush(struct usb_ep *ep) } spin_lock_irqsave(hwep->lock, flags); + if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) { + spin_unlock_irqrestore(hwep->lock, flags); + return; + } hw_ep_flush(hwep->ci, hwep->num, hwep->dir); @@ -1559,6 +1571,10 @@ static int ci_udc_wakeup(struct usb_gadget *_gadget) int ret = 0; spin_lock_irqsave(&ci->lock, flags); + if (ci->gadget.speed == USB_SPEED_UNKNOWN) { + spin_unlock_irqrestore(&ci->lock, flags); + return 0; + } if (!ci->remote_wakeup) { ret = -EOPNOTSUPP; goto out; @@ -1746,12 +1762,11 @@ static int ci_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); - int retval = -ENOMEM; + int retval; if (driver->disconnect == NULL) return -EINVAL; - ci->ep0out->ep.desc = &ctrl_endpt_out_desc; retval = usb_ep_enable(&ci->ep0out->ep); if (retval) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index a7824a51f86d..70afb2ca1eab 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -587,10 +587,20 @@ static int wdm_flush(struct file *file, fl_owner_t id) { struct wdm_device *desc = file->private_data; - wait_event(desc->wait, !test_bit(WDM_IN_USE, &desc->flags)); + wait_event(desc->wait, + /* + * needs both flags. We cannot do with one + * because resetting it would cause a race + * with write() yet we need to signal + * a disconnect + */ + !test_bit(WDM_IN_USE, &desc->flags) || + test_bit(WDM_DISCONNECTING, &desc->flags)); /* cannot dereference desc->intf if WDM_DISCONNECTING */ - if (desc->werr < 0 && !test_bit(WDM_DISCONNECTING, &desc->flags)) + if (test_bit(WDM_DISCONNECTING, &desc->flags)) + return -ENODEV; + if (desc->werr < 0) dev_err(&desc->intf->dev, "Error in flush path: %d\n", desc->werr); @@ -974,8 +984,6 @@ static void wdm_disconnect(struct usb_interface *intf) spin_lock_irqsave(&desc->iuspin, flags); set_bit(WDM_DISCONNECTING, &desc->flags); set_bit(WDM_READ, &desc->flags); - /* to terminate pending flushes */ - clear_bit(WDM_IN_USE, &desc->flags); spin_unlock_irqrestore(&desc->iuspin, flags); wake_up_all(&desc->wait); mutex_lock(&desc->rlock); diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 407a7a6198a2..7fea4999d352 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -1082,6 +1082,12 @@ static ssize_t ieee1284_id_show(struct device *dev, struct device_attribute *att static DEVICE_ATTR_RO(ieee1284_id); +static struct attribute *usblp_attrs[] = { + &dev_attr_ieee1284_id.attr, + NULL, +}; +ATTRIBUTE_GROUPS(usblp); + static int usblp_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1156,9 +1162,6 @@ static int usblp_probe(struct usb_interface *intf, /* Retrieve and store the device ID string. */ usblp_cache_device_id_string(usblp); - retval = device_create_file(&intf->dev, &dev_attr_ieee1284_id); - if (retval) - goto abort_intfdata; #ifdef DEBUG usblp_check_status(usblp, 0); @@ -1189,7 +1192,6 @@ static int usblp_probe(struct usb_interface *intf, abort_intfdata: usb_set_intfdata(intf, NULL); - device_remove_file(&intf->dev, &dev_attr_ieee1284_id); abort: kfree(usblp->readbuf); kfree(usblp->statusbuf); @@ -1360,8 +1362,6 @@ static void usblp_disconnect(struct usb_interface *intf) BUG(); } - device_remove_file(&intf->dev, &dev_attr_ieee1284_id); - mutex_lock(&usblp_mutex); mutex_lock(&usblp->mut); usblp->present = 0; @@ -1421,6 +1421,7 @@ static struct usb_driver usblp_driver = { .suspend = usblp_suspend, .resume = usblp_resume, .id_table = usblp_ids, + .dev_groups = usblp_groups, .supports_autosuspend = 1, }; diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 4942122b2346..dcd7066ffba2 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -1836,17 +1836,14 @@ capability_attribute(device_capabilities); capability_attribute(usb488_interface_capabilities); capability_attribute(usb488_device_capabilities); -static struct attribute *capability_attrs[] = { +static struct attribute *usbtmc_attrs[] = { &dev_attr_interface_capabilities.attr, &dev_attr_device_capabilities.attr, &dev_attr_usb488_interface_capabilities.attr, &dev_attr_usb488_device_capabilities.attr, NULL, }; - -static const struct attribute_group capability_attr_grp = { - .attrs = capability_attrs, -}; +ATTRIBUTE_GROUPS(usbtmc); static int usbtmc_ioctl_indicator_pulse(struct usbtmc_device_data *data) { @@ -2362,8 +2359,11 @@ static int usbtmc_probe(struct usb_interface *intf, goto err_put; } + retcode = -EINVAL; data->bulk_in = bulk_in->bEndpointAddress; data->wMaxPacketSize = usb_endpoint_maxp(bulk_in); + if (!data->wMaxPacketSize) + goto err_put; dev_dbg(&intf->dev, "Found bulk in endpoint at %u\n", data->bulk_in); data->bulk_out = bulk_out->bEndpointAddress; @@ -2383,9 +2383,6 @@ static int usbtmc_probe(struct usb_interface *intf, retcode = get_capabilities(data); if (retcode) dev_err(&intf->dev, "can't read capabilities\n"); - else - retcode = sysfs_create_group(&intf->dev.kobj, - &capability_attr_grp); if (data->iin_ep_present) { /* allocate int urb */ @@ -2432,7 +2429,6 @@ static int usbtmc_probe(struct usb_interface *intf, return 0; error_register: - sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp); usbtmc_free_int(data); err_put: kref_put(&data->kref, usbtmc_delete); @@ -2445,7 +2441,6 @@ static void usbtmc_disconnect(struct usb_interface *intf) struct list_head *elem; usb_deregister_dev(intf, &usbtmc_class); - sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp); mutex_lock(&data->io_mutex); data->zombie = 1; wake_up_interruptible_all(&data->waitq); @@ -2551,6 +2546,7 @@ static struct usb_driver usbtmc_driver = { .resume = usbtmc_resume, .pre_reset = usbtmc_pre_reset, .post_reset = usbtmc_post_reset, + .dev_groups = usbtmc_groups, }; module_usb_driver(usbtmc_driver); diff --git a/drivers/usb/common/Kconfig b/drivers/usb/common/Kconfig new file mode 100644 index 000000000000..d611477aae41 --- /dev/null +++ b/drivers/usb/common/Kconfig @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 + +config USB_COMMON + tristate + + +config USB_LED_TRIG + bool "USB LED Triggers" + depends on LEDS_CLASS && LEDS_TRIGGERS + select USB_COMMON + help + This option adds LED triggers for USB host and/or gadget activity. + + Say Y here if you are working on a system with led-class supported + LEDs and you want to use them as activity indicators for USB host or + gadget. + +config USB_ULPI_BUS + tristate "USB ULPI PHY interface support" + select USB_COMMON + help + UTMI+ Low Pin Interface (ULPI) is specification for a commonly used + USB 2.0 PHY interface. The ULPI specification defines a standard set + of registers that can be used to detect the vendor and product which + allows ULPI to be handled as a bus. This module is the driver for that + bus. + + The ULPI interfaces (the buses) are registered by the drivers for USB + controllers which support ULPI register access and have ULPI PHY + attached to them. The ULPI PHY drivers themselves are normal PHY + drivers. + + ULPI PHYs provide often functions such as ADP sensing/probing (OTG + protocol) and USB charger detection. + + To compile this driver as a module, choose M here: the module will + be called ulpi. + +config USB_CONN_GPIO + tristate "USB GPIO Based Connection Detection Driver" + depends on GPIOLIB + select USB_ROLE_SWITCH + help + The driver supports USB role switch between host and device via GPIO + based USB cable detection, used typically if an input GPIO is used + to detect USB ID pin, and another input GPIO may be also used to detect + Vbus pin at the same time, it also can be used to enable/disable + device if an input GPIO is only used to detect Vbus pin. + + To compile the driver as a module, choose M here: the module will + be called usb-conn-gpio.ko diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile index 0a7c45e85481..8ac4d21ef5c8 100644 --- a/drivers/usb/common/Makefile +++ b/drivers/usb/common/Makefile @@ -5,7 +5,9 @@ obj-$(CONFIG_USB_COMMON) += usb-common.o usb-common-y += common.o +usb-common-$(CONFIG_TRACING) += debug.o usb-common-$(CONFIG_USB_LED_TRIG) += led.o +obj-$(CONFIG_USB_CONN_GPIO) += usb-conn-gpio.o obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o diff --git a/drivers/usb/common/debug.c b/drivers/usb/common/debug.c new file mode 100644 index 000000000000..92a986aeaa5d --- /dev/null +++ b/drivers/usb/common/debug.c @@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * Common USB debugging functions + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + */ + +#include <linux/usb/ch9.h> + +static void usb_decode_get_status(__u8 bRequestType, __u16 wIndex, + __u16 wLength, char *str, size_t size) +{ + switch (bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + snprintf(str, size, "Get Device Status(Length = %d)", wLength); + break; + case USB_RECIP_INTERFACE: + snprintf(str, size, + "Get Interface Status(Intf = %d, Length = %d)", + wIndex, wLength); + break; + case USB_RECIP_ENDPOINT: + snprintf(str, size, "Get Endpoint Status(ep%d%s)", + wIndex & ~USB_DIR_IN, + wIndex & USB_DIR_IN ? "in" : "out"); + break; + } +} + +static const char *usb_decode_device_feature(u16 wValue) +{ + switch (wValue) { + case USB_DEVICE_SELF_POWERED: + return "Self Powered"; + case USB_DEVICE_REMOTE_WAKEUP: + return "Remote Wakeup"; + case USB_DEVICE_TEST_MODE: + return "Test Mode"; + case USB_DEVICE_U1_ENABLE: + return "U1 Enable"; + case USB_DEVICE_U2_ENABLE: + return "U2 Enable"; + case USB_DEVICE_LTM_ENABLE: + return "LTM Enable"; + default: + return "UNKNOWN"; + } +} + +static const char *usb_decode_test_mode(u16 wIndex) +{ + switch (wIndex) { + case TEST_J: + return ": TEST_J"; + case TEST_K: + return ": TEST_K"; + case TEST_SE0_NAK: + return ": TEST_SE0_NAK"; + case TEST_PACKET: + return ": TEST_PACKET"; + case TEST_FORCE_EN: + return ": TEST_FORCE_EN"; + default: + return ": UNKNOWN"; + } +} + +static void usb_decode_set_clear_feature(__u8 bRequestType, + __u8 bRequest, __u16 wValue, + __u16 wIndex, char *str, size_t size) +{ + switch (bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + snprintf(str, size, "%s Device Feature(%s%s)", + bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", + usb_decode_device_feature(wValue), + wValue == USB_DEVICE_TEST_MODE ? + usb_decode_test_mode(wIndex) : ""); + break; + case USB_RECIP_INTERFACE: + snprintf(str, size, "%s Interface Feature(%s)", + bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", + wValue == USB_INTRF_FUNC_SUSPEND ? + "Function Suspend" : "UNKNOWN"); + break; + case USB_RECIP_ENDPOINT: + snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)", + bRequest == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", + wValue == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN", + wIndex & ~USB_DIR_IN, + wIndex & USB_DIR_IN ? "in" : "out"); + break; + } +} + +static void usb_decode_set_address(__u16 wValue, char *str, size_t size) +{ + snprintf(str, size, "Set Address(Addr = %02x)", wValue); +} + +static void usb_decode_get_set_descriptor(__u8 bRequestType, __u8 bRequest, + __u16 wValue, __u16 wIndex, + __u16 wLength, char *str, size_t size) +{ + char *s; + + switch (wValue >> 8) { + case USB_DT_DEVICE: + s = "Device"; + break; + case USB_DT_CONFIG: + s = "Configuration"; + break; + case USB_DT_STRING: + s = "String"; + break; + case USB_DT_INTERFACE: + s = "Interface"; + break; + case USB_DT_ENDPOINT: + s = "Endpoint"; + break; + case USB_DT_DEVICE_QUALIFIER: + s = "Device Qualifier"; + break; + case USB_DT_OTHER_SPEED_CONFIG: + s = "Other Speed Config"; + break; + case USB_DT_INTERFACE_POWER: + s = "Interface Power"; + break; + case USB_DT_OTG: + s = "OTG"; + break; + case USB_DT_DEBUG: + s = "Debug"; + break; + case USB_DT_INTERFACE_ASSOCIATION: + s = "Interface Association"; + break; + case USB_DT_BOS: + s = "BOS"; + break; + case USB_DT_DEVICE_CAPABILITY: + s = "Device Capability"; + break; + case USB_DT_PIPE_USAGE: + s = "Pipe Usage"; + break; + case USB_DT_SS_ENDPOINT_COMP: + s = "SS Endpoint Companion"; + break; + case USB_DT_SSP_ISOC_ENDPOINT_COMP: + s = "SSP Isochronous Endpoint Companion"; + break; + default: + s = "UNKNOWN"; + break; + } + + snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)", + bRequest == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set", + s, wValue & 0xff, wLength); +} + +static void usb_decode_get_configuration(__u16 wLength, char *str, size_t size) +{ + snprintf(str, size, "Get Configuration(Length = %d)", wLength); +} + +static void usb_decode_set_configuration(__u8 wValue, char *str, size_t size) +{ + snprintf(str, size, "Set Configuration(Config = %d)", wValue); +} + +static void usb_decode_get_intf(__u16 wIndex, __u16 wLength, char *str, + size_t size) +{ + snprintf(str, size, "Get Interface(Intf = %d, Length = %d)", + wIndex, wLength); +} + +static void usb_decode_set_intf(__u8 wValue, __u16 wIndex, char *str, + size_t size) +{ + snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)", + wIndex, wValue); +} + +static void usb_decode_synch_frame(__u16 wIndex, __u16 wLength, + char *str, size_t size) +{ + snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)", + wIndex, wLength); +} + +static void usb_decode_set_sel(__u16 wLength, char *str, size_t size) +{ + snprintf(str, size, "Set SEL(Length = %d)", wLength); +} + +static void usb_decode_set_isoch_delay(__u8 wValue, char *str, size_t size) +{ + snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", wValue); +} + +/** + * usb_decode_ctrl - returns a string representation of ctrl request + */ +const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType, + __u8 bRequest, __u16 wValue, __u16 wIndex, + __u16 wLength) +{ + switch (bRequest) { + case USB_REQ_GET_STATUS: + usb_decode_get_status(bRequestType, wIndex, wLength, str, size); + break; + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + usb_decode_set_clear_feature(bRequestType, bRequest, wValue, + wIndex, str, size); + break; + case USB_REQ_SET_ADDRESS: + usb_decode_set_address(wValue, str, size); + break; + case USB_REQ_GET_DESCRIPTOR: + case USB_REQ_SET_DESCRIPTOR: + usb_decode_get_set_descriptor(bRequestType, bRequest, wValue, + wIndex, wLength, str, size); + break; + case USB_REQ_GET_CONFIGURATION: + usb_decode_get_configuration(wLength, str, size); + break; + case USB_REQ_SET_CONFIGURATION: + usb_decode_set_configuration(wValue, str, size); + break; + case USB_REQ_GET_INTERFACE: + usb_decode_get_intf(wIndex, wLength, str, size); + break; + case USB_REQ_SET_INTERFACE: + usb_decode_set_intf(wValue, wIndex, str, size); + break; + case USB_REQ_SYNCH_FRAME: + usb_decode_synch_frame(wIndex, wLength, str, size); + break; + case USB_REQ_SET_SEL: + usb_decode_set_sel(wLength, str, size); + break; + case USB_REQ_SET_ISOCH_DELAY: + usb_decode_set_isoch_delay(wValue, str, size); + break; + default: + snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x", + bRequestType, bRequest, + (u8)(cpu_to_le16(wValue) & 0xff), + (u8)(cpu_to_le16(wValue) >> 8), + (u8)(cpu_to_le16(wIndex) & 0xff), + (u8)(cpu_to_le16(wIndex) >> 8), + (u8)(cpu_to_le16(wLength) & 0xff), + (u8)(cpu_to_le16(wLength) >> 8)); + } + + return str; +} +EXPORT_SYMBOL_GPL(usb_decode_ctrl); diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c new file mode 100644 index 000000000000..87338f9eb5be --- /dev/null +++ b/drivers/usb/common/usb-conn-gpio.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB GPIO Based Connection Detection Driver + * + * Copyright (C) 2019 MediaTek Inc. + * + * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> + * + * Some code borrowed from drivers/extcon/extcon-usb-gpio.c + */ + +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pinctrl/consumer.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/role.h> + +#define USB_GPIO_DEB_MS 20 /* ms */ +#define USB_GPIO_DEB_US ((USB_GPIO_DEB_MS) * 1000) /* us */ + +#define USB_CONN_IRQF \ + (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT) + +struct usb_conn_info { + struct device *dev; + struct usb_role_switch *role_sw; + enum usb_role last_role; + struct regulator *vbus; + struct delayed_work dw_det; + unsigned long debounce_jiffies; + + struct gpio_desc *id_gpiod; + struct gpio_desc *vbus_gpiod; + int id_irq; + int vbus_irq; +}; + +/** + * "DEVICE" = VBUS and "HOST" = !ID, so we have: + * Both "DEVICE" and "HOST" can't be set as active at the same time + * so if "HOST" is active (i.e. ID is 0) we keep "DEVICE" inactive + * even if VBUS is on. + * + * Role | ID | VBUS + * ------------------------------------ + * [1] DEVICE | H | H + * [2] NONE | H | L + * [3] HOST | L | H + * [4] HOST | L | L + * + * In case we have only one of these signals: + * - VBUS only - we want to distinguish between [1] and [2], so ID is always 1 + * - ID only - we want to distinguish between [1] and [4], so VBUS = ID + */ +static void usb_conn_detect_cable(struct work_struct *work) +{ + struct usb_conn_info *info; + enum usb_role role; + int id, vbus, ret; + + info = container_of(to_delayed_work(work), + struct usb_conn_info, dw_det); + + /* check ID and VBUS */ + id = info->id_gpiod ? + gpiod_get_value_cansleep(info->id_gpiod) : 1; + vbus = info->vbus_gpiod ? + gpiod_get_value_cansleep(info->vbus_gpiod) : id; + + if (!id) + role = USB_ROLE_HOST; + else if (vbus) + role = USB_ROLE_DEVICE; + else + role = USB_ROLE_NONE; + + dev_dbg(info->dev, "role %d/%d, gpios: id %d, vbus %d\n", + info->last_role, role, id, vbus); + + if (info->last_role == role) { + dev_warn(info->dev, "repeated role: %d\n", role); + return; + } + + if (info->last_role == USB_ROLE_HOST) + regulator_disable(info->vbus); + + ret = usb_role_switch_set_role(info->role_sw, role); + if (ret) + dev_err(info->dev, "failed to set role: %d\n", ret); + + if (role == USB_ROLE_HOST) { + ret = regulator_enable(info->vbus); + if (ret) + dev_err(info->dev, "enable vbus regulator failed\n"); + } + + info->last_role = role; + + dev_dbg(info->dev, "vbus regulator is %s\n", + regulator_is_enabled(info->vbus) ? "enabled" : "disabled"); +} + +static void usb_conn_queue_dwork(struct usb_conn_info *info, + unsigned long delay) +{ + queue_delayed_work(system_power_efficient_wq, &info->dw_det, delay); +} + +static irqreturn_t usb_conn_isr(int irq, void *dev_id) +{ + struct usb_conn_info *info = dev_id; + + usb_conn_queue_dwork(info, info->debounce_jiffies); + + return IRQ_HANDLED; +} + +static int usb_conn_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usb_conn_info *info; + int ret = 0; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = dev; + info->id_gpiod = devm_gpiod_get_optional(dev, "id", GPIOD_IN); + if (IS_ERR(info->id_gpiod)) + return PTR_ERR(info->id_gpiod); + + info->vbus_gpiod = devm_gpiod_get_optional(dev, "vbus", GPIOD_IN); + if (IS_ERR(info->vbus_gpiod)) + return PTR_ERR(info->vbus_gpiod); + + if (!info->id_gpiod && !info->vbus_gpiod) { + dev_err(dev, "failed to get gpios\n"); + return -ENODEV; + } + + if (info->id_gpiod) + ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEB_US); + if (!ret && info->vbus_gpiod) + ret = gpiod_set_debounce(info->vbus_gpiod, USB_GPIO_DEB_US); + if (ret < 0) + info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEB_MS); + + INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable); + + info->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(info->vbus)) { + dev_err(dev, "failed to get vbus\n"); + return PTR_ERR(info->vbus); + } + + info->role_sw = usb_role_switch_get(dev); + if (IS_ERR(info->role_sw)) { + if (PTR_ERR(info->role_sw) != -EPROBE_DEFER) + dev_err(dev, "failed to get role switch\n"); + + return PTR_ERR(info->role_sw); + } + + if (info->id_gpiod) { + info->id_irq = gpiod_to_irq(info->id_gpiod); + if (info->id_irq < 0) { + dev_err(dev, "failed to get ID IRQ\n"); + ret = info->id_irq; + goto put_role_sw; + } + + ret = devm_request_threaded_irq(dev, info->id_irq, NULL, + usb_conn_isr, USB_CONN_IRQF, + pdev->name, info); + if (ret < 0) { + dev_err(dev, "failed to request ID IRQ\n"); + goto put_role_sw; + } + } + + if (info->vbus_gpiod) { + info->vbus_irq = gpiod_to_irq(info->vbus_gpiod); + if (info->vbus_irq < 0) { + dev_err(dev, "failed to get VBUS IRQ\n"); + ret = info->vbus_irq; + goto put_role_sw; + } + + ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL, + usb_conn_isr, USB_CONN_IRQF, + pdev->name, info); + if (ret < 0) { + dev_err(dev, "failed to request VBUS IRQ\n"); + goto put_role_sw; + } + } + + platform_set_drvdata(pdev, info); + + /* Perform initial detection */ + usb_conn_queue_dwork(info, 0); + + return 0; + +put_role_sw: + usb_role_switch_put(info->role_sw); + return ret; +} + +static int usb_conn_remove(struct platform_device *pdev) +{ + struct usb_conn_info *info = platform_get_drvdata(pdev); + + cancel_delayed_work_sync(&info->dw_det); + + if (info->last_role == USB_ROLE_HOST) + regulator_disable(info->vbus); + + usb_role_switch_put(info->role_sw); + + return 0; +} + +static int __maybe_unused usb_conn_suspend(struct device *dev) +{ + struct usb_conn_info *info = dev_get_drvdata(dev); + + if (info->id_gpiod) + disable_irq(info->id_irq); + if (info->vbus_gpiod) + disable_irq(info->vbus_irq); + + pinctrl_pm_select_sleep_state(dev); + + return 0; +} + +static int __maybe_unused usb_conn_resume(struct device *dev) +{ + struct usb_conn_info *info = dev_get_drvdata(dev); + + pinctrl_pm_select_default_state(dev); + + if (info->id_gpiod) + enable_irq(info->id_irq); + if (info->vbus_gpiod) + enable_irq(info->vbus_irq); + + usb_conn_queue_dwork(info, 0); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(usb_conn_pm_ops, + usb_conn_suspend, usb_conn_resume); + +static const struct of_device_id usb_conn_dt_match[] = { + { .compatible = "gpio-usb-b-connector", }, + { } +}; +MODULE_DEVICE_TABLE(of, usb_conn_dt_match); + +static struct platform_driver usb_conn_driver = { + .probe = usb_conn_probe, + .remove = usb_conn_remove, + .driver = { + .name = "usb-conn-gpio", + .pm = &usb_conn_pm_ops, + .of_match_table = usb_conn_dt_match, + }, +}; + +module_platform_driver(usb_conn_driver); + +MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); +MODULE_DESCRIPTION("USB GPIO based connection detection driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 9d6cb709ca7b..151a74a54386 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -921,7 +921,7 @@ int usb_get_bos_descriptor(struct usb_device *dev) struct usb_bos_descriptor *bos; struct usb_dev_cap_header *cap; struct usb_ssp_cap_descriptor *ssp_cap; - unsigned char *buffer; + unsigned char *buffer, *buffer0; int length, total_len, num, i, ssac; __u8 cap_type; int ret; @@ -966,10 +966,12 @@ int usb_get_bos_descriptor(struct usb_device *dev) ret = -ENOMSG; goto err; } + + buffer0 = buffer; total_len -= length; + buffer += length; for (i = 0; i < num; i++) { - buffer += length; cap = (struct usb_dev_cap_header *)buffer; if (total_len < sizeof(*cap) || total_len < cap->bLength) { @@ -983,8 +985,6 @@ int usb_get_bos_descriptor(struct usb_device *dev) break; } - total_len -= length; - if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) { dev_warn(ddev, "descriptor type invalid, skip\n"); continue; @@ -1019,7 +1019,11 @@ int usb_get_bos_descriptor(struct usb_device *dev) default: break; } + + total_len -= length; + buffer += length; } + dev->bos->desc->wTotalLength = cpu_to_le16(buffer - buffer0); return 0; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 9063ede411ae..3f899552f6e3 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -44,10 +44,19 @@ #include "usb.h" +#ifdef CONFIG_PM +#define MAYBE_CAP_SUSPEND USBDEVFS_CAP_SUSPEND +#else +#define MAYBE_CAP_SUSPEND 0 +#endif + #define USB_MAXBUS 64 #define USB_DEVICE_MAX (USB_MAXBUS * 128) #define USB_SG_SIZE 16384 /* split-size for large txs */ +/* Mutual exclusion for ps->list in resume vs. release and remove */ +static DEFINE_MUTEX(usbfs_mutex); + struct usb_dev_state { struct list_head list; /* state list */ struct usb_device *dev; @@ -57,14 +66,17 @@ struct usb_dev_state { struct list_head async_completed; struct list_head memory_list; wait_queue_head_t wait; /* wake up if a request completed */ + wait_queue_head_t wait_for_resume; /* wake up upon runtime resume */ unsigned int discsignr; struct pid *disc_pid; const struct cred *cred; sigval_t disccontext; unsigned long ifclaimed; u32 disabled_bulk_eps; - bool privileges_dropped; unsigned long interface_allowed_mask; + int not_yet_resumed; + bool suspend_allowed; + bool privileges_dropped; }; struct usb_memory { @@ -694,9 +706,7 @@ static void driver_disconnect(struct usb_interface *intf) destroy_async_on_interface(ps, ifnum); } -/* The following routines are merely placeholders. There is no way - * to inform a user task about suspend or resumes. - */ +/* We don't care about suspend/resume of claimed interfaces */ static int driver_suspend(struct usb_interface *intf, pm_message_t msg) { return 0; @@ -707,12 +717,32 @@ static int driver_resume(struct usb_interface *intf) return 0; } +/* The following routines apply to the entire device, not interfaces */ +void usbfs_notify_suspend(struct usb_device *udev) +{ + /* We don't need to handle this */ +} + +void usbfs_notify_resume(struct usb_device *udev) +{ + struct usb_dev_state *ps; + + /* Protect against simultaneous remove or release */ + mutex_lock(&usbfs_mutex); + list_for_each_entry(ps, &udev->filelist, list) { + WRITE_ONCE(ps->not_yet_resumed, 0); + wake_up_all(&ps->wait_for_resume); + } + mutex_unlock(&usbfs_mutex); +} + struct usb_driver usbfs_driver = { .name = "usbfs", .probe = driver_probe, .disconnect = driver_disconnect, .suspend = driver_suspend, .resume = driver_resume, + .supports_autosuspend = 1, }; static int claimintf(struct usb_dev_state *ps, unsigned int ifnum) @@ -942,17 +972,11 @@ error: return ret; } -static int match_devt(struct device *dev, const void *data) -{ - return dev->devt == (dev_t)(unsigned long)(void *)data; -} - static struct usb_device *usbdev_lookup_by_devt(dev_t devt) { struct device *dev; - dev = bus_find_device(&usb_bus_type, NULL, - (void *) (unsigned long) devt, match_devt); + dev = bus_find_device_by_devt(&usb_bus_type, devt); if (!dev) return NULL; return to_usb_device(dev); @@ -997,9 +1021,12 @@ static int usbdev_open(struct inode *inode, struct file *file) INIT_LIST_HEAD(&ps->async_completed); INIT_LIST_HEAD(&ps->memory_list); init_waitqueue_head(&ps->wait); + init_waitqueue_head(&ps->wait_for_resume); ps->disc_pid = get_pid(task_pid(current)); ps->cred = get_current_cred(); smp_wmb(); + + /* Can't race with resume; the device is already active */ list_add_tail(&ps->list, &dev->filelist); file->private_data = ps; usb_unlock_device(dev); @@ -1025,7 +1052,10 @@ static int usbdev_release(struct inode *inode, struct file *file) usb_lock_device(dev); usb_hub_release_all_ports(dev, ps); + /* Protect against simultaneous resume */ + mutex_lock(&usbfs_mutex); list_del_init(&ps->list); + mutex_unlock(&usbfs_mutex); for (ifnum = 0; ps->ifclaimed && ifnum < 8*sizeof(ps->ifclaimed); ifnum++) { @@ -1033,7 +1063,8 @@ static int usbdev_release(struct inode *inode, struct file *file) releaseintf(ps, ifnum); } destroy_all_async(ps); - usb_autosuspend_device(dev); + if (!ps->suspend_allowed) + usb_autosuspend_device(dev); usb_unlock_device(dev); usb_put_dev(dev); put_pid(ps->disc_pid); @@ -1627,7 +1658,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb if (as->usbm) num_sgs = 0; - u += sizeof(struct async) + sizeof(struct urb) + uurb->buffer_length + + u += sizeof(struct async) + sizeof(struct urb) + + (as->usbm ? 0 : uurb->buffer_length) + num_sgs * sizeof(struct scatterlist); ret = usbfs_increase_memory_usage(u); if (ret) @@ -2279,7 +2311,8 @@ static int proc_get_capabilities(struct usb_dev_state *ps, void __user *arg) caps = USBDEVFS_CAP_ZERO_PACKET | USBDEVFS_CAP_NO_PACKET_SIZE_LIM | USBDEVFS_CAP_REAP_AFTER_DISCONNECT | USBDEVFS_CAP_MMAP | - USBDEVFS_CAP_DROP_PRIVILEGES | USBDEVFS_CAP_CONNINFO_EX; + USBDEVFS_CAP_DROP_PRIVILEGES | + USBDEVFS_CAP_CONNINFO_EX | MAYBE_CAP_SUSPEND; if (!ps->dev->bus->no_stop_on_short) caps |= USBDEVFS_CAP_BULK_CONTINUATION; if (ps->dev->bus->sg_tablesize) @@ -2382,6 +2415,47 @@ static int proc_drop_privileges(struct usb_dev_state *ps, void __user *arg) return 0; } +static int proc_forbid_suspend(struct usb_dev_state *ps) +{ + int ret = 0; + + if (ps->suspend_allowed) { + ret = usb_autoresume_device(ps->dev); + if (ret == 0) + ps->suspend_allowed = false; + else if (ret != -ENODEV) + ret = -EIO; + } + return ret; +} + +static int proc_allow_suspend(struct usb_dev_state *ps) +{ + if (!connected(ps)) + return -ENODEV; + + WRITE_ONCE(ps->not_yet_resumed, 1); + if (!ps->suspend_allowed) { + usb_autosuspend_device(ps->dev); + ps->suspend_allowed = true; + } + return 0; +} + +static int proc_wait_for_resume(struct usb_dev_state *ps) +{ + int ret; + + usb_unlock_device(ps->dev); + ret = wait_event_interruptible(ps->wait_for_resume, + READ_ONCE(ps->not_yet_resumed) == 0); + usb_lock_device(ps->dev); + + if (ret != 0) + return -EINTR; + return proc_forbid_suspend(ps); +} + /* * NOTE: All requests here that have interface numbers as parameters * are assuming that somehow the configuration has been prevented from @@ -2576,6 +2650,15 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, case USBDEVFS_GET_SPEED: ret = ps->dev->speed; break; + case USBDEVFS_FORBID_SUSPEND: + ret = proc_forbid_suspend(ps); + break; + case USBDEVFS_ALLOW_SUSPEND: + ret = proc_allow_suspend(ps); + break; + case USBDEVFS_WAIT_FOR_RESUME: + ret = proc_wait_for_resume(ps); + break; } /* Handle variable-length commands */ @@ -2649,15 +2732,20 @@ static void usbdev_remove(struct usb_device *udev) { struct usb_dev_state *ps; + /* Protect against simultaneous resume */ + mutex_lock(&usbfs_mutex); while (!list_empty(&udev->filelist)) { ps = list_entry(udev->filelist.next, struct usb_dev_state, list); destroy_all_async(ps); wake_up_all(&ps->wait); + WRITE_ONCE(ps->not_yet_resumed, 0); + wake_up_all(&ps->wait_for_resume); list_del_init(&ps->list); if (ps->discsignr) kill_pid_usb_asyncio(ps->discsignr, EPIPE, ps->disccontext, ps->disc_pid, ps->cred); } + mutex_unlock(&usbfs_mutex); } static int usbdev_notify(struct notifier_block *self, diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index ebcadaad89d1..2b27d232d7a7 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -892,6 +892,7 @@ int usb_register_device_driver(struct usb_device_driver *new_udriver, new_udriver->drvwrap.driver.probe = usb_probe_device; new_udriver->drvwrap.driver.remove = usb_unbind_device; new_udriver->drvwrap.driver.owner = owner; + new_udriver->drvwrap.driver.dev_groups = new_udriver->dev_groups; retval = driver_register(&new_udriver->drvwrap.driver); @@ -954,6 +955,7 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner, new_driver->drvwrap.driver.remove = usb_unbind_interface; new_driver->drvwrap.driver.owner = owner; new_driver->drvwrap.driver.mod_name = mod_name; + new_driver->drvwrap.driver.dev_groups = new_driver->dev_groups; spin_lock_init(&new_driver->dynids.lock); INIT_LIST_HEAD(&new_driver->dynids.list); diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 1ac9c1e5f773..38f8b3e31762 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -257,6 +257,8 @@ static int generic_suspend(struct usb_device *udev, pm_message_t msg) else rc = usb_port_suspend(udev, msg); + if (rc == 0) + usbfs_notify_suspend(udev); return rc; } @@ -273,6 +275,9 @@ static int generic_resume(struct usb_device *udev, pm_message_t msg) rc = hcd_bus_resume(udev, msg); else rc = usb_port_resume(udev, msg); + + if (rc == 0) + usbfs_notify_resume(udev); return rc; } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 03432467b05f..9e26b0143a59 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -216,17 +216,18 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* EHCI, OHCI */ hcd->rsrc_start = pci_resource_start(dev, 0); hcd->rsrc_len = pci_resource_len(dev, 0); - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { + if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start, + hcd->rsrc_len, driver->description)) { dev_dbg(&dev->dev, "controller already in use\n"); retval = -EBUSY; goto put_hcd; } - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = devm_ioremap_nocache(&dev->dev, hcd->rsrc_start, + hcd->rsrc_len); if (hcd->regs == NULL) { dev_dbg(&dev->dev, "error mapping memory\n"); retval = -EFAULT; - goto release_mem_region; + goto put_hcd; } } else { @@ -240,8 +241,8 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) hcd->rsrc_start = pci_resource_start(dev, region); hcd->rsrc_len = pci_resource_len(dev, region); - if (request_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) + if (devm_request_region(&dev->dev, hcd->rsrc_start, + hcd->rsrc_len, driver->description)) break; } if (region == PCI_ROM_RESOURCE) { @@ -275,20 +276,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } if (retval != 0) - goto unmap_registers; + goto put_hcd; device_wakeup_enable(hcd->self.controller); if (pci_dev_run_wake(dev)) pm_runtime_put_noidle(&dev->dev); return retval; -unmap_registers: - if (driver->flags & HCD_MEMORY) { - iounmap(hcd->regs); -release_mem_region: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - } else - release_region(hcd->rsrc_start, hcd->rsrc_len); put_hcd: usb_put_hcd(hcd); disable_pci: @@ -347,14 +341,6 @@ void usb_hcd_pci_remove(struct pci_dev *dev) dev_set_drvdata(&dev->dev, NULL); up_read(&companions_rwsem); } - - if (hcd->driver->flags & HCD_MEMORY) { - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - } else { - release_region(hcd->rsrc_start, hcd->rsrc_len); - } - usb_put_hcd(hcd); pci_disable_device(dev); } @@ -407,8 +393,7 @@ static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable) static int check_root_hub_suspended(struct device *dev) { - struct pci_dev *pci_dev = to_pci_dev(dev); - struct usb_hcd *hcd = pci_get_drvdata(pci_dev); + struct usb_hcd *hcd = dev_get_drvdata(dev); if (HCD_RH_RUNNING(hcd)) { dev_warn(dev, "Root hub is not suspended\n"); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 8592c0344fe8..f225eaa98ff8 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1249,9 +1249,6 @@ EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep); * To support host controllers with limited dma capabilities we provide dma * bounce buffers. This feature can be enabled by initializing * hcd->localmem_pool using usb_hcd_setup_local_mem(). - * For this to work properly the host controller code must first use the - * function dma_declare_coherent_memory() to point out which memory area - * that should be used for dma allocations. * * The initialized hcd->localmem_pool then tells the usb code to allocate all * data for dma using the genalloc API. @@ -2191,6 +2188,9 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) hcd->state = HC_STATE_RESUMING; status = hcd->driver->bus_resume(hcd); clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); + if (status == 0) + status = usb_phy_roothub_calibrate(hcd->phy_roothub); + if (status == 0) { struct usb_device *udev; int port1; @@ -2454,7 +2454,6 @@ struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, hcd->self.controller = dev; hcd->self.sysdev = sysdev; hcd->self.bus_name = bus_name; - hcd->self.uses_dma = (sysdev->dma_mask != NULL); timer_setup(&hcd->rh_timer, rh_timer_func, 0); #ifdef CONFIG_PM @@ -2764,6 +2763,10 @@ int usb_add_hcd(struct usb_hcd *hcd, } hcd->rh_pollable = 1; + retval = usb_phy_roothub_calibrate(hcd->phy_roothub); + if (retval) + goto err_hcd_driver_setup; + /* NOTE: root hub and controller capabilities may not be the same */ if (device_can_wakeup(hcd->self.controller) && device_can_wakeup(&hcd->self.root_hub->dev)) diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c index 7580493b867a..fb1588e7c282 100644 --- a/drivers/usb/core/phy.c +++ b/drivers/usb/core/phy.c @@ -151,6 +151,27 @@ err_out: } EXPORT_SYMBOL_GPL(usb_phy_roothub_set_mode); +int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_calibrate(roothub_entry->phy); + if (err) + return err; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate); + int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub) { struct usb_phy_roothub *roothub_entry; diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h index dad564e2d2d4..20a267cd986b 100644 --- a/drivers/usb/core/phy.h +++ b/drivers/usb/core/phy.h @@ -18,6 +18,7 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub, enum phy_mode mode); +int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub); void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub); diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 1a06a4b5fbb1..bbbb35fa639f 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -285,6 +285,14 @@ static int usb_port_runtime_suspend(struct device *dev) } #endif +static void usb_port_shutdown(struct device *dev) +{ + struct usb_port *port_dev = to_usb_port(dev); + + if (port_dev->child) + usb_disable_usb2_hardware_lpm(port_dev->child); +} + static const struct dev_pm_ops usb_port_pm_ops = { #ifdef CONFIG_PM .runtime_suspend = usb_port_runtime_suspend, @@ -301,6 +309,7 @@ struct device_type usb_port_device_type = { static struct device_driver usb_port_driver = { .name = "usb", .owner = THIS_MODULE, + .shutdown = usb_port_shutdown, }; static int link_peers(struct usb_port *left, struct usb_port *right) diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 0ab8738047da..f16c26dc079d 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -933,228 +933,6 @@ void usb_free_coherent(struct usb_device *dev, size_t size, void *addr, } EXPORT_SYMBOL_GPL(usb_free_coherent); -/** - * usb_buffer_map - create DMA mapping(s) for an urb - * @urb: urb whose transfer_buffer/setup_packet will be mapped - * - * URB_NO_TRANSFER_DMA_MAP is added to urb->transfer_flags if the operation - * succeeds. If the device is connected to this system through a non-DMA - * controller, this operation always succeeds. - * - * This call would normally be used for an urb which is reused, perhaps - * as the target of a large periodic transfer, with usb_buffer_dmasync() - * calls to synchronize memory and dma state. - * - * Reverse the effect of this call with usb_buffer_unmap(). - * - * Return: Either %NULL (indicating no buffer could be mapped), or @urb. - * - */ -#if 0 -struct urb *usb_buffer_map(struct urb *urb) -{ - struct usb_bus *bus; - struct device *controller; - - if (!urb - || !urb->dev - || !(bus = urb->dev->bus) - || !(controller = bus->sysdev)) - return NULL; - - if (controller->dma_mask) { - urb->transfer_dma = dma_map_single(controller, - urb->transfer_buffer, urb->transfer_buffer_length, - usb_pipein(urb->pipe) - ? DMA_FROM_DEVICE : DMA_TO_DEVICE); - /* FIXME generic api broken like pci, can't report errors */ - /* if (urb->transfer_dma == DMA_ADDR_INVALID) return 0; */ - } else - urb->transfer_dma = ~0; - urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - return urb; -} -EXPORT_SYMBOL_GPL(usb_buffer_map); -#endif /* 0 */ - -/* XXX DISABLED, no users currently. If you wish to re-enable this - * XXX please determine whether the sync is to transfer ownership of - * XXX the buffer from device to cpu or vice verse, and thusly use the - * XXX appropriate _for_{cpu,device}() method. -DaveM - */ -#if 0 - -/** - * usb_buffer_dmasync - synchronize DMA and CPU view of buffer(s) - * @urb: urb whose transfer_buffer/setup_packet will be synchronized - */ -void usb_buffer_dmasync(struct urb *urb) -{ - struct usb_bus *bus; - struct device *controller; - - if (!urb - || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) - || !urb->dev - || !(bus = urb->dev->bus) - || !(controller = bus->sysdev)) - return; - - if (controller->dma_mask) { - dma_sync_single_for_cpu(controller, - urb->transfer_dma, urb->transfer_buffer_length, - usb_pipein(urb->pipe) - ? DMA_FROM_DEVICE : DMA_TO_DEVICE); - if (usb_pipecontrol(urb->pipe)) - dma_sync_single_for_cpu(controller, - urb->setup_dma, - sizeof(struct usb_ctrlrequest), - DMA_TO_DEVICE); - } -} -EXPORT_SYMBOL_GPL(usb_buffer_dmasync); -#endif - -/** - * usb_buffer_unmap - free DMA mapping(s) for an urb - * @urb: urb whose transfer_buffer will be unmapped - * - * Reverses the effect of usb_buffer_map(). - */ -#if 0 -void usb_buffer_unmap(struct urb *urb) -{ - struct usb_bus *bus; - struct device *controller; - - if (!urb - || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) - || !urb->dev - || !(bus = urb->dev->bus) - || !(controller = bus->sysdev)) - return; - - if (controller->dma_mask) { - dma_unmap_single(controller, - urb->transfer_dma, urb->transfer_buffer_length, - usb_pipein(urb->pipe) - ? DMA_FROM_DEVICE : DMA_TO_DEVICE); - } - urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP; -} -EXPORT_SYMBOL_GPL(usb_buffer_unmap); -#endif /* 0 */ - -#if 0 -/** - * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint - * @dev: device to which the scatterlist will be mapped - * @is_in: mapping transfer direction - * @sg: the scatterlist to map - * @nents: the number of entries in the scatterlist - * - * Return: Either < 0 (indicating no buffers could be mapped), or the - * number of DMA mapping array entries in the scatterlist. - * - * Note: - * The caller is responsible for placing the resulting DMA addresses from - * the scatterlist into URB transfer buffer pointers, and for setting the - * URB_NO_TRANSFER_DMA_MAP transfer flag in each of those URBs. - * - * Top I/O rates come from queuing URBs, instead of waiting for each one - * to complete before starting the next I/O. This is particularly easy - * to do with scatterlists. Just allocate and submit one URB for each DMA - * mapping entry returned, stopping on the first error or when all succeed. - * Better yet, use the usb_sg_*() calls, which do that (and more) for you. - * - * This call would normally be used when translating scatterlist requests, - * rather than usb_buffer_map(), since on some hardware (with IOMMUs) it - * may be able to coalesce mappings for improved I/O efficiency. - * - * Reverse the effect of this call with usb_buffer_unmap_sg(). - */ -int usb_buffer_map_sg(const struct usb_device *dev, int is_in, - struct scatterlist *sg, int nents) -{ - struct usb_bus *bus; - struct device *controller; - - if (!dev - || !(bus = dev->bus) - || !(controller = bus->sysdev) - || !controller->dma_mask) - return -EINVAL; - - /* FIXME generic api broken like pci, can't report errors */ - return dma_map_sg(controller, sg, nents, - is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE) ? : -ENOMEM; -} -EXPORT_SYMBOL_GPL(usb_buffer_map_sg); -#endif - -/* XXX DISABLED, no users currently. If you wish to re-enable this - * XXX please determine whether the sync is to transfer ownership of - * XXX the buffer from device to cpu or vice verse, and thusly use the - * XXX appropriate _for_{cpu,device}() method. -DaveM - */ -#if 0 - -/** - * usb_buffer_dmasync_sg - synchronize DMA and CPU view of scatterlist buffer(s) - * @dev: device to which the scatterlist will be mapped - * @is_in: mapping transfer direction - * @sg: the scatterlist to synchronize - * @n_hw_ents: the positive return value from usb_buffer_map_sg - * - * Use this when you are re-using a scatterlist's data buffers for - * another USB request. - */ -void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in, - struct scatterlist *sg, int n_hw_ents) -{ - struct usb_bus *bus; - struct device *controller; - - if (!dev - || !(bus = dev->bus) - || !(controller = bus->sysdev) - || !controller->dma_mask) - return; - - dma_sync_sg_for_cpu(controller, sg, n_hw_ents, - is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE); -} -EXPORT_SYMBOL_GPL(usb_buffer_dmasync_sg); -#endif - -#if 0 -/** - * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist - * @dev: device to which the scatterlist will be mapped - * @is_in: mapping transfer direction - * @sg: the scatterlist to unmap - * @n_hw_ents: the positive return value from usb_buffer_map_sg - * - * Reverses the effect of usb_buffer_map_sg(). - */ -void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in, - struct scatterlist *sg, int n_hw_ents) -{ - struct usb_bus *bus; - struct device *controller; - - if (!dev - || !(bus = dev->bus) - || !(controller = bus->sysdev) - || !controller->dma_mask) - return; - - dma_unmap_sg(controller, sg, n_hw_ents, - is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE); -} -EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg); -#endif - /* * Notifications of device and interface registration */ diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 0c9fde5ad052..cf4783cf661a 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -95,6 +95,9 @@ extern int usb_runtime_idle(struct device *dev); extern int usb_enable_usb2_hardware_lpm(struct usb_device *udev); extern int usb_disable_usb2_hardware_lpm(struct usb_device *udev); +extern void usbfs_notify_suspend(struct usb_device *udev); +extern void usbfs_notify_resume(struct usb_device *udev); + #else static inline int usb_port_suspend(struct usb_device *udev, pm_message_t msg) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index bff48a8a1984..6be10e496e10 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3224,14 +3224,15 @@ static void kill_all_requests(struct dwc2_hsotg *hsotg, struct dwc2_hsotg_ep *ep, int result) { - struct dwc2_hsotg_req *req, *treq; unsigned int size; ep->req = NULL; - list_for_each_entry_safe(req, treq, &ep->queue, queue) - dwc2_hsotg_complete_request(hsotg, ep, req, - result); + while (!list_empty(&ep->queue)) { + struct dwc2_hsotg_req *req = get_ep_head(ep); + + dwc2_hsotg_complete_request(hsotg, ep, req, result); + } if (!hsotg->dedicated_fifos) return; diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 111787a137ee..81afe553aa66 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -5062,13 +5062,13 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg) dwc2_hc_driver.reset_device = dwc2_reset_device; } + if (hsotg->params.host_dma) + dwc2_hc_driver.flags |= HCD_DMA; + hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev)); if (!hcd) goto error1; - if (!hsotg->params.host_dma) - hcd->self.uses_dma = 0; - hcd->has_tt = 1; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 55f841a54015..31e090ac9f1e 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -404,10 +404,7 @@ static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg) device_property_read_u32(hsotg->dev, "g-np-tx-fifo-size", &p->g_np_tx_fifo_size); - num = device_property_read_u32_array(hsotg->dev, - "g-tx-fifo-size", - NULL, 0); - + num = device_property_count_u32(hsotg->dev, "g-tx-fifo-size"); if (num > 0) { num = min(num, 15); memset(p->g_tx_fifo_size, 0, diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 80fd3c6dcd1c..3c6ce09a6db5 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -407,10 +407,8 @@ static int dwc2_driver_probe(struct platform_device *dev) spin_lock_init(&hsotg->lock); hsotg->irq = platform_get_irq(dev, 0); - if (hsotg->irq < 0) { - dev_err(&dev->dev, "missing IRQ resource\n"); + if (hsotg->irq < 0) return hsotg->irq; - } dev_dbg(hsotg->dev, "registering common handler for irq%d\n", hsotg->irq); diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index c9bb93a2c81e..999ce5e84d3c 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -168,7 +168,6 @@ static void __dwc3_set_mode(struct work_struct *work) otg_set_vbus(dwc->usb2_phy->otg, true); phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); - phy_calibrate(dwc->usb2_generic_phy); } break; case DWC3_GCTL_PRTCAP_DEVICE: @@ -252,12 +251,25 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) reg |= DWC3_DCTL_CSFTRST; dwc3_writel(dwc->regs, DWC3_DCTL, reg); + /* + * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit + * is cleared only after all the clocks are synchronized. This can + * take a little more than 50ms. Set the polling rate at 20ms + * for 10 times instead. + */ + if (dwc3_is_usb31(dwc) && dwc->revision >= DWC3_USB31_REVISION_190A) + retries = 10; + do { reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (!(reg & DWC3_DCTL_CSFTRST)) goto done; - udelay(1); + if (dwc3_is_usb31(dwc) && + dwc->revision >= DWC3_USB31_REVISION_190A) + msleep(20); + else + udelay(1); } while (--retries); phy_exit(dwc->usb3_generic_phy); @@ -267,11 +279,11 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) done: /* - * For DWC_usb31 controller, once DWC3_DCTL_CSFTRST bit is cleared, - * we must wait at least 50ms before accessing the PHY domain - * (synchronization delay). DWC_usb31 programming guide section 1.3.2. + * For DWC_usb31 controller 1.80a and prior, once DCTL.CSFRST bit + * is cleared, we must wait at least 50ms before accessing the PHY + * domain (synchronization delay). */ - if (dwc3_is_usb31(dwc)) + if (dwc3_is_usb31(dwc) && dwc->revision <= DWC3_USB31_REVISION_180A) msleep(50); return 0; @@ -686,8 +698,7 @@ static void dwc3_core_exit(struct dwc3 *dwc) usb_phy_set_suspend(dwc->usb3_phy, 1); phy_power_off(dwc->usb2_generic_phy); phy_power_off(dwc->usb3_generic_phy); - clk_bulk_disable(dwc->num_clks, dwc->clks); - clk_bulk_unprepare(dwc->num_clks, dwc->clks); + clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks); reset_control_assert(dwc->reset); } @@ -813,8 +824,7 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc) * result = 1, means INCRx burst mode supported. * result > 1, means undefined length burst mode supported. */ - ntype = device_property_read_u32_array(dev, - "snps,incr-burst-type-adjustment", NULL, 0); + ntype = device_property_count_u32(dev, "snps,incr-burst-type-adjustment"); if (ntype <= 0) return; @@ -1166,7 +1176,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) dev_err(dev, "failed to initialize host\n"); return ret; } - phy_calibrate(dwc->usb2_generic_phy); break; case USB_DR_MODE_OTG: INIT_WORK(&dwc->drd_work, __dwc3_set_mode); @@ -1310,8 +1319,7 @@ static void dwc3_get_properties(struct dwc3 *dwc) dwc->lpm_nyet_threshold = lpm_nyet_threshold; dwc->tx_de_emphasis = tx_de_emphasis; - dwc->hird_threshold = hird_threshold - | (dwc->is_utmi_l1_suspend << 4); + dwc->hird_threshold = hird_threshold; dwc->rx_thr_num_pkt_prd = rx_thr_num_pkt_prd; dwc->rx_max_burst_prd = rx_max_burst_prd; @@ -1436,7 +1444,7 @@ static int dwc3_probe(struct platform_device *pdev) if (dev->of_node) { dwc->num_clks = ARRAY_SIZE(dwc3_core_clks); - ret = clk_bulk_get(dev, dwc->num_clks, dwc->clks); + ret = devm_clk_bulk_get(dev, dwc->num_clks, dwc->clks); if (ret == -EPROBE_DEFER) return ret; /* @@ -1449,16 +1457,12 @@ static int dwc3_probe(struct platform_device *pdev) ret = reset_control_deassert(dwc->reset); if (ret) - goto put_clks; + return ret; - ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + ret = clk_bulk_prepare_enable(dwc->num_clks, dwc->clks); if (ret) goto assert_reset; - ret = clk_bulk_enable(dwc->num_clks, dwc->clks); - if (ret) - goto unprepare_clks; - if (!dwc3_core_is_valid(dwc)) { dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); ret = -ENODEV; @@ -1531,13 +1535,9 @@ err1: pm_runtime_disable(&pdev->dev); disable_clks: - clk_bulk_disable(dwc->num_clks, dwc->clks); -unprepare_clks: - clk_bulk_unprepare(dwc->num_clks, dwc->clks); + clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks); assert_reset: reset_control_assert(dwc->reset); -put_clks: - clk_bulk_put(dwc->num_clks, dwc->clks); return ret; } @@ -1560,7 +1560,6 @@ static int dwc3_remove(struct platform_device *pdev) dwc3_free_event_buffers(dwc); dwc3_free_scratch_buffers(dwc); - clk_bulk_put(dwc->num_clks, dwc->clks); return 0; } @@ -1574,14 +1573,10 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc) if (ret) return ret; - ret = clk_bulk_prepare(dwc->num_clks, dwc->clks); + ret = clk_bulk_prepare_enable(dwc->num_clks, dwc->clks); if (ret) goto assert_reset; - ret = clk_bulk_enable(dwc->num_clks, dwc->clks); - if (ret) - goto unprepare_clks; - ret = dwc3_core_init(dwc); if (ret) goto disable_clks; @@ -1589,9 +1584,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc) return 0; disable_clks: - clk_bulk_disable(dwc->num_clks, dwc->clks); -unprepare_clks: - clk_bulk_unprepare(dwc->num_clks, dwc->clks); + clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks); assert_reset: reset_control_assert(dwc->reset); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 3dd783b889cb..1c8b349379af 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1137,6 +1137,8 @@ struct dwc3 { #define DWC3_USB31_REVISION_120A (0x3132302a | DWC3_REVISION_IS_DWC31) #define DWC3_USB31_REVISION_160A (0x3136302a | DWC3_REVISION_IS_DWC31) #define DWC3_USB31_REVISION_170A (0x3137302a | DWC3_REVISION_IS_DWC31) +#define DWC3_USB31_REVISION_180A (0x3138302a | DWC3_REVISION_IS_DWC31) +#define DWC3_USB31_REVISION_190A (0x3139302a | DWC3_REVISION_IS_DWC31) u32 version_type; diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index 068259fdfb0c..9baabed87d61 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -246,258 +246,6 @@ static inline const char *dwc3_gadget_event_string(char *str, size_t size, return str; } -static inline void dwc3_decode_get_status(__u8 t, __u16 i, __u16 l, char *str, - size_t size) -{ - switch (t & USB_RECIP_MASK) { - case USB_RECIP_DEVICE: - snprintf(str, size, "Get Device Status(Length = %d)", l); - break; - case USB_RECIP_INTERFACE: - snprintf(str, size, "Get Interface Status(Intf = %d, Length = %d)", - i, l); - break; - case USB_RECIP_ENDPOINT: - snprintf(str, size, "Get Endpoint Status(ep%d%s)", - i & ~USB_DIR_IN, - i & USB_DIR_IN ? "in" : "out"); - break; - } -} - -static inline void dwc3_decode_set_clear_feature(__u8 t, __u8 b, __u16 v, - __u16 i, char *str, size_t size) -{ - switch (t & USB_RECIP_MASK) { - case USB_RECIP_DEVICE: - snprintf(str, size, "%s Device Feature(%s%s)", - b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", - ({char *s; - switch (v) { - case USB_DEVICE_SELF_POWERED: - s = "Self Powered"; - break; - case USB_DEVICE_REMOTE_WAKEUP: - s = "Remote Wakeup"; - break; - case USB_DEVICE_TEST_MODE: - s = "Test Mode"; - break; - case USB_DEVICE_U1_ENABLE: - s = "U1 Enable"; - break; - case USB_DEVICE_U2_ENABLE: - s = "U2 Enable"; - break; - case USB_DEVICE_LTM_ENABLE: - s = "LTM Enable"; - break; - default: - s = "UNKNOWN"; - } s; }), - v == USB_DEVICE_TEST_MODE ? - ({ char *s; - switch (i) { - case TEST_J: - s = ": TEST_J"; - break; - case TEST_K: - s = ": TEST_K"; - break; - case TEST_SE0_NAK: - s = ": TEST_SE0_NAK"; - break; - case TEST_PACKET: - s = ": TEST_PACKET"; - break; - case TEST_FORCE_EN: - s = ": TEST_FORCE_EN"; - break; - default: - s = ": UNKNOWN"; - } s; }) : ""); - break; - case USB_RECIP_INTERFACE: - snprintf(str, size, "%s Interface Feature(%s)", - b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", - v == USB_INTRF_FUNC_SUSPEND ? - "Function Suspend" : "UNKNOWN"); - break; - case USB_RECIP_ENDPOINT: - snprintf(str, size, "%s Endpoint Feature(%s ep%d%s)", - b == USB_REQ_CLEAR_FEATURE ? "Clear" : "Set", - v == USB_ENDPOINT_HALT ? "Halt" : "UNKNOWN", - i & ~USB_DIR_IN, - i & USB_DIR_IN ? "in" : "out"); - break; - } -} - -static inline void dwc3_decode_set_address(__u16 v, char *str, size_t size) -{ - snprintf(str, size, "Set Address(Addr = %02x)", v); -} - -static inline void dwc3_decode_get_set_descriptor(__u8 t, __u8 b, __u16 v, - __u16 i, __u16 l, char *str, size_t size) -{ - snprintf(str, size, "%s %s Descriptor(Index = %d, Length = %d)", - b == USB_REQ_GET_DESCRIPTOR ? "Get" : "Set", - ({ char *s; - switch (v >> 8) { - case USB_DT_DEVICE: - s = "Device"; - break; - case USB_DT_CONFIG: - s = "Configuration"; - break; - case USB_DT_STRING: - s = "String"; - break; - case USB_DT_INTERFACE: - s = "Interface"; - break; - case USB_DT_ENDPOINT: - s = "Endpoint"; - break; - case USB_DT_DEVICE_QUALIFIER: - s = "Device Qualifier"; - break; - case USB_DT_OTHER_SPEED_CONFIG: - s = "Other Speed Config"; - break; - case USB_DT_INTERFACE_POWER: - s = "Interface Power"; - break; - case USB_DT_OTG: - s = "OTG"; - break; - case USB_DT_DEBUG: - s = "Debug"; - break; - case USB_DT_INTERFACE_ASSOCIATION: - s = "Interface Association"; - break; - case USB_DT_BOS: - s = "BOS"; - break; - case USB_DT_DEVICE_CAPABILITY: - s = "Device Capability"; - break; - case USB_DT_PIPE_USAGE: - s = "Pipe Usage"; - break; - case USB_DT_SS_ENDPOINT_COMP: - s = "SS Endpoint Companion"; - break; - case USB_DT_SSP_ISOC_ENDPOINT_COMP: - s = "SSP Isochronous Endpoint Companion"; - break; - default: - s = "UNKNOWN"; - break; - } s; }), v & 0xff, l); -} - - -static inline void dwc3_decode_get_configuration(__u16 l, char *str, - size_t size) -{ - snprintf(str, size, "Get Configuration(Length = %d)", l); -} - -static inline void dwc3_decode_set_configuration(__u8 v, char *str, size_t size) -{ - snprintf(str, size, "Set Configuration(Config = %d)", v); -} - -static inline void dwc3_decode_get_intf(__u16 i, __u16 l, char *str, - size_t size) -{ - snprintf(str, size, "Get Interface(Intf = %d, Length = %d)", i, l); -} - -static inline void dwc3_decode_set_intf(__u8 v, __u16 i, char *str, size_t size) -{ - snprintf(str, size, "Set Interface(Intf = %d, Alt.Setting = %d)", i, v); -} - -static inline void dwc3_decode_synch_frame(__u16 i, __u16 l, char *str, - size_t size) -{ - snprintf(str, size, "Synch Frame(Endpoint = %d, Length = %d)", i, l); -} - -static inline void dwc3_decode_set_sel(__u16 l, char *str, size_t size) -{ - snprintf(str, size, "Set SEL(Length = %d)", l); -} - -static inline void dwc3_decode_set_isoch_delay(__u8 v, char *str, size_t size) -{ - snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", v); -} - -/** - * dwc3_decode_ctrl - returns a string represetion of ctrl request - */ -static inline const char *dwc3_decode_ctrl(char *str, size_t size, - __u8 bRequestType, __u8 bRequest, __u16 wValue, __u16 wIndex, - __u16 wLength) -{ - switch (bRequest) { - case USB_REQ_GET_STATUS: - dwc3_decode_get_status(bRequestType, wIndex, wLength, str, - size); - break; - case USB_REQ_CLEAR_FEATURE: - case USB_REQ_SET_FEATURE: - dwc3_decode_set_clear_feature(bRequestType, bRequest, wValue, - wIndex, str, size); - break; - case USB_REQ_SET_ADDRESS: - dwc3_decode_set_address(wValue, str, size); - break; - case USB_REQ_GET_DESCRIPTOR: - case USB_REQ_SET_DESCRIPTOR: - dwc3_decode_get_set_descriptor(bRequestType, bRequest, wValue, - wIndex, wLength, str, size); - break; - case USB_REQ_GET_CONFIGURATION: - dwc3_decode_get_configuration(wLength, str, size); - break; - case USB_REQ_SET_CONFIGURATION: - dwc3_decode_set_configuration(wValue, str, size); - break; - case USB_REQ_GET_INTERFACE: - dwc3_decode_get_intf(wIndex, wLength, str, size); - break; - case USB_REQ_SET_INTERFACE: - dwc3_decode_set_intf(wValue, wIndex, str, size); - break; - case USB_REQ_SYNCH_FRAME: - dwc3_decode_synch_frame(wIndex, wLength, str, size); - break; - case USB_REQ_SET_SEL: - dwc3_decode_set_sel(wLength, str, size); - break; - case USB_REQ_SET_ISOCH_DELAY: - dwc3_decode_set_isoch_delay(wValue, str, size); - break; - default: - snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x", - bRequestType, bRequest, - cpu_to_le16(wValue) & 0xff, - cpu_to_le16(wValue) >> 8, - cpu_to_le16(wIndex) & 0xff, - cpu_to_le16(wIndex) >> 8, - cpu_to_le16(wLength) & 0xff, - cpu_to_le16(wLength) >> 8); - } - - return str; -} - /** * dwc3_ep_event_string - returns event name * @event: then event code diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c index cbee5fb9b9fb..1e14a6f4884b 100644 --- a/drivers/usb/dwc3/dwc3-keystone.c +++ b/drivers/usb/dwc3/dwc3-keystone.c @@ -81,7 +81,6 @@ static int kdwc3_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *node = pdev->dev.of_node; struct dwc3_keystone *kdwc; - struct resource *res; int error, irq; kdwc = devm_kzalloc(dev, sizeof(*kdwc), GFP_KERNEL); @@ -92,8 +91,7 @@ static int kdwc3_probe(struct platform_device *pdev) kdwc->dev = dev; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - kdwc->usbss = devm_ioremap_resource(dev, res); + kdwc->usbss = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(kdwc->usbss)) return PTR_ERR(kdwc->usbss); @@ -112,7 +110,6 @@ static int kdwc3_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { - dev_err(&pdev->dev, "missing irq\n"); error = irq; goto err_irq; } diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index bca7e92a10e9..8a3ec1a951fe 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -386,7 +386,6 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; void __iomem *base; - struct resource *res; enum phy_mode otg_id; int ret, i, irq; @@ -394,8 +393,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); @@ -564,7 +562,13 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev) static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev) { struct dwc3_meson_g12a *priv = dev_get_drvdata(dev); - int i; + int i, ret; + + if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) { + ret = regulator_disable(priv->vbus); + if (ret) + return ret; + } for (i = 0 ; i < PHY_COUNT ; ++i) { phy_power_off(priv->phys[i]); @@ -599,6 +603,12 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev) return ret; } + if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) { + ret = regulator_enable(priv->vbus); + if (ret) + return ret; + } + return 0; } diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index ed8b86517675..8c3de2d258bf 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -14,7 +14,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <linux/platform_data/dwc3-omap.h> #include <linux/pm_runtime.h> #include <linux/dma-mapping.h> #include <linux/ioport.h> @@ -106,6 +105,12 @@ #define USBOTGSS_UTMI_OTG_CTRL_SESSVALID BIT(2) #define USBOTGSS_UTMI_OTG_CTRL_VBUSVALID BIT(1) +enum dwc3_omap_utmi_mode { + DWC3_OMAP_UTMI_MODE_UNKNOWN = 0, + DWC3_OMAP_UTMI_MODE_HW, + DWC3_OMAP_UTMI_MODE_SW, +}; + struct dwc3_omap { struct device *dev; @@ -446,7 +451,6 @@ static int dwc3_omap_probe(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; struct dwc3_omap *omap; - struct resource *res; struct device *dev = &pdev->dev; struct regulator *vbus_reg = NULL; @@ -469,13 +473,10 @@ static int dwc3_omap_probe(struct platform_device *pdev) platform_set_drvdata(pdev, omap); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "missing IRQ resource: %d\n", irq); + if (irq < 0) return irq; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); + base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 16081383c401..c682420f25ca 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -255,24 +255,26 @@ static int st_dwc3_probe(struct platform_device *pdev) if (!child) { dev_err(&pdev->dev, "failed to find dwc3 core node\n"); ret = -ENODEV; - goto undo_softreset; + goto err_node_put; } /* Allocate and initialize the core */ ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { dev_err(dev, "failed to add dwc3 core\n"); - goto undo_softreset; + goto err_node_put; } child_pdev = of_find_device_by_node(child); if (!child_pdev) { dev_err(dev, "failed to find dwc3 core device\n"); ret = -ENODEV; - goto undo_softreset; + goto err_node_put; } dwc3_data->dr_mode = usb_get_dr_mode(&child_pdev->dev); + of_node_put(child); + of_dev_put(child_pdev); /* * Configure the USB port as device or host according to the static @@ -292,6 +294,8 @@ static int st_dwc3_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dwc3_data); return 0; +err_node_put: + of_node_put(child); undo_softreset: reset_control_assert(dwc3_data->rstc_rst); undo_powerdown: diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 173f5329d3d9..8adb59f8e4f1 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2078,6 +2078,26 @@ static void dwc3_gadget_config_params(struct usb_gadget *g, { struct dwc3 *dwc = gadget_to_dwc(g); + params->besl_baseline = USB_DEFAULT_BESL_UNSPECIFIED; + params->besl_deep = USB_DEFAULT_BESL_UNSPECIFIED; + + /* Recommended BESL */ + if (!dwc->dis_enblslpm_quirk) { + /* + * If the recommended BESL baseline is 0 or if the BESL deep is + * less than 2, Microsoft's Windows 10 host usb stack will issue + * a usb reset immediately after it receives the extended BOS + * descriptor and the enumeration will fail. To maintain + * compatibility with the Windows' usb stack, let's set the + * recommended BESL baseline to 1 and clamp the BESL deep to be + * within 2 to 15. + */ + params->besl_baseline = 1; + if (dwc->is_utmi_l1_suspend) + params->besl_deep = + clamp_t(u8, dwc->hird_threshold, 2, 15); + } + /* U1 Device exit Latency */ if (dwc->dis_u1_entry_quirk) params->bU1devExitLat = 0; @@ -2868,7 +2888,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN); - reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold); + reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold | + (dwc->is_utmi_l1_suspend << 4)); /* * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and @@ -3318,7 +3339,6 @@ int dwc3_gadget_init(struct dwc3 *dwc) dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->gadget.sg_supported = true; dwc->gadget.name = "dwc3-gadget"; - dwc->gadget.is_otg = dwc->dr_mode == USB_DR_MODE_OTG; dwc->gadget.lpm_capable = true; /* diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index f55947294f7c..8deea8c91e03 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -85,7 +85,7 @@ int dwc3_host_init(struct dwc3 *dwc) DWC3_XHCI_RESOURCES_NUM); if (ret) { dev_err(dwc->dev, "couldn't add resources to xHCI device\n"); - goto err1; + goto err; } memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props)); @@ -112,37 +112,23 @@ int dwc3_host_init(struct dwc3 *dwc) ret = platform_device_add_properties(xhci, props); if (ret) { dev_err(dwc->dev, "failed to add properties to xHCI\n"); - goto err1; + goto err; } } - phy_create_lookup(dwc->usb2_generic_phy, "usb2-phy", - dev_name(dwc->dev)); - phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy", - dev_name(dwc->dev)); - ret = platform_device_add(xhci); if (ret) { dev_err(dwc->dev, "failed to register xHCI device\n"); - goto err2; + goto err; } return 0; -err2: - phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy", - dev_name(dwc->dev)); - phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy", - dev_name(dwc->dev)); -err1: +err: platform_device_put(xhci); return ret; } void dwc3_host_exit(struct dwc3 *dwc) { - phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy", - dev_name(dwc->dev)); - phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy", - dev_name(dwc->dev)); platform_device_unregister(dwc->xhci); } diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index 818a63da1a44..9edff17111f7 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -86,7 +86,7 @@ DECLARE_EVENT_CLASS(dwc3_log_ctrl, __entry->wIndex = le16_to_cpu(ctrl->wIndex); __entry->wLength = le16_to_cpu(ctrl->wLength); ), - TP_printk("%s", dwc3_decode_ctrl(__get_str(str), DWC3_MSG_MAX, + TP_printk("%s", usb_decode_ctrl(__get_str(str), DWC3_MSG_MAX, __entry->bRequestType, __entry->bRequest, __entry->wValue, __entry->wIndex, __entry->wLength) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 76883ff4f5bb..d516e8d6cd7f 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -612,6 +612,7 @@ static int bos_desc(struct usb_composite_dev *cdev) struct usb_ext_cap_descriptor *usb_ext; struct usb_dcd_config_params dcd_config_params; struct usb_bos_descriptor *bos = cdev->req->buf; + unsigned int besl = 0; bos->bLength = USB_DT_BOS_SIZE; bos->bDescriptorType = USB_DT_BOS; @@ -619,6 +620,29 @@ static int bos_desc(struct usb_composite_dev *cdev) bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE); bos->bNumDeviceCaps = 0; + /* Get Controller configuration */ + if (cdev->gadget->ops->get_config_params) { + cdev->gadget->ops->get_config_params(cdev->gadget, + &dcd_config_params); + } else { + dcd_config_params.besl_baseline = + USB_DEFAULT_BESL_UNSPECIFIED; + dcd_config_params.besl_deep = + USB_DEFAULT_BESL_UNSPECIFIED; + dcd_config_params.bU1devExitLat = + USB_DEFAULT_U1_DEV_EXIT_LAT; + dcd_config_params.bU2DevExitLat = + cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT); + } + + if (dcd_config_params.besl_baseline != USB_DEFAULT_BESL_UNSPECIFIED) + besl = USB_BESL_BASELINE_VALID | + USB_SET_BESL_BASELINE(dcd_config_params.besl_baseline); + + if (dcd_config_params.besl_deep != USB_DEFAULT_BESL_UNSPECIFIED) + besl |= USB_BESL_DEEP_VALID | + USB_SET_BESL_DEEP(dcd_config_params.besl_deep); + /* * A SuperSpeed device shall include the USB2.0 extension descriptor * and shall support LPM when operating in USB2.0 HS mode. @@ -629,7 +653,8 @@ static int bos_desc(struct usb_composite_dev *cdev) usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE; usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY; usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT; - usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT); + usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | + USB_BESL_SUPPORT | besl); /* * The Superspeed USB Capability descriptor shall be implemented by all @@ -650,17 +675,6 @@ static int bos_desc(struct usb_composite_dev *cdev) USB_HIGH_SPEED_OPERATION | USB_5GBPS_OPERATION); ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION; - - /* Get Controller configuration */ - if (cdev->gadget->ops->get_config_params) { - cdev->gadget->ops->get_config_params(cdev->gadget, - &dcd_config_params); - } else { - dcd_config_params.bU1devExitLat = - USB_DEFAULT_U1_DEV_EXIT_LAT; - dcd_config_params.bU2DevExitLat = - cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT); - } ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat; ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat; } diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 213ff03c8a9f..59d9d512dcda 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -17,6 +17,7 @@ #include <linux/blkdev.h> #include <linux/pagemap.h> #include <linux/export.h> +#include <linux/fs_parser.h> #include <linux/hid.h> #include <linux/mm.h> #include <linux/module.h> @@ -1451,9 +1452,9 @@ struct ffs_sb_fill_data { struct ffs_data *ffs_data; }; -static int ffs_sb_fill(struct super_block *sb, void *_data, int silent) +static int ffs_sb_fill(struct super_block *sb, struct fs_context *fc) { - struct ffs_sb_fill_data *data = _data; + struct ffs_sb_fill_data *data = fc->fs_private; struct inode *inode; struct ffs_data *ffs = data->ffs_data; @@ -1486,147 +1487,152 @@ static int ffs_sb_fill(struct super_block *sb, void *_data, int silent) return 0; } -static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts) -{ - ENTER(); +enum { + Opt_no_disconnect, + Opt_rmode, + Opt_fmode, + Opt_mode, + Opt_uid, + Opt_gid, +}; - if (!opts || !*opts) - return 0; +static const struct fs_parameter_spec ffs_fs_param_specs[] = { + fsparam_bool ("no_disconnect", Opt_no_disconnect), + fsparam_u32 ("rmode", Opt_rmode), + fsparam_u32 ("fmode", Opt_fmode), + fsparam_u32 ("mode", Opt_mode), + fsparam_u32 ("uid", Opt_uid), + fsparam_u32 ("gid", Opt_gid), + {} +}; - for (;;) { - unsigned long value; - char *eq, *comma; - - /* Option limit */ - comma = strchr(opts, ','); - if (comma) - *comma = 0; - - /* Value limit */ - eq = strchr(opts, '='); - if (unlikely(!eq)) { - pr_err("'=' missing in %s\n", opts); - return -EINVAL; - } - *eq = 0; +static const struct fs_parameter_description ffs_fs_fs_parameters = { + .name = "kAFS", + .specs = ffs_fs_param_specs, +}; - /* Parse value */ - if (kstrtoul(eq + 1, 0, &value)) { - pr_err("%s: invalid value: %s\n", opts, eq + 1); - return -EINVAL; - } +static int ffs_fs_parse_param(struct fs_context *fc, struct fs_parameter *param) +{ + struct ffs_sb_fill_data *data = fc->fs_private; + struct fs_parse_result result; + int opt; - /* Interpret option */ - switch (eq - opts) { - case 13: - if (!memcmp(opts, "no_disconnect", 13)) - data->no_disconnect = !!value; - else - goto invalid; - break; - case 5: - if (!memcmp(opts, "rmode", 5)) - data->root_mode = (value & 0555) | S_IFDIR; - else if (!memcmp(opts, "fmode", 5)) - data->perms.mode = (value & 0666) | S_IFREG; - else - goto invalid; - break; + ENTER(); - case 4: - if (!memcmp(opts, "mode", 4)) { - data->root_mode = (value & 0555) | S_IFDIR; - data->perms.mode = (value & 0666) | S_IFREG; - } else { - goto invalid; - } - break; + opt = fs_parse(fc, &ffs_fs_fs_parameters, param, &result); + if (opt < 0) + return opt; - case 3: - if (!memcmp(opts, "uid", 3)) { - data->perms.uid = make_kuid(current_user_ns(), value); - if (!uid_valid(data->perms.uid)) { - pr_err("%s: unmapped value: %lu\n", opts, value); - return -EINVAL; - } - } else if (!memcmp(opts, "gid", 3)) { - data->perms.gid = make_kgid(current_user_ns(), value); - if (!gid_valid(data->perms.gid)) { - pr_err("%s: unmapped value: %lu\n", opts, value); - return -EINVAL; - } - } else { - goto invalid; - } - break; + switch (opt) { + case Opt_no_disconnect: + data->no_disconnect = result.boolean; + break; + case Opt_rmode: + data->root_mode = (result.uint_32 & 0555) | S_IFDIR; + break; + case Opt_fmode: + data->perms.mode = (result.uint_32 & 0666) | S_IFREG; + break; + case Opt_mode: + data->root_mode = (result.uint_32 & 0555) | S_IFDIR; + data->perms.mode = (result.uint_32 & 0666) | S_IFREG; + break; - default: -invalid: - pr_err("%s: invalid option\n", opts); - return -EINVAL; - } + case Opt_uid: + data->perms.uid = make_kuid(current_user_ns(), result.uint_32); + if (!uid_valid(data->perms.uid)) + goto unmapped_value; + break; + case Opt_gid: + data->perms.gid = make_kgid(current_user_ns(), result.uint_32); + if (!gid_valid(data->perms.gid)) + goto unmapped_value; + break; - /* Next iteration */ - if (!comma) - break; - opts = comma + 1; + default: + return -ENOPARAM; } return 0; -} -/* "mount -t functionfs dev_name /dev/function" ends up here */ +unmapped_value: + return invalf(fc, "%s: unmapped value: %u", param->key, result.uint_32); +} -static struct dentry * -ffs_fs_mount(struct file_system_type *t, int flags, - const char *dev_name, void *opts) -{ - struct ffs_sb_fill_data data = { - .perms = { - .mode = S_IFREG | 0600, - .uid = GLOBAL_ROOT_UID, - .gid = GLOBAL_ROOT_GID, - }, - .root_mode = S_IFDIR | 0500, - .no_disconnect = false, - }; - struct dentry *rv; - int ret; +/* + * Set up the superblock for a mount. + */ +static int ffs_fs_get_tree(struct fs_context *fc) +{ + struct ffs_sb_fill_data *ctx = fc->fs_private; void *ffs_dev; struct ffs_data *ffs; ENTER(); - ret = ffs_fs_parse_opts(&data, opts); - if (unlikely(ret < 0)) - return ERR_PTR(ret); + if (!fc->source) + return invalf(fc, "No source specified"); - ffs = ffs_data_new(dev_name); + ffs = ffs_data_new(fc->source); if (unlikely(!ffs)) - return ERR_PTR(-ENOMEM); - ffs->file_perms = data.perms; - ffs->no_disconnect = data.no_disconnect; + return -ENOMEM; + ffs->file_perms = ctx->perms; + ffs->no_disconnect = ctx->no_disconnect; - ffs->dev_name = kstrdup(dev_name, GFP_KERNEL); + ffs->dev_name = kstrdup(fc->source, GFP_KERNEL); if (unlikely(!ffs->dev_name)) { ffs_data_put(ffs); - return ERR_PTR(-ENOMEM); + return -ENOMEM; } - ffs_dev = ffs_acquire_dev(dev_name); + ffs_dev = ffs_acquire_dev(ffs->dev_name); if (IS_ERR(ffs_dev)) { ffs_data_put(ffs); - return ERR_CAST(ffs_dev); + return PTR_ERR(ffs_dev); } + ffs->private_data = ffs_dev; - data.ffs_data = ffs; + ctx->ffs_data = ffs; + return get_tree_nodev(fc, ffs_sb_fill); +} + +static void ffs_fs_free_fc(struct fs_context *fc) +{ + struct ffs_sb_fill_data *ctx = fc->fs_private; + + if (ctx) { + if (ctx->ffs_data) { + ffs_release_dev(ctx->ffs_data); + ffs_data_put(ctx->ffs_data); + } - rv = mount_nodev(t, flags, &data, ffs_sb_fill); - if (IS_ERR(rv) && data.ffs_data) { - ffs_release_dev(data.ffs_data); - ffs_data_put(data.ffs_data); + kfree(ctx); } - return rv; +} + +static const struct fs_context_operations ffs_fs_context_ops = { + .free = ffs_fs_free_fc, + .parse_param = ffs_fs_parse_param, + .get_tree = ffs_fs_get_tree, +}; + +static int ffs_fs_init_fs_context(struct fs_context *fc) +{ + struct ffs_sb_fill_data *ctx; + + ctx = kzalloc(sizeof(struct ffs_sb_fill_data), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->perms.mode = S_IFREG | 0600; + ctx->perms.uid = GLOBAL_ROOT_UID; + ctx->perms.gid = GLOBAL_ROOT_GID; + ctx->root_mode = S_IFDIR | 0500; + ctx->no_disconnect = false; + + fc->fs_private = ctx; + fc->ops = &ffs_fs_context_ops; + return 0; } static void @@ -1644,7 +1650,8 @@ ffs_fs_kill_sb(struct super_block *sb) static struct file_system_type ffs_fs_type = { .owner = THIS_MODULE, .name = "functionfs", - .mount = ffs_fs_mount, + .init_fs_context = ffs_fs_init_fs_context, + .parameters = &ffs_fs_fs_parameters, .kill_sb = ffs_fs_kill_sb, }; MODULE_ALIAS_FS("functionfs"); diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index ef0259a950ba..d7e611645533 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -45,7 +45,8 @@ config USB_AT91 config USB_LPC32XX tristate "LPC32XX USB Peripheral Controller" - depends on ARCH_LPC32XX && I2C + depends on ARCH_LPC32XX + depends on I2C select USB_ISP1301 help This option selects the USB device controller in the LPC32xx SoC. diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c index db3628be38c0..90b134d5dca9 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c @@ -65,14 +65,16 @@ void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req, void ast_vhub_nuke(struct ast_vhub_ep *ep, int status) { struct ast_vhub_req *req; - - EPDBG(ep, "Nuking\n"); + int count = 0; /* Beware, lock will be dropped & req-acquired by done() */ while (!list_empty(&ep->queue)) { req = list_first_entry(&ep->queue, struct ast_vhub_req, queue); ast_vhub_done(ep, req, status); + count++; } + if (count) + EPDBG(ep, "Nuked %d request(s)\n", count); } struct usb_request *ast_vhub_alloc_request(struct usb_ep *u_ep, @@ -348,7 +350,6 @@ static int ast_vhub_probe(struct platform_device *pdev) /* Find interrupt and install handler */ vhub->irq = platform_get_irq(pdev, 0); if (vhub->irq < 0) { - dev_err(&pdev->dev, "Failed to get interrupt\n"); rc = vhub->irq; goto err; } diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c b/drivers/usb/gadget/udc/aspeed-vhub/dev.c index 6b1b16b17d7d..4008e7a51188 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/dev.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c @@ -50,11 +50,14 @@ void ast_vhub_dev_irq(struct ast_vhub_dev *d) static void ast_vhub_dev_enable(struct ast_vhub_dev *d) { - u32 reg, hmsk; + u32 reg, hmsk, i; if (d->enabled) return; + /* Cleanup EP0 state */ + ast_vhub_reset_ep0(d); + /* Enable device and its EP0 interrupts */ reg = VHUB_DEV_EN_ENABLE_PORT | VHUB_DEV_EN_EP0_IN_ACK_IRQEN | @@ -73,6 +76,19 @@ static void ast_vhub_dev_enable(struct ast_vhub_dev *d) /* Set EP0 DMA buffer address */ writel(d->ep0.buf_dma, d->regs + AST_VHUB_DEV_EP0_DATA); + /* Clear stall on all EPs */ + for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) { + struct ast_vhub_ep *ep = d->epns[i]; + + if (ep && (ep->epn.stalled || ep->epn.wedged)) { + ep->epn.stalled = false; + ep->epn.wedged = false; + ast_vhub_update_epn_stall(ep); + } + } + + /* Additional cleanups */ + d->wakeup_en = false; d->enabled = true; } @@ -93,7 +109,6 @@ static void ast_vhub_dev_disable(struct ast_vhub_dev *d) writel(0, d->regs + AST_VHUB_DEV_EN_CTRL); d->gadget.speed = USB_SPEED_UNKNOWN; d->enabled = false; - d->suspended = false; } static int ast_vhub_dev_feature(struct ast_vhub_dev *d, @@ -201,14 +216,19 @@ int ast_vhub_std_dev_request(struct ast_vhub_ep *ep, u16 wValue, wIndex; /* No driver, we shouldn't be enabled ... */ - if (!d->driver || !d->enabled || d->suspended) { + if (!d->driver || !d->enabled) { EPDBG(ep, - "Device is wrong state driver=%p enabled=%d" - " suspended=%d\n", - d->driver, d->enabled, d->suspended); + "Device is wrong state driver=%p enabled=%d\n", + d->driver, d->enabled); return std_req_stall; } + /* + * Note: we used to reject/stall requests while suspended, + * we don't do that anymore as we seem to have cases of + * mass storage getting very upset. + */ + /* First packet, grab speed */ if (d->gadget.speed == USB_SPEED_UNKNOWN) { d->gadget.speed = ep->vhub->speed; @@ -449,8 +469,7 @@ static const struct usb_gadget_ops ast_vhub_udc_ops = { void ast_vhub_dev_suspend(struct ast_vhub_dev *d) { - d->suspended = true; - if (d->driver) { + if (d->driver && d->driver->suspend) { spin_unlock(&d->vhub->lock); d->driver->suspend(&d->gadget); spin_lock(&d->vhub->lock); @@ -459,8 +478,7 @@ void ast_vhub_dev_suspend(struct ast_vhub_dev *d) void ast_vhub_dev_resume(struct ast_vhub_dev *d) { - d->suspended = false; - if (d->driver) { + if (d->driver && d->driver->resume) { spin_unlock(&d->vhub->lock); d->driver->resume(&d->gadget); spin_lock(&d->vhub->lock); @@ -469,46 +487,28 @@ void ast_vhub_dev_resume(struct ast_vhub_dev *d) void ast_vhub_dev_reset(struct ast_vhub_dev *d) { - /* - * If speed is not set, we enable the port. If it is, - * send reset to the gadget and reset "speed". - * - * Speed is an indication that we have got the first - * setup packet to the device. - */ - if (d->gadget.speed == USB_SPEED_UNKNOWN && !d->enabled) { - DDBG(d, "Reset at unknown speed of disabled device, enabling...\n"); - ast_vhub_dev_enable(d); - d->suspended = false; + /* No driver, just disable the device and return */ + if (!d->driver) { + ast_vhub_dev_disable(d); + return; } - if (d->gadget.speed != USB_SPEED_UNKNOWN && d->driver) { - unsigned int i; - DDBG(d, "Reset at known speed of bound device, resetting...\n"); + /* If the port isn't enabled, just enable it */ + if (!d->enabled) { + DDBG(d, "Reset of disabled device, enabling...\n"); + ast_vhub_dev_enable(d); + } else { + DDBG(d, "Reset of enabled device, resetting...\n"); spin_unlock(&d->vhub->lock); - d->driver->reset(&d->gadget); + usb_gadget_udc_reset(&d->gadget, d->driver); spin_lock(&d->vhub->lock); /* - * Disable/re-enable HW, this will clear the address + * Disable and maybe re-enable HW, this will clear the address * and speed setting. */ ast_vhub_dev_disable(d); ast_vhub_dev_enable(d); - - /* Clear stall on all EPs */ - for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) { - struct ast_vhub_ep *ep = d->epns[i]; - - if (ep && ep->epn.stalled) { - ep->epn.stalled = false; - ast_vhub_update_epn_stall(ep); - } - } - - /* Additional cleanups */ - d->wakeup_en = false; - d->suspended = false; } } diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c index e2927fb083cf..022b777b85f8 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c @@ -105,18 +105,20 @@ void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep) (crq.bRequestType & USB_DIR_IN) ? "in" : "out", ep->ep0.state); - /* Check our state, cancel pending requests if needed */ - if (ep->ep0.state != ep0_state_token) { + /* + * Check our state, cancel pending requests if needed + * + * Note: Under some circumstances, we can get a new setup + * packet while waiting for the stall ack, just accept it. + * + * In any case, a SETUP packet in wrong state should have + * reset the HW state machine, so let's just log, nuke + * requests, move on. + */ + if (ep->ep0.state != ep0_state_token && + ep->ep0.state != ep0_state_stall) { EPDBG(ep, "wrong state\n"); ast_vhub_nuke(ep, -EIO); - - /* - * Accept the packet regardless, this seems to happen - * when stalling a SETUP packet that has an OUT data - * phase. - */ - ast_vhub_nuke(ep, 0); - goto stall; } /* Calculate next state for EP0 */ @@ -165,7 +167,7 @@ void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep) stall: EPDBG(ep, "stalling\n"); writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); - ep->ep0.state = ep0_state_status; + ep->ep0.state = ep0_state_stall; ep->ep0.dir_in = false; return; @@ -299,8 +301,8 @@ void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack) if ((ep->ep0.dir_in && (stat & VHUB_EP0_TX_BUFF_RDY)) || (!ep->ep0.dir_in && (stat & VHUB_EP0_RX_BUFF_RDY)) || (ep->ep0.dir_in != in_ack)) { + /* In that case, ignore interrupt */ dev_warn(dev, "irq state mismatch"); - stall = true; break; } /* @@ -335,12 +337,22 @@ void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack) dev_warn(dev, "status direction mismatch\n"); stall = true; } + break; + case ep0_state_stall: + /* + * There shouldn't be any request left, but nuke just in case + * otherwise the stale request will block subsequent ones + */ + ast_vhub_nuke(ep, -EIO); + break; } - /* Reset to token state */ - ep->ep0.state = ep0_state_token; - if (stall) + /* Reset to token state or stall */ + if (stall) { writel(VHUB_EP0_CTRL_STALL, ep->ep0.ctlstat); + ep->ep0.state = ep0_state_stall; + } else + ep->ep0.state = ep0_state_token; } static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req, @@ -367,7 +379,7 @@ static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req, return -EINVAL; /* Disabled device */ - if (ep->dev && (!ep->dev->enabled || ep->dev->suspended)) + if (ep->dev && !ep->dev->enabled) return -ESHUTDOWN; /* Data, no buffer and not internal ? */ @@ -390,8 +402,12 @@ static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req, spin_lock_irqsave(&vhub->lock, flags); /* EP0 can only support a single request at a time */ - if (!list_empty(&ep->queue) || ep->ep0.state == ep0_state_token) { + if (!list_empty(&ep->queue) || + ep->ep0.state == ep0_state_token || + ep->ep0.state == ep0_state_stall) { dev_warn(dev, "EP0: Request in wrong state\n"); + EPVDBG(ep, "EP0: list_empty=%d state=%d\n", + list_empty(&ep->queue), ep->ep0.state); spin_unlock_irqrestore(&vhub->lock, flags); return -EBUSY; } @@ -459,6 +475,15 @@ static const struct usb_ep_ops ast_vhub_ep0_ops = { .free_request = ast_vhub_free_request, }; +void ast_vhub_reset_ep0(struct ast_vhub_dev *dev) +{ + struct ast_vhub_ep *ep = &dev->ep0; + + ast_vhub_nuke(ep, -EIO); + ep->ep0.state = ep0_state_token; +} + + void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep, struct ast_vhub_dev *dev) { diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c index 35941dc125f9..7475c74aa5c5 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c @@ -352,7 +352,7 @@ static int ast_vhub_epn_queue(struct usb_ep* u_ep, struct usb_request *u_req, /* Endpoint enabled ? */ if (!ep->epn.enabled || !u_ep->desc || !ep->dev || !ep->d_idx || - !ep->dev->enabled || ep->dev->suspended) { + !ep->dev->enabled) { EPDBG(ep, "Enqueuing request on wrong or disabled EP\n"); return -ESHUTDOWN; } diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c index 7c040f56100e..19b3517e04c0 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c @@ -449,8 +449,15 @@ static void ast_vhub_change_port_stat(struct ast_vhub *vhub, USB_PORT_STAT_C_OVERCURRENT | USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_L1; - p->change |= chg; + /* + * We only set USB_PORT_STAT_C_ENABLE if we are disabling + * the port as per USB spec, otherwise MacOS gets upset + */ + if (p->status & USB_PORT_STAT_ENABLE) + chg &= ~USB_PORT_STAT_C_ENABLE; + + p->change = chg; ast_vhub_update_hub_ep1(vhub, port); } } @@ -723,6 +730,12 @@ enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, case ClearPortFeature: EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue); return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue); + case ClearTTBuffer: + case ResetTT: + case StopTT: + return std_req_complete; + case GetTTState: + return ast_vhub_simple_reply(ep, 0, 0, 0, 0); default: EPDBG(ep, "Unknown class request\n"); } diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h index 4ed03d33a5a9..761919e220d3 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h @@ -257,6 +257,7 @@ enum ep0_state { ep0_state_token, ep0_state_data, ep0_state_status, + ep0_state_stall, }; /* @@ -353,7 +354,6 @@ struct ast_vhub_dev { struct usb_gadget_driver *driver; bool registered : 1; bool wakeup_en : 1; - bool suspended : 1; bool enabled : 1; /* Endpoint structures */ @@ -507,6 +507,7 @@ void ast_vhub_init_hw(struct ast_vhub *vhub); /* ep0.c */ void ast_vhub_ep0_handle_ack(struct ast_vhub_ep *ep, bool in_ack); void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep); +void ast_vhub_reset_ep0(struct ast_vhub_dev *dev); void ast_vhub_init_ep0(struct ast_vhub *vhub, struct ast_vhub_ep *ep, struct ast_vhub_dev *dev); int ast_vhub_reply(struct ast_vhub_ep *ep, char *ptr, int len); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 503d275bc4c4..86ffc8307864 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -327,6 +327,7 @@ static int usba_config_fifo_table(struct usba_udc *udc) switch (fifo_mode) { default: fifo_mode = 0; + /* fall through */ case 0: udc->fifo_cfg = NULL; n = 0; diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c index c1fcc77403ea..97b16463f3ef 100644 --- a/drivers/usb/gadget/udc/bcm63xx_udc.c +++ b/drivers/usb/gadget/udc/bcm63xx_udc.c @@ -2328,10 +2328,8 @@ static int bcm63xx_udc_probe(struct platform_device *pdev) /* IRQ resource #0: control interrupt (VBUS, speed, etc.) */ irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "missing IRQ resource #0\n"); + if (irq < 0) goto out_uninit; - } if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0, dev_name(dev), udc) < 0) goto report_request_failure; @@ -2339,10 +2337,8 @@ static int bcm63xx_udc_probe(struct platform_device *pdev) /* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */ for (i = 0; i < BCM63XX_NUM_IUDMA; i++) { irq = platform_get_irq(pdev, i + 1); - if (irq < 0) { - dev_err(dev, "missing IRQ resource #%d\n", i + 1); + if (irq < 0) goto out_uninit; - } if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0, dev_name(dev), &udc->iudma[i]) < 0) goto report_request_failure; diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c index ccbd1d34eb2a..cc4a16e253ac 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_core.c +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c @@ -515,10 +515,8 @@ static int bdc_probe(struct platform_device *pdev) return -ENOMEM; } irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "platform_get_irq failed:%d\n", irq); + if (irq < 0) return irq; - } spin_lock_init(&bdc->lock); platform_set_drvdata(pdev, bdc); bdc->irq = irq; diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 7cf34beb50df..92af8dc98c3d 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1143,7 +1143,7 @@ static int check_pending_gadget_drivers(struct usb_udc *udc) dev_name(&udc->dev)) == 0) { ret = udc_bind_to_driver(udc, driver); if (ret != -EPROBE_DEFER) - list_del(&driver->pending); + list_del_init(&driver->pending); break; } diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index 729e60e49564..7a0e9a58c2d8 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -2134,19 +2134,15 @@ static int gr_probe(struct platform_device *pdev) return PTR_ERR(regs); dev->irq = platform_get_irq(pdev, 0); - if (dev->irq <= 0) { - dev_err(dev->dev, "No irq found\n"); + if (dev->irq <= 0) return -ENODEV; - } /* Some core configurations has separate irqs for IN and OUT events */ dev->irqi = platform_get_irq(pdev, 1); if (dev->irqi > 0) { dev->irqo = platform_get_irq(pdev, 2); - if (dev->irqo <= 0) { - dev_err(dev->dev, "Found irqi but not irqo\n"); + if (dev->irqo <= 0) return -ENODEV; - } } else { dev->irqi = 0; } diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index 5f1b14f3e5a0..b3e073fb88c6 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -24,6 +24,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/prefetch.h> #include <linux/proc_fs.h> #include <linux/slab.h> #include <linux/usb/ch9.h> @@ -35,8 +36,6 @@ #include <linux/seq_file.h> #endif -#include <mach/hardware.h> - /* * USB device configuration structure */ @@ -742,7 +741,6 @@ static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd, * response data */ static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd) { - u32 tmp; int to = 1000; /* Write a command and read data from the protocol engine */ @@ -752,7 +750,6 @@ static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd) /* Write command code */ udc_protocol_cmd_w(udc, cmd); - tmp = readl(USBD_DEVINTST(udc->udp_baseaddr)); while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL)) && (to > 0)) to--; @@ -1992,7 +1989,7 @@ void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) /* DMA end of transfer completion */ static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) { - u32 status, epstatus; + u32 status; struct lpc32xx_request *req; struct lpc32xx_usbd_dd_gad *dd; @@ -2086,7 +2083,7 @@ static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep) if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) { udc_clearep_getsts(udc, ep->hwep_num); uda_enable_hwepint(udc, ep->hwep_num); - epstatus = udc_clearep_getsts(udc, ep->hwep_num); + udc_clearep_getsts(udc, ep->hwep_num); /* Let the EP interrupt handle the ZLP */ return; @@ -2198,7 +2195,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc) struct lpc32xx_ep *ep, *ep0 = &udc->ep[0]; struct usb_ctrlrequest ctrlpkt; int i, bytes; - u16 wIndex, wValue, wLength, reqtype, req, tmp; + u16 wIndex, wValue, reqtype, req, tmp; /* Nuke previous transfers */ nuke(ep0, -EPROTO); @@ -2214,7 +2211,6 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc) /* Native endianness */ wIndex = le16_to_cpu(ctrlpkt.wIndex); wValue = le16_to_cpu(ctrlpkt.wValue); - wLength = le16_to_cpu(ctrlpkt.wLength); reqtype = le16_to_cpu(ctrlpkt.bRequestType); /* Set direction of EP0 */ @@ -2265,7 +2261,7 @@ static void udc_handle_ep0_setup(struct lpc32xx_udc *udc) default: break; } - + break; case USB_REQ_SET_ADDRESS: if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) { @@ -3061,11 +3057,8 @@ static int lpc32xx_udc_probe(struct platform_device *pdev) /* Get IRQs */ for (i = 0; i < 4; i++) { udc->udp_irq[i] = platform_get_irq(pdev, i); - if (udc->udp_irq[i] < 0) { - dev_err(udc->dev, - "irq resource %d not available!\n", i); + if (udc->udp_irq[i] < 0) return udc->udp_irq[i]; - } } udc->udp_baseaddr = devm_ioremap_resource(dev, res); diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index b6bbe2e448ba..51efee21915f 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -2244,30 +2244,40 @@ static void usb_reinit_338x(struct net2280 *dev) } /* Hardware Defect and Workaround */ - val = readl(&dev->ll_lfps_regs->ll_lfps_5); + val = readl(&dev->llregs->ll_lfps_5); val &= ~(0xf << TIMER_LFPS_6US); val |= 0x5 << TIMER_LFPS_6US; - writel(val, &dev->ll_lfps_regs->ll_lfps_5); + writel(val, &dev->llregs->ll_lfps_5); - val = readl(&dev->ll_lfps_regs->ll_lfps_6); + val = readl(&dev->llregs->ll_lfps_6); val &= ~(0xffff << TIMER_LFPS_80US); val |= 0x0100 << TIMER_LFPS_80US; - writel(val, &dev->ll_lfps_regs->ll_lfps_6); + writel(val, &dev->llregs->ll_lfps_6); /* * AA_AB Errata. Issue 4. Workaround for SuperSpeed USB * Hot Reset Exit Handshake may Fail in Specific Case using * Default Register Settings. Workaround for Enumeration test. */ - val = readl(&dev->ll_tsn_regs->ll_tsn_counters_2); + val = readl(&dev->llregs->ll_tsn_counters_2); val &= ~(0x1f << HOT_TX_NORESET_TS2); val |= 0x10 << HOT_TX_NORESET_TS2; - writel(val, &dev->ll_tsn_regs->ll_tsn_counters_2); + writel(val, &dev->llregs->ll_tsn_counters_2); - val = readl(&dev->ll_tsn_regs->ll_tsn_counters_3); + val = readl(&dev->llregs->ll_tsn_counters_3); val &= ~(0x1f << HOT_RX_RESET_TS2); val |= 0x3 << HOT_RX_RESET_TS2; - writel(val, &dev->ll_tsn_regs->ll_tsn_counters_3); + writel(val, &dev->llregs->ll_tsn_counters_3); + + /* + * AB errata. Errata 11. Workaround for Default Duration of LFPS + * Handshake Signaling for Device-Initiated U1 Exit is too short. + * Without this, various enumeration failures observed with + * modern superspeed hosts. + */ + val = readl(&dev->llregs->ll_lfps_timers_2); + writel((val & 0xffff0000) | LFPS_TIMERS_2_WORKAROUND_VALUE, + &dev->llregs->ll_lfps_timers_2); /* * Set Recovery Idle to Recover bit: @@ -2276,10 +2286,10 @@ static void usb_reinit_338x(struct net2280 *dev) * - It is safe to set for all connection speeds; all chip revisions. * - R-M-W to leave other bits undisturbed. * - Reference PLX TT-7372 - */ - val = readl(&dev->ll_chicken_reg->ll_tsn_chicken_bit); + */ + val = readl(&dev->llregs->ll_tsn_chicken_bit); val |= BIT(RECOVERY_IDLE_TO_RECOVER_FMW); - writel(val, &dev->ll_chicken_reg->ll_tsn_chicken_bit); + writel(val, &dev->llregs->ll_tsn_chicken_bit); INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); @@ -3669,12 +3679,6 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id) (base + 0x00b4); dev->llregs = (struct usb338x_ll_regs __iomem *) (base + 0x0700); - dev->ll_lfps_regs = (struct usb338x_ll_lfps_regs __iomem *) - (base + 0x0748); - dev->ll_tsn_regs = (struct usb338x_ll_tsn_regs __iomem *) - (base + 0x077c); - dev->ll_chicken_reg = (struct usb338x_ll_chi_regs __iomem *) - (base + 0x079c); dev->plregs = (struct usb338x_pl_regs __iomem *) (base + 0x0800); usbstat = readl(&dev->usb->usbstat); diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h index b65a797544d7..85d3ca1698ba 100644 --- a/drivers/usb/gadget/udc/net2280.h +++ b/drivers/usb/gadget/udc/net2280.h @@ -178,9 +178,6 @@ struct net2280 { struct net2280_dep_regs __iomem *dep; struct net2280_ep_regs __iomem *epregs; struct usb338x_ll_regs __iomem *llregs; - struct usb338x_ll_lfps_regs __iomem *ll_lfps_regs; - struct usb338x_ll_tsn_regs __iomem *ll_tsn_regs; - struct usb338x_ll_chi_regs __iomem *ll_chicken_reg; struct usb338x_pl_regs __iomem *plregs; struct dma_pool *requests; diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c index cded51f36fc1..265dab2bbfac 100644 --- a/drivers/usb/gadget/udc/pch_udc.c +++ b/drivers/usb/gadget/udc/pch_udc.c @@ -3046,8 +3046,7 @@ static void pch_udc_remove(struct pci_dev *pdev) #ifdef CONFIG_PM_SLEEP static int pch_udc_suspend(struct device *d) { - struct pci_dev *pdev = to_pci_dev(d); - struct pch_udc_dev *dev = pci_get_drvdata(pdev); + struct pch_udc_dev *dev = dev_get_drvdata(d); pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK); pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL); diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 1f4c3fbd1df8..e098f16c01cb 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -2744,10 +2744,8 @@ static int renesas_usb3_probe(struct platform_device *pdev) priv = of_device_get_match_data(&pdev->dev); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq); + if (irq < 0) return irq; - } usb3 = devm_kzalloc(&pdev->dev, sizeof(*usb3), GFP_KERNEL); if (!usb3) diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c index 31c7c5587cf9..858993c73442 100644 --- a/drivers/usb/gadget/udc/s3c-hsudc.c +++ b/drivers/usb/gadget/udc/s3c-hsudc.c @@ -1311,10 +1311,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) s3c_hsudc_setup_ep(hsudc); ret = platform_get_irq(pdev, 0); - if (ret < 0) { - dev_err(dev, "unable to obtain IRQ number\n"); + if (ret < 0) goto err_res; - } hsudc->irq = ret; ret = devm_request_irq(&pdev->dev, hsudc->irq, s3c_hsudc_irq, 0, diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index af3e63316ace..f82208fbc249 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -312,6 +312,7 @@ static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep, switch (idx) { default: idx = 0; + /* fall through */ case 0: fifo_reg = S3C2410_UDC_EP0_FIFO_REG; break; @@ -416,6 +417,7 @@ static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, switch (idx) { default: idx = 0; + /* fall through */ case 0: fifo_reg = S3C2410_UDC_EP0_FIFO_REG; break; diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index b1f4104d1283..29d8e5f8bb58 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -2074,10 +2074,8 @@ static int xudc_probe(struct platform_device *pdev) return PTR_ERR(udc->addr); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "unable to get irq\n"); + if (irq < 0) return irq; - } ret = devm_request_irq(&pdev->dev, irq, xudc_irq, 0, dev_name(&pdev->dev), udc); if (ret < 0) { diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 40b5de597112..79b2e79dddd0 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -287,12 +287,6 @@ config USB_EHCI_MV Dova, Armada 370 and Armada XP. See "Support for Marvell EBU on-chip EHCI USB controller" for those. -config USB_W90X900_EHCI - tristate "W90X900(W90P910) EHCI support" - depends on ARCH_W90X900 - ---help--- - Enables support for the W90X900 USB controller - config USB_CNS3XXX_EHCI bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" depends on ARCH_CNS3XXX @@ -441,7 +435,8 @@ config USB_OHCI_HCD_S3C2410 config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller" - depends on USB_OHCI_HCD && ARCH_LPC32XX + depends on USB_OHCI_HCD + depends on ARCH_LPC32XX || COMPILE_TEST depends on USB_ISP1301 default y ---help--- @@ -717,32 +712,6 @@ config USB_RENESAS_USBHS_HCD To compile this driver as a module, choose M here: the module will be called renesas-usbhs. -config USB_WHCI_HCD - tristate "Wireless USB Host Controller Interface (WHCI) driver" - depends on USB_PCI && USB && UWB - select USB_WUSB - select UWB_WHCI - help - A driver for PCI-based Wireless USB Host Controllers that are - compliant with the WHCI specification. - - To compile this driver a module, choose M here: the module - will be called "whci-hcd". - -config USB_HWA_HCD - tristate "Host Wire Adapter (HWA) driver" - depends on USB && UWB - select USB_WUSB - select UWB_HWA - help - This driver enables you to connect Wireless USB devices to - your system using a Host Wire Adaptor USB dongle. This is an - UWB Radio Controller and WUSB Host Controller connected to - your machine via USB (specified in WUSB1.0). - - To compile this driver a module, choose M here: the module - will be called "hwa-hc". - config USB_IMX21_HCD tristate "i.MX21 HCD support" depends on ARM && ARCH_MXC diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 84514f71ae44..b191361257cc 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -35,8 +35,6 @@ ifneq ($(CONFIG_DEBUG_FS),) xhci-hcd-y += xhci-debugfs.o endif -obj-$(CONFIG_USB_WHCI_HCD) += whci/ - obj-$(CONFIG_USB_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o @@ -51,7 +49,6 @@ obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o -obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o @@ -82,7 +79,6 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o -obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_USB2) += fsl-mph-dr-of.o obj-$(CONFIG_USB_EHCI_FSL) += fsl-mph-dr-of.o diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 3ba140ceaf52..e893467d659c 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -100,9 +100,6 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(&pdev->dev, - "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); retval = -ENODEV; goto fail_create_hcd; } diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 3a29a1a8519c..01debfd03d4a 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -41,6 +41,7 @@ struct exynos_ehci_hcd { struct clk *clk; struct device_node *of_node; struct phy *phy[PHY_NUMBER]; + bool legacy_phy; }; #define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv) @@ -50,10 +51,22 @@ static int exynos_ehci_get_phy(struct device *dev, { struct device_node *child; struct phy *phy; - int phy_number; + int phy_number, num_phys; int ret; /* Get PHYs for the controller */ + num_phys = of_count_phandle_with_args(dev->of_node, "phys", + "#phy-cells"); + for (phy_number = 0; phy_number < num_phys; phy_number++) { + phy = devm_of_phy_get_by_index(dev, dev->of_node, phy_number); + if (IS_ERR(phy)) + return PTR_ERR(phy); + exynos_ehci->phy[phy_number] = phy; + } + if (num_phys > 0) + return 0; + + /* Get PHYs using legacy bindings */ for_each_available_child_of_node(dev->of_node, child) { ret = of_property_read_u32(child, "reg", &phy_number); if (ret) { @@ -84,6 +97,7 @@ static int exynos_ehci_get_phy(struct device *dev, } } + exynos_ehci->legacy_phy = true; return 0; } @@ -205,11 +219,12 @@ static int exynos_ehci_probe(struct platform_device *pdev) ehci->caps = hcd->regs; /* - * Workaround: reset of_node pointer to avoid conflict between Exynos - * EHCI port subnodes and generic USB device bindings + * Workaround: reset of_node pointer to avoid conflict between legacy + * Exynos EHCI port subnodes and generic USB device bindings */ exynos_ehci->of_node = pdev->dev.of_node; - pdev->dev.of_node = NULL; + if (exynos_ehci->legacy_phy) + pdev->dev.of_node = NULL; /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c index 656b8c08efc8..a2c3b4ec8a8b 100644 --- a/drivers/usb/host/ehci-grlib.c +++ b/drivers/usb/host/ehci-grlib.c @@ -30,7 +30,7 @@ static const struct hc_driver ehci_grlib_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, /* * basic lifecycle operations diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9da7e22848c9..cf2b7ae93b7e 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1193,7 +1193,7 @@ static const struct hc_driver ehci_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, /* * basic lifecycle operations diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 7d20296cbe9f..fc125b3d06e7 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -115,10 +115,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "EHCI irq failed: %d\n", irq); + if (irq < 0) return irq; - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regs = devm_ioremap_resource(dev, res); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 790acf3633e8..a319b1df3011 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -223,9 +223,6 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(&pdev->dev, - "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); err = -ENODEV; goto err; } diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 4c306fb6b069..769749ca5961 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -145,10 +145,8 @@ static int ehci_platform_probe(struct platform_device *dev) } irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "no irq provided"); + if (irq < 0) return irq; - } hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, dev_name(&dev->dev)); diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c index 46e160370d6e..a2b610dbedfc 100644 --- a/drivers/usb/host/ehci-pmcmsp.c +++ b/drivers/usb/host/ehci-pmcmsp.c @@ -250,7 +250,7 @@ static const struct hc_driver ehci_msp_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, /* * basic lifecycle operations diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index 576f7d79ad4e..6bbaee74f7e7 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -31,7 +31,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, /* * basic lifecycle operations diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 454d8c624a3f..fb52133c3557 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -59,7 +59,7 @@ static const struct hc_driver ps3_ehci_hc_driver = { .product_desc = "PS3 EHCI Host Controller", .hcd_priv_size = sizeof(struct ehci_hcd), .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, .reset = ps3_ehci_hc_reset, .start = ehci_run, .stop = ehci_stop, diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index a9ee767952c1..2afde14dc425 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -33,7 +33,7 @@ static const struct hc_driver ehci_sh_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY | HCD_BH, + .flags = HCD_USB2 | HCD_DMA | HCD_MEMORY | HCD_BH, /* * basic lifecycle operations @@ -85,9 +85,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(&pdev->dev, - "Found HC with no IRQ. Check %s setup!\n", - dev_name(&pdev->dev)); ret = -ENODEV; goto fail_create_hcd; } diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c index ccb4e611001d..f74433aac948 100644 --- a/drivers/usb/host/ehci-st.c +++ b/drivers/usb/host/ehci-st.c @@ -158,10 +158,8 @@ static int st_ehci_platform_probe(struct platform_device *dev) return -ENODEV; irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "no irq provided"); + if (irq < 0) return irq; - } res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_mem) { dev_err(&dev->dev, "no memory resource provided"); diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c deleted file mode 100644 index 6d77ace1697b..000000000000 --- a/drivers/usb/host/ehci-w90x900.c +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/driver/usb/host/ehci-w90x900.c - * - * Copyright (c) 2008 Nuvoton technology corporation. - * - * Wan ZongShun <mcuos.com@gmail.com> - */ - -#include <linux/dma-mapping.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/usb.h> -#include <linux/usb/hcd.h> - -#include "ehci.h" - -/* enable phy0 and phy1 for w90p910 */ -#define ENPHY (0x01<<8) -#define PHY0_CTR (0xA4) -#define PHY1_CTR (0xA8) - -#define DRIVER_DESC "EHCI w90x900 driver" - -static const char hcd_name[] = "ehci-w90x900 "; - -static struct hc_driver __read_mostly ehci_w90x900_hc_driver; - -static int ehci_w90x900_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - struct resource *res; - int retval = 0, irq; - unsigned long val; - - hcd = usb_create_hcd(&ehci_w90x900_hc_driver, - &pdev->dev, "w90x900 EHCI"); - if (!hcd) { - retval = -ENOMEM; - goto err1; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hcd->regs)) { - retval = PTR_ERR(hcd->regs); - goto err2; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - ehci = hcd_to_ehci(hcd); - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - - /* enable PHY 0,1,the regs only apply to w90p910 - * 0xA4,0xA8 were offsets of PHY0 and PHY1 controller of - * w90p910 IC relative to ehci->regs. - */ - val = __raw_readl(ehci->regs+PHY0_CTR); - val |= ENPHY; - __raw_writel(val, ehci->regs+PHY0_CTR); - - val = __raw_readl(ehci->regs+PHY1_CTR); - val |= ENPHY; - __raw_writel(val, ehci->regs+PHY1_CTR); - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - retval = irq; - goto err2; - } - - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval != 0) - goto err2; - - device_wakeup_enable(hcd->self.controller); - return retval; -err2: - usb_put_hcd(hcd); -err1: - return retval; -} - -static int ehci_w90x900_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ehci_hcd_w90x900_driver = { - .probe = ehci_w90x900_probe, - .remove = ehci_w90x900_remove, - .driver = { - .name = "w90x900-ehci", - }, -}; - -static int __init ehci_w90X900_init(void) -{ - if (usb_disabled()) - return -ENODEV; - - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - - ehci_init_driver(&ehci_w90x900_hc_driver, NULL); - return platform_driver_register(&ehci_hcd_w90x900_driver); -} -module_init(ehci_w90X900_init); - -static void __exit ehci_w90X900_cleanup(void) -{ - platform_driver_unregister(&ehci_hcd_w90x900_driver); -} -module_exit(ehci_w90X900_cleanup); - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); -MODULE_ALIAS("platform:w90p910-ehci"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index d2a27578e440..67a6ee8cb5d8 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -66,7 +66,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = { * generic hardware linkage */ .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, /* * basic lifecycle operations diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 48fe9e6c2465..04733876c9c6 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -538,7 +538,7 @@ static const struct hc_driver fhci_driver = { /* generic hardware linkage */ .irq = fhci_irq, - .flags = HCD_USB11 | HCD_MEMORY, + .flags = HCD_DMA | HCD_USB11 | HCD_MEMORY, /* basic lifecycle operation */ .start = fhci_start, diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 0dbfa5c10703..9e0c98d6bdb0 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -5508,7 +5508,7 @@ static const struct hc_driver fotg210_fotg210_hc_driver = { * generic hardware linkage */ .irq = fotg210_irq, - .flags = HCD_MEMORY | HCD_USB2, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB2, /* * basic lifecycle operations diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c deleted file mode 100644 index 6968b9f2b76b..000000000000 --- a/drivers/usb/host/hwa-hc.c +++ /dev/null @@ -1,875 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Host Wire Adapter: - * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * The HWA driver is a simple layer that forwards requests to the WAHC - * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host - * Controller) layers. - * - * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB - * Host Controller that is connected to your system via USB (a USB - * dongle that implements a USB host...). There is also a Device Wired - * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for - * transferring data (it is after all a USB host connected via - * Wireless USB), we have a common layer called Wire Adapter Host - * Controller that does all the hard work. The WUSBHC (Wireless USB - * Host Controller) is the part common to WUSB Host Controllers, the - * HWA and the PCI-based one, that is implemented following the WHCI - * spec. All these layers are implemented in ../wusbcore. - * - * The main functions are hwahc_op_urb_{en,de}queue(), that pass the - * job of converting a URB to a Wire Adapter - * - * Entry points: - * - * hwahc_driver_*() Driver initialization, registration and - * teardown. - * - * hwahc_probe() New device came up, create an instance for - * it [from device enumeration]. - * - * hwahc_disconnect() Remove device instance [from device - * enumeration]. - * - * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for - * starting/stopping/etc (some might be made also - * DWA). - */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/workqueue.h> -#include <linux/wait.h> -#include <linux/completion.h> -#include "../wusbcore/wa-hc.h" -#include "../wusbcore/wusbhc.h" - -struct hwahc { - struct wusbhc wusbhc; /* has to be 1st */ - struct wahc wa; -}; - -/* - * FIXME should be wusbhc - * - * NOTE: we need to cache the Cluster ID because later...there is no - * way to get it :) - */ -static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id) -{ - int result; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct wahc *wa = &hwahc->wa; - struct device *dev = &wa->usb_iface->dev; - - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_CLUSTER_ID, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - cluster_id, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n", - cluster_id, result); - else - wusbhc->cluster_id = cluster_id; - dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id); - return result; -} - -static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_NUM_DNTS, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - interval << 8 | slots, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - -/* - * Reset a WUSB host controller and wait for it to complete doing it. - * - * @usb_hcd: Pointer to WUSB Host Controller instance. - * - */ -static int hwahc_op_reset(struct usb_hcd *usb_hcd) -{ - int result; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct device *dev = &hwahc->wa.usb_iface->dev; - - mutex_lock(&wusbhc->mutex); - wa_nep_disarm(&hwahc->wa); - result = __wa_set_feature(&hwahc->wa, WA_RESET); - if (result < 0) { - dev_err(dev, "error commanding HC to reset: %d\n", result); - goto error_unlock; - } - result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0); - if (result < 0) { - dev_err(dev, "error waiting for HC to reset: %d\n", result); - goto error_unlock; - } -error_unlock: - mutex_unlock(&wusbhc->mutex); - return result; -} - -/* - * FIXME: break this function up - */ -static int hwahc_op_start(struct usb_hcd *usb_hcd) -{ - u8 addr; - int result; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - result = -ENOSPC; - mutex_lock(&wusbhc->mutex); - addr = wusb_cluster_id_get(); - if (addr == 0) - goto error_cluster_id_get; - result = __hwahc_set_cluster_id(hwahc, addr); - if (result < 0) - goto error_set_cluster_id; - - usb_hcd->uses_new_polling = 1; - set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); - usb_hcd->state = HC_STATE_RUNNING; - - /* - * prevent USB core from suspending the root hub since - * bus_suspend and bus_resume are not yet supported. - */ - pm_runtime_get_noresume(&usb_hcd->self.root_hub->dev); - - result = 0; -out: - mutex_unlock(&wusbhc->mutex); - return result; - -error_set_cluster_id: - wusb_cluster_id_put(addr); -error_cluster_id_get: - goto out; - -} - -/* - * No need to abort pipes, as when this is called, all the children - * has been disconnected and that has done it [through - * usb_disable_interface() -> usb_disable_endpoint() -> - * hwahc_op_ep_disable() - >rpipe_ep_disable()]. - */ -static void hwahc_op_stop(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - - mutex_lock(&wusbhc->mutex); - wusb_cluster_id_put(wusbhc->cluster_id); - mutex_unlock(&wusbhc->mutex); -} - -static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - - /* - * We cannot query the HWA for the WUSB time since that requires sending - * a synchronous URB and this function can be called in_interrupt. - * Instead, query the USB frame number for our parent and use that. - */ - return usb_get_current_frame_number(wa->usb_dev); -} - -static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, - gfp_t gfp) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp); -} - -static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, - int status) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - return wa_urb_dequeue(&hwahc->wa, urb, status); -} - -/* - * Release resources allocated for an endpoint - * - * If there is an associated rpipe to this endpoint, go ahead and put it. - */ -static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd, - struct usb_host_endpoint *ep) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - rpipe_ep_disable(&hwahc->wa, ep); -} - -static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) -{ - int result; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct device *dev = &hwahc->wa.usb_iface->dev; - - result = __wa_set_feature(&hwahc->wa, WA_ENABLE); - if (result < 0) { - dev_err(dev, "error commanding HC to start: %d\n", result); - goto error_stop; - } - result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE); - if (result < 0) { - dev_err(dev, "error waiting for HC to start: %d\n", result); - goto error_stop; - } - result = wa_nep_arm(&hwahc->wa, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "cannot listen to notifications: %d\n", result); - goto error_stop; - } - /* - * If WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS is set, - * disable transfer notifications. - */ - if (hwahc->wa.quirks & - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS) { - struct usb_host_interface *cur_altsetting = - hwahc->wa.usb_iface->cur_altsetting; - - result = usb_control_msg(hwahc->wa.usb_dev, - usb_sndctrlpipe(hwahc->wa.usb_dev, 0), - WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS, - USB_DIR_OUT | USB_TYPE_VENDOR | - USB_RECIP_INTERFACE, - WA_REQ_ALEREON_FEATURE_SET, - cur_altsetting->desc.bInterfaceNumber, - NULL, 0, - USB_CTRL_SET_TIMEOUT); - /* - * If we successfully sent the control message, start DTI here - * because no transfer notifications will be received which is - * where DTI is normally started. - */ - if (result == 0) - result = wa_dti_start(&hwahc->wa); - else - result = 0; /* OK. Continue normally. */ - - if (result < 0) { - dev_err(dev, "cannot start DTI: %d\n", result); - goto error_dti_start; - } - } - - return result; - -error_dti_start: - wa_nep_disarm(&hwahc->wa); -error_stop: - __wa_clear_feature(&hwahc->wa, WA_ENABLE); - return result; -} - -static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc, int delay) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - int ret; - - ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_CHAN_STOP, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - delay * 1000, - iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (ret == 0) - msleep(delay); - - wa_nep_disarm(&hwahc->wa); - __wa_stop(&hwahc->wa); -} - -/* - * Set the UWB MAS allocation for the WUSB cluster - * - * @stream_index: stream to use (-1 for cancelling the allocation) - * @mas: mas bitmap to use - */ -static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index, - const struct uwb_mas_bm *mas) -{ - int result; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - struct device *dev = &wa->usb_iface->dev; - u8 mas_le[UWB_NUM_MAS/8]; - - /* Set the stream index */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_STREAM_IDX, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - stream_index, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Cannot set WUSB stream index: %d\n", result); - goto out; - } - uwb_mas_bm_copy_le(mas_le, mas); - /* Set the MAS allocation */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_WUSB_MAS, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - mas_le, 32, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result); -out: - return result; -} - -/* - * Add an IE to the host's MMC - * - * @interval: See WUSB1.0[8.5.3.1] - * @repeat_cnt: See WUSB1.0[8.5.3.1] - * @handle: See WUSB1.0[8.5.3.1] - * @wuie: Pointer to the header of the WUSB IE data to add. - * MUST BE allocated in a kmalloc buffer (no stack or - * vmalloc). - * - * NOTE: the format of the WUSB IEs for MMCs are different to the - * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length + - * Id in WUSB IEs). Standards...you gotta love'em. - */ -static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval, - u8 repeat_cnt, u8 handle, - struct wuie_hdr *wuie) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_ADD_MMC_IE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - interval << 8 | repeat_cnt, - handle << 8 | iface_no, - wuie, wuie->bLength, USB_CTRL_SET_TIMEOUT); -} - -/* - * Remove an IE to the host's MMC - * - * @handle: See WUSB1.0[8.5.3.1] - */ -static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_REMOVE_MMC_IE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, handle << 8 | iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - -/* - * Update device information for a given fake port - * - * @port_idx: Fake port to which device is connected (wusbhc index, not - * USB port number). - */ -static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc, - struct wusb_dev *wusb_dev) -{ - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - struct hwa_dev_info *dev_info; - int ret; - - /* fill out the Device Info buffer and send it */ - dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL); - if (!dev_info) - return -ENOMEM; - uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability, - &wusb_dev->availability); - dev_info->bDeviceAddress = wusb_dev->addr; - - /* - * If the descriptors haven't been read yet, use a default PHY - * rate of 53.3 Mbit/s only. The correct value will be used - * when this will be called again as part of the - * authentication process (which occurs after the descriptors - * have been read). - */ - if (wusb_dev->wusb_cap_descr) - dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates; - else - dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53); - - ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - WUSB_REQ_SET_DEV_INFO, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wusb_dev->port_idx << 8 | iface_no, - dev_info, sizeof(struct hwa_dev_info), - USB_CTRL_SET_TIMEOUT); - kfree(dev_info); - return ret; -} - -/* - * Set host's idea of which encryption (and key) method to use when - * talking to ad evice on a given port. - * - * If key is NULL, it means disable encryption for that "virtual port" - * (used when we disconnect). - */ -static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *key, size_t key_size, - u8 key_idx) -{ - int result = -ENOMEM; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - struct usb_key_descriptor *keyd; - size_t keyd_len; - - keyd_len = sizeof(*keyd) + key_size; - keyd = kzalloc(keyd_len, GFP_KERNEL); - if (keyd == NULL) - return -ENOMEM; - - keyd->bLength = keyd_len; - keyd->bDescriptorType = USB_DT_KEY; - keyd->tTKID[0] = (tkid >> 0) & 0xff; - keyd->tTKID[1] = (tkid >> 8) & 0xff; - keyd->tTKID[2] = (tkid >> 16) & 0xff; - memcpy(keyd->bKeyData, key, key_size); - - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_SET_DESCRIPTOR, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - USB_DT_KEY << 8 | key_idx, - port_idx << 8 | iface_no, - keyd, keyd_len, USB_CTRL_SET_TIMEOUT); - - kzfree(keyd); /* clear keys etc. */ - return result; -} - -/* - * Set host's idea of which encryption (and key) method to use when - * talking to ad evice on a given port. - * - * If key is NULL, it means disable encryption for that "virtual port" - * (used when we disconnect). - */ -static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *key, size_t key_size) -{ - int result = -ENOMEM; - struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); - struct wahc *wa = &hwahc->wa; - u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; - u8 encryption_value; - - /* Tell the host which key to use to talk to the device */ - if (key) { - u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK, - WUSB_KEY_INDEX_ORIGINATOR_HOST); - - result = __hwahc_dev_set_key(wusbhc, port_idx, tkid, - key, key_size, key_idx); - if (result < 0) - goto error_set_key; - encryption_value = wusbhc->ccm1_etd->bEncryptionValue; - } else { - /* FIXME: this should come from wusbhc->etd[UNSECURE].value */ - encryption_value = 0; - } - - /* Set the encryption type for communicating with the device */ - result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_SET_ENCRYPTION, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - encryption_value, port_idx << 8 | iface_no, - NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(wusbhc->dev, "Can't set host's WUSB encryption for " - "port index %u to %s (value %d): %d\n", port_idx, - wusb_et_name(wusbhc->ccm1_etd->bEncryptionType), - wusbhc->ccm1_etd->bEncryptionValue, result); -error_set_key: - return result; -} - -/* - * Set host's GTK key - */ -static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid, - const void *key, size_t key_size) -{ - u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, - WUSB_KEY_INDEX_ORIGINATOR_HOST); - - return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx); -} - -/* - * Get the Wire Adapter class-specific descriptor - * - * NOTE: this descriptor comes with the big bundled configuration - * descriptor that includes the interfaces' and endpoints', so - * we just look for it in the cached copy kept by the USB stack. - * - * NOTE2: We convert LE fields to CPU order. - */ -static int wa_fill_descr(struct wahc *wa) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - char *itr; - struct usb_device *usb_dev = wa->usb_dev; - struct usb_descriptor_header *hdr; - struct usb_wa_descriptor *wa_descr; - size_t itr_size, actconfig_idx; - - actconfig_idx = (usb_dev->actconfig - usb_dev->config) / - sizeof(usb_dev->config[0]); - itr = usb_dev->rawdescriptors[actconfig_idx]; - itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); - while (itr_size >= sizeof(*hdr)) { - hdr = (struct usb_descriptor_header *) itr; - dev_dbg(dev, "Extra device descriptor: " - "type %02x/%u bytes @ %zu (%zu left)\n", - hdr->bDescriptorType, hdr->bLength, - (itr - usb_dev->rawdescriptors[actconfig_idx]), - itr_size); - if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER) - goto found; - itr += hdr->bLength; - itr_size -= hdr->bLength; - } - dev_err(dev, "cannot find Wire Adapter Class descriptor\n"); - return -ENODEV; - -found: - result = -EINVAL; - if (hdr->bLength > itr_size) { /* is it available? */ - dev_err(dev, "incomplete Wire Adapter Class descriptor " - "(%zu bytes left, %u needed)\n", - itr_size, hdr->bLength); - goto error; - } - if (hdr->bLength < sizeof(*wa->wa_descr)) { - dev_err(dev, "short Wire Adapter Class descriptor\n"); - goto error; - } - wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; - if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100) - dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", - (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8, - le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff); - result = 0; -error: - return result; -} - -static const struct hc_driver hwahc_hc_driver = { - .description = "hwa-hcd", - .product_desc = "Wireless USB HWA host controller", - .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd), - .irq = NULL, /* FIXME */ - .flags = HCD_USB25, - .reset = hwahc_op_reset, - .start = hwahc_op_start, - .stop = hwahc_op_stop, - .get_frame_number = hwahc_op_get_frame_number, - .urb_enqueue = hwahc_op_urb_enqueue, - .urb_dequeue = hwahc_op_urb_dequeue, - .endpoint_disable = hwahc_op_endpoint_disable, - - .hub_status_data = wusbhc_rh_status_data, - .hub_control = wusbhc_rh_control, - .start_port_reset = wusbhc_rh_start_port_reset, -}; - -static int hwahc_security_create(struct hwahc *hwahc) -{ - int result; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct usb_device *usb_dev = hwahc->wa.usb_dev; - struct device *dev = &usb_dev->dev; - struct usb_security_descriptor *secd; - struct usb_encryption_descriptor *etd; - void *itr, *top; - size_t itr_size, needed, bytes; - u8 index; - char buf[64]; - - /* Find the host's security descriptors in the config descr bundle */ - index = (usb_dev->actconfig - usb_dev->config) / - sizeof(usb_dev->config[0]); - itr = usb_dev->rawdescriptors[index]; - itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); - top = itr + itr_size; - result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], - le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), - USB_DT_SECURITY, (void **) &secd, sizeof(*secd)); - if (result == -1) { - dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); - return 0; - } - needed = sizeof(*secd); - if (top - (void *)secd < needed) { - dev_err(dev, "BUG? Not enough data to process security " - "descriptor header (%zu bytes left vs %zu needed)\n", - top - (void *) secd, needed); - return 0; - } - needed = le16_to_cpu(secd->wTotalLength); - if (top - (void *)secd < needed) { - dev_err(dev, "BUG? Not enough data to process security " - "descriptors (%zu bytes left vs %zu needed)\n", - top - (void *) secd, needed); - return 0; - } - /* Walk over the sec descriptors and store CCM1's on wusbhc */ - itr = (void *) secd + sizeof(*secd); - top = (void *) secd + le16_to_cpu(secd->wTotalLength); - index = 0; - bytes = 0; - while (itr < top) { - etd = itr; - if (top - itr < sizeof(*etd)) { - dev_err(dev, "BUG: bad host security descriptor; " - "not enough data (%zu vs %zu left)\n", - top - itr, sizeof(*etd)); - break; - } - if (etd->bLength < sizeof(*etd)) { - dev_err(dev, "BUG: bad host encryption descriptor; " - "descriptor is too short " - "(%zu vs %zu needed)\n", - (size_t)etd->bLength, sizeof(*etd)); - break; - } - itr += etd->bLength; - bytes += snprintf(buf + bytes, sizeof(buf) - bytes, - "%s (0x%02x) ", - wusb_et_name(etd->bEncryptionType), - etd->bEncryptionValue); - wusbhc->ccm1_etd = etd; - } - dev_info(dev, "supported encryption types: %s\n", buf); - if (wusbhc->ccm1_etd == NULL) { - dev_err(dev, "E: host doesn't support CCM-1 crypto\n"); - return 0; - } - /* Pretty print what we support */ - return 0; -} - -static void hwahc_security_release(struct hwahc *hwahc) -{ - /* nothing to do here so far... */ -} - -static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface, - kernel_ulong_t quirks) -{ - int result; - struct device *dev = &iface->dev; - struct wusbhc *wusbhc = &hwahc->wusbhc; - struct wahc *wa = &hwahc->wa; - struct usb_device *usb_dev = interface_to_usbdev(iface); - - wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ - wa->usb_iface = usb_get_intf(iface); - wusbhc->dev = dev; - /* defer getting the uwb_rc handle until it is needed since it - * may not have been registered by the hwa_rc driver yet. */ - wusbhc->uwb_rc = NULL; - result = wa_fill_descr(wa); /* Get the device descriptor */ - if (result < 0) - goto error_fill_descriptor; - if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) { - dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB " - "adapter (%u ports)\n", wa->wa_descr->bNumPorts); - wusbhc->ports_max = USB_MAXCHILDREN; - } else { - wusbhc->ports_max = wa->wa_descr->bNumPorts; - } - wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs; - wusbhc->start = __hwahc_op_wusbhc_start; - wusbhc->stop = __hwahc_op_wusbhc_stop; - wusbhc->mmcie_add = __hwahc_op_mmcie_add; - wusbhc->mmcie_rm = __hwahc_op_mmcie_rm; - wusbhc->dev_info_set = __hwahc_op_dev_info_set; - wusbhc->bwa_set = __hwahc_op_bwa_set; - wusbhc->set_num_dnts = __hwahc_op_set_num_dnts; - wusbhc->set_ptk = __hwahc_op_set_ptk; - wusbhc->set_gtk = __hwahc_op_set_gtk; - result = hwahc_security_create(hwahc); - if (result < 0) { - dev_err(dev, "Can't initialize security: %d\n", result); - goto error_security_create; - } - wa->wusb = wusbhc; /* FIXME: ugly, need to fix */ - result = wusbhc_create(&hwahc->wusbhc); - if (result < 0) { - dev_err(dev, "Can't create WUSB HC structures: %d\n", result); - goto error_wusbhc_create; - } - result = wa_create(&hwahc->wa, iface, quirks); - if (result < 0) - goto error_wa_create; - return 0; - -error_wa_create: - wusbhc_destroy(&hwahc->wusbhc); -error_wusbhc_create: - /* WA Descr fill allocs no resources */ -error_security_create: -error_fill_descriptor: - usb_put_intf(iface); - usb_put_dev(usb_dev); - return result; -} - -static void hwahc_destroy(struct hwahc *hwahc) -{ - struct wusbhc *wusbhc = &hwahc->wusbhc; - - mutex_lock(&wusbhc->mutex); - __wa_destroy(&hwahc->wa); - wusbhc_destroy(&hwahc->wusbhc); - hwahc_security_release(hwahc); - hwahc->wusbhc.dev = NULL; - uwb_rc_put(wusbhc->uwb_rc); - usb_put_intf(hwahc->wa.usb_iface); - usb_put_dev(hwahc->wa.usb_dev); - mutex_unlock(&wusbhc->mutex); -} - -static void hwahc_init(struct hwahc *hwahc) -{ - wa_init(&hwahc->wa); -} - -static int hwahc_probe(struct usb_interface *usb_iface, - const struct usb_device_id *id) -{ - int result; - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct hwahc *hwahc; - struct device *dev = &usb_iface->dev; - - result = -ENOMEM; - usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa"); - if (usb_hcd == NULL) { - dev_err(dev, "unable to allocate instance\n"); - goto error_alloc; - } - usb_hcd->wireless = 1; - usb_hcd->self.sg_tablesize = ~0; - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - hwahc = container_of(wusbhc, struct hwahc, wusbhc); - hwahc_init(hwahc); - result = hwahc_create(hwahc, usb_iface, id->driver_info); - if (result < 0) { - dev_err(dev, "Cannot initialize internals: %d\n", result); - goto error_hwahc_create; - } - result = usb_add_hcd(usb_hcd, 0, 0); - if (result < 0) { - dev_err(dev, "Cannot add HCD: %d\n", result); - goto error_add_hcd; - } - device_wakeup_enable(usb_hcd->self.controller); - result = wusbhc_b_create(&hwahc->wusbhc); - if (result < 0) { - dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result); - goto error_wusbhc_b_create; - } - return 0; - -error_wusbhc_b_create: - usb_remove_hcd(usb_hcd); -error_add_hcd: - hwahc_destroy(hwahc); -error_hwahc_create: - usb_put_hcd(usb_hcd); -error_alloc: - return result; -} - -static void hwahc_disconnect(struct usb_interface *usb_iface) -{ - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct hwahc *hwahc; - - usb_hcd = usb_get_intfdata(usb_iface); - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - hwahc = container_of(wusbhc, struct hwahc, wusbhc); - - wusbhc_b_destroy(&hwahc->wusbhc); - usb_remove_hcd(usb_hcd); - hwahc_destroy(hwahc); - usb_put_hcd(usb_hcd); -} - -static const struct usb_device_id hwahc_id_table[] = { - /* Alereon 5310 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, - /* Alereon 5611 */ - { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, - /* FIXME: use class labels for this */ - { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, - {}, -}; -MODULE_DEVICE_TABLE(usb, hwahc_id_table); - -static struct usb_driver hwahc_driver = { - .name = "hwa-hc", - .probe = hwahc_probe, - .disconnect = hwahc_disconnect, - .id_table = hwahc_id_table, -}; - -module_usb_driver(hwahc_driver); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 6e3dad19d369..5835f9966204 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1771,7 +1771,7 @@ static const struct hc_driver imx21_hc_driver = { .product_desc = "IMX21 USB Host Controller", .hcd_priv_size = sizeof(struct imx21), - .flags = HCD_USB11, + .flags = HCD_DMA | HCD_USB11, .irq = imx21_irq, .reset = imx21_hc_reset, @@ -1836,10 +1836,8 @@ static int imx21_probe(struct platform_device *pdev) if (!res) return -ENODEV; irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq); + if (irq < 0) return irq; - } hcd = usb_create_hcd(&imx21_hc_driver, &pdev->dev, dev_name(&pdev->dev)); diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 74da136d322a..a87c0b26279e 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1581,12 +1581,6 @@ static int isp116x_probe(struct platform_device *pdev) irq = ires->start; irqflags = ires->flags & IRQF_TRIGGER_MASK; - if (pdev->dev.dma_mask) { - DBG("DMA not supported\n"); - ret = -EINVAL; - goto err1; - } - if (!request_mem_region(addr->start, 2, hcd_name)) { ret = -EBUSY; goto err1; diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 28bf8bfb091e..96f8daa11f25 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2645,11 +2645,6 @@ static int isp1362_probe(struct platform_device *pdev) if (pdev->num_resources < 3) return -ENODEV; - if (pdev->dev.dma_mask) { - DBG(1, "won't do DMA"); - return -ENODEV; - } - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq_res) return -ENODEV; diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index afa321ab55fc..8819f502b6a6 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -1800,21 +1800,6 @@ max3421_bus_resume(struct usb_hcd *hcd) return -1; } -/* - * The SPI driver already takes care of DMA-mapping/unmapping, so no - * reason to do it twice. - */ -static int -max3421_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) -{ - return 0; -} - -static void -max3421_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) -{ -} - static const struct hc_driver max3421_hcd_desc = { .description = "max3421", .product_desc = DRIVER_DESC, @@ -1826,8 +1811,6 @@ static const struct hc_driver max3421_hcd_desc = { .get_frame_number = max3421_get_frame_number, .urb_enqueue = max3421_urb_enqueue, .urb_dequeue = max3421_urb_dequeue, - .map_urb_for_dma = max3421_map_urb_for_dma, - .unmap_urb_for_dma = max3421_unmap_urb_for_dma, .endpoint_disable = max3421_endpoint_disable, .hub_status_data = max3421_hub_status_data, .hub_control = max3421_hub_control, diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 905c6317e0c3..d5ce98e205c7 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -32,6 +32,7 @@ struct exynos_ohci_hcd { struct clk *clk; struct device_node *of_node; struct phy *phy[PHY_NUMBER]; + bool legacy_phy; }; static int exynos_ohci_get_phy(struct device *dev, @@ -39,10 +40,22 @@ static int exynos_ohci_get_phy(struct device *dev, { struct device_node *child; struct phy *phy; - int phy_number; + int phy_number, num_phys; int ret; /* Get PHYs for the controller */ + num_phys = of_count_phandle_with_args(dev->of_node, "phys", + "#phy-cells"); + for (phy_number = 0; phy_number < num_phys; phy_number++) { + phy = devm_of_phy_get_by_index(dev, dev->of_node, phy_number); + if (IS_ERR(phy)) + return PTR_ERR(phy); + exynos_ohci->phy[phy_number] = phy; + } + if (num_phys > 0) + return 0; + + /* Get PHYs using legacy bindings */ for_each_available_child_of_node(dev->of_node, child) { ret = of_property_read_u32(child, "reg", &phy_number); if (ret) { @@ -73,6 +86,7 @@ static int exynos_ohci_get_phy(struct device *dev, } } + exynos_ohci->legacy_phy = true; return 0; } @@ -172,11 +186,12 @@ static int exynos_ohci_probe(struct platform_device *pdev) } /* - * Workaround: reset of_node pointer to avoid conflict between Exynos - * OHCI port subnodes and generic USB device bindings + * Workaround: reset of_node pointer to avoid conflict between legacy + * Exynos OHCI port subnodes and generic USB device bindings */ exynos_ohci->of_node = pdev->dev.of_node; - pdev->dev.of_node = NULL; + if (exynos_ohci->legacy_phy) + pdev->dev.of_node = NULL; err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b457fdaff297..4de91653a2c7 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -419,8 +419,7 @@ static void ohci_usb_reset (struct ohci_hcd *ohci) * other cases where the next software may expect clean state from the * "firmware". this is bus-neutral, unlike shutdown() methods. */ -static void -ohci_shutdown (struct usb_hcd *hcd) +static void _ohci_shutdown(struct usb_hcd *hcd) { struct ohci_hcd *ohci; @@ -436,6 +435,16 @@ ohci_shutdown (struct usb_hcd *hcd) ohci->rh_state = OHCI_RH_HALTED; } +static void ohci_shutdown(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + unsigned long flags; + + spin_lock_irqsave(&ohci->lock, flags); + _ohci_shutdown(hcd); + spin_unlock_irqrestore(&ohci->lock, flags); +} + /*-------------------------------------------------------------------------* * HC functions *-------------------------------------------------------------------------*/ @@ -760,7 +769,7 @@ static void io_watchdog_func(struct timer_list *t) died: usb_hc_died(ohci_to_hcd(ohci)); ohci_dump(ohci); - ohci_shutdown(ohci_to_hcd(ohci)); + _ohci_shutdown(ohci_to_hcd(ohci)); goto done; } else { /* No write back because the done queue was empty */ @@ -1178,7 +1187,7 @@ static const struct hc_driver ohci_hc_driver = { * generic hardware linkage */ .irq = ohci_irq, - .flags = HCD_MEMORY | HCD_USB11, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB11, /* * basic lifecycle operations diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index f5f532601092..c561881d0e79 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -29,10 +29,7 @@ #include "ohci.h" -#include <mach/hardware.h> - #define USB_CONFIG_BASE 0x31020000 -#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110) /* USB_OTG_STAT_CONTROL bit defines */ #define TRANSPARENT_I2C_EN (1 << 7) @@ -122,19 +119,33 @@ static inline void isp1301_vbus_off(void) static void ohci_nxp_start_hc(void) { - unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN; + void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4); + unsigned long tmp; + + if (WARN_ON(!usb_otg_stat_control)) + return; + + tmp = __raw_readl(usb_otg_stat_control) | HOST_EN; - __raw_writel(tmp, USB_OTG_STAT_CONTROL); + __raw_writel(tmp, usb_otg_stat_control); isp1301_vbus_on(); + + iounmap(usb_otg_stat_control); } static void ohci_nxp_stop_hc(void) { + void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4); unsigned long tmp; + if (WARN_ON(!usb_otg_stat_control)) + return; + isp1301_vbus_off(); - tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN; - __raw_writel(tmp, USB_OTG_STAT_CONTROL); + tmp = __raw_readl(usb_otg_stat_control) & ~HOST_EN; + __raw_writel(tmp, usb_otg_stat_control); + + iounmap(usb_otg_stat_control); } static int ohci_hcd_nxp_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 65a1c3fdc88c..7addfc2cbadc 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -111,10 +111,8 @@ static int ohci_platform_probe(struct platform_device *dev) return err; irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "no irq provided"); + if (irq < 0) return irq; - } hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, dev_name(&dev->dev)); diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 76a9b40b08f1..45f7cceb6df3 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -50,7 +50,7 @@ static const struct hc_driver ohci_ppc_of_hc_driver = { * generic hardware linkage */ .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, + .flags = HCD_USB11 | HCD_DMA | HCD_MEMORY, /* * basic lifecycle operations diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 395f9d3bc849..f77cd6af0ccf 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -46,7 +46,7 @@ static const struct hc_driver ps3_ohci_hc_driver = { .product_desc = "PS3 OHCI Host Controller", .hcd_priv_size = sizeof(struct ohci_hcd), .irq = ohci_irq, - .flags = HCD_MEMORY | HCD_USB11, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB11, .reset = ps3_ohci_hc_reset, .start = ps3_ohci_hc_start, .stop = ohci_stop, diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 3e2474959735..7679fb583e41 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -148,7 +148,7 @@ static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode) uhcrhda |= RH_A_NPS; break; case PMM_GLOBAL_MODE: - uhcrhda &= ~(RH_A_NPS & RH_A_PSM); + uhcrhda &= ~(RH_A_NPS | RH_A_PSM); break; case PMM_PERPORT_MODE: uhcrhda &= ~(RH_A_NPS); diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index ebec9a7699e3..8e19a5eb5b62 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -84,7 +84,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = { * generic hardware linkage */ .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, + .flags = HCD_USB11 | HCD_DMA | HCD_MEMORY, /* * basic lifecycle operations diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c index 638a92bd2cdc..ac796ccd93ef 100644 --- a/drivers/usb/host/ohci-st.c +++ b/drivers/usb/host/ohci-st.c @@ -138,10 +138,8 @@ static int st_ohci_platform_probe(struct platform_device *dev) return -ENODEV; irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "no irq provided"); + if (irq < 0) return irq; - } res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_mem) { diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index d5a293a707b6..fb6f5e9ae5c6 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -97,10 +97,13 @@ static void tmio_stop_hc(struct platform_device *dev) switch (ohci->num_ports) { default: dev_err(&dev->dev, "Unsupported amount of ports: %d\n", ohci->num_ports); + /* fall through */ case 3: pm |= CCR_PM_USBPW3; + /* fall through */ case 2: pm |= CCR_PM_USBPW2; + /* fall through */ case 1: pm |= CCR_PM_USBPW1; } diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 47c5515a9ce4..e67242e437ed 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -31,10 +31,449 @@ #include <linux/irq.h> #include <linux/platform_device.h> -#include "oxu210hp.h" - #define DRIVER_VERSION "0.0.50" +#define OXU_DEVICEID 0x00 + #define OXU_REV_MASK 0xffff0000 + #define OXU_REV_SHIFT 16 + #define OXU_REV_2100 0x2100 + #define OXU_BO_SHIFT 8 + #define OXU_BO_MASK (0x3 << OXU_BO_SHIFT) + #define OXU_MAJ_REV_SHIFT 4 + #define OXU_MAJ_REV_MASK (0xf << OXU_MAJ_REV_SHIFT) + #define OXU_MIN_REV_SHIFT 0 + #define OXU_MIN_REV_MASK (0xf << OXU_MIN_REV_SHIFT) +#define OXU_HOSTIFCONFIG 0x04 +#define OXU_SOFTRESET 0x08 + #define OXU_SRESET (1 << 0) + +#define OXU_PIOBURSTREADCTRL 0x0C + +#define OXU_CHIPIRQSTATUS 0x10 +#define OXU_CHIPIRQEN_SET 0x14 +#define OXU_CHIPIRQEN_CLR 0x18 + #define OXU_USBSPHLPWUI 0x00000080 + #define OXU_USBOTGLPWUI 0x00000040 + #define OXU_USBSPHI 0x00000002 + #define OXU_USBOTGI 0x00000001 + +#define OXU_CLKCTRL_SET 0x1C + #define OXU_SYSCLKEN 0x00000008 + #define OXU_USBSPHCLKEN 0x00000002 + #define OXU_USBOTGCLKEN 0x00000001 + +#define OXU_ASO 0x68 + #define OXU_SPHPOEN 0x00000100 + #define OXU_OVRCCURPUPDEN 0x00000800 + #define OXU_ASO_OP (1 << 10) + #define OXU_COMPARATOR 0x000004000 + +#define OXU_USBMODE 0x1A8 + #define OXU_VBPS 0x00000020 + #define OXU_ES_LITTLE 0x00000000 + #define OXU_CM_HOST_ONLY 0x00000003 + +/* + * Proper EHCI structs & defines + */ + +/* Magic numbers that can affect system performance */ +#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ +#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ +#define EHCI_TUNE_RL_TT 0 +#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ +#define EHCI_TUNE_MULT_TT 1 +#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ + +struct oxu_hcd; + +/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ + +/* Section 2.2 Host Controller Capability Registers */ +struct ehci_caps { + /* these fields are specified as 8 and 16 bit registers, + * but some hosts can't perform 8 or 16 bit PCI accesses. + */ + u32 hc_capbase; +#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ +#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ + u32 hcs_params; /* HCSPARAMS - offset 0x4 */ +#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ +#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ +#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ +#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ +#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ +#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ +#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ + + u32 hcc_params; /* HCCPARAMS - offset 0x8 */ +#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ +#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ +#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ +#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ +#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ +#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ + u8 portroute[8]; /* nibbles for routing - offset 0xC */ +} __packed; + + +/* Section 2.3 Host Controller Operational Registers */ +struct ehci_regs { + /* USBCMD: offset 0x00 */ + u32 command; +/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ +#define CMD_PARK (1<<11) /* enable "park" on async qh */ +#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ +#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ +#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ +#define CMD_ASE (1<<5) /* async schedule enable */ +#define CMD_PSE (1<<4) /* periodic schedule enable */ +/* 3:2 is periodic frame list size */ +#define CMD_RESET (1<<1) /* reset HC not bus */ +#define CMD_RUN (1<<0) /* start/stop HC */ + + /* USBSTS: offset 0x04 */ + u32 status; +#define STS_ASS (1<<15) /* Async Schedule Status */ +#define STS_PSS (1<<14) /* Periodic Schedule Status */ +#define STS_RECL (1<<13) /* Reclamation */ +#define STS_HALT (1<<12) /* Not running (any reason) */ +/* some bits reserved */ + /* these STS_* flags are also intr_enable bits (USBINTR) */ +#define STS_IAA (1<<5) /* Interrupted on async advance */ +#define STS_FATAL (1<<4) /* such as some PCI access errors */ +#define STS_FLR (1<<3) /* frame list rolled over */ +#define STS_PCD (1<<2) /* port change detect */ +#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ +#define STS_INT (1<<0) /* "normal" completion (short, ...) */ + +#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) + + /* USBINTR: offset 0x08 */ + u32 intr_enable; + + /* FRINDEX: offset 0x0C */ + u32 frame_index; /* current microframe number */ + /* CTRLDSSEGMENT: offset 0x10 */ + u32 segment; /* address bits 63:32 if needed */ + /* PERIODICLISTBASE: offset 0x14 */ + u32 frame_list; /* points to periodic list */ + /* ASYNCLISTADDR: offset 0x18 */ + u32 async_next; /* address of next async queue head */ + + u32 reserved[9]; + + /* CONFIGFLAG: offset 0x40 */ + u32 configured_flag; +#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ + + /* PORTSC: offset 0x44 */ + u32 port_status[0]; /* up to N_PORTS */ +/* 31:23 reserved */ +#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ +#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ +#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ +/* 19:16 for port testing */ +#define PORT_LED_OFF (0<<14) +#define PORT_LED_AMBER (1<<14) +#define PORT_LED_GREEN (2<<14) +#define PORT_LED_MASK (3<<14) +#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ +#define PORT_POWER (1<<12) /* true: has power (see PPC) */ +#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ +/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ +/* 9 reserved */ +#define PORT_RESET (1<<8) /* reset port */ +#define PORT_SUSPEND (1<<7) /* suspend port */ +#define PORT_RESUME (1<<6) /* resume it */ +#define PORT_OCC (1<<5) /* over current change */ +#define PORT_OC (1<<4) /* over current active */ +#define PORT_PEC (1<<3) /* port enable change */ +#define PORT_PE (1<<2) /* port enable */ +#define PORT_CSC (1<<1) /* connect status change */ +#define PORT_CONNECT (1<<0) /* device connected */ +#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) +} __packed; + +/* Appendix C, Debug port ... intended for use with special "debug devices" + * that can help if there's no serial console. (nonstandard enumeration.) + */ +struct ehci_dbg_port { + u32 control; +#define DBGP_OWNER (1<<30) +#define DBGP_ENABLED (1<<28) +#define DBGP_DONE (1<<16) +#define DBGP_INUSE (1<<10) +#define DBGP_ERRCODE(x) (((x)>>7)&0x07) +# define DBGP_ERR_BAD 1 +# define DBGP_ERR_SIGNAL 2 +#define DBGP_ERROR (1<<6) +#define DBGP_GO (1<<5) +#define DBGP_OUT (1<<4) +#define DBGP_LEN(x) (((x)>>0)&0x0f) + u32 pids; +#define DBGP_PID_GET(x) (((x)>>16)&0xff) +#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) + u32 data03; + u32 data47; + u32 address; +#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) +} __packed; + +#define QTD_NEXT(dma) cpu_to_le32((u32)dma) + +/* + * EHCI Specification 0.95 Section 3.5 + * QTD: describe data transfer components (buffer, direction, ...) + * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram". + * + * These are associated only with "QH" (Queue Head) structures, + * used with control, bulk, and interrupt transfers. + */ +struct ehci_qtd { + /* first part defined by EHCI spec */ + __le32 hw_next; /* see EHCI 3.5.1 */ + __le32 hw_alt_next; /* see EHCI 3.5.2 */ + __le32 hw_token; /* see EHCI 3.5.3 */ +#define QTD_TOGGLE (1 << 31) /* data toggle */ +#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff) +#define QTD_IOC (1 << 15) /* interrupt on complete */ +#define QTD_CERR(tok) (((tok)>>10) & 0x3) +#define QTD_PID(tok) (((tok)>>8) & 0x3) +#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */ +#define QTD_STS_HALT (1 << 6) /* halted on error */ +#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */ +#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */ +#define QTD_STS_XACT (1 << 3) /* device gave illegal response */ +#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */ +#define QTD_STS_STS (1 << 1) /* split transaction state */ +#define QTD_STS_PING (1 << 0) /* issue PING? */ + __le32 hw_buf[5]; /* see EHCI 3.5.4 */ + __le32 hw_buf_hi[5]; /* Appendix B */ + + /* the rest is HCD-private */ + dma_addr_t qtd_dma; /* qtd address */ + struct list_head qtd_list; /* sw qtd list */ + struct urb *urb; /* qtd's urb */ + size_t length; /* length of buffer */ + + u32 qtd_buffer_len; + void *buffer; + dma_addr_t buffer_dma; + void *transfer_buffer; + void *transfer_dma; +} __aligned(32); + +/* mask NakCnt+T in qh->hw_alt_next */ +#define QTD_MASK cpu_to_le32 (~0x1f) + +#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1) + +/* Type tag from {qh, itd, sitd, fstn}->hw_next */ +#define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1)) + +/* values for that type tag */ +#define Q_TYPE_QH cpu_to_le32 (1 << 1) + +/* next async queue entry, or pointer to interrupt/periodic QH */ +#define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH) + +/* for periodic/async schedules and qtd lists, mark end of list */ +#define EHCI_LIST_END cpu_to_le32(1) /* "null pointer" to hw */ + +/* + * Entries in periodic shadow table are pointers to one of four kinds + * of data structure. That's dictated by the hardware; a type tag is + * encoded in the low bits of the hardware's periodic schedule. Use + * Q_NEXT_TYPE to get the tag. + * + * For entries in the async schedule, the type tag always says "qh". + */ +union ehci_shadow { + struct ehci_qh *qh; /* Q_TYPE_QH */ + __le32 *hw_next; /* (all types) */ + void *ptr; +}; + +/* + * EHCI Specification 0.95 Section 3.6 + * QH: describes control/bulk/interrupt endpoints + * See Fig 3-7 "Queue Head Structure Layout". + * + * These appear in both the async and (for interrupt) periodic schedules. + */ + +struct ehci_qh { + /* first part defined by EHCI spec */ + __le32 hw_next; /* see EHCI 3.6.1 */ + __le32 hw_info1; /* see EHCI 3.6.2 */ +#define QH_HEAD 0x00008000 + __le32 hw_info2; /* see EHCI 3.6.2 */ +#define QH_SMASK 0x000000ff +#define QH_CMASK 0x0000ff00 +#define QH_HUBADDR 0x007f0000 +#define QH_HUBPORT 0x3f800000 +#define QH_MULT 0xc0000000 + __le32 hw_current; /* qtd list - see EHCI 3.6.4 */ + + /* qtd overlay (hardware parts of a struct ehci_qtd) */ + __le32 hw_qtd_next; + __le32 hw_alt_next; + __le32 hw_token; + __le32 hw_buf[5]; + __le32 hw_buf_hi[5]; + + /* the rest is HCD-private */ + dma_addr_t qh_dma; /* address of qh */ + union ehci_shadow qh_next; /* ptr to qh; or periodic */ + struct list_head qtd_list; /* sw qtd list */ + struct ehci_qtd *dummy; + struct ehci_qh *reclaim; /* next to reclaim */ + + struct oxu_hcd *oxu; + struct kref kref; + unsigned int stamp; + + u8 qh_state; +#define QH_STATE_LINKED 1 /* HC sees this */ +#define QH_STATE_UNLINK 2 /* HC may still see this */ +#define QH_STATE_IDLE 3 /* HC doesn't see this */ +#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */ +#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */ + + /* periodic schedule info */ + u8 usecs; /* intr bandwidth */ + u8 gap_uf; /* uframes split/csplit gap */ + u8 c_usecs; /* ... split completion bw */ + u16 tt_usecs; /* tt downstream bandwidth */ + unsigned short period; /* polling interval */ + unsigned short start; /* where polling starts */ +#define NO_FRAME ((unsigned short)~0) /* pick new start */ + struct usb_device *dev; /* access to TT */ +} __aligned(32); + +/* + * Proper OXU210HP structs + */ + +#define OXU_OTG_CORE_OFFSET 0x00400 +#define OXU_OTG_CAP_OFFSET (OXU_OTG_CORE_OFFSET + 0x100) +#define OXU_SPH_CORE_OFFSET 0x00800 +#define OXU_SPH_CAP_OFFSET (OXU_SPH_CORE_OFFSET + 0x100) + +#define OXU_OTG_MEM 0xE000 +#define OXU_SPH_MEM 0x16000 + +/* Only how many elements & element structure are specifies here. */ +/* 2 host controllers are enabled - total size <= 28 kbytes */ +#define DEFAULT_I_TDPS 1024 +#define QHEAD_NUM 16 +#define QTD_NUM 32 +#define SITD_NUM 8 +#define MURB_NUM 8 + +#define BUFFER_NUM 8 +#define BUFFER_SIZE 512 + +struct oxu_info { + struct usb_hcd *hcd[2]; +}; + +struct oxu_buf { + u8 buffer[BUFFER_SIZE]; +} __aligned(BUFFER_SIZE); + +struct oxu_onchip_mem { + struct oxu_buf db_pool[BUFFER_NUM]; + + u32 frame_list[DEFAULT_I_TDPS]; + struct ehci_qh qh_pool[QHEAD_NUM]; + struct ehci_qtd qtd_pool[QTD_NUM]; +} __aligned(4 << 10); + +#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */ + +struct oxu_murb { + struct urb urb; + struct urb *main; + u8 last; +}; + +struct oxu_hcd { /* one per controller */ + unsigned int is_otg:1; + + u8 qh_used[QHEAD_NUM]; + u8 qtd_used[QTD_NUM]; + u8 db_used[BUFFER_NUM]; + u8 murb_used[MURB_NUM]; + + struct oxu_onchip_mem __iomem *mem; + spinlock_t mem_lock; + + struct timer_list urb_timer; + + struct ehci_caps __iomem *caps; + struct ehci_regs __iomem *regs; + + u32 hcs_params; /* cached register copy */ + spinlock_t lock; + + /* async schedule support */ + struct ehci_qh *async; + struct ehci_qh *reclaim; + unsigned int reclaim_ready:1; + unsigned int scanning:1; + + /* periodic schedule support */ + unsigned int periodic_size; + __le32 *periodic; /* hw periodic table */ + dma_addr_t periodic_dma; + unsigned int i_thresh; /* uframes HC might cache */ + + union ehci_shadow *pshadow; /* mirror hw periodic table */ + int next_uframe; /* scan periodic, start here */ + unsigned int periodic_sched; /* periodic activity count */ + + /* per root hub port */ + unsigned long reset_done[EHCI_MAX_ROOT_PORTS]; + /* bit vectors (one bit per port) */ + unsigned long bus_suspended; /* which ports were + * already suspended at the + * start of a bus suspend + */ + unsigned long companion_ports;/* which ports are dedicated + * to the companion controller + */ + + struct timer_list watchdog; + unsigned long actions; + unsigned int stamp; + unsigned long next_statechange; + u32 command; + + /* SILICON QUIRKS */ + struct list_head urb_list; /* this is the head to urb + * queue that didn't get enough + * resources + */ + struct oxu_murb *murb_pool; /* murb per split big urb */ + unsigned int urb_len; + + u8 sbrn; /* packed release number */ +}; + +#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */ +#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ +#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ +#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ + +enum ehci_timer_action { + TIMER_IO_WATCHDOG, + TIMER_IAA_WATCHDOG, + TIMER_ASYNC_SHRINK, + TIMER_ASYNC_OFF, +}; + /* * Main defines */ @@ -2649,9 +3088,6 @@ static int oxu_reset(struct usb_hcd *hcd) INIT_LIST_HEAD(&oxu->urb_list); oxu->urb_len = 0; - /* FIMXE */ - hcd->self.controller->dma_mask = NULL; - if (oxu->is_otg) { oxu->caps = hcd->regs + OXU_OTG_CAP_OFFSET; oxu->regs = hcd->regs + OXU_OTG_CAP_OFFSET + \ diff --git a/drivers/usb/host/oxu210hp.h b/drivers/usb/host/oxu210hp.h deleted file mode 100644 index 437044147862..000000000000 --- a/drivers/usb/host/oxu210hp.h +++ /dev/null @@ -1,448 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Host interface registers - */ - -#define OXU_DEVICEID 0x00 - #define OXU_REV_MASK 0xffff0000 - #define OXU_REV_SHIFT 16 - #define OXU_REV_2100 0x2100 - #define OXU_BO_SHIFT 8 - #define OXU_BO_MASK (0x3 << OXU_BO_SHIFT) - #define OXU_MAJ_REV_SHIFT 4 - #define OXU_MAJ_REV_MASK (0xf << OXU_MAJ_REV_SHIFT) - #define OXU_MIN_REV_SHIFT 0 - #define OXU_MIN_REV_MASK (0xf << OXU_MIN_REV_SHIFT) -#define OXU_HOSTIFCONFIG 0x04 -#define OXU_SOFTRESET 0x08 - #define OXU_SRESET (1 << 0) - -#define OXU_PIOBURSTREADCTRL 0x0C - -#define OXU_CHIPIRQSTATUS 0x10 -#define OXU_CHIPIRQEN_SET 0x14 -#define OXU_CHIPIRQEN_CLR 0x18 - #define OXU_USBSPHLPWUI 0x00000080 - #define OXU_USBOTGLPWUI 0x00000040 - #define OXU_USBSPHI 0x00000002 - #define OXU_USBOTGI 0x00000001 - -#define OXU_CLKCTRL_SET 0x1C - #define OXU_SYSCLKEN 0x00000008 - #define OXU_USBSPHCLKEN 0x00000002 - #define OXU_USBOTGCLKEN 0x00000001 - -#define OXU_ASO 0x68 - #define OXU_SPHPOEN 0x00000100 - #define OXU_OVRCCURPUPDEN 0x00000800 - #define OXU_ASO_OP (1 << 10) - #define OXU_COMPARATOR 0x000004000 - -#define OXU_USBMODE 0x1A8 - #define OXU_VBPS 0x00000020 - #define OXU_ES_LITTLE 0x00000000 - #define OXU_CM_HOST_ONLY 0x00000003 - -/* - * Proper EHCI structs & defines - */ - -/* Magic numbers that can affect system performance */ -#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ -#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ -#define EHCI_TUNE_RL_TT 0 -#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ -#define EHCI_TUNE_MULT_TT 1 -#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ - -struct oxu_hcd; - -/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ - -/* Section 2.2 Host Controller Capability Registers */ -struct ehci_caps { - /* these fields are specified as 8 and 16 bit registers, - * but some hosts can't perform 8 or 16 bit PCI accesses. - */ - u32 hc_capbase; -#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ -#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ - u32 hcs_params; /* HCSPARAMS - offset 0x4 */ -#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ -#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ -#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ -#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ -#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ -#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ -#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ - - u32 hcc_params; /* HCCPARAMS - offset 0x8 */ -#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ -#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ -#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ -#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ -#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ -#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ - u8 portroute[8]; /* nibbles for routing - offset 0xC */ -} __attribute__ ((packed)); - - -/* Section 2.3 Host Controller Operational Registers */ -struct ehci_regs { - /* USBCMD: offset 0x00 */ - u32 command; -/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ -#define CMD_PARK (1<<11) /* enable "park" on async qh */ -#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ -#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ -#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ -#define CMD_ASE (1<<5) /* async schedule enable */ -#define CMD_PSE (1<<4) /* periodic schedule enable */ -/* 3:2 is periodic frame list size */ -#define CMD_RESET (1<<1) /* reset HC not bus */ -#define CMD_RUN (1<<0) /* start/stop HC */ - - /* USBSTS: offset 0x04 */ - u32 status; -#define STS_ASS (1<<15) /* Async Schedule Status */ -#define STS_PSS (1<<14) /* Periodic Schedule Status */ -#define STS_RECL (1<<13) /* Reclamation */ -#define STS_HALT (1<<12) /* Not running (any reason) */ -/* some bits reserved */ - /* these STS_* flags are also intr_enable bits (USBINTR) */ -#define STS_IAA (1<<5) /* Interrupted on async advance */ -#define STS_FATAL (1<<4) /* such as some PCI access errors */ -#define STS_FLR (1<<3) /* frame list rolled over */ -#define STS_PCD (1<<2) /* port change detect */ -#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ -#define STS_INT (1<<0) /* "normal" completion (short, ...) */ - -#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) - - /* USBINTR: offset 0x08 */ - u32 intr_enable; - - /* FRINDEX: offset 0x0C */ - u32 frame_index; /* current microframe number */ - /* CTRLDSSEGMENT: offset 0x10 */ - u32 segment; /* address bits 63:32 if needed */ - /* PERIODICLISTBASE: offset 0x14 */ - u32 frame_list; /* points to periodic list */ - /* ASYNCLISTADDR: offset 0x18 */ - u32 async_next; /* address of next async queue head */ - - u32 reserved[9]; - - /* CONFIGFLAG: offset 0x40 */ - u32 configured_flag; -#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ - - /* PORTSC: offset 0x44 */ - u32 port_status[0]; /* up to N_PORTS */ -/* 31:23 reserved */ -#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ -#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ -#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ -/* 19:16 for port testing */ -#define PORT_LED_OFF (0<<14) -#define PORT_LED_AMBER (1<<14) -#define PORT_LED_GREEN (2<<14) -#define PORT_LED_MASK (3<<14) -#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ -#define PORT_POWER (1<<12) /* true: has power (see PPC) */ -#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ -/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ -/* 9 reserved */ -#define PORT_RESET (1<<8) /* reset port */ -#define PORT_SUSPEND (1<<7) /* suspend port */ -#define PORT_RESUME (1<<6) /* resume it */ -#define PORT_OCC (1<<5) /* over current change */ -#define PORT_OC (1<<4) /* over current active */ -#define PORT_PEC (1<<3) /* port enable change */ -#define PORT_PE (1<<2) /* port enable */ -#define PORT_CSC (1<<1) /* connect status change */ -#define PORT_CONNECT (1<<0) /* device connected */ -#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -} __attribute__ ((packed)); - -/* Appendix C, Debug port ... intended for use with special "debug devices" - * that can help if there's no serial console. (nonstandard enumeration.) - */ -struct ehci_dbg_port { - u32 control; -#define DBGP_OWNER (1<<30) -#define DBGP_ENABLED (1<<28) -#define DBGP_DONE (1<<16) -#define DBGP_INUSE (1<<10) -#define DBGP_ERRCODE(x) (((x)>>7)&0x07) -# define DBGP_ERR_BAD 1 -# define DBGP_ERR_SIGNAL 2 -#define DBGP_ERROR (1<<6) -#define DBGP_GO (1<<5) -#define DBGP_OUT (1<<4) -#define DBGP_LEN(x) (((x)>>0)&0x0f) - u32 pids; -#define DBGP_PID_GET(x) (((x)>>16)&0xff) -#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) - u32 data03; - u32 data47; - u32 address; -#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) -} __attribute__ ((packed)); - - -#define QTD_NEXT(dma) cpu_to_le32((u32)dma) - -/* - * EHCI Specification 0.95 Section 3.5 - * QTD: describe data transfer components (buffer, direction, ...) - * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram". - * - * These are associated only with "QH" (Queue Head) structures, - * used with control, bulk, and interrupt transfers. - */ -struct ehci_qtd { - /* first part defined by EHCI spec */ - __le32 hw_next; /* see EHCI 3.5.1 */ - __le32 hw_alt_next; /* see EHCI 3.5.2 */ - __le32 hw_token; /* see EHCI 3.5.3 */ -#define QTD_TOGGLE (1 << 31) /* data toggle */ -#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff) -#define QTD_IOC (1 << 15) /* interrupt on complete */ -#define QTD_CERR(tok) (((tok)>>10) & 0x3) -#define QTD_PID(tok) (((tok)>>8) & 0x3) -#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */ -#define QTD_STS_HALT (1 << 6) /* halted on error */ -#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */ -#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */ -#define QTD_STS_XACT (1 << 3) /* device gave illegal response */ -#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */ -#define QTD_STS_STS (1 << 1) /* split transaction state */ -#define QTD_STS_PING (1 << 0) /* issue PING? */ - __le32 hw_buf[5]; /* see EHCI 3.5.4 */ - __le32 hw_buf_hi[5]; /* Appendix B */ - - /* the rest is HCD-private */ - dma_addr_t qtd_dma; /* qtd address */ - struct list_head qtd_list; /* sw qtd list */ - struct urb *urb; /* qtd's urb */ - size_t length; /* length of buffer */ - - u32 qtd_buffer_len; - void *buffer; - dma_addr_t buffer_dma; - void *transfer_buffer; - void *transfer_dma; -} __attribute__ ((aligned(32))); - -/* mask NakCnt+T in qh->hw_alt_next */ -#define QTD_MASK cpu_to_le32 (~0x1f) - -#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1) - -/* Type tag from {qh, itd, sitd, fstn}->hw_next */ -#define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1)) - -/* values for that type tag */ -#define Q_TYPE_QH cpu_to_le32 (1 << 1) - -/* next async queue entry, or pointer to interrupt/periodic QH */ -#define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH) - -/* for periodic/async schedules and qtd lists, mark end of list */ -#define EHCI_LIST_END cpu_to_le32(1) /* "null pointer" to hw */ - -/* - * Entries in periodic shadow table are pointers to one of four kinds - * of data structure. That's dictated by the hardware; a type tag is - * encoded in the low bits of the hardware's periodic schedule. Use - * Q_NEXT_TYPE to get the tag. - * - * For entries in the async schedule, the type tag always says "qh". - */ -union ehci_shadow { - struct ehci_qh *qh; /* Q_TYPE_QH */ - __le32 *hw_next; /* (all types) */ - void *ptr; -}; - -/* - * EHCI Specification 0.95 Section 3.6 - * QH: describes control/bulk/interrupt endpoints - * See Fig 3-7 "Queue Head Structure Layout". - * - * These appear in both the async and (for interrupt) periodic schedules. - */ - -struct ehci_qh { - /* first part defined by EHCI spec */ - __le32 hw_next; /* see EHCI 3.6.1 */ - __le32 hw_info1; /* see EHCI 3.6.2 */ -#define QH_HEAD 0x00008000 - __le32 hw_info2; /* see EHCI 3.6.2 */ -#define QH_SMASK 0x000000ff -#define QH_CMASK 0x0000ff00 -#define QH_HUBADDR 0x007f0000 -#define QH_HUBPORT 0x3f800000 -#define QH_MULT 0xc0000000 - __le32 hw_current; /* qtd list - see EHCI 3.6.4 */ - - /* qtd overlay (hardware parts of a struct ehci_qtd) */ - __le32 hw_qtd_next; - __le32 hw_alt_next; - __le32 hw_token; - __le32 hw_buf[5]; - __le32 hw_buf_hi[5]; - - /* the rest is HCD-private */ - dma_addr_t qh_dma; /* address of qh */ - union ehci_shadow qh_next; /* ptr to qh; or periodic */ - struct list_head qtd_list; /* sw qtd list */ - struct ehci_qtd *dummy; - struct ehci_qh *reclaim; /* next to reclaim */ - - struct oxu_hcd *oxu; - struct kref kref; - unsigned stamp; - - u8 qh_state; -#define QH_STATE_LINKED 1 /* HC sees this */ -#define QH_STATE_UNLINK 2 /* HC may still see this */ -#define QH_STATE_IDLE 3 /* HC doesn't see this */ -#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */ -#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */ - - /* periodic schedule info */ - u8 usecs; /* intr bandwidth */ - u8 gap_uf; /* uframes split/csplit gap */ - u8 c_usecs; /* ... split completion bw */ - u16 tt_usecs; /* tt downstream bandwidth */ - unsigned short period; /* polling interval */ - unsigned short start; /* where polling starts */ -#define NO_FRAME ((unsigned short)~0) /* pick new start */ - struct usb_device *dev; /* access to TT */ -} __attribute__ ((aligned(32))); - -/* - * Proper OXU210HP structs - */ - -#define OXU_OTG_CORE_OFFSET 0x00400 -#define OXU_OTG_CAP_OFFSET (OXU_OTG_CORE_OFFSET + 0x100) -#define OXU_SPH_CORE_OFFSET 0x00800 -#define OXU_SPH_CAP_OFFSET (OXU_SPH_CORE_OFFSET + 0x100) - -#define OXU_OTG_MEM 0xE000 -#define OXU_SPH_MEM 0x16000 - -/* Only how many elements & element structure are specifies here. */ -/* 2 host controllers are enabled - total size <= 28 kbytes */ -#define DEFAULT_I_TDPS 1024 -#define QHEAD_NUM 16 -#define QTD_NUM 32 -#define SITD_NUM 8 -#define MURB_NUM 8 - -#define BUFFER_NUM 8 -#define BUFFER_SIZE 512 - -struct oxu_info { - struct usb_hcd *hcd[2]; -}; - -struct oxu_buf { - u8 buffer[BUFFER_SIZE]; -} __attribute__ ((aligned(BUFFER_SIZE))); - -struct oxu_onchip_mem { - struct oxu_buf db_pool[BUFFER_NUM]; - - u32 frame_list[DEFAULT_I_TDPS]; - struct ehci_qh qh_pool[QHEAD_NUM]; - struct ehci_qtd qtd_pool[QTD_NUM]; -} __attribute__ ((aligned(4 << 10))); - -#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */ - -struct oxu_murb { - struct urb urb; - struct urb *main; - u8 last; -}; - -struct oxu_hcd { /* one per controller */ - unsigned int is_otg:1; - - u8 qh_used[QHEAD_NUM]; - u8 qtd_used[QTD_NUM]; - u8 db_used[BUFFER_NUM]; - u8 murb_used[MURB_NUM]; - - struct oxu_onchip_mem __iomem *mem; - spinlock_t mem_lock; - - struct timer_list urb_timer; - - struct ehci_caps __iomem *caps; - struct ehci_regs __iomem *regs; - - __u32 hcs_params; /* cached register copy */ - spinlock_t lock; - - /* async schedule support */ - struct ehci_qh *async; - struct ehci_qh *reclaim; - unsigned reclaim_ready:1; - unsigned scanning:1; - - /* periodic schedule support */ - unsigned periodic_size; - __le32 *periodic; /* hw periodic table */ - dma_addr_t periodic_dma; - unsigned i_thresh; /* uframes HC might cache */ - - union ehci_shadow *pshadow; /* mirror hw periodic table */ - int next_uframe; /* scan periodic, start here */ - unsigned periodic_sched; /* periodic activity count */ - - /* per root hub port */ - unsigned long reset_done[EHCI_MAX_ROOT_PORTS]; - /* bit vectors (one bit per port) */ - unsigned long bus_suspended; /* which ports were - * already suspended at the - * start of a bus suspend - */ - unsigned long companion_ports;/* which ports are dedicated - * to the companion controller - */ - - struct timer_list watchdog; - unsigned long actions; - unsigned stamp; - unsigned long next_statechange; - u32 command; - - /* SILICON QUIRKS */ - struct list_head urb_list; /* this is the head to urb - * queue that didn't get enough - * resources - */ - struct oxu_murb *murb_pool; /* murb per split big urb */ - unsigned urb_len; - - u8 sbrn; /* packed release number */ -}; - -#define EHCI_IAA_JIFFIES (HZ/100) /* arbitrary; ~10 msec */ -#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ -#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ -#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ - -enum ehci_timer_action { - TIMER_IO_WATCHDOG, - TIMER_IAA_WATCHDOG, - TIMER_ASYNC_SHRINK, - TIMER_ASYNC_OFF, -}; - -#include <linux/oxu210hp.h> diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 42668aeca57c..0c03ac6b0213 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2411,12 +2411,6 @@ static int r8a66597_probe(struct platform_device *pdev) if (usb_disabled()) return -ENODEV; - if (pdev->dev.dma_mask) { - ret = -EINVAL; - dev_err(&pdev->dev, "dma not supported\n"); - goto clean_up; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { ret = -ENODEV; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 5b061e599948..72a34a1eb618 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1632,12 +1632,6 @@ sl811h_probe(struct platform_device *dev) irq = ires->start; irqflags = ires->flags & IRQF_TRIGGER_MASK; - /* refuse to confuse usbcore */ - if (dev->dev.dma_mask) { - dev_dbg(&dev->dev, "no we won't dma\n"); - return -EINVAL; - } - /* the chip may be wired for either kind of addressing */ addr = platform_get_resource(dev, IORESOURCE_MEM, 0); data = platform_get_resource(dev, IORESOURCE_MEM, 1); diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 400c40bc43a6..4efee34f154f 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -3077,8 +3077,6 @@ static int u132_probe(struct platform_device *pdev) retval = ftdi_read_pcimem(pdev, roothub.a, &rh_a); if (retval) return retval; - if (pdev->dev.dma_mask) - return -EINVAL; hcd = usb_create_hcd(&u132_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { diff --git a/drivers/usb/host/uhci-grlib.c b/drivers/usb/host/uhci-grlib.c index 2103b1ed0f8f..0a201a73b196 100644 --- a/drivers/usb/host/uhci-grlib.c +++ b/drivers/usb/host/uhci-grlib.c @@ -63,7 +63,7 @@ static const struct hc_driver uhci_grlib_hc_driver = { /* Generic hardware linkage */ .irq = uhci_irq, - .flags = HCD_MEMORY | HCD_USB11, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB11, /* Basic lifecycle operations */ .reset = uhci_grlib_init, diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c index 0dd944277c99..0fa3d72bae26 100644 --- a/drivers/usb/host/uhci-pci.c +++ b/drivers/usb/host/uhci-pci.c @@ -261,7 +261,7 @@ static const struct hc_driver uhci_driver = { /* Generic hardware linkage */ .irq = uhci_irq, - .flags = HCD_USB11, + .flags = HCD_DMA | HCD_USB11, /* Basic lifecycle operations */ .reset = uhci_pci_init, diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index 89700e26fb29..70dbd95c3f06 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -41,7 +41,7 @@ static const struct hc_driver uhci_platform_hc_driver = { /* Generic hardware linkage */ .irq = uhci_irq, - .flags = HCD_MEMORY | HCD_USB11, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB11, /* Basic lifecycle operations */ .reset = uhci_platform_init, diff --git a/drivers/usb/host/whci/Makefile b/drivers/usb/host/whci/Makefile deleted file mode 100644 index 859d20079df6..000000000000 --- a/drivers/usb/host/whci/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o - -whci-hcd-y := \ - asl.o \ - debug.o \ - hcd.o \ - hw.o \ - init.o \ - int.o \ - pzl.o \ - qset.o \ - wusb.o diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c deleted file mode 100644 index 276fb34c8efd..000000000000 --- a/drivers/usb/host/whci/asl.c +++ /dev/null @@ -1,376 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) asynchronous schedule management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> -#include <linux/uwb/umc.h> -#include <linux/usb.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -static void qset_get_next_prev(struct whc *whc, struct whc_qset *qset, - struct whc_qset **next, struct whc_qset **prev) -{ - struct list_head *n, *p; - - BUG_ON(list_empty(&whc->async_list)); - - n = qset->list_node.next; - if (n == &whc->async_list) - n = n->next; - p = qset->list_node.prev; - if (p == &whc->async_list) - p = p->prev; - - *next = container_of(n, struct whc_qset, list_node); - *prev = container_of(p, struct whc_qset, list_node); - -} - -static void asl_qset_insert_begin(struct whc *whc, struct whc_qset *qset) -{ - list_move(&qset->list_node, &whc->async_list); - qset->in_sw_list = true; -} - -static void asl_qset_insert(struct whc *whc, struct whc_qset *qset) -{ - struct whc_qset *next, *prev; - - qset_clear(whc, qset); - - /* Link into ASL. */ - qset_get_next_prev(whc, qset, &next, &prev); - whc_qset_set_link_ptr(&qset->qh.link, next->qset_dma); - whc_qset_set_link_ptr(&prev->qh.link, qset->qset_dma); - qset->in_hw_list = true; -} - -static void asl_qset_remove(struct whc *whc, struct whc_qset *qset) -{ - struct whc_qset *prev, *next; - - qset_get_next_prev(whc, qset, &next, &prev); - - list_move(&qset->list_node, &whc->async_removed_list); - qset->in_sw_list = false; - - /* - * No more qsets in the ASL? The caller must stop the ASL as - * it's no longer valid. - */ - if (list_empty(&whc->async_list)) - return; - - /* Remove from ASL. */ - whc_qset_set_link_ptr(&prev->qh.link, next->qset_dma); - qset->in_hw_list = false; -} - -/** - * process_qset - process any recently inactivated or halted qTDs in a - * qset. - * - * After inactive qTDs are removed, new qTDs can be added if the - * urb queue still contains URBs. - * - * Returns any additional WUSBCMD bits for the ASL sync command (i.e., - * WUSBCMD_ASYNC_QSET_RM if a halted qset was removed). - */ -static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) -{ - enum whc_update update = 0; - uint32_t status = 0; - - while (qset->ntds) { - struct whc_qtd *td; - - td = &qset->qtd[qset->td_start]; - status = le32_to_cpu(td->status); - - /* - * Nothing to do with a still active qTD. - */ - if (status & QTD_STS_ACTIVE) - break; - - if (status & QTD_STS_HALTED) { - /* Ug, an error. */ - process_halted_qtd(whc, qset, td); - /* A halted qTD always triggers an update - because the qset was either removed or - reactivated. */ - update |= WHC_UPDATE_UPDATED; - goto done; - } - - /* Mmm, a completed qTD. */ - process_inactive_qtd(whc, qset, td); - } - - if (!qset->remove) - update |= qset_add_qtds(whc, qset); - -done: - /* - * Remove this qset from the ASL if requested, but only if has - * no qTDs. - */ - if (qset->remove && qset->ntds == 0) { - asl_qset_remove(whc, qset); - update |= WHC_UPDATE_REMOVED; - } - return update; -} - -void asl_start(struct whc *whc) -{ - struct whc_qset *qset; - - qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); - - le_writeq(qset->qset_dma | QH_LINK_NTDS(8), whc->base + WUSBASYNCLISTADDR); - - whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, WUSBCMD_ASYNC_EN); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_ASYNC_SCHED, WUSBSTS_ASYNC_SCHED, - 1000, "start ASL"); -} - -void asl_stop(struct whc *whc) -{ - whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, 0); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_ASYNC_SCHED, 0, - 1000, "stop ASL"); -} - -/** - * asl_update - request an ASL update and wait for the hardware to be synced - * @whc: the WHCI HC - * @wusbcmd: WUSBCMD value to start the update. - * - * If the WUSB HC is inactive (i.e., the ASL is stopped) then the - * update must be skipped as the hardware may not respond to update - * requests. - */ -void asl_update(struct whc *whc, uint32_t wusbcmd) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - long t; - - mutex_lock(&wusbhc->mutex); - if (wusbhc->active) { - whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - t = wait_event_timeout( - whc->async_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0, - msecs_to_jiffies(1000)); - if (t == 0) - whc_hw_error(whc, "ASL update timeout"); - } - mutex_unlock(&wusbhc->mutex); -} - -/** - * scan_async_work - scan the ASL for qsets to process. - * - * Process each qset in the ASL in turn and then signal the WHC that - * the ASL has been updated. - * - * Then start, stop or update the asynchronous schedule as required. - */ -void scan_async_work(struct work_struct *work) -{ - struct whc *whc = container_of(work, struct whc, async_work); - struct whc_qset *qset, *t; - enum whc_update update = 0; - - spin_lock_irq(&whc->lock); - - /* - * Transerve the software list backwards so new qsets can be - * safely inserted into the ASL without making it non-circular. - */ - list_for_each_entry_safe_reverse(qset, t, &whc->async_list, list_node) { - if (!qset->in_hw_list) { - asl_qset_insert(whc, qset); - update |= WHC_UPDATE_ADDED; - } - - update |= process_qset(whc, qset); - } - - spin_unlock_irq(&whc->lock); - - if (update) { - uint32_t wusbcmd = WUSBCMD_ASYNC_UPDATED | WUSBCMD_ASYNC_SYNCED_DB; - if (update & WHC_UPDATE_REMOVED) - wusbcmd |= WUSBCMD_ASYNC_QSET_RM; - asl_update(whc, wusbcmd); - } - - /* - * Now that the ASL is updated, complete the removal of any - * removed qsets. - * - * If the qset was to be reset, do so and reinsert it into the - * ASL if it has pending transfers. - */ - spin_lock_irq(&whc->lock); - - list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { - qset_remove_complete(whc, qset); - if (qset->reset) { - qset_reset(whc, qset); - if (!list_empty(&qset->stds)) { - asl_qset_insert_begin(whc, qset); - queue_work(whc->workqueue, &whc->async_work); - } - } - } - - spin_unlock_irq(&whc->lock); -} - -/** - * asl_urb_enqueue - queue an URB onto the asynchronous list (ASL). - * @whc: the WHCI host controller - * @urb: the URB to enqueue - * @mem_flags: flags for any memory allocations - * - * The qset for the endpoint is obtained and the urb queued on to it. - * - * Work is scheduled to update the hardware's view of the ASL. - */ -int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) -{ - struct whc_qset *qset; - int err; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); - if (err < 0) { - spin_unlock_irqrestore(&whc->lock, flags); - return err; - } - - qset = get_qset(whc, urb, GFP_ATOMIC); - if (qset == NULL) - err = -ENOMEM; - else - err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); - if (!err) { - if (!qset->in_sw_list && !qset->remove) - asl_qset_insert_begin(whc, qset); - } else - usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); - - spin_unlock_irqrestore(&whc->lock, flags); - - if (!err) - queue_work(whc->workqueue, &whc->async_work); - - return err; -} - -/** - * asl_urb_dequeue - remove an URB (qset) from the async list. - * @whc: the WHCI host controller - * @urb: the URB to dequeue - * @status: the current status of the URB - * - * URBs that do yet have qTDs can simply be removed from the software - * queue, otherwise the qset must be removed from the ASL so the qTDs - * can be removed. - */ -int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status) -{ - struct whc_urb *wurb = urb->hcpriv; - struct whc_qset *qset = wurb->qset; - struct whc_std *std, *t; - bool has_qtd = false; - int ret; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); - if (ret < 0) - goto out; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) { - if (std->qtd) - has_qtd = true; - qset_free_std(whc, std); - } else - std->qtd = NULL; /* so this std is re-added when the qset is */ - } - - if (has_qtd) { - asl_qset_remove(whc, qset); - wurb->status = status; - wurb->is_async = true; - queue_work(whc->workqueue, &wurb->dequeue_work); - } else - qset_remove_urb(whc, qset, urb, status); -out: - spin_unlock_irqrestore(&whc->lock, flags); - - return ret; -} - -/** - * asl_qset_delete - delete a qset from the ASL - */ -void asl_qset_delete(struct whc *whc, struct whc_qset *qset) -{ - qset->remove = 1; - queue_work(whc->workqueue, &whc->async_work); - qset_delete(whc, qset); -} - -/** - * asl_init - initialize the asynchronous schedule list - * - * A dummy qset with no qTDs is added to the ASL to simplify removing - * qsets (no need to stop the ASL when the last qset is removed). - */ -int asl_init(struct whc *whc) -{ - struct whc_qset *qset; - - qset = qset_alloc(whc, GFP_KERNEL); - if (qset == NULL) - return -ENOMEM; - - asl_qset_insert_begin(whc, qset); - asl_qset_insert(whc, qset); - - return 0; -} - -/** - * asl_clean_up - free ASL resources - * - * The ASL is stopped and empty except for the dummy qset. - */ -void asl_clean_up(struct whc *whc) -{ - struct whc_qset *qset; - - if (!list_empty(&whc->async_list)) { - qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); - list_del(&qset->list_node); - qset_free(whc, qset); - } -} diff --git a/drivers/usb/host/whci/debug.c b/drivers/usb/host/whci/debug.c deleted file mode 100644 index 8ddfe3f1f693..000000000000 --- a/drivers/usb/host/whci/debug.c +++ /dev/null @@ -1,153 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) debug. - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/export.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -struct whc_dbg { - struct dentry *di_f; - struct dentry *asl_f; - struct dentry *pzl_f; -}; - -static void qset_print(struct seq_file *s, struct whc_qset *qset) -{ - static const char *qh_type[] = { - "ctrl", "isoc", "bulk", "intr", "rsvd", "rsvd", "rsvd", "lpintr", }; - struct whc_std *std; - struct urb *urb = NULL; - int i; - - seq_printf(s, "qset %08x", (u32)qset->qset_dma); - if (&qset->list_node == qset->whc->async_list.prev) { - seq_printf(s, " (dummy)\n"); - } else { - seq_printf(s, " ep%d%s-%s maxpkt: %d\n", - qset->qh.info1 & 0x0f, - (qset->qh.info1 >> 4) & 0x1 ? "in" : "out", - qh_type[(qset->qh.info1 >> 5) & 0x7], - (qset->qh.info1 >> 16) & 0xffff); - } - seq_printf(s, " -> %08x\n", (u32)qset->qh.link); - seq_printf(s, " info: %08x %08x %08x\n", - qset->qh.info1, qset->qh.info2, qset->qh.info3); - seq_printf(s, " sts: %04x errs: %d curwin: %08x\n", - qset->qh.status, qset->qh.err_count, qset->qh.cur_window); - seq_printf(s, " TD: sts: %08x opts: %08x\n", - qset->qh.overlay.qtd.status, qset->qh.overlay.qtd.options); - - for (i = 0; i < WHCI_QSET_TD_MAX; i++) { - seq_printf(s, " %c%c TD[%d]: sts: %08x opts: %08x ptr: %08x\n", - i == qset->td_start ? 'S' : ' ', - i == qset->td_end ? 'E' : ' ', - i, qset->qtd[i].status, qset->qtd[i].options, - (u32)qset->qtd[i].page_list_ptr); - } - seq_printf(s, " ntds: %d\n", qset->ntds); - list_for_each_entry(std, &qset->stds, list_node) { - if (urb != std->urb) { - urb = std->urb; - seq_printf(s, " urb %p transferred: %d bytes\n", urb, - urb->actual_length); - } - if (std->qtd) - seq_printf(s, " sTD[%td]: %zu bytes @ %08x\n", - std->qtd - &qset->qtd[0], - std->len, std->num_pointers ? - (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); - else - seq_printf(s, " sTD[-]: %zd bytes @ %08x\n", - std->len, std->num_pointers ? - (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); - } -} - -static int di_show(struct seq_file *s, void *p) -{ - struct whc *whc = s->private; - int d; - - for (d = 0; d < whc->n_devices; d++) { - struct di_buf_entry *di = &whc->di_buf[d]; - - seq_printf(s, "DI[%d]\n", d); - seq_printf(s, " availability: %*pb\n", - UWB_NUM_MAS, (unsigned long *)di->availability_info); - seq_printf(s, " %c%c key idx: %d dev addr: %d\n", - (di->addr_sec_info & WHC_DI_SECURE) ? 'S' : ' ', - (di->addr_sec_info & WHC_DI_DISABLE) ? 'D' : ' ', - (di->addr_sec_info & WHC_DI_KEY_IDX_MASK) >> 8, - (di->addr_sec_info & WHC_DI_DEV_ADDR_MASK)); - } - return 0; -} -DEFINE_SHOW_ATTRIBUTE(di); - -static int asl_show(struct seq_file *s, void *p) -{ - struct whc *whc = s->private; - struct whc_qset *qset; - - list_for_each_entry(qset, &whc->async_list, list_node) { - qset_print(s, qset); - } - - return 0; -} -DEFINE_SHOW_ATTRIBUTE(asl); - -static int pzl_show(struct seq_file *s, void *p) -{ - struct whc *whc = s->private; - struct whc_qset *qset; - int period; - - for (period = 0; period < 5; period++) { - seq_printf(s, "Period %d\n", period); - list_for_each_entry(qset, &whc->periodic_list[period], list_node) { - qset_print(s, qset); - } - } - return 0; -} -DEFINE_SHOW_ATTRIBUTE(pzl); - -void whc_dbg_init(struct whc *whc) -{ - if (whc->wusbhc.pal.debugfs_dir == NULL) - return; - - whc->dbg = kzalloc(sizeof(struct whc_dbg), GFP_KERNEL); - if (whc->dbg == NULL) - return; - - whc->dbg->di_f = debugfs_create_file("di", 0444, - whc->wusbhc.pal.debugfs_dir, whc, - &di_fops); - whc->dbg->asl_f = debugfs_create_file("asl", 0444, - whc->wusbhc.pal.debugfs_dir, whc, - &asl_fops); - whc->dbg->pzl_f = debugfs_create_file("pzl", 0444, - whc->wusbhc.pal.debugfs_dir, whc, - &pzl_fops); -} - -void whc_dbg_clean_up(struct whc *whc) -{ - if (whc->dbg) { - debugfs_remove(whc->dbg->pzl_f); - debugfs_remove(whc->dbg->asl_f); - debugfs_remove(whc->dbg->di_f); - kfree(whc->dbg); - } -} diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c deleted file mode 100644 index 8af9dcfea127..000000000000 --- a/drivers/usb/host/whci/hcd.c +++ /dev/null @@ -1,356 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) driver. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/uwb/umc.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -/* - * One time initialization. - * - * Nothing to do here. - */ -static int whc_reset(struct usb_hcd *usb_hcd) -{ - return 0; -} - -/* - * Start the wireless host controller. - * - * Start device notification. - * - * Put hc into run state, set DNTS parameters. - */ -static int whc_start(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - u8 bcid; - int ret; - - mutex_lock(&wusbhc->mutex); - - le_writel(WUSBINTR_GEN_CMD_DONE - | WUSBINTR_HOST_ERR - | WUSBINTR_ASYNC_SCHED_SYNCED - | WUSBINTR_DNTS_INT - | WUSBINTR_ERR_INT - | WUSBINTR_INT, - whc->base + WUSBINTR); - - /* set cluster ID */ - bcid = wusb_cluster_id_get(); - ret = whc_set_cluster_id(whc, bcid); - if (ret < 0) - goto out; - wusbhc->cluster_id = bcid; - - /* start HC */ - whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN); - - usb_hcd->uses_new_polling = 1; - set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); - usb_hcd->state = HC_STATE_RUNNING; - -out: - mutex_unlock(&wusbhc->mutex); - return ret; -} - - -/* - * Stop the wireless host controller. - * - * Stop device notification. - * - * Wait for pending transfer to stop? Put hc into stop state? - */ -static void whc_stop(struct usb_hcd *usb_hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - - mutex_lock(&wusbhc->mutex); - - /* stop HC */ - le_writel(0, whc->base + WUSBINTR); - whc_write_wusbcmd(whc, WUSBCMD_RUN, 0); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_HCHALTED, WUSBSTS_HCHALTED, - 100, "HC to halt"); - - wusb_cluster_id_put(wusbhc->cluster_id); - - mutex_unlock(&wusbhc->mutex); -} - -static int whc_get_frame_number(struct usb_hcd *usb_hcd) -{ - /* Frame numbers are not applicable to WUSB. */ - return -ENOSYS; -} - - -/* - * Queue an URB to the ASL or PZL - */ -static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, - gfp_t mem_flags) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - int ret; - - switch (usb_pipetype(urb->pipe)) { - case PIPE_INTERRUPT: - ret = pzl_urb_enqueue(whc, urb, mem_flags); - break; - case PIPE_ISOCHRONOUS: - dev_err(&whc->umc->dev, "isochronous transfers unsupported\n"); - ret = -ENOTSUPP; - break; - case PIPE_CONTROL: - case PIPE_BULK: - default: - ret = asl_urb_enqueue(whc, urb, mem_flags); - break; - } - - return ret; -} - -/* - * Remove a queued URB from the ASL or PZL. - */ -static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - int ret; - - switch (usb_pipetype(urb->pipe)) { - case PIPE_INTERRUPT: - ret = pzl_urb_dequeue(whc, urb, status); - break; - case PIPE_ISOCHRONOUS: - ret = -ENOTSUPP; - break; - case PIPE_CONTROL: - case PIPE_BULK: - default: - ret = asl_urb_dequeue(whc, urb, status); - break; - } - - return ret; -} - -/* - * Wait for all URBs to the endpoint to be completed, then delete the - * qset. - */ -static void whc_endpoint_disable(struct usb_hcd *usb_hcd, - struct usb_host_endpoint *ep) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - struct whc_qset *qset; - - qset = ep->hcpriv; - if (qset) { - ep->hcpriv = NULL; - if (usb_endpoint_xfer_bulk(&ep->desc) - || usb_endpoint_xfer_control(&ep->desc)) - asl_qset_delete(whc, qset); - else - pzl_qset_delete(whc, qset); - } -} - -static void whc_endpoint_reset(struct usb_hcd *usb_hcd, - struct usb_host_endpoint *ep) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - struct whc_qset *qset; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - qset = ep->hcpriv; - if (qset) { - qset->remove = 1; - qset->reset = 1; - - if (usb_endpoint_xfer_bulk(&ep->desc) - || usb_endpoint_xfer_control(&ep->desc)) - queue_work(whc->workqueue, &whc->async_work); - else - queue_work(whc->workqueue, &whc->periodic_work); - } - - spin_unlock_irqrestore(&whc->lock, flags); -} - - -static const struct hc_driver whc_hc_driver = { - .description = "whci-hcd", - .product_desc = "Wireless host controller", - .hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd), - .irq = whc_int_handler, - .flags = HCD_USB2, - - .reset = whc_reset, - .start = whc_start, - .stop = whc_stop, - .get_frame_number = whc_get_frame_number, - .urb_enqueue = whc_urb_enqueue, - .urb_dequeue = whc_urb_dequeue, - .endpoint_disable = whc_endpoint_disable, - .endpoint_reset = whc_endpoint_reset, - - .hub_status_data = wusbhc_rh_status_data, - .hub_control = wusbhc_rh_control, - .start_port_reset = wusbhc_rh_start_port_reset, -}; - -static int whc_probe(struct umc_dev *umc) -{ - int ret; - struct usb_hcd *usb_hcd; - struct wusbhc *wusbhc; - struct whc *whc; - struct device *dev = &umc->dev; - - usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci"); - if (usb_hcd == NULL) { - dev_err(dev, "unable to create hcd\n"); - return -ENOMEM; - } - - usb_hcd->wireless = 1; - usb_hcd->self.sg_tablesize = 2048; /* somewhat arbitrary */ - - wusbhc = usb_hcd_to_wusbhc(usb_hcd); - whc = wusbhc_to_whc(wusbhc); - whc->umc = umc; - - ret = whc_init(whc); - if (ret) - goto error_whc_init; - - wusbhc->dev = dev; - wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent); - if (!wusbhc->uwb_rc) { - ret = -ENODEV; - dev_err(dev, "cannot get radio controller\n"); - goto error_uwb_rc; - } - - if (whc->n_devices > USB_MAXCHILDREN) { - dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n", - whc->n_devices); - wusbhc->ports_max = USB_MAXCHILDREN; - } else - wusbhc->ports_max = whc->n_devices; - wusbhc->mmcies_max = whc->n_mmc_ies; - wusbhc->start = whc_wusbhc_start; - wusbhc->stop = whc_wusbhc_stop; - wusbhc->mmcie_add = whc_mmcie_add; - wusbhc->mmcie_rm = whc_mmcie_rm; - wusbhc->dev_info_set = whc_dev_info_set; - wusbhc->bwa_set = whc_bwa_set; - wusbhc->set_num_dnts = whc_set_num_dnts; - wusbhc->set_ptk = whc_set_ptk; - wusbhc->set_gtk = whc_set_gtk; - - ret = wusbhc_create(wusbhc); - if (ret) - goto error_wusbhc_create; - - ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED); - if (ret) { - dev_err(dev, "cannot add HCD: %d\n", ret); - goto error_usb_add_hcd; - } - device_wakeup_enable(usb_hcd->self.controller); - - ret = wusbhc_b_create(wusbhc); - if (ret) { - dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret); - goto error_wusbhc_b_create; - } - - whc_dbg_init(whc); - - return 0; - -error_wusbhc_b_create: - usb_remove_hcd(usb_hcd); -error_usb_add_hcd: - wusbhc_destroy(wusbhc); -error_wusbhc_create: - uwb_rc_put(wusbhc->uwb_rc); -error_uwb_rc: - whc_clean_up(whc); -error_whc_init: - usb_put_hcd(usb_hcd); - return ret; -} - - -static void whc_remove(struct umc_dev *umc) -{ - struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev); - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - - if (usb_hcd) { - whc_dbg_clean_up(whc); - wusbhc_b_destroy(wusbhc); - usb_remove_hcd(usb_hcd); - wusbhc_destroy(wusbhc); - uwb_rc_put(wusbhc->uwb_rc); - whc_clean_up(whc); - usb_put_hcd(usb_hcd); - } -} - -static struct umc_driver whci_hc_driver = { - .name = "whci-hcd", - .cap_id = UMC_CAP_ID_WHCI_WUSB_HC, - .probe = whc_probe, - .remove = whc_remove, -}; - -static int __init whci_hc_driver_init(void) -{ - return umc_driver_register(&whci_hc_driver); -} -module_init(whci_hc_driver_init); - -static void __exit whci_hc_driver_exit(void) -{ - umc_driver_unregister(&whci_hc_driver); -} -module_exit(whci_hc_driver_exit); - -/* PCI device ID's that we handle (so it gets loaded) */ -static struct pci_device_id __used whci_hcd_id_table[] = { - { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, - { /* empty last entry */ } -}; -MODULE_DEVICE_TABLE(pci, whci_hcd_id_table); - -MODULE_DESCRIPTION("WHCI Wireless USB host controller driver"); -MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c deleted file mode 100644 index 22b3b7f7419d..000000000000 --- a/drivers/usb/host/whci/hw.c +++ /dev/null @@ -1,93 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) hardware access helpers. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/uwb/umc.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val) -{ - unsigned long flags; - u32 cmd; - - spin_lock_irqsave(&whc->lock, flags); - - cmd = le_readl(whc->base + WUSBCMD); - cmd = (cmd & ~mask) | val; - le_writel(cmd, whc->base + WUSBCMD); - - spin_unlock_irqrestore(&whc->lock, flags); -} - -/** - * whc_do_gencmd - start a generic command via the WUSBGENCMDSTS register - * @whc: the WHCI HC - * @cmd: command to start. - * @params: parameters for the command (the WUSBGENCMDPARAMS register value). - * @addr: pointer to any data for the command (may be NULL). - * @len: length of the data (if any). - */ -int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len) -{ - unsigned long flags; - dma_addr_t dma_addr; - int t; - int ret = 0; - - mutex_lock(&whc->mutex); - - /* Wait for previous command to complete. */ - t = wait_event_timeout(whc->cmd_wq, - (le_readl(whc->base + WUSBGENCMDSTS) & WUSBGENCMDSTS_ACTIVE) == 0, - WHC_GENCMD_TIMEOUT_MS); - if (t == 0) { - dev_err(&whc->umc->dev, "generic command timeout (%04x/%04x)\n", - le_readl(whc->base + WUSBGENCMDSTS), - le_readl(whc->base + WUSBGENCMDPARAMS)); - ret = -ETIMEDOUT; - goto out; - } - - if (addr) { - memcpy(whc->gen_cmd_buf, addr, len); - dma_addr = whc->gen_cmd_buf_dma; - } else - dma_addr = 0; - - /* Poke registers to start cmd. */ - spin_lock_irqsave(&whc->lock, flags); - - le_writel(params, whc->base + WUSBGENCMDPARAMS); - le_writeq(dma_addr, whc->base + WUSBGENADDR); - - le_writel(WUSBGENCMDSTS_ACTIVE | WUSBGENCMDSTS_IOC | cmd, - whc->base + WUSBGENCMDSTS); - - spin_unlock_irqrestore(&whc->lock, flags); -out: - mutex_unlock(&whc->mutex); - - return ret; -} - -/** - * whc_hw_error - recover from a hardware error - * @whc: the WHCI HC that broke. - * @reason: a description of the failure. - * - * Recover from broken hardware with a full reset. - */ -void whc_hw_error(struct whc *whc, const char *reason) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - - dev_err(&whc->umc->dev, "hardware error: %s\n", reason); - wusbhc_reset_all(wusbhc); -} diff --git a/drivers/usb/host/whci/init.c b/drivers/usb/host/whci/init.c deleted file mode 100644 index 82416973f773..000000000000 --- a/drivers/usb/host/whci/init.c +++ /dev/null @@ -1,177 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) initialization. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> -#include <linux/uwb/umc.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -/* - * Reset the host controller. - */ -static void whc_hw_reset(struct whc *whc) -{ - le_writel(WUSBCMD_WHCRESET, whc->base + WUSBCMD); - whci_wait_for(&whc->umc->dev, whc->base + WUSBCMD, WUSBCMD_WHCRESET, 0, - 100, "reset"); -} - -static void whc_hw_init_di_buf(struct whc *whc) -{ - int d; - - /* Disable all entries in the Device Information buffer. */ - for (d = 0; d < whc->n_devices; d++) - whc->di_buf[d].addr_sec_info = WHC_DI_DISABLE; - - le_writeq(whc->di_buf_dma, whc->base + WUSBDEVICEINFOADDR); -} - -static void whc_hw_init_dn_buf(struct whc *whc) -{ - /* Clear the Device Notification buffer to ensure the V (valid) - * bits are clear. */ - memset(whc->dn_buf, 0, 4096); - - le_writeq(whc->dn_buf_dma, whc->base + WUSBDNTSBUFADDR); -} - -int whc_init(struct whc *whc) -{ - u32 whcsparams; - int ret, i; - resource_size_t start, len; - - spin_lock_init(&whc->lock); - mutex_init(&whc->mutex); - init_waitqueue_head(&whc->cmd_wq); - init_waitqueue_head(&whc->async_list_wq); - init_waitqueue_head(&whc->periodic_list_wq); - whc->workqueue = alloc_ordered_workqueue(dev_name(&whc->umc->dev), 0); - if (whc->workqueue == NULL) { - ret = -ENOMEM; - goto error; - } - INIT_WORK(&whc->dn_work, whc_dn_work); - - INIT_WORK(&whc->async_work, scan_async_work); - INIT_LIST_HEAD(&whc->async_list); - INIT_LIST_HEAD(&whc->async_removed_list); - - INIT_WORK(&whc->periodic_work, scan_periodic_work); - for (i = 0; i < 5; i++) - INIT_LIST_HEAD(&whc->periodic_list[i]); - INIT_LIST_HEAD(&whc->periodic_removed_list); - - /* Map HC registers. */ - start = whc->umc->resource.start; - len = whc->umc->resource.end - start + 1; - if (!request_mem_region(start, len, "whci-hc")) { - dev_err(&whc->umc->dev, "can't request HC region\n"); - ret = -EBUSY; - goto error; - } - whc->base_phys = start; - whc->base = ioremap(start, len); - if (!whc->base) { - dev_err(&whc->umc->dev, "ioremap\n"); - ret = -ENOMEM; - goto error; - } - - whc_hw_reset(whc); - - /* Read maximum number of devices, keys and MMC IEs. */ - whcsparams = le_readl(whc->base + WHCSPARAMS); - whc->n_devices = WHCSPARAMS_TO_N_DEVICES(whcsparams); - whc->n_keys = WHCSPARAMS_TO_N_KEYS(whcsparams); - whc->n_mmc_ies = WHCSPARAMS_TO_N_MMC_IES(whcsparams); - - dev_dbg(&whc->umc->dev, "N_DEVICES = %d, N_KEYS = %d, N_MMC_IES = %d\n", - whc->n_devices, whc->n_keys, whc->n_mmc_ies); - - whc->qset_pool = dma_pool_create("qset", &whc->umc->dev, - sizeof(struct whc_qset), 64, 0); - if (whc->qset_pool == NULL) { - ret = -ENOMEM; - goto error; - } - - ret = asl_init(whc); - if (ret < 0) - goto error; - ret = pzl_init(whc); - if (ret < 0) - goto error; - - /* Allocate and initialize a buffer for generic commands, the - Device Information buffer, and the Device Notification - buffer. */ - - whc->gen_cmd_buf = dma_alloc_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, - &whc->gen_cmd_buf_dma, GFP_KERNEL); - if (whc->gen_cmd_buf == NULL) { - ret = -ENOMEM; - goto error; - } - - whc->dn_buf = dma_alloc_coherent(&whc->umc->dev, - sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, - &whc->dn_buf_dma, GFP_KERNEL); - if (!whc->dn_buf) { - ret = -ENOMEM; - goto error; - } - whc_hw_init_dn_buf(whc); - - whc->di_buf = dma_alloc_coherent(&whc->umc->dev, - sizeof(struct di_buf_entry) * whc->n_devices, - &whc->di_buf_dma, GFP_KERNEL); - if (!whc->di_buf) { - ret = -ENOMEM; - goto error; - } - whc_hw_init_di_buf(whc); - - return 0; - -error: - whc_clean_up(whc); - return ret; -} - -void whc_clean_up(struct whc *whc) -{ - resource_size_t len; - - if (whc->di_buf) - dma_free_coherent(&whc->umc->dev, sizeof(struct di_buf_entry) * whc->n_devices, - whc->di_buf, whc->di_buf_dma); - if (whc->dn_buf) - dma_free_coherent(&whc->umc->dev, sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, - whc->dn_buf, whc->dn_buf_dma); - if (whc->gen_cmd_buf) - dma_free_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, - whc->gen_cmd_buf, whc->gen_cmd_buf_dma); - - pzl_clean_up(whc); - asl_clean_up(whc); - - dma_pool_destroy(whc->qset_pool); - - len = resource_size(&whc->umc->resource); - if (whc->base) - iounmap(whc->base); - if (whc->base_phys) - release_mem_region(whc->base_phys, len); - - if (whc->workqueue) - destroy_workqueue(whc->workqueue); -} diff --git a/drivers/usb/host/whci/int.c b/drivers/usb/host/whci/int.c deleted file mode 100644 index 7e4ad1b8f3e3..000000000000 --- a/drivers/usb/host/whci/int.c +++ /dev/null @@ -1,82 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) interrupt handling. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/uwb/umc.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -static void transfer_done(struct whc *whc) -{ - queue_work(whc->workqueue, &whc->async_work); - queue_work(whc->workqueue, &whc->periodic_work); -} - -irqreturn_t whc_int_handler(struct usb_hcd *hcd) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(hcd); - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 sts; - - sts = le_readl(whc->base + WUSBSTS); - if (!(sts & WUSBSTS_INT_MASK)) - return IRQ_NONE; - le_writel(sts & WUSBSTS_INT_MASK, whc->base + WUSBSTS); - - if (sts & WUSBSTS_GEN_CMD_DONE) - wake_up(&whc->cmd_wq); - - if (sts & WUSBSTS_HOST_ERR) - dev_err(&whc->umc->dev, "FIXME: host system error\n"); - - if (sts & WUSBSTS_ASYNC_SCHED_SYNCED) - wake_up(&whc->async_list_wq); - - if (sts & WUSBSTS_PERIODIC_SCHED_SYNCED) - wake_up(&whc->periodic_list_wq); - - if (sts & WUSBSTS_DNTS_INT) - queue_work(whc->workqueue, &whc->dn_work); - - /* - * A transfer completed (see [WHCI] section 4.7.1.2 for when - * this occurs). - */ - if (sts & (WUSBSTS_INT | WUSBSTS_ERR_INT)) - transfer_done(whc); - - return IRQ_HANDLED; -} - -static int process_dn_buf(struct whc *whc) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - struct dn_buf_entry *dn; - int processed = 0; - - for (dn = whc->dn_buf; dn < whc->dn_buf + WHC_N_DN_ENTRIES; dn++) { - if (dn->status & WHC_DN_STATUS_VALID) { - wusbhc_handle_dn(wusbhc, dn->src_addr, - (struct wusb_dn_hdr *)dn->dn_data, - dn->msg_size); - dn->status &= ~WHC_DN_STATUS_VALID; - processed++; - } - } - return processed; -} - -void whc_dn_work(struct work_struct *work) -{ - struct whc *whc = container_of(work, struct whc, dn_work); - int processed; - - do { - processed = process_dn_buf(whc); - } while (processed); -} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c deleted file mode 100644 index ef52aeb02fde..000000000000 --- a/drivers/usb/host/whci/pzl.c +++ /dev/null @@ -1,404 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) periodic schedule management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> -#include <linux/uwb/umc.h> -#include <linux/usb.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -static void update_pzl_pointers(struct whc *whc, int period, u64 addr) -{ - switch (period) { - case 0: - whc_qset_set_link_ptr(&whc->pz_list[0], addr); - whc_qset_set_link_ptr(&whc->pz_list[2], addr); - whc_qset_set_link_ptr(&whc->pz_list[4], addr); - whc_qset_set_link_ptr(&whc->pz_list[6], addr); - whc_qset_set_link_ptr(&whc->pz_list[8], addr); - whc_qset_set_link_ptr(&whc->pz_list[10], addr); - whc_qset_set_link_ptr(&whc->pz_list[12], addr); - whc_qset_set_link_ptr(&whc->pz_list[14], addr); - break; - case 1: - whc_qset_set_link_ptr(&whc->pz_list[1], addr); - whc_qset_set_link_ptr(&whc->pz_list[5], addr); - whc_qset_set_link_ptr(&whc->pz_list[9], addr); - whc_qset_set_link_ptr(&whc->pz_list[13], addr); - break; - case 2: - whc_qset_set_link_ptr(&whc->pz_list[3], addr); - whc_qset_set_link_ptr(&whc->pz_list[11], addr); - break; - case 3: - whc_qset_set_link_ptr(&whc->pz_list[7], addr); - break; - case 4: - whc_qset_set_link_ptr(&whc->pz_list[15], addr); - break; - } -} - -/* - * Return the 'period' to use for this qset. The minimum interval for - * the endpoint is used so whatever urbs are submitted the device is - * polled often enough. - */ -static int qset_get_period(struct whc *whc, struct whc_qset *qset) -{ - uint8_t bInterval = qset->ep->desc.bInterval; - - if (bInterval < 6) - bInterval = 6; - if (bInterval > 10) - bInterval = 10; - return bInterval - 6; -} - -static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset) -{ - int period; - - period = qset_get_period(whc, qset); - - qset_clear(whc, qset); - list_move(&qset->list_node, &whc->periodic_list[period]); - qset->in_sw_list = true; -} - -static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset) -{ - list_move(&qset->list_node, &whc->periodic_removed_list); - qset->in_hw_list = false; - qset->in_sw_list = false; -} - -/** - * pzl_process_qset - process any recently inactivated or halted qTDs - * in a qset. - * - * After inactive qTDs are removed, new qTDs can be added if the - * urb queue still contains URBs. - * - * Returns the schedule updates required. - */ -static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) -{ - enum whc_update update = 0; - uint32_t status = 0; - - while (qset->ntds) { - struct whc_qtd *td; - - td = &qset->qtd[qset->td_start]; - status = le32_to_cpu(td->status); - - /* - * Nothing to do with a still active qTD. - */ - if (status & QTD_STS_ACTIVE) - break; - - if (status & QTD_STS_HALTED) { - /* Ug, an error. */ - process_halted_qtd(whc, qset, td); - /* A halted qTD always triggers an update - because the qset was either removed or - reactivated. */ - update |= WHC_UPDATE_UPDATED; - goto done; - } - - /* Mmm, a completed qTD. */ - process_inactive_qtd(whc, qset, td); - } - - if (!qset->remove) - update |= qset_add_qtds(whc, qset); - -done: - /* - * If there are no qTDs in this qset, remove it from the PZL. - */ - if (qset->remove && qset->ntds == 0) { - pzl_qset_remove(whc, qset); - update |= WHC_UPDATE_REMOVED; - } - - return update; -} - -/** - * pzl_start - start the periodic schedule - * @whc: the WHCI host controller - * - * The PZL must be valid (e.g., all entries in the list should have - * the T bit set). - */ -void pzl_start(struct whc *whc) -{ - le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); - - whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED, - 1000, "start PZL"); -} - -/** - * pzl_stop - stop the periodic schedule - * @whc: the WHCI host controller - */ -void pzl_stop(struct whc *whc) -{ - whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0); - whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, - WUSBSTS_PERIODIC_SCHED, 0, - 1000, "stop PZL"); -} - -/** - * pzl_update - request a PZL update and wait for the hardware to be synced - * @whc: the WHCI HC - * @wusbcmd: WUSBCMD value to start the update. - * - * If the WUSB HC is inactive (i.e., the PZL is stopped) then the - * update must be skipped as the hardware may not respond to update - * requests. - */ -void pzl_update(struct whc *whc, uint32_t wusbcmd) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - long t; - - mutex_lock(&wusbhc->mutex); - if (wusbhc->active) { - whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - t = wait_event_timeout( - whc->periodic_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0, - msecs_to_jiffies(1000)); - if (t == 0) - whc_hw_error(whc, "PZL update timeout"); - } - mutex_unlock(&wusbhc->mutex); -} - -static void update_pzl_hw_view(struct whc *whc) -{ - struct whc_qset *qset, *t; - int period; - u64 tmp_qh = 0; - - for (period = 0; period < 5; period++) { - list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { - whc_qset_set_link_ptr(&qset->qh.link, tmp_qh); - tmp_qh = qset->qset_dma; - qset->in_hw_list = true; - } - update_pzl_pointers(whc, period, tmp_qh); - } -} - -/** - * scan_periodic_work - scan the PZL for qsets to process. - * - * Process each qset in the PZL in turn and then signal the WHC that - * the PZL has been updated. - * - * Then start, stop or update the periodic schedule as required. - */ -void scan_periodic_work(struct work_struct *work) -{ - struct whc *whc = container_of(work, struct whc, periodic_work); - struct whc_qset *qset, *t; - enum whc_update update = 0; - int period; - - spin_lock_irq(&whc->lock); - - for (period = 4; period >= 0; period--) { - list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { - if (!qset->in_hw_list) - update |= WHC_UPDATE_ADDED; - update |= pzl_process_qset(whc, qset); - } - } - - if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED)) - update_pzl_hw_view(whc); - - spin_unlock_irq(&whc->lock); - - if (update) { - uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB; - if (update & WHC_UPDATE_REMOVED) - wusbcmd |= WUSBCMD_PERIODIC_QSET_RM; - pzl_update(whc, wusbcmd); - } - - /* - * Now that the PZL is updated, complete the removal of any - * removed qsets. - * - * If the qset was to be reset, do so and reinsert it into the - * PZL if it has pending transfers. - */ - spin_lock_irq(&whc->lock); - - list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { - qset_remove_complete(whc, qset); - if (qset->reset) { - qset_reset(whc, qset); - if (!list_empty(&qset->stds)) { - qset_insert_in_sw_list(whc, qset); - queue_work(whc->workqueue, &whc->periodic_work); - } - } - } - - spin_unlock_irq(&whc->lock); -} - -/** - * pzl_urb_enqueue - queue an URB onto the periodic list (PZL) - * @whc: the WHCI host controller - * @urb: the URB to enqueue - * @mem_flags: flags for any memory allocations - * - * The qset for the endpoint is obtained and the urb queued on to it. - * - * Work is scheduled to update the hardware's view of the PZL. - */ -int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) -{ - struct whc_qset *qset; - int err; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); - if (err < 0) { - spin_unlock_irqrestore(&whc->lock, flags); - return err; - } - - qset = get_qset(whc, urb, GFP_ATOMIC); - if (qset == NULL) - err = -ENOMEM; - else - err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); - if (!err) { - if (!qset->in_sw_list && !qset->remove) - qset_insert_in_sw_list(whc, qset); - } else - usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb); - - spin_unlock_irqrestore(&whc->lock, flags); - - if (!err) - queue_work(whc->workqueue, &whc->periodic_work); - - return err; -} - -/** - * pzl_urb_dequeue - remove an URB (qset) from the periodic list - * @whc: the WHCI host controller - * @urb: the URB to dequeue - * @status: the current status of the URB - * - * URBs that do yet have qTDs can simply be removed from the software - * queue, otherwise the qset must be removed so the qTDs can be safely - * removed. - */ -int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status) -{ - struct whc_urb *wurb = urb->hcpriv; - struct whc_qset *qset = wurb->qset; - struct whc_std *std, *t; - bool has_qtd = false; - int ret; - unsigned long flags; - - spin_lock_irqsave(&whc->lock, flags); - - ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); - if (ret < 0) - goto out; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) { - if (std->qtd) - has_qtd = true; - qset_free_std(whc, std); - } else - std->qtd = NULL; /* so this std is re-added when the qset is */ - } - - if (has_qtd) { - pzl_qset_remove(whc, qset); - update_pzl_hw_view(whc); - wurb->status = status; - wurb->is_async = false; - queue_work(whc->workqueue, &wurb->dequeue_work); - } else - qset_remove_urb(whc, qset, urb, status); -out: - spin_unlock_irqrestore(&whc->lock, flags); - - return ret; -} - -/** - * pzl_qset_delete - delete a qset from the PZL - */ -void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) -{ - qset->remove = 1; - queue_work(whc->workqueue, &whc->periodic_work); - qset_delete(whc, qset); -} - -/** - * pzl_init - initialize the periodic zone list - * @whc: the WHCI host controller - */ -int pzl_init(struct whc *whc) -{ - int i; - - whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16, - &whc->pz_list_dma, GFP_KERNEL); - if (whc->pz_list == NULL) - return -ENOMEM; - - /* Set T bit on all elements in PZL. */ - for (i = 0; i < 16; i++) - whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); - - le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); - - return 0; -} - -/** - * pzl_clean_up - free PZL resources - * @whc: the WHCI host controller - * - * The PZL is stopped and empty. - */ -void pzl_clean_up(struct whc *whc) -{ - if (whc->pz_list) - dma_free_coherent(&whc->umc->dev, sizeof(u64) * 16, whc->pz_list, - whc->pz_list_dma); -} diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c deleted file mode 100644 index 925166a207aa..000000000000 --- a/drivers/usb/host/whci/qset.c +++ /dev/null @@ -1,831 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) qset management. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/slab.h> -#include <linux/uwb/umc.h> -#include <linux/usb.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags) -{ - struct whc_qset *qset; - dma_addr_t dma; - - qset = dma_pool_zalloc(whc->qset_pool, mem_flags, &dma); - if (qset == NULL) - return NULL; - - qset->qset_dma = dma; - qset->whc = whc; - - INIT_LIST_HEAD(&qset->list_node); - INIT_LIST_HEAD(&qset->stds); - - return qset; -} - -/** - * qset_fill_qh - fill the static endpoint state in a qset's QHead - * @qset: the qset whose QH needs initializing with static endpoint - * state - * @urb: an urb for a transfer to this endpoint - */ -static void qset_fill_qh(struct whc *whc, struct whc_qset *qset, struct urb *urb) -{ - struct usb_device *usb_dev = urb->dev; - struct wusb_dev *wusb_dev = usb_dev->wusb_dev; - struct usb_wireless_ep_comp_descriptor *epcd; - bool is_out; - uint8_t phy_rate; - - is_out = usb_pipeout(urb->pipe); - - qset->max_packet = le16_to_cpu(urb->ep->desc.wMaxPacketSize); - - epcd = (struct usb_wireless_ep_comp_descriptor *)qset->ep->extra; - if (epcd) { - qset->max_seq = epcd->bMaxSequence; - qset->max_burst = epcd->bMaxBurst; - } else { - qset->max_seq = 2; - qset->max_burst = 1; - } - - /* - * Initial PHY rate is 53.3 Mbit/s for control endpoints or - * the maximum supported by the device for other endpoints - * (unless limited by the user). - */ - if (usb_pipecontrol(urb->pipe)) - phy_rate = UWB_PHY_RATE_53; - else { - uint16_t phy_rates; - - phy_rates = le16_to_cpu(wusb_dev->wusb_cap_descr->wPHYRates); - phy_rate = fls(phy_rates) - 1; - if (phy_rate > whc->wusbhc.phy_rate) - phy_rate = whc->wusbhc.phy_rate; - } - - qset->qh.info1 = cpu_to_le32( - QH_INFO1_EP(usb_pipeendpoint(urb->pipe)) - | (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN) - | usb_pipe_to_qh_type(urb->pipe) - | QH_INFO1_DEV_INFO_IDX(wusb_port_no_to_idx(usb_dev->portnum)) - | QH_INFO1_MAX_PKT_LEN(qset->max_packet) - ); - qset->qh.info2 = cpu_to_le32( - QH_INFO2_BURST(qset->max_burst) - | QH_INFO2_DBP(0) - | QH_INFO2_MAX_COUNT(3) - | QH_INFO2_MAX_RETRY(3) - | QH_INFO2_MAX_SEQ(qset->max_seq - 1) - ); - /* FIXME: where can we obtain these Tx parameters from? Why - * doesn't the chip know what Tx power to use? It knows the Rx - * strength and can presumably guess the Tx power required - * from that? */ - qset->qh.info3 = cpu_to_le32( - QH_INFO3_TX_RATE(phy_rate) - | QH_INFO3_TX_PWR(0) /* 0 == max power */ - ); - - qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); -} - -/** - * qset_clear - clear fields in a qset so it may be reinserted into a - * schedule. - * - * The sequence number and current window are not cleared (see - * qset_reset()). - */ -void qset_clear(struct whc *whc, struct whc_qset *qset) -{ - qset->td_start = qset->td_end = qset->ntds = 0; - - qset->qh.link = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); - qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK; - qset->qh.err_count = 0; - qset->qh.scratch[0] = 0; - qset->qh.scratch[1] = 0; - qset->qh.scratch[2] = 0; - - memset(&qset->qh.overlay, 0, sizeof(qset->qh.overlay)); - - init_completion(&qset->remove_complete); -} - -/** - * qset_reset - reset endpoint state in a qset. - * - * Clears the sequence number and current window. This qset must not - * be in the ASL or PZL. - */ -void qset_reset(struct whc *whc, struct whc_qset *qset) -{ - qset->reset = 0; - - qset->qh.status &= ~QH_STATUS_SEQ_MASK; - qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); -} - -/** - * get_qset - get the qset for an async endpoint - * - * A new qset is created if one does not already exist. - */ -struct whc_qset *get_qset(struct whc *whc, struct urb *urb, - gfp_t mem_flags) -{ - struct whc_qset *qset; - - qset = urb->ep->hcpriv; - if (qset == NULL) { - qset = qset_alloc(whc, mem_flags); - if (qset == NULL) - return NULL; - - qset->ep = urb->ep; - urb->ep->hcpriv = qset; - qset_fill_qh(whc, qset, urb); - } - return qset; -} - -void qset_remove_complete(struct whc *whc, struct whc_qset *qset) -{ - qset->remove = 0; - list_del_init(&qset->list_node); - complete(&qset->remove_complete); -} - -/** - * qset_add_qtds - add qTDs for an URB to a qset - * - * Returns true if the list (ASL/PZL) must be updated because (for a - * WHCI 0.95 controller) an activated qTD was pointed to be iCur. - */ -enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset) -{ - struct whc_std *std; - enum whc_update update = 0; - - list_for_each_entry(std, &qset->stds, list_node) { - struct whc_qtd *qtd; - uint32_t status; - - if (qset->ntds >= WHCI_QSET_TD_MAX - || (qset->pause_after_urb && std->urb != qset->pause_after_urb)) - break; - - if (std->qtd) - continue; /* already has a qTD */ - - qtd = std->qtd = &qset->qtd[qset->td_end]; - - /* Fill in setup bytes for control transfers. */ - if (usb_pipecontrol(std->urb->pipe)) - memcpy(qtd->setup, std->urb->setup_packet, 8); - - status = QTD_STS_ACTIVE | QTD_STS_LEN(std->len); - - if (whc_std_last(std) && usb_pipeout(std->urb->pipe)) - status |= QTD_STS_LAST_PKT; - - /* - * For an IN transfer the iAlt field should be set so - * the h/w will automatically advance to the next - * transfer. However, if there are 8 or more TDs - * remaining in this transfer then iAlt cannot be set - * as it could point to somewhere in this transfer. - */ - if (std->ntds_remaining < WHCI_QSET_TD_MAX) { - int ialt; - ialt = (qset->td_end + std->ntds_remaining) % WHCI_QSET_TD_MAX; - status |= QTD_STS_IALT(ialt); - } else if (usb_pipein(std->urb->pipe)) - qset->pause_after_urb = std->urb; - - if (std->num_pointers) - qtd->options = cpu_to_le32(QTD_OPT_IOC); - else - qtd->options = cpu_to_le32(QTD_OPT_IOC | QTD_OPT_SMALL); - qtd->page_list_ptr = cpu_to_le64(std->dma_addr); - - qtd->status = cpu_to_le32(status); - - if (QH_STATUS_TO_ICUR(qset->qh.status) == qset->td_end) - update = WHC_UPDATE_UPDATED; - - if (++qset->td_end >= WHCI_QSET_TD_MAX) - qset->td_end = 0; - qset->ntds++; - } - - return update; -} - -/** - * qset_remove_qtd - remove the first qTD from a qset. - * - * The qTD might be still active (if it's part of a IN URB that - * resulted in a short read) so ensure it's deactivated. - */ -static void qset_remove_qtd(struct whc *whc, struct whc_qset *qset) -{ - qset->qtd[qset->td_start].status = 0; - - if (++qset->td_start >= WHCI_QSET_TD_MAX) - qset->td_start = 0; - qset->ntds--; -} - -static void qset_copy_bounce_to_sg(struct whc *whc, struct whc_std *std) -{ - struct scatterlist *sg; - void *bounce; - size_t remaining, offset; - - bounce = std->bounce_buf; - remaining = std->len; - - sg = std->bounce_sg; - offset = std->bounce_offset; - - while (remaining) { - size_t len; - - len = min(sg->length - offset, remaining); - memcpy(sg_virt(sg) + offset, bounce, len); - - bounce += len; - remaining -= len; - - offset += len; - if (offset >= sg->length) { - sg = sg_next(sg); - offset = 0; - } - } - -} - -/** - * qset_free_std - remove an sTD and free it. - * @whc: the WHCI host controller - * @std: the sTD to remove and free. - */ -void qset_free_std(struct whc *whc, struct whc_std *std) -{ - list_del(&std->list_node); - if (std->bounce_buf) { - bool is_out = usb_pipeout(std->urb->pipe); - dma_addr_t dma_addr; - - if (std->num_pointers) - dma_addr = le64_to_cpu(std->pl_virt[0].buf_ptr); - else - dma_addr = std->dma_addr; - - dma_unmap_single(whc->wusbhc.dev, dma_addr, - std->len, is_out ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - if (!is_out) - qset_copy_bounce_to_sg(whc, std); - kfree(std->bounce_buf); - } - if (std->pl_virt) { - if (!dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) - dma_unmap_single(whc->wusbhc.dev, std->dma_addr, - std->num_pointers * sizeof(struct whc_page_list_entry), - DMA_TO_DEVICE); - kfree(std->pl_virt); - std->pl_virt = NULL; - } - kfree(std); -} - -/** - * qset_remove_qtds - remove an URB's qTDs (and sTDs). - */ -static void qset_remove_qtds(struct whc *whc, struct whc_qset *qset, - struct urb *urb) -{ - struct whc_std *std, *t; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb != urb) - break; - if (std->qtd != NULL) - qset_remove_qtd(whc, qset); - qset_free_std(whc, std); - } -} - -/** - * qset_free_stds - free any remaining sTDs for an URB. - */ -static void qset_free_stds(struct whc_qset *qset, struct urb *urb) -{ - struct whc_std *std, *t; - - list_for_each_entry_safe(std, t, &qset->stds, list_node) { - if (std->urb == urb) - qset_free_std(qset->whc, std); - } -} - -static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_flags) -{ - dma_addr_t dma_addr = std->dma_addr; - dma_addr_t sp, ep; - size_t pl_len; - int p; - - /* Short buffers don't need a page list. */ - if (std->len <= WHCI_PAGE_SIZE) { - std->num_pointers = 0; - return 0; - } - - sp = dma_addr & ~(WHCI_PAGE_SIZE-1); - ep = dma_addr + std->len; - std->num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE); - - pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - std->pl_virt = kmalloc(pl_len, mem_flags); - if (std->pl_virt == NULL) - return -ENOMEM; - std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE); - if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) { - kfree(std->pl_virt); - return -EFAULT; - } - - for (p = 0; p < std->num_pointers; p++) { - std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); - dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1); - } - - return 0; -} - -/** - * urb_dequeue_work - executes asl/pzl update and gives back the urb to the system. - */ -static void urb_dequeue_work(struct work_struct *work) -{ - struct whc_urb *wurb = container_of(work, struct whc_urb, dequeue_work); - struct whc_qset *qset = wurb->qset; - struct whc *whc = qset->whc; - unsigned long flags; - - if (wurb->is_async) - asl_update(whc, WUSBCMD_ASYNC_UPDATED - | WUSBCMD_ASYNC_SYNCED_DB - | WUSBCMD_ASYNC_QSET_RM); - else - pzl_update(whc, WUSBCMD_PERIODIC_UPDATED - | WUSBCMD_PERIODIC_SYNCED_DB - | WUSBCMD_PERIODIC_QSET_RM); - - spin_lock_irqsave(&whc->lock, flags); - qset_remove_urb(whc, qset, wurb->urb, wurb->status); - spin_unlock_irqrestore(&whc->lock, flags); -} - -static struct whc_std *qset_new_std(struct whc *whc, struct whc_qset *qset, - struct urb *urb, gfp_t mem_flags) -{ - struct whc_std *std; - - std = kzalloc(sizeof(struct whc_std), mem_flags); - if (std == NULL) - return NULL; - - std->urb = urb; - std->qtd = NULL; - - INIT_LIST_HEAD(&std->list_node); - list_add_tail(&std->list_node, &qset->stds); - - return std; -} - -static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *urb, - gfp_t mem_flags) -{ - size_t remaining; - struct scatterlist *sg; - int i; - int ntds = 0; - struct whc_std *std = NULL; - struct whc_page_list_entry *new_pl_virt; - dma_addr_t prev_end = 0; - size_t pl_len; - int p = 0; - - remaining = urb->transfer_buffer_length; - - for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) { - dma_addr_t dma_addr; - size_t dma_remaining; - dma_addr_t sp, ep; - int num_pointers; - - if (remaining == 0) { - break; - } - - dma_addr = sg_dma_address(sg); - dma_remaining = min_t(size_t, sg_dma_len(sg), remaining); - - while (dma_remaining) { - size_t dma_len; - - /* - * We can use the previous std (if it exists) provided that: - * - the previous one ended on a page boundary. - * - the current one begins on a page boundary. - * - the previous one isn't full. - * - * If a new std is needed but the previous one - * was not a whole number of packets then this - * sg list cannot be mapped onto multiple - * qTDs. Return an error and let the caller - * sort it out. - */ - if (!std - || (prev_end & (WHCI_PAGE_SIZE-1)) - || (dma_addr & (WHCI_PAGE_SIZE-1)) - || std->len + WHCI_PAGE_SIZE > QTD_MAX_XFER_SIZE) { - if (std && std->len % qset->max_packet != 0) - return -EINVAL; - std = qset_new_std(whc, qset, urb, mem_flags); - if (std == NULL) { - return -ENOMEM; - } - ntds++; - p = 0; - } - - dma_len = dma_remaining; - - /* - * If the remainder of this element doesn't - * fit in a single qTD, limit the qTD to a - * whole number of packets. This allows the - * remainder to go into the next qTD. - */ - if (std->len + dma_len > QTD_MAX_XFER_SIZE) { - dma_len = (QTD_MAX_XFER_SIZE / qset->max_packet) - * qset->max_packet - std->len; - } - - std->len += dma_len; - std->ntds_remaining = -1; /* filled in later */ - - sp = dma_addr & ~(WHCI_PAGE_SIZE-1); - ep = dma_addr + dma_len; - num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE); - std->num_pointers += num_pointers; - - pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - - new_pl_virt = krealloc(std->pl_virt, pl_len, mem_flags); - if (new_pl_virt == NULL) { - kfree(std->pl_virt); - std->pl_virt = NULL; - return -ENOMEM; - } - std->pl_virt = new_pl_virt; - - for (;p < std->num_pointers; p++) { - std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); - dma_addr = (dma_addr + WHCI_PAGE_SIZE) & ~(WHCI_PAGE_SIZE-1); - } - - prev_end = dma_addr = ep; - dma_remaining -= dma_len; - remaining -= dma_len; - } - } - - /* Now the number of stds is know, go back and fill in - std->ntds_remaining. */ - list_for_each_entry(std, &qset->stds, list_node) { - if (std->ntds_remaining == -1) { - pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); - std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, - pl_len, DMA_TO_DEVICE); - if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) - return -EFAULT; - std->ntds_remaining = ntds--; - } - } - return 0; -} - -/** - * qset_add_urb_sg_linearize - add an urb with sg list, copying the data - * - * If the URB contains an sg list whose elements cannot be directly - * mapped to qTDs then the data must be transferred via bounce - * buffers. - */ -static int qset_add_urb_sg_linearize(struct whc *whc, struct whc_qset *qset, - struct urb *urb, gfp_t mem_flags) -{ - bool is_out = usb_pipeout(urb->pipe); - size_t max_std_len; - size_t remaining; - int ntds = 0; - struct whc_std *std = NULL; - void *bounce = NULL; - struct scatterlist *sg; - int i; - - /* limit maximum bounce buffer to 16 * 3.5 KiB ~= 28 k */ - max_std_len = qset->max_burst * qset->max_packet; - - remaining = urb->transfer_buffer_length; - - for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) { - size_t len; - size_t sg_remaining; - void *orig; - - if (remaining == 0) { - break; - } - - sg_remaining = min_t(size_t, remaining, sg->length); - orig = sg_virt(sg); - - while (sg_remaining) { - if (!std || std->len == max_std_len) { - std = qset_new_std(whc, qset, urb, mem_flags); - if (std == NULL) - return -ENOMEM; - std->bounce_buf = kmalloc(max_std_len, mem_flags); - if (std->bounce_buf == NULL) - return -ENOMEM; - std->bounce_sg = sg; - std->bounce_offset = orig - sg_virt(sg); - bounce = std->bounce_buf; - ntds++; - } - - len = min(sg_remaining, max_std_len - std->len); - - if (is_out) - memcpy(bounce, orig, len); - - std->len += len; - std->ntds_remaining = -1; /* filled in later */ - - bounce += len; - orig += len; - sg_remaining -= len; - remaining -= len; - } - } - - /* - * For each of the new sTDs, map the bounce buffers, create - * page lists (if necessary), and fill in std->ntds_remaining. - */ - list_for_each_entry(std, &qset->stds, list_node) { - if (std->ntds_remaining != -1) - continue; - - std->dma_addr = dma_map_single(&whc->umc->dev, std->bounce_buf, std->len, - is_out ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - if (dma_mapping_error(&whc->umc->dev, std->dma_addr)) - return -EFAULT; - - if (qset_fill_page_list(whc, std, mem_flags) < 0) - return -ENOMEM; - - std->ntds_remaining = ntds--; - } - - return 0; -} - -/** - * qset_add_urb - add an urb to the qset's queue. - * - * The URB is chopped into sTDs, one for each qTD that will required. - * At least one qTD (and sTD) is required even if the transfer has no - * data (e.g., for some control transfers). - */ -int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, - gfp_t mem_flags) -{ - struct whc_urb *wurb; - int remaining = urb->transfer_buffer_length; - u64 transfer_dma = urb->transfer_dma; - int ntds_remaining; - int ret; - - wurb = kzalloc(sizeof(struct whc_urb), mem_flags); - if (wurb == NULL) - goto err_no_mem; - urb->hcpriv = wurb; - wurb->qset = qset; - wurb->urb = urb; - INIT_WORK(&wurb->dequeue_work, urb_dequeue_work); - - if (urb->num_sgs) { - ret = qset_add_urb_sg(whc, qset, urb, mem_flags); - if (ret == -EINVAL) { - qset_free_stds(qset, urb); - ret = qset_add_urb_sg_linearize(whc, qset, urb, mem_flags); - } - if (ret < 0) - goto err_no_mem; - return 0; - } - - ntds_remaining = DIV_ROUND_UP(remaining, QTD_MAX_XFER_SIZE); - if (ntds_remaining == 0) - ntds_remaining = 1; - - while (ntds_remaining) { - struct whc_std *std; - size_t std_len; - - std_len = remaining; - if (std_len > QTD_MAX_XFER_SIZE) - std_len = QTD_MAX_XFER_SIZE; - - std = qset_new_std(whc, qset, urb, mem_flags); - if (std == NULL) - goto err_no_mem; - - std->dma_addr = transfer_dma; - std->len = std_len; - std->ntds_remaining = ntds_remaining; - - if (qset_fill_page_list(whc, std, mem_flags) < 0) - goto err_no_mem; - - ntds_remaining--; - remaining -= std_len; - transfer_dma += std_len; - } - - return 0; - -err_no_mem: - qset_free_stds(qset, urb); - return -ENOMEM; -} - -/** - * qset_remove_urb - remove an URB from the urb queue. - * - * The URB is returned to the USB subsystem. - */ -void qset_remove_urb(struct whc *whc, struct whc_qset *qset, - struct urb *urb, int status) -{ - struct wusbhc *wusbhc = &whc->wusbhc; - struct whc_urb *wurb = urb->hcpriv; - - usb_hcd_unlink_urb_from_ep(&wusbhc->usb_hcd, urb); - /* Drop the lock as urb->complete() may enqueue another urb. */ - spin_unlock(&whc->lock); - wusbhc_giveback_urb(wusbhc, urb, status); - spin_lock(&whc->lock); - - kfree(wurb); -} - -/** - * get_urb_status_from_qtd - get the completed urb status from qTD status - * @urb: completed urb - * @status: qTD status - */ -static int get_urb_status_from_qtd(struct urb *urb, u32 status) -{ - if (status & QTD_STS_HALTED) { - if (status & QTD_STS_DBE) - return usb_pipein(urb->pipe) ? -ENOSR : -ECOMM; - else if (status & QTD_STS_BABBLE) - return -EOVERFLOW; - else if (status & QTD_STS_RCE) - return -ETIME; - return -EPIPE; - } - if (usb_pipein(urb->pipe) - && (urb->transfer_flags & URB_SHORT_NOT_OK) - && urb->actual_length < urb->transfer_buffer_length) - return -EREMOTEIO; - return 0; -} - -/** - * process_inactive_qtd - process an inactive (but not halted) qTD. - * - * Update the urb with the transfer bytes from the qTD, if the urb is - * completely transferred or (in the case of an IN only) the LPF is - * set, then the transfer is complete and the urb should be returned - * to the system. - */ -void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd) -{ - struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); - struct urb *urb = std->urb; - uint32_t status; - bool complete; - - status = le32_to_cpu(qtd->status); - - urb->actual_length += std->len - QTD_STS_TO_LEN(status); - - if (usb_pipein(urb->pipe) && (status & QTD_STS_LAST_PKT)) - complete = true; - else - complete = whc_std_last(std); - - qset_remove_qtd(whc, qset); - qset_free_std(whc, std); - - /* - * Transfers for this URB are complete? Then return it to the - * USB subsystem. - */ - if (complete) { - qset_remove_qtds(whc, qset, urb); - qset_remove_urb(whc, qset, urb, get_urb_status_from_qtd(urb, status)); - - /* - * If iAlt isn't valid then the hardware didn't - * advance iCur. Adjust the start and end pointers to - * match iCur. - */ - if (!(status & QTD_STS_IALT_VALID)) - qset->td_start = qset->td_end - = QH_STATUS_TO_ICUR(le16_to_cpu(qset->qh.status)); - qset->pause_after_urb = NULL; - } -} - -/** - * process_halted_qtd - process a qset with a halted qtd - * - * Remove all the qTDs for the failed URB and return the failed URB to - * the USB subsystem. Then remove all other qTDs so the qset can be - * removed. - * - * FIXME: this is the point where rate adaptation can be done. If a - * transfer failed because it exceeded the maximum number of retries - * then it could be reactivated with a slower rate without having to - * remove the qset. - */ -void process_halted_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd) -{ - struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); - struct urb *urb = std->urb; - int urb_status; - - urb_status = get_urb_status_from_qtd(urb, le32_to_cpu(qtd->status)); - - qset_remove_qtds(whc, qset, urb); - qset_remove_urb(whc, qset, urb, urb_status); - - list_for_each_entry(std, &qset->stds, list_node) { - if (qset->ntds == 0) - break; - qset_remove_qtd(whc, qset); - std->qtd = NULL; - } - - qset->remove = 1; -} - -void qset_free(struct whc *whc, struct whc_qset *qset) -{ - dma_pool_free(whc->qset_pool, qset, qset->qset_dma); -} - -/** - * qset_delete - wait for a qset to be unused, then free it. - */ -void qset_delete(struct whc *whc, struct whc_qset *qset) -{ - wait_for_completion(&qset->remove_complete); - qset_free(whc, qset); -} diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h deleted file mode 100644 index 139476997e7c..000000000000 --- a/drivers/usb/host/whci/whcd.h +++ /dev/null @@ -1,202 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) private header. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#ifndef __WHCD_H -#define __WHCD_H - -#include <linux/uwb/whci.h> -#include <linux/uwb/umc.h> -#include <linux/workqueue.h> - -#include "whci-hc.h" - -/* Generic command timeout. */ -#define WHC_GENCMD_TIMEOUT_MS 100 - -struct whc_dbg; - -struct whc { - struct wusbhc wusbhc; - struct umc_dev *umc; - - resource_size_t base_phys; - void __iomem *base; - int irq; - - u8 n_devices; - u8 n_keys; - u8 n_mmc_ies; - - u64 *pz_list; - struct dn_buf_entry *dn_buf; - struct di_buf_entry *di_buf; - dma_addr_t pz_list_dma; - dma_addr_t dn_buf_dma; - dma_addr_t di_buf_dma; - - spinlock_t lock; - struct mutex mutex; - - void * gen_cmd_buf; - dma_addr_t gen_cmd_buf_dma; - wait_queue_head_t cmd_wq; - - struct workqueue_struct *workqueue; - struct work_struct dn_work; - - struct dma_pool *qset_pool; - - struct list_head async_list; - struct list_head async_removed_list; - wait_queue_head_t async_list_wq; - struct work_struct async_work; - - struct list_head periodic_list[5]; - struct list_head periodic_removed_list; - wait_queue_head_t periodic_list_wq; - struct work_struct periodic_work; - - struct whc_dbg *dbg; -}; - -#define wusbhc_to_whc(w) (container_of((w), struct whc, wusbhc)) - -/** - * struct whc_std - a software TD. - * @urb: the URB this sTD is for. - * @offset: start of the URB's data for this TD. - * @len: the length of data in the associated TD. - * @ntds_remaining: number of TDs (starting from this one) in this transfer. - * - * @bounce_buf: a bounce buffer if the std was from an urb with a sg - * list that could not be mapped to qTDs directly. - * @bounce_sg: the first scatterlist element bounce_buf is for. - * @bounce_offset: the offset into bounce_sg for the start of bounce_buf. - * - * Queued URBs may require more TDs than are available in a qset so we - * use a list of these "software TDs" (sTDs) to hold per-TD data. - */ -struct whc_std { - struct urb *urb; - size_t len; - int ntds_remaining; - struct whc_qtd *qtd; - - struct list_head list_node; - int num_pointers; - dma_addr_t dma_addr; - struct whc_page_list_entry *pl_virt; - - void *bounce_buf; - struct scatterlist *bounce_sg; - unsigned bounce_offset; -}; - -/** - * struct whc_urb - per URB host controller structure. - * @urb: the URB this struct is for. - * @qset: the qset associated to the URB. - * @dequeue_work: the work to remove the URB when dequeued. - * @is_async: the URB belongs to async sheduler or not. - * @status: the status to be returned when calling wusbhc_giveback_urb. - */ -struct whc_urb { - struct urb *urb; - struct whc_qset *qset; - struct work_struct dequeue_work; - bool is_async; - int status; -}; - -/** - * whc_std_last - is this sTD the URB's last? - * @std: the sTD to check. - */ -static inline bool whc_std_last(struct whc_std *std) -{ - return std->ntds_remaining <= 1; -} - -enum whc_update { - WHC_UPDATE_ADDED = 0x01, - WHC_UPDATE_REMOVED = 0x02, - WHC_UPDATE_UPDATED = 0x04, -}; - -/* init.c */ -int whc_init(struct whc *whc); -void whc_clean_up(struct whc *whc); - -/* hw.c */ -void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); -int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); -void whc_hw_error(struct whc *whc, const char *reason); - -/* wusb.c */ -int whc_wusbhc_start(struct wusbhc *wusbhc); -void whc_wusbhc_stop(struct wusbhc *wusbhc, int delay); -int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - u8 handle, struct wuie_hdr *wuie); -int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle); -int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm); -int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev); -int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots); -int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *ptk, size_t key_size); -int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, - const void *gtk, size_t key_size); -int whc_set_cluster_id(struct whc *whc, u8 bcid); - -/* int.c */ -irqreturn_t whc_int_handler(struct usb_hcd *hcd); -void whc_dn_work(struct work_struct *work); - -/* asl.c */ -void asl_start(struct whc *whc); -void asl_stop(struct whc *whc); -int asl_init(struct whc *whc); -void asl_clean_up(struct whc *whc); -int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); -int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status); -void asl_qset_delete(struct whc *whc, struct whc_qset *qset); -void scan_async_work(struct work_struct *work); - -/* pzl.c */ -int pzl_init(struct whc *whc); -void pzl_clean_up(struct whc *whc); -void pzl_start(struct whc *whc); -void pzl_stop(struct whc *whc); -int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); -int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status); -void pzl_qset_delete(struct whc *whc, struct whc_qset *qset); -void scan_periodic_work(struct work_struct *work); - -/* qset.c */ -struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags); -void qset_free(struct whc *whc, struct whc_qset *qset); -struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags); -void qset_delete(struct whc *whc, struct whc_qset *qset); -void qset_clear(struct whc *whc, struct whc_qset *qset); -void qset_reset(struct whc *whc, struct whc_qset *qset); -int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, - gfp_t mem_flags); -void qset_free_std(struct whc *whc, struct whc_std *std); -void qset_remove_urb(struct whc *whc, struct whc_qset *qset, - struct urb *urb, int status); -void process_halted_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd); -void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, - struct whc_qtd *qtd); -enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset); -void qset_remove_complete(struct whc *whc, struct whc_qset *qset); -void pzl_update(struct whc *whc, uint32_t wusbcmd); -void asl_update(struct whc *whc, uint32_t wusbcmd); - -/* debug.c */ -void whc_dbg_init(struct whc *whc); -void whc_dbg_clean_up(struct whc *whc); - -#endif /* #ifndef __WHCD_H */ diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h deleted file mode 100644 index 5a86a57a80cc..000000000000 --- a/drivers/usb/host/whci/whci-hc.h +++ /dev/null @@ -1,401 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) data structures. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#ifndef _WHCI_WHCI_HC_H -#define _WHCI_WHCI_HC_H - -#include <linux/list.h> - -/** - * WHCI_PAGE_SIZE - page size use by WHCI - * - * WHCI assumes that host system uses pages of 4096 octets. - */ -#define WHCI_PAGE_SIZE 4096 - - -/** - * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single - * qtd. - * - * This is 2^20 - 1. - */ -#define QTD_MAX_XFER_SIZE 1048575 - - -/** - * struct whc_qtd - Queue Element Transfer Descriptors (qTD) - * - * This describes the data for a bulk, control or interrupt transfer. - * - * [WHCI] section 3.2.4 - */ -struct whc_qtd { - __le32 status; /*< remaining transfer len and transfer status */ - __le32 options; - __le64 page_list_ptr; /*< physical pointer to data buffer page list*/ - __u8 setup[8]; /*< setup data for control transfers */ -} __attribute__((packed)); - -#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */ -#define QTD_STS_HALTED (1 << 30) /* transfer halted */ -#define QTD_STS_DBE (1 << 29) /* data buffer error */ -#define QTD_STS_BABBLE (1 << 28) /* babble detected */ -#define QTD_STS_RCE (1 << 27) /* retry count exceeded */ -#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */ -#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */ -#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */ -#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */ -#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */ -#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff) - -#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */ -#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */ - -/** - * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD) - * - * This describes the data and other parameters for an isochronous - * transfer. - * - * [WHCI] section 3.2.5 - */ -struct whc_itd { - __le16 presentation_time; /*< presentation time for OUT transfers */ - __u8 num_segments; /*< number of data segments in segment list */ - __u8 status; /*< command execution status */ - __le32 options; /*< misc transfer options */ - __le64 page_list_ptr; /*< physical pointer to data buffer page list */ - __le64 seg_list_ptr; /*< physical pointer to segment list */ -} __attribute__((packed)); - -#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */ -#define ITD_STS_DBE (1 << 5) /* data buffer error */ -#define ITD_STS_BABBLE (1 << 4) /* babble detected */ -#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */ - -#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */ -#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */ - -/** - * Page list entry. - * - * A TD's page list must contain sufficient page list entries for the - * total data length in the TD. - * - * [WHCI] section 3.2.4.3 - */ -struct whc_page_list_entry { - __le64 buf_ptr; /*< physical pointer to buffer */ -} __attribute__((packed)); - -/** - * struct whc_seg_list_entry - Segment list entry. - * - * Describes a portion of the data buffer described in the containing - * qTD's page list. - * - * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr - * + qtd->seg_list_ptr[seg].offset; - * - * Segments can't cross page boundries. - * - * [WHCI] section 3.2.5.5 - */ -struct whc_seg_list_entry { - __le16 len; /*< segment length */ - __u8 idx; /*< index into page list */ - __u8 status; /*< segment status */ - __le16 offset; /*< 12 bit offset into page */ -} __attribute__((packed)); - -/** - * struct whc_qhead - endpoint and status information for a qset. - * - * [WHCI] section 3.2.6 - */ -struct whc_qhead { - __le64 link; /*< next qset in list */ - __le32 info1; - __le32 info2; - __le32 info3; - __le16 status; - __le16 err_count; /*< transaction error count */ - __le32 cur_window; - __le32 scratch[3]; /*< h/w scratch area */ - union { - struct whc_qtd qtd; - struct whc_itd itd; - } overlay; -} __attribute__((packed)); - -#define QH_LINK_PTR_MASK (~0x03Full) -#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK) -#define QH_LINK_IQS (1 << 4) /* isochronous queue set */ -#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */ -#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */ - -#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */ -#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */ -#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */ -#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */ -#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */ -#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */ -#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */ -#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */ -#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */ -#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */ -#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */ - -#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */ -#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */ -#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */ -#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */ -#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */ -#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */ -#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */ -#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */ - -#define QH_INFO3_TX_RATE(r) ((r) << 24) /* PHY rate (see [ECMA-368] section 10.3.1.1) */ -#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */ - -#define QH_STATUS_FLOW_CTRL (1 << 15) -#define QH_STATUS_ICUR(i) ((i) << 5) -#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) -#define QH_STATUS_SEQ_MASK 0x1f - -/** - * usb_pipe_to_qh_type - USB core pipe type to QH transfer type - * - * Returns the QH type field for a USB core pipe type. - */ -static inline unsigned usb_pipe_to_qh_type(unsigned pipe) -{ - static const unsigned type[] = { - [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC, - [PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT, - [PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL, - [PIPE_BULK] = QH_INFO1_TR_TYPE_BULK, - }; - return type[usb_pipetype(pipe)]; -} - -/** - * Maxiumum number of TDs in a qset. - */ -#define WHCI_QSET_TD_MAX 8 - -/** - * struct whc_qset - WUSB data transfers to a specific endpoint - * @qh: the QHead of this qset - * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt - * transfers) - * @itd: up to 8 iTDs (for qsets for isochronous transfers) - * @qset_dma: DMA address for this qset - * @whc: WHCI HC this qset is for - * @ep: endpoint - * @stds: list of sTDs queued to this qset - * @ntds: number of qTDs queued (not necessarily the same as nTDs - * field in the QH) - * @td_start: index of the first qTD in the list - * @td_end: index of next free qTD in the list (provided - * ntds < WHCI_QSET_TD_MAX) - * - * Queue Sets (qsets) are added to the asynchronous schedule list - * (ASL) or the periodic zone list (PZL). - * - * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate). - * Each TD may refer to at most 1 MiB of data. If a single transfer - * has > 8MiB of data, TDs can be reused as they are completed since - * the TD list is used as a circular buffer. Similarly, several - * (smaller) transfers may be queued in a qset. - * - * WHCI controllers may cache portions of the qsets in the ASL and - * PZL, requiring the WHCD to inform the WHC that the lists have been - * updated (fields changed or qsets inserted or removed). For safe - * insertion and removal of qsets from the lists the schedule must be - * stopped to avoid races in updating the QH link pointers. - * - * Since the HC is free to execute qsets in any order, all transfers - * to an endpoint should use the same qset to ensure transfers are - * executed in the order they're submitted. - * - * [WHCI] section 3.2.3 - */ -struct whc_qset { - struct whc_qhead qh; - union { - struct whc_qtd qtd[WHCI_QSET_TD_MAX]; - struct whc_itd itd[WHCI_QSET_TD_MAX]; - }; - - /* private data for WHCD */ - dma_addr_t qset_dma; - struct whc *whc; - struct usb_host_endpoint *ep; - struct list_head stds; - int ntds; - int td_start; - int td_end; - struct list_head list_node; - unsigned in_sw_list:1; - unsigned in_hw_list:1; - unsigned remove:1; - unsigned reset:1; - struct urb *pause_after_urb; - struct completion remove_complete; - uint16_t max_packet; - uint8_t max_burst; - uint8_t max_seq; -}; - -static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target) -{ - if (target) - *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target); - else - *ptr = QH_LINK_T; -} - -/** - * struct di_buf_entry - Device Information (DI) buffer entry. - * - * There's one of these per connected device. - */ -struct di_buf_entry { - __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */ - __le32 addr_sec_info; /*< addressing and security info */ - __le32 reserved[7]; -} __attribute__((packed)); - -#define WHC_DI_SECURE (1 << 31) -#define WHC_DI_DISABLE (1 << 30) -#define WHC_DI_KEY_IDX(k) ((k) << 8) -#define WHC_DI_KEY_IDX_MASK 0x0000ff00 -#define WHC_DI_DEV_ADDR(a) ((a) << 0) -#define WHC_DI_DEV_ADDR_MASK 0x000000ff - -/** - * struct dn_buf_entry - Device Notification (DN) buffer entry. - * - * [WHCI] section 3.2.8 - */ -struct dn_buf_entry { - __u8 msg_size; /*< number of octets of valid DN data */ - __u8 reserved1; - __u8 src_addr; /*< source address */ - __u8 status; /*< buffer entry status */ - __le32 tkid; /*< TKID for source device, valid if secure bit is set */ - __u8 dn_data[56]; /*< up to 56 octets of DN data */ -} __attribute__((packed)); - -#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */ -#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */ - -#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry)) - -/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of - data. [WHCI] section 2.4.7. */ -#define WHC_GEN_CMD_DATA_LEN 256 - -/* - * HC registers. - * - * [WHCI] section 2.4 - */ - -#define WHCIVERSION 0x00 - -#define WHCSPARAMS 0x04 -# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff) -# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff) -# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f) - -#define WUSBCMD 0x08 -# define WUSBCMD_BCID(b) ((b) << 16) -# define WUSBCMD_BCID_MASK (0xff << 16) -# define WUSBCMD_ASYNC_QSET_RM (1 << 12) -# define WUSBCMD_PERIODIC_QSET_RM (1 << 11) -# define WUSBCMD_WUSBSI(s) ((s) << 8) -# define WUSBCMD_WUSBSI_MASK (0x7 << 8) -# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7) -# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6) -# define WUSBCMD_ASYNC_UPDATED (1 << 5) -# define WUSBCMD_PERIODIC_UPDATED (1 << 4) -# define WUSBCMD_ASYNC_EN (1 << 3) -# define WUSBCMD_PERIODIC_EN (1 << 2) -# define WUSBCMD_WHCRESET (1 << 1) -# define WUSBCMD_RUN (1 << 0) - -#define WUSBSTS 0x0c -# define WUSBSTS_ASYNC_SCHED (1 << 15) -# define WUSBSTS_PERIODIC_SCHED (1 << 14) -# define WUSBSTS_DNTS_SCHED (1 << 13) -# define WUSBSTS_HCHALTED (1 << 12) -# define WUSBSTS_GEN_CMD_DONE (1 << 9) -# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8) -# define WUSBSTS_DNTS_OVERFLOW (1 << 7) -# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6) -# define WUSBSTS_HOST_ERR (1 << 5) -# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4) -# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3) -# define WUSBSTS_DNTS_INT (1 << 2) -# define WUSBSTS_ERR_INT (1 << 1) -# define WUSBSTS_INT (1 << 0) -# define WUSBSTS_INT_MASK 0x3ff - -#define WUSBINTR 0x10 -# define WUSBINTR_GEN_CMD_DONE (1 << 9) -# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8) -# define WUSBINTR_DNTS_OVERFLOW (1 << 7) -# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6) -# define WUSBINTR_HOST_ERR (1 << 5) -# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4) -# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3) -# define WUSBINTR_DNTS_INT (1 << 2) -# define WUSBINTR_ERR_INT (1 << 1) -# define WUSBINTR_INT (1 << 0) -# define WUSBINTR_ALL 0x3ff - -#define WUSBGENCMDSTS 0x14 -# define WUSBGENCMDSTS_ACTIVE (1 << 31) -# define WUSBGENCMDSTS_ERROR (1 << 24) -# define WUSBGENCMDSTS_IOC (1 << 23) -# define WUSBGENCMDSTS_MMCIE_ADD 0x01 -# define WUSBGENCMDSTS_MMCIE_RM 0x02 -# define WUSBGENCMDSTS_SET_MAS 0x03 -# define WUSBGENCMDSTS_CHAN_STOP 0x04 -# define WUSBGENCMDSTS_RWP_EN 0x05 - -#define WUSBGENCMDPARAMS 0x18 -#define WUSBGENADDR 0x20 -#define WUSBASYNCLISTADDR 0x28 -#define WUSBDNTSBUFADDR 0x30 -#define WUSBDEVICEINFOADDR 0x38 - -#define WUSBSETSECKEYCMD 0x40 -# define WUSBSETSECKEYCMD_SET (1 << 31) -# define WUSBSETSECKEYCMD_ERASE (1 << 30) -# define WUSBSETSECKEYCMD_GTK (1 << 8) -# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0) - -#define WUSBTKID 0x44 -#define WUSBSECKEY 0x48 -#define WUSBPERIODICLISTBASE 0x58 -#define WUSBMASINDEX 0x60 - -#define WUSBDNTSCTRL 0x64 -# define WUSBDNTSCTRL_ACTIVE (1 << 31) -# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8) -# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0) - -#define WUSBTIME 0x68 -# define WUSBTIME_CHANNEL_TIME_MASK 0x00ffffff - -#define WUSBBPST 0x6c -#define WUSBDIBUPDATED 0x70 - -#endif /* #ifndef _WHCI_WHCI_HC_H */ diff --git a/drivers/usb/host/whci/wusb.c b/drivers/usb/host/whci/wusb.c deleted file mode 100644 index 8a4d805ff63a..000000000000 --- a/drivers/usb/host/whci/wusb.c +++ /dev/null @@ -1,210 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless Host Controller (WHC) WUSB operations. - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/uwb/umc.h> - -#include "../../wusbcore/wusbhc.h" - -#include "whcd.h" - -static int whc_update_di(struct whc *whc, int idx) -{ - int offset = idx / 32; - u32 bit = 1 << (idx % 32); - - le_writel(bit, whc->base + WUSBDIBUPDATED + offset); - - return whci_wait_for(&whc->umc->dev, - whc->base + WUSBDIBUPDATED + offset, bit, 0, - 100, "DI update"); -} - -/* - * WHCI starts MMCs based on there being a valid GTK so these need - * only start/stop the asynchronous and periodic schedules and send a - * channel stop command. - */ - -int whc_wusbhc_start(struct wusbhc *wusbhc) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - - asl_start(whc); - pzl_start(whc); - - return 0; -} - -void whc_wusbhc_stop(struct wusbhc *wusbhc, int delay) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 stop_time, now_time; - int ret; - - pzl_stop(whc); - asl_stop(whc); - - now_time = le_readl(whc->base + WUSBTIME) & WUSBTIME_CHANNEL_TIME_MASK; - stop_time = (now_time + ((delay * 8) << 7)) & 0x00ffffff; - ret = whc_do_gencmd(whc, WUSBGENCMDSTS_CHAN_STOP, stop_time, NULL, 0); - if (ret == 0) - msleep(delay); -} - -int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - u8 handle, struct wuie_hdr *wuie) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 params; - - params = (interval << 24) - | (repeat_cnt << 16) - | (wuie->bLength << 8) - | handle; - - return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_ADD, params, wuie, wuie->bLength); -} - -int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 params; - - params = handle; - - return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_RM, params, NULL, 0); -} - -int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - - if (stream_index >= 0) - whc_write_wusbcmd(whc, WUSBCMD_WUSBSI_MASK, WUSBCMD_WUSBSI(stream_index)); - - return whc_do_gencmd(whc, WUSBGENCMDSTS_SET_MAS, 0, (void *)mas_bm, sizeof(*mas_bm)); -} - -int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - int idx = wusb_dev->port_idx; - struct di_buf_entry *di = &whc->di_buf[idx]; - int ret; - - mutex_lock(&whc->mutex); - - uwb_mas_bm_copy_le(di->availability_info, &wusb_dev->availability); - di->addr_sec_info &= ~(WHC_DI_DISABLE | WHC_DI_DEV_ADDR_MASK); - di->addr_sec_info |= WHC_DI_DEV_ADDR(wusb_dev->addr); - - ret = whc_update_di(whc, idx); - - mutex_unlock(&whc->mutex); - - return ret; -} - -/* - * Set the number of Device Notification Time Slots (DNTS) and enable - * device notifications. - */ -int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - u32 dntsctrl; - - dntsctrl = WUSBDNTSCTRL_ACTIVE - | WUSBDNTSCTRL_INTERVAL(interval) - | WUSBDNTSCTRL_SLOTS(slots); - - le_writel(dntsctrl, whc->base + WUSBDNTSCTRL); - - return 0; -} - -static int whc_set_key(struct whc *whc, u8 key_index, uint32_t tkid, - const void *key, size_t key_size, bool is_gtk) -{ - uint32_t setkeycmd; - uint32_t seckey[4]; - int i; - int ret; - - memcpy(seckey, key, key_size); - setkeycmd = WUSBSETSECKEYCMD_SET | WUSBSETSECKEYCMD_IDX(key_index); - if (is_gtk) - setkeycmd |= WUSBSETSECKEYCMD_GTK; - - le_writel(tkid, whc->base + WUSBTKID); - for (i = 0; i < 4; i++) - le_writel(seckey[i], whc->base + WUSBSECKEY + 4*i); - le_writel(setkeycmd, whc->base + WUSBSETSECKEYCMD); - - ret = whci_wait_for(&whc->umc->dev, whc->base + WUSBSETSECKEYCMD, - WUSBSETSECKEYCMD_SET, 0, 100, "set key"); - - return ret; -} - -/** - * whc_set_ptk - set the PTK to use for a device. - * - * The index into the key table for this PTK is the same as the - * device's port index. - */ -int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, - const void *ptk, size_t key_size) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - struct di_buf_entry *di = &whc->di_buf[port_idx]; - int ret; - - mutex_lock(&whc->mutex); - - if (ptk) { - ret = whc_set_key(whc, port_idx, tkid, ptk, key_size, false); - if (ret) - goto out; - - di->addr_sec_info &= ~WHC_DI_KEY_IDX_MASK; - di->addr_sec_info |= WHC_DI_SECURE | WHC_DI_KEY_IDX(port_idx); - } else - di->addr_sec_info &= ~WHC_DI_SECURE; - - ret = whc_update_di(whc, port_idx); -out: - mutex_unlock(&whc->mutex); - return ret; -} - -/** - * whc_set_gtk - set the GTK for subsequent broadcast packets - * - * The GTK is stored in the last entry in the key table (the previous - * N_DEVICES entries are for the per-device PTKs). - */ -int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, - const void *gtk, size_t key_size) -{ - struct whc *whc = wusbhc_to_whc(wusbhc); - int ret; - - mutex_lock(&whc->mutex); - - ret = whc_set_key(whc, whc->n_devices, tkid, gtk, key_size, true); - - mutex_unlock(&whc->mutex); - - return ret; -} - -int whc_set_cluster_id(struct whc *whc, u8 bcid) -{ - whc_write_wusbcmd(whc, WUSBCMD_BCID_MASK, WUSBCMD_BCID(bcid)); - return 0; -} diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 52e32644a4b2..93e2cca5262d 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -22,7 +22,6 @@ dbc_dma_alloc_coherent(struct xhci_hcd *xhci, size_t size, vaddr = dma_alloc_coherent(xhci_to_hcd(xhci)->self.sysdev, size, dma_handle, flags); - memset(vaddr, 0, size); return vaddr; } diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index aff79ff5aba4..be726c791323 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -139,14 +139,14 @@ xhci_dbc_alloc_requests(struct dbc_ep *dep, struct list_head *head, struct dbc_request *req; for (i = 0; i < DBC_QUEUE_SIZE; i++) { - req = dbc_alloc_request(dep, GFP_ATOMIC); + req = dbc_alloc_request(dep, GFP_KERNEL); if (!req) break; req->length = DBC_MAX_PACKET; req->buf = kmalloc(req->length, GFP_KERNEL); if (!req->buf) { - xhci_dbc_free_req(dep, req); + dbc_free_request(dep, req); break; } diff --git a/drivers/usb/host/xhci-ext-caps.c b/drivers/usb/host/xhci-ext-caps.c index 399113f9fc5c..f498160df969 100644 --- a/drivers/usb/host/xhci-ext-caps.c +++ b/drivers/usb/host/xhci-ext-caps.c @@ -6,11 +6,20 @@ */ #include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/pci.h> #include "xhci.h" #define USB_SW_DRV_NAME "intel_xhci_usb_sw" #define USB_SW_RESOURCE_SIZE 0x400 +#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 + +static const struct property_entry role_switch_props[] = { + PROPERTY_ENTRY_BOOL("sw_switch_disable"), + {}, +}; + static void xhci_intel_unregister_pdev(void *arg) { platform_device_unregister(arg); @@ -21,6 +30,7 @@ static int xhci_create_intel_xhci_sw_pdev(struct xhci_hcd *xhci, u32 cap_offset) struct usb_hcd *hcd = xhci_to_hcd(xhci); struct device *dev = hcd->self.controller; struct platform_device *pdev; + struct pci_dev *pci = to_pci_dev(dev); struct resource res = { 0, }; int ret; @@ -43,6 +53,14 @@ static int xhci_create_intel_xhci_sw_pdev(struct xhci_hcd *xhci, u32 cap_offset) return ret; } + if (pci->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { + ret = platform_device_add_properties(pdev, role_switch_props); + if (ret) { + dev_err(dev, "failed to register device properties\n"); + return ret; + } + } + pdev->dev.parent = dev; ret = platform_device_add(pdev); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 3abe70ff1b1e..b7d23c438756 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1149,7 +1149,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } port_li = readl(ports[wIndex]->addr + PORTLI); status = xhci_get_ext_port_status(temp, port_li); - put_unaligned_le32(cpu_to_le32(status), &buf[4]); + put_unaligned_le32(status, &buf[4]); } break; case SetPortFeature: diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index cf5e17962179..e16eda6e2b8b 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2399,7 +2399,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) flags); if (!xhci->dcbaa) goto fail; - memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa)); xhci->dcbaa->dma = dma; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Device context base array address = 0x%llx (DMA), %p (virt)", diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 026fe18972d3..b18a6baef204 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -216,6 +216,10 @@ static int xhci_mtk_clks_get(struct xhci_hcd_mtk *mtk) return PTR_ERR(mtk->sys_clk); } + mtk->xhci_clk = devm_clk_get_optional(dev, "xhci_ck"); + if (IS_ERR(mtk->xhci_clk)) + return PTR_ERR(mtk->xhci_clk); + mtk->ref_clk = devm_clk_get_optional(dev, "ref_ck"); if (IS_ERR(mtk->ref_clk)) return PTR_ERR(mtk->ref_clk); @@ -244,6 +248,12 @@ static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk) goto sys_clk_err; } + ret = clk_prepare_enable(mtk->xhci_clk); + if (ret) { + dev_err(mtk->dev, "failed to enable xhci_clk\n"); + goto xhci_clk_err; + } + ret = clk_prepare_enable(mtk->mcu_clk); if (ret) { dev_err(mtk->dev, "failed to enable mcu_clk\n"); @@ -261,6 +271,8 @@ static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk) dma_clk_err: clk_disable_unprepare(mtk->mcu_clk); mcu_clk_err: + clk_disable_unprepare(mtk->xhci_clk); +xhci_clk_err: clk_disable_unprepare(mtk->sys_clk); sys_clk_err: clk_disable_unprepare(mtk->ref_clk); @@ -272,6 +284,7 @@ static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk) { clk_disable_unprepare(mtk->dma_clk); clk_disable_unprepare(mtk->mcu_clk); + clk_disable_unprepare(mtk->xhci_clk); clk_disable_unprepare(mtk->sys_clk); clk_disable_unprepare(mtk->ref_clk); } diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index 8be8c5f7ff62..5ac458b7d2e0 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -139,6 +139,7 @@ struct xhci_hcd_mtk { struct regulator *vusb33; struct regulator *vbus; struct clk *sys_clk; /* sys and mac clock */ + struct clk *xhci_clk; struct clk *ref_clk; struct clk *mcu_clk; struct clk *dma_clk; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 998241f5fce3..d90cd5ec09cf 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -66,12 +66,14 @@ static int xhci_priv_resume_quirk(struct usb_hcd *hcd) static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) { + struct xhci_plat_priv *priv = xhci_to_priv(xhci); + /* * As of now platform drivers don't provide MSI support so we ensure * here that the generic code does not try to make a pci_dev from our * dev struct in order to setup MSI */ - xhci->quirks |= XHCI_PLAT; + xhci->quirks |= XHCI_PLAT | priv->quirks; } /* called during probe() after chip reset completes */ @@ -103,17 +105,11 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { }; static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { - .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, - .init_quirk = xhci_rcar_init_quirk, - .plat_start = xhci_rcar_start, - .resume_quirk = xhci_rcar_resume_quirk, + SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1) }; static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { - .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3, - .init_quirk = xhci_rcar_init_quirk, - .plat_start = xhci_rcar_start, - .resume_quirk = xhci_rcar_resume_quirk, + SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3) }; static const struct of_device_id usb_xhci_of_match[] = { @@ -307,7 +303,6 @@ static int xhci_plat_probe(struct platform_device *pdev) ret = usb_phy_init(hcd->usb_phy); if (ret) goto put_usb3_hcd; - hcd->skip_phy_initialization = 1; } hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h index ae29f22ff5bd..5681723fc9cd 100644 --- a/drivers/usb/host/xhci-plat.h +++ b/drivers/usb/host/xhci-plat.h @@ -12,10 +12,12 @@ struct xhci_plat_priv { const char *firmware_name; + unsigned long long quirks; void (*plat_start)(struct usb_hcd *); int (*init_quirk)(struct usb_hcd *); int (*resume_quirk)(struct usb_hcd *); }; #define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv) +#define xhci_to_priv(x) ((struct xhci_plat_priv *)(x)->priv) #endif /* _XHCI_PLAT_H */ diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 8616c52849c6..c1025d321a41 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -104,16 +104,7 @@ static int xhci_rcar_is_gen2(struct device *dev) return of_device_is_compatible(node, "renesas,xhci-r8a7790") || of_device_is_compatible(node, "renesas,xhci-r8a7791") || of_device_is_compatible(node, "renesas,xhci-r8a7793") || - of_device_is_compatible(node, "renensas,rcar-gen2-xhci"); -} - -static int xhci_rcar_is_gen3(struct device *dev) -{ - struct device_node *node = dev->of_node; - - return of_device_is_compatible(node, "renesas,xhci-r8a7795") || - of_device_is_compatible(node, "renesas,xhci-r8a7796") || - of_device_is_compatible(node, "renesas,rcar-gen3-xhci"); + of_device_is_compatible(node, "renesas,rcar-gen2-xhci"); } void xhci_rcar_start(struct usb_hcd *hcd) @@ -226,32 +217,13 @@ static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd) /* This function needs to initialize a "phy" of usb before */ int xhci_rcar_init_quirk(struct usb_hcd *hcd) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - /* If hcd->regs is NULL, we don't just call the following function */ if (!hcd->regs) return 0; - /* - * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set - * to 1. However, these SoCs don't support 64-bit address memory - * pointers. So, this driver clears the AC64 bit of xhci->hcc_params - * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in - * xhci_gen_setup(). - * - * And, since the firmware/internal CPU control the USBSTS.STS_HALT - * and the process speed is down when the roothub port enters U3, - * long delay for the handshake of STS_HALT is neeed in xhci_suspend(). - */ - if (xhci_rcar_is_gen2(hcd->self.controller) || - xhci_rcar_is_gen3(hcd->self.controller)) { - xhci->quirks |= XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND; - } - if (!xhci_rcar_wait_for_pll_active(hcd)) return -ETIMEDOUT; - xhci->quirks |= XHCI_TRUST_TX_LENGTH; return xhci_rcar_download_firmware(hcd); } diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h index 804b6ab4246f..012744a63a49 100644 --- a/drivers/usb/host/xhci-rcar.h +++ b/drivers/usb/host/xhci-rcar.h @@ -31,4 +31,25 @@ static inline int xhci_rcar_resume_quirk(struct usb_hcd *hcd) return 0; } #endif + +/* + * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set + * to 1. However, these SoCs don't support 64-bit address memory + * pointers. So, this driver clears the AC64 bit of xhci->hcc_params + * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in + * xhci_gen_setup() by using the XHCI_NO_64BIT_SUPPORT quirk. + * + * And, since the firmware/internal CPU control the USBSTS.STS_HALT + * and the process speed is down when the roothub port enters U3, + * long delay for the handshake of STS_HALT is neeed in xhci_suspend() + * by using the XHCI_SLOW_SUSPEND quirk. + */ +#define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware) \ + .firmware_name = firmware, \ + .quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH | \ + XHCI_SLOW_SUSPEND, \ + .init_quirk = xhci_rcar_init_quirk, \ + .plat_start = xhci_rcar_start, \ + .resume_quirk = xhci_rcar_resume_quirk, + #endif /* _XHCI_RCAR_H */ diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index dafc65911fc0..2ff7c911fbd0 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1194,6 +1194,16 @@ static int tegra_xusb_probe(struct platform_device *pdev) tegra_xusb_config(tegra, regs); + /* + * The XUSB Falcon microcontroller can only address 40 bits, so set + * the DMA mask accordingly. + */ + err = dma_set_mask_and_coherent(tegra->dev, DMA_BIT_MASK(40)); + if (err < 0) { + dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err); + goto put_rpm; + } + err = tegra_xusb_load_firmware(tegra); if (err < 0) { dev_err(&pdev->dev, "failed to load firmware: %d\n", err); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 03d1e552769b..500865975687 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3814,7 +3814,6 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) virt_dev->eps[i].ep_state &= ~EP_STOP_CMD_PENDING; del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); } - xhci_debugfs_remove_slot(xhci, udev->slot_id); virt_dev->udev = NULL; ret = xhci_disable_slot(xhci, udev->slot_id); if (ret) @@ -3832,6 +3831,8 @@ int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id) if (!command) return -ENOMEM; + xhci_debugfs_remove_slot(xhci, slot_id); + spin_lock_irqsave(&xhci->lock, flags); /* Don't disable the slot if the host controller is dead. */ state = readl(&xhci->op_regs->status); @@ -5217,7 +5218,7 @@ static const struct hc_driver xhci_hc_driver = { * generic hardware linkage */ .irq = xhci_irq, - .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED, + .flags = HCD_MEMORY | HCD_DMA | HCD_USB3 | HCD_SHARED, /* * basic lifecycle operations diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index f5c41448d067..f9f88626a57a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2337,12 +2337,13 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, break; case TRB_RESET_EP: sprintf(str, - "%s: ctx %08x%08x slot %d ep %d flags %c", + "%s: ctx %08x%08x slot %d ep %d flags %c:%c", xhci_trb_type_string(type), field1, field0, TRB_TO_SLOT_ID(field3), /* Macro decrements 1, maybe it shouldn't?!? */ TRB_TO_EP_INDEX(field3) + 1, + field3 & TRB_TSP ? 'T' : 't', field3 & TRB_CYCLE ? 'C' : 'c'); break; case TRB_STOP_RING: diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c index 55b94fd10331..fdeb4cf97cc5 100644 --- a/drivers/usb/isp1760/isp1760-core.c +++ b/drivers/usb/isp1760/isp1760-core.c @@ -120,9 +120,6 @@ int isp1760_register(struct resource *mem, int irq, unsigned long irqflags, (!IS_ENABLED(CONFIG_USB_ISP1761_UDC) || udc_disabled)) return -ENODEV; - /* prevent usb-core allocating DMA pages */ - dev->dma_mask = NULL; - isp = devm_kzalloc(dev, sizeof(*isp), GFP_KERNEL); if (!isp) return -ENOMEM; diff --git a/drivers/usb/isp1760/isp1760-if.c b/drivers/usb/isp1760/isp1760-if.c index 241a00d75027..07cc82ff327c 100644 --- a/drivers/usb/isp1760/isp1760-if.c +++ b/drivers/usb/isp1760/isp1760-if.c @@ -139,7 +139,6 @@ static int isp1761_pci_probe(struct pci_dev *dev, pci_set_master(dev); - dev->dev.dma_mask = NULL; ret = isp1760_register(&dev->resource[3], dev->irq, 0, &dev->dev, devflags); if (ret < 0) diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index 9d780b77314b..14faec51d7a5 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -183,6 +183,7 @@ static ssize_t port0_show(struct device *dev, { return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0); } +static DEVICE_ATTR_RW(port0); /* attribute callback handler (read) */ static ssize_t port1_show(struct device *dev, @@ -190,11 +191,14 @@ static ssize_t port1_show(struct device *dev, { return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1); } - -static DEVICE_ATTR_RW(port0); - static DEVICE_ATTR_RW(port1); +static struct attribute *cypress_attrs[] = { + &dev_attr_port0.attr, + &dev_attr_port1.attr, + NULL, +}; +ATTRIBUTE_GROUPS(cypress); static int cypress_probe(struct usb_interface *interface, const struct usb_device_id *id) @@ -212,26 +216,11 @@ static int cypress_probe(struct usb_interface *interface, /* save our data pointer in this interface device */ usb_set_intfdata(interface, dev); - /* create device attribute files */ - retval = device_create_file(&interface->dev, &dev_attr_port0); - if (retval) - goto error; - retval = device_create_file(&interface->dev, &dev_attr_port1); - if (retval) - goto error; - /* let the user know that the device is now attached */ dev_info(&interface->dev, "Cypress CY7C63xxx device now attached\n"); return 0; -error: - device_remove_file(&interface->dev, &dev_attr_port0); - device_remove_file(&interface->dev, &dev_attr_port1); - usb_set_intfdata(interface, NULL); - usb_put_dev(dev->udev); - kfree(dev); - error_mem: return retval; } @@ -242,9 +231,6 @@ static void cypress_disconnect(struct usb_interface *interface) dev = usb_get_intfdata(interface); - /* remove device attribute files */ - device_remove_file(&interface->dev, &dev_attr_port0); - device_remove_file(&interface->dev, &dev_attr_port1); /* the intfdata can be set to NULL only after the * device files have been removed */ usb_set_intfdata(interface, NULL); @@ -262,6 +248,7 @@ static struct usb_driver cypress_driver = { .probe = cypress_probe, .disconnect = cypress_disconnect, .id_table = cypress_table, + .dev_groups = cypress_groups, }; module_usb_driver(cypress_driver); diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c index 8b15ab5e1450..3e3802aaefa3 100644 --- a/drivers/usb/misc/cytherm.c +++ b/drivers/usb/misc/cytherm.c @@ -36,20 +36,6 @@ struct usb_cytherm { }; -/* local function prototypes */ -static int cytherm_probe(struct usb_interface *interface, - const struct usb_device_id *id); -static void cytherm_disconnect(struct usb_interface *interface); - - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver cytherm_driver = { - .name = "cytherm", - .probe = cytherm_probe, - .disconnect = cytherm_disconnect, - .id_table = id_table, -}; - /* Vendor requests */ /* They all operate on one byte at a time */ #define PING 0x00 @@ -304,6 +290,15 @@ static ssize_t port1_store(struct device *dev, struct device_attribute *attr, co } static DEVICE_ATTR_RW(port1); +static struct attribute *cytherm_attrs[] = { + &dev_attr_brightness.attr, + &dev_attr_temp.attr, + &dev_attr_button.attr, + &dev_attr_port0.attr, + &dev_attr_port1.attr, + NULL, +}; +ATTRIBUTE_GROUPS(cytherm); static int cytherm_probe(struct usb_interface *interface, const struct usb_device_id *id) @@ -322,34 +317,10 @@ static int cytherm_probe(struct usb_interface *interface, dev->brightness = 0xFF; - retval = device_create_file(&interface->dev, &dev_attr_brightness); - if (retval) - goto error; - retval = device_create_file(&interface->dev, &dev_attr_temp); - if (retval) - goto error; - retval = device_create_file(&interface->dev, &dev_attr_button); - if (retval) - goto error; - retval = device_create_file(&interface->dev, &dev_attr_port0); - if (retval) - goto error; - retval = device_create_file(&interface->dev, &dev_attr_port1); - if (retval) - goto error; - dev_info (&interface->dev, "Cypress thermometer device now attached\n"); return 0; -error: - device_remove_file(&interface->dev, &dev_attr_brightness); - device_remove_file(&interface->dev, &dev_attr_temp); - device_remove_file(&interface->dev, &dev_attr_button); - device_remove_file(&interface->dev, &dev_attr_port0); - device_remove_file(&interface->dev, &dev_attr_port1); - usb_set_intfdata (interface, NULL); - usb_put_dev(dev->udev); - kfree(dev); + error_mem: return retval; } @@ -360,12 +331,6 @@ static void cytherm_disconnect(struct usb_interface *interface) dev = usb_get_intfdata (interface); - device_remove_file(&interface->dev, &dev_attr_brightness); - device_remove_file(&interface->dev, &dev_attr_temp); - device_remove_file(&interface->dev, &dev_attr_button); - device_remove_file(&interface->dev, &dev_attr_port0); - device_remove_file(&interface->dev, &dev_attr_port1); - /* first remove the files, then NULL the pointer */ usb_set_intfdata (interface, NULL); @@ -376,6 +341,15 @@ static void cytherm_disconnect(struct usb_interface *interface) dev_info(&interface->dev, "Cypress thermometer now disconnected\n"); } +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver cytherm_driver = { + .name = "cytherm", + .probe = cytherm_probe, + .disconnect = cytherm_disconnect, + .id_table = id_table, + .dev_groups = cytherm_groups, +}; + module_usb_driver(cytherm_driver); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c index e5c03c6d16e9..407fe7570f3b 100644 --- a/drivers/usb/misc/lvstest.c +++ b/drivers/usb/misc/lvstest.c @@ -310,7 +310,7 @@ static ssize_t enable_compliance_store(struct device *dev, } static DEVICE_ATTR_WO(enable_compliance); -static struct attribute *lvs_attributes[] = { +static struct attribute *lvs_attrs[] = { &dev_attr_get_dev_desc.attr, &dev_attr_u1_timeout.attr, &dev_attr_u2_timeout.attr, @@ -321,10 +321,7 @@ static struct attribute *lvs_attributes[] = { &dev_attr_enable_compliance.attr, NULL }; - -static const struct attribute_group lvs_attr_group = { - .attrs = lvs_attributes, -}; +ATTRIBUTE_GROUPS(lvs); static void lvs_rh_work(struct work_struct *work) { @@ -439,12 +436,6 @@ static int lvs_rh_probe(struct usb_interface *intf, INIT_WORK(&lvs->rh_work, lvs_rh_work); - ret = sysfs_create_group(&intf->dev.kobj, &lvs_attr_group); - if (ret < 0) { - dev_err(&intf->dev, "Failed to create sysfs node %d\n", ret); - goto free_urb; - } - pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress); maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe)); usb_fill_int_urb(lvs->urb, hdev, pipe, &lvs->buffer[0], maxp, @@ -453,13 +444,11 @@ static int lvs_rh_probe(struct usb_interface *intf, ret = usb_submit_urb(lvs->urb, GFP_KERNEL); if (ret < 0) { dev_err(&intf->dev, "couldn't submit lvs urb %d\n", ret); - goto sysfs_remove; + goto free_urb; } return ret; -sysfs_remove: - sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group); free_urb: usb_free_urb(lvs->urb); return ret; @@ -469,7 +458,6 @@ static void lvs_rh_disconnect(struct usb_interface *intf) { struct lvs_rh *lvs = usb_get_intfdata(intf); - sysfs_remove_group(&intf->dev.kobj, &lvs_attr_group); usb_poison_urb(lvs->urb); /* used in scheduled work */ flush_work(&lvs->rh_work); usb_free_urb(lvs->urb); @@ -479,6 +467,7 @@ static struct usb_driver lvs_driver = { .name = "lvs", .probe = lvs_rh_probe, .disconnect = lvs_rh_disconnect, + .dev_groups = lvs_groups, }; module_usb_driver(lvs_driver); diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index a32d61a79ab8..30cae5e1954d 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -51,7 +51,6 @@ struct rio_usb_data { char *obuf, *ibuf; /* transfer buffers */ char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */ wait_queue_head_t wait_q; /* for timeouts */ - struct mutex lock; /* general race avoidance */ }; static DEFINE_MUTEX(rio500_mutex); @@ -63,10 +62,8 @@ static int open_rio(struct inode *inode, struct file *file) /* against disconnect() */ mutex_lock(&rio500_mutex); - mutex_lock(&(rio->lock)); if (rio->isopen || !rio->present) { - mutex_unlock(&(rio->lock)); mutex_unlock(&rio500_mutex); return -EBUSY; } @@ -74,7 +71,6 @@ static int open_rio(struct inode *inode, struct file *file) init_waitqueue_head(&rio->wait_q); - mutex_unlock(&(rio->lock)); dev_info(&rio->rio_dev->dev, "Rio opened.\n"); mutex_unlock(&rio500_mutex); @@ -88,7 +84,6 @@ static int close_rio(struct inode *inode, struct file *file) /* against disconnect() */ mutex_lock(&rio500_mutex); - mutex_lock(&(rio->lock)); rio->isopen = 0; if (!rio->present) { @@ -100,7 +95,6 @@ static int close_rio(struct inode *inode, struct file *file) } else { dev_info(&rio->rio_dev->dev, "Rio closed.\n"); } - mutex_unlock(&(rio->lock)); mutex_unlock(&rio500_mutex); return 0; } @@ -115,7 +109,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) int retries; int retval=0; - mutex_lock(&(rio->lock)); + mutex_lock(&rio500_mutex); /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { retval = -ENODEV; @@ -259,7 +253,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) err_out: - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return retval; } @@ -279,12 +273,12 @@ write_rio(struct file *file, const char __user *buffer, int errn = 0; int intr; - intr = mutex_lock_interruptible(&(rio->lock)); + intr = mutex_lock_interruptible(&rio500_mutex); if (intr) return -EINTR; /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return -ENODEV; } @@ -307,7 +301,7 @@ write_rio(struct file *file, const char __user *buffer, goto error; } if (signal_pending(current)) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return bytes_written ? bytes_written : -EINTR; } @@ -345,12 +339,12 @@ write_rio(struct file *file, const char __user *buffer, buffer += copy_size; } while (count > 0); - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return bytes_written ? bytes_written : -EIO; error: - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return errn; } @@ -367,12 +361,12 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) char *ibuf; int intr; - intr = mutex_lock_interruptible(&(rio->lock)); + intr = mutex_lock_interruptible(&rio500_mutex); if (intr) return -EINTR; /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return -ENODEV; } @@ -383,11 +377,11 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) while (count > 0) { if (signal_pending(current)) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return read_count ? read_count : -EINTR; } if (!rio->rio_dev) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return -ENODEV; } this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count; @@ -405,7 +399,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) count = this_read = partial; } else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */ if (!maxretry--) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); dev_err(&rio->rio_dev->dev, "read_rio: maxretry timeout\n"); return -ETIME; @@ -415,19 +409,19 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) finish_wait(&rio->wait_q, &wait); continue; } else if (result != -EREMOTEIO) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); dev_err(&rio->rio_dev->dev, "Read Whoops - result:%d partial:%u this_read:%u\n", result, partial, this_read); return -EIO; } else { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return (0); } if (this_read) { if (copy_to_user(buffer, ibuf, this_read)) { - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return -EFAULT; } count -= this_read; @@ -435,7 +429,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) buffer += this_read; } } - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); return read_count; } @@ -460,53 +454,55 @@ static int probe_rio(struct usb_interface *intf, { struct usb_device *dev = interface_to_usbdev(intf); struct rio_usb_data *rio = &rio_instance; - int retval = 0; + int retval = -ENOMEM; + char *ibuf, *obuf; - mutex_lock(&rio500_mutex); if (rio->present) { dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum); - retval = -EBUSY; - goto bail_out; - } else { - dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum); + return -EBUSY; } + dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum); - retval = usb_register_dev(intf, &usb_rio_class); - if (retval) { - dev_err(&dev->dev, - "Not able to get a minor for this device.\n"); - retval = -ENOMEM; - goto bail_out; - } - - rio->rio_dev = dev; - - if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) { + obuf = kmalloc(OBUF_SIZE, GFP_KERNEL); + if (!obuf) { dev_err(&dev->dev, "probe_rio: Not enough memory for the output buffer\n"); - usb_deregister_dev(intf, &usb_rio_class); - retval = -ENOMEM; - goto bail_out; + goto err_obuf; } - dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf); + dev_dbg(&intf->dev, "obuf address: %p\n", obuf); - if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) { + ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL); + if (!ibuf) { dev_err(&dev->dev, "probe_rio: Not enough memory for the input buffer\n"); - usb_deregister_dev(intf, &usb_rio_class); - kfree(rio->obuf); - retval = -ENOMEM; - goto bail_out; + goto err_ibuf; } - dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf); - - mutex_init(&(rio->lock)); + dev_dbg(&intf->dev, "ibuf address: %p\n", ibuf); - usb_set_intfdata (intf, rio); + mutex_lock(&rio500_mutex); + rio->rio_dev = dev; + rio->ibuf = ibuf; + rio->obuf = obuf; rio->present = 1; -bail_out: mutex_unlock(&rio500_mutex); + retval = usb_register_dev(intf, &usb_rio_class); + if (retval) { + dev_err(&dev->dev, + "Not able to get a minor for this device.\n"); + goto err_register; + } + + usb_set_intfdata(intf, rio); + return retval; + + err_register: + mutex_lock(&rio500_mutex); + rio->present = 0; + mutex_unlock(&rio500_mutex); + err_ibuf: + kfree(obuf); + err_obuf: return retval; } @@ -515,16 +511,14 @@ static void disconnect_rio(struct usb_interface *intf) struct rio_usb_data *rio = usb_get_intfdata (intf); usb_set_intfdata (intf, NULL); - mutex_lock(&rio500_mutex); if (rio) { usb_deregister_dev(intf, &usb_rio_class); - mutex_lock(&(rio->lock)); + mutex_lock(&rio500_mutex); if (rio->isopen) { rio->isopen = 0; /* better let it finish - the release will do whats needed */ rio->rio_dev = NULL; - mutex_unlock(&(rio->lock)); mutex_unlock(&rio500_mutex); return; } @@ -534,9 +528,8 @@ static void disconnect_rio(struct usb_interface *intf) dev_info(&intf->dev, "USB Rio disconnected.\n"); rio->present = 0; - mutex_unlock(&(rio->lock)); + mutex_unlock(&rio500_mutex); } - mutex_unlock(&rio500_mutex); } static const struct usb_device_id rio_table[] = { diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c index ac357ce2d1a6..a3dfc77578ea 100644 --- a/drivers/usb/misc/trancevibrator.c +++ b/drivers/usb/misc/trancevibrator.c @@ -71,9 +71,14 @@ static ssize_t speed_store(struct device *dev, struct device_attribute *attr, } return count; } - static DEVICE_ATTR_RW(speed); +static struct attribute *tv_attrs[] = { + &dev_attr_speed.attr, + NULL, +}; +ATTRIBUTE_GROUPS(tv); + static int tv_probe(struct usb_interface *interface, const struct usb_device_id *id) { @@ -89,15 +94,9 @@ static int tv_probe(struct usb_interface *interface, dev->udev = usb_get_dev(udev); usb_set_intfdata(interface, dev); - retval = device_create_file(&interface->dev, &dev_attr_speed); - if (retval) - goto error_create_file; return 0; -error_create_file: - usb_put_dev(udev); - usb_set_intfdata(interface, NULL); error: kfree(dev); return retval; @@ -108,7 +107,6 @@ static void tv_disconnect(struct usb_interface *interface) struct trancevibrator *dev; dev = usb_get_intfdata (interface); - device_remove_file(&interface->dev, &dev_attr_speed); usb_set_intfdata(interface, NULL); usb_put_dev(dev->udev); kfree(dev); @@ -120,6 +118,7 @@ static struct usb_driver tv_driver = { .probe = tv_probe, .disconnect = tv_disconnect, .id_table = id_table, + .dev_groups = tv_groups, }; module_usb_driver(tv_driver); diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c index 1923d5b6d9c9..551074f5b7ad 100644 --- a/drivers/usb/misc/usbsevseg.c +++ b/drivers/usb/misc/usbsevseg.c @@ -316,7 +316,7 @@ MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered); MYDEV_ATTR_SIMPLE_UNSIGNED(mode_msb, update_display_mode); MYDEV_ATTR_SIMPLE_UNSIGNED(mode_lsb, update_display_mode); -static struct attribute *dev_attrs[] = { +static struct attribute *sevseg_attrs[] = { &dev_attr_powered.attr, &dev_attr_text.attr, &dev_attr_textmode.attr, @@ -325,10 +325,7 @@ static struct attribute *dev_attrs[] = { &dev_attr_mode_lsb.attr, NULL }; - -static const struct attribute_group dev_attr_grp = { - .attrs = dev_attrs, -}; +ATTRIBUTE_GROUPS(sevseg); static int sevseg_probe(struct usb_interface *interface, const struct usb_device_id *id) @@ -354,17 +351,9 @@ static int sevseg_probe(struct usb_interface *interface, mydev->mode_msb = 0x06; /* 6 characters */ mydev->mode_lsb = 0x3f; /* scanmode for 6 chars */ - rc = sysfs_create_group(&interface->dev.kobj, &dev_attr_grp); - if (rc) - goto error; - dev_info(&interface->dev, "USB 7 Segment device now attached\n"); return 0; -error: - usb_set_intfdata(interface, NULL); - usb_put_dev(mydev->udev); - kfree(mydev); error_mem: return rc; } @@ -374,7 +363,6 @@ static void sevseg_disconnect(struct usb_interface *interface) struct usb_sevsegdev *mydev; mydev = usb_get_intfdata(interface); - sysfs_remove_group(&interface->dev.kobj, &dev_attr_grp); usb_set_intfdata(interface, NULL); usb_put_dev(mydev->udev); kfree(mydev); @@ -423,6 +411,7 @@ static struct usb_driver sevseg_driver = { .resume = sevseg_resume, .reset_resume = sevseg_reset_resume, .id_table = id_table, + .dev_groups = sevseg_groups, .supports_autosuspend = 1, }; diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig index 928c2cd6fc00..bf98fd36341d 100644 --- a/drivers/usb/mtu3/Kconfig +++ b/drivers/usb/mtu3/Kconfig @@ -44,6 +44,7 @@ config USB_MTU3_DUAL_ROLE bool "Dual Role mode" depends on ((USB=y || USB=USB_MTU3) && (USB_GADGET=y || USB_GADGET=USB_MTU3)) depends on (EXTCON=y || EXTCON=USB_MTU3) + select USB_ROLE_SWITCH help This is the default mode of working of MTU3 controller where both host and gadget features are enabled. diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h index 76ecf12fdf62..6087be236a35 100644 --- a/drivers/usb/mtu3/mtu3.h +++ b/drivers/usb/mtu3/mtu3.h @@ -199,6 +199,9 @@ struct mtu3_gpd_ring { * @id_nb : notifier for iddig(idpin) detection * @id_work : work of iddig detection notifier * @id_event : event of iddig detecion notifier +* @role_sw : use USB Role Switch to support dual-role switch, can't use +* extcon at the same time, and extcon is deprecated. +* @role_sw_used : true when the USB Role Switch is used. * @is_u3_drd: whether port0 supports usb3.0 dual-role device or not * @manual_drd_enabled: it's true when supports dual-role device by debugfs * to switch host/device modes depending on user input. @@ -212,6 +215,8 @@ struct otg_switch_mtk { struct notifier_block id_nb; struct work_struct id_work; unsigned long id_event; + struct usb_role_switch *role_sw; + bool role_sw_used; bool is_u3_drd; bool manual_drd_enabled; }; diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index f8bd1d57e795..c3d5c1206eec 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -835,10 +835,8 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb) return -ENOMEM; mtu->irq = platform_get_irq(pdev, 0); - if (mtu->irq < 0) { - dev_err(dev, "fail to get irq number\n"); + if (mtu->irq < 0) return mtu->irq; - } dev_info(dev, "irq %d\n", mtu->irq); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac"); diff --git a/drivers/usb/mtu3/mtu3_debugfs.c b/drivers/usb/mtu3/mtu3_debugfs.c index 62c57ddc554e..c96e5dab0a48 100644 --- a/drivers/usb/mtu3/mtu3_debugfs.c +++ b/drivers/usb/mtu3/mtu3_debugfs.c @@ -453,9 +453,9 @@ static ssize_t ssusb_mode_write(struct file *file, const char __user *ubuf, return -EFAULT; if (!strncmp(buf, "host", 4) && !ssusb->is_host) { - ssusb_mode_manual_switch(ssusb, 1); + ssusb_mode_switch(ssusb, 1); } else if (!strncmp(buf, "device", 6) && ssusb->is_host) { - ssusb_mode_manual_switch(ssusb, 0); + ssusb_mode_switch(ssusb, 0); } else { dev_err(ssusb->dev, "wrong or duplicated setting\n"); return -EINVAL; diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c index 5fcb71af875a..08e18448e8b8 100644 --- a/drivers/usb/mtu3/mtu3_dr.c +++ b/drivers/usb/mtu3/mtu3_dr.c @@ -7,6 +7,8 @@ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> */ +#include <linux/usb/role.h> + #include "mtu3.h" #include "mtu3_dr.h" #include "mtu3_debug.h" @@ -280,7 +282,7 @@ static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx) * This is useful in special cases, such as uses TYPE-A receptacle but also * wants to support dual-role mode. */ -void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host) +void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host) { struct otg_switch_mtk *otg_sx = &ssusb->otg_switch; @@ -318,6 +320,47 @@ void ssusb_set_force_mode(struct ssusb_mtk *ssusb, mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value); } +static int ssusb_role_sw_set(struct device *dev, enum usb_role role) +{ + struct ssusb_mtk *ssusb = dev_get_drvdata(dev); + bool to_host = false; + + if (role == USB_ROLE_HOST) + to_host = true; + + if (to_host ^ ssusb->is_host) + ssusb_mode_switch(ssusb, to_host); + + return 0; +} + +static enum usb_role ssusb_role_sw_get(struct device *dev) +{ + struct ssusb_mtk *ssusb = dev_get_drvdata(dev); + enum usb_role role; + + role = ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE; + + return role; +} + +static int ssusb_role_sw_register(struct otg_switch_mtk *otg_sx) +{ + struct usb_role_switch_desc role_sx_desc = { 0 }; + struct ssusb_mtk *ssusb = + container_of(otg_sx, struct ssusb_mtk, otg_switch); + + if (!otg_sx->role_sw_used) + return 0; + + role_sx_desc.set = ssusb_role_sw_set; + role_sx_desc.get = ssusb_role_sw_get; + role_sx_desc.fwnode = dev_fwnode(ssusb->dev); + otg_sx->role_sw = usb_role_switch_register(ssusb->dev, &role_sx_desc); + + return PTR_ERR_OR_ZERO(otg_sx->role_sw); +} + int ssusb_otg_switch_init(struct ssusb_mtk *ssusb) { struct otg_switch_mtk *otg_sx = &ssusb->otg_switch; @@ -328,6 +371,8 @@ int ssusb_otg_switch_init(struct ssusb_mtk *ssusb) if (otg_sx->manual_drd_enabled) ssusb_dr_debugfs_init(ssusb); + else if (otg_sx->role_sw_used) + ret = ssusb_role_sw_register(otg_sx); else ret = ssusb_extcon_register(otg_sx); @@ -340,4 +385,5 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb) cancel_work_sync(&otg_sx->id_work); cancel_work_sync(&otg_sx->vbus_work); + usb_role_switch_unregister(otg_sx->role_sw); } diff --git a/drivers/usb/mtu3/mtu3_dr.h b/drivers/usb/mtu3/mtu3_dr.h index ba6fe357ce29..5e58c4dbd54a 100644 --- a/drivers/usb/mtu3/mtu3_dr.h +++ b/drivers/usb/mtu3/mtu3_dr.h @@ -71,7 +71,7 @@ static inline void ssusb_gadget_exit(struct ssusb_mtk *ssusb) #if IS_ENABLED(CONFIG_USB_MTU3_DUAL_ROLE) int ssusb_otg_switch_init(struct ssusb_mtk *ssusb); void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb); -void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host); +void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host); int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on); void ssusb_set_force_mode(struct ssusb_mtk *ssusb, enum mtu3_dr_force_mode mode); @@ -86,8 +86,8 @@ static inline int ssusb_otg_switch_init(struct ssusb_mtk *ssusb) static inline void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb) {} -static inline void -ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host) {} +static inline void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host) +{} static inline int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on) { diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index fd0f6c5dfbc1..9c256ea3cdf5 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -299,8 +299,9 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb) otg_sx->is_u3_drd = of_property_read_bool(node, "mediatek,usb3-drd"); otg_sx->manual_drd_enabled = of_property_read_bool(node, "enable-manual-drd"); + otg_sx->role_sw_used = of_property_read_bool(node, "usb-role-switch"); - if (of_property_read_bool(node, "extcon")) { + if (!otg_sx->role_sw_used && of_property_read_bool(node, "extcon")) { otg_sx->edev = extcon_get_edev_by_phandle(ssusb->dev, 0); if (IS_ERR(otg_sx->edev)) { dev_err(ssusb->dev, "couldn't get extcon device\n"); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 9f5a4819a744..bd63450af76a 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1721,7 +1721,7 @@ mode_show(struct device *dev, struct device_attribute *attr, char *buf) { struct musb *musb = dev_to_musb(dev); unsigned long flags; - int ret = -EINVAL; + int ret; spin_lock_irqsave(&musb->lock, flags); ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->otg->state)); @@ -1829,16 +1829,13 @@ static ssize_t srp_store(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_WO(srp); -static struct attribute *musb_attributes[] = { +static struct attribute *musb_attrs[] = { &dev_attr_mode.attr, &dev_attr_vbus.attr, &dev_attr_srp.attr, NULL }; - -static const struct attribute_group musb_attr_group = { - .attrs = musb_attributes, -}; +ATTRIBUTE_GROUPS(musb); #define MUSB_QUIRK_B_INVALID_VBUS_91 (MUSB_DEVCTL_BDEVICE | \ (2 << MUSB_DEVCTL_VBUS_SHIFT) | \ @@ -2038,10 +2035,6 @@ static void musb_free(struct musb *musb) * cleanup after everything's been de-activated. */ -#ifdef CONFIG_SYSFS - sysfs_remove_group(&musb->controller->kobj, &musb_attr_group); -#endif - if (musb->nIrq >= 0) { if (musb->irq_wake) disable_irq_wake(musb->nIrq); @@ -2390,22 +2383,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_init_debugfs(musb); - status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group); - if (status) - goto fail5; - musb->is_initialized = 1; pm_runtime_mark_last_busy(musb->controller); pm_runtime_put_autosuspend(musb->controller); return 0; -fail5: - musb_exit_debugfs(musb); - - musb_gadget_cleanup(musb); - musb_host_cleanup(musb); - fail3: cancel_delayed_work_sync(&musb->irq_work); cancel_delayed_work_sync(&musb->finish_resume_work); @@ -2798,6 +2781,7 @@ static struct platform_driver musb_driver = { .name = (char *)musb_driver_name, .bus = &platform_bus_type, .pm = MUSB_DEV_PM_OPS, + .dev_groups = musb_groups, }, .probe = musb_probe, .remove = musb_remove, diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index eb308ec35c66..5a44b70372d9 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2689,7 +2689,7 @@ static const struct hc_driver musb_hc_driver = { .description = "musb-hcd", .product_desc = "MUSB HDRC host driver", .hcd_priv_size = sizeof(struct musb *), - .flags = HCD_USB2 | HCD_MEMORY, + .flags = HCD_USB2 | HCD_DMA | HCD_MEMORY, /* not using irq handler or reset hooks from usbcore, since * those must be shared with peripheral code for OTG configs diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index aaf363f19714..4bb4b1d42f32 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -330,6 +330,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab, switch (lsts) { case USB_LINK_ACA_RID_B_8505: event = UX500_MUSB_RIDB; + /* Fall through */ case USB_LINK_NOT_CONFIGURED_8505: case USB_LINK_RESERVED0_8505: case USB_LINK_RESERVED1_8505: @@ -350,6 +351,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab, case USB_LINK_ACA_RID_C_NM_8505: event = UX500_MUSB_RIDC; + /* Fall through */ case USB_LINK_STD_HOST_NC_8505: case USB_LINK_STD_HOST_C_NS_8505: case USB_LINK_STD_HOST_C_S_8505: @@ -368,6 +370,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab, case USB_LINK_ACA_RID_A_8505: case USB_LINK_ACA_DOCK_CHGR_8505: event = UX500_MUSB_RIDA; + /* Fall through */ case USB_LINK_HM_IDGND_8505: if (ab->mode == USB_IDLE) { ab->mode = USB_HOST; @@ -422,6 +425,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab, switch (lsts) { case USB_LINK_ACA_RID_B_8500: event = UX500_MUSB_RIDB; + /* Fall through */ case USB_LINK_NOT_CONFIGURED_8500: case USB_LINK_NOT_VALID_LINK_8500: ab->mode = USB_IDLE; @@ -438,6 +442,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab, case USB_LINK_ACA_RID_C_HS_8500: case USB_LINK_ACA_RID_C_HS_CHIRP_8500: event = UX500_MUSB_RIDC; + /* Fall through */ case USB_LINK_STD_HOST_NC_8500: case USB_LINK_STD_HOST_C_NS_8500: case USB_LINK_STD_HOST_C_S_8500: @@ -457,6 +462,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab, case USB_LINK_ACA_RID_A_8500: event = UX500_MUSB_RIDA; + /* Fall through */ case USB_LINK_HM_IDGND_8500: if (ab->mode == USB_IDLE) { ab->mode = USB_HOST; @@ -712,10 +718,8 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev, if (ab->flags & AB8500_USB_FLAG_USE_LINK_STATUS_IRQ) { irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS"); - if (irq < 0) { - dev_err(&pdev->dev, "Link status irq not found\n"); + if (irq < 0) return irq; - } err = devm_request_threaded_irq(&pdev->dev, irq, NULL, ab8500_usb_link_status_irq, IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT, @@ -728,10 +732,8 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev, if (ab->flags & AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ) { irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F"); - if (irq < 0) { - dev_err(&pdev->dev, "ID fall irq not found\n"); + if (irq < 0) return irq; - } err = devm_request_threaded_irq(&pdev->dev, irq, NULL, ab8500_usb_disconnect_irq, IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT, @@ -744,10 +746,8 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev, if (ab->flags & AB8500_USB_FLAG_USE_VBUS_DET_IRQ) { irq = platform_get_irq_byname(pdev, "VBUS_DET_F"); - if (irq < 0) { - dev_err(&pdev->dev, "VBUS fall irq not found\n"); + if (irq < 0) return irq; - } err = devm_request_threaded_irq(&pdev->dev, irq, NULL, ab8500_usb_disconnect_irq, IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT, diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index f7c96d209eda..b451f4695f3f 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -65,7 +65,7 @@ struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr, static struct list_head active_timers; -static struct fsl_otg_config fsl_otg_initdata = { +static const struct fsl_otg_config fsl_otg_initdata = { .otg_port = 1, }; @@ -1043,6 +1043,11 @@ static ssize_t show_fsl_usb2_otg_state(struct device *dev, static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL); +static struct attribute *fsl_otg_attrs[] = { + &dev_attr_fsl_usb2_otg_state.attr, + NULL, +}; +ATTRIBUTE_GROUPS(fsl_otg); /* Char driver interface to control some OTG input */ @@ -1132,10 +1137,6 @@ static int fsl_otg_probe(struct platform_device *pdev) return ret; } - ret = device_create_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state); - if (ret) - dev_warn(&pdev->dev, "Can't register sysfs attribute\n"); - return ret; } @@ -1152,8 +1153,6 @@ static int fsl_otg_remove(struct platform_device *pdev) kfree(fsl_otg_dev->phy.otg); kfree(fsl_otg_dev); - device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state); - unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME); if (pdata->exit) @@ -1168,6 +1167,7 @@ struct platform_driver fsl_otg_driver = { .driver = { .name = driver_name, .owner = THIS_MODULE, + .dev_groups = fsl_otg_groups, }, }; diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c index cf7ecdc9a9d4..06b47f1028b3 100644 --- a/drivers/usb/phy/phy-mv-usb.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -641,12 +641,15 @@ static const struct attribute_group inputs_attr_group = { .attrs = inputs_attrs, }; +static const struct attribute_group *mv_otg_groups[] = { + &inputs_attr_group, + NULL, +}; + static int mv_otg_remove(struct platform_device *pdev) { struct mv_otg *mvotg = platform_get_drvdata(pdev); - sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group); - if (mvotg->qwork) { flush_workqueue(mvotg->qwork); destroy_workqueue(mvotg->qwork); @@ -809,13 +812,6 @@ static int mv_otg_probe(struct platform_device *pdev) goto err_disable_clk; } - retval = sysfs_create_group(&pdev->dev.kobj, &inputs_attr_group); - if (retval < 0) { - dev_dbg(&pdev->dev, - "Can't register sysfs attr group: %d\n", retval); - goto err_remove_phy; - } - spin_lock_init(&mvotg->wq_lock); if (spin_trylock(&mvotg->wq_lock)) { mv_otg_run_state_machine(mvotg, 2 * HZ); @@ -828,8 +824,6 @@ static int mv_otg_probe(struct platform_device *pdev) return 0; -err_remove_phy: - usb_remove_phy(&mvotg->phy); err_disable_clk: mv_otg_disable_internal(mvotg); err_destroy_workqueue: @@ -883,6 +877,7 @@ static struct platform_driver mv_otg_driver = { .remove = mv_otg_remove, .driver = { .name = driver_name, + .dev_groups = mv_otg_groups, }, #ifdef CONFIG_PM .suspend = mv_otg_suspend, diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c index 0981abc3d1ad..baebb1f5a973 100644 --- a/drivers/usb/phy/phy-tahvo.c +++ b/drivers/usb/phy/phy-tahvo.c @@ -312,15 +312,12 @@ static ssize_t otg_mode_store(struct device *device, } static DEVICE_ATTR_RW(otg_mode); -static struct attribute *tahvo_attributes[] = { +static struct attribute *tahvo_attrs[] = { &dev_attr_vbus.attr, &dev_attr_otg_mode.attr, NULL }; - -static const struct attribute_group tahvo_attr_group = { - .attrs = tahvo_attributes, -}; +ATTRIBUTE_GROUPS(tahvo); static int tahvo_usb_probe(struct platform_device *pdev) { @@ -406,17 +403,8 @@ static int tahvo_usb_probe(struct platform_device *pdev) goto err_remove_phy; } - /* Attributes */ - ret = sysfs_create_group(&pdev->dev.kobj, &tahvo_attr_group); - if (ret) { - dev_err(&pdev->dev, "cannot create sysfs group: %d\n", ret); - goto err_free_irq; - } - return 0; -err_free_irq: - free_irq(tu->irq, tu); err_remove_phy: usb_remove_phy(&tu->phy); err_disable_clk: @@ -430,7 +418,6 @@ static int tahvo_usb_remove(struct platform_device *pdev) { struct tahvo_usb *tu = platform_get_drvdata(pdev); - sysfs_remove_group(&pdev->dev.kobj, &tahvo_attr_group); free_irq(tu->irq, tu); usb_remove_phy(&tu->phy); if (!IS_ERR(tu->ick)) @@ -444,6 +431,7 @@ static struct platform_driver tahvo_usb_driver = { .remove = tahvo_usb_remove, .driver = { .name = "tahvo-usb", + .dev_groups = tahvo_groups, }, }; module_platform_driver(tahvo_usb_driver); diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c index dade34d70419..bfebf1f2e991 100644 --- a/drivers/usb/phy/phy-twl6030-usb.c +++ b/drivers/usb/phy/phy-twl6030-usb.c @@ -196,6 +196,12 @@ static ssize_t vbus_show(struct device *dev, } static DEVICE_ATTR_RO(vbus); +static struct attribute *twl6030_attrs[] = { + &dev_attr_vbus.attr, + NULL, +}; +ATTRIBUTE_GROUPS(twl6030); + static irqreturn_t twl6030_usb_irq(int irq, void *_twl) { struct twl6030_usb *twl = _twl; @@ -361,8 +367,6 @@ static int twl6030_usb_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, twl); - if (device_create_file(&pdev->dev, &dev_attr_vbus)) - dev_warn(&pdev->dev, "could not create sysfs file\n"); INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work); INIT_DELAYED_WORK(&twl->get_status_work, twl6030_status_work); @@ -373,7 +377,6 @@ static int twl6030_usb_probe(struct platform_device *pdev) if (status < 0) { dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", twl->irq1, status); - device_remove_file(twl->dev, &dev_attr_vbus); return status; } @@ -384,7 +387,6 @@ static int twl6030_usb_probe(struct platform_device *pdev) dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", twl->irq2, status); free_irq(twl->irq1, twl); - device_remove_file(twl->dev, &dev_attr_vbus); return status; } @@ -408,7 +410,6 @@ static int twl6030_usb_remove(struct platform_device *pdev) free_irq(twl->irq1, twl); free_irq(twl->irq2, twl); regulator_put(twl->usb3v3); - device_remove_file(twl->dev, &dev_attr_vbus); cancel_work_sync(&twl->set_vbus_work); return 0; @@ -426,6 +427,7 @@ static struct platform_driver twl6030_usb_driver = { .driver = { .name = "twl6030_usb", .of_match_table = of_match_ptr(twl6030_usb_id_table), + .dev_groups = twl6030_groups, }, }; diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index ddd3be48f948..ae54221011c3 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1283,7 +1283,7 @@ static const struct hc_driver usbhsh_driver = { /* * generic hardware linkage */ - .flags = HCD_USB2, + .flags = HCD_DMA | HCD_USB2, .start = usbhsh_host_start, .stop = usbhsh_host_stop, diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c index 86defca6623e..94b4e7db2b94 100644 --- a/drivers/usb/roles/class.c +++ b/drivers/usb/roles/class.c @@ -85,16 +85,6 @@ enum usb_role usb_role_switch_get_role(struct usb_role_switch *sw) } EXPORT_SYMBOL_GPL(usb_role_switch_get_role); -static int switch_fwnode_match(struct device *dev, const void *fwnode) -{ - return dev_fwnode(dev) == fwnode; -} - -static int switch_name_match(struct device *dev, const void *name) -{ - return !strcmp((const char *)name, dev_name(dev)); -} - static void *usb_role_switch_match(struct device_connection *con, int ep, void *data) { @@ -104,16 +94,27 @@ static void *usb_role_switch_match(struct device_connection *con, int ep, if (con->id && !fwnode_property_present(con->fwnode, con->id)) return NULL; - dev = class_find_device(role_class, NULL, con->fwnode, - switch_fwnode_match); + dev = class_find_device_by_fwnode(role_class, con->fwnode); } else { - dev = class_find_device(role_class, NULL, con->endpoint[ep], - switch_name_match); + dev = class_find_device_by_name(role_class, con->endpoint[ep]); } return dev ? to_role_switch(dev) : ERR_PTR(-EPROBE_DEFER); } +static struct usb_role_switch * +usb_role_switch_is_parent(struct fwnode_handle *fwnode) +{ + struct fwnode_handle *parent = fwnode_get_parent(fwnode); + struct device *dev; + + if (!parent || !fwnode_property_present(parent, "usb-role-switch")) + return NULL; + + dev = class_find_device_by_fwnode(role_class, parent); + return dev ? to_role_switch(dev) : ERR_PTR(-EPROBE_DEFER); +} + /** * usb_role_switch_get - Find USB role switch linked with the caller * @dev: The caller device @@ -125,8 +126,10 @@ struct usb_role_switch *usb_role_switch_get(struct device *dev) { struct usb_role_switch *sw; - sw = device_connection_find_match(dev, "usb-role-switch", NULL, - usb_role_switch_match); + sw = usb_role_switch_is_parent(dev_fwnode(dev)); + if (!sw) + sw = device_connection_find_match(dev, "usb-role-switch", NULL, + usb_role_switch_match); if (!IS_ERR_OR_NULL(sw)) WARN_ON(!try_module_get(sw->dev.parent->driver->owner)); @@ -136,6 +139,28 @@ struct usb_role_switch *usb_role_switch_get(struct device *dev) EXPORT_SYMBOL_GPL(usb_role_switch_get); /** + * fwnode_usb_role_switch_get - Find USB role switch linked with the caller + * @fwnode: The caller device node + * + * This is similar to the usb_role_switch_get() function above, but it searches + * the switch using fwnode instead of device entry. + */ +struct usb_role_switch *fwnode_usb_role_switch_get(struct fwnode_handle *fwnode) +{ + struct usb_role_switch *sw; + + sw = usb_role_switch_is_parent(fwnode); + if (!sw) + sw = fwnode_connection_find_match(fwnode, "usb-role-switch", + NULL, usb_role_switch_match); + if (!IS_ERR_OR_NULL(sw)) + WARN_ON(!try_module_get(sw->dev.parent->driver->owner)); + + return sw; +} +EXPORT_SYMBOL_GPL(fwnode_usb_role_switch_get); + +/** * usb_role_switch_put - Release handle to a switch * @sw: USB Role Switch * diff --git a/drivers/usb/roles/intel-xhci-usb-role-switch.c b/drivers/usb/roles/intel-xhci-usb-role-switch.c index 277de96181f9..409851306e99 100644 --- a/drivers/usb/roles/intel-xhci-usb-role-switch.c +++ b/drivers/usb/roles/intel-xhci-usb-role-switch.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/usb/role.h> /* register definition */ @@ -26,6 +27,12 @@ #define SW_VBUS_VALID BIT(24) #define SW_IDPIN_EN BIT(21) #define SW_IDPIN BIT(20) +#define SW_SWITCH_EN BIT(16) + +#define DRD_CONFIG_DYNAMIC 0 +#define DRD_CONFIG_STATIC_HOST 1 +#define DRD_CONFIG_STATIC_DEVICE 2 +#define DRD_CONFIG_MASK 3 #define DUAL_ROLE_CFG1 0x6c #define HOST_MODE BIT(29) @@ -37,6 +44,11 @@ struct intel_xhci_usb_data { struct usb_role_switch *role_sw; void __iomem *base; + bool enable_sw_switch; +}; + +static const struct software_node intel_xhci_usb_node = { + "intel-xhci-usb-sw", }; static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role) @@ -45,6 +57,7 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role) unsigned long timeout; acpi_status status; u32 glk, val; + u32 drd_config = DRD_CONFIG_DYNAMIC; /* * On many CHT devices ACPI event (_AEI) handlers read / modify / @@ -59,24 +72,35 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role) pm_runtime_get_sync(dev); - /* Set idpin value as requested */ + /* + * Set idpin value as requested. + * Since some devices rely on firmware setting DRD_CONFIG and + * SW_SWITCH_EN bits to be zero for role switch, + * do not set these bits for those devices. + */ val = readl(data->base + DUAL_ROLE_CFG0); switch (role) { case USB_ROLE_NONE: val |= SW_IDPIN; val &= ~SW_VBUS_VALID; + drd_config = DRD_CONFIG_DYNAMIC; break; case USB_ROLE_HOST: val &= ~SW_IDPIN; val &= ~SW_VBUS_VALID; + drd_config = DRD_CONFIG_STATIC_HOST; break; case USB_ROLE_DEVICE: val |= SW_IDPIN; val |= SW_VBUS_VALID; + drd_config = DRD_CONFIG_STATIC_DEVICE; break; } val |= SW_IDPIN_EN; - + if (data->enable_sw_switch) { + val &= ~DRD_CONFIG_MASK; + val |= SW_SWITCH_EN | drd_config; + } writel(val, data->base + DUAL_ROLE_CFG0); acpi_release_global_lock(glk); @@ -122,17 +146,13 @@ static enum usb_role intel_xhci_usb_get_role(struct device *dev) return role; } -static const struct usb_role_switch_desc sw_desc = { - .set = intel_xhci_usb_set_role, - .get = intel_xhci_usb_get_role, - .allow_userspace_control = true, -}; - static int intel_xhci_usb_probe(struct platform_device *pdev) { + struct usb_role_switch_desc sw_desc = { }; struct device *dev = &pdev->dev; struct intel_xhci_usb_data *data; struct resource *res; + int ret; data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -147,9 +167,23 @@ static int intel_xhci_usb_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); + ret = software_node_register(&intel_xhci_usb_node); + if (ret) + return ret; + + sw_desc.set = intel_xhci_usb_set_role, + sw_desc.get = intel_xhci_usb_get_role, + sw_desc.allow_userspace_control = true, + sw_desc.fwnode = software_node_fwnode(&intel_xhci_usb_node); + + data->enable_sw_switch = !device_property_read_bool(dev, + "sw_switch_disable"); + data->role_sw = usb_role_switch_register(dev, &sw_desc); - if (IS_ERR(data->role_sw)) + if (IS_ERR(data->role_sw)) { + fwnode_handle_put(sw_desc.fwnode); return PTR_ERR(data->role_sw); + } pm_runtime_set_active(dev); pm_runtime_enable(dev); @@ -164,6 +198,8 @@ static int intel_xhci_usb_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); usb_role_switch_unregister(data->role_sw); + fwnode_handle_put(software_node_fwnode(&intel_xhci_usb_node)); + return 0; } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 4b3a049561f3..f0688c44b04c 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2023,6 +2023,46 @@ static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr, return 0; } +static int ftdi_gpio_init_ft232h(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + u16 cbus_config; + u8 *buf; + int ret; + int i; + + buf = kmalloc(4, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = ftdi_read_eeprom(port->serial, buf, 0x1a, 4); + if (ret < 0) + goto out_free; + + /* + * FT232H CBUS Memory Map + * + * 0x1a: X- (upper nibble -> AC5) + * 0x1b: -X (lower nibble -> AC6) + * 0x1c: XX (upper nibble -> AC9 | lower nibble -> AC8) + */ + cbus_config = buf[2] << 8 | (buf[1] & 0xf) << 4 | (buf[0] & 0xf0) >> 4; + + priv->gc.ngpio = 4; + priv->gpio_altfunc = 0xff; + + for (i = 0; i < priv->gc.ngpio; ++i) { + if ((cbus_config & 0xf) == FTDI_FTX_CBUS_MUX_GPIO) + priv->gpio_altfunc &= ~BIT(i); + cbus_config >>= 4; + } + +out_free: + kfree(buf); + + return ret; +} + static int ftdi_gpio_init_ft232r(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -2098,6 +2138,9 @@ static int ftdi_gpio_init(struct usb_serial_port *port) int result; switch (priv->chip_type) { + case FT232H: + result = ftdi_gpio_init_ft232h(port); + break; case FT232RL: result = ftdi_gpio_init_ft232r(port); break; diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index a67ddcbb4e24..46635fa4a340 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -8,6 +8,8 @@ ccflags-y := -I $(srctree)/drivers/scsi +ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_STORAGE + obj-$(CONFIG_USB_UAS) += uas.o obj-$(CONFIG_USB_STORAGE) += usb-storage.o diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index 6b8edf6178df..ddab2cd3d2e7 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -36,6 +36,7 @@ MODULE_DESCRIPTION("Driver for Alauda-based card readers"); MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); /* * Status bytes diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 4825902377eb..a6f3267bbef6 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -22,6 +22,7 @@ MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB"); MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); /* * The table of devices diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 09353be199be..588818483f4b 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -54,6 +54,7 @@ MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader"); MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); struct datafab_info { unsigned long sectors; /* total sector count */ diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h index 6d64f342f587..16ce06039a4d 100644 --- a/drivers/usb/storage/debug.h +++ b/drivers/usb/storage/debug.h @@ -29,8 +29,6 @@ #include <linux/kernel.h> -#define USB_STORAGE "usb-storage: " - #ifdef CONFIG_USB_STORAGE_DEBUG void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb); void usb_stor_show_sense(const struct us_data *us, unsigned char key, diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index c26129d5b943..8b1b73065421 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -26,6 +26,7 @@ MODULE_DESCRIPTION("Driver for ENE UB6250 reader"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); MODULE_FIRMWARE(SD_INIT1_FIRMWARE); MODULE_FIRMWARE(SD_INIT2_FIRMWARE); MODULE_FIRMWARE(SD_RW_FIRMWARE); diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 4f542df37a44..34e7eaff1174 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -29,6 +29,7 @@ MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor"); MODULE_AUTHOR("David Brown <usb-storage@davidb.org>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); #ifdef CONFIG_USB_STORAGE_DEBUG static void pdump(struct us_data *us, void *ibuffer, int length); diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 2b474d60b4db..89f5e33a6e6d 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -53,6 +53,7 @@ MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC"); MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); static int isd200_Initialization(struct us_data *us); @@ -1511,7 +1512,7 @@ static int isd200_Initialization(struct us_data *us) static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) { - int sendToTransport = 1, orig_bufflen; + int sendToTransport, orig_bufflen; union ata_cdb ataCdb; /* Make sure driver was initialized */ diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index 917f170c4124..229bf0c1afc9 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -51,6 +51,7 @@ MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader"); MODULE_AUTHOR("Jimmie Mayfield <mayfield+usb@sackheads.org>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); /* * The table of devices diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index 395cf8fb5870..05cec81dcd3f 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -23,6 +23,7 @@ MODULE_DESCRIPTION("Driver for Rio Karma"); MODULE_AUTHOR("Bob Copeland <me@bobcopeland.com>, Keith Bennett <keith@mcs.st-and.ac.uk>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); #define RIO_PREFIX "RIOP\x00" #define RIO_PREFIX_LEN 5 diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 39a5009a41a6..a989fe930e21 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -25,6 +25,7 @@ MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver"); MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); #define ONETOUCH_PKT_LEN 0x02 #define ONETOUCH_BUTTON KEY_PROG1 diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index cc794e25a0b6..3789698d9d3c 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -35,10 +35,11 @@ MODULE_DESCRIPTION("Driver for Realtek USB Card Reader"); MODULE_AUTHOR("wwang <wei_wang@realsil.com.cn>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); static int auto_delink_en = 1; module_param(auto_delink_en, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(auto_delink_en, "enable auto delink"); +MODULE_PARM_DESC(auto_delink_en, "auto delink mode (0=firmware, 1=software [default])"); #ifdef CONFIG_REALTEK_AUTOPM static int ss_en = 1; @@ -996,12 +997,15 @@ static int init_realtek_cr(struct us_data *us) goto INIT_FAIL; } - if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || - CHECK_FW_VER(chip, 0x5901)) - SET_AUTO_DELINK(chip); - if (STATUS_LEN(chip) == 16) { - if (SUPPORT_AUTO_DELINK(chip)) + if (CHECK_PID(chip, 0x0138) || CHECK_PID(chip, 0x0158) || + CHECK_PID(chip, 0x0159)) { + if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || + CHECK_FW_VER(chip, 0x5901)) SET_AUTO_DELINK(chip); + if (STATUS_LEN(chip) == 16) { + if (SUPPORT_AUTO_DELINK(chip)) + SET_AUTO_DELINK(chip); + } } #ifdef CONFIG_REALTEK_AUTOPM if (ss_en) diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 05b80211290d..6737fab94959 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -40,6 +40,7 @@ #include <scsi/scsi_eh.h> #include "usb.h" +#include <linux/usb/hcd.h> #include "scsiglue.h" #include "debug.h" #include "transport.h" @@ -141,11 +142,10 @@ static int slave_configure(struct scsi_device *sdev) /* * Some USB host controllers can't do DMA; they have to use PIO. - * They indicate this by setting their dma_mask to NULL. For - * such controllers we need to make sure the block layer sets + * For such controllers we need to make sure the block layer sets * up bounce buffers in addressable memory. */ - if (!us->pusb_dev->bus->controller->dma_mask) + if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus))) blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH); /* @@ -379,7 +379,7 @@ static int queuecommand_lck(struct scsi_cmnd *srb, /* check for state-transition errors */ if (us->srb != NULL) { - printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n", + printk(KERN_ERR "usb-storage: Error in %s: us->srb = %p\n", __func__, us->srb); return SCSI_MLQUEUE_HOST_BUSY; } diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index bc9da736bdfc..51bcd4a43690 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -47,6 +47,7 @@ MODULE_DESCRIPTION("Driver for SanDisk SDDR-09 SmartMedia reader"); MODULE_AUTHOR("Andries Brouwer <aeb@cwi.nl>, Robert Baruch <autophile@starband.net>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); static int usb_stor_sddr09_dpcm_init(struct us_data *us); static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us); diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index b8527c55335b..ba955d65eb0e 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -29,6 +29,7 @@ MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader"); MODULE_AUTHOR("Simon Munton"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); /* * The table of devices diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 854498e1012c..54aa1392c9ca 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -48,6 +48,7 @@ MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable"); MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); /* Supported device types */ #define USBAT_DEV_HP8200 0x01 diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 047c5922618f..bf80d6f81f58 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -1219,5 +1219,6 @@ static struct usb_driver uas_driver = { module_usb_driver(uas_driver); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); MODULE_AUTHOR( "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp"); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ea0d27a94afe..1cd9b6305b06 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2100,7 +2100,7 @@ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, US_FL_IGNORE_RESIDUE ), /* Reported by Michael Büsch <m@bues.ch> */ -UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0116, +UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0117, "JMicron", "USB to ATA/ATAPI Bridge", USB_SC_DEVICE, USB_PR_DEVICE, NULL, diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig index 89d9193bd1cf..895e2418de53 100644 --- a/drivers/usb/typec/Kconfig +++ b/drivers/usb/typec/Kconfig @@ -53,6 +53,7 @@ source "drivers/usb/typec/ucsi/Kconfig" config TYPEC_TPS6598X tristate "TI TPS6598x USB Power Delivery controller driver" depends on I2C + select REGMAP_I2C help Say Y or M here if your system has TI TPS65982 or TPS65983 USB Power Delivery controller. diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index a18285a990a8..94a3eda62add 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -205,16 +205,6 @@ static void typec_altmode_put_partner(struct altmode *altmode) put_device(&adev->dev); } -static int typec_port_fwnode_match(struct device *dev, const void *fwnode) -{ - return dev_fwnode(dev) == fwnode; -} - -static int typec_port_name_match(struct device *dev, const void *name) -{ - return !strcmp((const char *)name, dev_name(dev)); -} - static void *typec_port_match(struct device_connection *con, int ep, void *data) { struct device *dev; @@ -224,11 +214,9 @@ static void *typec_port_match(struct device_connection *con, int ep, void *data) * we need to return ERR_PTR(-PROBE_DEFER) when there is no device. */ if (con->fwnode) - return class_find_device(typec_class, NULL, con->fwnode, - typec_port_fwnode_match); + return class_find_device_by_fwnode(typec_class, con->fwnode); - dev = class_find_device(typec_class, NULL, con->endpoint[ep], - typec_port_name_match); + dev = class_find_device_by_name(typec_class, con->endpoint[ep]); return dev ? dev : ERR_PTR(-EPROBE_DEFER); } diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index 61b7bc58dd81..57907f26f681 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -215,7 +215,7 @@ static void *typec_mux_match(struct device_connection *con, int ep, void *data) } /* Alternate Mode muxes */ - nval = fwnode_property_read_u16_array(con->fwnode, "svid", NULL, 0); + nval = fwnode_property_count_u16(con->fwnode, "svid"); if (nval <= 0) return NULL; diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index c524088246ee..ed8655c6af8c 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -26,6 +26,7 @@ #include <linux/spinlock.h> #include <linux/string.h> #include <linux/types.h> +#include <linux/usb.h> #include <linux/usb/typec.h> #include <linux/usb/tcpm.h> #include <linux/usb/pd.h> @@ -75,7 +76,6 @@ struct fusb302_chip { struct i2c_client *i2c_client; struct tcpm_port *tcpm_port; struct tcpc_dev tcpc_dev; - struct tcpc_config tcpc_config; struct regulator *vbus; @@ -207,23 +207,19 @@ static int fusb302_debug_show(struct seq_file *s, void *v) } DEFINE_SHOW_ATTRIBUTE(fusb302_debug); -static struct dentry *rootdir; - static void fusb302_debugfs_init(struct fusb302_chip *chip) { - mutex_init(&chip->logbuffer_lock); - if (!rootdir) - rootdir = debugfs_create_dir("fusb302", NULL); + char name[NAME_MAX]; - chip->dentry = debugfs_create_file(dev_name(chip->dev), - S_IFREG | 0444, rootdir, + mutex_init(&chip->logbuffer_lock); + snprintf(name, NAME_MAX, "fusb302-%s", dev_name(chip->dev)); + chip->dentry = debugfs_create_file(name, S_IFREG | 0444, usb_debug_root, chip, &fusb302_debug_fops); } static void fusb302_debugfs_exit(struct fusb302_chip *chip) { debugfs_remove(chip->dentry); - debugfs_remove(rootdir); } #else @@ -1110,23 +1106,6 @@ done: mutex_unlock(&chip->lock); } -#define PDO_FIXED_FLAGS \ - (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM) - -static const u32 src_pdo[] = { - PDO_FIXED(5000, 400, PDO_FIXED_FLAGS), -}; - -static const struct tcpc_config fusb302_tcpc_config = { - .src_pdo = src_pdo, - .nr_src_pdo = ARRAY_SIZE(src_pdo), - .operating_snk_mw = 2500, - .type = TYPEC_PORT_DRP, - .data = TYPEC_PORT_DRD, - .default_role = TYPEC_SINK, - .alt_modes = NULL, -}; - static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev) { fusb302_tcpc_dev->init = tcpm_init; @@ -1670,27 +1649,36 @@ static int init_gpio(struct fusb302_chip *chip) return 0; } -static int fusb302_composite_snk_pdo_array(struct fusb302_chip *chip) -{ - struct device *dev = chip->dev; - u32 max_uv, max_ua; +#define PDO_FIXED_FLAGS \ + (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM) - chip->snk_pdo[0] = PDO_FIXED(5000, 400, PDO_FIXED_FLAGS); +static const u32 src_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS) +}; - /* - * As max_snk_ma/mv/mw is not needed for tcpc_config, - * those settings should be passed in via sink PDO, so - * "fcs, max-sink-*" properties will be deprecated, to - * perserve compatibility with existing users of them, - * we read those properties to convert them to be a var - * PDO. - */ - if (device_property_read_u32(dev, "fcs,max-sink-microvolt", &max_uv) || - device_property_read_u32(dev, "fcs,max-sink-microamp", &max_ua)) - return 1; +static const u32 snk_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS) +}; + +static const struct property_entry port_props[] = { + PROPERTY_ENTRY_STRING("data-role", "dual"), + PROPERTY_ENTRY_STRING("power-role", "dual"), + PROPERTY_ENTRY_STRING("try-power-role", "sink"), + PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), + PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), + PROPERTY_ENTRY_U32("op-sink-microwatt", 2500), + { } +}; - chip->snk_pdo[1] = PDO_VAR(5000, max_uv / 1000, max_ua / 1000); - return 2; +static struct fwnode_handle *fusb302_fwnode_get(struct device *dev) +{ + struct fwnode_handle *fwnode; + + fwnode = device_get_named_child_node(dev, "connector"); + if (!fwnode) + fwnode = fwnode_create_software_node(port_props, NULL); + + return fwnode; } static int fusb302_probe(struct i2c_client *client, @@ -1701,7 +1689,6 @@ static int fusb302_probe(struct i2c_client *client, struct device *dev = &client->dev; const char *name; int ret = 0; - u32 v; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { dev_err(&client->dev, @@ -1714,20 +1701,8 @@ static int fusb302_probe(struct i2c_client *client, chip->i2c_client = client; chip->dev = &client->dev; - chip->tcpc_config = fusb302_tcpc_config; - chip->tcpc_dev.config = &chip->tcpc_config; mutex_init(&chip->lock); - chip->tcpc_dev.fwnode = - device_get_named_child_node(dev, "connector"); - - if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v)) - chip->tcpc_config.operating_snk_mw = v / 1000; - - /* Composite sink PDO */ - chip->tcpc_config.nr_snk_pdo = fusb302_composite_snk_pdo_array(chip); - chip->tcpc_config.snk_pdo = chip->snk_pdo; - /* * Devicetree platforms should get extcon via phandle (not yet * supported). On ACPI platforms, we get the name from a device prop. @@ -1753,6 +1728,7 @@ static int fusb302_probe(struct i2c_client *client, INIT_WORK(&chip->irq_work, fusb302_irq_work); INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work); init_tcpc_dev(&chip->tcpc_dev); + fusb302_debugfs_init(chip); if (client->irq) { chip->gpio_int_n_irq = client->irq; @@ -1762,8 +1738,15 @@ static int fusb302_probe(struct i2c_client *client, goto destroy_workqueue; } + chip->tcpc_dev.fwnode = fusb302_fwnode_get(dev); + if (IS_ERR(chip->tcpc_dev.fwnode)) { + ret = PTR_ERR(chip->tcpc_dev.fwnode); + goto destroy_workqueue; + } + chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev); if (IS_ERR(chip->tcpm_port)) { + fwnode_handle_put(chip->tcpc_dev.fwnode); ret = PTR_ERR(chip->tcpm_port); if (ret != -EPROBE_DEFER) dev_err(dev, "cannot register tcpm port, ret=%d", ret); @@ -1778,14 +1761,15 @@ static int fusb302_probe(struct i2c_client *client, goto tcpm_unregister_port; } enable_irq_wake(chip->gpio_int_n_irq); - fusb302_debugfs_init(chip); i2c_set_clientdata(client, chip); return ret; tcpm_unregister_port: tcpm_unregister_port(chip->tcpm_port); + fwnode_handle_put(chip->tcpc_dev.fwnode); destroy_workqueue: + fusb302_debugfs_exit(chip); destroy_workqueue(chip->wq); return ret; @@ -1800,6 +1784,7 @@ static int fusb302_remove(struct i2c_client *client) cancel_work_sync(&chip->irq_work); cancel_delayed_work_sync(&chip->bc_lvl_handler); tcpm_unregister_port(chip->tcpm_port); + fwnode_handle_put(chip->tcpc_dev.fwnode); destroy_workqueue(chip->wq); fusb302_debugfs_exit(chip); diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 15abe1d9958f..96562744101c 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -19,6 +19,7 @@ #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/spinlock.h> +#include <linux/usb.h> #include <linux/usb/pd.h> #include <linux/usb/pd_ado.h> #include <linux/usb/pd_bdo.h> @@ -571,17 +572,13 @@ static int tcpm_debug_show(struct seq_file *s, void *v) } DEFINE_SHOW_ATTRIBUTE(tcpm_debug); -static struct dentry *rootdir; - static void tcpm_debugfs_init(struct tcpm_port *port) { - mutex_init(&port->logbuffer_lock); - /* /sys/kernel/debug/tcpm/usbcX */ - if (!rootdir) - rootdir = debugfs_create_dir("tcpm", NULL); + char name[NAME_MAX]; - port->dentry = debugfs_create_file(dev_name(port->dev), - S_IFREG | 0444, rootdir, + mutex_init(&port->logbuffer_lock); + snprintf(name, NAME_MAX, "tcpm-%s", dev_name(port->dev)); + port->dentry = debugfs_create_file(name, S_IFREG | 0444, usb_debug_root, port, &tcpm_debug_fops); } @@ -597,10 +594,6 @@ static void tcpm_debugfs_exit(struct tcpm_port *port) mutex_unlock(&port->logbuffer_lock); debugfs_remove(port->dentry); - if (list_empty(&rootdir->d_subdirs)) { - debugfs_remove(rootdir); - rootdir = NULL; - } } #else @@ -1446,7 +1439,7 @@ static enum pdo_err tcpm_caps_err(struct tcpm_port *port, const u32 *pdo, else if ((pdo_min_voltage(pdo[i]) == pdo_min_voltage(pdo[i - 1])) && (pdo_max_voltage(pdo[i]) == - pdo_min_voltage(pdo[i - 1]))) + pdo_max_voltage(pdo[i - 1]))) return PDO_ERR_DUPE_PDO; break; /* @@ -4434,8 +4427,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port, goto sink; /* Get source pdos */ - ret = fwnode_property_read_u32_array(fwnode, "source-pdos", - NULL, 0); + ret = fwnode_property_count_u32(fwnode, "source-pdos"); if (ret <= 0) return -EINVAL; @@ -4459,8 +4451,7 @@ static int tcpm_fw_get_caps(struct tcpm_port *port, return -EINVAL; sink: /* Get sink pdos */ - ret = fwnode_property_read_u32_array(fwnode, "sink-pdos", - NULL, 0); + ret = fwnode_property_count_u32(fwnode, "sink-pdos"); if (ret <= 0) return -EINVAL; diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c index 6b317c150bdd..edc271da14f4 100644 --- a/drivers/usb/typec/tcpm/wcove.c +++ b/drivers/usb/typec/tcpm/wcove.c @@ -617,10 +617,8 @@ static int wcove_typec_probe(struct platform_device *pdev) wcove->regmap = pmic->regmap; irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq); + if (irq < 0) return irq; - } irq = regmap_irq_get_virq(pmic->irq_chip_data_chgr, irq); if (irq < 0) diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index 8e9f8fba55af..907e20e1a71e 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -1104,14 +1104,11 @@ static ssize_t do_flash_store(struct device *dev, static DEVICE_ATTR_WO(do_flash); -static struct attribute *ucsi_ccg_sysfs_attrs[] = { +static struct attribute *ucsi_ccg_attrs[] = { &dev_attr_do_flash.attr, NULL, }; - -static struct attribute_group ucsi_ccg_attr_group = { - .attrs = ucsi_ccg_sysfs_attrs, -}; +ATTRIBUTE_GROUPS(ucsi_ccg); static int ucsi_ccg_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -1189,10 +1186,6 @@ static int ucsi_ccg_probe(struct i2c_client *client, i2c_set_clientdata(client, uc); - status = sysfs_create_group(&uc->dev->kobj, &ucsi_ccg_attr_group); - if (status) - dev_err(uc->dev, "cannot create sysfs group: %d\n", status); - pm_runtime_set_active(uc->dev); pm_runtime_enable(uc->dev); pm_runtime_idle(uc->dev); @@ -1209,7 +1202,6 @@ static int ucsi_ccg_remove(struct i2c_client *client) ucsi_unregister_ppm(uc->ucsi); pm_runtime_disable(uc->dev); free_irq(uc->irq, uc); - sysfs_remove_group(&uc->dev->kobj, &ucsi_ccg_attr_group); return 0; } @@ -1270,6 +1262,7 @@ static struct i2c_driver ucsi_ccg_driver = { .driver = { .name = "ucsi_ccg", .pm = &ucsi_ccg_pm, + .dev_groups = ucsi_ccg_groups, }, .probe = ucsi_ccg_probe, .remove = ucsi_ccg_remove, diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index f101347e3ea3..c31d17d05810 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -35,9 +35,11 @@ MODULE_DEVICE_TABLE(usb, skel_table); /* our private defines. if this grows any larger, use your own .h file */ #define MAX_TRANSFER (PAGE_SIZE - 512) -/* MAX_TRANSFER is chosen so that the VM is not stressed by - allocations > PAGE_SIZE and the number of packets in a page - is an integer 512 is the largest possible packet on EHCI */ +/* + * MAX_TRANSFER is chosen so that the VM is not stressed by + * allocations > PAGE_SIZE and the number of packets in a page + * is an integer 512 is the largest possible packet on EHCI + */ #define WRITES_IN_FLIGHT 8 /* arbitrarily chosen */ diff --git a/drivers/usb/usbip/stub.h b/drivers/usb/usbip/stub.h index 35618ceb2791..d11270560c24 100644 --- a/drivers/usb/usbip/stub.h +++ b/drivers/usb/usbip/stub.h @@ -52,7 +52,11 @@ struct stub_priv { unsigned long seqnum; struct list_head list; struct stub_device *sdev; - struct urb *urb; + struct urb **urbs; + struct scatterlist *sgl; + int num_urbs; + int completed_urbs; + int urb_status; int unlinking; }; @@ -86,6 +90,7 @@ extern struct usb_device_driver stub_driver; struct bus_id_priv *get_busid_priv(const char *busid); void put_busid_priv(struct bus_id_priv *bid); int del_match_busid(char *busid); +void stub_free_priv_and_urb(struct stub_priv *priv); void stub_device_cleanup_urbs(struct stub_device *sdev); /* stub_rx.c */ diff --git a/drivers/usb/usbip/stub_dev.c b/drivers/usb/usbip/stub_dev.c index 7931e6cecc70..2305d425e6c9 100644 --- a/drivers/usb/usbip/stub_dev.c +++ b/drivers/usb/usbip/stub_dev.c @@ -106,38 +106,13 @@ err: } static DEVICE_ATTR_WO(usbip_sockfd); -static int stub_add_files(struct device *dev) -{ - int err = 0; - - err = device_create_file(dev, &dev_attr_usbip_status); - if (err) - goto err_status; - - err = device_create_file(dev, &dev_attr_usbip_sockfd); - if (err) - goto err_sockfd; - - err = device_create_file(dev, &dev_attr_usbip_debug); - if (err) - goto err_debug; - - return 0; - -err_debug: - device_remove_file(dev, &dev_attr_usbip_sockfd); -err_sockfd: - device_remove_file(dev, &dev_attr_usbip_status); -err_status: - return err; -} - -static void stub_remove_files(struct device *dev) -{ - device_remove_file(dev, &dev_attr_usbip_status); - device_remove_file(dev, &dev_attr_usbip_sockfd); - device_remove_file(dev, &dev_attr_usbip_debug); -} +static struct attribute *usbip_attrs[] = { + &dev_attr_usbip_status.attr, + &dev_attr_usbip_sockfd.attr, + &dev_attr_usbip_debug.attr, + NULL, +}; +ATTRIBUTE_GROUPS(usbip); static void stub_shutdown_connection(struct usbip_device *ud) { @@ -379,17 +354,8 @@ static int stub_probe(struct usb_device *udev) goto err_port; } - rc = stub_add_files(&udev->dev); - if (rc) { - dev_err(&udev->dev, "stub_add_files for %s\n", udev_busid); - goto err_files; - } - return 0; -err_files: - usb_hub_release_port(udev->parent, udev->portnum, - (struct usb_dev_state *) udev); err_port: dev_set_drvdata(&udev->dev, NULL); usb_put_dev(udev); @@ -457,7 +423,6 @@ static void stub_disconnect(struct usb_device *udev) /* * NOTE: rx/tx threads are invoked for each usb_device. */ - stub_remove_files(&udev->dev); /* release port */ rc = usb_hub_release_port(udev->parent, udev->portnum, @@ -526,4 +491,5 @@ struct usb_device_driver stub_driver = { .resume = stub_resume, #endif .supports_autosuspend = 0, + .dev_groups = usbip_groups, }; diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c index 2e4bfccd4bfc..c1c0bbc9f8b1 100644 --- a/drivers/usb/usbip/stub_main.c +++ b/drivers/usb/usbip/stub_main.c @@ -6,6 +6,7 @@ #include <linux/string.h> #include <linux/module.h> #include <linux/device.h> +#include <linux/scatterlist.h> #include "usbip_common.h" #include "stub.h" @@ -281,13 +282,49 @@ static struct stub_priv *stub_priv_pop_from_listhead(struct list_head *listhead) struct stub_priv *priv, *tmp; list_for_each_entry_safe(priv, tmp, listhead, list) { - list_del(&priv->list); + list_del_init(&priv->list); return priv; } return NULL; } +void stub_free_priv_and_urb(struct stub_priv *priv) +{ + struct urb *urb; + int i; + + for (i = 0; i < priv->num_urbs; i++) { + urb = priv->urbs[i]; + + if (!urb) + return; + + kfree(urb->setup_packet); + urb->setup_packet = NULL; + + + if (urb->transfer_buffer && !priv->sgl) { + kfree(urb->transfer_buffer); + urb->transfer_buffer = NULL; + } + + if (urb->num_sgs) { + sgl_free(urb->sg); + urb->sg = NULL; + urb->num_sgs = 0; + } + + usb_free_urb(urb); + } + if (!list_empty(&priv->list)) + list_del(&priv->list); + if (priv->sgl) + sgl_free(priv->sgl); + kfree(priv->urbs); + kmem_cache_free(stub_priv_cache, priv); +} + static struct stub_priv *stub_priv_pop(struct stub_device *sdev) { unsigned long flags; @@ -314,25 +351,15 @@ done: void stub_device_cleanup_urbs(struct stub_device *sdev) { struct stub_priv *priv; - struct urb *urb; + int i; dev_dbg(&sdev->udev->dev, "Stub device cleaning up urbs\n"); while ((priv = stub_priv_pop(sdev))) { - urb = priv->urb; - dev_dbg(&sdev->udev->dev, "free urb seqnum %lu\n", - priv->seqnum); - usb_kill_urb(urb); - - kmem_cache_free(stub_priv_cache, priv); + for (i = 0; i < priv->num_urbs; i++) + usb_kill_urb(priv->urbs[i]); - kfree(urb->transfer_buffer); - urb->transfer_buffer = NULL; - - kfree(urb->setup_packet); - urb->setup_packet = NULL; - - usb_free_urb(urb); + stub_free_priv_and_urb(priv); } } diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index b0a855acafa3..66edfeea68fe 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -7,6 +7,7 @@ #include <linux/kthread.h> #include <linux/usb.h> #include <linux/usb/hcd.h> +#include <linux/scatterlist.h> #include "usbip_common.h" #include "stub.h" @@ -201,7 +202,7 @@ static void tweak_special_requests(struct urb *urb) static int stub_recv_cmd_unlink(struct stub_device *sdev, struct usbip_header *pdu) { - int ret; + int ret, i; unsigned long flags; struct stub_priv *priv; @@ -246,12 +247,14 @@ static int stub_recv_cmd_unlink(struct stub_device *sdev, * so a driver in a client host will know the failure * of the unlink request ? */ - ret = usb_unlink_urb(priv->urb); - if (ret != -EINPROGRESS) - dev_err(&priv->urb->dev->dev, - "failed to unlink a urb # %lu, ret %d\n", - priv->seqnum, ret); - + for (i = priv->completed_urbs; i < priv->num_urbs; i++) { + ret = usb_unlink_urb(priv->urbs[i]); + if (ret != -EINPROGRESS) + dev_err(&priv->urbs[i]->dev->dev, + "failed to unlink %d/%d urb of seqnum %lu, ret %d\n", + i + 1, priv->num_urbs, + priv->seqnum, ret); + } return 0; } @@ -433,14 +436,36 @@ static void masking_bogus_flags(struct urb *urb) urb->transfer_flags &= allowed; } +static int stub_recv_xbuff(struct usbip_device *ud, struct stub_priv *priv) +{ + int ret; + int i; + + for (i = 0; i < priv->num_urbs; i++) { + ret = usbip_recv_xbuff(ud, priv->urbs[i]); + if (ret < 0) + break; + } + + return ret; +} + static void stub_recv_cmd_submit(struct stub_device *sdev, struct usbip_header *pdu) { - int ret; struct stub_priv *priv; struct usbip_device *ud = &sdev->ud; struct usb_device *udev = sdev->udev; + struct scatterlist *sgl = NULL, *sg; + void *buffer = NULL; + unsigned long long buf_len; + int nents; + int num_urbs = 1; int pipe = get_pipe(sdev, pdu); + int use_sg = pdu->u.cmd_submit.transfer_flags & URB_DMA_MAP_SG; + int support_sg = 1; + int np = 0; + int ret, i; if (pipe == -1) return; @@ -449,76 +474,139 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, if (!priv) return; - /* setup a urb */ - if (usb_pipeisoc(pipe)) - priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets, - GFP_KERNEL); - else - priv->urb = usb_alloc_urb(0, GFP_KERNEL); + buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length; - if (!priv->urb) { - usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); - return; + /* allocate urb transfer buffer, if needed */ + if (buf_len) { + if (use_sg) { + sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents); + if (!sgl) + goto err_malloc; + } else { + buffer = kzalloc(buf_len, GFP_KERNEL); + if (!buffer) + goto err_malloc; + } } - /* allocate urb transfer buffer, if needed */ - if (pdu->u.cmd_submit.transfer_buffer_length > 0) { - priv->urb->transfer_buffer = - kzalloc(pdu->u.cmd_submit.transfer_buffer_length, - GFP_KERNEL); - if (!priv->urb->transfer_buffer) { + /* Check if the server's HCD supports SG */ + if (use_sg && !udev->bus->sg_tablesize) { + /* + * If the server's HCD doesn't support SG, break a single SG + * request into several URBs and map each SG list entry to + * corresponding URB buffer. The previously allocated SG + * list is stored in priv->sgl (If the server's HCD support SG, + * SG list is stored only in urb->sg) and it is used as an + * indicator that the server split single SG request into + * several URBs. Later, priv->sgl is used by stub_complete() and + * stub_send_ret_submit() to reassemble the divied URBs. + */ + support_sg = 0; + num_urbs = nents; + priv->completed_urbs = 0; + pdu->u.cmd_submit.transfer_flags &= ~URB_DMA_MAP_SG; + } + + /* allocate urb array */ + priv->num_urbs = num_urbs; + priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL); + if (!priv->urbs) + goto err_urbs; + + /* setup a urb */ + if (support_sg) { + if (usb_pipeisoc(pipe)) + np = pdu->u.cmd_submit.number_of_packets; + + priv->urbs[0] = usb_alloc_urb(np, GFP_KERNEL); + if (!priv->urbs[0]) + goto err_urb; + + if (buf_len) { + if (use_sg) { + priv->urbs[0]->sg = sgl; + priv->urbs[0]->num_sgs = nents; + priv->urbs[0]->transfer_buffer = NULL; + } else { + priv->urbs[0]->transfer_buffer = buffer; + } + } + + /* copy urb setup packet */ + priv->urbs[0]->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, + 8, GFP_KERNEL); + if (!priv->urbs[0]->setup_packet) { usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); return; } - } - /* copy urb setup packet */ - priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8, - GFP_KERNEL); - if (!priv->urb->setup_packet) { - dev_err(&udev->dev, "allocate setup_packet\n"); - usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); - return; + usbip_pack_pdu(pdu, priv->urbs[0], USBIP_CMD_SUBMIT, 0); + } else { + for_each_sg(sgl, sg, nents, i) { + priv->urbs[i] = usb_alloc_urb(0, GFP_KERNEL); + /* The URBs which is previously allocated will be freed + * in stub_device_cleanup_urbs() if error occurs. + */ + if (!priv->urbs[i]) + goto err_urb; + + usbip_pack_pdu(pdu, priv->urbs[i], USBIP_CMD_SUBMIT, 0); + priv->urbs[i]->transfer_buffer = sg_virt(sg); + priv->urbs[i]->transfer_buffer_length = sg->length; + } + priv->sgl = sgl; } - /* set other members from the base header of pdu */ - priv->urb->context = (void *) priv; - priv->urb->dev = udev; - priv->urb->pipe = pipe; - priv->urb->complete = stub_complete; + for (i = 0; i < num_urbs; i++) { + /* set other members from the base header of pdu */ + priv->urbs[i]->context = (void *) priv; + priv->urbs[i]->dev = udev; + priv->urbs[i]->pipe = pipe; + priv->urbs[i]->complete = stub_complete; - usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0); + /* no need to submit an intercepted request, but harmless? */ + tweak_special_requests(priv->urbs[i]); + masking_bogus_flags(priv->urbs[i]); + } - if (usbip_recv_xbuff(ud, priv->urb) < 0) + if (stub_recv_xbuff(ud, priv) < 0) return; - if (usbip_recv_iso(ud, priv->urb) < 0) + if (usbip_recv_iso(ud, priv->urbs[0]) < 0) return; - /* no need to submit an intercepted request, but harmless? */ - tweak_special_requests(priv->urb); - - masking_bogus_flags(priv->urb); /* urb is now ready to submit */ - ret = usb_submit_urb(priv->urb, GFP_KERNEL); - - if (ret == 0) - usbip_dbg_stub_rx("submit urb ok, seqnum %u\n", - pdu->base.seqnum); - else { - dev_err(&udev->dev, "submit_urb error, %d\n", ret); - usbip_dump_header(pdu); - usbip_dump_urb(priv->urb); - - /* - * Pessimistic. - * This connection will be discarded. - */ - usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT); + for (i = 0; i < priv->num_urbs; i++) { + ret = usb_submit_urb(priv->urbs[i], GFP_KERNEL); + + if (ret == 0) + usbip_dbg_stub_rx("submit urb ok, seqnum %u\n", + pdu->base.seqnum); + else { + dev_err(&udev->dev, "submit_urb error, %d\n", ret); + usbip_dump_header(pdu); + usbip_dump_urb(priv->urbs[i]); + + /* + * Pessimistic. + * This connection will be discarded. + */ + usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT); + break; + } } usbip_dbg_stub_rx("Leave\n"); + return; + +err_urb: + kfree(priv->urbs); +err_urbs: + kfree(buffer); + sgl_free(sgl); +err_malloc: + usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC); } /* recv a pdu */ diff --git a/drivers/usb/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c index f0ec41a50cbc..36010a82b359 100644 --- a/drivers/usb/usbip/stub_tx.c +++ b/drivers/usb/usbip/stub_tx.c @@ -5,25 +5,11 @@ #include <linux/kthread.h> #include <linux/socket.h> +#include <linux/scatterlist.h> #include "usbip_common.h" #include "stub.h" -static void stub_free_priv_and_urb(struct stub_priv *priv) -{ - struct urb *urb = priv->urb; - - kfree(urb->setup_packet); - urb->setup_packet = NULL; - - kfree(urb->transfer_buffer); - urb->transfer_buffer = NULL; - - list_del(&priv->list); - kmem_cache_free(stub_priv_cache, priv); - usb_free_urb(urb); -} - /* be in spin_lock_irqsave(&sdev->priv_lock, flags) */ void stub_enqueue_ret_unlink(struct stub_device *sdev, __u32 seqnum, __u32 status) @@ -85,6 +71,22 @@ void stub_complete(struct urb *urb) break; } + /* + * If the server breaks single SG request into the several URBs, the + * URBs must be reassembled before sending completed URB to the vhci. + * Don't wake up the tx thread until all the URBs are completed. + */ + if (priv->sgl) { + priv->completed_urbs++; + + /* Only save the first error status */ + if (urb->status && !priv->urb_status) + priv->urb_status = urb->status; + + if (priv->completed_urbs < priv->num_urbs) + return; + } + /* link a urb to the queue of tx. */ spin_lock_irqsave(&sdev->priv_lock, flags); if (sdev->ud.tcp_socket == NULL) { @@ -156,18 +158,22 @@ static int stub_send_ret_submit(struct stub_device *sdev) size_t total_size = 0; while ((priv = dequeue_from_priv_tx(sdev)) != NULL) { - int ret; - struct urb *urb = priv->urb; + struct urb *urb = priv->urbs[0]; struct usbip_header pdu_header; struct usbip_iso_packet_descriptor *iso_buffer = NULL; struct kvec *iov = NULL; + struct scatterlist *sg; + u32 actual_length = 0; int iovnum = 0; + int ret; + int i; txsize = 0; memset(&pdu_header, 0, sizeof(pdu_header)); memset(&msg, 0, sizeof(msg)); - if (urb->actual_length > 0 && !urb->transfer_buffer) { + if (urb->actual_length > 0 && !urb->transfer_buffer && + !urb->num_sgs) { dev_err(&sdev->udev->dev, "urb: actual_length %d transfer_buffer null\n", urb->actual_length); @@ -176,6 +182,11 @@ static int stub_send_ret_submit(struct stub_device *sdev) if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) iovnum = 2 + urb->number_of_packets; + else if (usb_pipein(urb->pipe) && urb->actual_length > 0 && + urb->num_sgs) + iovnum = 1 + urb->num_sgs; + else if (usb_pipein(urb->pipe) && priv->sgl) + iovnum = 1 + priv->num_urbs; else iovnum = 2; @@ -192,6 +203,15 @@ static int stub_send_ret_submit(struct stub_device *sdev) setup_ret_submit_pdu(&pdu_header, urb); usbip_dbg_stub_tx("setup txdata seqnum: %d\n", pdu_header.base.seqnum); + + if (priv->sgl) { + for (i = 0; i < priv->num_urbs; i++) + actual_length += priv->urbs[i]->actual_length; + + pdu_header.u.ret_submit.status = priv->urb_status; + pdu_header.u.ret_submit.actual_length = actual_length; + } + usbip_header_correct_endian(&pdu_header, 1); iov[iovnum].iov_base = &pdu_header; @@ -200,12 +220,47 @@ static int stub_send_ret_submit(struct stub_device *sdev) txsize += sizeof(pdu_header); /* 2. setup transfer buffer */ - if (usb_pipein(urb->pipe) && + if (usb_pipein(urb->pipe) && priv->sgl) { + /* If the server split a single SG request into several + * URBs because the server's HCD doesn't support SG, + * reassemble the split URB buffers into a single + * return command. + */ + for (i = 0; i < priv->num_urbs; i++) { + iov[iovnum].iov_base = + priv->urbs[i]->transfer_buffer; + iov[iovnum].iov_len = + priv->urbs[i]->actual_length; + iovnum++; + } + txsize += actual_length; + } else if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS && urb->actual_length > 0) { - iov[iovnum].iov_base = urb->transfer_buffer; - iov[iovnum].iov_len = urb->actual_length; - iovnum++; + if (urb->num_sgs) { + unsigned int copy = urb->actual_length; + int size; + + for_each_sg(urb->sg, sg, urb->num_sgs, i) { + if (copy == 0) + break; + + if (copy < sg->length) + size = copy; + else + size = sg->length; + + iov[iovnum].iov_base = sg_virt(sg); + iov[iovnum].iov_len = size; + + iovnum++; + copy -= size; + } + } else { + iov[iovnum].iov_base = urb->transfer_buffer; + iov[iovnum].iov_len = urb->actual_length; + iovnum++; + } txsize += urb->actual_length; } else if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c index 45da3e01c7b0..6532d68e8808 100644 --- a/drivers/usb/usbip/usbip_common.c +++ b/drivers/usb/usbip/usbip_common.c @@ -680,8 +680,12 @@ EXPORT_SYMBOL_GPL(usbip_pad_iso); /* some members of urb must be substituted before. */ int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb) { - int ret; + struct scatterlist *sg; + int ret = 0; + int recv; int size; + int copy; + int i; if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC) { /* the direction of urb must be OUT. */ @@ -701,29 +705,48 @@ int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb) if (!(size > 0)) return 0; - if (size > urb->transfer_buffer_length) { + if (size > urb->transfer_buffer_length) /* should not happen, probably malicious packet */ - if (ud->side == USBIP_STUB) { - usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); - return 0; - } else { - usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); - return -EPIPE; - } - } + goto error; - ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size); - if (ret != size) { - dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret); - if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC) { - usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); - } else { - usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); - return -EPIPE; + if (urb->num_sgs) { + copy = size; + for_each_sg(urb->sg, sg, urb->num_sgs, i) { + int recv_size; + + if (copy < sg->length) + recv_size = copy; + else + recv_size = sg->length; + + recv = usbip_recv(ud->tcp_socket, sg_virt(sg), + recv_size); + + if (recv != recv_size) + goto error; + + copy -= recv; + ret += recv; } + + if (ret != size) + goto error; + } else { + ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size); + if (ret != size) + goto error; } return ret; + +error: + dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret); + if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC) + usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); + else + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + + return -EPIPE; } EXPORT_SYMBOL_GPL(usbip_recv_xbuff); diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 000ab7225717..585a84d319bd 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -697,7 +697,8 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag } vdev = &vhci_hcd->vdev[portnum-1]; - if (!urb->transfer_buffer && urb->transfer_buffer_length) { + if (!urb->transfer_buffer && !urb->num_sgs && + urb->transfer_buffer_length) { dev_dbg(dev, "Null URB transfer buffer\n"); return -EINVAL; } @@ -1143,6 +1144,15 @@ static int vhci_setup(struct usb_hcd *hcd) hcd->speed = HCD_USB3; hcd->self.root_hub->speed = USB_SPEED_SUPER; } + + /* + * Support SG. + * sg_tablesize is an arbitrary value to alleviate memory pressure + * on the host. + */ + hcd->self.sg_tablesize = 32; + hcd->self.no_sg_constraint = 1; + return 0; } diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c index 44cd64518925..33f8972ba842 100644 --- a/drivers/usb/usbip/vhci_rx.c +++ b/drivers/usb/usbip/vhci_rx.c @@ -90,6 +90,9 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, if (usbip_dbg_flag_vhci_rx) usbip_dump_urb(urb); + if (urb->num_sgs) + urb->transfer_flags &= ~URB_DMA_MAP_SG; + usbip_dbg_vhci_rx("now giveback urb %u\n", pdu->base.seqnum); spin_lock_irqsave(&vhci->lock, flags); diff --git a/drivers/usb/usbip/vhci_tx.c b/drivers/usb/usbip/vhci_tx.c index 2fa26d0578d7..c3803785f6ef 100644 --- a/drivers/usb/usbip/vhci_tx.c +++ b/drivers/usb/usbip/vhci_tx.c @@ -5,6 +5,7 @@ #include <linux/kthread.h> #include <linux/slab.h> +#include <linux/scatterlist.h> #include "usbip_common.h" #include "vhci.h" @@ -50,19 +51,23 @@ static struct vhci_priv *dequeue_from_priv_tx(struct vhci_device *vdev) static int vhci_send_cmd_submit(struct vhci_device *vdev) { + struct usbip_iso_packet_descriptor *iso_buffer = NULL; struct vhci_priv *priv = NULL; + struct scatterlist *sg; struct msghdr msg; - struct kvec iov[3]; + struct kvec *iov; size_t txsize; size_t total_size = 0; + int iovnum; + int err = -ENOMEM; + int i; while ((priv = dequeue_from_priv_tx(vdev)) != NULL) { int ret; struct urb *urb = priv->urb; struct usbip_header pdu_header; - struct usbip_iso_packet_descriptor *iso_buffer = NULL; txsize = 0; memset(&pdu_header, 0, sizeof(pdu_header)); @@ -72,18 +77,45 @@ static int vhci_send_cmd_submit(struct vhci_device *vdev) usbip_dbg_vhci_tx("setup txdata urb seqnum %lu\n", priv->seqnum); + if (urb->num_sgs && usb_pipeout(urb->pipe)) + iovnum = 2 + urb->num_sgs; + else + iovnum = 3; + + iov = kcalloc(iovnum, sizeof(*iov), GFP_KERNEL); + if (!iov) { + usbip_event_add(&vdev->ud, SDEV_EVENT_ERROR_MALLOC); + return -ENOMEM; + } + + if (urb->num_sgs) + urb->transfer_flags |= URB_DMA_MAP_SG; + /* 1. setup usbip_header */ setup_cmd_submit_pdu(&pdu_header, urb); usbip_header_correct_endian(&pdu_header, 1); + iovnum = 0; - iov[0].iov_base = &pdu_header; - iov[0].iov_len = sizeof(pdu_header); + iov[iovnum].iov_base = &pdu_header; + iov[iovnum].iov_len = sizeof(pdu_header); txsize += sizeof(pdu_header); + iovnum++; /* 2. setup transfer buffer */ if (!usb_pipein(urb->pipe) && urb->transfer_buffer_length > 0) { - iov[1].iov_base = urb->transfer_buffer; - iov[1].iov_len = urb->transfer_buffer_length; + if (urb->num_sgs && + !usb_endpoint_xfer_isoc(&urb->ep->desc)) { + for_each_sg(urb->sg, sg, urb->num_sgs, i) { + iov[iovnum].iov_base = sg_virt(sg); + iov[iovnum].iov_len = sg->length; + iovnum++; + } + } else { + iov[iovnum].iov_base = urb->transfer_buffer; + iov[iovnum].iov_len = + urb->transfer_buffer_length; + iovnum++; + } txsize += urb->transfer_buffer_length; } @@ -95,23 +127,26 @@ static int vhci_send_cmd_submit(struct vhci_device *vdev) if (!iso_buffer) { usbip_event_add(&vdev->ud, SDEV_EVENT_ERROR_MALLOC); - return -1; + goto err_iso_buffer; } - iov[2].iov_base = iso_buffer; - iov[2].iov_len = len; + iov[iovnum].iov_base = iso_buffer; + iov[iovnum].iov_len = len; + iovnum++; txsize += len; } - ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 3, txsize); + ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, iovnum, + txsize); if (ret != txsize) { pr_err("sendmsg failed!, ret=%d for %zd\n", ret, txsize); - kfree(iso_buffer); usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP); - return -1; + err = -EPIPE; + goto err_tx; } + kfree(iov); kfree(iso_buffer); usbip_dbg_vhci_tx("send txdata\n"); @@ -119,6 +154,13 @@ static int vhci_send_cmd_submit(struct vhci_device *vdev) } return total_size; + +err_tx: + kfree(iso_buffer); +err_iso_buffer: + kfree(iov); + + return err; } static struct vhci_unlink *dequeue_from_unlink_tx(struct vhci_device *vdev) diff --git a/drivers/usb/usbip/vudc.h b/drivers/usb/usbip/vudc.h index cf968192e59f..1bd4bc005829 100644 --- a/drivers/usb/usbip/vudc.h +++ b/drivers/usb/usbip/vudc.h @@ -115,7 +115,7 @@ struct vudc_device { struct list_head dev_entry; }; -extern const struct attribute_group vudc_attr_group; +extern const struct attribute_group *vudc_groups[]; /* visible everywhere */ diff --git a/drivers/usb/usbip/vudc_dev.c b/drivers/usb/usbip/vudc_dev.c index a72c17ff1c6a..c8eeabdd9b56 100644 --- a/drivers/usb/usbip/vudc_dev.c +++ b/drivers/usb/usbip/vudc_dev.c @@ -616,18 +616,10 @@ int vudc_probe(struct platform_device *pdev) if (ret < 0) goto err_add_udc; - ret = sysfs_create_group(&pdev->dev.kobj, &vudc_attr_group); - if (ret) { - dev_err(&udc->pdev->dev, "create sysfs files\n"); - goto err_sysfs; - } - platform_set_drvdata(pdev, udc); return ret; -err_sysfs: - usb_del_gadget_udc(&udc->gadget); err_add_udc: cleanup_vudc_hw(udc); err_init_vudc_hw: @@ -640,7 +632,6 @@ int vudc_remove(struct platform_device *pdev) { struct vudc *udc = platform_get_drvdata(pdev); - sysfs_remove_group(&pdev->dev.kobj, &vudc_attr_group); usb_del_gadget_udc(&udc->gadget); cleanup_vudc_hw(udc); kfree(udc); diff --git a/drivers/usb/usbip/vudc_main.c b/drivers/usb/usbip/vudc_main.c index 390733e6937e..678faa82598c 100644 --- a/drivers/usb/usbip/vudc_main.c +++ b/drivers/usb/usbip/vudc_main.c @@ -22,6 +22,7 @@ static struct platform_driver vudc_driver = { .remove = vudc_remove, .driver = { .name = GADGET_NAME, + .dev_groups = vudc_groups, }, }; diff --git a/drivers/usb/usbip/vudc_sysfs.c b/drivers/usb/usbip/vudc_sysfs.c index 6dcd3ff655c3..100f680c572a 100644 --- a/drivers/usb/usbip/vudc_sysfs.c +++ b/drivers/usb/usbip/vudc_sysfs.c @@ -215,7 +215,12 @@ static struct bin_attribute *dev_bin_attrs[] = { NULL, }; -const struct attribute_group vudc_attr_group = { +static const struct attribute_group vudc_attr_group = { .attrs = dev_attrs, .bin_attrs = dev_bin_attrs, }; + +const struct attribute_group *vudc_groups[] = { + &vudc_attr_group, + NULL, +}; diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig deleted file mode 100644 index abc0f361021f..000000000000 --- a/drivers/usb/wusbcore/Kconfig +++ /dev/null @@ -1,38 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Wireless USB Core configuration -# -config USB_WUSB - tristate "Enable Wireless USB extensions" - depends on UWB - select CRYPTO - select CRYPTO_AES - select CRYPTO_CCM - help - Enable the host-side support for Wireless USB. - - To compile this support select Y (built in). It is safe to - select even if you don't have the hardware. - -config USB_WUSB_CBAF - tristate "Support WUSB Cable Based Association (CBA)" - depends on USB - help - Some WUSB devices support Cable Based Association. It's used to - enable the secure communication between the host and the - device. - - Enable this option if your WUSB device must to be connected - via wired USB before establishing a wireless link. - - It is safe to select even if you don't have a compatible - hardware. - -config USB_WUSB_CBAF_DEBUG - bool "Enable CBA debug messages" - depends on USB_WUSB_CBAF - help - Say Y here if you want the CBA to produce a bunch of debug messages - to the system log. Select this if you are having a problem with - CBA support and want to see more of what is going on. - diff --git a/drivers/usb/wusbcore/Makefile b/drivers/usb/wusbcore/Makefile deleted file mode 100644 index d604ccdd916f..000000000000 --- a/drivers/usb/wusbcore/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -ccflags-$(CONFIG_USB_WUSB_CBAF_DEBUG) := -DDEBUG - -obj-$(CONFIG_USB_WUSB) += wusbcore.o -obj-$(CONFIG_USB_HWA_HCD) += wusb-wa.o -obj-$(CONFIG_USB_WUSB_CBAF) += wusb-cbaf.o - - -wusbcore-y := \ - crypto.o \ - devconnect.o \ - dev-sysfs.o \ - mmc.o \ - pal.o \ - rh.o \ - reservation.o \ - security.o \ - wusbhc.o - -wusb-cbaf-y := cbaf.o - -wusb-wa-y := \ - wa-hc.o \ - wa-nep.o \ - wa-rpipe.o \ - wa-xfer.o diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c deleted file mode 100644 index af77064c7456..000000000000 --- a/drivers/usb/wusbcore/cbaf.c +++ /dev/null @@ -1,645 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB - Cable Based Association - * - * - * Copyright (C) 2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - * - * WUSB devices have to be paired (associated in WUSB lingo) so - * that they can connect to the system. - * - * One way of pairing is using CBA-Cable Based Association. First - * time you plug the device with a cable, association is done between - * host and device and subsequent times, you can connect wirelessly - * without having to associate again. That's the idea. - * - * This driver does nothing Earth shattering. It just provides an - * interface to chat with the wire-connected device so we can get a - * CDID (device ID) that might have been previously associated to a - * CHID (host ID) and to set up a new <CHID,CDID,CK> triplet - * (connection context), with the CK being the secret, or connection - * key. This is the pairing data. - * - * When a device with the CBA capability connects, the probe routine - * just creates a bunch of sysfs files that a user space enumeration - * manager uses to allow it to connect wirelessly to the system or not. - * - * The process goes like this: - * - * 1. Device plugs, cbaf is loaded, notifications happen. - * - * 2. The connection manager (CM) sees a device with CBAF capability - * (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE). - * - * 3. The CM writes the host name, supported band groups, and the CHID - * (host ID) into the wusb_host_name, wusb_host_band_groups and - * wusb_chid files. These get sent to the device and the CDID (if - * any) for this host is requested. - * - * 4. The CM can verify that the device's supported band groups - * (wusb_device_band_groups) are compatible with the host. - * - * 5. The CM reads the wusb_cdid file. - * - * 6. The CM looks up its database - * - * 6.1 If it has a matching CHID,CDID entry, the device has been - * authorized before (paired) and nothing further needs to be - * done. - * - * 6.2 If the CDID is zero (or the CM doesn't find a matching CDID in - * its database), the device is assumed to be not known. The CM - * may associate the host with device by: writing a randomly - * generated CDID to wusb_cdid and then a random CK to wusb_ck - * (this uploads the new CC to the device). - * - * CMD may choose to prompt the user before associating with a new - * device. - * - * 7. Device is unplugged. - * - * When the device tries to connect wirelessly, it will present its - * CDID to the WUSB host controller. The CM will query the - * database. If the CHID/CDID pair found, it will (with a 4-way - * handshake) challenge the device to demonstrate it has the CK secret - * key (from our database) without actually exchanging it. Once - * satisfied, crypto keys are derived from the CK, the device is - * connected and all communication is encrypted. - * - * References: - * [WUSB-AM] Association Models Supplement to the Certified Wireless - * Universal Serial Bus Specification, version 1.0. - */ -#include <linux/module.h> -#include <linux/ctype.h> -#include <linux/usb.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/random.h> -#include <linux/slab.h> -#include <linux/mutex.h> -#include <linux/uwb.h> -#include <linux/usb/wusb.h> -#include <linux/usb/association.h> - -#define CBA_NAME_LEN 0x40 /* [WUSB-AM] table 4-7 */ - -/* An instance of a Cable-Based-Association-Framework device */ -struct cbaf { - struct usb_device *usb_dev; - struct usb_interface *usb_iface; - void *buffer; - size_t buffer_size; - - struct wusb_ckhdid chid; - char host_name[CBA_NAME_LEN]; - u16 host_band_groups; - - struct wusb_ckhdid cdid; - char device_name[CBA_NAME_LEN]; - u16 device_band_groups; - - struct wusb_ckhdid ck; -}; - -/* - * Verify that a CBAF USB-interface has what we need - * - * According to [WUSB-AM], CBA devices should provide at least two - * interfaces: - * - RETRIEVE_HOST_INFO - * - ASSOCIATE - * - * If the device doesn't provide these interfaces, we do not know how - * to deal with it. - */ -static int cbaf_check(struct cbaf *cbaf) -{ - int result; - struct device *dev = &cbaf->usb_iface->dev; - struct wusb_cbaf_assoc_info *assoc_info; - struct wusb_cbaf_assoc_request *assoc_request; - size_t assoc_size; - void *itr, *top; - int ar_rhi = 0, ar_assoc = 0; - - result = usb_control_msg( - cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0), - CBAF_REQ_GET_ASSOCIATION_INFORMATION, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, - cbaf->buffer, cbaf->buffer_size, USB_CTRL_GET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Cannot get available association types: %d\n", - result); - return result; - } - - assoc_info = cbaf->buffer; - if (result < sizeof(*assoc_info)) { - dev_err(dev, "Not enough data to decode association info " - "header (%zu vs %zu bytes required)\n", - (size_t)result, sizeof(*assoc_info)); - return result; - } - - assoc_size = le16_to_cpu(assoc_info->Length); - if (result < assoc_size) { - dev_err(dev, "Not enough data to decode association info " - "(%zu vs %zu bytes required)\n", - (size_t)assoc_size, sizeof(*assoc_info)); - return result; - } - /* - * From now on, we just verify, but won't error out unless we - * don't find the AR_TYPE_WUSB_{RETRIEVE_HOST_INFO,ASSOCIATE} - * types. - */ - itr = cbaf->buffer + sizeof(*assoc_info); - top = cbaf->buffer + assoc_size; - dev_dbg(dev, "Found %u association requests (%zu bytes)\n", - assoc_info->NumAssociationRequests, assoc_size); - - while (itr < top) { - u16 ar_type, ar_subtype; - u32 ar_size; - const char *ar_name; - - assoc_request = itr; - - if (top - itr < sizeof(*assoc_request)) { - dev_err(dev, "Not enough data to decode association " - "request (%zu vs %zu bytes needed)\n", - top - itr, sizeof(*assoc_request)); - break; - } - - ar_type = le16_to_cpu(assoc_request->AssociationTypeId); - ar_subtype = le16_to_cpu(assoc_request->AssociationSubTypeId); - ar_size = le32_to_cpu(assoc_request->AssociationTypeInfoSize); - ar_name = "unknown"; - - switch (ar_type) { - case AR_TYPE_WUSB: - /* Verify we have what is mandated by [WUSB-AM]. */ - switch (ar_subtype) { - case AR_TYPE_WUSB_RETRIEVE_HOST_INFO: - ar_name = "RETRIEVE_HOST_INFO"; - ar_rhi = 1; - break; - case AR_TYPE_WUSB_ASSOCIATE: - /* send assoc data */ - ar_name = "ASSOCIATE"; - ar_assoc = 1; - break; - } - break; - } - - dev_dbg(dev, "Association request #%02u: 0x%04x/%04x " - "(%zu bytes): %s\n", - assoc_request->AssociationDataIndex, ar_type, - ar_subtype, (size_t)ar_size, ar_name); - - itr += sizeof(*assoc_request); - } - - if (!ar_rhi) { - dev_err(dev, "Missing RETRIEVE_HOST_INFO association " - "request\n"); - return -EINVAL; - } - if (!ar_assoc) { - dev_err(dev, "Missing ASSOCIATE association request\n"); - return -EINVAL; - } - - return 0; -} - -static const struct wusb_cbaf_host_info cbaf_host_info_defaults = { - .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, - .AssociationTypeId = cpu_to_le16(AR_TYPE_WUSB), - .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, - .AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_RETRIEVE_HOST_INFO), - .CHID_hdr = WUSB_AR_CHID, - .LangID_hdr = WUSB_AR_LangID, - .HostFriendlyName_hdr = WUSB_AR_HostFriendlyName, -}; - -/* Send WUSB host information (CHID and name) to a CBAF device */ -static int cbaf_send_host_info(struct cbaf *cbaf) -{ - struct wusb_cbaf_host_info *hi; - size_t name_len; - size_t hi_size; - - hi = cbaf->buffer; - memset(hi, 0, sizeof(*hi)); - *hi = cbaf_host_info_defaults; - hi->CHID = cbaf->chid; - hi->LangID = 0; /* FIXME: I guess... */ - strlcpy(hi->HostFriendlyName, cbaf->host_name, CBA_NAME_LEN); - name_len = strlen(cbaf->host_name); - hi->HostFriendlyName_hdr.len = cpu_to_le16(name_len); - hi_size = sizeof(*hi) + name_len; - - return usb_control_msg(cbaf->usb_dev, - usb_sndctrlpipe(cbaf->usb_dev, 0), - CBAF_REQ_SET_ASSOCIATION_RESPONSE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0x0101, - cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, - hi, hi_size, USB_CTRL_SET_TIMEOUT); -} - -/* - * Get device's information (CDID) associated to CHID - * - * The device will return it's information (CDID, name, bandgroups) - * associated to the CHID we have set before, or 0 CDID and default - * name and bandgroup if no CHID set or unknown. - */ -static int cbaf_cdid_get(struct cbaf *cbaf) -{ - int result; - struct device *dev = &cbaf->usb_iface->dev; - struct wusb_cbaf_device_info *di; - size_t needed; - - di = cbaf->buffer; - result = usb_control_msg( - cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0), - CBAF_REQ_GET_ASSOCIATION_REQUEST, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0x0200, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, - di, cbaf->buffer_size, USB_CTRL_GET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Cannot request device information: %d\n", - result); - return result; - } - - needed = result < sizeof(*di) ? sizeof(*di) : le32_to_cpu(di->Length); - if (result < needed) { - dev_err(dev, "Not enough data in DEVICE_INFO reply (%zu vs " - "%zu bytes needed)\n", (size_t)result, needed); - return -ENOENT; - } - - strlcpy(cbaf->device_name, di->DeviceFriendlyName, CBA_NAME_LEN); - cbaf->cdid = di->CDID; - cbaf->device_band_groups = le16_to_cpu(di->BandGroups); - - return 0; -} - -static ssize_t cbaf_wusb_chid_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return sprintf(buf, "%16ph\n", cbaf->chid.data); -} - -static ssize_t cbaf_wusb_chid_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx", - &cbaf->chid.data[0] , &cbaf->chid.data[1], - &cbaf->chid.data[2] , &cbaf->chid.data[3], - &cbaf->chid.data[4] , &cbaf->chid.data[5], - &cbaf->chid.data[6] , &cbaf->chid.data[7], - &cbaf->chid.data[8] , &cbaf->chid.data[9], - &cbaf->chid.data[10], &cbaf->chid.data[11], - &cbaf->chid.data[12], &cbaf->chid.data[13], - &cbaf->chid.data[14], &cbaf->chid.data[15]); - - if (result != 16) - return -EINVAL; - - result = cbaf_send_host_info(cbaf); - if (result < 0) - return result; - result = cbaf_cdid_get(cbaf); - if (result < 0) - return result; - return size; -} -static DEVICE_ATTR(wusb_chid, 0600, cbaf_wusb_chid_show, cbaf_wusb_chid_store); - -static ssize_t cbaf_wusb_host_name_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->host_name); -} - -static ssize_t cbaf_wusb_host_name_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - result = sscanf(buf, "%63s", cbaf->host_name); - if (result != 1) - return -EINVAL; - - return size; -} -static DEVICE_ATTR(wusb_host_name, 0600, cbaf_wusb_host_name_show, - cbaf_wusb_host_name_store); - -static ssize_t cbaf_wusb_host_band_groups_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->host_band_groups); -} - -static ssize_t cbaf_wusb_host_band_groups_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - u16 band_groups = 0; - - result = sscanf(buf, "%04hx", &band_groups); - if (result != 1) - return -EINVAL; - - cbaf->host_band_groups = band_groups; - - return size; -} - -static DEVICE_ATTR(wusb_host_band_groups, 0600, - cbaf_wusb_host_band_groups_show, - cbaf_wusb_host_band_groups_store); - -static const struct wusb_cbaf_device_info cbaf_device_info_defaults = { - .Length_hdr = WUSB_AR_Length, - .CDID_hdr = WUSB_AR_CDID, - .BandGroups_hdr = WUSB_AR_BandGroups, - .LangID_hdr = WUSB_AR_LangID, - .DeviceFriendlyName_hdr = WUSB_AR_DeviceFriendlyName, -}; - -static ssize_t cbaf_wusb_cdid_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return sprintf(buf, "%16ph\n", cbaf->cdid.data); -} - -static ssize_t cbaf_wusb_cdid_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - struct wusb_ckhdid cdid; - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx", - &cdid.data[0] , &cdid.data[1], - &cdid.data[2] , &cdid.data[3], - &cdid.data[4] , &cdid.data[5], - &cdid.data[6] , &cdid.data[7], - &cdid.data[8] , &cdid.data[9], - &cdid.data[10], &cdid.data[11], - &cdid.data[12], &cdid.data[13], - &cdid.data[14], &cdid.data[15]); - if (result != 16) - return -EINVAL; - - cbaf->cdid = cdid; - - return size; -} -static DEVICE_ATTR(wusb_cdid, 0600, cbaf_wusb_cdid_show, cbaf_wusb_cdid_store); - -static ssize_t cbaf_wusb_device_band_groups_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->device_band_groups); -} - -static DEVICE_ATTR(wusb_device_band_groups, 0600, - cbaf_wusb_device_band_groups_show, - NULL); - -static ssize_t cbaf_wusb_device_name_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->device_name); -} -static DEVICE_ATTR(wusb_device_name, 0600, cbaf_wusb_device_name_show, NULL); - -static const struct wusb_cbaf_cc_data cbaf_cc_data_defaults = { - .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, - .AssociationTypeId = cpu_to_le16(AR_TYPE_WUSB), - .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, - .AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_ASSOCIATE), - .Length_hdr = WUSB_AR_Length, - .Length = cpu_to_le32(sizeof(struct wusb_cbaf_cc_data)), - .ConnectionContext_hdr = WUSB_AR_ConnectionContext, - .BandGroups_hdr = WUSB_AR_BandGroups, -}; - -static const struct wusb_cbaf_cc_data_fail cbaf_cc_data_fail_defaults = { - .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, - .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, - .Length_hdr = WUSB_AR_Length, - .AssociationStatus_hdr = WUSB_AR_AssociationStatus, -}; - -/* - * Send a new CC to the device. - */ -static int cbaf_cc_upload(struct cbaf *cbaf) -{ - int result; - struct device *dev = &cbaf->usb_iface->dev; - struct wusb_cbaf_cc_data *ccd; - - ccd = cbaf->buffer; - *ccd = cbaf_cc_data_defaults; - ccd->CHID = cbaf->chid; - ccd->CDID = cbaf->cdid; - ccd->CK = cbaf->ck; - ccd->BandGroups = cpu_to_le16(cbaf->host_band_groups); - - dev_dbg(dev, "Trying to upload CC:\n"); - dev_dbg(dev, " CHID %16ph\n", ccd->CHID.data); - dev_dbg(dev, " CDID %16ph\n", ccd->CDID.data); - dev_dbg(dev, " Bandgroups 0x%04x\n", cbaf->host_band_groups); - - result = usb_control_msg( - cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0), - CBAF_REQ_SET_ASSOCIATION_RESPONSE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0x0201, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, - ccd, sizeof(*ccd), USB_CTRL_SET_TIMEOUT); - - return result; -} - -static ssize_t cbaf_wusb_ck_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - struct usb_interface *iface = to_usb_interface(dev); - struct cbaf *cbaf = usb_get_intfdata(iface); - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx", - &cbaf->ck.data[0] , &cbaf->ck.data[1], - &cbaf->ck.data[2] , &cbaf->ck.data[3], - &cbaf->ck.data[4] , &cbaf->ck.data[5], - &cbaf->ck.data[6] , &cbaf->ck.data[7], - &cbaf->ck.data[8] , &cbaf->ck.data[9], - &cbaf->ck.data[10], &cbaf->ck.data[11], - &cbaf->ck.data[12], &cbaf->ck.data[13], - &cbaf->ck.data[14], &cbaf->ck.data[15]); - if (result != 16) - return -EINVAL; - - result = cbaf_cc_upload(cbaf); - if (result < 0) - return result; - - return size; -} -static DEVICE_ATTR(wusb_ck, 0600, NULL, cbaf_wusb_ck_store); - -static struct attribute *cbaf_dev_attrs[] = { - &dev_attr_wusb_host_name.attr, - &dev_attr_wusb_host_band_groups.attr, - &dev_attr_wusb_chid.attr, - &dev_attr_wusb_cdid.attr, - &dev_attr_wusb_device_name.attr, - &dev_attr_wusb_device_band_groups.attr, - &dev_attr_wusb_ck.attr, - NULL, -}; - -static const struct attribute_group cbaf_dev_attr_group = { - .name = NULL, /* we want them in the same directory */ - .attrs = cbaf_dev_attrs, -}; - -static int cbaf_probe(struct usb_interface *iface, - const struct usb_device_id *id) -{ - struct cbaf *cbaf; - struct device *dev = &iface->dev; - int result = -ENOMEM; - - cbaf = kzalloc(sizeof(*cbaf), GFP_KERNEL); - if (cbaf == NULL) - goto error_kzalloc; - cbaf->buffer = kmalloc(512, GFP_KERNEL); - if (cbaf->buffer == NULL) - goto error_kmalloc_buffer; - - cbaf->buffer_size = 512; - cbaf->usb_dev = usb_get_dev(interface_to_usbdev(iface)); - cbaf->usb_iface = usb_get_intf(iface); - result = cbaf_check(cbaf); - if (result < 0) { - dev_err(dev, "This device is not WUSB-CBAF compliant and is not supported yet.\n"); - goto error_check; - } - - result = sysfs_create_group(&dev->kobj, &cbaf_dev_attr_group); - if (result < 0) { - dev_err(dev, "Can't register sysfs attr group: %d\n", result); - goto error_create_group; - } - usb_set_intfdata(iface, cbaf); - return 0; - -error_create_group: -error_check: - usb_put_intf(iface); - usb_put_dev(cbaf->usb_dev); - kfree(cbaf->buffer); -error_kmalloc_buffer: - kfree(cbaf); -error_kzalloc: - return result; -} - -static void cbaf_disconnect(struct usb_interface *iface) -{ - struct cbaf *cbaf = usb_get_intfdata(iface); - struct device *dev = &iface->dev; - sysfs_remove_group(&dev->kobj, &cbaf_dev_attr_group); - usb_set_intfdata(iface, NULL); - usb_put_intf(iface); - usb_put_dev(cbaf->usb_dev); - kfree(cbaf->buffer); - /* paranoia: clean up crypto keys */ - kzfree(cbaf); -} - -static const struct usb_device_id cbaf_id_table[] = { - { USB_INTERFACE_INFO(0xef, 0x03, 0x01), }, - { }, -}; -MODULE_DEVICE_TABLE(usb, cbaf_id_table); - -static struct usb_driver cbaf_driver = { - .name = "wusb-cbaf", - .id_table = cbaf_id_table, - .probe = cbaf_probe, - .disconnect = cbaf_disconnect, -}; - -module_usb_driver(cbaf_driver); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Wireless USB Cable Based Association"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c deleted file mode 100644 index 9ee66483ee54..000000000000 --- a/drivers/usb/wusbcore/crypto.c +++ /dev/null @@ -1,441 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Ultra Wide Band - * AES-128 CCM Encryption - * - * Copyright (C) 2007 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * We don't do any encryption here; we use the Linux Kernel's AES-128 - * crypto modules to construct keys and payload blocks in a way - * defined by WUSB1.0[6]. Check the erratas, as typos are are patched - * there. - * - * Thanks a zillion to John Keys for his help and clarifications over - * the designed-by-a-committee text. - * - * So the idea is that there is this basic Pseudo-Random-Function - * defined in WUSB1.0[6.5] which is the core of everything. It works - * by tweaking some blocks, AES crypting them and then xoring - * something else with them (this seems to be called CBC(AES) -- can - * you tell I know jack about crypto?). So we just funnel it into the - * Linux Crypto API. - * - * We leave a crypto test module so we can verify that vectors match, - * every now and then. - * - * Block size: 16 bytes -- AES seems to do things in 'block sizes'. I - * am learning a lot... - * - * Conveniently, some data structures that need to be - * funneled through AES are...16 bytes in size! - */ - -#include <crypto/aes.h> -#include <crypto/algapi.h> -#include <crypto/hash.h> -#include <crypto/skcipher.h> -#include <linux/crypto.h> -#include <linux/module.h> -#include <linux/err.h> -#include <linux/uwb.h> -#include <linux/slab.h> -#include <linux/usb/wusb.h> -#include <linux/scatterlist.h> - -static int debug_crypto_verify; - -module_param(debug_crypto_verify, int, 0); -MODULE_PARM_DESC(debug_crypto_verify, "verify the key generation algorithms"); - -static void wusb_key_dump(const void *buf, size_t len) -{ - print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_OFFSET, 16, 1, - buf, len, 0); -} - -/* - * Block of data, as understood by AES-CCM - * - * The code assumes this structure is nothing but a 16 byte array - * (packed in a struct to avoid common mess ups that I usually do with - * arrays and enforcing type checking). - */ -struct aes_ccm_block { - u8 data[16]; -} __attribute__((packed)); - -/* - * Counter-mode Blocks (WUSB1.0[6.4]) - * - * According to CCM (or so it seems), for the purpose of calculating - * the MIC, the message is broken in N counter-mode blocks, B0, B1, - * ... BN. - * - * B0 contains flags, the CCM nonce and l(m). - * - * B1 contains l(a), the MAC header, the encryption offset and padding. - * - * If EO is nonzero, additional blocks are built from payload bytes - * until EO is exhausted (FIXME: padding to 16 bytes, I guess). The - * padding is not xmitted. - */ - -/* WUSB1.0[T6.4] */ -struct aes_ccm_b0 { - u8 flags; /* 0x59, per CCM spec */ - struct aes_ccm_nonce ccm_nonce; - __be16 lm; -} __attribute__((packed)); - -/* WUSB1.0[T6.5] */ -struct aes_ccm_b1 { - __be16 la; - u8 mac_header[10]; - __le16 eo; - u8 security_reserved; /* This is always zero */ - u8 padding; /* 0 */ -} __attribute__((packed)); - -/* - * Encryption Blocks (WUSB1.0[6.4.4]) - * - * CCM uses Ax blocks to generate a keystream with which the MIC and - * the message's payload are encoded. A0 always encrypts/decrypts the - * MIC. Ax (x>0) are used for the successive payload blocks. - * - * The x is the counter, and is increased for each block. - */ -struct aes_ccm_a { - u8 flags; /* 0x01, per CCM spec */ - struct aes_ccm_nonce ccm_nonce; - __be16 counter; /* Value of x */ -} __attribute__((packed)); - -/* Scratch space for MAC calculations. */ -struct wusb_mac_scratch { - struct aes_ccm_b0 b0; - struct aes_ccm_b1 b1; - struct aes_ccm_a ax; -}; - -/* - * CC-MAC function WUSB1.0[6.5] - * - * Take a data string and produce the encrypted CBC Counter-mode MIC - * - * Note the names for most function arguments are made to (more or - * less) match those used in the pseudo-function definition given in - * WUSB1.0[6.5]. - * - * @tfm_cbc: CBC(AES) blkcipher handle (initialized) - * - * @tfm_aes: AES cipher handle (initialized) - * - * @mic: buffer for placing the computed MIC (Message Integrity - * Code). This is exactly 8 bytes, and we expect the buffer to - * be at least eight bytes in length. - * - * @key: 128 bit symmetric key - * - * @n: CCM nonce - * - * @a: ASCII string, 14 bytes long (I guess zero padded if needed; - * we use exactly 14 bytes). - * - * @b: data stream to be processed - * - * @blen: size of b... - * - * Still not very clear how this is done, but looks like this: we - * create block B0 (as WUSB1.0[6.5] says), then we AES-crypt it with - * @key. We bytewise xor B0 with B1 (1) and AES-crypt that. Then we - * take the payload and divide it in blocks (16 bytes), xor them with - * the previous crypto result (16 bytes) and crypt it, repeat the next - * block with the output of the previous one, rinse wash. So we use - * the CBC-MAC(AES) shash, that does precisely that. The IV (Initial - * Vector) is 16 bytes and is set to zero, so - * - * (1) Created as 6.5 says, again, using as l(a) 'Blen + 14', and - * using the 14 bytes of @a to fill up - * b1.{mac_header,e0,security_reserved,padding}. - * - * NOTE: The definition of l(a) in WUSB1.0[6.5] vs the definition of - * l(m) is orthogonal, they bear no relationship, so it is not - * in conflict with the parameter's relation that - * WUSB1.0[6.4.2]) defines. - * - * NOTE: WUSB1.0[A.1]: Host Nonce is missing a nibble? (1e); fixed in - * first errata released on 2005/07. - * - * NOTE: we need to clean IV to zero at each invocation to make sure - * we start with a fresh empty Initial Vector, so that the CBC - * works ok. - * - * NOTE: blen is not aligned to a block size, we'll pad zeros, that's - * what sg[4] is for. Maybe there is a smarter way to do this. - */ -static int wusb_ccm_mac(struct crypto_shash *tfm_cbcmac, - struct wusb_mac_scratch *scratch, - void *mic, - const struct aes_ccm_nonce *n, - const struct aes_ccm_label *a, const void *b, - size_t blen) -{ - SHASH_DESC_ON_STACK(desc, tfm_cbcmac); - u8 iv[AES_BLOCK_SIZE]; - - /* - * These checks should be compile time optimized out - * ensure @a fills b1's mac_header and following fields - */ - BUILD_BUG_ON(sizeof(*a) != sizeof(scratch->b1) - sizeof(scratch->b1.la)); - BUILD_BUG_ON(sizeof(scratch->b0) != sizeof(struct aes_ccm_block)); - BUILD_BUG_ON(sizeof(scratch->b1) != sizeof(struct aes_ccm_block)); - BUILD_BUG_ON(sizeof(scratch->ax) != sizeof(struct aes_ccm_block)); - - /* Setup B0 */ - scratch->b0.flags = 0x59; /* Format B0 */ - scratch->b0.ccm_nonce = *n; - scratch->b0.lm = cpu_to_be16(0); /* WUSB1.0[6.5] sez l(m) is 0 */ - - /* Setup B1 - * - * The WUSB spec is anything but clear! WUSB1.0[6.5] - * says that to initialize B1 from A with 'l(a) = blen + - * 14'--after clarification, it means to use A's contents - * for MAC Header, EO, sec reserved and padding. - */ - scratch->b1.la = cpu_to_be16(blen + 14); - memcpy(&scratch->b1.mac_header, a, sizeof(*a)); - - desc->tfm = tfm_cbcmac; - crypto_shash_init(desc); - crypto_shash_update(desc, (u8 *)&scratch->b0, sizeof(scratch->b0) + - sizeof(scratch->b1)); - crypto_shash_finup(desc, b, blen, iv); - - /* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5] - * The procedure is to AES crypt the A0 block and XOR the MIC - * Tag against it; we only do the first 8 bytes and place it - * directly in the destination buffer. - */ - scratch->ax.flags = 0x01; /* as per WUSB 1.0 spec */ - scratch->ax.ccm_nonce = *n; - scratch->ax.counter = 0; - - /* reuse the CBC-MAC transform to perform the single block encryption */ - crypto_shash_digest(desc, (u8 *)&scratch->ax, sizeof(scratch->ax), - (u8 *)&scratch->ax); - - crypto_xor_cpy(mic, (u8 *)&scratch->ax, iv, 8); - - return 8; -} - -/* - * WUSB Pseudo Random Function (WUSB1.0[6.5]) - * - * @b: buffer to the source data; cannot be a global or const local - * (will confuse the scatterlists) - */ -ssize_t wusb_prf(void *out, size_t out_size, - const u8 key[16], const struct aes_ccm_nonce *_n, - const struct aes_ccm_label *a, - const void *b, size_t blen, size_t len) -{ - ssize_t result, bytes = 0, bitr; - struct aes_ccm_nonce n = *_n; - struct crypto_shash *tfm_cbcmac; - struct wusb_mac_scratch scratch; - u64 sfn = 0; - __le64 sfn_le; - - tfm_cbcmac = crypto_alloc_shash("cbcmac(aes)", 0, 0); - if (IS_ERR(tfm_cbcmac)) { - result = PTR_ERR(tfm_cbcmac); - printk(KERN_ERR "E: can't load CBCMAC-AES: %d\n", (int)result); - goto error_alloc_cbcmac; - } - - result = crypto_shash_setkey(tfm_cbcmac, key, AES_BLOCK_SIZE); - if (result < 0) { - printk(KERN_ERR "E: can't set CBCMAC-AES key: %d\n", (int)result); - goto error_setkey_cbcmac; - } - - for (bitr = 0; bitr < (len + 63) / 64; bitr++) { - sfn_le = cpu_to_le64(sfn++); - memcpy(&n.sfn, &sfn_le, sizeof(n.sfn)); /* n.sfn++... */ - result = wusb_ccm_mac(tfm_cbcmac, &scratch, out + bytes, - &n, a, b, blen); - if (result < 0) - goto error_ccm_mac; - bytes += result; - } - result = bytes; - -error_ccm_mac: -error_setkey_cbcmac: - crypto_free_shash(tfm_cbcmac); -error_alloc_cbcmac: - return result; -} - -/* WUSB1.0[A.2] test vectors */ -static const u8 stv_hsmic_key[16] = { - 0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d, - 0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f -}; - -static const struct aes_ccm_nonce stv_hsmic_n = { - .sfn = { 0 }, - .tkid = { 0x76, 0x98, 0x01, }, - .dest_addr = { .data = { 0xbe, 0x00 } }, - .src_addr = { .data = { 0x76, 0x98 } }, -}; - -/* - * Out-of-band MIC Generation verification code - * - */ -static int wusb_oob_mic_verify(void) -{ - int result; - u8 mic[8]; - /* WUSB1.0[A.2] test vectors */ - static const struct usb_handshake stv_hsmic_hs = { - .bMessageNumber = 2, - .bStatus = 00, - .tTKID = { 0x76, 0x98, 0x01 }, - .bReserved = 00, - .CDID = { 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, - 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b, - 0x3c, 0x3d, 0x3e, 0x3f }, - .nonce = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, - 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, - 0x2c, 0x2d, 0x2e, 0x2f }, - .MIC = { 0x75, 0x6a, 0x97, 0x51, 0x0c, 0x8c, - 0x14, 0x7b }, - }; - size_t hs_size; - - result = wusb_oob_mic(mic, stv_hsmic_key, &stv_hsmic_n, &stv_hsmic_hs); - if (result < 0) - printk(KERN_ERR "E: WUSB OOB MIC test: failed: %d\n", result); - else if (memcmp(stv_hsmic_hs.MIC, mic, sizeof(mic))) { - printk(KERN_ERR "E: OOB MIC test: " - "mismatch between MIC result and WUSB1.0[A2]\n"); - hs_size = sizeof(stv_hsmic_hs) - sizeof(stv_hsmic_hs.MIC); - printk(KERN_ERR "E: Handshake2 in: (%zu bytes)\n", hs_size); - wusb_key_dump(&stv_hsmic_hs, hs_size); - printk(KERN_ERR "E: CCM Nonce in: (%zu bytes)\n", - sizeof(stv_hsmic_n)); - wusb_key_dump(&stv_hsmic_n, sizeof(stv_hsmic_n)); - printk(KERN_ERR "E: MIC out:\n"); - wusb_key_dump(mic, sizeof(mic)); - printk(KERN_ERR "E: MIC out (from WUSB1.0[A.2]):\n"); - wusb_key_dump(stv_hsmic_hs.MIC, sizeof(stv_hsmic_hs.MIC)); - result = -EINVAL; - } else - result = 0; - return result; -} - -/* - * Test vectors for Key derivation - * - * These come from WUSB1.0[6.5.1], the vectors in WUSB1.0[A.1] - * (errata corrected in 2005/07). - */ -static const u8 stv_key_a1[16] __attribute__ ((__aligned__(4))) = { - 0xf0, 0xe1, 0xd2, 0xc3, 0xb4, 0xa5, 0x96, 0x87, - 0x78, 0x69, 0x5a, 0x4b, 0x3c, 0x2d, 0x1e, 0x0f -}; - -static const struct aes_ccm_nonce stv_keydvt_n_a1 = { - .sfn = { 0 }, - .tkid = { 0x76, 0x98, 0x01, }, - .dest_addr = { .data = { 0xbe, 0x00 } }, - .src_addr = { .data = { 0x76, 0x98 } }, -}; - -static const struct wusb_keydvt_out stv_keydvt_out_a1 = { - .kck = { - 0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d, - 0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f - }, - .ptk = { - 0xc8, 0x70, 0x62, 0x82, 0xb6, 0x7c, 0xe9, 0x06, - 0x7b, 0xc5, 0x25, 0x69, 0xf2, 0x36, 0x61, 0x2d - } -}; - -/* - * Performa a test to make sure we match the vectors defined in - * WUSB1.0[A.1](Errata2006/12) - */ -static int wusb_key_derive_verify(void) -{ - int result = 0; - struct wusb_keydvt_out keydvt_out; - /* These come from WUSB1.0[A.1] + 2006/12 errata */ - static const struct wusb_keydvt_in stv_keydvt_in_a1 = { - .hnonce = { - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f - }, - .dnonce = { - 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, - 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f - } - }; - - result = wusb_key_derive(&keydvt_out, stv_key_a1, &stv_keydvt_n_a1, - &stv_keydvt_in_a1); - if (result < 0) - printk(KERN_ERR "E: WUSB key derivation test: " - "derivation failed: %d\n", result); - if (memcmp(&stv_keydvt_out_a1, &keydvt_out, sizeof(keydvt_out))) { - printk(KERN_ERR "E: WUSB key derivation test: " - "mismatch between key derivation result " - "and WUSB1.0[A1] Errata 2006/12\n"); - printk(KERN_ERR "E: keydvt in: key\n"); - wusb_key_dump(stv_key_a1, sizeof(stv_key_a1)); - printk(KERN_ERR "E: keydvt in: nonce\n"); - wusb_key_dump(&stv_keydvt_n_a1, sizeof(stv_keydvt_n_a1)); - printk(KERN_ERR "E: keydvt in: hnonce & dnonce\n"); - wusb_key_dump(&stv_keydvt_in_a1, sizeof(stv_keydvt_in_a1)); - printk(KERN_ERR "E: keydvt out: KCK\n"); - wusb_key_dump(&keydvt_out.kck, sizeof(keydvt_out.kck)); - printk(KERN_ERR "E: keydvt out: PTK\n"); - wusb_key_dump(&keydvt_out.ptk, sizeof(keydvt_out.ptk)); - result = -EINVAL; - } else - result = 0; - return result; -} - -/* - * Initialize crypto system - * - * FIXME: we do nothing now, other than verifying. Later on we'll - * cache the encryption stuff, so that's why we have a separate init. - */ -int wusb_crypto_init(void) -{ - int result; - - if (debug_crypto_verify) { - result = wusb_key_derive_verify(); - if (result < 0) - return result; - return wusb_oob_mic_verify(); - } - return 0; -} - -void wusb_crypto_exit(void) -{ - /* FIXME: free cached crypto transforms */ -} diff --git a/drivers/usb/wusbcore/dev-sysfs.c b/drivers/usb/wusbcore/dev-sysfs.c deleted file mode 100644 index 67b0a4c412b2..000000000000 --- a/drivers/usb/wusbcore/dev-sysfs.c +++ /dev/null @@ -1,124 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB devices - * sysfs bindings - * - * Copyright (C) 2007 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * Get them out of the way... - */ - -#include <linux/jiffies.h> -#include <linux/ctype.h> -#include <linux/workqueue.h> -#include "wusbhc.h" - -static ssize_t wusb_disconnect_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct usb_device *usb_dev; - struct wusbhc *wusbhc; - unsigned command; - u8 port_idx; - - if (sscanf(buf, "%u", &command) != 1) - return -EINVAL; - if (command == 0) - return size; - usb_dev = to_usb_device(dev); - wusbhc = wusbhc_get_by_usb_dev(usb_dev); - if (wusbhc == NULL) - return -ENODEV; - - mutex_lock(&wusbhc->mutex); - port_idx = wusb_port_no_to_idx(usb_dev->portnum); - __wusbhc_dev_disable(wusbhc, port_idx); - mutex_unlock(&wusbhc->mutex); - wusbhc_put(wusbhc); - return size; -} -static DEVICE_ATTR_WO(wusb_disconnect); - -static ssize_t wusb_cdid_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - ssize_t result; - struct wusb_dev *wusb_dev; - - wusb_dev = wusb_dev_get_by_usb_dev(to_usb_device(dev)); - if (wusb_dev == NULL) - return -ENODEV; - result = sprintf(buf, "%16ph\n", wusb_dev->cdid.data); - wusb_dev_put(wusb_dev); - return result; -} -static DEVICE_ATTR_RO(wusb_cdid); - -static ssize_t wusb_ck_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - int result; - struct usb_device *usb_dev; - struct wusbhc *wusbhc; - struct wusb_ckhdid ck; - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx\n", - &ck.data[0] , &ck.data[1], - &ck.data[2] , &ck.data[3], - &ck.data[4] , &ck.data[5], - &ck.data[6] , &ck.data[7], - &ck.data[8] , &ck.data[9], - &ck.data[10], &ck.data[11], - &ck.data[12], &ck.data[13], - &ck.data[14], &ck.data[15]); - if (result != 16) - return -EINVAL; - - usb_dev = to_usb_device(dev); - wusbhc = wusbhc_get_by_usb_dev(usb_dev); - if (wusbhc == NULL) - return -ENODEV; - result = wusb_dev_4way_handshake(wusbhc, usb_dev->wusb_dev, &ck); - memzero_explicit(&ck, sizeof(ck)); - wusbhc_put(wusbhc); - return result < 0 ? result : size; -} -static DEVICE_ATTR_WO(wusb_ck); - -static struct attribute *wusb_dev_attrs[] = { - &dev_attr_wusb_disconnect.attr, - &dev_attr_wusb_cdid.attr, - &dev_attr_wusb_ck.attr, - NULL, -}; - -static const struct attribute_group wusb_dev_attr_group = { - .name = NULL, /* we want them in the same directory */ - .attrs = wusb_dev_attrs, -}; - -int wusb_dev_sysfs_add(struct wusbhc *wusbhc, struct usb_device *usb_dev, - struct wusb_dev *wusb_dev) -{ - int result = sysfs_create_group(&usb_dev->dev.kobj, - &wusb_dev_attr_group); - struct device *dev = &usb_dev->dev; - if (result < 0) - dev_err(dev, "Cannot register WUSB-dev attributes: %d\n", - result); - return result; -} - -void wusb_dev_sysfs_rm(struct wusb_dev *wusb_dev) -{ - struct usb_device *usb_dev = wusb_dev->usb_dev; - if (usb_dev) - sysfs_remove_group(&usb_dev->dev.kobj, &wusb_dev_attr_group); -} diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c deleted file mode 100644 index a93837d57d53..000000000000 --- a/drivers/usb/wusbcore/devconnect.c +++ /dev/null @@ -1,1085 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) - * Device Connect handling - * - * Copyright (C) 2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - * FIXME: this file needs to be broken up, it's grown too big - * - * - * WUSB1.0[7.1, 7.5.1, ] - * - * WUSB device connection is kind of messy. Some background: - * - * When a device wants to connect it scans the UWB radio channels - * looking for a WUSB Channel; a WUSB channel is defined by MMCs - * (Micro Managed Commands or something like that) [see - * Design-overview for more on this] . - * - * So, device scans the radio, finds MMCs and thus a host and checks - * when the next DNTS is. It sends a Device Notification Connect - * (DN_Connect); the host picks it up (through nep.c and notif.c, ends - * up in wusb_devconnect_ack(), which creates a wusb_dev structure in - * wusbhc->port[port_number].wusb_dev), assigns an unauth address - * to the device (this means from 0x80 to 0xfe) and sends, in the MMC - * a Connect Ack Information Element (ConnAck IE). - * - * So now the device now has a WUSB address. From now on, we use - * that to talk to it in the RPipes. - * - * ASSUMPTIONS: - * - * - We use the the as device address the port number where it is - * connected (port 0 doesn't exist). For unauth, it is 128 + that. - * - * ROADMAP: - * - * This file contains the logic for doing that--entry points: - * - * wusb_devconnect_ack() Ack a device until _acked() called. - * Called by notif.c:wusb_handle_dn_connect() - * when a DN_Connect is received. - * - * wusb_devconnect_acked() Ack done, release resources. - * - * wusb_handle_dn_alive() Called by notif.c:wusb_handle_dn() - * for processing a DN_Alive pong from a device. - * - * wusb_handle_dn_disconnect()Called by notif.c:wusb_handle_dn() to - * process a disconenct request from a - * device. - * - * __wusb_dev_disable() Called by rh.c:wusbhc_rh_clear_port_feat() when - * disabling a port. - * - * wusb_devconnect_create() Called when creating the host by - * lc.c:wusbhc_create(). - * - * wusb_devconnect_destroy() Cleanup called removing the host. Called - * by lc.c:wusbhc_destroy(). - * - * Each Wireless USB host maintains a list of DN_Connect requests - * (actually we maintain a list of pending Connect Acks, the - * wusbhc->ca_list). - * - * LIFE CYCLE OF port->wusb_dev - * - * Before the @wusbhc structure put()s the reference it owns for - * port->wusb_dev [and clean the wusb_dev pointer], it needs to - * lock @wusbhc->mutex. - */ - -#include <linux/jiffies.h> -#include <linux/ctype.h> -#include <linux/slab.h> -#include <linux/workqueue.h> -#include <linux/export.h> -#include "wusbhc.h" - -static void wusbhc_devconnect_acked_work(struct work_struct *work); - -static void wusb_dev_free(struct wusb_dev *wusb_dev) -{ - kfree(wusb_dev); -} - -static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc) -{ - struct wusb_dev *wusb_dev; - - wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL); - if (wusb_dev == NULL) - goto err; - - wusb_dev->wusbhc = wusbhc; - - INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work); - - return wusb_dev; -err: - wusb_dev_free(wusb_dev); - return NULL; -} - - -/* - * Using the Connect-Ack list, fill out the @wusbhc Connect-Ack WUSB IE - * properly so that it can be added to the MMC. - * - * We just get the @wusbhc->ca_list and fill out the first four ones or - * less (per-spec WUSB1.0[7.5, before T7-38). If the ConnectAck WUSB - * IE is not allocated, we alloc it. - * - * @wusbhc->mutex must be taken - */ -static void wusbhc_fill_cack_ie(struct wusbhc *wusbhc) -{ - unsigned cnt; - struct wusb_dev *dev_itr; - struct wuie_connect_ack *cack_ie; - - cack_ie = &wusbhc->cack_ie; - cnt = 0; - list_for_each_entry(dev_itr, &wusbhc->cack_list, cack_node) { - cack_ie->blk[cnt].CDID = dev_itr->cdid; - cack_ie->blk[cnt].bDeviceAddress = dev_itr->addr; - if (++cnt >= WUIE_ELT_MAX) - break; - } - cack_ie->hdr.bLength = sizeof(cack_ie->hdr) - + cnt * sizeof(cack_ie->blk[0]); -} - -/* - * Register a new device that wants to connect - * - * A new device wants to connect, so we add it to the Connect-Ack - * list. We give it an address in the unauthorized range (bit 8 set); - * user space will have to drive authorization further on. - * - * @dev_addr: address to use for the device (which is also the port - * number). - * - * @wusbhc->mutex must be taken - */ -static struct wusb_dev *wusbhc_cack_add(struct wusbhc *wusbhc, - struct wusb_dn_connect *dnc, - const char *pr_cdid, u8 port_idx) -{ - struct device *dev = wusbhc->dev; - struct wusb_dev *wusb_dev; - int new_connection = wusb_dn_connect_new_connection(dnc); - u8 dev_addr; - int result; - - /* Is it registered already? */ - list_for_each_entry(wusb_dev, &wusbhc->cack_list, cack_node) - if (!memcmp(&wusb_dev->cdid, &dnc->CDID, - sizeof(wusb_dev->cdid))) - return wusb_dev; - /* We don't have it, create an entry, register it */ - wusb_dev = wusb_dev_alloc(wusbhc); - if (wusb_dev == NULL) - return NULL; - wusb_dev_init(wusb_dev); - wusb_dev->cdid = dnc->CDID; - wusb_dev->port_idx = port_idx; - - /* - * Devices are always available within the cluster reservation - * and since the hardware will take the intersection of the - * per-device availability and the cluster reservation, the - * per-device availability can simply be set to always - * available. - */ - bitmap_fill(wusb_dev->availability.bm, UWB_NUM_MAS); - - /* FIXME: handle reconnects instead of assuming connects are - always new. */ - if (1 && new_connection == 0) - new_connection = 1; - if (new_connection) { - dev_addr = (port_idx + 2) | WUSB_DEV_ADDR_UNAUTH; - - dev_info(dev, "Connecting new WUSB device to address %u, " - "port %u\n", dev_addr, port_idx); - - result = wusb_set_dev_addr(wusbhc, wusb_dev, dev_addr); - if (result < 0) - return NULL; - } - wusb_dev->entry_ts = jiffies; - list_add_tail(&wusb_dev->cack_node, &wusbhc->cack_list); - wusbhc->cack_count++; - wusbhc_fill_cack_ie(wusbhc); - - return wusb_dev; -} - -/* - * Remove a Connect-Ack context entry from the HCs view - * - * @wusbhc->mutex must be taken - */ -static void wusbhc_cack_rm(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - list_del_init(&wusb_dev->cack_node); - wusbhc->cack_count--; - wusbhc_fill_cack_ie(wusbhc); -} - -/* - * @wusbhc->mutex must be taken */ -static -void wusbhc_devconnect_acked(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - wusbhc_cack_rm(wusbhc, wusb_dev); - if (wusbhc->cack_count) - wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr); - else - wusbhc_mmcie_rm(wusbhc, &wusbhc->cack_ie.hdr); -} - -static void wusbhc_devconnect_acked_work(struct work_struct *work) -{ - struct wusb_dev *wusb_dev = container_of(work, struct wusb_dev, - devconnect_acked_work); - struct wusbhc *wusbhc = wusb_dev->wusbhc; - - mutex_lock(&wusbhc->mutex); - wusbhc_devconnect_acked(wusbhc, wusb_dev); - mutex_unlock(&wusbhc->mutex); - - wusb_dev_put(wusb_dev); -} - -/* - * Ack a device for connection - * - * FIXME: docs - * - * @pr_cdid: Printable CDID...hex Use @dnc->cdid for the real deal. - * - * So we get the connect ack IE (may have been allocated already), - * find an empty connect block, an empty virtual port, create an - * address with it (see below), make it an unauth addr [bit 7 set] and - * set the MMC. - * - * Addresses: because WUSB hosts have no downstream hubs, we can do a - * 1:1 mapping between 'port number' and device - * address. This simplifies many things, as during this - * initial connect phase the USB stack has no knowledge of - * the device and hasn't assigned an address yet--we know - * USB's choose_address() will use the same heuristics we - * use here, so we can assume which address will be assigned. - * - * USB stack always assigns address 1 to the root hub, so - * to the port number we add 2 (thus virtual port #0 is - * addr #2). - * - * @wusbhc shall be referenced - */ -static -void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc, - const char *pr_cdid) -{ - int result; - struct device *dev = wusbhc->dev; - struct wusb_dev *wusb_dev; - struct wusb_port *port; - unsigned idx; - - mutex_lock(&wusbhc->mutex); - - /* Check we are not handling it already */ - for (idx = 0; idx < wusbhc->ports_max; idx++) { - port = wusb_port_by_idx(wusbhc, idx); - if (port->wusb_dev - && memcmp(&dnc->CDID, &port->wusb_dev->cdid, sizeof(dnc->CDID)) == 0) - goto error_unlock; - } - /* Look up those fake ports we have for a free one */ - for (idx = 0; idx < wusbhc->ports_max; idx++) { - port = wusb_port_by_idx(wusbhc, idx); - if ((port->status & USB_PORT_STAT_POWER) - && !(port->status & USB_PORT_STAT_CONNECTION)) - break; - } - if (idx >= wusbhc->ports_max) { - dev_err(dev, "Host controller can't connect more devices " - "(%u already connected); device %s rejected\n", - wusbhc->ports_max, pr_cdid); - /* NOTE: we could send a WUIE_Disconnect here, but we haven't - * event acked, so the device will eventually timeout the - * connection, right? */ - goto error_unlock; - } - - /* Make sure we are using no crypto on that "virtual port" */ - wusbhc->set_ptk(wusbhc, idx, 0, NULL, 0); - - /* Grab a filled in Connect-Ack context, fill out the - * Connect-Ack Wireless USB IE, set the MMC */ - wusb_dev = wusbhc_cack_add(wusbhc, dnc, pr_cdid, idx); - if (wusb_dev == NULL) - goto error_unlock; - result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr); - if (result < 0) - goto error_unlock; - /* Give the device at least 2ms (WUSB1.0[7.5.1p3]), let's do - * three for a good measure */ - msleep(3); - port->wusb_dev = wusb_dev; - port->status |= USB_PORT_STAT_CONNECTION; - port->change |= USB_PORT_STAT_C_CONNECTION; - /* Now the port status changed to connected; hub_wq will - * pick the change up and try to reset the port to bring it to - * the enabled state--so this process returns up to the stack - * and it calls back into wusbhc_rh_port_reset(). - */ -error_unlock: - mutex_unlock(&wusbhc->mutex); - return; - -} - -/* - * Disconnect a Wireless USB device from its fake port - * - * Marks the port as disconnected so that hub_wq can pick up the change - * and drops our knowledge about the device. - * - * Assumes there is a device connected - * - * @port_index: zero based port number - * - * NOTE: @wusbhc->mutex is locked - * - * WARNING: From here it is not very safe to access anything hanging off - * wusb_dev - */ -static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, - struct wusb_port *port) -{ - struct wusb_dev *wusb_dev = port->wusb_dev; - - port->status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE - | USB_PORT_STAT_SUSPEND | USB_PORT_STAT_RESET - | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); - port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE; - if (wusb_dev) { - dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx); - if (!list_empty(&wusb_dev->cack_node)) - list_del_init(&wusb_dev->cack_node); - /* For the one in cack_add() */ - wusb_dev_put(wusb_dev); - } - port->wusb_dev = NULL; - - /* After a device disconnects, change the GTK (see [WUSB] - * section 6.2.11.2). */ - if (wusbhc->active) - wusbhc_gtk_rekey(wusbhc); - - /* The Wireless USB part has forgotten about the device already; now - * hub_wq's timer will pick up the disconnection and remove the USB - * device from the system - */ -} - -/* - * Refresh the list of keep alives to emit in the MMC - * - * We only publish the first four devices that have a coming timeout - * condition. Then when we are done processing those, we go for the - * next ones. We ignore the ones that have timed out already (they'll - * be purged). - * - * This might cause the first devices to timeout the last devices in - * the port array...FIXME: come up with a better algorithm? - * - * Note we can't do much about MMC's ops errors; we hope next refresh - * will kind of handle it. - * - * NOTE: @wusbhc->mutex is locked - */ -static void __wusbhc_keep_alive(struct wusbhc *wusbhc) -{ - struct device *dev = wusbhc->dev; - unsigned cnt; - struct wusb_dev *wusb_dev; - struct wusb_port *wusb_port; - struct wuie_keep_alive *ie = &wusbhc->keep_alive_ie; - unsigned keep_alives, old_keep_alives; - - old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr); - keep_alives = 0; - for (cnt = 0; - keep_alives < WUIE_ELT_MAX && cnt < wusbhc->ports_max; - cnt++) { - unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout); - - wusb_port = wusb_port_by_idx(wusbhc, cnt); - wusb_dev = wusb_port->wusb_dev; - - if (wusb_dev == NULL) - continue; - if (wusb_dev->usb_dev == NULL) - continue; - - if (time_after(jiffies, wusb_dev->entry_ts + tt)) { - dev_err(dev, "KEEPALIVE: device %u timed out\n", - wusb_dev->addr); - __wusbhc_dev_disconnect(wusbhc, wusb_port); - } else if (time_after(jiffies, wusb_dev->entry_ts + tt/3)) { - /* Approaching timeout cut off, need to refresh */ - ie->bDeviceAddress[keep_alives++] = wusb_dev->addr; - } - } - if (keep_alives & 0x1) /* pad to even number ([WUSB] section 7.5.9) */ - ie->bDeviceAddress[keep_alives++] = 0x7f; - ie->hdr.bLength = sizeof(ie->hdr) + - keep_alives*sizeof(ie->bDeviceAddress[0]); - if (keep_alives > 0) - wusbhc_mmcie_set(wusbhc, 10, 5, &ie->hdr); - else if (old_keep_alives != 0) - wusbhc_mmcie_rm(wusbhc, &ie->hdr); -} - -/* - * Do a run through all devices checking for timeouts - */ -static void wusbhc_keep_alive_run(struct work_struct *ws) -{ - struct delayed_work *dw = to_delayed_work(ws); - struct wusbhc *wusbhc = container_of(dw, struct wusbhc, keep_alive_timer); - - mutex_lock(&wusbhc->mutex); - __wusbhc_keep_alive(wusbhc); - mutex_unlock(&wusbhc->mutex); - - queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, - msecs_to_jiffies(wusbhc->trust_timeout / 2)); -} - -/* - * Find the wusb_dev from its device address. - * - * The device can be found directly from the address (see - * wusb_cack_add() for where the device address is set to port_idx - * +2), except when the address is zero. - */ -static struct wusb_dev *wusbhc_find_dev_by_addr(struct wusbhc *wusbhc, u8 addr) -{ - int p; - - if (addr == 0xff) /* unconnected */ - return NULL; - - if (addr > 0) { - int port = (addr & ~0x80) - 2; - if (port < 0 || port >= wusbhc->ports_max) - return NULL; - return wusb_port_by_idx(wusbhc, port)->wusb_dev; - } - - /* Look for the device with address 0. */ - for (p = 0; p < wusbhc->ports_max; p++) { - struct wusb_dev *wusb_dev = wusb_port_by_idx(wusbhc, p)->wusb_dev; - if (wusb_dev && wusb_dev->addr == addr) - return wusb_dev; - } - return NULL; -} - -/* - * Handle a DN_Alive notification (WUSB1.0[7.6.1]) - * - * This just updates the device activity timestamp and then refreshes - * the keep alive IE. - * - * @wusbhc shall be referenced and unlocked - */ -static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, u8 srcaddr) -{ - struct wusb_dev *wusb_dev; - - mutex_lock(&wusbhc->mutex); - wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr); - if (wusb_dev == NULL) { - dev_dbg(wusbhc->dev, "ignoring DN_Alive from unconnected device %02x\n", - srcaddr); - } else { - wusb_dev->entry_ts = jiffies; - __wusbhc_keep_alive(wusbhc); - } - mutex_unlock(&wusbhc->mutex); -} - -/* - * Handle a DN_Connect notification (WUSB1.0[7.6.1]) - * - * @wusbhc - * @pkt_hdr - * @size: Size of the buffer where the notification resides; if the - * notification data suggests there should be more data than - * available, an error will be signaled and the whole buffer - * consumed. - * - * @wusbhc->mutex shall be held - */ -static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc, - struct wusb_dn_hdr *dn_hdr, - size_t size) -{ - struct device *dev = wusbhc->dev; - struct wusb_dn_connect *dnc; - char pr_cdid[WUSB_CKHDID_STRSIZE]; - static const char *beacon_behaviour[] = { - "reserved", - "self-beacon", - "directed-beacon", - "no-beacon" - }; - - if (size < sizeof(*dnc)) { - dev_err(dev, "DN CONNECT: short notification (%zu < %zu)\n", - size, sizeof(*dnc)); - return; - } - - dnc = container_of(dn_hdr, struct wusb_dn_connect, hdr); - sprintf(pr_cdid, "%16ph", dnc->CDID.data); - dev_info(dev, "DN CONNECT: device %s @ %x (%s) wants to %s\n", - pr_cdid, - wusb_dn_connect_prev_dev_addr(dnc), - beacon_behaviour[wusb_dn_connect_beacon_behavior(dnc)], - wusb_dn_connect_new_connection(dnc) ? "connect" : "reconnect"); - /* ACK the connect */ - wusbhc_devconnect_ack(wusbhc, dnc, pr_cdid); -} - -/* - * Handle a DN_Disconnect notification (WUSB1.0[7.6.1]) - * - * Device is going down -- do the disconnect. - * - * @wusbhc shall be referenced and unlocked - */ -static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, u8 srcaddr) -{ - struct device *dev = wusbhc->dev; - struct wusb_dev *wusb_dev; - - mutex_lock(&wusbhc->mutex); - wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr); - if (wusb_dev == NULL) { - dev_dbg(dev, "ignoring DN DISCONNECT from unconnected device %02x\n", - srcaddr); - } else { - dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n", - wusb_dev->addr); - __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, - wusb_dev->port_idx)); - } - mutex_unlock(&wusbhc->mutex); -} - -/* - * Handle a Device Notification coming a host - * - * The Device Notification comes from a host (HWA, DWA or WHCI) - * wrapped in a set of headers. Somebody else has peeled off those - * headers for us and we just get one Device Notifications. - * - * Invalid DNs (e.g., too short) are discarded. - * - * @wusbhc shall be referenced - * - * FIXMES: - * - implement priorities as in WUSB1.0[Table 7-55]? - */ -void wusbhc_handle_dn(struct wusbhc *wusbhc, u8 srcaddr, - struct wusb_dn_hdr *dn_hdr, size_t size) -{ - struct device *dev = wusbhc->dev; - - if (size < sizeof(struct wusb_dn_hdr)) { - dev_err(dev, "DN data shorter than DN header (%d < %d)\n", - (int)size, (int)sizeof(struct wusb_dn_hdr)); - return; - } - switch (dn_hdr->bType) { - case WUSB_DN_CONNECT: - wusbhc_handle_dn_connect(wusbhc, dn_hdr, size); - break; - case WUSB_DN_ALIVE: - wusbhc_handle_dn_alive(wusbhc, srcaddr); - break; - case WUSB_DN_DISCONNECT: - wusbhc_handle_dn_disconnect(wusbhc, srcaddr); - break; - case WUSB_DN_MASAVAILCHANGED: - case WUSB_DN_RWAKE: - case WUSB_DN_SLEEP: - /* FIXME: handle these DNs. */ - break; - case WUSB_DN_EPRDY: - /* The hardware handles these. */ - break; - default: - dev_warn(dev, "unknown DN %u (%d octets) from %u\n", - dn_hdr->bType, (int)size, srcaddr); - } -} -EXPORT_SYMBOL_GPL(wusbhc_handle_dn); - -/* - * Disconnect a WUSB device from a the cluster - * - * @wusbhc - * @port Fake port where the device is (wusbhc index, not USB port number). - * - * In Wireless USB, a disconnect is basically telling the device he is - * being disconnected and forgetting about him. - * - * We send the device a Device Disconnect IE (WUSB1.0[7.5.11]) for 100 - * ms and then keep going. - * - * We don't do much in case of error; we always pretend we disabled - * the port and disconnected the device. If physically the request - * didn't get there (many things can fail in the way there), the stack - * will reject the device's communication attempts. - * - * @wusbhc should be refcounted and locked - */ -void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port_idx) -{ - int result; - struct device *dev = wusbhc->dev; - struct wusb_dev *wusb_dev; - struct wuie_disconnect *ie; - - wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev; - if (wusb_dev == NULL) { - /* reset no device? ignore */ - dev_dbg(dev, "DISCONNECT: no device at port %u, ignoring\n", - port_idx); - return; - } - __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx)); - - ie = kzalloc(sizeof(*ie), GFP_KERNEL); - if (ie == NULL) - return; - ie->hdr.bLength = sizeof(*ie); - ie->hdr.bIEIdentifier = WUIE_ID_DEVICE_DISCONNECT; - ie->bDeviceAddress = wusb_dev->addr; - result = wusbhc_mmcie_set(wusbhc, 0, 0, &ie->hdr); - if (result < 0) - dev_err(dev, "DISCONNECT: can't set MMC: %d\n", result); - else { - /* At least 6 MMCs, assuming at least 1 MMC per zone. */ - msleep(7*4); - wusbhc_mmcie_rm(wusbhc, &ie->hdr); - } - kfree(ie); -} - -/* - * Walk over the BOS descriptor, verify and grok it - * - * @usb_dev: referenced - * @wusb_dev: referenced and unlocked - * - * The BOS descriptor is defined at WUSB1.0[7.4.1], and it defines a - * "flexible" way to wrap all kinds of descriptors inside an standard - * descriptor (wonder why they didn't use normal descriptors, - * btw). Not like they lack code. - * - * At the end we go to look for the WUSB Device Capabilities - * (WUSB1.0[7.4.1.1]) that is wrapped in a device capability descriptor - * that is part of the BOS descriptor set. That tells us what does the - * device support (dual role, beacon type, UWB PHY rates). - */ -static int wusb_dev_bos_grok(struct usb_device *usb_dev, - struct wusb_dev *wusb_dev, - struct usb_bos_descriptor *bos, size_t desc_size) -{ - ssize_t result; - struct device *dev = &usb_dev->dev; - void *itr, *top; - - /* Walk over BOS capabilities, verify them */ - itr = (void *)bos + sizeof(*bos); - top = itr + desc_size - sizeof(*bos); - while (itr < top) { - struct usb_dev_cap_header *cap_hdr = itr; - size_t cap_size; - u8 cap_type; - if (top - itr < sizeof(*cap_hdr)) { - dev_err(dev, "Device BUG? premature end of BOS header " - "data [offset 0x%02x]: only %zu bytes left\n", - (int)(itr - (void *)bos), top - itr); - result = -ENOSPC; - goto error_bad_cap; - } - cap_size = cap_hdr->bLength; - cap_type = cap_hdr->bDevCapabilityType; - if (cap_size == 0) - break; - if (cap_size > top - itr) { - dev_err(dev, "Device BUG? premature end of BOS data " - "[offset 0x%02x cap %02x %zu bytes]: " - "only %zu bytes left\n", - (int)(itr - (void *)bos), - cap_type, cap_size, top - itr); - result = -EBADF; - goto error_bad_cap; - } - switch (cap_type) { - case USB_CAP_TYPE_WIRELESS_USB: - if (cap_size != sizeof(*wusb_dev->wusb_cap_descr)) - dev_err(dev, "Device BUG? WUSB Capability " - "descriptor is %zu bytes vs %zu " - "needed\n", cap_size, - sizeof(*wusb_dev->wusb_cap_descr)); - else - wusb_dev->wusb_cap_descr = itr; - break; - default: - dev_err(dev, "BUG? Unknown BOS capability 0x%02x " - "(%zu bytes) at offset 0x%02x\n", cap_type, - cap_size, (int)(itr - (void *)bos)); - } - itr += cap_size; - } - result = 0; -error_bad_cap: - return result; -} - -/* - * Add information from the BOS descriptors to the device - * - * @usb_dev: referenced - * @wusb_dev: referenced and unlocked - * - * So what we do is we alloc a space for the BOS descriptor of 64 - * bytes; read the first four bytes which include the wTotalLength - * field (WUSB1.0[T7-26]) and if it fits in those 64 bytes, read the - * whole thing. If not we realloc to that size. - * - * Then we call the groking function, that will fill up - * wusb_dev->wusb_cap_descr, which is what we'll need later on. - */ -static int wusb_dev_bos_add(struct usb_device *usb_dev, - struct wusb_dev *wusb_dev) -{ - ssize_t result; - struct device *dev = &usb_dev->dev; - struct usb_bos_descriptor *bos; - size_t alloc_size = 32, desc_size = 4; - - bos = kmalloc(alloc_size, GFP_KERNEL); - if (bos == NULL) - return -ENOMEM; - result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size); - if (result < 4) { - dev_err(dev, "Can't get BOS descriptor or too short: %zd\n", - result); - goto error_get_descriptor; - } - desc_size = le16_to_cpu(bos->wTotalLength); - if (desc_size >= alloc_size) { - kfree(bos); - alloc_size = desc_size; - bos = kmalloc(alloc_size, GFP_KERNEL); - if (bos == NULL) - return -ENOMEM; - } - result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size); - if (result < 0 || result != desc_size) { - dev_err(dev, "Can't get BOS descriptor or too short (need " - "%zu bytes): %zd\n", desc_size, result); - goto error_get_descriptor; - } - if (result < sizeof(*bos) - || le16_to_cpu(bos->wTotalLength) != desc_size) { - dev_err(dev, "Can't get BOS descriptor or too short (need " - "%zu bytes): %zd\n", desc_size, result); - goto error_get_descriptor; - } - - result = wusb_dev_bos_grok(usb_dev, wusb_dev, bos, result); - if (result < 0) - goto error_bad_bos; - wusb_dev->bos = bos; - return 0; - -error_bad_bos: -error_get_descriptor: - kfree(bos); - wusb_dev->wusb_cap_descr = NULL; - return result; -} - -static void wusb_dev_bos_rm(struct wusb_dev *wusb_dev) -{ - kfree(wusb_dev->bos); - wusb_dev->wusb_cap_descr = NULL; -}; - -/* - * USB stack's device addition Notifier Callback - * - * Called from drivers/usb/core/hub.c when a new device is added; we - * use this hook to perform certain WUSB specific setup work on the - * new device. As well, it is the first time we can connect the - * wusb_dev and the usb_dev. So we note it down in wusb_dev and take a - * reference that we'll drop. - * - * First we need to determine if the device is a WUSB device (else we - * ignore it). For that we use the speed setting (USB_SPEED_WIRELESS) - * [FIXME: maybe we'd need something more definitive]. If so, we track - * it's usb_busd and from there, the WUSB HC. - * - * Because all WUSB HCs are contained in a 'struct wusbhc', voila, we - * get the wusbhc for the device. - * - * We have a reference on @usb_dev (as we are called at the end of its - * enumeration). - * - * NOTE: @usb_dev locked - */ -static void wusb_dev_add_ncb(struct usb_device *usb_dev) -{ - int result = 0; - struct wusb_dev *wusb_dev; - struct wusbhc *wusbhc; - struct device *dev = &usb_dev->dev; - u8 port_idx; - - if (usb_dev->wusb == 0 || usb_dev->devnum == 1) - return; /* skip non wusb and wusb RHs */ - - usb_set_device_state(usb_dev, USB_STATE_UNAUTHENTICATED); - - wusbhc = wusbhc_get_by_usb_dev(usb_dev); - if (wusbhc == NULL) - goto error_nodev; - mutex_lock(&wusbhc->mutex); - wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev); - port_idx = wusb_port_no_to_idx(usb_dev->portnum); - mutex_unlock(&wusbhc->mutex); - if (wusb_dev == NULL) - goto error_nodev; - wusb_dev->usb_dev = usb_get_dev(usb_dev); - usb_dev->wusb_dev = wusb_dev_get(wusb_dev); - result = wusb_dev_sec_add(wusbhc, usb_dev, wusb_dev); - if (result < 0) { - dev_err(dev, "Cannot enable security: %d\n", result); - goto error_sec_add; - } - /* Now query the device for it's BOS and attach it to wusb_dev */ - result = wusb_dev_bos_add(usb_dev, wusb_dev); - if (result < 0) { - dev_err(dev, "Cannot get BOS descriptors: %d\n", result); - goto error_bos_add; - } - result = wusb_dev_sysfs_add(wusbhc, usb_dev, wusb_dev); - if (result < 0) - goto error_add_sysfs; -out: - wusb_dev_put(wusb_dev); - wusbhc_put(wusbhc); -error_nodev: - return; - -error_add_sysfs: - wusb_dev_bos_rm(wusb_dev); -error_bos_add: - wusb_dev_sec_rm(wusb_dev); -error_sec_add: - mutex_lock(&wusbhc->mutex); - __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx)); - mutex_unlock(&wusbhc->mutex); - goto out; -} - -/* - * Undo all the steps done at connection by the notifier callback - * - * NOTE: @usb_dev locked - */ -static void wusb_dev_rm_ncb(struct usb_device *usb_dev) -{ - struct wusb_dev *wusb_dev = usb_dev->wusb_dev; - - if (usb_dev->wusb == 0 || usb_dev->devnum == 1) - return; /* skip non wusb and wusb RHs */ - - wusb_dev_sysfs_rm(wusb_dev); - wusb_dev_bos_rm(wusb_dev); - wusb_dev_sec_rm(wusb_dev); - wusb_dev->usb_dev = NULL; - usb_dev->wusb_dev = NULL; - wusb_dev_put(wusb_dev); - usb_put_dev(usb_dev); -} - -/* - * Handle notifications from the USB stack (notifier call back) - * - * This is called when the USB stack does a - * usb_{bus,device}_{add,remove}() so we can do WUSB specific - * handling. It is called with [for the case of - * USB_DEVICE_{ADD,REMOVE} with the usb_dev locked. - */ -int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, - void *priv) -{ - int result = NOTIFY_OK; - - switch (val) { - case USB_DEVICE_ADD: - wusb_dev_add_ncb(priv); - break; - case USB_DEVICE_REMOVE: - wusb_dev_rm_ncb(priv); - break; - case USB_BUS_ADD: - /* ignore (for now) */ - case USB_BUS_REMOVE: - break; - default: - WARN_ON(1); - result = NOTIFY_BAD; - } - return result; -} - -/* - * Return a referenced wusb_dev given a @wusbhc and @usb_dev - */ -struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *wusbhc, - struct usb_device *usb_dev) -{ - struct wusb_dev *wusb_dev; - u8 port_idx; - - port_idx = wusb_port_no_to_idx(usb_dev->portnum); - BUG_ON(port_idx > wusbhc->ports_max); - wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev; - if (wusb_dev != NULL) /* ops, device is gone */ - wusb_dev_get(wusb_dev); - return wusb_dev; -} -EXPORT_SYMBOL_GPL(__wusb_dev_get_by_usb_dev); - -void wusb_dev_destroy(struct kref *_wusb_dev) -{ - struct wusb_dev *wusb_dev = container_of(_wusb_dev, struct wusb_dev, refcnt); - - list_del_init(&wusb_dev->cack_node); - wusb_dev_free(wusb_dev); -} -EXPORT_SYMBOL_GPL(wusb_dev_destroy); - -/* - * Create all the device connect handling infrastructure - * - * This is basically the device info array, Connect Acknowledgement - * (cack) lists, keep-alive timers (and delayed work thread). - */ -int wusbhc_devconnect_create(struct wusbhc *wusbhc) -{ - wusbhc->keep_alive_ie.hdr.bIEIdentifier = WUIE_ID_KEEP_ALIVE; - wusbhc->keep_alive_ie.hdr.bLength = sizeof(wusbhc->keep_alive_ie.hdr); - INIT_DELAYED_WORK(&wusbhc->keep_alive_timer, wusbhc_keep_alive_run); - - wusbhc->cack_ie.hdr.bIEIdentifier = WUIE_ID_CONNECTACK; - wusbhc->cack_ie.hdr.bLength = sizeof(wusbhc->cack_ie.hdr); - INIT_LIST_HEAD(&wusbhc->cack_list); - - return 0; -} - -/* - * Release all resources taken by the devconnect stuff - */ -void wusbhc_devconnect_destroy(struct wusbhc *wusbhc) -{ - /* no op */ -} - -/* - * wusbhc_devconnect_start - start accepting device connections - * @wusbhc: the WUSB HC - * - * Sets the Host Info IE to accept all new connections. - * - * FIXME: This also enables the keep alives but this is not necessary - * until there are connected and authenticated devices. - */ -int wusbhc_devconnect_start(struct wusbhc *wusbhc) -{ - struct device *dev = wusbhc->dev; - struct wuie_host_info *hi; - int result; - - hi = kzalloc(sizeof(*hi), GFP_KERNEL); - if (hi == NULL) - return -ENOMEM; - - hi->hdr.bLength = sizeof(*hi); - hi->hdr.bIEIdentifier = WUIE_ID_HOST_INFO; - hi->attributes = cpu_to_le16((wusbhc->rsv->stream << 3) | WUIE_HI_CAP_ALL); - hi->CHID = wusbhc->chid; - result = wusbhc_mmcie_set(wusbhc, 0, 0, &hi->hdr); - if (result < 0) { - dev_err(dev, "Cannot add Host Info MMCIE: %d\n", result); - goto error_mmcie_set; - } - wusbhc->wuie_host_info = hi; - - queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, - msecs_to_jiffies(wusbhc->trust_timeout / 2)); - - return 0; - -error_mmcie_set: - kfree(hi); - return result; -} - -/* - * wusbhc_devconnect_stop - stop managing connected devices - * @wusbhc: the WUSB HC - * - * Disconnects any devices still connected, stops the keep alives and - * removes the Host Info IE. - */ -void wusbhc_devconnect_stop(struct wusbhc *wusbhc) -{ - int i; - - mutex_lock(&wusbhc->mutex); - for (i = 0; i < wusbhc->ports_max; i++) { - if (wusbhc->port[i].wusb_dev) - __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]); - } - mutex_unlock(&wusbhc->mutex); - - cancel_delayed_work_sync(&wusbhc->keep_alive_timer); - wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr); - kfree(wusbhc->wuie_host_info); - wusbhc->wuie_host_info = NULL; -} - -/* - * wusb_set_dev_addr - set the WUSB device address used by the host - * @wusbhc: the WUSB HC the device is connect to - * @wusb_dev: the WUSB device - * @addr: new device address - */ -int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, u8 addr) -{ - int result; - - wusb_dev->addr = addr; - result = wusbhc->dev_info_set(wusbhc, wusb_dev); - if (result < 0) - dev_err(wusbhc->dev, "device %d: failed to set device " - "address\n", wusb_dev->port_idx); - else - dev_info(wusbhc->dev, "device %d: %s addr %u\n", - wusb_dev->port_idx, - (addr & WUSB_DEV_ADDR_UNAUTH) ? "unauth" : "auth", - wusb_dev->addr); - - return result; -} diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c deleted file mode 100644 index acce0d551eb2..000000000000 --- a/drivers/usb/wusbcore/mmc.c +++ /dev/null @@ -1,303 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) - * MMC (Microscheduled Management Command) handling - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * WUIEs and MMC IEs...well, they are almost the same at the end. MMC - * IEs are Wireless USB IEs that go into the MMC period...[what is - * that? look in Design-overview.txt]. - * - * - * This is a simple subsystem to keep track of which IEs are being - * sent by the host in the MMC period. - * - * For each WUIE we ask to send, we keep it in an array, so we can - * request its removal later, or replace the content. They are tracked - * by pointer, so be sure to use the same pointer if you want to - * remove it or update the contents. - * - * FIXME: - * - add timers that autoremove intervalled IEs? - */ -#include <linux/usb/wusb.h> -#include <linux/slab.h> -#include <linux/export.h> -#include "wusbhc.h" - -/* Initialize the MMCIEs handling mechanism */ -int wusbhc_mmcie_create(struct wusbhc *wusbhc) -{ - u8 mmcies = wusbhc->mmcies_max; - wusbhc->mmcie = kcalloc(mmcies, sizeof(wusbhc->mmcie[0]), GFP_KERNEL); - if (wusbhc->mmcie == NULL) - return -ENOMEM; - mutex_init(&wusbhc->mmcie_mutex); - return 0; -} - -/* Release resources used by the MMCIEs handling mechanism */ -void wusbhc_mmcie_destroy(struct wusbhc *wusbhc) -{ - kfree(wusbhc->mmcie); -} - -/* - * Add or replace an MMC Wireless USB IE. - * - * @interval: See WUSB1.0[8.5.3.1] - * @repeat_cnt: See WUSB1.0[8.5.3.1] - * @handle: See WUSB1.0[8.5.3.1] - * @wuie: Pointer to the header of the WUSB IE data to add. - * MUST BE allocated in a kmalloc buffer (no stack or - * vmalloc). - * THE CALLER ALWAYS OWNS THE POINTER (we don't free it - * on remove, we just forget about it). - * @returns: 0 if ok, < 0 errno code on error. - * - * Goes over the *whole* @wusbhc->mmcie array looking for (a) the - * first free spot and (b) if @wuie is already in the array (aka: - * transmitted in the MMCs) the spot were it is. - * - * If present, we "overwrite it" (update). - * - * - * NOTE: Need special ordering rules -- see below WUSB1.0 Table 7-38. - * The host uses the handle as the 'sort' index. We - * allocate the last one always for the WUIE_ID_HOST_INFO, and - * the rest, first come first serve in inverse order. - * - * Host software must make sure that it adds the other IEs in - * the right order... the host hardware is responsible for - * placing the WCTA IEs in the right place with the other IEs - * set by host software. - * - * NOTE: we can access wusbhc->wa_descr without locking because it is - * read only. - */ -int wusbhc_mmcie_set(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - struct wuie_hdr *wuie) -{ - int result = -ENOBUFS; - unsigned handle, itr; - - /* Search a handle, taking into account the ordering */ - mutex_lock(&wusbhc->mmcie_mutex); - switch (wuie->bIEIdentifier) { - case WUIE_ID_HOST_INFO: - /* Always last */ - handle = wusbhc->mmcies_max - 1; - break; - case WUIE_ID_ISOCH_DISCARD: - dev_err(wusbhc->dev, "Special ordering case for WUIE ID 0x%x " - "unimplemented\n", wuie->bIEIdentifier); - result = -ENOSYS; - goto error_unlock; - default: - /* search for it or find the last empty slot */ - handle = ~0; - for (itr = 0; itr < wusbhc->mmcies_max - 1; itr++) { - if (wusbhc->mmcie[itr] == wuie) { - handle = itr; - break; - } - if (wusbhc->mmcie[itr] == NULL) - handle = itr; - } - if (handle == ~0) - goto error_unlock; - } - result = (wusbhc->mmcie_add)(wusbhc, interval, repeat_cnt, handle, - wuie); - if (result >= 0) - wusbhc->mmcie[handle] = wuie; -error_unlock: - mutex_unlock(&wusbhc->mmcie_mutex); - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_mmcie_set); - -/* - * Remove an MMC IE previously added with wusbhc_mmcie_set() - * - * @wuie Pointer used to add the WUIE - */ -void wusbhc_mmcie_rm(struct wusbhc *wusbhc, struct wuie_hdr *wuie) -{ - int result; - unsigned handle, itr; - - mutex_lock(&wusbhc->mmcie_mutex); - for (itr = 0; itr < wusbhc->mmcies_max; itr++) { - if (wusbhc->mmcie[itr] == wuie) { - handle = itr; - goto found; - } - } - mutex_unlock(&wusbhc->mmcie_mutex); - return; - -found: - result = (wusbhc->mmcie_rm)(wusbhc, handle); - if (result == 0) - wusbhc->mmcie[itr] = NULL; - mutex_unlock(&wusbhc->mmcie_mutex); -} -EXPORT_SYMBOL_GPL(wusbhc_mmcie_rm); - -static int wusbhc_mmc_start(struct wusbhc *wusbhc) -{ - int ret; - - mutex_lock(&wusbhc->mutex); - ret = wusbhc->start(wusbhc); - if (ret >= 0) - wusbhc->active = 1; - mutex_unlock(&wusbhc->mutex); - - return ret; -} - -static void wusbhc_mmc_stop(struct wusbhc *wusbhc) -{ - mutex_lock(&wusbhc->mutex); - wusbhc->active = 0; - wusbhc->stop(wusbhc, WUSB_CHANNEL_STOP_DELAY_MS); - mutex_unlock(&wusbhc->mutex); -} - -/* - * wusbhc_start - start transmitting MMCs and accepting connections - * @wusbhc: the HC to start - * - * Establishes a cluster reservation, enables device connections, and - * starts MMCs with appropriate DNTS parameters. - */ -int wusbhc_start(struct wusbhc *wusbhc) -{ - int result; - struct device *dev = wusbhc->dev; - - WARN_ON(wusbhc->wuie_host_info != NULL); - BUG_ON(wusbhc->uwb_rc == NULL); - - result = wusbhc_rsv_establish(wusbhc); - if (result < 0) { - dev_err(dev, "cannot establish cluster reservation: %d\n", - result); - goto error_rsv_establish; - } - - result = wusbhc_devconnect_start(wusbhc); - if (result < 0) { - dev_err(dev, "error enabling device connections: %d\n", - result); - goto error_devconnect_start; - } - - result = wusbhc_sec_start(wusbhc); - if (result < 0) { - dev_err(dev, "error starting security in the HC: %d\n", - result); - goto error_sec_start; - } - - result = wusbhc->set_num_dnts(wusbhc, wusbhc->dnts_interval, - wusbhc->dnts_num_slots); - if (result < 0) { - dev_err(dev, "Cannot set DNTS parameters: %d\n", result); - goto error_set_num_dnts; - } - result = wusbhc_mmc_start(wusbhc); - if (result < 0) { - dev_err(dev, "error starting wusbch: %d\n", result); - goto error_wusbhc_start; - } - - return 0; - -error_wusbhc_start: - wusbhc_sec_stop(wusbhc); -error_set_num_dnts: -error_sec_start: - wusbhc_devconnect_stop(wusbhc); -error_devconnect_start: - wusbhc_rsv_terminate(wusbhc); -error_rsv_establish: - return result; -} - -/* - * wusbhc_stop - stop transmitting MMCs - * @wusbhc: the HC to stop - * - * Stops the WUSB channel and removes the cluster reservation. - */ -void wusbhc_stop(struct wusbhc *wusbhc) -{ - wusbhc_mmc_stop(wusbhc); - wusbhc_sec_stop(wusbhc); - wusbhc_devconnect_stop(wusbhc); - wusbhc_rsv_terminate(wusbhc); -} - -/* - * Set/reset/update a new CHID - * - * Depending on the previous state of the MMCs, start, stop or change - * the sent MMC. This effectively switches the host controller on and - * off (radio wise). - */ -int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) -{ - int result = 0; - - if (memcmp(chid, &wusb_ckhdid_zero, sizeof(*chid)) == 0) - chid = NULL; - - mutex_lock(&wusbhc->mutex); - if (chid) { - if (wusbhc->active) { - mutex_unlock(&wusbhc->mutex); - return -EBUSY; - } - wusbhc->chid = *chid; - } - - /* register with UWB if we haven't already since we are about to start - the radio. */ - if ((chid) && (wusbhc->uwb_rc == NULL)) { - wusbhc->uwb_rc = uwb_rc_get_by_grandpa(wusbhc->dev->parent); - if (wusbhc->uwb_rc == NULL) { - result = -ENODEV; - dev_err(wusbhc->dev, - "Cannot get associated UWB Host Controller\n"); - goto error_rc_get; - } - - result = wusbhc_pal_register(wusbhc); - if (result < 0) { - dev_err(wusbhc->dev, "Cannot register as a UWB PAL\n"); - goto error_pal_register; - } - } - mutex_unlock(&wusbhc->mutex); - - if (chid) - result = uwb_radio_start(&wusbhc->pal); - else if (wusbhc->uwb_rc) - uwb_radio_stop(&wusbhc->pal); - - return result; - -error_pal_register: - uwb_rc_put(wusbhc->uwb_rc); - wusbhc->uwb_rc = NULL; -error_rc_get: - mutex_unlock(&wusbhc->mutex); - - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_chid_set); diff --git a/drivers/usb/wusbcore/pal.c b/drivers/usb/wusbcore/pal.c deleted file mode 100644 index 30f569131471..000000000000 --- a/drivers/usb/wusbcore/pal.c +++ /dev/null @@ -1,45 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * UWB Protocol Adaptation Layer (PAL) glue. - * - * Copyright (C) 2008 Cambridge Silicon Radio Ltd. - */ -#include "wusbhc.h" - -static void wusbhc_channel_changed(struct uwb_pal *pal, int channel) -{ - struct wusbhc *wusbhc = container_of(pal, struct wusbhc, pal); - - dev_dbg(wusbhc->dev, "%s: channel = %d\n", __func__, channel); - if (channel < 0) - wusbhc_stop(wusbhc); - else - wusbhc_start(wusbhc); -} - -/** - * wusbhc_pal_register - register the WUSB HC as a UWB PAL - * @wusbhc: the WUSB HC - */ -int wusbhc_pal_register(struct wusbhc *wusbhc) -{ - uwb_pal_init(&wusbhc->pal); - - wusbhc->pal.name = "wusbhc"; - wusbhc->pal.device = wusbhc->usb_hcd.self.controller; - wusbhc->pal.rc = wusbhc->uwb_rc; - wusbhc->pal.channel_changed = wusbhc_channel_changed; - - return uwb_pal_register(&wusbhc->pal); -} - -/** - * wusbhc_pal_unregister - unregister the WUSB HC as a UWB PAL - * @wusbhc: the WUSB HC - */ -void wusbhc_pal_unregister(struct wusbhc *wusbhc) -{ - if (wusbhc->uwb_rc) - uwb_pal_unregister(&wusbhc->pal); -} diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c deleted file mode 100644 index 6dcfc6825f55..000000000000 --- a/drivers/usb/wusbcore/reservation.c +++ /dev/null @@ -1,110 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB cluster reservation management - * - * Copyright (C) 2007 Cambridge Silicon Radio Ltd. - */ -#include <linux/kernel.h> -#include <linux/uwb.h> - -#include "wusbhc.h" - -/* - * WUSB cluster reservations are multicast reservations with the - * broadcast cluster ID (BCID) as the target DevAddr. - * - * FIXME: consider adjusting the reservation depending on what devices - * are attached. - */ - -static int wusbhc_bwa_set(struct wusbhc *wusbhc, u8 stream, - const struct uwb_mas_bm *mas) -{ - if (mas == NULL) - mas = &uwb_mas_bm_zero; - return wusbhc->bwa_set(wusbhc, stream, mas); -} - -/** - * wusbhc_rsv_complete_cb - WUSB HC reservation complete callback - * @rsv: the reservation - * - * Either set or clear the HC's view of the reservation. - * - * FIXME: when a reservation is denied the HC should be stopped. - */ -static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv) -{ - struct wusbhc *wusbhc = rsv->pal_priv; - struct device *dev = wusbhc->dev; - struct uwb_mas_bm mas; - - dev_dbg(dev, "%s: state = %d\n", __func__, rsv->state); - switch (rsv->state) { - case UWB_RSV_STATE_O_ESTABLISHED: - uwb_rsv_get_usable_mas(rsv, &mas); - dev_dbg(dev, "established reservation: %*pb\n", - UWB_NUM_MAS, mas.bm); - wusbhc_bwa_set(wusbhc, rsv->stream, &mas); - break; - case UWB_RSV_STATE_NONE: - dev_dbg(dev, "removed reservation\n"); - wusbhc_bwa_set(wusbhc, 0, NULL); - break; - default: - dev_dbg(dev, "unexpected reservation state: %d\n", rsv->state); - break; - } -} - - -/** - * wusbhc_rsv_establish - establish a reservation for the cluster - * @wusbhc: the WUSB HC requesting a bandwidth reservation - */ -int wusbhc_rsv_establish(struct wusbhc *wusbhc) -{ - struct uwb_rc *rc = wusbhc->uwb_rc; - struct uwb_rsv *rsv; - struct uwb_dev_addr bcid; - int ret; - - if (rc == NULL) - return -ENODEV; - - rsv = uwb_rsv_create(rc, wusbhc_rsv_complete_cb, wusbhc); - if (rsv == NULL) - return -ENOMEM; - - bcid.data[0] = wusbhc->cluster_id; - bcid.data[1] = 0; - - rsv->target.type = UWB_RSV_TARGET_DEVADDR; - rsv->target.devaddr = bcid; - rsv->type = UWB_DRP_TYPE_PRIVATE; - rsv->max_mas = 256; /* try to get as much as possible */ - rsv->min_mas = 15; /* one MAS per zone */ - rsv->max_interval = 1; /* max latency is one zone */ - rsv->is_multicast = true; - - ret = uwb_rsv_establish(rsv); - if (ret == 0) - wusbhc->rsv = rsv; - else - uwb_rsv_destroy(rsv); - return ret; -} - - -/** - * wusbhc_rsv_terminate - terminate the cluster reservation - * @wusbhc: the WUSB host whose reservation is to be terminated - */ -void wusbhc_rsv_terminate(struct wusbhc *wusbhc) -{ - if (wusbhc->rsv) { - uwb_rsv_terminate(wusbhc->rsv); - uwb_rsv_destroy(wusbhc->rsv); - wusbhc->rsv = NULL; - } -} diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c deleted file mode 100644 index 20c08cd9dcbf..000000000000 --- a/drivers/usb/wusbcore/rh.c +++ /dev/null @@ -1,426 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * Root Hub operations - * - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * We fake a root hub that has fake ports (as many as simultaneous - * devices the Wireless USB Host Controller can deal with). For each - * port we keep an state in @wusbhc->port[index] identical to the one - * specified in the USB2.0[ch11] spec and some extra device - * information that complements the one in 'struct usb_device' (as - * this lacs a hcpriv pointer). - * - * Note this is common to WHCI and HWA host controllers. - * - * Through here we enable most of the state changes that the USB stack - * will use to connect or disconnect devices. We need to do some - * forced adaptation of Wireless USB device states vs. wired: - * - * USB: WUSB: - * - * Port Powered-off port slot n/a - * Powered-on port slot available - * Disconnected port slot available - * Connected port slot assigned device - * device sent DN_Connect - * device was authenticated - * Enabled device is authenticated, transitioned - * from unauth -> auth -> default address - * -> enabled - * Reset disconnect - * Disable disconnect - * - * This maps the standard USB port states with the WUSB device states - * so we can fake ports without having to modify the USB stack. - * - * FIXME: this process will change in the future - * - * - * ENTRY POINTS - * - * Our entry points into here are, as in hcd.c, the USB stack root hub - * ops defined in the usb_hcd struct: - * - * wusbhc_rh_status_data() Provide hub and port status data bitmap - * - * wusbhc_rh_control() Execution of all the major requests - * you can do to a hub (Set|Clear - * features, get descriptors, status, etc). - * - * wusbhc_rh_[suspend|resume]() That - * - * wusbhc_rh_start_port_reset() ??? unimplemented - */ -#include <linux/slab.h> -#include <linux/export.h> -#include "wusbhc.h" - -/* - * Reset a fake port - * - * Using a Reset Device IE is too heavyweight as it causes the device - * to enter the UnConnected state and leave the cluster, this can mean - * that when the device reconnects it is connected to a different fake - * port. - * - * Instead, reset authenticated devices with a SetAddress(0), followed - * by a SetAddresss(AuthAddr). - * - * For unauthenticated devices just pretend to reset but do nothing. - * If the device initialization continues to fail it will eventually - * time out after TrustTimeout and enter the UnConnected state. - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * Supposedly we are the only thread accesing @wusbhc->port; in any - * case, maybe we should move the mutex locking from - * wusbhc_devconnect_auth() to here. - * - * @port_idx refers to the wusbhc's port index, not the USB port number - */ -static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) -{ - int result = 0; - struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); - struct wusb_dev *wusb_dev = port->wusb_dev; - - if (wusb_dev == NULL) - return -ENOTCONN; - - port->status |= USB_PORT_STAT_RESET; - port->change |= USB_PORT_STAT_C_RESET; - - if (wusb_dev->addr & WUSB_DEV_ADDR_UNAUTH) - result = 0; - else - result = wusb_dev_update_address(wusbhc, wusb_dev); - - port->status &= ~USB_PORT_STAT_RESET; - port->status |= USB_PORT_STAT_ENABLE; - port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE; - - return result; -} - -/* - * Return the hub change status bitmap - * - * The bits in the change status bitmap are cleared when a - * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4]. - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * WARNING!! This gets called from atomic context; we cannot get the - * mutex--the only race condition we can find is some bit - * changing just after we copy it, which shouldn't be too - * big of a problem [and we can't make it an spinlock - * because other parts need to take it and sleep] . - * - * @usb_hcd is refcounted, so it won't disappear under us - * and before killing a host, the polling of the root hub - * would be stopped anyway. - */ -int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - size_t cnt, size, bits_set = 0; - - /* WE DON'T LOCK, see comment */ - /* round up to bytes. Hub bit is bit 0 so add 1. */ - size = DIV_ROUND_UP(wusbhc->ports_max + 1, 8); - - /* clear the output buffer. */ - memset(_buf, 0, size); - /* set the bit for each changed port. */ - for (cnt = 0; cnt < wusbhc->ports_max; cnt++) { - - if (wusb_port_by_idx(wusbhc, cnt)->change) { - const int bitpos = cnt+1; - - _buf[bitpos/8] |= (1 << (bitpos % 8)); - bits_set++; - } - } - - return bits_set ? size : 0; -} -EXPORT_SYMBOL_GPL(wusbhc_rh_status_data); - -/* - * Return the hub's descriptor - * - * NOTE: almost cut and paste from ehci-hub.c - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked - */ -static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue, - u16 wIndex, - struct usb_hub_descriptor *descr, - u16 wLength) -{ - u16 temp = 1 + (wusbhc->ports_max / 8); - u8 length = 7 + 2 * temp; - - if (wLength < length) - return -ENOSPC; - descr->bDescLength = 7 + 2 * temp; - descr->bDescriptorType = USB_DT_HUB; /* HUB type */ - descr->bNbrPorts = wusbhc->ports_max; - descr->wHubCharacteristics = cpu_to_le16( - HUB_CHAR_COMMON_LPSM /* All ports power at once */ - | 0x00 /* not part of compound device */ - | HUB_CHAR_NO_OCPM /* No overcurrent protection */ - | 0x00 /* 8 FS think time FIXME ?? */ - | 0x00); /* No port indicators */ - descr->bPwrOn2PwrGood = 0; - descr->bHubContrCurrent = 0; - /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset(&descr->u.hs.DeviceRemovable[0], 0, temp); - memset(&descr->u.hs.DeviceRemovable[temp], 0xff, temp); - return 0; -} - -/* - * Clear a hub feature - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * Nothing to do, so no locking needed ;) - */ -static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature) -{ - int result; - - switch (feature) { - case C_HUB_LOCAL_POWER: - /* FIXME: maybe plug bit 0 to the power input status, - * if any? - * see wusbhc_rh_get_hub_status() */ - case C_HUB_OVER_CURRENT: - result = 0; - break; - default: - result = -EPIPE; - } - return result; -} - -/* - * Return hub status (it is always zero...) - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - * - * Nothing to do, so no locking needed ;) - */ -static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf, - u16 wLength) -{ - /* FIXME: maybe plug bit 0 to the power input status (if any)? */ - *buf = 0; - return 0; -} - -/* - * Set a port feature - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature, - u8 selector, u8 port_idx) -{ - struct device *dev = wusbhc->dev; - - if (port_idx > wusbhc->ports_max) - return -EINVAL; - - switch (feature) { - /* According to USB2.0[11.24.2.13]p2, these features - * are not required to be implemented. */ - case USB_PORT_FEAT_C_OVER_CURRENT: - case USB_PORT_FEAT_C_ENABLE: - case USB_PORT_FEAT_C_SUSPEND: - case USB_PORT_FEAT_C_CONNECTION: - case USB_PORT_FEAT_C_RESET: - return 0; - case USB_PORT_FEAT_POWER: - /* No such thing, but we fake it works */ - mutex_lock(&wusbhc->mutex); - wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER; - mutex_unlock(&wusbhc->mutex); - return 0; - case USB_PORT_FEAT_RESET: - return wusbhc_rh_port_reset(wusbhc, port_idx); - case USB_PORT_FEAT_ENABLE: - case USB_PORT_FEAT_SUSPEND: - dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n", - port_idx, feature, selector); - return -ENOSYS; - default: - dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n", - port_idx, feature, selector); - return -EPIPE; - } - - return 0; -} - -/* - * Clear a port feature... - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature, - u8 selector, u8 port_idx) -{ - int result = 0; - struct device *dev = wusbhc->dev; - - if (port_idx > wusbhc->ports_max) - return -EINVAL; - - mutex_lock(&wusbhc->mutex); - switch (feature) { - case USB_PORT_FEAT_POWER: /* fake port always on */ - /* According to USB2.0[11.24.2.7.1.4], no need to implement? */ - case USB_PORT_FEAT_C_OVER_CURRENT: - break; - case USB_PORT_FEAT_C_RESET: - wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET; - break; - case USB_PORT_FEAT_C_CONNECTION: - wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION; - break; - case USB_PORT_FEAT_ENABLE: - __wusbhc_dev_disable(wusbhc, port_idx); - break; - case USB_PORT_FEAT_C_ENABLE: - wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE; - break; - case USB_PORT_FEAT_SUSPEND: - case USB_PORT_FEAT_C_SUSPEND: - dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n", - port_idx, feature, selector); - result = -ENOSYS; - break; - default: - dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n", - port_idx, feature, selector); - result = -EPIPE; - break; - } - mutex_unlock(&wusbhc->mutex); - - return result; -} - -/* - * Return the port's status - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx, - u32 *_buf, u16 wLength) -{ - __le16 *buf = (__le16 *)_buf; - - if (port_idx > wusbhc->ports_max) - return -EINVAL; - - mutex_lock(&wusbhc->mutex); - buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status); - buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change); - mutex_unlock(&wusbhc->mutex); - - return 0; -} - -/* - * Entry point for Root Hub operations - * - * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. - */ -int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue, - u16 wIndex, char *buf, u16 wLength) -{ - int result = -ENOSYS; - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - - switch (reqntype) { - case GetHubDescriptor: - result = wusbhc_rh_get_hub_descr( - wusbhc, wValue, wIndex, - (struct usb_hub_descriptor *) buf, wLength); - break; - case ClearHubFeature: - result = wusbhc_rh_clear_hub_feat(wusbhc, wValue); - break; - case GetHubStatus: - result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength); - break; - - case SetPortFeature: - result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8, - (wIndex & 0xff) - 1); - break; - case ClearPortFeature: - result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8, - (wIndex & 0xff) - 1); - break; - case GetPortStatus: - result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1, - (u32 *)buf, wLength); - break; - - case SetHubFeature: - default: - dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) " - "UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype, - wValue, wIndex, buf, wLength); - /* dump_stack(); */ - result = -ENOSYS; - } - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_rh_control); - -int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx) -{ - struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); - dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n", - __func__, usb_hcd, wusbhc, port_idx); - WARN_ON(1); - return -ENOSYS; -} -EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset); - -static void wusb_port_init(struct wusb_port *port) -{ - port->status |= USB_PORT_STAT_HIGH_SPEED; -} - -/* - * Alloc fake port specific fields and status. - */ -int wusbhc_rh_create(struct wusbhc *wusbhc) -{ - int result = -ENOMEM; - size_t port_size, itr; - port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]); - wusbhc->port = kzalloc(port_size, GFP_KERNEL); - if (wusbhc->port == NULL) - goto error_port_alloc; - for (itr = 0; itr < wusbhc->ports_max; itr++) - wusb_port_init(&wusbhc->port[itr]); - result = 0; -error_port_alloc: - return result; -} - -void wusbhc_rh_destroy(struct wusbhc *wusbhc) -{ - kfree(wusbhc->port); -} diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c deleted file mode 100644 index 14ac8c98ac9e..000000000000 --- a/drivers/usb/wusbcore/security.c +++ /dev/null @@ -1,599 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * Security support: encryption enablement, etc - * - * Copyright (C) 2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - */ -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/usb/ch9.h> -#include <linux/random.h> -#include <linux/export.h> -#include "wusbhc.h" -#include <asm/unaligned.h> - -static void wusbhc_gtk_rekey_work(struct work_struct *work); - -int wusbhc_sec_create(struct wusbhc *wusbhc) -{ - /* - * WQ is singlethread because we need to serialize rekey operations. - * Use a separate workqueue for security operations instead of the - * wusbd workqueue because security operations may need to communicate - * directly with downstream wireless devices using synchronous URBs. - * If a device is not responding, this could block other host - * controller operations. - */ - wusbhc->wq_security = create_singlethread_workqueue("wusbd_security"); - if (wusbhc->wq_security == NULL) { - pr_err("WUSB-core: Cannot create wusbd_security workqueue\n"); - return -ENOMEM; - } - - wusbhc->gtk.descr.bLength = sizeof(wusbhc->gtk.descr) + - sizeof(wusbhc->gtk.data); - wusbhc->gtk.descr.bDescriptorType = USB_DT_KEY; - wusbhc->gtk.descr.bReserved = 0; - wusbhc->gtk_index = 0; - - INIT_WORK(&wusbhc->gtk_rekey_work, wusbhc_gtk_rekey_work); - - return 0; -} - - -/* Called when the HC is destroyed */ -void wusbhc_sec_destroy(struct wusbhc *wusbhc) -{ - destroy_workqueue(wusbhc->wq_security); -} - - -/** - * wusbhc_next_tkid - generate a new, currently unused, TKID - * @wusbhc: the WUSB host controller - * @wusb_dev: the device whose PTK the TKID is for - * (or NULL for a TKID for a GTK) - * - * The generated TKID consists of two parts: the device's authenticated - * address (or 0 or a GTK); and an incrementing number. This ensures - * that TKIDs cannot be shared between devices and by the time the - * incrementing number wraps around the older TKIDs will no longer be - * in use (a maximum of two keys may be active at any one time). - */ -static u32 wusbhc_next_tkid(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - u32 *tkid; - u32 addr; - - if (wusb_dev == NULL) { - tkid = &wusbhc->gtk_tkid; - addr = 0; - } else { - tkid = &wusb_port_by_idx(wusbhc, wusb_dev->port_idx)->ptk_tkid; - addr = wusb_dev->addr & 0x7f; - } - - *tkid = (addr << 8) | ((*tkid + 1) & 0xff); - - return *tkid; -} - -static void wusbhc_generate_gtk(struct wusbhc *wusbhc) -{ - const size_t key_size = sizeof(wusbhc->gtk.data); - u32 tkid; - - tkid = wusbhc_next_tkid(wusbhc, NULL); - - wusbhc->gtk.descr.tTKID[0] = (tkid >> 0) & 0xff; - wusbhc->gtk.descr.tTKID[1] = (tkid >> 8) & 0xff; - wusbhc->gtk.descr.tTKID[2] = (tkid >> 16) & 0xff; - - get_random_bytes(wusbhc->gtk.descr.bKeyData, key_size); -} - -/** - * wusbhc_sec_start - start the security management process - * @wusbhc: the WUSB host controller - * - * Generate and set an initial GTK on the host controller. - * - * Called when the HC is started. - */ -int wusbhc_sec_start(struct wusbhc *wusbhc) -{ - const size_t key_size = sizeof(wusbhc->gtk.data); - int result; - - wusbhc_generate_gtk(wusbhc); - - result = wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, - &wusbhc->gtk.descr.bKeyData, key_size); - if (result < 0) - dev_err(wusbhc->dev, "cannot set GTK for the host: %d\n", - result); - - return result; -} - -/** - * wusbhc_sec_stop - stop the security management process - * @wusbhc: the WUSB host controller - * - * Wait for any pending GTK rekeys to stop. - */ -void wusbhc_sec_stop(struct wusbhc *wusbhc) -{ - cancel_work_sync(&wusbhc->gtk_rekey_work); -} - - -/** @returns encryption type name */ -const char *wusb_et_name(u8 x) -{ - switch (x) { - case USB_ENC_TYPE_UNSECURE: return "unsecure"; - case USB_ENC_TYPE_WIRED: return "wired"; - case USB_ENC_TYPE_CCM_1: return "CCM-1"; - case USB_ENC_TYPE_RSA_1: return "RSA-1"; - default: return "unknown"; - } -} -EXPORT_SYMBOL_GPL(wusb_et_name); - -/* - * Set the device encryption method - * - * We tell the device which encryption method to use; we do this when - * setting up the device's security. - */ -static int wusb_dev_set_encryption(struct usb_device *usb_dev, int value) -{ - int result; - struct device *dev = &usb_dev->dev; - struct wusb_dev *wusb_dev = usb_dev->wusb_dev; - - if (value) { - value = wusb_dev->ccm1_etd.bEncryptionValue; - } else { - /* FIXME: should be wusb_dev->etd[UNSECURE].bEncryptionValue */ - value = 0; - } - /* Set device's */ - result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_ENCRYPTION, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - value, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "Can't set device's WUSB encryption to " - "%s (value %d): %d\n", - wusb_et_name(wusb_dev->ccm1_etd.bEncryptionType), - wusb_dev->ccm1_etd.bEncryptionValue, result); - return result; -} - -/* - * Set the GTK to be used by a device. - * - * The device must be authenticated. - */ -static int wusb_dev_set_gtk(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - struct usb_device *usb_dev = wusb_dev->usb_dev; - u8 key_index = wusb_key_index(wusbhc->gtk_index, - WUSB_KEY_INDEX_TYPE_GTK, WUSB_KEY_INDEX_ORIGINATOR_HOST); - - return usb_control_msg( - usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_DESCRIPTOR, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - USB_DT_KEY << 8 | key_index, 0, - &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength, - USB_CTRL_SET_TIMEOUT); -} - - -/* FIXME: prototype for adding security */ -int wusb_dev_sec_add(struct wusbhc *wusbhc, - struct usb_device *usb_dev, struct wusb_dev *wusb_dev) -{ - int result, bytes, secd_size; - struct device *dev = &usb_dev->dev; - struct usb_security_descriptor *secd, *new_secd; - const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL; - const void *itr, *top; - char buf[64]; - - secd = kmalloc(sizeof(*secd), GFP_KERNEL); - if (secd == NULL) { - result = -ENOMEM; - goto out; - } - - result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, - 0, secd, sizeof(*secd)); - if (result < (int)sizeof(*secd)) { - dev_err(dev, "Can't read security descriptor or " - "not enough data: %d\n", result); - goto out; - } - secd_size = le16_to_cpu(secd->wTotalLength); - new_secd = krealloc(secd, secd_size, GFP_KERNEL); - if (new_secd == NULL) { - dev_err(dev, - "Can't allocate space for security descriptors\n"); - result = -ENOMEM; - goto out; - } - secd = new_secd; - result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, - 0, secd, secd_size); - if (result < secd_size) { - dev_err(dev, "Can't read security descriptor or " - "not enough data: %d\n", result); - goto out; - } - bytes = 0; - itr = &secd[1]; - top = (void *)secd + result; - while (itr < top) { - etd = itr; - if (top - itr < sizeof(*etd)) { - dev_err(dev, "BUG: bad device security descriptor; " - "not enough data (%zu vs %zu bytes left)\n", - top - itr, sizeof(*etd)); - break; - } - if (etd->bLength < sizeof(*etd)) { - dev_err(dev, "BUG: bad device encryption descriptor; " - "descriptor is too short " - "(%u vs %zu needed)\n", - etd->bLength, sizeof(*etd)); - break; - } - itr += etd->bLength; - bytes += snprintf(buf + bytes, sizeof(buf) - bytes, - "%s (0x%02x/%02x) ", - wusb_et_name(etd->bEncryptionType), - etd->bEncryptionValue, etd->bAuthKeyIndex); - if (etd->bEncryptionType == USB_ENC_TYPE_CCM_1) - ccm1_etd = etd; - } - /* This code only supports CCM1 as of now. */ - /* FIXME: user has to choose which sec mode to use? - * In theory we want CCM */ - if (ccm1_etd == NULL) { - dev_err(dev, "WUSB device doesn't support CCM1 encryption, " - "can't use!\n"); - result = -EINVAL; - goto out; - } - wusb_dev->ccm1_etd = *ccm1_etd; - dev_dbg(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n", - buf, wusb_et_name(ccm1_etd->bEncryptionType), - ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex); - result = 0; -out: - kfree(secd); - return result; -} - -void wusb_dev_sec_rm(struct wusb_dev *wusb_dev) -{ - /* Nothing so far */ -} - -/** - * Update the address of an unauthenticated WUSB device - * - * Once we have successfully authenticated, we take it to addr0 state - * and then to a normal address. - * - * Before the device's address (as known by it) was usb_dev->devnum | - * 0x80 (unauthenticated address). With this we update it to usb_dev->devnum. - */ -int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) -{ - int result = -ENOMEM; - struct usb_device *usb_dev = wusb_dev->usb_dev; - struct device *dev = &usb_dev->dev; - u8 new_address = wusb_dev->addr & 0x7F; - - /* Set address 0 */ - result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_ADDRESS, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "auth failed: can't set address 0: %d\n", - result); - goto error_addr0; - } - result = wusb_set_dev_addr(wusbhc, wusb_dev, 0); - if (result < 0) - goto error_addr0; - usb_set_device_state(usb_dev, USB_STATE_DEFAULT); - usb_ep0_reinit(usb_dev); - - /* Set new (authenticated) address. */ - result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_ADDRESS, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - new_address, 0, NULL, 0, - USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "auth failed: can't set address %u: %d\n", - new_address, result); - goto error_addr; - } - result = wusb_set_dev_addr(wusbhc, wusb_dev, new_address); - if (result < 0) - goto error_addr; - usb_set_device_state(usb_dev, USB_STATE_ADDRESS); - usb_ep0_reinit(usb_dev); - usb_dev->authenticated = 1; -error_addr: -error_addr0: - return result; -} - -/* - * - * - */ -/* FIXME: split and cleanup */ -int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, - struct wusb_ckhdid *ck) -{ - int result = -ENOMEM; - struct usb_device *usb_dev = wusb_dev->usb_dev; - struct device *dev = &usb_dev->dev; - u32 tkid; - struct usb_handshake *hs; - struct aes_ccm_nonce ccm_n; - u8 mic[8]; - struct wusb_keydvt_in keydvt_in; - struct wusb_keydvt_out keydvt_out; - - hs = kcalloc(3, sizeof(hs[0]), GFP_KERNEL); - if (!hs) - goto error_kzalloc; - - /* We need to turn encryption before beginning the 4way - * hshake (WUSB1.0[.3.2.2]) */ - result = wusb_dev_set_encryption(usb_dev, 1); - if (result < 0) - goto error_dev_set_encryption; - - tkid = wusbhc_next_tkid(wusbhc, wusb_dev); - - hs[0].bMessageNumber = 1; - hs[0].bStatus = 0; - put_unaligned_le32(tkid, hs[0].tTKID); - hs[0].bReserved = 0; - memcpy(hs[0].CDID, &wusb_dev->cdid, sizeof(hs[0].CDID)); - get_random_bytes(&hs[0].nonce, sizeof(hs[0].nonce)); - memset(hs[0].MIC, 0, sizeof(hs[0].MIC)); /* Per WUSB1.0[T7-22] */ - - result = usb_control_msg( - usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_HANDSHAKE, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 1, 0, &hs[0], sizeof(hs[0]), USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Handshake1: request failed: %d\n", result); - goto error_hs1; - } - - /* Handshake 2, from the device -- need to verify fields */ - result = usb_control_msg( - usb_dev, usb_rcvctrlpipe(usb_dev, 0), - USB_REQ_GET_HANDSHAKE, - USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 2, 0, &hs[1], sizeof(hs[1]), USB_CTRL_GET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Handshake2: request failed: %d\n", result); - goto error_hs2; - } - - result = -EINVAL; - if (hs[1].bMessageNumber != 2) { - dev_err(dev, "Handshake2 failed: bad message number %u\n", - hs[1].bMessageNumber); - goto error_hs2; - } - if (hs[1].bStatus != 0) { - dev_err(dev, "Handshake2 failed: bad status %u\n", - hs[1].bStatus); - goto error_hs2; - } - if (memcmp(hs[0].tTKID, hs[1].tTKID, sizeof(hs[0].tTKID))) { - dev_err(dev, "Handshake2 failed: TKID mismatch " - "(#1 0x%02x%02x%02x vs #2 0x%02x%02x%02x)\n", - hs[0].tTKID[0], hs[0].tTKID[1], hs[0].tTKID[2], - hs[1].tTKID[0], hs[1].tTKID[1], hs[1].tTKID[2]); - goto error_hs2; - } - if (memcmp(hs[0].CDID, hs[1].CDID, sizeof(hs[0].CDID))) { - dev_err(dev, "Handshake2 failed: CDID mismatch\n"); - goto error_hs2; - } - - /* Setup the CCM nonce */ - memset(&ccm_n.sfn, 0, sizeof(ccm_n.sfn)); /* Per WUSB1.0[6.5.2] */ - put_unaligned_le32(tkid, ccm_n.tkid); - ccm_n.src_addr = wusbhc->uwb_rc->uwb_dev.dev_addr; - ccm_n.dest_addr.data[0] = wusb_dev->addr; - ccm_n.dest_addr.data[1] = 0; - - /* Derive the KCK and PTK from CK, the CCM, H and D nonces */ - memcpy(keydvt_in.hnonce, hs[0].nonce, sizeof(keydvt_in.hnonce)); - memcpy(keydvt_in.dnonce, hs[1].nonce, sizeof(keydvt_in.dnonce)); - result = wusb_key_derive(&keydvt_out, ck->data, &ccm_n, &keydvt_in); - if (result < 0) { - dev_err(dev, "Handshake2 failed: cannot derive keys: %d\n", - result); - goto error_hs2; - } - - /* Compute MIC and verify it */ - result = wusb_oob_mic(mic, keydvt_out.kck, &ccm_n, &hs[1]); - if (result < 0) { - dev_err(dev, "Handshake2 failed: cannot compute MIC: %d\n", - result); - goto error_hs2; - } - - if (memcmp(hs[1].MIC, mic, sizeof(hs[1].MIC))) { - dev_err(dev, "Handshake2 failed: MIC mismatch\n"); - goto error_hs2; - } - - /* Send Handshake3 */ - hs[2].bMessageNumber = 3; - hs[2].bStatus = 0; - put_unaligned_le32(tkid, hs[2].tTKID); - hs[2].bReserved = 0; - memcpy(hs[2].CDID, &wusb_dev->cdid, sizeof(hs[2].CDID)); - memcpy(hs[2].nonce, hs[0].nonce, sizeof(hs[2].nonce)); - result = wusb_oob_mic(hs[2].MIC, keydvt_out.kck, &ccm_n, &hs[2]); - if (result < 0) { - dev_err(dev, "Handshake3 failed: cannot compute MIC: %d\n", - result); - goto error_hs2; - } - - result = usb_control_msg( - usb_dev, usb_sndctrlpipe(usb_dev, 0), - USB_REQ_SET_HANDSHAKE, - USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 3, 0, &hs[2], sizeof(hs[2]), USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "Handshake3: request failed: %d\n", result); - goto error_hs3; - } - - result = wusbhc->set_ptk(wusbhc, wusb_dev->port_idx, tkid, - keydvt_out.ptk, sizeof(keydvt_out.ptk)); - if (result < 0) - goto error_wusbhc_set_ptk; - - result = wusb_dev_set_gtk(wusbhc, wusb_dev); - if (result < 0) { - dev_err(dev, "Set GTK for device: request failed: %d\n", - result); - goto error_wusbhc_set_gtk; - } - - /* Update the device's address from unauth to auth */ - if (usb_dev->authenticated == 0) { - result = wusb_dev_update_address(wusbhc, wusb_dev); - if (result < 0) - goto error_dev_update_address; - } - result = 0; - dev_info(dev, "device authenticated\n"); - -error_dev_update_address: -error_wusbhc_set_gtk: -error_wusbhc_set_ptk: -error_hs3: -error_hs2: -error_hs1: - memset(hs, 0, 3*sizeof(hs[0])); - memzero_explicit(&keydvt_out, sizeof(keydvt_out)); - memzero_explicit(&keydvt_in, sizeof(keydvt_in)); - memzero_explicit(&ccm_n, sizeof(ccm_n)); - memzero_explicit(mic, sizeof(mic)); - if (result < 0) - wusb_dev_set_encryption(usb_dev, 0); -error_dev_set_encryption: - kfree(hs); -error_kzalloc: - return result; -} - -/* - * Once all connected and authenticated devices have received the new - * GTK, switch the host to using it. - */ -static void wusbhc_gtk_rekey_work(struct work_struct *work) -{ - struct wusbhc *wusbhc = container_of(work, - struct wusbhc, gtk_rekey_work); - size_t key_size = sizeof(wusbhc->gtk.data); - int port_idx; - struct wusb_dev *wusb_dev, *wusb_dev_next; - LIST_HEAD(rekey_list); - - mutex_lock(&wusbhc->mutex); - /* generate the new key */ - wusbhc_generate_gtk(wusbhc); - /* roll the gtk index. */ - wusbhc->gtk_index = (wusbhc->gtk_index + 1) % (WUSB_KEY_INDEX_MAX + 1); - /* - * Save all connected devices on a list while holding wusbhc->mutex and - * take a reference to each one. Then submit the set key request to - * them after releasing the lock in order to avoid a deadlock. - */ - for (port_idx = 0; port_idx < wusbhc->ports_max; port_idx++) { - wusb_dev = wusbhc->port[port_idx].wusb_dev; - if (!wusb_dev || !wusb_dev->usb_dev - || !wusb_dev->usb_dev->authenticated) - continue; - - wusb_dev_get(wusb_dev); - list_add_tail(&wusb_dev->rekey_node, &rekey_list); - } - mutex_unlock(&wusbhc->mutex); - - /* Submit the rekey requests without holding wusbhc->mutex. */ - list_for_each_entry_safe(wusb_dev, wusb_dev_next, &rekey_list, - rekey_node) { - list_del_init(&wusb_dev->rekey_node); - dev_dbg(&wusb_dev->usb_dev->dev, - "%s: rekey device at port %d\n", - __func__, wusb_dev->port_idx); - - if (wusb_dev_set_gtk(wusbhc, wusb_dev) < 0) { - dev_err(&wusb_dev->usb_dev->dev, - "%s: rekey device at port %d failed\n", - __func__, wusb_dev->port_idx); - } - wusb_dev_put(wusb_dev); - } - - /* Switch the host controller to use the new GTK. */ - mutex_lock(&wusbhc->mutex); - wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, - &wusbhc->gtk.descr.bKeyData, key_size); - mutex_unlock(&wusbhc->mutex); -} - -/** - * wusbhc_gtk_rekey - generate and distribute a new GTK - * @wusbhc: the WUSB host controller - * - * Generate a new GTK and distribute it to all connected and - * authenticated devices. When all devices have the new GTK, the host - * starts using it. - * - * This must be called after every device disconnect (see [WUSB] - * section 6.2.11.2). - */ -void wusbhc_gtk_rekey(struct wusbhc *wusbhc) -{ - /* - * We need to submit a URB to the downstream WUSB devices in order to - * change the group key. This can't be done while holding the - * wusbhc->mutex since that is also taken in the urb_enqueue routine - * and will cause a deadlock. Instead, queue a work item to do - * it when the lock is not held - */ - queue_work(wusbhc->wq_security, &wusbhc->gtk_rekey_work); -} diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c deleted file mode 100644 index 6827075fb8a1..000000000000 --- a/drivers/usb/wusbcore/wa-hc.c +++ /dev/null @@ -1,88 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wire Adapter Host Controller Driver - * Common items to HWA and DWA based HCDs - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - */ -#include <linux/slab.h> -#include <linux/module.h> -#include "wusbhc.h" -#include "wa-hc.h" - -/** - * Assumes - * - * wa->usb_dev and wa->usb_iface initialized and refcounted, - * wa->wa_descr initialized. - */ -int wa_create(struct wahc *wa, struct usb_interface *iface, - kernel_ulong_t quirks) -{ - int result; - struct device *dev = &iface->dev; - - if (iface->cur_altsetting->desc.bNumEndpoints < 3) - return -ENODEV; - - result = wa_rpipes_create(wa); - if (result < 0) - goto error_rpipes_create; - wa->quirks = quirks; - /* Fill up Data Transfer EP pointers */ - wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc; - wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc; - wa->dti_buf_size = usb_endpoint_maxp(wa->dti_epd); - wa->dti_buf = kmalloc(wa->dti_buf_size, GFP_KERNEL); - if (wa->dti_buf == NULL) { - result = -ENOMEM; - goto error_dti_buf_alloc; - } - result = wa_nep_create(wa, iface); - if (result < 0) { - dev_err(dev, "WA-CDS: can't initialize notif endpoint: %d\n", - result); - goto error_nep_create; - } - return 0; - -error_nep_create: - kfree(wa->dti_buf); -error_dti_buf_alloc: - wa_rpipes_destroy(wa); -error_rpipes_create: - return result; -} -EXPORT_SYMBOL_GPL(wa_create); - - -void __wa_destroy(struct wahc *wa) -{ - if (wa->dti_urb) { - usb_kill_urb(wa->dti_urb); - usb_put_urb(wa->dti_urb); - } - kfree(wa->dti_buf); - wa_nep_destroy(wa); - wa_rpipes_destroy(wa); -} -EXPORT_SYMBOL_GPL(__wa_destroy); - -/** - * wa_reset_all - reset the WA device - * @wa: the WA to be reset - * - * For HWAs the radio controller and all other PALs are also reset. - */ -void wa_reset_all(struct wahc *wa) -{ - /* FIXME: assuming HWA. */ - wusbhc_reset_all(wa->wusb); -} - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Wireless USB Wire Adapter core"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h deleted file mode 100644 index ec90fff21deb..000000000000 --- a/drivers/usb/wusbcore/wa-hc.h +++ /dev/null @@ -1,467 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * HWA Host Controller Driver - * Wire Adapter Control/Data Streaming Iface (WUSB1.0[8]) - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This driver implements a USB Host Controller (struct usb_hcd) for a - * Wireless USB Host Controller based on the Wireless USB 1.0 - * Host-Wire-Adapter specification (in layman terms, a USB-dongle that - * implements a Wireless USB host). - * - * Check out the Design-overview.txt file in the source documentation - * for other details on the implementation. - * - * Main blocks: - * - * driver glue with the driver API, workqueue daemon - * - * lc RC instance life cycle management (create, destroy...) - * - * hcd glue with the USB API Host Controller Interface API. - * - * nep Notification EndPoint management: collect notifications - * and queue them with the workqueue daemon. - * - * Handle notifications as coming from the NEP. Sends them - * off others to their respective modules (eg: connect, - * disconnect and reset go to devconnect). - * - * rpipe Remote Pipe management; rpipe is what we use to write - * to an endpoint on a WUSB device that is connected to a - * HWA RC. - * - * xfer Transfer management -- this is all the code that gets a - * buffer and pushes it to a device (or viceversa). * - * - * Some day a lot of this code will be shared between this driver and - * the drivers for DWA (xfer, rpipe). - * - * All starts at driver.c:hwahc_probe(), when one of this guys is - * connected. hwahc_disconnect() stops it. - * - * During operation, the main driver is devices connecting or - * disconnecting. They cause the HWA RC to send notifications into - * nep.c:hwahc_nep_cb() that will dispatch them to - * notif.c:wa_notif_dispatch(). From there they will fan to cause - * device connects, disconnects, etc. - * - * Note much of the activity is difficult to follow. For example a - * device connect goes to devconnect, which will cause the "fake" root - * hub port to show a connect and stop there. Then hub_wq will notice - * and call into the rh.c:hwahc_rc_port_reset() code to authenticate - * the device (and this might require user intervention) and enable - * the port. - * - * We also have a timer workqueue going from devconnect.c that - * schedules in hwahc_devconnect_create(). - * - * The rest of the traffic is in the usual entry points of a USB HCD, - * which are hooked up in driver.c:hwahc_rc_driver, and defined in - * hcd.c. - */ - -#ifndef __HWAHC_INTERNAL_H__ -#define __HWAHC_INTERNAL_H__ - -#include <linux/completion.h> -#include <linux/usb.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> -#include <linux/uwb.h> -#include <linux/usb/wusb.h> -#include <linux/usb/wusb-wa.h> - -struct wusbhc; -struct wahc; -extern void wa_urb_enqueue_run(struct work_struct *ws); -extern void wa_process_errored_transfers_run(struct work_struct *ws); - -/** - * RPipe instance - * - * @descr's fields are kept in LE, as we need to send it back and - * forth. - * - * @wa is referenced when set - * - * @segs_available is the number of requests segments that still can - * be submitted to the controller without overloading - * it. It is initialized to descr->wRequests when - * aiming. - * - * A rpipe supports a max of descr->wRequests at the same time; before - * submitting seg_lock has to be taken. If segs_avail > 0, then we can - * submit; if not, we have to queue them. - */ -struct wa_rpipe { - struct kref refcnt; - struct usb_rpipe_descriptor descr; - struct usb_host_endpoint *ep; - struct wahc *wa; - spinlock_t seg_lock; - struct list_head seg_list; - struct list_head list_node; - atomic_t segs_available; - u8 buffer[1]; /* For reads/writes on USB */ -}; - - -enum wa_dti_state { - WA_DTI_TRANSFER_RESULT_PENDING, - WA_DTI_ISOC_PACKET_STATUS_PENDING, - WA_DTI_BUF_IN_DATA_PENDING -}; - -enum wa_quirks { - /* - * The Alereon HWA expects the data frames in isochronous transfer - * requests to be concatenated and not sent as separate packets. - */ - WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC = 0x01, - /* - * The Alereon HWA can be instructed to not send transfer notifications - * as an optimization. - */ - WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS = 0x02, -}; - -enum wa_vendor_specific_requests { - WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS = 0x4C, - WA_REQ_ALEREON_FEATURE_SET = 0x01, - WA_REQ_ALEREON_FEATURE_CLEAR = 0x00, -}; - -#define WA_MAX_BUF_IN_URBS 4 -/** - * Instance of a HWA Host Controller - * - * Except where a more specific lock/mutex applies or atomic, all - * fields protected by @mutex. - * - * @wa_descr Can be accessed without locking because it is in - * the same area where the device descriptors were - * read, so it is guaranteed to exist unmodified while - * the device exists. - * - * Endianess has been converted to CPU's. - * - * @nep_* can be accessed without locking as its processing is - * serialized; we submit a NEP URB and it comes to - * hwahc_nep_cb(), which won't issue another URB until it is - * done processing it. - * - * @xfer_list: - * - * List of active transfers to verify existence from a xfer id - * gotten from the xfer result message. Can't use urb->list because - * it goes by endpoint, and we don't know the endpoint at the time - * when we get the xfer result message. We can't really rely on the - * pointer (will have to change for 64 bits) as the xfer id is 32 bits. - * - * @xfer_delayed_list: List of transfers that need to be started - * (with a workqueue, because they were - * submitted from an atomic context). - * - * FIXME: this needs to be layered up: a wusbhc layer (for sharing - * commonalities with WHCI), a wa layer (for sharing - * commonalities with DWA-RC). - */ -struct wahc { - struct usb_device *usb_dev; - struct usb_interface *usb_iface; - - /* HC to deliver notifications */ - union { - struct wusbhc *wusb; - struct dwahc *dwa; - }; - - const struct usb_endpoint_descriptor *dto_epd, *dti_epd; - const struct usb_wa_descriptor *wa_descr; - - struct urb *nep_urb; /* Notification EndPoint [lockless] */ - struct edc nep_edc; - void *nep_buffer; - size_t nep_buffer_size; - - atomic_t notifs_queued; - - u16 rpipes; - unsigned long *rpipe_bm; /* rpipe usage bitmap */ - struct list_head rpipe_delayed_list; /* delayed RPIPES. */ - spinlock_t rpipe_lock; /* protect rpipe_bm and delayed list */ - struct mutex rpipe_mutex; /* assigning resources to endpoints */ - - /* - * dti_state is used to track the state of the dti_urb. When dti_state - * is WA_DTI_ISOC_PACKET_STATUS_PENDING, dti_isoc_xfer_in_progress and - * dti_isoc_xfer_seg identify which xfer the incoming isoc packet - * status refers to. - */ - enum wa_dti_state dti_state; - u32 dti_isoc_xfer_in_progress; - u8 dti_isoc_xfer_seg; - struct urb *dti_urb; /* URB for reading xfer results */ - /* URBs for reading data in */ - struct urb buf_in_urbs[WA_MAX_BUF_IN_URBS]; - int active_buf_in_urbs; /* number of buf_in_urbs active. */ - struct edc dti_edc; /* DTI error density counter */ - void *dti_buf; - size_t dti_buf_size; - - unsigned long dto_in_use; /* protect dto endoint serialization */ - - s32 status; /* For reading status */ - - struct list_head xfer_list; - struct list_head xfer_delayed_list; - struct list_head xfer_errored_list; - /* - * lock for the above xfer lists. Can be taken while a xfer->lock is - * held but not in the reverse order. - */ - spinlock_t xfer_list_lock; - struct work_struct xfer_enqueue_work; - struct work_struct xfer_error_work; - atomic_t xfer_id_count; - - kernel_ulong_t quirks; -}; - - -extern int wa_create(struct wahc *wa, struct usb_interface *iface, - kernel_ulong_t); -extern void __wa_destroy(struct wahc *wa); -extern int wa_dti_start(struct wahc *wa); -void wa_reset_all(struct wahc *wa); - - -/* Miscellaneous constants */ -enum { - /** Max number of EPROTO errors we tolerate on the NEP in a - * period of time */ - HWAHC_EPROTO_MAX = 16, - /** Period of time for EPROTO errors (in jiffies) */ - HWAHC_EPROTO_PERIOD = 4 * HZ, -}; - - -/* Notification endpoint handling */ -extern int wa_nep_create(struct wahc *, struct usb_interface *); -extern void wa_nep_destroy(struct wahc *); - -static inline int wa_nep_arm(struct wahc *wa, gfp_t gfp_mask) -{ - struct urb *urb = wa->nep_urb; - urb->transfer_buffer = wa->nep_buffer; - urb->transfer_buffer_length = wa->nep_buffer_size; - return usb_submit_urb(urb, gfp_mask); -} - -static inline void wa_nep_disarm(struct wahc *wa) -{ - usb_kill_urb(wa->nep_urb); -} - - -/* RPipes */ -static inline void wa_rpipe_init(struct wahc *wa) -{ - INIT_LIST_HEAD(&wa->rpipe_delayed_list); - spin_lock_init(&wa->rpipe_lock); - mutex_init(&wa->rpipe_mutex); -} - -static inline void wa_init(struct wahc *wa) -{ - int index; - - edc_init(&wa->nep_edc); - atomic_set(&wa->notifs_queued, 0); - wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; - wa_rpipe_init(wa); - edc_init(&wa->dti_edc); - INIT_LIST_HEAD(&wa->xfer_list); - INIT_LIST_HEAD(&wa->xfer_delayed_list); - INIT_LIST_HEAD(&wa->xfer_errored_list); - spin_lock_init(&wa->xfer_list_lock); - INIT_WORK(&wa->xfer_enqueue_work, wa_urb_enqueue_run); - INIT_WORK(&wa->xfer_error_work, wa_process_errored_transfers_run); - wa->dto_in_use = 0; - atomic_set(&wa->xfer_id_count, 1); - /* init the buf in URBs */ - for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index) - usb_init_urb(&(wa->buf_in_urbs[index])); - wa->active_buf_in_urbs = 0; -} - -/** - * Destroy a pipe (when refcount drops to zero) - * - * Assumes it has been moved to the "QUIESCING" state. - */ -struct wa_xfer; -extern void rpipe_destroy(struct kref *_rpipe); -static inline -void __rpipe_get(struct wa_rpipe *rpipe) -{ - kref_get(&rpipe->refcnt); -} -extern int rpipe_get_by_ep(struct wahc *, struct usb_host_endpoint *, - struct urb *, gfp_t); -static inline void rpipe_put(struct wa_rpipe *rpipe) -{ - kref_put(&rpipe->refcnt, rpipe_destroy); - -} -extern void rpipe_ep_disable(struct wahc *, struct usb_host_endpoint *); -extern void rpipe_clear_feature_stalled(struct wahc *, - struct usb_host_endpoint *); -extern int wa_rpipes_create(struct wahc *); -extern void wa_rpipes_destroy(struct wahc *); -static inline void rpipe_avail_dec(struct wa_rpipe *rpipe) -{ - atomic_dec(&rpipe->segs_available); -} - -/** - * Returns true if the rpipe is ready to submit more segments. - */ -static inline int rpipe_avail_inc(struct wa_rpipe *rpipe) -{ - return atomic_inc_return(&rpipe->segs_available) > 0 - && !list_empty(&rpipe->seg_list); -} - - -/* Transferring data */ -extern int wa_urb_enqueue(struct wahc *, struct usb_host_endpoint *, - struct urb *, gfp_t); -extern int wa_urb_dequeue(struct wahc *, struct urb *, int); -extern void wa_handle_notif_xfer(struct wahc *, struct wa_notif_hdr *); - - -/* Misc - * - * FIXME: Refcounting for the actual @hwahc object is not correct; I - * mean, this should be refcounting on the HCD underneath, but - * it is not. In any case, the semantics for HCD refcounting - * are *weird*...on refcount reaching zero it just frees - * it...no RC specific function is called...unless I miss - * something. - * - * FIXME: has to go away in favour of a 'struct' hcd based solution - */ -static inline struct wahc *wa_get(struct wahc *wa) -{ - usb_get_intf(wa->usb_iface); - return wa; -} - -static inline void wa_put(struct wahc *wa) -{ - usb_put_intf(wa->usb_iface); -} - - -static inline int __wa_feature(struct wahc *wa, unsigned op, u16 feature) -{ - return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - op ? USB_REQ_SET_FEATURE : USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - feature, - wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - NULL, 0, USB_CTRL_SET_TIMEOUT); -} - - -static inline int __wa_set_feature(struct wahc *wa, u16 feature) -{ - return __wa_feature(wa, 1, feature); -} - - -static inline int __wa_clear_feature(struct wahc *wa, u16 feature) -{ - return __wa_feature(wa, 0, feature); -} - - -/** - * Return the status of a Wire Adapter - * - * @wa: Wire Adapter instance - * @returns < 0 errno code on error, or status bitmap as described - * in WUSB1.0[8.3.1.6]. - * - * NOTE: need malloc, some arches don't take USB from the stack - */ -static inline -s32 __wa_get_status(struct wahc *wa) -{ - s32 result; - result = usb_control_msg( - wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), - USB_REQ_GET_STATUS, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, - &wa->status, sizeof(wa->status), USB_CTRL_GET_TIMEOUT); - if (result >= 0) - result = wa->status; - return result; -} - - -/** - * Waits until the Wire Adapter's status matches @mask/@value - * - * @wa: Wire Adapter instance. - * @returns < 0 errno code on error, otherwise status. - * - * Loop until the WAs status matches the mask and value (status & mask - * == value). Timeout if it doesn't happen. - * - * FIXME: is there an official specification on how long status - * changes can take? - */ -static inline s32 __wa_wait_status(struct wahc *wa, u32 mask, u32 value) -{ - s32 result; - unsigned loops = 10; - do { - msleep(50); - result = __wa_get_status(wa); - if ((result & mask) == value) - break; - if (loops-- == 0) { - result = -ETIMEDOUT; - break; - } - } while (result >= 0); - return result; -} - - -/** Command @hwahc to stop, @returns 0 if ok, < 0 errno code on error */ -static inline int __wa_stop(struct wahc *wa) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - - result = __wa_clear_feature(wa, WA_ENABLE); - if (result < 0 && result != -ENODEV) { - dev_err(dev, "error commanding HC to stop: %d\n", result); - goto out; - } - result = __wa_wait_status(wa, WA_ENABLE, 0); - if (result < 0 && result != -ENODEV) - dev_err(dev, "error waiting for HC to stop: %d\n", result); -out: - return 0; -} - - -#endif /* #ifndef __HWAHC_INTERNAL_H__ */ diff --git a/drivers/usb/wusbcore/wa-nep.c b/drivers/usb/wusbcore/wa-nep.c deleted file mode 100644 index 5f0656db5482..000000000000 --- a/drivers/usb/wusbcore/wa-nep.c +++ /dev/null @@ -1,289 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) - * Notification EndPoint support - * - * Copyright (C) 2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This part takes care of getting the notification from the hw - * only and dispatching through wusbwad into - * wa_notif_dispatch. Handling is done there. - * - * WA notifications are limited in size; most of them are three or - * four bytes long, and the longest is the HWA Device Notification, - * which would not exceed 38 bytes (DNs are limited in payload to 32 - * bytes plus 3 bytes header (WUSB1.0[7.6p2]), plus 3 bytes HWA - * header (WUSB1.0[8.5.4.2]). - * - * It is not clear if more than one Device Notification can be packed - * in a HWA Notification, I assume no because of the wording in - * WUSB1.0[8.5.4.2]. In any case, the bigger any notification could - * get is 256 bytes (as the bLength field is a byte). - * - * So what we do is we have this buffer and read into it; when a - * notification arrives we schedule work to a specific, single thread - * workqueue (so notifications are serialized) and copy the - * notification data. After scheduling the work, we rearm the read from - * the notification endpoint. - * - * Entry points here are: - * - * wa_nep_[create|destroy]() To initialize/release this subsystem - * - * wa_nep_cb() Callback for the notification - * endpoint; when data is ready, this - * does the dispatching. - */ -#include <linux/workqueue.h> -#include <linux/ctype.h> -#include <linux/slab.h> - -#include "wa-hc.h" -#include "wusbhc.h" - -/* Structure for queueing notifications to the workqueue */ -struct wa_notif_work { - struct work_struct work; - struct wahc *wa; - size_t size; - u8 data[]; -}; - -/* - * Process incoming notifications from the WA's Notification EndPoint - * [the wuswad daemon, basically] - * - * @_nw: Pointer to a descriptor which has the pointer to the - * @wa, the size of the buffer and the work queue - * structure (so we can free all when done). - * @returns 0 if ok, < 0 errno code on error. - * - * All notifications follow the same format; they need to start with a - * 'struct wa_notif_hdr' header, so it is easy to parse through - * them. We just break the buffer in individual notifications (the - * standard doesn't say if it can be done or is forbidden, so we are - * cautious) and dispatch each. - * - * So the handling layers are is: - * - * WA specific notification (from NEP) - * Device Notification Received -> wa_handle_notif_dn() - * WUSB Device notification generic handling - * BPST Adjustment -> wa_handle_notif_bpst_adj() - * ... -> ... - * - * @wa has to be referenced - */ -static void wa_notif_dispatch(struct work_struct *ws) -{ - void *itr; - u8 missing = 0; - struct wa_notif_work *nw = container_of(ws, struct wa_notif_work, - work); - struct wahc *wa = nw->wa; - struct wa_notif_hdr *notif_hdr; - size_t size; - - struct device *dev = &wa->usb_iface->dev; - -#if 0 - /* FIXME: need to check for this??? */ - if (usb_hcd->state == HC_STATE_QUIESCING) /* Going down? */ - goto out; /* screw it */ -#endif - atomic_dec(&wa->notifs_queued); /* Throttling ctl */ - size = nw->size; - itr = nw->data; - - while (size) { - if (size < sizeof(*notif_hdr)) { - missing = sizeof(*notif_hdr) - size; - goto exhausted_buffer; - } - notif_hdr = itr; - if (size < notif_hdr->bLength) - goto exhausted_buffer; - itr += notif_hdr->bLength; - size -= notif_hdr->bLength; - /* Dispatch the notification [don't use itr or size!] */ - switch (notif_hdr->bNotifyType) { - case HWA_NOTIF_DN: { - struct hwa_notif_dn *hwa_dn; - hwa_dn = container_of(notif_hdr, struct hwa_notif_dn, - hdr); - wusbhc_handle_dn(wa->wusb, hwa_dn->bSourceDeviceAddr, - hwa_dn->dndata, - notif_hdr->bLength - sizeof(*hwa_dn)); - break; - } - case WA_NOTIF_TRANSFER: - wa_handle_notif_xfer(wa, notif_hdr); - break; - case HWA_NOTIF_BPST_ADJ: - break; /* no action needed for BPST ADJ. */ - case DWA_NOTIF_RWAKE: - case DWA_NOTIF_PORTSTATUS: - /* FIXME: unimplemented WA NOTIFs */ - /* fallthru */ - default: - dev_err(dev, "HWA: unknown notification 0x%x, " - "%zu bytes; discarding\n", - notif_hdr->bNotifyType, - (size_t)notif_hdr->bLength); - break; - } - } -out: - wa_put(wa); - kfree(nw); - return; - - /* THIS SHOULD NOT HAPPEN - * - * Buffer exahusted with partial data remaining; just warn and - * discard the data, as this should not happen. - */ -exhausted_buffer: - dev_warn(dev, "HWA: device sent short notification, " - "%d bytes missing; discarding %d bytes.\n", - missing, (int)size); - goto out; -} - -/* - * Deliver incoming WA notifications to the wusbwa workqueue - * - * @wa: Pointer the Wire Adapter Controller Data Streaming - * instance (part of an 'struct usb_hcd'). - * @size: Size of the received buffer - * @returns 0 if ok, < 0 errno code on error. - * - * The input buffer is @wa->nep_buffer, with @size bytes - * (guaranteed to fit in the allocated space, - * @wa->nep_buffer_size). - */ -static int wa_nep_queue(struct wahc *wa, size_t size) -{ - int result = 0; - struct device *dev = &wa->usb_iface->dev; - struct wa_notif_work *nw; - - /* dev_fnstart(dev, "(wa %p, size %zu)\n", wa, size); */ - BUG_ON(size > wa->nep_buffer_size); - if (size == 0) - goto out; - if (atomic_read(&wa->notifs_queued) > 200) { - if (printk_ratelimit()) - dev_err(dev, "Too many notifications queued, " - "throttling back\n"); - goto out; - } - nw = kzalloc(sizeof(*nw) + size, GFP_ATOMIC); - if (nw == NULL) { - if (printk_ratelimit()) - dev_err(dev, "No memory to queue notification\n"); - result = -ENOMEM; - goto out; - } - INIT_WORK(&nw->work, wa_notif_dispatch); - nw->wa = wa_get(wa); - nw->size = size; - memcpy(nw->data, wa->nep_buffer, size); - atomic_inc(&wa->notifs_queued); /* Throttling ctl */ - queue_work(wusbd, &nw->work); -out: - /* dev_fnend(dev, "(wa %p, size %zu) = result\n", wa, size, result); */ - return result; -} - -/* - * Callback for the notification event endpoint - * - * Check's that everything is fine and then passes the data to be - * queued to the workqueue. - */ -static void wa_nep_cb(struct urb *urb) -{ - int result; - struct wahc *wa = urb->context; - struct device *dev = &wa->usb_iface->dev; - - switch (result = urb->status) { - case 0: - result = wa_nep_queue(wa, urb->actual_length); - if (result < 0) - dev_err(dev, "NEP: unable to process notification(s): " - "%d\n", result); - break; - case -ECONNRESET: /* Not an error, but a controlled situation; */ - case -ENOENT: /* (we killed the URB)...so, no broadcast */ - case -ESHUTDOWN: - dev_dbg(dev, "NEP: going down %d\n", urb->status); - goto out; - default: /* On general errors, we retry unless it gets ugly */ - if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "NEP: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - goto out; - } - dev_err(dev, "NEP: URB error %d\n", urb->status); - } - result = wa_nep_arm(wa, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "NEP: cannot submit URB: %d\n", result); - wa_reset_all(wa); - } -out: - return; -} - -/* - * Initialize @wa's notification and event's endpoint stuff - * - * This includes the allocating the read buffer, the context ID - * allocation bitmap, the URB and submitting the URB. - */ -int wa_nep_create(struct wahc *wa, struct usb_interface *iface) -{ - int result; - struct usb_endpoint_descriptor *epd; - struct usb_device *usb_dev = interface_to_usbdev(iface); - struct device *dev = &iface->dev; - - edc_init(&wa->nep_edc); - epd = &iface->cur_altsetting->endpoint[0].desc; - wa->nep_buffer_size = 1024; - wa->nep_buffer = kmalloc(wa->nep_buffer_size, GFP_KERNEL); - if (!wa->nep_buffer) - goto error_nep_buffer; - wa->nep_urb = usb_alloc_urb(0, GFP_KERNEL); - if (wa->nep_urb == NULL) - goto error_urb_alloc; - usb_fill_int_urb(wa->nep_urb, usb_dev, - usb_rcvintpipe(usb_dev, epd->bEndpointAddress), - wa->nep_buffer, wa->nep_buffer_size, - wa_nep_cb, wa, epd->bInterval); - result = wa_nep_arm(wa, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "Cannot submit notification URB: %d\n", result); - goto error_nep_arm; - } - return 0; - -error_nep_arm: - usb_free_urb(wa->nep_urb); -error_urb_alloc: - kfree(wa->nep_buffer); -error_nep_buffer: - return -ENOMEM; -} - -void wa_nep_destroy(struct wahc *wa) -{ - wa_nep_disarm(wa); - usb_free_urb(wa->nep_urb); - kfree(wa->nep_buffer); -} diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c deleted file mode 100644 index a5734cbcd5ad..000000000000 --- a/drivers/usb/wusbcore/wa-rpipe.c +++ /dev/null @@ -1,539 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter - * rpipe management - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * FIXME: docs - * - * RPIPE - * - * Targeted at different downstream endpoints - * - * Descriptor: use to config the remote pipe. - * - * The number of blocks could be dynamic (wBlocks in descriptor is - * 0)--need to schedule them then. - * - * Each bit in wa->rpipe_bm represents if an rpipe is being used or - * not. Rpipes are represented with a 'struct wa_rpipe' that is - * attached to the hcpriv member of a 'struct usb_host_endpoint'. - * - * When you need to xfer data to an endpoint, you get an rpipe for it - * with wa_ep_rpipe_get(), which gives you a reference to the rpipe - * and keeps a single one (the first one) with the endpoint. When you - * are done transferring, you drop that reference. At the end the - * rpipe is always allocated and bound to the endpoint. There it might - * be recycled when not used. - * - * Addresses: - * - * We use a 1:1 mapping mechanism between port address (0 based - * index, actually) and the address. The USB stack knows about this. - * - * USB Stack port number 4 (1 based) - * WUSB code port index 3 (0 based) - * USB Address 5 (2 based -- 0 is for default, 1 for root hub) - * - * Now, because we don't use the concept as default address exactly - * like the (wired) USB code does, we need to kind of skip it. So we - * never take addresses from the urb->pipe, but from the - * urb->dev->devnum, to make sure that we always have the right - * destination address. - */ -#include <linux/atomic.h> -#include <linux/bitmap.h> -#include <linux/slab.h> -#include <linux/export.h> - -#include "wusbhc.h" -#include "wa-hc.h" - -static int __rpipe_get_descr(struct wahc *wa, - struct usb_rpipe_descriptor *descr, u16 index) -{ - ssize_t result; - struct device *dev = &wa->usb_iface->dev; - - /* Get the RPIPE descriptor -- we cannot use the usb_get_descriptor() - * function because the arguments are different. - */ - result = usb_control_msg( - wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), - USB_REQ_GET_DESCRIPTOR, - USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_RPIPE, - USB_DT_RPIPE<<8, index, descr, sizeof(*descr), - USB_CTRL_GET_TIMEOUT); - if (result < 0) { - dev_err(dev, "rpipe %u: get descriptor failed: %d\n", - index, (int)result); - goto error; - } - if (result < sizeof(*descr)) { - dev_err(dev, "rpipe %u: got short descriptor " - "(%zd vs %zd bytes needed)\n", - index, result, sizeof(*descr)); - result = -EINVAL; - goto error; - } - result = 0; - -error: - return result; -} - -/* - * - * The descriptor is assumed to be properly initialized (ie: you got - * it through __rpipe_get_descr()). - */ -static int __rpipe_set_descr(struct wahc *wa, - struct usb_rpipe_descriptor *descr, u16 index) -{ - ssize_t result; - struct device *dev = &wa->usb_iface->dev; - - /* we cannot use the usb_get_descriptor() function because the - * arguments are different. - */ - result = usb_control_msg( - wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_SET_DESCRIPTOR, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, - USB_DT_RPIPE<<8, index, descr, sizeof(*descr), - USB_CTRL_SET_TIMEOUT); - if (result < 0) { - dev_err(dev, "rpipe %u: set descriptor failed: %d\n", - index, (int)result); - goto error; - } - if (result < sizeof(*descr)) { - dev_err(dev, "rpipe %u: sent short descriptor " - "(%zd vs %zd bytes required)\n", - index, result, sizeof(*descr)); - result = -EINVAL; - goto error; - } - result = 0; - -error: - return result; - -} - -static void rpipe_init(struct wa_rpipe *rpipe) -{ - kref_init(&rpipe->refcnt); - spin_lock_init(&rpipe->seg_lock); - INIT_LIST_HEAD(&rpipe->seg_list); - INIT_LIST_HEAD(&rpipe->list_node); -} - -static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx) -{ - unsigned long flags; - - spin_lock_irqsave(&wa->rpipe_lock, flags); - rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx); - if (rpipe_idx < wa->rpipes) - set_bit(rpipe_idx, wa->rpipe_bm); - spin_unlock_irqrestore(&wa->rpipe_lock, flags); - - return rpipe_idx; -} - -static void rpipe_put_idx(struct wahc *wa, unsigned rpipe_idx) -{ - unsigned long flags; - - spin_lock_irqsave(&wa->rpipe_lock, flags); - clear_bit(rpipe_idx, wa->rpipe_bm); - spin_unlock_irqrestore(&wa->rpipe_lock, flags); -} - -void rpipe_destroy(struct kref *_rpipe) -{ - struct wa_rpipe *rpipe = container_of(_rpipe, struct wa_rpipe, refcnt); - u8 index = le16_to_cpu(rpipe->descr.wRPipeIndex); - - if (rpipe->ep) - rpipe->ep->hcpriv = NULL; - rpipe_put_idx(rpipe->wa, index); - wa_put(rpipe->wa); - kfree(rpipe); -} -EXPORT_SYMBOL_GPL(rpipe_destroy); - -/* - * Locate an idle rpipe, create an structure for it and return it - * - * @wa is referenced and unlocked - * @crs enum rpipe_attr, required endpoint characteristics - * - * The rpipe can be used only sequentially (not in parallel). - * - * The rpipe is moved into the "ready" state. - */ -static int rpipe_get_idle(struct wa_rpipe **prpipe, struct wahc *wa, u8 crs, - gfp_t gfp) -{ - int result; - unsigned rpipe_idx; - struct wa_rpipe *rpipe; - struct device *dev = &wa->usb_iface->dev; - - rpipe = kzalloc(sizeof(*rpipe), gfp); - if (rpipe == NULL) - return -ENOMEM; - rpipe_init(rpipe); - - /* Look for an idle pipe */ - for (rpipe_idx = 0; rpipe_idx < wa->rpipes; rpipe_idx++) { - rpipe_idx = rpipe_get_idx(wa, rpipe_idx); - if (rpipe_idx >= wa->rpipes) /* no more pipes :( */ - break; - result = __rpipe_get_descr(wa, &rpipe->descr, rpipe_idx); - if (result < 0) - dev_err(dev, "Can't get descriptor for rpipe %u: %d\n", - rpipe_idx, result); - else if ((rpipe->descr.bmCharacteristics & crs) != 0) - goto found; - rpipe_put_idx(wa, rpipe_idx); - } - *prpipe = NULL; - kfree(rpipe); - return -ENXIO; - -found: - set_bit(rpipe_idx, wa->rpipe_bm); - rpipe->wa = wa_get(wa); - *prpipe = rpipe; - return 0; -} - -static int __rpipe_reset(struct wahc *wa, unsigned index) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - - result = usb_control_msg( - wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_RPIPE_RESET, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, - 0, index, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (result < 0) - dev_err(dev, "rpipe %u: reset failed: %d\n", - index, result); - return result; -} - -/* - * Fake companion descriptor for ep0 - * - * See WUSB1.0[7.4.4], most of this is zero for bulk/int/ctl - */ -static struct usb_wireless_ep_comp_descriptor epc0 = { - .bLength = sizeof(epc0), - .bDescriptorType = USB_DT_WIRELESS_ENDPOINT_COMP, - .bMaxBurst = 1, - .bMaxSequence = 2, -}; - -/* - * Look for EP companion descriptor - * - * Get there, look for Inara in the endpoint's extra descriptors - */ -static struct usb_wireless_ep_comp_descriptor *rpipe_epc_find( - struct device *dev, struct usb_host_endpoint *ep) -{ - void *itr; - size_t itr_size; - struct usb_descriptor_header *hdr; - struct usb_wireless_ep_comp_descriptor *epcd; - - if (ep->desc.bEndpointAddress == 0) { - epcd = &epc0; - goto out; - } - itr = ep->extra; - itr_size = ep->extralen; - epcd = NULL; - while (itr_size > 0) { - if (itr_size < sizeof(*hdr)) { - dev_err(dev, "HW Bug? ep 0x%02x: extra descriptors " - "at offset %zu: only %zu bytes left\n", - ep->desc.bEndpointAddress, - itr - (void *) ep->extra, itr_size); - break; - } - hdr = itr; - if (hdr->bDescriptorType == USB_DT_WIRELESS_ENDPOINT_COMP) { - epcd = itr; - break; - } - if (hdr->bLength > itr_size) { - dev_err(dev, "HW Bug? ep 0x%02x: extra descriptor " - "at offset %zu (type 0x%02x) " - "length %d but only %zu bytes left\n", - ep->desc.bEndpointAddress, - itr - (void *) ep->extra, hdr->bDescriptorType, - hdr->bLength, itr_size); - break; - } - itr += hdr->bLength; - itr_size -= hdr->bLength; - } -out: - return epcd; -} - -/* - * Aim an rpipe to its device & endpoint destination - * - * Make sure we change the address to unauthenticated if the device - * is WUSB and it is not authenticated. - */ -static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa, - struct usb_host_endpoint *ep, struct urb *urb, gfp_t gfp) -{ - int result = -ENOMSG; /* better code for lack of companion? */ - struct device *dev = &wa->usb_iface->dev; - struct usb_device *usb_dev = urb->dev; - struct usb_wireless_ep_comp_descriptor *epcd; - u32 ack_window, epcd_max_sequence; - u8 unauth; - - epcd = rpipe_epc_find(dev, ep); - if (epcd == NULL) { - dev_err(dev, "ep 0x%02x: can't find companion descriptor\n", - ep->desc.bEndpointAddress); - goto error; - } - unauth = usb_dev->wusb && !usb_dev->authenticated ? 0x80 : 0; - __rpipe_reset(wa, le16_to_cpu(rpipe->descr.wRPipeIndex)); - atomic_set(&rpipe->segs_available, - le16_to_cpu(rpipe->descr.wRequests)); - /* FIXME: block allocation system; request with queuing and timeout */ - /* FIXME: compute so seg_size > ep->maxpktsize */ - rpipe->descr.wBlocks = cpu_to_le16(16); /* given */ - /* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */ - if (usb_endpoint_xfer_isoc(&ep->desc)) - rpipe->descr.wMaxPacketSize = epcd->wOverTheAirPacketSize; - else - rpipe->descr.wMaxPacketSize = ep->desc.wMaxPacketSize; - - rpipe->descr.hwa_bMaxBurst = max(min_t(unsigned int, - epcd->bMaxBurst, 16U), 1U); - rpipe->descr.hwa_bDeviceInfoIndex = - wusb_port_no_to_idx(urb->dev->portnum); - /* FIXME: use maximum speed as supported or recommended by device */ - rpipe->descr.bSpeed = usb_pipeendpoint(urb->pipe) == 0 ? - UWB_PHY_RATE_53 : UWB_PHY_RATE_200; - - dev_dbg(dev, "addr %u (0x%02x) rpipe #%u ep# %u speed %d\n", - urb->dev->devnum, urb->dev->devnum | unauth, - le16_to_cpu(rpipe->descr.wRPipeIndex), - usb_pipeendpoint(urb->pipe), rpipe->descr.bSpeed); - - rpipe->descr.hwa_reserved = 0; - - rpipe->descr.bEndpointAddress = ep->desc.bEndpointAddress; - /* FIXME: bDataSequence */ - rpipe->descr.bDataSequence = 0; - - /* start with base window of hwa_bMaxBurst bits starting at 0. */ - ack_window = 0xFFFFFFFF >> (32 - rpipe->descr.hwa_bMaxBurst); - rpipe->descr.dwCurrentWindow = cpu_to_le32(ack_window); - epcd_max_sequence = max(min_t(unsigned int, - epcd->bMaxSequence, 32U), 2U); - rpipe->descr.bMaxDataSequence = epcd_max_sequence - 1; - rpipe->descr.bInterval = ep->desc.bInterval; - if (usb_endpoint_xfer_isoc(&ep->desc)) - rpipe->descr.bOverTheAirInterval = epcd->bOverTheAirInterval; - else - rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */ - /* FIXME: xmit power & preamble blah blah */ - rpipe->descr.bmAttribute = (ep->desc.bmAttributes & - USB_ENDPOINT_XFERTYPE_MASK); - /* rpipe->descr.bmCharacteristics RO */ - rpipe->descr.bmRetryOptions = (wa->wusb->retry_count & 0xF); - /* FIXME: use for assessing link quality? */ - rpipe->descr.wNumTransactionErrors = 0; - result = __rpipe_set_descr(wa, &rpipe->descr, - le16_to_cpu(rpipe->descr.wRPipeIndex)); - if (result < 0) { - dev_err(dev, "Cannot aim rpipe: %d\n", result); - goto error; - } - result = 0; -error: - return result; -} - -/* - * Check an aimed rpipe to make sure it points to where we want - * - * We use bit 19 of the Linux USB pipe bitmap for unauth vs auth - * space; when it is like that, we or 0x80 to make an unauth address. - */ -static int rpipe_check_aim(const struct wa_rpipe *rpipe, const struct wahc *wa, - const struct usb_host_endpoint *ep, - const struct urb *urb, gfp_t gfp) -{ - int result = 0; - struct device *dev = &wa->usb_iface->dev; - u8 portnum = wusb_port_no_to_idx(urb->dev->portnum); - -#define AIM_CHECK(rdf, val, text) \ - do { \ - if (rpipe->descr.rdf != (val)) { \ - dev_err(dev, \ - "rpipe aim discrepancy: " #rdf " " text "\n", \ - rpipe->descr.rdf, (val)); \ - result = -EINVAL; \ - WARN_ON(1); \ - } \ - } while (0) - AIM_CHECK(hwa_bDeviceInfoIndex, portnum, "(%u vs %u)"); - AIM_CHECK(bSpeed, usb_pipeendpoint(urb->pipe) == 0 ? - UWB_PHY_RATE_53 : UWB_PHY_RATE_200, - "(%u vs %u)"); - AIM_CHECK(bEndpointAddress, ep->desc.bEndpointAddress, "(%u vs %u)"); - AIM_CHECK(bInterval, ep->desc.bInterval, "(%u vs %u)"); - AIM_CHECK(bmAttribute, ep->desc.bmAttributes & 0x03, "(%u vs %u)"); -#undef AIM_CHECK - return result; -} - -#ifndef CONFIG_BUG -#define CONFIG_BUG 0 -#endif - -/* - * Make sure there is an rpipe allocated for an endpoint - * - * If already allocated, we just refcount it; if not, we get an - * idle one, aim it to the right location and take it. - * - * Attaches to ep->hcpriv and rpipe->ep to ep. - */ -int rpipe_get_by_ep(struct wahc *wa, struct usb_host_endpoint *ep, - struct urb *urb, gfp_t gfp) -{ - int result = 0; - struct device *dev = &wa->usb_iface->dev; - struct wa_rpipe *rpipe; - u8 eptype; - - mutex_lock(&wa->rpipe_mutex); - rpipe = ep->hcpriv; - if (rpipe != NULL) { - if (CONFIG_BUG == 1) { - result = rpipe_check_aim(rpipe, wa, ep, urb, gfp); - if (result < 0) - goto error; - } - __rpipe_get(rpipe); - dev_dbg(dev, "ep 0x%02x: reusing rpipe %u\n", - ep->desc.bEndpointAddress, - le16_to_cpu(rpipe->descr.wRPipeIndex)); - } else { - /* hmm, assign idle rpipe, aim it */ - result = -ENOBUFS; - eptype = ep->desc.bmAttributes & 0x03; - result = rpipe_get_idle(&rpipe, wa, 1 << eptype, gfp); - if (result < 0) - goto error; - result = rpipe_aim(rpipe, wa, ep, urb, gfp); - if (result < 0) { - rpipe_put(rpipe); - goto error; - } - ep->hcpriv = rpipe; - rpipe->ep = ep; - __rpipe_get(rpipe); /* for caching into ep->hcpriv */ - dev_dbg(dev, "ep 0x%02x: using rpipe %u\n", - ep->desc.bEndpointAddress, - le16_to_cpu(rpipe->descr.wRPipeIndex)); - } -error: - mutex_unlock(&wa->rpipe_mutex); - return result; -} - -/* - * Allocate the bitmap for each rpipe. - */ -int wa_rpipes_create(struct wahc *wa) -{ - wa->rpipes = le16_to_cpu(wa->wa_descr->wNumRPipes); - wa->rpipe_bm = bitmap_zalloc(wa->rpipes, GFP_KERNEL); - if (wa->rpipe_bm == NULL) - return -ENOMEM; - return 0; -} - -void wa_rpipes_destroy(struct wahc *wa) -{ - struct device *dev = &wa->usb_iface->dev; - - if (!bitmap_empty(wa->rpipe_bm, wa->rpipes)) { - WARN_ON(1); - dev_err(dev, "BUG: pipes not released on exit: %*pb\n", - wa->rpipes, wa->rpipe_bm); - } - bitmap_free(wa->rpipe_bm); -} - -/* - * Release resources allocated for an endpoint - * - * If there is an associated rpipe to this endpoint, Abort any pending - * transfers and put it. If the rpipe ends up being destroyed, - * __rpipe_destroy() will cleanup ep->hcpriv. - * - * This is called before calling hcd->stop(), so you don't need to do - * anything else in there. - */ -void rpipe_ep_disable(struct wahc *wa, struct usb_host_endpoint *ep) -{ - struct wa_rpipe *rpipe; - - mutex_lock(&wa->rpipe_mutex); - rpipe = ep->hcpriv; - if (rpipe != NULL) { - u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex); - - usb_control_msg( - wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_RPIPE_ABORT, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, - 0, index, NULL, 0, USB_CTRL_SET_TIMEOUT); - rpipe_put(rpipe); - } - mutex_unlock(&wa->rpipe_mutex); -} -EXPORT_SYMBOL_GPL(rpipe_ep_disable); - -/* Clear the stalled status of an RPIPE. */ -void rpipe_clear_feature_stalled(struct wahc *wa, struct usb_host_endpoint *ep) -{ - struct wa_rpipe *rpipe; - - mutex_lock(&wa->rpipe_mutex); - rpipe = ep->hcpriv; - if (rpipe != NULL) { - u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex); - - usb_control_msg( - wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), - USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, - RPIPE_STALL, index, NULL, 0, USB_CTRL_SET_TIMEOUT); - } - mutex_unlock(&wa->rpipe_mutex); -} -EXPORT_SYMBOL_GPL(rpipe_clear_feature_stalled); diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c deleted file mode 100644 index abf88cea37bb..000000000000 --- a/drivers/usb/wusbcore/wa-xfer.c +++ /dev/null @@ -1,2927 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WUSB Wire Adapter - * Data transfer and URB enqueing - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * How transfers work: get a buffer, break it up in segments (segment - * size is a multiple of the maxpacket size). For each segment issue a - * segment request (struct wa_xfer_*), then send the data buffer if - * out or nothing if in (all over the DTO endpoint). - * - * For each submitted segment request, a notification will come over - * the NEP endpoint and a transfer result (struct xfer_result) will - * arrive in the DTI URB. Read it, get the xfer ID, see if there is - * data coming (inbound transfer), schedule a read and handle it. - * - * Sounds simple, it is a pain to implement. - * - * - * ENTRY POINTS - * - * FIXME - * - * LIFE CYCLE / STATE DIAGRAM - * - * FIXME - * - * THIS CODE IS DISGUSTING - * - * Warned you are; it's my second try and still not happy with it. - * - * NOTES: - * - * - No iso - * - * - Supports DMA xfers, control, bulk and maybe interrupt - * - * - Does not recycle unused rpipes - * - * An rpipe is assigned to an endpoint the first time it is used, - * and then it's there, assigned, until the endpoint is disabled - * (destroyed [{h,d}wahc_op_ep_disable()]. The assignment of the - * rpipe to the endpoint is done under the wa->rpipe_sem semaphore - * (should be a mutex). - * - * Two methods it could be done: - * - * (a) set up a timer every time an rpipe's use count drops to 1 - * (which means unused) or when a transfer ends. Reset the - * timer when a xfer is queued. If the timer expires, release - * the rpipe [see rpipe_ep_disable()]. - * - * (b) when looking for free rpipes to attach [rpipe_get_by_ep()], - * when none are found go over the list, check their endpoint - * and their activity record (if no last-xfer-done-ts in the - * last x seconds) take it - * - * However, due to the fact that we have a set of limited - * resources (max-segments-at-the-same-time per xfer, - * xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end - * we are going to have to rebuild all this based on an scheduler, - * to where we have a list of transactions to do and based on the - * availability of the different required components (blocks, - * rpipes, segment slots, etc), we go scheduling them. Painful. - */ -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <linux/hash.h> -#include <linux/ratelimit.h> -#include <linux/export.h> -#include <linux/scatterlist.h> - -#include "wa-hc.h" -#include "wusbhc.h" - -enum { - /* [WUSB] section 8.3.3 allocates 7 bits for the segment index. */ - WA_SEGS_MAX = 128, -}; - -enum wa_seg_status { - WA_SEG_NOTREADY, - WA_SEG_READY, - WA_SEG_DELAYED, - WA_SEG_SUBMITTED, - WA_SEG_PENDING, - WA_SEG_DTI_PENDING, - WA_SEG_DONE, - WA_SEG_ERROR, - WA_SEG_ABORTED, -}; - -static void wa_xfer_delayed_run(struct wa_rpipe *); -static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting); - -/* - * Life cycle governed by 'struct urb' (the refcount of the struct is - * that of the 'struct urb' and usb_free_urb() would free the whole - * struct). - */ -struct wa_seg { - struct urb tr_urb; /* transfer request urb. */ - struct urb *isoc_pack_desc_urb; /* for isoc packet descriptor. */ - struct urb *dto_urb; /* for data output. */ - struct list_head list_node; /* for rpipe->req_list */ - struct wa_xfer *xfer; /* out xfer */ - u8 index; /* which segment we are */ - int isoc_frame_count; /* number of isoc frames in this segment. */ - int isoc_frame_offset; /* starting frame offset in the xfer URB. */ - /* Isoc frame that the current transfer buffer corresponds to. */ - int isoc_frame_index; - int isoc_size; /* size of all isoc frames sent by this seg. */ - enum wa_seg_status status; - ssize_t result; /* bytes xfered or error */ - struct wa_xfer_hdr xfer_hdr; -}; - -static inline void wa_seg_init(struct wa_seg *seg) -{ - usb_init_urb(&seg->tr_urb); - - /* set the remaining memory to 0. */ - memset(((void *)seg) + sizeof(seg->tr_urb), 0, - sizeof(*seg) - sizeof(seg->tr_urb)); -} - -/* - * Protected by xfer->lock - * - */ -struct wa_xfer { - struct kref refcnt; - struct list_head list_node; - spinlock_t lock; - u32 id; - - struct wahc *wa; /* Wire adapter we are plugged to */ - struct usb_host_endpoint *ep; - struct urb *urb; /* URB we are transferring for */ - struct wa_seg **seg; /* transfer segments */ - u8 segs, segs_submitted, segs_done; - unsigned is_inbound:1; - unsigned is_dma:1; - size_t seg_size; - int result; - - gfp_t gfp; /* allocation mask */ - - struct wusb_dev *wusb_dev; /* for activity timestamps */ -}; - -static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, - struct wa_seg *seg, int curr_iso_frame); -static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, - int starting_index, enum wa_seg_status status); - -static inline void wa_xfer_init(struct wa_xfer *xfer) -{ - kref_init(&xfer->refcnt); - INIT_LIST_HEAD(&xfer->list_node); - spin_lock_init(&xfer->lock); -} - -/* - * Destroy a transfer structure - * - * Note that freeing xfer->seg[cnt]->tr_urb will free the containing - * xfer->seg[cnt] memory that was allocated by __wa_xfer_setup_segs. - */ -static void wa_xfer_destroy(struct kref *_xfer) -{ - struct wa_xfer *xfer = container_of(_xfer, struct wa_xfer, refcnt); - if (xfer->seg) { - unsigned cnt; - for (cnt = 0; cnt < xfer->segs; cnt++) { - struct wa_seg *seg = xfer->seg[cnt]; - if (seg) { - usb_free_urb(seg->isoc_pack_desc_urb); - if (seg->dto_urb) { - kfree(seg->dto_urb->sg); - usb_free_urb(seg->dto_urb); - } - usb_free_urb(&seg->tr_urb); - } - } - kfree(xfer->seg); - } - kfree(xfer); -} - -static void wa_xfer_get(struct wa_xfer *xfer) -{ - kref_get(&xfer->refcnt); -} - -static void wa_xfer_put(struct wa_xfer *xfer) -{ - kref_put(&xfer->refcnt, wa_xfer_destroy); -} - -/* - * Try to get exclusive access to the DTO endpoint resource. Return true - * if successful. - */ -static inline int __wa_dto_try_get(struct wahc *wa) -{ - return (test_and_set_bit(0, &wa->dto_in_use) == 0); -} - -/* Release the DTO endpoint resource. */ -static inline void __wa_dto_put(struct wahc *wa) -{ - clear_bit_unlock(0, &wa->dto_in_use); -} - -/* Service RPIPEs that are waiting on the DTO resource. */ -static void wa_check_for_delayed_rpipes(struct wahc *wa) -{ - unsigned long flags; - int dto_waiting = 0; - struct wa_rpipe *rpipe; - - spin_lock_irqsave(&wa->rpipe_lock, flags); - while (!list_empty(&wa->rpipe_delayed_list) && !dto_waiting) { - rpipe = list_first_entry(&wa->rpipe_delayed_list, - struct wa_rpipe, list_node); - __wa_xfer_delayed_run(rpipe, &dto_waiting); - /* remove this RPIPE from the list if it is not waiting. */ - if (!dto_waiting) { - pr_debug("%s: RPIPE %d serviced and removed from delayed list.\n", - __func__, - le16_to_cpu(rpipe->descr.wRPipeIndex)); - list_del_init(&rpipe->list_node); - } - } - spin_unlock_irqrestore(&wa->rpipe_lock, flags); -} - -/* add this RPIPE to the end of the delayed RPIPE list. */ -static void wa_add_delayed_rpipe(struct wahc *wa, struct wa_rpipe *rpipe) -{ - unsigned long flags; - - spin_lock_irqsave(&wa->rpipe_lock, flags); - /* add rpipe to the list if it is not already on it. */ - if (list_empty(&rpipe->list_node)) { - pr_debug("%s: adding RPIPE %d to the delayed list.\n", - __func__, le16_to_cpu(rpipe->descr.wRPipeIndex)); - list_add_tail(&rpipe->list_node, &wa->rpipe_delayed_list); - } - spin_unlock_irqrestore(&wa->rpipe_lock, flags); -} - -/* - * xfer is referenced - * - * xfer->lock has to be unlocked - * - * We take xfer->lock for setting the result; this is a barrier - * against drivers/usb/core/hcd.c:unlink1() being called after we call - * usb_hcd_giveback_urb() and wa_urb_dequeue() trying to get a - * reference to the transfer. - */ -static void wa_xfer_giveback(struct wa_xfer *xfer) -{ - unsigned long flags; - - spin_lock_irqsave(&xfer->wa->xfer_list_lock, flags); - list_del_init(&xfer->list_node); - usb_hcd_unlink_urb_from_ep(&(xfer->wa->wusb->usb_hcd), xfer->urb); - spin_unlock_irqrestore(&xfer->wa->xfer_list_lock, flags); - /* FIXME: segmentation broken -- kills DWA */ - wusbhc_giveback_urb(xfer->wa->wusb, xfer->urb, xfer->result); - wa_put(xfer->wa); - wa_xfer_put(xfer); -} - -/* - * xfer is referenced - * - * xfer->lock has to be unlocked - */ -static void wa_xfer_completion(struct wa_xfer *xfer) -{ - if (xfer->wusb_dev) - wusb_dev_put(xfer->wusb_dev); - rpipe_put(xfer->ep->hcpriv); - wa_xfer_giveback(xfer); -} - -/* - * Initialize a transfer's ID - * - * We need to use a sequential number; if we use the pointer or the - * hash of the pointer, it can repeat over sequential transfers and - * then it will confuse the HWA....wonder why in hell they put a 32 - * bit handle in there then. - */ -static void wa_xfer_id_init(struct wa_xfer *xfer) -{ - xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count); -} - -/* Return the xfer's ID. */ -static inline u32 wa_xfer_id(struct wa_xfer *xfer) -{ - return xfer->id; -} - -/* Return the xfer's ID in transport format (little endian). */ -static inline __le32 wa_xfer_id_le32(struct wa_xfer *xfer) -{ - return cpu_to_le32(xfer->id); -} - -/* - * If transfer is done, wrap it up and return true - * - * xfer->lock has to be locked - */ -static unsigned __wa_xfer_is_done(struct wa_xfer *xfer) -{ - struct device *dev = &xfer->wa->usb_iface->dev; - unsigned result, cnt; - struct wa_seg *seg; - struct urb *urb = xfer->urb; - unsigned found_short = 0; - - result = xfer->segs_done == xfer->segs_submitted; - if (result == 0) - goto out; - urb->actual_length = 0; - for (cnt = 0; cnt < xfer->segs; cnt++) { - seg = xfer->seg[cnt]; - switch (seg->status) { - case WA_SEG_DONE: - if (found_short && seg->result > 0) { - dev_dbg(dev, "xfer %p ID %08X#%u: bad short segments (%zu)\n", - xfer, wa_xfer_id(xfer), cnt, - seg->result); - urb->status = -EINVAL; - goto out; - } - urb->actual_length += seg->result; - if (!(usb_pipeisoc(xfer->urb->pipe)) - && seg->result < xfer->seg_size - && cnt != xfer->segs-1) - found_short = 1; - dev_dbg(dev, "xfer %p ID %08X#%u: DONE short %d " - "result %zu urb->actual_length %d\n", - xfer, wa_xfer_id(xfer), seg->index, found_short, - seg->result, urb->actual_length); - break; - case WA_SEG_ERROR: - xfer->result = seg->result; - dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zi(0x%08zX)\n", - xfer, wa_xfer_id(xfer), seg->index, seg->result, - seg->result); - goto out; - case WA_SEG_ABORTED: - xfer->result = seg->result; - dev_dbg(dev, "xfer %p ID %08X#%u: ABORTED result %zi(0x%08zX)\n", - xfer, wa_xfer_id(xfer), seg->index, seg->result, - seg->result); - goto out; - default: - dev_warn(dev, "xfer %p ID %08X#%u: is_done bad state %d\n", - xfer, wa_xfer_id(xfer), cnt, seg->status); - xfer->result = -EINVAL; - goto out; - } - } - xfer->result = 0; -out: - return result; -} - -/* - * Mark the given segment as done. Return true if this completes the xfer. - * This should only be called for segs that have been submitted to an RPIPE. - * Delayed segs are not marked as submitted so they do not need to be marked - * as done when cleaning up. - * - * xfer->lock has to be locked - */ -static unsigned __wa_xfer_mark_seg_as_done(struct wa_xfer *xfer, - struct wa_seg *seg, enum wa_seg_status status) -{ - seg->status = status; - xfer->segs_done++; - - /* check for done. */ - return __wa_xfer_is_done(xfer); -} - -/* - * Search for a transfer list ID on the HCD's URB list - * - * For 32 bit architectures, we use the pointer itself; for 64 bits, a - * 32-bit hash of the pointer. - * - * @returns NULL if not found. - */ -static struct wa_xfer *wa_xfer_get_by_id(struct wahc *wa, u32 id) -{ - unsigned long flags; - struct wa_xfer *xfer_itr; - spin_lock_irqsave(&wa->xfer_list_lock, flags); - list_for_each_entry(xfer_itr, &wa->xfer_list, list_node) { - if (id == xfer_itr->id) { - wa_xfer_get(xfer_itr); - goto out; - } - } - xfer_itr = NULL; -out: - spin_unlock_irqrestore(&wa->xfer_list_lock, flags); - return xfer_itr; -} - -struct wa_xfer_abort_buffer { - struct urb urb; - struct wahc *wa; - struct wa_xfer_abort cmd; -}; - -static void __wa_xfer_abort_cb(struct urb *urb) -{ - struct wa_xfer_abort_buffer *b = urb->context; - struct wahc *wa = b->wa; - - /* - * If the abort request URB failed, then the HWA did not get the abort - * command. Forcibly clean up the xfer without waiting for a Transfer - * Result from the HWA. - */ - if (urb->status < 0) { - struct wa_xfer *xfer; - struct device *dev = &wa->usb_iface->dev; - - xfer = wa_xfer_get_by_id(wa, le32_to_cpu(b->cmd.dwTransferID)); - dev_err(dev, "%s: Transfer Abort request failed. result: %d\n", - __func__, urb->status); - if (xfer) { - unsigned long flags; - int done, seg_index = 0; - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - - dev_err(dev, "%s: cleaning up xfer %p ID 0x%08X.\n", - __func__, xfer, wa_xfer_id(xfer)); - spin_lock_irqsave(&xfer->lock, flags); - /* skip done segs. */ - while (seg_index < xfer->segs) { - struct wa_seg *seg = xfer->seg[seg_index]; - - if ((seg->status == WA_SEG_DONE) || - (seg->status == WA_SEG_ERROR)) { - ++seg_index; - } else { - break; - } - } - /* mark remaining segs as aborted. */ - wa_complete_remaining_xfer_segs(xfer, seg_index, - WA_SEG_ABORTED); - done = __wa_xfer_is_done(xfer); - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - wa_xfer_delayed_run(rpipe); - wa_xfer_put(xfer); - } else { - dev_err(dev, "%s: xfer ID 0x%08X already gone.\n", - __func__, le32_to_cpu(b->cmd.dwTransferID)); - } - } - - wa_put(wa); /* taken in __wa_xfer_abort */ - usb_put_urb(&b->urb); -} - -/* - * Aborts an ongoing transaction - * - * Assumes the transfer is referenced and locked and in a submitted - * state (mainly that there is an endpoint/rpipe assigned). - * - * The callback (see above) does nothing but freeing up the data by - * putting the URB. Because the URB is allocated at the head of the - * struct, the whole space we allocated is kfreed. * - */ -static int __wa_xfer_abort(struct wa_xfer *xfer) -{ - int result = -ENOMEM; - struct device *dev = &xfer->wa->usb_iface->dev; - struct wa_xfer_abort_buffer *b; - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - - b = kmalloc(sizeof(*b), GFP_ATOMIC); - if (b == NULL) - goto error_kmalloc; - b->cmd.bLength = sizeof(b->cmd); - b->cmd.bRequestType = WA_XFER_ABORT; - b->cmd.wRPipe = rpipe->descr.wRPipeIndex; - b->cmd.dwTransferID = wa_xfer_id_le32(xfer); - b->wa = wa_get(xfer->wa); - - usb_init_urb(&b->urb); - usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev, - usb_sndbulkpipe(xfer->wa->usb_dev, - xfer->wa->dto_epd->bEndpointAddress), - &b->cmd, sizeof(b->cmd), __wa_xfer_abort_cb, b); - result = usb_submit_urb(&b->urb, GFP_ATOMIC); - if (result < 0) - goto error_submit; - return result; /* callback frees! */ - - -error_submit: - wa_put(xfer->wa); - if (printk_ratelimit()) - dev_err(dev, "xfer %p: Can't submit abort request: %d\n", - xfer, result); - kfree(b); -error_kmalloc: - return result; - -} - -/* - * Calculate the number of isoc frames starting from isoc_frame_offset - * that will fit a in transfer segment. - */ -static int __wa_seg_calculate_isoc_frame_count(struct wa_xfer *xfer, - int isoc_frame_offset, int *total_size) -{ - int segment_size = 0, frame_count = 0; - int index = isoc_frame_offset; - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; - - while ((index < xfer->urb->number_of_packets) - && ((segment_size + iso_frame_desc[index].length) - <= xfer->seg_size)) { - /* - * For Alereon HWA devices, only include an isoc frame in an - * out segment if it is physically contiguous with the previous - * frame. This is required because those devices expect - * the isoc frames to be sent as a single USB transaction as - * opposed to one transaction per frame with standard HWA. - */ - if ((xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) - && (xfer->is_inbound == 0) - && (index > isoc_frame_offset) - && ((iso_frame_desc[index - 1].offset + - iso_frame_desc[index - 1].length) != - iso_frame_desc[index].offset)) - break; - - /* this frame fits. count it. */ - ++frame_count; - segment_size += iso_frame_desc[index].length; - - /* move to the next isoc frame. */ - ++index; - } - - *total_size = segment_size; - return frame_count; -} - -/* - * - * @returns < 0 on error, transfer segment request size if ok - */ -static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer, - enum wa_xfer_type *pxfer_type) -{ - ssize_t result; - struct device *dev = &xfer->wa->usb_iface->dev; - size_t maxpktsize; - struct urb *urb = xfer->urb; - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - - switch (rpipe->descr.bmAttribute & 0x3) { - case USB_ENDPOINT_XFER_CONTROL: - *pxfer_type = WA_XFER_TYPE_CTL; - result = sizeof(struct wa_xfer_ctl); - break; - case USB_ENDPOINT_XFER_INT: - case USB_ENDPOINT_XFER_BULK: - *pxfer_type = WA_XFER_TYPE_BI; - result = sizeof(struct wa_xfer_bi); - break; - case USB_ENDPOINT_XFER_ISOC: - *pxfer_type = WA_XFER_TYPE_ISO; - result = sizeof(struct wa_xfer_hwaiso); - break; - default: - /* never happens */ - BUG(); - result = -EINVAL; /* shut gcc up */ - } - xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0; - xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0; - - maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize); - xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks) - * 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1); - /* Compute the segment size and make sure it is a multiple of - * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of - * a check (FIXME) */ - if (xfer->seg_size < maxpktsize) { - dev_err(dev, - "HW BUG? seg_size %zu smaller than maxpktsize %zu\n", - xfer->seg_size, maxpktsize); - result = -EINVAL; - goto error; - } - xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize; - if ((rpipe->descr.bmAttribute & 0x3) == USB_ENDPOINT_XFER_ISOC) { - int index = 0; - - xfer->segs = 0; - /* - * loop over urb->number_of_packets to determine how many - * xfer segments will be needed to send the isoc frames. - */ - while (index < urb->number_of_packets) { - int seg_size; /* don't care. */ - index += __wa_seg_calculate_isoc_frame_count(xfer, - index, &seg_size); - ++xfer->segs; - } - } else { - xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length, - xfer->seg_size); - if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL) - xfer->segs = 1; - } - - if (xfer->segs > WA_SEGS_MAX) { - dev_err(dev, "BUG? oops, number of segments %zu bigger than %d\n", - (urb->transfer_buffer_length/xfer->seg_size), - WA_SEGS_MAX); - result = -EINVAL; - goto error; - } -error: - return result; -} - -static void __wa_setup_isoc_packet_descr( - struct wa_xfer_packet_info_hwaiso *packet_desc, - struct wa_xfer *xfer, - struct wa_seg *seg) { - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; - int frame_index; - - /* populate isoc packet descriptor. */ - packet_desc->bPacketType = WA_XFER_ISO_PACKET_INFO; - packet_desc->wLength = cpu_to_le16(struct_size(packet_desc, - PacketLength, - seg->isoc_frame_count)); - for (frame_index = 0; frame_index < seg->isoc_frame_count; - ++frame_index) { - int offset_index = frame_index + seg->isoc_frame_offset; - packet_desc->PacketLength[frame_index] = - cpu_to_le16(iso_frame_desc[offset_index].length); - } -} - - -/* Fill in the common request header and xfer-type specific data. */ -static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, - struct wa_xfer_hdr *xfer_hdr0, - enum wa_xfer_type xfer_type, - size_t xfer_hdr_size) -{ - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - struct wa_seg *seg = xfer->seg[0]; - - xfer_hdr0 = &seg->xfer_hdr; - xfer_hdr0->bLength = xfer_hdr_size; - xfer_hdr0->bRequestType = xfer_type; - xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex; - xfer_hdr0->dwTransferID = wa_xfer_id_le32(xfer); - xfer_hdr0->bTransferSegment = 0; - switch (xfer_type) { - case WA_XFER_TYPE_CTL: { - struct wa_xfer_ctl *xfer_ctl = - container_of(xfer_hdr0, struct wa_xfer_ctl, hdr); - xfer_ctl->bmAttribute = xfer->is_inbound ? 1 : 0; - memcpy(&xfer_ctl->baSetupData, xfer->urb->setup_packet, - sizeof(xfer_ctl->baSetupData)); - break; - } - case WA_XFER_TYPE_BI: - break; - case WA_XFER_TYPE_ISO: { - struct wa_xfer_hwaiso *xfer_iso = - container_of(xfer_hdr0, struct wa_xfer_hwaiso, hdr); - struct wa_xfer_packet_info_hwaiso *packet_desc = - ((void *)xfer_iso) + xfer_hdr_size; - - /* populate the isoc section of the transfer request. */ - xfer_iso->dwNumOfPackets = cpu_to_le32(seg->isoc_frame_count); - /* populate isoc packet descriptor. */ - __wa_setup_isoc_packet_descr(packet_desc, xfer, seg); - break; - } - default: - BUG(); - }; -} - -/* - * Callback for the OUT data phase of the segment request - * - * Check wa_seg_tr_cb(); most comments also apply here because this - * function does almost the same thing and they work closely - * together. - * - * If the seg request has failed but this DTO phase has succeeded, - * wa_seg_tr_cb() has already failed the segment and moved the - * status to WA_SEG_ERROR, so this will go through 'case 0' and - * effectively do nothing. - */ -static void wa_seg_dto_cb(struct urb *urb) -{ - struct wa_seg *seg = urb->context; - struct wa_xfer *xfer = seg->xfer; - struct wahc *wa; - struct device *dev; - struct wa_rpipe *rpipe; - unsigned long flags; - unsigned rpipe_ready = 0; - int data_send_done = 1, release_dto = 0, holding_dto = 0; - u8 done = 0; - int result; - - /* free the sg if it was used. */ - kfree(urb->sg); - urb->sg = NULL; - - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - if (usb_pipeisoc(xfer->urb->pipe)) { - /* Alereon HWA sends all isoc frames in a single transfer. */ - if (wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) - seg->isoc_frame_index += seg->isoc_frame_count; - else - seg->isoc_frame_index += 1; - if (seg->isoc_frame_index < seg->isoc_frame_count) { - data_send_done = 0; - holding_dto = 1; /* checked in error cases. */ - /* - * if this is the last isoc frame of the segment, we - * can release DTO after sending this frame. - */ - if ((seg->isoc_frame_index + 1) >= - seg->isoc_frame_count) - release_dto = 1; - } - dev_dbg(dev, "xfer 0x%08X#%u: isoc frame = %d, holding_dto = %d, release_dto = %d.\n", - wa_xfer_id(xfer), seg->index, seg->isoc_frame_index, - holding_dto, release_dto); - } - spin_unlock_irqrestore(&xfer->lock, flags); - - switch (urb->status) { - case 0: - spin_lock_irqsave(&xfer->lock, flags); - seg->result += urb->actual_length; - if (data_send_done) { - dev_dbg(dev, "xfer 0x%08X#%u: data out done (%zu bytes)\n", - wa_xfer_id(xfer), seg->index, seg->result); - if (seg->status < WA_SEG_PENDING) - seg->status = WA_SEG_PENDING; - } else { - /* should only hit this for isoc xfers. */ - /* - * Populate the dto URB with the next isoc frame buffer, - * send the URB and release DTO if we no longer need it. - */ - __wa_populate_dto_urb_isoc(xfer, seg, - seg->isoc_frame_offset + seg->isoc_frame_index); - - /* resubmit the URB with the next isoc frame. */ - /* take a ref on resubmit. */ - wa_xfer_get(xfer); - result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "xfer 0x%08X#%u: DTO submit failed: %d\n", - wa_xfer_id(xfer), seg->index, result); - spin_unlock_irqrestore(&xfer->lock, flags); - goto error_dto_submit; - } - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (release_dto) { - __wa_dto_put(wa); - wa_check_for_delayed_rpipes(wa); - } - break; - case -ECONNRESET: /* URB unlinked; no need to do anything */ - case -ENOENT: /* as it was done by the who unlinked us */ - if (holding_dto) { - __wa_dto_put(wa); - wa_check_for_delayed_rpipes(wa); - } - break; - default: /* Other errors ... */ - dev_err(dev, "xfer 0x%08X#%u: data out error %d\n", - wa_xfer_id(xfer), seg->index, urb->status); - goto error_default; - } - - /* taken when this URB was submitted. */ - wa_xfer_put(xfer); - return; - -error_dto_submit: - /* taken on resubmit attempt. */ - wa_xfer_put(xfer); -error_default: - spin_lock_irqsave(&xfer->lock, flags); - rpipe = xfer->ep->hcpriv; - if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)){ - dev_err(dev, "DTO: URB max acceptable errors exceeded, resetting device\n"); - wa_reset_all(wa); - } - if (seg->status != WA_SEG_ERROR) { - seg->result = urb->status; - __wa_xfer_abort(xfer); - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR); - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (holding_dto) { - __wa_dto_put(wa); - wa_check_for_delayed_rpipes(wa); - } - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - /* taken when this URB was submitted. */ - wa_xfer_put(xfer); -} - -/* - * Callback for the isoc packet descriptor phase of the segment request - * - * Check wa_seg_tr_cb(); most comments also apply here because this - * function does almost the same thing and they work closely - * together. - * - * If the seg request has failed but this phase has succeeded, - * wa_seg_tr_cb() has already failed the segment and moved the - * status to WA_SEG_ERROR, so this will go through 'case 0' and - * effectively do nothing. - */ -static void wa_seg_iso_pack_desc_cb(struct urb *urb) -{ - struct wa_seg *seg = urb->context; - struct wa_xfer *xfer = seg->xfer; - struct wahc *wa; - struct device *dev; - struct wa_rpipe *rpipe; - unsigned long flags; - unsigned rpipe_ready = 0; - u8 done = 0; - - switch (urb->status) { - case 0: - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - dev_dbg(dev, "iso xfer %08X#%u: packet descriptor done\n", - wa_xfer_id(xfer), seg->index); - if (xfer->is_inbound && seg->status < WA_SEG_PENDING) - seg->status = WA_SEG_PENDING; - spin_unlock_irqrestore(&xfer->lock, flags); - break; - case -ECONNRESET: /* URB unlinked; no need to do anything */ - case -ENOENT: /* as it was done by the who unlinked us */ - break; - default: /* Other errors ... */ - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - rpipe = xfer->ep->hcpriv; - pr_err_ratelimited("iso xfer %08X#%u: packet descriptor error %d\n", - wa_xfer_id(xfer), seg->index, urb->status); - if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)){ - dev_err(dev, "iso xfer: URB max acceptable errors exceeded, resetting device\n"); - wa_reset_all(wa); - } - if (seg->status != WA_SEG_ERROR) { - usb_unlink_urb(seg->dto_urb); - seg->result = urb->status; - __wa_xfer_abort(xfer); - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, - WA_SEG_ERROR); - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - } - /* taken when this URB was submitted. */ - wa_xfer_put(xfer); -} - -/* - * Callback for the segment request - * - * If successful transition state (unless already transitioned or - * outbound transfer); otherwise, take a note of the error, mark this - * segment done and try completion. - * - * Note we don't access until we are sure that the transfer hasn't - * been cancelled (ECONNRESET, ENOENT), which could mean that - * seg->xfer could be already gone. - * - * We have to check before setting the status to WA_SEG_PENDING - * because sometimes the xfer result callback arrives before this - * callback (geeeeeeze), so it might happen that we are already in - * another state. As well, we don't set it if the transfer is not inbound, - * as in that case, wa_seg_dto_cb will do it when the OUT data phase - * finishes. - */ -static void wa_seg_tr_cb(struct urb *urb) -{ - struct wa_seg *seg = urb->context; - struct wa_xfer *xfer = seg->xfer; - struct wahc *wa; - struct device *dev; - struct wa_rpipe *rpipe; - unsigned long flags; - unsigned rpipe_ready; - u8 done = 0; - - switch (urb->status) { - case 0: - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - dev_dbg(dev, "xfer %p ID 0x%08X#%u: request done\n", - xfer, wa_xfer_id(xfer), seg->index); - if (xfer->is_inbound && - seg->status < WA_SEG_PENDING && - !(usb_pipeisoc(xfer->urb->pipe))) - seg->status = WA_SEG_PENDING; - spin_unlock_irqrestore(&xfer->lock, flags); - break; - case -ECONNRESET: /* URB unlinked; no need to do anything */ - case -ENOENT: /* as it was done by the who unlinked us */ - break; - default: /* Other errors ... */ - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - rpipe = xfer->ep->hcpriv; - if (printk_ratelimit()) - dev_err(dev, "xfer %p ID 0x%08X#%u: request error %d\n", - xfer, wa_xfer_id(xfer), seg->index, - urb->status); - if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)){ - dev_err(dev, "DTO: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - } - usb_unlink_urb(seg->isoc_pack_desc_urb); - usb_unlink_urb(seg->dto_urb); - seg->result = urb->status; - __wa_xfer_abort(xfer); - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR); - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - } - /* taken when this URB was submitted. */ - wa_xfer_put(xfer); -} - -/* - * Allocate an SG list to store bytes_to_transfer bytes and copy the - * subset of the in_sg that matches the buffer subset - * we are about to transfer. - */ -static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg, - const unsigned int bytes_transferred, - const unsigned int bytes_to_transfer, int *out_num_sgs) -{ - struct scatterlist *out_sg; - unsigned int bytes_processed = 0, offset_into_current_page_data = 0, - nents; - struct scatterlist *current_xfer_sg = in_sg; - struct scatterlist *current_seg_sg, *last_seg_sg; - - /* skip previously transferred pages. */ - while ((current_xfer_sg) && - (bytes_processed < bytes_transferred)) { - bytes_processed += current_xfer_sg->length; - - /* advance the sg if current segment starts on or past the - next page. */ - if (bytes_processed <= bytes_transferred) - current_xfer_sg = sg_next(current_xfer_sg); - } - - /* the data for the current segment starts in current_xfer_sg. - calculate the offset. */ - if (bytes_processed > bytes_transferred) { - offset_into_current_page_data = current_xfer_sg->length - - (bytes_processed - bytes_transferred); - } - - /* calculate the number of pages needed by this segment. */ - nents = DIV_ROUND_UP((bytes_to_transfer + - offset_into_current_page_data + - current_xfer_sg->offset), - PAGE_SIZE); - - out_sg = kmalloc((sizeof(struct scatterlist) * nents), GFP_ATOMIC); - if (out_sg) { - sg_init_table(out_sg, nents); - - /* copy the portion of the incoming SG that correlates to the - * data to be transferred by this segment to the segment SG. */ - last_seg_sg = current_seg_sg = out_sg; - bytes_processed = 0; - - /* reset nents and calculate the actual number of sg entries - needed. */ - nents = 0; - while ((bytes_processed < bytes_to_transfer) && - current_seg_sg && current_xfer_sg) { - unsigned int page_len = min((current_xfer_sg->length - - offset_into_current_page_data), - (bytes_to_transfer - bytes_processed)); - - sg_set_page(current_seg_sg, sg_page(current_xfer_sg), - page_len, - current_xfer_sg->offset + - offset_into_current_page_data); - - bytes_processed += page_len; - - last_seg_sg = current_seg_sg; - current_seg_sg = sg_next(current_seg_sg); - current_xfer_sg = sg_next(current_xfer_sg); - - /* only the first page may require additional offset. */ - offset_into_current_page_data = 0; - nents++; - } - - /* update num_sgs and terminate the list since we may have - * concatenated pages. */ - sg_mark_end(last_seg_sg); - *out_num_sgs = nents; - } - - return out_sg; -} - -/* - * Populate DMA buffer info for the isoc dto urb. - */ -static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, - struct wa_seg *seg, int curr_iso_frame) -{ - seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - seg->dto_urb->sg = NULL; - seg->dto_urb->num_sgs = 0; - /* dto urb buffer address pulled from iso_frame_desc. */ - seg->dto_urb->transfer_dma = xfer->urb->transfer_dma + - xfer->urb->iso_frame_desc[curr_iso_frame].offset; - /* The Alereon HWA sends a single URB with all isoc segs. */ - if (xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) - seg->dto_urb->transfer_buffer_length = seg->isoc_size; - else - seg->dto_urb->transfer_buffer_length = - xfer->urb->iso_frame_desc[curr_iso_frame].length; -} - -/* - * Populate buffer ptr and size, DMA buffer or SG list for the dto urb. - */ -static int __wa_populate_dto_urb(struct wa_xfer *xfer, - struct wa_seg *seg, size_t buf_itr_offset, size_t buf_itr_size) -{ - int result = 0; - - if (xfer->is_dma) { - seg->dto_urb->transfer_dma = - xfer->urb->transfer_dma + buf_itr_offset; - seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - seg->dto_urb->sg = NULL; - seg->dto_urb->num_sgs = 0; - } else { - /* do buffer or SG processing. */ - seg->dto_urb->transfer_flags &= - ~URB_NO_TRANSFER_DMA_MAP; - /* this should always be 0 before a resubmit. */ - seg->dto_urb->num_mapped_sgs = 0; - - if (xfer->urb->transfer_buffer) { - seg->dto_urb->transfer_buffer = - xfer->urb->transfer_buffer + - buf_itr_offset; - seg->dto_urb->sg = NULL; - seg->dto_urb->num_sgs = 0; - } else { - seg->dto_urb->transfer_buffer = NULL; - - /* - * allocate an SG list to store seg_size bytes - * and copy the subset of the xfer->urb->sg that - * matches the buffer subset we are about to - * read. - */ - seg->dto_urb->sg = wa_xfer_create_subset_sg( - xfer->urb->sg, - buf_itr_offset, buf_itr_size, - &(seg->dto_urb->num_sgs)); - if (!(seg->dto_urb->sg)) - result = -ENOMEM; - } - } - seg->dto_urb->transfer_buffer_length = buf_itr_size; - - return result; -} - -/* - * Allocate the segs array and initialize each of them - * - * The segments are freed by wa_xfer_destroy() when the xfer use count - * drops to zero; however, because each segment is given the same life - * cycle as the USB URB it contains, it is actually freed by - * usb_put_urb() on the contained USB URB (twisted, eh?). - */ -static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) -{ - int result, cnt, isoc_frame_offset = 0; - size_t alloc_size = sizeof(*xfer->seg[0]) - - sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size; - struct usb_device *usb_dev = xfer->wa->usb_dev; - const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd; - struct wa_seg *seg; - size_t buf_itr, buf_size, buf_itr_size; - - result = -ENOMEM; - xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC); - if (xfer->seg == NULL) - goto error_segs_kzalloc; - buf_itr = 0; - buf_size = xfer->urb->transfer_buffer_length; - for (cnt = 0; cnt < xfer->segs; cnt++) { - size_t iso_pkt_descr_size = 0; - int seg_isoc_frame_count = 0, seg_isoc_size = 0; - - /* - * Adjust the size of the segment object to contain space for - * the isoc packet descriptor buffer. - */ - if (usb_pipeisoc(xfer->urb->pipe)) { - seg_isoc_frame_count = - __wa_seg_calculate_isoc_frame_count(xfer, - isoc_frame_offset, &seg_isoc_size); - - iso_pkt_descr_size = - sizeof(struct wa_xfer_packet_info_hwaiso) + - (seg_isoc_frame_count * sizeof(__le16)); - } - result = -ENOMEM; - seg = xfer->seg[cnt] = kmalloc(alloc_size + iso_pkt_descr_size, - GFP_ATOMIC); - if (seg == NULL) - goto error_seg_kmalloc; - wa_seg_init(seg); - seg->xfer = xfer; - seg->index = cnt; - usb_fill_bulk_urb(&seg->tr_urb, usb_dev, - usb_sndbulkpipe(usb_dev, - dto_epd->bEndpointAddress), - &seg->xfer_hdr, xfer_hdr_size, - wa_seg_tr_cb, seg); - buf_itr_size = min(buf_size, xfer->seg_size); - - if (usb_pipeisoc(xfer->urb->pipe)) { - seg->isoc_frame_count = seg_isoc_frame_count; - seg->isoc_frame_offset = isoc_frame_offset; - seg->isoc_size = seg_isoc_size; - /* iso packet descriptor. */ - seg->isoc_pack_desc_urb = - usb_alloc_urb(0, GFP_ATOMIC); - if (seg->isoc_pack_desc_urb == NULL) - goto error_iso_pack_desc_alloc; - /* - * The buffer for the isoc packet descriptor starts - * after the transfer request header in the - * segment object memory buffer. - */ - usb_fill_bulk_urb( - seg->isoc_pack_desc_urb, usb_dev, - usb_sndbulkpipe(usb_dev, - dto_epd->bEndpointAddress), - (void *)(&seg->xfer_hdr) + - xfer_hdr_size, - iso_pkt_descr_size, - wa_seg_iso_pack_desc_cb, seg); - - /* adjust starting frame offset for next seg. */ - isoc_frame_offset += seg_isoc_frame_count; - } - - if (xfer->is_inbound == 0 && buf_size > 0) { - /* outbound data. */ - seg->dto_urb = usb_alloc_urb(0, GFP_ATOMIC); - if (seg->dto_urb == NULL) - goto error_dto_alloc; - usb_fill_bulk_urb( - seg->dto_urb, usb_dev, - usb_sndbulkpipe(usb_dev, - dto_epd->bEndpointAddress), - NULL, 0, wa_seg_dto_cb, seg); - - if (usb_pipeisoc(xfer->urb->pipe)) { - /* - * Fill in the xfer buffer information for the - * first isoc frame. Subsequent frames in this - * segment will be filled in and sent from the - * DTO completion routine, if needed. - */ - __wa_populate_dto_urb_isoc(xfer, seg, - seg->isoc_frame_offset); - } else { - /* fill in the xfer buffer information. */ - result = __wa_populate_dto_urb(xfer, seg, - buf_itr, buf_itr_size); - if (result < 0) - goto error_seg_outbound_populate; - - buf_itr += buf_itr_size; - buf_size -= buf_itr_size; - } - } - seg->status = WA_SEG_READY; - } - return 0; - - /* - * Free the memory for the current segment which failed to init. - * Use the fact that cnt is left at were it failed. The remaining - * segments will be cleaned up by wa_xfer_destroy. - */ -error_seg_outbound_populate: - usb_free_urb(xfer->seg[cnt]->dto_urb); -error_dto_alloc: - usb_free_urb(xfer->seg[cnt]->isoc_pack_desc_urb); -error_iso_pack_desc_alloc: - kfree(xfer->seg[cnt]); - xfer->seg[cnt] = NULL; -error_seg_kmalloc: -error_segs_kzalloc: - return result; -} - -/* - * Allocates all the stuff needed to submit a transfer - * - * Breaks the whole data buffer in a list of segments, each one has a - * structure allocated to it and linked in xfer->seg[index] - * - * FIXME: merge setup_segs() and the last part of this function, no - * need to do two for loops when we could run everything in a - * single one - */ -static int __wa_xfer_setup(struct wa_xfer *xfer, struct urb *urb) -{ - int result; - struct device *dev = &xfer->wa->usb_iface->dev; - enum wa_xfer_type xfer_type = 0; /* shut up GCC */ - size_t xfer_hdr_size, cnt, transfer_size; - struct wa_xfer_hdr *xfer_hdr0, *xfer_hdr; - - result = __wa_xfer_setup_sizes(xfer, &xfer_type); - if (result < 0) - goto error_setup_sizes; - xfer_hdr_size = result; - result = __wa_xfer_setup_segs(xfer, xfer_hdr_size); - if (result < 0) { - dev_err(dev, "xfer %p: Failed to allocate %d segments: %d\n", - xfer, xfer->segs, result); - goto error_setup_segs; - } - /* Fill the first header */ - xfer_hdr0 = &xfer->seg[0]->xfer_hdr; - wa_xfer_id_init(xfer); - __wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size); - - /* Fill remaining headers */ - xfer_hdr = xfer_hdr0; - if (xfer_type == WA_XFER_TYPE_ISO) { - xfer_hdr0->dwTransferLength = - cpu_to_le32(xfer->seg[0]->isoc_size); - for (cnt = 1; cnt < xfer->segs; cnt++) { - struct wa_xfer_packet_info_hwaiso *packet_desc; - struct wa_seg *seg = xfer->seg[cnt]; - struct wa_xfer_hwaiso *xfer_iso; - - xfer_hdr = &seg->xfer_hdr; - xfer_iso = container_of(xfer_hdr, - struct wa_xfer_hwaiso, hdr); - packet_desc = ((void *)xfer_hdr) + xfer_hdr_size; - /* - * Copy values from the 0th header. Segment specific - * values are set below. - */ - memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); - xfer_hdr->bTransferSegment = cnt; - xfer_hdr->dwTransferLength = - cpu_to_le32(seg->isoc_size); - xfer_iso->dwNumOfPackets = - cpu_to_le32(seg->isoc_frame_count); - __wa_setup_isoc_packet_descr(packet_desc, xfer, seg); - seg->status = WA_SEG_READY; - } - } else { - transfer_size = urb->transfer_buffer_length; - xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ? - cpu_to_le32(xfer->seg_size) : - cpu_to_le32(transfer_size); - transfer_size -= xfer->seg_size; - for (cnt = 1; cnt < xfer->segs; cnt++) { - xfer_hdr = &xfer->seg[cnt]->xfer_hdr; - memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); - xfer_hdr->bTransferSegment = cnt; - xfer_hdr->dwTransferLength = - transfer_size > xfer->seg_size ? - cpu_to_le32(xfer->seg_size) - : cpu_to_le32(transfer_size); - xfer->seg[cnt]->status = WA_SEG_READY; - transfer_size -= xfer->seg_size; - } - } - xfer_hdr->bTransferSegment |= 0x80; /* this is the last segment */ - result = 0; -error_setup_segs: -error_setup_sizes: - return result; -} - -/* - * - * - * rpipe->seg_lock is held! - */ -static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, - struct wa_seg *seg, int *dto_done) -{ - int result; - - /* default to done unless we encounter a multi-frame isoc segment. */ - *dto_done = 1; - - /* - * Take a ref for each segment urb so the xfer cannot disappear until - * all of the callbacks run. - */ - wa_xfer_get(xfer); - /* submit the transfer request. */ - seg->status = WA_SEG_SUBMITTED; - result = usb_submit_urb(&seg->tr_urb, GFP_ATOMIC); - if (result < 0) { - pr_err("%s: xfer %p#%u: REQ submit failed: %d\n", - __func__, xfer, seg->index, result); - wa_xfer_put(xfer); - goto error_tr_submit; - } - /* submit the isoc packet descriptor if present. */ - if (seg->isoc_pack_desc_urb) { - wa_xfer_get(xfer); - result = usb_submit_urb(seg->isoc_pack_desc_urb, GFP_ATOMIC); - seg->isoc_frame_index = 0; - if (result < 0) { - pr_err("%s: xfer %p#%u: ISO packet descriptor submit failed: %d\n", - __func__, xfer, seg->index, result); - wa_xfer_put(xfer); - goto error_iso_pack_desc_submit; - } - } - /* submit the out data if this is an out request. */ - if (seg->dto_urb) { - struct wahc *wa = xfer->wa; - wa_xfer_get(xfer); - result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); - if (result < 0) { - pr_err("%s: xfer %p#%u: DTO submit failed: %d\n", - __func__, xfer, seg->index, result); - wa_xfer_put(xfer); - goto error_dto_submit; - } - /* - * If this segment contains more than one isoc frame, hold - * onto the dto resource until we send all frames. - * Only applies to non-Alereon devices. - */ - if (((wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) == 0) - && (seg->isoc_frame_count > 1)) - *dto_done = 0; - } - rpipe_avail_dec(rpipe); - return 0; - -error_dto_submit: - usb_unlink_urb(seg->isoc_pack_desc_urb); -error_iso_pack_desc_submit: - usb_unlink_urb(&seg->tr_urb); -error_tr_submit: - seg->status = WA_SEG_ERROR; - seg->result = result; - *dto_done = 1; - return result; -} - -/* - * Execute more queued request segments until the maximum concurrent allowed. - * Return true if the DTO resource was acquired and released. - * - * The ugly unlock/lock sequence on the error path is needed as the - * xfer->lock normally nests the seg_lock and not viceversa. - */ -static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting) -{ - int result, dto_acquired = 0, dto_done = 0; - struct device *dev = &rpipe->wa->usb_iface->dev; - struct wa_seg *seg; - struct wa_xfer *xfer; - unsigned long flags; - - *dto_waiting = 0; - - spin_lock_irqsave(&rpipe->seg_lock, flags); - while (atomic_read(&rpipe->segs_available) > 0 - && !list_empty(&rpipe->seg_list) - && (dto_acquired = __wa_dto_try_get(rpipe->wa))) { - seg = list_first_entry(&(rpipe->seg_list), struct wa_seg, - list_node); - list_del(&seg->list_node); - xfer = seg->xfer; - /* - * Get a reference to the xfer in case the callbacks for the - * URBs submitted by __wa_seg_submit attempt to complete - * the xfer before this function completes. - */ - wa_xfer_get(xfer); - result = __wa_seg_submit(rpipe, xfer, seg, &dto_done); - /* release the dto resource if this RPIPE is done with it. */ - if (dto_done) - __wa_dto_put(rpipe->wa); - dev_dbg(dev, "xfer %p ID %08X#%u submitted from delayed [%d segments available] %d\n", - xfer, wa_xfer_id(xfer), seg->index, - atomic_read(&rpipe->segs_available), result); - if (unlikely(result < 0)) { - int done; - - spin_unlock_irqrestore(&rpipe->seg_lock, flags); - spin_lock_irqsave(&xfer->lock, flags); - __wa_xfer_abort(xfer); - /* - * This seg was marked as submitted when it was put on - * the RPIPE seg_list. Mark it done. - */ - xfer->segs_done++; - done = __wa_xfer_is_done(xfer); - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - spin_lock_irqsave(&rpipe->seg_lock, flags); - } - wa_xfer_put(xfer); - } - /* - * Mark this RPIPE as waiting if dto was not acquired, there are - * delayed segs and no active transfers to wake us up later. - */ - if (!dto_acquired && !list_empty(&rpipe->seg_list) - && (atomic_read(&rpipe->segs_available) == - le16_to_cpu(rpipe->descr.wRequests))) - *dto_waiting = 1; - - spin_unlock_irqrestore(&rpipe->seg_lock, flags); - - return dto_done; -} - -static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) -{ - int dto_waiting; - int dto_done = __wa_xfer_delayed_run(rpipe, &dto_waiting); - - /* - * If this RPIPE is waiting on the DTO resource, add it to the tail of - * the waiting list. - * Otherwise, if the WA DTO resource was acquired and released by - * __wa_xfer_delayed_run, another RPIPE may have attempted to acquire - * DTO and failed during that time. Check the delayed list and process - * any waiters. Start searching from the next RPIPE index. - */ - if (dto_waiting) - wa_add_delayed_rpipe(rpipe->wa, rpipe); - else if (dto_done) - wa_check_for_delayed_rpipes(rpipe->wa); -} - -/* - * - * xfer->lock is taken - * - * On failure submitting we just stop submitting and return error; - * wa_urb_enqueue_b() will execute the completion path - */ -static int __wa_xfer_submit(struct wa_xfer *xfer) -{ - int result, dto_acquired = 0, dto_done = 0, dto_waiting = 0; - struct wahc *wa = xfer->wa; - struct device *dev = &wa->usb_iface->dev; - unsigned cnt; - struct wa_seg *seg; - unsigned long flags; - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - size_t maxrequests = le16_to_cpu(rpipe->descr.wRequests); - u8 available; - u8 empty; - - spin_lock_irqsave(&wa->xfer_list_lock, flags); - list_add_tail(&xfer->list_node, &wa->xfer_list); - spin_unlock_irqrestore(&wa->xfer_list_lock, flags); - - BUG_ON(atomic_read(&rpipe->segs_available) > maxrequests); - result = 0; - spin_lock_irqsave(&rpipe->seg_lock, flags); - for (cnt = 0; cnt < xfer->segs; cnt++) { - int delay_seg = 1; - - available = atomic_read(&rpipe->segs_available); - empty = list_empty(&rpipe->seg_list); - seg = xfer->seg[cnt]; - if (available && empty) { - /* - * Only attempt to acquire DTO if we have a segment - * to send. - */ - dto_acquired = __wa_dto_try_get(rpipe->wa); - if (dto_acquired) { - delay_seg = 0; - result = __wa_seg_submit(rpipe, xfer, seg, - &dto_done); - dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u submitted\n", - xfer, wa_xfer_id(xfer), cnt, available, - empty); - if (dto_done) - __wa_dto_put(rpipe->wa); - - if (result < 0) { - __wa_xfer_abort(xfer); - goto error_seg_submit; - } - } - } - - if (delay_seg) { - dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u delayed\n", - xfer, wa_xfer_id(xfer), cnt, available, empty); - seg->status = WA_SEG_DELAYED; - list_add_tail(&seg->list_node, &rpipe->seg_list); - } - xfer->segs_submitted++; - } -error_seg_submit: - /* - * Mark this RPIPE as waiting if dto was not acquired, there are - * delayed segs and no active transfers to wake us up later. - */ - if (!dto_acquired && !list_empty(&rpipe->seg_list) - && (atomic_read(&rpipe->segs_available) == - le16_to_cpu(rpipe->descr.wRequests))) - dto_waiting = 1; - spin_unlock_irqrestore(&rpipe->seg_lock, flags); - - if (dto_waiting) - wa_add_delayed_rpipe(rpipe->wa, rpipe); - else if (dto_done) - wa_check_for_delayed_rpipes(rpipe->wa); - - return result; -} - -/* - * Second part of a URB/transfer enqueuement - * - * Assumes this comes from wa_urb_enqueue() [maybe through - * wa_urb_enqueue_run()]. At this point: - * - * xfer->wa filled and refcounted - * xfer->ep filled with rpipe refcounted if - * delayed == 0 - * xfer->urb filled and refcounted (this is the case when called - * from wa_urb_enqueue() as we come from usb_submit_urb() - * and when called by wa_urb_enqueue_run(), as we took an - * extra ref dropped by _run() after we return). - * xfer->gfp filled - * - * If we fail at __wa_xfer_submit(), then we just check if we are done - * and if so, we run the completion procedure. However, if we are not - * yet done, we do nothing and wait for the completion handlers from - * the submitted URBs or from the xfer-result path to kick in. If xfer - * result never kicks in, the xfer will timeout from the USB code and - * dequeue() will be called. - */ -static int wa_urb_enqueue_b(struct wa_xfer *xfer) -{ - int result; - unsigned long flags; - struct urb *urb = xfer->urb; - struct wahc *wa = xfer->wa; - struct wusbhc *wusbhc = wa->wusb; - struct wusb_dev *wusb_dev; - unsigned done; - - result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp); - if (result < 0) { - pr_err("%s: error_rpipe_get\n", __func__); - goto error_rpipe_get; - } - result = -ENODEV; - /* FIXME: segmentation broken -- kills DWA */ - mutex_lock(&wusbhc->mutex); /* get a WUSB dev */ - if (urb->dev == NULL) { - mutex_unlock(&wusbhc->mutex); - pr_err("%s: error usb dev gone\n", __func__); - goto error_dev_gone; - } - wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); - if (wusb_dev == NULL) { - mutex_unlock(&wusbhc->mutex); - dev_err(&(urb->dev->dev), "%s: error wusb dev gone\n", - __func__); - goto error_dev_gone; - } - mutex_unlock(&wusbhc->mutex); - - spin_lock_irqsave(&xfer->lock, flags); - xfer->wusb_dev = wusb_dev; - result = urb->status; - if (urb->status != -EINPROGRESS) { - dev_err(&(urb->dev->dev), "%s: error_dequeued\n", __func__); - goto error_dequeued; - } - - result = __wa_xfer_setup(xfer, urb); - if (result < 0) { - dev_err(&(urb->dev->dev), "%s: error_xfer_setup\n", __func__); - goto error_xfer_setup; - } - /* - * Get a xfer reference since __wa_xfer_submit starts asynchronous - * operations that may try to complete the xfer before this function - * exits. - */ - wa_xfer_get(xfer); - result = __wa_xfer_submit(xfer); - if (result < 0) { - dev_err(&(urb->dev->dev), "%s: error_xfer_submit\n", __func__); - goto error_xfer_submit; - } - spin_unlock_irqrestore(&xfer->lock, flags); - wa_xfer_put(xfer); - return 0; - - /* - * this is basically wa_xfer_completion() broken up wa_xfer_giveback() - * does a wa_xfer_put() that will call wa_xfer_destroy() and undo - * setup(). - */ -error_xfer_setup: -error_dequeued: - spin_unlock_irqrestore(&xfer->lock, flags); - /* FIXME: segmentation broken, kills DWA */ - if (wusb_dev) - wusb_dev_put(wusb_dev); -error_dev_gone: - rpipe_put(xfer->ep->hcpriv); -error_rpipe_get: - xfer->result = result; - return result; - -error_xfer_submit: - done = __wa_xfer_is_done(xfer); - xfer->result = result; - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - wa_xfer_put(xfer); - /* return success since the completion routine will run. */ - return 0; -} - -/* - * Execute the delayed transfers in the Wire Adapter @wa - * - * We need to be careful here, as dequeue() could be called in the - * middle. That's why we do the whole thing under the - * wa->xfer_list_lock. If dequeue() jumps in, it first locks xfer->lock - * and then checks the list -- so as we would be acquiring in inverse - * order, we move the delayed list to a separate list while locked and then - * submit them without the list lock held. - */ -void wa_urb_enqueue_run(struct work_struct *ws) -{ - struct wahc *wa = container_of(ws, struct wahc, xfer_enqueue_work); - struct wa_xfer *xfer, *next; - struct urb *urb; - LIST_HEAD(tmp_list); - - /* Create a copy of the wa->xfer_delayed_list while holding the lock */ - spin_lock_irq(&wa->xfer_list_lock); - list_cut_position(&tmp_list, &wa->xfer_delayed_list, - wa->xfer_delayed_list.prev); - spin_unlock_irq(&wa->xfer_list_lock); - - /* - * enqueue from temp list without list lock held since wa_urb_enqueue_b - * can take xfer->lock as well as lock mutexes. - */ - list_for_each_entry_safe(xfer, next, &tmp_list, list_node) { - list_del_init(&xfer->list_node); - - urb = xfer->urb; - if (wa_urb_enqueue_b(xfer) < 0) - wa_xfer_giveback(xfer); - usb_put_urb(urb); /* taken when queuing */ - } -} -EXPORT_SYMBOL_GPL(wa_urb_enqueue_run); - -/* - * Process the errored transfers on the Wire Adapter outside of interrupt. - */ -void wa_process_errored_transfers_run(struct work_struct *ws) -{ - struct wahc *wa = container_of(ws, struct wahc, xfer_error_work); - struct wa_xfer *xfer, *next; - LIST_HEAD(tmp_list); - - pr_info("%s: Run delayed STALL processing.\n", __func__); - - /* Create a copy of the wa->xfer_errored_list while holding the lock */ - spin_lock_irq(&wa->xfer_list_lock); - list_cut_position(&tmp_list, &wa->xfer_errored_list, - wa->xfer_errored_list.prev); - spin_unlock_irq(&wa->xfer_list_lock); - - /* - * run rpipe_clear_feature_stalled from temp list without list lock - * held. - */ - list_for_each_entry_safe(xfer, next, &tmp_list, list_node) { - struct usb_host_endpoint *ep; - unsigned long flags; - struct wa_rpipe *rpipe; - - spin_lock_irqsave(&xfer->lock, flags); - ep = xfer->ep; - rpipe = ep->hcpriv; - spin_unlock_irqrestore(&xfer->lock, flags); - - /* clear RPIPE feature stalled without holding a lock. */ - rpipe_clear_feature_stalled(wa, ep); - - /* complete the xfer. This removes it from the tmp list. */ - wa_xfer_completion(xfer); - - /* check for work. */ - wa_xfer_delayed_run(rpipe); - } -} -EXPORT_SYMBOL_GPL(wa_process_errored_transfers_run); - -/* - * Submit a transfer to the Wire Adapter in a delayed way - * - * The process of enqueuing involves possible sleeps() [see - * enqueue_b(), for the rpipe_get() and the mutex_lock()]. If we are - * in an atomic section, we defer the enqueue_b() call--else we call direct. - * - * @urb: We own a reference to it done by the HCI Linux USB stack that - * will be given up by calling usb_hcd_giveback_urb() or by - * returning error from this function -> ergo we don't have to - * refcount it. - */ -int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep, - struct urb *urb, gfp_t gfp) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - struct wa_xfer *xfer; - unsigned long my_flags; - unsigned cant_sleep = irqs_disabled() | in_atomic(); - - if ((urb->transfer_buffer == NULL) - && (urb->sg == NULL) - && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) - && urb->transfer_buffer_length != 0) { - dev_err(dev, "BUG? urb %p: NULL xfer buffer & NODMA\n", urb); - dump_stack(); - } - - spin_lock_irqsave(&wa->xfer_list_lock, my_flags); - result = usb_hcd_link_urb_to_ep(&(wa->wusb->usb_hcd), urb); - spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); - if (result < 0) - goto error_link_urb; - - result = -ENOMEM; - xfer = kzalloc(sizeof(*xfer), gfp); - if (xfer == NULL) - goto error_kmalloc; - - result = -ENOENT; - if (urb->status != -EINPROGRESS) /* cancelled */ - goto error_dequeued; /* before starting? */ - wa_xfer_init(xfer); - xfer->wa = wa_get(wa); - xfer->urb = urb; - xfer->gfp = gfp; - xfer->ep = ep; - urb->hcpriv = xfer; - - dev_dbg(dev, "xfer %p urb %p pipe 0x%02x [%d bytes] %s %s %s\n", - xfer, urb, urb->pipe, urb->transfer_buffer_length, - urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? "dma" : "nodma", - urb->pipe & USB_DIR_IN ? "inbound" : "outbound", - cant_sleep ? "deferred" : "inline"); - - if (cant_sleep) { - usb_get_urb(urb); - spin_lock_irqsave(&wa->xfer_list_lock, my_flags); - list_add_tail(&xfer->list_node, &wa->xfer_delayed_list); - spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); - queue_work(wusbd, &wa->xfer_enqueue_work); - } else { - result = wa_urb_enqueue_b(xfer); - if (result < 0) { - /* - * URB submit/enqueue failed. Clean up, return an - * error and do not run the callback. This avoids - * an infinite submit/complete loop. - */ - dev_err(dev, "%s: URB enqueue failed: %d\n", - __func__, result); - wa_put(xfer->wa); - wa_xfer_put(xfer); - spin_lock_irqsave(&wa->xfer_list_lock, my_flags); - usb_hcd_unlink_urb_from_ep(&(wa->wusb->usb_hcd), urb); - spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); - return result; - } - } - return 0; - -error_dequeued: - kfree(xfer); -error_kmalloc: - spin_lock_irqsave(&wa->xfer_list_lock, my_flags); - usb_hcd_unlink_urb_from_ep(&(wa->wusb->usb_hcd), urb); - spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); -error_link_urb: - return result; -} -EXPORT_SYMBOL_GPL(wa_urb_enqueue); - -/* - * Dequeue a URB and make sure uwb_hcd_giveback_urb() [completion - * handler] is called. - * - * Until a transfer goes successfully through wa_urb_enqueue() it - * needs to be dequeued with completion calling; when stuck in delayed - * or before wa_xfer_setup() is called, we need to do completion. - * - * not setup If there is no hcpriv yet, that means that that enqueue - * still had no time to set the xfer up. Because - * urb->status should be other than -EINPROGRESS, - * enqueue() will catch that and bail out. - * - * If the transfer has gone through setup, we just need to clean it - * up. If it has gone through submit(), we have to abort it [with an - * asynch request] and then make sure we cancel each segment. - * - */ -int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status) -{ - unsigned long flags; - struct wa_xfer *xfer; - struct wa_seg *seg; - struct wa_rpipe *rpipe; - unsigned cnt, done = 0, xfer_abort_pending; - unsigned rpipe_ready = 0; - int result; - - /* check if it is safe to unlink. */ - spin_lock_irqsave(&wa->xfer_list_lock, flags); - result = usb_hcd_check_unlink_urb(&(wa->wusb->usb_hcd), urb, status); - if ((result == 0) && urb->hcpriv) { - /* - * Get a xfer ref to prevent a race with wa_xfer_giveback - * cleaning up the xfer while we are working with it. - */ - wa_xfer_get(urb->hcpriv); - } - spin_unlock_irqrestore(&wa->xfer_list_lock, flags); - if (result) - return result; - - xfer = urb->hcpriv; - if (xfer == NULL) - return -ENOENT; - spin_lock_irqsave(&xfer->lock, flags); - pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer)); - rpipe = xfer->ep->hcpriv; - if (rpipe == NULL) { - pr_debug("%s: xfer %p id 0x%08X has no RPIPE. %s", - __func__, xfer, wa_xfer_id(xfer), - "Probably already aborted.\n" ); - result = -ENOENT; - goto out_unlock; - } - /* - * Check for done to avoid racing with wa_xfer_giveback and completing - * twice. - */ - if (__wa_xfer_is_done(xfer)) { - pr_debug("%s: xfer %p id 0x%08X already done.\n", __func__, - xfer, wa_xfer_id(xfer)); - result = -ENOENT; - goto out_unlock; - } - /* Check the delayed list -> if there, release and complete */ - spin_lock(&wa->xfer_list_lock); - if (!list_empty(&xfer->list_node) && xfer->seg == NULL) - goto dequeue_delayed; - spin_unlock(&wa->xfer_list_lock); - if (xfer->seg == NULL) /* still hasn't reached */ - goto out_unlock; /* setup(), enqueue_b() completes */ - /* Ok, the xfer is in flight already, it's been setup and submitted.*/ - xfer_abort_pending = __wa_xfer_abort(xfer) >= 0; - /* - * grab the rpipe->seg_lock here to prevent racing with - * __wa_xfer_delayed_run. - */ - spin_lock(&rpipe->seg_lock); - for (cnt = 0; cnt < xfer->segs; cnt++) { - seg = xfer->seg[cnt]; - pr_debug("%s: xfer id 0x%08X#%d status = %d\n", - __func__, wa_xfer_id(xfer), cnt, seg->status); - switch (seg->status) { - case WA_SEG_NOTREADY: - case WA_SEG_READY: - printk(KERN_ERR "xfer %p#%u: dequeue bad state %u\n", - xfer, cnt, seg->status); - WARN_ON(1); - break; - case WA_SEG_DELAYED: - /* - * delete from rpipe delayed list. If no segments on - * this xfer have been submitted, __wa_xfer_is_done will - * trigger a giveback below. Otherwise, the submitted - * segments will be completed in the DTI interrupt. - */ - seg->status = WA_SEG_ABORTED; - seg->result = -ENOENT; - list_del(&seg->list_node); - xfer->segs_done++; - break; - case WA_SEG_DONE: - case WA_SEG_ERROR: - case WA_SEG_ABORTED: - break; - /* - * The buf_in data for a segment in the - * WA_SEG_DTI_PENDING state is actively being read. - * Let wa_buf_in_cb handle it since it will be called - * and will increment xfer->segs_done. Cleaning up - * here could cause wa_buf_in_cb to access the xfer - * after it has been completed/freed. - */ - case WA_SEG_DTI_PENDING: - break; - /* - * In the states below, the HWA device already knows - * about the transfer. If an abort request was sent, - * allow the HWA to process it and wait for the - * results. Otherwise, the DTI state and seg completed - * counts can get out of sync. - */ - case WA_SEG_SUBMITTED: - case WA_SEG_PENDING: - /* - * Check if the abort was successfully sent. This could - * be false if the HWA has been removed but we haven't - * gotten the disconnect notification yet. - */ - if (!xfer_abort_pending) { - seg->status = WA_SEG_ABORTED; - rpipe_ready = rpipe_avail_inc(rpipe); - xfer->segs_done++; - } - break; - } - } - spin_unlock(&rpipe->seg_lock); - xfer->result = urb->status; /* -ENOENT or -ECONNRESET */ - done = __wa_xfer_is_done(xfer); - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - wa_xfer_put(xfer); - return result; - -out_unlock: - spin_unlock_irqrestore(&xfer->lock, flags); - wa_xfer_put(xfer); - return result; - -dequeue_delayed: - list_del_init(&xfer->list_node); - spin_unlock(&wa->xfer_list_lock); - xfer->result = urb->status; - spin_unlock_irqrestore(&xfer->lock, flags); - wa_xfer_giveback(xfer); - wa_xfer_put(xfer); - usb_put_urb(urb); /* we got a ref in enqueue() */ - return 0; -} -EXPORT_SYMBOL_GPL(wa_urb_dequeue); - -/* - * Translation from WA status codes (WUSB1.0 Table 8.15) to errno - * codes - * - * Positive errno values are internal inconsistencies and should be - * flagged louder. Negative are to be passed up to the user in the - * normal way. - * - * @status: USB WA status code -- high two bits are stripped. - */ -static int wa_xfer_status_to_errno(u8 status) -{ - int errno; - u8 real_status = status; - static int xlat[] = { - [WA_XFER_STATUS_SUCCESS] = 0, - [WA_XFER_STATUS_HALTED] = -EPIPE, - [WA_XFER_STATUS_DATA_BUFFER_ERROR] = -ENOBUFS, - [WA_XFER_STATUS_BABBLE] = -EOVERFLOW, - [WA_XFER_RESERVED] = EINVAL, - [WA_XFER_STATUS_NOT_FOUND] = 0, - [WA_XFER_STATUS_INSUFFICIENT_RESOURCE] = -ENOMEM, - [WA_XFER_STATUS_TRANSACTION_ERROR] = -EILSEQ, - [WA_XFER_STATUS_ABORTED] = -ENOENT, - [WA_XFER_STATUS_RPIPE_NOT_READY] = EINVAL, - [WA_XFER_INVALID_FORMAT] = EINVAL, - [WA_XFER_UNEXPECTED_SEGMENT_NUMBER] = EINVAL, - [WA_XFER_STATUS_RPIPE_TYPE_MISMATCH] = EINVAL, - }; - status &= 0x3f; - - if (status == 0) - return 0; - if (status >= ARRAY_SIZE(xlat)) { - printk_ratelimited(KERN_ERR "%s(): BUG? " - "Unknown WA transfer status 0x%02x\n", - __func__, real_status); - return -EINVAL; - } - errno = xlat[status]; - if (unlikely(errno > 0)) { - printk_ratelimited(KERN_ERR "%s(): BUG? " - "Inconsistent WA status: 0x%02x\n", - __func__, real_status); - errno = -errno; - } - return errno; -} - -/* - * If a last segment flag and/or a transfer result error is encountered, - * no other segment transfer results will be returned from the device. - * Mark the remaining submitted or pending xfers as completed so that - * the xfer will complete cleanly. - * - * xfer->lock must be held - * - */ -static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, - int starting_index, enum wa_seg_status status) -{ - int index; - struct wa_rpipe *rpipe = xfer->ep->hcpriv; - - for (index = starting_index; index < xfer->segs_submitted; index++) { - struct wa_seg *current_seg = xfer->seg[index]; - - BUG_ON(current_seg == NULL); - - switch (current_seg->status) { - case WA_SEG_SUBMITTED: - case WA_SEG_PENDING: - case WA_SEG_DTI_PENDING: - rpipe_avail_inc(rpipe); - /* - * do not increment RPIPE avail for the WA_SEG_DELAYED case - * since it has not been submitted to the RPIPE. - */ - /* fall through */ - case WA_SEG_DELAYED: - xfer->segs_done++; - current_seg->status = status; - break; - case WA_SEG_ABORTED: - break; - default: - WARN(1, "%s: xfer 0x%08X#%d. bad seg status = %d\n", - __func__, wa_xfer_id(xfer), index, - current_seg->status); - break; - } - } -} - -/* Populate the given urb based on the current isoc transfer state. */ -static int __wa_populate_buf_in_urb_isoc(struct wahc *wa, - struct urb *buf_in_urb, struct wa_xfer *xfer, struct wa_seg *seg) -{ - int urb_start_frame = seg->isoc_frame_index + seg->isoc_frame_offset; - int seg_index, total_len = 0, urb_frame_index = urb_start_frame; - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; - const int dti_packet_size = usb_endpoint_maxp(wa->dti_epd); - int next_frame_contiguous; - struct usb_iso_packet_descriptor *iso_frame; - - BUG_ON(buf_in_urb->status == -EINPROGRESS); - - /* - * If the current frame actual_length is contiguous with the next frame - * and actual_length is a multiple of the DTI endpoint max packet size, - * combine the current frame with the next frame in a single URB. This - * reduces the number of URBs that must be submitted in that case. - */ - seg_index = seg->isoc_frame_index; - do { - next_frame_contiguous = 0; - - iso_frame = &iso_frame_desc[urb_frame_index]; - total_len += iso_frame->actual_length; - ++urb_frame_index; - ++seg_index; - - if (seg_index < seg->isoc_frame_count) { - struct usb_iso_packet_descriptor *next_iso_frame; - - next_iso_frame = &iso_frame_desc[urb_frame_index]; - - if ((iso_frame->offset + iso_frame->actual_length) == - next_iso_frame->offset) - next_frame_contiguous = 1; - } - } while (next_frame_contiguous - && ((iso_frame->actual_length % dti_packet_size) == 0)); - - /* this should always be 0 before a resubmit. */ - buf_in_urb->num_mapped_sgs = 0; - buf_in_urb->transfer_dma = xfer->urb->transfer_dma + - iso_frame_desc[urb_start_frame].offset; - buf_in_urb->transfer_buffer_length = total_len; - buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - buf_in_urb->transfer_buffer = NULL; - buf_in_urb->sg = NULL; - buf_in_urb->num_sgs = 0; - buf_in_urb->context = seg; - - /* return the number of frames included in this URB. */ - return seg_index - seg->isoc_frame_index; -} - -/* Populate the given urb based on the current transfer state. */ -static int wa_populate_buf_in_urb(struct urb *buf_in_urb, struct wa_xfer *xfer, - unsigned int seg_idx, unsigned int bytes_transferred) -{ - int result = 0; - struct wa_seg *seg = xfer->seg[seg_idx]; - - BUG_ON(buf_in_urb->status == -EINPROGRESS); - /* this should always be 0 before a resubmit. */ - buf_in_urb->num_mapped_sgs = 0; - - if (xfer->is_dma) { - buf_in_urb->transfer_dma = xfer->urb->transfer_dma - + (seg_idx * xfer->seg_size); - buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - buf_in_urb->transfer_buffer = NULL; - buf_in_urb->sg = NULL; - buf_in_urb->num_sgs = 0; - } else { - /* do buffer or SG processing. */ - buf_in_urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP; - - if (xfer->urb->transfer_buffer) { - buf_in_urb->transfer_buffer = - xfer->urb->transfer_buffer - + (seg_idx * xfer->seg_size); - buf_in_urb->sg = NULL; - buf_in_urb->num_sgs = 0; - } else { - /* allocate an SG list to store seg_size bytes - and copy the subset of the xfer->urb->sg - that matches the buffer subset we are - about to read. */ - buf_in_urb->sg = wa_xfer_create_subset_sg( - xfer->urb->sg, - seg_idx * xfer->seg_size, - bytes_transferred, - &(buf_in_urb->num_sgs)); - - if (!(buf_in_urb->sg)) { - buf_in_urb->num_sgs = 0; - result = -ENOMEM; - } - buf_in_urb->transfer_buffer = NULL; - } - } - buf_in_urb->transfer_buffer_length = bytes_transferred; - buf_in_urb->context = seg; - - return result; -} - -/* - * Process a xfer result completion message - * - * inbound transfers: need to schedule a buf_in_urb read - * - * FIXME: this function needs to be broken up in parts - */ -static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer, - struct wa_xfer_result *xfer_result) -{ - int result; - struct device *dev = &wa->usb_iface->dev; - unsigned long flags; - unsigned int seg_idx; - struct wa_seg *seg; - struct wa_rpipe *rpipe; - unsigned done = 0; - u8 usb_status; - unsigned rpipe_ready = 0; - unsigned bytes_transferred = le32_to_cpu(xfer_result->dwTransferLength); - struct urb *buf_in_urb = &(wa->buf_in_urbs[0]); - - spin_lock_irqsave(&xfer->lock, flags); - seg_idx = xfer_result->bTransferSegment & 0x7f; - if (unlikely(seg_idx >= xfer->segs)) - goto error_bad_seg; - seg = xfer->seg[seg_idx]; - rpipe = xfer->ep->hcpriv; - usb_status = xfer_result->bTransferStatus; - dev_dbg(dev, "xfer %p ID 0x%08X#%u: bTransferStatus 0x%02x (seg status %u)\n", - xfer, wa_xfer_id(xfer), seg_idx, usb_status, seg->status); - if (seg->status == WA_SEG_ABORTED - || seg->status == WA_SEG_ERROR) /* already handled */ - goto segment_aborted; - if (seg->status == WA_SEG_SUBMITTED) /* ops, got here */ - seg->status = WA_SEG_PENDING; /* before wa_seg{_dto}_cb() */ - if (seg->status != WA_SEG_PENDING) { - if (printk_ratelimit()) - dev_err(dev, "xfer %p#%u: Bad segment state %u\n", - xfer, seg_idx, seg->status); - seg->status = WA_SEG_PENDING; /* workaround/"fix" it */ - } - if (usb_status & 0x80) { - seg->result = wa_xfer_status_to_errno(usb_status); - dev_err(dev, "DTI: xfer %p 0x%08X:#%u failed (0x%02x)\n", - xfer, xfer->id, seg->index, usb_status); - seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ? - WA_SEG_ABORTED : WA_SEG_ERROR; - goto error_complete; - } - /* FIXME: we ignore warnings, tally them for stats */ - if (usb_status & 0x40) /* Warning?... */ - usb_status = 0; /* ... pass */ - /* - * If the last segment bit is set, complete the remaining segments. - * When the current segment is completed, either in wa_buf_in_cb for - * transfers with data or below for no data, the xfer will complete. - */ - if (xfer_result->bTransferSegment & 0x80) - wa_complete_remaining_xfer_segs(xfer, seg->index + 1, - WA_SEG_DONE); - if (usb_pipeisoc(xfer->urb->pipe) - && (le32_to_cpu(xfer_result->dwNumOfPackets) > 0)) { - /* set up WA state to read the isoc packet status next. */ - wa->dti_isoc_xfer_in_progress = wa_xfer_id(xfer); - wa->dti_isoc_xfer_seg = seg_idx; - wa->dti_state = WA_DTI_ISOC_PACKET_STATUS_PENDING; - } else if (xfer->is_inbound && !usb_pipeisoc(xfer->urb->pipe) - && (bytes_transferred > 0)) { - /* IN data phase: read to buffer */ - seg->status = WA_SEG_DTI_PENDING; - result = wa_populate_buf_in_urb(buf_in_urb, xfer, seg_idx, - bytes_transferred); - if (result < 0) - goto error_buf_in_populate; - ++(wa->active_buf_in_urbs); - result = usb_submit_urb(buf_in_urb, GFP_ATOMIC); - if (result < 0) { - --(wa->active_buf_in_urbs); - goto error_submit_buf_in; - } - } else { - /* OUT data phase or no data, complete it -- */ - seg->result = bytes_transferred; - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE); - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - return; - -error_submit_buf_in: - if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "DTI: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - } - if (printk_ratelimit()) - dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n", - xfer, seg_idx, result); - seg->result = result; - kfree(buf_in_urb->sg); - buf_in_urb->sg = NULL; -error_buf_in_populate: - __wa_xfer_abort(xfer); - seg->status = WA_SEG_ERROR; -error_complete: - xfer->segs_done++; - rpipe_ready = rpipe_avail_inc(rpipe); - wa_complete_remaining_xfer_segs(xfer, seg->index + 1, seg->status); - done = __wa_xfer_is_done(xfer); - /* - * queue work item to clear STALL for control endpoints. - * Otherwise, let endpoint_reset take care of it. - */ - if (((usb_status & 0x3f) == WA_XFER_STATUS_HALTED) && - usb_endpoint_xfer_control(&xfer->ep->desc) && - done) { - - dev_info(dev, "Control EP stall. Queue delayed work.\n"); - spin_lock(&wa->xfer_list_lock); - /* move xfer from xfer_list to xfer_errored_list. */ - list_move_tail(&xfer->list_node, &wa->xfer_errored_list); - spin_unlock(&wa->xfer_list_lock); - spin_unlock_irqrestore(&xfer->lock, flags); - queue_work(wusbd, &wa->xfer_error_work); - } else { - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - } - - return; - -error_bad_seg: - spin_unlock_irqrestore(&xfer->lock, flags); - wa_urb_dequeue(wa, xfer->urb, -ENOENT); - if (printk_ratelimit()) - dev_err(dev, "xfer %p#%u: bad segment\n", xfer, seg_idx); - if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "DTI: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - } - return; - -segment_aborted: - /* nothing to do, as the aborter did the completion */ - spin_unlock_irqrestore(&xfer->lock, flags); -} - -/* - * Process a isochronous packet status message - * - * inbound transfers: need to schedule a buf_in_urb read - */ -static int wa_process_iso_packet_status(struct wahc *wa, struct urb *urb) -{ - struct device *dev = &wa->usb_iface->dev; - struct wa_xfer_packet_status_hwaiso *packet_status; - struct wa_xfer_packet_status_len_hwaiso *status_array; - struct wa_xfer *xfer; - unsigned long flags; - struct wa_seg *seg; - struct wa_rpipe *rpipe; - unsigned done = 0, dti_busy = 0, data_frame_count = 0, seg_index; - unsigned first_frame_index = 0, rpipe_ready = 0; - size_t expected_size; - - /* We have a xfer result buffer; check it */ - dev_dbg(dev, "DTI: isoc packet status %d bytes at %p\n", - urb->actual_length, urb->transfer_buffer); - packet_status = (struct wa_xfer_packet_status_hwaiso *)(wa->dti_buf); - if (packet_status->bPacketType != WA_XFER_ISO_PACKET_STATUS) { - dev_err(dev, "DTI Error: isoc packet status--bad type 0x%02x\n", - packet_status->bPacketType); - goto error_parse_buffer; - } - xfer = wa_xfer_get_by_id(wa, wa->dti_isoc_xfer_in_progress); - if (xfer == NULL) { - dev_err(dev, "DTI Error: isoc packet status--unknown xfer 0x%08x\n", - wa->dti_isoc_xfer_in_progress); - goto error_parse_buffer; - } - spin_lock_irqsave(&xfer->lock, flags); - if (unlikely(wa->dti_isoc_xfer_seg >= xfer->segs)) - goto error_bad_seg; - seg = xfer->seg[wa->dti_isoc_xfer_seg]; - rpipe = xfer->ep->hcpriv; - expected_size = struct_size(packet_status, PacketStatus, - seg->isoc_frame_count); - if (urb->actual_length != expected_size) { - dev_err(dev, "DTI Error: isoc packet status--bad urb length (%d bytes vs %zu needed)\n", - urb->actual_length, expected_size); - goto error_bad_seg; - } - if (le16_to_cpu(packet_status->wLength) != expected_size) { - dev_err(dev, "DTI Error: isoc packet status--bad length %u\n", - le16_to_cpu(packet_status->wLength)); - goto error_bad_seg; - } - /* write isoc packet status and lengths back to the xfer urb. */ - status_array = packet_status->PacketStatus; - xfer->urb->start_frame = - wa->wusb->usb_hcd.driver->get_frame_number(&wa->wusb->usb_hcd); - for (seg_index = 0; seg_index < seg->isoc_frame_count; ++seg_index) { - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; - const int xfer_frame_index = - seg->isoc_frame_offset + seg_index; - - iso_frame_desc[xfer_frame_index].status = - wa_xfer_status_to_errno( - le16_to_cpu(status_array[seg_index].PacketStatus)); - iso_frame_desc[xfer_frame_index].actual_length = - le16_to_cpu(status_array[seg_index].PacketLength); - /* track the number of frames successfully transferred. */ - if (iso_frame_desc[xfer_frame_index].actual_length > 0) { - /* save the starting frame index for buf_in_urb. */ - if (!data_frame_count) - first_frame_index = seg_index; - ++data_frame_count; - } - } - - if (xfer->is_inbound && data_frame_count) { - int result, total_frames_read = 0, urb_index = 0; - struct urb *buf_in_urb; - - /* IN data phase: read to buffer */ - seg->status = WA_SEG_DTI_PENDING; - - /* start with the first frame with data. */ - seg->isoc_frame_index = first_frame_index; - /* submit up to WA_MAX_BUF_IN_URBS read URBs. */ - do { - int urb_frame_index, urb_frame_count; - struct usb_iso_packet_descriptor *iso_frame_desc; - - buf_in_urb = &(wa->buf_in_urbs[urb_index]); - urb_frame_count = __wa_populate_buf_in_urb_isoc(wa, - buf_in_urb, xfer, seg); - /* advance frame index to start of next read URB. */ - seg->isoc_frame_index += urb_frame_count; - total_frames_read += urb_frame_count; - - ++(wa->active_buf_in_urbs); - result = usb_submit_urb(buf_in_urb, GFP_ATOMIC); - - /* skip 0-byte frames. */ - urb_frame_index = - seg->isoc_frame_offset + seg->isoc_frame_index; - iso_frame_desc = - &(xfer->urb->iso_frame_desc[urb_frame_index]); - while ((seg->isoc_frame_index < - seg->isoc_frame_count) && - (iso_frame_desc->actual_length == 0)) { - ++(seg->isoc_frame_index); - ++iso_frame_desc; - } - ++urb_index; - - } while ((result == 0) && (urb_index < WA_MAX_BUF_IN_URBS) - && (seg->isoc_frame_index < - seg->isoc_frame_count)); - - if (result < 0) { - --(wa->active_buf_in_urbs); - dev_err(dev, "DTI Error: Could not submit buf in URB (%d)", - result); - wa_reset_all(wa); - } else if (data_frame_count > total_frames_read) - /* If we need to read more frames, set DTI busy. */ - dti_busy = 1; - } else { - /* OUT transfer or no more IN data, complete it -- */ - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE); - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (dti_busy) - wa->dti_state = WA_DTI_BUF_IN_DATA_PENDING; - else - wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - wa_xfer_put(xfer); - return dti_busy; - -error_bad_seg: - spin_unlock_irqrestore(&xfer->lock, flags); - wa_xfer_put(xfer); -error_parse_buffer: - return dti_busy; -} - -/* - * Callback for the IN data phase - * - * If successful transition state; otherwise, take a note of the - * error, mark this segment done and try completion. - * - * Note we don't access until we are sure that the transfer hasn't - * been cancelled (ECONNRESET, ENOENT), which could mean that - * seg->xfer could be already gone. - */ -static void wa_buf_in_cb(struct urb *urb) -{ - struct wa_seg *seg = urb->context; - struct wa_xfer *xfer = seg->xfer; - struct wahc *wa; - struct device *dev; - struct wa_rpipe *rpipe; - unsigned rpipe_ready = 0, isoc_data_frame_count = 0; - unsigned long flags; - int resubmit_dti = 0, active_buf_in_urbs; - u8 done = 0; - - /* free the sg if it was used. */ - kfree(urb->sg); - urb->sg = NULL; - - spin_lock_irqsave(&xfer->lock, flags); - wa = xfer->wa; - dev = &wa->usb_iface->dev; - --(wa->active_buf_in_urbs); - active_buf_in_urbs = wa->active_buf_in_urbs; - rpipe = xfer->ep->hcpriv; - - if (usb_pipeisoc(xfer->urb->pipe)) { - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; - int seg_index; - - /* - * Find the next isoc frame with data and count how many - * frames with data remain. - */ - seg_index = seg->isoc_frame_index; - while (seg_index < seg->isoc_frame_count) { - const int urb_frame_index = - seg->isoc_frame_offset + seg_index; - - if (iso_frame_desc[urb_frame_index].actual_length > 0) { - /* save the index of the next frame with data */ - if (!isoc_data_frame_count) - seg->isoc_frame_index = seg_index; - ++isoc_data_frame_count; - } - ++seg_index; - } - } - spin_unlock_irqrestore(&xfer->lock, flags); - - switch (urb->status) { - case 0: - spin_lock_irqsave(&xfer->lock, flags); - - seg->result += urb->actual_length; - if (isoc_data_frame_count > 0) { - int result, urb_frame_count; - - /* submit a read URB for the next frame with data. */ - urb_frame_count = __wa_populate_buf_in_urb_isoc(wa, urb, - xfer, seg); - /* advance index to start of next read URB. */ - seg->isoc_frame_index += urb_frame_count; - ++(wa->active_buf_in_urbs); - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result < 0) { - --(wa->active_buf_in_urbs); - dev_err(dev, "DTI Error: Could not submit buf in URB (%d)", - result); - wa_reset_all(wa); - } - /* - * If we are in this callback and - * isoc_data_frame_count > 0, it means that the dti_urb - * submission was delayed in wa_dti_cb. Once - * we submit the last buf_in_urb, we can submit the - * delayed dti_urb. - */ - resubmit_dti = (isoc_data_frame_count == - urb_frame_count); - } else if (active_buf_in_urbs == 0) { - dev_dbg(dev, - "xfer %p 0x%08X#%u: data in done (%zu bytes)\n", - xfer, wa_xfer_id(xfer), seg->index, - seg->result); - rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_mark_seg_as_done(xfer, seg, - WA_SEG_DONE); - } - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - break; - case -ECONNRESET: /* URB unlinked; no need to do anything */ - case -ENOENT: /* as it was done by the who unlinked us */ - break; - default: /* Other errors ... */ - /* - * Error on data buf read. Only resubmit DTI if it hasn't - * already been done by previously hitting this error or by a - * successful completion of the previous buf_in_urb. - */ - resubmit_dti = wa->dti_state != WA_DTI_TRANSFER_RESULT_PENDING; - spin_lock_irqsave(&xfer->lock, flags); - if (printk_ratelimit()) - dev_err(dev, "xfer %p 0x%08X#%u: data in error %d\n", - xfer, wa_xfer_id(xfer), seg->index, - urb->status); - if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)){ - dev_err(dev, "DTO: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - } - seg->result = urb->status; - rpipe_ready = rpipe_avail_inc(rpipe); - if (active_buf_in_urbs == 0) - done = __wa_xfer_mark_seg_as_done(xfer, seg, - WA_SEG_ERROR); - else - __wa_xfer_abort(xfer); - spin_unlock_irqrestore(&xfer->lock, flags); - if (done) - wa_xfer_completion(xfer); - if (rpipe_ready) - wa_xfer_delayed_run(rpipe); - } - - if (resubmit_dti) { - int result; - - wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; - - result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "DTI Error: Could not submit DTI URB (%d)\n", - result); - wa_reset_all(wa); - } - } -} - -/* - * Handle an incoming transfer result buffer - * - * Given a transfer result buffer, it completes the transfer (possibly - * scheduling and buffer in read) and then resubmits the DTI URB for a - * new transfer result read. - * - * - * The xfer_result DTI URB state machine - * - * States: OFF | RXR (Read-Xfer-Result) | RBI (Read-Buffer-In) - * - * We start in OFF mode, the first xfer_result notification [through - * wa_handle_notif_xfer()] moves us to RXR by posting the DTI-URB to - * read. - * - * We receive a buffer -- if it is not a xfer_result, we complain and - * repost the DTI-URB. If it is a xfer_result then do the xfer seg - * request accounting. If it is an IN segment, we move to RBI and post - * a BUF-IN-URB to the right buffer. The BUF-IN-URB callback will - * repost the DTI-URB and move to RXR state. if there was no IN - * segment, it will repost the DTI-URB. - * - * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many - * errors) in the URBs. - */ -static void wa_dti_cb(struct urb *urb) -{ - int result, dti_busy = 0; - struct wahc *wa = urb->context; - struct device *dev = &wa->usb_iface->dev; - u32 xfer_id; - u8 usb_status; - - BUG_ON(wa->dti_urb != urb); - switch (wa->dti_urb->status) { - case 0: - if (wa->dti_state == WA_DTI_TRANSFER_RESULT_PENDING) { - struct wa_xfer_result *xfer_result; - struct wa_xfer *xfer; - - /* We have a xfer result buffer; check it */ - dev_dbg(dev, "DTI: xfer result %d bytes at %p\n", - urb->actual_length, urb->transfer_buffer); - if (urb->actual_length != sizeof(*xfer_result)) { - dev_err(dev, "DTI Error: xfer result--bad size xfer result (%d bytes vs %zu needed)\n", - urb->actual_length, - sizeof(*xfer_result)); - break; - } - xfer_result = (struct wa_xfer_result *)(wa->dti_buf); - if (xfer_result->hdr.bLength != sizeof(*xfer_result)) { - dev_err(dev, "DTI Error: xfer result--bad header length %u\n", - xfer_result->hdr.bLength); - break; - } - if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) { - dev_err(dev, "DTI Error: xfer result--bad header type 0x%02x\n", - xfer_result->hdr.bNotifyType); - break; - } - xfer_id = le32_to_cpu(xfer_result->dwTransferID); - usb_status = xfer_result->bTransferStatus & 0x3f; - if (usb_status == WA_XFER_STATUS_NOT_FOUND) { - /* taken care of already */ - dev_dbg(dev, "%s: xfer 0x%08X#%u not found.\n", - __func__, xfer_id, - xfer_result->bTransferSegment & 0x7f); - break; - } - xfer = wa_xfer_get_by_id(wa, xfer_id); - if (xfer == NULL) { - /* FIXME: transaction not found. */ - dev_err(dev, "DTI Error: xfer result--unknown xfer 0x%08x (status 0x%02x)\n", - xfer_id, usb_status); - break; - } - wa_xfer_result_chew(wa, xfer, xfer_result); - wa_xfer_put(xfer); - } else if (wa->dti_state == WA_DTI_ISOC_PACKET_STATUS_PENDING) { - dti_busy = wa_process_iso_packet_status(wa, urb); - } else { - dev_err(dev, "DTI Error: unexpected EP state = %d\n", - wa->dti_state); - } - break; - case -ENOENT: /* (we killed the URB)...so, no broadcast */ - case -ESHUTDOWN: /* going away! */ - dev_dbg(dev, "DTI: going down! %d\n", urb->status); - goto out; - default: - /* Unknown error */ - if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "DTI: URB max acceptable errors " - "exceeded, resetting device\n"); - wa_reset_all(wa); - goto out; - } - if (printk_ratelimit()) - dev_err(dev, "DTI: URB error %d\n", urb->status); - break; - } - - /* Resubmit the DTI URB if we are not busy processing isoc in frames. */ - if (!dti_busy) { - result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "DTI Error: Could not submit DTI URB (%d)\n", - result); - wa_reset_all(wa); - } - } -out: - return; -} - -/* - * Initialize the DTI URB for reading transfer result notifications and also - * the buffer-in URB, for reading buffers. Then we just submit the DTI URB. - */ -int wa_dti_start(struct wahc *wa) -{ - const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd; - struct device *dev = &wa->usb_iface->dev; - int result = -ENOMEM, index; - - if (wa->dti_urb != NULL) /* DTI URB already started */ - goto out; - - wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL); - if (wa->dti_urb == NULL) - goto error_dti_urb_alloc; - usb_fill_bulk_urb( - wa->dti_urb, wa->usb_dev, - usb_rcvbulkpipe(wa->usb_dev, 0x80 | dti_epd->bEndpointAddress), - wa->dti_buf, wa->dti_buf_size, - wa_dti_cb, wa); - - /* init the buf in URBs */ - for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index) { - usb_fill_bulk_urb( - &(wa->buf_in_urbs[index]), wa->usb_dev, - usb_rcvbulkpipe(wa->usb_dev, - 0x80 | dti_epd->bEndpointAddress), - NULL, 0, wa_buf_in_cb, wa); - } - result = usb_submit_urb(wa->dti_urb, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "DTI Error: Could not submit DTI URB (%d) resetting\n", - result); - goto error_dti_urb_submit; - } -out: - return 0; - -error_dti_urb_submit: - usb_put_urb(wa->dti_urb); - wa->dti_urb = NULL; -error_dti_urb_alloc: - return result; -} -EXPORT_SYMBOL_GPL(wa_dti_start); -/* - * Transfer complete notification - * - * Called from the notif.c code. We get a notification on EP2 saying - * that some endpoint has some transfer result data available. We are - * about to read it. - * - * To speed up things, we always have a URB reading the DTI URB; we - * don't really set it up and start it until the first xfer complete - * notification arrives, which is what we do here. - * - * Follow up in wa_dti_cb(), as that's where the whole state - * machine starts. - * - * @wa shall be referenced - */ -void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr) -{ - struct device *dev = &wa->usb_iface->dev; - struct wa_notif_xfer *notif_xfer; - const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd; - - notif_xfer = container_of(notif_hdr, struct wa_notif_xfer, hdr); - BUG_ON(notif_hdr->bNotifyType != WA_NOTIF_TRANSFER); - - if ((0x80 | notif_xfer->bEndpoint) != dti_epd->bEndpointAddress) { - /* FIXME: hardcoded limitation, adapt */ - dev_err(dev, "BUG: DTI ep is %u, not %u (hack me)\n", - notif_xfer->bEndpoint, dti_epd->bEndpointAddress); - goto error; - } - - /* attempt to start the DTI ep processing. */ - if (wa_dti_start(wa) < 0) - goto error; - - return; - -error: - wa_reset_all(wa); -} diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c deleted file mode 100644 index d0b404d258e8..000000000000 --- a/drivers/usb/wusbcore/wusbhc.c +++ /dev/null @@ -1,490 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * sysfs glue, wusbcore module support and life cycle management - * - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * Creation/destruction of wusbhc is split in two parts; that that - * doesn't require the HCD to be added (wusbhc_{create,destroy}) and - * the one that requires (phase B, wusbhc_b_{create,destroy}). - * - * This is so because usb_add_hcd() will start the HC, and thus, all - * the HC specific stuff has to be already initialized (like sysfs - * thingies). - */ -#include <linux/device.h> -#include <linux/module.h> -#include "wusbhc.h" - -/** - * Extract the wusbhc that corresponds to a USB Host Controller class device - * - * WARNING! Apply only if @dev is that of a - * wusbhc.usb_hcd.self->class_dev; otherwise, you loose. - */ -static struct wusbhc *usbhc_dev_to_wusbhc(struct device *dev) -{ - struct usb_bus *usb_bus = dev_get_drvdata(dev); - struct usb_hcd *usb_hcd = bus_to_hcd(usb_bus); - return usb_hcd_to_wusbhc(usb_hcd); -} - -/* - * Show & store the current WUSB trust timeout - * - * We don't do locking--it is an 'atomic' value. - * - * The units that we store/show are always MILLISECONDS. However, the - * value of trust_timeout is jiffies. - */ -static ssize_t wusb_trust_timeout_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return scnprintf(buf, PAGE_SIZE, "%u\n", wusbhc->trust_timeout); -} - -static ssize_t wusb_trust_timeout_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - ssize_t result = -ENOSYS; - unsigned trust_timeout; - - result = sscanf(buf, "%u", &trust_timeout); - if (result != 1) { - result = -EINVAL; - goto out; - } - wusbhc->trust_timeout = min_t(unsigned, trust_timeout, 500); - cancel_delayed_work(&wusbhc->keep_alive_timer); - flush_workqueue(wusbd); - queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, - msecs_to_jiffies(wusbhc->trust_timeout / 2)); -out: - return result < 0 ? result : size; -} -static DEVICE_ATTR_RW(wusb_trust_timeout); - -/* - * Show the current WUSB CHID. - */ -static ssize_t wusb_chid_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - const struct wusb_ckhdid *chid; - - if (wusbhc->wuie_host_info != NULL) - chid = &wusbhc->wuie_host_info->CHID; - else - chid = &wusb_ckhdid_zero; - - return sprintf(buf, "%16ph\n", chid->data); -} - -/* - * Store a new CHID. - * - * - Write an all zeros CHID and it will stop the controller - * - Write a non-zero CHID and it will start it. - * - * See wusbhc_chid_set() for more info. - */ -static ssize_t wusb_chid_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - struct wusb_ckhdid chid; - ssize_t result; - - result = sscanf(buf, - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx\n", - &chid.data[0] , &chid.data[1] , - &chid.data[2] , &chid.data[3] , - &chid.data[4] , &chid.data[5] , - &chid.data[6] , &chid.data[7] , - &chid.data[8] , &chid.data[9] , - &chid.data[10], &chid.data[11], - &chid.data[12], &chid.data[13], - &chid.data[14], &chid.data[15]); - if (result != 16) { - dev_err(dev, "Unrecognized CHID (need 16 8-bit hex digits): " - "%d\n", (int)result); - return -EINVAL; - } - result = wusbhc_chid_set(wusbhc, &chid); - return result < 0 ? result : size; -} -static DEVICE_ATTR_RW(wusb_chid); - - -static ssize_t wusb_phy_rate_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return sprintf(buf, "%d\n", wusbhc->phy_rate); -} - -static ssize_t wusb_phy_rate_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - uint8_t phy_rate; - ssize_t result; - - result = sscanf(buf, "%hhu", &phy_rate); - if (result != 1) - return -EINVAL; - if (phy_rate >= UWB_PHY_RATE_INVALID) - return -EINVAL; - - wusbhc->phy_rate = phy_rate; - return size; -} -static DEVICE_ATTR_RW(wusb_phy_rate); - -static ssize_t wusb_dnts_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return sprintf(buf, "num slots: %d\ninterval: %dms\n", - wusbhc->dnts_num_slots, wusbhc->dnts_interval); -} - -static ssize_t wusb_dnts_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - uint8_t num_slots, interval; - ssize_t result; - - result = sscanf(buf, "%hhu %hhu", &num_slots, &interval); - - if (result != 2) - return -EINVAL; - - wusbhc->dnts_num_slots = num_slots; - wusbhc->dnts_interval = interval; - - return size; -} -static DEVICE_ATTR_RW(wusb_dnts); - -static ssize_t wusb_retry_count_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - - return sprintf(buf, "%d\n", wusbhc->retry_count); -} - -static ssize_t wusb_retry_count_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); - uint8_t retry_count; - ssize_t result; - - result = sscanf(buf, "%hhu", &retry_count); - - if (result != 1) - return -EINVAL; - - wusbhc->retry_count = max_t(uint8_t, retry_count, - WUSB_RETRY_COUNT_MAX); - - return size; -} -static DEVICE_ATTR_RW(wusb_retry_count); - -/* Group all the WUSBHC attributes */ -static struct attribute *wusbhc_attrs[] = { - &dev_attr_wusb_trust_timeout.attr, - &dev_attr_wusb_chid.attr, - &dev_attr_wusb_phy_rate.attr, - &dev_attr_wusb_dnts.attr, - &dev_attr_wusb_retry_count.attr, - NULL, -}; - -static const struct attribute_group wusbhc_attr_group = { - .name = NULL, /* we want them in the same directory */ - .attrs = wusbhc_attrs, -}; - -/* - * Create a wusbhc instance - * - * NOTEs: - * - * - assumes *wusbhc has been zeroed and wusbhc->usb_hcd has been - * initialized but not added. - * - * - fill out ports_max, mmcies_max and mmcie_{add,rm} before calling. - * - * - fill out wusbhc->uwb_rc and refcount it before calling - * - fill out the wusbhc->sec_modes array - */ -int wusbhc_create(struct wusbhc *wusbhc) -{ - int result = 0; - - /* set defaults. These can be overwritten using sysfs attributes. */ - wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS; - wusbhc->phy_rate = UWB_PHY_RATE_INVALID - 1; - wusbhc->dnts_num_slots = 4; - wusbhc->dnts_interval = 2; - wusbhc->retry_count = WUSB_RETRY_COUNT_INFINITE; - - mutex_init(&wusbhc->mutex); - result = wusbhc_mmcie_create(wusbhc); - if (result < 0) - goto error_mmcie_create; - result = wusbhc_devconnect_create(wusbhc); - if (result < 0) - goto error_devconnect_create; - result = wusbhc_rh_create(wusbhc); - if (result < 0) - goto error_rh_create; - result = wusbhc_sec_create(wusbhc); - if (result < 0) - goto error_sec_create; - return 0; - -error_sec_create: - wusbhc_rh_destroy(wusbhc); -error_rh_create: - wusbhc_devconnect_destroy(wusbhc); -error_devconnect_create: - wusbhc_mmcie_destroy(wusbhc); -error_mmcie_create: - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_create); - -static inline struct kobject *wusbhc_kobj(struct wusbhc *wusbhc) -{ - return &wusbhc->usb_hcd.self.controller->kobj; -} - -/* - * Phase B of a wusbhc instance creation - * - * Creates fields that depend on wusbhc->usb_hcd having been - * added. This is where we create the sysfs files in - * /sys/class/usb_host/usb_hostX/. - * - * NOTE: Assumes wusbhc->usb_hcd has been already added by the upper - * layer (hwahc or whci) - */ -int wusbhc_b_create(struct wusbhc *wusbhc) -{ - int result = 0; - struct device *dev = wusbhc->usb_hcd.self.controller; - - result = sysfs_create_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); - if (result < 0) { - dev_err(dev, "Cannot register WUSBHC attributes: %d\n", - result); - goto error_create_attr_group; - } - - return 0; -error_create_attr_group: - return result; -} -EXPORT_SYMBOL_GPL(wusbhc_b_create); - -void wusbhc_b_destroy(struct wusbhc *wusbhc) -{ - wusbhc_pal_unregister(wusbhc); - sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); -} -EXPORT_SYMBOL_GPL(wusbhc_b_destroy); - -void wusbhc_destroy(struct wusbhc *wusbhc) -{ - wusbhc_sec_destroy(wusbhc); - wusbhc_rh_destroy(wusbhc); - wusbhc_devconnect_destroy(wusbhc); - wusbhc_mmcie_destroy(wusbhc); -} -EXPORT_SYMBOL_GPL(wusbhc_destroy); - -struct workqueue_struct *wusbd; -EXPORT_SYMBOL_GPL(wusbd); - -/* - * WUSB Cluster ID allocation map - * - * Each WUSB bus in a channel is identified with a Cluster Id in the - * unauth address pace (WUSB1.0[4.3]). We take the range 0xe0 to 0xff - * (that's space for 31 WUSB controllers, as 0xff can't be taken). We - * start taking from 0xff, 0xfe, 0xfd... (hence the += or -= 0xff). - * - * For each one we taken, we pin it in the bitap - */ -#define CLUSTER_IDS 32 -static DECLARE_BITMAP(wusb_cluster_id_table, CLUSTER_IDS); -static DEFINE_SPINLOCK(wusb_cluster_ids_lock); - -/* - * Get a WUSB Cluster ID - * - * Need to release with wusb_cluster_id_put() when done w/ it. - */ -/* FIXME: coordinate with the choose_addres() from the USB stack */ -/* we want to leave the top of the 128 range for cluster addresses and - * the bottom for device addresses (as we map them one on one with - * ports). */ -u8 wusb_cluster_id_get(void) -{ - u8 id; - spin_lock(&wusb_cluster_ids_lock); - id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS); - if (id >= CLUSTER_IDS) { - id = 0; - goto out; - } - set_bit(id, wusb_cluster_id_table); - id = (u8) 0xff - id; -out: - spin_unlock(&wusb_cluster_ids_lock); - return id; - -} -EXPORT_SYMBOL_GPL(wusb_cluster_id_get); - -/* - * Release a WUSB Cluster ID - * - * Obtained it with wusb_cluster_id_get() - */ -void wusb_cluster_id_put(u8 id) -{ - id = 0xff - id; - BUG_ON(id >= CLUSTER_IDS); - spin_lock(&wusb_cluster_ids_lock); - WARN_ON(!test_bit(id, wusb_cluster_id_table)); - clear_bit(id, wusb_cluster_id_table); - spin_unlock(&wusb_cluster_ids_lock); -} -EXPORT_SYMBOL_GPL(wusb_cluster_id_put); - -/** - * wusbhc_giveback_urb - return an URB to the USB core - * @wusbhc: the host controller the URB is from. - * @urb: the URB. - * @status: the URB's status. - * - * Return an URB to the USB core doing some additional WUSB specific - * processing. - * - * - After a successful transfer, update the trust timeout timestamp - * for the WUSB device. - * - * - [WUSB] sections 4.13 and 7.5.1 specify the stop retransmission - * condition for the WCONNECTACK_IE is that the host has observed - * the associated device responding to a control transfer. - */ -void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status) -{ - struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, - urb->dev); - - if (status == 0 && wusb_dev) { - wusb_dev->entry_ts = jiffies; - - /* wusbhc_devconnect_acked() can't be called from - atomic context so defer it to a work queue. */ - if (!list_empty(&wusb_dev->cack_node)) - queue_work(wusbd, &wusb_dev->devconnect_acked_work); - else - wusb_dev_put(wusb_dev); - } - - usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status); -} -EXPORT_SYMBOL_GPL(wusbhc_giveback_urb); - -/** - * wusbhc_reset_all - reset the HC hardware - * @wusbhc: the host controller to reset. - * - * Request a full hardware reset of the chip. This will also reset - * the radio controller and any other PALs. - */ -void wusbhc_reset_all(struct wusbhc *wusbhc) -{ - if (wusbhc->uwb_rc) - uwb_rc_reset_all(wusbhc->uwb_rc); -} -EXPORT_SYMBOL_GPL(wusbhc_reset_all); - -static struct notifier_block wusb_usb_notifier = { - .notifier_call = wusb_usb_ncb, - .priority = INT_MAX /* Need to be called first of all */ -}; - -static int __init wusbcore_init(void) -{ - int result; - result = wusb_crypto_init(); - if (result < 0) - goto error_crypto_init; - /* WQ is singlethread because we need to serialize notifications */ - wusbd = create_singlethread_workqueue("wusbd"); - if (wusbd == NULL) { - result = -ENOMEM; - printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n"); - goto error_wusbd_create; - } - usb_register_notify(&wusb_usb_notifier); - bitmap_zero(wusb_cluster_id_table, CLUSTER_IDS); - set_bit(0, wusb_cluster_id_table); /* reserve Cluster ID 0xff */ - return 0; - -error_wusbd_create: - wusb_crypto_exit(); -error_crypto_init: - return result; - -} -module_init(wusbcore_init); - -static void __exit wusbcore_exit(void) -{ - clear_bit(0, wusb_cluster_id_table); - if (!bitmap_empty(wusb_cluster_id_table, CLUSTER_IDS)) { - printk(KERN_ERR "BUG: WUSB Cluster IDs not released on exit: %*pb\n", - CLUSTER_IDS, wusb_cluster_id_table); - WARN_ON(1); - } - usb_unregister_notify(&wusb_usb_notifier); - destroy_workqueue(wusbd); - wusb_crypto_exit(); -} -module_exit(wusbcore_exit); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Wireless USB core"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h deleted file mode 100644 index 7681d796ca5b..000000000000 --- a/drivers/usb/wusbcore/wusbhc.h +++ /dev/null @@ -1,487 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Wireless USB Host Controller - * Common infrastructure for WHCI and HWA WUSB-HC drivers - * - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This driver implements parts common to all Wireless USB Host - * Controllers (struct wusbhc, embedding a struct usb_hcd) and is used - * by: - * - * - hwahc: HWA, USB-dongle that implements a Wireless USB host - * controller, (Wireless USB 1.0 Host-Wire-Adapter specification). - * - * - whci: WHCI, a PCI card with a wireless host controller - * (Wireless Host Controller Interface 1.0 specification). - * - * Check out the Design-overview.txt file in the source documentation - * for other details on the implementation. - * - * Main blocks: - * - * rh Root Hub emulation (part of the HCD glue) - * - * devconnect Handle all the issues related to device connection, - * authentication, disconnection, timeout, reseting, - * keepalives, etc. - * - * mmc MMC IE broadcasting handling - * - * A host controller driver just initializes its stuff and as part of - * that, creates a 'struct wusbhc' instance that handles all the - * common WUSB mechanisms. Links in the function ops that are specific - * to it and then registers the host controller. Ready to run. - */ - -#ifndef __WUSBHC_H__ -#define __WUSBHC_H__ - -#include <linux/usb.h> -#include <linux/list.h> -#include <linux/mutex.h> -#include <linux/kref.h> -#include <linux/workqueue.h> -#include <linux/usb/hcd.h> -#include <linux/uwb.h> -#include <linux/usb/wusb.h> - -/* - * Time from a WUSB channel stop request to the last transmitted MMC. - * - * This needs to be > 4.096 ms in case no MMCs can be transmitted in - * zone 0. - */ -#define WUSB_CHANNEL_STOP_DELAY_MS 8 -#define WUSB_RETRY_COUNT_MAX 15 -#define WUSB_RETRY_COUNT_INFINITE 0 - -/** - * Wireless USB device - * - * Describe a WUSB device connected to the cluster. This struct - * belongs to the 'struct wusb_port' it is attached to and it is - * responsible for putting and clearing the pointer to it. - * - * Note this "complements" the 'struct usb_device' that the usb_hcd - * keeps for each connected USB device. However, it extends some - * information that is not available (there is no hcpriv ptr in it!) - * *and* most importantly, it's life cycle is different. It is created - * as soon as we get a DN_Connect (connect request notification) from - * the device through the WUSB host controller; the USB stack doesn't - * create the device until we authenticate it. FIXME: this will - * change. - * - * @bos: This is allocated when the BOS descriptors are read from - * the device and freed upon the wusb_dev struct dying. - * @wusb_cap_descr: points into @bos, and has been verified to be size - * safe. - */ -struct wusb_dev { - struct kref refcnt; - struct wusbhc *wusbhc; - struct list_head cack_node; /* Connect-Ack list */ - struct list_head rekey_node; /* GTK rekey list */ - u8 port_idx; - u8 addr; - u8 beacon_type:4; - struct usb_encryption_descriptor ccm1_etd; - struct wusb_ckhdid cdid; - unsigned long entry_ts; - struct usb_bos_descriptor *bos; - struct usb_wireless_cap_descriptor *wusb_cap_descr; - struct uwb_mas_bm availability; - struct work_struct devconnect_acked_work; - struct usb_device *usb_dev; -}; - -#define WUSB_DEV_ADDR_UNAUTH 0x80 - -static inline void wusb_dev_init(struct wusb_dev *wusb_dev) -{ - kref_init(&wusb_dev->refcnt); - /* no need to init the cack_node */ -} - -extern void wusb_dev_destroy(struct kref *_wusb_dev); - -static inline struct wusb_dev *wusb_dev_get(struct wusb_dev *wusb_dev) -{ - kref_get(&wusb_dev->refcnt); - return wusb_dev; -} - -static inline void wusb_dev_put(struct wusb_dev *wusb_dev) -{ - kref_put(&wusb_dev->refcnt, wusb_dev_destroy); -} - -/** - * Wireless USB Host Controller root hub "fake" ports - * (state and device information) - * - * Wireless USB is wireless, so there are no ports; but we - * fake'em. Each RC can connect a max of devices at the same time - * (given in the Wireless Adapter descriptor, bNumPorts or WHCI's - * caps), referred to in wusbhc->ports_max. - * - * See rh.c for more information. - * - * The @status and @change use the same bits as in USB2.0[11.24.2.7], - * so we don't have to do much when getting the port's status. - * - * WUSB1.0[7.1], USB2.0[11.24.2.7.1,fig 11-10], - * include/linux/usb_ch9.h (#define USB_PORT_STAT_*) - */ -struct wusb_port { - u16 status; - u16 change; - struct wusb_dev *wusb_dev; /* connected device's info */ - u32 ptk_tkid; -}; - -/** - * WUSB Host Controller specifics - * - * All fields that are common to all Wireless USB controller types - * (HWA and WHCI) are grouped here. Host Controller - * functions/operations that only deal with general Wireless USB HC - * issues use this data type to refer to the host. - * - * @usb_hcd Instantiation of a USB host controller - * (initialized by upper layer [HWA=HC or WHCI]. - * - * @dev Device that implements this; initialized by the - * upper layer (HWA-HC, WHCI...); this device should - * have a refcount. - * - * @trust_timeout After this time without hearing for device - * activity, we consider the device gone and we have to - * re-authenticate. - * - * Can be accessed w/o locking--however, read to a - * local variable then use. - * - * @chid WUSB Cluster Host ID: this is supposed to be a - * unique value that doesn't change across reboots (so - * that your devices do not require re-association). - * - * Read/Write protected by @mutex - * - * @dev_info This array has ports_max elements. It is used to - * give the HC information about the WUSB devices (see - * 'struct wusb_dev_info'). - * - * For HWA we need to allocate it in heap; for WHCI it - * needs to be permanently mapped, so we keep it for - * both and make it easy. Call wusbhc->dev_info_set() - * to update an entry. - * - * @ports_max Number of simultaneous device connections (fake - * ports) this HC will take. Read-only. - * - * @port Array of port status for each fake root port. Guaranteed to - * always be the same length during device existence - * [this allows for some unlocked but referenced reading]. - * - * @mmcies_max Max number of Information Elements this HC can send - * in its MMC. Read-only. - * - * @start Start the WUSB channel. - * - * @stop Stop the WUSB channel after the specified number of - * milliseconds. Channel Stop IEs should be transmitted - * as required by [WUSB] 4.16.2.1. - * - * @mmcie_add HC specific operation (WHCI or HWA) for adding an - * MMCIE. - * - * @mmcie_rm HC specific operation (WHCI or HWA) for removing an - * MMCIE. - * - * @set_ptk: Set the PTK and enable encryption for a device. Or, if - * the supplied key is NULL, disable encryption for that - * device. - * - * @set_gtk: Set the GTK to be used for all future broadcast packets - * (i.e., MMCs). With some hardware, setting the GTK may start - * MMC transmission. - * - * NOTE: - * - * - If wusb_dev->usb_dev is not NULL, then usb_dev is valid - * (wusb_dev has a refcount on it). Likewise, if usb_dev->wusb_dev - * is not NULL, usb_dev->wusb_dev is valid (usb_dev keeps a - * refcount on it). - * - * Most of the times when you need to use it, it will be non-NULL, - * so there is no real need to check for it (wusb_dev will - * disappear before usb_dev). - * - * - The following fields need to be filled out before calling - * wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}. - * - * - there is no wusbhc_init() method, we do everything in - * wusbhc_create(). - * - * - Creation is done in two phases, wusbhc_create() and - * wusbhc_create_b(); b are the parts that need to be called after - * calling usb_hcd_add(&wusbhc->usb_hcd). - */ -struct wusbhc { - struct usb_hcd usb_hcd; /* HAS TO BE 1st */ - struct device *dev; - struct uwb_rc *uwb_rc; - struct uwb_pal pal; - - unsigned trust_timeout; /* in jiffies */ - struct wusb_ckhdid chid; - uint8_t phy_rate; - uint8_t dnts_num_slots; - uint8_t dnts_interval; - uint8_t retry_count; - struct wuie_host_info *wuie_host_info; - - struct mutex mutex; /* locks everything else */ - u16 cluster_id; /* Wireless USB Cluster ID */ - struct wusb_port *port; /* Fake port status handling */ - struct wusb_dev_info *dev_info; /* for Set Device Info mgmt */ - u8 ports_max; - unsigned active:1; /* currently xmit'ing MMCs */ - struct wuie_keep_alive keep_alive_ie; /* protected by mutex */ - struct delayed_work keep_alive_timer; - struct list_head cack_list; /* Connect acknowledging */ - size_t cack_count; /* protected by 'mutex' */ - struct wuie_connect_ack cack_ie; - struct uwb_rsv *rsv; /* cluster bandwidth reservation */ - - struct mutex mmcie_mutex; /* MMC WUIE handling */ - struct wuie_hdr **mmcie; /* WUIE array */ - u8 mmcies_max; - /* FIXME: make wusbhc_ops? */ - int (*start)(struct wusbhc *wusbhc); - void (*stop)(struct wusbhc *wusbhc, int delay); - int (*mmcie_add)(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, - u8 handle, struct wuie_hdr *wuie); - int (*mmcie_rm)(struct wusbhc *wusbhc, u8 handle); - int (*dev_info_set)(struct wusbhc *, struct wusb_dev *wusb_dev); - int (*bwa_set)(struct wusbhc *wusbhc, s8 stream_index, - const struct uwb_mas_bm *); - int (*set_ptk)(struct wusbhc *wusbhc, u8 port_idx, - u32 tkid, const void *key, size_t key_size); - int (*set_gtk)(struct wusbhc *wusbhc, - u32 tkid, const void *key, size_t key_size); - int (*set_num_dnts)(struct wusbhc *wusbhc, u8 interval, u8 slots); - - struct { - struct usb_key_descriptor descr; - u8 data[16]; /* GTK key data */ - } __attribute__((packed)) gtk; - u8 gtk_index; - u32 gtk_tkid; - - /* workqueue for WUSB security related tasks. */ - struct workqueue_struct *wq_security; - struct work_struct gtk_rekey_work; - - struct usb_encryption_descriptor *ccm1_etd; -}; - -#define usb_hcd_to_wusbhc(u) container_of((u), struct wusbhc, usb_hcd) - - -extern int wusbhc_create(struct wusbhc *); -extern int wusbhc_b_create(struct wusbhc *); -extern void wusbhc_b_destroy(struct wusbhc *); -extern void wusbhc_destroy(struct wusbhc *); -extern int wusb_dev_sysfs_add(struct wusbhc *, struct usb_device *, - struct wusb_dev *); -extern void wusb_dev_sysfs_rm(struct wusb_dev *); -extern int wusbhc_sec_create(struct wusbhc *); -extern int wusbhc_sec_start(struct wusbhc *); -extern void wusbhc_sec_stop(struct wusbhc *); -extern void wusbhc_sec_destroy(struct wusbhc *); -extern void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, - int status); -void wusbhc_reset_all(struct wusbhc *wusbhc); - -int wusbhc_pal_register(struct wusbhc *wusbhc); -void wusbhc_pal_unregister(struct wusbhc *wusbhc); - -/* - * Return @usb_dev's @usb_hcd (properly referenced) or NULL if gone - * - * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr) - * - * This is a safe assumption as @usb_dev->bus is referenced all the - * time during the @usb_dev life cycle. - */ -static inline -struct usb_hcd *usb_hcd_get_by_usb_dev(struct usb_device *usb_dev) -{ - struct usb_hcd *usb_hcd; - usb_hcd = bus_to_hcd(usb_dev->bus); - return usb_get_hcd(usb_hcd); -} - -/* - * Increment the reference count on a wusbhc. - * - * @wusbhc's life cycle is identical to that of the underlying usb_hcd. - */ -static inline struct wusbhc *wusbhc_get(struct wusbhc *wusbhc) -{ - return usb_get_hcd(&wusbhc->usb_hcd) ? wusbhc : NULL; -} - -/* - * Return the wusbhc associated to a @usb_dev - * - * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr) - * - * @returns: wusbhc for @usb_dev; NULL if the @usb_dev is being torn down. - * WARNING: referenced at the usb_hcd level, unlocked - * - * FIXME: move offline - */ -static inline struct wusbhc *wusbhc_get_by_usb_dev(struct usb_device *usb_dev) -{ - struct wusbhc *wusbhc = NULL; - struct usb_hcd *usb_hcd; - if (usb_dev->devnum > 1 && !usb_dev->wusb) { - /* but root hubs */ - dev_err(&usb_dev->dev, "devnum %d wusb %d\n", usb_dev->devnum, - usb_dev->wusb); - BUG_ON(usb_dev->devnum > 1 && !usb_dev->wusb); - } - usb_hcd = usb_hcd_get_by_usb_dev(usb_dev); - if (usb_hcd == NULL) - return NULL; - BUG_ON(usb_hcd->wireless == 0); - return wusbhc = usb_hcd_to_wusbhc(usb_hcd); -} - - -static inline void wusbhc_put(struct wusbhc *wusbhc) -{ - usb_put_hcd(&wusbhc->usb_hcd); -} - -int wusbhc_start(struct wusbhc *wusbhc); -void wusbhc_stop(struct wusbhc *wusbhc); -extern int wusbhc_chid_set(struct wusbhc *, const struct wusb_ckhdid *); - -/* Device connect handling */ -extern int wusbhc_devconnect_create(struct wusbhc *); -extern void wusbhc_devconnect_destroy(struct wusbhc *); -extern int wusbhc_devconnect_start(struct wusbhc *wusbhc); -extern void wusbhc_devconnect_stop(struct wusbhc *wusbhc); -extern void wusbhc_handle_dn(struct wusbhc *, u8 srcaddr, - struct wusb_dn_hdr *dn_hdr, size_t size); -extern void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port); -extern int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, - void *priv); -extern int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, - u8 addr); - -/* Wireless USB fake Root Hub methods */ -extern int wusbhc_rh_create(struct wusbhc *); -extern void wusbhc_rh_destroy(struct wusbhc *); - -extern int wusbhc_rh_status_data(struct usb_hcd *, char *); -extern int wusbhc_rh_control(struct usb_hcd *, u16, u16, u16, char *, u16); -extern int wusbhc_rh_start_port_reset(struct usb_hcd *, unsigned); - -/* MMC handling */ -extern int wusbhc_mmcie_create(struct wusbhc *); -extern void wusbhc_mmcie_destroy(struct wusbhc *); -extern int wusbhc_mmcie_set(struct wusbhc *, u8 interval, u8 repeat_cnt, - struct wuie_hdr *); -extern void wusbhc_mmcie_rm(struct wusbhc *, struct wuie_hdr *); - -/* Bandwidth reservation */ -int wusbhc_rsv_establish(struct wusbhc *wusbhc); -void wusbhc_rsv_terminate(struct wusbhc *wusbhc); - -/* - * I've always said - * I wanted a wedding in a church... - * - * but lately I've been thinking about - * the Botanical Gardens. - * - * We could do it by the tulips. - * It'll be beautiful - * - * --Security! - */ -extern int wusb_dev_sec_add(struct wusbhc *, struct usb_device *, - struct wusb_dev *); -extern void wusb_dev_sec_rm(struct wusb_dev *) ; -extern int wusb_dev_4way_handshake(struct wusbhc *, struct wusb_dev *, - struct wusb_ckhdid *ck); -void wusbhc_gtk_rekey(struct wusbhc *wusbhc); -int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev); - - -/* WUSB Cluster ID handling */ -extern u8 wusb_cluster_id_get(void); -extern void wusb_cluster_id_put(u8); - -/* - * wusb_port_by_idx - return the port associated to a zero-based port index - * - * NOTE: valid without locking as long as wusbhc is referenced (as the - * number of ports doesn't change). The data pointed to has to - * be verified though :) - */ -static inline struct wusb_port *wusb_port_by_idx(struct wusbhc *wusbhc, - u8 port_idx) -{ - return &wusbhc->port[port_idx]; -} - -/* - * wusb_port_no_to_idx - Convert port number (per usb_dev->portnum) to - * a port_idx. - * - * USB stack USB ports are 1 based!! - * - * NOTE: only valid for WUSB devices!!! - */ -static inline u8 wusb_port_no_to_idx(u8 port_no) -{ - return port_no - 1; -} - -extern struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *, - struct usb_device *); - -/* - * Return a referenced wusb_dev given a @usb_dev - * - * Returns NULL if the usb_dev is being torn down. - * - * FIXME: move offline - */ -static inline -struct wusb_dev *wusb_dev_get_by_usb_dev(struct usb_device *usb_dev) -{ - struct wusbhc *wusbhc; - struct wusb_dev *wusb_dev; - wusbhc = wusbhc_get_by_usb_dev(usb_dev); - if (wusbhc == NULL) - return NULL; - mutex_lock(&wusbhc->mutex); - wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev); - mutex_unlock(&wusbhc->mutex); - wusbhc_put(wusbhc); - return wusb_dev; -} - -/* Misc */ - -extern struct workqueue_struct *wusbd; -#endif /* #ifndef __WUSBHC_H__ */ |