diff options
Diffstat (limited to 'drivers/usb')
50 files changed, 551 insertions, 266 deletions
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 6ccbf60cdd5c..5a048b7b92e8 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -84,6 +84,12 @@ struct ci_hdrc_imx_data { struct imx_usbmisc_data *usbmisc_data; bool supports_runtime_pm; bool in_lpm; + /* SoC before i.mx6 (except imx23/imx28) needs three clks */ + bool need_three_clks; + struct clk *clk_ipg; + struct clk *clk_ahb; + struct clk *clk_per; + /* --------------------------------- */ }; /* Common functions shared by usbmisc drivers */ @@ -135,6 +141,102 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev) } /* End of common functions shared by usbmisc drivers*/ +static int imx_get_clks(struct device *dev) +{ + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret = 0; + + data->clk_ipg = devm_clk_get(dev, "ipg"); + if (IS_ERR(data->clk_ipg)) { + /* If the platform only needs one clocks */ + data->clk = devm_clk_get(dev, NULL); + if (IS_ERR(data->clk)) { + ret = PTR_ERR(data->clk); + dev_err(dev, + "Failed to get clks, err=%ld,%ld\n", + PTR_ERR(data->clk), PTR_ERR(data->clk_ipg)); + return ret; + } + return ret; + } + + data->clk_ahb = devm_clk_get(dev, "ahb"); + if (IS_ERR(data->clk_ahb)) { + ret = PTR_ERR(data->clk_ahb); + dev_err(dev, + "Failed to get ahb clock, err=%d\n", ret); + return ret; + } + + data->clk_per = devm_clk_get(dev, "per"); + if (IS_ERR(data->clk_per)) { + ret = PTR_ERR(data->clk_per); + dev_err(dev, + "Failed to get per clock, err=%d\n", ret); + return ret; + } + + data->need_three_clks = true; + return ret; +} + +static int imx_prepare_enable_clks(struct device *dev) +{ + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + int ret = 0; + + if (data->need_three_clks) { + ret = clk_prepare_enable(data->clk_ipg); + if (ret) { + dev_err(dev, + "Failed to prepare/enable ipg clk, err=%d\n", + ret); + return ret; + } + + ret = clk_prepare_enable(data->clk_ahb); + if (ret) { + dev_err(dev, + "Failed to prepare/enable ahb clk, err=%d\n", + ret); + clk_disable_unprepare(data->clk_ipg); + return ret; + } + + ret = clk_prepare_enable(data->clk_per); + if (ret) { + dev_err(dev, + "Failed to prepare/enable per clk, err=%d\n", + ret); + clk_disable_unprepare(data->clk_ahb); + clk_disable_unprepare(data->clk_ipg); + return ret; + } + } else { + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(dev, + "Failed to prepare/enable clk, err=%d\n", + ret); + return ret; + } + } + + return ret; +} + +static void imx_disable_unprepare_clks(struct device *dev) +{ + struct ci_hdrc_imx_data *data = dev_get_drvdata(dev); + + if (data->need_three_clks) { + clk_disable_unprepare(data->clk_per); + clk_disable_unprepare(data->clk_ahb); + clk_disable_unprepare(data->clk_ipg); + } else { + clk_disable_unprepare(data->clk); + } +} static int ci_hdrc_imx_probe(struct platform_device *pdev) { @@ -145,31 +247,31 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) .flags = CI_HDRC_SET_NON_ZERO_TTHA, }; int ret; - const struct of_device_id *of_id = - of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev); - const struct ci_hdrc_imx_platform_flag *imx_platform_flag = of_id->data; + const struct of_device_id *of_id; + const struct ci_hdrc_imx_platform_flag *imx_platform_flag; + + of_id = of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev); + if (!of_id) + return -ENODEV; + + imx_platform_flag = of_id->data; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; + platform_set_drvdata(pdev, data); data->usbmisc_data = usbmisc_get_init_data(&pdev->dev); if (IS_ERR(data->usbmisc_data)) return PTR_ERR(data->usbmisc_data); - data->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(data->clk)) { - dev_err(&pdev->dev, - "Failed to get clock, err=%ld\n", PTR_ERR(data->clk)); - return PTR_ERR(data->clk); - } + ret = imx_get_clks(&pdev->dev); + if (ret) + return ret; - ret = clk_prepare_enable(data->clk); - if (ret) { - dev_err(&pdev->dev, - "Failed to prepare or enable clock, err=%d\n", ret); + ret = imx_prepare_enable_clks(&pdev->dev); + if (ret) return ret; - } data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0); if (IS_ERR(data->phy)) { @@ -212,8 +314,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) goto disable_device; } - platform_set_drvdata(pdev, data); - if (data->supports_runtime_pm) { pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); @@ -226,7 +326,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) disable_device: ci_hdrc_remove_device(data->ci_pdev); err_clk: - clk_disable_unprepare(data->clk); + imx_disable_unprepare_clks(&pdev->dev); return ret; } @@ -240,7 +340,7 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev) pm_runtime_put_noidle(&pdev->dev); } ci_hdrc_remove_device(data->ci_pdev); - clk_disable_unprepare(data->clk); + imx_disable_unprepare_clks(&pdev->dev); return 0; } @@ -252,7 +352,7 @@ static int imx_controller_suspend(struct device *dev) dev_dbg(dev, "at %s\n", __func__); - clk_disable_unprepare(data->clk); + imx_disable_unprepare_clks(dev); data->in_lpm = true; return 0; @@ -270,7 +370,7 @@ static int imx_controller_resume(struct device *dev) return 0; } - ret = clk_prepare_enable(data->clk); + ret = imx_prepare_enable_clks(dev); if (ret) return ret; @@ -285,7 +385,7 @@ static int imx_controller_resume(struct device *dev) return 0; clk_disable: - clk_disable_unprepare(data->clk); + imx_disable_unprepare_clks(dev); return ret; } diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index 080b7be3daf0..58c8485a0715 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -322,8 +322,10 @@ static ssize_t ci_role_write(struct file *file, const char __user *ubuf, return -EINVAL; pm_runtime_get_sync(ci->dev); + disable_irq(ci->irq); ci_role_stop(ci); ret = ci_role_start(ci, role); + enable_irq(ci->irq); pm_runtime_put_sync(ci->dev); return ret ? ret : count; diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 8223fe73ea85..391a1225b0ba 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1751,6 +1751,22 @@ static int ci_udc_start(struct usb_gadget *gadget, return retval; } +static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci) +{ + if (!ci_otg_is_fsm_mode(ci)) + return; + + mutex_lock(&ci->fsm.lock); + if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) { + ci->fsm.a_bidl_adis_tmout = 1; + ci_hdrc_otg_fsm_start(ci); + } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) { + ci->fsm.protocol = PROTO_UNDEF; + ci->fsm.otg->state = OTG_STATE_UNDEFINED; + } + mutex_unlock(&ci->fsm.lock); +} + /** * ci_udc_stop: unregister a gadget driver */ @@ -1775,6 +1791,7 @@ static int ci_udc_stop(struct usb_gadget *gadget) ci->driver = NULL; spin_unlock_irqrestore(&ci->lock, flags); + ci_udc_stop_for_otg_fsm(ci); return 0; } diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index fcea4eb36eee..ab8b027e8cc8 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -500,7 +500,11 @@ static int usbmisc_imx_probe(struct platform_device *pdev) { struct resource *res; struct imx_usbmisc *data; - struct of_device_id *tmp_dev; + const struct of_device_id *of_id; + + of_id = of_match_device(usbmisc_imx_dt_ids, &pdev->dev); + if (!of_id) + return -ENODEV; data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -513,9 +517,7 @@ static int usbmisc_imx_probe(struct platform_device *pdev) if (IS_ERR(data->base)) return PTR_ERR(data->base); - tmp_dev = (struct of_device_id *) - of_match_device(usbmisc_imx_dt_ids, &pdev->dev); - data->ops = (const struct usbmisc_ops *)tmp_dev->data; + data->ops = (const struct usbmisc_ops *)of_id->data; platform_set_drvdata(pdev, data); return 0; diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index b30e7423549b..26ca4f910cb0 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1838,6 +1838,11 @@ static const struct usb_device_id acm_ids[] = { }, #endif + /* Exclude Infineon Flash Loader utility */ + { USB_DEVICE(0x058b, 0x0041), + .driver_info = IGNORE_DEVICE, + }, + /* control interfaces without any protocol set */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_PROTO_NONE) }, diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 433bbc34a8a4..071964c7847f 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -884,11 +884,11 @@ static int usblp_wwait(struct usblp *usblp, int nonblock) add_wait_queue(&usblp->wwait, &waita); for (;;) { - set_current_state(TASK_INTERRUPTIBLE); if (mutex_lock_interruptible(&usblp->mut)) { rc = -EINTR; break; } + set_current_state(TASK_INTERRUPTIBLE); rc = usblp_wtest(usblp, nonblock); mutex_unlock(&usblp->mut); if (rc <= 0) diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index a99c89e78126..dd280108758f 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -77,8 +77,7 @@ config USB_OTG_BLACKLIST_HUB config USB_OTG_FSM tristate "USB 2.0 OTG FSM implementation" - depends on USB - select USB_OTG + depends on USB && USB_OTG select USB_PHY help Implements OTG Finite State Machine as specified in On-The-Go diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 7caff020106e..5050760f5e17 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -115,7 +115,8 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, USB_SS_MULT(desc->bmAttributes) > 3) { dev_warn(ddev, "Isoc endpoint has Mult of %d in " "config %d interface %d altsetting %d ep %d: " - "setting to 3\n", desc->bmAttributes + 1, + "setting to 3\n", + USB_SS_MULT(desc->bmAttributes), cfgno, inum, asnum, ep->desc.bEndpointAddress); ep->ss_ep_comp.bmAttributes = 2; } diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 2a3bbdf7eb94..cffa0a0d7de2 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -661,32 +661,8 @@ static unsigned int usb_device_poll(struct file *file, return 0; } -static loff_t usb_device_lseek(struct file *file, loff_t offset, int orig) -{ - loff_t ret; - - mutex_lock(&file_inode(file)->i_mutex); - - switch (orig) { - case 0: - file->f_pos = offset; - ret = file->f_pos; - break; - case 1: - file->f_pos += offset; - ret = file->f_pos; - break; - case 2: - default: - ret = -EINVAL; - } - - mutex_unlock(&file_inode(file)->i_mutex); - return ret; -} - const struct file_operations usbfs_devices_fops = { - .llseek = usb_device_lseek, + .llseek = no_seek_end_llseek, .read = usb_device_read, .poll = usb_device_poll, }; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 38ae877c46e3..dbc3e143453a 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -157,30 +157,6 @@ static int connected(struct usb_dev_state *ps) ps->dev->state != USB_STATE_NOTATTACHED); } -static loff_t usbdev_lseek(struct file *file, loff_t offset, int orig) -{ - loff_t ret; - - mutex_lock(&file_inode(file)->i_mutex); - - switch (orig) { - case 0: - file->f_pos = offset; - ret = file->f_pos; - break; - case 1: - file->f_pos += offset; - ret = file->f_pos; - break; - case 2: - default: - ret = -EINVAL; - } - - mutex_unlock(&file_inode(file)->i_mutex); - return ret; -} - static ssize_t usbdev_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) { @@ -2366,7 +2342,7 @@ static unsigned int usbdev_poll(struct file *file, const struct file_operations usbdev_file_operations = { .owner = THIS_MODULE, - .llseek = usbdev_lseek, + .llseek = no_seek_end_llseek, .read = usbdev_read, .poll = usbdev_poll, .unlocked_ioctl = usbdev_ioctl, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bdeadc112d29..ddbf32d599cb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -124,6 +124,10 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev) int usb_device_supports_lpm(struct usb_device *udev) { + /* Some devices have trouble with LPM */ + if (udev->quirks & USB_QUIRK_NO_LPM) + return 0; + /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. */ @@ -1031,10 +1035,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) unsigned delay; /* Continue a partial initialization */ - if (type == HUB_INIT2) - goto init2; - if (type == HUB_INIT3) + if (type == HUB_INIT2 || type == HUB_INIT3) { + device_lock(hub->intfdev); + + /* Was the hub disconnected while we were waiting? */ + if (hub->disconnected) { + device_unlock(hub->intfdev); + kref_put(&hub->kref, hub_release); + return; + } + if (type == HUB_INIT2) + goto init2; goto init3; + } + kref_get(&hub->kref); /* The superspeed hub except for root hub has to use Hub Depth * value as an offset into the route string to locate the bits @@ -1232,6 +1246,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) queue_delayed_work(system_power_efficient_wq, &hub->init_work, msecs_to_jiffies(delay)); + device_unlock(hub->intfdev); return; /* Continues at init3: below */ } else { msleep(delay); @@ -1253,6 +1268,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Allow autosuspend if it was suppressed */ if (type <= HUB_INIT3) usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); + + if (type == HUB_INIT2 || type == HUB_INIT3) + device_unlock(hub->intfdev); + + kref_put(&hub->kref, hub_release); } /* Implement the continuations for the delays above */ @@ -4512,6 +4532,8 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, goto fail; } + usb_detect_quirks(udev); + if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) { retval = usb_get_bos_descriptor(udev); if (!retval) { @@ -4710,7 +4732,6 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, if (status < 0) goto loop; - usb_detect_quirks(udev); if (udev->quirks & USB_QUIRK_DELAY_INIT) msleep(1000); @@ -5326,9 +5347,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (udev->usb2_hw_lpm_enabled == 1) usb_set_usb2_hardware_lpm(udev, 0); - bos = udev->bos; - udev->bos = NULL; - /* Disable LPM and LTM while we reset the device and reinstall the alt * settings. Device-initiated LPM settings, and system exit latency * settings are cleared when the device is reset, so we have to set @@ -5337,15 +5355,18 @@ static int usb_reset_and_verify_device(struct usb_device *udev) ret = usb_unlocked_disable_lpm(udev); if (ret) { dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__); - goto re_enumerate; + goto re_enumerate_no_bos; } ret = usb_disable_ltm(udev); if (ret) { dev_err(&udev->dev, "%s Failed to disable LTM\n.", __func__); - goto re_enumerate; + goto re_enumerate_no_bos; } + bos = udev->bos; + udev->bos = NULL; + for (i = 0; i < SET_CONFIG_TRIES; ++i) { /* ep0 maxpacket size may change; let the HCD know about it. @@ -5442,10 +5463,11 @@ done: return 0; re_enumerate: - /* LPM state doesn't matter when we're about to destroy the device. */ - hub_port_logical_disconnect(parent_hub, port1); usb_release_bos_descriptor(udev); udev->bos = bos; +re_enumerate_no_bos: + /* LPM state doesn't matter when we're about to destroy the device. */ + hub_port_logical_disconnect(parent_hub, port1); return -ENODEV; } diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 210618319f10..5487fe308f01 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -206,7 +206,7 @@ static int link_peers(struct usb_port *left, struct usb_port *right) else method = "default"; - pr_warn("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n", + pr_debug("usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\n", dev_name(&left->dev), dev_name(&right->dev), method, dev_name(&left->dev), lpeer ? dev_name(&lpeer->dev) : "none", @@ -265,7 +265,7 @@ static void link_peers_report(struct usb_port *left, struct usb_port *right) if (rc == 0) { dev_dbg(&left->dev, "peered to %s\n", dev_name(&right->dev)); } else { - dev_warn(&left->dev, "failed to peer to %s (%d)\n", + dev_dbg(&left->dev, "failed to peer to %s (%d)\n", dev_name(&right->dev), rc); pr_warn_once("usb: port power management may be unreliable\n"); usb_port_block_power_off = 1; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f5a381945db2..6dc810bce295 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -125,6 +125,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04f3, 0x016f), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, + { USB_DEVICE(0x04f3, 0x21b8), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -199,6 +202,12 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Blackmagic Design Intensity Shuttle */ + { USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM }, + + /* Blackmagic Design UltraStudio SDI */ + { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + { } /* terminating entry must be last */ }; diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index e79baf73c234..571c21727ff9 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -324,12 +324,13 @@ void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) */ static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) { - if (hsotg->lx_state == DWC2_L2) { + if (hsotg->bus_suspended) { hsotg->flags.b.port_suspend_change = 1; usb_hcd_resume_root_hub(hsotg->priv); - } else { - hsotg->flags.b.port_l1_change = 1; } + + if (hsotg->lx_state == DWC2_L1) + hsotg->flags.b.port_l1_change = 1; } /** @@ -1428,8 +1429,8 @@ static void dwc2_wakeup_detected(unsigned long data) dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", dwc2_readl(hsotg->regs + HPRT0)); - hsotg->bus_suspended = 0; dwc2_hcd_rem_wakeup(hsotg); + hsotg->bus_suspended = 0; /* Change to L0 state */ hsotg->lx_state = DWC2_L0; diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 5859b0fa19ee..39c1cbf0e75d 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -108,7 +108,8 @@ static const struct dwc2_core_params params_rk3066 = { .host_ls_low_power_phy_clk = -1, .ts_dline = -1, .reload_ctl = -1, - .ahbcfg = 0x7, /* INCR16 */ + .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT, .uframe_sched = -1, .external_id_pin_ctl = -1, .hibernation = -1, @@ -124,9 +125,11 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) if (ret) return ret; - ret = clk_prepare_enable(hsotg->clk); - if (ret) - return ret; + if (hsotg->clk) { + ret = clk_prepare_enable(hsotg->clk); + if (ret) + return ret; + } if (hsotg->uphy) ret = usb_phy_init(hsotg->uphy); @@ -174,7 +177,8 @@ static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) if (ret) return ret; - clk_disable_unprepare(hsotg->clk); + if (hsotg->clk) + clk_disable_unprepare(hsotg->clk); ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); @@ -211,14 +215,41 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) */ hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy"); if (IS_ERR(hsotg->phy)) { - hsotg->phy = NULL; + ret = PTR_ERR(hsotg->phy); + switch (ret) { + case -ENODEV: + case -ENOSYS: + hsotg->phy = NULL; + break; + case -EPROBE_DEFER: + return ret; + default: + dev_err(hsotg->dev, "error getting phy %d\n", ret); + return ret; + } + } + + if (!hsotg->phy) { hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2); - if (IS_ERR(hsotg->uphy)) - hsotg->uphy = NULL; - else - hsotg->plat = dev_get_platdata(hsotg->dev); + if (IS_ERR(hsotg->uphy)) { + ret = PTR_ERR(hsotg->uphy); + switch (ret) { + case -ENODEV: + case -ENXIO: + hsotg->uphy = NULL; + break; + case -EPROBE_DEFER: + return ret; + default: + dev_err(hsotg->dev, "error getting usb phy %d\n", + ret); + return ret; + } + } } + hsotg->plat = dev_get_platdata(hsotg->dev); + if (hsotg->phy) { /* * If using the generic PHY framework, check if the PHY bus @@ -228,11 +259,6 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) hsotg->phyif = GUSBCFG_PHYIF8; } - if (!hsotg->phy && !hsotg->uphy && !hsotg->plat) { - dev_err(hsotg->dev, "no platform data or transceiver defined\n"); - return -EPROBE_DEFER; - } - /* Clock */ hsotg->clk = devm_clk_get(hsotg->dev, "otg"); if (IS_ERR(hsotg->clk)) { @@ -341,20 +367,6 @@ static int dwc2_driver_probe(struct platform_device *dev) if (retval) return retval; - irq = platform_get_irq(dev, 0); - if (irq < 0) { - dev_err(&dev->dev, "missing IRQ resource\n"); - return irq; - } - - dev_dbg(hsotg->dev, "registering common handler for irq%d\n", - irq); - retval = devm_request_irq(hsotg->dev, irq, - dwc2_handle_common_intr, IRQF_SHARED, - dev_name(hsotg->dev), hsotg); - if (retval) - return retval; - res = platform_get_resource(dev, IORESOURCE_MEM, 0); hsotg->regs = devm_ioremap_resource(&dev->dev, res); if (IS_ERR(hsotg->regs)) @@ -389,6 +401,20 @@ static int dwc2_driver_probe(struct platform_device *dev) dwc2_set_all_params(hsotg->core_params, -1); + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "missing IRQ resource\n"); + return irq; + } + + dev_dbg(hsotg->dev, "registering common handler for irq%d\n", + irq); + retval = devm_request_irq(hsotg->dev, irq, + dwc2_handle_common_intr, IRQF_SHARED, + dev_name(hsotg->dev), hsotg); + if (retval) + return retval; + retval = dwc2_lowlevel_hw_enable(hsotg); if (retval) return retval; diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 77a622cb48ab..009d83048c8c 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -34,6 +34,8 @@ #define PCI_DEVICE_ID_INTEL_BSW 0x22b7 #define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30 #define PCI_DEVICE_ID_INTEL_SPTH 0xa130 +#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa +#define PCI_DEVICE_ID_INTEL_APL 0x5aaa static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; static const struct acpi_gpio_params cs_gpios = { 1, 0, false }; @@ -210,6 +212,8 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 55ba447fdf8b..a58376fd65fe 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1078,6 +1078,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) * little bit faster. */ if (!usb_endpoint_xfer_isoc(dep->endpoint.desc) && + !usb_endpoint_xfer_int(dep->endpoint.desc) && !(dep->flags & DWC3_EP_BUSY)) { ret = __dwc3_gadget_kick_transfer(dep, 0, true); goto out; @@ -2744,12 +2745,34 @@ int dwc3_gadget_init(struct dwc3 *dwc) } dwc->gadget.ops = &dwc3_gadget_ops; - dwc->gadget.max_speed = USB_SPEED_SUPER; dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->gadget.sg_supported = true; dwc->gadget.name = "dwc3-gadget"; /* + * FIXME We might be setting max_speed to <SUPER, however versions + * <2.20a of dwc3 have an issue with metastability (documented + * elsewhere in this driver) which tells us we can't set max speed to + * anything lower than SUPER. + * + * Because gadget.max_speed is only used by composite.c and function + * drivers (i.e. it won't go into dwc3's registers) we are allowing this + * to happen so we avoid sending SuperSpeed Capability descriptor + * together with our BOS descriptor as that could confuse host into + * thinking we can handle super speed. + * + * Note that, in fact, we won't even support GetBOS requests when speed + * is less than super speed because we don't have means, yet, to tell + * composite.c that we are USB 2.0 + LPM ECN. + */ + if (dwc->revision < DWC3_REVISION_220A) + dwc3_trace(trace_dwc3_gadget, + "Changing max_speed on rev %08x\n", + dwc->revision); + + dwc->gadget.max_speed = dwc->maximum_speed; + + /* * Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize * on ep out. */ diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index adc6d52efa46..cf43e9e18368 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -423,7 +423,7 @@ static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf, spin_unlock_irq(&ffs->ev.waitq.lock); mutex_unlock(&ffs->mutex); - return unlikely(__copy_to_user(buf, events, size)) ? -EFAULT : size; + return unlikely(copy_to_user(buf, events, size)) ? -EFAULT : size; } static ssize_t ffs_ep0_read(struct file *file, char __user *buf, @@ -513,7 +513,7 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf, /* unlocks spinlock */ ret = __ffs_ep0_queue_wait(ffs, data, len); - if (likely(ret > 0) && unlikely(__copy_to_user(buf, data, len))) + if (likely(ret > 0) && unlikely(copy_to_user(buf, data, len))) ret = -EFAULT; goto done_mutex; @@ -3493,7 +3493,7 @@ static char *ffs_prepare_buffer(const char __user *buf, size_t len) if (unlikely(!data)) return ERR_PTR(-ENOMEM); - if (unlikely(__copy_from_user(data, buf, len))) { + if (unlikely(copy_from_user(data, buf, len))) { kfree(data); return ERR_PTR(-EFAULT); } diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c index 23933bdf2d9d..ddc3aad886b7 100644 --- a/drivers/usb/gadget/function/f_loopback.c +++ b/drivers/usb/gadget/function/f_loopback.c @@ -329,7 +329,7 @@ static int alloc_requests(struct usb_composite_dev *cdev, for (i = 0; i < loop->qlen && result == 0; i++) { result = -ENOMEM; - in_req = usb_ep_alloc_request(loop->in_ep, GFP_KERNEL); + in_req = usb_ep_alloc_request(loop->in_ep, GFP_ATOMIC); if (!in_req) goto fail; diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 42acb45e1ab4..898a570319f1 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -370,6 +370,7 @@ static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt) if (err) { ERROR(midi, "%s queue req: %d\n", midi->out_ep->name, err); + free_ep_req(midi->out_ep, req); } } @@ -545,7 +546,7 @@ static void f_midi_transmit(struct f_midi *midi, struct usb_request *req) } } - if (req->length > 0) { + if (req->length > 0 && ep->enabled) { int err; err = usb_ep_queue(ep, req, GFP_ATOMIC); diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c index 289ebca316d3..ad8c9b05572d 100644 --- a/drivers/usb/gadget/function/uvc_configfs.c +++ b/drivers/usb/gadget/function/uvc_configfs.c @@ -20,7 +20,7 @@ #define UVC_ATTR(prefix, cname, aname) \ static struct configfs_attribute prefix##attr_##cname = { \ .ca_name = __stringify(aname), \ - .ca_mode = S_IRUGO, \ + .ca_mode = S_IRUGO | S_IWUGO, \ .ca_owner = THIS_MODULE, \ .show = prefix##cname##_show, \ .store = prefix##cname##_store, \ diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c index 51d4a1703af2..912694f3d54e 100644 --- a/drivers/usb/gadget/function/uvc_queue.c +++ b/drivers/usb/gadget/function/uvc_queue.c @@ -41,7 +41,7 @@ * videobuf2 queue operations */ -static int uvc_queue_setup(struct vb2_queue *vq, const void *parg, +static int uvc_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, unsigned int *nplanes, unsigned int sizes[], void *alloc_ctxs[]) { @@ -329,7 +329,7 @@ struct uvc_buffer *uvcg_queue_next_buffer(struct uvc_video_queue *queue, buf->buf.field = V4L2_FIELD_NONE; buf->buf.sequence = queue->sequence++; - v4l2_get_timestamp(&buf->buf.timestamp); + buf->buf.vb2_buf.timestamp = ktime_get_ns(); vb2_set_plane_payload(&buf->buf.vb2_buf, 0, buf->bytesused); vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_DONE); diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index f0f2b066ac08..f92f5aff0dd5 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1633,7 +1633,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) spin_lock(&udc->lock); int_enb = usba_int_enb_get(udc); - status = usba_readl(udc, INT_STA) & int_enb; + status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED); DBG(DBG_INT, "irq, status=%#08x\n", status); if (status & USBA_DET_SUSPEND) { diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index 670ac0b12f00..001a3b74a993 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -2536,6 +2536,9 @@ static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state) udc->pullup_resume = udc->pullup_on; dplus_pullup(udc, 0); + if (udc->driver) + udc->driver->disconnect(&udc->gadget); + return 0; } diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 342ffd140122..8c6e15bd6ff0 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -473,6 +473,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) if (!pdata) return -ENOMEM; + pdev->dev.platform_data = pdata; + if (!of_property_read_u32(np, "num-ports", &ports)) pdata->ports = ports; @@ -483,6 +485,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) */ if (i >= pdata->ports) { pdata->vbus_pin[i] = -EINVAL; + pdata->overcurrent_pin[i] = -EINVAL; continue; } @@ -513,10 +516,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) } at91_for_each_port(i) { - if (i >= pdata->ports) { - pdata->overcurrent_pin[i] = -EINVAL; - continue; - } + if (i >= pdata->ports) + break; pdata->overcurrent_pin[i] = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); @@ -552,8 +553,6 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) } } - pdev->dev.platform_data = pdata; - device_init_wakeup(&pdev->dev, 1); return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); } diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 1b28a000d5c6..9c6635d43db0 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -584,27 +584,8 @@ static int uhci_debug_open(struct inode *inode, struct file *file) static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence) { - struct uhci_debug *up; - loff_t new = -1; - - up = file->private_data; - - /* - * XXX: atomic 64bit seek access, but that needs to be fixed in the VFS - */ - switch (whence) { - case 0: - new = off; - break; - case 1: - new = file->f_pos + off; - break; - } - - if (new < 0 || new > up->size) - return -EINVAL; - - return (file->f_pos = new); + struct uhci_debug *up = file->private_data; + return no_seek_end_llseek_size(file, off, whence, up->size); } static ssize_t uhci_debug_read(struct file *file, char __user *buf, diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index dc31c425ce01..9f1c0538b211 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -377,6 +377,10 @@ static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_f if (std->pl_virt == NULL) return -ENOMEM; std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE); + if (dma_mapping_error(whc->wusbhc.dev, std->dma_addr)) { + kfree(std->pl_virt); + return -EFAULT; + } for (p = 0; p < std->num_pointers; p++) { std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 5d2d7e954bd4..f980c239eded 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -733,8 +733,30 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, if ((raw_port_status & PORT_RESET) || !(raw_port_status & PORT_PE)) return 0xffffffff; - if (time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { + /* did port event handler already start resume timing? */ + if (!bus_state->resume_done[wIndex]) { + /* If not, maybe we are in a host initated resume? */ + if (test_bit(wIndex, &bus_state->resuming_ports)) { + /* Host initated resume doesn't time the resume + * signalling using resume_done[]. + * It manually sets RESUME state, sleeps 20ms + * and sets U0 state. This should probably be + * changed, but not right now. + */ + } else { + /* port resume was discovered now and here, + * start resume timing + */ + unsigned long timeout = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + + set_bit(wIndex, &bus_state->resuming_ports); + bus_state->resume_done[wIndex] = timeout; + mod_timer(&hcd->rh_timer, timeout); + } + /* Has resume been signalled for USB_RESUME_TIME yet? */ + } else if (time_after_eq(jiffies, + bus_state->resume_done[wIndex])) { int time_left; xhci_dbg(xhci, "Resume USB2 port %d\n", @@ -775,19 +797,35 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, } else { /* * The resume has been signaling for less than - * 20ms. Report the port status as SUSPEND, - * let the usbcore check port status again - * and clear resume signaling later. + * USB_RESUME_TIME. Report the port status as SUSPEND, + * let the usbcore check port status again and clear + * resume signaling later. */ status |= USB_PORT_STAT_SUSPEND; } } - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 - && (raw_port_status & PORT_POWER) - && (bus_state->suspended_ports & (1 << wIndex))) { - bus_state->suspended_ports &= ~(1 << wIndex); - if (hcd->speed < HCD_USB3) - bus_state->port_c_suspend |= 1 << wIndex; + /* + * Clear stale usb2 resume signalling variables in case port changed + * state during resume signalling. For example on error + */ + if ((bus_state->resume_done[wIndex] || + test_bit(wIndex, &bus_state->resuming_ports)) && + (raw_port_status & PORT_PLS_MASK) != XDEV_U3 && + (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) { + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); + } + + + if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 && + (raw_port_status & PORT_POWER)) { + if (bus_state->suspended_ports & (1 << wIndex)) { + bus_state->suspended_ports &= ~(1 << wIndex); + if (hcd->speed < HCD_USB3) + bus_state->port_c_suspend |= 1 << wIndex; + } + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); } if (raw_port_status & PORT_CONNECT) { status |= USB_PORT_STAT_CONNECTION; @@ -1112,6 +1150,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if ((temp & PORT_PE) == 0) goto error; + set_bit(wIndex, &bus_state->resuming_ports); xhci_set_link_state(xhci, port_array, wIndex, XDEV_RESUME); spin_unlock_irqrestore(&xhci->lock, flags); @@ -1119,6 +1158,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, spin_lock_irqsave(&xhci->lock, flags); xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); + clear_bit(wIndex, &bus_state->resuming_ports); } bus_state->port_c_suspend |= 1 << wIndex; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 17f6897acde2..c62109091d12 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -188,10 +188,14 @@ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) 0xb7, 0x0c, 0x34, 0xac, 0x01, 0xe9, 0xbf, 0x45, 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23, }; - acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, NULL); + union acpi_object *obj; + + obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1, + NULL); + ACPI_FREE(obj); } #else - static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } +static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } #endif /* CONFIG_ACPI */ /* called during probe() after chip reset completes */ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fa836251ca21..eeaa6c6bd540 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1583,7 +1583,8 @@ static void handle_port_status(struct xhci_hcd *xhci, */ bogus_port_status = true; goto cleanup; - } else { + } else if (!test_bit(faked_port_index, + &bus_state->resuming_ports)) { xhci_dbg(xhci, "resume HS port %d\n", port_id); bus_state->resume_done[faked_port_index] = jiffies + msecs_to_jiffies(USB_RESUME_TIMEOUT); @@ -3896,28 +3897,6 @@ cleanup: return ret; } -static int ep_ring_is_processing(struct xhci_hcd *xhci, - int slot_id, unsigned int ep_index) -{ - struct xhci_virt_device *xdev; - struct xhci_ring *ep_ring; - struct xhci_ep_ctx *ep_ctx; - struct xhci_virt_ep *xep; - dma_addr_t hw_deq; - - xdev = xhci->devs[slot_id]; - xep = &xhci->devs[slot_id]->eps[ep_index]; - ep_ring = xep->ring; - ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); - - if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) != EP_STATE_RUNNING) - return 0; - - hw_deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK; - return (hw_deq != - xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue)); -} - /* * Check transfer ring to guarantee there is enough room for the urb. * Update ISO URB start_frame and interval. @@ -3983,10 +3962,12 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, } /* Calculate the start frame and put it in urb->start_frame. */ - if (HCC_CFC(xhci->hcc_params) && - ep_ring_is_processing(xhci, slot_id, ep_index)) { - urb->start_frame = xep->next_frame_id; - goto skip_start_over; + if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) { + if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) == + EP_STATE_RUNNING) { + urb->start_frame = xep->next_frame_id; + goto skip_start_over; + } } start_frame = readl(&xhci->run_regs->microframe_index); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6e7dc6f93978..3f912705dcef 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -175,6 +175,16 @@ int xhci_reset(struct xhci_hcd *xhci) command |= CMD_RESET; writel(command, &xhci->op_regs->command); + /* Existing Intel xHCI controllers require a delay of 1 mS, + * after setting the CMD_RESET bit, and before accessing any + * HC registers. This allows the HC to complete the + * reset operation and be ready for HC register access. + * Without this delay, the subsequent HC register access, + * may result in a system hang very rarely. + */ + if (xhci->quirks & XHCI_INTEL_HOST) + udelay(1000); + ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, 10 * 1000 * 1000); if (ret) @@ -4768,8 +4778,16 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx); slot_ctx->dev_info |= cpu_to_le32(DEV_HUB); + /* + * refer to section 6.2.2: MTT should be 0 for full speed hub, + * but it may be already set to 1 when setup an xHCI virtual + * device, so clear it anyway. + */ if (tt->multi) slot_ctx->dev_info |= cpu_to_le32(DEV_MTT); + else if (hdev->speed == USB_SPEED_FULL) + slot_ctx->dev_info &= cpu_to_le32(~DEV_MTT); + if (xhci->hci_version > 0x95) { xhci_dbg(xhci, "xHCI version %x needs hub " "TT think time and number of ports\n", diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 306d6852ebc7..8efbabacc84e 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2825,21 +2825,7 @@ sisusb_lseek(struct file *file, loff_t offset, int orig) return -ENODEV; } - switch (orig) { - case 0: - file->f_pos = offset; - ret = file->f_pos; - /* never negative, no force_successful_syscall needed */ - break; - case 1: - file->f_pos += offset; - ret = file->f_pos; - /* never negative, no force_successful_syscall needed */ - break; - default: - /* seeking relative to "end of file" is not supported */ - ret = -EINVAL; - } + ret = no_seek_end_llseek(file, offset, orig); mutex_unlock(&sisusb->lock); return ret; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 1f2037bbeb0d..45c83baf675d 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -159,7 +159,7 @@ config USB_TI_CPPI_DMA config USB_TI_CPPI41_DMA bool 'TI CPPI 4.1 (AM335x)' - depends on ARCH_OMAP + depends on ARCH_OMAP && DMADEVICES select TI_CPPI41 config USB_TUSB_OMAP_DMA diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index ba13529cbd52..ee9ff7028b92 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -132,7 +132,7 @@ static inline struct musb *dev_to_musb(struct device *dev) /*-------------------------------------------------------------------------*/ #ifndef CONFIG_BLACKFIN -static int musb_ulpi_read(struct usb_phy *phy, u32 offset) +static int musb_ulpi_read(struct usb_phy *phy, u32 reg) { void __iomem *addr = phy->io_priv; int i = 0; @@ -151,7 +151,7 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset) * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM. */ - musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset); + musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg); musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR); @@ -176,7 +176,7 @@ out: return ret; } -static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) +static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg) { void __iomem *addr = phy->io_priv; int i = 0; @@ -191,8 +191,8 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) power &= ~MUSB_POWER_SUSPENDM; musb_writeb(addr, MUSB_POWER, power); - musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset); - musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data); + musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg); + musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val); musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ); while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL) @@ -1668,7 +1668,7 @@ EXPORT_SYMBOL_GPL(musb_interrupt); static bool use_dma = 1; /* "modprobe ... use_dma=0" etc */ -module_param(use_dma, bool, 0); +module_param(use_dma, bool, 0644); MODULE_PARM_DESC(use_dma, "enable/disable use of DMA"); void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit) @@ -2017,7 +2017,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) /* We need musb_read/write functions initialized for PM */ pm_runtime_use_autosuspend(musb->controller); pm_runtime_set_autosuspend_delay(musb->controller, 200); - pm_runtime_irq_safe(musb->controller); pm_runtime_enable(musb->controller); /* The musb_platform_init() call: @@ -2095,6 +2094,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) #ifndef CONFIG_MUSB_PIO_ONLY if (!musb->ops->dma_init || !musb->ops->dma_exit) { dev_err(dev, "DMA controller not set\n"); + status = -ENODEV; goto fail2; } musb_dma_controller_create = musb->ops->dma_init; @@ -2218,6 +2218,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) pm_runtime_put(musb->controller); + /* + * For why this is currently needed, see commit 3e43a0725637 + * ("usb: musb: core: add pm_runtime_irq_safe()") + */ + pm_runtime_irq_safe(musb->controller); + return 0; fail5: diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 26c65e66cc0f..795a45b1b25b 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -112,22 +112,32 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) struct musb *musb = ep->musb; void __iomem *epio = ep->regs; u16 csr; - u16 lastcsr = 0; int retries = 1000; csr = musb_readw(epio, MUSB_TXCSR); while (csr & MUSB_TXCSR_FIFONOTEMPTY) { - if (csr != lastcsr) - dev_dbg(musb->controller, "Host TX FIFONOTEMPTY csr: %02x\n", csr); - lastcsr = csr; csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_TXPKTRDY; musb_writew(epio, MUSB_TXCSR, csr); csr = musb_readw(epio, MUSB_TXCSR); - if (WARN(retries-- < 1, + + /* + * FIXME: sometimes the tx fifo flush failed, it has been + * observed during device disconnect on AM335x. + * + * To reproduce the issue, ensure tx urb(s) are queued when + * unplug the usb device which is connected to AM335x usb + * host port. + * + * I found using a usb-ethernet device and running iperf + * (client on AM335x) has very high chance to trigger it. + * + * Better to turn on dev_dbg() in musb_cleanup_urb() with + * CPPI enabled to see the issue when aborting the tx channel. + */ + if (dev_WARN_ONCE(musb->controller, retries-- < 1, "Could not flush host TX%d fifo: csr: %04x\n", ep->epnum, csr)) return; - mdelay(1); } } diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 173132416170..22e8ecb6bfbd 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -21,7 +21,6 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM - select USB_OTG select USB_PHY help Enable this to support Freescale USB OTG transceiver. @@ -168,8 +167,7 @@ config USB_QCOM_8X16_PHY config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_EHCI_MV && USB_MV_UDC && PM - select USB_OTG + depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG select USB_PHY help Say Y here if you want to build Marvell USB OTG transciever diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 80eb991c2506..0d19a6d61a71 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1506,7 +1506,6 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) { struct msm_otg_platform_data *pdata; struct extcon_dev *ext_id, *ext_vbus; - const struct of_device_id *id; struct device_node *node = pdev->dev.of_node; struct property *prop; int len, ret, words; @@ -1518,8 +1517,9 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->pdata = pdata; - id = of_match_device(msm_otg_dt_match, &pdev->dev); - pdata->phy_type = (enum msm_usb_phy_type) id->data; + pdata->phy_type = (enum msm_usb_phy_type)of_device_get_match_data(&pdev->dev); + if (!pdata->phy_type) + return 1; motg->link_rst = devm_reset_control_get(&pdev->dev, "link"); if (IS_ERR(motg->link_rst)) diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 4d863ebc117c..c2936dc48ca7 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -143,12 +143,17 @@ static const struct mxs_phy_data imx6sx_phy_data = { .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, }; +static const struct mxs_phy_data imx6ul_phy_data = { + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, +}; + static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, }, { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, + { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); @@ -452,10 +457,13 @@ static int mxs_phy_probe(struct platform_device *pdev) struct clk *clk; struct mxs_phy *mxs_phy; int ret; - const struct of_device_id *of_id = - of_match_device(mxs_phy_dt_ids, &pdev->dev); + const struct of_device_id *of_id; struct device_node *np = pdev->dev.of_node; + of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev); + if (!of_id) + return -ENODEV; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c index 1270906ccb95..c4bf2de6d14e 100644 --- a/drivers/usb/phy/phy-omap-otg.c +++ b/drivers/usb/phy/phy-omap-otg.c @@ -105,7 +105,6 @@ static int omap_otg_probe(struct platform_device *pdev) extcon = extcon_get_extcon_dev(config->extcon); if (!extcon) return -EPROBE_DEFER; - otg_dev->extcon = extcon; otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL); if (!otg_dev) @@ -115,6 +114,7 @@ static int omap_otg_probe(struct platform_device *pdev) if (IS_ERR(otg_dev->base)) return PTR_ERR(otg_dev->base); + otg_dev->extcon = extcon; otg_dev->id_nb.notifier_call = omap_otg_id_notifier; otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier; diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index de4f97d84a82..8f7a78e70975 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -131,7 +131,8 @@ static void __usbhsg_queue_pop(struct usbhsg_uep *uep, struct device *dev = usbhsg_gpriv_to_dev(gpriv); struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); - dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe)); + if (pipe) + dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe)); ureq->req.status = status; spin_unlock(usbhs_priv_to_lock(priv)); @@ -685,7 +686,13 @@ static int usbhsg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); - usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq)); + if (pipe) + usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq)); + + /* + * To dequeue a request, this driver should call the usbhsg_queue_pop() + * even if the pipe is NULL. + */ usbhsg_queue_pop(uep, ureq, -ECONNRESET); return 0; diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index eac7ccaa3c85..7d4f51a32e66 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -132,7 +132,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ - { USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */ diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index f51a5d52c0ed..ec1b8f2c1183 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -531,7 +531,8 @@ static int ipaq_open(struct tty_struct *tty, * through. Since this has a reasonably high failure rate, we retry * several times. */ - while (retries--) { + while (retries) { + retries--; result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21, 0x1, 0, NULL, 0, 100); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 685fef71d3d1..f2280606b73c 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -161,6 +161,7 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001 #define NOVATELWIRELESS_PRODUCT_E362 0x9010 #define NOVATELWIRELESS_PRODUCT_E371 0x9011 +#define NOVATELWIRELESS_PRODUCT_U620L 0x9022 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 #define NOVATELWIRELESS_PRODUCT_MC551 0xB001 @@ -354,6 +355,7 @@ static void option_instat_callback(struct urb *urb); /* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick * * It seems to contain a Qualcomm QSC6240/6290 chipset */ #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 +#define FOUR_G_SYSTEMS_PRODUCT_W100 0x9b01 /* iBall 3.5G connect wireless modem */ #define IBALL_3_5G_CONNECT 0x9605 @@ -519,6 +521,11 @@ static const struct option_blacklist_info four_g_w14_blacklist = { .sendsetup = BIT(0) | BIT(1), }; +static const struct option_blacklist_info four_g_w100_blacklist = { + .sendsetup = BIT(1) | BIT(2), + .reserved = BIT(3), +}; + static const struct option_blacklist_info alcatel_x200_blacklist = { .sendsetup = BIT(0) | BIT(1), .reserved = BIT(4), @@ -1052,6 +1059,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E371, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U620L, 0xff, 0x00, 0x00) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, @@ -1641,6 +1649,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100), + .driver_info = (kernel_ulong_t)&four_g_w100_blacklist + }, { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) }, diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 5022fcfa0260..9919d2a9faf2 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -22,6 +22,8 @@ #define DRIVER_AUTHOR "Qualcomm Inc" #define DRIVER_DESC "Qualcomm USB Serial driver" +#define QUECTEL_EC20_PID 0x9215 + /* standard device layouts supported by this driver */ enum qcserial_layouts { QCSERIAL_G2K = 0, /* Gobi 2000 */ @@ -171,6 +173,38 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); +static int handle_quectel_ec20(struct device *dev, int ifnum) +{ + int altsetting = 0; + + /* + * Quectel EC20 Mini PCIe LTE module layout: + * 0: DM/DIAG (use libqcdm from ModemManager for communication) + * 1: NMEA + * 2: AT-capable modem port + * 3: Modem interface + * 4: NDIS + */ + switch (ifnum) { + case 0: + dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n"); + break; + case 1: + dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n"); + break; + case 2: + case 3: + dev_dbg(dev, "Quectel EC20 Modem port found\n"); + break; + case 4: + /* Don't claim the QMI/net interface */ + altsetting = -1; + break; + } + + return altsetting; +} + static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) { struct usb_host_interface *intf = serial->interface->cur_altsetting; @@ -181,6 +215,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) int altsetting = -1; bool sendsetup = false; + /* we only support vendor specific functions */ + if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC) + goto done; + nintf = serial->dev->actconfig->desc.bNumInterfaces; dev_dbg(dev, "Num Interfaces = %d\n", nintf); ifnum = intf->desc.bInterfaceNumber; @@ -240,6 +278,12 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) altsetting = -1; break; case QCSERIAL_G2K: + /* handle non-standard layouts */ + if (nintf == 5 && id->idProduct == QUECTEL_EC20_PID) { + altsetting = handle_quectel_ec20(dev, ifnum); + goto done; + } + /* * Gobi 2K+ USB layout: * 0: QMI/net @@ -301,29 +345,39 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) break; case QCSERIAL_HWI: /* - * Huawei layout: - * 0: AT-capable modem port - * 1: DM/DIAG - * 2: AT-capable modem port - * 3: CCID-compatible PCSC interface - * 4: QMI/net - * 5: NMEA + * Huawei devices map functions by subclass + protocol + * instead of interface numbers. The protocol identify + * a specific function, while the subclass indicate a + * specific firmware source + * + * This is a blacklist of functions known to be + * non-serial. The rest are assumed to be serial and + * will be handled by this driver */ - switch (ifnum) { - case 0: - case 2: - dev_dbg(dev, "Modem port found\n"); - break; - case 1: - dev_dbg(dev, "DM/DIAG interface found\n"); - break; - case 5: - dev_dbg(dev, "NMEA GPS interface found\n"); - break; - default: - /* don't claim any unsupported interface */ + switch (intf->desc.bInterfaceProtocol) { + /* QMI combined (qmi_wwan) */ + case 0x07: + case 0x37: + case 0x67: + /* QMI data (qmi_wwan) */ + case 0x08: + case 0x38: + case 0x68: + /* QMI control (qmi_wwan) */ + case 0x09: + case 0x39: + case 0x69: + /* NCM like (huawei_cdc_ncm) */ + case 0x16: + case 0x46: + case 0x76: altsetting = -1; break; + default: + dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n", + intf->desc.bInterfaceClass, + intf->desc.bInterfaceSubClass, + intf->desc.bInterfaceProtocol); } break; default: diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index e9da41d9fe7f..2694df2f4559 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -159,6 +159,7 @@ static const struct usb_device_id ti_id_table_3410[] = { { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) }, { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, + { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) }, { } /* terminator */ }; @@ -191,6 +192,7 @@ static const struct usb_device_id ti_id_table_combined[] = { { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, + { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) }, { } /* terminator */ }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 4a2423e84d55..98f35c656c02 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -56,6 +56,10 @@ #define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID #define ABBOTT_STRIP_PORT_ID 0x3420 +/* Honeywell vendor and product IDs */ +#define HONEYWELL_VENDOR_ID 0x10ac +#define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */ + /* Commands */ #define TI_GET_VERSION 0x01 #define TI_GET_PORT_STATUS 0x02 diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index 3658662898fc..a204782ae530 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -53,6 +53,7 @@ DEVICE(funsoft, FUNSOFT_IDS); /* Infineon Flashloader driver */ #define FLASHLOADER_IDS() \ + { USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \ { USB_DEVICE(0x8087, 0x0716) } DEVICE(flashloader, FLASHLOADER_IDS); diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index e69151664436..5c66d3f7a6d0 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -796,6 +796,10 @@ static int uas_slave_configure(struct scsi_device *sdev) if (devinfo->flags & US_FL_NO_REPORT_OPCODES) sdev->no_report_opcodes = 1; + /* A few buggy USB-ATA bridges don't understand FUA */ + if (devinfo->flags & US_FL_BROKEN_FUA) + sdev->broken_fua = 1; + scsi_change_queue_depth(sdev, devinfo->qdepth - 2); return 0; } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 6b2479123de7..7ffe4209067b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1987,7 +1987,7 @@ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, US_FL_IGNORE_RESIDUE ), /* Reported by Michael Büsch <m@bues.ch> */ -UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0114, +UNUSUAL_DEV( 0x152d, 0x0567, 0x0114, 0x0116, "JMicron", "USB to ATA/ATAPI Bridge", USB_SC_DEVICE, USB_PR_DEVICE, NULL, diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index c85ea530085f..ccc113e83d88 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -132,7 +132,7 @@ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999, "JMicron", "JMS567", USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_NO_REPORT_OPCODES), + US_FL_BROKEN_FUA | US_FL_NO_REPORT_OPCODES), /* Reported-by: Hans de Goede <hdegoede@redhat.com> */ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, |