diff options
Diffstat (limited to 'drivers')
61 files changed, 1013 insertions, 539 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 3278a210c435..22327e6a7236 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -162,12 +162,6 @@ config ACPI_DOCK This driver supports ACPI-controlled docking stations and removable drive bays such as the IBM Ultrabay and the Dell Module Bay. -config ACPI_I2C - def_tristate I2C - depends on I2C - help - ACPI I2C enumeration support. - config ACPI_PROCESSOR tristate "Processor" select THERMAL diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 81dbeb83bb45..cdaf68b58b00 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -73,7 +73,6 @@ obj-$(CONFIG_ACPI_HED) += hed.o obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o obj-$(CONFIG_ACPI_BGRT) += bgrt.o -obj-$(CONFIG_ACPI_I2C) += acpi_i2c.o # processor has its own "processor." module_param namespace processor-y := processor_driver.o processor_throttling.o diff --git a/drivers/acpi/acpi_i2c.c b/drivers/acpi/acpi_i2c.c deleted file mode 100644 index a82c7626aa9b..000000000000 --- a/drivers/acpi/acpi_i2c.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * ACPI I2C enumeration support - * - * Copyright (C) 2012, Intel Corporation - * Author: Mika Westerberg <mika.westerberg@linux.intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/acpi.h> -#include <linux/device.h> -#include <linux/export.h> -#include <linux/i2c.h> -#include <linux/ioport.h> - -ACPI_MODULE_NAME("i2c"); - -static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data) -{ - struct i2c_board_info *info = data; - - if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { - struct acpi_resource_i2c_serialbus *sb; - - sb = &ares->data.i2c_serial_bus; - if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) { - info->addr = sb->slave_address; - if (sb->access_mode == ACPI_I2C_10BIT_MODE) - info->flags |= I2C_CLIENT_TEN; - } - } else if (info->irq < 0) { - struct resource r; - - if (acpi_dev_resource_interrupt(ares, 0, &r)) - info->irq = r.start; - } - - /* Tell the ACPI core to skip this resource */ - return 1; -} - -static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, - void *data, void **return_value) -{ - struct i2c_adapter *adapter = data; - struct list_head resource_list; - struct i2c_board_info info; - struct acpi_device *adev; - int ret; - - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - if (acpi_bus_get_status(adev) || !adev->status.present) - return AE_OK; - - memset(&info, 0, sizeof(info)); - info.acpi_node.handle = handle; - info.irq = -1; - - INIT_LIST_HEAD(&resource_list); - ret = acpi_dev_get_resources(adev, &resource_list, - acpi_i2c_add_resource, &info); - acpi_dev_free_resource_list(&resource_list); - - if (ret < 0 || !info.addr) - return AE_OK; - - strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type)); - if (!i2c_new_device(adapter, &info)) { - dev_err(&adapter->dev, - "failed to add I2C device %s from ACPI\n", - dev_name(&adev->dev)); - } - - return AE_OK; -} - -/** - * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter - * @adapter: pointer to adapter - * - * Enumerate all I2C slave devices behind this adapter by walking the ACPI - * namespace. When a device is found it will be added to the Linux device - * model and bound to the corresponding ACPI handle. - */ -void acpi_i2c_register_devices(struct i2c_adapter *adapter) -{ - acpi_handle handle; - acpi_status status; - - handle = ACPI_HANDLE(adapter->dev.parent); - if (!handle) - return; - - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, - acpi_i2c_add_device, NULL, - adapter, NULL); - if (ACPI_FAILURE(status)) - dev_warn(&adapter->dev, "failed to enumerate I2C slaves\n"); -} -EXPORT_SYMBOL_GPL(acpi_i2c_register_devices); diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c index dfffaf014022..a19f657dfa59 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_slave.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c @@ -16,7 +16,6 @@ */ #include <linux/i2c.h> -#include <linux/of_i2c.h> #include <linux/pinctrl/pinmux.h> #include <linux/pinctrl/consumer.h> #include <drm/drm_encoder_slave.h> diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c index 925c7cddeff9..c38b56b268ac 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c @@ -16,7 +16,6 @@ */ #include <linux/i2c.h> -#include <linux/of_i2c.h> #include <linux/gpio.h> #include <linux/of_gpio.h> #include <linux/pinctrl/pinmux.h> diff --git a/drivers/gpu/host1x/drm/output.c b/drivers/gpu/host1x/drm/output.c index 8140fc6c34d8..137ae81ab80e 100644 --- a/drivers/gpu/host1x/drm/output.c +++ b/drivers/gpu/host1x/drm/output.c @@ -9,7 +9,7 @@ #include <linux/module.h> #include <linux/of_gpio.h> -#include <linux/of_i2c.h> +#include <linux/i2c.h> #include "drm.h" diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index dc6dea614abd..fcdd321f709e 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -385,7 +385,7 @@ config I2C_CPM config I2C_DAVINCI tristate "DaVinci I2C driver" - depends on ARCH_DAVINCI + depends on ARCH_DAVINCI || ARCH_KEYSTONE help Support for TI DaVinci I2C controller driver. diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 6bb839b688be..fd059308affa 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -28,7 +28,6 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_i2c.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/platform_data/dma-atmel.h> @@ -775,8 +774,6 @@ static int at91_twi_probe(struct platform_device *pdev) return rc; } - of_i2c_register_devices(&dev->adapter); - dev_info(dev->dev, "AT91 i2c bus driver.\n"); return 0; } diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 13ea1c29873d..35a473ba3d81 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -582,6 +582,7 @@ static struct i2c_algorithm bfin_twi_algorithm = { .functionality = bfin_twi_functionality, }; +#ifdef CONFIG_PM_SLEEP static int i2c_bfin_twi_suspend(struct device *dev) { struct bfin_twi_iface *iface = dev_get_drvdata(dev); @@ -619,6 +620,10 @@ static int i2c_bfin_twi_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm, i2c_bfin_twi_suspend, i2c_bfin_twi_resume); +#define I2C_BFIN_TWI_PM_OPS (&i2c_bfin_twi_pm) +#else +#define I2C_BFIN_TWI_PM_OPS NULL +#endif static int i2c_bfin_twi_probe(struct platform_device *pdev) { @@ -669,8 +674,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) p_adap->timeout = 5 * HZ; p_adap->retries = 3; - rc = peripheral_request_list((unsigned short *)pdev->dev.platform_data, - "i2c-bfin-twi"); + rc = peripheral_request_list( + (unsigned short *)dev_get_platdata(&pdev->dev), + "i2c-bfin-twi"); if (rc) { dev_err(&pdev->dev, "Can't setup pin mux!\n"); goto out_error_pin_mux; @@ -717,7 +723,7 @@ out_error_add_adapter: free_irq(iface->irq, iface); out_error_req_irq: out_error_no_irq: - peripheral_free_list((unsigned short *)pdev->dev.platform_data); + peripheral_free_list((unsigned short *)dev_get_platdata(&pdev->dev)); out_error_pin_mux: iounmap(iface->regs_base); out_error_ioremap: @@ -733,7 +739,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev) i2c_del_adapter(&(iface->adap)); free_irq(iface->irq, iface); - peripheral_free_list((unsigned short *)pdev->dev.platform_data); + peripheral_free_list((unsigned short *)dev_get_platdata(&pdev->dev)); iounmap(iface->regs_base); kfree(iface); @@ -746,7 +752,7 @@ static struct platform_driver i2c_bfin_twi_driver = { .driver = { .name = "i2c-bfin-twi", .owner = THIS_MODULE, - .pm = &i2c_bfin_twi_pm, + .pm = I2C_BFIN_TWI_PM_OPS, }, }; diff --git a/drivers/i2c/busses/i2c-cbus-gpio.c b/drivers/i2c/busses/i2c-cbus-gpio.c index 1be13ac11dc5..2d46f13adfdf 100644 --- a/drivers/i2c/busses/i2c-cbus-gpio.c +++ b/drivers/i2c/busses/i2c-cbus-gpio.c @@ -233,8 +233,9 @@ static int cbus_i2c_probe(struct platform_device *pdev) chost->clk_gpio = of_get_gpio(dnode, 0); chost->dat_gpio = of_get_gpio(dnode, 1); chost->sel_gpio = of_get_gpio(dnode, 2); - } else if (pdev->dev.platform_data) { - struct i2c_cbus_platform_data *pdata = pdev->dev.platform_data; + } else if (dev_get_platdata(&pdev->dev)) { + struct i2c_cbus_platform_data *pdata = + dev_get_platdata(&pdev->dev); chost->clk_gpio = pdata->clk_gpio; chost->dat_gpio = pdata->dat_gpio; chost->sel_gpio = pdata->sel_gpio; diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 2e1f7eb55bf4..b2b8aa9adc0e 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -42,7 +42,6 @@ #include <linux/dma-mapping.h> #include <linux/of_device.h> #include <linux/of_platform.h> -#include <linux/of_i2c.h> #include <sysdev/fsl_soc.h> #include <asm/cpm.h> @@ -681,11 +680,6 @@ static int cpm_i2c_probe(struct platform_device *ofdev) dev_dbg(&ofdev->dev, "hw routines for %s registered.\n", cpm->adap.name); - /* - * register OF I2C devices - */ - of_i2c_register_devices(&cpm->adap); - return 0; out_shut: cpm_i2c_shutdown(cpm); diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index fa556057d224..57473415be10 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -38,10 +38,7 @@ #include <linux/slab.h> #include <linux/cpufreq.h> #include <linux/gpio.h> -#include <linux/of_i2c.h> #include <linux/of_device.h> - -#include <mach/hardware.h> #include <linux/platform_data/i2c-davinci.h> /* ----- global defines ----------------------------------------------- */ @@ -665,7 +662,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) #endif dev->dev = &pdev->dev; dev->irq = irq->start; - dev->pdata = dev->dev->platform_data; + dev->pdata = dev_get_platdata(&dev->dev); platform_set_drvdata(pdev, dev); if (!dev->pdata && pdev->dev.of_node) { @@ -728,7 +725,6 @@ static int davinci_i2c_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failure adding adapter\n"); goto err_unuse_clocks; } - of_i2c_register_devices(adap); return 0; diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index ad46616de29e..dbecf08399f8 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -317,6 +317,12 @@ int i2c_dw_init(struct dw_i2c_dev *dev) 47, /* tLOW = 4.7 us */ 3, /* tf = 0.3 us */ 0); /* No offset */ + + /* Allow platforms to specify the ideal HCNT and LCNT values */ + if (dev->ss_hcnt && dev->ss_lcnt) { + hcnt = dev->ss_hcnt; + lcnt = dev->ss_lcnt; + } dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT); dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT); dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); @@ -331,6 +337,11 @@ int i2c_dw_init(struct dw_i2c_dev *dev) 13, /* tLOW = 1.3 us */ 3, /* tf = 0.3 us */ 0); /* No offset */ + + if (dev->fs_hcnt && dev->fs_lcnt) { + hcnt = dev->fs_hcnt; + lcnt = dev->fs_lcnt; + } dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT); dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT); dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); @@ -416,6 +427,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) u32 addr = msgs[dev->msg_write_idx].addr; u32 buf_len = dev->tx_buf_len; u8 *buf = dev->tx_buf; + bool need_restart = false; intr_mask = DW_IC_INTR_DEFAULT_MASK; @@ -443,6 +455,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) /* new i2c_msg */ buf = msgs[dev->msg_write_idx].buf; buf_len = msgs[dev->msg_write_idx].len; + + /* If both IC_EMPTYFIFO_HOLD_MASTER_EN and + * IC_RESTART_EN are set, we must manually + * set restart bit between messages. + */ + if ((dev->master_cfg & DW_IC_CON_RESTART_EN) && + (dev->msg_write_idx > 0)) + need_restart = true; } tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR); @@ -461,6 +481,11 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) buf_len == 1) cmd |= BIT(9); + if (need_restart) { + cmd |= BIT(10); + need_restart = false; + } + if (msgs[dev->msg_write_idx].flags & I2C_M_RD) { /* avoid rx buffer overrun */ diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 912aa2262866..e8a756537ed0 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -61,6 +61,14 @@ * @tx_fifo_depth: depth of the hardware tx fifo * @rx_fifo_depth: depth of the hardware rx fifo * @rx_outstanding: current master-rx elements in tx fifo + * @ss_hcnt: standard speed HCNT value + * @ss_lcnt: standard speed LCNT value + * @fs_hcnt: fast speed HCNT value + * @fs_lcnt: fast speed LCNT value + * + * HCNT and LCNT parameters can be used if the platform knows more accurate + * values than the one computed based only on the input clock frequency. + * Leave them to be %0 if not used. */ struct dw_i2c_dev { struct device *dev; @@ -91,6 +99,10 @@ struct dw_i2c_dev { unsigned int rx_fifo_depth; int rx_outstanding; u32 sda_hold_time; + u16 ss_hcnt; + u16 ss_lcnt; + u16 fs_hcnt; + u16 fs_lcnt; }; #define ACCESS_SWAP 0x00000001 diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 4c5fadabe49d..4c1b60539a25 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -35,7 +35,6 @@ #include <linux/err.h> #include <linux/interrupt.h> #include <linux/of.h> -#include <linux/of_i2c.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_runtime.h> @@ -54,9 +53,33 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev) } #ifdef CONFIG_ACPI +static void dw_i2c_acpi_params(struct platform_device *pdev, char method[], + u16 *hcnt, u16 *lcnt, u32 *sda_hold) +{ + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER }; + acpi_handle handle = ACPI_HANDLE(&pdev->dev); + union acpi_object *obj; + + if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf))) + return; + + obj = (union acpi_object *)buf.pointer; + if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) { + const union acpi_object *objs = obj->package.elements; + + *hcnt = (u16)objs[0].integer.value; + *lcnt = (u16)objs[1].integer.value; + if (sda_hold) + *sda_hold = (u32)objs[2].integer.value; + } + + kfree(buf.pointer); +} + static int dw_i2c_acpi_configure(struct platform_device *pdev) { struct dw_i2c_dev *dev = platform_get_drvdata(pdev); + bool fs_mode = dev->master_cfg & DW_IC_CON_SPEED_FAST; if (!ACPI_HANDLE(&pdev->dev)) return -ENODEV; @@ -64,6 +87,16 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) dev->adapter.nr = -1; dev->tx_fifo_depth = 32; dev->rx_fifo_depth = 32; + + /* + * Try to get SDA hold time and *CNT values from an ACPI method if + * it exists for both supported speed modes. + */ + dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, + fs_mode ? NULL : &dev->sda_hold_time); + dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, + fs_mode ? &dev->sda_hold_time : NULL); + return 0; } @@ -172,8 +205,6 @@ static int dw_i2c_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failure adding adapter\n"); return r; } - of_i2c_register_devices(adap); - acpi_i2c_register_devices(adap); pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); pm_runtime_use_autosuspend(&pdev->dev); @@ -207,7 +238,7 @@ static const struct of_device_id dw_i2c_of_match[] = { MODULE_DEVICE_TABLE(of, dw_i2c_of_match); #endif -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int dw_i2c_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -228,9 +259,12 @@ static int dw_i2c_resume(struct device *dev) return 0; } -#endif static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume); +#define DW_I2C_DEV_PM_OPS (&dw_i2c_dev_pm_ops) +#else +#define DW_I2C_DEV_PM_OPS NULL +#endif /* work with hotplug and coldplug */ MODULE_ALIAS("platform:i2c_designware"); @@ -242,7 +276,7 @@ static struct platform_driver dw_i2c_driver = { .owner = THIS_MODULE, .of_match_table = of_match_ptr(dw_i2c_of_match), .acpi_match_table = ACPI_PTR(dw_i2c_acpi_match), - .pm = &dw_i2c_dev_pm_ops, + .pm = DW_I2C_DEV_PM_OPS, }, }; diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index bc6e139c6e7f..bfa02c6c2dda 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -16,7 +16,6 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/of_gpio.h> -#include <linux/of_i2c.h> struct i2c_gpio_private_data { struct i2c_adapter adap; @@ -137,9 +136,9 @@ static int i2c_gpio_probe(struct platform_device *pdev) if (ret) return ret; } else { - if (!pdev->dev.platform_data) + if (!dev_get_platdata(&pdev->dev)) return -ENXIO; - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); sda_pin = pdata->sda_pin; scl_pin = pdata->scl_pin; } @@ -171,7 +170,7 @@ static int i2c_gpio_probe(struct platform_device *pdev) pdata->scl_pin = scl_pin; of_i2c_gpio_get_props(pdev->dev.of_node, pdata); } else { - memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); + memcpy(pdata, dev_get_platdata(&pdev->dev), sizeof(*pdata)); } if (pdata->sda_is_open_drain) { @@ -224,8 +223,6 @@ static int i2c_gpio_probe(struct platform_device *pdev) if (ret) goto err_add_bus; - of_i2c_register_devices(adap); - platform_set_drvdata(pdev, priv); dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n", diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 4ebceed6bc66..4296d1721272 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -87,7 +87,6 @@ #include <linux/slab.h> #include <linux/wait.h> #include <linux/err.h> -#include <linux/of_i2c.h> #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \ defined CONFIG_DMI @@ -1230,7 +1229,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) goto exit_free_irq; } - of_i2c_register_devices(&priv->adapter); i801_probe_optional_slaves(priv); /* We ignore errors - multiplexing is optional */ i801_add_mux(priv); diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 973f51688276..ff3caa0c28cd 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -42,7 +42,6 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/of_platform.h> -#include <linux/of_i2c.h> #include "i2c-ibm_iic.h" @@ -759,9 +758,6 @@ static int iic_probe(struct platform_device *ofdev) dev_info(&ofdev->dev, "using %s mode\n", dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); - /* Now register all the child nodes */ - of_i2c_register_devices(adap); - return 0; error_cleanup: diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index e24279725d36..ccf46656bdad 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -30,6 +30,8 @@ * Copyright (C) 2007 RightHand Technologies, Inc. * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt> * + * Copyright 2013 Freescale Semiconductor, Inc. + * */ /** Includes ******************************************************************* @@ -50,7 +52,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_i2c.h> #include <linux/platform_data/i2c-imx.h> /** Defines ******************************************************************** @@ -62,12 +63,22 @@ /* Default value */ #define IMX_I2C_BIT_RATE 100000 /* 100kHz */ -/* IMX I2C registers */ +/* IMX I2C registers: + * the I2C register offset is different between SoCs, + * to provid support for all these chips, split the + * register offset into a fixed base address and a + * variable shift value, then the full register offset + * will be calculated by + * reg_off = ( reg_base_addr << reg_shift) + */ #define IMX_I2C_IADR 0x00 /* i2c slave address */ -#define IMX_I2C_IFDR 0x04 /* i2c frequency divider */ -#define IMX_I2C_I2CR 0x08 /* i2c control */ -#define IMX_I2C_I2SR 0x0C /* i2c status */ -#define IMX_I2C_I2DR 0x10 /* i2c transfer data */ +#define IMX_I2C_IFDR 0x01 /* i2c frequency divider */ +#define IMX_I2C_I2CR 0x02 /* i2c control */ +#define IMX_I2C_I2SR 0x03 /* i2c status */ +#define IMX_I2C_I2DR 0x04 /* i2c transfer data */ + +#define IMX_I2C_REGSHIFT 2 +#define VF610_I2C_REGSHIFT 0 /* Bits of IMX I2C registers */ #define I2SR_RXAK 0x01 @@ -84,6 +95,19 @@ #define I2CR_IIEN 0x40 #define I2CR_IEN 0x80 +/* register bits different operating codes definition: + * 1) I2SR: Interrupt flags clear operation differ between SoCs: + * - write zero to clear(w0c) INT flag on i.MX, + * - but write one to clear(w1c) INT flag on Vybrid. + * 2) I2CR: I2C module enable operation also differ between SoCs: + * - set I2CR_IEN bit enable the module on i.MX, + * - but clear I2CR_IEN bit enable the module on Vybrid. + */ +#define I2SR_CLR_OPCODE_W0C 0x0 +#define I2SR_CLR_OPCODE_W1C (I2SR_IAL | I2SR_IIF) +#define I2CR_IEN_OPCODE_0 0x0 +#define I2CR_IEN_OPCODE_1 I2CR_IEN + /** Variables ****************************************************************** *******************************************************************************/ @@ -95,8 +119,12 @@ * * Duplicated divider values removed from list */ +struct imx_i2c_clk_pair { + u16 div; + u16 val; +}; -static u16 __initdata i2c_clk_div[50][2] = { +static struct imx_i2c_clk_pair imx_i2c_clk_div[] = { { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 }, { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 }, { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 }, @@ -112,9 +140,38 @@ static u16 __initdata i2c_clk_div[50][2] = { { 3072, 0x1E }, { 3840, 0x1F } }; +/* Vybrid VF610 clock divider, register value pairs */ +static struct imx_i2c_clk_pair vf610_i2c_clk_div[] = { + { 20, 0x00 }, { 22, 0x01 }, { 24, 0x02 }, { 26, 0x03 }, + { 28, 0x04 }, { 30, 0x05 }, { 32, 0x09 }, { 34, 0x06 }, + { 36, 0x0A }, { 40, 0x07 }, { 44, 0x0C }, { 48, 0x0D }, + { 52, 0x43 }, { 56, 0x0E }, { 60, 0x45 }, { 64, 0x12 }, + { 68, 0x0F }, { 72, 0x13 }, { 80, 0x14 }, { 88, 0x15 }, + { 96, 0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 }, + { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 }, + { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 }, + { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 }, + { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B }, + { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 }, + { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 }, + { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B }, + { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A }, + { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E }, +}; + enum imx_i2c_type { IMX1_I2C, IMX21_I2C, + VF610_I2C, +}; + +struct imx_i2c_hwdata { + enum imx_i2c_type devtype; + unsigned regshift; + struct imx_i2c_clk_pair *clk_div; + unsigned ndivs; + unsigned i2sr_clr_opcode; + unsigned i2cr_ien_opcode; }; struct imx_i2c_struct { @@ -126,16 +183,46 @@ struct imx_i2c_struct { unsigned int disable_delay; int stopped; unsigned int ifdr; /* IMX_I2C_IFDR */ - enum imx_i2c_type devtype; + const struct imx_i2c_hwdata *hwdata; +}; + +static const struct imx_i2c_hwdata imx1_i2c_hwdata = { + .devtype = IMX1_I2C, + .regshift = IMX_I2C_REGSHIFT, + .clk_div = imx_i2c_clk_div, + .ndivs = ARRAY_SIZE(imx_i2c_clk_div), + .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C, + .i2cr_ien_opcode = I2CR_IEN_OPCODE_1, + +}; + +static const struct imx_i2c_hwdata imx21_i2c_hwdata = { + .devtype = IMX21_I2C, + .regshift = IMX_I2C_REGSHIFT, + .clk_div = imx_i2c_clk_div, + .ndivs = ARRAY_SIZE(imx_i2c_clk_div), + .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C, + .i2cr_ien_opcode = I2CR_IEN_OPCODE_1, + +}; + +static struct imx_i2c_hwdata vf610_i2c_hwdata = { + .devtype = VF610_I2C, + .regshift = VF610_I2C_REGSHIFT, + .clk_div = vf610_i2c_clk_div, + .ndivs = ARRAY_SIZE(vf610_i2c_clk_div), + .i2sr_clr_opcode = I2SR_CLR_OPCODE_W1C, + .i2cr_ien_opcode = I2CR_IEN_OPCODE_0, + }; static struct platform_device_id imx_i2c_devtype[] = { { .name = "imx1-i2c", - .driver_data = IMX1_I2C, + .driver_data = (kernel_ulong_t)&imx1_i2c_hwdata, }, { .name = "imx21-i2c", - .driver_data = IMX21_I2C, + .driver_data = (kernel_ulong_t)&imx21_i2c_hwdata, }, { /* sentinel */ } @@ -143,15 +230,28 @@ static struct platform_device_id imx_i2c_devtype[] = { MODULE_DEVICE_TABLE(platform, imx_i2c_devtype); static const struct of_device_id i2c_imx_dt_ids[] = { - { .compatible = "fsl,imx1-i2c", .data = &imx_i2c_devtype[IMX1_I2C], }, - { .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], }, + { .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, }, + { .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, }, + { .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids); static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx) { - return i2c_imx->devtype == IMX1_I2C; + return i2c_imx->hwdata->devtype == IMX1_I2C; +} + +static inline void imx_i2c_write_reg(unsigned int val, + struct imx_i2c_struct *i2c_imx, unsigned int reg) +{ + writeb(val, i2c_imx->base + (reg << i2c_imx->hwdata->regshift)); +} + +static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx, + unsigned int reg) +{ + return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift)); } /** Functions for IMX I2C adapter driver *************************************** @@ -165,7 +265,7 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); while (1) { - temp = readb(i2c_imx->base + IMX_I2C_I2SR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR); if (for_busy && (temp & I2SR_IBB)) break; if (!for_busy && !(temp & I2SR_IBB)) @@ -196,7 +296,7 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx) static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx) { - if (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_RXAK) { + if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) { dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__); return -EIO; /* No ACK */ } @@ -213,25 +313,25 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); clk_prepare_enable(i2c_imx->clk); - writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR); + imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR); /* Enable I2C controller */ - writeb(0, i2c_imx->base + IMX_I2C_I2SR); - writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); + imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR); + imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR); /* Wait controller to be stable */ udelay(50); /* Start I2C transaction */ - temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp |= I2CR_MSTA; - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); result = i2c_imx_bus_busy(i2c_imx, 1); if (result) return result; i2c_imx->stopped = 0; temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK; - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); return result; } @@ -242,9 +342,9 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) if (!i2c_imx->stopped) { /* Stop I2C transaction */ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp &= ~(I2CR_MSTA | I2CR_MTX); - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); } if (is_imx1_i2c(i2c_imx)) { /* @@ -260,13 +360,15 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) } /* Disable I2C controller */ - writeb(0, i2c_imx->base + IMX_I2C_I2CR); + temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN, + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); clk_disable_unprepare(i2c_imx->clk); } static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, unsigned int rate) { + struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div; unsigned int i2c_clk_rate; unsigned int div; int i; @@ -274,15 +376,15 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, /* Divider value calculation */ i2c_clk_rate = clk_get_rate(i2c_imx->clk); div = (i2c_clk_rate + rate - 1) / rate; - if (div < i2c_clk_div[0][0]) + if (div < i2c_clk_div[0].div) i = 0; - else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0]) - i = ARRAY_SIZE(i2c_clk_div) - 1; + else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div) + i = i2c_imx->hwdata->ndivs - 1; else - for (i = 0; i2c_clk_div[i][0] < div; i++); + for (i = 0; i2c_clk_div[i].div < div; i++); /* Store divider value */ - i2c_imx->ifdr = i2c_clk_div[i][1]; + i2c_imx->ifdr = i2c_clk_div[i].val; /* * There dummy delay is calculated. @@ -290,7 +392,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, * This delay is used in I2C bus disable function * to fix chip hardware bug. */ - i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0] + i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2); /* dev_dbg() can't be used, because adapter is not yet registered */ @@ -298,7 +400,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n", __func__, i2c_clk_rate, div); dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n", - __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]); + __func__, i2c_clk_div[i].val, i2c_clk_div[i].div); #endif } @@ -307,12 +409,13 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id) struct imx_i2c_struct *i2c_imx = dev_id; unsigned int temp; - temp = readb(i2c_imx->base + IMX_I2C_I2SR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR); if (temp & I2SR_IIF) { /* save status register */ i2c_imx->i2csr = temp; temp &= ~I2SR_IIF; - writeb(temp, i2c_imx->base + IMX_I2C_I2SR); + temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF); + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); wake_up(&i2c_imx->queue); return IRQ_HANDLED; } @@ -328,7 +431,7 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) __func__, msgs->addr << 1); /* write slave address */ - writeb(msgs->addr << 1, i2c_imx->base + IMX_I2C_I2DR); + imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR); result = i2c_imx_trx_complete(i2c_imx); if (result) return result; @@ -342,7 +445,7 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) dev_dbg(&i2c_imx->adapter.dev, "<%s> write byte: B%d=0x%X\n", __func__, i, msgs->buf[i]); - writeb(msgs->buf[i], i2c_imx->base + IMX_I2C_I2DR); + imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR); result = i2c_imx_trx_complete(i2c_imx); if (result) return result; @@ -363,7 +466,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) __func__, (msgs->addr << 1) | 0x01); /* write slave address */ - writeb((msgs->addr << 1) | 0x01, i2c_imx->base + IMX_I2C_I2DR); + imx_i2c_write_reg((msgs->addr << 1) | 0x01, i2c_imx, IMX_I2C_I2DR); result = i2c_imx_trx_complete(i2c_imx); if (result) return result; @@ -374,12 +477,12 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__); /* setup bus to read data */ - temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp &= ~I2CR_MTX; if (msgs->len - 1) temp &= ~I2CR_TXAK; - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); - readb(i2c_imx->base + IMX_I2C_I2DR); /* dummy read */ + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); + imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */ dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__); @@ -393,19 +496,19 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) controller from generating another clock cycle */ dev_dbg(&i2c_imx->adapter.dev, "<%s> clear MSTA\n", __func__); - temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp &= ~(I2CR_MSTA | I2CR_MTX); - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); i2c_imx_bus_busy(i2c_imx, 0); i2c_imx->stopped = 1; } else if (i == (msgs->len - 2)) { dev_dbg(&i2c_imx->adapter.dev, "<%s> set TXAK\n", __func__); - temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp |= I2CR_TXAK; - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); } - msgs->buf[i] = readb(i2c_imx->base + IMX_I2C_I2DR); + msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); dev_dbg(&i2c_imx->adapter.dev, "<%s> read byte: B%d=0x%X\n", __func__, i, msgs->buf[i]); @@ -432,9 +535,9 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, if (i) { dev_dbg(&i2c_imx->adapter.dev, "<%s> repeated start\n", __func__); - temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); temp |= I2CR_RSTA; - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); result = i2c_imx_bus_busy(i2c_imx, 1); if (result) goto fail0; @@ -443,13 +546,13 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, "<%s> transfer message: %d\n", __func__, i); /* write/read data */ #ifdef CONFIG_I2C_DEBUG_BUS - temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); dev_dbg(&i2c_imx->adapter.dev, "<%s> CONTROL: IEN=%d, IIEN=%d, " "MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n", __func__, (temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0), (temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0), (temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0)); - temp = readb(i2c_imx->base + IMX_I2C_I2SR); + temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR); dev_dbg(&i2c_imx->adapter.dev, "<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, " "IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n", __func__, @@ -492,7 +595,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev) &pdev->dev); struct imx_i2c_struct *i2c_imx; struct resource *res; - struct imxi2c_platform_data *pdata = pdev->dev.platform_data; + struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev); void __iomem *base; int irq, ret; u32 bitrate; @@ -518,8 +621,10 @@ static int __init i2c_imx_probe(struct platform_device *pdev) } if (of_id) - pdev->id_entry = of_id->data; - i2c_imx->devtype = pdev->id_entry->driver_data; + i2c_imx->hwdata = of_id->data; + else + i2c_imx->hwdata = (struct imx_i2c_hwdata *) + platform_get_device_id(pdev)->driver_data; /* Setup i2c_imx driver structure */ strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name)); @@ -537,6 +642,11 @@ static int __init i2c_imx_probe(struct platform_device *pdev) return PTR_ERR(i2c_imx->clk); } + ret = clk_prepare_enable(i2c_imx->clk); + if (ret) { + dev_err(&pdev->dev, "can't enable I2C clock\n"); + return ret; + } /* Request IRQ */ ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0, pdev->name, i2c_imx); @@ -560,8 +670,9 @@ static int __init i2c_imx_probe(struct platform_device *pdev) i2c_imx_set_clk(i2c_imx, bitrate); /* Set up chip registers to defaults */ - writeb(0, i2c_imx->base + IMX_I2C_I2CR); - writeb(0, i2c_imx->base + IMX_I2C_I2SR); + imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN, + i2c_imx, IMX_I2C_I2CR); + imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR); /* Add I2C adapter */ ret = i2c_add_numbered_adapter(&i2c_imx->adapter); @@ -570,10 +681,9 @@ static int __init i2c_imx_probe(struct platform_device *pdev) return ret; } - of_i2c_register_devices(&i2c_imx->adapter); - /* Set up platform driver data */ platform_set_drvdata(pdev, i2c_imx); + clk_disable_unprepare(i2c_imx->clk); dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq); dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n", @@ -596,10 +706,10 @@ static int __exit i2c_imx_remove(struct platform_device *pdev) i2c_del_adapter(&i2c_imx->adapter); /* setup chip registers to defaults */ - writeb(0, i2c_imx->base + IMX_I2C_IADR); - writeb(0, i2c_imx->base + IMX_I2C_IFDR); - writeb(0, i2c_imx->base + IMX_I2C_I2CR); - writeb(0, i2c_imx->base + IMX_I2C_I2SR); + imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR); + imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR); + imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR); + imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR); return 0; } diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index cd82eb44e4c4..8ed79a086f85 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -879,6 +879,7 @@ ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id) DMA_BIT_MASK(32)) != 0)) { dev_err(&pdev->dev, "pci_set_dma_mask fail %p\n", pdev); + err = -ENODEV; goto fail; } } diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 7607dc061918..b80c76888cab 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -18,9 +18,9 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/of_platform.h> -#include <linux/of_i2c.h> #include <linux/slab.h> +#include <linux/clk.h> #include <linux/io.h> #include <linux/fsl_devices.h> #include <linux/i2c.h> @@ -64,9 +64,10 @@ struct mpc_i2c { struct i2c_adapter adap; int irq; u32 real_clk; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP u8 fdr, dfsrr; #endif + struct clk *clk_per; }; struct mpc_i2c_divider { @@ -609,7 +610,6 @@ static const struct i2c_algorithm mpc_algo = { static struct i2c_adapter mpc_ops = { .owner = THIS_MODULE, - .name = "MPC adapter", .algo = &mpc_algo, .timeout = HZ, }; @@ -623,6 +623,9 @@ static int fsl_i2c_probe(struct platform_device *op) u32 clock = MPC_I2C_CLOCK_LEGACY; int result = 0; int plen; + struct resource res; + struct clk *clk; + int err; match = of_match_device(mpc_i2c_of_match, &op->dev); if (!match) @@ -653,6 +656,21 @@ static int fsl_i2c_probe(struct platform_device *op) } } + /* + * enable clock for the I2C peripheral (non fatal), + * keep a reference upon successful allocation + */ + clk = devm_clk_get(&op->dev, NULL); + if (!IS_ERR(clk)) { + err = clk_prepare_enable(clk); + if (err) { + dev_err(&op->dev, "failed to enable clock\n"); + goto fail_request; + } else { + i2c->clk_per = clk; + } + } + if (of_get_property(op->dev.of_node, "fsl,preserve-clocking", NULL)) { clock = MPC_I2C_CLOCK_PRESERVE; } else { @@ -682,6 +700,9 @@ static int fsl_i2c_probe(struct platform_device *op) platform_set_drvdata(op, i2c); i2c->adap = mpc_ops; + of_address_to_resource(op->dev.of_node, 0, &res); + scnprintf(i2c->adap.name, sizeof(i2c->adap.name), + "MPC adapter at 0x%llx", (unsigned long long)res.start); i2c_set_adapdata(&i2c->adap, i2c); i2c->adap.dev.parent = &op->dev; i2c->adap.dev.of_node = of_node_get(op->dev.of_node); @@ -691,11 +712,12 @@ static int fsl_i2c_probe(struct platform_device *op) dev_err(i2c->dev, "failed to add adapter\n"); goto fail_add; } - of_i2c_register_devices(&i2c->adap); return result; fail_add: + if (i2c->clk_per) + clk_disable_unprepare(i2c->clk_per); free_irq(i2c->irq, i2c); fail_request: irq_dispose_mapping(i2c->irq); @@ -711,6 +733,9 @@ static int fsl_i2c_remove(struct platform_device *op) i2c_del_adapter(&i2c->adap); + if (i2c->clk_per) + clk_disable_unprepare(i2c->clk_per); + if (i2c->irq) free_irq(i2c->irq, i2c); @@ -720,7 +745,7 @@ static int fsl_i2c_remove(struct platform_device *op) return 0; }; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int mpc_i2c_suspend(struct device *dev) { struct mpc_i2c *i2c = dev_get_drvdata(dev); @@ -741,7 +766,10 @@ static int mpc_i2c_resume(struct device *dev) return 0; } -SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume); +static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume); +#define MPC_I2C_PM_OPS (&mpc_i2c_pm_ops) +#else +#define MPC_I2C_PM_OPS NULL #endif static const struct mpc_i2c_data mpc_i2c_data_512x = { @@ -788,9 +816,7 @@ static struct platform_driver mpc_i2c_driver = { .owner = THIS_MODULE, .name = DRV_NAME, .of_match_table = mpc_i2c_of_match, -#ifdef CONFIG_PM - .pm = &mpc_i2c_pm_ops, -#endif + .pm = MPC_I2C_PM_OPS, }, }; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index b1f42bf40963..7f3a47443494 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -21,9 +21,9 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_irq.h> -#include <linux/of_i2c.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/delay.h> #define MV64XXX_I2C_ADDR_ADDR(val) ((val & 0x7f) << 1) #define MV64XXX_I2C_BAUD_DIV_N(val) (val & 0x7) @@ -55,6 +55,32 @@ #define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8 #define MV64XXX_I2C_STATUS_NO_STATUS 0xf8 +/* Register defines (I2C bridge) */ +#define MV64XXX_I2C_REG_TX_DATA_LO 0xc0 +#define MV64XXX_I2C_REG_TX_DATA_HI 0xc4 +#define MV64XXX_I2C_REG_RX_DATA_LO 0xc8 +#define MV64XXX_I2C_REG_RX_DATA_HI 0xcc +#define MV64XXX_I2C_REG_BRIDGE_CONTROL 0xd0 +#define MV64XXX_I2C_REG_BRIDGE_STATUS 0xd4 +#define MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE 0xd8 +#define MV64XXX_I2C_REG_BRIDGE_INTR_MASK 0xdC +#define MV64XXX_I2C_REG_BRIDGE_TIMING 0xe0 + +/* Bridge Control values */ +#define MV64XXX_I2C_BRIDGE_CONTROL_WR 0x00000001 +#define MV64XXX_I2C_BRIDGE_CONTROL_RD 0x00000002 +#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT 2 +#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT 0x00001000 +#define MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT 13 +#define MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT 16 +#define MV64XXX_I2C_BRIDGE_CONTROL_ENABLE 0x00080000 + +/* Bridge Status values */ +#define MV64XXX_I2C_BRIDGE_STATUS_ERROR 0x00000001 +#define MV64XXX_I2C_STATUS_OFFLOAD_ERROR 0xf0000001 +#define MV64XXX_I2C_STATUS_OFFLOAD_OK 0xf0000000 + + /* Driver states */ enum { MV64XXX_I2C_STATE_INVALID, @@ -71,14 +97,17 @@ enum { enum { MV64XXX_I2C_ACTION_INVALID, MV64XXX_I2C_ACTION_CONTINUE, + MV64XXX_I2C_ACTION_OFFLOAD_SEND_START, MV64XXX_I2C_ACTION_SEND_START, MV64XXX_I2C_ACTION_SEND_RESTART, + MV64XXX_I2C_ACTION_OFFLOAD_RESTART, MV64XXX_I2C_ACTION_SEND_ADDR_1, MV64XXX_I2C_ACTION_SEND_ADDR_2, MV64XXX_I2C_ACTION_SEND_DATA, MV64XXX_I2C_ACTION_RCV_DATA, MV64XXX_I2C_ACTION_RCV_DATA_STOP, MV64XXX_I2C_ACTION_SEND_STOP, + MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP, }; struct mv64xxx_i2c_regs { @@ -117,6 +146,9 @@ struct mv64xxx_i2c_data { spinlock_t lock; struct i2c_msg *msg; struct i2c_adapter adapter; + bool offload_enabled; +/* 5us delay in order to avoid repeated start timing violation */ + bool errata_delay; }; static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = { @@ -165,6 +197,77 @@ mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data, } } +static int mv64xxx_i2c_offload_msg(struct mv64xxx_i2c_data *drv_data) +{ + unsigned long data_reg_hi = 0; + unsigned long data_reg_lo = 0; + unsigned long ctrl_reg; + struct i2c_msg *msg = drv_data->msgs; + + drv_data->msg = msg; + drv_data->byte_posn = 0; + drv_data->bytes_left = msg->len; + drv_data->aborting = 0; + drv_data->rc = 0; + /* Only regular transactions can be offloaded */ + if ((msg->flags & ~(I2C_M_TEN | I2C_M_RD)) != 0) + return -EINVAL; + + /* Only 1-8 byte transfers can be offloaded */ + if (msg->len < 1 || msg->len > 8) + return -EINVAL; + + /* Build transaction */ + ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE | + (msg->addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT); + + if ((msg->flags & I2C_M_TEN) != 0) + ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT; + + if ((msg->flags & I2C_M_RD) == 0) { + u8 local_buf[8] = { 0 }; + + memcpy(local_buf, msg->buf, msg->len); + data_reg_lo = cpu_to_le32(*((u32 *)local_buf)); + data_reg_hi = cpu_to_le32(*((u32 *)(local_buf+4))); + + ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR | + (msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT; + + writel_relaxed(data_reg_lo, + drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO); + writel_relaxed(data_reg_hi, + drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI); + + } else { + ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD | + (msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT; + } + + /* Execute transaction */ + writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL); + + return 0; +} + +static void +mv64xxx_i2c_update_offload_data(struct mv64xxx_i2c_data *drv_data) +{ + struct i2c_msg *msg = drv_data->msg; + + if (msg->flags & I2C_M_RD) { + u32 data_reg_lo = readl(drv_data->reg_base + + MV64XXX_I2C_REG_RX_DATA_LO); + u32 data_reg_hi = readl(drv_data->reg_base + + MV64XXX_I2C_REG_RX_DATA_HI); + u8 local_buf[8] = { 0 }; + + *((u32 *)local_buf) = le32_to_cpu(data_reg_lo); + *((u32 *)(local_buf+4)) = le32_to_cpu(data_reg_hi); + memcpy(msg->buf, local_buf, msg->len); + } + +} /* ***************************************************************************** * @@ -177,6 +280,15 @@ mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data, static void mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data) { + if (drv_data->offload_enabled) { + writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL); + writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_TIMING); + writel(0, drv_data->reg_base + + MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE); + writel(0, drv_data->reg_base + + MV64XXX_I2C_REG_BRIDGE_INTR_MASK); + } + writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset); writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n), drv_data->reg_base + drv_data->reg_offsets.clock); @@ -283,6 +395,16 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status) drv_data->rc = -ENXIO; break; + case MV64XXX_I2C_STATUS_OFFLOAD_OK: + if (drv_data->send_stop || drv_data->aborting) { + drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP; + drv_data->state = MV64XXX_I2C_STATE_IDLE; + } else { + drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_RESTART; + drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_RESTART; + } + break; + default: dev_err(&drv_data->adapter.dev, "mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, " @@ -299,19 +421,29 @@ static void mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) { switch(drv_data->action) { + case MV64XXX_I2C_ACTION_OFFLOAD_RESTART: + mv64xxx_i2c_update_offload_data(drv_data); + writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL); + writel(0, drv_data->reg_base + + MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE); + /* FALLTHRU */ case MV64XXX_I2C_ACTION_SEND_RESTART: /* We should only get here if we have further messages */ BUG_ON(drv_data->num_msgs == 0); - drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START; - writel(drv_data->cntl_bits, - drv_data->reg_base + drv_data->reg_offsets.control); - drv_data->msgs++; drv_data->num_msgs--; + if (!(drv_data->offload_enabled && + mv64xxx_i2c_offload_msg(drv_data))) { + drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START; + writel(drv_data->cntl_bits, + drv_data->reg_base + drv_data->reg_offsets.control); - /* Setup for the next message */ - mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs); + /* Setup for the next message */ + mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs); + } + if (drv_data->errata_delay) + udelay(5); /* * We're never at the start of the message here, and by this @@ -326,6 +458,12 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) drv_data->reg_base + drv_data->reg_offsets.control); break; + case MV64XXX_I2C_ACTION_OFFLOAD_SEND_START: + if (!mv64xxx_i2c_offload_msg(drv_data)) + break; + else + drv_data->action = MV64XXX_I2C_ACTION_SEND_START; + /* FALLTHRU */ case MV64XXX_I2C_ACTION_SEND_START: writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START, drv_data->reg_base + drv_data->reg_offsets.control); @@ -366,6 +504,9 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, drv_data->reg_base + drv_data->reg_offsets.control); drv_data->block = 0; + if (drv_data->errata_delay) + udelay(5); + wake_up(&drv_data->waitq); break; @@ -375,6 +516,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) "mv64xxx_i2c_do_action: Invalid action: %d\n", drv_data->action); drv_data->rc = -EIO; + /* FALLTHRU */ case MV64XXX_I2C_ACTION_SEND_STOP: drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN; @@ -383,6 +525,15 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) drv_data->block = 0; wake_up(&drv_data->waitq); break; + + case MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP: + mv64xxx_i2c_update_offload_data(drv_data); + writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL); + writel(0, drv_data->reg_base + + MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE); + drv_data->block = 0; + wake_up(&drv_data->waitq); + break; } } @@ -395,6 +546,21 @@ mv64xxx_i2c_intr(int irq, void *dev_id) irqreturn_t rc = IRQ_NONE; spin_lock_irqsave(&drv_data->lock, flags); + + if (drv_data->offload_enabled) { + while (readl(drv_data->reg_base + + MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE)) { + int reg_status = readl(drv_data->reg_base + + MV64XXX_I2C_REG_BRIDGE_STATUS); + if (reg_status & MV64XXX_I2C_BRIDGE_STATUS_ERROR) + status = MV64XXX_I2C_STATUS_OFFLOAD_ERROR; + else + status = MV64XXX_I2C_STATUS_OFFLOAD_OK; + mv64xxx_i2c_fsm(drv_data, status); + mv64xxx_i2c_do_action(drv_data); + rc = IRQ_HANDLED; + } + } while (readl(drv_data->reg_base + drv_data->reg_offsets.control) & MV64XXX_I2C_REG_CONTROL_IFLG) { status = readl(drv_data->reg_base + drv_data->reg_offsets.status); @@ -459,11 +625,15 @@ mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg, unsigned long flags; spin_lock_irqsave(&drv_data->lock, flags); - mv64xxx_i2c_prepare_for_io(drv_data, msg); - - drv_data->action = MV64XXX_I2C_ACTION_SEND_START; - drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND; + if (drv_data->offload_enabled) { + drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_START; + drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND; + } else { + mv64xxx_i2c_prepare_for_io(drv_data, msg); + drv_data->action = MV64XXX_I2C_ACTION_SEND_START; + drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND; + } drv_data->send_stop = is_last; drv_data->block = 1; mv64xxx_i2c_do_action(drv_data); @@ -521,6 +691,7 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = { static const struct of_device_id mv64xxx_i2c_of_match_table[] = { { .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i}, { .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx}, + { .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx}, {} }; MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table); @@ -601,6 +772,15 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets)); + /* + * For controllers embedded in new SoCs activate the + * Transaction Generator support and the errata fix. + */ + if (of_device_is_compatible(np, "marvell,mv78230-i2c")) { + drv_data->offload_enabled = true; + drv_data->errata_delay = true; + } + out: return rc; #endif @@ -618,7 +798,7 @@ static int mv64xxx_i2c_probe(struct platform_device *pd) { struct mv64xxx_i2c_data *drv_data; - struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data; + struct mv64xxx_i2c_pdata *pdata = dev_get_platdata(&pd->dev); struct resource *r; int rc; @@ -654,6 +834,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) drv_data->freq_n = pdata->freq_n; drv_data->irq = platform_get_irq(pd, 0); drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout); + drv_data->offload_enabled = false; memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets)); } else if (pd->dev.of_node) { rc = mv64xxx_of_config(drv_data, &pd->dev); @@ -689,8 +870,6 @@ mv64xxx_i2c_probe(struct platform_device *pd) goto exit_free_irq; } - of_i2c_register_devices(&drv_data->adapter); - return 0; exit_free_irq: diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index e2e9a0dade96..f4a01675fa71 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -27,7 +27,6 @@ #include <linux/stmp_device.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_i2c.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> @@ -114,18 +113,21 @@ struct mxs_i2c_dev { uint32_t timing0; uint32_t timing1; + uint32_t timing2; /* DMA support components */ - struct dma_chan *dmach; + struct dma_chan *dmach; uint32_t pio_data[2]; uint32_t addr_data; struct scatterlist sg_io[2]; bool dma_read; }; -static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) +static int mxs_i2c_reset(struct mxs_i2c_dev *i2c) { - stmp_reset_block(i2c->regs); + int ret = stmp_reset_block(i2c->regs); + if (ret) + return ret; /* * Configure timing for the I2C block. The I2C TIMING2 register has to @@ -136,9 +138,11 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c) */ writel(i2c->timing0, i2c->regs + MXS_I2C_TIMING0); writel(i2c->timing1, i2c->regs + MXS_I2C_TIMING1); - writel(0x00300030, i2c->regs + MXS_I2C_TIMING2); + writel(i2c->timing2, i2c->regs + MXS_I2C_TIMING2); writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET); + + return 0; } static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c) @@ -475,7 +479,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) { struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap); - int ret; + int ret, err; int flags; flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; @@ -495,8 +499,11 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, i2c->cmd_err = 0; if (0) { /* disable PIO mode until a proper fix is made */ ret = mxs_i2c_pio_setup_xfer(adap, msg, flags); - if (ret) - mxs_i2c_reset(i2c); + if (ret) { + err = mxs_i2c_reset(i2c); + if (err) + return err; + } } else { INIT_COMPLETION(i2c->cmd_complete); ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); @@ -527,7 +534,10 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, timeout: dev_dbg(i2c->dev, "Timeout!\n"); mxs_i2c_dma_finish(i2c); - mxs_i2c_reset(i2c); + ret = mxs_i2c_reset(i2c); + if (ret) + return ret; + return -ETIMEDOUT; } @@ -577,41 +587,79 @@ static const struct i2c_algorithm mxs_i2c_algo = { .functionality = mxs_i2c_func, }; -static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, int speed) +static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, uint32_t speed) { - /* The I2C block clock run at 24MHz */ + /* The I2C block clock runs at 24MHz */ const uint32_t clk = 24000000; - uint32_t base; + uint32_t divider; uint16_t high_count, low_count, rcv_count, xmit_count; + uint32_t bus_free, leadin; struct device *dev = i2c->dev; - if (speed > 540000) { - dev_warn(dev, "Speed too high (%d Hz), using 540 kHz\n", speed); - speed = 540000; - } else if (speed < 12000) { - dev_warn(dev, "Speed too low (%d Hz), using 12 kHz\n", speed); - speed = 12000; + divider = DIV_ROUND_UP(clk, speed); + + if (divider < 25) { + /* + * limit the divider, so that min(low_count, high_count) + * is >= 1 + */ + divider = 25; + dev_warn(dev, + "Speed too high (%u.%03u kHz), using %u.%03u kHz\n", + speed / 1000, speed % 1000, + clk / divider / 1000, clk / divider % 1000); + } else if (divider > 1897) { + /* + * limit the divider, so that max(low_count, high_count) + * cannot exceed 1023 + */ + divider = 1897; + dev_warn(dev, + "Speed too low (%u.%03u kHz), using %u.%03u kHz\n", + speed / 1000, speed % 1000, + clk / divider / 1000, clk / divider % 1000); } /* - * The timing derivation algorithm. There is no documentation for this - * algorithm available, it was derived by using the scope and fiddling - * with constants until the result observed on the scope was good enough - * for 20kHz, 50kHz, 100kHz, 200kHz, 300kHz and 400kHz. It should be - * possible to assume the algorithm works for other frequencies as well. + * The I2C spec specifies the following timing data: + * standard mode fast mode Bitfield name + * tLOW (SCL LOW period) 4700 ns 1300 ns + * tHIGH (SCL HIGH period) 4000 ns 600 ns + * tSU;DAT (data setup time) 250 ns 100 ns + * tHD;STA (START hold time) 4000 ns 600 ns + * tBUF (bus free time) 4700 ns 1300 ns * - * Note it was necessary to cap the frequency on both ends as it's not - * possible to configure completely arbitrary frequency for the I2C bus - * clock. + * The hardware (of the i.MX28 at least) seems to add 2 additional + * clock cycles to the low_count and 7 cycles to the high_count. + * This is compensated for by subtracting the respective constants + * from the values written to the timing registers. */ - base = ((clk / speed) - 38) / 2; - high_count = base + 3; - low_count = base - 3; - rcv_count = (high_count * 3) / 4; - xmit_count = low_count / 4; + if (speed > 100000) { + /* fast mode */ + low_count = DIV_ROUND_CLOSEST(divider * 13, (13 + 6)); + high_count = DIV_ROUND_CLOSEST(divider * 6, (13 + 6)); + leadin = DIV_ROUND_UP(600 * (clk / 1000000), 1000); + bus_free = DIV_ROUND_UP(1300 * (clk / 1000000), 1000); + } else { + /* normal mode */ + low_count = DIV_ROUND_CLOSEST(divider * 47, (47 + 40)); + high_count = DIV_ROUND_CLOSEST(divider * 40, (47 + 40)); + leadin = DIV_ROUND_UP(4700 * (clk / 1000000), 1000); + bus_free = DIV_ROUND_UP(4700 * (clk / 1000000), 1000); + } + rcv_count = high_count * 3 / 8; + xmit_count = low_count * 3 / 8; + + dev_dbg(dev, + "speed=%u(actual %u) divider=%u low=%u high=%u xmit=%u rcv=%u leadin=%u bus_free=%u\n", + speed, clk / divider, divider, low_count, high_count, + xmit_count, rcv_count, leadin, bus_free); + low_count -= 2; + high_count -= 7; i2c->timing0 = (high_count << 16) | rcv_count; i2c->timing1 = (low_count << 16) | xmit_count; + i2c->timing2 = (bus_free << 16 | leadin); } static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) @@ -683,7 +731,9 @@ static int mxs_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c); /* Do reset to enforce correct startup after pinmuxing */ - mxs_i2c_reset(i2c); + err = mxs_i2c_reset(i2c); + if (err) + return err; adap = &i2c->adapter; strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name)); @@ -701,8 +751,6 @@ static int mxs_i2c_probe(struct platform_device *pdev) return err; } - of_i2c_register_devices(adap); - return 0; } diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 512dfe609706..8bf9ac01301a 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -24,7 +24,6 @@ #include <linux/pm_runtime.h> #include <linux/platform_data/i2c-nomadik.h> #include <linux/of.h> -#include <linux/of_i2c.h> #include <linux/pinctrl/consumer.h> #define DRIVER_NAME "nmk-i2c" @@ -943,7 +942,7 @@ static void nmk_i2c_of_probe(struct device_node *np, static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; - struct nmk_i2c_controller *pdata = adev->dev.platform_data; + struct nmk_i2c_controller *pdata = dev_get_platdata(&adev->dev); struct device_node *np = adev->dev.of_node; struct nmk_i2c_dev *dev; struct i2c_adapter *adap; @@ -1045,8 +1044,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id) goto err_add_adap; } - of_i2c_register_devices(adap); - pm_runtime_put(&adev->dev); return 0; diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c index 865ee350adb3..36394d737faf 100644 --- a/drivers/i2c/busses/i2c-nuc900.c +++ b/drivers/i2c/busses/i2c-nuc900.c @@ -525,7 +525,7 @@ static int nuc900_i2c_probe(struct platform_device *pdev) struct resource *res; int ret; - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); if (!pdata) { dev_err(&pdev->dev, "no platform data\n"); return -EINVAL; diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 0e1f8245e768..c61f37a10a07 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -24,7 +24,6 @@ #include <linux/i2c-ocores.h> #include <linux/slab.h> #include <linux/io.h> -#include <linux/of_i2c.h> #include <linux/log2.h> struct ocores_i2c { @@ -353,10 +352,6 @@ static int ocores_i2c_probe(struct platform_device *pdev) int ret; int i; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; @@ -365,11 +360,12 @@ static int ocores_i2c_probe(struct platform_device *pdev) if (!i2c) return -ENOMEM; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); i2c->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(i2c->base)) return PTR_ERR(i2c->base); - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); if (pdata) { i2c->reg_shift = pdata->reg_shift; i2c->reg_io_width = pdata->reg_io_width; @@ -435,8 +431,6 @@ static int ocores_i2c_probe(struct platform_device *pdev) if (pdata) { for (i = 0; i < pdata->num_devices; i++) i2c_new_device(&i2c->adap, pdata->devices + i); - } else { - of_i2c_register_devices(&i2c->adap); } return 0; @@ -456,7 +450,7 @@ static int ocores_i2c_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ocores_i2c_suspend(struct device *dev) { struct ocores_i2c *i2c = dev_get_drvdata(dev); diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index 956fe320f313..b929ba271b47 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -15,7 +15,6 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_i2c.h> #include <linux/delay.h> #include <linux/sched.h> #include <linux/slab.h> @@ -599,8 +598,6 @@ static int octeon_i2c_probe(struct platform_device *pdev) } dev_info(i2c->dev, "version %s\n", DRV_VERSION); - of_i2c_register_devices(&i2c->adap); - return 0; out: diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 142b694d1c60..6d8308d5dc4e 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -38,12 +38,10 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/of.h> -#include <linux/of_i2c.h> #include <linux/of_device.h> #include <linux/slab.h> #include <linux/i2c-omap.h> #include <linux/pm_runtime.h> -#include <linux/pinctrl/consumer.h> /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20 @@ -216,8 +214,6 @@ struct omap_i2c_dev { u16 syscstate; u16 westate; u16 errata; - - struct pinctrl *pins; }; static const u8 reg_map_ip_v1[] = { @@ -618,11 +614,10 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, if (dev->cmd_err & OMAP_I2C_STAT_NACK) { if (msg->flags & I2C_M_IGNORE_NAK) return 0; - if (stop) { - w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); - w |= OMAP_I2C_CON_STP; - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); - } + + w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); + w |= OMAP_I2C_CON_STP; + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); return -EREMOTEIO; } return -EIO; @@ -1079,7 +1074,7 @@ omap_i2c_probe(struct platform_device *pdev) struct i2c_adapter *adap; struct resource *mem; const struct omap_i2c_bus_platform_data *pdata = - pdev->dev.platform_data; + dev_get_platdata(&pdev->dev); struct device_node *node = pdev->dev.of_node; const struct of_device_id *match; int irq; @@ -1120,16 +1115,6 @@ omap_i2c_probe(struct platform_device *pdev) dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; } - dev->pins = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(dev->pins)) { - if (PTR_ERR(dev->pins) == -EPROBE_DEFER) - return -EPROBE_DEFER; - - dev_warn(&pdev->dev, "did not get pins for i2c error: %li\n", - PTR_ERR(dev->pins)); - dev->pins = NULL; - } - dev->dev = &pdev->dev; dev->irq = irq; @@ -1245,8 +1230,6 @@ omap_i2c_probe(struct platform_device *pdev) dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr, major, minor, dev->speed); - of_i2c_register_devices(adap); - pm_runtime_mark_last_busy(dev->dev); pm_runtime_put_autosuspend(dev->dev); diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index aa00df14e30b..39e2755e3f25 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -136,7 +136,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev) struct i2c_pca_pf_data *i2c; struct resource *res; struct i2c_pca9564_pf_platform_data *platform_data = - pdev->dev.platform_data; + dev_get_platdata(&pdev->dev); int ret = 0; int irq; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index d05ad590af29..a028617b8f13 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -231,11 +231,11 @@ static int piix4_setup(struct pci_dev *PIIX4_dev, } static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, - const struct pci_device_id *id) + const struct pci_device_id *id, u8 aux) { unsigned short piix4_smba; unsigned short smba_idx = 0xcd6; - u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; + u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en; /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { @@ -245,6 +245,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, } /* Determine the address of the SMBus areas */ + smb_en = (aux) ? 0x28 : 0x2c; + if (!request_region(smba_idx, 2, "smba_idx")) { dev_err(&PIIX4_dev->dev, "SMBus base address index region " "0x%x already in use!\n", smba_idx); @@ -272,6 +274,13 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, return -EBUSY; } + /* Aux SMBus does not support IRQ information */ + if (aux) { + dev_info(&PIIX4_dev->dev, + "SMBus Host Controller at 0x%x\n", piix4_smba); + return piix4_smba; + } + /* Request the SMBus I2C bus config region */ if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) { dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " @@ -597,7 +606,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) dev->revision >= 0x40) || dev->vendor == PCI_VENDOR_ID_AMD) /* base address location etc changed in SB800 */ - retval = piix4_setup_sb800(dev, id); + retval = piix4_setup_sb800(dev, id, 0); else retval = piix4_setup(dev, id); @@ -611,17 +620,29 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) return retval; /* Check for auxiliary SMBus on some AMD chipsets */ + retval = -ENODEV; + if (dev->vendor == PCI_VENDOR_ID_ATI && - dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && - dev->revision < 0x40) { - retval = piix4_setup_aux(dev, id, 0x58); - if (retval > 0) { - /* Try to add the aux adapter if it exists, - * piix4_add_adapter will clean up if this fails */ - piix4_add_adapter(dev, retval, &piix4_aux_adapter); + dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) { + if (dev->revision < 0x40) { + retval = piix4_setup_aux(dev, id, 0x58); + } else { + /* SB800 added aux bus too */ + retval = piix4_setup_sb800(dev, id, 1); } } + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) { + retval = piix4_setup_sb800(dev, id, 1); + } + + if (retval > 0) { + /* Try to add the aux adapter if it exists, + * piix4_add_adapter will clean up if this fails */ + piix4_add_adapter(dev, retval, &piix4_aux_adapter); + } + return 0; } diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 5f39c6d8117a..1a9ea25f2314 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -23,7 +23,6 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/slab.h> -#include <linux/of_i2c.h> #define I2C_PNX_TIMEOUT_DEFAULT 10 /* msec */ #define I2C_PNX_SPEED_KHZ_DEFAULT 100 @@ -595,7 +594,7 @@ static struct i2c_algorithm pnx_algorithm = { .functionality = i2c_pnx_func, }; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int i2c_pnx_controller_suspend(struct device *dev) { struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev); @@ -727,7 +726,8 @@ static int i2c_pnx_probe(struct platform_device *pdev) alg_data->irq = platform_get_irq(pdev, 0); if (alg_data->irq < 0) { dev_err(&pdev->dev, "Failed to get IRQ from platform resource\n"); - goto out_irq; + ret = alg_data->irq; + goto out_clock; } ret = request_irq(alg_data->irq, i2c_pnx_interrupt, 0, pdev->name, alg_data); @@ -741,8 +741,6 @@ static int i2c_pnx_probe(struct platform_device *pdev) goto out_irq; } - of_i2c_register_devices(&alg_data->adapter); - dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n", alg_data->adapter.name, res->start, alg_data->irq); diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 8dc90da1e6e6..37e8cfad625b 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -398,7 +398,7 @@ static void i2c_powermac_register_devices(struct i2c_adapter *adap, static int i2c_powermac_probe(struct platform_device *dev) { - struct pmac_i2c_bus *bus = dev->dev.platform_data; + struct pmac_i2c_bus *bus = dev_get_platdata(&dev->dev); struct device_node *parent = NULL; struct i2c_adapter *adapter; const char *basename; @@ -440,22 +440,24 @@ static int i2c_powermac_probe(struct platform_device *dev) adapter->algo = &i2c_powermac_algorithm; i2c_set_adapdata(adapter, bus); adapter->dev.parent = &dev->dev; - adapter->dev.of_node = dev->dev.of_node; + + /* Clear of_node to skip automatic registration of i2c child nodes */ + adapter->dev.of_node = NULL; rc = i2c_add_adapter(adapter); if (rc) { printk(KERN_ERR "i2c-powermac: Adapter %s registration " "failed\n", adapter->name); memset(adapter, 0, sizeof(*adapter)); + return rc; } printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name); - /* Cannot use of_i2c_register_devices() due to Apple device-tree - * funkyness - */ + /* Use custom child registration due to Apple device-tree funkyness */ + adapter->dev.of_node = dev->dev.of_node; i2c_powermac_register_devices(adapter, bus); - return rc; + return 0; } static struct platform_driver i2c_powermac_driver = { diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c index 37a84c87c5fd..ac80199885be 100644 --- a/drivers/i2c/busses/i2c-puv3.c +++ b/drivers/i2c/busses/i2c-puv3.c @@ -245,7 +245,7 @@ static int puv3_i2c_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int puv3_i2c_suspend(struct device *dev) { int poll_count; diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index fbafed29fb81..bbe6dfbc5c05 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -31,7 +31,6 @@ #include <linux/i2c-pxa.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_i2c.h> #include <linux/platform_device.h> #include <linux/err.h> #include <linux/clk.h> @@ -110,6 +109,8 @@ MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); #define ICR_SADIE (1 << 13) /* slave address detected int enable */ #define ICR_UR (1 << 14) /* unit reset */ #define ICR_FM (1 << 15) /* fast mode */ +#define ICR_HS (1 << 16) /* High Speed mode */ +#define ICR_GPIOEN (1 << 19) /* enable GPIO mode for SCL in HS */ #define ISR_RWM (1 << 0) /* read/write mode */ #define ISR_ACKNAK (1 << 1) /* ack/nak status */ @@ -155,6 +156,10 @@ struct pxa_i2c { int irq; unsigned int use_pio :1; unsigned int fast_mode :1; + unsigned int high_mode:1; + unsigned char master_code; + unsigned long rate; + bool highmode_enter; }; #define _IBMR(i2c) ((i2c)->reg_ibmr) @@ -459,6 +464,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) /* set control register values */ writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c)); + writel(readl(_ICR(i2c)) | (i2c->high_mode ? ICR_HS : 0), _ICR(i2c)); #ifdef CONFIG_I2C_PXA_SLAVE dev_info(&i2c->adap.dev, "Enabling slave mode\n"); @@ -680,6 +686,34 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) return 0; } +/* + * PXA I2C send master code + * 1. Load master code to IDBR and send it. + * Note for HS mode, set ICR [GPIOEN]. + * 2. Wait until win arbitration. + */ +static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c) +{ + u32 icr; + long timeout; + + spin_lock_irq(&i2c->lock); + i2c->highmode_enter = true; + writel(i2c->master_code, _IDBR(i2c)); + + icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); + icr |= ICR_GPIOEN | ICR_START | ICR_TB | ICR_ITEIE; + writel(icr, _ICR(i2c)); + + spin_unlock_irq(&i2c->lock); + timeout = wait_event_timeout(i2c->wait, + i2c->highmode_enter == false, HZ * 1); + + i2c->highmode_enter = false; + + return (timeout == 0) ? I2C_RETRY : 0; +} + static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) { @@ -743,6 +777,14 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) goto out; } + if (i2c->high_mode) { + ret = i2c_pxa_send_mastercode(i2c); + if (ret) { + dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n"); + goto out; + } + } + spin_lock_irq(&i2c->lock); i2c->msg = msg; @@ -990,11 +1032,14 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) i2c_pxa_slave_txempty(i2c, isr); if (isr & ISR_IRF) i2c_pxa_slave_rxfull(i2c, isr); - } else if (i2c->msg) { + } else if (i2c->msg && (!i2c->highmode_enter)) { if (isr & ISR_ITE) i2c_pxa_irq_txempty(i2c, isr); if (isr & ISR_IRF) i2c_pxa_irq_rxfull(i2c, isr); + } else if ((isr & ISR_ITE) && i2c->highmode_enter) { + i2c->highmode_enter = false; + wake_up(&i2c->wait); } else { i2c_pxa_scream_blue_murder(i2c, "spurious irq"); } @@ -1072,20 +1117,25 @@ static int i2c_pxa_probe_pdata(struct platform_device *pdev, struct pxa_i2c *i2c, enum pxa_i2c_types *i2c_types) { - struct i2c_pxa_platform_data *plat = pdev->dev.platform_data; + struct i2c_pxa_platform_data *plat = dev_get_platdata(&pdev->dev); const struct platform_device_id *id = platform_get_device_id(pdev); *i2c_types = id->driver_data; if (plat) { i2c->use_pio = plat->use_pio; i2c->fast_mode = plat->fast_mode; + i2c->high_mode = plat->high_mode; + i2c->master_code = plat->master_code; + if (!i2c->master_code) + i2c->master_code = 0xe; + i2c->rate = plat->rate; } return 0; } static int i2c_pxa_probe(struct platform_device *dev) { - struct i2c_pxa_platform_data *plat = dev->dev.platform_data; + struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev); enum pxa_i2c_types i2c_type; struct pxa_i2c *i2c; struct resource *res = NULL; @@ -1151,6 +1201,7 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->irq = irq; i2c->slave_addr = I2C_PXA_SLAVE_ADDR; + i2c->highmode_enter = false; if (plat) { #ifdef CONFIG_I2C_PXA_SLAVE @@ -1160,6 +1211,16 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.class = plat->class; } + if (i2c->high_mode) { + if (i2c->rate) { + clk_set_rate(i2c->clk, i2c->rate); + pr_info("i2c: <%s> set rate to %ld\n", + i2c->adap.name, clk_get_rate(i2c->clk)); + } else + pr_warn("i2c: <%s> clock rate not set\n", + i2c->adap.name); + } + clk_prepare_enable(i2c->clk); if (i2c->use_pio) { @@ -1185,7 +1246,6 @@ static int i2c_pxa_probe(struct platform_device *dev) printk(KERN_INFO "I2C: Failed to add bus\n"); goto eadapt; } - of_i2c_register_devices(&i2c->adap); platform_set_drvdata(dev, i2c); diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 0fc585861610..d2fe11da5e82 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -101,6 +101,11 @@ enum { #define ID_ARBLOST (1 << 3) #define ID_NACK (1 << 4) +enum rcar_i2c_type { + I2C_RCAR_H1, + I2C_RCAR_H2, +}; + struct rcar_i2c_priv { void __iomem *io; struct i2c_adapter adap; @@ -113,6 +118,7 @@ struct rcar_i2c_priv { int irq; u32 icccr; u32 flags; + enum rcar_i2c_type devtype; }; #define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent) @@ -224,12 +230,25 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, u32 scgd, cdf; u32 round, ick; u32 scl; + u32 cdf_width; if (!clkp) { dev_err(dev, "there is no peripheral_clk\n"); return -EIO; } + switch (priv->devtype) { + case I2C_RCAR_H1: + cdf_width = 2; + break; + case I2C_RCAR_H2: + cdf_width = 3; + break; + default: + dev_err(dev, "device type error\n"); + return -EIO; + } + /* * calculate SCL clock * see @@ -245,7 +264,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, * clkp : peripheral_clk * F[] : integer up-valuation */ - for (cdf = 0; cdf < 4; cdf++) { + for (cdf = 0; cdf < (1 << cdf_width); cdf++) { ick = clk_get_rate(clkp) / (1 + cdf); if (ick < 20000000) goto ick_find; @@ -287,7 +306,7 @@ scgd_find: /* * keep icccr value */ - priv->icccr = (scgd << 2 | cdf); + priv->icccr = (scgd << (cdf_width) | cdf); return 0; } @@ -615,7 +634,7 @@ static const struct i2c_algorithm rcar_i2c_algo = { static int rcar_i2c_probe(struct platform_device *pdev) { - struct i2c_rcar_platform_data *pdata = pdev->dev.platform_data; + struct i2c_rcar_platform_data *pdata = dev_get_platdata(&pdev->dev); struct rcar_i2c_priv *priv; struct i2c_adapter *adap; struct resource *res; @@ -632,6 +651,9 @@ static int rcar_i2c_probe(struct platform_device *pdev) bus_speed = 100000; /* default 100 kHz */ if (pdata && pdata->bus_speed) bus_speed = pdata->bus_speed; + + priv->devtype = platform_get_device_id(pdev)->driver_data; + ret = rcar_i2c_clock_calculate(priv, bus_speed, dev); if (ret < 0) return ret; @@ -686,6 +708,14 @@ static int rcar_i2c_remove(struct platform_device *pdev) return 0; } +static struct platform_device_id rcar_i2c_id_table[] = { + { "i2c-rcar", I2C_RCAR_H1 }, + { "i2c-rcar_h1", I2C_RCAR_H1 }, + { "i2c-rcar_h2", I2C_RCAR_H2 }, + {}, +}; +MODULE_DEVICE_TABLE(platform, rcar_i2c_id_table); + static struct platform_driver rcar_i2c_driver = { .driver = { .name = "i2c-rcar", @@ -693,6 +723,7 @@ static struct platform_driver rcar_i2c_driver = { }, .probe = rcar_i2c_probe, .remove = rcar_i2c_remove, + .id_table = rcar_i2c_id_table, }; module_platform_driver(rcar_i2c_driver); diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index cab1c91b75a3..3535f3c0f7b4 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -36,7 +36,6 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/io.h> -#include <linux/of_i2c.h> #include <linux/of_gpio.h> #include <linux/pinctrl/consumer.h> @@ -1033,7 +1032,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) int ret; if (!pdev->dev.of_node) { - pdata = pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); if (!pdata) { dev_err(&pdev->dev, "no platform data\n"); return -EINVAL; @@ -1154,7 +1153,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) return ret; } - of_i2c_register_devices(&i2c->adap); platform_set_drvdata(pdev, i2c); pm_runtime_enable(&pdev->dev); diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c index 7c1ca5aca088..dd186a037684 100644 --- a/drivers/i2c/busses/i2c-s6000.c +++ b/drivers/i2c/busses/i2c-s6000.c @@ -290,8 +290,9 @@ static int s6i2c_probe(struct platform_device *dev) clock = 0; bus_num = -1; - if (dev->dev.platform_data) { - struct s6_i2c_platform_data *pdata = dev->dev.platform_data; + if (dev_get_platdata(&dev->dev)) { + struct s6_i2c_platform_data *pdata = + dev_get_platdata(&dev->dev); bus_num = pdata->bus_num; clock = pdata->clock; } diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c index 5351a2f34912..5e8f136e233f 100644 --- a/drivers/i2c/busses/i2c-sh7760.c +++ b/drivers/i2c/busses/i2c-sh7760.c @@ -437,7 +437,7 @@ static int sh7760_i2c_probe(struct platform_device *pdev) struct cami2c *id; int ret; - pd = pdev->dev.platform_data; + pd = dev_get_platdata(&pdev->dev); if (!pd) { dev_err(&pdev->dev, "no platform_data!\n"); ret = -ENODEV; diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index debf745c0268..55110ddbed1f 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -27,7 +27,6 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/i2c.h> -#include <linux/of_i2c.h> #include <linux/err.h> #include <linux/pm_runtime.h> #include <linux/clk.h> @@ -658,7 +657,7 @@ static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook) static int sh_mobile_i2c_probe(struct platform_device *dev) { - struct i2c_sh_mobile_platform_data *pdata = dev->dev.platform_data; + struct i2c_sh_mobile_platform_data *pdata = dev_get_platdata(&dev->dev); struct sh_mobile_i2c_data *pd; struct i2c_adapter *adap; struct resource *res; @@ -758,7 +757,6 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) "I2C adapter %d with bus speed %lu Hz (L/H=%x/%x)\n", adap->nr, pd->bus_speed, pd->iccl, pd->icch); - of_i2c_register_devices(adap); return 0; err_all: diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index a63c7d506836..6784f7f527a4 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -12,7 +12,6 @@ #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/of_i2c.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> @@ -65,6 +64,8 @@ #define SIRFSOC_I2C_START BIT(7) #define SIRFSOC_I2C_DEFAULT_SPEED 100000 +#define SIRFSOC_I2C_ERR_NOACK 1 +#define SIRFSOC_I2C_ERR_TIMEOUT 2 struct sirfsoc_i2c { void __iomem *base; @@ -143,14 +144,24 @@ static irqreturn_t i2c_sirfsoc_irq(int irq, void *dev_id) if (i2c_stat & SIRFSOC_I2C_STAT_ERR) { /* Error conditions */ - siic->err_status = 1; + siic->err_status = SIRFSOC_I2C_ERR_NOACK; writel(SIRFSOC_I2C_STAT_ERR, siic->base + SIRFSOC_I2C_STATUS); if (i2c_stat & SIRFSOC_I2C_STAT_NACK) - dev_err(&siic->adapter.dev, "ACK not received\n"); + dev_dbg(&siic->adapter.dev, "ACK not received\n"); else dev_err(&siic->adapter.dev, "I2C error\n"); + /* + * Due to hardware ANOMALY, we need to reset I2C earlier after + * we get NOACK while accessing non-existing clients, otherwise + * we will get errors even we access existing clients later + */ + writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET, + siic->base + SIRFSOC_I2C_CTRL); + while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) + cpu_relax(); + complete(&siic->done); } else if (i2c_stat & SIRFSOC_I2C_STAT_CMD_DONE) { /* CMD buffer execution complete */ @@ -183,6 +194,10 @@ static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic, if (msg->flags & I2C_M_RD) addr |= 1; + /* Reverse direction bit */ + if (msg->flags & I2C_M_REV_DIR_ADDR) + addr ^= 1; + writel(addr, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); } @@ -191,7 +206,6 @@ static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg) u32 regval = readl(siic->base + SIRFSOC_I2C_CTRL); /* timeout waiting for the xfer to finish or fail */ int timeout = msecs_to_jiffies((msg->len + 1) * 50); - int ret = 0; i2c_sirfsoc_set_address(siic, msg); @@ -200,7 +214,7 @@ static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg) i2c_sirfsoc_queue_cmd(siic); if (wait_for_completion_timeout(&siic->done, timeout) == 0) { - siic->err_status = 1; + siic->err_status = SIRFSOC_I2C_ERR_TIMEOUT; dev_err(&siic->adapter.dev, "Transfer timeout\n"); } @@ -208,16 +222,14 @@ static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg) siic->base + SIRFSOC_I2C_CTRL); writel(0, siic->base + SIRFSOC_I2C_CMD_START); - if (siic->err_status) { + /* i2c control doesn't response, reset it */ + if (siic->err_status == SIRFSOC_I2C_ERR_TIMEOUT) { writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) cpu_relax(); - - ret = -EIO; } - - return ret; + return siic->err_status ? -EAGAIN : 0; } static u32 i2c_sirfsoc_func(struct i2c_adapter *adap) @@ -321,6 +333,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) adap->algo = &i2c_sirfsoc_algo; adap->algo_data = siic; + adap->retries = 3; adap->dev.of_node = pdev->dev.of_node; adap->dev.parent = &pdev->dev; @@ -348,7 +361,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) if (bitrate < 100000) regval = - (2 * ctrl_speed) / (2 * bitrate * 11); + (2 * ctrl_speed) / (bitrate * 11); else regval = ctrl_speed / (bitrate * 5); @@ -366,8 +379,6 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev) clk_disable(clk); - of_i2c_register_devices(adap); - dev_info(&pdev->dev, " I2C adapter ready to operate\n"); return 0; @@ -416,6 +427,8 @@ static int i2c_sirfsoc_resume(struct device *dev) clk_enable(siic->clk); writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); + while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) + cpu_relax(); writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE, siic->base + SIRFSOC_I2C_CTRL); writel(siic->clk_div, siic->base + SIRFSOC_I2C_CLK_CTRL); diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index d1a6b204af00..f8f6f2e552db 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -17,7 +17,6 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/slab.h> -#include <linux/of_i2c.h> /* the name of this kernel module */ #define NAME "stu300" @@ -884,9 +883,6 @@ stu300_probe(struct platform_device *pdev) dev->pdev = pdev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENOENT; - dev->virtbase = devm_ioremap_resource(&pdev->dev, res); dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual " "base %p\n", bus_nr, dev->virtbase); @@ -936,12 +932,11 @@ stu300_probe(struct platform_device *pdev) platform_set_drvdata(pdev, dev); dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n", dev->virtbase, dev->irq); - of_i2c_register_devices(adap); return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int stu300_suspend(struct device *device) { struct stu300_dev *dev = dev_get_drvdata(device); diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 9aa1b60f7fdd..c457cb447c66 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -25,7 +25,6 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/slab.h> -#include <linux/of_i2c.h> #include <linux/of_device.h> #include <linux/module.h> #include <linux/clk/tegra.h> @@ -802,8 +801,6 @@ static int tegra_i2c_probe(struct platform_device *pdev) return ret; } - of_i2c_register_devices(&i2c_dev->adapter); - return 0; } diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c index 05106368d405..e7d3b755af3b 100644 --- a/drivers/i2c/busses/i2c-tiny-usb.c +++ b/drivers/i2c/busses/i2c-tiny-usb.c @@ -54,12 +54,16 @@ static int usb_write(struct i2c_adapter *adapter, int cmd, static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) { - unsigned char status; + unsigned char *pstatus; struct i2c_msg *pmsg; - int i; + int i, ret; dev_dbg(&adapter->dev, "master xfer %d messages:\n", num); + pstatus = kmalloc(sizeof(*pstatus), GFP_KERNEL); + if (!pstatus) + return -ENOMEM; + for (i = 0 ; i < num ; i++) { int cmd = CMD_I2C_IO; @@ -84,7 +88,8 @@ static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) pmsg->buf, pmsg->len) != pmsg->len) { dev_err(&adapter->dev, "failure reading data\n"); - return -EREMOTEIO; + ret = -EREMOTEIO; + goto out; } } else { /* write data */ @@ -93,36 +98,50 @@ static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) pmsg->buf, pmsg->len) != pmsg->len) { dev_err(&adapter->dev, "failure writing data\n"); - return -EREMOTEIO; + ret = -EREMOTEIO; + goto out; } } /* read status */ - if (usb_read(adapter, CMD_GET_STATUS, 0, 0, &status, 1) != 1) { + if (usb_read(adapter, CMD_GET_STATUS, 0, 0, pstatus, 1) != 1) { dev_err(&adapter->dev, "failure reading status\n"); - return -EREMOTEIO; + ret = -EREMOTEIO; + goto out; } - dev_dbg(&adapter->dev, " status = %d\n", status); - if (status == STATUS_ADDRESS_NAK) - return -EREMOTEIO; + dev_dbg(&adapter->dev, " status = %d\n", *pstatus); + if (*pstatus == STATUS_ADDRESS_NAK) { + ret = -EREMOTEIO; + goto out; + } } - return i; + ret = i; +out: + kfree(pstatus); + return ret; } static u32 usb_func(struct i2c_adapter *adapter) { - __le32 func; + __le32 *pfunc; + u32 ret; + + pfunc = kmalloc(sizeof(*pfunc), GFP_KERNEL); /* get functionality from adapter */ - if (usb_read(adapter, CMD_GET_FUNC, 0, 0, &func, sizeof(func)) != - sizeof(func)) { + if (!pfunc || usb_read(adapter, CMD_GET_FUNC, 0, 0, pfunc, + sizeof(*pfunc)) != sizeof(*pfunc)) { dev_err(&adapter->dev, "failure reading functionality\n"); - return 0; + ret = 0; + goto out; } - return le32_to_cpu(func); + ret = le32_to_cpup(pfunc); +out: + kfree(pfunc); + return ret; } /* This is the actual algorithm we define */ diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c index f3a8790a07e8..6bb3a89a440f 100644 --- a/drivers/i2c/busses/i2c-versatile.c +++ b/drivers/i2c/busses/i2c-versatile.c @@ -16,7 +16,6 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/io.h> -#include <linux/of_i2c.h> #define I2C_CONTROL 0x00 #define I2C_CONTROLS 0x00 @@ -108,7 +107,6 @@ static int i2c_versatile_probe(struct platform_device *dev) ret = i2c_bit_add_numbered_bus(&i2c->adap); if (ret >= 0) { platform_set_drvdata(dev, i2c); - of_i2c_register_devices(&i2c->adap); return 0; } diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c index baaa7d15b73e..c65da3d913a0 100644 --- a/drivers/i2c/busses/i2c-wmt.c +++ b/drivers/i2c/busses/i2c-wmt.c @@ -21,7 +21,6 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/of_i2c.h> #include <linux/of_irq.h> #include <linux/platform_device.h> @@ -439,8 +438,6 @@ static int wmt_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c_dev); - of_i2c_register_devices(adap); - return 0; } diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 3d0f0520c1b4..4c8b368d463b 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -40,7 +40,6 @@ #include <linux/i2c-xiic.h> #include <linux/io.h> #include <linux/slab.h> -#include <linux/of_i2c.h> #define DRIVER_NAME "xiic-i2c" @@ -703,7 +702,7 @@ static int xiic_i2c_probe(struct platform_device *pdev) if (irq < 0) goto resource_missing; - pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data; + pdata = (struct xiic_i2c_platform_data *)dev_get_platdata(&pdev->dev); i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); if (!i2c) @@ -752,8 +751,6 @@ static int xiic_i2c_probe(struct platform_device *pdev) i2c_new_device(&i2c->adap, pdata->devices + i); } - of_i2c_register_devices(&i2c->adap); - return 0; add_adapter_failed: diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index f32ca293ae0e..29d3f045a2bf 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -23,7 +23,11 @@ SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and Jean Delvare <khali@linux-fr.org> Mux support by Rodolfo Giometti <giometti@enneenne.com> and - Michael Lawnick <michael.lawnick.ext@nsn.com> */ + Michael Lawnick <michael.lawnick.ext@nsn.com> + OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de> + (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and + (c) 2013 Wolfram Sang <wsa@the-dreams.de> + */ #include <linux/module.h> #include <linux/kernel.h> @@ -35,7 +39,9 @@ #include <linux/init.h> #include <linux/idr.h> #include <linux/mutex.h> +#include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_irq.h> #include <linux/completion.h> #include <linux/hardirq.h> #include <linux/irqflags.h> @@ -954,6 +960,194 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter) up_read(&__i2c_board_lock); } +/* OF support code */ + +#if IS_ENABLED(CONFIG_OF) +static void of_i2c_register_devices(struct i2c_adapter *adap) +{ + void *result; + struct device_node *node; + + /* Only register child devices if the adapter has a node pointer set */ + if (!adap->dev.of_node) + return; + + dev_dbg(&adap->dev, "of_i2c: walking child nodes\n"); + + for_each_available_child_of_node(adap->dev.of_node, node) { + struct i2c_board_info info = {}; + struct dev_archdata dev_ad = {}; + const __be32 *addr; + int len; + + dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name); + + if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) { + dev_err(&adap->dev, "of_i2c: modalias failure on %s\n", + node->full_name); + continue; + } + + addr = of_get_property(node, "reg", &len); + if (!addr || (len < sizeof(int))) { + dev_err(&adap->dev, "of_i2c: invalid reg on %s\n", + node->full_name); + continue; + } + + info.addr = be32_to_cpup(addr); + if (info.addr > (1 << 10) - 1) { + dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", + info.addr, node->full_name); + continue; + } + + info.irq = irq_of_parse_and_map(node, 0); + info.of_node = of_node_get(node); + info.archdata = &dev_ad; + + if (of_get_property(node, "wakeup-source", NULL)) + info.flags |= I2C_CLIENT_WAKE; + + request_module("%s%s", I2C_MODULE_PREFIX, info.type); + + result = i2c_new_device(adap, &info); + if (result == NULL) { + dev_err(&adap->dev, "of_i2c: Failure registering %s\n", + node->full_name); + of_node_put(node); + irq_dispose_mapping(info.irq); + continue; + } + } +} + +static int of_dev_node_match(struct device *dev, void *data) +{ + return dev->of_node == data; +} + +/* must call put_device() when done with returned i2c_client device */ +struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) +{ + struct device *dev; + + dev = bus_find_device(&i2c_bus_type, NULL, node, + of_dev_node_match); + if (!dev) + return NULL; + + return i2c_verify_client(dev); +} +EXPORT_SYMBOL(of_find_i2c_device_by_node); + +/* must call put_device() when done with returned i2c_adapter device */ +struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) +{ + struct device *dev; + + dev = bus_find_device(&i2c_bus_type, NULL, node, + of_dev_node_match); + if (!dev) + return NULL; + + return i2c_verify_adapter(dev); +} +EXPORT_SYMBOL(of_find_i2c_adapter_by_node); +#else +static void of_i2c_register_devices(struct i2c_adapter *adap) { } +#endif /* CONFIG_OF */ + +/* ACPI support code */ + +#if IS_ENABLED(CONFIG_ACPI) +static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data) +{ + struct i2c_board_info *info = data; + + if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { + struct acpi_resource_i2c_serialbus *sb; + + sb = &ares->data.i2c_serial_bus; + if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) { + info->addr = sb->slave_address; + if (sb->access_mode == ACPI_I2C_10BIT_MODE) + info->flags |= I2C_CLIENT_TEN; + } + } else if (info->irq < 0) { + struct resource r; + + if (acpi_dev_resource_interrupt(ares, 0, &r)) + info->irq = r.start; + } + + /* Tell the ACPI core to skip this resource */ + return 1; +} + +static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, + void *data, void **return_value) +{ + struct i2c_adapter *adapter = data; + struct list_head resource_list; + struct i2c_board_info info; + struct acpi_device *adev; + int ret; + + if (acpi_bus_get_device(handle, &adev)) + return AE_OK; + if (acpi_bus_get_status(adev) || !adev->status.present) + return AE_OK; + + memset(&info, 0, sizeof(info)); + info.acpi_node.handle = handle; + info.irq = -1; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, + acpi_i2c_add_resource, &info); + acpi_dev_free_resource_list(&resource_list); + + if (ret < 0 || !info.addr) + return AE_OK; + + strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type)); + if (!i2c_new_device(adapter, &info)) { + dev_err(&adapter->dev, + "failed to add I2C device %s from ACPI\n", + dev_name(&adev->dev)); + } + + return AE_OK; +} + +/** + * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter + * @adap: pointer to adapter + * + * Enumerate all I2C slave devices behind this adapter by walking the ACPI + * namespace. When a device is found it will be added to the Linux device + * model and bound to the corresponding ACPI handle. + */ +static void acpi_i2c_register_devices(struct i2c_adapter *adap) +{ + acpi_handle handle; + acpi_status status; + + handle = ACPI_HANDLE(adap->dev.parent); + if (!handle) + return; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, + acpi_i2c_add_device, NULL, + adap, NULL); + if (ACPI_FAILURE(status)) + dev_warn(&adap->dev, "failed to enumerate I2C slaves\n"); +} +#else +static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {} +#endif /* CONFIG_ACPI */ + static int i2c_do_add_adapter(struct i2c_driver *driver, struct i2c_adapter *adap) { @@ -1058,6 +1252,9 @@ static int i2c_register_adapter(struct i2c_adapter *adap) exit_recovery: /* create pre-declared device nodes */ + of_i2c_register_devices(adap); + acpi_i2c_register_devices(adap); + if (adap->nr < __i2c_first_dynamic_bus_num) i2c_scan_static_board_info(adap); @@ -1282,7 +1479,6 @@ void i2c_del_adapter(struct i2c_adapter *adap) } EXPORT_SYMBOL(i2c_del_adapter); - /* ------------------------------------------------------------------------- */ int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *)) @@ -1665,7 +1861,8 @@ static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr) err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy); else { - dev_warn(&adap->dev, "No suitable probing method supported\n"); + dev_warn(&adap->dev, "No suitable probing method supported for address 0x%02X\n", + addr); err = -EOPNOTSUPP; } @@ -1825,7 +2022,8 @@ EXPORT_SYMBOL(i2c_get_adapter); void i2c_put_adapter(struct i2c_adapter *adap) { - module_put(adap->owner); + if (adap) + module_put(adap->owner); } EXPORT_SYMBOL(i2c_put_adapter); diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c index 7409ebb33c47..797e3117bef7 100644 --- a/drivers/i2c/i2c-mux.c +++ b/drivers/i2c/i2c-mux.c @@ -25,7 +25,6 @@ #include <linux/i2c.h> #include <linux/i2c-mux.h> #include <linux/of.h> -#include <linux/of_i2c.h> /* multiplexer per channel data */ struct i2c_mux_priv { @@ -185,8 +184,6 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent, dev_info(&parent->dev, "Added multiplexed i2c bus %d\n", i2c_adapter_id(&priv->adap)); - of_i2c_register_devices(&priv->adap); - return &priv->adap; } EXPORT_SYMBOL_GPL(i2c_add_mux_adapter); diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index 92cdd2323b03..44d4c6071c15 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -137,7 +137,7 @@ static irqreturn_t smbalert_irq(int irq, void *d) static int smbalert_probe(struct i2c_client *ara, const struct i2c_device_id *id) { - struct i2c_smbus_alert_setup *setup = ara->dev.platform_data; + struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev); struct i2c_smbus_alert *alert; struct i2c_adapter *adapter = ara->adapter; int res; diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c index 210b6f7b9028..74b41ae690f3 100644 --- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c +++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c @@ -21,7 +21,6 @@ #include <linux/i2c-mux.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/of_i2c.h> #include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/slab.h> @@ -131,7 +130,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) dev_err(dev, "Cannot find device tree node\n"); return -ENODEV; } - if (dev->platform_data) { + if (dev_get_platdata(dev)) { dev_err(dev, "Platform data is not supported\n"); return -EINVAL; } diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 5a0ce0081dce..5d4a99ba743e 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/gpio.h> -#include <linux/of_i2c.h> #include <linux/of_gpio.h> struct gpiomux { @@ -148,12 +147,14 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mux); - if (!pdev->dev.platform_data) { + if (!dev_get_platdata(&pdev->dev)) { ret = i2c_mux_gpio_probe_dt(mux, pdev); if (ret < 0) return ret; - } else - memcpy(&mux->data, pdev->dev.platform_data, sizeof(mux->data)); + } else { + memcpy(&mux->data, dev_get_platdata(&pdev->dev), + sizeof(mux->data)); + } /* * If a GPIO chip name is provided, the GPIO pin numbers provided are diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c index 966a18a5d12d..c4f08ad31183 100644 --- a/drivers/i2c/muxes/i2c-mux-pca9541.c +++ b/drivers/i2c/muxes/i2c-mux-pca9541.c @@ -324,7 +324,7 @@ static int pca9541_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adap = client->adapter; - struct pca954x_platform_data *pdata = client->dev.platform_data; + struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev); struct pca9541 *data; int force; int ret = -ENODEV; diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index a531d801dbe4..bad5b84a5985 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -185,7 +185,7 @@ static int pca954x_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); - struct pca954x_platform_data *pdata = client->dev.platform_data; + struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev); int num, force, class; struct pca954x *data; int ret = -ENODEV; diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index a43c0ce5e3d8..69a91732ae65 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -20,7 +20,6 @@ #include <linux/i2c-mux.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/of_i2c.h> #include <linux/pinctrl/consumer.h> #include <linux/i2c-mux-pinctrl.h> #include <linux/platform_device.h> @@ -145,7 +144,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev) mux->dev = &pdev->dev; - mux->pdata = pdev->dev.platform_data; + mux->pdata = dev_get_platdata(&pdev->dev); if (!mux->pdata) { ret = i2c_mux_pinctrl_parse_dt(mux, pdev); if (ret < 0) diff --git a/drivers/media/platform/exynos4-is/fimc-is-i2c.c b/drivers/media/platform/exynos4-is/fimc-is-i2c.c index 617a798d9235..993055605214 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-i2c.c +++ b/drivers/media/platform/exynos4-is/fimc-is-i2c.c @@ -12,7 +12,7 @@ #include <linux/clk.h> #include <linux/module.h> -#include <linux/of_i2c.h> +#include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/slab.h> @@ -67,8 +67,6 @@ static int fimc_is_i2c_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); pm_runtime_enable(&i2c_adap->dev); - of_i2c_register_devices(i2c_adap); - return 0; } diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 967f6a939340..2276fdc213c5 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -21,7 +21,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_i2c.h> +#include <linux/i2c.h> #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/of_platform.h> diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c index 19f556c5957f..f8c66b434fd6 100644 --- a/drivers/media/platform/exynos4-is/media-dev.c +++ b/drivers/media/platform/exynos4-is/media-dev.c @@ -20,7 +20,6 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/of_device.h> -#include <linux/of_i2c.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/types.h> diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 80e5c13b930d..78cc76053328 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -48,12 +48,6 @@ config OF_IRQ def_bool y depends on !SPARC -config OF_I2C - def_tristate I2C - depends on I2C - help - OpenFirmware I2C accessors - config OF_NET depends on NETDEVICES def_bool y diff --git a/drivers/of/Makefile b/drivers/of/Makefile index 1f9c0c492ef9..efd05102c405 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -3,7 +3,6 @@ obj-$(CONFIG_OF_FLATTREE) += fdt.o obj-$(CONFIG_OF_PROMTREE) += pdt.o obj-$(CONFIG_OF_ADDRESS) += address.o obj-$(CONFIG_OF_IRQ) += irq.o -obj-$(CONFIG_OF_I2C) += of_i2c.o obj-$(CONFIG_OF_NET) += of_net.o obj-$(CONFIG_OF_SELFTEST) += selftest.o obj-$(CONFIG_OF_MDIO) += of_mdio.o diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c deleted file mode 100644 index b667264222cc..000000000000 --- a/drivers/of/of_i2c.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * OF helpers for the I2C API - * - * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de> - * - * Based on a previous patch from Jon Smirl <jonsmirl@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/i2c.h> -#include <linux/irq.h> -#include <linux/of.h> -#include <linux/of_i2c.h> -#include <linux/of_irq.h> -#include <linux/module.h> - -void of_i2c_register_devices(struct i2c_adapter *adap) -{ - void *result; - struct device_node *node; - - /* Only register child devices if the adapter has a node pointer set */ - if (!adap->dev.of_node) - return; - - dev_dbg(&adap->dev, "of_i2c: walking child nodes\n"); - - for_each_available_child_of_node(adap->dev.of_node, node) { - struct i2c_board_info info = {}; - struct dev_archdata dev_ad = {}; - const __be32 *addr; - int len; - - dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name); - - if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) { - dev_err(&adap->dev, "of_i2c: modalias failure on %s\n", - node->full_name); - continue; - } - - addr = of_get_property(node, "reg", &len); - if (!addr || (len < sizeof(int))) { - dev_err(&adap->dev, "of_i2c: invalid reg on %s\n", - node->full_name); - continue; - } - - info.addr = be32_to_cpup(addr); - if (info.addr > (1 << 10) - 1) { - dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", - info.addr, node->full_name); - continue; - } - - info.irq = irq_of_parse_and_map(node, 0); - info.of_node = of_node_get(node); - info.archdata = &dev_ad; - - if (of_get_property(node, "wakeup-source", NULL)) - info.flags |= I2C_CLIENT_WAKE; - - request_module("%s%s", I2C_MODULE_PREFIX, info.type); - - result = i2c_new_device(adap, &info); - if (result == NULL) { - dev_err(&adap->dev, "of_i2c: Failure registering %s\n", - node->full_name); - of_node_put(node); - irq_dispose_mapping(info.irq); - continue; - } - } -} -EXPORT_SYMBOL(of_i2c_register_devices); - -static int of_dev_node_match(struct device *dev, void *data) -{ - return dev->of_node == data; -} - -/* must call put_device() when done with returned i2c_client device */ -struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) -{ - struct device *dev; - - dev = bus_find_device(&i2c_bus_type, NULL, node, - of_dev_node_match); - if (!dev) - return NULL; - - return i2c_verify_client(dev); -} -EXPORT_SYMBOL(of_find_i2c_device_by_node); - -/* must call put_device() when done with returned i2c_adapter device */ -struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) -{ - struct device *dev; - - dev = bus_find_device(&i2c_bus_type, NULL, node, - of_dev_node_match); - if (!dev) - return NULL; - - return i2c_verify_adapter(dev); -} -EXPORT_SYMBOL(of_find_i2c_adapter_by_node); - -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/imx-drm/imx-tve.c b/drivers/staging/imx-drm/imx-tve.c index 3c024b40b4f8..33d6525cf996 100644 --- a/drivers/staging/imx-drm/imx-tve.c +++ b/drivers/staging/imx-drm/imx-tve.c @@ -21,7 +21,7 @@ #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/module.h> -#include <linux/of_i2c.h> +#include <linux/i2c.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/spinlock.h> |