diff options
Diffstat (limited to 'drivers/w1/slaves')
| -rw-r--r-- | drivers/w1/slaves/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/w1/slaves/Makefile | 2 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_bq27000.c | 117 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2438.c | 9 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2805.c | 313 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_therm.c | 164 |
6 files changed, 462 insertions, 157 deletions
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index fb68465908f2..3c945f9f5f0f 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -65,6 +65,14 @@ config W1_SLAVE_DS2423 Say Y here if you want to use a 1-wire counter family device (DS2423). +config W1_SLAVE_DS2805 + tristate "112-byte EEPROM support (DS28E05)" + help + Say Y here if you want to use a 1-wire + is a 112-byte user-programmable EEPROM is + organized as 7 pages of 16 bytes each with 64bit + unique number. Requires OverDrive Speed to talk to. + config W1_SLAVE_DS2431 tristate "1kb EEPROM family support (DS2431)" help @@ -140,10 +148,4 @@ config W1_SLAVE_DS28E04 If you are unsure, say N. -config W1_SLAVE_BQ27000 - tristate "BQ27000 slave support" - help - Say Y here if you want to use a hdq - bq27000 slave support. - endmenu diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index 54c63e420302..36b22fb2d3a1 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -10,10 +10,10 @@ obj-$(CONFIG_W1_SLAVE_DS2413) += w1_ds2413.o obj-$(CONFIG_W1_SLAVE_DS2406) += w1_ds2406.o obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o +obj-$(CONFIG_W1_SLAVE_DS2805) += w1_ds2805.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o -obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c deleted file mode 100644 index 8046ac45381a..000000000000 --- a/drivers/w1/slaves/w1_bq27000.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * drivers/w1/slaves/w1_bq27000.c - * - * Copyright (C) 2007 Texas Instruments, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/types.h> -#include <linux/platform_device.h> -#include <linux/mutex.h> -#include <linux/power/bq27xxx_battery.h> - -#include <linux/w1.h> - -#define W1_FAMILY_BQ27000 0x01 - -#define HDQ_CMD_READ (0) -#define HDQ_CMD_WRITE (1<<7) - -static int F_ID; -module_param(F_ID, int, S_IRUSR); -MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device"); - -static int w1_bq27000_read(struct device *dev, unsigned int reg) -{ - u8 val; - struct w1_slave *sl = container_of(dev->parent, struct w1_slave, dev); - - mutex_lock(&sl->master->bus_mutex); - w1_write_8(sl->master, HDQ_CMD_READ | reg); - val = w1_read_8(sl->master); - mutex_unlock(&sl->master->bus_mutex); - - return val; -} - -static struct bq27xxx_platform_data bq27000_battery_info = { - .read = w1_bq27000_read, - .name = "bq27000-battery", - .chip = BQ27000, -}; - -static int w1_bq27000_add_slave(struct w1_slave *sl) -{ - int ret; - struct platform_device *pdev; - - pdev = platform_device_alloc("bq27000-battery", -1); - if (!pdev) { - ret = -ENOMEM; - return ret; - } - ret = platform_device_add_data(pdev, - &bq27000_battery_info, - sizeof(bq27000_battery_info)); - if (ret) - goto pdev_add_failed; - pdev->dev.parent = &sl->dev; - - ret = platform_device_add(pdev); - if (ret) - goto pdev_add_failed; - - dev_set_drvdata(&sl->dev, pdev); - - goto success; - -pdev_add_failed: - platform_device_put(pdev); -success: - return ret; -} - -static void w1_bq27000_remove_slave(struct w1_slave *sl) -{ - struct platform_device *pdev = dev_get_drvdata(&sl->dev); - - platform_device_unregister(pdev); -} - -static struct w1_family_ops w1_bq27000_fops = { - .add_slave = w1_bq27000_add_slave, - .remove_slave = w1_bq27000_remove_slave, -}; - -static struct w1_family w1_bq27000_family = { - .fid = W1_FAMILY_BQ27000, - .fops = &w1_bq27000_fops, -}; - -static int __init w1_bq27000_init(void) -{ - if (F_ID) - w1_bq27000_family.fid = F_ID; - - return w1_register_family(&w1_bq27000_family); -} - -static void __exit w1_bq27000_exit(void) -{ - w1_unregister_family(&w1_bq27000_family); -} - -module_init(w1_bq27000_init); -module_exit(w1_bq27000_exit); - -MODULE_AUTHOR("Texas Instruments Ltd"); -MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_BQ27000)); diff --git a/drivers/w1/slaves/w1_ds2438.c b/drivers/w1/slaves/w1_ds2438.c index 6487fb772a20..bf641a191d07 100644 --- a/drivers/w1/slaves/w1_ds2438.c +++ b/drivers/w1/slaves/w1_ds2438.c @@ -51,7 +51,7 @@ #define DS2438_CURRENT_MSB 0x06 #define DS2438_THRESHOLD 0x07 -int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf) +static int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf) { unsigned int retries = W1_DS2438_RETRIES; u8 w1_buf[2]; @@ -85,7 +85,7 @@ int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf) return -1; } -int w1_ds2438_get_temperature(struct w1_slave *sl, int16_t *temperature) +static int w1_ds2438_get_temperature(struct w1_slave *sl, int16_t *temperature) { unsigned int retries = W1_DS2438_RETRIES; u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; @@ -127,7 +127,7 @@ post_unlock: return ret; } -int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value) +static int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value) { unsigned int retries = W1_DS2438_RETRIES; u8 w1_buf[3]; @@ -186,7 +186,8 @@ int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value) return -1; } -uint16_t w1_ds2438_get_voltage(struct w1_slave *sl, int adc_input, uint16_t *voltage) +static uint16_t w1_ds2438_get_voltage(struct w1_slave *sl, + int adc_input, uint16_t *voltage) { unsigned int retries = W1_DS2438_RETRIES; u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; diff --git a/drivers/w1/slaves/w1_ds2805.c b/drivers/w1/slaves/w1_ds2805.c new file mode 100644 index 000000000000..29348d283a65 --- /dev/null +++ b/drivers/w1/slaves/w1_ds2805.c @@ -0,0 +1,313 @@ +/* + * w1_ds2805 - w1 family 0d (DS28E05) driver + * + * Copyright (c) 2016 Andrew Worsley amworsley@gmail.com + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/types.h> +#include <linux/delay.h> + +#include <linux/w1.h> + +#define W1_EEPROM_DS2805 0x0D + +#define W1_F0D_EEPROM_SIZE 128 +#define W1_F0D_PAGE_BITS 3 +#define W1_F0D_PAGE_SIZE (1<<W1_F0D_PAGE_BITS) +#define W1_F0D_PAGE_MASK 0x0F + +#define W1_F0D_SCRATCH_BITS 1 +#define W1_F0D_SCRATCH_SIZE (1<<W1_F0D_SCRATCH_BITS) +#define W1_F0D_SCRATCH_MASK (W1_F0D_SCRATCH_SIZE-1) + +#define W1_F0D_READ_EEPROM 0xF0 +#define W1_F0D_WRITE_EEPROM 0x55 +#define W1_F0D_RELEASE 0xFF + +#define W1_F0D_CS_OK 0xAA /* Chip Status Ok */ + +#define W1_F0D_TPROG_MS 16 + +#define W1_F0D_READ_RETRIES 10 +#define W1_F0D_READ_MAXLEN W1_F0D_EEPROM_SIZE + +/* + * Check the file size bounds and adjusts count as needed. + * This would not be needed if the file size didn't reset to 0 after a write. + */ +static inline size_t w1_f0d_fix_count(loff_t off, size_t count, size_t size) +{ + if (off > size) + return 0; + + if ((off + count) > size) + return size - off; + + return count; +} + +/* + * Read a block from W1 ROM two times and compares the results. + * If they are equal they are returned, otherwise the read + * is repeated W1_F0D_READ_RETRIES times. + * + * count must not exceed W1_F0D_READ_MAXLEN. + */ +static int w1_f0d_readblock(struct w1_slave *sl, int off, int count, char *buf) +{ + u8 wrbuf[3]; + u8 cmp[W1_F0D_READ_MAXLEN]; + int tries = W1_F0D_READ_RETRIES; + + do { + wrbuf[0] = W1_F0D_READ_EEPROM; + wrbuf[1] = off & 0x7f; + wrbuf[2] = 0; + + if (w1_reset_select_slave(sl)) + return -1; + + w1_write_block(sl->master, wrbuf, sizeof(wrbuf)); + w1_read_block(sl->master, buf, count); + + if (w1_reset_select_slave(sl)) + return -1; + + w1_write_block(sl->master, wrbuf, sizeof(wrbuf)); + w1_read_block(sl->master, cmp, count); + + if (!memcmp(cmp, buf, count)) + return 0; + } while (--tries); + + dev_err(&sl->dev, "proof reading failed %d times\n", + W1_F0D_READ_RETRIES); + + return -1; +} + +static ssize_t w1_f0d_read_bin(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int todo = count; + + count = w1_f0d_fix_count(off, count, W1_F0D_EEPROM_SIZE); + if (count == 0) + return 0; + + mutex_lock(&sl->master->mutex); + + /* read directly from the EEPROM in chunks of W1_F0D_READ_MAXLEN */ + while (todo > 0) { + int block_read; + + if (todo >= W1_F0D_READ_MAXLEN) + block_read = W1_F0D_READ_MAXLEN; + else + block_read = todo; + + if (w1_f0d_readblock(sl, off, block_read, buf) < 0) { + count = -EIO; + break; + } + + todo -= W1_F0D_READ_MAXLEN; + buf += W1_F0D_READ_MAXLEN; + off += W1_F0D_READ_MAXLEN; + } + + mutex_unlock(&sl->master->mutex); + + return count; +} + +/* + * Writes to the scratchpad and reads it back for verification. + * Then copies the scratchpad to EEPROM. + * The data must be aligned at W1_F0D_SCRATCH_SIZE bytes and + * must be W1_F0D_SCRATCH_SIZE bytes long. + * The master must be locked. + * + * @param sl The slave structure + * @param addr Address for the write + * @param len length must be <= (W1_F0D_PAGE_SIZE - (addr & W1_F0D_PAGE_MASK)) + * @param data The data to write + * @return 0=Success -1=failure + */ +static int w1_f0d_write(struct w1_slave *sl, int addr, int len, const u8 *data) +{ + int tries = W1_F0D_READ_RETRIES; + u8 wrbuf[3]; + u8 rdbuf[W1_F0D_SCRATCH_SIZE]; + u8 cs; + + if ((addr & 1) || (len != 2)) { + dev_err(&sl->dev, "%s: bad addr/len - addr=%#x len=%d\n", + __func__, addr, len); + return -1; + } + +retry: + + /* Write the data to the scratchpad */ + if (w1_reset_select_slave(sl)) + return -1; + + wrbuf[0] = W1_F0D_WRITE_EEPROM; + wrbuf[1] = addr & 0xff; + wrbuf[2] = 0xff; /* ?? from Example */ + + w1_write_block(sl->master, wrbuf, sizeof(wrbuf)); + w1_write_block(sl->master, data, len); + + w1_read_block(sl->master, rdbuf, sizeof(rdbuf)); + /* Compare what was read against the data written */ + if ((rdbuf[0] != data[0]) || (rdbuf[1] != data[1])) { + + if (--tries) + goto retry; + + dev_err(&sl->dev, + "could not write to eeprom, scratchpad compare failed %d times\n", + W1_F0D_READ_RETRIES); + pr_info("%s: rdbuf = %#x %#x data = %#x %#x\n", + __func__, rdbuf[0], rdbuf[1], data[0], data[1]); + + return -1; + } + + /* Trigger write out to EEPROM */ + w1_write_8(sl->master, W1_F0D_RELEASE); + + /* Sleep for tprog ms to wait for the write to complete */ + msleep(W1_F0D_TPROG_MS); + + /* Check CS (Command Status) == 0xAA ? */ + cs = w1_read_8(sl->master); + if (cs != W1_F0D_CS_OK) { + dev_err(&sl->dev, "save to eeprom failed = CS=%#x\n", cs); + return -1; + } + + return 0; +} + +static ssize_t w1_f0d_write_bin(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct w1_slave *sl = kobj_to_w1_slave(kobj); + int addr, len; + int copy; + + count = w1_f0d_fix_count(off, count, W1_F0D_EEPROM_SIZE); + if (count == 0) + return 0; + + mutex_lock(&sl->master->mutex); + + /* Can only write data in blocks of the size of the scratchpad */ + addr = off; + len = count; + while (len > 0) { + + /* if len too short or addr not aligned */ + if (len < W1_F0D_SCRATCH_SIZE || addr & W1_F0D_SCRATCH_MASK) { + char tmp[W1_F0D_SCRATCH_SIZE]; + + /* read the block and update the parts to be written */ + if (w1_f0d_readblock(sl, addr & ~W1_F0D_SCRATCH_MASK, + W1_F0D_SCRATCH_SIZE, tmp)) { + count = -EIO; + goto out_up; + } + + /* copy at most to the boundary of the PAGE or len */ + copy = W1_F0D_SCRATCH_SIZE - + (addr & W1_F0D_SCRATCH_MASK); + + if (copy > len) + copy = len; + + memcpy(&tmp[addr & W1_F0D_SCRATCH_MASK], buf, copy); + if (w1_f0d_write(sl, addr & ~W1_F0D_SCRATCH_MASK, + W1_F0D_SCRATCH_SIZE, tmp) < 0) { + count = -EIO; + goto out_up; + } + } else { + + copy = W1_F0D_SCRATCH_SIZE; + if (w1_f0d_write(sl, addr, copy, buf) < 0) { + count = -EIO; + goto out_up; + } + } + buf += copy; + addr += copy; + len -= copy; + } + +out_up: + mutex_unlock(&sl->master->mutex); + + return count; +} + +static struct bin_attribute w1_f0d_bin_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO | S_IWUSR, + }, + .size = W1_F0D_EEPROM_SIZE, + .read = w1_f0d_read_bin, + .write = w1_f0d_write_bin, +}; + +static int w1_f0d_add_slave(struct w1_slave *sl) +{ + return sysfs_create_bin_file(&sl->dev.kobj, &w1_f0d_bin_attr); +} + +static void w1_f0d_remove_slave(struct w1_slave *sl) +{ + sysfs_remove_bin_file(&sl->dev.kobj, &w1_f0d_bin_attr); +} + +static struct w1_family_ops w1_f0d_fops = { + .add_slave = w1_f0d_add_slave, + .remove_slave = w1_f0d_remove_slave, +}; + +static struct w1_family w1_family_2d = { + .fid = W1_EEPROM_DS2805, + .fops = &w1_f0d_fops, +}; + +static int __init w1_f0d_init(void) +{ + pr_info("%s()\n", __func__); + return w1_register_family(&w1_family_2d); +} + +static void __exit w1_f0d_fini(void) +{ + pr_info("%s()\n", __func__); + w1_unregister_family(&w1_family_2d); +} + +module_init(w1_f0d_init); +module_exit(w1_f0d_fini); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andrew Worsley amworsley@gmail.com"); +MODULE_DESCRIPTION("w1 family 0d driver for DS2805, 1kb EEPROM"); diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index cb3fc3c6b0d1..259525c3382a 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -29,6 +29,7 @@ #include <linux/types.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/hwmon.h> #include <linux/w1.h> @@ -59,6 +60,12 @@ struct w1_therm_family_data { atomic_t refcnt; }; +struct therm_info { + u8 rom[9]; + u8 crc; + u8 verdict; +}; + /* return the address of the refcnt in the family data */ #define THERM_REFCNT(family_data) \ (&((struct w1_therm_family_data *)family_data)->refcnt) @@ -107,19 +114,72 @@ static struct attribute *w1_ds28ea00_attrs[] = { &dev_attr_w1_seq.attr, NULL, }; + ATTRIBUTE_GROUPS(w1_therm); ATTRIBUTE_GROUPS(w1_ds28ea00); +#if IS_REACHABLE(CONFIG_HWMON) +static int w1_read_temp(struct device *dev, u32 attr, int channel, + long *val); + +static umode_t w1_is_visible(const void *_data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + return attr == hwmon_temp_input ? 0444 : 0; +} + +static int w1_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + switch (type) { + case hwmon_temp: + return w1_read_temp(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static const u32 w1_temp_config[] = { + HWMON_T_INPUT, + 0 +}; + +static const struct hwmon_channel_info w1_temp = { + .type = hwmon_temp, + .config = w1_temp_config, +}; + +static const struct hwmon_channel_info *w1_info[] = { + &w1_temp, + NULL +}; + +static const struct hwmon_ops w1_hwmon_ops = { + .is_visible = w1_is_visible, + .read = w1_read, +}; + +static const struct hwmon_chip_info w1_chip_info = { + .ops = &w1_hwmon_ops, + .info = w1_info, +}; +#define W1_CHIPINFO (&w1_chip_info) +#else +#define W1_CHIPINFO NULL +#endif + static struct w1_family_ops w1_therm_fops = { .add_slave = w1_therm_add_slave, .remove_slave = w1_therm_remove_slave, .groups = w1_therm_groups, + .chip_info = W1_CHIPINFO, }; static struct w1_family_ops w1_ds28ea00_fops = { .add_slave = w1_therm_add_slave, .remove_slave = w1_therm_remove_slave, .groups = w1_ds28ea00_groups, + .chip_info = W1_CHIPINFO, }; static struct w1_family w1_therm_family_DS18S20 = { @@ -422,33 +482,31 @@ static ssize_t w1_slave_store(struct device *device, return ret ? : size; } -static ssize_t w1_slave_show(struct device *device, - struct device_attribute *attr, char *buf) +static ssize_t read_therm(struct device *device, + struct w1_slave *sl, struct therm_info *info) { - struct w1_slave *sl = dev_to_w1_slave(device); struct w1_master *dev = sl->master; - u8 rom[9], crc, verdict, external_power; - int i, ret, max_trying = 10; - ssize_t c = PAGE_SIZE; + u8 external_power; + int ret, max_trying = 10; u8 *family_data = sl->family_data; ret = mutex_lock_interruptible(&dev->bus_mutex); if (ret != 0) - goto post_unlock; + goto error; - if (!sl->family_data) { + if (!family_data) { ret = -ENODEV; - goto pre_unlock; + goto mt_unlock; } /* prevent the slave from going away in sleep */ atomic_inc(THERM_REFCNT(family_data)); - memset(rom, 0, sizeof(rom)); + memset(info->rom, 0, sizeof(info->rom)); while (max_trying--) { - verdict = 0; - crc = 0; + info->verdict = 0; + info->crc = 0; if (!w1_reset_select_slave(sl)) { int count = 0; @@ -474,47 +532,69 @@ static ssize_t w1_slave_show(struct device *device, sleep_rem = msleep_interruptible(tm); if (sleep_rem != 0) { ret = -EINTR; - goto post_unlock; + goto dec_refcnt; } ret = mutex_lock_interruptible(&dev->bus_mutex); if (ret != 0) - goto post_unlock; + goto dec_refcnt; } else if (!w1_strong_pullup) { sleep_rem = msleep_interruptible(tm); if (sleep_rem != 0) { ret = -EINTR; - goto pre_unlock; + goto dec_refcnt; } } if (!w1_reset_select_slave(sl)) { w1_write_8(dev, W1_READ_SCRATCHPAD); - count = w1_read_block(dev, rom, 9); + count = w1_read_block(dev, info->rom, 9); if (count != 9) { dev_warn(device, "w1_read_block() " "returned %u instead of 9.\n", count); } - crc = w1_calc_crc8(rom, 8); + info->crc = w1_calc_crc8(info->rom, 8); - if (rom[8] == crc) - verdict = 1; + if (info->rom[8] == info->crc) + info->verdict = 1; } } - if (verdict) + if (info->verdict) break; } +dec_refcnt: + atomic_dec(THERM_REFCNT(family_data)); +mt_unlock: + mutex_unlock(&dev->bus_mutex); +error: + return ret; +} + +static ssize_t w1_slave_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct w1_slave *sl = dev_to_w1_slave(device); + struct therm_info info; + u8 *family_data = sl->family_data; + int ret, i; + ssize_t c = PAGE_SIZE; + u8 fid = sl->family->fid; + + ret = read_therm(device, sl, &info); + if (ret) + return ret; + for (i = 0; i < 9; ++i) - c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ", rom[i]); + c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ", info.rom[i]); c -= snprintf(buf + PAGE_SIZE - c, c, ": crc=%02x %s\n", - crc, (verdict) ? "YES" : "NO"); - if (verdict) - memcpy(family_data, rom, sizeof(rom)); + info.crc, (info.verdict) ? "YES" : "NO"); + if (info.verdict) + memcpy(family_data, info.rom, sizeof(info.rom)); else dev_warn(device, "Read failed CRC check\n"); @@ -523,16 +603,42 @@ static ssize_t w1_slave_show(struct device *device, ((u8 *)family_data)[i]); c -= snprintf(buf + PAGE_SIZE - c, c, "t=%d\n", - w1_convert_temp(rom, sl->family->fid)); + w1_convert_temp(info.rom, fid)); ret = PAGE_SIZE - c; + return ret; +} -pre_unlock: - mutex_unlock(&dev->bus_mutex); +#if IS_REACHABLE(CONFIG_HWMON) +static int w1_read_temp(struct device *device, u32 attr, int channel, + long *val) +{ + struct w1_slave *sl = dev_get_drvdata(device); + struct therm_info info; + u8 fid = sl->family->fid; + int ret; + + switch (attr) { + case hwmon_temp_input: + ret = read_therm(device, sl, &info); + if (ret) + return ret; + + if (!info.verdict) { + ret = -EIO; + return ret; + } + + *val = w1_convert_temp(info.rom, fid); + ret = 0; + break; + default: + ret = -EOPNOTSUPP; + break; + } -post_unlock: - atomic_dec(THERM_REFCNT(family_data)); return ret; } +#endif #define W1_42_CHAIN 0x99 #define W1_42_CHAIN_OFF 0x3C |