diff options
Diffstat (limited to 'drivers/usb')
52 files changed, 2101 insertions, 3022 deletions
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 233f9229badb..2a1697bfd695 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -386,6 +386,8 @@ static void speedtch_poll_status(struct speedtch_instance_data *instance) if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) { instance->u.atm_dev->signal = ATM_PHY_SIG_LOST; printk(KERN_NOTICE "ADSL line is down\n"); + /* It'll never resync again unless we ask it to... */ + speedtch_start_synchro(instance); } break; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index e12c5be1e0a3..f50aaf25c98e 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -431,7 +431,7 @@ nomem: * (2) error, where io->status is a negative errno value. The number * of io->bytes transferred before the error is usually less * than requested, and can be nonzero. - * (3) cancelation, a type of error with status -ECONNRESET that + * (3) cancellation, a type of error with status -ECONNRESET that * is initiated by usb_sg_cancel(). * * When this function returns, all memory allocated through usb_sg_init() or @@ -1282,7 +1282,7 @@ static void release_interface(struct device *dev) * bus rwsem; usb device driver probe() methods cannot use this routine. * * Returns zero on success, or else the status code returned by the - * underlying call that failed. On succesful completion, each interface + * underlying call that failed. On successful completion, each interface * in the original device configuration has been destroyed, and each one * in the new configuration has been probed by all relevant usb device * drivers currently known to the kernel. diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index ec9b3bde8ae5..4d0c9e65cd03 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -286,6 +286,37 @@ static ssize_t show_interface_string(struct device *dev, char *buf) } static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL); +static ssize_t show_modalias(struct device *dev, char *buf) +{ + struct usb_interface *intf; + struct usb_device *udev; + int len; + + intf = to_usb_interface(dev); + udev = interface_to_usbdev(intf); + + len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + le16_to_cpu(udev->descriptor.bcdDevice), + udev->descriptor.bDeviceClass, + udev->descriptor.bDeviceSubClass, + udev->descriptor.bDeviceProtocol); + buf += len; + + if (udev->descriptor.bDeviceClass == 0) { + struct usb_host_interface *alt = intf->cur_altsetting; + + return len + sprintf(buf, "%02Xisc%02Xip%02X\n", + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol); + } else { + return len + sprintf(buf, "*isc*ip*\n"); + } +} +static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL); + static struct attribute *intf_attrs[] = { &dev_attr_bInterfaceNumber.attr, &dev_attr_bAlternateSetting.attr, @@ -293,6 +324,7 @@ static struct attribute *intf_attrs[] = { &dev_attr_bInterfaceClass.attr, &dev_attr_bInterfaceSubClass.attr, &dev_attr_bInterfaceProtocol.attr, + &dev_attr_modalias.attr, NULL, }; static struct attribute_group intf_attr_grp = { diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 16972159a57a..0faf18d511de 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -121,7 +121,7 @@ struct urb * usb_get_urb(struct urb *urb) * describing that request to the USB subsystem. Request completion will * be indicated later, asynchronously, by calling the completion handler. * The three types of completion are success, error, and unlink - * (a software-induced fault, also called "request cancelation"). + * (a software-induced fault, also called "request cancellation"). * * URBs may be submitted in interrupt context. * @@ -170,7 +170,7 @@ struct urb * usb_get_urb(struct urb *urb) * As of Linux 2.6, all USB endpoint transfer queues support depths greater * than one. This was previously a HCD-specific behavior, except for ISO * transfers. Non-isochronous endpoint queues are inactive during cleanup - * after faults (transfer errors or cancelation). + * after faults (transfer errors or cancellation). * * Reserved Bandwidth Transfers: * @@ -395,7 +395,7 @@ int usb_submit_urb(struct urb *urb, int mem_flags) * * This routine cancels an in-progress request. URBs complete only * once per submission, and may be canceled only once per submission. - * Successful cancelation means the requests's completion handler will + * Successful cancellation means the requests's completion handler will * be called with a status code indicating that the request has been * canceled (rather than any other code) and will quickly be removed * from host controller data structures. diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 3993156c2e82..3f783cbdc7c3 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -569,7 +569,7 @@ static const struct usb_cdc_ether_desc ether_desc = { /* include the status endpoint if we can, even where it's optional. * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one - * packet, to simplify cancelation; and a big transfer interval, to + * packet, to simplify cancellation; and a big transfer interval, to * waste less bandwidth. * * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 2cff67ccce45..1e5e6ddef787 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -275,7 +275,7 @@ static const char *CHIP; * * After opening, configure non-control endpoints. Then use normal * stream read() and write() requests; and maybe ioctl() to get more - * precise FIFO status when recovering from cancelation. + * precise FIFO status when recovering from cancellation. */ static void epio_complete (struct usb_ep *ep, struct usb_request *req) diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 0def9f70e889..df75ab65a5ec 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -705,7 +705,7 @@ void nuke(struct lh7a40x_ep *ep, int status) done(ep, req, status); } - /* Disable IRQ if EP is enabled (has decriptor) */ + /* Disable IRQ if EP is enabled (has descriptor) */ if (ep->desc) pio_irq_disable(ep_index(ep)); } diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index f1762ed6db63..4d591c764e38 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -240,7 +240,7 @@ struct gs_dev { struct usb_ep *dev_notify_ep; /* address of notify endpoint */ struct usb_ep *dev_in_ep; /* address of in endpoint */ struct usb_ep *dev_out_ep; /* address of out endpoint */ - struct usb_endpoint_descriptor /* desciptor of notify ep */ + struct usb_endpoint_descriptor /* descriptor of notify ep */ *dev_notify_ep_desc; struct usb_endpoint_descriptor /* descriptor of in endpoint */ *dev_in_ep_desc; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 3196c3265ff5..19e598c9641f 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -124,3 +124,14 @@ config USB_SL811_HCD To compile this driver as a module, choose M here: the module will be called sl811-hcd. +config USB_SL811_CS + tristate "CF/PCMCIA support for SL811HS HCD" + depends on USB_SL811_HCD && PCMCIA + default N + help + Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC + REX-CFU1U CF card (often used with PDAs). If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called "sl811_cs". + diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index a574ca06cf6b..5dbd3e7a27c7 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o +obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 84d2b93aca37..bc69bd7acebe 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -346,6 +346,22 @@ ehci_reboot (struct notifier_block *self, unsigned long code, void *null) return 0; } +static void ehci_port_power (struct ehci_hcd *ehci, int is_on) +{ + unsigned port; + + if (!HCS_PPC (ehci->hcs_params)) + return; + + ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down"); + for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) + (void) ehci_hub_control(ehci_to_hcd(ehci), + is_on ? SetPortFeature : ClearPortFeature, + USB_PORT_FEAT_POWER, + port--, NULL, 0); + msleep(20); +} + /* called by khubd or root hub init threads */ @@ -362,8 +378,10 @@ static int ehci_hc_reset (struct usb_hcd *hcd) dbg_hcs_params (ehci, "reset"); dbg_hcc_params (ehci, "reset"); + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl (&ehci->caps->hcs_params); + #ifdef CONFIG_PCI - /* EHCI 0.96 and later may have "extended capabilities" */ if (hcd->self.controller->bus == &pci_bus_type) { struct pci_dev *pdev = to_pci_dev(hcd->self.controller); @@ -383,9 +401,30 @@ static int ehci_hc_reset (struct usb_hcd *hcd) break; } + /* optional debug port, normally in the first BAR */ + temp = pci_find_capability (pdev, 0x0a); + if (temp) { + pci_read_config_dword(pdev, temp, &temp); + temp >>= 16; + if ((temp & (3 << 13)) == (1 << 13)) { + temp &= 0x1fff; + ehci->debug = hcd->regs + temp; + temp = readl (&ehci->debug->control); + ehci_info (ehci, "debug port %d%s\n", + HCS_DEBUG_PORT(ehci->hcs_params), + (temp & DBGP_ENABLED) + ? " IN USE" + : ""); + if (!(temp & DBGP_ENABLED)) + ehci->debug = NULL; + } + } + temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params)); } else temp = 0; + + /* EHCI 0.96 and later may have "extended capabilities" */ while (temp && count--) { u32 cap; @@ -414,8 +453,7 @@ static int ehci_hc_reset (struct usb_hcd *hcd) ehci_reset (ehci); #endif - /* cache this readonly data; minimize PCI reads */ - ehci->hcs_params = readl (&ehci->caps->hcs_params); + ehci_port_power (ehci, 0); /* at least the Genesys GL880S needs fixup here */ temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); @@ -657,16 +695,11 @@ done2: static void ehci_stop (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u8 rh_ports, port; ehci_dbg (ehci, "stop\n"); /* Turn off port power on all root hub ports. */ - rh_ports = HCS_N_PORTS (ehci->hcs_params); - for (port = 1; port <= rh_ports; port++) - (void) ehci_hub_control(hcd, - ClearPortFeature, USB_PORT_FEAT_POWER, - port, NULL, 0); + ehci_port_power (ehci, 0); /* no more interrupts ... */ del_timer_sync (&ehci->watchdog); @@ -748,7 +781,6 @@ static int ehci_resume (struct usb_hcd *hcd) unsigned port; struct usb_device *root = hcd->self.root_hub; int retval = -EINVAL; - int powerup = 0; // maybe restore (PCI) FLADJ @@ -766,8 +798,6 @@ static int ehci_resume (struct usb_hcd *hcd) up (&hcd->self.root_hub->serialize); break; } - if ((status & PORT_POWER) == 0) - powerup = 1; if (!root->children [port]) continue; dbg_port (ehci, __FUNCTION__, port + 1, status); @@ -794,16 +824,9 @@ static int ehci_resume (struct usb_hcd *hcd) retval = ehci_start (hcd); /* here we "know" root ports should always stay powered; - * but some controllers may lost all power. + * but some controllers may lose all power. */ - if (powerup) { - ehci_dbg (ehci, "...powerup ports...\n"); - for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) - (void) ehci_hub_control(hcd, - SetPortFeature, USB_PORT_FEAT_POWER, - port--, NULL, 0); - msleep(20); - } + ehci_port_power (ehci, 1); } return retval; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 2373537fabed..d7b4f7939ded 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -72,6 +72,7 @@ static int ehci_hub_suspend (struct usb_hcd *hcd) } /* turn off now-idle HC */ + del_timer_sync (&ehci->watchdog); ehci_halt (ehci); hcd->state = HC_STATE_SUSPENDED; @@ -281,6 +282,8 @@ ehci_hub_descriptor ( temp = 0x0008; /* per-port overcurrent reporting */ if (HCS_PPC (ehci->hcs_params)) temp |= 0x0001; /* per-port power control */ + else + temp |= 0x0002; /* no power switching */ #if 0 // re-enable when we support USB_PORT_FEAT_INDICATOR below. if (HCS_INDICATOR (ehci->hcs_params)) @@ -436,9 +439,12 @@ static int ehci_hub_control ( /* force reset to complete */ writel (temp & ~PORT_RESET, &ehci->regs->port_status [wIndex]); + /* REVISIT: some hardware needs 550+ usec to clear + * this bit; seems too long to spin routinely... + */ retval = handshake ( &ehci->regs->port_status [wIndex], - PORT_RESET, 0, 500); + PORT_RESET, 0, 750); if (retval != 0) { ehci_err (ehci, "port %d reset error %d\n", wIndex + 1, retval); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index e763a8399a75..4df498231752 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -47,6 +47,12 @@ struct ehci_stats { #define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */ struct ehci_hcd { /* one per controller */ + /* glue to PCI and HCD framework */ + struct ehci_caps __iomem *caps; + struct ehci_regs __iomem *regs; + struct ehci_dbg_port __iomem *debug; + + __u32 hcs_params; /* cached register copy */ spinlock_t lock; /* async schedule support */ @@ -84,11 +90,6 @@ struct ehci_hcd { /* one per controller */ unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */ - /* glue to PCI and HCD framework */ - struct ehci_caps __iomem *caps; - struct ehci_regs __iomem *regs; - __u32 hcs_params; /* cached register copy */ - /* irq statistics */ #ifdef EHCI_STATS struct ehci_stats stats; @@ -165,7 +166,7 @@ struct ehci_caps { /* these fields are specified as 8 and 16 bit registers, * but some hosts can't perform 8 or 16 bit PCI accesses. */ - u32 hc_capbase; + u32 hc_capbase; #define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ #define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ u32 hcs_params; /* HCSPARAMS - offset 0x4 */ @@ -273,7 +274,7 @@ struct ehci_dbg_port { #define DBGP_ENABLED (1<<28) #define DBGP_DONE (1<<16) #define DBGP_INUSE (1<<10) -#define DBGP_ERRCODE(x) (((x)>>7)&0x0f) +#define DBGP_ERRCODE(x) (((x)>>7)&0x07) # define DBGP_ERR_BAD 1 # define DBGP_ERR_SIGNAL 2 #define DBGP_ERROR (1<<6) @@ -282,11 +283,11 @@ struct ehci_dbg_port { #define DBGP_LEN(x) (((x)>>0)&0x0f) u32 pids; #define DBGP_PID_GET(x) (((x)>>16)&0xff) -#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok)); +#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok)) u32 data03; u32 data47; u32 address; -#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep)); +#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep)) } __attribute__ ((packed)); /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c index 376f8a034f65..d9883d774d3a 100644 --- a/drivers/usb/host/hc_crisv10.c +++ b/drivers/usb/host/hc_crisv10.c @@ -4329,7 +4329,7 @@ static int __init etrax_usb_hc_init(void) bus->bus_name="ETRAX 100LX"; bus->hcpriv = hc; - /* Initalize RH to the default address. + /* Initialize RH to the default address. And make sure that we have no status change indication */ hc->rh.numports = 2; /* The RH has two ports */ hc->rh.devnum = 1; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index d309e292198e..99d43f758ad0 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -2,8 +2,8 @@ * SL811HS HCD (Host Controller Driver) for USB. * * Copyright (C) 2004 Psion Teklogix (for NetBook PRO) - * Copyright (C) 2004 David Brownell - * + * Copyright (C) 2004-2005 David Brownell + * * Periodic scheduling is based on Roman's OHCI code * Copyright (C) 1999 Roman Weissgaerber * @@ -15,7 +15,7 @@ * For documentation, see the SL811HS spec and the "SL811HS Embedded Host" * document (providing significant pieces missing from that spec); plus * the SL811S spec if you want peripheral side info. - */ + */ /* * Status: Passed basic stress testing, works with hubs, mice, keyboards, @@ -67,7 +67,7 @@ MODULE_DESCRIPTION("SL811HS USB Host Controller Driver"); MODULE_LICENSE("GPL"); -#define DRIVER_VERSION "15 Dec 2004" +#define DRIVER_VERSION "19 May 2005" #ifndef DEBUG @@ -121,6 +121,10 @@ static void port_power(struct sl811 *sl811, int is_on) /* reset as thoroughly as we can */ if (sl811->board && sl811->board->reset) sl811->board->reset(hcd->self.controller); + else { + sl811_write(sl811, SL11H_CTLREG1, SL11H_CTL1MASK_SE0); + mdelay(20); + } sl811_write(sl811, SL11H_IRQ_ENABLE, 0); sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); @@ -134,7 +138,7 @@ static void port_power(struct sl811 *sl811, int is_on) /* This is a PIO-only HCD. Queueing appends URBs to the endpoint's queue, * and may start I/O. Endpoint queues are scanned during completion irq - * handlers (one per packet: ACK, NAK, faults, etc) and urb cancelation. + * handlers (one per packet: ACK, NAK, faults, etc) and urb cancellation. * * Using an external DMA engine to copy a packet at a time could work, * though setup/teardown costs may be too big to make it worthwhile. @@ -443,6 +447,7 @@ static void finish_request( spin_lock(&urb->lock); if (urb->status == -EINPROGRESS) urb->status = status; + urb->hcpriv = NULL; spin_unlock(&urb->lock); spin_unlock(&sl811->lock); @@ -472,7 +477,7 @@ static void finish_request( if (*prev) *prev = ep->next; sl811->load[i] -= ep->load; - } + } ep->branch = PERIODIC_SIZE; sl811->periodic_count--; sl811_to_hcd(sl811)->self.bandwidth_allocated @@ -661,9 +666,9 @@ retry: #ifdef QUIRK2 /* this may no longer be necessary ... */ - if (irqstat == 0 && ret == IRQ_NONE) { + if (irqstat == 0) { irqstat = checkdone(sl811); - if (irqstat /* && irq != ~0 */ ) + if (irqstat) sl811->stat_lost++; } #endif @@ -722,7 +727,8 @@ retry: if (sl811->active_a) { sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0); finish_request(sl811, sl811->active_a, - container_of(sl811->active_a->hep->urb_list.next, + container_of(sl811->active_a + ->hep->urb_list.next, struct urb, urb_list), NULL, -ESHUTDOWN); sl811->active_a = NULL; @@ -731,14 +737,15 @@ retry: if (sl811->active_b) { sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0); finish_request(sl811, sl811->active_b, - container_of(sl811->active_b->hep->urb_list.next, + container_of(sl811->active_b + ->hep->urb_list.next, struct urb, urb_list), NULL, -ESHUTDOWN); sl811->active_b = NULL; } #endif - /* port status seems wierd until after reset, so + /* port status seems weird until after reset, so * force the reset and make khubd clean up later. */ sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION) @@ -761,7 +768,7 @@ retry: goto retry; } - if (sl811->periodic_count == 0 && list_empty(&sl811->async)) + if (sl811->periodic_count == 0 && list_empty(&sl811->async)) sofirq_off(sl811); sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); @@ -796,7 +803,7 @@ static int balance(struct sl811 *sl811, u16 period, u16 load) } if (j < PERIODIC_SIZE) continue; - branch = i; + branch = i; } } return branch; @@ -890,6 +897,7 @@ static int sl811h_urb_enqueue( break; } + ep->hep = hep; hep->hcpriv = ep; } @@ -961,15 +969,16 @@ fail: static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) { struct sl811 *sl811 = hcd_to_sl811(hcd); - struct usb_host_endpoint *hep = urb->hcpriv; + struct usb_host_endpoint *hep; unsigned long flags; struct sl811h_ep *ep; int retval = 0; + spin_lock_irqsave(&sl811->lock, flags); + hep = urb->hcpriv; if (!hep) - return -EINVAL; + goto fail; - spin_lock_irqsave(&sl811->lock, flags); ep = hep->hcpriv; if (ep) { /* finish right away if this urb can't be active ... @@ -1017,6 +1026,7 @@ static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) VDBG("dequeue, urb %p active %s; wait4irq\n", urb, (sl811->active_a == ep) ? "A" : "B"); } else +fail: retval = -EINVAL; spin_unlock_irqrestore(&sl811->lock, flags); return retval; @@ -1576,6 +1586,9 @@ sl811h_start(struct usb_hcd *hcd) if (sl811->board && sl811->board->power) hub_set_power_budget(udev, sl811->board->power * 2); + /* enable power and interupts */ + port_power(sl811, 1); + return 0; } @@ -1618,7 +1631,7 @@ static struct hc_driver sl811h_hc_driver = { /*-------------------------------------------------------------------------*/ -static int __init_or_module +static int __devexit sl811h_remove(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -1631,21 +1644,20 @@ sl811h_remove(struct device *dev) remove_debug_file(sl811); usb_remove_hcd(hcd); - iounmap(sl811->data_reg); + /* some platforms may use IORESOURCE_IO */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - release_mem_region(res->start, 1); + if (res) + iounmap(sl811->data_reg); - iounmap(sl811->addr_reg); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, 1); + if (res) + iounmap(sl811->addr_reg); usb_put_hcd(hcd); return 0; } -#define resource_len(r) (((r)->end - (r)->start) + 1) - -static int __init +static int __devinit sl811h_probe(struct device *dev) { struct usb_hcd *hcd; @@ -1656,7 +1668,7 @@ sl811h_probe(struct device *dev) void __iomem *addr_reg; void __iomem *data_reg; int retval; - u8 tmp; + u8 tmp, ioaddr = 0; /* basic sanity checks first. board-specific init logic should * have initialized these three resources and probably board @@ -1664,13 +1676,8 @@ sl811h_probe(struct device *dev) * minimal sanity checking. */ pdev = container_of(dev, struct platform_device, dev); - if (pdev->num_resources < 3) - return -ENODEV; - - addr = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data = platform_get_resource(pdev, IORESOURCE_MEM, 1); irq = platform_get_irq(pdev, 0); - if (!addr || !data || irq < 0) + if (pdev->num_resources < 3 || irq < 0) return -ENODEV; /* refuse to confuse usbcore */ @@ -1679,24 +1686,31 @@ sl811h_probe(struct device *dev) return -EINVAL; } - if (!request_mem_region(addr->start, 1, hcd_name)) { - retval = -EBUSY; - goto err1; - } - addr_reg = ioremap(addr->start, resource_len(addr)); - if (addr_reg == NULL) { - retval = -ENOMEM; - goto err2; - } + /* the chip may be wired for either kind of addressing */ + addr = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data = platform_get_resource(pdev, IORESOURCE_MEM, 1); + retval = -EBUSY; + if (!addr || !data) { + addr = platform_get_resource(pdev, IORESOURCE_IO, 0); + data = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (!addr || !data) + return -ENODEV; + ioaddr = 1; + + addr_reg = (void __iomem *) addr->start; + data_reg = (void __iomem *) data->start; + } else { + addr_reg = ioremap(addr->start, 1); + if (addr_reg == NULL) { + retval = -ENOMEM; + goto err2; + } - if (!request_mem_region(data->start, 1, hcd_name)) { - retval = -EBUSY; - goto err3; - } - data_reg = ioremap(data->start, resource_len(addr)); - if (data_reg == NULL) { - retval = -ENOMEM; - goto err4; + data_reg = ioremap(data->start, 1); + if (data_reg == NULL) { + retval = -ENOMEM; + goto err4; + } } /* allocate and initialize hcd */ @@ -1737,12 +1751,14 @@ sl811h_probe(struct device *dev) goto err6; } - /* sl811s would need a different handler for this irq */ -#ifdef CONFIG_ARM - /* Cypress docs say the IRQ is IRQT_HIGH ... */ - set_irq_type(irq, IRQT_RISING); -#endif - retval = usb_add_hcd(hcd, irq, SA_INTERRUPT); + /* The chip's IRQ is level triggered, active high. A requirement + * for platform device setup is to cope with things like signal + * inverters (e.g. CF is active low) or working only with edge + * triggers (e.g. most ARM CPUs). Initial driver stress testing + * was on a system with single edge triggering, so most sorts of + * triggering arrangement should work. + */ + retval = usb_add_hcd(hcd, irq, SA_INTERRUPT | SA_SHIRQ); if (retval != 0) goto err6; @@ -1752,14 +1768,12 @@ sl811h_probe(struct device *dev) err6: usb_put_hcd(hcd); err5: - iounmap(data_reg); + if (!ioaddr) + iounmap(data_reg); err4: - release_mem_region(data->start, 1); - err3: - iounmap(addr_reg); + if (!ioaddr) + iounmap(addr_reg); err2: - release_mem_region(addr->start, 1); - err1: DBG("init error, %d\n", retval); return retval; } @@ -1767,7 +1781,7 @@ sl811h_probe(struct device *dev) #ifdef CONFIG_PM /* for this device there's no useful distinction between the controller - * and its root hub, except that the root hub only gets direct PM calls + * and its root hub, except that the root hub only gets direct PM calls * when CONFIG_USB_SUSPEND is enabled. */ @@ -1821,20 +1835,22 @@ sl811h_resume(struct device *dev, u32 phase) #endif -static struct device_driver sl811h_driver = { +/* this driver is exported so sl811_cs can depend on it */ +struct device_driver sl811h_driver = { .name = (char *) hcd_name, .bus = &platform_bus_type, .probe = sl811h_probe, - .remove = sl811h_remove, + .remove = __devexit_p(sl811h_remove), .suspend = sl811h_suspend, .resume = sl811h_resume, }; +EXPORT_SYMBOL(sl811h_driver); /*-------------------------------------------------------------------------*/ - -static int __init sl811h_init(void) + +static int __init sl811h_init(void) { if (usb_disabled()) return -ENODEV; @@ -1844,8 +1860,8 @@ static int __init sl811h_init(void) } module_init(sl811h_init); -static void __exit sl811h_cleanup(void) -{ +static void __exit sl811h_cleanup(void) +{ driver_unregister(&sl811h_driver); } module_exit(sl811h_cleanup); diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c new file mode 100644 index 000000000000..6e173265095c --- /dev/null +++ b/drivers/usb/host/sl811_cs.c @@ -0,0 +1,442 @@ +/* + * PCMCIA driver for SL811HS (as found in REX-CFU1U) + * Filename: sl811_cs.c + * Author: Yukio Yamamoto + * + * Port to sl811-hcd and 2.6.x by + * Botond Botyanszki <boti@rocketmail.com> + * Simon Pickering + * + * Last update: 2005-05-12 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include <linux/usb_sl811.h> + +MODULE_AUTHOR("Botond Botyanszki"); +MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6"); +MODULE_LICENSE("GPL"); + + +/*====================================================================*/ +/* MACROS */ +/*====================================================================*/ + +#if defined(DEBUG) || defined(CONFIG_USB_DEBUG) || defined(PCMCIA_DEBUG) + +static int pc_debug = 0; +module_param(pc_debug, int, 0644); + +#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args) + +#else +#define DBG(n, args...) do{}while(0) +#endif /* no debugging */ + +#define INFO(args...) printk(KERN_INFO "sl811_cs: " args) + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444) + +#define CS_CHECK(fn, ret) \ + do { \ + last_fn = (fn); \ + if ((last_ret = (ret)) != 0) \ + goto cs_failed; \ + } while (0) + +/*====================================================================*/ +/* VARIABLES */ +/*====================================================================*/ + +static const char driver_name[DEV_NAME_LEN] = "sl811_cs"; + +static dev_link_t *dev_list = NULL; + +static int irq_list[4] = { -1 }; +static int irq_list_count; + +module_param_array(irq_list, int, &irq_list_count, 0444); + +INT_MODULE_PARM(irq_mask, 0xdeb8); + +typedef struct local_info_t { + dev_link_t link; + dev_node_t node; +} local_info_t; + +/*====================================================================*/ + +static void release_platform_dev(struct device * dev) +{ + DBG(0, "sl811_cs platform_dev release\n"); + dev->parent = NULL; +} + +static struct sl811_platform_data platform_data = { + .potpg = 100, + .power = 50, /* == 100mA */ + // .reset = ... FIXME: invoke CF reset on the card +}; + +static struct resource resources[] = { + [0] = { + .flags = IORESOURCE_IRQ, + }, + [1] = { + // .name = "address", + .flags = IORESOURCE_IO, + }, + [2] = { + // .name = "data", + .flags = IORESOURCE_IO, + }, +}; + +extern struct device_driver sl811h_driver; + +static struct platform_device platform_dev = { + .id = -1, + .dev = { + .platform_data = &platform_data, + .release = release_platform_dev, + }, + .resource = resources, + .num_resources = ARRAY_SIZE(resources), +}; + +static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq) +{ + if (platform_dev.dev.parent) + return -EBUSY; + platform_dev.dev.parent = parent; + + /* finish seting up the platform device */ + resources[0].start = irq; + + resources[1].start = base_addr; + resources[1].end = base_addr; + + resources[2].start = base_addr + 1; + resources[2].end = base_addr + 1; + + /* The driver core will probe for us. We know sl811-hcd has been + * initialized already because of the link order dependency. + */ + platform_dev.name = sl811h_driver.name; + return platform_device_register(&platform_dev); +} + +/*====================================================================*/ + +static void sl811_cs_detach(dev_link_t *link) +{ + dev_link_t **linkp; + + DBG(0, "sl811_cs_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) { + if (*linkp == link) + break; + } + if (*linkp == NULL) + return; + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + /* Unlink device structure, and free it */ + *linkp = link->next; + /* This points to the parent local_info_t struct */ + kfree(link->priv); +} + +static void sl811_cs_release(dev_link_t * link) +{ + + DBG(0, "sl811_cs_release(0x%p)\n", link); + + if (link->open) { + DBG(1, "sl811_cs: release postponed, '%s' still open\n", + link->dev->dev_name); + link->state |= DEV_STALE_CONFIG; + return; + } + + /* Unlink the device chain */ + link->dev = NULL; + + platform_device_unregister(&platform_dev); + pcmcia_release_configuration(link->handle); + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + if (link->irq.AssignedIRQ) + pcmcia_release_irq(link->handle, &link->irq); + link->state &= ~DEV_CONFIG; + + if (link->state & DEV_STALE_LINK) + sl811_cs_detach(link); +} + +static void sl811_cs_config(dev_link_t *link) +{ + client_handle_t handle = link->handle; + struct device *parent = &handle_to_dev(handle); + local_info_t *dev = link->priv; + tuple_t tuple; + cisparse_t parse; + int last_fn, last_ret; + u_char buf[64]; + config_info_t conf; + cistpl_cftable_entry_t dflt = { 0 }; + + DBG(0, "sl811_cs_config(0x%p)\n", link); + + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Look up the current Vcc */ + CS_CHECK(GetConfigurationInfo, + pcmcia_get_configuration_info(handle, &conf)); + link->conf.Vcc = conf.Vcc; + + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + while (1) { + cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); + + if (pcmcia_get_tuple_data(handle, &tuple) != 0 + || pcmcia_parse_tuple(handle, &tuple, &parse) + != 0) + goto next_entry; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { + dflt = *cfg; + } + + if (cfg->index == 0) + goto next_entry; + + link->conf.ConfigIndex = cfg->index; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 + != conf.Vcc) + goto next_entry; + } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000 + != conf.Vcc) + goto next_entry; + } + + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* we need an interrupt */ + if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) + link->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + link->io.NumPorts1 = link->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; + + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + + if (pcmcia_request_io(link->handle, &link->io) != 0) + goto next_entry; + } + break; + +next_entry: + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + last_ret = pcmcia_get_next_tuple(handle, &tuple); + } + + /* require an IRQ and two registers */ + if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) + goto cs_failed; + if (link->conf.Attributes & CONF_ENABLE_IRQ) + CS_CHECK(RequestIRQ, + pcmcia_request_irq(link->handle, &link->irq)); + else + goto cs_failed; + + CS_CHECK(RequestConfiguration, + pcmcia_request_configuration(link->handle, &link->conf)); + + sprintf(dev->node.dev_name, driver_name); + dev->node.major = dev->node.minor = 0; + link->dev = &dev->node; + + printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d", + dev->node.dev_name, link->conf.ConfigIndex, + link->conf.Vcc/10, link->conf.Vcc%10); + if (link->conf.Vpp1) + printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10); + printk(", irq %d", link->irq.AssignedIRQ); + printk(", io 0x%04x-0x%04x", link->io.BasePort1, + link->io.BasePort1+link->io.NumPorts1-1); + printk("\n"); + + link->state &= ~DEV_CONFIG_PENDING; + + if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ) + < 0) { +cs_failed: + printk("sl811_cs_config failed\n"); + cs_error(link->handle, last_fn, last_ret); + sl811_cs_release(link); + link->state &= ~DEV_CONFIG_PENDING; + } +} + +static int +sl811_cs_event(event_t event, int priority, event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + + DBG(1, "sl811_cs_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) + sl811_cs_release(link); + break; + + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + sl811_cs_config(link); + break; + + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) + pcmcia_release_configuration(link->handle); + break; + + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) + pcmcia_request_configuration(link->handle, &link->conf); + DBG(0, "reset sl811-hcd here?\n"); + break; + } + return 0; +} + +static dev_link_t *sl811_cs_attach(void) +{ + local_info_t *local; + dev_link_t *link; + client_reg_t client_reg; + int ret, i; + + local = kmalloc(sizeof(local_info_t), GFP_KERNEL); + if (!local) + return NULL; + memset(local, 0, sizeof(local_info_t)); + link = &local->link; + link->priv = local; + + /* Initialize */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID; + if (irq_list[0] == -1) + link->irq.IRQInfo2 = irq_mask; + else + for (i = 0; i < irq_list_count; i++) + link->irq.IRQInfo2 |= 1 << irq_list[i]; + link->irq.Handler = NULL; + + link->conf.Attributes = 0; + link->conf.Vcc = 33; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = (dev_info_t *) &driver_name; + client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &sl811_cs_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != CS_SUCCESS) { + cs_error(link->handle, RegisterClient, ret); + sl811_cs_detach(link); + return NULL; + } + + return link; +} + +static struct pcmcia_driver sl811_cs_driver = { + .owner = THIS_MODULE, + .drv = { + .name = (char *)driver_name, + }, + .attach = sl811_cs_attach, + .detach = sl811_cs_detach, +}; + +/*====================================================================*/ + +static int __init init_sl811_cs(void) +{ + return pcmcia_register_driver(&sl811_cs_driver); +} +module_init(init_sl811_cs); + +static void __exit exit_sl811_cs(void) +{ + pcmcia_unregister_driver(&sl811_cs_driver); +} +module_exit(exit_sl811_cs); diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index 5791723e6083..a330a4b50e16 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -23,7 +23,7 @@ * * * The driver brings the USB functions of the MDC800 to Linux. - * To use the Camera you must support the USB Protocoll of the camera + * To use the Camera you must support the USB Protocol of the camera * to the Kernel Node. * The Driver uses a misc device Node. Create it with : * mknod /dev/mustek c 180 32 diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 2d76be62f4e0..94ce2a9ad50f 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -386,7 +386,7 @@ static int aiptek_convert_from_2s_complement(unsigned char c) * convention above.) I therefore have taken over REL_MISC and ABS_MISC * (for relative and absolute reports, respectively) for communicating * Proximity. Why two events? I thought it interesting to know if the - * Proximity event occured while the tablet was in absolute or relative + * Proximity event occurred while the tablet was in absolute or relative * mode. * * Other tablets use the notion of a certain minimum stylus pressure diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 869ff73690ac..2d8bd9dcc6ed 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1315,6 +1315,8 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_WACOM_INTUOS2 0x0040 #define USB_DEVICE_ID_WACOM_VOLITO 0x0060 #define USB_DEVICE_ID_WACOM_PTU 0x0003 +#define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0 +#define USB_DEVICE_ID_WACOM_CINTIQ 0x003F #define USB_VENDOR_ID_KBGEAR 0x084e #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001 @@ -1401,6 +1403,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_DELORME 0x1163 #define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100 +#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200 #define USB_VENDOR_ID_MCC 0x09db #define USB_DEVICE_ID_MCC_PMD1024LS 0x0076 @@ -1412,6 +1415,12 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_BTC 0x046e #define USB_DEVICE_ID_BTC_KEYBOARD 0x5303 +#define USB_VENDOR_ID_VERNIER 0x08f7 +#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 +#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 +#define USB_DEVICE_ID_VERNIER_SKIP 0x0003 +#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 + /* * Alphabetically sorted blacklist by quirk type. @@ -1437,6 +1446,7 @@ static struct hid_blacklist { { USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE }, @@ -1456,6 +1466,10 @@ static struct hid_blacklist { { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE }, @@ -1481,6 +1495,10 @@ static struct hid_blacklist { { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index 6b45a66d58c1..ab1a2a30ce7c 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -32,7 +32,7 @@ * Changed reset from standard USB dev reset to vendor reset * Changed data sent to host from compensated to raw coordinates * Eliminated vendor/product module params - * Performed multiple successfull tests with an EXII-5010UC + * Performed multiple successful tests with an EXII-5010UC * * 1.5 02/27/2005 ddstreet@ieee.org * Added module parameter to select raw or hw-calibrated coordinate reporting diff --git a/drivers/usb/media/ov511.c b/drivers/usb/media/ov511.c index d6051822416e..036c485d1d1e 100644 --- a/drivers/usb/media/ov511.c +++ b/drivers/usb/media/ov511.c @@ -5041,7 +5041,7 @@ ov6xx0_configure(struct usb_ov511 *ov) { OV511_I2C_BUS, 0x2a, 0x04 }, /* Disable framerate adjust */ // { OV511_I2C_BUS, 0x2b, 0xac }, /* Framerate; Set 2a[7] first */ { OV511_I2C_BUS, 0x2d, 0x99 }, - { OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Procesing Parameter */ + { OV511_I2C_BUS, 0x33, 0xa0 }, /* Color Processing Parameter */ { OV511_I2C_BUS, 0x34, 0xd2 }, /* Max A/D range */ { OV511_I2C_BUS, 0x38, 0x8b }, { OV511_I2C_BUS, 0x39, 0x40 }, diff --git a/drivers/usb/media/pwc/ChangeLog b/drivers/usb/media/pwc/ChangeLog deleted file mode 100644 index b2eb71a9afb5..000000000000 --- a/drivers/usb/media/pwc/ChangeLog +++ /dev/null @@ -1,143 +0,0 @@ -9.0.2 - -* Adding #ifdef to compile PWC before and after 2.6.5 - -9.0.1 - -9.0 - - -8.12 - -* Implement motorized pan/tilt feature for Logitech QuickCam Orbit/Spere. - -8.11.1 - -* Fix for PCVC720/40, would not be able to set videomode -* Fix for Samsung MPC models, appearantly they are based on a newer chipset - -8.11 - -* 20 dev_hints (per request) -* Hot unplugging should be better, no more dangling pointers or memory leaks -* Added reserved Logitech webcam IDs -* Device now remembers size & fps between close()/open() -* Removed palette stuff altogether - -8.10.1 - -* Added IDs for PCVC720K/40 and Creative Labs Webcam Pro - -8.10 - -* Fixed ID for QuickCam Notebook pro -* Added GREALSIZE ioctl() call -* Fixed bug in case PWCX was not loaded and invalid size was set - -8.9 - -* Merging with kernel 2.5.49 -* Adding IDs for QuickCam Zoom & QuickCam Notebook - -8.8 - -* Fixing 'leds' parameter -* Adding IDs for Logitech QuickCam Pro 4000 -* Making URB init/cleanup a little nicer - -8.7 - -* Incorporating changes in ioctl() parameter passing -* Also changes to URB mechanism - -8.6 - -* Added ID's for Visionite VCS UM100 and UC300 -* Removed YUV420-interlaced palette altogether (was confusing) -* Removed MIRROR stuff as it didn't work anyway -* Fixed a problem with the 'leds' parameter (wouldn't blink) -* Added ioctl()s for advanced features: 'extended' whitebalance ioctl()s, - CONTOUR, BACKLIGHT, FLICKER, DYNNOISE. -* VIDIOCGCAP.name now contains real camera model name instead of - 'Philips xxx webcam' -* Added PROBE ioctl (see previous point & API doc) - -8.5 - -* Adding IDs for Creative Labs Webcam 5 -* Adding IDs for SOTEC CMS-001 webcam -* Solving possible hang in VIDIOCSYNC when unplugging the cam -* Forgot to return structure in VIDIOCPWCGAWB, oops -* Time interval for the LEDs are now in milliseconds - -8.4 - -* Fixing power_save option for Vesta range -* Handling new error codes in ISOC callback -* Adding dev_hint module parameter, to specify /dev/videoX device nodes - -8.3 - -* Adding Samsung C10 and C30 cameras -* Removing palette module parameter -* Fixed typo in ID of QuickCam 3000 Pro -* Adding LED settings (blinking while in use) for ToUCam cameras. -* Turns LED off when camera is not in use. - -8.2 - -* Making module more silent when trace = 0 -* Adding QuickCam 3000 Pro IDs -* Chrominance control for the Vesta cameras -* Hopefully fixed problems on machines with BIGMEM and > 1GB of RAM -* Included Oliver Neukem's lock_kernel() patch -* Allocates less memory for image buffers -* Adds ioctl()s for the whitebalancing - -8.1 - -* Adding support for 750 -* Adding V4L GAUDIO/SAUDIO/UNIT ioctl() calls - -8.0 -* 'damage control' after inclusion in 2.4.5. -* Changed wait-queue mechanism in read/mmap/poll according to the book. -* Included YUV420P palette. -* Changed interface to decompressor module. -* Cleaned up pwc structure a bit. - -7.0 - -* Fixed bug in vcvt_420i_yuyv; extra variables on stack were misaligned. -* There is now a clear error message when an image size is selected that - is only supported using the decompressor, and the decompressor isn't - loaded. -* When the decompressor wasn't loaded, selecting large image size - would create skewed or double images. - -6.3 - -* Introduced spinlocks for the buffer pointer manipulation; a number of - reports seem to suggest the down()/up() semaphores were the cause of - lockups, since they are not suitable for interrupt/user locking. -* Separated decompressor and core code into 2 modules. - -6.2 - -* Non-integral image sizes are now padded with gray or black. -* Added SHUTTERSPEED ioctl(). -* Fixed buglet in VIDIOCPWCSAGC; the function would always return an error, - even though the call succeeded. -* Added hotplug support for 2.4.*. -* Memory: the 645/646 uses less memory now. - -6.1 - -* VIDIOCSPICT returns -EINVAL with invalid palettes. -* Added saturation control. -* Split decompressors from rest. -* Fixed bug that would reset the framerate to the default framerate if - the rate field was set to 0 (which is not what I intended, nl. do not - change the framerate!). -* VIDIOCPWCSCQUAL (setting compression quality) now takes effect immediately. -* Workaround for a bug in the 730 sensor. diff --git a/drivers/usb/media/pwc/Makefile b/drivers/usb/media/pwc/Makefile index e0b41ed4407f..2d93a775011a 100644 --- a/drivers/usb/media/pwc/Makefile +++ b/drivers/usb/media/pwc/Makefile @@ -1,6 +1,6 @@ ifneq ($(KERNELRELEASE),) -pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-dec1.o pwc-dec23.o pwc-kiara.o pwc-timon.o +pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o obj-$(CONFIG_USB_PWC) += pwc.o diff --git a/drivers/usb/media/pwc/pwc-ctrl.c b/drivers/usb/media/pwc/pwc-ctrl.c index 42352f531bc0..53099190952c 100644 --- a/drivers/usb/media/pwc/pwc-ctrl.c +++ b/drivers/usb/media/pwc/pwc-ctrl.c @@ -48,8 +48,6 @@ #include "pwc-uncompress.h" #include "pwc-kiara.h" #include "pwc-timon.h" -#include "pwc-dec1.h" -#include "pwc-dec23.h" /* Request types: video */ #define SET_LUM_CTL 0x01 @@ -246,7 +244,7 @@ static inline int set_video_mode_Nala(struct pwc_device *pdev, int size, int fra switch(pdev->type) { case 645: case 646: - pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data); +/* pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ break; case 675: @@ -256,7 +254,7 @@ static inline int set_video_mode_Nala(struct pwc_device *pdev, int size, int fra case 730: case 740: case 750: - pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); +/* pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ break; } } @@ -318,8 +316,8 @@ static inline int set_video_mode_Timon(struct pwc_device *pdev, int size, int fr if (ret < 0) return ret; - if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) - pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); +/* if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) + pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ pdev->cmd_len = 13; memcpy(pdev->cmd_buf, buf, 13); @@ -397,8 +395,8 @@ static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int fr if (ret < 0) return ret; - if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) - pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); +/* if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) + pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ pdev->cmd_len = 12; memcpy(pdev->cmd_buf, buf, 12); @@ -1100,7 +1098,7 @@ static inline int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) unsigned char buf[4]; /* set new relative angle; angles are expressed in degrees * 100, - but cam as .5 degree resolution, hence devide by 200. Also + but cam as .5 degree resolution, hence divide by 200. Also the angle must be multiplied by 64 before it's send to the cam (??) */ diff --git a/drivers/usb/media/pwc/pwc-dec1.c b/drivers/usb/media/pwc/pwc-dec1.c deleted file mode 100644 index 57d03d9178f6..000000000000 --- a/drivers/usb/media/pwc/pwc-dec1.c +++ /dev/null @@ -1,42 +0,0 @@ -/* Linux driver for Philips webcam - Decompression for chipset version 1 - (C) 2004 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - - - -#include "pwc-dec1.h" - - -void pwc_dec1_init(int type, int release, void *buffer, void *table) -{ - -} - -void pwc_dec1_exit(void) -{ - - - -} - diff --git a/drivers/usb/media/pwc/pwc-dec1.h b/drivers/usb/media/pwc/pwc-dec1.h deleted file mode 100644 index a7ffd9c45a2c..000000000000 --- a/drivers/usb/media/pwc/pwc-dec1.h +++ /dev/null @@ -1,36 +0,0 @@ -/* Linux driver for Philips webcam - (C) 2004 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - - - -#ifndef PWC_DEC1_H -#define PWC_DEC1_H - -void pwc_dec1_init(int type, int release, void *buffer, void *private_data); -void pwc_dec1_exit(void); - -#endif - - - diff --git a/drivers/usb/media/pwc/pwc-dec23.c b/drivers/usb/media/pwc/pwc-dec23.c deleted file mode 100644 index 98fa3f7a9eff..000000000000 --- a/drivers/usb/media/pwc/pwc-dec23.c +++ /dev/null @@ -1,623 +0,0 @@ -/* Linux driver for Philips webcam - Decompression for chipset version 2 et 3 - (C) 2004 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include "pwc-timon.h" -#include "pwc-kiara.h" -#include "pwc-dec23.h" -#include "pwc-ioctl.h" - -#include <linux/string.h> - -/**** - * - * - * - */ - - -static void fill_table_a000(unsigned int *p) -{ - static unsigned int initial_values[12] = { - 0xFFAD9B00, 0xFFDDEE00, 0x00221200, 0x00526500, - 0xFFC21E00, 0x003DE200, 0xFF924B80, 0xFFD2A300, - 0x002D5D00, 0x006DB480, 0xFFED3E00, 0x0012C200 - }; - static unsigned int values_derivated[12] = { - 0x0000A4CA, 0x00004424, 0xFFFFBBDC, 0xFFFF5B36, - 0x00007BC4, 0xFFFF843C, 0x0000DB69, 0x00005ABA, - 0xFFFFA546, 0xFFFF2497, 0x00002584, 0xFFFFDA7C - }; - unsigned int temp_values[12]; - int i,j; - - memcpy(temp_values,initial_values,sizeof(initial_values)); - for (i=0;i<256;i++) - { - for (j=0;j<12;j++) - { - *p++ = temp_values[j]; - temp_values[j] += values_derivated[j]; - } - } -} - -static void fill_table_d000(unsigned char *p) -{ - int bit,byte; - - for (bit=0; bit<8; bit++) - { - unsigned char bitpower = 1<<bit; - unsigned char mask = bitpower-1; - for (byte=0; byte<256; byte++) - { - if (byte & bitpower) - *p++ = -(byte & mask); - else - *p++ = (byte & mask); - } - } -} - -/* - * - * Kiara: 0 <= ver <= 7 - * Timon: 0 <= ver <= 15 - * - */ -static void fill_table_color(unsigned int version, const unsigned int *romtable, - unsigned char *p0004, - unsigned char *p8004) -{ - const unsigned int *table; - unsigned char *p0, *p8; - int i,j,k; - int dl,bit,pw; - - romtable += version*256; - - for (i=0; i<2; i++) - { - table = romtable + i*128; - - for (dl=0; dl<16; dl++) - { - p0 = p0004 + (i<<14) + (dl<<10); - p8 = p8004 + (i<<12) + (dl<<8); - - for (j=0; j<8; j++ , table++, p0+=128) - { - for (k=0; k<16; k++) - { - if (k==0) - bit=1; - else if (k>=1 && k<3) - bit=(table[0]>>15)&7; - else if (k>=3 && k<6) - bit=(table[0]>>12)&7; - else if (k>=6 && k<10) - bit=(table[0]>>9)&7; - else if (k>=10 && k<13) - bit=(table[0]>>6)&7; - else if (k>=13 && k<15) - bit=(table[0]>>3)&7; - else - bit=(table[0])&7; - if (k == 0) - *(unsigned char *)p8++ = 8; - else - *(unsigned char *)p8++ = j - bit; - *(unsigned char *)p8++ = bit; - - pw = 1<<bit; - p0[k+0x00] = (1*pw) + 0x80; - p0[k+0x10] = (2*pw) + 0x80; - p0[k+0x20] = (3*pw) + 0x80; - p0[k+0x30] = (4*pw) + 0x80; - p0[k+0x40] = (-pw) + 0x80; - p0[k+0x50] = (2*-pw) + 0x80; - p0[k+0x60] = (3*-pw) + 0x80; - p0[k+0x70] = (4*-pw) + 0x80; - } /* end of for (k=0; k<16; k++, p8++) */ - } /* end of for (j=0; j<8; j++ , table++) */ - } /* end of for (dl=0; dl<16; dl++) */ - } /* end of for (i=0; i<2; i++) */ -} - -/* - * precision = (pdev->xx + pdev->yy) - * - */ -static void fill_table_dc00_d800(unsigned int precision, unsigned int *pdc00, unsigned int *pd800) -{ - int i; - unsigned int offset1, offset2; - - for(i=0,offset1=0x4000, offset2=0; i<256 ; i++,offset1+=0x7BC4, offset2+=0x7BC4) - { - unsigned int msb = offset1 >> 15; - - if ( msb > 255) - { - if (msb) - msb=0; - else - msb=255; - } - - *pdc00++ = msb << precision; - *pd800++ = offset2; - } - -} - -/* - * struct { - * unsigned char op; // operation to execute - * unsigned char bits; // bits use to perform operation - * unsigned char offset1; // offset to add to access in the table_0004 % 16 - * unsigned char offset2; // offset to add to access in the table_0004 - * } - * - */ -static unsigned int table_ops[] = { -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x01,0x30, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x20, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x00, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x02,0x10, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x60, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x40, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x40, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x01,0x70, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x20, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x00, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x02,0x50, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x60, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x40, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x40, 0x01,0x00,0x00,0x00 -}; - -/* - * TODO: multiply by 4 all values - * - */ -static unsigned int MulIdx[256] = { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, 2, 3, - 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, - 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, 4, 4, 4, 4, - 6, 7, 8, 9, 7,10,11, 8, 8,11,10, 7, 9, 8, 7, 6, - 4, 5, 5, 4, 4, 5, 5, 4, 4, 5, 5, 4, 4, 5, 5, 4, - 1, 3, 0, 2, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3, 0, 2, - 0, 3, 3, 0, 1, 2, 2, 1, 2, 1, 1, 2, 3, 0, 0, 3, - 0, 1, 2, 3, 3, 2, 1, 0, 3, 2, 1, 0, 0, 1, 2, 3, - 1, 1, 1, 1, 3, 3, 3, 3, 0, 0, 0, 0, 2, 2, 2, 2, - 7,10,11, 8, 9, 8, 7, 6, 6, 7, 8, 9, 8,11,10, 7, - 4, 5, 5, 4, 5, 4, 4, 5, 5, 4, 4, 5, 4, 5, 5, 4, - 7, 9, 6, 8,10, 8, 7,11,11, 7, 8,10, 8, 6, 9, 7, - 1, 3, 0, 2, 2, 0, 3, 1, 2, 0, 3, 1, 1, 3, 0, 2, - 1, 2, 2, 1, 3, 0, 0, 3, 0, 3, 3, 0, 2, 1, 1, 2, -10, 8, 7,11, 8, 6, 9, 7, 7, 9, 6, 8,11, 7, 8,10 -}; - - - -void pwc_dec23_init(int type, int release, unsigned char *mode, void *data) -{ - int flags; - struct pwc_dec23_private *pdev = data; - release = release; - - switch (type) - { - case 720: - case 730: - case 740: - case 750: - flags = mode[2]&0x18; /* our: flags = 8, mode[2]==e8 */ - if (flags==8) - pdev->zz = 7; - else if (flags==0x10) - pdev->zz = 8; - else - pdev->zz = 6; - flags = mode[2]>>5; /* our: 7 */ - - fill_table_color(flags, (unsigned int *)KiaraRomTable, pdev->table_0004, pdev->table_8004); - break; - - - case 675: - case 680: - case 690: - flags = mode[2]&6; - if (flags==2) - pdev->zz = 7; - else if (flags==4) - pdev->zz = 8; - else - pdev->zz = 6; - flags = mode[2]>>3; - - fill_table_color(flags, (unsigned int *)TimonRomTable, pdev->table_0004, pdev->table_8004); - break; - - default: - /* Not supported */ - return; - } - - /* * * * ** */ - pdev->xx = 8 - pdev->zz; - pdev->yy = 15 - pdev->xx; - pdev->zzmask = 0xFF>>pdev->xx; - //pdev->zzmask = (1U<<pdev->zz)-1; - - - fill_table_dc00_d800(pdev->xx + pdev->yy, pdev->table_dc00, pdev->table_d800); - fill_table_a000(pdev->table_a004); - fill_table_d000(pdev->table_d004); -} - - -/* - * To manage the stream, we keep in a 32 bits variables, - * the next bits in the stream. fill_reservoir() add to - * the reservoir at least wanted nbits. - * - * - */ -#define fill_nbits(reservoir,nbits_in_reservoir,stream,nbits_wanted) do { \ - while (nbits_in_reservoir<nbits_wanted) \ - { \ - reservoir |= (*(stream)++) << nbits_in_reservoir; \ - nbits_in_reservoir+=8; \ - } \ -} while(0); - -#define get_nbits(reservoir,nbits_in_reservoir,stream,nbits_wanted,result) do { \ - fill_nbits(reservoir,nbits_in_reservoir,stream,nbits_wanted); \ - result = (reservoir) & ((1U<<nbits_wanted)-1); \ - reservoir >>= nbits_wanted; \ - nbits_in_reservoir -= nbits_wanted; \ -} while(0); - - - -static void DecompressBand23(const struct pwc_dec23_private *pdev, - const unsigned char *rawyuv, - unsigned char *planar_y, - unsigned char *planar_u, - unsigned char *planar_v, - unsigned int image_x, /* aka number of pixels wanted ??? */ - unsigned int pixels_per_line, /* aka number of pixels per line */ - int flags) -{ - - - unsigned int reservoir, nbits_in_reservoir; - int first_4_bits; - unsigned int bytes_per_channel; - int line_size; /* size of the line (4Y+U+V) */ - int passes; - const unsigned char *ptable0004, *ptable8004; - - int even_line; - unsigned int temp_colors[16]; - int nblocks; - - const unsigned char *stream; - unsigned char *dest_y, *dest_u=NULL, *dest_v=NULL; - unsigned int offset_to_plane_u, offset_to_plane_v; - - int i; - - - reservoir = 0; - nbits_in_reservoir = 0; - stream = rawyuv+1; /* The first byte of the stream is skipped */ - even_line = 1; - - get_nbits(reservoir,nbits_in_reservoir,stream,4,first_4_bits); - - line_size = pixels_per_line*3; - - for (passes=0;passes<2;passes++) - { - if (passes==0) - { - bytes_per_channel = pixels_per_line; - dest_y = planar_y; - nblocks = image_x/4; - } - else - { - /* Format planar: All Y, then all U, then all V */ - bytes_per_channel = pixels_per_line/2; - dest_u = planar_u; - dest_v = planar_v; - dest_y = dest_u; - nblocks = image_x/8; - } - - offset_to_plane_u = bytes_per_channel*2; - offset_to_plane_v = bytes_per_channel*3; - /* - printf("bytes_per_channel = %d\n",bytes_per_channel); - printf("offset_to_plane_u = %d\n",offset_to_plane_u); - printf("offset_to_plane_v = %d\n",offset_to_plane_v); - */ - - while (nblocks-->0) - { - unsigned int gray_index; - - fill_nbits(reservoir,nbits_in_reservoir,stream,16); - gray_index = reservoir & pdev->zzmask; - reservoir >>= pdev->zz; - nbits_in_reservoir -= pdev->zz; - - fill_nbits(reservoir,nbits_in_reservoir,stream,2); - - if ( (reservoir & 3) == 0) - { - reservoir>>=2; - nbits_in_reservoir-=2; - for (i=0;i<16;i++) - temp_colors[i] = pdev->table_dc00[gray_index]; - - } - else - { - unsigned int channel_v, offset1; - - /* swap bit 0 and 2 of offset_OR */ - channel_v = ((reservoir & 1) << 2) | (reservoir & 2) | ((reservoir & 4)>>2); - reservoir>>=3; - nbits_in_reservoir-=3; - - for (i=0;i<16;i++) - temp_colors[i] = pdev->table_d800[gray_index]; - - ptable0004 = pdev->table_0004 + (passes*16384) + (first_4_bits*1024) + (channel_v*128); - ptable8004 = pdev->table_8004 + (passes*4096) + (first_4_bits*256) + (channel_v*32); - - offset1 = 0; - while(1) - { - unsigned int index_in_table_ops, op, rows=0; - fill_nbits(reservoir,nbits_in_reservoir,stream,16); - - /* mode is 0,1 or 2 */ - index_in_table_ops = (reservoir&0x3F); - op = table_ops[ index_in_table_ops*4 ]; - if (op == 2) - { - reservoir >>= 2; - nbits_in_reservoir -= 2; - break; /* exit the while(1) */ - } - if (op == 0) - { - unsigned int shift; - - offset1 = (offset1 + table_ops[index_in_table_ops*4+2]) & 0x0F; - shift = table_ops[ index_in_table_ops*4+1 ]; - reservoir >>= shift; - nbits_in_reservoir -= shift; - rows = ptable0004[ offset1 + table_ops[index_in_table_ops*4+3] ]; - } - if (op == 1) - { - /* 10bits [ xxxx xxxx yyyy 000 ] - * yyy => offset in the table8004 - * xxx => offset in the tabled004 - */ - unsigned int mask, shift; - unsigned int col1, row1, total_bits; - - offset1 = (offset1 + ((reservoir>>3)&0x0F)+1) & 0x0F; - - col1 = (reservoir>>7) & 0xFF; - row1 = ptable8004 [ offset1*2 ]; - - /* Bit mask table */ - mask = pdev->table_d004[ (row1<<8) + col1 ]; - shift = ptable8004 [ offset1*2 + 1]; - rows = ((mask << shift) + 0x80) & 0xFF; - - total_bits = row1 + 8; - reservoir >>= total_bits; - nbits_in_reservoir -= total_bits; - } - { - const unsigned int *table_a004 = pdev->table_a004 + rows*12; - unsigned int *poffset = MulIdx + offset1*16; /* 64/4 (int) */ - for (i=0;i<16;i++) - { - temp_colors[i] += table_a004[ *poffset ]; - poffset++; - } - } - } - } -#define USE_SIGNED_INT_FOR_COLOR -#ifdef USE_SIGNED_INT_FOR_COLOR -# define CLAMP(x) ((x)>255?255:((x)<0?0:x)) -#else -# define CLAMP(x) ((x)>255?255:x) -#endif - - if (passes == 0) - { -#ifdef USE_SIGNED_INT_FOR_COLOR - const int *c = temp_colors; -#else - const unsigned int *c = temp_colors; -#endif - unsigned char *d; - - d = dest_y; - for (i=0;i<4;i++,c++) - *d++ = CLAMP((*c) >> pdev->yy); - - d = dest_y + bytes_per_channel; - for (i=0;i<4;i++,c++) - *d++ = CLAMP((*c) >> pdev->yy); - - d = dest_y + offset_to_plane_u; - for (i=0;i<4;i++,c++) - *d++ = CLAMP((*c) >> pdev->yy); - - d = dest_y + offset_to_plane_v; - for (i=0;i<4;i++,c++) - *d++ = CLAMP((*c) >> pdev->yy); - - dest_y += 4; - } - else if (passes == 1) - { -#ifdef USE_SIGNED_INT_FOR_COLOR - int *c1 = temp_colors; - int *c2 = temp_colors+4; -#else - unsigned int *c1 = temp_colors; - unsigned int *c2 = temp_colors+4; -#endif - unsigned char *d; - - d = dest_y; - for (i=0;i<4;i++,c1++,c2++) - { - *d++ = CLAMP((*c1) >> pdev->yy); - *d++ = CLAMP((*c2) >> pdev->yy); - } - c1 = temp_colors+12; - //c2 = temp_colors+8; - d = dest_y + bytes_per_channel; - for (i=0;i<4;i++,c1++,c2++) - { - *d++ = CLAMP((*c1) >> pdev->yy); - *d++ = CLAMP((*c2) >> pdev->yy); - } - - if (even_line) /* Each line, swap u/v */ - { - even_line=0; - dest_y = dest_v; - dest_u += 8; - } - else - { - even_line=1; - dest_y = dest_u; - dest_v += 8; - } - } - - } /* end of while (nblocks-->0) */ - - } /* end of for (passes=0;passes<2;passes++) */ - -} - - -/** - * - * image: size of the image wanted - * view : size of the image returned by the camera - * offset: (x,y) to displayer image in the view - * - * src: raw data - * dst: image output - * flags: PWCX_FLAG_PLANAR - * pdev: private buffer - * bandlength: - * - */ -void pwc_dec23_decompress(const struct pwc_coord *image, - const struct pwc_coord *view, - const struct pwc_coord *offset, - const void *src, - void *dst, - int flags, - const void *data, - int bandlength) -{ - const struct pwc_dec23_private *pdev = data; - unsigned char *pout, *pout_planar_y=NULL, *pout_planar_u=NULL, *pout_planar_v=NULL; - int i,n,stride,pixel_size; - - - if (flags & PWCX_FLAG_BAYER) - { - pout = dst + (view->x * offset->y) + offset->x; - pixel_size = view->x * 4; - } - else - { - n = view->x * view->y; - - /* offset in Y plane */ - stride = view->x * offset->y; - pout_planar_y = dst + stride + offset->x; - - /* offsets in U/V planes */ - stride = (view->x * offset->y)/4 + offset->x/2; - pout_planar_u = dst + n + + stride; - pout_planar_v = dst + n + n/4 + stride; - - pixel_size = view->x * 4; - } - - - for (i=0;i<image->y;i+=4) - { - if (flags & PWCX_FLAG_BAYER) - { - //TODO: - //DecompressBandBayer(pdev,src,pout,image.x,view->x,flags); - src += bandlength; - pout += pixel_size; - } - else - { - DecompressBand23(pdev,src,pout_planar_y,pout_planar_u,pout_planar_v,image->x,view->x,flags); - src += bandlength; - pout_planar_y += pixel_size; - pout_planar_u += view->x; - pout_planar_v += view->x; - } - } -} - -void pwc_dec23_exit(void) -{ - /* Do nothing */ - -} - diff --git a/drivers/usb/media/pwc/pwc-dec23.h b/drivers/usb/media/pwc/pwc-dec23.h deleted file mode 100644 index 5b2aacdefa6c..000000000000 --- a/drivers/usb/media/pwc/pwc-dec23.h +++ /dev/null @@ -1,58 +0,0 @@ -/* Linux driver for Philips webcam - (C) 2004 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef PWC_DEC23_H -#define PWC_DEC23_H - -struct pwc_dec23_private -{ - unsigned char xx,yy,zz,zzmask; - - unsigned char table_0004[2*0x4000]; - unsigned char table_8004[2*0x1000]; - unsigned int table_a004[256*12]; - - unsigned char table_d004[8*256]; - unsigned int table_d800[256]; - unsigned int table_dc00[256]; -}; - - -void pwc_dec23_init(int type, int release, unsigned char *buffer, void *private_data); -void pwc_dec23_exit(void); -void pwc_dec23_decompress(const struct pwc_coord *image, - const struct pwc_coord *view, - const struct pwc_coord *offset, - const void *src, - void *dst, - int flags, - const void *data, - int bandlength); - - - -#endif - - - diff --git a/drivers/usb/media/pwc/pwc-if.c b/drivers/usb/media/pwc/pwc-if.c index c53e2263b7fb..b77e65c03659 100644 --- a/drivers/usb/media/pwc/pwc-if.c +++ b/drivers/usb/media/pwc/pwc-if.c @@ -68,8 +68,6 @@ #include "pwc-ioctl.h" #include "pwc-kiara.h" #include "pwc-timon.h" -#include "pwc-dec23.h" -#include "pwc-dec1.h" #include "pwc-uncompress.h" /* Function prototypes and driver templates */ @@ -272,7 +270,7 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) return -ENXIO; } #endif - /* Allocate Isochronuous pipe buffers */ + /* Allocate Isochronous pipe buffers */ for (i = 0; i < MAX_ISO_BUFS; i++) { if (pdev->sbuf[i].data == NULL) { kbuf = kmalloc(ISO_BUFFER_SIZE, GFP_KERNEL); @@ -322,6 +320,7 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) case 730: case 740: case 750: +#if 0 Trace(TRACE_MEMORY,"private_data(%zu)\n",sizeof(struct pwc_dec23_private)); kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); /* Timon & Kiara */ break; @@ -330,11 +329,9 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) /* TODO & FIXME */ kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); break; +#endif + ; } - if (kbuf == NULL) { - Err("Failed to allocate decompress table.\n"); - return -ENOMEM; - } pdev->decompress_data = kbuf; /* Allocate image buffer; double buffer for mmap() */ @@ -850,7 +847,7 @@ static int pwc_isoc_init(struct pwc_device *pdev) if (pdev->vmax_packet_size < 0 || pdev->vmax_packet_size > ISO_MAX_FRAME_SIZE) { Err("Failed to find packet size for video endpoint in current alternate setting.\n"); - return -ENFILE; /* Odd error, that should be noticable */ + return -ENFILE; /* Odd error, that should be noticeable */ } /* Set alternate interface */ @@ -1131,11 +1128,11 @@ static int pwc_video_close(struct inode *inode, struct file *file) case 730: case 740: case 750: - pwc_dec23_exit(); /* Timon & Kiara */ +/* pwc_dec23_exit(); *//* Timon & Kiara */ break; case 645: case 646: - pwc_dec1_exit(); +/* pwc_dec1_exit(); */ break; } @@ -2128,7 +2125,7 @@ static int __init usb_pwc_init(void) if (leds[1] >= 0) led_off = leds[1]; - /* Big device node whoopla. Basicly, it allows you to assign a + /* Big device node whoopla. Basically, it allows you to assign a device node (/dev/videoX) to a camera, based on its type & serial number. The format is [type[.serialnumber]:]node. diff --git a/drivers/usb/media/pwc/pwc-ioctl.h b/drivers/usb/media/pwc/pwc-ioctl.h index 65805eaa9a1c..5f9cb08bc02e 100644 --- a/drivers/usb/media/pwc/pwc-ioctl.h +++ b/drivers/usb/media/pwc/pwc-ioctl.h @@ -75,7 +75,7 @@ #define PWC_FPS_SNAPSHOT 0x00400000 -/* structure for transfering x & y coordinates */ +/* structure for transferring x & y coordinates */ struct pwc_coord { int x, y; /* guess what */ diff --git a/drivers/usb/media/pwc/pwc-kiara.c b/drivers/usb/media/pwc/pwc-kiara.c index 5485800efd83..c498c68bace1 100644 --- a/drivers/usb/media/pwc/pwc-kiara.c +++ b/drivers/usb/media/pwc/pwc-kiara.c @@ -316,576 +316,3 @@ const struct Kiara_table_entry Kiara_table[PSZ_MAX][6][4] = }, }; - -/* - * Rom table for kiara chips - * - * 32 roms tables (one for each resolution ?) - * 2 tables per roms (one for each passes) (Y, and U&V) - * 128 bytes per passes - */ - -const unsigned int KiaraRomTable [8][2][16][8] = -{ - { /* version 0 */ - { /* version 0, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000001,0x00000001}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x0000124a,0x00009252,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00009252,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009292,0x00009292,0x00009493,0x000124db}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x0000a493,0x000124db,0x000124db,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x000124db,0x000126dc,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 0, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000001,0x00000009, - 0x00000009,0x00000009,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00001252}, - {0x00000000,0x00000000,0x00000049,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009252,0x00009292,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009292,0x00009292,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00009292, - 0x00009492,0x00009493,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009252,0x00009493, - 0x000126dc,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x000136e4,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 1 */ - { /* version 1, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000001}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009252,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00009252, - 0x00009492,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 1, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000009, - 0x00000049,0x00000009,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000000}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000049,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009252,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009292,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009292,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009292,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x0000924a,0x0000924a, - 0x00009492,0x00009493,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 2 */ - { /* version 2, passes 0 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009493,0x00009493,0x0000a49b}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000124db,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x000126dc,0x0001b724,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 2, passes 1 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x0000a49b,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00009252,0x0000a49b, - 0x0001249b,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 3 */ - { /* version 3, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000136e4,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x000136e4,0x0001b925,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 3, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 4 */ - { /* version 4, passes 0 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00009252,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009252,0x00009493, - 0x000124db,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009252,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x000136e4,0x0001b925,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 4, passes 1 */ - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000049,0x00000049,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00000249,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009252,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009252,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009493,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 5 */ - { /* version 5, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001c96e,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001c924,0x0002496d,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 5, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009252,0x00009252,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000126dc,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 6 */ - { /* version 6, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x00012492,0x000126db, - 0x0001c924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 6, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009252,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009292,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000126dc,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 7 */ - { /* version 7, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x0000a49b, - 0x0001249b,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b725,0x000124db}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000136e4,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001c96e,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b925}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b924,0x0001c92d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x00012492,0x000136db, - 0x00024924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 7, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x00009492,0x00009292,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000136db, - 0x0001b724,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000136db, - 0x0001b724,0x000126dc,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00009292,0x000136db, - 0x0001b724,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x0001c924,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - } -}; - diff --git a/drivers/usb/media/pwc/pwc-timon.c b/drivers/usb/media/pwc/pwc-timon.c index f950a4e5ed96..dee967173d6c 100644 --- a/drivers/usb/media/pwc/pwc-timon.c +++ b/drivers/usb/media/pwc/pwc-timon.c @@ -314,1133 +314,3 @@ const struct Timon_table_entry Timon_table[PSZ_MAX][6][4] = }, }; -/* - * 16 versions: - * 2 tables (one for Y, and one for U&V) - * 16 levels of details per tables - * 8 blocs - */ - -const unsigned int TimonRomTable [16][2][16][8] = -{ - { /* version 0 */ - { /* version 0, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000001}, - {0x00000000,0x00000000,0x00000001,0x00000001, - 0x00000001,0x00000001,0x00000001,0x00000001}, - {0x00000000,0x00000000,0x00000001,0x00000001, - 0x00000001,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000001, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000009,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x00000249,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x0000124a,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 0, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000001,0x00000001, - 0x00000001,0x00000001,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000009,0x00000001, - 0x00000001,0x00000009,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000009, - 0x00000009,0x00000049,0x00000001,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000009, - 0x00000009,0x00000049,0x00000001,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000249,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 1 */ - { /* version 1, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000001}, - {0x00000000,0x00000000,0x00000001,0x00000001, - 0x00000001,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000009,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00001252}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 1, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000001,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000009,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000001,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000049,0x00000249,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000249,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009252,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 2 */ - { /* version 2, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000001}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009252,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00009252, - 0x00009492,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 2, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000009, - 0x00000049,0x00000009,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000000}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000049,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009252,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009292,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009292,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009292,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x0000924a,0x0000924a, - 0x00009492,0x00009493,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 3 */ - { /* version 3, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x00000249,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009292,0x00009292,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009292,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00009252, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009292,0x0000a49b,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x0000a49b,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x0001b725,0x000136e4}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 3, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x00000049,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009252,0x00009292,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009493,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009493,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009493,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009292, - 0x0000a493,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 4 */ - { /* version 4, passes 0 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009493,0x00009493,0x0000a49b}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000124db,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x000126dc,0x0001b724,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 4, passes 1 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x0000a49b,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00009252,0x0000a49b, - 0x0001249b,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 5 */ - { /* version 5, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009292,0x00009292,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x000124db,0x000124db,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000126dc,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 5, passes 1 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x00009493,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x000124db,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009493,0x000124db,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x000124db,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x000126dc,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 6 */ - { /* version 6, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000136e4,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x000136e4,0x0001b925,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 6, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 7 */ - { /* version 7, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x0000a49b,0x000124db,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001c96e,0x0002496e}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x0001b925,0x0001c96e,0x0002496e}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x0002496d,0x00025bb6,0x00025bbf}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 7, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000136e4,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x000136e4,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00012492,0x000126db, - 0x0001b724,0x0001b925,0x0001b725,0x000136e4}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 8 */ - { /* version 8, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000126dc,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x00024b76,0x00024b77}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x0001b925,0x00024b76,0x00025bbf}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x000136e4,0x0001c92d,0x00024b76,0x00025bbf}, - {0x00000000,0x00000000,0x00012492,0x000136db, - 0x0001b724,0x00024b6d,0x0002ddb6,0x0002efff}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 8, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000126dc,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000136e4,0x0001b724,0x0001b725,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x0001b925,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x0001b925,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x0002496d,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 9 */ - { /* version 9, passes 0 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00009252,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009252,0x00009493, - 0x000124db,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009252,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x000136e4,0x0001b925,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 9, passes 1 */ - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000049,0x00000049,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00000249,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009252,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009252,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009493,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 10 */ - { /* version 10, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000124db,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000126dc,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009252,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000126dc,0x0001b925,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x000136e4,0x0002496d,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 10, passes 1 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00000249,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009252,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009493,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x00009493,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009493,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x00009492,0x00009493,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009493,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009252,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 11 */ - { /* version 11, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001c96e,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001c924,0x0002496d,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 11, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009252,0x00009252,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000126dc,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 12 */ - { /* version 12, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x00012492,0x000126db, - 0x0001c924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 12, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009252,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009292,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000126dc,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 13 */ - { /* version 13, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x0000a49b, - 0x0001249b,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b725,0x000124db}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000136e4,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001c96e,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b925}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b924,0x0001c92d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x00012492,0x000136db, - 0x00024924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 13, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x00009492,0x00009292,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000136db, - 0x0001b724,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000136db, - 0x0001b724,0x000126dc,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00009292,0x000136db, - 0x0001b724,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x0001c924,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 14 */ - { /* version 14, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x0000a49b, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000136e4,0x0001b725,0x000124db}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000126dc,0x0001b724,0x0001b92d,0x000126dc}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001b92d,0x000126dc}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001c92d,0x0001c96e,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x00024b76,0x0001b925}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x0001c92d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b924,0x0002496d,0x00024b76,0x00024b77}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x00024924,0x0002db6d,0x00036db6,0x0002efff}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 14, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009292,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000136e4,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000136e4,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000136e4,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000136e4,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000136e4,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000136e4,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000136e4,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x0001c924,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 15 */ - { /* version 15, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x0001b724,0x0001b92d,0x000126dc}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001c96e,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b925}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b924,0x0002496d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0002496d,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x00024b6d,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x00012492,0x000136db, - 0x0001c924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x00024924,0x0002db6d,0x00036db6,0x0002efff}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 15, passes 1 */ - {0x00000000,0x00000000,0x0000924a,0x0000924a, - 0x00009292,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000124db,0x0001b724,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x0001b724,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x0001b724,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00009292,0x000136db, - 0x0001b724,0x0001b724,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001c924,0x0001b724,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001c924,0x0001b724,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b724,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b925,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b925,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b925,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b925,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x00012492,0x000136db, - 0x0001c924,0x0001b925,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x00024924,0x0002496d,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - } -}; diff --git a/drivers/usb/media/pwc/pwc-uncompress.c b/drivers/usb/media/pwc/pwc-uncompress.c index c062e43b3ac5..bc3b1635eab0 100644 --- a/drivers/usb/media/pwc/pwc-uncompress.c +++ b/drivers/usb/media/pwc/pwc-uncompress.c @@ -29,8 +29,6 @@ #include "pwc.h" #include "pwc-uncompress.h" -#include "pwc-dec1.h" -#include "pwc-dec23.h" int pwc_decompress(struct pwc_device *pdev) { @@ -122,6 +120,7 @@ int pwc_decompress(struct pwc_device *pdev) switch (pdev->type) { +#if 0 case 675: case 680: case 690: @@ -137,6 +136,7 @@ int pwc_decompress(struct pwc_device *pdev) case 645: case 646: /* TODO & FIXME */ +#endif return -ENXIO; /* No such device or address: missing decompressor */ break; } diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index dd4580cb57e0..7d06105763d4 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -859,7 +859,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device info ("udev is NULL."); } - /* allocate memory for our device state and intialize it */ + /* allocate memory for our device state and initialize it */ dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL); diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig index db64c908d4a7..b104430e2c6a 100644 --- a/drivers/usb/net/Kconfig +++ b/drivers/usb/net/Kconfig @@ -219,17 +219,21 @@ config USB_EPSON2888 by some sample firmware from Epson. config USB_ZAURUS - boolean "Sharp Zaurus (stock ROMs)" + boolean "Sharp Zaurus (stock ROMs) and compatible" depends on USB_USBNET select CRC32 default y help Choose this option to support the usb networking links used by Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500. - - If you install an alternate ROM image, you may no longer need - to support this protocol. Only the "eth-fd" driver really needs - this non-conformant variant of CDC Ethernet protocol. + This also supports some related device firmware, as used in some + PDAs from Olympus and some cell phones from Motorola. + + If you install an alternate ROM image, such as the Linux 2.6 based + versions of OpenZaurus, you should no longer need to support this + protocol. Only the "eth-fd" or "net_fd" drivers in these devices + really need this non-conformant variant of CDC Ethernet (or in + some cases CDC MDLM) protocol, not "g_ether". config USB_CDCETHER boolean "CDC Ethernet support (smart devices such as cable modems)" diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index a45ea7c97356..4cbb408af727 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -1517,6 +1517,26 @@ static void cdc_unbind (struct usbnet *dev, struct usb_interface *intf) } } +#endif /* NEED_GENERIC_CDC */ + + +#ifdef CONFIG_USB_CDCETHER +#define HAVE_HARDWARE + +/*------------------------------------------------------------------------- + * + * Communications Device Class, Ethernet Control model + * + * Takes two interfaces. The DATA interface is inactive till an altsetting + * is selected. Configuration data includes class descriptors. + * + * This should interop with whatever the 2.4 "CDCEther.c" driver + * (by Brad Hards) talked with. + * + *-------------------------------------------------------------------------*/ + +#include <linux/ctype.h> + static void dumpspeed (struct usbnet *dev, __le32 *speeds) { @@ -1567,26 +1587,6 @@ static void cdc_status (struct usbnet *dev, struct urb *urb) } } -#endif /* NEED_GENERIC_CDC */ - - -#ifdef CONFIG_USB_CDCETHER -#define HAVE_HARDWARE - -/*------------------------------------------------------------------------- - * - * Communications Device Class, Ethernet Control model - * - * Takes two interfaces. The DATA interface is inactive till an altsetting - * is selected. Configuration data includes class descriptors. - * - * This should interop with whatever the 2.4 "CDCEther.c" driver - * (by Brad Hards) talked with. - * - *-------------------------------------------------------------------------*/ - -#include <linux/ctype.h> - static u8 nibble (unsigned char c) { if (likely (isdigit (c))) @@ -2765,7 +2765,7 @@ static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf) } /* expect bcdVersion 1.0, ignore */ if (memcmp(&desc->bGUID, blan_guid, 16) - || memcmp(&desc->bGUID, blan_guid, 16) ) { + && memcmp(&desc->bGUID, safe_guid, 16) ) { /* hey, this one might _really_ be MDLM! */ dev_dbg (&intf->dev, "MDLM guid\n"); goto bad_desc; @@ -2797,11 +2797,13 @@ static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf) * - bPad (ignored, for PADAFTER -- BLAN-only) * bits are: * - 0x01 -- Zaurus framing (add CRC) - * - 0x02 -- PADBEFORE - * - 0x04 -- PADAFTER + * - 0x02 -- PADBEFORE (CRC includes some padding) + * - 0x04 -- PADAFTER (some padding after CRC) * - 0x08 -- "fermat" packet mangling (for hw bugs) + * the PADBEFORE appears not to matter; we interop + * with devices that use it and those that don't. */ - if (detail->bDetailData[1] != 0x01) { + if ((detail->bDetailData[1] & ~02) != 0x01) { /* bmDataCapabilites == 0 would be fine too, * but framing is minidriver-coupled for now. */ diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index f98cb2af024e..341ae5f732dd 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -183,7 +183,7 @@ static void zd1201_usbtx(struct urb *urb, struct pt_regs *regs) return; } -/* Incomming data */ +/* Incoming data */ static void zd1201_usbrx(struct urb *urb, struct pt_regs *regs) { struct zd1201 *zd = urb->context; @@ -772,7 +772,7 @@ static int zd1201_net_stop(struct net_device *dev) /* RFC 1042 encapsulates Ethernet frames in 802.11 frames by prefixing them with 0xaa, 0xaa, 0x03) followed by a SNAP OID of 0 - (0x00, 0x00, 0x00). Zd requires an additionnal padding, copy + (0x00, 0x00, 0x00). Zd requires an additional padding, copy of ethernet addresses, length of the standard RFC 1042 packet and a command byte (which is nul for tx). @@ -1098,7 +1098,7 @@ static int zd1201_get_range(struct net_device *dev, /* Little bit of magic here: we only get the quality if we poll * for it, and we never get an actual request to trigger such - * a poll. Therefore we 'asume' that the user will soon ask for + * a poll. Therefore we 'assume' that the user will soon ask for * the stats after asking the bssid. */ static int zd1201_get_wap(struct net_device *dev, @@ -1108,7 +1108,7 @@ static int zd1201_get_wap(struct net_device *dev, unsigned char buffer[6]; if (!zd1201_getconfig(zd, ZD1201_RID_COMMSQUALITY, buffer, 6)) { - /* Unfortunatly the quality and noise reported is useless. + /* Unfortunately the quality and noise reported is useless. they seem to be accumulators that increase until you read them, unless we poll on a fixed interval we can't use them diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 0c4aa00bb39d..9438909e87a5 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -53,6 +53,15 @@ config USB_SERIAL_GENERIC support" be compiled as a module for this driver to be used properly. +config USB_SERIAL_AIRPRIME + tristate "USB AirPrime CDMA Wireless Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a AirPrime CDMA Wireless PC card. + + To compile this driver as a module, choose M here: the + module will be called airprime. + config USB_SERIAL_BELKIN tristate "USB Belkin and Peracom Single Port Serial Driver" depends on USB_SERIAL @@ -446,6 +455,17 @@ config USB_SERIAL_XIRCOM To compile this driver as a module, choose M here: the module will be called keyspan_pda. +config USB_SERIAL_OPTION + tristate "USB Option PCMCIA serial driver" + depends on USB_SERIAL && USB_OHCI_HCD && PCCARD + help + Say Y here if you want to use an Option card. This is a + GSM card, controlled by three serial ports which are connected + via an OHCI adapter located on a PC card. + + To compile this driver as a module, choose M here: the + module will be called option. + config USB_SERIAL_OMNINET tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index b0aac47d1959..6c7cdcc99a9e 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -11,6 +11,7 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) +obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o @@ -31,6 +32,7 @@ obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o +obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c new file mode 100644 index 000000000000..a4ce0008d69b --- /dev/null +++ b/drivers/usb/serial/airprime.c @@ -0,0 +1,63 @@ +/* + * AirPrime CDMA Wireless Serial USB driver + * + * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include "usb-serial.h" + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0xf3d, 0x0112) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver airprime_driver = { + .owner = THIS_MODULE, + .name = "airprime", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static struct usb_serial_device_type airprime_device = { + .owner = THIS_MODULE, + .name = "airprime", + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, +}; + +static int __init airprime_init(void) +{ + int retval; + + retval = usb_serial_register(&airprime_device); + if (retval) + return retval; + retval = usb_register(&airprime_driver); + if (retval) + usb_serial_deregister(&airprime_device); + return retval; +} + +static void __exit airprime_exit(void) +{ + usb_deregister(&airprime_driver); + usb_serial_deregister(&airprime_device); +} + +module_init(airprime_init); +module_exit(airprime_exit); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 7e9bb63eb466..4ace9964fc6b 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -7,6 +7,14 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * + * Support to set flow control line levels using TIOCMGET and TIOCMSET + * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow + * control thanks to Munir Nassar nassarmu@real-time.com + * + * Outstanding Issues: + * Buffers are not flushed when the port is opened. + * Multiple calls to write() may fail with "Resource temporarily unavailable" + * */ #include <linux/config.h> @@ -24,7 +32,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.03" +#define DRIVER_VERSION "v0.04" #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" /* @@ -35,6 +43,9 @@ static void cp2101_cleanup(struct usb_serial_port*); static void cp2101_close(struct usb_serial_port*, struct file*); static void cp2101_get_termios(struct usb_serial_port*); static void cp2101_set_termios(struct usb_serial_port*, struct termios*); +static int cp2101_tiocmget (struct usb_serial_port *, struct file *); +static int cp2101_tiocmset (struct usb_serial_port *, struct file *, + unsigned int, unsigned int); static void cp2101_break_ctl(struct usb_serial_port*, int); static int cp2101_startup (struct usb_serial *); static void cp2101_shutdown(struct usb_serial*); @@ -43,9 +54,10 @@ static void cp2101_shutdown(struct usb_serial*); static int debug; static struct usb_device_id id_table [] = { - {USB_DEVICE(0x10c4, 0xea60) }, /*Silicon labs factory default*/ - {USB_DEVICE(0x10ab, 0x10c5) }, /*Siemens MC60 Cable*/ - { } /* Terminating Entry*/ + { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ + { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ + { } /* Terminating Entry */ }; MODULE_DEVICE_TABLE (usb, id_table); @@ -70,32 +82,35 @@ static struct usb_serial_device_type cp2101_device = { .close = cp2101_close, .break_ctl = cp2101_break_ctl, .set_termios = cp2101_set_termios, + .tiocmget = cp2101_tiocmget, + .tiocmset = cp2101_tiocmset, .attach = cp2101_startup, .shutdown = cp2101_shutdown, }; -/*Config request types*/ +/* Config request types */ #define REQTYPE_HOST_TO_DEVICE 0x41 #define REQTYPE_DEVICE_TO_HOST 0xc1 -/*Config SET requests. To GET, add 1 to the request number*/ -#define CP2101_UART 0x00 /*Enable / Disable*/ -#define CP2101_BAUDRATE 0x01 /*(BAUD_RATE_GEN_FREQ / baudrate)*/ -#define CP2101_BITS 0x03 /*0x(0)(data bits)(parity)(stop bits)*/ -#define CP2101_BREAK 0x05 /*On / Off*/ -#define CP2101_DTRRTS 0x07 /*101 / 202 ???*/ -#define CP2101_CONFIG_16 0x13 /*16 bytes of config data ???*/ -#define CP2101_CONFIG_6 0x19 /*6 bytes of config data ???*/ +/* Config SET requests. To GET, add 1 to the request number */ +#define CP2101_UART 0x00 /* Enable / Disable */ +#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */ +#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */ +#define CP2101_BREAK 0x05 /* On / Off */ +#define CP2101_CONTROL 0x07 /* Flow control line states */ +#define CP2101_MODEMCTL 0x13 /* Modem controls */ +#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */ -/*CP2101_UART*/ +/* CP2101_UART */ #define UART_ENABLE 0x0001 #define UART_DISABLE 0x0000 -/*CP2101_BAUDRATE*/ +/* CP2101_BAUDRATE */ #define BAUD_RATE_GEN_FREQ 0x384000 -/*CP2101_BITS*/ +/* CP2101_BITS */ #define BITS_DATA_MASK 0X0f00 +#define BITS_DATA_5 0X0500 #define BITS_DATA_6 0X0600 #define BITS_DATA_7 0X0700 #define BITS_DATA_8 0X0800 @@ -112,64 +127,137 @@ static struct usb_serial_device_type cp2101_device = { #define BITS_STOP_1 0x0000 #define BITS_STOP_1_5 0x0001 #define BITS_STOP_2 0x0002 + +/* CP2101_BREAK */ #define BREAK_ON 0x0000 #define BREAK_OFF 0x0001 +/* CP2101_CONTROL */ +#define CONTROL_DTR 0x0001 +#define CONTROL_RTS 0x0002 +#define CONTROL_CTS 0x0010 +#define CONTROL_DSR 0x0020 +#define CONTROL_RING 0x0040 +#define CONTROL_DCD 0x0080 +#define CONTROL_WRITE_DTR 0x0100 +#define CONTROL_WRITE_RTS 0x0200 -static int cp2101_get_config(struct usb_serial_port* port, u8 request) +/* + * cp2101_get_config + * Reads from the CP2101 configuration registers + * 'size' is specified in bytes. + * 'data' is a pointer to a pre-allocated array of integers large + * enough to hold 'size' bytes (with 4 bytes to each integer) + */ +static int cp2101_get_config(struct usb_serial_port* port, u8 request, + unsigned int *data, int size) { struct usb_serial *serial = port->serial; - unsigned char buf[4]; - unsigned int value; - int result, i; + u32 *buf; + int result, i, length; + + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1)/4; + + buf = kmalloc (length * sizeof(u32), GFP_KERNEL); + memset(buf, 0, length * sizeof(u32)); + + if (!buf) { + dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__); + return -ENOMEM; + } - /*For get requests, the request number must be incremented*/ + /* For get requests, the request number must be incremented */ request++; - /*Issue the request, attempting to read 4 bytes*/ + /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0), request, REQTYPE_DEVICE_TO_HOST, 0x0000, - 0, buf, 4, 300); + 0, buf, size, 300); - if (result < 0) { - dev_err(&port->dev, "%s - Unable to send config request, " - "request=0x%x result=%d\n", - __FUNCTION__, request, result); - return result; - } + /* Convert data into an array of integers */ + for (i=0; i<length; i++) + data[i] = le32_to_cpu(buf[i]); - /*Assemble each byte read into an integer value*/ - value = 0; - for (i=0; i<4 && i<result; i++) - value |= (buf[i] << (i * 8)); + kfree(buf); - dbg( " %s - request=0x%x result=%d value=0x%x", - __FUNCTION__, request, result, value); + if (result != size) { + dev_err(&port->dev, "%s - Unable to send config request, " + "request=0x%x size=%d result=%d\n", + __FUNCTION__, request, size, result); + return -EPROTO; + } - return value; + return 0; } -static int cp2101_set_config(struct usb_serial_port* port, u8 request, u16 value) +/* + * cp2101_set_config + * Writes to the CP2101 configuration registers + * Values less than 16 bits wide are sent directly + * 'size' is specified in bytes. + */ +static int cp2101_set_config(struct usb_serial_port* port, u8 request, + unsigned int *data, int size) { struct usb_serial *serial = port->serial; - int result; - result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_DEVICE, value, - 0, NULL, 0, 300); + u32 *buf; + int result, i, length; - if (result <0) { - dev_err(&port->dev, "%s - Unable to send config request, " - "request=0x%x value=0x%x result=%d\n", - __FUNCTION__, request, value, result); - return result; + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1)/4; + + buf = kmalloc(length * sizeof(u32), GFP_KERNEL); + if (!buf) { + dev_err(&port->dev, "%s - out of memory.\n", + __FUNCTION__); + return -ENOMEM; + } + + /* Array of integers into bytes */ + for (i = 0; i < length; i++) + buf[i] = cpu_to_le32(data[i]); + + if (size > 2) { + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, 0x0000, + 0, buf, size, 300); + } else { + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, data[0], + 0, NULL, 0, 300); } - dbg(" %s - request=0x%x value=0x%x result=%d", - __FUNCTION__, request, value, result); + kfree(buf); + + if ((size > 2 && result != size) || result < 0) { + dev_err(&port->dev, "%s - Unable to send request, " + "request=0x%x size=%d result=%d\n", + __FUNCTION__, request, size, result); + return -EPROTO; + } + /* Single data value */ + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, data[0], + 0, NULL, 0, 300); return 0; } +/* + * cp2101_set_config_single + * Convenience function for calling cp2101_set_config on single data values + * without requiring an integer pointer + */ +static inline int cp2101_set_config_single(struct usb_serial_port* port, + u8 request, unsigned int data) +{ + return cp2101_set_config(port, request, &data, 2); +} + static int cp2101_open (struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; @@ -177,7 +265,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __FUNCTION__, port->number); - if (cp2101_set_config(port, CP2101_UART, UART_ENABLE)) { + if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", __FUNCTION__); return -EPROTO; @@ -198,9 +286,12 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) return result; } - /*Configure the termios structure*/ + /* Configure the termios structure */ cp2101_get_termios(port); + /* Set the DTR and RTS pins low */ + cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0); + return 0; } @@ -228,16 +319,18 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp) usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); - cp2101_set_config(port, CP2101_UART, UART_DISABLE); + cp2101_set_config_single(port, CP2101_UART, UART_DISABLE); } -/* cp2101_get_termios*/ -/* Reads the baud rate, data bits, parity and stop bits from the device*/ -/* Corrects any unsupported values*/ -/* Configures the termios structure to reflect the state of the device*/ +/* + * cp2101_get_termios + * Reads the baud rate, data bits, parity, stop bits and flow control mode + * from the device, corrects any unsupported values, and configures the + * termios structure to reflect the state of the device + */ static void cp2101_get_termios (struct usb_serial_port *port) { - unsigned int cflag; + unsigned int cflag, modem_ctl[4]; int baud; int bits; @@ -249,15 +342,16 @@ static void cp2101_get_termios (struct usb_serial_port *port) } cflag = port->tty->termios->c_cflag; - baud = cp2101_get_config(port, CP2101_BAUDRATE); - /*Convert to baudrate*/ + cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); + /* Convert to baudrate */ if (baud) baud = BAUD_RATE_GEN_FREQ / baud; dbg("%s - baud rate = %d", __FUNCTION__, baud); cflag &= ~CBAUD; switch (baud) { - /* The baud rates which are commented out below + /* + * The baud rates which are commented out below * appear to be supported by the device * but are non-standard */ @@ -284,14 +378,18 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - Baud rate is not supported, " "using 9600 baud", __FUNCTION__); cflag |= B9600; - cp2101_set_config(port, CP2101_BAUDRATE, + cp2101_set_config_single(port, CP2101_BAUDRATE, (BAUD_RATE_GEN_FREQ/9600)); break; } - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); cflag &= ~CSIZE; switch(bits & BITS_DATA_MASK) { + case BITS_DATA_5: + dbg("%s - data bits = 5", __FUNCTION__); + cflag |= CS5; + break; case BITS_DATA_6: dbg("%s - data bits = 6", __FUNCTION__); cflag |= CS6; @@ -310,7 +408,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; default: dbg("%s - Unknown number of data bits, " @@ -318,7 +416,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } @@ -341,21 +439,21 @@ static void cp2101_get_termios (struct usb_serial_port *port) "disabling parity)", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, " "disabling parity)", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; default: dbg("%s - Unknown parity mode, " "disabling parity", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } @@ -366,9 +464,9 @@ static void cp2101_get_termios (struct usb_serial_port *port) break; case BITS_STOP_1_5: dbg("%s - stop bits = 1.5 (not supported, " - "using 1 stop bit", __FUNCTION__); + "using 1 stop bit)", __FUNCTION__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_STOP_2: dbg("%s - stop bits = 2", __FUNCTION__); @@ -378,10 +476,19 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - Unknown number of stop bits, " "using 1 stop bit", __FUNCTION__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } + cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + if (modem_ctl[0] & 0x0008) { + dbg("%s - flow control = CRTSCTS", __FUNCTION__); + cflag |= CRTSCTS; + } else { + dbg("%s - flow control = NONE", __FUNCTION__); + cflag &= ~CRTSCTS; + } + port->tty->termios->c_cflag = cflag; } @@ -389,8 +496,8 @@ static void cp2101_set_termios (struct usb_serial_port *port, struct termios *old_termios) { unsigned int cflag, old_cflag=0; - int baud=0; - int bits; + int baud=0, bits; + unsigned int modem_ctl[4]; dbg("%s - port %d", __FUNCTION__, port->number); @@ -400,7 +507,7 @@ static void cp2101_set_termios (struct usb_serial_port *port, } cflag = port->tty->termios->c_cflag; - /* check that they really want us to change something */ + /* Check that they really want us to change something */ if (old_termios) { if ((cflag == old_termios->c_cflag) && (RELEVANT_IFLAG(port->tty->termios->c_iflag) @@ -415,7 +522,8 @@ static void cp2101_set_termios (struct usb_serial_port *port, /* If the baud rate is to be updated*/ if ((cflag & CBAUD) != (old_cflag & CBAUD)) { switch (cflag & CBAUD) { - /* The baud rates which are commented out below + /* + * The baud rates which are commented out below * appear to be supported by the device * but are non-standard */ @@ -448,18 +556,22 @@ static void cp2101_set_termios (struct usb_serial_port *port, if (baud) { dbg("%s - Setting baud rate to %d baud", __FUNCTION__, baud); - if (cp2101_set_config(port, CP2101_BAUDRATE, + if (cp2101_set_config_single(port, CP2101_BAUDRATE, (BAUD_RATE_GEN_FREQ / baud))) dev_err(&port->dev, "Baud rate requested not " "supported by device\n"); } } - /*If the number of data bits is to be updated*/ + /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { + case CS5: + bits |= BITS_DATA_5; + dbg("%s - data bits = 5", __FUNCTION__); + break; case CS6: bits |= BITS_DATA_6; dbg("%s - data bits = 6", __FUNCTION__); @@ -483,13 +595,13 @@ static void cp2101_set_termios (struct usb_serial_port *port, bits |= BITS_DATA_8; break; } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Number of data bits requested " "not supported by device\n"); } if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & PARODD) { @@ -500,13 +612,13 @@ static void cp2101_set_termios (struct usb_serial_port *port, dbg("%s - parity = EVEN", __FUNCTION__); } } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Parity mode not supported " "by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -515,15 +627,90 @@ static void cp2101_set_termios (struct usb_serial_port *port, bits |= BITS_STOP_1; dbg("%s - stop bits = 1", __FUNCTION__); } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Number of stop bits requested " "not supported by device\n"); } + + if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { + cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", + __FUNCTION__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + + if (cflag & CRTSCTS) { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x09; + modem_ctl[1] = 0x80; + dbg("%s - flow control = CRTSCTS", __FUNCTION__); + } else { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x01; + modem_ctl[1] |= 0x40; + dbg("%s - flow control = NONE", __FUNCTION__); + } + + dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", + __FUNCTION__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); + } + +} + +static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + int control = 0; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (set & TIOCM_RTS) { + control |= CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (set & TIOCM_DTR) { + control |= CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + if (clear & TIOCM_RTS) { + control &= ~CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (clear & TIOCM_DTR) { + control &= ~CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + + dbg("%s - control = 0x%.4x", __FUNCTION__, control); + + return cp2101_set_config(port, CP2101_CONTROL, &control, 2); + +} + +static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file) +{ + int control, result; + + dbg("%s - port %d", __FUNCTION__, port->number); + + cp2101_get_config(port, CP2101_CONTROL, &control, 1); + + result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) + |((control & CONTROL_RTS) ? TIOCM_RTS : 0) + |((control & CONTROL_CTS) ? TIOCM_CTS : 0) + |((control & CONTROL_DSR) ? TIOCM_DSR : 0) + |((control & CONTROL_RING)? TIOCM_RI : 0) + |((control & CONTROL_DCD) ? TIOCM_CD : 0); + + dbg("%s - control = 0x%.2x", __FUNCTION__, control); + + return result; } static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) { - u16 state; + int state; dbg("%s - port %d", __FUNCTION__, port->number); if (break_state == 0) @@ -532,12 +719,12 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP2101_BREAK, state); + cp2101_set_config(port, CP2101_BREAK, &state, 2); } static int cp2101_startup (struct usb_serial *serial) { - /*CP2101 buffers behave strangely unless device is reset*/ + /* CP2101 buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); return 0; } @@ -548,7 +735,7 @@ static void cp2101_shutdown (struct usb_serial *serial) dbg("%s", __FUNCTION__); - /* stop reads and writes on all ports */ + /* Stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { cp2101_cleanup(serial->port[i]); } @@ -560,16 +747,16 @@ static int __init cp2101_init (void) retval = usb_serial_register(&cp2101_device); if (retval) - return retval; /*Failed to register*/ + return retval; /* Failed to register */ retval = usb_register(&cp2101_driver); if (retval) { - /*Failed to register*/ + /* Failed to register */ usb_serial_deregister(&cp2101_device); return retval; } - /*Success*/ + /* Success */ info(DRIVER_DESC " " DRIVER_VERSION); return 0; } diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index d165f42d560d..012e63e05806 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -16,6 +16,14 @@ * See http://geocities.com/i0xox0i for information on this driver and the * earthmate usb device. * + * Lonnie Mendez <dignome@gmail.com> + * 4-29-2005 + * Fixed problem where setting or retreiving the serial config would fail with + * EPIPE. Removed CRTS toggling so the driver behaves more like other usbserial + * adapters. Issued new interval of 1ms instead of the default 10ms. As a + * result, transfer speed has been substantially increased. From avg. 850bps to + * avg. 3300bps. initial termios has also been modified. Cleaned up code and + * formatting issues so it is more readable. Replaced the C++ style comments. * * Lonnie Mendez <dignome@gmail.com> * 12-15-2004 @@ -32,12 +40,6 @@ * 10-2003 * Driver first released. * - * - * Long Term TODO: - * Improve transfer speeds - both read/write are somewhat slow - * at this point. - * Improve debugging. Show modem line status with debug output and - * implement filtering for certain data as a module parameter. */ /* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */ @@ -72,11 +74,12 @@ static int debug; #endif static int stats; +static int interval; /* * Version Information */ -#define DRIVER_VERSION "v1.08" +#define DRIVER_VERSION "v1.09" #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>" #define DRIVER_DESC "Cypress USB to Serial Driver" @@ -86,6 +89,7 @@ static int stats; static struct usb_device_id id_table_earthmate [] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { } /* Terminating entry */ }; @@ -96,6 +100,7 @@ static struct usb_device_id id_table_cyphidcomrs232 [] = { static struct usb_device_id id_table_combined [] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { } /* Terminating entry */ }; @@ -130,7 +135,6 @@ struct cypress_private { char prev_status, diff_status; /* used for TIOCMIWAIT */ /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */ struct termios tmp_termios; /* stores the old termios settings */ - char calledfromopen; /* used when issuing lines on open - fixes rts drop bug */ }; /* write buffer structure */ @@ -168,10 +172,8 @@ static void cypress_buf_free(struct cypress_buf *cb); static void cypress_buf_clear(struct cypress_buf *cb); static unsigned int cypress_buf_data_avail(struct cypress_buf *cb); static unsigned int cypress_buf_space_avail(struct cypress_buf *cb); -static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, - unsigned int count); -static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, - unsigned int count); +static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count); +static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count); static struct usb_serial_device_type cypress_earthmate_device = { @@ -234,14 +236,13 @@ static struct usb_serial_device_type cypress_hidcom_device = { *****************************************************************************/ -/* This function can either set or retreive the current serial line settings */ +/* This function can either set or retrieve the current serial line settings */ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits, int parity_enable, int parity_type, int reset, int cypress_request_type) { - int i, n_baud_rate = 0, retval = 0; + int new_baudrate = 0, retval = 0, tries = 0; struct cypress_private *priv; - __u8 feature_buffer[5]; - __u8 config; + __u8 feature_buffer[8]; unsigned long flags; dbg("%s", __FUNCTION__); @@ -256,7 +257,8 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m * of 57600bps (I have no idea whether DeLorme chose to use the general purpose * firmware or not), if you need to modify this speed setting for your own * project please add your own chiptype and modify the code likewise. The - * Cypress HID->COM device will work successfully up to 115200bps. + * Cypress HID->COM device will work successfully up to 115200bps (but the + * actual throughput is around 3kBps). */ if (baud_mask != priv->cbr_mask) { dbg("%s - baud rate is changing", __FUNCTION__); @@ -265,109 +267,114 @@ static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_m * but are not used with NMEA and SiRF protocols */ if ( (baud_mask == B300) || (baud_mask == B600) ) { - err("%s - failed setting baud rate, unsupported speed (default to 4800)", + err("%s - failed setting baud rate, unsupported speed", __FUNCTION__); - n_baud_rate = 4800; - } else if ( (n_baud_rate = mask_to_rate(baud_mask)) == -1) { - err("%s - failed setting baud rate, unsupported speed (default to 4800)", + new_baudrate = priv->baud_rate; + } else if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) { + err("%s - failed setting baud rate, unsupported speed", __FUNCTION__); - n_baud_rate = 4800; + new_baudrate = priv->baud_rate; } } else if (priv->chiptype == CT_CYPHIDCOM) { - if ( (n_baud_rate = mask_to_rate(baud_mask)) == -1) { - err("%s - failed setting baud rate, unsupported speed (default to 4800)", + if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) { + err("%s - failed setting baud rate, unsupported speed", __FUNCTION__); - n_baud_rate = 4800; + new_baudrate = priv->baud_rate; } } else if (priv->chiptype == CT_GENERIC) { - if ( (n_baud_rate = mask_to_rate(baud_mask)) == -1) { - err("%s - failed setting baud rate, unsupported speed (default to 4800)", + if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) { + err("%s - failed setting baud rate, unsupported speed", __FUNCTION__); - n_baud_rate = 4800; + new_baudrate = priv->baud_rate; } } else { - info("%s - please define your chiptype, using 4800bps default", __FUNCTION__); - n_baud_rate = 4800; + info("%s - please define your chiptype", __FUNCTION__); + new_baudrate = priv->baud_rate; } } else { /* baud rate not changing, keep the old */ - n_baud_rate = priv->baud_rate; + new_baudrate = priv->baud_rate; } - dbg("%s - baud rate is being sent as %d", __FUNCTION__, n_baud_rate); - + dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate); - /* - * This algorithm accredited to Jiang Jay Zhang... thanks for all the help! - */ - for (i = 0; i < 4; ++i) { - feature_buffer[i] = ( n_baud_rate >> (i*8) & 0xFF ); - } + memset(feature_buffer, 0, 8); + /* fill the feature_buffer with new configuration */ + *((u_int32_t *)feature_buffer) = new_baudrate; - config = 0; // reset config byte - config |= data_bits; // assign data bits in 2 bit space ( max 3 ) + feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */ /* 1 bit gap */ - config |= (stop_bits << 3); // assign stop bits in 1 bit space - config |= (parity_enable << 4); // assign parity flag in 1 bit space - config |= (parity_type << 5); // assign parity type in 1 bit space + feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */ + feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */ + feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */ /* 1 bit gap */ - config |= (reset << 7); // assign reset at end of byte, 1 bit space - - feature_buffer[4] = config; + feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */ dbg("%s - device is being sent this feature report:", __FUNCTION__); dbg("%s - %02X - %02X - %02X - %02X - %02X", __FUNCTION__, feature_buffer[0], feature_buffer[1], feature_buffer[2], feature_buffer[3], feature_buffer[4]); + do { retval = usb_control_msg (port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, - 0x0300, 0, feature_buffer, 5, 500); + 0x0300, 0, feature_buffer, 8, 500); + + if (tries++ >= 3) + break; - if (retval != 5) + if (retval == EPIPE) + usb_clear_halt(port->serial->dev, 0x00); + } while (retval != 8 && retval != ENODEV); + + if (retval != 8) err("%s - failed sending serial line settings - %d", __FUNCTION__, retval); else { spin_lock_irqsave(&priv->lock, flags); - priv->baud_rate = n_baud_rate; + priv->baud_rate = new_baudrate; priv->cbr_mask = baud_mask; - priv->current_config = config; - ++priv->cmd_count; + priv->current_config = feature_buffer[4]; spin_unlock_irqrestore(&priv->lock, flags); } break; case CYPRESS_GET_CONFIG: dbg("%s - retreiving serial line settings", __FUNCTION__); - /* reset values in feature buffer */ - memset(feature_buffer, 0, 5); + /* set initial values in feature buffer */ + memset(feature_buffer, 0, 8); + do { retval = usb_control_msg (port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS, - 0x0300, 0, feature_buffer, 5, 500); + 0x0300, 0, feature_buffer, 8, 500); + + if (tries++ >= 3) + break; + + if (retval == EPIPE) + usb_clear_halt(port->serial->dev, 0x00); + } while (retval != 5 && retval != ENODEV); + if (retval != 5) { err("%s - failed to retreive serial line settings - %d", __FUNCTION__, retval); return retval; } else { spin_lock_irqsave(&priv->lock, flags); + /* store the config in one byte, and later use bit masks to check values */ priv->current_config = feature_buffer[4]; - /* reverse the process above to get the baud_mask value */ - n_baud_rate = 0; // reset bits - for (i = 0; i < 4; ++i) { - n_baud_rate |= ( feature_buffer[i] << (i*8) ); - } + priv->baud_rate = *((u_int32_t *)feature_buffer); - priv->baud_rate = n_baud_rate; - if ( (priv->cbr_mask = rate_to_mask(n_baud_rate)) == 0x40) + if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40) dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__); - ++priv->cmd_count; spin_unlock_irqrestore(&priv->lock, flags); } - break; - default: - err("%s - unsupported serial control command issued", __FUNCTION__); } + spin_lock_irqsave(&priv->lock, flags); + ++priv->cmd_count; + spin_unlock_irqrestore(&priv->lock, flags); + return retval; } /* cypress_serial_control */ -/* given a baud mask, it will return speed on success */ +/* given a baud mask, it will return integer baud on success */ static int mask_to_rate (unsigned mask) { int rate; @@ -438,11 +445,12 @@ static int generic_startup (struct usb_serial *serial) usb_reset_configuration (serial->dev); + interval = 1; priv->cmd_ctrl = 0; priv->line_control = 0; priv->termios_initialized = 0; - priv->calledfromopen = 0; priv->rx_flags = 0; + priv->cbr_mask = B300; usb_set_serial_port_data(serial->port[0], priv); return (0); @@ -513,7 +521,6 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __FUNCTION__, port->number); /* clear halts before open */ - usb_clear_halt(serial->dev, 0x00); usb_clear_halt(serial->dev, 0x81); usb_clear_halt(serial->dev, 0x02); @@ -531,7 +538,6 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp) /* raise both lines and set termios */ spin_lock_irqsave(&priv->lock, flags); priv->line_control = CONTROL_DTR | CONTROL_RTS; - priv->calledfromopen = 1; priv->cmd_ctrl = 1; spin_unlock_irqrestore(&priv->lock, flags); result = cypress_write(port, NULL, 0); @@ -553,7 +559,7 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp) usb_fill_int_urb(port->interrupt_in_urb, serial->dev, usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length, - cypress_read_int_callback, port, port->interrupt_in_urb->interval); + cypress_read_int_callback, port, interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result){ @@ -680,12 +686,12 @@ static void cypress_send(struct usb_serial_port *port) spin_lock_irqsave(&priv->lock, flags); switch (port->interrupt_out_size) { case 32: - // this is for the CY7C64013... + /* this is for the CY7C64013... */ offset = 2; port->interrupt_out_buffer[0] = priv->line_control; break; case 8: - // this is for the CY7C63743... + /* this is for the CY7C63743... */ offset = 1; port->interrupt_out_buffer[0] = priv->line_control; break; @@ -738,6 +744,7 @@ send: port->interrupt_out_urb->transfer_buffer_length = actual_size; port->interrupt_out_urb->dev = port->serial->dev; + port->interrupt_out_urb->interval = interval; result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC); if (result) { dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, @@ -910,7 +917,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o unsigned cflag, iflag, baud_mask; unsigned long flags; __u8 oldlines; - int linechange; + int linechange = 0; dbg("%s - port %d", __FUNCTION__, port->number); @@ -996,15 +1003,7 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o case B115200: dbg("%s - setting baud 115200bps", __FUNCTION__); break; default: dbg("%s - unknown masked baud rate", __FUNCTION__); } - priv->line_control |= CONTROL_DTR; - - /* toggle CRTSCTS? - don't do this if being called from cypress_open */ - if (!priv->calledfromopen) { - if (cflag & CRTSCTS) - priv->line_control |= CONTROL_RTS; - else - priv->line_control &= ~CONTROL_RTS; - } + priv->line_control = (CONTROL_DTR | CONTROL_RTS); } spin_unlock_irqrestore(&priv->lock, flags); @@ -1014,8 +1013,6 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o cypress_serial_control(port, baud_mask, data_bits, stop_bits, parity_enable, parity_type, 0, CYPRESS_SET_CONFIG); - msleep(50); /* give some time between change and read (50ms) */ - /* we perform a CYPRESS_GET_CONFIG so that the current settings are filled into the private structure * this should confirm that all is working if it returns what we just set */ cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG); @@ -1031,7 +1028,6 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o dbg("Using custom termios settings for a baud rate of 4800bps."); /* define custom termios settings for NMEA protocol */ - tty->termios->c_iflag /* input modes - */ &= ~(IGNBRK /* disable ignore break */ | BRKINT /* disable break causes interrupt */ @@ -1052,23 +1048,16 @@ static void cypress_set_termios (struct usb_serial_port *port, struct termios *o | ISIG /* disable interrupt, quit, and suspend special characters */ | IEXTEN); /* disable non-POSIX special characters */ - } else if (priv->chiptype == CT_CYPHIDCOM) { - - // Software app handling it for device... + } /* CT_CYPHIDCOM: Application should handle this for device */ - } linechange = (priv->line_control != oldlines); spin_unlock_irqrestore(&priv->lock, flags); /* if necessary, set lines */ - if (!priv->calledfromopen && linechange) { + if (linechange) { priv->cmd_ctrl = 1; cypress_write(port, NULL, 0); } - - if (priv->calledfromopen) - priv->calledfromopen = 0; - } /* cypress_set_termios */ @@ -1164,7 +1153,7 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs) spin_lock_irqsave(&priv->lock, flags); switch(urb->actual_length) { case 32: - // This is for the CY7C64013... + /* This is for the CY7C64013... */ priv->current_status = data[0] & 0xF8; bytes = data[1]+2; i=2; @@ -1172,7 +1161,7 @@ static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs) havedata = 1; break; case 8: - // This is for the CY7C63743... + /* This is for the CY7C63743... */ priv->current_status = data[0] & 0xF8; bytes = (data[0] & 0x07)+1; i=1; @@ -1245,7 +1234,7 @@ continue_read: port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length, cypress_read_int_callback, port, - port->interrupt_in_urb->interval); + interval); result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result); @@ -1274,6 +1263,8 @@ static void cypress_write_int_callback(struct urb *urb, struct pt_regs *regs) dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); priv->write_urb_in_use = 0; return; + case -EPIPE: /* no break needed */ + usb_clear_halt(port->serial->dev, 0x02); default: /* error in the urb, so we have to resubmit it */ dbg("%s - Overflow in write", __FUNCTION__); @@ -1535,3 +1526,5 @@ module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); module_param(stats, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(stats, "Enable statistics or not"); +module_param(interval, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(interval, "Overrides interrupt interval"); diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 1012ee6b19ce..1fa119efe41a 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -13,6 +13,7 @@ /* DeLorme Earthmate USB - a GPS device */ #define VENDOR_ID_DELORME 0x1163 #define PRODUCT_ID_EARTHMATEUSB 0x0100 +#define PRODUCT_ID_EARTHMATEUSB_LT20 0x0200 /* Cypress HID->COM RS232 Adapter */ #define VENDOR_ID_CYPRESS 0x04b4 diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 4c788c767a97..3bfcc7b9f861 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -76,7 +76,7 @@ * Defererence pointers after any paranoid checks, not before. * * (21/Jun/2003) Erik Nygren - * Added support for Home Electronics Tira-1 IR tranceiver using FT232BM chip. + * Added support for Home Electronics Tira-1 IR transceiver using FT232BM chip. * See <http://www.home-electro.com/tira1.htm>. Only operates properly * at 100000 and RTS-CTS, so set custom divisor mode on startup. * Also force the Tira-1 and USB-UIRT to only use their custom baud rates. @@ -91,7 +91,7 @@ * Minor whitespace and comment changes. * * (12/Jun/2003) David Norwood - * Added support for USB-UIRT IR tranceiver using 8U232AM chip. + * Added support for USB-UIRT IR transceiver using 8U232AM chip. * See <http://home.earthlink.net/~jrhees/USBUIRT/index.htm>. Only * operates properly at 312500, so set custom divisor mode on startup. * @@ -264,7 +264,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.4.1" +#define DRIVER_VERSION "v1.4.2" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>" #define DRIVER_DESC "USB FTDI Serial Converters Driver" @@ -272,6 +272,7 @@ static int debug; static struct usb_device_id id_table_sio [] = { { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, + { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, { } /* Terminating entry */ }; @@ -296,7 +297,6 @@ static struct usb_device_id id_table_8U232AM [] = { { USB_DEVICE_VER(FTDI_VID, FTDI_IRTRANS_PID, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_ALT_PID, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0, 0x3ff) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, @@ -364,16 +364,20 @@ static struct usb_device_id id_table_8U232AM [] = { { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) }, { USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) }, { USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) }, { USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_RM_VID, FTDI_RMCANVIEW_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_RM_CANVIEW_PID, 0, 0x3ff) }, { USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0, 0x3ff) }, { USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0, 0x3ff) }, { USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, EVER_ECO_PRO_CDS, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID, 0, 0x3ff) }, { } /* Terminating entry */ }; @@ -382,7 +386,6 @@ static struct usb_device_id id_table_FT232BM [] = { { USB_DEVICE_VER(FTDI_VID, FTDI_IRTRANS_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_ALT_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0x400, 0xffff) }, @@ -473,6 +476,7 @@ static struct usb_device_id id_table_FT232BM [] = { { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) }, @@ -485,11 +489,15 @@ static struct usb_device_id id_table_FT232BM [] = { { USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_RM_VID, FTDI_RMCANVIEW_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_RM_CANVIEW_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, EVER_ECO_PRO_CDS, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID, 0x400, 0xffff) }, { } /* Terminating entry */ }; @@ -517,7 +525,6 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_ALT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, @@ -596,7 +603,24 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) }, { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) }, { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E808_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E809_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80A_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80B_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80C_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80D_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80E_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80F_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E888_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E889_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88A_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88B_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88C_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88D_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) }, @@ -609,11 +633,16 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) }, { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) }, - { USB_DEVICE(FTDI_RM_VID, FTDI_RMCANVIEW_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) }, { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) }, { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) }, + { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) }, + { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID, 0x400, 0xffff) }, { } /* Terminating entry */ }; @@ -658,6 +687,8 @@ struct ftdi_private { char prev_status, diff_status; /* Used for TIOCMIWAIT */ __u8 rx_flags; /* receive state flags (throttling) */ spinlock_t rx_lock; /* spinlock for receive state */ + struct work_struct rx_work; + int rx_processed; __u16 interface; /* FT2232C port interface (0 for FT232/245) */ @@ -688,7 +719,7 @@ static int ftdi_write_room (struct usb_serial_port *port); static int ftdi_chars_in_buffer (struct usb_serial_port *port); static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs); static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs); -static void ftdi_process_read (struct usb_serial_port *port); +static void ftdi_process_read (void *param); static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old); static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file); static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear); @@ -1358,6 +1389,8 @@ static int ftdi_common_startup (struct usb_serial *serial) port->read_urb->transfer_buffer_length = BUFSZ; } + INIT_WORK(&priv->rx_work, ftdi_process_read, port); + /* Free port's existing write urb and transfer buffer. */ if (port->write_urb) { usb_free_urb (port->write_urb); @@ -1457,10 +1490,10 @@ static int ftdi_FT2232C_startup (struct usb_serial *serial) inter = serial->interface->altsetting->desc.bInterfaceNumber; if (inter) { - priv->interface = INTERFACE_B; + priv->interface = PIT_SIOB; } else { - priv->interface = INTERFACE_A; + priv->interface = PIT_SIOA; } priv->baud_base = 48000000 / 2; /* Would be / 16, but FT2232C supports multiple of 0.125 divisor fractions! */ @@ -1588,6 +1621,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) spin_unlock_irqrestore(&priv->rx_lock, flags); /* Start reading from the device */ + priv->rx_processed = 0; usb_fill_bulk_urb(port->read_urb, dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, @@ -1638,6 +1672,10 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp) err("Error from RTS LOW urb"); } } /* Note change no line if hupcl is off */ + + /* cancel any scheduled reading */ + cancel_delayed_work(&priv->rx_work); + flush_scheduled_work(); /* shutdown our bulk read */ if (port->read_urb) @@ -1833,23 +1871,14 @@ static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs) return; } - /* If throttled, delay receive processing until unthrottled. */ - spin_lock(&priv->rx_lock); - if (priv->rx_flags & THROTTLED) { - dbg("Deferring read urb processing until unthrottled"); - priv->rx_flags |= ACTUALLY_THROTTLED; - spin_unlock(&priv->rx_lock); - return; - } - spin_unlock(&priv->rx_lock); - ftdi_process_read(port); } /* ftdi_read_bulk_callback */ -static void ftdi_process_read (struct usb_serial_port *port) +static void ftdi_process_read (void *param) { /* ftdi_process_read */ + struct usb_serial_port *port = (struct usb_serial_port*)param; struct urb *urb; struct tty_struct *tty; struct ftdi_private *priv; @@ -1860,6 +1889,7 @@ static void ftdi_process_read (struct usb_serial_port *port) int result; int need_flip; int packet_offset; + unsigned long flags; dbg("%s - port %d", __FUNCTION__, port->number); @@ -1886,12 +1916,18 @@ static void ftdi_process_read (struct usb_serial_port *port) data = urb->transfer_buffer; - /* The first two bytes of every read packet are status */ - if (urb->actual_length > 2) { - usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + if (priv->rx_processed) { + dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__, + priv->rx_processed, + urb->actual_length - priv->rx_processed); } else { - dbg("Status only: %03oo %03oo",data[0],data[1]); - } + /* The first two bytes of every read packet are status */ + if (urb->actual_length > 2) { + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data); + } else { + dbg("Status only: %03oo %03oo",data[0],data[1]); + } + } /* TO DO -- check for hung up line and handle appropriately: */ @@ -1900,8 +1936,12 @@ static void ftdi_process_read (struct usb_serial_port *port) /* if CD is dropped and the line is not CLOCAL then we should hangup */ need_flip = 0; - for (packet_offset=0; packet_offset < urb->actual_length; packet_offset += PKTSZ) { + for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) { + int length; + /* Compare new line status to the old one, signal if different */ + /* N.B. packet may be processed more than once, but differences + * are only processed once. */ if (priv != NULL) { char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK; if (new_status != priv->prev_status) { @@ -1911,6 +1951,35 @@ static void ftdi_process_read (struct usb_serial_port *port) } } + length = min(PKTSZ, urb->actual_length-packet_offset)-2; + if (length < 0) { + err("%s - bad packet length: %d", __FUNCTION__, length+2); + length = 0; + } + + /* have to make sure we don't overflow the buffer + with tty_insert_flip_char's */ + if (tty->flip.count+length > TTY_FLIPBUF_SIZE) { + tty_flip_buffer_push(tty); + need_flip = 0; + + if (tty->flip.count != 0) { + /* flip didn't work, this happens when ftdi_process_read() is + * called from ftdi_unthrottle, because TTY_DONT_FLIP is set */ + dbg("%s - flip buffer push failed", __FUNCTION__); + break; + } + } + if (priv->rx_flags & THROTTLED) { + dbg("%s - throttled", __FUNCTION__); + break; + } + if (tty->ldisc.receive_room(tty)-tty->flip.count < length) { + /* break out & wait for throttling/unthrottling to happen */ + dbg("%s - receive room low", __FUNCTION__); + break; + } + /* Handle errors and break */ error_flag = TTY_NORMAL; /* Although the device uses a bitmask and hence can have multiple */ @@ -1933,13 +2002,8 @@ static void ftdi_process_read (struct usb_serial_port *port) error_flag = TTY_FRAME; dbg("FRAMING error"); } - if (urb->actual_length > packet_offset + 2) { - for (i = 2; (i < PKTSZ) && ((i+packet_offset) < urb->actual_length); ++i) { - /* have to make sure we don't overflow the buffer - with tty_insert_flip_char's */ - if(tty->flip.count >= TTY_FLIPBUF_SIZE) { - tty_flip_buffer_push(tty); - } + if (length > 0) { + for (i = 2; i < length+2; i++) { /* Note that the error flag is duplicated for every character received since we don't know which character it applied to */ @@ -1976,6 +2040,35 @@ static void ftdi_process_read (struct usb_serial_port *port) tty_flip_buffer_push(tty); } + if (packet_offset < urb->actual_length) { + /* not completely processed - record progress */ + priv->rx_processed = packet_offset; + dbg("%s - incomplete, %d bytes processed, %d remain", + __FUNCTION__, packet_offset, + urb->actual_length - packet_offset); + /* check if we were throttled while processing */ + spin_lock_irqsave(&priv->rx_lock, flags); + if (priv->rx_flags & THROTTLED) { + priv->rx_flags |= ACTUALLY_THROTTLED; + spin_unlock_irqrestore(&priv->rx_lock, flags); + dbg("%s - deferring remainder until unthrottled", + __FUNCTION__); + return; + } + spin_unlock_irqrestore(&priv->rx_lock, flags); + /* if the port is closed stop trying to read */ + if (port->open_count > 0){ + /* delay processing of remainder */ + schedule_delayed_work(&priv->rx_work, 1); + } else { + dbg("%s - port is closed", __FUNCTION__); + } + return; + } + + /* urb is completely processed */ + priv->rx_processed = 0; + /* if the port is closed stop trying to read */ if (port->open_count > 0){ /* Continue trying to always read */ @@ -2415,7 +2508,7 @@ static void ftdi_unthrottle (struct usb_serial_port *port) spin_unlock_irqrestore(&priv->rx_lock, flags); if (actually_throttled) - ftdi_process_read(port); + schedule_work(&priv->rx_work); } static int __init ftdi_init (void) diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index be5d60bf90b9..8866376823a5 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -26,7 +26,6 @@ #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ -#define FTDI_8U232AM_ALT_ALT_PID 0xf3c0 /* FTDI's second alternate PID for above */ #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ @@ -137,7 +136,7 @@ /* * Home Electronics (www.home-electro.com) USB gadgets */ -#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR tranceiver */ +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ @@ -145,6 +144,8 @@ /* ELV USB Module UO100 (PID sent by Stefan Frings) */ #define FTDI_ELV_UO100_PID 0xFB58 /* Product Id */ +/* ELV USB Module UM100 (PID sent by Arnim Laeuger) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* Product Id */ /* * Definitions for ID TECH (www.idt-net.com) devices @@ -157,7 +158,8 @@ */ #define OCT_VID 0x0B39 /* OCT vendor ID */ /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ -/* Also rebadged as SIIG Inc. model US2308 */ +/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ +/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ /* an infrared receiver for user access control with IR tags */ @@ -236,10 +238,10 @@ /* * RM Michaelides CANview USB (http://www.rmcan.com) - * CAN filedbus interface adapter, addad by port GmbH www.port.de) + * CAN fieldbus interface adapter, added by port GmbH www.port.de) + * Ian Abbott changed the macro names for consistency. */ -#define FTDI_RM_VID 0x0403 /* Vendor Id */ -#define FTDI_RMCANVIEW_PID 0xfd60 /* Product Id */ +#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ /* * EVER Eco Pro UPS (http://www.ever.com.pl/) @@ -247,6 +249,26 @@ #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ +/* + * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, + * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices + * and I'm not entirely sure which are used by which. + */ +#define FTDI_4N_GALAXY_DE_0_PID 0x8372 +#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 +#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 + +/* + * Mobility Electronics products. + */ +#define MOBILITY_VID 0x1342 +#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ + +/* + * Active Robots product ids. + */ +#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ @@ -259,10 +281,6 @@ #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ -/* Port interface code for FT2232C */ -#define INTERFACE_A 1 -#define INTERFACE_B 2 - /* * BmRequestType: 1100 0000b diff --git a/drivers/usb/serial/io_usbvend.h b/drivers/usb/serial/io_usbvend.h index 8c1fa5e722b1..f1804fd5a3dd 100644 --- a/drivers/usb/serial/io_usbvend.h +++ b/drivers/usb/serial/io_usbvend.h @@ -289,7 +289,7 @@ // // -// Edgeport Compatiblity Descriptor +// Edgeport Compatibility Descriptor // // This descriptor is only returned by Edgeport-compatible devices // supporting the EPiC spec. True ION devices do not return this diff --git a/drivers/usb/serial/keyspan_usa90msg.h b/drivers/usb/serial/keyspan_usa90msg.h index dd935b62c1a8..86708ecd8735 100644 --- a/drivers/usb/serial/keyspan_usa90msg.h +++ b/drivers/usb/serial/keyspan_usa90msg.h @@ -19,7 +19,7 @@ This file is available under a BSD-style copyright - 2. The name of InnoSys Incorprated may not be used to endorse or promote + 2. The name of InnoSys Incorporated may not be used to endorse or promote products derived from this software without specific prior written permission. diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c new file mode 100644 index 000000000000..b722175f108f --- /dev/null +++ b/drivers/usb/serial/option.c @@ -0,0 +1,729 @@ +/* + Option Card (PCMCIA to) USB to Serial Driver + + Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de> + + This driver is free software; you can redistribute it and/or modify + it under the terms of Version 2 of the GNU General Public License as + published by the Free Software Foundation. + + Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> + + History: + + 2005-05-19 v0.1 Initial version, based on incomplete docs + and analysis of misbehavior of the standard driver + 2005-05-20 v0.2 Extended the input buffer to avoid losing + random 64-byte chunks of data + 2005-05-21 v0.3 implemented chars_in_buffer() + turned on low_latency + simplified the code somewhat +*/ +#define DRIVER_VERSION "v0.3" +#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" +#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver" + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/usb.h> +#include "usb-serial.h" + +/* Function prototypes */ +static int option_open (struct usb_serial_port *port, struct file *filp); +static void option_close (struct usb_serial_port *port, struct file *filp); +static int option_startup (struct usb_serial *serial); +static void option_shutdown (struct usb_serial *serial); +static void option_rx_throttle (struct usb_serial_port *port); +static void option_rx_unthrottle (struct usb_serial_port *port); +static int option_write_room (struct usb_serial_port *port); + +static void option_instat_callback(struct urb *urb, struct pt_regs *regs); + + +static int option_write (struct usb_serial_port *port, + const unsigned char *buf, int count); + +static int option_chars_in_buffer (struct usb_serial_port *port); +static int option_ioctl (struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg); +static void option_set_termios (struct usb_serial_port *port, + struct termios *old); +static void option_break_ctl (struct usb_serial_port *port, int break_state); +static int option_tiocmget (struct usb_serial_port *port, struct file *file); +static int option_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear); +static int option_send_setup (struct usb_serial_port *port); + +/* Vendor and product IDs */ +#define OPTION_VENDOR_ID 0x0AF0 + +#define OPTION_PRODUCT_OLD 0x5000 +#define OPTION_PRODUCT_WLAN 0x6000 + +static struct usb_device_id option_ids[] = { + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, option_ids); + +static struct usb_driver option_driver = { + .owner = THIS_MODULE, + .name = "option", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = option_ids, +}; + +/* The card has three separate interfaces, wich the serial driver + * recognizes separately, thus num_port=1. + */ +static struct usb_serial_device_type option_3port_device = { + .owner = THIS_MODULE, + .name = "Option 3-port card", + .short_name = "option", + .id_table = option_ids, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, /* 3 */ + .open = option_open, + .close = option_close, + .write = option_write, + .write_room = option_write_room, + .chars_in_buffer = option_chars_in_buffer, + .throttle = option_rx_throttle, + .unthrottle = option_rx_unthrottle, + .ioctl = option_ioctl, + .set_termios = option_set_termios, + .break_ctl = option_break_ctl, + .tiocmget = option_tiocmget, + .tiocmset = option_tiocmset, + .attach = option_startup, + .shutdown = option_shutdown, + .read_int_callback = option_instat_callback, +}; + +static int debug; + +/* per port private data */ + +#define N_IN_URB 4 +#define N_OUT_URB 1 +#define IN_BUFLEN 1024 +#define OUT_BUFLEN 1024 + +struct option_port_private { + /* Input endpoints and buffer for this port */ + struct urb *in_urbs[N_IN_URB]; + char in_buffer[N_IN_URB][IN_BUFLEN]; + /* Output endpoints and buffer for this port */ + struct urb *out_urbs[N_OUT_URB]; + char out_buffer[N_OUT_URB][OUT_BUFLEN]; + + /* Settings for the port */ + int rts_state; /* Handshaking pins (outputs) */ + int dtr_state; + int cts_state; /* Handshaking pins (inputs) */ + int dsr_state; + int dcd_state; + int ri_state; + // int break_on; + + unsigned long tx_start_time[N_OUT_URB]; +}; + + +/* Functions used by new usb-serial code. */ +static int __init +option_init (void) +{ + int retval; + retval = usb_serial_register(&option_3port_device); + if (retval) + goto failed_3port_device_register; + retval = usb_register(&option_driver); + if (retval) + goto failed_driver_register; + + info(DRIVER_DESC ": " DRIVER_VERSION); + + return 0; + +failed_driver_register: + usb_serial_deregister (&option_3port_device); +failed_3port_device_register: + return retval; +} + +static void __exit +option_exit (void) +{ + usb_deregister (&option_driver); + usb_serial_deregister (&option_3port_device); +} + +module_init(option_init); +module_exit(option_exit); + +static void +option_rx_throttle (struct usb_serial_port *port) +{ + dbg("%s", __FUNCTION__); +} + + +static void +option_rx_unthrottle (struct usb_serial_port *port) +{ + dbg("%s", __FUNCTION__); +} + + +static void +option_break_ctl (struct usb_serial_port *port, int break_state) +{ + /* Unfortunately, I don't know how to send a break */ + dbg("%s", __FUNCTION__); +} + + +static void +option_set_termios (struct usb_serial_port *port, + struct termios *old_termios) +{ + dbg("%s", __FUNCTION__); + + option_send_setup(port); +} + +static int +option_tiocmget(struct usb_serial_port *port, struct file *file) +{ + unsigned int value; + struct option_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + value = ((portdata->rts_state) ? TIOCM_RTS : 0) | + ((portdata->dtr_state) ? TIOCM_DTR : 0) | + ((portdata->cts_state) ? TIOCM_CTS : 0) | + ((portdata->dsr_state) ? TIOCM_DSR : 0) | + ((portdata->dcd_state) ? TIOCM_CAR : 0) | + ((portdata->ri_state) ? TIOCM_RNG : 0); + + return value; +} + +static int +option_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + struct option_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + if (set & TIOCM_RTS) + portdata->rts_state = 1; + if (set & TIOCM_DTR) + portdata->dtr_state = 1; + + if (clear & TIOCM_RTS) + portdata->rts_state = 0; + if (clear & TIOCM_DTR) + portdata->dtr_state = 0; + return option_send_setup(port); +} + +static int +option_ioctl (struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return -ENOIOCTLCMD; +} + +/* Write */ +static int +option_write(struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct option_port_private *portdata; + int i; + int left, todo; + struct urb *this_urb = NULL; /* spurious */ + int err; + + portdata = usb_get_serial_port_data(port); + + dbg("%s: write (%d chars)", __FUNCTION__, count); + +#if 0 + spin_lock(&port->lock); + if (port->write_urb_busy) { + spin_unlock(&port->lock); + dbg("%s: already writing", __FUNCTION__); + return 0; + } + port->write_urb_busy = 1; + spin_unlock(&port->lock); +#endif + + i = 0; + left = count; + while (left>0) { + todo = left; + if (todo > OUT_BUFLEN) + todo = OUT_BUFLEN; + + for (;i < N_OUT_URB; i++) { + /* Check we have a valid urb/endpoint before we use it... */ + this_urb = portdata->out_urbs[i]; + if (this_urb->status != -EINPROGRESS) + break; + if (this_urb->transfer_flags & URB_ASYNC_UNLINK) + continue; + if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ)) + continue; + this_urb->transfer_flags |= URB_ASYNC_UNLINK; + usb_unlink_urb(this_urb); + } + + if (i == N_OUT_URB) { + /* no bulk out free! */ + dbg("%s: no output urb -- left %d", __FUNCTION__,count-left); +#if 0 + port->write_urb_busy = 0; +#endif + return count-left; + } + + dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i); + + memcpy (this_urb->transfer_buffer, buf, todo); + + /* send the data out the bulk port */ + this_urb->transfer_buffer_length = todo; + + this_urb->transfer_flags &= ~URB_ASYNC_UNLINK; + this_urb->dev = port->serial->dev; + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err) { + dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status); + continue; + } + portdata->tx_start_time[i] = jiffies; + buf += todo; + left -= todo; + } + + count -= left; +#if 0 + port->write_urb_busy = 0; +#endif + dbg("%s: wrote (did %d)", __FUNCTION__, count); + return count; +} + +static void +option_indat_callback (struct urb *urb, struct pt_regs *regs) +{ + int i, err; + int endpoint; + struct usb_serial_port *port; + struct tty_struct *tty; + unsigned char *data = urb->transfer_buffer; + + dbg("%s: %p", __FUNCTION__, urb); + + endpoint = usb_pipeendpoint(urb->pipe); + port = (struct usb_serial_port *) urb->context; + + if (urb->status) { + dbg("%s: nonzero status: %d on endpoint %02x.", + __FUNCTION__, urb->status, endpoint); + } else { + tty = port->tty; + if (urb->actual_length) { + for (i = 0; i < urb->actual_length ; ++i) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + tty_flip_buffer_push(tty); + tty_insert_flip_char(tty, data[i], 0); + } + tty_flip_buffer_push(tty); + } else { + dbg("%s: empty read urb received", __FUNCTION__); + } + + /* Resubmit urb so we continue receiving */ + if (port->open_count && urb->status != -ESHUTDOWN) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err); + } + } + return; +} + +static void +option_outdat_callback (struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port; + + dbg("%s", __FUNCTION__); + + port = (struct usb_serial_port *) urb->context; + + if (port->open_count) + schedule_work(&port->work); +} + +static void +option_instat_callback (struct urb *urb, struct pt_regs *regs) +{ + int err; + struct usb_serial_port *port = (struct usb_serial_port *) urb->context; + struct option_port_private *portdata = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + + dbg("%s", __FUNCTION__); + dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata); + + if (urb->status == 0) { + struct usb_ctrlrequest *req_pkt = + (struct usb_ctrlrequest *)urb->transfer_buffer; + + if (!req_pkt) { + dbg("%s: NULL req_pkt\n", __FUNCTION__); + return; + } + if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) { + int old_dcd_state; + unsigned char signals = *((unsigned char *) + urb->transfer_buffer + sizeof(struct usb_ctrlrequest)); + + dbg("%s: signal x%x", __FUNCTION__, signals); + + old_dcd_state = portdata->dcd_state; + portdata->cts_state = 1; + portdata->dcd_state = ((signals & 0x01) ? 1 : 0); + portdata->dsr_state = ((signals & 0x02) ? 1 : 0); + portdata->ri_state = ((signals & 0x08) ? 1 : 0); + + if (port->tty && !C_CLOCAL(port->tty) + && old_dcd_state && !portdata->dcd_state) { + tty_hangup(port->tty); + } + } else + dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest); + } else + dbg("%s: error %d", __FUNCTION__, urb->status); + + /* Resubmit urb so we continue receiving IRQ data */ + if (urb->status != -ESHUTDOWN) { + urb->dev = serial->dev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err); + } +} + + +static int +option_write_room (struct usb_serial_port *port) +{ + struct option_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i=0; i < N_OUT_URB; i++) + this_urb = portdata->out_urbs[i]; + if (this_urb && this_urb->status != -EINPROGRESS) + data_len += OUT_BUFLEN; + + dbg("%s: %d", __FUNCTION__, data_len); + return data_len; +} + + +static int +option_chars_in_buffer (struct usb_serial_port *port) +{ + struct option_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i=0; i < N_OUT_URB; i++) + this_urb = portdata->out_urbs[i]; + if (this_urb && this_urb->status == -EINPROGRESS) + data_len += this_urb->transfer_buffer_length; + + dbg("%s: %d", __FUNCTION__, data_len); + return data_len; +} + + +static int +option_open (struct usb_serial_port *port, struct file *filp) +{ + struct option_port_private *portdata; + struct usb_serial *serial = port->serial; + int i, err; + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + dbg("%s", __FUNCTION__); + + /* Set some sane defaults */ + portdata->rts_state = 1; + portdata->dtr_state = 1; + + /* Reset low level data toggle and start reading from endpoints */ + for (i = 0; i < N_IN_URB; i++) { + urb = portdata->in_urbs[i]; + if (! urb) + continue; + if (urb->dev != serial->dev) { + dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev); + continue; + } + + /* make sure endpoint data toggle is synchronized with the device */ + + usb_clear_halt(urb->dev, urb->pipe); + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err, + urb->transfer_buffer_length); + } + } + + /* Reset low level data toggle on out endpoints */ + for (i = 0; i < N_OUT_URB; i++) { + urb = portdata->out_urbs[i]; + if (! urb) + continue; + urb->dev = serial->dev; + /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */ + } + + port->tty->low_latency = 1; + + option_send_setup(port); + + return (0); +} + +static inline void +stop_urb(struct urb *urb) +{ + if (urb && urb->status == -EINPROGRESS) { + urb->transfer_flags &= ~URB_ASYNC_UNLINK; + usb_kill_urb(urb); + } +} + +static void +option_close(struct usb_serial_port *port, struct file *filp) +{ + int i; + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + portdata = usb_get_serial_port_data(port); + + portdata->rts_state = 0; + portdata->dtr_state = 0; + + if (serial->dev) { + option_send_setup(port); + + /* Stop reading/writing urbs */ + for (i = 0; i < N_IN_URB; i++) + stop_urb(portdata->in_urbs[i]); + for (i = 0; i < N_OUT_URB; i++) + stop_urb(portdata->out_urbs[i]); + } + port->tty = NULL; +} + + +/* Helper functions used by option_setup_urbs */ +static struct urb * +option_setup_urb (struct usb_serial *serial, int endpoint, + int dir, void *ctx, char *buf, int len, + void (*callback)(struct urb *, struct pt_regs *regs)) +{ + struct urb *urb; + + if (endpoint == -1) + return NULL; /* endpoint not needed */ + + urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ + if (urb == NULL) { + dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint); + return NULL; + } + + /* Fill URB using supplied data. */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + + return urb; +} + +/* Setup urbs */ +static void +option_setup_urbs(struct usb_serial *serial) +{ + int j; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + port = serial->port[0]; + portdata = usb_get_serial_port_data(port); + + /* Do indat endpoints first */ + for (j = 0; j <= N_IN_URB; ++j) { + portdata->in_urbs[j] = option_setup_urb (serial, + port->bulk_in_endpointAddress, USB_DIR_IN, port, + portdata->in_buffer[j], IN_BUFLEN, option_indat_callback); + } + + /* outdat endpoints */ + for (j = 0; j <= N_OUT_URB; ++j) { + portdata->out_urbs[j] = option_setup_urb (serial, + port->bulk_out_endpointAddress, USB_DIR_OUT, port, + portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback); + } +} + + +static int +option_send_setup(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + portdata = usb_get_serial_port_data(port); + + if (port->tty) { + int val = 0; + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; + + return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT); + } + + return 0; +} + + +static int +option_startup (struct usb_serial *serial) +{ + int i, err; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + /* Now setup per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL); + if (!portdata) { + dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i); + return (1); + } + memset(portdata, 0, sizeof(struct option_port_private)); + + usb_set_serial_port_data(port, portdata); + + if (! port->interrupt_in_urb) + continue; + err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (err) + dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err); + } + + option_setup_urbs(serial); + + return (0); +} + +static void +option_shutdown (struct usb_serial *serial) +{ + int i, j; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + /* Stop reading/writing urbs */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + for (j = 0; j < N_IN_URB; j++) + stop_urb(portdata->in_urbs[j]); + for (j = 0; j < N_OUT_URB; j++) + stop_urb(portdata->out_urbs[j]); + } + + /* Now free them */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + + for (j = 0; j < N_IN_URB; j++) { + if (portdata->in_urbs[j]) { + usb_free_urb(portdata->in_urbs[j]); + portdata->in_urbs[j] = NULL; + } + } + for (j = 0; j < N_OUT_URB; j++) { + if (portdata->out_urbs[j]) { + usb_free_urb(portdata->out_urbs[j]); + portdata->out_urbs[j] = NULL; + } + } + } + + /* Now free per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + kfree(usb_get_serial_port_data(port)); + } +} + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug messages"); + diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4536f63faaea..5da76dd8fb28 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1297,13 +1297,6 @@ static int __init usb_serial_init(void) goto exit_bus; } - /* register the generic driver, if we should */ - result = usb_serial_generic_register(debug); - if (result < 0) { - err("%s - registering generic driver failed", __FUNCTION__); - goto exit_generic; - } - usb_serial_tty_driver->owner = THIS_MODULE; usb_serial_tty_driver->driver_name = "usbserial"; usb_serial_tty_driver->devfs_name = "usb/tts/"; @@ -1329,17 +1322,24 @@ static int __init usb_serial_init(void) goto exit_tty; } + /* register the generic driver, if we should */ + result = usb_serial_generic_register(debug); + if (result < 0) { + err("%s - registering generic driver failed", __FUNCTION__); + goto exit_generic; + } + info(DRIVER_DESC " " DRIVER_VERSION); return result; +exit_generic: + usb_deregister(&usb_serial_driver); + exit_tty: tty_unregister_driver(usb_serial_tty_driver); exit_reg_driver: - usb_serial_generic_deregister(); - -exit_generic: bus_unregister(&usb_serial_bus_type); exit_bus: diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c index d76483706bc9..5a9321705a74 100644 --- a/drivers/usb/storage/debug.c +++ b/drivers/usb/storage/debug.c @@ -47,6 +47,7 @@ #include <linux/cdrom.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> +#include <scsi/scsi_dbg.h> #include "debug.h" #include "scsi.h" diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 7eff03d9b041..f3b60288696c 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -786,7 +786,7 @@ static int usbat_flash_check_media(struct us_data *us, if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - // Check for media existance + // Check for media existence rc = usbat_flash_check_media_present(uio); if (rc == USBAT_FLASH_MEDIA_NONE) { info->sense_key = 0x02; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index bbda63c24c4d..9fcc7bd1fbe4 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1,5 +1,5 @@ /* Driver for USB Mass Storage compliant devices - * Ununsual Devices File + * Unusual Devices File * * $Id: unusual_devs.h,v 1.32 2002/02/25 02:41:24 mdharm Exp $ * @@ -48,6 +48,14 @@ * USB development list <linux-usb-devel@lists.sourceforge.net>. */ +/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr> + */ +UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, + "ATMEL", + "SND1 Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE), + UNUSUAL_DEV( 0x03ee, 0x6901, 0x0000, 0x0100, "Mitsumi", "USB FDD", @@ -854,6 +862,15 @@ UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), +/* Reported by Filippo Bardelli <filibard@libero.it> + * The device reports a subclass of RBC, which is wrong. + */ +UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100, + "Trumpion Microelectronics, Inc.", + "33520 USB Digital Voice Recorder", + US_SC_UFI, US_PR_DEVICE, NULL, + 0), + /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, "Trumpion", @@ -994,6 +1011,13 @@ UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init, 0 ), +/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */ +UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001, + "Minolta", + "Dimage Z10", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + /* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */ UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110, "SWISSBIT", |