aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/Makefile2
-rw-r--r--drivers/usb/class/cdc-wdm.c2
-rw-r--r--drivers/usb/core/hub.c18
-rw-r--r--drivers/usb/dwc3/gadget.c3
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--drivers/usb/gadget/fsl_qe_udc.h4
-rw-r--r--drivers/usb/gadget/lpc32xx_udc.c1
-rw-r--r--drivers/usb/gadget/omap_udc.c3
-rw-r--r--drivers/usb/gadget/tcm_usb_gadget.c54
-rw-r--r--drivers/usb/host/Kconfig2
-rw-r--r--drivers/usb/host/ehci-omap.c18
-rw-r--r--drivers/usb/host/ohci-omap.c7
-rw-r--r--drivers/usb/host/xhci-hub.c44
-rw-r--r--drivers/usb/host/xhci-ring.c11
-rw-r--r--drivers/usb/host/xhci.h6
-rw-r--r--drivers/usb/musb/musb_host.c14
-rw-r--r--drivers/usb/otg/isp1301_omap.c2
-rw-r--r--drivers/usb/otg/twl6030-usb.c15
-rw-r--r--drivers/usb/phy/Kconfig4
-rw-r--r--drivers/usb/serial/cp210x.c11
-rw-r--r--drivers/usb/serial/metro-usb.c8
-rw-r--r--drivers/usb/serial/option.c34
-rw-r--r--drivers/usb/storage/scsiglue.c6
-rw-r--r--drivers/usb/storage/unusual_devs.h7
24 files changed, 184 insertions, 94 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index c691eea51537..f5ed3d75fa5a 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB) += phy/
+obj-$(CONFIG_USB_COMMON) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 8fd398dffced..ee469274a3fe 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -500,6 +500,8 @@ retry:
goto retry;
}
if (!desc->reslength) { /* zero length read */
+ dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
+ clear_bit(WDM_READ, &desc->flags);
spin_unlock_irq(&desc->iuspin);
goto retry;
}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 25a7422ee657..8fb484984c86 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2324,12 +2324,16 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
-/* Is a USB 3.0 port in the Inactive state? */
-static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus)
+/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+ * Port worm reset is required to recover
+ */
+static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
{
return hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE) ==
- USB_SS_PORT_LS_SS_INACTIVE;
+ (((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_SS_INACTIVE) ||
+ ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_COMP_MOD)) ;
}
static int hub_port_wait_reset(struct usb_hub *hub, int port1,
@@ -2365,7 +2369,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
*
* See https://bugzilla.kernel.org/show_bug.cgi?id=41752
*/
- if (hub_port_inactive(hub, portstatus)) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
int ret;
if ((portchange & USB_PORT_STAT_C_CONNECTION))
@@ -4408,9 +4412,7 @@ static void hub_events(void)
/* Warm reset a USB3 protocol port if it's in
* SS.Inactive state.
*/
- if (hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE)
- == USB_SS_PORT_LS_SS_INACTIVE) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
dev_dbg(hub_dev, "warm reset port %d\n", i);
hub_port_reset(hub, i, NULL,
HUB_BH_RESET_TIME, true);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3df1a1973b05..ec70df7aba17 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1091,7 +1091,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
if (r == req) {
/* wait until it is processed */
dwc3_stop_active_transfer(dwc, dep->number);
- goto out0;
+ goto out1;
}
dev_err(dwc->dev, "request %p was not queued to %s\n",
request, ep->name);
@@ -1099,6 +1099,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
goto out0;
}
+out1:
/* giveback the request */
dwc3_gadget_giveback(dep, req, -ECONNRESET);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bddc8fd9a7be..271ca161d7ef 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -185,7 +185,7 @@ config USB_FUSB300
config USB_OMAP
tristate "OMAP USB Device Controller"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP1
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
select USB_OTG_UTILS if ARCH_OMAP
help
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index 4c07ca9cebf3..7026919fc901 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -153,10 +153,10 @@ struct usb_ep_para{
#define USB_BUSMODE_DTB 0x02
/* Endpoint basic handle */
-#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF)
+#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF)
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
#define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
- USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
+ USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
& USB_DIR_IN) == USB_DIR_IN)
/* ep0 transfer state */
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
index 262acfd53e32..2ab0388d93eb 100644
--- a/drivers/usb/gadget/lpc32xx_udc.c
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -61,6 +61,7 @@
#include <mach/irqs.h>
#include <mach/board.h>
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+#include <linux/debugfs.h>
#include <linux/seq_file.h>
#endif
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index a460e8c204f4..89cbd2b22ab0 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -44,7 +44,8 @@
#include <asm/mach-types.h>
#include <plat/dma.h>
-#include <plat/usb.h>
+
+#include <mach/usb.h>
#include "omap_udc.h"
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index c46439c8dd74..5444866e13ef 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -294,7 +294,7 @@ static int bot_send_write_request(struct usbg_cmd *cmd)
pr_err("%s(%d)\n", __func__, __LINE__);
wait_for_completion(&cmd->write_complete);
- transport_generic_process_write(se_cmd);
+ target_execute_cmd(se_cmd);
cleanup:
return ret;
}
@@ -725,7 +725,7 @@ static int uasp_send_write_request(struct usbg_cmd *cmd)
}
wait_for_completion(&cmd->write_complete);
- transport_generic_process_write(se_cmd);
+ target_execute_cmd(se_cmd);
cleanup:
return ret;
}
@@ -1065,16 +1065,20 @@ static void usbg_cmd_work(struct work_struct *work)
tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo,
tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE,
cmd->prio_attr, cmd->sense_iu.sense);
-
- transport_send_check_condition_and_sense(se_cmd,
- TCM_UNSUPPORTED_SCSI_OPCODE, 1);
- usbg_cleanup_cmd(cmd);
- return;
+ goto out;
}
- target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
+ if (target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun,
- 0, cmd->prio_attr, dir, TARGET_SCF_UNKNOWN_SIZE);
+ 0, cmd->prio_attr, dir, TARGET_SCF_UNKNOWN_SIZE) < 0)
+ goto out;
+
+ return;
+
+out:
+ transport_send_check_condition_and_sense(se_cmd,
+ TCM_UNSUPPORTED_SCSI_OPCODE, 1);
+ usbg_cleanup_cmd(cmd);
}
static int usbg_submit_command(struct f_uas *fu,
@@ -1177,16 +1181,20 @@ static void bot_cmd_work(struct work_struct *work)
tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo,
tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE,
cmd->prio_attr, cmd->sense_iu.sense);
-
- transport_send_check_condition_and_sense(se_cmd,
- TCM_UNSUPPORTED_SCSI_OPCODE, 1);
- usbg_cleanup_cmd(cmd);
- return;
+ goto out;
}
- target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
+ if (target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun,
- cmd->data_len, cmd->prio_attr, dir, 0);
+ cmd->data_len, cmd->prio_attr, dir, 0) < 0)
+ goto out;
+
+ return;
+
+out:
+ transport_send_check_condition_and_sense(se_cmd,
+ TCM_UNSUPPORTED_SCSI_OPCODE, 1);
+ usbg_cleanup_cmd(cmd);
}
static int bot_submit_command(struct f_uas *fu,
@@ -1400,19 +1408,6 @@ static u32 usbg_tpg_get_inst_index(struct se_portal_group *se_tpg)
return 1;
}
-static int usbg_new_cmd(struct se_cmd *se_cmd)
-{
- struct usbg_cmd *cmd = container_of(se_cmd, struct usbg_cmd,
- se_cmd);
- int ret;
-
- ret = target_setup_cmd_from_cdb(se_cmd, cmd->cmd_buf);
- if (ret)
- return ret;
-
- return transport_generic_map_mem_to_cmd(se_cmd, NULL, 0, NULL, 0);
-}
-
static void usbg_cmd_release(struct kref *ref)
{
struct usbg_cmd *cmd = container_of(ref, struct usbg_cmd,
@@ -1902,7 +1897,6 @@ static struct target_core_fabric_ops usbg_ops = {
.tpg_alloc_fabric_acl = usbg_alloc_fabric_acl,
.tpg_release_fabric_acl = usbg_release_fabric_acl,
.tpg_get_inst_index = usbg_tpg_get_inst_index,
- .new_cmd_map = usbg_new_cmd,
.release_cmd = usbg_release_cmd,
.shutdown_session = usbg_shutdown_session,
.close_session = usbg_close_session,
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 83e58df29fe3..dcfaaa91a3fb 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -308,7 +308,7 @@ config USB_OHCI_HCD
config USB_OHCI_HCD_OMAP1
bool "OHCI support for OMAP1/2 chips"
- depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2)
+ depends on USB_OHCI_HCD && ARCH_OMAP1
default y
---help---
Enables support for the OHCI controller on OMAP1/2 chips.
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 17cfb8a1131c..c30435499a02 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -281,14 +281,13 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
}
+ /* Hold PHYs in reset while initializing EHCI controller */
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_request_one(pdata->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0);
if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_request_one(pdata->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0);
/* Hold the PHY in RESET for enough time till DIR is high */
udelay(10);
@@ -330,6 +329,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
ehci_reset(omap_ehci);
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (ret) {
+ dev_err(dev, "failed to add hcd with err %d\n", ret);
+ goto err_add_hcd;
+ }
if (pdata->phy_reset) {
/* Hold the PHY in RESET for enough time till
@@ -344,12 +348,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
}
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret) {
- dev_err(dev, "failed to add hcd with err %d\n", ret);
- goto err_add_hcd;
- }
-
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 9ce35d0d9d5d..b02c344e2cc9 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -20,14 +20,15 @@
#include <linux/clk.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <plat/mux.h>
-#include <mach/irqs.h>
#include <plat/fpga.h>
-#include <plat/usb.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/usb.h>
/* OMAP-1510 OHCI has its own MMU for DMA */
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 2732ef660c5c..7b01094d7993 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -462,6 +462,42 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
}
}
+/* Updates Link Status for super Speed port */
+static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+{
+ u32 pls = status_reg & PORT_PLS_MASK;
+
+ /* resume state is a xHCI internal state.
+ * Do not report it to usb core.
+ */
+ if (pls == XDEV_RESUME)
+ return;
+
+ /* When the CAS bit is set then warm reset
+ * should be performed on port
+ */
+ if (status_reg & PORT_CAS) {
+ /* The CAS bit can be set while the port is
+ * in any link state.
+ * Only roothubs have CAS bit, so we
+ * pretend to be in compliance mode
+ * unless we're already in compliance
+ * or the inactive state.
+ */
+ if (pls != USB_SS_PORT_LS_COMP_MOD &&
+ pls != USB_SS_PORT_LS_SS_INACTIVE) {
+ pls = USB_SS_PORT_LS_COMP_MOD;
+ }
+ /* Return also connection bit -
+ * hub state machine resets port
+ * when this bit is set.
+ */
+ pls |= USB_PORT_STAT_CONNECTION;
+ }
+ /* update status field */
+ *status |= pls;
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
@@ -606,13 +642,9 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
else
status |= USB_PORT_STAT_POWER;
}
- /* Port Link State */
+ /* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
- /* resume state is a xHCI internal state.
- * Do not report it to usb core.
- */
- if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
- status |= (temp & PORT_PLS_MASK);
+ xhci_hub_report_link_state(&status, temp);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 23b4aefd1036..8275645889da 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -885,6 +885,17 @@ static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci,
num_trbs_free_temp = ep_ring->num_trbs_free;
dequeue_temp = ep_ring->dequeue;
+ /* If we get two back-to-back stalls, and the first stalled transfer
+ * ends just before a link TRB, the dequeue pointer will be left on
+ * the link TRB by the code in the while loop. So we have to update
+ * the dequeue pointer one segment further, or we'll jump off
+ * the segment into la-la-land.
+ */
+ if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) {
+ ep_ring->deq_seg = ep_ring->deq_seg->next;
+ ep_ring->dequeue = ep_ring->deq_seg->trbs;
+ }
+
while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
/* We have more usable TRBs */
ep_ring->num_trbs_free++;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index de3d6e3e57be..55c0785810c9 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -341,7 +341,11 @@ struct xhci_op_regs {
#define PORT_PLC (1 << 22)
/* port configure error change - port failed to configure its link partner */
#define PORT_CEC (1 << 23)
-/* bit 24 reserved */
+/* Cold Attach Status - xHC can set this bit to report device attached during
+ * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * to connected state.
+ */
+#define PORT_CAS (1 << 24)
/* wake on connect (enable) */
#define PORT_WKCONN_E (1 << 25)
/* wake on disconnect (enable) */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index ef8d744800ac..e090c799d87b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -375,11 +375,21 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
*/
if (list_empty(&qh->hep->urb_list)) {
struct list_head *head;
+ struct dma_controller *dma = musb->dma_controller;
- if (is_in)
+ if (is_in) {
ep->rx_reinit = 1;
- else
+ if (ep->rx_channel) {
+ dma->channel_release(ep->rx_channel);
+ ep->rx_channel = NULL;
+ }
+ } else {
ep->tx_reinit = 1;
+ if (ep->tx_channel) {
+ dma->channel_release(ep->tx_channel);
+ ep->tx_channel = NULL;
+ }
+ }
/* Clobber old pointers to this qh */
musb_ep_set_qh(ep, is_in, NULL);
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 70cf5d7bca48..e0558dfcfafc 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -36,9 +36,9 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/usb.h>
#include <plat/mux.h>
+#include <mach/usb.h>
#ifndef DEBUG
#undef VERBOSE
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index d2a9a8e691b9..0eabb049b6a9 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -305,9 +305,8 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
regulator_enable(twl->usb3v3);
twl->asleep = 1;
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x10);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
status = USB_EVENT_ID;
otg->default_a = true;
twl->phy.state = OTG_STATE_A_IDLE;
@@ -316,12 +315,10 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
atomic_notifier_call_chain(&twl->phy.notifier, status,
otg->gadget);
} else {
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
- 0x10);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
}
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+ twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
return IRQ_HANDLED;
}
@@ -343,7 +340,7 @@ static int twl6030_enable_irq(struct usb_phy *x)
{
struct twl6030_usb *twl = phy_to_twl(x);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 3cfabcba7447..e7cf84f0751a 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -2,11 +2,11 @@
# Physical Layer USB driver configuration
#
comment "USB Physical Layer drivers"
- depends on USB
+ depends on USB || USB_GADGET
config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
- depends on USB
+ depends on USB || USB_GADGET
depends on I2C
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 73d25cd8cba5..1e71079ce33b 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -93,6 +93,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
@@ -134,7 +135,13 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+ { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+ { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
@@ -146,7 +153,11 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 81423f7361db..d47eb06fe463 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -222,14 +222,6 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
metro_priv->throttled = 0;
spin_unlock_irqrestore(&metro_priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Clear the urb pipe. */
usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e668a2460bd4..417ab1b0aa30 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -236,6 +236,7 @@ static void option_instat_callback(struct urb *urb);
#define NOVATELWIRELESS_PRODUCT_G1 0xA001
#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
+#define NOVATELWIRELESS_PRODUCT_MC551 0xB001
/* AMOI PRODUCTS */
#define AMOI_VENDOR_ID 0x1614
@@ -496,6 +497,19 @@ static void option_instat_callback(struct urb *urb);
/* MediaTek products */
#define MEDIATEK_VENDOR_ID 0x0e8d
+#define MEDIATEK_PRODUCT_DC_1COM 0x00a0
+#define MEDIATEK_PRODUCT_DC_4COM 0x00a5
+#define MEDIATEK_PRODUCT_DC_5COM 0x00a4
+#define MEDIATEK_PRODUCT_7208_1COM 0x7101
+#define MEDIATEK_PRODUCT_7208_2COM 0x7102
+#define MEDIATEK_PRODUCT_FP_1COM 0x0003
+#define MEDIATEK_PRODUCT_FP_2COM 0x0023
+#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043
+#define MEDIATEK_PRODUCT_FPDC_2COM 0x0033
+
+/* Cellient products */
+#define CELLIENT_VENDOR_ID 0x2692
+#define CELLIENT_PRODUCT_MEN200 0x9005
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
@@ -549,6 +563,10 @@ static const struct option_blacklist_info net_intf1_blacklist = {
.reserved = BIT(1),
};
+static const struct option_blacklist_info net_intf2_blacklist = {
+ .reserved = BIT(2),
+};
+
static const struct option_blacklist_info net_intf3_blacklist = {
.reserved = BIT(3),
};
@@ -734,6 +752,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
+ /* Novatel Ovation MC551 a.k.a. Verizon USB551L */
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -1092,6 +1112,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
@@ -1233,6 +1255,18 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_1COM, 0x02, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_2COM, 0x02, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a324a5d21e99..11418da9bc09 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -202,6 +202,12 @@ static int slave_configure(struct scsi_device *sdev)
if (us->fflags & US_FL_NO_READ_CAPACITY_16)
sdev->no_read_capacity_16 = 1;
+ /*
+ * Many devices do not respond properly to READ_CAPACITY_16.
+ * Tell the SCSI layer to try READ_CAPACITY_10 first.
+ */
+ sdev->try_rc_10_first = 1;
+
/* assume SPC3 or latter devices support sense size > 18 */
if (sdev->scsi_level > SCSI_SPC_2)
us->fflags |= US_FL_SANE_SENSE;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index caf22bf5f822..1719886bb9be 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1107,13 +1107,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
USB_SC_RBC, USB_PR_BULK, NULL,
0 ),
-/* Feiya QDI U2 DISK, reported by Hans de Goede <hdegoede@redhat.com> */
-UNUSUAL_DEV( 0x090c, 0x1000, 0x0000, 0xffff,
- "Feiya",
- "QDI U2 DISK",
- USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- US_FL_NO_READ_CAPACITY_16 ),
-
/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
"Feiya",
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.