diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/video/fbdev/Kconfig | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index b174af914e7a..6b2de93bd302 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -31,7 +31,7 @@ menuconfig FB in the /dev directory, i.e. /dev/fb*. You need an utility program called fbset to make full use of frame - buffer devices. Please read <file:Documentation/fb/framebuffer.txt> + buffer devices. Please read <file:Documentation/fb/framebuffer.rst> and the Framebuffer-HOWTO at <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more information. @@ -241,7 +241,7 @@ config FB_CIRRUS If you have a PCI-based system, this enables support for these chips: GD-543x, GD-544x, GD-5480. - Please read the file <file:Documentation/fb/cirrusfb.txt>. + Please read the file <file:Documentation/fb/cirrusfb.rst>. Say N unless you have such a graphics board or plan to get one before you next recompile the kernel. @@ -289,7 +289,7 @@ config FB_ARMCLCD If you want to compile this as a module (=code which can be inserted into and removed from the running kernel), say M - here and read <file:Documentation/kbuild/modules.txt>. The module + here and read <file:Documentation/kbuild/modules.rst>. The module will be called amba-clcd. config FB_ACORN @@ -615,7 +615,7 @@ config FB_UVESA This driver generally provides more features than vesafb but requires a userspace helper application called 'v86d'. See - <file:Documentation/fb/uvesafb.txt> for more information. + <file:Documentation/fb/uvesafb.rst> for more information. If unsure, say N. @@ -630,7 +630,7 @@ config FB_VESA This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. You will get a boot time penguin logo at no additional cost. Please - read <file:Documentation/fb/vesafb.txt>. If unsure, say Y. + read <file:Documentation/fb/vesafb.rst>. If unsure, say Y. config FB_EFI bool "EFI-based Framebuffer Support" @@ -828,7 +828,7 @@ config FB_PVR2 module load time. The parameters look like "video=pvr2:XXX", where the meaning of XXX can be found at the end of the main source file (<file:drivers/video/pvr2fb.c>). Please see the file - <file:Documentation/fb/pvr2fb.txt>. + <file:Documentation/fb/pvr2fb.rst>. config FB_OPENCORES tristate "OpenCores VGA/LCD core 2.0 framebuffer support" @@ -991,7 +991,7 @@ config FB_I810 module will be called i810fb. For more information, please read - <file:Documentation/fb/intel810.txt> + <file:Documentation/fb/intel810.rst> config FB_I810_GTF bool "use VESA Generalized Timing Formula" @@ -1061,7 +1061,7 @@ config FB_INTEL To compile this driver as a module, choose M here: the module will be called intelfb. - For more information, please read <file:Documentation/fb/intelfb.txt> + For more information, please read <file:Documentation/fb/intelfb.rst> config FB_INTEL_DEBUG bool "Intel driver Debug Messages" @@ -1098,7 +1098,7 @@ config FB_MATROX You can pass several parameters to the driver at boot time or at module load time. The parameters look like "video=matroxfb:XXX", and - are described in <file:Documentation/fb/matroxfb.txt>. + are described in <file:Documentation/fb/matroxfb.rst>. config FB_MATROX_MILLENIUM bool "Millennium I/II support" @@ -1249,7 +1249,7 @@ config FB_ATY128 help This driver supports graphics boards with the ATI Rage128 chips. Say Y if you have such a graphics board and read - <file:Documentation/fb/aty128fb.txt>. + <file:Documentation/fb/aty128fb.rst>. To compile this driver as a module, choose M here: the module will be called aty128fb. @@ -1511,7 +1511,7 @@ config FB_VOODOO1 WARNING: Do not use any application that uses the 3D engine (namely glide) while using this driver. - Please read the <file:Documentation/fb/sstfb.txt> for supported + Please read the <file:Documentation/fb/sstfb.rst> for supported options and other important info support. config FB_VT8623 @@ -1543,7 +1543,7 @@ config FB_TRIDENT There are also integrated versions of these chips called CyberXXXX, CyberImage or CyberBlade. These chips are mostly found in laptops but also on some motherboards including early VIA EPIA motherboards. - For more information, read <file:Documentation/fb/tridentfb.txt> + For more information, read <file:Documentation/fb/tridentfb.rst> Say Y if you have such a graphics board. @@ -1757,7 +1757,7 @@ config FB_PXA This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called pxafb. If you want to compile it as a module, - say M here and read <file:Documentation/kbuild/modules.txt>. + say M here and read <file:Documentation/kbuild/modules.rst>. If unsure, say N. @@ -1783,7 +1783,7 @@ config FB_PXA_PARAMETERS single model of flatpanel then you can safely leave this option disabled. - <file:Documentation/fb/pxafb.txt> describes the available parameters. + <file:Documentation/fb/pxafb.rst> describes the available parameters. config PXA3XX_GCU tristate "PXA3xx 2D graphics accelerator driver" @@ -1838,7 +1838,7 @@ config FB_W100 This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called w100fb. If you want to compile it as a module, - say M here and read <file:Documentation/kbuild/modules.txt>. + say M here and read <file:Documentation/kbuild/modules.rst>. If unsure, say N. @@ -1867,7 +1867,7 @@ config FB_TMIO This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called tmiofb. If you want to compile it as a module, - say M here and read <file:Documentation/kbuild/modules.txt>. + say M here and read <file:Documentation/kbuild/modules.rst>. If unsure, say N. @@ -1914,7 +1914,7 @@ config FB_S3C2410 This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called s3c2410fb. If you want to compile it as a module, - say M here and read <file:Documentation/kbuild/modules.txt>. + say M here and read <file:Documentation/kbuild/modules.rst>. If unsure, say N. config FB_S3C2410_DEBUG @@ -1951,7 +1951,7 @@ config FB_SM501 This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called sm501fb. If you want to compile it as a module, - say M here and read <file:Documentation/kbuild/modules.txt>. + say M here and read <file:Documentation/kbuild/modules.rst>. If unsure, say N. @@ -2284,7 +2284,7 @@ config FB_SM712 This driver is also available as a module. The module will be called sm712fb. If you want to compile it as a module, say M - here and read <file:Documentation/kbuild/modules.txt>. + here and read <file:Documentation/kbuild/modules.rst>. source "drivers/video/fbdev/omap/Kconfig" source "drivers/video/fbdev/omap2/Kconfig" |