1159 files changed, 61607 insertions, 50733 deletions

diff --git a/drivers/Kconfig b/drivers/Kconfig
index d236aef7e59f..bfc918633fd9 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -140,4 +140,12 @@ source "drivers/virt/Kconfig"
 
 source "drivers/devfreq/Kconfig"
 
+source "drivers/extcon/Kconfig"
+
+source "drivers/memory/Kconfig"
+
+source "drivers/iio/Kconfig"
+
+source "drivers/vme/Kconfig"
+
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 95952c82bf16..35d5181c8ef2 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -134,3 +134,7 @@ obj-$(CONFIG_VIRT_DRIVERS)	+= virt/
 obj-$(CONFIG_HYPERV)		+= hv/
 
 obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/
+obj-$(CONFIG_EXTCON)		+= extcon/
+obj-$(CONFIG_MEMORY)		+= memory/
+obj-$(CONFIG_IIO)		+= iio/
+obj-$(CONFIG_VME_BUS)		+= vme/
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 29a4a5c8ee00..1564e0927c21 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -69,6 +69,7 @@ static struct acpi_bus_type *acpi_get_bus_type(struct bus_type *type)
 	up_read(&bus_type_sem);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(register_acpi_bus_type);
 
 static int acpi_find_bridge_device(struct device *dev, acpi_handle * handle)
 {
@@ -85,6 +86,7 @@ static int acpi_find_bridge_device(struct device *dev, acpi_handle * handle)
 	up_read(&bus_type_sem);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(unregister_acpi_bus_type);
 
 /* Get device's handler per its address under its parent */
 struct acpi_find_child {
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 4a29763b8eb4..a12808259dfb 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -720,21 +720,21 @@ static int acpi_pci_link_add(struct acpi_device *device)
 	       acpi_device_bid(device));
 	for (i = 0; i < link->irq.possible_count; i++) {
 		if (link->irq.active == link->irq.possible[i]) {
-			printk(" *%d", link->irq.possible[i]);
+			printk(KERN_CONT " *%d", link->irq.possible[i]);
 			found = 1;
 		} else
-			printk(" %d", link->irq.possible[i]);
+			printk(KERN_CONT " %d", link->irq.possible[i]);
 	}
 
-	printk(")");
+	printk(KERN_CONT ")");
 
 	if (!found)
-		printk(" *%d", link->irq.active);
+		printk(KERN_CONT " *%d", link->irq.active);
 
 	if (!link->device->status.enabled)
-		printk(", disabled.");
+		printk(KERN_CONT ", disabled.");
 
-	printk("\n");
+	printk(KERN_CONT "\n");
 
 	list_add_tail(&link->list, &acpi_link_list);
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index eb6fd233764b..06527c526618 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -887,7 +887,7 @@ int __init acpi_sleep_init(void)
 		status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 		if (ACPI_SUCCESS(status)) {
 			sleep_states[i] = 1;
-			printk(" S%d", i);
+			printk(KERN_CONT " S%d", i);
 		}
 	}
 
@@ -901,7 +901,7 @@ int __init acpi_sleep_init(void)
 		hibernation_set_ops(old_suspend_ordering ?
 			&acpi_hibernation_ops_old : &acpi_hibernation_ops);
 		sleep_states[ACPI_STATE_S4] = 1;
-		printk(" S4");
+		printk(KERN_CONT " S4");
 		if (!nosigcheck) {
 			acpi_get_table(ACPI_SIG_FACS, 1,
 				(struct acpi_table_header **)&facs);
@@ -914,11 +914,11 @@ int __init acpi_sleep_init(void)
 	status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 	if (ACPI_SUCCESS(status)) {
 		sleep_states[ACPI_STATE_S5] = 1;
-		printk(" S5");
+		printk(KERN_CONT " S5");
 		pm_power_off_prepare = acpi_power_off_prepare;
 		pm_power_off = acpi_power_off;
 	}
-	printk(")\n");
+	printk(KERN_CONT ")\n");
 	/*
 	 * Register the tts_notifier to reboot notifier list so that the _TTS
 	 * object can also be evaluated when the system enters S5.
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index b002a471c5d4..adbbc1c80a26 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -382,3 +382,33 @@ acpi_evaluate_reference(acpi_handle handle,
 }
 
 EXPORT_SYMBOL(acpi_evaluate_reference);
+
+acpi_status
+acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld *pld)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *output;
+
+	status = acpi_evaluate_object(handle, "_PLD", NULL, &buffer);
+
+	if (ACPI_FAILURE(status))
+		return status;
+
+	output = buffer.pointer;
+
+	if (!output || output->type != ACPI_TYPE_PACKAGE
+	    || !output->package.count
+	    || output->package.elements[0].type != ACPI_TYPE_BUFFER
+	    || output->package.elements[0].buffer.length > sizeof(*pld)) {
+		status = AE_TYPE;
+		goto out;
+	}
+
+	memcpy(pld, output->package.elements[0].buffer.pointer,
+	       output->package.elements[0].buffer.length);
+out:
+	kfree(buffer.pointer);
+	return status;
+}
+EXPORT_SYMBOL(acpi_get_physical_device_location);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 26a06b801b5b..2bcef657a60c 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -21,8 +21,7 @@
 #include "power/power.h"
 
 /* /sys/devices/system */
-/* FIXME: make static after drivers/base/sys.c is deleted */
-struct kset *system_kset;
+static struct kset *system_kset;
 
 #define to_bus_attr(_attr) container_of(_attr, struct bus_attribute, attr)
 
diff --git a/drivers/base/core.c b/drivers/base/core.c
index e28ce9898af4..346be8b78b24 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -25,6 +25,7 @@
 #include <linux/mutex.h>
 #include <linux/async.h>
 #include <linux/pm_runtime.h>
+#include <linux/netdevice.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -65,7 +66,7 @@ static inline int device_is_not_partition(struct device *dev)
  * @dev: struct device to get the name of
  *
  * Will return the device's driver's name if it is bound to a device.  If
- * the device is not bound to a device, it will return the name of the bus
+ * the device is not bound to a driver, it will return the name of the bus
  * it is attached to.  If it is not attached to a bus either, an empty
  * string will be returned.
  */
@@ -878,8 +879,8 @@ EXPORT_SYMBOL_GPL(dev_set_name);
  * to NULL prevents an entry from being created.  class->dev_kobj must
  * be set (or cleared) before any devices are registered to the class
  * otherwise device_create_sys_dev_entry() and
- * device_remove_sys_dev_entry() will disagree about the the presence
- * of the link.
+ * device_remove_sys_dev_entry() will disagree about the presence of
+ * the link.
  */
 static struct kobject *device_to_dev_kobj(struct device *dev)
 {
@@ -1843,15 +1844,60 @@ void device_shutdown(void)
  */
 
 #ifdef CONFIG_PRINTK
-
 int __dev_printk(const char *level, const struct device *dev,
 		 struct va_format *vaf)
 {
+	char dict[128];
+	size_t dictlen = 0;
+	const char *subsys;
+
 	if (!dev)
 		return printk("%s(NULL device *): %pV", level, vaf);
 
-	return printk("%s%s %s: %pV",
-		      level, dev_driver_string(dev), dev_name(dev), vaf);
+	if (dev->class)
+		subsys = dev->class->name;
+	else if (dev->bus)
+		subsys = dev->bus->name;
+	else
+		goto skip;
+
+	dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+			    "SUBSYSTEM=%s", subsys);
+
+	/*
+	 * Add device identifier DEVICE=:
+	 *   b12:8         block dev_t
+	 *   c127:3        char dev_t
+	 *   n8            netdev ifindex
+	 *   +sound:card0  subsystem:devname
+	 */
+	if (MAJOR(dev->devt)) {
+		char c;
+
+		if (strcmp(subsys, "block") == 0)
+			c = 'b';
+		else
+			c = 'c';
+		dictlen++;
+		dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+				   "DEVICE=%c%u:%u",
+				   c, MAJOR(dev->devt), MINOR(dev->devt));
+	} else if (strcmp(subsys, "net") == 0) {
+		struct net_device *net = to_net_dev(dev);
+
+		dictlen++;
+		dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+				    "DEVICE=n%u", net->ifindex);
+	} else {
+		dictlen++;
+		dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+				    "DEVICE=+%s:%s", subsys, dev_name(dev));
+	}
+skip:
+	return printk_emit(0, level[1] - '0',
+			   dictlen ? dict : NULL, dictlen,
+			   "%s %s: %pV",
+			   dev_driver_string(dev), dev_name(dev), vaf);
 }
 EXPORT_SYMBOL(__dev_printk);
 
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index adf937bf4091..63452943abd1 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -330,8 +330,4 @@ void __init cpu_dev_init(void)
 		panic("Failed to register CPU subsystem");
 
 	cpu_dev_register_generic();
-
-#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
-	sched_create_sysfs_power_savings_entries(cpu_subsys.dev_root);
-#endif
 }
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index 524bf96c289f..2360adb7a58f 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -309,6 +309,10 @@ EXPORT_SYMBOL_GPL(devres_remove);
  * which @match returns 1.  If @match is NULL, it's considered to
  * match all.  If found, the resource is removed atomically and freed.
  *
+ * Note that the release function for the resource will not be called,
+ * only the devres-allocated data will be freed.  The caller becomes
+ * responsible for freeing any other data.
+ *
  * RETURNS:
  * 0 if devres is found and freed, -ENOENT if not found.
  */
@@ -326,6 +330,37 @@ int devres_destroy(struct device *dev, dr_release_t release,
 }
 EXPORT_SYMBOL_GPL(devres_destroy);
 
+
+/**
+ * devres_release - Find a device resource and destroy it, calling release
+ * @dev: Device to find resource from
+ * @release: Look for resources associated with this release function
+ * @match: Match function (optional)
+ * @match_data: Data for the match function
+ *
+ * Find the latest devres of @dev associated with @release and for
+ * which @match returns 1.  If @match is NULL, it's considered to
+ * match all.  If found, the resource is removed atomically, the
+ * release function called and the resource freed.
+ *
+ * RETURNS:
+ * 0 if devres is found and freed, -ENOENT if not found.
+ */
+int devres_release(struct device *dev, dr_release_t release,
+		   dr_match_t match, void *match_data)
+{
+	void *res;
+
+	res = devres_remove(dev, release, match, match_data);
+	if (unlikely(!res))
+		return -ENOENT;
+
+	(*release)(dev, res);
+	devres_free(res);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devres_release);
+
 static int remove_nodes(struct device *dev,
 			struct list_head *first, struct list_head *end,
 			struct list_head *todo)
diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 8493536ea55b..765c3a28077a 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -7,9 +7,9 @@
  * devtmpfs, a tmpfs-based filesystem is created. Every driver-core
  * device which requests a device node, will add a node in this
  * filesystem.
- * By default, all devices are named after the the name of the
- * device, owned by root and have a default mode of 0600. Subsystems
- * can overwrite the default setting if needed.
+ * By default, all devices are named after the name of the device,
+ * owned by root and have a default mode of 0600. Subsystems can
+ * overwrite the default setting if needed.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c
index 07cbbc6fddb4..05c64c11bad2 100644
--- a/drivers/base/dma-buf.c
+++ b/drivers/base/dma-buf.c
@@ -293,7 +293,7 @@ EXPORT_SYMBOL_GPL(dma_buf_unmap_attachment);
  * cpu in the kernel context. Calls begin_cpu_access to allow exporter-specific
  * preparations. Coherency is only guaranteed in the specified range for the
  * specified access direction.
- * @dma_buf:	[in]	buffer to prepare cpu access for.
+ * @dmabuf:	[in]	buffer to prepare cpu access for.
  * @start:	[in]	start of range for cpu access.
  * @len:	[in]	length of range for cpu access.
  * @direction:	[in]	length of range for cpu access.
@@ -320,7 +320,7 @@ EXPORT_SYMBOL_GPL(dma_buf_begin_cpu_access);
  * cpu in the kernel context. Calls end_cpu_access to allow exporter-specific
  * actions. Coherency is only guaranteed in the specified range for the
  * specified access direction.
- * @dma_buf:	[in]	buffer to complete cpu access for.
+ * @dmabuf:	[in]	buffer to complete cpu access for.
  * @start:	[in]	start of range for cpu access.
  * @len:	[in]	length of range for cpu access.
  * @direction:	[in]	length of range for cpu access.
@@ -340,7 +340,7 @@ EXPORT_SYMBOL_GPL(dma_buf_end_cpu_access);
 /**
  * dma_buf_kmap_atomic - Map a page of the buffer object into kernel address
  * space. The same restrictions as for kmap_atomic and friends apply.
- * @dma_buf:	[in]	buffer to map page from.
+ * @dmabuf:	[in]	buffer to map page from.
  * @page_num:	[in]	page in PAGE_SIZE units to map.
  *
  * This call must always succeed, any necessary preparations that might fail
@@ -356,7 +356,7 @@ EXPORT_SYMBOL_GPL(dma_buf_kmap_atomic);
 
 /**
  * dma_buf_kunmap_atomic - Unmap a page obtained by dma_buf_kmap_atomic.
- * @dma_buf:	[in]	buffer to unmap page from.
+ * @dmabuf:	[in]	buffer to unmap page from.
  * @page_num:	[in]	page in PAGE_SIZE units to unmap.
  * @vaddr:	[in]	kernel space pointer obtained from dma_buf_kmap_atomic.
  *
@@ -375,7 +375,7 @@ EXPORT_SYMBOL_GPL(dma_buf_kunmap_atomic);
 /**
  * dma_buf_kmap - Map a page of the buffer object into kernel address space. The
  * same restrictions as for kmap and friends apply.
- * @dma_buf:	[in]	buffer to map page from.
+ * @dmabuf:	[in]	buffer to map page from.
  * @page_num:	[in]	page in PAGE_SIZE units to map.
  *
  * This call must always succeed, any necessary preparations that might fail
@@ -391,7 +391,7 @@ EXPORT_SYMBOL_GPL(dma_buf_kmap);
 
 /**
  * dma_buf_kunmap - Unmap a page obtained by dma_buf_kmap.
- * @dma_buf:	[in]	buffer to unmap page from.
+ * @dmabuf:	[in]	buffer to unmap page from.
  * @page_num:	[in]	page in PAGE_SIZE units to unmap.
  * @vaddr:	[in]	kernel space pointer obtained from dma_buf_kmap.
  *
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 3ec3896c83a6..207c27ddf828 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -80,7 +80,7 @@ struct device *driver_find_device(struct device_driver *drv,
 	struct klist_iter i;
 	struct device *dev;
 
-	if (!drv)
+	if (!drv || !drv->p)
 		return NULL;
 
 	klist_iter_init_node(&drv->p->klist_devices, &i,
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
index f94cccccfa56..3bea7fe25b20 100644
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -297,6 +297,23 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
 			return -EILSEQ;
 	}
 
+	/* First Slave Address Descriptor should be port 0:
+	 * the main register space for the core
+	 */
+	tmp = bcma_erom_get_addr_desc(bus, eromptr, SCAN_ADDR_TYPE_SLAVE, 0);
+	if (tmp <= 0) {
+		/* Try again to see if it is a bridge */
+		tmp = bcma_erom_get_addr_desc(bus, eromptr,
+					      SCAN_ADDR_TYPE_BRIDGE, 0);
+		if (tmp <= 0) {
+			return -EILSEQ;
+		} else {
+			pr_info("Bridge found\n");
+			return -ENXIO;
+		}
+	}
+	core->addr = tmp;
+
 	/* get & parse slave ports */
 	for (i = 0; i < ports[1]; i++) {
 		for (j = 0; ; j++) {
@@ -309,7 +326,7 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
 				break;
 			} else {
 				if (i == 0 && j == 0)
-					core->addr = tmp;
+					core->addr1 = tmp;
 			}
 		}
 	}
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 57fd867553d7..2812b152d6e9 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -439,6 +439,7 @@ static struct usb_driver ath3k_driver = {
 	.probe		= ath3k_probe,
 	.disconnect	= ath3k_disconnect,
 	.id_table	= ath3k_table,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(ath3k_driver);
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
index 1e742a50e2cd..37ae175162f3 100644
--- a/drivers/bluetooth/bcm203x.c
+++ b/drivers/bluetooth/bcm203x.c
@@ -279,6 +279,7 @@ static struct usb_driver bcm203x_driver = {
 	.probe		= bcm203x_probe,
 	.disconnect	= bcm203x_disconnect,
 	.id_table	= bcm203x_table,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(bcm203x_driver);
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
index b8ac1c549a1c..32e825144fe9 100644
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -749,6 +749,7 @@ static struct usb_driver bfusb_driver = {
 	.probe		= bfusb_probe,
 	.disconnect	= bfusb_disconnect,
 	.id_table	= bfusb_table,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(bfusb_driver);
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index d894340a7601..609861a53c28 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -508,6 +508,7 @@ static struct usb_driver bpa10x_driver = {
 	.probe		= bpa10x_probe,
 	.disconnect	= bpa10x_disconnect,
 	.id_table	= bpa10x_table,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(bpa10x_driver);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 9217121362e1..461c68bc4dd7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1218,6 +1218,7 @@ static struct usb_driver btusb_driver = {
 #endif
 	.id_table	= btusb_table,
 	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(btusb_driver);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index ee946865d6cb..ea6f6325f9ba 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -585,14 +585,6 @@ config DEVPORT
 
 source "drivers/s390/char/Kconfig"
 
-config RAMOOPS
-	tristate "Log panic/oops to a RAM buffer"
-	depends on HAS_IOMEM
-	default n
-	help
-	  This enables panic and oops messages to be logged to a circular
-	  buffer in RAM where it can be read back at some later point.
-
 config MSM_SMD_PKT
 	bool "Enable device interface for some SMD packet ports"
 	default n
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 0dc5d7ce4864..d0b27a39f1d4 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -58,7 +58,6 @@ obj-$(CONFIG_HANGCHECK_TIMER)	+= hangcheck-timer.o
 obj-$(CONFIG_TCG_TPM)		+= tpm/
 
 obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
-obj-$(CONFIG_RAMOOPS)		+= ramoops.o
 
 obj-$(CONFIG_JS_RTC)		+= js-rtc.o
 js-rtc-y = rtc.o
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index b2402eb076c7..c225314468ee 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -250,3 +250,16 @@ config UML_RANDOM
 	  (check your distro, or download from
 	  http://sourceforge.net/projects/gkernel/).  rngd periodically reads
 	  /dev/hwrng and injects the entropy into /dev/random.
+
+config HW_RANDOM_PSERIES
+	tristate "pSeries HW Random Number Generator support"
+	depends on HW_RANDOM && PPC64 && IBMVIO
+	default HW_RANDOM
+	---help---
+	  This driver provides kernel-side support for the Random Number
+	  Generator hardware found on POWER7+ machines and above
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pseries-rng.
+
+	  If unsure, say Y.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index b2ff5265a996..d901dfa30321 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o
 obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o
 obj-$(CONFIG_HW_RANDOM_PICOXCELL) += picoxcell-rng.o
 obj-$(CONFIG_HW_RANDOM_PPC4XX) += ppc4xx-rng.o
+obj-$(CONFIG_HW_RANDOM_PSERIES) += pseries-rng.o
diff --git a/drivers/char/hw_random/pseries-rng.c b/drivers/char/hw_random/pseries-rng.c
new file mode 100644
index 000000000000..5f1197929f0c
--- /dev/null
+++ b/drivers/char/hw_random/pseries-rng.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2010 Michael Neuling IBM Corporation
+ *
+ * Driver for the pseries hardware RNG for POWER7+ and above
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/hw_random.h>
+#include <asm/vio.h>
+
+#define MODULE_NAME "pseries-rng"
+
+static int pseries_rng_data_read(struct hwrng *rng, u32 *data)
+{
+	if (plpar_hcall(H_RANDOM, (unsigned long *)data) != H_SUCCESS) {
+		printk(KERN_ERR "pseries rng hcall error\n");
+		return 0;
+	}
+	return 8;
+}
+
+/**
+ * pseries_rng_get_desired_dma - Return desired DMA allocate for CMO operations
+ *
+ * This is a required function for a driver to operate in a CMO environment
+ * but this device does not make use of DMA allocations, return 0.
+ *
+ * Return value:
+ *	Number of bytes of IO data the driver will need to perform well -> 0
+ */
+static unsigned long pseries_rng_get_desired_dma(struct vio_dev *vdev)
+{
+	return 0;
+};
+
+static struct hwrng pseries_rng = {
+	.name		= MODULE_NAME,
+	.data_read	= pseries_rng_data_read,
+};
+
+static int __init pseries_rng_probe(struct vio_dev *dev,
+		const struct vio_device_id *id)
+{
+	return hwrng_register(&pseries_rng);
+}
+
+static int __exit pseries_rng_remove(struct vio_dev *dev)
+{
+	hwrng_unregister(&pseries_rng);
+	return 0;
+}
+
+static struct vio_device_id pseries_rng_driver_ids[] = {
+	{ "ibm,random-v1", "ibm,random"},
+	{ "", "" }
+};
+MODULE_DEVICE_TABLE(vio, pseries_rng_driver_ids);
+
+static struct vio_driver pseries_rng_driver = {
+	.name = MODULE_NAME,
+	.probe = pseries_rng_probe,
+	.remove = pseries_rng_remove,
+	.get_desired_dma = pseries_rng_get_desired_dma,
+	.id_table = pseries_rng_driver_ids
+};
+
+static int __init rng_init(void)
+{
+	printk(KERN_INFO "Registering IBM pSeries RNG driver\n");
+	return vio_register_driver(&pseries_rng_driver);
+}
+
+module_init(rng_init);
+
+static void __exit rng_exit(void)
+{
+	vio_unregister_driver(&pseries_rng_driver);
+}
+module_exit(rng_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Neuling <mikey@neuling.org>");
+MODULE_DESCRIPTION("H/W RNG driver for IBM pSeries processors");
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index d6e9d081c8b1..67c3371723cc 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -807,44 +807,6 @@ static const struct file_operations oldmem_fops = {
 };
 #endif
 
-static ssize_t kmsg_writev(struct kiocb *iocb, const struct iovec *iv,
-			   unsigned long count, loff_t pos)
-{
-	char *line, *p;
-	int i;
-	ssize_t ret = -EFAULT;
-	size_t len = iov_length(iv, count);
-
-	line = kmalloc(len + 1, GFP_KERNEL);
-	if (line == NULL)
-		return -ENOMEM;
-
-	/*
-	 * copy all vectors into a single string, to ensure we do
-	 * not interleave our log line with other printk calls
-	 */
-	p = line;
-	for (i = 0; i < count; i++) {
-		if (copy_from_user(p, iv[i].iov_base, iv[i].iov_len))
-			goto out;
-		p += iv[i].iov_len;
-	}
-	p[0] = '\0';
-
-	ret = printk("%s", line);
-	/* printk can add a prefix */
-	if (ret > len)
-		ret = len;
-out:
-	kfree(line);
-	return ret;
-}
-
-static const struct file_operations kmsg_fops = {
-	.aio_write = kmsg_writev,
-	.llseek = noop_llseek,
-};
-
 static const struct memdev {
 	const char *name;
 	umode_t mode;
@@ -863,7 +825,9 @@ static const struct memdev {
 	 [7] = { "full", 0666, &full_fops, NULL },
 	 [8] = { "random", 0666, &random_fops, NULL },
 	 [9] = { "urandom", 0666, &urandom_fops, NULL },
-	[11] = { "kmsg", 0, &kmsg_fops, NULL },
+#ifdef CONFIG_PRINTK
+	[11] = { "kmsg", 0644, &kmsg_fops, NULL },
+#endif
 #ifdef CONFIG_CRASH_DUMP
 	[12] = { "oldmem", 0, &oldmem_fops, NULL },
 #endif
diff --git a/drivers/char/ramoops.c b/drivers/char/ramoops.c
deleted file mode 100644
index 2a5e45d2a9f8..000000000000
--- a/drivers/char/ramoops.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * RAM Oops/Panic logger
- *
- * Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/kmsg_dump.h>
-#include <linux/time.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/ramoops.h>
-
-#define RAMOOPS_KERNMSG_HDR "===="
-#define MIN_MEM_SIZE 4096UL
-
-static ulong record_size = MIN_MEM_SIZE;
-module_param(record_size, ulong, 0400);
-MODULE_PARM_DESC(record_size,
-		"size of each dump done on oops/panic");
-
-static ulong mem_address;
-module_param(mem_address, ulong, 0400);
-MODULE_PARM_DESC(mem_address,
-		"start of reserved RAM used to store oops/panic logs");
-
-static ulong mem_size;
-module_param(mem_size, ulong, 0400);
-MODULE_PARM_DESC(mem_size,
-		"size of reserved RAM used to store oops/panic logs");
-
-static int dump_oops = 1;
-module_param(dump_oops, int, 0600);
-MODULE_PARM_DESC(dump_oops,
-		"set to 1 to dump oopses, 0 to only dump panics (default 1)");
-
-static struct ramoops_context {
-	struct kmsg_dumper dump;
-	void *virt_addr;
-	phys_addr_t phys_addr;
-	unsigned long size;
-	unsigned long record_size;
-	int dump_oops;
-	int count;
-	int max_count;
-} oops_cxt;
-
-static struct platform_device *dummy;
-static struct ramoops_platform_data *dummy_data;
-
-static void ramoops_do_dump(struct kmsg_dumper *dumper,
-		enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
-		const char *s2, unsigned long l2)
-{
-	struct ramoops_context *cxt = container_of(dumper,
-			struct ramoops_context, dump);
-	unsigned long s1_start, s2_start;
-	unsigned long l1_cpy, l2_cpy;
-	int res, hdr_size;
-	char *buf, *buf_orig;
-	struct timeval timestamp;
-
-	if (reason != KMSG_DUMP_OOPS &&
-	    reason != KMSG_DUMP_PANIC)
-		return;
-
-	/* Only dump oopses if dump_oops is set */
-	if (reason == KMSG_DUMP_OOPS && !cxt->dump_oops)
-		return;
-
-	buf = cxt->virt_addr + (cxt->count * cxt->record_size);
-	buf_orig = buf;
-
-	memset(buf, '\0', cxt->record_size);
-	res = sprintf(buf, "%s", RAMOOPS_KERNMSG_HDR);
-	buf += res;
-	do_gettimeofday(&timestamp);
-	res = sprintf(buf, "%lu.%lu\n", (long)timestamp.tv_sec, (long)timestamp.tv_usec);
-	buf += res;
-
-	hdr_size = buf - buf_orig;
-	l2_cpy = min(l2, cxt->record_size - hdr_size);
-	l1_cpy = min(l1, cxt->record_size - hdr_size - l2_cpy);
-
-	s2_start = l2 - l2_cpy;
-	s1_start = l1 - l1_cpy;
-
-	memcpy(buf, s1 + s1_start, l1_cpy);
-	memcpy(buf + l1_cpy, s2 + s2_start, l2_cpy);
-
-	cxt->count = (cxt->count + 1) % cxt->max_count;
-}
-
-static int __init ramoops_probe(struct platform_device *pdev)
-{
-	struct ramoops_platform_data *pdata = pdev->dev.platform_data;
-	struct ramoops_context *cxt = &oops_cxt;
-	int err = -EINVAL;
-
-	if (!pdata->mem_size || !pdata->record_size) {
-		pr_err("The memory size and the record size must be "
-			"non-zero\n");
-		goto fail3;
-	}
-
-	pdata->mem_size = rounddown_pow_of_two(pdata->mem_size);
-	pdata->record_size = rounddown_pow_of_two(pdata->record_size);
-
-	/* Check for the minimum memory size */
-	if (pdata->mem_size < MIN_MEM_SIZE &&
-			pdata->record_size < MIN_MEM_SIZE) {
-		pr_err("memory size too small, minium is %lu\n", MIN_MEM_SIZE);
-		goto fail3;
-	}
-
-	if (pdata->mem_size < pdata->record_size) {
-		pr_err("The memory size must be larger than the "
-			"records size\n");
-		goto fail3;
-	}
-
-	cxt->max_count = pdata->mem_size / pdata->record_size;
-	cxt->count = 0;
-	cxt->size = pdata->mem_size;
-	cxt->phys_addr = pdata->mem_address;
-	cxt->record_size = pdata->record_size;
-	cxt->dump_oops = pdata->dump_oops;
-
-	if (!request_mem_region(cxt->phys_addr, cxt->size, "ramoops")) {
-		pr_err("request mem region failed\n");
-		err = -EINVAL;
-		goto fail3;
-	}
-
-	cxt->virt_addr = ioremap(cxt->phys_addr,  cxt->size);
-	if (!cxt->virt_addr) {
-		pr_err("ioremap failed\n");
-		goto fail2;
-	}
-
-	cxt->dump.dump = ramoops_do_dump;
-	err = kmsg_dump_register(&cxt->dump);
-	if (err) {
-		pr_err("registering kmsg dumper failed\n");
-		goto fail1;
-	}
-
-	/*
-	 * Update the module parameter variables as well so they are visible
-	 * through /sys/module/ramoops/parameters/
-	 */
-	mem_size = pdata->mem_size;
-	mem_address = pdata->mem_address;
-	record_size = pdata->record_size;
-	dump_oops = pdata->dump_oops;
-
-	return 0;
-
-fail1:
-	iounmap(cxt->virt_addr);
-fail2:
-	release_mem_region(cxt->phys_addr, cxt->size);
-fail3:
-	return err;
-}
-
-static int __exit ramoops_remove(struct platform_device *pdev)
-{
-	struct ramoops_context *cxt = &oops_cxt;
-
-	if (kmsg_dump_unregister(&cxt->dump) < 0)
-		pr_warn("could not unregister kmsg_dumper\n");
-
-	iounmap(cxt->virt_addr);
-	release_mem_region(cxt->phys_addr, cxt->size);
-	return 0;
-}
-
-static struct platform_driver ramoops_driver = {
-	.remove		= __exit_p(ramoops_remove),
-	.driver		= {
-		.name	= "ramoops",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init ramoops_init(void)
-{
-	int ret;
-	ret = platform_driver_probe(&ramoops_driver, ramoops_probe);
-	if (ret == -ENODEV) {
-		/*
-		 * If we didn't find a platform device, we use module parameters
-		 * building platform data on the fly.
-		 */
-		pr_info("platform device not found, using module parameters\n");
-		dummy_data = kzalloc(sizeof(struct ramoops_platform_data),
-				     GFP_KERNEL);
-		if (!dummy_data)
-			return -ENOMEM;
-		dummy_data->mem_size = mem_size;
-		dummy_data->mem_address = mem_address;
-		dummy_data->record_size = record_size;
-		dummy_data->dump_oops = dump_oops;
-		dummy = platform_create_bundle(&ramoops_driver, ramoops_probe,
-			NULL, 0, dummy_data,
-			sizeof(struct ramoops_platform_data));
-
-		if (IS_ERR(dummy))
-			ret = PTR_ERR(dummy);
-		else
-			ret = 0;
-	}
-
-	return ret;
-}
-
-static void __exit ramoops_exit(void)
-{
-	platform_driver_unregister(&ramoops_driver);
-	kfree(dummy_data);
-}
-
-module_init(ramoops_init);
-module_exit(ramoops_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marco Stornelli <marco.stornelli@gmail.com>");
-MODULE_DESCRIPTION("RAM Oops/Panic logger/driver");
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 31ba11ca75e1..2c5d15beea35 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -167,6 +167,7 @@ static const struct config_registers v4_config_registers = {
 	.BOOTSTS = UNIMPLEMENTED,
 	.CTL_1 = UNIMPLEMENTED,
 };
+
 static const struct config_registers v5_config_registers = {
 	.CRC = 0,
 	.FAR = 1,
@@ -192,6 +193,31 @@ static const struct config_registers v5_config_registers = {
 	.CTL_1 = 19,
 };
 
+static const struct config_registers v6_config_registers = {
+	.CRC = 0,
+	.FAR = 1,
+	.FDRI = 2,
+	.FDRO = 3,
+	.CMD = 4,
+	.CTL = 5,
+	.MASK = 6,
+	.STAT = 7,
+	.LOUT = 8,
+	.COR = 9,
+	.MFWR = 10,
+	.FLR = UNIMPLEMENTED,
+	.KEY = UNIMPLEMENTED,
+	.CBC = 11,
+	.IDCODE = 12,
+	.AXSS = 13,
+	.C0R_1 = 14,
+	.CSOB = 15,
+	.WBSTAR = 16,
+	.TIMER = 17,
+	.BOOTSTS = 22,
+	.CTL_1 = 24,
+};
+
 /**
  * hwicap_command_desync - Send a DESYNC command to the ICAP port.
  * @drvdata: a pointer to the drvdata.
@@ -744,6 +770,8 @@ static int __devinit hwicap_of_probe(struct platform_device *op,
 			regs = &v4_config_registers;
 		} else if (!strcmp(family, "virtex5")) {
 			regs = &v5_config_registers;
+		} else if (!strcmp(family, "virtex6")) {
+			regs = &v6_config_registers;
 		}
 	}
 	return hwicap_setup(&op->dev, id ? *id : -1, &res, config,
@@ -785,6 +813,8 @@ static int __devinit hwicap_drv_probe(struct platform_device *pdev)
 			regs = &v4_config_registers;
 		} else if (!strcmp(family, "virtex5")) {
 			regs = &v5_config_registers;
+		} else if (!strcmp(family, "virtex6")) {
+			regs = &v6_config_registers;
 		}
 	}
 
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 8cca11981c5f..d31ee23c9f13 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -86,7 +86,7 @@ struct hwicap_driver_config {
 };
 
 /* Number of times to poll the done regsiter */
-#define XHI_MAX_RETRIES     10
+#define XHI_MAX_RETRIES     5000
 
 /************ Constant Definitions *************/
 
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 371f13cc38eb..6373fa0ddb65 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -297,4 +297,21 @@ config CRYPTO_DEV_TEGRA_AES
 	  To compile this driver as a module, choose M here: the module
 	  will be called tegra-aes.
 
+config CRYPTO_DEV_NX
+	tristate "Support for Power7+ in-Nest cryptographic accleration"
+	depends on PPC64 && IBMVIO
+	select CRYPTO_AES
+	select CRYPTO_CBC
+	select CRYPTO_ECB
+	select CRYPTO_CCM
+	select CRYPTO_GCM
+	select CRYPTO_AUTHENC
+	select CRYPTO_XCBC
+	select CRYPTO_SHA256
+	select CRYPTO_SHA512
+	help
+	  Support for Power7+ in-Nest cryptographic acceleration. This
+	  module supports acceleration for AES and SHA2 algorithms. If you
+	  choose 'M' here, this module will be called nx_crypto.
+
 endif # CRYPTO_HW
diff --git a/drivers/crypto/nx/Makefile b/drivers/crypto/nx/Makefile
new file mode 100644
index 000000000000..411ce59c80d1
--- /dev/null
+++ b/drivers/crypto/nx/Makefile
@@ -0,0 +1,11 @@
+obj-$(CONFIG_CRYPTO_DEV_NX) += nx-crypto.o
+nx-crypto-objs := nx.o \
+		  nx_debugfs.o \
+		  nx-aes-cbc.o \
+		  nx-aes-ecb.o \
+		  nx-aes-gcm.o \
+		  nx-aes-ccm.o \
+		  nx-aes-ctr.o \
+		  nx-aes-xcbc.o \
+		  nx-sha256.o \
+		  nx-sha512.o
diff --git a/drivers/crypto/nx/nx-aes-cbc.c b/drivers/crypto/nx/nx-aes-cbc.c
new file mode 100644
index 000000000000..69ed796ee327
--- /dev/null
+++ b/drivers/crypto/nx/nx-aes-cbc.c
@@ -0,0 +1,141 @@
+/**
+ * AES CBC routines supporting the Power 7+ Nest Accelerators driver
+ *
+ * Copyright (C) 2011-2012 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Kent Yoder <yoder1@us.ibm.com>
+ */
+
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <asm/vio.h>
+
+#include "nx_csbcpb.h"
+#include "nx.h"
+
+
+static int cbc_aes_nx_set_key(struct crypto_tfm *tfm,
+			      const u8          *in_key,
+			      unsigned int       key_len)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+
+	nx_ctx_init(nx_ctx, HCOP_FC_AES);
+
+	switch (key_len) {
+	case AES_KEYSIZE_128:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_128);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_128];
+		break;
+	case AES_KEYSIZE_192:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_192);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_192];
+		break;
+	case AES_KEYSIZE_256:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_256);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_256];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	csbcpb->cpb.hdr.mode = NX_MODE_AES_CBC;
+	memcpy(csbcpb->cpb.aes_cbc.key, in_key, key_len);
+
+	return 0;
+}
+
+static int cbc_aes_nx_crypt(struct blkcipher_desc *desc,
+			    struct scatterlist    *dst,
+			    struct scatterlist    *src,
+			    unsigned int           nbytes,
+			    int                    enc)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	int rc;
+
+	if (nbytes > nx_ctx->ap->databytelen)
+		return -EINVAL;
+
+	if (enc)
+		NX_CPB_FDM(csbcpb) |= NX_FDM_ENDE_ENCRYPT;
+	else
+		NX_CPB_FDM(csbcpb) &= ~NX_FDM_ENDE_ENCRYPT;
+
+	rc = nx_build_sg_lists(nx_ctx, desc, dst, src, nbytes,
+			       csbcpb->cpb.aes_cbc.iv);
+	if (rc)
+		goto out;
+
+	if (!nx_ctx->op.inlen || !nx_ctx->op.outlen) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->aes_ops));
+	atomic64_add(csbcpb->csb.processed_byte_count,
+		     &(nx_ctx->stats->aes_bytes));
+out:
+	return rc;
+}
+
+static int cbc_aes_nx_encrypt(struct blkcipher_desc *desc,
+			      struct scatterlist    *dst,
+			      struct scatterlist    *src,
+			      unsigned int           nbytes)
+{
+	return cbc_aes_nx_crypt(desc, dst, src, nbytes, 1);
+}
+
+static int cbc_aes_nx_decrypt(struct blkcipher_desc *desc,
+			      struct scatterlist    *dst,
+			      struct scatterlist    *src,
+			      unsigned int           nbytes)
+{
+	return cbc_aes_nx_crypt(desc, dst, src, nbytes, 0);
+}
+
+struct crypto_alg nx_cbc_aes_alg = {
+	.cra_name        = "cbc(aes)",
+	.cra_driver_name = "cbc-aes-nx",
+	.cra_priority    = 300,
+	.cra_flags       = CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize   = AES_BLOCK_SIZE,
+	.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+	.cra_type        = &crypto_blkcipher_type,
+	.cra_module      = THIS_MODULE,
+	.cra_list        = LIST_HEAD_INIT(nx_cbc_aes_alg.cra_list),
+	.cra_init        = nx_crypto_ctx_aes_cbc_init,
+	.cra_exit        = nx_crypto_ctx_exit,
+	.cra_blkcipher = {
+		.min_keysize = AES_MIN_KEY_SIZE,
+		.max_keysize = AES_MAX_KEY_SIZE,
+		.ivsize      = AES_BLOCK_SIZE,
+		.setkey      = cbc_aes_nx_set_key,
+		.encrypt     = cbc_aes_nx_encrypt,
+		.decrypt     = cbc_aes_nx_decrypt,
+	}
+};
diff --git a/drivers/crypto/nx/nx-aes-ccm.c b/drivers/crypto/nx/nx-aes-ccm.c
new file mode 100644
index 000000000000..7aeac678b9c0
--- /dev/null
+++ b/drivers/crypto/nx/nx-aes-ccm.c
@@ -0,0 +1,468 @@
+/**
+ * AES CCM routines supporting the Power 7+ Nest Accelerators driver
+ *
+ * Copyright (C) 2012 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Kent Yoder <yoder1@us.ibm.com>
+ */
+
+#include <crypto/internal/aead.h>
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <crypto/scatterwalk.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <asm/vio.h>
+
+#include "nx_csbcpb.h"
+#include "nx.h"
+
+
+static int ccm_aes_nx_set_key(struct crypto_aead *tfm,
+			      const u8           *in_key,
+			      unsigned int        key_len)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&tfm->base);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	struct nx_csbcpb *csbcpb_aead = nx_ctx->csbcpb_aead;
+
+	nx_ctx_init(nx_ctx, HCOP_FC_AES);
+
+	switch (key_len) {
+	case AES_KEYSIZE_128:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_128);
+		NX_CPB_SET_KEY_SIZE(csbcpb_aead, NX_KS_AES_128);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_128];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	csbcpb->cpb.hdr.mode = NX_MODE_AES_CCM;
+	memcpy(csbcpb->cpb.aes_ccm.key, in_key, key_len);
+
+	csbcpb_aead->cpb.hdr.mode = NX_MODE_AES_CCA;
+	memcpy(csbcpb_aead->cpb.aes_cca.key, in_key, key_len);
+
+	return 0;
+
+}
+
+static int ccm4309_aes_nx_set_key(struct crypto_aead *tfm,
+				  const u8           *in_key,
+				  unsigned int        key_len)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&tfm->base);
+
+	if (key_len < 3)
+		return -EINVAL;
+
+	key_len -= 3;
+
+	memcpy(nx_ctx->priv.ccm.nonce, in_key + key_len, 3);
+
+	return ccm_aes_nx_set_key(tfm, in_key, key_len);
+}
+
+static int ccm_aes_nx_setauthsize(struct crypto_aead *tfm,
+				  unsigned int authsize)
+{
+	switch (authsize) {
+	case 4:
+	case 6:
+	case 8:
+	case 10:
+	case 12:
+	case 14:
+	case 16:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	crypto_aead_crt(tfm)->authsize = authsize;
+
+	return 0;
+}
+
+static int ccm4309_aes_nx_setauthsize(struct crypto_aead *tfm,
+				      unsigned int authsize)
+{
+	switch (authsize) {
+	case 8:
+	case 12:
+	case 16:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	crypto_aead_crt(tfm)->authsize = authsize;
+
+	return 0;
+}
+
+/* taken from crypto/ccm.c */
+static int set_msg_len(u8 *block, unsigned int msglen, int csize)
+{
+	__be32 data;
+
+	memset(block, 0, csize);
+	block += csize;
+
+	if (csize >= 4)
+		csize = 4;
+	else if (msglen > (unsigned int)(1 << (8 * csize)))
+		return -EOVERFLOW;
+
+	data = cpu_to_be32(msglen);
+	memcpy(block - csize, (u8 *)&data + 4 - csize, csize);
+
+	return 0;
+}
+
+/* taken from crypto/ccm.c */
+static inline int crypto_ccm_check_iv(const u8 *iv)
+{
+	/* 2 <= L <= 8, so 1 <= L' <= 7. */
+	if (1 > iv[0] || iv[0] > 7)
+		return -EINVAL;
+
+	return 0;
+}
+
+/* based on code from crypto/ccm.c */
+static int generate_b0(u8 *iv, unsigned int assoclen, unsigned int authsize,
+		       unsigned int cryptlen, u8 *b0)
+{
+	unsigned int l, lp, m = authsize;
+	int rc;
+
+	memcpy(b0, iv, 16);
+
+	lp = b0[0];
+	l = lp + 1;
+
+	/* set m, bits 3-5 */
+	*b0 |= (8 * ((m - 2) / 2));
+
+	/* set adata, bit 6, if associated data is used */
+	if (assoclen)
+		*b0 |= 64;
+
+	rc = set_msg_len(b0 + 16 - l, cryptlen, l);
+
+	return rc;
+}
+
+static int generate_pat(u8                   *iv,
+			struct aead_request  *req,
+			struct nx_crypto_ctx *nx_ctx,
+			unsigned int          authsize,
+			unsigned int          nbytes,
+			u8                   *out)
+{
+	struct nx_sg *nx_insg = nx_ctx->in_sg;
+	struct nx_sg *nx_outsg = nx_ctx->out_sg;
+	unsigned int iauth_len = 0;
+	struct vio_pfo_op *op = NULL;
+	u8 tmp[16], *b1 = NULL, *b0 = NULL, *result = NULL;
+	int rc;
+
+	/* zero the ctr value */
+	memset(iv + 15 - iv[0], 0, iv[0] + 1);
+
+	if (!req->assoclen) {
+		b0 = nx_ctx->csbcpb->cpb.aes_ccm.in_pat_or_b0;
+	} else if (req->assoclen <= 14) {
+		/* if associated data is 14 bytes or less, we do 1 GCM
+		 * operation on 2 AES blocks, B0 (stored in the csbcpb) and B1,
+		 * which is fed in through the source buffers here */
+		b0 = nx_ctx->csbcpb->cpb.aes_ccm.in_pat_or_b0;
+		b1 = nx_ctx->priv.ccm.iauth_tag;
+		iauth_len = req->assoclen;
+
+		nx_insg = nx_build_sg_list(nx_insg, b1, 16, nx_ctx->ap->sglen);
+		nx_outsg = nx_build_sg_list(nx_outsg, tmp, 16,
+					    nx_ctx->ap->sglen);
+
+		/* inlen should be negative, indicating to phyp that its a
+		 * pointer to an sg list */
+		nx_ctx->op.inlen = (nx_ctx->in_sg - nx_insg) *
+					sizeof(struct nx_sg);
+		nx_ctx->op.outlen = (nx_ctx->out_sg - nx_outsg) *
+					sizeof(struct nx_sg);
+
+		NX_CPB_FDM(nx_ctx->csbcpb) |= NX_FDM_ENDE_ENCRYPT;
+		NX_CPB_FDM(nx_ctx->csbcpb) |= NX_FDM_INTERMEDIATE;
+
+		op = &nx_ctx->op;
+		result = nx_ctx->csbcpb->cpb.aes_ccm.out_pat_or_mac;
+	} else if (req->assoclen <= 65280) {
+		/* if associated data is less than (2^16 - 2^8), we construct
+		 * B1 differently and feed in the associated data to a CCA
+		 * operation */
+		b0 = nx_ctx->csbcpb_aead->cpb.aes_cca.b0;
+		b1 = nx_ctx->csbcpb_aead->cpb.aes_cca.b1;
+		iauth_len = 14;
+
+		/* remaining assoc data must have scatterlist built for it */
+		nx_insg = nx_walk_and_build(nx_insg, nx_ctx->ap->sglen,
+					    req->assoc, iauth_len,
+					    req->assoclen - iauth_len);
+		nx_ctx->op_aead.inlen = (nx_ctx->in_sg - nx_insg) *
+						sizeof(struct nx_sg);
+
+		op = &nx_ctx->op_aead;
+		result = nx_ctx->csbcpb_aead->cpb.aes_cca.out_pat_or_b0;
+	} else {
+		/* if associated data is less than (2^32), we construct B1
+		 * differently yet again and feed in the associated data to a
+		 * CCA operation */
+		pr_err("associated data len is %u bytes (returning -EINVAL)\n",
+		       req->assoclen);
+		rc = -EINVAL;
+	}
+
+	rc = generate_b0(iv, req->assoclen, authsize, nbytes, b0);
+	if (rc)
+		goto done;
+
+	if (b1) {
+		memset(b1, 0, 16);
+		*(u16 *)b1 = (u16)req->assoclen;
+
+		scatterwalk_map_and_copy(b1 + 2, req->assoc, 0,
+					 iauth_len, SCATTERWALK_FROM_SG);
+
+		rc = nx_hcall_sync(nx_ctx, op,
+				   req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+		if (rc)
+			goto done;
+
+		atomic_inc(&(nx_ctx->stats->aes_ops));
+		atomic64_add(req->assoclen, &(nx_ctx->stats->aes_bytes));
+
+		memcpy(out, result, AES_BLOCK_SIZE);
+	}
+done:
+	return rc;
+}
+
+static int ccm_nx_decrypt(struct aead_request   *req,
+			  struct blkcipher_desc *desc)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	unsigned int nbytes = req->cryptlen;
+	unsigned int authsize = crypto_aead_authsize(crypto_aead_reqtfm(req));
+	struct nx_ccm_priv *priv = &nx_ctx->priv.ccm;
+	int rc = -1;
+
+	if (nbytes > nx_ctx->ap->databytelen)
+		return -EINVAL;
+
+	nbytes -= authsize;
+
+	/* copy out the auth tag to compare with later */
+	scatterwalk_map_and_copy(priv->oauth_tag,
+				 req->src, nbytes, authsize,
+				 SCATTERWALK_FROM_SG);
+
+	rc = generate_pat(desc->info, req, nx_ctx, authsize, nbytes,
+			  csbcpb->cpb.aes_ccm.in_pat_or_b0);
+	if (rc)
+		goto out;
+
+	rc = nx_build_sg_lists(nx_ctx, desc, req->dst, req->src, nbytes,
+			       csbcpb->cpb.aes_ccm.iv_or_ctr);
+	if (rc)
+		goto out;
+
+	NX_CPB_FDM(nx_ctx->csbcpb) &= ~NX_FDM_ENDE_ENCRYPT;
+	NX_CPB_FDM(nx_ctx->csbcpb) &= ~NX_FDM_INTERMEDIATE;
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->aes_ops));
+	atomic64_add(csbcpb->csb.processed_byte_count,
+		     &(nx_ctx->stats->aes_bytes));
+
+	rc = memcmp(csbcpb->cpb.aes_ccm.out_pat_or_mac, priv->oauth_tag,
+		    authsize) ? -EBADMSG : 0;
+out:
+	return rc;
+}
+
+static int ccm_nx_encrypt(struct aead_request   *req,
+			  struct blkcipher_desc *desc)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	unsigned int nbytes = req->cryptlen;
+	unsigned int authsize = crypto_aead_authsize(crypto_aead_reqtfm(req));
+	int rc = -1;
+
+	if (nbytes > nx_ctx->ap->databytelen)
+		return -EINVAL;
+
+	rc = generate_pat(desc->info, req, nx_ctx, authsize, nbytes,
+			  csbcpb->cpb.aes_ccm.in_pat_or_b0);
+	if (rc)
+		goto out;
+
+	rc = nx_build_sg_lists(nx_ctx, desc, req->dst, req->src, nbytes,
+			       csbcpb->cpb.aes_ccm.iv_or_ctr);
+	if (rc)
+		goto out;
+
+	NX_CPB_FDM(csbcpb) |= NX_FDM_ENDE_ENCRYPT;
+	NX_CPB_FDM(csbcpb) &= ~NX_FDM_INTERMEDIATE;
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->aes_ops));
+	atomic64_add(csbcpb->csb.processed_byte_count,
+		     &(nx_ctx->stats->aes_bytes));
+
+	/* copy out the auth tag */
+	scatterwalk_map_and_copy(csbcpb->cpb.aes_ccm.out_pat_or_mac,
+				 req->dst, nbytes, authsize,
+				 SCATTERWALK_TO_SG);
+out:
+	return rc;
+}
+
+static int ccm4309_aes_nx_encrypt(struct aead_request *req)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	struct blkcipher_desc desc;
+	u8 *iv = nx_ctx->priv.ccm.iv;
+
+	iv[0] = 3;
+	memcpy(iv + 1, nx_ctx->priv.ccm.nonce, 3);
+	memcpy(iv + 4, req->iv, 8);
+
+	desc.info = iv;
+	desc.tfm = (struct crypto_blkcipher *)req->base.tfm;
+
+	return ccm_nx_encrypt(req, &desc);
+}
+
+static int ccm_aes_nx_encrypt(struct aead_request *req)
+{
+	struct blkcipher_desc desc;
+	int rc;
+
+	desc.info = req->iv;
+	desc.tfm = (struct crypto_blkcipher *)req->base.tfm;
+
+	rc = crypto_ccm_check_iv(desc.info);
+	if (rc)
+		return rc;
+
+	return ccm_nx_encrypt(req, &desc);
+}
+
+static int ccm4309_aes_nx_decrypt(struct aead_request *req)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	struct blkcipher_desc desc;
+	u8 *iv = nx_ctx->priv.ccm.iv;
+
+	iv[0] = 3;
+	memcpy(iv + 1, nx_ctx->priv.ccm.nonce, 3);
+	memcpy(iv + 4, req->iv, 8);
+
+	desc.info = iv;
+	desc.tfm = (struct crypto_blkcipher *)req->base.tfm;
+
+	return ccm_nx_decrypt(req, &desc);
+}
+
+static int ccm_aes_nx_decrypt(struct aead_request *req)
+{
+	struct blkcipher_desc desc;
+	int rc;
+
+	desc.info = req->iv;
+	desc.tfm = (struct crypto_blkcipher *)req->base.tfm;
+
+	rc = crypto_ccm_check_iv(desc.info);
+	if (rc)
+		return rc;
+
+	return ccm_nx_decrypt(req, &desc);
+}
+
+/* tell the block cipher walk routines that this is a stream cipher by
+ * setting cra_blocksize to 1. Even using blkcipher_walk_virt_block
+ * during encrypt/decrypt doesn't solve this problem, because it calls
+ * blkcipher_walk_done under the covers, which doesn't use walk->blocksize,
+ * but instead uses this tfm->blocksize. */
+struct crypto_alg nx_ccm_aes_alg = {
+	.cra_name        = "ccm(aes)",
+	.cra_driver_name = "ccm-aes-nx",
+	.cra_priority    = 300,
+	.cra_flags       = CRYPTO_ALG_TYPE_AEAD |
+			   CRYPTO_ALG_NEED_FALLBACK,
+	.cra_blocksize   = 1,
+	.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+	.cra_type        = &crypto_aead_type,
+	.cra_module      = THIS_MODULE,
+	.cra_list        = LIST_HEAD_INIT(nx_ccm_aes_alg.cra_list),
+	.cra_init        = nx_crypto_ctx_aes_ccm_init,
+	.cra_exit        = nx_crypto_ctx_exit,
+	.cra_aead = {
+		.ivsize      = AES_BLOCK_SIZE,
+		.maxauthsize = AES_BLOCK_SIZE,
+		.setkey      = ccm_aes_nx_set_key,
+		.setauthsize = ccm_aes_nx_setauthsize,
+		.encrypt     = ccm_aes_nx_encrypt,
+		.decrypt     = ccm_aes_nx_decrypt,
+	}
+};
+
+struct crypto_alg nx_ccm4309_aes_alg = {
+	.cra_name        = "rfc4309(ccm(aes))",
+	.cra_driver_name = "rfc4309-ccm-aes-nx",
+	.cra_priority    = 300,
+	.cra_flags       = CRYPTO_ALG_TYPE_AEAD |
+			   CRYPTO_ALG_NEED_FALLBACK,
+	.cra_blocksize   = 1,
+	.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+	.cra_type        = &crypto_nivaead_type,
+	.cra_module      = THIS_MODULE,
+	.cra_list        = LIST_HEAD_INIT(nx_ccm4309_aes_alg.cra_list),
+	.cra_init        = nx_crypto_ctx_aes_ccm_init,
+	.cra_exit        = nx_crypto_ctx_exit,
+	.cra_aead = {
+		.ivsize      = 8,
+		.maxauthsize = AES_BLOCK_SIZE,
+		.setkey      = ccm4309_aes_nx_set_key,
+		.setauthsize = ccm4309_aes_nx_setauthsize,
+		.encrypt     = ccm4309_aes_nx_encrypt,
+		.decrypt     = ccm4309_aes_nx_decrypt,
+		.geniv       = "seqiv",
+	}
+};
diff --git a/drivers/crypto/nx/nx-aes-ctr.c b/drivers/crypto/nx/nx-aes-ctr.c
new file mode 100644
index 000000000000..52d4eb05e8f7
--- /dev/null
+++ b/drivers/crypto/nx/nx-aes-ctr.c
@@ -0,0 +1,178 @@
+/**
+ * AES CTR routines supporting the Power 7+ Nest Accelerators driver
+ *
+ * Copyright (C) 2011-2012 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Kent Yoder <yoder1@us.ibm.com>
+ */
+
+#include <crypto/aes.h>
+#include <crypto/ctr.h>
+#include <crypto/algapi.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <asm/vio.h>
+
+#include "nx_csbcpb.h"
+#include "nx.h"
+
+
+static int ctr_aes_nx_set_key(struct crypto_tfm *tfm,
+			      const u8          *in_key,
+			      unsigned int       key_len)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+
+	nx_ctx_init(nx_ctx, HCOP_FC_AES);
+
+	switch (key_len) {
+	case AES_KEYSIZE_128:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_128);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_128];
+		break;
+	case AES_KEYSIZE_192:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_192);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_192];
+		break;
+	case AES_KEYSIZE_256:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_256);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_256];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	csbcpb->cpb.hdr.mode = NX_MODE_AES_CTR;
+	memcpy(csbcpb->cpb.aes_ctr.key, in_key, key_len);
+
+	return 0;
+}
+
+static int ctr3686_aes_nx_set_key(struct crypto_tfm *tfm,
+				  const u8          *in_key,
+				  unsigned int       key_len)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
+
+	if (key_len < CTR_RFC3686_NONCE_SIZE)
+		return -EINVAL;
+
+	memcpy(nx_ctx->priv.ctr.iv,
+	       in_key + key_len - CTR_RFC3686_NONCE_SIZE,
+	       CTR_RFC3686_NONCE_SIZE);
+
+	key_len -= CTR_RFC3686_NONCE_SIZE;
+
+	return ctr_aes_nx_set_key(tfm, in_key, key_len);
+}
+
+static int ctr_aes_nx_crypt(struct blkcipher_desc *desc,
+			    struct scatterlist    *dst,
+			    struct scatterlist    *src,
+			    unsigned int           nbytes)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	int rc;
+
+	if (nbytes > nx_ctx->ap->databytelen)
+		return -EINVAL;
+
+	rc = nx_build_sg_lists(nx_ctx, desc, dst, src, nbytes,
+			       csbcpb->cpb.aes_ctr.iv);
+	if (rc)
+		goto out;
+
+	if (!nx_ctx->op.inlen || !nx_ctx->op.outlen) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->aes_ops));
+	atomic64_add(csbcpb->csb.processed_byte_count,
+		     &(nx_ctx->stats->aes_bytes));
+out:
+	return rc;
+}
+
+static int ctr3686_aes_nx_crypt(struct blkcipher_desc *desc,
+				struct scatterlist    *dst,
+				struct scatterlist    *src,
+				unsigned int           nbytes)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_blkcipher_ctx(desc->tfm);
+	u8 *iv = nx_ctx->priv.ctr.iv;
+
+	memcpy(iv + CTR_RFC3686_NONCE_SIZE,
+	       desc->info, CTR_RFC3686_IV_SIZE);
+	iv[15] = 1;
+
+	desc->info = nx_ctx->priv.ctr.iv;
+
+	return ctr_aes_nx_crypt(desc, dst, src, nbytes);
+}
+
+struct crypto_alg nx_ctr_aes_alg = {
+	.cra_name        = "ctr(aes)",
+	.cra_driver_name = "ctr-aes-nx",
+	.cra_priority    = 300,
+	.cra_flags       = CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize   = 1,
+	.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+	.cra_type        = &crypto_blkcipher_type,
+	.cra_module      = THIS_MODULE,
+	.cra_list        = LIST_HEAD_INIT(nx_ctr_aes_alg.cra_list),
+	.cra_init        = nx_crypto_ctx_aes_ctr_init,
+	.cra_exit        = nx_crypto_ctx_exit,
+	.cra_blkcipher = {
+		.min_keysize = AES_MIN_KEY_SIZE,
+		.max_keysize = AES_MAX_KEY_SIZE,
+		.ivsize      = AES_BLOCK_SIZE,
+		.setkey      = ctr_aes_nx_set_key,
+		.encrypt     = ctr_aes_nx_crypt,
+		.decrypt     = ctr_aes_nx_crypt,
+	}
+};
+
+struct crypto_alg nx_ctr3686_aes_alg = {
+	.cra_name        = "rfc3686(ctr(aes))",
+	.cra_driver_name = "rfc3686-ctr-aes-nx",
+	.cra_priority    = 300,
+	.cra_flags       = CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize   = 1,
+	.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+	.cra_type        = &crypto_blkcipher_type,
+	.cra_module      = THIS_MODULE,
+	.cra_list        = LIST_HEAD_INIT(nx_ctr3686_aes_alg.cra_list),
+	.cra_init        = nx_crypto_ctx_aes_ctr_init,
+	.cra_exit        = nx_crypto_ctx_exit,
+	.cra_blkcipher = {
+		.min_keysize = AES_MIN_KEY_SIZE + CTR_RFC3686_NONCE_SIZE,
+		.max_keysize = AES_MAX_KEY_SIZE + CTR_RFC3686_NONCE_SIZE,
+		.ivsize      = CTR_RFC3686_IV_SIZE,
+		.geniv       = "seqiv",
+		.setkey      = ctr3686_aes_nx_set_key,
+		.encrypt     = ctr3686_aes_nx_crypt,
+		.decrypt     = ctr3686_aes_nx_crypt,
+	}
+};
diff --git a/drivers/crypto/nx/nx-aes-ecb.c b/drivers/crypto/nx/nx-aes-ecb.c
new file mode 100644
index 000000000000..7b77bc2d1df4
--- /dev/null
+++ b/drivers/crypto/nx/nx-aes-ecb.c
@@ -0,0 +1,139 @@
+/**
+ * AES ECB routines supporting the Power 7+ Nest Accelerators driver
+ *
+ * Copyright (C) 2011-2012 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Kent Yoder <yoder1@us.ibm.com>
+ */
+
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <asm/vio.h>
+
+#include "nx_csbcpb.h"
+#include "nx.h"
+
+
+static int ecb_aes_nx_set_key(struct crypto_tfm *tfm,
+			      const u8          *in_key,
+			      unsigned int       key_len)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
+	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+
+	nx_ctx_init(nx_ctx, HCOP_FC_AES);
+
+	switch (key_len) {
+	case AES_KEYSIZE_128:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_128);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_128];
+		break;
+	case AES_KEYSIZE_192:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_192);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_192];
+		break;
+	case AES_KEYSIZE_256:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_256);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_256];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	csbcpb->cpb.hdr.mode = NX_MODE_AES_ECB;
+	memcpy(csbcpb->cpb.aes_ecb.key, in_key, key_len);
+
+	return 0;
+}
+
+static int ecb_aes_nx_crypt(struct blkcipher_desc *desc,
+			    struct scatterlist    *dst,
+			    struct scatterlist    *src,
+			    unsigned int           nbytes,
+			    int                    enc)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_blkcipher_ctx(desc->tfm);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	int rc;
+
+	if (nbytes > nx_ctx->ap->databytelen)
+		return -EINVAL;
+
+	if (enc)
+		NX_CPB_FDM(csbcpb) |= NX_FDM_ENDE_ENCRYPT;
+	else
+		NX_CPB_FDM(csbcpb) &= ~NX_FDM_ENDE_ENCRYPT;
+
+	rc = nx_build_sg_lists(nx_ctx, desc, dst, src, nbytes, NULL);
+	if (rc)
+		goto out;
+
+	if (!nx_ctx->op.inlen || !nx_ctx->op.outlen) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->aes_ops));
+	atomic64_add(csbcpb->csb.processed_byte_count,
+		     &(nx_ctx->stats->aes_bytes));
+out:
+	return rc;
+}
+
+static int ecb_aes_nx_encrypt(struct blkcipher_desc *desc,
+			      struct scatterlist    *dst,
+			      struct scatterlist    *src,
+			      unsigned int           nbytes)
+{
+	return ecb_aes_nx_crypt(desc, dst, src, nbytes, 1);
+}
+
+static int ecb_aes_nx_decrypt(struct blkcipher_desc *desc,
+			      struct scatterlist    *dst,
+			      struct scatterlist    *src,
+			      unsigned int           nbytes)
+{
+	return ecb_aes_nx_crypt(desc, dst, src, nbytes, 0);
+}
+
+struct crypto_alg nx_ecb_aes_alg = {
+	.cra_name        = "ecb(aes)",
+	.cra_driver_name = "ecb-aes-nx",
+	.cra_priority    = 300,
+	.cra_flags       = CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_blocksize   = AES_BLOCK_SIZE,
+	.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+	.cra_type        = &crypto_blkcipher_type,
+	.cra_module      = THIS_MODULE,
+	.cra_list        = LIST_HEAD_INIT(nx_ecb_aes_alg.cra_list),
+	.cra_init        = nx_crypto_ctx_aes_ecb_init,
+	.cra_exit        = nx_crypto_ctx_exit,
+	.cra_blkcipher = {
+		.min_keysize = AES_MIN_KEY_SIZE,
+		.max_keysize = AES_MAX_KEY_SIZE,
+		.setkey      = ecb_aes_nx_set_key,
+		.encrypt     = ecb_aes_nx_encrypt,
+		.decrypt     = ecb_aes_nx_decrypt,
+	}
+};
diff --git a/drivers/crypto/nx/nx-aes-gcm.c b/drivers/crypto/nx/nx-aes-gcm.c
new file mode 100644
index 000000000000..9ab1c7341dac
--- /dev/null
+++ b/drivers/crypto/nx/nx-aes-gcm.c
@@ -0,0 +1,353 @@
+/**
+ * AES GCM routines supporting the Power 7+ Nest Accelerators driver
+ *
+ * Copyright (C) 2012 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Kent Yoder <yoder1@us.ibm.com>
+ */
+
+#include <crypto/internal/aead.h>
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <crypto/scatterwalk.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <asm/vio.h>
+
+#include "nx_csbcpb.h"
+#include "nx.h"
+
+
+static int gcm_aes_nx_set_key(struct crypto_aead *tfm,
+			      const u8           *in_key,
+			      unsigned int        key_len)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&tfm->base);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	struct nx_csbcpb *csbcpb_aead = nx_ctx->csbcpb_aead;
+
+	nx_ctx_init(nx_ctx, HCOP_FC_AES);
+
+	switch (key_len) {
+	case AES_KEYSIZE_128:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_128);
+		NX_CPB_SET_KEY_SIZE(csbcpb_aead, NX_KS_AES_128);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_128];
+		break;
+	case AES_KEYSIZE_192:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_192);
+		NX_CPB_SET_KEY_SIZE(csbcpb_aead, NX_KS_AES_192);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_192];
+		break;
+	case AES_KEYSIZE_256:
+		NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_256);
+		NX_CPB_SET_KEY_SIZE(csbcpb_aead, NX_KS_AES_256);
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_256];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	csbcpb->cpb.hdr.mode = NX_MODE_AES_GCM;
+	memcpy(csbcpb->cpb.aes_gcm.key, in_key, key_len);
+
+	csbcpb_aead->cpb.hdr.mode = NX_MODE_AES_GCA;
+	memcpy(csbcpb_aead->cpb.aes_gca.key, in_key, key_len);
+
+	return 0;
+}
+
+static int gcm4106_aes_nx_set_key(struct crypto_aead *tfm,
+				  const u8           *in_key,
+				  unsigned int        key_len)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&tfm->base);
+	char *nonce = nx_ctx->priv.gcm.nonce;
+	int rc;
+
+	if (key_len < 4)
+		return -EINVAL;
+
+	key_len -= 4;
+
+	rc = gcm_aes_nx_set_key(tfm, in_key, key_len);
+	if (rc)
+		goto out;
+
+	memcpy(nonce, in_key + key_len, 4);
+out:
+	return rc;
+}
+
+static int gcm_aes_nx_setauthsize(struct crypto_aead *tfm,
+				  unsigned int authsize)
+{
+	if (authsize > crypto_aead_alg(tfm)->maxauthsize)
+		return -EINVAL;
+
+	crypto_aead_crt(tfm)->authsize = authsize;
+
+	return 0;
+}
+
+static int gcm4106_aes_nx_setauthsize(struct crypto_aead *tfm,
+				      unsigned int authsize)
+{
+	switch (authsize) {
+	case 8:
+	case 12:
+	case 16:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	crypto_aead_crt(tfm)->authsize = authsize;
+
+	return 0;
+}
+
+static int nx_gca(struct nx_crypto_ctx  *nx_ctx,
+		  struct aead_request   *req,
+		  u8                    *out)
+{
+	struct nx_csbcpb *csbcpb_aead = nx_ctx->csbcpb_aead;
+	int rc = -EINVAL;
+	struct scatter_walk walk;
+	struct nx_sg *nx_sg = nx_ctx->in_sg;
+
+	if (req->assoclen > nx_ctx->ap->databytelen)
+		goto out;
+
+	if (req->assoclen <= AES_BLOCK_SIZE) {
+		scatterwalk_start(&walk, req->assoc);
+		scatterwalk_copychunks(out, &walk, req->assoclen,
+				       SCATTERWALK_FROM_SG);
+		scatterwalk_done(&walk, SCATTERWALK_FROM_SG, 0);
+
+		rc = 0;
+		goto out;
+	}
+
+	nx_sg = nx_walk_and_build(nx_sg, nx_ctx->ap->sglen, req->assoc, 0,
+				  req->assoclen);
+	nx_ctx->op_aead.inlen = (nx_ctx->in_sg - nx_sg) * sizeof(struct nx_sg);
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op_aead,
+			   req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->aes_ops));
+	atomic64_add(req->assoclen, &(nx_ctx->stats->aes_bytes));
+
+	memcpy(out, csbcpb_aead->cpb.aes_gca.out_pat, AES_BLOCK_SIZE);
+out:
+	return rc;
+}
+
+static int gcm_aes_nx_crypt(struct aead_request *req, int enc)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	struct blkcipher_desc desc;
+	unsigned int nbytes = req->cryptlen;
+	int rc = -EINVAL;
+
+	if (nbytes > nx_ctx->ap->databytelen)
+		goto out;
+
+	desc.info = nx_ctx->priv.gcm.iv;
+	/* initialize the counter */
+	*(u32 *)(desc.info + NX_GCM_CTR_OFFSET) = 1;
+
+	/* For scenarios where the input message is zero length, AES CTR mode
+	 * may be used. Set the source data to be a single block (16B) of all
+	 * zeros, and set the input IV value to be the same as the GMAC IV
+	 * value. - nx_wb 4.8.1.3 */
+	if (nbytes == 0) {
+		char src[AES_BLOCK_SIZE] = {};
+		struct scatterlist sg;
+
+		desc.tfm = crypto_alloc_blkcipher("ctr(aes)", 0, 0);
+		if (IS_ERR(desc.tfm)) {
+			rc = -ENOMEM;
+			goto out;
+		}
+
+		crypto_blkcipher_setkey(desc.tfm, csbcpb->cpb.aes_gcm.key,
+			NX_CPB_KEY_SIZE(csbcpb) == NX_KS_AES_128 ? 16 :
+			NX_CPB_KEY_SIZE(csbcpb) == NX_KS_AES_192 ? 24 : 32);
+
+		sg_init_one(&sg, src, AES_BLOCK_SIZE);
+		if (enc)
+			crypto_blkcipher_encrypt_iv(&desc, req->dst, &sg,
+						    AES_BLOCK_SIZE);
+		else
+			crypto_blkcipher_decrypt_iv(&desc, req->dst, &sg,
+						    AES_BLOCK_SIZE);
+		crypto_free_blkcipher(desc.tfm);
+
+		rc = 0;
+		goto out;
+	}
+
+	desc.tfm = (struct crypto_blkcipher *)req->base.tfm;
+
+	csbcpb->cpb.aes_gcm.bit_length_aad = req->assoclen * 8;
+
+	if (req->assoclen) {
+		rc = nx_gca(nx_ctx, req, csbcpb->cpb.aes_gcm.in_pat_or_aad);
+		if (rc)
+			goto out;
+	}
+
+	if (enc)
+		NX_CPB_FDM(csbcpb) |= NX_FDM_ENDE_ENCRYPT;
+	else
+		nbytes -= AES_BLOCK_SIZE;
+
+	csbcpb->cpb.aes_gcm.bit_length_data = nbytes * 8;
+
+	rc = nx_build_sg_lists(nx_ctx, &desc, req->dst, req->src, nbytes,
+			       csbcpb->cpb.aes_gcm.iv_or_cnt);
+	if (rc)
+		goto out;
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->aes_ops));
+	atomic64_add(csbcpb->csb.processed_byte_count,
+		     &(nx_ctx->stats->aes_bytes));
+
+	if (enc) {
+		/* copy out the auth tag */
+		scatterwalk_map_and_copy(csbcpb->cpb.aes_gcm.out_pat_or_mac,
+				 req->dst, nbytes,
+				 crypto_aead_authsize(crypto_aead_reqtfm(req)),
+				 SCATTERWALK_TO_SG);
+	} else if (req->assoclen) {
+		u8 *itag = nx_ctx->priv.gcm.iauth_tag;
+		u8 *otag = csbcpb->cpb.aes_gcm.out_pat_or_mac;
+
+		scatterwalk_map_and_copy(itag, req->dst, nbytes,
+				 crypto_aead_authsize(crypto_aead_reqtfm(req)),
+				 SCATTERWALK_FROM_SG);
+		rc = memcmp(itag, otag,
+			    crypto_aead_authsize(crypto_aead_reqtfm(req))) ?
+		     -EBADMSG : 0;
+	}
+out:
+	return rc;
+}
+
+static int gcm_aes_nx_encrypt(struct aead_request *req)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	char *iv = nx_ctx->priv.gcm.iv;
+
+	memcpy(iv, req->iv, 12);
+
+	return gcm_aes_nx_crypt(req, 1);
+}
+
+static int gcm_aes_nx_decrypt(struct aead_request *req)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	char *iv = nx_ctx->priv.gcm.iv;
+
+	memcpy(iv, req->iv, 12);
+
+	return gcm_aes_nx_crypt(req, 0);
+}
+
+static int gcm4106_aes_nx_encrypt(struct aead_request *req)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	char *iv = nx_ctx->priv.gcm.iv;
+	char *nonce = nx_ctx->priv.gcm.nonce;
+
+	memcpy(iv, nonce, NX_GCM4106_NONCE_LEN);
+	memcpy(iv + NX_GCM4106_NONCE_LEN, req->iv, 8);
+
+	return gcm_aes_nx_crypt(req, 1);
+}
+
+static int gcm4106_aes_nx_decrypt(struct aead_request *req)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(req->base.tfm);
+	char *iv = nx_ctx->priv.gcm.iv;
+	char *nonce = nx_ctx->priv.gcm.nonce;
+
+	memcpy(iv, nonce, NX_GCM4106_NONCE_LEN);
+	memcpy(iv + NX_GCM4106_NONCE_LEN, req->iv, 8);
+
+	return gcm_aes_nx_crypt(req, 0);
+}
+
+/* tell the block cipher walk routines that this is a stream cipher by
+ * setting cra_blocksize to 1. Even using blkcipher_walk_virt_block
+ * during encrypt/decrypt doesn't solve this problem, because it calls
+ * blkcipher_walk_done under the covers, which doesn't use walk->blocksize,
+ * but instead uses this tfm->blocksize. */
+struct crypto_alg nx_gcm_aes_alg = {
+	.cra_name        = "gcm(aes)",
+	.cra_driver_name = "gcm-aes-nx",
+	.cra_priority    = 300,
+	.cra_flags       = CRYPTO_ALG_TYPE_AEAD,
+	.cra_blocksize   = 1,
+	.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+	.cra_type        = &crypto_aead_type,
+	.cra_module      = THIS_MODULE,
+	.cra_list        = LIST_HEAD_INIT(nx_gcm_aes_alg.cra_list),
+	.cra_init        = nx_crypto_ctx_aes_gcm_init,
+	.cra_exit        = nx_crypto_ctx_exit,
+	.cra_aead = {
+		.ivsize      = AES_BLOCK_SIZE,
+		.maxauthsize = AES_BLOCK_SIZE,
+		.setkey      = gcm_aes_nx_set_key,
+		.setauthsize = gcm_aes_nx_setauthsize,
+		.encrypt     = gcm_aes_nx_encrypt,
+		.decrypt     = gcm_aes_nx_decrypt,
+	}
+};
+
+struct crypto_alg nx_gcm4106_aes_alg = {
+	.cra_name        = "rfc4106(gcm(aes))",
+	.cra_driver_name = "rfc4106-gcm-aes-nx",
+	.cra_priority    = 300,
+	.cra_flags       = CRYPTO_ALG_TYPE_AEAD,
+	.cra_blocksize   = 1,
+	.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+	.cra_type        = &crypto_nivaead_type,
+	.cra_module      = THIS_MODULE,
+	.cra_list        = LIST_HEAD_INIT(nx_gcm4106_aes_alg.cra_list),
+	.cra_init        = nx_crypto_ctx_aes_gcm_init,
+	.cra_exit        = nx_crypto_ctx_exit,
+	.cra_aead = {
+		.ivsize      = 8,
+		.maxauthsize = AES_BLOCK_SIZE,
+		.geniv       = "seqiv",
+		.setkey      = gcm4106_aes_nx_set_key,
+		.setauthsize = gcm4106_aes_nx_setauthsize,
+		.encrypt     = gcm4106_aes_nx_encrypt,
+		.decrypt     = gcm4106_aes_nx_decrypt,
+	}
+};
diff --git a/drivers/crypto/nx/nx-aes-xcbc.c b/drivers/crypto/nx/nx-aes-xcbc.c
new file mode 100644
index 000000000000..93923e4628c0
--- /dev/null
+++ b/drivers/crypto/nx/nx-aes-xcbc.c
@@ -0,0 +1,236 @@
+/**
+ * AES XCBC routines supporting the Power 7+ Nest Accelerators driver
+ *
+ * Copyright (C) 2011-2012 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Kent Yoder <yoder1@us.ibm.com>
+ */
+
+#include <crypto/internal/hash.h>
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <asm/vio.h>
+
+#include "nx_csbcpb.h"
+#include "nx.h"
+
+
+struct xcbc_state {
+	u8 state[AES_BLOCK_SIZE];
+	unsigned int count;
+	u8 buffer[AES_BLOCK_SIZE];
+};
+
+static int nx_xcbc_set_key(struct crypto_shash *desc,
+			   const u8            *in_key,
+			   unsigned int         key_len)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_shash_ctx(desc);
+
+	switch (key_len) {
+	case AES_KEYSIZE_128:
+		nx_ctx->ap = &nx_ctx->props[NX_PROPS_AES_128];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	memcpy(nx_ctx->priv.xcbc.key, in_key, key_len);
+
+	return 0;
+}
+
+static int nx_xcbc_init(struct shash_desc *desc)
+{
+	struct xcbc_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	struct nx_sg *out_sg;
+
+	nx_ctx_init(nx_ctx, HCOP_FC_AES);
+
+	memset(sctx, 0, sizeof *sctx);
+
+	NX_CPB_SET_KEY_SIZE(csbcpb, NX_KS_AES_128);
+	csbcpb->cpb.hdr.mode = NX_MODE_AES_XCBC_MAC;
+
+	memcpy(csbcpb->cpb.aes_xcbc.key, nx_ctx->priv.xcbc.key, AES_BLOCK_SIZE);
+	memset(nx_ctx->priv.xcbc.key, 0, sizeof *nx_ctx->priv.xcbc.key);
+
+	out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+				  AES_BLOCK_SIZE, nx_ctx->ap->sglen);
+	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+	return 0;
+}
+
+static int nx_xcbc_update(struct shash_desc *desc,
+			  const u8          *data,
+			  unsigned int       len)
+{
+	struct xcbc_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	struct nx_sg *in_sg;
+	u32 to_process, leftover;
+	int rc = 0;
+
+	if (NX_CPB_FDM(csbcpb) & NX_FDM_CONTINUATION) {
+		/* we've hit the nx chip previously and we're updating again,
+		 * so copy over the partial digest */
+		memcpy(csbcpb->cpb.aes_xcbc.cv,
+		       csbcpb->cpb.aes_xcbc.out_cv_mac, AES_BLOCK_SIZE);
+	}
+
+	/* 2 cases for total data len:
+	 *  1: <= AES_BLOCK_SIZE: copy into state, return 0
+	 *  2: > AES_BLOCK_SIZE: process X blocks, copy in leftover
+	 */
+	if (len + sctx->count <= AES_BLOCK_SIZE) {
+		memcpy(sctx->buffer + sctx->count, data, len);
+		sctx->count += len;
+		goto out;
+	}
+
+	/* to_process: the AES_BLOCK_SIZE data chunk to process in this
+	 * update */
+	to_process = (sctx->count + len) & ~(AES_BLOCK_SIZE - 1);
+	leftover = (sctx->count + len) & (AES_BLOCK_SIZE - 1);
+
+	/* the hardware will not accept a 0 byte operation for this algorithm
+	 * and the operation MUST be finalized to be correct. So if we happen
+	 * to get an update that falls on a block sized boundary, we must
+	 * save off the last block to finalize with later. */
+	if (!leftover) {
+		to_process -= AES_BLOCK_SIZE;
+		leftover = AES_BLOCK_SIZE;
+	}
+
+	if (sctx->count) {
+		in_sg = nx_build_sg_list(nx_ctx->in_sg, sctx->buffer,
+					 sctx->count, nx_ctx->ap->sglen);
+		in_sg = nx_build_sg_list(in_sg, (u8 *)data,
+					 to_process - sctx->count,
+					 nx_ctx->ap->sglen);
+		nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) *
+					sizeof(struct nx_sg);
+	} else {
+		in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *)data, to_process,
+					 nx_ctx->ap->sglen);
+		nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) *
+					sizeof(struct nx_sg);
+	}
+
+	NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
+
+	if (!nx_ctx->op.inlen || !nx_ctx->op.outlen) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->aes_ops));
+
+	/* copy the leftover back into the state struct */
+	memcpy(sctx->buffer, data + len - leftover, leftover);
+	sctx->count = leftover;
+
+	/* everything after the first update is continuation */
+	NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
+out:
+	return rc;
+}
+
+static int nx_xcbc_final(struct shash_desc *desc, u8 *out)
+{
+	struct xcbc_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = nx_ctx->csbcpb;
+	struct nx_sg *in_sg, *out_sg;
+	int rc = 0;
+
+	if (NX_CPB_FDM(csbcpb) & NX_FDM_CONTINUATION) {
+		/* we've hit the nx chip previously, now we're finalizing,
+		 * so copy over the partial digest */
+		memcpy(csbcpb->cpb.aes_xcbc.cv,
+		       csbcpb->cpb.aes_xcbc.out_cv_mac, AES_BLOCK_SIZE);
+	} else if (sctx->count == 0) {
+		/* we've never seen an update, so this is a 0 byte op. The
+		 * hardware cannot handle a 0 byte op, so just copy out the
+		 * known 0 byte result. This is cheaper than allocating a
+		 * software context to do a 0 byte op */
+		u8 data[] = { 0x75, 0xf0, 0x25, 0x1d, 0x52, 0x8a, 0xc0, 0x1c,
+			      0x45, 0x73, 0xdf, 0xd5, 0x84, 0xd7, 0x9f, 0x29 };
+		memcpy(out, data, sizeof(data));
+		goto out;
+	}
+
+	/* final is represented by continuing the operation and indicating that
+	 * this is not an intermediate operation */
+	NX_CPB_FDM(csbcpb) &= ~NX_FDM_INTERMEDIATE;
+
+	in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *)sctx->buffer,
+				 sctx->count, nx_ctx->ap->sglen);
+	out_sg = nx_build_sg_list(nx_ctx->out_sg, out, AES_BLOCK_SIZE,
+				  nx_ctx->ap->sglen);
+
+	nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
+	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+	if (!nx_ctx->op.outlen) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->aes_ops));
+
+	memcpy(out, csbcpb->cpb.aes_xcbc.out_cv_mac, AES_BLOCK_SIZE);
+out:
+	return rc;
+}
+
+struct shash_alg nx_shash_aes_xcbc_alg = {
+	.digestsize = AES_BLOCK_SIZE,
+	.init       = nx_xcbc_init,
+	.update     = nx_xcbc_update,
+	.final      = nx_xcbc_final,
+	.setkey     = nx_xcbc_set_key,
+	.descsize   = sizeof(struct xcbc_state),
+	.statesize  = sizeof(struct xcbc_state),
+	.base       = {
+		.cra_name        = "xcbc(aes)",
+		.cra_driver_name = "xcbc-aes-nx",
+		.cra_priority    = 300,
+		.cra_flags       = CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize   = AES_BLOCK_SIZE,
+		.cra_module      = THIS_MODULE,
+		.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+		.cra_init        = nx_crypto_ctx_aes_xcbc_init,
+		.cra_exit        = nx_crypto_ctx_exit,
+	}
+};
diff --git a/drivers/crypto/nx/nx-sha256.c b/drivers/crypto/nx/nx-sha256.c
new file mode 100644
index 000000000000..9767315f8c0b
--- /dev/null
+++ b/drivers/crypto/nx/nx-sha256.c
@@ -0,0 +1,246 @@
+/**
+ * SHA-256 routines supporting the Power 7+ Nest Accelerators driver
+ *
+ * Copyright (C) 2011-2012 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Kent Yoder <yoder1@us.ibm.com>
+ */
+
+#include <crypto/internal/hash.h>
+#include <crypto/sha.h>
+#include <linux/module.h>
+#include <asm/vio.h>
+
+#include "nx_csbcpb.h"
+#include "nx.h"
+
+
+static int nx_sha256_init(struct shash_desc *desc)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_sg *out_sg;
+
+	nx_ctx_init(nx_ctx, HCOP_FC_SHA);
+
+	memset(sctx, 0, sizeof *sctx);
+
+	nx_ctx->ap = &nx_ctx->props[NX_PROPS_SHA256];
+
+	NX_CPB_SET_DIGEST_SIZE(nx_ctx->csbcpb, NX_DS_SHA256);
+	out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+				  SHA256_DIGEST_SIZE, nx_ctx->ap->sglen);
+	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+	return 0;
+}
+
+static int nx_sha256_update(struct shash_desc *desc, const u8 *data,
+			    unsigned int len)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+	struct nx_sg *in_sg;
+	u64 to_process, leftover;
+	int rc = 0;
+
+	if (NX_CPB_FDM(csbcpb) & NX_FDM_CONTINUATION) {
+		/* we've hit the nx chip previously and we're updating again,
+		 * so copy over the partial digest */
+		memcpy(csbcpb->cpb.sha256.input_partial_digest,
+		       csbcpb->cpb.sha256.message_digest, SHA256_DIGEST_SIZE);
+	}
+
+	/* 2 cases for total data len:
+	 *  1: <= SHA256_BLOCK_SIZE: copy into state, return 0
+	 *  2: > SHA256_BLOCK_SIZE: process X blocks, copy in leftover
+	 */
+	if (len + sctx->count <= SHA256_BLOCK_SIZE) {
+		memcpy(sctx->buf + sctx->count, data, len);
+		sctx->count += len;
+		goto out;
+	}
+
+	/* to_process: the SHA256_BLOCK_SIZE data chunk to process in this
+	 * update */
+	to_process = (sctx->count + len) & ~(SHA256_BLOCK_SIZE - 1);
+	leftover = (sctx->count + len) & (SHA256_BLOCK_SIZE - 1);
+
+	if (sctx->count) {
+		in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *)sctx->buf,
+					 sctx->count, nx_ctx->ap->sglen);
+		in_sg = nx_build_sg_list(in_sg, (u8 *)data,
+					 to_process - sctx->count,
+					 nx_ctx->ap->sglen);
+		nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) *
+					sizeof(struct nx_sg);
+	} else {
+		in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *)data,
+					 to_process, nx_ctx->ap->sglen);
+		nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) *
+					sizeof(struct nx_sg);
+	}
+
+	NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
+
+	if (!nx_ctx->op.inlen || !nx_ctx->op.outlen) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->sha256_ops));
+
+	/* copy the leftover back into the state struct */
+	memcpy(sctx->buf, data + len - leftover, leftover);
+	sctx->count = leftover;
+
+	csbcpb->cpb.sha256.message_bit_length += (u64)
+		(csbcpb->cpb.sha256.spbc * 8);
+
+	/* everything after the first update is continuation */
+	NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
+out:
+	return rc;
+}
+
+static int nx_sha256_final(struct shash_desc *desc, u8 *out)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+	struct nx_sg *in_sg, *out_sg;
+	int rc;
+
+	if (NX_CPB_FDM(csbcpb) & NX_FDM_CONTINUATION) {
+		/* we've hit the nx chip previously, now we're finalizing,
+		 * so copy over the partial digest */
+		memcpy(csbcpb->cpb.sha256.input_partial_digest,
+		       csbcpb->cpb.sha256.message_digest, SHA256_DIGEST_SIZE);
+	}
+
+	/* final is represented by continuing the operation and indicating that
+	 * this is not an intermediate operation */
+	NX_CPB_FDM(csbcpb) &= ~NX_FDM_INTERMEDIATE;
+
+	csbcpb->cpb.sha256.message_bit_length += (u64)(sctx->count * 8);
+
+	in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *)sctx->buf,
+				 sctx->count, nx_ctx->ap->sglen);
+	out_sg = nx_build_sg_list(nx_ctx->out_sg, out, SHA256_DIGEST_SIZE,
+				  nx_ctx->ap->sglen);
+	nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
+	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+	if (!nx_ctx->op.outlen) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->sha256_ops));
+
+	atomic64_add(csbcpb->cpb.sha256.message_bit_length,
+		     &(nx_ctx->stats->sha256_bytes));
+	memcpy(out, csbcpb->cpb.sha256.message_digest, SHA256_DIGEST_SIZE);
+out:
+	return rc;
+}
+
+static int nx_sha256_export(struct shash_desc *desc, void *out)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+	struct sha256_state *octx = out;
+
+	octx->count = sctx->count +
+		      (csbcpb->cpb.sha256.message_bit_length / 8);
+	memcpy(octx->buf, sctx->buf, sizeof(octx->buf));
+
+	/* if no data has been processed yet, we need to export SHA256's
+	 * initial data, in case this context gets imported into a software
+	 * context */
+	if (csbcpb->cpb.sha256.message_bit_length)
+		memcpy(octx->state, csbcpb->cpb.sha256.message_digest,
+		       SHA256_DIGEST_SIZE);
+	else {
+		octx->state[0] = SHA256_H0;
+		octx->state[1] = SHA256_H1;
+		octx->state[2] = SHA256_H2;
+		octx->state[3] = SHA256_H3;
+		octx->state[4] = SHA256_H4;
+		octx->state[5] = SHA256_H5;
+		octx->state[6] = SHA256_H6;
+		octx->state[7] = SHA256_H7;
+	}
+
+	return 0;
+}
+
+static int nx_sha256_import(struct shash_desc *desc, const void *in)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+	const struct sha256_state *ictx = in;
+
+	memcpy(sctx->buf, ictx->buf, sizeof(ictx->buf));
+
+	sctx->count = ictx->count & 0x3f;
+	csbcpb->cpb.sha256.message_bit_length = (ictx->count & ~0x3f) * 8;
+
+	if (csbcpb->cpb.sha256.message_bit_length) {
+		memcpy(csbcpb->cpb.sha256.message_digest, ictx->state,
+		       SHA256_DIGEST_SIZE);
+
+		NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
+		NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
+	}
+
+	return 0;
+}
+
+struct shash_alg nx_shash_sha256_alg = {
+	.digestsize = SHA256_DIGEST_SIZE,
+	.init       = nx_sha256_init,
+	.update     = nx_sha256_update,
+	.final      = nx_sha256_final,
+	.export     = nx_sha256_export,
+	.import     = nx_sha256_import,
+	.descsize   = sizeof(struct sha256_state),
+	.statesize  = sizeof(struct sha256_state),
+	.base       = {
+		.cra_name        = "sha256",
+		.cra_driver_name = "sha256-nx",
+		.cra_priority    = 300,
+		.cra_flags       = CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize   = SHA256_BLOCK_SIZE,
+		.cra_module      = THIS_MODULE,
+		.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+		.cra_init        = nx_crypto_ctx_sha_init,
+		.cra_exit        = nx_crypto_ctx_exit,
+	}
+};
diff --git a/drivers/crypto/nx/nx-sha512.c b/drivers/crypto/nx/nx-sha512.c
new file mode 100644
index 000000000000..3177b8c3d5f1
--- /dev/null
+++ b/drivers/crypto/nx/nx-sha512.c
@@ -0,0 +1,265 @@
+/**
+ * SHA-512 routines supporting the Power 7+ Nest Accelerators driver
+ *
+ * Copyright (C) 2011-2012 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Kent Yoder <yoder1@us.ibm.com>
+ */
+
+#include <crypto/internal/hash.h>
+#include <crypto/sha.h>
+#include <linux/module.h>
+#include <asm/vio.h>
+
+#include "nx_csbcpb.h"
+#include "nx.h"
+
+
+static int nx_sha512_init(struct shash_desc *desc)
+{
+	struct sha512_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_sg *out_sg;
+
+	nx_ctx_init(nx_ctx, HCOP_FC_SHA);
+
+	memset(sctx, 0, sizeof *sctx);
+
+	nx_ctx->ap = &nx_ctx->props[NX_PROPS_SHA512];
+
+	NX_CPB_SET_DIGEST_SIZE(nx_ctx->csbcpb, NX_DS_SHA512);
+	out_sg = nx_build_sg_list(nx_ctx->out_sg, (u8 *)sctx->state,
+				  SHA512_DIGEST_SIZE, nx_ctx->ap->sglen);
+	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+	return 0;
+}
+
+static int nx_sha512_update(struct shash_desc *desc, const u8 *data,
+			    unsigned int len)
+{
+	struct sha512_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+	struct nx_sg *in_sg;
+	u64 to_process, leftover, spbc_bits;
+	int rc = 0;
+
+	if (NX_CPB_FDM(csbcpb) & NX_FDM_CONTINUATION) {
+		/* we've hit the nx chip previously and we're updating again,
+		 * so copy over the partial digest */
+		memcpy(csbcpb->cpb.sha512.input_partial_digest,
+		       csbcpb->cpb.sha512.message_digest, SHA512_DIGEST_SIZE);
+	}
+
+	/* 2 cases for total data len:
+	 *  1: <= SHA512_BLOCK_SIZE: copy into state, return 0
+	 *  2: > SHA512_BLOCK_SIZE: process X blocks, copy in leftover
+	 */
+	if ((u64)len + sctx->count[0] <= SHA512_BLOCK_SIZE) {
+		memcpy(sctx->buf + sctx->count[0], data, len);
+		sctx->count[0] += len;
+		goto out;
+	}
+
+	/* to_process: the SHA512_BLOCK_SIZE data chunk to process in this
+	 * update */
+	to_process = (sctx->count[0] + len) & ~(SHA512_BLOCK_SIZE - 1);
+	leftover = (sctx->count[0] + len) & (SHA512_BLOCK_SIZE - 1);
+
+	if (sctx->count[0]) {
+		in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *)sctx->buf,
+					 sctx->count[0], nx_ctx->ap->sglen);
+		in_sg = nx_build_sg_list(in_sg, (u8 *)data,
+					 to_process - sctx->count[0],
+					 nx_ctx->ap->sglen);
+		nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) *
+					sizeof(struct nx_sg);
+	} else {
+		in_sg = nx_build_sg_list(nx_ctx->in_sg, (u8 *)data,
+					 to_process, nx_ctx->ap->sglen);
+		nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) *
+					sizeof(struct nx_sg);
+	}
+
+	NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
+
+	if (!nx_ctx->op.inlen || !nx_ctx->op.outlen) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->sha512_ops));
+
+	/* copy the leftover back into the state struct */
+	memcpy(sctx->buf, data + len - leftover, leftover);
+	sctx->count[0] = leftover;
+
+	spbc_bits = csbcpb->cpb.sha512.spbc * 8;
+	csbcpb->cpb.sha512.message_bit_length_lo += spbc_bits;
+	if (csbcpb->cpb.sha512.message_bit_length_lo < spbc_bits)
+		csbcpb->cpb.sha512.message_bit_length_hi++;
+
+	/* everything after the first update is continuation */
+	NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
+out:
+	return rc;
+}
+
+static int nx_sha512_final(struct shash_desc *desc, u8 *out)
+{
+	struct sha512_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+	struct nx_sg *in_sg, *out_sg;
+	u64 count0;
+	int rc;
+
+	if (NX_CPB_FDM(csbcpb) & NX_FDM_CONTINUATION) {
+		/* we've hit the nx chip previously, now we're finalizing,
+		 * so copy over the partial digest */
+		memcpy(csbcpb->cpb.sha512.input_partial_digest,
+		       csbcpb->cpb.sha512.message_digest, SHA512_DIGEST_SIZE);
+	}
+
+	/* final is represented by continuing the operation and indicating that
+	 * this is not an intermediate operation */
+	NX_CPB_FDM(csbcpb) &= ~NX_FDM_INTERMEDIATE;
+
+	count0 = sctx->count[0] * 8;
+
+	csbcpb->cpb.sha512.message_bit_length_lo += count0;
+	if (csbcpb->cpb.sha512.message_bit_length_lo < count0)
+		csbcpb->cpb.sha512.message_bit_length_hi++;
+
+	in_sg = nx_build_sg_list(nx_ctx->in_sg, sctx->buf, sctx->count[0],
+				 nx_ctx->ap->sglen);
+	out_sg = nx_build_sg_list(nx_ctx->out_sg, out, SHA512_DIGEST_SIZE,
+				  nx_ctx->ap->sglen);
+	nx_ctx->op.inlen = (nx_ctx->in_sg - in_sg) * sizeof(struct nx_sg);
+	nx_ctx->op.outlen = (nx_ctx->out_sg - out_sg) * sizeof(struct nx_sg);
+
+	if (!nx_ctx->op.outlen) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	rc = nx_hcall_sync(nx_ctx, &nx_ctx->op,
+			   desc->flags & CRYPTO_TFM_REQ_MAY_SLEEP);
+	if (rc)
+		goto out;
+
+	atomic_inc(&(nx_ctx->stats->sha512_ops));
+	atomic64_add(csbcpb->cpb.sha512.message_bit_length_lo,
+		     &(nx_ctx->stats->sha512_bytes));
+
+	memcpy(out, csbcpb->cpb.sha512.message_digest, SHA512_DIGEST_SIZE);
+out:
+	return rc;
+}
+
+static int nx_sha512_export(struct shash_desc *desc, void *out)
+{
+	struct sha512_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+	struct sha512_state *octx = out;
+
+	/* move message_bit_length (128 bits) into count and convert its value
+	 * to bytes */
+	octx->count[0] = csbcpb->cpb.sha512.message_bit_length_lo >> 3 |
+			 ((csbcpb->cpb.sha512.message_bit_length_hi & 7) << 61);
+	octx->count[1] = csbcpb->cpb.sha512.message_bit_length_hi >> 3;
+
+	octx->count[0] += sctx->count[0];
+	if (octx->count[0] < sctx->count[0])
+		octx->count[1]++;
+
+	memcpy(octx->buf, sctx->buf, sizeof(octx->buf));
+
+	/* if no data has been processed yet, we need to export SHA512's
+	 * initial data, in case this context gets imported into a software
+	 * context */
+	if (csbcpb->cpb.sha512.message_bit_length_hi ||
+	    csbcpb->cpb.sha512.message_bit_length_lo)
+		memcpy(octx->state, csbcpb->cpb.sha512.message_digest,
+		       SHA512_DIGEST_SIZE);
+	else {
+		octx->state[0] = SHA512_H0;
+		octx->state[1] = SHA512_H1;
+		octx->state[2] = SHA512_H2;
+		octx->state[3] = SHA512_H3;
+		octx->state[4] = SHA512_H4;
+		octx->state[5] = SHA512_H5;
+		octx->state[6] = SHA512_H6;
+		octx->state[7] = SHA512_H7;
+	}
+
+	return 0;
+}
+
+static int nx_sha512_import(struct shash_desc *desc, const void *in)
+{
+	struct sha512_state *sctx = shash_desc_ctx(desc);
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(&desc->tfm->base);
+	struct nx_csbcpb *csbcpb = (struct nx_csbcpb *)nx_ctx->csbcpb;
+	const struct sha512_state *ictx = in;
+
+	memcpy(sctx->buf, ictx->buf, sizeof(ictx->buf));
+	sctx->count[0] = ictx->count[0] & 0x3f;
+	csbcpb->cpb.sha512.message_bit_length_lo = (ictx->count[0] & ~0x3f)
+							<< 3;
+	csbcpb->cpb.sha512.message_bit_length_hi = ictx->count[1] << 3 |
+						   ictx->count[0] >> 61;
+
+	if (csbcpb->cpb.sha512.message_bit_length_hi ||
+	    csbcpb->cpb.sha512.message_bit_length_lo) {
+		memcpy(csbcpb->cpb.sha512.message_digest, ictx->state,
+		       SHA512_DIGEST_SIZE);
+
+		NX_CPB_FDM(csbcpb) |= NX_FDM_CONTINUATION;
+		NX_CPB_FDM(csbcpb) |= NX_FDM_INTERMEDIATE;
+	}
+
+	return 0;
+}
+
+struct shash_alg nx_shash_sha512_alg = {
+	.digestsize = SHA512_DIGEST_SIZE,
+	.init       = nx_sha512_init,
+	.update     = nx_sha512_update,
+	.final      = nx_sha512_final,
+	.export     = nx_sha512_export,
+	.import     = nx_sha512_import,
+	.descsize   = sizeof(struct sha512_state),
+	.statesize  = sizeof(struct sha512_state),
+	.base       = {
+		.cra_name        = "sha512",
+		.cra_driver_name = "sha512-nx",
+		.cra_priority    = 300,
+		.cra_flags       = CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize   = SHA512_BLOCK_SIZE,
+		.cra_module      = THIS_MODULE,
+		.cra_ctxsize     = sizeof(struct nx_crypto_ctx),
+		.cra_init        = nx_crypto_ctx_sha_init,
+		.cra_exit        = nx_crypto_ctx_exit,
+	}
+};
diff --git a/drivers/crypto/nx/nx.c b/drivers/crypto/nx/nx.c
new file mode 100644
index 000000000000..d7f179cc2e98
--- /dev/null
+++ b/drivers/crypto/nx/nx.c
@@ -0,0 +1,716 @@
+/**
+ * Routines supporting the Power 7+ Nest Accelerators driver
+ *
+ * Copyright (C) 2011-2012 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Kent Yoder <yoder1@us.ibm.com>
+ */
+
+#include <crypto/internal/hash.h>
+#include <crypto/hash.h>
+#include <crypto/aes.h>
+#include <crypto/sha.h>
+#include <crypto/algapi.h>
+#include <crypto/scatterwalk.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/crypto.h>
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <asm/pSeries_reconfig.h>
+#include <asm/abs_addr.h>
+#include <asm/hvcall.h>
+#include <asm/vio.h>
+
+#include "nx_csbcpb.h"
+#include "nx.h"
+
+
+/**
+ * nx_hcall_sync - make an H_COP_OP hcall for the passed in op structure
+ *
+ * @nx_ctx: the crypto context handle
+ * @op: PFO operation struct to pass in
+ * @may_sleep: flag indicating the request can sleep
+ *
+ * Make the hcall, retrying while the hardware is busy. If we cannot yield
+ * the thread, limit the number of retries to 10 here.
+ */
+int nx_hcall_sync(struct nx_crypto_ctx *nx_ctx,
+		  struct vio_pfo_op    *op,
+		  u32                   may_sleep)
+{
+	int rc, retries = 10;
+	struct vio_dev *viodev = nx_driver.viodev;
+
+	atomic_inc(&(nx_ctx->stats->sync_ops));
+
+	do {
+		rc = vio_h_cop_sync(viodev, op);
+	} while ((rc == -EBUSY && !may_sleep && retries--) ||
+	         (rc == -EBUSY && may_sleep && cond_resched()));
+
+	if (rc) {
+		dev_dbg(&viodev->dev, "vio_h_cop_sync failed: rc: %d "
+			"hcall rc: %ld\n", rc, op->hcall_err);
+		atomic_inc(&(nx_ctx->stats->errors));
+		atomic_set(&(nx_ctx->stats->last_error), op->hcall_err);
+		atomic_set(&(nx_ctx->stats->last_error_pid), current->pid);
+	}
+
+	return rc;
+}
+
+/**
+ * nx_build_sg_list - build an NX scatter list describing a single  buffer
+ *
+ * @sg_head: pointer to the first scatter list element to build
+ * @start_addr: pointer to the linear buffer
+ * @len: length of the data at @start_addr
+ * @sgmax: the largest number of scatter list elements we're allowed to create
+ *
+ * This function will start writing nx_sg elements at @sg_head and keep
+ * writing them until all of the data from @start_addr is described or
+ * until sgmax elements have been written. Scatter list elements will be
+ * created such that none of the elements describes a buffer that crosses a 4K
+ * boundary.
+ */
+struct nx_sg *nx_build_sg_list(struct nx_sg *sg_head,
+			       u8           *start_addr,
+			       unsigned int  len,
+			       u32           sgmax)
+{
+	unsigned int sg_len = 0;
+	struct nx_sg *sg;
+	u64 sg_addr = (u64)start_addr;
+	u64 end_addr;
+
+	/* determine the start and end for this address range - slightly
+	 * different if this is in VMALLOC_REGION */
+	if (is_vmalloc_addr(start_addr))
+		sg_addr = phys_to_abs(page_to_phys(vmalloc_to_page(start_addr)))
+			  + offset_in_page(sg_addr);
+	else
+		sg_addr = virt_to_abs(sg_addr);
+
+	end_addr = sg_addr + len;
+
+	/* each iteration will write one struct nx_sg element and add the
+	 * length of data described by that element to sg_len. Once @len bytes
+	 * have been described (or @sgmax elements have been written), the
+	 * loop ends. min_t is used to ensure @end_addr falls on the same page
+	 * as sg_addr, if not, we need to create another nx_sg element for the
+	 * data on the next page */
+	for (sg = sg_head; sg_len < len; sg++) {
+		sg->addr = sg_addr;
+		sg_addr = min_t(u64, NX_PAGE_NUM(sg_addr + NX_PAGE_SIZE), end_addr);
+		sg->len = sg_addr - sg->addr;
+		sg_len += sg->len;
+
+		if ((sg - sg_head) == sgmax) {
+			pr_err("nx: scatter/gather list overflow, pid: %d\n",
+			       current->pid);
+			return NULL;
+		}
+	}
+
+	/* return the moved sg_head pointer */
+	return sg;
+}
+
+/**
+ * nx_walk_and_build - walk a linux scatterlist and build an nx scatterlist
+ *
+ * @nx_dst: pointer to the first nx_sg element to write
+ * @sglen: max number of nx_sg entries we're allowed to write
+ * @sg_src: pointer to the source linux scatterlist to walk
+ * @start: number of bytes to fast-forward past at the beginning of @sg_src
+ * @src_len: number of bytes to walk in @sg_src
+ */
+struct nx_sg *nx_walk_and_build(struct nx_sg       *nx_dst,
+				unsigned int        sglen,
+				struct scatterlist *sg_src,
+				unsigned int        start,
+				unsigned int        src_len)
+{
+	struct scatter_walk walk;
+	struct nx_sg *nx_sg = nx_dst;
+	unsigned int n, offset = 0, len = src_len;
+	char *dst;
+
+	/* we need to fast forward through @start bytes first */
+	for (;;) {
+		scatterwalk_start(&walk, sg_src);
+
+		if (start < offset + sg_src->length)
+			break;
+
+		offset += sg_src->length;
+		sg_src = scatterwalk_sg_next(sg_src);
+	}
+
+	/* start - offset is the number of bytes to advance in the scatterlist
+	 * element we're currently looking at */
+	scatterwalk_advance(&walk, start - offset);
+
+	while (len && nx_sg) {
+		n = scatterwalk_clamp(&walk, len);
+		if (!n) {
+			scatterwalk_start(&walk, sg_next(walk.sg));
+			n = scatterwalk_clamp(&walk, len);
+		}
+		dst = scatterwalk_map(&walk);
+
+		nx_sg = nx_build_sg_list(nx_sg, dst, n, sglen);
+		len -= n;
+
+		scatterwalk_unmap(dst);
+		scatterwalk_advance(&walk, n);
+		scatterwalk_done(&walk, SCATTERWALK_FROM_SG, len);
+	}
+
+	/* return the moved destination pointer */
+	return nx_sg;
+}
+
+/**
+ * nx_build_sg_lists - walk the input scatterlists and build arrays of NX
+ *                     scatterlists based on them.
+ *
+ * @nx_ctx: NX crypto context for the lists we're building
+ * @desc: the block cipher descriptor for the operation
+ * @dst: destination scatterlist
+ * @src: source scatterlist
+ * @nbytes: length of data described in the scatterlists
+ * @iv: destination for the iv data, if the algorithm requires it
+ *
+ * This is common code shared by all the AES algorithms. It uses the block
+ * cipher walk routines to traverse input and output scatterlists, building
+ * corresponding NX scatterlists
+ */
+int nx_build_sg_lists(struct nx_crypto_ctx  *nx_ctx,
+		      struct blkcipher_desc *desc,
+		      struct scatterlist    *dst,
+		      struct scatterlist    *src,
+		      unsigned int           nbytes,
+		      u8                    *iv)
+{
+	struct nx_sg *nx_insg = nx_ctx->in_sg;
+	struct nx_sg *nx_outsg = nx_ctx->out_sg;
+	struct blkcipher_walk walk;
+	int rc;
+
+	blkcipher_walk_init(&walk, dst, src, nbytes);
+	rc = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE);
+	if (rc)
+		goto out;
+
+	if (iv)
+		memcpy(iv, walk.iv, AES_BLOCK_SIZE);
+
+	while (walk.nbytes) {
+		nx_insg = nx_build_sg_list(nx_insg, walk.src.virt.addr,
+					   walk.nbytes, nx_ctx->ap->sglen);
+		nx_outsg = nx_build_sg_list(nx_outsg, walk.dst.virt.addr,
+					    walk.nbytes, nx_ctx->ap->sglen);
+
+		rc = blkcipher_walk_done(desc, &walk, 0);
+		if (rc)
+			break;
+	}
+
+	if (walk.nbytes) {
+		nx_insg = nx_build_sg_list(nx_insg, walk.src.virt.addr,
+					   walk.nbytes, nx_ctx->ap->sglen);
+		nx_outsg = nx_build_sg_list(nx_outsg, walk.dst.virt.addr,
+					    walk.nbytes, nx_ctx->ap->sglen);
+
+		rc = 0;
+	}
+
+	/* these lengths should be negative, which will indicate to phyp that
+	 * the input and output parameters are scatterlists, not linear
+	 * buffers */
+	nx_ctx->op.inlen = (nx_ctx->in_sg - nx_insg) * sizeof(struct nx_sg);
+	nx_ctx->op.outlen = (nx_ctx->out_sg - nx_outsg) * sizeof(struct nx_sg);
+out:
+	return rc;
+}
+
+/**
+ * nx_ctx_init - initialize an nx_ctx's vio_pfo_op struct
+ *
+ * @nx_ctx: the nx context to initialize
+ * @function: the function code for the op
+ */
+void nx_ctx_init(struct nx_crypto_ctx *nx_ctx, unsigned int function)
+{
+	memset(nx_ctx->kmem, 0, nx_ctx->kmem_len);
+	nx_ctx->csbcpb->csb.valid |= NX_CSB_VALID_BIT;
+
+	nx_ctx->op.flags = function;
+	nx_ctx->op.csbcpb = virt_to_abs(nx_ctx->csbcpb);
+	nx_ctx->op.in = virt_to_abs(nx_ctx->in_sg);
+	nx_ctx->op.out = virt_to_abs(nx_ctx->out_sg);
+
+	if (nx_ctx->csbcpb_aead) {
+		nx_ctx->csbcpb_aead->csb.valid |= NX_CSB_VALID_BIT;
+
+		nx_ctx->op_aead.flags = function;
+		nx_ctx->op_aead.csbcpb = virt_to_abs(nx_ctx->csbcpb_aead);
+		nx_ctx->op_aead.in = virt_to_abs(nx_ctx->in_sg);
+		nx_ctx->op_aead.out = virt_to_abs(nx_ctx->out_sg);
+	}
+}
+
+static void nx_of_update_status(struct device   *dev,
+			       struct property *p,
+			       struct nx_of    *props)
+{
+	if (!strncmp(p->value, "okay", p->length)) {
+		props->status = NX_WAITING;
+		props->flags |= NX_OF_FLAG_STATUS_SET;
+	} else {
+		dev_info(dev, "%s: status '%s' is not 'okay'\n", __func__,
+			 (char *)p->value);
+	}
+}
+
+static void nx_of_update_sglen(struct device   *dev,
+			       struct property *p,
+			       struct nx_of    *props)
+{
+	if (p->length != sizeof(props->max_sg_len)) {
+		dev_err(dev, "%s: unexpected format for "
+			"ibm,max-sg-len property\n", __func__);
+		dev_dbg(dev, "%s: ibm,max-sg-len is %d bytes "
+			"long, expected %zd bytes\n", __func__,
+			p->length, sizeof(props->max_sg_len));
+		return;
+	}
+
+	props->max_sg_len = *(u32 *)p->value;
+	props->flags |= NX_OF_FLAG_MAXSGLEN_SET;
+}
+
+static void nx_of_update_msc(struct device   *dev,
+			     struct property *p,
+			     struct nx_of    *props)
+{
+	struct msc_triplet *trip;
+	struct max_sync_cop *msc;
+	unsigned int bytes_so_far, i, lenp;
+
+	msc = (struct max_sync_cop *)p->value;
+	lenp = p->length;
+
+	/* You can't tell if the data read in for this property is sane by its
+	 * size alone. This is because there are sizes embedded in the data
+	 * structure. The best we can do is check lengths as we parse and bail
+	 * as soon as a length error is detected. */
+	bytes_so_far = 0;
+
+	while ((bytes_so_far + sizeof(struct max_sync_cop)) <= lenp) {
+		bytes_so_far += sizeof(struct max_sync_cop);
+
+		trip = msc->trip;
+
+		for (i = 0;
+		     ((bytes_so_far + sizeof(struct msc_triplet)) <= lenp) &&
+		     i < msc->triplets;
+		     i++) {
+			if (msc->fc > NX_MAX_FC || msc->mode > NX_MAX_MODE) {
+				dev_err(dev, "unknown function code/mode "
+					"combo: %d/%d (ignored)\n", msc->fc,
+					msc->mode);
+				goto next_loop;
+			}
+
+			switch (trip->keybitlen) {
+			case 128:
+			case 160:
+				props->ap[msc->fc][msc->mode][0].databytelen =
+					trip->databytelen;
+				props->ap[msc->fc][msc->mode][0].sglen =
+					trip->sglen;
+				break;
+			case 192:
+				props->ap[msc->fc][msc->mode][1].databytelen =
+					trip->databytelen;
+				props->ap[msc->fc][msc->mode][1].sglen =
+					trip->sglen;
+				break;
+			case 256:
+				if (msc->fc == NX_FC_AES) {
+					props->ap[msc->fc][msc->mode][2].
+						databytelen = trip->databytelen;
+					props->ap[msc->fc][msc->mode][2].sglen =
+						trip->sglen;
+				} else if (msc->fc == NX_FC_AES_HMAC ||
+					   msc->fc == NX_FC_SHA) {
+					props->ap[msc->fc][msc->mode][1].
+						databytelen = trip->databytelen;
+					props->ap[msc->fc][msc->mode][1].sglen =
+						trip->sglen;
+				} else {
+					dev_warn(dev, "unknown function "
+						"code/key bit len combo"
+						": (%u/256)\n", msc->fc);
+				}
+				break;
+			case 512:
+				props->ap[msc->fc][msc->mode][2].databytelen =
+					trip->databytelen;
+				props->ap[msc->fc][msc->mode][2].sglen =
+					trip->sglen;
+				break;
+			default:
+				dev_warn(dev, "unknown function code/key bit "
+					 "len combo: (%u/%u)\n", msc->fc,
+					 trip->keybitlen);
+				break;
+			}
+next_loop:
+			bytes_so_far += sizeof(struct msc_triplet);
+			trip++;
+		}
+
+		msc = (struct max_sync_cop *)trip;
+	}
+
+	props->flags |= NX_OF_FLAG_MAXSYNCCOP_SET;
+}
+
+/**
+ * nx_of_init - read openFirmware values from the device tree
+ *
+ * @dev: device handle
+ * @props: pointer to struct to hold the properties values
+ *
+ * Called once at driver probe time, this function will read out the
+ * openFirmware properties we use at runtime. If all the OF properties are
+ * acceptable, when we exit this function props->flags will indicate that
+ * we're ready to register our crypto algorithms.
+ */
+static void nx_of_init(struct device *dev, struct nx_of *props)
+{
+	struct device_node *base_node = dev->of_node;
+	struct property *p;
+
+	p = of_find_property(base_node, "status", NULL);
+	if (!p)
+		dev_info(dev, "%s: property 'status' not found\n", __func__);
+	else
+		nx_of_update_status(dev, p, props);
+
+	p = of_find_property(base_node, "ibm,max-sg-len", NULL);
+	if (!p)
+		dev_info(dev, "%s: property 'ibm,max-sg-len' not found\n",
+			 __func__);
+	else
+		nx_of_update_sglen(dev, p, props);
+
+	p = of_find_property(base_node, "ibm,max-sync-cop", NULL);
+	if (!p)
+		dev_info(dev, "%s: property 'ibm,max-sync-cop' not found\n",
+			 __func__);
+	else
+		nx_of_update_msc(dev, p, props);
+}
+
+/**
+ * nx_register_algs - register algorithms with the crypto API
+ *
+ * Called from nx_probe()
+ *
+ * If all OF properties are in an acceptable state, the driver flags will
+ * indicate that we're ready and we'll create our debugfs files and register
+ * out crypto algorithms.
+ */
+static int nx_register_algs(void)
+{
+	int rc = -1;
+
+	if (nx_driver.of.flags != NX_OF_FLAG_MASK_READY)
+		goto out;
+
+	memset(&nx_driver.stats, 0, sizeof(struct nx_stats));
+
+	rc = NX_DEBUGFS_INIT(&nx_driver);
+	if (rc)
+		goto out;
+
+	rc = crypto_register_alg(&nx_ecb_aes_alg);
+	if (rc)
+		goto out;
+
+	rc = crypto_register_alg(&nx_cbc_aes_alg);
+	if (rc)
+		goto out_unreg_ecb;
+
+	rc = crypto_register_alg(&nx_ctr_aes_alg);
+	if (rc)
+		goto out_unreg_cbc;
+
+	rc = crypto_register_alg(&nx_ctr3686_aes_alg);
+	if (rc)
+		goto out_unreg_ctr;
+
+	rc = crypto_register_alg(&nx_gcm_aes_alg);
+	if (rc)
+		goto out_unreg_ctr3686;
+
+	rc = crypto_register_alg(&nx_gcm4106_aes_alg);
+	if (rc)
+		goto out_unreg_gcm;
+
+	rc = crypto_register_alg(&nx_ccm_aes_alg);
+	if (rc)
+		goto out_unreg_gcm4106;
+
+	rc = crypto_register_alg(&nx_ccm4309_aes_alg);
+	if (rc)
+		goto out_unreg_ccm;
+
+	rc = crypto_register_shash(&nx_shash_sha256_alg);
+	if (rc)
+		goto out_unreg_ccm4309;
+
+	rc = crypto_register_shash(&nx_shash_sha512_alg);
+	if (rc)
+		goto out_unreg_s256;
+
+	rc = crypto_register_shash(&nx_shash_aes_xcbc_alg);
+	if (rc)
+		goto out_unreg_s512;
+
+	nx_driver.of.status = NX_OKAY;
+
+	goto out;
+
+out_unreg_s512:
+	crypto_unregister_shash(&nx_shash_sha512_alg);
+out_unreg_s256:
+	crypto_unregister_shash(&nx_shash_sha256_alg);
+out_unreg_ccm4309:
+	crypto_unregister_alg(&nx_ccm4309_aes_alg);
+out_unreg_ccm:
+	crypto_unregister_alg(&nx_ccm_aes_alg);
+out_unreg_gcm4106:
+	crypto_unregister_alg(&nx_gcm4106_aes_alg);
+out_unreg_gcm:
+	crypto_unregister_alg(&nx_gcm_aes_alg);
+out_unreg_ctr3686:
+	crypto_unregister_alg(&nx_ctr3686_aes_alg);
+out_unreg_ctr:
+	crypto_unregister_alg(&nx_ctr_aes_alg);
+out_unreg_cbc:
+	crypto_unregister_alg(&nx_cbc_aes_alg);
+out_unreg_ecb:
+	crypto_unregister_alg(&nx_ecb_aes_alg);
+out:
+	return rc;
+}
+
+/**
+ * nx_crypto_ctx_init - create and initialize a crypto api context
+ *
+ * @nx_ctx: the crypto api context
+ * @fc: function code for the context
+ * @mode: the function code specific mode for this context
+ */
+static int nx_crypto_ctx_init(struct nx_crypto_ctx *nx_ctx, u32 fc, u32 mode)
+{
+	if (nx_driver.of.status != NX_OKAY) {
+		pr_err("Attempt to initialize NX crypto context while device "
+		       "is not available!\n");
+		return -ENODEV;
+	}
+
+	/* we need an extra page for csbcpb_aead for these modes */
+	if (mode == NX_MODE_AES_GCM || mode == NX_MODE_AES_CCM)
+		nx_ctx->kmem_len = (4 * NX_PAGE_SIZE) +
+				   sizeof(struct nx_csbcpb);
+	else
+		nx_ctx->kmem_len = (3 * NX_PAGE_SIZE) +
+				   sizeof(struct nx_csbcpb);
+
+	nx_ctx->kmem = kmalloc(nx_ctx->kmem_len, GFP_KERNEL);
+	if (!nx_ctx->kmem)
+		return -ENOMEM;
+
+	/* the csbcpb and scatterlists must be 4K aligned pages */
+	nx_ctx->csbcpb = (struct nx_csbcpb *)(round_up((u64)nx_ctx->kmem,
+						       (u64)NX_PAGE_SIZE));
+	nx_ctx->in_sg = (struct nx_sg *)((u8 *)nx_ctx->csbcpb + NX_PAGE_SIZE);
+	nx_ctx->out_sg = (struct nx_sg *)((u8 *)nx_ctx->in_sg + NX_PAGE_SIZE);
+
+	if (mode == NX_MODE_AES_GCM || mode == NX_MODE_AES_CCM)
+		nx_ctx->csbcpb_aead =
+			(struct nx_csbcpb *)((u8 *)nx_ctx->out_sg +
+					     NX_PAGE_SIZE);
+
+	/* give each context a pointer to global stats and their OF
+	 * properties */
+	nx_ctx->stats = &nx_driver.stats;
+	memcpy(nx_ctx->props, nx_driver.of.ap[fc][mode],
+	       sizeof(struct alg_props) * 3);
+
+	return 0;
+}
+
+/* entry points from the crypto tfm initializers */
+int nx_crypto_ctx_aes_ccm_init(struct crypto_tfm *tfm)
+{
+	return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_AES,
+				  NX_MODE_AES_CCM);
+}
+
+int nx_crypto_ctx_aes_gcm_init(struct crypto_tfm *tfm)
+{
+	return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_AES,
+				  NX_MODE_AES_GCM);
+}
+
+int nx_crypto_ctx_aes_ctr_init(struct crypto_tfm *tfm)
+{
+	return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_AES,
+				  NX_MODE_AES_CTR);
+}
+
+int nx_crypto_ctx_aes_cbc_init(struct crypto_tfm *tfm)
+{
+	return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_AES,
+				  NX_MODE_AES_CBC);
+}
+
+int nx_crypto_ctx_aes_ecb_init(struct crypto_tfm *tfm)
+{
+	return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_AES,
+				  NX_MODE_AES_ECB);
+}
+
+int nx_crypto_ctx_sha_init(struct crypto_tfm *tfm)
+{
+	return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_SHA, NX_MODE_SHA);
+}
+
+int nx_crypto_ctx_aes_xcbc_init(struct crypto_tfm *tfm)
+{
+	return nx_crypto_ctx_init(crypto_tfm_ctx(tfm), NX_FC_AES,
+				  NX_MODE_AES_XCBC_MAC);
+}
+
+/**
+ * nx_crypto_ctx_exit - destroy a crypto api context
+ *
+ * @tfm: the crypto transform pointer for the context
+ *
+ * As crypto API contexts are destroyed, this exit hook is called to free the
+ * memory associated with it.
+ */
+void nx_crypto_ctx_exit(struct crypto_tfm *tfm)
+{
+	struct nx_crypto_ctx *nx_ctx = crypto_tfm_ctx(tfm);
+
+	kzfree(nx_ctx->kmem);
+	nx_ctx->csbcpb = NULL;
+	nx_ctx->csbcpb_aead = NULL;
+	nx_ctx->in_sg = NULL;
+	nx_ctx->out_sg = NULL;
+}
+
+static int __devinit nx_probe(struct vio_dev *viodev,
+			      const struct vio_device_id *id)
+{
+	dev_dbg(&viodev->dev, "driver probed: %s resource id: 0x%x\n",
+		viodev->name, viodev->resource_id);
+
+	if (nx_driver.viodev) {
+		dev_err(&viodev->dev, "%s: Attempt to register more than one "
+			"instance of the hardware\n", __func__);
+		return -EINVAL;
+	}
+
+	nx_driver.viodev = viodev;
+
+	nx_of_init(&viodev->dev, &nx_driver.of);
+
+	return nx_register_algs();
+}
+
+static int __devexit nx_remove(struct vio_dev *viodev)
+{
+	dev_dbg(&viodev->dev, "entering nx_remove for UA 0x%x\n",
+		viodev->unit_address);
+
+	if (nx_driver.of.status == NX_OKAY) {
+		NX_DEBUGFS_FINI(&nx_driver);
+
+		crypto_unregister_alg(&nx_ccm_aes_alg);
+		crypto_unregister_alg(&nx_ccm4309_aes_alg);
+		crypto_unregister_alg(&nx_gcm_aes_alg);
+		crypto_unregister_alg(&nx_gcm4106_aes_alg);
+		crypto_unregister_alg(&nx_ctr_aes_alg);
+		crypto_unregister_alg(&nx_ctr3686_aes_alg);
+		crypto_unregister_alg(&nx_cbc_aes_alg);
+		crypto_unregister_alg(&nx_ecb_aes_alg);
+		crypto_unregister_shash(&nx_shash_sha256_alg);
+		crypto_unregister_shash(&nx_shash_sha512_alg);
+		crypto_unregister_shash(&nx_shash_aes_xcbc_alg);
+	}
+
+	return 0;
+}
+
+
+/* module wide initialization/cleanup */
+static int __init nx_init(void)
+{
+	return vio_register_driver(&nx_driver.viodriver);
+}
+
+static void __exit nx_fini(void)
+{
+	vio_unregister_driver(&nx_driver.viodriver);
+}
+
+static struct vio_device_id nx_crypto_driver_ids[] __devinitdata = {
+	{ "ibm,sym-encryption-v1", "ibm,sym-encryption" },
+	{ "", "" }
+};
+MODULE_DEVICE_TABLE(vio, nx_crypto_driver_ids);
+
+/* driver state structure */
+struct nx_crypto_driver nx_driver = {
+	.viodriver = {
+		.id_table = nx_crypto_driver_ids,
+		.probe = nx_probe,
+		.remove = nx_remove,
+		.name  = NX_NAME,
+	},
+};
+
+module_init(nx_init);
+module_exit(nx_fini);
+
+MODULE_AUTHOR("Kent Yoder <yoder1@us.ibm.com>");
+MODULE_DESCRIPTION(NX_STRING);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(NX_VERSION);
diff --git a/drivers/crypto/nx/nx.h b/drivers/crypto/nx/nx.h
new file mode 100644
index 000000000000..3232b182dd28
--- /dev/null
+++ b/drivers/crypto/nx/nx.h
@@ -0,0 +1,193 @@
+
+#ifndef __NX_H__
+#define __NX_H__
+
+#define NX_NAME		"nx-crypto"
+#define NX_STRING	"IBM Power7+ Nest Accelerator Crypto Driver"
+#define NX_VERSION	"1.0"
+
+static const char nx_driver_string[] = NX_STRING;
+static const char nx_driver_version[] = NX_VERSION;
+
+/* a scatterlist in the format PHYP is expecting */
+struct nx_sg {
+	u64 addr;
+	u32 rsvd;
+	u32 len;
+} __attribute((packed));
+
+#define NX_PAGE_SIZE		(4096)
+#define NX_MAX_SG_ENTRIES	(NX_PAGE_SIZE/(sizeof(struct nx_sg)))
+
+enum nx_status {
+	NX_DISABLED,
+	NX_WAITING,
+	NX_OKAY
+};
+
+/* msc_triplet and max_sync_cop are used only to assist in parsing the
+ * openFirmware property */
+struct msc_triplet {
+	u32 keybitlen;
+	u32 databytelen;
+	u32 sglen;
+} __packed;
+
+struct max_sync_cop {
+	u32 fc;
+	u32 mode;
+	u32 triplets;
+	struct msc_triplet trip[0];
+} __packed;
+
+struct alg_props {
+	u32 databytelen;
+	u32 sglen;
+};
+
+#define NX_OF_FLAG_MAXSGLEN_SET		(1)
+#define NX_OF_FLAG_STATUS_SET		(2)
+#define NX_OF_FLAG_MAXSYNCCOP_SET	(4)
+#define NX_OF_FLAG_MASK_READY		(NX_OF_FLAG_MAXSGLEN_SET | \
+					 NX_OF_FLAG_STATUS_SET |   \
+					 NX_OF_FLAG_MAXSYNCCOP_SET)
+struct nx_of {
+	u32 flags;
+	u32 max_sg_len;
+	enum nx_status status;
+	struct alg_props ap[NX_MAX_FC][NX_MAX_MODE][3];
+};
+
+struct nx_stats {
+	atomic_t aes_ops;
+	atomic64_t aes_bytes;
+	atomic_t sha256_ops;
+	atomic64_t sha256_bytes;
+	atomic_t sha512_ops;
+	atomic64_t sha512_bytes;
+
+	atomic_t sync_ops;
+
+	atomic_t errors;
+	atomic_t last_error;
+	atomic_t last_error_pid;
+};
+
+struct nx_debugfs {
+	struct dentry *dfs_root;
+	struct dentry *dfs_aes_ops, *dfs_aes_bytes;
+	struct dentry *dfs_sha256_ops, *dfs_sha256_bytes;
+	struct dentry *dfs_sha512_ops, *dfs_sha512_bytes;
+	struct dentry *dfs_errors, *dfs_last_error, *dfs_last_error_pid;
+};
+
+struct nx_crypto_driver {
+	struct nx_stats    stats;
+	struct nx_of       of;
+	struct vio_dev    *viodev;
+	struct vio_driver  viodriver;
+	struct nx_debugfs  dfs;
+};
+
+#define NX_GCM4106_NONCE_LEN		(4)
+#define NX_GCM_CTR_OFFSET		(12)
+struct nx_gcm_priv {
+	u8 iv[16];
+	u8 iauth_tag[16];
+	u8 nonce[NX_GCM4106_NONCE_LEN];
+};
+
+#define NX_CCM_AES_KEY_LEN		(16)
+#define NX_CCM4309_AES_KEY_LEN		(19)
+#define NX_CCM4309_NONCE_LEN		(3)
+struct nx_ccm_priv {
+	u8 iv[16];
+	u8 b0[16];
+	u8 iauth_tag[16];
+	u8 oauth_tag[16];
+	u8 nonce[NX_CCM4309_NONCE_LEN];
+};
+
+struct nx_xcbc_priv {
+	u8 key[16];
+};
+
+struct nx_ctr_priv {
+	u8 iv[16];
+};
+
+struct nx_crypto_ctx {
+	void *kmem;		  /* unaligned, kmalloc'd buffer */
+	size_t kmem_len;	  /* length of kmem */
+	struct nx_csbcpb *csbcpb; /* aligned page given to phyp @ hcall time */
+	struct vio_pfo_op op;     /* operation struct with hcall parameters */
+	struct nx_csbcpb *csbcpb_aead; /* secondary csbcpb used by AEAD algs */
+	struct vio_pfo_op op_aead;/* operation struct for csbcpb_aead */
+
+	struct nx_sg *in_sg;      /* aligned pointer into kmem to an sg list */
+	struct nx_sg *out_sg;     /* aligned pointer into kmem to an sg list */
+
+	struct alg_props *ap;	  /* pointer into props based on our key size */
+	struct alg_props props[3];/* openFirmware properties for requests */
+	struct nx_stats *stats;   /* pointer into an nx_crypto_driver for stats
+				     reporting */
+
+	union {
+		struct nx_gcm_priv gcm;
+		struct nx_ccm_priv ccm;
+		struct nx_xcbc_priv xcbc;
+		struct nx_ctr_priv ctr;
+	} priv;
+};
+
+/* prototypes */
+int nx_crypto_ctx_aes_ccm_init(struct crypto_tfm *tfm);
+int nx_crypto_ctx_aes_gcm_init(struct crypto_tfm *tfm);
+int nx_crypto_ctx_aes_xcbc_init(struct crypto_tfm *tfm);
+int nx_crypto_ctx_aes_ctr_init(struct crypto_tfm *tfm);
+int nx_crypto_ctx_aes_cbc_init(struct crypto_tfm *tfm);
+int nx_crypto_ctx_aes_ecb_init(struct crypto_tfm *tfm);
+int nx_crypto_ctx_sha_init(struct crypto_tfm *tfm);
+void nx_crypto_ctx_exit(struct crypto_tfm *tfm);
+void nx_ctx_init(struct nx_crypto_ctx *nx_ctx, unsigned int function);
+int nx_hcall_sync(struct nx_crypto_ctx *ctx, struct vio_pfo_op *op,
+		  u32 may_sleep);
+struct nx_sg *nx_build_sg_list(struct nx_sg *, u8 *, unsigned int, u32);
+int nx_build_sg_lists(struct nx_crypto_ctx *, struct blkcipher_desc *,
+		      struct scatterlist *, struct scatterlist *, unsigned int,
+		      u8 *);
+struct nx_sg *nx_walk_and_build(struct nx_sg *, unsigned int,
+				struct scatterlist *, unsigned int,
+				unsigned int);
+
+#ifdef CONFIG_DEBUG_FS
+#define NX_DEBUGFS_INIT(drv)	nx_debugfs_init(drv)
+#define NX_DEBUGFS_FINI(drv)	nx_debugfs_fini(drv)
+
+int nx_debugfs_init(struct nx_crypto_driver *);
+void nx_debugfs_fini(struct nx_crypto_driver *);
+#else
+#define NX_DEBUGFS_INIT(drv)	(0)
+#define NX_DEBUGFS_FINI(drv)	(0)
+#endif
+
+#define NX_PAGE_NUM(x)		((u64)(x) & 0xfffffffffffff000ULL)
+
+extern struct crypto_alg nx_cbc_aes_alg;
+extern struct crypto_alg nx_ecb_aes_alg;
+extern struct crypto_alg nx_gcm_aes_alg;
+extern struct crypto_alg nx_gcm4106_aes_alg;
+extern struct crypto_alg nx_ctr_aes_alg;
+extern struct crypto_alg nx_ctr3686_aes_alg;
+extern struct crypto_alg nx_ccm_aes_alg;
+extern struct crypto_alg nx_ccm4309_aes_alg;
+extern struct shash_alg nx_shash_aes_xcbc_alg;
+extern struct shash_alg nx_shash_sha512_alg;
+extern struct shash_alg nx_shash_sha256_alg;
+
+extern struct nx_crypto_driver nx_driver;
+
+#define SCATTERWALK_TO_SG	1
+#define SCATTERWALK_FROM_SG	0
+
+#endif
diff --git a/drivers/crypto/nx/nx_csbcpb.h b/drivers/crypto/nx/nx_csbcpb.h
new file mode 100644
index 000000000000..a304f956d6f8
--- /dev/null
+++ b/drivers/crypto/nx/nx_csbcpb.h
@@ -0,0 +1,205 @@
+
+#ifndef __NX_CSBCPB_H__
+#define __NX_CSBCPB_H__
+
+struct cop_symcpb_aes_ecb {
+	u8 key[32];
+	u8 __rsvd[80];
+} __packed;
+
+struct cop_symcpb_aes_cbc {
+	u8 iv[16];
+	u8 key[32];
+	u8 cv[16];
+	u32 spbc;
+	u8 __rsvd[44];
+} __packed;
+
+struct cop_symcpb_aes_gca {
+	u8 in_pat[16];
+	u8 key[32];
+	u8 out_pat[16];
+	u32 spbc;
+	u8 __rsvd[44];
+} __packed;
+
+struct cop_symcpb_aes_gcm {
+	u8 in_pat_or_aad[16];
+	u8 iv_or_cnt[16];
+	u64 bit_length_aad;
+	u64 bit_length_data;
+	u8 in_s0[16];
+	u8 key[32];
+	u8 __rsvd1[16];
+	u8 out_pat_or_mac[16];
+	u8 out_s0[16];
+	u8 out_cnt[16];
+	u32 spbc;
+	u8 __rsvd2[12];
+} __packed;
+
+struct cop_symcpb_aes_ctr {
+	u8 iv[16];
+	u8 key[32];
+	u8 cv[16];
+	u32 spbc;
+	u8 __rsvd2[44];
+} __packed;
+
+struct cop_symcpb_aes_cca {
+	u8 b0[16];
+	u8 b1[16];
+	u8 key[16];
+	u8 out_pat_or_b0[16];
+	u32 spbc;
+	u8 __rsvd[44];
+} __packed;
+
+struct cop_symcpb_aes_ccm {
+	u8 in_pat_or_b0[16];
+	u8 iv_or_ctr[16];
+	u8 in_s0[16];
+	u8 key[16];
+	u8 __rsvd1[48];
+	u8 out_pat_or_mac[16];
+	u8 out_s0[16];
+	u8 out_ctr[16];
+	u32 spbc;
+	u8 __rsvd2[12];
+} __packed;
+
+struct cop_symcpb_aes_xcbc {
+	u8 cv[16];
+	u8 key[16];
+	u8 __rsvd1[16];
+	u8 out_cv_mac[16];
+	u32 spbc;
+	u8 __rsvd2[44];
+} __packed;
+
+struct cop_symcpb_sha256 {
+	u64 message_bit_length;
+	u64 __rsvd1;
+	u8 input_partial_digest[32];
+	u8 message_digest[32];
+	u32 spbc;
+	u8 __rsvd2[44];
+} __packed;
+
+struct cop_symcpb_sha512 {
+	u64 message_bit_length_hi;
+	u64 message_bit_length_lo;
+	u8 input_partial_digest[64];
+	u8 __rsvd1[32];
+	u8 message_digest[64];
+	u32 spbc;
+	u8 __rsvd2[76];
+} __packed;
+
+#define NX_FDM_INTERMEDIATE		0x01
+#define NX_FDM_CONTINUATION		0x02
+#define NX_FDM_ENDE_ENCRYPT		0x80
+
+#define NX_CPB_FDM(c)			((c)->cpb.hdr.fdm)
+#define NX_CPB_KS_DS(c)			((c)->cpb.hdr.ks_ds)
+
+#define NX_CPB_KEY_SIZE(c)		(NX_CPB_KS_DS(c) >> 4)
+#define NX_CPB_SET_KEY_SIZE(c, x)	NX_CPB_KS_DS(c) |= ((x) << 4)
+#define NX_CPB_SET_DIGEST_SIZE(c, x)	NX_CPB_KS_DS(c) |= (x)
+
+struct cop_symcpb_header {
+	u8 mode;
+	u8 fdm;
+	u8 ks_ds;
+	u8 pad_byte;
+	u8 __rsvd[12];
+} __packed;
+
+struct cop_parameter_block {
+	struct cop_symcpb_header hdr;
+	union {
+		struct cop_symcpb_aes_ecb  aes_ecb;
+		struct cop_symcpb_aes_cbc  aes_cbc;
+		struct cop_symcpb_aes_gca  aes_gca;
+		struct cop_symcpb_aes_gcm  aes_gcm;
+		struct cop_symcpb_aes_cca  aes_cca;
+		struct cop_symcpb_aes_ccm  aes_ccm;
+		struct cop_symcpb_aes_ctr  aes_ctr;
+		struct cop_symcpb_aes_xcbc aes_xcbc;
+		struct cop_symcpb_sha256   sha256;
+		struct cop_symcpb_sha512   sha512;
+	};
+} __packed;
+
+#define NX_CSB_VALID_BIT	0x80
+
+/* co-processor status block */
+struct cop_status_block {
+	u8 valid;
+	u8 crb_seq_number;
+	u8 completion_code;
+	u8 completion_extension;
+	u32 processed_byte_count;
+	u64 address;
+} __packed;
+
+/* Nest accelerator workbook section 4.4 */
+struct nx_csbcpb {
+	unsigned char __rsvd[112];
+	struct cop_status_block csb;
+	struct cop_parameter_block cpb;
+} __packed;
+
+/* nx_csbcpb related definitions */
+#define NX_MODE_AES_ECB			0
+#define NX_MODE_AES_CBC			1
+#define NX_MODE_AES_GMAC		2
+#define NX_MODE_AES_GCA			3
+#define NX_MODE_AES_GCM			4
+#define NX_MODE_AES_CCA			5
+#define NX_MODE_AES_CCM			6
+#define NX_MODE_AES_CTR			7
+#define NX_MODE_AES_XCBC_MAC		20
+#define NX_MODE_SHA			0
+#define NX_MODE_SHA_HMAC		1
+#define NX_MODE_AES_CBC_HMAC_ETA	8
+#define NX_MODE_AES_CBC_HMAC_ATE	9
+#define NX_MODE_AES_CBC_HMAC_EAA	10
+#define NX_MODE_AES_CTR_HMAC_ETA	12
+#define NX_MODE_AES_CTR_HMAC_ATE	13
+#define NX_MODE_AES_CTR_HMAC_EAA	14
+
+#define NX_FDM_CI_FULL		0
+#define NX_FDM_CI_FIRST		1
+#define NX_FDM_CI_LAST		2
+#define NX_FDM_CI_MIDDLE	3
+
+#define NX_FDM_PR_NONE		0
+#define NX_FDM_PR_PAD		1
+
+#define NX_KS_AES_128		1
+#define NX_KS_AES_192		2
+#define NX_KS_AES_256		3
+
+#define NX_DS_SHA256		2
+#define NX_DS_SHA512		3
+
+#define NX_FC_AES		0
+#define NX_FC_SHA		2
+#define NX_FC_AES_HMAC		6
+
+#define NX_MAX_FC		(NX_FC_AES_HMAC + 1)
+#define NX_MAX_MODE		(NX_MODE_AES_XCBC_MAC + 1)
+
+#define HCOP_FC_AES          NX_FC_AES
+#define HCOP_FC_SHA          NX_FC_SHA
+#define HCOP_FC_AES_HMAC     NX_FC_AES_HMAC
+
+/* indices into the array of algorithm properties */
+#define NX_PROPS_AES_128		0
+#define NX_PROPS_AES_192		1
+#define NX_PROPS_AES_256		2
+#define NX_PROPS_SHA256			1
+#define NX_PROPS_SHA512			2
+
+#endif
diff --git a/drivers/crypto/nx/nx_debugfs.c b/drivers/crypto/nx/nx_debugfs.c
new file mode 100644
index 000000000000..7ab2e8dcd9b4
--- /dev/null
+++ b/drivers/crypto/nx/nx_debugfs.c
@@ -0,0 +1,103 @@
+/**
+ * debugfs routines supporting the Power 7+ Nest Accelerators driver
+ *
+ * Copyright (C) 2011-2012 International Business Machines Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 only.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Author: Kent Yoder <yoder1@us.ibm.com>
+ */
+
+#include <linux/device.h>
+#include <linux/kobject.h>
+#include <linux/string.h>
+#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/crypto.h>
+#include <crypto/hash.h>
+#include <asm/vio.h>
+
+#include "nx_csbcpb.h"
+#include "nx.h"
+
+#ifdef CONFIG_DEBUG_FS
+
+/*
+ * debugfs
+ *
+ * For documentation on these attributes, please see:
+ *
+ * Documentation/ABI/testing/debugfs-pfo-nx-crypto
+ */
+
+int nx_debugfs_init(struct nx_crypto_driver *drv)
+{
+	struct nx_debugfs *dfs = &drv->dfs;
+
+	dfs->dfs_root = debugfs_create_dir(NX_NAME, NULL);
+
+	dfs->dfs_aes_ops =
+		debugfs_create_u32("aes_ops",
+				   S_IRUSR | S_IRGRP | S_IROTH,
+				   dfs->dfs_root, (u32 *)&drv->stats.aes_ops);
+	dfs->dfs_sha256_ops =
+		debugfs_create_u32("sha256_ops",
+				   S_IRUSR | S_IRGRP | S_IROTH,
+				   dfs->dfs_root,
+				   (u32 *)&drv->stats.sha256_ops);
+	dfs->dfs_sha512_ops =
+		debugfs_create_u32("sha512_ops",
+				   S_IRUSR | S_IRGRP | S_IROTH,
+				   dfs->dfs_root,
+				   (u32 *)&drv->stats.sha512_ops);
+	dfs->dfs_aes_bytes =
+		debugfs_create_u64("aes_bytes",
+				   S_IRUSR | S_IRGRP | S_IROTH,
+				   dfs->dfs_root,
+				   (u64 *)&drv->stats.aes_bytes);
+	dfs->dfs_sha256_bytes =
+		debugfs_create_u64("sha256_bytes",
+				   S_IRUSR | S_IRGRP | S_IROTH,
+				   dfs->dfs_root,
+				   (u64 *)&drv->stats.sha256_bytes);
+	dfs->dfs_sha512_bytes =
+		debugfs_create_u64("sha512_bytes",
+				   S_IRUSR | S_IRGRP | S_IROTH,
+				   dfs->dfs_root,
+				   (u64 *)&drv->stats.sha512_bytes);
+	dfs->dfs_errors =
+		debugfs_create_u32("errors",
+				   S_IRUSR | S_IRGRP | S_IROTH,
+				   dfs->dfs_root, (u32 *)&drv->stats.errors);
+	dfs->dfs_last_error =
+		debugfs_create_u32("last_error",
+				   S_IRUSR | S_IRGRP | S_IROTH,
+				   dfs->dfs_root,
+				   (u32 *)&drv->stats.last_error);
+	dfs->dfs_last_error_pid =
+		debugfs_create_u32("last_error_pid",
+				   S_IRUSR | S_IRGRP | S_IROTH,
+				   dfs->dfs_root,
+				   (u32 *)&drv->stats.last_error_pid);
+	return 0;
+}
+
+void
+nx_debugfs_fini(struct nx_crypto_driver *drv)
+{
+	debugfs_remove_recursive(drv->dfs.dfs_root);
+}
+
+#endif
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 464fa2147dfb..f6b0a6e2ea50 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -16,7 +16,7 @@ menuconfig PM_DEVFREQ
 	  is attached to a single device and returns a "representative"
 	  clock frequency of the device, which is also attached
 	  to a device by 1-to-1. The device registering devfreq takes the
-	  responsiblity to "interpret" the representative frequency and
+	  responsibility to "interpret" the representative frequency and
 	  to set its every clock accordingly with the "target" callback
 	  given to devfreq.
 
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index e48ab3108ad8..5b739411d62f 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -107,13 +107,13 @@ extern int edac_debug_level;
  *
  * CPU caches (L1 and L2)
  * DMA engines
- * Core CPU swithces
+ * Core CPU switches
  * Fabric switch units
  * PCIe interface controllers
  * other EDAC/ECC type devices that can be monitored for
  * errors, etc.
  *
- * It allows for a 2 level set of hiearchry. For example:
+ * It allows for a 2 level set of hierarchy. For example:
  *
  * cache could be composed of L1, L2 and L3 levels of cache.
  * Each CPU core would have its own L1 cache, while sharing
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 4b154593343a..45b8f4bdd773 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -56,7 +56,7 @@ static void edac_device_dump_device(struct edac_device_ctl_info *edac_dev)
  *
  *	The control structure is allocated in complete chunk
  *	from the OS. It is in turn sub allocated to the
- *	various objects that compose the struture
+ *	various objects that compose the structure
  *
  *	The structure has a 'nr_instance' array within itself.
  *	Each instance represents a major component
@@ -118,7 +118,7 @@ struct edac_device_ctl_info *edac_device_alloc_ctl_info(
 		/* Calc the 'end' offset past the attributes array */
 		pvt = edac_align_ptr(&dev_attrib[count], sz_private);
 	} else {
-		/* no attribute array specificed */
+		/* no attribute array specified */
 		pvt = edac_align_ptr(dev_attrib, sz_private);
 	}
 
@@ -394,7 +394,7 @@ static void edac_device_workq_function(struct work_struct *work_req)
 
 	/* Reschedule the workq for the next time period to start again
 	 * if the number of msec is for 1 sec, then adjust to the next
-	 * whole one second to save timers fireing all over the period
+	 * whole one second to save timers firing all over the period
 	 * between integral seconds
 	 */
 	if (edac_dev->poll_msec == 1000)
@@ -563,7 +563,7 @@ EXPORT_SYMBOL_GPL(edac_device_add_device);
  *	Remove sysfs entries for specified edac_device structure and
  *	then remove edac_device structure from global list
  *
- * @pdev:
+ * @dev:
  *	Pointer to 'struct device' representing edac_device
  *	structure to remove.
  *
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index 85226ccf5290..7f1dfcc4e597 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -90,7 +90,7 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
 #define MC_MAX_DOD	0x64
 
 /*
- * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet:
+ * OFFSETS for Device 3 Function 4, as indicated on Xeon 5500 datasheet:
  * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
  */
 
@@ -101,7 +101,7 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
   #define DIMM1_COR_ERR(r)			(((r) >> 16) & 0x7fff)
   #define DIMM0_COR_ERR(r)			((r) & 0x7fff)
 
-/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+/* OFFSETS for Device 3 Function 2, as indicated on Xeon 5500 datasheet */
 #define MC_SSRCONTROL		0x48
   #define SSR_MODE_DISABLE	0x00
   #define SSR_MODE_ENABLE	0x01
@@ -398,7 +398,7 @@ static DEFINE_PCI_DEVICE_TABLE(i7core_pci_tbl) = {
 };
 
 /****************************************************************************
-			Anciliary status routines
+			Ancillary status routines
  ****************************************************************************/
 
 	/* MC_CONTROL bits */
@@ -1361,7 +1361,7 @@ static int i7core_get_onedevice(struct pci_dev **prev,
 			      dev_descr->dev_id, *prev);
 
 	/*
-	 * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+	 * On Xeon 55xx, the Intel QuickPath Arch Generic Non-core regs
 	 * is at addr 8086:2c40, instead of 8086:2c41. So, we need
 	 * to probe for the alternate address in case of failure
 	 */
@@ -2132,7 +2132,7 @@ static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
 
 /*
  * get_sdram_scrub_rate		This routine convert current scrub rate value
- *				into byte/sec bandwidth accourding to
+ *				into byte/sec bandwidth according to
  *				SCRUBINTERVAL formula found in datasheet.
  */
 static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index a203536d90dd..123204f8e23b 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -58,7 +58,7 @@ static int probed;
 
 /*
  * FIXME: For now, let's order by device function, as it makes
- * easier for driver's development proccess. This table should be
+ * easier for driver's development process. This table should be
  * moved to pci_id.h when submitted upstream
  */
 #define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0	0x3cf4	/* 12.6 */
@@ -375,7 +375,7 @@ static DEFINE_PCI_DEVICE_TABLE(sbridge_pci_tbl) = {
 
 
 /****************************************************************************
-			Anciliary status routines
+			Ancillary status routines
  ****************************************************************************/
 
 static inline int numrank(u32 mtr)
@@ -1430,7 +1430,7 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
 		type = "FATAL";
 
 	/*
-	 * According with Table 15-9 of the Intel Archictecture spec vol 3A,
+	 * According with Table 15-9 of the Intel Architecture spec vol 3A,
 	 * memory errors should fit in this mask:
 	 *	000f 0000 1mmm cccc (binary)
 	 * where:
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
new file mode 100644
index 000000000000..29c5cf852efc
--- /dev/null
+++ b/drivers/extcon/Kconfig
@@ -0,0 +1,32 @@
+menuconfig EXTCON
+	tristate "External Connector Class (extcon) support"
+	help
+	  Say Y here to enable external connector class (extcon) support.
+	  This allows monitoring external connectors by userspace
+	  via sysfs and uevent and supports external connectors with
+	  multiple states; i.e., an extcon that may have multiple
+	  cables attached. For example, an external connector of a device
+	  may be used to connect an HDMI cable and a AC adaptor, and to
+	  host USB ports. Many of 30-pin connectors including PDMI are
+	  also good examples.
+
+if EXTCON
+
+comment "Extcon Device Drivers"
+
+config EXTCON_GPIO
+	tristate "GPIO extcon support"
+	depends on GENERIC_GPIO
+	help
+	  Say Y here to enable GPIO based extcon support. Note that GPIO
+	  extcon supports single state per extcon instance.
+
+config EXTCON_MAX8997
+	tristate "MAX8997 EXTCON Support"
+	depends on MFD_MAX8997
+	help
+	  If you say yes here you get support for the MUIC device of
+	  Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
+	  detector and switch.
+
+endif # MULTISTATE_SWITCH
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
new file mode 100644
index 000000000000..86020bdb6da0
--- /dev/null
+++ b/drivers/extcon/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for external connector class (extcon) devices
+#
+
+obj-$(CONFIG_EXTCON)		+= extcon_class.o
+obj-$(CONFIG_EXTCON_GPIO)	+= extcon_gpio.o
+obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
diff --git a/drivers/misc/max8997-muic.c b/drivers/extcon/extcon-max8997.c
index 19591eaa492a..23416e443765 100644
--- a/drivers/misc/max8997-muic.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -1,7 +1,7 @@
 /*
- * max8997-muic.c - MAX8997 muic driver for the Maxim 8997
+ * extcon-max8997.c - MAX8997 extcon driver to support MAX8997 MUIC
  *
- *  Copyright (C) 2011 Samsung Electrnoics
+ *  Copyright (C) 2012 Samsung Electrnoics
  *  Donggeun Kim <dg77.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -13,11 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/kernel.h>
@@ -30,6 +25,9 @@
 #include <linux/kobject.h>
 #include <linux/mfd/max8997.h>
 #include <linux/mfd/max8997-private.h>
+#include <linux/extcon.h>
+
+#define	DEV_NAME			"max8997-muic"
 
 /* MAX8997-MUIC STATUS1 register */
 #define STATUS1_ADC_SHIFT		0
@@ -95,7 +93,6 @@ static struct max8997_muic_irq muic_irqs[] = {
 
 struct max8997_muic_info {
 	struct device *dev;
-	struct max8997_dev *iodev;
 	struct i2c_client *muic;
 	struct max8997_muic_platform_data *muic_pdata;
 
@@ -106,12 +103,28 @@ struct max8997_muic_info {
 	int pre_adc;
 
 	struct mutex mutex;
+
+	struct extcon_dev	*edev;
+};
+
+const char *max8997_extcon_cable[] = {
+	[0] = "USB",
+	[1] = "USB-Host",
+	[2] = "TA",
+	[3] = "Fast-charger",
+	[4] = "Slow-charger",
+	[5] = "Charge-downstream",
+	[6] = "MHL",
+	[7] = "Dock-desk",
+	[7] = "Dock-card",
+	[8] = "JIG",
+
+	NULL,
 };
 
 static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 			enum max8997_muic_usb_type usb_type, bool attached)
 {
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
 	int ret = 0;
 
 	if (usb_type == MAX8997_USB_HOST) {
@@ -125,25 +138,25 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 		}
 	}
 
-	if (mdata->usb_callback)
-		mdata->usb_callback(usb_type, attached);
+	switch (usb_type) {
+	case MAX8997_USB_HOST:
+		extcon_set_cable_state(info->edev, "USB-Host", attached);
+		break;
+	case MAX8997_USB_DEVICE:
+		extcon_set_cable_state(info->edev, "USB", attached);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
 out:
 	return ret;
 }
 
-static void max8997_muic_handle_mhl(struct max8997_muic_info *info,
-			bool attached)
-{
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
-
-	if (mdata->mhl_callback)
-		mdata->mhl_callback(attached);
-}
-
 static int max8997_muic_handle_dock(struct max8997_muic_info *info,
 			int adc, bool attached)
 {
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
 	int ret = 0;
 
 	/* switch to AUDIO */
@@ -157,14 +170,13 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info,
 
 	switch (adc) {
 	case MAX8997_ADC_DESKDOCK:
-		if (mdata->deskdock_callback)
-			mdata->deskdock_callback(attached);
+		extcon_set_cable_state(info->edev, "Dock-desk", attached);
 		break;
 	case MAX8997_ADC_CARDOCK:
-		if (mdata->cardock_callback)
-			mdata->cardock_callback(attached);
+		extcon_set_cable_state(info->edev, "Dock-card", attached);
 		break;
 	default:
+		ret = -EINVAL;
 		break;
 	}
 out:
@@ -174,7 +186,6 @@ out:
 static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 			bool attached)
 {
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
 	int ret = 0;
 
 	/* switch to UART */
@@ -186,8 +197,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 		goto out;
 	}
 
-	if (mdata->uart_callback)
-		mdata->uart_callback(attached);
+	extcon_set_cable_state(info->edev, "JIG", attached);
 out:
 	return ret;
 }
@@ -201,7 +211,7 @@ static int max8997_muic_handle_adc_detach(struct max8997_muic_info *info)
 		ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, false);
 		break;
 	case MAX8997_ADC_MHL:
-		max8997_muic_handle_mhl(info, false);
+		extcon_set_cable_state(info->edev, "MHL", false);
 		break;
 	case MAX8997_ADC_JIG_USB_1:
 	case MAX8997_ADC_JIG_USB_2:
@@ -230,7 +240,7 @@ static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc)
 		ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, true);
 		break;
 	case MAX8997_ADC_MHL:
-		max8997_muic_handle_mhl(info, true);
+		extcon_set_cable_state(info->edev, "MHL", true);
 		break;
 	case MAX8997_ADC_JIG_USB_1:
 	case MAX8997_ADC_JIG_USB_2:
@@ -247,10 +257,40 @@ static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc)
 		ret = max8997_muic_handle_adc_detach(info);
 		break;
 	default:
-		break;
+		ret = -EINVAL;
+		goto out;
 	}
 
 	info->pre_adc = adc;
+out:
+	return ret;
+}
+
+static int max8997_muic_handle_charger_type_detach(
+				struct max8997_muic_info *info)
+{
+	int ret = 0;
+
+	switch (info->pre_charger_type) {
+	case MAX8997_CHARGER_TYPE_USB:
+		extcon_set_cable_state(info->edev, "USB", false);
+		break;
+	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
+		extcon_set_cable_state(info->edev, "Charge-downstream", false);
+		break;
+	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
+		extcon_set_cable_state(info->edev, "TA", false);
+		break;
+	case MAX8997_CHARGER_TYPE_500MA:
+		extcon_set_cable_state(info->edev, "Slow-charger", false);
+		break;
+	case MAX8997_CHARGER_TYPE_1A:
+		extcon_set_cable_state(info->edev, "Fast-charger", false);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
 
 	return ret;
 }
@@ -258,7 +298,6 @@ static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc)
 static int max8997_muic_handle_charger_type(struct max8997_muic_info *info,
 				enum max8997_muic_charger_type charger_type)
 {
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
 	u8 adc;
 	int ret;
 
@@ -270,30 +309,29 @@ static int max8997_muic_handle_charger_type(struct max8997_muic_info *info,
 
 	switch (charger_type) {
 	case MAX8997_CHARGER_TYPE_NONE:
-		if (mdata->charger_callback)
-			mdata->charger_callback(false, charger_type);
-		if (info->pre_charger_type == MAX8997_CHARGER_TYPE_USB) {
-			max8997_muic_handle_usb(info,
-					MAX8997_USB_DEVICE, false);
-		}
+		ret = max8997_muic_handle_charger_type_detach(info);
 		break;
 	case MAX8997_CHARGER_TYPE_USB:
 		if ((adc & STATUS1_ADC_MASK) == MAX8997_ADC_OPEN) {
 			max8997_muic_handle_usb(info,
 					MAX8997_USB_DEVICE, true);
 		}
-		if (mdata->charger_callback)
-			mdata->charger_callback(true, charger_type);
 		break;
 	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
+		extcon_set_cable_state(info->edev, "Charge-downstream", true);
+		break;
 	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
+		extcon_set_cable_state(info->edev, "TA", true);
+		break;
 	case MAX8997_CHARGER_TYPE_500MA:
+		extcon_set_cable_state(info->edev, "Slow-charger", true);
+		break;
 	case MAX8997_CHARGER_TYPE_1A:
-		if (mdata->charger_callback)
-			mdata->charger_callback(true, charger_type);
+		extcon_set_cable_state(info->edev, "Fast-charger", true);
 		break;
 	default:
-		break;
+		ret = -EINVAL;
+		goto out;
 	}
 
 	info->pre_charger_type = charger_type;
@@ -305,18 +343,17 @@ static void max8997_muic_irq_work(struct work_struct *work)
 {
 	struct max8997_muic_info *info = container_of(work,
 			struct max8997_muic_info, irq_work);
-	struct max8997_platform_data *pdata =
-				dev_get_platdata(info->iodev->dev);
-	u8 status[3];
+	struct max8997_dev *max8997 = i2c_get_clientdata(info->muic);
+	u8 status[2];
 	u8 adc, chg_type;
 
-	int irq_type = info->irq - pdata->irq_base;
+	int irq_type = info->irq - max8997->irq_base;
 	int ret;
 
 	mutex_lock(&info->mutex);
 
 	ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1,
-				3, status);
+				2, status);
 	if (ret) {
 		dev_err(info->dev, "failed to read muic register\n");
 		mutex_unlock(&info->mutex);
@@ -340,8 +377,8 @@ static void max8997_muic_irq_work(struct work_struct *work)
 		max8997_muic_handle_charger_type(info, chg_type);
 		break;
 	default:
-		dev_info(info->dev, "misc interrupt: %s occurred\n",
-			 muic_irqs[irq_type].name);
+		dev_info(info->dev, "misc interrupt: irq %d occurred\n",
+				irq_type);
 		break;
 	}
 
@@ -387,21 +424,10 @@ static void max8997_muic_detect_dev(struct max8997_muic_info *info)
 	max8997_muic_handle_charger_type(info, chg_type);
 }
 
-static void max8997_initialize_device(struct max8997_muic_info *info)
-{
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
-	int i;
-
-	for (i = 0; i < mdata->num_init_data; i++) {
-		max8997_write_reg(info->muic, mdata->init_data[i].addr,
-				mdata->init_data[i].data);
-	}
-}
-
 static int __devinit max8997_muic_probe(struct platform_device *pdev)
 {
-	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent);
+	struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev);
 	struct max8997_muic_info *info;
 	int ret, i;
 
@@ -412,16 +438,8 @@ static int __devinit max8997_muic_probe(struct platform_device *pdev)
 		goto err_kfree;
 	}
 
-	if (!pdata->muic_pdata) {
-		dev_err(&pdev->dev, "failed to get platform_data\n");
-		ret = -EINVAL;
-		goto err_pdata;
-	}
-	info->muic_pdata = pdata->muic_pdata;
-
 	info->dev = &pdev->dev;
-	info->iodev = iodev;
-	info->muic = iodev->muic;
+	info->muic = max8997->muic;
 
 	platform_set_drvdata(pdev, info);
 	mutex_init(&info->mutex);
@@ -440,24 +458,45 @@ static int __devinit max8997_muic_probe(struct platform_device *pdev)
 				"failed: irq request (IRQ: %d,"
 				" error :%d)\n",
 				muic_irq->irq, ret);
-
-			for (i = i - 1; i >= 0; i--)
-				free_irq(muic_irq->irq, info);
-
 			goto err_irq;
 		}
 	}
 
+	/* External connector */
+	info->edev = kzalloc(sizeof(struct extcon_dev), GFP_KERNEL);
+	if (!info->edev) {
+		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
+		ret = -ENOMEM;
+		goto err_irq;
+	}
+	info->edev->name = DEV_NAME;
+	info->edev->supported_cable = max8997_extcon_cable;
+	ret = extcon_dev_register(info->edev, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register extcon device\n");
+		goto err_extcon;
+	}
+
 	/* Initialize registers according to platform data */
-	max8997_initialize_device(info);
+	if (pdata->muic_pdata) {
+		struct max8997_muic_platform_data *mdata = info->muic_pdata;
+
+		for (i = 0; i < mdata->num_init_data; i++) {
+			max8997_write_reg(info->muic, mdata->init_data[i].addr,
+					mdata->init_data[i].data);
+		}
+	}
 
 	/* Initial device detection */
 	max8997_muic_detect_dev(info);
 
 	return ret;
 
+err_extcon:
+	kfree(info->edev);
 err_irq:
-err_pdata:
+	while (--i >= 0)
+		free_irq(pdata->irq_base + muic_irqs[i].irq, info);
 	kfree(info);
 err_kfree:
 	return ret;
@@ -466,14 +505,15 @@ err_kfree:
 static int __devexit max8997_muic_remove(struct platform_device *pdev)
 {
 	struct max8997_muic_info *info = platform_get_drvdata(pdev);
-	struct max8997_platform_data *pdata =
-				dev_get_platdata(info->iodev->dev);
+	struct max8997_dev *max8997 = i2c_get_clientdata(info->muic);
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
-		free_irq(pdata->irq_base + muic_irqs[i].irq, info);
+		free_irq(max8997->irq_base + muic_irqs[i].irq, info);
 	cancel_work_sync(&info->irq_work);
 
+	extcon_dev_unregister(info->edev);
+
 	kfree(info);
 
 	return 0;
@@ -481,7 +521,7 @@ static int __devexit max8997_muic_remove(struct platform_device *pdev)
 
 static struct platform_driver max8997_muic_driver = {
 	.driver		= {
-		.name	= "max8997-muic",
+		.name	= DEV_NAME,
 		.owner	= THIS_MODULE,
 	},
 	.probe		= max8997_muic_probe,
@@ -490,6 +530,6 @@ static struct platform_driver max8997_muic_driver = {
 
 module_platform_driver(max8997_muic_driver);
 
-MODULE_DESCRIPTION("Maxim MAX8997 MUIC driver");
+MODULE_DESCRIPTION("Maxim MAX8997 Extcon driver");
 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/extcon/extcon_class.c b/drivers/extcon/extcon_class.c
new file mode 100644
index 000000000000..f598a700ec15
--- /dev/null
+++ b/drivers/extcon/extcon_class.c
@@ -0,0 +1,832 @@
+/*
+ *  drivers/extcon/extcon_class.c
+ *
+ *  External connector (extcon) class driver
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Author: Donggeun Kim <dg77.kim@samsung.com>
+ * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * based on android/drivers/switch/switch_class.c
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/slab.h>
+
+/*
+ * extcon_cable_name suggests the standard cable names for commonly used
+ * cable types.
+ *
+ * However, please do not use extcon_cable_name directly for extcon_dev
+ * struct's supported_cable pointer unless your device really supports
+ * every single port-type of the following cable names. Please choose cable
+ * names that are actually used in your extcon device.
+ */
+const char *extcon_cable_name[] = {
+	[EXTCON_USB]		= "USB",
+	[EXTCON_USB_HOST]	= "USB-Host",
+	[EXTCON_TA]		= "TA",
+	[EXTCON_FAST_CHARGER]	= "Fast-charger",
+	[EXTCON_SLOW_CHARGER]	= "Slow-charger",
+	[EXTCON_CHARGE_DOWNSTREAM]	= "Charge-downstream",
+	[EXTCON_HDMI]		= "HDMI",
+	[EXTCON_MHL]		= "MHL",
+	[EXTCON_DVI]		= "DVI",
+	[EXTCON_VGA]		= "VGA",
+	[EXTCON_DOCK]		= "Dock",
+	[EXTCON_LINE_IN]	= "Line-in",
+	[EXTCON_LINE_OUT]	= "Line-out",
+	[EXTCON_MIC_IN]		= "Microphone",
+	[EXTCON_HEADPHONE_OUT]	= "Headphone",
+	[EXTCON_SPDIF_IN]	= "SPDIF-in",
+	[EXTCON_SPDIF_OUT]	= "SPDIF-out",
+	[EXTCON_VIDEO_IN]	= "Video-in",
+	[EXTCON_VIDEO_OUT]	= "Video-out",
+	[EXTCON_MECHANICAL]	= "Mechanical",
+
+	NULL,
+};
+
+struct class *extcon_class;
+#if defined(CONFIG_ANDROID)
+static struct class_compat *switch_class;
+#endif /* CONFIG_ANDROID */
+
+static LIST_HEAD(extcon_dev_list);
+static DEFINE_MUTEX(extcon_dev_list_lock);
+
+/**
+ * check_mutually_exclusive - Check if new_state violates mutually_exclusive
+ *			    condition.
+ * @edev:	the extcon device
+ * @new_state:	new cable attach status for @edev
+ *
+ * Returns 0 if nothing violates. Returns the index + 1 for the first
+ * violated condition.
+ */
+static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state)
+{
+	int i = 0;
+
+	if (!edev->mutually_exclusive)
+		return 0;
+
+	for (i = 0; edev->mutually_exclusive[i]; i++) {
+		int count = 0, j;
+		u32 correspondants = new_state & edev->mutually_exclusive[i];
+		u32 exp = 1;
+
+		for (j = 0; j < 32; j++) {
+			if (exp & correspondants)
+				count++;
+			if (count > 1)
+				return i + 1;
+			exp <<= 1;
+		}
+	}
+
+	return 0;
+}
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int i, count = 0;
+	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+	if (edev->print_state) {
+		int ret = edev->print_state(edev, buf);
+
+		if (ret >= 0)
+			return ret;
+		/* Use default if failed */
+	}
+
+	if (edev->max_supported == 0)
+		return sprintf(buf, "%u\n", edev->state);
+
+	for (i = 0; i < SUPPORTED_CABLE_MAX; i++) {
+		if (!edev->supported_cable[i])
+			break;
+		count += sprintf(buf + count, "%s=%d\n",
+				 edev->supported_cable[i],
+				 !!(edev->state & (1 << i)));
+	}
+
+	return count;
+}
+
+int extcon_set_state(struct extcon_dev *edev, u32 state);
+static ssize_t state_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	u32 state;
+	ssize_t ret = 0;
+	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+	ret = sscanf(buf, "0x%x", &state);
+	if (ret == 0)
+		ret = -EINVAL;
+	else
+		ret = extcon_set_state(edev, state);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t name_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+	/* Optional callback given by the user */
+	if (edev->print_name) {
+		int ret = edev->print_name(edev, buf);
+		if (ret >= 0)
+			return ret;
+	}
+
+	return sprintf(buf, "%s\n", dev_name(edev->dev));
+}
+
+static ssize_t cable_name_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+						  attr_name);
+
+	return sprintf(buf, "%s\n",
+		       cable->edev->supported_cable[cable->cable_index]);
+}
+
+static ssize_t cable_state_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+						  attr_state);
+
+	return sprintf(buf, "%d\n",
+		       extcon_get_cable_state_(cable->edev,
+					       cable->cable_index));
+}
+
+static ssize_t cable_state_store(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t count)
+{
+	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+						  attr_state);
+	int ret, state;
+
+	ret = sscanf(buf, "%d", &state);
+	if (ret == 0)
+		ret = -EINVAL;
+	else
+		ret = extcon_set_cable_state_(cable->edev, cable->cable_index,
+					      state);
+
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/**
+ * extcon_update_state() - Update the cable attach states of the extcon device
+ *			only for the masked bits.
+ * @edev:	the extcon device
+ * @mask:	the bit mask to designate updated bits.
+ * @state:	new cable attach status for @edev
+ *
+ * Changing the state sends uevent with environment variable containing
+ * the name of extcon device (envp[0]) and the state output (envp[1]).
+ * Tizen uses this format for extcon device to get events from ports.
+ * Android uses this format as well.
+ *
+ * Note that the notifier provides which bits are changed in the state
+ * variable with the val parameter (second) to the callback.
+ */
+int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
+{
+	char name_buf[120];
+	char state_buf[120];
+	char *prop_buf;
+	char *envp[3];
+	int env_offset = 0;
+	int length;
+	unsigned long flags;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	if (edev->state != ((edev->state & ~mask) | (state & mask))) {
+		u32 old_state = edev->state;
+
+		if (check_mutually_exclusive(edev, (edev->state & ~mask) |
+						   (state & mask))) {
+			spin_unlock_irqrestore(&edev->lock, flags);
+			return -EPERM;
+		}
+
+		edev->state &= ~mask;
+		edev->state |= state & mask;
+
+		raw_notifier_call_chain(&edev->nh, old_state, edev);
+
+		/* This could be in interrupt handler */
+		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
+		if (prop_buf) {
+			length = name_show(edev->dev, NULL, prop_buf);
+			if (length > 0) {
+				if (prop_buf[length - 1] == '\n')
+					prop_buf[length - 1] = 0;
+				snprintf(name_buf, sizeof(name_buf),
+					"NAME=%s", prop_buf);
+				envp[env_offset++] = name_buf;
+			}
+			length = state_show(edev->dev, NULL, prop_buf);
+			if (length > 0) {
+				if (prop_buf[length - 1] == '\n')
+					prop_buf[length - 1] = 0;
+				snprintf(state_buf, sizeof(state_buf),
+					"STATE=%s", prop_buf);
+				envp[env_offset++] = state_buf;
+			}
+			envp[env_offset] = NULL;
+			/* Unlock early before uevent */
+			spin_unlock_irqrestore(&edev->lock, flags);
+
+			kobject_uevent_env(&edev->dev->kobj, KOBJ_CHANGE, envp);
+			free_page((unsigned long)prop_buf);
+		} else {
+			/* Unlock early before uevent */
+			spin_unlock_irqrestore(&edev->lock, flags);
+
+			dev_err(edev->dev, "out of memory in extcon_set_state\n");
+			kobject_uevent(&edev->dev->kobj, KOBJ_CHANGE);
+		}
+	} else {
+		/* No changes */
+		spin_unlock_irqrestore(&edev->lock, flags);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(extcon_update_state);
+
+/**
+ * extcon_set_state() - Set the cable attach states of the extcon device.
+ * @edev:	the extcon device
+ * @state:	new cable attach status for @edev
+ *
+ * Note that notifier provides which bits are changed in the state
+ * variable with the val parameter (second) to the callback.
+ */
+int extcon_set_state(struct extcon_dev *edev, u32 state)
+{
+	return extcon_update_state(edev, 0xffffffff, state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_state);
+
+/**
+ * extcon_find_cable_index() - Get the cable index based on the cable name.
+ * @edev:	the extcon device that has the cable.
+ * @cable_name:	cable name to be searched.
+ *
+ * Note that accessing a cable state based on cable_index is faster than
+ * cable_name because using cable_name induces a loop with strncmp().
+ * Thus, when get/set_cable_state is repeatedly used, using cable_index
+ * is recommended.
+ */
+int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name)
+{
+	int i;
+
+	if (edev->supported_cable) {
+		for (i = 0; edev->supported_cable[i]; i++) {
+			if (!strncmp(edev->supported_cable[i],
+				cable_name, CABLE_NAME_MAX))
+				return i;
+		}
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(extcon_find_cable_index);
+
+/**
+ * extcon_get_cable_state_() - Get the status of a specific cable.
+ * @edev:	the extcon device that has the cable.
+ * @index:	cable index that can be retrieved by extcon_find_cable_index().
+ */
+int extcon_get_cable_state_(struct extcon_dev *edev, int index)
+{
+	if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+		return -EINVAL;
+
+	return !!(edev->state & (1 << index));
+}
+EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
+
+/**
+ * extcon_get_cable_state() - Get the status of a specific cable.
+ * @edev:	the extcon device that has the cable.
+ * @cable_name:	cable name.
+ *
+ * Note that this is slower than extcon_get_cable_state_.
+ */
+int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name)
+{
+	return extcon_get_cable_state_(edev, extcon_find_cable_index
+						(edev, cable_name));
+}
+EXPORT_SYMBOL_GPL(extcon_get_cable_state);
+
+/**
+ * extcon_get_cable_state_() - Set the status of a specific cable.
+ * @edev:	the extcon device that has the cable.
+ * @index:	cable index that can be retrieved by extcon_find_cable_index().
+ * @cable_state:	the new cable status. The default semantics is
+ *			true: attached / false: detached.
+ */
+int extcon_set_cable_state_(struct extcon_dev *edev,
+			int index, bool cable_state)
+{
+	u32 state;
+
+	if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+		return -EINVAL;
+
+	state = cable_state ? (1 << index) : 0;
+	return extcon_update_state(edev, 1 << index, state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
+
+/**
+ * extcon_get_cable_state() - Set the status of a specific cable.
+ * @edev:	the extcon device that has the cable.
+ * @cable_name:	cable name.
+ * @cable_state:	the new cable status. The default semantics is
+ *			true: attached / false: detached.
+ *
+ * Note that this is slower than extcon_set_cable_state_.
+ */
+int extcon_set_cable_state(struct extcon_dev *edev,
+			const char *cable_name, bool cable_state)
+{
+	return extcon_set_cable_state_(edev, extcon_find_cable_index
+					(edev, cable_name), cable_state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_cable_state);
+
+/**
+ * extcon_get_extcon_dev() - Get the extcon device instance from the name
+ * @extcon_name:	The extcon name provided with extcon_dev_register()
+ */
+struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
+{
+	struct extcon_dev *sd;
+
+	mutex_lock(&extcon_dev_list_lock);
+	list_for_each_entry(sd, &extcon_dev_list, entry) {
+		if (!strcmp(sd->name, extcon_name))
+			goto out;
+	}
+	sd = NULL;
+out:
+	mutex_unlock(&extcon_dev_list_lock);
+	return sd;
+}
+EXPORT_SYMBOL_GPL(extcon_get_extcon_dev);
+
+static int _call_per_cable(struct notifier_block *nb, unsigned long val,
+			   void *ptr)
+{
+	struct extcon_specific_cable_nb *obj = container_of(nb,
+			struct extcon_specific_cable_nb, internal_nb);
+	struct extcon_dev *edev = ptr;
+
+	if ((val & (1 << obj->cable_index)) !=
+	    (edev->state & (1 << obj->cable_index))) {
+		bool cable_state = true;
+
+		obj->previous_value = val;
+
+		if (val & (1 << obj->cable_index))
+			cable_state = false;
+
+		return obj->user_nb->notifier_call(obj->user_nb,
+				cable_state, ptr);
+	}
+
+	return NOTIFY_OK;
+}
+
+/**
+ * extcon_register_interest() - Register a notifier for a state change of a
+ *			      specific cable, not a entier set of cables of a
+ *			      extcon device.
+ * @obj:	an empty extcon_specific_cable_nb object to be returned.
+ * @extcon_name:	the name of extcon device.
+ * @cable_name:		the target cable name.
+ * @nb:		the notifier block to get notified.
+ *
+ * Provide an empty extcon_specific_cable_nb. extcon_register_interest() sets
+ * the struct for you.
+ *
+ * extcon_register_interest is a helper function for those who want to get
+ * notification for a single specific cable's status change. If a user wants
+ * to get notification for any changes of all cables of a extcon device,
+ * he/she should use the general extcon_register_notifier().
+ *
+ * Note that the second parameter given to the callback of nb (val) is
+ * "old_state", not the current state. The current state can be retrieved
+ * by looking at the third pameter (edev pointer)'s state value.
+ */
+int extcon_register_interest(struct extcon_specific_cable_nb *obj,
+			     const char *extcon_name, const char *cable_name,
+			     struct notifier_block *nb)
+{
+	if (!obj || !extcon_name || !cable_name || !nb)
+		return -EINVAL;
+
+	obj->edev = extcon_get_extcon_dev(extcon_name);
+	if (!obj->edev)
+		return -ENODEV;
+
+	obj->cable_index = extcon_find_cable_index(obj->edev, cable_name);
+	if (obj->cable_index < 0)
+		return -ENODEV;
+
+	obj->user_nb = nb;
+
+	obj->internal_nb.notifier_call = _call_per_cable;
+
+	return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb);
+}
+
+/**
+ * extcon_unregister_interest() - Unregister the notifier registered by
+ *				extcon_register_interest().
+ * @obj:	the extcon_specific_cable_nb object returned by
+ *		extcon_register_interest().
+ */
+int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
+{
+	if (!obj)
+		return -EINVAL;
+
+	return raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
+}
+
+/**
+ * extcon_register_notifier() - Register a notifee to get notified by
+ *			      any attach status changes from the extcon.
+ * @edev:	the extcon device.
+ * @nb:		a notifier block to be registered.
+ *
+ * Note that the second parameter given to the callback of nb (val) is
+ * "old_state", not the current state. The current state can be retrieved
+ * by looking at the third pameter (edev pointer)'s state value.
+ */
+int extcon_register_notifier(struct extcon_dev *edev,
+			struct notifier_block *nb)
+{
+	return raw_notifier_chain_register(&edev->nh, nb);
+}
+EXPORT_SYMBOL_GPL(extcon_register_notifier);
+
+/**
+ * extcon_unregister_notifier() - Unregister a notifee from the extcon device.
+ * @edev:	the extcon device.
+ * @nb:		a registered notifier block to be unregistered.
+ */
+int extcon_unregister_notifier(struct extcon_dev *edev,
+			struct notifier_block *nb)
+{
+	return raw_notifier_chain_unregister(&edev->nh, nb);
+}
+EXPORT_SYMBOL_GPL(extcon_unregister_notifier);
+
+static struct device_attribute extcon_attrs[] = {
+	__ATTR(state, S_IRUGO | S_IWUSR, state_show, state_store),
+	__ATTR_RO(name),
+	__ATTR_NULL,
+};
+
+static int create_extcon_class(void)
+{
+	if (!extcon_class) {
+		extcon_class = class_create(THIS_MODULE, "extcon");
+		if (IS_ERR(extcon_class))
+			return PTR_ERR(extcon_class);
+		extcon_class->dev_attrs = extcon_attrs;
+
+#if defined(CONFIG_ANDROID)
+		switch_class = class_compat_register("switch");
+		if (WARN(!switch_class, "cannot allocate"))
+			return -ENOMEM;
+#endif /* CONFIG_ANDROID */
+	}
+
+	return 0;
+}
+
+static void extcon_cleanup(struct extcon_dev *edev, bool skip)
+{
+	mutex_lock(&extcon_dev_list_lock);
+	list_del(&edev->entry);
+	mutex_unlock(&extcon_dev_list_lock);
+
+	if (!skip && get_device(edev->dev)) {
+		int index;
+
+		if (edev->mutually_exclusive && edev->max_supported) {
+			for (index = 0; edev->mutually_exclusive[index];
+			     index++)
+				kfree(edev->d_attrs_muex[index].attr.name);
+			kfree(edev->d_attrs_muex);
+			kfree(edev->attrs_muex);
+		}
+
+		for (index = 0; index < edev->max_supported; index++)
+			kfree(edev->cables[index].attr_g.name);
+
+		if (edev->max_supported) {
+			kfree(edev->extcon_dev_type.groups);
+			kfree(edev->cables);
+		}
+
+		device_unregister(edev->dev);
+		put_device(edev->dev);
+	}
+
+	kfree(edev->dev);
+}
+
+static void extcon_dev_release(struct device *dev)
+{
+	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+	extcon_cleanup(edev, true);
+}
+
+static const char *muex_name = "mutually_exclusive";
+static void dummy_sysfs_dev_release(struct device *dev)
+{
+}
+
+/**
+ * extcon_dev_register() - Register a new extcon device
+ * @edev	: the new extcon device (should be allocated before calling)
+ * @dev		: the parent device for this extcon device.
+ *
+ * Among the members of edev struct, please set the "user initializing data"
+ * in any case and set the "optional callbacks" if required. However, please
+ * do not set the values of "internal data", which are initialized by
+ * this function.
+ */
+int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
+{
+	int ret, index = 0;
+
+	if (!extcon_class) {
+		ret = create_extcon_class();
+		if (ret < 0)
+			return ret;
+	}
+
+	if (edev->supported_cable) {
+		/* Get size of array */
+		for (index = 0; edev->supported_cable[index]; index++)
+			;
+		edev->max_supported = index;
+	} else {
+		edev->max_supported = 0;
+	}
+
+	if (index > SUPPORTED_CABLE_MAX) {
+		dev_err(edev->dev, "extcon: maximum number of supported cables exceeded.\n");
+		return -EINVAL;
+	}
+
+	edev->dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!edev->dev)
+		return -ENOMEM;
+	edev->dev->parent = dev;
+	edev->dev->class = extcon_class;
+	edev->dev->release = extcon_dev_release;
+
+	dev_set_name(edev->dev, edev->name ? edev->name : dev_name(dev));
+
+	if (edev->max_supported) {
+		char buf[10];
+		char *str;
+		struct extcon_cable *cable;
+
+		edev->cables = kzalloc(sizeof(struct extcon_cable) *
+				       edev->max_supported, GFP_KERNEL);
+		if (!edev->cables) {
+			ret = -ENOMEM;
+			goto err_sysfs_alloc;
+		}
+		for (index = 0; index < edev->max_supported; index++) {
+			cable = &edev->cables[index];
+
+			snprintf(buf, 10, "cable.%d", index);
+			str = kzalloc(sizeof(char) * (strlen(buf) + 1),
+				      GFP_KERNEL);
+			if (!str) {
+				for (index--; index >= 0; index--) {
+					cable = &edev->cables[index];
+					kfree(cable->attr_g.name);
+				}
+				ret = -ENOMEM;
+
+				goto err_alloc_cables;
+			}
+			strcpy(str, buf);
+
+			cable->edev = edev;
+			cable->cable_index = index;
+			cable->attrs[0] = &cable->attr_name.attr;
+			cable->attrs[1] = &cable->attr_state.attr;
+			cable->attrs[2] = NULL;
+			cable->attr_g.name = str;
+			cable->attr_g.attrs = cable->attrs;
+
+			cable->attr_name.attr.name = "name";
+			cable->attr_name.attr.mode = 0444;
+			cable->attr_name.show = cable_name_show;
+
+			cable->attr_state.attr.name = "state";
+			cable->attr_state.attr.mode = 0644;
+			cable->attr_state.show = cable_state_show;
+			cable->attr_state.store = cable_state_store;
+		}
+	}
+
+	if (edev->max_supported && edev->mutually_exclusive) {
+		char buf[80];
+		char *name;
+
+		/* Count the size of mutually_exclusive array */
+		for (index = 0; edev->mutually_exclusive[index]; index++)
+			;
+
+		edev->attrs_muex = kzalloc(sizeof(struct attribute *) *
+					   (index + 1), GFP_KERNEL);
+		if (!edev->attrs_muex) {
+			ret = -ENOMEM;
+			goto err_muex;
+		}
+
+		edev->d_attrs_muex = kzalloc(sizeof(struct device_attribute) *
+					     index, GFP_KERNEL);
+		if (!edev->d_attrs_muex) {
+			ret = -ENOMEM;
+			kfree(edev->attrs_muex);
+			goto err_muex;
+		}
+
+		for (index = 0; edev->mutually_exclusive[index]; index++) {
+			sprintf(buf, "0x%x", edev->mutually_exclusive[index]);
+			name = kzalloc(sizeof(char) * (strlen(buf) + 1),
+				       GFP_KERNEL);
+			if (!name) {
+				for (index--; index >= 0; index--) {
+					kfree(edev->d_attrs_muex[index].attr.
+					      name);
+				}
+				kfree(edev->d_attrs_muex);
+				kfree(edev->attrs_muex);
+				ret = -ENOMEM;
+				goto err_muex;
+			}
+			strcpy(name, buf);
+			edev->d_attrs_muex[index].attr.name = name;
+			edev->d_attrs_muex[index].attr.mode = 0000;
+			edev->attrs_muex[index] = &edev->d_attrs_muex[index]
+							.attr;
+		}
+		edev->attr_g_muex.name = muex_name;
+		edev->attr_g_muex.attrs = edev->attrs_muex;
+
+	}
+
+	if (edev->max_supported) {
+		edev->extcon_dev_type.groups =
+			kzalloc(sizeof(struct attribute_group *) *
+				(edev->max_supported + 2), GFP_KERNEL);
+		if (!edev->extcon_dev_type.groups) {
+			ret = -ENOMEM;
+			goto err_alloc_groups;
+		}
+
+		edev->extcon_dev_type.name = dev_name(edev->dev);
+		edev->extcon_dev_type.release = dummy_sysfs_dev_release;
+
+		for (index = 0; index < edev->max_supported; index++)
+			edev->extcon_dev_type.groups[index] =
+				&edev->cables[index].attr_g;
+		if (edev->mutually_exclusive)
+			edev->extcon_dev_type.groups[index] =
+				&edev->attr_g_muex;
+
+		edev->dev->type = &edev->extcon_dev_type;
+	}
+
+	ret = device_register(edev->dev);
+	if (ret) {
+		put_device(edev->dev);
+		goto err_dev;
+	}
+#if defined(CONFIG_ANDROID)
+	if (switch_class)
+		ret = class_compat_create_link(switch_class, edev->dev,
+					       dev);
+#endif /* CONFIG_ANDROID */
+
+	spin_lock_init(&edev->lock);
+
+	RAW_INIT_NOTIFIER_HEAD(&edev->nh);
+
+	dev_set_drvdata(edev->dev, edev);
+	edev->state = 0;
+
+	mutex_lock(&extcon_dev_list_lock);
+	list_add(&edev->entry, &extcon_dev_list);
+	mutex_unlock(&extcon_dev_list_lock);
+
+	return 0;
+
+err_dev:
+	if (edev->max_supported)
+		kfree(edev->extcon_dev_type.groups);
+err_alloc_groups:
+	if (edev->max_supported && edev->mutually_exclusive) {
+		for (index = 0; edev->mutually_exclusive[index]; index++)
+			kfree(edev->d_attrs_muex[index].attr.name);
+		kfree(edev->d_attrs_muex);
+		kfree(edev->attrs_muex);
+	}
+err_muex:
+	for (index = 0; index < edev->max_supported; index++)
+		kfree(edev->cables[index].attr_g.name);
+err_alloc_cables:
+	if (edev->max_supported)
+		kfree(edev->cables);
+err_sysfs_alloc:
+	kfree(edev->dev);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_dev_register);
+
+/**
+ * extcon_dev_unregister() - Unregister the extcon device.
+ * @edev:	the extcon device instance to be unregitered.
+ *
+ * Note that this does not call kfree(edev) because edev was not allocated
+ * by this class.
+ */
+void extcon_dev_unregister(struct extcon_dev *edev)
+{
+	extcon_cleanup(edev, false);
+}
+EXPORT_SYMBOL_GPL(extcon_dev_unregister);
+
+static int __init extcon_class_init(void)
+{
+	return create_extcon_class();
+}
+module_init(extcon_class_init);
+
+static void __exit extcon_class_exit(void)
+{
+	class_destroy(extcon_class);
+}
+module_exit(extcon_class_exit);
+
+MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("External connector (extcon) class driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/extcon/extcon_gpio.c b/drivers/extcon/extcon_gpio.c
new file mode 100644
index 000000000000..fe7a07b47336
--- /dev/null
+++ b/drivers/extcon/extcon_gpio.c
@@ -0,0 +1,169 @@
+/*
+ *  drivers/extcon/extcon_gpio.c
+ *
+ *  Single-state GPIO extcon driver based on extcon class
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * Modified by MyungJoo Ham <myungjoo.ham@samsung.com> to support extcon
+ * (originally switch class is supported)
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/extcon.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/extcon.h>
+#include <linux/extcon/extcon_gpio.h>
+
+struct gpio_extcon_data {
+	struct extcon_dev edev;
+	unsigned gpio;
+	const char *state_on;
+	const char *state_off;
+	int irq;
+	struct delayed_work work;
+	unsigned long debounce_jiffies;
+};
+
+static void gpio_extcon_work(struct work_struct *work)
+{
+	int state;
+	struct gpio_extcon_data	*data =
+		container_of(to_delayed_work(work), struct gpio_extcon_data,
+			     work);
+
+	state = gpio_get_value(data->gpio);
+	extcon_set_state(&data->edev, state);
+}
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+	struct gpio_extcon_data *extcon_data = dev_id;
+
+	schedule_delayed_work(&extcon_data->work,
+			      extcon_data->debounce_jiffies);
+	return IRQ_HANDLED;
+}
+
+static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf)
+{
+	struct gpio_extcon_data	*extcon_data =
+		container_of(edev, struct gpio_extcon_data, edev);
+	const char *state;
+	if (extcon_get_state(edev))
+		state = extcon_data->state_on;
+	else
+		state = extcon_data->state_off;
+
+	if (state)
+		return sprintf(buf, "%s\n", state);
+	return -EINVAL;
+}
+
+static int __devinit gpio_extcon_probe(struct platform_device *pdev)
+{
+	struct gpio_extcon_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_extcon_data *extcon_data;
+	int ret = 0;
+
+	if (!pdata)
+		return -EBUSY;
+	if (!pdata->irq_flags) {
+		dev_err(&pdev->dev, "IRQ flag is not specified.\n");
+		return -EINVAL;
+	}
+
+	extcon_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
+				   GFP_KERNEL);
+	if (!extcon_data)
+		return -ENOMEM;
+
+	extcon_data->edev.name = pdata->name;
+	extcon_data->gpio = pdata->gpio;
+	extcon_data->state_on = pdata->state_on;
+	extcon_data->state_off = pdata->state_off;
+	if (pdata->state_on && pdata->state_off)
+		extcon_data->edev.print_state = extcon_gpio_print_state;
+	extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce);
+
+	ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
+	if (ret < 0)
+		goto err_extcon_dev_register;
+
+	ret = gpio_request_one(extcon_data->gpio, GPIOF_DIR_IN, pdev->name);
+	if (ret < 0)
+		goto err_request_gpio;
+
+	INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
+
+	extcon_data->irq = gpio_to_irq(extcon_data->gpio);
+	if (extcon_data->irq < 0) {
+		ret = extcon_data->irq;
+		goto err_detect_irq_num_failed;
+	}
+
+	ret = request_any_context_irq(extcon_data->irq, gpio_irq_handler,
+				      pdata->irq_flags, pdev->name,
+				      extcon_data);
+	if (ret < 0)
+		goto err_request_irq;
+
+	/* Perform initial detection */
+	gpio_extcon_work(&extcon_data->work.work);
+
+	return 0;
+
+err_request_irq:
+err_detect_irq_num_failed:
+	gpio_free(extcon_data->gpio);
+err_request_gpio:
+	extcon_dev_unregister(&extcon_data->edev);
+err_extcon_dev_register:
+	devm_kfree(&pdev->dev, extcon_data);
+
+	return ret;
+}
+
+static int __devexit gpio_extcon_remove(struct platform_device *pdev)
+{
+	struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&extcon_data->work);
+	gpio_free(extcon_data->gpio);
+	extcon_dev_unregister(&extcon_data->edev);
+	devm_kfree(&pdev->dev, extcon_data);
+
+	return 0;
+}
+
+static struct platform_driver gpio_extcon_driver = {
+	.probe		= gpio_extcon_probe,
+	.remove		= __devexit_p(gpio_extcon_remove),
+	.driver		= {
+		.name	= "extcon-gpio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(gpio_extcon_driver);
+
+MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
+MODULE_DESCRIPTION("GPIO extcon driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
index 3dd29399cef5..8950f6261bbb 100644
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@@ -83,8 +83,7 @@ EXPORT_SYMBOL(devm_gpio_request);
 void devm_gpio_free(struct device *dev, unsigned int gpio)
 {
 
-	WARN_ON(devres_destroy(dev, devm_gpio_release, devm_gpio_match,
+	WARN_ON(devres_release(dev, devm_gpio_release, devm_gpio_match,
 		&gpio));
-	gpio_free(gpio);
 }
 EXPORT_SYMBOL(devm_gpio_free);
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 0ebb7d4796fa..ef67e181377b 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -1827,14 +1827,10 @@ void radeon_do_release(struct drm_device * dev)
 			r600_do_cleanup_cp(dev);
 		else
 			radeon_do_cleanup_cp(dev);
-		if (dev_priv->me_fw) {
-			release_firmware(dev_priv->me_fw);
-			dev_priv->me_fw = NULL;
-		}
-		if (dev_priv->pfp_fw) {
-			release_firmware(dev_priv->pfp_fw);
-			dev_priv->pfp_fw = NULL;
-		}
+		release_firmware(dev_priv->me_fw);
+		dev_priv->me_fw = NULL;
+		release_firmware(dev_priv->pfp_fw);
+		dev_priv->pfp_fw = NULL;
 	}
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index c58a036233fb..456a77cf4b7f 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -551,7 +551,7 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev,
 
 	/* nothing to do if vm isn't bound */
 	if (vm->id == -1)
-		return 0;;
+		return 0;
 
 	bo_va = radeon_bo_va(bo, vm);
 	if (bo_va == NULL) {
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index c7008b5210f7..0519b05968b5 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -91,7 +91,7 @@ int radeon_gem_set_domain(struct drm_gem_object *gobj,
 	}
 	if (!domain) {
 		/* Do nothings */
-		printk(KERN_WARNING "Set domain withou domain !\n");
+		printk(KERN_WARNING "Set domain without domain !\n");
 		return 0;
 	}
 	if (domain == RADEON_GEM_DOMAIN_CPU) {
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index ffddcba32af6..034c80a10f1f 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -32,9 +32,13 @@ config HID
 	  If unsure, say Y.
 
 config HID_BATTERY_STRENGTH
-	bool
+	bool "Battery level reporting for HID devices"
 	depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
 	default n
+	---help---
+	This option adds support of reporting battery strength (for HID devices
+	that support this feature) through power_supply class so that userspace
+	tools, such as upower, can display it.
 
 config HIDRAW
 	bool "/dev/hidraw raw HID device support"
@@ -60,6 +64,18 @@ source "drivers/hid/usbhid/Kconfig"
 menu "Special HID drivers"
 	depends on HID
 
+config HID_GENERIC
+	tristate "Generic HID driver"
+	depends on HID
+	default y
+	---help---
+	Support for generic HID devices.
+
+	To compile this driver as a module, choose M here: the module
+	will be called hid-generic.
+
+	If unsure, say Y.
+
 config HID_A4TECH
 	tristate "A4 tech mice" if EXPERT
 	depends on USB_HID
@@ -92,6 +108,12 @@ config HID_APPLE
 	Say Y here if you want support for keyboards of	Apple iBooks, PowerBooks,
 	MacBooks, MacBook Pros and Apple Aluminum.
 
+config HID_AUREAL
+	tristate "Aureal"
+	depends on USB_HID
+	---help---
+	Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
+
 config HID_BELKIN
 	tristate "Belkin Flip KVM and Wireless keyboard" if EXPERT
 	depends on USB_HID
@@ -448,7 +470,7 @@ config HID_PICOLCD_FB
 	select FB_SYS_FOPS
 	---help---
 	  Provide access to PicoLCD's 256x64 monochrome display via a
-	  frambuffer device.
+	  framebuffer device.
 
 config HID_PICOLCD_BACKLIGHT
 	bool "Backlight control" if EXPERT
@@ -595,16 +617,10 @@ config THRUSTMASTER_FF
 config HID_WACOM
 	tristate "Wacom Bluetooth devices support"
 	depends on BT_HIDP
-	---help---
-	Support for Wacom Graphire Bluetooth tablet.
-
-config HID_WACOM_POWER_SUPPLY
-	bool "Wacom Bluetooth devices power supply status support"
-	depends on HID_WACOM
+	depends on LEDS_CLASS
 	select POWER_SUPPLY
 	---help---
-	  Say Y here if you want to enable power supply status monitoring for
-	  Wacom Bluetooth devices.
+	Support for Wacom Graphire Bluetooth and Intuos4 WL tablets.
 
 config HID_WIIMOTE
 	tristate "Nintendo Wii Remote support"
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 22f1d16cd79c..ca6cc9f0485c 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -9,6 +9,8 @@ endif
 
 obj-$(CONFIG_HID)		+= hid.o
 
+obj-$(CONFIG_HID_GENERIC)	+= hid-generic.o
+
 hid-$(CONFIG_HIDRAW)		+= hidraw.o
 
 hid-logitech-y		:= hid-lg.o
@@ -36,6 +38,7 @@ endif
 obj-$(CONFIG_HID_A4TECH)	+= hid-a4tech.o
 obj-$(CONFIG_HID_ACRUX)		+= hid-axff.o
 obj-$(CONFIG_HID_APPLE)		+= hid-apple.o
+obj-$(CONFIG_HID_AUREAL)        += hid-aureal.o
 obj-$(CONFIG_HID_BELKIN)	+= hid-belkin.o
 obj-$(CONFIG_HID_CHERRY)	+= hid-cherry.o
 obj-$(CONFIG_HID_CHICONY)	+= hid-chicony.o
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 299d23871122..fa10f847f7db 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -234,7 +234,7 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 		}
 	}
 
-        if (iso_layout) {
+	if (iso_layout) {
 		if (asc->quirks & APPLE_ISO_KEYBOARD) {
 			trans = apple_find_translation(apple_iso_keyboard, usage->code);
 			if (trans) {
@@ -458,6 +458,9 @@ static const struct hid_device_id apple_devices[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
 			APPLE_ISO_KEYBOARD },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
+				USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI),
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
diff --git a/drivers/hid/hid-aureal.c b/drivers/hid/hid-aureal.c
new file mode 100644
index 000000000000..ba64b041b8bf
--- /dev/null
+++ b/drivers/hid/hid-aureal.c
@@ -0,0 +1,54 @@
+/*
+ *  HID driver for Aureal Cy se W-01RN USB_V3.1 devices
+ *
+ *  Copyright (c) 2010 Franco Catrin <fcatrin@gmail.com>
+ *  Copyright (c) 2010 Ben Cropley <bcropley@internode.on.net>
+ *
+ *  Based on HID sunplus driver by
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ *  Copyright (c) 2007 Paul Walmsley
+ *  Copyright (c) 2008 Jiri Slaby
+ */
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+static __u8 *aureal_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	if (*rsize >= 54 && rdesc[52] == 0x25 && rdesc[53] == 0x01) {
+		dev_info(&hdev->dev, "fixing Aureal Cy se W-01RN USB_V3.1 report descriptor.\n");
+		rdesc[53] = 0x65;
+	} return rdesc;
+}
+
+static const struct hid_device_id aureal_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_AUREAL, USB_DEVICE_ID_AUREAL_W01RN) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, aureal_devices);
+
+static struct hid_driver aureal_driver = {
+	.name = "aureal",
+	.id_table = aureal_devices,
+	.report_fixup = aureal_report_fixup,
+};
+
+static int __init aureal_init(void)
+{
+	return hid_register_driver(&aureal_driver);
+}
+
+static void __exit aureal_exit(void)
+{
+	hid_unregister_driver(&aureal_driver);
+}
+
+module_init(aureal_init);
+module_exit(aureal_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 4da66b4b977c..8e3a6b261477 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -230,9 +230,16 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 		return -1;
 	}
 
-	if (parser->global.logical_maximum < parser->global.logical_minimum) {
-		hid_err(parser->device, "logical range invalid %d %d\n",
-				parser->global.logical_minimum, parser->global.logical_maximum);
+	/* Handle both signed and unsigned cases properly */
+	if ((parser->global.logical_minimum < 0 &&
+		parser->global.logical_maximum <
+		parser->global.logical_minimum) ||
+		(parser->global.logical_minimum >= 0 &&
+		(__u32)parser->global.logical_maximum <
+		(__u32)parser->global.logical_minimum)) {
+		dbg_hid("logical range invalid 0x%x 0x%x\n",
+			parser->global.logical_minimum,
+			parser->global.logical_maximum);
 		return -1;
 	}
 
@@ -546,12 +553,11 @@ static void hid_free_report(struct hid_report *report)
 }
 
 /*
- * Free a device structure, all reports, and all fields.
+ * Close report. This function returns the device
+ * state to the point prior to hid_open_report().
  */
-
-static void hid_device_release(struct device *dev)
+static void hid_close_report(struct hid_device *device)
 {
-	struct hid_device *device = container_of(dev, struct hid_device, dev);
 	unsigned i, j;
 
 	for (i = 0; i < HID_REPORT_TYPES; i++) {
@@ -562,11 +568,34 @@ static void hid_device_release(struct device *dev)
 			if (report)
 				hid_free_report(report);
 		}
+		memset(report_enum, 0, sizeof(*report_enum));
+		INIT_LIST_HEAD(&report_enum->report_list);
 	}
 
 	kfree(device->rdesc);
+	device->rdesc = NULL;
+	device->rsize = 0;
+
 	kfree(device->collection);
-	kfree(device);
+	device->collection = NULL;
+	device->collection_size = 0;
+	device->maxcollection = 0;
+	device->maxapplication = 0;
+
+	device->status &= ~HID_STAT_PARSED;
+}
+
+/*
+ * Free a device structure, all reports, and all fields.
+ */
+
+static void hid_device_release(struct device *dev)
+{
+	struct hid_device *hid = container_of(dev, struct hid_device, dev);
+
+	hid_close_report(hid);
+	kfree(hid->dev_rdesc);
+	kfree(hid);
 }
 
 /*
@@ -636,6 +665,60 @@ static u8 *fetch_item(__u8 *start, __u8 *end, struct hid_item *item)
 	return NULL;
 }
 
+static void hid_scan_usage(struct hid_device *hid, u32 usage)
+{
+	if (usage == HID_DG_CONTACTID)
+		hid->group = HID_GROUP_MULTITOUCH;
+}
+
+/*
+ * Scan a report descriptor before the device is added to the bus.
+ * Sets device groups and other properties that determine what driver
+ * to load.
+ */
+static int hid_scan_report(struct hid_device *hid)
+{
+	unsigned int page = 0, delim = 0;
+	__u8 *start = hid->dev_rdesc;
+	__u8 *end = start + hid->dev_rsize;
+	unsigned int u, u_min = 0, u_max = 0;
+	struct hid_item item;
+
+	hid->group = HID_GROUP_GENERIC;
+	while ((start = fetch_item(start, end, &item)) != NULL) {
+		if (item.format != HID_ITEM_FORMAT_SHORT)
+			return -EINVAL;
+		if (item.type == HID_ITEM_TYPE_GLOBAL) {
+			if (item.tag == HID_GLOBAL_ITEM_TAG_USAGE_PAGE)
+				page = item_udata(&item) << 16;
+		} else if (item.type == HID_ITEM_TYPE_LOCAL) {
+			if (delim > 1)
+				break;
+			u = item_udata(&item);
+			if (item.size <= 2)
+				u += page;
+			switch (item.tag) {
+			case HID_LOCAL_ITEM_TAG_DELIMITER:
+				delim += !!u;
+				break;
+			case HID_LOCAL_ITEM_TAG_USAGE:
+				hid_scan_usage(hid, u);
+				break;
+			case HID_LOCAL_ITEM_TAG_USAGE_MINIMUM:
+				u_min = u;
+				break;
+			case HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM:
+				u_max = u;
+				for (u = u_min; u <= u_max; u++)
+					hid_scan_usage(hid, u);
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
 /**
  * hid_parse_report - parse device report
  *
@@ -643,15 +726,37 @@ static u8 *fetch_item(__u8 *start, __u8 *end, struct hid_item *item)
  * @start: report start
  * @size: report size
  *
+ * Allocate the device report as read by the bus driver. This function should
+ * only be called from parse() in ll drivers.
+ */
+int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size)
+{
+	hid->dev_rdesc = kmemdup(start, size, GFP_KERNEL);
+	if (!hid->dev_rdesc)
+		return -ENOMEM;
+	hid->dev_rsize = size;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(hid_parse_report);
+
+/**
+ * hid_open_report - open a driver-specific device report
+ *
+ * @device: hid device
+ *
  * Parse a report description into a hid_device structure. Reports are
  * enumerated, fields are attached to these reports.
  * 0 returned on success, otherwise nonzero error value.
+ *
+ * This function (or the equivalent hid_parse() macro) should only be
+ * called from probe() in drivers, before starting the device.
  */
-int hid_parse_report(struct hid_device *device, __u8 *start,
-		unsigned size)
+int hid_open_report(struct hid_device *device)
 {
 	struct hid_parser *parser;
 	struct hid_item item;
+	unsigned int size;
+	__u8 *start;
 	__u8 *end;
 	int ret;
 	static int (*dispatch_type[])(struct hid_parser *parser,
@@ -662,6 +767,14 @@ int hid_parse_report(struct hid_device *device, __u8 *start,
 		hid_parser_reserved
 	};
 
+	if (WARN_ON(device->status & HID_STAT_PARSED))
+		return -EBUSY;
+
+	start = device->dev_rdesc;
+	if (WARN_ON(!start))
+		return -ENODEV;
+	size = device->dev_rsize;
+
 	if (device->driver->report_fixup)
 		start = device->driver->report_fixup(device, start, &size);
 
@@ -679,6 +792,15 @@ int hid_parse_report(struct hid_device *device, __u8 *start,
 	parser->device = device;
 
 	end = start + size;
+
+	device->collection = kcalloc(HID_DEFAULT_NUM_COLLECTIONS,
+				     sizeof(struct hid_collection), GFP_KERNEL);
+	if (!device->collection) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	device->collection_size = HID_DEFAULT_NUM_COLLECTIONS;
+
 	ret = -EINVAL;
 	while ((start = fetch_item(start, end, &item)) != NULL) {
 
@@ -704,6 +826,7 @@ int hid_parse_report(struct hid_device *device, __u8 *start,
 				goto err;
 			}
 			vfree(parser);
+			device->status |= HID_STAT_PARSED;
 			return 0;
 		}
 	}
@@ -711,9 +834,10 @@ int hid_parse_report(struct hid_device *device, __u8 *start,
 	hid_err(device, "item fetching failed at offset %d\n", (int)(end - start));
 err:
 	vfree(parser);
+	hid_close_report(device);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(hid_parse_report);
+EXPORT_SYMBOL_GPL(hid_open_report);
 
 /*
  * Convert a signed n-bit integer to signed 32-bit integer. Common
@@ -1032,7 +1156,7 @@ static struct hid_report *hid_get_report(struct hid_report_enum *report_enum,
 	return report;
 }
 
-void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
+int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
 		int interrupt)
 {
 	struct hid_report_enum *report_enum = hid->report_enum + type;
@@ -1040,10 +1164,11 @@ void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
 	unsigned int a;
 	int rsize, csize = size;
 	u8 *cdata = data;
+	int ret = 0;
 
 	report = hid_get_report(report_enum, data);
 	if (!report)
-		return;
+		goto out;
 
 	if (report_enum->numbered) {
 		cdata++;
@@ -1063,14 +1188,19 @@ void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
 
 	if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_report_event)
 		hid->hiddev_report_event(hid, report);
-	if (hid->claimed & HID_CLAIMED_HIDRAW)
-		hidraw_report_event(hid, data, size);
+	if (hid->claimed & HID_CLAIMED_HIDRAW) {
+		ret = hidraw_report_event(hid, data, size);
+		if (ret)
+			goto out;
+	}
 
 	for (a = 0; a < report->maxfield; a++)
 		hid_input_field(hid, report->field[a], cdata, interrupt);
 
 	if (hid->claimed & HID_CLAIMED_INPUT)
 		hidinput_report_event(hid, report);
+out:
+	return ret;
 }
 EXPORT_SYMBOL_GPL(hid_report_raw_event);
 
@@ -1147,7 +1277,7 @@ nomem:
 		}
 	}
 
-	hid_report_raw_event(hid, type, data, size, interrupt);
+	ret = hid_report_raw_event(hid, type, data, size, interrupt);
 
 unlock:
 	up(&hid->driver_lock);
@@ -1158,7 +1288,8 @@ EXPORT_SYMBOL_GPL(hid_input_report);
 static bool hid_match_one_id(struct hid_device *hdev,
 		const struct hid_device_id *id)
 {
-	return id->bus == hdev->bus &&
+	return (id->bus == HID_BUS_ANY || id->bus == hdev->bus) &&
+		(id->group == HID_GROUP_ANY || id->group == hdev->group) &&
 		(id->vendor == HID_ANY_ID || id->vendor == hdev->vendor) &&
 		(id->product == HID_ANY_ID || id->product == hdev->product);
 }
@@ -1234,10 +1365,6 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask)
 	if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev,
 				connect_mask & HID_CONNECT_HIDINPUT_FORCE))
 		hdev->claimed |= HID_CLAIMED_INPUT;
-	if (hdev->quirks & HID_QUIRK_MULTITOUCH) {
-		/* this device should be handled by hid-multitouch, skip it */
-		return -ENODEV;
-	}
 
 	if ((connect_mask & HID_CONNECT_HIDDEV) && hdev->hiddev_connect &&
 			!hdev->hiddev_connect(hdev,
@@ -1314,13 +1441,10 @@ EXPORT_SYMBOL_GPL(hid_disconnect);
 
 /* a list of devices for which there is a specialized driver on HID bus */
 static const struct hid_device_id hid_have_special_driver[] = {
-	{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_RP_649) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0x0802) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ACTIONSTAR, USB_DEVICE_ID_ACTIONSTAR_1011) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
@@ -1385,60 +1509,33 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_AUREAL, USB_DEVICE_ID_AUREAL_W01RN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_PIXCIR_MULTI_TOUCH) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_10_1) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_TRUETOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2515) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
-	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_FRUCTEL, USB_DEVICE_ID_GAMETEL_MT_MODE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH, USB_DEVICE_ID_GOODTOUCH_000f) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_HANVON, USB_DEVICE_ID_HANVON_MULTITOUCH) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT, USB_DEVICE_ID_HANVON_ALT_MULTITOUCH) },
- 	{ HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM, USB_DEVICE_ID_IDEACOM_IDC6650) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ILITEK, USB_DEVICE_ID_ILITEK_MULTITOUCH) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_IRTOUCHSYSTEMS, USB_DEVICE_ID_IRTOUCH_INFRARED_USB) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
@@ -1447,7 +1544,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_LG, USB_DEVICE_ID_LG_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) },
@@ -1480,8 +1576,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH_DUAL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500) },
@@ -1513,15 +1607,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PANASONIC, USB_DEVICE_ID_PANABOARD_UBT780) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PANASONIC, USB_DEVICE_ID_PANABOARD_UBT880) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_PCI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) },
@@ -1538,9 +1625,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM, USB_DEVICE_ID_MTP_STM) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX, USB_DEVICE_ID_MTP_SITRONIX) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
@@ -1554,16 +1638,13 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL, USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0709) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD) },
@@ -1578,16 +1659,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_PID_0038) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_XAT, USB_DEVICE_ID_XAT_CSR) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_SPX) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_MPX) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_CSR) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_SPX1) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_MPX1) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_CSR1) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_SPX2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_MPX2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_XIROKU, USB_DEVICE_ID_XIROKU_CSR2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
@@ -1631,6 +1703,7 @@ static ssize_t store_new_id(struct device_driver *drv, const char *buf,
 		return -ENOMEM;
 
 	dynid->id.bus = bus;
+	dynid->id.group = HID_GROUP_ANY;
 	dynid->id.vendor = vendor;
 	dynid->id.product = product;
 	dynid->id.driver_data = driver_data;
@@ -1679,18 +1752,7 @@ static int hid_bus_match(struct device *dev, struct device_driver *drv)
 	struct hid_driver *hdrv = container_of(drv, struct hid_driver, driver);
 	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
 
-	if ((hdev->quirks & HID_QUIRK_MULTITOUCH) &&
-		!strncmp(hdrv->name, "hid-multitouch", 14))
-		return 1;
-
-	if (!hid_match_device(hdev, hdrv))
-		return 0;
-
-	/* generic wants all that don't have specialized driver */
-	if (!strncmp(hdrv->name, "generic-", 8) && !hid_ignore_special_drivers)
-		return !hid_match_id(hdev, hid_have_special_driver);
-
-	return 1;
+	return hid_match_device(hdev, hdrv) != NULL;
 }
 
 static int hid_device_probe(struct device *dev)
@@ -1707,23 +1769,22 @@ static int hid_device_probe(struct device *dev)
 	if (!hdev->driver) {
 		id = hid_match_device(hdev, hdrv);
 		if (id == NULL) {
-			if (!((hdev->quirks & HID_QUIRK_MULTITOUCH) &&
-				!strncmp(hdrv->name, "hid-multitouch", 14))) {
-				ret = -ENODEV;
-				goto unlock;
-			}
+			ret = -ENODEV;
+			goto unlock;
 		}
 
 		hdev->driver = hdrv;
 		if (hdrv->probe) {
 			ret = hdrv->probe(hdev, id);
 		} else { /* default probe */
-			ret = hid_parse(hdev);
+			ret = hid_open_report(hdev);
 			if (!ret)
 				ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
 		}
-		if (ret)
+		if (ret) {
+			hid_close_report(hdev);
 			hdev->driver = NULL;
+		}
 	}
 unlock:
 	up(&hdev->driver_lock);
@@ -1744,6 +1805,7 @@ static int hid_device_remove(struct device *dev)
 			hdrv->remove(hdev);
 		else /* default remove */
 			hid_hw_stop(hdev);
+		hid_close_report(hdev);
 		hdev->driver = NULL;
 	}
 
@@ -1751,6 +1813,23 @@ static int hid_device_remove(struct device *dev)
 	return 0;
 }
 
+static ssize_t modalias_show(struct device *dev, struct device_attribute *a,
+			     char *buf)
+{
+	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+	int len;
+
+	len = snprintf(buf, PAGE_SIZE, "hid:b%04Xg%04Xv%08Xp%08X\n",
+		       hdev->bus, hdev->group, hdev->vendor, hdev->product);
+
+	return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len;
+}
+
+static struct device_attribute hid_dev_attrs[] = {
+	__ATTR_RO(modalias),
+	__ATTR_NULL,
+};
+
 static int hid_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
@@ -1768,8 +1847,8 @@ static int hid_uevent(struct device *dev, struct kobj_uevent_env *env)
 	if (add_uevent_var(env, "HID_UNIQ=%s", hdev->uniq))
 		return -ENOMEM;
 
-	if (add_uevent_var(env, "MODALIAS=hid:b%04Xv%08Xp%08X",
-			hdev->bus, hdev->vendor, hdev->product))
+	if (add_uevent_var(env, "MODALIAS=hid:b%04Xg%04Xv%08Xp%08X",
+			   hdev->bus, hdev->group, hdev->vendor, hdev->product))
 		return -ENOMEM;
 
 	return 0;
@@ -1777,6 +1856,7 @@ static int hid_uevent(struct device *dev, struct kobj_uevent_env *env)
 
 static struct bus_type hid_bus_type = {
 	.name		= "hid",
+	.dev_attrs	= hid_dev_attrs,
 	.match		= hid_bus_match,
 	.probe		= hid_device_probe,
 	.remove		= hid_device_remove,
@@ -2075,6 +2155,26 @@ int hid_add_device(struct hid_device *hdev)
             && (hid_ignore(hdev) || (hdev->quirks & HID_QUIRK_IGNORE)))
 		return -ENODEV;
 
+	/*
+	 * Read the device report descriptor once and use as template
+	 * for the driver-specific modifications.
+	 */
+	ret = hdev->ll_driver->parse(hdev);
+	if (ret)
+		return ret;
+	if (!hdev->dev_rdesc)
+		return -ENODEV;
+
+	/*
+	 * Scan generic devices for group information
+	 */
+	if (hid_ignore_special_drivers ||
+	    !hid_match_id(hdev, hid_have_special_driver)) {
+		ret = hid_scan_report(hdev);
+		if (ret)
+			hid_warn(hdev, "bad device descriptor (%d)\n", ret);
+	}
+
 	/* XXX hack, any other cleaner solution after the driver core
 	 * is converted to allow more than 20 bytes as the device name? */
 	dev_set_name(&hdev->dev, "%04X:%04X:%04X.%04X", hdev->bus,
@@ -2103,7 +2203,6 @@ EXPORT_SYMBOL_GPL(hid_add_device);
 struct hid_device *hid_allocate_device(void)
 {
 	struct hid_device *hdev;
-	unsigned int i;
 	int ret = -ENOMEM;
 
 	hdev = kzalloc(sizeof(*hdev), GFP_KERNEL);
@@ -2114,23 +2213,13 @@ struct hid_device *hid_allocate_device(void)
 	hdev->dev.release = hid_device_release;
 	hdev->dev.bus = &hid_bus_type;
 
-	hdev->collection = kcalloc(HID_DEFAULT_NUM_COLLECTIONS,
-			sizeof(struct hid_collection), GFP_KERNEL);
-	if (hdev->collection == NULL)
-		goto err;
-	hdev->collection_size = HID_DEFAULT_NUM_COLLECTIONS;
-
-	for (i = 0; i < HID_REPORT_TYPES; i++)
-		INIT_LIST_HEAD(&hdev->report_enum[i].report_list);
+	hid_close_report(hdev);
 
 	init_waitqueue_head(&hdev->debug_wait);
 	INIT_LIST_HEAD(&hdev->debug_list);
 	sema_init(&hdev->driver_lock, 1);
 
 	return hdev;
-err:
-	put_device(&hdev->dev);
-	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(hid_allocate_device);
 
@@ -2141,6 +2230,9 @@ static void hid_remove_device(struct hid_device *hdev)
 		hid_debug_unregister(hdev);
 		hdev->status &= ~HID_STAT_ADDED;
 	}
+	kfree(hdev->dev_rdesc);
+	hdev->dev_rdesc = NULL;
+	hdev->dev_rsize = 0;
 }
 
 /**
diff --git a/drivers/hid/hid-generic.c b/drivers/hid/hid-generic.c
new file mode 100644
index 000000000000..a8b3148e03a2
--- /dev/null
+++ b/drivers/hid/hid-generic.c
@@ -0,0 +1,53 @@
+/*
+ *  HID support for Linux
+ *
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ *  Copyright (c) 2007-2008 Oliver Neukum
+ *  Copyright (c) 2006-2012 Jiri Kosina
+ *  Copyright (c) 2012 Henrik Rydberg
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+#include <linux/hid.h>
+
+static const struct hid_device_id hid_table[] = {
+	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_GENERIC, HID_ANY_ID, HID_ANY_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, hid_table);
+
+static struct hid_driver hid_generic = {
+	.name = "hid-generic",
+	.id_table = hid_table,
+};
+
+static int __init hid_init(void)
+{
+	return hid_register_driver(&hid_generic);
+}
+
+static void __exit hid_exit(void)
+{
+	hid_unregister_driver(&hid_generic);
+}
+
+module_init(hid_init);
+module_exit(hid_exit);
+
+MODULE_AUTHOR("Henrik Rydberg");
+MODULE_DESCRIPTION("HID generic driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c
index 406632472c1b..3d62781b8993 100644
--- a/drivers/hid/hid-hyperv.c
+++ b/drivers/hid/hid-hyperv.c
@@ -430,6 +430,15 @@ cleanup:
 	return ret;
 }
 
+static int mousevsc_hid_parse(struct hid_device *hid)
+{
+	struct hv_device *dev = hid_get_drvdata(hid);
+	struct mousevsc_dev *input_dev = hv_get_drvdata(dev);
+
+	return hid_parse_report(hid, input_dev->report_desc,
+				input_dev->report_desc_size);
+}
+
 static int mousevsc_hid_open(struct hid_device *hid)
 {
 	return 0;
@@ -449,6 +458,7 @@ static void mousevsc_hid_stop(struct hid_device *hid)
 }
 
 static struct hid_ll_driver mousevsc_ll_driver = {
+	.parse = mousevsc_hid_parse,
 	.open = mousevsc_hid_open,
 	.close = mousevsc_hid_close,
 	.start = mousevsc_hid_start,
@@ -506,13 +516,14 @@ static int mousevsc_probe(struct hv_device *device,
 
 	sprintf(hid_dev->name, "%s", "Microsoft Vmbus HID-compliant Mouse");
 
+	hid_set_drvdata(hid_dev, device);
+
 	ret = hid_add_device(hid_dev);
 	if (ret)
 		goto probe_err1;
 
-	ret = hid_parse_report(hid_dev, input_dev->report_desc,
-				input_dev->report_desc_size);
 
+	ret = hid_parse(hid_dev);
 	if (ret) {
 		hid_err(hid_dev, "parse failed\n");
 		goto probe_err2;
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index e39aecb1f9f2..9373f535dfe9 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -154,9 +154,15 @@
 #define USB_DEVICE_ID_ATMEL_MULTITOUCH	0x211c
 #define USB_DEVICE_ID_ATMEL_MXT_DIGITIZER	0x2118
 
+#define USB_VENDOR_ID_AUREAL		0x0755
+#define USB_DEVICE_ID_AUREAL_W01RN	0x2626
+
 #define USB_VENDOR_ID_AVERMEDIA		0x07ca
 #define USB_DEVICE_ID_AVER_FM_MR800	0xb800
 
+#define USB_VENDOR_ID_BAANTO		0x2453
+#define USB_DEVICE_ID_BAANTO_MT_190W2	0x0100
+
 #define USB_VENDOR_ID_BELKIN		0x050d
 #define USB_DEVICE_ID_FLIP_KVM		0x3201
 
@@ -726,6 +732,7 @@
 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U	0x0004
 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U	0x0005
 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP1062	0x0064
+#define USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850	0x0522
 
 #define USB_VENDOR_ID_UNITEC	0x227d
 #define USB_DEVICE_ID_UNITEC_USB_TOUCH_0709	0x0709
@@ -749,6 +756,7 @@
 #define USB_DEVICE_ID_WALTOP_PID_0038			0x0038
 #define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH	0x0501
 #define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH	0x0500
+#define USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET	0x0502
 
 #define USB_VENDOR_ID_WISEGROUP		0x0925
 #define USB_DEVICE_ID_SMARTJOY_PLUS	0x0005
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 002781c5a616..132b0019365e 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -225,7 +225,10 @@ static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 	 * Verify and convert units.
 	 * See HID specification v1.11 6.2.2.7 Global Items for unit decoding
 	 */
-	if (code == ABS_X || code == ABS_Y || code == ABS_Z) {
+	switch (code) {
+	case ABS_X:
+	case ABS_Y:
+	case ABS_Z:
 		if (field->unit == 0x11) {		/* If centimeters */
 			/* Convert to millimeters */
 			unit_exponent += 1;
@@ -239,7 +242,13 @@ static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 		} else {
 			return 0;
 		}
-	} else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) {
+		break;
+
+	case ABS_RX:
+	case ABS_RY:
+	case ABS_RZ:
+	case ABS_TILT_X:
+	case ABS_TILT_Y:
 		if (field->unit == 0x14) {		/* If degrees */
 			/* Convert to radians */
 			prev = logical_extents;
@@ -250,7 +259,9 @@ static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 		} else if (field->unit != 0x12) {	/* If not radians */
 			return 0;
 		}
-	} else {
+		break;
+
+	default:
 		return 0;
 	}
 
@@ -623,6 +634,14 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			map_key_clear(BTN_TOOL_RUBBER);
 			break;
 
+		case 0x3d: /* X Tilt */
+			map_abs_clear(ABS_TILT_X);
+			break;
+
+		case 0x3e: /* Y Tilt */
+			map_abs_clear(ABS_TILT_Y);
+			break;
+
 		case 0x33: /* Touch */
 		case 0x42: /* TipSwitch */
 		case 0x43: /* TipSwitch2 */
@@ -638,10 +657,6 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			map_key_clear(BTN_STYLUS2);
 			break;
 
-		case 0x51: /* ContactID */
-			device->quirks |= HID_QUIRK_MULTITOUCH;
-			goto unknown;
-
 		default:  goto unknown;
 		}
 		break;
@@ -1208,13 +1223,6 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
 		}
 	}
 
-	if (hid->quirks & HID_QUIRK_MULTITOUCH) {
-		/* generic hid does not know how to handle multitouch devices */
-		if (hidinput)
-			goto out_cleanup;
-		goto out_unwind;
-	}
-
 	if (hidinput && input_register_device(hidinput->input))
 		goto out_cleanup;
 
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index e7a7bd1eb34a..fc37ed6b108c 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -109,23 +109,23 @@ static __u8 dfp_rdesc_fixed[] = {
 static __u8 *lg_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
-	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+	struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hdev);
 
-	if ((quirks & LG_RDESC) && *rsize >= 90 && rdesc[83] == 0x26 &&
+	if ((drv_data->quirks & LG_RDESC) && *rsize >= 90 && rdesc[83] == 0x26 &&
 			rdesc[84] == 0x8c && rdesc[85] == 0x02) {
 		hid_info(hdev,
 			 "fixing up Logitech keyboard report descriptor\n");
 		rdesc[84] = rdesc[89] = 0x4d;
 		rdesc[85] = rdesc[90] = 0x10;
 	}
-	if ((quirks & LG_RDESC_REL_ABS) && *rsize >= 50 &&
+	if ((drv_data->quirks & LG_RDESC_REL_ABS) && *rsize >= 50 &&
 			rdesc[32] == 0x81 && rdesc[33] == 0x06 &&
 			rdesc[49] == 0x81 && rdesc[50] == 0x06) {
 		hid_info(hdev,
 			 "fixing up rel/abs in Logitech report descriptor\n");
 		rdesc[33] = rdesc[50] = 0x02;
 	}
-	if ((quirks & LG_FF4) && *rsize >= 101 &&
+	if ((drv_data->quirks & LG_FF4) && *rsize >= 101 &&
 			rdesc[41] == 0x95 && rdesc[42] == 0x0B &&
 			rdesc[47] == 0x05 && rdesc[48] == 0x09) {
 		hid_info(hdev, "fixing up Logitech Speed Force Wireless button descriptor\n");
@@ -278,7 +278,7 @@ static int lg_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		  0,  0,  0,  0,  0,183,184,185,186,187,
 		188,189,190,191,192,193,194,  0,  0,  0
 	};
-	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+	struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hdev);
 	unsigned int hid = usage->hid;
 
 	if (hdev->product == USB_DEVICE_ID_LOGITECH_RECEIVER &&
@@ -289,7 +289,7 @@ static int lg_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 			lg_dinovo_mapping(hi, usage, bit, max))
 		return 1;
 
-	if ((quirks & LG_WIRELESS) && lg_wireless_mapping(hi, usage, bit, max))
+	if ((drv_data->quirks & LG_WIRELESS) && lg_wireless_mapping(hi, usage, bit, max))
 		return 1;
 
 	if ((hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
@@ -299,11 +299,11 @@ static int lg_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 
 	/* Special handling for Logitech Cordless Desktop */
 	if (field->application == HID_GD_MOUSE) {
-		if ((quirks & LG_IGNORE_DOUBLED_WHEEL) &&
+		if ((drv_data->quirks & LG_IGNORE_DOUBLED_WHEEL) &&
 				(hid == 7 || hid == 8))
 			return -1;
 	} else {
-		if ((quirks & LG_EXPANDED_KEYMAP) &&
+		if ((drv_data->quirks & LG_EXPANDED_KEYMAP) &&
 				hid < ARRAY_SIZE(e_keymap) &&
 				e_keymap[hid] != 0) {
 			hid_map_usage(hi, usage, bit, max, EV_KEY,
@@ -319,13 +319,13 @@ static int lg_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
-	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+	struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hdev);
 
-	if ((quirks & LG_BAD_RELATIVE_KEYS) && usage->type == EV_KEY &&
+	if ((drv_data->quirks & LG_BAD_RELATIVE_KEYS) && usage->type == EV_KEY &&
 			(field->flags & HID_MAIN_ITEM_RELATIVE))
 		field->flags &= ~HID_MAIN_ITEM_RELATIVE;
 
-	if ((quirks & LG_DUPLICATE_USAGES) && (usage->type == EV_KEY ||
+	if ((drv_data->quirks & LG_DUPLICATE_USAGES) && (usage->type == EV_KEY ||
 			 usage->type == EV_REL || usage->type == EV_ABS))
 		clear_bit(usage->code, *bit);
 
@@ -335,9 +335,9 @@ static int lg_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 static int lg_event(struct hid_device *hdev, struct hid_field *field,
 		struct hid_usage *usage, __s32 value)
 {
-	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+	struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hdev);
 
-	if ((quirks & LG_INVERT_HWHEEL) && usage->code == REL_HWHEEL) {
+	if ((drv_data->quirks & LG_INVERT_HWHEEL) && usage->code == REL_HWHEEL) {
 		input_event(field->hidinput->input, usage->type, usage->code,
 				-value);
 		return 1;
@@ -348,13 +348,20 @@ static int lg_event(struct hid_device *hdev, struct hid_field *field,
 
 static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
-	unsigned long quirks = id->driver_data;
 	unsigned int connect_mask = HID_CONNECT_DEFAULT;
+	struct lg_drv_data *drv_data;
 	int ret;
 
-	hid_set_drvdata(hdev, (void *)quirks);
+	drv_data = kzalloc(sizeof(struct lg_drv_data), GFP_KERNEL);
+	if (!drv_data) {
+		hid_err(hdev, "Insufficient memory, cannot allocate driver data\n");
+		return -ENOMEM;
+	}
+	drv_data->quirks = id->driver_data;
+	
+	hid_set_drvdata(hdev, (void *)drv_data);
 
-	if (quirks & LG_NOGET)
+	if (drv_data->quirks & LG_NOGET)
 		hdev->quirks |= HID_QUIRK_NOGET;
 
 	ret = hid_parse(hdev);
@@ -363,7 +370,7 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		goto err_free;
 	}
 
-	if (quirks & (LG_FF | LG_FF2 | LG_FF3 | LG_FF4))
+	if (drv_data->quirks & (LG_FF | LG_FF2 | LG_FF3 | LG_FF4))
 		connect_mask &= ~HID_CONNECT_FF;
 
 	ret = hid_hw_start(hdev, connect_mask);
@@ -392,27 +399,29 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		}
 	}
 
-	if (quirks & LG_FF)
+	if (drv_data->quirks & LG_FF)
 		lgff_init(hdev);
-	if (quirks & LG_FF2)
+	if (drv_data->quirks & LG_FF2)
 		lg2ff_init(hdev);
-	if (quirks & LG_FF3)
+	if (drv_data->quirks & LG_FF3)
 		lg3ff_init(hdev);
-	if (quirks & LG_FF4)
+	if (drv_data->quirks & LG_FF4)
 		lg4ff_init(hdev);
 
 	return 0;
 err_free:
+	kfree(drv_data);
 	return ret;
 }
 
 static void lg_remove(struct hid_device *hdev)
 {
-	unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
-	if(quirks & LG_FF4)
+	struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hdev);
+	if (drv_data->quirks & LG_FF4)
 		lg4ff_deinit(hdev);
 
 	hid_hw_stop(hdev);
+	kfree(drv_data);
 }
 
 static const struct hid_device_id lg_devices[] = {
diff --git a/drivers/hid/hid-lg.h b/drivers/hid/hid-lg.h
index 4b097286dc78..d64cf8d2751e 100644
--- a/drivers/hid/hid-lg.h
+++ b/drivers/hid/hid-lg.h
@@ -1,6 +1,11 @@
 #ifndef __HID_LG_H
 #define __HID_LG_H
 
+struct lg_drv_data {
+	unsigned long quirks;
+	void *device_props;	/* Device specific properties */
+};
+
 #ifdef CONFIG_LOGITECH_FF
 int lgff_init(struct hid_device *hdev);
 #else
diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c
index 6ecc9e220440..f3390ee6105c 100644
--- a/drivers/hid/hid-lg4ff.c
+++ b/drivers/hid/hid-lg4ff.c
@@ -1,7 +1,8 @@
 /*
- *  Force feedback support for Logitech Speed Force Wireless
+ *  Force feedback support for Logitech Gaming Wheels
  *
- *  http://wiibrew.org/wiki/Logitech_USB_steering_wheel
+ *  Including G27, G25, DFP, DFGT, FFEX, Momo, Momo2 &
+ *  Speed Force Wireless (WiiWheel)
  *
  *  Copyright (c) 2010 Simon Wood <simon@mungewell.org>
  */
@@ -51,20 +52,18 @@ static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *at
 
 static DEVICE_ATTR(range, S_IRWXU | S_IRWXG | S_IRWXO, lg4ff_range_show, lg4ff_range_store);
 
-static bool list_inited;
-
 struct lg4ff_device_entry {
-	char  *device_id;	/* Use name in respective kobject structure's address as the ID */
 	__u16 range;
 	__u16 min_range;
 	__u16 max_range;
-	__u8  leds;
+#ifdef CONFIG_LEDS_CLASS
+	__u8  led_state;
+	struct led_classdev *led[5];
+#endif
 	struct list_head list;
 	void (*set_range)(struct hid_device *hid, u16 range);
 };
 
-static struct lg4ff_device_entry device_list;
-
 static const signed short lg4ff_wheel_effects[] = {
 	FF_CONSTANT,
 	FF_AUTOCENTER,
@@ -285,18 +284,20 @@ static void hid_lg4ff_switch_native(struct hid_device *hid, const struct lg4ff_n
 /* Read current range and display it in terminal */
 static ssize_t lg4ff_range_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct lg4ff_device_entry *uninitialized_var(entry);
-	struct list_head *h;
 	struct hid_device *hid = to_hid_device(dev);
+	struct lg4ff_device_entry *entry;
+	struct lg_drv_data *drv_data;
 	size_t count;
 
-	list_for_each(h, &device_list.list) {
-		entry = list_entry(h, struct lg4ff_device_entry, list);
-		if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0)
-			break;
+	drv_data = hid_get_drvdata(hid);
+	if (!drv_data) {
+		hid_err(hid, "Private driver data not found!\n");
+		return 0;
 	}
-	if (h == &device_list.list) {
-		dbg_hid("Device not found!");
+
+	entry = drv_data->device_props;
+	if (!entry) {
+		hid_err(hid, "Device properties not found!\n");
 		return 0;
 	}
 
@@ -308,19 +309,21 @@ static ssize_t lg4ff_range_show(struct device *dev, struct device_attribute *att
  * according to the type of the wheel */
 static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct lg4ff_device_entry *uninitialized_var(entry);
-	struct list_head *h;
 	struct hid_device *hid = to_hid_device(dev);
+	struct lg4ff_device_entry *entry;
+	struct lg_drv_data *drv_data;
 	__u16 range = simple_strtoul(buf, NULL, 10);
 
-	list_for_each(h, &device_list.list) {
-		entry = list_entry(h, struct lg4ff_device_entry, list);
-		if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0)
-			break;
+	drv_data = hid_get_drvdata(hid);
+	if (!drv_data) {
+		hid_err(hid, "Private driver data not found!\n");
+		return 0;
 	}
-	if (h == &device_list.list) {
-		dbg_hid("Device not found!");
-		return count;
+
+	entry = drv_data->device_props;
+	if (!entry) {
+		hid_err(hid, "Device properties not found!\n");
+		return 0;
 	}
 
 	if (range == 0)
@@ -336,6 +339,88 @@ static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *at
 	return count;
 }
 
+#ifdef CONFIG_LEDS_CLASS
+static void lg4ff_set_leds(struct hid_device *hid, __u8 leds)
+{
+	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+
+	report->field[0]->value[0] = 0xf8;
+	report->field[0]->value[1] = 0x12;
+	report->field[0]->value[2] = leds;
+	report->field[0]->value[3] = 0x00;
+	report->field[0]->value[4] = 0x00;
+	report->field[0]->value[5] = 0x00;
+	report->field[0]->value[6] = 0x00;
+	usbhid_submit_report(hid, report, USB_DIR_OUT);
+}
+
+static void lg4ff_led_set_brightness(struct led_classdev *led_cdev,
+			enum led_brightness value)
+{
+	struct device *dev = led_cdev->dev->parent;
+	struct hid_device *hid = container_of(dev, struct hid_device, dev);
+	struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hid);
+	struct lg4ff_device_entry *entry;
+	int i, state = 0;
+
+	if (!drv_data) {
+		hid_err(hid, "Device data not found.");
+		return;
+	}
+
+	entry = (struct lg4ff_device_entry *)drv_data->device_props;
+
+	if (!entry) {
+		hid_err(hid, "Device properties not found.");
+		return;
+	}
+
+	for (i = 0; i < 5; i++) {
+		if (led_cdev != entry->led[i])
+			continue;
+		state = (entry->led_state >> i) & 1;
+		if (value == LED_OFF && state) {
+			entry->led_state &= ~(1 << i);
+			lg4ff_set_leds(hid, entry->led_state);
+		} else if (value != LED_OFF && !state) {
+			entry->led_state |= 1 << i;
+			lg4ff_set_leds(hid, entry->led_state);
+		}
+		break;
+	}
+}
+
+static enum led_brightness lg4ff_led_get_brightness(struct led_classdev *led_cdev)
+{
+	struct device *dev = led_cdev->dev->parent;
+	struct hid_device *hid = container_of(dev, struct hid_device, dev);
+	struct lg_drv_data *drv_data = (struct lg_drv_data *)hid_get_drvdata(hid);
+	struct lg4ff_device_entry *entry;
+	int i, value = 0;
+
+	if (!drv_data) {
+		hid_err(hid, "Device data not found.");
+		return LED_OFF;
+	}
+
+	entry = (struct lg4ff_device_entry *)drv_data->device_props;
+
+	if (!entry) {
+		hid_err(hid, "Device properties not found.");
+		return LED_OFF;
+	}
+
+	for (i = 0; i < 5; i++)
+		if (led_cdev == entry->led[i]) {
+			value = (entry->led_state >> i) & 1;
+			break;
+		}
+
+	return value ? LED_FULL : LED_OFF;
+}
+#endif
+
 int lg4ff_init(struct hid_device *hid)
 {
 	struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
@@ -344,6 +429,7 @@ int lg4ff_init(struct hid_device *hid)
 	struct hid_report *report;
 	struct hid_field *field;
 	struct lg4ff_device_entry *entry;
+	struct lg_drv_data *drv_data;
 	struct usb_device_descriptor *udesc;
 	int error, i, j;
 	__u16 bcdDevice, rev_maj, rev_min;
@@ -423,28 +509,24 @@ int lg4ff_init(struct hid_device *hid)
 		dev->ff->set_autocenter(dev, 0);
 	}
 
-		/* Initialize device_list if this is the first device to handle by lg4ff */
-	if (!list_inited) {
-		INIT_LIST_HEAD(&device_list.list);
-		list_inited = 1;
+	/* Get private driver data */
+	drv_data = hid_get_drvdata(hid);
+	if (!drv_data) {
+		hid_err(hid, "Cannot add device, private driver data not allocated\n");
+		return -1;
 	}
 
-	/* Add the device to device_list */
+	/* Initialize device properties */
 	entry = kzalloc(sizeof(struct lg4ff_device_entry), GFP_KERNEL);
 	if (!entry) {
-		hid_err(hid, "Cannot add device, insufficient memory.\n");
-		return -ENOMEM;
-	}
-	entry->device_id = kstrdup((&hid->dev)->kobj.name, GFP_KERNEL);
-	if (!entry->device_id) {
-		hid_err(hid, "Cannot set device_id, insufficient memory.\n");
-		kfree(entry);
+		hid_err(hid, "Cannot add device, insufficient memory to allocate device properties.\n");
 		return -ENOMEM;
 	}
+	drv_data->device_props = entry;
+
 	entry->min_range = lg4ff_devices[i].min_range;
 	entry->max_range = lg4ff_devices[i].max_range;
 	entry->set_range = lg4ff_devices[i].set_range;
-	list_add(&entry->list, &device_list.list);
 
 	/* Create sysfs interface */
 	error = device_create_file(&hid->dev, &dev_attr_range);
@@ -457,32 +539,100 @@ int lg4ff_init(struct hid_device *hid)
 	if (entry->set_range != NULL)
 		entry->set_range(hid, entry->range);
 
-	hid_info(hid, "Force feedback for Logitech Speed Force Wireless by Simon Wood <simon@mungewell.org>\n");
+#ifdef CONFIG_LEDS_CLASS
+	/* register led subsystem - G27 only */
+	entry->led_state = 0;
+	for (j = 0; j < 5; j++)
+		entry->led[j] = NULL;
+
+	if (lg4ff_devices[i].product_id == USB_DEVICE_ID_LOGITECH_G27_WHEEL) {
+		struct led_classdev *led;
+		size_t name_sz;
+		char *name;
+
+		lg4ff_set_leds(hid, 0);
+
+		name_sz = strlen(dev_name(&hid->dev)) + 8;
+
+		for (j = 0; j < 5; j++) {
+			led = kzalloc(sizeof(struct led_classdev)+name_sz, GFP_KERNEL);
+			if (!led) {
+				hid_err(hid, "can't allocate memory for LED %d\n", j);
+				goto err;
+			}
+
+			name = (void *)(&led[1]);
+			snprintf(name, name_sz, "%s::RPM%d", dev_name(&hid->dev), j+1);
+			led->name = name;
+			led->brightness = 0;
+			led->max_brightness = 1;
+			led->brightness_get = lg4ff_led_get_brightness;
+			led->brightness_set = lg4ff_led_set_brightness;
+
+			entry->led[j] = led;
+			error = led_classdev_register(&hid->dev, led);
+
+			if (error) {
+				hid_err(hid, "failed to register LED %d. Aborting.\n", j);
+err:
+				/* Deregister LEDs (if any) */
+				for (j = 0; j < 5; j++) {
+					led = entry->led[j];
+					entry->led[j] = NULL;
+					if (!led)
+						continue;
+					led_classdev_unregister(led);
+					kfree(led);
+				}
+				goto out;	/* Let the driver continue without LEDs */
+			}
+		}
+	}
+out:
+#endif
+	hid_info(hid, "Force feedback support for Logitech Gaming Wheels\n");
 	return 0;
 }
 
 int lg4ff_deinit(struct hid_device *hid)
 {
-	bool found = 0;
 	struct lg4ff_device_entry *entry;
-	struct list_head *h, *g;
-	list_for_each_safe(h, g, &device_list.list) {
-		entry = list_entry(h, struct lg4ff_device_entry, list);
-		if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0) {
-			list_del(h);
-			kfree(entry->device_id);
-			kfree(entry);
-			found = 1;
-			break;
-		}
-	}
+	struct lg_drv_data *drv_data;
+
+	device_remove_file(&hid->dev, &dev_attr_range);
 
-	if (!found) {
-		dbg_hid("Device entry not found!\n");
+	drv_data = hid_get_drvdata(hid);
+	if (!drv_data) {
+		hid_err(hid, "Error while deinitializing device, no private driver data.\n");
+		return -1;
+	}
+	entry = drv_data->device_props;
+	if (!entry) {
+		hid_err(hid, "Error while deinitializing device, no device properties data.\n");
 		return -1;
 	}
 
-	device_remove_file(&hid->dev, &dev_attr_range);
+#ifdef CONFIG_LEDS_CLASS
+	{
+		int j;
+		struct led_classdev *led;
+
+		/* Deregister LEDs (if any) */
+		for (j = 0; j < 5; j++) {
+
+			led = entry->led[j];
+			entry->led[j] = NULL;
+			if (!led)
+				continue;
+			led_classdev_unregister(led);
+			kfree(led);
+		}
+	}
+#endif
+
+	/* Deallocate memory */
+	kfree(entry);
+
 	dbg_hid("Device successfully unregistered\n");
 	return 0;
 }
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 2b56efcbdf61..5e8a7ed42344 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -26,6 +26,7 @@
 #include <linux/hid.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <asm/unaligned.h>
 #include "usbhid/usbhid.h"
 #include "hid-ids.h"
 #include "hid-logitech-dj.h"
@@ -155,6 +156,14 @@ static const char media_descriptor[] = {
 /* Maximum size of all defined hid reports in bytes (including report id) */
 #define MAX_REPORT_SIZE 8
 
+/* Make sure all descriptors are present here */
+#define MAX_RDESC_SIZE				\
+	(sizeof(kbd_descriptor) +		\
+	 sizeof(mse_descriptor) +		\
+	 sizeof(consumer_descriptor) +		\
+	 sizeof(syscontrol_descriptor) +	\
+	 sizeof(media_descriptor))
+
 /* Number of possible hid report types that can be created by this driver.
  *
  * Right now, RF report types have the same report types (or report id's)
@@ -265,8 +274,8 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
 		goto dj_device_allocate_fail;
 	}
 
-	dj_dev->reports_supported = le32_to_cpu(
-		dj_report->report_params[DEVICE_PAIRED_RF_REPORT_TYPE]);
+	dj_dev->reports_supported = get_unaligned_le32(
+		dj_report->report_params + DEVICE_PAIRED_RF_REPORT_TYPE);
 	dj_dev->hdev = dj_hiddev;
 	dj_dev->dj_receiver_dev = djrcv_dev;
 	dj_dev->device_index = dj_report->device_index;
@@ -473,9 +482,17 @@ static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
 	return 0;
 }
 
+static void rdcat(char **rdesc, unsigned int *rsize, const char *data, unsigned int size)
+{
+	memcpy(*rdesc + *rsize, data, size);
+	*rsize += size;
+}
+
 static int logi_dj_ll_parse(struct hid_device *hid)
 {
 	struct dj_device *djdev = hid->driver_data;
+	unsigned int rsize = 0;
+	char *rdesc;
 	int retval;
 
 	dbg_hid("%s\n", __func__);
@@ -483,70 +500,38 @@ static int logi_dj_ll_parse(struct hid_device *hid)
 	djdev->hdev->version = 0x0111;
 	djdev->hdev->country = 0x00;
 
+	rdesc = kmalloc(MAX_RDESC_SIZE, GFP_KERNEL);
+	if (!rdesc)
+		return -ENOMEM;
+
 	if (djdev->reports_supported & STD_KEYBOARD) {
 		dbg_hid("%s: sending a kbd descriptor, reports_supported: %x\n",
 			__func__, djdev->reports_supported);
-		retval = hid_parse_report(hid,
-					  (u8 *) kbd_descriptor,
-					  sizeof(kbd_descriptor));
-		if (retval) {
-			dbg_hid("%s: sending a kbd descriptor, hid_parse failed"
-				" error: %d\n", __func__, retval);
-			return retval;
-		}
+		rdcat(&rdesc, &rsize, kbd_descriptor, sizeof(kbd_descriptor));
 	}
 
 	if (djdev->reports_supported & STD_MOUSE) {
 		dbg_hid("%s: sending a mouse descriptor, reports_supported: "
 			"%x\n", __func__, djdev->reports_supported);
-		retval = hid_parse_report(hid,
-					  (u8 *) mse_descriptor,
-					  sizeof(mse_descriptor));
-		if (retval) {
-			dbg_hid("%s: sending a mouse descriptor, hid_parse "
-				"failed error: %d\n", __func__, retval);
-			return retval;
-		}
+		rdcat(&rdesc, &rsize, mse_descriptor, sizeof(mse_descriptor));
 	}
 
 	if (djdev->reports_supported & MULTIMEDIA) {
 		dbg_hid("%s: sending a multimedia report descriptor: %x\n",
 			__func__, djdev->reports_supported);
-		retval = hid_parse_report(hid,
-					  (u8 *) consumer_descriptor,
-					  sizeof(consumer_descriptor));
-		if (retval) {
-			dbg_hid("%s: sending a consumer_descriptor, hid_parse "
-				"failed error: %d\n", __func__, retval);
-			return retval;
-		}
+		rdcat(&rdesc, &rsize, consumer_descriptor, sizeof(consumer_descriptor));
 	}
 
 	if (djdev->reports_supported & POWER_KEYS) {
 		dbg_hid("%s: sending a power keys report descriptor: %x\n",
 			__func__, djdev->reports_supported);
-		retval = hid_parse_report(hid,
-					  (u8 *) syscontrol_descriptor,
-					  sizeof(syscontrol_descriptor));
-		if (retval) {
-			dbg_hid("%s: sending a syscontrol_descriptor, "
-				"hid_parse failed error: %d\n",
-				__func__, retval);
-			return retval;
-		}
+		rdcat(&rdesc, &rsize, syscontrol_descriptor, sizeof(syscontrol_descriptor));
 	}
 
 	if (djdev->reports_supported & MEDIA_CENTER) {
 		dbg_hid("%s: sending a media center report descriptor: %x\n",
 			__func__, djdev->reports_supported);
-		retval = hid_parse_report(hid,
-					  (u8 *) media_descriptor,
-					  sizeof(media_descriptor));
-		if (retval) {
-			dbg_hid("%s: sending a media_descriptor, hid_parse "
-				"failed error: %d\n", __func__, retval);
-			return retval;
-		}
+		rdcat(&rdesc, &rsize, media_descriptor, sizeof(media_descriptor));
 	}
 
 	if (djdev->reports_supported & KBD_LEDS) {
@@ -554,7 +539,10 @@ static int logi_dj_ll_parse(struct hid_device *hid)
 			__func__, djdev->reports_supported);
 	}
 
-	return 0;
+	retval = hid_parse_report(hid, rdesc, rsize);
+	kfree(rdesc);
+
+	return retval;
 }
 
 static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type,
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 1d5b94167b52..6e3332a99976 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -70,9 +70,16 @@ struct mt_class {
 	bool is_indirect;	/* true for touchpads */
 };
 
+struct mt_fields {
+	unsigned usages[HID_MAX_FIELDS];
+	unsigned int length;
+};
+
 struct mt_device {
 	struct mt_slot curdata;	/* placeholder of incoming data */
 	struct mt_class mtclass;	/* our mt device class */
+	struct mt_fields *fields;	/* temporary placeholder for storing the
+					   multitouch fields */
 	unsigned last_field_index;	/* last field index of the report */
 	unsigned last_slot_field;	/* the last field of a slot */
 	__s8 inputmode;		/* InputMode HID feature, -1 if non-existent */
@@ -110,6 +117,9 @@ struct mt_device {
 
 #define MT_DEFAULT_MAXCONTACT	10
 
+#define MT_USB_DEVICE(v, p)	HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH, v, p)
+#define MT_BT_DEVICE(v, p)	HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_MULTITOUCH, v, p)
+
 /*
  * these device-dependent functions determine what slot corresponds
  * to a valid contact that was just read.
@@ -275,11 +285,15 @@ static void set_abs(struct input_dev *input, unsigned int code,
 	input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
 }
 
-static void set_last_slot_field(struct hid_usage *usage, struct mt_device *td,
+static void mt_store_field(struct hid_usage *usage, struct mt_device *td,
 		struct hid_input *hi)
 {
-	if (!test_bit(usage->hid, hi->input->absbit))
-		td->last_slot_field = usage->hid;
+	struct mt_fields *f = td->fields;
+
+	if (f->length >= HID_MAX_FIELDS)
+		return;
+
+	f->usages[f->length++] = usage->hid;
 }
 
 static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
@@ -330,7 +344,7 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 				cls->sn_move);
 			/* touchscreen emulation */
 			set_abs(hi->input, ABS_X, field, cls->sn_move);
-			set_last_slot_field(usage, td, hi);
+			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
 		case HID_GD_Y:
@@ -340,7 +354,7 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 				cls->sn_move);
 			/* touchscreen emulation */
 			set_abs(hi->input, ABS_Y, field, cls->sn_move);
-			set_last_slot_field(usage, td, hi);
+			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
 		}
@@ -349,24 +363,24 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 	case HID_UP_DIGITIZER:
 		switch (usage->hid) {
 		case HID_DG_INRANGE:
-			set_last_slot_field(usage, td, hi);
+			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
 		case HID_DG_CONFIDENCE:
-			set_last_slot_field(usage, td, hi);
+			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
 		case HID_DG_TIPSWITCH:
 			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
 			input_set_capability(hi->input, EV_KEY, BTN_TOUCH);
-			set_last_slot_field(usage, td, hi);
+			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
 		case HID_DG_CONTACTID:
 			if (!td->maxcontacts)
 				td->maxcontacts = MT_DEFAULT_MAXCONTACT;
 			input_mt_init_slots(hi->input, td->maxcontacts);
-			td->last_slot_field = usage->hid;
+			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			td->touches_by_report++;
 			return 1;
@@ -375,7 +389,7 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 					EV_ABS, ABS_MT_TOUCH_MAJOR);
 			set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field,
 				cls->sn_width);
-			set_last_slot_field(usage, td, hi);
+			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
 		case HID_DG_HEIGHT:
@@ -385,7 +399,7 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 				cls->sn_height);
 			input_set_abs_params(hi->input,
 					ABS_MT_ORIENTATION, 0, 1, 0, 0);
-			set_last_slot_field(usage, td, hi);
+			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
 		case HID_DG_TIPPRESSURE:
@@ -396,7 +410,7 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 			/* touchscreen emulation */
 			set_abs(hi->input, ABS_PRESSURE, field,
 				cls->sn_pressure);
-			set_last_slot_field(usage, td, hi);
+			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
 		case HID_DG_CONTACTCOUNT:
@@ -635,6 +649,31 @@ static void mt_set_maxcontacts(struct hid_device *hdev)
 	}
 }
 
+static void mt_post_parse_default_settings(struct mt_device *td)
+{
+	__s32 quirks = td->mtclass.quirks;
+
+	/* unknown serial device needs special quirks */
+	if (td->touches_by_report == 1) {
+		quirks |= MT_QUIRK_ALWAYS_VALID;
+		quirks &= ~MT_QUIRK_NOT_SEEN_MEANS_UP;
+		quirks &= ~MT_QUIRK_VALID_IS_INRANGE;
+		quirks &= ~MT_QUIRK_VALID_IS_CONFIDENCE;
+	}
+
+	td->mtclass.quirks = quirks;
+}
+
+static void mt_post_parse(struct mt_device *td)
+{
+	struct mt_fields *f = td->fields;
+
+	if (td->touches_by_report > 0) {
+		int field_count_per_touch = f->length / td->touches_by_report;
+		td->last_slot_field = f->usages[field_count_per_touch - 1];
+	}
+}
+
 static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	int ret, i;
@@ -654,7 +693,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	 * that emit events over several HID messages.
 	 */
 	hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
-	hdev->quirks &= ~HID_QUIRK_MULTITOUCH;
 
 	td = kzalloc(sizeof(struct mt_device), GFP_KERNEL);
 	if (!td) {
@@ -666,6 +704,13 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	td->maxcontact_report_id = -1;
 	hid_set_drvdata(hdev, td);
 
+	td->fields = kzalloc(sizeof(struct mt_fields), GFP_KERNEL);
+	if (!td->fields) {
+		dev_err(&hdev->dev, "cannot allocate multitouch fields data\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
 	ret = hid_parse(hdev);
 	if (ret != 0)
 		goto fail;
@@ -674,14 +719,10 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	if (ret)
 		goto fail;
 
-	if (!id && td->touches_by_report == 1) {
-		/* the device has been sent by hid-generic */
-		mtclass = &td->mtclass;
-		mtclass->quirks |= MT_QUIRK_ALWAYS_VALID;
-		mtclass->quirks &= ~MT_QUIRK_NOT_SEEN_MEANS_UP;
-		mtclass->quirks &= ~MT_QUIRK_VALID_IS_INRANGE;
-		mtclass->quirks &= ~MT_QUIRK_VALID_IS_CONFIDENCE;
-	}
+	mt_post_parse(td);
+
+	if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID)
+		mt_post_parse_default_settings(td);
 
 	td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot),
 				GFP_KERNEL);
@@ -697,9 +738,13 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	mt_set_maxcontacts(hdev);
 	mt_set_input_mode(hdev);
 
+	kfree(td->fields);
+	td->fields = NULL;
+
 	return 0;
 
 fail:
+	kfree(td->fields);
 	kfree(td);
 	return ret;
 }
@@ -727,50 +772,54 @@ static const struct hid_device_id mt_devices[] = {
 
 	/* 3M panels */
 	{ .driver_data = MT_CLS_3M,
-		HID_USB_DEVICE(USB_VENDOR_ID_3M,
+		MT_USB_DEVICE(USB_VENDOR_ID_3M,
 			USB_DEVICE_ID_3M1968) },
 	{ .driver_data = MT_CLS_3M,
-		HID_USB_DEVICE(USB_VENDOR_ID_3M,
+		MT_USB_DEVICE(USB_VENDOR_ID_3M,
 			USB_DEVICE_ID_3M2256) },
 	{ .driver_data = MT_CLS_3M,
-		HID_USB_DEVICE(USB_VENDOR_ID_3M,
+		MT_USB_DEVICE(USB_VENDOR_ID_3M,
 			USB_DEVICE_ID_3M3266) },
 
 	/* ActionStar panels */
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_ACTIONSTAR,
+		MT_USB_DEVICE(USB_VENDOR_ID_ACTIONSTAR,
 			USB_DEVICE_ID_ACTIONSTAR_1011) },
 
 	/* Atmel panels */
 	{ .driver_data = MT_CLS_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_ATMEL,
+		MT_USB_DEVICE(USB_VENDOR_ID_ATMEL,
 			USB_DEVICE_ID_ATMEL_MULTITOUCH) },
 	{ .driver_data = MT_CLS_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_ATMEL,
+		MT_USB_DEVICE(USB_VENDOR_ID_ATMEL,
 			USB_DEVICE_ID_ATMEL_MXT_DIGITIZER) },
 
+	/* Baanto multitouch devices */
+	{ .driver_data = MT_CLS_DEFAULT,
+		MT_USB_DEVICE(USB_VENDOR_ID_BAANTO,
+			USB_DEVICE_ID_BAANTO_MT_190W2) },
 	/* Cando panels */
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
-		HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+		MT_USB_DEVICE(USB_VENDOR_ID_CANDO,
 			USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
-		HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+		MT_USB_DEVICE(USB_VENDOR_ID_CANDO,
 			USB_DEVICE_ID_CANDO_MULTI_TOUCH_10_1) },
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
-		HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+		MT_USB_DEVICE(USB_VENDOR_ID_CANDO,
 			USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
-		HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+		MT_USB_DEVICE(USB_VENDOR_ID_CANDO,
 			USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
 
 	/* Chunghwa Telecom touch panels */
 	{  .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT,
+		MT_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT,
 			USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
 
 	/* CVTouch panels */
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH,
+		MT_USB_DEVICE(USB_VENDOR_ID_CVTOUCH,
 			USB_DEVICE_ID_CVTOUCH_SCREEN) },
 
 	/* Cypress panel */
@@ -780,225 +829,227 @@ static const struct hid_device_id mt_devices[] = {
 
 	/* eGalax devices (resistive) */
 	{ .driver_data = MT_CLS_EGALAX,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D) },
 	{ .driver_data = MT_CLS_EGALAX,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E) },
 
 	/* eGalax devices (capacitive) */
 	{ .driver_data = MT_CLS_EGALAX,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7207) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_722A) },
 	{ .driver_data = MT_CLS_EGALAX,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7262) },
 	{ .driver_data = MT_CLS_EGALAX,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72AA) },
 	{ .driver_data = MT_CLS_EGALAX,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA) },
 	{ .driver_data = MT_CLS_EGALAX,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7349) },
 	{ .driver_data = MT_CLS_EGALAX_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+		MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) },
 
 	/* Elo TouchSystems IntelliTouch Plus panel */
 	{ .driver_data = MT_CLS_DUAL_NSMU_CONTACTID,
-		HID_USB_DEVICE(USB_VENDOR_ID_ELO,
+		MT_USB_DEVICE(USB_VENDOR_ID_ELO,
 			USB_DEVICE_ID_ELO_TS2515) },
 
 	/* GeneralTouch panel */
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
-		HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH,
+		MT_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH,
 			USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
 
 	/* Gametel game controller */
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_FRUCTEL,
+		MT_BT_DEVICE(USB_VENDOR_ID_FRUCTEL,
 			USB_DEVICE_ID_GAMETEL_MT_MODE) },
 
 	/* GoodTouch panels */
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH,
+		MT_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH,
 			USB_DEVICE_ID_GOODTOUCH_000f) },
 
 	/* Hanvon panels */
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
-		HID_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT,
+		MT_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT,
 			USB_DEVICE_ID_HANVON_ALT_MULTITOUCH) },
 
 	/* Ideacom panel */
 	{ .driver_data = MT_CLS_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM,
+		MT_USB_DEVICE(USB_VENDOR_ID_IDEACOM,
 			USB_DEVICE_ID_IDEACOM_IDC6650) },
 	{ .driver_data = MT_CLS_SERIAL,
-		HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM,
+		MT_USB_DEVICE(USB_VENDOR_ID_IDEACOM,
 			USB_DEVICE_ID_IDEACOM_IDC6651) },
 
 	/* Ilitek dual touch panel */
 	{  .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_ILITEK,
+		MT_USB_DEVICE(USB_VENDOR_ID_ILITEK,
 			USB_DEVICE_ID_ILITEK_MULTITOUCH) },
 
 	/* IRTOUCH panels */
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
-		HID_USB_DEVICE(USB_VENDOR_ID_IRTOUCHSYSTEMS,
+		MT_USB_DEVICE(USB_VENDOR_ID_IRTOUCHSYSTEMS,
 			USB_DEVICE_ID_IRTOUCH_INFRARED_USB) },
 
 	/* LG Display panels */
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_LG,
+		MT_USB_DEVICE(USB_VENDOR_ID_LG,
 			USB_DEVICE_ID_LG_MULTITOUCH) },
 
 	/* Lumio panels */
 	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
-		HID_USB_DEVICE(USB_VENDOR_ID_LUMIO,
+		MT_USB_DEVICE(USB_VENDOR_ID_LUMIO,
 			USB_DEVICE_ID_CRYSTALTOUCH) },
 	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
-		HID_USB_DEVICE(USB_VENDOR_ID_LUMIO,
+		MT_USB_DEVICE(USB_VENDOR_ID_LUMIO,
 			USB_DEVICE_ID_CRYSTALTOUCH_DUAL) },
 
 	/* MosArt panels */
 	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
-		HID_USB_DEVICE(USB_VENDOR_ID_ASUS,
+		MT_USB_DEVICE(USB_VENDOR_ID_ASUS,
 			USB_DEVICE_ID_ASUS_T91MT)},
 	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
-		HID_USB_DEVICE(USB_VENDOR_ID_ASUS,
+		MT_USB_DEVICE(USB_VENDOR_ID_ASUS,
 			USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO) },
 	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
-		HID_USB_DEVICE(USB_VENDOR_ID_TURBOX,
+		MT_USB_DEVICE(USB_VENDOR_ID_TURBOX,
 			USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART) },
 
 	/* Panasonic panels */
 	{ .driver_data = MT_CLS_PANASONIC,
-		HID_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
+		MT_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
 			USB_DEVICE_ID_PANABOARD_UBT780) },
 	{ .driver_data = MT_CLS_PANASONIC,
-		HID_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
+		MT_USB_DEVICE(USB_VENDOR_ID_PANASONIC,
 			USB_DEVICE_ID_PANABOARD_UBT880) },
 
 	/* PenMount panels */
 	{ .driver_data = MT_CLS_CONFIDENCE,
-		HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT,
+		MT_USB_DEVICE(USB_VENDOR_ID_PENMOUNT,
 			USB_DEVICE_ID_PENMOUNT_PCI) },
 
 	/* PixArt optical touch screen */
 	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
-		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+		MT_USB_DEVICE(USB_VENDOR_ID_PIXART,
 			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN) },
 	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
-		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+		MT_USB_DEVICE(USB_VENDOR_ID_PIXART,
 			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1) },
 	{ .driver_data = MT_CLS_INRANGE_CONTACTNUMBER,
-		HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
+		MT_USB_DEVICE(USB_VENDOR_ID_PIXART,
 			USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2) },
 
 	/* PixCir-based panels */
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
-		HID_USB_DEVICE(USB_VENDOR_ID_HANVON,
+		MT_USB_DEVICE(USB_VENDOR_ID_HANVON,
 			USB_DEVICE_ID_HANVON_MULTITOUCH) },
 	{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTID,
-		HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
+		MT_USB_DEVICE(USB_VENDOR_ID_CANDO,
 			USB_DEVICE_ID_CANDO_PIXCIR_MULTI_TOUCH) },
 
 	/* Quanta-based panels */
 	{ .driver_data = MT_CLS_CONFIDENCE_CONTACT_ID,
-		HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+		MT_USB_DEVICE(USB_VENDOR_ID_QUANTA,
 			USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
 	{ .driver_data = MT_CLS_CONFIDENCE_CONTACT_ID,
-		HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+		MT_USB_DEVICE(USB_VENDOR_ID_QUANTA,
 			USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001) },
 	{ .driver_data = MT_CLS_CONFIDENCE_CONTACT_ID,
-		HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
+		MT_USB_DEVICE(USB_VENDOR_ID_QUANTA,
 			USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008) },
 
 	/* Stantum panels */
 	{ .driver_data = MT_CLS_CONFIDENCE,
-		HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
+		MT_USB_DEVICE(USB_VENDOR_ID_STANTUM,
 			USB_DEVICE_ID_MTP)},
 	{ .driver_data = MT_CLS_CONFIDENCE,
-		HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM,
+		MT_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM,
 			USB_DEVICE_ID_MTP_STM)},
 	{ .driver_data = MT_CLS_CONFIDENCE,
-		HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX,
+		MT_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX,
 			USB_DEVICE_ID_MTP_SITRONIX)},
 
 	/* TopSeed panels */
 	{ .driver_data = MT_CLS_TOPSEED,
-		HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2,
+		MT_USB_DEVICE(USB_VENDOR_ID_TOPSEED2,
 			USB_DEVICE_ID_TOPSEED2_PERIPAD_701) },
 
 	/* Touch International panels */
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL,
+		MT_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL,
 			USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH) },
 
 	/* Unitec panels */
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_UNITEC,
+		MT_USB_DEVICE(USB_VENDOR_ID_UNITEC,
 			USB_DEVICE_ID_UNITEC_USB_TOUCH_0709) },
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_UNITEC,
+		MT_USB_DEVICE(USB_VENDOR_ID_UNITEC,
 			USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) },
 	/* XAT */
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_XAT,
+		MT_USB_DEVICE(USB_VENDOR_ID_XAT,
 			USB_DEVICE_ID_XAT_CSR) },
 
 	/* Xiroku */
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+		MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
 			USB_DEVICE_ID_XIROKU_SPX) },
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+		MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
 			USB_DEVICE_ID_XIROKU_MPX) },
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+		MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
 			USB_DEVICE_ID_XIROKU_CSR) },
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+		MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
 			USB_DEVICE_ID_XIROKU_SPX1) },
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+		MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
 			USB_DEVICE_ID_XIROKU_MPX1) },
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+		MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
 			USB_DEVICE_ID_XIROKU_CSR1) },
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+		MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
 			USB_DEVICE_ID_XIROKU_SPX2) },
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+		MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
 			USB_DEVICE_ID_XIROKU_MPX2) },
 	{ .driver_data = MT_CLS_DEFAULT,
-		HID_USB_DEVICE(USB_VENDOR_ID_XIROKU,
+		MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
 			USB_DEVICE_ID_XIROKU_CSR2) },
 
+	/* Generic MT device */
+	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH, HID_ANY_ID, HID_ANY_ID) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, mt_devices);
diff --git a/drivers/hid/hid-uclogic.c b/drivers/hid/hid-uclogic.c
index 1f1128910337..3aba02be1f26 100644
--- a/drivers/hid/hid-uclogic.c
+++ b/drivers/hid/hid-uclogic.c
@@ -14,6 +14,7 @@
 #include <linux/device.h>
 #include <linux/hid.h>
 #include <linux/module.h>
+#include <linux/usb.h>
 
 #include "hid-ids.h"
 
@@ -352,9 +353,125 @@ static __u8 pf1209_rdesc_fixed[] = {
 	0xC0                /*  End Collection                      */
 };
 
+/*
+ * See TWHL850 description, device and HID report descriptors at
+ * http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Wireless_Tablet_TWHL850
+ */
+
+/* Size of the original descriptors of TWHL850 tablet */
+#define TWHL850_RDESC_ORIG_SIZE0	182
+#define TWHL850_RDESC_ORIG_SIZE1	161
+#define TWHL850_RDESC_ORIG_SIZE2	92
+
+/* Fixed PID 0522 tablet report descriptor, interface 0 (stylus) */
+static __u8 twhl850_rdesc_fixed0[] = {
+	0x05, 0x0D,         /*  Usage Page (Digitizer),             */
+	0x09, 0x02,         /*  Usage (Pen),                        */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x09,         /*      Report ID (9),                  */
+	0x09, 0x20,         /*      Usage (Stylus),                 */
+	0xA0,               /*      Collection (Physical),          */
+	0x14,               /*          Logical Minimum (0),        */
+	0x25, 0x01,         /*          Logical Maximum (1),        */
+	0x75, 0x01,         /*          Report Size (1),            */
+	0x95, 0x03,         /*          Report Count (3),           */
+	0x09, 0x42,         /*          Usage (Tip Switch),         */
+	0x09, 0x44,         /*          Usage (Barrel Switch),      */
+	0x09, 0x46,         /*          Usage (Tablet Pick),        */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x09, 0x32,         /*          Usage (In Range),           */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0x75, 0x10,         /*          Report Size (16),           */
+	0xA4,               /*          Push,                       */
+	0x05, 0x01,         /*          Usage Page (Desktop),       */
+	0x65, 0x13,         /*          Unit (Inch),                */
+	0x55, 0xFD,         /*          Unit Exponent (-3),         */
+	0x34,               /*          Physical Minimum (0),       */
+	0x09, 0x30,         /*          Usage (X),                  */
+	0x46, 0x40, 0x1F,   /*          Physical Maximum (8000),    */
+	0x26, 0x00, 0x7D,   /*          Logical Maximum (32000),    */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x09, 0x31,         /*          Usage (Y),                  */
+	0x46, 0x88, 0x13,   /*          Physical Maximum (5000),    */
+	0x26, 0x20, 0x4E,   /*          Logical Maximum (20000),    */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0xB4,               /*          Pop,                        */
+	0x09, 0x30,         /*          Usage (Tip Pressure),       */
+	0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),     */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0xC0,               /*      End Collection,                 */
+	0xC0                /*  End Collection                      */
+};
+
+/* Fixed PID 0522 tablet report descriptor, interface 1 (mouse) */
+static __u8 twhl850_rdesc_fixed1[] = {
+	0x05, 0x01,         /*  Usage Page (Desktop),               */
+	0x09, 0x02,         /*  Usage (Mouse),                      */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x01,         /*      Report ID (1),                  */
+	0x09, 0x01,         /*      Usage (Pointer),                */
+	0xA0,               /*      Collection (Physical),          */
+	0x05, 0x09,         /*          Usage Page (Button),        */
+	0x75, 0x01,         /*          Report Size (1),            */
+	0x95, 0x03,         /*          Report Count (3),           */
+	0x19, 0x01,         /*          Usage Minimum (01h),        */
+	0x29, 0x03,         /*          Usage Maximum (03h),        */
+	0x14,               /*          Logical Minimum (0),        */
+	0x25, 0x01,         /*          Logical Maximum (1),        */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x95, 0x05,         /*          Report Count (5),           */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0x05, 0x01,         /*          Usage Page (Desktop),       */
+	0x09, 0x30,         /*          Usage (X),                  */
+	0x09, 0x31,         /*          Usage (Y),                  */
+	0x16, 0x00, 0x80,   /*          Logical Minimum (-32768),   */
+	0x26, 0xFF, 0x7F,   /*          Logical Maximum (32767),    */
+	0x75, 0x10,         /*          Report Size (16),           */
+	0x95, 0x02,         /*          Report Count (2),           */
+	0x81, 0x06,         /*          Input (Variable, Relative), */
+	0x09, 0x38,         /*          Usage (Wheel),              */
+	0x15, 0xFF,         /*          Logical Minimum (-1),       */
+	0x25, 0x01,         /*          Logical Maximum (1),        */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x75, 0x08,         /*          Report Size (8),            */
+	0x81, 0x06,         /*          Input (Variable, Relative), */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0xC0,               /*      End Collection,                 */
+	0xC0                /*  End Collection                      */
+};
+
+/* Fixed PID 0522 tablet report descriptor, interface 2 (frame buttons) */
+static __u8 twhl850_rdesc_fixed2[] = {
+	0x05, 0x01,         /*  Usage Page (Desktop),               */
+	0x09, 0x06,         /*  Usage (Keyboard),                   */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x03,         /*      Report ID (3),                  */
+	0x05, 0x07,         /*      Usage Page (Keyboard),          */
+	0x14,               /*      Logical Minimum (0),            */
+	0x19, 0xE0,         /*      Usage Minimum (KB Leftcontrol), */
+	0x29, 0xE7,         /*      Usage Maximum (KB Right GUI),   */
+	0x25, 0x01,         /*      Logical Maximum (1),            */
+	0x75, 0x01,         /*      Report Size (1),                */
+	0x95, 0x08,         /*      Report Count (8),               */
+	0x81, 0x02,         /*      Input (Variable),               */
+	0x18,               /*      Usage Minimum (None),           */
+	0x29, 0xFF,         /*      Usage Maximum (FFh),            */
+	0x26, 0xFF, 0x00,   /*      Logical Maximum (255),          */
+	0x75, 0x08,         /*      Report Size (8),                */
+	0x95, 0x06,         /*      Report Count (6),               */
+	0x80,               /*      Input,                          */
+	0xC0                /*  End Collection                      */
+};
+
 static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 					unsigned int *rsize)
 {
+	struct usb_interface *iface = to_usb_interface(hdev->dev.parent);
+	__u8 iface_num = iface->cur_altsetting->desc.bInterfaceNumber;
+
 	switch (hdev->product) {
 	case USB_DEVICE_ID_UCLOGIC_TABLET_PF1209:
 		if (*rsize == PF1209_RDESC_ORIG_SIZE) {
@@ -386,6 +503,28 @@ static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 			*rsize = sizeof(wp1062_rdesc_fixed);
 		}
 		break;
+	case USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850:
+		switch (iface_num) {
+		case 0:
+			if (*rsize == TWHL850_RDESC_ORIG_SIZE0) {
+				rdesc = twhl850_rdesc_fixed0;
+				*rsize = sizeof(twhl850_rdesc_fixed0);
+			}
+			break;
+		case 1:
+			if (*rsize == TWHL850_RDESC_ORIG_SIZE1) {
+				rdesc = twhl850_rdesc_fixed1;
+				*rsize = sizeof(twhl850_rdesc_fixed1);
+			}
+			break;
+		case 2:
+			if (*rsize == TWHL850_RDESC_ORIG_SIZE2) {
+				rdesc = twhl850_rdesc_fixed2;
+				*rsize = sizeof(twhl850_rdesc_fixed2);
+			}
+			break;
+		}
+		break;
 	}
 
 	return rdesc;
@@ -402,6 +541,8 @@ static const struct hid_device_id uclogic_devices[] = {
 				USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
 				USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
+				USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, uclogic_devices);
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index 067e2963314c..fe23a1eb586b 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -24,15 +24,16 @@
 #include <linux/device.h>
 #include <linux/hid.h>
 #include <linux/module.h>
+#include <linux/leds.h>
 #include <linux/slab.h>
-#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 #include <linux/power_supply.h>
-#endif
 
 #include "hid-ids.h"
 
 #define PAD_DEVICE_ID	0x0F
 
+#define WAC_CMD_LED_CONTROL     0x20
+
 struct wacom_data {
 	__u16 tool;
 	__u16 butstate;
@@ -41,16 +42,20 @@ struct wacom_data {
 	__u32 id;
 	__u32 serial;
 	unsigned char high_speed;
-#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
-	int battery_capacity;
+	__u8 battery_capacity;
+	__u8 power_raw;
+	__u8 ps_connected;
 	struct power_supply battery;
 	struct power_supply ac;
-#endif
+	__u8 led_selector;
+	struct led_classdev *leds[4];
 };
 
-#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
-/*percent of battery capacity, 0 means AC online*/
-static unsigned short batcap[8] = { 1, 15, 25, 35, 50, 70, 100, 0 };
+/*percent of battery capacity for Graphire
+  8th value means AC online and show 100% capacity */
+static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 };
+/*percent of battery capacity for Intuos4 WL, AC has a separate bit*/
+static unsigned short batcap_i4[8] = { 1, 15, 30, 45, 60, 70, 85, 100 };
 
 static enum power_supply_property wacom_battery_props[] = {
 	POWER_SUPPLY_PROP_PRESENT,
@@ -64,13 +69,123 @@ static enum power_supply_property wacom_ac_props[] = {
 	POWER_SUPPLY_PROP_SCOPE,
 };
 
+static void wacom_leds_set_brightness(struct led_classdev *led_dev,
+						enum led_brightness value)
+{
+	struct device *dev = led_dev->dev->parent;
+	struct hid_device *hdev;
+	struct wacom_data *wdata;
+	unsigned char *buf;
+	__u8 led = 0;
+	int i;
+
+	hdev = container_of(dev, struct hid_device, dev);
+	wdata = hid_get_drvdata(hdev);
+	for (i = 0; i < 4; ++i) {
+		if (wdata->leds[i] == led_dev)
+			wdata->led_selector = i;
+	}
+
+	led = wdata->led_selector | 0x04;
+	buf = kzalloc(9, GFP_KERNEL);
+	if (buf) {
+		buf[0] = WAC_CMD_LED_CONTROL;
+		buf[1] = led;
+		buf[2] = value;
+		hdev->hid_output_raw_report(hdev, buf, 9, HID_FEATURE_REPORT);
+		kfree(buf);
+	}
+
+	return;
+}
+
+static enum led_brightness wacom_leds_get_brightness(struct led_classdev *led_dev)
+{
+	struct wacom_data *wdata;
+	struct device *dev = led_dev->dev->parent;
+	int value = 0;
+	int i;
+
+	wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev));
+
+	for (i = 0; i < 4; ++i) {
+		if (wdata->leds[i] == led_dev) {
+			value = wdata->leds[i]->brightness;
+			break;
+		}
+	}
+
+	return value;
+}
+
+
+static int wacom_initialize_leds(struct hid_device *hdev)
+{
+	struct wacom_data *wdata = hid_get_drvdata(hdev);
+	struct led_classdev *led;
+	struct device *dev = &hdev->dev;
+	size_t namesz = strlen(dev_name(dev)) + 12;
+	char *name;
+	int i, ret;
+
+	wdata->led_selector = 0;
+
+	for (i = 0; i < 4; i++) {
+		led = kzalloc(sizeof(struct led_classdev) + namesz, GFP_KERNEL);
+		if (!led) {
+			hid_warn(hdev,
+				 "can't allocate memory for LED selector\n");
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		name = (void *)&led[1];
+		snprintf(name, namesz, "%s:selector:%d", dev_name(dev), i);
+		led->name = name;
+		led->brightness = 0;
+		led->max_brightness = 127;
+		led->brightness_get = wacom_leds_get_brightness;
+		led->brightness_set = wacom_leds_set_brightness;
+
+		wdata->leds[i] = led;
+
+		ret = led_classdev_register(dev, wdata->leds[i]);
+
+		if (ret) {
+			wdata->leds[i] = NULL;
+			kfree(led);
+			hid_warn(hdev, "can't register LED\n");
+			goto err;
+		}
+	}
+
+err:
+	return ret;
+}
+
+static void wacom_destroy_leds(struct hid_device *hdev)
+{
+	struct wacom_data *wdata = hid_get_drvdata(hdev);
+	struct led_classdev *led;
+	int i;
+
+	for (i = 0; i < 4; ++i) {
+		if (wdata->leds[i]) {
+			led = wdata->leds[i];
+			wdata->leds[i] = NULL;
+			led_classdev_unregister(led);
+			kfree(led);
+		}
+	}
+
+}
+
 static int wacom_battery_get_property(struct power_supply *psy,
 				enum power_supply_property psp,
 				union power_supply_propval *val)
 {
 	struct wacom_data *wdata = container_of(psy,
 					struct wacom_data, battery);
-	int power_state = batcap[wdata->battery_capacity];
 	int ret = 0;
 
 	switch (psp) {
@@ -81,11 +196,7 @@ static int wacom_battery_get_property(struct power_supply *psy,
 		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
 		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
-		/* show 100% battery capacity when charging */
-		if (power_state == 0)
-			val->intval = 100;
-		else
-			val->intval = power_state;
+		val->intval = wdata->battery_capacity;
 		break;
 	default:
 		ret = -EINVAL;
@@ -99,17 +210,13 @@ static int wacom_ac_get_property(struct power_supply *psy,
 				union power_supply_propval *val)
 {
 	struct wacom_data *wdata = container_of(psy, struct wacom_data, ac);
-	int power_state = batcap[wdata->battery_capacity];
 	int ret = 0;
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_PRESENT:
 		/* fall through */
 	case POWER_SUPPLY_PROP_ONLINE:
-		if (power_state == 0)
-			val->intval = 1;
-		else
-			val->intval = 0;
+		val->intval = wdata->ps_connected;
 		break;
 	case POWER_SUPPLY_PROP_SCOPE:
 		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
@@ -120,41 +227,16 @@ static int wacom_ac_get_property(struct power_supply *psy,
 	}
 	return ret;
 }
-#endif
-
-static void wacom_set_features(struct hid_device *hdev)
-{
-	int ret;
-	__u8 rep_data[2];
-
-	/*set high speed, tablet mode*/
-	rep_data[0] = 0x03;
-	rep_data[1] = 0x20;
-	ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
-				HID_FEATURE_REPORT);
-	return;
-}
 
-static void wacom_poke(struct hid_device *hdev, u8 speed)
+static void wacom_set_features(struct hid_device *hdev, u8 speed)
 {
 	struct wacom_data *wdata = hid_get_drvdata(hdev);
 	int limit, ret;
-	char rep_data[2];
-
-	rep_data[0] = 0x03 ; rep_data[1] = 0x00;
-	limit = 3;
-	do {
-		ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
-				HID_FEATURE_REPORT);
-	} while (ret < 0 && limit-- > 0);
-
-	if (ret >= 0) {
-		if (speed == 0)
-			rep_data[0] = 0x05;
-		else
-			rep_data[0] = 0x06;
+	__u8 rep_data[2];
 
-		rep_data[1] = 0x00;
+	switch (hdev->product) {
+	case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
+		rep_data[0] = 0x03 ; rep_data[1] = 0x00;
 		limit = 3;
 		do {
 			ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
@@ -162,17 +244,47 @@ static void wacom_poke(struct hid_device *hdev, u8 speed)
 		} while (ret < 0 && limit-- > 0);
 
 		if (ret >= 0) {
-			wdata->high_speed = speed;
-			return;
+			if (speed == 0)
+				rep_data[0] = 0x05;
+			else
+				rep_data[0] = 0x06;
+
+			rep_data[1] = 0x00;
+			limit = 3;
+			do {
+				ret = hdev->hid_output_raw_report(hdev,
+					rep_data, 2, HID_FEATURE_REPORT);
+			} while (ret < 0 && limit-- > 0);
+
+			if (ret >= 0) {
+				wdata->high_speed = speed;
+				return;
+			}
 		}
+
+		/*
+		 * Note that if the raw queries fail, it's not a hard failure
+		 * and it is safe to continue
+		 */
+		hid_warn(hdev, "failed to poke device, command %d, err %d\n",
+			 rep_data[0], ret);
+		break;
+	case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
+		if (speed == 1)
+			wdata->features &= ~0x20;
+		else
+			wdata->features |= 0x20;
+
+		rep_data[0] = 0x03;
+		rep_data[1] = wdata->features;
+
+		ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+					HID_FEATURE_REPORT);
+		if (ret >= 0)
+			wdata->high_speed = speed;
+		break;
 	}
 
-	/*
-	 * Note that if the raw queries fail, it's not a hard failure and it
-	 * is safe to continue
-	 */
-	hid_warn(hdev, "failed to poke device, command %d, err %d\n",
-		 rep_data[0], ret);
 	return;
 }
 
@@ -196,7 +308,7 @@ static ssize_t wacom_store_speed(struct device *dev,
 		return -EINVAL;
 
 	if (new_speed == 0 || new_speed == 1) {
-		wacom_poke(hdev, new_speed);
+		wacom_set_features(hdev, new_speed);
 		return strnlen(buf, PAGE_SIZE);
 	} else
 		return -EINVAL;
@@ -310,12 +422,16 @@ static int wacom_gr_parse_report(struct hid_device *hdev,
 		input_sync(input);
 	}
 
-#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
-	/* Store current battery capacity */
+	/* Store current battery capacity and power supply state*/
 	rw = (data[7] >> 2 & 0x07);
-	if (rw != wdata->battery_capacity)
-		wdata->battery_capacity = rw;
-#endif
+	if (rw != wdata->power_raw) {
+		wdata->power_raw = rw;
+		wdata->battery_capacity = batcap_gr[rw];
+		if (rw == 7)
+			wdata->ps_connected = 1;
+		else
+			wdata->ps_connected = 0;
+	}
 	return 1;
 }
 
@@ -369,6 +485,7 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata,
 {
 	__u16 x, y, pressure;
 	__u8 distance;
+	__u8 tilt_x, tilt_y;
 
 	switch (data[1]) {
 	case 0x80: /* Out of proximity report */
@@ -405,6 +522,8 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata,
 		pressure = (data[6] << 3) | ((data[7] & 0xC0) >> 5)
 			| (data[1] & 0x01);
 		distance = (data[9] >> 2) & 0x3f;
+		tilt_x = ((data[7] << 1) & 0x7e) | (data[8] >> 7);
+		tilt_y = data[8] & 0x7f;
 
 		input_report_key(input, BTN_TOUCH, pressure > 1);
 
@@ -415,6 +534,8 @@ static void wacom_i4_parse_pen_report(struct wacom_data *wdata,
 		input_report_abs(input, ABS_Y, y);
 		input_report_abs(input, ABS_PRESSURE, pressure);
 		input_report_abs(input, ABS_DISTANCE, distance);
+		input_report_abs(input, ABS_TILT_X, tilt_x);
+		input_report_abs(input, ABS_TILT_Y, tilt_y);
 		input_report_abs(input, ABS_MISC, wdata->id);
 		input_event(input, EV_MSC, MSC_SERIAL, wdata->serial);
 		input_report_key(input, wdata->tool, 1);
@@ -455,6 +576,7 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
 	struct input_dev *input;
 	unsigned char *data = (unsigned char *) raw_data;
 	int i;
+	__u8 power_raw;
 
 	if (!(hdev->claimed & HID_CLAIMED_INPUT))
 		return 0;
@@ -462,13 +584,15 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
 	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 	input = hidinput->input;
 
-	/* Check if this is a tablet report */
-	if (data[0] != 0x03)
-		return 0;
-
 	switch (hdev->product) {
 	case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
-		return wacom_gr_parse_report(hdev, wdata, input, data);
+		if (data[0] == 0x03) {
+			return wacom_gr_parse_report(hdev, wdata, input, data);
+		} else {
+			hid_err(hdev, "Unknown report: %d,%d size:%d\n",
+					data[0], data[1], size);
+			return 0;
+		}
 		break;
 	case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
 		i = 1;
@@ -482,6 +606,13 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
 			wacom_i4_parse_report(hdev, wdata, input, data + i);
 			i += 10;
 			wacom_i4_parse_report(hdev, wdata, input, data + i);
+			power_raw = data[i+10];
+			if (power_raw != wdata->power_raw) {
+				wdata->power_raw = power_raw;
+				wdata->battery_capacity = batcap_i4[power_raw & 0x07];
+				wdata->ps_connected = power_raw & 0x08;
+			}
+
 			break;
 		default:
 			hid_err(hdev, "Unknown report: %d,%d size:%d\n",
@@ -546,6 +677,8 @@ static int wacom_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 		input_set_abs_params(input, ABS_Y, 0, 25400, 4, 0);
 		input_set_abs_params(input, ABS_PRESSURE, 0, 2047, 0, 0);
 		input_set_abs_params(input, ABS_DISTANCE, 0, 63, 0, 0);
+		input_set_abs_params(input, ABS_TILT_X, 0, 127, 0, 0);
+		input_set_abs_params(input, ABS_TILT_Y, 0, 127, 0, 0);
 		break;
 	}
 
@@ -584,19 +717,19 @@ static int wacom_probe(struct hid_device *hdev,
 		hid_warn(hdev,
 			 "can't create sysfs speed attribute err: %d\n", ret);
 
-	switch (hdev->product) {
-	case USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH:
-		/* Set Wacom mode 2 with high reporting speed */
-		wacom_poke(hdev, 1);
-		break;
-	case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
+	wdata->features = 0;
+	wacom_set_features(hdev, 1);
+
+	if (hdev->product == USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) {
 		sprintf(hdev->name, "%s", "Wacom Intuos4 WL");
-		wdata->features = 0;
-		wacom_set_features(hdev);
-		break;
+		ret = wacom_initialize_leds(hdev);
+		if (ret) {
+			hid_warn(hdev,
+				 "can't create led attribute, err: %d\n", ret);
+			goto destroy_leds;
+		}
 	}
 
-#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 	wdata->battery.properties = wacom_battery_props;
 	wdata->battery.num_properties = ARRAY_SIZE(wacom_battery_props);
 	wdata->battery.get_property = wacom_battery_get_property;
@@ -629,16 +762,15 @@ static int wacom_probe(struct hid_device *hdev,
 	}
 
 	power_supply_powers(&wdata->ac, &hdev->dev);
-#endif
 	return 0;
 
-#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 err_ac:
 	power_supply_unregister(&wdata->battery);
 err_battery:
 	device_remove_file(&hdev->dev, &dev_attr_speed);
 	hid_hw_stop(hdev);
-#endif
+destroy_leds:
+	wacom_destroy_leds(hdev);
 err_free:
 	kfree(wdata);
 	return ret;
@@ -646,16 +778,14 @@ err_free:
 
 static void wacom_remove(struct hid_device *hdev)
 {
-#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 	struct wacom_data *wdata = hid_get_drvdata(hdev);
-#endif
+
+	wacom_destroy_leds(hdev);
 	device_remove_file(&hdev->dev, &dev_attr_speed);
 	hid_hw_stop(hdev);
 
-#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 	power_supply_unregister(&wdata->battery);
 	power_supply_unregister(&wdata->ac);
-#endif
 	kfree(hid_get_drvdata(hdev));
 }
 
@@ -693,5 +823,5 @@ static void __exit wacom_exit(void)
 
 module_init(wacom_init);
 module_exit(wacom_exit);
+MODULE_DESCRIPTION("Driver for Wacom Graphire Bluetooth and Wacom Intuos4 WL");
 MODULE_LICENSE("GPL");
-
diff --git a/drivers/hid/hid-waltop.c b/drivers/hid/hid-waltop.c
index 2cfd95c4467b..745e4e9a8cf2 100644
--- a/drivers/hid/hid-waltop.c
+++ b/drivers/hid/hid-waltop.c
@@ -502,28 +502,146 @@ static __u8 media_tablet_14_1_inch_rdesc_fixed[] = {
 	0xC0                /*  End Collection                      */
 };
 
-struct waltop_state {
-	u8 pressure0;
-	u8 pressure1;
+/*
+ * See Sirius Battery Free Tablet description, device and HID report descriptors
+ * at
+ * http://sf.net/apps/mediawiki/digimend/?title=Waltop_Sirius_Battery_Free_Tablet
+ */
+
+/* Size of the original report descriptor of Sirius Battery Free Tablet */
+#define SIRIUS_BATTERY_FREE_TABLET_RDESC_ORIG_SIZE	335
+
+/* Fixed Sirius Battery Free Tablet descriptor */
+static __u8 sirius_battery_free_tablet_rdesc_fixed[] = {
+	0x05, 0x0D,         /*  Usage Page (Digitizer),             */
+	0x09, 0x02,         /*  Usage (Pen),                        */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x10,         /*      Report ID (16),                 */
+	0x09, 0x20,         /*      Usage (Stylus),                 */
+	0xA0,               /*      Collection (Physical),          */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x15, 0x01,         /*          Logical Minimum (1),        */
+	0x25, 0x03,         /*          Logical Maximum (3),        */
+	0x75, 0x02,         /*          Report Size (2),            */
+	0x09, 0x42,         /*          Usage (Tip Switch),         */
+	0x09, 0x44,         /*          Usage (Barrel Switch),      */
+	0x09, 0x46,         /*          Usage (Tablet Pick),        */
+	0x80,               /*          Input,                      */
+	0x14,               /*          Logical Minimum (0),        */
+	0x25, 0x01,         /*          Logical Maximum (1),        */
+	0x75, 0x01,         /*          Report Size (1),            */
+	0x09, 0x3C,         /*          Usage (Invert),             */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0x09, 0x32,         /*          Usage (In Range),           */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x95, 0x03,         /*          Report Count (3),           */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0xA4,               /*          Push,                       */
+	0x05, 0x01,         /*          Usage Page (Desktop),       */
+	0x55, 0xFD,         /*          Unit Exponent (-3),         */
+	0x65, 0x13,         /*          Unit (Inch),                */
+	0x34,               /*          Physical Minimum (0),       */
+	0x14,               /*          Logical Minimum (0),        */
+	0x75, 0x10,         /*          Report Size (16),           */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x46, 0x10, 0x27,   /*          Physical Maximum (10000),   */
+	0x26, 0x20, 0x4E,   /*          Logical Maximum (20000),    */
+	0x09, 0x30,         /*          Usage (X),                  */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0x46, 0x70, 0x17,   /*          Physical Maximum (6000),    */
+	0x26, 0xE0, 0x2E,   /*          Logical Maximum (12000),    */
+	0x09, 0x31,         /*          Usage (Y),                  */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0xB4,               /*          Pop,                        */
+	0x75, 0x10,         /*          Report Size (16),           */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x14,               /*          Logical Minimum (0),        */
+	0x26, 0xFF, 0x03,   /*          Logical Maximum (1023),     */
+	0x09, 0x30,         /*          Usage (Tip Pressure),       */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0xA4,               /*          Push,                       */
+	0x55, 0xFE,         /*          Unit Exponent (-2),         */
+	0x65, 0x12,         /*          Unit (Radians),             */
+	0x35, 0x97,         /*          Physical Minimum (-105),    */
+	0x45, 0x69,         /*          Physical Maximum (105),     */
+	0x15, 0x97,         /*          Logical Minimum (-105),     */
+	0x25, 0x69,         /*          Logical Maximum (105),      */
+	0x75, 0x08,         /*          Report Size (8),            */
+	0x95, 0x02,         /*          Report Count (2),           */
+	0x09, 0x3D,         /*          Usage (X Tilt),             */
+	0x09, 0x3E,         /*          Usage (Y Tilt),             */
+	0x81, 0x02,         /*          Input (Variable),           */
+	0xB4,               /*          Pop,                        */
+	0xC0,               /*      End Collection,                 */
+	0xC0,               /*  End Collection,                     */
+	0x05, 0x01,         /*  Usage Page (Desktop),               */
+	0x09, 0x02,         /*  Usage (Mouse),                      */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x01,         /*      Report ID (1),                  */
+	0x09, 0x01,         /*      Usage (Pointer),                */
+	0xA0,               /*      Collection (Physical),          */
+	0x75, 0x08,         /*          Report Size (8),            */
+	0x95, 0x03,         /*          Report Count (3),           */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0x09, 0x38,         /*          Usage (Wheel),              */
+	0x15, 0xFF,         /*          Logical Minimum (-1),       */
+	0x25, 0x01,         /*          Logical Maximum (1),        */
+	0x75, 0x08,         /*          Report Size (8),            */
+	0x95, 0x01,         /*          Report Count (1),           */
+	0x81, 0x06,         /*          Input (Variable, Relative), */
+	0x75, 0x08,         /*          Report Size (8),            */
+	0x95, 0x03,         /*          Report Count (3),           */
+	0x81, 0x03,         /*          Input (Constant, Variable), */
+	0xC0,               /*      End Collection,                 */
+	0xC0,               /*  End Collection,                     */
+	0x05, 0x01,         /*  Usage Page (Desktop),               */
+	0x09, 0x06,         /*  Usage (Keyboard),                   */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x0D,         /*      Report ID (13),                 */
+	0x05, 0x07,         /*      Usage Page (Keyboard),          */
+	0x19, 0xE0,         /*      Usage Minimum (KB Leftcontrol), */
+	0x29, 0xE7,         /*      Usage Maximum (KB Right GUI),   */
+	0x14,               /*      Logical Minimum (0),            */
+	0x25, 0x01,         /*      Logical Maximum (1),            */
+	0x75, 0x01,         /*      Report Size (1),                */
+	0x95, 0x08,         /*      Report Count (8),               */
+	0x81, 0x02,         /*      Input (Variable),               */
+	0x75, 0x08,         /*      Report Size (8),                */
+	0x95, 0x01,         /*      Report Count (1),               */
+	0x81, 0x01,         /*      Input (Constant),               */
+	0x18,               /*      Usage Minimum (None),           */
+	0x29, 0x65,         /*      Usage Maximum (KB Application), */
+	0x14,               /*      Logical Minimum (0),            */
+	0x25, 0x65,         /*      Logical Maximum (101),          */
+	0x75, 0x08,         /*      Report Size (8),                */
+	0x95, 0x05,         /*      Report Count (5),               */
+	0x80,               /*      Input,                          */
+	0xC0,               /*  End Collection,                     */
+	0x05, 0x0C,         /*  Usage Page (Consumer),              */
+	0x09, 0x01,         /*  Usage (Consumer Control),           */
+	0xA1, 0x01,         /*  Collection (Application),           */
+	0x85, 0x0C,         /*      Report ID (12),                 */
+	0x09, 0xE9,         /*      Usage (Volume Inc),             */
+	0x09, 0xEA,         /*      Usage (Volume Dec),             */
+	0x14,               /*      Logical Minimum (0),            */
+	0x25, 0x01,         /*      Logical Maximum (1),            */
+	0x75, 0x01,         /*      Report Size (1),                */
+	0x95, 0x02,         /*      Report Count (2),               */
+	0x81, 0x02,         /*      Input (Variable),               */
+	0x75, 0x06,         /*      Report Size (6),                */
+	0x95, 0x01,         /*      Report Count (1),               */
+	0x81, 0x03,         /*      Input (Constant, Variable),     */
+	0x75, 0x10,         /*      Report Size (16),               */
+	0x95, 0x03,         /*      Report Count (3),               */
+	0x81, 0x03,         /*      Input (Constant, Variable),     */
+	0xC0                /*  End Collection                      */
 };
 
 static int waltop_probe(struct hid_device *hdev,
 			const struct hid_device_id *id)
 {
 	int ret;
-	struct waltop_state *s;
-
-	s = kzalloc(sizeof(*s), GFP_KERNEL);
-	if (s == NULL) {
-		hid_err(hdev, "can't allocate device state\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	s->pressure0 = 0;
-	s->pressure1 = 0;
-
-	hid_set_drvdata(hdev, s);
 
 	ret = hid_parse(hdev);
 	if (ret) {
@@ -539,7 +657,6 @@ static int waltop_probe(struct hid_device *hdev,
 
 	return 0;
 err:
-	kfree(s);
 	return ret;
 }
 
@@ -583,6 +700,12 @@ static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 			*rsize = sizeof(media_tablet_14_1_inch_rdesc_fixed);
 		}
 		break;
+	case USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET:
+		if (*rsize == SIRIUS_BATTERY_FREE_TABLET_RDESC_ORIG_SIZE) {
+			rdesc = sirius_battery_free_tablet_rdesc_fixed;
+			*rsize = sizeof(sirius_battery_free_tablet_rdesc_fixed);
+		}
+		break;
 	}
 	return rdesc;
 }
@@ -590,39 +713,72 @@ static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 static int waltop_raw_event(struct hid_device *hdev, struct hid_report *report,
 		     u8 *data, int size)
 {
-	/* If this is a pen input report of a tablet with PID 0038 */
-	if (hdev->product == USB_DEVICE_ID_WALTOP_PID_0038 &&
-	    report->type == HID_INPUT_REPORT &&
-	    report->id == 16 &&
-	    size == 8) {
-		struct waltop_state *s = hid_get_drvdata(hdev);
-
+	/* If this is a pen input report */
+	if (report->type == HID_INPUT_REPORT && report->id == 16 && size >= 8) {
 		/*
-		 * Ignore maximum pressure reported when a barrel button is
-		 * pressed.
+		 * Ignore reported pressure when a barrel button is pressed,
+		 * because it is rarely correct.
 		 */
 
 		/* If a barrel button is pressed */
 		if ((data[1] & 0xF) > 1) {
-			/* Use the last known pressure */
-			data[6] = s->pressure0;
-			data[7] = s->pressure1;
-		} else {
-			/* Remember reported pressure */
-			s->pressure0 = data[6];
-			s->pressure1 = data[7];
+			/* Report zero pressure */
+			data[6] = 0;
+			data[7] = 0;
 		}
 	}
 
+	/* If this is a pen input report of Sirius Battery Free Tablet */
+	if (hdev->product == USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET &&
+	    report->type == HID_INPUT_REPORT &&
+	    report->id == 16 &&
+	    size == 10) {
+		/*
+		 * The tablet reports tilt as roughly sin(a)*21 (18 means 60
+		 * degrees).
+		 *
+		 * This array stores angles as radians * 100, corresponding to
+		 * reported values up to 60 degrees, as expected by userspace.
+		 */
+		static const s8 tilt_to_radians[] = {
+			0, 5, 10, 14, 19, 24, 29, 34, 40, 45,
+			50, 56, 62, 68, 74, 81, 88, 96, 105
+		};
+
+		s8 tilt_x = (s8)data[8];
+		s8 tilt_y = (s8)data[9];
+		s8 sign_x = tilt_x >= 0 ? 1 : -1;
+		s8 sign_y = tilt_y >= 0 ? 1 : -1;
+
+		tilt_x *= sign_x;
+		tilt_y *= sign_y;
+
+		/*
+		 * Reverse the Y Tilt direction to match the HID standard and
+		 * userspace expectations. See HID Usage Tables v1.12 16.3.2
+		 * Tilt Orientation.
+		 */
+		sign_y *= -1;
+
+		/*
+		 * This effectively clamps reported tilt to 60 degrees - the
+		 * range expected by userspace
+		 */
+		if (tilt_x > ARRAY_SIZE(tilt_to_radians) - 1)
+			tilt_x = ARRAY_SIZE(tilt_to_radians) - 1;
+		if (tilt_y > ARRAY_SIZE(tilt_to_radians) - 1)
+			tilt_y = ARRAY_SIZE(tilt_to_radians) - 1;
+
+		data[8] = tilt_to_radians[tilt_x] * sign_x;
+		data[9] = tilt_to_radians[tilt_y] * sign_y;
+	}
+
 	return 0;
 }
 
 static void waltop_remove(struct hid_device *hdev)
 {
-	struct waltop_state *s = hid_get_drvdata(hdev);
-
 	hid_hw_stop(hdev);
-	kfree(s);
 }
 
 static const struct hid_device_id waltop_devices[] = {
@@ -638,6 +794,8 @@ static const struct hid_device_id waltop_devices[] = {
 				USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
 				USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
+			 USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, waltop_devices);
diff --git a/drivers/hid/hid-wiimote-core.c b/drivers/hid/hid-wiimote-core.c
index cac3589b1ed5..84e2fbec5fbb 100644
--- a/drivers/hid/hid-wiimote-core.c
+++ b/drivers/hid/hid-wiimote-core.c
@@ -769,7 +769,7 @@ static void __ir_to_input(struct wiimote_data *wdata, const __u8 *ir,
 
 	/*
 	 * Basic IR data is encoded into 3 bytes. The first two bytes are the
-	 * upper 8 bit of the X/Y data, the 3rd byte contains the lower 2 bits
+	 * lower 8 bit of the X/Y data, the 3rd byte contains the upper 2 bits
 	 * of both.
 	 * If data is packed, then the 3rd byte is put first and slightly
 	 * reordered. This allows to interleave packed and non-packed data to
@@ -778,17 +778,11 @@ static void __ir_to_input(struct wiimote_data *wdata, const __u8 *ir,
 	 */
 
 	if (packed) {
-		x = ir[1] << 2;
-		y = ir[2] << 2;
-
-		x |= ir[0] & 0x3;
-		y |= (ir[0] >> 2) & 0x3;
+		x = ir[1] | ((ir[0] & 0x03) << 8);
+		y = ir[2] | ((ir[0] & 0x0c) << 6);
 	} else {
-		x = ir[0] << 2;
-		y = ir[1] << 2;
-
-		x |= (ir[2] >> 4) & 0x3;
-		y |= (ir[2] >> 6) & 0x3;
+		x = ir[0] | ((ir[2] & 0x30) << 4);
+		y = ir[1] | ((ir[2] & 0xc0) << 2);
 	}
 
 	input_report_abs(wdata->ir, xid, x);
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index cf7d6d58e79f..36fa77b40ffb 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -87,11 +87,13 @@ static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count,
 		len = list->buffer[list->tail].len > count ?
 			count : list->buffer[list->tail].len;
 
-		if (copy_to_user(buffer, list->buffer[list->tail].value, len)) {
-			ret = -EFAULT;
-			goto out;
+		if (list->buffer[list->tail].value) {
+			if (copy_to_user(buffer, list->buffer[list->tail].value, len)) {
+				ret = -EFAULT;
+				goto out;
+			}
+			ret = len;
 		}
-		ret = len;
 
 		kfree(list->buffer[list->tail].value);
 		list->tail = (list->tail + 1) & (HIDRAW_BUFFER_SIZE - 1);
@@ -437,19 +439,24 @@ static const struct file_operations hidraw_ops = {
 	.llseek =	noop_llseek,
 };
 
-void hidraw_report_event(struct hid_device *hid, u8 *data, int len)
+int hidraw_report_event(struct hid_device *hid, u8 *data, int len)
 {
 	struct hidraw *dev = hid->hidraw;
 	struct hidraw_list *list;
+	int ret = 0;
 
 	list_for_each_entry(list, &dev->list, node) {
-		list->buffer[list->head].value = kmemdup(data, len, GFP_ATOMIC);
+		if (!(list->buffer[list->head].value = kmemdup(data, len, GFP_ATOMIC))) {
+			ret = -ENOMEM;
+			break;
+		}
 		list->buffer[list->head].len = len;
 		list->head = (list->head + 1) & (HIDRAW_BUFFER_SIZE - 1);
 		kill_fasync(&list->fasync, SIGIO, POLL_IN);
 	}
 
 	wake_up_interruptible(&dev->wait);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(hidraw_report_event);
 
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 5bf91dbad59d..482f936fc29b 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -28,6 +28,7 @@
 #include <linux/input.h>
 #include <linux/wait.h>
 #include <linux/workqueue.h>
+#include <linux/string.h>
 
 #include <linux/usb.h>
 
@@ -86,8 +87,13 @@ static int hid_start_in(struct hid_device *hid)
 			!test_bit(HID_REPORTED_IDLE, &usbhid->iofl) &&
 			!test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) {
 		rc = usb_submit_urb(usbhid->urbin, GFP_ATOMIC);
-		if (rc != 0)
+		if (rc != 0) {
 			clear_bit(HID_IN_RUNNING, &usbhid->iofl);
+			if (rc == -ENOSPC)
+				set_bit(HID_NO_BANDWIDTH, &usbhid->iofl);
+		} else {
+			clear_bit(HID_NO_BANDWIDTH, &usbhid->iofl);
+		}
 	}
 	spin_unlock_irqrestore(&usbhid->lock, flags);
 	return rc;
@@ -173,8 +179,10 @@ static void hid_io_error(struct hid_device *hid)
 
 	if (time_after(jiffies, usbhid->stop_retry)) {
 
-		/* Retries failed, so do a port reset */
-		if (!test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) {
+		/* Retries failed, so do a port reset unless we lack bandwidth*/
+		if (test_bit(HID_NO_BANDWIDTH, &usbhid->iofl)
+		     && !test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) {
+
 			schedule_work(&usbhid->reset_work);
 			goto done;
 		}
@@ -203,7 +211,7 @@ static int usbhid_restart_out_queue(struct usbhid_device *usbhid)
 		return 0;
 
 	if ((kicked = (usbhid->outhead != usbhid->outtail))) {
-		dbg("Kicking head %d tail %d", usbhid->outhead, usbhid->outtail);
+		hid_dbg(hid, "Kicking head %d tail %d", usbhid->outhead, usbhid->outtail);
 
 		r = usb_autopm_get_interface_async(usbhid->intf);
 		if (r < 0)
@@ -230,7 +238,7 @@ static int usbhid_restart_ctrl_queue(struct usbhid_device *usbhid)
 		return 0;
 
 	if ((kicked = (usbhid->ctrlhead != usbhid->ctrltail))) {
-		dbg("Kicking head %d tail %d", usbhid->ctrlhead, usbhid->ctrltail);
+		hid_dbg(hid, "Kicking head %d tail %d", usbhid->ctrlhead, usbhid->ctrltail);
 
 		r = usb_autopm_get_interface_async(usbhid->intf);
 		if (r < 0)
@@ -399,6 +407,16 @@ static int hid_submit_ctrl(struct hid_device *hid)
  * Output interrupt completion handler.
  */
 
+static int irq_out_pump_restart(struct hid_device *hid)
+{
+	struct usbhid_device *usbhid = hid->driver_data;
+
+	if (usbhid->outhead != usbhid->outtail)
+		return hid_submit_out(hid);
+	else
+		return -1;
+}
+
 static void hid_irq_out(struct urb *urb)
 {
 	struct hid_device *hid = urb->context;
@@ -428,7 +446,7 @@ static void hid_irq_out(struct urb *urb)
 	else
 		usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1);
 
-	if (usbhid->outhead != usbhid->outtail && !hid_submit_out(hid)) {
+	if (!irq_out_pump_restart(hid)) {
 		/* Successfully submitted next urb in queue */
 		spin_unlock_irqrestore(&usbhid->lock, flags);
 		return;
@@ -443,6 +461,15 @@ static void hid_irq_out(struct urb *urb)
 /*
  * Control pipe completion handler.
  */
+static int ctrl_pump_restart(struct hid_device *hid)
+{
+	struct usbhid_device *usbhid = hid->driver_data;
+
+	if (usbhid->ctrlhead != usbhid->ctrltail)
+		return hid_submit_ctrl(hid);
+	else
+		return -1;
+}
 
 static void hid_ctrl(struct urb *urb)
 {
@@ -476,7 +503,7 @@ static void hid_ctrl(struct urb *urb)
 	else
 		usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1);
 
-	if (usbhid->ctrlhead != usbhid->ctrltail && !hid_submit_ctrl(hid)) {
+	if (!ctrl_pump_restart(hid)) {
 		/* Successfully submitted next urb in queue */
 		spin_unlock(&usbhid->lock);
 		return;
@@ -535,11 +562,27 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
 			 * the queue is known to run
 			 * but an earlier request may be stuck
 			 * we may need to time out
-			 * no race because this is called under
+			 * no race because the URB is blocked under
 			 * spinlock
 			 */
-			if (time_after(jiffies, usbhid->last_out + HZ * 5))
+			if (time_after(jiffies, usbhid->last_out + HZ * 5)) {
+				usb_block_urb(usbhid->urbout);
+				/* drop lock to not deadlock if the callback is called */
+				spin_unlock(&usbhid->lock);
 				usb_unlink_urb(usbhid->urbout);
+				spin_lock(&usbhid->lock);
+				usb_unblock_urb(usbhid->urbout);
+				/*
+				 * if the unlinking has already completed
+				 * the pump will have been stopped
+				 * it must be restarted now
+				 */
+				if (!test_bit(HID_OUT_RUNNING, &usbhid->iofl))
+					if (!irq_out_pump_restart(hid))
+						set_bit(HID_OUT_RUNNING, &usbhid->iofl);
+
+
+			}
 		}
 		return;
 	}
@@ -583,11 +626,25 @@ static void __usbhid_submit_report(struct hid_device *hid, struct hid_report *re
 		 * the queue is known to run
 		 * but an earlier request may be stuck
 		 * we may need to time out
-		 * no race because this is called under
+		 * no race because the URB is blocked under
 		 * spinlock
 		 */
-		if (time_after(jiffies, usbhid->last_ctrl + HZ * 5))
+		if (time_after(jiffies, usbhid->last_ctrl + HZ * 5)) {
+			usb_block_urb(usbhid->urbctrl);
+			/* drop lock to not deadlock if the callback is called */
+			spin_unlock(&usbhid->lock);
 			usb_unlink_urb(usbhid->urbctrl);
+			spin_lock(&usbhid->lock);
+			usb_unblock_urb(usbhid->urbctrl);
+			/*
+			 * if the unlinking has already completed
+			 * the pump will have been stopped
+			 * it must be restarted now
+			 */
+			if (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl))
+				if (!ctrl_pump_restart(hid))
+					set_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+		}
 	}
 }
 
@@ -700,7 +757,7 @@ static int hid_get_class_descriptor(struct usb_device *dev, int ifnum,
 int usbhid_open(struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
-	int res;
+	int res = 0;
 
 	mutex_lock(&hid_open_mut);
 	if (!hid->open++) {
@@ -708,17 +765,27 @@ int usbhid_open(struct hid_device *hid)
 		/* the device must be awake to reliably request remote wakeup */
 		if (res < 0) {
 			hid->open--;
-			mutex_unlock(&hid_open_mut);
-			return -EIO;
+			res = -EIO;
+			goto done;
 		}
 		usbhid->intf->needs_remote_wakeup = 1;
-		if (hid_start_in(hid))
-			hid_io_error(hid);
- 
+		res = hid_start_in(hid);
+		if (res) {
+			if (res != -ENOSPC) {
+				hid_io_error(hid);
+				res = 0;
+			} else {
+				/* no use opening if resources are insufficient */
+				hid->open--;
+				res = -EBUSY;
+				usbhid->intf->needs_remote_wakeup = 0;
+			}
+		}
 		usb_autopm_put_interface(usbhid->intf);
 	}
+done:
 	mutex_unlock(&hid_open_mut);
-	return 0;
+	return res;
 }
 
 void usbhid_close(struct hid_device *hid)
@@ -1347,7 +1414,34 @@ static int hid_post_reset(struct usb_interface *intf)
 	struct usb_device *dev = interface_to_usbdev (intf);
 	struct hid_device *hid = usb_get_intfdata(intf);
 	struct usbhid_device *usbhid = hid->driver_data;
+	struct usb_host_interface *interface = intf->cur_altsetting;
 	int status;
+	char *rdesc;
+
+	/* Fetch and examine the HID report descriptor. If this
+	 * has changed, then rebind. Since usbcore's check of the
+	 * configuration descriptors passed, we already know that
+	 * the size of the HID report descriptor has not changed.
+	 */
+	rdesc = kmalloc(hid->rsize, GFP_KERNEL);
+	if (!rdesc) {
+		dbg_hid("couldn't allocate rdesc memory (post_reset)\n");
+		return 1;
+	}
+	status = hid_get_class_descriptor(dev,
+				interface->desc.bInterfaceNumber,
+				HID_DT_REPORT, rdesc, hid->rsize);
+	if (status < 0) {
+		dbg_hid("reading report descriptor failed (post_reset)\n");
+		kfree(rdesc);
+		return 1;
+	}
+	status = memcmp(rdesc, hid->rdesc, hid->rsize);
+	kfree(rdesc);
+	if (status != 0) {
+		dbg_hid("report descriptor changed\n");
+		return 1;
+	}
 
 	spin_lock_irq(&usbhid->lock);
 	clear_bit(HID_RESET_PENDING, &usbhid->iofl);
@@ -1504,28 +1598,15 @@ static struct usb_driver hid_driver = {
 	.supports_autosuspend = 1,
 };
 
-static const struct hid_device_id hid_usb_table[] = {
-	{ HID_USB_DEVICE(HID_ANY_ID, HID_ANY_ID) },
-	{ }
-};
-
 struct usb_interface *usbhid_find_interface(int minor)
 {
 	return usb_find_interface(&hid_driver, minor);
 }
 
-static struct hid_driver hid_usb_driver = {
-	.name = "generic-usb",
-	.id_table = hid_usb_table,
-};
-
 static int __init hid_init(void)
 {
 	int retval = -ENOMEM;
 
-	retval = hid_register_driver(&hid_usb_driver);
-	if (retval)
-		goto hid_register_fail;
 	retval = usbhid_quirks_init(quirks_param);
 	if (retval)
 		goto usbhid_quirks_init_fail;
@@ -1538,8 +1619,6 @@ static int __init hid_init(void)
 usb_register_fail:
 	usbhid_quirks_exit();
 usbhid_quirks_init_fail:
-	hid_unregister_driver(&hid_usb_driver);
-hid_register_fail:
 	return retval;
 }
 
@@ -1547,7 +1626,6 @@ static void __exit hid_exit(void)
 {
 	usb_deregister(&hid_driver);
 	usbhid_quirks_exit();
-	hid_unregister_driver(&hid_usb_driver);
 }
 
 module_init(hid_init);
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 782c63955f29..0597ee604f6e 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -88,6 +88,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_QUAD_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 
 	{ USB_VENDOR_ID_WISEGROUP_LTD2, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index b1ec0e2aeb57..14599e256791 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -34,6 +34,7 @@
 #include <linux/hid.h>
 #include <linux/hiddev.h>
 #include <linux/compat.h>
+#include <linux/vmalloc.h>
 #include "usbhid.h"
 
 #ifdef CONFIG_USB_DYNAMIC_MINORS
@@ -250,13 +251,13 @@ static int hiddev_release(struct inode * inode, struct file * file)
 		} else {
 			mutex_unlock(&list->hiddev->existancelock);
 			kfree(list->hiddev);
-			kfree(list);
+			vfree(list);
 			return 0;
 		}
 	}
 
 	mutex_unlock(&list->hiddev->existancelock);
-	kfree(list);
+	vfree(list);
 
 	return 0;
 }
@@ -278,7 +279,7 @@ static int hiddev_open(struct inode *inode, struct file *file)
 	hid = usb_get_intfdata(intf);
 	hiddev = hid->hiddev;
 
-	if (!(list = kzalloc(sizeof(struct hiddev_list), GFP_KERNEL)))
+	if (!(list = vzalloc(sizeof(struct hiddev_list))))
 		return -ENOMEM;
 	mutex_init(&list->thread_lock);
 	list->hiddev = hiddev;
@@ -322,7 +323,7 @@ bail_unlock:
 	mutex_unlock(&hiddev->existancelock);
 bail:
 	file->private_data = NULL;
-	kfree(list);
+	vfree(list);
 	return res;
 }
 
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index cb8f703efde5..1883d7b94870 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -55,6 +55,7 @@ struct usb_interface *usbhid_find_interface(int minor);
 #define HID_STARTED		8
 #define HID_REPORTED_IDLE	9
 #define HID_KEYS_PRESSED	10
+#define HID_NO_BANDWIDTH	11
 
 /*
  * USB-specific HID struct, to be pointed to
diff --git a/drivers/hid/usbhid/usbmouse.c b/drivers/hid/usbhid/usbmouse.c
index 0f6be45d43d5..bf16d72dc370 100644
--- a/drivers/hid/usbhid/usbmouse.c
+++ b/drivers/hid/usbhid/usbmouse.c
@@ -92,9 +92,10 @@ static void usb_mouse_irq(struct urb *urb)
 resubmit:
 	status = usb_submit_urb (urb, GFP_ATOMIC);
 	if (status)
-		err ("can't resubmit intr, %s-%s/input0, status %d",
-				mouse->usbdev->bus->bus_name,
-				mouse->usbdev->devpath, status);
+		dev_err(&mouse->usbdev->dev,
+			"can't resubmit intr, %s-%s/input0, status %d\n",
+			mouse->usbdev->bus->bus_name,
+			mouse->usbdev->devpath, status);
 }
 
 static int usb_mouse_open(struct input_dev *dev)
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 9ffbfc575a0c..2b8b8d4558d2 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -46,40 +46,61 @@ struct vmbus_channel_message_table_entry {
  *
  * @icmsghdrp is of type &struct icmsg_hdr.
  * @negop is of type &struct icmsg_negotiate.
- * Set up and fill in default negotiate response message. This response can
- * come from both the vmbus driver and the hv_utils driver. The current api
- * will respond properly to both Windows 2008 and Windows 2008-R2 operating
- * systems.
+ * Set up and fill in default negotiate response message.
+ *
+ * The max_fw_version specifies the maximum framework version that
+ * we can support and max _srv_version specifies the maximum service
+ * version we can support. A special value MAX_SRV_VER can be
+ * specified to indicate that we can handle the maximum version
+ * exposed by the host.
  *
  * Mainly used by Hyper-V drivers.
  */
 void vmbus_prep_negotiate_resp(struct icmsg_hdr *icmsghdrp,
-			       struct icmsg_negotiate *negop, u8 *buf)
+				struct icmsg_negotiate *negop, u8 *buf,
+				int max_fw_version, int max_srv_version)
 {
-	if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-		icmsghdrp->icmsgsize = 0x10;
-
-		negop = (struct icmsg_negotiate *)&buf[
-			sizeof(struct vmbuspipe_hdr) +
-			sizeof(struct icmsg_hdr)];
-
-		if (negop->icframe_vercnt == 2 &&
-		   negop->icversion_data[1].major == 3) {
-			negop->icversion_data[0].major = 3;
-			negop->icversion_data[0].minor = 0;
-			negop->icversion_data[1].major = 3;
-			negop->icversion_data[1].minor = 0;
-		} else {
-			negop->icversion_data[0].major = 1;
-			negop->icversion_data[0].minor = 0;
-			negop->icversion_data[1].major = 1;
-			negop->icversion_data[1].minor = 0;
-		}
+	int icframe_vercnt;
+	int icmsg_vercnt;
+	int i;
+
+	icmsghdrp->icmsgsize = 0x10;
+
+	negop = (struct icmsg_negotiate *)&buf[
+		sizeof(struct vmbuspipe_hdr) +
+		sizeof(struct icmsg_hdr)];
+
+	icframe_vercnt = negop->icframe_vercnt;
+	icmsg_vercnt = negop->icmsg_vercnt;
+
+	/*
+	 * Select the framework version number we will
+	 * support.
+	 */
+
+	for (i = 0; i < negop->icframe_vercnt; i++) {
+		if (negop->icversion_data[i].major <= max_fw_version)
+			icframe_vercnt = negop->icversion_data[i].major;
+	}
 
-		negop->icframe_vercnt = 1;
-		negop->icmsg_vercnt = 1;
+	for (i = negop->icframe_vercnt;
+		 (i < negop->icframe_vercnt + negop->icmsg_vercnt); i++) {
+		if (negop->icversion_data[i].major <= max_srv_version)
+			icmsg_vercnt = negop->icversion_data[i].major;
 	}
+
+	/*
+	 * Respond with the maximum framework and service
+	 * version numbers we can support.
+	 */
+	negop->icframe_vercnt = 1;
+	negop->icmsg_vercnt = 1;
+	negop->icversion_data[0].major = icframe_vercnt;
+	negop->icversion_data[0].minor = 0;
+	negop->icversion_data[1].major = icmsg_vercnt;
+	negop->icversion_data[1].minor = 0;
 }
+
 EXPORT_SYMBOL_GPL(vmbus_prep_negotiate_resp);
 
 /*
diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index 15956bd48b48..86f8885aeb45 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -252,7 +252,7 @@ void hv_cleanup(void)
  *
  * This involves a hypercall.
  */
-u16 hv_post_message(union hv_connection_id connection_id,
+int hv_post_message(union hv_connection_id connection_id,
 		  enum hv_message_type message_type,
 		  void *payload, size_t payload_size)
 {
diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
index 6186025209ce..0012eed6d872 100644
--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@@ -394,7 +394,8 @@ void hv_kvp_onchannelcallback(void *context)
 			sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, negop, recv_buffer);
+			vmbus_prep_negotiate_resp(icmsghdrp, negop,
+				 recv_buffer, MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			kvp_msg = (struct hv_kvp_msg *)&recv_buffer[
 				sizeof(struct vmbuspipe_hdr) +
diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c
index dbb8b8eec210..d3ac6a40118b 100644
--- a/drivers/hv/hv_util.c
+++ b/drivers/hv/hv_util.c
@@ -70,7 +70,8 @@ static void shutdown_onchannelcallback(void *context)
 			sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, negop, shut_txf_buf);
+			vmbus_prep_negotiate_resp(icmsghdrp, negop,
+					shut_txf_buf, MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			shutdown_msg =
 				(struct shutdown_msg_data *)&shut_txf_buf[
@@ -195,7 +196,8 @@ static void timesync_onchannelcallback(void *context)
 				sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, NULL, time_txf_buf);
+			vmbus_prep_negotiate_resp(icmsghdrp, NULL, time_txf_buf,
+						MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			timedatap = (struct ictimesync_data *)&time_txf_buf[
 				sizeof(struct vmbuspipe_hdr) +
@@ -234,7 +236,8 @@ static void heartbeat_onchannelcallback(void *context)
 				sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, NULL, hbeat_txf_buf);
+			vmbus_prep_negotiate_resp(icmsghdrp, NULL,
+				hbeat_txf_buf, MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			heartbeat_msg =
 				(struct heartbeat_msg_data *)&hbeat_txf_buf[
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 699f0d8e59ed..b9426a6592ee 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -495,7 +495,7 @@ extern int hv_init(void);
 
 extern void hv_cleanup(void);
 
-extern u16 hv_post_message(union hv_connection_id connection_id,
+extern int hv_post_message(union hv_connection_id connection_id,
 			 enum hv_message_type message_type,
 			 void *payload, size_t payload_size);
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 8deedc1b9840..e466ecba8dc1 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -318,7 +318,7 @@ config SENSORS_EXYNOS4_TMU
 	tristate "Temperature sensor on Samsung EXYNOS4"
 	depends on ARCH_EXYNOS4
 	help
-	  If you say yes here you get support for TMU (Thermal Managment
+	  If you say yes here you get support for TMU (Thermal Management
 	  Unit) on SAMSUNG EXYNOS4 series of SoC.
 
 	  This driver can also be built as a module. If so, the module
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d2c5095deeac..94468a64ce3a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -351,7 +351,7 @@ config I2C_DAVINCI
 	  For details please see http://www.ti.com/davinci
 
 config I2C_DESIGNWARE_PLATFORM
-	tristate "Synopsys DesignWare Platfrom"
+	tristate "Synopsys DesignWare Platform"
 	depends on HAVE_CLK
 	help
 	  If you say yes to this option, support will be included for the
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 7b397c6f607e..31c47e18d83c 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -227,6 +227,72 @@ static int __devexit i2c_powermac_remove(struct platform_device *dev)
 	return 0;
 }
 
+static void __devinit i2c_powermac_register_devices(struct i2c_adapter *adap,
+						    struct pmac_i2c_bus *bus)
+{
+	struct i2c_client *newdev;
+	struct device_node *node;
+
+	for_each_child_of_node(adap->dev.of_node, node) {
+		struct i2c_board_info info = {};
+		struct dev_archdata dev_ad = {};
+		const __be32 *reg;
+		char tmp[16];
+		u32 addr;
+		int len;
+
+		/* Get address & channel */
+		reg = of_get_property(node, "reg", &len);
+		if (!reg || (len < sizeof(int))) {
+			dev_err(&adap->dev, "i2c-powermac: invalid reg on %s\n",
+				node->full_name);
+			continue;
+		}
+		addr = be32_to_cpup(reg);
+
+		/* Multibus setup, check channel */
+		if (!pmac_i2c_match_adapter(node, adap))
+			continue;
+
+		dev_dbg(&adap->dev, "i2c-powermac: register %s\n",
+			node->full_name);
+
+		/* Make up a modalias. Note: we to _NOT_ want the standard
+		 * i2c drivers to match with any of our powermac stuff
+		 * unless they have been specifically modified to handle
+		 * it on a case by case basis. For example, for thermal
+		 * control, things like lm75 etc... shall match with their
+		 * corresponding windfarm drivers, _NOT_ the generic ones,
+		 * so we force a prefix of AAPL, onto the modalias to
+		 * make that happen
+		 */
+		if (of_modalias_node(node, tmp, sizeof(tmp)) < 0) {
+			dev_err(&adap->dev, "i2c-powermac: modalias failure"
+				" on %s\n", node->full_name);
+			continue;
+		}
+		snprintf(info.type, sizeof(info.type), "MAC,%s", tmp);
+
+		/* Fill out the rest of the info structure */
+		info.addr = (addr & 0xff) >> 1;
+		info.irq = irq_of_parse_and_map(node, 0);
+		info.of_node = of_node_get(node);
+		info.archdata = &dev_ad;
+
+		newdev = i2c_new_device(adap, &info);
+		if (!newdev) {
+			dev_err(&adap->dev, "i2c-powermac: Failure to register"
+				" %s\n", node->full_name);
+			of_node_put(node);
+			/* We do not dispose of the interrupt mapping on
+			 * purpose. It's not necessary (interrupt cannot be
+			 * re-used) and somebody else might have grabbed it
+			 * via direct DT lookup so let's not bother
+			 */
+			continue;
+		}
+	}
+}
 
 static int __devinit i2c_powermac_probe(struct platform_device *dev)
 {
@@ -272,6 +338,7 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev)
 	adapter->algo = &i2c_powermac_algorithm;
 	i2c_set_adapdata(adapter, bus);
 	adapter->dev.parent = &dev->dev;
+	adapter->dev.of_node = dev->dev.of_node;
 	rc = i2c_add_adapter(adapter);
 	if (rc) {
 		printk(KERN_ERR "i2c-powermac: Adapter %s registration "
@@ -281,33 +348,10 @@ static int __devinit i2c_powermac_probe(struct platform_device *dev)
 
 	printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
 
-	if (!strncmp(basename, "uni-n", 5)) {
-		struct device_node *np;
-		const u32 *prop;
-		struct i2c_board_info info;
-
-		/* Instantiate I2C motion sensor if present */
-		np = of_find_node_by_name(NULL, "accelerometer");
-		if (np && of_device_is_compatible(np, "AAPL,accelerometer_1") &&
-		    (prop = of_get_property(np, "reg", NULL))) {
-			int i2c_bus;
-			const char *tmp_bus;
-
-			/* look for bus either using "reg" or by path */
-			tmp_bus = strstr(np->full_name, "/i2c-bus@");
-			if (tmp_bus)
-				i2c_bus = *(tmp_bus + 9) - '0';
-			else
-				i2c_bus = ((*prop) >> 8) & 0x0f;
-
-			if (pmac_i2c_get_channel(bus) == i2c_bus) {
-				memset(&info, 0, sizeof(struct i2c_board_info));
-				info.addr = ((*prop) & 0xff) >> 1;
-				strlcpy(info.type, "ams", I2C_NAME_SIZE);
-				i2c_new_device(adapter, &info);
-			}
-		}
-	}
+	/* Cannot use of_i2c_register_devices() due to Apple device-tree
+	 * funkyness
+	 */
+	i2c_powermac_register_devices(adapter, bus);
 
 	return rc;
 }
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
index c64ba736f480..b76a29d1f8e4 100644
--- a/drivers/i2c/busses/i2c-s6000.c
+++ b/drivers/i2c/busses/i2c-s6000.c
@@ -3,7 +3,7 @@
  *
  * Description: Driver for S6000 Family I2C Interface
  * Copyright (c) 2008 emlix GmbH
- * Author:	Oskar Schirmer <os@emlix.com>
+ * Author:	Oskar Schirmer <oskar@scara.com>
  *
  * Partially based on i2c-bfin-twi.c driver by <sonic.zhang@analog.com>
  * Copyright (c) 2005-2007 Analog Devices, Inc.
diff --git a/drivers/i2c/busses/i2c-s6000.h b/drivers/i2c/busses/i2c-s6000.h
index ff23b81ded44..4936f9f2256f 100644
--- a/drivers/i2c/busses/i2c-s6000.h
+++ b/drivers/i2c/busses/i2c-s6000.h
@@ -6,7 +6,7 @@
  * for more details.
  *
  * Copyright (C) 2008 Emlix GmbH <info@emlix.com>
- * Author:	Oskar Schirmer <os@emlix.com>
+ * Author:	Oskar Schirmer <oskar@scara.com>
  */
 
 #ifndef __DRIVERS_I2C_BUSSES_I2C_S6000_H
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
new file mode 100644
index 000000000000..56eecefcec75
--- /dev/null
+++ b/drivers/iio/Kconfig
@@ -0,0 +1,54 @@
+#
+# Industrial I/O subsytem configuration
+#
+
+menuconfig IIO
+	tristate "Industrial I/O support"
+	depends on GENERIC_HARDIRQS
+	help
+	  The industrial I/O subsystem provides a unified framework for
+	  drivers for many different types of embedded sensors using a
+	  number of different physical interfaces (i2c, spi, etc). See
+	  Documentation/iio for more information.
+
+if IIO
+
+config IIO_BUFFER
+	bool "Enable buffer support within IIO"
+	help
+	  Provide core support for various buffer based data
+	  acquisition methods.
+
+if IIO_BUFFER
+
+config IIO_KFIFO_BUF
+	select IIO_TRIGGER
+	tristate "Industrial I/O buffering based on kfifo"
+	help
+	  A simple fifo based on kfifo.  Use this if you want a fifo
+	  rather than a ring buffer. Note that this currently provides
+	  no buffer events so it is up to userspace to work out how
+	  often to read from the buffer.
+
+endif # IIO_BUFFER
+
+config IIO_TRIGGER
+	boolean "Enable triggered sampling support"
+	help
+	  Provides IIO core support for triggers.  Currently these
+	  are used to initialize capture of samples to push into
+	  ring buffers.  The triggers are effectively a 'capture
+	  data now' interrupt.
+
+config IIO_CONSUMERS_PER_TRIGGER
+       int "Maximum number of consumers per trigger"
+       depends on IIO_TRIGGER
+       default "2"
+       help
+	This value controls the maximum number of consumers that a
+	given trigger may handle. Default is 2.
+
+source "drivers/iio/adc/Kconfig"
+source "drivers/iio/amplifiers/Kconfig"
+
+endif # IIO
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
new file mode 100644
index 000000000000..e425afd1480c
--- /dev/null
+++ b/drivers/iio/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the industrial I/O core.
+#
+
+obj-$(CONFIG_IIO) += industrialio.o
+industrialio-y := industrialio-core.o industrialio-event.o inkern.o
+industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
+industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
+
+obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
+
+obj-y += adc/
+obj-y += amplifiers/
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
new file mode 100644
index 000000000000..9a0df8123cc4
--- /dev/null
+++ b/drivers/iio/adc/Kconfig
@@ -0,0 +1,16 @@
+#
+# ADC drivers
+#
+menu "Analog to digital converters"
+
+config AT91_ADC
+	tristate "Atmel AT91 ADC"
+	depends on ARCH_AT91
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
+	select IIO_TRIGGER
+	select SYSFS
+	help
+	  Say yes here to build support for Atmel AT91 ADC.
+
+endmenu
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
new file mode 100644
index 000000000000..175c8d41ea99
--- /dev/null
+++ b/drivers/iio/adc/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for IIO ADC drivers
+#
+
+obj-$(CONFIG_AT91_ADC) += at91_adc.o
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
new file mode 100644
index 000000000000..f18a95d80255
--- /dev/null
+++ b/drivers/iio/adc/at91_adc.c
@@ -0,0 +1,802 @@
+/*
+ * Driver for the ADC present in the Atmel AT91 evaluation boards.
+ *
+ * Copyright 2011 Free Electrons
+ *
+ * Licensed under the GPLv2 or later.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+
+#include <linux/platform_data/at91_adc.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include <mach/at91_adc.h>
+
+#define AT91_ADC_CHAN(st, ch) \
+	(st->registers->channel_base + (ch * 4))
+#define at91_adc_readl(st, reg) \
+	(readl_relaxed(st->reg_base + reg))
+#define at91_adc_writel(st, reg, val) \
+	(writel_relaxed(val, st->reg_base + reg))
+
+struct at91_adc_state {
+	struct clk		*adc_clk;
+	u16			*buffer;
+	unsigned long		channels_mask;
+	struct clk		*clk;
+	bool			done;
+	int			irq;
+	bool			irq_enabled;
+	u16			last_value;
+	struct mutex		lock;
+	u8			num_channels;
+	void __iomem		*reg_base;
+	struct at91_adc_reg_desc *registers;
+	u8			startup_time;
+	struct iio_trigger	**trig;
+	struct at91_adc_trigger	*trigger_list;
+	u32			trigger_number;
+	bool			use_external;
+	u32			vref_mv;
+	wait_queue_head_t	wq_data_avail;
+};
+
+static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *idev = pf->indio_dev;
+	struct at91_adc_state *st = iio_priv(idev);
+	struct iio_buffer *buffer = idev->buffer;
+	int i, j = 0;
+
+	for (i = 0; i < idev->masklength; i++) {
+		if (!test_bit(i, idev->active_scan_mask))
+			continue;
+		st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, i));
+		j++;
+	}
+
+	if (idev->scan_timestamp) {
+		s64 *timestamp = (s64 *)((u8 *)st->buffer +
+					ALIGN(j, sizeof(s64)));
+		*timestamp = pf->timestamp;
+	}
+
+	buffer->access->store_to(buffer, (u8 *)st->buffer, pf->timestamp);
+
+	iio_trigger_notify_done(idev->trig);
+	st->irq_enabled = true;
+
+	/* Needed to ACK the DRDY interruption */
+	at91_adc_readl(st, AT91_ADC_LCDR);
+
+	enable_irq(st->irq);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t at91_adc_eoc_trigger(int irq, void *private)
+{
+	struct iio_dev *idev = private;
+	struct at91_adc_state *st = iio_priv(idev);
+	u32 status = at91_adc_readl(st, st->registers->status_register);
+
+	if (!(status & st->registers->drdy_mask))
+		return IRQ_HANDLED;
+
+	if (iio_buffer_enabled(idev)) {
+		disable_irq_nosync(irq);
+		st->irq_enabled = false;
+		iio_trigger_poll(idev->trig, iio_get_time_ns());
+	} else {
+		st->last_value = at91_adc_readl(st, AT91_ADC_LCDR);
+		st->done = true;
+		wake_up_interruptible(&st->wq_data_avail);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int at91_adc_channel_init(struct iio_dev *idev)
+{
+	struct at91_adc_state *st = iio_priv(idev);
+	struct iio_chan_spec *chan_array, *timestamp;
+	int bit, idx = 0;
+
+	idev->num_channels = bitmap_weight(&st->channels_mask,
+					   st->num_channels) + 1;
+
+	chan_array = devm_kzalloc(&idev->dev,
+				  ((idev->num_channels + 1) *
+					sizeof(struct iio_chan_spec)),
+				  GFP_KERNEL);
+
+	if (!chan_array)
+		return -ENOMEM;
+
+	for_each_set_bit(bit, &st->channels_mask, st->num_channels) {
+		struct iio_chan_spec *chan = chan_array + idx;
+
+		chan->type = IIO_VOLTAGE;
+		chan->indexed = 1;
+		chan->channel = bit;
+		chan->scan_index = idx;
+		chan->scan_type.sign = 'u';
+		chan->scan_type.realbits = 10;
+		chan->scan_type.storagebits = 16;
+		chan->info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+			IIO_CHAN_INFO_RAW_SEPARATE_BIT;
+		idx++;
+	}
+	timestamp = chan_array + idx;
+
+	timestamp->type = IIO_TIMESTAMP;
+	timestamp->channel = -1;
+	timestamp->scan_index = idx;
+	timestamp->scan_type.sign = 's';
+	timestamp->scan_type.realbits = 64;
+	timestamp->scan_type.storagebits = 64;
+
+	idev->channels = chan_array;
+	return idev->num_channels;
+}
+
+static u8 at91_adc_get_trigger_value_by_name(struct iio_dev *idev,
+					     struct at91_adc_trigger *triggers,
+					     const char *trigger_name)
+{
+	struct at91_adc_state *st = iio_priv(idev);
+	u8 value = 0;
+	int i;
+
+	for (i = 0; i < st->trigger_number; i++) {
+		char *name = kasprintf(GFP_KERNEL,
+				"%s-dev%d-%s",
+				idev->name,
+				idev->id,
+				triggers[i].name);
+		if (!name)
+			return -ENOMEM;
+
+		if (strcmp(trigger_name, name) == 0) {
+			value = triggers[i].value;
+			kfree(name);
+			break;
+		}
+
+		kfree(name);
+	}
+
+	return value;
+}
+
+static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *idev = trig->private_data;
+	struct at91_adc_state *st = iio_priv(idev);
+	struct iio_buffer *buffer = idev->buffer;
+	struct at91_adc_reg_desc *reg = st->registers;
+	u32 status = at91_adc_readl(st, reg->trigger_register);
+	u8 value;
+	u8 bit;
+
+	value = at91_adc_get_trigger_value_by_name(idev,
+						   st->trigger_list,
+						   idev->trig->name);
+	if (value == 0)
+		return -EINVAL;
+
+	if (state) {
+		st->buffer = kmalloc(idev->scan_bytes, GFP_KERNEL);
+		if (st->buffer == NULL)
+			return -ENOMEM;
+
+		at91_adc_writel(st, reg->trigger_register,
+				status | value);
+
+		for_each_set_bit(bit, buffer->scan_mask,
+				 st->num_channels) {
+			struct iio_chan_spec const *chan = idev->channels + bit;
+			at91_adc_writel(st, AT91_ADC_CHER,
+					AT91_ADC_CH(chan->channel));
+		}
+
+		at91_adc_writel(st, AT91_ADC_IER, reg->drdy_mask);
+
+	} else {
+		at91_adc_writel(st, AT91_ADC_IDR, reg->drdy_mask);
+
+		at91_adc_writel(st, reg->trigger_register,
+				status & ~value);
+
+		for_each_set_bit(bit, buffer->scan_mask,
+				 st->num_channels) {
+			struct iio_chan_spec const *chan = idev->channels + bit;
+			at91_adc_writel(st, AT91_ADC_CHDR,
+					AT91_ADC_CH(chan->channel));
+		}
+		kfree(st->buffer);
+	}
+
+	return 0;
+}
+
+static const struct iio_trigger_ops at91_adc_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = &at91_adc_configure_trigger,
+};
+
+static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *idev,
+						     struct at91_adc_trigger *trigger)
+{
+	struct iio_trigger *trig;
+	int ret;
+
+	trig = iio_trigger_alloc("%s-dev%d-%s", idev->name,
+				 idev->id, trigger->name);
+	if (trig == NULL)
+		return NULL;
+
+	trig->dev.parent = idev->dev.parent;
+	trig->private_data = idev;
+	trig->ops = &at91_adc_trigger_ops;
+
+	ret = iio_trigger_register(trig);
+	if (ret)
+		return NULL;
+
+	return trig;
+}
+
+static int at91_adc_trigger_init(struct iio_dev *idev)
+{
+	struct at91_adc_state *st = iio_priv(idev);
+	int i, ret;
+
+	st->trig = devm_kzalloc(&idev->dev,
+				st->trigger_number * sizeof(st->trig),
+				GFP_KERNEL);
+
+	if (st->trig == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	for (i = 0; i < st->trigger_number; i++) {
+		if (st->trigger_list[i].is_external && !(st->use_external))
+			continue;
+
+		st->trig[i] = at91_adc_allocate_trigger(idev,
+							st->trigger_list + i);
+		if (st->trig[i] == NULL) {
+			dev_err(&idev->dev,
+				"Could not allocate trigger %d\n", i);
+			ret = -ENOMEM;
+			goto error_trigger;
+		}
+	}
+
+	return 0;
+
+error_trigger:
+	for (i--; i >= 0; i--) {
+		iio_trigger_unregister(st->trig[i]);
+		iio_trigger_free(st->trig[i]);
+	}
+error_ret:
+	return ret;
+}
+
+static void at91_adc_trigger_remove(struct iio_dev *idev)
+{
+	struct at91_adc_state *st = iio_priv(idev);
+	int i;
+
+	for (i = 0; i < st->trigger_number; i++) {
+		iio_trigger_unregister(st->trig[i]);
+		iio_trigger_free(st->trig[i]);
+	}
+}
+
+static const struct iio_buffer_setup_ops at91_adc_buffer_ops = {
+	.preenable = &iio_sw_buffer_preenable,
+	.postenable = &iio_triggered_buffer_postenable,
+	.predisable = &iio_triggered_buffer_predisable,
+};
+
+static int at91_adc_buffer_init(struct iio_dev *idev)
+{
+	int ret;
+
+	idev->buffer = iio_kfifo_allocate(idev);
+	if (!idev->buffer) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	idev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time,
+					    &at91_adc_trigger_handler,
+					    IRQF_ONESHOT,
+					    idev,
+					    "%s-consumer%d",
+					    idev->name,
+					    idev->id);
+	if (idev->pollfunc == NULL) {
+		ret = -ENOMEM;
+		goto error_pollfunc;
+	}
+
+	idev->setup_ops = &at91_adc_buffer_ops;
+	idev->modes |= INDIO_BUFFER_TRIGGERED;
+
+	ret = iio_buffer_register(idev,
+				  idev->channels,
+				  idev->num_channels);
+	if (ret)
+		goto error_register;
+
+	return 0;
+
+error_register:
+	iio_dealloc_pollfunc(idev->pollfunc);
+error_pollfunc:
+	iio_kfifo_free(idev->buffer);
+error_ret:
+	return ret;
+}
+
+static void at91_adc_buffer_remove(struct iio_dev *idev)
+{
+	iio_buffer_unregister(idev);
+	iio_dealloc_pollfunc(idev->pollfunc);
+	iio_kfifo_free(idev->buffer);
+}
+
+static int at91_adc_read_raw(struct iio_dev *idev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct at91_adc_state *st = iio_priv(idev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&st->lock);
+
+		at91_adc_writel(st, AT91_ADC_CHER,
+				AT91_ADC_CH(chan->channel));
+		at91_adc_writel(st, AT91_ADC_IER, st->registers->drdy_mask);
+		at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_START);
+
+		ret = wait_event_interruptible_timeout(st->wq_data_avail,
+						       st->done,
+						       msecs_to_jiffies(1000));
+		if (ret == 0)
+			return -ETIMEDOUT;
+		else if (ret < 0)
+			return ret;
+
+		*val = st->last_value;
+
+		at91_adc_writel(st, AT91_ADC_CHDR,
+				AT91_ADC_CH(chan->channel));
+		at91_adc_writel(st, AT91_ADC_IDR, st->registers->drdy_mask);
+
+		st->last_value = 0;
+		st->done = false;
+		mutex_unlock(&st->lock);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = (st->vref_mv * 1000) >> chan->scan_type.realbits;
+		*val2 = 0;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		break;
+	}
+	return -EINVAL;
+}
+
+static int at91_adc_probe_dt(struct at91_adc_state *st,
+			     struct platform_device *pdev)
+{
+	struct iio_dev *idev = iio_priv_to_dev(st);
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *trig_node;
+	int i = 0, ret;
+	u32 prop;
+
+	if (!node)
+		return -EINVAL;
+
+	st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers");
+
+	if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) {
+		dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->channels_mask = prop;
+
+	if (of_property_read_u32(node, "atmel,adc-num-channels", &prop)) {
+		dev_err(&idev->dev, "Missing adc-num-channels property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->num_channels = prop;
+
+	if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
+		dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->startup_time = prop;
+
+
+	if (of_property_read_u32(node, "atmel,adc-vref", &prop)) {
+		dev_err(&idev->dev, "Missing adc-vref property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->vref_mv = prop;
+
+	st->registers = devm_kzalloc(&idev->dev,
+				     sizeof(struct at91_adc_reg_desc),
+				     GFP_KERNEL);
+	if (!st->registers) {
+		dev_err(&idev->dev, "Could not allocate register memory.\n");
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	if (of_property_read_u32(node, "atmel,adc-channel-base", &prop)) {
+		dev_err(&idev->dev, "Missing adc-channel-base property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->registers->channel_base = prop;
+
+	if (of_property_read_u32(node, "atmel,adc-drdy-mask", &prop)) {
+		dev_err(&idev->dev, "Missing adc-drdy-mask property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->registers->drdy_mask = prop;
+
+	if (of_property_read_u32(node, "atmel,adc-status-register", &prop)) {
+		dev_err(&idev->dev, "Missing adc-status-register property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->registers->status_register = prop;
+
+	if (of_property_read_u32(node, "atmel,adc-trigger-register", &prop)) {
+		dev_err(&idev->dev, "Missing adc-trigger-register property in the DT.\n");
+		ret = -EINVAL;
+		goto error_ret;
+	}
+	st->registers->trigger_register = prop;
+
+	st->trigger_number = of_get_child_count(node);
+	st->trigger_list = devm_kzalloc(&idev->dev, st->trigger_number *
+					sizeof(struct at91_adc_trigger),
+					GFP_KERNEL);
+	if (!st->trigger_list) {
+		dev_err(&idev->dev, "Could not allocate trigger list memory.\n");
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	for_each_child_of_node(node, trig_node) {
+		struct at91_adc_trigger *trig = st->trigger_list + i;
+		const char *name;
+
+		if (of_property_read_string(trig_node, "trigger-name", &name)) {
+			dev_err(&idev->dev, "Missing trigger-name property in the DT.\n");
+			ret = -EINVAL;
+			goto error_ret;
+		}
+	        trig->name = name;
+
+		if (of_property_read_u32(trig_node, "trigger-value", &prop)) {
+			dev_err(&idev->dev, "Missing trigger-value property in the DT.\n");
+			ret = -EINVAL;
+			goto error_ret;
+		}
+	        trig->value = prop;
+		trig->is_external = of_property_read_bool(trig_node, "trigger-external");
+		i++;
+	}
+
+	return 0;
+
+error_ret:
+	return ret;
+}
+
+static int at91_adc_probe_pdata(struct at91_adc_state *st,
+				struct platform_device *pdev)
+{
+	struct at91_adc_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return -EINVAL;
+
+	st->use_external = pdata->use_external_triggers;
+	st->vref_mv = pdata->vref;
+	st->channels_mask = pdata->channels_used;
+	st->num_channels = pdata->num_channels;
+	st->startup_time = pdata->startup_time;
+	st->trigger_number = pdata->trigger_number;
+	st->trigger_list = pdata->trigger_list;
+	st->registers = pdata->registers;
+
+	return 0;
+}
+
+static const struct iio_info at91_adc_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &at91_adc_read_raw,
+};
+
+static int __devinit at91_adc_probe(struct platform_device *pdev)
+{
+	unsigned int prsc, mstrclk, ticks, adc_clk;
+	int ret;
+	struct iio_dev *idev;
+	struct at91_adc_state *st;
+	struct resource *res;
+
+	idev = iio_device_alloc(sizeof(struct at91_adc_state));
+	if (idev == NULL) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	st = iio_priv(idev);
+
+	if (pdev->dev.of_node)
+		ret = at91_adc_probe_dt(st, pdev);
+	else
+		ret = at91_adc_probe_pdata(st, pdev);
+
+	if (ret) {
+		dev_err(&pdev->dev, "No platform data available.\n");
+		ret = -EINVAL;
+		goto error_free_device;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "No resource defined\n");
+		ret = -ENXIO;
+		goto error_ret;
+	}
+
+	platform_set_drvdata(pdev, idev);
+
+	idev->dev.parent = &pdev->dev;
+	idev->name = dev_name(&pdev->dev);
+	idev->modes = INDIO_DIRECT_MODE;
+	idev->info = &at91_adc_info;
+
+	st->irq = platform_get_irq(pdev, 0);
+	if (st->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ ID is designated\n");
+		ret = -ENODEV;
+		goto error_free_device;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				"AT91 adc registers")) {
+		dev_err(&pdev->dev, "Resources are unavailable.\n");
+		ret = -EBUSY;
+		goto error_free_device;
+	}
+
+	st->reg_base = ioremap(res->start, resource_size(res));
+	if (!st->reg_base) {
+		dev_err(&pdev->dev, "Failed to map registers.\n");
+		ret = -ENOMEM;
+		goto error_release_mem;
+	}
+
+	/*
+	 * Disable all IRQs before setting up the handler
+	 */
+	at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST);
+	at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF);
+	ret = request_irq(st->irq,
+			  at91_adc_eoc_trigger,
+			  0,
+			  pdev->dev.driver->name,
+			  idev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
+		goto error_unmap_reg;
+	}
+
+	st->clk = clk_get(&pdev->dev, "adc_clk");
+	if (IS_ERR(st->clk)) {
+		dev_err(&pdev->dev, "Failed to get the clock.\n");
+		ret = PTR_ERR(st->clk);
+		goto error_free_irq;
+	}
+
+	ret = clk_prepare(st->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not prepare the clock.\n");
+		goto error_free_clk;
+	}
+
+	ret = clk_enable(st->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not enable the clock.\n");
+		goto error_unprepare_clk;
+	}
+
+	st->adc_clk = clk_get(&pdev->dev, "adc_op_clk");
+	if (IS_ERR(st->adc_clk)) {
+		dev_err(&pdev->dev, "Failed to get the ADC clock.\n");
+		ret = PTR_ERR(st->clk);
+		goto error_disable_clk;
+	}
+
+	ret = clk_prepare(st->adc_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not prepare the ADC clock.\n");
+		goto error_free_adc_clk;
+	}
+
+	ret = clk_enable(st->adc_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not enable the ADC clock.\n");
+		goto error_unprepare_adc_clk;
+	}
+
+	/*
+	 * Prescaler rate computation using the formula from the Atmel's
+	 * datasheet : ADC Clock = MCK / ((Prescaler + 1) * 2), ADC Clock being
+	 * specified by the electrical characteristics of the board.
+	 */
+	mstrclk = clk_get_rate(st->clk);
+	adc_clk = clk_get_rate(st->adc_clk);
+	prsc = (mstrclk / (2 * adc_clk)) - 1;
+
+	if (!st->startup_time) {
+		dev_err(&pdev->dev, "No startup time available.\n");
+		ret = -EINVAL;
+		goto error_disable_adc_clk;
+	}
+
+	/*
+	 * Number of ticks needed to cover the startup time of the ADC as
+	 * defined in the electrical characteristics of the board, divided by 8.
+	 * The formula thus is : Startup Time = (ticks + 1) * 8 / ADC Clock
+	 */
+	ticks = round_up((st->startup_time * adc_clk /
+			  1000000) - 1, 8) / 8;
+	at91_adc_writel(st, AT91_ADC_MR,
+			(AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) |
+			(AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP));
+
+	/* Setup the ADC channels available on the board */
+	ret = at91_adc_channel_init(idev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Couldn't initialize the channels.\n");
+		goto error_disable_adc_clk;
+	}
+
+	init_waitqueue_head(&st->wq_data_avail);
+	mutex_init(&st->lock);
+
+	ret = at91_adc_buffer_init(idev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Couldn't initialize the buffer.\n");
+		goto error_disable_adc_clk;
+	}
+
+	ret = at91_adc_trigger_init(idev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Couldn't setup the triggers.\n");
+		goto error_unregister_buffer;
+	}
+
+	ret = iio_device_register(idev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Couldn't register the device.\n");
+		goto error_remove_triggers;
+	}
+
+	return 0;
+
+error_remove_triggers:
+	at91_adc_trigger_remove(idev);
+error_unregister_buffer:
+	at91_adc_buffer_remove(idev);
+error_disable_adc_clk:
+	clk_disable(st->adc_clk);
+error_unprepare_adc_clk:
+	clk_unprepare(st->adc_clk);
+error_free_adc_clk:
+	clk_put(st->adc_clk);
+error_disable_clk:
+	clk_disable(st->clk);
+error_unprepare_clk:
+	clk_unprepare(st->clk);
+error_free_clk:
+	clk_put(st->clk);
+error_free_irq:
+	free_irq(st->irq, idev);
+error_unmap_reg:
+	iounmap(st->reg_base);
+error_release_mem:
+	release_mem_region(res->start, resource_size(res));
+error_free_device:
+	iio_device_free(idev);
+error_ret:
+	return ret;
+}
+
+static int __devexit at91_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *idev = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct at91_adc_state *st = iio_priv(idev);
+
+	iio_device_unregister(idev);
+	at91_adc_trigger_remove(idev);
+	at91_adc_buffer_remove(idev);
+	clk_disable_unprepare(st->adc_clk);
+	clk_put(st->adc_clk);
+	clk_disable(st->clk);
+	clk_unprepare(st->clk);
+	clk_put(st->clk);
+	free_irq(st->irq, idev);
+	iounmap(st->reg_base);
+	release_mem_region(res->start, resource_size(res));
+	iio_device_free(idev);
+
+	return 0;
+}
+
+static const struct of_device_id at91_adc_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9260-adc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, at91_adc_dt_ids);
+
+static struct platform_driver at91_adc_driver = {
+	.probe = at91_adc_probe,
+	.remove = __devexit_p(at91_adc_remove),
+	.driver = {
+		   .name = "at91_adc",
+		   .of_match_table = of_match_ptr(at91_adc_dt_ids),
+	},
+};
+
+module_platform_driver(at91_adc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Atmel AT91 ADC Driver");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig
new file mode 100644
index 000000000000..05d707ed7d4f
--- /dev/null
+++ b/drivers/iio/amplifiers/Kconfig
@@ -0,0 +1,17 @@
+#
+# Gain Amplifiers, etc.
+#
+menu "Amplifiers"
+
+config AD8366
+	tristate "Analog Devices AD8366 VGA"
+	depends on SPI
+	select BITREVERSE
+	help
+	  Say yes here to build support for Analog Devices AD8366
+	  SPI Dual-Digital Variable Gain Amplifier (VGA).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad8366.
+
+endmenu
diff --git a/drivers/iio/amplifiers/Makefile b/drivers/iio/amplifiers/Makefile
new file mode 100644
index 000000000000..a6ca366908e0
--- /dev/null
+++ b/drivers/iio/amplifiers/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile iio/amplifiers
+#
+
+obj-$(CONFIG_AD8366) += ad8366.o
diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c
new file mode 100644
index 000000000000..d8281cdbfc4a
--- /dev/null
+++ b/drivers/iio/amplifiers/ad8366.c
@@ -0,0 +1,222 @@
+/*
+ * AD8366 SPI Dual-Digital Variable Gain Amplifier (VGA)
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/bitrev.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+struct ad8366_state {
+	struct spi_device	*spi;
+	struct regulator	*reg;
+	unsigned char		ch[2];
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	unsigned char		data[2] ____cacheline_aligned;
+};
+
+static int ad8366_write(struct iio_dev *indio_dev,
+			unsigned char ch_a, char unsigned ch_b)
+{
+	struct ad8366_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ch_a = bitrev8(ch_a & 0x3F);
+	ch_b = bitrev8(ch_b & 0x3F);
+
+	st->data[0] = ch_b >> 4;
+	st->data[1] = (ch_b << 4) | (ch_a >> 2);
+
+	ret = spi_write(st->spi, st->data, ARRAY_SIZE(st->data));
+	if (ret < 0)
+		dev_err(&indio_dev->dev, "write failed (%d)", ret);
+
+	return ret;
+}
+
+static int ad8366_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	struct ad8366_state *st = iio_priv(indio_dev);
+	int ret;
+	unsigned code;
+
+	mutex_lock(&indio_dev->mlock);
+	switch (m) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		code = st->ch[chan->channel];
+
+		/* Values in dB */
+		code = code * 253 + 4500;
+		*val = code / 1000;
+		*val2 = (code % 1000) * 1000;
+
+		ret = IIO_VAL_INT_PLUS_MICRO_DB;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+};
+
+static int ad8366_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct ad8366_state *st = iio_priv(indio_dev);
+	unsigned code;
+	int ret;
+
+	if (val < 0 || val2 < 0)
+		return -EINVAL;
+
+	/* Values in dB */
+	code = (((u8)val * 1000) + ((u32)val2 / 1000));
+
+	if (code > 20500 || code < 4500)
+		return -EINVAL;
+
+	code = (code - 4500) / 253;
+
+	mutex_lock(&indio_dev->mlock);
+	switch (mask) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		st->ch[chan->channel] = code;
+		ret = ad8366_write(indio_dev, st->ch[0], st->ch[1]);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static const struct iio_info ad8366_info = {
+	.read_raw = &ad8366_read_raw,
+	.write_raw = &ad8366_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+#define AD8366_CHAN(_channel) {				\
+	.type = IIO_VOLTAGE,				\
+	.output = 1,					\
+	.indexed = 1,					\
+	.channel = _channel,				\
+	.info_mask = IIO_CHAN_INFO_HARDWAREGAIN_SEPARATE_BIT,\
+}
+
+static const struct iio_chan_spec ad8366_channels[] = {
+	AD8366_CHAN(0),
+	AD8366_CHAN(1),
+};
+
+static int __devinit ad8366_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ad8366_state *st;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->reg = regulator_get(&spi->dev, "vcc");
+	if (!IS_ERR(st->reg)) {
+		ret = regulator_enable(st->reg);
+		if (ret)
+			goto error_put_reg;
+	}
+
+	spi_set_drvdata(spi, indio_dev);
+	st->spi = spi;
+
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->info = &ad8366_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ad8366_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_disable_reg;
+
+	ad8366_write(indio_dev, 0 , 0);
+
+	return 0;
+
+error_disable_reg:
+	if (!IS_ERR(st->reg))
+		regulator_disable(st->reg);
+error_put_reg:
+	if (!IS_ERR(st->reg))
+		regulator_put(st->reg);
+
+	iio_device_free(indio_dev);
+
+	return ret;
+}
+
+static int __devexit ad8366_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ad8366_state *st = iio_priv(indio_dev);
+	struct regulator *reg = st->reg;
+
+	iio_device_unregister(indio_dev);
+
+	if (!IS_ERR(reg)) {
+		regulator_disable(reg);
+		regulator_put(reg);
+	}
+
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id ad8366_id[] = {
+	{"ad8366", 0},
+	{}
+};
+
+static struct spi_driver ad8366_driver = {
+	.driver = {
+		.name	= KBUILD_MODNAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ad8366_probe,
+	.remove		= __devexit_p(ad8366_remove),
+	.id_table	= ad8366_id,
+};
+
+module_spi_driver(ad8366_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD8366 VGA");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/iio_core.h b/drivers/iio/iio_core.h
index c9dfcba0bac8..f652e6ae5a35 100644
--- a/drivers/staging/iio/iio_core.h
+++ b/drivers/iio/iio_core.h
@@ -12,6 +12,12 @@
 
 #ifndef _IIO_CORE_H_
 #define _IIO_CORE_H_
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+struct iio_chan_spec;
+struct iio_dev;
+
 
 int __iio_add_chan_devattr(const char *postfix,
 			   struct iio_chan_spec const *chan,
diff --git a/drivers/staging/iio/iio_core_trigger.h b/drivers/iio/iio_core_trigger.h
index 6f7c56fcbe78..6f7c56fcbe78 100644
--- a/drivers/staging/iio/iio_core_trigger.h
+++ b/drivers/iio/iio_core_trigger.h
diff --git a/drivers/staging/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 386ba760f3f1..ac185b8694bd 100644
--- a/drivers/staging/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -21,10 +21,10 @@
 #include <linux/slab.h>
 #include <linux/poll.h>
 
-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
-#include "sysfs.h"
-#include "buffer.h"
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 static const char * const iio_endian_prefix[] = {
 	[IIO_BE] = "be",
@@ -105,7 +105,7 @@ static ssize_t iio_scan_el_show(struct device *dev,
 				char *buf)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 
 	ret = test_bit(to_iio_dev_attr(attr)->address,
 		       indio_dev->buffer->scan_mask);
@@ -124,13 +124,15 @@ static ssize_t iio_scan_el_store(struct device *dev,
 				 const char *buf,
 				 size_t len)
 {
-	int ret = 0;
+	int ret;
 	bool state;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
-	state = !(buf[0] == '0');
+	ret = strtobool(buf, &state);
+	if (ret < 0)
+		return ret;
 	mutex_lock(&indio_dev->mlock);
 	if (iio_buffer_enabled(indio_dev)) {
 		ret = -EBUSY;
@@ -160,7 +162,7 @@ static ssize_t iio_scan_el_ts_show(struct device *dev,
 				   struct device_attribute *attr,
 				   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	return sprintf(buf, "%d\n", indio_dev->buffer->scan_timestamp);
 }
 
@@ -169,17 +171,21 @@ static ssize_t iio_scan_el_ts_store(struct device *dev,
 				    const char *buf,
 				    size_t len)
 {
-	int ret = 0;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	int ret;
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	bool state;
 
-	state = !(buf[0] == '0');
+	ret = strtobool(buf, &state);
+	if (ret < 0)
+		return ret;
+
 	mutex_lock(&indio_dev->mlock);
 	if (iio_buffer_enabled(indio_dev)) {
 		ret = -EBUSY;
 		goto error_ret;
 	}
 	indio_dev->buffer->scan_timestamp = state;
+	indio_dev->scan_timestamp = state;
 error_ret:
 	mutex_unlock(&indio_dev->mlock);
 
@@ -291,7 +297,7 @@ int iio_buffer_register(struct iio_dev *indio_dev,
 				goto error_cleanup_dynamic;
 			attrcount += ret;
 			if (channels[i].type == IIO_TIMESTAMP)
-				buffer->scan_index_timestamp =
+				indio_dev->scan_index_timestamp =
 					channels[i].scan_index;
 		}
 		if (indio_dev->masklength && buffer->scan_mask == NULL) {
@@ -346,7 +352,7 @@ ssize_t iio_buffer_read_length(struct device *dev,
 			       struct device_attribute *attr,
 			       char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;
 
 	if (buffer->access->get_length)
@@ -364,7 +370,7 @@ ssize_t iio_buffer_write_length(struct device *dev,
 {
 	int ret;
 	ulong val;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;
 
 	ret = strict_strtoul(buf, 10, &val);
@@ -397,7 +403,7 @@ ssize_t iio_buffer_store_enable(struct device *dev,
 	int ret;
 	bool requested_state, current_state;
 	int previous_mode;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_buffer *buffer = indio_dev->buffer;
 
 	mutex_lock(&indio_dev->mlock);
@@ -483,7 +489,7 @@ ssize_t iio_buffer_show_enable(struct device *dev,
 			       struct device_attribute *attr,
 			       char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	return sprintf(buf, "%d\n", iio_buffer_enabled(indio_dev));
 }
 EXPORT_SYMBOL(iio_buffer_show_enable);
@@ -503,30 +509,41 @@ static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks,
 	return NULL;
 }
 
-int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
+static int iio_compute_scan_bytes(struct iio_dev *indio_dev, const long *mask,
+				  bool timestamp)
 {
-	struct iio_buffer *buffer = indio_dev->buffer;
 	const struct iio_chan_spec *ch;
 	unsigned bytes = 0;
 	int length, i;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
 
 	/* How much space will the demuxed element take? */
-	for_each_set_bit(i, buffer->scan_mask,
+	for_each_set_bit(i, mask,
 			 indio_dev->masklength) {
 		ch = iio_find_channel_from_si(indio_dev, i);
-		length = ch->scan_type.storagebits/8;
+		length = ch->scan_type.storagebits / 8;
 		bytes = ALIGN(bytes, length);
 		bytes += length;
 	}
-	if (buffer->scan_timestamp) {
+	if (timestamp) {
 		ch = iio_find_channel_from_si(indio_dev,
-					      buffer->scan_index_timestamp);
-		length = ch->scan_type.storagebits/8;
+					      indio_dev->scan_index_timestamp);
+		length = ch->scan_type.storagebits / 8;
 		bytes = ALIGN(bytes, length);
 		bytes += length;
 	}
-	buffer->access->set_bytes_per_datum(buffer, bytes);
+	return bytes;
+}
+
+int iio_sw_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct iio_buffer *buffer = indio_dev->buffer;
+	dev_dbg(&indio_dev->dev, "%s\n", __func__);
+
+	/* How much space will the demuxed element take? */
+	indio_dev->scan_bytes =
+		iio_compute_scan_bytes(indio_dev, buffer->scan_mask,
+				       buffer->scan_timestamp);
+	buffer->access->set_bytes_per_datum(buffer, indio_dev->scan_bytes);
 
 	/* What scan mask do we actually have ?*/
 	if (indio_dev->available_scan_masks)
@@ -638,19 +655,25 @@ int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data,
 }
 EXPORT_SYMBOL_GPL(iio_push_to_buffer);
 
+static void iio_buffer_demux_free(struct iio_buffer *buffer)
+{
+	struct iio_demux_table *p, *q;
+	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
+		list_del(&p->l);
+		kfree(p);
+	}
+}
+
 int iio_update_demux(struct iio_dev *indio_dev)
 {
 	const struct iio_chan_spec *ch;
 	struct iio_buffer *buffer = indio_dev->buffer;
 	int ret, in_ind = -1, out_ind, length;
 	unsigned in_loc = 0, out_loc = 0;
-	struct iio_demux_table *p, *q;
+	struct iio_demux_table *p;
 
 	/* Clear out any old demux */
-	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
-		list_del(&p->l);
-		kfree(p);
-	}
+	iio_buffer_demux_free(buffer);
 	kfree(buffer->demux_bounce);
 	buffer->demux_bounce = NULL;
 
@@ -704,7 +727,7 @@ int iio_update_demux(struct iio_dev *indio_dev)
 			goto error_clear_mux_table;
 		}
 		ch = iio_find_channel_from_si(indio_dev,
-			buffer->scan_index_timestamp);
+			indio_dev->scan_index_timestamp);
 		length = ch->scan_type.storagebits/8;
 		if (out_loc % length)
 			out_loc += length - out_loc % length;
@@ -725,10 +748,8 @@ int iio_update_demux(struct iio_dev *indio_dev)
 	return 0;
 
 error_clear_mux_table:
-	list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
-		list_del(&p->l);
-		kfree(p);
-	}
+	iio_buffer_demux_free(buffer);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(iio_update_demux);
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index d303bfbff27f..1ddd8861c71b 100644
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -23,11 +23,11 @@
 #include <linux/slab.h>
 #include <linux/anon_inodes.h>
 #include <linux/debugfs.h>
-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
 #include "iio_core_trigger.h"
-#include "sysfs.h"
-#include "events.h"
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 /* IDA to assign each registered device a unique id*/
 static DEFINE_IDA(iio_ida);
@@ -42,11 +42,6 @@ EXPORT_SYMBOL(iio_bus_type);
 
 static struct dentry *iio_debugfs_dentry;
 
-static const char * const iio_data_type_name[] = {
-	[IIO_RAW] = "raw",
-	[IIO_PROCESSED] = "input",
-};
-
 static const char * const iio_direction[] = {
 	[0] = "in",
 	[1] = "out",
@@ -68,6 +63,7 @@ static const char * const iio_chan_type_name_spec[] = {
 	[IIO_ANGL] = "angl",
 	[IIO_TIMESTAMP] = "timestamp",
 	[IIO_CAPACITANCE] = "capacitance",
+	[IIO_ALTVOLTAGE] = "altvoltage",
 };
 
 static const char * const iio_modifier_names[] = {
@@ -80,6 +76,8 @@ static const char * const iio_modifier_names[] = {
 
 /* relies on pairs of these shared then separate */
 static const char * const iio_chan_info_postfix[] = {
+	[IIO_CHAN_INFO_RAW] = "raw",
+	[IIO_CHAN_INFO_PROCESSED] = "input",
 	[IIO_CHAN_INFO_SCALE] = "scale",
 	[IIO_CHAN_INFO_OFFSET] = "offset",
 	[IIO_CHAN_INFO_CALIBSCALE] = "calibscale",
@@ -90,6 +88,10 @@ static const char * const iio_chan_info_postfix[] = {
 	[IIO_CHAN_INFO_AVERAGE_RAW] = "mean_raw",
 	[IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY]
 	= "filter_low_pass_3db_frequency",
+	[IIO_CHAN_INFO_SAMP_FREQ] = "sampling_frequency",
+	[IIO_CHAN_INFO_FREQUENCY] = "frequency",
+	[IIO_CHAN_INFO_PHASE] = "phase",
+	[IIO_CHAN_INFO_HARDWAREGAIN] = "hardwaregain",
 };
 
 const struct iio_chan_spec
@@ -151,14 +153,6 @@ static void __exit iio_exit(void)
 }
 
 #if defined(CONFIG_DEBUG_FS)
-static int iio_debugfs_open(struct inode *inode, struct file *file)
-{
-	if (inode->i_private)
-		file->private_data = inode->i_private;
-
-	return 0;
-}
-
 static ssize_t iio_debugfs_read_reg(struct file *file, char __user *userbuf,
 			      size_t count, loff_t *ppos)
 {
@@ -217,7 +211,7 @@ static ssize_t iio_debugfs_write_reg(struct file *file,
 }
 
 static const struct file_operations iio_debugfs_reg_fops = {
-	.open = iio_debugfs_open,
+	.open = simple_open,
 	.read = iio_debugfs_read_reg,
 	.write = iio_debugfs_write_reg,
 };
@@ -234,15 +228,12 @@ static int iio_device_register_debugfs(struct iio_dev *indio_dev)
 	if (indio_dev->info->debugfs_reg_access == NULL)
 		return 0;
 
-	if (IS_ERR(iio_debugfs_dentry))
+	if (!iio_debugfs_dentry)
 		return 0;
 
 	indio_dev->debugfs_dentry =
 		debugfs_create_dir(dev_name(&indio_dev->dev),
 				   iio_debugfs_dentry);
-	if (IS_ERR(indio_dev->debugfs_dentry))
-		return PTR_ERR(indio_dev->debugfs_dentry);
-
 	if (indio_dev->debugfs_dentry == NULL) {
 		dev_warn(indio_dev->dev.parent,
 			 "Failed to create debugfs directory\n");
@@ -274,13 +265,13 @@ static ssize_t iio_read_channel_ext_info(struct device *dev,
 				     struct device_attribute *attr,
 				     char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	const struct iio_chan_spec_ext_info *ext_info;
 
 	ext_info = &this_attr->c->ext_info[this_attr->address];
 
-	return ext_info->read(indio_dev, this_attr->c, buf);
+	return ext_info->read(indio_dev, ext_info->private, this_attr->c, buf);
 }
 
 static ssize_t iio_write_channel_ext_info(struct device *dev,
@@ -288,42 +279,50 @@ static ssize_t iio_write_channel_ext_info(struct device *dev,
 				     const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	const struct iio_chan_spec_ext_info *ext_info;
 
 	ext_info = &this_attr->c->ext_info[this_attr->address];
 
-	return ext_info->write(indio_dev, this_attr->c, buf, len);
+	return ext_info->write(indio_dev, ext_info->private,
+			       this_attr->c, buf, len);
 }
 
 static ssize_t iio_read_channel_info(struct device *dev,
 				     struct device_attribute *attr,
 				     char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int val, val2;
+	bool scale_db = false;
 	int ret = indio_dev->info->read_raw(indio_dev, this_attr->c,
 					    &val, &val2, this_attr->address);
 
 	if (ret < 0)
 		return ret;
 
-	if (ret == IIO_VAL_INT)
+	switch (ret) {
+	case IIO_VAL_INT:
 		return sprintf(buf, "%d\n", val);
-	else if (ret == IIO_VAL_INT_PLUS_MICRO) {
+	case IIO_VAL_INT_PLUS_MICRO_DB:
+		scale_db = true;
+	case IIO_VAL_INT_PLUS_MICRO:
 		if (val2 < 0)
-			return sprintf(buf, "-%d.%06u\n", val, -val2);
+			return sprintf(buf, "-%d.%06u%s\n", val, -val2,
+				scale_db ? " dB" : "");
 		else
-			return sprintf(buf, "%d.%06u\n", val, val2);
-	} else if (ret == IIO_VAL_INT_PLUS_NANO) {
+			return sprintf(buf, "%d.%06u%s\n", val, val2,
+				scale_db ? " dB" : "");
+	case IIO_VAL_INT_PLUS_NANO:
 		if (val2 < 0)
 			return sprintf(buf, "-%d.%09u\n", val, -val2);
 		else
 			return sprintf(buf, "%d.%09u\n", val, val2);
-	} else
+	default:
 		return 0;
+	}
 }
 
 static ssize_t iio_write_channel_info(struct device *dev,
@@ -331,7 +330,7 @@ static ssize_t iio_write_channel_info(struct device *dev,
 				      const char *buf,
 				      size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret, integer = 0, fract = 0, fract_mult = 100000;
 	bool integer_part = true, negative = false;
@@ -575,25 +574,12 @@ error_ret:
 static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
 					struct iio_chan_spec const *chan)
 {
-	int ret, i, attrcount = 0;
+	int ret, attrcount = 0;
+	int i;
 	const struct iio_chan_spec_ext_info *ext_info;
 
 	if (chan->channel < 0)
 		return 0;
-
-	ret = __iio_add_chan_devattr(iio_data_type_name[chan->processed_val],
-				     chan,
-				     &iio_read_channel_info,
-				     (chan->output ?
-				      &iio_write_channel_info : NULL),
-				     0,
-				     0,
-				     &indio_dev->dev,
-				     &indio_dev->channel_attr_list);
-	if (ret)
-		goto error_ret;
-	attrcount++;
-
 	for_each_set_bit(i, &chan->info_mask, sizeof(long)*8) {
 		ret = __iio_add_chan_devattr(iio_chan_info_postfix[i/2],
 					     chan,
@@ -652,7 +638,7 @@ static ssize_t iio_show_dev_name(struct device *dev,
 				 struct device_attribute *attr,
 				 char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	return sprintf(buf, "%s\n", indio_dev->name);
 }
 
@@ -738,7 +724,7 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev)
 
 static void iio_dev_release(struct device *device)
 {
-	struct iio_dev *indio_dev = container_of(device, struct iio_dev, dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(device);
 	cdev_del(&indio_dev->chrdev);
 	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
 		iio_device_unregister_trigger_consumer(indio_dev);
@@ -752,7 +738,7 @@ static struct device_type iio_dev_type = {
 	.release = iio_dev_release,
 };
 
-struct iio_dev *iio_allocate_device(int sizeof_priv)
+struct iio_dev *iio_device_alloc(int sizeof_priv)
 {
 	struct iio_dev *dev;
 	size_t alloc_size;
@@ -788,16 +774,16 @@ struct iio_dev *iio_allocate_device(int sizeof_priv)
 
 	return dev;
 }
-EXPORT_SYMBOL(iio_allocate_device);
+EXPORT_SYMBOL(iio_device_alloc);
 
-void iio_free_device(struct iio_dev *dev)
+void iio_device_free(struct iio_dev *dev)
 {
 	if (dev) {
 		ida_simple_remove(&iio_ida, dev->id);
 		kfree(dev);
 	}
 }
-EXPORT_SYMBOL(iio_free_device);
+EXPORT_SYMBOL(iio_device_free);
 
 /**
  * iio_chrdev_open() - chrdev file open for buffer access and ioctls
diff --git a/drivers/staging/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index 5fdf739e38f9..b49059de5d02 100644
--- a/drivers/staging/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -20,10 +20,10 @@
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 #include <linux/wait.h>
-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
-#include "sysfs.h"
-#include "events.h"
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 /**
  * struct iio_event_interface - chrdev interface for an event line
@@ -186,7 +186,7 @@ static ssize_t iio_ev_state_store(struct device *dev,
 				  const char *buf,
 				  size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
 	bool val;
@@ -205,7 +205,7 @@ static ssize_t iio_ev_state_show(struct device *dev,
 				 struct device_attribute *attr,
 				 char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int val = indio_dev->info->read_event_config(indio_dev,
 						     this_attr->address);
@@ -220,7 +220,7 @@ static ssize_t iio_ev_value_show(struct device *dev,
 				 struct device_attribute *attr,
 				 char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int val, ret;
 
@@ -237,7 +237,7 @@ static ssize_t iio_ev_value_store(struct device *dev,
 				  const char *buf,
 				  size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	unsigned long val;
 	int ret;
diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index 47ecadd4818d..0f582df75a19 100644
--- a/drivers/staging/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -15,11 +15,11 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 
-#include "iio.h"
-#include "trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "iio_core.h"
 #include "iio_core_trigger.h"
-#include "trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 
 /* RFC - Question of approach
  * Make the common case (single sensor single trigger)
@@ -310,7 +310,7 @@ static ssize_t iio_trigger_read_current(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 
 	if (indio_dev->trig)
 		return sprintf(buf, "%s\n", indio_dev->trig->name);
@@ -329,7 +329,7 @@ static ssize_t iio_trigger_write_current(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_trigger *oldtrig = indio_dev->trig;
 	struct iio_trigger *trig;
 	int ret;
@@ -360,9 +360,9 @@ static ssize_t iio_trigger_write_current(struct device *dev,
 	indio_dev->trig = trig;
 
 	if (oldtrig && indio_dev->trig != oldtrig)
-		iio_put_trigger(oldtrig);
+		iio_trigger_put(oldtrig);
 	if (indio_dev->trig)
-		iio_get_trigger(indio_dev->trig);
+		iio_trigger_get(indio_dev->trig);
 
 	return len;
 }
@@ -426,7 +426,7 @@ static void iio_trig_subirqunmask(struct irq_data *d)
 	trig->subirqs[d->irq - trig->subirq_base].enabled = true;
 }
 
-struct iio_trigger *iio_allocate_trigger(const char *fmt, ...)
+struct iio_trigger *iio_trigger_alloc(const char *fmt, ...)
 {
 	va_list vargs;
 	struct iio_trigger *trig;
@@ -472,14 +472,14 @@ struct iio_trigger *iio_allocate_trigger(const char *fmt, ...)
 	}
 	return trig;
 }
-EXPORT_SYMBOL(iio_allocate_trigger);
+EXPORT_SYMBOL(iio_trigger_alloc);
 
-void iio_free_trigger(struct iio_trigger *trig)
+void iio_trigger_free(struct iio_trigger *trig)
 {
 	if (trig)
 		put_device(&trig->dev);
 }
-EXPORT_SYMBOL(iio_free_trigger);
+EXPORT_SYMBOL(iio_trigger_free);
 
 void iio_device_register_trigger_consumer(struct iio_dev *indio_dev)
 {
@@ -491,7 +491,7 @@ void iio_device_unregister_trigger_consumer(struct iio_dev *indio_dev)
 {
 	/* Clean up and associated but not attached triggers references */
 	if (indio_dev->trig)
-		iio_put_trigger(indio_dev->trig);
+		iio_trigger_put(indio_dev->trig);
 }
 
 int iio_triggered_buffer_postenable(struct iio_dev *indio_dev)
diff --git a/drivers/staging/iio/inkern.c b/drivers/iio/inkern.c
index ef07a02bf542..922645893dc8 100644
--- a/drivers/staging/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -11,11 +11,11 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 
-#include "iio.h"
+#include <linux/iio/iio.h>
 #include "iio_core.h"
-#include "machine.h"
-#include "driver.h"
-#include "consumer.h"
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/consumer.h>
 
 struct iio_map_internal {
 	struct iio_dev *indio_dev;
diff --git a/drivers/staging/iio/kfifo_buf.c b/drivers/iio/kfifo_buf.c
index 9f3bd59c0e72..6bf9d05f4841 100644
--- a/drivers/staging/iio/kfifo_buf.c
+++ b/drivers/iio/kfifo_buf.c
@@ -5,8 +5,7 @@
 #include <linux/workqueue.h>
 #include <linux/kfifo.h>
 #include <linux/mutex.h>
-
-#include "kfifo_buf.h"
+#include <linux/iio/kfifo_buf.h>
 
 struct iio_kfifo {
 	struct iio_buffer buffer;
diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c
index 405febd94f24..daeeb4c7e3b0 100644
--- a/drivers/input/joystick/iforce/iforce-main.c
+++ b/drivers/input/joystick/iforce/iforce-main.c
@@ -317,7 +317,8 @@ int iforce_init_device(struct iforce *iforce)
 			break;
 
 	if (i == 20) { /* 5 seconds */
-		err("Timeout waiting for response from device.");
+		dev_err(&input_dev->dev,
+			"Timeout waiting for response from device.\n");
 		error = -ENODEV;
 		goto fail;
 	}
diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c
index a17b50016009..08f98f2eaf88 100644
--- a/drivers/input/joystick/iforce/iforce-packets.c
+++ b/drivers/input/joystick/iforce/iforce-packets.c
@@ -257,7 +257,8 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet)
 
 		status = usb_submit_urb(iforce->ctrl, GFP_ATOMIC);
 		if (status) {
-			err("usb_submit_urb failed %d", status);
+			dev_err(&iforce->intf->dev,
+				"usb_submit_urb failed %d\n", status);
 			return -1;
 		}
 
@@ -265,12 +266,14 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet)
 			iforce->ctrl->status != -EINPROGRESS, HZ);
 
 		if (iforce->ctrl->status) {
-			dbg("iforce->ctrl->status = %d", iforce->ctrl->status);
+			dev_dbg(&iforce->intf->dev,
+				"iforce->ctrl->status = %d\n",
+				iforce->ctrl->status);
 			usb_unlink_urb(iforce->ctrl);
 			return -1;
 		}
 #else
-		dbg("iforce_get_id_packet: iforce->bus = USB!");
+		printk(KERN_DEBUG "iforce_get_id_packet: iforce->bus = USB!\n");
 #endif
 		}
 		break;
@@ -289,12 +292,15 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet)
 			return -1;
 		}
 #else
-		err("iforce_get_id_packet: iforce->bus = SERIO!");
+		dev_err(&iforce->dev->dev,
+			"iforce_get_id_packet: iforce->bus = SERIO!\n");
 #endif
 		break;
 
 	default:
-		err("iforce_get_id_packet: iforce->bus = %d", iforce->bus);
+		dev_err(&iforce->dev->dev,
+			"iforce_get_id_packet: iforce->bus = %d\n",
+			iforce->bus);
 		break;
 	}
 
diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index 6c96631ae5d9..d96aa27dfcdc 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -64,7 +64,7 @@ void iforce_usb_xmit(struct iforce *iforce)
 
 	if ( (n=usb_submit_urb(iforce->out, GFP_ATOMIC)) ) {
 		clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
-		dev_warn(&iforce->dev->dev, "usb_submit_urb failed %d\n", n);
+		dev_warn(&iforce->intf->dev, "usb_submit_urb failed %d\n", n);
 	}
 
 	/* The IFORCE_XMIT_RUNNING bit is not cleared here. That's intended.
@@ -76,6 +76,7 @@ void iforce_usb_xmit(struct iforce *iforce)
 static void iforce_usb_irq(struct urb *urb)
 {
 	struct iforce *iforce = urb->context;
+	struct device *dev = &iforce->intf->dev;
 	int status;
 
 	switch (urb->status) {
@@ -86,11 +87,12 @@ static void iforce_usb_irq(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, urb->status);
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
 		return;
 	default:
-		dbg("%s - urb has status of: %d", __func__, urb->status);
+		dev_dbg(dev, "%s - urb has status of: %d\n",
+			__func__, urb->status);
 		goto exit;
 	}
 
@@ -100,8 +102,8 @@ static void iforce_usb_irq(struct urb *urb)
 exit:
 	status = usb_submit_urb (urb, GFP_ATOMIC);
 	if (status)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __func__, status);
+		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
+			__func__, status);
 }
 
 static void iforce_usb_out(struct urb *urb)
@@ -110,7 +112,8 @@ static void iforce_usb_out(struct urb *urb)
 
 	if (urb->status) {
 		clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
-		dbg("urb->status %d, exiting", urb->status);
+		dev_dbg(&iforce->intf->dev, "urb->status %d, exiting\n",
+			urb->status);
 		return;
 	}
 
@@ -155,6 +158,7 @@ static int iforce_usb_probe(struct usb_interface *intf,
 
 	iforce->bus = IFORCE_USB;
 	iforce->usbdev = dev;
+	iforce->intf = intf;
 
 	iforce->cr.bRequestType = USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_INTERFACE;
 	iforce->cr.wIndex = 0;
diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h
index 9f494b75848a..b1d7d9b0eb86 100644
--- a/drivers/input/joystick/iforce/iforce.h
+++ b/drivers/input/joystick/iforce/iforce.h
@@ -115,6 +115,7 @@ struct iforce {
 #endif
 #ifdef CONFIG_JOYSTICK_IFORCE_USB
 	struct usb_device *usbdev;	/* USB transfer */
+	struct usb_interface *intf;
 	struct urb *irq, *out, *ctrl;
 	struct usb_ctrlrequest cr;
 #endif
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index fd7a0d5bc94d..ee16fb67b7ae 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -252,6 +252,7 @@ MODULE_DEVICE_TABLE (usb, xpad_table);
 struct usb_xpad {
 	struct input_dev *dev;		/* input device interface */
 	struct usb_device *udev;	/* usb device */
+	struct usb_interface *intf;	/* usb interface */
 
 	int pad_present;
 
@@ -457,6 +458,7 @@ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned cha
 static void xpad_irq_in(struct urb *urb)
 {
 	struct usb_xpad *xpad = urb->context;
+	struct device *dev = &xpad->intf->dev;
 	int retval, status;
 
 	status = urb->status;
@@ -469,11 +471,11 @@ static void xpad_irq_in(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
 			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d",
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
 			__func__, status);
 		goto exit;
 	}
@@ -492,12 +494,15 @@ static void xpad_irq_in(struct urb *urb)
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __func__, retval);
+		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
 }
 
 static void xpad_bulk_out(struct urb *urb)
 {
+	struct usb_xpad *xpad = urb->context;
+	struct device *dev = &xpad->intf->dev;
+
 	switch (urb->status) {
 	case 0:
 		/* success */
@@ -506,16 +511,20 @@ static void xpad_bulk_out(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
 		break;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
 	}
 }
 
 #if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
 static void xpad_irq_out(struct urb *urb)
 {
+	struct usb_xpad *xpad = urb->context;
+	struct device *dev = &xpad->intf->dev;
 	int retval, status;
 
 	status = urb->status;
@@ -529,19 +538,21 @@ static void xpad_irq_out(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, status);
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
 		return;
 
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__, status);
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
 		goto exit;
 	}
 
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err("%s - usb_submit_urb failed with result %d",
-		    __func__, retval);
+		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
 }
 
 static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
@@ -654,7 +665,8 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect
 			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
 
 		default:
-			dbg("%s - rumble command sent to unsupported xpad type: %d",
+			dev_dbg(&xpad->dev->dev,
+				"%s - rumble command sent to unsupported xpad type: %d\n",
 				__func__, xpad->xtype);
 			return -1;
 		}
@@ -844,6 +856,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	}
 
 	xpad->udev = udev;
+	xpad->intf = intf;
 	xpad->mapping = xpad_device[i].mapping;
 	xpad->xtype = xpad_device[i].xtype;
 
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index ab860511f016..082684e7f390 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -327,7 +327,9 @@ static void cm109_submit_buzz_toggle(struct cm109_dev *dev)
 
 	error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
 	if (error)
-		err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error);
+		dev_err(&dev->intf->dev,
+			"%s: usb_submit_urb (urb_ctl) failed %d\n",
+			__func__, error);
 }
 
 /*
@@ -339,7 +341,7 @@ static void cm109_urb_irq_callback(struct urb *urb)
 	const int status = urb->status;
 	int error;
 
-	dev_dbg(&urb->dev->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
+	dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
 	     dev->irq_data->byte[0],
 	     dev->irq_data->byte[1],
 	     dev->irq_data->byte[2],
@@ -349,7 +351,7 @@ static void cm109_urb_irq_callback(struct urb *urb)
 	if (status) {
 		if (status == -ESHUTDOWN)
 			return;
-		err("%s: urb status %d", __func__, status);
+		dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status);
 	}
 
 	/* Special keys */
@@ -396,7 +398,8 @@ static void cm109_urb_irq_callback(struct urb *urb)
 
 		error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
 		if (error)
-			err("%s: usb_submit_urb (urb_ctl) failed %d",
+			dev_err(&dev->intf->dev,
+				"%s: usb_submit_urb (urb_ctl) failed %d\n",
 				__func__, error);
 	}
 
@@ -409,14 +412,14 @@ static void cm109_urb_ctl_callback(struct urb *urb)
 	const int status = urb->status;
 	int error;
 
-	dev_dbg(&urb->dev->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
+	dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
 	     dev->ctl_data->byte[0],
 	     dev->ctl_data->byte[1],
 	     dev->ctl_data->byte[2],
 	     dev->ctl_data->byte[3]);
 
 	if (status)
-		err("%s: urb status %d", __func__, status);
+		dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status);
 
 	spin_lock(&dev->ctl_submit_lock);
 
@@ -433,7 +436,8 @@ static void cm109_urb_ctl_callback(struct urb *urb)
 			dev->irq_urb_pending = 1;
 			error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC);
 			if (error)
-				err("%s: usb_submit_urb (urb_irq) failed %d",
+				dev_err(&dev->intf->dev,
+					"%s: usb_submit_urb (urb_irq) failed %d\n",
 					__func__, error);
 		}
 	}
@@ -476,7 +480,8 @@ static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
 				dev->ctl_data,
 				USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
 	if (error < 0 && error != -EINTR)
-		err("%s: usb_control_msg() failed %d", __func__, error);
+		dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n",
+			__func__, error);
 }
 
 static void cm109_stop_traffic(struct cm109_dev *dev)
@@ -518,8 +523,8 @@ static int cm109_input_open(struct input_dev *idev)
 
 	error = usb_autopm_get_interface(dev->intf);
 	if (error < 0) {
-		err("%s - cannot autoresume, result %d",
-		    __func__, error);
+		dev_err(&idev->dev, "%s - cannot autoresume, result %d\n",
+			__func__, error);
 		return error;
 	}
 
@@ -537,7 +542,8 @@ static int cm109_input_open(struct input_dev *idev)
 
 	error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
 	if (error)
-		err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error);
+		dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
+			__func__, error);
 	else
 		dev->open = 1;
 
@@ -573,7 +579,7 @@ static int cm109_input_ev(struct input_dev *idev, unsigned int type,
 {
 	struct cm109_dev *dev = input_get_drvdata(idev);
 
-	dev_dbg(&dev->udev->dev,
+	dev_dbg(&dev->intf->dev,
 		"input_ev: type=%u code=%u value=%d\n", type, code, value);
 
 	if (type != EV_SND)
@@ -710,7 +716,8 @@ static int cm109_usb_probe(struct usb_interface *intf,
 	pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
 	ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 	if (ret != USB_PKT_LEN)
-		err("invalid payload size %d, expected %d", ret, USB_PKT_LEN);
+		dev_err(&intf->dev, "invalid payload size %d, expected %d\n",
+			ret, USB_PKT_LEN);
 
 	/* initialise irq urb */
 	usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data,
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index d99151a8bf10..290fa5f97ded 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -157,7 +157,7 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
 	 * though so it's not too big a deal
 	 */
 	if (dev->data.pos >= dev->data.len) {
-		dev_dbg(&dev->udev->dev,
+		dev_dbg(&dev->interface->dev,
 			"%s - Error ran out of data. pos: %d, len: %d\n",
 			__func__, dev->data.pos, dev->data.len);
 		return -1;
@@ -267,7 +267,9 @@ static void keyspan_check_data(struct usb_keyspan *remote)
 				remote->data.tester = remote->data.tester >> 6;
 				remote->data.bits_left -= 6;
 			} else {
-				err("%s - Unknown sequence found in system data.\n", __func__);
+				dev_err(&remote->interface->dev,
+					"%s - Unknown sequence found in system data.\n",
+					__func__);
 				remote->stage = 0;
 				return;
 			}
@@ -286,7 +288,9 @@ static void keyspan_check_data(struct usb_keyspan *remote)
 				remote->data.tester = remote->data.tester >> 6;
 				remote->data.bits_left -= 6;
 			} else {
-				err("%s - Unknown sequence found in button data.\n", __func__);
+				dev_err(&remote->interface->dev,
+					"%s - Unknown sequence found in button data.\n",
+					__func__);
 				remote->stage = 0;
 				return;
 			}
@@ -302,7 +306,9 @@ static void keyspan_check_data(struct usb_keyspan *remote)
 			remote->data.tester = remote->data.tester >> 6;
 			remote->data.bits_left -= 6;
 		} else {
-			err("%s - Error in message, invalid toggle.\n", __func__);
+			dev_err(&remote->interface->dev,
+				"%s - Error in message, invalid toggle.\n",
+				__func__);
 			remote->stage = 0;
 			return;
 		}
@@ -312,10 +318,11 @@ static void keyspan_check_data(struct usb_keyspan *remote)
 			remote->data.tester = remote->data.tester >> 5;
 			remote->data.bits_left -= 5;
 		} else {
-			err("Bad message received, no stop bit found.\n");
+			dev_err(&remote->interface->dev,
+				"Bad message received, no stop bit found.\n");
 		}
 
-		dev_dbg(&remote->udev->dev,
+		dev_dbg(&remote->interface->dev,
 			"%s found valid message: system: %d, button: %d, toggle: %d\n",
 			__func__, message.system, message.button, message.toggle);
 
@@ -397,7 +404,9 @@ static void keyspan_irq_recv(struct urb *urb)
 resubmit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result: %d", __func__, retval);
+		dev_err(&dev->interface->dev,
+			"%s - usb_submit_urb failed with result: %d\n",
+			__func__, retval);
 }
 
 static int keyspan_open(struct input_dev *dev)
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index 538f7049ec64..49c0c3ebd321 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -65,6 +65,7 @@ struct powermate_device {
 	struct urb *irq, *config;
 	struct usb_ctrlrequest *configcr;
 	struct usb_device *udev;
+	struct usb_interface *intf;
 	struct input_dev *input;
 	spinlock_t lock;
 	int static_brightness;
@@ -85,6 +86,7 @@ static void powermate_config_complete(struct urb *urb);
 static void powermate_irq(struct urb *urb)
 {
 	struct powermate_device *pm = urb->context;
+	struct device *dev = &pm->intf->dev;
 	int retval;
 
 	switch (urb->status) {
@@ -95,10 +97,12 @@ static void powermate_irq(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
 		goto exit;
 	}
 
@@ -110,8 +114,8 @@ static void powermate_irq(struct urb *urb)
 exit:
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __func__, retval);
+		dev_err(dev, "%s - usb_submit_urb failed with result: %d\n",
+			__func__, retval);
 }
 
 /* Decide if we need to issue a control message and do so. Must be called with pm->lock taken */
@@ -330,6 +334,7 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
 		goto fail3;
 
 	pm->udev = udev;
+	pm->intf = intf;
 	pm->input = input_dev;
 
 	usb_make_path(udev, pm->phys, sizeof(pm->phys));
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index f4776e7f8c15..285a5bd6cbc9 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -101,6 +101,7 @@ static const struct lcd_segment_map {
 struct yealink_dev {
 	struct input_dev *idev;		/* input device */
 	struct usb_device *udev;	/* usb device */
+	struct usb_interface *intf;	/* usb interface */
 
 	/* irq input channel */
 	struct yld_ctl_packet	*irq_data;
@@ -428,7 +429,8 @@ static void urb_irq_callback(struct urb *urb)
 	int ret, status = urb->status;
 
 	if (status)
-		err("%s - urb status %d", __func__, status);
+		dev_err(&yld->intf->dev, "%s - urb status %d\n",
+			__func__, status);
 
 	switch (yld->irq_data->cmd) {
 	case CMD_KEYPRESS:
@@ -437,13 +439,15 @@ static void urb_irq_callback(struct urb *urb)
 		break;
 
 	case CMD_SCANCODE:
-		dbg("get scancode %x", yld->irq_data->data[0]);
+		dev_dbg(&yld->intf->dev, "get scancode %x\n",
+			yld->irq_data->data[0]);
 
 		report_key(yld, map_p1k_to_key(yld->irq_data->data[0]));
 		break;
 
 	default:
-		err("unexpected response %x", yld->irq_data->cmd);
+		dev_err(&yld->intf->dev, "unexpected response %x\n",
+			yld->irq_data->cmd);
 	}
 
 	yealink_do_idle_tasks(yld);
@@ -451,7 +455,9 @@ static void urb_irq_callback(struct urb *urb)
 	if (!yld->shutdown) {
 		ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
 		if (ret && ret != -EPERM)
-			err("%s - usb_submit_urb failed %d", __func__, ret);
+			dev_err(&yld->intf->dev,
+				"%s - usb_submit_urb failed %d\n",
+				__func__, ret);
 	}
 }
 
@@ -461,7 +467,8 @@ static void urb_ctl_callback(struct urb *urb)
 	int ret = 0, status = urb->status;
 
 	if (status)
-		err("%s - urb status %d", __func__, status);
+		dev_err(&yld->intf->dev, "%s - urb status %d\n",
+			__func__, status);
 
 	switch (yld->ctl_data->cmd) {
 	case CMD_KEYPRESS:
@@ -479,7 +486,8 @@ static void urb_ctl_callback(struct urb *urb)
 	}
 
 	if (ret && ret != -EPERM)
-		err("%s - usb_submit_urb failed %d", __func__, ret);
+		dev_err(&yld->intf->dev, "%s - usb_submit_urb failed %d\n",
+			__func__, ret);
 }
 
 /*******************************************************************************
@@ -511,7 +519,7 @@ static int input_open(struct input_dev *dev)
 	struct yealink_dev *yld = input_get_drvdata(dev);
 	int i, ret;
 
-	dbg("%s", __func__);
+	dev_dbg(&yld->intf->dev, "%s\n", __func__);
 
 	/* force updates to device */
 	for (i = 0; i<sizeof(yld->master); i++)
@@ -526,8 +534,9 @@ static int input_open(struct input_dev *dev)
 	yld->ctl_data->size	= 10;
 	yld->ctl_data->sum	= 0x100-CMD_INIT-10;
 	if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) {
-		dbg("%s - usb_submit_urb failed with result %d",
-		     __func__, ret);
+		dev_dbg(&yld->intf->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, ret);
 		return ret;
 	}
 	return 0;
@@ -876,6 +885,7 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		return -ENOMEM;
 
 	yld->udev = udev;
+	yld->intf = intf;
 
 	yld->idev = input_dev = input_allocate_device();
 	if (!input_dev)
@@ -909,7 +919,8 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
 	ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 	if (ret != USB_PKT_LEN)
-		err("invalid payload size %d, expected %zd", ret, USB_PKT_LEN);
+		dev_err(&intf->dev, "invalid payload size %d, expected %zd\n",
+			ret, USB_PKT_LEN);
 
 	/* initialise irq urb */
 	usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data,
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 0acbc7d50d05..e42f1fa8cdc0 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -195,6 +195,7 @@ enum atp_status_bits {
 struct atp {
 	char			phys[64];
 	struct usb_device	*udev;		/* usb device */
+	struct usb_interface	*intf;		/* usb interface */
 	struct urb		*urb;		/* usb request block */
 	u8			*data;		/* transferred data */
 	struct input_dev	*input;		/* input dev */
@@ -253,8 +254,9 @@ MODULE_PARM_DESC(debug, "Activate debugging output");
  * packets (Report ID 2). This code changes device mode, so it
  * sends raw sensor reports (Report ID 5).
  */
-static int atp_geyser_init(struct usb_device *udev)
+static int atp_geyser_init(struct atp *dev)
 {
+	struct usb_device *udev = dev->udev;
 	char *data;
 	int size;
 	int i;
@@ -262,7 +264,7 @@ static int atp_geyser_init(struct usb_device *udev)
 
 	data = kmalloc(8, GFP_KERNEL);
 	if (!data) {
-		err("Out of memory");
+		dev_err(&dev->intf->dev, "Out of memory\n");
 		return -ENOMEM;
 	}
 
@@ -277,7 +279,7 @@ static int atp_geyser_init(struct usb_device *udev)
 		for (i = 0; i < 8; i++)
 			dprintk("appletouch[%d]: %d\n", i, data[i]);
 
-		err("Failed to read mode from device.");
+		dev_err(&dev->intf->dev, "Failed to read mode from device.\n");
 		ret = -EIO;
 		goto out_free;
 	}
@@ -296,7 +298,7 @@ static int atp_geyser_init(struct usb_device *udev)
 		for (i = 0; i < 8; i++)
 			dprintk("appletouch[%d]: %d\n", i, data[i]);
 
-		err("Failed to request geyser raw mode");
+		dev_err(&dev->intf->dev, "Failed to request geyser raw mode\n");
 		ret = -EIO;
 		goto out_free;
 	}
@@ -313,16 +315,16 @@ out_free:
 static void atp_reinit(struct work_struct *work)
 {
 	struct atp *dev = container_of(work, struct atp, work);
-	struct usb_device *udev = dev->udev;
 	int retval;
 
 	dprintk("appletouch: putting appletouch to sleep (reinit)\n");
-	atp_geyser_init(udev);
+	atp_geyser_init(dev);
 
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
 	if (retval)
-		err("atp_reinit: usb_submit_urb failed with error %d",
-		    retval);
+		dev_err(&dev->intf->dev,
+			"atp_reinit: usb_submit_urb failed with error %d\n",
+			retval);
 }
 
 static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
@@ -400,6 +402,7 @@ static inline void atp_report_fingers(struct input_dev *input, int fingers)
 static int atp_status_check(struct urb *urb)
 {
 	struct atp *dev = urb->context;
+	struct usb_interface *intf = dev->intf;
 
 	switch (urb->status) {
 	case 0:
@@ -407,8 +410,8 @@ static int atp_status_check(struct urb *urb)
 		break;
 	case -EOVERFLOW:
 		if (!dev->overflow_warned) {
-			printk(KERN_WARNING "appletouch: OVERFLOW with data "
-				"length %d, actual length is %d\n",
+			dev_warn(&intf->dev,
+				"appletouch: OVERFLOW with data length %d, actual length is %d\n",
 				dev->info->datalen, dev->urb->actual_length);
 			dev->overflow_warned = true;
 		}
@@ -416,13 +419,15 @@ static int atp_status_check(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* This urb is terminated, clean up */
-		dbg("atp_complete: urb shutting down with status: %d",
-		    urb->status);
+		dev_dbg(&intf->dev,
+			"atp_complete: urb shutting down with status: %d\n",
+			urb->status);
 		return ATP_URB_STATUS_ERROR_FATAL;
 
 	default:
-		dbg("atp_complete: nonzero urb status received: %d",
-		    urb->status);
+		dev_dbg(&intf->dev,
+			"atp_complete: nonzero urb status received: %d\n",
+			urb->status);
 		return ATP_URB_STATUS_ERROR;
 	}
 
@@ -445,7 +450,8 @@ static void atp_detect_size(struct atp *dev)
 	for (i = dev->info->xsensors; i < ATP_XSENSORS; i++) {
 		if (dev->xy_cur[i]) {
 
-			printk(KERN_INFO "appletouch: 17\" model detected.\n");
+			dev_info(&dev->intf->dev,
+				"appletouch: 17\" model detected.\n");
 
 			input_set_abs_params(dev->input, ABS_X, 0,
 					     (dev->info->xsensors_17 - 1) *
@@ -588,8 +594,9 @@ static void atp_complete_geyser_1_2(struct urb *urb)
  exit:
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
 	if (retval)
-		err("atp_complete: usb_submit_urb failed with result %d",
-		    retval);
+		dev_err(&dev->intf->dev,
+			"atp_complete: usb_submit_urb failed with result %d\n",
+			retval);
 }
 
 /* Interrupt function for older touchpads: GEYSER3/GEYSER4 */
@@ -722,8 +729,9 @@ static void atp_complete_geyser_3_4(struct urb *urb)
  exit:
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
 	if (retval)
-		err("atp_complete: usb_submit_urb failed with result %d",
-		    retval);
+		dev_err(&dev->intf->dev,
+			"atp_complete: usb_submit_urb failed with result %d\n",
+			retval);
 }
 
 static int atp_open(struct input_dev *input)
@@ -748,14 +756,12 @@ static void atp_close(struct input_dev *input)
 
 static int atp_handle_geyser(struct atp *dev)
 {
-	struct usb_device *udev = dev->udev;
-
 	if (dev->info != &fountain_info) {
 		/* switch to raw sensor mode */
-		if (atp_geyser_init(udev))
+		if (atp_geyser_init(dev))
 			return -EIO;
 
-		printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
+		dev_info(&dev->intf->dev, "Geyser mode initialized.\n");
 	}
 
 	return 0;
@@ -785,7 +791,7 @@ static int atp_probe(struct usb_interface *iface,
 		}
 	}
 	if (!int_in_endpointAddr) {
-		err("Could not find int-in endpoint");
+		dev_err(&iface->dev, "Could not find int-in endpoint\n");
 		return -EIO;
 	}
 
@@ -793,11 +799,12 @@ static int atp_probe(struct usb_interface *iface,
 	dev = kzalloc(sizeof(struct atp), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!dev || !input_dev) {
-		err("Out of memory");
+		dev_err(&iface->dev, "Out of memory\n");
 		goto err_free_devs;
 	}
 
 	dev->udev = udev;
+	dev->intf = iface;
 	dev->input = input_dev;
 	dev->info = info;
 	dev->overflow_warned = false;
@@ -886,7 +893,7 @@ static void atp_disconnect(struct usb_interface *iface)
 		usb_free_urb(dev->urb);
 		kfree(dev);
 	}
-	printk(KERN_INFO "input: appletouch disconnected\n");
+	dev_info(&iface->dev, "input: appletouch disconnected\n");
 }
 
 static int atp_recover(struct atp *dev)
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index f9e2758b9f46..2cf681d98c0d 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -584,7 +584,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 	int retval = 0, size;
 
 	if (!data) {
-		err("bcm5974: out of memory");
+		dev_err(&dev->intf->dev, "out of memory\n");
 		retval = -ENOMEM;
 		goto out;
 	}
@@ -597,7 +597,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 			BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
 
 	if (size != 8) {
-		err("bcm5974: could not read from device");
+		dev_err(&dev->intf->dev, "could not read from device\n");
 		retval = -EIO;
 		goto out;
 	}
@@ -615,7 +615,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 			BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
 
 	if (size != 8) {
-		err("bcm5974: could not write to device");
+		dev_err(&dev->intf->dev, "could not write to device\n");
 		retval = -EIO;
 		goto out;
 	}
@@ -631,6 +631,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 static void bcm5974_irq_button(struct urb *urb)
 {
 	struct bcm5974 *dev = urb->context;
+	struct usb_interface *intf = dev->intf;
 	int error;
 
 	switch (urb->status) {
@@ -640,10 +641,11 @@ static void bcm5974_irq_button(struct urb *urb)
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
-		dbg("bcm5974: button urb shutting down: %d", urb->status);
+		dev_dbg(&intf->dev, "button urb shutting down: %d\n",
+			urb->status);
 		return;
 	default:
-		dbg("bcm5974: button urb status: %d", urb->status);
+		dev_dbg(&intf->dev, "button urb status: %d\n", urb->status);
 		goto exit;
 	}
 
@@ -654,12 +656,13 @@ static void bcm5974_irq_button(struct urb *urb)
 exit:
 	error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
 	if (error)
-		err("bcm5974: button urb failed: %d", error);
+		dev_err(&intf->dev, "button urb failed: %d\n", error);
 }
 
 static void bcm5974_irq_trackpad(struct urb *urb)
 {
 	struct bcm5974 *dev = urb->context;
+	struct usb_interface *intf = dev->intf;
 	int error;
 
 	switch (urb->status) {
@@ -669,10 +672,11 @@ static void bcm5974_irq_trackpad(struct urb *urb)
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
-		dbg("bcm5974: trackpad urb shutting down: %d", urb->status);
+		dev_dbg(&intf->dev, "trackpad urb shutting down: %d\n",
+			urb->status);
 		return;
 	default:
-		dbg("bcm5974: trackpad urb status: %d", urb->status);
+		dev_dbg(&intf->dev, "trackpad urb status: %d\n", urb->status);
 		goto exit;
 	}
 
@@ -687,7 +691,7 @@ static void bcm5974_irq_trackpad(struct urb *urb)
 exit:
 	error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
 	if (error)
-		err("bcm5974: trackpad urb failed: %d", error);
+		dev_err(&intf->dev, "trackpad urb failed: %d\n", error);
 }
 
 /*
@@ -833,7 +837,7 @@ static int bcm5974_probe(struct usb_interface *iface,
 	dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!dev || !input_dev) {
-		err("bcm5974: out of memory");
+		dev_err(&iface->dev, "out of memory\n");
 		goto err_free_devs;
 	}
 
diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
index f8b0b1df9138..e062ec899ca1 100644
--- a/drivers/input/tablet/acecad.c
+++ b/drivers/input/tablet/acecad.c
@@ -51,6 +51,7 @@ struct usb_acecad {
 	char name[128];
 	char phys[64];
 	struct usb_device *usbdev;
+	struct usb_interface *intf;
 	struct input_dev *input;
 	struct urb *irq;
 
@@ -63,6 +64,7 @@ static void usb_acecad_irq(struct urb *urb)
 	struct usb_acecad *acecad = urb->context;
 	unsigned char *data = acecad->data;
 	struct input_dev *dev = acecad->input;
+	struct usb_interface *intf = acecad->intf;
 	int prox, status;
 
 	switch (urb->status) {
@@ -73,10 +75,12 @@ static void usb_acecad_irq(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
+		dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
+		dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
 		goto resubmit;
 	}
 
@@ -105,8 +109,10 @@ static void usb_acecad_irq(struct urb *urb)
 resubmit:
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status)
-		err("can't resubmit intr, %s-%s/input0, status %d",
-			acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status);
+		dev_err(&intf->dev,
+			"can't resubmit intr, %s-%s/input0, status %d\n",
+			acecad->usbdev->bus->bus_name,
+			acecad->usbdev->devpath, status);
 }
 
 static int usb_acecad_open(struct input_dev *dev)
@@ -168,6 +174,7 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 	}
 
 	acecad->usbdev = dev;
+	acecad->intf = intf;
 	acecad->input = input_dev;
 
 	if (dev->manufacturer)
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 205d16aab441..755a39e4c9e9 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -309,6 +309,7 @@ struct aiptek_settings {
 struct aiptek {
 	struct input_dev *inputdev;		/* input device struct           */
 	struct usb_device *usbdev;		/* usb device struct             */
+	struct usb_interface *intf;		/* usb interface struct          */
 	struct urb *urb;			/* urb for incoming reports      */
 	dma_addr_t data_dma;			/* our dma stuffage              */
 	struct aiptek_features features;	/* tablet's array of features    */
@@ -435,6 +436,7 @@ static void aiptek_irq(struct urb *urb)
 	struct aiptek *aiptek = urb->context;
 	unsigned char *data = aiptek->data;
 	struct input_dev *inputdev = aiptek->inputdev;
+	struct usb_interface *intf = aiptek->intf;
 	int jitterable = 0;
 	int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
 
@@ -447,13 +449,13 @@ static void aiptek_irq(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* This urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, urb->status);
+		dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
 		return;
 
 	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __func__, urb->status);
+		dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
 		goto exit;
 	}
 
@@ -785,7 +787,7 @@ static void aiptek_irq(struct urb *urb)
 				 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
 		input_sync(inputdev);
 	} else {
-		dbg("Unknown report %d", data[0]);
+		dev_dbg(&intf->dev, "Unknown report %d\n", data[0]);
 	}
 
 	/* Jitter may occur when the user presses a button on the stlyus
@@ -811,8 +813,9 @@ static void aiptek_irq(struct urb *urb)
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval != 0) {
-		err("%s - usb_submit_urb failed with result %d",
-		    __func__, retval);
+		dev_err(&intf->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
 	}
 }
 
@@ -912,8 +915,9 @@ aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data)
 
 	if ((ret =
 	     aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
-		dbg("aiptek_program: failed, tried to send: 0x%02x 0x%02x",
-		    command, data);
+		dev_dbg(&aiptek->intf->dev,
+			"aiptek_program: failed, tried to send: 0x%02x 0x%02x\n",
+			command, data);
 	}
 	kfree(buf);
 	return ret < 0 ? ret : 0;
@@ -947,8 +951,9 @@ aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data)
 
 	if ((ret =
 	     aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
-		dbg("aiptek_query failed: returned 0x%02x 0x%02x 0x%02x",
-		    buf[0], buf[1], buf[2]);
+		dev_dbg(&aiptek->intf->dev,
+			"aiptek_query failed: returned 0x%02x 0x%02x 0x%02x\n",
+			buf[0], buf[1], buf[2]);
 		ret = -EIO;
 	} else {
 		ret = get_unaligned_le16(buf + 1);
@@ -1726,6 +1731,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	aiptek->inputdev = inputdev;
 	aiptek->usbdev = usbdev;
+	aiptek->intf = intf;
 	aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
 	aiptek->inDelay = 0;
 	aiptek->endDelay = 0;
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 89a297801dce..29e01ab6859f 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -2,8 +2,6 @@
 
 GTCO digitizer USB driver
 
-Use the err() and dbg() macros from usb.h for system logging
-
 TO CHECK:  Is pressure done right on report 5?
 
 Copyright (C) 2006  GTCO CalComp
@@ -108,6 +106,7 @@ struct gtco {
 
 	struct input_dev  *inputdevice; /* input device struct pointer  */
 	struct usb_device *usbdev; /* the usb device for this device */
+	struct usb_interface *intf;	/* the usb interface for this device */
 	struct urb        *urbinfo;	 /* urb for incoming reports      */
 	dma_addr_t        buf_dma;  /* dma addr of the data buffer*/
 	unsigned char *   buffer;   /* databuffer for reports */
@@ -202,6 +201,7 @@ struct hid_descriptor
 static void parse_hid_report_descriptor(struct gtco *device, char * report,
 					int length)
 {
+	struct device *ddev = &device->intf->dev;
 	int   x, i = 0;
 
 	/* Tag primitive vars */
@@ -228,7 +228,7 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
 	char  indentstr[10] = "";
 
 
-	dbg("======>>>>>>PARSE<<<<<<======");
+	dev_dbg(ddev, "======>>>>>>PARSE<<<<<<======\n");
 
 	/* Walk  this report and pull out the info we need */
 	while (i < length) {
@@ -277,11 +277,11 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
 				else if (data == 3)
 					strcpy(globtype, "Var|Const");
 
-				dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits",
-				    globalval[TAG_GLOB_REPORT_ID], inputnum,
-				    globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX],
-				    globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN],
-				    globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]);
+				dev_dbg(ddev, "::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits\n",
+					globalval[TAG_GLOB_REPORT_ID], inputnum,
+					globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX],
+					globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN],
+					globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]);
 
 
 				/*
@@ -292,7 +292,7 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
 				 */
 				switch (inputnum) {
 				case 0:  /* X coord */
-					dbg("GER: X Usage: 0x%x", usage);
+					dev_dbg(ddev, "GER: X Usage: 0x%x\n", usage);
 					if (device->max_X == 0) {
 						device->max_X = globalval[TAG_GLOB_LOG_MAX];
 						device->min_X = globalval[TAG_GLOB_LOG_MIN];
@@ -300,7 +300,7 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
 					break;
 
 				case 1:  /* Y coord */
-					dbg("GER: Y Usage: 0x%x", usage);
+					dev_dbg(ddev, "GER: Y Usage: 0x%x\n", usage);
 					if (device->max_Y == 0) {
 						device->max_Y = globalval[TAG_GLOB_LOG_MAX];
 						device->min_Y = globalval[TAG_GLOB_LOG_MIN];
@@ -350,10 +350,10 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
 				maintype = 'S';
 
 				if (data == 0) {
-					dbg("======>>>>>> Physical");
+					dev_dbg(ddev, "======>>>>>> Physical\n");
 					strcpy(globtype, "Physical");
 				} else
-					dbg("======>>>>>>");
+					dev_dbg(ddev, "======>>>>>>\n");
 
 				/* Indent the debug output */
 				indent++;
@@ -368,7 +368,7 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
 				break;
 
 			case TAG_MAIN_COL_END:
-				dbg("<<<<<<======");
+				dev_dbg(ddev, "<<<<<<======\n");
 				maintype = 'E';
 				indent--;
 				for (x = 0; x < indent; x++)
@@ -384,18 +384,18 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
 
 			switch (size) {
 			case 1:
-				dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
-				    indentstr, tag, maintype, size, globtype, data);
+				dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
+					indentstr, tag, maintype, size, globtype, data);
 				break;
 
 			case 2:
-				dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
-				    indentstr, tag, maintype, size, globtype, data16);
+				dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
+					indentstr, tag, maintype, size, globtype, data16);
 				break;
 
 			case 4:
-				dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
-				    indentstr, tag, maintype, size, globtype, data32);
+				dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
+					indentstr, tag, maintype, size, globtype, data32);
 				break;
 			}
 			break;
@@ -465,26 +465,26 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
 			if (tag < TAG_GLOB_MAX) {
 				switch (size) {
 				case 1:
-					dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
-					    indentstr, globtype, tag, size, data);
+					dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
+						indentstr, globtype, tag, size, data);
 					globalval[tag] = data;
 					break;
 
 				case 2:
-					dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
-					    indentstr, globtype, tag, size, data16);
+					dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
+						indentstr, globtype, tag, size, data16);
 					globalval[tag] = data16;
 					break;
 
 				case 4:
-					dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
-					    indentstr, globtype, tag, size, data32);
+					dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
+						indentstr, globtype, tag, size, data32);
 					globalval[tag] = data32;
 					break;
 				}
 			} else {
-				dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ",
-				    indentstr, tag, size);
+				dev_dbg(ddev, "%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d\n",
+					indentstr, tag, size);
 			}
 			break;
 
@@ -511,18 +511,18 @@ static void parse_hid_report_descriptor(struct gtco *device, char * report,
 
 			switch (size) {
 			case 1:
-				dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
-				    indentstr, tag, globtype, size, data);
+				dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
+					indentstr, tag, globtype, size, data);
 				break;
 
 			case 2:
-				dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
-				    indentstr, tag, globtype, size, data16);
+				dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
+					indentstr, tag, globtype, size, data16);
 				break;
 
 			case 4:
-				dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
-				    indentstr, tag, globtype, size, data32);
+				dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
+					indentstr, tag, globtype, size, data32);
 				break;
 			}
 
@@ -714,8 +714,9 @@ static void gtco_urb_callback(struct urb *urbinfo)
 				 * the rest as 0
 				 */
 				val = device->buffer[5] & MASK_BUTTON;
-				dbg("======>>>>>>REPORT 1: val 0x%X(%d)",
-				    val, val);
+				dev_dbg(&device->intf->dev,
+					"======>>>>>>REPORT 1: val 0x%X(%d)\n",
+					val, val);
 
 				/*
 				 * We don't apply any meaning to the button
@@ -808,7 +809,8 @@ static void gtco_urb_callback(struct urb *urbinfo)
  resubmit:
 	rc = usb_submit_urb(urbinfo, GFP_ATOMIC);
 	if (rc != 0)
-		err("usb_submit_urb failed rc=0x%x", rc);
+		dev_err(&device->intf->dev,
+			"usb_submit_urb failed rc=0x%x\n", rc);
 }
 
 /*
@@ -838,7 +840,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!gtco || !input_dev) {
-		err("No more memory");
+		dev_err(&usbinterface->dev, "No more memory\n");
 		error = -ENOMEM;
 		goto err_free_devs;
 	}
@@ -848,12 +850,13 @@ static int gtco_probe(struct usb_interface *usbinterface,
 
 	/* Save interface information */
 	gtco->usbdev = usb_get_dev(interface_to_usbdev(usbinterface));
+	gtco->intf = usbinterface;
 
 	/* Allocate some data for incoming reports */
 	gtco->buffer = usb_alloc_coherent(gtco->usbdev, REPORT_MAX_SIZE,
 					  GFP_KERNEL, &gtco->buf_dma);
 	if (!gtco->buffer) {
-		err("No more memory for us buffers");
+		dev_err(&usbinterface->dev, "No more memory for us buffers\n");
 		error = -ENOMEM;
 		goto err_free_devs;
 	}
@@ -861,7 +864,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	/* Allocate URB for reports */
 	gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL);
 	if (!gtco->urbinfo) {
-		err("Failed to allocate URB");
+		dev_err(&usbinterface->dev, "Failed to allocate URB\n");
 		error = -ENOMEM;
 		goto err_free_buf;
 	}
@@ -873,14 +876,14 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
 
 	/* Some debug */
-	dbg("gtco # interfaces: %d", usbinterface->num_altsetting);
-	dbg("num endpoints:     %d", usbinterface->cur_altsetting->desc.bNumEndpoints);
-	dbg("interface class:   %d", usbinterface->cur_altsetting->desc.bInterfaceClass);
-	dbg("endpoint: attribute:0x%x type:0x%x", endpoint->bmAttributes, endpoint->bDescriptorType);
+	dev_dbg(&usbinterface->dev, "gtco # interfaces: %d\n", usbinterface->num_altsetting);
+	dev_dbg(&usbinterface->dev, "num endpoints:     %d\n", usbinterface->cur_altsetting->desc.bNumEndpoints);
+	dev_dbg(&usbinterface->dev, "interface class:   %d\n", usbinterface->cur_altsetting->desc.bInterfaceClass);
+	dev_dbg(&usbinterface->dev, "endpoint: attribute:0x%x type:0x%x\n", endpoint->bmAttributes, endpoint->bDescriptorType);
 	if (usb_endpoint_xfer_int(endpoint))
-		dbg("endpoint: we have interrupt endpoint\n");
+		dev_dbg(&usbinterface->dev, "endpoint: we have interrupt endpoint\n");
 
-	dbg("endpoint extra len:%d ", usbinterface->altsetting[0].extralen);
+	dev_dbg(&usbinterface->dev, "endpoint extra len:%d\n", usbinterface->altsetting[0].extralen);
 
 	/*
 	 * Find the HID descriptor so we can find out the size of the
@@ -888,17 +891,19 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	 */
 	if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
 				     HID_DEVICE_TYPE, &hid_desc) != 0){
-		err("Can't retrieve exta USB descriptor to get hid report descriptor length");
+		dev_err(&usbinterface->dev,
+			"Can't retrieve exta USB descriptor to get hid report descriptor length\n");
 		error = -EIO;
 		goto err_free_urb;
 	}
 
-	dbg("Extra descriptor success: type:%d  len:%d",
-	    hid_desc->bDescriptorType,  hid_desc->wDescriptorLength);
+	dev_dbg(&usbinterface->dev,
+		"Extra descriptor success: type:%d  len:%d\n",
+		hid_desc->bDescriptorType,  hid_desc->wDescriptorLength);
 
 	report = kzalloc(le16_to_cpu(hid_desc->wDescriptorLength), GFP_KERNEL);
 	if (!report) {
-		err("No more memory for report");
+		dev_err(&usbinterface->dev, "No more memory for report\n");
 		error = -ENOMEM;
 		goto err_free_urb;
 	}
@@ -915,7 +920,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
 					 le16_to_cpu(hid_desc->wDescriptorLength),
 					 5000); /* 5 secs */
 
-		dbg("usb_control_msg result: %d", result);
+		dev_dbg(&usbinterface->dev, "usb_control_msg result: %d\n", result);
 		if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
 			parse_hid_report_descriptor(gtco, report, result);
 			break;
@@ -926,8 +931,9 @@ static int gtco_probe(struct usb_interface *usbinterface,
 
 	/* If we didn't get the report, fail */
 	if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
-		err("Failed to get HID Report Descriptor of size: %d",
-		    hid_desc->wDescriptorLength);
+		dev_err(&usbinterface->dev,
+			"Failed to get HID Report Descriptor of size: %d\n",
+			hid_desc->wDescriptorLength);
 		error = -EIO;
 		goto err_free_urb;
 	}
diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c
index 85a5b40333ac..3fba74b9b602 100644
--- a/drivers/input/tablet/kbtab.c
+++ b/drivers/input/tablet/kbtab.c
@@ -33,6 +33,7 @@ struct kbtab {
 	dma_addr_t data_dma;
 	struct input_dev *dev;
 	struct usb_device *usbdev;
+	struct usb_interface *intf;
 	struct urb *irq;
 	char phys[32];
 };
@@ -53,10 +54,14 @@ static void kbtab_irq(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
+		dev_dbg(&kbtab->intf->dev,
+			"%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
+		dev_dbg(&kbtab->intf->dev,
+			"%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
 		goto exit;
 	}
 
@@ -80,8 +85,9 @@ static void kbtab_irq(struct urb *urb)
  exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err("%s - usb_submit_urb failed with result %d",
-		     __func__, retval);
+		dev_err(&kbtab->intf->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
 }
 
 static struct usb_device_id kbtab_ids[] = {
@@ -131,6 +137,7 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 		goto fail2;
 
 	kbtab->usbdev = dev;
+	kbtab->intf = intf;
 	kbtab->dev = input_dev;
 
 	usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys));
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 0d269212931e..79a0509882d4 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -99,6 +99,7 @@ static int wacom_set_report(struct usb_interface *intf, u8 type, u8 id,
 static void wacom_sys_irq(struct urb *urb)
 {
 	struct wacom *wacom = urb->context;
+	struct device *dev = &wacom->intf->dev;
 	int retval;
 
 	switch (urb->status) {
@@ -109,10 +110,12 @@ static void wacom_sys_irq(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
 		goto exit;
 	}
 
@@ -122,8 +125,8 @@ static void wacom_sys_irq(struct urb *urb)
 	usb_mark_last_busy(wacom->usbdev);
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __func__, retval);
+		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
 }
 
 static int wacom_open(struct input_dev *dev)
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index cecd35c8f0b3..b327790e9a0c 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -76,7 +76,8 @@ static int wacom_pl_irq(struct wacom_wac *wacom)
 	int prox, pressure;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
-		dbg("wacom_pl_irq: received unknown report #%d", data[0]);
+		dev_dbg(&input->dev,
+			"wacom_pl_irq: received unknown report #%d\n", data[0]);
 		return 0;
 	}
 
@@ -175,7 +176,7 @@ static int wacom_dtu_irq(struct wacom_wac *wacom)
 	struct input_dev *input = wacom->input;
 	int prox = data[1] & 0x20, pressure;
 
-	dbg("wacom_dtu_irq: received report #%d", data[0]);
+	dev_dbg(&input->dev, "wacom_dtu_irq: received report #%d\n", data[0]);
 
 	if (prox) {
 		/* Going into proximity select tool */
@@ -211,7 +212,9 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
 	int retval = 0;
 
 	if (data[0] != WACOM_REPORT_PENABLED) {
-		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
+		dev_dbg(&input->dev,
+			"wacom_graphire_irq: received unknown report #%d\n",
+			data[0]);
 		goto exit;
 	}
 
@@ -484,7 +487,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 
 	if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_INTUOSREAD
 		&& data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD) {
-		dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
+		dev_dbg(&input->dev,
+			"wacom_intuos_irq: received unknown report #%d\n",
+			data[0]);
                 return 0;
 	}
 
@@ -830,7 +835,8 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 {
 	char *data = wacom->data;
 
-	dbg("wacom_tpc_irq: received report #%d", data[0]);
+	dev_dbg(&wacom->input->dev, "wacom_tpc_irq: received report #%d\n",
+		data[0]);
 
 	switch (len) {
 	case WACOM_PKGLEN_TPC1FG:
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 22cd96f58c99..e32709e0dd65 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -269,8 +269,9 @@ static int e2i_init(struct usbtouch_usb *usbtouch)
 	                      0x01, 0x02, 0x0000, 0x0081,
 	                      NULL, 0, USB_CTRL_SET_TIMEOUT);
 
-	dbg("%s - usb_control_msg - E2I_RESET - bytes|err: %d",
-	    __func__, ret);
+	dev_dbg(&usbtouch->interface->dev,
+		"%s - usb_control_msg - E2I_RESET - bytes|err: %d\n",
+		__func__, ret);
 	return ret;
 }
 
@@ -425,8 +426,9 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 	                      MTOUCHUSB_RESET,
 	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 	                      1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
-	dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
-	    __func__, ret);
+	dev_dbg(&usbtouch->interface->dev,
+		"%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d\n",
+		__func__, ret);
 	if (ret < 0)
 		return ret;
 	msleep(150);
@@ -436,8 +438,9 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 				      MTOUCHUSB_ASYNC_REPORT,
 				      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				      1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
-		dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
-		    __func__, ret);
+		dev_dbg(&usbtouch->interface->dev,
+			"%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d\n",
+			__func__, ret);
 		if (ret >= 0)
 			break;
 		if (ret != -EPIPE)
@@ -737,27 +740,29 @@ static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 #ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
 static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
+	struct usb_interface *intf = dev->interface;
+
 	switch (pkt[0]) {
 	case 0x3A: /* command response */
-		dbg("%s: Command response %d", __func__, pkt[1]);
+		dev_dbg(&intf->dev, "%s: Command response %d\n", __func__, pkt[1]);
 		break;
 
 	case 0xC0: /* down */
 		dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
 		dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
 		dev->touch = 1;
-		dbg("%s: down %d,%d", __func__, dev->x, dev->y);
+		dev_dbg(&intf->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y);
 		return 1;
 
 	case 0x80: /* up */
 		dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
 		dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
 		dev->touch = 0;
-		dbg("%s: up %d,%d", __func__, dev->x, dev->y);
+		dev_dbg(&intf->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y);
 		return 1;
 
 	default:
-		dbg("%s: Unknown return %d", __func__, pkt[0]);
+		dev_dbg(&intf->dev, "%s: Unknown return %d\n", __func__, pkt[0]);
 		break;
 	}
 
@@ -812,7 +817,8 @@ static int nexio_alloc(struct usbtouch_usb *usbtouch)
 
 	priv->ack = usb_alloc_urb(0, GFP_KERNEL);
 	if (!priv->ack) {
-		dbg("%s - usb_alloc_urb failed: usbtouch->ack", __func__);
+		dev_dbg(&usbtouch->interface->dev,
+			"%s - usb_alloc_urb failed: usbtouch->ack\n", __func__);
 		goto err_ack_buf;
 	}
 
@@ -1349,6 +1355,7 @@ out_flush_buf:
 static void usbtouch_irq(struct urb *urb)
 {
 	struct usbtouch_usb *usbtouch = urb->context;
+	struct device *dev = &usbtouch->interface->dev;
 	int retval;
 
 	switch (urb->status) {
@@ -1357,20 +1364,21 @@ static void usbtouch_irq(struct urb *urb)
 		break;
 	case -ETIME:
 		/* this urb is timing out */
-		dbg("%s - urb timed out - was the device unplugged?",
-		    __func__);
+		dev_dbg(dev,
+			"%s - urb timed out - was the device unplugged?\n",
+			__func__);
 		return;
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
 	case -EPIPE:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, urb->status);
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __func__, urb->status);
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
 		goto exit;
 	}
 
@@ -1380,8 +1388,8 @@ exit:
 	usb_mark_last_busy(interface_to_usbdev(usbtouch->interface));
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err("%s - usb_submit_urb failed with result: %d",
-		    __func__, retval);
+		dev_err(dev, "%s - usb_submit_urb failed with result: %d\n",
+			__func__, retval);
 }
 
 static int usbtouch_open(struct input_dev *input)
@@ -1456,8 +1464,9 @@ static int usbtouch_reset_resume(struct usb_interface *intf)
 	if (usbtouch->type->init) {
 		err = usbtouch->type->init(usbtouch);
 		if (err) {
-			dbg("%s - type->init() failed, err: %d",
-			    __func__, err);
+			dev_dbg(&intf->dev,
+				"%s - type->init() failed, err: %d\n",
+				__func__, err);
 			return err;
 		}
 	}
@@ -1532,7 +1541,8 @@ static int usbtouch_probe(struct usb_interface *intf,
 
 	usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
 	if (!usbtouch->irq) {
-		dbg("%s - usb_alloc_urb failed: usbtouch->irq", __func__);
+		dev_dbg(&intf->dev,
+			"%s - usb_alloc_urb failed: usbtouch->irq\n", __func__);
 		goto out_free_buffers;
 	}
 
@@ -1594,7 +1604,9 @@ static int usbtouch_probe(struct usb_interface *intf,
 	if (type->alloc) {
 		err = type->alloc(usbtouch);
 		if (err) {
-			dbg("%s - type->alloc() failed, err: %d", __func__, err);
+			dev_dbg(&intf->dev,
+				"%s - type->alloc() failed, err: %d\n",
+				__func__, err);
 			goto out_free_urb;
 		}
 	}
@@ -1603,14 +1615,18 @@ static int usbtouch_probe(struct usb_interface *intf,
 	if (type->init) {
 		err = type->init(usbtouch);
 		if (err) {
-			dbg("%s - type->init() failed, err: %d", __func__, err);
+			dev_dbg(&intf->dev,
+				"%s - type->init() failed, err: %d\n",
+				__func__, err);
 			goto out_do_exit;
 		}
 	}
 
 	err = input_register_device(usbtouch->input);
 	if (err) {
-		dbg("%s - input_register_device failed, err: %d", __func__, err);
+		dev_dbg(&intf->dev,
+			"%s - input_register_device failed, err: %d\n",
+			__func__, err);
 		goto out_do_exit;
 	}
 
@@ -1622,8 +1638,9 @@ static int usbtouch_probe(struct usb_interface *intf,
 		err = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
 		if (err) {
 			usb_autopm_put_interface(intf);
-			err("%s - usb_submit_urb failed with result: %d",
-			    __func__, err);
+			dev_err(&intf->dev,
+				"%s - usb_submit_urb failed with result: %d\n",
+				__func__, err);
 			goto out_unregister_input;
 		}
 	}
@@ -1650,12 +1667,12 @@ static void usbtouch_disconnect(struct usb_interface *intf)
 {
 	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
 
-	dbg("%s - called", __func__);
-
 	if (!usbtouch)
 		return;
 
-	dbg("%s - usbtouch is initialized, cleaning up", __func__);
+	dev_dbg(&intf->dev,
+		"%s - usbtouch is initialized, cleaning up\n", __func__);
+
 	usb_set_intfdata(intf, NULL);
 	/* this will stop IO via close */
 	input_unregister_device(usbtouch->input);
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 3bd9fff5c589..c69843742bb0 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -43,7 +43,7 @@ config AMD_IOMMU
 	  With this option you can enable support for AMD IOMMU hardware in
 	  your system. An IOMMU is a hardware component which provides
 	  remapping of DMA memory accesses from devices. With an AMD IOMMU you
-	  can isolate the the DMA memory of different devices and protect the
+	  can isolate the DMA memory of different devices and protect the
 	  system from misbehaving device drivers or hardware.
 
 	  You can find out if your system has an AMD IOMMU if you look into
@@ -67,7 +67,7 @@ config AMD_IOMMU_V2
 	---help---
 	  This option enables support for the AMD IOMMUv2 features of the IOMMU
 	  hardware. Select this option if you want to use devices that support
-	  the the PCI PRI and PASID interface.
+	  the PCI PRI and PASID interface.
 
 # Intel IOMMU support
 config DMAR_TABLE
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 3b9278b333ba..527588708948 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -148,6 +148,7 @@ static struct usb_driver gigaset_usb_driver = {
 	.reset_resume =	gigaset_post_reset,
 	.pre_reset =	gigaset_pre_reset,
 	.post_reset =	gigaset_post_reset,
+	.disable_hub_initiated_lpm = 1,
 };
 
 /* get message text for usb_submit_urb return code
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index bb12d8051732..d0a41cb0cf62 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -124,6 +124,7 @@ static struct usb_driver gigaset_usb_driver = {
 	.reset_resume =	gigaset_resume,
 	.pre_reset =	gigaset_pre_reset,
 	.post_reset =	gigaset_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 struct usb_cardstate {
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 83206e453d4e..c65c3440cd70 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -2126,6 +2126,7 @@ static struct usb_driver hfcsusb_drv = {
 	.id_table = hfcsusb_idtab,
 	.probe = hfcsusb_probe,
 	.disconnect = hfcsusb_disconnect,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(hfcsusb_drv);
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 62c65bdefd8a..84f9c8103078 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -1568,6 +1568,7 @@ static struct usb_driver hfc_drv = {
 	.id_table = hfcusb_idtab,
 	.probe = hfc_usb_probe,
 	.disconnect = hfc_usb_disconnect,
+	.disable_hub_initiated_lpm = 1,
 };
 
 static void __exit
diff --git a/drivers/isdn/hisax/st5481_init.c b/drivers/isdn/hisax/st5481_init.c
index 100296e20dc0..54ef9e4f8cbc 100644
--- a/drivers/isdn/hisax/st5481_init.c
+++ b/drivers/isdn/hisax/st5481_init.c
@@ -182,6 +182,7 @@ static struct usb_driver st5481_usb_driver = {
 	.probe =	probe_st5481,
 	.disconnect =	disconnect_st5481,
 	.id_table =	st5481_ids,
+	.disable_hub_initiated_lpm = 1,
 };
 
 static int __init st5481_usb_init(void)
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index d9f5524593fb..8c610fa6782b 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -46,7 +46,6 @@ static DEFINE_MUTEX(isdn_mutex);
 static char *isdn_revision = "$Revision: 1.1.2.3 $";
 
 extern char *isdn_net_revision;
-extern char *isdn_tty_revision;
 #ifdef CONFIG_ISDN_PPP
 extern char *isdn_ppp_revision;
 #else
@@ -2327,8 +2326,6 @@ static int __init isdn_init(void)
 		dev->chanmap[i] = -1;
 		dev->m_idx[i] = -1;
 		strcpy(dev->num[i], "???");
-		init_waitqueue_head(&dev->mdm.info[i].open_wait);
-		init_waitqueue_head(&dev->mdm.info[i].close_wait);
 	}
 	if (register_chrdev(ISDN_MAJOR, "isdn", &isdn_fops)) {
 		printk(KERN_WARNING "isdn: Could not register control devices\n");
@@ -2353,8 +2350,6 @@ static int __init isdn_init(void)
 
 	strcpy(tmprev, isdn_revision);
 	printk(KERN_NOTICE "ISDN subsystem Rev: %s/", isdn_getrev(tmprev));
-	strcpy(tmprev, isdn_tty_revision);
-	printk("%s/", isdn_getrev(tmprev));
 	strcpy(tmprev, isdn_net_revision);
 	printk("%s/", isdn_getrev(tmprev));
 	strcpy(tmprev, isdn_ppp_revision);
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3831abdbc66f..7bc50670d7d9 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1,5 +1,4 @@
-/* $Id: isdn_tty.c,v 1.1.2.3 2004/02/10 01:07:13 keil Exp $
- *
+/*
  * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel).
  *
  * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
@@ -12,6 +11,7 @@
 #undef ISDN_TTY_STAT_DEBUG
 
 #include <linux/isdn.h>
+#include <linux/serial.h> /* ASYNC_* flags */
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
@@ -48,9 +48,6 @@ static int bit2si[8] =
 static int si2bit[8] =
 {4, 1, 4, 4, 4, 4, 4, 4};
 
-char *isdn_tty_revision = "$Revision: 1.1.2.3 $";
-
-
 /* isdn_tty_try_read() is called from within isdn_tty_rcv_skb()
  * to stuff incoming data directly into a tty's flip-buffer. This
  * is done to speed up tty-receiving if the receive-queue is empty.
@@ -68,49 +65,54 @@ isdn_tty_try_read(modem_info *info, struct sk_buff *skb)
 	struct tty_struct *tty;
 	char last;
 
-	if (info->online) {
-		if ((tty = info->tty)) {
-			if (info->mcr & UART_MCR_RTS) {
-				len = skb->len
+	if (!info->online)
+		return 0;
+
+	tty = info->port.tty;
+	if (!tty)
+		return 0;
+
+	if (!(info->mcr & UART_MCR_RTS))
+		return 0;
+
+	len = skb->len
 #ifdef CONFIG_ISDN_AUDIO
-					+ ISDN_AUDIO_SKB_DLECOUNT(skb)
+		+ ISDN_AUDIO_SKB_DLECOUNT(skb)
 #endif
-					;
+		;
+
+	c = tty_buffer_request_room(tty, len);
+	if (c < len)
+		return 0;
 
-				c = tty_buffer_request_room(tty, len);
-				if (c >= len) {
-#ifdef CONFIG_ISDN_AUDIO
-					if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
-						int l = skb->len;
-						unsigned char *dp = skb->data;
-						while (--l) {
-							if (*dp == DLE)
-								tty_insert_flip_char(tty, DLE, 0);
-							tty_insert_flip_char(tty, *dp++, 0);
-						}
-						if (*dp == DLE)
-							tty_insert_flip_char(tty, DLE, 0);
-						last = *dp;
-					} else {
-#endif
-						if (len > 1)
-							tty_insert_flip_string(tty, skb->data, len - 1);
-						last = skb->data[len - 1];
 #ifdef CONFIG_ISDN_AUDIO
-					}
+	if (ISDN_AUDIO_SKB_DLECOUNT(skb)) {
+		int l = skb->len;
+		unsigned char *dp = skb->data;
+		while (--l) {
+			if (*dp == DLE)
+				tty_insert_flip_char(tty, DLE, 0);
+			tty_insert_flip_char(tty, *dp++, 0);
+		}
+		if (*dp == DLE)
+			tty_insert_flip_char(tty, DLE, 0);
+		last = *dp;
+	} else {
 #endif
-					if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
-						tty_insert_flip_char(tty, last, 0xFF);
-					else
-						tty_insert_flip_char(tty, last, TTY_NORMAL);
-					tty_flip_buffer_push(tty);
-					kfree_skb(skb);
-					return 1;
-				}
-			}
-		}
+		if (len > 1)
+			tty_insert_flip_string(tty, skb->data, len - 1);
+		last = skb->data[len - 1];
+#ifdef CONFIG_ISDN_AUDIO
 	}
-	return 0;
+#endif
+	if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP)
+		tty_insert_flip_char(tty, last, 0xFF);
+	else
+		tty_insert_flip_char(tty, last, TTY_NORMAL);
+	tty_flip_buffer_push(tty);
+	kfree_skb(skb);
+
+	return 1;
 }
 
 /* isdn_tty_readmodem() is called periodically from within timer-interrupt.
@@ -128,35 +130,39 @@ isdn_tty_readmodem(void)
 	modem_info *info;
 
 	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
-		if ((midx = dev->m_idx[i]) >= 0) {
-			info = &dev->mdm.info[midx];
-			if (info->online) {
-				r = 0;
+		midx = dev->m_idx[i];
+		if (midx < 0)
+			continue;
+
+		info = &dev->mdm.info[midx];
+		if (!info->online)
+			continue;
+
+		r = 0;
 #ifdef CONFIG_ISDN_AUDIO
-				isdn_audio_eval_dtmf(info);
-				if ((info->vonline & 1) && (info->emu.vpar[1]))
-					isdn_audio_eval_silence(info);
-#endif
-				if ((tty = info->tty)) {
-					if (info->mcr & UART_MCR_RTS) {
-						/* CISCO AsyncPPP Hack */
-						if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
-							r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
-						else
-							r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
-						if (r)
-							tty_flip_buffer_push(tty);
-					} else
-						r = 1;
-				} else
-					r = 1;
-				if (r) {
-					info->rcvsched = 0;
-					resched = 1;
-				} else
-					info->rcvsched = 1;
-			}
-		}
+		isdn_audio_eval_dtmf(info);
+		if ((info->vonline & 1) && (info->emu.vpar[1]))
+			isdn_audio_eval_silence(info);
+#endif
+		tty = info->port.tty;
+		if (tty) {
+			if (info->mcr & UART_MCR_RTS) {
+				/* CISCO AsyncPPP Hack */
+				if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP))
+					r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 0);
+				else
+					r = isdn_readbchan_tty(info->isdn_driver, info->isdn_channel, tty, 1);
+				if (r)
+					tty_flip_buffer_push(tty);
+			} else
+				r = 1;
+		} else
+			r = 1;
+		if (r) {
+			info->rcvsched = 0;
+			resched = 1;
+		} else
+			info->rcvsched = 1;
 	}
 	if (!resched)
 		isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0);
@@ -294,7 +300,7 @@ isdn_tty_tint(modem_info *info)
 	len = skb->len;
 	if ((slen = isdn_writebuf_skb_stub(info->isdn_driver,
 					   info->isdn_channel, 1, skb)) == len) {
-		struct tty_struct *tty = info->tty;
+		struct tty_struct *tty = info->port.tty;
 		info->send_outstanding++;
 		info->msr &= ~UART_MSR_CTS;
 		info->lsr &= ~UART_LSR_TEMT;
@@ -327,7 +333,7 @@ isdn_tty_countDLE(unsigned char *buf, int len)
 static int
 isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len)
 {
-	unsigned char *p = &info->xmit_buf[info->xmit_count];
+	unsigned char *p = &info->port.xmit_buf[info->xmit_count];
 	int count = 0;
 
 	while (len > 0) {
@@ -471,7 +477,7 @@ isdn_tty_senddown(modem_info *info)
 		return;
 	}
 	skb_reserve(skb, skb_res);
-	memcpy(skb_put(skb, buflen), info->xmit_buf, buflen);
+	memcpy(skb_put(skb, buflen), info->port.xmit_buf, buflen);
 	info->xmit_count = 0;
 #ifdef CONFIG_ISDN_AUDIO
 	if (info->vonline & 2) {
@@ -699,7 +705,7 @@ isdn_tty_modem_hup(modem_info *info, int local)
 	printk(KERN_DEBUG "Mhup ttyI%d\n", info->line);
 #endif
 	info->rcvsched = 0;
-	isdn_tty_flush_buffer(info->tty);
+	isdn_tty_flush_buffer(info->port.tty);
 	if (info->online) {
 		info->last_lhup = local;
 		info->online = 0;
@@ -997,20 +1003,21 @@ isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine)
 static void
 isdn_tty_change_speed(modem_info *info)
 {
+	struct tty_port *port = &info->port;
 	uint cflag,
 		cval,
 		quot;
 	int i;
 
-	if (!info->tty || !info->tty->termios)
+	if (!port->tty || !port->tty->termios)
 		return;
-	cflag = info->tty->termios->c_cflag;
+	cflag = port->tty->termios->c_cflag;
 
 	quot = i = cflag & CBAUD;
 	if (i & CBAUDEX) {
 		i &= ~CBAUDEX;
 		if (i < 1 || i > 2)
-			info->tty->termios->c_cflag &= ~CBAUDEX;
+			port->tty->termios->c_cflag &= ~CBAUDEX;
 		else
 			i += 15;
 	}
@@ -1040,20 +1047,20 @@ isdn_tty_change_speed(modem_info *info)
 
 	/* CTS flow control flag and modem status interrupts */
 	if (cflag & CRTSCTS) {
-		info->flags |= ISDN_ASYNC_CTS_FLOW;
+		port->flags |= ASYNC_CTS_FLOW;
 	} else
-		info->flags &= ~ISDN_ASYNC_CTS_FLOW;
+		port->flags &= ~ASYNC_CTS_FLOW;
 	if (cflag & CLOCAL)
-		info->flags &= ~ISDN_ASYNC_CHECK_CD;
+		port->flags &= ~ASYNC_CHECK_CD;
 	else {
-		info->flags |= ISDN_ASYNC_CHECK_CD;
+		port->flags |= ASYNC_CHECK_CD;
 	}
 }
 
 static int
 isdn_tty_startup(modem_info *info)
 {
-	if (info->flags & ISDN_ASYNC_INITIALIZED)
+	if (info->port.flags & ASYNC_INITIALIZED)
 		return 0;
 	isdn_lock_drivers();
 #ifdef ISDN_DEBUG_MODEM_OPEN
@@ -1063,14 +1070,14 @@ isdn_tty_startup(modem_info *info)
 	 * Now, initialize the UART
 	 */
 	info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-	if (info->tty)
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->port.tty)
+		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
 	/*
 	 * and set the speed of the serial port
 	 */
 	isdn_tty_change_speed(info);
 
-	info->flags |= ISDN_ASYNC_INITIALIZED;
+	info->port.flags |= ASYNC_INITIALIZED;
 	info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
 	info->send_outstanding = 0;
 	return 0;
@@ -1083,14 +1090,14 @@ isdn_tty_startup(modem_info *info)
 static void
 isdn_tty_shutdown(modem_info *info)
 {
-	if (!(info->flags & ISDN_ASYNC_INITIALIZED))
+	if (!(info->port.flags & ASYNC_INITIALIZED))
 		return;
 #ifdef ISDN_DEBUG_MODEM_OPEN
 	printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
 #endif
 	isdn_unlock_drivers();
 	info->msr &= ~UART_MSR_RI;
-	if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+	if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
 		info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS);
 		if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) {
 			isdn_tty_modem_reset_regs(info, 0);
@@ -1100,10 +1107,10 @@ isdn_tty_shutdown(modem_info *info)
 			isdn_tty_modem_hup(info, 1);
 		}
 	}
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->port.tty)
+		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-	info->flags &= ~ISDN_ASYNC_INITIALIZED;
+	info->port.flags &= ~ASYNC_INITIALIZED;
 }
 
 /* isdn_tty_write() is the main send-routine. It is called from the upper
@@ -1146,7 +1153,7 @@ isdn_tty_write(struct tty_struct *tty, const u_char *buf, int count)
 				isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c,
 						   &(m->pluscount),
 						   &(m->lastplus));
-			memcpy(&(info->xmit_buf[info->xmit_count]), buf, c);
+			memcpy(&info->port.xmit_buf[info->xmit_count], buf, c);
 #ifdef CONFIG_ISDN_AUDIO
 			if (info->vonline) {
 				int cc = isdn_tty_handleDLEdown(info, m, c);
@@ -1478,107 +1485,6 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
  * isdn_tty_open() and friends
  * ------------------------------------------------------------
  */
-static int
-isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *info)
-{
-	DECLARE_WAITQUEUE(wait, NULL);
-	int do_clocal = 0;
-	int retval;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (tty_hung_up_p(filp) ||
-	    (info->flags & ISDN_ASYNC_CLOSING)) {
-		if (info->flags & ISDN_ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-#ifdef MODEM_DO_RESTART
-		if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
-			return -EAGAIN;
-		else
-			return -ERESTARTSYS;
-#else
-		return -EAGAIN;
-#endif
-	}
-	/*
-	 * If non-blocking mode is set, then make the check up front
-	 * and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
-			return -EBUSY;
-		info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
-		return 0;
-	}
-	if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) {
-		if (info->normal_termios.c_cflag & CLOCAL)
-			do_clocal = 1;
-	} else {
-		if (tty->termios->c_cflag & CLOCAL)
-			do_clocal = 1;
-	}
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
-	 * isdn_tty_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
-#ifdef ISDN_DEBUG_MODEM_OPEN
-	printk(KERN_DEBUG "isdn_tty_block_til_ready before block: ttyi%d, count = %d\n",
-	       info->line, info->count);
-#endif
-	if (!(tty_hung_up_p(filp)))
-		info->count--;
-	info->blocked_open++;
-	while (1) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (tty_hung_up_p(filp) ||
-		    !(info->flags & ISDN_ASYNC_INITIALIZED)) {
-#ifdef MODEM_DO_RESTART
-			if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;
-#else
-			retval = -EAGAIN;
-#endif
-			break;
-		}
-		if (!(info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
-		    !(info->flags & ISDN_ASYNC_CLOSING) &&
-		    (do_clocal || (info->msr & UART_MSR_DCD))) {
-			break;
-		}
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-#ifdef ISDN_DEBUG_MODEM_OPEN
-		printk(KERN_DEBUG "isdn_tty_block_til_ready blocking: ttyi%d, count = %d\n",
-		       info->line, info->count);
-#endif
-		schedule();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&info->open_wait, &wait);
-	if (!tty_hung_up_p(filp))
-		info->count++;
-	info->blocked_open--;
-#ifdef ISDN_DEBUG_MODEM_OPEN
-	printk(KERN_DEBUG "isdn_tty_block_til_ready after blocking: ttyi%d, count = %d\n",
-	       info->line, info->count);
-#endif
-	if (retval)
-		return retval;
-	info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
-	return 0;
-}
 
 /*
  * This routine is called whenever a serial port is opened.  It
@@ -1589,23 +1495,22 @@ isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *
 static int
 isdn_tty_open(struct tty_struct *tty, struct file *filp)
 {
+	struct tty_port *port;
 	modem_info *info;
 	int retval;
 
 	info = &dev->mdm.info[tty->index];
 	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_open"))
 		return -ENODEV;
-	if (!try_module_get(info->owner)) {
-		printk(KERN_WARNING "%s: cannot reserve module\n", __func__);
-		return -ENODEV;
-	}
+	port = &info->port;
 #ifdef ISDN_DEBUG_MODEM_OPEN
 	printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name,
-	       info->count);
+	       port->count);
 #endif
-	info->count++;
+	port->count++;
 	tty->driver_data = info;
-	info->tty = tty;
+	port->tty = tty;
+	tty->port = port;
 	/*
 	 * Start up serial port
 	 */
@@ -1614,15 +1519,13 @@ isdn_tty_open(struct tty_struct *tty, struct file *filp)
 #ifdef ISDN_DEBUG_MODEM_OPEN
 		printk(KERN_DEBUG "isdn_tty_open return after startup\n");
 #endif
-		module_put(info->owner);
 		return retval;
 	}
-	retval = isdn_tty_block_til_ready(tty, filp, info);
+	retval = tty_port_block_til_ready(port, tty, filp);
 	if (retval) {
 #ifdef ISDN_DEBUG_MODEM_OPEN
 		printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n");
 #endif
-		module_put(info->owner);
 		return retval;
 	}
 #ifdef ISDN_DEBUG_MODEM_OPEN
@@ -1639,6 +1542,7 @@ static void
 isdn_tty_close(struct tty_struct *tty, struct file *filp)
 {
 	modem_info *info = (modem_info *) tty->driver_data;
+	struct tty_port *port = &info->port;
 	ulong timeout;
 
 	if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close"))
@@ -1649,7 +1553,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 #endif
 		return;
 	}
-	if ((tty->count == 1) && (info->count != 1)) {
+	if ((tty->count == 1) && (port->count != 1)) {
 		/*
 		 * Uh, oh.  tty->count is 1, which means that the tty
 		 * structure will be freed.  Info->count should always
@@ -1658,30 +1562,21 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 		 * serial port won't be shutdown.
 		 */
 		printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, "
-		       "info->count is %d\n", info->count);
-		info->count = 1;
+		       "info->count is %d\n", port->count);
+		port->count = 1;
 	}
-	if (--info->count < 0) {
+	if (--port->count < 0) {
 		printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n",
-		       info->line, info->count);
-		info->count = 0;
+		       info->line, port->count);
+		port->count = 0;
 	}
-	if (info->count) {
+	if (port->count) {
 #ifdef ISDN_DEBUG_MODEM_OPEN
 		printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n");
 #endif
-		module_put(info->owner);
 		return;
 	}
-	info->flags |= ISDN_ASYNC_CLOSING;
-	/*
-	 * Save the termios structure, since this port may have
-	 * separate termios for callout and dialin.
-	 */
-	if (info->flags & ISDN_ASYNC_NORMAL_ACTIVE)
-		info->normal_termios = *tty->termios;
-	if (info->flags & ISDN_ASYNC_CALLOUT_ACTIVE)
-		info->callout_termios = *tty->termios;
+	port->flags |= ASYNC_CLOSING;
 
 	tty->closing = 1;
 	/*
@@ -1690,7 +1585,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 	 * interrupt driver to stop checking the data ready bit in the
 	 * line status register.
 	 */
-	if (info->flags & ISDN_ASYNC_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		tty_wait_until_sent_from_close(tty, 3000);	/* 30 seconds timeout */
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
@@ -1708,16 +1603,10 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 	isdn_tty_shutdown(info);
 	isdn_tty_flush_buffer(tty);
 	tty_ldisc_flush(tty);
-	info->tty = NULL;
+	port->tty = NULL;
 	info->ncarrier = 0;
-	tty->closing = 0;
-	module_put(info->owner);
-	if (info->blocked_open) {
-		msleep_interruptible(500);
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CLOSING);
-	wake_up_interruptible(&info->close_wait);
+
+	tty_port_close_end(port, tty);
 #ifdef ISDN_DEBUG_MODEM_OPEN
 	printk(KERN_DEBUG "isdn_tty_close normal exit\n");
 #endif
@@ -1730,14 +1619,15 @@ static void
 isdn_tty_hangup(struct tty_struct *tty)
 {
 	modem_info *info = (modem_info *) tty->driver_data;
+	struct tty_port *port = &info->port;
 
 	if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup"))
 		return;
 	isdn_tty_shutdown(info);
-	info->count = 0;
-	info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE);
-	info->tty = NULL;
-	wake_up_interruptible(&info->open_wait);
+	port->count = 0;
+	port->flags &= ~ASYNC_NORMAL_ACTIVE;
+	port->tty = NULL;
+	wake_up_interruptible(&port->open_wait);
 }
 
 /* This routine initializes all emulator-data.
@@ -1864,6 +1754,16 @@ static const struct tty_operations modem_ops = {
 	.tiocmset = isdn_tty_tiocmset,
 };
 
+static int isdn_tty_carrier_raised(struct tty_port *port)
+{
+	modem_info *info = container_of(port, modem_info, port);
+	return info->msr & UART_MSR_DCD;
+}
+
+static const struct tty_port_operations isdn_tty_port_ops = {
+	.carrier_raised = isdn_tty_carrier_raised,
+};
+
 int
 isdn_tty_modem_init(void)
 {
@@ -1899,9 +1799,8 @@ isdn_tty_modem_init(void)
 			goto err_unregister;
 		}
 #endif
-#ifdef MODULE
-		info->owner = THIS_MODULE;
-#endif
+		tty_port_init(&info->port);
+		info->port.ops = &isdn_tty_port_ops;
 		spin_lock_init(&info->readlock);
 		sprintf(info->last_cause, "0000");
 		sprintf(info->last_num, "none");
@@ -1913,12 +1812,7 @@ isdn_tty_modem_init(void)
 		isdn_tty_modem_reset_regs(info, 1);
 		info->magic = ISDN_ASYNC_MAGIC;
 		info->line = i;
-		info->tty = NULL;
 		info->x_char = 0;
-		info->count = 0;
-		info->blocked_open = 0;
-		init_waitqueue_head(&info->open_wait);
-		init_waitqueue_head(&info->close_wait);
 		info->isdn_driver = -1;
 		info->isdn_channel = -1;
 		info->drv_index = -1;
@@ -1930,13 +1824,15 @@ isdn_tty_modem_init(void)
 #ifdef CONFIG_ISDN_AUDIO
 		skb_queue_head_init(&info->dtmf_queue);
 #endif
-		if (!(info->xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5, GFP_KERNEL))) {
+		info->port.xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5,
+				GFP_KERNEL);
+		if (!info->port.xmit_buf) {
 			printk(KERN_ERR "Could not allocate modem xmit-buffer\n");
 			retval = -ENOMEM;
 			goto err_unregister;
 		}
 		/* Make room for T.70 header */
-		info->xmit_buf += 4;
+		info->port.xmit_buf += 4;
 	}
 	return 0;
 err_unregister:
@@ -1945,7 +1841,7 @@ err_unregister:
 #ifdef CONFIG_ISDN_TTY_FAX
 		kfree(info->fax);
 #endif
-		kfree(info->xmit_buf - 4);
+		kfree(info->port.xmit_buf - 4);
 	}
 	tty_unregister_driver(m->tty_modem);
 err:
@@ -1966,7 +1862,7 @@ isdn_tty_exit(void)
 #ifdef CONFIG_ISDN_TTY_FAX
 		kfree(info->fax);
 #endif
-		kfree(info->xmit_buf - 4);
+		kfree(info->port.xmit_buf - 4);
 	}
 	tty_unregister_driver(dev->mdm.tty_modem);
 	put_tty_driver(dev->mdm.tty_modem);
@@ -2068,7 +1964,7 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
 	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
 		modem_info *info = &dev->mdm.info[i];
 
-		if (info->count == 0)
+		if (info->port.count == 0)
 			continue;
 		if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) &&  /* SI1 is matching */
 		    (info->emu.mdmreg[REG_SI2] == si2))	{         /* SI2 is matching */
@@ -2076,12 +1972,12 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
 #ifdef ISDN_DEBUG_MODEM_ICALL
 			printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret);
 			printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx,
-			       info->flags, info->isdn_driver, info->isdn_channel,
-			       dev->usage[idx]);
+			       info->port.flags, info->isdn_driver,
+			       info->isdn_channel, dev->usage[idx]);
 #endif
 			if (
 #ifndef FIX_FILE_TRANSFER
-				(info->flags & ISDN_ASYNC_NORMAL_ACTIVE) &&
+				(info->port.flags & ASYNC_NORMAL_ACTIVE) &&
 #endif
 				(info->isdn_driver == -1) &&
 				(info->isdn_channel == -1) &&
@@ -2120,8 +2016,7 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
 	return (wret == 2) ? 3 : 0;
 }
 
-#define TTY_IS_ACTIVE(info)						\
-	(info->flags & (ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CALLOUT_ACTIVE))
+#define TTY_IS_ACTIVE(info)	(info->port.flags & ASYNC_NORMAL_ACTIVE)
 
 int
 isdn_tty_stat_callback(int i, isdn_ctrl *c)
@@ -2212,9 +2107,9 @@ isdn_tty_stat_callback(int i, isdn_ctrl *c)
 			 * for incoming call of this device when
 			 * DCD follow the state of incoming carrier
 			 */
-			if (info->blocked_open &&
+			if (info->port.blocked_open &&
 			    (info->emu.mdmreg[REG_DCD] & BIT_DCD)) {
-				wake_up_interruptible(&info->open_wait);
+				wake_up_interruptible(&info->port.open_wait);
 			}
 
 			/* Schedule CONNECT-Message to any tty
@@ -2222,7 +2117,8 @@ isdn_tty_stat_callback(int i, isdn_ctrl *c)
 			 * set DCD-bit of its modem-status.
 			 */
 			if (TTY_IS_ACTIVE(info) ||
-			    (info->blocked_open && (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
+			    (info->port.blocked_open &&
+			     (info->emu.mdmreg[REG_DCD] & BIT_DCD))) {
 				info->msr |= UART_MSR_DCD;
 				info->emu.charge = 0;
 				if (info->dialing & 0xf)
@@ -2339,8 +2235,8 @@ isdn_tty_at_cout(char *msg, modem_info *info)
 	l = strlen(msg);
 
 	spin_lock_irqsave(&info->readlock, flags);
-	tty = info->tty;
-	if ((info->flags & ISDN_ASYNC_CLOSING) || (!tty)) {
+	tty = info->port.tty;
+	if ((info->port.flags & ASYNC_CLOSING) || (!tty)) {
 		spin_unlock_irqrestore(&info->readlock, flags);
 		return;
 	}
@@ -2490,15 +2386,15 @@ isdn_tty_modem_result(int code, modem_info *info)
 	case RESULT_NO_CARRIER:
 #ifdef ISDN_DEBUG_MODEM_HUP
 		printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
-		       (info->flags & ISDN_ASYNC_CLOSING),
-		       (!info->tty));
+		       (info->port.flags & ASYNC_CLOSING),
+		       (!info->port.tty));
 #endif
 		m->mdmreg[REG_RINGCNT] = 0;
 		del_timer(&info->nc_timer);
 		info->ncarrier = 0;
-		if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+		if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
 			return;
-		}
+
 #ifdef CONFIG_ISDN_AUDIO
 		if (info->vonline & 1) {
 #ifdef ISDN_DEBUG_MODEM_VOICE
@@ -2629,14 +2525,11 @@ isdn_tty_modem_result(int code, modem_info *info)
 		}
 	}
 	if (code == RESULT_NO_CARRIER) {
-		if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+		if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
 			return;
-		}
-		if ((info->flags & ISDN_ASYNC_CHECK_CD) &&
-		    (!((info->flags & ISDN_ASYNC_CALLOUT_ACTIVE) &&
-		       (info->flags & ISDN_ASYNC_CALLOUT_NOHUP)))) {
-			tty_hangup(info->tty);
-		}
+
+		if (info->port.flags & ASYNC_CHECK_CD)
+			tty_hangup(info->port.tty);
 	}
 }
 
@@ -3803,19 +3696,19 @@ isdn_tty_modem_escape(void)
 	int midx;
 
 	for (i = 0; i < ISDN_MAX_CHANNELS; i++)
-		if (USG_MODEM(dev->usage[i]))
-			if ((midx = dev->m_idx[i]) >= 0) {
-				modem_info *info = &dev->mdm.info[midx];
-				if (info->online) {
-					ton = 1;
-					if ((info->emu.pluscount == 3) &&
-					    time_after(jiffies , info->emu.lastplus + PLUSWAIT2)) {
-						info->emu.pluscount = 0;
-						info->online = 0;
-						isdn_tty_modem_result(RESULT_OK, info);
-					}
+		if (USG_MODEM(dev->usage[i]) && (midx = dev->m_idx[i]) >= 0) {
+			modem_info *info = &dev->mdm.info[midx];
+			if (info->online) {
+				ton = 1;
+				if ((info->emu.pluscount == 3) &&
+				    time_after(jiffies,
+					    info->emu.lastplus + PLUSWAIT2)) {
+					info->emu.pluscount = 0;
+					info->online = 0;
+					isdn_tty_modem_result(RESULT_OK, info);
 				}
 			}
+		}
 	isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton);
 }
 
@@ -3873,15 +3766,14 @@ isdn_tty_carrier_timeout(void)
 
 	for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
 		modem_info *info = &dev->mdm.info[i];
-		if (info->dialing) {
-			if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
-				info->dialing = 0;
-				isdn_tty_modem_result(RESULT_NO_CARRIER, info);
-				isdn_tty_modem_hup(info, 1);
-			}
-			else
-				ton = 1;
-		}
+		if (!info->dialing)
+			continue;
+		if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) {
+			info->dialing = 0;
+			isdn_tty_modem_result(RESULT_NO_CARRIER, info);
+			isdn_tty_modem_hup(info, 1);
+		} else
+			ton = 1;
 	}
 	isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton);
 }
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index fa51af11c6f1..a555da64224e 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -204,11 +204,14 @@ config THERM_ADT746X
 	  better fan behaviour by default, and some manual control.
 
 config THERM_PM72
-	tristate "Support for thermal management on PowerMac G5"
+	tristate "Support for thermal management on PowerMac G5 (AGP)"
 	depends on I2C && I2C_POWERMAC && PPC_PMAC64
+	default n
 	help
 	  This driver provides thermostat and fan control for the desktop
-	  G5 machines. 
+	  G5 machines.
+
+	  This is deprecated, use windfarm instead.
 
 config WINDFARM
 	tristate "New PowerMac thermal control infrastructure"
@@ -221,6 +224,22 @@ config WINDFARM_PM81
 	help
 	  This driver provides thermal control for the iMacG5
 
+config WINDFARM_PM72
+	tristate "Support for thermal management on PowerMac G5 (AGP)"
+	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
+	select I2C_POWERMAC
+	help
+	  This driver provides thermal control for the PowerMac G5
+	  "AGP" variants (PowerMac 7,2 and 7,3)
+
+config WINDFARM_RM31
+	tristate "Support for thermal management on Xserve G5"
+	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
+	select I2C_POWERMAC
+	help
+	  This driver provides thermal control for the Xserve G5
+	  (RackMac3,1)
+
 config WINDFARM_PM91
 	tristate "Support for thermal management on PowerMac9,1"
 	depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index 6652a6ebb6fa..6753b65f8ede 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -29,6 +29,20 @@ obj-$(CONFIG_THERM_PM72)	+= therm_pm72.o
 obj-$(CONFIG_THERM_WINDTUNNEL)	+= therm_windtunnel.o
 obj-$(CONFIG_THERM_ADT746X)	+= therm_adt746x.o
 obj-$(CONFIG_WINDFARM)	        += windfarm_core.o
+obj-$(CONFIG_WINDFARM_PM72)     += windfarm_fcu_controls.o \
+				   windfarm_ad7417_sensor.o \
+				   windfarm_lm75_sensor.o \
+				   windfarm_max6690_sensor.o \
+				   windfarm_pid.o \
+				   windfarm_cpufreq_clamp.o \
+				   windfarm_pm72.o
+obj-$(CONFIG_WINDFARM_RM31)     += windfarm_fcu_controls.o \
+				   windfarm_ad7417_sensor.o \
+				   windfarm_lm75_sensor.o \
+				   windfarm_lm87_sensor.o \
+				   windfarm_pid.o \
+				   windfarm_cpufreq_clamp.o \
+				   windfarm_rm31.o
 obj-$(CONFIG_WINDFARM_PM81)     += windfarm_smu_controls.o \
 				   windfarm_smu_sensors.o \
 				   windfarm_lm75_sensor.o windfarm_pid.o \
diff --git a/drivers/macintosh/ams/ams-i2c.c b/drivers/macintosh/ams/ams-i2c.c
index abeecd27b484..978eda8d6678 100644
--- a/drivers/macintosh/ams/ams-i2c.c
+++ b/drivers/macintosh/ams/ams-i2c.c
@@ -65,7 +65,7 @@ static int ams_i2c_probe(struct i2c_client *client,
 static int ams_i2c_remove(struct i2c_client *client);
 
 static const struct i2c_device_id ams_id[] = {
-	{ "ams", 0 },
+	{ "MAC,accelerometer_1", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ams_id);
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index fc71723cbc48..f433521a6f9d 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -47,7 +47,7 @@ static u8 FAN_SPD_SET[2] = {0x30, 0x31};
 
 static u8 default_limits_local[3] = {70, 50, 70};    /* local, sensor1, sensor2 */
 static u8 default_limits_chip[3] = {80, 65, 80};    /* local, sensor1, sensor2 */
-static const char *sensor_location[3];
+static const char *sensor_location[3] = { "?", "?", "?" };
 
 static int limit_adjust;
 static int fan_speed = -1;
@@ -79,18 +79,16 @@ struct thermostat {
 	int			last_speed[2];
 	int			last_var[2];
 	int			pwm_inv[2];
+	struct task_struct	*thread;
+	struct platform_device	*pdev;
+	enum {
+		ADT7460,
+		ADT7467
+	}			type;
 };
 
-static enum {ADT7460, ADT7467} therm_type;
-static int therm_bus, therm_address;
-static struct platform_device * of_dev;
-static struct thermostat* thermostat;
-static struct task_struct *thread_therm = NULL;
-
 static void write_both_fan_speed(struct thermostat *th, int speed);
 static void write_fan_speed(struct thermostat *th, int speed, int fan);
-static void thermostat_create_files(void);
-static void thermostat_remove_files(void);
 
 static int
 write_reg(struct thermostat* th, int reg, u8 data)
@@ -126,66 +124,6 @@ read_reg(struct thermostat* th, int reg)
 	return data;
 }
 
-static struct i2c_driver thermostat_driver;
-
-static int
-attach_thermostat(struct i2c_adapter *adapter)
-{
-	unsigned long bus_no;
-	struct i2c_board_info info;
-	struct i2c_client *client;
-
-	if (strncmp(adapter->name, "uni-n", 5))
-		return -ENODEV;
-	bus_no = simple_strtoul(adapter->name + 6, NULL, 10);
-	if (bus_no != therm_bus)
-		return -ENODEV;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	strlcpy(info.type, "therm_adt746x", I2C_NAME_SIZE);
-	info.addr = therm_address;
-	client = i2c_new_device(adapter, &info);
-	if (!client)
-		return -ENODEV;
-
-	/*
-	 * Let i2c-core delete that device on driver removal.
-	 * This is safe because i2c-core holds the core_lock mutex for us.
-	 */
-	list_add_tail(&client->detected, &thermostat_driver.clients);
-	return 0;
-}
-
-static int
-remove_thermostat(struct i2c_client *client)
-{
-	struct thermostat *th = i2c_get_clientdata(client);
-	int i;
-	
-	thermostat_remove_files();
-
-	if (thread_therm != NULL) {
-		kthread_stop(thread_therm);
-	}
-
-	printk(KERN_INFO "adt746x: Putting max temperatures back from "
-			 "%d, %d, %d to %d, %d, %d\n",
-		th->limits[0], th->limits[1], th->limits[2],
-		th->initial_limits[0], th->initial_limits[1],
-		th->initial_limits[2]);
-
-	for (i = 0; i < 3; i++)
-		write_reg(th, LIMIT_REG[i], th->initial_limits[i]);
-
-	write_both_fan_speed(th, -1);
-
-	thermostat = NULL;
-
-	kfree(th);
-
-	return 0;
-}
-
 static int read_fan_speed(struct thermostat *th, u8 addr)
 {
 	u8 tmp[2];
@@ -203,7 +141,7 @@ static int read_fan_speed(struct thermostat *th, u8 addr)
 static void write_both_fan_speed(struct thermostat *th, int speed)
 {
 	write_fan_speed(th, speed, 0);
-	if (therm_type == ADT7460)
+	if (th->type == ADT7460)
 		write_fan_speed(th, speed, 1);
 }
 
@@ -216,7 +154,7 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan)
 	else if (speed < -1) 
 		speed = 0;
 	
-	if (therm_type == ADT7467 && fan == 1)
+	if (th->type == ADT7467 && fan == 1)
 		return;
 	
 	if (th->last_speed[fan] != speed) {
@@ -239,7 +177,7 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan)
 		write_reg(th, FAN_SPD_SET[fan], speed);
 	} else {
 		/* back to automatic */
-		if(therm_type == ADT7460) {
+		if(th->type == ADT7460) {
 			manual = read_reg(th,
 				MANUAL_MODE[fan]) & (~MANUAL_MASK);
 			manual &= ~INVERT_MASK;
@@ -293,7 +231,7 @@ static void update_fans_speed (struct thermostat *th)
 	/* we don't care about local sensor, so we start at sensor 1 */
 	for (i = 1; i < 3; i++) {
 		int started = 0;
-		int fan_number = (therm_type == ADT7460 && i == 2);
+		int fan_number = (th->type == ADT7460 && i == 2);
 		int var = th->temps[i] - th->limits[i];
 
 		if (var > -1) {
@@ -370,116 +308,22 @@ static int monitor_task(void *arg)
 
 static void set_limit(struct thermostat *th, int i)
 {
-		/* Set sensor1 limit higher to avoid powerdowns */
-		th->limits[i] = default_limits_chip[i] + limit_adjust;
-		write_reg(th, LIMIT_REG[i], th->limits[i]);
+	/* Set sensor1 limit higher to avoid powerdowns */
+	th->limits[i] = default_limits_chip[i] + limit_adjust;
+	write_reg(th, LIMIT_REG[i], th->limits[i]);
 		
-		/* set our limits to normal */
-		th->limits[i] = default_limits_local[i] + limit_adjust;
+	/* set our limits to normal */
+	th->limits[i] = default_limits_local[i] + limit_adjust;
 }
 
-static int probe_thermostat(struct i2c_client *client,
-			    const struct i2c_device_id *id)
-{
-	struct thermostat* th;
-	int rc;
-	int i;
-
-	if (thermostat)
-		return 0;
-
-	th = kzalloc(sizeof(struct thermostat), GFP_KERNEL);
-	if (!th)
-		return -ENOMEM;
-
-	i2c_set_clientdata(client, th);
-	th->clt = client;
-
-	rc = read_reg(th, CONFIG_REG);
-	if (rc < 0) {
-		dev_err(&client->dev, "Thermostat failed to read config!\n");
-		kfree(th);
-		return -ENODEV;
-	}
-
-	/* force manual control to start the fan quieter */
-	if (fan_speed == -1)
-		fan_speed = 64;
-	
-	if(therm_type == ADT7460) {
-		printk(KERN_INFO "adt746x: ADT7460 initializing\n");
-		/* The 7460 needs to be started explicitly */
-		write_reg(th, CONFIG_REG, 1);
-	} else
-		printk(KERN_INFO "adt746x: ADT7467 initializing\n");
-
-	for (i = 0; i < 3; i++) {
-		th->initial_limits[i] = read_reg(th, LIMIT_REG[i]);
-		set_limit(th, i);
-	}
-
-	printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d"
-			 " to %d, %d, %d\n",
-			 th->initial_limits[0], th->initial_limits[1],
-			 th->initial_limits[2], th->limits[0], th->limits[1],
-			 th->limits[2]);
-
-	thermostat = th;
-
-	/* record invert bit status because fw can corrupt it after suspend */
-	th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK;
-	th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK;
-
-	/* be sure to really write fan speed the first time */
-	th->last_speed[0] = -2;
-	th->last_speed[1] = -2;
-	th->last_var[0] = -80;
-	th->last_var[1] = -80;
-
-	if (fan_speed != -1) {
-		/* manual mode, stop fans */
-		write_both_fan_speed(th, 0);
-	} else {
-		/* automatic mode */
-		write_both_fan_speed(th, -1);
-	}
-	
-	thread_therm = kthread_run(monitor_task, th, "kfand");
-
-	if (thread_therm == ERR_PTR(-ENOMEM)) {
-		printk(KERN_INFO "adt746x: Kthread creation failed\n");
-		thread_therm = NULL;
-		return -ENOMEM;
-	}
-
-	thermostat_create_files();
-
-	return 0;
+#define BUILD_SHOW_FUNC_INT(name, data)				\
+static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf)	\
+{								\
+	struct thermostat *th = dev_get_drvdata(dev);		\
+	return sprintf(buf, "%d\n", data);			\
 }
 
-static const struct i2c_device_id therm_adt746x_id[] = {
-	{ "therm_adt746x", 0 },
-	{ }
-};
-
-static struct i2c_driver thermostat_driver = {
-	.driver = {
-		.name	= "therm_adt746x",
-	},
-	.attach_adapter	= attach_thermostat,
-	.probe = probe_thermostat,
-	.remove = remove_thermostat,
-	.id_table = therm_adt746x_id,
-};
-
-/* 
- * Now, unfortunately, sysfs doesn't give us a nice void * we could
- * pass around to the attribute functions, so we don't really have
- * choice but implement a bunch of them...
- *
- * FIXME, it does now...
- */
-#define BUILD_SHOW_FUNC_INT(name, data)				\
+#define BUILD_SHOW_FUNC_INT_LITE(name, data)				\
 static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf)	\
 {								\
 	return sprintf(buf, "%d\n", data);			\
@@ -494,22 +338,24 @@ static ssize_t show_##name(struct device *dev, struct device_attribute *attr, ch
 #define BUILD_SHOW_FUNC_FAN(name, data)				\
 static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf)       \
 {								\
+	struct thermostat *th = dev_get_drvdata(dev);		\
 	return sprintf(buf, "%d (%d rpm)\n", 			\
-		thermostat->last_speed[data],			\
-		read_fan_speed(thermostat, FAN_SPEED[data])	\
+		th->last_speed[data],				\
+		read_fan_speed(th, FAN_SPEED[data])		\
 		);						\
 }
 
 #define BUILD_STORE_FUNC_DEG(name, data)			\
 static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
 {								\
+	struct thermostat *th = dev_get_drvdata(dev);		\
 	int val;						\
 	int i;							\
 	val = simple_strtol(buf, NULL, 10);			\
 	printk(KERN_INFO "Adjusting limits by %d degrees\n", val);	\
 	limit_adjust = val;					\
 	for (i=0; i < 3; i++)					\
-		set_limit(thermostat, i);			\
+		set_limit(th, i);				\
 	return n;						\
 }
 
@@ -525,20 +371,21 @@ static ssize_t store_##name(struct device *dev, struct device_attribute *attr, c
 	return n;						\
 }
 
-BUILD_SHOW_FUNC_INT(sensor1_temperature,	 (read_reg(thermostat, TEMP_REG[1])))
-BUILD_SHOW_FUNC_INT(sensor2_temperature,	 (read_reg(thermostat, TEMP_REG[2])))
-BUILD_SHOW_FUNC_INT(sensor1_limit,		 thermostat->limits[1])
-BUILD_SHOW_FUNC_INT(sensor2_limit,		 thermostat->limits[2])
+BUILD_SHOW_FUNC_INT(sensor1_temperature,	 (read_reg(th, TEMP_REG[1])))
+BUILD_SHOW_FUNC_INT(sensor2_temperature,	 (read_reg(th, TEMP_REG[2])))
+BUILD_SHOW_FUNC_INT(sensor1_limit,		 th->limits[1])
+BUILD_SHOW_FUNC_INT(sensor2_limit,		 th->limits[2])
 BUILD_SHOW_FUNC_STR(sensor1_location,		 sensor_location[1])
 BUILD_SHOW_FUNC_STR(sensor2_location,		 sensor_location[2])
 
-BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed)
+BUILD_SHOW_FUNC_INT_LITE(specified_fan_speed, fan_speed)
+BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed)
+
 BUILD_SHOW_FUNC_FAN(sensor1_fan_speed,	 0)
 BUILD_SHOW_FUNC_FAN(sensor2_fan_speed,	 1)
 
-BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed)
-BUILD_SHOW_FUNC_INT(limit_adjust,	 limit_adjust)
-BUILD_STORE_FUNC_DEG(limit_adjust,	 thermostat)
+BUILD_SHOW_FUNC_INT_LITE(limit_adjust,	 limit_adjust)
+BUILD_STORE_FUNC_DEG(limit_adjust,	 th)
 		
 static DEVICE_ATTR(sensor1_temperature,	S_IRUGO,
 		   show_sensor1_temperature,NULL);
@@ -564,53 +411,77 @@ static DEVICE_ATTR(sensor2_fan_speed,	S_IRUGO,
 static DEVICE_ATTR(limit_adjust,	S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
 		   show_limit_adjust,	store_limit_adjust);
 
-
-static int __init
-thermostat_init(void)
+static void thermostat_create_files(struct thermostat *th)
 {
-	struct device_node* np;
-	const u32 *prop;
-	int i = 0, offset = 0;
+	struct device_node *np = th->clt->dev.of_node;
+	struct device *dev;
+	int err;
 
-	np = of_find_node_by_name(NULL, "fan");
-	if (!np)
-		return -ENODEV;
-	if (of_device_is_compatible(np, "adt7460"))
-		therm_type = ADT7460;
-	else if (of_device_is_compatible(np, "adt7467"))
-		therm_type = ADT7467;
-	else {
-		of_node_put(np);
-		return -ENODEV;
-	}
+	/* To maintain ABI compatibility with userspace, create
+	 * the old style platform driver and attach the attributes
+	 * to it here
+	 */
+	th->pdev = of_platform_device_create(np, "temperatures", NULL);
+	if (!th->pdev)
+		return;
+	dev = &th->pdev->dev;
+	dev_set_drvdata(dev, th);
+	err = device_create_file(dev, &dev_attr_sensor1_temperature);
+	err |= device_create_file(dev, &dev_attr_sensor2_temperature);
+	err |= device_create_file(dev, &dev_attr_sensor1_limit);
+	err |= device_create_file(dev, &dev_attr_sensor2_limit);
+	err |= device_create_file(dev, &dev_attr_sensor1_location);
+	err |= device_create_file(dev, &dev_attr_sensor2_location);
+	err |= device_create_file(dev, &dev_attr_limit_adjust);
+	err |= device_create_file(dev, &dev_attr_specified_fan_speed);
+	err |= device_create_file(dev, &dev_attr_sensor1_fan_speed);
+	if(th->type == ADT7460)
+		err |= device_create_file(dev, &dev_attr_sensor2_fan_speed);
+	if (err)
+		printk(KERN_WARNING
+			"Failed to create temperature attribute file(s).\n");
+}
 
-	prop = of_get_property(np, "hwsensor-params-version", NULL);
-	printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
-			 (*prop == 1)?"":"un");
-	if (*prop != 1) {
-		of_node_put(np);
-		return -ENODEV;
-	}
+static void thermostat_remove_files(struct thermostat *th)
+{
+	struct device *dev;
 
-	prop = of_get_property(np, "reg", NULL);
-	if (!prop) {
-		of_node_put(np);
-		return -ENODEV;
-	}
+	if (!th->pdev)
+		return;
+	dev = &th->pdev->dev;
+	device_remove_file(dev, &dev_attr_sensor1_temperature);
+	device_remove_file(dev, &dev_attr_sensor2_temperature);
+	device_remove_file(dev, &dev_attr_sensor1_limit);
+	device_remove_file(dev, &dev_attr_sensor2_limit);
+	device_remove_file(dev, &dev_attr_sensor1_location);
+	device_remove_file(dev, &dev_attr_sensor2_location);
+	device_remove_file(dev, &dev_attr_limit_adjust);
+	device_remove_file(dev, &dev_attr_specified_fan_speed);
+	device_remove_file(dev, &dev_attr_sensor1_fan_speed);	
+	if (th->type == ADT7460)
+		device_remove_file(dev, &dev_attr_sensor2_fan_speed);
+	of_device_unregister(th->pdev);
 
-	/* look for bus either by path or using "reg" */
-	if (strstr(np->full_name, "/i2c-bus@") != NULL) {
-		const char *tmp_bus = (strstr(np->full_name, "/i2c-bus@") + 9);
-		therm_bus = tmp_bus[0]-'0';
-	} else {
-		therm_bus = ((*prop) >> 8) & 0x0f;
-	}
+}
 
-	therm_address = ((*prop) & 0xff) >> 1;
+static int probe_thermostat(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct device_node *np = client->dev.of_node;
+	struct thermostat* th;
+	const __be32 *prop;
+	int i, rc, vers, offset = 0;
 
-	printk(KERN_INFO "adt746x: Thermostat bus: %d, address: 0x%02x, "
-			 "limit_adjust: %d, fan_speed: %d\n",
-			 therm_bus, therm_address, limit_adjust, fan_speed);
+	if (!np)
+		return -ENXIO;
+	prop = of_get_property(np, "hwsensor-params-version", NULL);
+	if (!prop)
+		return -ENXIO;
+	vers = be32_to_cpup(prop);
+	printk(KERN_INFO "adt746x: version %d (%ssupported)\n",
+	       vers, vers == 1 ? "" : "un");
+	if (vers != 1)
+		return -ENXIO;
 
 	if (of_get_property(np, "hwsensor-location", NULL)) {
 		for (i = 0; i < 3; i++) {
@@ -623,72 +494,129 @@ thermostat_init(void)
 			printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]);
 			offset += strlen(sensor_location[i]) + 1;
 		}
-	} else {
-		sensor_location[0] = "?";
-		sensor_location[1] = "?";
-		sensor_location[2] = "?";
 	}
 
-	of_dev = of_platform_device_create(np, "temperatures", NULL);
-	of_node_put(np);
+	th = kzalloc(sizeof(struct thermostat), GFP_KERNEL);
+	if (!th)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, th);
+	th->clt = client;
+	th->type = id->driver_data;
 
-	if (of_dev == NULL) {
-		printk(KERN_ERR "Can't register temperatures device !\n");
+	rc = read_reg(th, CONFIG_REG);
+	if (rc < 0) {
+		dev_err(&client->dev, "Thermostat failed to read config!\n");
+		kfree(th);
 		return -ENODEV;
 	}
 
-#ifndef CONFIG_I2C_POWERMAC
-	request_module("i2c-powermac");
-#endif
+	/* force manual control to start the fan quieter */
+	if (fan_speed == -1)
+		fan_speed = 64;
+	
+	if (th->type == ADT7460) {
+		printk(KERN_INFO "adt746x: ADT7460 initializing\n");
+		/* The 7460 needs to be started explicitly */
+		write_reg(th, CONFIG_REG, 1);
+	} else
+		printk(KERN_INFO "adt746x: ADT7467 initializing\n");
 
-	return i2c_add_driver(&thermostat_driver);
+	for (i = 0; i < 3; i++) {
+		th->initial_limits[i] = read_reg(th, LIMIT_REG[i]);
+		set_limit(th, i);
+	}
+
+	printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d"
+			 " to %d, %d, %d\n",
+			 th->initial_limits[0], th->initial_limits[1],
+			 th->initial_limits[2], th->limits[0], th->limits[1],
+			 th->limits[2]);
+
+	/* record invert bit status because fw can corrupt it after suspend */
+	th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK;
+	th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK;
+
+	/* be sure to really write fan speed the first time */
+	th->last_speed[0] = -2;
+	th->last_speed[1] = -2;
+	th->last_var[0] = -80;
+	th->last_var[1] = -80;
+
+	if (fan_speed != -1) {
+		/* manual mode, stop fans */
+		write_both_fan_speed(th, 0);
+	} else {
+		/* automatic mode */
+		write_both_fan_speed(th, -1);
+	}
+	
+	th->thread = kthread_run(monitor_task, th, "kfand");
+	if (th->thread == ERR_PTR(-ENOMEM)) {
+		printk(KERN_INFO "adt746x: Kthread creation failed\n");
+		th->thread = NULL;
+		return -ENOMEM;
+	}
+
+	thermostat_create_files(th);
+
+	return 0;
 }
 
-static void thermostat_create_files(void)
+static int remove_thermostat(struct i2c_client *client)
 {
-	int err;
+	struct thermostat *th = i2c_get_clientdata(client);
+	int i;
+	
+	thermostat_remove_files(th);
 
-	err = device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
-	err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
-	err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
-	err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
-	err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
-	err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
-	err |= device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
-	err |= device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
-	err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
-	if(therm_type == ADT7460)
-		err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
-	if (err)
-		printk(KERN_WARNING
-			"Failed to create temperature attribute file(s).\n");
+	if (th->thread != NULL)
+		kthread_stop(th->thread);
+
+	printk(KERN_INFO "adt746x: Putting max temperatures back from "
+			 "%d, %d, %d to %d, %d, %d\n",
+		th->limits[0], th->limits[1], th->limits[2],
+		th->initial_limits[0], th->initial_limits[1],
+		th->initial_limits[2]);
+
+	for (i = 0; i < 3; i++)
+		write_reg(th, LIMIT_REG[i], th->initial_limits[i]);
+
+	write_both_fan_speed(th, -1);
+
+	kfree(th);
+
+	return 0;
 }
 
-static void thermostat_remove_files(void)
+static const struct i2c_device_id therm_adt746x_id[] = {
+	{ "MAC,adt7460", ADT7460 },
+	{ "MAC,adt7467", ADT7467 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, therm_adt746x_id);
+
+static struct i2c_driver thermostat_driver = {
+	.driver = {
+		.name	= "therm_adt746x",
+	},
+	.probe = probe_thermostat,
+	.remove = remove_thermostat,
+	.id_table = therm_adt746x_id,
+};
+
+static int __init thermostat_init(void)
 {
-	if (of_dev) {
-		device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature);
-		device_remove_file(&of_dev->dev, &dev_attr_sensor2_temperature);
-		device_remove_file(&of_dev->dev, &dev_attr_sensor1_limit);
-		device_remove_file(&of_dev->dev, &dev_attr_sensor2_limit);
-		device_remove_file(&of_dev->dev, &dev_attr_sensor1_location);
-		device_remove_file(&of_dev->dev, &dev_attr_sensor2_location);
-		device_remove_file(&of_dev->dev, &dev_attr_limit_adjust);
-		device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed);
-		device_remove_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
-
-		if(therm_type == ADT7460)
-			device_remove_file(&of_dev->dev,
-					   &dev_attr_sensor2_fan_speed);
+#ifndef CONFIG_I2C_POWERMAC
+	request_module("i2c-powermac");
+#endif
 
-	}
+	return i2c_add_driver(&thermostat_driver);
 }
 
-static void __exit
-thermostat_exit(void)
+static void __exit thermostat_exit(void)
 {
 	i2c_del_driver(&thermostat_driver);
-	of_device_unregister(of_dev);
 }
 
 module_init(thermostat_init);
diff --git a/drivers/macintosh/windfarm.h b/drivers/macintosh/windfarm.h
index 7a2482cc26a7..028cdac2d33d 100644
--- a/drivers/macintosh/windfarm.h
+++ b/drivers/macintosh/windfarm.h
@@ -17,7 +17,7 @@
 #include <linux/device.h>
 
 /* Display a 16.16 fixed point value */
-#define FIX32TOPRINT(f)	((f) >> 16),((((f) & 0xffff) * 1000) >> 16)
+#define FIX32TOPRINT(f)	(((s32)(f)) >> 16),(((((s32)(f)) & 0xffff) * 1000) >> 16)
 
 /*
  * Control objects
@@ -35,12 +35,13 @@ struct wf_control_ops {
 };
 
 struct wf_control {
-	struct list_head	link;
-	struct wf_control_ops	*ops;
-	char			*name;
-	int			type;
-	struct kref		ref;
-	struct device_attribute	attr;
+	struct list_head		link;
+	const struct wf_control_ops	*ops;
+	const char			*name;
+	int				type;
+	struct kref			ref;
+	struct device_attribute		attr;
+	void				*priv;
 };
 
 #define WF_CONTROL_TYPE_GENERIC		0
@@ -72,6 +73,26 @@ static inline int wf_control_set_min(struct wf_control *ct)
 	return ct->ops->set_value(ct, vmin);
 }
 
+static inline int wf_control_set(struct wf_control *ct, s32 val)
+{
+	return ct->ops->set_value(ct, val);
+}
+
+static inline int wf_control_get(struct wf_control *ct, s32 *val)
+{
+	return ct->ops->get_value(ct, val);
+}
+
+static inline s32 wf_control_get_min(struct wf_control *ct)
+{
+	return ct->ops->get_min(ct);
+}
+
+static inline s32 wf_control_get_max(struct wf_control *ct)
+{
+	return ct->ops->get_max(ct);
+}
+
 /*
  * Sensor objects
  */
@@ -85,11 +106,12 @@ struct wf_sensor_ops {
 };
 
 struct wf_sensor {
-	struct list_head	link;
-	struct wf_sensor_ops	*ops;
-	char			*name;
-	struct kref		ref;
-	struct device_attribute	attr;
+	struct list_head		link;
+	const struct wf_sensor_ops	*ops;
+	const char			*name;
+	struct kref			ref;
+	struct device_attribute		attr;
+	void				*priv;
 };
 
 /* Same lifetime rules as controls */
@@ -99,6 +121,11 @@ extern struct wf_sensor * wf_find_sensor(const char *name);
 extern int wf_get_sensor(struct wf_sensor *sr);
 extern void wf_put_sensor(struct wf_sensor *sr);
 
+static inline int wf_sensor_get(struct wf_sensor *sr, s32 *val)
+{
+	return sr->ops->get_value(sr, val);
+}
+
 /* For use by clients. Note that we are a bit racy here since
  * notifier_block doesn't have a module owner field. I may fix
  * it one day ...
diff --git a/drivers/macintosh/windfarm_ad7417_sensor.c b/drivers/macintosh/windfarm_ad7417_sensor.c
new file mode 100644
index 000000000000..ac3f243b9c5a
--- /dev/null
+++ b/drivers/macintosh/windfarm_ad7417_sensor.c
@@ -0,0 +1,347 @@
+/*
+ * Windfarm PowerMac thermal control. AD7417 sensors
+ *
+ * Copyright 2012 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * Released under the term of the GNU GPL v2.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/i2c.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+#include "windfarm.h"
+#include "windfarm_mpu.h"
+
+#define VERSION "1.0"
+
+struct wf_ad7417_priv {
+	struct kref		ref;
+	struct i2c_client	*i2c;
+	u8			config;
+	u8			cpu;
+	const struct mpu_data	*mpu;
+	struct wf_sensor	sensors[5];
+	struct mutex		lock;
+};
+
+static int wf_ad7417_temp_get(struct wf_sensor *sr, s32 *value)
+{
+	struct wf_ad7417_priv *pv = sr->priv;
+	u8 buf[2];
+	s16 raw;
+	int rc;
+
+	*value = 0;
+	mutex_lock(&pv->lock);
+
+	/* Read temp register */
+	buf[0] = 0;
+	rc = i2c_master_send(pv->i2c, buf, 1);
+	if (rc < 0)
+		goto error;
+	rc = i2c_master_recv(pv->i2c, buf, 2);
+	if (rc < 0)
+		goto error;
+
+	/* Read a a 16-bit signed value */
+	raw = be16_to_cpup((__le16 *)buf);
+
+	/* Convert 8.8-bit to 16.16 fixed point */
+	*value = ((s32)raw) << 8;
+
+	mutex_unlock(&pv->lock);
+	return 0;
+
+error:
+	mutex_unlock(&pv->lock);
+	return -1;
+}
+
+/*
+ * Scaling factors for the AD7417 ADC converters (except
+ * for the CPU diode which is obtained from the EEPROM).
+ * Those values are obtained from the property list of
+ * the darwin driver
+ */
+#define ADC_12V_CURRENT_SCALE	0x0320	/* _AD2 */
+#define ADC_CPU_VOLTAGE_SCALE	0x00a0	/* _AD3 */
+#define ADC_CPU_CURRENT_SCALE	0x1f40	/* _AD4 */
+
+static void wf_ad7417_adc_convert(struct wf_ad7417_priv *pv,
+				  int chan, s32 raw, s32 *value)
+{
+	switch(chan) {
+	case 1: /* Diode */
+		*value = (raw * (s32)pv->mpu->mdiode +
+			((s32)pv->mpu->bdiode << 12)) >> 2;
+		break;
+	case 2: /* 12v current */
+		*value = raw * ADC_12V_CURRENT_SCALE;
+		break;
+	case 3: /* core voltage */
+		*value = raw * ADC_CPU_VOLTAGE_SCALE;
+		break;
+	case 4: /* core current */
+		*value = raw * ADC_CPU_CURRENT_SCALE;
+		break;
+	}
+}
+
+static int wf_ad7417_adc_get(struct wf_sensor *sr, s32 *value)
+{
+	struct wf_ad7417_priv *pv = sr->priv;
+	int chan = sr - pv->sensors;
+	int i, rc;
+	u8 buf[2];
+	u16 raw;
+
+	*value = 0;
+	mutex_lock(&pv->lock);
+	for (i = 0; i < 10; i++) {
+		/* Set channel */
+		buf[0] = 1;
+		buf[1] = (pv->config & 0x1f) | (chan << 5);
+		rc = i2c_master_send(pv->i2c, buf, 2);
+		if (rc < 0)
+			goto error;
+
+		/* Wait for conversion */
+		msleep(1);
+
+		/* Switch to data register */
+		buf[0] = 4;
+		rc = i2c_master_send(pv->i2c, buf, 1);
+		if (rc < 0)
+			goto error;
+
+		/* Read result */
+		rc = i2c_master_recv(pv->i2c, buf, 2);
+		if (rc < 0)
+			goto error;
+
+		/* Read a a 16-bit signed value */
+		raw = be16_to_cpup((__le16 *)buf) >> 6;
+		wf_ad7417_adc_convert(pv, chan, raw, value);
+
+		dev_vdbg(&pv->i2c->dev, "ADC chan %d [%s]"
+			 " raw value: 0x%x, conv to: 0x%08x\n",
+			 chan, sr->name, raw, *value);
+
+		mutex_unlock(&pv->lock);
+		return 0;
+
+	error:
+		dev_dbg(&pv->i2c->dev,
+			  "Error reading ADC, try %d...\n", i);
+		if (i < 9)
+			msleep(10);
+	}
+	mutex_unlock(&pv->lock);
+	return -1;
+}
+
+static void wf_ad7417_release(struct kref *ref)
+{
+	struct wf_ad7417_priv *pv = container_of(ref,
+						 struct wf_ad7417_priv, ref);
+	kfree(pv);
+}
+
+static void wf_ad7417_sensor_release(struct wf_sensor *sr)
+{
+	struct wf_ad7417_priv *pv = sr->priv;
+
+	kfree(sr->name);
+	kref_put(&pv->ref, wf_ad7417_release);
+}
+
+static const struct wf_sensor_ops wf_ad7417_temp_ops = {
+	.get_value	= wf_ad7417_temp_get,
+	.release	= wf_ad7417_sensor_release,
+	.owner		= THIS_MODULE,
+};
+
+static const struct wf_sensor_ops wf_ad7417_adc_ops = {
+	.get_value	= wf_ad7417_adc_get,
+	.release	= wf_ad7417_sensor_release,
+	.owner		= THIS_MODULE,
+};
+
+static void __devinit wf_ad7417_add_sensor(struct wf_ad7417_priv *pv,
+					   int index, const char *name,
+					   const struct wf_sensor_ops *ops)
+{
+	pv->sensors[index].name = kasprintf(GFP_KERNEL, "%s-%d", name, pv->cpu);
+	pv->sensors[index].priv = pv;
+	pv->sensors[index].ops = ops;
+	if (!wf_register_sensor(&pv->sensors[index]))
+		kref_get(&pv->ref);
+}
+
+static void __devinit wf_ad7417_init_chip(struct wf_ad7417_priv *pv)
+{
+	int rc;
+	u8 buf[2];
+	u8 config = 0;
+
+	/*
+	 * Read ADC the configuration register and cache it. We
+	 * also make sure Config2 contains proper values, I've seen
+	 * cases where we got stale grabage in there, thus preventing
+	 * proper reading of conv. values
+	 */
+
+	/* Clear Config2 */
+	buf[0] = 5;
+	buf[1] = 0;
+	i2c_master_send(pv->i2c, buf, 2);
+
+	/* Read & cache Config1 */
+	buf[0] = 1;
+	rc = i2c_master_send(pv->i2c, buf, 1);
+	if (rc > 0) {
+		rc = i2c_master_recv(pv->i2c, buf, 1);
+		if (rc > 0) {
+			config = buf[0];
+
+			dev_dbg(&pv->i2c->dev, "ADC config reg: %02x\n",
+				config);
+
+			/* Disable shutdown mode */
+			config &= 0xfe;
+			buf[0] = 1;
+			buf[1] = config;
+			rc = i2c_master_send(pv->i2c, buf, 2);
+		}
+	}
+	if (rc <= 0)
+		dev_err(&pv->i2c->dev, "Error reading ADC config\n");
+
+	pv->config = config;
+}
+
+static int __devinit wf_ad7417_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
+{
+	struct wf_ad7417_priv *pv;
+	const struct mpu_data *mpu;
+	const char *loc;
+	int cpu_nr;
+
+	loc = of_get_property(client->dev.of_node, "hwsensor-location", NULL);
+	if (!loc) {
+		dev_warn(&client->dev, "Missing hwsensor-location property!\n");
+		return -ENXIO;
+	}
+
+	/*
+	 * Identify which CPU we belong to by looking at the first entry
+	 * in the hwsensor-location list
+	 */
+	if (!strncmp(loc, "CPU A", 5))
+		cpu_nr = 0;
+	else if (!strncmp(loc, "CPU B", 5))
+		cpu_nr = 1;
+	else {
+		pr_err("wf_ad7417: Can't identify location %s\n", loc);
+		return -ENXIO;
+	}
+	mpu = wf_get_mpu(cpu_nr);
+	if (!mpu) {
+		dev_err(&client->dev, "Failed to retrieve MPU data\n");
+		return -ENXIO;
+	}
+
+	pv = kzalloc(sizeof(struct wf_ad7417_priv), GFP_KERNEL);
+	if (pv == NULL)
+		return -ENODEV;
+
+	kref_init(&pv->ref);
+	mutex_init(&pv->lock);
+	pv->i2c = client;
+	pv->cpu = cpu_nr;
+	pv->mpu = mpu;
+	dev_set_drvdata(&client->dev, pv);
+
+	/* Initialize the chip */
+	wf_ad7417_init_chip(pv);
+
+	/*
+	 * We cannot rely on Apple device-tree giving us child
+	 * node with the names of the individual sensors so we
+	 * just hard code what we know about them
+	 */
+	wf_ad7417_add_sensor(pv, 0, "cpu-amb-temp", &wf_ad7417_temp_ops);
+	wf_ad7417_add_sensor(pv, 1, "cpu-diode-temp", &wf_ad7417_adc_ops);
+	wf_ad7417_add_sensor(pv, 2, "cpu-12v-current", &wf_ad7417_adc_ops);
+	wf_ad7417_add_sensor(pv, 3, "cpu-voltage", &wf_ad7417_adc_ops);
+	wf_ad7417_add_sensor(pv, 4, "cpu-current", &wf_ad7417_adc_ops);
+
+	return 0;
+}
+
+static int __devexit wf_ad7417_remove(struct i2c_client *client)
+{
+	struct wf_ad7417_priv *pv = dev_get_drvdata(&client->dev);
+	int i;
+
+	/* Mark client detached */
+	pv->i2c = NULL;
+
+	/* Release sensor */
+	for (i = 0; i < 5; i++)
+		wf_unregister_sensor(&pv->sensors[i]);
+
+	kref_put(&pv->ref, wf_ad7417_release);
+
+	return 0;
+}
+
+static const struct i2c_device_id wf_ad7417_id[] = {
+	{ "MAC,ad7417", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wf_ad7417_id);
+
+static struct i2c_driver wf_ad7417_driver = {
+	.driver = {
+		.name	= "wf_ad7417",
+	},
+	.probe		= wf_ad7417_probe,
+	.remove		= wf_ad7417_remove,
+	.id_table	= wf_ad7417_id,
+};
+
+static int __devinit wf_ad7417_init(void)
+{
+	/* This is only supported on these machines */
+	if (!of_machine_is_compatible("PowerMac7,2") &&
+	    !of_machine_is_compatible("PowerMac7,3") &&
+	    !of_machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
+
+	return i2c_add_driver(&wf_ad7417_driver);
+}
+
+static void __devexit wf_ad7417_exit(void)
+{
+	i2c_del_driver(&wf_ad7417_driver);
+}
+
+module_init(wf_ad7417_init);
+module_exit(wf_ad7417_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("ad7417 sensor driver for PowerMacs");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index ce8897933a84..3ee198b65843 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -164,13 +164,27 @@ static ssize_t wf_show_control(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
 	struct wf_control *ctrl = container_of(attr, struct wf_control, attr);
+	const char *typestr;
 	s32 val = 0;
 	int err;
 
 	err = ctrl->ops->get_value(ctrl, &val);
-	if (err < 0)
+	if (err < 0) {
+		if (err == -EFAULT)
+			return sprintf(buf, "<HW FAULT>\n");
 		return err;
-	return sprintf(buf, "%d\n", val);
+	}
+	switch(ctrl->type) {
+	case WF_CONTROL_RPM_FAN:
+		typestr = " RPM";
+		break;
+	case WF_CONTROL_PWM_FAN:
+		typestr = " %";
+		break;
+	default:
+		typestr = "";
+	}
+	return sprintf(buf, "%d%s\n", val, typestr);
 }
 
 /* This is really only for debugging... */
@@ -470,11 +484,6 @@ static int __init windfarm_core_init(void)
 {
 	DBG("wf: core loaded\n");
 
-	/* Don't register on old machines that use therm_pm72 for now */
-	if (of_machine_is_compatible("PowerMac7,2") ||
-	    of_machine_is_compatible("PowerMac7,3") ||
-	    of_machine_is_compatible("RackMac3,1"))
-		return -ENODEV;
 	platform_device_register(&wf_platform_device);
 	return 0;
 }
diff --git a/drivers/macintosh/windfarm_cpufreq_clamp.c b/drivers/macintosh/windfarm_cpufreq_clamp.c
index 1a77a7c97d0e..72d1fdfe02a5 100644
--- a/drivers/macintosh/windfarm_cpufreq_clamp.c
+++ b/drivers/macintosh/windfarm_cpufreq_clamp.c
@@ -75,12 +75,6 @@ static int __init wf_cpufreq_clamp_init(void)
 {
 	struct wf_control *clamp;
 
-	/* Don't register on old machines that use therm_pm72 for now */
-	if (of_machine_is_compatible("PowerMac7,2") ||
-	    of_machine_is_compatible("PowerMac7,3") ||
-	    of_machine_is_compatible("RackMac3,1"))
-		return -ENODEV;
-
 	clamp = kmalloc(sizeof(struct wf_control), GFP_KERNEL);
 	if (clamp == NULL)
 		return -ENOMEM;
diff --git a/drivers/macintosh/windfarm_fcu_controls.c b/drivers/macintosh/windfarm_fcu_controls.c
new file mode 100644
index 000000000000..b3411edb324b
--- /dev/null
+++ b/drivers/macintosh/windfarm_fcu_controls.c
@@ -0,0 +1,613 @@
+/*
+ * Windfarm PowerMac thermal control. FCU fan control
+ *
+ * Copyright 2012 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * Released under the term of the GNU GPL v2.
+ */
+#undef DEBUG
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/i2c.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+#include "windfarm.h"
+#include "windfarm_mpu.h"
+
+#define VERSION "1.0"
+
+#ifdef DEBUG
+#define DBG(args...)	printk(args)
+#else
+#define DBG(args...)	do { } while(0)
+#endif
+
+/*
+ * This option is "weird" :) Basically, if you define this to 1
+ * the control loop for the RPMs fans (not PWMs) will apply the
+ * correction factor obtained from the PID to the actual RPM
+ * speed read from the FCU.
+ *
+ * If you define the below constant to 0, then it will be
+ * applied to the setpoint RPM speed, that is basically the
+ * speed we proviously "asked" for.
+ *
+ * I'm using 0 for now which is what therm_pm72 used to do and
+ * what Darwin -apparently- does based on observed behaviour.
+ */
+#define RPM_PID_USE_ACTUAL_SPEED	0
+
+/* Default min/max for pumps */
+#define CPU_PUMP_OUTPUT_MAX		3200
+#define CPU_PUMP_OUTPUT_MIN		1250
+
+#define FCU_FAN_RPM		0
+#define FCU_FAN_PWM		1
+
+struct wf_fcu_priv {
+	struct kref		ref;
+	struct i2c_client	*i2c;
+	struct mutex		lock;
+	struct list_head	fan_list;
+	int			rpm_shift;
+};
+
+struct wf_fcu_fan {
+	struct list_head	link;
+	int			id;
+	s32			min, max, target;
+	struct wf_fcu_priv	*fcu_priv;
+	struct wf_control	ctrl;
+};
+
+static void wf_fcu_release(struct kref *ref)
+{
+	struct wf_fcu_priv *pv = container_of(ref, struct wf_fcu_priv, ref);
+
+	kfree(pv);
+}
+
+static void wf_fcu_fan_release(struct wf_control *ct)
+{
+	struct wf_fcu_fan *fan = ct->priv;
+
+	kref_put(&fan->fcu_priv->ref, wf_fcu_release);
+	kfree(fan);
+}
+
+static int wf_fcu_read_reg(struct wf_fcu_priv *pv, int reg,
+			   unsigned char *buf, int nb)
+{
+	int tries, nr, nw;
+
+	mutex_lock(&pv->lock);
+
+	buf[0] = reg;
+	tries = 0;
+	for (;;) {
+		nw = i2c_master_send(pv->i2c, buf, 1);
+		if (nw > 0 || (nw < 0 && nw != -EIO) || tries >= 100)
+			break;
+		msleep(10);
+		++tries;
+	}
+	if (nw <= 0) {
+		pr_err("Failure writing address to FCU: %d", nw);
+		nr = nw;
+		goto bail;
+	}
+	tries = 0;
+	for (;;) {
+		nr = i2c_master_recv(pv->i2c, buf, nb);
+		if (nr > 0 || (nr < 0 && nr != -ENODEV) || tries >= 100)
+			break;
+		msleep(10);
+		++tries;
+	}
+	if (nr <= 0)
+		pr_err("wf_fcu: Failure reading data from FCU: %d", nw);
+ bail:
+	mutex_unlock(&pv->lock);
+	return nr;
+}
+
+static int wf_fcu_write_reg(struct wf_fcu_priv *pv, int reg,
+			    const unsigned char *ptr, int nb)
+{
+	int tries, nw;
+	unsigned char buf[16];
+
+	buf[0] = reg;
+	memcpy(buf+1, ptr, nb);
+	++nb;
+	tries = 0;
+	for (;;) {
+		nw = i2c_master_send(pv->i2c, buf, nb);
+		if (nw > 0 || (nw < 0 && nw != -EIO) || tries >= 100)
+			break;
+		msleep(10);
+		++tries;
+	}
+	if (nw < 0)
+		pr_err("wf_fcu: Failure writing to FCU: %d", nw);
+	return nw;
+}
+
+static int wf_fcu_fan_set_rpm(struct wf_control *ct, s32 value)
+{
+	struct wf_fcu_fan *fan = ct->priv;
+	struct wf_fcu_priv *pv = fan->fcu_priv;
+	int rc, shift = pv->rpm_shift;
+	unsigned char buf[2];
+
+	if (value < fan->min)
+		value = fan->min;
+	if (value > fan->max)
+		value = fan->max;
+
+	fan->target = value;
+
+	buf[0] = value >> (8 - shift);
+	buf[1] = value << shift;
+	rc = wf_fcu_write_reg(pv, 0x10 + (fan->id * 2), buf, 2);
+	if (rc < 0)
+		return -EIO;
+	return 0;
+}
+
+static int wf_fcu_fan_get_rpm(struct wf_control *ct, s32 *value)
+{
+	struct wf_fcu_fan *fan = ct->priv;
+	struct wf_fcu_priv *pv = fan->fcu_priv;
+	int rc, reg_base, shift = pv->rpm_shift;
+	unsigned char failure;
+	unsigned char active;
+	unsigned char buf[2];
+
+	rc = wf_fcu_read_reg(pv, 0xb, &failure, 1);
+	if (rc != 1)
+		return -EIO;
+	if ((failure & (1 << fan->id)) != 0)
+		return -EFAULT;
+	rc = wf_fcu_read_reg(pv, 0xd, &active, 1);
+	if (rc != 1)
+		return -EIO;
+	if ((active & (1 << fan->id)) == 0)
+		return -ENXIO;
+
+	/* Programmed value or real current speed */
+#if RPM_PID_USE_ACTUAL_SPEED
+	reg_base = 0x11;
+#else
+	reg_base = 0x10;
+#endif
+	rc = wf_fcu_read_reg(pv, reg_base + (fan->id * 2), buf, 2);
+	if (rc != 2)
+		return -EIO;
+
+	*value = (buf[0] << (8 - shift)) | buf[1] >> shift;
+
+	return 0;
+}
+
+static int wf_fcu_fan_set_pwm(struct wf_control *ct, s32 value)
+{
+	struct wf_fcu_fan *fan = ct->priv;
+	struct wf_fcu_priv *pv = fan->fcu_priv;
+	unsigned char buf[2];
+	int rc;
+
+	if (value < fan->min)
+		value = fan->min;
+	if (value > fan->max)
+		value = fan->max;
+
+	fan->target = value;
+
+	value = (value * 2559) / 1000;
+	buf[0] = value;
+	rc = wf_fcu_write_reg(pv, 0x30 + (fan->id * 2), buf, 1);
+	if (rc < 0)
+		return -EIO;
+	return 0;
+}
+
+static int wf_fcu_fan_get_pwm(struct wf_control *ct, s32 *value)
+{
+	struct wf_fcu_fan *fan = ct->priv;
+	struct wf_fcu_priv *pv = fan->fcu_priv;
+	unsigned char failure;
+	unsigned char active;
+	unsigned char buf[2];
+	int rc;
+
+	rc = wf_fcu_read_reg(pv, 0x2b, &failure, 1);
+	if (rc != 1)
+		return -EIO;
+	if ((failure & (1 << fan->id)) != 0)
+		return -EFAULT;
+	rc = wf_fcu_read_reg(pv, 0x2d, &active, 1);
+	if (rc != 1)
+		return -EIO;
+	if ((active & (1 << fan->id)) == 0)
+		return -ENXIO;
+
+	rc = wf_fcu_read_reg(pv, 0x30 + (fan->id * 2), buf, 1);
+	if (rc != 1)
+		return -EIO;
+
+	*value = (((s32)buf[0]) * 1000) / 2559;
+
+	return 0;
+}
+
+static s32 wf_fcu_fan_min(struct wf_control *ct)
+{
+	struct wf_fcu_fan *fan = ct->priv;
+
+	return fan->min;
+}
+
+static s32 wf_fcu_fan_max(struct wf_control *ct)
+{
+	struct wf_fcu_fan *fan = ct->priv;
+
+	return fan->max;
+}
+
+static const struct wf_control_ops wf_fcu_fan_rpm_ops = {
+	.set_value	= wf_fcu_fan_set_rpm,
+	.get_value	= wf_fcu_fan_get_rpm,
+	.get_min	= wf_fcu_fan_min,
+	.get_max	= wf_fcu_fan_max,
+	.release	= wf_fcu_fan_release,
+	.owner		= THIS_MODULE,
+};
+
+static const struct wf_control_ops wf_fcu_fan_pwm_ops = {
+	.set_value	= wf_fcu_fan_set_pwm,
+	.get_value	= wf_fcu_fan_get_pwm,
+	.get_min	= wf_fcu_fan_min,
+	.get_max	= wf_fcu_fan_max,
+	.release	= wf_fcu_fan_release,
+	.owner		= THIS_MODULE,
+};
+
+static void __devinit wf_fcu_get_pump_minmax(struct wf_fcu_fan *fan)
+{
+	const struct mpu_data *mpu = wf_get_mpu(0);
+	u16 pump_min = 0, pump_max = 0xffff;
+	u16 tmp[4];
+
+	/* Try to fetch pumps min/max infos from eeprom */
+	if (mpu) {
+		memcpy(&tmp, mpu->processor_part_num, 8);
+		if (tmp[0] != 0xffff && tmp[1] != 0xffff) {
+			pump_min = max(pump_min, tmp[0]);
+			pump_max = min(pump_max, tmp[1]);
+		}
+		if (tmp[2] != 0xffff && tmp[3] != 0xffff) {
+			pump_min = max(pump_min, tmp[2]);
+			pump_max = min(pump_max, tmp[3]);
+		}
+	}
+
+	/* Double check the values, this _IS_ needed as the EEPROM on
+	 * some dual 2.5Ghz G5s seem, at least, to have both min & max
+	 * same to the same value ... (grrrr)
+	 */
+	if (pump_min == pump_max || pump_min == 0 || pump_max == 0xffff) {
+		pump_min = CPU_PUMP_OUTPUT_MIN;
+		pump_max = CPU_PUMP_OUTPUT_MAX;
+	}
+
+	fan->min = pump_min;
+	fan->max = pump_max;
+
+	DBG("wf_fcu: pump min/max for %s set to: [%d..%d] RPM\n",
+	    fan->ctrl.name, pump_min, pump_max);
+}
+
+static void __devinit wf_fcu_get_rpmfan_minmax(struct wf_fcu_fan *fan)
+{
+	struct wf_fcu_priv *pv = fan->fcu_priv;
+	const struct mpu_data *mpu0 = wf_get_mpu(0);
+	const struct mpu_data *mpu1 = wf_get_mpu(1);
+
+	/* Default */
+	fan->min = 2400 >> pv->rpm_shift;
+	fan->max = 56000 >> pv->rpm_shift;
+
+	/* CPU fans have min/max in MPU */
+	if (mpu0 && !strcmp(fan->ctrl.name, "cpu-front-fan-0")) {
+		fan->min = max(fan->min, (s32)mpu0->rminn_intake_fan);
+		fan->max = min(fan->max, (s32)mpu0->rmaxn_intake_fan);
+		goto bail;
+	}
+	if (mpu1 && !strcmp(fan->ctrl.name, "cpu-front-fan-1")) {
+		fan->min = max(fan->min, (s32)mpu1->rminn_intake_fan);
+		fan->max = min(fan->max, (s32)mpu1->rmaxn_intake_fan);
+		goto bail;
+	}
+	if (mpu0 && !strcmp(fan->ctrl.name, "cpu-rear-fan-0")) {
+		fan->min = max(fan->min, (s32)mpu0->rminn_exhaust_fan);
+		fan->max = min(fan->max, (s32)mpu0->rmaxn_exhaust_fan);
+		goto bail;
+	}
+	if (mpu1 && !strcmp(fan->ctrl.name, "cpu-rear-fan-1")) {
+		fan->min = max(fan->min, (s32)mpu1->rminn_exhaust_fan);
+		fan->max = min(fan->max, (s32)mpu1->rmaxn_exhaust_fan);
+		goto bail;
+	}
+	/* Rackmac variants, we just use mpu0 intake */
+	if (!strncmp(fan->ctrl.name, "cpu-fan", 7)) {
+		fan->min = max(fan->min, (s32)mpu0->rminn_intake_fan);
+		fan->max = min(fan->max, (s32)mpu0->rmaxn_intake_fan);
+		goto bail;
+	}
+ bail:
+	DBG("wf_fcu: fan min/max for %s set to: [%d..%d] RPM\n",
+	    fan->ctrl.name, fan->min, fan->max);
+}
+
+static void __devinit wf_fcu_add_fan(struct wf_fcu_priv *pv,
+				     const char *name,
+				     int type, int id)
+{
+	struct wf_fcu_fan *fan;
+
+	fan = kzalloc(sizeof(*fan), GFP_KERNEL);
+	if (!fan)
+		return;
+	fan->fcu_priv = pv;
+	fan->id = id;
+	fan->ctrl.name = name;
+	fan->ctrl.priv = fan;
+
+	/* min/max is oddball but the code comes from
+	 * therm_pm72 which seems to work so ...
+	 */
+	if (type == FCU_FAN_RPM) {
+		if (!strncmp(name, "cpu-pump", strlen("cpu-pump")))
+			wf_fcu_get_pump_minmax(fan);
+		else
+			wf_fcu_get_rpmfan_minmax(fan);
+		fan->ctrl.type = WF_CONTROL_RPM_FAN;
+		fan->ctrl.ops = &wf_fcu_fan_rpm_ops;
+	} else {
+		fan->min = 10;
+		fan->max = 100;
+		fan->ctrl.type = WF_CONTROL_PWM_FAN;
+		fan->ctrl.ops = &wf_fcu_fan_pwm_ops;
+	}
+
+	if (wf_register_control(&fan->ctrl)) {
+		pr_err("wf_fcu: Failed to register fan %s\n", name);
+		kfree(fan);
+		return;
+	}
+	list_add(&fan->link, &pv->fan_list);
+	kref_get(&pv->ref);
+}
+
+static void __devinit wf_fcu_lookup_fans(struct wf_fcu_priv *pv)
+{
+	/* Translation of device-tree location properties to
+	 * windfarm fan names
+	 */
+	static const struct {
+		const char *dt_name;	/* Device-tree name */
+		const char *ct_name;	/* Control name */
+	} loc_trans[] = {
+		{ "BACKSIDE",		"backside-fan",		},
+		{ "SYS CTRLR FAN",	"backside-fan",		},
+		{ "DRIVE BAY",		"drive-bay-fan",	},
+		{ "SLOT",		"slots-fan",		},
+		{ "PCI FAN",		"slots-fan",		},
+		{ "CPU A INTAKE",	"cpu-front-fan-0",	},
+		{ "CPU A EXHAUST",	"cpu-rear-fan-0",	},
+		{ "CPU B INTAKE",	"cpu-front-fan-1",	},
+		{ "CPU B EXHAUST",	"cpu-rear-fan-1",	},
+		{ "CPU A PUMP",		"cpu-pump-0",		},
+		{ "CPU B PUMP",		"cpu-pump-1",		},
+		{ "CPU A 1",		"cpu-fan-a-0",		},
+		{ "CPU A 2",		"cpu-fan-b-0",		},
+		{ "CPU A 3",		"cpu-fan-c-0",		},
+		{ "CPU B 1",		"cpu-fan-a-1",		},
+		{ "CPU B 2",		"cpu-fan-b-1",		},
+		{ "CPU B 3",		"cpu-fan-c-1",		},
+	};
+	struct device_node *np = NULL, *fcu = pv->i2c->dev.of_node;
+	int i;
+
+	DBG("Looking up FCU controls in device-tree...\n");
+
+	while ((np = of_get_next_child(fcu, np)) != NULL) {
+		int id, type = -1;
+		const char *loc;
+		const char *name;
+		const u32 *reg;
+
+		DBG(" control: %s, type: %s\n", np->name, np->type);
+
+		/* Detect control type */
+		if (!strcmp(np->type, "fan-rpm-control") ||
+		    !strcmp(np->type, "fan-rpm"))
+			type = FCU_FAN_RPM;
+		if (!strcmp(np->type, "fan-pwm-control") ||
+		    !strcmp(np->type, "fan-pwm"))
+			type = FCU_FAN_PWM;
+		/* Only care about fans for now */
+		if (type == -1)
+			continue;
+
+		/* Lookup for a matching location */
+		loc = of_get_property(np, "location", NULL);
+		reg = of_get_property(np, "reg", NULL);
+		if (loc == NULL || reg == NULL)
+			continue;
+		DBG(" matching location: %s, reg: 0x%08x\n", loc, *reg);
+
+		for (i = 0; i < ARRAY_SIZE(loc_trans); i++) {
+			if (strncmp(loc, loc_trans[i].dt_name,
+				    strlen(loc_trans[i].dt_name)))
+				continue;
+			name = loc_trans[i].ct_name;
+
+			DBG(" location match, name: %s\n", name);
+
+			if (type == FCU_FAN_RPM)
+				id = ((*reg) - 0x10) / 2;
+			else
+				id = ((*reg) - 0x30) / 2;
+			if (id > 7) {
+				pr_warning("wf_fcu: Can't parse "
+				       "fan ID in device-tree for %s\n",
+					   np->full_name);
+				break;
+			}
+			wf_fcu_add_fan(pv, name, type, id);
+			break;
+		}
+	}
+}
+
+static void __devinit wf_fcu_default_fans(struct wf_fcu_priv *pv)
+{
+	/* We only support the default fans for PowerMac7,2 */
+	if (!of_machine_is_compatible("PowerMac7,2"))
+		return;
+
+	wf_fcu_add_fan(pv, "backside-fan",	FCU_FAN_PWM, 1);
+	wf_fcu_add_fan(pv, "drive-bay-fan",	FCU_FAN_RPM, 2);
+	wf_fcu_add_fan(pv, "slots-fan",		FCU_FAN_PWM, 2);
+	wf_fcu_add_fan(pv, "cpu-front-fan-0",	FCU_FAN_RPM, 3);
+	wf_fcu_add_fan(pv, "cpu-rear-fan-0",	FCU_FAN_RPM, 4);
+	wf_fcu_add_fan(pv, "cpu-front-fan-1",	FCU_FAN_RPM, 5);
+	wf_fcu_add_fan(pv, "cpu-rear-fan-1",	FCU_FAN_RPM, 6);
+}
+
+static int __devinit wf_fcu_init_chip(struct wf_fcu_priv *pv)
+{
+	unsigned char buf = 0xff;
+	int rc;
+
+	rc = wf_fcu_write_reg(pv, 0xe, &buf, 1);
+	if (rc < 0)
+		return -EIO;
+	rc = wf_fcu_write_reg(pv, 0x2e, &buf, 1);
+	if (rc < 0)
+		return -EIO;
+	rc = wf_fcu_read_reg(pv, 0, &buf, 1);
+	if (rc < 0)
+		return -EIO;
+	pv->rpm_shift = (buf == 1) ? 2 : 3;
+
+	pr_debug("wf_fcu: FCU Initialized, RPM fan shift is %d\n",
+		 pv->rpm_shift);
+
+	return 0;
+}
+
+static int __devinit wf_fcu_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct wf_fcu_priv *pv;
+
+	pv = kzalloc(sizeof(*pv), GFP_KERNEL);
+	if (!pv)
+		return -ENOMEM;
+
+	kref_init(&pv->ref);
+	mutex_init(&pv->lock);
+	INIT_LIST_HEAD(&pv->fan_list);
+	pv->i2c = client;
+
+	/*
+	 * First we must start the FCU which will query the
+	 * shift value to apply to RPMs
+	 */
+	if (wf_fcu_init_chip(pv)) {
+		pr_err("wf_fcu: Initialization failed !\n");
+		kfree(pv);
+		return -ENXIO;
+	}
+
+	/* First lookup fans in the device-tree */
+	wf_fcu_lookup_fans(pv);
+
+	/*
+	 * Older machines don't have the device-tree entries
+	 * we are looking for, just hard code the list
+	 */
+	if (list_empty(&pv->fan_list))
+		wf_fcu_default_fans(pv);
+
+	/* Still no fans ? FAIL */
+	if (list_empty(&pv->fan_list)) {
+		pr_err("wf_fcu: Failed to find fans for your machine\n");
+		kfree(pv);
+		return -ENODEV;
+	}
+
+	dev_set_drvdata(&client->dev, pv);
+
+	return 0;
+}
+
+static int __devexit wf_fcu_remove(struct i2c_client *client)
+{
+	struct wf_fcu_priv *pv = dev_get_drvdata(&client->dev);
+	struct wf_fcu_fan *fan;
+
+	while (!list_empty(&pv->fan_list)) {
+		fan = list_first_entry(&pv->fan_list, struct wf_fcu_fan, link);
+		list_del(&fan->link);
+		wf_unregister_control(&fan->ctrl);
+	}
+	kref_put(&pv->ref, wf_fcu_release);
+	return 0;
+}
+
+static const struct i2c_device_id wf_fcu_id[] = {
+	{ "MAC,fcu", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wf_fcu_id);
+
+static struct i2c_driver wf_fcu_driver = {
+	.driver = {
+		.name	= "wf_fcu",
+	},
+	.probe		= wf_fcu_probe,
+	.remove		= wf_fcu_remove,
+	.id_table	= wf_fcu_id,
+};
+
+static int __init wf_fcu_init(void)
+{
+	return i2c_add_driver(&wf_fcu_driver);
+}
+
+static void __exit wf_fcu_exit(void)
+{
+	i2c_del_driver(&wf_fcu_driver);
+}
+
+
+module_init(wf_fcu_init);
+module_exit(wf_fcu_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("FCU control objects for PowerMacs thermal control");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 4d6a90a1372b..b0c2d3695b34 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -23,7 +23,7 @@
 
 #include "windfarm.h"
 
-#define VERSION "0.2"
+#define VERSION "1.0"
 
 #undef DEBUG
 
@@ -36,8 +36,8 @@
 struct wf_lm75_sensor {
 	int			ds1775 : 1;
 	int			inited : 1;
-	struct 	i2c_client	*i2c;
-	struct 	wf_sensor	sens;
+	struct i2c_client	*i2c;
+	struct wf_sensor	sens;
 };
 #define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens)
 
@@ -90,40 +90,19 @@ static struct wf_sensor_ops wf_lm75_ops = {
 
 static int wf_lm75_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
-{
+{	
 	struct wf_lm75_sensor *lm;
-	int rc;
-
-	lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
-	if (lm == NULL)
-		return -ENODEV;
-
-	lm->inited = 0;
-	lm->ds1775 = id->driver_data;
-	lm->i2c = client;
-	lm->sens.name = client->dev.platform_data;
-	lm->sens.ops = &wf_lm75_ops;
-	i2c_set_clientdata(client, lm);
-
-	rc = wf_register_sensor(&lm->sens);
-	if (rc)
-		kfree(lm);
-
-	return rc;
-}
-
-static struct i2c_driver wf_lm75_driver;
-
-static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
-					     u8 addr, int ds1775,
-					     const char *loc)
-{
-	struct i2c_board_info info;
-	struct i2c_client *client;
-	char *name;
+	int rc, ds1775 = id->driver_data;
+	const char *name, *loc;
 
 	DBG("wf_lm75: creating  %s device at address 0x%02x\n",
-	    ds1775 ? "ds1775" : "lm75", addr);
+	    ds1775 ? "ds1775" : "lm75", client->addr);
+
+	loc = of_get_property(client->dev.of_node, "hwsensor-location", NULL);
+	if (!loc) {
+		dev_warn(&client->dev, "Missing hwsensor-location property!\n");
+		return -ENXIO;
+	}
 
 	/* Usual rant about sensor names not beeing very consistent in
 	 * the device-tree, oh well ...
@@ -137,68 +116,31 @@ static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
 		name = "optical-drive-temp";
 	else if (!strcmp(loc, "HD Temp"))
 		name = "hard-drive-temp";
+	else if (!strcmp(loc, "PCI SLOTS"))
+		name = "slots-temp";
+	else if (!strcmp(loc, "CPU A INLET"))
+		name = "cpu-inlet-temp-0";
+	else if (!strcmp(loc, "CPU B INLET"))
+		name = "cpu-inlet-temp-1";
 	else
-		goto fail;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = (addr >> 1) & 0x7f;
-	info.platform_data = name;
-	strlcpy(info.type, ds1775 ? "wf_ds1775" : "wf_lm75", I2C_NAME_SIZE);
-
-	client = i2c_new_device(adapter, &info);
-	if (client == NULL) {
-		printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n",
-		       ds1775 ? "ds1775" : "lm75", name);
-		goto fail;
-	}
-
-	/*
-	 * Let i2c-core delete that device on driver removal.
-	 * This is safe because i2c-core holds the core_lock mutex for us.
-	 */
-	list_add_tail(&client->detected, &wf_lm75_driver.clients);
-	return client;
- fail:
-	return NULL;
-}
-
-static int wf_lm75_attach(struct i2c_adapter *adapter)
-{
-	struct device_node *busnode, *dev;
-	struct pmac_i2c_bus *bus;
+		return -ENXIO;
+ 	
 
-	DBG("wf_lm75: adapter %s detected\n", adapter->name);
-
-	bus = pmac_i2c_adapter_to_bus(adapter);
-	if (bus == NULL)
+	lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL);
+	if (lm == NULL)
 		return -ENODEV;
-	busnode = pmac_i2c_get_bus_node(bus);
 
-	DBG("wf_lm75: bus found, looking for device...\n");
-
-	/* Now look for lm75(s) in there */
-	for (dev = NULL;
-	     (dev = of_get_next_child(busnode, dev)) != NULL;) {
-		const char *loc =
-			of_get_property(dev, "hwsensor-location", NULL);
-		u8 addr;
+	lm->inited = 0;
+	lm->ds1775 = ds1775;
+	lm->i2c = client;
+	lm->sens.name = (char *)name; /* XXX fix constness in structure */
+	lm->sens.ops = &wf_lm75_ops;
+	i2c_set_clientdata(client, lm);
 
-		/* We must re-match the adapter in order to properly check
-		 * the channel on multibus setups
-		 */
-		if (!pmac_i2c_match_adapter(dev, adapter))
-			continue;
-		addr = pmac_i2c_get_dev_addr(dev);
-		if (loc == NULL || addr == 0)
-			continue;
-		/* real lm75 */
-		if (of_device_is_compatible(dev, "lm75"))
-			wf_lm75_create(adapter, addr, 0, loc);
-		/* ds1775 (compatible, better resolution */
-		else if (of_device_is_compatible(dev, "ds1775"))
-			wf_lm75_create(adapter, addr, 1, loc);
-	}
-	return 0;
+	rc = wf_register_sensor(&lm->sens);
+	if (rc)
+		kfree(lm);
+	return rc;
 }
 
 static int wf_lm75_remove(struct i2c_client *client)
@@ -217,16 +159,16 @@ static int wf_lm75_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id wf_lm75_id[] = {
-	{ "wf_lm75", 0 },
-	{ "wf_ds1775", 1 },
+	{ "MAC,lm75", 0 },
+	{ "MAC,ds1775", 1 },
 	{ }
 };
+MODULE_DEVICE_TABLE(i2c, wf_lm75_id);
 
 static struct i2c_driver wf_lm75_driver = {
 	.driver = {
 		.name	= "wf_lm75",
 	},
-	.attach_adapter	= wf_lm75_attach,
 	.probe		= wf_lm75_probe,
 	.remove		= wf_lm75_remove,
 	.id_table	= wf_lm75_id,
@@ -234,11 +176,6 @@ static struct i2c_driver wf_lm75_driver = {
 
 static int __init wf_lm75_sensor_init(void)
 {
-	/* Don't register on old machines that use therm_pm72 for now */
-	if (of_machine_is_compatible("PowerMac7,2") ||
-	    of_machine_is_compatible("PowerMac7,3") ||
-	    of_machine_is_compatible("RackMac3,1"))
-		return -ENODEV;
 	return i2c_add_driver(&wf_lm75_driver);
 }
 
diff --git a/drivers/macintosh/windfarm_lm87_sensor.c b/drivers/macintosh/windfarm_lm87_sensor.c
new file mode 100644
index 000000000000..c071aab79dd1
--- /dev/null
+++ b/drivers/macintosh/windfarm_lm87_sensor.c
@@ -0,0 +1,201 @@
+/*
+ * Windfarm PowerMac thermal control. LM87 sensor
+ *
+ * Copyright 2012 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * Released under the term of the GNU GPL v2.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/i2c.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+#include <asm/pmac_low_i2c.h>
+
+#include "windfarm.h"
+
+#define VERSION "1.0"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(args...)	printk(args)
+#else
+#define DBG(args...)	do { } while(0)
+#endif
+
+struct wf_lm87_sensor {
+	struct i2c_client	*i2c;
+	struct wf_sensor	sens;
+};
+#define wf_to_lm87(c) container_of(c, struct wf_lm87_sensor, sens)
+
+
+static int wf_lm87_read_reg(struct i2c_client *chip, int reg)
+{
+	int rc, tries = 0;
+	u8 buf;
+
+	for (;;) {
+		/* Set address */
+		buf = (u8)reg;
+		rc = i2c_master_send(chip, &buf, 1);
+		if (rc <= 0)
+			goto error;
+		rc = i2c_master_recv(chip, &buf, 1);
+		if (rc <= 0)
+			goto error;
+		return (int)buf;
+	error:
+		DBG("wf_lm87: Error reading LM87, retrying...\n");
+		if (++tries > 10) {
+			printk(KERN_ERR "wf_lm87: Error reading LM87 !\n");
+			return -EIO;
+		}
+		msleep(10);
+	}
+}
+
+static int wf_lm87_get(struct wf_sensor *sr, s32 *value)
+{
+	struct wf_lm87_sensor *lm = sr->priv;
+	s32 temp;
+
+	if (lm->i2c == NULL)
+		return -ENODEV;
+
+#define LM87_INT_TEMP		0x27
+
+	/* Read temperature register */
+	temp = wf_lm87_read_reg(lm->i2c, LM87_INT_TEMP);
+	if (temp < 0)
+		return temp;
+	*value = temp << 16;
+
+	return 0;
+}
+
+static void wf_lm87_release(struct wf_sensor *sr)
+{
+	struct wf_lm87_sensor *lm = wf_to_lm87(sr);
+
+	kfree(lm);
+}
+
+static struct wf_sensor_ops wf_lm87_ops = {
+	.get_value	= wf_lm87_get,
+	.release	= wf_lm87_release,
+	.owner		= THIS_MODULE,
+};
+
+static int wf_lm87_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{	
+	struct wf_lm87_sensor *lm;
+	const char *name = NULL, *loc;
+	struct device_node *np = NULL;
+	int rc;
+
+	/*
+	 * The lm87 contains a whole pile of sensors, additionally,
+	 * the Xserve G5 has several lm87's. However, for now we only
+	 * care about the internal temperature sensor
+	 */
+	while ((np = of_get_next_child(client->dev.of_node, np)) != NULL) {
+		if (strcmp(np->name, "int-temp"))
+			continue;
+		loc = of_get_property(np, "location", NULL);
+		if (!loc)
+			continue;
+		if (strstr(loc, "DIMM"))
+			name = "dimms-temp";
+		else if (strstr(loc, "Processors"))
+			name = "between-cpus-temp";
+		if (name) {
+			of_node_put(np);
+			break;
+		}
+	}
+	if (!name) {
+		pr_warning("wf_lm87: Unsupported sensor %s\n",
+			   client->dev.of_node->full_name);
+		return -ENODEV;
+	}
+
+	lm = kzalloc(sizeof(struct wf_lm87_sensor), GFP_KERNEL);
+	if (lm == NULL)
+		return -ENODEV;
+
+	lm->i2c = client;
+	lm->sens.name = name;
+	lm->sens.ops = &wf_lm87_ops;
+	lm->sens.priv = lm;
+	i2c_set_clientdata(client, lm);
+
+	rc = wf_register_sensor(&lm->sens);
+	if (rc)
+		kfree(lm);
+	return rc;
+}
+
+static int wf_lm87_remove(struct i2c_client *client)
+{
+	struct wf_lm87_sensor *lm = i2c_get_clientdata(client);
+
+	DBG("wf_lm87: i2c detatch called for %s\n", lm->sens.name);
+
+	/* Mark client detached */
+	lm->i2c = NULL;
+
+	/* release sensor */
+	wf_unregister_sensor(&lm->sens);
+
+	return 0;
+}
+
+static const struct i2c_device_id wf_lm87_id[] = {
+	{ "MAC,lm87cimt", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wf_lm87_id);
+
+static struct i2c_driver wf_lm87_driver = {
+	.driver = {
+		.name	= "wf_lm87",
+	},
+	.probe		= wf_lm87_probe,
+	.remove		= wf_lm87_remove,
+	.id_table	= wf_lm87_id,
+};
+
+static int __init wf_lm87_sensor_init(void)
+{
+	/* We only support this on the Xserve */
+	if (!of_machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
+
+	return i2c_add_driver(&wf_lm87_driver);
+}
+
+static void __exit wf_lm87_sensor_exit(void)
+{
+	i2c_del_driver(&wf_lm87_driver);
+}
+
+
+module_init(wf_lm87_sensor_init);
+module_exit(wf_lm87_sensor_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("LM87 sensor objects for PowerMacs thermal control");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index 8204113268f4..371b058d2f7d 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -16,7 +16,7 @@
 
 #include "windfarm.h"
 
-#define VERSION "0.2"
+#define VERSION "1.0"
 
 /* This currently only exports the external temperature sensor,
    since that's all the control loops need. */
@@ -64,9 +64,29 @@ static struct wf_sensor_ops wf_max6690_ops = {
 static int wf_max6690_probe(struct i2c_client *client,
 			    const struct i2c_device_id *id)
 {
+	const char *name, *loc;
 	struct wf_6690_sensor *max;
 	int rc;
 
+	loc = of_get_property(client->dev.of_node, "hwsensor-location", NULL);
+	if (!loc) {
+		dev_warn(&client->dev, "Missing hwsensor-location property!\n");
+		return -ENXIO;
+	}
+
+	/*
+	 * We only expose the external temperature register for
+	 * now as this is all we need for our control loops
+	 */
+	if (!strcmp(loc, "BACKSIDE") || !strcmp(loc, "SYS CTRLR AMBIENT"))
+		name = "backside-temp";
+	else if (!strcmp(loc, "NB Ambient"))
+		name = "north-bridge-temp";
+	else if (!strcmp(loc, "GPU Ambient"))
+		name = "gpu-temp";
+	else
+		return -ENXIO;
+
 	max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL);
 	if (max == NULL) {
 		printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor: "
@@ -75,90 +95,16 @@ static int wf_max6690_probe(struct i2c_client *client,
 	}
 
 	max->i2c = client;
-	max->sens.name = client->dev.platform_data;
+	max->sens.name = (char *)name; /* XXX fix constness in structure */
 	max->sens.ops = &wf_max6690_ops;
 	i2c_set_clientdata(client, max);
 
 	rc = wf_register_sensor(&max->sens);
-	if (rc) {
+	if (rc)
 		kfree(max);
-	}
-
 	return rc;
 }
 
-static struct i2c_driver wf_max6690_driver;
-
-static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
-					    u8 addr, const char *loc)
-{
-	struct i2c_board_info info;
-	struct i2c_client *client;
-	char *name;
-
-	if (!strcmp(loc, "BACKSIDE"))
-		name = "backside-temp";
-	else if (!strcmp(loc, "NB Ambient"))
-		name = "north-bridge-temp";
-	else if (!strcmp(loc, "GPU Ambient"))
-		name = "gpu-temp";
-	else
-		goto fail;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = addr >> 1;
-	info.platform_data = name;
-	strlcpy(info.type, "wf_max6690", I2C_NAME_SIZE);
-
-	client = i2c_new_device(adapter, &info);
-	if (client == NULL) {
-		printk(KERN_ERR "windfarm: failed to attach MAX6690 sensor\n");
-		goto fail;
-	}
-
-	/*
-	 * Let i2c-core delete that device on driver removal.
-	 * This is safe because i2c-core holds the core_lock mutex for us.
-	 */
-	list_add_tail(&client->detected, &wf_max6690_driver.clients);
-	return client;
-
- fail:
-	return NULL;
-}
-
-static int wf_max6690_attach(struct i2c_adapter *adapter)
-{
-	struct device_node *busnode, *dev = NULL;
-	struct pmac_i2c_bus *bus;
-	const char *loc;
-
-	bus = pmac_i2c_adapter_to_bus(adapter);
-	if (bus == NULL)
-		return -ENODEV;
-	busnode = pmac_i2c_get_bus_node(bus);
-
-	while ((dev = of_get_next_child(busnode, dev)) != NULL) {
-		u8 addr;
-
-		/* We must re-match the adapter in order to properly check
-		 * the channel on multibus setups
-		 */
-		if (!pmac_i2c_match_adapter(dev, adapter))
-			continue;
-		if (!of_device_is_compatible(dev, "max6690"))
-			continue;
-		addr = pmac_i2c_get_dev_addr(dev);
-		loc = of_get_property(dev, "hwsensor-location", NULL);
-		if (loc == NULL || addr == 0)
-			continue;
-		printk("found max6690, loc=%s addr=0x%02x\n", loc, addr);
-		wf_max6690_create(adapter, addr, loc);
-	}
-
-	return 0;
-}
-
 static int wf_max6690_remove(struct i2c_client *client)
 {
 	struct wf_6690_sensor *max = i2c_get_clientdata(client);
@@ -170,15 +116,15 @@ static int wf_max6690_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id wf_max6690_id[] = {
-	{ "wf_max6690", 0 },
+	{ "MAC,max6690", 0 },
 	{ }
 };
+MODULE_DEVICE_TABLE(i2c, wf_max6690_id);
 
 static struct i2c_driver wf_max6690_driver = {
 	.driver = {
 		.name		= "wf_max6690",
 	},
-	.attach_adapter	= wf_max6690_attach,
 	.probe		= wf_max6690_probe,
 	.remove		= wf_max6690_remove,
 	.id_table	= wf_max6690_id,
@@ -186,11 +132,6 @@ static struct i2c_driver wf_max6690_driver = {
 
 static int __init wf_max6690_sensor_init(void)
 {
-	/* Don't register on old machines that use therm_pm72 for now */
-	if (of_machine_is_compatible("PowerMac7,2") ||
-	    of_machine_is_compatible("PowerMac7,3") ||
-	    of_machine_is_compatible("RackMac3,1"))
-		return -ENODEV;
 	return i2c_add_driver(&wf_max6690_driver);
 }
 
diff --git a/drivers/macintosh/windfarm_mpu.h b/drivers/macintosh/windfarm_mpu.h
new file mode 100644
index 000000000000..046edc8c2ec5
--- /dev/null
+++ b/drivers/macintosh/windfarm_mpu.h
@@ -0,0 +1,105 @@
+/*
+ * Windfarm PowerMac thermal control
+ *
+ * Copyright 2012 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * Released under the term of the GNU GPL v2.
+ */
+
+#ifndef __WINDFARM_MPU_H
+#define __WINDFARM_MPU_H
+
+typedef unsigned short fu16;
+typedef int fs32;
+typedef short fs16;
+
+/* Definition of the MPU data structure which contains per CPU
+ * calibration information (among others) for the G5 machines
+ */
+struct mpu_data
+{
+	u8	signature;		/* 0x00 - EEPROM sig. */
+	u8	bytes_used;		/* 0x01 - Bytes used in eeprom (160 ?) */
+	u8	size;			/* 0x02 - EEPROM size (256 ?) */
+	u8	version;		/* 0x03 - EEPROM version */
+	u32	data_revision;		/* 0x04 - Dataset revision */
+	u8	processor_bin_code[3];	/* 0x08 - Processor BIN code */
+	u8	bin_code_expansion;	/* 0x0b - ??? (padding ?) */
+	u8	processor_num;		/* 0x0c - Number of CPUs on this MPU */
+	u8	input_mul_bus_div;	/* 0x0d - Clock input multiplier/bus divider */
+	u8	reserved1[2];		/* 0x0e - */
+	u32	input_clk_freq_high;	/* 0x10 - Input clock frequency high */
+	u8	cpu_nb_target_cycles;	/* 0x14 - ??? */
+	u8	cpu_statlat;		/* 0x15 - ??? */
+	u8	cpu_snooplat;		/* 0x16 - ??? */
+	u8	cpu_snoopacc;		/* 0x17 - ??? */
+	u8	nb_paamwin;		/* 0x18 - ??? */
+	u8	nb_statlat;		/* 0x19 - ??? */
+	u8	nb_snooplat;		/* 0x1a - ??? */
+	u8	nb_snoopwin;		/* 0x1b - ??? */
+	u8	api_bus_mode;		/* 0x1c - ??? */
+	u8	reserved2[3];		/* 0x1d - */
+	u32	input_clk_freq_low;	/* 0x20 - Input clock frequency low */
+	u8	processor_card_slot;	/* 0x24 - Processor card slot number */
+	u8	reserved3[2];		/* 0x25 - */
+	u8	padjmax;       		/* 0x27 - Max power adjustment (Not in OF!) */
+	u8	ttarget;		/* 0x28 - Target temperature */
+	u8	tmax;			/* 0x29 - Max temperature */
+	u8	pmaxh;			/* 0x2a - Max power */
+	u8	tguardband;		/* 0x2b - Guardband temp ??? Hist. len in OSX */
+	fs32	pid_gp;			/* 0x2c - PID proportional gain */
+	fs32	pid_gr;			/* 0x30 - PID reset gain */
+	fs32	pid_gd;			/* 0x34 - PID derivative gain */
+	fu16	voph;			/* 0x38 - Vop High */
+	fu16	vopl;			/* 0x3a - Vop Low */
+	fs16	nactual_die;		/* 0x3c - nActual Die */
+	fs16	nactual_heatsink;	/* 0x3e - nActual Heatsink */
+	fs16	nactual_system;		/* 0x40 - nActual System */
+	u16	calibration_flags;	/* 0x42 - Calibration flags */
+	fu16	mdiode;			/* 0x44 - Diode M value (scaling factor) */
+	fs16	bdiode;			/* 0x46 - Diode B value (offset) */
+	fs32	theta_heat_sink;	/* 0x48 - Theta heat sink */
+	u16	rminn_intake_fan;	/* 0x4c - Intake fan min RPM */
+	u16	rmaxn_intake_fan;	/* 0x4e - Intake fan max RPM */
+	u16	rminn_exhaust_fan;	/* 0x50 - Exhaust fan min RPM */
+	u16	rmaxn_exhaust_fan;	/* 0x52 - Exhaust fan max RPM */
+	u8	processor_part_num[8];	/* 0x54 - Processor part number XX pumps min/max */
+	u32	processor_lot_num;	/* 0x5c - Processor lot number */
+	u8	orig_card_sernum[0x10];	/* 0x60 - Card original serial number */
+	u8	curr_card_sernum[0x10];	/* 0x70 - Card current serial number */
+	u8	mlb_sernum[0x18];	/* 0x80 - MLB serial number */
+	u32	checksum1;		/* 0x98 - */
+	u32	checksum2;		/* 0x9c - */	
+}; /* Total size = 0xa0 */
+
+static inline const struct mpu_data *wf_get_mpu(int cpu)
+{
+	struct device_node *np;
+	char nodename[64];
+	const void *data;
+	int len;
+
+	/*
+	 * prom.c routine for finding a node by path is a bit brain dead
+	 * and requires exact @xxx unit numbers. This is a bit ugly but
+	 * will work for these machines
+	 */
+	sprintf(nodename, "/u3@0,f8000000/i2c@f8001000/cpuid@a%d", cpu ? 2 : 0);
+	np = of_find_node_by_path(nodename);
+	if (!np)
+		return NULL;
+	data = of_get_property(np, "cpuid", &len);	
+	of_node_put(np);
+	if (!data)
+		return NULL;
+
+	/*
+	 * We are naughty, we have dropped the reference to the device
+	 * node and still return a pointer to the content. We know we
+	 * can do that though as this is only ever called on PowerMac
+	 * which cannot remove those nodes
+	 */
+	return data;
+}
+
+#endif /*  __WINDFARM_MPU_H */
diff --git a/drivers/macintosh/windfarm_pm72.c b/drivers/macintosh/windfarm_pm72.c
new file mode 100644
index 000000000000..84ac913d7e3a
--- /dev/null
+++ b/drivers/macintosh/windfarm_pm72.c
@@ -0,0 +1,847 @@
+/*
+ * Windfarm PowerMac thermal control.
+ * Control loops for PowerMac7,2 and 7,3
+ *
+ * Copyright (C) 2012 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * Use and redistribute under the terms of the GNU GPL v2.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <asm/prom.h>
+#include <asm/smu.h>
+
+#include "windfarm.h"
+#include "windfarm_pid.h"
+#include "windfarm_mpu.h"
+
+#define VERSION "1.0"
+
+#undef DEBUG
+#undef LOTSA_DEBUG
+
+#ifdef DEBUG
+#define DBG(args...)	printk(args)
+#else
+#define DBG(args...)	do { } while(0)
+#endif
+
+#ifdef LOTSA_DEBUG
+#define DBG_LOTS(args...)	printk(args)
+#else
+#define DBG_LOTS(args...)	do { } while(0)
+#endif
+
+/* define this to force CPU overtemp to 60 degree, useful for testing
+ * the overtemp code
+ */
+#undef HACKED_OVERTEMP
+
+/* We currently only handle 2 chips */
+#define NR_CHIPS	2
+#define NR_CPU_FANS	3 * NR_CHIPS
+
+/* Controls and sensors */
+static struct wf_sensor *sens_cpu_temp[NR_CHIPS];
+static struct wf_sensor *sens_cpu_volts[NR_CHIPS];
+static struct wf_sensor *sens_cpu_amps[NR_CHIPS];
+static struct wf_sensor *backside_temp;
+static struct wf_sensor *drives_temp;
+
+static struct wf_control *cpu_front_fans[NR_CHIPS];
+static struct wf_control *cpu_rear_fans[NR_CHIPS];
+static struct wf_control *cpu_pumps[NR_CHIPS];
+static struct wf_control *backside_fan;
+static struct wf_control *drives_fan;
+static struct wf_control *slots_fan;
+static struct wf_control *cpufreq_clamp;
+
+/* We keep a temperature history for average calculation of 180s */
+#define CPU_TEMP_HIST_SIZE	180
+
+/* Fixed speed for slot fan */
+#define	SLOTS_FAN_DEFAULT_PWM	40
+
+/* Scale value for CPU intake fans */
+#define CPU_INTAKE_SCALE	0x0000f852
+
+/* PID loop state */
+static const struct mpu_data *cpu_mpu_data[NR_CHIPS];
+static struct wf_cpu_pid_state cpu_pid[NR_CHIPS];
+static bool cpu_pid_combined;
+static u32 cpu_thist[CPU_TEMP_HIST_SIZE];
+static int cpu_thist_pt;
+static s64 cpu_thist_total;
+static s32 cpu_all_tmax = 100 << 16;
+static struct wf_pid_state backside_pid;
+static int backside_tick;
+static struct wf_pid_state drives_pid;
+static int drives_tick;
+
+static int nr_chips;
+static bool have_all_controls;
+static bool have_all_sensors;
+static bool started;
+
+static int failure_state;
+#define FAILURE_SENSOR		1
+#define FAILURE_FAN		2
+#define FAILURE_PERM		4
+#define FAILURE_LOW_OVERTEMP	8
+#define FAILURE_HIGH_OVERTEMP	16
+
+/* Overtemp values */
+#define LOW_OVER_AVERAGE	0
+#define LOW_OVER_IMMEDIATE	(10 << 16)
+#define LOW_OVER_CLEAR		((-10) << 16)
+#define HIGH_OVER_IMMEDIATE	(14 << 16)
+#define HIGH_OVER_AVERAGE	(10 << 16)
+#define HIGH_OVER_IMMEDIATE	(14 << 16)
+
+
+static void cpu_max_all_fans(void)
+{
+	int i;
+
+	/* We max all CPU fans in case of a sensor error. We also do the
+	 * cpufreq clamping now, even if it's supposedly done later by the
+	 * generic code anyway, we do it earlier here to react faster
+	 */
+	if (cpufreq_clamp)
+		wf_control_set_max(cpufreq_clamp);
+	for (i = 0; i < nr_chips; i++) {
+		if (cpu_front_fans[i])
+			wf_control_set_max(cpu_front_fans[i]);
+		if (cpu_rear_fans[i])
+			wf_control_set_max(cpu_rear_fans[i]);
+		if (cpu_pumps[i])
+			wf_control_set_max(cpu_pumps[i]);
+	}
+}
+
+static int cpu_check_overtemp(s32 temp)
+{
+	int new_state = 0;
+	s32 t_avg, t_old;
+	static bool first = true;
+
+	/* First check for immediate overtemps */
+	if (temp >= (cpu_all_tmax + LOW_OVER_IMMEDIATE)) {
+		new_state |= FAILURE_LOW_OVERTEMP;
+		if ((failure_state & FAILURE_LOW_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Overtemp due to immediate CPU"
+			       " temperature !\n");
+	}
+	if (temp >= (cpu_all_tmax + HIGH_OVER_IMMEDIATE)) {
+		new_state |= FAILURE_HIGH_OVERTEMP;
+		if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Critical overtemp due to"
+			       " immediate CPU temperature !\n");
+	}
+
+	/*
+	 * The first time around, initialize the array with the first
+	 * temperature reading
+	 */
+	if (first) {
+		int i;
+
+		cpu_thist_total = 0;
+		for (i = 0; i < CPU_TEMP_HIST_SIZE; i++) {
+			cpu_thist[i] = temp;
+			cpu_thist_total += temp;
+		}
+		first = false;
+	}
+
+	/*
+	 * We calculate a history of max temperatures and use that for the
+	 * overtemp management
+	 */
+	t_old = cpu_thist[cpu_thist_pt];
+	cpu_thist[cpu_thist_pt] = temp;
+	cpu_thist_pt = (cpu_thist_pt + 1) % CPU_TEMP_HIST_SIZE;
+	cpu_thist_total -= t_old;
+	cpu_thist_total += temp;
+	t_avg = cpu_thist_total / CPU_TEMP_HIST_SIZE;
+
+	DBG_LOTS("  t_avg = %d.%03d (out: %d.%03d, in: %d.%03d)\n",
+		 FIX32TOPRINT(t_avg), FIX32TOPRINT(t_old), FIX32TOPRINT(temp));
+
+	/* Now check for average overtemps */
+	if (t_avg >= (cpu_all_tmax + LOW_OVER_AVERAGE)) {
+		new_state |= FAILURE_LOW_OVERTEMP;
+		if ((failure_state & FAILURE_LOW_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Overtemp due to average CPU"
+			       " temperature !\n");
+	}
+	if (t_avg >= (cpu_all_tmax + HIGH_OVER_AVERAGE)) {
+		new_state |= FAILURE_HIGH_OVERTEMP;
+		if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Critical overtemp due to"
+			       " average CPU temperature !\n");
+	}
+
+	/* Now handle overtemp conditions. We don't currently use the windfarm
+	 * overtemp handling core as it's not fully suited to the needs of those
+	 * new machine. This will be fixed later.
+	 */
+	if (new_state) {
+		/* High overtemp -> immediate shutdown */
+		if (new_state & FAILURE_HIGH_OVERTEMP)
+			machine_power_off();
+		if ((failure_state & new_state) != new_state)
+			cpu_max_all_fans();
+		failure_state |= new_state;
+	} else if ((failure_state & FAILURE_LOW_OVERTEMP) &&
+		   (temp < (cpu_all_tmax + LOW_OVER_CLEAR))) {
+		printk(KERN_ERR "windfarm: Overtemp condition cleared !\n");
+		failure_state &= ~FAILURE_LOW_OVERTEMP;
+	}
+
+	return failure_state & (FAILURE_LOW_OVERTEMP | FAILURE_HIGH_OVERTEMP);
+}
+
+static int read_one_cpu_vals(int cpu, s32 *temp, s32 *power)
+{
+	s32 dtemp, volts, amps;
+	int rc;
+
+	/* Get diode temperature */
+	rc = wf_sensor_get(sens_cpu_temp[cpu], &dtemp);
+	if (rc) {
+		DBG("  CPU%d: temp reading error !\n", cpu);
+		return -EIO;
+	}
+	DBG_LOTS("  CPU%d: temp   = %d.%03d\n", cpu, FIX32TOPRINT((dtemp)));
+	*temp = dtemp;
+
+	/* Get voltage */
+	rc = wf_sensor_get(sens_cpu_volts[cpu], &volts);
+	if (rc) {
+		DBG("  CPU%d, volts reading error !\n", cpu);
+		return -EIO;
+	}
+	DBG_LOTS("  CPU%d: volts  = %d.%03d\n", cpu, FIX32TOPRINT((volts)));
+
+	/* Get current */
+	rc = wf_sensor_get(sens_cpu_amps[cpu], &amps);
+	if (rc) {
+		DBG("  CPU%d, current reading error !\n", cpu);
+		return -EIO;
+	}
+	DBG_LOTS("  CPU%d: amps   = %d.%03d\n", cpu, FIX32TOPRINT((amps)));
+
+	/* Calculate power */
+
+	/* Scale voltage and current raw sensor values according to fixed scales
+	 * obtained in Darwin and calculate power from I and V
+	 */
+	*power = (((u64)volts) * ((u64)amps)) >> 16;
+
+	DBG_LOTS("  CPU%d: power  = %d.%03d\n", cpu, FIX32TOPRINT((*power)));
+
+	return 0;
+
+}
+
+static void cpu_fans_tick_split(void)
+{
+	int err, cpu;
+	s32 intake, temp, power, t_max = 0;
+
+	DBG_LOTS("* cpu fans_tick_split()\n");
+
+	for (cpu = 0; cpu < nr_chips; ++cpu) {
+		struct wf_cpu_pid_state *sp = &cpu_pid[cpu];
+
+		/* Read current speed */
+		wf_control_get(cpu_rear_fans[cpu], &sp->target);
+
+		DBG_LOTS("  CPU%d: cur_target = %d RPM\n", cpu, sp->target);
+
+		err = read_one_cpu_vals(cpu, &temp, &power);
+		if (err) {
+			failure_state |= FAILURE_SENSOR;
+			cpu_max_all_fans();
+			return;
+		}
+
+		/* Keep track of highest temp */
+		t_max = max(t_max, temp);
+
+		/* Handle possible overtemps */
+		if (cpu_check_overtemp(t_max))
+			return;
+
+		/* Run PID */
+		wf_cpu_pid_run(sp, power, temp);
+
+		DBG_LOTS("  CPU%d: target = %d RPM\n", cpu, sp->target);
+
+		/* Apply result directly to exhaust fan */
+		err = wf_control_set(cpu_rear_fans[cpu], sp->target);
+		if (err) {
+			pr_warning("wf_pm72: Fan %s reports error %d\n",
+			       cpu_rear_fans[cpu]->name, err);
+			failure_state |= FAILURE_FAN;
+			break;
+		}
+
+		/* Scale result for intake fan */
+		intake = (sp->target * CPU_INTAKE_SCALE) >> 16;
+		DBG_LOTS("  CPU%d: intake = %d RPM\n", cpu, intake);
+		err = wf_control_set(cpu_front_fans[cpu], intake);
+		if (err) {
+			pr_warning("wf_pm72: Fan %s reports error %d\n",
+			       cpu_front_fans[cpu]->name, err);
+			failure_state |= FAILURE_FAN;
+			break;
+		}
+	}
+}
+
+static void cpu_fans_tick_combined(void)
+{
+	s32 temp0, power0, temp1, power1, t_max = 0;
+	s32 temp, power, intake, pump;
+	struct wf_control *pump0, *pump1;
+	struct wf_cpu_pid_state *sp = &cpu_pid[0];
+	int err, cpu;
+
+	DBG_LOTS("* cpu fans_tick_combined()\n");
+
+	/* Read current speed from cpu 0 */
+	wf_control_get(cpu_rear_fans[0], &sp->target);
+
+	DBG_LOTS("  CPUs: cur_target = %d RPM\n", sp->target);
+
+	/* Read values for both CPUs */
+	err = read_one_cpu_vals(0, &temp0, &power0);
+	if (err) {
+		failure_state |= FAILURE_SENSOR;
+		cpu_max_all_fans();
+		return;
+	}
+	err = read_one_cpu_vals(1, &temp1, &power1);
+	if (err) {
+		failure_state |= FAILURE_SENSOR;
+		cpu_max_all_fans();
+		return;
+	}
+
+	/* Keep track of highest temp */
+	t_max = max(t_max, max(temp0, temp1));
+
+	/* Handle possible overtemps */
+	if (cpu_check_overtemp(t_max))
+		return;
+
+	/* Use the max temp & power of both */
+	temp = max(temp0, temp1);
+	power = max(power0, power1);
+
+	/* Run PID */
+	wf_cpu_pid_run(sp, power, temp);
+
+	/* Scale result for intake fan */
+	intake = (sp->target * CPU_INTAKE_SCALE) >> 16;
+
+	/* Same deal with pump speed */
+	pump0 = cpu_pumps[0];
+	pump1 = cpu_pumps[1];
+	if (!pump0) {
+		pump0 = pump1;
+		pump1 = NULL;
+	}
+	pump = (sp->target * wf_control_get_max(pump0)) /
+		cpu_mpu_data[0]->rmaxn_exhaust_fan;
+
+	DBG_LOTS("  CPUs: target = %d RPM\n", sp->target);
+	DBG_LOTS("  CPUs: intake = %d RPM\n", intake);
+	DBG_LOTS("  CPUs: pump   = %d RPM\n", pump);
+
+	for (cpu = 0; cpu < nr_chips; cpu++) {
+		err = wf_control_set(cpu_rear_fans[cpu], sp->target);
+		if (err) {
+			pr_warning("wf_pm72: Fan %s reports error %d\n",
+				   cpu_rear_fans[cpu]->name, err);
+			failure_state |= FAILURE_FAN;
+		}
+		err = wf_control_set(cpu_front_fans[cpu], intake);
+		if (err) {
+			pr_warning("wf_pm72: Fan %s reports error %d\n",
+				   cpu_front_fans[cpu]->name, err);
+			failure_state |= FAILURE_FAN;
+		}
+		err = 0;
+		if (cpu_pumps[cpu])
+			err = wf_control_set(cpu_pumps[cpu], pump);
+		if (err) {
+			pr_warning("wf_pm72: Pump %s reports error %d\n",
+				   cpu_pumps[cpu]->name, err);
+			failure_state |= FAILURE_FAN;
+		}
+	}
+}
+
+/* Implementation... */
+static int cpu_setup_pid(int cpu)
+{
+	struct wf_cpu_pid_param pid;
+	const struct mpu_data *mpu = cpu_mpu_data[cpu];
+	s32 tmax, ttarget, ptarget;
+	int fmin, fmax, hsize;
+
+	/* Get PID params from the appropriate MPU EEPROM */
+	tmax = mpu->tmax << 16;
+	ttarget = mpu->ttarget << 16;
+	ptarget = ((s32)(mpu->pmaxh - mpu->padjmax)) << 16;
+
+	DBG("wf_72: CPU%d ttarget = %d.%03d, tmax = %d.%03d\n",
+	    cpu, FIX32TOPRINT(ttarget), FIX32TOPRINT(tmax));
+
+	/* We keep a global tmax for overtemp calculations */
+	if (tmax < cpu_all_tmax)
+		cpu_all_tmax = tmax;
+
+	/* Set PID min/max by using the rear fan min/max */
+	fmin = wf_control_get_min(cpu_rear_fans[cpu]);
+	fmax = wf_control_get_max(cpu_rear_fans[cpu]);
+	DBG("wf_72: CPU%d max RPM range = [%d..%d]\n", cpu, fmin, fmax);
+
+	/* History size */
+	hsize = min_t(int, mpu->tguardband, WF_PID_MAX_HISTORY);
+	DBG("wf_72: CPU%d history size = %d\n", cpu, hsize);
+
+	/* Initialize PID loop */
+	pid.interval	= 1;	/* seconds */
+	pid.history_len = hsize;
+	pid.gd		= mpu->pid_gd;
+	pid.gp		= mpu->pid_gp;
+	pid.gr		= mpu->pid_gr;
+	pid.tmax	= tmax;
+	pid.ttarget	= ttarget;
+	pid.pmaxadj	= ptarget;
+	pid.min		= fmin;
+	pid.max		= fmax;
+
+	wf_cpu_pid_init(&cpu_pid[cpu], &pid);
+	cpu_pid[cpu].target = 1000;
+
+	return 0;
+}
+
+/* Backside/U3 fan */
+static struct wf_pid_param backside_u3_param = {
+	.interval	= 5,
+	.history_len	= 2,
+	.gd		= 40 << 20,
+	.gp		= 5 << 20,
+	.gr		= 0,
+	.itarget	= 65 << 16,
+	.additive	= 1,
+	.min		= 20,
+	.max		= 100,
+};
+
+static struct wf_pid_param backside_u3h_param = {
+	.interval	= 5,
+	.history_len	= 2,
+	.gd		= 20 << 20,
+	.gp		= 5 << 20,
+	.gr		= 0,
+	.itarget	= 75 << 16,
+	.additive	= 1,
+	.min		= 20,
+	.max		= 100,
+};
+
+static void backside_fan_tick(void)
+{
+	s32 temp;
+	int speed;
+	int err;
+
+	if (!backside_fan || !backside_temp || !backside_tick)
+		return;
+	if (--backside_tick > 0)
+		return;
+	backside_tick = backside_pid.param.interval;
+
+	DBG_LOTS("* backside fans tick\n");
+
+	/* Update fan speed from actual fans */
+	err = wf_control_get(backside_fan, &speed);
+	if (!err)
+		backside_pid.target = speed;
+
+	err = wf_sensor_get(backside_temp, &temp);
+	if (err) {
+		printk(KERN_WARNING "windfarm: U4 temp sensor error %d\n",
+		       err);
+		failure_state |= FAILURE_SENSOR;
+		wf_control_set_max(backside_fan);
+		return;
+	}
+	speed = wf_pid_run(&backside_pid, temp);
+
+	DBG_LOTS("backside PID temp=%d.%.3d speed=%d\n",
+		 FIX32TOPRINT(temp), speed);
+
+	err = wf_control_set(backside_fan, speed);
+	if (err) {
+		printk(KERN_WARNING "windfarm: backside fan error %d\n", err);
+		failure_state |= FAILURE_FAN;
+	}
+}
+
+static void backside_setup_pid(void)
+{
+	/* first time initialize things */
+	s32 fmin = wf_control_get_min(backside_fan);
+	s32 fmax = wf_control_get_max(backside_fan);
+	struct wf_pid_param param;
+	struct device_node *u3;
+	int u3h = 1; /* conservative by default */
+
+	u3 = of_find_node_by_path("/u3@0,f8000000");
+	if (u3 != NULL) {
+		const u32 *vers = of_get_property(u3, "device-rev", NULL);
+		if (vers)
+			if (((*vers) & 0x3f) < 0x34)
+				u3h = 0;
+		of_node_put(u3);
+	}
+
+	param = u3h ? backside_u3h_param : backside_u3_param;
+
+	param.min = max(param.min, fmin);
+	param.max = min(param.max, fmax);
+	wf_pid_init(&backside_pid, &param);
+	backside_tick = 1;
+
+	pr_info("wf_pm72: Backside control loop started.\n");
+}
+
+/* Drive bay fan */
+static const struct wf_pid_param drives_param = {
+	.interval	= 5,
+	.history_len	= 2,
+	.gd		= 30 << 20,
+	.gp		= 5 << 20,
+	.gr		= 0,
+	.itarget	= 40 << 16,
+	.additive	= 1,
+	.min		= 300,
+	.max		= 4000,
+};
+
+static void drives_fan_tick(void)
+{
+	s32 temp;
+	int speed;
+	int err;
+
+	if (!drives_fan || !drives_temp || !drives_tick)
+		return;
+	if (--drives_tick > 0)
+		return;
+	drives_tick = drives_pid.param.interval;
+
+	DBG_LOTS("* drives fans tick\n");
+
+	/* Update fan speed from actual fans */
+	err = wf_control_get(drives_fan, &speed);
+	if (!err)
+		drives_pid.target = speed;
+
+	err = wf_sensor_get(drives_temp, &temp);
+	if (err) {
+		pr_warning("wf_pm72: drive bay temp sensor error %d\n", err);
+		failure_state |= FAILURE_SENSOR;
+		wf_control_set_max(drives_fan);
+		return;
+	}
+	speed = wf_pid_run(&drives_pid, temp);
+
+	DBG_LOTS("drives PID temp=%d.%.3d speed=%d\n",
+		 FIX32TOPRINT(temp), speed);
+
+	err = wf_control_set(drives_fan, speed);
+	if (err) {
+		printk(KERN_WARNING "windfarm: drive bay fan error %d\n", err);
+		failure_state |= FAILURE_FAN;
+	}
+}
+
+static void drives_setup_pid(void)
+{
+	/* first time initialize things */
+	s32 fmin = wf_control_get_min(drives_fan);
+	s32 fmax = wf_control_get_max(drives_fan);
+	struct wf_pid_param param = drives_param;
+
+	param.min = max(param.min, fmin);
+	param.max = min(param.max, fmax);
+	wf_pid_init(&drives_pid, &param);
+	drives_tick = 1;
+
+	pr_info("wf_pm72: Drive bay control loop started.\n");
+}
+
+static void set_fail_state(void)
+{
+	cpu_max_all_fans();
+
+	if (backside_fan)
+		wf_control_set_max(backside_fan);
+	if (slots_fan)
+		wf_control_set_max(slots_fan);
+	if (drives_fan)
+		wf_control_set_max(drives_fan);
+}
+
+static void pm72_tick(void)
+{
+	int i, last_failure;
+
+	if (!started) {
+		started = 1;
+		printk(KERN_INFO "windfarm: CPUs control loops started.\n");
+		for (i = 0; i < nr_chips; ++i) {
+			if (cpu_setup_pid(i) < 0) {
+				failure_state = FAILURE_PERM;
+				set_fail_state();
+				break;
+			}
+		}
+		DBG_LOTS("cpu_all_tmax=%d.%03d\n", FIX32TOPRINT(cpu_all_tmax));
+
+		backside_setup_pid();
+		drives_setup_pid();
+
+		/*
+		 * We don't have the right stuff to drive the PCI fan
+		 * so we fix it to a default value
+		 */
+		wf_control_set(slots_fan, SLOTS_FAN_DEFAULT_PWM);
+
+#ifdef HACKED_OVERTEMP
+		cpu_all_tmax = 60 << 16;
+#endif
+	}
+
+	/* Permanent failure, bail out */
+	if (failure_state & FAILURE_PERM)
+		return;
+
+	/*
+	 * Clear all failure bits except low overtemp which will be eventually
+	 * cleared by the control loop itself
+	 */
+	last_failure = failure_state;
+	failure_state &= FAILURE_LOW_OVERTEMP;
+	if (cpu_pid_combined)
+		cpu_fans_tick_combined();
+	else
+		cpu_fans_tick_split();
+	backside_fan_tick();
+	drives_fan_tick();
+
+	DBG_LOTS("  last_failure: 0x%x, failure_state: %x\n",
+		 last_failure, failure_state);
+
+	/* Check for failures. Any failure causes cpufreq clamping */
+	if (failure_state && last_failure == 0 && cpufreq_clamp)
+		wf_control_set_max(cpufreq_clamp);
+	if (failure_state == 0 && last_failure && cpufreq_clamp)
+		wf_control_set_min(cpufreq_clamp);
+
+	/* That's it for now, we might want to deal with other failures
+	 * differently in the future though
+	 */
+}
+
+static void pm72_new_control(struct wf_control *ct)
+{
+	bool all_controls;
+	bool had_pump = cpu_pumps[0] || cpu_pumps[1];
+
+	if (!strcmp(ct->name, "cpu-front-fan-0"))
+		cpu_front_fans[0] = ct;
+	else if (!strcmp(ct->name, "cpu-front-fan-1"))
+		cpu_front_fans[1] = ct;
+	else if (!strcmp(ct->name, "cpu-rear-fan-0"))
+		cpu_rear_fans[0] = ct;
+	else if (!strcmp(ct->name, "cpu-rear-fan-1"))
+		cpu_rear_fans[1] = ct;
+	else if (!strcmp(ct->name, "cpu-pump-0"))
+		cpu_pumps[0] = ct;
+	else if (!strcmp(ct->name, "cpu-pump-1"))
+		cpu_pumps[1] = ct;
+	else if (!strcmp(ct->name, "backside-fan"))
+		backside_fan = ct;
+	else if (!strcmp(ct->name, "slots-fan"))
+		slots_fan = ct;
+	else if (!strcmp(ct->name, "drive-bay-fan"))
+		drives_fan = ct;
+	else if (!strcmp(ct->name, "cpufreq-clamp"))
+		cpufreq_clamp = ct;
+
+	all_controls =
+		cpu_front_fans[0] &&
+		cpu_rear_fans[0] &&
+		backside_fan &&
+		slots_fan &&
+		drives_fan;
+	if (nr_chips > 1)
+		all_controls &=
+			cpu_front_fans[1] &&
+			cpu_rear_fans[1];
+	have_all_controls = all_controls;
+
+	if ((cpu_pumps[0] || cpu_pumps[1]) && !had_pump) {
+		pr_info("wf_pm72: Liquid cooling pump(s) detected,"
+			" using new algorithm !\n");
+		cpu_pid_combined = true;
+	}
+}
+
+
+static void pm72_new_sensor(struct wf_sensor *sr)
+{
+	bool all_sensors;
+
+	if (!strcmp(sr->name, "cpu-diode-temp-0"))
+		sens_cpu_temp[0] = sr;
+	else if (!strcmp(sr->name, "cpu-diode-temp-1"))
+		sens_cpu_temp[1] = sr;
+	else if (!strcmp(sr->name, "cpu-voltage-0"))
+		sens_cpu_volts[0] = sr;
+	else if (!strcmp(sr->name, "cpu-voltage-1"))
+		sens_cpu_volts[1] = sr;
+	else if (!strcmp(sr->name, "cpu-current-0"))
+		sens_cpu_amps[0] = sr;
+	else if (!strcmp(sr->name, "cpu-current-1"))
+		sens_cpu_amps[1] = sr;
+	else if (!strcmp(sr->name, "backside-temp"))
+		backside_temp = sr;
+	else if (!strcmp(sr->name, "hd-temp"))
+		drives_temp = sr;
+
+	all_sensors =
+		sens_cpu_temp[0] &&
+		sens_cpu_volts[0] &&
+		sens_cpu_amps[0] &&
+		backside_temp &&
+		drives_temp;
+	if (nr_chips > 1)
+		all_sensors &=
+			sens_cpu_temp[1] &&
+			sens_cpu_volts[1] &&
+			sens_cpu_amps[1];
+
+	have_all_sensors = all_sensors;
+}
+
+static int pm72_wf_notify(struct notifier_block *self,
+			  unsigned long event, void *data)
+{
+	switch (event) {
+	case WF_EVENT_NEW_SENSOR:
+		pm72_new_sensor(data);
+		break;
+	case WF_EVENT_NEW_CONTROL:
+		pm72_new_control(data);
+		break;
+	case WF_EVENT_TICK:
+		if (have_all_controls && have_all_sensors)
+			pm72_tick();
+	}
+	return 0;
+}
+
+static struct notifier_block pm72_events = {
+	.notifier_call = pm72_wf_notify,
+};
+
+static int wf_pm72_probe(struct platform_device *dev)
+{
+	wf_register_client(&pm72_events);
+	return 0;
+}
+
+static int __devexit wf_pm72_remove(struct platform_device *dev)
+{
+	wf_unregister_client(&pm72_events);
+
+	/* should release all sensors and controls */
+	return 0;
+}
+
+static struct platform_driver wf_pm72_driver = {
+	.probe	= wf_pm72_probe,
+	.remove	= wf_pm72_remove,
+	.driver	= {
+		.name = "windfarm",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init wf_pm72_init(void)
+{
+	struct device_node *cpu;
+	int i;
+
+	if (!of_machine_is_compatible("PowerMac7,2") &&
+	    !of_machine_is_compatible("PowerMac7,3"))
+		return -ENODEV;
+
+	/* Count the number of CPU cores */
+	nr_chips = 0;
+	for (cpu = NULL; (cpu = of_find_node_by_type(cpu, "cpu")) != NULL; )
+		++nr_chips;
+	if (nr_chips > NR_CHIPS)
+		nr_chips = NR_CHIPS;
+
+	pr_info("windfarm: Initializing for desktop G5 with %d chips\n",
+		nr_chips);
+
+	/* Get MPU data for each CPU */
+	for (i = 0; i < nr_chips; i++) {
+		cpu_mpu_data[i] = wf_get_mpu(i);
+		if (!cpu_mpu_data[i]) {
+			pr_err("wf_pm72: Failed to find MPU data for CPU %d\n", i);
+			return -ENXIO;
+		}
+	}
+
+#ifdef MODULE
+	request_module("windfarm_fcu_controls");
+	request_module("windfarm_lm75_sensor");
+	request_module("windfarm_ad7417_sensor");
+	request_module("windfarm_max6690_sensor");
+	request_module("windfarm_cpufreq_clamp");
+#endif /* MODULE */
+
+	platform_driver_register(&wf_pm72_driver);
+	return 0;
+}
+
+static void __exit wf_pm72_exit(void)
+{
+	platform_driver_unregister(&wf_pm72_driver);
+}
+
+module_init(wf_pm72_init);
+module_exit(wf_pm72_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Thermal control for AGP PowerMac G5s");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:windfarm");
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index fc13d0f2663b..990c87606be9 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -302,13 +302,13 @@ static void wf_smu_create_sys_fans(void)
 	pid_param.interval = WF_SMU_SYS_FANS_INTERVAL;
 	pid_param.history_len = WF_SMU_SYS_FANS_HISTORY_SIZE;
 	pid_param.itarget = param->itarget;
-	pid_param.min = fan_system->ops->get_min(fan_system);
-	pid_param.max = fan_system->ops->get_max(fan_system);
+	pid_param.min = wf_control_get_min(fan_system);
+	pid_param.max = wf_control_get_max(fan_system);
 	if (fan_hd) {
 		pid_param.min =
-			max(pid_param.min,fan_hd->ops->get_min(fan_hd));
+			max(pid_param.min, wf_control_get_min(fan_hd));
 		pid_param.max =
-			min(pid_param.max,fan_hd->ops->get_max(fan_hd));
+			min(pid_param.max, wf_control_get_max(fan_hd));
 	}
 	wf_pid_init(&wf_smu_sys_fans->pid, &pid_param);
 
@@ -337,7 +337,7 @@ static void wf_smu_sys_fans_tick(struct wf_smu_sys_fans_state *st)
 	}
 	st->ticks = WF_SMU_SYS_FANS_INTERVAL;
 
-	rc = sensor_hd_temp->ops->get_value(sensor_hd_temp, &temp);
+	rc = wf_sensor_get(sensor_hd_temp, &temp);
 	if (rc) {
 		printk(KERN_WARNING "windfarm: HD temp sensor error %d\n",
 		       rc);
@@ -373,7 +373,7 @@ static void wf_smu_sys_fans_tick(struct wf_smu_sys_fans_state *st)
 	st->hd_setpoint = new_setpoint;
  readjust:
 	if (fan_system && wf_smu_failure_state == 0) {
-		rc = fan_system->ops->set_value(fan_system, st->sys_setpoint);
+		rc = wf_control_set(fan_system, st->sys_setpoint);
 		if (rc) {
 			printk(KERN_WARNING "windfarm: Sys fan error %d\n",
 			       rc);
@@ -381,7 +381,7 @@ static void wf_smu_sys_fans_tick(struct wf_smu_sys_fans_state *st)
 		}
 	}
 	if (fan_hd && wf_smu_failure_state == 0) {
-		rc = fan_hd->ops->set_value(fan_hd, st->hd_setpoint);
+		rc = wf_control_set(fan_hd, st->hd_setpoint);
 		if (rc) {
 			printk(KERN_WARNING "windfarm: HD fan error %d\n",
 			       rc);
@@ -447,8 +447,8 @@ static void wf_smu_create_cpu_fans(void)
 	pid_param.ttarget = tmax - tdelta;
 	pid_param.pmaxadj = maxpow - powadj;
 
-	pid_param.min = fan_cpu_main->ops->get_min(fan_cpu_main);
-	pid_param.max = fan_cpu_main->ops->get_max(fan_cpu_main);
+	pid_param.min = wf_control_get_min(fan_cpu_main);
+	pid_param.max = wf_control_get_max(fan_cpu_main);
 
 	wf_cpu_pid_init(&wf_smu_cpu_fans->pid, &pid_param);
 
@@ -481,7 +481,7 @@ static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
 	}
 	st->ticks = WF_SMU_CPU_FANS_INTERVAL;
 
-	rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp);
+	rc = wf_sensor_get(sensor_cpu_temp, &temp);
 	if (rc) {
 		printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n",
 		       rc);
@@ -489,7 +489,7 @@ static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
 		return;
 	}
 
-	rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power);
+	rc = wf_sensor_get(sensor_cpu_power, &power);
 	if (rc) {
 		printk(KERN_WARNING "windfarm: CPU power sensor error %d\n",
 		       rc);
@@ -525,8 +525,7 @@ static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
 	st->cpu_setpoint = new_setpoint;
  readjust:
 	if (fan_cpu_main && wf_smu_failure_state == 0) {
-		rc = fan_cpu_main->ops->set_value(fan_cpu_main,
-						  st->cpu_setpoint);
+		rc = wf_control_set(fan_cpu_main, st->cpu_setpoint);
 		if (rc) {
 			printk(KERN_WARNING "windfarm: CPU main fan"
 			       " error %d\n", rc);
diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c
index a9430ed4f36c..7653603cb00e 100644
--- a/drivers/macintosh/windfarm_pm91.c
+++ b/drivers/macintosh/windfarm_pm91.c
@@ -192,8 +192,8 @@ static void wf_smu_create_cpu_fans(void)
 	pid_param.ttarget = tmax - tdelta;
 	pid_param.pmaxadj = maxpow - powadj;
 
-	pid_param.min = fan_cpu_main->ops->get_min(fan_cpu_main);
-	pid_param.max = fan_cpu_main->ops->get_max(fan_cpu_main);
+	pid_param.min = wf_control_get_min(fan_cpu_main);
+	pid_param.max = wf_control_get_max(fan_cpu_main);
 
 	wf_cpu_pid_init(&wf_smu_cpu_fans->pid, &pid_param);
 
@@ -226,7 +226,7 @@ static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
 	}
 	st->ticks = WF_SMU_CPU_FANS_INTERVAL;
 
-	rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp);
+	rc = wf_sensor_get(sensor_cpu_temp, &temp);
 	if (rc) {
 		printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n",
 		       rc);
@@ -234,7 +234,7 @@ static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
 		return;
 	}
 
-	rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power);
+	rc = wf_sensor_get(sensor_cpu_power, &power);
 	if (rc) {
 		printk(KERN_WARNING "windfarm: CPU power sensor error %d\n",
 		       rc);
@@ -261,8 +261,7 @@ static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
 	st->cpu_setpoint = new_setpoint;
  readjust:
 	if (fan_cpu_main && wf_smu_failure_state == 0) {
-		rc = fan_cpu_main->ops->set_value(fan_cpu_main,
-						  st->cpu_setpoint);
+		rc = wf_control_set(fan_cpu_main, st->cpu_setpoint);
 		if (rc) {
 			printk(KERN_WARNING "windfarm: CPU main fan"
 			       " error %d\n", rc);
@@ -270,8 +269,7 @@ static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
 		}
 	}
 	if (fan_cpu_second && wf_smu_failure_state == 0) {
-		rc = fan_cpu_second->ops->set_value(fan_cpu_second,
-						    st->cpu_setpoint);
+		rc = wf_control_set(fan_cpu_second, st->cpu_setpoint);
 		if (rc) {
 			printk(KERN_WARNING "windfarm: CPU second fan"
 			       " error %d\n", rc);
@@ -279,8 +277,7 @@ static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
 		}
 	}
 	if (fan_cpu_third && wf_smu_failure_state == 0) {
-		rc = fan_cpu_main->ops->set_value(fan_cpu_third,
-						  st->cpu_setpoint);
+		rc = wf_control_set(fan_cpu_third, st->cpu_setpoint);
 		if (rc) {
 			printk(KERN_WARNING "windfarm: CPU third fan"
 			       " error %d\n", rc);
@@ -312,8 +309,8 @@ static void wf_smu_create_drive_fans(void)
 
 	/* Fill PID params */
 	param.additive = (fan_hd->type == WF_CONTROL_RPM_FAN);
-	param.min = fan_hd->ops->get_min(fan_hd);
-	param.max = fan_hd->ops->get_max(fan_hd);
+	param.min = wf_control_get_min(fan_hd);
+	param.max = wf_control_get_max(fan_hd);
 	wf_pid_init(&wf_smu_drive_fans->pid, &param);
 
 	DBG("wf: Drive Fan control initialized.\n");
@@ -338,7 +335,7 @@ static void wf_smu_drive_fans_tick(struct wf_smu_drive_fans_state *st)
 	}
 	st->ticks = st->pid.param.interval;
 
-	rc = sensor_hd_temp->ops->get_value(sensor_hd_temp, &temp);
+	rc = wf_sensor_get(sensor_hd_temp, &temp);
 	if (rc) {
 		printk(KERN_WARNING "windfarm: HD temp sensor error %d\n",
 		       rc);
@@ -361,7 +358,7 @@ static void wf_smu_drive_fans_tick(struct wf_smu_drive_fans_state *st)
 	st->setpoint = new_setpoint;
  readjust:
 	if (fan_hd && wf_smu_failure_state == 0) {
-		rc = fan_hd->ops->set_value(fan_hd, st->setpoint);
+		rc = wf_control_set(fan_hd, st->setpoint);
 		if (rc) {
 			printk(KERN_WARNING "windfarm: HD fan error %d\n",
 			       rc);
@@ -393,8 +390,8 @@ static void wf_smu_create_slots_fans(void)
 
 	/* Fill PID params */
 	param.additive = (fan_slots->type == WF_CONTROL_RPM_FAN);
-	param.min = fan_slots->ops->get_min(fan_slots);
-	param.max = fan_slots->ops->get_max(fan_slots);
+	param.min = wf_control_get_min(fan_slots);
+	param.max = wf_control_get_max(fan_slots);
 	wf_pid_init(&wf_smu_slots_fans->pid, &param);
 
 	DBG("wf: Slots Fan control initialized.\n");
@@ -419,7 +416,7 @@ static void wf_smu_slots_fans_tick(struct wf_smu_slots_fans_state *st)
 	}
 	st->ticks = st->pid.param.interval;
 
-	rc = sensor_slots_power->ops->get_value(sensor_slots_power, &power);
+	rc = wf_sensor_get(sensor_slots_power, &power);
 	if (rc) {
 		printk(KERN_WARNING "windfarm: Slots power sensor error %d\n",
 		       rc);
@@ -444,7 +441,7 @@ static void wf_smu_slots_fans_tick(struct wf_smu_slots_fans_state *st)
 	st->setpoint = new_setpoint;
  readjust:
 	if (fan_slots && wf_smu_failure_state == 0) {
-		rc = fan_slots->ops->set_value(fan_slots, st->setpoint);
+		rc = wf_control_set(fan_slots, st->setpoint);
 		if (rc) {
 			printk(KERN_WARNING "windfarm: Slots fan error %d\n",
 			       rc);
diff --git a/drivers/macintosh/windfarm_rm31.c b/drivers/macintosh/windfarm_rm31.c
new file mode 100644
index 000000000000..3eca6d4b52fc
--- /dev/null
+++ b/drivers/macintosh/windfarm_rm31.c
@@ -0,0 +1,740 @@
+/*
+ * Windfarm PowerMac thermal control.
+ * Control loops for RackMack3,1 (Xserve G5)
+ *
+ * Copyright (C) 2012 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * Use and redistribute under the terms of the GNU GPL v2.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <asm/prom.h>
+#include <asm/smu.h>
+
+#include "windfarm.h"
+#include "windfarm_pid.h"
+#include "windfarm_mpu.h"
+
+#define VERSION "1.0"
+
+#undef DEBUG
+#undef LOTSA_DEBUG
+
+#ifdef DEBUG
+#define DBG(args...)	printk(args)
+#else
+#define DBG(args...)	do { } while(0)
+#endif
+
+#ifdef LOTSA_DEBUG
+#define DBG_LOTS(args...)	printk(args)
+#else
+#define DBG_LOTS(args...)	do { } while(0)
+#endif
+
+/* define this to force CPU overtemp to 60 degree, useful for testing
+ * the overtemp code
+ */
+#undef HACKED_OVERTEMP
+
+/* We currently only handle 2 chips */
+#define NR_CHIPS	2
+#define NR_CPU_FANS	3 * NR_CHIPS
+
+/* Controls and sensors */
+static struct wf_sensor *sens_cpu_temp[NR_CHIPS];
+static struct wf_sensor *sens_cpu_volts[NR_CHIPS];
+static struct wf_sensor *sens_cpu_amps[NR_CHIPS];
+static struct wf_sensor *backside_temp;
+static struct wf_sensor *slots_temp;
+static struct wf_sensor *dimms_temp;
+
+static struct wf_control *cpu_fans[NR_CHIPS][3];
+static struct wf_control *backside_fan;
+static struct wf_control *slots_fan;
+static struct wf_control *cpufreq_clamp;
+
+/* We keep a temperature history for average calculation of 180s */
+#define CPU_TEMP_HIST_SIZE	180
+
+/* PID loop state */
+static const struct mpu_data *cpu_mpu_data[NR_CHIPS];
+static struct wf_cpu_pid_state cpu_pid[NR_CHIPS];
+static u32 cpu_thist[CPU_TEMP_HIST_SIZE];
+static int cpu_thist_pt;
+static s64 cpu_thist_total;
+static s32 cpu_all_tmax = 100 << 16;
+static struct wf_pid_state backside_pid;
+static int backside_tick;
+static struct wf_pid_state slots_pid;
+static int slots_tick;
+static int slots_speed;
+static struct wf_pid_state dimms_pid;
+static int dimms_output_clamp;
+
+static int nr_chips;
+static bool have_all_controls;
+static bool have_all_sensors;
+static bool started;
+
+static int failure_state;
+#define FAILURE_SENSOR		1
+#define FAILURE_FAN		2
+#define FAILURE_PERM		4
+#define FAILURE_LOW_OVERTEMP	8
+#define FAILURE_HIGH_OVERTEMP	16
+
+/* Overtemp values */
+#define LOW_OVER_AVERAGE	0
+#define LOW_OVER_IMMEDIATE	(10 << 16)
+#define LOW_OVER_CLEAR		((-10) << 16)
+#define HIGH_OVER_IMMEDIATE	(14 << 16)
+#define HIGH_OVER_AVERAGE	(10 << 16)
+#define HIGH_OVER_IMMEDIATE	(14 << 16)
+
+
+static void cpu_max_all_fans(void)
+{
+	int i;
+
+	/* We max all CPU fans in case of a sensor error. We also do the
+	 * cpufreq clamping now, even if it's supposedly done later by the
+	 * generic code anyway, we do it earlier here to react faster
+	 */
+	if (cpufreq_clamp)
+		wf_control_set_max(cpufreq_clamp);
+	for (i = 0; i < nr_chips; i++) {
+		if (cpu_fans[i][0])
+			wf_control_set_max(cpu_fans[i][0]);
+		if (cpu_fans[i][1])
+			wf_control_set_max(cpu_fans[i][1]);
+		if (cpu_fans[i][2])
+			wf_control_set_max(cpu_fans[i][2]);
+	}
+}
+
+static int cpu_check_overtemp(s32 temp)
+{
+	int new_state = 0;
+	s32 t_avg, t_old;
+	static bool first = true;
+
+	/* First check for immediate overtemps */
+	if (temp >= (cpu_all_tmax + LOW_OVER_IMMEDIATE)) {
+		new_state |= FAILURE_LOW_OVERTEMP;
+		if ((failure_state & FAILURE_LOW_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Overtemp due to immediate CPU"
+			       " temperature !\n");
+	}
+	if (temp >= (cpu_all_tmax + HIGH_OVER_IMMEDIATE)) {
+		new_state |= FAILURE_HIGH_OVERTEMP;
+		if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Critical overtemp due to"
+			       " immediate CPU temperature !\n");
+	}
+
+	/*
+	 * The first time around, initialize the array with the first
+	 * temperature reading
+	 */
+	if (first) {
+		int i;
+
+		cpu_thist_total = 0;
+		for (i = 0; i < CPU_TEMP_HIST_SIZE; i++) {
+			cpu_thist[i] = temp;
+			cpu_thist_total += temp;
+		}
+		first = false;
+	}
+
+	/*
+	 * We calculate a history of max temperatures and use that for the
+	 * overtemp management
+	 */
+	t_old = cpu_thist[cpu_thist_pt];
+	cpu_thist[cpu_thist_pt] = temp;
+	cpu_thist_pt = (cpu_thist_pt + 1) % CPU_TEMP_HIST_SIZE;
+	cpu_thist_total -= t_old;
+	cpu_thist_total += temp;
+	t_avg = cpu_thist_total / CPU_TEMP_HIST_SIZE;
+
+	DBG_LOTS("  t_avg = %d.%03d (out: %d.%03d, in: %d.%03d)\n",
+		 FIX32TOPRINT(t_avg), FIX32TOPRINT(t_old), FIX32TOPRINT(temp));
+
+	/* Now check for average overtemps */
+	if (t_avg >= (cpu_all_tmax + LOW_OVER_AVERAGE)) {
+		new_state |= FAILURE_LOW_OVERTEMP;
+		if ((failure_state & FAILURE_LOW_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Overtemp due to average CPU"
+			       " temperature !\n");
+	}
+	if (t_avg >= (cpu_all_tmax + HIGH_OVER_AVERAGE)) {
+		new_state |= FAILURE_HIGH_OVERTEMP;
+		if ((failure_state & FAILURE_HIGH_OVERTEMP) == 0)
+			printk(KERN_ERR "windfarm: Critical overtemp due to"
+			       " average CPU temperature !\n");
+	}
+
+	/* Now handle overtemp conditions. We don't currently use the windfarm
+	 * overtemp handling core as it's not fully suited to the needs of those
+	 * new machine. This will be fixed later.
+	 */
+	if (new_state) {
+		/* High overtemp -> immediate shutdown */
+		if (new_state & FAILURE_HIGH_OVERTEMP)
+			machine_power_off();
+		if ((failure_state & new_state) != new_state)
+			cpu_max_all_fans();
+		failure_state |= new_state;
+	} else if ((failure_state & FAILURE_LOW_OVERTEMP) &&
+		   (temp < (cpu_all_tmax + LOW_OVER_CLEAR))) {
+		printk(KERN_ERR "windfarm: Overtemp condition cleared !\n");
+		failure_state &= ~FAILURE_LOW_OVERTEMP;
+	}
+
+	return failure_state & (FAILURE_LOW_OVERTEMP | FAILURE_HIGH_OVERTEMP);
+}
+
+static int read_one_cpu_vals(int cpu, s32 *temp, s32 *power)
+{
+	s32 dtemp, volts, amps;
+	int rc;
+
+	/* Get diode temperature */
+	rc = wf_sensor_get(sens_cpu_temp[cpu], &dtemp);
+	if (rc) {
+		DBG("  CPU%d: temp reading error !\n", cpu);
+		return -EIO;
+	}
+	DBG_LOTS("  CPU%d: temp   = %d.%03d\n", cpu, FIX32TOPRINT((dtemp)));
+	*temp = dtemp;
+
+	/* Get voltage */
+	rc = wf_sensor_get(sens_cpu_volts[cpu], &volts);
+	if (rc) {
+		DBG("  CPU%d, volts reading error !\n", cpu);
+		return -EIO;
+	}
+	DBG_LOTS("  CPU%d: volts  = %d.%03d\n", cpu, FIX32TOPRINT((volts)));
+
+	/* Get current */
+	rc = wf_sensor_get(sens_cpu_amps[cpu], &amps);
+	if (rc) {
+		DBG("  CPU%d, current reading error !\n", cpu);
+		return -EIO;
+	}
+	DBG_LOTS("  CPU%d: amps   = %d.%03d\n", cpu, FIX32TOPRINT((amps)));
+
+	/* Calculate power */
+
+	/* Scale voltage and current raw sensor values according to fixed scales
+	 * obtained in Darwin and calculate power from I and V
+	 */
+	*power = (((u64)volts) * ((u64)amps)) >> 16;
+
+	DBG_LOTS("  CPU%d: power  = %d.%03d\n", cpu, FIX32TOPRINT((*power)));
+
+	return 0;
+
+}
+
+static void cpu_fans_tick(void)
+{
+	int err, cpu, i;
+	s32 speed, temp, power, t_max = 0;
+
+	DBG_LOTS("* cpu fans_tick_split()\n");
+
+	for (cpu = 0; cpu < nr_chips; ++cpu) {
+		struct wf_cpu_pid_state *sp = &cpu_pid[cpu];
+
+		/* Read current speed */
+		wf_control_get(cpu_fans[cpu][0], &sp->target);
+
+		err = read_one_cpu_vals(cpu, &temp, &power);
+		if (err) {
+			failure_state |= FAILURE_SENSOR;
+			cpu_max_all_fans();
+			return;
+		}
+
+		/* Keep track of highest temp */
+		t_max = max(t_max, temp);
+
+		/* Handle possible overtemps */
+		if (cpu_check_overtemp(t_max))
+			return;
+
+		/* Run PID */
+		wf_cpu_pid_run(sp, power, temp);
+
+		DBG_LOTS("  CPU%d: target = %d RPM\n", cpu, sp->target);
+
+		/* Apply DIMMs clamp */
+		speed = max(sp->target, dimms_output_clamp);
+
+		/* Apply result to all cpu fans */
+		for (i = 0; i < 3; i++) {
+			err = wf_control_set(cpu_fans[cpu][i], speed);
+			if (err) {
+				pr_warning("wf_rm31: Fan %s reports error %d\n",
+					   cpu_fans[cpu][i]->name, err);
+				failure_state |= FAILURE_FAN;
+			}
+		}
+	}
+}
+
+/* Implementation... */
+static int cpu_setup_pid(int cpu)
+{
+	struct wf_cpu_pid_param pid;
+	const struct mpu_data *mpu = cpu_mpu_data[cpu];
+	s32 tmax, ttarget, ptarget;
+	int fmin, fmax, hsize;
+
+	/* Get PID params from the appropriate MPU EEPROM */
+	tmax = mpu->tmax << 16;
+	ttarget = mpu->ttarget << 16;
+	ptarget = ((s32)(mpu->pmaxh - mpu->padjmax)) << 16;
+
+	DBG("wf_72: CPU%d ttarget = %d.%03d, tmax = %d.%03d\n",
+	    cpu, FIX32TOPRINT(ttarget), FIX32TOPRINT(tmax));
+
+	/* We keep a global tmax for overtemp calculations */
+	if (tmax < cpu_all_tmax)
+		cpu_all_tmax = tmax;
+
+	/* Set PID min/max by using the rear fan min/max */
+	fmin = wf_control_get_min(cpu_fans[cpu][0]);
+	fmax = wf_control_get_max(cpu_fans[cpu][0]);
+	DBG("wf_72: CPU%d max RPM range = [%d..%d]\n", cpu, fmin, fmax);
+
+	/* History size */
+	hsize = min_t(int, mpu->tguardband, WF_PID_MAX_HISTORY);
+	DBG("wf_72: CPU%d history size = %d\n", cpu, hsize);
+
+	/* Initialize PID loop */
+	pid.interval	= 1;	/* seconds */
+	pid.history_len = hsize;
+	pid.gd		= mpu->pid_gd;
+	pid.gp		= mpu->pid_gp;
+	pid.gr		= mpu->pid_gr;
+	pid.tmax	= tmax;
+	pid.ttarget	= ttarget;
+	pid.pmaxadj	= ptarget;
+	pid.min		= fmin;
+	pid.max		= fmax;
+
+	wf_cpu_pid_init(&cpu_pid[cpu], &pid);
+	cpu_pid[cpu].target = 4000;
+	
+	return 0;
+}
+
+/* Backside/U3 fan */
+static struct wf_pid_param backside_param = {
+	.interval	= 1,
+	.history_len	= 2,
+	.gd		= 0x00500000,
+	.gp		= 0x0004cccc,
+	.gr		= 0,
+	.itarget	= 70 << 16,
+	.additive	= 0,
+	.min		= 20,
+	.max		= 100,
+};
+
+/* DIMMs temperature (clamp the backside fan) */
+static struct wf_pid_param dimms_param = {
+	.interval	= 1,
+	.history_len	= 20,
+	.gd		= 0,
+	.gp		= 0,
+	.gr		= 0x06553600,
+	.itarget	= 50 << 16,
+	.additive	= 0,
+	.min		= 4000,
+	.max		= 14000,
+};
+
+static void backside_fan_tick(void)
+{
+	s32 temp, dtemp;
+	int speed, dspeed, fan_min;
+	int err;
+
+	if (!backside_fan || !backside_temp || !dimms_temp || !backside_tick)
+		return;
+	if (--backside_tick > 0)
+		return;
+	backside_tick = backside_pid.param.interval;
+
+	DBG_LOTS("* backside fans tick\n");
+
+	/* Update fan speed from actual fans */
+	err = wf_control_get(backside_fan, &speed);
+	if (!err)
+		backside_pid.target = speed;
+
+	err = wf_sensor_get(backside_temp, &temp);
+	if (err) {
+		printk(KERN_WARNING "windfarm: U3 temp sensor error %d\n",
+		       err);
+		failure_state |= FAILURE_SENSOR;
+		wf_control_set_max(backside_fan);
+		return;
+	}
+	speed = wf_pid_run(&backside_pid, temp);
+
+	DBG_LOTS("backside PID temp=%d.%.3d speed=%d\n",
+		 FIX32TOPRINT(temp), speed);
+
+	err = wf_sensor_get(dimms_temp, &dtemp);
+	if (err) {
+		printk(KERN_WARNING "windfarm: DIMMs temp sensor error %d\n",
+		       err);
+		failure_state |= FAILURE_SENSOR;
+		wf_control_set_max(backside_fan);
+		return;
+	}
+	dspeed = wf_pid_run(&dimms_pid, dtemp);
+	dimms_output_clamp = dspeed;
+
+	fan_min = (dspeed * 100) / 14000;
+	fan_min = max(fan_min, backside_param.min);
+	speed = max(speed, fan_min);
+
+	err = wf_control_set(backside_fan, speed);
+	if (err) {
+		printk(KERN_WARNING "windfarm: backside fan error %d\n", err);
+		failure_state |= FAILURE_FAN;
+	}
+}
+
+static void backside_setup_pid(void)
+{
+	/* first time initialize things */
+	s32 fmin = wf_control_get_min(backside_fan);
+	s32 fmax = wf_control_get_max(backside_fan);
+	struct wf_pid_param param;
+
+	param = backside_param;
+	param.min = max(param.min, fmin);
+	param.max = min(param.max, fmax);
+	wf_pid_init(&backside_pid, &param);
+
+	param = dimms_param;
+	wf_pid_init(&dimms_pid, &param);
+
+	backside_tick = 1;
+
+	pr_info("wf_rm31: Backside control loop started.\n");
+}
+
+/* Slots fan */
+static const struct wf_pid_param slots_param = {
+	.interval	= 5,
+	.history_len	= 2,
+	.gd		= 30 << 20,
+	.gp		= 5 << 20,
+	.gr		= 0,
+	.itarget	= 40 << 16,
+	.additive	= 1,
+	.min		= 300,
+	.max		= 4000,
+};
+
+static void slots_fan_tick(void)
+{
+	s32 temp;
+	int speed;
+	int err;
+
+	if (!slots_fan || !slots_temp || !slots_tick)
+		return;
+	if (--slots_tick > 0)
+		return;
+	slots_tick = slots_pid.param.interval;
+
+	DBG_LOTS("* slots fans tick\n");
+
+	err = wf_sensor_get(slots_temp, &temp);
+	if (err) {
+		pr_warning("wf_rm31: slots temp sensor error %d\n", err);
+		failure_state |= FAILURE_SENSOR;
+		wf_control_set_max(slots_fan);
+		return;
+	}
+	speed = wf_pid_run(&slots_pid, temp);
+
+	DBG_LOTS("slots PID temp=%d.%.3d speed=%d\n",
+		 FIX32TOPRINT(temp), speed);
+
+	slots_speed = speed;
+	err = wf_control_set(slots_fan, speed);
+	if (err) {
+		printk(KERN_WARNING "windfarm: slots bay fan error %d\n", err);
+		failure_state |= FAILURE_FAN;
+	}
+}
+
+static void slots_setup_pid(void)
+{
+	/* first time initialize things */
+	s32 fmin = wf_control_get_min(slots_fan);
+	s32 fmax = wf_control_get_max(slots_fan);
+	struct wf_pid_param param = slots_param;
+
+	param.min = max(param.min, fmin);
+	param.max = min(param.max, fmax);
+	wf_pid_init(&slots_pid, &param);
+	slots_tick = 1;
+
+	pr_info("wf_rm31: Slots control loop started.\n");
+}
+
+static void set_fail_state(void)
+{
+	cpu_max_all_fans();
+
+	if (backside_fan)
+		wf_control_set_max(backside_fan);
+	if (slots_fan)
+		wf_control_set_max(slots_fan);
+}
+
+static void rm31_tick(void)
+{
+	int i, last_failure;
+
+	if (!started) {
+		started = 1;
+		printk(KERN_INFO "windfarm: CPUs control loops started.\n");
+		for (i = 0; i < nr_chips; ++i) {
+			if (cpu_setup_pid(i) < 0) {
+				failure_state = FAILURE_PERM;
+				set_fail_state();
+				break;
+			}
+		}
+		DBG_LOTS("cpu_all_tmax=%d.%03d\n", FIX32TOPRINT(cpu_all_tmax));
+
+		backside_setup_pid();
+		slots_setup_pid();
+
+#ifdef HACKED_OVERTEMP
+		cpu_all_tmax = 60 << 16;
+#endif
+	}
+
+	/* Permanent failure, bail out */
+	if (failure_state & FAILURE_PERM)
+		return;
+
+	/*
+	 * Clear all failure bits except low overtemp which will be eventually
+	 * cleared by the control loop itself
+	 */
+	last_failure = failure_state;
+	failure_state &= FAILURE_LOW_OVERTEMP;
+	backside_fan_tick();
+	slots_fan_tick();
+
+	/* We do CPUs last because they can be clamped high by
+	 * DIMM temperature
+	 */
+	cpu_fans_tick();
+
+	DBG_LOTS("  last_failure: 0x%x, failure_state: %x\n",
+		 last_failure, failure_state);
+
+	/* Check for failures. Any failure causes cpufreq clamping */
+	if (failure_state && last_failure == 0 && cpufreq_clamp)
+		wf_control_set_max(cpufreq_clamp);
+	if (failure_state == 0 && last_failure && cpufreq_clamp)
+		wf_control_set_min(cpufreq_clamp);
+
+	/* That's it for now, we might want to deal with other failures
+	 * differently in the future though
+	 */
+}
+
+static void rm31_new_control(struct wf_control *ct)
+{
+	bool all_controls;
+
+	if (!strcmp(ct->name, "cpu-fan-a-0"))
+		cpu_fans[0][0] = ct;
+	else if (!strcmp(ct->name, "cpu-fan-b-0"))
+		cpu_fans[0][1] = ct;
+	else if (!strcmp(ct->name, "cpu-fan-c-0"))
+		cpu_fans[0][2] = ct;
+	else if (!strcmp(ct->name, "cpu-fan-a-1"))
+		cpu_fans[1][0] = ct;
+	else if (!strcmp(ct->name, "cpu-fan-b-1"))
+		cpu_fans[1][1] = ct;
+	else if (!strcmp(ct->name, "cpu-fan-c-1"))
+		cpu_fans[1][2] = ct;
+	else if (!strcmp(ct->name, "backside-fan"))
+		backside_fan = ct;
+	else if (!strcmp(ct->name, "slots-fan"))
+		slots_fan = ct;
+	else if (!strcmp(ct->name, "cpufreq-clamp"))
+		cpufreq_clamp = ct;
+
+	all_controls =
+		cpu_fans[0][0] &&
+		cpu_fans[0][1] &&
+		cpu_fans[0][2] &&
+		backside_fan &&
+		slots_fan;
+	if (nr_chips > 1)
+		all_controls &=
+			cpu_fans[1][0] &&
+			cpu_fans[1][1] &&
+			cpu_fans[1][2];
+	have_all_controls = all_controls;
+}
+
+
+static void rm31_new_sensor(struct wf_sensor *sr)
+{
+	bool all_sensors;
+
+	if (!strcmp(sr->name, "cpu-diode-temp-0"))
+		sens_cpu_temp[0] = sr;
+	else if (!strcmp(sr->name, "cpu-diode-temp-1"))
+		sens_cpu_temp[1] = sr;
+	else if (!strcmp(sr->name, "cpu-voltage-0"))
+		sens_cpu_volts[0] = sr;
+	else if (!strcmp(sr->name, "cpu-voltage-1"))
+		sens_cpu_volts[1] = sr;
+	else if (!strcmp(sr->name, "cpu-current-0"))
+		sens_cpu_amps[0] = sr;
+	else if (!strcmp(sr->name, "cpu-current-1"))
+		sens_cpu_amps[1] = sr;
+	else if (!strcmp(sr->name, "backside-temp"))
+		backside_temp = sr;
+	else if (!strcmp(sr->name, "slots-temp"))
+		slots_temp = sr;
+	else if (!strcmp(sr->name, "dimms-temp"))
+		dimms_temp = sr;
+
+	all_sensors =
+		sens_cpu_temp[0] &&
+		sens_cpu_volts[0] &&
+		sens_cpu_amps[0] &&
+		backside_temp &&
+		slots_temp &&
+		dimms_temp;
+	if (nr_chips > 1)
+		all_sensors &=
+			sens_cpu_temp[1] &&
+			sens_cpu_volts[1] &&
+			sens_cpu_amps[1];
+
+	have_all_sensors = all_sensors;
+}
+
+static int rm31_wf_notify(struct notifier_block *self,
+			  unsigned long event, void *data)
+{
+	switch (event) {
+	case WF_EVENT_NEW_SENSOR:
+		rm31_new_sensor(data);
+		break;
+	case WF_EVENT_NEW_CONTROL:
+		rm31_new_control(data);
+		break;
+	case WF_EVENT_TICK:
+		if (have_all_controls && have_all_sensors)
+			rm31_tick();
+	}
+	return 0;
+}
+
+static struct notifier_block rm31_events = {
+	.notifier_call = rm31_wf_notify,
+};
+
+static int wf_rm31_probe(struct platform_device *dev)
+{
+	wf_register_client(&rm31_events);
+	return 0;
+}
+
+static int __devexit wf_rm31_remove(struct platform_device *dev)
+{
+	wf_unregister_client(&rm31_events);
+
+	/* should release all sensors and controls */
+	return 0;
+}
+
+static struct platform_driver wf_rm31_driver = {
+	.probe	= wf_rm31_probe,
+	.remove	= wf_rm31_remove,
+	.driver	= {
+		.name = "windfarm",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init wf_rm31_init(void)
+{
+	struct device_node *cpu;
+	int i;
+
+	if (!of_machine_is_compatible("RackMac3,1"))
+		return -ENODEV;
+
+	/* Count the number of CPU cores */
+	nr_chips = 0;
+	for (cpu = NULL; (cpu = of_find_node_by_type(cpu, "cpu")) != NULL; )
+		++nr_chips;
+	if (nr_chips > NR_CHIPS)
+		nr_chips = NR_CHIPS;
+
+	pr_info("windfarm: Initializing for desktop G5 with %d chips\n",
+		nr_chips);
+
+	/* Get MPU data for each CPU */
+	for (i = 0; i < nr_chips; i++) {
+		cpu_mpu_data[i] = wf_get_mpu(i);
+		if (!cpu_mpu_data[i]) {
+			pr_err("wf_rm31: Failed to find MPU data for CPU %d\n", i);
+			return -ENXIO;
+		}
+	}
+
+#ifdef MODULE
+	request_module("windfarm_fcu_controls");
+	request_module("windfarm_lm75_sensor");
+	request_module("windfarm_lm87_sensor");
+	request_module("windfarm_ad7417_sensor");
+	request_module("windfarm_max6690_sensor");
+	request_module("windfarm_cpufreq_clamp");
+#endif /* MODULE */
+
+	platform_driver_register(&wf_rm31_driver);
+	return 0;
+}
+
+static void __exit wf_rm31_exit(void)
+{
+	platform_driver_unregister(&wf_rm31_driver);
+}
+
+module_init(wf_rm31_init);
+module_exit(wf_rm31_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Thermal control for Xserve G5");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:windfarm");
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
index 3c2be5193fd5..c155a54e8638 100644
--- a/drivers/macintosh/windfarm_smu_controls.c
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -172,7 +172,6 @@ static struct smu_fan_control *smu_fan_create(struct device_node *node,
 
 	fct->fan_type = pwm_fan;
 	fct->ctrl.type = pwm_fan ? WF_CONTROL_PWM_FAN : WF_CONTROL_RPM_FAN;
-	sysfs_attr_init(&fct->ctrl.attr.attr);
 
 	/* We use the name & location here the same way we do for SMU sensors,
 	 * see the comment in windfarm_smu_sensors.c. The locations are a bit
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 65a8ff3e1f8e..426e810233d7 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -20,7 +20,7 @@
 
 #include "windfarm.h"
 
-#define VERSION "0.2"
+#define VERSION "1.0"
 
 #define DEBUG
 
@@ -34,11 +34,12 @@
 #define MAX_AGE		msecs_to_jiffies(800)
 
 struct wf_sat {
+	struct kref		ref;
 	int			nr;
-	atomic_t		refcnt;
 	struct mutex		mutex;
 	unsigned long		last_read; /* jiffies when cache last updated */
 	u8			cache[16];
+	struct list_head	sensors;
 	struct i2c_client	*i2c;
 	struct device_node	*node;
 };
@@ -46,11 +47,12 @@ struct wf_sat {
 static struct wf_sat *sats[2];
 
 struct wf_sat_sensor {
-	int		index;
-	int		index2;		/* used for power sensors */
-	int		shift;
-	struct wf_sat	*sat;
-	struct wf_sensor sens;
+	struct list_head	link;
+	int			index;
+	int			index2;		/* used for power sensors */
+	int			shift;
+	struct wf_sat		*sat;
+	struct wf_sensor 	sens;
 };
 
 #define wf_to_sat(c)	container_of(c, struct wf_sat_sensor, sens)
@@ -142,7 +144,7 @@ static int wf_sat_read_cache(struct wf_sat *sat)
 	return 0;
 }
 
-static int wf_sat_get(struct wf_sensor *sr, s32 *value)
+static int wf_sat_sensor_get(struct wf_sensor *sr, s32 *value)
 {
 	struct wf_sat_sensor *sens = wf_to_sat(sr);
 	struct wf_sat *sat = sens->sat;
@@ -175,62 +177,34 @@ static int wf_sat_get(struct wf_sensor *sr, s32 *value)
 	return err;
 }
 
-static void wf_sat_release(struct wf_sensor *sr)
+static void wf_sat_release(struct kref *ref)
+{
+	struct wf_sat *sat = container_of(ref, struct wf_sat, ref);
+
+	if (sat->nr >= 0)
+		sats[sat->nr] = NULL;
+	kfree(sat);
+}
+
+static void wf_sat_sensor_release(struct wf_sensor *sr)
 {
 	struct wf_sat_sensor *sens = wf_to_sat(sr);
 	struct wf_sat *sat = sens->sat;
 
-	if (atomic_dec_and_test(&sat->refcnt)) {
-		if (sat->nr >= 0)
-			sats[sat->nr] = NULL;
-		kfree(sat);
-	}
 	kfree(sens);
+	kref_put(&sat->ref, wf_sat_release);
 }
 
 static struct wf_sensor_ops wf_sat_ops = {
-	.get_value	= wf_sat_get,
-	.release	= wf_sat_release,
+	.get_value	= wf_sat_sensor_get,
+	.release	= wf_sat_sensor_release,
 	.owner		= THIS_MODULE,
 };
 
-static struct i2c_driver wf_sat_driver;
-
-static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
-{
-	struct i2c_board_info info;
-	struct i2c_client *client;
-	const u32 *reg;
-	u8 addr;
-
-	reg = of_get_property(dev, "reg", NULL);
-	if (reg == NULL)
-		return;
-	addr = *reg;
-	DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr);
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = (addr >> 1) & 0x7f;
-	info.platform_data = dev;
-	strlcpy(info.type, "wf_sat", I2C_NAME_SIZE);
-
-	client = i2c_new_device(adapter, &info);
-	if (client == NULL) {
-		printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n");
-		return;
-	}
-
-	/*
-	 * Let i2c-core delete that device on driver removal.
-	 * This is safe because i2c-core holds the core_lock mutex for us.
-	 */
-	list_add_tail(&client->detected, &wf_sat_driver.clients);
-}
-
 static int wf_sat_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
-	struct device_node *dev = client->dev.platform_data;
+	struct device_node *dev = client->dev.of_node;
 	struct wf_sat *sat;
 	struct wf_sat_sensor *sens;
 	const u32 *reg;
@@ -246,9 +220,10 @@ static int wf_sat_probe(struct i2c_client *client,
 		return -ENOMEM;
 	sat->nr = -1;
 	sat->node = of_node_get(dev);
-	atomic_set(&sat->refcnt, 0);
+	kref_init(&sat->ref);
 	mutex_init(&sat->mutex);
 	sat->i2c = client;
+	INIT_LIST_HEAD(&sat->sensors);
 	i2c_set_clientdata(client, sat);
 
 	vsens[0] = vsens[1] = -1;
@@ -310,14 +285,15 @@ static int wf_sat_probe(struct i2c_client *client,
 		sens->index2 = -1;
 		sens->shift = shift;
 		sens->sat = sat;
-		atomic_inc(&sat->refcnt);
 		sens->sens.ops = &wf_sat_ops;
 		sens->sens.name = (char *) (sens + 1);
-		snprintf(sens->sens.name, 16, "%s-%d", name, cpu);
+		snprintf((char *)sens->sens.name, 16, "%s-%d", name, cpu);
 
-		if (wf_register_sensor(&sens->sens)) {
-			atomic_dec(&sat->refcnt);
+		if (wf_register_sensor(&sens->sens))
 			kfree(sens);
+		else {
+			list_add(&sens->link, &sat->sensors);
+			kref_get(&sat->ref);
 		}
 	}
 
@@ -336,14 +312,15 @@ static int wf_sat_probe(struct i2c_client *client,
 		sens->index2 = isens[core];
 		sens->shift = 0;
 		sens->sat = sat;
-		atomic_inc(&sat->refcnt);
 		sens->sens.ops = &wf_sat_ops;
 		sens->sens.name = (char *) (sens + 1);
-		snprintf(sens->sens.name, 16, "cpu-power-%d", cpu);
+		snprintf((char *)sens->sens.name, 16, "cpu-power-%d", cpu);
 
-		if (wf_register_sensor(&sens->sens)) {
-			atomic_dec(&sat->refcnt);
+		if (wf_register_sensor(&sens->sens))
 			kfree(sens);
+		else {
+			list_add(&sens->link, &sat->sensors);
+			kref_get(&sat->ref);
 		}
 	}
 
@@ -353,42 +330,35 @@ static int wf_sat_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int wf_sat_attach(struct i2c_adapter *adapter)
-{
-	struct device_node *busnode, *dev = NULL;
-	struct pmac_i2c_bus *bus;
-
-	bus = pmac_i2c_adapter_to_bus(adapter);
-	if (bus == NULL)
-		return -ENODEV;
-	busnode = pmac_i2c_get_bus_node(bus);
-
-	while ((dev = of_get_next_child(busnode, dev)) != NULL)
-		if (of_device_is_compatible(dev, "smu-sat"))
-			wf_sat_create(adapter, dev);
-	return 0;
-}
-
 static int wf_sat_remove(struct i2c_client *client)
 {
 	struct wf_sat *sat = i2c_get_clientdata(client);
+	struct wf_sat_sensor *sens;
 
-	/* XXX TODO */
-
+	/* release sensors */
+	while(!list_empty(&sat->sensors)) {
+		sens = list_first_entry(&sat->sensors,
+					struct wf_sat_sensor, link);
+		list_del(&sens->link);
+		wf_unregister_sensor(&sens->sens);
+	}
 	sat->i2c = NULL;
+	i2c_set_clientdata(client, NULL);
+	kref_put(&sat->ref, wf_sat_release);
+
 	return 0;
 }
 
 static const struct i2c_device_id wf_sat_id[] = {
-	{ "wf_sat", 0 },
+	{ "MAC,smu-sat", 0 },
 	{ }
 };
+MODULE_DEVICE_TABLE(i2c, wf_sat_id);
 
 static struct i2c_driver wf_sat_driver = {
 	.driver = {
 		.name		= "wf_smu_sat",
 	},
-	.attach_adapter	= wf_sat_attach,
 	.probe		= wf_sat_probe,
 	.remove		= wf_sat_remove,
 	.id_table	= wf_sat_id,
@@ -399,15 +369,13 @@ static int __init sat_sensors_init(void)
 	return i2c_add_driver(&wf_sat_driver);
 }
 
-#if 0	/* uncomment when module_exit() below is uncommented */
 static void __exit sat_sensors_exit(void)
 {
 	i2c_del_driver(&wf_sat_driver);
 }
-#endif
 
 module_init(sat_sensors_init);
-/*module_exit(sat_sensors_exit); Uncomment when cleanup is implemented */
+module_exit(sat_sensors_exit);
 
 MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
 MODULE_DESCRIPTION("SMU satellite sensors for PowerMac thermal control");
diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c
index e6601b886032..b5797308a39b 100644
--- a/drivers/media/video/gspca/ov534_9.c
+++ b/drivers/media/video/gspca/ov534_9.c
@@ -1376,7 +1376,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 				ARRAY_SIZE(ov562x_init_2));
 		reg_w(gspca_dev, 0xe0, 0x00);
 	} else {
-		err("Unknown sensor %04x", sensor_id);
+		pr_err("Unknown sensor %04x", sensor_id);
 		return -EINVAL;
 	}
 
diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c
index 6510110f53d0..304f43ef59eb 100644
--- a/drivers/media/video/hdpvr/hdpvr-core.c
+++ b/drivers/media/video/hdpvr/hdpvr-core.c
@@ -303,7 +303,7 @@ static int hdpvr_probe(struct usb_interface *interface,
 	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev) {
-		err("Out of memory");
+		dev_err(&interface->dev, "Out of memory\n");
 		goto error;
 	}
 
@@ -311,7 +311,7 @@ static int hdpvr_probe(struct usb_interface *interface,
 
 	/* register v4l2_device early so it can be used for printks */
 	if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) {
-		err("v4l2_device_register failed");
+		dev_err(&interface->dev, "v4l2_device_register failed\n");
 		goto error;
 	}
 
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
new file mode 100644
index 000000000000..067f31174a0e
--- /dev/null
+++ b/drivers/memory/Kconfig
@@ -0,0 +1,43 @@
+#
+# Memory devices
+#
+
+menuconfig MEMORY
+	bool "Memory Controller drivers"
+
+if MEMORY
+
+config TI_EMIF
+	tristate "Texas Instruments EMIF driver"
+	depends on ARCH_OMAP2PLUS
+	select DDR
+	help
+	  This driver is for the EMIF module available in Texas Instruments
+	  SoCs. EMIF is an SDRAM controller that, based on its revision,
+	  supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+	  This driver takes care of only LPDDR2 memories presently. The
+	  functions of the driver includes re-configuring AC timing
+	  parameters and other settings during frequency, voltage and
+	  temperature changes
+
+config TEGRA20_MC
+	bool "Tegra20 Memory Controller(MC) driver"
+	default y
+	depends on ARCH_TEGRA_2x_SOC
+	help
+	  This driver is for the Memory Controller(MC) module available
+	  in Tegra20 SoCs, mainly for a address translation fault
+	  analysis, especially for IOMMU/GART(Graphics Address
+	  Relocation Table) module.
+
+config TEGRA30_MC
+	bool "Tegra30 Memory Controller(MC) driver"
+	default y
+	depends on ARCH_TEGRA_3x_SOC
+	help
+	  This driver is for the Memory Controller(MC) module available
+	  in Tegra30 SoCs, mainly for a address translation fault
+	  analysis, especially for IOMMU/SMMU(System Memory Management
+	  Unit) module.
+
+endif
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
new file mode 100644
index 000000000000..42b3ce9d80fc
--- /dev/null
+++ b/drivers/memory/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for memory devices
+#
+
+obj-$(CONFIG_TI_EMIF)		+= emif.o
+obj-$(CONFIG_TEGRA20_MC)	+= tegra20-mc.o
+obj-$(CONFIG_TEGRA30_MC)	+= tegra30-mc.o
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
new file mode 100644
index 000000000000..33a4396b24cb
--- /dev/null
+++ b/drivers/memory/emif.c
@@ -0,0 +1,1670 @@
+/*
+ * EMIF driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/platform_data/emif_plat.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <memory/jedec_ddr.h>
+#include "emif.h"
+
+/**
+ * struct emif_data - Per device static data for driver's use
+ * @duplicate:			Whether the DDR devices attached to this EMIF
+ *				instance are exactly same as that on EMIF1. In
+ *				this case we can save some memory and processing
+ * @temperature_level:		Maximum temperature of LPDDR2 devices attached
+ *				to this EMIF - read from MR4 register. If there
+ *				are two devices attached to this EMIF, this
+ *				value is the maximum of the two temperature
+ *				levels.
+ * @node:			node in the device list
+ * @base:			base address of memory-mapped IO registers.
+ * @dev:			device pointer.
+ * @addressing			table with addressing information from the spec
+ * @regs_cache:			An array of 'struct emif_regs' that stores
+ *				calculated register values for different
+ *				frequencies, to avoid re-calculating them on
+ *				each DVFS transition.
+ * @curr_regs:			The set of register values used in the last
+ *				frequency change (i.e. corresponding to the
+ *				frequency in effect at the moment)
+ * @plat_data:			Pointer to saved platform data.
+ * @debugfs_root:		dentry to the root folder for EMIF in debugfs
+ */
+struct emif_data {
+	u8				duplicate;
+	u8				temperature_level;
+	u8				lpmode;
+	struct list_head		node;
+	unsigned long			irq_state;
+	void __iomem			*base;
+	struct device			*dev;
+	const struct lpddr2_addressing	*addressing;
+	struct emif_regs		*regs_cache[EMIF_MAX_NUM_FREQUENCIES];
+	struct emif_regs		*curr_regs;
+	struct emif_platform_data	*plat_data;
+	struct dentry			*debugfs_root;
+};
+
+static struct emif_data *emif1;
+static spinlock_t	emif_lock;
+static unsigned long	irq_state;
+static u32		t_ck; /* DDR clock period in ps */
+static LIST_HEAD(device_list);
+
+static void do_emif_regdump_show(struct seq_file *s, struct emif_data *emif,
+	struct emif_regs *regs)
+{
+	u32 type = emif->plat_data->device_info->type;
+	u32 ip_rev = emif->plat_data->ip_rev;
+
+	seq_printf(s, "EMIF register cache dump for %dMHz\n",
+		regs->freq/1000000);
+
+	seq_printf(s, "ref_ctrl_shdw\t: 0x%08x\n", regs->ref_ctrl_shdw);
+	seq_printf(s, "sdram_tim1_shdw\t: 0x%08x\n", regs->sdram_tim1_shdw);
+	seq_printf(s, "sdram_tim2_shdw\t: 0x%08x\n", regs->sdram_tim2_shdw);
+	seq_printf(s, "sdram_tim3_shdw\t: 0x%08x\n", regs->sdram_tim3_shdw);
+
+	if (ip_rev == EMIF_4D) {
+		seq_printf(s, "read_idle_ctrl_shdw_normal\t: 0x%08x\n",
+			regs->read_idle_ctrl_shdw_normal);
+		seq_printf(s, "read_idle_ctrl_shdw_volt_ramp\t: 0x%08x\n",
+			regs->read_idle_ctrl_shdw_volt_ramp);
+	} else if (ip_rev == EMIF_4D5) {
+		seq_printf(s, "dll_calib_ctrl_shdw_normal\t: 0x%08x\n",
+			regs->dll_calib_ctrl_shdw_normal);
+		seq_printf(s, "dll_calib_ctrl_shdw_volt_ramp\t: 0x%08x\n",
+			regs->dll_calib_ctrl_shdw_volt_ramp);
+	}
+
+	if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4) {
+		seq_printf(s, "ref_ctrl_shdw_derated\t: 0x%08x\n",
+			regs->ref_ctrl_shdw_derated);
+		seq_printf(s, "sdram_tim1_shdw_derated\t: 0x%08x\n",
+			regs->sdram_tim1_shdw_derated);
+		seq_printf(s, "sdram_tim3_shdw_derated\t: 0x%08x\n",
+			regs->sdram_tim3_shdw_derated);
+	}
+}
+
+static int emif_regdump_show(struct seq_file *s, void *unused)
+{
+	struct emif_data	*emif	= s->private;
+	struct emif_regs	**regs_cache;
+	int			i;
+
+	if (emif->duplicate)
+		regs_cache = emif1->regs_cache;
+	else
+		regs_cache = emif->regs_cache;
+
+	for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
+		do_emif_regdump_show(s, emif, regs_cache[i]);
+		seq_printf(s, "\n");
+	}
+
+	return 0;
+}
+
+static int emif_regdump_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, emif_regdump_show, inode->i_private);
+}
+
+static const struct file_operations emif_regdump_fops = {
+	.open			= emif_regdump_open,
+	.read			= seq_read,
+	.release		= single_release,
+};
+
+static int emif_mr4_show(struct seq_file *s, void *unused)
+{
+	struct emif_data *emif = s->private;
+
+	seq_printf(s, "MR4=%d\n", emif->temperature_level);
+	return 0;
+}
+
+static int emif_mr4_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, emif_mr4_show, inode->i_private);
+}
+
+static const struct file_operations emif_mr4_fops = {
+	.open			= emif_mr4_open,
+	.read			= seq_read,
+	.release		= single_release,
+};
+
+static int __init_or_module emif_debugfs_init(struct emif_data *emif)
+{
+	struct dentry	*dentry;
+	int		ret;
+
+	dentry = debugfs_create_dir(dev_name(emif->dev), NULL);
+	if (IS_ERR(dentry)) {
+		ret = PTR_ERR(dentry);
+		goto err0;
+	}
+	emif->debugfs_root = dentry;
+
+	dentry = debugfs_create_file("regcache_dump", S_IRUGO,
+			emif->debugfs_root, emif, &emif_regdump_fops);
+	if (IS_ERR(dentry)) {
+		ret = PTR_ERR(dentry);
+		goto err1;
+	}
+
+	dentry = debugfs_create_file("mr4", S_IRUGO,
+			emif->debugfs_root, emif, &emif_mr4_fops);
+	if (IS_ERR(dentry)) {
+		ret = PTR_ERR(dentry);
+		goto err1;
+	}
+
+	return 0;
+err1:
+	debugfs_remove_recursive(emif->debugfs_root);
+err0:
+	return ret;
+}
+
+static void __exit emif_debugfs_exit(struct emif_data *emif)
+{
+	debugfs_remove_recursive(emif->debugfs_root);
+	emif->debugfs_root = NULL;
+}
+
+/*
+ * Calculate the period of DDR clock from frequency value
+ */
+static void set_ddr_clk_period(u32 freq)
+{
+	/* Divide 10^12 by frequency to get period in ps */
+	t_ck = (u32)DIV_ROUND_UP_ULL(1000000000000ull, freq);
+}
+
+/*
+ * Get bus width used by EMIF. Note that this may be different from the
+ * bus width of the DDR devices used. For instance two 16-bit DDR devices
+ * may be connected to a given CS of EMIF. In this case bus width as far
+ * as EMIF is concerned is 32, where as the DDR bus width is 16 bits.
+ */
+static u32 get_emif_bus_width(struct emif_data *emif)
+{
+	u32		width;
+	void __iomem	*base = emif->base;
+
+	width = (readl(base + EMIF_SDRAM_CONFIG) & NARROW_MODE_MASK)
+			>> NARROW_MODE_SHIFT;
+	width = width == 0 ? 32 : 16;
+
+	return width;
+}
+
+/*
+ * Get the CL from SDRAM_CONFIG register
+ */
+static u32 get_cl(struct emif_data *emif)
+{
+	u32		cl;
+	void __iomem	*base = emif->base;
+
+	cl = (readl(base + EMIF_SDRAM_CONFIG) & CL_MASK) >> CL_SHIFT;
+
+	return cl;
+}
+
+static void set_lpmode(struct emif_data *emif, u8 lpmode)
+{
+	u32 temp;
+	void __iomem *base = emif->base;
+
+	temp = readl(base + EMIF_POWER_MANAGEMENT_CONTROL);
+	temp &= ~LP_MODE_MASK;
+	temp |= (lpmode << LP_MODE_SHIFT);
+	writel(temp, base + EMIF_POWER_MANAGEMENT_CONTROL);
+}
+
+static void do_freq_update(void)
+{
+	struct emif_data *emif;
+
+	/*
+	 * Workaround for errata i728: Disable LPMODE during FREQ_UPDATE
+	 *
+	 * i728 DESCRIPTION:
+	 * The EMIF automatically puts the SDRAM into self-refresh mode
+	 * after the EMIF has not performed accesses during
+	 * EMIF_PWR_MGMT_CTRL[7:4] REG_SR_TIM number of DDR clock cycles
+	 * and the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set
+	 * to 0x2. If during a small window the following three events
+	 * occur:
+	 * - The SR_TIMING counter expires
+	 * - And frequency change is requested
+	 * - And OCP access is requested
+	 * Then it causes instable clock on the DDR interface.
+	 *
+	 * WORKAROUND
+	 * To avoid the occurrence of the three events, the workaround
+	 * is to disable the self-refresh when requesting a frequency
+	 * change. Before requesting a frequency change the software must
+	 * program EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x0. When the
+	 * frequency change has been done, the software can reprogram
+	 * EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x2
+	 */
+	list_for_each_entry(emif, &device_list, node) {
+		if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
+			set_lpmode(emif, EMIF_LP_MODE_DISABLE);
+	}
+
+	/*
+	 * TODO: Do FREQ_UPDATE here when an API
+	 * is available for this as part of the new
+	 * clock framework
+	 */
+
+	list_for_each_entry(emif, &device_list, node) {
+		if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
+			set_lpmode(emif, EMIF_LP_MODE_SELF_REFRESH);
+	}
+}
+
+/* Find addressing table entry based on the device's type and density */
+static const struct lpddr2_addressing *get_addressing_table(
+	const struct ddr_device_info *device_info)
+{
+	u32		index, type, density;
+
+	type = device_info->type;
+	density = device_info->density;
+
+	switch (type) {
+	case DDR_TYPE_LPDDR2_S4:
+		index = density - 1;
+		break;
+	case DDR_TYPE_LPDDR2_S2:
+		switch (density) {
+		case DDR_DENSITY_1Gb:
+		case DDR_DENSITY_2Gb:
+			index = density + 3;
+			break;
+		default:
+			index = density - 1;
+		}
+		break;
+	default:
+		return NULL;
+	}
+
+	return &lpddr2_jedec_addressing_table[index];
+}
+
+/*
+ * Find the the right timing table from the array of timing
+ * tables of the device using DDR clock frequency
+ */
+static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
+		u32 freq)
+{
+	u32				i, min, max, freq_nearest;
+	const struct lpddr2_timings	*timings = NULL;
+	const struct lpddr2_timings	*timings_arr = emif->plat_data->timings;
+	struct				device *dev = emif->dev;
+
+	/* Start with a very high frequency - 1GHz */
+	freq_nearest = 1000000000;
+
+	/*
+	 * Find the timings table such that:
+	 *  1. the frequency range covers the required frequency(safe) AND
+	 *  2. the max_freq is closest to the required frequency(optimal)
+	 */
+	for (i = 0; i < emif->plat_data->timings_arr_size; i++) {
+		max = timings_arr[i].max_freq;
+		min = timings_arr[i].min_freq;
+		if ((freq >= min) && (freq <= max) && (max < freq_nearest)) {
+			freq_nearest = max;
+			timings = &timings_arr[i];
+		}
+	}
+
+	if (!timings)
+		dev_err(dev, "%s: couldn't find timings for - %dHz\n",
+			__func__, freq);
+
+	dev_dbg(dev, "%s: timings table: freq %d, speed bin freq %d\n",
+		__func__, freq, freq_nearest);
+
+	return timings;
+}
+
+static u32 get_sdram_ref_ctrl_shdw(u32 freq,
+		const struct lpddr2_addressing *addressing)
+{
+	u32 ref_ctrl_shdw = 0, val = 0, freq_khz, t_refi;
+
+	/* Scale down frequency and t_refi to avoid overflow */
+	freq_khz = freq / 1000;
+	t_refi = addressing->tREFI_ns / 100;
+
+	/*
+	 * refresh rate to be set is 'tREFI(in us) * freq in MHz
+	 * division by 10000 to account for change in units
+	 */
+	val = t_refi * freq_khz / 10000;
+	ref_ctrl_shdw |= val << REFRESH_RATE_SHIFT;
+
+	return ref_ctrl_shdw;
+}
+
+static u32 get_sdram_tim_1_shdw(const struct lpddr2_timings *timings,
+		const struct lpddr2_min_tck *min_tck,
+		const struct lpddr2_addressing *addressing)
+{
+	u32 tim1 = 0, val = 0;
+
+	val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
+	tim1 |= val << T_WTR_SHIFT;
+
+	if (addressing->num_banks == B8)
+		val = DIV_ROUND_UP(timings->tFAW, t_ck*4);
+	else
+		val = max(min_tck->tRRD, DIV_ROUND_UP(timings->tRRD, t_ck));
+	tim1 |= (val - 1) << T_RRD_SHIFT;
+
+	val = DIV_ROUND_UP(timings->tRAS_min + timings->tRPab, t_ck) - 1;
+	tim1 |= val << T_RC_SHIFT;
+
+	val = max(min_tck->tRASmin, DIV_ROUND_UP(timings->tRAS_min, t_ck));
+	tim1 |= (val - 1) << T_RAS_SHIFT;
+
+	val = max(min_tck->tWR, DIV_ROUND_UP(timings->tWR, t_ck)) - 1;
+	tim1 |= val << T_WR_SHIFT;
+
+	val = max(min_tck->tRCD, DIV_ROUND_UP(timings->tRCD, t_ck)) - 1;
+	tim1 |= val << T_RCD_SHIFT;
+
+	val = max(min_tck->tRPab, DIV_ROUND_UP(timings->tRPab, t_ck)) - 1;
+	tim1 |= val << T_RP_SHIFT;
+
+	return tim1;
+}
+
+static u32 get_sdram_tim_1_shdw_derated(const struct lpddr2_timings *timings,
+		const struct lpddr2_min_tck *min_tck,
+		const struct lpddr2_addressing *addressing)
+{
+	u32 tim1 = 0, val = 0;
+
+	val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
+	tim1 = val << T_WTR_SHIFT;
+
+	/*
+	 * tFAW is approximately 4 times tRRD. So add 1875*4 = 7500ps
+	 * to tFAW for de-rating
+	 */
+	if (addressing->num_banks == B8) {
+		val = DIV_ROUND_UP(timings->tFAW + 7500, 4 * t_ck) - 1;
+	} else {
+		val = DIV_ROUND_UP(timings->tRRD + 1875, t_ck);
+		val = max(min_tck->tRRD, val) - 1;
+	}
+	tim1 |= val << T_RRD_SHIFT;
+
+	val = DIV_ROUND_UP(timings->tRAS_min + timings->tRPab + 1875, t_ck);
+	tim1 |= (val - 1) << T_RC_SHIFT;
+
+	val = DIV_ROUND_UP(timings->tRAS_min + 1875, t_ck);
+	val = max(min_tck->tRASmin, val) - 1;
+	tim1 |= val << T_RAS_SHIFT;
+
+	val = max(min_tck->tWR, DIV_ROUND_UP(timings->tWR, t_ck)) - 1;
+	tim1 |= val << T_WR_SHIFT;
+
+	val = max(min_tck->tRCD, DIV_ROUND_UP(timings->tRCD + 1875, t_ck));
+	tim1 |= (val - 1) << T_RCD_SHIFT;
+
+	val = max(min_tck->tRPab, DIV_ROUND_UP(timings->tRPab + 1875, t_ck));
+	tim1 |= (val - 1) << T_RP_SHIFT;
+
+	return tim1;
+}
+
+static u32 get_sdram_tim_2_shdw(const struct lpddr2_timings *timings,
+		const struct lpddr2_min_tck *min_tck,
+		const struct lpddr2_addressing *addressing,
+		u32 type)
+{
+	u32 tim2 = 0, val = 0;
+
+	val = min_tck->tCKE - 1;
+	tim2 |= val << T_CKE_SHIFT;
+
+	val = max(min_tck->tRTP, DIV_ROUND_UP(timings->tRTP, t_ck)) - 1;
+	tim2 |= val << T_RTP_SHIFT;
+
+	/* tXSNR = tRFCab_ps + 10 ns(tRFCab_ps for LPDDR2). */
+	val = DIV_ROUND_UP(addressing->tRFCab_ps + 10000, t_ck) - 1;
+	tim2 |= val << T_XSNR_SHIFT;
+
+	/* XSRD same as XSNR for LPDDR2 */
+	tim2 |= val << T_XSRD_SHIFT;
+
+	val = max(min_tck->tXP, DIV_ROUND_UP(timings->tXP, t_ck)) - 1;
+	tim2 |= val << T_XP_SHIFT;
+
+	return tim2;
+}
+
+static u32 get_sdram_tim_3_shdw(const struct lpddr2_timings *timings,
+		const struct lpddr2_min_tck *min_tck,
+		const struct lpddr2_addressing *addressing,
+		u32 type, u32 ip_rev, u32 derated)
+{
+	u32 tim3 = 0, val = 0, t_dqsck;
+
+	val = timings->tRAS_max_ns / addressing->tREFI_ns - 1;
+	val = val > 0xF ? 0xF : val;
+	tim3 |= val << T_RAS_MAX_SHIFT;
+
+	val = DIV_ROUND_UP(addressing->tRFCab_ps, t_ck) - 1;
+	tim3 |= val << T_RFC_SHIFT;
+
+	t_dqsck = (derated == EMIF_DERATED_TIMINGS) ?
+		timings->tDQSCK_max_derated : timings->tDQSCK_max;
+	if (ip_rev == EMIF_4D5)
+		val = DIV_ROUND_UP(t_dqsck + 1000, t_ck) - 1;
+	else
+		val = DIV_ROUND_UP(t_dqsck, t_ck) - 1;
+
+	tim3 |= val << T_TDQSCKMAX_SHIFT;
+
+	val = DIV_ROUND_UP(timings->tZQCS, t_ck) - 1;
+	tim3 |= val << ZQ_ZQCS_SHIFT;
+
+	val = DIV_ROUND_UP(timings->tCKESR, t_ck);
+	val = max(min_tck->tCKESR, val) - 1;
+	tim3 |= val << T_CKESR_SHIFT;
+
+	if (ip_rev == EMIF_4D5) {
+		tim3 |= (EMIF_T_CSTA - 1) << T_CSTA_SHIFT;
+
+		val = DIV_ROUND_UP(EMIF_T_PDLL_UL, 128) - 1;
+		tim3 |= val << T_PDLL_UL_SHIFT;
+	}
+
+	return tim3;
+}
+
+static u32 get_zq_config_reg(const struct lpddr2_addressing *addressing,
+		bool cs1_used, bool cal_resistors_per_cs)
+{
+	u32 zq = 0, val = 0;
+
+	val = EMIF_ZQCS_INTERVAL_US * 1000 / addressing->tREFI_ns;
+	zq |= val << ZQ_REFINTERVAL_SHIFT;
+
+	val = DIV_ROUND_UP(T_ZQCL_DEFAULT_NS, T_ZQCS_DEFAULT_NS) - 1;
+	zq |= val << ZQ_ZQCL_MULT_SHIFT;
+
+	val = DIV_ROUND_UP(T_ZQINIT_DEFAULT_NS, T_ZQCL_DEFAULT_NS) - 1;
+	zq |= val << ZQ_ZQINIT_MULT_SHIFT;
+
+	zq |= ZQ_SFEXITEN_ENABLE << ZQ_SFEXITEN_SHIFT;
+
+	if (cal_resistors_per_cs)
+		zq |= ZQ_DUALCALEN_ENABLE << ZQ_DUALCALEN_SHIFT;
+	else
+		zq |= ZQ_DUALCALEN_DISABLE << ZQ_DUALCALEN_SHIFT;
+
+	zq |= ZQ_CS0EN_MASK; /* CS0 is used for sure */
+
+	val = cs1_used ? 1 : 0;
+	zq |= val << ZQ_CS1EN_SHIFT;
+
+	return zq;
+}
+
+static u32 get_temp_alert_config(const struct lpddr2_addressing *addressing,
+		const struct emif_custom_configs *custom_configs, bool cs1_used,
+		u32 sdram_io_width, u32 emif_bus_width)
+{
+	u32 alert = 0, interval, devcnt;
+
+	if (custom_configs && (custom_configs->mask &
+				EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL))
+		interval = custom_configs->temp_alert_poll_interval_ms;
+	else
+		interval = TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS;
+
+	interval *= 1000000;			/* Convert to ns */
+	interval /= addressing->tREFI_ns;	/* Convert to refresh cycles */
+	alert |= (interval << TA_REFINTERVAL_SHIFT);
+
+	/*
+	 * sdram_io_width is in 'log2(x) - 1' form. Convert emif_bus_width
+	 * also to this form and subtract to get TA_DEVCNT, which is
+	 * in log2(x) form.
+	 */
+	emif_bus_width = __fls(emif_bus_width) - 1;
+	devcnt = emif_bus_width - sdram_io_width;
+	alert |= devcnt << TA_DEVCNT_SHIFT;
+
+	/* DEVWDT is in 'log2(x) - 3' form */
+	alert |= (sdram_io_width - 2) << TA_DEVWDT_SHIFT;
+
+	alert |= 1 << TA_SFEXITEN_SHIFT;
+	alert |= 1 << TA_CS0EN_SHIFT;
+	alert |= (cs1_used ? 1 : 0) << TA_CS1EN_SHIFT;
+
+	return alert;
+}
+
+static u32 get_read_idle_ctrl_shdw(u8 volt_ramp)
+{
+	u32 idle = 0, val = 0;
+
+	/*
+	 * Maximum value in normal conditions and increased frequency
+	 * when voltage is ramping
+	 */
+	if (volt_ramp)
+		val = READ_IDLE_INTERVAL_DVFS / t_ck / 64 - 1;
+	else
+		val = 0x1FF;
+
+	/*
+	 * READ_IDLE_CTRL register in EMIF4D has same offset and fields
+	 * as DLL_CALIB_CTRL in EMIF4D5, so use the same shifts
+	 */
+	idle |= val << DLL_CALIB_INTERVAL_SHIFT;
+	idle |= EMIF_READ_IDLE_LEN_VAL << ACK_WAIT_SHIFT;
+
+	return idle;
+}
+
+static u32 get_dll_calib_ctrl_shdw(u8 volt_ramp)
+{
+	u32 calib = 0, val = 0;
+
+	if (volt_ramp == DDR_VOLTAGE_RAMPING)
+		val = DLL_CALIB_INTERVAL_DVFS / t_ck / 16 - 1;
+	else
+		val = 0; /* Disabled when voltage is stable */
+
+	calib |= val << DLL_CALIB_INTERVAL_SHIFT;
+	calib |= DLL_CALIB_ACK_WAIT_VAL << ACK_WAIT_SHIFT;
+
+	return calib;
+}
+
+static u32 get_ddr_phy_ctrl_1_attilaphy_4d(const struct lpddr2_timings *timings,
+	u32 freq, u8 RL)
+{
+	u32 phy = EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY, val = 0;
+
+	val = RL + DIV_ROUND_UP(timings->tDQSCK_max, t_ck) - 1;
+	phy |= val << READ_LATENCY_SHIFT_4D;
+
+	if (freq <= 100000000)
+		val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY;
+	else if (freq <= 200000000)
+		val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY;
+	else
+		val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY;
+
+	phy |= val << DLL_SLAVE_DLY_CTRL_SHIFT_4D;
+
+	return phy;
+}
+
+static u32 get_phy_ctrl_1_intelliphy_4d5(u32 freq, u8 cl)
+{
+	u32 phy = EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY, half_delay;
+
+	/*
+	 * DLL operates at 266 MHz. If DDR frequency is near 266 MHz,
+	 * half-delay is not needed else set half-delay
+	 */
+	if (freq >= 265000000 && freq < 267000000)
+		half_delay = 0;
+	else
+		half_delay = 1;
+
+	phy |= half_delay << DLL_HALF_DELAY_SHIFT_4D5;
+	phy |= ((cl + DIV_ROUND_UP(EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS,
+			t_ck) - 1) << READ_LATENCY_SHIFT_4D5);
+
+	return phy;
+}
+
+static u32 get_ext_phy_ctrl_2_intelliphy_4d5(void)
+{
+	u32 fifo_we_slave_ratio;
+
+	fifo_we_slave_ratio =  DIV_ROUND_CLOSEST(
+		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+
+	return fifo_we_slave_ratio | fifo_we_slave_ratio << 11 |
+		fifo_we_slave_ratio << 22;
+}
+
+static u32 get_ext_phy_ctrl_3_intelliphy_4d5(void)
+{
+	u32 fifo_we_slave_ratio;
+
+	fifo_we_slave_ratio =  DIV_ROUND_CLOSEST(
+		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+
+	return fifo_we_slave_ratio >> 10 | fifo_we_slave_ratio << 1 |
+		fifo_we_slave_ratio << 12 | fifo_we_slave_ratio << 23;
+}
+
+static u32 get_ext_phy_ctrl_4_intelliphy_4d5(void)
+{
+	u32 fifo_we_slave_ratio;
+
+	fifo_we_slave_ratio =  DIV_ROUND_CLOSEST(
+		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+
+	return fifo_we_slave_ratio >> 9 | fifo_we_slave_ratio << 2 |
+		fifo_we_slave_ratio << 13;
+}
+
+static u32 get_pwr_mgmt_ctrl(u32 freq, struct emif_data *emif, u32 ip_rev)
+{
+	u32 pwr_mgmt_ctrl	= 0, timeout;
+	u32 lpmode		= EMIF_LP_MODE_SELF_REFRESH;
+	u32 timeout_perf	= EMIF_LP_MODE_TIMEOUT_PERFORMANCE;
+	u32 timeout_pwr		= EMIF_LP_MODE_TIMEOUT_POWER;
+	u32 freq_threshold	= EMIF_LP_MODE_FREQ_THRESHOLD;
+
+	struct emif_custom_configs *cust_cfgs = emif->plat_data->custom_configs;
+
+	if (cust_cfgs && (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE)) {
+		lpmode		= cust_cfgs->lpmode;
+		timeout_perf	= cust_cfgs->lpmode_timeout_performance;
+		timeout_pwr	= cust_cfgs->lpmode_timeout_power;
+		freq_threshold  = cust_cfgs->lpmode_freq_threshold;
+	}
+
+	/* Timeout based on DDR frequency */
+	timeout = freq >= freq_threshold ? timeout_perf : timeout_pwr;
+
+	/* The value to be set in register is "log2(timeout) - 3" */
+	if (timeout < 16) {
+		timeout = 0;
+	} else {
+		timeout = __fls(timeout) - 3;
+		if (timeout & (timeout - 1))
+			timeout++;
+	}
+
+	switch (lpmode) {
+	case EMIF_LP_MODE_CLOCK_STOP:
+		pwr_mgmt_ctrl = (timeout << CS_TIM_SHIFT) |
+					SR_TIM_MASK | PD_TIM_MASK;
+		break;
+	case EMIF_LP_MODE_SELF_REFRESH:
+		/* Workaround for errata i735 */
+		if (timeout < 6)
+			timeout = 6;
+
+		pwr_mgmt_ctrl = (timeout << SR_TIM_SHIFT) |
+					CS_TIM_MASK | PD_TIM_MASK;
+		break;
+	case EMIF_LP_MODE_PWR_DN:
+		pwr_mgmt_ctrl = (timeout << PD_TIM_SHIFT) |
+					CS_TIM_MASK | SR_TIM_MASK;
+		break;
+	case EMIF_LP_MODE_DISABLE:
+	default:
+		pwr_mgmt_ctrl = CS_TIM_MASK |
+					PD_TIM_MASK | SR_TIM_MASK;
+	}
+
+	/* No CS_TIM in EMIF_4D5 */
+	if (ip_rev == EMIF_4D5)
+		pwr_mgmt_ctrl &= ~CS_TIM_MASK;
+
+	pwr_mgmt_ctrl |= lpmode << LP_MODE_SHIFT;
+
+	return pwr_mgmt_ctrl;
+}
+
+/*
+ * Get the temperature level of the EMIF instance:
+ * Reads the MR4 register of attached SDRAM parts to find out the temperature
+ * level. If there are two parts attached(one on each CS), then the temperature
+ * level for the EMIF instance is the higher of the two temperatures.
+ */
+static void get_temperature_level(struct emif_data *emif)
+{
+	u32		temp, temperature_level;
+	void __iomem	*base;
+
+	base = emif->base;
+
+	/* Read mode register 4 */
+	writel(DDR_MR4, base + EMIF_LPDDR2_MODE_REG_CONFIG);
+	temperature_level = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
+	temperature_level = (temperature_level & MR4_SDRAM_REF_RATE_MASK) >>
+				MR4_SDRAM_REF_RATE_SHIFT;
+
+	if (emif->plat_data->device_info->cs1_used) {
+		writel(DDR_MR4 | CS_MASK, base + EMIF_LPDDR2_MODE_REG_CONFIG);
+		temp = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
+		temp = (temp & MR4_SDRAM_REF_RATE_MASK)
+				>> MR4_SDRAM_REF_RATE_SHIFT;
+		temperature_level = max(temp, temperature_level);
+	}
+
+	/* treat everything less than nominal(3) in MR4 as nominal */
+	if (unlikely(temperature_level < SDRAM_TEMP_NOMINAL))
+		temperature_level = SDRAM_TEMP_NOMINAL;
+
+	/* if we get reserved value in MR4 persist with the existing value */
+	if (likely(temperature_level != SDRAM_TEMP_RESERVED_4))
+		emif->temperature_level = temperature_level;
+}
+
+/*
+ * Program EMIF shadow registers that are not dependent on temperature
+ * or voltage
+ */
+static void setup_registers(struct emif_data *emif, struct emif_regs *regs)
+{
+	void __iomem	*base = emif->base;
+
+	writel(regs->sdram_tim2_shdw, base + EMIF_SDRAM_TIMING_2_SHDW);
+	writel(regs->phy_ctrl_1_shdw, base + EMIF_DDR_PHY_CTRL_1_SHDW);
+
+	/* Settings specific for EMIF4D5 */
+	if (emif->plat_data->ip_rev != EMIF_4D5)
+		return;
+	writel(regs->ext_phy_ctrl_2_shdw, base + EMIF_EXT_PHY_CTRL_2_SHDW);
+	writel(regs->ext_phy_ctrl_3_shdw, base + EMIF_EXT_PHY_CTRL_3_SHDW);
+	writel(regs->ext_phy_ctrl_4_shdw, base + EMIF_EXT_PHY_CTRL_4_SHDW);
+}
+
+/*
+ * When voltage ramps dll calibration and forced read idle should
+ * happen more often
+ */
+static void setup_volt_sensitive_regs(struct emif_data *emif,
+		struct emif_regs *regs, u32 volt_state)
+{
+	u32		calib_ctrl;
+	void __iomem	*base = emif->base;
+
+	/*
+	 * EMIF_READ_IDLE_CTRL in EMIF4D refers to the same register as
+	 * EMIF_DLL_CALIB_CTRL in EMIF4D5 and dll_calib_ctrl_shadow_*
+	 * is an alias of the respective read_idle_ctrl_shdw_* (members of
+	 * a union). So, the below code takes care of both cases
+	 */
+	if (volt_state == DDR_VOLTAGE_RAMPING)
+		calib_ctrl = regs->dll_calib_ctrl_shdw_volt_ramp;
+	else
+		calib_ctrl = regs->dll_calib_ctrl_shdw_normal;
+
+	writel(calib_ctrl, base + EMIF_DLL_CALIB_CTRL_SHDW);
+}
+
+/*
+ * setup_temperature_sensitive_regs() - set the timings for temperature
+ * sensitive registers. This happens once at initialisation time based
+ * on the temperature at boot time and subsequently based on the temperature
+ * alert interrupt. Temperature alert can happen when the temperature
+ * increases or drops. So this function can have the effect of either
+ * derating the timings or going back to nominal values.
+ */
+static void setup_temperature_sensitive_regs(struct emif_data *emif,
+		struct emif_regs *regs)
+{
+	u32		tim1, tim3, ref_ctrl, type;
+	void __iomem	*base = emif->base;
+	u32		temperature;
+
+	type = emif->plat_data->device_info->type;
+
+	tim1 = regs->sdram_tim1_shdw;
+	tim3 = regs->sdram_tim3_shdw;
+	ref_ctrl = regs->ref_ctrl_shdw;
+
+	/* No de-rating for non-lpddr2 devices */
+	if (type != DDR_TYPE_LPDDR2_S2 && type != DDR_TYPE_LPDDR2_S4)
+		goto out;
+
+	temperature = emif->temperature_level;
+	if (temperature == SDRAM_TEMP_HIGH_DERATE_REFRESH) {
+		ref_ctrl = regs->ref_ctrl_shdw_derated;
+	} else if (temperature == SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS) {
+		tim1 = regs->sdram_tim1_shdw_derated;
+		tim3 = regs->sdram_tim3_shdw_derated;
+		ref_ctrl = regs->ref_ctrl_shdw_derated;
+	}
+
+out:
+	writel(tim1, base + EMIF_SDRAM_TIMING_1_SHDW);
+	writel(tim3, base + EMIF_SDRAM_TIMING_3_SHDW);
+	writel(ref_ctrl, base + EMIF_SDRAM_REFRESH_CTRL_SHDW);
+}
+
+static irqreturn_t handle_temp_alert(void __iomem *base, struct emif_data *emif)
+{
+	u32		old_temp_level;
+	irqreturn_t	ret = IRQ_HANDLED;
+
+	spin_lock_irqsave(&emif_lock, irq_state);
+	old_temp_level = emif->temperature_level;
+	get_temperature_level(emif);
+
+	if (unlikely(emif->temperature_level == old_temp_level)) {
+		goto out;
+	} else if (!emif->curr_regs) {
+		dev_err(emif->dev, "temperature alert before registers are calculated, not de-rating timings\n");
+		goto out;
+	}
+
+	if (emif->temperature_level < old_temp_level ||
+		emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN) {
+		/*
+		 * Temperature coming down - defer handling to thread OR
+		 * Temperature far too high - do kernel_power_off() from
+		 * thread context
+		 */
+		ret = IRQ_WAKE_THREAD;
+	} else {
+		/* Temperature is going up - handle immediately */
+		setup_temperature_sensitive_regs(emif, emif->curr_regs);
+		do_freq_update();
+	}
+
+out:
+	spin_unlock_irqrestore(&emif_lock, irq_state);
+	return ret;
+}
+
+static irqreturn_t emif_interrupt_handler(int irq, void *dev_id)
+{
+	u32			interrupts;
+	struct emif_data	*emif = dev_id;
+	void __iomem		*base = emif->base;
+	struct device		*dev = emif->dev;
+	irqreturn_t		ret = IRQ_HANDLED;
+
+	/* Save the status and clear it */
+	interrupts = readl(base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
+	writel(interrupts, base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
+
+	/*
+	 * Handle temperature alert
+	 * Temperature alert should be same for all ports
+	 * So, it's enough to process it only for one of the ports
+	 */
+	if (interrupts & TA_SYS_MASK)
+		ret = handle_temp_alert(base, emif);
+
+	if (interrupts & ERR_SYS_MASK)
+		dev_err(dev, "Access error from SYS port - %x\n", interrupts);
+
+	if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE) {
+		/* Save the status and clear it */
+		interrupts = readl(base + EMIF_LL_OCP_INTERRUPT_STATUS);
+		writel(interrupts, base + EMIF_LL_OCP_INTERRUPT_STATUS);
+
+		if (interrupts & ERR_LL_MASK)
+			dev_err(dev, "Access error from LL port - %x\n",
+				interrupts);
+	}
+
+	return ret;
+}
+
+static irqreturn_t emif_threaded_isr(int irq, void *dev_id)
+{
+	struct emif_data	*emif = dev_id;
+
+	if (emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN) {
+		dev_emerg(emif->dev, "SDRAM temperature exceeds operating limit.. Needs shut down!!!\n");
+		kernel_power_off();
+		return IRQ_HANDLED;
+	}
+
+	spin_lock_irqsave(&emif_lock, irq_state);
+
+	if (emif->curr_regs) {
+		setup_temperature_sensitive_regs(emif, emif->curr_regs);
+		do_freq_update();
+	} else {
+		dev_err(emif->dev, "temperature alert before registers are calculated, not de-rating timings\n");
+	}
+
+	spin_unlock_irqrestore(&emif_lock, irq_state);
+
+	return IRQ_HANDLED;
+}
+
+static void clear_all_interrupts(struct emif_data *emif)
+{
+	void __iomem	*base = emif->base;
+
+	writel(readl(base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS),
+		base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
+	if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE)
+		writel(readl(base + EMIF_LL_OCP_INTERRUPT_STATUS),
+			base + EMIF_LL_OCP_INTERRUPT_STATUS);
+}
+
+static void disable_and_clear_all_interrupts(struct emif_data *emif)
+{
+	void __iomem		*base = emif->base;
+
+	/* Disable all interrupts */
+	writel(readl(base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET),
+		base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR);
+	if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE)
+		writel(readl(base + EMIF_LL_OCP_INTERRUPT_ENABLE_SET),
+			base + EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR);
+
+	/* Clear all interrupts */
+	clear_all_interrupts(emif);
+}
+
+static int __init_or_module setup_interrupts(struct emif_data *emif, u32 irq)
+{
+	u32		interrupts, type;
+	void __iomem	*base = emif->base;
+
+	type = emif->plat_data->device_info->type;
+
+	clear_all_interrupts(emif);
+
+	/* Enable interrupts for SYS interface */
+	interrupts = EN_ERR_SYS_MASK;
+	if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4)
+		interrupts |= EN_TA_SYS_MASK;
+	writel(interrupts, base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET);
+
+	/* Enable interrupts for LL interface */
+	if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE) {
+		/* TA need not be enabled for LL */
+		interrupts = EN_ERR_LL_MASK;
+		writel(interrupts, base + EMIF_LL_OCP_INTERRUPT_ENABLE_SET);
+	}
+
+	/* setup IRQ handlers */
+	return devm_request_threaded_irq(emif->dev, irq,
+				    emif_interrupt_handler,
+				    emif_threaded_isr,
+				    0, dev_name(emif->dev),
+				    emif);
+
+}
+
+static void __init_or_module emif_onetime_settings(struct emif_data *emif)
+{
+	u32				pwr_mgmt_ctrl, zq, temp_alert_cfg;
+	void __iomem			*base = emif->base;
+	const struct lpddr2_addressing	*addressing;
+	const struct ddr_device_info	*device_info;
+
+	device_info = emif->plat_data->device_info;
+	addressing = get_addressing_table(device_info);
+
+	/*
+	 * Init power management settings
+	 * We don't know the frequency yet. Use a high frequency
+	 * value for a conservative timeout setting
+	 */
+	pwr_mgmt_ctrl = get_pwr_mgmt_ctrl(1000000000, emif,
+			emif->plat_data->ip_rev);
+	emif->lpmode = (pwr_mgmt_ctrl & LP_MODE_MASK) >> LP_MODE_SHIFT;
+	writel(pwr_mgmt_ctrl, base + EMIF_POWER_MANAGEMENT_CONTROL);
+
+	/* Init ZQ calibration settings */
+	zq = get_zq_config_reg(addressing, device_info->cs1_used,
+		device_info->cal_resistors_per_cs);
+	writel(zq, base + EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG);
+
+	/* Check temperature level temperature level*/
+	get_temperature_level(emif);
+	if (emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN)
+		dev_emerg(emif->dev, "SDRAM temperature exceeds operating limit.. Needs shut down!!!\n");
+
+	/* Init temperature polling */
+	temp_alert_cfg = get_temp_alert_config(addressing,
+		emif->plat_data->custom_configs, device_info->cs1_used,
+		device_info->io_width, get_emif_bus_width(emif));
+	writel(temp_alert_cfg, base + EMIF_TEMPERATURE_ALERT_CONFIG);
+
+	/*
+	 * Program external PHY control registers that are not frequency
+	 * dependent
+	 */
+	if (emif->plat_data->phy_type != EMIF_PHY_TYPE_INTELLIPHY)
+		return;
+	writel(EMIF_EXT_PHY_CTRL_1_VAL, base + EMIF_EXT_PHY_CTRL_1_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_5_VAL, base + EMIF_EXT_PHY_CTRL_5_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_6_VAL, base + EMIF_EXT_PHY_CTRL_6_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_7_VAL, base + EMIF_EXT_PHY_CTRL_7_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_8_VAL, base + EMIF_EXT_PHY_CTRL_8_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_9_VAL, base + EMIF_EXT_PHY_CTRL_9_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_10_VAL, base + EMIF_EXT_PHY_CTRL_10_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_11_VAL, base + EMIF_EXT_PHY_CTRL_11_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_12_VAL, base + EMIF_EXT_PHY_CTRL_12_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_13_VAL, base + EMIF_EXT_PHY_CTRL_13_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_14_VAL, base + EMIF_EXT_PHY_CTRL_14_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_15_VAL, base + EMIF_EXT_PHY_CTRL_15_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_16_VAL, base + EMIF_EXT_PHY_CTRL_16_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_17_VAL, base + EMIF_EXT_PHY_CTRL_17_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_18_VAL, base + EMIF_EXT_PHY_CTRL_18_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_19_VAL, base + EMIF_EXT_PHY_CTRL_19_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_20_VAL, base + EMIF_EXT_PHY_CTRL_20_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_21_VAL, base + EMIF_EXT_PHY_CTRL_21_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_22_VAL, base + EMIF_EXT_PHY_CTRL_22_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_23_VAL, base + EMIF_EXT_PHY_CTRL_23_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_24_VAL, base + EMIF_EXT_PHY_CTRL_24_SHDW);
+}
+
+static void get_default_timings(struct emif_data *emif)
+{
+	struct emif_platform_data *pd = emif->plat_data;
+
+	pd->timings		= lpddr2_jedec_timings;
+	pd->timings_arr_size	= ARRAY_SIZE(lpddr2_jedec_timings);
+
+	dev_warn(emif->dev, "%s: using default timings\n", __func__);
+}
+
+static int is_dev_data_valid(u32 type, u32 density, u32 io_width, u32 phy_type,
+		u32 ip_rev, struct device *dev)
+{
+	int valid;
+
+	valid = (type == DDR_TYPE_LPDDR2_S4 ||
+			type == DDR_TYPE_LPDDR2_S2)
+		&& (density >= DDR_DENSITY_64Mb
+			&& density <= DDR_DENSITY_8Gb)
+		&& (io_width >= DDR_IO_WIDTH_8
+			&& io_width <= DDR_IO_WIDTH_32);
+
+	/* Combinations of EMIF and PHY revisions that we support today */
+	switch (ip_rev) {
+	case EMIF_4D:
+		valid = valid && (phy_type == EMIF_PHY_TYPE_ATTILAPHY);
+		break;
+	case EMIF_4D5:
+		valid = valid && (phy_type == EMIF_PHY_TYPE_INTELLIPHY);
+		break;
+	default:
+		valid = 0;
+	}
+
+	if (!valid)
+		dev_err(dev, "%s: invalid DDR details\n", __func__);
+	return valid;
+}
+
+static int is_custom_config_valid(struct emif_custom_configs *cust_cfgs,
+		struct device *dev)
+{
+	int valid = 1;
+
+	if ((cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE) &&
+		(cust_cfgs->lpmode != EMIF_LP_MODE_DISABLE))
+		valid = cust_cfgs->lpmode_freq_threshold &&
+			cust_cfgs->lpmode_timeout_performance &&
+			cust_cfgs->lpmode_timeout_power;
+
+	if (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL)
+		valid = valid && cust_cfgs->temp_alert_poll_interval_ms;
+
+	if (!valid)
+		dev_warn(dev, "%s: invalid custom configs\n", __func__);
+
+	return valid;
+}
+
+static struct emif_data *__init_or_module get_device_details(
+		struct platform_device *pdev)
+{
+	u32				size;
+	struct emif_data		*emif = NULL;
+	struct ddr_device_info		*dev_info;
+	struct emif_custom_configs	*cust_cfgs;
+	struct emif_platform_data	*pd;
+	struct device			*dev;
+	void				*temp;
+
+	pd = pdev->dev.platform_data;
+	dev = &pdev->dev;
+
+	if (!(pd && pd->device_info && is_dev_data_valid(pd->device_info->type,
+			pd->device_info->density, pd->device_info->io_width,
+			pd->phy_type, pd->ip_rev, dev))) {
+		dev_err(dev, "%s: invalid device data\n", __func__);
+		goto error;
+	}
+
+	emif	= devm_kzalloc(dev, sizeof(*emif), GFP_KERNEL);
+	temp	= devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+	dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
+
+	if (!emif || !pd || !dev_info) {
+		dev_err(dev, "%s:%d: allocation error\n", __func__, __LINE__);
+		goto error;
+	}
+
+	memcpy(temp, pd, sizeof(*pd));
+	pd = temp;
+	memcpy(dev_info, pd->device_info, sizeof(*dev_info));
+
+	pd->device_info		= dev_info;
+	emif->plat_data		= pd;
+	emif->dev		= dev;
+	emif->temperature_level	= SDRAM_TEMP_NOMINAL;
+
+	/*
+	 * For EMIF instances other than EMIF1 see if the devices connected
+	 * are exactly same as on EMIF1(which is typically the case). If so,
+	 * mark it as a duplicate of EMIF1 and skip copying timings data.
+	 * This will save some memory and some computation later.
+	 */
+	emif->duplicate = emif1 && (memcmp(dev_info,
+		emif1->plat_data->device_info,
+		sizeof(struct ddr_device_info)) == 0);
+
+	if (emif->duplicate) {
+		pd->timings = NULL;
+		pd->min_tck = NULL;
+		goto out;
+	} else if (emif1) {
+		dev_warn(emif->dev, "%s: Non-symmetric DDR geometry\n",
+			__func__);
+	}
+
+	/*
+	 * Copy custom configs - ignore allocation error, if any, as
+	 * custom_configs is not very critical
+	 */
+	cust_cfgs = pd->custom_configs;
+	if (cust_cfgs && is_custom_config_valid(cust_cfgs, dev)) {
+		temp = devm_kzalloc(dev, sizeof(*cust_cfgs), GFP_KERNEL);
+		if (temp)
+			memcpy(temp, cust_cfgs, sizeof(*cust_cfgs));
+		else
+			dev_warn(dev, "%s:%d: allocation error\n", __func__,
+				__LINE__);
+		pd->custom_configs = temp;
+	}
+
+	/*
+	 * Copy timings and min-tck values from platform data. If it is not
+	 * available or if memory allocation fails, use JEDEC defaults
+	 */
+	size = sizeof(struct lpddr2_timings) * pd->timings_arr_size;
+	if (pd->timings) {
+		temp = devm_kzalloc(dev, size, GFP_KERNEL);
+		if (temp) {
+			memcpy(temp, pd->timings, sizeof(*pd->timings));
+			pd->timings = temp;
+		} else {
+			dev_warn(dev, "%s:%d: allocation error\n", __func__,
+				__LINE__);
+			get_default_timings(emif);
+		}
+	} else {
+		get_default_timings(emif);
+	}
+
+	if (pd->min_tck) {
+		temp = devm_kzalloc(dev, sizeof(*pd->min_tck), GFP_KERNEL);
+		if (temp) {
+			memcpy(temp, pd->min_tck, sizeof(*pd->min_tck));
+			pd->min_tck = temp;
+		} else {
+			dev_warn(dev, "%s:%d: allocation error\n", __func__,
+				__LINE__);
+			pd->min_tck = &lpddr2_jedec_min_tck;
+		}
+	} else {
+		pd->min_tck = &lpddr2_jedec_min_tck;
+	}
+
+out:
+	return emif;
+
+error:
+	return NULL;
+}
+
+static int __init_or_module emif_probe(struct platform_device *pdev)
+{
+	struct emif_data	*emif;
+	struct resource		*res;
+	int			irq;
+
+	emif = get_device_details(pdev);
+	if (!emif) {
+		pr_err("%s: error getting device data\n", __func__);
+		goto error;
+	}
+
+	list_add(&emif->node, &device_list);
+	emif->addressing = get_addressing_table(emif->plat_data->device_info);
+
+	/* Save pointers to each other in emif and device structures */
+	emif->dev = &pdev->dev;
+	platform_set_drvdata(pdev, emif);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(emif->dev, "%s: error getting memory resource\n",
+			__func__);
+		goto error;
+	}
+
+	emif->base = devm_request_and_ioremap(emif->dev, res);
+	if (!emif->base) {
+		dev_err(emif->dev, "%s: devm_request_and_ioremap() failed\n",
+			__func__);
+		goto error;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(emif->dev, "%s: error getting IRQ resource - %d\n",
+			__func__, irq);
+		goto error;
+	}
+
+	emif_onetime_settings(emif);
+	emif_debugfs_init(emif);
+	disable_and_clear_all_interrupts(emif);
+	setup_interrupts(emif, irq);
+
+	/* One-time actions taken on probing the first device */
+	if (!emif1) {
+		emif1 = emif;
+		spin_lock_init(&emif_lock);
+
+		/*
+		 * TODO: register notifiers for frequency and voltage
+		 * change here once the respective frameworks are
+		 * available
+		 */
+	}
+
+	dev_info(&pdev->dev, "%s: device configured with addr = %p and IRQ%d\n",
+		__func__, emif->base, irq);
+
+	return 0;
+error:
+	return -ENODEV;
+}
+
+static int __exit emif_remove(struct platform_device *pdev)
+{
+	struct emif_data *emif = platform_get_drvdata(pdev);
+
+	emif_debugfs_exit(emif);
+
+	return 0;
+}
+
+static void emif_shutdown(struct platform_device *pdev)
+{
+	struct emif_data	*emif = platform_get_drvdata(pdev);
+
+	disable_and_clear_all_interrupts(emif);
+}
+
+static int get_emif_reg_values(struct emif_data *emif, u32 freq,
+		struct emif_regs *regs)
+{
+	u32				cs1_used, ip_rev, phy_type;
+	u32				cl, type;
+	const struct lpddr2_timings	*timings;
+	const struct lpddr2_min_tck	*min_tck;
+	const struct ddr_device_info	*device_info;
+	const struct lpddr2_addressing	*addressing;
+	struct emif_data		*emif_for_calc;
+	struct device			*dev;
+	const struct emif_custom_configs *custom_configs;
+
+	dev = emif->dev;
+	/*
+	 * If the devices on this EMIF instance is duplicate of EMIF1,
+	 * use EMIF1 details for the calculation
+	 */
+	emif_for_calc	= emif->duplicate ? emif1 : emif;
+	timings		= get_timings_table(emif_for_calc, freq);
+	addressing	= emif_for_calc->addressing;
+	if (!timings || !addressing) {
+		dev_err(dev, "%s: not enough data available for %dHz",
+			__func__, freq);
+		return -1;
+	}
+
+	device_info	= emif_for_calc->plat_data->device_info;
+	type		= device_info->type;
+	cs1_used	= device_info->cs1_used;
+	ip_rev		= emif_for_calc->plat_data->ip_rev;
+	phy_type	= emif_for_calc->plat_data->phy_type;
+
+	min_tck		= emif_for_calc->plat_data->min_tck;
+	custom_configs	= emif_for_calc->plat_data->custom_configs;
+
+	set_ddr_clk_period(freq);
+
+	regs->ref_ctrl_shdw = get_sdram_ref_ctrl_shdw(freq, addressing);
+	regs->sdram_tim1_shdw = get_sdram_tim_1_shdw(timings, min_tck,
+			addressing);
+	regs->sdram_tim2_shdw = get_sdram_tim_2_shdw(timings, min_tck,
+			addressing, type);
+	regs->sdram_tim3_shdw = get_sdram_tim_3_shdw(timings, min_tck,
+		addressing, type, ip_rev, EMIF_NORMAL_TIMINGS);
+
+	cl = get_cl(emif);
+
+	if (phy_type == EMIF_PHY_TYPE_ATTILAPHY && ip_rev == EMIF_4D) {
+		regs->phy_ctrl_1_shdw = get_ddr_phy_ctrl_1_attilaphy_4d(
+			timings, freq, cl);
+	} else if (phy_type == EMIF_PHY_TYPE_INTELLIPHY && ip_rev == EMIF_4D5) {
+		regs->phy_ctrl_1_shdw = get_phy_ctrl_1_intelliphy_4d5(freq, cl);
+		regs->ext_phy_ctrl_2_shdw = get_ext_phy_ctrl_2_intelliphy_4d5();
+		regs->ext_phy_ctrl_3_shdw = get_ext_phy_ctrl_3_intelliphy_4d5();
+		regs->ext_phy_ctrl_4_shdw = get_ext_phy_ctrl_4_intelliphy_4d5();
+	} else {
+		return -1;
+	}
+
+	/* Only timeout values in pwr_mgmt_ctrl_shdw register */
+	regs->pwr_mgmt_ctrl_shdw =
+		get_pwr_mgmt_ctrl(freq, emif_for_calc, ip_rev) &
+		(CS_TIM_MASK | SR_TIM_MASK | PD_TIM_MASK);
+
+	if (ip_rev & EMIF_4D) {
+		regs->read_idle_ctrl_shdw_normal =
+			get_read_idle_ctrl_shdw(DDR_VOLTAGE_STABLE);
+
+		regs->read_idle_ctrl_shdw_volt_ramp =
+			get_read_idle_ctrl_shdw(DDR_VOLTAGE_RAMPING);
+	} else if (ip_rev & EMIF_4D5) {
+		regs->dll_calib_ctrl_shdw_normal =
+			get_dll_calib_ctrl_shdw(DDR_VOLTAGE_STABLE);
+
+		regs->dll_calib_ctrl_shdw_volt_ramp =
+			get_dll_calib_ctrl_shdw(DDR_VOLTAGE_RAMPING);
+	}
+
+	if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4) {
+		regs->ref_ctrl_shdw_derated = get_sdram_ref_ctrl_shdw(freq / 4,
+			addressing);
+
+		regs->sdram_tim1_shdw_derated =
+			get_sdram_tim_1_shdw_derated(timings, min_tck,
+				addressing);
+
+		regs->sdram_tim3_shdw_derated = get_sdram_tim_3_shdw(timings,
+			min_tck, addressing, type, ip_rev,
+			EMIF_DERATED_TIMINGS);
+	}
+
+	regs->freq = freq;
+
+	return 0;
+}
+
+/*
+ * get_regs() - gets the cached emif_regs structure for a given EMIF instance
+ * given frequency(freq):
+ *
+ * As an optimisation, every EMIF instance other than EMIF1 shares the
+ * register cache with EMIF1 if the devices connected on this instance
+ * are same as that on EMIF1(indicated by the duplicate flag)
+ *
+ * If we do not have an entry corresponding to the frequency given, we
+ * allocate a new entry and calculate the values
+ *
+ * Upon finding the right reg dump, save it in curr_regs. It can be
+ * directly used for thermal de-rating and voltage ramping changes.
+ */
+static struct emif_regs *get_regs(struct emif_data *emif, u32 freq)
+{
+	int			i;
+	struct emif_regs	**regs_cache;
+	struct emif_regs	*regs = NULL;
+	struct device		*dev;
+
+	dev = emif->dev;
+	if (emif->curr_regs && emif->curr_regs->freq == freq) {
+		dev_dbg(dev, "%s: using curr_regs - %u Hz", __func__, freq);
+		return emif->curr_regs;
+	}
+
+	if (emif->duplicate)
+		regs_cache = emif1->regs_cache;
+	else
+		regs_cache = emif->regs_cache;
+
+	for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
+		if (regs_cache[i]->freq == freq) {
+			regs = regs_cache[i];
+			dev_dbg(dev,
+				"%s: reg dump found in reg cache for %u Hz\n",
+				__func__, freq);
+			break;
+		}
+	}
+
+	/*
+	 * If we don't have an entry for this frequency in the cache create one
+	 * and calculate the values
+	 */
+	if (!regs) {
+		regs = devm_kzalloc(emif->dev, sizeof(*regs), GFP_ATOMIC);
+		if (!regs)
+			return NULL;
+
+		if (get_emif_reg_values(emif, freq, regs)) {
+			devm_kfree(emif->dev, regs);
+			return NULL;
+		}
+
+		/*
+		 * Now look for an un-used entry in the cache and save the
+		 * newly created struct. If there are no free entries
+		 * over-write the last entry
+		 */
+		for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++)
+			;
+
+		if (i >= EMIF_MAX_NUM_FREQUENCIES) {
+			dev_warn(dev, "%s: regs_cache full - reusing a slot!!\n",
+				__func__);
+			i = EMIF_MAX_NUM_FREQUENCIES - 1;
+			devm_kfree(emif->dev, regs_cache[i]);
+		}
+		regs_cache[i] = regs;
+	}
+
+	return regs;
+}
+
+static void do_volt_notify_handling(struct emif_data *emif, u32 volt_state)
+{
+	dev_dbg(emif->dev, "%s: voltage notification : %d", __func__,
+		volt_state);
+
+	if (!emif->curr_regs) {
+		dev_err(emif->dev,
+			"%s: volt-notify before registers are ready: %d\n",
+			__func__, volt_state);
+		return;
+	}
+
+	setup_volt_sensitive_regs(emif, emif->curr_regs, volt_state);
+}
+
+/*
+ * TODO: voltage notify handling should be hooked up to
+ * regulator framework as soon as the necessary support
+ * is available in mainline kernel. This function is un-used
+ * right now.
+ */
+static void __attribute__((unused)) volt_notify_handling(u32 volt_state)
+{
+	struct emif_data *emif;
+
+	spin_lock_irqsave(&emif_lock, irq_state);
+
+	list_for_each_entry(emif, &device_list, node)
+		do_volt_notify_handling(emif, volt_state);
+	do_freq_update();
+
+	spin_unlock_irqrestore(&emif_lock, irq_state);
+}
+
+static void do_freq_pre_notify_handling(struct emif_data *emif, u32 new_freq)
+{
+	struct emif_regs *regs;
+
+	regs = get_regs(emif, new_freq);
+	if (!regs)
+		return;
+
+	emif->curr_regs = regs;
+
+	/*
+	 * Update the shadow registers:
+	 * Temperature and voltage-ramp sensitive settings are also configured
+	 * in terms of DDR cycles. So, we need to update them too when there
+	 * is a freq change
+	 */
+	dev_dbg(emif->dev, "%s: setting up shadow registers for %uHz",
+		__func__, new_freq);
+	setup_registers(emif, regs);
+	setup_temperature_sensitive_regs(emif, regs);
+	setup_volt_sensitive_regs(emif, regs, DDR_VOLTAGE_STABLE);
+
+	/*
+	 * Part of workaround for errata i728. See do_freq_update()
+	 * for more details
+	 */
+	if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
+		set_lpmode(emif, EMIF_LP_MODE_DISABLE);
+}
+
+/*
+ * TODO: frequency notify handling should be hooked up to
+ * clock framework as soon as the necessary support is
+ * available in mainline kernel. This function is un-used
+ * right now.
+ */
+static void __attribute__((unused)) freq_pre_notify_handling(u32 new_freq)
+{
+	struct emif_data *emif;
+
+	/*
+	 * NOTE: we are taking the spin-lock here and releases it
+	 * only in post-notifier. This doesn't look good and
+	 * Sparse complains about it, but this seems to be
+	 * un-avoidable. We need to lock a sequence of events
+	 * that is split between EMIF and clock framework.
+	 *
+	 * 1. EMIF driver updates EMIF timings in shadow registers in the
+	 *    frequency pre-notify callback from clock framework
+	 * 2. clock framework sets up the registers for the new frequency
+	 * 3. clock framework initiates a hw-sequence that updates
+	 *    the frequency EMIF timings synchronously.
+	 *
+	 * All these 3 steps should be performed as an atomic operation
+	 * vis-a-vis similar sequence in the EMIF interrupt handler
+	 * for temperature events. Otherwise, there could be race
+	 * conditions that could result in incorrect EMIF timings for
+	 * a given frequency
+	 */
+	spin_lock_irqsave(&emif_lock, irq_state);
+
+	list_for_each_entry(emif, &device_list, node)
+		do_freq_pre_notify_handling(emif, new_freq);
+}
+
+static void do_freq_post_notify_handling(struct emif_data *emif)
+{
+	/*
+	 * Part of workaround for errata i728. See do_freq_update()
+	 * for more details
+	 */
+	if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
+		set_lpmode(emif, EMIF_LP_MODE_SELF_REFRESH);
+}
+
+/*
+ * TODO: frequency notify handling should be hooked up to
+ * clock framework as soon as the necessary support is
+ * available in mainline kernel. This function is un-used
+ * right now.
+ */
+static void __attribute__((unused)) freq_post_notify_handling(void)
+{
+	struct emif_data *emif;
+
+	list_for_each_entry(emif, &device_list, node)
+		do_freq_post_notify_handling(emif);
+
+	/*
+	 * Lock is done in pre-notify handler. See freq_pre_notify_handling()
+	 * for more details
+	 */
+	spin_unlock_irqrestore(&emif_lock, irq_state);
+}
+
+static struct platform_driver emif_driver = {
+	.remove		= __exit_p(emif_remove),
+	.shutdown	= emif_shutdown,
+	.driver = {
+		.name = "emif",
+	},
+};
+
+static int __init_or_module emif_register(void)
+{
+	return platform_driver_probe(&emif_driver, emif_probe);
+}
+
+static void __exit emif_unregister(void)
+{
+	platform_driver_unregister(&emif_driver);
+}
+
+module_init(emif_register);
+module_exit(emif_unregister);
+MODULE_DESCRIPTION("TI EMIF SDRAM Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:emif");
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/drivers/memory/emif.h b/drivers/memory/emif.h
new file mode 100644
index 000000000000..bfe08bae961a
--- /dev/null
+++ b/drivers/memory/emif.h
@@ -0,0 +1,589 @@
+/*
+ * Defines for the EMIF driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __EMIF_H
+#define __EMIF_H
+
+/*
+ * Maximum number of different frequencies supported by EMIF driver
+ * Determines the number of entries in the pointer array for register
+ * cache
+ */
+#define EMIF_MAX_NUM_FREQUENCIES			6
+
+/* State of the core voltage */
+#define DDR_VOLTAGE_STABLE				0
+#define DDR_VOLTAGE_RAMPING				1
+
+/* Defines for timing De-rating */
+#define EMIF_NORMAL_TIMINGS				0
+#define EMIF_DERATED_TIMINGS				1
+
+/* Length of the forced read idle period in terms of cycles */
+#define EMIF_READ_IDLE_LEN_VAL				5
+
+/*
+ * forced read idle interval to be used when voltage
+ * is changed as part of DVFS/DPS - 1ms
+ */
+#define READ_IDLE_INTERVAL_DVFS				(1*1000000)
+
+/*
+ * Forced read idle interval to be used when voltage is stable
+ * 50us - or maximum value will do
+ */
+#define READ_IDLE_INTERVAL_NORMAL			(50*1000000)
+
+/* DLL calibration interval when voltage is NOT stable - 1us */
+#define DLL_CALIB_INTERVAL_DVFS				(1*1000000)
+
+#define DLL_CALIB_ACK_WAIT_VAL				5
+
+/* Interval between ZQCS commands - hw team recommended value */
+#define EMIF_ZQCS_INTERVAL_US				(50*1000)
+/* Enable ZQ Calibration on exiting Self-refresh */
+#define ZQ_SFEXITEN_ENABLE				1
+/*
+ * ZQ Calibration simultaneously on both chip-selects:
+ * Needs one calibration resistor per CS
+ */
+#define	ZQ_DUALCALEN_DISABLE				0
+#define	ZQ_DUALCALEN_ENABLE				1
+
+#define T_ZQCS_DEFAULT_NS				90
+#define T_ZQCL_DEFAULT_NS				360
+#define T_ZQINIT_DEFAULT_NS				1000
+
+/* DPD_EN */
+#define DPD_DISABLE					0
+#define DPD_ENABLE					1
+
+/*
+ * Default values for the low-power entry to be used if not provided by user.
+ * OMAP4/5 has a hw bug(i735) due to which this value can not be less than 512
+ * Timeout values are in DDR clock 'cycles' and frequency threshold in Hz
+ */
+#define EMIF_LP_MODE_TIMEOUT_PERFORMANCE		2048
+#define EMIF_LP_MODE_TIMEOUT_POWER			512
+#define EMIF_LP_MODE_FREQ_THRESHOLD			400000000
+
+/* DDR_PHY_CTRL_1 values for EMIF4D - ATTILA PHY combination */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY		0x049FF000
+#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY	0x41
+#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY	0x80
+#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY 0xFF
+
+/* DDR_PHY_CTRL_1 values for EMIF4D5 INTELLIPHY combination */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY		0x0E084200
+#define EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS	10000
+
+/* TEMP_ALERT_CONFIG - corresponding to temp gradient 5 C/s */
+#define TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS		360
+
+#define EMIF_T_CSTA					3
+#define EMIF_T_PDLL_UL					128
+
+/* External PHY control registers magic values */
+#define EMIF_EXT_PHY_CTRL_1_VAL				0x04020080
+#define EMIF_EXT_PHY_CTRL_5_VAL				0x04010040
+#define EMIF_EXT_PHY_CTRL_6_VAL				0x01004010
+#define EMIF_EXT_PHY_CTRL_7_VAL				0x00001004
+#define EMIF_EXT_PHY_CTRL_8_VAL				0x04010040
+#define EMIF_EXT_PHY_CTRL_9_VAL				0x01004010
+#define EMIF_EXT_PHY_CTRL_10_VAL			0x00001004
+#define EMIF_EXT_PHY_CTRL_11_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_12_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_13_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_14_VAL			0x80080080
+#define EMIF_EXT_PHY_CTRL_15_VAL			0x00800800
+#define EMIF_EXT_PHY_CTRL_16_VAL			0x08102040
+#define EMIF_EXT_PHY_CTRL_17_VAL			0x00000001
+#define EMIF_EXT_PHY_CTRL_18_VAL			0x540A8150
+#define EMIF_EXT_PHY_CTRL_19_VAL			0xA81502A0
+#define EMIF_EXT_PHY_CTRL_20_VAL			0x002A0540
+#define EMIF_EXT_PHY_CTRL_21_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_22_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_23_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_24_VAL			0x00000077
+
+#define EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS	1200
+
+/* Registers offset */
+#define EMIF_MODULE_ID_AND_REVISION			0x0000
+#define EMIF_STATUS					0x0004
+#define EMIF_SDRAM_CONFIG				0x0008
+#define EMIF_SDRAM_CONFIG_2				0x000c
+#define EMIF_SDRAM_REFRESH_CONTROL			0x0010
+#define EMIF_SDRAM_REFRESH_CTRL_SHDW			0x0014
+#define EMIF_SDRAM_TIMING_1				0x0018
+#define EMIF_SDRAM_TIMING_1_SHDW			0x001c
+#define EMIF_SDRAM_TIMING_2				0x0020
+#define EMIF_SDRAM_TIMING_2_SHDW			0x0024
+#define EMIF_SDRAM_TIMING_3				0x0028
+#define EMIF_SDRAM_TIMING_3_SHDW			0x002c
+#define EMIF_LPDDR2_NVM_TIMING				0x0030
+#define EMIF_LPDDR2_NVM_TIMING_SHDW			0x0034
+#define EMIF_POWER_MANAGEMENT_CONTROL			0x0038
+#define EMIF_POWER_MANAGEMENT_CTRL_SHDW			0x003c
+#define EMIF_LPDDR2_MODE_REG_DATA			0x0040
+#define EMIF_LPDDR2_MODE_REG_CONFIG			0x0050
+#define EMIF_OCP_CONFIG					0x0054
+#define EMIF_OCP_CONFIG_VALUE_1				0x0058
+#define EMIF_OCP_CONFIG_VALUE_2				0x005c
+#define EMIF_IODFT_TEST_LOGIC_GLOBAL_CONTROL		0x0060
+#define EMIF_IODFT_TEST_LOGIC_CTRL_MISR_RESULT		0x0064
+#define EMIF_IODFT_TEST_LOGIC_ADDRESS_MISR_RESULT	0x0068
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_1	0x006c
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_2	0x0070
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_3	0x0074
+#define EMIF_PERFORMANCE_COUNTER_1			0x0080
+#define EMIF_PERFORMANCE_COUNTER_2			0x0084
+#define EMIF_PERFORMANCE_COUNTER_CONFIG			0x0088
+#define EMIF_PERFORMANCE_COUNTER_MASTER_REGION_SELECT	0x008c
+#define EMIF_PERFORMANCE_COUNTER_TIME			0x0090
+#define EMIF_MISC_REG					0x0094
+#define EMIF_DLL_CALIB_CTRL				0x0098
+#define EMIF_DLL_CALIB_CTRL_SHDW			0x009c
+#define EMIF_END_OF_INTERRUPT				0x00a0
+#define EMIF_SYSTEM_OCP_INTERRUPT_RAW_STATUS		0x00a4
+#define EMIF_LL_OCP_INTERRUPT_RAW_STATUS		0x00a8
+#define EMIF_SYSTEM_OCP_INTERRUPT_STATUS		0x00ac
+#define EMIF_LL_OCP_INTERRUPT_STATUS			0x00b0
+#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET		0x00b4
+#define EMIF_LL_OCP_INTERRUPT_ENABLE_SET		0x00b8
+#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR		0x00bc
+#define EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR		0x00c0
+#define EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG	0x00c8
+#define EMIF_TEMPERATURE_ALERT_CONFIG			0x00cc
+#define EMIF_OCP_ERROR_LOG				0x00d0
+#define EMIF_READ_WRITE_LEVELING_RAMP_WINDOW		0x00d4
+#define EMIF_READ_WRITE_LEVELING_RAMP_CONTROL		0x00d8
+#define EMIF_READ_WRITE_LEVELING_CONTROL		0x00dc
+#define EMIF_DDR_PHY_CTRL_1				0x00e4
+#define EMIF_DDR_PHY_CTRL_1_SHDW			0x00e8
+#define EMIF_DDR_PHY_CTRL_2				0x00ec
+#define EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING	0x0100
+#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING 0x0104
+#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING 0x0108
+#define EMIF_READ_WRITE_EXECUTION_THRESHOLD		0x0120
+#define EMIF_COS_CONFIG					0x0124
+#define EMIF_PHY_STATUS_1				0x0140
+#define EMIF_PHY_STATUS_2				0x0144
+#define EMIF_PHY_STATUS_3				0x0148
+#define EMIF_PHY_STATUS_4				0x014c
+#define EMIF_PHY_STATUS_5				0x0150
+#define EMIF_PHY_STATUS_6				0x0154
+#define EMIF_PHY_STATUS_7				0x0158
+#define EMIF_PHY_STATUS_8				0x015c
+#define EMIF_PHY_STATUS_9				0x0160
+#define EMIF_PHY_STATUS_10				0x0164
+#define EMIF_PHY_STATUS_11				0x0168
+#define EMIF_PHY_STATUS_12				0x016c
+#define EMIF_PHY_STATUS_13				0x0170
+#define EMIF_PHY_STATUS_14				0x0174
+#define EMIF_PHY_STATUS_15				0x0178
+#define EMIF_PHY_STATUS_16				0x017c
+#define EMIF_PHY_STATUS_17				0x0180
+#define EMIF_PHY_STATUS_18				0x0184
+#define EMIF_PHY_STATUS_19				0x0188
+#define EMIF_PHY_STATUS_20				0x018c
+#define EMIF_PHY_STATUS_21				0x0190
+#define EMIF_EXT_PHY_CTRL_1				0x0200
+#define EMIF_EXT_PHY_CTRL_1_SHDW			0x0204
+#define EMIF_EXT_PHY_CTRL_2				0x0208
+#define EMIF_EXT_PHY_CTRL_2_SHDW			0x020c
+#define EMIF_EXT_PHY_CTRL_3				0x0210
+#define EMIF_EXT_PHY_CTRL_3_SHDW			0x0214
+#define EMIF_EXT_PHY_CTRL_4				0x0218
+#define EMIF_EXT_PHY_CTRL_4_SHDW			0x021c
+#define EMIF_EXT_PHY_CTRL_5				0x0220
+#define EMIF_EXT_PHY_CTRL_5_SHDW			0x0224
+#define EMIF_EXT_PHY_CTRL_6				0x0228
+#define EMIF_EXT_PHY_CTRL_6_SHDW			0x022c
+#define EMIF_EXT_PHY_CTRL_7				0x0230
+#define EMIF_EXT_PHY_CTRL_7_SHDW			0x0234
+#define EMIF_EXT_PHY_CTRL_8				0x0238
+#define EMIF_EXT_PHY_CTRL_8_SHDW			0x023c
+#define EMIF_EXT_PHY_CTRL_9				0x0240
+#define EMIF_EXT_PHY_CTRL_9_SHDW			0x0244
+#define EMIF_EXT_PHY_CTRL_10				0x0248
+#define EMIF_EXT_PHY_CTRL_10_SHDW			0x024c
+#define EMIF_EXT_PHY_CTRL_11				0x0250
+#define EMIF_EXT_PHY_CTRL_11_SHDW			0x0254
+#define EMIF_EXT_PHY_CTRL_12				0x0258
+#define EMIF_EXT_PHY_CTRL_12_SHDW			0x025c
+#define EMIF_EXT_PHY_CTRL_13				0x0260
+#define EMIF_EXT_PHY_CTRL_13_SHDW			0x0264
+#define EMIF_EXT_PHY_CTRL_14				0x0268
+#define EMIF_EXT_PHY_CTRL_14_SHDW			0x026c
+#define EMIF_EXT_PHY_CTRL_15				0x0270
+#define EMIF_EXT_PHY_CTRL_15_SHDW			0x0274
+#define EMIF_EXT_PHY_CTRL_16				0x0278
+#define EMIF_EXT_PHY_CTRL_16_SHDW			0x027c
+#define EMIF_EXT_PHY_CTRL_17				0x0280
+#define EMIF_EXT_PHY_CTRL_17_SHDW			0x0284
+#define EMIF_EXT_PHY_CTRL_18				0x0288
+#define EMIF_EXT_PHY_CTRL_18_SHDW			0x028c
+#define EMIF_EXT_PHY_CTRL_19				0x0290
+#define EMIF_EXT_PHY_CTRL_19_SHDW			0x0294
+#define EMIF_EXT_PHY_CTRL_20				0x0298
+#define EMIF_EXT_PHY_CTRL_20_SHDW			0x029c
+#define EMIF_EXT_PHY_CTRL_21				0x02a0
+#define EMIF_EXT_PHY_CTRL_21_SHDW			0x02a4
+#define EMIF_EXT_PHY_CTRL_22				0x02a8
+#define EMIF_EXT_PHY_CTRL_22_SHDW			0x02ac
+#define EMIF_EXT_PHY_CTRL_23				0x02b0
+#define EMIF_EXT_PHY_CTRL_23_SHDW			0x02b4
+#define EMIF_EXT_PHY_CTRL_24				0x02b8
+#define EMIF_EXT_PHY_CTRL_24_SHDW			0x02bc
+#define EMIF_EXT_PHY_CTRL_25				0x02c0
+#define EMIF_EXT_PHY_CTRL_25_SHDW			0x02c4
+#define EMIF_EXT_PHY_CTRL_26				0x02c8
+#define EMIF_EXT_PHY_CTRL_26_SHDW			0x02cc
+#define EMIF_EXT_PHY_CTRL_27				0x02d0
+#define EMIF_EXT_PHY_CTRL_27_SHDW			0x02d4
+#define EMIF_EXT_PHY_CTRL_28				0x02d8
+#define EMIF_EXT_PHY_CTRL_28_SHDW			0x02dc
+#define EMIF_EXT_PHY_CTRL_29				0x02e0
+#define EMIF_EXT_PHY_CTRL_29_SHDW			0x02e4
+#define EMIF_EXT_PHY_CTRL_30				0x02e8
+#define EMIF_EXT_PHY_CTRL_30_SHDW			0x02ec
+
+/* Registers shifts and masks */
+
+/* EMIF_MODULE_ID_AND_REVISION */
+#define SCHEME_SHIFT					30
+#define SCHEME_MASK					(0x3 << 30)
+#define MODULE_ID_SHIFT					16
+#define MODULE_ID_MASK					(0xfff << 16)
+#define RTL_VERSION_SHIFT				11
+#define RTL_VERSION_MASK				(0x1f << 11)
+#define MAJOR_REVISION_SHIFT				8
+#define MAJOR_REVISION_MASK				(0x7 << 8)
+#define MINOR_REVISION_SHIFT				0
+#define MINOR_REVISION_MASK				(0x3f << 0)
+
+/* STATUS */
+#define BE_SHIFT					31
+#define BE_MASK						(1 << 31)
+#define DUAL_CLK_MODE_SHIFT				30
+#define DUAL_CLK_MODE_MASK				(1 << 30)
+#define FAST_INIT_SHIFT					29
+#define FAST_INIT_MASK					(1 << 29)
+#define RDLVLGATETO_SHIFT				6
+#define RDLVLGATETO_MASK				(1 << 6)
+#define RDLVLTO_SHIFT					5
+#define RDLVLTO_MASK					(1 << 5)
+#define WRLVLTO_SHIFT					4
+#define WRLVLTO_MASK					(1 << 4)
+#define PHY_DLL_READY_SHIFT				2
+#define PHY_DLL_READY_MASK				(1 << 2)
+
+/* SDRAM_CONFIG */
+#define SDRAM_TYPE_SHIFT				29
+#define SDRAM_TYPE_MASK					(0x7 << 29)
+#define IBANK_POS_SHIFT					27
+#define IBANK_POS_MASK					(0x3 << 27)
+#define DDR_TERM_SHIFT					24
+#define DDR_TERM_MASK					(0x7 << 24)
+#define DDR2_DDQS_SHIFT					23
+#define DDR2_DDQS_MASK					(1 << 23)
+#define DYN_ODT_SHIFT					21
+#define DYN_ODT_MASK					(0x3 << 21)
+#define DDR_DISABLE_DLL_SHIFT				20
+#define DDR_DISABLE_DLL_MASK				(1 << 20)
+#define SDRAM_DRIVE_SHIFT				18
+#define SDRAM_DRIVE_MASK				(0x3 << 18)
+#define CWL_SHIFT					16
+#define CWL_MASK					(0x3 << 16)
+#define NARROW_MODE_SHIFT				14
+#define NARROW_MODE_MASK				(0x3 << 14)
+#define CL_SHIFT					10
+#define CL_MASK						(0xf << 10)
+#define ROWSIZE_SHIFT					7
+#define ROWSIZE_MASK					(0x7 << 7)
+#define IBANK_SHIFT					4
+#define IBANK_MASK					(0x7 << 4)
+#define EBANK_SHIFT					3
+#define EBANK_MASK					(1 << 3)
+#define PAGESIZE_SHIFT					0
+#define PAGESIZE_MASK					(0x7 << 0)
+
+/* SDRAM_CONFIG_2 */
+#define CS1NVMEN_SHIFT					30
+#define CS1NVMEN_MASK					(1 << 30)
+#define EBANK_POS_SHIFT					27
+#define EBANK_POS_MASK					(1 << 27)
+#define RDBNUM_SHIFT					4
+#define RDBNUM_MASK					(0x3 << 4)
+#define RDBSIZE_SHIFT					0
+#define RDBSIZE_MASK					(0x7 << 0)
+
+/* SDRAM_REFRESH_CONTROL */
+#define INITREF_DIS_SHIFT				31
+#define INITREF_DIS_MASK				(1 << 31)
+#define SRT_SHIFT					29
+#define SRT_MASK					(1 << 29)
+#define ASR_SHIFT					28
+#define ASR_MASK					(1 << 28)
+#define PASR_SHIFT					24
+#define PASR_MASK					(0x7 << 24)
+#define REFRESH_RATE_SHIFT				0
+#define REFRESH_RATE_MASK				(0xffff << 0)
+
+/* SDRAM_TIMING_1 */
+#define T_RTW_SHIFT					29
+#define T_RTW_MASK					(0x7 << 29)
+#define T_RP_SHIFT					25
+#define T_RP_MASK					(0xf << 25)
+#define T_RCD_SHIFT					21
+#define T_RCD_MASK					(0xf << 21)
+#define T_WR_SHIFT					17
+#define T_WR_MASK					(0xf << 17)
+#define T_RAS_SHIFT					12
+#define T_RAS_MASK					(0x1f << 12)
+#define T_RC_SHIFT					6
+#define T_RC_MASK					(0x3f << 6)
+#define T_RRD_SHIFT					3
+#define T_RRD_MASK					(0x7 << 3)
+#define T_WTR_SHIFT					0
+#define T_WTR_MASK					(0x7 << 0)
+
+/* SDRAM_TIMING_2 */
+#define T_XP_SHIFT					28
+#define T_XP_MASK					(0x7 << 28)
+#define T_ODT_SHIFT					25
+#define T_ODT_MASK					(0x7 << 25)
+#define T_XSNR_SHIFT					16
+#define T_XSNR_MASK					(0x1ff << 16)
+#define T_XSRD_SHIFT					6
+#define T_XSRD_MASK					(0x3ff << 6)
+#define T_RTP_SHIFT					3
+#define T_RTP_MASK					(0x7 << 3)
+#define T_CKE_SHIFT					0
+#define T_CKE_MASK					(0x7 << 0)
+
+/* SDRAM_TIMING_3 */
+#define T_PDLL_UL_SHIFT					28
+#define T_PDLL_UL_MASK					(0xf << 28)
+#define T_CSTA_SHIFT					24
+#define T_CSTA_MASK					(0xf << 24)
+#define T_CKESR_SHIFT					21
+#define T_CKESR_MASK					(0x7 << 21)
+#define ZQ_ZQCS_SHIFT					15
+#define ZQ_ZQCS_MASK					(0x3f << 15)
+#define T_TDQSCKMAX_SHIFT				13
+#define T_TDQSCKMAX_MASK				(0x3 << 13)
+#define T_RFC_SHIFT					4
+#define T_RFC_MASK					(0x1ff << 4)
+#define T_RAS_MAX_SHIFT					0
+#define T_RAS_MAX_MASK					(0xf << 0)
+
+/* POWER_MANAGEMENT_CONTROL */
+#define PD_TIM_SHIFT					12
+#define PD_TIM_MASK					(0xf << 12)
+#define DPD_EN_SHIFT					11
+#define DPD_EN_MASK					(1 << 11)
+#define LP_MODE_SHIFT					8
+#define LP_MODE_MASK					(0x7 << 8)
+#define SR_TIM_SHIFT					4
+#define SR_TIM_MASK					(0xf << 4)
+#define CS_TIM_SHIFT					0
+#define CS_TIM_MASK					(0xf << 0)
+
+/* LPDDR2_MODE_REG_DATA */
+#define VALUE_0_SHIFT					0
+#define VALUE_0_MASK					(0x7f << 0)
+
+/* LPDDR2_MODE_REG_CONFIG */
+#define CS_SHIFT					31
+#define CS_MASK						(1 << 31)
+#define REFRESH_EN_SHIFT				30
+#define REFRESH_EN_MASK					(1 << 30)
+#define ADDRESS_SHIFT					0
+#define ADDRESS_MASK					(0xff << 0)
+
+/* OCP_CONFIG */
+#define SYS_THRESH_MAX_SHIFT				24
+#define SYS_THRESH_MAX_MASK				(0xf << 24)
+#define MPU_THRESH_MAX_SHIFT				20
+#define MPU_THRESH_MAX_MASK				(0xf << 20)
+#define LL_THRESH_MAX_SHIFT				16
+#define LL_THRESH_MAX_MASK				(0xf << 16)
+
+/* PERFORMANCE_COUNTER_1 */
+#define COUNTER1_SHIFT					0
+#define COUNTER1_MASK					(0xffffffff << 0)
+
+/* PERFORMANCE_COUNTER_2 */
+#define COUNTER2_SHIFT					0
+#define COUNTER2_MASK					(0xffffffff << 0)
+
+/* PERFORMANCE_COUNTER_CONFIG */
+#define CNTR2_MCONNID_EN_SHIFT				31
+#define CNTR2_MCONNID_EN_MASK				(1 << 31)
+#define CNTR2_REGION_EN_SHIFT				30
+#define CNTR2_REGION_EN_MASK				(1 << 30)
+#define CNTR2_CFG_SHIFT					16
+#define CNTR2_CFG_MASK					(0xf << 16)
+#define CNTR1_MCONNID_EN_SHIFT				15
+#define CNTR1_MCONNID_EN_MASK				(1 << 15)
+#define CNTR1_REGION_EN_SHIFT				14
+#define CNTR1_REGION_EN_MASK				(1 << 14)
+#define CNTR1_CFG_SHIFT					0
+#define CNTR1_CFG_MASK					(0xf << 0)
+
+/* PERFORMANCE_COUNTER_MASTER_REGION_SELECT */
+#define MCONNID2_SHIFT					24
+#define MCONNID2_MASK					(0xff << 24)
+#define REGION_SEL2_SHIFT				16
+#define REGION_SEL2_MASK				(0x3 << 16)
+#define MCONNID1_SHIFT					8
+#define MCONNID1_MASK					(0xff << 8)
+#define REGION_SEL1_SHIFT				0
+#define REGION_SEL1_MASK				(0x3 << 0)
+
+/* PERFORMANCE_COUNTER_TIME */
+#define TOTAL_TIME_SHIFT				0
+#define TOTAL_TIME_MASK					(0xffffffff << 0)
+
+/* DLL_CALIB_CTRL */
+#define ACK_WAIT_SHIFT					16
+#define ACK_WAIT_MASK					(0xf << 16)
+#define DLL_CALIB_INTERVAL_SHIFT			0
+#define DLL_CALIB_INTERVAL_MASK				(0x1ff << 0)
+
+/* END_OF_INTERRUPT */
+#define EOI_SHIFT					0
+#define EOI_MASK					(1 << 0)
+
+/* SYSTEM_OCP_INTERRUPT_RAW_STATUS */
+#define DNV_SYS_SHIFT					2
+#define DNV_SYS_MASK					(1 << 2)
+#define TA_SYS_SHIFT					1
+#define TA_SYS_MASK					(1 << 1)
+#define ERR_SYS_SHIFT					0
+#define ERR_SYS_MASK					(1 << 0)
+
+/* LOW_LATENCY_OCP_INTERRUPT_RAW_STATUS */
+#define DNV_LL_SHIFT					2
+#define DNV_LL_MASK					(1 << 2)
+#define TA_LL_SHIFT					1
+#define TA_LL_MASK					(1 << 1)
+#define ERR_LL_SHIFT					0
+#define ERR_LL_MASK					(1 << 0)
+
+/* SYSTEM_OCP_INTERRUPT_ENABLE_SET */
+#define EN_DNV_SYS_SHIFT				2
+#define EN_DNV_SYS_MASK					(1 << 2)
+#define EN_TA_SYS_SHIFT					1
+#define EN_TA_SYS_MASK					(1 << 1)
+#define EN_ERR_SYS_SHIFT					0
+#define EN_ERR_SYS_MASK					(1 << 0)
+
+/* LOW_LATENCY_OCP_INTERRUPT_ENABLE_SET */
+#define EN_DNV_LL_SHIFT					2
+#define EN_DNV_LL_MASK					(1 << 2)
+#define EN_TA_LL_SHIFT					1
+#define EN_TA_LL_MASK					(1 << 1)
+#define EN_ERR_LL_SHIFT					0
+#define EN_ERR_LL_MASK					(1 << 0)
+
+/* SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG */
+#define ZQ_CS1EN_SHIFT					31
+#define ZQ_CS1EN_MASK					(1 << 31)
+#define ZQ_CS0EN_SHIFT					30
+#define ZQ_CS0EN_MASK					(1 << 30)
+#define ZQ_DUALCALEN_SHIFT				29
+#define ZQ_DUALCALEN_MASK				(1 << 29)
+#define ZQ_SFEXITEN_SHIFT				28
+#define ZQ_SFEXITEN_MASK				(1 << 28)
+#define ZQ_ZQINIT_MULT_SHIFT				18
+#define ZQ_ZQINIT_MULT_MASK				(0x3 << 18)
+#define ZQ_ZQCL_MULT_SHIFT				16
+#define ZQ_ZQCL_MULT_MASK				(0x3 << 16)
+#define ZQ_REFINTERVAL_SHIFT				0
+#define ZQ_REFINTERVAL_MASK				(0xffff << 0)
+
+/* TEMPERATURE_ALERT_CONFIG */
+#define TA_CS1EN_SHIFT					31
+#define TA_CS1EN_MASK					(1 << 31)
+#define TA_CS0EN_SHIFT					30
+#define TA_CS0EN_MASK					(1 << 30)
+#define TA_SFEXITEN_SHIFT				28
+#define TA_SFEXITEN_MASK				(1 << 28)
+#define TA_DEVWDT_SHIFT					26
+#define TA_DEVWDT_MASK					(0x3 << 26)
+#define TA_DEVCNT_SHIFT					24
+#define TA_DEVCNT_MASK					(0x3 << 24)
+#define TA_REFINTERVAL_SHIFT				0
+#define TA_REFINTERVAL_MASK				(0x3fffff << 0)
+
+/* OCP_ERROR_LOG */
+#define MADDRSPACE_SHIFT				14
+#define MADDRSPACE_MASK					(0x3 << 14)
+#define MBURSTSEQ_SHIFT					11
+#define MBURSTSEQ_MASK					(0x7 << 11)
+#define MCMD_SHIFT					8
+#define MCMD_MASK					(0x7 << 8)
+#define MCONNID_SHIFT					0
+#define MCONNID_MASK					(0xff << 0)
+
+/* DDR_PHY_CTRL_1 - EMIF4D */
+#define DLL_SLAVE_DLY_CTRL_SHIFT_4D			4
+#define DLL_SLAVE_DLY_CTRL_MASK_4D			(0xFF << 4)
+#define READ_LATENCY_SHIFT_4D				0
+#define READ_LATENCY_MASK_4D				(0xf << 0)
+
+/* DDR_PHY_CTRL_1 - EMIF4D5 */
+#define DLL_HALF_DELAY_SHIFT_4D5			21
+#define DLL_HALF_DELAY_MASK_4D5				(1 << 21)
+#define READ_LATENCY_SHIFT_4D5				0
+#define READ_LATENCY_MASK_4D5				(0x1f << 0)
+
+/* DDR_PHY_CTRL_1_SHDW */
+#define DDR_PHY_CTRL_1_SHDW_SHIFT			5
+#define DDR_PHY_CTRL_1_SHDW_MASK			(0x7ffffff << 5)
+#define READ_LATENCY_SHDW_SHIFT				0
+#define READ_LATENCY_SHDW_MASK				(0x1f << 0)
+
+#ifndef __ASSEMBLY__
+/*
+ * Structure containing shadow of important registers in EMIF
+ * The calculation function fills in this structure to be later used for
+ * initialisation and DVFS
+ */
+struct emif_regs {
+	u32 freq;
+	u32 ref_ctrl_shdw;
+	u32 ref_ctrl_shdw_derated;
+	u32 sdram_tim1_shdw;
+	u32 sdram_tim1_shdw_derated;
+	u32 sdram_tim2_shdw;
+	u32 sdram_tim3_shdw;
+	u32 sdram_tim3_shdw_derated;
+	u32 pwr_mgmt_ctrl_shdw;
+	union {
+		u32 read_idle_ctrl_shdw_normal;
+		u32 dll_calib_ctrl_shdw_normal;
+	};
+	union {
+		u32 read_idle_ctrl_shdw_volt_ramp;
+		u32 dll_calib_ctrl_shdw_volt_ramp;
+	};
+
+	u32 phy_ctrl_1_shdw;
+	u32 ext_phy_ctrl_2_shdw;
+	u32 ext_phy_ctrl_3_shdw;
+	u32 ext_phy_ctrl_4_shdw;
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __EMIF_H */
diff --git a/drivers/memory/tegra20-mc.c b/drivers/memory/tegra20-mc.c
new file mode 100644
index 000000000000..3ed49c1c2b91
--- /dev/null
+++ b/drivers/memory/tegra20-mc.c
@@ -0,0 +1,257 @@
+/*
+ * Tegra20 Memory Controller
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ratelimit.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define DRV_NAME "tegra20-mc"
+
+#define MC_INTSTATUS			0x0
+#define MC_INTMASK			0x4
+
+#define MC_INT_ERR_SHIFT		6
+#define MC_INT_ERR_MASK			(0x1f << MC_INT_ERR_SHIFT)
+#define MC_INT_DECERR_EMEM		BIT(MC_INT_ERR_SHIFT)
+#define MC_INT_INVALID_GART_PAGE	BIT(MC_INT_ERR_SHIFT + 1)
+#define MC_INT_SECURITY_VIOLATION	BIT(MC_INT_ERR_SHIFT + 2)
+#define MC_INT_ARBITRATION_EMEM		BIT(MC_INT_ERR_SHIFT + 3)
+
+#define MC_GART_ERROR_REQ		0x30
+#define MC_DECERR_EMEM_OTHERS_STATUS	0x58
+#define MC_SECURITY_VIOLATION_STATUS	0x74
+
+#define SECURITY_VIOLATION_TYPE		BIT(30)	/* 0=TRUSTZONE, 1=CARVEOUT */
+
+#define MC_CLIENT_ID_MASK		0x3f
+
+#define NUM_MC_REG_BANKS		2
+
+struct tegra20_mc {
+	void __iomem *regs[NUM_MC_REG_BANKS];
+	struct device *dev;
+};
+
+static inline u32 mc_readl(struct tegra20_mc *mc, u32 offs)
+{
+	u32 val = 0;
+
+	if (offs < 0x24)
+		val = readl(mc->regs[0] + offs);
+	if (offs < 0x400)
+		val = readl(mc->regs[1] + offs - 0x3c);
+
+	return val;
+}
+
+static inline void mc_writel(struct tegra20_mc *mc, u32 val, u32 offs)
+{
+	if (offs < 0x24) {
+		writel(val, mc->regs[0] + offs);
+		return;
+	}
+	if (offs < 0x400) {
+		writel(val, mc->regs[1] + offs - 0x3c);
+		return;
+	}
+}
+
+static const char * const tegra20_mc_client[] = {
+	"cbr_display0a",
+	"cbr_display0ab",
+	"cbr_display0b",
+	"cbr_display0bb",
+	"cbr_display0c",
+	"cbr_display0cb",
+	"cbr_display1b",
+	"cbr_display1bb",
+	"cbr_eppup",
+	"cbr_g2pr",
+	"cbr_g2sr",
+	"cbr_mpeunifbr",
+	"cbr_viruv",
+	"csr_avpcarm7r",
+	"csr_displayhc",
+	"csr_displayhcb",
+	"csr_fdcdrd",
+	"csr_g2dr",
+	"csr_host1xdmar",
+	"csr_host1xr",
+	"csr_idxsrd",
+	"csr_mpcorer",
+	"csr_mpe_ipred",
+	"csr_mpeamemrd",
+	"csr_mpecsrd",
+	"csr_ppcsahbdmar",
+	"csr_ppcsahbslvr",
+	"csr_texsrd",
+	"csr_vdebsevr",
+	"csr_vdember",
+	"csr_vdemcer",
+	"csr_vdetper",
+	"cbw_eppu",
+	"cbw_eppv",
+	"cbw_eppy",
+	"cbw_mpeunifbw",
+	"cbw_viwsb",
+	"cbw_viwu",
+	"cbw_viwv",
+	"cbw_viwy",
+	"ccw_g2dw",
+	"csw_avpcarm7w",
+	"csw_fdcdwr",
+	"csw_host1xw",
+	"csw_ispw",
+	"csw_mpcorew",
+	"csw_mpecswr",
+	"csw_ppcsahbdmaw",
+	"csw_ppcsahbslvw",
+	"csw_vdebsevw",
+	"csw_vdembew",
+	"csw_vdetpmw",
+};
+
+static void tegra20_mc_decode(struct tegra20_mc *mc, int n)
+{
+	u32 addr, req;
+	const char *client = "Unknown";
+	int idx, cid;
+	const struct reg_info {
+		u32 offset;
+		u32 write_bit;	/* 0=READ, 1=WRITE */
+		int cid_shift;
+		char *message;
+	} reg[] = {
+		{
+			.offset = MC_DECERR_EMEM_OTHERS_STATUS,
+			.write_bit = 31,
+			.message = "MC_DECERR",
+		},
+		{
+			.offset	= MC_GART_ERROR_REQ,
+			.cid_shift = 1,
+			.message = "MC_GART_ERR",
+
+		},
+		{
+			.offset = MC_SECURITY_VIOLATION_STATUS,
+			.write_bit = 31,
+			.message = "MC_SECURITY_ERR",
+		},
+	};
+
+	idx = n - MC_INT_ERR_SHIFT;
+	if ((idx < 0) || (idx >= ARRAY_SIZE(reg))) {
+		dev_err_ratelimited(mc->dev, "Unknown interrupt status %08lx\n",
+				    BIT(n));
+		return;
+	}
+
+	req = mc_readl(mc, reg[idx].offset);
+	cid = (req >> reg[idx].cid_shift) & MC_CLIENT_ID_MASK;
+	if (cid < ARRAY_SIZE(tegra20_mc_client))
+		client = tegra20_mc_client[cid];
+
+	addr = mc_readl(mc, reg[idx].offset + sizeof(u32));
+
+	dev_err_ratelimited(mc->dev, "%s (0x%08x): 0x%08x %s (%s %s)\n",
+			   reg[idx].message, req, addr, client,
+			   (req & BIT(reg[idx].write_bit)) ? "write" : "read",
+			   (reg[idx].offset == MC_SECURITY_VIOLATION_STATUS) ?
+			   ((req & SECURITY_VIOLATION_TYPE) ?
+			    "carveout" : "trustzone") : "");
+}
+
+static const struct of_device_id tegra20_mc_of_match[] __devinitconst = {
+	{ .compatible = "nvidia,tegra20-mc", },
+	{},
+};
+
+static irqreturn_t tegra20_mc_isr(int irq, void *data)
+{
+	u32 stat, mask, bit;
+	struct tegra20_mc *mc = data;
+
+	stat = mc_readl(mc, MC_INTSTATUS);
+	mask = mc_readl(mc, MC_INTMASK);
+	mask &= stat;
+	if (!mask)
+		return IRQ_NONE;
+	while ((bit = ffs(mask)) != 0)
+		tegra20_mc_decode(mc, bit - 1);
+	mc_writel(mc, stat, MC_INTSTATUS);
+	return IRQ_HANDLED;
+}
+
+static int __devinit tegra20_mc_probe(struct platform_device *pdev)
+{
+	struct resource *irq;
+	struct tegra20_mc *mc;
+	int i, err;
+	u32 intmask;
+
+	mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL);
+	if (!mc)
+		return -ENOMEM;
+	mc->dev = &pdev->dev;
+
+	for (i = 0; i < ARRAY_SIZE(mc->regs); i++) {
+		struct resource *res;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			return -ENODEV;
+		mc->regs[i] = devm_request_and_ioremap(&pdev->dev, res);
+		if (!mc->regs[i])
+			return -EBUSY;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq)
+		return -ENODEV;
+	err = devm_request_irq(&pdev->dev, irq->start, tegra20_mc_isr,
+			       IRQF_SHARED, dev_name(&pdev->dev), mc);
+	if (err)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, mc);
+
+	intmask = MC_INT_INVALID_GART_PAGE |
+		MC_INT_DECERR_EMEM | MC_INT_SECURITY_VIOLATION;
+	mc_writel(mc, intmask, MC_INTMASK);
+	return 0;
+}
+
+static struct platform_driver tegra20_mc_driver = {
+	.probe = tegra20_mc_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = tegra20_mc_of_match,
+	},
+};
+module_platform_driver(tegra20_mc_driver);
+
+MODULE_AUTHOR("Hiroshi DOYU <hdoyu@nvidia.com>");
+MODULE_DESCRIPTION("Tegra20 MC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/memory/tegra30-mc.c b/drivers/memory/tegra30-mc.c
new file mode 100644
index 000000000000..e56ff04eb5cc
--- /dev/null
+++ b/drivers/memory/tegra30-mc.c
@@ -0,0 +1,382 @@
+/*
+ * Tegra30 Memory Controller
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ratelimit.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define DRV_NAME "tegra30-mc"
+
+#define MC_INTSTATUS			0x0
+#define MC_INTMASK			0x4
+
+#define MC_INT_ERR_SHIFT		6
+#define MC_INT_ERR_MASK			(0x1f << MC_INT_ERR_SHIFT)
+#define MC_INT_DECERR_EMEM		BIT(MC_INT_ERR_SHIFT)
+#define MC_INT_SECURITY_VIOLATION	BIT(MC_INT_ERR_SHIFT + 2)
+#define MC_INT_ARBITRATION_EMEM		BIT(MC_INT_ERR_SHIFT + 3)
+#define MC_INT_INVALID_SMMU_PAGE	BIT(MC_INT_ERR_SHIFT + 4)
+
+#define MC_ERR_STATUS			0x8
+#define MC_ERR_ADR			0xc
+
+#define MC_ERR_TYPE_SHIFT		28
+#define MC_ERR_TYPE_MASK		(7 << MC_ERR_TYPE_SHIFT)
+#define MC_ERR_TYPE_DECERR_EMEM		2
+#define MC_ERR_TYPE_SECURITY_TRUSTZONE	3
+#define MC_ERR_TYPE_SECURITY_CARVEOUT	4
+#define MC_ERR_TYPE_INVALID_SMMU_PAGE	6
+
+#define MC_ERR_INVALID_SMMU_PAGE_SHIFT	25
+#define MC_ERR_INVALID_SMMU_PAGE_MASK	(7 << MC_ERR_INVALID_SMMU_PAGE_SHIFT)
+#define MC_ERR_RW_SHIFT			16
+#define MC_ERR_RW			BIT(MC_ERR_RW_SHIFT)
+#define MC_ERR_SECURITY			BIT(MC_ERR_RW_SHIFT + 1)
+
+#define SECURITY_VIOLATION_TYPE		BIT(30)	/* 0=TRUSTZONE, 1=CARVEOUT */
+
+#define MC_EMEM_ARB_CFG			0x90
+#define MC_EMEM_ARB_OUTSTANDING_REQ	0x94
+#define MC_EMEM_ARB_TIMING_RCD		0x98
+#define MC_EMEM_ARB_TIMING_RP		0x9c
+#define MC_EMEM_ARB_TIMING_RC		0xa0
+#define MC_EMEM_ARB_TIMING_RAS		0xa4
+#define MC_EMEM_ARB_TIMING_FAW		0xa8
+#define MC_EMEM_ARB_TIMING_RRD		0xac
+#define MC_EMEM_ARB_TIMING_RAP2PRE	0xb0
+#define MC_EMEM_ARB_TIMING_WAP2PRE	0xb4
+#define MC_EMEM_ARB_TIMING_R2R		0xb8
+#define MC_EMEM_ARB_TIMING_W2W		0xbc
+#define MC_EMEM_ARB_TIMING_R2W		0xc0
+#define MC_EMEM_ARB_TIMING_W2R		0xc4
+
+#define MC_EMEM_ARB_DA_TURNS		0xd0
+#define MC_EMEM_ARB_DA_COVERS		0xd4
+#define MC_EMEM_ARB_MISC0		0xd8
+#define MC_EMEM_ARB_MISC1		0xdc
+
+#define MC_EMEM_ARB_RING3_THROTTLE	0xe4
+#define MC_EMEM_ARB_OVERRIDE		0xe8
+
+#define MC_TIMING_CONTROL		0xfc
+
+#define MC_CLIENT_ID_MASK		0x7f
+
+#define NUM_MC_REG_BANKS		4
+
+struct tegra30_mc {
+	void __iomem *regs[NUM_MC_REG_BANKS];
+	struct device *dev;
+	u32 ctx[0];
+};
+
+static inline u32 mc_readl(struct tegra30_mc *mc, u32 offs)
+{
+	u32 val = 0;
+
+	if (offs < 0x10)
+		val = readl(mc->regs[0] + offs);
+	if (offs < 0x1f0)
+		val = readl(mc->regs[1] + offs - 0x3c);
+	if (offs < 0x228)
+		val = readl(mc->regs[2] + offs - 0x200);
+	if (offs < 0x400)
+		val = readl(mc->regs[3] + offs - 0x284);
+
+	return val;
+}
+
+static inline void mc_writel(struct tegra30_mc *mc, u32 val, u32 offs)
+{
+	if (offs < 0x10) {
+		writel(val, mc->regs[0] + offs);
+		return;
+	}
+	if (offs < 0x1f0) {
+		writel(val, mc->regs[1] + offs - 0x3c);
+		return;
+	}
+	if (offs < 0x228) {
+		writel(val, mc->regs[2] + offs - 0x200);
+		return;
+	}
+	if (offs < 0x400) {
+		writel(val, mc->regs[3] + offs - 0x284);
+		return;
+	}
+}
+
+static const char * const tegra30_mc_client[] = {
+	"csr_ptcr",
+	"cbr_display0a",
+	"cbr_display0ab",
+	"cbr_display0b",
+	"cbr_display0bb",
+	"cbr_display0c",
+	"cbr_display0cb",
+	"cbr_display1b",
+	"cbr_display1bb",
+	"cbr_eppup",
+	"cbr_g2pr",
+	"cbr_g2sr",
+	"cbr_mpeunifbr",
+	"cbr_viruv",
+	"csr_afir",
+	"csr_avpcarm7r",
+	"csr_displayhc",
+	"csr_displayhcb",
+	"csr_fdcdrd",
+	"csr_fdcdrd2",
+	"csr_g2dr",
+	"csr_hdar",
+	"csr_host1xdmar",
+	"csr_host1xr",
+	"csr_idxsrd",
+	"csr_idxsrd2",
+	"csr_mpe_ipred",
+	"csr_mpeamemrd",
+	"csr_mpecsrd",
+	"csr_ppcsahbdmar",
+	"csr_ppcsahbslvr",
+	"csr_satar",
+	"csr_texsrd",
+	"csr_texsrd2",
+	"csr_vdebsevr",
+	"csr_vdember",
+	"csr_vdemcer",
+	"csr_vdetper",
+	"csr_mpcorelpr",
+	"csr_mpcorer",
+	"cbw_eppu",
+	"cbw_eppv",
+	"cbw_eppy",
+	"cbw_mpeunifbw",
+	"cbw_viwsb",
+	"cbw_viwu",
+	"cbw_viwv",
+	"cbw_viwy",
+	"ccw_g2dw",
+	"csw_afiw",
+	"csw_avpcarm7w",
+	"csw_fdcdwr",
+	"csw_fdcdwr2",
+	"csw_hdaw",
+	"csw_host1xw",
+	"csw_ispw",
+	"csw_mpcorelpw",
+	"csw_mpcorew",
+	"csw_mpecswr",
+	"csw_ppcsahbdmaw",
+	"csw_ppcsahbslvw",
+	"csw_sataw",
+	"csw_vdebsevw",
+	"csw_vdedbgw",
+	"csw_vdembew",
+	"csw_vdetpmw",
+};
+
+static void tegra30_mc_decode(struct tegra30_mc *mc, int n)
+{
+	u32 err, addr;
+	const char * const mc_int_err[] = {
+		"MC_DECERR",
+		"Unknown",
+		"MC_SECURITY_ERR",
+		"MC_ARBITRATION_EMEM",
+		"MC_SMMU_ERR",
+	};
+	const char * const err_type[] = {
+		"Unknown",
+		"Unknown",
+		"DECERR_EMEM",
+		"SECURITY_TRUSTZONE",
+		"SECURITY_CARVEOUT",
+		"Unknown",
+		"INVALID_SMMU_PAGE",
+		"Unknown",
+	};
+	char attr[6];
+	int cid, perm, type, idx;
+	const char *client = "Unknown";
+
+	idx = n - MC_INT_ERR_SHIFT;
+	if ((idx < 0) || (idx >= ARRAY_SIZE(mc_int_err)) || (idx == 1)) {
+		dev_err_ratelimited(mc->dev, "Unknown interrupt status %08lx\n",
+				    BIT(n));
+		return;
+	}
+
+	err = readl(mc + MC_ERR_STATUS);
+
+	type = (err & MC_ERR_TYPE_MASK) >> MC_ERR_TYPE_SHIFT;
+	perm = (err & MC_ERR_INVALID_SMMU_PAGE_MASK) >>
+		MC_ERR_INVALID_SMMU_PAGE_SHIFT;
+	if (type == MC_ERR_TYPE_INVALID_SMMU_PAGE)
+		sprintf(attr, "%c-%c-%c",
+			(perm & BIT(2)) ? 'R' : '-',
+			(perm & BIT(1)) ? 'W' : '-',
+			(perm & BIT(0)) ? 'S' : '-');
+	else
+		attr[0] = '\0';
+
+	cid = err & MC_CLIENT_ID_MASK;
+	if (cid < ARRAY_SIZE(tegra30_mc_client))
+		client = tegra30_mc_client[cid];
+
+	addr = readl(mc + MC_ERR_ADR);
+
+	dev_err_ratelimited(mc->dev, "%s (0x%08x): 0x%08x %s (%s %s %s %s)\n",
+			   mc_int_err[idx], err, addr, client,
+			   (err & MC_ERR_SECURITY) ? "secure" : "non-secure",
+			   (err & MC_ERR_RW) ? "write" : "read",
+			   err_type[type], attr);
+}
+
+static const u32 tegra30_mc_ctx[] = {
+	MC_EMEM_ARB_CFG,
+	MC_EMEM_ARB_OUTSTANDING_REQ,
+	MC_EMEM_ARB_TIMING_RCD,
+	MC_EMEM_ARB_TIMING_RP,
+	MC_EMEM_ARB_TIMING_RC,
+	MC_EMEM_ARB_TIMING_RAS,
+	MC_EMEM_ARB_TIMING_FAW,
+	MC_EMEM_ARB_TIMING_RRD,
+	MC_EMEM_ARB_TIMING_RAP2PRE,
+	MC_EMEM_ARB_TIMING_WAP2PRE,
+	MC_EMEM_ARB_TIMING_R2R,
+	MC_EMEM_ARB_TIMING_W2W,
+	MC_EMEM_ARB_TIMING_R2W,
+	MC_EMEM_ARB_TIMING_W2R,
+	MC_EMEM_ARB_DA_TURNS,
+	MC_EMEM_ARB_DA_COVERS,
+	MC_EMEM_ARB_MISC0,
+	MC_EMEM_ARB_MISC1,
+	MC_EMEM_ARB_RING3_THROTTLE,
+	MC_EMEM_ARB_OVERRIDE,
+	MC_INTMASK,
+};
+
+static int tegra30_mc_suspend(struct device *dev)
+{
+	int i;
+	struct tegra30_mc *mc = dev_get_drvdata(dev);
+
+	for (i = 0; i < ARRAY_SIZE(tegra30_mc_ctx); i++)
+		mc->ctx[i] = mc_readl(mc, tegra30_mc_ctx[i]);
+	return 0;
+}
+
+static int tegra30_mc_resume(struct device *dev)
+{
+	int i;
+	struct tegra30_mc *mc = dev_get_drvdata(dev);
+
+	for (i = 0; i < ARRAY_SIZE(tegra30_mc_ctx); i++)
+		mc_writel(mc, mc->ctx[i], tegra30_mc_ctx[i]);
+
+	mc_writel(mc, 1, MC_TIMING_CONTROL);
+	/* Read-back to ensure that write reached */
+	mc_readl(mc, MC_TIMING_CONTROL);
+	return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(tegra30_mc_pm,
+			    tegra30_mc_suspend,
+			    tegra30_mc_resume, NULL);
+
+static const struct of_device_id tegra30_mc_of_match[] __devinitconst = {
+	{ .compatible = "nvidia,tegra30-mc", },
+	{},
+};
+
+static irqreturn_t tegra30_mc_isr(int irq, void *data)
+{
+	u32 stat, mask, bit;
+	struct tegra30_mc *mc = data;
+
+	stat = mc_readl(mc, MC_INTSTATUS);
+	mask = mc_readl(mc, MC_INTMASK);
+	mask &= stat;
+	if (!mask)
+		return IRQ_NONE;
+	while ((bit = ffs(mask)) != 0)
+		tegra30_mc_decode(mc, bit - 1);
+	mc_writel(mc, stat, MC_INTSTATUS);
+	return IRQ_HANDLED;
+}
+
+static int __devinit tegra30_mc_probe(struct platform_device *pdev)
+{
+	struct resource *irq;
+	struct tegra30_mc *mc;
+	size_t bytes;
+	int err, i;
+	u32 intmask;
+
+	bytes = sizeof(*mc) + sizeof(u32) * ARRAY_SIZE(tegra30_mc_ctx);
+	mc = devm_kzalloc(&pdev->dev, bytes, GFP_KERNEL);
+	if (!mc)
+		return -ENOMEM;
+	mc->dev = &pdev->dev;
+
+	for (i = 0; i < ARRAY_SIZE(mc->regs); i++) {
+		struct resource *res;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			return -ENODEV;
+		mc->regs[i] = devm_request_and_ioremap(&pdev->dev, res);
+		if (!mc->regs[i])
+			return -EBUSY;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq)
+		return -ENODEV;
+	err = devm_request_irq(&pdev->dev, irq->start, tegra30_mc_isr,
+			       IRQF_SHARED, dev_name(&pdev->dev), mc);
+	if (err)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, mc);
+
+	intmask = MC_INT_INVALID_SMMU_PAGE |
+		MC_INT_DECERR_EMEM | MC_INT_SECURITY_VIOLATION;
+	mc_writel(mc, intmask, MC_INTMASK);
+	return 0;
+}
+
+static struct platform_driver tegra30_mc_driver = {
+	.probe = tegra30_mc_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = tegra30_mc_of_match,
+		.pm = &tegra30_mc_pm,
+	},
+};
+module_platform_driver(tegra30_mc_driver);
+
+MODULE_AUTHOR("Hiroshi DOYU <hdoyu@nvidia.com>");
+MODULE_DESCRIPTION("Tegra30 MC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 49ef8b0794ae..220686159c15 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -417,7 +417,7 @@ config MFD_MAX8925
 	select MFD_CORE
 	help
 	  Say yes here to support for Maxim Semiconductor MAX8925. This is
-	  a Power Management IC. This driver provies common support for
+	  a Power Management IC. This driver provides common support for
 	  accessing the device, additional drivers must be enabled in order
 	  to use the functionality of the device.
 
@@ -440,7 +440,7 @@ config MFD_MAX8998
 	help
 	  Say yes here to support for Maxim Semiconductor MAX8998 and
 	  National Semiconductor LP3974. This is a Power Management IC.
-	  This driver provies common support for accessing the device,
+	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
@@ -451,7 +451,7 @@ config MFD_S5M_CORE
 	select REGMAP_I2C
 	help
 	 Support for the Samsung Electronics S5M MFD series.
-	 This driver provies common support for accessing the device,
+	 This driver provides common support for accessing the device,
 	 additional drivers must be enabled in order to use the functionality
 	 of the device
 
diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c
index e7ff783aa31e..5a62e6bf89ae 100644
--- a/drivers/mfd/tps65911-comparator.c
+++ b/drivers/mfd/tps65911-comparator.c
@@ -26,7 +26,7 @@
 #define COMP1					1
 #define COMP2					2
 
-/* Comparator 1 voltage selection table in milivolts */
+/* Comparator 1 voltage selection table in millivolts */
 static const u16 COMP_VSEL_TABLE[] = {
 	0, 2500, 2500, 2500, 2500, 2550, 2600, 2650,
 	2700, 2750, 2800, 2850, 2900, 2950, 3000, 3050,
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index c7795096d43b..2661f6e366f9 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -452,14 +452,32 @@ config ARM_CHARLCD
 	  still useful.
 
 config BMP085
-	tristate "BMP085 digital pressure sensor"
+	bool
+	depends on SYSFS
+
+config BMP085_I2C
+	tristate "BMP085 digital pressure sensor on I2C"
+	select BMP085
+	select REGMAP_I2C
 	depends on I2C && SYSFS
 	help
-	  If you say yes here you get support for the Bosch Sensortec
-	  BMP085 digital pressure sensor.
+	  Say Y here if you want to support Bosch Sensortec's digital pressure
+	  sensor hooked to an I2C bus.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called bmp085.
+	  module will be called bmp085-i2c.
+
+config BMP085_SPI
+	tristate "BMP085 digital pressure sensor on SPI"
+	select BMP085
+	select REGMAP_SPI
+	depends on SPI_MASTER && SYSFS
+	help
+	  Say Y here if you want to support Bosch Sensortec's digital pressure
+	  sensor hooked to an SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bmp085-spi.
 
 config PCH_PHUB
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
@@ -490,14 +508,6 @@ config USB_SWITCH_FSA9480
 	  stereo and mono audio, video, microphone and UART data to use
 	  a common connector port.
 
-config MAX8997_MUIC
-	tristate "MAX8997 MUIC Support"
-	depends on MFD_MAX8997
-	help
-	  If you say yes here you get support for the MUIC device of
-	  Maxim MAX8997 PMIC.
-	  The MAX8997 MUIC is a USB port accessory detector and switch.
-
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
@@ -506,4 +516,5 @@ source "drivers/misc/ti-st/Kconfig"
 source "drivers/misc/lis3lv02d/Kconfig"
 source "drivers/misc/carma/Kconfig"
 source "drivers/misc/altera-stapl/Kconfig"
+source "drivers/misc/mei/Kconfig"
 endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 3e1d80106f04..456972faaeb3 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
 obj-$(CONFIG_BMP085)		+= bmp085.o
+obj-$(CONFIG_BMP085_I2C)	+= bmp085-i2c.o
+obj-$(CONFIG_BMP085_SPI)	+= bmp085-spi.o
 obj-$(CONFIG_ICS932S401)	+= ics932s401.o
 obj-$(CONFIG_LKDTM)		+= lkdtm.o
 obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
@@ -48,4 +50,4 @@ obj-y				+= lis3lv02d/
 obj-y				+= carma/
 obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
 obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
-obj-$(CONFIG_MAX8997_MUIC)	+= max8997-muic.o
+obj-$(CONFIG_INTEL_MEI)		+= mei/
diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c
index 1d1d42615915..6938f1be664d 100644
--- a/drivers/misc/ad525x_dpot.c
+++ b/drivers/misc/ad525x_dpot.c
@@ -749,7 +749,7 @@ exit:
 }
 EXPORT_SYMBOL(ad_dpot_probe);
 
-__devexit int ad_dpot_remove(struct device *dev)
+int ad_dpot_remove(struct device *dev)
 {
 	struct dpot_data *data = dev_get_drvdata(dev);
 	int i;
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index 54f6f39f990a..f1f9877f3fdf 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -248,7 +248,7 @@ static const struct i2c_device_id bh1780_id[] = {
 
 static struct i2c_driver bh1780_driver = {
 	.probe		= bh1780_probe,
-	.remove		= bh1780_remove,
+	.remove		= __devexit_p(bh1780_remove),
 	.id_table	= bh1780_id,
 	.driver = {
 		.name = "bh1780",
diff --git a/drivers/misc/bmp085-i2c.c b/drivers/misc/bmp085-i2c.c
new file mode 100644
index 000000000000..9943971c13e3
--- /dev/null
+++ b/drivers/misc/bmp085-i2c.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2012  Bosch Sensortec GmbH
+ * Copyright (c) 2012  Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include "bmp085.h"
+
+#define BMP085_I2C_ADDRESS	0x77
+
+static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS,
+							I2C_CLIENT_END };
+
+static int bmp085_i2c_detect(struct i2c_client *client,
+			     struct i2c_board_info *info)
+{
+	if (client->addr != BMP085_I2C_ADDRESS)
+		return -ENODEV;
+
+	return bmp085_detect(&client->dev);
+}
+
+static int __devinit bmp085_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	int err;
+	struct regmap *regmap = devm_regmap_init_i2c(client,
+						     &bmp085_regmap_config);
+
+	if (IS_ERR(regmap)) {
+		err = PTR_ERR(regmap);
+		dev_err(&client->dev, "Failed to init regmap: %d\n", err);
+		return err;
+	}
+
+	return bmp085_probe(&client->dev, regmap);
+}
+
+static int bmp085_i2c_remove(struct i2c_client *client)
+{
+	return bmp085_remove(&client->dev);
+}
+
+static const struct of_device_id bmp085_of_match[] = {
+	{ .compatible = "bosch,bmp085", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bmp085_of_match);
+
+static const struct i2c_device_id bmp085_id[] = {
+	{ BMP085_NAME, 0 },
+	{ "bmp180", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, bmp085_id);
+
+static struct i2c_driver bmp085_i2c_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= BMP085_NAME,
+		.of_match_table = bmp085_of_match
+	},
+	.id_table	= bmp085_id,
+	.probe		= bmp085_i2c_probe,
+	.remove		= __devexit_p(bmp085_i2c_remove),
+
+	.detect		= bmp085_i2c_detect,
+	.address_list	= normal_i2c
+};
+
+module_i2c_driver(bmp085_i2c_driver);
+
+MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
+MODULE_DESCRIPTION("BMP085 I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/bmp085-spi.c b/drivers/misc/bmp085-spi.c
new file mode 100644
index 000000000000..78aaff9b5231
--- /dev/null
+++ b/drivers/misc/bmp085-spi.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2012  Bosch Sensortec GmbH
+ * Copyright (c) 2012  Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include "bmp085.h"
+
+static int __devinit bmp085_spi_probe(struct spi_device *client)
+{
+	int err;
+	struct regmap *regmap;
+
+	client->bits_per_word = 8;
+	err = spi_setup(client);
+	if (err < 0) {
+		dev_err(&client->dev, "spi_setup failed!\n");
+		return err;
+	}
+
+	regmap = devm_regmap_init_spi(client, &bmp085_regmap_config);
+	if (IS_ERR(regmap)) {
+		err = PTR_ERR(regmap);
+		dev_err(&client->dev, "Failed to init regmap: %d\n", err);
+		return err;
+	}
+
+	return bmp085_probe(&client->dev, regmap);
+}
+
+static int bmp085_spi_remove(struct spi_device *client)
+{
+	return bmp085_remove(&client->dev);
+}
+
+static const struct of_device_id bmp085_of_match[] = {
+	{ .compatible = "bosch,bmp085", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bmp085_of_match);
+
+static const struct spi_device_id bmp085_id[] = {
+	{ "bmp180", 0 },
+	{ "bmp181", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, bmp085_id);
+
+static struct spi_driver bmp085_spi_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= BMP085_NAME,
+		.of_match_table = bmp085_of_match
+	},
+	.id_table	= bmp085_id,
+	.probe		= bmp085_spi_probe,
+	.remove		= __devexit_p(bmp085_spi_remove)
+};
+
+static int __init bmp085_spi_init(void)
+{
+	return spi_register_driver(&bmp085_spi_driver);
+}
+
+static void __exit bmp085_spi_exit(void)
+{
+	spi_unregister_driver(&bmp085_spi_driver);
+}
+
+MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
+MODULE_DESCRIPTION("BMP085 SPI bus driver");
+MODULE_LICENSE("GPL");
+
+module_init(bmp085_spi_init);
+module_exit(bmp085_spi_exit);
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index 76c3064629f1..62e418293b7e 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -1,62 +1,62 @@
 /*  Copyright (c) 2010  Christoph Mair <christoph.mair@gmail.com>
-
-    This driver supports the bmp085 digital barometric pressure
-    and temperature sensor from Bosch Sensortec. The datasheet
-    is available from their website:
-    http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
-
-    A pressure measurement is issued by reading from pressure0_input.
-    The return value ranges from 30000 to 110000 pascal with a resulution
-    of 1 pascal (0.01 millibar) which enables measurements from 9000m above
-    to 500m below sea level.
-
-    The temperature can be read from temp0_input. Values range from
-    -400 to 850 representing the ambient temperature in degree celsius
-    multiplied by 10.The resolution is 0.1 celsius.
-
-    Because ambient pressure is temperature dependent, a temperature
-    measurement will be executed automatically even if the user is reading
-    from pressure0_input. This happens if the last temperature measurement
-    has been executed more then one second ago.
-
-    To decrease RMS noise from pressure measurements, the bmp085 can
-    autonomously calculate the average of up to eight samples. This is
-    set up by writing to the oversampling sysfs file. Accepted values
-    are 0, 1, 2 and 3. 2^x when x is the value written to this file
-    specifies the number of samples used to calculate the ambient pressure.
-    RMS noise is specified with six pascal (without averaging) and decreases
-    down to 3 pascal when using an oversampling setting of 3.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
+ *  Copyright (c) 2012  Bosch Sensortec GmbH
+ *  Copyright (c) 2012  Unixphere AB
+ *
+ *  This driver supports the bmp085 and bmp18x digital barometric pressure
+ *  and temperature sensors from Bosch Sensortec. The datasheets
+ *  are available from their website:
+ *  http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
+ *  http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP180-DS000-07.pdf
+ *
+ *  A pressure measurement is issued by reading from pressure0_input.
+ *  The return value ranges from 30000 to 110000 pascal with a resulution
+ *  of 1 pascal (0.01 millibar) which enables measurements from 9000m above
+ *  to 500m below sea level.
+ *
+ *  The temperature can be read from temp0_input. Values range from
+ *  -400 to 850 representing the ambient temperature in degree celsius
+ *  multiplied by 10.The resolution is 0.1 celsius.
+ *
+ *  Because ambient pressure is temperature dependent, a temperature
+ *  measurement will be executed automatically even if the user is reading
+ *  from pressure0_input. This happens if the last temperature measurement
+ *  has been executed more then one second ago.
+ *
+ *  To decrease RMS noise from pressure measurements, the bmp085 can
+ *  autonomously calculate the average of up to eight samples. This is
+ *  set up by writing to the oversampling sysfs file. Accepted values
+ *  are 0, 1, 2 and 3. 2^x when x is the value written to this file
+ *  specifies the number of samples used to calculate the ambient pressure.
+ *  RMS noise is specified with six pascal (without averaging) and decreases
+ *  down to 3 pascal when using an oversampling setting of 3.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
 
 #include <linux/module.h>
+#include <linux/device.h>
 #include <linux/init.h>
-#include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/of.h>
+#include "bmp085.h"
 
-
-#define BMP085_I2C_ADDRESS		0x77
 #define BMP085_CHIP_ID			0x55
-
 #define BMP085_CALIBRATION_DATA_START	0xAA
 #define BMP085_CALIBRATION_DATA_LENGTH	11	/* 16 bit values */
 #define BMP085_CHIP_ID_REG		0xD0
-#define BMP085_VERSION_REG		0xD1
 #define BMP085_CTRL_REG			0xF4
 #define BMP085_TEMP_MEASUREMENT		0x2E
 #define BMP085_PRESSURE_MEASUREMENT	0x34
@@ -65,12 +65,6 @@
 #define BMP085_CONVERSION_REGISTER_XLSB	0xF8
 #define BMP085_TEMP_CONVERSION_TIME	5
 
-#define BMP085_CLIENT_NAME		"bmp085"
-
-
-static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS,
-							I2C_CLIENT_END };
-
 struct bmp085_calibration_data {
 	s16 AC1, AC2, AC3;
 	u16 AC4, AC5, AC6;
@@ -78,35 +72,30 @@ struct bmp085_calibration_data {
 	s16 MB, MC, MD;
 };
 
-
-/* Each client has this additional data */
 struct bmp085_data {
-	struct i2c_client *client;
-	struct mutex lock;
-	struct bmp085_calibration_data calibration;
-	u32 raw_temperature;
-	u32 raw_pressure;
-	unsigned char oversampling_setting;
+	struct	device *dev;
+	struct  regmap *regmap;
+	struct	mutex lock;
+	struct	bmp085_calibration_data calibration;
+	u8	oversampling_setting;
+	u32	raw_temperature;
+	u32	raw_pressure;
+	u32	temp_measurement_period;
 	unsigned long last_temp_measurement;
-	s32 b6; /* calculated temperature correction coefficient */
+	u8	chip_id;
+	s32	b6; /* calculated temperature correction coefficient */
 };
 
-
-static s32 bmp085_read_calibration_data(struct i2c_client *client)
+static s32 bmp085_read_calibration_data(struct bmp085_data *data)
 {
 	u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
-	struct bmp085_data *data = i2c_get_clientdata(client);
 	struct bmp085_calibration_data *cali = &(data->calibration);
-	s32 status = i2c_smbus_read_i2c_block_data(client,
-				BMP085_CALIBRATION_DATA_START,
-				BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16),
-				(u8 *)tmp);
+	s32 status = regmap_bulk_read(data->regmap,
+				BMP085_CALIBRATION_DATA_START, (u8 *)tmp,
+				(BMP085_CALIBRATION_DATA_LENGTH << 1));
 	if (status < 0)
 		return status;
 
-	if (status != BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16))
-		return -EIO;
-
 	cali->AC1 =  be16_to_cpu(tmp[0]);
 	cali->AC2 =  be16_to_cpu(tmp[1]);
 	cali->AC3 =  be16_to_cpu(tmp[2]);
@@ -121,30 +110,26 @@ static s32 bmp085_read_calibration_data(struct i2c_client *client)
 	return 0;
 }
 
-
 static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
 {
 	u16 tmp;
 	s32 status;
 
 	mutex_lock(&data->lock);
-	status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
-						BMP085_TEMP_MEASUREMENT);
-	if (status != 0) {
-		dev_err(&data->client->dev,
+	status = regmap_write(data->regmap, BMP085_CTRL_REG,
+			      BMP085_TEMP_MEASUREMENT);
+	if (status < 0) {
+		dev_err(data->dev,
 			"Error while requesting temperature measurement.\n");
 		goto exit;
 	}
 	msleep(BMP085_TEMP_CONVERSION_TIME);
 
-	status = i2c_smbus_read_i2c_block_data(data->client,
-		BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp);
-	if (status < 0)
-		goto exit;
-	if (status != sizeof(tmp)) {
-		dev_err(&data->client->dev,
+	status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
+				 &tmp, sizeof(tmp));
+	if (status < 0) {
+		dev_err(data->dev,
 			"Error while reading temperature measurement result\n");
-		status = -EIO;
 		goto exit;
 	}
 	data->raw_temperature = be16_to_cpu(tmp);
@@ -162,10 +147,11 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
 	s32 status;
 
 	mutex_lock(&data->lock);
-	status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
-		BMP085_PRESSURE_MEASUREMENT + (data->oversampling_setting<<6));
-	if (status != 0) {
-		dev_err(&data->client->dev,
+	status = regmap_write(data->regmap, BMP085_CTRL_REG,
+			BMP085_PRESSURE_MEASUREMENT +
+			(data->oversampling_setting << 6));
+	if (status < 0) {
+		dev_err(data->dev,
 			"Error while requesting pressure measurement.\n");
 		goto exit;
 	}
@@ -174,14 +160,11 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
 	msleep(2+(3 << data->oversampling_setting));
 
 	/* copy data into a u32 (4 bytes), but skip the first byte. */
-	status = i2c_smbus_read_i2c_block_data(data->client,
-			BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1);
-	if (status < 0)
-		goto exit;
-	if (status != 3) {
-		dev_err(&data->client->dev,
+	status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
+				 ((u8 *)&tmp)+1, 3);
+	if (status < 0) {
+		dev_err(data->dev,
 			"Error while reading pressure measurement results\n");
-		status = -EIO;
 		goto exit;
 	}
 	data->raw_pressure = be32_to_cpu((tmp));
@@ -193,7 +176,6 @@ exit:
 	return status;
 }
 
-
 /*
  * This function starts the temperature measurement and returns the value
  * in tenth of a degree celsius.
@@ -205,7 +187,7 @@ static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature)
 	int status;
 
 	status = bmp085_update_raw_temperature(data);
-	if (status != 0)
+	if (status < 0)
 		goto exit;
 
 	x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15;
@@ -222,8 +204,10 @@ exit:
 /*
  * This function starts the pressure measurement and returns the value
  * in millibar. Since the pressure depends on the ambient temperature,
- * a temperature measurement is executed if the last known value is older
- * than one second.
+ * a temperature measurement is executed according to the given temperature
+ * measurement period (default is 1 sec boundary). This period could vary
+ * and needs to be adjusted according to the sensor environment, i.e. if big
+ * temperature variations then the temperature needs to be read out often.
  */
 static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
 {
@@ -234,16 +218,16 @@ static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
 	int status;
 
 	/* alt least every second force an update of the ambient temperature */
-	if (data->last_temp_measurement == 0 ||
-			time_is_before_jiffies(data->last_temp_measurement + 1*HZ)) {
+	if ((data->last_temp_measurement == 0) ||
+	    time_is_before_jiffies(data->last_temp_measurement + 1*HZ)) {
 		status = bmp085_get_temperature(data, NULL);
-		if (status != 0)
-			goto exit;
+		if (status < 0)
+			return status;
 	}
 
 	status = bmp085_update_raw_pressure(data);
-	if (status != 0)
-		goto exit;
+	if (status < 0)
+		return status;
 
 	x1 = (data->b6 * data->b6) >> 12;
 	x1 *= cali->B2;
@@ -274,15 +258,14 @@ static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
 
 	*pressure = p;
 
-exit:
-	return status;
+	return 0;
 }
 
 /*
  * This function sets the chip-internal oversampling. Valid values are 0..3.
  * The chip will use 2^oversampling samples for internal averaging.
  * This influences the measurement time and the accuracy; larger values
- * increase both. The datasheet gives on overview on how measurement time,
+ * increase both. The datasheet gives an overview on how measurement time,
  * accuracy and noise correlate.
  */
 static void bmp085_set_oversampling(struct bmp085_data *data,
@@ -306,22 +289,25 @@ static ssize_t set_oversampling(struct device *dev,
 				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct bmp085_data *data = i2c_get_clientdata(client);
+	struct bmp085_data *data = dev_get_drvdata(dev);
 	unsigned long oversampling;
-	int success = strict_strtoul(buf, 10, &oversampling);
-	if (success == 0) {
+	int err = kstrtoul(buf, 10, &oversampling);
+
+	if (err == 0) {
+		mutex_lock(&data->lock);
 		bmp085_set_oversampling(data, oversampling);
+		mutex_unlock(&data->lock);
 		return count;
 	}
-	return success;
+
+	return err;
 }
 
 static ssize_t show_oversampling(struct device *dev,
 				 struct device_attribute *attr, char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct bmp085_data *data = i2c_get_clientdata(client);
+	struct bmp085_data *data = dev_get_drvdata(dev);
+
 	return sprintf(buf, "%u\n", bmp085_get_oversampling(data));
 }
 static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO,
@@ -333,11 +319,10 @@ static ssize_t show_temperature(struct device *dev,
 {
 	int temperature;
 	int status;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct bmp085_data *data = i2c_get_clientdata(client);
+	struct bmp085_data *data = dev_get_drvdata(dev);
 
 	status = bmp085_get_temperature(data, &temperature);
-	if (status != 0)
+	if (status < 0)
 		return status;
 	else
 		return sprintf(buf, "%d\n", temperature);
@@ -350,11 +335,10 @@ static ssize_t show_pressure(struct device *dev,
 {
 	int pressure;
 	int status;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct bmp085_data *data = i2c_get_clientdata(client);
+	struct bmp085_data *data = dev_get_drvdata(dev);
 
 	status = bmp085_get_pressure(data, &pressure);
-	if (status != 0)
+	if (status < 0)
 		return status;
 	else
 		return sprintf(buf, "%d\n", pressure);
@@ -373,38 +357,70 @@ static const struct attribute_group bmp085_attr_group = {
 	.attrs = bmp085_attributes,
 };
 
-static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info)
+int bmp085_detect(struct device *dev)
 {
-	if (client->addr != BMP085_I2C_ADDRESS)
-		return -ENODEV;
+	struct bmp085_data *data = dev_get_drvdata(dev);
+	unsigned int id;
+	int ret;
 
-	if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID)
+	ret = regmap_read(data->regmap, BMP085_CHIP_ID_REG, &id);
+	if (ret < 0)
+		return ret;
+
+	if (id != data->chip_id)
 		return -ENODEV;
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(bmp085_detect);
 
-static int bmp085_init_client(struct i2c_client *client)
+static void __init bmp085_get_of_properties(struct bmp085_data *data)
 {
-	unsigned char version;
-	int status;
-	struct bmp085_data *data = i2c_get_clientdata(client);
-	data->client = client;
-	status = bmp085_read_calibration_data(client);
-	if (status != 0)
-		goto exit;
-	version = i2c_smbus_read_byte_data(client, BMP085_VERSION_REG);
+#ifdef CONFIG_OF
+	struct device_node *np = data->dev->of_node;
+	u32 prop;
+
+	if (!np)
+		return;
+
+	if (!of_property_read_u32(np, "chip-id", &prop))
+		data->chip_id = prop & 0xff;
+
+	if (!of_property_read_u32(np, "temp-measurement-period", &prop))
+		data->temp_measurement_period = (prop/100)*HZ;
+
+	if (!of_property_read_u32(np, "default-oversampling", &prop))
+		data->oversampling_setting = prop & 0xff;
+#endif
+}
+
+static int bmp085_init_client(struct bmp085_data *data)
+{
+	int status = bmp085_read_calibration_data(data);
+
+	if (status < 0)
+		return status;
+
+	/* default settings */
+	data->chip_id = BMP085_CHIP_ID;
 	data->last_temp_measurement = 0;
+	data->temp_measurement_period = 1*HZ;
 	data->oversampling_setting = 3;
+
+	bmp085_get_of_properties(data);
+
 	mutex_init(&data->lock);
-	dev_info(&data->client->dev, "BMP085 ver. %d.%d found.\n",
-			(version & 0x0F), (version & 0xF0) >> 4);
-exit:
-	return status;
+
+	return 0;
 }
 
-static int __devinit bmp085_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+struct regmap_config bmp085_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8
+};
+EXPORT_SYMBOL_GPL(bmp085_regmap_config);
+
+__devinit int bmp085_probe(struct device *dev, struct regmap *regmap)
 {
 	struct bmp085_data *data;
 	int err = 0;
@@ -415,58 +431,48 @@ static int __devinit bmp085_probe(struct i2c_client *client,
 		goto exit;
 	}
 
-	/* default settings after POR */
-	data->oversampling_setting = 0x00;
-
-	i2c_set_clientdata(client, data);
+	dev_set_drvdata(dev, data);
+	data->dev = dev;
+	data->regmap = regmap;
 
 	/* Initialize the BMP085 chip */
-	err = bmp085_init_client(client);
-	if (err != 0)
+	err = bmp085_init_client(data);
+	if (err < 0)
 		goto exit_free;
 
+	err = bmp085_detect(dev);
+	if (err < 0) {
+		dev_err(dev, "%s: chip_id failed!\n", BMP085_NAME);
+		goto exit_free;
+	}
+
 	/* Register sysfs hooks */
-	err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group);
+	err = sysfs_create_group(&dev->kobj, &bmp085_attr_group);
 	if (err)
 		goto exit_free;
 
-	dev_info(&data->client->dev, "Successfully initialized bmp085!\n");
-	goto exit;
+	dev_info(dev, "Successfully initialized %s!\n", BMP085_NAME);
+
+	return 0;
 
 exit_free:
 	kfree(data);
 exit:
 	return err;
 }
+EXPORT_SYMBOL_GPL(bmp085_probe);
 
-static int __devexit bmp085_remove(struct i2c_client *client)
+int bmp085_remove(struct device *dev)
 {
-	sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group);
-	kfree(i2c_get_clientdata(client));
-	return 0;
-}
+	struct bmp085_data *data = dev_get_drvdata(dev);
 
-static const struct i2c_device_id bmp085_id[] = {
-	{ "bmp085", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, bmp085_id);
-
-static struct i2c_driver bmp085_driver = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name	= "bmp085"
-	},
-	.id_table	= bmp085_id,
-	.probe		= bmp085_probe,
-	.remove		= __devexit_p(bmp085_remove),
-
-	.detect		= bmp085_detect,
-	.address_list	= normal_i2c
-};
+	sysfs_remove_group(&data->dev->kobj, &bmp085_attr_group);
+	kfree(data);
 
-module_i2c_driver(bmp085_driver);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bmp085_remove);
 
-MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com");
+MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com>");
 MODULE_DESCRIPTION("BMP085 driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/misc/bmp085.h b/drivers/misc/bmp085.h
new file mode 100644
index 000000000000..2b8f615bca92
--- /dev/null
+++ b/drivers/misc/bmp085.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2012  Bosch Sensortec GmbH
+ * Copyright (c) 2012  Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _BMP085_H
+#define _BMP085_H
+
+#include <linux/regmap.h>
+
+#define BMP085_NAME		"bmp085"
+
+extern struct regmap_config bmp085_regmap_config;
+
+int bmp085_probe(struct device *dev, struct regmap *regmap);
+int bmp085_remove(struct device *dev);
+int bmp085_detect(struct device *dev);
+
+#endif
diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig
index e46af9a5810d..33ee834e1b83 100644
--- a/drivers/misc/c2port/Kconfig
+++ b/drivers/misc/c2port/Kconfig
@@ -5,7 +5,7 @@
 menuconfig C2PORT
 	tristate "Silicon Labs C2 port support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	default no
+	default n
 	help
 	  This option enables support for Silicon Labs C2 port used to
 	  program Silicon micro controller chips (and other 8051 compatible).
@@ -23,8 +23,8 @@ if C2PORT
 
 config C2PORT_DURAMAR_2150
 	tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)"
-	depends on X86 && C2PORT
-	default no
+	depends on X86
+	default n
 	help
 	  This option enables C2 support for the Eurotech's Duramar 2150
 	  on board micro controller.
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 01ab3c9b4cf7..0842c2994ee2 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -50,6 +50,7 @@ struct at25_data {
 #define	AT25_SR_BP1	0x08
 #define	AT25_SR_WPEN	0x80		/* writeprotect enable */
 
+#define	AT25_INSTR_BIT3	0x08		/* Additional address bit in instr */
 
 #define EE_MAXADDRLEN	3		/* 24 bit addresses, up to 2 MBytes */
 
@@ -75,6 +76,7 @@ at25_ee_read(
 	ssize_t			status;
 	struct spi_transfer	t[2];
 	struct spi_message	m;
+	u8			instr;
 
 	if (unlikely(offset >= at25->bin.size))
 		return 0;
@@ -84,7 +86,12 @@ at25_ee_read(
 		return count;
 
 	cp = command;
-	*cp++ = AT25_READ;
+
+	instr = AT25_READ;
+	if (at25->chip.flags & EE_INSTR_BIT3_IS_ADDR)
+		if (offset >= (1U << (at25->addrlen * 8)))
+			instr |= AT25_INSTR_BIT3;
+	*cp++ = instr;
 
 	/* 8/16/24-bit address is written MSB first */
 	switch (at25->addrlen) {
@@ -167,14 +174,14 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 	/* For write, rollover is within the page ... so we write at
 	 * most one page, then manually roll over to the next page.
 	 */
-	bounce[0] = AT25_WRITE;
 	mutex_lock(&at25->lock);
 	do {
 		unsigned long	timeout, retries;
 		unsigned	segment;
 		unsigned	offset = (unsigned) off;
-		u8		*cp = bounce + 1;
+		u8		*cp = bounce;
 		int		sr;
+		u8		instr;
 
 		*cp = AT25_WREN;
 		status = spi_write(at25->spi, cp, 1);
@@ -184,6 +191,12 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 			break;
 		}
 
+		instr = AT25_WRITE;
+		if (at25->chip.flags & EE_INSTR_BIT3_IS_ADDR)
+			if (offset >= (1U << (at25->addrlen * 8)))
+				instr |= AT25_INSTR_BIT3;
+		*cp++ = instr;
+
 		/* 8/16/24-bit address is written MSB first */
 		switch (at25->addrlen) {
 		default:	/* case 3 */
diff --git a/drivers/staging/mei/Kconfig b/drivers/misc/mei/Kconfig
index 47d78a72db2e..47d78a72db2e 100644
--- a/drivers/staging/mei/Kconfig
+++ b/drivers/misc/mei/Kconfig
diff --git a/drivers/staging/mei/Makefile b/drivers/misc/mei/Makefile
index 57168db6c7e5..57168db6c7e5 100644
--- a/drivers/staging/mei/Makefile
+++ b/drivers/misc/mei/Makefile
diff --git a/drivers/staging/mei/hw.h b/drivers/misc/mei/hw.h
index 24c4c962819e..24c4c962819e 100644
--- a/drivers/staging/mei/hw.h
+++ b/drivers/misc/mei/hw.h
diff --git a/drivers/staging/mei/init.c b/drivers/misc/mei/init.c
index eab711fb5fc4..a7d0bb0880ec 100644
--- a/drivers/staging/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -22,7 +22,7 @@
 #include "mei_dev.h"
 #include "hw.h"
 #include "interface.h"
-#include "mei.h"
+#include <linux/mei.h>
 
 const uuid_le mei_amthi_guid  = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d, 0xac,
 						0xa8, 0x46, 0xe0, 0xff, 0x65,
@@ -200,7 +200,7 @@ int mei_hw_init(struct mei_device *dev)
 		if (!(dev->me_hw_state & ME_RDY_HRA))
 			dev_dbg(&dev->pdev->dev, "ME turn off ME_RDY.\n");
 
-		printk(KERN_ERR "mei: link layer initialization failed.\n");
+		dev_err(&dev->pdev->dev, "link layer initialization failed.\n");
 		ret = -ENODEV;
 		goto out;
 	}
diff --git a/drivers/staging/mei/interface.c b/drivers/misc/mei/interface.c
index 9a2cfafc52a6..428d21e36416 100644
--- a/drivers/staging/mei/interface.c
+++ b/drivers/misc/mei/interface.c
@@ -16,7 +16,7 @@
 
 #include <linux/pci.h>
 #include "mei_dev.h"
-#include "mei.h"
+#include <linux/mei.h>
 #include "interface.h"
 
 
diff --git a/drivers/staging/mei/interface.h b/drivers/misc/mei/interface.h
index fb90c6f8a759..ddff5d16616f 100644
--- a/drivers/staging/mei/interface.h
+++ b/drivers/misc/mei/interface.h
@@ -19,7 +19,7 @@
 #ifndef _MEI_INTERFACE_H_
 #define _MEI_INTERFACE_H_
 
-#include "mei.h"
+#include <linux/mei.h>
 #include "mei_dev.h"
 
 
@@ -51,8 +51,7 @@ int mei_flow_ctrl_creds(struct mei_device *dev, struct mei_cl *cl);
 
 int mei_wd_send(struct mei_device *dev);
 int mei_wd_stop(struct mei_device *dev, bool preserve);
-bool mei_wd_host_init(struct mei_device *dev);
-void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout);
+int mei_wd_host_init(struct mei_device *dev);
 /*
  * mei_watchdog_register  - Registering watchdog interface
  *   once we got connection to the WD Client
diff --git a/drivers/staging/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 2007d2447b1c..93936f1b75eb 100644
--- a/drivers/staging/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -22,7 +22,7 @@
 #include <linux/jiffies.h>
 
 #include "mei_dev.h"
-#include "mei.h"
+#include <linux/mei.h>
 #include "hw.h"
 #include "interface.h"
 
diff --git a/drivers/staging/mei/iorw.c b/drivers/misc/mei/iorw.c
index 0a80dc4e62f3..f9cced69b65e 100644
--- a/drivers/staging/mei/iorw.c
+++ b/drivers/misc/mei/iorw.c
@@ -35,7 +35,7 @@
 
 #include "mei_dev.h"
 #include "hw.h"
-#include "mei.h"
+#include <linux/mei.h>
 #include "interface.h"
 
 
diff --git a/drivers/staging/mei/main.c b/drivers/misc/mei/main.c
index 7c9321fa7bb1..c70333228337 100644
--- a/drivers/staging/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -14,6 +14,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -36,19 +38,10 @@
 #include <linux/miscdevice.h>
 
 #include "mei_dev.h"
-#include "mei.h"
+#include <linux/mei.h>
 #include "interface.h"
 
-
-#define MEI_READ_TIMEOUT 45
-#define MEI_DRIVER_NAME	"mei"
-#define MEI_DEV_NAME "mei"
-
-/*
- *  mei driver strings
- */
-static char mei_driver_name[] = MEI_DRIVER_NAME;
-static const char mei_driver_string[] = "Intel(R) Management Engine Interface";
+static const char mei_driver_name[] = "mei";
 
 /* The device pointer */
 /* Currently this driver works as long as there is only a single AMT device. */
@@ -931,7 +924,7 @@ static const struct file_operations mei_fops = {
  * Misc Device Struct
  */
 static struct miscdevice  mei_misc_device = {
-		.name = MEI_DRIVER_NAME,
+		.name = "mei",
 		.fops = &mei_fops,
 		.minor = MISC_DYNAMIC_MINOR,
 };
@@ -958,7 +951,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 	/* enable pci dev */
 	err = pci_enable_device(pdev);
 	if (err) {
-		printk(KERN_ERR "mei: Failed to enable pci device.\n");
+		dev_err(&pdev->dev, "failed to enable pci device.\n");
 		goto end;
 	}
 	/* set PCI host mastering  */
@@ -966,7 +959,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 	/* pci request regions for mei driver */
 	err = pci_request_regions(pdev, mei_driver_name);
 	if (err) {
-		printk(KERN_ERR "mei: Failed to get pci regions.\n");
+		dev_err(&pdev->dev, "failed to get pci regions.\n");
 		goto disable_device;
 	}
 	/* allocates and initializes the mei dev structure */
@@ -978,7 +971,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 	/* mapping  IO device memory */
 	dev->mem_addr = pci_iomap(pdev, 0, 0);
 	if (!dev->mem_addr) {
-		printk(KERN_ERR "mei: mapping I/O device memory failure.\n");
+		dev_err(&pdev->dev, "mapping I/O device memory failure.\n");
 		err = -ENOMEM;
 		goto free_device;
 	}
@@ -997,13 +990,13 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 			IRQF_SHARED, mei_driver_name, dev);
 
 	if (err) {
-		printk(KERN_ERR "mei: request_threaded_irq failure. irq = %d\n",
+		dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
 		       pdev->irq);
 		goto unmap_memory;
 	}
 	INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
 	if (mei_hw_init(dev)) {
-		printk(KERN_ERR "mei: Init hw failure.\n");
+		dev_err(&pdev->dev, "init hw failure.\n");
 		err = -ENODEV;
 		goto release_irq;
 	}
@@ -1020,7 +1013,7 @@ static int __devinit mei_probe(struct pci_dev *pdev,
 
 	mutex_unlock(&mei_mutex);
 
-	pr_debug("mei: Driver initialization successful.\n");
+	pr_debug("initialization successful.\n");
 
 	return 0;
 
@@ -1041,7 +1034,7 @@ disable_device:
 	pci_disable_device(pdev);
 end:
 	mutex_unlock(&mei_mutex);
-	printk(KERN_ERR "mei: Driver initialization failed.\n");
+	dev_err(&pdev->dev, "initialization failed.\n");
 	return err;
 }
 
@@ -1160,8 +1153,8 @@ static int mei_pci_resume(struct device *device)
 			IRQF_SHARED, mei_driver_name, dev);
 
 	if (err) {
-		printk(KERN_ERR "mei: Request_irq failure. irq = %d\n",
-		       pdev->irq);
+		dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
+				pdev->irq);
 		return err;
 	}
 
@@ -1204,11 +1197,11 @@ static int __init mei_init_module(void)
 {
 	int ret;
 
-	pr_debug("mei: %s\n", mei_driver_string);
+	pr_debug("loading.\n");
 	/* init pci module */
 	ret = pci_register_driver(&mei_driver);
 	if (ret < 0)
-		printk(KERN_ERR "mei: Error registering driver.\n");
+		pr_err("error registering driver.\n");
 
 	return ret;
 }
@@ -1226,7 +1219,7 @@ static void __exit mei_exit_module(void)
 	misc_deregister(&mei_misc_device);
 	pci_unregister_driver(&mei_driver);
 
-	pr_debug("mei: Driver unloaded successfully.\n");
+	pr_debug("unloaded successfully.\n");
 }
 
 module_exit(mei_exit_module);
diff --git a/drivers/staging/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 10b1b4e2f8ac..63d7ee97c5fb 100644
--- a/drivers/staging/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -19,7 +19,7 @@
 
 #include <linux/types.h>
 #include <linux/watchdog.h>
-#include "mei.h"
+#include <linux/mei.h>
 #include "hw.h"
 
 /*
diff --git a/drivers/staging/mei/wd.c b/drivers/misc/mei/wd.c
index cf4c29d10e7f..6be5605707b4 100644
--- a/drivers/staging/mei/wd.c
+++ b/drivers/misc/mei/wd.c
@@ -24,7 +24,7 @@
 #include "mei_dev.h"
 #include "hw.h"
 #include "interface.h"
-#include "mei.h"
+#include <linux/mei.h>
 
 static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 };
 static const u8 mei_stop_wd_params[] = { 0x02, 0x02, 0x14, 0x10 };
@@ -45,23 +45,22 @@ const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89,
 						0x9D, 0xA9, 0x15, 0x14, 0xCB,
 						0x32, 0xAB);
 
-void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
+static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout)
 {
-	dev_dbg(&dev->pdev->dev, "timeout=%d.\n", timeout);
+	dev_dbg(&dev->pdev->dev, "wd: set timeout=%d.\n", timeout);
 	memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_PARAMS_SIZE);
-	memcpy(dev->wd_data + MEI_WD_PARAMS_SIZE,
-			&timeout, sizeof(u16));
+	memcpy(dev->wd_data + MEI_WD_PARAMS_SIZE, &timeout, sizeof(u16));
 }
 
 /**
  * host_init_wd - mei initialization wd.
  *
  * @dev: the device structure
+ * returns -ENENT if wd client cannot be found
+ *         -EIO if write has failed
  */
-bool mei_wd_host_init(struct mei_device *dev)
+int mei_wd_host_init(struct mei_device *dev)
 {
-	bool ret = false;
-
 	mei_cl_init(&dev->wd_cl, dev);
 
 	/* look for WD client and connect to it */
@@ -72,25 +71,21 @@ bool mei_wd_host_init(struct mei_device *dev)
 	mei_find_me_client_update_filext(dev, &dev->wd_cl,
 				&mei_wd_guid, MEI_WD_HOST_CLIENT_ID);
 
-	dev_dbg(&dev->pdev->dev, "check wd_cl\n");
-	if (MEI_FILE_CONNECTING == dev->wd_cl.state) {
-		if (mei_connect(dev, &dev->wd_cl)) {
-			dev_dbg(&dev->pdev->dev, "Failed to connect to WD client\n");
-			dev->wd_cl.state = MEI_FILE_DISCONNECTED;
-			dev->wd_cl.host_client_id = 0;
-			ret = false;
-			goto end;
-		} else {
-			dev->wd_cl.timer_count = CONNECT_TIMEOUT;
-		}
-	} else {
-		dev_dbg(&dev->pdev->dev, "Failed to find WD client\n");
-		ret = false;
-		goto end;
+	dev_dbg(&dev->pdev->dev, "wd: check client\n");
+	if (MEI_FILE_CONNECTING != dev->wd_cl.state) {
+		dev_info(&dev->pdev->dev, "wd: failed to find the client\n");
+		return -ENOENT;
 	}
 
-end:
-	return ret;
+	if (mei_connect(dev, &dev->wd_cl)) {
+		dev_err(&dev->pdev->dev, "wd: failed to connect to the client\n");
+		dev->wd_cl.state = MEI_FILE_DISCONNECTED;
+		dev->wd_cl.host_client_id = 0;
+		return -EIO;
+	}
+	dev->wd_cl.timer_count = CONNECT_TIMEOUT;
+
+	return 0;
 }
 
 /**
@@ -159,7 +154,7 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
 			if (ret)
 				goto out;
 		} else {
-			dev_dbg(&dev->pdev->dev, "send stop WD failed\n");
+			dev_err(&dev->pdev->dev, "wd: send stop failed\n");
 		}
 
 		dev->wd_pending = false;
@@ -173,13 +168,13 @@ int mei_wd_stop(struct mei_device *dev, bool preserve)
 					dev->wd_stopped, 10 * HZ);
 	mutex_lock(&dev->device_lock);
 	if (dev->wd_stopped) {
-		dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret);
+		dev_dbg(&dev->pdev->dev, "wd: stop completed ret=%d.\n", ret);
 		ret = 0;
 	} else {
 		if (!ret)
 			ret = -ETIMEDOUT;
 		dev_warn(&dev->pdev->dev,
-			"stop wd failed to complete ret=%d.\n", ret);
+			"wd: stop failed to complete ret=%d.\n", ret);
 	}
 
 	if (preserve)
@@ -208,13 +203,15 @@ static int mei_wd_ops_start(struct watchdog_device *wd_dev)
 	mutex_lock(&dev->device_lock);
 
 	if (dev->mei_state != MEI_ENABLED) {
-		dev_dbg(&dev->pdev->dev, "mei_state != MEI_ENABLED  mei_state= %d\n",
-		    dev->mei_state);
+		dev_dbg(&dev->pdev->dev,
+			"wd: mei_state != MEI_ENABLED  mei_state = %d\n",
+			dev->mei_state);
 		goto end_unlock;
 	}
 
 	if (dev->wd_cl.state != MEI_FILE_CONNECTED)	{
-		dev_dbg(&dev->pdev->dev, "MEI Driver is not connected to Watchdog Client\n");
+		dev_dbg(&dev->pdev->dev,
+			"MEI Driver is not connected to Watchdog Client\n");
 		goto end_unlock;
 	}
 
@@ -267,7 +264,7 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
 	mutex_lock(&dev->device_lock);
 
 	if (dev->wd_cl.state != MEI_FILE_CONNECTED) {
-		dev_dbg(&dev->pdev->dev, "wd is not connected.\n");
+		dev_err(&dev->pdev->dev, "wd: not connected.\n");
 		ret = -ENODEV;
 		goto end;
 	}
@@ -277,16 +274,17 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev)
 		mei_flow_ctrl_creds(dev, &dev->wd_cl) > 0) {
 
 		dev->mei_host_buffer_is_empty = false;
-		dev_dbg(&dev->pdev->dev, "sending watchdog ping\n");
+		dev_dbg(&dev->pdev->dev, "wd: sending ping\n");
 
 		if (mei_wd_send(dev)) {
-			dev_dbg(&dev->pdev->dev, "wd send failed.\n");
+			dev_err(&dev->pdev->dev, "wd: send failed.\n");
 			ret = -EIO;
 			goto end;
 		}
 
 		if (mei_flow_ctrl_reduce(dev, &dev->wd_cl)) {
-			dev_dbg(&dev->pdev->dev, "mei_flow_ctrl_reduce() failed.\n");
+			dev_err(&dev->pdev->dev,
+				"wd: mei_flow_ctrl_reduce() failed.\n");
 			ret = -EIO;
 			goto end;
 		}
@@ -346,7 +344,7 @@ static const struct watchdog_info wd_info = {
 		.options = WDIOF_KEEPALIVEPING,
 };
 
-struct watchdog_device amt_wd_dev = {
+static struct watchdog_device amt_wd_dev = {
 		.info = &wd_info,
 		.ops = &wd_ops,
 		.timeout = AMT_WD_DEFAULT_TIMEOUT,
@@ -362,10 +360,12 @@ void  mei_watchdog_register(struct mei_device *dev)
 	dev->wd_due_counter = !!dev->wd_timeout;
 
 	if (watchdog_register_device(&amt_wd_dev)) {
-		dev_err(&dev->pdev->dev, "unable to register watchdog device.\n");
+		dev_err(&dev->pdev->dev,
+			"wd: unable to register watchdog device.\n");
 		dev->wd_interface_reg = false;
 	} else {
-		dev_dbg(&dev->pdev->dev, "successfully register watchdog interface.\n");
+		dev_dbg(&dev->pdev->dev,
+			"wd: successfully register watchdog interface.\n");
 		dev->wd_interface_reg = true;
 	}
 }
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 10fc4785dba7..9fbcacd703d5 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -65,10 +65,6 @@
 #define PCI_VENDOR_ID_ROHM			0x10db
 #define PCI_DEVICE_ID_ROHM_ML7213_PHUB		0x801A
 
-/* Macros for ML7213 */
-#define PCI_VENDOR_ID_ROHM			0x10db
-#define PCI_DEVICE_ID_ROHM_ML7213_PHUB		0x801A
-
 /* Macros for ML7223 */
 #define PCI_DEVICE_ID_ROHM_ML7223_mPHUB	0x8012 /* for Bus-m */
 #define PCI_DEVICE_ID_ROHM_ML7223_nPHUB	0x8002 /* for Bus-n */
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index 383133b201a1..b7eb545394b1 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -888,7 +888,7 @@ static struct pci_driver pti_pci_driver = {
 	.name		= PCINAME,
 	.id_table	= pci_ids,
 	.probe		= pti_pci_probe,
-	.remove		= pti_pci_remove,
+	.remove		= __devexit_p(pti_pci_remove),
 };
 
 /**
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 8272c02668d6..50aa90aa7a7f 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -383,7 +383,7 @@ static void doc_set_device_id(struct docg3 *docg3, int id)
  * leveling counters are stored.  To access this last area of 4 bytes, a special
  * mode must be input to the flash ASIC.
  *
- * Returns 0 if no error occured, -EIO else.
+ * Returns 0 if no error occurred, -EIO else.
  */
 static int doc_set_extra_page_mode(struct docg3 *docg3)
 {
@@ -681,7 +681,7 @@ out:
  *  - one read of 512 bytes at offset 0
  *  - one read of 512 bytes at offset 512 + 16
  *
- * Returns 0 if successful, -EIO if a read error occured.
+ * Returns 0 if successful, -EIO if a read error occurred.
  */
 static int doc_read_page_prepare(struct docg3 *docg3, int block0, int block1,
 				 int page, int offset)
@@ -839,7 +839,7 @@ static void calc_block_sector(loff_t from, int *block0, int *block1, int *page,
  *
  * Reads flash memory OOB area of pages.
  *
- * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred
  */
 static int doc_read_oob(struct mtd_info *mtd, loff_t from,
 			struct mtd_oob_ops *ops)
@@ -971,7 +971,7 @@ err_in_read:
  * Reads flash memory pages. This function does not read the OOB chunk, but only
  * the page data.
  *
- * Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
+ * Returns 0 if read successful, of -EIO, -EINVAL if an error occurred
  */
 static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
 	     size_t *retlen, u_char *buf)
@@ -1109,7 +1109,7 @@ static int doc_get_op_status(struct docg3 *docg3)
  * Wait for the chip to be ready again after erase or write operation, and check
  * erase/write status.
  *
- * Returns 0 if erase successfull, -EIO if erase/write issue, -ETIMEOUT if
+ * Returns 0 if erase successful, -EIO if erase/write issue, -ETIMEOUT if
  * timeout
  */
 static int doc_write_erase_wait_status(struct docg3 *docg3)
@@ -1186,7 +1186,7 @@ static int doc_erase_block(struct docg3 *docg3, int block0, int block1)
  * Erase a bunch of contiguous blocks, by pairs, as a "mtd" page of 1024 is
  * split into 2 pages of 512 bytes on 2 contiguous blocks.
  *
- * Returns 0 if erase successful, -EINVAL if adressing error, -EIO if erase
+ * Returns 0 if erase successful, -EINVAL if addressing error, -EIO if erase
  * issue
  */
 static int doc_erase(struct mtd_info *mtd, struct erase_info *info)
@@ -1397,7 +1397,7 @@ static int doc_backup_oob(struct docg3 *docg3, loff_t to,
  * Or provide data without OOB, and then a all zeroed OOB will be used (ECC will
  * still be filled in if asked for).
  *
- * Returns 0 is successfull, EINVAL if length is not 14 bytes
+ * Returns 0 is successful, EINVAL if length is not 14 bytes
  */
 static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
 			 struct mtd_oob_ops *ops)
@@ -1945,7 +1945,7 @@ static void doc_release_device(struct mtd_info *mtd)
  * docg3_resume - Awakens docg3 floor
  * @pdev: platfrom device
  *
- * Returns 0 (always successfull)
+ * Returns 0 (always successful)
  */
 static int docg3_resume(struct platform_device *pdev)
 {
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index 4dcc752a0c0b..738ee8dc16cd 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -52,12 +52,4 @@ config MTD_UBI_GLUEBI
 	   work on top of UBI. Do not enable this unless you use legacy
 	   software.
 
-config MTD_UBI_DEBUG
-	bool "UBI debugging"
-	depends on SYSFS
-	select DEBUG_FS
-	select KALLSYMS
-	help
-	  This option enables UBI debugging.
-
 endif # MTD_UBI
diff --git a/drivers/mtd/ubi/Makefile b/drivers/mtd/ubi/Makefile
index c9302a5452b0..a0803ac74712 100644
--- a/drivers/mtd/ubi/Makefile
+++ b/drivers/mtd/ubi/Makefile
@@ -1,7 +1,6 @@
 obj-$(CONFIG_MTD_UBI) += ubi.o
 
-ubi-y += vtbl.o vmt.o upd.o build.o cdev.o kapi.o eba.o io.o wl.o scan.o
-ubi-y += misc.o
+ubi-y += vtbl.o vmt.o upd.o build.o cdev.o kapi.o eba.o io.o wl.o attach.o
+ubi-y += misc.o debug.o
 
-ubi-$(CONFIG_MTD_UBI_DEBUG) += debug.o
 obj-$(CONFIG_MTD_UBI_GLUEBI) += gluebi.o
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/attach.c
index 12c43b44f815..bd27cbbb4066 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/attach.c
@@ -19,21 +19,21 @@
  */
 
 /*
- * UBI scanning sub-system.
+ * UBI attaching sub-system.
  *
- * This sub-system is responsible for scanning the flash media, checking UBI
- * headers and providing complete information about the UBI flash image.
+ * This sub-system is responsible for attaching MTD devices and it also
+ * implements flash media scanning.
  *
- * The scanning information is represented by a &struct ubi_scan_info' object.
- * Information about found volumes is represented by &struct ubi_scan_volume
+ * The attaching information is represented by a &struct ubi_attach_info'
+ * object. Information about volumes is represented by &struct ubi_ainf_volume
  * objects which are kept in volume RB-tree with root at the @volumes field.
  * The RB-tree is indexed by the volume ID.
  *
- * Scanned logical eraseblocks are represented by &struct ubi_scan_leb objects.
- * These objects are kept in per-volume RB-trees with the root at the
- * corresponding &struct ubi_scan_volume object. To put it differently, we keep
- * an RB-tree of per-volume objects and each of these objects is the root of
- * RB-tree of per-eraseblock objects.
+ * Logical eraseblocks are represented by &struct ubi_ainf_peb objects. These
+ * objects are kept in per-volume RB-trees with the root at the corresponding
+ * &struct ubi_ainf_volume object. To put it differently, we keep an RB-tree of
+ * per-volume objects and each of these objects is the root of RB-tree of
+ * per-LEB objects.
  *
  * Corrupted physical eraseblocks are put to the @corr list, free physical
  * eraseblocks are put to the @free list and the physical eraseblock to be
@@ -51,28 +51,29 @@
  *
  * 1. Corruptions caused by power cuts. These are expected corruptions and UBI
  * tries to handle them gracefully, without printing too many warnings and
- * error messages. The idea is that we do not lose important data in these case
- * - we may lose only the data which was being written to the media just before
- * the power cut happened, and the upper layers (e.g., UBIFS) are supposed to
- * handle such data losses (e.g., by using the FS journal).
+ * error messages. The idea is that we do not lose important data in these
+ * cases - we may lose only the data which were being written to the media just
+ * before the power cut happened, and the upper layers (e.g., UBIFS) are
+ * supposed to handle such data losses (e.g., by using the FS journal).
  *
  * When UBI detects a corruption (CRC-32 mismatch) in a PEB, and it looks like
  * the reason is a power cut, UBI puts this PEB to the @erase list, and all
  * PEBs in the @erase list are scheduled for erasure later.
  *
  * 2. Unexpected corruptions which are not caused by power cuts. During
- * scanning, such PEBs are put to the @corr list and UBI preserves them.
+ * attaching, such PEBs are put to the @corr list and UBI preserves them.
  * Obviously, this lessens the amount of available PEBs, and if at some  point
  * UBI runs out of free PEBs, it switches to R/O mode. UBI also loudly informs
  * about such PEBs every time the MTD device is attached.
  *
  * However, it is difficult to reliably distinguish between these types of
- * corruptions and UBI's strategy is as follows. UBI assumes corruption type 2
- * if the VID header is corrupted and the data area does not contain all 0xFFs,
- * and there were no bit-flips or integrity errors while reading the data area.
- * Otherwise UBI assumes corruption type 1. So the decision criteria are as
- * follows.
- *   o If the data area contains only 0xFFs, there is no data, and it is safe
+ * corruptions and UBI's strategy is as follows (in case of attaching by
+ * scanning). UBI assumes corruption type 2 if the VID header is corrupted and
+ * the data area does not contain all 0xFFs, and there were no bit-flips or
+ * integrity errors (e.g., ECC errors in case of NAND) while reading the data
+ * area.  Otherwise UBI assumes corruption type 1. So the decision criteria
+ * are as follows.
+ *   o If the data area contains only 0xFFs, there are no data, and it is safe
  *     to just erase this PEB - this is corruption type 1.
  *   o If the data area has bit-flips or data integrity errors (ECC errors on
  *     NAND), it is probably a PEB which was being erased when power cut
@@ -88,11 +89,7 @@
 #include <linux/random.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si);
-#else
-#define paranoid_check_si(ubi, si) 0
-#endif
+static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai);
 
 /* Temporary variables used during scanning */
 static struct ubi_ec_hdr *ech;
@@ -100,13 +97,18 @@ static struct ubi_vid_hdr *vidh;
 
 /**
  * add_to_list - add physical eraseblock to a list.
- * @si: scanning information
+ * @ai: attaching information
  * @pnum: physical eraseblock number to add
+ * @vol_id: the last used volume id for the PEB
+ * @lnum: the last used LEB number for the PEB
  * @ec: erase counter of the physical eraseblock
  * @to_head: if not zero, add to the head of the list
  * @list: the list to add to
  *
- * This function adds physical eraseblock @pnum to free, erase, or alien lists.
+ * This function allocates a 'struct ubi_ainf_peb' object for physical
+ * eraseblock @pnum and adds it to the "free", "erase", or "alien" lists.
+ * It stores the @lnum and @vol_id alongside, which can both be
+ * %UBI_UNKNOWN if they are not available, not readable, or not assigned.
  * If @to_head is not zero, PEB will be added to the head of the list, which
  * basically means it will be processed first later. E.g., we add corrupted
  * PEBs (corrupted due to power cuts) to the head of the erase list to make
@@ -114,65 +116,68 @@ static struct ubi_vid_hdr *vidh;
  * returns zero in case of success and a negative error code in case of
  * failure.
  */
-static int add_to_list(struct ubi_scan_info *si, int pnum, int ec, int to_head,
-		       struct list_head *list)
+static int add_to_list(struct ubi_attach_info *ai, int pnum, int vol_id,
+		       int lnum, int ec, int to_head, struct list_head *list)
 {
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 
-	if (list == &si->free) {
+	if (list == &ai->free) {
 		dbg_bld("add to free: PEB %d, EC %d", pnum, ec);
-	} else if (list == &si->erase) {
+	} else if (list == &ai->erase) {
 		dbg_bld("add to erase: PEB %d, EC %d", pnum, ec);
-	} else if (list == &si->alien) {
+	} else if (list == &ai->alien) {
 		dbg_bld("add to alien: PEB %d, EC %d", pnum, ec);
-		si->alien_peb_count += 1;
+		ai->alien_peb_count += 1;
 	} else
 		BUG();
 
-	seb = kmem_cache_alloc(si->scan_leb_slab, GFP_KERNEL);
-	if (!seb)
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
 		return -ENOMEM;
 
-	seb->pnum = pnum;
-	seb->ec = ec;
+	aeb->pnum = pnum;
+	aeb->vol_id = vol_id;
+	aeb->lnum = lnum;
+	aeb->ec = ec;
 	if (to_head)
-		list_add(&seb->u.list, list);
+		list_add(&aeb->u.list, list);
 	else
-		list_add_tail(&seb->u.list, list);
+		list_add_tail(&aeb->u.list, list);
 	return 0;
 }
 
 /**
  * add_corrupted - add a corrupted physical eraseblock.
- * @si: scanning information
+ * @ai: attaching information
  * @pnum: physical eraseblock number to add
  * @ec: erase counter of the physical eraseblock
  *
- * This function adds corrupted physical eraseblock @pnum to the 'corr' list.
- * The corruption was presumably not caused by a power cut. Returns zero in
- * case of success and a negative error code in case of failure.
+ * This function allocates a 'struct ubi_ainf_peb' object for a corrupted
+ * physical eraseblock @pnum and adds it to the 'corr' list.  The corruption
+ * was presumably not caused by a power cut. Returns zero in case of success
+ * and a negative error code in case of failure.
  */
-static int add_corrupted(struct ubi_scan_info *si, int pnum, int ec)
+static int add_corrupted(struct ubi_attach_info *ai, int pnum, int ec)
 {
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 
 	dbg_bld("add to corrupted: PEB %d, EC %d", pnum, ec);
 
-	seb = kmem_cache_alloc(si->scan_leb_slab, GFP_KERNEL);
-	if (!seb)
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
 		return -ENOMEM;
 
-	si->corr_peb_count += 1;
-	seb->pnum = pnum;
-	seb->ec = ec;
-	list_add(&seb->u.list, &si->corr);
+	ai->corr_peb_count += 1;
+	aeb->pnum = pnum;
+	aeb->ec = ec;
+	list_add(&aeb->u.list, &ai->corr);
 	return 0;
 }
 
 /**
  * validate_vid_hdr - check volume identifier header.
  * @vid_hdr: the volume identifier header to check
- * @sv: information about the volume this logical eraseblock belongs to
+ * @av: information about the volume this logical eraseblock belongs to
  * @pnum: physical eraseblock number the VID header came from
  *
  * This function checks that data stored in @vid_hdr is consistent. Returns
@@ -184,15 +189,15 @@ static int add_corrupted(struct ubi_scan_info *si, int pnum, int ec)
  * headers of the same volume.
  */
 static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
-			    const struct ubi_scan_volume *sv, int pnum)
+			    const struct ubi_ainf_volume *av, int pnum)
 {
 	int vol_type = vid_hdr->vol_type;
 	int vol_id = be32_to_cpu(vid_hdr->vol_id);
 	int used_ebs = be32_to_cpu(vid_hdr->used_ebs);
 	int data_pad = be32_to_cpu(vid_hdr->data_pad);
 
-	if (sv->leb_count != 0) {
-		int sv_vol_type;
+	if (av->leb_count != 0) {
+		int av_vol_type;
 
 		/*
 		 * This is not the first logical eraseblock belonging to this
@@ -200,28 +205,28 @@ static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
 		 * to the data in previous logical eraseblock headers.
 		 */
 
-		if (vol_id != sv->vol_id) {
-			dbg_err("inconsistent vol_id");
+		if (vol_id != av->vol_id) {
+			ubi_err("inconsistent vol_id");
 			goto bad;
 		}
 
-		if (sv->vol_type == UBI_STATIC_VOLUME)
-			sv_vol_type = UBI_VID_STATIC;
+		if (av->vol_type == UBI_STATIC_VOLUME)
+			av_vol_type = UBI_VID_STATIC;
 		else
-			sv_vol_type = UBI_VID_DYNAMIC;
+			av_vol_type = UBI_VID_DYNAMIC;
 
-		if (vol_type != sv_vol_type) {
-			dbg_err("inconsistent vol_type");
+		if (vol_type != av_vol_type) {
+			ubi_err("inconsistent vol_type");
 			goto bad;
 		}
 
-		if (used_ebs != sv->used_ebs) {
-			dbg_err("inconsistent used_ebs");
+		if (used_ebs != av->used_ebs) {
+			ubi_err("inconsistent used_ebs");
 			goto bad;
 		}
 
-		if (data_pad != sv->data_pad) {
-			dbg_err("inconsistent data_pad");
+		if (data_pad != av->data_pad) {
+			ubi_err("inconsistent data_pad");
 			goto bad;
 		}
 	}
@@ -230,74 +235,74 @@ static int validate_vid_hdr(const struct ubi_vid_hdr *vid_hdr,
 
 bad:
 	ubi_err("inconsistent VID header at PEB %d", pnum);
-	ubi_dbg_dump_vid_hdr(vid_hdr);
-	ubi_dbg_dump_sv(sv);
+	ubi_dump_vid_hdr(vid_hdr);
+	ubi_dump_av(av);
 	return -EINVAL;
 }
 
 /**
- * add_volume - add volume to the scanning information.
- * @si: scanning information
+ * add_volume - add volume to the attaching information.
+ * @ai: attaching information
  * @vol_id: ID of the volume to add
  * @pnum: physical eraseblock number
  * @vid_hdr: volume identifier header
  *
  * If the volume corresponding to the @vid_hdr logical eraseblock is already
- * present in the scanning information, this function does nothing. Otherwise
- * it adds corresponding volume to the scanning information. Returns a pointer
- * to the scanning volume object in case of success and a negative error code
- * in case of failure.
+ * present in the attaching information, this function does nothing. Otherwise
+ * it adds corresponding volume to the attaching information. Returns a pointer
+ * to the allocated "av" object in case of success and a negative error code in
+ * case of failure.
  */
-static struct ubi_scan_volume *add_volume(struct ubi_scan_info *si, int vol_id,
-					  int pnum,
+static struct ubi_ainf_volume *add_volume(struct ubi_attach_info *ai,
+					  int vol_id, int pnum,
 					  const struct ubi_vid_hdr *vid_hdr)
 {
-	struct ubi_scan_volume *sv;
-	struct rb_node **p = &si->volumes.rb_node, *parent = NULL;
+	struct ubi_ainf_volume *av;
+	struct rb_node **p = &ai->volumes.rb_node, *parent = NULL;
 
 	ubi_assert(vol_id == be32_to_cpu(vid_hdr->vol_id));
 
 	/* Walk the volume RB-tree to look if this volume is already present */
 	while (*p) {
 		parent = *p;
-		sv = rb_entry(parent, struct ubi_scan_volume, rb);
+		av = rb_entry(parent, struct ubi_ainf_volume, rb);
 
-		if (vol_id == sv->vol_id)
-			return sv;
+		if (vol_id == av->vol_id)
+			return av;
 
-		if (vol_id > sv->vol_id)
+		if (vol_id > av->vol_id)
 			p = &(*p)->rb_left;
 		else
 			p = &(*p)->rb_right;
 	}
 
 	/* The volume is absent - add it */
-	sv = kmalloc(sizeof(struct ubi_scan_volume), GFP_KERNEL);
-	if (!sv)
+	av = kmalloc(sizeof(struct ubi_ainf_volume), GFP_KERNEL);
+	if (!av)
 		return ERR_PTR(-ENOMEM);
 
-	sv->highest_lnum = sv->leb_count = 0;
-	sv->vol_id = vol_id;
-	sv->root = RB_ROOT;
-	sv->used_ebs = be32_to_cpu(vid_hdr->used_ebs);
-	sv->data_pad = be32_to_cpu(vid_hdr->data_pad);
-	sv->compat = vid_hdr->compat;
-	sv->vol_type = vid_hdr->vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME
+	av->highest_lnum = av->leb_count = 0;
+	av->vol_id = vol_id;
+	av->root = RB_ROOT;
+	av->used_ebs = be32_to_cpu(vid_hdr->used_ebs);
+	av->data_pad = be32_to_cpu(vid_hdr->data_pad);
+	av->compat = vid_hdr->compat;
+	av->vol_type = vid_hdr->vol_type == UBI_VID_DYNAMIC ? UBI_DYNAMIC_VOLUME
 							    : UBI_STATIC_VOLUME;
-	if (vol_id > si->highest_vol_id)
-		si->highest_vol_id = vol_id;
+	if (vol_id > ai->highest_vol_id)
+		ai->highest_vol_id = vol_id;
 
-	rb_link_node(&sv->rb, parent, p);
-	rb_insert_color(&sv->rb, &si->volumes);
-	si->vols_found += 1;
+	rb_link_node(&av->rb, parent, p);
+	rb_insert_color(&av->rb, &ai->volumes);
+	ai->vols_found += 1;
 	dbg_bld("added volume %d", vol_id);
-	return sv;
+	return av;
 }
 
 /**
  * compare_lebs - find out which logical eraseblock is newer.
  * @ubi: UBI device description object
- * @seb: first logical eraseblock to compare
+ * @aeb: first logical eraseblock to compare
  * @pnum: physical eraseblock number of the second logical eraseblock to
  * compare
  * @vid_hdr: volume identifier header of the second logical eraseblock
@@ -306,7 +311,7 @@ static struct ubi_scan_volume *add_volume(struct ubi_scan_info *si, int vol_id,
  * case of success this function returns a positive value, in case of failure, a
  * negative error code is returned. The success return codes use the following
  * bits:
- *     o bit 0 is cleared: the first PEB (described by @seb) is newer than the
+ *     o bit 0 is cleared: the first PEB (described by @aeb) is newer than the
  *       second PEB (described by @pnum and @vid_hdr);
  *     o bit 0 is set: the second PEB is newer;
  *     o bit 1 is cleared: no bit-flips were detected in the newer LEB;
@@ -314,7 +319,7 @@ static struct ubi_scan_volume *add_volume(struct ubi_scan_info *si, int vol_id,
  *     o bit 2 is cleared: the older LEB is not corrupted;
  *     o bit 2 is set: the older LEB is corrupted.
  */
-static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
+static int compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb,
 			int pnum, const struct ubi_vid_hdr *vid_hdr)
 {
 	void *buf;
@@ -323,7 +328,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 	struct ubi_vid_hdr *vh = NULL;
 	unsigned long long sqnum2 = be64_to_cpu(vid_hdr->sqnum);
 
-	if (sqnum2 == seb->sqnum) {
+	if (sqnum2 == aeb->sqnum) {
 		/*
 		 * This must be a really ancient UBI image which has been
 		 * created before sequence numbers support has been added. At
@@ -337,7 +342,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 	}
 
 	/* Obviously the LEB with lower sequence counter is older */
-	second_is_newer = !!(sqnum2 > seb->sqnum);
+	second_is_newer = (sqnum2 > aeb->sqnum);
 
 	/*
 	 * Now we know which copy is newer. If the copy flag of the PEB with
@@ -356,7 +361,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 			return 1;
 		}
 	} else {
-		if (!seb->copy_flag) {
+		if (!aeb->copy_flag) {
 			/* It is not a copy, so it is newer */
 			dbg_bld("first PEB %d is newer, copy_flag is unset",
 				pnum);
@@ -367,13 +372,13 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb,
 		if (!vh)
 			return -ENOMEM;
 
-		pnum = seb->pnum;
+		pnum = aeb->pnum;
 		err = ubi_io_read_vid_hdr(ubi, pnum, vh, 0);
 		if (err) {
 			if (err == UBI_IO_BITFLIPS)
 				bitflips = 1;
 			else {
-				dbg_err("VID of PEB %d header is bad, but it "
+				ubi_err("VID of PEB %d header is bad, but it "
 					"was OK earlier, err %d", pnum, err);
 				if (err > 0)
 					err = -EIO;
@@ -429,9 +434,9 @@ out_free_vidh:
 }
 
 /**
- * ubi_scan_add_used - add physical eraseblock to the scanning information.
+ * ubi_add_to_av - add used physical eraseblock to the attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  * @pnum: the physical eraseblock number
  * @ec: erase counter
  * @vid_hdr: the volume identifier header
@@ -444,14 +449,13 @@ out_free_vidh:
  * to be picked, while the older one has to be dropped. This function returns
  * zero in case of success and a negative error code in case of failure.
  */
-int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
-		      int pnum, int ec, const struct ubi_vid_hdr *vid_hdr,
-		      int bitflips)
+int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
+		  int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips)
 {
 	int err, vol_id, lnum;
 	unsigned long long sqnum;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb;
 	struct rb_node **p, *parent = NULL;
 
 	vol_id = be32_to_cpu(vid_hdr->vol_id);
@@ -461,25 +465,25 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 	dbg_bld("PEB %d, LEB %d:%d, EC %d, sqnum %llu, bitflips %d",
 		pnum, vol_id, lnum, ec, sqnum, bitflips);
 
-	sv = add_volume(si, vol_id, pnum, vid_hdr);
-	if (IS_ERR(sv))
-		return PTR_ERR(sv);
+	av = add_volume(ai, vol_id, pnum, vid_hdr);
+	if (IS_ERR(av))
+		return PTR_ERR(av);
 
-	if (si->max_sqnum < sqnum)
-		si->max_sqnum = sqnum;
+	if (ai->max_sqnum < sqnum)
+		ai->max_sqnum = sqnum;
 
 	/*
 	 * Walk the RB-tree of logical eraseblocks of volume @vol_id to look
 	 * if this is the first instance of this logical eraseblock or not.
 	 */
-	p = &sv->root.rb_node;
+	p = &av->root.rb_node;
 	while (*p) {
 		int cmp_res;
 
 		parent = *p;
-		seb = rb_entry(parent, struct ubi_scan_leb, u.rb);
-		if (lnum != seb->lnum) {
-			if (lnum < seb->lnum)
+		aeb = rb_entry(parent, struct ubi_ainf_peb, u.rb);
+		if (lnum != aeb->lnum) {
+			if (lnum < aeb->lnum)
 				p = &(*p)->rb_left;
 			else
 				p = &(*p)->rb_right;
@@ -491,8 +495,8 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 		 * logical eraseblock present.
 		 */
 
-		dbg_bld("this LEB already exists: PEB %d, sqnum %llu, "
-			"EC %d", seb->pnum, seb->sqnum, seb->ec);
+		dbg_bld("this LEB already exists: PEB %d, sqnum %llu, EC %d",
+			aeb->pnum, aeb->sqnum, aeb->ec);
 
 		/*
 		 * Make sure that the logical eraseblocks have different
@@ -507,11 +511,11 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 		 * images, but refuse attaching old images with duplicated
 		 * logical eraseblocks because there was an unclean reboot.
 		 */
-		if (seb->sqnum == sqnum && sqnum != 0) {
+		if (aeb->sqnum == sqnum && sqnum != 0) {
 			ubi_err("two LEBs with same sequence number %llu",
 				sqnum);
-			ubi_dbg_dump_seb(seb, 0);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
+			ubi_dump_aeb(aeb, 0);
+			ubi_dump_vid_hdr(vid_hdr);
 			return -EINVAL;
 		}
 
@@ -519,7 +523,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 		 * Now we have to drop the older one and preserve the newer
 		 * one.
 		 */
-		cmp_res = compare_lebs(ubi, seb, pnum, vid_hdr);
+		cmp_res = compare_lebs(ubi, aeb, pnum, vid_hdr);
 		if (cmp_res < 0)
 			return cmp_res;
 
@@ -528,23 +532,26 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 			 * This logical eraseblock is newer than the one
 			 * found earlier.
 			 */
-			err = validate_vid_hdr(vid_hdr, sv, pnum);
+			err = validate_vid_hdr(vid_hdr, av, pnum);
 			if (err)
 				return err;
 
-			err = add_to_list(si, seb->pnum, seb->ec, cmp_res & 4,
-					  &si->erase);
+			err = add_to_list(ai, aeb->pnum, aeb->vol_id,
+					  aeb->lnum, aeb->ec, cmp_res & 4,
+					  &ai->erase);
 			if (err)
 				return err;
 
-			seb->ec = ec;
-			seb->pnum = pnum;
-			seb->scrub = ((cmp_res & 2) || bitflips);
-			seb->copy_flag = vid_hdr->copy_flag;
-			seb->sqnum = sqnum;
+			aeb->ec = ec;
+			aeb->pnum = pnum;
+			aeb->vol_id = vol_id;
+			aeb->lnum = lnum;
+			aeb->scrub = ((cmp_res & 2) || bitflips);
+			aeb->copy_flag = vid_hdr->copy_flag;
+			aeb->sqnum = sqnum;
 
-			if (sv->highest_lnum == lnum)
-				sv->last_data_size =
+			if (av->highest_lnum == lnum)
+				av->last_data_size =
 					be32_to_cpu(vid_hdr->data_size);
 
 			return 0;
@@ -553,92 +560,64 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
 			 * This logical eraseblock is older than the one found
 			 * previously.
 			 */
-			return add_to_list(si, pnum, ec, cmp_res & 4,
-					   &si->erase);
+			return add_to_list(ai, pnum, vol_id, lnum, ec,
+					   cmp_res & 4, &ai->erase);
 		}
 	}
 
 	/*
 	 * We've met this logical eraseblock for the first time, add it to the
-	 * scanning information.
+	 * attaching information.
 	 */
 
-	err = validate_vid_hdr(vid_hdr, sv, pnum);
+	err = validate_vid_hdr(vid_hdr, av, pnum);
 	if (err)
 		return err;
 
-	seb = kmem_cache_alloc(si->scan_leb_slab, GFP_KERNEL);
-	if (!seb)
+	aeb = kmem_cache_alloc(ai->aeb_slab_cache, GFP_KERNEL);
+	if (!aeb)
 		return -ENOMEM;
 
-	seb->ec = ec;
-	seb->pnum = pnum;
-	seb->lnum = lnum;
-	seb->scrub = bitflips;
-	seb->copy_flag = vid_hdr->copy_flag;
-	seb->sqnum = sqnum;
-
-	if (sv->highest_lnum <= lnum) {
-		sv->highest_lnum = lnum;
-		sv->last_data_size = be32_to_cpu(vid_hdr->data_size);
+	aeb->ec = ec;
+	aeb->pnum = pnum;
+	aeb->vol_id = vol_id;
+	aeb->lnum = lnum;
+	aeb->scrub = bitflips;
+	aeb->copy_flag = vid_hdr->copy_flag;
+	aeb->sqnum = sqnum;
+
+	if (av->highest_lnum <= lnum) {
+		av->highest_lnum = lnum;
+		av->last_data_size = be32_to_cpu(vid_hdr->data_size);
 	}
 
-	sv->leb_count += 1;
-	rb_link_node(&seb->u.rb, parent, p);
-	rb_insert_color(&seb->u.rb, &sv->root);
+	av->leb_count += 1;
+	rb_link_node(&aeb->u.rb, parent, p);
+	rb_insert_color(&aeb->u.rb, &av->root);
 	return 0;
 }
 
 /**
- * ubi_scan_find_sv - find volume in the scanning information.
- * @si: scanning information
+ * ubi_find_av - find volume in the attaching information.
+ * @ai: attaching information
  * @vol_id: the requested volume ID
  *
  * This function returns a pointer to the volume description or %NULL if there
- * are no data about this volume in the scanning information.
- */
-struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
-					 int vol_id)
-{
-	struct ubi_scan_volume *sv;
-	struct rb_node *p = si->volumes.rb_node;
-
-	while (p) {
-		sv = rb_entry(p, struct ubi_scan_volume, rb);
-
-		if (vol_id == sv->vol_id)
-			return sv;
-
-		if (vol_id > sv->vol_id)
-			p = p->rb_left;
-		else
-			p = p->rb_right;
-	}
-
-	return NULL;
-}
-
-/**
- * ubi_scan_find_seb - find LEB in the volume scanning information.
- * @sv: a pointer to the volume scanning information
- * @lnum: the requested logical eraseblock
- *
- * This function returns a pointer to the scanning logical eraseblock or %NULL
- * if there are no data about it in the scanning volume information.
+ * are no data about this volume in the attaching information.
  */
-struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv,
-				       int lnum)
+struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
+				    int vol_id)
 {
-	struct ubi_scan_leb *seb;
-	struct rb_node *p = sv->root.rb_node;
+	struct ubi_ainf_volume *av;
+	struct rb_node *p = ai->volumes.rb_node;
 
 	while (p) {
-		seb = rb_entry(p, struct ubi_scan_leb, u.rb);
+		av = rb_entry(p, struct ubi_ainf_volume, rb);
 
-		if (lnum == seb->lnum)
-			return seb;
+		if (vol_id == av->vol_id)
+			return av;
 
-		if (lnum > seb->lnum)
+		if (vol_id > av->vol_id)
 			p = p->rb_left;
 		else
 			p = p->rb_right;
@@ -648,34 +627,34 @@ struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv,
 }
 
 /**
- * ubi_scan_rm_volume - delete scanning information about a volume.
- * @si: scanning information
- * @sv: the volume scanning information to delete
+ * ubi_remove_av - delete attaching information about a volume.
+ * @ai: attaching information
+ * @av: the volume attaching information to delete
  */
-void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv)
+void ubi_remove_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av)
 {
 	struct rb_node *rb;
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 
-	dbg_bld("remove scanning information about volume %d", sv->vol_id);
+	dbg_bld("remove attaching information about volume %d", av->vol_id);
 
-	while ((rb = rb_first(&sv->root))) {
-		seb = rb_entry(rb, struct ubi_scan_leb, u.rb);
-		rb_erase(&seb->u.rb, &sv->root);
-		list_add_tail(&seb->u.list, &si->erase);
+	while ((rb = rb_first(&av->root))) {
+		aeb = rb_entry(rb, struct ubi_ainf_peb, u.rb);
+		rb_erase(&aeb->u.rb, &av->root);
+		list_add_tail(&aeb->u.list, &ai->erase);
 	}
 
-	rb_erase(&sv->rb, &si->volumes);
-	kfree(sv);
-	si->vols_found -= 1;
+	rb_erase(&av->rb, &ai->volumes);
+	kfree(av);
+	ai->vols_found -= 1;
 }
 
 /**
- * ubi_scan_erase_peb - erase a physical eraseblock.
+ * early_erase_peb - erase a physical eraseblock.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  * @pnum: physical eraseblock number to erase;
- * @ec: erase counter value to write (%UBI_SCAN_UNKNOWN_EC if it is unknown)
+ * @ec: erase counter value to write (%UBI_UNKNOWN if it is unknown)
  *
  * This function erases physical eraseblock 'pnum', and writes the erase
  * counter header to it. This function should only be used on UBI device
@@ -683,8 +662,8 @@ void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv)
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
-		       int pnum, int ec)
+static int early_erase_peb(struct ubi_device *ubi,
+			   const struct ubi_attach_info *ai, int pnum, int ec)
 {
 	int err;
 	struct ubi_ec_hdr *ec_hdr;
@@ -716,9 +695,9 @@ out_free:
 }
 
 /**
- * ubi_scan_get_free_peb - get a free physical eraseblock.
+ * ubi_early_get_peb - get a free physical eraseblock.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function returns a free physical eraseblock. It is supposed to be
  * called on the UBI initialization stages when the wear-leveling sub-system is
@@ -726,20 +705,20 @@ out_free:
  * the lists, writes the EC header if it is needed, and removes it from the
  * list.
  *
- * This function returns scanning physical eraseblock information in case of
- * success and an error code in case of failure.
+ * This function returns a pointer to the "aeb" of the found free PEB in case
+ * of success and an error code in case of failure.
  */
-struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
-					   struct ubi_scan_info *si)
+struct ubi_ainf_peb *ubi_early_get_peb(struct ubi_device *ubi,
+				       struct ubi_attach_info *ai)
 {
 	int err = 0;
-	struct ubi_scan_leb *seb, *tmp_seb;
+	struct ubi_ainf_peb *aeb, *tmp_aeb;
 
-	if (!list_empty(&si->free)) {
-		seb = list_entry(si->free.next, struct ubi_scan_leb, u.list);
-		list_del(&seb->u.list);
-		dbg_bld("return free PEB %d, EC %d", seb->pnum, seb->ec);
-		return seb;
+	if (!list_empty(&ai->free)) {
+		aeb = list_entry(ai->free.next, struct ubi_ainf_peb, u.list);
+		list_del(&aeb->u.list);
+		dbg_bld("return free PEB %d, EC %d", aeb->pnum, aeb->ec);
+		return aeb;
 	}
 
 	/*
@@ -748,18 +727,18 @@ struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
 	 * so forth. We don't want to take care about bad eraseblocks here -
 	 * they'll be handled later.
 	 */
-	list_for_each_entry_safe(seb, tmp_seb, &si->erase, u.list) {
-		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-			seb->ec = si->mean_ec;
+	list_for_each_entry_safe(aeb, tmp_aeb, &ai->erase, u.list) {
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
 
-		err = ubi_scan_erase_peb(ubi, si, seb->pnum, seb->ec+1);
+		err = early_erase_peb(ubi, ai, aeb->pnum, aeb->ec+1);
 		if (err)
 			continue;
 
-		seb->ec += 1;
-		list_del(&seb->u.list);
-		dbg_bld("return PEB %d, EC %d", seb->pnum, seb->ec);
-		return seb;
+		aeb->ec += 1;
+		list_del(&aeb->u.list);
+		dbg_bld("return PEB %d, EC %d", aeb->pnum, aeb->ec);
+		return aeb;
 	}
 
 	ubi_err("no free eraseblocks");
@@ -814,7 +793,7 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
 	ubi_err("PEB %d contains corrupted VID header, and the data does not "
 		"contain all 0xFF, this may be a non-UBI PEB or a severe VID "
 		"header corruption which requires manual inspection", pnum);
-	ubi_dbg_dump_vid_hdr(vid_hdr);
+	ubi_dump_vid_hdr(vid_hdr);
 	dbg_msg("hexdump of PEB %d offset %d, length %d",
 		pnum, ubi->leb_start, ubi->leb_size);
 	ubi_dbg_print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
@@ -827,16 +806,18 @@ out_unlock:
 }
 
 /**
- * process_eb - read, check UBI headers, and add them to scanning information.
+ * scan_peb - scan and process UBI headers of a PEB.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  * @pnum: the physical eraseblock number
  *
- * This function returns a zero if the physical eraseblock was successfully
- * handled and a negative error code in case of failure.
+ * This function reads UBI headers of PEB @pnum, checks them, and adds
+ * information about this PEB to the corresponding list or RB-tree in the
+ * "attaching info" structure. Returns zero if the physical eraseblock was
+ * successfully handled and a negative error code in case of failure.
  */
-static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
-		      int pnum)
+static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
+		    int pnum)
 {
 	long long uninitialized_var(ec);
 	int err, bitflips = 0, vol_id, ec_err = 0;
@@ -848,12 +829,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 	if (err < 0)
 		return err;
 	else if (err) {
-		/*
-		 * FIXME: this is actually duty of the I/O sub-system to
-		 * initialize this, but MTD does not provide enough
-		 * information.
-		 */
-		si->bad_peb_count += 1;
+		ai->bad_peb_count += 1;
 		return 0;
 	}
 
@@ -867,13 +843,13 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 		bitflips = 1;
 		break;
 	case UBI_IO_FF:
-		si->empty_peb_count += 1;
-		return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, 0,
-				   &si->erase);
+		ai->empty_peb_count += 1;
+		return add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN,
+				   UBI_UNKNOWN, 0, &ai->erase);
 	case UBI_IO_FF_BITFLIPS:
-		si->empty_peb_count += 1;
-		return add_to_list(si, pnum, UBI_SCAN_UNKNOWN_EC, 1,
-				   &si->erase);
+		ai->empty_peb_count += 1;
+		return add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN,
+				   UBI_UNKNOWN, 1, &ai->erase);
 	case UBI_IO_BAD_HDR_EBADMSG:
 	case UBI_IO_BAD_HDR:
 		/*
@@ -882,7 +858,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 		 * moved and EC be re-created.
 		 */
 		ec_err = err;
-		ec = UBI_SCAN_UNKNOWN_EC;
+		ec = UBI_UNKNOWN;
 		bitflips = 1;
 		break;
 	default:
@@ -911,7 +887,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 			 */
 			ubi_err("erase counter overflow, max is %d",
 				UBI_MAX_ERASECOUNTER);
-			ubi_dbg_dump_ec_hdr(ech);
+			ubi_dump_ec_hdr(ech);
 			return -EINVAL;
 		}
 
@@ -933,7 +909,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 		    ubi->image_seq != image_seq) {
 			ubi_err("bad image sequence number %d in PEB %d, "
 				"expected %d", image_seq, pnum, ubi->image_seq);
-			ubi_dbg_dump_ec_hdr(ech);
+			ubi_dump_ec_hdr(ech);
 			return -EINVAL;
 		}
 	}
@@ -957,7 +933,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 			 * PEB, bit it is not marked as bad yet. This may also
 			 * be a result of power cut during erasure.
 			 */
-			si->maybe_bad_peb_count += 1;
+			ai->maybe_bad_peb_count += 1;
 	case UBI_IO_BAD_HDR:
 		if (ec_err)
 			/*
@@ -984,23 +960,27 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 			return err;
 		else if (!err)
 			/* This corruption is caused by a power cut */
-			err = add_to_list(si, pnum, ec, 1, &si->erase);
+			err = add_to_list(ai, pnum, UBI_UNKNOWN,
+					  UBI_UNKNOWN, ec, 1, &ai->erase);
 		else
 			/* This is an unexpected corruption */
-			err = add_corrupted(si, pnum, ec);
+			err = add_corrupted(ai, pnum, ec);
 		if (err)
 			return err;
 		goto adjust_mean_ec;
 	case UBI_IO_FF_BITFLIPS:
-		err = add_to_list(si, pnum, ec, 1, &si->erase);
+		err = add_to_list(ai, pnum, UBI_UNKNOWN, UBI_UNKNOWN,
+				  ec, 1, &ai->erase);
 		if (err)
 			return err;
 		goto adjust_mean_ec;
 	case UBI_IO_FF:
 		if (ec_err)
-			err = add_to_list(si, pnum, ec, 1, &si->erase);
+			err = add_to_list(ai, pnum, UBI_UNKNOWN,
+					  UBI_UNKNOWN, ec, 1, &ai->erase);
 		else
-			err = add_to_list(si, pnum, ec, 0, &si->free);
+			err = add_to_list(ai, pnum, UBI_UNKNOWN,
+					  UBI_UNKNOWN, ec, 0, &ai->free);
 		if (err)
 			return err;
 		goto adjust_mean_ec;
@@ -1019,7 +999,8 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 		case UBI_COMPAT_DELETE:
 			ubi_msg("\"delete\" compatible internal volume %d:%d"
 				" found, will remove it", vol_id, lnum);
-			err = add_to_list(si, pnum, ec, 1, &si->erase);
+			err = add_to_list(ai, pnum, vol_id, lnum,
+					  ec, 1, &ai->erase);
 			if (err)
 				return err;
 			return 0;
@@ -1034,7 +1015,8 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 		case UBI_COMPAT_PRESERVE:
 			ubi_msg("\"preserve\" compatible internal volume %d:%d"
 				" found", vol_id, lnum);
-			err = add_to_list(si, pnum, ec, 0, &si->alien);
+			err = add_to_list(ai, pnum, vol_id, lnum,
+					  ec, 0, &ai->alien);
 			if (err)
 				return err;
 			return 0;
@@ -1049,40 +1031,40 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 	if (ec_err)
 		ubi_warn("valid VID header but corrupted EC header at PEB %d",
 			 pnum);
-	err = ubi_scan_add_used(ubi, si, pnum, ec, vidh, bitflips);
+	err = ubi_add_to_av(ubi, ai, pnum, ec, vidh, bitflips);
 	if (err)
 		return err;
 
 adjust_mean_ec:
 	if (!ec_err) {
-		si->ec_sum += ec;
-		si->ec_count += 1;
-		if (ec > si->max_ec)
-			si->max_ec = ec;
-		if (ec < si->min_ec)
-			si->min_ec = ec;
+		ai->ec_sum += ec;
+		ai->ec_count += 1;
+		if (ec > ai->max_ec)
+			ai->max_ec = ec;
+		if (ec < ai->min_ec)
+			ai->min_ec = ec;
 	}
 
 	return 0;
 }
 
 /**
- * check_what_we_have - check what PEB were found by scanning.
+ * late_analysis - analyze the overall situation with PEB.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
- * This is a helper function which takes a look what PEBs were found by
- * scanning, and decides whether the flash is empty and should be formatted and
- * whether there are too many corrupted PEBs and we should not attach this
- * MTD device. Returns zero if we should proceed with attaching the MTD device,
- * and %-EINVAL if we should not.
+ * This is a helper function which takes a look what PEBs we have after we
+ * gather information about all of them ("ai" is compete). It decides whether
+ * the flash is empty and should be formatted of whether there are too many
+ * corrupted PEBs and we should not attach this MTD device. Returns zero if we
+ * should proceed with attaching the MTD device, and %-EINVAL if we should not.
  */
-static int check_what_we_have(struct ubi_device *ubi, struct ubi_scan_info *si)
+static int late_analysis(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 	int max_corr, peb_count;
 
-	peb_count = ubi->peb_count - si->bad_peb_count - si->alien_peb_count;
+	peb_count = ubi->peb_count - ai->bad_peb_count - ai->alien_peb_count;
 	max_corr = peb_count / 20 ?: 8;
 
 	/*
@@ -1090,25 +1072,25 @@ static int check_what_we_have(struct ubi_device *ubi, struct ubi_scan_info *si)
 	 * unclean reboots. However, many of them may indicate some problems
 	 * with the flash HW or driver.
 	 */
-	if (si->corr_peb_count) {
+	if (ai->corr_peb_count) {
 		ubi_err("%d PEBs are corrupted and preserved",
-			si->corr_peb_count);
+			ai->corr_peb_count);
 		printk(KERN_ERR "Corrupted PEBs are:");
-		list_for_each_entry(seb, &si->corr, u.list)
-			printk(KERN_CONT " %d", seb->pnum);
+		list_for_each_entry(aeb, &ai->corr, u.list)
+			printk(KERN_CONT " %d", aeb->pnum);
 		printk(KERN_CONT "\n");
 
 		/*
 		 * If too many PEBs are corrupted, we refuse attaching,
 		 * otherwise, only print a warning.
 		 */
-		if (si->corr_peb_count >= max_corr) {
+		if (ai->corr_peb_count >= max_corr) {
 			ubi_err("too many corrupted PEBs, refusing");
 			return -EINVAL;
 		}
 	}
 
-	if (si->empty_peb_count + si->maybe_bad_peb_count == peb_count) {
+	if (ai->empty_peb_count + ai->maybe_bad_peb_count == peb_count) {
 		/*
 		 * All PEBs are empty, or almost all - a couple PEBs look like
 		 * they may be bad PEBs which were not marked as bad yet.
@@ -1124,8 +1106,8 @@ static int check_what_we_have(struct ubi_device *ubi, struct ubi_scan_info *si)
 		 * 2. Flash contains non-UBI data and we do not want to format
 		 *    it and destroy possibly important information.
 		 */
-		if (si->maybe_bad_peb_count <= 2) {
-			si->is_empty = 1;
+		if (ai->maybe_bad_peb_count <= 2) {
+			ai->is_empty = 1;
 			ubi_msg("empty MTD device detected");
 			get_random_bytes(&ubi->image_seq,
 					 sizeof(ubi->image_seq));
@@ -1141,40 +1123,41 @@ static int check_what_we_have(struct ubi_device *ubi, struct ubi_scan_info *si)
 }
 
 /**
- * ubi_scan - scan an MTD device.
+ * scan_all - scan entire MTD device.
  * @ubi: UBI device description object
  *
  * This function does full scanning of an MTD device and returns complete
- * information about it. In case of failure, an error code is returned.
+ * information about it in form of a "struct ubi_attach_info" object. In case
+ * of failure, an error code is returned.
  */
-struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
+static struct ubi_attach_info *scan_all(struct ubi_device *ubi)
 {
 	int err, pnum;
 	struct rb_node *rb1, *rb2;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb;
-	struct ubi_scan_info *si;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb;
+	struct ubi_attach_info *ai;
 
-	si = kzalloc(sizeof(struct ubi_scan_info), GFP_KERNEL);
-	if (!si)
+	ai = kzalloc(sizeof(struct ubi_attach_info), GFP_KERNEL);
+	if (!ai)
 		return ERR_PTR(-ENOMEM);
 
-	INIT_LIST_HEAD(&si->corr);
-	INIT_LIST_HEAD(&si->free);
-	INIT_LIST_HEAD(&si->erase);
-	INIT_LIST_HEAD(&si->alien);
-	si->volumes = RB_ROOT;
+	INIT_LIST_HEAD(&ai->corr);
+	INIT_LIST_HEAD(&ai->free);
+	INIT_LIST_HEAD(&ai->erase);
+	INIT_LIST_HEAD(&ai->alien);
+	ai->volumes = RB_ROOT;
 
 	err = -ENOMEM;
-	si->scan_leb_slab = kmem_cache_create("ubi_scan_leb_slab",
-					      sizeof(struct ubi_scan_leb),
-					      0, 0, NULL);
-	if (!si->scan_leb_slab)
-		goto out_si;
+	ai->aeb_slab_cache = kmem_cache_create("ubi_aeb_slab_cache",
+					       sizeof(struct ubi_ainf_peb),
+					       0, 0, NULL);
+	if (!ai->aeb_slab_cache)
+		goto out_ai;
 
 	ech = kzalloc(ubi->ec_hdr_alsize, GFP_KERNEL);
 	if (!ech)
-		goto out_si;
+		goto out_ai;
 
 	vidh = ubi_zalloc_vid_hdr(ubi, GFP_KERNEL);
 	if (!vidh)
@@ -1184,7 +1167,7 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
 		cond_resched();
 
 		dbg_gen("process PEB %d", pnum);
-		err = process_eb(ubi, si, pnum);
+		err = scan_peb(ubi, ai, pnum);
 		if (err < 0)
 			goto out_vidh;
 	}
@@ -1192,10 +1175,10 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
 	dbg_msg("scanning is finished");
 
 	/* Calculate mean erase counter */
-	if (si->ec_count)
-		si->mean_ec = div_u64(si->ec_sum, si->ec_count);
+	if (ai->ec_count)
+		ai->mean_ec = div_u64(ai->ec_sum, ai->ec_count);
 
-	err = check_what_we_have(ubi, si);
+	err = late_analysis(ubi, ai);
 	if (err)
 		goto out_vidh;
 
@@ -1203,55 +1186,102 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi)
 	 * In case of unknown erase counter we use the mean erase counter
 	 * value.
 	 */
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb)
-			if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-				seb->ec = si->mean_ec;
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb)
+			if (aeb->ec == UBI_UNKNOWN)
+				aeb->ec = ai->mean_ec;
 	}
 
-	list_for_each_entry(seb, &si->free, u.list) {
-		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-			seb->ec = si->mean_ec;
+	list_for_each_entry(aeb, &ai->free, u.list) {
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
 	}
 
-	list_for_each_entry(seb, &si->corr, u.list)
-		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-			seb->ec = si->mean_ec;
+	list_for_each_entry(aeb, &ai->corr, u.list)
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
 
-	list_for_each_entry(seb, &si->erase, u.list)
-		if (seb->ec == UBI_SCAN_UNKNOWN_EC)
-			seb->ec = si->mean_ec;
+	list_for_each_entry(aeb, &ai->erase, u.list)
+		if (aeb->ec == UBI_UNKNOWN)
+			aeb->ec = ai->mean_ec;
 
-	err = paranoid_check_si(ubi, si);
+	err = self_check_ai(ubi, ai);
 	if (err)
 		goto out_vidh;
 
 	ubi_free_vid_hdr(ubi, vidh);
 	kfree(ech);
 
-	return si;
+	return ai;
 
 out_vidh:
 	ubi_free_vid_hdr(ubi, vidh);
 out_ech:
 	kfree(ech);
-out_si:
-	ubi_scan_destroy_si(si);
+out_ai:
+	ubi_destroy_ai(ai);
 	return ERR_PTR(err);
 }
 
 /**
- * destroy_sv - free the scanning volume information
- * @sv: scanning volume information
- * @si: scanning information
+ * ubi_attach - attach an MTD device.
+ * @ubi: UBI device descriptor
  *
- * This function destroys the volume RB-tree (@sv->root) and the scanning
- * volume information.
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
  */
-static void destroy_sv(struct ubi_scan_info *si, struct ubi_scan_volume *sv)
+int ubi_attach(struct ubi_device *ubi)
 {
-	struct ubi_scan_leb *seb;
-	struct rb_node *this = sv->root.rb_node;
+	int err;
+	struct ubi_attach_info *ai;
+
+	ai = scan_all(ubi);
+	if (IS_ERR(ai))
+		return PTR_ERR(ai);
+
+	ubi->bad_peb_count = ai->bad_peb_count;
+	ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count;
+	ubi->corr_peb_count = ai->corr_peb_count;
+	ubi->max_ec = ai->max_ec;
+	ubi->mean_ec = ai->mean_ec;
+	ubi_msg("max. sequence number:       %llu", ai->max_sqnum);
+
+	err = ubi_read_volume_table(ubi, ai);
+	if (err)
+		goto out_ai;
+
+	err = ubi_wl_init(ubi, ai);
+	if (err)
+		goto out_vtbl;
+
+	err = ubi_eba_init(ubi, ai);
+	if (err)
+		goto out_wl;
+
+	ubi_destroy_ai(ai);
+	return 0;
+
+out_wl:
+	ubi_wl_close(ubi);
+out_vtbl:
+	ubi_free_internal_volumes(ubi);
+	vfree(ubi->vtbl);
+out_ai:
+	ubi_destroy_ai(ai);
+	return err;
+}
+
+/**
+ * destroy_av - free volume attaching information.
+ * @av: volume attaching information
+ * @ai: attaching information
+ *
+ * This function destroys the volume attaching information.
+ */
+static void destroy_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av)
+{
+	struct ubi_ainf_peb *aeb;
+	struct rb_node *this = av->root.rb_node;
 
 	while (this) {
 		if (this->rb_left)
@@ -1259,224 +1289,222 @@ static void destroy_sv(struct ubi_scan_info *si, struct ubi_scan_volume *sv)
 		else if (this->rb_right)
 			this = this->rb_right;
 		else {
-			seb = rb_entry(this, struct ubi_scan_leb, u.rb);
+			aeb = rb_entry(this, struct ubi_ainf_peb, u.rb);
 			this = rb_parent(this);
 			if (this) {
-				if (this->rb_left == &seb->u.rb)
+				if (this->rb_left == &aeb->u.rb)
 					this->rb_left = NULL;
 				else
 					this->rb_right = NULL;
 			}
 
-			kmem_cache_free(si->scan_leb_slab, seb);
+			kmem_cache_free(ai->aeb_slab_cache, aeb);
 		}
 	}
-	kfree(sv);
+	kfree(av);
 }
 
 /**
- * ubi_scan_destroy_si - destroy scanning information.
- * @si: scanning information
+ * ubi_destroy_ai - destroy attaching information.
+ * @ai: attaching information
  */
-void ubi_scan_destroy_si(struct ubi_scan_info *si)
+void ubi_destroy_ai(struct ubi_attach_info *ai)
 {
-	struct ubi_scan_leb *seb, *seb_tmp;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_peb *aeb, *aeb_tmp;
+	struct ubi_ainf_volume *av;
 	struct rb_node *rb;
 
-	list_for_each_entry_safe(seb, seb_tmp, &si->alien, u.list) {
-		list_del(&seb->u.list);
-		kmem_cache_free(si->scan_leb_slab, seb);
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->alien, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
 	}
-	list_for_each_entry_safe(seb, seb_tmp, &si->erase, u.list) {
-		list_del(&seb->u.list);
-		kmem_cache_free(si->scan_leb_slab, seb);
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->erase, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
 	}
-	list_for_each_entry_safe(seb, seb_tmp, &si->corr, u.list) {
-		list_del(&seb->u.list);
-		kmem_cache_free(si->scan_leb_slab, seb);
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->corr, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
 	}
-	list_for_each_entry_safe(seb, seb_tmp, &si->free, u.list) {
-		list_del(&seb->u.list);
-		kmem_cache_free(si->scan_leb_slab, seb);
+	list_for_each_entry_safe(aeb, aeb_tmp, &ai->free, u.list) {
+		list_del(&aeb->u.list);
+		kmem_cache_free(ai->aeb_slab_cache, aeb);
 	}
 
 	/* Destroy the volume RB-tree */
-	rb = si->volumes.rb_node;
+	rb = ai->volumes.rb_node;
 	while (rb) {
 		if (rb->rb_left)
 			rb = rb->rb_left;
 		else if (rb->rb_right)
 			rb = rb->rb_right;
 		else {
-			sv = rb_entry(rb, struct ubi_scan_volume, rb);
+			av = rb_entry(rb, struct ubi_ainf_volume, rb);
 
 			rb = rb_parent(rb);
 			if (rb) {
-				if (rb->rb_left == &sv->rb)
+				if (rb->rb_left == &av->rb)
 					rb->rb_left = NULL;
 				else
 					rb->rb_right = NULL;
 			}
 
-			destroy_sv(si, sv);
+			destroy_av(ai, av);
 		}
 	}
 
-	if (si->scan_leb_slab)
-		kmem_cache_destroy(si->scan_leb_slab);
+	if (ai->aeb_slab_cache)
+		kmem_cache_destroy(ai->aeb_slab_cache);
 
-	kfree(si);
+	kfree(ai);
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-
 /**
- * paranoid_check_si - check the scanning information.
+ * self_check_ai - check the attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
- * This function returns zero if the scanning information is all right, and a
+ * This function returns zero if the attaching information is all right, and a
  * negative error code if not or if an error occurred.
  */
-static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
+static int self_check_ai(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
 	int pnum, err, vols_found = 0;
 	struct rb_node *rb1, *rb2;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb, *last_seb;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb, *last_aeb;
 	uint8_t *buf;
 
 	if (!ubi->dbg->chk_gen)
 		return 0;
 
 	/*
-	 * At first, check that scanning information is OK.
+	 * At first, check that attaching information is OK.
 	 */
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
 		int leb_count = 0;
 
 		cond_resched();
 
 		vols_found += 1;
 
-		if (si->is_empty) {
+		if (ai->is_empty) {
 			ubi_err("bad is_empty flag");
-			goto bad_sv;
+			goto bad_av;
 		}
 
-		if (sv->vol_id < 0 || sv->highest_lnum < 0 ||
-		    sv->leb_count < 0 || sv->vol_type < 0 || sv->used_ebs < 0 ||
-		    sv->data_pad < 0 || sv->last_data_size < 0) {
+		if (av->vol_id < 0 || av->highest_lnum < 0 ||
+		    av->leb_count < 0 || av->vol_type < 0 || av->used_ebs < 0 ||
+		    av->data_pad < 0 || av->last_data_size < 0) {
 			ubi_err("negative values");
-			goto bad_sv;
+			goto bad_av;
 		}
 
-		if (sv->vol_id >= UBI_MAX_VOLUMES &&
-		    sv->vol_id < UBI_INTERNAL_VOL_START) {
+		if (av->vol_id >= UBI_MAX_VOLUMES &&
+		    av->vol_id < UBI_INTERNAL_VOL_START) {
 			ubi_err("bad vol_id");
-			goto bad_sv;
+			goto bad_av;
 		}
 
-		if (sv->vol_id > si->highest_vol_id) {
+		if (av->vol_id > ai->highest_vol_id) {
 			ubi_err("highest_vol_id is %d, but vol_id %d is there",
-				si->highest_vol_id, sv->vol_id);
+				ai->highest_vol_id, av->vol_id);
 			goto out;
 		}
 
-		if (sv->vol_type != UBI_DYNAMIC_VOLUME &&
-		    sv->vol_type != UBI_STATIC_VOLUME) {
+		if (av->vol_type != UBI_DYNAMIC_VOLUME &&
+		    av->vol_type != UBI_STATIC_VOLUME) {
 			ubi_err("bad vol_type");
-			goto bad_sv;
+			goto bad_av;
 		}
 
-		if (sv->data_pad > ubi->leb_size / 2) {
+		if (av->data_pad > ubi->leb_size / 2) {
 			ubi_err("bad data_pad");
-			goto bad_sv;
+			goto bad_av;
 		}
 
-		last_seb = NULL;
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
+		last_aeb = NULL;
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) {
 			cond_resched();
 
-			last_seb = seb;
+			last_aeb = aeb;
 			leb_count += 1;
 
-			if (seb->pnum < 0 || seb->ec < 0) {
+			if (aeb->pnum < 0 || aeb->ec < 0) {
 				ubi_err("negative values");
-				goto bad_seb;
+				goto bad_aeb;
 			}
 
-			if (seb->ec < si->min_ec) {
-				ubi_err("bad si->min_ec (%d), %d found",
-					si->min_ec, seb->ec);
-				goto bad_seb;
+			if (aeb->ec < ai->min_ec) {
+				ubi_err("bad ai->min_ec (%d), %d found",
+					ai->min_ec, aeb->ec);
+				goto bad_aeb;
 			}
 
-			if (seb->ec > si->max_ec) {
-				ubi_err("bad si->max_ec (%d), %d found",
-					si->max_ec, seb->ec);
-				goto bad_seb;
+			if (aeb->ec > ai->max_ec) {
+				ubi_err("bad ai->max_ec (%d), %d found",
+					ai->max_ec, aeb->ec);
+				goto bad_aeb;
 			}
 
-			if (seb->pnum >= ubi->peb_count) {
+			if (aeb->pnum >= ubi->peb_count) {
 				ubi_err("too high PEB number %d, total PEBs %d",
-					seb->pnum, ubi->peb_count);
-				goto bad_seb;
+					aeb->pnum, ubi->peb_count);
+				goto bad_aeb;
 			}
 
-			if (sv->vol_type == UBI_STATIC_VOLUME) {
-				if (seb->lnum >= sv->used_ebs) {
+			if (av->vol_type == UBI_STATIC_VOLUME) {
+				if (aeb->lnum >= av->used_ebs) {
 					ubi_err("bad lnum or used_ebs");
-					goto bad_seb;
+					goto bad_aeb;
 				}
 			} else {
-				if (sv->used_ebs != 0) {
+				if (av->used_ebs != 0) {
 					ubi_err("non-zero used_ebs");
-					goto bad_seb;
+					goto bad_aeb;
 				}
 			}
 
-			if (seb->lnum > sv->highest_lnum) {
+			if (aeb->lnum > av->highest_lnum) {
 				ubi_err("incorrect highest_lnum or lnum");
-				goto bad_seb;
+				goto bad_aeb;
 			}
 		}
 
-		if (sv->leb_count != leb_count) {
+		if (av->leb_count != leb_count) {
 			ubi_err("bad leb_count, %d objects in the tree",
 				leb_count);
-			goto bad_sv;
+			goto bad_av;
 		}
 
-		if (!last_seb)
+		if (!last_aeb)
 			continue;
 
-		seb = last_seb;
+		aeb = last_aeb;
 
-		if (seb->lnum != sv->highest_lnum) {
+		if (aeb->lnum != av->highest_lnum) {
 			ubi_err("bad highest_lnum");
-			goto bad_seb;
+			goto bad_aeb;
 		}
 	}
 
-	if (vols_found != si->vols_found) {
-		ubi_err("bad si->vols_found %d, should be %d",
-			si->vols_found, vols_found);
+	if (vols_found != ai->vols_found) {
+		ubi_err("bad ai->vols_found %d, should be %d",
+			ai->vols_found, vols_found);
 		goto out;
 	}
 
-	/* Check that scanning information is correct */
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		last_seb = NULL;
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
+	/* Check that attaching information is correct */
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		last_aeb = NULL;
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) {
 			int vol_type;
 
 			cond_resched();
 
-			last_seb = seb;
+			last_aeb = aeb;
 
-			err = ubi_io_read_vid_hdr(ubi, seb->pnum, vidh, 1);
+			err = ubi_io_read_vid_hdr(ubi, aeb->pnum, vidh, 1);
 			if (err && err != UBI_IO_BITFLIPS) {
 				ubi_err("VID header is not OK (%d)", err);
 				if (err > 0)
@@ -1486,52 +1514,52 @@ static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
 
 			vol_type = vidh->vol_type == UBI_VID_DYNAMIC ?
 				   UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
-			if (sv->vol_type != vol_type) {
+			if (av->vol_type != vol_type) {
 				ubi_err("bad vol_type");
 				goto bad_vid_hdr;
 			}
 
-			if (seb->sqnum != be64_to_cpu(vidh->sqnum)) {
-				ubi_err("bad sqnum %llu", seb->sqnum);
+			if (aeb->sqnum != be64_to_cpu(vidh->sqnum)) {
+				ubi_err("bad sqnum %llu", aeb->sqnum);
 				goto bad_vid_hdr;
 			}
 
-			if (sv->vol_id != be32_to_cpu(vidh->vol_id)) {
-				ubi_err("bad vol_id %d", sv->vol_id);
+			if (av->vol_id != be32_to_cpu(vidh->vol_id)) {
+				ubi_err("bad vol_id %d", av->vol_id);
 				goto bad_vid_hdr;
 			}
 
-			if (sv->compat != vidh->compat) {
+			if (av->compat != vidh->compat) {
 				ubi_err("bad compat %d", vidh->compat);
 				goto bad_vid_hdr;
 			}
 
-			if (seb->lnum != be32_to_cpu(vidh->lnum)) {
-				ubi_err("bad lnum %d", seb->lnum);
+			if (aeb->lnum != be32_to_cpu(vidh->lnum)) {
+				ubi_err("bad lnum %d", aeb->lnum);
 				goto bad_vid_hdr;
 			}
 
-			if (sv->used_ebs != be32_to_cpu(vidh->used_ebs)) {
-				ubi_err("bad used_ebs %d", sv->used_ebs);
+			if (av->used_ebs != be32_to_cpu(vidh->used_ebs)) {
+				ubi_err("bad used_ebs %d", av->used_ebs);
 				goto bad_vid_hdr;
 			}
 
-			if (sv->data_pad != be32_to_cpu(vidh->data_pad)) {
-				ubi_err("bad data_pad %d", sv->data_pad);
+			if (av->data_pad != be32_to_cpu(vidh->data_pad)) {
+				ubi_err("bad data_pad %d", av->data_pad);
 				goto bad_vid_hdr;
 			}
 		}
 
-		if (!last_seb)
+		if (!last_aeb)
 			continue;
 
-		if (sv->highest_lnum != be32_to_cpu(vidh->lnum)) {
-			ubi_err("bad highest_lnum %d", sv->highest_lnum);
+		if (av->highest_lnum != be32_to_cpu(vidh->lnum)) {
+			ubi_err("bad highest_lnum %d", av->highest_lnum);
 			goto bad_vid_hdr;
 		}
 
-		if (sv->last_data_size != be32_to_cpu(vidh->data_size)) {
-			ubi_err("bad last_data_size %d", sv->last_data_size);
+		if (av->last_data_size != be32_to_cpu(vidh->data_size)) {
+			ubi_err("bad last_data_size %d", av->last_data_size);
 			goto bad_vid_hdr;
 		}
 	}
@@ -1553,21 +1581,21 @@ static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
 			buf[pnum] = 1;
 	}
 
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb)
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb)
-			buf[seb->pnum] = 1;
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb)
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb)
+			buf[aeb->pnum] = 1;
 
-	list_for_each_entry(seb, &si->free, u.list)
-		buf[seb->pnum] = 1;
+	list_for_each_entry(aeb, &ai->free, u.list)
+		buf[aeb->pnum] = 1;
 
-	list_for_each_entry(seb, &si->corr, u.list)
-		buf[seb->pnum] = 1;
+	list_for_each_entry(aeb, &ai->corr, u.list)
+		buf[aeb->pnum] = 1;
 
-	list_for_each_entry(seb, &si->erase, u.list)
-		buf[seb->pnum] = 1;
+	list_for_each_entry(aeb, &ai->erase, u.list)
+		buf[aeb->pnum] = 1;
 
-	list_for_each_entry(seb, &si->alien, u.list)
-		buf[seb->pnum] = 1;
+	list_for_each_entry(aeb, &ai->alien, u.list)
+		buf[aeb->pnum] = 1;
 
 	err = 0;
 	for (pnum = 0; pnum < ubi->peb_count; pnum++)
@@ -1581,25 +1609,23 @@ static int paranoid_check_si(struct ubi_device *ubi, struct ubi_scan_info *si)
 		goto out;
 	return 0;
 
-bad_seb:
-	ubi_err("bad scanning information about LEB %d", seb->lnum);
-	ubi_dbg_dump_seb(seb, 0);
-	ubi_dbg_dump_sv(sv);
+bad_aeb:
+	ubi_err("bad attaching information about LEB %d", aeb->lnum);
+	ubi_dump_aeb(aeb, 0);
+	ubi_dump_av(av);
 	goto out;
 
-bad_sv:
-	ubi_err("bad scanning information about volume %d", sv->vol_id);
-	ubi_dbg_dump_sv(sv);
+bad_av:
+	ubi_err("bad attaching information about volume %d", av->vol_id);
+	ubi_dump_av(av);
 	goto out;
 
 bad_vid_hdr:
-	ubi_err("bad scanning information about volume %d", sv->vol_id);
-	ubi_dbg_dump_sv(sv);
-	ubi_dbg_dump_vid_hdr(vidh);
+	ubi_err("bad attaching information about volume %d", av->vol_id);
+	ubi_dump_av(av);
+	ubi_dump_vid_hdr(vidh);
 
 out:
-	ubi_dbg_dump_stack();
+	dump_stack();
 	return -EINVAL;
 }
-
-#endif /* CONFIG_MTD_UBI_DEBUG */
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 0fde9fc7d2e5..2c5ed5ca9c33 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -27,10 +27,6 @@
  * module load parameters or the kernel boot parameters. If MTD devices were
  * specified, UBI does not attach any MTD device, but it is possible to do
  * later using the "UBI control device".
- *
- * At the moment we only attach UBI devices by scanning, which will become a
- * bottleneck when flashes reach certain large size. Then one may improve UBI
- * and add other methods, although it does not seem to be easy to do.
  */
 
 #include <linux/err.h>
@@ -554,10 +550,10 @@ static void uif_close(struct ubi_device *ubi)
 }
 
 /**
- * free_internal_volumes - free internal volumes.
+ * ubi_free_internal_volumes - free internal volumes.
  * @ubi: UBI device description object
  */
-static void free_internal_volumes(struct ubi_device *ubi)
+void ubi_free_internal_volumes(struct ubi_device *ubi)
 {
 	int i;
 
@@ -569,59 +565,6 @@ static void free_internal_volumes(struct ubi_device *ubi)
 }
 
 /**
- * attach_by_scanning - attach an MTD device using scanning method.
- * @ubi: UBI device descriptor
- *
- * This function returns zero in case of success and a negative error code in
- * case of failure.
- *
- * Note, currently this is the only method to attach UBI devices. Hopefully in
- * the future we'll have more scalable attaching methods and avoid full media
- * scanning. But even in this case scanning will be needed as a fall-back
- * attaching method if there are some on-flash table corruptions.
- */
-static int attach_by_scanning(struct ubi_device *ubi)
-{
-	int err;
-	struct ubi_scan_info *si;
-
-	si = ubi_scan(ubi);
-	if (IS_ERR(si))
-		return PTR_ERR(si);
-
-	ubi->bad_peb_count = si->bad_peb_count;
-	ubi->good_peb_count = ubi->peb_count - ubi->bad_peb_count;
-	ubi->corr_peb_count = si->corr_peb_count;
-	ubi->max_ec = si->max_ec;
-	ubi->mean_ec = si->mean_ec;
-	ubi_msg("max. sequence number:       %llu", si->max_sqnum);
-
-	err = ubi_read_volume_table(ubi, si);
-	if (err)
-		goto out_si;
-
-	err = ubi_wl_init_scan(ubi, si);
-	if (err)
-		goto out_vtbl;
-
-	err = ubi_eba_init_scan(ubi, si);
-	if (err)
-		goto out_wl;
-
-	ubi_scan_destroy_si(si);
-	return 0;
-
-out_wl:
-	ubi_wl_close(ubi);
-out_vtbl:
-	free_internal_volumes(ubi);
-	vfree(ubi->vtbl);
-out_si:
-	ubi_scan_destroy_si(si);
-	return err;
-}
-
-/**
  * io_init - initialize I/O sub-system for a given UBI device.
  * @ubi: UBI device description object
  *
@@ -790,11 +733,11 @@ static int io_init(struct ubi_device *ubi)
 	ubi_msg("data offset:                %d", ubi->leb_start);
 
 	/*
-	 * Note, ideally, we have to initialize ubi->bad_peb_count here. But
+	 * Note, ideally, we have to initialize @ubi->bad_peb_count here. But
 	 * unfortunately, MTD does not provide this information. We should loop
 	 * over all physical eraseblocks and invoke mtd->block_is_bad() for
-	 * each physical eraseblock. So, we skip ubi->bad_peb_count
-	 * uninitialized and initialize it after scanning.
+	 * each physical eraseblock. So, we leave @ubi->bad_peb_count
+	 * uninitialized so far.
 	 */
 
 	return 0;
@@ -805,7 +748,7 @@ static int io_init(struct ubi_device *ubi)
  * @ubi: UBI device description object
  * @vol_id: ID of the volume to re-size
  *
- * This function re-sizes the volume marked by the @UBI_VTBL_AUTORESIZE_FLG in
+ * This function re-sizes the volume marked by the %UBI_VTBL_AUTORESIZE_FLG in
  * the volume table to the largest possible size. See comments in ubi-header.h
  * for more description of the flag. Returns zero in case of success and a
  * negative error code in case of failure.
@@ -881,7 +824,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	for (i = 0; i < UBI_MAX_DEVICES; i++) {
 		ubi = ubi_devices[i];
 		if (ubi && mtd->index == ubi->mtd->index) {
-			dbg_err("mtd%d is already attached to ubi%d",
+			ubi_err("mtd%d is already attached to ubi%d",
 				mtd->index, i);
 			return -EEXIST;
 		}
@@ -907,7 +850,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 			if (!ubi_devices[ubi_num])
 				break;
 		if (ubi_num == UBI_MAX_DEVICES) {
-			dbg_err("only %d UBI devices may be created",
+			ubi_err("only %d UBI devices may be created",
 				UBI_MAX_DEVICES);
 			return -ENFILE;
 		}
@@ -917,7 +860,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 
 		/* Make sure ubi_num is not busy */
 		if (ubi_devices[ubi_num]) {
-			dbg_err("ubi%d already exists", ubi_num);
+			ubi_err("ubi%d already exists", ubi_num);
 			return -EEXIST;
 		}
 	}
@@ -937,7 +880,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	spin_lock_init(&ubi->volumes_lock);
 
 	ubi_msg("attaching mtd%d to ubi%d", mtd->index, ubi_num);
-	dbg_msg("sizeof(struct ubi_scan_leb) %zu", sizeof(struct ubi_scan_leb));
+	dbg_msg("sizeof(struct ubi_ainf_peb) %zu", sizeof(struct ubi_ainf_peb));
 	dbg_msg("sizeof(struct ubi_wl_entry) %zu", sizeof(struct ubi_wl_entry));
 
 	err = io_init(ubi);
@@ -953,9 +896,9 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset)
 	if (err)
 		goto out_free;
 
-	err = attach_by_scanning(ubi);
+	err = ubi_attach(ubi);
 	if (err) {
-		dbg_err("failed to attach by scanning, error %d", err);
+		ubi_err("failed to attach mtd%d, error %d", mtd->index, err);
 		goto out_debugging;
 	}
 
@@ -1020,7 +963,7 @@ out_uif:
 	uif_close(ubi);
 out_detach:
 	ubi_wl_close(ubi);
-	free_internal_volumes(ubi);
+	ubi_free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 out_debugging:
 	ubi_debugging_exit_dev(ubi);
@@ -1092,7 +1035,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway)
 	ubi_debugfs_exit_dev(ubi);
 	uif_close(ubi);
 	ubi_wl_close(ubi);
-	free_internal_volumes(ubi);
+	ubi_free_internal_volumes(ubi);
 	vfree(ubi->vtbl);
 	put_mtd_device(ubi->mtd);
 	ubi_debugging_exit_dev(ubi);
diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c
index ad76592fb2f4..acec85deb6af 100644
--- a/drivers/mtd/ubi/cdev.c
+++ b/drivers/mtd/ubi/cdev.c
@@ -63,7 +63,7 @@ static int get_exclusive(struct ubi_volume_desc *desc)
 	users = vol->readers + vol->writers + vol->exclusive;
 	ubi_assert(users > 0);
 	if (users > 1) {
-		dbg_err("%d users for volume %d", users, vol->vol_id);
+		ubi_err("%d users for volume %d", users, vol->vol_id);
 		err = -EBUSY;
 	} else {
 		vol->readers = vol->writers = 0;
@@ -159,7 +159,7 @@ static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
 
 	if (vol->updating) {
 		/* Update is in progress, seeking is prohibited */
-		dbg_err("updating");
+		ubi_err("updating");
 		return -EBUSY;
 	}
 
@@ -178,7 +178,7 @@ static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
 	}
 
 	if (new_offset < 0 || new_offset > vol->used_bytes) {
-		dbg_err("bad seek %lld", new_offset);
+		ubi_err("bad seek %lld", new_offset);
 		return -EINVAL;
 	}
 
@@ -216,11 +216,11 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
 		count, *offp, vol->vol_id);
 
 	if (vol->updating) {
-		dbg_err("updating");
+		ubi_err("updating");
 		return -EBUSY;
 	}
 	if (vol->upd_marker) {
-		dbg_err("damaged volume, update marker is set");
+		ubi_err("damaged volume, update marker is set");
 		return -EBADF;
 	}
 	if (*offp == vol->used_bytes || count == 0)
@@ -300,7 +300,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 
 	lnum = div_u64_rem(*offp, vol->usable_leb_size, &off);
 	if (off & (ubi->min_io_size - 1)) {
-		dbg_err("unaligned position");
+		ubi_err("unaligned position");
 		return -EINVAL;
 	}
 
@@ -309,7 +309,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 
 	/* We can write only in fractions of the minimum I/O unit */
 	if (count & (ubi->min_io_size - 1)) {
-		dbg_err("unaligned write length");
+		ubi_err("unaligned write length");
 		return -EINVAL;
 	}
 
@@ -334,8 +334,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
 			break;
 		}
 
-		err = ubi_eba_write_leb(ubi, vol, lnum, tbuf, off, len,
-					UBI_UNKNOWN);
+		err = ubi_eba_write_leb(ubi, vol, lnum, tbuf, off, len);
 		if (err)
 			break;
 
@@ -477,9 +476,6 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 		if (req.lnum < 0 || req.lnum >= vol->reserved_pebs ||
 		    req.bytes < 0 || req.lnum >= vol->usable_leb_size)
 			break;
-		if (req.dtype != UBI_LONGTERM && req.dtype != UBI_SHORTTERM &&
-		    req.dtype != UBI_UNKNOWN)
-			break;
 
 		err = get_exclusive(desc);
 		if (err < 0)
@@ -518,7 +514,7 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 		if (err)
 			break;
 
-		err = ubi_wl_flush(ubi);
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
 		break;
 	}
 
@@ -532,7 +528,7 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd,
 			err = -EFAULT;
 			break;
 		}
-		err = ubi_leb_map(desc, req.lnum, req.dtype);
+		err = ubi_leb_map(desc, req.lnum);
 		break;
 	}
 
@@ -647,8 +643,8 @@ static int verify_mkvol_req(const struct ubi_device *ubi,
 	return 0;
 
 bad:
-	dbg_err("bad volume creation request");
-	ubi_dbg_dump_mkvol_req(req);
+	ubi_err("bad volume creation request");
+	ubi_dump_mkvol_req(req);
 	return err;
 }
 
@@ -713,12 +709,12 @@ static int rename_volumes(struct ubi_device *ubi,
 	for (i = 0; i < req->count - 1; i++) {
 		for (n = i + 1; n < req->count; n++) {
 			if (req->ents[i].vol_id == req->ents[n].vol_id) {
-				dbg_err("duplicated volume id %d",
+				ubi_err("duplicated volume id %d",
 					req->ents[i].vol_id);
 				return -EINVAL;
 			}
 			if (!strcmp(req->ents[i].name, req->ents[n].name)) {
-				dbg_err("duplicated volume name \"%s\"",
+				ubi_err("duplicated volume name \"%s\"",
 					req->ents[i].name);
 				return -EINVAL;
 			}
@@ -741,7 +737,7 @@ static int rename_volumes(struct ubi_device *ubi,
 		re->desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_EXCLUSIVE);
 		if (IS_ERR(re->desc)) {
 			err = PTR_ERR(re->desc);
-			dbg_err("cannot open volume %d, error %d", vol_id, err);
+			ubi_err("cannot open volume %d, error %d", vol_id, err);
 			kfree(re);
 			goto out_free;
 		}
@@ -800,7 +796,7 @@ static int rename_volumes(struct ubi_device *ubi,
 				continue;
 
 			/* The volume exists but busy, or an error occurred */
-			dbg_err("cannot open volume \"%s\", error %d",
+			ubi_err("cannot open volume \"%s\", error %d",
 				re->new_name, err);
 			goto out_free;
 		}
diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c
index 61af9bb560ab..9f957c2d48e9 100644
--- a/drivers/mtd/ubi/debug.c
+++ b/drivers/mtd/ubi/debug.c
@@ -18,24 +18,49 @@
  * Author: Artem Bityutskiy (Битюцкий Артём)
  */
 
-/*
- * Here we keep all the UBI debugging stuff which should normally be disabled
- * and compiled-out, but it is extremely helpful when hunting bugs or doing big
- * changes.
- */
-
-#ifdef CONFIG_MTD_UBI_DEBUG
-
 #include "ubi.h"
 #include <linux/debugfs.h>
 #include <linux/uaccess.h>
 #include <linux/module.h>
 
+
+/**
+ * ubi_dump_flash - dump a region of flash.
+ * @ubi: UBI device description object
+ * @pnum: the physical eraseblock number to dump
+ * @offset: the starting offset within the physical eraseblock to dump
+ * @len: the length of the region to dump
+ */
+void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
+{
+	int err;
+	size_t read;
+	void *buf;
+	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
+
+	buf = vmalloc(len);
+	if (!buf)
+		return;
+	err = mtd_read(ubi->mtd, addr, len, &read, buf);
+	if (err && err != -EUCLEAN) {
+		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
+			"read %zd bytes", err, len, pnum, offset, read);
+		goto out;
+	}
+
+	ubi_msg("dumping %d bytes of data from PEB %d, offset %d",
+		len, pnum, offset);
+	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
+out:
+	vfree(buf);
+	return;
+}
+
 /**
- * ubi_dbg_dump_ec_hdr - dump an erase counter header.
+ * ubi_dump_ec_hdr - dump an erase counter header.
  * @ec_hdr: the erase counter header to dump
  */
-void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
+void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
 {
 	printk(KERN_DEBUG "Erase counter header dump:\n");
 	printk(KERN_DEBUG "\tmagic          %#08x\n",
@@ -57,10 +82,10 @@ void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
 }
 
 /**
- * ubi_dbg_dump_vid_hdr - dump a volume identifier header.
+ * ubi_dump_vid_hdr - dump a volume identifier header.
  * @vid_hdr: the volume identifier header to dump
  */
-void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
+void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
 {
 	printk(KERN_DEBUG "Volume identifier header dump:\n");
 	printk(KERN_DEBUG "\tmagic     %08x\n", be32_to_cpu(vid_hdr->magic));
@@ -82,10 +107,10 @@ void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
 }
 
 /**
- * ubi_dbg_dump_vol_info- dump volume information.
+ * ubi_dump_vol_info - dump volume information.
  * @vol: UBI volume description object
  */
-void ubi_dbg_dump_vol_info(const struct ubi_volume *vol)
+void ubi_dump_vol_info(const struct ubi_volume *vol)
 {
 	printk(KERN_DEBUG "Volume information dump:\n");
 	printk(KERN_DEBUG "\tvol_id          %d\n", vol->vol_id);
@@ -112,11 +137,11 @@ void ubi_dbg_dump_vol_info(const struct ubi_volume *vol)
 }
 
 /**
- * ubi_dbg_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
+ * ubi_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
  * @r: the object to dump
  * @idx: volume table index
  */
-void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
+void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
 {
 	int name_len = be16_to_cpu(r->name_len);
 
@@ -146,44 +171,44 @@ void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
 }
 
 /**
- * ubi_dbg_dump_sv - dump a &struct ubi_scan_volume object.
- * @sv: the object to dump
+ * ubi_dump_av - dump a &struct ubi_ainf_volume object.
+ * @av: the object to dump
  */
-void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv)
+void ubi_dump_av(const struct ubi_ainf_volume *av)
 {
-	printk(KERN_DEBUG "Volume scanning information dump:\n");
-	printk(KERN_DEBUG "\tvol_id         %d\n", sv->vol_id);
-	printk(KERN_DEBUG "\thighest_lnum   %d\n", sv->highest_lnum);
-	printk(KERN_DEBUG "\tleb_count      %d\n", sv->leb_count);
-	printk(KERN_DEBUG "\tcompat         %d\n", sv->compat);
-	printk(KERN_DEBUG "\tvol_type       %d\n", sv->vol_type);
-	printk(KERN_DEBUG "\tused_ebs       %d\n", sv->used_ebs);
-	printk(KERN_DEBUG "\tlast_data_size %d\n", sv->last_data_size);
-	printk(KERN_DEBUG "\tdata_pad       %d\n", sv->data_pad);
+	printk(KERN_DEBUG "Volume attaching information dump:\n");
+	printk(KERN_DEBUG "\tvol_id         %d\n", av->vol_id);
+	printk(KERN_DEBUG "\thighest_lnum   %d\n", av->highest_lnum);
+	printk(KERN_DEBUG "\tleb_count      %d\n", av->leb_count);
+	printk(KERN_DEBUG "\tcompat         %d\n", av->compat);
+	printk(KERN_DEBUG "\tvol_type       %d\n", av->vol_type);
+	printk(KERN_DEBUG "\tused_ebs       %d\n", av->used_ebs);
+	printk(KERN_DEBUG "\tlast_data_size %d\n", av->last_data_size);
+	printk(KERN_DEBUG "\tdata_pad       %d\n", av->data_pad);
 }
 
 /**
- * ubi_dbg_dump_seb - dump a &struct ubi_scan_leb object.
- * @seb: the object to dump
+ * ubi_dump_aeb - dump a &struct ubi_ainf_peb object.
+ * @aeb: the object to dump
  * @type: object type: 0 - not corrupted, 1 - corrupted
  */
-void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type)
+void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type)
 {
-	printk(KERN_DEBUG "eraseblock scanning information dump:\n");
-	printk(KERN_DEBUG "\tec       %d\n", seb->ec);
-	printk(KERN_DEBUG "\tpnum     %d\n", seb->pnum);
+	printk(KERN_DEBUG "eraseblock attaching information dump:\n");
+	printk(KERN_DEBUG "\tec       %d\n", aeb->ec);
+	printk(KERN_DEBUG "\tpnum     %d\n", aeb->pnum);
 	if (type == 0) {
-		printk(KERN_DEBUG "\tlnum     %d\n", seb->lnum);
-		printk(KERN_DEBUG "\tscrub    %d\n", seb->scrub);
-		printk(KERN_DEBUG "\tsqnum    %llu\n", seb->sqnum);
+		printk(KERN_DEBUG "\tlnum     %d\n", aeb->lnum);
+		printk(KERN_DEBUG "\tscrub    %d\n", aeb->scrub);
+		printk(KERN_DEBUG "\tsqnum    %llu\n", aeb->sqnum);
 	}
 }
 
 /**
- * ubi_dbg_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
+ * ubi_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
  * @req: the object to dump
  */
-void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)
+void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req)
 {
 	char nm[17];
 
@@ -200,38 +225,6 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)
 }
 
 /**
- * ubi_dbg_dump_flash - dump a region of flash.
- * @ubi: UBI device description object
- * @pnum: the physical eraseblock number to dump
- * @offset: the starting offset within the physical eraseblock to dump
- * @len: the length of the region to dump
- */
-void ubi_dbg_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len)
-{
-	int err;
-	size_t read;
-	void *buf;
-	loff_t addr = (loff_t)pnum * ubi->peb_size + offset;
-
-	buf = vmalloc(len);
-	if (!buf)
-		return;
-	err = mtd_read(ubi->mtd, addr, len, &read, buf);
-	if (err && err != -EUCLEAN) {
-		ubi_err("error %d while reading %d bytes from PEB %d:%d, "
-			"read %zd bytes", err, len, pnum, offset, read);
-		goto out;
-	}
-
-	dbg_msg("dumping %d bytes of data from PEB %d, offset %d",
-		len, pnum, offset);
-	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
-out:
-	vfree(buf);
-	return;
-}
-
-/**
  * ubi_debugging_init_dev - initialize debugging for an UBI device.
  * @ubi: UBI device description object
  *
@@ -479,5 +472,3 @@ void ubi_debugfs_exit_dev(struct ubi_device *ubi)
 {
 	debugfs_remove_recursive(ubi->dbg->dfs_dir);
 }
-
-#endif /* CONFIG_MTD_UBI_DEBUG */
diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h
index ead2cd16ba75..d5d2645b51a7 100644
--- a/drivers/mtd/ubi/debug.h
+++ b/drivers/mtd/ubi/debug.h
@@ -21,21 +21,20 @@
 #ifndef __UBI_DEBUG_H__
 #define __UBI_DEBUG_H__
 
-#ifdef CONFIG_MTD_UBI_DEBUG
+void ubi_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len);
+void ubi_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
+void ubi_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
+
 #include <linux/random.h>
 
 #define ubi_assert(expr)  do {                                               \
 	if (unlikely(!(expr))) {                                             \
 		printk(KERN_CRIT "UBI assert failed in %s at %u (pid %d)\n", \
 		       __func__, __LINE__, current->pid);                    \
-		ubi_dbg_dump_stack();                                        \
+		dump_stack();                                                \
 	}                                                                    \
 } while (0)
 
-#define dbg_err(fmt, ...) ubi_err(fmt, ##__VA_ARGS__)
-
-#define ubi_dbg_dump_stack() dump_stack()
-
 #define ubi_dbg_print_hex_dump(l, ps, pt, r, g, b, len, a)  \
 		print_hex_dump(l, ps, pt, r, g, b, len, a)
 
@@ -58,17 +57,13 @@
 /* Initialization and build messages */
 #define dbg_bld(fmt, ...) ubi_dbg_msg("bld", fmt, ##__VA_ARGS__)
 
-void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
-void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
-void ubi_dbg_dump_vol_info(const struct ubi_volume *vol);
-void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
-void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv);
-void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type);
-void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
-void ubi_dbg_dump_flash(struct ubi_device *ubi, int pnum, int offset, int len);
-int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len);
-int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum,
-			int offset, int len);
+void ubi_dump_vol_info(const struct ubi_volume *vol);
+void ubi_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
+void ubi_dump_av(const struct ubi_ainf_volume *av);
+void ubi_dump_aeb(const struct ubi_ainf_peb *aeb, int type);
+void ubi_dump_mkvol_req(const struct ubi_mkvol_req *req);
+int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset,
+			  int len);
 int ubi_debugging_init_dev(struct ubi_device *ubi);
 void ubi_debugging_exit_dev(struct ubi_device *ubi);
 int ubi_debugfs_init(void);
@@ -167,73 +162,4 @@ static inline int ubi_dbg_is_erase_failure(const struct ubi_device *ubi)
 	return 0;
 }
 
-#else
-
-/* Use "if (0)" to make compiler check arguments even if debugging is off */
-#define ubi_assert(expr)  do {                                               \
-	if (0) {                                                             \
-		printk(KERN_CRIT "UBI assert failed in %s at %u (pid %d)\n", \
-		       __func__, __LINE__, current->pid);                    \
-	}                                                                    \
-} while (0)
-
-#define dbg_err(fmt, ...) do {                                               \
-	if (0)                                                               \
-		ubi_err(fmt, ##__VA_ARGS__);                                 \
-} while (0)
-
-#define ubi_dbg_msg(fmt, ...) do {                                           \
-	if (0)                                                               \
-		printk(KERN_DEBUG fmt "\n", ##__VA_ARGS__);                  \
-} while (0)
-
-#define dbg_msg(fmt, ...)  ubi_dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_gen(fmt, ...)  ubi_dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_eba(fmt, ...)  ubi_dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_wl(fmt, ...)   ubi_dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_io(fmt, ...)   ubi_dbg_msg(fmt, ##__VA_ARGS__)
-#define dbg_bld(fmt, ...)  ubi_dbg_msg(fmt, ##__VA_ARGS__)
-
-static inline void ubi_dbg_dump_stack(void)                          { return; }
-static inline void
-ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)                 { return; }
-static inline void
-ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)              { return; }
-static inline void
-ubi_dbg_dump_vol_info(const struct ubi_volume *vol)                  { return; }
-static inline void
-ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)   { return; }
-static inline void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv) { return; }
-static inline void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb,
-				    int type)                        { return; }
-static inline void
-ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)              { return; }
-static inline void ubi_dbg_dump_flash(struct ubi_device *ubi,
-				      int pnum, int offset, int len) { return; }
-static inline void
-ubi_dbg_print_hex_dump(const char *l, const char *ps, int pt, int r,
-		       int g, const void *b, size_t len, bool a)     { return; }
-static inline int ubi_dbg_check_all_ff(struct ubi_device *ubi,
-				       int pnum, int offset,
-				       int len)                    { return 0; }
-static inline int ubi_dbg_check_write(struct ubi_device *ubi,
-				      const void *buf, int pnum,
-				      int offset, int len)         { return 0; }
-
-static inline int ubi_debugging_init_dev(struct ubi_device *ubi)   { return 0; }
-static inline void ubi_debugging_exit_dev(struct ubi_device *ubi)  { return; }
-static inline int ubi_debugfs_init(void)                           { return 0; }
-static inline void ubi_debugfs_exit(void)                          { return; }
-static inline int ubi_debugfs_init_dev(struct ubi_device *ubi)     { return 0; }
-static inline void ubi_debugfs_exit_dev(struct ubi_device *ubi)    { return; }
-
-static inline int
-ubi_dbg_is_bgt_disabled(const struct ubi_device *ubi)              { return 0; }
-static inline int ubi_dbg_is_bitflip(const struct ubi_device *ubi) { return 0; }
-static inline int
-ubi_dbg_is_write_failure(const struct ubi_device *ubi)             { return 0; }
-static inline int
-ubi_dbg_is_erase_failure(const struct ubi_device *ubi)             { return 0; }
-
-#endif /* !CONFIG_MTD_UBI_DEBUG */
 #endif /* !__UBI_DEBUG_H__ */
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 2455d620d96b..b703ac7729cf 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -341,7 +341,7 @@ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
 	dbg_eba("erase LEB %d:%d, PEB %d", vol_id, lnum, pnum);
 
 	vol->eba_tbl[lnum] = UBI_LEB_UNMAPPED;
-	err = ubi_wl_put_peb(ubi, pnum, 0);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 0);
 
 out_unlock:
 	leb_write_unlock(ubi, vol_id, lnum);
@@ -507,7 +507,7 @@ static int recover_peb(struct ubi_device *ubi, int pnum, int vol_id, int lnum,
 		return -ENOMEM;
 
 retry:
-	new_pnum = ubi_wl_get_peb(ubi, UBI_UNKNOWN);
+	new_pnum = ubi_wl_get_peb(ubi);
 	if (new_pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		return new_pnum;
@@ -550,7 +550,7 @@ retry:
 	ubi_free_vid_hdr(ubi, vid_hdr);
 
 	vol->eba_tbl[lnum] = new_pnum;
-	ubi_wl_put_peb(ubi, pnum, 1);
+	ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 
 	ubi_msg("data was successfully recovered");
 	return 0;
@@ -558,7 +558,7 @@ retry:
 out_unlock:
 	mutex_unlock(&ubi->buf_mutex);
 out_put:
-	ubi_wl_put_peb(ubi, new_pnum, 1);
+	ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
 
@@ -568,7 +568,7 @@ write_error:
 	 * get another one.
 	 */
 	ubi_warn("failed to write to PEB %d", new_pnum);
-	ubi_wl_put_peb(ubi, new_pnum, 1);
+	ubi_wl_put_peb(ubi, vol_id, lnum, new_pnum, 1);
 	if (++tries > UBI_IO_RETRIES) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		return err;
@@ -585,7 +585,6 @@ write_error:
  * @buf: the data to write
  * @offset: offset within the logical eraseblock where to write
  * @len: how many bytes to write
- * @dtype: data type
  *
  * This function writes data to logical eraseblock @lnum of a dynamic volume
  * @vol. Returns zero in case of success and a negative error code in case
@@ -593,7 +592,7 @@ write_error:
  * written to the flash media, but may be some garbage.
  */
 int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
-		      const void *buf, int offset, int len, int dtype)
+		      const void *buf, int offset, int len)
 {
 	int err, pnum, tries = 0, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -641,7 +640,7 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 	vid_hdr->data_pad = cpu_to_be32(vol->data_pad);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -687,7 +686,7 @@ write_error:
 	 * eraseblock, so just put it and request a new one. We assume that if
 	 * this physical eraseblock went bad, the erase code will handle that.
 	 */
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -707,7 +706,6 @@ write_error:
  * @lnum: logical eraseblock number
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: data type
  * @used_ebs: how many logical eraseblocks will this volume contain
  *
  * This function writes data to logical eraseblock @lnum of static volume
@@ -724,8 +722,7 @@ write_error:
  * code in case of failure.
  */
 int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
-			 int lnum, const void *buf, int len, int dtype,
-			 int used_ebs)
+			 int lnum, const void *buf, int len, int used_ebs)
 {
 	int err, pnum, tries = 0, data_size = len, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -763,7 +760,7 @@ int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
 	vid_hdr->data_crc = cpu_to_be32(crc);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		ubi_free_vid_hdr(ubi, vid_hdr);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -807,7 +804,7 @@ write_error:
 		return err;
 	}
 
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		leb_write_unlock(ubi, vol_id, lnum);
@@ -827,7 +824,6 @@ write_error:
  * @lnum: logical eraseblock number
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: data type
  *
  * This function changes the contents of a logical eraseblock atomically. @buf
  * has to contain new logical eraseblock data, and @len - the length of the
@@ -839,7 +835,7 @@ write_error:
  * LEB change may be done at a time. This is ensured by @ubi->alc_mutex.
  */
 int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
-			      int lnum, const void *buf, int len, int dtype)
+			      int lnum, const void *buf, int len)
 {
 	int err, pnum, tries = 0, vol_id = vol->vol_id;
 	struct ubi_vid_hdr *vid_hdr;
@@ -856,7 +852,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 		err = ubi_eba_unmap_leb(ubi, vol, lnum);
 		if (err)
 			return err;
-		return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+		return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
 	}
 
 	vid_hdr = ubi_zalloc_vid_hdr(ubi, GFP_NOFS);
@@ -881,7 +877,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	vid_hdr->data_crc = cpu_to_be32(crc);
 
 retry:
-	pnum = ubi_wl_get_peb(ubi, dtype);
+	pnum = ubi_wl_get_peb(ubi);
 	if (pnum < 0) {
 		err = pnum;
 		goto out_leb_unlock;
@@ -905,7 +901,7 @@ retry:
 	}
 
 	if (vol->eba_tbl[lnum] >= 0) {
-		err = ubi_wl_put_peb(ubi, vol->eba_tbl[lnum], 0);
+		err = ubi_wl_put_peb(ubi, vol_id, lnum, vol->eba_tbl[lnum], 0);
 		if (err)
 			goto out_leb_unlock;
 	}
@@ -930,7 +926,7 @@ write_error:
 		goto out_leb_unlock;
 	}
 
-	err = ubi_wl_put_peb(ubi, pnum, 1);
+	err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1);
 	if (err || ++tries > UBI_IO_RETRIES) {
 		ubi_ro_mode(ubi);
 		goto out_leb_unlock;
@@ -1171,7 +1167,7 @@ out_unlock_leb:
  * print_rsvd_warning - warn about not having enough reserved PEBs.
  * @ubi: UBI device description object
  *
- * This is a helper function for 'ubi_eba_init_scan()' which is called when UBI
+ * This is a helper function for 'ubi_eba_init()' which is called when UBI
  * cannot reserve enough PEBs for bad block handling. This function makes a
  * decision whether we have to print a warning or not. The algorithm is as
  * follows:
@@ -1186,13 +1182,13 @@ out_unlock_leb:
  * reported by real users.
  */
 static void print_rsvd_warning(struct ubi_device *ubi,
-			       struct ubi_scan_info *si)
+			       struct ubi_attach_info *ai)
 {
 	/*
 	 * The 1 << 18 (256KiB) number is picked randomly, just a reasonably
 	 * large number to distinguish between newly flashed and used images.
 	 */
-	if (si->max_sqnum > (1 << 18)) {
+	if (ai->max_sqnum > (1 << 18)) {
 		int min = ubi->beb_rsvd_level / 10;
 
 		if (!min)
@@ -1209,19 +1205,19 @@ static void print_rsvd_warning(struct ubi_device *ubi,
 }
 
 /**
- * ubi_eba_init_scan - initialize the EBA sub-system using scanning information.
+ * ubi_eba_init - initialize the EBA sub-system using attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
 	int i, j, err, num_volumes;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 	struct ubi_volume *vol;
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 	struct rb_node *rb;
 
 	dbg_eba("initialize EBA sub-system");
@@ -1230,7 +1226,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 	mutex_init(&ubi->alc_mutex);
 	ubi->ltree = RB_ROOT;
 
-	ubi->global_sqnum = si->max_sqnum + 1;
+	ubi->global_sqnum = ai->max_sqnum + 1;
 	num_volumes = ubi->vtbl_slots + UBI_INT_VOL_COUNT;
 
 	for (i = 0; i < num_volumes; i++) {
@@ -1250,18 +1246,18 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		for (j = 0; j < vol->reserved_pebs; j++)
 			vol->eba_tbl[j] = UBI_LEB_UNMAPPED;
 
-		sv = ubi_scan_find_sv(si, idx2vol_id(ubi, i));
-		if (!sv)
+		av = ubi_find_av(ai, idx2vol_id(ubi, i));
+		if (!av)
 			continue;
 
-		ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
-			if (seb->lnum >= vol->reserved_pebs)
+		ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
+			if (aeb->lnum >= vol->reserved_pebs)
 				/*
 				 * This may happen in case of an unclean reboot
 				 * during re-size.
 				 */
-				ubi_scan_move_to_list(sv, seb, &si->erase);
-			vol->eba_tbl[seb->lnum] = seb->pnum;
+				ubi_move_aeb_to_list(av, aeb, &ai->erase);
+			vol->eba_tbl[aeb->lnum] = aeb->pnum;
 		}
 	}
 
@@ -1283,7 +1279,7 @@ int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		if (ubi->avail_pebs < ubi->beb_rsvd_level) {
 			/* No enough free physical eraseblocks */
 			ubi->beb_rsvd_pebs = ubi->avail_pebs;
-			print_rsvd_warning(ubi, si);
+			print_rsvd_warning(ubi, ai);
 		} else
 			ubi->beb_rsvd_pebs = ubi->beb_rsvd_level;
 
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index 90b98822d9a4..4e44bee4c564 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -227,7 +227,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
 		if (to_write > total_written)
 			to_write = total_written;
 
-		err = ubi_write(gluebi->desc, lnum, buf, offs, to_write);
+		err = ubi_leb_write(gluebi->desc, lnum, buf, offs, to_write);
 		if (err)
 			break;
 
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 43f1a0011a55..a8d523794b52 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -91,21 +91,15 @@
 #include <linux/slab.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum);
-static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum);
-static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
-				 const struct ubi_ec_hdr *ec_hdr);
-static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
-static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
-				  const struct ubi_vid_hdr *vid_hdr);
-#else
-#define paranoid_check_not_bad(ubi, pnum) 0
-#define paranoid_check_peb_ec_hdr(ubi, pnum)  0
-#define paranoid_check_ec_hdr(ubi, pnum, ec_hdr)  0
-#define paranoid_check_peb_vid_hdr(ubi, pnum) 0
-#define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0
-#endif
+static int self_check_not_bad(const struct ubi_device *ubi, int pnum);
+static int self_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum);
+static int self_check_ec_hdr(const struct ubi_device *ubi, int pnum,
+			     const struct ubi_ec_hdr *ec_hdr);
+static int self_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum);
+static int self_check_vid_hdr(const struct ubi_device *ubi, int pnum,
+			      const struct ubi_vid_hdr *vid_hdr);
+static int self_check_write(struct ubi_device *ubi, const void *buf, int pnum,
+			    int offset, int len);
 
 /**
  * ubi_io_read - read data from a physical eraseblock.
@@ -142,7 +136,7 @@ int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset,
 	ubi_assert(offset >= 0 && offset + len <= ubi->peb_size);
 	ubi_assert(len > 0);
 
-	err = paranoid_check_not_bad(ubi, pnum);
+	err = self_check_not_bad(ubi, pnum);
 	if (err)
 		return err;
 
@@ -189,16 +183,16 @@ retry:
 		}
 
 		if (retries++ < UBI_IO_RETRIES) {
-			dbg_io("error %d%s while reading %d bytes from PEB "
-			       "%d:%d, read only %zd bytes, retry",
-			       err, errstr, len, pnum, offset, read);
+			ubi_warn("error %d%s while reading %d bytes from PEB "
+				 "%d:%d, read only %zd bytes, retry",
+				 err, errstr, len, pnum, offset, read);
 			yield();
 			goto retry;
 		}
 
 		ubi_err("error %d%s while reading %d bytes from PEB %d:%d, "
 			"read %zd bytes", err, errstr, len, pnum, offset, read);
-		ubi_dbg_dump_stack();
+		dump_stack();
 
 		/*
 		 * The driver should never return -EBADMSG if it failed to read
@@ -257,14 +251,12 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 		return -EROFS;
 	}
 
-	/* The below has to be compiled out if paranoid checks are disabled */
-
-	err = paranoid_check_not_bad(ubi, pnum);
+	err = self_check_not_bad(ubi, pnum);
 	if (err)
 		return err;
 
 	/* The area we are writing to has to contain all 0xFF bytes */
-	err = ubi_dbg_check_all_ff(ubi, pnum, offset, len);
+	err = ubi_self_check_all_ff(ubi, pnum, offset, len);
 	if (err)
 		return err;
 
@@ -273,18 +265,18 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 		 * We write to the data area of the physical eraseblock. Make
 		 * sure it has valid EC and VID headers.
 		 */
-		err = paranoid_check_peb_ec_hdr(ubi, pnum);
+		err = self_check_peb_ec_hdr(ubi, pnum);
 		if (err)
 			return err;
-		err = paranoid_check_peb_vid_hdr(ubi, pnum);
+		err = self_check_peb_vid_hdr(ubi, pnum);
 		if (err)
 			return err;
 	}
 
 	if (ubi_dbg_is_write_failure(ubi)) {
-		dbg_err("cannot write %d bytes to PEB %d:%d "
+		ubi_err("cannot write %d bytes to PEB %d:%d "
 			"(emulated)", len, pnum, offset);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		return -EIO;
 	}
 
@@ -293,13 +285,13 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 	if (err) {
 		ubi_err("error %d while writing %d bytes to PEB %d:%d, written "
 			"%zd bytes", err, len, pnum, offset, written);
-		ubi_dbg_dump_stack();
-		ubi_dbg_dump_flash(ubi, pnum, offset, len);
+		dump_stack();
+		ubi_dump_flash(ubi, pnum, offset, len);
 	} else
 		ubi_assert(written == len);
 
 	if (!err) {
-		err = ubi_dbg_check_write(ubi, buf, pnum, offset, len);
+		err = self_check_write(ubi, buf, pnum, offset, len);
 		if (err)
 			return err;
 
@@ -310,7 +302,7 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset,
 		offset += len;
 		len = ubi->peb_size - offset;
 		if (len)
-			err = ubi_dbg_check_all_ff(ubi, pnum, offset, len);
+			err = ubi_self_check_all_ff(ubi, pnum, offset, len);
 	}
 
 	return err;
@@ -364,13 +356,13 @@ retry:
 	err = mtd_erase(ubi->mtd, &ei);
 	if (err) {
 		if (retries++ < UBI_IO_RETRIES) {
-			dbg_io("error %d while erasing PEB %d, retry",
-			       err, pnum);
+			ubi_warn("error %d while erasing PEB %d, retry",
+				 err, pnum);
 			yield();
 			goto retry;
 		}
 		ubi_err("cannot erase PEB %d, error %d", pnum, err);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		return err;
 	}
 
@@ -383,21 +375,21 @@ retry:
 
 	if (ei.state == MTD_ERASE_FAILED) {
 		if (retries++ < UBI_IO_RETRIES) {
-			dbg_io("error while erasing PEB %d, retry", pnum);
+			ubi_warn("error while erasing PEB %d, retry", pnum);
 			yield();
 			goto retry;
 		}
 		ubi_err("cannot erase PEB %d", pnum);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		return -EIO;
 	}
 
-	err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size);
+	err = ubi_self_check_all_ff(ubi, pnum, 0, ubi->peb_size);
 	if (err)
 		return err;
 
 	if (ubi_dbg_is_erase_failure(ubi)) {
-		dbg_err("cannot erase PEB %d (emulated)", pnum);
+		ubi_err("cannot erase PEB %d (emulated)", pnum);
 		return -EIO;
 	}
 
@@ -521,8 +513,7 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
 	 * It is important to first invalidate the EC header, and then the VID
 	 * header. Otherwise a power cut may lead to valid EC header and
 	 * invalid VID header, in which case UBI will treat this PEB as
-	 * corrupted and will try to preserve it, and print scary warnings (see
-	 * the header comment in scan.c for more information).
+	 * corrupted and will try to preserve it, and print scary warnings.
 	 */
 	addr = (loff_t)pnum * ubi->peb_size;
 	err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data);
@@ -563,7 +554,7 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
 	 */
 	ubi_err("cannot invalidate PEB %d, write returned %d read returned %d",
 		pnum, err, err1);
-	ubi_dbg_dump_flash(ubi, pnum, 0, ubi->peb_size);
+	ubi_dump_flash(ubi, pnum, 0, ubi->peb_size);
 	return -EIO;
 }
 
@@ -589,7 +580,7 @@ int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture)
 
 	ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
 
-	err = paranoid_check_not_bad(ubi, pnum);
+	err = self_check_not_bad(ubi, pnum);
 	if (err != 0)
 		return err;
 
@@ -721,8 +712,8 @@ static int validate_ec_hdr(const struct ubi_device *ubi,
 
 bad:
 	ubi_err("bad EC header");
-	ubi_dbg_dump_ec_hdr(ec_hdr);
-	ubi_dbg_dump_stack();
+	ubi_dump_ec_hdr(ec_hdr);
+	dump_stack();
 	return 1;
 }
 
@@ -803,7 +794,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		if (verbose) {
 			ubi_warn("bad magic number at PEB %d: %08x instead of "
 				 "%08x", pnum, magic, UBI_EC_HDR_MAGIC);
-			ubi_dbg_dump_ec_hdr(ec_hdr);
+			ubi_dump_ec_hdr(ec_hdr);
 		}
 		dbg_bld("bad magic number at PEB %d: %08x instead of "
 			"%08x", pnum, magic, UBI_EC_HDR_MAGIC);
@@ -817,7 +808,7 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
 		if (verbose) {
 			ubi_warn("bad EC header CRC at PEB %d, calculated "
 				 "%#08x, read %#08x", pnum, crc, hdr_crc);
-			ubi_dbg_dump_ec_hdr(ec_hdr);
+			ubi_dump_ec_hdr(ec_hdr);
 		}
 		dbg_bld("bad EC header CRC at PEB %d, calculated "
 			"%#08x, read %#08x", pnum, crc, hdr_crc);
@@ -874,7 +865,7 @@ int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum,
 	crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC);
 	ec_hdr->hdr_crc = cpu_to_be32(crc);
 
-	err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr);
+	err = self_check_ec_hdr(ubi, pnum, ec_hdr);
 	if (err)
 		return err;
 
@@ -905,40 +896,40 @@ static int validate_vid_hdr(const struct ubi_device *ubi,
 	int usable_leb_size = ubi->leb_size - data_pad;
 
 	if (copy_flag != 0 && copy_flag != 1) {
-		dbg_err("bad copy_flag");
+		ubi_err("bad copy_flag");
 		goto bad;
 	}
 
 	if (vol_id < 0 || lnum < 0 || data_size < 0 || used_ebs < 0 ||
 	    data_pad < 0) {
-		dbg_err("negative values");
+		ubi_err("negative values");
 		goto bad;
 	}
 
 	if (vol_id >= UBI_MAX_VOLUMES && vol_id < UBI_INTERNAL_VOL_START) {
-		dbg_err("bad vol_id");
+		ubi_err("bad vol_id");
 		goto bad;
 	}
 
 	if (vol_id < UBI_INTERNAL_VOL_START && compat != 0) {
-		dbg_err("bad compat");
+		ubi_err("bad compat");
 		goto bad;
 	}
 
 	if (vol_id >= UBI_INTERNAL_VOL_START && compat != UBI_COMPAT_DELETE &&
 	    compat != UBI_COMPAT_RO && compat != UBI_COMPAT_PRESERVE &&
 	    compat != UBI_COMPAT_REJECT) {
-		dbg_err("bad compat");
+		ubi_err("bad compat");
 		goto bad;
 	}
 
 	if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) {
-		dbg_err("bad vol_type");
+		ubi_err("bad vol_type");
 		goto bad;
 	}
 
 	if (data_pad >= ubi->leb_size / 2) {
-		dbg_err("bad data_pad");
+		ubi_err("bad data_pad");
 		goto bad;
 	}
 
@@ -950,45 +941,45 @@ static int validate_vid_hdr(const struct ubi_device *ubi,
 		 * mapped logical eraseblocks.
 		 */
 		if (used_ebs == 0) {
-			dbg_err("zero used_ebs");
+			ubi_err("zero used_ebs");
 			goto bad;
 		}
 		if (data_size == 0) {
-			dbg_err("zero data_size");
+			ubi_err("zero data_size");
 			goto bad;
 		}
 		if (lnum < used_ebs - 1) {
 			if (data_size != usable_leb_size) {
-				dbg_err("bad data_size");
+				ubi_err("bad data_size");
 				goto bad;
 			}
 		} else if (lnum == used_ebs - 1) {
 			if (data_size == 0) {
-				dbg_err("bad data_size at last LEB");
+				ubi_err("bad data_size at last LEB");
 				goto bad;
 			}
 		} else {
-			dbg_err("too high lnum");
+			ubi_err("too high lnum");
 			goto bad;
 		}
 	} else {
 		if (copy_flag == 0) {
 			if (data_crc != 0) {
-				dbg_err("non-zero data CRC");
+				ubi_err("non-zero data CRC");
 				goto bad;
 			}
 			if (data_size != 0) {
-				dbg_err("non-zero data_size");
+				ubi_err("non-zero data_size");
 				goto bad;
 			}
 		} else {
 			if (data_size == 0) {
-				dbg_err("zero data_size of copy");
+				ubi_err("zero data_size of copy");
 				goto bad;
 			}
 		}
 		if (used_ebs != 0) {
-			dbg_err("bad used_ebs");
+			ubi_err("bad used_ebs");
 			goto bad;
 		}
 	}
@@ -997,8 +988,8 @@ static int validate_vid_hdr(const struct ubi_device *ubi,
 
 bad:
 	ubi_err("bad VID header");
-	ubi_dbg_dump_vid_hdr(vid_hdr);
-	ubi_dbg_dump_stack();
+	ubi_dump_vid_hdr(vid_hdr);
+	dump_stack();
 	return 1;
 }
 
@@ -1054,7 +1045,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 		if (verbose) {
 			ubi_warn("bad magic number at PEB %d: %08x instead of "
 				 "%08x", pnum, magic, UBI_VID_HDR_MAGIC);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
+			ubi_dump_vid_hdr(vid_hdr);
 		}
 		dbg_bld("bad magic number at PEB %d: %08x instead of "
 			"%08x", pnum, magic, UBI_VID_HDR_MAGIC);
@@ -1068,7 +1059,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
 		if (verbose) {
 			ubi_warn("bad CRC at PEB %d, calculated %#08x, "
 				 "read %#08x", pnum, crc, hdr_crc);
-			ubi_dbg_dump_vid_hdr(vid_hdr);
+			ubi_dump_vid_hdr(vid_hdr);
 		}
 		dbg_bld("bad CRC at PEB %d, calculated %#08x, "
 			"read %#08x", pnum, crc, hdr_crc);
@@ -1112,7 +1103,7 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
 	dbg_io("write VID header to PEB %d", pnum);
 	ubi_assert(pnum >= 0 &&  pnum < ubi->peb_count);
 
-	err = paranoid_check_peb_ec_hdr(ubi, pnum);
+	err = self_check_peb_ec_hdr(ubi, pnum);
 	if (err)
 		return err;
 
@@ -1121,7 +1112,7 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
 	crc = crc32(UBI_CRC32_INIT, vid_hdr, UBI_VID_HDR_SIZE_CRC);
 	vid_hdr->hdr_crc = cpu_to_be32(crc);
 
-	err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr);
+	err = self_check_vid_hdr(ubi, pnum, vid_hdr);
 	if (err)
 		return err;
 
@@ -1131,17 +1122,15 @@ int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum,
 	return err;
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-
 /**
- * paranoid_check_not_bad - ensure that a physical eraseblock is not bad.
+ * self_check_not_bad - ensure that a physical eraseblock is not bad.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number to check
  *
  * This function returns zero if the physical eraseblock is good, %-EINVAL if
  * it is bad and a negative error code if an error occurred.
  */
-static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum)
+static int self_check_not_bad(const struct ubi_device *ubi, int pnum)
 {
 	int err;
 
@@ -1152,13 +1141,13 @@ static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum)
 	if (!err)
 		return err;
 
-	ubi_err("paranoid check failed for PEB %d", pnum);
-	ubi_dbg_dump_stack();
+	ubi_err("self-check failed for PEB %d", pnum);
+	dump_stack();
 	return err > 0 ? -EINVAL : err;
 }
 
 /**
- * paranoid_check_ec_hdr - check if an erase counter header is all right.
+ * self_check_ec_hdr - check if an erase counter header is all right.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number the erase counter header belongs to
  * @ec_hdr: the erase counter header to check
@@ -1166,8 +1155,8 @@ static int paranoid_check_not_bad(const struct ubi_device *ubi, int pnum)
  * This function returns zero if the erase counter header contains valid
  * values, and %-EINVAL if not.
  */
-static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
-				 const struct ubi_ec_hdr *ec_hdr)
+static int self_check_ec_hdr(const struct ubi_device *ubi, int pnum,
+			     const struct ubi_ec_hdr *ec_hdr)
 {
 	int err;
 	uint32_t magic;
@@ -1184,27 +1173,27 @@ static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum,
 
 	err = validate_ec_hdr(ubi, ec_hdr);
 	if (err) {
-		ubi_err("paranoid check failed for PEB %d", pnum);
+		ubi_err("self-check failed for PEB %d", pnum);
 		goto fail;
 	}
 
 	return 0;
 
 fail:
-	ubi_dbg_dump_ec_hdr(ec_hdr);
-	ubi_dbg_dump_stack();
+	ubi_dump_ec_hdr(ec_hdr);
+	dump_stack();
 	return -EINVAL;
 }
 
 /**
- * paranoid_check_peb_ec_hdr - check erase counter header.
+ * self_check_peb_ec_hdr - check erase counter header.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  *
  * This function returns zero if the erase counter header is all right and and
  * a negative error code if not or if an error occurred.
  */
-static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum)
+static int self_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum)
 {
 	int err;
 	uint32_t crc, hdr_crc;
@@ -1225,14 +1214,14 @@ static int paranoid_check_peb_ec_hdr(const struct ubi_device *ubi, int pnum)
 	hdr_crc = be32_to_cpu(ec_hdr->hdr_crc);
 	if (hdr_crc != crc) {
 		ubi_err("bad CRC, calculated %#08x, read %#08x", crc, hdr_crc);
-		ubi_err("paranoid check failed for PEB %d", pnum);
-		ubi_dbg_dump_ec_hdr(ec_hdr);
-		ubi_dbg_dump_stack();
+		ubi_err("self-check failed for PEB %d", pnum);
+		ubi_dump_ec_hdr(ec_hdr);
+		dump_stack();
 		err = -EINVAL;
 		goto exit;
 	}
 
-	err = paranoid_check_ec_hdr(ubi, pnum, ec_hdr);
+	err = self_check_ec_hdr(ubi, pnum, ec_hdr);
 
 exit:
 	kfree(ec_hdr);
@@ -1240,7 +1229,7 @@ exit:
 }
 
 /**
- * paranoid_check_vid_hdr - check that a volume identifier header is all right.
+ * self_check_vid_hdr - check that a volume identifier header is all right.
  * @ubi: UBI device description object
  * @pnum: physical eraseblock number the volume identifier header belongs to
  * @vid_hdr: the volume identifier header to check
@@ -1248,8 +1237,8 @@ exit:
  * This function returns zero if the volume identifier header is all right, and
  * %-EINVAL if not.
  */
-static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
-				  const struct ubi_vid_hdr *vid_hdr)
+static int self_check_vid_hdr(const struct ubi_device *ubi, int pnum,
+			      const struct ubi_vid_hdr *vid_hdr)
 {
 	int err;
 	uint32_t magic;
@@ -1266,29 +1255,29 @@ static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum,
 
 	err = validate_vid_hdr(ubi, vid_hdr);
 	if (err) {
-		ubi_err("paranoid check failed for PEB %d", pnum);
+		ubi_err("self-check failed for PEB %d", pnum);
 		goto fail;
 	}
 
 	return err;
 
 fail:
-	ubi_err("paranoid check failed for PEB %d", pnum);
-	ubi_dbg_dump_vid_hdr(vid_hdr);
-	ubi_dbg_dump_stack();
+	ubi_err("self-check failed for PEB %d", pnum);
+	ubi_dump_vid_hdr(vid_hdr);
+	dump_stack();
 	return -EINVAL;
 
 }
 
 /**
- * paranoid_check_peb_vid_hdr - check volume identifier header.
+ * self_check_peb_vid_hdr - check volume identifier header.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  *
  * This function returns zero if the volume identifier header is all right,
  * and a negative error code if not or if an error occurred.
  */
-static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
+static int self_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
 {
 	int err;
 	uint32_t crc, hdr_crc;
@@ -1313,14 +1302,14 @@ static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum)
 	if (hdr_crc != crc) {
 		ubi_err("bad VID header CRC at PEB %d, calculated %#08x, "
 			"read %#08x", pnum, crc, hdr_crc);
-		ubi_err("paranoid check failed for PEB %d", pnum);
-		ubi_dbg_dump_vid_hdr(vid_hdr);
-		ubi_dbg_dump_stack();
+		ubi_err("self-check failed for PEB %d", pnum);
+		ubi_dump_vid_hdr(vid_hdr);
+		dump_stack();
 		err = -EINVAL;
 		goto exit;
 	}
 
-	err = paranoid_check_vid_hdr(ubi, pnum, vid_hdr);
+	err = self_check_vid_hdr(ubi, pnum, vid_hdr);
 
 exit:
 	ubi_free_vid_hdr(ubi, vid_hdr);
@@ -1328,7 +1317,7 @@ exit:
 }
 
 /**
- * ubi_dbg_check_write - make sure write succeeded.
+ * self_check_write - make sure write succeeded.
  * @ubi: UBI device description object
  * @buf: buffer with data which were written
  * @pnum: physical eraseblock number the data were written to
@@ -1339,8 +1328,8 @@ exit:
  * the original data buffer - the data have to match. Returns zero if the data
  * match and a negative error code if not or in case of failure.
  */
-int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum,
-			int offset, int len)
+static int self_check_write(struct ubi_device *ubi, const void *buf, int pnum,
+			    int offset, int len)
 {
 	int err, i;
 	size_t read;
@@ -1368,7 +1357,7 @@ int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum,
 		if (c == c1)
 			continue;
 
-		ubi_err("paranoid check failed for PEB %d:%d, len %d",
+		ubi_err("self-check failed for PEB %d:%d, len %d",
 			pnum, offset, len);
 		ubi_msg("data differ at position %d", i);
 		dump_len = max_t(int, 128, len - i);
@@ -1380,7 +1369,7 @@ int ubi_dbg_check_write(struct ubi_device *ubi, const void *buf, int pnum,
 			i, i + dump_len);
 		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 			       buf1 + i, dump_len, 1);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		err = -EINVAL;
 		goto out_free;
 	}
@@ -1394,7 +1383,7 @@ out_free:
 }
 
 /**
- * ubi_dbg_check_all_ff - check that a region of flash is empty.
+ * ubi_self_check_all_ff - check that a region of flash is empty.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  * @offset: the starting offset within the physical eraseblock to check
@@ -1404,7 +1393,7 @@ out_free:
  * @offset of the physical eraseblock @pnum, and a negative error code if not
  * or if an error occurred.
  */
-int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
+int ubi_self_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
 {
 	size_t read;
 	int err;
@@ -1438,14 +1427,12 @@ int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
 	return 0;
 
 fail:
-	ubi_err("paranoid check failed for PEB %d", pnum);
+	ubi_err("self-check failed for PEB %d", pnum);
 	ubi_msg("hex dump of the %d-%d region", offset, offset + len);
 	print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, buf, len, 1);
 	err = -EINVAL;
 error:
-	ubi_dbg_dump_stack();
+	dump_stack();
 	vfree(buf);
 	return err;
 }
-
-#endif /* CONFIG_MTD_UBI_DEBUG */
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index 9fdb35367fe0..3aac1acceeb4 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -221,7 +221,7 @@ out_free:
 	kfree(desc);
 out_put_ubi:
 	ubi_put_device(ubi);
-	dbg_err("cannot open device %d, volume %d, error %d",
+	ubi_err("cannot open device %d, volume %d, error %d",
 		ubi_num, vol_id, err);
 	return ERR_PTR(err);
 }
@@ -426,11 +426,9 @@ EXPORT_SYMBOL_GPL(ubi_leb_read);
  * @buf: data to write
  * @offset: offset within the logical eraseblock where to write
  * @len: how many bytes to write
- * @dtype: expected data type
  *
  * This function writes @len bytes of data from @buf to offset @offset of
- * logical eraseblock @lnum. The @dtype argument describes expected lifetime of
- * the data.
+ * logical eraseblock @lnum.
  *
  * This function takes care of physical eraseblock write failures. If write to
  * the physical eraseblock write operation fails, the logical eraseblock is
@@ -447,7 +445,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_read);
  * returns immediately with %-EBADF code.
  */
 int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		  int offset, int len, int dtype)
+		  int offset, int len)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
@@ -466,17 +464,13 @@ int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	    offset & (ubi->min_io_size - 1) || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (len == 0)
 		return 0;
 
-	return ubi_eba_write_leb(ubi, vol, lnum, buf, offset, len, dtype);
+	return ubi_eba_write_leb(ubi, vol, lnum, buf, offset, len);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_write);
 
@@ -486,7 +480,6 @@ EXPORT_SYMBOL_GPL(ubi_leb_write);
  * @lnum: logical eraseblock number to change
  * @buf: data to write
  * @len: how many bytes to write
- * @dtype: expected data type
  *
  * This function changes the contents of a logical eraseblock atomically. @buf
  * has to contain new logical eraseblock data, and @len - the length of the
@@ -497,7 +490,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_write);
  * code in case of failure.
  */
 int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		   int len, int dtype)
+		   int len)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
@@ -515,17 +508,13 @@ int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
 	    len > vol->usable_leb_size || len & (ubi->min_io_size - 1))
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (len == 0)
 		return 0;
 
-	return ubi_eba_atomic_leb_change(ubi, vol, lnum, buf, len, dtype);
+	return ubi_eba_atomic_leb_change(ubi, vol, lnum, buf, len);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_change);
 
@@ -562,7 +551,7 @@ int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum)
 	if (err)
 		return err;
 
-	return ubi_wl_flush(ubi);
+	return ubi_wl_flush(ubi, vol->vol_id, lnum);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_erase);
 
@@ -626,7 +615,6 @@ EXPORT_SYMBOL_GPL(ubi_leb_unmap);
  * ubi_leb_map - map logical eraseblock to a physical eraseblock.
  * @desc: volume descriptor
  * @lnum: logical eraseblock number
- * @dtype: expected data type
  *
  * This function maps an un-mapped logical eraseblock @lnum to a physical
  * eraseblock. This means, that after a successful invocation of this
@@ -639,7 +627,7 @@ EXPORT_SYMBOL_GPL(ubi_leb_unmap);
  * eraseblock is already mapped, and other negative error codes in case of
  * other failures.
  */
-int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
+int ubi_leb_map(struct ubi_volume_desc *desc, int lnum)
 {
 	struct ubi_volume *vol = desc->vol;
 	struct ubi_device *ubi = vol->ubi;
@@ -652,17 +640,13 @@ int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype)
 	if (lnum < 0 || lnum >= vol->reserved_pebs)
 		return -EINVAL;
 
-	if (dtype != UBI_LONGTERM && dtype != UBI_SHORTTERM &&
-	    dtype != UBI_UNKNOWN)
-		return -EINVAL;
-
 	if (vol->upd_marker)
 		return -EBADF;
 
 	if (vol->eba_tbl[lnum] >= 0)
 		return -EBADMSG;
 
-	return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0, dtype);
+	return ubi_eba_write_leb(ubi, vol, lnum, NULL, 0, 0);
 }
 EXPORT_SYMBOL_GPL(ubi_leb_map);
 
@@ -720,6 +704,33 @@ int ubi_sync(int ubi_num)
 }
 EXPORT_SYMBOL_GPL(ubi_sync);
 
+/**
+ * ubi_flush - flush UBI work queue.
+ * @ubi_num: UBI device to flush work queue
+ * @vol_id: volume id to flush for
+ * @lnum: logical eraseblock number to flush for
+ *
+ * This function executes all pending works for a particular volume id / logical
+ * eraseblock number pair. If either value is set to %UBI_ALL, then it acts as
+ * a wildcard for all of the corresponding volume numbers or logical
+ * eraseblock numbers. It returns zero in case of success and a negative error
+ * code in case of failure.
+ */
+int ubi_flush(int ubi_num, int vol_id, int lnum)
+{
+	struct ubi_device *ubi;
+	int err = 0;
+
+	ubi = ubi_get_device(ubi_num);
+	if (!ubi)
+		return -ENODEV;
+
+	err = ubi_wl_flush(ubi, vol_id, lnum);
+	ubi_put_device(ubi);
+	return err;
+}
+EXPORT_SYMBOL_GPL(ubi_flush);
+
 BLOCKING_NOTIFIER_HEAD(ubi_notifiers);
 
 /**
diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h
deleted file mode 100644
index d48aef15ab5d..000000000000
--- a/drivers/mtd/ubi/scan.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Author: Artem Bityutskiy (Битюцкий Артём)
- */
-
-#ifndef __UBI_SCAN_H__
-#define __UBI_SCAN_H__
-
-/* The erase counter value for this physical eraseblock is unknown */
-#define UBI_SCAN_UNKNOWN_EC (-1)
-
-/**
- * struct ubi_scan_leb - scanning information about a physical eraseblock.
- * @ec: erase counter (%UBI_SCAN_UNKNOWN_EC if it is unknown)
- * @pnum: physical eraseblock number
- * @lnum: logical eraseblock number
- * @scrub: if this physical eraseblock needs scrubbing
- * @copy_flag: this LEB is a copy (@copy_flag is set in VID header of this LEB)
- * @sqnum: sequence number
- * @u: unions RB-tree or @list links
- * @u.rb: link in the per-volume RB-tree of &struct ubi_scan_leb objects
- * @u.list: link in one of the eraseblock lists
- *
- * One object of this type is allocated for each physical eraseblock during
- * scanning.
- */
-struct ubi_scan_leb {
-	int ec;
-	int pnum;
-	int lnum;
-	unsigned int scrub:1;
-	unsigned int copy_flag:1;
-	unsigned long long sqnum;
-	union {
-		struct rb_node rb;
-		struct list_head list;
-	} u;
-};
-
-/**
- * struct ubi_scan_volume - scanning information about a volume.
- * @vol_id: volume ID
- * @highest_lnum: highest logical eraseblock number in this volume
- * @leb_count: number of logical eraseblocks in this volume
- * @vol_type: volume type
- * @used_ebs: number of used logical eraseblocks in this volume (only for
- *            static volumes)
- * @last_data_size: amount of data in the last logical eraseblock of this
- *                  volume (always equivalent to the usable logical eraseblock
- *                  size in case of dynamic volumes)
- * @data_pad: how many bytes at the end of logical eraseblocks of this volume
- *            are not used (due to volume alignment)
- * @compat: compatibility flags of this volume
- * @rb: link in the volume RB-tree
- * @root: root of the RB-tree containing all the eraseblock belonging to this
- *        volume (&struct ubi_scan_leb objects)
- *
- * One object of this type is allocated for each volume during scanning.
- */
-struct ubi_scan_volume {
-	int vol_id;
-	int highest_lnum;
-	int leb_count;
-	int vol_type;
-	int used_ebs;
-	int last_data_size;
-	int data_pad;
-	int compat;
-	struct rb_node rb;
-	struct rb_root root;
-};
-
-/**
- * struct ubi_scan_info - UBI scanning information.
- * @volumes: root of the volume RB-tree
- * @corr: list of corrupted physical eraseblocks
- * @free: list of free physical eraseblocks
- * @erase: list of physical eraseblocks which have to be erased
- * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
- *         those belonging to "preserve"-compatible internal volumes)
- * @corr_peb_count: count of PEBs in the @corr list
- * @empty_peb_count: count of PEBs which are presumably empty (contain only
- *                   0xFF bytes)
- * @alien_peb_count: count of PEBs in the @alien list
- * @bad_peb_count: count of bad physical eraseblocks
- * @maybe_bad_peb_count: count of bad physical eraseblocks which are not marked
- *                       as bad yet, but which look like bad
- * @vols_found: number of volumes found during scanning
- * @highest_vol_id: highest volume ID
- * @is_empty: flag indicating whether the MTD device is empty or not
- * @min_ec: lowest erase counter value
- * @max_ec: highest erase counter value
- * @max_sqnum: highest sequence number value
- * @mean_ec: mean erase counter value
- * @ec_sum: a temporary variable used when calculating @mean_ec
- * @ec_count: a temporary variable used when calculating @mean_ec
- * @scan_leb_slab: slab cache for &struct ubi_scan_leb objects
- *
- * This data structure contains the result of scanning and may be used by other
- * UBI sub-systems to build final UBI data structures, further error-recovery
- * and so on.
- */
-struct ubi_scan_info {
-	struct rb_root volumes;
-	struct list_head corr;
-	struct list_head free;
-	struct list_head erase;
-	struct list_head alien;
-	int corr_peb_count;
-	int empty_peb_count;
-	int alien_peb_count;
-	int bad_peb_count;
-	int maybe_bad_peb_count;
-	int vols_found;
-	int highest_vol_id;
-	int is_empty;
-	int min_ec;
-	int max_ec;
-	unsigned long long max_sqnum;
-	int mean_ec;
-	uint64_t ec_sum;
-	int ec_count;
-	struct kmem_cache *scan_leb_slab;
-};
-
-struct ubi_device;
-struct ubi_vid_hdr;
-
-/*
- * ubi_scan_move_to_list - move a PEB from the volume tree to a list.
- *
- * @sv: volume scanning information
- * @seb: scanning eraseblock information
- * @list: the list to move to
- */
-static inline void ubi_scan_move_to_list(struct ubi_scan_volume *sv,
-					 struct ubi_scan_leb *seb,
-					 struct list_head *list)
-{
-		rb_erase(&seb->u.rb, &sv->root);
-		list_add_tail(&seb->u.list, list);
-}
-
-int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
-		      int pnum, int ec, const struct ubi_vid_hdr *vid_hdr,
-		      int bitflips);
-struct ubi_scan_volume *ubi_scan_find_sv(const struct ubi_scan_info *si,
-					 int vol_id);
-struct ubi_scan_leb *ubi_scan_find_seb(const struct ubi_scan_volume *sv,
-				       int lnum);
-void ubi_scan_rm_volume(struct ubi_scan_info *si, struct ubi_scan_volume *sv);
-struct ubi_scan_leb *ubi_scan_get_free_peb(struct ubi_device *ubi,
-					   struct ubi_scan_info *si);
-int ubi_scan_erase_peb(struct ubi_device *ubi, const struct ubi_scan_info *si,
-		       int pnum, int ec);
-struct ubi_scan_info *ubi_scan(struct ubi_device *ubi);
-void ubi_scan_destroy_si(struct ubi_scan_info *si);
-
-#endif /* !__UBI_SCAN_H__ */
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 6fb8ec2174a5..468ffbc0eabd 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -149,10 +149,10 @@ enum {
  * The @image_seq field is used to validate a UBI image that has been prepared
  * for a UBI device. The @image_seq value can be any value, but it must be the
  * same on all eraseblocks. UBI will ensure that all new erase counter headers
- * also contain this value, and will check the value when scanning at start-up.
+ * also contain this value, and will check the value when attaching the flash.
  * One way to make use of @image_seq is to increase its value by one every time
  * an image is flashed over an existing image, then, if the flashing does not
- * complete, UBI will detect the error when scanning.
+ * complete, UBI will detect the error when attaching the media.
  */
 struct ubi_ec_hdr {
 	__be32  magic;
@@ -298,8 +298,8 @@ struct ubi_vid_hdr {
 #define UBI_INT_VOL_COUNT 1
 
 /*
- * Starting ID of internal volumes. There is reserved room for 4096 internal
- * volumes.
+ * Starting ID of internal volumes: 0x7fffefff.
+ * There is reserved room for 4096 internal volumes.
  */
 #define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096)
 
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index b162790790a9..a1a81c9ea8ce 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -43,7 +43,6 @@
 #include <asm/pgtable.h>
 
 #include "ubi-media.h"
-#include "scan.h"
 
 /* Maximum number of supported UBI devices */
 #define UBI_MAX_DEVICES 32
@@ -66,7 +65,10 @@
 /* Background thread name pattern */
 #define UBI_BGT_NAME_PATTERN "ubi_bgt%dd"
 
-/* This marker in the EBA table means that the LEB is um-mapped */
+/*
+ * This marker in the EBA table means that the LEB is um-mapped.
+ * NOTE! It has to have the same value as %UBI_ALL.
+ */
 #define UBI_LEB_UNMAPPED -1
 
 /*
@@ -82,6 +84,9 @@
  */
 #define UBI_PROT_QUEUE_LEN 10
 
+/* The volume ID/LEB number/erase counter is unknown */
+#define UBI_UNKNOWN -1
+
 /*
  * Error codes returned by the I/O sub-system.
  *
@@ -222,8 +227,6 @@ struct ubi_volume_desc;
  * @upd_ebs: how many eraseblocks are expected to be updated
  * @ch_lnum: LEB number which is being changing by the atomic LEB change
  *           operation
- * @ch_dtype: data persistency type which is being changing by the atomic LEB
- *            change operation
  * @upd_bytes: how many bytes are expected to be received for volume update or
  *             atomic LEB change
  * @upd_received: how many bytes were already received for volume update or
@@ -270,7 +273,6 @@ struct ubi_volume {
 
 	int upd_ebs;
 	int ch_lnum;
-	int ch_dtype;
 	long long upd_bytes;
 	long long upd_received;
 	void *upd_buf;
@@ -477,6 +479,124 @@ struct ubi_device {
 	struct ubi_debug_info *dbg;
 };
 
+/**
+ * struct ubi_ainf_peb - attach information about a physical eraseblock.
+ * @ec: erase counter (%UBI_UNKNOWN if it is unknown)
+ * @pnum: physical eraseblock number
+ * @vol_id: ID of the volume this LEB belongs to
+ * @lnum: logical eraseblock number
+ * @scrub: if this physical eraseblock needs scrubbing
+ * @copy_flag: this LEB is a copy (@copy_flag is set in VID header of this LEB)
+ * @sqnum: sequence number
+ * @u: unions RB-tree or @list links
+ * @u.rb: link in the per-volume RB-tree of &struct ubi_ainf_peb objects
+ * @u.list: link in one of the eraseblock lists
+ *
+ * One object of this type is allocated for each physical eraseblock when
+ * attaching an MTD device. Note, if this PEB does not belong to any LEB /
+ * volume, the @vol_id and @lnum fields are initialized to %UBI_UNKNOWN.
+ */
+struct ubi_ainf_peb {
+	int ec;
+	int pnum;
+	int vol_id;
+	int lnum;
+	unsigned int scrub:1;
+	unsigned int copy_flag:1;
+	unsigned long long sqnum;
+	union {
+		struct rb_node rb;
+		struct list_head list;
+	} u;
+};
+
+/**
+ * struct ubi_ainf_volume - attaching information about a volume.
+ * @vol_id: volume ID
+ * @highest_lnum: highest logical eraseblock number in this volume
+ * @leb_count: number of logical eraseblocks in this volume
+ * @vol_type: volume type
+ * @used_ebs: number of used logical eraseblocks in this volume (only for
+ *            static volumes)
+ * @last_data_size: amount of data in the last logical eraseblock of this
+ *                  volume (always equivalent to the usable logical eraseblock
+ *                  size in case of dynamic volumes)
+ * @data_pad: how many bytes at the end of logical eraseblocks of this volume
+ *            are not used (due to volume alignment)
+ * @compat: compatibility flags of this volume
+ * @rb: link in the volume RB-tree
+ * @root: root of the RB-tree containing all the eraseblock belonging to this
+ *        volume (&struct ubi_ainf_peb objects)
+ *
+ * One object of this type is allocated for each volume when attaching an MTD
+ * device.
+ */
+struct ubi_ainf_volume {
+	int vol_id;
+	int highest_lnum;
+	int leb_count;
+	int vol_type;
+	int used_ebs;
+	int last_data_size;
+	int data_pad;
+	int compat;
+	struct rb_node rb;
+	struct rb_root root;
+};
+
+/**
+ * struct ubi_attach_info - MTD device attaching information.
+ * @volumes: root of the volume RB-tree
+ * @corr: list of corrupted physical eraseblocks
+ * @free: list of free physical eraseblocks
+ * @erase: list of physical eraseblocks which have to be erased
+ * @alien: list of physical eraseblocks which should not be used by UBI (e.g.,
+ *         those belonging to "preserve"-compatible internal volumes)
+ * @corr_peb_count: count of PEBs in the @corr list
+ * @empty_peb_count: count of PEBs which are presumably empty (contain only
+ *                   0xFF bytes)
+ * @alien_peb_count: count of PEBs in the @alien list
+ * @bad_peb_count: count of bad physical eraseblocks
+ * @maybe_bad_peb_count: count of bad physical eraseblocks which are not marked
+ *                       as bad yet, but which look like bad
+ * @vols_found: number of volumes found
+ * @highest_vol_id: highest volume ID
+ * @is_empty: flag indicating whether the MTD device is empty or not
+ * @min_ec: lowest erase counter value
+ * @max_ec: highest erase counter value
+ * @max_sqnum: highest sequence number value
+ * @mean_ec: mean erase counter value
+ * @ec_sum: a temporary variable used when calculating @mean_ec
+ * @ec_count: a temporary variable used when calculating @mean_ec
+ * @aeb_slab_cache: slab cache for &struct ubi_ainf_peb objects
+ *
+ * This data structure contains the result of attaching an MTD device and may
+ * be used by other UBI sub-systems to build final UBI data structures, further
+ * error-recovery and so on.
+ */
+struct ubi_attach_info {
+	struct rb_root volumes;
+	struct list_head corr;
+	struct list_head free;
+	struct list_head erase;
+	struct list_head alien;
+	int corr_peb_count;
+	int empty_peb_count;
+	int alien_peb_count;
+	int bad_peb_count;
+	int maybe_bad_peb_count;
+	int vols_found;
+	int highest_vol_id;
+	int is_empty;
+	int min_ec;
+	int max_ec;
+	unsigned long long max_sqnum;
+	int mean_ec;
+	uint64_t ec_sum;
+	int ec_count;
+	struct kmem_cache *aeb_slab_cache;
+};
+
 #include "debug.h"
 
 extern struct kmem_cache *ubi_wl_entry_slab;
@@ -487,12 +607,23 @@ extern struct class *ubi_class;
 extern struct mutex ubi_devices_mutex;
 extern struct blocking_notifier_head ubi_notifiers;
 
+/* scan.c */
+int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
+		  int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips);
+struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
+				    int vol_id);
+void ubi_remove_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av);
+struct ubi_ainf_peb *ubi_early_get_peb(struct ubi_device *ubi,
+				       struct ubi_attach_info *ai);
+int ubi_attach(struct ubi_device *ubi);
+void ubi_destroy_ai(struct ubi_attach_info *ai);
+
 /* vtbl.c */
 int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 			   struct ubi_vtbl_record *vtbl_rec);
 int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
 			    struct list_head *rename_list);
-int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_attach_info *ai);
 
 /* vmt.c */
 int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req);
@@ -525,22 +656,22 @@ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol,
 int ubi_eba_read_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 		     void *buf, int offset, int len, int check);
 int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
-		      const void *buf, int offset, int len, int dtype);
+		      const void *buf, int offset, int len);
 int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol,
-			 int lnum, const void *buf, int len, int dtype,
-			 int used_ebs);
+			 int lnum, const void *buf, int len, int used_ebs);
 int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
-			      int lnum, const void *buf, int len, int dtype);
+			      int lnum, const void *buf, int len);
 int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 		     struct ubi_vid_hdr *vid_hdr);
-int ubi_eba_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai);
 
 /* wl.c */
-int ubi_wl_get_peb(struct ubi_device *ubi, int dtype);
-int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture);
-int ubi_wl_flush(struct ubi_device *ubi);
+int ubi_wl_get_peb(struct ubi_device *ubi);
+int ubi_wl_put_peb(struct ubi_device *ubi, int vol_id, int lnum,
+		   int pnum, int torture);
+int ubi_wl_flush(struct ubi_device *ubi, int vol_id, int lnum);
 int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum);
-int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si);
+int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai);
 void ubi_wl_close(struct ubi_device *ubi);
 int ubi_thread(void *u);
 
@@ -573,6 +704,7 @@ int ubi_volume_notify(struct ubi_device *ubi, struct ubi_volume *vol,
 int ubi_notify_all(struct ubi_device *ubi, int ntype,
 		   struct notifier_block *nb);
 int ubi_enumerate_volumes(struct notifier_block *nb);
+void ubi_free_internal_volumes(struct ubi_device *ubi);
 
 /* kapi.c */
 void ubi_do_get_device_info(struct ubi_device *ubi, struct ubi_device_info *di);
@@ -593,6 +725,21 @@ void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
 	     rb = rb_next(rb),                                               \
 	     pos = (rb ? container_of(rb, typeof(*pos), member) : NULL))
 
+/*
+ * ubi_move_aeb_to_list - move a PEB from the volume tree to a list.
+ *
+ * @av: volume attaching information
+ * @aeb: attaching eraseblock information
+ * @list: the list to move to
+ */
+static inline void ubi_move_aeb_to_list(struct ubi_ainf_volume *av,
+					 struct ubi_ainf_peb *aeb,
+					 struct list_head *list)
+{
+		rb_erase(&aeb->u.rb, &av->root);
+		list_add_tail(&aeb->u.list, list);
+}
+
 /**
  * ubi_zalloc_vid_hdr - allocate a volume identifier header object.
  * @ubi: UBI device description object
@@ -667,7 +814,7 @@ static inline void ubi_ro_mode(struct ubi_device *ubi)
 	if (!ubi->ro_mode) {
 		ubi->ro_mode = 1;
 		ubi_warn("switch to read-only mode");
-		ubi_dbg_dump_stack();
+		dump_stack();
 	}
 }
 
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index 425bf5a3edd4..9f2ebd8750e7 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -147,7 +147,7 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol,
 	}
 
 	if (bytes == 0) {
-		err = ubi_wl_flush(ubi);
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
 		if (err)
 			return err;
 
@@ -186,14 +186,12 @@ int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol,
 	dbg_gen("start changing LEB %d:%d, %u bytes",
 		vol->vol_id, req->lnum, req->bytes);
 	if (req->bytes == 0)
-		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0,
-						 req->dtype);
+		return ubi_eba_atomic_leb_change(ubi, vol, req->lnum, NULL, 0);
 
 	vol->upd_bytes = req->bytes;
 	vol->upd_received = 0;
 	vol->changing_leb = 1;
 	vol->ch_lnum = req->lnum;
-	vol->ch_dtype = req->dtype;
 
 	vol->upd_buf = vmalloc(req->bytes);
 	if (!vol->upd_buf)
@@ -246,8 +244,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 			return 0;
 		}
 
-		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len,
-					UBI_UNKNOWN);
+		err = ubi_eba_write_leb(ubi, vol, lnum, buf, 0, len);
 	} else {
 		/*
 		 * When writing static volume, and this is the last logical
@@ -259,8 +256,7 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
 		 * contain zeros, not random trash.
 		 */
 		memset(buf + len, 0, vol->usable_leb_size - len);
-		err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len,
-					   UBI_UNKNOWN, used_ebs);
+		err = ubi_eba_write_leb_st(ubi, vol, lnum, buf, len, used_ebs);
 	}
 
 	return err;
@@ -365,7 +361,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol,
 
 	ubi_assert(vol->upd_received <= vol->upd_bytes);
 	if (vol->upd_received == vol->upd_bytes) {
-		err = ubi_wl_flush(ubi);
+		err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
 		if (err)
 			return err;
 		/* The update is finished, clear the update marker */
@@ -421,7 +417,7 @@ int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol,
 		       len - vol->upd_bytes);
 		len = ubi_calc_data_len(ubi, vol->upd_buf, len);
 		err = ubi_eba_atomic_leb_change(ubi, vol, vol->ch_lnum,
-						vol->upd_buf, len, UBI_UNKNOWN);
+						vol->upd_buf, len);
 		if (err)
 			return err;
 	}
diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c
index 863835f4aefe..0669cff8ac3c 100644
--- a/drivers/mtd/ubi/vmt.c
+++ b/drivers/mtd/ubi/vmt.c
@@ -29,11 +29,7 @@
 #include <linux/export.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-static int paranoid_check_volumes(struct ubi_device *ubi);
-#else
-#define paranoid_check_volumes(ubi) 0
-#endif
+static int self_check_volumes(struct ubi_device *ubi);
 
 static ssize_t vol_attribute_show(struct device *dev,
 				  struct device_attribute *attr, char *buf);
@@ -227,7 +223,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 			}
 
 		if (vol_id == UBI_VOL_NUM_AUTO) {
-			dbg_err("out of volume IDs");
+			ubi_err("out of volume IDs");
 			err = -ENFILE;
 			goto out_unlock;
 		}
@@ -241,7 +237,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	/* Ensure that this volume does not exist */
 	err = -EEXIST;
 	if (ubi->volumes[vol_id]) {
-		dbg_err("volume %d already exists", vol_id);
+		ubi_err("volume %d already exists", vol_id);
 		goto out_unlock;
 	}
 
@@ -250,7 +246,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 		if (ubi->volumes[i] &&
 		    ubi->volumes[i]->name_len == req->name_len &&
 		    !strcmp(ubi->volumes[i]->name, req->name)) {
-			dbg_err("volume \"%s\" exists (ID %d)", req->name, i);
+			ubi_err("volume \"%s\" exists (ID %d)", req->name, i);
 			goto out_unlock;
 		}
 
@@ -261,9 +257,9 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 
 	/* Reserve physical eraseblocks */
 	if (vol->reserved_pebs > ubi->avail_pebs) {
-		dbg_err("not enough PEBs, only %d available", ubi->avail_pebs);
+		ubi_err("not enough PEBs, only %d available", ubi->avail_pebs);
 		if (ubi->corr_peb_count)
-			dbg_err("%d PEBs are corrupted and not used",
+			ubi_err("%d PEBs are corrupted and not used",
 				ubi->corr_peb_count);
 		err = -ENOSPC;
 		goto out_unlock;
@@ -284,7 +280,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	 * Finish all pending erases because there may be some LEBs belonging
 	 * to the same volume ID.
 	 */
-	err = ubi_wl_flush(ubi);
+	err = ubi_wl_flush(ubi, vol_id, UBI_ALL);
 	if (err)
 		goto out_acc;
 
@@ -360,8 +356,7 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req)
 	spin_unlock(&ubi->volumes_lock);
 
 	ubi_volume_notify(ubi, vol, UBI_VOLUME_ADDED);
-	if (paranoid_check_volumes(ubi))
-		dbg_err("check failed while creating volume %d", vol_id);
+	self_check_volumes(ubi);
 	return err;
 
 out_sysfs:
@@ -461,8 +456,8 @@ int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl)
 	spin_unlock(&ubi->volumes_lock);
 
 	ubi_volume_notify(ubi, vol, UBI_VOLUME_REMOVED);
-	if (!no_vtbl && paranoid_check_volumes(ubi))
-		dbg_err("check failed while removing volume %d", vol_id);
+	if (!no_vtbl)
+		self_check_volumes(ubi);
 
 	return err;
 
@@ -500,7 +495,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 
 	if (vol->vol_type == UBI_STATIC_VOLUME &&
 	    reserved_pebs < vol->used_ebs) {
-		dbg_err("too small size %d, %d LEBs contain data",
+		ubi_err("too small size %d, %d LEBs contain data",
 			reserved_pebs, vol->used_ebs);
 		return -EINVAL;
 	}
@@ -529,10 +524,10 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	if (pebs > 0) {
 		spin_lock(&ubi->volumes_lock);
 		if (pebs > ubi->avail_pebs) {
-			dbg_err("not enough PEBs: requested %d, available %d",
+			ubi_err("not enough PEBs: requested %d, available %d",
 				pebs, ubi->avail_pebs);
 			if (ubi->corr_peb_count)
-				dbg_err("%d PEBs are corrupted and not used",
+				ubi_err("%d PEBs are corrupted and not used",
 					ubi->corr_peb_count);
 			spin_unlock(&ubi->volumes_lock);
 			err = -ENOSPC;
@@ -588,8 +583,7 @@ int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs)
 	}
 
 	ubi_volume_notify(ubi, vol, UBI_VOLUME_RESIZED);
-	if (paranoid_check_volumes(ubi))
-		dbg_err("check failed while re-sizing volume %d", vol_id);
+	self_check_volumes(ubi);
 	return err;
 
 out_acc:
@@ -638,8 +632,8 @@ int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list)
 		}
 	}
 
-	if (!err && paranoid_check_volumes(ubi))
-		;
+	if (!err)
+		self_check_volumes(ubi);
 	return err;
 }
 
@@ -686,8 +680,7 @@ int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 		return err;
 	}
 
-	if (paranoid_check_volumes(ubi))
-		dbg_err("check failed while adding volume %d", vol_id);
+	self_check_volumes(ubi);
 	return err;
 
 out_cdev:
@@ -712,16 +705,14 @@ void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol)
 	volume_sysfs_close(vol);
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-
 /**
- * paranoid_check_volume - check volume information.
+ * self_check_volume - check volume information.
  * @ubi: UBI device description object
  * @vol_id: volume ID
  *
  * Returns zero if volume is all right and a a negative error code if not.
  */
-static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
+static int self_check_volume(struct ubi_device *ubi, int vol_id)
 {
 	int idx = vol_id2idx(ubi, vol_id);
 	int reserved_pebs, alignment, data_pad, vol_type, name_len, upd_marker;
@@ -771,7 +762,7 @@ static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 	}
 
 	if (vol->upd_marker && vol->corrupted) {
-		dbg_err("update marker and corrupted simultaneously");
+		ubi_err("update marker and corrupted simultaneously");
 		goto fail;
 	}
 
@@ -853,22 +844,22 @@ static int paranoid_check_volume(struct ubi_device *ubi, int vol_id)
 	return 0;
 
 fail:
-	ubi_err("paranoid check failed for volume %d", vol_id);
+	ubi_err("self-check failed for volume %d", vol_id);
 	if (vol)
-		ubi_dbg_dump_vol_info(vol);
-	ubi_dbg_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
+		ubi_dump_vol_info(vol);
+	ubi_dump_vtbl_record(&ubi->vtbl[vol_id], vol_id);
 	dump_stack();
 	spin_unlock(&ubi->volumes_lock);
 	return -EINVAL;
 }
 
 /**
- * paranoid_check_volumes - check information about all volumes.
+ * self_check_volumes - check information about all volumes.
  * @ubi: UBI device description object
  *
  * Returns zero if volumes are all right and a a negative error code if not.
  */
-static int paranoid_check_volumes(struct ubi_device *ubi)
+static int self_check_volumes(struct ubi_device *ubi)
 {
 	int i, err = 0;
 
@@ -876,11 +867,10 @@ static int paranoid_check_volumes(struct ubi_device *ubi)
 		return 0;
 
 	for (i = 0; i < ubi->vtbl_slots; i++) {
-		err = paranoid_check_volume(ubi, i);
+		err = self_check_volume(ubi, i);
 		if (err)
 			break;
 	}
 
 	return err;
 }
-#endif
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 17cec0c01544..437bc193e170 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -37,16 +37,15 @@
  * LEB 1. This scheme guarantees recoverability from unclean reboots.
  *
  * In this UBI implementation the on-flash volume table does not contain any
- * information about how many data static volumes contain. This information may
- * be found from the scanning data.
+ * information about how much data static volumes contain.
  *
  * But it would still be beneficial to store this information in the volume
  * table. For example, suppose we have a static volume X, and all its physical
  * eraseblocks became bad for some reasons. Suppose we are attaching the
- * corresponding MTD device, the scanning has found no logical eraseblocks
+ * corresponding MTD device, for some reason we find no logical eraseblocks
  * corresponding to the volume X. According to the volume table volume X does
  * exist. So we don't know whether it is just empty or all its physical
- * eraseblocks went bad. So we cannot alarm the user about this corruption.
+ * eraseblocks went bad. So we cannot alarm the user properly.
  *
  * The volume table also stores so-called "update marker", which is used for
  * volume updates. Before updating the volume, the update marker is set, and
@@ -62,11 +61,7 @@
 #include <asm/div64.h>
 #include "ubi.h"
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-static void paranoid_vtbl_check(const struct ubi_device *ubi);
-#else
-#define paranoid_vtbl_check(ubi)
-#endif
+static void self_vtbl_check(const struct ubi_device *ubi);
 
 /* Empty volume table record */
 static struct ubi_vtbl_record empty_vtbl_record;
@@ -106,12 +101,12 @@ int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
 			return err;
 
 		err = ubi_eba_write_leb(ubi, layout_vol, i, ubi->vtbl, 0,
-					ubi->vtbl_size, UBI_LONGTERM);
+					ubi->vtbl_size);
 		if (err)
 			return err;
 	}
 
-	paranoid_vtbl_check(ubi);
+	self_vtbl_check(ubi);
 	return 0;
 }
 
@@ -158,7 +153,7 @@ int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
 			return err;
 
 		err = ubi_eba_write_leb(ubi, layout_vol, i, ubi->vtbl, 0,
-					ubi->vtbl_size, UBI_LONGTERM);
+					ubi->vtbl_size);
 		if (err)
 			return err;
 	}
@@ -197,7 +192,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 		if (be32_to_cpu(vtbl[i].crc) != crc) {
 			ubi_err("bad CRC at record %u: %#08x, not %#08x",
 				 i, crc, be32_to_cpu(vtbl[i].crc));
-			ubi_dbg_dump_vtbl_record(&vtbl[i], i);
+			ubi_dump_vtbl_record(&vtbl[i], i);
 			return 1;
 		}
 
@@ -229,7 +224,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 
 		n = ubi->leb_size % alignment;
 		if (data_pad != n) {
-			dbg_err("bad data_pad, has to be %d", n);
+			ubi_err("bad data_pad, has to be %d", n);
 			err = 6;
 			goto bad;
 		}
@@ -245,7 +240,7 @@ static int vtbl_check(const struct ubi_device *ubi,
 		}
 
 		if (reserved_pebs > ubi->good_peb_count) {
-			dbg_err("too large reserved_pebs %d, good PEBs %d",
+			ubi_err("too large reserved_pebs %d, good PEBs %d",
 				reserved_pebs, ubi->good_peb_count);
 			err = 9;
 			goto bad;
@@ -277,8 +272,8 @@ static int vtbl_check(const struct ubi_device *ubi,
 			    !strncmp(vtbl[i].name, vtbl[n].name, len1)) {
 				ubi_err("volumes %d and %d have the same name"
 					" \"%s\"", i, n, vtbl[i].name);
-				ubi_dbg_dump_vtbl_record(&vtbl[i], i);
-				ubi_dbg_dump_vtbl_record(&vtbl[n], n);
+				ubi_dump_vtbl_record(&vtbl[i], i);
+				ubi_dump_vtbl_record(&vtbl[n], n);
 				return -EINVAL;
 			}
 		}
@@ -288,26 +283,26 @@ static int vtbl_check(const struct ubi_device *ubi,
 
 bad:
 	ubi_err("volume table check failed: record %d, error %d", i, err);
-	ubi_dbg_dump_vtbl_record(&vtbl[i], i);
+	ubi_dump_vtbl_record(&vtbl[i], i);
 	return -EINVAL;
 }
 
 /**
  * create_vtbl - create a copy of volume table.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  * @copy: number of the volume table copy
  * @vtbl: contents of the volume table
  *
  * This function returns zero in case of success and a negative error code in
  * case of failure.
  */
-static int create_vtbl(struct ubi_device *ubi, struct ubi_scan_info *si,
+static int create_vtbl(struct ubi_device *ubi, struct ubi_attach_info *ai,
 		       int copy, void *vtbl)
 {
 	int err, tries = 0;
 	struct ubi_vid_hdr *vid_hdr;
-	struct ubi_scan_leb *new_seb;
+	struct ubi_ainf_peb *new_aeb;
 
 	ubi_msg("create volume table (copy #%d)", copy + 1);
 
@@ -316,9 +311,9 @@ static int create_vtbl(struct ubi_device *ubi, struct ubi_scan_info *si,
 		return -ENOMEM;
 
 retry:
-	new_seb = ubi_scan_get_free_peb(ubi, si);
-	if (IS_ERR(new_seb)) {
-		err = PTR_ERR(new_seb);
+	new_aeb = ubi_early_get_peb(ubi, ai);
+	if (IS_ERR(new_aeb)) {
+		err = PTR_ERR(new_aeb);
 		goto out_free;
 	}
 
@@ -328,25 +323,24 @@ retry:
 	vid_hdr->data_size = vid_hdr->used_ebs =
 			     vid_hdr->data_pad = cpu_to_be32(0);
 	vid_hdr->lnum = cpu_to_be32(copy);
-	vid_hdr->sqnum = cpu_to_be64(++si->max_sqnum);
+	vid_hdr->sqnum = cpu_to_be64(++ai->max_sqnum);
 
 	/* The EC header is already there, write the VID header */
-	err = ubi_io_write_vid_hdr(ubi, new_seb->pnum, vid_hdr);
+	err = ubi_io_write_vid_hdr(ubi, new_aeb->pnum, vid_hdr);
 	if (err)
 		goto write_error;
 
 	/* Write the layout volume contents */
-	err = ubi_io_write_data(ubi, vtbl, new_seb->pnum, 0, ubi->vtbl_size);
+	err = ubi_io_write_data(ubi, vtbl, new_aeb->pnum, 0, ubi->vtbl_size);
 	if (err)
 		goto write_error;
 
 	/*
-	 * And add it to the scanning information. Don't delete the old version
-	 * of this LEB as it will be deleted and freed in 'ubi_scan_add_used()'.
+	 * And add it to the attaching information. Don't delete the old version
+	 * of this LEB as it will be deleted and freed in 'ubi_add_to_av()'.
 	 */
-	err = ubi_scan_add_used(ubi, si, new_seb->pnum, new_seb->ec,
-				vid_hdr, 0);
-	kfree(new_seb);
+	err = ubi_add_to_av(ubi, ai, new_aeb->pnum, new_aeb->ec, vid_hdr, 0);
+	kfree(new_aeb);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
 
@@ -356,10 +350,10 @@ write_error:
 		 * Probably this physical eraseblock went bad, try to pick
 		 * another one.
 		 */
-		list_add(&new_seb->u.list, &si->erase);
+		list_add(&new_aeb->u.list, &ai->erase);
 		goto retry;
 	}
-	kfree(new_seb);
+	kfree(new_aeb);
 out_free:
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
@@ -369,20 +363,20 @@ out_free:
 /**
  * process_lvol - process the layout volume.
  * @ubi: UBI device description object
- * @si: scanning information
- * @sv: layout volume scanning information
+ * @ai: attaching information
+ * @av: layout volume attaching information
  *
  * This function is responsible for reading the layout volume, ensuring it is
  * not corrupted, and recovering from corruptions if needed. Returns volume
  * table in case of success and a negative error code in case of failure.
  */
 static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
-					    struct ubi_scan_info *si,
-					    struct ubi_scan_volume *sv)
+					    struct ubi_attach_info *ai,
+					    struct ubi_ainf_volume *av)
 {
 	int err;
 	struct rb_node *rb;
-	struct ubi_scan_leb *seb;
+	struct ubi_ainf_peb *aeb;
 	struct ubi_vtbl_record *leb[UBI_LAYOUT_VOLUME_EBS] = { NULL, NULL };
 	int leb_corrupted[UBI_LAYOUT_VOLUME_EBS] = {1, 1};
 
@@ -414,14 +408,14 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 	dbg_gen("check layout volume");
 
 	/* Read both LEB 0 and LEB 1 into memory */
-	ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) {
-		leb[seb->lnum] = vzalloc(ubi->vtbl_size);
-		if (!leb[seb->lnum]) {
+	ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
+		leb[aeb->lnum] = vzalloc(ubi->vtbl_size);
+		if (!leb[aeb->lnum]) {
 			err = -ENOMEM;
 			goto out_free;
 		}
 
-		err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0,
+		err = ubi_io_read_data(ubi, leb[aeb->lnum], aeb->pnum, 0,
 				       ubi->vtbl_size);
 		if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err))
 			/*
@@ -429,12 +423,12 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 			 * uncorrectable ECC error, but we have our own CRC and
 			 * the data will be checked later. If the data is OK,
 			 * the PEB will be scrubbed (because we set
-			 * seb->scrub). If the data is not OK, the contents of
+			 * aeb->scrub). If the data is not OK, the contents of
 			 * the PEB will be recovered from the second copy, and
-			 * seb->scrub will be cleared in
-			 * 'ubi_scan_add_used()'.
+			 * aeb->scrub will be cleared in
+			 * 'ubi_add_to_av()'.
 			 */
-			seb->scrub = 1;
+			aeb->scrub = 1;
 		else if (err)
 			goto out_free;
 	}
@@ -453,7 +447,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 						  ubi->vtbl_size);
 		if (leb_corrupted[1]) {
 			ubi_warn("volume table copy #2 is corrupted");
-			err = create_vtbl(ubi, si, 1, leb[0]);
+			err = create_vtbl(ubi, ai, 1, leb[0]);
 			if (err)
 				goto out_free;
 			ubi_msg("volume table was restored");
@@ -476,7 +470,7 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
 		}
 
 		ubi_warn("volume table copy #1 is corrupted");
-		err = create_vtbl(ubi, si, 0, leb[1]);
+		err = create_vtbl(ubi, ai, 0, leb[1]);
 		if (err)
 			goto out_free;
 		ubi_msg("volume table was restored");
@@ -494,13 +488,13 @@ out_free:
 /**
  * create_empty_lvol - create empty layout volume.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function returns volume table contents in case of success and a
  * negative error code in case of failure.
  */
 static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
-						 struct ubi_scan_info *si)
+						 struct ubi_attach_info *ai)
 {
 	int i;
 	struct ubi_vtbl_record *vtbl;
@@ -515,7 +509,7 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
 	for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
 		int err;
 
-		err = create_vtbl(ubi, si, i, vtbl);
+		err = create_vtbl(ubi, ai, i, vtbl);
 		if (err) {
 			vfree(vtbl);
 			return ERR_PTR(err);
@@ -528,18 +522,19 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
 /**
  * init_volumes - initialize volume information for existing volumes.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: scanning information
  * @vtbl: volume table
  *
  * This function allocates volume description objects for existing volumes.
  * Returns zero in case of success and a negative error code in case of
  * failure.
  */
-static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
+static int init_volumes(struct ubi_device *ubi,
+			const struct ubi_attach_info *ai,
 			const struct ubi_vtbl_record *vtbl)
 {
 	int i, reserved_pebs = 0;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 	struct ubi_volume *vol;
 
 	for (i = 0; i < ubi->vtbl_slots; i++) {
@@ -595,8 +590,8 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 		}
 
 		/* Static volumes only */
-		sv = ubi_scan_find_sv(si, i);
-		if (!sv) {
+		av = ubi_find_av(ai, i);
+		if (!av) {
 			/*
 			 * No eraseblocks belonging to this volume found. We
 			 * don't actually know whether this static volume is
@@ -608,22 +603,22 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 			continue;
 		}
 
-		if (sv->leb_count != sv->used_ebs) {
+		if (av->leb_count != av->used_ebs) {
 			/*
 			 * We found a static volume which misses several
 			 * eraseblocks. Treat it as corrupted.
 			 */
 			ubi_warn("static volume %d misses %d LEBs - corrupted",
-				 sv->vol_id, sv->used_ebs - sv->leb_count);
+				 av->vol_id, av->used_ebs - av->leb_count);
 			vol->corrupted = 1;
 			continue;
 		}
 
-		vol->used_ebs = sv->used_ebs;
+		vol->used_ebs = av->used_ebs;
 		vol->used_bytes =
 			(long long)(vol->used_ebs - 1) * vol->usable_leb_size;
-		vol->used_bytes += sv->last_data_size;
-		vol->last_eb_bytes = sv->last_data_size;
+		vol->used_bytes += av->last_data_size;
+		vol->last_eb_bytes = av->last_data_size;
 	}
 
 	/* And add the layout volume */
@@ -664,105 +659,104 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
 }
 
 /**
- * check_sv - check volume scanning information.
+ * check_av - check volume attaching information.
  * @vol: UBI volume description object
- * @sv: volume scanning information
+ * @av: volume attaching information
  *
- * This function returns zero if the volume scanning information is consistent
+ * This function returns zero if the volume attaching information is consistent
  * to the data read from the volume tabla, and %-EINVAL if not.
  */
-static int check_sv(const struct ubi_volume *vol,
-		    const struct ubi_scan_volume *sv)
+static int check_av(const struct ubi_volume *vol,
+		    const struct ubi_ainf_volume *av)
 {
 	int err;
 
-	if (sv->highest_lnum >= vol->reserved_pebs) {
+	if (av->highest_lnum >= vol->reserved_pebs) {
 		err = 1;
 		goto bad;
 	}
-	if (sv->leb_count > vol->reserved_pebs) {
+	if (av->leb_count > vol->reserved_pebs) {
 		err = 2;
 		goto bad;
 	}
-	if (sv->vol_type != vol->vol_type) {
+	if (av->vol_type != vol->vol_type) {
 		err = 3;
 		goto bad;
 	}
-	if (sv->used_ebs > vol->reserved_pebs) {
+	if (av->used_ebs > vol->reserved_pebs) {
 		err = 4;
 		goto bad;
 	}
-	if (sv->data_pad != vol->data_pad) {
+	if (av->data_pad != vol->data_pad) {
 		err = 5;
 		goto bad;
 	}
 	return 0;
 
 bad:
-	ubi_err("bad scanning information, error %d", err);
-	ubi_dbg_dump_sv(sv);
-	ubi_dbg_dump_vol_info(vol);
+	ubi_err("bad attaching information, error %d", err);
+	ubi_dump_av(av);
+	ubi_dump_vol_info(vol);
 	return -EINVAL;
 }
 
 /**
- * check_scanning_info - check that scanning information.
+ * check_attaching_info - check that attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * Even though we protect on-flash data by CRC checksums, we still don't trust
- * the media. This function ensures that scanning information is consistent to
- * the information read from the volume table. Returns zero if the scanning
+ * the media. This function ensures that attaching information is consistent to
+ * the information read from the volume table. Returns zero if the attaching
  * information is OK and %-EINVAL if it is not.
  */
-static int check_scanning_info(const struct ubi_device *ubi,
-			       struct ubi_scan_info *si)
+static int check_attaching_info(const struct ubi_device *ubi,
+			       struct ubi_attach_info *ai)
 {
 	int err, i;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 	struct ubi_volume *vol;
 
-	if (si->vols_found > UBI_INT_VOL_COUNT + ubi->vtbl_slots) {
-		ubi_err("scanning found %d volumes, maximum is %d + %d",
-			si->vols_found, UBI_INT_VOL_COUNT, ubi->vtbl_slots);
+	if (ai->vols_found > UBI_INT_VOL_COUNT + ubi->vtbl_slots) {
+		ubi_err("found %d volumes while attaching, maximum is %d + %d",
+			ai->vols_found, UBI_INT_VOL_COUNT, ubi->vtbl_slots);
 		return -EINVAL;
 	}
 
-	if (si->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
-	    si->highest_vol_id < UBI_INTERNAL_VOL_START) {
-		ubi_err("too large volume ID %d found by scanning",
-			si->highest_vol_id);
+	if (ai->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
+	    ai->highest_vol_id < UBI_INTERNAL_VOL_START) {
+		ubi_err("too large volume ID %d found", ai->highest_vol_id);
 		return -EINVAL;
 	}
 
 	for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
 		cond_resched();
 
-		sv = ubi_scan_find_sv(si, i);
+		av = ubi_find_av(ai, i);
 		vol = ubi->volumes[i];
 		if (!vol) {
-			if (sv)
-				ubi_scan_rm_volume(si, sv);
+			if (av)
+				ubi_remove_av(ai, av);
 			continue;
 		}
 
 		if (vol->reserved_pebs == 0) {
 			ubi_assert(i < ubi->vtbl_slots);
 
-			if (!sv)
+			if (!av)
 				continue;
 
 			/*
-			 * During scanning we found a volume which does not
+			 * During attaching we found a volume which does not
 			 * exist according to the information in the volume
 			 * table. This must have happened due to an unclean
 			 * reboot while the volume was being removed. Discard
 			 * these eraseblocks.
 			 */
-			ubi_msg("finish volume %d removal", sv->vol_id);
-			ubi_scan_rm_volume(si, sv);
-		} else if (sv) {
-			err = check_sv(vol, sv);
+			ubi_msg("finish volume %d removal", av->vol_id);
+			ubi_remove_av(ai, av);
+		} else if (av) {
+			err = check_av(vol, av);
 			if (err)
 				return err;
 		}
@@ -774,16 +768,16 @@ static int check_scanning_info(const struct ubi_device *ubi,
 /**
  * ubi_read_volume_table - read the volume table.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function reads volume table, checks it, recover from errors if needed,
  * or creates it if needed. Returns zero in case of success and a negative
  * error code in case of failure.
  */
-int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
 	int i, err;
-	struct ubi_scan_volume *sv;
+	struct ubi_ainf_volume *av;
 
 	empty_vtbl_record.crc = cpu_to_be32(0xf116c36b);
 
@@ -798,8 +792,8 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 	ubi->vtbl_size = ubi->vtbl_slots * UBI_VTBL_RECORD_SIZE;
 	ubi->vtbl_size = ALIGN(ubi->vtbl_size, ubi->min_io_size);
 
-	sv = ubi_scan_find_sv(si, UBI_LAYOUT_VOLUME_ID);
-	if (!sv) {
+	av = ubi_find_av(ai, UBI_LAYOUT_VOLUME_ID);
+	if (!av) {
 		/*
 		 * No logical eraseblocks belonging to the layout volume were
 		 * found. This could mean that the flash is just empty. In
@@ -808,8 +802,8 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 		 * But if flash is not empty this must be a corruption or the
 		 * MTD device just contains garbage.
 		 */
-		if (si->is_empty) {
-			ubi->vtbl = create_empty_lvol(ubi, si);
+		if (ai->is_empty) {
+			ubi->vtbl = create_empty_lvol(ubi, ai);
 			if (IS_ERR(ubi->vtbl))
 				return PTR_ERR(ubi->vtbl);
 		} else {
@@ -817,14 +811,14 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 			return -EINVAL;
 		}
 	} else {
-		if (sv->leb_count > UBI_LAYOUT_VOLUME_EBS) {
+		if (av->leb_count > UBI_LAYOUT_VOLUME_EBS) {
 			/* This must not happen with proper UBI images */
-			dbg_err("too many LEBs (%d) in layout volume",
-				sv->leb_count);
+			ubi_err("too many LEBs (%d) in layout volume",
+				av->leb_count);
 			return -EINVAL;
 		}
 
-		ubi->vtbl = process_lvol(ubi, si, sv);
+		ubi->vtbl = process_lvol(ubi, ai, av);
 		if (IS_ERR(ubi->vtbl))
 			return PTR_ERR(ubi->vtbl);
 	}
@@ -835,15 +829,15 @@ int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_scan_info *si)
 	 * The layout volume is OK, initialize the corresponding in-RAM data
 	 * structures.
 	 */
-	err = init_volumes(ubi, si, ubi->vtbl);
+	err = init_volumes(ubi, ai, ubi->vtbl);
 	if (err)
 		goto out_free;
 
 	/*
-	 * Make sure that the scanning information is consistent to the
+	 * Make sure that the attaching information is consistent to the
 	 * information stored in the volume table.
 	 */
-	err = check_scanning_info(ubi, si);
+	err = check_attaching_info(ubi, ai);
 	if (err)
 		goto out_free;
 
@@ -858,21 +852,17 @@ out_free:
 	return err;
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-
 /**
- * paranoid_vtbl_check - check volume table.
+ * self_vtbl_check - check volume table.
  * @ubi: UBI device description object
  */
-static void paranoid_vtbl_check(const struct ubi_device *ubi)
+static void self_vtbl_check(const struct ubi_device *ubi)
 {
 	if (!ubi->dbg->chk_gen)
 		return;
 
 	if (vtbl_check(ubi, ubi->vtbl)) {
-		ubi_err("paranoid check failed");
+		ubi_err("self-check failed");
 		BUG();
 	}
 }
-
-#endif /* CONFIG_MTD_UBI_DEBUG */
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 7c1a9bf8ac86..9df100a4ec38 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -41,12 +41,6 @@
  * physical eraseblocks with low erase counter to free physical eraseblocks
  * with high erase counter.
  *
- * The 'ubi_wl_get_peb()' function accepts data type hints which help to pick
- * an "optimal" physical eraseblock. For example, when it is known that the
- * physical eraseblock will be "put" soon because it contains short-term data,
- * the WL sub-system may pick a free physical eraseblock with low erase
- * counter, and so forth.
- *
  * If the WL sub-system fails to erase a physical eraseblock, it marks it as
  * bad.
  *
@@ -70,8 +64,7 @@
  *    to the user; instead, we first want to let users fill them up with data;
  *
  *  o there is a chance that the user will put the physical eraseblock very
- *    soon, so it makes sense not to move it for some time, but wait; this is
- *    especially important in case of "short term" physical eraseblocks.
+ *    soon, so it makes sense not to move it for some time, but wait.
  *
  * Physical eraseblocks stay protected only for limited time. But the "time" is
  * measured in erase cycles in this case. This is implemented with help of the
@@ -147,6 +140,8 @@
  * @list: a link in the list of pending works
  * @func: worker function
  * @e: physical eraseblock to erase
+ * @vol_id: the volume ID on which this erasure is being performed
+ * @lnum: the logical eraseblock number
  * @torture: if the physical eraseblock has to be tortured
  *
  * The @func pointer points to the worker function. If the @cancel argument is
@@ -159,21 +154,16 @@ struct ubi_work {
 	int (*func)(struct ubi_device *ubi, struct ubi_work *wrk, int cancel);
 	/* The below fields are only relevant to erasure works */
 	struct ubi_wl_entry *e;
+	int vol_id;
+	int lnum;
 	int torture;
 };
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec);
-static int paranoid_check_in_wl_tree(const struct ubi_device *ubi,
-				     struct ubi_wl_entry *e,
-				     struct rb_root *root);
-static int paranoid_check_in_pq(const struct ubi_device *ubi,
-				struct ubi_wl_entry *e);
-#else
-#define paranoid_check_ec(ubi, pnum, ec) 0
-#define paranoid_check_in_wl_tree(ubi, e, root)
-#define paranoid_check_in_pq(ubi, e) 0
-#endif
+static int self_check_ec(struct ubi_device *ubi, int pnum, int ec);
+static int self_check_in_wl_tree(const struct ubi_device *ubi,
+				 struct ubi_wl_entry *e, struct rb_root *root);
+static int self_check_in_pq(const struct ubi_device *ubi,
+			    struct ubi_wl_entry *e);
 
 /**
  * wl_tree_add - add a wear-leveling entry to a WL RB-tree.
@@ -383,19 +373,15 @@ static struct ubi_wl_entry *find_wl_entry(struct rb_root *root, int diff)
 /**
  * ubi_wl_get_peb - get a physical eraseblock.
  * @ubi: UBI device description object
- * @dtype: type of data which will be stored in this physical eraseblock
  *
  * This function returns a physical eraseblock in case of success and a
  * negative error code in case of failure. Might sleep.
  */
-int ubi_wl_get_peb(struct ubi_device *ubi, int dtype)
+int ubi_wl_get_peb(struct ubi_device *ubi)
 {
 	int err;
 	struct ubi_wl_entry *e, *first, *last;
 
-	ubi_assert(dtype == UBI_LONGTERM || dtype == UBI_SHORTTERM ||
-		   dtype == UBI_UNKNOWN);
-
 retry:
 	spin_lock(&ubi->wl_lock);
 	if (!ubi->free.rb_node) {
@@ -413,45 +399,15 @@ retry:
 		goto retry;
 	}
 
-	switch (dtype) {
-	case UBI_LONGTERM:
-		/*
-		 * For long term data we pick a physical eraseblock with high
-		 * erase counter. But the highest erase counter we can pick is
-		 * bounded by the the lowest erase counter plus
-		 * %WL_FREE_MAX_DIFF.
-		 */
-		e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
-		break;
-	case UBI_UNKNOWN:
-		/*
-		 * For unknown data we pick a physical eraseblock with medium
-		 * erase counter. But we by no means can pick a physical
-		 * eraseblock with erase counter greater or equivalent than the
-		 * lowest erase counter plus %WL_FREE_MAX_DIFF/2.
-		 */
-		first = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry,
-					u.rb);
-		last = rb_entry(rb_last(&ubi->free), struct ubi_wl_entry, u.rb);
-
-		if (last->ec - first->ec < WL_FREE_MAX_DIFF)
-			e = rb_entry(ubi->free.rb_node,
-					struct ubi_wl_entry, u.rb);
-		else
-			e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF/2);
-		break;
-	case UBI_SHORTTERM:
-		/*
-		 * For short term data we pick a physical eraseblock with the
-		 * lowest erase counter as we expect it will be erased soon.
-		 */
-		e = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, u.rb);
-		break;
-	default:
-		BUG();
-	}
+	first = rb_entry(rb_first(&ubi->free), struct ubi_wl_entry, u.rb);
+	last = rb_entry(rb_last(&ubi->free), struct ubi_wl_entry, u.rb);
+
+	if (last->ec - first->ec < WL_FREE_MAX_DIFF)
+		e = rb_entry(ubi->free.rb_node, struct ubi_wl_entry, u.rb);
+	else
+		e = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF/2);
 
-	paranoid_check_in_wl_tree(ubi, e, &ubi->free);
+	self_check_in_wl_tree(ubi, e, &ubi->free);
 
 	/*
 	 * Move the physical eraseblock to the protection queue where it will
@@ -462,8 +418,8 @@ retry:
 	prot_queue_add(ubi, e);
 	spin_unlock(&ubi->wl_lock);
 
-	err = ubi_dbg_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset,
-				   ubi->peb_size - ubi->vid_hdr_aloffset);
+	err = ubi_self_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset,
+				    ubi->peb_size - ubi->vid_hdr_aloffset);
 	if (err) {
 		ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum);
 		return err;
@@ -488,7 +444,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum)
 	if (!e)
 		return -ENODEV;
 
-	if (paranoid_check_in_pq(ubi, e))
+	if (self_check_in_pq(ubi, e))
 		return -ENODEV;
 
 	list_del(&e->u.list);
@@ -514,7 +470,7 @@ static int sync_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
 
 	dbg_wl("erase PEB %d, old EC %llu", e->pnum, ec);
 
-	err = paranoid_check_ec(ubi, e->pnum, e->ec);
+	err = self_check_ec(ubi, e->pnum, e->ec);
 	if (err)
 		return -EINVAL;
 
@@ -627,13 +583,15 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
  * schedule_erase - schedule an erase work.
  * @ubi: UBI device description object
  * @e: the WL entry of the physical eraseblock to erase
+ * @vol_id: the volume ID that last used this PEB
+ * @lnum: the last used logical eraseblock number for the PEB
  * @torture: if the physical eraseblock has to be tortured
  *
  * This function returns zero in case of success and a %-ENOMEM in case of
  * failure.
  */
 static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
-			  int torture)
+			  int vol_id, int lnum, int torture)
 {
 	struct ubi_work *wl_wrk;
 
@@ -646,6 +604,8 @@ static int schedule_erase(struct ubi_device *ubi, struct ubi_wl_entry *e,
 
 	wl_wrk->func = &erase_worker;
 	wl_wrk->e = e;
+	wl_wrk->vol_id = vol_id;
+	wl_wrk->lnum = lnum;
 	wl_wrk->torture = torture;
 
 	schedule_ubi_work(ubi, wl_wrk);
@@ -714,7 +674,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 			       e1->ec, e2->ec);
 			goto out_cancel;
 		}
-		paranoid_check_in_wl_tree(ubi, e1, &ubi->used);
+		self_check_in_wl_tree(ubi, e1, &ubi->used);
 		rb_erase(&e1->u.rb, &ubi->used);
 		dbg_wl("move PEB %d EC %d to PEB %d EC %d",
 		       e1->pnum, e1->ec, e2->pnum, e2->ec);
@@ -723,12 +683,12 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 		scrubbing = 1;
 		e1 = rb_entry(rb_first(&ubi->scrub), struct ubi_wl_entry, u.rb);
 		e2 = find_wl_entry(&ubi->free, WL_FREE_MAX_DIFF);
-		paranoid_check_in_wl_tree(ubi, e1, &ubi->scrub);
+		self_check_in_wl_tree(ubi, e1, &ubi->scrub);
 		rb_erase(&e1->u.rb, &ubi->scrub);
 		dbg_wl("scrub PEB %d to PEB %d", e1->pnum, e2->pnum);
 	}
 
-	paranoid_check_in_wl_tree(ubi, e2, &ubi->free);
+	self_check_in_wl_tree(ubi, e2, &ubi->free);
 	rb_erase(&e2->u.rb, &ubi->free);
 	ubi->move_from = e1;
 	ubi->move_to = e2;
@@ -846,7 +806,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 	ubi->move_to_put = ubi->wl_scheduled = 0;
 	spin_unlock(&ubi->wl_lock);
 
-	err = schedule_erase(ubi, e1, 0);
+	err = schedule_erase(ubi, e1, vol_id, lnum, 0);
 	if (err) {
 		kmem_cache_free(ubi_wl_entry_slab, e1);
 		if (e2)
@@ -861,7 +821,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk,
 		 */
 		dbg_wl("PEB %d (LEB %d:%d) was put meanwhile, erase",
 		       e2->pnum, vol_id, lnum);
-		err = schedule_erase(ubi, e2, 0);
+		err = schedule_erase(ubi, e2, vol_id, lnum, 0);
 		if (err) {
 			kmem_cache_free(ubi_wl_entry_slab, e2);
 			goto out_ro;
@@ -900,7 +860,7 @@ out_not_moved:
 	spin_unlock(&ubi->wl_lock);
 
 	ubi_free_vid_hdr(ubi, vid_hdr);
-	err = schedule_erase(ubi, e2, torture);
+	err = schedule_erase(ubi, e2, vol_id, lnum, torture);
 	if (err) {
 		kmem_cache_free(ubi_wl_entry_slab, e2);
 		goto out_ro;
@@ -1019,6 +979,8 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 {
 	struct ubi_wl_entry *e = wl_wrk->e;
 	int pnum = e->pnum, err, need;
+	int vol_id = wl_wrk->vol_id;
+	int lnum = wl_wrk->lnum;
 
 	if (cancel) {
 		dbg_wl("cancel erasure of PEB %d EC %d", pnum, e->ec);
@@ -1027,7 +989,8 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 		return 0;
 	}
 
-	dbg_wl("erase PEB %d EC %d", pnum, e->ec);
+	dbg_wl("erase PEB %d EC %d LEB %d:%d",
+	       pnum, e->ec, wl_wrk->vol_id, wl_wrk->lnum);
 
 	err = sync_erase(ubi, e, wl_wrk->torture);
 	if (!err) {
@@ -1057,7 +1020,7 @@ static int erase_worker(struct ubi_device *ubi, struct ubi_work *wl_wrk,
 		int err1;
 
 		/* Re-schedule the LEB for erasure */
-		err1 = schedule_erase(ubi, e, 0);
+		err1 = schedule_erase(ubi, e, vol_id, lnum, 0);
 		if (err1) {
 			err = err1;
 			goto out_ro;
@@ -1125,6 +1088,8 @@ out_ro:
 /**
  * ubi_wl_put_peb - return a PEB to the wear-leveling sub-system.
  * @ubi: UBI device description object
+ * @vol_id: the volume ID that last used this PEB
+ * @lnum: the last used logical eraseblock number for the PEB
  * @pnum: physical eraseblock to return
  * @torture: if this physical eraseblock has to be tortured
  *
@@ -1133,7 +1098,8 @@ out_ro:
  * occurred to this @pnum and it has to be tested. This function returns zero
  * in case of success, and a negative error code in case of failure.
  */
-int ubi_wl_put_peb(struct ubi_device *ubi, int pnum, int torture)
+int ubi_wl_put_peb(struct ubi_device *ubi, int vol_id, int lnum,
+		   int pnum, int torture)
 {
 	int err;
 	struct ubi_wl_entry *e;
@@ -1175,13 +1141,13 @@ retry:
 		return 0;
 	} else {
 		if (in_wl_tree(e, &ubi->used)) {
-			paranoid_check_in_wl_tree(ubi, e, &ubi->used);
+			self_check_in_wl_tree(ubi, e, &ubi->used);
 			rb_erase(&e->u.rb, &ubi->used);
 		} else if (in_wl_tree(e, &ubi->scrub)) {
-			paranoid_check_in_wl_tree(ubi, e, &ubi->scrub);
+			self_check_in_wl_tree(ubi, e, &ubi->scrub);
 			rb_erase(&e->u.rb, &ubi->scrub);
 		} else if (in_wl_tree(e, &ubi->erroneous)) {
-			paranoid_check_in_wl_tree(ubi, e, &ubi->erroneous);
+			self_check_in_wl_tree(ubi, e, &ubi->erroneous);
 			rb_erase(&e->u.rb, &ubi->erroneous);
 			ubi->erroneous_peb_count -= 1;
 			ubi_assert(ubi->erroneous_peb_count >= 0);
@@ -1199,7 +1165,7 @@ retry:
 	}
 	spin_unlock(&ubi->wl_lock);
 
-	err = schedule_erase(ubi, e, torture);
+	err = schedule_erase(ubi, e, vol_id, lnum, torture);
 	if (err) {
 		spin_lock(&ubi->wl_lock);
 		wl_tree_add(e, &ubi->used);
@@ -1248,7 +1214,7 @@ retry:
 	}
 
 	if (in_wl_tree(e, &ubi->used)) {
-		paranoid_check_in_wl_tree(ubi, e, &ubi->used);
+		self_check_in_wl_tree(ubi, e, &ubi->used);
 		rb_erase(&e->u.rb, &ubi->used);
 	} else {
 		int err;
@@ -1275,44 +1241,55 @@ retry:
 /**
  * ubi_wl_flush - flush all pending works.
  * @ubi: UBI device description object
+ * @vol_id: the volume id to flush for
+ * @lnum: the logical eraseblock number to flush for
  *
- * This function returns zero in case of success and a negative error code in
- * case of failure.
+ * This function executes all pending works for a particular volume id /
+ * logical eraseblock number pair. If either value is set to %UBI_ALL, then it
+ * acts as a wildcard for all of the corresponding volume numbers or logical
+ * eraseblock numbers. It returns zero in case of success and a negative error
+ * code in case of failure.
  */
-int ubi_wl_flush(struct ubi_device *ubi)
+int ubi_wl_flush(struct ubi_device *ubi, int vol_id, int lnum)
 {
-	int err;
+	int err = 0;
+	int found = 1;
 
 	/*
 	 * Erase while the pending works queue is not empty, but not more than
 	 * the number of currently pending works.
 	 */
-	dbg_wl("flush (%d pending works)", ubi->works_count);
-	while (ubi->works_count) {
-		err = do_work(ubi);
-		if (err)
-			return err;
-	}
+	dbg_wl("flush pending work for LEB %d:%d (%d pending works)",
+	       vol_id, lnum, ubi->works_count);
 
-	/*
-	 * Make sure all the works which have been done in parallel are
-	 * finished.
-	 */
 	down_write(&ubi->work_sem);
-	up_write(&ubi->work_sem);
+	while (found) {
+		struct ubi_work *wrk;
+		found = 0;
 
-	/*
-	 * And in case last was the WL worker and it canceled the LEB
-	 * movement, flush again.
-	 */
-	while (ubi->works_count) {
-		dbg_wl("flush more (%d pending works)", ubi->works_count);
-		err = do_work(ubi);
-		if (err)
-			return err;
+		spin_lock(&ubi->wl_lock);
+		list_for_each_entry(wrk, &ubi->works, list) {
+			if ((vol_id == UBI_ALL || wrk->vol_id == vol_id) &&
+			    (lnum == UBI_ALL || wrk->lnum == lnum)) {
+				list_del(&wrk->list);
+				ubi->works_count -= 1;
+				ubi_assert(ubi->works_count >= 0);
+				spin_unlock(&ubi->wl_lock);
+
+				err = wrk->func(ubi, wrk, 0);
+				if (err)
+					goto out;
+				spin_lock(&ubi->wl_lock);
+				found = 1;
+				break;
+			}
+		}
+		spin_unlock(&ubi->wl_lock);
 	}
 
-	return 0;
+out:
+	up_write(&ubi->work_sem);
+	return err;
 }
 
 /**
@@ -1421,26 +1398,26 @@ static void cancel_pending(struct ubi_device *ubi)
 }
 
 /**
- * ubi_wl_init_scan - initialize the WL sub-system using scanning information.
+ * ubi_wl_init - initialize the WL sub-system using attaching information.
  * @ubi: UBI device description object
- * @si: scanning information
+ * @ai: attaching information
  *
  * This function returns zero in case of success, and a negative error code in
  * case of failure.
  */
-int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
+int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai)
 {
 	int err, i;
 	struct rb_node *rb1, *rb2;
-	struct ubi_scan_volume *sv;
-	struct ubi_scan_leb *seb, *tmp;
+	struct ubi_ainf_volume *av;
+	struct ubi_ainf_peb *aeb, *tmp;
 	struct ubi_wl_entry *e;
 
 	ubi->used = ubi->erroneous = ubi->free = ubi->scrub = RB_ROOT;
 	spin_lock_init(&ubi->wl_lock);
 	mutex_init(&ubi->move_mutex);
 	init_rwsem(&ubi->work_sem);
-	ubi->max_ec = si->max_ec;
+	ubi->max_ec = ai->max_ec;
 	INIT_LIST_HEAD(&ubi->works);
 
 	sprintf(ubi->bgt_name, UBI_BGT_NAME_PATTERN, ubi->ubi_num);
@@ -1454,48 +1431,48 @@ int ubi_wl_init_scan(struct ubi_device *ubi, struct ubi_scan_info *si)
 		INIT_LIST_HEAD(&ubi->pq[i]);
 	ubi->pq_head = 0;
 
-	list_for_each_entry_safe(seb, tmp, &si->erase, u.list) {
+	list_for_each_entry_safe(aeb, tmp, &ai->erase, u.list) {
 		cond_resched();
 
 		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
 		if (!e)
 			goto out_free;
 
-		e->pnum = seb->pnum;
-		e->ec = seb->ec;
+		e->pnum = aeb->pnum;
+		e->ec = aeb->ec;
 		ubi->lookuptbl[e->pnum] = e;
-		if (schedule_erase(ubi, e, 0)) {
+		if (schedule_erase(ubi, e, aeb->vol_id, aeb->lnum, 0)) {
 			kmem_cache_free(ubi_wl_entry_slab, e);
 			goto out_free;
 		}
 	}
 
-	list_for_each_entry(seb, &si->free, u.list) {
+	list_for_each_entry(aeb, &ai->free, u.list) {
 		cond_resched();
 
 		e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
 		if (!e)
 			goto out_free;
 
-		e->pnum = seb->pnum;
-		e->ec = seb->ec;
+		e->pnum = aeb->pnum;
+		e->ec = aeb->ec;
 		ubi_assert(e->ec >= 0);
 		wl_tree_add(e, &ubi->free);
 		ubi->lookuptbl[e->pnum] = e;
 	}
 
-	ubi_rb_for_each_entry(rb1, sv, &si->volumes, rb) {
-		ubi_rb_for_each_entry(rb2, seb, &sv->root, u.rb) {
+	ubi_rb_for_each_entry(rb1, av, &ai->volumes, rb) {
+		ubi_rb_for_each_entry(rb2, aeb, &av->root, u.rb) {
 			cond_resched();
 
 			e = kmem_cache_alloc(ubi_wl_entry_slab, GFP_KERNEL);
 			if (!e)
 				goto out_free;
 
-			e->pnum = seb->pnum;
-			e->ec = seb->ec;
+			e->pnum = aeb->pnum;
+			e->ec = aeb->ec;
 			ubi->lookuptbl[e->pnum] = e;
-			if (!seb->scrub) {
+			if (!aeb->scrub) {
 				dbg_wl("add PEB %d EC %d to the used tree",
 				       e->pnum, e->ec);
 				wl_tree_add(e, &ubi->used);
@@ -1567,10 +1544,8 @@ void ubi_wl_close(struct ubi_device *ubi)
 	kfree(ubi->lookuptbl);
 }
 
-#ifdef CONFIG_MTD_UBI_DEBUG
-
 /**
- * paranoid_check_ec - make sure that the erase counter of a PEB is correct.
+ * self_check_ec - make sure that the erase counter of a PEB is correct.
  * @ubi: UBI device description object
  * @pnum: the physical eraseblock number to check
  * @ec: the erase counter to check
@@ -1579,7 +1554,7 @@ void ubi_wl_close(struct ubi_device *ubi)
  * is equivalent to @ec, and a negative error code if not or if an error
  * occurred.
  */
-static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec)
+static int self_check_ec(struct ubi_device *ubi, int pnum, int ec)
 {
 	int err;
 	long long read_ec;
@@ -1601,9 +1576,9 @@ static int paranoid_check_ec(struct ubi_device *ubi, int pnum, int ec)
 
 	read_ec = be64_to_cpu(ec_hdr->ec);
 	if (ec != read_ec) {
-		ubi_err("paranoid check failed for PEB %d", pnum);
+		ubi_err("self-check failed for PEB %d", pnum);
 		ubi_err("read EC is %lld, should be %d", read_ec, ec);
-		ubi_dbg_dump_stack();
+		dump_stack();
 		err = 1;
 	} else
 		err = 0;
@@ -1614,7 +1589,7 @@ out_free:
 }
 
 /**
- * paranoid_check_in_wl_tree - check that wear-leveling entry is in WL RB-tree.
+ * self_check_in_wl_tree - check that wear-leveling entry is in WL RB-tree.
  * @ubi: UBI device description object
  * @e: the wear-leveling entry to check
  * @root: the root of the tree
@@ -1622,9 +1597,8 @@ out_free:
  * This function returns zero if @e is in the @root RB-tree and %-EINVAL if it
  * is not.
  */
-static int paranoid_check_in_wl_tree(const struct ubi_device *ubi,
-				     struct ubi_wl_entry *e,
-				     struct rb_root *root)
+static int self_check_in_wl_tree(const struct ubi_device *ubi,
+				 struct ubi_wl_entry *e, struct rb_root *root)
 {
 	if (!ubi->dbg->chk_gen)
 		return 0;
@@ -1632,22 +1606,22 @@ static int paranoid_check_in_wl_tree(const struct ubi_device *ubi,
 	if (in_wl_tree(e, root))
 		return 0;
 
-	ubi_err("paranoid check failed for PEB %d, EC %d, RB-tree %p ",
+	ubi_err("self-check failed for PEB %d, EC %d, RB-tree %p ",
 		e->pnum, e->ec, root);
-	ubi_dbg_dump_stack();
+	dump_stack();
 	return -EINVAL;
 }
 
 /**
- * paranoid_check_in_pq - check if wear-leveling entry is in the protection
+ * self_check_in_pq - check if wear-leveling entry is in the protection
  *                        queue.
  * @ubi: UBI device description object
  * @e: the wear-leveling entry to check
  *
  * This function returns zero if @e is in @ubi->pq and %-EINVAL if it is not.
  */
-static int paranoid_check_in_pq(const struct ubi_device *ubi,
-				struct ubi_wl_entry *e)
+static int self_check_in_pq(const struct ubi_device *ubi,
+			    struct ubi_wl_entry *e)
 {
 	struct ubi_wl_entry *p;
 	int i;
@@ -1660,10 +1634,8 @@ static int paranoid_check_in_pq(const struct ubi_device *ubi,
 			if (p == e)
 				return 0;
 
-	ubi_err("paranoid check failed for PEB %d, EC %d, Protect queue",
+	ubi_err("self-check failed for PEB %d, EC %d, Protect queue",
 		e->pnum, e->ec);
-	ubi_dbg_dump_stack();
+	dump_stack();
 	return -EINVAL;
 }
-
-#endif /* CONFIG_MTD_UBI_DEBUG */
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index b60d6c5f29a0..03df9a8f2bbf 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -75,7 +75,7 @@ config CAN_KVASER_PCI
 	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
 	depends on PCI
 	---help---
-	  This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+	  This driver is for the PCIcanx and PCIcan cards (1, 2 or
 	  4 channel) from Kvaser (http://www.kvaser.com).
 
 config CAN_PLX_PCI
diff --git a/drivers/net/ethernet/3com/typhoon.c b/drivers/net/ethernet/3com/typhoon.c
index 1234a14b2b73..b15366635147 100644
--- a/drivers/net/ethernet/3com/typhoon.c
+++ b/drivers/net/ethernet/3com/typhoon.c
@@ -2549,8 +2549,7 @@ typhoon_init(void)
 static void __exit
 typhoon_cleanup(void)
 {
-	if (typhoon_fw)
-		release_firmware(typhoon_fw);
+	release_firmware(typhoon_fw);
 	pci_unregister_driver(&typhoon_driver);
 }
 
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index d55df3290174..edeeb516807a 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -15883,8 +15883,7 @@ static void __devexit tg3_remove_one(struct pci_dev *pdev)
 	if (dev) {
 		struct tg3 *tp = netdev_priv(dev);
 
-		if (tp->fw)
-			release_firmware(tp->fw);
+		release_firmware(tp->fw);
 
 		tg3_reset_task_cancel(tp);
 
diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index 25c4e7f2a099..67cd2ed0306a 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -3520,9 +3520,7 @@ static void __exit
 bnad_module_exit(void)
 {
 	pci_unregister_driver(&bnad_pci_driver);
-
-	if (bfi_fw)
-		release_firmware(bfi_fw);
+	release_firmware(bfi_fw);
 }
 
 module_init(bnad_module_init);
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
index 0d725dc91bcb..8694124ef77d 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
@@ -1260,8 +1260,7 @@ next:
 void
 netxen_release_firmware(struct netxen_adapter *adapter)
 {
-	if (adapter->fw)
-		release_firmware(adapter->fw);
+	release_firmware(adapter->fw);
 	adapter->fw = NULL;
 }
 
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
index d32cf0ddf1b9..799fd40ed03a 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
@@ -1321,8 +1321,7 @@ next:
 void
 qlcnic_release_firmware(struct qlcnic_adapter *adapter)
 {
-	if (adapter->fw)
-		release_firmware(adapter->fw);
+	release_firmware(adapter->fw);
 	adapter->fw = NULL;
 }
 
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 4f74b9762c29..00b4f56a671c 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -6051,7 +6051,7 @@ static int rtl_open(struct net_device *dev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	/*
-	 * Rx and Tx desscriptors needs 256 bytes alignment.
+	 * Rx and Tx descriptors needs 256 bytes alignment.
 	 * dma_alloc_coherent provides more.
 	 */
 	tp->TxDescArray = dma_alloc_coherent(&pdev->dev, R8169_TX_RING_BYTES,
diff --git a/drivers/net/ethernet/s6gmac.c b/drivers/net/ethernet/s6gmac.c
index 8e9fda0c7aeb..2ed3ab4b3c2d 100644
--- a/drivers/net/ethernet/s6gmac.c
+++ b/drivers/net/ethernet/s6gmac.c
@@ -1,7 +1,7 @@
 /*
  * Ethernet driver for S6105 on chip network device
  * (c)2008 emlix GmbH http://www.emlix.com
- * Authors:	Oskar Schirmer <os@emlix.com>
+ * Authors:	Oskar Schirmer <oskar@scara.com>
  *		Daniel Gloeckner <dg@emlix.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -1070,4 +1070,4 @@ module_exit(s6gmac_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("S6105 on chip Ethernet driver");
-MODULE_AUTHOR("Oskar Schirmer <os@emlix.com>");
+MODULE_AUTHOR("Oskar Schirmer <oskar@scara.com>");
diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c
index 8846516678c3..447a6932cab3 100644
--- a/drivers/net/ethernet/tehuti/tehuti.c
+++ b/drivers/net/ethernet/tehuti/tehuti.c
@@ -341,8 +341,8 @@ static int bdx_fw_load(struct bdx_priv *priv)
 out:
 	if (master)
 		WRITE_REG(priv, regINIT_SEMAPHORE, 1);
-	if (fw)
-		release_firmware(fw);
+
+	release_firmware(fw);
 
 	if (rc) {
 		netdev_err(priv->ndev, "firmware loading failed\n");
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 031d8e8ed1ad..595205406d73 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -316,7 +316,7 @@ config AU1000_FIR
 	tristate "Alchemy IrDA SIR/FIR"
 	depends on IRDA && MIPS_ALCHEMY
 	help
-	  Say Y/M here to build suppor the the IrDA peripheral on the
+	  Say Y/M here to build support the IrDA peripheral on the
 	  Alchemy Au1000 and Au1100 SoCs.
 	  Say M to build a module; it will be called au1k_ir.ko
 
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 72f687b40d66..f9a86bdb12fa 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1671,7 +1671,7 @@ static int irda_usb_probe(struct usb_interface *intf,
 
 	/* Is this really necessary? (no, except maybe for broken devices) */
 	if (usb_reset_configuration (dev) < 0) {
-		err("reset_configuration failed");
+		dev_err(&intf->dev, "reset_configuration failed\n");
 		ret = -EIO;
 		goto err_out_3;
 	}
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index 79aebeee928c..7b4833874ef5 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -134,14 +134,16 @@ static void kingsun_send_irq(struct urb *urb)
 
 	/* in process of stopping, just drop data */
 	if (!netif_running(kingsun->netdev)) {
-		err("kingsun_send_irq: Network not running!");
+		dev_err(&kingsun->usbdev->dev,
+			"kingsun_send_irq: Network not running!\n");
 		return;
 	}
 
 	/* unlink, shutdown, unplug, other nasties */
 	if (urb->status != 0) {
-		err("kingsun_send_irq: urb asynchronously failed - %d",
-		    urb->status);
+		dev_err(&kingsun->usbdev->dev,
+			"kingsun_send_irq: urb asynchronously failed - %d\n",
+			urb->status);
 	}
 	netif_wake_queue(netdev);
 }
@@ -177,7 +179,8 @@ static netdev_tx_t kingsun_hard_xmit(struct sk_buff *skb,
 		kingsun, 1);
 
 	if ((ret = usb_submit_urb(kingsun->tx_urb, GFP_ATOMIC))) {
-		err("kingsun_hard_xmit: failed tx_urb submit: %d", ret);
+		dev_err(&kingsun->usbdev->dev,
+			"kingsun_hard_xmit: failed tx_urb submit: %d\n", ret);
 		switch (ret) {
 		case -ENODEV:
 		case -EPIPE:
@@ -211,8 +214,9 @@ static void kingsun_rcv_irq(struct urb *urb)
 
 	/* unlink, shutdown, unplug, other nasties */
 	if (urb->status != 0) {
-		err("kingsun_rcv_irq: urb asynchronously failed - %d",
-		    urb->status);
+		dev_err(&kingsun->usbdev->dev,
+			"kingsun_rcv_irq: urb asynchronously failed - %d\n",
+			urb->status);
 		kingsun->receiving = 0;
 		return;
 	}
@@ -238,8 +242,9 @@ static void kingsun_rcv_irq(struct urb *urb)
 				? 1 : 0;
 		}
 	} else if (urb->actual_length > 0) {
-		err("%s(): Unexpected response length, expected %d got %d",
-		    __func__, kingsun->max_rx, urb->actual_length);
+		dev_err(&kingsun->usbdev->dev,
+			"%s(): Unexpected response length, expected %d got %d\n",
+			__func__, kingsun->max_rx, urb->actual_length);
 	}
 	/* This urb has already been filled in kingsun_net_open */
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
@@ -286,7 +291,7 @@ static int kingsun_net_open(struct net_device *netdev)
 	sprintf(hwname, "usb#%d", kingsun->usbdev->devnum);
 	kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname);
 	if (!kingsun->irlap) {
-		err("kingsun-sir: irlap_open failed");
+		dev_err(&kingsun->usbdev->dev, "irlap_open failed\n");
 		goto free_mem;
 	}
 
@@ -298,7 +303,8 @@ static int kingsun_net_open(struct net_device *netdev)
 	kingsun->rx_urb->status = 0;
 	err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
 	if (err) {
-		err("kingsun-sir: first urb-submit failed: %d", err);
+		dev_err(&kingsun->usbdev->dev,
+			"first urb-submit failed: %d\n", err);
 		goto close_irlap;
 	}
 
@@ -446,13 +452,15 @@ static int kingsun_probe(struct usb_interface *intf,
 	 */
 	interface = intf->cur_altsetting;
 	if (interface->desc.bNumEndpoints != 2) {
-		err("kingsun-sir: expected 2 endpoints, found %d",
-		    interface->desc.bNumEndpoints);
+		dev_err(&intf->dev,
+			"kingsun-sir: expected 2 endpoints, found %d\n",
+			interface->desc.bNumEndpoints);
 		return -ENODEV;
 	}
 	endpoint = &interface->endpoint[KINGSUN_EP_IN].desc;
 	if (!usb_endpoint_is_int_in(endpoint)) {
-		err("kingsun-sir: endpoint 0 is not interrupt IN");
+		dev_err(&intf->dev,
+			"kingsun-sir: endpoint 0 is not interrupt IN\n");
 		return -ENODEV;
 	}
 
@@ -460,14 +468,16 @@ static int kingsun_probe(struct usb_interface *intf,
 	pipe = usb_rcvintpipe(dev, ep_in);
 	maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
 	if (maxp_in > 255 || maxp_in <= 1) {
-		err("%s: endpoint 0 has max packet size %d not in range",
-		    __FILE__, maxp_in);
+		dev_err(&intf->dev,
+			"endpoint 0 has max packet size %d not in range\n",
+			maxp_in);
 		return -ENODEV;
 	}
 
 	endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc;
 	if (!usb_endpoint_is_int_out(endpoint)) {
-		err("kingsun-sir: endpoint 1 is not interrupt OUT");
+		dev_err(&intf->dev,
+			"kingsun-sir: endpoint 1 is not interrupt OUT\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c
index abe689dffc72..824e2a93fe8a 100644
--- a/drivers/net/irda/ks959-sir.c
+++ b/drivers/net/irda/ks959-sir.c
@@ -247,8 +247,9 @@ static void ks959_speed_irq(struct urb *urb)
 {
 	/* unlink, shutdown, unplug, other nasties */
 	if (urb->status != 0) {
-		err("ks959_speed_irq: urb asynchronously failed - %d",
-		    urb->status);
+		dev_err(&urb->dev->dev,
+			"ks959_speed_irq: urb asynchronously failed - %d\n",
+			urb->status);
 	}
 }
 
@@ -332,14 +333,16 @@ static void ks959_send_irq(struct urb *urb)
 
 	/* in process of stopping, just drop data */
 	if (!netif_running(kingsun->netdev)) {
-		err("ks959_send_irq: Network not running!");
+		dev_err(&kingsun->usbdev->dev,
+			"ks959_send_irq: Network not running!\n");
 		return;
 	}
 
 	/* unlink, shutdown, unplug, other nasties */
 	if (urb->status != 0) {
-		err("ks959_send_irq: urb asynchronously failed - %d",
-		    urb->status);
+		dev_err(&kingsun->usbdev->dev,
+			"ks959_send_irq: urb asynchronously failed - %d\n",
+			urb->status);
 		return;
 	}
 
@@ -358,8 +361,9 @@ static void ks959_send_irq(struct urb *urb)
 		if (kingsun->tx_buf_clear_used > 0) {
 			/* There is more data to be sent */
 			if ((ret = ks959_submit_tx_fragment(kingsun)) != 0) {
-				err("ks959_send_irq: failed tx_urb submit: %d",
-				    ret);
+				dev_err(&kingsun->usbdev->dev,
+					"ks959_send_irq: failed tx_urb submit: %d\n",
+					ret);
 				switch (ret) {
 				case -ENODEV:
 				case -EPIPE:
@@ -407,7 +411,8 @@ static netdev_tx_t ks959_hard_xmit(struct sk_buff *skb,
 	kingsun->tx_buf_clear_used = wraplen;
 
 	if ((ret = ks959_submit_tx_fragment(kingsun)) != 0) {
-		err("ks959_hard_xmit: failed tx_urb submit: %d", ret);
+		dev_err(&kingsun->usbdev->dev,
+			"ks959_hard_xmit: failed tx_urb submit: %d\n", ret);
 		switch (ret) {
 		case -ENODEV:
 		case -EPIPE:
@@ -442,8 +447,9 @@ static void ks959_rcv_irq(struct urb *urb)
 
 	/* unlink, shutdown, unplug, other nasties */
 	if (urb->status != 0) {
-		err("kingsun_rcv_irq: urb asynchronously failed - %d",
-		    urb->status);
+		dev_err(&kingsun->usbdev->dev,
+			"kingsun_rcv_irq: urb asynchronously failed - %d\n",
+			urb->status);
 		kingsun->receiving = 0;
 		return;
 	}
@@ -536,7 +542,7 @@ static int ks959_net_open(struct net_device *netdev)
 	sprintf(hwname, "usb#%d", kingsun->usbdev->devnum);
 	kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname);
 	if (!kingsun->irlap) {
-		err("ks959-sir: irlap_open failed");
+		dev_err(&kingsun->usbdev->dev, "irlap_open failed\n");
 		goto free_mem;
 	}
 
@@ -549,7 +555,8 @@ static int ks959_net_open(struct net_device *netdev)
 	kingsun->rx_urb->status = 0;
 	err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
 	if (err) {
-		err("ks959-sir: first urb-submit failed: %d", err);
+		dev_err(&kingsun->usbdev->dev,
+			"first urb-submit failed: %d\n", err);
 		goto close_irlap;
 	}
 
diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c
index f8c01088eeb7..5a278ab83c2f 100644
--- a/drivers/net/irda/ksdazzle-sir.c
+++ b/drivers/net/irda/ksdazzle-sir.c
@@ -168,10 +168,10 @@ struct ksdazzle_cb {
 static void ksdazzle_speed_irq(struct urb *urb)
 {
 	/* unlink, shutdown, unplug, other nasties */
-	if (urb->status != 0) {
-		err("ksdazzle_speed_irq: urb asynchronously failed - %d",
-		    urb->status);
-	}
+	if (urb->status != 0)
+		dev_err(&urb->dev->dev,
+			"ksdazzle_speed_irq: urb asynchronously failed - %d\n",
+			urb->status);
 }
 
 /* Send a control request to change speed of the dongle */
@@ -245,14 +245,16 @@ static void ksdazzle_send_irq(struct urb *urb)
 
 	/* in process of stopping, just drop data */
 	if (!netif_running(kingsun->netdev)) {
-		err("ksdazzle_send_irq: Network not running!");
+		dev_err(&kingsun->usbdev->dev,
+			"ksdazzle_send_irq: Network not running!\n");
 		return;
 	}
 
 	/* unlink, shutdown, unplug, other nasties */
 	if (urb->status != 0) {
-		err("ksdazzle_send_irq: urb asynchronously failed - %d",
-		    urb->status);
+		dev_err(&kingsun->usbdev->dev,
+			"ksdazzle_send_irq: urb asynchronously failed - %d\n",
+			urb->status);
 		return;
 	}
 
@@ -271,7 +273,9 @@ static void ksdazzle_send_irq(struct urb *urb)
 		if (kingsun->tx_buf_clear_used > 0) {
 			/* There is more data to be sent */
 			if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) {
-				err("ksdazzle_send_irq: failed tx_urb submit: %d", ret);
+				dev_err(&kingsun->usbdev->dev,
+					"ksdazzle_send_irq: failed tx_urb submit: %d\n",
+					ret);
 				switch (ret) {
 				case -ENODEV:
 				case -EPIPE:
@@ -320,7 +324,8 @@ static netdev_tx_t ksdazzle_hard_xmit(struct sk_buff *skb,
 	kingsun->tx_buf_clear_used = wraplen;
 
 	if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) {
-		err("ksdazzle_hard_xmit: failed tx_urb submit: %d", ret);
+		dev_err(&kingsun->usbdev->dev,
+			"ksdazzle_hard_xmit: failed tx_urb submit: %d\n", ret);
 		switch (ret) {
 		case -ENODEV:
 		case -EPIPE:
@@ -355,8 +360,9 @@ static void ksdazzle_rcv_irq(struct urb *urb)
 
 	/* unlink, shutdown, unplug, other nasties */
 	if (urb->status != 0) {
-		err("ksdazzle_rcv_irq: urb asynchronously failed - %d",
-		    urb->status);
+		dev_err(&kingsun->usbdev->dev,
+			"ksdazzle_rcv_irq: urb asynchronously failed - %d\n",
+			urb->status);
 		kingsun->receiving = 0;
 		return;
 	}
@@ -430,7 +436,7 @@ static int ksdazzle_net_open(struct net_device *netdev)
 	sprintf(hwname, "usb#%d", kingsun->usbdev->devnum);
 	kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname);
 	if (!kingsun->irlap) {
-		err("ksdazzle-sir: irlap_open failed");
+		dev_err(&kingsun->usbdev->dev, "irlap_open failed\n");
 		goto free_mem;
 	}
 
@@ -442,7 +448,7 @@ static int ksdazzle_net_open(struct net_device *netdev)
 	kingsun->rx_urb->status = 0;
 	err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
 	if (err) {
-		err("ksdazzle-sir: first urb-submit failed: %d", err);
+		dev_err(&kingsun->usbdev->dev, "first urb-submit failed: %d\n", err);
 		goto close_irlap;
 	}
 
@@ -590,13 +596,14 @@ static int ksdazzle_probe(struct usb_interface *intf,
 	 */
 	interface = intf->cur_altsetting;
 	if (interface->desc.bNumEndpoints != 2) {
-		err("ksdazzle: expected 2 endpoints, found %d",
-		    interface->desc.bNumEndpoints);
+		dev_err(&intf->dev, "ksdazzle: expected 2 endpoints, found %d\n",
+			interface->desc.bNumEndpoints);
 		return -ENODEV;
 	}
 	endpoint = &interface->endpoint[KINGSUN_EP_IN].desc;
 	if (!usb_endpoint_is_int_in(endpoint)) {
-		err("ksdazzle: endpoint 0 is not interrupt IN");
+		dev_err(&intf->dev,
+			"ksdazzle: endpoint 0 is not interrupt IN\n");
 		return -ENODEV;
 	}
 
@@ -604,13 +611,16 @@ static int ksdazzle_probe(struct usb_interface *intf,
 	pipe = usb_rcvintpipe(dev, ep_in);
 	maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
 	if (maxp_in > 255 || maxp_in <= 1) {
-		err("ksdazzle: endpoint 0 has max packet size %d not in range [2..255]", maxp_in);
+		dev_err(&intf->dev,
+			"ksdazzle: endpoint 0 has max packet size %d not in range [2..255]\n",
+			maxp_in);
 		return -ENODEV;
 	}
 
 	endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc;
 	if (!usb_endpoint_is_int_out(endpoint)) {
-		err("ksdazzle: endpoint 1 is not interrupt OUT");
+		dev_err(&intf->dev,
+			"ksdazzle: endpoint 1 is not interrupt OUT\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
index e6e59a078ef4..876e709b65ba 100644
--- a/drivers/net/irda/stir4200.c
+++ b/drivers/net/irda/stir4200.c
@@ -904,7 +904,7 @@ static int stir_net_open(struct net_device *netdev)
 	sprintf(hwname, "usb#%d", stir->usbdev->devnum);
 	stir->irlap = irlap_open(netdev, &stir->qos, hwname);
 	if (!stir->irlap) {
-		err("stir4200: irlap_open failed");
+		dev_err(&stir->usbdev->dev, "irlap_open failed\n");
 		goto err_out5;
 	}
 
@@ -913,7 +913,7 @@ static int stir_net_open(struct net_device *netdev)
 				   "%s", stir->netdev->name);
         if (IS_ERR(stir->thread)) {
                 err = PTR_ERR(stir->thread);
-		err("stir4200: unable to start kernel thread");
+		dev_err(&stir->usbdev->dev, "unable to start kernel thread\n");
 		goto err_out6;
 	}
 
@@ -1042,7 +1042,7 @@ static int stir_probe(struct usb_interface *intf,
 
 	ret = usb_reset_configuration(dev);
 	if (ret != 0) {
-		err("stir4200: usb reset configuration failed");
+		dev_err(&intf->dev, "usb reset configuration failed\n");
 		goto err_out2;
 	}
 
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 42b5151aa78a..71e2b0523bc2 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1647,6 +1647,7 @@ static struct usb_driver asix_driver = {
 	.resume =	usbnet_resume,
 	.disconnect =	usbnet_disconnect,
 	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(asix_driver);
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 182cfb4aeb1d..26c5bebd9eca 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -338,16 +338,18 @@ static void catc_irq_done(struct urb *urb)
 		} else {
 			catc->rx_urb->dev = catc->usbdev;
 			if ((res = usb_submit_urb(catc->rx_urb, GFP_ATOMIC)) < 0) {
-				err("submit(rx_urb) status %d", res);
+				dev_err(&catc->usbdev->dev,
+					"submit(rx_urb) status %d\n", res);
 			}
 		} 
 	}
 resubmit:
 	res = usb_submit_urb (urb, GFP_ATOMIC);
 	if (res)
-		err ("can't resubmit intr, %s-%s, status %d",
-				catc->usbdev->bus->bus_name,
-				catc->usbdev->devpath, res);
+		dev_err(&catc->usbdev->dev,
+			"can't resubmit intr, %s-%s, status %d\n",
+			catc->usbdev->bus->bus_name,
+			catc->usbdev->devpath, res);
 }
 
 /*
@@ -366,7 +368,8 @@ static int catc_tx_run(struct catc *catc)
 	catc->tx_urb->dev = catc->usbdev;
 
 	if ((status = usb_submit_urb(catc->tx_urb, GFP_ATOMIC)) < 0)
-		err("submit(tx_urb), status %d", status);
+		dev_err(&catc->usbdev->dev, "submit(tx_urb), status %d\n",
+			status);
 
 	catc->tx_idx = !catc->tx_idx;
 	catc->tx_ptr = 0;
@@ -496,7 +499,8 @@ static void catc_ctrl_run(struct catc *catc)
 		memcpy(catc->ctrl_buf, q->buf, q->len);
 
 	if ((status = usb_submit_urb(catc->ctrl_urb, GFP_ATOMIC)))
-		err("submit(ctrl_urb) status %d", status);
+		dev_err(&catc->usbdev->dev, "submit(ctrl_urb) status %d\n",
+			status);
 }
 
 static void catc_ctrl_done(struct urb *urb)
@@ -555,7 +559,7 @@ static int catc_ctrl_async(struct catc *catc, u8 dir, u8 request, u16 value,
 	catc->ctrl_head = (catc->ctrl_head + 1) & (CTRL_QUEUE - 1);
 
 	if (catc->ctrl_head == catc->ctrl_tail) {
-		err("ctrl queue full");
+		dev_err(&catc->usbdev->dev, "ctrl queue full\n");
 		catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
 		retval = -1;
 	}
@@ -714,7 +718,8 @@ static int catc_open(struct net_device *netdev)
 
 	catc->irq_urb->dev = catc->usbdev;
 	if ((status = usb_submit_urb(catc->irq_urb, GFP_KERNEL)) < 0) {
-		err("submit(irq_urb) status %d", status);
+		dev_err(&catc->usbdev->dev, "submit(irq_urb) status %d\n",
+			status);
 		return -1;
 	}
 
@@ -769,7 +774,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	if (usb_set_interface(usbdev,
 			intf->altsetting->desc.bInterfaceNumber, 1)) {
-                err("Can't set altsetting 1.");
+                dev_err(&intf->dev, "Can't set altsetting 1.\n");
 		return -EIO;
 	}
 
@@ -799,7 +804,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id
 	catc->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if ((!catc->ctrl_urb) || (!catc->tx_urb) || 
 	    (!catc->rx_urb) || (!catc->irq_urb)) {
-		err("No free urbs available.");
+		dev_err(&intf->dev, "No free urbs available.\n");
 		usb_free_urb(catc->ctrl_urb);
 		usb_free_urb(catc->tx_urb);
 		usb_free_urb(catc->rx_urb);
@@ -947,6 +952,7 @@ static struct usb_driver catc_driver = {
 	.probe =	catc_probe,
 	.disconnect =	catc_disconnect,
 	.id_table =	catc_id_table,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(catc_driver);
diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c
index 3e41b00c6806..d848d4dd5754 100644
--- a/drivers/net/usb/cdc-phonet.c
+++ b/drivers/net/usb/cdc-phonet.c
@@ -457,6 +457,7 @@ static struct usb_driver usbpn_driver = {
 	.probe =	usbpn_probe,
 	.disconnect =	usbpn_disconnect,
 	.id_table =	usbpn_ids,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(usbpn_driver);
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 685a4e22c768..434d5af8e6fb 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -368,6 +368,7 @@ static struct usb_driver eem_driver = {
 	.disconnect =	usbnet_disconnect,
 	.suspend =	usbnet_suspend,
 	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(eem_driver);
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index fffee6aee8bb..a03de7197049 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -705,6 +705,7 @@ static struct usb_driver cdc_driver = {
 	.resume =	usbnet_resume,
 	.reset_resume =	usbnet_resume,
 	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(cdc_driver);
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 7adc9f6b0ea1..4b9513fcf275 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1212,6 +1212,7 @@ static struct usb_driver cdc_ncm_driver = {
 	.resume = usbnet_resume,
 	.reset_resume =	usbnet_resume,
 	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 static const struct ethtool_ops cdc_ncm_ethtool_ops = {
diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c
index b403d934e4e3..0d1fe89ae0bd 100644
--- a/drivers/net/usb/cdc_subset.c
+++ b/drivers/net/usb/cdc_subset.c
@@ -336,6 +336,7 @@ static struct usb_driver cdc_subset_driver = {
 	.resume =	usbnet_resume,
 	.disconnect =	usbnet_disconnect,
 	.id_table =	products,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(cdc_subset_driver);
diff --git a/drivers/net/usb/cx82310_eth.c b/drivers/net/usb/cx82310_eth.c
index 0e0531356e62..49ab45e17fe8 100644
--- a/drivers/net/usb/cx82310_eth.c
+++ b/drivers/net/usb/cx82310_eth.c
@@ -327,6 +327,7 @@ static struct usb_driver cx82310_driver = {
 	.disconnect	= usbnet_disconnect,
 	.suspend	= usbnet_suspend,
 	.resume		= usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(cx82310_driver);
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index b97226318ea5..e0433ce6ced7 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -670,6 +670,7 @@ static struct usb_driver dm9601_driver = {
 	.disconnect = usbnet_disconnect,
 	.suspend = usbnet_suspend,
 	.resume = usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(dm9601_driver);
diff --git a/drivers/net/usb/gl620a.c b/drivers/net/usb/gl620a.c
index 38266bdae26b..db3c8021f2a3 100644
--- a/drivers/net/usb/gl620a.c
+++ b/drivers/net/usb/gl620a.c
@@ -225,6 +225,7 @@ static struct usb_driver gl620a_driver = {
 	.disconnect =	usbnet_disconnect,
 	.suspend =	usbnet_suspend,
 	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(gl620a_driver);
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 2d2a6882ba33..62f30b46fa42 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -106,13 +106,6 @@
 
 #define MAX_RX_URBS			2
 
-static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty)
-{
-	if (tty)
-		return tty->driver_data;
-	return NULL;
-}
-
 /*****************************************************************************/
 /* Debugging functions                                                       */
 /*****************************************************************************/
@@ -255,9 +248,8 @@ struct hso_serial {
 	u8 dtr_state;
 	unsigned tx_urb_used:1;
 
+	struct tty_port port;
 	/* from usb_serial_port */
-	struct tty_struct *tty;
-	int open_count;
 	spinlock_t serial_lock;
 
 	int (*write_data) (struct hso_serial *serial);
@@ -1114,7 +1106,7 @@ static void hso_init_termios(struct ktermios *termios)
 static void _hso_serial_set_termios(struct tty_struct *tty,
 				    struct ktermios *old)
 {
-	struct hso_serial *serial = get_serial_by_tty(tty);
+	struct hso_serial *serial = tty->driver_data;
 	struct ktermios *termios;
 
 	if (!serial) {
@@ -1190,7 +1182,7 @@ static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
 	struct urb *urb;
 
 	urb = serial->rx_urb[0];
-	if (serial->open_count > 0) {
+	if (serial->port.count > 0) {
 		count = put_rxbuf_data(urb, serial);
 		if (count == -1)
 			return;
@@ -1226,7 +1218,7 @@ static void hso_std_serial_read_bulk_callback(struct urb *urb)
 	DUMP1(urb->transfer_buffer, urb->actual_length);
 
 	/* Anyone listening? */
-	if (serial->open_count == 0)
+	if (serial->port.count == 0)
 		return;
 
 	if (status == 0) {
@@ -1268,7 +1260,7 @@ static void hso_unthrottle_tasklet(struct hso_serial *serial)
 
 static	void hso_unthrottle(struct tty_struct *tty)
 {
-	struct hso_serial *serial = get_serial_by_tty(tty);
+	struct hso_serial *serial = tty->driver_data;
 
 	tasklet_hi_schedule(&serial->unthrottle_tasklet);
 }
@@ -1304,15 +1296,12 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp)
 	kref_get(&serial->parent->ref);
 
 	/* setup */
-	spin_lock_irq(&serial->serial_lock);
 	tty->driver_data = serial;
-	tty_kref_put(serial->tty);
-	serial->tty = tty_kref_get(tty);
-	spin_unlock_irq(&serial->serial_lock);
+	tty_port_tty_set(&serial->port, tty);
 
 	/* check for port already opened, if not set the termios */
-	serial->open_count++;
-	if (serial->open_count == 1) {
+	serial->port.count++;
+	if (serial->port.count == 1) {
 		serial->rx_state = RX_IDLE;
 		/* Force default termio settings */
 		_hso_serial_set_termios(tty, NULL);
@@ -1324,7 +1313,7 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp)
 		result = hso_start_serial_device(serial->parent, GFP_KERNEL);
 		if (result) {
 			hso_stop_serial_device(serial->parent);
-			serial->open_count--;
+			serial->port.count--;
 			kref_put(&serial->parent->ref, hso_serial_ref_free);
 		}
 	} else {
@@ -1361,17 +1350,11 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
 
 	/* reset the rts and dtr */
 	/* do the actual close */
-	serial->open_count--;
+	serial->port.count--;
 
-	if (serial->open_count <= 0) {
-		serial->open_count = 0;
-		spin_lock_irq(&serial->serial_lock);
-		if (serial->tty == tty) {
-			serial->tty->driver_data = NULL;
-			serial->tty = NULL;
-			tty_kref_put(tty);
-		}
-		spin_unlock_irq(&serial->serial_lock);
+	if (serial->port.count <= 0) {
+		serial->port.count = 0;
+		tty_port_tty_set(&serial->port, NULL);
 		if (!usb_gone)
 			hso_stop_serial_device(serial->parent);
 		tasklet_kill(&serial->unthrottle_tasklet);
@@ -1390,7 +1373,7 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
 static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
 			    int count)
 {
-	struct hso_serial *serial = get_serial_by_tty(tty);
+	struct hso_serial *serial = tty->driver_data;
 	int space, tx_bytes;
 	unsigned long flags;
 
@@ -1422,7 +1405,7 @@ out:
 /* how much room is there for writing */
 static int hso_serial_write_room(struct tty_struct *tty)
 {
-	struct hso_serial *serial = get_serial_by_tty(tty);
+	struct hso_serial *serial = tty->driver_data;
 	int room;
 	unsigned long flags;
 
@@ -1437,7 +1420,7 @@ static int hso_serial_write_room(struct tty_struct *tty)
 /* setup the term */
 static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 {
-	struct hso_serial *serial = get_serial_by_tty(tty);
+	struct hso_serial *serial = tty->driver_data;
 	unsigned long flags;
 
 	if (old)
@@ -1446,7 +1429,7 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 
 	/* the actual setup */
 	spin_lock_irqsave(&serial->serial_lock, flags);
-	if (serial->open_count)
+	if (serial->port.count)
 		_hso_serial_set_termios(tty, old);
 	else
 		tty->termios = old;
@@ -1458,7 +1441,7 @@ static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 /* how many characters in the buffer */
 static int hso_serial_chars_in_buffer(struct tty_struct *tty)
 {
-	struct hso_serial *serial = get_serial_by_tty(tty);
+	struct hso_serial *serial = tty->driver_data;
 	int chars;
 	unsigned long flags;
 
@@ -1629,7 +1612,7 @@ static int hso_get_count(struct tty_struct *tty,
 		  struct serial_icounter_struct *icount)
 {
 	struct uart_icount cnow;
-	struct hso_serial *serial = get_serial_by_tty(tty);
+	struct hso_serial *serial = tty->driver_data;
 	struct hso_tiocmget  *tiocmget = serial->tiocmget;
 
 	memset(icount, 0, sizeof(struct serial_icounter_struct));
@@ -1659,7 +1642,7 @@ static int hso_get_count(struct tty_struct *tty,
 static int hso_serial_tiocmget(struct tty_struct *tty)
 {
 	int retval;
-	struct hso_serial *serial = get_serial_by_tty(tty);
+	struct hso_serial *serial = tty->driver_data;
 	struct hso_tiocmget  *tiocmget;
 	u16 UART_state_bitmap;
 
@@ -1693,7 +1676,7 @@ static int hso_serial_tiocmset(struct tty_struct *tty,
 	int val = 0;
 	unsigned long flags;
 	int if_num;
-	struct hso_serial *serial = get_serial_by_tty(tty);
+	struct hso_serial *serial = tty->driver_data;
 
 	/* sanity check */
 	if (!serial) {
@@ -1733,7 +1716,7 @@ static int hso_serial_tiocmset(struct tty_struct *tty,
 static int hso_serial_ioctl(struct tty_struct *tty,
 			    unsigned int cmd, unsigned long arg)
 {
-	struct hso_serial *serial =  get_serial_by_tty(tty);
+	struct hso_serial *serial = tty->driver_data;
 	int ret = 0;
 	D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
 
@@ -1905,7 +1888,7 @@ static void intr_callback(struct urb *urb)
 				D1("Pending read interrupt on port %d\n", i);
 				spin_lock(&serial->serial_lock);
 				if (serial->rx_state == RX_IDLE &&
-					serial->open_count > 0) {
+					serial->port.count > 0) {
 					/* Setup and send a ctrl req read on
 					 * port i */
 					if (!serial->rx_urb_filled[0]) {
@@ -1954,14 +1937,13 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb)
 
 	spin_lock(&serial->serial_lock);
 	serial->tx_urb_used = 0;
-	tty = tty_kref_get(serial->tty);
 	spin_unlock(&serial->serial_lock);
 	if (status) {
 		handle_usb_error(status, __func__, serial->parent);
-		tty_kref_put(tty);
 		return;
 	}
 	hso_put_activity(serial->parent);
+	tty = tty_port_tty_get(&serial->port);
 	if (tty) {
 		tty_wakeup(tty);
 		tty_kref_put(tty);
@@ -2001,7 +1983,6 @@ static void ctrl_callback(struct urb *urb)
 	struct hso_serial *serial = urb->context;
 	struct usb_ctrlrequest *req;
 	int status = urb->status;
-	struct tty_struct *tty;
 
 	/* sanity check */
 	if (!serial)
@@ -2009,11 +1990,9 @@ static void ctrl_callback(struct urb *urb)
 
 	spin_lock(&serial->serial_lock);
 	serial->tx_urb_used = 0;
-	tty = tty_kref_get(serial->tty);
 	spin_unlock(&serial->serial_lock);
 	if (status) {
 		handle_usb_error(status, __func__, serial->parent);
-		tty_kref_put(tty);
 		return;
 	}
 
@@ -2031,13 +2010,15 @@ static void ctrl_callback(struct urb *urb)
 		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
 		spin_unlock(&serial->serial_lock);
 	} else {
+		struct tty_struct *tty = tty_port_tty_get(&serial->port);
 		hso_put_activity(serial->parent);
-		if (tty)
+		if (tty) {
 			tty_wakeup(tty);
+			tty_kref_put(tty);
+		}
 		/* response to a write command */
 		hso_kick_transmit(serial);
 	}
-	tty_kref_put(tty);
 }
 
 /* handle RX data for serial port */
@@ -2053,8 +2034,7 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
 		return -2;
 	}
 
-	/* All callers to put_rxbuf_data hold serial_lock */
-	tty = tty_kref_get(serial->tty);
+	tty = tty_port_tty_get(&serial->port);
 
 	/* Push data to tty */
 	if (tty) {
@@ -2074,12 +2054,12 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
 			write_length_remaining -= curr_write_len;
 			tty_flip_buffer_push(tty);
 		}
+		tty_kref_put(tty);
 	}
 	if (write_length_remaining == 0) {
 		serial->curr_rx_urb_offset = 0;
 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
 	}
-	tty_kref_put(tty);
 	return write_length_remaining;
 }
 
@@ -2320,6 +2300,7 @@ static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
 	serial->minor = minor;
 	serial->magic = HSO_SERIAL_MAGIC;
 	spin_lock_init(&serial->serial_lock);
+	tty_port_init(&serial->port);
 	serial->num_rx_urbs = num_urbs;
 
 	/* RX, allocate urb and initialize */
@@ -3098,7 +3079,7 @@ static int hso_resume(struct usb_interface *iface)
 	/* Start all serial ports */
 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
 		if (serial_table[i] && (serial_table[i]->interface == iface)) {
-			if (dev2ser(serial_table[i])->open_count) {
+			if (dev2ser(serial_table[i])->port.count) {
 				result =
 				    hso_start_serial_device(serial_table[i], GFP_NOIO);
 				hso_kick_transmit(dev2ser(serial_table[i]));
@@ -3172,13 +3153,12 @@ static void hso_free_interface(struct usb_interface *interface)
 		if (serial_table[i] &&
 		    (serial_table[i]->interface == interface)) {
 			hso_dev = dev2ser(serial_table[i]);
-			spin_lock_irq(&hso_dev->serial_lock);
-			tty = tty_kref_get(hso_dev->tty);
-			spin_unlock_irq(&hso_dev->serial_lock);
-			if (tty)
+			tty = tty_port_tty_get(&hso_dev->port);
+			if (tty) {
 				tty_hangup(tty);
+				tty_kref_put(tty);
+			}
 			mutex_lock(&hso_dev->parent->mutex);
-			tty_kref_put(tty);
 			hso_dev->parent->usb_gone = 1;
 			mutex_unlock(&hso_dev->parent->mutex);
 			kref_put(&serial_table[i]->ref, hso_serial_ref_free);
@@ -3291,6 +3271,7 @@ static struct usb_driver hso_driver = {
 	.resume = hso_resume,
 	.reset_resume = hso_resume,
 	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 static int __init hso_init(void)
@@ -3312,7 +3293,6 @@ static int __init hso_init(void)
 		return -ENOMEM;
 
 	/* fill in all needed values */
-	tty_drv->magic = TTY_DRIVER_MAGIC;
 	tty_drv->driver_name = driver_name;
 	tty_drv->name = tty_filename;
 
@@ -3333,7 +3313,7 @@ static int __init hso_init(void)
 	if (result) {
 		printk(KERN_ERR "%s - tty_register_driver failed(%d)\n",
 			__func__, result);
-		return result;
+		goto err_free_tty;
 	}
 
 	/* register this module as an usb driver */
@@ -3341,13 +3321,16 @@ static int __init hso_init(void)
 	if (result) {
 		printk(KERN_ERR "Could not register hso driver? error: %d\n",
 			result);
-		/* cleanup serial interface */
-		tty_unregister_driver(tty_drv);
-		return result;
+		goto err_unreg_tty;
 	}
 
 	/* done */
 	return 0;
+err_unreg_tty:
+	tty_unregister_driver(tty_drv);
+err_free_tty:
+	put_tty_driver(tty_drv);
+	return result;
 }
 
 static void __exit hso_exit(void)
@@ -3355,6 +3338,7 @@ static void __exit hso_exit(void)
 	printk(KERN_INFO "hso: unloaded\n");
 
 	tty_unregister_driver(tty_drv);
+	put_tty_driver(tty_drv);
 	/* deregister the usb driver */
 	usb_deregister(&hso_driver);
 }
diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c
index 12a22a453ff1..8de641713d5f 100644
--- a/drivers/net/usb/int51x1.c
+++ b/drivers/net/usb/int51x1.c
@@ -236,6 +236,7 @@ static struct usb_driver int51x1_driver = {
 	.disconnect = usbnet_disconnect,
 	.suspend    = usbnet_suspend,
 	.resume     = usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(int51x1_driver);
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index dd78c4cbd459..964031e3da87 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -209,7 +209,8 @@ static void ipheth_rcvbulk_callback(struct urb *urb)
 	case 0:
 		break;
 	default:
-		err("%s: urb status: %d", __func__, status);
+		dev_err(&dev->intf->dev, "%s: urb status: %d\n",
+			__func__, status);
 		return;
 	}
 
@@ -222,7 +223,8 @@ static void ipheth_rcvbulk_callback(struct urb *urb)
 
 	skb = dev_alloc_skb(len);
 	if (!skb) {
-		err("%s: dev_alloc_skb: -ENOMEM", __func__);
+		dev_err(&dev->intf->dev, "%s: dev_alloc_skb: -ENOMEM\n",
+			__func__);
 		dev->net->stats.rx_dropped++;
 		return;
 	}
@@ -251,7 +253,8 @@ static void ipheth_sndbulk_callback(struct urb *urb)
 	    status != -ENOENT &&
 	    status != -ECONNRESET &&
 	    status != -ESHUTDOWN)
-		err("%s: urb status: %d", __func__, status);
+		dev_err(&dev->intf->dev, "%s: urb status: %d\n",
+		__func__, status);
 
 	dev_kfree_skb_irq(dev->tx_skb);
 	netif_wake_queue(dev->net);
@@ -271,7 +274,8 @@ static int ipheth_carrier_set(struct ipheth_device *dev)
 			dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE,
 			IPHETH_CTRL_TIMEOUT);
 	if (retval < 0) {
-		err("%s: usb_control_msg: %d", __func__, retval);
+		dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
+			__func__, retval);
 		return retval;
 	}
 
@@ -308,9 +312,11 @@ static int ipheth_get_macaddr(struct ipheth_device *dev)
 				 IPHETH_CTRL_BUF_SIZE,
 				 IPHETH_CTRL_TIMEOUT);
 	if (retval < 0) {
-		err("%s: usb_control_msg: %d", __func__, retval);
+		dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
+			__func__, retval);
 	} else if (retval < ETH_ALEN) {
-		err("%s: usb_control_msg: short packet: %d bytes",
+		dev_err(&dev->intf->dev,
+			"%s: usb_control_msg: short packet: %d bytes\n",
 			__func__, retval);
 		retval = -EINVAL;
 	} else {
@@ -335,7 +341,8 @@ static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags)
 
 	retval = usb_submit_urb(dev->rx_urb, mem_flags);
 	if (retval)
-		err("%s: usb_submit_urb: %d", __func__, retval);
+		dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
+			__func__, retval);
 	return retval;
 }
 
@@ -396,7 +403,8 @@ static int ipheth_tx(struct sk_buff *skb, struct net_device *net)
 
 	retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC);
 	if (retval) {
-		err("%s: usb_submit_urb: %d", __func__, retval);
+		dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
+			__func__, retval);
 		dev->net->stats.tx_errors++;
 		dev_kfree_skb_irq(skb);
 	} else {
@@ -414,7 +422,7 @@ static void ipheth_tx_timeout(struct net_device *net)
 {
 	struct ipheth_device *dev = netdev_priv(net);
 
-	err("%s: TX timeout", __func__);
+	dev_err(&dev->intf->dev, "%s: TX timeout\n", __func__);
 	dev->net->stats.tx_errors++;
 	usb_unlink_urb(dev->tx_urb);
 }
@@ -464,7 +472,7 @@ static int ipheth_probe(struct usb_interface *intf,
 	hintf = usb_altnum_to_altsetting(intf, IPHETH_ALT_INTFNUM);
 	if (hintf == NULL) {
 		retval = -ENODEV;
-		err("Unable to find alternate settings interface");
+		dev_err(&intf->dev, "Unable to find alternate settings interface\n");
 		goto err_endpoints;
 	}
 
@@ -477,7 +485,7 @@ static int ipheth_probe(struct usb_interface *intf,
 	}
 	if (!(dev->bulk_in && dev->bulk_out)) {
 		retval = -ENODEV;
-		err("Unable to find endpoints");
+		dev_err(&intf->dev, "Unable to find endpoints\n");
 		goto err_endpoints;
 	}
 
@@ -495,7 +503,7 @@ static int ipheth_probe(struct usb_interface *intf,
 
 	retval = ipheth_alloc_urbs(dev);
 	if (retval) {
-		err("error allocating urbs: %d", retval);
+		dev_err(&intf->dev, "error allocating urbs: %d\n", retval);
 		goto err_alloc_urbs;
 	}
 
@@ -506,7 +514,7 @@ static int ipheth_probe(struct usb_interface *intf,
 
 	retval = register_netdev(netdev);
 	if (retval) {
-		err("error registering netdev: %d", retval);
+		dev_err(&intf->dev, "error registering netdev: %d\n", retval);
 		retval = -EIO;
 		goto err_register_netdev;
 	}
@@ -546,6 +554,7 @@ static struct usb_driver ipheth_driver = {
 	.probe =	ipheth_probe,
 	.disconnect =	ipheth_disconnect,
 	.id_table =	ipheth_table,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(ipheth_driver);
diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c
index 7562649b3d6b..92c49e0a59ec 100644
--- a/drivers/net/usb/kalmia.c
+++ b/drivers/net/usb/kalmia.c
@@ -372,7 +372,8 @@ static struct usb_driver kalmia_driver = {
 	.probe = usbnet_probe,
 	.disconnect = usbnet_disconnect,
 	.suspend = usbnet_suspend,
-	.resume = usbnet_resume
+	.resume = usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(kalmia_driver);
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index df2a2cf35a99..d8ad55284389 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -179,6 +179,7 @@ static struct usb_driver kaweth_driver = {
 	.resume =	kaweth_resume,
 	.id_table =     usb_klsi_table,
 	.supports_autosuspend =	1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 typedef __u8 eth_addr_t[6];
@@ -400,12 +401,13 @@ static int kaweth_download_firmware(struct kaweth_device *kaweth,
 
 	ret = request_firmware(&fw, fwname, &kaweth->dev->dev);
 	if (ret) {
-		err("Firmware request failed\n");
+		dev_err(&kaweth->intf->dev, "Firmware request failed\n");
 		return ret;
 	}
 
 	if (fw->size > KAWETH_FIRMWARE_BUF_SIZE) {
-		err("Firmware too big: %zu", fw->size);
+		dev_err(&kaweth->intf->dev, "Firmware too big: %zu\n",
+			fw->size);
 		release_firmware(fw);
 		return -ENOSPC;
 	}
@@ -501,9 +503,10 @@ static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf)
 	}
 
 	if (status)
-		err ("can't resubmit intr, %s-%s, status %d",
-				kaweth->dev->bus->bus_name,
-				kaweth->dev->devpath, status);
+		dev_err(&kaweth->intf->dev,
+			"can't resubmit intr, %s-%s, status %d\n",
+			kaweth->dev->bus->bus_name,
+			kaweth->dev->devpath, status);
 }
 
 static void int_callback(struct urb *u)
@@ -576,7 +579,8 @@ static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth,
 			kaweth->suspend_lowmem_rx = 1;
 			schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
 		}
-		err("resubmitting rx_urb %d failed", result);
+		dev_err(&kaweth->intf->dev, "resubmitting rx_urb %d failed\n",
+			result);
 	} else {
 		kaweth->suspend_lowmem_rx = 0;
 	}
@@ -634,20 +638,21 @@ static void kaweth_usb_receive(struct urb *urb)
 	spin_unlock(&kaweth->device_lock);
 
 	if(status && status != -EREMOTEIO && count != 1) {
-		err("%s RX status: %d count: %d packet_len: %d",
-                           net->name,
-			   status,
-			   count,
-			   (int)pkt_len);
+		dev_err(&kaweth->intf->dev,
+			"%s RX status: %d count: %d packet_len: %d\n",
+			net->name, status, count, (int)pkt_len);
 		kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
                 return;
 	}
 
 	if(kaweth->net && (count > 2)) {
 		if(pkt_len > (count - 2)) {
-			err("Packet length too long for USB frame (pkt_len: %x, count: %x)",pkt_len, count);
-			err("Packet len & 2047: %x", pkt_len & 2047);
-			err("Count 2: %x", count2);
+			dev_err(&kaweth->intf->dev,
+				"Packet length too long for USB frame (pkt_len: %x, count: %x)\n",
+				pkt_len, count);
+			dev_err(&kaweth->intf->dev, "Packet len & 2047: %x\n",
+				pkt_len & 2047);
+			dev_err(&kaweth->intf->dev, "Count 2: %x\n", count2);
 		        kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
                         return;
                 }
@@ -686,7 +691,7 @@ static int kaweth_open(struct net_device *net)
 
 	res = usb_autopm_get_interface(kaweth->intf);
 	if (res) {
-		err("Interface cannot be resumed.");
+		dev_err(&kaweth->intf->dev, "Interface cannot be resumed.\n");
 		return -EIO;
 	}
 	res = kaweth_resubmit_rx_urb(kaweth, GFP_KERNEL);
@@ -907,7 +912,8 @@ static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth)
 				KAWETH_CONTROL_TIMEOUT);
 
 	if(result < 0) {
-		err("Failed to set Rx mode: %d", result);
+		dev_err(&kaweth->intf->dev, "Failed to set Rx mode: %d\n",
+			result);
 	}
 	else {
 		dbg("Set Rx mode to %d", packet_filter_bitmap);
@@ -1045,7 +1051,8 @@ static int kaweth_probe(
 						      "kaweth/new_code.bin",
 						      100,
 						      2)) < 0) {
-			err("Error downloading firmware (%d)", result);
+			dev_err(&intf->dev, "Error downloading firmware (%d)\n",
+				result);
 			goto err_fw;
 		}
 
@@ -1053,7 +1060,9 @@ static int kaweth_probe(
 						      "kaweth/new_code_fix.bin",
 						      100,
 						      3)) < 0) {
-			err("Error downloading firmware fix (%d)", result);
+			dev_err(&intf->dev,
+				"Error downloading firmware fix (%d)\n",
+				result);
 			goto err_fw;
 		}
 
@@ -1061,7 +1070,9 @@ static int kaweth_probe(
 						      "kaweth/trigger_code.bin",
 						      126,
 						      2)) < 0) {
-			err("Error downloading trigger code (%d)", result);
+			dev_err(&intf->dev,
+				"Error downloading trigger code (%d)\n",
+				result);
 			goto err_fw;
 
 		}
@@ -1070,13 +1081,14 @@ static int kaweth_probe(
 						      "kaweth/trigger_code_fix.bin",
 						      126,
 						      3)) < 0) {
-			err("Error downloading trigger code fix (%d)", result);
+			dev_err(&intf->dev, "Error downloading trigger code fix (%d)\n", result);
 			goto err_fw;
 		}
 
 
 		if ((result = kaweth_trigger_firmware(kaweth, 126)) < 0) {
-			err("Error triggering firmware (%d)", result);
+			dev_err(&intf->dev, "Error triggering firmware (%d)\n",
+				result);
 			goto err_fw;
 		}
 
@@ -1091,7 +1103,7 @@ err_fw:
 	result = kaweth_read_configuration(kaweth);
 
 	if(result < 0) {
-		err("Error reading configuration (%d), no net device created", result);
+		dev_err(&intf->dev, "Error reading configuration (%d), no net device created\n", result);
 		goto err_free_netdev;
 	}
 
@@ -1103,7 +1115,7 @@ err_fw:
 	if(!memcmp(&kaweth->configuration.hw_addr,
                    &bcast_addr,
 		   sizeof(bcast_addr))) {
-		err("Firmware not functioning properly, no net device created");
+		dev_err(&intf->dev, "Firmware not functioning properly, no net device created\n");
 		goto err_free_netdev;
 	}
 
@@ -1113,7 +1125,7 @@ err_fw:
 	}
 
 	if(kaweth_set_sofs_wait(kaweth, KAWETH_SOFS_TO_WAIT) < 0) {
-		err("Error setting SOFS wait");
+		dev_err(&intf->dev, "Error setting SOFS wait\n");
 		goto err_free_netdev;
 	}
 
@@ -1123,7 +1135,7 @@ err_fw:
                                            KAWETH_PACKET_FILTER_MULTICAST);
 
 	if(result < 0) {
-		err("Error setting receive filter");
+		dev_err(&intf->dev, "Error setting receive filter\n");
 		goto err_free_netdev;
 	}
 
@@ -1175,7 +1187,7 @@ err_fw:
 
 	SET_NETDEV_DEV(netdev, &intf->dev);
 	if (register_netdev(netdev) != 0) {
-		err("Error registering netdev.");
+		dev_err(&intf->dev, "Error registering netdev.\n");
 		goto err_intfdata;
 	}
 
diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c
index 45a981fde43f..808d6506da41 100644
--- a/drivers/net/usb/lg-vl600.c
+++ b/drivers/net/usb/lg-vl600.c
@@ -344,6 +344,7 @@ static struct usb_driver lg_vl600_driver = {
 	.disconnect	= usbnet_disconnect,
 	.suspend	= usbnet_suspend,
 	.resume		= usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(lg_vl600_driver);
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index c434b6ba0337..add1064f755d 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -690,6 +690,7 @@ static struct usb_driver mcs7830_driver = {
 	.suspend = usbnet_suspend,
 	.resume = usbnet_resume,
 	.reset_resume = mcs7830_reset_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(mcs7830_driver);
diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c
index 83f965cb69e7..28c4d513ba85 100644
--- a/drivers/net/usb/net1080.c
+++ b/drivers/net/usb/net1080.c
@@ -587,6 +587,7 @@ static struct usb_driver net1080_driver = {
 	.disconnect =	usbnet_disconnect,
 	.suspend =	usbnet_suspend,
 	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(net1080_driver);
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 752393092325..7023220456c5 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1489,6 +1489,7 @@ static struct usb_driver pegasus_driver = {
 	.id_table = pegasus_ids,
 	.suspend = pegasus_suspend,
 	.resume = pegasus_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 static void __init parse_id(char *id)
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index b2b035e29978..4584b9a805b3 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@@ -152,6 +152,7 @@ static struct usb_driver plusb_driver = {
 	.disconnect =	usbnet_disconnect,
 	.suspend =	usbnet_suspend,
 	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(plusb_driver);
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 63cfd0b2c31a..380dbea6109d 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -560,6 +560,7 @@ static struct usb_driver qmi_wwan_driver = {
 	.resume		      =	qmi_wwan_resume,
 	.reset_resume         = qmi_wwan_resume,
 	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 static int __init qmi_wwan_init(void)
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 0d746b3fdef1..4a4335833c36 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -638,6 +638,7 @@ static struct usb_driver rndis_driver = {
 	.disconnect =	usbnet_disconnect,
 	.suspend =	usbnet_suspend,
 	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(rndis_driver);
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index d363b31053da..0e2c92e0e532 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -203,7 +203,8 @@ static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size)
 	if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) {
 		if (ret == -ENODEV)
 			netif_device_detach(dev->netdev);
-		err("control request submission failed: %d", ret);
+		dev_err(&dev->udev->dev,
+			"control request submission failed: %d\n", ret);
 	} else
 		set_bit(RX_REG_SET, &dev->flags);
 
@@ -516,9 +517,9 @@ resubmit:
 	if (res == -ENODEV)
 		netif_device_detach(dev->netdev);
 	else if (res)
-		err ("can't resubmit intr, %s-%s/input0, status %d",
-				dev->udev->bus->bus_name,
-				dev->udev->devpath, res);
+		dev_err(&dev->udev->dev,
+			"can't resubmit intr, %s-%s/input0, status %d\n",
+			dev->udev->bus->bus_name, dev->udev->devpath, res);
 }
 
 static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
@@ -890,11 +891,11 @@ static int rtl8150_probe(struct usb_interface *intf,
 	dev->intr_interval = 100;	/* 100ms */
 
 	if (!alloc_all_urbs(dev)) {
-		err("out of memory");
+		dev_err(&intf->dev, "out of memory\n");
 		goto out;
 	}
 	if (!rtl8150_reset(dev)) {
-		err("couldn't reset the device");
+		dev_err(&intf->dev, "couldn't reset the device\n");
 		goto out1;
 	}
 	fill_skb_pool(dev);
@@ -903,7 +904,7 @@ static int rtl8150_probe(struct usb_interface *intf,
 	usb_set_intfdata(intf, dev);
 	SET_NETDEV_DEV(netdev, &intf->dev);
 	if (register_netdev(netdev) != 0) {
-		err("couldn't register the device");
+		dev_err(&intf->dev, "couldn't register the device\n");
 		goto out2;
 	}
 
@@ -947,7 +948,8 @@ static struct usb_driver rtl8150_driver = {
 	.disconnect	= rtl8150_disconnect,
 	.id_table	= rtl8150_table,
 	.suspend	= rtl8150_suspend,
-	.resume		= rtl8150_resume
+	.resume		= rtl8150_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(rtl8150_driver);
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index b59cf20c7817..3faef5670d1f 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -982,6 +982,7 @@ static struct usb_driver sierra_net_driver = {
 	.suspend = usbnet_suspend,
 	.resume = usbnet_resume,
 	.no_dynamic_id = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(sierra_net_driver);
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index fb1a087b101d..1c6e51588da7 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -1254,6 +1254,7 @@ static struct usb_driver smsc75xx_driver = {
 	.suspend	= usbnet_suspend,
 	.resume		= usbnet_resume,
 	.disconnect	= usbnet_disconnect,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(smsc75xx_driver);
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 94ae66999f59..b1112e753859 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1297,6 +1297,7 @@ static struct usb_driver smsc95xx_driver = {
 	.suspend	= usbnet_suspend,
 	.resume		= usbnet_resume,
 	.disconnect	= usbnet_disconnect,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(smsc95xx_driver);
diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
index 34db195fb8b0..35c90307d473 100644
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -377,6 +377,7 @@ static struct usb_driver zaurus_driver = {
 	.disconnect =	usbnet_disconnect,
 	.suspend =	usbnet_suspend,
 	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(zaurus_driver);
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index d70ede7a7f96..d58431e99f73 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -203,37 +203,6 @@ config WANXL_BUILD_FIRMWARE
 
 	  You should never need this option, say N.
 
-config PC300
-	tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)"
-	depends on HDLC && PCI && BROKEN
-	---help---
-	  This driver is broken because of struct tty_driver change.
-
-	  Driver for the Cyclades-PC300 synchronous communication boards.
-
-	  These boards provide synchronous serial interfaces to your
-	  Linux box (interfaces currently available are RS-232/V.35, X.21 and
-	  T1/E1). If you wish to support Multilink PPP, please select the
-	  option later and read the file README.mlppp provided by PC300
-	  package.
-
-	  To compile this as a module, choose M here: the module
-	  will be called pc300.
-
-	  If unsure, say N.
-
-config PC300_MLPPP
-	bool "Cyclades-PC300 MLPPP support"
-	depends on PC300 && PPP_MULTILINK && PPP_SYNC_TTY && HDLC_PPP
-	help
-	  Multilink PPP over the PC300 synchronous communication boards.
-
-comment "Cyclades-PC300 MLPPP support is disabled."
-	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
-
-comment "Refer to the file README.mlppp, provided by PC300 package."
-	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
-
 config PC300TOO
 	tristate "Cyclades PC300 RSV/X21 alternative support"
 	depends on HDLC && PCI
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 19d14bc28356..eac709bed7ae 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -17,10 +17,6 @@ obj-$(CONFIG_HDLC_FR)		+= hdlc_fr.o
 obj-$(CONFIG_HDLC_PPP)		+= hdlc_ppp.o
 obj-$(CONFIG_HDLC_X25)		+= hdlc_x25.o
 
-pc300-y				:= pc300_drv.o
-pc300-$(CONFIG_PC300_MLPPP)	+= pc300_tty.o
-pc300-objs			:= $(pc300-y)
-
 obj-$(CONFIG_HOSTESS_SV11)	+= z85230.o	hostess_sv11.o
 obj-$(CONFIG_SEALEVEL_4021)	+= z85230.o	sealevel.o
 obj-$(CONFIG_COSA)		+= cosa.o
@@ -35,7 +31,6 @@ obj-$(CONFIG_SDLA)		+= sdla.o
 obj-$(CONFIG_CYCLADES_SYNC)	+= cycx_drv.o cyclomx.o
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
 obj-$(CONFIG_SBNI)		+= sbni.o
-obj-$(CONFIG_PC300)		+= pc300.o
 obj-$(CONFIG_N2)		+= n2.o
 obj-$(CONFIG_C101)		+= c101.o
 obj-$(CONFIG_WANXL)		+= wanxl.o
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 3df0146b797e..efc162e0b511 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -1955,7 +1955,7 @@ static int at76_hw_scan(struct ieee80211_hw *hw,
 	ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
 
 	if (ret < 0) {
-		err("CMD_SCAN failed: %d", ret);
+		wiphy_err(priv->hw->wiphy, "CMD_SCAN failed: %d\n", ret);
 		goto exit;
 	}
 
@@ -2486,6 +2486,7 @@ static struct usb_driver at76_driver = {
 	.probe = at76_probe,
 	.disconnect = at76_disconnect,
 	.id_table = dev_table,
+	.disable_hub_initiated_lpm = 1,
 };
 
 static int __init at76_mod_init(void)
diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
index ec7f1f5fd1ca..44a795f14da9 100644
--- a/drivers/net/wireless/ath/ath6kl/usb.c
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -1182,6 +1182,7 @@ static struct usb_driver ath6kl_usb_driver = {
 	.disconnect = ath6kl_usb_remove,
 	.id_table = ath6kl_usb_ids,
 	.supports_autosuspend = true,
+	.disable_hub_initiated_lpm = 1,
 };
 
 static int ath6kl_usb_init(void)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index f67cd952e741..aa327adcc3d8 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -1358,6 +1358,7 @@ static struct usb_driver ath9k_hif_usb_driver = {
 #endif
 	.id_table = ath9k_hif_usb_ids,
 	.soft_unbind = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 int ath9k_hif_usb_init(void)
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index 89821e4835c7..888152ce3eca 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -1159,6 +1159,7 @@ static struct usb_driver carl9170_driver = {
 	.resume = carl9170_usb_resume,
 	.reset_resume = carl9170_usb_resume,
 #endif /* CONFIG_PM */
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(carl9170_driver);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 1d67ecf681b7..c5a34ffe6459 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1596,7 +1596,8 @@ static struct usb_driver brcmf_usbdrvr = {
 	.id_table = brcmf_usb_devid_table,
 	.suspend = brcmf_usb_suspend,
 	.resume = brcmf_usb_resume,
-	.supports_autosuspend = 1
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 void brcmf_usb_exit(void)
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 75403e6e3990..cd3b0d400618 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -1011,6 +1011,7 @@ static struct usb_driver if_usb_driver = {
 	.suspend = if_usb_suspend,
 	.resume = if_usb_resume,
 	.reset_resume = if_usb_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(if_usb_driver);
diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c
index 7ced130f4f9e..19a5a92dd779 100644
--- a/drivers/net/wireless/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/libertas_tf/if_usb.c
@@ -920,6 +920,7 @@ static struct usb_driver if_usb_driver = {
 	.id_table = if_usb_table,
 	.suspend = if_usb_suspend,
 	.resume = if_usb_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(if_usb_driver);
diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c
index f634d4582bfe..7f53cea2f205 100644
--- a/drivers/net/wireless/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/orinoco/orinoco_usb.c
@@ -1752,6 +1752,7 @@ static struct usb_driver orinoco_driver = {
 	.probe = ezusb_probe,
 	.disconnect = ezusb_disconnect,
 	.id_table = ezusb_table,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(orinoco_driver);
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index e1eac830e2fc..7f207b6e9552 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -1140,6 +1140,7 @@ static struct usb_driver p54u_driver = {
 	.reset_resume = p54u_resume,
 #endif /* CONFIG_PM */
 	.soft_unbind = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(p54u_driver);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index b91d1bb30b41..c5404eb82b2f 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -3765,6 +3765,7 @@ static struct usb_driver rndis_wlan_driver = {
 	.disconnect =	usbnet_disconnect,
 	.suspend =	usbnet_suspend,
 	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(rndis_wlan_driver);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index c88fd3e61090..669aecdb411d 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1980,6 +1980,7 @@ static struct usb_driver rt2500usb_driver = {
 	.disconnect	= rt2x00usb_disconnect,
 	.suspend	= rt2x00usb_suspend,
 	.resume		= rt2x00usb_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(rt2500usb_driver);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5601302d09ad..bf78317a6adb 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1302,6 +1302,7 @@ static struct usb_driver rt2800usb_driver = {
 	.disconnect	= rt2x00usb_disconnect,
 	.suspend	= rt2x00usb_suspend,
 	.resume		= rt2x00usb_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(rt2800usb_driver);
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 155136691a38..77ccbbc7da41 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2527,6 +2527,7 @@ static struct usb_driver rt73usb_driver = {
 	.disconnect	= rt2x00usb_disconnect,
 	.suspend	= rt2x00usb_suspend,
 	.resume		= rt2x00usb_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(rt73usb_driver);
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index d8114962b0c9..4fb1ca1b86b9 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -1663,6 +1663,7 @@ static struct usb_driver rtl8187_driver = {
 	.id_table	= rtl8187_table,
 	.probe		= rtl8187_probe,
 	.disconnect	= __devexit_p(rtl8187_disconnect),
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(rtl8187_driver);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 7737fb0c6661..d228358e6a40 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -373,6 +373,7 @@ static struct usb_driver rtl8192cu_driver = {
 #ifdef CONFIG_AUTOSUSPEND
 	.supports_autosuspend = 1,
 #endif
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(rtl8192cu_driver);
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index a66b93b7ff9a..48273dd05b63 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -1905,6 +1905,7 @@ static struct usb_driver zd1201_usb = {
 	.id_table = zd1201_table,
 	.suspend = zd1201_suspend,
 	.resume = zd1201_resume,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(zd1201_usb);
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index f766b3e67c6d..af83c43bcdb1 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1542,6 +1542,7 @@ static struct usb_driver driver = {
 	.disconnect	= disconnect,
 	.pre_reset	= pre_reset,
 	.post_reset	= post_reset,
+	.disable_hub_initiated_lpm = 1,
 };
 
 struct workqueue_struct *zd_workqueue;
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index e3b76d409dee..5003458980d3 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -348,7 +348,7 @@ int superio_fixup_irq(struct pci_dev *pcidev)
 		BUG();
 		return -1;
 	}
-	printk("superio_fixup_irq(%s) ven 0x%x dev 0x%x from %p\n",
+	printk("superio_fixup_irq(%s) ven 0x%x dev 0x%x from %pf\n",
 		pci_name(pcidev),
 		pcidev->vendor, pcidev->device,
 		__builtin_return_address(0));
diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c
index 8bef6d60f88b..ee78e0ee6e05 100644
--- a/drivers/parport/parport_amiga.c
+++ b/drivers/parport/parport_amiga.c
@@ -48,23 +48,6 @@ static unsigned char amiga_read_data(struct parport *p)
 	return ciaa.prb;
 }
 
-#if 0
-static unsigned char control_pc_to_amiga(unsigned char control)
-{
-	unsigned char ret = 0;
-
-	if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
-		;
-	if (control & PARPORT_CONTROL_INIT) /* INITP */
-		/* reset connected to cpu reset pin */;
-	if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
-		/* Not connected */;
-	if (control & PARPORT_CONTROL_STROBE) /* Strobe */
-		/* Handled only directly by hardware */;
-	return ret;
-}
-#endif
-
 static unsigned char control_amiga_to_pc(unsigned char control)
 {
 	return PARPORT_CONTROL_SELECT |
@@ -95,25 +78,6 @@ static unsigned char amiga_frob_control( struct parport *p, unsigned char mask,
 	return old;
 }
 
-#if 0 /* currently unused */
-static unsigned char status_pc_to_amiga(unsigned char status)
-{
-	unsigned char ret = 1;
-
-	if (status & PARPORT_STATUS_BUSY) /* Busy */
-		ret &= ~1;
-	if (status & PARPORT_STATUS_ACK) /* Ack */
-		/* handled in hardware */;
-	if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
-		ret |= 2;
-	if (status & PARPORT_STATUS_SELECT) /* select */
-		ret |= 4;
-	if (status & PARPORT_STATUS_ERROR) /* error */
-		/* not connected */;
-	return ret;
-}
-#endif
-
 static unsigned char status_amiga_to_pc(unsigned char status)
 {
 	unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
index 0b28fccec03f..7ad59ac68cf6 100644
--- a/drivers/parport/parport_atari.c
+++ b/drivers/parport/parport_atari.c
@@ -130,15 +130,6 @@ parport_atari_data_forward(struct parport *p)
 static void
 parport_atari_data_reverse(struct parport *p)
 {
-#if 0 /* too dangerous, can kill sound chip */
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/* Soundchip port B as input. */
-	sound_ym.rd_data_reg_sel = 7;
-	sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~0x40;
-	local_irq_restore(flags);
-#endif
 }
 
 static struct parport_operations parport_atari_ops = {
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
index 1c0c642b3e23..7578d79b3688 100644
--- a/drivers/parport/parport_mfc3.c
+++ b/drivers/parport/parport_mfc3.c
@@ -147,25 +147,6 @@ DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
 	return old;
 }
 
-#if 0 /* currently unused */
-static unsigned char status_pc_to_mfc3(unsigned char status)
-{
-	unsigned char ret = 1;
-
-	if (status & PARPORT_STATUS_BUSY) /* Busy */
-		ret &= ~1;
-	if (status & PARPORT_STATUS_ACK) /* Ack */
-		ret |= 8;
-	if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
-		ret |= 2;
-	if (status & PARPORT_STATUS_SELECT) /* select */
-		ret |= 4;
-	if (status & PARPORT_STATUS_ERROR) /* error */
-		ret |= 16;
-	return ret;
-}
-#endif
-
 static unsigned char status_mfc3_to_pc(unsigned char status)
 {
 	unsigned char ret = PARPORT_STATUS_BUSY;
@@ -184,14 +165,6 @@ static unsigned char status_mfc3_to_pc(unsigned char status)
 	return ret;
 }
 
-#if 0 /* currently unused */
-static void mfc3_write_status( struct parport *p, unsigned char status)
-{
-DPRINTK(KERN_DEBUG "write_status %02x\n",status);
-	pia(p)->ppra = (pia(p)->ppra & 0xe0) | status_pc_to_mfc3(status);
-}
-#endif
-
 static unsigned char mfc3_read_status(struct parport *p)
 {
 	unsigned char status;
@@ -201,14 +174,6 @@ DPRINTK(KERN_DEBUG "read_status %02x\n", status);
 	return status;
 }
 
-#if 0 /* currently unused */
-static void mfc3_change_mode( struct parport *p, int m)
-{
-	/* XXX: This port only has one mode, and I am
-	not sure about the corresponding PC-style mode*/
-}
-#endif
-
 static int use_cnt = 0;
 
 static irqreturn_t mfc3_interrupt(int irq, void *dev_id)
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 0cb64f50cecd..5abffe58a9d2 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -197,54 +197,6 @@ static int change_mode(struct parport *p, int m)
 	ECR_WRITE(p, oecr);
 	return 0;
 }
-
-#ifdef CONFIG_PARPORT_1284
-/* Find FIFO lossage; FIFO is reset */
-#if 0
-static int get_fifo_residue(struct parport *p)
-{
-	int residue;
-	int cnfga;
-	const struct parport_pc_private *priv = p->physport->private_data;
-
-	/* Adjust for the contents of the FIFO. */
-	for (residue = priv->fifo_depth; ; residue--) {
-		if (inb(ECONTROL(p)) & 0x2)
-				/* Full up. */
-			break;
-
-		outb(0, FIFO(p));
-	}
-
-	printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
-		residue);
-
-	/* Reset the FIFO. */
-	frob_set_mode(p, ECR_PS2);
-
-	/* Now change to config mode and clean up. FIXME */
-	frob_set_mode(p, ECR_CNF);
-	cnfga = inb(CONFIGA(p));
-	printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
-
-	if (!(cnfga & (1<<2))) {
-		printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
-		residue++;
-	}
-
-	/* Don't care about partial PWords until support is added for
-	 * PWord != 1 byte. */
-
-	/* Back to PS2 mode. */
-	frob_set_mode(p, ECR_PS2);
-
-	DPRINTK(KERN_DEBUG
-	     "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n",
-							inb(ECONTROL(p)));
-	return residue;
-}
-#endif  /*  0 */
-#endif /* IEEE 1284 support */
 #endif /* FIFO support */
 
 /*
@@ -940,234 +892,6 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
 
 	return written;
 }
-
-#if 0
-static size_t parport_pc_ecp_read_block_pio(struct parport *port,
-					     void *buf, size_t length,
-					     int flags)
-{
-	size_t left = length;
-	size_t fifofull;
-	int r;
-	const int fifo = FIFO(port);
-	const struct parport_pc_private *priv = port->physport->private_data;
-	const int fifo_depth = priv->fifo_depth;
-	char *bufp = buf;
-
-	port = port->physport;
-	DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
-	dump_parport_state("enter fcn", port);
-
-	/* Special case: a timeout of zero means we cannot call schedule().
-	 * Also if O_NONBLOCK is set then use the default implementation. */
-	if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
-		return parport_ieee1284_ecp_read_data(port, buf,
-						       length, flags);
-
-	if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
-		/* If the peripheral is allowed to send RLE compressed
-		 * data, it is possible for a byte to expand to 128
-		 * bytes in the FIFO. */
-		fifofull = 128;
-	} else {
-		fifofull = fifo_depth;
-	}
-
-	/* If the caller wants less than a full FIFO's worth of data,
-	 * go through software emulation.  Otherwise we may have to throw
-	 * away data. */
-	if (length < fifofull)
-		return parport_ieee1284_ecp_read_data(port, buf,
-						       length, flags);
-
-	if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
-		/* change to reverse-idle phase (must be in forward-idle) */
-
-		/* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
-		parport_frob_control(port,
-				      PARPORT_CONTROL_AUTOFD
-				      | PARPORT_CONTROL_STROBE,
-				      PARPORT_CONTROL_AUTOFD);
-		parport_pc_data_reverse(port); /* Must be in PS2 mode */
-		udelay(5);
-		/* Event 39: Set nInit low to initiate bus reversal */
-		parport_frob_control(port,
-				      PARPORT_CONTROL_INIT,
-				      0);
-		/* Event 40: Wait for  nAckReverse (PError) to go low */
-		r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
-		if (r) {
-			printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) "
-				"in ecp_read_block_pio\n", port->name, r);
-			return 0;
-		}
-	}
-
-	/* Set up ECP FIFO mode.*/
-/*	parport_pc_frob_control(port,
-				 PARPORT_CONTROL_STROBE |
-				 PARPORT_CONTROL_AUTOFD,
-				 PARPORT_CONTROL_AUTOFD); */
-	r = change_mode(port, ECR_ECP); /* ECP FIFO */
-	if (r)
-		printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
-								port->name);
-
-	port->ieee1284.phase = IEEE1284_PH_REV_DATA;
-
-	/* the first byte must be collected manually */
-	dump_parport_state("pre 43", port);
-	/* Event 43: Wait for nAck to go low */
-	r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
-	if (r) {
-		/* timed out while reading -- no data */
-		printk(KERN_DEBUG "PIO read timed out (initial byte)\n");
-		goto out_no_data;
-	}
-	/* read byte */
-	*bufp++ = inb(DATA(port));
-	left--;
-	dump_parport_state("43-44", port);
-	/* Event 44: nAutoFd (HostAck) goes high to acknowledge */
-	parport_pc_frob_control(port,
-				 PARPORT_CONTROL_AUTOFD,
-				 0);
-	dump_parport_state("pre 45", port);
-	/* Event 45: Wait for nAck to go high */
-	/* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK,
-						PARPORT_STATUS_ACK); */
-	dump_parport_state("post 45", port);
-	r = 0;
-	if (r) {
-		/* timed out while waiting for peripheral to respond to ack */
-		printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
-
-		/* keep hold of the byte we've got already */
-		goto out_no_data;
-	}
-	/* Event 46: nAutoFd (HostAck) goes low to accept more data */
-	parport_pc_frob_control(port,
-				 PARPORT_CONTROL_AUTOFD,
-				 PARPORT_CONTROL_AUTOFD);
-
-
-	dump_parport_state("rev idle", port);
-	/* Do the transfer. */
-	while (left > fifofull) {
-		int ret;
-		unsigned long expire = jiffies + port->cad->timeout;
-		unsigned char ecrval = inb(ECONTROL(port));
-
-		if (need_resched() && time_before(jiffies, expire))
-			/* Can't yield the port. */
-			schedule();
-
-		/* At this point, the FIFO may already be full. In
-		 * that case ECP is already holding back the
-		 * peripheral (assuming proper design) with a delayed
-		 * handshake.  Work fast to avoid a peripheral
-		 * timeout.  */
-
-		if (ecrval & 0x01) {
-			/* FIFO is empty. Wait for interrupt. */
-			dump_parport_state("FIFO empty", port);
-
-			/* Anyone else waiting for the port? */
-			if (port->waithead) {
-				printk(KERN_DEBUG "Somebody wants the port\n");
-				break;
-			}
-
-			/* Clear serviceIntr */
-			ECR_WRITE(port, ecrval & ~(1<<2));
-false_alarm:
-			dump_parport_state("waiting", port);
-			ret = parport_wait_event(port, HZ);
-			DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n",
-									ret);
-			if (ret < 0)
-				break;
-			ret = 0;
-			if (!time_before(jiffies, expire)) {
-				/* Timed out. */
-				dump_parport_state("timeout", port);
-				printk(KERN_DEBUG "PIO read timed out\n");
-				break;
-			}
-			ecrval = inb(ECONTROL(port));
-			if (!(ecrval & (1<<2))) {
-				if (need_resched() &&
-				    time_before(jiffies, expire)) {
-					schedule();
-				}
-				goto false_alarm;
-			}
-
-			/* Depending on how the FIFO threshold was
-			 * set, how long interrupt service took, and
-			 * how fast the peripheral is, we might be
-			 * lucky and have a just filled FIFO. */
-			continue;
-		}
-
-		if (ecrval & 0x02) {
-			/* FIFO is full. */
-			dump_parport_state("FIFO full", port);
-			insb(fifo, bufp, fifo_depth);
-			bufp += fifo_depth;
-			left -= fifo_depth;
-			continue;
-		}
-
-		DPRINTK(KERN_DEBUG
-		  "*** ecp_read_block_pio: reading one byte from the FIFO\n");
-
-		/* FIFO not filled.  We will cycle this loop for a while
-		 * and either the peripheral will fill it faster,
-		 * tripping a fast empty with insb, or we empty it. */
-		*bufp++ = inb(fifo);
-		left--;
-	}
-
-	/* scoop up anything left in the FIFO */
-	while (left && !(inb(ECONTROL(port) & 0x01))) {
-		*bufp++ = inb(fifo);
-		left--;
-	}
-
-	port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
-	dump_parport_state("rev idle2", port);
-
-out_no_data:
-
-	/* Go to forward idle mode to shut the peripheral up (event 47). */
-	parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
-
-	/* event 49: PError goes high */
-	r = parport_wait_peripheral(port,
-				     PARPORT_STATUS_PAPEROUT,
-				     PARPORT_STATUS_PAPEROUT);
-	if (r) {
-		printk(KERN_DEBUG
-			"%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
-			port->name, r);
-	}
-
-	port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
-
-	/* Finish up. */
-	{
-		int lost = get_fifo_residue(port);
-		if (lost)
-			/* Shouldn't happen with compliant peripherals. */
-			printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
-				port->name, lost);
-	}
-
-	dump_parport_state("fwd idle", port);
-	return length - left;
-}
-#endif  /*  0  */
 #endif /* IEEE 1284 support */
 #endif /* Allowed to use FIFO/DMA */
 
@@ -2351,7 +2075,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 
 	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
 	if (p->base_hi && priv->ecr)
-		printk(" (0x%lx)", p->base_hi);
+		printk(KERN_CONT " (0x%lx)", p->base_hi);
 	if (p->irq == PARPORT_IRQ_AUTO) {
 		p->irq = PARPORT_IRQ_NONE;
 		parport_irq_probe(p);
@@ -2362,7 +2086,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		p->irq = PARPORT_IRQ_NONE;
 	}
 	if (p->irq != PARPORT_IRQ_NONE) {
-		printk(", irq %d", p->irq);
+		printk(KERN_CONT ", irq %d", p->irq);
 		priv->ctr_writable |= 0x10;
 
 		if (p->dma == PARPORT_DMA_AUTO) {
@@ -2386,21 +2110,21 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		/* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
 #endif /* IEEE 1284 support */
 		if (p->dma != PARPORT_DMA_NONE) {
-			printk(", dma %d", p->dma);
+			printk(KERN_CONT ", dma %d", p->dma);
 			p->modes |= PARPORT_MODE_DMA;
 		} else
-			printk(", using FIFO");
+			printk(KERN_CONT ", using FIFO");
 	} else
 		/* We can't use the DMA channel after all. */
 		p->dma = PARPORT_DMA_NONE;
 #endif /* Allowed to use FIFO/DMA */
 
-	printk(" [");
+	printk(KERN_CONT " [");
 
 #define printmode(x) \
 	{\
 		if (p->modes & PARPORT_MODE_##x) {\
-			printk("%s%s", f ? "," : "", #x);\
+			printk(KERN_CONT "%s%s", f ? "," : "", #x);\
 			f++;\
 		} \
 	}
@@ -2416,9 +2140,9 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 	}
 #undef printmode
 #ifndef CONFIG_PARPORT_1284
-	printk("(,...)");
+	printk(KERN_CONT "(,...)");
 #endif /* CONFIG_PARPORT_1284 */
-	printk("]\n");
+	printk(KERN_CONT "]\n");
 	if (probedirq != PARPORT_IRQ_NONE)
 		printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
 
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
index 9390a534a2b2..983a2d2df659 100644
--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -82,27 +82,6 @@ static unsigned char parport_sunbpp_read_data(struct parport *p)
 	return sbus_readb(&regs->p_dr);
 }
 
-#if 0
-static void control_pc_to_sunbpp(struct parport *p, unsigned char status)
-{
-	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
-	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
-	unsigned char value_or = sbus_readb(&regs->p_or);
-
-	if (status & PARPORT_CONTROL_STROBE) 
-		value_tcr |= P_TCR_DS;
-	if (status & PARPORT_CONTROL_AUTOFD) 
-		value_or |= P_OR_AFXN;
-	if (status & PARPORT_CONTROL_INIT) 
-		value_or |= P_OR_INIT;
-	if (status & PARPORT_CONTROL_SELECT) 
-		value_or |= P_OR_SLCT_IN;
-
-	sbus_writeb(value_or, &regs->p_or);
-	sbus_writeb(value_tcr, &regs->p_tcr);
-}
-#endif
-
 static unsigned char status_sunbpp_to_pc(struct parport *p)
 {
 	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 6b26666b37f2..c4c1a5444b38 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -1,7 +1,7 @@
 /*-*-linux-c-*-*/
 
 /*
-  Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
+  Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@just42.net>
   Copyright (C) 2008 Peter Gruber <nokos@gmx.net>
   Copyright (C) 2008 Tony Vroon <tony@linx.net>
   Based on earlier work:
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 222ccd872ac5..f5d6d379f2fb 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -451,7 +451,7 @@ static int bq27x00_battery_capacity_level(struct bq27x00_device_info *di,
 }
 
 /*
- * Return the battery Voltage in milivolts
+ * Return the battery Voltage in millivolts
  * Or < 0 if something fails.
  */
 static int bq27x00_battery_voltage(struct bq27x00_device_info *di,
diff --git a/drivers/ps3/ps3av.c b/drivers/ps3/ps3av.c
index a409fa050a1a..93d0a8b7718a 100644
--- a/drivers/ps3/ps3av.c
+++ b/drivers/ps3/ps3av.c
@@ -338,7 +338,7 @@ int ps3av_do_pkt(u32 cid, u16 send_len, size_t usr_buf_size,
 	mutex_unlock(&ps3av->mutex);
 	return 0;
 
-      err:
+err:
 	mutex_unlock(&ps3av->mutex);
 	printk(KERN_ERR "%s: failed cid:%x res:%d\n", __func__, cid, res);
 	return res;
@@ -477,7 +477,6 @@ int ps3av_set_audio_mode(u32 ch, u32 fs, u32 word_bits, u32 format, u32 source)
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(ps3av_set_audio_mode);
 
 static int ps3av_set_videomode(void)
@@ -501,7 +500,7 @@ static void ps3av_set_videomode_packet(u32 id)
 
 	video_mode = &video_mode_table[id & PS3AV_MODE_MASK];
 
-	avb_param.num_of_video_pkt = PS3AV_AVB_NUM_VIDEO;	/* num of head */
+	avb_param.num_of_video_pkt = PS3AV_AVB_NUM_VIDEO; /* num of head */
 	avb_param.num_of_audio_pkt = 0;
 	avb_param.num_of_av_video_pkt = ps3av->av_hw_conf.num_of_hdmi +
 					ps3av->av_hw_conf.num_of_avmulti;
@@ -521,7 +520,7 @@ static void ps3av_set_videomode_packet(u32 id)
 #ifndef PS3AV_HDMI_YUV
 		if (ps3av->av_port[i] == PS3AV_CMD_AVPORT_HDMI_0 ||
 		    ps3av->av_port[i] == PS3AV_CMD_AVPORT_HDMI_1)
-			av_video_cs = RGB8;	/* use RGB for HDMI */
+			av_video_cs = RGB8; /* use RGB for HDMI */
 #endif
 		len += ps3av_cmd_set_av_video_cs(&avb_param.buf[len],
 						 ps3av->av_port[i],
@@ -590,8 +589,8 @@ static void ps3avd(struct work_struct *work)
 #define SHIFT_VESA	8
 
 static const struct {
-	unsigned mask : 19;
-	unsigned id :  4;
+	unsigned mask:19;
+	unsigned id:4;
 } ps3av_preferred_modes[] = {
 	{ PS3AV_RESBIT_WUXGA      << SHIFT_VESA, PS3AV_MODE_WUXGA   },
 	{ PS3AV_RESBIT_1920x1080P << SHIFT_60,   PS3AV_MODE_1080P60 },
@@ -667,7 +666,8 @@ static enum ps3av_mode_num ps3av_hdmi_get_id(struct ps3av_info_monitor *info)
 	return id;
 }
 
-static void ps3av_monitor_info_dump(const struct ps3av_pkt_av_get_monitor_info *monitor_info)
+static void ps3av_monitor_info_dump(
+	const struct ps3av_pkt_av_get_monitor_info *monitor_info)
 {
 	const struct ps3av_info_monitor *info = &monitor_info->info;
 	const struct ps3av_info_audio *audio = info->audio;
@@ -717,8 +717,8 @@ static void ps3av_monitor_info_dump(const struct ps3av_pkt_av_get_monitor_info *
 
 	/* audio block */
 	for (i = 0; i < info->num_of_audio_block; i++) {
-		pr_debug("audio[%d] type: %02x max_ch: %02x fs: %02x sbit: "
-			 "%02x\n",
+		pr_debug(
+			"audio[%d] type: %02x max_ch: %02x fs: %02x sbit: %02x\n",
 			 i, audio->type, audio->max_num_of_ch, audio->fs,
 			 audio->sbit);
 		audio++;
@@ -870,21 +870,18 @@ int ps3av_set_video_mode(int id)
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(ps3av_set_video_mode);
 
 int ps3av_get_auto_mode(void)
 {
 	return ps3av_auto_videomode(&ps3av->av_hw_conf);
 }
-
 EXPORT_SYMBOL_GPL(ps3av_get_auto_mode);
 
 int ps3av_get_mode(void)
 {
 	return ps3av ? ps3av->ps3av_mode : 0;
 }
-
 EXPORT_SYMBOL_GPL(ps3av_get_mode);
 
 /* get resolution by video_mode */
@@ -902,7 +899,6 @@ int ps3av_video_mode2res(u32 id, u32 *xres, u32 *yres)
 	*yres = video_mode_table[id].y;
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(ps3av_video_mode2res);
 
 /* mute */
@@ -911,7 +907,6 @@ int ps3av_video_mute(int mute)
 	return ps3av_set_av_video_mute(mute ? PS3AV_CMD_MUTE_ON
 					    : PS3AV_CMD_MUTE_OFF);
 }
-
 EXPORT_SYMBOL_GPL(ps3av_video_mute);
 
 /* mute analog output only */
@@ -935,7 +930,6 @@ int ps3av_audio_mute(int mute)
 	return ps3av_set_audio_mute(mute ? PS3AV_CMD_MUTE_ON
 					 : PS3AV_CMD_MUTE_OFF);
 }
-
 EXPORT_SYMBOL_GPL(ps3av_audio_mute);
 
 static int __devinit ps3av_probe(struct ps3_system_bus_device *dev)
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 5648dad71fb3..ffdf712f9a67 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -70,7 +70,7 @@ config DP83640_PHY
 	  using the SO_TIMESTAMPING API.
 
 	  In order for this to work, your MAC driver must also
-	  implement the skb_tx_timetamp() function.
+	  implement the skb_tx_timestamp() function.
 
 config PTP_1588_CLOCK_PCH
 	tristate "Intel PCH EG20T as PTP clock"
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 8dc3d9392bfa..4e01a423471b 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -31,54 +31,54 @@
 			TPS65910_SLEEP_CONTROL_EXT_INPUT_EN3 |		\
 			TPS65911_SLEEP_CONTROL_EXT_INPUT_SLEEP)
 
-/* supported VIO voltages in milivolts */
+/* supported VIO voltages in millivolts */
 static const u16 VIO_VSEL_table[] = {
 	1500, 1800, 2500, 3300,
 };
 
 /* VSEL tables for TPS65910 specific LDOs and dcdc's */
 
-/* supported VDD3 voltages in milivolts */
+/* supported VDD3 voltages in millivolts */
 static const u16 VDD3_VSEL_table[] = {
 	5000,
 };
 
-/* supported VDIG1 voltages in milivolts */
+/* supported VDIG1 voltages in millivolts */
 static const u16 VDIG1_VSEL_table[] = {
 	1200, 1500, 1800, 2700,
 };
 
-/* supported VDIG2 voltages in milivolts */
+/* supported VDIG2 voltages in millivolts */
 static const u16 VDIG2_VSEL_table[] = {
 	1000, 1100, 1200, 1800,
 };
 
-/* supported VPLL voltages in milivolts */
+/* supported VPLL voltages in millivolts */
 static const u16 VPLL_VSEL_table[] = {
 	1000, 1100, 1800, 2500,
 };
 
-/* supported VDAC voltages in milivolts */
+/* supported VDAC voltages in millivolts */
 static const u16 VDAC_VSEL_table[] = {
 	1800, 2600, 2800, 2850,
 };
 
-/* supported VAUX1 voltages in milivolts */
+/* supported VAUX1 voltages in millivolts */
 static const u16 VAUX1_VSEL_table[] = {
 	1800, 2500, 2800, 2850,
 };
 
-/* supported VAUX2 voltages in milivolts */
+/* supported VAUX2 voltages in millivolts */
 static const u16 VAUX2_VSEL_table[] = {
 	1800, 2800, 2900, 3300,
 };
 
-/* supported VAUX33 voltages in milivolts */
+/* supported VAUX33 voltages in millivolts */
 static const u16 VAUX33_VSEL_table[] = {
 	1800, 2000, 2800, 3300,
 };
 
-/* supported VMMC voltages in milivolts */
+/* supported VMMC voltages in millivolts */
 static const u16 VMMC_VSEL_table[] = {
 	1800, 2800, 3000, 3300,
 };
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index e756a0df3664..d6f8adaa26ef 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1105,8 +1105,7 @@ static void rproc_fw_config_virtio(const struct firmware *fw, void *context)
 		goto out;
 
 out:
-	if (fw)
-		release_firmware(fw);
+	release_firmware(fw);
 	/* allow rproc_unregister() contexts, if any, to proceed */
 	complete_all(&rproc->firmware_loading_complete);
 }
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 4f9f1dcc1551..6c0116d48c74 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -20,6 +20,7 @@
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/reboot.h>
+#include <linux/serial.h> /* ASYNC_* flags */
 #include <linux/slab.h>
 #include <asm/ccwdev.h>
 #include <asm/cio.h>
@@ -44,14 +45,11 @@
 #define RAW3215_TIMEOUT	    HZ/10     /* time for delayed output */
 
 #define RAW3215_FIXED	    1	      /* 3215 console device is not be freed */
-#define RAW3215_ACTIVE	    2	      /* set if the device is in use */
 #define RAW3215_WORKING	    4	      /* set if a request is being worked on */
 #define RAW3215_THROTTLED   8	      /* set if reading is disabled */
 #define RAW3215_STOPPED	    16	      /* set if writing is disabled */
-#define RAW3215_CLOSING	    32	      /* set while in close process */
 #define RAW3215_TIMER_RUNS  64	      /* set if the output delay timer is on */
 #define RAW3215_FLUSHING    128	      /* set to flush buffer (no delay) */
-#define RAW3215_FROZEN	    256	      /* set if 3215 is frozen for suspend */
 
 #define TAB_STOP_SIZE	    8	      /* tab stop size */
 
@@ -76,6 +74,7 @@ struct raw3215_req {
 } __attribute__ ((aligned(8)));
 
 struct raw3215_info {
+	struct tty_port port;
 	struct ccw_device *cdev;      /* device for tty driver */
 	spinlock_t *lock;	      /* pointer to irq lock */
 	int flags;		      /* state flags */
@@ -84,7 +83,6 @@ struct raw3215_info {
 	int head;		      /* first free byte in output buffer */
 	int count;		      /* number of bytes in output buffer */
 	int written;		      /* number of bytes in write requests */
-	struct tty_struct *tty;	      /* pointer to tty structure if present */
 	struct raw3215_req *queued_read; /* pointer to queued read requests */
 	struct raw3215_req *queued_write;/* pointer to queued write requests */
 	struct tasklet_struct tlet;   /* tasklet to invoke tty_wakeup */
@@ -293,7 +291,7 @@ static void raw3215_timeout(unsigned long __data)
 	if (raw->flags & RAW3215_TIMER_RUNS) {
 		del_timer(&raw->timer);
 		raw->flags &= ~RAW3215_TIMER_RUNS;
-		if (!(raw->flags & RAW3215_FROZEN)) {
+		if (!(raw->port.flags & ASYNC_SUSPENDED)) {
 			raw3215_mk_write_req(raw);
 			raw3215_start_io(raw);
 		}
@@ -309,7 +307,8 @@ static void raw3215_timeout(unsigned long __data)
  */
 static inline void raw3215_try_io(struct raw3215_info *raw)
 {
-	if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FROZEN))
+	if (!(raw->port.flags & ASYNC_INITIALIZED) ||
+			(raw->port.flags & ASYNC_SUSPENDED))
 		return;
 	if (raw->queued_read != NULL)
 		raw3215_start_io(raw);
@@ -324,10 +323,7 @@ static inline void raw3215_try_io(struct raw3215_info *raw)
 			}
 		} else if (!(raw->flags & RAW3215_TIMER_RUNS)) {
 			/* delay small writes */
-			init_timer(&raw->timer);
 			raw->timer.expires = RAW3215_TIMEOUT + jiffies;
-			raw->timer.data = (unsigned long) raw;
-			raw->timer.function = raw3215_timeout;
 			add_timer(&raw->timer);
 			raw->flags |= RAW3215_TIMER_RUNS;
 		}
@@ -340,17 +336,21 @@ static inline void raw3215_try_io(struct raw3215_info *raw)
 static void raw3215_wakeup(unsigned long data)
 {
 	struct raw3215_info *raw = (struct raw3215_info *) data;
-	tty_wakeup(raw->tty);
+	struct tty_struct *tty;
+
+	tty = tty_port_tty_get(&raw->port);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 /*
  * Try to start the next IO and wake up processes waiting on the tty.
  */
-static void raw3215_next_io(struct raw3215_info *raw)
+static void raw3215_next_io(struct raw3215_info *raw, struct tty_struct *tty)
 {
 	raw3215_mk_write_req(raw);
 	raw3215_try_io(raw);
-	if (raw->tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE)
+	if (tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE)
 		tasklet_schedule(&raw->tlet);
 }
 
@@ -368,10 +368,11 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
 
 	raw = dev_get_drvdata(&cdev->dev);
 	req = (struct raw3215_req *) intparm;
+	tty = tty_port_tty_get(&raw->port);
 	cstat = irb->scsw.cmd.cstat;
 	dstat = irb->scsw.cmd.dstat;
 	if (cstat != 0)
-		raw3215_next_io(raw);
+		raw3215_next_io(raw, tty);
 	if (dstat & 0x01) { /* we got a unit exception */
 		dstat &= ~0x01;	 /* we can ignore it */
 	}
@@ -381,13 +382,13 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
 			break;
 		/* Attention interrupt, someone hit the enter key */
 		raw3215_mk_read_req(raw);
-		raw3215_next_io(raw);
+		raw3215_next_io(raw, tty);
 		break;
 	case 0x08:
 	case 0x0C:
 		/* Channel end interrupt. */
 		if ((raw = req->info) == NULL)
-			return;		     /* That shouldn't happen ... */
+			goto put_tty;	     /* That shouldn't happen ... */
 		if (req->type == RAW3215_READ) {
 			/* store residual count, then wait for device end */
 			req->residual = irb->scsw.cmd.count;
@@ -397,11 +398,10 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
 	case 0x04:
 		/* Device end interrupt. */
 		if ((raw = req->info) == NULL)
-			return;		     /* That shouldn't happen ... */
-		if (req->type == RAW3215_READ && raw->tty != NULL) {
+			goto put_tty;	     /* That shouldn't happen ... */
+		if (req->type == RAW3215_READ && tty != NULL) {
 			unsigned int cchar;
 
-			tty = raw->tty;
 			count = 160 - req->residual;
 			EBCASC(raw->inbuf, count);
 			cchar = ctrlchar_handle(raw->inbuf, count, tty);
@@ -411,7 +411,7 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
 
 			case CTRLCHAR_CTRL:
 				tty_insert_flip_char(tty, cchar, TTY_NORMAL);
-				tty_flip_buffer_push(raw->tty);
+				tty_flip_buffer_push(tty);
 				break;
 
 			case CTRLCHAR_NONE:
@@ -424,7 +424,7 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
 				} else
 					count -= 2;
 				tty_insert_flip_string(tty, raw->inbuf, count);
-				tty_flip_buffer_push(raw->tty);
+				tty_flip_buffer_push(tty);
 				break;
 			}
 		} else if (req->type == RAW3215_WRITE) {
@@ -439,7 +439,7 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
 		    raw->queued_read == NULL) {
 			wake_up_interruptible(&raw->empty_wait);
 		}
-		raw3215_next_io(raw);
+		raw3215_next_io(raw, tty);
 		break;
 	default:
 		/* Strange interrupt, I'll do my best to clean up */
@@ -451,9 +451,10 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
 			raw->flags &= ~RAW3215_WORKING;
 			raw3215_free_req(req);
 		}
-		raw3215_next_io(raw);
+		raw3215_next_io(raw, tty);
 	}
-	return;
+put_tty:
+	tty_kref_put(tty);
 }
 
 /*
@@ -487,7 +488,7 @@ static void raw3215_make_room(struct raw3215_info *raw, unsigned int length)
 		/* While console is frozen for suspend we have no other
 		 * choice but to drop message from the buffer to make
 		 * room for even more messages. */
-		if (raw->flags & RAW3215_FROZEN) {
+		if (raw->port.flags & ASYNC_SUSPENDED) {
 			raw3215_drop_line(raw);
 			continue;
 		}
@@ -609,10 +610,10 @@ static int raw3215_startup(struct raw3215_info *raw)
 {
 	unsigned long flags;
 
-	if (raw->flags & RAW3215_ACTIVE)
+	if (raw->port.flags & ASYNC_INITIALIZED)
 		return 0;
 	raw->line_pos = 0;
-	raw->flags |= RAW3215_ACTIVE;
+	raw->port.flags |= ASYNC_INITIALIZED;
 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 	raw3215_try_io(raw);
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
@@ -628,14 +629,15 @@ static void raw3215_shutdown(struct raw3215_info *raw)
 	DECLARE_WAITQUEUE(wait, current);
 	unsigned long flags;
 
-	if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FIXED))
+	if (!(raw->port.flags & ASYNC_INITIALIZED) ||
+			(raw->flags & RAW3215_FIXED))
 		return;
 	/* Wait for outstanding requests, then free irq */
 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 	if ((raw->flags & RAW3215_WORKING) ||
 	    raw->queued_write != NULL ||
 	    raw->queued_read != NULL) {
-		raw->flags |= RAW3215_CLOSING;
+		raw->port.flags |= ASYNC_CLOSING;
 		add_wait_queue(&raw->empty_wait, &wait);
 		set_current_state(TASK_INTERRUPTIBLE);
 		spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
@@ -643,11 +645,41 @@ static void raw3215_shutdown(struct raw3215_info *raw)
 		spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 		remove_wait_queue(&raw->empty_wait, &wait);
 		set_current_state(TASK_RUNNING);
-		raw->flags &= ~(RAW3215_ACTIVE | RAW3215_CLOSING);
+		raw->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING);
 	}
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 }
 
+static struct raw3215_info *raw3215_alloc_info(void)
+{
+	struct raw3215_info *info;
+
+	info = kzalloc(sizeof(struct raw3215_info), GFP_KERNEL | GFP_DMA);
+	if (!info)
+		return NULL;
+
+	info->buffer = kzalloc(RAW3215_BUFFER_SIZE, GFP_KERNEL | GFP_DMA);
+	info->inbuf = kzalloc(RAW3215_INBUF_SIZE, GFP_KERNEL | GFP_DMA);
+	if (!info->buffer || !info->inbuf) {
+		kfree(info);
+		return NULL;
+	}
+
+	setup_timer(&info->timer, raw3215_timeout, (unsigned long)info);
+	init_waitqueue_head(&info->empty_wait);
+	tasklet_init(&info->tlet, raw3215_wakeup, (unsigned long)info);
+	tty_port_init(&info->port);
+
+	return info;
+}
+
+static void raw3215_free_info(struct raw3215_info *raw)
+{
+	kfree(raw->inbuf);
+	kfree(raw->buffer);
+	kfree(raw);
+}
+
 static int raw3215_probe (struct ccw_device *cdev)
 {
 	struct raw3215_info *raw;
@@ -656,11 +688,15 @@ static int raw3215_probe (struct ccw_device *cdev)
 	/* Console is special. */
 	if (raw3215[0] && (raw3215[0] == dev_get_drvdata(&cdev->dev)))
 		return 0;
-	raw = kmalloc(sizeof(struct raw3215_info) +
-		      RAW3215_INBUF_SIZE, GFP_KERNEL|GFP_DMA);
+
+	raw = raw3215_alloc_info();
 	if (raw == NULL)
 		return -ENOMEM;
 
+	raw->cdev = cdev;
+	dev_set_drvdata(&cdev->dev, raw);
+	cdev->handler = raw3215_irq;
+
 	spin_lock(&raw3215_device_lock);
 	for (line = 0; line < NR_3215; line++) {
 		if (!raw3215[line]) {
@@ -670,28 +706,10 @@ static int raw3215_probe (struct ccw_device *cdev)
 	}
 	spin_unlock(&raw3215_device_lock);
 	if (line == NR_3215) {
-		kfree(raw);
+		raw3215_free_info(raw);
 		return -ENODEV;
 	}
 
-	raw->cdev = cdev;
-	raw->inbuf = (char *) raw + sizeof(struct raw3215_info);
-	memset(raw, 0, sizeof(struct raw3215_info));
-	raw->buffer = kmalloc(RAW3215_BUFFER_SIZE,
-				       GFP_KERNEL|GFP_DMA);
-	if (raw->buffer == NULL) {
-		spin_lock(&raw3215_device_lock);
-		raw3215[line] = NULL;
-		spin_unlock(&raw3215_device_lock);
-		kfree(raw);
-		return -ENOMEM;
-	}
-	init_waitqueue_head(&raw->empty_wait);
-	tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw);
-
-	dev_set_drvdata(&cdev->dev, raw);
-	cdev->handler = raw3215_irq;
-
 	return 0;
 }
 
@@ -703,8 +721,7 @@ static void raw3215_remove (struct ccw_device *cdev)
 	raw = dev_get_drvdata(&cdev->dev);
 	if (raw) {
 		dev_set_drvdata(&cdev->dev, NULL);
-		kfree(raw->buffer);
-		kfree(raw);
+		raw3215_free_info(raw);
 	}
 }
 
@@ -741,7 +758,7 @@ static int raw3215_pm_stop(struct ccw_device *cdev)
 	raw = dev_get_drvdata(&cdev->dev);
 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 	raw3215_make_room(raw, RAW3215_BUFFER_SIZE);
-	raw->flags |= RAW3215_FROZEN;
+	raw->port.flags |= ASYNC_SUSPENDED;
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 	return 0;
 }
@@ -754,7 +771,7 @@ static int raw3215_pm_start(struct ccw_device *cdev)
 	/* Allow I/O again and flush output buffer. */
 	raw = dev_get_drvdata(&cdev->dev);
 	spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
-	raw->flags &= ~RAW3215_FROZEN;
+	raw->port.flags &= ~ASYNC_SUSPENDED;
 	raw->flags |= RAW3215_FLUSHING;
 	raw3215_try_io(raw);
 	raw->flags &= ~RAW3215_FLUSHING;
@@ -827,7 +844,7 @@ static void con3215_flush(void)
 	unsigned long flags;
 
 	raw = raw3215[0];  /* console 3215 is the first one */
-	if (raw->flags & RAW3215_FROZEN)
+	if (raw->port.flags & ASYNC_SUSPENDED)
 		/* The console is still frozen for suspend. */
 		if (ccw_device_force_console())
 			/* Forcing didn't work, no panic message .. */
@@ -897,23 +914,16 @@ static int __init con3215_init(void)
 	if (IS_ERR(cdev))
 		return -ENODEV;
 
-	raw3215[0] = raw = (struct raw3215_info *)
-		kzalloc(sizeof(struct raw3215_info), GFP_KERNEL | GFP_DMA);
-	raw->buffer = kzalloc(RAW3215_BUFFER_SIZE, GFP_KERNEL | GFP_DMA);
-	raw->inbuf = kzalloc(RAW3215_INBUF_SIZE, GFP_KERNEL | GFP_DMA);
+	raw3215[0] = raw = raw3215_alloc_info();
 	raw->cdev = cdev;
 	dev_set_drvdata(&cdev->dev, raw);
 	cdev->handler = raw3215_irq;
 
 	raw->flags |= RAW3215_FIXED;
-	init_waitqueue_head(&raw->empty_wait);
-	tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw);
 
 	/* Request the console irq */
 	if (raw3215_startup(raw) != 0) {
-		kfree(raw->inbuf);
-		kfree(raw->buffer);
-		kfree(raw);
+		raw3215_free_info(raw);
 		raw3215[0] = NULL;
 		return -ENODEV;
 	}
@@ -940,7 +950,7 @@ static int tty3215_open(struct tty_struct *tty, struct file * filp)
 		return -ENODEV;
 
 	tty->driver_data = raw;
-	raw->tty = tty;
+	tty_port_tty_set(&raw->port, tty);
 
 	tty->low_latency = 0;  /* don't use bottom half for pushing chars */
 	/*
@@ -971,7 +981,7 @@ static void tty3215_close(struct tty_struct *tty, struct file * filp)
 	raw3215_shutdown(raw);
 	tasklet_kill(&raw->tlet);
 	tty->closing = 0;
-	raw->tty = NULL;
+	tty_port_tty_set(&raw->port, NULL);
 }
 
 /*
diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c
index 806588192483..7ef9cfdc17d8 100644
--- a/drivers/s390/char/keyboard.c
+++ b/drivers/s390/char/keyboard.c
@@ -199,7 +199,7 @@ handle_diacr(struct kbd_data *kbd, unsigned int ch)
 	if (ch == ' ' || ch == d)
 		return d;
 
-	kbd_put_queue(kbd->tty, d);
+	kbd_put_queue(kbd->port, d);
 	return ch;
 }
 
@@ -221,7 +221,7 @@ k_self(struct kbd_data *kbd, unsigned char value)
 {
 	if (kbd->diacr)
 		value = handle_diacr(kbd, value);
-	kbd_put_queue(kbd->tty, value);
+	kbd_put_queue(kbd->port, value);
 }
 
 /*
@@ -239,7 +239,7 @@ static void
 k_fn(struct kbd_data *kbd, unsigned char value)
 {
 	if (kbd->func_table[value])
-		kbd_puts_queue(kbd->tty, kbd->func_table[value]);
+		kbd_puts_queue(kbd->port, kbd->func_table[value]);
 }
 
 static void
@@ -257,20 +257,20 @@ k_spec(struct kbd_data *kbd, unsigned char value)
  * but we need only 16 bits here
  */
 static void
-to_utf8(struct tty_struct *tty, ushort c) 
+to_utf8(struct tty_port *port, ushort c)
 {
 	if (c < 0x80)
 		/*  0******* */
-		kbd_put_queue(tty, c);
+		kbd_put_queue(port, c);
 	else if (c < 0x800) {
 		/* 110***** 10****** */
-		kbd_put_queue(tty, 0xc0 | (c >> 6));
-		kbd_put_queue(tty, 0x80 | (c & 0x3f));
+		kbd_put_queue(port, 0xc0 | (c >> 6));
+		kbd_put_queue(port, 0x80 | (c & 0x3f));
 	} else {
 		/* 1110**** 10****** 10****** */
-		kbd_put_queue(tty, 0xe0 | (c >> 12));
-		kbd_put_queue(tty, 0x80 | ((c >> 6) & 0x3f));
-		kbd_put_queue(tty, 0x80 | (c & 0x3f));
+		kbd_put_queue(port, 0xe0 | (c >> 12));
+		kbd_put_queue(port, 0x80 | ((c >> 6) & 0x3f));
+		kbd_put_queue(port, 0x80 | (c & 0x3f));
 	}
 }
 
@@ -283,7 +283,7 @@ kbd_keycode(struct kbd_data *kbd, unsigned int keycode)
 	unsigned short keysym;
 	unsigned char type, value;
 
-	if (!kbd || !kbd->tty)
+	if (!kbd)
 		return;
 
 	if (keycode >= 384)
@@ -323,7 +323,7 @@ kbd_keycode(struct kbd_data *kbd, unsigned int keycode)
 #endif
 		(*k_handler[type])(kbd, value);
 	} else
-		to_utf8(kbd->tty, keysym);
+		to_utf8(kbd->port, keysym);
 }
 
 /*
@@ -457,6 +457,7 @@ do_kdgkb_ioctl(struct kbd_data *kbd, struct kbsentry __user *u_kbs,
 
 int kbd_ioctl(struct kbd_data *kbd, unsigned int cmd, unsigned long arg)
 {
+	struct tty_struct *tty;
 	void __user *argp;
 	unsigned int ct;
 	int perm;
@@ -467,7 +468,10 @@ int kbd_ioctl(struct kbd_data *kbd, unsigned int cmd, unsigned long arg)
 	 * To have permissions to do most of the vt ioctls, we either have
 	 * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
 	 */
-	perm = current->signal->tty == kbd->tty || capable(CAP_SYS_TTY_CONFIG);
+	tty = tty_port_tty_get(kbd->port);
+	/* FIXME this test is pretty racy */
+	perm = current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG);
+	tty_kref_put(tty);
 	switch (cmd) {
 	case KDGKBTYPE:
 		return put_user(KB_101, (char __user *)argp);
diff --git a/drivers/s390/char/keyboard.h b/drivers/s390/char/keyboard.h
index 7e736aaeae6e..f682f4e49680 100644
--- a/drivers/s390/char/keyboard.h
+++ b/drivers/s390/char/keyboard.h
@@ -21,7 +21,7 @@ typedef void (fn_handler_fn)(struct kbd_data *);
  */
 
 struct kbd_data {
-	struct tty_struct *tty;
+	struct tty_port *port;
 	unsigned short **key_maps;
 	char **func_table;
 	fn_handler_fn **fn_handler;
@@ -42,16 +42,24 @@ int kbd_ioctl(struct kbd_data *, unsigned int, unsigned long);
  * Helper Functions.
  */
 static inline void
-kbd_put_queue(struct tty_struct *tty, int ch)
+kbd_put_queue(struct tty_port *port, int ch)
 {
+	struct tty_struct *tty = tty_port_tty_get(port);
+	if (!tty)
+		return;
 	tty_insert_flip_char(tty, ch, 0);
 	tty_schedule_flip(tty);
+	tty_kref_put(tty);
 }
 
 static inline void
-kbd_puts_queue(struct tty_struct *tty, char *cp)
+kbd_puts_queue(struct tty_port *port, char *cp)
 {
+	struct tty_struct *tty = tty_port_tty_get(port);
+	if (!tty)
+		return;
 	while (*cp)
 		tty_insert_flip_char(tty, *cp++, 0);
 	tty_schedule_flip(tty);
+	tty_kref_put(tty);
 }
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index 40a9d69c898e..e66a75b3822c 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -48,7 +48,7 @@ static struct sclp_buffer *sclp_ttybuf;
 /* Timer for delayed output of console messages. */
 static struct timer_list sclp_tty_timer;
 
-static struct tty_struct *sclp_tty;
+static struct tty_port sclp_port;
 static unsigned char sclp_tty_chars[SCLP_TTY_BUF_SIZE];
 static unsigned short int sclp_tty_chars_count;
 
@@ -64,7 +64,7 @@ static int sclp_tty_columns = 80;
 static int
 sclp_tty_open(struct tty_struct *tty, struct file *filp)
 {
-	sclp_tty = tty;
+	tty_port_tty_set(&sclp_port, tty);
 	tty->driver_data = NULL;
 	tty->low_latency = 0;
 	return 0;
@@ -76,7 +76,7 @@ sclp_tty_close(struct tty_struct *tty, struct file *filp)
 {
 	if (tty->count > 1)
 		return;
-	sclp_tty = NULL;
+	tty_port_tty_set(&sclp_port, NULL);
 }
 
 /*
@@ -108,6 +108,7 @@ sclp_tty_write_room (struct tty_struct *tty)
 static void
 sclp_ttybuf_callback(struct sclp_buffer *buffer, int rc)
 {
+	struct tty_struct *tty;
 	unsigned long flags;
 	void *page;
 
@@ -126,8 +127,10 @@ sclp_ttybuf_callback(struct sclp_buffer *buffer, int rc)
 		spin_unlock_irqrestore(&sclp_tty_lock, flags);
 	} while (buffer && sclp_emit_buffer(buffer, sclp_ttybuf_callback));
 	/* check if the tty needs a wake up call */
-	if (sclp_tty != NULL) {
-		tty_wakeup(sclp_tty);
+	tty = tty_port_tty_get(&sclp_port);
+	if (tty != NULL) {
+		tty_wakeup(tty);
+		tty_kref_put(tty);
 	}
 }
 
@@ -326,21 +329,22 @@ sclp_tty_flush_buffer(struct tty_struct *tty)
 static void
 sclp_tty_input(unsigned char* buf, unsigned int count)
 {
+	struct tty_struct *tty = tty_port_tty_get(&sclp_port);
 	unsigned int cchar;
 
 	/*
 	 * If this tty driver is currently closed
 	 * then throw the received input away.
 	 */
-	if (sclp_tty == NULL)
+	if (tty == NULL)
 		return;
-	cchar = ctrlchar_handle(buf, count, sclp_tty);
+	cchar = ctrlchar_handle(buf, count, tty);
 	switch (cchar & CTRLCHAR_MASK) {
 	case CTRLCHAR_SYSRQ:
 		break;
 	case CTRLCHAR_CTRL:
-		tty_insert_flip_char(sclp_tty, cchar, TTY_NORMAL);
-		tty_flip_buffer_push(sclp_tty);
+		tty_insert_flip_char(tty, cchar, TTY_NORMAL);
+		tty_flip_buffer_push(tty);
 		break;
 	case CTRLCHAR_NONE:
 		/* send (normal) input to line discipline */
@@ -348,13 +352,14 @@ sclp_tty_input(unsigned char* buf, unsigned int count)
 		    (strncmp((const char *) buf + count - 2, "^n", 2) &&
 		     strncmp((const char *) buf + count - 2, "\252n", 2))) {
 			/* add the auto \n */
-			tty_insert_flip_string(sclp_tty, buf, count);
-			tty_insert_flip_char(sclp_tty, '\n', TTY_NORMAL);
+			tty_insert_flip_string(tty, buf, count);
+			tty_insert_flip_char(tty, '\n', TTY_NORMAL);
 		} else
-			tty_insert_flip_string(sclp_tty, buf, count - 2);
-		tty_flip_buffer_push(sclp_tty);
+			tty_insert_flip_string(tty, buf, count - 2);
+		tty_flip_buffer_push(tty);
 		break;
 	}
+	tty_kref_put(tty);
 }
 
 /*
@@ -543,7 +548,7 @@ sclp_tty_init(void)
 		sclp_tty_tolower = 1;
 	}
 	sclp_tty_chars_count = 0;
-	sclp_tty = NULL;
+	tty_port_init(&sclp_port);
 
 	rc = sclp_register(&sclp_input_event);
 	if (rc) {
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index b635472ae660..edfc0fd73dc6 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -34,7 +34,6 @@
 #define SCLP_VT220_DEVICE_NAME		"ttysclp"
 #define SCLP_VT220_CONSOLE_NAME		"ttyS"
 #define SCLP_VT220_CONSOLE_INDEX	1	/* console=ttyS1 */
-#define SCLP_VT220_BUF_SIZE		80
 
 /* Representation of a single write request */
 struct sclp_vt220_request {
@@ -56,8 +55,7 @@ struct sclp_vt220_sccb {
 /* Structures and data needed to register tty driver */
 static struct tty_driver *sclp_vt220_driver;
 
-/* The tty_struct that the kernel associated with us */
-static struct tty_struct *sclp_vt220_tty;
+static struct tty_port sclp_vt220_port;
 
 /* Lock to protect internal data from concurrent access */
 static spinlock_t sclp_vt220_lock;
@@ -116,6 +114,7 @@ static struct sclp_register sclp_vt220_register = {
 static void
 sclp_vt220_process_queue(struct sclp_vt220_request *request)
 {
+	struct tty_struct *tty;
 	unsigned long flags;
 	void *page;
 
@@ -141,8 +140,10 @@ sclp_vt220_process_queue(struct sclp_vt220_request *request)
 	if (request == NULL && sclp_vt220_flush_later)
 		sclp_vt220_emit_current();
 	/* Check if the tty needs a wake up call */
-	if (sclp_vt220_tty != NULL) {
-		tty_wakeup(sclp_vt220_tty);
+	tty = tty_port_tty_get(&sclp_vt220_port);
+	if (tty) {
+		tty_wakeup(tty);
+		tty_kref_put(tty);
 	}
 }
 
@@ -460,11 +461,12 @@ sclp_vt220_write(struct tty_struct *tty, const unsigned char *buf, int count)
 static void
 sclp_vt220_receiver_fn(struct evbuf_header *evbuf)
 {
+	struct tty_struct *tty = tty_port_tty_get(&sclp_vt220_port);
 	char *buffer;
 	unsigned int count;
 
 	/* Ignore input if device is not open */
-	if (sclp_vt220_tty == NULL)
+	if (tty == NULL)
 		return;
 
 	buffer = (char *) ((addr_t) evbuf + sizeof(struct evbuf_header));
@@ -478,10 +480,11 @@ sclp_vt220_receiver_fn(struct evbuf_header *evbuf)
 		/* Send input to line discipline */
 		buffer++;
 		count--;
-		tty_insert_flip_string(sclp_vt220_tty, buffer, count);
-		tty_flip_buffer_push(sclp_vt220_tty);
+		tty_insert_flip_string(tty, buffer, count);
+		tty_flip_buffer_push(tty);
 		break;
 	}
+	tty_kref_put(tty);
 }
 
 /*
@@ -491,10 +494,7 @@ static int
 sclp_vt220_open(struct tty_struct *tty, struct file *filp)
 {
 	if (tty->count == 1) {
-		sclp_vt220_tty = tty;
-		tty->driver_data = kmalloc(SCLP_VT220_BUF_SIZE, GFP_KERNEL);
-		if (tty->driver_data == NULL)
-			return -ENOMEM;
+		tty_port_tty_set(&sclp_vt220_port, tty);
 		tty->low_latency = 0;
 		if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
 			tty->winsize.ws_row = 24;
@@ -510,11 +510,8 @@ sclp_vt220_open(struct tty_struct *tty, struct file *filp)
 static void
 sclp_vt220_close(struct tty_struct *tty, struct file *filp)
 {
-	if (tty->count == 1) {
-		sclp_vt220_tty = NULL;
-		kfree(tty->driver_data);
-		tty->driver_data = NULL;
-	}
+	if (tty->count == 1)
+		tty_port_tty_set(&sclp_vt220_port, NULL);
 }
 
 /*
@@ -635,9 +632,9 @@ static int __init __sclp_vt220_init(int num_pages)
 	INIT_LIST_HEAD(&sclp_vt220_empty);
 	INIT_LIST_HEAD(&sclp_vt220_outqueue);
 	init_timer(&sclp_vt220_timer);
+	tty_port_init(&sclp_vt220_port);
 	sclp_vt220_current_request = NULL;
 	sclp_vt220_buffered_chars = 0;
-	sclp_vt220_tty = NULL;
 	sclp_vt220_flush_later = 0;
 
 	/* Allocate pages for output buffering */
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index b43445a55cb6..10ec690197cb 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -61,7 +61,7 @@ struct tty3270_line {
  */
 struct tty3270 {
 	struct raw3270_view view;
-	struct tty_struct *tty;		/* Pointer to tty structure */
+	struct tty_port port;
 	void **freemem_pages;		/* Array of pages used for freemem. */
 	struct list_head freemem;	/* List of free memory for strings. */
 
@@ -324,9 +324,8 @@ tty3270_blank_line(struct tty3270 *tp)
 static void
 tty3270_write_callback(struct raw3270_request *rq, void *data)
 {
-	struct tty3270 *tp;
+	struct tty3270 *tp = container_of(rq->view, struct tty3270, view);
 
-	tp = (struct tty3270 *) rq->view;
 	if (rq->rc != 0) {
 		/* Write wasn't successful. Refresh all. */
 		tp->update_flags = TTY_UPDATE_ALL;
@@ -450,10 +449,9 @@ tty3270_rcl_add(struct tty3270 *tp, char *input, int len)
 static void
 tty3270_rcl_backward(struct kbd_data *kbd)
 {
-	struct tty3270 *tp;
+	struct tty3270 *tp = container_of(kbd->port, struct tty3270, port);
 	struct string *s;
 
-	tp = kbd->tty->driver_data;
 	spin_lock_bh(&tp->view.lock);
 	if (tp->inattr == TF_INPUT) {
 		if (tp->rcl_walk && tp->rcl_walk->prev != &tp->rcl_lines)
@@ -478,9 +476,8 @@ tty3270_rcl_backward(struct kbd_data *kbd)
 static void
 tty3270_exit_tty(struct kbd_data *kbd)
 {
-	struct tty3270 *tp;
+	struct tty3270 *tp = container_of(kbd->port, struct tty3270, port);
 
-	tp = kbd->tty->driver_data;
 	raw3270_deactivate_view(&tp->view);
 }
 
@@ -490,10 +487,9 @@ tty3270_exit_tty(struct kbd_data *kbd)
 static void
 tty3270_scroll_forward(struct kbd_data *kbd)
 {
-	struct tty3270 *tp;
+	struct tty3270 *tp = container_of(kbd->port, struct tty3270, port);
 	int nr_up;
 
-	tp = kbd->tty->driver_data;
 	spin_lock_bh(&tp->view.lock);
 	nr_up = tp->nr_up - tp->view.rows + 2;
 	if (nr_up < 0)
@@ -513,10 +509,9 @@ tty3270_scroll_forward(struct kbd_data *kbd)
 static void
 tty3270_scroll_backward(struct kbd_data *kbd)
 {
-	struct tty3270 *tp;
+	struct tty3270 *tp = container_of(kbd->port, struct tty3270, port);
 	int nr_up;
 
-	tp = kbd->tty->driver_data;
 	spin_lock_bh(&tp->view.lock);
 	nr_up = tp->nr_up + tp->view.rows - 2;
 	if (nr_up + tp->view.rows - 2 > tp->nr_lines)
@@ -537,11 +532,10 @@ static void
 tty3270_read_tasklet(struct raw3270_request *rrq)
 {
 	static char kreset_data = TW_KR;
-	struct tty3270 *tp;
+	struct tty3270 *tp = container_of(rrq->view, struct tty3270, view);
 	char *input;
 	int len;
 
-	tp = (struct tty3270 *) rrq->view;
 	spin_lock_bh(&tp->view.lock);
 	/*
 	 * Two AID keys are special: For 0x7d (enter) the input line
@@ -577,13 +571,10 @@ tty3270_read_tasklet(struct raw3270_request *rrq)
 	raw3270_request_add_data(tp->kreset, &kreset_data, 1);
 	raw3270_start(&tp->view, tp->kreset);
 
-	/* Emit input string. */
-	if (tp->tty) {
-		while (len-- > 0)
-			kbd_keycode(tp->kbd, *input++);
-		/* Emit keycode for AID byte. */
-		kbd_keycode(tp->kbd, 256 + tp->input->string[0]);
-	}
+	while (len-- > 0)
+		kbd_keycode(tp->kbd, *input++);
+	/* Emit keycode for AID byte. */
+	kbd_keycode(tp->kbd, 256 + tp->input->string[0]);
 
 	raw3270_request_reset(rrq);
 	xchg(&tp->read, rrq);
@@ -596,9 +587,10 @@ tty3270_read_tasklet(struct raw3270_request *rrq)
 static void
 tty3270_read_callback(struct raw3270_request *rq, void *data)
 {
+	struct tty3270 *tp = container_of(rq->view, struct tty3270, view);
 	raw3270_get_view(rq->view);
 	/* Schedule tasklet to pass input to tty. */
-	tasklet_schedule(&((struct tty3270 *) rq->view)->readlet);
+	tasklet_schedule(&tp->readlet);
 }
 
 /*
@@ -635,9 +627,8 @@ tty3270_issue_read(struct tty3270 *tp, int lock)
 static int
 tty3270_activate(struct raw3270_view *view)
 {
-	struct tty3270 *tp;
+	struct tty3270 *tp = container_of(view, struct tty3270, view);
 
-	tp = (struct tty3270 *) view;
 	tp->update_flags = TTY_UPDATE_ALL;
 	tty3270_set_timer(tp, 1);
 	return 0;
@@ -646,9 +637,8 @@ tty3270_activate(struct raw3270_view *view)
 static void
 tty3270_deactivate(struct raw3270_view *view)
 {
-	struct tty3270 *tp;
+	struct tty3270 *tp = container_of(view, struct tty3270, view);
 
-	tp = (struct tty3270 *) view;
 	del_timer(&tp->timer);
 }
 
@@ -690,6 +680,17 @@ tty3270_alloc_view(void)
 	if (!tp->freemem_pages)
 		goto out_tp;
 	INIT_LIST_HEAD(&tp->freemem);
+	INIT_LIST_HEAD(&tp->lines);
+	INIT_LIST_HEAD(&tp->update);
+	INIT_LIST_HEAD(&tp->rcl_lines);
+	tp->rcl_max = 20;
+	tty_port_init(&tp->port);
+	setup_timer(&tp->timer, (void (*)(unsigned long)) tty3270_update,
+		    (unsigned long) tp);
+	tasklet_init(&tp->readlet,
+		     (void (*)(unsigned long)) tty3270_read_tasklet,
+		     (unsigned long) tp->read);
+
 	for (pages = 0; pages < TTY3270_STRING_PAGES; pages++) {
 		tp->freemem_pages[pages] = (void *)
 			__get_free_pages(GFP_KERNEL|GFP_DMA, 0);
@@ -794,16 +795,15 @@ tty3270_free_screen(struct tty3270 *tp)
 static void
 tty3270_release(struct raw3270_view *view)
 {
-	struct tty3270 *tp;
-	struct tty_struct *tty;
+	struct tty3270 *tp = container_of(view, struct tty3270, view);
+	struct tty_struct *tty = tty_port_tty_get(&tp->port);
 
-	tp = (struct tty3270 *) view;
-	tty = tp->tty;
 	if (tty) {
 		tty->driver_data = NULL;
-		tp->tty = tp->kbd->tty = NULL;
+		tty_port_tty_set(&tp->port, NULL);
 		tty_hangup(tty);
 		raw3270_put_view(&tp->view);
+		tty_kref_put(tty);
 	}
 }
 
@@ -813,8 +813,9 @@ tty3270_release(struct raw3270_view *view)
 static void
 tty3270_free(struct raw3270_view *view)
 {
-	tty3270_free_screen((struct tty3270 *) view);
-	tty3270_free_view((struct tty3270 *) view);
+	struct tty3270 *tp = container_of(view, struct tty3270, view);
+	tty3270_free_screen(tp);
+	tty3270_free_view(tp);
 }
 
 /*
@@ -823,14 +824,13 @@ tty3270_free(struct raw3270_view *view)
 static void
 tty3270_del_views(void)
 {
-	struct tty3270 *tp;
 	int i;
 
 	for (i = 0; i < tty3270_max_index; i++) {
-		tp = (struct tty3270 *)
+		struct raw3270_view *view =
 			raw3270_find_view(&tty3270_fn, i + RAW3270_FIRSTMINOR);
-		if (!IS_ERR(tp))
-			raw3270_del_view(&tp->view);
+		if (!IS_ERR(view))
+			raw3270_del_view(view);
 	}
 }
 
@@ -848,22 +848,23 @@ static struct raw3270_fn tty3270_fn = {
 static int
 tty3270_open(struct tty_struct *tty, struct file * filp)
 {
+	struct raw3270_view *view;
 	struct tty3270 *tp;
 	int i, rc;
 
 	if (tty->count > 1)
 		return 0;
 	/* Check if the tty3270 is already there. */
-	tp = (struct tty3270 *)
-		raw3270_find_view(&tty3270_fn,
+	view = raw3270_find_view(&tty3270_fn,
 				  tty->index + RAW3270_FIRSTMINOR);
-	if (!IS_ERR(tp)) {
+	if (!IS_ERR(view)) {
+		tp = container_of(view, struct tty3270, view);
 		tty->driver_data = tp;
 		tty->winsize.ws_row = tp->view.rows - 2;
 		tty->winsize.ws_col = tp->view.cols;
 		tty->low_latency = 0;
-		tp->tty = tty;
-		tp->kbd->tty = tty;
+		/* why to reassign? */
+		tty_port_tty_set(&tp->port, tty);
 		tp->inattr = TF_INPUT;
 		return 0;
 	}
@@ -871,7 +872,7 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
 		tty3270_max_index = tty->index + 1;
 
 	/* Quick exit if there is no device for tty->index. */
-	if (PTR_ERR(tp) == -ENODEV)
+	if (PTR_ERR(view) == -ENODEV)
 		return -ENODEV;
 
 	/* Allocate tty3270 structure on first open. */
@@ -879,16 +880,6 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
 	if (IS_ERR(tp))
 		return PTR_ERR(tp);
 
-	INIT_LIST_HEAD(&tp->lines);
-	INIT_LIST_HEAD(&tp->update);
-	INIT_LIST_HEAD(&tp->rcl_lines);
-	tp->rcl_max = 20;
-	setup_timer(&tp->timer, (void (*)(unsigned long)) tty3270_update,
-		    (unsigned long) tp);
-	tasklet_init(&tp->readlet, 
-		     (void (*)(unsigned long)) tty3270_read_tasklet,
-		     (unsigned long) tp->read);
-
 	rc = raw3270_add_view(&tp->view, &tty3270_fn,
 			      tty->index + RAW3270_FIRSTMINOR);
 	if (rc) {
@@ -903,7 +894,7 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
 		return rc;
 	}
 
-	tp->tty = tty;
+	tty_port_tty_set(&tp->port, tty);
 	tty->low_latency = 0;
 	tty->driver_data = tp;
 	tty->winsize.ws_row = tp->view.rows - 2;
@@ -917,7 +908,7 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
 	for (i = 0; i < tp->view.rows - 2; i++)
 		tty3270_blank_line(tp);
 
-	tp->kbd->tty = tty;
+	tp->kbd->port = &tp->port;
 	tp->kbd->fn_handler[KVAL(K_INCRCONSOLE)] = tty3270_exit_tty;
 	tp->kbd->fn_handler[KVAL(K_SCROLLBACK)] = tty3270_scroll_backward;
 	tp->kbd->fn_handler[KVAL(K_SCROLLFORW)] = tty3270_scroll_forward;
@@ -935,14 +926,13 @@ tty3270_open(struct tty_struct *tty, struct file * filp)
 static void
 tty3270_close(struct tty_struct *tty, struct file * filp)
 {
-	struct tty3270 *tp;
+	struct tty3270 *tp = tty->driver_data;
 
 	if (tty->count > 1)
 		return;
-	tp = (struct tty3270 *) tty->driver_data;
 	if (tp) {
 		tty->driver_data = NULL;
-		tp->tty = tp->kbd->tty = NULL;
+		tty_port_tty_set(&tp->port, NULL);
 		raw3270_put_view(&tp->view);
 	}
 }
@@ -1391,7 +1381,7 @@ tty3270_escape_sequence(struct tty3270 *tp, char ch)
 			tty3270_lf(tp);
 			break;
 		case 'Z':		/* Respond ID. */
-			kbd_puts_queue(tp->tty, "\033[?6c");
+			kbd_puts_queue(&tp->port, "\033[?6c");
 			break;
 		case '7':		/* Save cursor position. */
 			tp->saved_cx = tp->cx;
@@ -1437,11 +1427,11 @@ tty3270_escape_sequence(struct tty3270 *tp, char ch)
 	tp->esc_state = ESnormal;
 	if (ch == 'n' && !tp->esc_ques) {
 		if (tp->esc_par[0] == 5)		/* Status report. */
-			kbd_puts_queue(tp->tty, "\033[0n");
+			kbd_puts_queue(&tp->port, "\033[0n");
 		else if (tp->esc_par[0] == 6) {	/* Cursor report. */
 			char buf[40];
 			sprintf(buf, "\033[%d;%dR", tp->cy + 1, tp->cx + 1);
-			kbd_puts_queue(tp->tty, buf);
+			kbd_puts_queue(&tp->port, buf);
 		}
 		return;
 	}
@@ -1513,12 +1503,13 @@ tty3270_escape_sequence(struct tty3270 *tp, char ch)
  * String write routine for 3270 ttys
  */
 static void
-tty3270_do_write(struct tty3270 *tp, const unsigned char *buf, int count)
+tty3270_do_write(struct tty3270 *tp, struct tty_struct *tty,
+		const unsigned char *buf, int count)
 {
 	int i_msg, i;
 
 	spin_lock_bh(&tp->view.lock);
-	for (i_msg = 0; !tp->tty->stopped && i_msg < count; i_msg++) {
+	for (i_msg = 0; !tty->stopped && i_msg < count; i_msg++) {
 		if (tp->esc_state != 0) {
 			/* Continue escape sequence. */
 			tty3270_escape_sequence(tp, buf[i_msg]);
@@ -1595,10 +1586,10 @@ tty3270_write(struct tty_struct * tty,
 	if (!tp)
 		return 0;
 	if (tp->char_count > 0) {
-		tty3270_do_write(tp, tp->char_buf, tp->char_count);
+		tty3270_do_write(tp, tty, tp->char_buf, tp->char_count);
 		tp->char_count = 0;
 	}
-	tty3270_do_write(tp, buf, count);
+	tty3270_do_write(tp, tty, buf, count);
 	return count;
 }
 
@@ -1629,7 +1620,7 @@ tty3270_flush_chars(struct tty_struct *tty)
 	if (!tp)
 		return;
 	if (tp->char_count > 0) {
-		tty3270_do_write(tp, tp->char_buf, tp->char_count);
+		tty3270_do_write(tp, tty, tp->char_buf, tp->char_count);
 		tp->char_count = 0;
 	}
 }
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index 390168f62a13..5fdca93892ad 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -1228,8 +1228,7 @@ static int asd_seq_start_lseq(struct asd_ha_struct *asd_ha, int lseq)
 
 int asd_release_firmware(void)
 {
-	if (sequencer_fw)
-		release_firmware(sequencer_fw);
+	release_firmware(sequencer_fw);
 	return 0;
 }
 
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 394ed9e79fd4..34552bf1c023 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1000,7 +1000,7 @@ static int esp_check_spur_intr(struct esp *esp)
 
 static void esp_schedule_reset(struct esp *esp)
 {
-	esp_log_reset("ESP: esp_schedule_reset() from %p\n",
+	esp_log_reset("ESP: esp_schedule_reset() from %pf\n",
 		      __builtin_return_address(0));
 	esp->flags |= ESP_FLAG_RESETTING;
 	esp_event(esp, ESP_EVENT_RESET);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 6c6486f626ee..538230be5cca 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -4473,17 +4473,14 @@ qla1280_exit(void)
 	pci_unregister_driver(&qla1280_pci_driver);
 	/* release any allocated firmware images */
 	for (i = 0; i < QL_NUM_FW_IMAGES; i++) {
-		if (qla1280_fw_tbl[i].fw) {
-			release_firmware(qla1280_fw_tbl[i].fw);
-			qla1280_fw_tbl[i].fw = NULL;
-		}
+		release_firmware(qla1280_fw_tbl[i].fw);
+		qla1280_fw_tbl[i].fw = NULL;
 	}
 }
 
 module_init(qla1280_init);
 module_exit(qla1280_exit);
 
-
 MODULE_AUTHOR("Qlogic & Jes Sorensen");
 MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7db803377c64..c9c56a8427f3 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -4122,8 +4122,7 @@ qla2x00_release_firmware(void)
 
 	mutex_lock(&qla_fw_lock);
 	for (idx = 0; idx < FW_BLOBS; idx++)
-		if (qla_fw_blobs[idx].fw)
-			release_firmware(qla_fw_blobs[idx].fw);
+		release_firmware(qla_fw_blobs[idx].fw);
 	mutex_unlock(&qla_fw_lock);
 }
 
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 386f0c53bea7..d0f71e5d065f 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -664,7 +664,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
 }
 
 /**
- * scsi_eh_prep_cmnd  - Save a scsi command info as part of error recory
+ * scsi_eh_prep_cmnd  - Save a scsi command info as part of error recovery
  * @scmd:       SCSI command structure to hijack
  * @ses:        structure to save restore information
  * @cmnd:       CDB to send. Can be NULL if no new cmnd is needed
@@ -739,7 +739,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
 EXPORT_SYMBOL(scsi_eh_prep_cmnd);
 
 /**
- * scsi_eh_restore_cmnd  - Restore a scsi command info as part of error recory
+ * scsi_eh_restore_cmnd  - Restore a scsi command info as part of error recovery
  * @scmd:       SCSI command structure to restore
  * @ses:        saved information from a coresponding call to scsi_eh_prep_cmnd
  *
@@ -762,7 +762,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
 EXPORT_SYMBOL(scsi_eh_restore_cmnd);
 
 /**
- * scsi_send_eh_cmnd  - submit a scsi command as part of error recory
+ * scsi_send_eh_cmnd  - submit a scsi command as part of error recovery
  * @scmd:       SCSI command structure to hijack
  * @cmnd:       CDB to send
  * @cmnd_size:  size in bytes of @cmnd
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 91b6d52f74eb..f0d015dd0fef 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -2,6 +2,7 @@
  * Helper routines for SuperH Clock Pulse Generator blocks (CPG).
  *
  *  Copyright (C) 2010  Magnus Damm
+ *  Copyright (C) 2010 - 2012  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -13,26 +14,44 @@
 #include <linux/io.h>
 #include <linux/sh_clk.h>
 
-static int sh_clk_mstp32_enable(struct clk *clk)
+static unsigned int sh_clk_read(struct clk *clk)
 {
-	iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit),
-		  clk->mapped_reg);
+	if (clk->flags & CLK_ENABLE_REG_8BIT)
+		return ioread8(clk->mapped_reg);
+	else if (clk->flags & CLK_ENABLE_REG_16BIT)
+		return ioread16(clk->mapped_reg);
+
+	return ioread32(clk->mapped_reg);
+}
+
+static void sh_clk_write(int value, struct clk *clk)
+{
+	if (clk->flags & CLK_ENABLE_REG_8BIT)
+		iowrite8(value, clk->mapped_reg);
+	else if (clk->flags & CLK_ENABLE_REG_16BIT)
+		iowrite16(value, clk->mapped_reg);
+	else
+		iowrite32(value, clk->mapped_reg);
+}
+
+static int sh_clk_mstp_enable(struct clk *clk)
+{
+	sh_clk_write(sh_clk_read(clk) & ~(1 << clk->enable_bit), clk);
 	return 0;
 }
 
-static void sh_clk_mstp32_disable(struct clk *clk)
+static void sh_clk_mstp_disable(struct clk *clk)
 {
-	iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit),
-		  clk->mapped_reg);
+	sh_clk_write(sh_clk_read(clk) | (1 << clk->enable_bit), clk);
 }
 
-static struct sh_clk_ops sh_clk_mstp32_clk_ops = {
-	.enable		= sh_clk_mstp32_enable,
-	.disable	= sh_clk_mstp32_disable,
+static struct sh_clk_ops sh_clk_mstp_clk_ops = {
+	.enable		= sh_clk_mstp_enable,
+	.disable	= sh_clk_mstp_disable,
 	.recalc		= followparent_recalc,
 };
 
-int __init sh_clk_mstp32_register(struct clk *clks, int nr)
+int __init sh_clk_mstp_register(struct clk *clks, int nr)
 {
 	struct clk *clkp;
 	int ret = 0;
@@ -40,7 +59,7 @@ int __init sh_clk_mstp32_register(struct clk *clks, int nr)
 
 	for (k = 0; !ret && (k < nr); k++) {
 		clkp = clks + k;
-		clkp->ops = &sh_clk_mstp32_clk_ops;
+		clkp->ops = &sh_clk_mstp_clk_ops;
 		ret |= clk_register(clkp);
 	}
 
@@ -72,7 +91,7 @@ static unsigned long sh_clk_div6_recalc(struct clk *clk)
 	clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
 			     table, NULL);
 
-	idx = ioread32(clk->mapped_reg) & 0x003f;
+	idx = sh_clk_read(clk) & 0x003f;
 
 	return clk->freq_table[idx].frequency;
 }
@@ -98,10 +117,10 @@ static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
 	if (ret < 0)
 		return ret;
 
-	value = ioread32(clk->mapped_reg) &
+	value = sh_clk_read(clk) &
 		~(((1 << clk->src_width) - 1) << clk->src_shift);
 
-	iowrite32(value | (i << clk->src_shift), clk->mapped_reg);
+	sh_clk_write(value | (i << clk->src_shift), clk);
 
 	/* Rebuild the frequency table */
 	clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
@@ -119,10 +138,10 @@ static int sh_clk_div6_set_rate(struct clk *clk, unsigned long rate)
 	if (idx < 0)
 		return idx;
 
-	value = ioread32(clk->mapped_reg);
+	value = sh_clk_read(clk);
 	value &= ~0x3f;
 	value |= idx;
-	iowrite32(value, clk->mapped_reg);
+	sh_clk_write(value, clk);
 	return 0;
 }
 
@@ -133,9 +152,9 @@ static int sh_clk_div6_enable(struct clk *clk)
 
 	ret = sh_clk_div6_set_rate(clk, clk->rate);
 	if (ret == 0) {
-		value = ioread32(clk->mapped_reg);
+		value = sh_clk_read(clk);
 		value &= ~0x100; /* clear stop bit to enable clock */
-		iowrite32(value, clk->mapped_reg);
+		sh_clk_write(value, clk);
 	}
 	return ret;
 }
@@ -144,10 +163,10 @@ static void sh_clk_div6_disable(struct clk *clk)
 {
 	unsigned long value;
 
-	value = ioread32(clk->mapped_reg);
+	value = sh_clk_read(clk);
 	value |= 0x100; /* stop clock */
 	value |= 0x3f; /* VDIV bits must be non-zero, overwrite divider */
-	iowrite32(value, clk->mapped_reg);
+	sh_clk_write(value, clk);
 }
 
 static struct sh_clk_ops sh_clk_div6_clk_ops = {
@@ -182,7 +201,7 @@ static int __init sh_clk_init_parent(struct clk *clk)
 		return -EINVAL;
 	}
 
-	val  = (ioread32(clk->mapped_reg) >> clk->src_shift);
+	val  = (sh_clk_read(clk) >> clk->src_shift);
 	val &= (1 << clk->src_width) - 1;
 
 	if (val >= clk->parent_num) {
@@ -252,7 +271,7 @@ static unsigned long sh_clk_div4_recalc(struct clk *clk)
 	clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
 			     table, &clk->arch_flags);
 
-	idx = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0x000f;
+	idx = (sh_clk_read(clk) >> clk->enable_bit) & 0x000f;
 
 	return clk->freq_table[idx].frequency;
 }
@@ -270,15 +289,15 @@ static int sh_clk_div4_set_parent(struct clk *clk, struct clk *parent)
 	 */
 
 	if (parent->flags & CLK_ENABLE_ON_INIT)
-		value = ioread32(clk->mapped_reg) & ~(1 << 7);
+		value = sh_clk_read(clk) & ~(1 << 7);
 	else
-		value = ioread32(clk->mapped_reg) | (1 << 7);
+		value = sh_clk_read(clk) | (1 << 7);
 
 	ret = clk_reparent(clk, parent);
 	if (ret < 0)
 		return ret;
 
-	iowrite32(value, clk->mapped_reg);
+	sh_clk_write(value, clk);
 
 	/* Rebiuld the frequency table */
 	clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
@@ -295,10 +314,10 @@ static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate)
 	if (idx < 0)
 		return idx;
 
-	value = ioread32(clk->mapped_reg);
+	value = sh_clk_read(clk);
 	value &= ~(0xf << clk->enable_bit);
 	value |= (idx << clk->enable_bit);
-	iowrite32(value, clk->mapped_reg);
+	sh_clk_write(value, clk);
 
 	if (d4t->kick)
 		d4t->kick(clk);
@@ -308,13 +327,13 @@ static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate)
 
 static int sh_clk_div4_enable(struct clk *clk)
 {
-	iowrite32(ioread32(clk->mapped_reg) & ~(1 << 8), clk->mapped_reg);
+	sh_clk_write(sh_clk_read(clk) & ~(1 << 8), clk);
 	return 0;
 }
 
 static void sh_clk_div4_disable(struct clk *clk)
 {
-	iowrite32(ioread32(clk->mapped_reg) | (1 << 8), clk->mapped_reg);
+	sh_clk_write(sh_clk_read(clk) | (1 << 8), clk);
 }
 
 static struct sh_clk_ops sh_clk_div4_clk_ops = {
diff --git a/drivers/sh/intc/dynamic.c b/drivers/sh/intc/dynamic.c
index 5fea1ee8799a..14eb01ef5d72 100644
--- a/drivers/sh/intc/dynamic.c
+++ b/drivers/sh/intc/dynamic.c
@@ -55,11 +55,3 @@ void destroy_irq(unsigned int irq)
 {
 	irq_free_desc(irq);
 }
-
-void reserve_intc_vectors(struct intc_vect *vectors, unsigned int nr_vecs)
-{
-	int i;
-
-	for (i = 0; i < nr_vecs; i++)
-		irq_reserve_irq(evt2irq(vectors[i].vect));
-}
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 97d412d91458..05e33c700750 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -24,8 +24,6 @@ menuconfig STAGING
 
 if STAGING
 
-source "drivers/staging/serial/Kconfig"
-
 source "drivers/staging/et131x/Kconfig"
 
 source "drivers/staging/slicoss/Kconfig"
@@ -68,14 +66,10 @@ source "drivers/staging/octeon/Kconfig"
 
 source "drivers/staging/serqt_usb2/Kconfig"
 
-source "drivers/staging/quatech_usb2/Kconfig"
-
 source "drivers/staging/vt6655/Kconfig"
 
 source "drivers/staging/vt6656/Kconfig"
 
-source "drivers/staging/vme/Kconfig"
-
 source "drivers/staging/sep/Kconfig"
 
 source "drivers/staging/iio/Kconfig"
@@ -116,12 +110,12 @@ source "drivers/staging/cptm1217/Kconfig"
 
 source "drivers/staging/ste_rmi4/Kconfig"
 
-source "drivers/staging/mei/Kconfig"
-
 source "drivers/staging/nvec/Kconfig"
 
 source "drivers/staging/media/Kconfig"
 
+source "drivers/staging/net/Kconfig"
+
 source "drivers/staging/omapdrm/Kconfig"
 
 source "drivers/staging/android/Kconfig"
@@ -132,4 +126,10 @@ source "drivers/staging/ramster/Kconfig"
 
 source "drivers/staging/ozwpan/Kconfig"
 
+source "drivers/staging/ccg/Kconfig"
+
+source "drivers/staging/ipack/Kconfig"
+
+source "drivers/staging/gdm72xx/Kconfig"
+
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index ffe7d44374e6..a987b3ad380b 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -3,8 +3,8 @@
 # fix for build system bug...
 obj-$(CONFIG_STAGING)		+= staging.o
 
-obj-y				+= serial/
 obj-y				+= media/
+obj-y				+= net/
 obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_USBIP_CORE)	+= usbip/
@@ -25,11 +25,11 @@ obj-$(CONFIG_TRANZPORT)		+= frontier/
 obj-$(CONFIG_IDE_PHISON)	+= phison/
 obj-$(CONFIG_LINE6_USB)		+= line6/
 obj-$(CONFIG_USB_SERIAL_QUATECH2)	+= serqt_usb2/
-obj-$(CONFIG_USB_SERIAL_QUATECH_USB2)	+= quatech_usb2/
 obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
 obj-$(CONFIG_VT6655)		+= vt6655/
 obj-$(CONFIG_VT6656)		+= vt6656/
 obj-$(CONFIG_VME_BUS)		+= vme/
+obj-$(CONFIG_IPACK_BUS)		+= ipack/
 obj-$(CONFIG_DX_SEP)            += sep/
 obj-$(CONFIG_IIO)		+= iio/
 obj-$(CONFIG_ZRAM)		+= zram/
@@ -50,10 +50,11 @@ obj-$(CONFIG_FT1000)		+= ft1000/
 obj-$(CONFIG_SPEAKUP)		+= speakup/
 obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217)	+= cptm1217/
 obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)	+= ste_rmi4/
-obj-$(CONFIG_INTEL_MEI)		+= mei/
 obj-$(CONFIG_MFD_NVEC)		+= nvec/
 obj-$(CONFIG_DRM_OMAP)		+= omapdrm/
 obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_RAMSTER)		+= ramster/
 obj-$(CONFIG_USB_WPAN_HCD)	+= ozwpan/
+obj-$(CONFIG_USB_G_CCG)		+= ccg/
+obj-$(CONFIG_WIMAX_GDM72XX)	+= gdm72xx/
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index eb1dee26bda3..0e16b594460f 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -25,17 +25,9 @@ config ANDROID_LOGGER
 	tristate "Android log driver"
 	default n
 
-config ANDROID_PERSISTENT_RAM
-	bool
-	depends on HAVE_MEMBLOCK
-	select REED_SOLOMON
-	select REED_SOLOMON_ENC8
-	select REED_SOLOMON_DEC8
-
 config ANDROID_RAM_CONSOLE
 	bool "Android RAM buffer console"
-	depends on !S390 && !UML && HAVE_MEMBLOCK
-	select ANDROID_PERSISTENT_RAM
+	depends on !S390 && !UML && HAVE_MEMBLOCK && PSTORE_RAM=y
 	default n
 
 config ANDROID_TIMED_OUTPUT
@@ -53,33 +45,14 @@ config ANDROID_LOW_MEMORY_KILLER
 	---help---
 	  Register processes to be killed when memory is low
 
-source "drivers/staging/android/switch/Kconfig"
-
-config ANDROID_INTF_ALARM
+config ANDROID_INTF_ALARM_DEV
 	bool "Android alarm driver"
 	depends on RTC_CLASS
 	default n
 	help
 	  Provides non-wakeup and rtc backed wakeup alarms based on rtc or
 	  elapsed realtime, and a non-wakeup alarm on the monotonic clock.
-	  Also provides an interface to set the wall time which must be used
-	  for elapsed realtime to work.
-
-config ANDROID_INTF_ALARM_DEV
-	bool "Android alarm device"
-	depends on ANDROID_INTF_ALARM
-	default y
-	help
-	  Exports the alarm interface to user-space.
-
-config ANDROID_ALARM_OLDDRV_COMPAT
-	bool "Android Alarm compatability with old drivers"
-	depends on ANDROID_INTF_ALARM
-	default n
-	help
-	  Provides preprocessor alias to aid compatability with
-	  older out-of-tree drivers that use the Android Alarm
-	  in-kernel API. This will be removed eventually.
+	  Also exports the alarm interface to user-space.
 
 endif # if ANDROID
 
diff --git a/drivers/staging/android/Makefile b/drivers/staging/android/Makefile
index 9b6c9ed91f69..98711e2b2afa 100644
--- a/drivers/staging/android/Makefile
+++ b/drivers/staging/android/Makefile
@@ -1,11 +1,8 @@
 obj-$(CONFIG_ANDROID_BINDER_IPC)	+= binder.o
 obj-$(CONFIG_ASHMEM)			+= ashmem.o
 obj-$(CONFIG_ANDROID_LOGGER)		+= logger.o
-obj-$(CONFIG_ANDROID_PERSISTENT_RAM)	+= persistent_ram.o
 obj-$(CONFIG_ANDROID_RAM_CONSOLE)	+= ram_console.o
 obj-$(CONFIG_ANDROID_TIMED_OUTPUT)	+= timed_output.o
 obj-$(CONFIG_ANDROID_TIMED_GPIO)	+= timed_gpio.o
 obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER)	+= lowmemorykiller.o
-obj-$(CONFIG_ANDROID_SWITCH)		+= switch/
-obj-$(CONFIG_ANDROID_INTF_ALARM)	+= alarm.o
 obj-$(CONFIG_ANDROID_INTF_ALARM_DEV)	+= alarm-dev.o
diff --git a/drivers/staging/android/alarm-dev.c b/drivers/staging/android/alarm-dev.c
index 03efb34cbe2e..53ce6ecf390a 100644
--- a/drivers/staging/android/alarm-dev.c
+++ b/drivers/staging/android/alarm-dev.c
@@ -22,19 +22,9 @@
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
+#include <linux/alarmtimer.h>
 #include "android_alarm.h"
 
-/* XXX - Hack out wakelocks, while they are out of tree */
-struct wake_lock {
-	int i;
-};
-#define wake_lock(x)
-#define wake_lock_timeout(x, y)
-#define wake_unlock(x)
-#define WAKE_LOCK_SUSPEND 0
-#define wake_lock_init(x, y, z) ((x)->i = 1)
-#define wake_lock_destroy(x)
-
 #define ANDROID_ALARM_PRINT_INFO (1U << 0)
 #define ANDROID_ALARM_PRINT_IO (1U << 1)
 #define ANDROID_ALARM_PRINT_INT (1U << 2)
@@ -54,19 +44,65 @@ module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP);
 	ANDROID_ALARM_RTC_WAKEUP_MASK | \
 	ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK)
 
-/* support old usespace code */
+/* support old userspace code */
 #define ANDROID_ALARM_SET_OLD               _IOW('a', 2, time_t) /* set alarm */
 #define ANDROID_ALARM_SET_AND_WAIT_OLD      _IOW('a', 3, time_t)
 
 static int alarm_opened;
 static DEFINE_SPINLOCK(alarm_slock);
-static struct wake_lock alarm_wake_lock;
+static struct wakeup_source alarm_wake_lock;
 static DECLARE_WAIT_QUEUE_HEAD(alarm_wait_queue);
 static uint32_t alarm_pending;
 static uint32_t alarm_enabled;
 static uint32_t wait_pending;
 
-static struct android_alarm alarms[ANDROID_ALARM_TYPE_COUNT];
+struct devalarm {
+	union {
+		struct hrtimer hrt;
+		struct alarm alrm;
+	} u;
+	enum android_alarm_type type;
+};
+
+static struct devalarm alarms[ANDROID_ALARM_TYPE_COUNT];
+
+
+static int is_wakeup(enum android_alarm_type type)
+{
+	if (type == ANDROID_ALARM_RTC_WAKEUP ||
+			type == ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP)
+		return 1;
+	return 0;
+}
+
+
+static void devalarm_start(struct devalarm *alrm, ktime_t exp)
+{
+	if (is_wakeup(alrm->type))
+		alarm_start(&alrm->u.alrm, exp);
+	else
+		hrtimer_start(&alrm->u.hrt, exp, HRTIMER_MODE_ABS);
+}
+
+
+static int devalarm_try_to_cancel(struct devalarm *alrm)
+{
+	int ret;
+	if (is_wakeup(alrm->type))
+		ret = alarm_try_to_cancel(&alrm->u.alrm);
+	else
+		ret = hrtimer_try_to_cancel(&alrm->u.hrt);
+	return ret;
+}
+
+static void devalarm_cancel(struct devalarm *alrm)
+{
+	if (is_wakeup(alrm->type))
+		alarm_cancel(&alrm->u.alrm);
+	else
+		hrtimer_cancel(&alrm->u.hrt);
+}
+
 
 static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
@@ -75,6 +111,8 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	struct timespec new_alarm_time;
 	struct timespec new_rtc_time;
 	struct timespec tmp_time;
+	struct rtc_time new_rtc_tm;
+	struct rtc_device *rtc_dev;
 	enum android_alarm_type alarm_type = ANDROID_ALARM_IOCTL_TO_TYPE(cmd);
 	uint32_t alarm_type_mask = 1U << alarm_type;
 
@@ -101,11 +139,11 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case ANDROID_ALARM_CLEAR(0):
 		spin_lock_irqsave(&alarm_slock, flags);
 		pr_alarm(IO, "alarm %d clear\n", alarm_type);
-		android_alarm_try_to_cancel(&alarms[alarm_type]);
+		devalarm_try_to_cancel(&alarms[alarm_type]);
 		if (alarm_pending) {
 			alarm_pending &= ~alarm_type_mask;
 			if (!alarm_pending && !wait_pending)
-				wake_unlock(&alarm_wake_lock);
+				__pm_relax(&alarm_wake_lock);
 		}
 		alarm_enabled &= ~alarm_type_mask;
 		spin_unlock_irqrestore(&alarm_slock, flags);
@@ -132,8 +170,7 @@ from_old_alarm_set:
 		pr_alarm(IO, "alarm %d set %ld.%09ld\n", alarm_type,
 			new_alarm_time.tv_sec, new_alarm_time.tv_nsec);
 		alarm_enabled |= alarm_type_mask;
-		android_alarm_start_range(&alarms[alarm_type],
-			timespec_to_ktime(new_alarm_time),
+		devalarm_start(&alarms[alarm_type],
 			timespec_to_ktime(new_alarm_time));
 		spin_unlock_irqrestore(&alarm_slock, flags);
 		if (ANDROID_ALARM_BASE_CMD(cmd) != ANDROID_ALARM_SET_AND_WAIT(0)
@@ -144,7 +181,7 @@ from_old_alarm_set:
 		spin_lock_irqsave(&alarm_slock, flags);
 		pr_alarm(IO, "alarm wait\n");
 		if (!alarm_pending && wait_pending) {
-			wake_unlock(&alarm_wake_lock);
+			__pm_relax(&alarm_wake_lock);
 			wait_pending = 0;
 		}
 		spin_unlock_irqrestore(&alarm_slock, flags);
@@ -163,7 +200,13 @@ from_old_alarm_set:
 			rv = -EFAULT;
 			goto err1;
 		}
-		rv = android_alarm_set_rtc(new_rtc_time);
+		rtc_time_to_tm(new_rtc_time.tv_sec, &new_rtc_tm);
+		rtc_dev = alarmtimer_get_rtcdev();
+		rv = do_settimeofday(&new_rtc_time);
+		if (rv < 0)
+			goto err1;
+		if (rtc_dev)
+			rv = rtc_set_time(rtc_dev, &new_rtc_tm);
 		spin_lock_irqsave(&alarm_slock, flags);
 		alarm_pending |= ANDROID_ALARM_TIME_CHANGE_MASK;
 		wake_up(&alarm_wait_queue);
@@ -179,8 +222,7 @@ from_old_alarm_set:
 			break;
 		case ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP:
 		case ANDROID_ALARM_ELAPSED_REALTIME:
-			tmp_time =
-				ktime_to_timespec(alarm_get_elapsed_realtime());
+			get_monotonic_boottime(&tmp_time);
 			break;
 		case ANDROID_ALARM_TYPE_COUNT:
 		case ANDROID_ALARM_SYSTEMTIME:
@@ -224,14 +266,14 @@ static int alarm_release(struct inode *inode, struct file *file)
 				alarm_enabled &= ~alarm_type_mask;
 			}
 			spin_unlock_irqrestore(&alarm_slock, flags);
-			android_alarm_cancel(&alarms[i]);
+			devalarm_cancel(&alarms[i]);
 			spin_lock_irqsave(&alarm_slock, flags);
 		}
 		if (alarm_pending | wait_pending) {
 			if (alarm_pending)
 				pr_alarm(INFO, "alarm_release: clear "
 					"pending alarms %x\n", alarm_pending);
-			wake_unlock(&alarm_wake_lock);
+			__pm_relax(&alarm_wake_lock);
 			wait_pending = 0;
 			alarm_pending = 0;
 		}
@@ -241,15 +283,15 @@ static int alarm_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static void alarm_triggered(struct android_alarm *alarm)
+static void devalarm_triggered(struct devalarm *alarm)
 {
 	unsigned long flags;
 	uint32_t alarm_type_mask = 1U << alarm->type;
 
-	pr_alarm(INT, "alarm_triggered type %d\n", alarm->type);
+	pr_alarm(INT, "devalarm_triggered type %d\n", alarm->type);
 	spin_lock_irqsave(&alarm_slock, flags);
 	if (alarm_enabled & alarm_type_mask) {
-		wake_lock_timeout(&alarm_wake_lock, 5 * HZ);
+		__pm_wakeup_event(&alarm_wake_lock, 5000); /* 5secs */
 		alarm_enabled &= ~alarm_type_mask;
 		alarm_pending |= alarm_type_mask;
 		wake_up(&alarm_wait_queue);
@@ -257,6 +299,25 @@ static void alarm_triggered(struct android_alarm *alarm)
 	spin_unlock_irqrestore(&alarm_slock, flags);
 }
 
+
+static enum hrtimer_restart devalarm_hrthandler(struct hrtimer *hrt)
+{
+	struct devalarm *devalrm = container_of(hrt, struct devalarm, u.hrt);
+
+	devalarm_triggered(devalrm);
+	return HRTIMER_NORESTART;
+}
+
+static enum alarmtimer_restart devalarm_alarmhandler(struct alarm *alrm,
+							ktime_t now)
+{
+	struct devalarm *devalrm = container_of(alrm, struct devalarm, u.alrm);
+
+	devalarm_triggered(devalrm);
+	return ALARMTIMER_NORESTART;
+}
+
+
 static const struct file_operations alarm_fops = {
 	.owner = THIS_MODULE,
 	.unlocked_ioctl = alarm_ioctl,
@@ -279,17 +340,31 @@ static int __init alarm_dev_init(void)
 	if (err)
 		return err;
 
-	for (i = 0; i < ANDROID_ALARM_TYPE_COUNT; i++)
-		android_alarm_init(&alarms[i], i, alarm_triggered);
-	wake_lock_init(&alarm_wake_lock, WAKE_LOCK_SUSPEND, "alarm");
+	alarm_init(&alarms[ANDROID_ALARM_RTC_WAKEUP].u.alrm,
+			ALARM_REALTIME, devalarm_alarmhandler);
+	hrtimer_init(&alarms[ANDROID_ALARM_RTC].u.hrt,
+			CLOCK_REALTIME, HRTIMER_MODE_ABS);
+	alarm_init(&alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].u.alrm,
+			ALARM_BOOTTIME, devalarm_alarmhandler);
+	hrtimer_init(&alarms[ANDROID_ALARM_ELAPSED_REALTIME].u.hrt,
+			CLOCK_BOOTTIME, HRTIMER_MODE_ABS);
+	hrtimer_init(&alarms[ANDROID_ALARM_SYSTEMTIME].u.hrt,
+			CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+
+	for (i = 0; i < ANDROID_ALARM_TYPE_COUNT; i++) {
+		alarms[i].type = i;
+		if (!is_wakeup(i))
+			alarms[i].u.hrt.function = devalarm_hrthandler;
+	}
 
+	wakeup_source_init(&alarm_wake_lock, "alarm");
 	return 0;
 }
 
 static void  __exit alarm_dev_exit(void)
 {
 	misc_deregister(&alarm_device);
-	wake_lock_destroy(&alarm_wake_lock);
+	wakeup_source_trash(&alarm_wake_lock);
 }
 
 module_init(alarm_dev_init);
diff --git a/drivers/staging/android/alarm.c b/drivers/staging/android/alarm.c
deleted file mode 100644
index c68950b9e08f..000000000000
--- a/drivers/staging/android/alarm.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/* drivers/rtc/alarm.c
- *
- * Copyright (C) 2007-2009 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/time.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/miscdevice.h>
-#include <linux/platform_device.h>
-#include <linux/rtc.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include "android_alarm.h"
-
-/* XXX - Hack out wakelocks, while they are out of tree */
-struct wake_lock {
-	int i;
-};
-#define wake_lock(x)
-#define wake_lock_timeout(x, y)
-#define wake_unlock(x)
-#define WAKE_LOCK_SUSPEND 0
-#define wake_lock_init(x, y, z) ((x)->i = 1)
-#define wake_lock_destroy(x)
-
-#define ANDROID_ALARM_PRINT_ERROR (1U << 0)
-#define ANDROID_ALARM_PRINT_INIT_STATUS (1U << 1)
-#define ANDROID_ALARM_PRINT_TSET (1U << 2)
-#define ANDROID_ALARM_PRINT_CALL (1U << 3)
-#define ANDROID_ALARM_PRINT_SUSPEND (1U << 4)
-#define ANDROID_ALARM_PRINT_INT (1U << 5)
-#define ANDROID_ALARM_PRINT_FLOW (1U << 6)
-
-static int debug_mask = ANDROID_ALARM_PRINT_ERROR | \
-			ANDROID_ALARM_PRINT_INIT_STATUS;
-module_param_named(debug_mask, debug_mask, int, S_IRUGO | S_IWUSR | S_IWGRP);
-
-#define pr_alarm(debug_level_mask, args...) \
-	do { \
-		if (debug_mask & ANDROID_ALARM_PRINT_##debug_level_mask) { \
-			pr_info(args); \
-		} \
-	} while (0)
-
-#define ANDROID_ALARM_WAKEUP_MASK ( \
-	ANDROID_ALARM_RTC_WAKEUP_MASK | \
-	ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP_MASK)
-
-/* support old usespace code */
-#define ANDROID_ALARM_SET_OLD               _IOW('a', 2, time_t) /* set alarm */
-#define ANDROID_ALARM_SET_AND_WAIT_OLD      _IOW('a', 3, time_t)
-
-struct alarm_queue {
-	struct rb_root alarms;
-	struct rb_node *first;
-	struct hrtimer timer;
-	ktime_t delta;
-	bool stopped;
-	ktime_t stopped_time;
-};
-
-static struct rtc_device *alarm_rtc_dev;
-static DEFINE_SPINLOCK(alarm_slock);
-static DEFINE_MUTEX(alarm_setrtc_mutex);
-static struct wake_lock alarm_rtc_wake_lock;
-static struct platform_device *alarm_platform_dev;
-struct alarm_queue alarms[ANDROID_ALARM_TYPE_COUNT];
-static bool suspended;
-
-static void update_timer_locked(struct alarm_queue *base, bool head_removed)
-{
-	struct android_alarm *alarm;
-	bool is_wakeup = base == &alarms[ANDROID_ALARM_RTC_WAKEUP] ||
-			base == &alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP];
-
-	if (base->stopped) {
-		pr_alarm(FLOW, "changed alarm while setting the wall time\n");
-		return;
-	}
-
-	if (is_wakeup && !suspended && head_removed)
-		wake_unlock(&alarm_rtc_wake_lock);
-
-	if (!base->first)
-		return;
-
-	alarm = container_of(base->first, struct android_alarm, node);
-
-	pr_alarm(FLOW, "selected alarm, type %d, func %pF at %lld\n",
-		alarm->type, alarm->function, ktime_to_ns(alarm->expires));
-
-	if (is_wakeup && suspended) {
-		pr_alarm(FLOW, "changed alarm while suspened\n");
-		wake_lock_timeout(&alarm_rtc_wake_lock, 1 * HZ);
-		return;
-	}
-
-	hrtimer_try_to_cancel(&base->timer);
-	base->timer.node.expires = ktime_add(base->delta, alarm->expires);
-	base->timer._softexpires = ktime_add(base->delta, alarm->softexpires);
-	hrtimer_start_expires(&base->timer, HRTIMER_MODE_ABS);
-}
-
-static void alarm_enqueue_locked(struct android_alarm *alarm)
-{
-	struct alarm_queue *base = &alarms[alarm->type];
-	struct rb_node **link = &base->alarms.rb_node;
-	struct rb_node *parent = NULL;
-	struct android_alarm *entry;
-	int leftmost = 1;
-	bool was_first = false;
-
-	pr_alarm(FLOW, "added alarm, type %d, func %pF at %lld\n",
-		alarm->type, alarm->function, ktime_to_ns(alarm->expires));
-
-	if (base->first == &alarm->node) {
-		base->first = rb_next(&alarm->node);
-		was_first = true;
-	}
-	if (!RB_EMPTY_NODE(&alarm->node)) {
-		rb_erase(&alarm->node, &base->alarms);
-		RB_CLEAR_NODE(&alarm->node);
-	}
-
-	while (*link) {
-		parent = *link;
-		entry = rb_entry(parent, struct android_alarm, node);
-		/*
-		* We dont care about collisions. Nodes with
-		* the same expiry time stay together.
-		*/
-		if (alarm->expires.tv64 < entry->expires.tv64) {
-			link = &(*link)->rb_left;
-		} else {
-			link = &(*link)->rb_right;
-			leftmost = 0;
-		}
-	}
-	if (leftmost)
-		base->first = &alarm->node;
-	if (leftmost || was_first)
-		update_timer_locked(base, was_first);
-
-	rb_link_node(&alarm->node, parent, link);
-	rb_insert_color(&alarm->node, &base->alarms);
-}
-
-/**
- * android_alarm_init - initialize an alarm
- * @alarm:	the alarm to be initialized
- * @type:	the alarm type to be used
- * @function:	alarm callback function
- */
-void android_alarm_init(struct android_alarm *alarm,
-	enum android_alarm_type type, void (*function)(struct android_alarm *))
-{
-	RB_CLEAR_NODE(&alarm->node);
-	alarm->type = type;
-	alarm->function = function;
-
-	pr_alarm(FLOW, "created alarm, type %d, func %pF\n", type, function);
-}
-
-
-/**
- * android_alarm_start_range - (re)start an alarm
- * @alarm:	the alarm to be added
- * @start:	earliest expiry time
- * @end:	expiry time
- */
-void android_alarm_start_range(struct android_alarm *alarm, ktime_t start,
-								ktime_t end)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	alarm->softexpires = start;
-	alarm->expires = end;
-	alarm_enqueue_locked(alarm);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-}
-
-/**
- * android_alarm_try_to_cancel - try to deactivate an alarm
- * @alarm:	alarm to stop
- *
- * Returns:
- *  0 when the alarm was not active
- *  1 when the alarm was active
- * -1 when the alarm may currently be excuting the callback function and
- *    cannot be stopped (it may also be inactive)
- */
-int android_alarm_try_to_cancel(struct android_alarm *alarm)
-{
-	struct alarm_queue *base = &alarms[alarm->type];
-	unsigned long flags;
-	bool first = false;
-	int ret = 0;
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	if (!RB_EMPTY_NODE(&alarm->node)) {
-		pr_alarm(FLOW, "canceled alarm, type %d, func %pF at %lld\n",
-			alarm->type, alarm->function,
-			ktime_to_ns(alarm->expires));
-		ret = 1;
-		if (base->first == &alarm->node) {
-			base->first = rb_next(&alarm->node);
-			first = true;
-		}
-		rb_erase(&alarm->node, &base->alarms);
-		RB_CLEAR_NODE(&alarm->node);
-		if (first)
-			update_timer_locked(base, true);
-	} else
-		pr_alarm(FLOW, "tried to cancel alarm, type %d, func %pF\n",
-			alarm->type, alarm->function);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	if (!ret && hrtimer_callback_running(&base->timer))
-		ret = -1;
-	return ret;
-}
-
-/**
- * android_alarm_cancel - cancel an alarm and wait for the handler to finish.
- * @alarm:	the alarm to be cancelled
- *
- * Returns:
- *  0 when the alarm was not active
- *  1 when the alarm was active
- */
-int android_alarm_cancel(struct android_alarm *alarm)
-{
-	for (;;) {
-		int ret = android_alarm_try_to_cancel(alarm);
-		if (ret >= 0)
-			return ret;
-		cpu_relax();
-	}
-}
-
-/**
- * alarm_set_rtc - set the kernel and rtc walltime
- * @new_time:	timespec value containing the new time
- */
-int android_alarm_set_rtc(struct timespec new_time)
-{
-	int i;
-	int ret;
-	unsigned long flags;
-	struct rtc_time rtc_new_rtc_time;
-	struct timespec tmp_time;
-
-	rtc_time_to_tm(new_time.tv_sec, &rtc_new_rtc_time);
-
-	pr_alarm(TSET, "set rtc %ld %ld - rtc %02d:%02d:%02d %02d/%02d/%04d\n",
-		new_time.tv_sec, new_time.tv_nsec,
-		rtc_new_rtc_time.tm_hour, rtc_new_rtc_time.tm_min,
-		rtc_new_rtc_time.tm_sec, rtc_new_rtc_time.tm_mon + 1,
-		rtc_new_rtc_time.tm_mday,
-		rtc_new_rtc_time.tm_year + 1900);
-
-	mutex_lock(&alarm_setrtc_mutex);
-	spin_lock_irqsave(&alarm_slock, flags);
-	wake_lock(&alarm_rtc_wake_lock);
-	getnstimeofday(&tmp_time);
-	for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) {
-		hrtimer_try_to_cancel(&alarms[i].timer);
-		alarms[i].stopped = true;
-		alarms[i].stopped_time = timespec_to_ktime(tmp_time);
-	}
-	alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].delta =
-		alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta =
-		ktime_sub(alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta,
-			timespec_to_ktime(timespec_sub(tmp_time, new_time)));
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	ret = do_settimeofday(&new_time);
-	spin_lock_irqsave(&alarm_slock, flags);
-	for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) {
-		alarms[i].stopped = false;
-		update_timer_locked(&alarms[i], false);
-	}
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	if (ret < 0) {
-		pr_alarm(ERROR, "alarm_set_rtc: Failed to set time\n");
-		goto err;
-	}
-	if (!alarm_rtc_dev) {
-		pr_alarm(ERROR,
-			"alarm_set_rtc: no RTC, time will be lost on reboot\n");
-		goto err;
-	}
-	ret = rtc_set_time(alarm_rtc_dev, &rtc_new_rtc_time);
-	if (ret < 0)
-		pr_alarm(ERROR, "alarm_set_rtc: "
-			"Failed to set RTC, time will be lost on reboot\n");
-err:
-	wake_unlock(&alarm_rtc_wake_lock);
-	mutex_unlock(&alarm_setrtc_mutex);
-	return ret;
-}
-
-/**
- * alarm_get_elapsed_realtime - get the elapsed real time in ktime_t format
- *
- * returns the time in ktime_t format
- */
-ktime_t alarm_get_elapsed_realtime(void)
-{
-	ktime_t now;
-	unsigned long flags;
-	struct alarm_queue *base = &alarms[ANDROID_ALARM_ELAPSED_REALTIME];
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	now = base->stopped ? base->stopped_time : ktime_get_real();
-	now = ktime_sub(now, base->delta);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	return now;
-}
-
-static enum hrtimer_restart alarm_timer_triggered(struct hrtimer *timer)
-{
-	struct alarm_queue *base;
-	struct android_alarm *alarm;
-	unsigned long flags;
-	ktime_t now;
-
-	spin_lock_irqsave(&alarm_slock, flags);
-
-	base = container_of(timer, struct alarm_queue, timer);
-	now = base->stopped ? base->stopped_time : hrtimer_cb_get_time(timer);
-	now = ktime_sub(now, base->delta);
-
-	pr_alarm(INT, "alarm_timer_triggered type %ld at %lld\n",
-		base - alarms, ktime_to_ns(now));
-
-	while (base->first) {
-		alarm = container_of(base->first, struct android_alarm, node);
-		if (alarm->softexpires.tv64 > now.tv64) {
-			pr_alarm(FLOW, "don't call alarm, %pF, %lld (s %lld)\n",
-				alarm->function, ktime_to_ns(alarm->expires),
-				ktime_to_ns(alarm->softexpires));
-			break;
-		}
-		base->first = rb_next(&alarm->node);
-		rb_erase(&alarm->node, &base->alarms);
-		RB_CLEAR_NODE(&alarm->node);
-		pr_alarm(CALL, "call alarm, type %d, func %pF, %lld (s %lld)\n",
-			alarm->type, alarm->function,
-			ktime_to_ns(alarm->expires),
-			ktime_to_ns(alarm->softexpires));
-		spin_unlock_irqrestore(&alarm_slock, flags);
-		alarm->function(alarm);
-		spin_lock_irqsave(&alarm_slock, flags);
-	}
-	if (!base->first)
-		pr_alarm(FLOW, "no more alarms of type %ld\n", base - alarms);
-	update_timer_locked(base, true);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	return HRTIMER_NORESTART;
-}
-
-static void alarm_triggered_func(void *p)
-{
-	struct rtc_device *rtc = alarm_rtc_dev;
-	if (!(rtc->irq_data & RTC_AF))
-		return;
-	pr_alarm(INT, "rtc alarm triggered\n");
-	wake_lock_timeout(&alarm_rtc_wake_lock, 1 * HZ);
-}
-
-static int alarm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	int                 err = 0;
-	unsigned long       flags;
-	struct rtc_wkalrm   rtc_alarm;
-	struct rtc_time     rtc_current_rtc_time;
-	unsigned long       rtc_current_time;
-	unsigned long       rtc_alarm_time;
-	struct timespec     rtc_delta;
-	struct timespec     wall_time;
-	struct alarm_queue *wakeup_queue = NULL;
-	struct alarm_queue *tmp_queue = NULL;
-
-	pr_alarm(SUSPEND, "alarm_suspend(%p, %d)\n", pdev, state.event);
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	suspended = true;
-	spin_unlock_irqrestore(&alarm_slock, flags);
-
-	hrtimer_cancel(&alarms[ANDROID_ALARM_RTC_WAKEUP].timer);
-	hrtimer_cancel(&alarms[
-			ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].timer);
-
-	tmp_queue = &alarms[ANDROID_ALARM_RTC_WAKEUP];
-	if (tmp_queue->first)
-		wakeup_queue = tmp_queue;
-	tmp_queue = &alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP];
-	if (tmp_queue->first && (!wakeup_queue ||
-				hrtimer_get_expires(&tmp_queue->timer).tv64 <
-				hrtimer_get_expires(&wakeup_queue->timer).tv64))
-		wakeup_queue = tmp_queue;
-	if (wakeup_queue) {
-		rtc_read_time(alarm_rtc_dev, &rtc_current_rtc_time);
-		getnstimeofday(&wall_time);
-		rtc_tm_to_time(&rtc_current_rtc_time, &rtc_current_time);
-		set_normalized_timespec(&rtc_delta,
-					wall_time.tv_sec - rtc_current_time,
-					wall_time.tv_nsec);
-
-		rtc_alarm_time = timespec_sub(ktime_to_timespec(
-			hrtimer_get_expires(&wakeup_queue->timer)),
-			rtc_delta).tv_sec;
-
-		rtc_time_to_tm(rtc_alarm_time, &rtc_alarm.time);
-		rtc_alarm.enabled = 1;
-		rtc_set_alarm(alarm_rtc_dev, &rtc_alarm);
-		rtc_read_time(alarm_rtc_dev, &rtc_current_rtc_time);
-		rtc_tm_to_time(&rtc_current_rtc_time, &rtc_current_time);
-		pr_alarm(SUSPEND,
-			"rtc alarm set at %ld, now %ld, rtc delta %ld.%09ld\n",
-			rtc_alarm_time, rtc_current_time,
-			rtc_delta.tv_sec, rtc_delta.tv_nsec);
-		if (rtc_current_time + 1 >= rtc_alarm_time) {
-			pr_alarm(SUSPEND, "alarm about to go off\n");
-			memset(&rtc_alarm, 0, sizeof(rtc_alarm));
-			rtc_alarm.enabled = 0;
-			rtc_set_alarm(alarm_rtc_dev, &rtc_alarm);
-
-			spin_lock_irqsave(&alarm_slock, flags);
-			suspended = false;
-			wake_lock_timeout(&alarm_rtc_wake_lock, 2 * HZ);
-			update_timer_locked(&alarms[ANDROID_ALARM_RTC_WAKEUP],
-									false);
-			update_timer_locked(&alarms[
-				ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP], false);
-			err = -EBUSY;
-			spin_unlock_irqrestore(&alarm_slock, flags);
-		}
-	}
-	return err;
-}
-
-static int alarm_resume(struct platform_device *pdev)
-{
-	struct rtc_wkalrm alarm;
-	unsigned long       flags;
-
-	pr_alarm(SUSPEND, "alarm_resume(%p)\n", pdev);
-
-	memset(&alarm, 0, sizeof(alarm));
-	alarm.enabled = 0;
-	rtc_set_alarm(alarm_rtc_dev, &alarm);
-
-	spin_lock_irqsave(&alarm_slock, flags);
-	suspended = false;
-	update_timer_locked(&alarms[ANDROID_ALARM_RTC_WAKEUP], false);
-	update_timer_locked(&alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP],
-									false);
-	spin_unlock_irqrestore(&alarm_slock, flags);
-
-	return 0;
-}
-
-static struct rtc_task alarm_rtc_task = {
-	.func = alarm_triggered_func
-};
-
-static int rtc_alarm_add_device(struct device *dev,
-				struct class_interface *class_intf)
-{
-	int err;
-	struct rtc_device *rtc = to_rtc_device(dev);
-
-	mutex_lock(&alarm_setrtc_mutex);
-
-	if (alarm_rtc_dev) {
-		err = -EBUSY;
-		goto err1;
-	}
-
-	alarm_platform_dev =
-		platform_device_register_simple("alarm", -1, NULL, 0);
-	if (IS_ERR(alarm_platform_dev)) {
-		err = PTR_ERR(alarm_platform_dev);
-		goto err2;
-	}
-	err = rtc_irq_register(rtc, &alarm_rtc_task);
-	if (err)
-		goto err3;
-	alarm_rtc_dev = rtc;
-	pr_alarm(INIT_STATUS, "using rtc device, %s, for alarms", rtc->name);
-	mutex_unlock(&alarm_setrtc_mutex);
-
-	return 0;
-
-err3:
-	platform_device_unregister(alarm_platform_dev);
-err2:
-err1:
-	mutex_unlock(&alarm_setrtc_mutex);
-	return err;
-}
-
-static void rtc_alarm_remove_device(struct device *dev,
-				    struct class_interface *class_intf)
-{
-	if (dev == &alarm_rtc_dev->dev) {
-		pr_alarm(INIT_STATUS, "lost rtc device for alarms");
-		rtc_irq_unregister(alarm_rtc_dev, &alarm_rtc_task);
-		platform_device_unregister(alarm_platform_dev);
-		alarm_rtc_dev = NULL;
-	}
-}
-
-static struct class_interface rtc_alarm_interface = {
-	.add_dev = &rtc_alarm_add_device,
-	.remove_dev = &rtc_alarm_remove_device,
-};
-
-static struct platform_driver alarm_driver = {
-	.suspend = alarm_suspend,
-	.resume = alarm_resume,
-	.driver = {
-		.name = "alarm"
-	}
-};
-
-static int __init alarm_late_init(void)
-{
-	unsigned long   flags;
-	struct timespec tmp_time, system_time;
-
-	/* this needs to run after the rtc is read at boot */
-	spin_lock_irqsave(&alarm_slock, flags);
-	/* We read the current rtc and system time so we can later calulate
-	 * elasped realtime to be (boot_systemtime + rtc - boot_rtc) ==
-	 * (rtc - (boot_rtc - boot_systemtime))
-	 */
-	getnstimeofday(&tmp_time);
-	ktime_get_ts(&system_time);
-	alarms[ANDROID_ALARM_ELAPSED_REALTIME_WAKEUP].delta =
-		alarms[ANDROID_ALARM_ELAPSED_REALTIME].delta =
-			timespec_to_ktime(timespec_sub(tmp_time, system_time));
-
-	spin_unlock_irqrestore(&alarm_slock, flags);
-	return 0;
-}
-
-static int __init alarm_driver_init(void)
-{
-	int err;
-	int i;
-
-	for (i = 0; i < ANDROID_ALARM_SYSTEMTIME; i++) {
-		hrtimer_init(&alarms[i].timer,
-				CLOCK_REALTIME, HRTIMER_MODE_ABS);
-		alarms[i].timer.function = alarm_timer_triggered;
-	}
-	hrtimer_init(&alarms[ANDROID_ALARM_SYSTEMTIME].timer,
-		     CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
-	alarms[ANDROID_ALARM_SYSTEMTIME].timer.function = alarm_timer_triggered;
-	err = platform_driver_register(&alarm_driver);
-	if (err < 0)
-		goto err1;
-	wake_lock_init(&alarm_rtc_wake_lock, WAKE_LOCK_SUSPEND, "alarm_rtc");
-	rtc_alarm_interface.class = rtc_class;
-	err = class_interface_register(&rtc_alarm_interface);
-	if (err < 0)
-		goto err2;
-
-	return 0;
-
-err2:
-	wake_lock_destroy(&alarm_rtc_wake_lock);
-	platform_driver_unregister(&alarm_driver);
-err1:
-	return err;
-}
-
-static void  __exit alarm_exit(void)
-{
-	class_interface_unregister(&rtc_alarm_interface);
-	wake_lock_destroy(&alarm_rtc_wake_lock);
-	platform_driver_unregister(&alarm_driver);
-}
-
-late_initcall(alarm_late_init);
-module_init(alarm_driver_init);
-module_exit(alarm_exit);
-
diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h
index 6eecbde2ef6f..d0cafd637199 100644
--- a/drivers/staging/android/android_alarm.h
+++ b/drivers/staging/android/android_alarm.h
@@ -33,65 +33,6 @@ enum android_alarm_type {
 	/* ANDROID_ALARM_TIME_CHANGE = 16 */
 };
 
-#ifdef __KERNEL__
-
-#include <linux/ktime.h>
-#include <linux/rbtree.h>
-
-/*
- * The alarm interface is similar to the hrtimer interface but adds support
- * for wakeup from suspend. It also adds an elapsed realtime clock that can
- * be used for periodic timers that need to keep runing while the system is
- * suspended and not be disrupted when the wall time is set.
- */
-
-/**
- * struct alarm - the basic alarm structure
- * @node:	red black tree node for time ordered insertion
- * @type:	alarm type. rtc/elapsed-realtime/systemtime, wakeup/non-wakeup.
- * @softexpires: the absolute earliest expiry time of the alarm.
- * @expires:	the absolute expiry time.
- * @function:	alarm expiry callback function
- *
- * The alarm structure must be initialized by alarm_init()
- *
- */
-
-struct android_alarm {
-	struct rb_node		node;
-	enum android_alarm_type type;
-	ktime_t			softexpires;
-	ktime_t			expires;
-	void			(*function)(struct android_alarm *);
-};
-
-void android_alarm_init(struct android_alarm *alarm,
-	enum android_alarm_type type, void (*function)(struct android_alarm *));
-void android_alarm_start_range(struct android_alarm *alarm, ktime_t start,
-								ktime_t end);
-int android_alarm_try_to_cancel(struct android_alarm *alarm);
-int android_alarm_cancel(struct android_alarm *alarm);
-ktime_t alarm_get_elapsed_realtime(void);
-
-/* set rtc while preserving elapsed realtime */
-int android_alarm_set_rtc(const struct timespec ts);
-
-#ifdef CONFIG_ANDROID_ALARM_OLDDRV_COMPAT
-/*
- * Some older drivers depend on the old API,
- * so provide compatability macros for now.
- */
-#define alarm android_alarm
-#define alarm_init(x, y, z) android_alarm_init(x, y, z)
-#define alarm_start_range(x, y, z) android_alarm_start_range(x, y, z)
-#define alarm_try_to_cancel(x) android_alarm_try_to_cancel(x)
-#define alarm_cancel(x) android_alarm_cancel(x)
-#define alarm_set_rtc(x) android_alarm_set_rtc(x)
-#endif
-
-
-#endif
-
 enum android_alarm_return_flags {
 	ANDROID_ALARM_RTC_WAKEUP_MASK = 1U << ANDROID_ALARM_RTC_WAKEUP,
 	ANDROID_ALARM_RTC_MASK = 1U << ANDROID_ALARM_RTC,
diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h
index 25ab6f2759e9..2f7d195d8b15 100644
--- a/drivers/staging/android/binder.h
+++ b/drivers/staging/android/binder.h
@@ -53,17 +53,17 @@ struct flat_binder_object {
 
 	/* 8 bytes of data. */
 	union {
-		void		*binder;	/* local object */
+		void __user	*binder;	/* local object */
 		signed long	handle;		/* remote object */
 	};
 
 	/* extra data associated with local object */
-	void			*cookie;
+	void __user		*cookie;
 };
 
 /*
  * On 64-bit platforms where user code may run in 32-bits the driver must
- * translate the buffer (and local binder) addresses apropriately.
+ * translate the buffer (and local binder) addresses appropriately.
  */
 
 struct binder_write_read {
@@ -139,9 +139,9 @@ struct binder_transaction_data {
 	union {
 		struct {
 			/* transaction data */
-			const void	*buffer;
+			const void __user	*buffer;
 			/* offsets from buffer to flat_binder_object structs */
-			const void	*offsets;
+			const void __user	*offsets;
 		} ptr;
 		uint8_t	buf[8];
 	} data;
diff --git a/drivers/staging/android/logger.c b/drivers/staging/android/logger.c
index ea69b6a77dac..b2e71c6fd175 100644
--- a/drivers/staging/android/logger.c
+++ b/drivers/staging/android/logger.c
@@ -25,6 +25,7 @@
 #include <linux/poll.h>
 #include <linux/slab.h>
 #include <linux/time.h>
+#include <linux/vmalloc.h>
 #include "logger.h"
 
 #include <asm/ioctls.h>
@@ -45,8 +46,12 @@ struct logger_log {
 	size_t			w_off;	/* current write head offset */
 	size_t			head;	/* new readers start here */
 	size_t			size;	/* size of the log */
+	struct list_head	logs;	/* list of log channels (myself)*/
 };
 
+static LIST_HEAD(log_list);
+
+
 /*
  * struct logger_reader - a logging device open for reading
  *
@@ -60,9 +65,9 @@ struct logger_reader {
 };
 
 /* logger_offset - returns index 'n' into the log via (optimized) modulus */
-size_t logger_offset(struct logger_log *log, size_t n)
+static size_t logger_offset(struct logger_log *log, size_t n)
 {
-	return n & (log->size-1);
+	return n & (log->size - 1);
 }
 
 
@@ -348,7 +353,7 @@ static ssize_t do_write_log_from_user(struct logger_log *log,
  * writev(), and aio_write(). Writes are our fast path, and we try to optimize
  * them above all else.
  */
-ssize_t logger_aio_write(struct kiocb *iocb, const struct iovec *iov,
+static ssize_t logger_aio_write(struct kiocb *iocb, const struct iovec *iov,
 			 unsigned long nr_segs, loff_t ppos)
 {
 	struct logger_log *log = file_get_log(iocb->ki_filp);
@@ -408,7 +413,15 @@ ssize_t logger_aio_write(struct kiocb *iocb, const struct iovec *iov,
 	return ret;
 }
 
-static struct logger_log *get_log_from_minor(int);
+static struct logger_log *get_log_from_minor(int minor)
+{
+	struct logger_log *log;
+
+	list_for_each_entry(log, &log_list, logs)
+		if (log->misc.minor == minor)
+			return log;
+	return NULL;
+}
 
 /*
  * logger_open - the log's open() file operation
@@ -565,80 +578,84 @@ static const struct file_operations logger_fops = {
 };
 
 /*
- * Defines a log structure with name 'NAME' and a size of 'SIZE' bytes, which
- * must be a power of two, greater than LOGGER_ENTRY_MAX_LEN, and less than
- * LONG_MAX minus LOGGER_ENTRY_MAX_LEN.
+ * Log size must be a power of two, greater than LOGGER_ENTRY_MAX_LEN,
+ * and less than LONG_MAX minus LOGGER_ENTRY_MAX_LEN.
  */
-#define DEFINE_LOGGER_DEVICE(VAR, NAME, SIZE) \
-static unsigned char _buf_ ## VAR[SIZE]; \
-static struct logger_log VAR = { \
-	.buffer = _buf_ ## VAR, \
-	.misc = { \
-		.minor = MISC_DYNAMIC_MINOR, \
-		.name = NAME, \
-		.fops = &logger_fops, \
-		.parent = NULL, \
-	}, \
-	.wq = __WAIT_QUEUE_HEAD_INITIALIZER(VAR .wq), \
-	.readers = LIST_HEAD_INIT(VAR .readers), \
-	.mutex = __MUTEX_INITIALIZER(VAR .mutex), \
-	.w_off = 0, \
-	.head = 0, \
-	.size = SIZE, \
-};
+static int __init create_log(char *log_name, int size)
+{
+	int ret = 0;
+	struct logger_log *log;
+	unsigned char *buffer;
 
-DEFINE_LOGGER_DEVICE(log_main, LOGGER_LOG_MAIN, 256*1024)
-DEFINE_LOGGER_DEVICE(log_events, LOGGER_LOG_EVENTS, 256*1024)
-DEFINE_LOGGER_DEVICE(log_radio, LOGGER_LOG_RADIO, 256*1024)
-DEFINE_LOGGER_DEVICE(log_system, LOGGER_LOG_SYSTEM, 256*1024)
+	buffer = vmalloc(size);
+	if (buffer == NULL)
+		return -ENOMEM;
 
-static struct logger_log *get_log_from_minor(int minor)
-{
-	if (log_main.misc.minor == minor)
-		return &log_main;
-	if (log_events.misc.minor == minor)
-		return &log_events;
-	if (log_radio.misc.minor == minor)
-		return &log_radio;
-	if (log_system.misc.minor == minor)
-		return &log_system;
-	return NULL;
-}
+	log = kzalloc(sizeof(struct logger_log), GFP_KERNEL);
+	if (log == NULL) {
+		ret = -ENOMEM;
+		goto out_free_buffer;
+	}
+	log->buffer = buffer;
 
-static int __init init_log(struct logger_log *log)
-{
-	int ret;
+	log->misc.minor = MISC_DYNAMIC_MINOR;
+	log->misc.name = kstrdup(log_name, GFP_KERNEL);
+	if (log->misc.name == NULL) {
+		ret = -ENOMEM;
+		goto out_free_log;
+	}
+
+	log->misc.fops = &logger_fops;
+	log->misc.parent = NULL;
 
+	init_waitqueue_head(&log->wq);
+	INIT_LIST_HEAD(&log->readers);
+	mutex_init(&log->mutex);
+	log->w_off = 0;
+	log->head = 0;
+	log->size = size;
+
+	INIT_LIST_HEAD(&log->logs);
+	list_add_tail(&log->logs, &log_list);
+
+	/* finally, initialize the misc device for this log */
 	ret = misc_register(&log->misc);
 	if (unlikely(ret)) {
 		printk(KERN_ERR "logger: failed to register misc "
 		       "device for log '%s'!\n", log->misc.name);
-		return ret;
+		goto out_free_log;
 	}
 
 	printk(KERN_INFO "logger: created %luK log '%s'\n",
 	       (unsigned long) log->size >> 10, log->misc.name);
 
 	return 0;
+
+out_free_log:
+	kfree(log);
+
+out_free_buffer:
+	vfree(buffer);
+	return ret;
 }
 
 static int __init logger_init(void)
 {
 	int ret;
 
-	ret = init_log(&log_main);
+	ret = create_log(LOGGER_LOG_MAIN, 256*1024);
 	if (unlikely(ret))
 		goto out;
 
-	ret = init_log(&log_events);
+	ret = create_log(LOGGER_LOG_EVENTS, 256*1024);
 	if (unlikely(ret))
 		goto out;
 
-	ret = init_log(&log_radio);
+	ret = create_log(LOGGER_LOG_RADIO, 256*1024);
 	if (unlikely(ret))
 		goto out;
 
-	ret = init_log(&log_system);
+	ret = create_log(LOGGER_LOG_SYSTEM, 256*1024);
 	if (unlikely(ret))
 		goto out;
 
diff --git a/drivers/staging/android/persistent_ram.c b/drivers/staging/android/persistent_ram.c
deleted file mode 100644
index 8d8c1e33e0ff..000000000000
--- a/drivers/staging/android/persistent_ram.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/*
- * Copyright (C) 2012 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/rslib.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include "persistent_ram.h"
-
-struct persistent_ram_buffer {
-	uint32_t    sig;
-	atomic_t    start;
-	atomic_t    size;
-	uint8_t     data[0];
-};
-
-#define PERSISTENT_RAM_SIG (0x43474244) /* DBGC */
-
-static __initdata LIST_HEAD(persistent_ram_list);
-
-static inline size_t buffer_size(struct persistent_ram_zone *prz)
-{
-	return atomic_read(&prz->buffer->size);
-}
-
-static inline size_t buffer_start(struct persistent_ram_zone *prz)
-{
-	return atomic_read(&prz->buffer->start);
-}
-
-/* increase and wrap the start pointer, returning the old value */
-static inline size_t buffer_start_add(struct persistent_ram_zone *prz, size_t a)
-{
-	int old;
-	int new;
-
-	do {
-		old = atomic_read(&prz->buffer->start);
-		new = old + a;
-		while (unlikely(new > prz->buffer_size))
-			new -= prz->buffer_size;
-	} while (atomic_cmpxchg(&prz->buffer->start, old, new) != old);
-
-	return old;
-}
-
-/* increase the size counter until it hits the max size */
-static inline void buffer_size_add(struct persistent_ram_zone *prz, size_t a)
-{
-	size_t old;
-	size_t new;
-
-	if (atomic_read(&prz->buffer->size) == prz->buffer_size)
-		return;
-
-	do {
-		old = atomic_read(&prz->buffer->size);
-		new = old + a;
-		if (new > prz->buffer_size)
-			new = prz->buffer_size;
-	} while (atomic_cmpxchg(&prz->buffer->size, old, new) != old);
-}
-
-/* increase the size counter, retuning an error if it hits the max size */
-static inline ssize_t buffer_size_add_clamp(struct persistent_ram_zone *prz,
-	size_t a)
-{
-	size_t old;
-	size_t new;
-
-	do {
-		old = atomic_read(&prz->buffer->size);
-		new = old + a;
-		if (new > prz->buffer_size)
-			return -ENOMEM;
-	} while (atomic_cmpxchg(&prz->buffer->size, old, new) != old);
-
-	return 0;
-}
-
-static void notrace persistent_ram_encode_rs8(struct persistent_ram_zone *prz,
-	uint8_t *data, size_t len, uint8_t *ecc)
-{
-	int i;
-	uint16_t par[prz->ecc_size];
-
-	/* Initialize the parity buffer */
-	memset(par, 0, sizeof(par));
-	encode_rs8(prz->rs_decoder, data, len, par, 0);
-	for (i = 0; i < prz->ecc_size; i++)
-		ecc[i] = par[i];
-}
-
-static int persistent_ram_decode_rs8(struct persistent_ram_zone *prz,
-	void *data, size_t len, uint8_t *ecc)
-{
-	int i;
-	uint16_t par[prz->ecc_size];
-
-	for (i = 0; i < prz->ecc_size; i++)
-		par[i] = ecc[i];
-	return decode_rs8(prz->rs_decoder, data, par, len,
-				NULL, 0, NULL, 0, NULL);
-}
-
-static void notrace persistent_ram_update_ecc(struct persistent_ram_zone *prz,
-	unsigned int start, unsigned int count)
-{
-	struct persistent_ram_buffer *buffer = prz->buffer;
-	uint8_t *buffer_end = buffer->data + prz->buffer_size;
-	uint8_t *block;
-	uint8_t *par;
-	int ecc_block_size = prz->ecc_block_size;
-	int ecc_size = prz->ecc_size;
-	int size = prz->ecc_block_size;
-
-	if (!prz->ecc)
-		return;
-
-	block = buffer->data + (start & ~(ecc_block_size - 1));
-	par = prz->par_buffer + (start / ecc_block_size) * prz->ecc_size;
-
-	do {
-		if (block + ecc_block_size > buffer_end)
-			size = buffer_end - block;
-		persistent_ram_encode_rs8(prz, block, size, par);
-		block += ecc_block_size;
-		par += ecc_size;
-	} while (block < buffer->data + start + count);
-}
-
-static void persistent_ram_update_header_ecc(struct persistent_ram_zone *prz)
-{
-	struct persistent_ram_buffer *buffer = prz->buffer;
-
-	if (!prz->ecc)
-		return;
-
-	persistent_ram_encode_rs8(prz, (uint8_t *)buffer, sizeof(*buffer),
-				  prz->par_header);
-}
-
-static void persistent_ram_ecc_old(struct persistent_ram_zone *prz)
-{
-	struct persistent_ram_buffer *buffer = prz->buffer;
-	uint8_t *block;
-	uint8_t *par;
-
-	if (!prz->ecc)
-		return;
-
-	block = buffer->data;
-	par = prz->par_buffer;
-	while (block < buffer->data + buffer_size(prz)) {
-		int numerr;
-		int size = prz->ecc_block_size;
-		if (block + size > buffer->data + prz->buffer_size)
-			size = buffer->data + prz->buffer_size - block;
-		numerr = persistent_ram_decode_rs8(prz, block, size, par);
-		if (numerr > 0) {
-			pr_devel("persistent_ram: error in block %p, %d\n",
-			       block, numerr);
-			prz->corrected_bytes += numerr;
-		} else if (numerr < 0) {
-			pr_devel("persistent_ram: uncorrectable error in block %p\n",
-				block);
-			prz->bad_blocks++;
-		}
-		block += prz->ecc_block_size;
-		par += prz->ecc_size;
-	}
-}
-
-static int persistent_ram_init_ecc(struct persistent_ram_zone *prz,
-	size_t buffer_size)
-{
-	int numerr;
-	struct persistent_ram_buffer *buffer = prz->buffer;
-	int ecc_blocks;
-
-	if (!prz->ecc)
-		return 0;
-
-	prz->ecc_block_size = 128;
-	prz->ecc_size = 16;
-	prz->ecc_symsize = 8;
-	prz->ecc_poly = 0x11d;
-
-	ecc_blocks = DIV_ROUND_UP(prz->buffer_size, prz->ecc_block_size);
-	prz->buffer_size -= (ecc_blocks + 1) * prz->ecc_size;
-
-	if (prz->buffer_size > buffer_size) {
-		pr_err("persistent_ram: invalid size %zu, non-ecc datasize %zu\n",
-		       buffer_size, prz->buffer_size);
-		return -EINVAL;
-	}
-
-	prz->par_buffer = buffer->data + prz->buffer_size;
-	prz->par_header = prz->par_buffer + ecc_blocks * prz->ecc_size;
-
-	/*
-	 * first consecutive root is 0
-	 * primitive element to generate roots = 1
-	 */
-	prz->rs_decoder = init_rs(prz->ecc_symsize, prz->ecc_poly, 0, 1,
-				  prz->ecc_size);
-	if (prz->rs_decoder == NULL) {
-		pr_info("persistent_ram: init_rs failed\n");
-		return -EINVAL;
-	}
-
-	prz->corrected_bytes = 0;
-	prz->bad_blocks = 0;
-
-	numerr = persistent_ram_decode_rs8(prz, buffer, sizeof(*buffer),
-					   prz->par_header);
-	if (numerr > 0) {
-		pr_info("persistent_ram: error in header, %d\n", numerr);
-		prz->corrected_bytes += numerr;
-	} else if (numerr < 0) {
-		pr_info("persistent_ram: uncorrectable error in header\n");
-		prz->bad_blocks++;
-	}
-
-	return 0;
-}
-
-ssize_t persistent_ram_ecc_string(struct persistent_ram_zone *prz,
-	char *str, size_t len)
-{
-	ssize_t ret;
-
-	if (prz->corrected_bytes || prz->bad_blocks)
-		ret = snprintf(str, len, ""
-			"\n%d Corrected bytes, %d unrecoverable blocks\n",
-			prz->corrected_bytes, prz->bad_blocks);
-	else
-		ret = snprintf(str, len, "\nNo errors detected\n");
-
-	return ret;
-}
-
-static void notrace persistent_ram_update(struct persistent_ram_zone *prz,
-	const void *s, unsigned int start, unsigned int count)
-{
-	struct persistent_ram_buffer *buffer = prz->buffer;
-	memcpy(buffer->data + start, s, count);
-	persistent_ram_update_ecc(prz, start, count);
-}
-
-static void __init
-persistent_ram_save_old(struct persistent_ram_zone *prz)
-{
-	struct persistent_ram_buffer *buffer = prz->buffer;
-	size_t size = buffer_size(prz);
-	size_t start = buffer_start(prz);
-	char *dest;
-
-	persistent_ram_ecc_old(prz);
-
-	dest = kmalloc(size, GFP_KERNEL);
-	if (dest == NULL) {
-		pr_err("persistent_ram: failed to allocate buffer\n");
-		return;
-	}
-
-	prz->old_log = dest;
-	prz->old_log_size = size;
-	memcpy(prz->old_log, &buffer->data[start], size - start);
-	memcpy(prz->old_log + size - start, &buffer->data[0], start);
-}
-
-int notrace persistent_ram_write(struct persistent_ram_zone *prz,
-	const void *s, unsigned int count)
-{
-	int rem;
-	int c = count;
-	size_t start;
-
-	if (unlikely(c > prz->buffer_size)) {
-		s += c - prz->buffer_size;
-		c = prz->buffer_size;
-	}
-
-	buffer_size_add_clamp(prz, c);
-
-	start = buffer_start_add(prz, c);
-
-	rem = prz->buffer_size - start;
-	if (unlikely(rem < c)) {
-		persistent_ram_update(prz, s, start, rem);
-		s += rem;
-		c -= rem;
-		start = 0;
-	}
-	persistent_ram_update(prz, s, start, c);
-
-	persistent_ram_update_header_ecc(prz);
-
-	return count;
-}
-
-size_t persistent_ram_old_size(struct persistent_ram_zone *prz)
-{
-	return prz->old_log_size;
-}
-
-void *persistent_ram_old(struct persistent_ram_zone *prz)
-{
-	return prz->old_log;
-}
-
-void persistent_ram_free_old(struct persistent_ram_zone *prz)
-{
-	kfree(prz->old_log);
-	prz->old_log = NULL;
-	prz->old_log_size = 0;
-}
-
-static int persistent_ram_buffer_map(phys_addr_t start, phys_addr_t size,
-		struct persistent_ram_zone *prz)
-{
-	struct page **pages;
-	phys_addr_t page_start;
-	unsigned int page_count;
-	pgprot_t prot;
-	unsigned int i;
-
-	page_start = start - offset_in_page(start);
-	page_count = DIV_ROUND_UP(size + offset_in_page(start), PAGE_SIZE);
-
-	prot = pgprot_noncached(PAGE_KERNEL);
-
-	pages = kmalloc(sizeof(struct page *) * page_count, GFP_KERNEL);
-	if (!pages) {
-		pr_err("%s: Failed to allocate array for %u pages\n", __func__,
-			page_count);
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < page_count; i++) {
-		phys_addr_t addr = page_start + i * PAGE_SIZE;
-		pages[i] = pfn_to_page(addr >> PAGE_SHIFT);
-	}
-	prz->vaddr = vmap(pages, page_count, VM_MAP, prot);
-	kfree(pages);
-	if (!prz->vaddr) {
-		pr_err("%s: Failed to map %u pages\n", __func__, page_count);
-		return -ENOMEM;
-	}
-
-	prz->buffer = prz->vaddr + offset_in_page(start);
-	prz->buffer_size = size - sizeof(struct persistent_ram_buffer);
-
-	return 0;
-}
-
-static int __init persistent_ram_buffer_init(const char *name,
-		struct persistent_ram_zone *prz)
-{
-	int i;
-	struct persistent_ram *ram;
-	struct persistent_ram_descriptor *desc;
-	phys_addr_t start;
-
-	list_for_each_entry(ram, &persistent_ram_list, node) {
-		start = ram->start;
-		for (i = 0; i < ram->num_descs; i++) {
-			desc = &ram->descs[i];
-			if (!strcmp(desc->name, name))
-				return persistent_ram_buffer_map(start,
-						desc->size, prz);
-			start += desc->size;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static  __init
-struct persistent_ram_zone *__persistent_ram_init(struct device *dev, bool ecc)
-{
-	struct persistent_ram_zone *prz;
-	int ret = -ENOMEM;
-
-	prz = kzalloc(sizeof(struct persistent_ram_zone), GFP_KERNEL);
-	if (!prz) {
-		pr_err("persistent_ram: failed to allocate persistent ram zone\n");
-		goto err;
-	}
-
-	INIT_LIST_HEAD(&prz->node);
-
-	ret = persistent_ram_buffer_init(dev_name(dev), prz);
-	if (ret) {
-		pr_err("persistent_ram: failed to initialize buffer\n");
-		goto err;
-	}
-
-	prz->ecc = ecc;
-	ret = persistent_ram_init_ecc(prz, prz->buffer_size);
-	if (ret)
-		goto err;
-
-	if (prz->buffer->sig == PERSISTENT_RAM_SIG) {
-		if (buffer_size(prz) > prz->buffer_size ||
-		    buffer_start(prz) > buffer_size(prz))
-			pr_info("persistent_ram: found existing invalid buffer,"
-				" size %ld, start %ld\n",
-			       buffer_size(prz), buffer_start(prz));
-		else {
-			pr_info("persistent_ram: found existing buffer,"
-				" size %ld, start %ld\n",
-			       buffer_size(prz), buffer_start(prz));
-			persistent_ram_save_old(prz);
-		}
-	} else {
-		pr_info("persistent_ram: no valid data in buffer"
-			" (sig = 0x%08x)\n", prz->buffer->sig);
-	}
-
-	prz->buffer->sig = PERSISTENT_RAM_SIG;
-	atomic_set(&prz->buffer->start, 0);
-	atomic_set(&prz->buffer->size, 0);
-
-	return prz;
-err:
-	kfree(prz);
-	return ERR_PTR(ret);
-}
-
-struct persistent_ram_zone * __init
-persistent_ram_init_ringbuffer(struct device *dev, bool ecc)
-{
-	return __persistent_ram_init(dev, ecc);
-}
-
-int __init persistent_ram_early_init(struct persistent_ram *ram)
-{
-	int ret;
-
-	ret = memblock_reserve(ram->start, ram->size);
-	if (ret) {
-		pr_err("Failed to reserve persistent memory from %08lx-%08lx\n",
-			(long)ram->start, (long)(ram->start + ram->size - 1));
-		return ret;
-	}
-
-	list_add_tail(&ram->node, &persistent_ram_list);
-
-	pr_info("Initialized persistent memory from %08lx-%08lx\n",
-		(long)ram->start, (long)(ram->start + ram->size - 1));
-
-	return 0;
-}
diff --git a/drivers/staging/android/persistent_ram.h b/drivers/staging/android/persistent_ram.h
deleted file mode 100644
index f41e2086c645..000000000000
--- a/drivers/staging/android/persistent_ram.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2011 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __LINUX_PERSISTENT_RAM_H__
-#define __LINUX_PERSISTENT_RAM_H__
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/types.h>
-
-struct persistent_ram_buffer;
-
-struct persistent_ram_descriptor {
-	const char	*name;
-	phys_addr_t	size;
-};
-
-struct persistent_ram {
-	phys_addr_t	start;
-	phys_addr_t	size;
-
-	int					num_descs;
-	struct persistent_ram_descriptor	*descs;
-
-	struct list_head node;
-};
-
-struct persistent_ram_zone {
-	struct list_head node;
-	void *vaddr;
-	struct persistent_ram_buffer *buffer;
-	size_t buffer_size;
-
-	/* ECC correction */
-	bool ecc;
-	char *par_buffer;
-	char *par_header;
-	struct rs_control *rs_decoder;
-	int corrected_bytes;
-	int bad_blocks;
-	int ecc_block_size;
-	int ecc_size;
-	int ecc_symsize;
-	int ecc_poly;
-
-	char *old_log;
-	size_t old_log_size;
-	size_t old_log_footer_size;
-	bool early;
-};
-
-int persistent_ram_early_init(struct persistent_ram *ram);
-
-struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
-		bool ecc);
-
-int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
-	unsigned int count);
-
-size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
-void *persistent_ram_old(struct persistent_ram_zone *prz);
-void persistent_ram_free_old(struct persistent_ram_zone *prz);
-ssize_t persistent_ram_ecc_string(struct persistent_ram_zone *prz,
-	char *str, size_t len);
-
-#endif
diff --git a/drivers/staging/android/ram_console.c b/drivers/staging/android/ram_console.c
index ce140ffc54ea..82323bb1d1a3 100644
--- a/drivers/staging/android/ram_console.c
+++ b/drivers/staging/android/ram_console.c
@@ -21,7 +21,7 @@
 #include <linux/string.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
-#include "persistent_ram.h"
+#include <linux/pstore_ram.h>
 #include "ram_console.h"
 
 static struct persistent_ram_zone *ram_console_zone;
diff --git a/drivers/staging/android/switch/Kconfig b/drivers/staging/android/switch/Kconfig
deleted file mode 100644
index 36846f62f4bc..000000000000
--- a/drivers/staging/android/switch/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-menuconfig ANDROID_SWITCH
-	tristate "Android Switch class support"
-	help
-	  Say Y here to enable Android switch class support. This allows
-	  monitoring switches by userspace via sysfs and uevent.
-
-config ANDROID_SWITCH_GPIO
-	tristate "Android GPIO Switch support"
-	depends on GENERIC_GPIO && ANDROID_SWITCH
-	help
-	  Say Y here to enable GPIO based switch support.
diff --git a/drivers/staging/android/switch/Makefile b/drivers/staging/android/switch/Makefile
deleted file mode 100644
index d76bfdcedfaf..000000000000
--- a/drivers/staging/android/switch/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# Android Switch Class Driver
-obj-$(CONFIG_ANDROID_SWITCH)		+= switch_class.o
-obj-$(CONFIG_ANDROID_SWITCH_GPIO)	+= switch_gpio.o
-
diff --git a/drivers/staging/android/switch/switch.h b/drivers/staging/android/switch/switch.h
deleted file mode 100644
index 4fcb3109875a..000000000000
--- a/drivers/staging/android/switch/switch.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  Switch class driver
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-*/
-
-#ifndef __LINUX_SWITCH_H__
-#define __LINUX_SWITCH_H__
-
-struct switch_dev {
-	const char	*name;
-	struct device	*dev;
-	int		index;
-	int		state;
-
-	ssize_t	(*print_name)(struct switch_dev *sdev, char *buf);
-	ssize_t	(*print_state)(struct switch_dev *sdev, char *buf);
-};
-
-struct gpio_switch_platform_data {
-	const char *name;
-	unsigned	gpio;
-
-	/* if NULL, switch_dev.name will be printed */
-	const char *name_on;
-	const char *name_off;
-	/* if NULL, "0" or "1" will be printed */
-	const char *state_on;
-	const char *state_off;
-};
-
-extern int switch_dev_register(struct switch_dev *sdev);
-extern void switch_dev_unregister(struct switch_dev *sdev);
-
-static inline int switch_get_state(struct switch_dev *sdev)
-{
-	return sdev->state;
-}
-
-extern void switch_set_state(struct switch_dev *sdev, int state);
-
-#endif /* __LINUX_SWITCH_H__ */
diff --git a/drivers/staging/android/switch/switch_class.c b/drivers/staging/android/switch/switch_class.c
deleted file mode 100644
index 74680446fc66..000000000000
--- a/drivers/staging/android/switch/switch_class.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * switch_class.c
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/err.h>
-#include "switch.h"
-
-struct class *switch_class;
-static atomic_t device_count;
-
-static ssize_t state_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct switch_dev *sdev = (struct switch_dev *)
-		dev_get_drvdata(dev);
-
-	if (sdev->print_state) {
-		int ret = sdev->print_state(sdev, buf);
-		if (ret >= 0)
-			return ret;
-	}
-	return sprintf(buf, "%d\n", sdev->state);
-}
-
-static ssize_t name_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct switch_dev *sdev = (struct switch_dev *)
-		dev_get_drvdata(dev);
-
-	if (sdev->print_name) {
-		int ret = sdev->print_name(sdev, buf);
-		if (ret >= 0)
-			return ret;
-	}
-	return sprintf(buf, "%s\n", sdev->name);
-}
-
-static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, state_show, NULL);
-static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, name_show, NULL);
-
-void switch_set_state(struct switch_dev *sdev, int state)
-{
-	char name_buf[120];
-	char state_buf[120];
-	char *prop_buf;
-	char *envp[3];
-	int env_offset = 0;
-	int length;
-
-	if (sdev->state != state) {
-		sdev->state = state;
-
-		prop_buf = (char *)get_zeroed_page(GFP_KERNEL);
-		if (prop_buf) {
-			length = name_show(sdev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(name_buf, sizeof(name_buf),
-					"SWITCH_NAME=%s", prop_buf);
-				envp[env_offset++] = name_buf;
-			}
-			length = state_show(sdev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(state_buf, sizeof(state_buf),
-					"SWITCH_STATE=%s", prop_buf);
-				envp[env_offset++] = state_buf;
-			}
-			envp[env_offset] = NULL;
-			kobject_uevent_env(&sdev->dev->kobj, KOBJ_CHANGE, envp);
-			free_page((unsigned long)prop_buf);
-		} else {
-			printk(KERN_ERR "out of memory in switch_set_state\n");
-			kobject_uevent(&sdev->dev->kobj, KOBJ_CHANGE);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(switch_set_state);
-
-static int create_switch_class(void)
-{
-	if (!switch_class) {
-		switch_class = class_create(THIS_MODULE, "switch");
-		if (IS_ERR(switch_class))
-			return PTR_ERR(switch_class);
-		atomic_set(&device_count, 0);
-	}
-
-	return 0;
-}
-
-int switch_dev_register(struct switch_dev *sdev)
-{
-	int ret;
-
-	if (!switch_class) {
-		ret = create_switch_class();
-		if (ret < 0)
-			return ret;
-	}
-
-	sdev->index = atomic_inc_return(&device_count);
-	sdev->dev = device_create(switch_class, NULL,
-		MKDEV(0, sdev->index), NULL, sdev->name);
-	if (IS_ERR(sdev->dev))
-		return PTR_ERR(sdev->dev);
-
-	ret = device_create_file(sdev->dev, &dev_attr_state);
-	if (ret < 0)
-		goto err_create_file_1;
-	ret = device_create_file(sdev->dev, &dev_attr_name);
-	if (ret < 0)
-		goto err_create_file_2;
-
-	dev_set_drvdata(sdev->dev, sdev);
-	sdev->state = 0;
-	return 0;
-
-err_create_file_2:
-	device_remove_file(sdev->dev, &dev_attr_state);
-err_create_file_1:
-	device_destroy(switch_class, MKDEV(0, sdev->index));
-	printk(KERN_ERR "switch: Failed to register driver %s\n", sdev->name);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(switch_dev_register);
-
-void switch_dev_unregister(struct switch_dev *sdev)
-{
-	device_remove_file(sdev->dev, &dev_attr_name);
-	device_remove_file(sdev->dev, &dev_attr_state);
-	device_destroy(switch_class, MKDEV(0, sdev->index));
-	dev_set_drvdata(sdev->dev, NULL);
-}
-EXPORT_SYMBOL_GPL(switch_dev_unregister);
-
-static int __init switch_class_init(void)
-{
-	return create_switch_class();
-}
-
-static void __exit switch_class_exit(void)
-{
-	class_destroy(switch_class);
-}
-
-module_init(switch_class_init);
-module_exit(switch_class_exit);
-
-MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
-MODULE_DESCRIPTION("Switch class driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/android/switch/switch_gpio.c b/drivers/staging/android/switch/switch_gpio.c
deleted file mode 100644
index 38b2c2f6004e..000000000000
--- a/drivers/staging/android/switch/switch_gpio.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * switch_gpio.c
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/gpio.h>
-#include "switch.h"
-
-struct gpio_switch_data {
-	struct switch_dev sdev;
-	unsigned gpio;
-	const char *name_on;
-	const char *name_off;
-	const char *state_on;
-	const char *state_off;
-	int irq;
-	struct work_struct work;
-};
-
-static void gpio_switch_work(struct work_struct *work)
-{
-	int state;
-	struct gpio_switch_data	*data =
-		container_of(work, struct gpio_switch_data, work);
-
-	state = gpio_get_value(data->gpio);
-	switch_set_state(&data->sdev, state);
-}
-
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
-{
-	struct gpio_switch_data *switch_data =
-	    (struct gpio_switch_data *)dev_id;
-
-	schedule_work(&switch_data->work);
-	return IRQ_HANDLED;
-}
-
-static ssize_t switch_gpio_print_state(struct switch_dev *sdev, char *buf)
-{
-	struct gpio_switch_data	*switch_data =
-		container_of(sdev, struct gpio_switch_data, sdev);
-	const char *state;
-	if (switch_get_state(sdev))
-		state = switch_data->state_on;
-	else
-		state = switch_data->state_off;
-
-	if (state)
-		return sprintf(buf, "%s\n", state);
-	return -1;
-}
-
-static int gpio_switch_probe(struct platform_device *pdev)
-{
-	struct gpio_switch_platform_data *pdata = pdev->dev.platform_data;
-	struct gpio_switch_data *switch_data;
-	int ret = 0;
-
-	if (!pdata)
-		return -EBUSY;
-
-	switch_data = kzalloc(sizeof(struct gpio_switch_data), GFP_KERNEL);
-	if (!switch_data)
-		return -ENOMEM;
-
-	switch_data->sdev.name = pdata->name;
-	switch_data->gpio = pdata->gpio;
-	switch_data->name_on = pdata->name_on;
-	switch_data->name_off = pdata->name_off;
-	switch_data->state_on = pdata->state_on;
-	switch_data->state_off = pdata->state_off;
-	switch_data->sdev.print_state = switch_gpio_print_state;
-
-	ret = switch_dev_register(&switch_data->sdev);
-	if (ret < 0)
-		goto err_switch_dev_register;
-
-	ret = gpio_request(switch_data->gpio, pdev->name);
-	if (ret < 0)
-		goto err_request_gpio;
-
-	ret = gpio_direction_input(switch_data->gpio);
-	if (ret < 0)
-		goto err_set_gpio_input;
-
-	INIT_WORK(&switch_data->work, gpio_switch_work);
-
-	switch_data->irq = gpio_to_irq(switch_data->gpio);
-	if (switch_data->irq < 0) {
-		ret = switch_data->irq;
-		goto err_detect_irq_num_failed;
-	}
-
-	ret = request_irq(switch_data->irq, gpio_irq_handler,
-			  IRQF_TRIGGER_LOW, pdev->name, switch_data);
-	if (ret < 0)
-		goto err_request_irq;
-
-	/* Perform initial detection */
-	gpio_switch_work(&switch_data->work);
-
-	return 0;
-
-err_request_irq:
-err_detect_irq_num_failed:
-err_set_gpio_input:
-	gpio_free(switch_data->gpio);
-err_request_gpio:
-	switch_dev_unregister(&switch_data->sdev);
-err_switch_dev_register:
-	kfree(switch_data);
-
-	return ret;
-}
-
-static int __devexit gpio_switch_remove(struct platform_device *pdev)
-{
-	struct gpio_switch_data *switch_data = platform_get_drvdata(pdev);
-
-	cancel_work_sync(&switch_data->work);
-	gpio_free(switch_data->gpio);
-	switch_dev_unregister(&switch_data->sdev);
-	kfree(switch_data);
-
-	return 0;
-}
-
-static struct platform_driver gpio_switch_driver = {
-	.probe		= gpio_switch_probe,
-	.remove		= __devexit_p(gpio_switch_remove),
-	.driver		= {
-		.name	= "switch-gpio",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init gpio_switch_init(void)
-{
-	return platform_driver_register(&gpio_switch_driver);
-}
-
-static void __exit gpio_switch_exit(void)
-{
-	platform_driver_unregister(&gpio_switch_driver);
-}
-
-module_init(gpio_switch_init);
-module_exit(gpio_switch_exit);
-
-MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
-MODULE_DESCRIPTION("GPIO Switch driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/android/timed_output.c b/drivers/staging/android/timed_output.c
index f373422308e0..38d930cadad3 100644
--- a/drivers/staging/android/timed_output.c
+++ b/drivers/staging/android/timed_output.c
@@ -99,6 +99,7 @@ EXPORT_SYMBOL_GPL(timed_output_dev_register);
 
 void timed_output_dev_unregister(struct timed_output_dev *tdev)
 {
+	tdev->enable(tdev, 0);
 	device_remove_file(tdev->dev, &dev_attr_enable);
 	device_destroy(timed_output_class, MKDEV(0, tdev->index));
 	dev_set_drvdata(tdev->dev, NULL);
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index 83549d9cfefc..510d79639217 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -782,20 +782,20 @@ static int __init asus_oled_init(void)
 	oled_class = class_create(THIS_MODULE, ASUS_OLED_UNDERSCORE_NAME);
 
 	if (IS_ERR(oled_class)) {
-		err("Error creating " ASUS_OLED_UNDERSCORE_NAME " class");
+		printk(KERN_ERR "Error creating " ASUS_OLED_UNDERSCORE_NAME " class\n");
 		return PTR_ERR(oled_class);
 	}
 
 	retval = class_create_file(oled_class, &class_attr_version.attr);
 	if (retval) {
-		err("Error creating class version file");
+		printk(KERN_ERR "Error creating class version file\n");
 		goto error;
 	}
 
 	retval = usb_register(&oled_driver);
 
 	if (retval) {
-		err("usb_register failed. Error number %d", retval);
+		printk(KERN_ERR "usb_register failed. Error number %d\n", retval);
 		goto error;
 	}
 
diff --git a/drivers/staging/bcm/Adapter.h b/drivers/staging/bcm/Adapter.h
index 20cca24ff5f0..aa51d17be5a1 100644
--- a/drivers/staging/bcm/Adapter.h
+++ b/drivers/staging/bcm/Adapter.h
@@ -7,168 +7,145 @@
 #define MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES 256
 #include "Debug.h"
 
-struct _LEADER
-{
-	USHORT 	Vcid;
-	USHORT 	PLength;
-	UCHAR  	Status;
+struct _LEADER {
+	USHORT	Vcid;
+	USHORT	PLength;
+	UCHAR	Status;
 	UCHAR	Unused[3];
-}__attribute__((packed));
-typedef struct _LEADER LEADER,*PLEADER;
+} __packed;
+typedef struct _LEADER LEADER, *PLEADER;
 
-struct _PACKETTOSEND
-{
+struct _PACKETTOSEND {
 	LEADER	Leader;
 	UCHAR	ucPayload;
-}__attribute__((packed));
+} __packed;
 typedef struct _PACKETTOSEND PACKETTOSEND, *PPACKETTOSEND;
 
-
-struct _CONTROL_PACKET
-{
+struct _CONTROL_PACKET {
 	PVOID	ControlBuff;
 	UINT	ControlBuffLen;
-	struct _CONTROL_PACKET* next;
-}__attribute__((packed));
-typedef struct _CONTROL_PACKET CONTROL_PACKET,*PCONTROL_PACKET;
-
+	struct _CONTROL_PACKET *next;
+} __packed;
+typedef struct _CONTROL_PACKET CONTROL_PACKET, *PCONTROL_PACKET;
 
-struct link_request
-{
+struct link_request {
 	LEADER	Leader;
 	UCHAR	szData[4];
-}__attribute__((packed));
+} __packed;
 typedef struct link_request LINK_REQUEST, *PLINK_REQUEST;
 
-
-//classification extension is added
-typedef struct _ADD_CONNECTION
-{
-    ULONG 		SrcIpAddressCount;
-    ULONG 		SrcIpAddress[MAX_CONNECTIONS];
-    ULONG 		SrcIpMask[MAX_CONNECTIONS];
-
-    ULONG 		DestIpAddressCount;
-    ULONG 		DestIpAddress[MAX_CONNECTIONS];
-    ULONG 		DestIpMask[MAX_CONNECTIONS];
-
-    USHORT 		SrcPortBegin;
-    USHORT 		SrcPortEnd;
-
-    USHORT 		DestPortBegin;
-    USHORT 		DestPortEnd;
-
-    UCHAR 		SrcTOS;
-    UCHAR 		SrcProtocol;
-} ADD_CONNECTION,*PADD_CONNECTION;
-
-
-typedef struct _CLASSIFICATION_RULE
-{
-	UCHAR		ucIPSrcAddrLen;
-	UCHAR       ucIPSrcAddr[32];
-	UCHAR		ucIPDestAddrLen;
-	UCHAR       ucIPDestAddr[32];
-	UCHAR		ucSrcPortRangeLen;
-	UCHAR		ucSrcPortRange[4];
-	UCHAR		ucDestPortRangeLen;
-	UCHAR		ucDestPortRange[4];
-	USHORT		usVcid;
-} CLASSIFICATION_RULE,*PCLASSIFICATION_RULE;
-
-typedef struct _CLASSIFICATION_ONLY
-{
-    USHORT 		usVcid;
-    ULONG  		DestIpAddress;
-    ULONG  		DestIpMask;
-    USHORT 		usPortLo;
-    USHORT 		usPortHi;
-    BOOLEAN		bIpVersion;
-    UCHAR		ucDestinationAddress[16];
+/* classification extension is added */
+typedef struct _ADD_CONNECTION {
+	ULONG	SrcIpAddressCount;
+	ULONG	SrcIpAddress[MAX_CONNECTIONS];
+	ULONG	SrcIpMask[MAX_CONNECTIONS];
+
+	ULONG	DestIpAddressCount;
+	ULONG	DestIpAddress[MAX_CONNECTIONS];
+	ULONG	DestIpMask[MAX_CONNECTIONS];
+
+	USHORT	SrcPortBegin;
+	USHORT	SrcPortEnd;
+
+	USHORT	DestPortBegin;
+	USHORT	DestPortEnd;
+
+	UCHAR	SrcTOS;
+	UCHAR	SrcProtocol;
+} ADD_CONNECTION, *PADD_CONNECTION;
+
+typedef struct _CLASSIFICATION_RULE {
+	UCHAR	ucIPSrcAddrLen;
+	UCHAR	ucIPSrcAddr[32];
+	UCHAR	ucIPDestAddrLen;
+	UCHAR	ucIPDestAddr[32];
+	UCHAR	ucSrcPortRangeLen;
+	UCHAR	ucSrcPortRange[4];
+	UCHAR	ucDestPortRangeLen;
+	UCHAR	ucDestPortRange[4];
+	USHORT	usVcid;
+} CLASSIFICATION_RULE, *PCLASSIFICATION_RULE;
+
+typedef struct _CLASSIFICATION_ONLY {
+	USHORT	usVcid;
+	ULONG	DestIpAddress;
+	ULONG	DestIpMask;
+	USHORT	usPortLo;
+	USHORT	usPortHi;
+	BOOLEAN	bIpVersion;
+	UCHAR	ucDestinationAddress[16];
 } CLASSIFICATION_ONLY, *PCLASSIFICATION_ONLY;
 
-
 #define MAX_IP_RANGE_LENGTH 4
 #define MAX_PORT_RANGE 4
 #define MAX_PROTOCOL_LENGTH   32
 #define IPV6_ADDRESS_SIZEINBYTES 0x10
 
-typedef union _U_IP_ADDRESS
-{
-    struct
-	{
-		ULONG				ulIpv4Addr[MAX_IP_RANGE_LENGTH];//Source Ip Address Range
-		ULONG               ulIpv4Mask[MAX_IP_RANGE_LENGTH];//Source Ip Mask Address Range
+typedef union _U_IP_ADDRESS {
+	struct {
+		ULONG ulIpv4Addr[MAX_IP_RANGE_LENGTH]; /* Source Ip Address Range */
+		ULONG ulIpv4Mask[MAX_IP_RANGE_LENGTH]; /* Source Ip Mask Address Range */
 	};
-	struct
-	{
-		ULONG				ulIpv6Addr[MAX_IP_RANGE_LENGTH * 4];//Source Ip Address Range
-		ULONG               ulIpv6Mask[MAX_IP_RANGE_LENGTH * 4];//Source Ip Mask Address Range
-
+	struct {
+		ULONG ulIpv6Addr[MAX_IP_RANGE_LENGTH * 4]; /* Source Ip Address Range */
+		ULONG ulIpv6Mask[MAX_IP_RANGE_LENGTH * 4]; /* Source Ip Mask Address Range */
 	};
-	struct
-	{
-		UCHAR				ucIpv4Address[MAX_IP_RANGE_LENGTH * IP_LENGTH_OF_ADDRESS];
-		UCHAR				ucIpv4Mask[MAX_IP_RANGE_LENGTH * IP_LENGTH_OF_ADDRESS];
+	struct {
+		UCHAR ucIpv4Address[MAX_IP_RANGE_LENGTH * IP_LENGTH_OF_ADDRESS];
+		UCHAR ucIpv4Mask[MAX_IP_RANGE_LENGTH * IP_LENGTH_OF_ADDRESS];
 	};
-	struct
-	{
-		UCHAR				ucIpv6Address[MAX_IP_RANGE_LENGTH * IPV6_ADDRESS_SIZEINBYTES];
-		UCHAR				ucIpv6Mask[MAX_IP_RANGE_LENGTH * IPV6_ADDRESS_SIZEINBYTES];
+	struct {
+		UCHAR ucIpv6Address[MAX_IP_RANGE_LENGTH * IPV6_ADDRESS_SIZEINBYTES];
+		UCHAR ucIpv6Mask[MAX_IP_RANGE_LENGTH * IPV6_ADDRESS_SIZEINBYTES];
 	};
-}U_IP_ADDRESS;
+} U_IP_ADDRESS;
 struct _packet_info;
 
-typedef struct _S_HDR_SUPRESSION_CONTEXTINFO
-{
+typedef struct _S_HDR_SUPRESSION_CONTEXTINFO {
+	UCHAR ucaHdrSupressionInBuf[MAX_PHS_LENGTHS]; /* Intermediate buffer to accumulate pkt Header for PHS */
+	UCHAR ucaHdrSupressionOutBuf[MAX_PHS_LENGTHS + PHSI_LEN]; /* Intermediate buffer containing pkt Header after PHS */
+} S_HDR_SUPRESSION_CONTEXTINFO;
+
+typedef struct _S_CLASSIFIER_RULE {
+	ULONG		ulSFID;
+	UCHAR		ucReserved[2];
+	B_UINT16	uiClassifierRuleIndex;
+	BOOLEAN		bUsed;
+	USHORT		usVCID_Value;
+	B_UINT8		u8ClassifierRulePriority; /* This field detemines the Classifier Priority */
+	U_IP_ADDRESS	stSrcIpAddress;
+	UCHAR		ucIPSourceAddressLength; /* Ip Source Address Length */
 
-	UCHAR      ucaHdrSupressionInBuf[MAX_PHS_LENGTHS]; //Intermediate buffer to accumulate pkt Header for PHS
-	UCHAR      ucaHdrSupressionOutBuf[MAX_PHS_LENGTHS + PHSI_LEN]; //Intermediate buffer containing pkt Header after PHS
+	U_IP_ADDRESS	stDestIpAddress;
+	UCHAR		ucIPDestinationAddressLength; /* Ip Destination Address Length */
+	UCHAR		ucIPTypeOfServiceLength; /* Type of service Length */
+	UCHAR		ucTosLow; /* Tos Low */
+	UCHAR		ucTosHigh; /* Tos High */
+	UCHAR		ucTosMask; /* Tos Mask */
 
-}S_HDR_SUPRESSION_CONTEXTINFO;
+	UCHAR		ucProtocolLength; /* protocol Length */
+	UCHAR		ucProtocol[MAX_PROTOCOL_LENGTH]; /* protocol Length */
+	USHORT		usSrcPortRangeLo[MAX_PORT_RANGE];
+	USHORT		usSrcPortRangeHi[MAX_PORT_RANGE];
+	UCHAR		ucSrcPortRangeLength;
 
+	USHORT		usDestPortRangeLo[MAX_PORT_RANGE];
+	USHORT		usDestPortRangeHi[MAX_PORT_RANGE];
+	UCHAR		ucDestPortRangeLength;
 
-typedef struct _S_CLASSIFIER_RULE
-{
-	ULONG			ulSFID;
-	UCHAR           ucReserved[2];
-	B_UINT16        uiClassifierRuleIndex;
-	BOOLEAN			bUsed;
-	USHORT			usVCID_Value;
-	B_UINT8         u8ClassifierRulePriority; //This field detemines the Classifier Priority
-	U_IP_ADDRESS	stSrcIpAddress;
-	UCHAR           ucIPSourceAddressLength;//Ip Source Address Length
-
-	U_IP_ADDRESS    stDestIpAddress;
-    UCHAR           ucIPDestinationAddressLength;//Ip Destination Address Length
-    UCHAR           ucIPTypeOfServiceLength;//Type of service Length
-    UCHAR           ucTosLow;//Tos Low
-    UCHAR           ucTosHigh;//Tos High
-	UCHAR           ucTosMask;//Tos Mask
-
-    UCHAR           ucProtocolLength;//protocol Length
-    UCHAR           ucProtocol[MAX_PROTOCOL_LENGTH];//protocol Length
-    USHORT			usSrcPortRangeLo[MAX_PORT_RANGE];
-	USHORT			usSrcPortRangeHi[MAX_PORT_RANGE];
-    UCHAR           ucSrcPortRangeLength;
-
-    USHORT			usDestPortRangeLo[MAX_PORT_RANGE];
-	USHORT			usDestPortRangeHi[MAX_PORT_RANGE];
-    UCHAR           ucDestPortRangeLength;
-
-	BOOLEAN			bProtocolValid;
-	BOOLEAN			bTOSValid;
-	BOOLEAN			bDestIpValid;
-	BOOLEAN			bSrcIpValid;
-
-	//For IPv6 Addressing
-	UCHAR			ucDirection;
-	BOOLEAN         bIpv6Protocol;
-	UINT32          u32PHSRuleID;
-	S_PHS_RULE 	    sPhsRule;
-	UCHAR			u8AssociatedPHSI;
-
-	//Classification fields for ETH CS
+	BOOLEAN		bProtocolValid;
+	BOOLEAN		bTOSValid;
+	BOOLEAN		bDestIpValid;
+	BOOLEAN		bSrcIpValid;
+
+	/* For IPv6 Addressing */
+	UCHAR		ucDirection;
+	BOOLEAN		bIpv6Protocol;
+	UINT32		u32PHSRuleID;
+	S_PHS_RULE	sPhsRule;
+	UCHAR		u8AssociatedPHSI;
+
+	/* Classification fields for ETH CS */
 	UCHAR		ucEthCSSrcMACLen;
 	UCHAR		au8EThCSSrcMAC[MAC_ADDRESS_SIZE];
 	UCHAR		au8EThCSSrcMACMask[MAC_ADDRESS_SIZE];
@@ -180,71 +157,67 @@ typedef struct _S_CLASSIFIER_RULE
 	UCHAR		usUserPriority[2];
 	USHORT		usVLANID;
 	USHORT		usValidityBitMap;
-}S_CLASSIFIER_RULE;
-//typedef struct _S_CLASSIFIER_RULE S_CLASSIFIER_RULE;
-
-typedef struct _S_FRAGMENTED_PACKET_INFO
-{
-	BOOLEAN				bUsed;
-	ULONG		        ulSrcIpAddress;
-	USHORT 				usIpIdentification;
-	S_CLASSIFIER_RULE 	*pstMatchedClassifierEntry;
-	BOOLEAN				bOutOfOrderFragment;
-}S_FRAGMENTED_PACKET_INFO,*PS_FRAGMENTED_PACKET_INFO;
-
-struct _packet_info
-{
-	//classification extension Rule
-   	ULONG			ulSFID;
-   	USHORT			usVCID_Value;
-	UINT			uiThreshold;
-	// This field determines the priority of the SF Queues
-	B_UINT8     	u8TrafficPriority;
-
-	BOOLEAN			bValid;
-   	BOOLEAN     	bActive;
-	BOOLEAN			bActivateRequestSent;
-
-	B_UINT8			u8QueueType;//BE or rtPS
-
-	UINT			uiMaxBucketSize;//maximum size of the bucket for the queue
-	UINT			uiCurrentQueueDepthOnTarget;
-	UINT			uiCurrentBytesOnHost;
-	UINT			uiCurrentPacketsOnHost;
-	UINT			uiDroppedCountBytes;
-	UINT			uiDroppedCountPackets;
-	UINT			uiSentBytes;
-	UINT			uiSentPackets;
-	UINT			uiCurrentDrainRate;
-	UINT			uiThisPeriodSentBytes;
+} S_CLASSIFIER_RULE;
+/* typedef struct _S_CLASSIFIER_RULE S_CLASSIFIER_RULE; */
+
+typedef struct _S_FRAGMENTED_PACKET_INFO {
+	BOOLEAN			bUsed;
+	ULONG			ulSrcIpAddress;
+	USHORT			usIpIdentification;
+	S_CLASSIFIER_RULE	*pstMatchedClassifierEntry;
+	BOOLEAN			bOutOfOrderFragment;
+} S_FRAGMENTED_PACKET_INFO, *PS_FRAGMENTED_PACKET_INFO;
+
+struct _packet_info {
+	/* classification extension Rule */
+	ULONG		ulSFID;
+	USHORT		usVCID_Value;
+	UINT		uiThreshold;
+	/* This field determines the priority of the SF Queues */
+	B_UINT8		u8TrafficPriority;
+
+	BOOLEAN		bValid;
+	BOOLEAN		bActive;
+	BOOLEAN		bActivateRequestSent;
+
+	B_UINT8		u8QueueType; /* BE or rtPS */
+
+	UINT		uiMaxBucketSize; /* maximum size of the bucket for the queue */
+	UINT		uiCurrentQueueDepthOnTarget;
+	UINT		uiCurrentBytesOnHost;
+	UINT		uiCurrentPacketsOnHost;
+	UINT		uiDroppedCountBytes;
+	UINT		uiDroppedCountPackets;
+	UINT		uiSentBytes;
+	UINT		uiSentPackets;
+	UINT		uiCurrentDrainRate;
+	UINT		uiThisPeriodSentBytes;
 	LARGE_INTEGER	liDrainCalculated;
-	UINT			uiCurrentTokenCount;
-	LARGE_INTEGER 	liLastUpdateTokenAt;
-	UINT			uiMaxAllowedRate;
-	UINT			NumOfPacketsSent;
-	UCHAR			ucDirection;
-	USHORT			usCID;
+	UINT		uiCurrentTokenCount;
+	LARGE_INTEGER	liLastUpdateTokenAt;
+	UINT		uiMaxAllowedRate;
+	UINT		NumOfPacketsSent;
+	UCHAR		ucDirection;
+	USHORT		usCID;
 	S_MIBS_EXTSERVICEFLOW_PARAMETERS	stMibsExtServiceFlowTable;
-	UINT			uiCurrentRxRate;
-	UINT			uiThisPeriodRxBytes;
-	UINT			uiTotalRxBytes;
-	UINT			uiTotalTxBytes;
-	UINT			uiPendedLast;
-	UCHAR			ucIpVersion;
-
-	union
-	{
-		struct
-		{
-			struct sk_buff*	   FirstTxQueue;
-			struct sk_buff*	   LastTxQueue;
+	UINT		uiCurrentRxRate;
+	UINT		uiThisPeriodRxBytes;
+	UINT		uiTotalRxBytes;
+	UINT		uiTotalTxBytes;
+	UINT		uiPendedLast;
+	UCHAR		ucIpVersion;
+
+	union {
+		struct {
+			struct sk_buff *FirstTxQueue;
+			struct sk_buff *LastTxQueue;
 		};
-		struct
-		{
-			struct sk_buff*	   ControlHead;
-			struct sk_buff*	   ControlTail;
+		struct {
+			struct sk_buff *ControlHead;
+			struct sk_buff *ControlTail;
 		};
 	};
+
 	BOOLEAN		bProtocolValid;
 	BOOLEAN		bTOSValid;
 	BOOLEAN		bDestIpValid;
@@ -255,226 +228,209 @@ struct _packet_info
 	BOOLEAN		bAuthorizedSet;
 	BOOLEAN		bClassifierPriority;
 	UCHAR		ucServiceClassName[MAX_CLASS_NAME_LENGTH];
-	BOOLEAN     bHeaderSuppressionEnabled;
+	BOOLEAN		bHeaderSuppressionEnabled;
 	spinlock_t	SFQueueLock;
-	void 		*pstSFIndication;
+	void		*pstSFIndication;
 	struct timeval	stLastUpdateTokenAt;
-	atomic_t 	uiPerSFTxResourceCount;
+	atomic_t	uiPerSFTxResourceCount;
 	UINT		uiMaxLatency;
-	UCHAR 	bIPCSSupport;
-	UCHAR 	bEthCSSupport;
+	UCHAR		bIPCSSupport;
+	UCHAR		bEthCSSupport;
 };
 typedef struct _packet_info PacketInfo;
 
-
-typedef struct _PER_TARANG_DATA
-{
-    struct _PER_TARANG_DATA * next;
-    struct _MINI_ADAPTER * Adapter;
-    struct sk_buff*     RxAppControlHead;
-    struct sk_buff*     RxAppControlTail;
-    volatile INT        AppCtrlQueueLen;
-    BOOLEAN             MacTracingEnabled;
-	BOOLEAN				bApplicationToExit;
-	S_MIBS_DROPPED_APP_CNTRL_MESSAGES stDroppedAppCntrlMsgs;
-	ULONG 				RxCntrlMsgBitMask;
+typedef struct _PER_TARANG_DATA {
+	struct _PER_TARANG_DATA	*next;
+	struct _MINI_ADAPTER	*Adapter;
+	struct sk_buff		*RxAppControlHead;
+	struct sk_buff		*RxAppControlTail;
+	int			AppCtrlQueueLen;
+	BOOLEAN			MacTracingEnabled;
+	BOOLEAN			bApplicationToExit;
+	S_MIBS_DROPPED_APP_CNTRL_MESSAGES	stDroppedAppCntrlMsgs;
+	ULONG			RxCntrlMsgBitMask;
 } PER_TARANG_DATA, *PPER_TARANG_DATA;
 
-
 #ifdef REL_4_1
-typedef struct _TARGET_PARAMS
-{
-      B_UINT32 m_u32CfgVersion;
-
-      // Scanning Related Params
-      B_UINT32 m_u32CenterFrequency;
-      B_UINT32 m_u32BandAScan;
-      B_UINT32 m_u32BandBScan;
-      B_UINT32 m_u32BandCScan;
-
-      // QoS Params
-      B_UINT32 m_u32minGrantsize;	// size of minimum grant is 0 or 6
-      B_UINT32 m_u32PHSEnable;
-
-      // HO Params
-      B_UINT32 m_u32HoEnable;
-      B_UINT32 m_u32HoReserved1;
-      B_UINT32 m_u32HoReserved2;
-
-	// Power Control Params
-      B_UINT32 m_u32MimoEnable;
-      B_UINT32 m_u32SecurityEnable;
+typedef struct _TARGET_PARAMS {
+	B_UINT32 m_u32CfgVersion;
+
+	/* Scanning Related Params */
+	B_UINT32 m_u32CenterFrequency;
+	B_UINT32 m_u32BandAScan;
+	B_UINT32 m_u32BandBScan;
+	B_UINT32 m_u32BandCScan;
+
+	/* QoS Params */
+	B_UINT32 m_u32minGrantsize;	/* size of minimum grant is 0 or 6 */
+	B_UINT32 m_u32PHSEnable;
+
+	/* HO Params */
+	B_UINT32 m_u32HoEnable;
+	B_UINT32 m_u32HoReserved1;
+	B_UINT32 m_u32HoReserved2;
+
+	/* Power Control Params */
+	B_UINT32 m_u32MimoEnable;
+	B_UINT32 m_u32SecurityEnable;
 	/*
-     * bit 1: 1 Idlemode enable;
-     * bit 2: 1 Sleepmode Enable
-     */
-      B_UINT32 m_u32PowerSavingModesEnable;
-	  /* PowerSaving Mode Options:
-	     bit 0 = 1: CPE mode - to keep pcmcia if alive;
-	     bit 1 = 1: CINR reporing in Idlemode Msg
-	     bit 2 = 1: Default PSC Enable in sleepmode*/
-      B_UINT32 m_u32PowerSavingModeOptions;
-
-      B_UINT32 m_u32ArqEnable;
-
-      // From Version #3, the HARQ section renamed as general
-      B_UINT32 m_u32HarqEnable;
-       // EEPROM Param Location
-       B_UINT32  m_u32EEPROMFlag;
-       /* BINARY TYPE - 4th MSByte:
-        * Interface Type -  3rd MSByte:
-        * Vendor Type - 2nd MSByte
-        */
-       // Unused - LSByte
-      B_UINT32   m_u32Customize;
-      B_UINT32   m_u32ConfigBW;  /* In Hz */
-      B_UINT32   m_u32ShutDownTimer;
-
-
-      B_UINT32  m_u32RadioParameter;
-      B_UINT32  m_u32PhyParameter1;
-      B_UINT32  m_u32PhyParameter2;
-      B_UINT32  m_u32PhyParameter3;
+	 * bit 1: 1 Idlemode enable;
+	 * bit 2: 1 Sleepmode Enable
+	 */
+	B_UINT32 m_u32PowerSavingModesEnable;
+	/* PowerSaving Mode Options:
+	 * bit 0 = 1: CPE mode - to keep pcmcia if alive;
+	 * bit 1 = 1: CINR reporing in Idlemode Msg
+	 * bit 2 = 1: Default PSC Enable in sleepmode
+	 */
+	B_UINT32 m_u32PowerSavingModeOptions;
+
+	B_UINT32 m_u32ArqEnable;
+
+	/* From Version #3, the HARQ section renamed as general */
+	B_UINT32 m_u32HarqEnable;
+	/* EEPROM Param Location */
+	B_UINT32 m_u32EEPROMFlag;
+	/* BINARY TYPE - 4th MSByte:
+	 * Interface Type -  3rd MSByte:
+	 * Vendor Type - 2nd MSByte
+	 */
+	/* Unused - LSByte */
+	B_UINT32 m_u32Customize;
+	B_UINT32 m_u32ConfigBW;  /* In Hz */
+	B_UINT32 m_u32ShutDownTimer;
+	B_UINT32 m_u32RadioParameter;
+	B_UINT32 m_u32PhyParameter1;
+	B_UINT32 m_u32PhyParameter2;
+	B_UINT32 m_u32PhyParameter3;
 
 	/* in eval mode only;
-     * lower 16bits = basic cid for testing;
-     * then bit 16 is test cqich,
-     * bit 17  test init rang;
-     * bit 18 test periodic rang
-     * bit 19 is test harq ack/nack
-     */
-    B_UINT32	  m_u32TestOptions;
-
+	 * lower 16bits = basic cid for testing;
+	 * then bit 16 is test cqich,
+	 * bit 17  test init rang;
+	 * bit 18 test periodic rang
+	 * bit 19 is test harq ack/nack
+	 */
+	B_UINT32 m_u32TestOptions;
 	B_UINT32 m_u32MaxMACDataperDLFrame;
 	B_UINT32 m_u32MaxMACDataperULFrame;
-
 	B_UINT32 m_u32Corr2MacFlags;
 
-    //adding driver params.
-    B_UINT32 HostDrvrConfig1;
-    B_UINT32 HostDrvrConfig2;
-    B_UINT32 HostDrvrConfig3;
-    B_UINT32 HostDrvrConfig4;
-    B_UINT32 HostDrvrConfig5;
-    B_UINT32 HostDrvrConfig6;
-    B_UINT32 m_u32SegmentedPUSCenable;
-
-	//	BAMC enable - but 4.x does not support this feature
-	//	This is added just to sync 4.x and 5.x CFGs
+	/* adding driver params. */
+	B_UINT32 HostDrvrConfig1;
+	B_UINT32 HostDrvrConfig2;
+	B_UINT32 HostDrvrConfig3;
+	B_UINT32 HostDrvrConfig4;
+	B_UINT32 HostDrvrConfig5;
+	B_UINT32 HostDrvrConfig6;
+	B_UINT32 m_u32SegmentedPUSCenable;
+
+	/* BAMC enable - but 4.x does not support this feature
+	 * This is added just to sync 4.x and 5.x CFGs
+	 */
 	B_UINT32 m_u32BandAMCEnable;
 } STARGETPARAMS, *PSTARGETPARAMS;
 #endif
 
-typedef struct _STTARGETDSXBUFFER
-{
-    ULONG ulTargetDsxBuffer;
-    B_UINT16 tid;
-    BOOLEAN valid;
-}STTARGETDSXBUFFER, *PSTTARGETDSXBUFFER;
+typedef struct _STTARGETDSXBUFFER {
+	ULONG		ulTargetDsxBuffer;
+	B_UINT16	tid;
+	BOOLEAN		valid;
+} STTARGETDSXBUFFER, *PSTTARGETDSXBUFFER;
 
-typedef INT (*FP_FLASH_WRITE)(struct _MINI_ADAPTER*,UINT,PVOID);
+typedef int (*FP_FLASH_WRITE)(struct _MINI_ADAPTER *, UINT, PVOID);
 
-typedef INT (*FP_FLASH_WRITE_STATUS)(struct _MINI_ADAPTER*,UINT,PVOID);
+typedef int (*FP_FLASH_WRITE_STATUS)(struct _MINI_ADAPTER *, UINT, PVOID);
 
-/**
-Driver adapter data structure
-*/
-struct _MINI_ADAPTER
-{
-	struct _MINI_ADAPTER *next;
+/*
+ * Driver adapter data structure
+ */
+struct _MINI_ADAPTER {
+	struct _MINI_ADAPTER	*next;
 	struct net_device	*dev;
 	u32			msg_enable;
-
-	CHAR                *caDsxReqResp;
+	CHAR			*caDsxReqResp;
 	atomic_t		ApplicationRunning;
-	volatile INT		CtrlQueueLen;
-	atomic_t            	AppCtrlQueueLen;
-	BOOLEAN             	AppCtrlQueueOverFlow;
+	BOOLEAN			AppCtrlQueueOverFlow;
 	atomic_t		CurrentApplicationCount;
-	atomic_t 		RegisteredApplicationCount;
-	BOOLEAN		  	LinkUpStatus;
-	BOOLEAN		    	TimerActive;
+	atomic_t		RegisteredApplicationCount;
+	BOOLEAN			LinkUpStatus;
+	BOOLEAN			TimerActive;
 	u32			StatisticsPointer;
 	struct sk_buff		*RxControlHead;
 	struct sk_buff		*RxControlTail;
-
 	struct semaphore	RxAppControlQueuelock;
 	struct semaphore	fw_download_sema;
-
-	PPER_TARANG_DATA    pTarangs;
-	spinlock_t			control_queue_lock;
+	PPER_TARANG_DATA	pTarangs;
+	spinlock_t		control_queue_lock;
 	wait_queue_head_t	process_read_wait_queue;
 
-	// the pointer to the first packet we have queued in send
-	// deserialized miniport support variables
-	atomic_t		    TotalPacketCount;
-	atomic_t		    TxPktAvail;
-
-	// this to keep track of the Tx and Rx MailBox Registers.
-	atomic_t		    CurrNumFreeTxDesc;
-	// to keep track the no of byte received
-	USHORT				PrevNumRecvDescs;
-	USHORT				CurrNumRecvDescs;
-	UINT				u32TotalDSD;
-	PacketInfo		    PackInfo[NO_OF_QUEUES];
+	/* the pointer to the first packet we have queued in send
+	 * deserialized miniport support variables
+	 */
+	atomic_t		TotalPacketCount;
+	atomic_t		TxPktAvail;
+
+	/* this to keep track of the Tx and Rx MailBox Registers. */
+	atomic_t		CurrNumFreeTxDesc;
+	/* to keep track the no of byte received */
+	USHORT			PrevNumRecvDescs;
+	USHORT			CurrNumRecvDescs;
+	UINT			u32TotalDSD;
+	PacketInfo		PackInfo[NO_OF_QUEUES];
 	S_CLASSIFIER_RULE	astClassifierTable[MAX_CLASSIFIERS];
-	BOOLEAN			    TransferMode;
+	BOOLEAN			TransferMode;
 
 	/*************** qos ******************/
-	BOOLEAN			    bETHCSEnabled;
-
-	ULONG			    BEBucketSize;
-	ULONG			    rtPSBucketSize;
-	UCHAR			    LinkStatus;
-	BOOLEAN			    AutoLinkUp;
-	BOOLEAN			    AutoSyncup;
-
-	int				major;
-	int				minor;
-	wait_queue_head_t 	tx_packet_wait_queue;
-	wait_queue_head_t 	process_rx_cntrlpkt;
-	atomic_t			process_waiting;
-	BOOLEAN 			fw_download_done;
-
-	char 				*txctlpacket[MAX_CNTRL_PKTS];
-	atomic_t			cntrlpktCnt ;
-	atomic_t			index_app_read_cntrlpkt;
-	atomic_t			index_wr_txcntrlpkt;
-	atomic_t			index_rd_txcntrlpkt;
-	UINT				index_datpkt;
-	struct semaphore 	rdmwrmsync;
+	BOOLEAN			bETHCSEnabled;
+	ULONG			BEBucketSize;
+	ULONG			rtPSBucketSize;
+	UCHAR			LinkStatus;
+	BOOLEAN			AutoLinkUp;
+	BOOLEAN			AutoSyncup;
+
+	int			major;
+	int			minor;
+	wait_queue_head_t	tx_packet_wait_queue;
+	wait_queue_head_t	process_rx_cntrlpkt;
+	atomic_t		process_waiting;
+	BOOLEAN			fw_download_done;
+
+	char			*txctlpacket[MAX_CNTRL_PKTS];
+	atomic_t		cntrlpktCnt ;
+	atomic_t		index_app_read_cntrlpkt;
+	atomic_t		index_wr_txcntrlpkt;
+	atomic_t		index_rd_txcntrlpkt;
+	UINT			index_datpkt;
+	struct semaphore	rdmwrmsync;
 
 	STTARGETDSXBUFFER	astTargetDsxBuffer[MAX_TARGET_DSX_BUFFERS];
 	ULONG			ulFreeTargetBufferCnt;
-	ULONG              	ulCurrentTargetBuffer;
-	ULONG              	ulTotalTargetBuffersAvailable;
-
-	unsigned long 		chip_id;
-
-	wait_queue_head_t 	lowpower_mode_wait_queue;
-
+	ULONG			ulCurrentTargetBuffer;
+	ULONG			ulTotalTargetBuffersAvailable;
+	unsigned long		chip_id;
+	wait_queue_head_t	lowpower_mode_wait_queue;
 	BOOLEAN			bFlashBoot;
 	BOOLEAN			bBinDownloaded;
 	BOOLEAN			bCfgDownloaded;
 	BOOLEAN			bSyncUpRequestSent;
 	USHORT			usBestEffortQueueIndex;
-
-	wait_queue_head_t 	ioctl_fw_dnld_wait_queue;
-	BOOLEAN				waiting_to_fw_download_done;
-	pid_t				fw_download_process_pid;
+	wait_queue_head_t	ioctl_fw_dnld_wait_queue;
+	BOOLEAN			waiting_to_fw_download_done;
+	pid_t			fw_download_process_pid;
 	PSTARGETPARAMS		pstargetparams;
-	BOOLEAN				device_removed;
-	BOOLEAN				DeviceAccess;
-	BOOLEAN				bIsAutoCorrectEnabled;
-	BOOLEAN				bDDRInitDone;
-	INT				DDRSetting;
-	ULONG				ulPowerSaveMode;
-	spinlock_t			txtransmitlock;
-	B_UINT8				txtransmit_running;
+	BOOLEAN			device_removed;
+	BOOLEAN			DeviceAccess;
+	BOOLEAN			bIsAutoCorrectEnabled;
+	BOOLEAN			bDDRInitDone;
+	int			DDRSetting;
+	ULONG			ulPowerSaveMode;
+	spinlock_t		txtransmitlock;
+	B_UINT8			txtransmit_running;
 	/* Thread for control packet handling */
-	struct task_struct 	*control_packet_handler;
+	struct task_struct	*control_packet_handler;
 	/* thread for transmitting packets. */
-	struct task_struct 	*transmit_packet_thread;
+	struct task_struct	*transmit_packet_thread;
 
 	/* LED Related Structures */
 	LED_INFO_STRUCT		LEDInfo;
@@ -482,39 +438,38 @@ struct _MINI_ADAPTER
 	/* Driver State for LED Blinking */
 	LedEventInfo_t		DriverState;
 	/* Interface Specific */
-	PVOID				pvInterfaceAdapter;
-	int (*bcm_file_download)( PVOID,
-                        struct file *,
-                        unsigned int);
-	int (*bcm_file_readback_from_chip)( PVOID,
-                        struct file *,
-                        unsigned int);
-	INT (*interface_rdm)(PVOID,
-			UINT ,
-			PVOID ,
-			INT);
-	INT (*interface_wrm)(PVOID,
-			UINT ,
-			PVOID ,
-			INT);
+	PVOID			pvInterfaceAdapter;
+	int (*bcm_file_download)(PVOID,
+				struct file *,
+				unsigned int);
+	int (*bcm_file_readback_from_chip)(PVOID,
+					struct file *,
+					unsigned int);
+	int (*interface_rdm)(PVOID,
+			UINT,
+			PVOID,
+			int);
+	int (*interface_wrm)(PVOID,
+			UINT,
+			PVOID,
+			int);
 	int (*interface_transmit)(PVOID, PVOID , UINT);
 	BOOLEAN			IdleMode;
 	BOOLEAN			bDregRequestSentInIdleMode;
 	BOOLEAN			bTriedToWakeUpFromlowPowerMode;
 	BOOLEAN			bShutStatus;
 	BOOLEAN			bWakeUpDevice;
-	unsigned int	usIdleModePattern;
-	//BOOLEAN			bTriedToWakeUpFromShutdown;
+	unsigned int		usIdleModePattern;
+	/* BOOLEAN			bTriedToWakeUpFromShutdown; */
 	BOOLEAN			bLinkDownRequested;
-
-	int 			downloadDDR;
-	PHS_DEVICE_EXTENSION stBCMPhsContext;
-	S_HDR_SUPRESSION_CONTEXTINFO	stPhsTxContextInfo;
+	int			downloadDDR;
+	PHS_DEVICE_EXTENSION	stBCMPhsContext;
+	S_HDR_SUPRESSION_CONTEXTINFO stPhsTxContextInfo;
 	uint8_t			ucaPHSPktRestoreBuf[2048];
 	uint8_t			bPHSEnabled;
 	BOOLEAN			AutoFirmDld;
-	BOOLEAN         bMipsConfig;
-	BOOLEAN         bDPLLConfig;
+	BOOLEAN			bMipsConfig;
+	BOOLEAN			bDPLLConfig;
 	UINT32			aTxPktSizeHist[MIBS_MAX_HIST_ENTRIES];
 	UINT32			aRxPktSizeHist[MIBS_MAX_HIST_ENTRIES];
 	S_FRAGMENTED_PACKET_INFO astFragmentedPktClassifierTable[MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES];
@@ -527,108 +482,101 @@ struct _MINI_ADAPTER
 	BOOLEAN			bStatusWrite;
 	UINT			uiNVMDSDSize;
 	UINT			uiVendorExtnFlag;
-	 //it will always represent chosen DSD at any point of time.
-	 // Generally it is Active DSD but in case of NVM RD/WR it might be different.
+	/* it will always represent chosen DSD at any point of time.
+	 * Generally it is Active DSD but in case of NVM RD/WR it might be different.
+	 */
 	UINT			ulFlashCalStart;
-	ULONG                   ulFlashControlSectionStart;
-	ULONG                   ulFlashWriteSize;
-	ULONG                   ulFlashID;
-	FP_FLASH_WRITE          fpFlashWrite;
-	FP_FLASH_WRITE_STATUS   fpFlashWriteWithStatusCheck;
-
+	ULONG			ulFlashControlSectionStart;
+	ULONG			ulFlashWriteSize;
+	ULONG			ulFlashID;
+	FP_FLASH_WRITE		fpFlashWrite;
+	FP_FLASH_WRITE_STATUS	fpFlashWriteWithStatusCheck;
 
 	struct semaphore	NVMRdmWrmLock;
+	struct device		*pstCreatedClassDevice;
 
-	struct device *pstCreatedClassDevice;
-
-//	BOOLEAN				InterfaceUpStatus;
-	PFLASH2X_CS_INFO psFlash2xCSInfo;
-	PFLASH_CS_INFO psFlashCSInfo ;
+	/*	BOOLEAN				InterfaceUpStatus; */
+	PFLASH2X_CS_INFO	psFlash2xCSInfo;
+	PFLASH_CS_INFO		psFlashCSInfo;
 	PFLASH2X_VENDORSPECIFIC_INFO psFlash2xVendorInfo;
-	UINT uiFlashBaseAdd; //Flash start address
-	UINT uiActiveISOOffset; //Active ISO offset chosen before f/w download
-	FLASH2X_SECTION_VAL eActiveISO; //Active ISO section val
-	FLASH2X_SECTION_VAL eActiveDSD;	//Active DSD val chosen before f/w download
-	UINT uiActiveDSDOffsetAtFwDld;  //For accessing Active DSD chosen before f/w download
-	UINT uiFlashLayoutMajorVersion ;
-	UINT uiFlashLayoutMinorVersion;
-	BOOLEAN bAllDSDWriteAllow ;
-	BOOLEAN bSigCorrupted ;
-	//this should be set who so ever want to change the Headers. after Wrtie it should be reset immediately.
-	BOOLEAN bHeaderChangeAllowed ;
-	INT SelectedChip ;
-	BOOLEAN bEndPointHalted;
-	//while bFlashRawRead will be true, Driver  ignore map lay out and consider flash as of without any map.
-	BOOLEAN bFlashRawRead;
-	BOOLEAN			bPreparingForLowPowerMode ;
-	BOOLEAN bDoSuspend ;
-	UINT syscfgBefFwDld ;
-	BOOLEAN StopAllXaction ;
-	UINT32	liTimeSinceLastNetEntry; //Used to Support extended CAPI requirements from
+	UINT			uiFlashBaseAdd; /* Flash start address */
+	UINT			uiActiveISOOffset; /* Active ISO offset chosen before f/w download */
+	FLASH2X_SECTION_VAL	eActiveISO; /* Active ISO section val */
+	FLASH2X_SECTION_VAL	eActiveDSD;	/* Active DSD val chosen before f/w download */
+	UINT			uiActiveDSDOffsetAtFwDld;  /* For accessing Active DSD chosen before f/w download */
+	UINT			uiFlashLayoutMajorVersion;
+	UINT			uiFlashLayoutMinorVersion;
+	BOOLEAN			bAllDSDWriteAllow;
+	BOOLEAN			bSigCorrupted;
+	/* this should be set who so ever want to change the Headers. after Wrtie it should be reset immediately. */
+	BOOLEAN			bHeaderChangeAllowed;
+	int			SelectedChip;
+	BOOLEAN			bEndPointHalted;
+	/* while bFlashRawRead will be true, Driver  ignore map lay out and consider flash as of without any map. */
+	BOOLEAN			bFlashRawRead;
+	BOOLEAN			bPreparingForLowPowerMode;
+	BOOLEAN			bDoSuspend;
+	UINT			syscfgBefFwDld;
+	BOOLEAN			StopAllXaction;
+	UINT32			liTimeSinceLastNetEntry; /* Used to Support extended CAPI requirements from */
 	struct semaphore	LowPowerModeSync;
-	ULONG	liDrainCalculated;
-	UINT gpioBitMap;
-
-    S_BCM_DEBUG_STATE stDebugState;
-
+	ULONG			liDrainCalculated;
+	UINT			gpioBitMap;
+	S_BCM_DEBUG_STATE	stDebugState;
 };
 typedef struct _MINI_ADAPTER MINI_ADAPTER, *PMINI_ADAPTER;
 
-#define GET_BCM_ADAPTER(net_dev)	netdev_priv(net_dev)
+#define GET_BCM_ADAPTER(net_dev) netdev_priv(net_dev)
 
 struct _ETH_HEADER_STRUC {
-    UCHAR       au8DestinationAddress[6];
-    UCHAR       au8SourceAddress[6];
-    USHORT      u16Etype;
-}__attribute__((packed));
+	UCHAR	au8DestinationAddress[6];
+	UCHAR	au8SourceAddress[6];
+	USHORT	u16Etype;
+} __packed;
 typedef struct _ETH_HEADER_STRUC ETH_HEADER_STRUC, *PETH_HEADER_STRUC;
 
+typedef struct FirmwareInfo {
+	void	__user *pvMappedFirmwareAddress;
+	ULONG	u32FirmwareLength;
+	ULONG	u32StartingAddress;
+} __packed FIRMWARE_INFO, *PFIRMWARE_INFO;
 
-typedef struct FirmwareInfo
-{
-	void __user *	pvMappedFirmwareAddress;
-	ULONG		u32FirmwareLength;
-	ULONG		u32StartingAddress;
-}__attribute__((packed)) FIRMWARE_INFO, *PFIRMWARE_INFO;
-
-// holds the value of net_device structure..
+/* holds the value of net_device structure.. */
 extern struct net_device *gblpnetdev;
-typedef struct _cntl_pkt{
-	PMINI_ADAPTER 	Adapter;
-	PLEADER 		PLeader;
-}cntl_pkt;
+typedef struct _cntl_pkt {
+	PMINI_ADAPTER	Adapter;
+	PLEADER		PLeader;
+} cntl_pkt;
 typedef LINK_REQUEST CONTROL_MESSAGE;
 
-typedef struct _DDR_SETTING
-{
+typedef struct _DDR_SETTING {
 	UINT ulRegAddress;
 	UINT ulRegValue;
-}DDR_SETTING, *PDDR_SETTING;
+} DDR_SETTING, *PDDR_SETTING;
 typedef DDR_SETTING DDR_SET_NODE, *PDDR_SET_NODE;
-INT
-InitAdapter(PMINI_ADAPTER psAdapter);
-
-// =====================================================================
-// Beceem vendor request codes for EP0
-// =====================================================================
+int InitAdapter(PMINI_ADAPTER psAdapter);
 
-#define BCM_REQUEST_READ  0x2
-#define BCM_REQUEST_WRITE 0x1
-#define EP2_MPS_REG  0x0F0110A0
-#define EP2_MPS 	 0x40
+/* =====================================================================
+ * Beceem vendor request codes for EP0
+ * =====================================================================
+ */
 
-#define EP2_CFG_REG  0x0F0110A8
-#define EP2_CFG_INT  0x27
-#define EP2_CFG_BULK 0x25
+#define BCM_REQUEST_READ	0x2
+#define BCM_REQUEST_WRITE	0x1
+#define EP2_MPS_REG		0x0F0110A0
+#define EP2_MPS			0x40
 
-#define EP4_MPS_REG  0x0F0110F0
-#define EP4_MPS      0x8C
+#define EP2_CFG_REG	0x0F0110A8
+#define EP2_CFG_INT	0x27
+#define EP2_CFG_BULK	0x25
 
-#define EP4_CFG_REG  0x0F0110F8
+#define EP4_MPS_REG	0x0F0110F0
+#define EP4_MPS		0x8C
 
-#define ISO_MPS_REG  0x0F0110C8
-#define ISO_MPS      0x00000000
+#define EP4_CFG_REG	0x0F0110F8
 
+#define ISO_MPS_REG	0x0F0110C8
+#define ISO_MPS		0x00000000
 
 #define EP1 0
 #define EP2 1
@@ -637,12 +585,9 @@ InitAdapter(PMINI_ADAPTER psAdapter);
 #define EP5 4
 #define EP6 5
 
-
-typedef enum eInterface_setting
-{
+typedef enum eInterface_setting {
 	DEFAULT_SETTING_0  = 0,
 	ALTERNATE_SETTING_1 = 1,
-}INTERFACE_SETTING;
-
-#endif	//__ADAPTER_H__
+} INTERFACE_SETTING;
 
+#endif	/* __ADAPTER_H__ */
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index 1c7db81a1ee8..2b46f4d4ef0e 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -1115,20 +1115,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 	    {
 	        case DDR_80_MHZ:
 				psDDRSetting = asT3LP_DDRSetting80MHz;
-                RegCount = (sizeof(asT3LP_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz);
 				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                 psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			break;
 		    case DDR_100_MHZ:
 				psDDRSetting = asT3LP_DDRSetting100MHz;
-			    RegCount = (sizeof(asT3LP_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz);
 				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                 psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			    break;
 		     case DDR_133_MHZ:
 				bOverrideSelfRefresh = TRUE;
 				psDDRSetting = asT3LP_DDRSetting133MHz;
-			    RegCount = (sizeof(asT3LP_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz);
 				RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		        psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
 				break;
@@ -1146,20 +1146,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 	    {
 	        case DDR_80_MHZ:
 				psDDRSetting = asT3LPB_DDRSetting80MHz;
-                RegCount=(sizeof(asT3LPB_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                RegCount=ARRAY_SIZE(asT3LPB_DDRSetting80MHz);
 				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                 psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			break;
 		    case DDR_100_MHZ:
 				psDDRSetting = asT3LPB_DDRSetting100MHz;
-			    RegCount = (sizeof(asT3LPB_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz);
 				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                 psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			    break;
 		     case DDR_133_MHZ:
 				bOverrideSelfRefresh = TRUE;
 				psDDRSetting = asT3LPB_DDRSetting133MHz;
-			    RegCount = (sizeof(asT3LPB_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz);
 				RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		        psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
 				break;
@@ -1167,7 +1167,7 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 			case DDR_160_MHZ:
 					bOverrideSelfRefresh = TRUE;
 					psDDRSetting = asT3LPB_DDRSetting160MHz;
-					RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(DDR_SET_NODE);
+					RegCount = ARRAY_SIZE(asT3LPB_DDRSetting160MHz);
 					RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
 					psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
 
@@ -1181,19 +1181,19 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 	    {
 	        case DDR_80_MHZ:
 				psDDRSetting = asT3_DDRSetting80MHz;
-                RegCount = (sizeof(asT3_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz);
 				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                 psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			break;
 		    case DDR_100_MHZ:
 				psDDRSetting = asT3_DDRSetting100MHz;
-			    RegCount = (sizeof(asT3_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz);
 				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                 psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			    break;
 		     case DDR_133_MHZ:
 				psDDRSetting = asT3_DDRSetting133MHz;
-			    RegCount = (sizeof(asT3_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			    RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz);
 				RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		        psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 				break;
@@ -1207,20 +1207,20 @@ int download_ddr_settings(PMINI_ADAPTER Adapter)
 		    {
 		        case DDR_80_MHZ:
 					psDDRSetting = asT3B_DDRSetting80MHz;
-                    RegCount = (sizeof(asT3B_DDRSetting80MHz)/sizeof(DDR_SET_NODE));
+                    RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz);
                     RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
                     psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
 			        break;
 		        case DDR_100_MHZ:
 					psDDRSetting = asT3B_DDRSetting100MHz;
-			        RegCount = (sizeof(asT3B_DDRSetting100MHz)/sizeof(DDR_SET_NODE));
+			        RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz);
                     RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
                     psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
 			        break;
 		        case DDR_133_MHZ:
 					bOverrideSelfRefresh = TRUE;
 					psDDRSetting = asT3B_DDRSetting133MHz;
-			        RegCount = (sizeof(asT3B_DDRSetting133MHz)/sizeof(DDR_SET_NODE));
+			        RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz);
 	                RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
 		            psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
 					break;
diff --git a/drivers/staging/bcm/IPv6Protocol.c b/drivers/staging/bcm/IPv6Protocol.c
index 5b4fd372ec36..1da21642c18e 100644
--- a/drivers/staging/bcm/IPv6Protocol.c
+++ b/drivers/staging/bcm/IPv6Protocol.c
@@ -1,51 +1,52 @@
 #include "headers.h"
 
-static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header);
-static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header);
+static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header);
+static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header);
 static VOID DumpIpv6Header(IPV6Header *pstIpv6Header);
 
-static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader,BOOLEAN *bParseDone,USHORT *pusPayloadLength)
+static UCHAR *GetNextIPV6ChainedHeader(UCHAR **ppucPayload,
+	UCHAR *pucNextHeader, BOOLEAN *bParseDone, USHORT *pusPayloadLength)
 {
 	UCHAR *pucRetHeaderPtr = NULL;
 	UCHAR *pucPayloadPtr = NULL;
 	USHORT  usNextHeaderOffset = 0 ;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 
-	if((NULL == ppucPayload) || (*pusPayloadLength == 0) || (*bParseDone))
-	{
+	if ((ppucPayload == NULL) || (*pusPayloadLength == 0) ||
+		(*bParseDone)) {
 		*bParseDone = TRUE;
 		return NULL;
-
 	}
 
 	pucRetHeaderPtr = *ppucPayload;
 	pucPayloadPtr = *ppucPayload;
 
-	if(!pucRetHeaderPtr || !pucPayloadPtr)
-	{
+	if (!pucRetHeaderPtr || !pucPayloadPtr) {
 		*bParseDone = TRUE;
 		return NULL;
 	}
 
-	//Get the Nextt Header Type
+	/* Get the Nextt Header Type */
 	*bParseDone = FALSE;
 
 
-
-	switch(*pucNextHeader)
-	{
+	switch (*pucNextHeader) {
 	case IPV6HDR_TYPE_HOPBYHOP:
 		{
 
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 HopByHop Header");
-			usNextHeaderOffset+=sizeof(IPV6HopByHopOptionsHeader);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 HopByHop Header");
+			usNextHeaderOffset += sizeof(IPV6HopByHopOptionsHeader);
 		}
 		break;
 
 	case IPV6HDR_TYPE_ROUTING:
 		{
 			IPV6RoutingHeader *pstIpv6RoutingHeader;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Routing Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Routing Header");
 			pstIpv6RoutingHeader = (IPV6RoutingHeader *)pucPayloadPtr;
 			usNextHeaderOffset += sizeof(IPV6RoutingHeader);
 			usNextHeaderOffset += pstIpv6RoutingHeader->ucNumAddresses * IPV6_ADDRESS_SIZEINBYTES;
@@ -54,8 +55,10 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 		break;
 	case IPV6HDR_TYPE_FRAGMENTATION:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Fragmentation Header");
-			usNextHeaderOffset+= sizeof(IPV6FragmentHeader);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 Fragmentation Header");
+			usNextHeaderOffset += sizeof(IPV6FragmentHeader);
 
 		}
 		break;
@@ -63,9 +66,11 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 		{
 			IPV6DestOptionsHeader *pstIpv6DestOptsHdr = (IPV6DestOptionsHeader *)pucPayloadPtr;
 			int nTotalOptions = pstIpv6DestOptsHdr->ucHdrExtLen;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 DestOpts Header Header");
-			usNextHeaderOffset+= sizeof(IPV6DestOptionsHeader);
-			usNextHeaderOffset+= nTotalOptions * IPV6_DESTOPTS_HDR_OPTIONSIZE ;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 DestOpts Header Header");
+			usNextHeaderOffset += sizeof(IPV6DestOptionsHeader);
+			usNextHeaderOffset += nTotalOptions * IPV6_DESTOPTS_HDR_OPTIONSIZE ;
 
 		}
 		break;
@@ -73,36 +78,43 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 		{
 			IPV6AuthenticationHeader *pstIpv6AuthHdr = (IPV6AuthenticationHeader *)pucPayloadPtr;
 			int nHdrLen = pstIpv6AuthHdr->ucLength;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Authentication Header");
-			usNextHeaderOffset+= nHdrLen * 4;
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 Authentication Header");
+			usNextHeaderOffset += nHdrLen * 4;
 		}
 		break;
 	case IPV6HDR_TYPE_ENCRYPTEDSECURITYPAYLOAD:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Encrypted Security Payload Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL,
+					"\nIPv6 Encrypted Security Payload Header");
 			*bParseDone = TRUE;
 
 		}
 		break;
 	case IPV6_ICMP_HDR_TYPE:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " ICMP Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nICMP Header");
 			*bParseDone = TRUE;
 		}
 		break;
 	case TCP_HEADER_TYPE:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nTCP Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nTCP Header");
 			*bParseDone = TRUE;
 		}
 		break;
 	case UDP_HEADER_TYPE:
 		{
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nUDP Header");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nUDP Header");
 			*bParseDone = TRUE;
 		}
 		break;
-	default :
+	default:
 		{
 			*bParseDone = TRUE;
 
@@ -112,53 +124,49 @@ static UCHAR * GetNextIPV6ChainedHeader(UCHAR **ppucPayload,UCHAR *pucNextHeader
 
 	}
 
-	if(*bParseDone == FALSE)
-	{
-		if(*pusPayloadLength <= usNextHeaderOffset)
-		{
+	if (*bParseDone == FALSE) {
+		if (*pusPayloadLength <= usNextHeaderOffset) {
 			*bParseDone = TRUE;
-		}
-		else
-		{
+		} else {
 			*pucNextHeader = *pucPayloadPtr;
-			pucPayloadPtr+=usNextHeaderOffset;
-			(*pusPayloadLength)-=usNextHeaderOffset;
+			pucPayloadPtr += usNextHeaderOffset;
+			(*pusPayloadLength) -= usNextHeaderOffset;
 		}
 
 	}
 
-
-
 	*ppucPayload = pucPayloadPtr;
 	return pucRetHeaderPtr;
 }
 
 
-static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload,USHORT *pusSrcPort,USHORT *pusDestPort,USHORT usPayloadLength,UCHAR ucNextHeader)
+static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload, USHORT *pusSrcPort,
+	USHORT *pusDestPort, USHORT usPayloadLength, UCHAR ucNextHeader)
 {
 	UCHAR *pIpv6HdrScanContext = pucPayload;
 	BOOLEAN bDone = FALSE;
-	UCHAR ucHeaderType =0;
+	UCHAR ucHeaderType = 0;
 	UCHAR *pucNextHeader = NULL;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 
-	if( !pucPayload || (usPayloadLength == 0))
-	{
+	if (!pucPayload || (usPayloadLength == 0))
 		return 0;
-	}
 
 	*pusSrcPort = *pusDestPort = 0;
 	ucHeaderType = ucNextHeader;
-	while(!bDone)
-	{
-		pucNextHeader = GetNextIPV6ChainedHeader(&pIpv6HdrScanContext,&ucHeaderType,&bDone,&usPayloadLength);
-		if(bDone)
-		{
-			if((ucHeaderType==TCP_HEADER_TYPE) || (ucHeaderType == UDP_HEADER_TYPE))
-			{
-				 *pusSrcPort=*((PUSHORT)(pucNextHeader));
-				 *pusDestPort=*((PUSHORT)(pucNextHeader+2));
-				 BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, " \nProtocol Ports - Src Port :0x%x Dest Port : 0x%x",ntohs(*pusSrcPort),ntohs(*pusDestPort));
+	while (!bDone) {
+		pucNextHeader = GetNextIPV6ChainedHeader(&pIpv6HdrScanContext,
+					&ucHeaderType, &bDone, &usPayloadLength);
+		if (bDone) {
+			if ((ucHeaderType == TCP_HEADER_TYPE) ||
+				(ucHeaderType == UDP_HEADER_TYPE)) {
+				*pusSrcPort = *((PUSHORT)(pucNextHeader));
+				*pusDestPort = *((PUSHORT)(pucNextHeader+2));
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+						DBG_LVL_ALL,
+						"\nProtocol Ports - Src Port :0x%x Dest Port : 0x%x",
+						ntohs(*pusSrcPort),
+						ntohs(*pusDestPort));
 			}
 			break;
 
@@ -168,92 +176,111 @@ static UCHAR GetIpv6ProtocolPorts(UCHAR *pucPayload,USHORT *pusSrcPort,USHORT *p
 }
 
 
-
-USHORT	IpVersion6(PMINI_ADAPTER Adapter, /**< Pointer to the driver control structure */
-					PVOID pcIpHeader, /**<Pointer to the IP Hdr of the packet*/
-					S_CLASSIFIER_RULE *pstClassifierRule )
+/*
+ * Arg 1 PMINI_ADAPTER Adapter is a pointer ot the driver contorl structure
+ * Arg 2 PVOID pcIpHeader is a pointer to the IP header of the packet
+ */
+USHORT	IpVersion6(PMINI_ADAPTER Adapter, PVOID pcIpHeader,
+					S_CLASSIFIER_RULE *pstClassifierRule)
 {
 	USHORT	ushDestPort = 0;
 	USHORT	ushSrcPort = 0;
-	UCHAR   ucNextProtocolAboveIP =0;
+	UCHAR   ucNextProtocolAboveIP = 0;
 	IPV6Header *pstIpv6Header = NULL;
 	BOOLEAN bClassificationSucceed = FALSE;
 
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "IpVersion6 ==========>\n");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+			DBG_LVL_ALL, "IpVersion6 ==========>\n");
 
 	pstIpv6Header = (IPV6Header *)pcIpHeader;
 
 	DumpIpv6Header(pstIpv6Header);
 
-	//Try to get the next higher layer protocol and the Ports Nos if TCP or UDP
+	/*
+	 * Try to get the next higher layer protocol
+	 * and the Ports Nos if TCP or UDP
+	 */
 	ucNextProtocolAboveIP = GetIpv6ProtocolPorts((UCHAR *)(pcIpHeader + sizeof(IPV6Header)),
 							&ushSrcPort,
 							&ushDestPort,
 							pstIpv6Header->usPayloadLength,
 							pstIpv6Header->ucNextHeader);
 
-	do
-	{
-		if(0 == pstClassifierRule->ucDirection)
-		{
-			//cannot be processed for classification.
-		   // it is a down link connection
+	do {
+		if (pstClassifierRule->ucDirection == 0) {
+			/*
+			 * cannot be processed for classification.
+			 * it is a down link connection
+			 */
 			break;
 		}
 
-		if(!pstClassifierRule->bIpv6Protocol)
-		{
-			//We are looking for Ipv6 Classifiers . Lets ignore this classifier and try the next one.
+		if (!pstClassifierRule->bIpv6Protocol) {
+			/*
+			 * We are looking for Ipv6 Classifiers
+			 * Lets ignore this classifier and try the next one
+			 */
 			break;
 		}
 
-		bClassificationSucceed=MatchSrcIpv6Address(pstClassifierRule,pstIpv6Header);
-        if(!bClassificationSucceed)
-            break;
+		bClassificationSucceed = MatchSrcIpv6Address(pstClassifierRule,
+								pstIpv6Header);
+		if (!bClassificationSucceed)
+			break;
 
-        bClassificationSucceed=MatchDestIpv6Address(pstClassifierRule,pstIpv6Header);
-        if(!bClassificationSucceed)
-            break;
+		bClassificationSucceed = MatchDestIpv6Address(pstClassifierRule,
+								pstIpv6Header);
+		if (!bClassificationSucceed)
+			break;
 
-		//Match the protocol type.For IPv6 the next protocol at end of Chain of IPv6 prot headers
-		bClassificationSucceed=MatchProtocol(pstClassifierRule,ucNextProtocolAboveIP);
-        if(!bClassificationSucceed)
-            break;
-        BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Protocol Matched");
+		/*
+		 * Match the protocol type.
+		 * For IPv6 the next protocol at end of
+		 * Chain of IPv6 prot headers
+		 */
+		bClassificationSucceed = MatchProtocol(pstClassifierRule,
+							ucNextProtocolAboveIP);
+		if (!bClassificationSucceed)
+			break;
 
-		if((ucNextProtocolAboveIP == TCP_HEADER_TYPE) || (ucNextProtocolAboveIP == UDP_HEADER_TYPE))
-		{
-			//Match Src Port
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Source Port:%x\n",ntohs(ushSrcPort));
-			bClassificationSucceed=MatchSrcPort(pstClassifierRule,ntohs(ushSrcPort));
-			if(!bClassificationSucceed)
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+				DBG_LVL_ALL, "\nIPv6 Protocol Matched");
+
+		if ((ucNextProtocolAboveIP == TCP_HEADER_TYPE) ||
+			(ucNextProtocolAboveIP == UDP_HEADER_TYPE)) {
+			/* Match Src Port */
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Source Port:%x\n",
+					ntohs(ushSrcPort));
+			bClassificationSucceed = MatchSrcPort(pstClassifierRule,
+							ntohs(ushSrcPort));
+			if (!bClassificationSucceed)
 				break;
 
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Src Port Matched");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Src Port Matched");
 
-			//Match Dest Port
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Destination Port:%x\n",ntohs(ushDestPort));
-			bClassificationSucceed=MatchDestPort(pstClassifierRule,ntohs(ushDestPort));
-			if(!bClassificationSucceed)
+			/* Match Dest Port */
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Destination Port:%x\n",
+					ntohs(ushDestPort));
+			bClassificationSucceed = MatchDestPort(pstClassifierRule,
+							ntohs(ushDestPort));
+			if (!bClassificationSucceed)
 				break;
-			BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\nIPv6 Dest Port Matched");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+					DBG_LVL_ALL, "\nIPv6 Dest Port Matched");
 		}
-	}while(0);
+	} while (0);
 
-	if(TRUE==bClassificationSucceed)
-	{
+	if (bClassificationSucceed == TRUE) {
 		INT iMatchedSFQueueIndex = 0;
-		iMatchedSFQueueIndex = SearchSfid(Adapter,pstClassifierRule->ulSFID);
-		if(iMatchedSFQueueIndex >= NO_OF_QUEUES)
-		{
+		iMatchedSFQueueIndex = SearchSfid(Adapter, pstClassifierRule->ulSFID);
+		if (iMatchedSFQueueIndex >= NO_OF_QUEUES) {
 			bClassificationSucceed = FALSE;
-		}
-		else
-		{
-			if(FALSE == Adapter->PackInfo[iMatchedSFQueueIndex].bActive)
-			{
+		} else {
+			if (Adapter->PackInfo[iMatchedSFQueueIndex].bActive == FALSE)
 				bClassificationSucceed = FALSE;
-			}
 		}
 	}
 
@@ -261,52 +288,55 @@ USHORT	IpVersion6(PMINI_ADAPTER Adapter, /**< Pointer to the driver control stru
 }
 
 
-static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header)
+static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header)
 {
-	UINT uiLoopIndex=0;
-	UINT  uiIpv6AddIndex=0;
-	UINT  uiIpv6AddrNoLongWords = 4;
+	UINT uiLoopIndex = 0;
+	UINT uiIpv6AddIndex = 0;
+	UINT uiIpv6AddrNoLongWords = 4;
 	ULONG aulSrcIP[4];
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 	/*
-	//This is the no. of Src Addresses ie Range of IP Addresses contained
-	//in the classifier rule for which we need to match
-	*/
+	 * This is the no. of Src Addresses ie Range of IP Addresses contained
+	 * in the classifier rule for which we need to match
+	 */
 	UINT  uiCountIPSrcAddresses = (UINT)pstClassifierRule->ucIPSourceAddressLength;
 
 
-	if(0 == uiCountIPSrcAddresses)
+	if (uiCountIPSrcAddresses == 0)
 		return TRUE;
 
 
-	//First Convert the Ip Address in the packet to Host Endian order
-	for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-	{
-		aulSrcIP[uiIpv6AddIndex]=ntohl(pstIpv6Header->ulSrcIpAddress[uiIpv6AddIndex]);
-	}
+	/* First Convert the Ip Address in the packet to Host Endian order */
+	for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++)
+		aulSrcIP[uiIpv6AddIndex] = ntohl(pstIpv6Header->ulSrcIpAddress[uiIpv6AddIndex]);
 
-	for(uiLoopIndex=0;uiLoopIndex<uiCountIPSrcAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
-	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Received Packet : \n ");
+	for (uiLoopIndex = 0; uiLoopIndex < uiCountIPSrcAddresses; uiLoopIndex += uiIpv6AddrNoLongWords) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Src Ipv6 Address In Received Packet :\n ");
 		DumpIpv6Address(aulSrcIP);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Mask In Classifier Rule: \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Src Ipv6 Mask In Classifier Rule:\n");
 		DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex]);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Classifier Rule : \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Src Ipv6 Address In Classifier Rule :\n");
 		DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex]);
 
-		for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-		{
-			if((pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulSrcIP[uiIpv6AddIndex])
-				!= pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex])
-			{
-				//Match failed for current Ipv6 Address.Try next Ipv6 Address
+		for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) {
+			if ((pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulSrcIP[uiIpv6AddIndex])
+				!= pstClassifierRule->stSrcIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) {
+				/*
+				 * Match failed for current Ipv6 Address
+				 * Try next Ipv6 Address
+				 */
 				break;
 			}
 
-			if(uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1)
-			{
-				//Match Found
-				BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Ipv6 Src Ip Address Matched\n");
+			if (uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1) {
+				/* Match Found */
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+						DBG_LVL_ALL,
+						"Ipv6 Src Ip Address Matched\n");
 				return TRUE;
 			}
 		}
@@ -314,52 +344,56 @@ static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Head
 	return FALSE;
 }
 
-static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Header *pstIpv6Header)
+static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,
+	IPV6Header *pstIpv6Header)
 {
-	UINT uiLoopIndex=0;
-	UINT  uiIpv6AddIndex=0;
-	UINT  uiIpv6AddrNoLongWords = 4;
+	UINT uiLoopIndex = 0;
+	UINT uiIpv6AddIndex = 0;
+	UINT uiIpv6AddrNoLongWords = 4;
 	ULONG aulDestIP[4];
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
 	/*
-	//This is the no. of Destination Addresses ie Range of IP Addresses contained
-	//in the classifier rule for which we need to match
-	*/
+	 * This is the no. of Destination Addresses
+	 * ie Range of IP Addresses contained in the classifier rule
+	 * for which we need to match
+	 */
 	UINT  uiCountIPDestinationAddresses = (UINT)pstClassifierRule->ucIPDestinationAddressLength;
 
 
-	if(0 == uiCountIPDestinationAddresses)
+	if (uiCountIPDestinationAddresses == 0)
 		return TRUE;
 
 
-	//First Convert the Ip Address in the packet to Host Endian order
-	for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-	{
-		aulDestIP[uiIpv6AddIndex]=ntohl(pstIpv6Header->ulDestIpAddress[uiIpv6AddIndex]);
-	}
+	/* First Convert the Ip Address in the packet to Host Endian order */
+	for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++)
+		aulDestIP[uiIpv6AddIndex] = ntohl(pstIpv6Header->ulDestIpAddress[uiIpv6AddIndex]);
 
-	for(uiLoopIndex=0;uiLoopIndex<uiCountIPDestinationAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
-	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Received Packet : \n ");
+	for (uiLoopIndex = 0; uiLoopIndex < uiCountIPDestinationAddresses; uiLoopIndex += uiIpv6AddrNoLongWords) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Destination Ipv6 Address In Received Packet :\n ");
 		DumpIpv6Address(aulDestIP);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Mask In Classifier Rule: \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Destination Ipv6 Mask In Classifier Rule :\n");
 		DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex]);
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Classifier Rule : \n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				"\n Destination Ipv6 Address In Classifier Rule :\n");
 		DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex]);
 
-		for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-		{
-			if((pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulDestIP[uiIpv6AddIndex])
-				!= pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex])
-			{
-				//Match failed for current Ipv6 Address.Try next Ipv6 Address
+		for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) {
+			if ((pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex+uiIpv6AddIndex] & aulDestIP[uiIpv6AddIndex])
+				!= pstClassifierRule->stDestIpAddress.ulIpv6Addr[uiLoopIndex+uiIpv6AddIndex]) {
+				/*
+				 * Match failed for current Ipv6 Address.
+				 * Try next Ipv6 Address
+				 */
 				break;
 			}
 
-			if(uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1)
-			{
-				//Match Found
-				BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Ipv6 Destination Ip Address Matched\n");
+			if (uiIpv6AddIndex ==  uiIpv6AddrNoLongWords-1) {
+				/* Match Found */
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG,
+						DBG_LVL_ALL,
+						"Ipv6 Destination Ip Address Matched\n");
 				return TRUE;
 			}
 		}
@@ -371,11 +405,11 @@ static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Hea
 VOID DumpIpv6Address(ULONG *puIpv6Address)
 {
 	UINT uiIpv6AddrNoLongWords = 4;
-	UINT  uiIpv6AddIndex=0;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
-	for(uiIpv6AddIndex=0;uiIpv6AddIndex<uiIpv6AddrNoLongWords;uiIpv6AddIndex++)
-	{
-		BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, ":%lx",puIpv6Address[uiIpv6AddIndex]);
+	UINT uiIpv6AddIndex = 0;
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	for (uiIpv6AddIndex = 0; uiIpv6AddIndex < uiIpv6AddrNoLongWords; uiIpv6AddIndex++) {
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+				":%lx", puIpv6Address[uiIpv6AddIndex]);
 	}
 
 }
@@ -383,22 +417,35 @@ VOID DumpIpv6Address(ULONG *puIpv6Address)
 static VOID DumpIpv6Header(IPV6Header *pstIpv6Header)
 {
 	UCHAR ucVersion;
-	UCHAR  ucPrio ;
-    PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "----Ipv6 Header---");
+	UCHAR ucPrio;
+	PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"----Ipv6 Header---");
 	ucVersion = pstIpv6Header->ucVersionPrio & 0xf0;
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Version : %x \n",ucVersion);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Version : %x\n", ucVersion);
 	ucPrio = pstIpv6Header->ucVersionPrio & 0x0f;
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Priority : %x \n",ucPrio);
-	//BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Flow Label : %x \n",(pstIpv6Header->ucVersionPrio &0xf0);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Payload Length : %x \n",ntohs(pstIpv6Header->usPayloadLength));
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Next Header : %x \n",pstIpv6Header->ucNextHeader);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Hop Limit : %x \n",pstIpv6Header->ucHopLimit);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Src Address :\n");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Priority : %x\n", ucPrio);
+	/*
+	 * BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+	 * "Flow Label : %x\n",(pstIpv6Header->ucVersionPrio &0xf0);
+	 */
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Payload Length : %x\n",
+			ntohs(pstIpv6Header->usPayloadLength));
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Next Header : %x\n", pstIpv6Header->ucNextHeader);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Hop Limit : %x\n", pstIpv6Header->ucHopLimit);
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Src Address :\n");
 	DumpIpv6Address(pstIpv6Header->ulSrcIpAddress);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "Dest Address :\n");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"Dest Address :\n");
 	DumpIpv6Address(pstIpv6Header->ulDestIpAddress);
-	BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "----Ipv6 Header End---");
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL,
+			"----Ipv6 Header End---");
 
 
 }
diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c
index c7725e141fd5..8223a6913fc5 100644
--- a/drivers/staging/bcm/Misc.c
+++ b/drivers/staging/bcm/Misc.c
@@ -835,7 +835,7 @@ int reset_card_proc(PMINI_ADAPTER ps_adapter)
 	Bcm_kill_all_URBs(psIntfAdapter);
 	/* Reset the UMA-B Device */
 	if (ps_adapter->chip_id >= T3LPB) {
-		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reseting UMA-B\n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Resetting UMA-B\n");
 		retval = usb_reset_device(psIntfAdapter->udev);
 		psIntfAdapter->psAdapter->StopAllXaction = FALSE;
 
diff --git a/drivers/staging/ccg/Kconfig b/drivers/staging/ccg/Kconfig
new file mode 100644
index 000000000000..ff05e52392bf
--- /dev/null
+++ b/drivers/staging/ccg/Kconfig
@@ -0,0 +1,20 @@
+if USB_GADGET
+
+config USB_G_CCG
+	tristate "Configurable Composite Gadget (STAGING)"
+	depends on STAGING && !USB_ZERO && !USB_ZERO_HNPTEST && !USB_AUDIO && !GADGET_UAC1 && !USB_ETH && !USB_ETH_RNDIS && !USB_ETH_EEM && !USB_G_NCM && !USB_GADGETFS && !USB_FUNCTIONFS && !USB_FUNCTIONFS_ETH && !USB_FUNCTIONFS_RNDIS && !USB_FUNCTIONFS_GENERIC && !USB_FILE_STORAGE && !USB_FILE_STORAGE_TEST && !USB_MASS_STORAGE && !USB_G_SERIAL && !USB_MIDI_GADGET && !USB_G_PRINTER && !USB_CDC_COMPOSITE && !USB_G_NOKIA && !USB_G_ACM_MS && !USB_G_MULTI && !USB_G_MULTI_RNDIS && !USB_G_MULTI_CDC && !USB_G_HID && !USB_G_DBGP && !USB_G_WEBCAM
+	help
+	  The Configurable Composite Gadget supports multiple USB
+	  functions: acm, mass storage, rndis and FunctionFS.
+	  Each function can be configured and enabled/disabled
+	  dynamically from userspace through a sysfs interface.
+
+	  In order to compile this (either as a module or built-in),
+	  "USB Gadget Drivers" and anything under it must not be
+	  selected compiled-in in
+	  Device Drivers->USB Support->USB Gadget Support.
+	  However, you can say "M" there, if you do, the
+	  Configurable Composite Gadget can be compiled "M" only
+	  or not at all.
+
+endif # USB_GADGET
diff --git a/drivers/staging/ccg/Makefile b/drivers/staging/ccg/Makefile
new file mode 100644
index 000000000000..693da637a6d8
--- /dev/null
+++ b/drivers/staging/ccg/Makefile
@@ -0,0 +1,4 @@
+g_ccg-y				:= ccg.o
+ccflags-y			+= -Idrivers/usb/gadget
+
+obj-$(CONFIG_USB_G_CCG)		+= g_ccg.o
diff --git a/drivers/staging/ccg/TODO b/drivers/staging/ccg/TODO
new file mode 100644
index 000000000000..18612fe70171
--- /dev/null
+++ b/drivers/staging/ccg/TODO
@@ -0,0 +1,6 @@
+TODO:
+	- change configuration interface from sysfs to configfs
+
+Please send patches to Greg Kroah-Hartmann <gregkh@linuxfoundation.org>,
+Andrzej Pietrasiewicz <andrzej.p@samsung.com>, and
+Cc: Mike Lockwood <lockwood@android.com>
diff --git a/drivers/staging/ccg/ccg.c b/drivers/staging/ccg/ccg.c
new file mode 100644
index 000000000000..a5b36a97598d
--- /dev/null
+++ b/drivers/staging/ccg/ccg.c
@@ -0,0 +1,1299 @@
+/*
+ * Configurable Composite Gadget
+ *
+ * Initially contributed as "Android Composite Gdaget" by:
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *         Benoit Goby <benoit@android.com>
+ *
+ * Tailoring it to become a generic Configurable Composite Gadget is
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+
+#include "gadget_chips.h"
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+#include "../../usb/gadget/usbstring.c"
+#include "../../usb/gadget/config.c"
+#include "../../usb/gadget/epautoconf.c"
+#include "../../usb/gadget/composite.c"
+
+#include "../../usb/gadget/f_mass_storage.c"
+#include "../../usb/gadget/u_serial.c"
+#include "../../usb/gadget/f_acm.c"
+#define USB_ETH_RNDIS y
+#include "../../usb/gadget/f_rndis.c"
+#include "../../usb/gadget/rndis.c"
+#include "../../usb/gadget/u_ether.c"
+#include "../../usb/gadget/f_fs.c"
+
+MODULE_AUTHOR("Mike Lockwood, Andrzej Pietrasiewicz");
+MODULE_DESCRIPTION("Configurable Composite USB Gadget");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0");
+
+static const char longname[] = "Configurable Composite Gadget";
+
+/* Default vendor and product IDs, overridden by userspace */
+#define VENDOR_ID		0x1d6b /* Linux Foundation */
+#define PRODUCT_ID		0x0107
+#define GFS_MAX_DEVS		10
+
+struct ccg_usb_function {
+	char *name;
+	void *config;
+
+	struct device *dev;
+	char *dev_name;
+	struct device_attribute **attributes;
+
+	/* for ccg_dev.enabled_functions */
+	struct list_head enabled_list;
+
+	/* Optional: initialization during gadget bind */
+	int (*init)(struct ccg_usb_function *, struct usb_composite_dev *);
+	/* Optional: cleanup during gadget unbind */
+	void (*cleanup)(struct ccg_usb_function *);
+
+	int (*bind_config)(struct ccg_usb_function *,
+			   struct usb_configuration *);
+
+	/* Optional: called when the configuration is removed */
+	void (*unbind_config)(struct ccg_usb_function *,
+			      struct usb_configuration *);
+	/* Optional: handle ctrl requests before the device is configured */
+	int (*ctrlrequest)(struct ccg_usb_function *,
+			   struct usb_composite_dev *,
+			   const struct usb_ctrlrequest *);
+};
+
+struct ffs_obj {
+	const char *name;
+	bool mounted;
+	bool desc_ready;
+	bool used;
+	struct ffs_data *ffs_data;
+};
+
+struct ccg_dev {
+	struct ccg_usb_function **functions;
+	struct list_head enabled_functions;
+	struct usb_composite_dev *cdev;
+	struct device *dev;
+
+	bool enabled;
+	struct mutex mutex;
+	bool connected;
+	bool sw_connected;
+	struct work_struct work;
+
+	unsigned int max_func_num;
+	unsigned int func_num;
+	struct ffs_obj ffs_tab[GFS_MAX_DEVS];
+};
+
+static struct class *ccg_class;
+static struct ccg_dev *_ccg_dev;
+static int ccg_bind_config(struct usb_configuration *c);
+static void ccg_unbind_config(struct usb_configuration *c);
+
+static char func_names_buf[256];
+
+static struct usb_device_descriptor device_desc = {
+	.bLength              = sizeof(device_desc),
+	.bDescriptorType      = USB_DT_DEVICE,
+	.bcdUSB               = __constant_cpu_to_le16(0x0200),
+	.bDeviceClass         = USB_CLASS_PER_INTERFACE,
+	.idVendor             = __constant_cpu_to_le16(VENDOR_ID),
+	.idProduct            = __constant_cpu_to_le16(PRODUCT_ID),
+	.bcdDevice            = __constant_cpu_to_le16(0xffff),
+	.bNumConfigurations   = 1,
+};
+
+static struct usb_configuration ccg_config_driver = {
+	.label		= "ccg",
+	.unbind		= ccg_unbind_config,
+	.bConfigurationValue = 1,
+	.bmAttributes	= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+	.bMaxPower	= 0xFA, /* 500ma */
+};
+
+static void ccg_work(struct work_struct *data)
+{
+	struct ccg_dev *dev = container_of(data, struct ccg_dev, work);
+	struct usb_composite_dev *cdev = dev->cdev;
+	static char *disconnected[2] = { "USB_STATE=DISCONNECTED", NULL };
+	static char *connected[2]    = { "USB_STATE=CONNECTED", NULL };
+	static char *configured[2]   = { "USB_STATE=CONFIGURED", NULL };
+	char **uevent_envp = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cdev->lock, flags);
+	if (cdev->config)
+		uevent_envp = configured;
+	else if (dev->connected != dev->sw_connected)
+		uevent_envp = dev->connected ? connected : disconnected;
+	dev->sw_connected = dev->connected;
+	spin_unlock_irqrestore(&cdev->lock, flags);
+
+	if (uevent_envp) {
+		kobject_uevent_env(&dev->dev->kobj, KOBJ_CHANGE, uevent_envp);
+		pr_info("%s: sent uevent %s\n", __func__, uevent_envp[0]);
+	} else {
+		pr_info("%s: did not send uevent (%d %d %p)\n", __func__,
+			 dev->connected, dev->sw_connected, cdev->config);
+	}
+}
+
+
+/*-------------------------------------------------------------------------*/
+/* Supported functions initialization */
+
+static struct ffs_obj *functionfs_find_dev(struct ccg_dev *dev,
+					   const char *dev_name)
+{
+	int i;
+
+	for (i = 0; i < dev->max_func_num; i++)
+		if (strcmp(dev->ffs_tab[i].name, dev_name) == 0)
+			return &dev->ffs_tab[i];
+
+	return NULL;
+}
+
+static bool functionfs_all_ready(struct ccg_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < dev->max_func_num; i++)
+		if (dev->ffs_tab[i].used && !dev->ffs_tab[i].desc_ready)
+			return false;
+
+	return true;
+}
+
+static int functionfs_ready_callback(struct ffs_data *ffs)
+{
+	struct ffs_obj *ffs_obj;
+	int ret;
+
+	mutex_lock(&_ccg_dev->mutex);
+
+	ffs_obj = ffs->private_data;
+	if (!ffs_obj) {
+		ret = -EINVAL;
+		goto done;
+	}
+	if (WARN_ON(ffs_obj->desc_ready)) {
+		ret = -EBUSY;
+		goto done;
+	}
+	ffs_obj->ffs_data = ffs;
+
+	if (functionfs_all_ready(_ccg_dev)) {
+		ret = -EBUSY;
+		goto done;
+	}
+	ffs_obj->desc_ready = true;
+
+done:
+	mutex_unlock(&_ccg_dev->mutex);
+	return ret;
+}
+
+static void reset_usb(struct ccg_dev *dev)
+{
+	/* Cancel pending control requests */
+	usb_ep_dequeue(dev->cdev->gadget->ep0, dev->cdev->req);
+	usb_remove_config(dev->cdev, &ccg_config_driver);
+	dev->enabled = false;
+	usb_gadget_disconnect(dev->cdev->gadget);
+}
+
+static void functionfs_closed_callback(struct ffs_data *ffs)
+{
+	struct ffs_obj *ffs_obj;
+
+	mutex_lock(&_ccg_dev->mutex);
+
+	ffs_obj = ffs->private_data;
+	if (!ffs_obj)
+		goto done;
+
+	ffs_obj->desc_ready = false;
+
+	if (_ccg_dev->enabled)
+		reset_usb(_ccg_dev);
+
+done:
+	mutex_unlock(&_ccg_dev->mutex);
+}
+
+static void *functionfs_acquire_dev_callback(const char *dev_name)
+{
+	struct ffs_obj *ffs_dev;
+
+	mutex_lock(&_ccg_dev->mutex);
+
+	ffs_dev = functionfs_find_dev(_ccg_dev, dev_name);
+	if (!ffs_dev) {
+		ffs_dev = ERR_PTR(-ENODEV);
+		goto done;
+	}
+
+	if (ffs_dev->mounted) {
+		ffs_dev = ERR_PTR(-EBUSY);
+		goto done;
+	}
+	ffs_dev->mounted = true;
+
+done:
+	mutex_unlock(&_ccg_dev->mutex);
+	return ffs_dev;
+}
+
+static void functionfs_release_dev_callback(struct ffs_data *ffs_data)
+{
+	struct ffs_obj *ffs_dev;
+
+	mutex_lock(&_ccg_dev->mutex);
+
+	ffs_dev = ffs_data->private_data;
+	if (ffs_dev)
+		ffs_dev->mounted = false;
+
+	mutex_unlock(&_ccg_dev->mutex);
+}
+
+static int functionfs_function_init(struct ccg_usb_function *f,
+				struct usb_composite_dev *cdev)
+{
+	return functionfs_init();
+}
+
+static void functionfs_function_cleanup(struct ccg_usb_function *f)
+{
+	functionfs_cleanup();
+}
+
+static int functionfs_function_bind_config(struct ccg_usb_function *f,
+					   struct usb_configuration *c)
+{
+	struct ccg_dev *dev = _ccg_dev;
+	int i, ret;
+
+	for (i = dev->max_func_num; i--; ) {
+		if (!dev->ffs_tab[i].used)
+			continue;
+		ret = functionfs_bind(dev->ffs_tab[i].ffs_data, c->cdev);
+		if (unlikely(ret < 0)) {
+			while (++i < dev->max_func_num)
+				functionfs_unbind(dev->ffs_tab[i].ffs_data);
+			return ret;
+		}
+	}
+
+	for (i = dev->max_func_num; i--; ) {
+		if (!dev->ffs_tab[i].used)
+			continue;
+		ret = functionfs_bind_config(c->cdev, c,
+					     dev->ffs_tab[i].ffs_data);
+		if (unlikely(ret < 0))
+			return ret;
+	}
+
+	return 0;
+}
+
+static void functionfs_function_unbind_config(struct ccg_usb_function *f,
+					      struct usb_configuration *c)
+{
+	struct ccg_dev *dev = _ccg_dev;
+	int i;
+
+	for (i = dev->max_func_num; i--; )
+		if (dev->ffs_tab[i].ffs_data)
+			functionfs_unbind(dev->ffs_tab[i].ffs_data);
+}
+
+static ssize_t functionfs_user_functions_show(struct device *_dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	struct ccg_dev *dev = _ccg_dev;
+	char *buff = buf;
+	int i;
+
+	mutex_lock(&dev->mutex);
+
+	for (i = 0; i < dev->max_func_num; i++)
+		buff += snprintf(buff, PAGE_SIZE + buf - buff, "%s,",
+				 dev->ffs_tab[i].name);
+
+	mutex_unlock(&dev->mutex);
+
+	if (buff != buf)
+		*(buff - 1) = '\n';
+	return buff - buf;
+}
+
+static ssize_t functionfs_user_functions_store(struct device *_dev,
+					       struct device_attribute *attr,
+					       const char *buff, size_t size)
+{
+	struct ccg_dev *dev = _ccg_dev;
+	char *name, *b;
+	ssize_t ret = size;
+	int i;
+
+	buff = skip_spaces(buff);
+	if (!*buff)
+		return -EINVAL;
+
+	mutex_lock(&dev->mutex);
+
+	if (dev->enabled) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	for (i = 0; i < dev->max_func_num; i++)
+		if (dev->ffs_tab[i].mounted) {
+			ret = -EBUSY;
+			goto end;
+		}
+
+	strlcpy(func_names_buf, buff, sizeof(func_names_buf));
+	b = strim(func_names_buf);
+
+	/* replace the list of functions */
+	dev->max_func_num = 0;
+	while (b) {
+		name = strsep(&b, ",");
+		if (dev->max_func_num == GFS_MAX_DEVS) {
+			ret = -ENOSPC;
+			goto end;
+		}
+		if (functionfs_find_dev(dev, name)) {
+			ret = -EEXIST;
+			continue;
+		}
+		dev->ffs_tab[dev->max_func_num++].name = name;
+	}
+
+end:
+	mutex_unlock(&dev->mutex);
+	return ret;
+}
+
+static DEVICE_ATTR(user_functions, S_IRUGO | S_IWUSR,
+		   functionfs_user_functions_show,
+		   functionfs_user_functions_store);
+
+static ssize_t functionfs_max_user_functions_show(struct device *_dev,
+						  struct device_attribute *attr,
+						  char *buf)
+{
+	return sprintf(buf, "%d", GFS_MAX_DEVS);
+}
+
+static DEVICE_ATTR(max_user_functions, S_IRUGO,
+		   functionfs_max_user_functions_show, NULL);
+
+static struct device_attribute *functionfs_function_attributes[] = {
+	&dev_attr_user_functions,
+	&dev_attr_max_user_functions,
+	NULL
+};
+
+static struct ccg_usb_function functionfs_function = {
+	.name		= "fs",
+	.init		= functionfs_function_init,
+	.cleanup	= functionfs_function_cleanup,
+	.bind_config	= functionfs_function_bind_config,
+	.unbind_config  = functionfs_function_unbind_config,
+	.attributes	= functionfs_function_attributes,
+};
+
+#define MAX_ACM_INSTANCES 4
+struct acm_function_config {
+	int instances;
+};
+
+static int
+acm_function_init(struct ccg_usb_function *f, struct usb_composite_dev *cdev)
+{
+	f->config = kzalloc(sizeof(struct acm_function_config), GFP_KERNEL);
+	if (!f->config)
+		return -ENOMEM;
+
+	return gserial_setup(cdev->gadget, MAX_ACM_INSTANCES);
+}
+
+static void acm_function_cleanup(struct ccg_usb_function *f)
+{
+	gserial_cleanup();
+	kfree(f->config);
+	f->config = NULL;
+}
+
+static int
+acm_function_bind_config(struct ccg_usb_function *f,
+		struct usb_configuration *c)
+{
+	int i;
+	int ret = 0;
+	struct acm_function_config *config = f->config;
+
+	for (i = 0; i < config->instances; i++) {
+		ret = acm_bind_config(c, i);
+		if (ret) {
+			pr_err("Could not bind acm%u config\n", i);
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static ssize_t acm_instances_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct ccg_usb_function *f = dev_get_drvdata(dev);
+	struct acm_function_config *config = f->config;
+	return sprintf(buf, "%d\n", config->instances);
+}
+
+static ssize_t acm_instances_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct ccg_usb_function *f = dev_get_drvdata(dev);
+	struct acm_function_config *config = f->config;
+	int value;
+	int ret = 0;
+
+	ret = kstrtoint(buf, 10, &value);
+	if (ret)
+		return ret;
+
+	if (value > MAX_ACM_INSTANCES)
+		return -EINVAL;
+
+	config->instances = value;
+
+	return size;
+}
+
+static DEVICE_ATTR(instances, S_IRUGO | S_IWUSR, acm_instances_show,
+						 acm_instances_store);
+static struct device_attribute *acm_function_attributes[] = {
+	&dev_attr_instances,
+	NULL
+};
+
+static struct ccg_usb_function acm_function = {
+	.name		= "acm",
+	.init		= acm_function_init,
+	.cleanup	= acm_function_cleanup,
+	.bind_config	= acm_function_bind_config,
+	.attributes	= acm_function_attributes,
+};
+
+struct rndis_function_config {
+	u8      ethaddr[ETH_ALEN];
+	u32     vendorID;
+	char	manufacturer[256];
+	/* "Wireless" RNDIS; auto-detected by Windows */
+	bool	wceis;
+};
+
+static int rndis_function_init(struct ccg_usb_function *f,
+			       struct usb_composite_dev *cdev)
+{
+	f->config = kzalloc(sizeof(struct rndis_function_config), GFP_KERNEL);
+	if (!f->config)
+		return -ENOMEM;
+	return 0;
+}
+
+static void rndis_function_cleanup(struct ccg_usb_function *f)
+{
+	kfree(f->config);
+	f->config = NULL;
+}
+
+static int rndis_function_bind_config(struct ccg_usb_function *f,
+				      struct usb_configuration *c)
+{
+	int ret;
+	struct rndis_function_config *rndis = f->config;
+
+	if (!rndis) {
+		pr_err("%s: rndis_pdata\n", __func__);
+		return -1;
+	}
+
+	pr_info("%s MAC: %02X:%02X:%02X:%02X:%02X:%02X\n", __func__,
+		rndis->ethaddr[0], rndis->ethaddr[1], rndis->ethaddr[2],
+		rndis->ethaddr[3], rndis->ethaddr[4], rndis->ethaddr[5]);
+
+	ret = gether_setup_name(c->cdev->gadget, rndis->ethaddr, "rndis");
+	if (ret) {
+		pr_err("%s: gether_setup failed\n", __func__);
+		return ret;
+	}
+
+	if (rndis->wceis) {
+		/* "Wireless" RNDIS; auto-detected by Windows */
+		rndis_iad_descriptor.bFunctionClass =
+						USB_CLASS_WIRELESS_CONTROLLER;
+		rndis_iad_descriptor.bFunctionSubClass = 0x01;
+		rndis_iad_descriptor.bFunctionProtocol = 0x03;
+		rndis_control_intf.bInterfaceClass =
+						USB_CLASS_WIRELESS_CONTROLLER;
+		rndis_control_intf.bInterfaceSubClass =	 0x01;
+		rndis_control_intf.bInterfaceProtocol =	 0x03;
+	}
+
+	return rndis_bind_config_vendor(c, rndis->ethaddr, rndis->vendorID,
+					   rndis->manufacturer);
+}
+
+static void rndis_function_unbind_config(struct ccg_usb_function *f,
+						struct usb_configuration *c)
+{
+	gether_cleanup();
+}
+
+static ssize_t rndis_manufacturer_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct ccg_usb_function *f = dev_get_drvdata(dev);
+	struct rndis_function_config *config = f->config;
+	return sprintf(buf, "%s\n", config->manufacturer);
+}
+
+static ssize_t rndis_manufacturer_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct ccg_usb_function *f = dev_get_drvdata(dev);
+	struct rndis_function_config *config = f->config;
+
+	if (size >= sizeof(config->manufacturer))
+		return -EINVAL;
+	memcpy(config->manufacturer, buf, size);
+	config->manufacturer[size] = 0;
+
+	return size;
+}
+
+static DEVICE_ATTR(manufacturer, S_IRUGO | S_IWUSR, rndis_manufacturer_show,
+						    rndis_manufacturer_store);
+
+static ssize_t rndis_wceis_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct ccg_usb_function *f = dev_get_drvdata(dev);
+	struct rndis_function_config *config = f->config;
+	return sprintf(buf, "%d\n", config->wceis);
+}
+
+static ssize_t rndis_wceis_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct ccg_usb_function *f = dev_get_drvdata(dev);
+	struct rndis_function_config *config = f->config;
+	int value;
+	int ret;
+
+	ret = kstrtoint(buf, 10, &value);
+	if (ret)
+		return ret;
+
+	config->wceis = value;
+
+	return size;
+}
+
+static DEVICE_ATTR(wceis, S_IRUGO | S_IWUSR, rndis_wceis_show,
+					     rndis_wceis_store);
+
+static ssize_t rndis_ethaddr_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct ccg_usb_function *f = dev_get_drvdata(dev);
+	struct rndis_function_config *rndis = f->config;
+	return sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+		rndis->ethaddr[0], rndis->ethaddr[1], rndis->ethaddr[2],
+		rndis->ethaddr[3], rndis->ethaddr[4], rndis->ethaddr[5]);
+}
+
+static ssize_t rndis_ethaddr_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct ccg_usb_function *f = dev_get_drvdata(dev);
+	struct rndis_function_config *rndis = f->config;
+	unsigned char tmp[6];
+
+	if (sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+		   tmp + 0, tmp + 1, tmp + 2, tmp + 3, tmp + 4, tmp + 5) !=
+	    ETH_ALEN)
+		return -EINVAL;
+
+	memcpy(rndis->ethaddr, tmp, ETH_ALEN);
+
+	return ETH_ALEN;
+
+}
+
+static DEVICE_ATTR(ethaddr, S_IRUGO | S_IWUSR, rndis_ethaddr_show,
+					       rndis_ethaddr_store);
+
+static ssize_t rndis_vendorID_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct ccg_usb_function *f = dev_get_drvdata(dev);
+	struct rndis_function_config *config = f->config;
+	return sprintf(buf, "%04x\n", config->vendorID);
+}
+
+static ssize_t rndis_vendorID_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct ccg_usb_function *f = dev_get_drvdata(dev);
+	struct rndis_function_config *config = f->config;
+	int value;
+	int ret;
+
+	ret = kstrtou32(buf, 16, &value);
+	if (ret)
+		return ret;
+
+	config->vendorID = value;
+
+	return size;
+}
+
+static DEVICE_ATTR(vendorID, S_IRUGO | S_IWUSR, rndis_vendorID_show,
+						rndis_vendorID_store);
+
+static struct device_attribute *rndis_function_attributes[] = {
+	&dev_attr_manufacturer,
+	&dev_attr_wceis,
+	&dev_attr_ethaddr,
+	&dev_attr_vendorID,
+	NULL
+};
+
+static struct ccg_usb_function rndis_function = {
+	.name		= "rndis",
+	.init		= rndis_function_init,
+	.cleanup	= rndis_function_cleanup,
+	.bind_config	= rndis_function_bind_config,
+	.unbind_config	= rndis_function_unbind_config,
+	.attributes	= rndis_function_attributes,
+};
+
+static int mass_storage_function_init(struct ccg_usb_function *f,
+					struct usb_composite_dev *cdev)
+{
+	struct fsg_config fsg;
+	struct fsg_common *common;
+	int err;
+
+	memset(&fsg, 0, sizeof fsg);
+	fsg.nluns = 1;
+	fsg.luns[0].removable = 1;
+	fsg.vendor_name = iManufacturer;
+	fsg.product_name = iProduct;
+
+	common = fsg_common_init(NULL, cdev, &fsg);
+	if (IS_ERR(common))
+		return PTR_ERR(common);
+
+	err = sysfs_create_link(&f->dev->kobj,
+				&common->luns[0].dev.kobj,
+				"lun");
+	if (err) {
+		fsg_common_put(common);
+		return err;
+	}
+
+	f->config = common;
+	return 0;
+}
+
+static void mass_storage_function_cleanup(struct ccg_usb_function *f)
+{
+	fsg_common_put(f->config);
+	f->config = NULL;
+}
+
+static int mass_storage_function_bind_config(struct ccg_usb_function *f,
+					     struct usb_configuration *c)
+{
+	struct fsg_common *common = f->config;
+	return fsg_bind_config(c->cdev, c, common);
+}
+
+static struct ccg_usb_function mass_storage_function = {
+	.name		= "mass_storage",
+	.init		= mass_storage_function_init,
+	.cleanup	= mass_storage_function_cleanup,
+	.bind_config	= mass_storage_function_bind_config,
+};
+
+static struct ccg_usb_function *supported_functions[] = {
+	&functionfs_function,
+	&acm_function,
+	&rndis_function,
+	&mass_storage_function,
+	NULL
+};
+
+
+static int ccg_init_functions(struct ccg_usb_function **functions,
+				  struct usb_composite_dev *cdev)
+{
+	struct ccg_dev *dev = _ccg_dev;
+	struct ccg_usb_function *f;
+	struct device_attribute **attrs;
+	struct device_attribute *attr;
+	int err;
+	int index = 0;
+
+	for (; (f = *functions++); index++) {
+		f->dev_name = kasprintf(GFP_KERNEL, "f_%s", f->name);
+		if (!f->dev_name) {
+			pr_err("%s: Failed to alloc name %s", __func__,
+			       f->name);
+			err = -ENOMEM;
+			goto err_alloc;
+		}
+		f->dev = device_create(ccg_class, dev->dev,
+				MKDEV(0, index), f, f->dev_name);
+		if (IS_ERR(f->dev)) {
+			pr_err("%s: Failed to create dev %s", __func__,
+							f->dev_name);
+			err = PTR_ERR(f->dev);
+			f->dev = NULL;
+			goto err_create;
+		}
+
+		if (f->init) {
+			err = f->init(f, cdev);
+			if (err) {
+				pr_err("%s: Failed to init %s", __func__,
+								f->name);
+				goto err_out;
+			}
+		}
+
+		attrs = f->attributes;
+		if (attrs) {
+			while ((attr = *attrs++) && !err)
+				err = device_create_file(f->dev, attr);
+		}
+		if (err) {
+			pr_err("%s: Failed to create function %s attributes",
+					__func__, f->name);
+			goto err_uninit;
+		}
+	}
+	return 0;
+
+err_uninit:
+	if (f->cleanup)
+		f->cleanup(f);
+err_out:
+	device_destroy(ccg_class, f->dev->devt);
+	f->dev = NULL;
+err_create:
+	kfree(f->dev_name);
+err_alloc:
+	return err;
+}
+
+static void ccg_cleanup_functions(struct ccg_usb_function **functions)
+{
+	struct ccg_usb_function *f;
+
+	while (*functions) {
+		f = *functions++;
+
+		if (f->dev) {
+			if (f->cleanup)
+				f->cleanup(f);
+			device_destroy(ccg_class, f->dev->devt);
+			kfree(f->dev_name);
+		}
+	}
+}
+
+static int ccg_bind_enabled_functions(struct ccg_dev *dev,
+				      struct usb_configuration *c)
+{
+	struct ccg_usb_function *f;
+	int ret;
+
+	list_for_each_entry(f, &dev->enabled_functions, enabled_list) {
+		ret = f->bind_config(f, c);
+		if (ret) {
+			pr_err("%s: %s failed", __func__, f->name);
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static void ccg_unbind_enabled_functions(struct ccg_dev *dev,
+					 struct usb_configuration *c)
+{
+	struct ccg_usb_function *f;
+
+	list_for_each_entry(f, &dev->enabled_functions, enabled_list)
+		if (f->unbind_config)
+			f->unbind_config(f, c);
+}
+
+static int ccg_enable_function(struct ccg_dev *dev, char *name)
+{
+	struct ccg_usb_function **functions = dev->functions;
+	struct ccg_usb_function *f;
+	while ((f = *functions++)) {
+		if (!strcmp(name, f->name)) {
+			list_add_tail(&f->enabled_list,
+						&dev->enabled_functions);
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+/*-------------------------------------------------------------------------*/
+/* /sys/class/ccg_usb/ccg%d/ interface */
+
+static ssize_t
+functions_show(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+	struct ccg_dev *dev = dev_get_drvdata(pdev);
+	struct ccg_usb_function *f;
+	char *buff = buf;
+	int i;
+
+	mutex_lock(&dev->mutex);
+
+	list_for_each_entry(f, &dev->enabled_functions, enabled_list)
+		buff += sprintf(buff, "%s,", f->name);
+	for (i = 0; i < dev->max_func_num; i++)
+		if (dev->ffs_tab[i].used)
+			buff += sprintf(buff, "%s", dev->ffs_tab[i].name);
+
+	mutex_unlock(&dev->mutex);
+
+	if (buff != buf)
+		*(buff-1) = '\n';
+	return buff - buf;
+}
+
+static ssize_t
+functions_store(struct device *pdev, struct device_attribute *attr,
+			       const char *buff, size_t size)
+{
+	struct ccg_dev *dev = dev_get_drvdata(pdev);
+	char *name;
+	char buf[256], *b;
+	int err, i;
+	bool functionfs_enabled;
+
+	buff = skip_spaces(buff);
+	if (!*buff)
+		return -EINVAL;
+
+	mutex_lock(&dev->mutex);
+
+	if (dev->enabled) {
+		mutex_unlock(&dev->mutex);
+		return -EBUSY;
+	}
+
+	INIT_LIST_HEAD(&dev->enabled_functions);
+	functionfs_enabled = false;
+	for (i = 0; i < dev->max_func_num; i++)
+		dev->ffs_tab[i].used = false;
+
+	strlcpy(buf, buff, sizeof(buf));
+	b = strim(buf);
+
+	while (b) {
+		struct ffs_obj *user_func;
+
+		name = strsep(&b, ",");
+		/* handle FunctionFS implicitly */
+		if (!strcmp(name, functionfs_function.name)) {
+			pr_err("ccg_usb: Cannot explicitly enable '%s'", name);
+			continue;
+		}
+		user_func = functionfs_find_dev(dev, name);
+		if (user_func)
+			name = functionfs_function.name;
+		err = 0;
+		if (!user_func || !functionfs_enabled)
+			err = ccg_enable_function(dev, name);
+		if (err)
+			pr_err("ccg_usb: Cannot enable '%s'", name);
+		else if (user_func) {
+			user_func->used = true;
+			dev->func_num++;
+			functionfs_enabled = true;
+		}
+	}
+
+	mutex_unlock(&dev->mutex);
+
+	return size;
+}
+
+static ssize_t enable_show(struct device *pdev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct ccg_dev *dev = dev_get_drvdata(pdev);
+	return sprintf(buf, "%d\n", dev->enabled);
+}
+
+static ssize_t enable_store(struct device *pdev, struct device_attribute *attr,
+			    const char *buff, size_t size)
+{
+	struct ccg_dev *dev = dev_get_drvdata(pdev);
+	struct usb_composite_dev *cdev = dev->cdev;
+	int enabled = 0;
+
+	mutex_lock(&dev->mutex);
+	sscanf(buff, "%d", &enabled);
+	if (enabled && dev->func_num && !functionfs_all_ready(dev)) {
+		mutex_unlock(&dev->mutex);
+		return -ENODEV;
+	}
+
+	if (enabled && !dev->enabled) {
+		int ret;
+
+		cdev->next_string_id = 0;
+		/*
+		 * Update values in composite driver's copy of
+		 * device descriptor.
+		 */
+		cdev->desc.bDeviceClass = device_desc.bDeviceClass;
+		cdev->desc.bDeviceSubClass = device_desc.bDeviceSubClass;
+		cdev->desc.bDeviceProtocol = device_desc.bDeviceProtocol;
+		cdev->desc.idVendor = idVendor;
+		cdev->desc.idProduct = idProduct;
+		cdev->desc.bcdDevice = bcdDevice;
+
+		usb_add_config(cdev, &ccg_config_driver, ccg_bind_config);
+		dev->enabled = true;
+		ret = usb_gadget_connect(cdev->gadget);
+		if (ret) {
+			dev->enabled = false;
+			usb_remove_config(cdev, &ccg_config_driver);
+		}
+	} else if (!enabled && dev->enabled) {
+		reset_usb(dev);
+	} else {
+		pr_err("ccg_usb: already %s\n",
+			dev->enabled ? "enabled" : "disabled");
+	}
+
+	mutex_unlock(&dev->mutex);
+	return size;
+}
+
+static ssize_t state_show(struct device *pdev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct ccg_dev *dev = dev_get_drvdata(pdev);
+	struct usb_composite_dev *cdev = dev->cdev;
+	char *state = "DISCONNECTED";
+	unsigned long flags;
+
+	if (!cdev)
+		goto out;
+
+	spin_lock_irqsave(&cdev->lock, flags);
+	if (cdev->config)
+		state = "CONFIGURED";
+	else if (dev->connected)
+		state = "CONNECTED";
+	spin_unlock_irqrestore(&cdev->lock, flags);
+out:
+	return sprintf(buf, "%s\n", state);
+}
+
+#define DESCRIPTOR_ATTR(field, format_string)				\
+static ssize_t								\
+field ## _show(struct device *dev, struct device_attribute *attr,	\
+		char *buf)						\
+{									\
+	return sprintf(buf, format_string, device_desc.field);		\
+}									\
+static ssize_t								\
+field ## _store(struct device *dev, struct device_attribute *attr,	\
+		const char *buf, size_t size)				\
+{									\
+	int value;							\
+	if (sscanf(buf, format_string, &value) == 1) {			\
+		device_desc.field = value;				\
+		return size;						\
+	}								\
+	return -1;							\
+}									\
+static DEVICE_ATTR(field, S_IRUGO | S_IWUSR, field ## _show, field ## _store);
+
+DESCRIPTOR_ATTR(bDeviceClass, "%d\n")
+DESCRIPTOR_ATTR(bDeviceSubClass, "%d\n")
+DESCRIPTOR_ATTR(bDeviceProtocol, "%d\n")
+
+static DEVICE_ATTR(functions, S_IRUGO | S_IWUSR, functions_show,
+						 functions_store);
+static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, enable_show, enable_store);
+static DEVICE_ATTR(state, S_IRUGO, state_show, NULL);
+
+static struct device_attribute *ccg_usb_attributes[] = {
+	&dev_attr_bDeviceClass,
+	&dev_attr_bDeviceSubClass,
+	&dev_attr_bDeviceProtocol,
+	&dev_attr_functions,
+	&dev_attr_enable,
+	&dev_attr_state,
+	NULL
+};
+
+/*-------------------------------------------------------------------------*/
+/* Composite driver */
+
+static int ccg_bind_config(struct usb_configuration *c)
+{
+	struct ccg_dev *dev = _ccg_dev;
+	int ret = 0;
+
+	ret = ccg_bind_enabled_functions(dev, c);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void ccg_unbind_config(struct usb_configuration *c)
+{
+	struct ccg_dev *dev = _ccg_dev;
+
+	ccg_unbind_enabled_functions(dev, c);
+
+	usb_ep_autoconfig_reset(dev->cdev->gadget);
+}
+
+static int ccg_bind(struct usb_composite_dev *cdev)
+{
+	struct ccg_dev *dev = _ccg_dev;
+	struct usb_gadget	*gadget = cdev->gadget;
+	int			gcnum, ret;
+
+	/*
+	 * Start disconnected. Userspace will connect the gadget once
+	 * it is done configuring the functions.
+	 */
+	usb_gadget_disconnect(gadget);
+
+	ret = ccg_init_functions(dev->functions, cdev);
+	if (ret)
+		return ret;
+
+	gcnum = usb_gadget_controller_number(gadget);
+	if (gcnum >= 0)
+		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
+	else {
+		pr_warning("%s: controller '%s' not recognized\n",
+			longname, gadget->name);
+		device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
+	}
+
+	usb_gadget_set_selfpowered(gadget);
+	dev->cdev = cdev;
+
+	return 0;
+}
+
+static int ccg_usb_unbind(struct usb_composite_dev *cdev)
+{
+	struct ccg_dev *dev = _ccg_dev;
+
+	cancel_work_sync(&dev->work);
+	ccg_cleanup_functions(dev->functions);
+	return 0;
+}
+
+static struct usb_composite_driver ccg_usb_driver = {
+	.name		= "configurable_usb",
+	.dev		= &device_desc,
+	.unbind		= ccg_usb_unbind,
+	.needs_serial	= true,
+	.iManufacturer	= "Linux Foundation",
+	.iProduct	= longname,
+	.iSerialNumber	= "1234567890123456",
+};
+
+static int ccg_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *c)
+{
+	struct ccg_dev		*dev = _ccg_dev;
+	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
+	struct usb_request		*req = cdev->req;
+	struct ccg_usb_function	*f;
+	int value = -EOPNOTSUPP;
+	unsigned long flags;
+
+	req->zero = 0;
+	req->complete = composite_setup_complete;
+	req->length = 0;
+	gadget->ep0->driver_data = cdev;
+
+	list_for_each_entry(f, &dev->enabled_functions, enabled_list) {
+		if (f->ctrlrequest) {
+			value = f->ctrlrequest(f, cdev, c);
+			if (value >= 0)
+				break;
+		}
+	}
+
+	if (value < 0)
+		value = composite_setup(gadget, c);
+
+	spin_lock_irqsave(&cdev->lock, flags);
+	if (!dev->connected) {
+		dev->connected = 1;
+		schedule_work(&dev->work);
+	} else if (c->bRequest == USB_REQ_SET_CONFIGURATION &&
+						cdev->config) {
+		schedule_work(&dev->work);
+	}
+	spin_unlock_irqrestore(&cdev->lock, flags);
+
+	return value;
+}
+
+static void ccg_disconnect(struct usb_gadget *gadget)
+{
+	struct ccg_dev *dev = _ccg_dev;
+	struct usb_composite_dev *cdev = get_gadget_data(gadget);
+	unsigned long flags;
+
+	composite_disconnect(gadget);
+
+	spin_lock_irqsave(&cdev->lock, flags);
+	dev->connected = 0;
+	schedule_work(&dev->work);
+	spin_unlock_irqrestore(&cdev->lock, flags);
+}
+
+static int ccg_create_device(struct ccg_dev *dev)
+{
+	struct device_attribute **attrs = ccg_usb_attributes;
+	struct device_attribute *attr;
+	int err;
+
+	dev->dev = device_create(ccg_class, NULL, MKDEV(0, 0), NULL, "ccg0");
+	if (IS_ERR(dev->dev))
+		return PTR_ERR(dev->dev);
+
+	dev_set_drvdata(dev->dev, dev);
+
+	while ((attr = *attrs++)) {
+		err = device_create_file(dev->dev, attr);
+		if (err) {
+			device_destroy(ccg_class, dev->dev->devt);
+			return err;
+		}
+	}
+	return 0;
+}
+
+
+static int __init init(void)
+{
+	struct ccg_dev *dev;
+	int err;
+
+	ccg_class = class_create(THIS_MODULE, "ccg_usb");
+	if (IS_ERR(ccg_class))
+		return PTR_ERR(ccg_class);
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->functions = supported_functions;
+	INIT_LIST_HEAD(&dev->enabled_functions);
+	INIT_WORK(&dev->work, ccg_work);
+	mutex_init(&dev->mutex);
+
+	err = ccg_create_device(dev);
+	if (err) {
+		class_destroy(ccg_class);
+		kfree(dev);
+		return err;
+	}
+
+	_ccg_dev = dev;
+
+	/* Override composite driver functions */
+	composite_driver.setup = ccg_setup;
+	composite_driver.disconnect = ccg_disconnect;
+
+	err = usb_composite_probe(&ccg_usb_driver, ccg_bind);
+	if (err) {
+		class_destroy(ccg_class);
+		kfree(dev);
+	}
+
+	return err;
+}
+module_init(init);
+
+static void __exit cleanup(void)
+{
+	usb_composite_unregister(&ccg_usb_driver);
+	class_destroy(ccg_class);
+	kfree(_ccg_dev);
+	_ccg_dev = NULL;
+}
+module_exit(cleanup);
diff --git a/drivers/staging/ccg/sysfs-class-ccg_usb b/drivers/staging/ccg/sysfs-class-ccg_usb
new file mode 100644
index 000000000000..dd12a332fb00
--- /dev/null
+++ b/drivers/staging/ccg/sysfs-class-ccg_usb
@@ -0,0 +1,158 @@
+What:		/sys/class/ccg_usb
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		The ccg_usb/ class subdirectory belongs to ccg
+		USB gadget.
+
+What:		/sys/class/ccg_usb/ccgX
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		The /sys/class/ccg_usb/ccg{0,1,2,3...} class
+		subdirectories correspond to each ccg gadget device;
+		at the time of this writing there is only ccg0 and it
+		represents the ccg gadget.
+
+What:		/sys/class/ccg_usb/ccgX/functions
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		A comma-separated list of USB function names to be activated
+		in this ccg gadget. It includes both the functions provided
+		in-kernel by the ccg gadget and the functions provided from
+		userspace through FunctionFS.
+
+What:		/sys/class/ccg_usb/ccgX/enable
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		A flag activating/deactivating the ccg usb gadget.
+
+What:		/sys/class/ccg_usb/ccgX/state
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		Configurable usb gadget state:
+
+		DISCONNECTED
+		CONNECTED
+		CONFIGURED
+
+What:		/sys/class/ccg_usb/ccgX/f_acm/
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		The /sys/class/ccg_usb/ccgX/f_acm subdirectory
+		corresponds to the gadget's USB CDC serial (ACM) function
+		driver.
+
+What:		/sys/class/ccg_usb/ccgX/f_acm/instances
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		Maximum number of the /dev/ttyGS<X> interface the driver uses.
+
+What:		/sys/class/ccg_usb/ccgX/f_fs
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		The /sys/class/ccg_usb/ccgX/f_fs subdirectory
+		corresponds to the gadget's FunctionFS driver.
+
+What:		/sys/class/ccg_usb/ccgX/f_fs/user_functions
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		A comma-separeted list of USB function names to be supported
+		from userspace. No other userspace FunctionFS functions can
+		be supported than listed here. However, the actual activation
+		of these functions is still done through
+		/sys/class/ccg_usb/ccgX/functions, where it is possible
+		to specify any subset (including maximum and empty) of
+		/sys/class/ccg_usb/ccgX/f_fs/user_functions.
+
+What:		/sys/class/ccg_usb/ccgX/f_fs/max_user_functions
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		Maximum number of USB functions to be supported from userspace.
+
+What:		/sys/class/ccg_usb/ccgX/f_rndis
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		The /sys/class/ccg_usb/ccgX/f_rndis subdirectory
+		corresponds to the gadget's RNDIS driver.
+
+What:		/sys/class/ccg_usb/ccgX/f_rndis/manufacturer
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		RNDIS Ethernet port manufacturer string.
+
+What:		/sys/class/ccg_usb/ccgX/f_rndis/wceis
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		RNDIS Ethernet port wireless flag.
+
+What:		/sys/class/ccg_usb/ccgX/f_rndis/ethaddr
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		RNDIS Ethernet port Ethernet address.
+
+What:		/sys/class/ccg_usb/ccgX/f_rndis/vendorID
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		RNDIS Ethernet port vendor ID.
+
+What:		/sys/class/ccg_usb/ccgX/f_mass_storage
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		The /sys/class/ccg_usb/ccgX/f_mass_storage subdirectory
+		corresponds to the gadget's USB mass storage driver.
+
+What:		/sys/class/ccg_usb/ccgX/f_mass_storage/lun
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		The /sys/class/ccg_usb/ccgX/f_mass_storage/lun
+		subdirectory corresponds to the gadget's USB mass storage
+		driver and its underlying storage.
+
+What:		/sys/class/ccg_usb/ccgX/f_mass_storage/lun
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		The /sys/class/ccg_usb/ccgX/f_mass_storage/lun
+		subdirectory corresponds to the gadget's USB mass storage
+		driver and its underlying storage.
+
+What:		/sys/class/ccg_usb/ccgX/f_mass_storage/lun/file
+Date:		May 2012
+KernelVersion:	3.4
+Contact:	linux-usb@vger.kernel.org
+Description:
+		Gadget's USB mass storage underlying file.
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 12c691d90900..3bbe3fd103f3 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -1,6 +1,5 @@
 config COMEDI
 	tristate "Data acquisition support (comedi)"
-	default N
 	depends on m
 	depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
 	---help---
@@ -14,10 +13,29 @@ config COMEDI_DEBUG
 	  This is an option for use by developers; most people should
 	  say N here. This enables comedi core and driver debugging.
 
+config COMEDI_DEFAULT_BUF_SIZE_KB
+	int "Comedi default initial asynchronous buffer size in KiB"
+	default "2048"
+	depends on COMEDI != n
+	---help---
+	  This is the default asynchronous buffer size which is used for
+	  commands running in the background in kernel space.  This
+	  defaults to 2048 KiB of memory so that a 16 channel card
+	  running at 10 kHz has of 2-4 seconds of buffer.
+
+config COMEDI_DEFAULT_BUF_MAXSIZE_KB
+	int "Comedi default maximum asynchronous buffer size in KiB"
+	default "20480"
+	depends on COMEDI != n
+	---help---
+	  This is the default maximum asynchronous buffer size which can
+	  be requested by a userspace program without root privileges.
+	  This is set to 20480 KiB so that a fast I/O card with 16
+	  channels running at 100 kHz has 2-4 seconds of buffer.
+
 menuconfig COMEDI_MISC_DRIVERS
 	tristate "Comedi misc drivers"
 	depends on COMEDI
-	default N
 	---help---
 	  Enable comedi misc drivers to be built
 
@@ -35,7 +53,6 @@ config COMEDI_KCOMEDILIB
 config COMEDI_BOND
 	tristate "Device bonding support"
 	depends on COMEDI_KCOMEDILIB
-	default N
 	---help---
 	  Enable support for a driver to 'bond' (merge) multiple subdevices
 	  from multiple devices together as one.
@@ -46,7 +63,6 @@ config COMEDI_BOND
 config COMEDI_TEST
 	tristate "Fake waveform generator support"
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for the fake waveform generator.
 	  This driver is mainly for testing purposes, but can also be used to
@@ -58,7 +74,6 @@ config COMEDI_TEST
 
 config COMEDI_PARPORT
 	tristate "Parallel port support"
-	default N
 	---help---
 	  Enable support for the standard parallel port.
 	  A cheap and easy way to get a few more digital I/O lines. Steal
@@ -70,7 +85,6 @@ config COMEDI_PARPORT
 
 config COMEDI_SERIAL2002
 	tristate "Driver for serial connected hardware"
-	default N
 	---help---
 	  Enable support for serial connected hardware
 
@@ -79,7 +93,6 @@ config COMEDI_SERIAL2002
 
 config COMEDI_SKEL
 	tristate "Comedi skeleton driver"
-	default N
 	---help---
 	  Build the Skeleton driver, an example for driver writers
 
@@ -91,7 +104,6 @@ endif # COMEDI_MISC_DRIVERS
 menuconfig COMEDI_ISA_DRIVERS
 	tristate "Comedi ISA and PC/104 drivers"
 	depends on COMEDI && ISA
-	default N
 	---help---
 	  Enable comedi ISA and PC/104 drivers to be built
 
@@ -103,7 +115,6 @@ if COMEDI_ISA_DRIVERS && ISA
 
 config COMEDI_ACL7225B
 	tristate "ADlink NuDAQ ACL-7225b and compatibles support"
-	default N
 	---help---
 	  Enable support for ADlink NuDAQ ACL-7225b and compatibles,
 	  ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
@@ -113,7 +124,6 @@ config COMEDI_ACL7225B
 
 config COMEDI_PCL711
 	tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
-	default N
 	---help---
 	  Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
 
@@ -123,7 +133,6 @@ config COMEDI_PCL711
 config COMEDI_PCL724
 	tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for Advantech PCL-724, PCL-722, PCL-731 and
 	  ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
@@ -133,7 +142,6 @@ config COMEDI_PCL724
 
 config COMEDI_PCL725
 	tristate "Advantech PCL-725 and compatible ISA card support"
-	default N
 	---help---
 	  Enable support for Advantech PCL-725 and compatible ISA cards.
 
@@ -142,7 +150,6 @@ config COMEDI_PCL725
 
 config COMEDI_PCL726
 	tristate "Advantech PCL-726 and compatible ISA card support"
-	default N
 	---help---
 	  Enable support for Advantech PCL-726 and compatible ISA cards.
 
@@ -151,7 +158,6 @@ config COMEDI_PCL726
 
 config COMEDI_PCL730
 	tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
-	default N
 	---help---
 	  Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
 	  ACL-7130 ISA cards
@@ -162,7 +168,6 @@ config COMEDI_PCL730
 config COMEDI_PCL812
 	tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
 	  ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
@@ -174,7 +179,6 @@ config COMEDI_PCL812
 config COMEDI_PCL816
 	tristate "Advantech PCL-814 and PCL-816 ISA card support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for Advantech PCL-814 and PCL-816 ISA cards
 
@@ -184,7 +188,6 @@ config COMEDI_PCL816
 config COMEDI_PCL818
 	tristate "Advantech PCL-718 and PCL-818 ISA card support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for Advantech PCL-818 ISA cards
 	  PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
@@ -195,7 +198,6 @@ config COMEDI_PCL818
 config COMEDI_PCM3724
 	tristate "Advantech PCM-3724 PC/104 card support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for Advantech PCM-3724 PC/104 cards.
 
@@ -204,16 +206,43 @@ config COMEDI_PCM3724
 
 config COMEDI_PCM3730
 	tristate "Advantech PCM-3730 and clone PC/104 board support"
-	default N
 	---help---
 	  Enable support for Advantech PCM-3730 and clone PC/104 boards
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called pcm3730.
 
+config COMEDI_AMPLC_DIO200_ISA
+	tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
+	select COMEDI_AMPLC_DIO200
+	depends on COMEDI_ISA_DRIVERS
+	---help---
+	  Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
+	  PC272E ISA DIO boards
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called amplc_dio200.
+
+config COMEDI_AMPLC_PC236_ISA
+	tristate "Amplicon PC36AT DIO board support"
+	select COMEDI_AMPLC_PC236
+	---help---
+	  Enable support for Amplicon PC36AT ISA DIO board.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called amplc_pc236.
+
+config COMEDI_AMPLC_PC263_ISA
+	tristate "Amplicon PC263 relay board support"
+	select COMEDI_AMPLC_PC263
+	---help---
+	  Enable support for Amplicon PC263 ISA relay board.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called amplc_pc263.
+
 config COMEDI_RTI800
 	tristate "Analog Devices RTI-800/815 ISA card support"
-	default N
 	---help---
 	  Enable support for Analog Devices RTI-800/815 ISA cards
 
@@ -222,7 +251,6 @@ config COMEDI_RTI800
 
 config COMEDI_RTI802
 	tristate "Analog Devices RTI-802 ISA card support"
-	default N
 	---help---
 	  Enable support for Analog Devices RTI-802 ISA cards
 
@@ -233,18 +261,29 @@ config COMEDI_DAS16M1
 	tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
 	select COMEDI_8255
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called das16m1.
 
+config COMEDI_DAS08_ISA
+	tristate "DAS-08 compatible ISA and PC/104 card support"
+	select COMEDI_DAS08
+	---help---
+	  Enable support for Keithley Metrabyte/ComputerBoards DAS08
+	  and compatible ISA and PC/104 cards:
+	  Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
+	  DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
+	  DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called das08.
+
 config COMEDI_DAS16
 	tristate "DAS-16 compatible ISA and PC/104 card support"
 	select COMEDI_8255
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for Keithley Metrabyte/ComputerBoards DAS16
 	  and compatible ISA and PC/104 cards:
@@ -261,7 +300,6 @@ config COMEDI_DAS16
 config COMEDI_DAS800
 	tristate "DAS800 and compatible ISA card support"
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
 	  Keithley Metrabyte DAS-800, DAS-801, DAS-802
@@ -275,7 +313,6 @@ config COMEDI_DAS1800
 	tristate "DAS1800 and compatible ISA card support"
 	depends on VIRT_TO_BUS
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for DAS1800 and compatible ISA cards
 	  Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
@@ -289,7 +326,6 @@ config COMEDI_DAS1800
 
 config COMEDI_DAS6402
 	tristate "DAS6402 and compatible ISA card support"
-	default N
 	---help---
 	  Enable support for DAS6402 and compatible ISA cards
 	  Computerboards, Keithley Metrabyte DAS6402 and compatibles
@@ -299,7 +335,6 @@ config COMEDI_DAS6402
 
 config COMEDI_DT2801
 	tristate "Data Translation DT2801 ISA card support"
-	default N
 	---help---
 	  Enable support for Data Translation DT2801 ISA cards
 
@@ -308,7 +343,6 @@ config COMEDI_DT2801
 
 config COMEDI_DT2811
 	tristate "Data Translation DT2811 ISA card support"
-	default N
 	---help---
 	  Enable support for Data Translation DT2811 ISA cards
 
@@ -317,7 +351,6 @@ config COMEDI_DT2811
 
 config COMEDI_DT2814
 	tristate "Data Translation DT2814 ISA card support"
-	default N
 	---help---
 	  Enable support for Data Translation DT2814 ISA cards
 
@@ -326,7 +359,6 @@ config COMEDI_DT2814
 
 config COMEDI_DT2815
 	tristate "Data Translation DT2815 ISA card support"
-	default N
 	---help---
 	  Enable support for Data Translation DT2815 ISA cards
 
@@ -335,7 +367,6 @@ config COMEDI_DT2815
 
 config COMEDI_DT2817
 	tristate "Data Translation DT2817 ISA card support"
-	default N
 	---help---
 	  Enable support for Data Translation DT2817 ISA cards
 
@@ -346,7 +377,6 @@ config COMEDI_DT282X
 	tristate "Data Translation DT2821 series and DT-EZ ISA card support"
 	select COMEDI_FC
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for Data Translation DT2821 series including DT-EZ
 	  DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
@@ -358,7 +388,6 @@ config COMEDI_DT282X
 
 config COMEDI_DMM32AT
 	tristate "Diamond Systems MM-32-AT PC/104 board support"
-	default N
 	---help---
 	  Enable support for Diamond Systems MM-32-AT PC/104 boards
 
@@ -367,7 +396,6 @@ config COMEDI_DMM32AT
 
 config COMEDI_FL512
 	tristate "FL512 ISA card support"
-	default N
 	---help---
 	  Enable support for FL512 ISA card
 
@@ -377,7 +405,6 @@ config COMEDI_FL512
 config COMEDI_AIO_AIO12_8
 	tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
 
@@ -386,7 +413,6 @@ config COMEDI_AIO_AIO12_8
 
 config COMEDI_AIO_IIRO_16
 	tristate "I/O Products PC/104 IIRO16 Board support"
-	default N
 	---help---
 	  Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
 	  Input Board
@@ -396,7 +422,6 @@ config COMEDI_AIO_IIRO_16
 
 config COMEDI_C6XDIGIO
 	tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
-	default N
 	---help---
 	  Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
 	  card
@@ -406,7 +431,6 @@ config COMEDI_C6XDIGIO
 
 config COMEDI_MPC624
 	tristate "Micro/sys MPC-624 PC/104 board support"
-	default N
 	---help---
 	  Enable support for Micro/sys MPC-624 PC/104 board
 
@@ -415,7 +439,6 @@ config COMEDI_MPC624
 
 config COMEDI_ADQ12B
 	tristate "MicroAxial ADQ12-B data acquisition and control card support"
-	default N
 	---help---
 	  Enable MicroAxial ADQ12-B daq and control card support.
 
@@ -426,7 +449,6 @@ config COMEDI_NI_AT_A2150
 	tristate "NI AT-A2150 ISA card support"
 	depends on COMEDI_NI_COMMON
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for National Instruments AT-A2150 cards
 
@@ -436,7 +458,6 @@ config COMEDI_NI_AT_A2150
 config COMEDI_NI_AT_AO
 	tristate "NI AT-AO-6/10 EISA card support"
 	depends on COMEDI_NI_COMMON
-	default N
 	---help---
 	  Enable support for National Instruments AT-AO-6/10 cards
 
@@ -447,7 +468,6 @@ config COMEDI_NI_ATMIO
 	tristate "NI AT-MIO E series ISA-PNP card support"
 	depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for National Instruments AT-MIO E series cards
 	  National Instruments AT-MIO-16E-1 (ni_atmio),
@@ -461,7 +481,6 @@ config COMEDI_NI_ATMIO16D
 	tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
 	depends on ISAPNP && COMEDI_NI_COMMON
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
 
@@ -470,7 +489,6 @@ config COMEDI_NI_ATMIO16D
 
 config COMEDI_PCMAD
 	tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
-	default N
 	---help---
 	  Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
 
@@ -479,7 +497,6 @@ config COMEDI_PCMAD
 
 config COMEDI_PCMDA12
 	tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
-	default N
 	---help---
 	  Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
 	  Note that the board is not ISA-PNP capable and thus needs the I/O
@@ -490,7 +507,6 @@ config COMEDI_PCMDA12
 
 config COMEDI_PCMMIO
 	tristate "Winsystems PCM-MIO PC/104 board support"
-	default N
 	---help---
 	  Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
 
@@ -499,7 +515,6 @@ config COMEDI_PCMMIO
 
 config COMEDI_PCMUIO
 	tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
-	default N
 	---help---
 	  Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
 
@@ -508,7 +523,6 @@ config COMEDI_PCMUIO
 
 config COMEDI_MULTIQ3
 	tristate "Quanser Consulting MultiQ-3 ISA card support"
-	default N
 	---help---
 	  Enable support for Quanser Consulting MultiQ-3 ISA cards
 
@@ -517,7 +531,6 @@ config COMEDI_MULTIQ3
 
 config COMEDI_POC
 	tristate "Generic driver for very simple devices"
-	default N
 	---help---
 	  Enable generic support for very simple / POC (Piece of Crap) boards,
 	  Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
@@ -531,7 +544,6 @@ endif # COMEDI_ISA_DRIVERS
 menuconfig COMEDI_PCI_DRIVERS
 	tristate "Comedi PCI drivers"
 	depends on COMEDI && PCI
-	default N
 	---help---
 	  Enable comedi PCI drivers to be built
 
@@ -544,7 +556,6 @@ if COMEDI_PCI_DRIVERS && PCI
 config COMEDI_ADDI_APCI_035
 	tristate "ADDI-DATA APCI_035 support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_035 cards
 
@@ -554,7 +565,6 @@ config COMEDI_ADDI_APCI_035
 config COMEDI_ADDI_APCI_1032
 	tristate "ADDI-DATA APCI_1032 support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1032 cards
 
@@ -564,7 +574,6 @@ config COMEDI_ADDI_APCI_1032
 config COMEDI_ADDI_APCI_1500
 	tristate "ADDI-DATA APCI_1500 support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1500 cards
 
@@ -574,7 +583,6 @@ config COMEDI_ADDI_APCI_1500
 config COMEDI_ADDI_APCI_1516
 	tristate "ADDI-DATA APCI_1516 support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1516 cards
 
@@ -584,7 +592,6 @@ config COMEDI_ADDI_APCI_1516
 config COMEDI_ADDI_APCI_1564
 	tristate "ADDI-DATA APCI_1564 support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_1564 cards
 
@@ -594,7 +601,6 @@ config COMEDI_ADDI_APCI_1564
 config COMEDI_ADDI_APCI_16XX
 	tristate "ADDI-DATA APCI_16xx support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_16xx cards
 
@@ -604,7 +610,6 @@ config COMEDI_ADDI_APCI_16XX
 config COMEDI_ADDI_APCI_2016
 	tristate "ADDI-DATA APCI_2016 support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_2016 cards
 
@@ -614,7 +619,6 @@ config COMEDI_ADDI_APCI_2016
 config COMEDI_ADDI_APCI_2032
 	tristate "ADDI-DATA APCI_2032 support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_2032 cards
 
@@ -624,7 +628,6 @@ config COMEDI_ADDI_APCI_2032
 config COMEDI_ADDI_APCI_2200
 	tristate "ADDI-DATA APCI_2200 support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_2200 cards
 
@@ -635,7 +638,6 @@ config COMEDI_ADDI_APCI_3001
 	tristate "ADDI-DATA APCI_3001 support"
 	depends on VIRT_TO_BUS
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_3001 cards
 
@@ -646,7 +648,6 @@ config COMEDI_ADDI_APCI_3120
 	tristate "ADDI-DATA APCI_3520 support"
 	depends on VIRT_TO_BUS
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_3520 cards
 
@@ -656,7 +657,6 @@ config COMEDI_ADDI_APCI_3120
 config COMEDI_ADDI_APCI_3501
 	tristate "ADDI-DATA APCI_3501 support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_3501 cards
 
@@ -666,7 +666,6 @@ config COMEDI_ADDI_APCI_3501
 config COMEDI_ADDI_APCI_3XXX
 	tristate "ADDI-DATA APCI_3xxx support"
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADDI-DATA APCI_3xxx cards
 
@@ -676,7 +675,6 @@ config COMEDI_ADDI_APCI_3XXX
 config COMEDI_ADL_PCI6208
 	tristate "ADLink PCI-6208A support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for ADLink PCI-6208A cards
 
@@ -685,7 +683,6 @@ config COMEDI_ADL_PCI6208
 
 config COMEDI_ADL_PCI7230
 	tristate "ADLink PCI-7230 digital io board support"
-	default N
 	---help---
 	  Enable support for ADlink PCI-7230 digital io board support
 
@@ -694,7 +691,6 @@ config COMEDI_ADL_PCI7230
 
 config COMEDI_ADL_PCI7296
 	tristate "ADLink PCI-7296 96 ch. digital io board support"
-	default N
 	---help---
 	  Enable support for ADlink PCI-7296 96 ch. digital io board support
 
@@ -703,7 +699,6 @@ config COMEDI_ADL_PCI7296
 
 config COMEDI_ADL_PCI7432
 	tristate "ADLink PCI-7432 64 ch. isolated digital io board support"
-	default N
 	---help---
 	  Enable support for ADlink PCI-7432 64 ch. isolated digital io board
 
@@ -712,7 +707,6 @@ config COMEDI_ADL_PCI7432
 
 config COMEDI_ADL_PCI8164
 	tristate "ADLink PCI-8164 4 Axes Motion Control board support"
-	default N
 	---help---
 	  Enable support for ADlink PCI-8164 4 Axes Motion Control board
 
@@ -722,7 +716,6 @@ config COMEDI_ADL_PCI8164
 config COMEDI_ADL_PCI9111
 	tristate "ADLink PCI-9111HR support"
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for ADlink PCI9111 cards
 
@@ -733,7 +726,6 @@ config COMEDI_ADL_PCI9118
 	tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
 	select COMEDI_FC
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
 
@@ -742,7 +734,6 @@ config COMEDI_ADL_PCI9118
 
 config COMEDI_ADV_PCI1710
 	tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
-	default N
 	---help---
 	  Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
 	  PCI-1713, PCI-1720 and PCI-1731
@@ -752,7 +743,6 @@ config COMEDI_ADV_PCI1710
 
 config COMEDI_ADV_PCI1723
 	tristate "Advantech PCI-1723 support"
-	default N
 	---help---
 	  Enable support for Advantech PCI-1723 cards
 
@@ -762,7 +752,6 @@ config COMEDI_ADV_PCI1723
 config COMEDI_ADV_PCI_DIO
 	tristate "Advantech PCI DIO card support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for Advantech PCI DIO cards
 	  PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
@@ -772,31 +761,29 @@ config COMEDI_ADV_PCI_DIO
 	  To compile this driver as a module, choose M here: the module will be
 	  called adv_pci_dio.
 
-config COMEDI_AMPLC_DIO200
-	tristate "Amplicon PC272E and PCI272 DIO board support"
-	select COMEDI_8255
-	default N
+config COMEDI_AMPLC_DIO200_PCI
+	tristate "Amplicon PCI215 and PCI272 DIO board support"
+	select COMEDI_AMPLC_DIO200
 	---help---
-	  Enable support for Amplicon PC272E and PCI272 DIO boards
+	  Enable support for Amplicon PCI215 and PCI272 DIO boards.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called amplc_dio200.
 
-config COMEDI_AMPLC_PC236
-	tristate "Amplicon PC36AT and PCI236 DIO board support"
-	select COMEDI_8255
-	default N
+config COMEDI_AMPLC_PC236_PCI
+	tristate "Amplicon PCI236 DIO board support"
+	select COMEDI_AMPLC_PC236
 	---help---
-	  Enable support for Amplicon PC36AT and PCI236 DIO boards
+	  Enable support for Amplicon PCI236 DIO board.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called amplc_pc236.
 
-config COMEDI_AMPLC_PC263
-	tristate "Amplicon PC263 and PCI263 relay board support"
-	default N
+config COMEDI_AMPLC_PC263_PCI
+	tristate "Amplicon PCI263 relay board support"
+	select COMEDI_AMPLC_PC263
 	---help---
-	  Enable support for Amplicon PC263 and PCI263 relay boards
+	  Enable support for Amplicon PCI263 relay board.
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called amplc_pc263.
@@ -804,7 +791,6 @@ config COMEDI_AMPLC_PC263
 config COMEDI_AMPLC_PCI224
 	tristate "Amplicon PCI224 and PCI234 support"
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for Amplicon PCI224 and PCI234 AO boards
 
@@ -814,7 +800,6 @@ config COMEDI_AMPLC_PCI224
 config COMEDI_AMPLC_PCI230
 	tristate "Amplicon PCI230 and PCI260 support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
 	  boards
@@ -824,16 +809,23 @@ config COMEDI_AMPLC_PCI230
 
 config COMEDI_CONTEC_PCI_DIO
 	tristate "Contec PIO1616L digital I/O board support"
-	default N
 	---help---
 	  Enable support for the Contec PIO1616L digital I/O board
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called contec_pci_dio.
 
+config COMEDI_DAS08_PCI
+	tristate "DAS-08 PCI support"
+	select COMEDI_DAS08
+	---help---
+	  Enable support for PCI DAS-08 cards.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called das08.
+
 config COMEDI_DT3000
 	tristate "Data Translation DT3000 series support"
-	default N
 	---help---
 	  Enable support for Data Translation DT3000 series
 	  DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
@@ -844,7 +836,6 @@ config COMEDI_DT3000
 
 config COMEDI_DYNA_PCI10XX
 	tristate "Dynalog PCI DAQ series support"
-	default N
 	---help---
 	  Enable support for Dynalog PCI DAQ series
 	  PCI-1050
@@ -854,7 +845,6 @@ config COMEDI_DYNA_PCI10XX
 
 config COMEDI_UNIOXX5
 	tristate "Fastwel UNIOxx-5 analog and digital io board support"
-	default N
 	---help---
 	  Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
 
@@ -864,7 +854,6 @@ config COMEDI_UNIOXX5
 config COMEDI_GSC_HPDI
 	tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for General Standards Corporation high speed parallel
 	  digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
@@ -875,7 +864,6 @@ config COMEDI_GSC_HPDI
 
 config COMEDI_ICP_MULTI
 	tristate "Inova ICP_MULTI support"
-	default N
 	---help---
 	  Enable support for Inova ICP_MULTI card
 
@@ -884,7 +872,6 @@ config COMEDI_ICP_MULTI
 
 config COMEDI_II_PCI20KC
 	tristate "Intelligent Instruments PCI-20001C carrier support"
-	default N
 	---help---
 	  Enable support for Intelligent Instruments PCI-20001C carrier
 	  PCI-20001, PCI-20006 and PCI-20341
@@ -895,7 +882,6 @@ config COMEDI_II_PCI20KC
 config COMEDI_DAQBOARD2000
 	tristate "IOtech DAQboard/2000 support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for the IOtech DAQboard/2000
 
@@ -904,7 +890,6 @@ config COMEDI_DAQBOARD2000
 
 config COMEDI_JR3_PCI
 	tristate "JR3/PCI force sensor board support"
-	default N
 	---help---
 	  Enable support for JR3/PCI force sensor boards
 
@@ -913,7 +898,6 @@ config COMEDI_JR3_PCI
 
 config COMEDI_KE_COUNTER
 	tristate "Kolter-Electronic PCI Counter 1 card support"
-	default N
 	---help---
 	  Enable support for Kolter-Electronic PCI Counter 1 cards
 
@@ -924,7 +908,6 @@ config COMEDI_CB_PCIDAS64
 	tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
 	select COMEDI_8255
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
 	  60xx, and 4020 series with the PLX 9080 PCI controller
@@ -936,7 +919,6 @@ config COMEDI_CB_PCIDAS
 	tristate "MeasurementComputing PCI-DAS support"
 	select COMEDI_8255
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
 	  AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
@@ -949,7 +931,6 @@ config COMEDI_CB_PCIDAS
 config COMEDI_CB_PCIDDA
 	tristate "MeasurementComputing PCI-DDA series support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DDA
 	  series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
@@ -961,7 +942,6 @@ config COMEDI_CB_PCIDDA
 config COMEDI_CB_PCIDIO
 	tristate "MeasurementComputing PCI-DIO series support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
 	  PCI-DIO24, PCI-DIO24H and PCI-DIO48H
@@ -972,7 +952,6 @@ config COMEDI_CB_PCIDIO
 config COMEDI_CB_PCIMDAS
 	tristate "MeasurementComputing PCIM-DAS1602/16 support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCI Migration
 	  series PCIM-DAS1602/16
@@ -983,7 +962,6 @@ config COMEDI_CB_PCIMDAS
 config COMEDI_CB_PCIMDDA
 	tristate "MeasurementComputing PCIM-DDA06-16 support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
 
@@ -992,7 +970,6 @@ config COMEDI_CB_PCIMDDA
 
 config COMEDI_ME4000
 	tristate "Meilhaus ME-4000 support"
-	default N
 	---help---
 	  Enable support for Meilhaus PCI data acquisition cards
 	  ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
@@ -1002,7 +979,6 @@ config COMEDI_ME4000
 
 config COMEDI_ME_DAQ
 	tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
-	default N
 	---help---
 	  Enable support for Meilhaus PCI data acquisition cards
 	  ME-2000i, ME-2600i and ME-3000vm1
@@ -1013,7 +989,6 @@ config COMEDI_ME_DAQ
 config COMEDI_NI_6527
 	tristate "NI 6527 support"
 	depends on COMEDI_MITE
-	default N
 	---help---
 	  Enable support for the National Instruments 6527 PCI card
 
@@ -1023,7 +998,6 @@ config COMEDI_NI_6527
 config COMEDI_NI_65XX
 	tristate "NI 65xx static dio PCI card support"
 	depends on COMEDI_MITE
-	default N
 	---help---
 	  Enable support for National Instruments 65xx static dio boards.
 	  Supported devices: National Instruments PCI-6509 (ni_65xx),
@@ -1037,7 +1011,6 @@ config COMEDI_NI_65XX
 config COMEDI_NI_660X
 	tristate "NI 660x counter/timer PCI card support"
 	depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
-	default N
 	---help---
 	  Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
 	  PXI-6602 and PXI-6608.
@@ -1048,7 +1021,6 @@ config COMEDI_NI_660X
 config COMEDI_NI_670X
 	tristate "NI 670x PCI card support"
 	depends on COMEDI_MITE
-	default N
 	---help---
 	  Enable support for National Instruments PCI-6703 and PCI-6704
 
@@ -1059,7 +1031,6 @@ config COMEDI_NI_PCIDIO
 	tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
 	depends on COMEDI_MITE
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
 	  PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X,
@@ -1075,7 +1046,6 @@ config COMEDI_NI_PCIMIO
 	depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
 	select COMEDI_8255
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for National Instruments PCI-MIO-E series and M series
 	  (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
@@ -1094,7 +1064,6 @@ config COMEDI_NI_PCIMIO
 config COMEDI_RTD520
 	tristate "Real Time Devices PCI4520/DM7520 support"
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for Real Time Devices PCI4520/DM7520
 
@@ -1103,7 +1072,6 @@ config COMEDI_RTD520
 
 config COMEDI_S526
 	tristate "Sensoray s526 support"
-	default N
 	---help---
 	  Enable support for Sensoray s526
 
@@ -1113,7 +1081,6 @@ config COMEDI_S526
 config COMEDI_S626
 	tristate "Sensoray 626 support"
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for Sensoray 626
 
@@ -1122,7 +1089,6 @@ config COMEDI_S626
 
 config COMEDI_SSV_DNP
 	tristate "SSV Embedded Systems DIL/Net-PC support"
-	default N
 	---help---
 	  Enable support for SSV Embedded Systems DIL/Net-PC
 
@@ -1134,7 +1100,6 @@ endif # COMEDI_PCI_DRIVERS
 menuconfig COMEDI_PCMCIA_DRIVERS
 	tristate "Comedi PCMCIA drivers"
 	depends on COMEDI && (PCMCIA || PCCARD)
-	default N
 	---help---
 	  Enable comedi PCMCIA and PCCARD drivers to be built
 
@@ -1146,7 +1111,6 @@ if COMEDI_PCMCIA_DRIVERS && PCMCIA
 
 config COMEDI_CB_DAS16_CS
 	tristate "CB DAS16 series PCMCIA support"
-	default N
 	---help---
 	  Enable support for the ComputerBoards/MeasurementComputing PCMCIA
 	  cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
@@ -1157,7 +1121,6 @@ config COMEDI_CB_DAS16_CS
 config COMEDI_DAS08_CS
 	tristate "CB DAS08 PCMCIA support"
 	select COMEDI_DAS08
-	default N
 	---help---
 	  Enable support for the ComputerBoards/MeasurementComputing DAS-08
 	  PCMCIA card
@@ -1168,7 +1131,6 @@ config COMEDI_DAS08_CS
 config COMEDI_NI_DAQ_700_CS
 	tristate "NI DAQCard-700 PCMCIA support"
 	depends on COMEDI_NI_COMMON
-	default N
 	---help---
 	  Enable support for the National Instruments PCMCIA DAQCard-700 DIO
 
@@ -1179,7 +1141,6 @@ config COMEDI_NI_DAQ_DIO24_CS
 	tristate "NI DAQ-Card DIO-24 PCMCIA support"
 	depends on COMEDI_NI_COMMON
 	select COMEDI_8255
-	default N
 	---help---
 	  Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
 
@@ -1189,7 +1150,6 @@ config COMEDI_NI_DAQ_DIO24_CS
 config COMEDI_NI_LABPC_CS
 	tristate "NI DAQCard-1200 PCMCIA support"
 	depends on COMEDI_NI_LABPC
-	default N
 	---help---
 	  Enable support for the National Instruments PCMCIA DAQCard-1200
 
@@ -1201,7 +1161,6 @@ config COMEDI_NI_MIO_CS
 	depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
 	select COMEDI_8255
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for the National Instruments PCMCIA DAQCard E series
 	  DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
@@ -1212,7 +1171,6 @@ config COMEDI_NI_MIO_CS
 
 config COMEDI_QUATECH_DAQP_CS
 	tristate "Quatech DAQP PCMCIA data capture card support"
-	default N
 	---help---
 	  Enable support for the Quatech DAQP PCMCIA data capture cards
 	  DAQP-208 and DAQP-308
@@ -1225,7 +1183,6 @@ endif # COMEDI_PCMCIA_DRIVERS
 menuconfig COMEDI_USB_DRIVERS
 	tristate "Comedi USB drivers"
 	depends on COMEDI && USB
-	default N
 	---help---
 	  Enable comedi USB drivers to be built
 
@@ -1237,7 +1194,6 @@ if COMEDI_USB_DRIVERS && USB
 
 config COMEDI_DT9812
 	tristate "DataTranslation DT9812 USB module support"
-	default N
 	---help---
 	  Enable support for the Data Translation DT9812 USB module
 
@@ -1246,7 +1202,6 @@ config COMEDI_DT9812
 
 config COMEDI_USBDUX
 	tristate "ITL USB-DUX-D support"
-	default N
 	---help---
 	  Enable support for the Incite Technology Ltd USB-DUX-D Board
 
@@ -1256,7 +1211,6 @@ config COMEDI_USBDUX
 config COMEDI_USBDUXFAST
 	tristate "ITL USB-DUXfast support"
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for the Incite Technology Ltd USB-DUXfast Board
 
@@ -1266,7 +1220,6 @@ config COMEDI_USBDUXFAST
 config COMEDI_USBDUXSIGMA
 	tristate "ITL USB-DUXsigma support"
 	select COMEDI_FC
-	default N
 	---help---
 	  Enable support for the Incite Technology Ltd USB-DUXsigma Board
 
@@ -1275,7 +1228,6 @@ config COMEDI_USBDUXSIGMA
 
 config COMEDI_VMK80XX
 	tristate "Velleman VM110/VM140 USB Board support"
-	default N
 	---help---
 	  Build the Velleman USB Board Low-Level Driver supporting the
 	  K8055/K8061 aka VM110/VM140 devices
@@ -1288,7 +1240,6 @@ endif # COMEDI_USB_DRIVERS
 menuconfig COMEDI_NI_COMMON
 	tristate "Comedi National Instruments card support"
 	depends on COMEDI
-	default N
 	---help---
 	  Enable comedi support for National Instruments cards.
 	  Modules in this section are used by many comedi NI drivers.
@@ -1302,7 +1253,6 @@ if COMEDI_NI_COMMON
 config COMEDI_MITE
 	tristate "NI Mite PCI interface chip support"
 	depends on PCI
-	default N
 	---help---
 	  Enable support for National Instruments Mite PCI interface chip
 
@@ -1312,7 +1262,6 @@ config COMEDI_MITE
 config COMEDI_NI_TIO
 	tristate "NI general purpose counter support"
 	depends on COMEDI_MITE
-	default N
 	---help---
 	  Enable support for National Instruments general purpose counters.
 	  This module is not used directly by end-users. Rather, it
@@ -1328,7 +1277,6 @@ config COMEDI_NI_LABPC
 	select COMEDI_8255
 	select COMEDI_FC
 	depends on VIRT_TO_BUS
-	default N
 	---help---
 	  Enable support for National Instruments Lab-PC and compatibles
 	  Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
@@ -1343,7 +1291,6 @@ endif # COMEDI_NI_COMMON
 config COMEDI_8255
 	tristate "Generic 8255 support"
 	depends on COMEDI
-	default N
 	---help---
 	  Enable generic 8255 support.
 
@@ -1357,24 +1304,9 @@ config COMEDI_8255
 	  To compile this driver as a module, choose M here: the module will be
 	  called 8255.
 
-config COMEDI_DAS08
-	tristate "DAS-08 compatible support"
-	depends on COMEDI
-	select COMEDI_8255
-	default N
-	---help---
-	  Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
-
-	  Note that PCMCIA DAS08 cards are not directly supported by this
-	  driver, and need a separate driver as a wrapper.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called das08.
-
 config COMEDI_FC
 	tristate "Comedi shared functions for low-level driver support"
 	depends on COMEDI
-	default N
 	---help---
 	  Enable support for shared functions for low-level drivers.
 	  This module is not used directly by end-users. Rather, it
@@ -1382,3 +1314,22 @@ config COMEDI_FC
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called comedi_fc.
+
+config COMEDI_AMPLC_DIO200
+	tristate
+	depends on COMEDI
+	select COMEDI_8255
+
+config COMEDI_AMPLC_PC236
+	tristate
+	depends on COMEDI
+	select COMEDI_8255
+
+config COMEDI_AMPLC_PC263
+	tristate
+	depends on COMEDI
+
+config COMEDI_DAS08
+	tristate
+	depends on COMEDI
+	select COMEDI_8255
diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h
index 14ea35ac0156..8ea55aef10a7 100644
--- a/drivers/staging/comedi/comedi.h
+++ b/drivers/staging/comedi/comedi.h
@@ -465,7 +465,7 @@
 /* only relevant to kernel modules. */
 
 #define COMEDI_CB_EOS		1	/* end of scan */
-#define COMEDI_CB_EOA		2	/* end of acquisition */
+#define COMEDI_CB_EOA		2	/* end of acquisition/output */
 #define COMEDI_CB_BLOCK		4	/* data has arrived:
 					 * wakes up read() / write() */
 #define COMEDI_CB_EOBUF		8	/* DEPRECATED: end of buffer */
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 9bcf87ae4c00..76776571ed91 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -58,14 +58,35 @@ MODULE_LICENSE("GPL");
 #ifdef CONFIG_COMEDI_DEBUG
 int comedi_debug;
 EXPORT_SYMBOL(comedi_debug);
-module_param(comedi_debug, int, 0644);
+module_param(comedi_debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(comedi_debug,
+		 "enable comedi core and driver debugging if non-zero (default 0)"
+		);
 #endif
 
 bool comedi_autoconfig = 1;
-module_param(comedi_autoconfig, bool, 0444);
+module_param(comedi_autoconfig, bool, S_IRUGO);
+MODULE_PARM_DESC(comedi_autoconfig,
+		 "enable drivers to auto-configure comedi devices (default 1)");
 
 static int comedi_num_legacy_minors;
-module_param(comedi_num_legacy_minors, int, 0444);
+module_param(comedi_num_legacy_minors, int, S_IRUGO);
+MODULE_PARM_DESC(comedi_num_legacy_minors,
+		 "number of comedi minor devices to reserve for non-auto-configured devices (default 0)"
+		);
+
+unsigned int comedi_default_buf_size_kb = CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB;
+module_param(comedi_default_buf_size_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(comedi_default_buf_size_kb,
+		 "default asynchronous buffer size in KiB (default "
+		 __MODULE_STRING(CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB) ")");
+
+unsigned int comedi_default_buf_maxsize_kb
+	= CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB;
+module_param(comedi_default_buf_maxsize_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(comedi_default_buf_maxsize_kb,
+		 "default maximum size of asynchronous buffer in KiB (default "
+		 __MODULE_STRING(CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB) ")");
 
 static DEFINE_SPINLOCK(comedi_file_info_table_lock);
 static struct comedi_device_file_info
@@ -108,15 +129,283 @@ static int do_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 static int comedi_fasync(int fd, struct file *file, int on);
 
 static int is_device_busy(struct comedi_device *dev);
+
 static int resize_async_buffer(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_async *async, unsigned new_size);
+			       struct comedi_async *async, unsigned new_size)
+{
+	int retval;
+
+	if (new_size > async->max_bufsize)
+		return -EPERM;
+
+	if (s->busy) {
+		DPRINTK("subdevice is busy, cannot resize buffer\n");
+		return -EBUSY;
+	}
+	if (async->mmap_count) {
+		DPRINTK("subdevice is mmapped, cannot resize buffer\n");
+		return -EBUSY;
+	}
+
+	if (!async->prealloc_buf)
+		return -EINVAL;
+
+	/* make sure buffer is an integral number of pages
+	 * (we round up) */
+	new_size = (new_size + PAGE_SIZE - 1) & PAGE_MASK;
+
+	retval = comedi_buf_alloc(dev, s, new_size);
+	if (retval < 0)
+		return retval;
+
+	if (s->buf_change) {
+		retval = s->buf_change(dev, s, new_size);
+		if (retval < 0)
+			return retval;
+	}
+
+	DPRINTK("comedi%i subd %d buffer resized to %i bytes\n",
+		dev->minor, (int)(s - dev->subdevices), async->prealloc_bufsz);
+	return 0;
+}
+
+/* sysfs attribute files */
+
+static const unsigned bytes_per_kibi = 1024;
+
+static ssize_t show_max_read_buffer_kb(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned max_buffer_size_kb = 0;
+	struct comedi_subdevice *const read_subdevice =
+	    comedi_get_read_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice &&
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) &&
+	    read_subdevice->async) {
+		max_buffer_size_kb = read_subdevice->async->max_bufsize /
+		    bytes_per_kibi;
+	}
+	retval = snprintf(buf, PAGE_SIZE, "%i\n", max_buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_max_read_buffer_kb(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned int new_max_size_kb;
+	unsigned int new_max_size;
+	int ret;
+	struct comedi_subdevice *const read_subdevice =
+	    comedi_get_read_subdevice(info);
+
+	ret = kstrtouint(buf, 10, &new_max_size_kb);
+	if (ret)
+		return ret;
+	if (new_max_size_kb > (UINT_MAX / bytes_per_kibi))
+		return -EINVAL;
+	new_max_size = new_max_size_kb * bytes_per_kibi;
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice == NULL ||
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) == 0 ||
+	    read_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	read_subdevice->async->max_bufsize = new_max_size;
+	mutex_unlock(&info->device->mutex);
+
+	return count;
+}
+
+static ssize_t show_read_buffer_kb(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned buffer_size_kb = 0;
+	struct comedi_subdevice *const read_subdevice =
+	    comedi_get_read_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice &&
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) &&
+	    read_subdevice->async) {
+		buffer_size_kb = read_subdevice->async->prealloc_bufsz /
+		    bytes_per_kibi;
+	}
+	retval = snprintf(buf, PAGE_SIZE, "%i\n", buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_read_buffer_kb(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned int new_size_kb;
+	unsigned int new_size;
+	int retval;
+	int ret;
+	struct comedi_subdevice *const read_subdevice =
+	    comedi_get_read_subdevice(info);
+
+	ret = kstrtouint(buf, 10, &new_size_kb);
+	if (ret)
+		return ret;
+	if (new_size_kb > (UINT_MAX / bytes_per_kibi))
+		return -EINVAL;
+	new_size = new_size_kb * bytes_per_kibi;
+
+	mutex_lock(&info->device->mutex);
+	if (read_subdevice == NULL ||
+	    (read_subdevice->subdev_flags & SDF_CMD_READ) == 0 ||
+	    read_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	retval = resize_async_buffer(info->device, read_subdevice,
+				     read_subdevice->async, new_size);
+	mutex_unlock(&info->device->mutex);
+
+	if (retval < 0)
+		return retval;
+	return count;
+}
+
+static ssize_t show_max_write_buffer_kb(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned max_buffer_size_kb = 0;
+	struct comedi_subdevice *const write_subdevice =
+	    comedi_get_write_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice &&
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) &&
+	    write_subdevice->async) {
+		max_buffer_size_kb = write_subdevice->async->max_bufsize /
+		    bytes_per_kibi;
+	}
+	retval = snprintf(buf, PAGE_SIZE, "%i\n", max_buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
+
+	return retval;
+}
+
+static ssize_t store_max_write_buffer_kb(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned int new_max_size_kb;
+	unsigned int new_max_size;
+	int ret;
+	struct comedi_subdevice *const write_subdevice =
+	    comedi_get_write_subdevice(info);
+
+	ret = kstrtouint(buf, 10, &new_max_size_kb);
+	if (ret)
+		return ret;
+	if (new_max_size_kb > (UINT_MAX / bytes_per_kibi))
+		return -EINVAL;
+	new_max_size = new_max_size_kb * bytes_per_kibi;
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice == NULL ||
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) == 0 ||
+	    write_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	write_subdevice->async->max_bufsize = new_max_size;
+	mutex_unlock(&info->device->mutex);
+
+	return count;
+}
+
+static ssize_t show_write_buffer_kb(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	ssize_t retval;
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned buffer_size_kb = 0;
+	struct comedi_subdevice *const write_subdevice =
+	    comedi_get_write_subdevice(info);
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice &&
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) &&
+	    write_subdevice->async) {
+		buffer_size_kb = write_subdevice->async->prealloc_bufsz /
+		    bytes_per_kibi;
+	}
+	retval = snprintf(buf, PAGE_SIZE, "%i\n", buffer_size_kb);
+	mutex_unlock(&info->device->mutex);
 
-/* declarations for sysfs attribute files */
-static struct device_attribute dev_attr_max_read_buffer_kb;
-static struct device_attribute dev_attr_read_buffer_kb;
-static struct device_attribute dev_attr_max_write_buffer_kb;
-static struct device_attribute dev_attr_write_buffer_kb;
+	return retval;
+}
+
+static ssize_t store_write_buffer_kb(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct comedi_device_file_info *info = dev_get_drvdata(dev);
+	unsigned int new_size_kb;
+	unsigned int new_size;
+	int retval;
+	int ret;
+	struct comedi_subdevice *const write_subdevice =
+	    comedi_get_write_subdevice(info);
+
+	ret = kstrtouint(buf, 10, &new_size_kb);
+	if (ret)
+		return ret;
+	if (new_size_kb > (UINT_MAX / bytes_per_kibi))
+		return -EINVAL;
+	new_size = ((uint64_t) new_size_kb) * bytes_per_kibi;
+
+	mutex_lock(&info->device->mutex);
+	if (write_subdevice == NULL ||
+	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) == 0 ||
+	    write_subdevice->async == NULL) {
+		mutex_unlock(&info->device->mutex);
+		return -EINVAL;
+	}
+	retval = resize_async_buffer(info->device, write_subdevice,
+				     write_subdevice->async, new_size);
+	mutex_unlock(&info->device->mutex);
+
+	if (retval < 0)
+		return retval;
+	return count;
+}
+
+static struct device_attribute comedi_dev_attrs[] = {
+	__ATTR(max_read_buffer_kb, S_IRUGO | S_IWUSR,
+		show_max_read_buffer_kb, store_max_read_buffer_kb),
+	__ATTR(read_buffer_kb, S_IRUGO | S_IWUSR | S_IWGRP,
+		show_read_buffer_kb, store_read_buffer_kb),
+	__ATTR(max_write_buffer_kb, S_IRUGO | S_IWUSR,
+		show_max_write_buffer_kb, store_max_write_buffer_kb),
+	__ATTR(write_buffer_kb, S_IRUGO | S_IWUSR | S_IWGRP,
+		show_write_buffer_kb, store_write_buffer_kb),
+	__ATTR_NULL
+};
 
 static long comedi_unlocked_ioctl(struct file *file, unsigned int cmd,
 				  unsigned long arg)
@@ -280,7 +569,7 @@ static int do_devconfig_ioctl(struct comedi_device *dev,
 	if (ret == 0) {
 		if (!try_module_get(dev->driver->module)) {
 			comedi_device_detach(dev);
-			return -ENOSYS;
+			ret = -ENOSYS;
 		}
 	}
 
@@ -1545,7 +1834,7 @@ done:
 	return retval;
 }
 
-static unsigned int comedi_poll(struct file *file, poll_table * wait)
+static unsigned int comedi_poll(struct file *file, poll_table *wait)
 {
 	unsigned int mask = 0;
 	const unsigned minor = iminor(file->f_dentry->d_inode);
@@ -2054,6 +2343,8 @@ static int __init comedi_init(void)
 		return PTR_ERR(comedi_class);
 	}
 
+	comedi_class->dev_attrs = comedi_dev_attrs;
+
 	/* XXX requires /proc interface */
 	comedi_proc_init();
 
@@ -2192,11 +2483,9 @@ static void comedi_device_cleanup(struct comedi_device *dev)
 
 int comedi_alloc_board_minor(struct device *hardware_device)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 	struct device *csdev;
 	unsigned i;
-	int retval;
 
 	info = kzalloc(sizeof(struct comedi_device_file_info), GFP_KERNEL);
 	if (info == NULL)
@@ -2206,15 +2495,16 @@ int comedi_alloc_board_minor(struct device *hardware_device)
 		kfree(info);
 		return -ENOMEM;
 	}
+	info->hardware_device = hardware_device;
 	comedi_device_init(info->device);
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	for (i = 0; i < COMEDI_NUM_BOARD_MINORS; ++i) {
 		if (comedi_file_info_table[i] == NULL) {
 			comedi_file_info_table[i] = info;
 			break;
 		}
 	}
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 	if (i == COMEDI_NUM_BOARD_MINORS) {
 		comedi_device_cleanup(info->device);
 		kfree(info->device);
@@ -2230,55 +2520,19 @@ int comedi_alloc_board_minor(struct device *hardware_device)
 	if (!IS_ERR(csdev))
 		info->device->class_dev = csdev;
 	dev_set_drvdata(csdev, info);
-	retval = device_create_file(csdev, &dev_attr_max_read_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_max_read_buffer_kb.attr.name);
-		comedi_free_board_minor(i);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_read_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_read_buffer_kb.attr.name);
-		comedi_free_board_minor(i);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_max_write_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_max_write_buffer_kb.attr.name);
-		comedi_free_board_minor(i);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_write_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_write_buffer_kb.attr.name);
-		comedi_free_board_minor(i);
-		return retval;
-	}
+
 	return i;
 }
 
 void comedi_free_board_minor(unsigned minor)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 
 	BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS);
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	info = comedi_file_info_table[minor];
 	comedi_file_info_table[minor] = NULL;
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 
 	if (info) {
 		struct comedi_device *dev = info->device;
@@ -2294,14 +2548,29 @@ void comedi_free_board_minor(unsigned minor)
 	}
 }
 
+int comedi_find_board_minor(struct device *hardware_device)
+{
+	int minor;
+	struct comedi_device_file_info *info;
+
+	for (minor = 0; minor < COMEDI_NUM_BOARD_MINORS; minor++) {
+		spin_lock(&comedi_file_info_table_lock);
+		info = comedi_file_info_table[minor];
+		if (info && info->hardware_device == hardware_device) {
+			spin_unlock(&comedi_file_info_table_lock);
+			return minor;
+		}
+		spin_unlock(&comedi_file_info_table_lock);
+	}
+	return -ENODEV;
+}
+
 int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 				 struct comedi_subdevice *s)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 	struct device *csdev;
 	unsigned i;
-	int retval;
 
 	info = kmalloc(sizeof(struct comedi_device_file_info), GFP_KERNEL);
 	if (info == NULL)
@@ -2309,14 +2578,14 @@ int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 	info->device = dev;
 	info->read_subdevice = s;
 	info->write_subdevice = s;
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	for (i = COMEDI_FIRST_SUBDEVICE_MINOR; i < COMEDI_NUM_MINORS; ++i) {
 		if (comedi_file_info_table[i] == NULL) {
 			comedi_file_info_table[i] = info;
 			break;
 		}
 	}
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 	if (i == COMEDI_NUM_MINORS) {
 		kfree(info);
 		printk(KERN_ERR
@@ -2331,48 +2600,12 @@ int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 	if (!IS_ERR(csdev))
 		s->class_dev = csdev;
 	dev_set_drvdata(csdev, info);
-	retval = device_create_file(csdev, &dev_attr_max_read_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_max_read_buffer_kb.attr.name);
-		comedi_free_subdevice_minor(s);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_read_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_read_buffer_kb.attr.name);
-		comedi_free_subdevice_minor(s);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_max_write_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_max_write_buffer_kb.attr.name);
-		comedi_free_subdevice_minor(s);
-		return retval;
-	}
-	retval = device_create_file(csdev, &dev_attr_write_buffer_kb);
-	if (retval) {
-		printk(KERN_ERR
-		       "comedi: "
-		       "failed to create sysfs attribute file \"%s\".\n",
-		       dev_attr_write_buffer_kb.attr.name);
-		comedi_free_subdevice_minor(s);
-		return retval;
-	}
+
 	return i;
 }
 
 void comedi_free_subdevice_minor(struct comedi_subdevice *s)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 
 	if (s == NULL)
@@ -2383,10 +2616,10 @@ void comedi_free_subdevice_minor(struct comedi_subdevice *s)
 	BUG_ON(s->minor >= COMEDI_NUM_MINORS);
 	BUG_ON(s->minor < COMEDI_FIRST_SUBDEVICE_MINOR);
 
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	info = comedi_file_info_table[s->minor];
 	comedi_file_info_table[s->minor] = NULL;
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 
 	if (s->class_dev) {
 		device_destroy(comedi_class, MKDEV(COMEDI_MAJOR, s->minor));
@@ -2397,310 +2630,12 @@ void comedi_free_subdevice_minor(struct comedi_subdevice *s)
 
 struct comedi_device_file_info *comedi_get_device_file_info(unsigned minor)
 {
-	unsigned long flags;
 	struct comedi_device_file_info *info;
 
 	BUG_ON(minor >= COMEDI_NUM_MINORS);
-	spin_lock_irqsave(&comedi_file_info_table_lock, flags);
+	spin_lock(&comedi_file_info_table_lock);
 	info = comedi_file_info_table[minor];
-	spin_unlock_irqrestore(&comedi_file_info_table_lock, flags);
+	spin_unlock(&comedi_file_info_table_lock);
 	return info;
 }
 EXPORT_SYMBOL_GPL(comedi_get_device_file_info);
-
-static int resize_async_buffer(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_async *async, unsigned new_size)
-{
-	int retval;
-
-	if (new_size > async->max_bufsize)
-		return -EPERM;
-
-	if (s->busy) {
-		DPRINTK("subdevice is busy, cannot resize buffer\n");
-		return -EBUSY;
-	}
-	if (async->mmap_count) {
-		DPRINTK("subdevice is mmapped, cannot resize buffer\n");
-		return -EBUSY;
-	}
-
-	if (!async->prealloc_buf)
-		return -EINVAL;
-
-	/* make sure buffer is an integral number of pages
-	 * (we round up) */
-	new_size = (new_size + PAGE_SIZE - 1) & PAGE_MASK;
-
-	retval = comedi_buf_alloc(dev, s, new_size);
-	if (retval < 0)
-		return retval;
-
-	if (s->buf_change) {
-		retval = s->buf_change(dev, s, new_size);
-		if (retval < 0)
-			return retval;
-	}
-
-	DPRINTK("comedi%i subd %d buffer resized to %i bytes\n",
-		dev->minor, (int)(s - dev->subdevices), async->prealloc_bufsz);
-	return 0;
-}
-
-/* sysfs attribute files */
-
-static const unsigned bytes_per_kibi = 1024;
-
-static ssize_t show_max_read_buffer_kb(struct device *dev,
-				       struct device_attribute *attr, char *buf)
-{
-	ssize_t retval;
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned max_buffer_size_kb = 0;
-	struct comedi_subdevice *const read_subdevice =
-	    comedi_get_read_subdevice(info);
-
-	mutex_lock(&info->device->mutex);
-	if (read_subdevice &&
-	    (read_subdevice->subdev_flags & SDF_CMD_READ) &&
-	    read_subdevice->async) {
-		max_buffer_size_kb = read_subdevice->async->max_bufsize /
-		    bytes_per_kibi;
-	}
-	retval = snprintf(buf, PAGE_SIZE, "%i\n", max_buffer_size_kb);
-	mutex_unlock(&info->device->mutex);
-
-	return retval;
-}
-
-static ssize_t store_max_read_buffer_kb(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t count)
-{
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned int new_max_size_kb;
-	unsigned int new_max_size;
-	int ret;
-	struct comedi_subdevice *const read_subdevice =
-	    comedi_get_read_subdevice(info);
-
-	ret = kstrtouint(buf, 10, &new_max_size_kb);
-	if (ret)
-		return ret;
-	if (new_max_size_kb > (UINT_MAX / bytes_per_kibi))
-		return -EINVAL;
-	new_max_size = new_max_size_kb * bytes_per_kibi;
-
-	mutex_lock(&info->device->mutex);
-	if (read_subdevice == NULL ||
-	    (read_subdevice->subdev_flags & SDF_CMD_READ) == 0 ||
-	    read_subdevice->async == NULL) {
-		mutex_unlock(&info->device->mutex);
-		return -EINVAL;
-	}
-	read_subdevice->async->max_bufsize = new_max_size;
-	mutex_unlock(&info->device->mutex);
-
-	return count;
-}
-
-static struct device_attribute dev_attr_max_read_buffer_kb = {
-	.attr = {
-		 .name = "max_read_buffer_kb",
-		 .mode = S_IRUGO | S_IWUSR},
-	.show = &show_max_read_buffer_kb,
-	.store = &store_max_read_buffer_kb
-};
-
-static ssize_t show_read_buffer_kb(struct device *dev,
-				   struct device_attribute *attr, char *buf)
-{
-	ssize_t retval;
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned buffer_size_kb = 0;
-	struct comedi_subdevice *const read_subdevice =
-	    comedi_get_read_subdevice(info);
-
-	mutex_lock(&info->device->mutex);
-	if (read_subdevice &&
-	    (read_subdevice->subdev_flags & SDF_CMD_READ) &&
-	    read_subdevice->async) {
-		buffer_size_kb = read_subdevice->async->prealloc_bufsz /
-		    bytes_per_kibi;
-	}
-	retval = snprintf(buf, PAGE_SIZE, "%i\n", buffer_size_kb);
-	mutex_unlock(&info->device->mutex);
-
-	return retval;
-}
-
-static ssize_t store_read_buffer_kb(struct device *dev,
-				    struct device_attribute *attr,
-				    const char *buf, size_t count)
-{
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned int new_size_kb;
-	unsigned int new_size;
-	int retval;
-	int ret;
-	struct comedi_subdevice *const read_subdevice =
-	    comedi_get_read_subdevice(info);
-
-	ret = kstrtouint(buf, 10, &new_size_kb);
-	if (ret)
-		return ret;
-	if (new_size_kb > (UINT_MAX / bytes_per_kibi))
-		return -EINVAL;
-	new_size = new_size_kb * bytes_per_kibi;
-
-	mutex_lock(&info->device->mutex);
-	if (read_subdevice == NULL ||
-	    (read_subdevice->subdev_flags & SDF_CMD_READ) == 0 ||
-	    read_subdevice->async == NULL) {
-		mutex_unlock(&info->device->mutex);
-		return -EINVAL;
-	}
-	retval = resize_async_buffer(info->device, read_subdevice,
-				     read_subdevice->async, new_size);
-	mutex_unlock(&info->device->mutex);
-
-	if (retval < 0)
-		return retval;
-	return count;
-}
-
-static struct device_attribute dev_attr_read_buffer_kb = {
-	.attr = {
-		 .name = "read_buffer_kb",
-		 .mode = S_IRUGO | S_IWUSR | S_IWGRP},
-	.show = &show_read_buffer_kb,
-	.store = &store_read_buffer_kb
-};
-
-static ssize_t show_max_write_buffer_kb(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	ssize_t retval;
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned max_buffer_size_kb = 0;
-	struct comedi_subdevice *const write_subdevice =
-	    comedi_get_write_subdevice(info);
-
-	mutex_lock(&info->device->mutex);
-	if (write_subdevice &&
-	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) &&
-	    write_subdevice->async) {
-		max_buffer_size_kb = write_subdevice->async->max_bufsize /
-		    bytes_per_kibi;
-	}
-	retval = snprintf(buf, PAGE_SIZE, "%i\n", max_buffer_size_kb);
-	mutex_unlock(&info->device->mutex);
-
-	return retval;
-}
-
-static ssize_t store_max_write_buffer_kb(struct device *dev,
-					 struct device_attribute *attr,
-					 const char *buf, size_t count)
-{
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned int new_max_size_kb;
-	unsigned int new_max_size;
-	int ret;
-	struct comedi_subdevice *const write_subdevice =
-	    comedi_get_write_subdevice(info);
-
-	ret = kstrtouint(buf, 10, &new_max_size_kb);
-	if (ret)
-		return ret;
-	if (new_max_size_kb > (UINT_MAX / bytes_per_kibi))
-		return -EINVAL;
-	new_max_size = new_max_size_kb * bytes_per_kibi;
-
-	mutex_lock(&info->device->mutex);
-	if (write_subdevice == NULL ||
-	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) == 0 ||
-	    write_subdevice->async == NULL) {
-		mutex_unlock(&info->device->mutex);
-		return -EINVAL;
-	}
-	write_subdevice->async->max_bufsize = new_max_size;
-	mutex_unlock(&info->device->mutex);
-
-	return count;
-}
-
-static struct device_attribute dev_attr_max_write_buffer_kb = {
-	.attr = {
-		 .name = "max_write_buffer_kb",
-		 .mode = S_IRUGO | S_IWUSR},
-	.show = &show_max_write_buffer_kb,
-	.store = &store_max_write_buffer_kb
-};
-
-static ssize_t show_write_buffer_kb(struct device *dev,
-				    struct device_attribute *attr, char *buf)
-{
-	ssize_t retval;
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned buffer_size_kb = 0;
-	struct comedi_subdevice *const write_subdevice =
-	    comedi_get_write_subdevice(info);
-
-	mutex_lock(&info->device->mutex);
-	if (write_subdevice &&
-	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) &&
-	    write_subdevice->async) {
-		buffer_size_kb = write_subdevice->async->prealloc_bufsz /
-		    bytes_per_kibi;
-	}
-	retval = snprintf(buf, PAGE_SIZE, "%i\n", buffer_size_kb);
-	mutex_unlock(&info->device->mutex);
-
-	return retval;
-}
-
-static ssize_t store_write_buffer_kb(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t count)
-{
-	struct comedi_device_file_info *info = dev_get_drvdata(dev);
-	unsigned int new_size_kb;
-	unsigned int new_size;
-	int retval;
-	int ret;
-	struct comedi_subdevice *const write_subdevice =
-	    comedi_get_write_subdevice(info);
-
-	ret = kstrtouint(buf, 10, &new_size_kb);
-	if (ret)
-		return ret;
-	if (new_size_kb > (UINT_MAX / bytes_per_kibi))
-		return -EINVAL;
-	new_size = ((uint64_t) new_size_kb) * bytes_per_kibi;
-
-	mutex_lock(&info->device->mutex);
-	if (write_subdevice == NULL ||
-	    (write_subdevice->subdev_flags & SDF_CMD_WRITE) == 0 ||
-	    write_subdevice->async == NULL) {
-		mutex_unlock(&info->device->mutex);
-		return -EINVAL;
-	}
-	retval = resize_async_buffer(info->device, write_subdevice,
-				     write_subdevice->async, new_size);
-	mutex_unlock(&info->device->mutex);
-
-	if (retval < 0)
-		return retval;
-	return count;
-}
-
-static struct device_attribute dev_attr_write_buffer_kb = {
-	.attr = {
-		 .name = "write_buffer_kb",
-		 .mode = S_IRUGO | S_IWUSR | S_IWGRP},
-	.show = &show_write_buffer_kb,
-	.store = &store_write_buffer_kb
-};
diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index 7a0d4bcbc355..134be93eaa6d 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -180,13 +180,18 @@ struct comedi_async {
 			unsigned int x);
 };
 
+struct pci_dev;
+struct usb_interface;
+
 struct comedi_driver {
 	struct comedi_driver *next;
 
 	const char *driver_name;
 	struct module *module;
 	int (*attach) (struct comedi_device *, struct comedi_devconfig *);
-	int (*detach) (struct comedi_device *);
+	void (*detach) (struct comedi_device *);
+	int (*attach_pci) (struct comedi_device *, struct pci_dev *);
+	int (*attach_usb) (struct comedi_device *, struct usb_interface *);
 
 	/* number of elements in board_name and board_id arrays */
 	unsigned int num_names;
@@ -230,10 +235,16 @@ struct comedi_device {
 	void (*close) (struct comedi_device *dev);
 };
 
+static inline const void *comedi_board(struct comedi_device *dev)
+{
+	return dev->board_ptr;
+}
+
 struct comedi_device_file_info {
 	struct comedi_device *device;
 	struct comedi_subdevice *read_subdevice;
 	struct comedi_subdevice *write_subdevice;
+	struct device *hardware_device;
 };
 
 #ifdef CONFIG_COMEDI_DEBUG
@@ -287,6 +298,56 @@ int comedi_device_attach(struct comedi_device *dev,
 int comedi_driver_register(struct comedi_driver *);
 int comedi_driver_unregister(struct comedi_driver *);
 
+/**
+ * module_comedi_driver() - Helper macro for registering a comedi driver
+ * @__comedi_driver: comedi_driver struct
+ *
+ * Helper macro for comedi drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only use
+ * this macro once, and calling it replaces module_init() and module_exit().
+ */
+#define module_comedi_driver(__comedi_driver) \
+	module_driver(__comedi_driver, comedi_driver_register, \
+			comedi_driver_unregister)
+
+struct pci_driver;
+
+int comedi_pci_driver_register(struct comedi_driver *, struct pci_driver *);
+void comedi_pci_driver_unregister(struct comedi_driver *, struct pci_driver *);
+
+/**
+ * module_comedi_pci_driver() - Helper macro for registering a comedi PCI driver
+ * @__comedi_driver: comedi_driver struct
+ * @__pci_driver: pci_driver struct
+ *
+ * Helper macro for comedi PCI drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces
+ * module_init() and module_exit()
+ */
+#define module_comedi_pci_driver(__comedi_driver, __pci_driver) \
+	module_driver(__comedi_driver, comedi_pci_driver_register, \
+			comedi_pci_driver_unregister, &(__pci_driver))
+
+struct usb_driver;
+
+int comedi_usb_driver_register(struct comedi_driver *, struct usb_driver *);
+void comedi_usb_driver_unregister(struct comedi_driver *, struct usb_driver *);
+
+/**
+ * module_comedi_usb_driver() - Helper macro for registering a comedi USB driver
+ * @__comedi_driver: comedi_driver struct
+ * @__usb_driver: usb_driver struct
+ *
+ * Helper macro for comedi USB drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces
+ * module_init() and module_exit()
+ */
+#define module_comedi_usb_driver(__comedi_driver, __usb_driver) \
+	module_driver(__comedi_driver, comedi_usb_driver_register, \
+			comedi_usb_driver_unregister, &(__usb_driver))
+
 void init_polling(void);
 void cleanup_polling(void);
 void start_polling(struct comedi_device *);
@@ -456,11 +517,12 @@ static inline void *comedi_aux_data(int options[], int n)
 int comedi_alloc_subdevice_minor(struct comedi_device *dev,
 				 struct comedi_subdevice *s);
 void comedi_free_subdevice_minor(struct comedi_subdevice *s);
-int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name);
+int comedi_pci_auto_config(struct pci_dev *pcidev,
+			   struct comedi_driver *driver);
 void comedi_pci_auto_unconfig(struct pci_dev *pcidev);
-struct usb_device;		/* forward declaration */
-int comedi_usb_auto_config(struct usb_device *usbdev, const char *board_name);
-void comedi_usb_auto_unconfig(struct usb_device *usbdev);
+int comedi_usb_auto_config(struct usb_interface *intf,
+			   struct comedi_driver *driver);
+void comedi_usb_auto_unconfig(struct usb_interface *intf);
 
 #ifdef CONFIG_COMEDI_PCI_DRIVERS
 #define CONFIG_COMEDI_PCI
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index bf185e2807d1..1c3d6386ea36 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -106,6 +106,26 @@ void comedi_device_detach(struct comedi_device *dev)
 	__comedi_device_detach(dev);
 }
 
+/* do a little post-config cleanup */
+/* called with module refcount incremented, decrements it */
+static int comedi_device_postconfig(struct comedi_device *dev)
+{
+	int ret = postconfig(dev);
+	module_put(dev->driver->module);
+	if (ret < 0) {
+		__comedi_device_detach(dev);
+		return ret;
+	}
+	if (!dev->board_name) {
+		printk(KERN_WARNING "BUG: dev->board_name=<%p>\n",
+		       dev->board_name);
+		dev->board_name = "BUG";
+	}
+	smp_wmb();
+	dev->attached = 1;
+	return 0;
+}
+
 int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_driver *driv;
@@ -121,59 +141,36 @@ int comedi_device_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 		if (driv->num_names) {
 			dev->board_ptr = comedi_recognize(driv, it->board_name);
-			if (dev->board_ptr == NULL) {
-				module_put(driv->module);
-				continue;
-			}
-		} else {
-			if (strcmp(driv->driver_name, it->board_name)) {
-				module_put(driv->module);
+			if (dev->board_ptr)
+				break;
+		} else if (strcmp(driv->driver_name, it->board_name))
+			break;
+		module_put(driv->module);
+	}
+	if (driv == NULL) {
+		/*  recognize has failed if we get here */
+		/*  report valid board names before returning error */
+		for (driv = comedi_drivers; driv; driv = driv->next) {
+			if (!try_module_get(driv->module)) {
+				printk(KERN_INFO
+				       "comedi: failed to increment module count\n");
 				continue;
 			}
+			comedi_report_boards(driv);
+			module_put(driv->module);
 		}
-		/* initialize dev->driver here so
-		 * comedi_error() can be called from attach */
-		dev->driver = driv;
-		ret = driv->attach(dev, it);
-		if (ret < 0) {
-			module_put(dev->driver->module);
-			__comedi_device_detach(dev);
-			return ret;
-		}
-		goto attached;
+		return -EIO;
 	}
-
-	/*  recognize has failed if we get here */
-	/*  report valid board names before returning error */
-	for (driv = comedi_drivers; driv; driv = driv->next) {
-		if (!try_module_get(driv->module)) {
-			printk(KERN_INFO
-			       "comedi: failed to increment module count\n");
-			continue;
-		}
-		comedi_report_boards(driv);
-		module_put(driv->module);
-	}
-	return -EIO;
-
-attached:
-	/* do a little post-config cleanup */
-	ret = postconfig(dev);
-	module_put(dev->driver->module);
+	/* initialize dev->driver here so
+	 * comedi_error() can be called from attach */
+	dev->driver = driv;
+	ret = driv->attach(dev, it);
 	if (ret < 0) {
+		module_put(dev->driver->module);
 		__comedi_device_detach(dev);
 		return ret;
 	}
-
-	if (!dev->board_name) {
-		printk(KERN_WARNING "BUG: dev->board_name=<%p>\n",
-		       dev->board_name);
-		dev->board_name = "BUG";
-	}
-	smp_wmb();
-	dev->attached = 1;
-
-	return 0;
+	return comedi_device_postconfig(dev);
 }
 
 int comedi_driver_register(struct comedi_driver *driver)
@@ -242,6 +239,8 @@ static int postconfig(struct comedi_device *dev)
 			s->len_chanlist = 1;
 
 		if (s->do_cmd) {
+			unsigned int buf_size;
+
 			BUG_ON((s->subdev_flags & (SDF_CMD_READ |
 						   SDF_CMD_WRITE)) == 0);
 			BUG_ON(!s->do_cmdtest);
@@ -257,19 +256,20 @@ static int postconfig(struct comedi_device *dev)
 			async->subdevice = s;
 			s->async = async;
 
-#define DEFAULT_BUF_MAXSIZE (64*1024)
-#define DEFAULT_BUF_SIZE (64*1024)
-
-			async->max_bufsize = DEFAULT_BUF_MAXSIZE;
+			async->max_bufsize =
+				comedi_default_buf_maxsize_kb * 1024;
+			buf_size = comedi_default_buf_size_kb * 1024;
+			if (buf_size > async->max_bufsize)
+				buf_size = async->max_bufsize;
 
 			async->prealloc_buf = NULL;
 			async->prealloc_bufsz = 0;
-			if (comedi_buf_alloc(dev, s, DEFAULT_BUF_SIZE) < 0) {
+			if (comedi_buf_alloc(dev, s, buf_size) < 0) {
 				printk(KERN_INFO "Buffer allocation failed\n");
 				return -ENOMEM;
 			}
 			if (s->buf_change) {
-				ret = s->buf_change(dev, s, DEFAULT_BUF_SIZE);
+				ret = s->buf_change(dev, s, buf_size);
 				if (ret < 0)
 					return ret;
 			}
@@ -814,67 +814,102 @@ void comedi_reset_async_buf(struct comedi_async *async)
 	async->events = 0;
 }
 
-static int comedi_auto_config(struct device *hardware_device,
-			      const char *board_name, const int *options,
-			      unsigned num_options)
+static int
+comedi_auto_config_helper(struct device *hardware_device,
+			  struct comedi_driver *driver,
+			  int (*attach_wrapper) (struct comedi_device *,
+						 void *), void *context)
 {
-	struct comedi_devconfig it;
 	int minor;
 	struct comedi_device_file_info *dev_file_info;
-	int retval;
-	unsigned *private_data = NULL;
+	struct comedi_device *comedi_dev;
+	int ret;
 
-	if (!comedi_autoconfig) {
-		dev_set_drvdata(hardware_device, NULL);
+	if (!comedi_autoconfig)
 		return 0;
-	}
 
 	minor = comedi_alloc_board_minor(hardware_device);
 	if (minor < 0)
 		return minor;
 
-	private_data = kmalloc(sizeof(unsigned), GFP_KERNEL);
-	if (private_data == NULL) {
-		retval = -ENOMEM;
-		goto cleanup;
+	dev_file_info = comedi_get_device_file_info(minor);
+	comedi_dev = dev_file_info->device;
+
+	mutex_lock(&comedi_dev->mutex);
+	if (comedi_dev->attached)
+		ret = -EBUSY;
+	else if (!try_module_get(driver->module)) {
+		printk(KERN_INFO "comedi: failed to increment module count\n");
+		ret = -EIO;
+	} else {
+		/* set comedi_dev->driver here for attach wrapper */
+		comedi_dev->driver = driver;
+		ret = (*attach_wrapper)(comedi_dev, context);
+		if (ret < 0) {
+			module_put(driver->module);
+			__comedi_device_detach(comedi_dev);
+		} else {
+			ret = comedi_device_postconfig(comedi_dev);
+		}
 	}
-	*private_data = minor;
-	dev_set_drvdata(hardware_device, private_data);
+	mutex_unlock(&comedi_dev->mutex);
 
-	dev_file_info = comedi_get_device_file_info(minor);
+	if (ret < 0)
+		comedi_free_board_minor(minor);
+	return ret;
+}
+
+static int comedi_auto_config_wrapper(struct comedi_device *dev, void *context)
+{
+	struct comedi_devconfig *it = context;
+	struct comedi_driver *driv = dev->driver;
+
+	if (driv->num_names) {
+		/* look for generic board entry matching driver name, which
+		 * has already been copied to it->board_name */
+		dev->board_ptr = comedi_recognize(driv, it->board_name);
+		if (dev->board_ptr == NULL) {
+			printk(KERN_WARNING
+			       "comedi: auto config failed to find board entry"
+			       " '%s' for driver '%s'\n", it->board_name,
+			       driv->driver_name);
+			comedi_report_boards(driv);
+			return -EINVAL;
+		}
+	}
+	return driv->attach(dev, it);
+}
+
+static int comedi_auto_config(struct device *hardware_device,
+			      struct comedi_driver *driver, const int *options,
+			      unsigned num_options)
+{
+	struct comedi_devconfig it;
 
 	memset(&it, 0, sizeof(it));
-	strncpy(it.board_name, board_name, COMEDI_NAMELEN);
+	strncpy(it.board_name, driver->driver_name, COMEDI_NAMELEN);
 	it.board_name[COMEDI_NAMELEN - 1] = '\0';
 	BUG_ON(num_options > COMEDI_NDEVCONFOPTS);
 	memcpy(it.options, options, num_options * sizeof(int));
-
-	mutex_lock(&dev_file_info->device->mutex);
-	retval = comedi_device_attach(dev_file_info->device, &it);
-	mutex_unlock(&dev_file_info->device->mutex);
-
-cleanup:
-	if (retval < 0) {
-		kfree(private_data);
-		comedi_free_board_minor(minor);
-	}
-	return retval;
+	return comedi_auto_config_helper(hardware_device, driver,
+					 comedi_auto_config_wrapper, &it);
 }
 
 static void comedi_auto_unconfig(struct device *hardware_device)
 {
-	unsigned *minor = (unsigned *)dev_get_drvdata(hardware_device);
-	if (minor == NULL)
-		return;
-
-	BUG_ON(*minor >= COMEDI_NUM_BOARD_MINORS);
+	int minor;
 
-	comedi_free_board_minor(*minor);
-	dev_set_drvdata(hardware_device, NULL);
-	kfree(minor);
+	if (hardware_device == NULL)
+		return;
+	minor = comedi_find_board_minor(hardware_device);
+	if (minor < 0)
+		return;
+	BUG_ON(minor >= COMEDI_NUM_BOARD_MINORS);
+	comedi_free_board_minor(minor);
 }
 
-int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name)
+static int comedi_old_pci_auto_config(struct pci_dev *pcidev,
+				      struct comedi_driver *driver)
 {
 	int options[2];
 
@@ -883,9 +918,30 @@ int comedi_pci_auto_config(struct pci_dev *pcidev, const char *board_name)
 	/*  pci slot */
 	options[1] = PCI_SLOT(pcidev->devfn);
 
-	return comedi_auto_config(&pcidev->dev, board_name,
+	return comedi_auto_config(&pcidev->dev, driver,
 				  options, ARRAY_SIZE(options));
 }
+
+static int comedi_pci_attach_wrapper(struct comedi_device *dev, void *pcidev)
+{
+	return dev->driver->attach_pci(dev, pcidev);
+}
+
+static int comedi_new_pci_auto_config(struct pci_dev *pcidev,
+				      struct comedi_driver *driver)
+{
+	return comedi_auto_config_helper(&pcidev->dev, driver,
+					 comedi_pci_attach_wrapper, pcidev);
+}
+
+int comedi_pci_auto_config(struct pci_dev *pcidev, struct comedi_driver *driver)
+{
+
+	if (driver->attach_pci)
+		return comedi_new_pci_auto_config(pcidev, driver);
+	else
+		return comedi_old_pci_auto_config(pcidev, driver);
+}
 EXPORT_SYMBOL_GPL(comedi_pci_auto_config);
 
 void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
@@ -894,16 +950,96 @@ void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
 }
 EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
 
-int comedi_usb_auto_config(struct usb_device *usbdev, const char *board_name)
+int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
+		struct pci_driver *pci_driver)
+{
+	int ret;
+
+	ret = comedi_driver_register(comedi_driver);
+	if (ret < 0)
+		return ret;
+
+	/* FIXME: Remove this test after auditing all comedi pci drivers */
+	if (!pci_driver->name)
+		pci_driver->name = comedi_driver->driver_name;
+
+	ret = pci_register_driver(pci_driver);
+	if (ret < 0) {
+		comedi_driver_unregister(comedi_driver);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(comedi_pci_driver_register);
+
+void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
+		struct pci_driver *pci_driver)
+{
+	pci_unregister_driver(pci_driver);
+	comedi_driver_unregister(comedi_driver);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
+
+static int comedi_old_usb_auto_config(struct usb_interface *intf,
+				      struct comedi_driver *driver)
+{
+	return comedi_auto_config(&intf->dev, driver, NULL, 0);
+}
+
+static int comedi_usb_attach_wrapper(struct comedi_device *dev, void *intf)
+{
+	return dev->driver->attach_usb(dev, intf);
+}
+
+static int comedi_new_usb_auto_config(struct usb_interface *intf,
+				      struct comedi_driver *driver)
+{
+	return comedi_auto_config_helper(&intf->dev, driver,
+					 comedi_usb_attach_wrapper, intf);
+}
+
+int comedi_usb_auto_config(struct usb_interface *intf,
+			   struct comedi_driver *driver)
 {
-	BUG_ON(usbdev == NULL);
-	return comedi_auto_config(&usbdev->dev, board_name, NULL, 0);
+	BUG_ON(intf == NULL);
+	if (driver->attach_usb)
+		return comedi_new_usb_auto_config(intf, driver);
+	else
+		return comedi_old_usb_auto_config(intf, driver);
 }
 EXPORT_SYMBOL_GPL(comedi_usb_auto_config);
 
-void comedi_usb_auto_unconfig(struct usb_device *usbdev)
+void comedi_usb_auto_unconfig(struct usb_interface *intf)
 {
-	BUG_ON(usbdev == NULL);
-	comedi_auto_unconfig(&usbdev->dev);
+	BUG_ON(intf == NULL);
+	comedi_auto_unconfig(&intf->dev);
 }
 EXPORT_SYMBOL_GPL(comedi_usb_auto_unconfig);
+
+int comedi_usb_driver_register(struct comedi_driver *comedi_driver,
+		struct usb_driver *usb_driver)
+{
+	int ret;
+
+	ret = comedi_driver_register(comedi_driver);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_register(usb_driver);
+	if (ret < 0) {
+		comedi_driver_unregister(comedi_driver);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(comedi_usb_driver_register);
+
+void comedi_usb_driver_unregister(struct comedi_driver *comedi_driver,
+		struct usb_driver *usb_driver)
+{
+	usb_deregister(usb_driver);
+	comedi_driver_unregister(comedi_driver);
+}
+EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c
index 6c26ac887eee..27e39e4eb6b3 100644
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@@ -107,31 +107,6 @@ struct subdev_8255_struct {
 #define CALLBACK_FUNC	(((struct subdev_8255_struct *)s->private)->cb_func)
 #define subdevpriv	((struct subdev_8255_struct *)s->private)
 
-static int dev_8255_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int dev_8255_detach(struct comedi_device *dev);
-static struct comedi_driver driver_8255 = {
-	.driver_name = "8255",
-	.module = THIS_MODULE,
-	.attach = dev_8255_attach,
-	.detach = dev_8255_detach,
-};
-
-static int __init driver_8255_init_module(void)
-{
-	return comedi_driver_register(&driver_8255);
-}
-
-static void __exit driver_8255_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_8255);
-}
-
-module_init(driver_8255_init_module);
-module_exit(driver_8255_cleanup_module);
-
-static void do_config(struct comedi_device *dev, struct comedi_subdevice *s);
-
 void subdev_8255_interrupt(struct comedi_device *dev,
 			   struct comedi_subdevice *s)
 {
@@ -185,6 +160,23 @@ static int subdev_8255_insn(struct comedi_device *dev,
 	return 2;
 }
 
+static void do_config(struct comedi_device *dev, struct comedi_subdevice *s)
+{
+	int config;
+
+	config = CR_CW;
+	/* 1 in io_bits indicates output, 1 in config indicates input */
+	if (!(s->io_bits & 0x0000ff))
+		config |= CR_A_IO;
+	if (!(s->io_bits & 0x00ff00))
+		config |= CR_B_IO;
+	if (!(s->io_bits & 0x0f0000))
+		config |= CR_C_LO_IO;
+	if (!(s->io_bits & 0xf00000))
+		config |= CR_C_HI_IO;
+	CALLBACK_FUNC(1, _8255_CR, config, CALLBACK_ARG);
+}
+
 static int subdev_8255_insn_config(struct comedi_device *dev,
 				   struct comedi_subdevice *s,
 				   struct comedi_insn *insn, unsigned int *data)
@@ -222,23 +214,6 @@ static int subdev_8255_insn_config(struct comedi_device *dev,
 	return 1;
 }
 
-static void do_config(struct comedi_device *dev, struct comedi_subdevice *s)
-{
-	int config;
-
-	config = CR_CW;
-	/* 1 in io_bits indicates output, 1 in config indicates input */
-	if (!(s->io_bits & 0x0000ff))
-		config |= CR_A_IO;
-	if (!(s->io_bits & 0x00ff00))
-		config |= CR_B_IO;
-	if (!(s->io_bits & 0x0f0000))
-		config |= CR_C_LO_IO;
-	if (!(s->io_bits & 0xf00000))
-		config |= CR_C_HI_IO;
-	CALLBACK_FUNC(1, _8255_CR, config, CALLBACK_ARG);
-}
-
 static int subdev_8255_cmdtest(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_cmd *cmd)
@@ -442,14 +417,12 @@ static int dev_8255_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int dev_8255_detach(struct comedi_device *dev)
+static void dev_8255_detach(struct comedi_device *dev)
 {
 	int i;
 	unsigned long iobase;
 	struct comedi_subdevice *s;
 
-	printk(KERN_INFO "comedi%d: 8255: remove\n", dev->minor);
-
 	for (i = 0; i < dev->n_subdevices; i++) {
 		s = dev->subdevices + i;
 		if (s->type != COMEDI_SUBD_UNUSED) {
@@ -458,10 +431,16 @@ static int dev_8255_detach(struct comedi_device *dev)
 		}
 		subdev_8255_cleanup(dev, s);
 	}
-
-	return 0;
 }
 
+static struct comedi_driver dev_8255_driver = {
+	.driver_name	= "8255",
+	.module		= THIS_MODULE,
+	.attach		= dev_8255_attach,
+	.detach		= dev_8255_detach,
+};
+module_comedi_driver(dev_8255_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/acl7225b.c b/drivers/staging/comedi/drivers/acl7225b.c
index 9def2250bb80..4e4fc418655f 100644
--- a/drivers/staging/comedi/drivers/acl7225b.c
+++ b/drivers/staging/comedi/drivers/acl7225b.c
@@ -22,46 +22,13 @@ Devices: [Adlink] ACL-7225b (acl7225b), [ICP] P16R16DIO (p16r16dio)
 #define ACL7225_DI_LO  2	/* Digital input low byte (DI0-DI7) */
 #define ACL7225_DI_HI  3	/* Digital input high byte (DI8-DI15) */
 
-static int acl7225b_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int acl7225b_detach(struct comedi_device *dev);
-
 struct boardtype {
 	const char *name;	/*  driver name */
 	int io_range;		/*  len of I/O space */
 };
 
-static const struct boardtype boardtypes[] = {
-	{"acl7225b", ACL7225_SIZE,},
-	{"p16r16dio", P16R16DIO_SIZE,},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
 #define this_board ((const struct boardtype *)dev->board_ptr)
 
-static struct comedi_driver driver_acl7225b = {
-	.driver_name = "acl7225b",
-	.module = THIS_MODULE,
-	.attach = acl7225b_attach,
-	.detach = acl7225b_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct boardtype),
-};
-
-static int __init driver_acl7225b_init_module(void)
-{
-	return comedi_driver_register(&driver_acl7225b);
-}
-
-static void __exit driver_acl7225b_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_acl7225b);
-}
-
-module_init(driver_acl7225b_init_module);
-module_exit(driver_acl7225b_cleanup_module);
-
 static int acl7225b_do_insn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -152,16 +119,28 @@ static int acl7225b_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int acl7225b_detach(struct comedi_device *dev)
+static void acl7225b_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: acl7225b: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, this_board->io_range);
-
-	return 0;
 }
 
+static const struct boardtype boardtypes[] = {
+	{ "acl7225b", ACL7225_SIZE, },
+	{ "p16r16dio", P16R16DIO_SIZE, },
+};
+
+static struct comedi_driver acl7225b_driver = {
+	.driver_name	= "acl7225b",
+	.module		= THIS_MODULE,
+	.attach		= acl7225b_attach,
+	.detach		= acl7225b_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct boardtype),
+};
+module_comedi_driver(acl7225b_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index ca5bd9b8704a..44aaf8351ba3 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -224,2318 +224,1213 @@ MODULE_DEVICE_TABLE(pci, addi_apci_tbl);
 
 static const struct addi_board boardtypes[] = {
 #ifdef CONFIG_APCI_3120
-	{"apci3120",
-			APCI3120_BOARD_VENDOR_ID,
-			0x818D,
-			AMCC_OP_REG_SIZE,
-			APCI3120_ADDRESS_RANGE,
-			8,
-			0,
-			ADDIDATA_NO_EEPROM,
-			NULL,
-			16,
-			8,
-			16,
-			8,
-			0xffff,
-			0x3fff,
-			&range_apci3120_ai,
-			&range_apci3120_ao,
-			4,
-			4,
-			0x0f,
-			0,
-			NULL,
-			1,
-			1,
-			1,
-			10000,
-			100000,
-			v_APCI3120_Interrupt,
-			i_APCI3120_Reset,
-			i_APCI3120_InsnConfigAnalogInput,
-			i_APCI3120_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			i_APCI3120_CommandTestAnalogInput,
-			i_APCI3120_CommandAnalogInput,
-			i_APCI3120_StopCyclicAcquisition,
-			NULL,
-			i_APCI3120_InsnWriteAnalogOutput,
-			NULL,
-			NULL,
-			i_APCI3120_InsnReadDigitalInput,
-			NULL,
-			i_APCI3120_InsnBitsDigitalInput,
-			i_APCI3120_InsnConfigDigitalOutput,
-			i_APCI3120_InsnWriteDigitalOutput,
-			i_APCI3120_InsnBitsDigitalOutput,
-			NULL,
-			i_APCI3120_InsnConfigTimer,
-			i_APCI3120_InsnWriteTimer,
-			i_APCI3120_InsnReadTimer,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci3120",
+		.i_VendorId		= APCI3120_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x818D,
+		.i_IorangeBase0		= AMCC_OP_REG_SIZE,
+		.i_IorangeBase1		= APCI3120_ADDRESS_RANGE,
+		.i_IorangeBase2		= 8,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_NbrAoChannel		= 8,
+		.i_AiMaxdata		= 0xffff,
+		.i_AoMaxdata		= 0x3fff,
+		.pr_AiRangelist		= &range_apci3120_ai,
+		.pr_AoRangelist		= &range_apci3120_ao,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 0x0f,
+		.i_Dma			= 1,
+		.i_Timer		= 1,
+		.b_AvailableConvertUnit	= 1,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.ui_MinDelaytimeNs	= 100000,
+		.interrupt		= v_APCI3120_Interrupt,
+		.reset			= i_APCI3120_Reset,
+		.ai_config		= i_APCI3120_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3120_InsnReadAnalogInput,
+		.ai_cmdtest		= i_APCI3120_CommandTestAnalogInput,
+		.ai_cmd			= i_APCI3120_CommandAnalogInput,
+		.ai_cancel		= i_APCI3120_StopCyclicAcquisition,
+		.ao_write		= i_APCI3120_InsnWriteAnalogOutput,
+		.di_read		= i_APCI3120_InsnReadDigitalInput,
+		.di_bits		= i_APCI3120_InsnBitsDigitalInput,
+		.do_config		= i_APCI3120_InsnConfigDigitalOutput,
+		.do_write		= i_APCI3120_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3120_InsnBitsDigitalOutput,
+		.timer_config		= i_APCI3120_InsnConfigTimer,
+		.timer_write		= i_APCI3120_InsnWriteTimer,
+		.timer_read		= i_APCI3120_InsnReadTimer,
+	},
 #endif
 #ifdef CONFIG_APCI_1032
-	{"apci1032",
-			APCI1032_BOARD_VENDOR_ID,
-			0x1003,
-			4,
-			APCI1032_ADDRESS_RANGE,
-			0,
-			0,
-			ADDIDATA_EEPROM,
-			ADDIDATA_93C76,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			NULL,
-			32,
-			0,
-			0,
-			0,
-			NULL,
-			0,
-			0,
-			0,
-			0,
-			0,
-			v_APCI1032_Interrupt,
-			i_APCI1032_Reset,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI1032_ConfigDigitalInput,
-			i_APCI1032_Read1DigitalInput,
-			NULL,
-			i_APCI1032_ReadMoreDigitalInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci1032",
+		.i_VendorId		= APCI1032_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x1003,
+		.i_IorangeBase0		= 4,
+		.i_IorangeBase1		= APCI1032_ADDRESS_RANGE,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_93C76,
+		.i_NbrDiChannel		= 32,
+		.interrupt		= v_APCI1032_Interrupt,
+		.reset			= i_APCI1032_Reset,
+		.di_config		= i_APCI1032_ConfigDigitalInput,
+		.di_read		= i_APCI1032_Read1DigitalInput,
+		.di_bits		= i_APCI1032_ReadMoreDigitalInput,
+	},
 #endif
 #ifdef CONFIG_APCI_1516
-	{"apci1516",
-			APCI1516_BOARD_VENDOR_ID,
-			0x1001,
-			128,
-			APCI1516_ADDRESS_RANGE,
-			32,
-			0,
-			ADDIDATA_EEPROM,
-			ADDIDATA_S5920,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			NULL,
-			8,
-			8,
-			0,
-			0,
-			NULL,
-			0,
-			1,
-			0,
-			0,
-			0,
-			NULL,
-			i_APCI1516_Reset,
-			NULL, NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI1516_Read1DigitalInput,
-			NULL,
-			i_APCI1516_ReadMoreDigitalInput,
-			i_APCI1516_ConfigDigitalOutput,
-			i_APCI1516_WriteDigitalOutput,
-			i_APCI1516_ReadDigitalOutput,
-			NULL,
-			i_APCI1516_ConfigWatchdog,
-			i_APCI1516_StartStopWriteWatchdog,
-			i_APCI1516_ReadWatchdog,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci1516",
+		.i_VendorId		= APCI1516_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x1001,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= APCI1516_ADDRESS_RANGE,
+		.i_IorangeBase2		= 32,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrDiChannel		= 8,
+		.i_NbrDoChannel		= 8,
+		.i_Timer		= 1,
+		.reset			= i_APCI1516_Reset,
+		.di_read		= i_APCI1516_Read1DigitalInput,
+		.di_bits		= i_APCI1516_ReadMoreDigitalInput,
+		.do_config		= i_APCI1516_ConfigDigitalOutput,
+		.do_write		= i_APCI1516_WriteDigitalOutput,
+		.do_bits		= i_APCI1516_ReadDigitalOutput,
+		.timer_config		= i_APCI1516_ConfigWatchdog,
+		.timer_write		= i_APCI1516_StartStopWriteWatchdog,
+		.timer_read		= i_APCI1516_ReadWatchdog,
+	},
 #endif
 #ifdef CONFIG_APCI_2016
-	{"apci2016",
-			APCI2016_BOARD_VENDOR_ID,
-			0x1002,
-			128,
-			APCI2016_ADDRESS_RANGE,
-			32,
-			0,
-			ADDIDATA_EEPROM,
-			ADDIDATA_S5920,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			NULL,
-			0,
-			16,
-			0,
-			0,
-			NULL,
-			0,
-			1,
-			0,
-			0,
-			0,
-			NULL,
-			i_APCI2016_Reset,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI2016_ConfigDigitalOutput,
-			i_APCI2016_WriteDigitalOutput,
-			i_APCI2016_BitsDigitalOutput,
-			NULL,
-			i_APCI2016_ConfigWatchdog,
-			i_APCI2016_StartStopWriteWatchdog,
-			i_APCI2016_ReadWatchdog,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci2016",
+		.i_VendorId		= APCI2016_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x1002,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= APCI2016_ADDRESS_RANGE,
+		.i_IorangeBase2		= 32,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrDoChannel		= 16,
+		.i_Timer		= 1,
+		.reset			= i_APCI2016_Reset,
+		.do_config		= i_APCI2016_ConfigDigitalOutput,
+		.do_write		= i_APCI2016_WriteDigitalOutput,
+		.do_bits		= i_APCI2016_BitsDigitalOutput,
+		.timer_config		= i_APCI2016_ConfigWatchdog,
+		.timer_write		= i_APCI2016_StartStopWriteWatchdog,
+		.timer_read		= i_APCI2016_ReadWatchdog,
+	},
 #endif
 #ifdef CONFIG_APCI_2032
-	{"apci2032",
-			APCI2032_BOARD_VENDOR_ID,
-			0x1004,
-			4,
-			APCI2032_ADDRESS_RANGE,
-			0,
-			0,
-			ADDIDATA_EEPROM,
-			ADDIDATA_93C76,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			NULL,
-			0,
-			32,
-			0xffffffff,
-			0,
-			NULL,
-			0,
-			1,
-			0,
-			0,
-			0,
-			v_APCI2032_Interrupt,
-			i_APCI2032_Reset,
-			NULL, NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI2032_ConfigDigitalOutput,
-			i_APCI2032_WriteDigitalOutput,
-			i_APCI2032_ReadDigitalOutput,
-			i_APCI2032_ReadInterruptStatus,
-			i_APCI2032_ConfigWatchdog,
-			i_APCI2032_StartStopWriteWatchdog,
-			i_APCI2032_ReadWatchdog,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci2032",
+		.i_VendorId		= APCI2032_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x1004,
+		.i_IorangeBase0		= 4,
+		.i_IorangeBase1		= APCI2032_ADDRESS_RANGE,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_93C76,
+		.i_NbrDoChannel		= 32,
+		.i_DoMaxdata		= 0xffffffff,
+		.i_Timer		= 1,
+		.interrupt		= v_APCI2032_Interrupt,
+		.reset			= i_APCI2032_Reset,
+		.do_config		= i_APCI2032_ConfigDigitalOutput,
+		.do_write		= i_APCI2032_WriteDigitalOutput,
+		.do_bits		= i_APCI2032_ReadDigitalOutput,
+		.do_read		= i_APCI2032_ReadInterruptStatus,
+		.timer_config		= i_APCI2032_ConfigWatchdog,
+		.timer_write		= i_APCI2032_StartStopWriteWatchdog,
+		.timer_read		= i_APCI2032_ReadWatchdog,
+	},
 #endif
 #ifdef CONFIG_APCI_2200
-	{"apci2200",
-			APCI2200_BOARD_VENDOR_ID,
-			0x1005,
-			4,
-			APCI2200_ADDRESS_RANGE,
-			0,
-			0,
-			ADDIDATA_EEPROM,
-			ADDIDATA_93C76,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			NULL,
-			8,
-			16,
-			0,
-			0,
-			NULL,
-			0,
-			1,
-			0,
-			0,
-			0,
-			NULL,
-			i_APCI2200_Reset,
-			NULL, NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI2200_Read1DigitalInput,
-			NULL,
-			i_APCI2200_ReadMoreDigitalInput,
-			i_APCI2200_ConfigDigitalOutput,
-			i_APCI2200_WriteDigitalOutput,
-			i_APCI2200_ReadDigitalOutput,
-			NULL,
-			i_APCI2200_ConfigWatchdog,
-			i_APCI2200_StartStopWriteWatchdog,
-			i_APCI2200_ReadWatchdog,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci2200",
+		.i_VendorId		= APCI2200_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x1005,
+		.i_IorangeBase0		= 4,
+		.i_IorangeBase1		= APCI2200_ADDRESS_RANGE,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_93C76,
+		.i_NbrDiChannel		= 8,
+		.i_NbrDoChannel		= 16,
+		.i_Timer		= 1,
+		.reset			= i_APCI2200_Reset,
+		.di_read		= i_APCI2200_Read1DigitalInput,
+		.di_bits		= i_APCI2200_ReadMoreDigitalInput,
+		.do_config		= i_APCI2200_ConfigDigitalOutput,
+		.do_write		= i_APCI2200_WriteDigitalOutput,
+		.do_bits		= i_APCI2200_ReadDigitalOutput,
+		.timer_config		= i_APCI2200_ConfigWatchdog,
+		.timer_write		= i_APCI2200_StartStopWriteWatchdog,
+		.timer_read		= i_APCI2200_ReadWatchdog,
+	},
 #endif
 #ifdef CONFIG_APCI_1564
-	{"apci1564",
-			APCI1564_BOARD_VENDOR_ID,
-			0x1006,
-			128,
-			APCI1564_ADDRESS_RANGE,
-			0,
-			0,
-			ADDIDATA_EEPROM,
-			ADDIDATA_93C76,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			NULL,
-			32,
-			32,
-			0xffffffff,
-			0,
-			NULL,
-			0,
-			1,
-			0,
-			0,
-			0,
-			v_APCI1564_Interrupt,
-			i_APCI1564_Reset,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI1564_ConfigDigitalInput,
-			i_APCI1564_Read1DigitalInput,
-			NULL,
-			i_APCI1564_ReadMoreDigitalInput,
-			i_APCI1564_ConfigDigitalOutput,
-			i_APCI1564_WriteDigitalOutput,
-			i_APCI1564_ReadDigitalOutput,
-			i_APCI1564_ReadInterruptStatus,
-			i_APCI1564_ConfigTimerCounterWatchdog,
-			i_APCI1564_StartStopWriteTimerCounterWatchdog,
-			i_APCI1564_ReadTimerCounterWatchdog,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci1564",
+		.i_VendorId		= APCI1564_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x1006,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= APCI1564_ADDRESS_RANGE,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_93C76,
+		.i_NbrDiChannel		= 32,
+		.i_NbrDoChannel		= 32,
+		.i_DoMaxdata		= 0xffffffff,
+		.i_Timer		= 1,
+		.interrupt		= v_APCI1564_Interrupt,
+		.reset			= i_APCI1564_Reset,
+		.di_config		= i_APCI1564_ConfigDigitalInput,
+		.di_read		= i_APCI1564_Read1DigitalInput,
+		.di_bits		= i_APCI1564_ReadMoreDigitalInput,
+		.do_config		= i_APCI1564_ConfigDigitalOutput,
+		.do_write		= i_APCI1564_WriteDigitalOutput,
+		.do_bits		= i_APCI1564_ReadDigitalOutput,
+		.do_read		= i_APCI1564_ReadInterruptStatus,
+		.timer_config		= i_APCI1564_ConfigTimerCounterWatchdog,
+		.timer_write		= i_APCI1564_StartStopWriteTimerCounterWatchdog,
+		.timer_read		= i_APCI1564_ReadTimerCounterWatchdog,
+	},
 #endif
 #ifdef CONFIG_APCI_1500
-	{"apci1500",
-			APCI1500_BOARD_VENDOR_ID,
-			0x80fc,
-			128,
-			APCI1500_ADDRESS_RANGE,
-			4,
-			0,
-			ADDIDATA_NO_EEPROM,
-			NULL,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			NULL,
-			16,
-			16,
-			0xffff,
-			0,
-			NULL,
-			0,
-			1,
-			0,
-			0,
-			0,
-			v_APCI1500_Interrupt,
-			i_APCI1500_Reset,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI1500_ConfigDigitalInputEvent,
-			i_APCI1500_Initialisation,
-			i_APCI1500_StartStopInputEvent,
-			i_APCI1500_ReadMoreDigitalInput,
-			i_APCI1500_ConfigDigitalOutputErrorInterrupt,
-			i_APCI1500_WriteDigitalOutput,
-			i_APCI1500_ConfigureInterrupt,
-			NULL,
-			i_APCI1500_ConfigCounterTimerWatchdog,
-			i_APCI1500_StartStopTriggerTimerCounterWatchdog,
-			i_APCI1500_ReadInterruptMask,
-			i_APCI1500_ReadCounterTimerWatchdog,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci1500",
+		.i_VendorId		= APCI1500_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x80fc,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= APCI1500_ADDRESS_RANGE,
+		.i_IorangeBase2		= 4,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.i_NbrDiChannel		= 16,
+		.i_NbrDoChannel		= 16,
+		.i_DoMaxdata		= 0xffff,
+		.i_Timer		= 1,
+		.interrupt		= v_APCI1500_Interrupt,
+		.reset			= i_APCI1500_Reset,
+		.di_config		= i_APCI1500_ConfigDigitalInputEvent,
+		.di_read		= i_APCI1500_Initialisation,
+		.di_write		= i_APCI1500_StartStopInputEvent,
+		.di_bits		= i_APCI1500_ReadMoreDigitalInput,
+		.do_config		= i_APCI1500_ConfigDigitalOutputErrorInterrupt,
+		.do_write		= i_APCI1500_WriteDigitalOutput,
+		.do_bits		= i_APCI1500_ConfigureInterrupt,
+		.timer_config		= i_APCI1500_ConfigCounterTimerWatchdog,
+		.timer_write		= i_APCI1500_StartStopTriggerTimerCounterWatchdog,
+		.timer_read		= i_APCI1500_ReadInterruptMask,
+		.timer_bits		= i_APCI1500_ReadCounterTimerWatchdog,
+	},
 #endif
 #ifdef CONFIG_APCI_3001
-	{"apci3001",
-			APCI3120_BOARD_VENDOR_ID,
-			0x828D,
-			AMCC_OP_REG_SIZE,
-			APCI3120_ADDRESS_RANGE,
-			8,
-			0,
-			ADDIDATA_NO_EEPROM,
-			NULL,
-			16,
-			8,
-			16,
-			0,
-			0xfff,
-			0,
-			&range_apci3120_ai,
-			NULL,
-			4,
-			4,
-			0x0f,
-			0,
-			NULL,
-			1,
-			1,
-			1,
-			10000,
-			100000,
-			v_APCI3120_Interrupt,
-			i_APCI3120_Reset,
-			i_APCI3120_InsnConfigAnalogInput,
-			i_APCI3120_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			i_APCI3120_CommandTestAnalogInput,
-			i_APCI3120_CommandAnalogInput,
-			i_APCI3120_StopCyclicAcquisition,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3120_InsnReadDigitalInput,
-			NULL,
-			i_APCI3120_InsnBitsDigitalInput,
-			i_APCI3120_InsnConfigDigitalOutput,
-			i_APCI3120_InsnWriteDigitalOutput,
-			i_APCI3120_InsnBitsDigitalOutput,
-			NULL,
-			i_APCI3120_InsnConfigTimer,
-			i_APCI3120_InsnWriteTimer,
-			i_APCI3120_InsnReadTimer,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci3001",
+		.i_VendorId		= APCI3120_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x828D,
+		.i_IorangeBase0		= AMCC_OP_REG_SIZE,
+		.i_IorangeBase1		= APCI3120_ADDRESS_RANGE,
+		.i_IorangeBase2		= 8,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 0xfff,
+		.pr_AiRangelist		= &range_apci3120_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 0x0f,
+		.i_Dma			= 1,
+		.i_Timer		= 1,
+		.b_AvailableConvertUnit	= 1,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.ui_MinDelaytimeNs	= 100000,
+		.interrupt		= v_APCI3120_Interrupt,
+		.reset			= i_APCI3120_Reset,
+		.ai_config		= i_APCI3120_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3120_InsnReadAnalogInput,
+		.ai_cmdtest		= i_APCI3120_CommandTestAnalogInput,
+		.ai_cmd			= i_APCI3120_CommandAnalogInput,
+		.ai_cancel		= i_APCI3120_StopCyclicAcquisition,
+		.di_read		= i_APCI3120_InsnReadDigitalInput,
+		.di_bits		= i_APCI3120_InsnBitsDigitalInput,
+		.do_config		= i_APCI3120_InsnConfigDigitalOutput,
+		.do_write		= i_APCI3120_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3120_InsnBitsDigitalOutput,
+		.timer_config		= i_APCI3120_InsnConfigTimer,
+		.timer_write		= i_APCI3120_InsnWriteTimer,
+		.timer_read		= i_APCI3120_InsnReadTimer,
+	},
 #endif
 #ifdef CONFIG_APCI_3501
-	{"apci3501",
-			APCI3501_BOARD_VENDOR_ID,
-			0x3001,
-			64,
-			APCI3501_ADDRESS_RANGE,
-			0,
-			0,
-			ADDIDATA_EEPROM,
-			ADDIDATA_S5933,
-			0,
-			0,
-			0,
-			8,
-			0,
-			16383,
-			NULL,
-			&range_apci3501_ao,
-			2,
-			2,
-			0x3,
-			0,
-			NULL,
-			0,
-			1,
-			0,
-			0,
-			0,
-			v_APCI3501_Interrupt,
-			i_APCI3501_Reset,
-			NULL, NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3501_ConfigAnalogOutput,
-			i_APCI3501_WriteAnalogOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3501_ReadDigitalInput,
-			i_APCI3501_ConfigDigitalOutput,
-			i_APCI3501_WriteDigitalOutput,
-			i_APCI3501_ReadDigitalOutput,
-			NULL,
-			i_APCI3501_ConfigTimerCounterWatchdog,
-			i_APCI3501_StartStopWriteTimerCounterWatchdog,
-			i_APCI3501_ReadTimerCounterWatchdog,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci3501",
+		.i_VendorId		= APCI3501_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x3001,
+		.i_IorangeBase0		= 64,
+		.i_IorangeBase1		= APCI3501_ADDRESS_RANGE,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5933,
+		.i_AoMaxdata		= 16383,
+		.pr_AoRangelist		= &range_apci3501_ao,
+		.i_NbrDiChannel		= 2,
+		.i_NbrDoChannel		= 2,
+		.i_DoMaxdata		= 0x3,
+		.i_Timer		= 1,
+		.interrupt		= v_APCI3501_Interrupt,
+		.reset			= i_APCI3501_Reset,
+		.ao_config		= i_APCI3501_ConfigAnalogOutput,
+		.ao_write		= i_APCI3501_WriteAnalogOutput,
+		.di_bits		= i_APCI3501_ReadDigitalInput,
+		.do_config		= i_APCI3501_ConfigDigitalOutput,
+		.do_write		= i_APCI3501_WriteDigitalOutput,
+		.do_bits		= i_APCI3501_ReadDigitalOutput,
+		.timer_config		= i_APCI3501_ConfigTimerCounterWatchdog,
+		.timer_write		= i_APCI3501_StartStopWriteTimerCounterWatchdog,
+		.timer_read		= i_APCI3501_ReadTimerCounterWatchdog,
+	},
 #endif
 #ifdef CONFIG_APCI_035
-	{"apci035",
-			APCI035_BOARD_VENDOR_ID,
-			0x0300,
-			127,
-			APCI035_ADDRESS_RANGE,
-			0,
-			0,
-			1,
-			ADDIDATA_S5920,
-			16,
-			8,
-			16,
-			0,
-			0xff,
-			0,
-			&range_apci035_ai,
-			NULL,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			0,
-			1,
-			0,
-			10000,
-			100000,
-			v_APCI035_Interrupt,
-			i_APCI035_Reset,
-			i_APCI035_ConfigAnalogInput,
-			i_APCI035_ReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI035_ConfigTimerWatchdog,
-			i_APCI035_StartStopWriteTimerWatchdog,
-			i_APCI035_ReadTimerWatchdog,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci035",
+		.i_VendorId		= APCI035_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x0300,
+		.i_IorangeBase0		= 127,
+		.i_IorangeBase1		= APCI035_ADDRESS_RANGE,
+		.i_PCIEeprom		= 1,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 0xff,
+		.pr_AiRangelist		= &range_apci035_ai,
+		.i_Timer		= 1,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.ui_MinDelaytimeNs	= 100000,
+		.interrupt		= v_APCI035_Interrupt,
+		.reset			= i_APCI035_Reset,
+		.ai_config		= i_APCI035_ConfigAnalogInput,
+		.ai_read		= i_APCI035_ReadAnalogInput,
+		.timer_config		= i_APCI035_ConfigTimerWatchdog,
+		.timer_write		= i_APCI035_StartStopWriteTimerWatchdog,
+		.timer_read		= i_APCI035_ReadTimerWatchdog,
+	},
 #endif
 #ifdef CONFIG_APCI_3200
-	{"apci3200",
-			APCI3200_BOARD_VENDOR_ID,
-			0x3000,
-			128,
-			256,
-			4,
-			4,
-			ADDIDATA_EEPROM,
-			ADDIDATA_S5920,
-			16,
-			8,
-			16,
-			0,
-			0x3ffff,
-			0,
-			&range_apci3200_ai,
-			NULL,
-			4,
-			4,
-			0,
-			0,
-			NULL,
-			0,
-			0,
-			0,
-			10000,
-			100000,
-			v_APCI3200_Interrupt,
-			i_APCI3200_Reset,
-			i_APCI3200_ConfigAnalogInput,
-			i_APCI3200_ReadAnalogInput,
-			i_APCI3200_InsnWriteReleaseAnalogInput,
-			i_APCI3200_InsnBits_AnalogInput_Test,
-			i_APCI3200_CommandTestAnalogInput,
-			i_APCI3200_CommandAnalogInput,
-			i_APCI3200_StopCyclicAcquisition,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3200_ReadDigitalInput,
-			i_APCI3200_ConfigDigitalOutput,
-			i_APCI3200_WriteDigitalOutput,
-			i_APCI3200_ReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci3200",
+		.i_VendorId		= APCI3200_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x3000,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 4,
+		.i_IorangeBase3		= 4,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 0x3ffff,
+		.pr_AiRangelist		= &range_apci3200_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.ui_MinDelaytimeNs	= 100000,
+		.interrupt		= v_APCI3200_Interrupt,
+		.reset			= i_APCI3200_Reset,
+		.ai_config		= i_APCI3200_ConfigAnalogInput,
+		.ai_read		= i_APCI3200_ReadAnalogInput,
+		.ai_write		= i_APCI3200_InsnWriteReleaseAnalogInput,
+		.ai_bits		= i_APCI3200_InsnBits_AnalogInput_Test,
+		.ai_cmdtest		= i_APCI3200_CommandTestAnalogInput,
+		.ai_cmd			= i_APCI3200_CommandAnalogInput,
+		.ai_cancel		= i_APCI3200_StopCyclicAcquisition,
+		.di_bits		= i_APCI3200_ReadDigitalInput,
+		.do_config		= i_APCI3200_ConfigDigitalOutput,
+		.do_write		= i_APCI3200_WriteDigitalOutput,
+		.do_bits		= i_APCI3200_ReadDigitalOutput,
+	},
 #endif
 #ifdef CONFIG_APCI_3300
 	/* Begin JK	.20.10.2004 = APCI-3300 integration */
-	{"apci3300",
-			APCI3200_BOARD_VENDOR_ID,
-			0x3007,
-			128,
-			256,
-			4,
-			4,
-			ADDIDATA_EEPROM,
-			ADDIDATA_S5920,
-			0,
-			8,
-			8,
-			0,
-			0x3ffff,
-			0,
-			&range_apci3300_ai,
-			NULL,
-			4,
-			4,
-			0,
-			0,
-			NULL,
-			0,
-			0,
-			0,
-			10000,
-			100000,
-			v_APCI3200_Interrupt,
-			i_APCI3200_Reset,
-			i_APCI3200_ConfigAnalogInput,
-			i_APCI3200_ReadAnalogInput,
-			i_APCI3200_InsnWriteReleaseAnalogInput,
-			i_APCI3200_InsnBits_AnalogInput_Test,
-			i_APCI3200_CommandTestAnalogInput,
-			i_APCI3200_CommandAnalogInput,
-			i_APCI3200_StopCyclicAcquisition,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3200_ReadDigitalInput,
-			i_APCI3200_ConfigDigitalOutput,
-			i_APCI3200_WriteDigitalOutput,
-			i_APCI3200_ReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci3300",
+		.i_VendorId		= APCI3200_BOARD_VENDOR_ID,
+		.i_DeviceId		= 0x3007,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 4,
+		.i_IorangeBase3		= 4,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 8,
+		.i_AiMaxdata		= 0x3ffff,
+		.pr_AiRangelist		= &range_apci3300_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.ui_MinDelaytimeNs	= 100000,
+		.interrupt		= v_APCI3200_Interrupt,
+		.reset			= i_APCI3200_Reset,
+		.ai_config		= i_APCI3200_ConfigAnalogInput,
+		.ai_read		= i_APCI3200_ReadAnalogInput,
+		.ai_write		= i_APCI3200_InsnWriteReleaseAnalogInput,
+		.ai_bits		= i_APCI3200_InsnBits_AnalogInput_Test,
+		.ai_cmdtest		= i_APCI3200_CommandTestAnalogInput,
+		.ai_cmd			= i_APCI3200_CommandAnalogInput,
+		.ai_cancel		= i_APCI3200_StopCyclicAcquisition,
+		.di_bits		= i_APCI3200_ReadDigitalInput,
+		.do_config		= i_APCI3200_ConfigDigitalOutput,
+		.do_write		= i_APCI3200_WriteDigitalOutput,
+		.do_bits		= i_APCI3200_ReadDigitalOutput,
+	},
 #endif
 #ifdef CONFIG_APCI_1710
-	{"apci1710", APCI1710_BOARD_VENDOR_ID, APCI1710_BOARD_DEVICE_ID,
-			128,
-			8,
-			256,
-			0,
-			ADDIDATA_NO_EEPROM,
-			NULL,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			NULL,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			0,
-			0,
-			0,
-			0,
-			0,
-			v_APCI1710_Interrupt,
-			i_APCI1710_Reset,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
+	{
+		.pc_DriverName		= "apci1710",
+		.i_VendorId		= APCI1710_BOARD_VENDOR_ID,
+		.i_DeviceId		= APCI1710_BOARD_DEVICE_ID,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= 8,
+		.i_IorangeBase2		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.interrupt		= v_APCI1710_Interrupt,
+		.reset			= i_APCI1710_Reset,
+	},
 #endif
 #ifdef CONFIG_APCI_16XX
-	{"apci1648",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x1009,
-			128,
-			0,
-			0,
-			0,
-			ADDIDATA_NO_EEPROM,
-			NULL,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			NULL,
-			0,
-			0,
-			0,
-			48,
-			&range_apci16xx_ttl,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			i_APCI16XX_Reset,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI16XX_InsnConfigInitTTLIO,
-			i_APCI16XX_InsnBitsReadTTLIO,
-			i_APCI16XX_InsnReadTTLIOAllPortValue,
-		i_APCI16XX_InsnBitsWriteTTLIO},
-
-	{"apci1696",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x100A,
-			128,
-			0,
-			0,
-			0,
-			ADDIDATA_NO_EEPROM,
-			NULL,
-			0,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			NULL,
-			0,
-			0,
-			0,
-			96,
-			&range_apci16xx_ttl,
-			0,
-			0,
-			0,
-			0,
-			0,
-			NULL,
-			i_APCI16XX_Reset,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI16XX_InsnConfigInitTTLIO,
-			i_APCI16XX_InsnBitsReadTTLIO,
-			i_APCI16XX_InsnReadTTLIOAllPortValue,
-		i_APCI16XX_InsnBitsWriteTTLIO},
+	{
+		.pc_DriverName		= "apci1648",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x1009,
+		.i_IorangeBase0		= 128,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.i_NbrTTLChannel	= 48,
+		.pr_TTLRangelist	= &range_apci16xx_ttl,
+		.reset			= i_APCI16XX_Reset,
+		.ttl_config		= i_APCI16XX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI16XX_InsnBitsReadTTLIO,
+		.ttl_read		= i_APCI16XX_InsnReadTTLIOAllPortValue,
+		.ttl_write		= i_APCI16XX_InsnBitsWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci1696",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x100A,
+		.i_IorangeBase0		= 128,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.i_NbrTTLChannel	= 96,
+		.pr_TTLRangelist	= &range_apci16xx_ttl,
+		.reset			= i_APCI16XX_Reset,
+		.ttl_config		= i_APCI16XX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI16XX_InsnBitsReadTTLIO,
+		.ttl_read		= i_APCI16XX_InsnReadTTLIOAllPortValue,
+		.ttl_write		= i_APCI16XX_InsnBitsWriteTTLIO,
+	},
 #endif
 #ifdef CONFIG_APCI_3XXX
-	{"apci3000-16",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3010,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			16,
-			8,
-			16,
-			0,
-			4095,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			10000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3000-8",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x300F,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			8,
-			4,
-			8,
-			0,
-			4095,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			10000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3000-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x300E,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			4,
-			2,
-			4,
-			0,
-			4095,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			10000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3006-16",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3013,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			16,
-			8,
-			16,
-			0,
-			65535,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			10000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3006-8",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3014,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			8,
-			4,
-			8,
-			0,
-			65535,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			10000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3006-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3015,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			4,
-			2,
-			4,
-			0,
-			65535,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			10000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3010-16",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3016,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			16,
-			8,
-			16,
-			0,
-			4095,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			4,
-			4,
-			1,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3010-8",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3017,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			8,
-			4,
-			8,
-			0,
-			4095,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			4,
-			4,
-			1,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3010-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3018,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			4,
-			2,
-			4,
-			0,
-			4095,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			4,
-			4,
-			1,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3016-16",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3019,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			16,
-			8,
-			16,
-			0,
-			65535,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			4,
-			4,
-			1,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3016-8",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x301A,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			8,
-			4,
-			8,
-			0,
-			65535,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			4,
-			4,
-			1,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3016-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x301B,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			4,
-			2,
-			4,
-			0,
-			65535,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			4,
-			4,
-			1,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3100-16-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x301C,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			16,
-			8,
-			16,
-			4,
-			4095,
-			4095,
-			&range_apci3XXX_ai,
-			&range_apci3XXX_ao,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			10000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnWriteAnalogOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3100-8-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x301D,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			8,
-			4,
-			8,
-			4,
-			4095,
-			4095,
-			&range_apci3XXX_ai,
-			&range_apci3XXX_ao,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			10000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnWriteAnalogOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3106-16-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x301E,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			16,
-			8,
-			16,
-			4,
-			65535,
-			4095,
-			&range_apci3XXX_ai,
-			&range_apci3XXX_ao,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			10000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnWriteAnalogOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3106-8-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x301F,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			8,
-			4,
-			8,
-			4,
-			65535,
-			4095,
-			&range_apci3XXX_ai,
-			&range_apci3XXX_ao,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			10000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnWriteAnalogOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3110-16-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3020,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			16,
-			8,
-			16,
-			4,
-			4095,
-			4095,
-			&range_apci3XXX_ai,
-			&range_apci3XXX_ao,
-			4,
-			4,
-			1,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnWriteAnalogOutput,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3110-8-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3021,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			8,
-			4,
-			8,
-			4,
-			4095,
-			4095,
-			&range_apci3XXX_ai,
-			&range_apci3XXX_ao,
-			4,
-			4,
-			1,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnWriteAnalogOutput,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3116-16-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3022,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			16,
-			8,
-			16,
-			4,
-			65535,
-			4095,
-			&range_apci3XXX_ai,
-			&range_apci3XXX_ao,
-			4,
-			4,
-			1,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnWriteAnalogOutput,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3116-8-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3023,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			8,
-			4,
-			8,
-			4,
-			65535,
-			4095,
-			&range_apci3XXX_ai,
-			&range_apci3XXX_ao,
-			4,
-			4,
-			1,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnWriteAnalogOutput,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
-
-	{"apci3003",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x300B,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			0,
-			4,
-			4,
-			0,
-			65535,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			4,
-			4,
-			1,
-			0,
-			NULL,
-			0,
-			0,
-			7,
-			2500,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
-
-	{"apci3002-16",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3002,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			0,
-			16,
-			16,
-			0,
-			65535,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			4,
-			4,
-			1,
-			0,
-			NULL,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
-
-	{"apci3002-8",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3003,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			0,
-			8,
-			8,
-			0,
-			65535,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			4,
-			4,
-			1,
-			0,
-			NULL,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
-
-	{"apci3002-4",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3004,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			0,
-			4,
-			4,
-			0,
-			65535,
-			0,
-			&range_apci3XXX_ai,
-			NULL,
-			4,
-			4,
-			1,
-			0,
-			NULL,
-			0,
-			0,
-			6,
-			5000,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			i_APCI3XXX_InsnConfigAnalogInput,
-			i_APCI3XXX_InsnReadAnalogInput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnReadDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnBitsDigitalInput,
-			NULL,
-			i_APCI3XXX_InsnWriteDigitalOutput,
-			i_APCI3XXX_InsnBitsDigitalOutput,
-			i_APCI3XXX_InsnReadDigitalOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-		NULL},
-
-	{"apci3500",
-			PCI_VENDOR_ID_ADDIDATA,
-			0x3024,
-			256,
-			256,
-			256,
-			256,
-			ADDIDATA_NO_EEPROM,
-			ADDIDATA_9054,
-			0,
-			0,
-			0,
-			4,
-			0,
-			4095,
-			NULL,
-			&range_apci3XXX_ao,
-			0,
-			0,
-			0,
-			24,
-			&range_apci3XXX_ttl,
-			0,
-			0,
-			0,
-			0,
-			0,
-			v_APCI3XXX_Interrupt,
-			i_APCI3XXX_Reset,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnWriteAnalogOutput,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			NULL,
-			i_APCI3XXX_InsnConfigInitTTLIO,
-			i_APCI3XXX_InsnBitsTTLIO,
-			i_APCI3XXX_InsnReadTTLIO,
-		i_APCI3XXX_InsnWriteTTLIO},
+	{
+		.pc_DriverName		= "apci3000-16",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3010,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3000-8",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x300F,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 8,
+		.i_NbrAiChannelDiff	= 4,
+		.i_AiChannelList	= 8,
+		.i_AiMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3000-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x300E,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 4,
+		.i_NbrAiChannelDiff	= 2,
+		.i_AiChannelList	= 4,
+		.i_AiMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3006-16",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3013,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 65535,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3006-8",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3014,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 8,
+		.i_NbrAiChannelDiff	= 4,
+		.i_AiChannelList	= 8,
+		.i_AiMaxdata		= 65535,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3006-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3015,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 4,
+		.i_NbrAiChannelDiff	= 2,
+		.i_AiChannelList	= 4,
+		.i_AiMaxdata		= 65535,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3010-16",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3016,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3010-8",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3017,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 8,
+		.i_NbrAiChannelDiff	= 4,
+		.i_AiChannelList	= 8,
+		.i_AiMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3010-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3018,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 4,
+		.i_NbrAiChannelDiff	= 2,
+		.i_AiChannelList	= 4,
+		.i_AiMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3016-16",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3019,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 65535,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3016-8",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x301A,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 8,
+		.i_NbrAiChannelDiff	= 4,
+		.i_AiChannelList	= 8,
+		.i_AiMaxdata		= 65535,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3016-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x301B,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 4,
+		.i_NbrAiChannelDiff	= 2,
+		.i_AiChannelList	= 4,
+		.i_AiMaxdata		= 65535,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3100-16-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x301C,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_NbrAoChannel		= 4,
+		.i_AiMaxdata		= 4095,
+		.i_AoMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.pr_AoRangelist		= &range_apci3XXX_ao,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ao_write		= i_APCI3XXX_InsnWriteAnalogOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3100-8-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x301D,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 8,
+		.i_NbrAiChannelDiff	= 4,
+		.i_AiChannelList	= 8,
+		.i_NbrAoChannel		= 4,
+		.i_AiMaxdata		= 4095,
+		.i_AoMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.pr_AoRangelist		= &range_apci3XXX_ao,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ao_write		= i_APCI3XXX_InsnWriteAnalogOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3106-16-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x301E,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_NbrAoChannel		= 4,
+		.i_AiMaxdata		= 65535,
+		.i_AoMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.pr_AoRangelist		= &range_apci3XXX_ao,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ao_write		= i_APCI3XXX_InsnWriteAnalogOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3106-8-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x301F,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 8,
+		.i_NbrAiChannelDiff	= 4,
+		.i_AiChannelList	= 8,
+		.i_NbrAoChannel		= 4,
+		.i_AiMaxdata		= 65535,
+		.i_AoMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.pr_AoRangelist		= &range_apci3XXX_ao,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ao_write		= i_APCI3XXX_InsnWriteAnalogOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3110-16-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3020,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_NbrAoChannel		= 4,
+		.i_AiMaxdata		= 4095,
+		.i_AoMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.pr_AoRangelist		= &range_apci3XXX_ao,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ao_write		= i_APCI3XXX_InsnWriteAnalogOutput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3110-8-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3021,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 8,
+		.i_NbrAiChannelDiff	= 4,
+		.i_AiChannelList	= 8,
+		.i_NbrAoChannel		= 4,
+		.i_AiMaxdata		= 4095,
+		.i_AoMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.pr_AoRangelist		= &range_apci3XXX_ao,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ao_write		= i_APCI3XXX_InsnWriteAnalogOutput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3116-16-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3022,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_NbrAoChannel		= 4,
+		.i_AiMaxdata		= 65535,
+		.i_AoMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.pr_AoRangelist		= &range_apci3XXX_ao,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ao_write		= i_APCI3XXX_InsnWriteAnalogOutput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3116-8-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3023,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannel		= 8,
+		.i_NbrAiChannelDiff	= 4,
+		.i_AiChannelList	= 8,
+		.i_NbrAoChannel		= 4,
+		.i_AiMaxdata		= 65535,
+		.i_AoMaxdata		= 4095,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.pr_AoRangelist		= &range_apci3XXX_ao,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.ao_write		= i_APCI3XXX_InsnWriteAnalogOutput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci3003",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x300B,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannelDiff	= 4,
+		.i_AiChannelList	= 4,
+		.i_AiMaxdata		= 65535,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.b_AvailableConvertUnit	= 7,
+		.ui_MinAcquisitiontimeNs = 2500,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+	}, {
+		.pc_DriverName		= "apci3002-16",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3002,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannelDiff	= 16,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 65535,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+	}, {
+		.pc_DriverName		= "apci3002-8",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3003,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 8,
+		.i_AiMaxdata		= 65535,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+	}, {
+		.pc_DriverName		= "apci3002-4",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3004,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAiChannelDiff	= 4,
+		.i_AiChannelList	= 4,
+		.i_AiMaxdata		= 65535,
+		.pr_AiRangelist		= &range_apci3XXX_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 1,
+		.b_AvailableConvertUnit	= 6,
+		.ui_MinAcquisitiontimeNs = 5000,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ai_config		= i_APCI3XXX_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3XXX_InsnReadAnalogInput,
+		.di_read		= i_APCI3XXX_InsnReadDigitalInput,
+		.di_bits		= i_APCI3XXX_InsnBitsDigitalInput,
+		.do_write		= i_APCI3XXX_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3XXX_InsnBitsDigitalOutput,
+		.do_read		= i_APCI3XXX_InsnReadDigitalOutput,
+	}, {
+		.pc_DriverName		= "apci3500",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3024,
+		.i_IorangeBase0		= 256,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 256,
+		.i_IorangeBase3		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.pc_EepromChip		= ADDIDATA_9054,
+		.i_NbrAoChannel		= 4,
+		.i_AoMaxdata		= 4095,
+		.pr_AoRangelist		= &range_apci3XXX_ao,
+		.i_NbrTTLChannel	= 24,
+		.pr_TTLRangelist	= &range_apci3XXX_ttl,
+		.interrupt		= v_APCI3XXX_Interrupt,
+		.reset			= i_APCI3XXX_Reset,
+		.ao_write		= i_APCI3XXX_InsnWriteAnalogOutput,
+		.ttl_config		= i_APCI3XXX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI3XXX_InsnBitsTTLIO,
+		.ttl_read		= i_APCI3XXX_InsnReadTTLIO,
+		.ttl_write		= i_APCI3XXX_InsnWriteTTLIO,
+	},
 #endif
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct addi_board))
-
 static struct comedi_driver driver_addi = {
 	.driver_name = ADDIDATA_DRIVER_NAME,
 	.module = THIS_MODULE,
 	.attach = i_ADDI_Attach,
 	.detach = i_ADDI_Detach,
-	.num_names = n_boardtypes,
+	.num_names = ARRAY_SIZE(boardtypes),
 	.board_name = &boardtypes[0].pc_DriverName,
 	.offset = sizeof(struct addi_board),
 };
@@ -2543,7 +1438,7 @@ static struct comedi_driver driver_addi = {
 static int __devinit driver_addi_pci_probe(struct pci_dev *dev,
 					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_addi.driver_name);
+	return comedi_pci_auto_config(dev, &driver_addi);
 }
 
 static void __devexit driver_addi_pci_remove(struct pci_dev *dev)
@@ -2821,16 +1716,13 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			/* Set the initialisation flag */
 			devpriv->b_AiInitialisation = 1;
 
-			s->insn_config =
-				this_board->i_hwdrv_InsnConfigAnalogInput;
-			s->insn_read = this_board->i_hwdrv_InsnReadAnalogInput;
-			s->insn_write =
-				this_board->i_hwdrv_InsnWriteAnalogInput;
-			s->insn_bits = this_board->i_hwdrv_InsnBitsAnalogInput;
-			s->do_cmdtest =
-				this_board->i_hwdrv_CommandTestAnalogInput;
-			s->do_cmd = this_board->i_hwdrv_CommandAnalogInput;
-			s->cancel = this_board->i_hwdrv_CancelAnalogInput;
+			s->insn_config = this_board->ai_config;
+			s->insn_read = this_board->ai_read;
+			s->insn_write = this_board->ai_write;
+			s->insn_bits = this_board->ai_bits;
+			s->do_cmdtest = this_board->ai_cmdtest;
+			s->do_cmd = this_board->ai_cmd;
+			s->cancel = this_board->ai_cancel;
 
 		} else {
 			s->type = COMEDI_SUBD_UNUSED;
@@ -2846,10 +1738,8 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			s->len_chanlist =
 				devpriv->s_EeParameters.i_NbrAoChannel;
 			s->range_table = this_board->pr_AoRangelist;
-			s->insn_config =
-				this_board->i_hwdrv_InsnConfigAnalogOutput;
-			s->insn_write =
-				this_board->i_hwdrv_InsnWriteAnalogOutput;
+			s->insn_config = this_board->ao_config;
+			s->insn_write = this_board->ao_write;
 		} else {
 			s->type = COMEDI_SUBD_UNUSED;
 		}
@@ -2864,12 +1754,10 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 				devpriv->s_EeParameters.i_NbrDiChannel;
 			s->range_table = &range_digital;
 			s->io_bits = 0;	/* all bits input */
-			s->insn_config =
-				this_board->i_hwdrv_InsnConfigDigitalInput;
-			s->insn_read = this_board->i_hwdrv_InsnReadDigitalInput;
-			s->insn_write =
-				this_board->i_hwdrv_InsnWriteDigitalInput;
-			s->insn_bits = this_board->i_hwdrv_InsnBitsDigitalInput;
+			s->insn_config = this_board->di_config;
+			s->insn_read = this_board->di_read;
+			s->insn_write = this_board->di_write;
+			s->insn_bits = this_board->di_bits;
 		} else {
 			s->type = COMEDI_SUBD_UNUSED;
 		}
@@ -2886,13 +1774,11 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			s->range_table = &range_digital;
 			s->io_bits = 0xf;	/* all bits output */
 
-			s->insn_config = this_board->i_hwdrv_InsnConfigDigitalOutput;	/* for digital output memory.. */
-			s->insn_write =
-				this_board->i_hwdrv_InsnWriteDigitalOutput;
-			s->insn_bits =
-				this_board->i_hwdrv_InsnBitsDigitalOutput;
-			s->insn_read =
-				this_board->i_hwdrv_InsnReadDigitalOutput;
+			/* insn_config - for digital output memory */
+			s->insn_config = this_board->do_config;
+			s->insn_write = this_board->do_write;
+			s->insn_bits = this_board->do_bits;
+			s->insn_read = this_board->do_read;
 		} else {
 			s->type = COMEDI_SUBD_UNUSED;
 		}
@@ -2907,10 +1793,10 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			s->len_chanlist = 1;
 			s->range_table = &range_digital;
 
-			s->insn_write = this_board->i_hwdrv_InsnWriteTimer;
-			s->insn_read = this_board->i_hwdrv_InsnReadTimer;
-			s->insn_config = this_board->i_hwdrv_InsnConfigTimer;
-			s->insn_bits = this_board->i_hwdrv_InsnBitsTimer;
+			s->insn_write = this_board->timer_write;
+			s->insn_read = this_board->timer_read;
+			s->insn_config = this_board->timer_config;
+			s->insn_bits = this_board->timer_bits;
 		} else {
 			s->type = COMEDI_SUBD_UNUSED;
 		}
@@ -2926,10 +1812,10 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			s->io_bits = 0;	/* all bits input */
 			s->len_chanlist = this_board->i_NbrTTLChannel;
 			s->range_table = &range_digital;
-			s->insn_config = this_board->i_hwdr_ConfigInitTTLIO;
-			s->insn_bits = this_board->i_hwdr_ReadTTLIOBits;
-			s->insn_read = this_board->i_hwdr_ReadTTLIOAllPortValue;
-			s->insn_write = this_board->i_hwdr_WriteTTLIOChlOnOff;
+			s->insn_config = this_board->ttl_config;
+			s->insn_bits = this_board->ttl_bits;
+			s->insn_read = this_board->ttl_read;
+			s->insn_write = this_board->ttl_write;
 		} else {
 			s->type = COMEDI_SUBD_UNUSED;
 		}
@@ -2953,50 +1839,22 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-/*
-+----------------------------------------------------------------------------+
-| Function name     : static int i_ADDI_Detach(struct comedi_device *dev)           |
-|                                        									 |
-|                                            						         |
-+----------------------------------------------------------------------------+
-| Task              : Deallocates resources of the addi_common driver        |
-|			  Free the DMA buffers, unregister irq.				     |
-|                     										                 |
-+----------------------------------------------------------------------------+
-| Input Parameters  : struct comedi_device *dev									 |
-|                     														 |
-|                                                 					         |
-+----------------------------------------------------------------------------+
-| Return Value      : 0             					                     |
-|                    													     |
-+----------------------------------------------------------------------------+
-*/
-
-static int i_ADDI_Detach(struct comedi_device *dev)
+static void i_ADDI_Detach(struct comedi_device *dev)
 {
-
 	if (dev->private) {
-		if (devpriv->b_ValidDriver) {
+		if (devpriv->b_ValidDriver)
 			i_ADDI_Reset(dev);
-		}
-
-		if (dev->irq) {
+		if (dev->irq)
 			free_irq(dev->irq, dev);
-		}
-
-		if ((this_board->pc_EepromChip == NULL)
-			|| (strcmp(this_board->pc_EepromChip,
-					ADDIDATA_9054) != 0)) {
-			if (devpriv->allocated) {
+		if ((this_board->pc_EepromChip == NULL) ||
+		    (strcmp(this_board->pc_EepromChip, ADDIDATA_9054) != 0)) {
+			if (devpriv->allocated)
 				i_pci_card_free(devpriv->amcc);
-			}
-
 			if (devpriv->ul_DmaBufferVirtual[0]) {
 				free_pages((unsigned long)devpriv->
 					ul_DmaBufferVirtual[0],
 					devpriv->ui_DmaBufferPages[0]);
 			}
-
 			if (devpriv->ul_DmaBufferVirtual[1]) {
 				free_pages((unsigned long)devpriv->
 					ul_DmaBufferVirtual[1],
@@ -3004,20 +1862,14 @@ static int i_ADDI_Detach(struct comedi_device *dev)
 			}
 		} else {
 			iounmap(devpriv->dw_AiBase);
-
-			if (devpriv->allocated) {
+			if (devpriv->allocated)
 				i_pci_card_free(devpriv->amcc);
-			}
 		}
-
 		if (pci_list_builded) {
-			/* v_pci_card_list_cleanup(PCI_VENDOR_ID_AMCC); */
 			v_pci_card_list_cleanup(this_board->i_VendorId);
 			pci_list_builded = 0;
 		}
 	}
-
-	return 0;
 }
 
 /*
@@ -3041,7 +1893,7 @@ static int i_ADDI_Detach(struct comedi_device *dev)
 static int i_ADDI_Reset(struct comedi_device *dev)
 {
 
-	this_board->i_hwdrv_Reset(dev);
+	this_board->reset(dev);
 	return 0;
 }
 
@@ -3067,7 +1919,7 @@ static int i_ADDI_Reset(struct comedi_device *dev)
 static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
 {
 	struct comedi_device *dev = d;
-	this_board->v_hwdrv_Interrupt(irq, d);
+	this_board->interrupt(irq, d);
 	return IRQ_RETVAL(1);
 }
 
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.h b/drivers/staging/comedi/drivers/addi-data/addi_common.h
index c6980b7dfea0..2c3f34703dd2 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.h
@@ -94,111 +94,72 @@ struct addi_board {
 	unsigned int ui_MinDelaytimeNs;	/*  Minimum Delay in Nano secs */
 
 	/* interrupt and reset */
-	void (*v_hwdrv_Interrupt)(int irq, void *d);
-	int (*i_hwdrv_Reset)(struct comedi_device *dev);
+	void (*interrupt)(int irq, void *d);
+	int (*reset)(struct comedi_device *);
 
 	/* Subdevice functions */
 
 	/* ANALOG INPUT */
-	int (*i_hwdrv_InsnConfigAnalogInput)(struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
-	int (*i_hwdrv_InsnReadAnalogInput)(struct comedi_device *dev,
-					    struct comedi_subdevice *s,
-					    struct comedi_insn *insn,
-					    unsigned int *data);
-	int (*i_hwdrv_InsnWriteAnalogInput)(struct comedi_device *dev,
-					    struct comedi_subdevice *s,
-					    struct comedi_insn *insn,
-					    unsigned int *data);
-	int (*i_hwdrv_InsnBitsAnalogInput)(struct comedi_device *dev,
-					   struct comedi_subdevice *s,
-					   struct comedi_insn *insn,
-					   unsigned int *data);
-	int (*i_hwdrv_CommandTestAnalogInput)(struct comedi_device *dev,
-					      struct comedi_subdevice *s,
-					      struct comedi_cmd *cmd);
-	int (*i_hwdrv_CommandAnalogInput)(struct comedi_device *dev,
-					  struct comedi_subdevice *s);
-	int (*i_hwdrv_CancelAnalogInput)(struct comedi_device *dev,
-					 struct comedi_subdevice *s);
+	int (*ai_config)(struct comedi_device *, struct comedi_subdevice *,
+			 struct comedi_insn *, unsigned int *);
+	int (*ai_read)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
+	int (*ai_write)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*ai_bits)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
+	int (*ai_cmdtest)(struct comedi_device *, struct comedi_subdevice *,
+			  struct comedi_cmd *);
+	int (*ai_cmd)(struct comedi_device *, struct comedi_subdevice *);
+	int (*ai_cancel)(struct comedi_device *, struct comedi_subdevice *);
 
 	/* Analog Output */
-	int (*i_hwdrv_InsnConfigAnalogOutput)(struct comedi_device *dev,
-					      struct comedi_subdevice *s,
-					      struct comedi_insn *insn,
-					      unsigned int *data);
-	int (*i_hwdrv_InsnWriteAnalogOutput)(struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
-	int (*i_hwdrv_InsnBitsAnalogOutput)(struct comedi_device *dev,
-					    struct comedi_subdevice *s,
-					    struct comedi_insn *insn,
-					    unsigned int *data);
+	int (*ao_config)(struct comedi_device *, struct comedi_subdevice *,
+			 struct comedi_insn *, unsigned int *);
+	int (*ao_write)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*ao_bits)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
 
 	/* Digital Input */
-	int (*i_hwdrv_InsnConfigDigitalInput) (struct comedi_device *dev,
-					       struct comedi_subdevice *s,
-					       struct comedi_insn *insn,
-					       unsigned int *data);
-	int (*i_hwdrv_InsnReadDigitalInput) (struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
-	int (*i_hwdrv_InsnWriteDigitalInput) (struct comedi_device *dev,
-					      struct comedi_subdevice *s,
-					      struct comedi_insn *insn,
-					      unsigned int *data);
-	int (*i_hwdrv_InsnBitsDigitalInput) (struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
+	int (*di_config)(struct comedi_device *, struct comedi_subdevice *,
+			 struct comedi_insn *, unsigned int *);
+	int (*di_read)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
+	int (*di_write)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*di_bits)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
 
 	/* Digital Output */
-	int (*i_hwdrv_InsnConfigDigitalOutput)(struct comedi_device *dev,
-					       struct comedi_subdevice *s,
-					       struct comedi_insn *insn,
-					       unsigned int *data);
-	int (*i_hwdrv_InsnWriteDigitalOutput)(struct comedi_device *dev,
-					      struct comedi_subdevice *s,
-					      struct comedi_insn *insn,
-					      unsigned int *data);
-	int (*i_hwdrv_InsnBitsDigitalOutput)(struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
-	int (*i_hwdrv_InsnReadDigitalOutput)(struct comedi_device *dev,
-					     struct comedi_subdevice *s,
-					     struct comedi_insn *insn,
-					     unsigned int *data);
+	int (*do_config)(struct comedi_device *, struct comedi_subdevice *,
+			 struct comedi_insn *, unsigned int *);
+	int (*do_write)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*do_bits)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
+	int (*do_read)(struct comedi_device *, struct comedi_subdevice *,
+		       struct comedi_insn *, unsigned int *);
 
 	/* TIMER */
-	int (*i_hwdrv_InsnConfigTimer)(struct comedi_device *dev,
-				       struct comedi_subdevice *s,
-				       struct comedi_insn *insn, unsigned int *data);
-	int (*i_hwdrv_InsnWriteTimer)(struct comedi_device *dev,
-				      struct comedi_subdevice *s, struct comedi_insn *insn,
-				      unsigned int *data);
-	int (*i_hwdrv_InsnReadTimer)(struct comedi_device *dev, struct comedi_subdevice *s,
-				     struct comedi_insn *insn, unsigned int *data);
-	int (*i_hwdrv_InsnBitsTimer)(struct comedi_device *dev, struct comedi_subdevice *s,
-				     struct comedi_insn *insn, unsigned int *data);
+	int (*timer_config)(struct comedi_device *, struct comedi_subdevice *,
+			    struct comedi_insn *, unsigned int *);
+	int (*timer_write)(struct comedi_device *, struct comedi_subdevice *,
+			   struct comedi_insn *, unsigned int *);
+	int (*timer_read)(struct comedi_device *, struct comedi_subdevice *,
+			  struct comedi_insn *, unsigned int *);
+	int (*timer_bits)(struct comedi_device *, struct comedi_subdevice *,
+			  struct comedi_insn *, unsigned int *);
 
 	/* TTL IO */
-	int (*i_hwdr_ConfigInitTTLIO)(struct comedi_device *dev,
-				      struct comedi_subdevice *s, struct comedi_insn *insn,
-				      unsigned int *data);
-	int (*i_hwdr_ReadTTLIOBits)(struct comedi_device *dev, struct comedi_subdevice *s,
-				    struct comedi_insn *insn, unsigned int *data);
-	int (*i_hwdr_ReadTTLIOAllPortValue)(struct comedi_device *dev,
-					    struct comedi_subdevice *s,
-					    struct comedi_insn *insn,
-					    unsigned int *data);
-	int (*i_hwdr_WriteTTLIOChlOnOff)(struct comedi_device *dev,
-					 struct comedi_subdevice *s,
-					 struct comedi_insn *insn, unsigned int *data);
+	int (*ttl_config)(struct comedi_device *, struct comedi_subdevice *,
+			  struct comedi_insn *, unsigned int *);
+	int (*ttl_bits)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*ttl_read)(struct comedi_device *, struct comedi_subdevice *,
+			struct comedi_insn *, unsigned int *);
+	int (*ttl_write)(struct comedi_device *, struct comedi_subdevice *,
+			 struct comedi_insn *, unsigned int *);
 };
 
 /* MODULE INFO STRUCTURE */
@@ -455,7 +416,7 @@ static unsigned short pci_list_builded;	/* set to 1 when list of card is known *
 
 /* Function declarations */
 static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int i_ADDI_Detach(struct comedi_device *dev);
+static void i_ADDI_Detach(struct comedi_device *dev);
 static int i_ADDI_Reset(struct comedi_device *dev);
 
 static irqreturn_t v_ADDI_Interrupt(int irq, void *d);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index e886ced4978f..ffe390c6da83 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -156,7 +156,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
 	} else
 		us_ConvertTiming = (unsigned short) (devpriv->ui_EocEosConversionTime / 1000);	/*  nano to useconds */
 
-	/*  this_board->i_hwdrv_InsnReadAnalogInput(dev,us_ConvertTiming,insn->n,&insn->chanspec,data,insn->unused[0]); */
+	/*  this_board->ai_read(dev,us_ConvertTiming,insn->n,&insn->chanspec,data,insn->unused[0]); */
 
 	/*  Clear software registers */
 	devpriv->b_TimerSelectMode = 0;
@@ -670,7 +670,7 @@ int i_APCI3120_CommandAnalogInput(struct comedi_device *dev, struct comedi_subde
 			/*  mode 1 */
 
 			devpriv->ui_AiTimer0 = cmd->convert_arg;	/*  timer constant in nano seconds */
-			/* return this_board->i_hwdrv_CommandAnalogInput(1,dev,s); */
+			/* return this_board->ai_cmd(1,dev,s); */
 			return i_APCI3120_CyclicAnalogInput(1, dev, s);
 		}
 
@@ -680,7 +680,7 @@ int i_APCI3120_CommandAnalogInput(struct comedi_device *dev, struct comedi_subde
 		/*  mode 2 */
 		devpriv->ui_AiTimer1 = cmd->scan_begin_arg;
 		devpriv->ui_AiTimer0 = cmd->convert_arg;	/*  variable changed timer2 to timer0 */
-		/* return this_board->i_hwdrv_CommandAnalogInput(2,dev,s); */
+		/* return this_board->ai_cmd(2,dev,s); */
 		return i_APCI3120_CyclicAnalogInput(2, dev, s);
 	}
 	return -1;
@@ -1922,7 +1922,7 @@ int i_APCI3120_InsnConfigTimer(struct comedi_device *dev, struct comedi_subdevic
 
 	ui_Timervalue2 = data[1] / 1000;	/*  convert nano seconds  to u seconds */
 
-	/* this_board->i_hwdrv_InsnConfigTimer(dev, ui_Timervalue2,(unsigned char)data[0]); */
+	/* this_board->timer_config(dev, ui_Timervalue2,(unsigned char)data[0]); */
 	us_TmpValue = (unsigned short) inw(devpriv->iobase + APCI3120_RD_STATUS);
 
 /*
@@ -2092,7 +2092,7 @@ int i_APCI3120_InsnWriteTimer(struct comedi_device *dev, struct comedi_subdevice
 			ui_Timervalue2 = 0;
 	}
 
-	/* this_board->i_hwdrv_InsnWriteTimer(dev,data[0],ui_Timervalue2); */
+	/* this_board->timer_write(dev,data[0],ui_Timervalue2); */
 
 	switch (data[0]) {
 	case APCI3120_START:
@@ -2260,7 +2260,7 @@ int i_APCI3120_InsnReadTimer(struct comedi_device *dev, struct comedi_subdevice
 		comedi_error(dev, "\nread:timer2  not configured ");
 	}
 
-	/* this_board->i_hwdrv_InsnReadTimer(dev,data); */
+	/* this_board->timer_read(dev,data); */
 	if (devpriv->b_Timer2Mode == APCI3120_TIMER) {
 
 		/* Read the LOW unsigned short of Timer 2 register */
@@ -2331,7 +2331,7 @@ int i_APCI3120_InsnReadDigitalInput(struct comedi_device *dev,
 
 	ui_Chan = CR_CHAN(insn->chanspec);	/*  channel specified */
 
-	/* this_board->i_hwdrv_InsnReadDigitalInput(dev,ui_Chan,data); */
+	/* this_board->di_read(dev,ui_Chan,data); */
 	if (ui_Chan <= 3) {
 		ui_TmpValue = (unsigned int) inw(devpriv->iobase + APCI3120_RD_STATUS);
 
@@ -2379,7 +2379,7 @@ int i_APCI3120_InsnBitsDigitalInput(struct comedi_device *dev, struct comedi_sub
 	*****/
 
 	*data = (ui_TmpValue >> 8) & 0xf;
-	/* this_board->i_hwdrv_InsnBitsDigitalInput(dev,data); */
+	/* this_board->di_bits(dev,data); */
 	return insn->n;
 }
 
@@ -2595,7 +2595,7 @@ int i_APCI3120_InsnWriteAnalogOutput(struct comedi_device *dev,
 	ui_Range = CR_RANGE(insn->chanspec);
 	ui_Channel = CR_CHAN(insn->chanspec);
 
-	/* this_board->i_hwdrv_InsnWriteAnalogOutput(dev, ui_Range, ui_Channel,data[0]); */
+	/* this_board->ao_write(dev, ui_Range, ui_Channel,data[0]); */
 	if (ui_Range) {		/*  if 1 then unipolar */
 
 		if (data[0] != 0)
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index 4fc9e8520217..de8c68af3210 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -54,8 +54,6 @@ References:
 #include "../comedidev.h"
 #include "comedi_pci.h"
 
-#define PCI6208_DRIVER_NAME	"adl_pci6208"
-
 /* Board descriptions */
 struct pci6208_board {
 	const char *name;
@@ -85,17 +83,6 @@ static const struct pci6208_board pci6208_boards[] = {
 	 }
 };
 
-/* This is used by modprobe to translate PCI IDs to drivers.  Should
- * only be used for PCI and ISA-PnP devices */
-static DEFINE_PCI_DEVICE_TABLE(pci6208_pci_table) = {
-	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
-	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci6208_pci_table);
-
 /* Will be initialized in pci6208_find device(). */
 #define thisboard ((const struct pci6208_board *)dev->board_ptr)
 
@@ -107,157 +94,6 @@ struct pci6208_private {
 
 #define devpriv ((struct pci6208_private *)dev->private)
 
-static int pci6208_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci6208_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_pci6208 = {
-	.driver_name = PCI6208_DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = pci6208_attach,
-	.detach = pci6208_detach,
-};
-
-static int __devinit driver_pci6208_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, driver_pci6208.driver_name);
-}
-
-static void __devexit driver_pci6208_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_pci6208_pci_driver = {
-	.id_table = pci6208_pci_table,
-	.probe = &driver_pci6208_pci_probe,
-	.remove = __devexit_p(&driver_pci6208_pci_remove)
-};
-
-static int __init driver_pci6208_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci6208);
-	if (retval < 0)
-		return retval;
-
-	driver_pci6208_pci_driver.name = (char *)driver_pci6208.driver_name;
-	return pci_register_driver(&driver_pci6208_pci_driver);
-}
-
-static void __exit driver_pci6208_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci6208_pci_driver);
-	comedi_driver_unregister(&driver_pci6208);
-}
-
-module_init(driver_pci6208_init_module);
-module_exit(driver_pci6208_cleanup_module);
-
-static int pci6208_find_device(struct comedi_device *dev, int bus, int slot);
-static int
-pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
-		  int dev_minor);
-
-/*read/write functions*/
-static int pci6208_ao_winsn(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-static int pci6208_ao_rinsn(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-/* static int pci6208_dio_insn_bits (struct comedi_device *dev,
- *					struct comedi_subdevice *s, */
-/* struct comedi_insn *insn,unsigned int *data); */
-/* static int pci6208_dio_insn_config(struct comedi_device *dev,
- *					struct comedi_subdevice *s, */
-/* struct comedi_insn *insn,unsigned int *data); */
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int pci6208_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int retval;
-	unsigned long io_base;
-
-	printk(KERN_INFO "comedi%d: pci6208: ", dev->minor);
-
-	retval = alloc_private(dev, sizeof(struct pci6208_private));
-	if (retval < 0)
-		return retval;
-
-	retval = pci6208_find_device(dev, it->options[0], it->options[1]);
-	if (retval < 0)
-		return retval;
-
-	retval = pci6208_pci_setup(devpriv->pci_dev, &io_base, dev->minor);
-	if (retval < 0)
-		return retval;
-
-	dev->iobase = io_base;
-	dev->board_name = thisboard->name;
-
-/*
- * Allocate the subdevice structures.  alloc_subdevice() is a
- * convenient macro defined in comedidev.h.
- */
-	if (alloc_subdevices(dev, 2) < 0)
-		return -ENOMEM;
-
-	s = dev->subdevices + 0;
-	/* analog output subdevice */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE;	/* anything else to add here?? */
-	s->n_chan = thisboard->ao_chans;
-	s->maxdata = 0xffff;	/* 16-bit DAC */
-	s->range_table = &range_bipolar10;	/* this needs to be checked. */
-	s->insn_write = pci6208_ao_winsn;
-	s->insn_read = pci6208_ao_rinsn;
-
-	/* s=dev->subdevices+1; */
-	/* digital i/o subdevice */
-	/* s->type=COMEDI_SUBD_DIO; */
-	/* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */
-	/* s->n_chan=16; */
-	/* s->maxdata=1; */
-	/* s->range_table=&range_digital; */
-	/* s->insn_bits = pci6208_dio_insn_bits; */
-	/* s->insn_config = pci6208_dio_insn_config; */
-
-	printk(KERN_INFO "attached\n");
-
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pci6208_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: pci6208: remove\n", dev->minor);
-
-	if (devpriv && devpriv->pci_dev) {
-		if (dev->iobase)
-			comedi_pci_disable(devpriv->pci_dev);
-		pci_dev_put(devpriv->pci_dev);
-	}
-
-	return 0;
-}
-
 static int pci6208_ao_winsn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -410,7 +246,7 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
 	unsigned long io_base, io_range, lcr_io_base, lcr_io_range;
 
 	/*  Enable PCI device and request regions */
-	if (comedi_pci_enable(pci_dev, PCI6208_DRIVER_NAME) < 0) {
+	if (comedi_pci_enable(pci_dev, "adl_pci6208") < 0) {
 		printk(KERN_ERR "comedi%d: Failed to enable PCI device "
 			"and request regions\n",
 			dev_minor);
@@ -442,6 +278,103 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
 	return 0;
 }
 
+static int pci6208_attach(struct comedi_device *dev,
+			  struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int retval;
+	unsigned long io_base;
+
+	printk(KERN_INFO "comedi%d: pci6208: ", dev->minor);
+
+	retval = alloc_private(dev, sizeof(struct pci6208_private));
+	if (retval < 0)
+		return retval;
+
+	retval = pci6208_find_device(dev, it->options[0], it->options[1]);
+	if (retval < 0)
+		return retval;
+
+	retval = pci6208_pci_setup(devpriv->pci_dev, &io_base, dev->minor);
+	if (retval < 0)
+		return retval;
+
+	dev->iobase = io_base;
+	dev->board_name = thisboard->name;
+
+	if (alloc_subdevices(dev, 2) < 0)
+		return -ENOMEM;
+
+	s = dev->subdevices + 0;
+	/* analog output subdevice */
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_WRITABLE;	/* anything else to add here?? */
+	s->n_chan = thisboard->ao_chans;
+	s->maxdata = 0xffff;	/* 16-bit DAC */
+	s->range_table = &range_bipolar10;	/* this needs to be checked. */
+	s->insn_write = pci6208_ao_winsn;
+	s->insn_read = pci6208_ao_rinsn;
+
+	/* s=dev->subdevices+1; */
+	/* digital i/o subdevice */
+	/* s->type=COMEDI_SUBD_DIO; */
+	/* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */
+	/* s->n_chan=16; */
+	/* s->maxdata=1; */
+	/* s->range_table=&range_digital; */
+	/* s->insn_bits = pci6208_dio_insn_bits; */
+	/* s->insn_config = pci6208_dio_insn_config; */
+
+	printk(KERN_INFO "attached\n");
+
+	return 1;
+}
+
+static void pci6208_detach(struct comedi_device *dev)
+{
+	if (devpriv && devpriv->pci_dev) {
+		if (dev->iobase)
+			comedi_pci_disable(devpriv->pci_dev);
+		pci_dev_put(devpriv->pci_dev);
+	}
+}
+
+static struct comedi_driver adl_pci6208_driver = {
+	.driver_name	= "adl_pci6208",
+	.module		= THIS_MODULE,
+	.attach		= pci6208_attach,
+	.detach		= pci6208_detach,
+};
+
+static int __devinit adl_pci6208_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &adl_pci6208_driver);
+}
+
+static void __devexit adl_pci6208_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+/* This is used by modprobe to translate PCI IDs to drivers.  Should
+ * only be used for PCI and ISA-PnP devices */
+static DEFINE_PCI_DEVICE_TABLE(adl_pci6208_pci_table) = {
+	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
+	/* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, 0x6208) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, adl_pci6208_pci_table);
+
+static struct pci_driver adl_pci6208_pci_driver = {
+	.name		= "adl_pci6208",
+	.id_table	= adl_pci6208_pci_table,
+	.probe		= adl_pci6208_pci_probe,
+	.remove		= __devexit_p(adl_pci6208_pci_remove),
+};
+module_comedi_pci_driver(adl_pci6208_driver, adl_pci6208_pci_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci7230.c b/drivers/staging/comedi/drivers/adl_pci7230.c
index 20d570554fa4..e8053bc825f4 100644
--- a/drivers/staging/comedi/drivers/adl_pci7230.c
+++ b/drivers/staging/comedi/drivers/adl_pci7230.c
@@ -43,13 +43,6 @@ Configuration Options:
 
 #define PCI_DEVICE_ID_PCI7230 0x7230
 
-static DEFINE_PCI_DEVICE_TABLE(adl_pci7230_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci7230_pci_table);
-
 struct adl_pci7230_private {
 	int data;
 	struct pci_dev *pci_dev;
@@ -57,27 +50,36 @@ struct adl_pci7230_private {
 
 #define devpriv ((struct adl_pci7230_private *)dev->private)
 
-static int adl_pci7230_attach(struct comedi_device *dev,
-	struct comedi_devconfig *it);
-static int adl_pci7230_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci7230 = {
-	.driver_name = "adl_pci7230",
-	.module = THIS_MODULE,
-	.attach = adl_pci7230_attach,
-	.detach = adl_pci7230_detach,
-};
+static int adl_pci7230_do_insn_bits(struct comedi_device *dev,
+	struct comedi_subdevice *s,
+	struct comedi_insn *insn,
+	unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
+
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= (data[0] & data[1]);
+
+		outl((s->state  << 16) & 0xffffffff, dev->iobase + PCI7230_DO);
+	}
 
-/* Digital IO */
+	return 2;
+}
 
 static int adl_pci7230_di_insn_bits(struct comedi_device *dev,
 	struct comedi_subdevice *s,
 	struct comedi_insn *insn,
-	unsigned int *data);
+	unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
 
-static int adl_pci7230_do_insn_bits(struct comedi_device *dev,
-	struct comedi_subdevice *s,
-	struct comedi_insn *insn,
-	unsigned int *data);
+	data[1] = inl(dev->iobase + PCI7230_DI) & 0xffffffff;
+
+	return 2;
+}
 
 static int adl_pci7230_attach(struct comedi_device *dev,
 	struct comedi_devconfig *it)
@@ -148,89 +150,46 @@ static int adl_pci7230_attach(struct comedi_device *dev,
 	return 1;
 }
 
-static int adl_pci7230_detach(struct comedi_device *dev)
+static void adl_pci7230_detach(struct comedi_device *dev)
 {
-	printk(KERN_DEBUG "comedi%d: pci7230: remove\n", dev->minor);
-
 	if (devpriv && devpriv->pci_dev) {
 		if (dev->iobase)
 			comedi_pci_disable(devpriv->pci_dev);
 		pci_dev_put(devpriv->pci_dev);
 	}
-
-	return 0;
-}
-
-static int adl_pci7230_do_insn_bits(struct comedi_device *dev,
-	struct comedi_subdevice *s,
-	struct comedi_insn *insn,
-	unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-
-		outl((s->state  << 16) & 0xffffffff, dev->iobase + PCI7230_DO);
-	}
-
-	return 2;
 }
 
-static int adl_pci7230_di_insn_bits(struct comedi_device *dev,
-	struct comedi_subdevice *s,
-	struct comedi_insn *insn,
-	unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = inl(dev->iobase + PCI7230_DI) & 0xffffffff;
-
-	return 2;
-}
+static struct comedi_driver adl_pci7230_driver = {
+	.driver_name	= "adl_pci7230",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci7230_attach,
+	.detach		= adl_pci7230_detach,
+};
 
-static int __devinit driver_adl_pci7230_pci_probe(struct pci_dev *dev,
-						  const struct pci_device_id
-						  *ent)
+static int __devinit adl_pci7230_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_adl_pci7230.driver_name);
+	return comedi_pci_auto_config(dev, &adl_pci7230_driver);
 }
 
-static void __devexit driver_adl_pci7230_pci_remove(struct pci_dev *dev)
+static void __devexit adl_pci7230_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_adl_pci7230_pci_driver = {
-	.id_table = adl_pci7230_pci_table,
-	.probe = &driver_adl_pci7230_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci7230_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7230_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adl_pci7230_pci_table);
 
-static int __init driver_adl_pci7230_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_adl_pci7230);
-	if (retval < 0)
-		return retval;
-
-	driver_adl_pci7230_pci_driver.name =
-	    (char *)driver_adl_pci7230.driver_name;
-	return pci_register_driver(&driver_adl_pci7230_pci_driver);
-}
-
-static void __exit driver_adl_pci7230_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_adl_pci7230_pci_driver);
-	comedi_driver_unregister(&driver_adl_pci7230);
-}
-
-module_init(driver_adl_pci7230_init_module);
-module_exit(driver_adl_pci7230_cleanup_module);
+static struct pci_driver adl_pci7230_pci_driver = {
+	.name		= "adl_pci7230",
+	.id_table	= adl_pci7230_pci_table,
+	.probe		= adl_pci7230_pci_probe,
+	.remove		= __devexit_p(adl_pci7230_pci_remove),
+};
+module_comedi_pci_driver(adl_pci7230_driver, adl_pci7230_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/adl_pci7296.c b/drivers/staging/comedi/drivers/adl_pci7296.c
index 9a2320537bdb..b4dae3b7598b 100644
--- a/drivers/staging/comedi/drivers/adl_pci7296.c
+++ b/drivers/staging/comedi/drivers/adl_pci7296.c
@@ -48,13 +48,6 @@ Configuration Options:
 
 #define PCI_DEVICE_ID_PCI7296 0x7296
 
-static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table);
-
 struct adl_pci7296_private {
 	int data;
 	struct pci_dev *pci_dev;
@@ -63,16 +56,6 @@ struct adl_pci7296_private {
 #define devpriv ((struct adl_pci7296_private *)dev->private)
 
 static int adl_pci7296_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
-static int adl_pci7296_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci7296 = {
-	.driver_name = "adl_pci7296",
-	.module = THIS_MODULE,
-	.attach = adl_pci7296_attach,
-	.detach = adl_pci7296_detach,
-};
-
-static int adl_pci7296_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev = NULL;
@@ -151,66 +134,52 @@ static int adl_pci7296_attach(struct comedi_device *dev,
 	return -EIO;
 }
 
-static int adl_pci7296_detach(struct comedi_device *dev)
+static void adl_pci7296_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: pci7432: remove\n", dev->minor);
-
 	if (devpriv && devpriv->pci_dev) {
 		if (dev->iobase)
 			comedi_pci_disable(devpriv->pci_dev);
 		pci_dev_put(devpriv->pci_dev);
 	}
-	/*  detach four 8255 digital io subdevices */
 	if (dev->subdevices) {
 		subdev_8255_cleanup(dev, dev->subdevices + 0);
 		subdev_8255_cleanup(dev, dev->subdevices + 1);
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
 		subdev_8255_cleanup(dev, dev->subdevices + 3);
-
 	}
-
-	return 0;
 }
 
-static int __devinit driver_adl_pci7296_pci_probe(struct pci_dev *dev,
-						  const struct pci_device_id
-						  *ent)
+static struct comedi_driver adl_pci7296_driver = {
+	.driver_name	= "adl_pci7296",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci7296_attach,
+	.detach		= adl_pci7296_detach,
+};
+
+static int __devinit adl_pci7296_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_adl_pci7296.driver_name);
+	return comedi_pci_auto_config(dev, &adl_pci7296_driver);
 }
 
-static void __devexit driver_adl_pci7296_pci_remove(struct pci_dev *dev)
+static void __devexit adl_pci7296_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_adl_pci7296_pci_driver = {
-	.id_table = adl_pci7296_pci_table,
-	.probe = &driver_adl_pci7296_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci7296_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7296_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7296) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adl_pci7296_pci_table);
 
-static int __init driver_adl_pci7296_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_adl_pci7296);
-	if (retval < 0)
-		return retval;
-
-	driver_adl_pci7296_pci_driver.name =
-	    (char *)driver_adl_pci7296.driver_name;
-	return pci_register_driver(&driver_adl_pci7296_pci_driver);
-}
-
-static void __exit driver_adl_pci7296_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_adl_pci7296_pci_driver);
-	comedi_driver_unregister(&driver_adl_pci7296);
-}
-
-module_init(driver_adl_pci7296_init_module);
-module_exit(driver_adl_pci7296_cleanup_module);
+static struct pci_driver adl_pci7296_pci_driver = {
+	.name		= "adl_pci7296",
+	.id_table	= adl_pci7296_pci_table,
+	.probe		= adl_pci7296_pci_probe,
+	.remove		= __devexit_p(adl_pci7296_pci_remove),
+};
+module_comedi_pci_driver(adl_pci7296_driver, adl_pci7296_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/adl_pci7432.c b/drivers/staging/comedi/drivers/adl_pci7432.c
index 86ee21976041..9cbfb61a4478 100644
--- a/drivers/staging/comedi/drivers/adl_pci7432.c
+++ b/drivers/staging/comedi/drivers/adl_pci7432.c
@@ -43,13 +43,6 @@ Configuration Options:
 
 #define PCI_DEVICE_ID_PCI7432 0x7432
 
-static DEFINE_PCI_DEVICE_TABLE(adl_pci7432_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci7432_pci_table);
-
 struct adl_pci7432_private {
 	int data;
 	struct pci_dev *pci_dev;
@@ -57,29 +50,44 @@ struct adl_pci7432_private {
 
 #define devpriv ((struct adl_pci7432_private *)dev->private)
 
-static int adl_pci7432_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
-static int adl_pci7432_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci7432 = {
-	.driver_name = "adl_pci7432",
-	.module = THIS_MODULE,
-	.attach = adl_pci7432_attach,
-	.detach = adl_pci7432_detach,
-};
+static int adl_pci7432_do_insn_bits(struct comedi_device *dev,
+				    struct comedi_subdevice *s,
+				    struct comedi_insn *insn,
+				    unsigned int *data)
+{
+	printk(KERN_DEBUG "comedi: pci7432_do_insn_bits called\n");
+	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);
+
+	if (insn->n != 2)
+		return -EINVAL;
 
-/* Digital IO */
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= (data[0] & data[1]);
+
+		printk(KERN_DEBUG "comedi: out: %8x on iobase %4lx\n", s->state,
+		       dev->iobase + PCI7432_DO);
+		outl(s->state & 0xffffffff, dev->iobase + PCI7432_DO);
+	}
+	return 2;
+}
 
 static int adl_pci7432_di_insn_bits(struct comedi_device *dev,
 				    struct comedi_subdevice *s,
 				    struct comedi_insn *insn,
-				    unsigned int *data);
+				    unsigned int *data)
+{
+	printk(KERN_DEBUG "comedi: pci7432_di_insn_bits called\n");
+	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);
 
-static int adl_pci7432_do_insn_bits(struct comedi_device *dev,
-				    struct comedi_subdevice *s,
-				    struct comedi_insn *insn,
-				    unsigned int *data);
+	if (insn->n != 2)
+		return -EINVAL;
+
+	data[1] = inl(dev->iobase + PCI7432_DI) & 0xffffffff;
+	printk(KERN_DEBUG "comedi: data1 %8x\n", data[1]);
 
-/*            */
+	return 2;
+}
 
 static int adl_pci7432_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
@@ -153,97 +161,46 @@ static int adl_pci7432_attach(struct comedi_device *dev,
 	return -EIO;
 }
 
-static int adl_pci7432_detach(struct comedi_device *dev)
+static void adl_pci7432_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: pci7432: remove\n", dev->minor);
-
 	if (devpriv && devpriv->pci_dev) {
 		if (dev->iobase)
 			comedi_pci_disable(devpriv->pci_dev);
 		pci_dev_put(devpriv->pci_dev);
 	}
-
-	return 0;
 }
 
-static int adl_pci7432_do_insn_bits(struct comedi_device *dev,
-				    struct comedi_subdevice *s,
-				    struct comedi_insn *insn,
-				    unsigned int *data)
-{
-	printk(KERN_DEBUG "comedi: pci7432_do_insn_bits called\n");
-	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);
-
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-
-		printk(KERN_DEBUG "comedi: out: %8x on iobase %4lx\n", s->state,
-		       dev->iobase + PCI7432_DO);
-		outl(s->state & 0xffffffff, dev->iobase + PCI7432_DO);
-	}
-	return 2;
-}
-
-static int adl_pci7432_di_insn_bits(struct comedi_device *dev,
-				    struct comedi_subdevice *s,
-				    struct comedi_insn *insn,
-				    unsigned int *data)
-{
-	printk(KERN_DEBUG "comedi: pci7432_di_insn_bits called\n");
-	printk(KERN_DEBUG "comedi: data0: %8x data1: %8x\n", data[0], data[1]);
-
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = inl(dev->iobase + PCI7432_DI) & 0xffffffff;
-	printk(KERN_DEBUG "comedi: data1 %8x\n", data[1]);
-
-	return 2;
-}
+static struct comedi_driver adl_pci7432_driver = {
+	.driver_name	= "adl_pci7432",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci7432_attach,
+	.detach		= adl_pci7432_detach,
+};
 
-static int __devinit driver_adl_pci7432_pci_probe(struct pci_dev *dev,
-						  const struct pci_device_id
-						  *ent)
+static int __devinit adl_pci7432_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_adl_pci7432.driver_name);
+	return comedi_pci_auto_config(dev, &adl_pci7432_driver);
 }
 
-static void __devexit driver_adl_pci7432_pci_remove(struct pci_dev *dev)
+static void __devexit adl_pci7432_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_adl_pci7432_pci_driver = {
-	.id_table = adl_pci7432_pci_table,
-	.probe = &driver_adl_pci7432_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci7432_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adl_pci7432_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adl_pci7432_pci_table);
 
-static int __init driver_adl_pci7432_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_adl_pci7432);
-	if (retval < 0)
-		return retval;
-
-	driver_adl_pci7432_pci_driver.name =
-	    (char *)driver_adl_pci7432.driver_name;
-	return pci_register_driver(&driver_adl_pci7432_pci_driver);
-}
-
-static void __exit driver_adl_pci7432_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_adl_pci7432_pci_driver);
-	comedi_driver_unregister(&driver_adl_pci7432);
-}
-
-module_init(driver_adl_pci7432_init_module);
-module_exit(driver_adl_pci7432_cleanup_module);
+static struct pci_driver adl_pci7432_pci_driver = {
+	.name		= "adl_pci7432",
+	.id_table	= adl_pci7432_pci_table,
+	.probe		= adl_pci7432_pci_probe,
+	.remove		= __devexit_p(adl_pci7432_pci_remove),
+};
+module_comedi_pci_driver(adl_pci7432_driver, adl_pci7432_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/adl_pci8164.c b/drivers/staging/comedi/drivers/adl_pci8164.c
index 3b83d65bc1bc..409ef13ad090 100644
--- a/drivers/staging/comedi/drivers/adl_pci8164.c
+++ b/drivers/staging/comedi/drivers/adl_pci8164.c
@@ -56,13 +56,6 @@ Configuration Options:
 
 #define PCI_DEVICE_ID_PCI8164 0x8164
 
-static DEFINE_PCI_DEVICE_TABLE(adl_pci8164_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI8164) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, adl_pci8164_pci_table);
-
 struct adl_pci8164_private {
 	int data;
 	struct pci_dev *pci_dev;
@@ -70,159 +63,6 @@ struct adl_pci8164_private {
 
 #define devpriv ((struct adl_pci8164_private *)dev->private)
 
-static int adl_pci8164_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
-static int adl_pci8164_detach(struct comedi_device *dev);
-static struct comedi_driver driver_adl_pci8164 = {
-	.driver_name = "adl_pci8164",
-	.module = THIS_MODULE,
-	.attach = adl_pci8164_attach,
-	.detach = adl_pci8164_detach,
-};
-
-static int adl_pci8164_insn_read_msts(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_read_ssts(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_read_buf0(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_read_buf1(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_write_cmd(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_write_otp(struct comedi_device *dev,
-				      struct comedi_subdevice *s,
-				      struct comedi_insn *insn,
-				      unsigned int *data);
-
-static int adl_pci8164_insn_write_buf0(struct comedi_device *dev,
-				       struct comedi_subdevice *s,
-				       struct comedi_insn *insn,
-				       unsigned int *data);
-
-static int adl_pci8164_insn_write_buf1(struct comedi_device *dev,
-				       struct comedi_subdevice *s,
-				       struct comedi_insn *insn,
-				       unsigned int *data);
-
-static int adl_pci8164_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it)
-{
-	struct pci_dev *pcidev = NULL;
-	struct comedi_subdevice *s;
-	int bus, slot;
-
-	printk(KERN_INFO "comedi: attempt to attach...\n");
-	printk(KERN_INFO "comedi%d: adl_pci8164\n", dev->minor);
-
-	dev->board_name = "pci8164";
-	bus = it->options[0];
-	slot = it->options[1];
-
-	if (alloc_private(dev, sizeof(struct adl_pci8164_private)) < 0)
-		return -ENOMEM;
-
-	if (alloc_subdevices(dev, 4) < 0)
-		return -ENOMEM;
-
-	for_each_pci_dev(pcidev) {
-		if (pcidev->vendor == PCI_VENDOR_ID_ADLINK &&
-		    pcidev->device == PCI_DEVICE_ID_PCI8164) {
-			if (bus || slot) {
-				/* requested particular bus/slot */
-				if (pcidev->bus->number != bus
-					|| PCI_SLOT(pcidev->devfn) != slot)
-					continue;
-			}
-			devpriv->pci_dev = pcidev;
-			if (comedi_pci_enable(pcidev, "adl_pci8164") < 0) {
-				printk(KERN_ERR "comedi%d: Failed to enable "
-				"PCI device and request regions\n", dev->minor);
-				return -EIO;
-			}
-			dev->iobase = pci_resource_start(pcidev, 2);
-			printk(KERN_DEBUG "comedi: base addr %4lx\n",
-				   dev->iobase);
-
-			s = dev->subdevices + 0;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_msts;
-			s->insn_write = adl_pci8164_insn_write_cmd;
-
-			s = dev->subdevices + 1;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_ssts;
-			s->insn_write = adl_pci8164_insn_write_otp;
-
-			s = dev->subdevices + 2;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_buf0;
-			s->insn_write = adl_pci8164_insn_write_buf0;
-
-			s = dev->subdevices + 3;
-			s->type = COMEDI_SUBD_PROC;
-			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-			s->n_chan = 4;
-			s->maxdata = 0xffff;
-			s->len_chanlist = 4;
-			/* s->range_table = &range_axis; */
-			s->insn_read = adl_pci8164_insn_read_buf1;
-			s->insn_write = adl_pci8164_insn_write_buf1;
-
-			printk(KERN_INFO "comedi: attached\n");
-
-			return 1;
-		}
-	}
-
-	printk(KERN_ERR "comedi%d: no supported board found!"
-		   "(req. bus/slot : %d/%d)\n", dev->minor, bus, slot);
-	return -EIO;
-}
-
-static int adl_pci8164_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: pci8164: remove\n", dev->minor);
-
-	if (devpriv && devpriv->pci_dev) {
-		if (dev->iobase)
-			comedi_pci_disable(devpriv->pci_dev);
-		pci_dev_put(devpriv->pci_dev);
-	}
-
-	return 0;
-}
-
 /*
  all the read commands are the same except for the addition a constant
  * const to the data for inw()
@@ -384,45 +224,136 @@ static int adl_pci8164_insn_write_buf1(struct comedi_device *dev,
 	return 2;
 }
 
-static int __devinit driver_adl_pci8164_pci_probe(struct pci_dev *dev,
-						  const struct pci_device_id
-						  *ent)
+static int adl_pci8164_attach(struct comedi_device *dev,
+			      struct comedi_devconfig *it)
 {
-	return comedi_pci_auto_config(dev, driver_adl_pci8164.driver_name);
+	struct pci_dev *pcidev = NULL;
+	struct comedi_subdevice *s;
+	int bus, slot;
+
+	printk(KERN_INFO "comedi: attempt to attach...\n");
+	printk(KERN_INFO "comedi%d: adl_pci8164\n", dev->minor);
+
+	dev->board_name = "pci8164";
+	bus = it->options[0];
+	slot = it->options[1];
+
+	if (alloc_private(dev, sizeof(struct adl_pci8164_private)) < 0)
+		return -ENOMEM;
+
+	if (alloc_subdevices(dev, 4) < 0)
+		return -ENOMEM;
+
+	for_each_pci_dev(pcidev) {
+		if (pcidev->vendor == PCI_VENDOR_ID_ADLINK &&
+		    pcidev->device == PCI_DEVICE_ID_PCI8164) {
+			if (bus || slot) {
+				/* requested particular bus/slot */
+				if (pcidev->bus->number != bus
+					|| PCI_SLOT(pcidev->devfn) != slot)
+					continue;
+			}
+			devpriv->pci_dev = pcidev;
+			if (comedi_pci_enable(pcidev, "adl_pci8164") < 0) {
+				printk(KERN_ERR "comedi%d: Failed to enable "
+				"PCI device and request regions\n", dev->minor);
+				return -EIO;
+			}
+			dev->iobase = pci_resource_start(pcidev, 2);
+			printk(KERN_DEBUG "comedi: base addr %4lx\n",
+				   dev->iobase);
+
+			s = dev->subdevices + 0;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_msts;
+			s->insn_write = adl_pci8164_insn_write_cmd;
+
+			s = dev->subdevices + 1;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_ssts;
+			s->insn_write = adl_pci8164_insn_write_otp;
+
+			s = dev->subdevices + 2;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_buf0;
+			s->insn_write = adl_pci8164_insn_write_buf0;
+
+			s = dev->subdevices + 3;
+			s->type = COMEDI_SUBD_PROC;
+			s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+			s->n_chan = 4;
+			s->maxdata = 0xffff;
+			s->len_chanlist = 4;
+			/* s->range_table = &range_axis; */
+			s->insn_read = adl_pci8164_insn_read_buf1;
+			s->insn_write = adl_pci8164_insn_write_buf1;
+
+			printk(KERN_INFO "comedi: attached\n");
+
+			return 1;
+		}
+	}
+
+	printk(KERN_ERR "comedi%d: no supported board found!"
+		   "(req. bus/slot : %d/%d)\n", dev->minor, bus, slot);
+	return -EIO;
 }
 
-static void __devexit driver_adl_pci8164_pci_remove(struct pci_dev *dev)
+static void adl_pci8164_detach(struct comedi_device *dev)
 {
-	comedi_pci_auto_unconfig(dev);
+	if (devpriv && devpriv->pci_dev) {
+		if (dev->iobase)
+			comedi_pci_disable(devpriv->pci_dev);
+		pci_dev_put(devpriv->pci_dev);
+	}
 }
 
-static struct pci_driver driver_adl_pci8164_pci_driver = {
-	.id_table = adl_pci8164_pci_table,
-	.probe = &driver_adl_pci8164_pci_probe,
-	.remove = __devexit_p(&driver_adl_pci8164_pci_remove)
+static struct comedi_driver adl_pci8164_driver = {
+	.driver_name	= "adl_pci8164",
+	.module		= THIS_MODULE,
+	.attach		= adl_pci8164_attach,
+	.detach		= adl_pci8164_detach,
 };
 
-static int __init driver_adl_pci8164_init_module(void)
+static int __devinit adl_pci8164_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	int retval;
-
-	retval = comedi_driver_register(&driver_adl_pci8164);
-	if (retval < 0)
-		return retval;
-
-	driver_adl_pci8164_pci_driver.name =
-	    (char *)driver_adl_pci8164.driver_name;
-	return pci_register_driver(&driver_adl_pci8164_pci_driver);
+	return comedi_pci_auto_config(dev, &adl_pci8164_driver);
 }
 
-static void __exit driver_adl_pci8164_cleanup_module(void)
+static void __devexit adl_pci8164_pci_remove(struct pci_dev *dev)
 {
-	pci_unregister_driver(&driver_adl_pci8164_pci_driver);
-	comedi_driver_unregister(&driver_adl_pci8164);
+	comedi_pci_auto_unconfig(dev);
 }
 
-module_init(driver_adl_pci8164_init_module);
-module_exit(driver_adl_pci8164_cleanup_module);
+static DEFINE_PCI_DEVICE_TABLE(adl_pci8164_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI8164) },
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, adl_pci8164_pci_table);
+
+static struct pci_driver adl_pci8164_pci_driver = {
+	.name		= "adl_pci8164",
+	.id_table	= adl_pci8164_pci_table,
+	.probe		= adl_pci8164_pci_probe,
+	.remove		= __devexit_p(adl_pci8164_pci_remove),
+};
+module_comedi_pci_driver(adl_pci8164_driver, adl_pci8164_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index 2a9bd88a4abb..ccfb1a52154e 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -289,16 +289,6 @@ TODO:
 			PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2); \
 	} while (0)
 
-/*  Function prototypes */
-
-static int pci9111_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci9111_detach(struct comedi_device *dev);
-static void pci9111_ai_munge(struct comedi_device *dev,
-			     struct comedi_subdevice *s, void *data,
-			     unsigned int num_bytes,
-			     unsigned int start_chan_index);
-
 static const struct comedi_lrange pci9111_hr_ai_range = {
 	5,
 	{
@@ -310,14 +300,6 @@ static const struct comedi_lrange pci9111_hr_ai_range = {
 	 }
 };
 
-static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID) },
-	/* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci9111_pci_table);
-
 /*  */
 /*  Board specification structure */
 /*  */
@@ -354,51 +336,6 @@ static const struct pci9111_board pci9111_boards[] = {
 #define pci9111_board_nbr \
 	(sizeof(pci9111_boards)/sizeof(struct pci9111_board))
 
-static struct comedi_driver pci9111_driver = {
-	.driver_name = PCI9111_DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = pci9111_attach,
-	.detach = pci9111_detach,
-};
-
-static int __devinit pci9111_driver_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, pci9111_driver.driver_name);
-}
-
-static void __devexit pci9111_driver_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver pci9111_driver_pci_driver = {
-	.id_table = pci9111_pci_table,
-	.probe = &pci9111_driver_pci_probe,
-	.remove = __devexit_p(&pci9111_driver_pci_remove)
-};
-
-static int __init pci9111_driver_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&pci9111_driver);
-	if (retval < 0)
-		return retval;
-
-	pci9111_driver_pci_driver.name = (char *)pci9111_driver.driver_name;
-	return pci_register_driver(&pci9111_driver_pci_driver);
-}
-
-static void __exit pci9111_driver_cleanup_module(void)
-{
-	pci_unregister_driver(&pci9111_driver_pci_driver);
-	comedi_driver_unregister(&pci9111_driver);
-}
-
-module_init(pci9111_driver_init_module);
-module_exit(pci9111_driver_cleanup_module);
-
 /*  Private data structure */
 
 struct pci9111_private_data {
@@ -1445,31 +1382,54 @@ found:
 	return 0;
 }
 
-/*  Detach */
-
-static int pci9111_detach(struct comedi_device *dev)
+static void pci9111_detach(struct comedi_device *dev)
 {
-	/*  Reset device */
-
 	if (dev->private != NULL) {
 		if (dev_private->is_valid)
 			pci9111_reset(dev);
-
 	}
-	/*  Release previously allocated irq */
-
 	if (dev->irq != 0)
 		free_irq(dev->irq, dev);
-
 	if (dev_private != NULL && dev_private->pci_device != NULL) {
 		if (dev->iobase)
 			comedi_pci_disable(dev_private->pci_device);
 		pci_dev_put(dev_private->pci_device);
 	}
+}
 
-	return 0;
+static struct comedi_driver adl_pci9111_driver = {
+	.driver_name	= "adl_pci9111",
+	.module		= THIS_MODULE,
+	.attach		= pci9111_attach,
+	.detach		= pci9111_detach,
+};
+
+static int __devinit pci9111_pci_probe(struct pci_dev *dev,
+				       const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &adl_pci9111_driver);
 }
 
+static void __devexit pci9111_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID) },
+	/* { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID) }, */
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, pci9111_pci_table);
+
+static struct pci_driver adl_pci9111_pci_driver = {
+	.name		= "adl_pci9111",
+	.id_table	= pci9111_pci_table,
+	.probe		= pci9111_pci_probe,
+	.remove		= __devexit_p(pci9111_pci_remove),
+};
+module_comedi_pci_driver(adl_pci9111_driver, adl_pci9111_pci_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index f17654e44aef..78645863297b 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -221,10 +221,6 @@ static const struct comedi_lrange range_pci9118hg = { 8, {
 					 * of BIP/UNI ranges
 					 */
 
-static int pci9118_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci9118_detach(struct comedi_device *dev);
-
 struct boardtype {
 	const char *name;		/* board name */
 	int vendor_id;			/* PCI vendor a device ID of card */
@@ -252,81 +248,6 @@ struct boardtype {
 
 };
 
-static DEFINE_PCI_DEVICE_TABLE(pci9118_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMCC, 0x80d9) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci9118_pci_table);
-
-static const struct boardtype boardtypes[] = {
-	{"pci9118dg", PCI_VENDOR_ID_AMCC, 0x80d9,
-	 AMCC_OP_REG_SIZE, IORANGE_9118,
-	 16, 8, 256, PCI9118_CHANLEN, 2, 0x0fff, 0x0fff,
-	 &range_pci9118dg_hr, &range_bipolar10,
-	 3000, 12, 512},
-	{"pci9118hg", PCI_VENDOR_ID_AMCC, 0x80d9,
-	 AMCC_OP_REG_SIZE, IORANGE_9118,
-	 16, 8, 256, PCI9118_CHANLEN, 2, 0x0fff, 0x0fff,
-	 &range_pci9118hg, &range_bipolar10,
-	 3000, 12, 512},
-	{"pci9118hr", PCI_VENDOR_ID_AMCC, 0x80d9,
-	 AMCC_OP_REG_SIZE, IORANGE_9118,
-	 16, 8, 256, PCI9118_CHANLEN, 2, 0xffff, 0x0fff,
-	 &range_pci9118dg_hr, &range_bipolar10,
-	 10000, 40, 512},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
-
-static struct comedi_driver driver_pci9118 = {
-	.driver_name = "adl_pci9118",
-	.module = THIS_MODULE,
-	.attach = pci9118_attach,
-	.detach = pci9118_detach,
-	.num_names = n_boardtypes,
-	.board_name = &boardtypes[0].name,
-	.offset = sizeof(struct boardtype),
-};
-
-static int __devinit driver_pci9118_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, driver_pci9118.driver_name);
-}
-
-static void __devexit driver_pci9118_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_pci9118_pci_driver = {
-	.id_table = pci9118_pci_table,
-	.probe = &driver_pci9118_pci_probe,
-	.remove = __devexit_p(&driver_pci9118_pci_remove)
-};
-
-static int __init driver_pci9118_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci9118);
-	if (retval < 0)
-		return retval;
-
-	driver_pci9118_pci_driver.name = (char *)driver_pci9118.driver_name;
-	return pci_register_driver(&driver_pci9118_pci_driver);
-}
-
-static void __exit driver_pci9118_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci9118_pci_driver);
-	comedi_driver_unregister(&driver_pci9118);
-}
-
-module_init(driver_pci9118_init_module);
-module_exit(driver_pci9118_cleanup_module);
-
 struct pci9118_private {
 	unsigned long iobase_a;	/* base+size for AMCC chip */
 	unsigned int master;	/* master capable */
@@ -2190,9 +2111,6 @@ static int pci9118_reset(struct comedi_device *dev)
 	return 0;
 }
 
-/*
-==============================================================================
-*/
 static int pci9118_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@@ -2435,10 +2353,7 @@ static int pci9118_attach(struct comedi_device *dev,
 	return 0;
 }
 
-/*
-==============================================================================
-*/
-static int pci9118_detach(struct comedi_device *dev)
+static void pci9118_detach(struct comedi_device *dev)
 {
 	if (dev->private) {
 		if (devpriv->valid)
@@ -2458,13 +2373,100 @@ static int pci9118_detach(struct comedi_device *dev)
 			free_pages((unsigned long)devpriv->dmabuf_virt[1],
 				   devpriv->dmabuf_pages[1]);
 	}
+}
 
-	return 0;
+static const struct boardtype boardtypes[] = {
+	{
+		.name		= "pci9118dg",
+		.vendor_id	= PCI_VENDOR_ID_AMCC,
+		.device_id	= 0x80d9,
+		.iorange_amcc	= AMCC_OP_REG_SIZE,
+		.iorange_9118	= IORANGE_9118,
+		.n_aichan	= 16,
+		.n_aichand	= 8,
+		.mux_aichan	= 256,
+		.n_aichanlist	= PCI9118_CHANLEN,
+		.n_aochan	= 2,
+		.ai_maxdata	= 0x0fff,
+		.ao_maxdata	= 0x0fff,
+		.rangelist_ai	= &range_pci9118dg_hr,
+		.rangelist_ao	= &range_bipolar10,
+		.ai_ns_min	= 3000,
+		.ai_pacer_min	= 12,
+		.half_fifo_size	= 512,
+	}, {
+		.name		= "pci9118hg",
+		.vendor_id	= PCI_VENDOR_ID_AMCC,
+		.device_id	= 0x80d9,
+		.iorange_amcc	= AMCC_OP_REG_SIZE,
+		.iorange_9118	= IORANGE_9118,
+		.n_aichan	= 16,
+		.n_aichand	= 8,
+		.mux_aichan	= 256,
+		.n_aichanlist	= PCI9118_CHANLEN,
+		.n_aochan	= 2,
+		.ai_maxdata	= 0x0fff,
+		.ao_maxdata	= 0x0fff,
+		.rangelist_ai	= &range_pci9118hg,
+		.rangelist_ao	= &range_bipolar10,
+		.ai_ns_min	= 3000,
+		.ai_pacer_min	= 12,
+		.half_fifo_size	= 512,
+	}, {
+		.name		= "pci9118hr",
+		.vendor_id	= PCI_VENDOR_ID_AMCC,
+		.device_id	= 0x80d9,
+		.iorange_amcc	= AMCC_OP_REG_SIZE,
+		.iorange_9118	= IORANGE_9118,
+		.n_aichan	= 16,
+		.n_aichand	= 8,
+		.mux_aichan	= 256,
+		.n_aichanlist	= PCI9118_CHANLEN,
+		.n_aochan	= 2,
+		.ai_maxdata	= 0xffff,
+		.ao_maxdata	= 0x0fff,
+		.rangelist_ai	= &range_pci9118dg_hr,
+		.rangelist_ao	= &range_bipolar10,
+		.ai_ns_min	= 10000,
+		.ai_pacer_min	= 40,
+		.half_fifo_size	= 512,
+	},
+};
+
+static struct comedi_driver adl_pci9118_driver = {
+	.driver_name	= "adl_pci9118",
+	.module		= THIS_MODULE,
+	.attach		= pci9118_attach,
+	.detach		= pci9118_detach,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.board_name	= &boardtypes[0].name,
+	.offset		= sizeof(struct boardtype),
+};
+
+static int __devinit adl_pci9118_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &adl_pci9118_driver);
 }
 
-/*
-==============================================================================
-*/
+static void __devexit adl_pci9118_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(adl_pci9118_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMCC, 0x80d9) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, adl_pci9118_pci_table);
+
+static struct pci_driver adl_pci9118_pci_driver = {
+	.name		= "adl_pci9118",
+	.id_table	= adl_pci9118_pci_table,
+	.probe		= adl_pci9118_pci_probe,
+	.remove		= __devexit_p(adl_pci9118_pci_remove),
+};
+module_comedi_pci_driver(adl_pci9118_driver, adl_pci9118_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c
index 5361f318b010..7d585a12050f 100644
--- a/drivers/staging/comedi/drivers/adq12b.c
+++ b/drivers/staging/comedi/drivers/adq12b.c
@@ -125,24 +125,6 @@ struct adq12b_board {
 	int do_chans;
 };
 
-static const struct adq12b_board adq12b_boards[] = {
-	{
-	 .name = "adq12b",
-	 .ai_se_chans = 16,
-	 .ai_diff_chans = 8,
-	 .ai_bits = 12,
-	 .di_chans = 5,
-	 .do_chans = 8}
-/* potentially, more adq-based deviced will be added */
-/*,
-	.name = "adq12b",
-	.ai_chans = 16,  // this is just for reference, hardcoded again later
-	.ai_bits = 12,
-	.di_chans = 8,
-	.do_chans = 5
-	}*/
-};
-
 #define thisboard ((const struct adq12b_board *)dev->board_ptr)
 
 struct adq12b_private {
@@ -156,41 +138,88 @@ struct adq12b_private {
 #define devpriv ((struct adq12b_private *)dev->private)
 
 /*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
+ * "instructions" read/write data in "one-shot" or "software-triggered"
+ * mode.
  */
-static int adq12b_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int adq12b_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_adq12b = {
-	.driver_name = "adq12b",
-	.module = THIS_MODULE,
-	.attach = adq12b_attach,
-	.detach = adq12b_detach,
-	.board_name = &adq12b_boards[0].name,
-	.offset = sizeof(struct adq12b_board),
-	.num_names = ARRAY_SIZE(adq12b_boards),
-};
 
 static int adq12b_ai_rinsn(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data);
+			   unsigned int *data)
+{
+	int n, i;
+	int range, channel;
+	unsigned char hi, lo, status;
+
+	/* change channel and range only if it is different from the previous */
+	range = CR_RANGE(insn->chanspec);
+	channel = CR_CHAN(insn->chanspec);
+	if (channel != devpriv->last_channel || range != devpriv->last_range) {
+		outb((range << 4) | channel, dev->iobase + ADQ12B_CTREG);
+		udelay(50);	/* wait for the mux to settle */
+	}
+
+	/* trigger conversion */
+	status = inb(dev->iobase + ADQ12B_ADLOW);
+
+	/* convert n samples */
+	for (n = 0; n < insn->n; n++) {
+
+		/* wait for end of conversion */
+		i = 0;
+		do {
+			/* udelay(1); */
+			status = inb(dev->iobase + ADQ12B_STINR);
+			status = status & ADQ12B_EOC;
+		} while (status == 0 && ++i < TIMEOUT);
+		/* } while (++i < 10); */
+
+		/* read data */
+		hi = inb(dev->iobase + ADQ12B_ADHIG);
+		lo = inb(dev->iobase + ADQ12B_ADLOW);
+
+		/* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n",
+		       channel, range, status,  hi, lo); */
+		data[n] = (hi << 8) | lo;
+
+	}
+
+	/* return the number of samples read/written */
+	return n;
+}
+
 static int adq12b_di_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
+			       struct comedi_insn *insn, unsigned int *data)
+{
+
+	/* only bits 0-4 have information about digital inputs */
+	data[1] = (inb(dev->iobase + ADQ12B_STINR) & (0x1f));
+
+	return 2;
+}
+
 static int adq12b_do_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
+			       struct comedi_insn *insn, unsigned int *data)
+{
+	int channel;
+
+	for (channel = 0; channel < 8; channel++)
+		if (((data[0] >> channel) & 0x01) != 0)
+			outb((((data[1] >> channel) & 0x01) << 3) | channel,
+			     dev->iobase + ADQ12B_OUTBR);
+
+	/* store information to retrieve when asked for reading */
+	if (data[0]) {
+		devpriv->digital_state &= ~data[0];
+		devpriv->digital_state |= (data[0] & data[1]);
+	}
+
+	data[1] = devpriv->digital_state;
+
+	return 2;
+}
 
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
 static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
@@ -295,125 +324,34 @@ static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int adq12b_detach(struct comedi_device *dev)
+static void adq12b_detach(struct comedi_device *dev)
 {
 	if (dev->iobase)
 		release_region(dev->iobase, ADQ12B_SIZE);
-
 	kfree(devpriv);
-
-	printk(KERN_INFO "comedi%d: adq12b: removed\n", dev->minor);
-
-	return 0;
-}
-
-/*
- * "instructions" read/write data in "one-shot" or "software-triggered"
- * mode.
- */
-
-static int adq12b_ai_rinsn(struct comedi_device *dev,
-			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data)
-{
-	int n, i;
-	int range, channel;
-	unsigned char hi, lo, status;
-
-	/* change channel and range only if it is different from the previous */
-	range = CR_RANGE(insn->chanspec);
-	channel = CR_CHAN(insn->chanspec);
-	if (channel != devpriv->last_channel || range != devpriv->last_range) {
-		outb((range << 4) | channel, dev->iobase + ADQ12B_CTREG);
-		udelay(50);	/* wait for the mux to settle */
-	}
-
-	/* trigger conversion */
-	status = inb(dev->iobase + ADQ12B_ADLOW);
-
-	/* convert n samples */
-	for (n = 0; n < insn->n; n++) {
-
-		/* wait for end of conversion */
-		i = 0;
-		do {
-			/* udelay(1); */
-			status = inb(dev->iobase + ADQ12B_STINR);
-			status = status & ADQ12B_EOC;
-		} while (status == 0 && ++i < TIMEOUT);
-		/* } while (++i < 10); */
-
-		/* read data */
-		hi = inb(dev->iobase + ADQ12B_ADHIG);
-		lo = inb(dev->iobase + ADQ12B_ADLOW);
-
-		/* printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n",
-		       channel, range, status,  hi, lo); */
-		data[n] = (hi << 8) | lo;
-
-	}
-
-	/* return the number of samples read/written */
-	return n;
-}
-
-static int adq12b_di_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-
-	/* only bits 0-4 have information about digital inputs */
-	data[1] = (inb(dev->iobase + ADQ12B_STINR) & (0x1f));
-
-	return 2;
 }
 
-static int adq12b_do_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-	int channel;
-
-	for (channel = 0; channel < 8; channel++)
-		if (((data[0] >> channel) & 0x01) != 0)
-			outb((((data[1] >> channel) & 0x01) << 3) | channel,
-			     dev->iobase + ADQ12B_OUTBR);
-
-	/* store information to retrieve when asked for reading */
-	if (data[0]) {
-		devpriv->digital_state &= ~data[0];
-		devpriv->digital_state |= (data[0] & data[1]);
-	}
-
-	data[1] = devpriv->digital_state;
-
-	return 2;
-}
-
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __init driver_adq12b_init_module(void)
-{
-	return comedi_driver_register(&driver_adq12b);
-}
-
-static void __exit driver_adq12b_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_adq12b);
-}
+static const struct adq12b_board adq12b_boards[] = {
+	{
+		.name		= "adq12b",
+		.ai_se_chans	= 16,
+		.ai_diff_chans	= 8,
+		.ai_bits	= 12,
+		.di_chans	= 5,
+		.do_chans	= 8,
+	},
+};
 
-module_init(driver_adq12b_init_module);
-module_exit(driver_adq12b_cleanup_module);
+static struct comedi_driver adq12b_driver = {
+	.driver_name	= "adq12b",
+	.module		= THIS_MODULE,
+	.attach		= adq12b_attach,
+	.detach		= adq12b_detach,
+	.board_name	= &adq12b_boards[0].name,
+	.offset		= sizeof(struct adq12b_board),
+	.num_names	= ARRAY_SIZE(adq12b_boards),
+};
+module_comedi_driver(adq12b_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 8318c82a555a..de8c98cfe367 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -191,10 +191,6 @@ static const struct comedi_lrange range_pci171x_da = { 2, {
 							   }
 };
 
-static int pci1710_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci1710_detach(struct comedi_device *dev);
-
 struct boardtype {
 	const char *name;	/*  board name */
 	int device_id;
@@ -216,17 +212,6 @@ struct boardtype {
 	unsigned int fifo_half_size;	/*  size of FIFO/2 */
 };
 
-static DEFINE_PCI_DEVICE_TABLE(pci1710_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1710) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1711) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1713) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1720) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1731) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci1710_pci_table);
-
 static const struct boardtype boardtypes[] = {
 	{"pci1710", 0x1710,
 	 IORANGE_171x, 1, TYPE_PCI171X,
@@ -264,18 +249,6 @@ static const struct boardtype boardtypes[] = {
 	{.name = DRV_NAME},
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
-
-static struct comedi_driver driver_pci1710 = {
-	.driver_name = DRV_NAME,
-	.module = THIS_MODULE,
-	.attach = pci1710_attach,
-	.detach = pci1710_detach,
-	.num_names = n_boardtypes,
-	.board_name = &boardtypes[0].name,
-	.offset = sizeof(struct boardtype),
-};
-
 struct pci1710_private {
 	struct pci_dev *pcidev;	/*  ptr to PCI device */
 	char valid;		/*  card is usable */
@@ -676,7 +649,9 @@ static void interrupt_pci1710_every_sample(void *d)
 			     s->async->buf_int_count, s->async->buf_int_ptr,
 			     s->async->buf_user_count, s->async->buf_user_ptr);
 			DPRINTK("adv_pci1710 EDBG: EOS2\n");
-			if ((!devpriv->neverending_ai) && (devpriv->ai_act_scan >= devpriv->ai_scans)) {	/*  all data sampled */
+			if ((!devpriv->neverending_ai) &&
+			    (devpriv->ai_act_scan >= devpriv->ai_scans)) {
+				/*  all data sampled */
 				pci171x_ai_cancel(dev, s);
 				s->async->events |= COMEDI_CB_EOA;
 				comedi_event(dev, s);
@@ -804,8 +779,8 @@ static irqreturn_t interrupt_service_pci1710(int irq, void *d)
 		irq);
 	if (!dev->attached)	/*  is device attached? */
 		return IRQ_NONE;	/*  no, exit */
-
-	if (!(inw(dev->iobase + PCI171x_STATUS) & Status_IRQ))	/*  is this interrupt from our board? */
+	/*  is this interrupt from our board? */
+	if (!(inw(dev->iobase + PCI171x_STATUS) & Status_IRQ))
 		return IRQ_NONE;	/*  no, exit */
 
 	DPRINTK("adv_pci1710 EDBG: interrupt_service_pci1710() ST: %4x\n",
@@ -814,7 +789,7 @@ static irqreturn_t interrupt_service_pci1710(int irq, void *d)
 	if (devpriv->ai_et) {	/*  Switch from initial TRIG_EXT to TRIG_xxx. */
 		devpriv->ai_et = 0;
 		devpriv->CntrlReg &= Control_CNT0;
-		devpriv->CntrlReg |= Control_SW;	/*  set software trigger */
+		devpriv->CntrlReg |= Control_SW; /* set software trigger */
 		outw(devpriv->CntrlReg, dev->iobase + PCI171x_CONTROL);
 		devpriv->CntrlReg = devpriv->ai_et_CntrlReg;
 		outb(0, dev->iobase + PCI171x_CLRFIFO);
@@ -865,7 +840,8 @@ static int pci171x_ai_docmd_and_mode(int mode, struct comedi_device *dev,
 	devpriv->neverending_ai = 0;
 
 	devpriv->CntrlReg &= Control_CNT0;
-	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {	/*  don't we want wake up every scan?            devpriv->ai_eos=1; */
+	/*  don't we want wake up every scan?  devpriv->ai_eos=1; */
+	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {
 		devpriv->ai_eos = 1;
 	} else {
 		devpriv->CntrlReg |= Control_ONEFH;
@@ -982,13 +958,13 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev,
 #ifdef PCI171X_EXTDEBUG
 		pci171x_cmdtest_out(1, cmd);
 #endif
-		DPRINTK
-		    ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=1\n",
-		     err);
+		DPRINTK(
+		"adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=1\n",
+		err);
 		return 1;
 	}
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/* step2: make sure trigger srcs are unique and mutually compatible */
 
 	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) {
 		cmd->start_src = TRIG_NOW;
@@ -1015,9 +991,9 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev,
 #ifdef PCI171X_EXTDEBUG
 		pci171x_cmdtest_out(2, cmd);
 #endif
-		DPRINTK
-		    ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=2\n",
-		     err);
+		DPRINTK(
+		"adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=2\n",
+		err);
 		return 2;
 	}
 
@@ -1065,9 +1041,9 @@ static int pci171x_ai_cmdtest(struct comedi_device *dev,
 #ifdef PCI171X_EXTDEBUG
 		pci171x_cmdtest_out(3, cmd);
 #endif
-		DPRINTK
-		    ("adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=3\n",
-		     err);
+		DPRINTK(
+		"adv_pci1710 EDBG: BGN: pci171x_ai_cmdtest(...) err=%d ret=3\n",
+		err);
 		return 3;
 	}
 
@@ -1160,48 +1136,41 @@ static int check_channel_list(struct comedi_device *dev,
 		return 0;
 	}
 
-	if (n_chan > 1) {
-		chansegment[0] = chanlist[0];	/*  first channel is every time ok */
-		for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {	/*  build part of chanlist */
-			/*  printk("%d. %d %d\n",i,CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
-			if (chanlist[0] == chanlist[i])
-				break;	/*  we detect loop, this must by finish */
-			if (CR_CHAN(chanlist[i]) & 1)	/*  odd channel cann't by differencial */
-				if (CR_AREF(chanlist[i]) == AREF_DIFF) {
-					comedi_error(dev,
-						     "Odd channel can't be differential input!\n");
-					return 0;
-				}
-			nowmustbechan =
-			    (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
-			if (CR_AREF(chansegment[i - 1]) == AREF_DIFF)
-				nowmustbechan = (nowmustbechan + 1) % s->n_chan;
-			if (nowmustbechan != CR_CHAN(chanlist[i])) {	/*  channel list isn't continuous :-( */
-				printk
-				    ("channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
-				     i, CR_CHAN(chanlist[i]), nowmustbechan,
-				     CR_CHAN(chanlist[0]));
-				return 0;
-			}
-			chansegment[i] = chanlist[i];	/*  well, this is next correct channel in list */
+	if (n_chan == 1)
+		return 1; /* seglen=1 */
+
+	chansegment[0] = chanlist[0]; /*  first channel is every time ok */
+	for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {
+		if (chanlist[0] == chanlist[i])
+			break;	/*  we detected a loop, stop */
+		if ((CR_CHAN(chanlist[i]) & 1) &&
+		    (CR_AREF(chanlist[i]) == AREF_DIFF)) {
+			comedi_error(dev, "Odd channel cannot be differential input!\n");
+			return 0;
 		}
+		nowmustbechan = (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
+		if (CR_AREF(chansegment[i - 1]) == AREF_DIFF)
+			nowmustbechan = (nowmustbechan + 1) % s->n_chan;
+		if (nowmustbechan != CR_CHAN(chanlist[i])) {
+			printk("channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
+			       i, CR_CHAN(chanlist[i]), nowmustbechan,
+			       CR_CHAN(chanlist[0]));
+			return 0;
+		}
+		chansegment[i] = chanlist[i]; /* next correct channel in list */
+	}
 
-		for (i = 0, segpos = 0; i < n_chan; i++) {	/*  check whole chanlist */
-			/* printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
-			if (chanlist[i] != chansegment[i % seglen]) {
-				printk
-				    ("bad channel, reference or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
-				     i, CR_CHAN(chansegment[i]),
-				     CR_RANGE(chansegment[i]),
-				     CR_AREF(chansegment[i]),
-				     CR_CHAN(chanlist[i % seglen]),
-				     CR_RANGE(chanlist[i % seglen]),
-				     CR_AREF(chansegment[i % seglen]));
-				return 0;	/*  chan/gain list is strange */
-			}
+	for (i = 0, segpos = 0; i < n_chan; i++) {
+		if (chanlist[i] != chansegment[i % seglen]) {
+			printk("bad channel, reference or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
+			       i, CR_CHAN(chansegment[i]),
+			       CR_RANGE(chansegment[i]),
+			       CR_AREF(chansegment[i]),
+			       CR_CHAN(chanlist[i % seglen]),
+			       CR_RANGE(chanlist[i % seglen]),
+			       CR_AREF(chansegment[i % seglen]));
+			return 0;
 		}
-	} else {
-		seglen = 1;
 	}
 	return seglen;
 }
@@ -1221,14 +1190,14 @@ static void setup_channel_list(struct comedi_device *dev,
 	DPRINTK("SegLen: %d\n", seglen);
 	for (i = 0; i < seglen; i++) {	/*  store range list to card */
 		chanprog = muxonechan[CR_CHAN(chanlist[i])];
-		outw(chanprog, dev->iobase + PCI171x_MUX);	/* select channel */
+		outw(chanprog, dev->iobase + PCI171x_MUX); /* select channel */
 		range = this_board->rangecode_ai[CR_RANGE(chanlist[i])];
 		if (CR_AREF(chanlist[i]) == AREF_DIFF)
 			range |= 0x0020;
-		outw(range, dev->iobase + PCI171x_RANGE);	/* select gain */
+		outw(range, dev->iobase + PCI171x_RANGE); /* select gain */
 #ifdef PCI171x_PARANOIDCHECK
 		devpriv->act_chanlist[i] =
-		    (CR_CHAN(chanlist[i]) << 12) & 0xf000;
+			(CR_CHAN(chanlist[i]) << 12) & 0xf000;
 #endif
 		DPRINTK("GS: %2d. [%4x]=%4x %4x\n", i, chanprog, range,
 			devpriv->act_chanlist[i]);
@@ -1236,13 +1205,14 @@ static void setup_channel_list(struct comedi_device *dev,
 #ifdef PCI171x_PARANOIDCHECK
 	for ( ; i < n_chan; i++) { /* store remainder of channel list */
 		devpriv->act_chanlist[i] =
-		    (CR_CHAN(chanlist[i]) << 12) & 0xf000;
+			(CR_CHAN(chanlist[i]) << 12) & 0xf000;
 	}
 #endif
 
 	devpriv->ai_et_MuxVal =
-	    CR_CHAN(chanlist[0]) | (CR_CHAN(chanlist[seglen - 1]) << 8);
-	outw(devpriv->ai_et_MuxVal, dev->iobase + PCI171x_MUX);	/* select channel interval to scan */
+		CR_CHAN(chanlist[0]) | (CR_CHAN(chanlist[seglen - 1]) << 8);
+	/* select channel interval to scan */
+	outw(devpriv->ai_et_MuxVal, dev->iobase + PCI171x_MUX);
 	DPRINTK("MUX: %4x L%4x.H%4x\n",
 		CR_CHAN(chanlist[0]) | (CR_CHAN(chanlist[seglen - 1]) << 8),
 		CR_CHAN(chanlist[0]), CR_CHAN(chanlist[seglen - 1]));
@@ -1365,9 +1335,6 @@ static int pci1710_reset(struct comedi_device *dev)
 	DPRINTK("adv_pci1710 EDBG: END: pci1710_reset(...)\n");
 }
 
-/*
-==============================================================================
-*/
 static int pci1710_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@@ -1398,13 +1365,13 @@ static int pci1710_attach(struct comedi_device *dev,
 	while (NULL != (pcidev = pci_get_device(PCI_VENDOR_ID_ADVANTECH,
 						PCI_ANY_ID, pcidev))) {
 		if (strcmp(this_board->name, DRV_NAME) == 0) {
-			for (i = 0; i < n_boardtypes; ++i) {
+			for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) {
 				if (pcidev->device == boardtypes[i].device_id) {
 					board_index = i;
 					break;
 				}
 			}
-			if (i == n_boardtypes)
+			if (i == ARRAY_SIZE(boardtypes))
 				continue;
 		} else {
 			if (pcidev->device != boardtypes[board_index].device_id)
@@ -1584,12 +1551,8 @@ static int pci1710_attach(struct comedi_device *dev,
 	return 0;
 }
 
-/*
-==============================================================================
-*/
-static int pci1710_detach(struct comedi_device *dev)
+static void pci1710_detach(struct comedi_device *dev)
 {
-
 	if (dev->private) {
 		if (devpriv->valid)
 			pci1710_reset(dev);
@@ -1598,57 +1561,49 @@ static int pci1710_detach(struct comedi_device *dev)
 		if (devpriv->pcidev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pcidev);
-
 			pci_dev_put(devpriv->pcidev);
 		}
 	}
-
-	return 0;
 }
 
-/*
-==============================================================================
-*/
-static int __devinit driver_pci1710_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
+static struct comedi_driver adv_pci1710_driver = {
+	.driver_name	= "adv_pci1710",
+	.module		= THIS_MODULE,
+	.attach		= pci1710_attach,
+	.detach		= pci1710_detach,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.board_name	= &boardtypes[0].name,
+	.offset		= sizeof(struct boardtype),
+};
+
+static int __devinit adv_pci1710_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pci1710.driver_name);
+	return comedi_pci_auto_config(dev, &adv_pci1710_driver);
 }
 
-static void __devexit driver_pci1710_pci_remove(struct pci_dev *dev)
+static void __devexit adv_pci1710_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_pci1710_pci_driver = {
-	.id_table = pci1710_pci_table,
-	.probe = &driver_pci1710_pci_probe,
-	.remove = __devexit_p(&driver_pci1710_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adv_pci1710_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1710) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1711) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1713) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1720) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1731) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adv_pci1710_pci_table);
 
-static int __init driver_pci1710_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci1710);
-	if (retval < 0)
-		return retval;
-
-	driver_pci1710_pci_driver.name = (char *)driver_pci1710.driver_name;
-	return pci_register_driver(&driver_pci1710_pci_driver);
-}
-
-static void __exit driver_pci1710_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci1710_pci_driver);
-	comedi_driver_unregister(&driver_pci1710);
-}
-
-module_init(driver_pci1710_init_module);
-module_exit(driver_pci1710_cleanup_module);
-/*
-==============================================================================
-*/
+static struct pci_driver adv_pci1710_pci_driver = {
+	.name		= "adv_pci1710",
+	.id_table	= adv_pci1710_pci_table,
+	.probe		= adv_pci1710_pci_probe,
+	.remove		= __devexit_p(adv_pci1710_pci_remove),
+};
+module_comedi_pci_driver(adv_pci1710_driver, adv_pci1710_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c
index 29455a8e88b4..336addcbce3a 100644
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@@ -150,36 +150,6 @@ static const struct pci1723_board boardtypes[] = {
 	 },
 };
 
-/*
- * This is used by modprobe to translate PCI IDs to drivers.
- * Should only be used for PCI and ISA-PnP devices
- */
-static DEFINE_PCI_DEVICE_TABLE(pci1723_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1723) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci1723_pci_table);
-
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pci1723_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci1723_detach(struct comedi_device *dev);
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pci1723_board))
-
-static struct comedi_driver driver_pci1723 = {
-	.driver_name = "adv_pci1723",
-	.module = THIS_MODULE,
-	.attach = pci1723_attach,
-	.detach = pci1723_detach,
-};
-
 /* This structure is for data unique to this hardware driver. */
 struct pci1723_private {
 	int valid;		/* card is usable; */
@@ -319,10 +289,6 @@ static int pci1723_dio_insn_bits(struct comedi_device *dev,
 	return 2;
 }
 
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a pci1723 board.
- */
 static int pci1723_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@@ -465,73 +431,50 @@ static int pci1723_attach(struct comedi_device *dev,
 	return 0;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pci1723_detach(struct comedi_device *dev)
+static void pci1723_detach(struct comedi_device *dev)
 {
-	printk(KERN_ERR "comedi%d: pci1723: remove\n", dev->minor);
-
 	if (dev->private) {
 		if (devpriv->valid)
 			pci1723_reset(dev);
-
 		if (devpriv->pcidev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pcidev);
 			pci_dev_put(devpriv->pcidev);
 		}
 	}
-
-	return 0;
 }
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __devinit driver_pci1723_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
+static struct comedi_driver adv_pci1723_driver = {
+	.driver_name	= "adv_pci1723",
+	.module		= THIS_MODULE,
+	.attach		= pci1723_attach,
+	.detach		= pci1723_detach,
+};
+
+static int __devinit adv_pci1723_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pci1723.driver_name);
+	return comedi_pci_auto_config(dev, &adv_pci1723_driver);
 }
 
-static void __devexit driver_pci1723_pci_remove(struct pci_dev *dev)
+static void __devexit adv_pci1723_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_pci1723_pci_driver = {
-	.id_table = pci1723_pci_table,
-	.probe = &driver_pci1723_pci_probe,
-	.remove = __devexit_p(&driver_pci1723_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adv_pci1723_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1723) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adv_pci1723_pci_table);
 
-static int __init driver_pci1723_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci1723);
-	if (retval < 0)
-		return retval;
-
-	driver_pci1723_pci_driver.name = (char *)driver_pci1723.driver_name;
-	return pci_register_driver(&driver_pci1723_pci_driver);
-}
-
-static void __exit driver_pci1723_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci1723_pci_driver);
-	comedi_driver_unregister(&driver_pci1723);
-}
-
-module_init(driver_pci1723_init_module);
-module_exit(driver_pci1723_cleanup_module);
+static struct pci_driver adv_pci1723_pci_driver = {
+	.name		= "adv_pci1723",
+	.id_table	= adv_pci1723_pci_table,
+	.probe		= adv_pci1723_pci_probe,
+	.remove		= __devexit_p(adv_pci1723_pci_remove),
+};
+module_comedi_pci_driver(adv_pci1723_driver, adv_pci1723_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c
index 7af068f4a749..43a32dc12cde 100644
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@@ -237,10 +237,6 @@ enum hw_io_access {
 
 #define OMBCMD_RETRY	0x03	/* 3 times try request before error */
 
-static int pci_dio_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pci_dio_detach(struct comedi_device *dev);
-
 struct diosubd_data {
 	int chans;		/*  num of chans */
 	int addr;		/*  PCI address ofset */
@@ -263,26 +259,6 @@ struct dio_boardtype {
 	enum hw_io_access io_access;
 };
 
-static DEFINE_PCI_DEVICE_TABLE(pci_dio_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1730) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1733) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1734) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1735) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1736) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1739) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1750) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1751) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1752) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1753) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1754) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1756) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1760) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1762) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_dio_pci_table);
-
 static const struct dio_boardtype boardtypes[] = {
 	{"pci1730", PCI_VENDOR_ID_ADVANTECH, 0x1730, PCIDIO_MAINREG,
 	 TYPE_PCI1730,
@@ -406,15 +382,6 @@ static const struct dio_boardtype boardtypes[] = {
 	 IO_16b}
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct dio_boardtype))
-
-static struct comedi_driver driver_pci_dio = {
-	.driver_name = "adv_pci_dio",
-	.module = THIS_MODULE,
-	.attach = pci_dio_attach,
-	.detach = pci_dio_detach
-};
-
 struct pci_dio_private {
 	struct pci_dio_private *prev;	/*  previous private struct */
 	struct pci_dio_private *next;	/*  next private struct */
@@ -1116,9 +1083,6 @@ static int CheckAndAllocCard(struct comedi_device *dev,
 	return 1;
 }
 
-/*
-==============================================================================
-*/
 static int pci_dio_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@@ -1134,7 +1098,7 @@ static int pci_dio_attach(struct comedi_device *dev,
 
 	for_each_pci_dev(pcidev) {
 		/*  loop through cards supported by this driver */
-		for (i = 0; i < n_boardtypes; ++i) {
+		for (i = 0; i < ARRAY_SIZE(boardtypes); ++i) {
 			if (boardtypes[i].vendor_id != pcidev->vendor)
 				continue;
 			if (boardtypes[i].device_id != pcidev->device)
@@ -1162,7 +1126,7 @@ static int pci_dio_attach(struct comedi_device *dev,
 		return -EIO;
 	}
 
-	if (comedi_pci_enable(pcidev, driver_pci_dio.driver_name)) {
+	if (comedi_pci_enable(pcidev, dev->driver->driver_name)) {
 		dev_err(dev->hw_dev, "Error: Can't enable PCI device and request regions!\n");
 		return -EIO;
 	}
@@ -1246,10 +1210,7 @@ static int pci_dio_attach(struct comedi_device *dev,
 	return 0;
 }
 
-/*
-==============================================================================
-*/
-static int pci_dio_detach(struct comedi_device *dev)
+static void pci_dio_detach(struct comedi_device *dev)
 {
 	int i, j;
 	struct comedi_subdevice *s;
@@ -1258,20 +1219,14 @@ static int pci_dio_detach(struct comedi_device *dev)
 	if (dev->private) {
 		if (devpriv->valid)
 			pci_dio_reset(dev);
-
-
-		/* This shows the silliness of using this kind of
-		 * scheme for numbering subdevices.  Don't do it.  --ds */
 		subdev = 0;
 		for (i = 0; i < MAX_DI_SUBDEVS; i++) {
 			if (this_board->sdi[i].chans)
 				subdev++;
-
 		}
 		for (i = 0; i < MAX_DO_SUBDEVS; i++) {
 			if (this_board->sdo[i].chans)
 				subdev++;
-
 		}
 		for (i = 0; i < MAX_DIO_SUBDEVG; i++) {
 			for (j = 0; j < this_board->sdio[i].regs; j++) {
@@ -1280,82 +1235,73 @@ static int pci_dio_detach(struct comedi_device *dev)
 				subdev++;
 			}
 		}
-
 		if (this_board->boardid.chans)
 			subdev++;
-
 		for (i = 0; i < MAX_8254_SUBDEVS; i++)
 			if (this_board->s8254[i].chans)
 				subdev++;
-
 		for (i = 0; i < dev->n_subdevices; i++) {
 			s = dev->subdevices + i;
 			s->private = NULL;
 		}
-
 		if (devpriv->pcidev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pcidev);
-
 			pci_dev_put(devpriv->pcidev);
 		}
-
 		if (devpriv->prev)
 			devpriv->prev->next = devpriv->next;
 		else
 			pci_priv = devpriv->next;
-
 		if (devpriv->next)
 			devpriv->next->prev = devpriv->prev;
-
 	}
-
-	return 0;
 }
 
-/*
-==============================================================================
-*/
-static int __devinit driver_pci_dio_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
+static struct comedi_driver adv_pci_dio_driver = {
+	.driver_name	= "adv_pci_dio",
+	.module		= THIS_MODULE,
+	.attach		= pci_dio_attach,
+	.detach		= pci_dio_detach
+};
+
+static int __devinit adv_pci_dio_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pci_dio.driver_name);
+	return comedi_pci_auto_config(dev, &adv_pci_dio_driver);
 }
 
-static void __devexit driver_pci_dio_pci_remove(struct pci_dev *dev)
+static void __devexit adv_pci_dio_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_pci_dio_pci_driver = {
-	.id_table = pci_dio_pci_table,
-	.probe = &driver_pci_dio_pci_probe,
-	.remove = __devexit_p(&driver_pci_dio_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(adv_pci_dio_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1730) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1733) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1734) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1735) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1736) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1739) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1750) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1751) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1752) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1753) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1754) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1756) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1760) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ADVANTECH, 0x1762) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, adv_pci_dio_pci_table);
 
-static int __init driver_pci_dio_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pci_dio);
-	if (retval < 0)
-		return retval;
-
-	driver_pci_dio_pci_driver.name = (char *)driver_pci_dio.driver_name;
-	return pci_register_driver(&driver_pci_dio_pci_driver);
-}
-
-static void __exit driver_pci_dio_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pci_dio_pci_driver);
-	comedi_driver_unregister(&driver_pci_dio);
-}
-
-module_init(driver_pci_dio_init_module);
-module_exit(driver_pci_dio_cleanup_module);
-/*
-==============================================================================
-*/
+static struct pci_driver adv_pci_dio_pci_driver = {
+	.name		= "adv_pci_dio",
+	.id_table	= adv_pci_dio_pci_table,
+	.probe		= adv_pci_dio_pci_probe,
+	.remove		= __devexit_p(adv_pci_dio_pci_remove),
+};
+module_comedi_pci_driver(adv_pci_dio_driver, adv_pci_dio_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/aio_aio12_8.c b/drivers/staging/comedi/drivers/aio_aio12_8.c
index b0f98e5e4bf3..64d82bc4ffe4 100644
--- a/drivers/staging/comedi/drivers/aio_aio12_8.c
+++ b/drivers/staging/comedi/drivers/aio_aio12_8.c
@@ -209,36 +209,23 @@ static int aio_aio12_8_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int aio_aio12_8_detach(struct comedi_device *dev)
+static void aio_aio12_8_detach(struct comedi_device *dev)
 {
 	subdev_8255_cleanup(dev, &dev->subdevices[2]);
 	if (dev->iobase)
 		release_region(dev->iobase, 24);
-	return 0;
 }
 
-static struct comedi_driver driver_aio_aio12_8 = {
-	.driver_name = "aio_aio12_8",
-	.module = THIS_MODULE,
-	.attach = aio_aio12_8_attach,
-	.detach = aio_aio12_8_detach,
-	.board_name = &board_types[0].name,
-	.num_names = 1,
-	.offset = sizeof(struct aio12_8_boardtype),
+static struct comedi_driver aio_aio12_8_driver = {
+	.driver_name	= "aio_aio12_8",
+	.module		= THIS_MODULE,
+	.attach		= aio_aio12_8_attach,
+	.detach		= aio_aio12_8_detach,
+	.board_name	= &board_types[0].name,
+	.num_names	= ARRAY_SIZE(board_types),
+	.offset		= sizeof(struct aio12_8_boardtype),
 };
-
-static int __init driver_aio_aio12_8_init_module(void)
-{
-	return comedi_driver_register(&driver_aio_aio12_8);
-}
-
-static void __exit driver_aio_aio12_8_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_aio_aio12_8);
-}
-
-module_init(driver_aio_aio12_8_init_module);
-module_exit(driver_aio_aio12_8_cleanup_module);
+module_comedi_driver(aio_aio12_8_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/aio_iiro_16.c b/drivers/staging/comedi/drivers/aio_iiro_16.c
index 160b0a0f4f1e..04f6f94b1f47 100644
--- a/drivers/staging/comedi/drivers/aio_iiro_16.c
+++ b/drivers/staging/comedi/drivers/aio_iiro_16.c
@@ -67,30 +67,41 @@ struct aio_iiro_16_private {
 
 #define	devpriv	((struct aio_iiro_16_private *) dev->private)
 
-static int aio_iiro_16_attach(struct comedi_device *dev,
-			      struct comedi_devconfig *it);
-
-static int aio_iiro_16_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_aio_iiro_16 = {
-	.driver_name = "aio_iiro_16",
-	.module = THIS_MODULE,
-	.attach = aio_iiro_16_attach,
-	.detach = aio_iiro_16_detach,
-	.board_name = &aio_iiro_16_boards[0].name,
-	.offset = sizeof(struct aio_iiro_16_board),
-	.num_names = ARRAY_SIZE(aio_iiro_16_boards),
-};
+static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
+					   struct comedi_subdevice *s,
+					   struct comedi_insn *insn,
+					   unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
+
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= data[0] & data[1];
+		outb(s->state & 0xff, dev->iobase + AIO_IIRO_16_RELAY_0_7);
+		outb((s->state >> 8) & 0xff,
+		     dev->iobase + AIO_IIRO_16_RELAY_8_15);
+	}
+
+	data[1] = s->state;
+
+	return 2;
+}
 
 static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev,
 					  struct comedi_subdevice *s,
 					  struct comedi_insn *insn,
-					  unsigned int *data);
+					  unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
 
-static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
-					   struct comedi_subdevice *s,
-					   struct comedi_insn *insn,
-					   unsigned int *data);
+	data[1] = 0;
+	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_0_7);
+	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_8_15) << 8;
+
+	return 2;
+}
 
 static int aio_iiro_16_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
@@ -138,64 +149,22 @@ static int aio_iiro_16_attach(struct comedi_device *dev,
 	return 1;
 }
 
-static int aio_iiro_16_detach(struct comedi_device *dev)
+static void aio_iiro_16_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: aio_iiro_16: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, AIO_IIRO_16_SIZE);
-
-	return 0;
-}
-
-static int aio_iiro_16_dio_insn_bits_write(struct comedi_device *dev,
-					   struct comedi_subdevice *s,
-					   struct comedi_insn *insn,
-					   unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-		outb(s->state & 0xff, dev->iobase + AIO_IIRO_16_RELAY_0_7);
-		outb((s->state >> 8) & 0xff,
-		     dev->iobase + AIO_IIRO_16_RELAY_8_15);
-	}
-
-	data[1] = s->state;
-
-	return 2;
-}
-
-static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev,
-					  struct comedi_subdevice *s,
-					  struct comedi_insn *insn,
-					  unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = 0;
-	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_0_7);
-	data[1] |= inb(dev->iobase + AIO_IIRO_16_INPUT_8_15) << 8;
-
-	return 2;
-}
-
-static int __init driver_aio_iiro_16_init_module(void)
-{
-	return comedi_driver_register(&driver_aio_iiro_16);
 }
 
-static void __exit driver_aio_iiro_16_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_aio_iiro_16);
-}
-
-module_init(driver_aio_iiro_16_init_module);
-module_exit(driver_aio_iiro_16_cleanup_module);
+static struct comedi_driver aio_iiro_16_driver = {
+	.driver_name	= "aio_iiro_16",
+	.module		= THIS_MODULE,
+	.attach		= aio_iiro_16_attach,
+	.detach		= aio_iiro_16_detach,
+	.board_name	= &aio_iiro_16_boards[0].name,
+	.offset		= sizeof(struct aio_iiro_16_board),
+	.num_names	= ARRAY_SIZE(aio_iiro_16_boards),
+};
+module_comedi_driver(aio_iiro_16_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 566cc4411452..c9c5d97b3ca2 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -217,6 +217,14 @@ order they appear in the channel list.
 
 #define DIO200_DRIVER_NAME	"amplc_dio200"
 
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_DIO200_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_DIO200_PCI
+#endif
+
 /* PCI IDs */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI272 0x000a
@@ -274,10 +282,14 @@ enum dio200_model {
 };
 
 enum dio200_layout {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	pc212_layout,
 	pc214_layout,
+#endif
 	pc215_layout,
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	pc218_layout,
+#endif
 	pc272_layout
 };
 
@@ -290,6 +302,7 @@ struct dio200_board {
 };
 
 static const struct dio200_board dio200_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	{
 	 .name = "pc212e",
 	 .bustype = isa_bustype,
@@ -308,15 +321,6 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pc215e_model,
 	 .layout = pc215_layout,
 	 },
-#ifdef CONFIG_COMEDI_PCI
-	{
-	 .name = "pci215",
-	 .devid = PCI_DEVICE_ID_AMPLICON_PCI215,
-	 .bustype = pci_bustype,
-	 .model = pci215_model,
-	 .layout = pc215_layout,
-	 },
-#endif
 	{
 	 .name = "pc218e",
 	 .bustype = isa_bustype,
@@ -329,7 +333,15 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pc272e_model,
 	 .layout = pc272_layout,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
+	{
+	 .name = "pci215",
+	 .devid = PCI_DEVICE_ID_AMPLICON_PCI215,
+	 .bustype = pci_bustype,
+	 .model = pci215_model,
+	 .layout = pc215_layout,
+	 },
 	{
 	 .name = "pci272",
 	 .devid = PCI_DEVICE_ID_AMPLICON_PCI272,
@@ -337,8 +349,6 @@ static const struct dio200_board dio200_boards[] = {
 	 .model = pci272_model,
 	 .layout = pc272_layout,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = DIO200_DRIVER_NAME,
 	 .devid = PCI_DEVICE_ID_INVALID,
@@ -367,6 +377,7 @@ struct dio200_layout_struct {
 };
 
 static const struct dio200_layout_struct dio200_layouts[] = {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	[pc212_layout] = {
 			  .n_subdevs = 6,
 			  .sdtype = {sd_8255, sd_8254, sd_8254, sd_8254,
@@ -385,6 +396,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 0,
 			  .has_clk_gat_sce = 0,
 			  },
+#endif
 	[pc215_layout] = {
 			  .n_subdevs = 5,
 			  .sdtype = {sd_8255, sd_8255, sd_8254,
@@ -394,6 +406,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 1,
 			  .has_clk_gat_sce = 1,
 			  },
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	[pc218_layout] = {
 			  .n_subdevs = 7,
 			  .sdtype = {sd_8254, sd_8254, sd_8255, sd_8254,
@@ -405,6 +418,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
 			  .has_int_sce = 1,
 			  .has_clk_gat_sce = 1,
 			  },
+#endif
 	[pc272_layout] = {
 			  .n_subdevs = 4,
 			  .sdtype = {sd_8255, sd_8255, sd_8255,
@@ -419,7 +433,7 @@ static const struct dio200_layout_struct dio200_layouts[] = {
  * PCI driver table.
  */
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI215) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI272) },
@@ -427,7 +441,7 @@ static DEFINE_PCI_DEVICE_TABLE(dio200_pci_table) = {
 };
 
 MODULE_DEVICE_TABLE(pci, dio200_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_DIO200_PCI */
 
 /*
  * Useful for shorthand access to the particular board structure
@@ -441,7 +455,7 @@ MODULE_DEVICE_TABLE(pci, dio200_pci_table);
    feel free to suggest moving the variable to the struct comedi_device struct.
  */
 struct dio200_private {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	struct pci_dev *pci_dev;	/* PCI device */
 #endif
 	int intr_sd;
@@ -479,7 +493,7 @@ struct dio200_subdev_intr {
  */
 static int dio200_attach(struct comedi_device *dev,
 			 struct comedi_devconfig *it);
-static int dio200_detach(struct comedi_device *dev);
+static void dio200_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_dio200 = {
 	.driver_name = DIO200_DRIVER_NAME,
 	.module = THIS_MODULE,
@@ -490,12 +504,12 @@ static struct comedi_driver driver_amplc_dio200 = {
 	.num_names = ARRAY_SIZE(dio200_boards),
 };
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static int __devinit driver_amplc_dio200_pci_probe(struct pci_dev *dev,
 						   const struct pci_device_id
 						   *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_dio200.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_dio200);
 }
 
 static void __devexit driver_amplc_dio200_pci_remove(struct pci_dev *dev)
@@ -549,7 +563,7 @@ module_exit(driver_amplc_dio200_cleanup_module);
  * This function looks for a PCI device matching the requested board name,
  * bus and slot.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 static int
 dio200_find_pci(struct comedi_device *dev, int bus, int slot,
 		struct pci_dev **pci_dev_p)
@@ -611,6 +625,7 @@ dio200_find_pci(struct comedi_device *dev, int bus, int slot,
  * This function checks and requests an I/O region, reporting an error
  * if there is a conflict.
  */
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 static int
 dio200_request_region(unsigned minor, unsigned long from, unsigned long extent)
 {
@@ -621,6 +636,7 @@ dio200_request_region(unsigned minor, unsigned long from, unsigned long extent)
 	}
 	return 0;
 }
+#endif
 
 /*
  * 'insn_bits' function for an 'INTERRUPT' subdevice.
@@ -1332,7 +1348,7 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
 	unsigned int irq = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@@ -1354,12 +1370,14 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		irq = it->options[1];
 		share_irq = 0;
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@@ -1382,7 +1400,7 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	devpriv->intr_sd = -1;
 
 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 	if (pci_dev) {
 		ret = comedi_pci_enable(pci_dev, DIO200_DRIVER_NAME);
 		if (ret < 0) {
@@ -1396,9 +1414,11 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 		ret = dio200_request_region(dev->minor, iobase, DIO200_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;
 
@@ -1474,12 +1494,19 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	}
 
 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
+		break;
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
+	case pci_bustype:
 		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+	default:
+		break;
 	}
 	if (irq)
 		printk("(irq %u%s) ", irq, (dev->irq ? "" : " UNAVAILABLE"));
@@ -1491,22 +1518,11 @@ static int dio200_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int dio200_detach(struct comedi_device *dev)
+static void dio200_detach(struct comedi_device *dev)
 {
 	const struct dio200_layout_struct *layout;
 	unsigned n;
 
-	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor,
-	       DIO200_DRIVER_NAME);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if (dev->subdevices) {
@@ -1529,7 +1545,7 @@ static int dio200_detach(struct comedi_device *dev)
 		}
 	}
 	if (devpriv) {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@@ -1537,15 +1553,12 @@ static int dio200_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_DIO200_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, DIO200_IO_SIZE);
+#endif
 		}
 	}
-	if (dev->board_name)
-		printk(KERN_INFO "comedi%d: %s removed\n",
-		       dev->minor, dev->board_name);
-
-	return 0;
 }
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index 7972cadd403e..57ba3228b1a9 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -63,6 +63,14 @@ unused.
 
 #define PC236_DRIVER_NAME	"amplc_pc236"
 
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_PC236_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_PC236_PCI
+#endif
+
 /* PCI236 PCI configuration register information */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI236 0x0009
@@ -106,13 +114,15 @@ struct pc236_board {
 	enum pc236_model model;
 };
 static const struct pc236_board pc236_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 	{
 	 .name = "pc36at",
 	 .fancy_name = "PC36AT",
 	 .bustype = isa_bustype,
 	 .model = pc36at_model,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	{
 	 .name = "pci236",
 	 .fancy_name = "PCI236",
@@ -120,8 +130,6 @@ static const struct pc236_board pc236_boards[] = {
 	 .bustype = pci_bustype,
 	 .model = pci236_model,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = PC236_DRIVER_NAME,
 	 .fancy_name = PC236_DRIVER_NAME,
@@ -132,14 +140,14 @@ static const struct pc236_board pc236_boards[] = {
 #endif
 };
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 static DEFINE_PCI_DEVICE_TABLE(pc236_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI236) },
 	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, pc236_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC236_PCI */
 
 /*
  * Useful for shorthand access to the particular board structure
@@ -151,7 +159,7 @@ MODULE_DEVICE_TABLE(pci, pc236_pci_table);
    feel free to suggest moving the variable to the struct comedi_device struct.
  */
 struct pc236_private {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	/* PCI device */
 	struct pci_dev *pci_dev;
 	unsigned long lcr_iobase; /* PLX PCI9052 config registers in PCIBAR1 */
@@ -168,7 +176,7 @@ struct pc236_private {
  * the device code.
  */
 static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int pc236_detach(struct comedi_device *dev);
+static void pc236_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_pc236 = {
 	.driver_name = PC236_DRIVER_NAME,
 	.module = THIS_MODULE,
@@ -179,12 +187,12 @@ static struct comedi_driver driver_amplc_pc236 = {
 	.num_names = ARRAY_SIZE(pc236_boards),
 };
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 static int __devinit driver_amplc_pc236_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_pc236.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_pc236);
 }
 
 static void __devexit driver_amplc_pc236_pci_remove(struct pci_dev *dev)
@@ -234,8 +242,10 @@ module_init(driver_amplc_pc236_init_module);
 module_exit(driver_amplc_pc236_cleanup_module);
 #endif
 
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 static int pc236_request_region(unsigned minor, unsigned long from,
 				unsigned long extent);
+#endif
 static void pc236_intr_disable(struct comedi_device *dev);
 static void pc236_intr_enable(struct comedi_device *dev);
 static int pc236_intr_check(struct comedi_device *dev);
@@ -255,7 +265,7 @@ static irqreturn_t pc236_interrupt(int irq, void *d);
  * This function looks for a PCI device matching the requested board name,
  * bus and slot.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 static int
 pc236_find_pci(struct comedi_device *dev, int bus, int slot,
 	       struct pci_dev **pci_dev_p)
@@ -324,7 +334,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
 	unsigned int irq = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@@ -345,12 +355,14 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	}
 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		irq = it->options[1];
 		share_irq = 0;
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@@ -361,7 +373,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			return ret;
 		devpriv->pci_dev = pci_dev;
 		break;
-#endif /* CONFIG_COMEDI_PCI */
+#endif
 	default:
 		printk(KERN_ERR
 		       "comedi%d: %s: BUG! cannot determine board type!\n",
@@ -376,7 +388,7 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev->board_name = thisboard->name;
 
 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	if (pci_dev) {
 
 		ret = comedi_pci_enable(pci_dev, PC236_DRIVER_NAME);
@@ -392,9 +404,11 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 		ret = pc236_request_region(dev->minor, iobase, PC236_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;
 
@@ -439,12 +453,19 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 	}
 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
+		break;
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
+	case pci_bustype:
 		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+	default:
+		break;
 	}
 	if (irq)
 		printk("(irq %u%s) ", irq, (dev->irq ? "" : " UNAVAILABLE"));
@@ -456,27 +477,16 @@ static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pc236_detach(struct comedi_device *dev)
+static void pc236_detach(struct comedi_device *dev)
 {
-	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor,
-	       PC236_DRIVER_NAME);
 	if (devpriv)
 		pc236_intr_disable(dev);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 0);
 	if (devpriv) {
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@@ -484,21 +494,19 @@ static int pc236_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, PC236_IO_SIZE);
+#endif
 		}
 	}
-	if (dev->board_name) {
-		printk(KERN_INFO "comedi%d: %s removed\n",
-		       dev->minor, dev->board_name);
-	}
-	return 0;
 }
 
 /*
  * This function checks and requests an I/O region, reporting an error
  * if there is a conflict.
  */
+#ifdef CONFIG_COMEDI_AMPLC_PC236_ISA
 static int pc236_request_region(unsigned minor, unsigned long from,
 				unsigned long extent)
 {
@@ -509,6 +517,7 @@ static int pc236_request_region(unsigned minor, unsigned long from,
 	}
 	return 0;
 }
+#endif
 
 /*
  * This function is called to mark the interrupt as disabled (no command
@@ -521,7 +530,7 @@ static void pc236_intr_disable(struct comedi_device *dev)
 
 	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->enable_irq = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	if (devpriv->lcr_iobase)
 		outl(PCI236_INTR_DISABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
 #endif
@@ -539,7 +548,7 @@ static void pc236_intr_enable(struct comedi_device *dev)
 
 	spin_lock_irqsave(&dev->spinlock, flags);
 	devpriv->enable_irq = 1;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 	if (devpriv->lcr_iobase)
 		outl(PCI236_INTR_ENABLE, devpriv->lcr_iobase + PLX9052_INTCSR);
 #endif
@@ -561,7 +570,7 @@ static int pc236_intr_check(struct comedi_device *dev)
 	spin_lock_irqsave(&dev->spinlock, flags);
 	if (devpriv->enable_irq) {
 		retval = 1;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC236_PCI
 		if (devpriv->lcr_iobase) {
 			if ((inl(devpriv->lcr_iobase + PLX9052_INTCSR)
 			     & PLX9052_INTCSR_LI1STAT_MASK)
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index 191ac0d23ce7..974d7450051e 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -50,6 +50,14 @@ The state of the outputs can be read.
 
 #define PC263_DRIVER_NAME	"amplc_pc263"
 
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA_MODULE
+#define CONFIG_COMEDI_AMPLC_PC263_ISA
+#endif
+
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI_MODULE
+#define CONFIG_COMEDI_AMPLC_PC263_PCI
+#endif
+
 /* PCI263 PCI configuration register information */
 #define PCI_VENDOR_ID_AMPLICON 0x14dc
 #define PCI_DEVICE_ID_AMPLICON_PCI263 0x000c
@@ -73,13 +81,15 @@ struct pc263_board {
 	enum pc263_model model;
 };
 static const struct pc263_board pc263_boards[] = {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 	{
 	 .name = "pc263",
 	 .fancy_name = "PC263",
 	 .bustype = isa_bustype,
 	 .model = pc263_model,
 	 },
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	{
 	 .name = "pci263",
 	 .fancy_name = "PCI263",
@@ -87,8 +97,6 @@ static const struct pc263_board pc263_boards[] = {
 	 .bustype = pci_bustype,
 	 .model = pci263_model,
 	 },
-#endif
-#ifdef CONFIG_COMEDI_PCI
 	{
 	 .name = PC263_DRIVER_NAME,
 	 .fancy_name = PC263_DRIVER_NAME,
@@ -99,14 +107,14 @@ static const struct pc263_board pc263_boards[] = {
 #endif
 };
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static DEFINE_PCI_DEVICE_TABLE(pc263_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI263) },
 	{0}
 };
 
 MODULE_DEVICE_TABLE(pci, pc263_pci_table);
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC263_PCI */
 
 /*
  * Useful for shorthand access to the particular board structure
@@ -117,14 +125,14 @@ MODULE_DEVICE_TABLE(pci, pc263_pci_table);
    several hardware drivers keep similar information in this structure,
    feel free to suggest moving the variable to the struct comedi_device struct.
 */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 struct pc263_private {
 	/* PCI device. */
 	struct pci_dev *pci_dev;
 };
 
 #define devpriv ((struct pc263_private *)dev->private)
-#endif /* CONFIG_COMEDI_PCI */
+#endif /* CONFIG_COMEDI_AMPLC_PC263_PCI */
 
 /*
  * The struct comedi_driver structure tells the Comedi core module
@@ -133,7 +141,7 @@ struct pc263_private {
  * the device code.
  */
 static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int pc263_detach(struct comedi_device *dev);
+static void pc263_detach(struct comedi_device *dev);
 static struct comedi_driver driver_amplc_pc263 = {
 	.driver_name = PC263_DRIVER_NAME,
 	.module = THIS_MODULE,
@@ -144,8 +152,10 @@ static struct comedi_driver driver_amplc_pc263 = {
 	.num_names = ARRAY_SIZE(pc263_boards),
 };
 
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 static int pc263_request_region(unsigned minor, unsigned long from,
 				unsigned long extent);
+#endif
 static int pc263_dio_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data);
@@ -157,7 +167,7 @@ static int pc263_dio_insn_config(struct comedi_device *dev,
  * This function looks for a PCI device matching the requested board name,
  * bus and slot.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static int
 pc263_find_pci(struct comedi_device *dev, int bus, int slot,
 	       struct pci_dev **pci_dev_p)
@@ -225,7 +235,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
 	unsigned long iobase = 0;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	struct pci_dev *pci_dev = NULL;
 	int bus = 0, slot = 0;
 #endif
@@ -237,7 +247,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
  * Allocate the private structure area.  alloc_private() is a
  * convenient macro defined in comedidev.h.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	ret = alloc_private(dev, sizeof(struct pc263_private));
 	if (ret < 0) {
 		printk(KERN_ERR "comedi%d: error! out of memory!\n",
@@ -247,10 +257,12 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #endif
 	/* Process options. */
 	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 	case isa_bustype:
 		iobase = it->options[0];
 		break;
-#ifdef CONFIG_COMEDI_PCI
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	case pci_bustype:
 		bus = it->options[0];
 		slot = it->options[1];
@@ -260,7 +272,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			return ret;
 		devpriv->pci_dev = pci_dev;
 		break;
-#endif /* CONFIG_COMEDI_PCI */
+#endif
 	default:
 		printk(KERN_ERR
 		       "comedi%d: %s: BUG! cannot determine board type!\n",
@@ -275,7 +287,7 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev->board_name = thisboard->name;
 
 	/* Enable device and reserve I/O spaces. */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 	if (pci_dev) {
 		ret = comedi_pci_enable(pci_dev, PC263_DRIVER_NAME);
 		if (ret < 0) {
@@ -289,9 +301,11 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	} else
 #endif
 	{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 		ret = pc263_request_region(dev->minor, iobase, PC263_IO_SIZE);
 		if (ret < 0)
 			return ret;
+#endif
 	}
 	dev->iobase = iobase;
 
@@ -322,12 +336,18 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	s->state = s->state | (inb(dev->iobase) << 8);
 
 	printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
-	if (thisboard->bustype == isa_bustype) {
+	switch (thisboard->bustype) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
+	case isa_bustype:
 		printk("(base %#lx) ", iobase);
-	} else {
-#ifdef CONFIG_COMEDI_PCI
+		break;
+#endif
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 		printk("(pci %s) ", pci_name(pci_dev));
+		break;
 #endif
+	default:
+		break;
 	}
 
 	printk("attached\n");
@@ -335,23 +355,13 @@ static int pc263_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pc263_detach(struct comedi_device *dev)
+static void pc263_detach(struct comedi_device *dev)
 {
-	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor,
-	       PC263_DRIVER_NAME);
-
-#ifdef CONFIG_COMEDI_PCI
-	if (devpriv) {
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
+	if (devpriv)
 #endif
-#ifdef CONFIG_COMEDI_PCI
+	{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
@@ -359,21 +369,19 @@ static int pc263_detach(struct comedi_device *dev)
 		} else
 #endif
 		{
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 			if (dev->iobase)
 				release_region(dev->iobase, PC263_IO_SIZE);
+#endif
 		}
 	}
-	if (dev->board_name) {
-		printk(KERN_INFO "comedi%d: %s removed\n",
-		       dev->minor, dev->board_name);
-	}
-	return 0;
 }
 
 /*
  * This function checks and requests an I/O region, reporting an error
  * if there is a conflict.
  */
+#ifdef CONFIG_COMEDI_AMPLC_PC263_ISA
 static int pc263_request_region(unsigned minor, unsigned long from,
 				unsigned long extent)
 {
@@ -384,6 +392,7 @@ static int pc263_request_region(unsigned minor, unsigned long from,
 	}
 	return 0;
 }
+#endif
 
 /* DIO devices are slightly special.  Although it is possible to
  * implement the insn_read/insn_write interface, it is much more
@@ -429,12 +438,12 @@ static int pc263_dio_insn_config(struct comedi_device *dev,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_AMPLC_PC263_PCI
 static int __devinit driver_amplc_pc263_pci_probe(struct pci_dev *dev,
 						  const struct pci_device_id
 						  *ent)
 {
-	return comedi_pci_auto_config(dev, driver_amplc_pc263.driver_name);
+	return comedi_pci_auto_config(dev, &driver_amplc_pc263);
 }
 
 static void __devexit driver_amplc_pc263_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index b278917cec25..fbf19cae8747 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -380,18 +380,6 @@ static const struct pci224_board pci224_boards[] = {
 };
 
 /*
- * PCI driver table.
- */
-
-static DEFINE_PCI_DEVICE_TABLE(pci224_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI224) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI234) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, pci224_pci_table);
-
-/*
  * Useful for shorthand access to the particular board structure
  */
 #define thisboard ((struct pci224_board *)dev->board_ptr)
@@ -422,65 +410,6 @@ struct pci224_private {
 #define devpriv ((struct pci224_private *)dev->private)
 
 /*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pci224_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pci224_detach(struct comedi_device *dev);
-static struct comedi_driver driver_amplc_pci224 = {
-	.driver_name = DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = pci224_attach,
-	.detach = pci224_detach,
-	.board_name = &pci224_boards[0].name,
-	.offset = sizeof(struct pci224_board),
-	.num_names = ARRAY_SIZE(pci224_boards),
-};
-
-static int __devinit driver_amplc_pci224_pci_probe(struct pci_dev *dev,
-						   const struct pci_device_id
-						   *ent)
-{
-	return comedi_pci_auto_config(dev, driver_amplc_pci224.driver_name);
-}
-
-static void __devexit driver_amplc_pci224_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_amplc_pci224_pci_driver = {
-	.id_table = pci224_pci_table,
-	.probe = &driver_amplc_pci224_pci_probe,
-	.remove = __devexit_p(&driver_amplc_pci224_pci_remove)
-};
-
-static int __init driver_amplc_pci224_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_amplc_pci224);
-	if (retval < 0)
-		return retval;
-
-	driver_amplc_pci224_pci_driver.name =
-	    (char *)driver_amplc_pci224.driver_name;
-	return pci_register_driver(&driver_amplc_pci224_pci_driver);
-}
-
-static void __exit driver_amplc_pci224_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_amplc_pci224_pci_driver);
-	comedi_driver_unregister(&driver_amplc_pci224);
-}
-
-module_init(driver_amplc_pci224_init_module);
-module_exit(driver_amplc_pci224_cleanup_module);
-
-/*
  * Called from the 'insn_write' function to perform a single write.
  */
 static void
@@ -1312,6 +1241,20 @@ static irqreturn_t pci224_interrupt(int irq, void *d)
 }
 
 /*
+ * This function looks for a board matching the supplied PCI device.
+ */
+static const struct pci224_board
+*pci224_find_pci_board(struct pci_dev *pci_dev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pci224_boards); i++)
+		if (pci_dev->device == pci224_boards[i].devid)
+			return &pci224_boards[i];
+	return NULL;
+}
+
+/*
  * This function looks for a PCI device matching the requested board name,
  * bus and slot.
  */
@@ -1336,17 +1279,12 @@ pci224_find_pci(struct comedi_device *dev, int bus, int slot,
 		}
 		if (thisboard->model == any_model) {
 			/* Match any supported model. */
-			int i;
-
-			for (i = 0; i < ARRAY_SIZE(pci224_boards); i++) {
-				if (pci_dev->device == pci224_boards[i].devid) {
-					/* Change board_ptr to matched board. */
-					dev->board_ptr = &pci224_boards[i];
-					break;
-				}
-			}
-			if (i == ARRAY_SIZE(pci224_boards))
+			const struct pci224_board *board_ptr;
+			board_ptr = pci224_find_pci_board(pci_dev);
+			if (board_ptr == NULL)
 				continue;
+			/* Change board_ptr to matched board. */
+			dev->board_ptr = board_ptr;
 		} else {
 			/* Match specific model name. */
 			if (thisboard->devid != pci_dev->device)
@@ -1370,35 +1308,16 @@ pci224_find_pci(struct comedi_device *dev, int bus, int slot,
 }
 
 /*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
+ * Common part of attach and attach_pci.
  */
-static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+static int pci224_attach_common(struct comedi_device *dev,
+				struct pci_dev *pci_dev, int *options)
 {
 	struct comedi_subdevice *s;
-	struct pci_dev *pci_dev;
 	unsigned int irq;
-	int bus = 0, slot = 0;
 	unsigned n;
 	int ret;
 
-	printk(KERN_DEBUG "comedi%d: %s: attach\n", dev->minor, DRIVER_NAME);
-
-	bus = it->options[0];
-	slot = it->options[1];
-	ret = alloc_private(dev, sizeof(struct pci224_private));
-	if (ret < 0) {
-		printk(KERN_ERR "comedi%d: error! out of memory!\n",
-		       dev->minor);
-		return ret;
-	}
-
-	ret = pci224_find_pci(dev, bus, slot, &pci_dev);
-	if (ret < 0)
-		return ret;
-
 	devpriv->pci_dev = pci_dev;
 	ret = comedi_pci_enable(pci_dev, DRIVER_NAME);
 	if (ret < 0) {
@@ -1483,24 +1402,26 @@ static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		if (!s->range_table_list)
 			return -ENOMEM;
 
-		for (n = 2; n < 3 + s->n_chan; n++) {
-			if (it->options[n] < 0 || it->options[n] > 1) {
-				printk(KERN_WARNING "comedi%d: %s: warning! "
-				       "bad options[%u]=%d\n",
-				       dev->minor, DRIVER_NAME, n,
-				       it->options[n]);
+		if (options) {
+			for (n = 2; n < 3 + s->n_chan; n++) {
+				if (options[n] < 0 || options[n] > 1) {
+					printk(KERN_WARNING
+					       "comedi%d: %s: warning! bad options[%u]=%d\n",
+					       dev->minor, DRIVER_NAME, n,
+					       options[n]);
+				}
 			}
 		}
 		for (n = 0; n < s->n_chan; n++) {
-			if (n < COMEDI_NDEVCONFOPTS - 3 &&
-			    it->options[3 + n] == 1) {
-				if (it->options[2] == 1)
+			if (n < COMEDI_NDEVCONFOPTS - 3 && options &&
+			    options[3 + n] == 1) {
+				if (options[2] == 1)
 					range_table_list[n] = &range_pci234_ext;
 				else
 					range_table_list[n] = &range_bipolar5;
 
 			} else {
-				if (it->options[2] == 1) {
+				if (options && options[2] == 1) {
 					range_table_list[n] =
 					    &range_pci234_ext2;
 				} else {
@@ -1511,14 +1432,14 @@ static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		devpriv->hwrange = hwrange_pci234;
 	} else {
 		/* PCI224 range options. */
-		if (it->options[2] == 1) {
+		if (options && options[2] == 1) {
 			s->range_table = &range_pci224_external;
 			devpriv->hwrange = hwrange_pci224_external;
 		} else {
-			if (it->options[2] != 0) {
+			if (options && options[2] != 0) {
 				printk(KERN_WARNING "comedi%d: %s: warning! "
 				       "bad options[2]=%d\n",
-				       dev->minor, DRIVER_NAME, it->options[2]);
+				       dev->minor, DRIVER_NAME, options[2]);
 			}
 			s->range_table = &range_pci224_internal;
 			devpriv->hwrange = hwrange_pci224_internal;
@@ -1552,21 +1473,59 @@ static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pci224_detach(struct comedi_device *dev)
+static int pci224_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct pci_dev *pci_dev;
+	int bus, slot;
+	int ret;
+
+	printk(KERN_DEBUG "comedi%d: %s: attach\n", dev->minor, DRIVER_NAME);
+
+	bus = it->options[0];
+	slot = it->options[1];
+	ret = alloc_private(dev, sizeof(struct pci224_private));
+	if (ret < 0) {
+		printk(KERN_ERR "comedi%d: error! out of memory!\n",
+		       dev->minor);
+		return ret;
+	}
+
+	ret = pci224_find_pci(dev, bus, slot, &pci_dev);
+	if (ret < 0)
+		return ret;
+
+	return pci224_attach_common(dev, pci_dev, it->options);
+}
+
+static int
+pci224_attach_pci(struct comedi_device *dev, struct pci_dev *pci_dev)
 {
-	printk(KERN_DEBUG "comedi%d: %s: detach\n", dev->minor, DRIVER_NAME);
+	int ret;
+
+	printk(KERN_DEBUG "comedi%d: %s: attach_pci %s\n", dev->minor,
+	       DRIVER_NAME, pci_name(pci_dev));
+
+	ret = alloc_private(dev, sizeof(struct pci224_private));
+	if (ret < 0) {
+		printk(KERN_ERR "comedi%d: error! out of memory!\n",
+		       dev->minor);
+		return ret;
+	}
 
+	dev->board_ptr = pci224_find_pci_board(pci_dev);
+	if (dev->board_ptr == NULL) {
+		printk(KERN_ERR
+		       "comedi%d: %s: BUG! cannot determine board type!\n",
+		       dev->minor, DRIVER_NAME);
+		return -EINVAL;
+	}
+	return pci224_attach_common(dev, pci_dev, NULL);
+}
+
+static void pci224_detach(struct comedi_device *dev)
+{
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (dev->subdevices) {
 		struct comedi_subdevice *s;
 
@@ -1581,18 +1540,49 @@ static int pci224_detach(struct comedi_device *dev)
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
-
 			pci_dev_put(devpriv->pci_dev);
 		}
 	}
-	if (dev->board_name) {
-		printk(KERN_INFO "comedi%d: %s removed\n",
-		       dev->minor, dev->board_name);
-	}
+}
 
-	return 0;
+static struct comedi_driver amplc_pci224_driver = {
+	.driver_name	= "amplc_pci224",
+	.module		= THIS_MODULE,
+	.attach		= pci224_attach,
+	.detach		= pci224_detach,
+	.attach_pci	= pci224_attach_pci,
+	.board_name	= &pci224_boards[0].name,
+	.offset		= sizeof(struct pci224_board),
+	.num_names	= ARRAY_SIZE(pci224_boards),
+};
+
+static int __devinit amplc_pci224_pci_probe(struct pci_dev *dev,
+						   const struct pci_device_id
+						   *ent)
+{
+	return comedi_pci_auto_config(dev, &amplc_pci224_driver);
 }
 
+static void __devexit amplc_pci224_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(amplc_pci224_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI224) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_AMPLICON_PCI234) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, amplc_pci224_pci_table);
+
+static struct pci_driver amplc_pci224_pci_driver = {
+	.name		= "amplc_pci224",
+	.id_table	= amplc_pci224_pci_table,
+	.probe		= amplc_pci224_pci_probe,
+	.remove		= __devexit_p(amplc_pci224_pci_remove),
+};
+module_comedi_pci_driver(amplc_pci224_driver, amplc_pci224_pci_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 538979551c8e..d4c80b1281f2 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -500,13 +500,6 @@ static const struct pci230_board pci230_boards[] = {
 	 },
 };
 
-static DEFINE_PCI_DEVICE_TABLE(pci230_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_PCI230) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_PCI260) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, pci230_pci_table);
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -595,65 +588,6 @@ static const struct comedi_lrange pci230_ao_range = { 2, {
 /* PCI230 daccon bipolar flag for each analogue output range. */
 static const unsigned char pci230_ao_bipolar[2] = { 0, 1 };
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pci230_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pci230_detach(struct comedi_device *dev);
-static struct comedi_driver driver_amplc_pci230 = {
-	.driver_name = "amplc_pci230",
-	.module = THIS_MODULE,
-	.attach = pci230_attach,
-	.detach = pci230_detach,
-	.board_name = &pci230_boards[0].name,
-	.offset = sizeof(pci230_boards[0]),
-	.num_names = ARRAY_SIZE(pci230_boards),
-};
-
-static int __devinit driver_amplc_pci230_pci_probe(struct pci_dev *dev,
-						   const struct pci_device_id
-						   *ent)
-{
-	return comedi_pci_auto_config(dev, driver_amplc_pci230.driver_name);
-}
-
-static void __devexit driver_amplc_pci230_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_amplc_pci230_pci_driver = {
-	.id_table = pci230_pci_table,
-	.probe = &driver_amplc_pci230_pci_probe,
-	.remove = __devexit_p(&driver_amplc_pci230_pci_remove)
-};
-
-static int __init driver_amplc_pci230_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_amplc_pci230);
-	if (retval < 0)
-		return retval;
-
-	driver_amplc_pci230_pci_driver.name =
-	    (char *)driver_amplc_pci230.driver_name;
-	return pci_register_driver(&driver_amplc_pci230_pci_driver);
-}
-
-static void __exit driver_amplc_pci230_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_amplc_pci230_pci_driver);
-	comedi_driver_unregister(&driver_amplc_pci230);
-}
-
-module_init(driver_amplc_pci230_init_module);
-module_exit(driver_amplc_pci230_cleanup_module);
-
 static int pci230_ai_rinsn(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_insn *insn,
 			   unsigned int *data);
@@ -1003,35 +937,19 @@ static int pci230_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pci230_detach(struct comedi_device *dev)
+static void pci230_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: amplc_pci230: remove\n", dev->minor);
-
 	if (dev->subdevices && thisboard->have_dio)
-		/* Clean up dio subdevice. */
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (devpriv) {
 		if (devpriv->pci_dev) {
 			if (dev->iobase)
 				comedi_pci_disable(devpriv->pci_dev);
-
 			pci_dev_put(devpriv->pci_dev);
 		}
 	}
-
-	return 0;
 }
 
 static int get_resources(struct comedi_device *dev, unsigned int res_mask,
@@ -3048,6 +2966,42 @@ static int pci230_ai_cancel(struct comedi_device *dev,
 	return 0;
 }
 
+static struct comedi_driver amplc_pci230_driver = {
+	.driver_name	= "amplc_pci230",
+	.module		= THIS_MODULE,
+	.attach		= pci230_attach,
+	.detach		= pci230_detach,
+	.board_name	= &pci230_boards[0].name,
+	.offset		= sizeof(pci230_boards[0]),
+	.num_names	= ARRAY_SIZE(pci230_boards),
+};
+
+static int __devinit amplc_pci230_pci_probe(struct pci_dev *dev,
+					    const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &amplc_pci230_driver);
+}
+
+static void __devexit amplc_pci230_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(amplc_pci230_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_PCI230) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMPLICON, PCI_DEVICE_ID_PCI260) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, amplc_pci230_pci_table);
+
+static struct pci_driver amplc_pci230_pci_driver = {
+	.name		= "amplc_pci230",
+	.id_table	= amplc_pci230_pci_table,
+	.probe		= amplc_pci230_pci_probe,
+	.remove		= __devexit_p(amplc_pci230_pci_remove)
+};
+module_comedi_pci_driver(amplc_pci230_driver, amplc_pci230_pci_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/c6xdigio.c b/drivers/staging/comedi/drivers/c6xdigio.c
index 11cdaf2a5aa5..fb9951a746a6 100644
--- a/drivers/staging/comedi/drivers/c6xdigio.c
+++ b/drivers/staging/comedi/drivers/c6xdigio.c
@@ -97,16 +97,6 @@ union encvaluetype {
 
 #define C6XDIGIO_TIME_OUT 20
 
-static int c6xdigio_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int c6xdigio_detach(struct comedi_device *dev);
-struct comedi_driver driver_c6xdigio = {
-	.driver_name = "c6xdigio",
-	.module = THIS_MODULE,
-	.attach = c6xdigio_attach,
-	.detach = c6xdigio_detach,
-};
-
 static void C6X_pwmInit(unsigned long baseAddr)
 {
 	int timeout = 0;
@@ -407,10 +397,6 @@ static void board_init(struct comedi_device *dev)
 
 }
 
-/* static void board_halt(struct comedi_device *dev) { */
-/* C6X_pwmInit(dev->iobase); */
-/* } */
-
 /*
    options[0] - I/O port
    options[1] - irq
@@ -500,36 +486,22 @@ static int c6xdigio_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int c6xdigio_detach(struct comedi_device *dev)
+static void c6xdigio_detach(struct comedi_device *dev)
 {
-	/* board_halt(dev);  may not need this */
-
-	printk(KERN_DEBUG "comedi%d: c6xdigio: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, C6XDIGIO_SIZE);
-
-	/*  Not using IRQ so I am not sure if I need this */
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	pnp_unregister_driver(&c6xdigio_pnp_driver);
-
-	return 0;
-}
-
-static int __init driver_c6xdigio_init_module(void)
-{
-	return comedi_driver_register(&driver_c6xdigio);
 }
 
-static void __exit driver_c6xdigio_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_c6xdigio);
-}
-
-module_init(driver_c6xdigio_init_module);
-module_exit(driver_c6xdigio_cleanup_module);
+static struct comedi_driver c6xdigio_driver = {
+	.driver_name	= "c6xdigio",
+	.module		= THIS_MODULE,
+	.attach		= c6xdigio_attach,
+	.detach		= c6xdigio_detach,
+};
+module_comedi_driver(c6xdigio_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 49404f49f7b7..35159235a1b6 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -91,7 +91,7 @@ struct das16cs_private {
 
 static int das16cs_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it);
-static int das16cs_detach(struct comedi_device *dev);
+static void das16cs_detach(struct comedi_device *dev);
 static struct comedi_driver driver_das16cs = {
 	.driver_name = "cb_das16_cs",
 	.module = THIS_MODULE,
@@ -255,15 +255,10 @@ static int das16cs_attach(struct comedi_device *dev,
 	return 1;
 }
 
-static int das16cs_detach(struct comedi_device *dev)
+static void das16cs_detach(struct comedi_device *dev)
 {
-	dev_dbg(dev->hw_dev, "comedi%d: das16cs: remove\n", dev->minor);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
-
-	return 0;
 }
 
 static irqreturn_t das16cs_interrupt(int irq, void *d)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 7e4ffcfdac62..ee9e084bb96c 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -405,20 +405,6 @@ static const struct cb_pcidas_board cb_pcidas_boards[] = {
 	 },
 };
 
-static DEFINE_PCI_DEVICE_TABLE(cb_pcidas_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0001) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x000f) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0010) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0019) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x001c) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x004c) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x001a) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x001b) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, cb_pcidas_pci_table);
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -462,22 +448,6 @@ struct cb_pcidas_private {
  */
 #define devpriv ((struct cb_pcidas_private *)dev->private)
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int cb_pcidas_attach(struct comedi_device *dev,
-			    struct comedi_devconfig *it);
-static int cb_pcidas_detach(struct comedi_device *dev);
-static struct comedi_driver driver_cb_pcidas = {
-	.driver_name = "cb_pcidas",
-	.module = THIS_MODULE,
-	.attach = cb_pcidas_attach,
-	.detach = cb_pcidas_detach,
-};
-
 static int cb_pcidas_ai_rinsn(struct comedi_device *dev,
 			      struct comedi_subdevice *s,
 			      struct comedi_insn *insn, unsigned int *data);
@@ -756,26 +726,12 @@ found:
 	return 1;
 }
 
-/*
- * cb_pcidas_detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int cb_pcidas_detach(struct comedi_device *dev)
+static void cb_pcidas_detach(struct comedi_device *dev)
 {
-
 	if (devpriv) {
 		if (devpriv->s5933_config) {
-			/*  disable and clear interrupts on amcc s5933 */
 			outl(INTCSR_INBOX_INTR_STATUS,
 			     devpriv->s5933_config + AMCC_OP_REG_INTCSR);
-#ifdef CB_PCIDAS_DEBUG
-			dev_dbg(dev->hw_dev, "detaching, incsr is 0x%x\n",
-				inl(devpriv->s5933_config + AMCC_OP_REG_INTCSR));
-#endif
 		}
 	}
 	if (dev->irq)
@@ -787,8 +743,6 @@ static int cb_pcidas_detach(struct comedi_device *dev)
 			comedi_pci_disable(devpriv->pci_dev);
 		pci_dev_put(devpriv->pci_dev);
 	}
-
-	return 0;
 }
 
 /*
@@ -1918,47 +1872,44 @@ static int nvram_read(struct comedi_device *dev, unsigned int address,
 	return 0;
 }
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __devinit driver_cb_pcidas_pci_probe(struct pci_dev *dev,
-						const struct pci_device_id *ent)
+static struct comedi_driver cb_pcidas_driver = {
+	.driver_name	= "cb_pcidas",
+	.module		= THIS_MODULE,
+	.attach		= cb_pcidas_attach,
+	.detach		= cb_pcidas_detach,
+};
+
+static int __devinit cb_pcidas_pci_probe(struct pci_dev *dev,
+					 const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_cb_pcidas.driver_name);
+	return comedi_pci_auto_config(dev, &cb_pcidas_driver);
 }
 
-static void __devexit driver_cb_pcidas_pci_remove(struct pci_dev *dev)
+static void __devexit cb_pcidas_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_cb_pcidas_pci_driver = {
-	.id_table = cb_pcidas_pci_table,
-	.probe = &driver_cb_pcidas_pci_probe,
-	.remove = __devexit_p(&driver_cb_pcidas_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(cb_pcidas_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0001) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x000f) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0010) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0019) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x001c) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x004c) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x001a) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x001b) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, cb_pcidas_pci_table);
 
-static int __init driver_cb_pcidas_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_cb_pcidas);
-	if (retval < 0)
-		return retval;
-
-	driver_cb_pcidas_pci_driver.name = (char *)driver_cb_pcidas.driver_name;
-	return pci_register_driver(&driver_cb_pcidas_pci_driver);
-}
-
-static void __exit driver_cb_pcidas_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_cb_pcidas_pci_driver);
-	comedi_driver_unregister(&driver_cb_pcidas);
-}
-
-module_init(driver_cb_pcidas_init_module);
-module_exit(driver_cb_pcidas_cleanup_module);
+static struct pci_driver cb_pcidas_pci_driver = {
+	.name		= "cb_pcidas",
+	.id_table	= cb_pcidas_pci_table,
+	.probe		= cb_pcidas_pci_probe,
+	.remove		= __devexit_p(cb_pcidas_pci_remove)
+};
+module_comedi_pci_driver(cb_pcidas_driver, cb_pcidas_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 915157d47805..9d0b8754ff5b 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1026,31 +1026,6 @@ static const struct pcidas64_board pcidas64_boards[] = {
 #endif
 };
 
-static DEFINE_PCI_DEVICE_TABLE(pcidas64_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x001d) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x001e) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0035) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0036) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0037) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0052) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x005d) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x005e) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x005f) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0061) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0062) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0063) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0064) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0066) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0067) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0068) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x006f) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0078) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0079) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pcidas64_pci_table);
-
 static inline struct pcidas64_board *board(const struct comedi_device *dev)
 {
 	return (struct pcidas64_board *)dev->board_ptr;
@@ -1127,21 +1102,6 @@ static inline struct pcidas64_private *priv(struct comedi_device *dev)
 	return dev->private;
 }
 
-/*
- * The comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int detach(struct comedi_device *dev);
-static struct comedi_driver driver_cb_pcidas = {
-	.driver_name = "cb_pcidas64",
-	.module = THIS_MODULE,
-	.attach = attach,
-	.detach = detach,
-};
-
 static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 		    struct comedi_insn *insn, unsigned int *data);
 static int ai_config_insn(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -1216,44 +1176,6 @@ static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags);
 static void load_ao_dma(struct comedi_device *dev,
 			const struct comedi_cmd *cmd);
 
-static int __devinit driver_cb_pcidas_pci_probe(struct pci_dev *dev,
-						const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, driver_cb_pcidas.driver_name);
-}
-
-static void __devexit driver_cb_pcidas_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_cb_pcidas_pci_driver = {
-	.id_table = pcidas64_pci_table,
-	.probe = &driver_cb_pcidas_pci_probe,
-	.remove = __devexit_p(&driver_cb_pcidas_pci_remove)
-};
-
-static int __init driver_cb_pcidas_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_cb_pcidas);
-	if (retval < 0)
-		return retval;
-
-	driver_cb_pcidas_pci_driver.name = (char *)driver_cb_pcidas.driver_name;
-	return pci_register_driver(&driver_cb_pcidas_pci_driver);
-}
-
-static void __exit driver_cb_pcidas_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_cb_pcidas_pci_driver);
-	comedi_driver_unregister(&driver_cb_pcidas);
-}
-
-module_init(driver_cb_pcidas_init_module);
-module_exit(driver_cb_pcidas_cleanup_module);
-
 static unsigned int ai_range_bits_6xxx(const struct comedi_device *dev,
 				       unsigned int range_index)
 {
@@ -1781,7 +1703,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev_dbg(dev->hw_dev, "Found %s on bus %i, slot %i\n", board(dev)->name,
 		pcidev->bus->number, PCI_SLOT(pcidev->devfn));
 
-	if (comedi_pci_enable(pcidev, driver_cb_pcidas.driver_name)) {
+	if (comedi_pci_enable(pcidev, dev->driver->driver_name)) {
 		dev_warn(dev->hw_dev, "failed to enable PCI device and request regions\n");
 		return -EIO;
 	}
@@ -1868,15 +1790,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int detach(struct comedi_device *dev)
+static void detach(struct comedi_device *dev)
 {
 	unsigned int i;
 
@@ -1938,8 +1852,6 @@ static int detach(struct comedi_device *dev)
 	}
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 4);
-
-	return 0;
 }
 
 static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -4315,6 +4227,56 @@ static void i2c_write(struct comedi_device *dev, unsigned int address,
 	i2c_stop(dev);
 }
 
+static struct comedi_driver cb_pcidas64_driver = {
+	.driver_name	= "cb_pcidas64",
+	.module		= THIS_MODULE,
+	.attach		= attach,
+	.detach		= detach,
+};
+
+static int __devinit cb_pcidas64_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &cb_pcidas64_driver);
+}
+
+static void __devexit cb_pcidas64_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(cb_pcidas64_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x001d) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x001e) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0035) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0036) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0037) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0052) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x005d) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x005e) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x005f) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0061) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0062) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0063) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0064) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0066) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0067) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0068) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x006f) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0078) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0079) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, cb_pcidas64_pci_table);
+
+static struct pci_driver cb_pcidas64_pci_driver = {
+	.name		= "cb_pcidas64",
+	.id_table	= cb_pcidas64_pci_table,
+	.probe		= cb_pcidas64_pci_probe,
+	.remove		= __devexit_p(cb_pcidas64_pci_remove),
+};
+module_comedi_pci_driver(cb_pcidas64_driver, cb_pcidas64_pci_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index abba220a767f..25ebca11eadc 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -51,9 +51,12 @@ Please report success/failure with other different cards to
 #include "comedi_pci.h"
 #include "8255.h"
 
-#define PCI_VENDOR_ID_CB	0x1307	/*  PCI vendor number of ComputerBoards */
+
+/* PCI vendor number of ComputerBoards */
+#define PCI_VENDOR_ID_CB        0x1307
 #define EEPROM_SIZE	128	/*  number of entries in eeprom */
-#define MAX_AO_CHANNELS 8	/*  maximum number of ao channels for supported boards */
+/* maximum number of ao channels for supported boards */
+#define MAX_AO_CHANNELS 8
 
 /* PCI-DDA base addresses */
 #define DIGITALIO_BADRINDEX	2
@@ -94,20 +97,26 @@ Please report success/failure with other different cards to
 
 #define DACALIBRATION1	4	/*  D/A CALIBRATION REGISTER 1 */
 /* write bits */
-#define	SERIAL_IN_BIT	0x1	/*  serial data input for eeprom, caldacs, reference dac */
+/* serial data input for eeprom, caldacs, reference dac */
+#define SERIAL_IN_BIT   0x1
 #define	CAL_CHANNEL_MASK	(0x7 << 1)
 #define	CAL_CHANNEL_BITS(channel)	(((channel) << 1) & CAL_CHANNEL_MASK)
 /* read bits */
 #define	CAL_COUNTER_MASK	0x1f
-#define	CAL_COUNTER_OVERFLOW_BIT	0x20	/*  calibration counter overflow status bit */
-#define	AO_BELOW_REF_BIT	0x40	/*  analog output is less than reference dac voltage */
+/* calibration counter overflow status bit */
+#define CAL_COUNTER_OVERFLOW_BIT        0x20
+/* analog output is less than reference dac voltage */
+#define AO_BELOW_REF_BIT        0x40
 #define	SERIAL_OUT_BIT	0x80	/*  serial data out, for reading from eeprom */
 
 #define DACALIBRATION2	6	/*  D/A CALIBRATION REGISTER 2 */
 #define	SELECT_EEPROM_BIT	0x1	/*  send serial data in to eeprom */
-#define	DESELECT_REF_DAC_BIT	0x2	/*  don't send serial data to MAX542 reference dac */
-#define	DESELECT_CALDAC_BIT(n)	(0x4 << (n))	/*  don't send serial data to caldac n */
-#define	DUMMY_BIT	0x40	/*  manual says to set this bit with no explanation */
+/* don't send serial data to MAX542 reference dac */
+#define DESELECT_REF_DAC_BIT    0x2
+/* don't send serial data to caldac n */
+#define DESELECT_CALDAC_BIT(n)  (0x4 << (n))
+/* manual says to set this bit with no explanation */
+#define DUMMY_BIT       0x40
 
 #define DADATA	8		/*  FIRST D/A DATA REGISTER (0) */
 
@@ -195,26 +204,17 @@ static const struct cb_pcidda_board cb_pcidda_boards[] = {
 	 },
 };
 
-static DEFINE_PCI_DEVICE_TABLE(cb_pcidda_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0020) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0021) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0022) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0023) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0024) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0025) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, cb_pcidda_pci_table);
-
 /*
  * Useful for shorthand access to the particular board structure
  */
 #define thisboard ((const struct cb_pcidda_board *)dev->board_ptr)
 
-/* this structure is for data unique to this hardware driver.  If
-   several hardware drivers keep similar information in this structure,
-   feel free to suggest moving the variable to the struct comedi_device struct.  */
+/*
+ * this structure is for data unique to this hardware driver.  If
+ * several hardware drivers keep similar information in this structure,
+ * feel free to suggest moving the variable to the struct comedi_device
+ * struct.
+ */
 struct cb_pcidda_private {
 	int data;
 
@@ -227,8 +227,10 @@ struct cb_pcidda_private {
 	/* unsigned long control_status; */
 	/* unsigned long adc_fifo; */
 
-	unsigned int dac_cal1_bits;	/*  bits last written to da calibration register 1 */
-	unsigned int ao_range[MAX_AO_CHANNELS];	/*  current range settings for output channels */
+	/* bits last written to da calibration register 1 */
+	unsigned int dac_cal1_bits;
+	/* current range settings for output channels */
+	unsigned int ao_range[MAX_AO_CHANNELS];
 	u16 eeprom_data[EEPROM_SIZE];	/*  software copy of board's eeprom */
 };
 
@@ -238,9 +240,6 @@ struct cb_pcidda_private {
  */
 #define devpriv ((struct cb_pcidda_private *)dev->private)
 
-static int cb_pcidda_attach(struct comedi_device *dev,
-			    struct comedi_devconfig *it);
-static int cb_pcidda_detach(struct comedi_device *dev);
 /* static int cb_pcidda_ai_rinsn(struct comedi_device *dev,struct comedi_subdevice *s,struct comedi_insn *insn,unsigned int *data); */
 static int cb_pcidda_ao_winsn(struct comedi_device *dev,
 			      struct comedi_subdevice *s,
@@ -259,19 +258,6 @@ static void cb_pcidda_calibrate(struct comedi_device *dev, unsigned int channel,
 				unsigned int range);
 
 /*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static struct comedi_driver driver_cb_pcidda = {
-	.driver_name = "cb_pcidda",
-	.module = THIS_MODULE,
-	.attach = cb_pcidda_attach,
-	.detach = cb_pcidda_detach,
-};
-
-/*
  * Attach is called by the Comedi core to configure the driver
  * for a particular board.
  */
@@ -377,7 +363,8 @@ found:
 	dev_dbg(dev->hw_dev, "eeprom:\n");
 	for (index = 0; index < EEPROM_SIZE; index++) {
 		devpriv->eeprom_data[index] = cb_pcidda_read_eeprom(dev, index);
-		dev_dbg(dev->hw_dev, "%i:0x%x\n", index, devpriv->eeprom_data[index]);
+		dev_dbg(dev->hw_dev, "%i:0x%x\n", index,
+			devpriv->eeprom_data[index]);
 	}
 
 	/*  set calibrations dacs */
@@ -387,19 +374,8 @@ found:
 	return 1;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int cb_pcidda_detach(struct comedi_device *dev)
+static void cb_pcidda_detach(struct comedi_device *dev)
 {
-/*
- * Deallocate the I/O ports.
- */
 	if (devpriv) {
 		if (devpriv->pci_dev) {
 			if (devpriv->dac)
@@ -407,13 +383,10 @@ static int cb_pcidda_detach(struct comedi_device *dev)
 			pci_dev_put(devpriv->pci_dev);
 		}
 	}
-	/*  cleanup 8255 */
 	if (dev->subdevices) {
 		subdev_8255_cleanup(dev, dev->subdevices + 1);
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
 	}
-
-	return 0;
 }
 
 /*
@@ -484,7 +457,10 @@ static int cb_pcidda_ai_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 1;
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/*
+	 * step 2: make sure trigger sources are unique and mutually
+	 * compatible
+	 */
 
 	/* note that mutual compatibility is not an issue here */
 	if (cmd->scan_begin_src != TRIG_TIMER
@@ -696,8 +672,10 @@ static unsigned int cb_pcidda_read_eeprom(struct comedi_device *dev,
 	unsigned int i;
 	unsigned int cal2_bits;
 	unsigned int value;
-	const int max_num_caldacs = 4;	/*  one caldac for every two dac channels */
-	const int read_instruction = 0x6;	/*  bits to send to tell eeprom we want to read */
+	/* one caldac for every two dac channels */
+	const int max_num_caldacs = 4;
+	/* bits to send to tell eeprom we want to read */
+	const int read_instruction = 0x6;
 	const int instruction_length = 3;
 	const int address_length = 8;
 
@@ -729,9 +707,11 @@ static void cb_pcidda_write_caldac(struct comedi_device *dev,
 {
 	unsigned int cal2_bits;
 	unsigned int i;
-	const int num_channel_bits = 3;	/*  caldacs use 3 bit channel specification */
+	/* caldacs use 3 bit channel specification */
+	const int num_channel_bits = 3;
 	const int num_caldac_bits = 8;	/*  8 bit calibration dacs */
-	const int max_num_caldacs = 4;	/*  one caldac for every two dac channels */
+	/* one caldac for every two dac channels */
+	const int max_num_caldacs = 4;
 
 	/* write 3 bit channel */
 	cb_pcidda_serial_out(dev, channel, num_channel_bits);
@@ -790,14 +770,20 @@ static unsigned int offset_eeprom_address(unsigned int ao_channel,
 	return 0x7 + 2 * range + 12 * ao_channel;
 }
 
-/* returns eeprom address that provides gain calibration for given ao channel and range */
+/*
+ * returns eeprom address that provides gain calibration for given ao
+ * channel and range
+ */
 static unsigned int gain_eeprom_address(unsigned int ao_channel,
 					unsigned int range)
 {
 	return 0x8 + 2 * range + 12 * ao_channel;
 }
 
-/* returns upper byte of eeprom entry, which gives the coarse adjustment values */
+/*
+ * returns upper byte of eeprom entry, which gives the coarse adjustment
+ * values
+ */
 static unsigned int eeprom_coarse_byte(unsigned int word)
 {
 	return (word >> 8) & 0xff;
@@ -815,7 +801,7 @@ static void cb_pcidda_calibrate(struct comedi_device *dev, unsigned int channel,
 {
 	unsigned int coarse_offset, fine_offset, coarse_gain, fine_gain;
 
-	/*  remember range so we can tell when we need to readjust calibration */
+	/* remember range so we can tell when we need to readjust calibration */
 	devpriv->ao_range[channel] = range;
 
 	/*  get values from eeprom data */
@@ -843,47 +829,42 @@ static void cb_pcidda_calibrate(struct comedi_device *dev, unsigned int channel,
 			       fine_gain_channel(channel), fine_gain);
 }
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __devinit driver_cb_pcidda_pci_probe(struct pci_dev *dev,
-						const struct pci_device_id *ent)
+static struct comedi_driver cb_pcidda_driver = {
+	.driver_name	= "cb_pcidda",
+	.module		= THIS_MODULE,
+	.attach		= cb_pcidda_attach,
+	.detach		= cb_pcidda_detach,
+};
+
+static int __devinit cb_pcidda_pci_probe(struct pci_dev *dev,
+					 const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_cb_pcidda.driver_name);
+	return comedi_pci_auto_config(dev, &cb_pcidda_driver);
 }
 
-static void __devexit driver_cb_pcidda_pci_remove(struct pci_dev *dev)
+static void __devexit cb_pcidda_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_cb_pcidda_pci_driver = {
-	.id_table = cb_pcidda_pci_table,
-	.probe = &driver_cb_pcidda_pci_probe,
-	.remove = __devexit_p(&driver_cb_pcidda_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(cb_pcidda_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0020) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0021) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0022) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0023) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0024) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0025) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, cb_pcidda_pci_table);
 
-static int __init driver_cb_pcidda_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_cb_pcidda);
-	if (retval < 0)
-		return retval;
-
-	driver_cb_pcidda_pci_driver.name = (char *)driver_cb_pcidda.driver_name;
-	return pci_register_driver(&driver_cb_pcidda_pci_driver);
-}
-
-static void __exit driver_cb_pcidda_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_cb_pcidda_pci_driver);
-	comedi_driver_unregister(&driver_cb_pcidda);
-}
-
-module_init(driver_cb_pcidda_init_module);
-module_exit(driver_cb_pcidda_cleanup_module);
+static struct pci_driver cb_pcidda_pci_driver = {
+	.name		= "cb_pcidda",
+	.id_table	= cb_pcidda_pci_table,
+	.probe		= cb_pcidda_pci_probe,
+	.remove		= __devexit_p(cb_pcidda_pci_remove),
+};
+module_comedi_pci_driver(cb_pcidda_driver, cb_pcidda_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/cb_pcidio.c b/drivers/staging/comedi/drivers/cb_pcidio.c
index 8f3215239a15..713132c8dbb5 100644
--- a/drivers/staging/comedi/drivers/cb_pcidio.c
+++ b/drivers/staging/comedi/drivers/cb_pcidio.c
@@ -86,19 +86,6 @@ static const struct pcidio_board pcidio_boards[] = {
 	 },
 };
 
-/* This is used by modprobe to translate PCI IDs to drivers.  Should
- * only be used for PCI and ISA-PnP devices */
-/* Please add your PCI vendor ID to comedidev.h, and it will be forwarded
- * upstream. */
-static DEFINE_PCI_DEVICE_TABLE(pcidio_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0028) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0014) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x000b) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, pcidio_pci_table);
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -125,59 +112,6 @@ struct pcidio_private {
  */
 #define devpriv ((struct pcidio_private *)dev->private)
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pcidio_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcidio_detach(struct comedi_device *dev);
-static struct comedi_driver driver_cb_pcidio = {
-	.driver_name = "cb_pcidio",
-	.module = THIS_MODULE,
-	.attach = pcidio_attach,
-	.detach = pcidio_detach,
-
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
-
-	/* Most drivers will support multiple types of boards by
-	 * having an array of board structures.  These were defined
-	 * in pcidio_boards[] above.  Note that the element 'name'
-	 * was first in the structure -- Comedi uses this fact to
-	 * extract the name of the board without knowing any details
-	 * about the structure except for its length.
-	 * When a device is attached (by comedi_config), the name
-	 * of the device is given to Comedi, and Comedi tries to
-	 * match it by going through the list of board names.  If
-	 * there is a match, the address of the pointer is put
-	 * into dev->board_ptr and driver->attach() is called.
-	 *
-	 * Note that these are not necessary if you can determine
-	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
-	 * devices are such boards.
-	 */
-
-/* The following fields should NOT be initialized if you are dealing
- * with PCI devices
- *
- *	.board_name = pcidio_boards,
- *	.offset = sizeof(struct pcidio_board),
- *	.num_names = sizeof(pcidio_boards) / sizeof(structpcidio_board),
- */
-
-};
-
-/*------------------------------- FUNCTIONS -----------------------------------*/
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
 static int pcidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pci_dev *pcidev = NULL;
@@ -261,15 +195,7 @@ found:
 	return 1;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pcidio_detach(struct comedi_device *dev)
+static void pcidio_detach(struct comedi_device *dev)
 {
 	if (devpriv) {
 		if (devpriv->pci_dev) {
@@ -283,50 +209,41 @@ static int pcidio_detach(struct comedi_device *dev)
 		for (i = 0; i < thisboard->n_8255; i++)
 			subdev_8255_cleanup(dev, dev->subdevices + i);
 	}
-	return 0;
 }
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __devinit driver_cb_pcidio_pci_probe(struct pci_dev *dev,
+static struct comedi_driver cb_pcidio_driver = {
+	.driver_name	= "cb_pcidio",
+	.module		= THIS_MODULE,
+	.attach		= pcidio_attach,
+	.detach		= pcidio_detach,
+};
+
+static int __devinit cb_pcidio_pci_probe(struct pci_dev *dev,
 						const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_cb_pcidio.driver_name);
+	return comedi_pci_auto_config(dev, &cb_pcidio_driver);
 }
 
-static void __devexit driver_cb_pcidio_pci_remove(struct pci_dev *dev)
+static void __devexit cb_pcidio_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_cb_pcidio_pci_driver = {
-	.id_table = pcidio_pci_table,
-	.probe = &driver_cb_pcidio_pci_probe,
-	.remove = __devexit_p(&driver_cb_pcidio_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(cb_pcidio_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0028) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x0014) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_CB, 0x000b) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, cb_pcidio_pci_table);
 
-static int __init driver_cb_pcidio_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_cb_pcidio);
-	if (retval < 0)
-		return retval;
-
-	driver_cb_pcidio_pci_driver.name = (char *)driver_cb_pcidio.driver_name;
-	return pci_register_driver(&driver_cb_pcidio_pci_driver);
-}
-
-static void __exit driver_cb_pcidio_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_cb_pcidio_pci_driver);
-	comedi_driver_unregister(&driver_cb_pcidio);
-}
-
-module_init(driver_cb_pcidio_init_module);
-module_exit(driver_cb_pcidio_cleanup_module);
+static struct pci_driver cb_pcidio_pci_driver = {
+	.name		= "cb_pcidio",
+	.id_table	= cb_pcidio_pci_table,
+	.probe		= cb_pcidio_pci_probe,
+	.remove		= __devexit_p(cb_pcidio_pci_remove),
+};
+module_comedi_pci_driver(cb_pcidio_driver, cb_pcidio_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index 8ba694263bd3..5f834d02ec24 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -123,15 +123,6 @@ static const struct cb_pcimdas_board cb_pcimdas_boards[] = {
 	 },
 };
 
-/* This is used by modprobe to translate PCI IDs to drivers.  Should
- * only be used for PCI and ISA-PnP devices */
-static DEFINE_PCI_DEVICE_TABLE(cb_pcimdas_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0056) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table);
-
 #define N_BOARDS 1		/*  Max number of boards supported */
 
 /*
@@ -139,9 +130,12 @@ MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table);
  */
 #define thisboard ((const struct cb_pcimdas_board *)dev->board_ptr)
 
-/* this structure is for data unique to this hardware driver.  If
-   several hardware drivers keep similar information in this structure,
-   feel free to suggest moving the variable to the struct comedi_device struct.  */
+/*
+ * this structure is for data unique to this hardware driver.  If
+ * several hardware drivers keep similar information in this structure,
+ * feel free to suggest moving the variable to the struct comedi_device
+ * struct.
+ */
 struct cb_pcimdas_private {
 	int data;
 
@@ -172,22 +166,6 @@ struct cb_pcimdas_private {
  */
 #define devpriv ((struct cb_pcimdas_private *)dev->private)
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int cb_pcimdas_attach(struct comedi_device *dev,
-			     struct comedi_devconfig *it);
-static int cb_pcimdas_detach(struct comedi_device *dev);
-static struct comedi_driver driver_cb_pcimdas = {
-	.driver_name = "cb_pcimdas",
-	.module = THIS_MODULE,
-	.attach = cb_pcimdas_attach,
-	.detach = cb_pcimdas_detach,
-};
-
 static int cb_pcimdas_ai_rinsn(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data);
@@ -317,7 +295,8 @@ found:
 	s->subdev_flags = SDF_WRITABLE;
 	s->n_chan = thisboard->ao_nchan;
 	s->maxdata = 1 << thisboard->ao_bits;
-	s->range_table = &range_unknown;	/* ranges are hardware settable, but not software readable. */
+	/* ranges are hardware settable, but not software readable. */
+	s->range_table = &range_unknown;
 	s->insn_write = &cb_pcimdas_ao_winsn;
 	s->insn_read = &cb_pcimdas_ao_rinsn;
 
@@ -331,29 +310,8 @@ found:
 	return 1;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int cb_pcimdas_detach(struct comedi_device *dev)
+static void cb_pcimdas_detach(struct comedi_device *dev)
 {
-	if (devpriv) {
-		dev_dbg(dev->hw_dev, "devpriv->BADR0 = 0x%lx\n",
-			devpriv->BADR0);
-		dev_dbg(dev->hw_dev, "devpriv->BADR1 = 0x%lx\n",
-			devpriv->BADR1);
-		dev_dbg(dev->hw_dev, "devpriv->BADR2 = 0x%lx\n",
-			devpriv->BADR2);
-		dev_dbg(dev->hw_dev, "devpriv->BADR3 = 0x%lx\n",
-			devpriv->BADR3);
-		dev_dbg(dev->hw_dev, "devpriv->BADR4 = 0x%lx\n",
-			devpriv->BADR4);
-	}
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if (devpriv) {
@@ -363,8 +321,6 @@ static int cb_pcimdas_detach(struct comedi_device *dev)
 			pci_dev_put(devpriv->pci_dev);
 		}
 	}
-
-	return 0;
 }
 
 /*
@@ -402,7 +358,10 @@ static int cb_pcimdas_ai_rinsn(struct comedi_device *dev,
 	outb(0x01, devpriv->BADR3 + 6);	/* set bursting off, conversions on */
 	outb(0x00, devpriv->BADR3 + 7);	/* set range to 10V. UP/BP is controlled by a switch on the board */
 
-	/*  write channel limits to multiplexer, set Low (bits 0-3) and High (bits 4-7) channels to chan. */
+	/*
+	 * write channel limits to multiplexer, set Low (bits 0-3) and
+	 * High (bits 4-7) channels to chan.
+	 */
 	chanlims = chan | (chan << 4);
 	outb(chanlims, devpriv->BADR3 + 0);
 
@@ -479,49 +438,37 @@ static int cb_pcimdas_ao_rinsn(struct comedi_device *dev,
 	return i;
 }
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __devinit driver_cb_pcimdas_pci_probe(struct pci_dev *dev,
-						 const struct pci_device_id
-						 *ent)
+static struct comedi_driver cb_pcimdas_driver = {
+	.driver_name	= "cb_pcimdas",
+	.module		= THIS_MODULE,
+	.attach		= cb_pcimdas_attach,
+	.detach		= cb_pcimdas_detach,
+};
+
+static int __devinit cb_pcimdas_pci_probe(struct pci_dev *dev,
+					  const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_cb_pcimdas.driver_name);
+	return comedi_pci_auto_config(dev, &cb_pcimdas_driver);
 }
 
-static void __devexit driver_cb_pcimdas_pci_remove(struct pci_dev *dev)
+static void __devexit cb_pcimdas_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_cb_pcimdas_pci_driver = {
-	.id_table = cb_pcimdas_pci_table,
-	.probe = &driver_cb_pcimdas_pci_probe,
-	.remove = __devexit_p(&driver_cb_pcimdas_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(cb_pcimdas_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, 0x0056) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table);
 
-static int __init driver_cb_pcimdas_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_cb_pcimdas);
-	if (retval < 0)
-		return retval;
-
-	driver_cb_pcimdas_pci_driver.name =
-	    (char *)driver_cb_pcimdas.driver_name;
-	return pci_register_driver(&driver_cb_pcimdas_pci_driver);
-}
-
-static void __exit driver_cb_pcimdas_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_cb_pcimdas_pci_driver);
-	comedi_driver_unregister(&driver_cb_pcimdas);
-}
-
-module_init(driver_cb_pcimdas_init_module);
-module_exit(driver_cb_pcimdas_cleanup_module);
+static struct pci_driver cb_pcimdas_pci_driver = {
+	.name		= "cb_pcimdas",
+	.id_table	= cb_pcimdas_pci_table,
+	.probe		= cb_pcimdas_pci_probe,
+	.remove		= __devexit_p(cb_pcimdas_pci_remove),
+};
+module_comedi_pci_driver(cb_pcimdas_driver, cb_pcimdas_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c
index 40bddfa22220..b339685e234d 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdda.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdda.c
@@ -140,17 +140,6 @@ static const struct board_struct boards[] = {
 #define REG_SZ (thisboard->reg_sz)
 #define REGS_BADRINDEX (thisboard->regs_badrindex)
 
-/* This is used by modprobe to translate PCI IDs to drivers.  Should
- * only be used for PCI and ISA-PnP devices */
-/* Please add your PCI vendor ID to comedidev.h, and it will be forwarded
- * upstream. */
-static DEFINE_PCI_DEVICE_TABLE(pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, PCI_ID_PCIM_DDA06_16) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, pci_table);
-
 /*
  * this structure is for data unique to this hardware driver.  If
  * several hardware drivers keep similar information in this structure,
@@ -161,7 +150,6 @@ struct board_private_struct {
 	unsigned long registers;	/* set by probe */
 	unsigned long dio_registers;
 	char attached_to_8255;	/* boolean */
-	char attached_successfully;	/* boolean */
 	/* would be useful for a PCI device */
 	struct pci_dev *pci_dev;
 
@@ -177,66 +165,6 @@ struct board_private_struct {
  */
 #define devpriv ((struct board_private_struct *)dev->private)
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int detach(struct comedi_device *dev);
-static struct comedi_driver cb_pcimdda_driver = {
-	.driver_name = "cb_pcimdda",
-	.module = THIS_MODULE,
-	.attach = attach,
-	.detach = detach,
-};
-
-MODULE_AUTHOR("Calin A. Culianu <calin@rtlab.org>");
-MODULE_DESCRIPTION("Comedi low-level driver for the Computerboards PCIM-DDA "
-		   "series.  Currently only supports PCIM-DDA06-16 (which "
-		   "also happens to be the only board in this series. :) ) ");
-MODULE_LICENSE("GPL");
-static int __devinit cb_pcimdda_driver_pci_probe(struct pci_dev *dev,
-						 const struct pci_device_id
-						 *ent)
-{
-	return comedi_pci_auto_config(dev, cb_pcimdda_driver.driver_name);
-}
-
-static void __devexit cb_pcimdda_driver_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver cb_pcimdda_driver_pci_driver = {
-	.id_table = pci_table,
-	.probe = &cb_pcimdda_driver_pci_probe,
-	.remove = __devexit_p(&cb_pcimdda_driver_pci_remove)
-};
-
-static int __init cb_pcimdda_driver_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&cb_pcimdda_driver);
-	if (retval < 0)
-		return retval;
-
-	cb_pcimdda_driver_pci_driver.name =
-	    (char *)cb_pcimdda_driver.driver_name;
-	return pci_register_driver(&cb_pcimdda_driver_pci_driver);
-}
-
-static void __exit cb_pcimdda_driver_cleanup_module(void)
-{
-	pci_unregister_driver(&cb_pcimdda_driver_pci_driver);
-	comedi_driver_unregister(&cb_pcimdda_driver);
-}
-
-module_init(cb_pcimdda_driver_init_module);
-module_exit(cb_pcimdda_driver_cleanup_module);
-
 static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
 		    struct comedi_insn *insn, unsigned int *data);
 static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -354,44 +282,24 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		s->type = COMEDI_SUBD_UNUSED;
 	}
 
-	devpriv->attached_successfully = 1;
-
 	printk("attached\n");
 
 	return 1;
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int detach(struct comedi_device *dev)
+static void detach(struct comedi_device *dev)
 {
 	if (devpriv) {
-
 		if (dev->subdevices && devpriv->attached_to_8255) {
-			/* de-register us from the 8255 driver */
 			subdev_8255_cleanup(dev, dev->subdevices + 2);
 			devpriv->attached_to_8255 = 0;
 		}
-
 		if (devpriv->pci_dev) {
 			if (devpriv->registers)
 				comedi_pci_disable(devpriv->pci_dev);
 			pci_dev_put(devpriv->pci_dev);
 		}
-
-		if (devpriv->attached_successfully && thisboard)
-			printk("comedi%d: %s: detached\n", dev->minor,
-			       thisboard->name);
-
 	}
-
-	return 0;
 }
 
 static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -515,3 +423,41 @@ static int probe(struct comedi_device *dev, const struct comedi_devconfig *it)
 	       "card found at the requested position\n");
 	return -ENODEV;
 }
+
+static struct comedi_driver cb_pcimdda_driver = {
+	.driver_name	= "cb_pcimdda",
+	.module		= THIS_MODULE,
+	.attach		= attach,
+	.detach		= detach,
+};
+
+static int __devinit cb_pcimdda_pci_probe(struct pci_dev *dev,
+					  const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &cb_pcimdda_driver);
+}
+
+static void __devexit cb_pcimdda_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(cb_pcimdda_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, PCI_ID_PCIM_DDA06_16) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, cb_pcimdda_pci_table);
+
+static struct pci_driver cb_pcimdda_driver_pci_driver = {
+	.name		= "cb_pcimdda",
+	.id_table	= cb_pcimdda_pci_table,
+	.probe		= cb_pcimdda_pci_probe,
+	.remove		= __devexit_p(cb_pcimdda_pci_remove),
+};
+module_comedi_pci_driver(cb_pcimdda_driver, cb_pcimdda_driver_pci_driver);
+
+MODULE_AUTHOR("Calin A. Culianu <calin@rtlab.org>");
+MODULE_DESCRIPTION("Comedi low-level driver for the Computerboards PCIM-DDA "
+		   "series.  Currently only supports PCIM-DDA06-16 (which "
+		   "also happens to be the only board in this series. :) ) ");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/comedi_bond.c b/drivers/staging/comedi/drivers/comedi_bond.c
index d8aefb23d6b9..29412de06c31 100644
--- a/drivers/staging/comedi/drivers/comedi_bond.c
+++ b/drivers/staging/comedi/drivers/comedi_bond.c
@@ -60,7 +60,6 @@ Configuration Options:
 #define MAX_CHANS 256
 
 #define MODULE_NAME "comedi_bond"
-MODULE_LICENSE("GPL");
 #ifndef STR
 #  define STR1(x) #x
 #  define STR(x) STR1(x)
@@ -79,10 +78,6 @@ MODULE_PARM_DESC(debug, "If true, print extra cryptic debugging output useful"
 	} while (0)
 #define WARNING(x...)  printk(KERN_WARNING MODULE_NAME ": WARNING: "x)
 #define ERROR(x...)  printk(KERN_ERR MODULE_NAME ": INTERNAL ERROR: "x)
-MODULE_AUTHOR("Calin A. Culianu");
-MODULE_DESCRIPTION(MODULE_NAME "A driver for COMEDI to bond multiple COMEDI "
-		   "devices together as one.  In the words of John Lennon: "
-		   "'And the world will live as one...'");
 
 /*
  * Board descriptions for two imaginary boards.  Describing the
@@ -93,12 +88,6 @@ struct BondingBoard {
 	const char *name;
 };
 
-static const struct BondingBoard bondingBoards[] = {
-	{
-	 .name = MODULE_NAME,
-	 },
-};
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -133,129 +122,6 @@ struct Private {
  */
 #define devpriv ((struct Private *)dev->private)
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int bonding_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int bonding_detach(struct comedi_device *dev);
-/** Build Private array of all devices.. */
-static int doDevConfig(struct comedi_device *dev, struct comedi_devconfig *it);
-static void doDevUnconfig(struct comedi_device *dev);
-/* Ugly implementation of realloc that always copies memory around -- I'm lazy,
- * what can I say?  I like to do wasteful memcopies.. :) */
-static void *Realloc(const void *ptr, size_t len, size_t old_len);
-
-static struct comedi_driver driver_bonding = {
-	.driver_name = MODULE_NAME,
-	.module = THIS_MODULE,
-	.attach = bonding_attach,
-	.detach = bonding_detach,
-	/* It is not necessary to implement the following members if you are
-	 * writing a driver for a ISA PnP or PCI card */
-	/* Most drivers will support multiple types of boards by
-	 * having an array of board structures.  These were defined
-	 * in skel_boards[] above.  Note that the element 'name'
-	 * was first in the structure -- Comedi uses this fact to
-	 * extract the name of the board without knowing any details
-	 * about the structure except for its length.
-	 * When a device is attached (by comedi_config), the name
-	 * of the device is given to Comedi, and Comedi tries to
-	 * match it by going through the list of board names.  If
-	 * there is a match, the address of the pointer is put
-	 * into dev->board_ptr and driver->attach() is called.
-	 *
-	 * Note that these are not necessary if you can determine
-	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
-	 * devices are such boards.
-	 */
-	.board_name = &bondingBoards[0].name,
-	.offset = sizeof(struct BondingBoard),
-	.num_names = ARRAY_SIZE(bondingBoards),
-};
-
-static int bonding_dio_insn_bits(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data);
-static int bonding_dio_insn_config(struct comedi_device *dev,
-				   struct comedi_subdevice *s,
-				   struct comedi_insn *insn,
-				   unsigned int *data);
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int bonding_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-
-	LOG_MSG("comedi%d\n", dev->minor);
-
-	/*
-	 * Allocate the private structure area.  alloc_private() is a
-	 * convenient macro defined in comedidev.h.
-	 */
-	if (alloc_private(dev, sizeof(struct Private)) < 0)
-		return -ENOMEM;
-
-	/*
-	 * Setup our bonding from config params.. sets up our Private struct..
-	 */
-	if (!doDevConfig(dev, it))
-		return -EINVAL;
-
-	/*
-	 * Initialize dev->board_name.  Note that we can use the "thisboard"
-	 * macro now, since we just initialized it in the last line.
-	 */
-	dev->board_name = devpriv->name;
-
-	/*
-	 * Allocate the subdevice structures.  alloc_subdevice() is a
-	 * convenient macro defined in comedidev.h.
-	 */
-	if (alloc_subdevices(dev, 1) < 0)
-		return -ENOMEM;
-
-	s = dev->subdevices + 0;
-	s->type = COMEDI_SUBD_DIO;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-	s->n_chan = devpriv->nchans;
-	s->maxdata = 1;
-	s->range_table = &range_digital;
-	s->insn_bits = bonding_dio_insn_bits;
-	s->insn_config = bonding_dio_insn_config;
-
-	LOG_MSG("attached with %u DIO channels coming from %u different "
-		"subdevices all bonded together.  "
-		"John Lennon would be proud!\n",
-		devpriv->nchans, devpriv->ndevs);
-
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int bonding_detach(struct comedi_device *dev)
-{
-	LOG_MSG("comedi%d: remove\n", dev->minor);
-	doDevUnconfig(dev);
-	return 0;
-}
-
 /* DIO devices are slightly special.  Although it is possible to
  * implement the insn_read/insn_write interface, it is much more
  * useful to applications if you implement the insn_bits interface.
@@ -466,7 +332,57 @@ static int doDevConfig(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }
 
-static void doDevUnconfig(struct comedi_device *dev)
+static int bonding_attach(struct comedi_device *dev,
+			  struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+
+	LOG_MSG("comedi%d\n", dev->minor);
+
+	/*
+	 * Allocate the private structure area.  alloc_private() is a
+	 * convenient macro defined in comedidev.h.
+	 */
+	if (alloc_private(dev, sizeof(struct Private)) < 0)
+		return -ENOMEM;
+
+	/*
+	 * Setup our bonding from config params.. sets up our Private struct..
+	 */
+	if (!doDevConfig(dev, it))
+		return -EINVAL;
+
+	/*
+	 * Initialize dev->board_name.  Note that we can use the "thisboard"
+	 * macro now, since we just initialized it in the last line.
+	 */
+	dev->board_name = devpriv->name;
+
+	/*
+	 * Allocate the subdevice structures.  alloc_subdevice() is a
+	 * convenient macro defined in comedidev.h.
+	 */
+	if (alloc_subdevices(dev, 1) < 0)
+		return -ENOMEM;
+
+	s = dev->subdevices + 0;
+	s->type = COMEDI_SUBD_DIO;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+	s->n_chan = devpriv->nchans;
+	s->maxdata = 1;
+	s->range_table = &range_digital;
+	s->insn_bits = bonding_dio_insn_bits;
+	s->insn_config = bonding_dio_insn_config;
+
+	LOG_MSG("attached with %u DIO channels coming from %u different "
+		"subdevices all bonded together.  "
+		"John Lennon would be proud!\n",
+		devpriv->nchans, devpriv->ndevs);
+
+	return 1;
+}
+
+static void bonding_detach(struct comedi_device *dev)
 {
 	unsigned long devs_closed = 0;
 
@@ -490,15 +406,25 @@ static void doDevUnconfig(struct comedi_device *dev)
 	}
 }
 
-static int __init init(void)
-{
-	return comedi_driver_register(&driver_bonding);
-}
+static const struct BondingBoard bondingBoards[] = {
+	{
+		.name		= "comedi_bond",
+	},
+};
 
-static void __exit cleanup(void)
-{
-	comedi_driver_unregister(&driver_bonding);
-}
+static struct comedi_driver bonding_driver = {
+	.driver_name	= "comedi_bond",
+	.module		= THIS_MODULE,
+	.attach		= bonding_attach,
+	.detach		= bonding_detach,
+	.board_name	= &bondingBoards[0].name,
+	.offset		= sizeof(struct BondingBoard),
+	.num_names	= ARRAY_SIZE(bondingBoards),
+};
+module_comedi_driver(bonding_driver);
 
-module_init(init);
-module_exit(cleanup);
+MODULE_AUTHOR("Calin A. Culianu");
+MODULE_DESCRIPTION(MODULE_NAME "A driver for COMEDI to bond multiple COMEDI "
+		   "devices together as one.  In the words of John Lennon: "
+		   "'And the world will live as one...'");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/comedi_parport.c b/drivers/staging/comedi/drivers/comedi_parport.c
index 21d834dd92b6..bff5dcd76107 100644
--- a/drivers/staging/comedi/drivers/comedi_parport.c
+++ b/drivers/staging/comedi/drivers/comedi_parport.c
@@ -91,29 +91,6 @@ pin, which can be used to wake up tasks.
 #define PARPORT_B 1
 #define PARPORT_C 2
 
-static int parport_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int parport_detach(struct comedi_device *dev);
-static struct comedi_driver driver_parport = {
-	.driver_name = "comedi_parport",
-	.module = THIS_MODULE,
-	.attach = parport_attach,
-	.detach = parport_detach,
-};
-
-static int __init driver_parport_init_module(void)
-{
-	return comedi_driver_register(&driver_parport);
-}
-
-static void __exit driver_parport_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_parport);
-}
-
-module_init(driver_parport_init_module);
-module_exit(driver_parport_cleanup_module);
-
 struct parport_private {
 	unsigned int a_data;
 	unsigned int c_data;
@@ -395,19 +372,22 @@ static int parport_attach(struct comedi_device *dev,
 	return 1;
 }
 
-static int parport_detach(struct comedi_device *dev)
+static void parport_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: parport: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, PARPORT_SIZE);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
-	return 0;
 }
 
+static struct comedi_driver parport_driver = {
+	.driver_name	= "comedi_parport",
+	.module		= THIS_MODULE,
+	.attach		= parport_attach,
+	.detach		= parport_detach,
+};
+module_comedi_driver(parport_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c
index a804742b8022..873e37450bba 100644
--- a/drivers/staging/comedi/drivers/comedi_test.c
+++ b/drivers/staging/comedi/drivers/comedi_test.c
@@ -67,15 +67,6 @@ struct waveform_board {
 
 #define N_CHANS 8
 
-static const struct waveform_board waveform_boards[] = {
-	{
-	 .name = "comedi_test",
-	 .ai_chans = N_CHANS,
-	 .ai_bits = 16,
-	 .have_dio = 0,
-	 },
-};
-
 #define thisboard ((const struct waveform_board *)dev->board_ptr)
 
 /* Data unique to this driver */
@@ -94,54 +85,6 @@ struct waveform_private {
 };
 #define devpriv ((struct waveform_private *)dev->private)
 
-static int waveform_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int waveform_detach(struct comedi_device *dev);
-static struct comedi_driver driver_waveform = {
-	.driver_name = "comedi_test",
-	.module = THIS_MODULE,
-	.attach = waveform_attach,
-	.detach = waveform_detach,
-	.board_name = &waveform_boards[0].name,
-	.offset = sizeof(struct waveform_board),
-	.num_names = ARRAY_SIZE(waveform_boards),
-};
-
-static int __init driver_waveform_init_module(void)
-{
-	return comedi_driver_register(&driver_waveform);
-}
-
-static void __exit driver_waveform_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_waveform);
-}
-
-module_init(driver_waveform_init_module);
-module_exit(driver_waveform_cleanup_module);
-
-static int waveform_ai_cmdtest(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_cmd *cmd);
-static int waveform_ai_cmd(struct comedi_device *dev,
-			   struct comedi_subdevice *s);
-static int waveform_ai_cancel(struct comedi_device *dev,
-			      struct comedi_subdevice *s);
-static int waveform_ai_insn_read(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data);
-static int waveform_ao_insn_write(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data);
-static short fake_sawtooth(struct comedi_device *dev, unsigned int range,
-			   unsigned long current_time);
-static short fake_squarewave(struct comedi_device *dev, unsigned int range,
-			     unsigned long current_time);
-static short fake_flatline(struct comedi_device *dev, unsigned int range,
-			   unsigned long current_time);
-static short fake_waveform(struct comedi_device *dev, unsigned int channel,
-			   unsigned int range, unsigned long current_time);
-
 /* 1000 nanosec in a microsec */
 static const int nano_per_micro = 1000;
 
@@ -154,6 +97,78 @@ static const struct comedi_lrange waveform_ai_ranges = {
 	 }
 };
 
+static short fake_sawtooth(struct comedi_device *dev, unsigned int range_index,
+			   unsigned long current_time)
+{
+	struct comedi_subdevice *s = dev->read_subdev;
+	unsigned int offset = s->maxdata / 2;
+	u64 value;
+	const struct comedi_krange *krange =
+	    &s->range_table->range[range_index];
+	u64 binary_amplitude;
+
+	binary_amplitude = s->maxdata;
+	binary_amplitude *= devpriv->uvolt_amplitude;
+	do_div(binary_amplitude, krange->max - krange->min);
+
+	current_time %= devpriv->usec_period;
+	value = current_time;
+	value *= binary_amplitude * 2;
+	do_div(value, devpriv->usec_period);
+	value -= binary_amplitude;	/* get rid of sawtooth's dc offset */
+
+	return offset + value;
+}
+
+static short fake_squarewave(struct comedi_device *dev,
+			     unsigned int range_index,
+			     unsigned long current_time)
+{
+	struct comedi_subdevice *s = dev->read_subdev;
+	unsigned int offset = s->maxdata / 2;
+	u64 value;
+	const struct comedi_krange *krange =
+	    &s->range_table->range[range_index];
+	current_time %= devpriv->usec_period;
+
+	value = s->maxdata;
+	value *= devpriv->uvolt_amplitude;
+	do_div(value, krange->max - krange->min);
+
+	if (current_time < devpriv->usec_period / 2)
+		value *= -1;
+
+	return offset + value;
+}
+
+static short fake_flatline(struct comedi_device *dev, unsigned int range_index,
+			   unsigned long current_time)
+{
+	return dev->read_subdev->maxdata / 2;
+}
+
+/* generates a different waveform depending on what channel is read */
+static short fake_waveform(struct comedi_device *dev, unsigned int channel,
+			   unsigned int range, unsigned long current_time)
+{
+	enum {
+		SAWTOOTH_CHAN,
+		SQUARE_CHAN,
+	};
+	switch (channel) {
+	case SAWTOOTH_CHAN:
+		return fake_sawtooth(dev, range, current_time);
+		break;
+	case SQUARE_CHAN:
+		return fake_squarewave(dev, range, current_time);
+		break;
+	default:
+		break;
+	}
+
+	return fake_flatline(dev, range, current_time);
+}
+
 /*
    This is the background routine used to generate arbitrary data.
    It should run in the background; therefore it is scheduled by
@@ -217,84 +232,6 @@ static void waveform_ai_interrupt(unsigned long arg)
 	comedi_event(dev, dev->read_subdev);
 }
 
-static int waveform_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int amplitude = it->options[0];
-	int period = it->options[1];
-	int i;
-
-	dev->board_name = thisboard->name;
-
-	if (alloc_private(dev, sizeof(struct waveform_private)) < 0)
-		return -ENOMEM;
-
-	/* set default amplitude and period */
-	if (amplitude <= 0)
-		amplitude = 1000000;	/* 1 volt */
-	if (period <= 0)
-		period = 100000;	/* 0.1 sec */
-
-	devpriv->uvolt_amplitude = amplitude;
-	devpriv->usec_period = period;
-
-	dev->n_subdevices = 2;
-	if (alloc_subdevices(dev, dev->n_subdevices) < 0)
-		return -ENOMEM;
-
-	s = dev->subdevices + 0;
-	dev->read_subdev = s;
-	/* analog input subdevice */
-	s->type = COMEDI_SUBD_AI;
-	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ;
-	s->n_chan = thisboard->ai_chans;
-	s->maxdata = (1 << thisboard->ai_bits) - 1;
-	s->range_table = &waveform_ai_ranges;
-	s->len_chanlist = s->n_chan * 2;
-	s->insn_read = waveform_ai_insn_read;
-	s->do_cmd = waveform_ai_cmd;
-	s->do_cmdtest = waveform_ai_cmdtest;
-	s->cancel = waveform_ai_cancel;
-
-	s = dev->subdevices + 1;
-	dev->write_subdev = s;
-	/* analog output subdevice (loopback) */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
-	s->n_chan = thisboard->ai_chans;
-	s->maxdata = (1 << thisboard->ai_bits) - 1;
-	s->range_table = &waveform_ai_ranges;
-	s->len_chanlist = s->n_chan * 2;
-	s->insn_write = waveform_ao_insn_write;
-	s->do_cmd = NULL;
-	s->do_cmdtest = NULL;
-	s->cancel = NULL;
-
-	/* Our default loopback value is just a 0V flatline */
-	for (i = 0; i < s->n_chan; i++)
-		devpriv->ao_loopbacks[i] = s->maxdata / 2;
-
-	init_timer(&(devpriv->timer));
-	devpriv->timer.function = waveform_ai_interrupt;
-	devpriv->timer.data = (unsigned long)dev;
-
-	printk(KERN_INFO "comedi%d: comedi_test: "
-	       "%i microvolt, %li microsecond waveform attached\n", dev->minor,
-	       devpriv->uvolt_amplitude, devpriv->usec_period);
-	return 1;
-}
-
-static int waveform_detach(struct comedi_device *dev)
-{
-	printk("comedi%d: comedi_test: remove\n", dev->minor);
-
-	if (dev->private)
-		waveform_ai_cancel(dev, dev->read_subdev);
-
-	return 0;
-}
-
 static int waveform_ai_cmdtest(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_cmd *cmd)
@@ -465,78 +402,6 @@ static int waveform_ai_cancel(struct comedi_device *dev,
 	return 0;
 }
 
-static short fake_sawtooth(struct comedi_device *dev, unsigned int range_index,
-			   unsigned long current_time)
-{
-	struct comedi_subdevice *s = dev->read_subdev;
-	unsigned int offset = s->maxdata / 2;
-	u64 value;
-	const struct comedi_krange *krange =
-	    &s->range_table->range[range_index];
-	u64 binary_amplitude;
-
-	binary_amplitude = s->maxdata;
-	binary_amplitude *= devpriv->uvolt_amplitude;
-	do_div(binary_amplitude, krange->max - krange->min);
-
-	current_time %= devpriv->usec_period;
-	value = current_time;
-	value *= binary_amplitude * 2;
-	do_div(value, devpriv->usec_period);
-	value -= binary_amplitude;	/* get rid of sawtooth's dc offset */
-
-	return offset + value;
-}
-
-static short fake_squarewave(struct comedi_device *dev,
-			     unsigned int range_index,
-			     unsigned long current_time)
-{
-	struct comedi_subdevice *s = dev->read_subdev;
-	unsigned int offset = s->maxdata / 2;
-	u64 value;
-	const struct comedi_krange *krange =
-	    &s->range_table->range[range_index];
-	current_time %= devpriv->usec_period;
-
-	value = s->maxdata;
-	value *= devpriv->uvolt_amplitude;
-	do_div(value, krange->max - krange->min);
-
-	if (current_time < devpriv->usec_period / 2)
-		value *= -1;
-
-	return offset + value;
-}
-
-static short fake_flatline(struct comedi_device *dev, unsigned int range_index,
-			   unsigned long current_time)
-{
-	return dev->read_subdev->maxdata / 2;
-}
-
-/* generates a different waveform depending on what channel is read */
-static short fake_waveform(struct comedi_device *dev, unsigned int channel,
-			   unsigned int range, unsigned long current_time)
-{
-	enum {
-		SAWTOOTH_CHAN,
-		SQUARE_CHAN,
-	};
-	switch (channel) {
-	case SAWTOOTH_CHAN:
-		return fake_sawtooth(dev, range, current_time);
-		break;
-	case SQUARE_CHAN:
-		return fake_squarewave(dev, range, current_time);
-		break;
-	default:
-		break;
-	}
-
-	return fake_flatline(dev, range, current_time);
-}
-
 static int waveform_ai_insn_read(struct comedi_device *dev,
 				 struct comedi_subdevice *s,
 				 struct comedi_insn *insn, unsigned int *data)
@@ -561,6 +426,100 @@ static int waveform_ao_insn_write(struct comedi_device *dev,
 	return insn->n;
 }
 
+static int waveform_attach(struct comedi_device *dev,
+			   struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int amplitude = it->options[0];
+	int period = it->options[1];
+	int i;
+
+	dev->board_name = thisboard->name;
+
+	if (alloc_private(dev, sizeof(struct waveform_private)) < 0)
+		return -ENOMEM;
+
+	/* set default amplitude and period */
+	if (amplitude <= 0)
+		amplitude = 1000000;	/* 1 volt */
+	if (period <= 0)
+		period = 100000;	/* 0.1 sec */
+
+	devpriv->uvolt_amplitude = amplitude;
+	devpriv->usec_period = period;
+
+	dev->n_subdevices = 2;
+	if (alloc_subdevices(dev, dev->n_subdevices) < 0)
+		return -ENOMEM;
+
+	s = dev->subdevices + 0;
+	dev->read_subdev = s;
+	/* analog input subdevice */
+	s->type = COMEDI_SUBD_AI;
+	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ;
+	s->n_chan = thisboard->ai_chans;
+	s->maxdata = (1 << thisboard->ai_bits) - 1;
+	s->range_table = &waveform_ai_ranges;
+	s->len_chanlist = s->n_chan * 2;
+	s->insn_read = waveform_ai_insn_read;
+	s->do_cmd = waveform_ai_cmd;
+	s->do_cmdtest = waveform_ai_cmdtest;
+	s->cancel = waveform_ai_cancel;
+
+	s = dev->subdevices + 1;
+	dev->write_subdev = s;
+	/* analog output subdevice (loopback) */
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
+	s->n_chan = thisboard->ai_chans;
+	s->maxdata = (1 << thisboard->ai_bits) - 1;
+	s->range_table = &waveform_ai_ranges;
+	s->len_chanlist = s->n_chan * 2;
+	s->insn_write = waveform_ao_insn_write;
+	s->do_cmd = NULL;
+	s->do_cmdtest = NULL;
+	s->cancel = NULL;
+
+	/* Our default loopback value is just a 0V flatline */
+	for (i = 0; i < s->n_chan; i++)
+		devpriv->ao_loopbacks[i] = s->maxdata / 2;
+
+	init_timer(&(devpriv->timer));
+	devpriv->timer.function = waveform_ai_interrupt;
+	devpriv->timer.data = (unsigned long)dev;
+
+	printk(KERN_INFO "comedi%d: comedi_test: "
+	       "%i microvolt, %li microsecond waveform attached\n", dev->minor,
+	       devpriv->uvolt_amplitude, devpriv->usec_period);
+	return 1;
+}
+
+static void waveform_detach(struct comedi_device *dev)
+{
+	if (dev->private)
+		waveform_ai_cancel(dev, dev->read_subdev);
+}
+
+static const struct waveform_board waveform_boards[] = {
+	{
+		.name		= "comedi_test",
+		.ai_chans	= N_CHANS,
+		.ai_bits	= 16,
+		.have_dio	= 0,
+	},
+};
+
+static struct comedi_driver waveform_driver = {
+	.driver_name	= "comedi_test",
+	.module		= THIS_MODULE,
+	.attach		= waveform_attach,
+	.detach		= waveform_detach,
+	.board_name	= &waveform_boards[0].name,
+	.offset		= sizeof(struct waveform_board),
+	.num_names	= ARRAY_SIZE(waveform_boards),
+};
+module_comedi_driver(waveform_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/contec_pci_dio.c b/drivers/staging/comedi/drivers/contec_pci_dio.c
index e3659bd6e85e..b8bac80f2baf 100644
--- a/drivers/staging/comedi/drivers/contec_pci_dio.c
+++ b/drivers/staging/comedi/drivers/contec_pci_dio.c
@@ -56,13 +56,6 @@ static const struct contec_board contec_boards[] = {
 };
 
 #define PCI_DEVICE_ID_PIO1616L 0x8172
-static DEFINE_PCI_DEVICE_TABLE(contec_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_CONTEC, PCI_DEVICE_ID_PIO1616L),
-		.driver_data = PIO1616L },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, contec_pci_table);
 
 #define thisboard ((const struct contec_board *)dev->board_ptr)
 
@@ -75,30 +68,42 @@ struct contec_private {
 
 #define devpriv ((struct contec_private *)dev->private)
 
-static int contec_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int contec_detach(struct comedi_device *dev);
-static struct comedi_driver driver_contec = {
-	.driver_name = "contec_pci_dio",
-	.module = THIS_MODULE,
-	.attach = contec_attach,
-	.detach = contec_detach,
-};
+static int contec_do_insn_bits(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn, unsigned int *data)
+{
+
+	dev_dbg(dev->hw_dev, "contec_do_insn_bits called\n");
+	dev_dbg(dev->hw_dev, "data: %d %d\n", data[0], data[1]);
+
+	if (insn->n != 2)
+		return -EINVAL;
+
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= data[0] & data[1];
+		dev_dbg(dev->hw_dev, "out: %d on %lx\n", s->state,
+			dev->iobase + thisboard->out_offs);
+		outw(s->state, dev->iobase + thisboard->out_offs);
+	}
+	return 2;
+}
 
-/* Classic digital IO */
 static int contec_di_insn_bits(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int contec_do_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
+			       struct comedi_insn *insn, unsigned int *data)
+{
+
+	dev_dbg(dev->hw_dev, "contec_di_insn_bits called\n");
+	dev_dbg(dev->hw_dev, "data: %d %d\n", data[0], data[1]);
 
-#if 0
-static int contec_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_cmd *cmd);
+	if (insn->n != 2)
+		return -EINVAL;
 
-static int contec_ns_to_timer(unsigned int *ns, int round);
-#endif
+	data[1] = inw(dev->iobase + thisboard->in_offs);
+
+	return 2;
+}
 
 static int contec_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
@@ -164,107 +169,47 @@ static int contec_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return -EIO;
 }
 
-static int contec_detach(struct comedi_device *dev)
+static void contec_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: contec: remove\n", dev->minor);
-
 	if (devpriv && devpriv->pci_dev) {
 		if (dev->iobase)
 			comedi_pci_disable(devpriv->pci_dev);
 		pci_dev_put(devpriv->pci_dev);
 	}
-
-	return 0;
-}
-
-#if 0
-static int contec_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_cmd *cmd)
-{
-	printk("contec_cmdtest called\n");
-	return 0;
-}
-
-static int contec_ns_to_timer(unsigned int *ns, int round)
-{
-	return *ns;
-}
-#endif
-
-static int contec_do_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-
-	dev_dbg(dev->hw_dev, "contec_do_insn_bits called\n");
-	dev_dbg(dev->hw_dev, "data: %d %d\n", data[0], data[1]);
-
-	if (insn->n != 2)
-		return -EINVAL;
-
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= data[0] & data[1];
-		dev_dbg(dev->hw_dev, "out: %d on %lx\n", s->state,
-			dev->iobase + thisboard->out_offs);
-		outw(s->state, dev->iobase + thisboard->out_offs);
-	}
-	return 2;
 }
 
-static int contec_di_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-
-	dev_dbg(dev->hw_dev, "contec_di_insn_bits called\n");
-	dev_dbg(dev->hw_dev, "data: %d %d\n", data[0], data[1]);
-
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = inw(dev->iobase + thisboard->in_offs);
-
-	return 2;
-}
+static struct comedi_driver contec_pci_dio_driver = {
+	.driver_name	= "contec_pci_dio",
+	.module		= THIS_MODULE,
+	.attach		= contec_attach,
+	.detach		= contec_detach,
+};
 
-static int __devinit driver_contec_pci_probe(struct pci_dev *dev,
-					     const struct pci_device_id *ent)
+static int __devinit contec_pci_dio_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_contec.driver_name);
+	return comedi_pci_auto_config(dev, &contec_pci_dio_driver);
 }
 
-static void __devexit driver_contec_pci_remove(struct pci_dev *dev)
+static void __devexit contec_pci_dio_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_contec_pci_driver = {
-	.id_table = contec_pci_table,
-	.probe = &driver_contec_pci_probe,
-	.remove = __devexit_p(&driver_contec_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(contec_pci_dio_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_CONTEC, PCI_DEVICE_ID_PIO1616L),
+		.driver_data = PIO1616L },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, contec_pci_dio_pci_table);
 
-static int __init driver_contec_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_contec);
-	if (retval < 0)
-		return retval;
-
-	driver_contec_pci_driver.name = (char *)driver_contec.driver_name;
-	return pci_register_driver(&driver_contec_pci_driver);
-}
-
-static void __exit driver_contec_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_contec_pci_driver);
-	comedi_driver_unregister(&driver_contec);
-}
-
-module_init(driver_contec_init_module);
-module_exit(driver_contec_cleanup_module);
+static struct pci_driver contec_pci_dio_pci_driver = {
+	.name		= "contec_pci_dio",
+	.id_table	= contec_pci_dio_pci_table,
+	.probe		= contec_pci_dio_pci_probe,
+	.remove		= __devexit_p(contec_pci_dio_pci_remove),
+};
+module_comedi_pci_driver(contec_pci_dio_driver, contec_pci_dio_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index e61c6a8f2857..696b58ca2e59 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -301,17 +301,6 @@ struct daqboard2000_hw {
 #define DAQBOARD2000_PosRefDacSelect             0x0100
 #define DAQBOARD2000_NegRefDacSelect             0x0000
 
-static int daqboard2000_attach(struct comedi_device *dev,
-			       struct comedi_devconfig *it);
-static int daqboard2000_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_daqboard2000 = {
-	.driver_name = "daqboard2000",
-	.module = THIS_MODULE,
-	.attach = daqboard2000_attach,
-	.detach = daqboard2000_detach,
-};
-
 struct daq200_boardtype {
 	const char *name;
 	int id;
@@ -321,16 +310,8 @@ static const struct daq200_boardtype boardtypes[] = {
 	{"ids4", DAQBOARD2000_SUBSYSTEM_IDS4},
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct daq200_boardtype))
 #define this_board ((const struct daq200_boardtype *)dev->board_ptr)
 
-static DEFINE_PCI_DEVICE_TABLE(daqboard2000_pci_table) = {
-	{ PCI_DEVICE(0x1616, 0x0409) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, daqboard2000_pci_table);
-
 struct daqboard2000_private {
 	enum {
 		card_daqboard_2000
@@ -412,9 +393,12 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
 	    DAQBOARD2000_AcqResetScanListFifo |
 	    DAQBOARD2000_AcqResetResultsFifo | DAQBOARD2000_AcqResetConfigPipe;
 
-	/* If pacer clock is not set to some high value (> 10 us), we
-	   risk multiple samples to be put into the result FIFO. */
-	fpga->acqPacerClockDivLow = 1000000;	/* 1 second, should be long enough */
+	/*
+	 * If pacer clock is not set to some high value (> 10 us), we
+	 * risk multiple samples to be put into the result FIFO.
+	 */
+	/* 1 second, should be long enough */
+	fpga->acqPacerClockDivLow = 1000000;
 	fpga->acqPacerClockDivHigh = 0;
 
 	gain = CR_RANGE(insn->chanspec);
@@ -761,7 +745,7 @@ static int daqboard2000_attach(struct comedi_device *dev,
 		devpriv->pci_dev = card;
 		id = ((u32) card->
 		      subsystem_device << 16) | card->subsystem_vendor;
-		for (i = 0; i < n_boardtypes; i++) {
+		for (i = 0; i < ARRAY_SIZE(boardtypes); i++) {
 			if (boardtypes[i].id == id) {
 				dev_dbg(dev->hw_dev, "%s\n",
 					boardtypes[i].name);
@@ -852,14 +836,12 @@ out:
 	return result;
 }
 
-static int daqboard2000_detach(struct comedi_device *dev)
+static void daqboard2000_detach(struct comedi_device *dev)
 {
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (devpriv) {
 		if (devpriv->daq)
 			iounmap(devpriv->daq);
@@ -871,48 +853,39 @@ static int daqboard2000_detach(struct comedi_device *dev)
 			pci_dev_put(devpriv->pci_dev);
 		}
 	}
-	return 0;
 }
 
-static int __devinit driver_daqboard2000_pci_probe(struct pci_dev *dev,
-						   const struct pci_device_id
-						   *ent)
+static struct comedi_driver daqboard2000_driver = {
+	.driver_name	= "daqboard2000",
+	.module		= THIS_MODULE,
+	.attach		= daqboard2000_attach,
+	.detach		= daqboard2000_detach,
+};
+
+static int __devinit daqboard2000_pci_probe(struct pci_dev *dev,
+					    const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_daqboard2000.driver_name);
+	return comedi_pci_auto_config(dev, &daqboard2000_driver);
 }
 
-static void __devexit driver_daqboard2000_pci_remove(struct pci_dev *dev)
+static void __devexit daqboard2000_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_daqboard2000_pci_driver = {
-	.id_table = daqboard2000_pci_table,
-	.probe = &driver_daqboard2000_pci_probe,
-	.remove = __devexit_p(&driver_daqboard2000_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(daqboard2000_pci_table) = {
+	{ PCI_DEVICE(0x1616, 0x0409) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, daqboard2000_pci_table);
 
-static int __init driver_daqboard2000_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_daqboard2000);
-	if (retval < 0)
-		return retval;
-
-	driver_daqboard2000_pci_driver.name =
-	    (char *)driver_daqboard2000.driver_name;
-	return pci_register_driver(&driver_daqboard2000_pci_driver);
-}
-
-static void __exit driver_daqboard2000_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_daqboard2000_pci_driver);
-	comedi_driver_unregister(&driver_daqboard2000);
-}
-
-module_init(driver_daqboard2000_init_module);
-module_exit(driver_daqboard2000_cleanup_module);
+static struct pci_driver daqboard2000_pci_driver = {
+	.name		= "daqboard2000",
+	.id_table	= daqboard2000_pci_table,
+	.probe		= daqboard2000_pci_probe,
+	.remove		= __devexit_p(daqboard2000_pci_remove),
+};
+module_comedi_pci_driver(daqboard2000_driver, daqboard2000_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index c2dd0ed36a73..1f319435e23f 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -61,6 +61,20 @@
 
 #define DRV_NAME "das08"
 
+#ifdef CONFIG_COMEDI_DAS08_ISA_MODULE
+#define CONFIG_COMEDI_DAS08_ISA
+#endif
+#ifdef CONFIG_COMEDI_DAS08_PCI_MODULE
+#define CONFIG_COMEDI_DAS08_PCI
+#endif
+#ifdef CONFIG_COMEDI_DAS08_CS_MODULE
+#define CONFIG_COMEDI_DAS08_CS
+#endif
+
+#if defined(CONFIG_COMEDI_DAS08_ISA) || defined(CONFIG_COMEDI_DAS08_PCI)
+#define DO_COMEDI_DRIVER_REGISTER
+#endif
+
 #define PCI_VENDOR_ID_COMPUTERBOARDS 0x1307
 #define PCI_DEVICE_ID_PCIDAS08 0x29
 #define PCIDAS08_SIZE 0x54
@@ -160,6 +174,7 @@ static int das08_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data);
 static int das08_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data);
+#ifdef CONFIG_COMEDI_DAS08_ISA
 static int das08jr_di_rbits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data);
@@ -172,6 +187,7 @@ static int das08jr_ao_winsn(struct comedi_device *dev,
 static int das08ao_ao_winsn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data);
+#endif
 static void i8254_set_mode_low(unsigned int base, int channel,
 			       unsigned int mode);
 
@@ -253,7 +269,9 @@ static const int *const das08_gainlists[] = {
 	das08_pgm_gainlist,
 };
 
+#ifdef DO_COMEDI_DRIVER_REGISTER
 static const struct das08_board_struct das08_boards[] = {
+#ifdef CONFIG_COMEDI_DAS08_ISA
 	{
 	 .name = "isa-das08",	/*  cio-das08.pdf */
 	 .bustype = isa,
@@ -395,25 +413,6 @@ static const struct das08_board_struct das08_boards[] = {
 	 .i8254_offset = 0x04,
 	 .iosize = 16,		/*  unchecked */
 	 },
-#ifdef CONFIG_COMEDI_PCI
-	{
-	 .name = "das08",	/*  pci-das08 */
-	 .id = PCI_DEVICE_ID_PCIDAS08,
-	 .bustype = pci,
-	 .ai = das08_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_pg = das08_bipolar5,
-	 .ai_encoding = das08_encode12,
-	 .ao = NULL,
-	 .ao_nbits = 0,
-	 .di = das08_di_rbits,
-	 .do_ = das08_do_wbits,
-	 .do_nchan = 4,
-	 .i8255_offset = 0,
-	 .i8254_offset = 4,
-	 .iosize = 8,
-	 },
-#endif
 	{
 	 .name = "pc104-das08",
 	 .bustype = pc104,
@@ -462,9 +461,30 @@ static const struct das08_board_struct das08_boards[] = {
 	 .name = "das08-pga-g2",	/*  a KM board */
 	 },
 #endif
+#endif /* CONFIG_COMEDI_DAS08_ISA */
+#ifdef CONFIG_COMEDI_DAS08_PCI
+	{
+	 .name = "das08",	/*  pci-das08 */
+	 .id = PCI_DEVICE_ID_PCIDAS08,
+	 .bustype = pci,
+	 .ai = das08_ai_rinsn,
+	 .ai_nbits = 12,
+	 .ai_pg = das08_bipolar5,
+	 .ai_encoding = das08_encode12,
+	 .ao = NULL,
+	 .ao_nbits = 0,
+	 .di = das08_di_rbits,
+	 .do_ = das08_do_wbits,
+	 .do_nchan = 4,
+	 .i8255_offset = 0,
+	 .i8254_offset = 4,
+	 .iosize = 8,
+	 },
+#endif /* CONFIG_COMEDI_DAS08_PCI */
 };
+#endif /* DO_COMEDI_DRIVER_REGISTER */
 
-#ifdef CONFIG_COMEDI_PCMCIA
+#ifdef CONFIG_COMEDI_DAS08_CS
 struct das08_board_struct das08_cs_boards[NUM_DAS08_CS_BOARDS] = {
 	{
 	 .name = "pcm-das08",
@@ -504,7 +524,7 @@ struct das08_board_struct das08_cs_boards[NUM_DAS08_CS_BOARDS] = {
 };
 #endif
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_DAS08_PCI
 static DEFINE_PCI_DEVICE_TABLE(das08_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTERBOARDS, PCI_DEVICE_ID_PCIDAS08) },
 	{0}
@@ -619,6 +639,7 @@ static int das08_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
 	return 2;
 }
 
+#ifdef CONFIG_COMEDI_DAS08_ISA
 static int das08jr_di_rbits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -628,7 +649,9 @@ static int das08jr_di_rbits(struct comedi_device *dev,
 
 	return 2;
 }
+#endif
 
+#ifdef CONFIG_COMEDI_DAS08_ISA
 static int das08jr_do_wbits(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -643,7 +666,9 @@ static int das08jr_do_wbits(struct comedi_device *dev,
 
 	return 2;
 }
+#endif
 
+#ifdef CONFIG_COMEDI_DAS08_ISA
 static int das08jr_ao_winsn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -672,6 +697,7 @@ static int das08jr_ao_winsn(struct comedi_device *dev,
 
 	return n;
 }
+#endif
 
 /*
  *
@@ -679,6 +705,7 @@ static int das08jr_ao_winsn(struct comedi_device *dev,
  * a different method to force an update.
  *
  */
+#ifdef CONFIG_COMEDI_DAS08_ISA
 static int das08ao_ao_winsn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data)
@@ -707,6 +734,7 @@ static int das08ao_ao_winsn(struct comedi_device *dev,
 
 	return n;
 }
+#endif
 
 static unsigned int i8254_read_channel_low(unsigned int base, int chan)
 {
@@ -842,6 +870,7 @@ static int das08_counter_config(struct comedi_device *dev,
 	return 2;
 }
 
+#ifdef DO_COMEDI_DRIVER_REGISTER
 static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 
 static struct comedi_driver driver_das08 = {
@@ -853,6 +882,7 @@ static struct comedi_driver driver_das08 = {
 	.num_names = sizeof(das08_boards) / sizeof(struct das08_board_struct),
 	.offset = sizeof(struct das08_board_struct),
 };
+#endif
 
 int das08_common_attach(struct comedi_device *dev, unsigned long iobase)
 {
@@ -972,11 +1002,12 @@ int das08_common_attach(struct comedi_device *dev, unsigned long iobase)
 }
 EXPORT_SYMBOL_GPL(das08_common_attach);
 
+#ifdef DO_COMEDI_DRIVER_REGISTER
 static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
 	unsigned long iobase;
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_DAS08_PCI
 	unsigned long pci_iobase = 0;
 	struct pci_dev *pdev = NULL;
 #endif
@@ -986,9 +1017,9 @@ static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		return ret;
 
 	printk(KERN_INFO "comedi%d: das08: ", dev->minor);
+#ifdef CONFIG_COMEDI_DAS08_PCI
 	/*  deal with a pci board */
 	if (thisboard->bustype == pci) {
-#ifdef CONFIG_COMEDI_PCI
 		if (it->options[0] || it->options[1]) {
 			printk("bus %i slot %i ",
 			       it->options[0], it->options[1]);
@@ -1037,32 +1068,26 @@ static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		/* Enable local interrupt 1 and pci interrupt */
 		outw(INTR1_ENABLE | PCI_INTR_ENABLE, pci_iobase + INTCSR);
 #endif
-#else /* CONFIG_COMEDI_PCI */
-		printk(KERN_ERR "this driver has not been built with PCI support.\n");
-		return -EINVAL;
-#endif /* CONFIG_COMEDI_PCI */
-	} else {
+	} else
+#endif /* CONFIG_COMEDI_DAS08_PCI */
+	{
 		iobase = it->options[0];
 	}
 	printk(KERN_INFO "\n");
 
 	return das08_common_attach(dev, iobase);
 }
+#endif /* DO_COMEDI_DRIVER_REGISTER */
 
-
-int das08_common_detach(struct comedi_device *dev)
+void das08_common_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: das08: remove\n", dev->minor);
-
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 4);
-
-	/*  deallocate ioports for non-pcmcia, non-pci boards */
 	if ((thisboard->bustype != pcmcia) && (thisboard->bustype != pci)) {
 		if (dev->iobase)
 			release_region(dev->iobase, thisboard->iosize);
 	}
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_DAS08_PCI
 	if (devpriv) {
 		if (devpriv->pdev) {
 			if (devpriv->pci_iobase)
@@ -1072,16 +1097,14 @@ int das08_common_detach(struct comedi_device *dev)
 		}
 	}
 #endif
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(das08_common_detach);
 
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_COMEDI_DAS08_PCI
 static int __devinit driver_das08_pci_probe(struct pci_dev *dev,
 					    const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_das08.driver_name);
+	return comedi_pci_auto_config(dev, &driver_das08);
 }
 
 static void __devexit driver_das08_pci_remove(struct pci_dev *dev)
@@ -1094,43 +1117,38 @@ static struct pci_driver driver_das08_pci_driver = {
 	.probe = &driver_das08_pci_probe,
 	.remove = __devexit_p(&driver_das08_pci_remove)
 };
+#endif /* CONFIG_COMEDI_DAS08_PCI */
 
 static int __init driver_das08_init_module(void)
 {
-	int retval;
+	int retval = 0;
 
+#ifdef DO_COMEDI_DRIVER_REGISTER
 	retval = comedi_driver_register(&driver_das08);
 	if (retval < 0)
 		return retval;
-
+#endif
+#ifdef CONFIG_COMEDI_DAS08_PCI
 	driver_das08_pci_driver.name = (char *)driver_das08.driver_name;
-	return pci_register_driver(&driver_das08_pci_driver);
+	retval = pci_register_driver(&driver_das08_pci_driver);
+#endif
+	return retval;
 }
 
 static void __exit driver_das08_cleanup_module(void)
 {
+#ifdef CONFIG_COMEDI_DAS08_PCI
 	pci_unregister_driver(&driver_das08_pci_driver);
+#endif
+#ifdef DO_COMEDI_DRIVER_REGISTER
 	comedi_driver_unregister(&driver_das08);
+#endif
 }
 
 module_init(driver_das08_init_module);
 module_exit(driver_das08_cleanup_module);
-#else
-static int __init driver_das08_init_module(void)
-{
-	return comedi_driver_register(&driver_das08);
-}
-
-static void __exit driver_das08_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_das08);
-}
-
-module_init(driver_das08_init_module);
-module_exit(driver_das08_cleanup_module);
-#endif
 
-#ifdef CONFIG_COMEDI_PCMCIA
+#ifdef CONFIG_COMEDI_DAS08_CS
 EXPORT_SYMBOL_GPL(das08_cs_boards);
 #endif
 
diff --git a/drivers/staging/comedi/drivers/das08.h b/drivers/staging/comedi/drivers/das08.h
index 2a30d764ddfc..0b92f24b261f 100644
--- a/drivers/staging/comedi/drivers/das08.h
+++ b/drivers/staging/comedi/drivers/das08.h
@@ -74,6 +74,6 @@ struct das08_private_struct {
 extern struct das08_board_struct das08_cs_boards[NUM_DAS08_CS_BOARDS];
 
 int das08_common_attach(struct comedi_device *dev, unsigned long iobase);
-int das08_common_detach(struct comedi_device *dev);
+void das08_common_detach(struct comedi_device *dev);
 
 #endif /* _DAS08_H */
diff --git a/drivers/staging/comedi/drivers/das16.c b/drivers/staging/comedi/drivers/das16.c
index e7905bac92da..998444c1ba32 100644
--- a/drivers/staging/comedi/drivers/das16.c
+++ b/drivers/staging/comedi/drivers/das16.c
@@ -339,38 +339,6 @@ struct munge_info {
 	unsigned have_byte:1;
 };
 
-static int das16_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data);
-static int das16_do_wbits(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data);
-static int das16_di_rbits(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data);
-static int das16_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data);
-
-static int das16_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_cmd *cmd);
-static int das16_cmd_exec(struct comedi_device *dev,
-			  struct comedi_subdevice *s);
-static int das16_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-static void das16_ai_munge(struct comedi_device *dev,
-			   struct comedi_subdevice *s, void *array,
-			   unsigned int num_bytes,
-			   unsigned int start_chan_index);
-
-static void das16_reset(struct comedi_device *dev);
-static irqreturn_t das16_dma_interrupt(int irq, void *d);
-static void das16_timer_interrupt(unsigned long arg);
-static void das16_interrupt(struct comedi_device *dev);
-
-static unsigned int das16_set_pacer(struct comedi_device *dev, unsigned int ns,
-				    int flags);
-static int das1600_mode_detect(struct comedi_device *dev);
-static unsigned int das16_suggest_transfer_size(struct comedi_device *dev,
-						struct comedi_cmd cmd);
-
-static void reg_dump(struct comedi_device *dev);
-
 struct das16_board {
 	const char *name;
 	void *ai;
@@ -389,344 +357,6 @@ struct das16_board {
 	unsigned int id;
 };
 
-static const struct das16_board das16_boards[] = {
-	{
-	 .name = "das-16",
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 15000,
-	 .ai_pg = das16_pg_none,
-	 .ao = das16_ao_winsn,
-	 .ao_nbits = 12,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x10,
-	 .i8254_offset = 0x0c,
-	 .size = 0x14,
-	 .id = 0x00,
-	 },
-	{
-	 .name = "das-16g",
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 15000,
-	 .ai_pg = das16_pg_none,
-	 .ao = das16_ao_winsn,
-	 .ao_nbits = 12,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x10,
-	 .i8254_offset = 0x0c,
-	 .size = 0x14,
-	 .id = 0x00,
-	 },
-	{
-	 .name = "das-16f",
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 8500,
-	 .ai_pg = das16_pg_none,
-	 .ao = das16_ao_winsn,
-	 .ao_nbits = 12,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x10,
-	 .i8254_offset = 0x0c,
-	 .size = 0x14,
-	 .id = 0x00,
-	 },
-	{
-	 .name = "cio-das16",	/*  cio-das16.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 20000,
-	 .ai_pg = das16_pg_none,
-	 .ao = das16_ao_winsn,
-	 .ao_nbits = 12,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x10,
-	 .i8254_offset = 0x0c,
-	 .size = 0x14,
-	 .id = 0x80,
-	 },
-	{
-	 .name = "cio-das16/f",	/*  das16.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_none,
-	 .ao = das16_ao_winsn,
-	 .ao_nbits = 12,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x10,
-	 .i8254_offset = 0x0c,
-	 .size = 0x14,
-	 .id = 0x80,
-	 },
-	{
-	 .name = "cio-das16/jr",	/*  cio-das16jr.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 7692,
-	 .ai_pg = das16_pg_16jr,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0,
-	 .i8254_offset = 0x0c,
-	 .size = 0x10,
-	 .id = 0x00,
-	 },
-	{
-	 .name = "pc104-das16jr",	/*  pc104-das16jr_xx.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 3300,
-	 .ai_pg = das16_pg_16jr,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0,
-	 .i8254_offset = 0x0c,
-	 .size = 0x10,
-	 .id = 0x00,
-	 },
-	{
-	 .name = "cio-das16jr/16",	/*  cio-das16jr_16.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 16,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_16jr_16,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0,
-	 .i8254_offset = 0x0c,
-	 .size = 0x10,
-	 .id = 0x00,
-	 },
-	{
-	 .name = "pc104-das16jr/16",	/*  pc104-das16jr_xx.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 16,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_16jr_16,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0,
-	 .i8254_offset = 0x0c,
-	 .size = 0x10,
-	 .id = 0x00,
-	 },
-	{
-	 .name = "das-1201",	/*  4924.pdf (keithley user's manual) */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 20000,
-	 .ai_pg = das16_pg_none,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x400,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0x20,
-	 },
-	{
-	 .name = "das-1202",	/*  4924.pdf (keithley user's manual) */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_none,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x400,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0x20,
-	 },
-	{
-	/*  4919.pdf and 4922.pdf (keithley user's manual) */
-	 .name = "das-1401",
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_1601,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x0,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0xc0   /*  4919.pdf says id bits are 0xe0, 4922.pdf says 0xc0 */
-	 },
-	{
-	/*  4919.pdf and 4922.pdf (keithley user's manual) */
-	 .name = "das-1402",
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_1602,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x0,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0xc0   /*  4919.pdf says id bits are 0xe0, 4922.pdf says 0xc0 */
-	 },
-	{
-	 .name = "das-1601",	/*  4919.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_1601,
-	 .ao = das16_ao_winsn,
-	 .ao_nbits = 12,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x400,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0xc0},
-	{
-	 .name = "das-1602",	/*  4919.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_1602,
-	 .ao = das16_ao_winsn,
-	 .ao_nbits = 12,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x400,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0xc0},
-	{
-	 .name = "cio-das1401/12",	/*  cio-das1400_series.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 6250,
-	 .ai_pg = das16_pg_1601,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0xc0},
-	{
-	 .name = "cio-das1402/12",	/*  cio-das1400_series.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 6250,
-	 .ai_pg = das16_pg_1602,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0xc0},
-	{
-	 .name = "cio-das1402/16",	/*  cio-das1400_series.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 16,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_1602,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0xc0},
-	{
-	 .name = "cio-das1601/12",	/*  cio-das160x-1x.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 6250,
-	 .ai_pg = das16_pg_1601,
-	 .ao = das16_ao_winsn,
-	 .ao_nbits = 12,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x400,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0xc0},
-	{
-	 .name = "cio-das1602/12",	/*  cio-das160x-1x.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_1602,
-	 .ao = das16_ao_winsn,
-	 .ao_nbits = 12,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x400,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0xc0},
-	{
-	 .name = "cio-das1602/16",	/*  cio-das160x-1x.pdf */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 16,
-	 .ai_speed = 10000,
-	 .ai_pg = das16_pg_1602,
-	 .ao = das16_ao_winsn,
-	 .ao_nbits = 12,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0x400,
-	 .i8254_offset = 0x0c,
-	 .size = 0x408,
-	 .id = 0xc0},
-	{
-	 .name = "cio-das16/330",	/*  ? */
-	 .ai = das16_ai_rinsn,
-	 .ai_nbits = 12,
-	 .ai_speed = 3030,
-	 .ai_pg = das16_pg_16jr,
-	 .ao = NULL,
-	 .di = das16_di_rbits,
-	 .do_ = das16_do_wbits,
-	 .i8255_offset = 0,
-	 .i8254_offset = 0x0c,
-	 .size = 0x14,
-	 .id = 0xf0},
-#if 0
-	{
-	 .name = "das16/330i",	/*  ? */
-	 },
-	{
-	 .name = "das16/jr/ctr5",	/*  ? */
-	 },
-	{
-	/*  cio-das16_m1_16.pdf, this board is a bit quirky, no dma */
-	 .name = "cio-das16/m1/16",
-	 },
-#endif
-};
-
-static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int das16_detach(struct comedi_device *dev);
-static struct comedi_driver driver_das16 = {
-	.driver_name = "das16",
-	.module = THIS_MODULE,
-	.attach = das16_attach,
-	.detach = das16_detach,
-	.board_name = &das16_boards[0].name,
-	.num_names = ARRAY_SIZE(das16_boards),
-	.offset = sizeof(das16_boards[0]),
-};
-
 #define DAS16_TIMEOUT 1000
 
 /* Period for timer interrupt in jiffies.  It's a function
@@ -926,6 +556,62 @@ static int das16_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
 	return 0;
 }
 
+/* utility function that suggests a dma transfer size in bytes */
+static unsigned int das16_suggest_transfer_size(struct comedi_device *dev,
+						struct comedi_cmd cmd)
+{
+	unsigned int size;
+	unsigned int freq;
+
+	/* if we are using timer interrupt, we don't care how long it
+	 * will take to complete transfer since it will be interrupted
+	 * by timer interrupt */
+	if (devpriv->timer_mode)
+		return DAS16_DMA_SIZE;
+
+	/* otherwise, we are relying on dma terminal count interrupt,
+	 * so pick a reasonable size */
+	if (cmd.convert_src == TRIG_TIMER)
+		freq = 1000000000 / cmd.convert_arg;
+	else if (cmd.scan_begin_src == TRIG_TIMER)
+		freq = (1000000000 / cmd.scan_begin_arg) * cmd.chanlist_len;
+	/*  return some default value */
+	else
+		freq = 0xffffffff;
+
+	if (cmd.flags & TRIG_WAKE_EOS) {
+		size = sample_size * cmd.chanlist_len;
+	} else {
+		/*  make buffer fill in no more than 1/3 second */
+		size = (freq / 3) * sample_size;
+	}
+
+	/*  set a minimum and maximum size allowed */
+	if (size > DAS16_DMA_SIZE)
+		size = DAS16_DMA_SIZE - DAS16_DMA_SIZE % sample_size;
+	else if (size < sample_size)
+		size = sample_size;
+
+	if (cmd.stop_src == TRIG_COUNT && size > devpriv->adc_byte_count)
+		size = devpriv->adc_byte_count;
+
+	return size;
+}
+
+static unsigned int das16_set_pacer(struct comedi_device *dev, unsigned int ns,
+				    int rounding_flags)
+{
+	i8253_cascade_ns_to_timer_2div(devpriv->clockbase, &(devpriv->divisor1),
+				       &(devpriv->divisor2), &ns,
+				       rounding_flags & TRIG_ROUND_MASK);
+
+	/* Write the values of ctr1 and ctr2 into counters 1 and 2 */
+	i8254_load(dev->iobase + DAS16_CNTR0_DATA, 0, 1, devpriv->divisor1, 2);
+	i8254_load(dev->iobase + DAS16_CNTR0_DATA, 0, 2, devpriv->divisor2, 2);
+
+	return ns;
+}
+
 static int das16_cmd_exec(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct comedi_async *async = s->async;
@@ -1170,34 +856,6 @@ static int das16_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	return i;
 }
 
-static irqreturn_t das16_dma_interrupt(int irq, void *d)
-{
-	int status;
-	struct comedi_device *dev = d;
-
-	status = inb(dev->iobase + DAS16_STATUS);
-
-	if ((status & DAS16_INT) == 0) {
-		DEBUG_PRINT("spurious interrupt\n");
-		return IRQ_NONE;
-	}
-
-	/* clear interrupt */
-	outb(0x00, dev->iobase + DAS16_STATUS);
-	das16_interrupt(dev);
-	return IRQ_HANDLED;
-}
-
-static void das16_timer_interrupt(unsigned long arg)
-{
-	struct comedi_device *dev = (struct comedi_device *)arg;
-
-	das16_interrupt(dev);
-
-	if (devpriv->timer_running)
-		mod_timer(&devpriv->timer, jiffies + timer_period());
-}
-
 /* the pc104-das16jr (at least) has problems if the dma
 	transfer is interrupted in the middle of transferring
 	a 16 bit sample, so this function takes care to get
@@ -1309,18 +967,32 @@ static void das16_interrupt(struct comedi_device *dev)
 	cfc_handle_events(dev, s);
 }
 
-static unsigned int das16_set_pacer(struct comedi_device *dev, unsigned int ns,
-				    int rounding_flags)
+static irqreturn_t das16_dma_interrupt(int irq, void *d)
 {
-	i8253_cascade_ns_to_timer_2div(devpriv->clockbase, &(devpriv->divisor1),
-				       &(devpriv->divisor2), &ns,
-				       rounding_flags & TRIG_ROUND_MASK);
+	int status;
+	struct comedi_device *dev = d;
 
-	/* Write the values of ctr1 and ctr2 into counters 1 and 2 */
-	i8254_load(dev->iobase + DAS16_CNTR0_DATA, 0, 1, devpriv->divisor1, 2);
-	i8254_load(dev->iobase + DAS16_CNTR0_DATA, 0, 2, devpriv->divisor2, 2);
+	status = inb(dev->iobase + DAS16_STATUS);
 
-	return ns;
+	if ((status & DAS16_INT) == 0) {
+		DEBUG_PRINT("spurious interrupt\n");
+		return IRQ_NONE;
+	}
+
+	/* clear interrupt */
+	outb(0x00, dev->iobase + DAS16_STATUS);
+	das16_interrupt(dev);
+	return IRQ_HANDLED;
+}
+
+static void das16_timer_interrupt(unsigned long arg)
+{
+	struct comedi_device *dev = (struct comedi_device *)arg;
+
+	das16_interrupt(dev);
+
+	if (devpriv->timer_running)
+		mod_timer(&devpriv->timer, jiffies + timer_period());
 }
 
 static void reg_dump(struct comedi_device *dev)
@@ -1394,6 +1066,22 @@ static int das1600_mode_detect(struct comedi_device *dev)
 	return 0;
 }
 
+static void das16_ai_munge(struct comedi_device *dev,
+			   struct comedi_subdevice *s, void *array,
+			   unsigned int num_bytes,
+			   unsigned int start_chan_index)
+{
+	unsigned int i, num_samples = num_bytes / sizeof(short);
+	short *data = array;
+
+	for (i = 0; i < num_samples; i++) {
+		data[i] = le16_to_cpu(data[i]);
+		if (thisboard->ai_nbits == 12)
+			data[i] = (data[i] >> 4) & 0xfff;
+
+	}
+}
+
 /*
  *
  * Options list:
@@ -1402,7 +1090,6 @@ static int das1600_mode_detect(struct comedi_device *dev)
  *   2  DMA
  *   3  Clock speed (in MHz)
  */
-
 static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
@@ -1675,15 +1362,11 @@ static int das16_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int das16_detach(struct comedi_device *dev)
+static void das16_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: das16: remove\n", dev->minor);
-
 	das16_reset(dev);
-
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 4);
-
 	if (devpriv) {
 		int i;
 		for (i = 0; i < 2; i++) {
@@ -1698,10 +1381,8 @@ static int das16_detach(struct comedi_device *dev)
 		kfree(devpriv->user_ai_range_table);
 		kfree(devpriv->user_ao_range_table);
 	}
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (dev->iobase) {
 		if (thisboard->size < 0x400) {
 			release_region(dev->iobase, thisboard->size);
@@ -1711,80 +1392,318 @@ static int das16_detach(struct comedi_device *dev)
 				       thisboard->size & 0x3ff);
 		}
 	}
-
-	return 0;
 }
 
-static int __init driver_das16_init_module(void)
-{
-	return comedi_driver_register(&driver_das16);
-}
-
-static void __exit driver_das16_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_das16);
-}
-
-module_init(driver_das16_init_module);
-module_exit(driver_das16_cleanup_module);
-
-/* utility function that suggests a dma transfer size in bytes */
-static unsigned int das16_suggest_transfer_size(struct comedi_device *dev,
-						struct comedi_cmd cmd)
-{
-	unsigned int size;
-	unsigned int freq;
-
-	/* if we are using timer interrupt, we don't care how long it
-	 * will take to complete transfer since it will be interrupted
-	 * by timer interrupt */
-	if (devpriv->timer_mode)
-		return DAS16_DMA_SIZE;
-
-	/* otherwise, we are relying on dma terminal count interrupt,
-	 * so pick a reasonable size */
-	if (cmd.convert_src == TRIG_TIMER)
-		freq = 1000000000 / cmd.convert_arg;
-	else if (cmd.scan_begin_src == TRIG_TIMER)
-		freq = (1000000000 / cmd.scan_begin_arg) * cmd.chanlist_len;
-	/*  return some default value */
-	else
-		freq = 0xffffffff;
-
-	if (cmd.flags & TRIG_WAKE_EOS) {
-		size = sample_size * cmd.chanlist_len;
-	} else {
-		/*  make buffer fill in no more than 1/3 second */
-		size = (freq / 3) * sample_size;
-	}
-
-	/*  set a minimum and maximum size allowed */
-	if (size > DAS16_DMA_SIZE)
-		size = DAS16_DMA_SIZE - DAS16_DMA_SIZE % sample_size;
-	else if (size < sample_size)
-		size = sample_size;
-
-	if (cmd.stop_src == TRIG_COUNT && size > devpriv->adc_byte_count)
-		size = devpriv->adc_byte_count;
-
-	return size;
-}
-
-static void das16_ai_munge(struct comedi_device *dev,
-			   struct comedi_subdevice *s, void *array,
-			   unsigned int num_bytes,
-			   unsigned int start_chan_index)
-{
-	unsigned int i, num_samples = num_bytes / sizeof(short);
-	short *data = array;
-
-	for (i = 0; i < num_samples; i++) {
-		data[i] = le16_to_cpu(data[i]);
-		if (thisboard->ai_nbits == 12)
-			data[i] = (data[i] >> 4) & 0xfff;
+static const struct das16_board das16_boards[] = {
+	{
+		.name		= "das-16",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 15000,
+		.ai_pg		= das16_pg_none,
+		.ao		= das16_ao_winsn,
+		.ao_nbits	= 12,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x10,
+		.i8254_offset	= 0x0c,
+		.size		= 0x14,
+		.id		= 0x00,
+	}, {
+		.name		= "das-16g",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 15000,
+		.ai_pg		= das16_pg_none,
+		.ao		= das16_ao_winsn,
+		.ao_nbits	= 12,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x10,
+		.i8254_offset	= 0x0c,
+		.size		= 0x14,
+		.id		= 0x00,
+	}, {
+		.name		= "das-16f",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 8500,
+		.ai_pg		= das16_pg_none,
+		.ao		= das16_ao_winsn,
+		.ao_nbits	= 12,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x10,
+		.i8254_offset	= 0x0c,
+		.size		= 0x14,
+		.id		= 0x00,
+	}, {
+		.name		= "cio-das16",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 20000,
+		.ai_pg		= das16_pg_none,
+		.ao		= das16_ao_winsn,
+		.ao_nbits	= 12,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x10,
+		.i8254_offset	= 0x0c,
+		.size		= 0x14,
+		.id		= 0x80,
+	}, {
+		.name		= "cio-das16/f",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_none,
+		.ao		= das16_ao_winsn,
+		.ao_nbits	= 12,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x10,
+		.i8254_offset	= 0x0c,
+		.size		= 0x14,
+		.id		= 0x80,
+	}, {
+		.name		= "cio-das16/jr",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 7692,
+		.ai_pg		= das16_pg_16jr,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0,
+		.i8254_offset	= 0x0c,
+		.size		= 0x10,
+		.id		= 0x00,
+	}, {
+		.name		= "pc104-das16jr",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 3300,
+		.ai_pg		= das16_pg_16jr,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0,
+		.i8254_offset	= 0x0c,
+		.size		= 0x10,
+		.id		= 0x00,
+	}, {
+		.name		= "cio-das16jr/16",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 16,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_16jr_16,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0,
+		.i8254_offset	= 0x0c,
+		.size		= 0x10,
+		.id		= 0x00,
+	}, {
+		.name		= "pc104-das16jr/16",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 16,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_16jr_16,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0,
+		.i8254_offset	= 0x0c,
+		.size		= 0x10,
+		.id		= 0x00,
+	}, {
+		.name		= "das-1201",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 20000,
+		.ai_pg		= das16_pg_none,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x400,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0x20,
+	}, {
+		.name		= "das-1202",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_none,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x400,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0x20,
+	}, {
+		.name		= "das-1401",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_1601,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x0,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0xc0,
+	}, {
+		.name		= "das-1402",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_1602,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x0,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0xc0,
+	}, {
+		.name		= "das-1601",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_1601,
+		.ao		= das16_ao_winsn,
+		.ao_nbits	= 12,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x400,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0xc0,
+	}, {
+		.name		= "das-1602",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_1602,
+		.ao		= das16_ao_winsn,
+		.ao_nbits	= 12,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x400,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0xc0,
+	}, {
+		.name		= "cio-das1401/12",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 6250,
+		.ai_pg		= das16_pg_1601,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0xc0,
+	}, {
+		.name		= "cio-das1402/12",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 6250,
+		.ai_pg		= das16_pg_1602,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0xc0,
+	}, {
+		.name		= "cio-das1402/16",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 16,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_1602,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0xc0,
+	}, {
+		.name		= "cio-das1601/12",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 6250,
+		.ai_pg		= das16_pg_1601,
+		.ao		= das16_ao_winsn,
+		.ao_nbits	= 12,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x400,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0xc0,
+	}, {
+		.name		= "cio-das1602/12",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_1602,
+		.ao		= das16_ao_winsn,
+		.ao_nbits	= 12,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x400,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0xc0,
+	}, {
+		.name		= "cio-das1602/16",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 16,
+		.ai_speed	= 10000,
+		.ai_pg		= das16_pg_1602,
+		.ao		= das16_ao_winsn,
+		.ao_nbits	= 12,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0x400,
+		.i8254_offset	= 0x0c,
+		.size		= 0x408,
+		.id		= 0xc0,
+	}, {
+		.name		= "cio-das16/330",
+		.ai		= das16_ai_rinsn,
+		.ai_nbits	= 12,
+		.ai_speed	= 3030,
+		.ai_pg		= das16_pg_16jr,
+		.ao		= NULL,
+		.di		= das16_di_rbits,
+		.do_		= das16_do_wbits,
+		.i8255_offset	= 0,
+		.i8254_offset	= 0x0c,
+		.size		= 0x14,
+		.id		= 0xf0,
+	},
+};
 
-	}
-}
+static struct comedi_driver das16_driver = {
+	.driver_name	= "das16",
+	.module		= THIS_MODULE,
+	.attach		= das16_attach,
+	.detach		= das16_detach,
+	.board_name	= &das16_boards[0].name,
+	.num_names	= ARRAY_SIZE(das16_boards),
+	.offset		= sizeof(das16_boards[0]),
+};
+module_comedi_driver(das16_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/das16m1.c b/drivers/staging/comedi/drivers/das16m1.c
index 5376e718e3d7..d2e1490cd808 100644
--- a/drivers/staging/comedi/drivers/das16m1.c
+++ b/drivers/staging/comedi/drivers/das16m1.c
@@ -132,57 +132,11 @@ static const struct comedi_lrange range_das16m1 = { 9,
 	 }
 };
 
-static int das16m1_do_wbits(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-static int das16m1_di_rbits(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-static int das16m1_ai_rinsn(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-
-static int das16m1_cmd_test(struct comedi_device *dev,
-			    struct comedi_subdevice *s, struct comedi_cmd *cmd);
-static int das16m1_cmd_exec(struct comedi_device *dev,
-			    struct comedi_subdevice *s);
-static int das16m1_cancel(struct comedi_device *dev,
-			  struct comedi_subdevice *s);
-
-static int das16m1_poll(struct comedi_device *dev, struct comedi_subdevice *s);
-static irqreturn_t das16m1_interrupt(int irq, void *d);
-static void das16m1_handler(struct comedi_device *dev, unsigned int status);
-
-static unsigned int das16m1_set_pacer(struct comedi_device *dev,
-				      unsigned int ns, int round_flag);
-
-static int das16m1_irq_bits(unsigned int irq);
-
 struct das16m1_board {
 	const char *name;
 	unsigned int ai_speed;
 };
 
-static const struct das16m1_board das16m1_boards[] = {
-	{
-	 .name = "cio-das16/m1",	/*  CIO-DAS16_M1.pdf */
-	 .ai_speed = 1000,	/*  1MHz max speed */
-	 },
-};
-
-static int das16m1_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int das16m1_detach(struct comedi_device *dev);
-static struct comedi_driver driver_das16m1 = {
-	.driver_name = "das16m1",
-	.module = THIS_MODULE,
-	.attach = das16m1_attach,
-	.detach = das16m1_detach,
-	.board_name = &das16m1_boards[0].name,
-	.num_names = ARRAY_SIZE(das16m1_boards),
-	.offset = sizeof(das16m1_boards[0]),
-};
-
 struct das16m1_private_struct {
 	unsigned int control_state;
 	volatile unsigned int adc_count;	/*  number of samples completed */
@@ -198,22 +152,17 @@ struct das16m1_private_struct {
 #define devpriv ((struct das16m1_private_struct *)(dev->private))
 #define thisboard ((const struct das16m1_board *)(dev->board_ptr))
 
-static int __init driver_das16m1_init_module(void)
+static inline short munge_sample(short data)
 {
-	return comedi_driver_register(&driver_das16m1);
+	return (data >> 4) & 0xfff;
 }
 
-static void __exit driver_das16m1_cleanup_module(void)
+static void munge_sample_array(short *array, unsigned int num_elements)
 {
-	comedi_driver_unregister(&driver_das16m1);
-}
-
-module_init(driver_das16m1_init_module);
-module_exit(driver_das16m1_cleanup_module);
+	unsigned int i;
 
-static inline short munge_sample(short data)
-{
-	return (data >> 4) & 0xfff;
+	for (i = 0; i < num_elements; i++)
+		array[i] = munge_sample(array[i]);
 }
 
 static int das16m1_cmd_test(struct comedi_device *dev,
@@ -340,6 +289,25 @@ static int das16m1_cmd_test(struct comedi_device *dev,
 	return 0;
 }
 
+/* This function takes a time in nanoseconds and sets the     *
+ * 2 pacer clocks to the closest frequency possible. It also  *
+ * returns the actual sampling period.                        */
+static unsigned int das16m1_set_pacer(struct comedi_device *dev,
+				      unsigned int ns, int rounding_flags)
+{
+	i8253_cascade_ns_to_timer_2div(DAS16M1_XTAL, &(devpriv->divisor1),
+				       &(devpriv->divisor2), &ns,
+				       rounding_flags & TRIG_ROUND_MASK);
+
+	/* Write the values of ctr1 and ctr2 into counters 1 and 2 */
+	i8254_load(dev->iobase + DAS16M1_8254_SECOND, 0, 1, devpriv->divisor1,
+		   2);
+	i8254_load(dev->iobase + DAS16M1_8254_SECOND, 0, 2, devpriv->divisor2,
+		   2);
+
+	return ns;
+}
+
 static int das16m1_cmd_exec(struct comedi_device *dev,
 			    struct comedi_subdevice *s)
 {
@@ -484,57 +452,6 @@ static int das16m1_do_wbits(struct comedi_device *dev,
 	return 2;
 }
 
-static int das16m1_poll(struct comedi_device *dev, struct comedi_subdevice *s)
-{
-	unsigned long flags;
-	unsigned int status;
-
-	/*  prevent race with interrupt handler */
-	spin_lock_irqsave(&dev->spinlock, flags);
-	status = inb(dev->iobase + DAS16M1_CS);
-	das16m1_handler(dev, status);
-	spin_unlock_irqrestore(&dev->spinlock, flags);
-
-	return s->async->buf_write_count - s->async->buf_read_count;
-}
-
-static irqreturn_t das16m1_interrupt(int irq, void *d)
-{
-	int status;
-	struct comedi_device *dev = d;
-
-	if (dev->attached == 0) {
-		comedi_error(dev, "premature interrupt");
-		return IRQ_HANDLED;
-	}
-	/*  prevent race with comedi_poll() */
-	spin_lock(&dev->spinlock);
-
-	status = inb(dev->iobase + DAS16M1_CS);
-
-	if ((status & (IRQDATA | OVRUN)) == 0) {
-		comedi_error(dev, "spurious interrupt");
-		spin_unlock(&dev->spinlock);
-		return IRQ_NONE;
-	}
-
-	das16m1_handler(dev, status);
-
-	/* clear interrupt */
-	outb(0, dev->iobase + DAS16M1_CLEAR_INTR);
-
-	spin_unlock(&dev->spinlock);
-	return IRQ_HANDLED;
-}
-
-static void munge_sample_array(short *array, unsigned int num_elements)
-{
-	unsigned int i;
-
-	for (i = 0; i < num_elements; i++)
-		array[i] = munge_sample(array[i]);
-}
-
 static void das16m1_handler(struct comedi_device *dev, unsigned int status)
 {
 	struct comedi_subdevice *s;
@@ -596,23 +513,47 @@ static void das16m1_handler(struct comedi_device *dev, unsigned int status)
 
 }
 
-/* This function takes a time in nanoseconds and sets the     *
- * 2 pacer clocks to the closest frequency possible. It also  *
- * returns the actual sampling period.                        */
-static unsigned int das16m1_set_pacer(struct comedi_device *dev,
-				      unsigned int ns, int rounding_flags)
+static int das16m1_poll(struct comedi_device *dev, struct comedi_subdevice *s)
 {
-	i8253_cascade_ns_to_timer_2div(DAS16M1_XTAL, &(devpriv->divisor1),
-				       &(devpriv->divisor2), &ns,
-				       rounding_flags & TRIG_ROUND_MASK);
+	unsigned long flags;
+	unsigned int status;
 
-	/* Write the values of ctr1 and ctr2 into counters 1 and 2 */
-	i8254_load(dev->iobase + DAS16M1_8254_SECOND, 0, 1, devpriv->divisor1,
-		   2);
-	i8254_load(dev->iobase + DAS16M1_8254_SECOND, 0, 2, devpriv->divisor2,
-		   2);
+	/*  prevent race with interrupt handler */
+	spin_lock_irqsave(&dev->spinlock, flags);
+	status = inb(dev->iobase + DAS16M1_CS);
+	das16m1_handler(dev, status);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
 
-	return ns;
+	return s->async->buf_write_count - s->async->buf_read_count;
+}
+
+static irqreturn_t das16m1_interrupt(int irq, void *d)
+{
+	int status;
+	struct comedi_device *dev = d;
+
+	if (dev->attached == 0) {
+		comedi_error(dev, "premature interrupt");
+		return IRQ_HANDLED;
+	}
+	/*  prevent race with comedi_poll() */
+	spin_lock(&dev->spinlock);
+
+	status = inb(dev->iobase + DAS16M1_CS);
+
+	if ((status & (IRQDATA | OVRUN)) == 0) {
+		comedi_error(dev, "spurious interrupt");
+		spin_unlock(&dev->spinlock);
+		return IRQ_NONE;
+	}
+
+	das16m1_handler(dev, status);
+
+	/* clear interrupt */
+	outb(0, dev->iobase + DAS16M1_CLEAR_INTR);
+
+	spin_unlock(&dev->spinlock);
+	return IRQ_HANDLED;
 }
 
 static int das16m1_irq_bits(unsigned int irq)
@@ -656,7 +597,6 @@ static int das16m1_irq_bits(unsigned int irq)
  *   0  I/O base
  *   1  IRQ
  */
-
 static int das16m1_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@@ -673,12 +613,12 @@ static int das16m1_attach(struct comedi_device *dev,
 
 	dev->board_name = thisboard->name;
 
-	if (!request_region(iobase, DAS16M1_SIZE, driver_das16m1.driver_name)) {
+	if (!request_region(iobase, DAS16M1_SIZE, dev->driver->driver_name)) {
 		comedi_error(dev, "I/O port conflict\n");
 		return -EIO;
 	}
 	if (!request_region(iobase + DAS16M1_82C55, DAS16M1_SIZE2,
-			    driver_das16m1.driver_name)) {
+			    dev->driver->driver_name)) {
 		release_region(iobase, DAS16M1_SIZE);
 		comedi_error(dev, "I/O port conflict\n");
 		return -EIO;
@@ -690,7 +630,7 @@ static int das16m1_attach(struct comedi_device *dev,
 	/*  make sure it is valid */
 	if (das16m1_irq_bits(irq) >= 0) {
 		ret = request_irq(irq, das16m1_interrupt, 0,
-				  driver_das16m1.driver_name, dev);
+				  dev->driver->driver_name, dev);
 		if (ret < 0)
 			return ret;
 		dev->irq = irq;
@@ -763,25 +703,36 @@ static int das16m1_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int das16m1_detach(struct comedi_device *dev)
+static void das16m1_detach(struct comedi_device *dev)
 {
-
-/* das16m1_reset(dev); */
-
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 3);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (dev->iobase) {
 		release_region(dev->iobase, DAS16M1_SIZE);
 		release_region(dev->iobase + DAS16M1_82C55, DAS16M1_SIZE2);
 	}
-
-	return 0;
 }
 
+static const struct das16m1_board das16m1_boards[] = {
+	{
+		.name		= "cio-das16/m1",	/*  CIO-DAS16_M1.pdf */
+		.ai_speed	= 1000,			/*  1MHz max speed */
+	},
+};
+
+static struct comedi_driver das16m1_driver = {
+	.driver_name	= "das16m1",
+	.module		= THIS_MODULE,
+	.attach		= das16m1_attach,
+	.detach		= das16m1_detach,
+	.board_name	= &das16m1_boards[0].name,
+	.num_names	= ARRAY_SIZE(das16m1_boards),
+	.offset		= sizeof(das16m1_boards[0]),
+};
+module_comedi_driver(das16m1_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index 99ada5a53b9e..2ac344354c1d 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -183,9 +183,6 @@ enum {
 	das1802hr, das1802hr_da, das1801hc, das1802hc, das1801ao, das1802ao
 };
 
-static int das1800_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int das1800_detach(struct comedi_device *dev);
 static int das1800_probe(struct comedi_device *dev);
 static int das1800_cancel(struct comedi_device *dev,
 			  struct comedi_subdevice *s);
@@ -518,33 +515,6 @@ static const struct comedi_lrange range_ao_2 = {
 };
 */
 
-static struct comedi_driver driver_das1800 = {
-	.driver_name = "das1800",
-	.module = THIS_MODULE,
-	.attach = das1800_attach,
-	.detach = das1800_detach,
-	.num_names = ARRAY_SIZE(das1800_boards),
-	.board_name = &das1800_boards[0].name,
-	.offset = sizeof(struct das1800_board),
-};
-
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __init driver_das1800_init_module(void)
-{
-	return comedi_driver_register(&driver_das1800);
-}
-
-static void __exit driver_das1800_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_das1800);
-}
-
-module_init(driver_das1800_init_module);
-module_exit(driver_das1800_cleanup_module);
-
 static int das1800_init_dma(struct comedi_device *dev, unsigned int dma0,
 			    unsigned int dma1)
 {
@@ -579,7 +549,7 @@ static int das1800_init_dma(struct comedi_device *dev, unsigned int dma0,
 			return -EINVAL;
 			break;
 		}
-		if (request_dma(dma0, driver_das1800.driver_name)) {
+		if (request_dma(dma0, dev->driver->driver_name)) {
 			dev_err(dev->hw_dev, "failed to allocate dma channel %i\n",
 				dma0);
 			return -EINVAL;
@@ -587,7 +557,7 @@ static int das1800_init_dma(struct comedi_device *dev, unsigned int dma0,
 		devpriv->dma0 = dma0;
 		devpriv->dma_current = dma0;
 		if (dma1) {
-			if (request_dma(dma1, driver_das1800.driver_name)) {
+			if (request_dma(dma1, dev->driver->driver_name)) {
 				dev_err(dev->hw_dev, "failed to allocate dma channel %i\n",
 					dma1);
 				return -EINVAL;
@@ -633,7 +603,7 @@ static int das1800_attach(struct comedi_device *dev,
 		return -ENOMEM;
 
 	printk(KERN_DEBUG "comedi%d: %s: io 0x%lx", dev->minor,
-	       driver_das1800.driver_name, iobase);
+	       dev->driver->driver_name, iobase);
 	if (irq) {
 		printk(KERN_CONT ", irq %u", irq);
 		if (dma0) {
@@ -650,7 +620,7 @@ static int das1800_attach(struct comedi_device *dev,
 	}
 
 	/* check if io addresses are available */
-	if (!request_region(iobase, DAS1800_SIZE, driver_das1800.driver_name)) {
+	if (!request_region(iobase, DAS1800_SIZE, dev->driver->driver_name)) {
 		printk
 		    (" I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
 		     iobase, iobase + DAS1800_SIZE - 1);
@@ -671,7 +641,7 @@ static int das1800_attach(struct comedi_device *dev,
 	if (thisboard->ao_ability == 2) {
 		iobase2 = iobase + IOBASE2;
 		if (!request_region(iobase2, DAS1800_SIZE,
-				    driver_das1800.driver_name)) {
+				    dev->driver->driver_name)) {
 			printk
 			    (" I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
 			     iobase2, iobase2 + DAS1800_SIZE - 1);
@@ -683,7 +653,7 @@ static int das1800_attach(struct comedi_device *dev,
 	/* grab our IRQ */
 	if (irq) {
 		if (request_irq(irq, das1800_interrupt, 0,
-				driver_das1800.driver_name, dev)) {
+				dev->driver->driver_name, dev)) {
 			dev_dbg(dev->hw_dev, "unable to allocate irq %u\n",
 				irq);
 			return -EINVAL;
@@ -797,9 +767,8 @@ static int das1800_attach(struct comedi_device *dev,
 	return 0;
 };
 
-static int das1800_detach(struct comedi_device *dev)
+static void das1800_detach(struct comedi_device *dev)
 {
-	/* only free stuff if it has been allocated by _attach */
 	if (dev->iobase)
 		release_region(dev->iobase, DAS1800_SIZE);
 	if (dev->irq)
@@ -814,11 +783,6 @@ static int das1800_detach(struct comedi_device *dev)
 		kfree(devpriv->ai_buf0);
 		kfree(devpriv->ai_buf1);
 	}
-
-	dev_dbg(dev->hw_dev, "comedi%d: %s: remove\n", dev->minor,
-		driver_das1800.driver_name);
-
-	return 0;
 };
 
 /* probes and checks das-1800 series board type
@@ -1811,6 +1775,17 @@ static unsigned int suggest_transfer_size(struct comedi_cmd *cmd)
 	return size;
 }
 
+static struct comedi_driver das1800_driver = {
+	.driver_name	= "das1800",
+	.module		= THIS_MODULE,
+	.attach		= das1800_attach,
+	.detach		= das1800_detach,
+	.num_names	= ARRAY_SIZE(das1800_boards),
+	.board_name	= &das1800_boards[0].name,
+	.offset		= sizeof(struct das1800_board),
+};
+module_comedi_driver(das1800_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/das6402.c b/drivers/staging/comedi/drivers/das6402.c
index f25684145e84..881f392d1dba 100644
--- a/drivers/staging/comedi/drivers/das6402.c
+++ b/drivers/staging/comedi/drivers/das6402.c
@@ -99,29 +99,6 @@ This driver has suffered bitrot.
 #define	C2 0x80
 #define	RWLH 0x30
 
-static int das6402_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int das6402_detach(struct comedi_device *dev);
-static struct comedi_driver driver_das6402 = {
-	.driver_name = "das6402",
-	.module = THIS_MODULE,
-	.attach = das6402_attach,
-	.detach = das6402_detach,
-};
-
-static int __init driver_das6402_init_module(void)
-{
-	return comedi_driver_register(&driver_das6402);
-}
-
-static void __exit driver_das6402_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_das6402);
-}
-
-module_init(driver_das6402_init_module);
-module_exit(driver_das6402_cleanup_module);
-
 struct das6402_private {
 	int ai_bytes_to_read;
 
@@ -130,7 +107,14 @@ struct das6402_private {
 #define devpriv ((struct das6402_private *)dev->private)
 
 static void das6402_ai_fifo_dregs(struct comedi_device *dev,
-				  struct comedi_subdevice *s);
+				  struct comedi_subdevice *s)
+{
+	while (1) {
+		if (!(inb(dev->iobase + 8) & 0x01))
+			return;
+		comedi_buf_put(s->async, inw(dev->iobase));
+	}
+}
 
 static void das6402_setcounter(struct comedi_device *dev)
 {
@@ -209,16 +193,6 @@ static void das6402_ai_fifo_read(struct comedi_device *dev, short *data, int n)
 }
 #endif
 
-static void das6402_ai_fifo_dregs(struct comedi_device *dev,
-				  struct comedi_subdevice *s)
-{
-	while (1) {
-		if (!(inb(dev->iobase + 8) & 0x01))
-			return;
-		comedi_buf_put(s->async, inw(dev->iobase));
-	}
-}
-
 static int das6402_ai_cancel(struct comedi_device *dev,
 			     struct comedi_subdevice *s)
 {
@@ -300,16 +274,6 @@ static int board_init(struct comedi_device *dev)
 	return 0;
 }
 
-static int das6402_detach(struct comedi_device *dev)
-{
-	if (dev->irq)
-		free_irq(dev->irq, dev);
-	if (dev->iobase)
-		release_region(dev->iobase, DAS6402_SIZE);
-
-	return 0;
-}
-
 static int das6402_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
@@ -363,6 +327,22 @@ static int das6402_attach(struct comedi_device *dev,
 	return 0;
 }
 
+static void das6402_detach(struct comedi_device *dev)
+{
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+	if (dev->iobase)
+		release_region(dev->iobase, DAS6402_SIZE);
+}
+
+static struct comedi_driver das6402_driver = {
+	.driver_name	= "das6402",
+	.module		= THIS_MODULE,
+	.attach		= das6402_attach,
+	.detach		= das6402_detach,
+};
+module_comedi_driver(das6402_driver)
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index 6e347b40fe61..a3a54e1c5c98 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -245,7 +245,7 @@ struct das800_private {
 
 static int das800_attach(struct comedi_device *dev,
 			 struct comedi_devconfig *it);
-static int das800_detach(struct comedi_device *dev);
+static void das800_detach(struct comedi_device *dev);
 static int das800_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 
 static struct comedi_driver driver_das800 = {
@@ -556,16 +556,12 @@ static int das800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 };
 
-static int das800_detach(struct comedi_device *dev)
+static void das800_detach(struct comedi_device *dev)
 {
-	dev_info(dev->hw_dev, "comedi%d: das800: remove\n", dev->minor);
-
-	/* only free stuff if it has been allocated by _attach */
 	if (dev->iobase)
 		release_region(dev->iobase, DAS800_SIZE);
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-	return 0;
 };
 
 static int das800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index 2b4e6e6eb825..83828903db4b 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -224,7 +224,7 @@ struct dmm32at_private {
  */
 static int dmm32at_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it);
-static int dmm32at_detach(struct comedi_device *dev);
+static void dmm32at_detach(struct comedi_device *dev);
 static struct comedi_driver driver_dmm32at = {
 	.driver_name = "dmm32at",
 	.module = THIS_MODULE,
@@ -450,23 +450,12 @@ static int dmm32at_attach(struct comedi_device *dev,
 
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int dmm32at_detach(struct comedi_device *dev)
+static void dmm32at_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: dmm32at: remove\n", dev->minor);
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if (dev->iobase)
 		release_region(dev->iobase, DMM32AT_MEMSIZE);
-
-	return 0;
 }
 
 /*
diff --git a/drivers/staging/comedi/drivers/dt2801.c b/drivers/staging/comedi/drivers/dt2801.c
index b85c8366a396..625bd617a8e9 100644
--- a/drivers/staging/comedi/drivers/dt2801.c
+++ b/drivers/staging/comedi/drivers/dt2801.c
@@ -88,29 +88,6 @@ Configuration options:
 #define DT2801_STATUS		1
 #define DT2801_CMD		1
 
-static int dt2801_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int dt2801_detach(struct comedi_device *dev);
-static struct comedi_driver driver_dt2801 = {
-	.driver_name = "dt2801",
-	.module = THIS_MODULE,
-	.attach = dt2801_attach,
-	.detach = dt2801_detach,
-};
-
-static int __init driver_dt2801_init_module(void)
-{
-	return comedi_driver_register(&driver_dt2801);
-}
-
-static void __exit driver_dt2801_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_dt2801);
-}
-
-module_init(driver_dt2801_init_module);
-module_exit(driver_dt2801_cleanup_module);
-
 #if 0
 /* ignore 'defined but not used' warning */
 static const struct comedi_lrange range_dt2801_ai_pgh_bipolar = { 4, {
@@ -258,22 +235,6 @@ struct dt2801_private {
 
 #define devpriv ((struct dt2801_private *)dev->private)
 
-static int dt2801_ai_insn_read(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int dt2801_ao_insn_read(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int dt2801_ao_insn_write(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-static int dt2801_dio_insn_bits(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-static int dt2801_dio_insn_config(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data);
-
 /* These are the low-level routines:
    writecommand: write a command to the board
    writedata: write data byte
@@ -503,6 +464,123 @@ static const struct comedi_lrange *ai_range_lkup(int type, int opt)
 	return &range_unknown;
 }
 
+static int dt2801_error(struct comedi_device *dev, int stat)
+{
+	if (stat < 0) {
+		if (stat == -ETIME)
+			printk("dt2801: timeout\n");
+		else
+			printk("dt2801: error %d\n", stat);
+		return stat;
+	}
+	printk("dt2801: error status 0x%02x, resetting...\n", stat);
+
+	dt2801_reset(dev);
+	dt2801_reset(dev);
+
+	return -EIO;
+}
+
+static int dt2801_ai_insn_read(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn, unsigned int *data)
+{
+	int d;
+	int stat;
+	int i;
+
+	for (i = 0; i < insn->n; i++) {
+		stat = dt2801_writecmd(dev, DT_C_READ_ADIM);
+		dt2801_writedata(dev, CR_RANGE(insn->chanspec));
+		dt2801_writedata(dev, CR_CHAN(insn->chanspec));
+		stat = dt2801_readdata2(dev, &d);
+
+		if (stat != 0)
+			return dt2801_error(dev, stat);
+
+		data[i] = d;
+	}
+
+	return i;
+}
+
+static int dt2801_ao_insn_read(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn, unsigned int *data)
+{
+	data[0] = devpriv->ao_readback[CR_CHAN(insn->chanspec)];
+
+	return 1;
+}
+
+static int dt2801_ao_insn_write(struct comedi_device *dev,
+				struct comedi_subdevice *s,
+				struct comedi_insn *insn, unsigned int *data)
+{
+	dt2801_writecmd(dev, DT_C_WRITE_DAIM);
+	dt2801_writedata(dev, CR_CHAN(insn->chanspec));
+	dt2801_writedata2(dev, data[0]);
+
+	devpriv->ao_readback[CR_CHAN(insn->chanspec)] = data[0];
+
+	return 1;
+}
+
+static int dt2801_dio_insn_bits(struct comedi_device *dev,
+				struct comedi_subdevice *s,
+				struct comedi_insn *insn, unsigned int *data)
+{
+	int which = 0;
+
+	if (s == dev->subdevices + 4)
+		which = 1;
+
+	if (insn->n != 2)
+		return -EINVAL;
+	if (data[0]) {
+		s->state &= ~data[0];
+		s->state |= (data[0] & data[1]);
+		dt2801_writecmd(dev, DT_C_WRITE_DIG);
+		dt2801_writedata(dev, which);
+		dt2801_writedata(dev, s->state);
+	}
+	dt2801_writecmd(dev, DT_C_READ_DIG);
+	dt2801_writedata(dev, which);
+	dt2801_readdata(dev, data + 1);
+
+	return 2;
+}
+
+static int dt2801_dio_insn_config(struct comedi_device *dev,
+				  struct comedi_subdevice *s,
+				  struct comedi_insn *insn, unsigned int *data)
+{
+	int which = 0;
+
+	if (s == dev->subdevices + 4)
+		which = 1;
+
+	/* configure */
+	switch (data[0]) {
+	case INSN_CONFIG_DIO_OUTPUT:
+		s->io_bits = 0xff;
+		dt2801_writecmd(dev, DT_C_SET_DIGOUT);
+		break;
+	case INSN_CONFIG_DIO_INPUT:
+		s->io_bits = 0;
+		dt2801_writecmd(dev, DT_C_SET_DIGIN);
+		break;
+	case INSN_CONFIG_DIO_QUERY:
+		data[1] = s->io_bits ? COMEDI_OUTPUT : COMEDI_INPUT;
+		return insn->n;
+	default:
+		return -EINVAL;
+	}
+	dt2801_writedata(dev, which);
+
+	return 1;
+}
+
 /*
    options:
 	[0] - i/o base
@@ -615,130 +693,19 @@ out:
 	return ret;
 }
 
-static int dt2801_detach(struct comedi_device *dev)
+static void dt2801_detach(struct comedi_device *dev)
 {
 	if (dev->iobase)
 		release_region(dev->iobase, DT2801_IOSIZE);
-
-	return 0;
-}
-
-static int dt2801_error(struct comedi_device *dev, int stat)
-{
-	if (stat < 0) {
-		if (stat == -ETIME)
-			printk("dt2801: timeout\n");
-		else
-			printk("dt2801: error %d\n", stat);
-		return stat;
-	}
-	printk("dt2801: error status 0x%02x, resetting...\n", stat);
-
-	dt2801_reset(dev);
-	dt2801_reset(dev);
-
-	return -EIO;
-}
-
-static int dt2801_ai_insn_read(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-	int d;
-	int stat;
-	int i;
-
-	for (i = 0; i < insn->n; i++) {
-		stat = dt2801_writecmd(dev, DT_C_READ_ADIM);
-		dt2801_writedata(dev, CR_RANGE(insn->chanspec));
-		dt2801_writedata(dev, CR_CHAN(insn->chanspec));
-		stat = dt2801_readdata2(dev, &d);
-
-		if (stat != 0)
-			return dt2801_error(dev, stat);
-
-		data[i] = d;
-	}
-
-	return i;
-}
-
-static int dt2801_ao_insn_read(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-	data[0] = devpriv->ao_readback[CR_CHAN(insn->chanspec)];
-
-	return 1;
-}
-
-static int dt2801_ao_insn_write(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
-{
-	dt2801_writecmd(dev, DT_C_WRITE_DAIM);
-	dt2801_writedata(dev, CR_CHAN(insn->chanspec));
-	dt2801_writedata2(dev, data[0]);
-
-	devpriv->ao_readback[CR_CHAN(insn->chanspec)] = data[0];
-
-	return 1;
-}
-
-static int dt2801_dio_insn_bits(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data)
-{
-	int which = 0;
-
-	if (s == dev->subdevices + 4)
-		which = 1;
-
-	if (insn->n != 2)
-		return -EINVAL;
-	if (data[0]) {
-		s->state &= ~data[0];
-		s->state |= (data[0] & data[1]);
-		dt2801_writecmd(dev, DT_C_WRITE_DIG);
-		dt2801_writedata(dev, which);
-		dt2801_writedata(dev, s->state);
-	}
-	dt2801_writecmd(dev, DT_C_READ_DIG);
-	dt2801_writedata(dev, which);
-	dt2801_readdata(dev, data + 1);
-
-	return 2;
 }
 
-static int dt2801_dio_insn_config(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data)
-{
-	int which = 0;
-
-	if (s == dev->subdevices + 4)
-		which = 1;
-
-	/* configure */
-	switch (data[0]) {
-	case INSN_CONFIG_DIO_OUTPUT:
-		s->io_bits = 0xff;
-		dt2801_writecmd(dev, DT_C_SET_DIGOUT);
-		break;
-	case INSN_CONFIG_DIO_INPUT:
-		s->io_bits = 0;
-		dt2801_writecmd(dev, DT_C_SET_DIGIN);
-		break;
-	case INSN_CONFIG_DIO_QUERY:
-		data[1] = s->io_bits ? COMEDI_OUTPUT : COMEDI_INPUT;
-		return insn->n;
-	default:
-		return -EINVAL;
-	}
-	dt2801_writedata(dev, which);
-
-	return 1;
-}
+static struct comedi_driver dt2801_driver = {
+	.driver_name	= "dt2801",
+	.module		= THIS_MODULE,
+	.attach		= dt2801_attach,
+	.detach		= dt2801_detach,
+};
+module_comedi_driver(dt2801_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c
index 0131d5225b52..106ffea30b95 100644
--- a/drivers/staging/comedi/drivers/dt2811.c
+++ b/drivers/staging/comedi/drivers/dt2811.c
@@ -211,61 +211,8 @@ struct dt2811_board {
 	const struct comedi_lrange *unip_5;
 };
 
-static const struct dt2811_board boardtypes[] = {
-	{"dt2811-pgh",
-	 &range_dt2811_pgh_ai_5_bipolar,
-	 &range_dt2811_pgh_ai_2_5_bipolar,
-	 &range_dt2811_pgh_ai_5_unipolar,
-	 },
-	{"dt2811-pgl",
-	 &range_dt2811_pgl_ai_5_bipolar,
-	 &range_dt2811_pgl_ai_2_5_bipolar,
-	 &range_dt2811_pgl_ai_5_unipolar,
-	 },
-};
-
 #define this_board ((const struct dt2811_board *)dev->board_ptr)
 
-static int dt2811_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int dt2811_detach(struct comedi_device *dev);
-static struct comedi_driver driver_dt2811 = {
-	.driver_name = "dt2811",
-	.module = THIS_MODULE,
-	.attach = dt2811_attach,
-	.detach = dt2811_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = ARRAY_SIZE(boardtypes),
-	.offset = sizeof(struct dt2811_board),
-};
-
-static int __init driver_dt2811_init_module(void)
-{
-	return comedi_driver_register(&driver_dt2811);
-}
-
-static void __exit driver_dt2811_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_dt2811);
-}
-
-module_init(driver_dt2811_init_module);
-module_exit(driver_dt2811_cleanup_module);
-
-static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data);
-static int dt2811_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data);
-static int dt2811_ao_insn_read(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int dt2811_di_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int dt2811_do_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-
 enum { card_2811_pgh, card_2811_pgl };
 
 struct dt2811_private {
@@ -317,6 +264,120 @@ static irqreturn_t dt2811_interrupt(int irq, void *d)
 }
 #endif
 
+static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+			  struct comedi_insn *insn, unsigned int *data)
+{
+	int chan = CR_CHAN(insn->chanspec);
+	int timeout = DT2811_TIMEOUT;
+	int i;
+
+	for (i = 0; i < insn->n; i++) {
+		outb(chan, dev->iobase + DT2811_ADGCR);
+
+		while (timeout
+		       && inb(dev->iobase + DT2811_ADCSR) & DT2811_ADBUSY)
+			timeout--;
+		if (!timeout)
+			return -ETIME;
+
+		data[i] = inb(dev->iobase + DT2811_ADDATLO);
+		data[i] |= inb(dev->iobase + DT2811_ADDATHI) << 8;
+		data[i] &= 0xfff;
+	}
+
+	return i;
+}
+
+#if 0
+/* Wow.  This is code from the Comedi stone age.  But it hasn't been
+ * replaced, so I'll let it stay. */
+int dt2811_adtrig(kdev_t minor, comedi_adtrig *adtrig)
+{
+	struct comedi_device *dev = comedi_devices + minor;
+
+	if (adtrig->n < 1)
+		return 0;
+	dev->curadchan = adtrig->chan;
+	switch (dev->i_admode) {
+	case COMEDI_MDEMAND:
+		dev->ntrig = adtrig->n - 1;
+		/* not necessary */
+		/*printk("dt2811: AD soft trigger\n"); */
+		/*outb(DT2811_CLRERROR|DT2811_INTENB,
+			dev->iobase+DT2811_ADCSR); */
+		outb(dev->curadchan, dev->iobase + DT2811_ADGCR);
+		do_gettimeofday(&trigtime);
+		break;
+	case COMEDI_MCONTS:
+		dev->ntrig = adtrig->n;
+		break;
+	}
+
+	return 0;
+}
+#endif
+
+static int dt2811_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
+			  struct comedi_insn *insn, unsigned int *data)
+{
+	int i;
+	int chan;
+
+	chan = CR_CHAN(insn->chanspec);
+
+	for (i = 0; i < insn->n; i++) {
+		outb(data[i] & 0xff, dev->iobase + DT2811_DADAT0LO + 2 * chan);
+		outb((data[i] >> 8) & 0xff,
+		     dev->iobase + DT2811_DADAT0HI + 2 * chan);
+		devpriv->ao_readback[chan] = data[i];
+	}
+
+	return i;
+}
+
+static int dt2811_ao_insn_read(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn, unsigned int *data)
+{
+	int i;
+	int chan;
+
+	chan = CR_CHAN(insn->chanspec);
+
+	for (i = 0; i < insn->n; i++)
+		data[i] = devpriv->ao_readback[chan];
+
+	return i;
+}
+
+static int dt2811_di_insn_bits(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn, unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
+
+	data[1] = inb(dev->iobase + DT2811_DIO);
+
+	return 2;
+}
+
+static int dt2811_do_insn_bits(struct comedi_device *dev,
+			       struct comedi_subdevice *s,
+			       struct comedi_insn *insn, unsigned int *data)
+{
+	if (insn->n != 2)
+		return -EINVAL;
+
+	s->state &= ~data[0];
+	s->state |= data[0] & data[1];
+	outb(s->state, dev->iobase + DT2811_DIO);
+
+	data[1] = s->state;
+
+	return 2;
+}
+
 /*
   options[0]   Board base address
   options[1]   IRQ
@@ -337,7 +398,6 @@ static irqreturn_t dt2811_interrupt(int irq, void *d)
 		 1 == bipolar 2.5V  (-2.5V -- +2.5V)
 		 2 == unipolar 5V  (0V -- +5V)
 */
-
 static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	/* int i, irq; */
@@ -511,131 +571,38 @@ static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int dt2811_detach(struct comedi_device *dev)
+static void dt2811_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: dt2811: remove\n", dev->minor);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if (dev->iobase)
 		release_region(dev->iobase, DT2811_SIZE);
-
-	return 0;
-}
-
-static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data)
-{
-	int chan = CR_CHAN(insn->chanspec);
-	int timeout = DT2811_TIMEOUT;
-	int i;
-
-	for (i = 0; i < insn->n; i++) {
-		outb(chan, dev->iobase + DT2811_ADGCR);
-
-		while (timeout
-		       && inb(dev->iobase + DT2811_ADCSR) & DT2811_ADBUSY)
-			timeout--;
-		if (!timeout)
-			return -ETIME;
-
-		data[i] = inb(dev->iobase + DT2811_ADDATLO);
-		data[i] |= inb(dev->iobase + DT2811_ADDATHI) << 8;
-		data[i] &= 0xfff;
-	}
-
-	return i;
 }
 
-#if 0
-/* Wow.  This is code from the Comedi stone age.  But it hasn't been
- * replaced, so I'll let it stay. */
-int dt2811_adtrig(kdev_t minor, comedi_adtrig *adtrig)
-{
-	struct comedi_device *dev = comedi_devices + minor;
-
-	if (adtrig->n < 1)
-		return 0;
-	dev->curadchan = adtrig->chan;
-	switch (dev->i_admode) {
-	case COMEDI_MDEMAND:
-		dev->ntrig = adtrig->n - 1;
-		/* not necessary */
-		/*printk("dt2811: AD soft trigger\n"); */
-		/*outb(DT2811_CLRERROR|DT2811_INTENB,
-			dev->iobase+DT2811_ADCSR); */
-		outb(dev->curadchan, dev->iobase + DT2811_ADGCR);
-		do_gettimeofday(&trigtime);
-		break;
-	case COMEDI_MCONTS:
-		dev->ntrig = adtrig->n;
-		break;
-	}
-
-	return 0;
-}
-#endif
-
-static int dt2811_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data)
-{
-	int i;
-	int chan;
-
-	chan = CR_CHAN(insn->chanspec);
-
-	for (i = 0; i < insn->n; i++) {
-		outb(data[i] & 0xff, dev->iobase + DT2811_DADAT0LO + 2 * chan);
-		outb((data[i] >> 8) & 0xff,
-		     dev->iobase + DT2811_DADAT0HI + 2 * chan);
-		devpriv->ao_readback[chan] = data[i];
-	}
-
-	return i;
-}
-
-static int dt2811_ao_insn_read(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-	int i;
-	int chan;
-
-	chan = CR_CHAN(insn->chanspec);
-
-	for (i = 0; i < insn->n; i++)
-		data[i] = devpriv->ao_readback[chan];
-
-	return i;
-}
-
-static int dt2811_di_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	data[1] = inb(dev->iobase + DT2811_DIO);
-
-	return 2;
-}
-
-static int dt2811_do_insn_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data)
-{
-	if (insn->n != 2)
-		return -EINVAL;
-
-	s->state &= ~data[0];
-	s->state |= data[0] & data[1];
-	outb(s->state, dev->iobase + DT2811_DIO);
-
-	data[1] = s->state;
+static const struct dt2811_board boardtypes[] = {
+	{
+		.name		= "dt2811-pgh",
+		.bip_5		= &range_dt2811_pgh_ai_5_bipolar,
+		.bip_2_5	= &range_dt2811_pgh_ai_2_5_bipolar,
+		.unip_5		= &range_dt2811_pgh_ai_5_unipolar,
+	}, {
+		.name		= "dt2811-pgl",
+		.bip_5		= &range_dt2811_pgl_ai_5_bipolar,
+		.bip_2_5	= &range_dt2811_pgl_ai_2_5_bipolar,
+		.unip_5		= &range_dt2811_pgl_ai_5_unipolar,
+	},
+};
 
-	return 2;
-}
+static struct comedi_driver dt2811_driver = {
+	.driver_name	= "dt2811",
+	.module		= THIS_MODULE,
+	.attach		= dt2811_attach,
+	.detach		= dt2811_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct dt2811_board),
+};
+module_comedi_driver(dt2811_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/dt2814.c b/drivers/staging/comedi/drivers/dt2814.c
index 1c6248cf5928..fa4ade61be5f 100644
--- a/drivers/staging/comedi/drivers/dt2814.c
+++ b/drivers/staging/comedi/drivers/dt2814.c
@@ -60,31 +60,6 @@ addition, the clock does not seem to be very accurate.
 #define DT2814_ENB 0x10
 #define DT2814_CHANMASK 0x0f
 
-static int dt2814_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int dt2814_detach(struct comedi_device *dev);
-static struct comedi_driver driver_dt2814 = {
-	.driver_name = "dt2814",
-	.module = THIS_MODULE,
-	.attach = dt2814_attach,
-	.detach = dt2814_detach,
-};
-
-static int __init driver_dt2814_init_module(void)
-{
-	return comedi_driver_register(&driver_dt2814);
-}
-
-static void __exit driver_dt2814_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_dt2814);
-}
-
-module_init(driver_dt2814_init_module);
-module_exit(driver_dt2814_cleanup_module);
-
-static irqreturn_t dt2814_interrupt(int irq, void *dev);
-
 struct dt2814_private {
 
 	int ntrig;
@@ -260,6 +235,45 @@ static int dt2814_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
 }
 
+static irqreturn_t dt2814_interrupt(int irq, void *d)
+{
+	int lo, hi;
+	struct comedi_device *dev = d;
+	struct comedi_subdevice *s;
+	int data;
+
+	if (!dev->attached) {
+		comedi_error(dev, "spurious interrupt");
+		return IRQ_HANDLED;
+	}
+
+	s = dev->subdevices + 0;
+
+	hi = inb(dev->iobase + DT2814_DATA);
+	lo = inb(dev->iobase + DT2814_DATA);
+
+	data = (hi << 4) | (lo >> 4);
+
+	if (!(--devpriv->ntrig)) {
+		int i;
+
+		outb(0, dev->iobase + DT2814_CSR);
+		/* note: turning off timed mode triggers another
+		   sample. */
+
+		for (i = 0; i < DT2814_TIMEOUT; i++) {
+			if (inb(dev->iobase + DT2814_CSR) & DT2814_FINISH)
+				break;
+		}
+		inb(dev->iobase + DT2814_DATA);
+		inb(dev->iobase + DT2814_DATA);
+
+		s->async->events |= COMEDI_CB_EOA;
+	}
+	comedi_event(dev, s);
+	return IRQ_HANDLED;
+}
+
 static int dt2814_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int i, irq;
@@ -347,57 +361,21 @@ static int dt2814_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int dt2814_detach(struct comedi_device *dev)
+static void dt2814_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: dt2814: remove\n", dev->minor);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (dev->iobase)
 		release_region(dev->iobase, DT2814_SIZE);
-
-	return 0;
 }
 
-static irqreturn_t dt2814_interrupt(int irq, void *d)
-{
-	int lo, hi;
-	struct comedi_device *dev = d;
-	struct comedi_subdevice *s;
-	int data;
-
-	if (!dev->attached) {
-		comedi_error(dev, "spurious interrupt");
-		return IRQ_HANDLED;
-	}
-
-	s = dev->subdevices + 0;
-
-	hi = inb(dev->iobase + DT2814_DATA);
-	lo = inb(dev->iobase + DT2814_DATA);
-
-	data = (hi << 4) | (lo >> 4);
-
-	if (!(--devpriv->ntrig)) {
-		int i;
-
-		outb(0, dev->iobase + DT2814_CSR);
-		/* note: turning off timed mode triggers another
-		   sample. */
-
-		for (i = 0; i < DT2814_TIMEOUT; i++) {
-			if (inb(dev->iobase + DT2814_CSR) & DT2814_FINISH)
-				break;
-		}
-		inb(dev->iobase + DT2814_DATA);
-		inb(dev->iobase + DT2814_DATA);
-
-		s->async->events |= COMEDI_CB_EOA;
-	}
-	comedi_event(dev, s);
-	return IRQ_HANDLED;
-}
+static struct comedi_driver dt2814_driver = {
+	.driver_name	= "dt2814",
+	.module		= THIS_MODULE,
+	.attach		= dt2814_attach,
+	.detach		= dt2814_detach,
+};
+module_comedi_driver(dt2814_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c
index 4155da43fd51..bbab712be4b9 100644
--- a/drivers/staging/comedi/drivers/dt2815.c
+++ b/drivers/staging/comedi/drivers/dt2815.c
@@ -72,31 +72,6 @@ static const struct comedi_lrange
 #define DT2815_DATA 0
 #define DT2815_STATUS 1
 
-static int dt2815_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int dt2815_detach(struct comedi_device *dev);
-static struct comedi_driver driver_dt2815 = {
-	.driver_name = "dt2815",
-	.module = THIS_MODULE,
-	.attach = dt2815_attach,
-	.detach = dt2815_detach,
-};
-
-static int __init driver_dt2815_init_module(void)
-{
-	return comedi_driver_register(&driver_dt2815);
-}
-
-static void __exit driver_dt2815_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_dt2815);
-}
-
-module_init(driver_dt2815_init_module);
-module_exit(driver_dt2815_cleanup_module);
-
-static void dt2815_free_resources(struct comedi_device *dev);
-
 struct dt2815_private {
 
 	const struct comedi_lrange *range_type_list[8];
@@ -252,20 +227,19 @@ static int dt2815_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static void dt2815_free_resources(struct comedi_device *dev)
+static void dt2815_detach(struct comedi_device *dev)
 {
 	if (dev->iobase)
 		release_region(dev->iobase, DT2815_SIZE);
 }
 
-static int dt2815_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: dt2815: remove\n", dev->minor);
-
-	dt2815_free_resources(dev);
-
-	return 0;
-}
+static struct comedi_driver dt2815_driver = {
+	.driver_name	= "dt2815",
+	.module		= THIS_MODULE,
+	.attach		= dt2815_attach,
+	.detach		= dt2815_detach,
+};
+module_comedi_driver(dt2815_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/dt2817.c b/drivers/staging/comedi/drivers/dt2817.c
index 99c1584153d7..1ee10e7bf1d2 100644
--- a/drivers/staging/comedi/drivers/dt2817.c
+++ b/drivers/staging/comedi/drivers/dt2817.c
@@ -47,29 +47,6 @@ Configuration options:
 #define DT2817_CR 0
 #define DT2817_DATA 1
 
-static int dt2817_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int dt2817_detach(struct comedi_device *dev);
-static struct comedi_driver driver_dt2817 = {
-	.driver_name = "dt2817",
-	.module = THIS_MODULE,
-	.attach = dt2817_attach,
-	.detach = dt2817_detach,
-};
-
-static int __init driver_dt2817_init_module(void)
-{
-	return comedi_driver_register(&driver_dt2817);
-}
-
-static void __exit driver_dt2817_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_dt2817);
-}
-
-module_init(driver_dt2817_init_module);
-module_exit(driver_dt2817_cleanup_module);
-
 static int dt2817_dio_insn_config(struct comedi_device *dev,
 				  struct comedi_subdevice *s,
 				  struct comedi_insn *insn, unsigned int *data)
@@ -182,16 +159,20 @@ static int dt2817_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int dt2817_detach(struct comedi_device *dev)
+static void dt2817_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: dt2817: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, DT2817_SIZE);
-
-	return 0;
 }
 
+static struct comedi_driver dt2817_driver = {
+	.driver_name	= "dt2817",
+	.module		= THIS_MODULE,
+	.attach		= dt2817_attach,
+	.detach		= dt2817_detach,
+};
+module_comedi_driver(dt2817_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 95ebc267bb74..736d8facaee8 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -221,136 +221,6 @@ struct dt282x_board {
 	int dabits;
 };
 
-static const struct dt282x_board boardtypes[] = {
-	{.name = "dt2821",
-	 .adbits = 12,
-	 .adchan_se = 16,
-	 .adchan_di = 8,
-	 .ai_speed = 20000,
-	 .ispgl = 0,
-	 .dachan = 2,
-	 .dabits = 12,
-	 },
-	{.name = "dt2821-f",
-	 .adbits = 12,
-	 .adchan_se = 16,
-	 .adchan_di = 8,
-	 .ai_speed = 6500,
-	 .ispgl = 0,
-	 .dachan = 2,
-	 .dabits = 12,
-	 },
-	{.name = "dt2821-g",
-	 .adbits = 12,
-	 .adchan_se = 16,
-	 .adchan_di = 8,
-	 .ai_speed = 4000,
-	 .ispgl = 0,
-	 .dachan = 2,
-	 .dabits = 12,
-	 },
-	{.name = "dt2823",
-	 .adbits = 16,
-	 .adchan_se = 0,
-	 .adchan_di = 4,
-	 .ai_speed = 10000,
-	 .ispgl = 0,
-	 .dachan = 2,
-	 .dabits = 16,
-	 },
-	{.name = "dt2824-pgh",
-	 .adbits = 12,
-	 .adchan_se = 16,
-	 .adchan_di = 8,
-	 .ai_speed = 20000,
-	 .ispgl = 0,
-	 .dachan = 0,
-	 .dabits = 0,
-	 },
-	{.name = "dt2824-pgl",
-	 .adbits = 12,
-	 .adchan_se = 16,
-	 .adchan_di = 8,
-	 .ai_speed = 20000,
-	 .ispgl = 1,
-	 .dachan = 0,
-	 .dabits = 0,
-	 },
-	{.name = "dt2825",
-	 .adbits = 12,
-	 .adchan_se = 16,
-	 .adchan_di = 8,
-	 .ai_speed = 20000,
-	 .ispgl = 1,
-	 .dachan = 2,
-	 .dabits = 12,
-	 },
-	{.name = "dt2827",
-	 .adbits = 16,
-	 .adchan_se = 0,
-	 .adchan_di = 4,
-	 .ai_speed = 10000,
-	 .ispgl = 0,
-	 .dachan = 2,
-	 .dabits = 12,
-	 },
-	{.name = "dt2828",
-	 .adbits = 12,
-	 .adchan_se = 4,
-	 .adchan_di = 0,
-	 .ai_speed = 10000,
-	 .ispgl = 0,
-	 .dachan = 2,
-	 .dabits = 12,
-	 },
-	{.name = "dt2829",
-	 .adbits = 16,
-	 .adchan_se = 8,
-	 .adchan_di = 0,
-	 .ai_speed = 33250,
-	 .ispgl = 0,
-	 .dachan = 2,
-	 .dabits = 16,
-	 },
-	{.name = "dt21-ez",
-	 .adbits = 12,
-	 .adchan_se = 16,
-	 .adchan_di = 8,
-	 .ai_speed = 10000,
-	 .ispgl = 0,
-	 .dachan = 2,
-	 .dabits = 12,
-	 },
-	{.name = "dt23-ez",
-	 .adbits = 16,
-	 .adchan_se = 16,
-	 .adchan_di = 8,
-	 .ai_speed = 10000,
-	 .ispgl = 0,
-	 .dachan = 0,
-	 .dabits = 0,
-	 },
-	{.name = "dt24-ez",
-	 .adbits = 12,
-	 .adchan_se = 16,
-	 .adchan_di = 8,
-	 .ai_speed = 10000,
-	 .ispgl = 0,
-	 .dachan = 0,
-	 .dabits = 0,
-	 },
-	{.name = "dt24-ez-pgl",
-	 .adbits = 12,
-	 .adchan_se = 16,
-	 .adchan_di = 8,
-	 .ai_speed = 10000,
-	 .ispgl = 1,
-	 .dachan = 0,
-	 .dabits = 0,
-	 },
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct dt282x_board))
 #define this_board ((const struct dt282x_board *)dev->board_ptr)
 
 struct dt282x_private {
@@ -411,33 +281,6 @@ struct dt282x_private {
 			b					\
 	} while (0)
 
-static int dt282x_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int dt282x_detach(struct comedi_device *dev);
-static struct comedi_driver driver_dt282x = {
-	.driver_name = "dt282x",
-	.module = THIS_MODULE,
-	.attach = dt282x_attach,
-	.detach = dt282x_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct dt282x_board),
-};
-
-static int __init driver_dt282x_init_module(void)
-{
-	return comedi_driver_register(&driver_dt282x);
-}
-
-static void __exit driver_dt282x_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_dt282x);
-}
-
-module_init(driver_dt282x_init_module);
-module_exit(driver_dt282x_cleanup_module);
-
-static void free_resources(struct comedi_device *dev);
 static int prep_ai_dma(struct comedi_device *dev, int chan, int size);
 static int prep_ao_dma(struct comedi_device *dev, int chan, int size);
 static int dt282x_ai_cancel(struct comedi_device *dev,
@@ -1271,6 +1114,52 @@ enum {  /* i/o base, irq, dma channels */
 	opt_ai_range, opt_ao0_range, opt_ao1_range,	/* range */
 };
 
+static int dt282x_grab_dma(struct comedi_device *dev, int dma1, int dma2)
+{
+	int ret;
+
+	devpriv->usedma = 0;
+
+	if (!dma1 && !dma2) {
+		printk(KERN_ERR " (no dma)");
+		return 0;
+	}
+
+	if (dma1 == dma2 || dma1 < 5 || dma2 < 5 || dma1 > 7 || dma2 > 7)
+		return -EINVAL;
+
+	if (dma2 < dma1) {
+		int i;
+		i = dma1;
+		dma1 = dma2;
+		dma2 = i;
+	}
+
+	ret = request_dma(dma1, "dt282x A");
+	if (ret)
+		return -EBUSY;
+	devpriv->dma[0].chan = dma1;
+
+	ret = request_dma(dma2, "dt282x B");
+	if (ret)
+		return -EBUSY;
+	devpriv->dma[1].chan = dma2;
+
+	devpriv->dma_maxsize = PAGE_SIZE;
+	devpriv->dma[0].buf = (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
+	devpriv->dma[1].buf = (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
+	if (!devpriv->dma[0].buf || !devpriv->dma[1].buf) {
+		printk(KERN_ERR " can't get DMA memory");
+		return -ENOMEM;
+	}
+
+	printk(KERN_INFO " (dma=%d,%d)", dma1, dma2);
+
+	devpriv->usedma = 1;
+
+	return 0;
+}
+
 /*
    options:
    0	i/o base
@@ -1442,7 +1331,7 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static void free_resources(struct comedi_device *dev)
+static void dt282x_detach(struct comedi_device *dev)
 {
 	if (dev->irq)
 		free_irq(dev->irq, dev);
@@ -1460,60 +1349,146 @@ static void free_resources(struct comedi_device *dev)
 	}
 }
 
-static int dt282x_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: dt282x: remove\n", dev->minor);
-
-	free_resources(dev);
-
-	return 0;
-}
-
-static int dt282x_grab_dma(struct comedi_device *dev, int dma1, int dma2)
-{
-	int ret;
-
-	devpriv->usedma = 0;
-
-	if (!dma1 && !dma2) {
-		printk(KERN_ERR " (no dma)");
-		return 0;
-	}
-
-	if (dma1 == dma2 || dma1 < 5 || dma2 < 5 || dma1 > 7 || dma2 > 7)
-		return -EINVAL;
-
-	if (dma2 < dma1) {
-		int i;
-		i = dma1;
-		dma1 = dma2;
-		dma2 = i;
-	}
-
-	ret = request_dma(dma1, "dt282x A");
-	if (ret)
-		return -EBUSY;
-	devpriv->dma[0].chan = dma1;
-
-	ret = request_dma(dma2, "dt282x B");
-	if (ret)
-		return -EBUSY;
-	devpriv->dma[1].chan = dma2;
-
-	devpriv->dma_maxsize = PAGE_SIZE;
-	devpriv->dma[0].buf = (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
-	devpriv->dma[1].buf = (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
-	if (!devpriv->dma[0].buf || !devpriv->dma[1].buf) {
-		printk(KERN_ERR " can't get DMA memory");
-		return -ENOMEM;
-	}
-
-	printk(KERN_INFO " (dma=%d,%d)", dma1, dma2);
-
-	devpriv->usedma = 1;
+static const struct dt282x_board boardtypes[] = {
+	{
+		.name		= "dt2821",
+		.adbits		= 12,
+		.adchan_se	= 16,
+		.adchan_di	= 8,
+		.ai_speed	= 20000,
+		.ispgl		= 0,
+		.dachan		= 2,
+		.dabits		= 12,
+	}, {
+		.name		= "dt2821-f",
+		.adbits		= 12,
+		.adchan_se	= 16,
+		.adchan_di	= 8,
+		.ai_speed	= 6500,
+		.ispgl		= 0,
+		.dachan		= 2,
+		.dabits		= 12,
+	}, {
+		.name		= "dt2821-g",
+		.adbits		= 12,
+		.adchan_se	= 16,
+		.adchan_di	= 8,
+		.ai_speed	= 4000,
+		.ispgl		= 0,
+		.dachan		= 2,
+		.dabits		= 12,
+	}, {
+		.name		= "dt2823",
+		.adbits		= 16,
+		.adchan_se	= 0,
+		.adchan_di	= 4,
+		.ai_speed	= 10000,
+		.ispgl		= 0,
+		.dachan		= 2,
+		.dabits		= 16,
+	}, {
+		.name		= "dt2824-pgh",
+		.adbits		= 12,
+		.adchan_se	= 16,
+		.adchan_di	= 8,
+		.ai_speed	= 20000,
+		.ispgl		= 0,
+		.dachan		= 0,
+		.dabits		= 0,
+	}, {
+		.name		= "dt2824-pgl",
+		.adbits		= 12,
+		.adchan_se	= 16,
+		.adchan_di	= 8,
+		.ai_speed	= 20000,
+		.ispgl		= 1,
+		.dachan		= 0,
+		.dabits		= 0,
+	}, {
+		.name		= "dt2825",
+		.adbits		= 12,
+		.adchan_se	= 16,
+		.adchan_di	= 8,
+		.ai_speed	= 20000,
+		.ispgl		= 1,
+		.dachan		= 2,
+		.dabits		= 12,
+	}, {
+		.name		= "dt2827",
+		.adbits		= 16,
+		.adchan_se	= 0,
+		.adchan_di	= 4,
+		.ai_speed	= 10000,
+		.ispgl		= 0,
+		.dachan		= 2,
+		.dabits		= 12,
+	}, {
+		.name		= "dt2828",
+		.adbits		= 12,
+		.adchan_se	= 4,
+		.adchan_di	= 0,
+		.ai_speed	= 10000,
+		.ispgl		= 0,
+		.dachan		= 2,
+		.dabits		= 12,
+	}, {
+		.name		= "dt2829",
+		.adbits		= 16,
+		.adchan_se	= 8,
+		.adchan_di	= 0,
+		.ai_speed	= 33250,
+		.ispgl		= 0,
+		.dachan		= 2,
+		.dabits		= 16,
+	}, {
+		.name		= "dt21-ez",
+		.adbits		= 12,
+		.adchan_se	= 16,
+		.adchan_di	= 8,
+		.ai_speed	= 10000,
+		.ispgl		= 0,
+		.dachan		= 2,
+		.dabits		= 12,
+	}, {
+		.name		= "dt23-ez",
+		.adbits		= 16,
+		.adchan_se	= 16,
+		.adchan_di	= 8,
+		.ai_speed	= 10000,
+		.ispgl		= 0,
+		.dachan		= 0,
+		.dabits		= 0,
+	}, {
+		.name		= "dt24-ez",
+		.adbits		= 12,
+		.adchan_se	= 16,
+		.adchan_di	= 8,
+		.ai_speed	= 10000,
+		.ispgl		= 0,
+		.dachan		= 0,
+		.dabits		= 0,
+	}, {
+		.name		= "dt24-ez-pgl",
+		.adbits		= 12,
+		.adchan_se	= 16,
+		.adchan_di	= 8,
+		.ai_speed	= 10000,
+		.ispgl		= 1,
+		.dachan		= 0,
+		.dabits		= 0,
+	},
+};
 
-	return 0;
-}
+static struct comedi_driver dt282x_driver = {
+	.driver_name	= "dt282x",
+	.module		= THIS_MODULE,
+	.attach		= dt282x_attach,
+	.detach		= dt282x_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct dt282x_board),
+};
+module_comedi_driver(dt282x_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c
index 0a7979e52999..0d273269b572 100644
--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -164,19 +164,6 @@ static const struct dt3k_boardtype dt3k_boardtypes[] = {
 #define n_dt3k_boards sizeof(dt3k_boardtypes)/sizeof(struct dt3k_boardtype)
 #define this_board ((const struct dt3k_boardtype *)dev->board_ptr)
 
-static DEFINE_PCI_DEVICE_TABLE(dt3k_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0022) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0027) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0023) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0024) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0028) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0025) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0026) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, dt3k_pci_table);
-
 #define DT3000_SIZE		(4*0x1000)
 
 /* dual-ported RAM location definitions */
@@ -276,54 +263,6 @@ struct dt3k_private {
 
 #define devpriv ((struct dt3k_private *)dev->private)
 
-static int dt3000_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int dt3000_detach(struct comedi_device *dev);
-static struct comedi_driver driver_dt3000 = {
-	.driver_name = "dt3000",
-	.module = THIS_MODULE,
-	.attach = dt3000_attach,
-	.detach = dt3000_detach,
-};
-
-static int __devinit driver_dt3000_pci_probe(struct pci_dev *dev,
-					     const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, driver_dt3000.driver_name);
-}
-
-static void __devexit driver_dt3000_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_dt3000_pci_driver = {
-	.id_table = dt3k_pci_table,
-	.probe = &driver_dt3000_pci_probe,
-	.remove = __devexit_p(&driver_dt3000_pci_remove)
-};
-
-static int __init driver_dt3000_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_dt3000);
-	if (retval < 0)
-		return retval;
-
-	driver_dt3000_pci_driver.name = (char *)driver_dt3000.driver_name;
-	return pci_register_driver(&driver_dt3000_pci_driver);
-}
-
-static void __exit driver_dt3000_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_dt3000_pci_driver);
-	comedi_driver_unregister(&driver_dt3000);
-}
-
-module_init(driver_dt3000_init_module);
-module_exit(driver_dt3000_cleanup_module);
-
 static void dt3k_ai_empty_fifo(struct comedi_device *dev,
 			       struct comedi_subdevice *s);
 static int dt3k_ns_to_timer(unsigned int timer_base, unsigned int *arg,
@@ -841,7 +780,77 @@ static int dt3k_mem_insn_read(struct comedi_device *dev,
 	return i;
 }
 
-static int dt_pci_probe(struct comedi_device *dev, int bus, int slot);
+static int setup_pci(struct comedi_device *dev)
+{
+	resource_size_t addr;
+	int ret;
+
+	ret = comedi_pci_enable(devpriv->pci_dev, "dt3000");
+	if (ret < 0)
+		return ret;
+
+	addr = pci_resource_start(devpriv->pci_dev, 0);
+	devpriv->phys_addr = addr;
+	devpriv->io_addr = ioremap(devpriv->phys_addr, DT3000_SIZE);
+	if (!devpriv->io_addr)
+		return -ENOMEM;
+#if DEBUG
+	printk("0x%08llx mapped to %p, ",
+	       (unsigned long long)devpriv->phys_addr, devpriv->io_addr);
+#endif
+
+	return 0;
+}
+
+static struct pci_dev *dt_pci_find_device(struct pci_dev *from, int *board)
+{
+	int i;
+
+	for (from = pci_get_device(PCI_VENDOR_ID_DT, PCI_ANY_ID, from);
+	     from != NULL;
+	     from = pci_get_device(PCI_VENDOR_ID_DT, PCI_ANY_ID, from)) {
+		for (i = 0; i < n_dt3k_boards; i++) {
+			if (from->device == dt3k_boardtypes[i].device_id) {
+				*board = i;
+				return from;
+			}
+		}
+		printk
+		    ("unknown Data Translation PCI device found with device_id=0x%04x\n",
+		     from->device);
+	}
+	*board = -1;
+	return from;
+}
+
+static int dt_pci_probe(struct comedi_device *dev, int bus, int slot)
+{
+	int board;
+	int ret;
+	struct pci_dev *pcidev;
+
+	pcidev = NULL;
+	while ((pcidev = dt_pci_find_device(pcidev, &board)) != NULL) {
+		if ((bus == 0 && slot == 0) ||
+		    (pcidev->bus->number == bus &&
+		     PCI_SLOT(pcidev->devfn) == slot)) {
+			break;
+		}
+	}
+	devpriv->pci_dev = pcidev;
+
+	if (board >= 0)
+		dev->board_ptr = dt3k_boardtypes + board;
+
+	if (!devpriv->pci_dev)
+		return 0;
+
+	ret = setup_pci(dev);
+	if (ret < 0)
+		return ret;
+
+	return 1;
+}
 
 static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
@@ -935,11 +944,10 @@ static int dt3000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int dt3000_detach(struct comedi_device *dev)
+static void dt3000_detach(struct comedi_device *dev)
 {
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (devpriv) {
 		if (devpriv->pci_dev) {
 			if (devpriv->phys_addr)
@@ -949,85 +957,45 @@ static int dt3000_detach(struct comedi_device *dev)
 		if (devpriv->io_addr)
 			iounmap(devpriv->io_addr);
 	}
-	/* XXX */
-
-	return 0;
 }
 
-static struct pci_dev *dt_pci_find_device(struct pci_dev *from, int *board);
-static int setup_pci(struct comedi_device *dev);
+static struct comedi_driver dt3000_driver = {
+	.driver_name	= "dt3000",
+	.module		= THIS_MODULE,
+	.attach		= dt3000_attach,
+	.detach		= dt3000_detach,
+};
 
-static int dt_pci_probe(struct comedi_device *dev, int bus, int slot)
+static int __devinit dt3000_pci_probe(struct pci_dev *dev,
+				      const struct pci_device_id *ent)
 {
-	int board;
-	int ret;
-	struct pci_dev *pcidev;
-
-	pcidev = NULL;
-	while ((pcidev = dt_pci_find_device(pcidev, &board)) != NULL) {
-		if ((bus == 0 && slot == 0) ||
-		    (pcidev->bus->number == bus &&
-		     PCI_SLOT(pcidev->devfn) == slot)) {
-			break;
-		}
-	}
-	devpriv->pci_dev = pcidev;
-
-	if (board >= 0)
-		dev->board_ptr = dt3k_boardtypes + board;
-
-	if (!devpriv->pci_dev)
-		return 0;
-
-	ret = setup_pci(dev);
-	if (ret < 0)
-		return ret;
-
-	return 1;
+	return comedi_pci_auto_config(dev, &dt3000_driver);
 }
 
-static int setup_pci(struct comedi_device *dev)
+static void __devexit dt3000_pci_remove(struct pci_dev *dev)
 {
-	resource_size_t addr;
-	int ret;
-
-	ret = comedi_pci_enable(devpriv->pci_dev, "dt3000");
-	if (ret < 0)
-		return ret;
-
-	addr = pci_resource_start(devpriv->pci_dev, 0);
-	devpriv->phys_addr = addr;
-	devpriv->io_addr = ioremap(devpriv->phys_addr, DT3000_SIZE);
-	if (!devpriv->io_addr)
-		return -ENOMEM;
-#if DEBUG
-	printk("0x%08llx mapped to %p, ",
-	       (unsigned long long)devpriv->phys_addr, devpriv->io_addr);
-#endif
-
-	return 0;
+	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_dev *dt_pci_find_device(struct pci_dev *from, int *board)
-{
-	int i;
+static DEFINE_PCI_DEVICE_TABLE(dt3000_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0022) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0027) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0023) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0024) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0028) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0025) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DT, 0x0026) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, dt3000_pci_table);
 
-	for (from = pci_get_device(PCI_VENDOR_ID_DT, PCI_ANY_ID, from);
-	     from != NULL;
-	     from = pci_get_device(PCI_VENDOR_ID_DT, PCI_ANY_ID, from)) {
-		for (i = 0; i < n_dt3k_boards; i++) {
-			if (from->device == dt3k_boardtypes[i].device_id) {
-				*board = i;
-				return from;
-			}
-		}
-		printk
-		    ("unknown Data Translation PCI device found with device_id=0x%04x\n",
-		     from->device);
-	}
-	*board = -1;
-	return from;
-}
+static struct pci_driver dt3000_pci_driver = {
+	.name		= "dt3000",
+	.id_table	= dt3000_pci_table,
+	.probe		= dt3000_pci_probe,
+	.remove		= __devexit_p(dt3000_pci_remove),
+};
+module_comedi_pci_driver(dt3000_driver, dt3000_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index e86ab5862895..22cda5c76ce4 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -196,7 +196,7 @@ struct dt9812_flash_data {
 };
 
 #define DT9812_MAX_NUM_MULTI_BYTE_RDS  \
-    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8))
+	((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(u8))
 
 struct dt9812_read_multi {
 	u8 count;
@@ -209,8 +209,8 @@ struct dt9812_write_byte {
 };
 
 #define DT9812_MAX_NUM_MULTI_BYTE_WRTS  \
-    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / \
-      sizeof(struct dt9812_write_byte))
+	((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / \
+	 sizeof(struct dt9812_write_byte))
 
 struct dt9812_write_multi {
 	u8 count;
@@ -224,7 +224,8 @@ struct dt9812_rmw_byte {
 };
 
 #define DT9812_MAX_NUM_MULTI_BYTE_RMWS  \
-    ((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / sizeof(struct dt9812_rmw_byte))
+	((DT9812_MAX_WRITE_CMD_PIPE_SIZE - 4 - 1) / \
+	 sizeof(struct dt9812_rmw_byte))
 
 struct dt9812_rmw_multi {
 	u8 count;
@@ -365,7 +366,7 @@ static int dt9812_read_info(struct usb_dt9812 *dev, int offset, void *buf,
 }
 
 static int dt9812_read_multiple_registers(struct usb_dt9812 *dev, int reg_count,
-					  u8 * address, u8 * value)
+					  u8 *address, u8 *value)
 {
 	struct dt9812_usb_cmd cmd;
 	int i, count, retval;
@@ -391,8 +392,8 @@ static int dt9812_read_multiple_registers(struct usb_dt9812 *dev, int reg_count,
 }
 
 static int dt9812_write_multiple_registers(struct usb_dt9812 *dev,
-					   int reg_count, u8 * address,
-					   u8 * value)
+					   int reg_count, u8 *address,
+					   u8 *value)
 {
 	struct dt9812_usb_cmd cmd;
 	int i, count, retval;
@@ -430,7 +431,7 @@ static int dt9812_rmw_multiple_registers(struct usb_dt9812 *dev, int reg_count,
 	return retval;
 }
 
-static int dt9812_digital_in(struct slot_dt9812 *slot, u8 * bits)
+static int dt9812_digital_in(struct slot_dt9812 *slot, u8 *bits)
 {
 	int result = -ENODEV;
 
@@ -476,7 +477,7 @@ static int dt9812_digital_out(struct slot_dt9812 *slot, u8 bits)
 	return result;
 }
 
-static int dt9812_digital_out_shadow(struct slot_dt9812 *slot, u8 * bits)
+static int dt9812_digital_out_shadow(struct slot_dt9812 *slot, u8 *bits)
 {
 	int result = -ENODEV;
 
@@ -547,12 +548,12 @@ static void dt9812_configure_gain(struct usb_dt9812 *dev,
 		rmw->or_value = F020_MASK_ADC0CF_AMP0GN2;
 		break;
 	default:
-		err("Illegal gain %d\n", gain);
+		dev_err(&dev->interface->dev, "Illegal gain %d\n", gain);
 
 	}
 }
 
-static int dt9812_analog_in(struct slot_dt9812 *slot, int channel, u16 * value,
+static int dt9812_analog_in(struct slot_dt9812 *slot, int channel, u16 *value,
 			    enum dt9812_gain gain)
 {
 	struct dt9812_rmw_byte rmw[3];
@@ -619,7 +620,7 @@ exit:
 }
 
 static int dt9812_analog_out_shadow(struct slot_dt9812 *slot, int channel,
-				    u16 * value)
+				    u16 *value)
 {
 	int result = -ENODEV;
 
@@ -715,7 +716,7 @@ static int dt9812_probe(struct usb_interface *interface,
 	iface_desc = interface->cur_altsetting;
 
 	if (iface_desc->desc.bNumEndpoints != 5) {
-		err("Wrong number of endpints.");
+		dev_err(&interface->dev, "Wrong number of endpoints.\n");
 		retval = -ENODEV;
 		goto error;
 	}
@@ -781,22 +782,22 @@ static int dt9812_probe(struct usb_interface *interface,
 	}
 
 	if (dt9812_read_info(dev, 1, &dev->vendor, sizeof(dev->vendor)) != 0) {
-		err("Failed to read vendor.");
+		dev_err(&interface->dev, "Failed to read vendor.\n");
 		retval = -ENODEV;
 		goto error;
 	}
 	if (dt9812_read_info(dev, 3, &dev->product, sizeof(dev->product)) != 0) {
-		err("Failed to read product.");
+		dev_err(&interface->dev, "Failed to read product.\n");
 		retval = -ENODEV;
 		goto error;
 	}
 	if (dt9812_read_info(dev, 5, &dev->device, sizeof(dev->device)) != 0) {
-		err("Failed to read device.");
+		dev_err(&interface->dev, "Failed to read device.\n");
 		retval = -ENODEV;
 		goto error;
 	}
 	if (dt9812_read_info(dev, 7, &dev->serial, sizeof(dev->serial)) != 0) {
-		err("Failed to read serial.");
+		dev_err(&interface->dev, "Failed to read serial.\n");
 		retval = -ENODEV;
 		goto error;
 	}
@@ -1110,9 +1111,9 @@ static int dt9812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int dt9812_detach(struct comedi_device *dev)
+static void dt9812_detach(struct comedi_device *dev)
 {
-	return 0;
+	/* Nothing to cleanup */
 }
 
 static struct comedi_driver dt9812_comedi_driver = {
@@ -1146,7 +1147,9 @@ static int __init usb_dt9812_init(void)
 	result = comedi_driver_register(&dt9812_comedi_driver);
 	if (result) {
 		usb_deregister(&dt9812_usb_driver);
-		err("comedi_driver_register failed. Error number %d", result);
+		printk(KERN_ERR KBUILD_MODNAME
+			": comedi_driver_register failed. Error number %d\n",
+			result);
 	}
 
 	return result;
diff --git a/drivers/staging/comedi/drivers/dyna_pci10xx.c b/drivers/staging/comedi/drivers/dyna_pci10xx.c
index da8a2bf31657..b0cec7b1b0c9 100644
--- a/drivers/staging/comedi/drivers/dyna_pci10xx.c
+++ b/drivers/staging/comedi/drivers/dyna_pci10xx.c
@@ -48,17 +48,6 @@
 
 static DEFINE_MUTEX(start_stop_sem);
 
-static DEFINE_PCI_DEVICE_TABLE(dyna_pci10xx_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_DYNALOG, 0x1050) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, dyna_pci10xx_pci_table);
-
-static int dyna_pci10xx_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int dyna_pci10xx_detach(struct comedi_device *dev);
-
 static const struct comedi_lrange range_pci1050_ai = { 3, {
 							  BIP_RANGE(10),
 							  BIP_RANGE(5),
@@ -113,16 +102,6 @@ static const struct boardtype boardtypes[] = {
 	{.name = DRV_NAME},
 };
 
-static struct comedi_driver driver_dyna_pci10xx = {
-	.driver_name = DRV_NAME,
-	.module = THIS_MODULE,
-	.attach = dyna_pci10xx_attach,
-	.detach = dyna_pci10xx_detach,
-	.board_name = &boardtypes[0].name,
-	.offset = sizeof(struct boardtype),
-	.num_names = ARRAY_SIZE(boardtypes),
-};
-
 struct dyna_pci10xx_private {
 	struct pci_dev *pci_dev;	/*  ptr to PCI device */
 	char valid;			/*  card is usable */
@@ -408,54 +387,48 @@ found:
 	return 1;
 }
 
-static int dyna_pci10xx_detach(struct comedi_device *dev)
+static void dyna_pci10xx_detach(struct comedi_device *dev)
 {
 	if (devpriv && devpriv->pci_dev) {
 		comedi_pci_disable(devpriv->pci_dev);
 		mutex_destroy(&devpriv->mutex);
 	}
-
-	return 0;
 }
 
-static int __devinit driver_dyna_pci10xx_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
+static struct comedi_driver dyna_pci10xx_driver = {
+	.driver_name	= "dyna_pci10xx",
+	.module		= THIS_MODULE,
+	.attach		= dyna_pci10xx_attach,
+	.detach		= dyna_pci10xx_detach,
+	.board_name	= &boardtypes[0].name,
+	.offset		= sizeof(struct boardtype),
+	.num_names	= ARRAY_SIZE(boardtypes),
+};
+
+static int __devinit dyna_pci10xx_pci_probe(struct pci_dev *dev,
+					    const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_dyna_pci10xx.driver_name);
+	return comedi_pci_auto_config(dev, &dyna_pci10xx_driver);
 }
 
-static void __devexit driver_dyna_pci10xx_pci_remove(struct pci_dev *dev)
+static void __devexit dyna_pci10xx_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_dyna_pci10xx_pci_driver = {
-	.id_table = dyna_pci10xx_pci_table,
-	.probe = &driver_dyna_pci10xx_pci_probe,
-	.remove = __devexit_p(&driver_dyna_pci10xx_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(dyna_pci10xx_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_DYNALOG, 0x1050) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, dyna_pci10xx_pci_table);
 
-static int __init driver_dyna_pci10xx_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_dyna_pci10xx);
-	if (retval < 0)
-		return retval;
-
-	driver_dyna_pci10xx_pci_driver.name =
-		(char *)driver_dyna_pci10xx.driver_name;
-	return pci_register_driver(&driver_dyna_pci10xx_pci_driver);
-}
-
-static void __exit driver_dyna_pci10xx_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_dyna_pci10xx_pci_driver);
-	comedi_driver_unregister(&driver_dyna_pci10xx);
-}
-
-module_init(driver_dyna_pci10xx_init_module);
-module_exit(driver_dyna_pci10xx_cleanup_module);
+static struct pci_driver dyna_pci10xx_pci_driver = {
+	.name		= "dyna_pci10xx",
+	.id_table	= dyna_pci10xx_pci_table,
+	.probe		= dyna_pci10xx_pci_probe,
+	.remove		= __devexit_p(dyna_pci10xx_pci_remove),
+};
+module_comedi_pci_driver(dyna_pci10xx_driver, dyna_pci10xx_pci_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Prashant Shah <pshah.mumbai@gmail.com>");
diff --git a/drivers/staging/comedi/drivers/fl512.c b/drivers/staging/comedi/drivers/fl512.c
index 7f49add60b21..d23814450b40 100644
--- a/drivers/staging/comedi/drivers/fl512.c
+++ b/drivers/staging/comedi/drivers/fl512.c
@@ -42,38 +42,6 @@ static const struct comedi_lrange range_fl512 = { 4, {
 						      }
 };
 
-static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int fl512_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_fl512 = {
-	.driver_name = "fl512",
-	.module = THIS_MODULE,
-	.attach = fl512_attach,
-	.detach = fl512_detach,
-};
-
-static int __init driver_fl512_init_module(void)
-{
-	return comedi_driver_register(&driver_fl512);
-}
-
-static void __exit driver_fl512_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_fl512);
-}
-
-module_init(driver_fl512_init_module);
-module_exit(driver_fl512_cleanup_module);
-
-static int fl512_ai_insn(struct comedi_device *dev,
-			 struct comedi_subdevice *s, struct comedi_insn *insn,
-			 unsigned int *data);
-static int fl512_ao_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-static int fl512_ao_insn_readback(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data);
-
 /*
  * fl512_ai_insn : this is the analog input function
  */
@@ -140,9 +108,6 @@ static int fl512_ao_insn_readback(struct comedi_device *dev,
 	return n;
 }
 
-/*
- * start attach
- */
 static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	unsigned long iobase;
@@ -209,14 +174,20 @@ static int fl512_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }
 
-static int fl512_detach(struct comedi_device *dev)
+static void fl512_detach(struct comedi_device *dev)
 {
 	if (dev->iobase)
 		release_region(dev->iobase, FL512_SIZE);
-	printk(KERN_INFO "comedi%d: fl512: dummy i detach\n", dev->minor);
-	return 0;
 }
 
+static struct comedi_driver fl512_driver = {
+	.driver_name	= "fl512",
+	.module		= THIS_MODULE,
+	.attach		= fl512_attach,
+	.detach		= fl512_detach,
+};
+module_comedi_driver(fl512_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index bc020dea141b..8aece08bd0dd 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -53,8 +53,6 @@ support could be added to this driver.
 #include "plx9080.h"
 #include "comedi_fc.h"
 
-static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int hpdi_detach(struct comedi_device *dev);
 static void abort_dma(struct comedi_device *dev, unsigned int channel);
 static int hpdi_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
 static int hpdi_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -287,15 +285,6 @@ static const struct hpdi_board hpdi_boards[] = {
 #endif
 };
 
-static DEFINE_PCI_DEVICE_TABLE(hpdi_pci_table) = {
-	{
-	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9080, PCI_VENDOR_ID_PLX,
-		    0x2400, 0, 0, 0}, {
-	0}
-};
-
-MODULE_DEVICE_TABLE(pci, hpdi_pci_table);
-
 static inline struct hpdi_board *board(const struct comedi_device *dev)
 {
 	return (struct hpdi_board *)dev->board_ptr;
@@ -338,51 +327,6 @@ static inline struct hpdi_private *priv(struct comedi_device *dev)
 	return dev->private;
 }
 
-static struct comedi_driver driver_hpdi = {
-	.driver_name = "gsc_hpdi",
-	.module = THIS_MODULE,
-	.attach = hpdi_attach,
-	.detach = hpdi_detach,
-};
-
-static int __devinit driver_hpdi_pci_probe(struct pci_dev *dev,
-					   const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, driver_hpdi.driver_name);
-}
-
-static void __devexit driver_hpdi_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_hpdi_pci_driver = {
-	.id_table = hpdi_pci_table,
-	.probe = &driver_hpdi_pci_probe,
-	.remove = __devexit_p(&driver_hpdi_pci_remove)
-};
-
-static int __init driver_hpdi_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_hpdi);
-	if (retval < 0)
-		return retval;
-
-	driver_hpdi_pci_driver.name = (char *)driver_hpdi.driver_name;
-	return pci_register_driver(&driver_hpdi_pci_driver);
-}
-
-static void __exit driver_hpdi_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_hpdi_pci_driver);
-	comedi_driver_unregister(&driver_hpdi);
-}
-
-module_init(driver_hpdi_init_module);
-module_exit(driver_hpdi_cleanup_module);
-
 static int dio_config_insn(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_insn *insn,
 			   unsigned int *data)
@@ -645,7 +589,7 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	       "gsc_hpdi: found %s on bus %i, slot %i\n", board(dev)->name,
 	       pcidev->bus->number, PCI_SLOT(pcidev->devfn));
 
-	if (comedi_pci_enable(pcidev, driver_hpdi.driver_name)) {
+	if (comedi_pci_enable(pcidev, dev->driver->driver_name)) {
 		printk(KERN_WARNING
 		       " failed enable PCI device and request regions\n");
 		return -EIO;
@@ -679,7 +623,7 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	/*  get irq */
 	if (request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
-			driver_hpdi.driver_name, dev)) {
+			dev->driver->driver_name, dev)) {
 		printk(KERN_WARNING
 		       " unable to allocate irq %u\n", pcidev->irq);
 		return -EINVAL;
@@ -720,12 +664,10 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return init_hpdi(dev);
 }
 
-static int hpdi_detach(struct comedi_device *dev)
+static void hpdi_detach(struct comedi_device *dev)
 {
 	unsigned int i;
 
-	printk(KERN_WARNING "comedi%d: gsc_hpdi: remove\n", dev->minor);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if ((priv(dev)) && (priv(dev)->hw_dev)) {
@@ -758,7 +700,6 @@ static int hpdi_detach(struct comedi_device *dev)
 			comedi_pci_disable(priv(dev)->hw_dev);
 		pci_dev_put(priv(dev)->hw_dev);
 	}
-	return 0;
 }
 
 static int dio_config_block_size(struct comedi_device *dev, unsigned int *data)
@@ -1113,6 +1054,39 @@ static int hpdi_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 	return 0;
 }
 
+static struct comedi_driver gsc_hpdi_driver = {
+	.driver_name	= "gsc_hpdi",
+	.module		= THIS_MODULE,
+	.attach		= hpdi_attach,
+	.detach		= hpdi_detach,
+};
+
+static int __devinit gsc_hpdi_pci_probe(struct pci_dev *dev,
+					const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &gsc_hpdi_driver);
+}
+
+static void __devexit gsc_hpdi_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(gsc_hpdi_pci_table) = {
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9080, PCI_VENDOR_ID_PLX,
+		    0x2400, 0, 0, 0},
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, gsc_hpdi_pci_table);
+
+static struct pci_driver gsc_hpdi_pci_driver = {
+	.name		= "gsc_hpdi",
+	.id_table	= gsc_hpdi_pci_table,
+	.probe		= gsc_hpdi_pci_probe,
+	.remove		= __devexit_p(gsc_hpdi_pci_remove)
+};
+module_comedi_pci_driver(gsc_hpdi_driver, gsc_hpdi_pci_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index 126550f3c02b..fdc596fb0990 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -121,15 +121,6 @@ static const char range_codes_analog[] = { 0x00, 0x20, 0x10, 0x30 };
 
 /*
 ==============================================================================
-	Forward declarations
-==============================================================================
-*/
-static int icp_multi_attach(struct comedi_device *dev,
-			    struct comedi_devconfig *it);
-static int icp_multi_detach(struct comedi_device *dev);
-
-/*
-==============================================================================
 	Data & Structure declarations
 ==============================================================================
 */
@@ -154,50 +145,6 @@ struct boardtype {
 	const struct comedi_lrange *rangelist_ao;	/*  rangelist for D/A */
 };
 
-static const struct boardtype boardtypes[] = {
-	{"icp_multi",		/*  Driver name */
-	 DEVICE_ID,		/*  PCI device ID */
-	 IORANGE_ICP_MULTI,	/*  I/O range length */
-	 1,			/*  1=Card supports interrupts */
-	 TYPE_ICP_MULTI,	/*  Card type = ICP MULTI */
-	 16,			/*  Num of A/D channels */
-	 8,			/*  Num of A/D channels in diff mode */
-	 4,			/*  Num of D/A channels */
-	 16,			/*  Num of digital inputs */
-	 8,			/*  Num of digital outputs */
-	 4,			/*  Num of counters */
-	 0x0fff,		/*  Resolution of A/D */
-	 0x0fff,		/*  Resolution of D/A */
-	 &range_analog,		/*  Rangelist for A/D */
-	 range_codes_analog,	/*  Range codes for programming */
-	 &range_analog},	/*  Rangelist for D/A */
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct boardtype))
-
-static struct comedi_driver driver_icp_multi = {
-	.driver_name = "icp_multi",
-	.module = THIS_MODULE,
-	.attach = icp_multi_attach,
-	.detach = icp_multi_detach,
-	.num_names = n_boardtypes,
-	.board_name = &boardtypes[0].name,
-	.offset = sizeof(struct boardtype),
-};
-
-static int __init driver_icp_multi_init_module(void)
-{
-	return comedi_driver_register(&driver_icp_multi);
-}
-
-static void __exit driver_icp_multi_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_icp_multi);
-}
-
-module_init(driver_icp_multi_init_module);
-module_exit(driver_icp_multi_cleanup_module);
-
 struct icp_multi_private {
 	struct pcilst_struct *card;	/*  pointer to card */
 	char valid;		/*  card is usable */
@@ -222,25 +169,81 @@ struct icp_multi_private {
 
 /*
 ==============================================================================
-	More forward declarations
+
+Name:	setup_channel_list
+
+Description:
+	This function sets the appropriate channel selection,
+	differential input mode and range bits in the ADC Command/
+	Status register.
+
+Parameters:
+	struct comedi_device *dev	Pointer to current service structure
+	struct comedi_subdevice *s	Pointer to current subdevice structure
+	unsigned int *chanlist	Pointer to packed channel list
+	unsigned int n_chan	Number of channels to scan
+
+Returns:Void
+
 ==============================================================================
 */
-
-#if 0
-static int check_channel_list(struct comedi_device *dev,
-			      struct comedi_subdevice *s,
-			      unsigned int *chanlist, unsigned int n_chan);
-#endif
 static void setup_channel_list(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
-			       unsigned int *chanlist, unsigned int n_chan);
-static int icp_multi_reset(struct comedi_device *dev);
+			       unsigned int *chanlist, unsigned int n_chan)
+{
+	unsigned int i, range, chanprog;
+	unsigned int diff;
 
-/*
-==============================================================================
-	Functions
-==============================================================================
-*/
+#ifdef ICP_MULTI_EXTDEBUG
+	printk(KERN_DEBUG
+	       "icp multi EDBG:  setup_channel_list(...,%d)\n", n_chan);
+#endif
+	devpriv->act_chanlist_len = n_chan;
+	devpriv->act_chanlist_pos = 0;
+
+	for (i = 0; i < n_chan; i++) {
+		/*  Get channel */
+		chanprog = CR_CHAN(chanlist[i]);
+
+		/*  Determine if it is a differential channel (Bit 15  = 1) */
+		if (CR_AREF(chanlist[i]) == AREF_DIFF) {
+			diff = 1;
+			chanprog &= 0x0007;
+		} else {
+			diff = 0;
+			chanprog &= 0x000f;
+		}
+
+		/*  Clear channel, range and input mode bits
+		 *  in A/D command/status register */
+		devpriv->AdcCmdStatus &= 0xf00f;
+
+		/*  Set channel number and differential mode status bit */
+		if (diff) {
+			/*  Set channel number, bits 9-11 & mode, bit 6 */
+			devpriv->AdcCmdStatus |= (chanprog << 9);
+			devpriv->AdcCmdStatus |= ADC_DI;
+		} else
+			/*  Set channel number, bits 8-11 */
+			devpriv->AdcCmdStatus |= (chanprog << 8);
+
+		/*  Get range for current channel */
+		range = this_board->rangecode[CR_RANGE(chanlist[i])];
+		/*  Set range. bits 4-5 */
+		devpriv->AdcCmdStatus |= range;
+
+		/* Output channel, range, mode to ICP Multi */
+		writew(devpriv->AdcCmdStatus,
+		       devpriv->io_addr + ICP_MULTI_ADC_CSR);
+
+#ifdef ICP_MULTI_EXTDEBUG
+		printk(KERN_DEBUG
+		       "GS: %2d. [%4x]=%4x %4x\n", i, chanprog, range,
+		       devpriv->act_chanlist[i]);
+#endif
+	}
+
+}
 
 /*
 ==============================================================================
@@ -764,84 +767,6 @@ static int check_channel_list(struct comedi_device *dev,
 /*
 ==============================================================================
 
-Name:	setup_channel_list
-
-Description:
-	This function sets the appropriate channel selection,
-	differential input mode and range bits in the ADC Command/
-	Status register.
-
-Parameters:
-	struct comedi_device *dev	Pointer to current service structure
-	struct comedi_subdevice *s	Pointer to current subdevice structure
-	unsigned int *chanlist	Pointer to packed channel list
-	unsigned int n_chan	Number of channels to scan
-
-Returns:Void
-
-==============================================================================
-*/
-static void setup_channel_list(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       unsigned int *chanlist, unsigned int n_chan)
-{
-	unsigned int i, range, chanprog;
-	unsigned int diff;
-
-#ifdef ICP_MULTI_EXTDEBUG
-	printk(KERN_DEBUG
-	       "icp multi EDBG:  setup_channel_list(...,%d)\n", n_chan);
-#endif
-	devpriv->act_chanlist_len = n_chan;
-	devpriv->act_chanlist_pos = 0;
-
-	for (i = 0; i < n_chan; i++) {
-		/*  Get channel */
-		chanprog = CR_CHAN(chanlist[i]);
-
-		/*  Determine if it is a differential channel (Bit 15  = 1) */
-		if (CR_AREF(chanlist[i]) == AREF_DIFF) {
-			diff = 1;
-			chanprog &= 0x0007;
-		} else {
-			diff = 0;
-			chanprog &= 0x000f;
-		}
-
-		/*  Clear channel, range and input mode bits
-		 *  in A/D command/status register */
-		devpriv->AdcCmdStatus &= 0xf00f;
-
-		/*  Set channel number and differential mode status bit */
-		if (diff) {
-			/*  Set channel number, bits 9-11 & mode, bit 6 */
-			devpriv->AdcCmdStatus |= (chanprog << 9);
-			devpriv->AdcCmdStatus |= ADC_DI;
-		} else
-			/*  Set channel number, bits 8-11 */
-			devpriv->AdcCmdStatus |= (chanprog << 8);
-
-		/*  Get range for current channel */
-		range = this_board->rangecode[CR_RANGE(chanlist[i])];
-		/*  Set range. bits 4-5 */
-		devpriv->AdcCmdStatus |= range;
-
-		/* Output channel, range, mode to ICP Multi */
-		writew(devpriv->AdcCmdStatus,
-		       devpriv->io_addr + ICP_MULTI_ADC_CSR);
-
-#ifdef ICP_MULTI_EXTDEBUG
-		printk(KERN_DEBUG
-		       "GS: %2d. [%4x]=%4x %4x\n", i, chanprog, range,
-		       devpriv->act_chanlist[i]);
-#endif
-	}
-
-}
-
-/*
-==============================================================================
-
 Name:	icp_multi_reset
 
 Description:
@@ -897,23 +822,6 @@ static int icp_multi_reset(struct comedi_device *dev)
 	return 0;
 }
 
-/*
-==============================================================================
-
-Name:	icp_multi_attach
-
-Description:
-	This function sets up all the appropriate data for the current
-	device.
-
-Parameters:
-	struct comedi_device *dev	Pointer to current device structure
-	struct comedi_devconfig *it	Pointer to current device configuration
-
-Returns:int	0 = success
-
-==============================================================================
-*/
 static int icp_multi_attach(struct comedi_device *dev,
 			    struct comedi_devconfig *it)
 {
@@ -1099,44 +1007,53 @@ static int icp_multi_attach(struct comedi_device *dev,
 	return 0;
 }
 
-/*
-==============================================================================
-
-Name:	icp_multi_detach
-
-Description:
-	This function releases all the resources used by the current
-	device.
-
-Parameters:
-	struct comedi_device *dev	Pointer to current device structure
-
-Returns:int	0 = success
-
-==============================================================================
-*/
-static int icp_multi_detach(struct comedi_device *dev)
+static void icp_multi_detach(struct comedi_device *dev)
 {
-
 	if (dev->private)
 		if (devpriv->valid)
 			icp_multi_reset(dev);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (dev->private && devpriv->io_addr)
 		iounmap(devpriv->io_addr);
-
 	if (dev->private && devpriv->card)
 		pci_card_free(devpriv->card);
-
 	if (--pci_list_builded == 0)
 		pci_card_list_cleanup(PCI_VENDOR_ID_ICP);
-
-	return 0;
 }
 
+static const struct boardtype boardtypes[] = {
+	{
+		.name		= "icp_multi",
+		.device_id	= DEVICE_ID,
+		.iorange	= IORANGE_ICP_MULTI,
+		.have_irq	= 1,
+		.cardtype	= TYPE_ICP_MULTI,
+		.n_aichan	= 16,
+		.n_aichand	= 8,
+		.n_aochan	= 4,
+		.n_dichan	= 16,
+		.n_dochan	= 8,
+		.n_ctrs		= 4,
+		.ai_maxdata	= 0x0fff,
+		.ao_maxdata	= 0x0fff,
+		.rangelist_ai	= &range_analog,
+		.rangecode	= range_codes_analog,
+		.rangelist_ao	= &range_analog,
+	},
+};
+
+static struct comedi_driver icp_multi_driver = {
+	.driver_name	= "icp_multi",
+	.module		= THIS_MODULE,
+	.attach		= icp_multi_attach,
+	.detach		= icp_multi_detach,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.board_name	= &boardtypes[0].name,
+	.offset		= sizeof(struct boardtype),
+};
+module_comedi_driver(icp_multi_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c
index e4711ef54719..f0a579a04a7d 100644
--- a/drivers/staging/comedi/drivers/ii_pci20kc.c
+++ b/drivers/staging/comedi/drivers/ii_pci20kc.c
@@ -159,17 +159,6 @@ struct pci20xxx_private {
 #define devpriv ((struct pci20xxx_private *)dev->private)
 #define CHAN (CR_CHAN(it->chanlist[0]))
 
-static int pci20xxx_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int pci20xxx_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_pci20xxx = {
-	.driver_name = "ii_pci20kc",
-	.module = THIS_MODULE,
-	.attach = pci20xxx_attach,
-	.detach = pci20xxx_detach,
-};
-
 static int pci20006_init(struct comedi_device *dev, struct comedi_subdevice *s,
 			 int opt0, int opt1);
 static int pci20341_init(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -275,11 +264,9 @@ static int pci20xxx_attach(struct comedi_device *dev,
 	return 1;
 }
 
-static int pci20xxx_detach(struct comedi_device *dev)
+static void pci20xxx_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: pci20xxx: remove\n", dev->minor);
-
-	return 0;
+	/* Nothing to cleanup */
 }
 
 /* pci20006m */
@@ -666,18 +653,13 @@ static unsigned int pci20xxx_di(struct comedi_device *dev,
 }
 #endif
 
-static int __init driver_pci20xxx_init_module(void)
-{
-	return comedi_driver_register(&driver_pci20xxx);
-}
-
-static void __exit driver_pci20xxx_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pci20xxx);
-}
-
-module_init(driver_pci20xxx_init_module);
-module_exit(driver_pci20xxx_cleanup_module);
+static struct comedi_driver pci20xxx_driver = {
+	.driver_name	= "ii_pci20kc",
+	.module		= THIS_MODULE,
+	.attach		= pci20xxx_attach,
+	.detach		= pci20xxx_detach,
+};
+module_comedi_driver(pci20xxx_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index 6a79ba10630d..d536a11edb95 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -59,28 +59,6 @@ Devices: [JR3] PCI force sensor board (jr3_pci)
 #define PCI_DEVICE_ID_JR3_3_CHANNEL 0x3113
 #define PCI_DEVICE_ID_JR3_4_CHANNEL 0x3114
 
-static int jr3_pci_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int jr3_pci_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_jr3_pci = {
-	.driver_name = "jr3_pci",
-	.module = THIS_MODULE,
-	.attach = jr3_pci_attach,
-	.detach = jr3_pci_detach,
-};
-
-static DEFINE_PCI_DEVICE_TABLE(jr3_pci_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL_NEW) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_2_CHANNEL) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_3_CHANNEL) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_4_CHANNEL) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, jr3_pci_pci_table);
-
 struct jr3_pci_dev_private {
 
 	struct pci_dev *pci_dev;
@@ -948,9 +926,7 @@ out:
 	return result;
 }
 
-MODULE_FIRMWARE("comedi/jr3pci.idm");
-
-static int jr3_pci_detach(struct comedi_device *dev)
+static void jr3_pci_detach(struct comedi_device *dev)
 {
 	int i;
 	struct jr3_pci_dev_private *devpriv = dev->private;
@@ -962,56 +938,52 @@ static int jr3_pci_detach(struct comedi_device *dev)
 			for (i = 0; i < devpriv->n_channels; i++)
 				kfree(dev->subdevices[i].private);
 		}
-
 		if (devpriv->iobase)
 			iounmap((void *)devpriv->iobase);
 		if (devpriv->pci_enabled)
 			comedi_pci_disable(devpriv->pci_dev);
-
 		if (devpriv->pci_dev)
 			pci_dev_put(devpriv->pci_dev);
 	}
-	return 0;
 }
 
-static int __devinit driver_jr3_pci_pci_probe(struct pci_dev *dev,
-					      const struct pci_device_id *ent)
+static struct comedi_driver jr3_pci_driver = {
+	.driver_name	= "jr3_pci",
+	.module		= THIS_MODULE,
+	.attach		= jr3_pci_attach,
+	.detach		= jr3_pci_detach,
+};
+
+static int __devinit jr3_pci_pci_probe(struct pci_dev *dev,
+				       const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_jr3_pci.driver_name);
+	return comedi_pci_auto_config(dev, &jr3_pci_driver);
 }
 
-static void __devexit driver_jr3_pci_pci_remove(struct pci_dev *dev)
+static void __devexit jr3_pci_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_jr3_pci_pci_driver = {
-	.id_table = jr3_pci_pci_table,
-	.probe = &driver_jr3_pci_pci_probe,
-	.remove = __devexit_p(&driver_jr3_pci_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(jr3_pci_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_1_CHANNEL_NEW) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_2_CHANNEL) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_3_CHANNEL) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_JR3, PCI_DEVICE_ID_JR3_4_CHANNEL) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, jr3_pci_pci_table);
 
-static int __init driver_jr3_pci_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_jr3_pci);
-	if (retval < 0)
-		return retval;
-
-	driver_jr3_pci_pci_driver.name = (char *)driver_jr3_pci.driver_name;
-	return pci_register_driver(&driver_jr3_pci_pci_driver);
-}
-
-static void __exit driver_jr3_pci_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_jr3_pci_pci_driver);
-	comedi_driver_unregister(&driver_jr3_pci);
-}
-
-module_init(driver_jr3_pci_init_module);
-module_exit(driver_jr3_pci_cleanup_module);
+static struct pci_driver jr3_pci_pci_driver = {
+	.name		= "jr3_pci",
+	.id_table	= jr3_pci_pci_table,
+	.probe		= jr3_pci_pci_probe,
+	.remove		= __devexit_p(jr3_pci_pci_remove),
+};
+module_comedi_pci_driver(jr3_pci_driver, jr3_pci_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("comedi/jr3pci.idm");
diff --git a/drivers/staging/comedi/drivers/ke_counter.c b/drivers/staging/comedi/drivers/ke_counter.c
index 4e9e9a078652..09d191844bf8 100644
--- a/drivers/staging/comedi/drivers/ke_counter.c
+++ b/drivers/staging/comedi/drivers/ke_counter.c
@@ -46,18 +46,6 @@ Kolter Electronic PCI Counter Card.
 #define PCI_VENDOR_ID_KOLTER    0x1001
 #define CNT_CARD_DEVICE_ID      0x0014
 
-/*-- function prototypes ----------------------------------------------------*/
-
-static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int cnt_detach(struct comedi_device *dev);
-
-static DEFINE_PCI_DEVICE_TABLE(cnt_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_KOLTER, CNT_CARD_DEVICE_ID) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, cnt_pci_table);
-
 /*-- board specification structure ------------------------------------------*/
 
 struct cnt_board_struct {
@@ -87,51 +75,6 @@ struct cnt_device_private {
 
 #define devpriv ((struct cnt_device_private *)dev->private)
 
-static struct comedi_driver cnt_driver = {
-	.driver_name = CNT_DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = cnt_attach,
-	.detach = cnt_detach,
-};
-
-static int __devinit cnt_driver_pci_probe(struct pci_dev *dev,
-					  const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, cnt_driver.driver_name);
-}
-
-static void __devexit cnt_driver_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver cnt_driver_pci_driver = {
-	.id_table = cnt_pci_table,
-	.probe = &cnt_driver_pci_probe,
-	.remove = __devexit_p(&cnt_driver_pci_remove)
-};
-
-static int __init cnt_driver_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&cnt_driver);
-	if (retval < 0)
-		return retval;
-
-	cnt_driver_pci_driver.name = (char *)cnt_driver.driver_name;
-	return pci_register_driver(&cnt_driver_pci_driver);
-}
-
-static void __exit cnt_driver_cleanup_module(void)
-{
-	pci_unregister_driver(&cnt_driver_pci_driver);
-	comedi_driver_unregister(&cnt_driver);
-}
-
-module_init(cnt_driver_init_module);
-module_exit(cnt_driver_cleanup_module);
-
 /*-- counter write ----------------------------------------------------------*/
 
 /* This should be used only for resetting the counters; maybe it is better
@@ -181,8 +124,6 @@ static int cnt_rinsn(struct comedi_device *dev,
 	return 1;
 }
 
-/*-- attach -----------------------------------------------------------------*/
-
 static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *subdevice;
@@ -278,20 +219,47 @@ found:
 	return 0;
 }
 
-/*-- detach -----------------------------------------------------------------*/
-
-static int cnt_detach(struct comedi_device *dev)
+static void cnt_detach(struct comedi_device *dev)
 {
 	if (devpriv && devpriv->pcidev) {
 		if (dev->iobase)
 			comedi_pci_disable(devpriv->pcidev);
 		pci_dev_put(devpriv->pcidev);
 	}
-	printk(KERN_INFO "comedi%d: " CNT_DRIVER_NAME " remove\n",
-	       dev->minor);
-	return 0;
 }
 
+static struct comedi_driver ke_counter_driver = {
+	.driver_name	= "ke_counter",
+	.module		= THIS_MODULE,
+	.attach		= cnt_attach,
+	.detach		= cnt_detach,
+};
+
+static int __devinit ke_counter_pci_probe(struct pci_dev *dev,
+					  const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &ke_counter_driver);
+}
+
+static void __devexit ke_counter_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(ke_counter_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_KOLTER, CNT_CARD_DEVICE_ID) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, ke_counter_pci_table);
+
+static struct pci_driver ke_counter_pci_driver = {
+	.name		= "ke_counter",
+	.id_table	= ke_counter_pci_table,
+	.probe		= ke_counter_pci_probe,
+	.remove		= __devexit_p(ke_counter_pci_remove),
+};
+module_comedi_pci_driver(ke_counter_driver, ke_counter_pci_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index b0bc6bb877ab..8ca1b54600db 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -65,30 +65,6 @@ broken.
 #include "me4000_fw.h"
 #endif
 
-/*=============================================================================
-  PCI device table.
-  This is used by modprobe to translate PCI IDs to drivers.
-  ===========================================================================*/
-
-static DEFINE_PCI_DEVICE_TABLE(me4000_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4650) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4660) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4661) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4662) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4663) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4670) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4671) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4672) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4673) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4680) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4681) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4682) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4683) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, me4000_pci_table);
-
 static const struct me4000_board me4000_boards[] = {
 	{"ME-4650", 0x4650, {0, 0}, {16, 0, 0, 0}, {4}, {0} },
 
@@ -113,22 +89,8 @@ static const struct me4000_board me4000_boards[] = {
 #define ME4000_BOARD_VERSIONS (ARRAY_SIZE(me4000_boards) - 1)
 
 /*-----------------------------------------------------------------------------
-  Comedi function prototypes
-  ---------------------------------------------------------------------------*/
-static int me4000_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int me4000_detach(struct comedi_device *dev);
-static struct comedi_driver driver_me4000 = {
-	.driver_name = "me4000",
-	.module = THIS_MODULE,
-	.attach = me4000_attach,
-	.detach = me4000_detach,
-};
-
-/*-----------------------------------------------------------------------------
   Meilhaus function prototypes
   ---------------------------------------------------------------------------*/
-static int me4000_probe(struct comedi_device *dev, struct comedi_devconfig *it);
 static int get_registers(struct comedi_device *dev, struct pci_dev *pci_dev_p);
 static int init_board_info(struct comedi_device *dev,
 			   struct pci_dev *pci_dev_p);
@@ -139,76 +101,10 @@ static int init_cnt_context(struct comedi_device *dev);
 static int xilinx_download(struct comedi_device *dev);
 static int reset_board(struct comedi_device *dev);
 
-static int me4000_dio_insn_bits(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-
-static int me4000_dio_insn_config(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data);
-
-static int cnt_reset(struct comedi_device *dev, unsigned int channel);
-
-static int cnt_config(struct comedi_device *dev,
-		      unsigned int channel, unsigned int mode);
-
-static int me4000_cnt_insn_config(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data);
-
-static int me4000_cnt_insn_write(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data);
-
-static int me4000_cnt_insn_read(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-
-static int me4000_ai_insn_read(struct comedi_device *dev,
-			       struct comedi_subdevice *subdevice,
-			       struct comedi_insn *insn, unsigned int *data);
-
-static int me4000_ai_cancel(struct comedi_device *dev,
-			    struct comedi_subdevice *s);
-
-static int ai_check_chanlist(struct comedi_device *dev,
-			     struct comedi_subdevice *s,
-			     struct comedi_cmd *cmd);
-
-static int ai_round_cmd_args(struct comedi_device *dev,
-			     struct comedi_subdevice *s,
-			     struct comedi_cmd *cmd,
-			     unsigned int *init_ticks,
-			     unsigned int *scan_ticks,
-			     unsigned int *chan_ticks);
-
-static int ai_prepare(struct comedi_device *dev,
-		      struct comedi_subdevice *s,
-		      struct comedi_cmd *cmd,
-		      unsigned int init_ticks,
-		      unsigned int scan_ticks, unsigned int chan_ticks);
-
 static int ai_write_chanlist(struct comedi_device *dev,
 			     struct comedi_subdevice *s,
 			     struct comedi_cmd *cmd);
 
-static irqreturn_t me4000_ai_isr(int irq, void *dev_id);
-
-static int me4000_ai_do_cmd_test(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_cmd *cmd);
-
-static int me4000_ai_do_cmd(struct comedi_device *dev,
-			    struct comedi_subdevice *s);
-
-static int me4000_ao_insn_write(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-
-static int me4000_ao_insn_read(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-
 /*-----------------------------------------------------------------------------
   Meilhaus inline functions
   ---------------------------------------------------------------------------*/
@@ -262,130 +158,6 @@ static const struct comedi_lrange me4000_ao_range = {
 	 }
 };
 
-static int me4000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int result;
-
-	CALL_PDEBUG("In me4000_attach()\n");
-
-	result = me4000_probe(dev, it);
-	if (result)
-		return result;
-
-	/*
-	 * Allocate the subdevice structures.  alloc_subdevice() is a
-	 * convenient macro defined in comedidev.h.  It relies on
-	 * n_subdevices being set correctly.
-	 */
-	if (alloc_subdevices(dev, 4) < 0)
-		return -ENOMEM;
-
-    /*=========================================================================
-      Analog input subdevice
-      ========================================================================*/
-
-	s = dev->subdevices + 0;
-
-	if (thisboard->ai.count) {
-		s->type = COMEDI_SUBD_AI;
-		s->subdev_flags =
-		    SDF_READABLE | SDF_COMMON | SDF_GROUND | SDF_DIFF;
-		s->n_chan = thisboard->ai.count;
-		s->maxdata = 0xFFFF;	/*  16 bit ADC */
-		s->len_chanlist = ME4000_AI_CHANNEL_LIST_COUNT;
-		s->range_table = &me4000_ai_range;
-		s->insn_read = me4000_ai_insn_read;
-
-		if (info->irq > 0) {
-			if (request_irq(info->irq, me4000_ai_isr,
-					IRQF_SHARED, "ME-4000", dev)) {
-				printk
-				    ("comedi%d: me4000: me4000_attach(): "
-				     "Unable to allocate irq\n", dev->minor);
-			} else {
-				dev->read_subdev = s;
-				s->subdev_flags |= SDF_CMD_READ;
-				s->cancel = me4000_ai_cancel;
-				s->do_cmdtest = me4000_ai_do_cmd_test;
-				s->do_cmd = me4000_ai_do_cmd;
-			}
-		} else {
-			printk(KERN_WARNING
-			       "comedi%d: me4000: me4000_attach(): "
-			       "No interrupt available\n", dev->minor);
-		}
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
-	}
-
-    /*=========================================================================
-      Analog output subdevice
-      ========================================================================*/
-
-	s = dev->subdevices + 1;
-
-	if (thisboard->ao.count) {
-		s->type = COMEDI_SUBD_AO;
-		s->subdev_flags = SDF_WRITEABLE | SDF_COMMON | SDF_GROUND;
-		s->n_chan = thisboard->ao.count;
-		s->maxdata = 0xFFFF;	/*  16 bit DAC */
-		s->range_table = &me4000_ao_range;
-		s->insn_write = me4000_ao_insn_write;
-		s->insn_read = me4000_ao_insn_read;
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
-	}
-
-    /*=========================================================================
-      Digital I/O subdevice
-      ========================================================================*/
-
-	s = dev->subdevices + 2;
-
-	if (thisboard->dio.count) {
-		s->type = COMEDI_SUBD_DIO;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->n_chan = thisboard->dio.count * 8;
-		s->maxdata = 1;
-		s->range_table = &range_digital;
-		s->insn_bits = me4000_dio_insn_bits;
-		s->insn_config = me4000_dio_insn_config;
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
-	}
-
-	/*
-	 * Check for optoisolated ME-4000 version. If one the first
-	 * port is a fixed output port and the second is a fixed input port.
-	 */
-	if (!me4000_inl(dev, info->dio_context.dir_reg)) {
-		s->io_bits |= 0xFF;
-		me4000_outl(dev, ME4000_DIO_CTRL_BIT_MODE_0,
-			    info->dio_context.dir_reg);
-	}
-
-    /*=========================================================================
-      Counter subdevice
-      ========================================================================*/
-
-	s = dev->subdevices + 3;
-
-	if (thisboard->cnt.count) {
-		s->type = COMEDI_SUBD_COUNTER;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->n_chan = thisboard->cnt.count;
-		s->maxdata = 0xFFFF;	/*  16 bit counters */
-		s->insn_read = me4000_cnt_insn_read;
-		s->insn_write = me4000_cnt_insn_write;
-		s->insn_config = me4000_cnt_insn_config;
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
-	}
-
-	return 0;
-}
-
 static int me4000_probe(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pci_dev *pci_device = NULL;
@@ -920,22 +692,6 @@ static int reset_board(struct comedi_device *dev)
 	return 0;
 }
 
-static int me4000_detach(struct comedi_device *dev)
-{
-	CALL_PDEBUG("In me4000_detach()\n");
-
-	if (info) {
-		if (info->pci_dev_p) {
-			reset_board(dev);
-			if (info->plx_regbase)
-				comedi_pci_disable(info->pci_dev_p);
-			pci_dev_put(info->pci_dev_p);
-		}
-	}
-
-	return 0;
-}
-
 /*=============================================================================
   Analog input section
   ===========================================================================*/
@@ -2424,43 +2180,185 @@ static int me4000_cnt_insn_write(struct comedi_device *dev,
 	return 1;
 }
 
-static int __devinit driver_me4000_pci_probe(struct pci_dev *dev,
-					     const struct pci_device_id *ent)
+static int me4000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
-	return comedi_pci_auto_config(dev, driver_me4000.driver_name);
+	struct comedi_subdevice *s;
+	int result;
+
+	CALL_PDEBUG("In me4000_attach()\n");
+
+	result = me4000_probe(dev, it);
+	if (result)
+		return result;
+
+	/*
+	 * Allocate the subdevice structures.  alloc_subdevice() is a
+	 * convenient macro defined in comedidev.h.  It relies on
+	 * n_subdevices being set correctly.
+	 */
+	if (alloc_subdevices(dev, 4) < 0)
+		return -ENOMEM;
+
+    /*=========================================================================
+      Analog input subdevice
+      ========================================================================*/
+
+	s = dev->subdevices + 0;
+
+	if (thisboard->ai.count) {
+		s->type = COMEDI_SUBD_AI;
+		s->subdev_flags =
+		    SDF_READABLE | SDF_COMMON | SDF_GROUND | SDF_DIFF;
+		s->n_chan = thisboard->ai.count;
+		s->maxdata = 0xFFFF;	/*  16 bit ADC */
+		s->len_chanlist = ME4000_AI_CHANNEL_LIST_COUNT;
+		s->range_table = &me4000_ai_range;
+		s->insn_read = me4000_ai_insn_read;
+
+		if (info->irq > 0) {
+			if (request_irq(info->irq, me4000_ai_isr,
+					IRQF_SHARED, "ME-4000", dev)) {
+				printk
+				    ("comedi%d: me4000: me4000_attach(): "
+				     "Unable to allocate irq\n", dev->minor);
+			} else {
+				dev->read_subdev = s;
+				s->subdev_flags |= SDF_CMD_READ;
+				s->cancel = me4000_ai_cancel;
+				s->do_cmdtest = me4000_ai_do_cmd_test;
+				s->do_cmd = me4000_ai_do_cmd;
+			}
+		} else {
+			printk(KERN_WARNING
+			       "comedi%d: me4000: me4000_attach(): "
+			       "No interrupt available\n", dev->minor);
+		}
+	} else {
+		s->type = COMEDI_SUBD_UNUSED;
+	}
+
+    /*=========================================================================
+      Analog output subdevice
+      ========================================================================*/
+
+	s = dev->subdevices + 1;
+
+	if (thisboard->ao.count) {
+		s->type = COMEDI_SUBD_AO;
+		s->subdev_flags = SDF_WRITEABLE | SDF_COMMON | SDF_GROUND;
+		s->n_chan = thisboard->ao.count;
+		s->maxdata = 0xFFFF;	/*  16 bit DAC */
+		s->range_table = &me4000_ao_range;
+		s->insn_write = me4000_ao_insn_write;
+		s->insn_read = me4000_ao_insn_read;
+	} else {
+		s->type = COMEDI_SUBD_UNUSED;
+	}
+
+    /*=========================================================================
+      Digital I/O subdevice
+      ========================================================================*/
+
+	s = dev->subdevices + 2;
+
+	if (thisboard->dio.count) {
+		s->type = COMEDI_SUBD_DIO;
+		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+		s->n_chan = thisboard->dio.count * 8;
+		s->maxdata = 1;
+		s->range_table = &range_digital;
+		s->insn_bits = me4000_dio_insn_bits;
+		s->insn_config = me4000_dio_insn_config;
+	} else {
+		s->type = COMEDI_SUBD_UNUSED;
+	}
+
+	/*
+	 * Check for optoisolated ME-4000 version. If one the first
+	 * port is a fixed output port and the second is a fixed input port.
+	 */
+	if (!me4000_inl(dev, info->dio_context.dir_reg)) {
+		s->io_bits |= 0xFF;
+		me4000_outl(dev, ME4000_DIO_CTRL_BIT_MODE_0,
+			    info->dio_context.dir_reg);
+	}
+
+    /*=========================================================================
+      Counter subdevice
+      ========================================================================*/
+
+	s = dev->subdevices + 3;
+
+	if (thisboard->cnt.count) {
+		s->type = COMEDI_SUBD_COUNTER;
+		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+		s->n_chan = thisboard->cnt.count;
+		s->maxdata = 0xFFFF;	/*  16 bit counters */
+		s->insn_read = me4000_cnt_insn_read;
+		s->insn_write = me4000_cnt_insn_write;
+		s->insn_config = me4000_cnt_insn_config;
+	} else {
+		s->type = COMEDI_SUBD_UNUSED;
+	}
+
+	return 0;
 }
 
-static void __devexit driver_me4000_pci_remove(struct pci_dev *dev)
+static void me4000_detach(struct comedi_device *dev)
 {
-	comedi_pci_auto_unconfig(dev);
+	if (info) {
+		if (info->pci_dev_p) {
+			reset_board(dev);
+			if (info->plx_regbase)
+				comedi_pci_disable(info->pci_dev_p);
+			pci_dev_put(info->pci_dev_p);
+		}
+	}
 }
 
-static struct pci_driver driver_me4000_pci_driver = {
-	.id_table = me4000_pci_table,
-	.probe = &driver_me4000_pci_probe,
-	.remove = __devexit_p(&driver_me4000_pci_remove)
+static struct comedi_driver me4000_driver = {
+	.driver_name	= "me4000",
+	.module		= THIS_MODULE,
+	.attach		= me4000_attach,
+	.detach		= me4000_detach,
 };
 
-static int __init driver_me4000_init_module(void)
+static int __devinit me4000_pci_probe(struct pci_dev *dev,
+				      const struct pci_device_id *ent)
 {
-	int retval;
-
-	retval = comedi_driver_register(&driver_me4000);
-	if (retval < 0)
-		return retval;
-
-	driver_me4000_pci_driver.name = (char *)driver_me4000.driver_name;
-	return pci_register_driver(&driver_me4000_pci_driver);
+	return comedi_pci_auto_config(dev, &me4000_driver);
 }
 
-static void __exit driver_me4000_cleanup_module(void)
+static void __devexit me4000_pci_remove(struct pci_dev *dev)
 {
-	pci_unregister_driver(&driver_me4000_pci_driver);
-	comedi_driver_unregister(&driver_me4000);
+	comedi_pci_auto_unconfig(dev);
 }
 
-module_init(driver_me4000_init_module);
-module_exit(driver_me4000_cleanup_module);
+static DEFINE_PCI_DEVICE_TABLE(me4000_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4650) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4660) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4661) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4662) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4663) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4670) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4671) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4672) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4673) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4680) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4681) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4682) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, 0x4683) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, me4000_pci_table);
+
+static struct pci_driver me4000_pci_driver = {
+	.name		= "me4000",
+	.id_table	= me4000_pci_table,
+	.probe		= me4000_pci_probe,
+	.remove		= __devexit_p(me4000_pci_remove),
+};
+module_comedi_pci_driver(me4000_driver, me4000_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index 8b812e41c52b..ffe251250e6f 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -146,10 +146,6 @@ from http://www.comedi.org
 #define ME_COUNTER_STARTDATA_B		0x0022	/* - | W */
 #define ME_COUNTER_VALUE_B		0x0022	/* R | - */
 
-/* Function prototypes */
-static int me_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int me_detach(struct comedi_device *dev);
-
 static const struct comedi_lrange me2000_ai_range = {
 	8,
 	{
@@ -187,14 +183,6 @@ static const struct comedi_lrange me2600_ao_range = {
 	 }
 };
 
-static DEFINE_PCI_DEVICE_TABLE(me_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, ME2600_DEVICE_ID) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, ME2000_DEVICE_ID) },
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, me_pci_table);
-
 /* Board specification structure */
 struct me_board {
 	const char *name;	/* driver name */
@@ -247,51 +235,6 @@ static const struct me_board me_boards[] = {
 
 #define me_board_nbr (sizeof(me_boards)/sizeof(struct me_board))
 
-static struct comedi_driver me_driver = {
-	.driver_name = ME_DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = me_attach,
-	.detach = me_detach,
-};
-
-static int __devinit me_driver_pci_probe(struct pci_dev *dev,
-					 const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, me_driver.driver_name);
-}
-
-static void __devexit me_driver_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver me_driver_pci_driver = {
-	.id_table = me_pci_table,
-	.probe = &me_driver_pci_probe,
-	.remove = __devexit_p(&me_driver_pci_remove)
-};
-
-static int __init me_driver_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&me_driver);
-	if (retval < 0)
-		return retval;
-
-	me_driver_pci_driver.name = (char *)me_driver.driver_name;
-	return pci_register_driver(&me_driver_pci_driver);
-}
-
-static void __exit me_driver_cleanup_module(void)
-{
-	pci_unregister_driver(&me_driver_pci_driver);
-	comedi_driver_unregister(&me_driver);
-}
-
-module_init(me_driver_init_module);
-module_exit(me_driver_cleanup_module);
-
 /* Private data structure */
 struct me_private_data {
 	struct pci_dev *pci_device;
@@ -669,12 +612,6 @@ static int me_reset(struct comedi_device *dev)
 	return 0;
 }
 
-/*
- * Attach
- *
- * - Register PCI device
- * - Declare device driver capability
- */
 static int me_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct pci_dev *pci_device = NULL;
@@ -869,8 +806,7 @@ found:
 	return 0;
 }
 
-/* Detach */
-static int me_detach(struct comedi_device *dev)
+static void me_detach(struct comedi_device *dev)
 {
 	if (dev_private) {
 		if (dev_private->me_regbase) {
@@ -882,13 +818,44 @@ static int me_detach(struct comedi_device *dev)
 		if (dev_private->pci_device) {
 			if (dev_private->plx_regbase_size)
 				comedi_pci_disable(dev_private->pci_device);
-
 			pci_dev_put(dev_private->pci_device);
 		}
 	}
-	return 0;
 }
 
+static struct comedi_driver me_daq_driver = {
+	.driver_name	= "me_daq",
+	.module		= THIS_MODULE,
+	.attach		= me_attach,
+	.detach		= me_detach,
+};
+
+static int __devinit me_daq_pci_probe(struct pci_dev *dev,
+				      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &me_daq_driver);
+}
+
+static void __devexit me_daq_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(me_daq_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, ME2600_DEVICE_ID) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEILHAUS, ME2000_DEVICE_ID) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, me_daq_pci_table);
+
+static struct pci_driver me_daq_pci_driver = {
+	.name		= "me_daq",
+	.id_table	= me_daq_pci_table,
+	.probe		= me_daq_pci_probe,
+	.remove		= __devexit_p(me_daq_pci_remove),
+};
+module_comedi_pci_driver(me_daq_driver, me_daq_pci_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/mite.h b/drivers/staging/comedi/drivers/mite.h
index 999551f54c2a..83f1b27a4720 100644
--- a/drivers/staging/comedi/drivers/mite.h
+++ b/drivers/staging/comedi/drivers/mite.h
@@ -66,9 +66,9 @@ struct mite_struct {
 
 	struct pci_dev *pcidev;
 	resource_size_t mite_phys_addr;
-	void *mite_io_addr;
+	void __iomem *mite_io_addr;
 	resource_size_t daq_phys_addr;
-	void *daq_io_addr;
+	void __iomem *daq_io_addr;
 
 	struct mite_channel channels[MAX_MITE_DMA_CHANNELS];
 	short channel_allocated[MAX_MITE_DMA_CHANNELS];
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c
index dd09a6d46e5c..4304e864a4d4 100644
--- a/drivers/staging/comedi/drivers/mpc624.c
+++ b/drivers/staging/comedi/drivers/mpc624.c
@@ -148,131 +148,6 @@ static const struct comedi_lrange range_mpc624_bipolar10 = {
 	 }
 };
 
-/* -------------------------------------------------------------------------- */
-static int mpc624_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int mpc624_detach(struct comedi_device *dev);
-/* -------------------------------------------------------------------------- */
-static struct comedi_driver driver_mpc624 = {
-	.driver_name = "mpc624",
-	.module = THIS_MODULE,
-	.attach = mpc624_attach,
-	.detach = mpc624_detach
-};
-
-/* -------------------------------------------------------------------------- */
-static int mpc624_ai_rinsn(struct comedi_device *dev,
-			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data);
-/* -------------------------------------------------------------------------- */
-static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	unsigned long iobase;
-
-	iobase = it->options[0];
-	printk(KERN_INFO "comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
-	if (request_region(iobase, MPC624_SIZE, "mpc624") == NULL) {
-		printk(KERN_ERR "I/O port(s) in use\n");
-		return -EIO;
-	}
-
-	dev->iobase = iobase;
-	dev->board_name = "mpc624";
-
-	/*  Private structure initialization */
-	if (alloc_private(dev, sizeof(struct skel_private)) < 0)
-		return -ENOMEM;
-
-	switch (it->options[1]) {
-	case 0:
-		devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
-		printk(KERN_INFO "3.52 kHz, ");
-		break;
-	case 1:
-		devpriv->ulConvertionRate = MPC624_SPEED_1_76_kHz;
-		printk(KERN_INFO "1.76 kHz, ");
-		break;
-	case 2:
-		devpriv->ulConvertionRate = MPC624_SPEED_880_Hz;
-		printk(KERN_INFO "880 Hz, ");
-		break;
-	case 3:
-		devpriv->ulConvertionRate = MPC624_SPEED_440_Hz;
-		printk(KERN_INFO "440 Hz, ");
-		break;
-	case 4:
-		devpriv->ulConvertionRate = MPC624_SPEED_220_Hz;
-		printk(KERN_INFO "220 Hz, ");
-		break;
-	case 5:
-		devpriv->ulConvertionRate = MPC624_SPEED_110_Hz;
-		printk(KERN_INFO "110 Hz, ");
-		break;
-	case 6:
-		devpriv->ulConvertionRate = MPC624_SPEED_55_Hz;
-		printk(KERN_INFO "55 Hz, ");
-		break;
-	case 7:
-		devpriv->ulConvertionRate = MPC624_SPEED_27_5_Hz;
-		printk(KERN_INFO "27.5 Hz, ");
-		break;
-	case 8:
-		devpriv->ulConvertionRate = MPC624_SPEED_13_75_Hz;
-		printk(KERN_INFO "13.75 Hz, ");
-		break;
-	case 9:
-		devpriv->ulConvertionRate = MPC624_SPEED_6_875_Hz;
-		printk(KERN_INFO "6.875 Hz, ");
-		break;
-	default:
-		printk
-		    (KERN_ERR "illegal conversion rate setting!"
-			" Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
-		devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
-	}
-
-	/*  Subdevices structures */
-	if (alloc_subdevices(dev, 1) < 0)
-		return -ENOMEM;
-
-	s = dev->subdevices + 0;
-	s->type = COMEDI_SUBD_AI;
-	s->subdev_flags = SDF_READABLE | SDF_DIFF;
-	s->n_chan = 8;
-	switch (it->options[1]) {
-	default:
-		s->maxdata = 0x3FFFFFFF;
-		printk(KERN_INFO "30 bit, ");
-	}
-
-	switch (it->options[1]) {
-	case 0:
-		s->range_table = &range_mpc624_bipolar1;
-		printk(KERN_INFO "1.01V]: ");
-		break;
-	default:
-		s->range_table = &range_mpc624_bipolar10;
-		printk(KERN_INFO "10.1V]: ");
-	}
-	s->len_chanlist = 1;
-	s->insn_read = mpc624_ai_rinsn;
-
-	printk(KERN_INFO "attached\n");
-
-	return 1;
-}
-
-static int mpc624_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: mpc624: remove\n", dev->minor);
-
-	if (dev->iobase)
-		release_region(dev->iobase, MPC624_SIZE);
-
-	return 0;
-}
-
 /* Timeout 200ms */
 #define TIMEOUT 200
 
@@ -406,18 +281,117 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
 	return n;
 }
 
-static int __init driver_mpc624_init_module(void)
+static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
-	return comedi_driver_register(&driver_mpc624);
+	struct comedi_subdevice *s;
+	unsigned long iobase;
+
+	iobase = it->options[0];
+	printk(KERN_INFO "comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
+	if (request_region(iobase, MPC624_SIZE, "mpc624") == NULL) {
+		printk(KERN_ERR "I/O port(s) in use\n");
+		return -EIO;
+	}
+
+	dev->iobase = iobase;
+	dev->board_name = "mpc624";
+
+	/*  Private structure initialization */
+	if (alloc_private(dev, sizeof(struct skel_private)) < 0)
+		return -ENOMEM;
+
+	switch (it->options[1]) {
+	case 0:
+		devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
+		printk(KERN_INFO "3.52 kHz, ");
+		break;
+	case 1:
+		devpriv->ulConvertionRate = MPC624_SPEED_1_76_kHz;
+		printk(KERN_INFO "1.76 kHz, ");
+		break;
+	case 2:
+		devpriv->ulConvertionRate = MPC624_SPEED_880_Hz;
+		printk(KERN_INFO "880 Hz, ");
+		break;
+	case 3:
+		devpriv->ulConvertionRate = MPC624_SPEED_440_Hz;
+		printk(KERN_INFO "440 Hz, ");
+		break;
+	case 4:
+		devpriv->ulConvertionRate = MPC624_SPEED_220_Hz;
+		printk(KERN_INFO "220 Hz, ");
+		break;
+	case 5:
+		devpriv->ulConvertionRate = MPC624_SPEED_110_Hz;
+		printk(KERN_INFO "110 Hz, ");
+		break;
+	case 6:
+		devpriv->ulConvertionRate = MPC624_SPEED_55_Hz;
+		printk(KERN_INFO "55 Hz, ");
+		break;
+	case 7:
+		devpriv->ulConvertionRate = MPC624_SPEED_27_5_Hz;
+		printk(KERN_INFO "27.5 Hz, ");
+		break;
+	case 8:
+		devpriv->ulConvertionRate = MPC624_SPEED_13_75_Hz;
+		printk(KERN_INFO "13.75 Hz, ");
+		break;
+	case 9:
+		devpriv->ulConvertionRate = MPC624_SPEED_6_875_Hz;
+		printk(KERN_INFO "6.875 Hz, ");
+		break;
+	default:
+		printk
+		    (KERN_ERR "illegal conversion rate setting!"
+			" Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
+		devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
+	}
+
+	/*  Subdevices structures */
+	if (alloc_subdevices(dev, 1) < 0)
+		return -ENOMEM;
+
+	s = dev->subdevices + 0;
+	s->type = COMEDI_SUBD_AI;
+	s->subdev_flags = SDF_READABLE | SDF_DIFF;
+	s->n_chan = 8;
+	switch (it->options[1]) {
+	default:
+		s->maxdata = 0x3FFFFFFF;
+		printk(KERN_INFO "30 bit, ");
+	}
+
+	switch (it->options[1]) {
+	case 0:
+		s->range_table = &range_mpc624_bipolar1;
+		printk(KERN_INFO "1.01V]: ");
+		break;
+	default:
+		s->range_table = &range_mpc624_bipolar10;
+		printk(KERN_INFO "10.1V]: ");
+	}
+	s->len_chanlist = 1;
+	s->insn_read = mpc624_ai_rinsn;
+
+	printk(KERN_INFO "attached\n");
+
+	return 1;
 }
 
-static void __exit driver_mpc624_cleanup_module(void)
+static void mpc624_detach(struct comedi_device *dev)
 {
-	comedi_driver_unregister(&driver_mpc624);
+	if (dev->iobase)
+		release_region(dev->iobase, MPC624_SIZE);
 }
 
-module_init(driver_mpc624_init_module);
-module_exit(driver_mpc624_cleanup_module);
+static struct comedi_driver mpc624_driver = {
+	.driver_name	= "mpc624",
+	.module		= THIS_MODULE,
+	.attach		= mpc624_attach,
+	.detach		= mpc624_detach
+};
+module_comedi_driver(mpc624_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/mpc8260cpm.c b/drivers/staging/comedi/drivers/mpc8260cpm.c
index 5f6816a3fe8c..364470e4458f 100644
--- a/drivers/staging/comedi/drivers/mpc8260cpm.c
+++ b/drivers/staging/comedi/drivers/mpc8260cpm.c
@@ -46,75 +46,6 @@ struct mpc8260cpm_private {
 
 #define devpriv ((struct mpc8260cpm_private *)dev->private)
 
-static int mpc8260cpm_attach(struct comedi_device *dev,
-			     struct comedi_devconfig *it);
-static int mpc8260cpm_detach(struct comedi_device *dev);
-static struct comedi_driver driver_mpc8260cpm = {
-	.driver_name = "mpc8260cpm",
-	.module = THIS_MODULE,
-	.attach = mpc8260cpm_attach,
-	.detach = mpc8260cpm_detach,
-};
-
-static int __init driver_mpc8260cpm_init_module(void)
-{
-	return comedi_driver_register(&driver_mpc8260cpm);
-}
-
-static void __exit driver_mpc8260cpm_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_mpc8260cpm);
-}
-
-module_init(driver_mpc8260cpm_init_module);
-module_exit(driver_mpc8260cpm_cleanup_module);
-
-static int mpc8260cpm_dio_config(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data);
-static int mpc8260cpm_dio_bits(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-
-static int mpc8260cpm_attach(struct comedi_device *dev,
-			     struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int i;
-
-	printk("comedi%d: mpc8260cpm: ", dev->minor);
-
-	dev->board_ptr = mpc8260cpm_boards + dev->board;
-
-	dev->board_name = thisboard->name;
-
-	if (alloc_private(dev, sizeof(struct mpc8260cpm_private)) < 0)
-		return -ENOMEM;
-
-	if (alloc_subdevices(dev, 4) < 0)
-		return -ENOMEM;
-
-	for (i = 0; i < 4; i++) {
-		s = dev->subdevices + i;
-		s->type = COMEDI_SUBD_DIO;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->n_chan = 32;
-		s->maxdata = 1;
-		s->range_table = &range_digital;
-		s->insn_config = mpc8260cpm_dio_config;
-		s->insn_bits = mpc8260cpm_dio_bits;
-	}
-
-	return 1;
-}
-
-static int mpc8260cpm_detach(struct comedi_device *dev)
-{
-	printk("comedi%d: mpc8260cpm: remove\n", dev->minor);
-
-	return 0;
-}
-
 static unsigned long *cpm_pdat(int port)
 {
 	switch (port) {
@@ -184,3 +115,48 @@ static int mpc8260cpm_dio_bits(struct comedi_device *dev,
 
 	return 2;
 }
+
+static int mpc8260cpm_attach(struct comedi_device *dev,
+			     struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int i;
+
+	printk("comedi%d: mpc8260cpm: ", dev->minor);
+
+	dev->board_ptr = mpc8260cpm_boards + dev->board;
+
+	dev->board_name = thisboard->name;
+
+	if (alloc_private(dev, sizeof(struct mpc8260cpm_private)) < 0)
+		return -ENOMEM;
+
+	if (alloc_subdevices(dev, 4) < 0)
+		return -ENOMEM;
+
+	for (i = 0; i < 4; i++) {
+		s = dev->subdevices + i;
+		s->type = COMEDI_SUBD_DIO;
+		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+		s->n_chan = 32;
+		s->maxdata = 1;
+		s->range_table = &range_digital;
+		s->insn_config = mpc8260cpm_dio_config;
+		s->insn_bits = mpc8260cpm_dio_bits;
+	}
+
+	return 1;
+}
+
+static void mpc8260cpm_detach(struct comedi_device *dev)
+{
+	/* Nothing to cleanup */
+}
+
+static struct comedi_driver mpc8260cpm_driver = {
+	.driver_name	= "mpc8260cpm",
+	.module		= THIS_MODULE,
+	.attach		= mpc8260cpm_attach,
+	.detach		= mpc8260cpm_detach,
+};
+module_comedi_driver(mpc8260cpm_driver);
diff --git a/drivers/staging/comedi/drivers/multiq3.c b/drivers/staging/comedi/drivers/multiq3.c
index dace902d3bce..e951e73d66f5 100644
--- a/drivers/staging/comedi/drivers/multiq3.c
+++ b/drivers/staging/comedi/drivers/multiq3.c
@@ -83,29 +83,6 @@ Devices: [Quanser Consulting] MultiQ-3 (multiq3)
 
 #define MULTIQ3_TIMEOUT 30
 
-static int multiq3_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int multiq3_detach(struct comedi_device *dev);
-static struct comedi_driver driver_multiq3 = {
-	.driver_name = "multiq3",
-	.module = THIS_MODULE,
-	.attach = multiq3_attach,
-	.detach = multiq3_detach,
-};
-
-static int __init driver_multiq3_init_module(void)
-{
-	return comedi_driver_register(&driver_multiq3);
-}
-
-static void __exit driver_multiq3_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_multiq3);
-}
-
-module_init(driver_multiq3_init_module);
-module_exit(driver_multiq3_cleanup_module);
-
 struct multiq3_private {
 	unsigned int ao_readback[2];
 };
@@ -338,18 +315,22 @@ static int multiq3_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int multiq3_detach(struct comedi_device *dev)
+static void multiq3_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: multiq3: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, MULTIQ3_SIZE);
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
-	return 0;
 }
 
+static struct comedi_driver multiq3_driver = {
+	.driver_name	= "multiq3",
+	.module		= THIS_MODULE,
+	.attach		= multiq3_attach,
+	.detach		= multiq3_detach,
+};
+module_comedi_driver(multiq3_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c
index 54741c9e1af5..b02aa0efcd86 100644
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -78,7 +78,7 @@ Updated: Sat, 25 Jan 2003 13:24:40 -0800
 
 static int ni6527_attach(struct comedi_device *dev,
 			 struct comedi_devconfig *it);
-static int ni6527_detach(struct comedi_device *dev);
+static void ni6527_detach(struct comedi_device *dev);
 static struct comedi_driver driver_ni6527 = {
 	.driver_name = "ni6527",
 	.module = THIS_MODULE,
@@ -449,19 +449,15 @@ static int ni6527_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int ni6527_detach(struct comedi_device *dev)
+static void ni6527_detach(struct comedi_device *dev)
 {
 	if (devpriv && devpriv->mite && devpriv->mite->daq_io_addr)
 		writeb(0x00,
 		       devpriv->mite->daq_io_addr + Master_Interrupt_Control);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (devpriv && devpriv->mite)
 		mite_unsetup(devpriv->mite);
-
-	return 0;
 }
 
 static int ni6527_find_device(struct comedi_device *dev, int bus, int slot)
@@ -493,7 +489,7 @@ static int ni6527_find_device(struct comedi_device *dev, int bus, int slot)
 static int __devinit driver_ni6527_pci_probe(struct pci_dev *dev,
 					     const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_ni6527.driver_name);
+	return comedi_pci_auto_config(dev, &driver_ni6527);
 }
 
 static void __devexit driver_ni6527_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index 403fc0997d37..0d27a9323bc0 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -111,7 +111,7 @@ static inline unsigned Filter_Enable(unsigned port)
 
 static int ni_65xx_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it);
-static int ni_65xx_detach(struct comedi_device *dev);
+static void ni_65xx_detach(struct comedi_device *dev);
 static struct comedi_driver driver_ni_65xx = {
 	.driver_name = "ni_65xx",
 	.module = THIS_MODULE,
@@ -784,7 +784,7 @@ static int ni_65xx_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int ni_65xx_detach(struct comedi_device *dev)
+static void ni_65xx_detach(struct comedi_device *dev)
 {
 	if (private(dev) && private(dev)->mite
 	    && private(dev)->mite->daq_io_addr) {
@@ -792,10 +792,8 @@ static int ni_65xx_detach(struct comedi_device *dev)
 		       private(dev)->mite->daq_io_addr +
 		       Master_Interrupt_Control);
 	}
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (private(dev)) {
 		unsigned i;
 		for (i = 0; i < dev->n_subdevices; ++i) {
@@ -805,7 +803,6 @@ static int ni_65xx_detach(struct comedi_device *dev)
 		if (private(dev)->mite)
 			mite_unsetup(private(dev)->mite);
 	}
-	return 0;
 }
 
 static int ni_65xx_find_device(struct comedi_device *dev, int bus, int slot)
@@ -837,7 +834,7 @@ static int ni_65xx_find_device(struct comedi_device *dev, int bus, int slot)
 static int __devinit driver_ni_65xx_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_ni_65xx.driver_name);
+	return comedi_pci_auto_config(dev, &driver_ni_65xx);
 }
 
 static void __devexit driver_ni_65xx_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c
index 35f3a4749825..8c40730e296a 100644
--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -458,7 +458,7 @@ static inline const struct ni_660x_board *board(struct comedi_device *dev)
 
 static int ni_660x_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it);
-static int ni_660x_detach(struct comedi_device *dev);
+static void ni_660x_detach(struct comedi_device *dev);
 static void init_tio_chip(struct comedi_device *dev, int chipset);
 static void ni_660x_select_pfi_output(struct comedi_device *dev,
 				      unsigned pfi_channel,
@@ -474,7 +474,7 @@ static struct comedi_driver driver_ni_660x = {
 static int __devinit driver_ni_660x_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_ni_660x.driver_name);
+	return comedi_pci_auto_config(dev, &driver_ni_660x);
 }
 
 static void __devexit driver_ni_660x_pci_remove(struct pci_dev *dev)
@@ -761,7 +761,7 @@ static inline void ni_660x_write_register(struct comedi_device *dev,
 					  unsigned chip_index, unsigned bits,
 					  enum NI_660x_Register reg)
 {
-	void *const write_address =
+	void __iomem *write_address =
 	    private(dev)->mite->daq_io_addr + GPCT_OFFSET[chip_index] +
 	    registerData[reg].offset;
 
@@ -784,7 +784,7 @@ static inline unsigned ni_660x_read_register(struct comedi_device *dev,
 					     unsigned chip_index,
 					     enum NI_660x_Register reg)
 {
-	void *const read_address =
+	void __iomem *read_address =
 	    private(dev)->mite->daq_io_addr + GPCT_OFFSET[chip_index] +
 	    registerData[reg].offset;
 
@@ -1188,14 +1188,10 @@ static int ni_660x_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int ni_660x_detach(struct comedi_device *dev)
+static void ni_660x_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: ni_660x: remove\n", dev->minor);
-
-	/* Free irq */
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (dev->private) {
 		if (private(dev)->counter_dev)
 			ni_gpct_device_destroy(private(dev)->counter_dev);
@@ -1204,7 +1200,6 @@ static int ni_660x_detach(struct comedi_device *dev)
 			mite_unsetup(private(dev)->mite);
 		}
 	}
-	return 0;
 }
 
 static int
diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c
index d8d91f90060e..a9cf94fd0c30 100644
--- a/drivers/staging/comedi/drivers/ni_670x.c
+++ b/drivers/staging/comedi/drivers/ni_670x.c
@@ -111,7 +111,7 @@ struct ni_670x_private {
 
 static int ni_670x_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it);
-static int ni_670x_detach(struct comedi_device *dev);
+static void ni_670x_detach(struct comedi_device *dev);
 
 static struct comedi_driver driver_ni_670x = {
 	.driver_name = "ni_670x",
@@ -123,7 +123,7 @@ static struct comedi_driver driver_ni_670x = {
 static int __devinit driver_ni_670x_pci_probe(struct pci_dev *dev,
 					      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_ni_670x.driver_name);
+	return comedi_pci_auto_config(dev, &driver_ni_670x);
 }
 
 static void __devexit driver_ni_670x_pci_remove(struct pci_dev *dev)
@@ -249,19 +249,13 @@ static int ni_670x_attach(struct comedi_device *dev,
 	return 1;
 }
 
-static int ni_670x_detach(struct comedi_device *dev)
+static void ni_670x_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: ni_670x: remove\n", dev->minor);
-
 	kfree(dev->subdevices[0].range_table_list);
-
 	if (dev->private && devpriv->mite)
 		mite_unsetup(devpriv->mite);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
-	return 0;
 }
 
 static int ni_670x_ao_winsn(struct comedi_device *dev,
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index c25e44c1905e..ae896a094150 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -171,46 +171,13 @@ struct a2150_private {
 
 #define devpriv ((struct a2150_private *)dev->private)
 
-static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int a2150_detach(struct comedi_device *dev);
 static int a2150_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
 
-static struct comedi_driver driver_a2150 = {
-	.driver_name = "ni_at_a2150",
-	.module = THIS_MODULE,
-	.attach = a2150_attach,
-	.detach = a2150_detach,
-};
-
-static irqreturn_t a2150_interrupt(int irq, void *d);
-static int a2150_ai_cmdtest(struct comedi_device *dev,
-			    struct comedi_subdevice *s, struct comedi_cmd *cmd);
-static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
-static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data);
 static int a2150_get_timing(struct comedi_device *dev, unsigned int *period,
 			    int flags);
-static int a2150_probe(struct comedi_device *dev);
 static int a2150_set_chanlist(struct comedi_device *dev,
 			      unsigned int start_channel,
 			      unsigned int num_channels);
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __init driver_a2150_init_module(void)
-{
-	return comedi_driver_register(&driver_a2150);
-}
-
-static void __exit driver_a2150_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_a2150);
-}
-
-module_init(driver_a2150_init_module);
-module_exit(driver_a2150_cleanup_module);
-
 #ifdef A2150_DEBUG
 
 static void ni_dump_regs(struct comedi_device *dev)
@@ -331,161 +298,6 @@ static irqreturn_t a2150_interrupt(int irq, void *d)
 	return IRQ_HANDLED;
 }
 
-/* probes board type, returns offset */
-static int a2150_probe(struct comedi_device *dev)
-{
-	int status = inw(dev->iobase + STATUS_REG);
-	return ID_BITS(status);
-}
-
-static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	unsigned long iobase = it->options[0];
-	unsigned int irq = it->options[1];
-	unsigned int dma = it->options[2];
-	static const int timeout = 2000;
-	int i;
-
-	printk("comedi%d: %s: io 0x%lx", dev->minor, driver_a2150.driver_name,
-	       iobase);
-	if (irq) {
-		printk(", irq %u", irq);
-	} else {
-		printk(", no irq");
-	}
-	if (dma) {
-		printk(", dma %u", dma);
-	} else {
-		printk(", no dma");
-	}
-	printk("\n");
-
-	/* allocate and initialize dev->private */
-	if (alloc_private(dev, sizeof(struct a2150_private)) < 0)
-		return -ENOMEM;
-
-	if (iobase == 0) {
-		printk(" io base address required\n");
-		return -EINVAL;
-	}
-
-	/* check if io addresses are available */
-	if (!request_region(iobase, A2150_SIZE, driver_a2150.driver_name)) {
-		printk(" I/O port conflict\n");
-		return -EIO;
-	}
-	dev->iobase = iobase;
-
-	/* grab our IRQ */
-	if (irq) {
-		/*  check that irq is supported */
-		if (irq < 3 || irq == 8 || irq == 13 || irq > 15) {
-			printk(" invalid irq line %u\n", irq);
-			return -EINVAL;
-		}
-		if (request_irq(irq, a2150_interrupt, 0,
-				driver_a2150.driver_name, dev)) {
-			printk("unable to allocate irq %u\n", irq);
-			return -EINVAL;
-		}
-		devpriv->irq_dma_bits |= IRQ_LVL_BITS(irq);
-		dev->irq = irq;
-	}
-	/*  initialize dma */
-	if (dma) {
-		if (dma == 4 || dma > 7) {
-			printk(" invalid dma channel %u\n", dma);
-			return -EINVAL;
-		}
-		if (request_dma(dma, driver_a2150.driver_name)) {
-			printk(" failed to allocate dma channel %u\n", dma);
-			return -EINVAL;
-		}
-		devpriv->dma = dma;
-		devpriv->dma_buffer =
-		    kmalloc(A2150_DMA_BUFFER_SIZE, GFP_KERNEL | GFP_DMA);
-		if (devpriv->dma_buffer == NULL)
-			return -ENOMEM;
-
-		disable_dma(dma);
-		set_dma_mode(dma, DMA_MODE_READ);
-
-		devpriv->irq_dma_bits |= DMA_CHAN_BITS(dma);
-	}
-
-	dev->board_ptr = a2150_boards + a2150_probe(dev);
-	dev->board_name = thisboard->name;
-
-	if (alloc_subdevices(dev, 1) < 0)
-		return -ENOMEM;
-
-	/* analog input subdevice */
-	s = dev->subdevices + 0;
-	dev->read_subdev = s;
-	s->type = COMEDI_SUBD_AI;
-	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_OTHER | SDF_CMD_READ;
-	s->n_chan = 4;
-	s->len_chanlist = 4;
-	s->maxdata = 0xffff;
-	s->range_table = &range_a2150;
-	s->do_cmd = a2150_ai_cmd;
-	s->do_cmdtest = a2150_ai_cmdtest;
-	s->insn_read = a2150_ai_rinsn;
-	s->cancel = a2150_cancel;
-
-	/* need to do this for software counting of completed conversions, to
-	 * prevent hardware count from stopping acquisition */
-	outw(HW_COUNT_DISABLE, dev->iobase + I8253_MODE_REG);
-
-	/*  set card's irq and dma levels */
-	outw(devpriv->irq_dma_bits, dev->iobase + IRQ_DMA_CNTRL_REG);
-
-	/*  reset and sync adc clock circuitry */
-	outw_p(DPD_BIT | APD_BIT, dev->iobase + CONFIG_REG);
-	outw_p(DPD_BIT, dev->iobase + CONFIG_REG);
-	/*  initialize configuration register */
-	devpriv->config_bits = 0;
-	outw(devpriv->config_bits, dev->iobase + CONFIG_REG);
-	/*  wait until offset calibration is done, then enable analog inputs */
-	for (i = 0; i < timeout; i++) {
-		if ((DCAL_BIT & inw(dev->iobase + STATUS_REG)) == 0)
-			break;
-		udelay(1000);
-	}
-	if (i == timeout) {
-		printk
-		    (" timed out waiting for offset calibration to complete\n");
-		return -ETIME;
-	}
-	devpriv->config_bits |= ENABLE0_BIT | ENABLE1_BIT;
-	outw(devpriv->config_bits, dev->iobase + CONFIG_REG);
-
-	return 0;
-};
-
-static int a2150_detach(struct comedi_device *dev)
-{
-	printk("comedi%d: %s: remove\n", dev->minor, driver_a2150.driver_name);
-
-	/* only free stuff if it has been allocated by _attach */
-	if (dev->iobase) {
-		/*  put board in power-down mode */
-		outw(APD_BIT | DPD_BIT, dev->iobase + CONFIG_REG);
-		release_region(dev->iobase, A2150_SIZE);
-	}
-
-	if (dev->irq)
-		free_irq(dev->irq, dev);
-	if (devpriv) {
-		if (devpriv->dma)
-			free_dma(devpriv->dma);
-		kfree(devpriv->dma_buffer);
-	}
-
-	return 0;
-};
-
 static int a2150_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	/*  disable dma on card */
@@ -539,7 +351,10 @@ static int a2150_ai_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 1;
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/*
+	 * step 2: make sure trigger sources are unique and mutually
+	 * compatible
+	 */
 
 	if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT)
 		err++;
@@ -771,7 +586,10 @@ static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	/*  start acquisition for soft trigger */
 	outw(0, dev->iobase + FIFO_START_REG);
 
-	/* there is a 35.6 sample delay for data to get through the antialias filter */
+	/*
+	 * there is a 35.6 sample delay for data to get through the
+	 * antialias filter
+	 */
 	for (n = 0; n < filter_delay; n++) {
 		for (i = 0; i < timeout; i++) {
 			if (inw(dev->iobase + STATUS_REG) & FNE_BIT)
@@ -812,8 +630,10 @@ static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	return n;
 }
 
-/* sets bits in devpriv->clock_bits to nearest approximation of requested period,
- * adjusts requested period to actual timing. */
+/*
+ * sets bits in devpriv->clock_bits to nearest approximation of requested
+ * period, adjusts requested period to actual timing.
+ */
 static int a2150_get_timing(struct comedi_device *dev, unsigned int *period,
 			    int flags)
 {
@@ -920,6 +740,162 @@ static int a2150_set_chanlist(struct comedi_device *dev,
 	return 0;
 }
 
+/* probes board type, returns offset */
+static int a2150_probe(struct comedi_device *dev)
+{
+	int status = inw(dev->iobase + STATUS_REG);
+	return ID_BITS(status);
+}
+
+static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	unsigned long iobase = it->options[0];
+	unsigned int irq = it->options[1];
+	unsigned int dma = it->options[2];
+	static const int timeout = 2000;
+	int i;
+
+	printk("comedi%d: %s: io 0x%lx", dev->minor, dev->driver->driver_name,
+	       iobase);
+	if (irq) {
+		printk(", irq %u", irq);
+	} else {
+		printk(", no irq");
+	}
+	if (dma) {
+		printk(", dma %u", dma);
+	} else {
+		printk(", no dma");
+	}
+	printk("\n");
+
+	/* allocate and initialize dev->private */
+	if (alloc_private(dev, sizeof(struct a2150_private)) < 0)
+		return -ENOMEM;
+
+	if (iobase == 0) {
+		printk(" io base address required\n");
+		return -EINVAL;
+	}
+
+	/* check if io addresses are available */
+	if (!request_region(iobase, A2150_SIZE, dev->driver->driver_name)) {
+		printk(" I/O port conflict\n");
+		return -EIO;
+	}
+	dev->iobase = iobase;
+
+	/* grab our IRQ */
+	if (irq) {
+		/*  check that irq is supported */
+		if (irq < 3 || irq == 8 || irq == 13 || irq > 15) {
+			printk(" invalid irq line %u\n", irq);
+			return -EINVAL;
+		}
+		if (request_irq(irq, a2150_interrupt, 0,
+				dev->driver->driver_name, dev)) {
+			printk("unable to allocate irq %u\n", irq);
+			return -EINVAL;
+		}
+		devpriv->irq_dma_bits |= IRQ_LVL_BITS(irq);
+		dev->irq = irq;
+	}
+	/*  initialize dma */
+	if (dma) {
+		if (dma == 4 || dma > 7) {
+			printk(" invalid dma channel %u\n", dma);
+			return -EINVAL;
+		}
+		if (request_dma(dma, dev->driver->driver_name)) {
+			printk(" failed to allocate dma channel %u\n", dma);
+			return -EINVAL;
+		}
+		devpriv->dma = dma;
+		devpriv->dma_buffer =
+		    kmalloc(A2150_DMA_BUFFER_SIZE, GFP_KERNEL | GFP_DMA);
+		if (devpriv->dma_buffer == NULL)
+			return -ENOMEM;
+
+		disable_dma(dma);
+		set_dma_mode(dma, DMA_MODE_READ);
+
+		devpriv->irq_dma_bits |= DMA_CHAN_BITS(dma);
+	}
+
+	dev->board_ptr = a2150_boards + a2150_probe(dev);
+	dev->board_name = thisboard->name;
+
+	if (alloc_subdevices(dev, 1) < 0)
+		return -ENOMEM;
+
+	/* analog input subdevice */
+	s = dev->subdevices + 0;
+	dev->read_subdev = s;
+	s->type = COMEDI_SUBD_AI;
+	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_OTHER | SDF_CMD_READ;
+	s->n_chan = 4;
+	s->len_chanlist = 4;
+	s->maxdata = 0xffff;
+	s->range_table = &range_a2150;
+	s->do_cmd = a2150_ai_cmd;
+	s->do_cmdtest = a2150_ai_cmdtest;
+	s->insn_read = a2150_ai_rinsn;
+	s->cancel = a2150_cancel;
+
+	/* need to do this for software counting of completed conversions, to
+	 * prevent hardware count from stopping acquisition */
+	outw(HW_COUNT_DISABLE, dev->iobase + I8253_MODE_REG);
+
+	/*  set card's irq and dma levels */
+	outw(devpriv->irq_dma_bits, dev->iobase + IRQ_DMA_CNTRL_REG);
+
+	/*  reset and sync adc clock circuitry */
+	outw_p(DPD_BIT | APD_BIT, dev->iobase + CONFIG_REG);
+	outw_p(DPD_BIT, dev->iobase + CONFIG_REG);
+	/*  initialize configuration register */
+	devpriv->config_bits = 0;
+	outw(devpriv->config_bits, dev->iobase + CONFIG_REG);
+	/*  wait until offset calibration is done, then enable analog inputs */
+	for (i = 0; i < timeout; i++) {
+		if ((DCAL_BIT & inw(dev->iobase + STATUS_REG)) == 0)
+			break;
+		udelay(1000);
+	}
+	if (i == timeout) {
+		printk
+		    (" timed out waiting for offset calibration to complete\n");
+		return -ETIME;
+	}
+	devpriv->config_bits |= ENABLE0_BIT | ENABLE1_BIT;
+	outw(devpriv->config_bits, dev->iobase + CONFIG_REG);
+
+	return 0;
+};
+
+static void a2150_detach(struct comedi_device *dev)
+{
+	if (dev->iobase) {
+		outw(APD_BIT | DPD_BIT, dev->iobase + CONFIG_REG);
+		release_region(dev->iobase, A2150_SIZE);
+	}
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+	if (devpriv) {
+		if (devpriv->dma)
+			free_dma(devpriv->dma);
+		kfree(devpriv->dma_buffer);
+	}
+};
+
+static struct comedi_driver ni_at_a2150_driver = {
+	.driver_name	= "ni_at_a2150",
+	.module		= THIS_MODULE,
+	.attach		= a2150_attach,
+	.detach		= a2150_detach,
+};
+module_comedi_driver(ni_at_a2150_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c
index 138dcc2275ab..c43dd8ada1da 100644
--- a/drivers/staging/comedi/drivers/ni_at_ao.c
+++ b/drivers/staging/comedi/drivers/ni_at_ao.c
@@ -157,17 +157,6 @@ struct atao_board {
 	int n_ao_chans;
 };
 
-static const struct atao_board atao_boards[] = {
-	{
-	 .name = "ai-ao-6",
-	 .n_ao_chans = 6,
-	 },
-	{
-	 .name = "ai-ao-10",
-	 .n_ao_chans = 10,
-	 },
-};
-
 #define thisboard ((struct atao_board *)dev->board_ptr)
 
 struct atao_private {
@@ -182,133 +171,6 @@ struct atao_private {
 
 #define devpriv ((struct atao_private *)dev->private)
 
-static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int atao_detach(struct comedi_device *dev);
-static struct comedi_driver driver_atao = {
-	.driver_name = "ni_at_ao",
-	.module = THIS_MODULE,
-	.attach = atao_attach,
-	.detach = atao_detach,
-	.board_name = &atao_boards[0].name,
-	.offset = sizeof(struct atao_board),
-	.num_names = ARRAY_SIZE(atao_boards),
-};
-
-static int __init driver_atao_init_module(void)
-{
-	return comedi_driver_register(&driver_atao);
-}
-
-static void __exit driver_atao_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_atao);
-}
-
-module_init(driver_atao_init_module);
-module_exit(driver_atao_cleanup_module);
-
-static void atao_reset(struct comedi_device *dev);
-
-static int atao_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-static int atao_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-static int atao_dio_insn_bits(struct comedi_device *dev,
-			      struct comedi_subdevice *s,
-			      struct comedi_insn *insn, unsigned int *data);
-static int atao_dio_insn_config(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-static int atao_calib_insn_read(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-static int atao_calib_insn_write(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data);
-
-static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	unsigned long iobase;
-	int ao_unipolar;
-
-	iobase = it->options[0];
-	if (iobase == 0)
-		iobase = 0x1c0;
-	ao_unipolar = it->options[3];
-
-	printk(KERN_INFO "comedi%d: ni_at_ao: 0x%04lx", dev->minor, iobase);
-
-	if (!request_region(iobase, ATAO_SIZE, "ni_at_ao")) {
-		printk(" I/O port conflict\n");
-		return -EIO;
-	}
-	dev->iobase = iobase;
-
-	/* dev->board_ptr = atao_probe(dev); */
-
-	dev->board_name = thisboard->name;
-
-	if (alloc_private(dev, sizeof(struct atao_private)) < 0)
-		return -ENOMEM;
-
-	if (alloc_subdevices(dev, 4) < 0)
-		return -ENOMEM;
-
-	s = dev->subdevices + 0;
-	/* analog output subdevice */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE;
-	s->n_chan = thisboard->n_ao_chans;
-	s->maxdata = (1 << 12) - 1;
-	if (ao_unipolar)
-		s->range_table = &range_unipolar10;
-	else
-		s->range_table = &range_bipolar10;
-	s->insn_write = &atao_ao_winsn;
-	s->insn_read = &atao_ao_rinsn;
-
-	s = dev->subdevices + 1;
-	/* digital i/o subdevice */
-	s->type = COMEDI_SUBD_DIO;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-	s->n_chan = 8;
-	s->maxdata = 1;
-	s->range_table = &range_digital;
-	s->insn_bits = atao_dio_insn_bits;
-	s->insn_config = atao_dio_insn_config;
-
-	s = dev->subdevices + 2;
-	/* caldac subdevice */
-	s->type = COMEDI_SUBD_CALIB;
-	s->subdev_flags = SDF_WRITABLE | SDF_INTERNAL;
-	s->n_chan = 21;
-	s->maxdata = 0xff;
-	s->insn_read = atao_calib_insn_read;
-	s->insn_write = atao_calib_insn_write;
-
-	s = dev->subdevices + 3;
-	/* eeprom subdevice */
-	/* s->type=COMEDI_SUBD_EEPROM; */
-	s->type = COMEDI_SUBD_UNUSED;
-
-	atao_reset(dev);
-
-	printk(KERN_INFO "\n");
-
-	return 0;
-}
-
-static int atao_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: atao: remove\n", dev->minor);
-
-	if (dev->iobase)
-		release_region(dev->iobase, ATAO_SIZE);
-
-	return 0;
-}
-
 static void atao_reset(struct comedi_device *dev)
 {
 	/* This is the reset sequence described in the manual */
@@ -471,6 +333,106 @@ static int atao_calib_insn_write(struct comedi_device *dev,
 	return insn->n;
 }
 
+static int atao_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	unsigned long iobase;
+	int ao_unipolar;
+
+	iobase = it->options[0];
+	if (iobase == 0)
+		iobase = 0x1c0;
+	ao_unipolar = it->options[3];
+
+	printk(KERN_INFO "comedi%d: ni_at_ao: 0x%04lx", dev->minor, iobase);
+
+	if (!request_region(iobase, ATAO_SIZE, "ni_at_ao")) {
+		printk(" I/O port conflict\n");
+		return -EIO;
+	}
+	dev->iobase = iobase;
+
+	/* dev->board_ptr = atao_probe(dev); */
+
+	dev->board_name = thisboard->name;
+
+	if (alloc_private(dev, sizeof(struct atao_private)) < 0)
+		return -ENOMEM;
+
+	if (alloc_subdevices(dev, 4) < 0)
+		return -ENOMEM;
+
+	s = dev->subdevices + 0;
+	/* analog output subdevice */
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_WRITABLE;
+	s->n_chan = thisboard->n_ao_chans;
+	s->maxdata = (1 << 12) - 1;
+	if (ao_unipolar)
+		s->range_table = &range_unipolar10;
+	else
+		s->range_table = &range_bipolar10;
+	s->insn_write = &atao_ao_winsn;
+	s->insn_read = &atao_ao_rinsn;
+
+	s = dev->subdevices + 1;
+	/* digital i/o subdevice */
+	s->type = COMEDI_SUBD_DIO;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+	s->n_chan = 8;
+	s->maxdata = 1;
+	s->range_table = &range_digital;
+	s->insn_bits = atao_dio_insn_bits;
+	s->insn_config = atao_dio_insn_config;
+
+	s = dev->subdevices + 2;
+	/* caldac subdevice */
+	s->type = COMEDI_SUBD_CALIB;
+	s->subdev_flags = SDF_WRITABLE | SDF_INTERNAL;
+	s->n_chan = 21;
+	s->maxdata = 0xff;
+	s->insn_read = atao_calib_insn_read;
+	s->insn_write = atao_calib_insn_write;
+
+	s = dev->subdevices + 3;
+	/* eeprom subdevice */
+	/* s->type=COMEDI_SUBD_EEPROM; */
+	s->type = COMEDI_SUBD_UNUSED;
+
+	atao_reset(dev);
+
+	printk(KERN_INFO "\n");
+
+	return 0;
+}
+
+static void atao_detach(struct comedi_device *dev)
+{
+	if (dev->iobase)
+		release_region(dev->iobase, ATAO_SIZE);
+}
+
+static const struct atao_board atao_boards[] = {
+	{
+		.name		= "ai-ao-6",
+		.n_ao_chans	= 6,
+	}, {
+		.name		= "ai-ao-10",
+		.n_ao_chans	= 10,
+	},
+};
+
+static struct comedi_driver ni_at_ao_driver = {
+	.driver_name	= "ni_at_ao",
+	.module		= THIS_MODULE,
+	.attach		= atao_attach,
+	.detach		= atao_detach,
+	.board_name	= &atao_boards[0].name,
+	.offset		= sizeof(struct atao_board),
+	.num_names	= ARRAY_SIZE(atao_boards),
+};
+module_comedi_driver(ni_at_ao_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_atmio.c b/drivers/staging/comedi/drivers/ni_atmio.c
index 647c228abfbf..6448373878ed 100644
--- a/drivers/staging/comedi/drivers/ni_atmio.c
+++ b/drivers/staging/comedi/drivers/ni_atmio.c
@@ -343,49 +343,8 @@ static struct pnp_device_id device_ids[] = {
 
 MODULE_DEVICE_TABLE(pnp, device_ids);
 
-static int ni_atmio_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int ni_atmio_detach(struct comedi_device *dev);
-static struct comedi_driver driver_atmio = {
-	.driver_name = "ni_atmio",
-	.module = THIS_MODULE,
-	.attach = ni_atmio_attach,
-	.detach = ni_atmio_detach,
-};
-
-static int __init driver_atmio_init_module(void)
-{
-	return comedi_driver_register(&driver_atmio);
-}
-
-static void __exit driver_atmio_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_atmio);
-}
-
-module_init(driver_atmio_init_module);
-module_exit(driver_atmio_cleanup_module);
-
 #include "ni_mio_common.c"
 
-static int ni_getboardtype(struct comedi_device *dev);
-
-/* clean up allocated resources */
-static int ni_atmio_detach(struct comedi_device *dev)
-{
-	mio_common_detach(dev);
-
-	if (dev->iobase)
-		release_region(dev->iobase, NI_SIZE);
-	if (dev->irq)
-		free_irq(dev->irq, dev);
-
-	if (devpriv->isapnp_dev)
-		pnp_device_detach(devpriv->isapnp_dev);
-
-	return 0;
-}
-
 static int ni_isapnp_find_board(struct pnp_dev **dev)
 {
 	struct pnp_dev *isapnp_dev = NULL;
@@ -424,6 +383,26 @@ static int ni_isapnp_find_board(struct pnp_dev **dev)
 	return 0;
 }
 
+static int ni_getboardtype(struct comedi_device *dev)
+{
+	int device_id = ni_read_eeprom(dev, 511);
+	int i;
+
+	for (i = 0; i < n_ni_boards; i++) {
+		if (ni_boards[i].device_id == device_id)
+			return i;
+
+	}
+	if (device_id == 255)
+		printk(" can't find board\n");
+	 else if (device_id == 0)
+		printk(" EEPROM read error (?) or device not found\n");
+	 else
+		printk(" unknown device ID %d -- contact author\n", device_id);
+
+	return -1;
+}
+
 static int ni_atmio_attach(struct comedi_device *dev,
 			   struct comedi_devconfig *it)
 {
@@ -518,22 +497,21 @@ static int ni_atmio_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int ni_getboardtype(struct comedi_device *dev)
+static void ni_atmio_detach(struct comedi_device *dev)
 {
-	int device_id = ni_read_eeprom(dev, 511);
-	int i;
-
-	for (i = 0; i < n_ni_boards; i++) {
-		if (ni_boards[i].device_id == device_id)
-			return i;
-
-	}
-	if (device_id == 255)
-		printk(" can't find board\n");
-	 else if (device_id == 0)
-		printk(" EEPROM read error (?) or device not found\n");
-	 else
-		printk(" unknown device ID %d -- contact author\n", device_id);
-
-	return -1;
+	mio_common_detach(dev);
+	if (dev->iobase)
+		release_region(dev->iobase, NI_SIZE);
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+	if (devpriv->isapnp_dev)
+		pnp_device_detach(devpriv->isapnp_dev);
 }
+
+static struct comedi_driver ni_atmio_driver = {
+	.driver_name	= "ni_atmio",
+	.module		= THIS_MODULE,
+	.attach		= ni_atmio_attach,
+	.detach		= ni_atmio_detach,
+};
+module_comedi_driver(ni_atmio_driver);
diff --git a/drivers/staging/comedi/drivers/ni_atmio16d.c b/drivers/staging/comedi/drivers/ni_atmio16d.c
index 285b933551ab..4f6145326747 100644
--- a/drivers/staging/comedi/drivers/ni_atmio16d.c
+++ b/drivers/staging/comedi/drivers/ni_atmio16d.c
@@ -110,60 +110,8 @@ struct atmio16_board_t {
 	int has_8255;
 };
 
-static const struct atmio16_board_t atmio16_boards[] = {
-	{
-	 .name = "atmio16",
-	 .has_8255 = 0,
-	 },
-	{
-	 .name = "atmio16d",
-	 .has_8255 = 1,
-	 },
-};
-
-#define n_atmio16_boards ARRAY_SIZE(atmio16_boards)
-
 #define boardtype ((const struct atmio16_board_t *)dev->board_ptr)
 
-/* function prototypes */
-static int atmio16d_attach(struct comedi_device *dev,
-			   struct comedi_devconfig *it);
-static int atmio16d_detach(struct comedi_device *dev);
-static irqreturn_t atmio16d_interrupt(int irq, void *d);
-static int atmio16d_ai_cmdtest(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_cmd *cmd);
-static int atmio16d_ai_cmd(struct comedi_device *dev,
-			   struct comedi_subdevice *s);
-static int atmio16d_ai_cancel(struct comedi_device *dev,
-			      struct comedi_subdevice *s);
-static void reset_counters(struct comedi_device *dev);
-static void reset_atmio16d(struct comedi_device *dev);
-
-/* main driver struct */
-static struct comedi_driver driver_atmio16d = {
-	.driver_name = "atmio16",
-	.module = THIS_MODULE,
-	.attach = atmio16d_attach,
-	.detach = atmio16d_detach,
-	.board_name = &atmio16_boards[0].name,
-	.num_names = n_atmio16_boards,
-	.offset = sizeof(struct atmio16_board_t),
-};
-
-static int __init driver_atmio16d_init_module(void)
-{
-	return comedi_driver_register(&driver_atmio16d);
-}
-
-static void __exit driver_atmio16d_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_atmio16d);
-}
-
-module_init(driver_atmio16d_init_module);
-module_exit(driver_atmio16d_cleanup_module);
-
 /* range structs */
 static const struct comedi_lrange range_atmio16d_ai_10_bipolar = { 4, {
 								       BIP_RANGE
@@ -881,24 +829,38 @@ static int atmio16d_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int atmio16d_detach(struct comedi_device *dev)
+static void atmio16d_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: atmio16d: remove\n", dev->minor);
-
 	if (dev->subdevices && boardtype->has_8255)
 		subdev_8255_cleanup(dev, dev->subdevices + 3);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	reset_atmio16d(dev);
-
 	if (dev->iobase)
 		release_region(dev->iobase, ATMIO16D_SIZE);
-
-	return 0;
 }
 
+static const struct atmio16_board_t atmio16_boards[] = {
+	{
+		.name		= "atmio16",
+		.has_8255	= 0,
+	}, {
+		.name		= "atmio16d",
+		.has_8255	= 1,
+	},
+};
+
+static struct comedi_driver atmio16d_driver = {
+	.driver_name	= "atmio16",
+	.module		= THIS_MODULE,
+	.attach		= atmio16d_attach,
+	.detach		= atmio16d_detach,
+	.board_name	= &atmio16_boards[0].name,
+	.num_names	= ARRAY_SIZE(atmio16_boards),
+	.offset		= sizeof(struct atmio16_board_t),
+};
+module_comedi_driver(atmio16d_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index e2420123db87..75764e8d27eb 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -57,7 +57,7 @@ static struct pcmcia_device *pcmcia_cur_dev;
 
 static int dio700_attach(struct comedi_device *dev,
 			 struct comedi_devconfig *it);
-static int dio700_detach(struct comedi_device *dev);
+static void dio700_detach(struct comedi_device *dev);
 
 enum dio700_bustype { pcmcia_bustype };
 
@@ -419,19 +419,14 @@ static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 };
 
-static int dio700_detach(struct comedi_device *dev)
+static void dio700_detach(struct comedi_device *dev)
 {
-	printk(KERN_ERR "comedi%d: ni_daq_700: cs-remove\n", dev->minor);
-
 	if (dev->subdevices)
 		subdev_700_cleanup(dev, dev->subdevices + 0);
-
 	if (thisboard->bustype != pcmcia_bustype && dev->iobase)
 		release_region(dev->iobase, DIO700_SIZE);
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
-	return 0;
 };
 
 static void dio700_config(struct pcmcia_device *link);
@@ -472,18 +467,12 @@ static int dio700_cs_attach(struct pcmcia_device *link)
 
 static void dio700_cs_detach(struct pcmcia_device *link)
 {
-
-	printk(KERN_INFO "ni_daq_700: cs-detach!\n");
-
-	dev_dbg(&link->dev, "dio700_cs_detach\n");
-
 	((struct local_info_t *)link->priv)->stop = 1;
 	dio700_release(link);
 
 	/* This points to the parent struct local_info_t struct */
 	kfree(link->priv);
-
-}				/* dio700_cs_detach */
+}
 
 static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
 				void *priv_data)
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index c0423a8c3e36..493a22788637 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -57,7 +57,7 @@ static struct pcmcia_device *pcmcia_cur_dev;
 #define DIO24_SIZE 4		/*  size of io region used by board */
 
 static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int dio24_detach(struct comedi_device *dev);
+static void dio24_detach(struct comedi_device *dev);
 
 enum dio24_bustype { pcmcia_bustype };
 
@@ -168,19 +168,14 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 };
 
-static int dio24_detach(struct comedi_device *dev)
+static void dio24_detach(struct comedi_device *dev)
 {
-	dev_info(dev->hw_dev, "comedi%d: ni_daq_dio24: remove\n", dev->minor);
-
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 0);
-
 	if (thisboard->bustype != pcmcia_bustype && dev->iobase)
 		release_region(dev->iobase, DIO24_SIZE);
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
-	return 0;
 };
 
 static void dio24_config(struct pcmcia_device *link);
@@ -221,18 +216,12 @@ static int dio24_cs_attach(struct pcmcia_device *link)
 
 static void dio24_cs_detach(struct pcmcia_device *link)
 {
-
-	printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO - cs-detach!\n");
-
-	dev_dbg(&link->dev, "dio24_cs_detach\n");
-
 	((struct local_info_t *)link->priv)->stop = 1;
 	dio24_release(link);
 
 	/* This points to the parent local_info_t struct */
 	kfree(link->priv);
-
-}				/* dio24_cs_detach */
+}
 
 static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
 				void *priv_data)
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 721b2be22500..53349777246b 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -805,13 +805,10 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot)
 }
 #endif
 
-int labpc_common_detach(struct comedi_device *dev)
+void labpc_common_detach(struct comedi_device *dev)
 {
-	printk(KERN_ERR "comedi%d: ni_labpc: detach\n", dev->minor);
-
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
-
 #ifdef CONFIG_ISA_DMA_API
 	/* only free stuff if it has been allocated by _attach */
 	kfree(devpriv->dma_buffer);
@@ -826,8 +823,6 @@ int labpc_common_detach(struct comedi_device *dev)
 	if (devpriv->mite)
 		mite_unsetup(devpriv->mite);
 #endif
-
-	return 0;
 };
 EXPORT_SYMBOL_GPL(labpc_common_detach);
 
@@ -2141,7 +2136,7 @@ static void write_caldac(struct comedi_device *dev, unsigned int channel,
 static int __devinit driver_labpc_pci_probe(struct pci_dev *dev,
 					    const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_labpc.driver_name);
+	return comedi_pci_auto_config(dev, &driver_labpc);
 }
 
 static void __devexit driver_labpc_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ni_labpc.h b/drivers/staging/comedi/drivers/ni_labpc.h
index 422cee58a967..e052ed3ba544 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.h
+++ b/drivers/staging/comedi/drivers/ni_labpc.h
@@ -103,7 +103,7 @@ struct labpc_private {
 
 int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 			unsigned int irq, unsigned int dma);
-int labpc_common_detach(struct comedi_device *dev);
+void labpc_common_detach(struct comedi_device *dev);
 
 extern const int labpc_1200_is_unipolar[];
 extern const int labpc_1200_ai_gain_bits[];
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index ff3840544dd4..dbb61b6b3ed1 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -188,21 +188,13 @@ static int labpc_cs_attach(struct pcmcia_device *link)
 
 static void labpc_cs_detach(struct pcmcia_device *link)
 {
-	dev_dbg(&link->dev, "labpc_cs_detach\n");
-
-	/*
-	   If the device is currently configured and active, we won't
-	   actually delete it yet.  Instead, it is marked so that when
-	   the release() function is called, that will trigger a proper
-	   detach().
-	 */
 	((struct local_info_t *)link->priv)->stop = 1;
 	labpc_release(link);
 
 	/* This points to the parent local_info_t struct (may be null) */
 	kfree(link->priv);
 
-}				/* labpc_cs_detach */
+}
 
 static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
 				void *priv_data)
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index 53ec24bb6dce..b85765d266c2 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -227,7 +227,7 @@ static uint16_t mio_cs_win_in(struct comedi_device *dev, int addr)
 
 static int mio_cs_attach(struct comedi_device *dev,
 			 struct comedi_devconfig *it);
-static int mio_cs_detach(struct comedi_device *dev);
+static void mio_cs_detach(struct comedi_device *dev);
 static struct comedi_driver driver_ni_mio_cs = {
 	.driver_name = "ni_mio_cs",
 	.module = THIS_MODULE,
@@ -240,18 +240,11 @@ static struct comedi_driver driver_ni_mio_cs = {
 static int ni_getboardtype(struct comedi_device *dev,
 			   struct pcmcia_device *link);
 
-/* clean up allocated resources */
-/* called when driver is removed */
-static int mio_cs_detach(struct comedi_device *dev)
+static void mio_cs_detach(struct comedi_device *dev)
 {
 	mio_common_detach(dev);
-
-	/* PCMCIA layer frees the IO region */
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
-	return 0;
 }
 
 static void mio_cs_config(struct pcmcia_device *link);
@@ -276,8 +269,6 @@ static void cs_release(struct pcmcia_device *link)
 
 static void cs_detach(struct pcmcia_device *link)
 {
-	DPRINTK("cs_detach(link=%p)\n", link);
-
 	cs_release(link);
 }
 
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index 1df8fcbcd108..37b700830e21 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -293,18 +293,9 @@ enum FPGA_Control_Bits {
 #define IntEn (TransferReady|CountExpired|Waited|PrimaryTC|SecondaryTC)
 #endif
 
-static int nidio_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int nidio_detach(struct comedi_device *dev);
 static int ni_pcidio_cancel(struct comedi_device *dev,
 			    struct comedi_subdevice *s);
 
-static struct comedi_driver driver_pcidio = {
-	.driver_name = "ni_pcidio",
-	.module = THIS_MODULE,
-	.attach = nidio_attach,
-	.detach = nidio_detach,
-};
-
 struct nidio_board {
 
 	int dev_id;
@@ -381,22 +372,6 @@ static const struct nidio_board nidio_boards[] = {
 #define n_nidio_boards ARRAY_SIZE(nidio_boards)
 #define this_board ((const struct nidio_board *)dev->board_ptr)
 
-static DEFINE_PCI_DEVICE_TABLE(ni_pcidio_pci_table) = {
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1150)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1320)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x12b0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x0160)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1630)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x13c0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x0400)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1250)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x17d0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1800)},
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, ni_pcidio_pci_table);
-
 struct nidio96_private {
 	struct mite_struct *mite;
 	int boardtype;
@@ -414,7 +389,6 @@ static int ni_pcidio_cmdtest(struct comedi_device *dev,
 static int ni_pcidio_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
 static int ni_pcidio_inttrig(struct comedi_device *dev,
 			     struct comedi_subdevice *s, unsigned int trignum);
-static int nidio_find_device(struct comedi_device *dev, int bus, int slot);
 static int ni_pcidio_ns_to_timer(int *nanosec, int round_mode);
 static int setup_mite_dma(struct comedi_device *dev,
 			  struct comedi_subdevice *s);
@@ -1205,6 +1179,33 @@ static int pci_6534_upload_firmware(struct comedi_device *dev, int options[])
 	return 0;
 }
 
+static int nidio_find_device(struct comedi_device *dev, int bus, int slot)
+{
+	struct mite_struct *mite;
+	int i;
+
+	for (mite = mite_devices; mite; mite = mite->next) {
+		if (mite->used)
+			continue;
+		if (bus || slot) {
+			if (bus != mite->pcidev->bus->number ||
+			    slot != PCI_SLOT(mite->pcidev->devfn))
+				continue;
+		}
+		for (i = 0; i < n_nidio_boards; i++) {
+			if (mite_device_id(mite) == nidio_boards[i].dev_id) {
+				dev->board_ptr = nidio_boards + i;
+				devpriv->mite = mite;
+
+				return 0;
+			}
+		}
+	}
+	printk(KERN_WARNING "no device found\n");
+	mite_list_devices();
+	return -EIO;
+}
+
 static int nidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
@@ -1306,7 +1307,7 @@ static int nidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int nidio_detach(struct comedi_device *dev)
+static void nidio_detach(struct comedi_device *dev)
 {
 	int i;
 
@@ -1314,10 +1315,8 @@ static int nidio_detach(struct comedi_device *dev)
 		for (i = 0; i < this_board->n_8255; i++)
 			subdev_8255_cleanup(dev, dev->subdevices + i);
 	}
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (devpriv) {
 		if (devpriv->di_mite_ring) {
 			mite_free_ring(devpriv->di_mite_ring);
@@ -1326,73 +1325,48 @@ static int nidio_detach(struct comedi_device *dev)
 		if (devpriv->mite)
 			mite_unsetup(devpriv->mite);
 	}
-	return 0;
 }
 
-static int nidio_find_device(struct comedi_device *dev, int bus, int slot)
-{
-	struct mite_struct *mite;
-	int i;
-
-	for (mite = mite_devices; mite; mite = mite->next) {
-		if (mite->used)
-			continue;
-		if (bus || slot) {
-			if (bus != mite->pcidev->bus->number ||
-			    slot != PCI_SLOT(mite->pcidev->devfn))
-				continue;
-		}
-		for (i = 0; i < n_nidio_boards; i++) {
-			if (mite_device_id(mite) == nidio_boards[i].dev_id) {
-				dev->board_ptr = nidio_boards + i;
-				devpriv->mite = mite;
-
-				return 0;
-			}
-		}
-	}
-	printk(KERN_WARNING "no device found\n");
-	mite_list_devices();
-	return -EIO;
-}
+static struct comedi_driver ni_pcidio_driver = {
+	.driver_name	= "ni_pcidio",
+	.module		= THIS_MODULE,
+	.attach		= nidio_attach,
+	.detach		= nidio_detach,
+};
 
-static int __devinit driver_pcidio_pci_probe(struct pci_dev *dev,
-					     const struct pci_device_id *ent)
+static int __devinit ni_pcidio_pci_probe(struct pci_dev *dev,
+					 const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_pcidio.driver_name);
+	return comedi_pci_auto_config(dev, &ni_pcidio_driver);
 }
 
-static void __devexit driver_pcidio_pci_remove(struct pci_dev *dev)
+static void __devexit ni_pcidio_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver driver_pcidio_pci_driver = {
-	.id_table = ni_pcidio_pci_table,
-	.probe = &driver_pcidio_pci_probe,
-	.remove = __devexit_p(&driver_pcidio_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(ni_pcidio_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1150) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1320) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x12b0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x0160) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1630) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x13c0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x0400) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1250) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x17d0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1800) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, ni_pcidio_pci_table);
 
-static int __init driver_pcidio_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pcidio);
-	if (retval < 0)
-		return retval;
-
-	driver_pcidio_pci_driver.name = (char *)driver_pcidio.driver_name;
-	return pci_register_driver(&driver_pcidio_pci_driver);
-}
-
-static void __exit driver_pcidio_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pcidio_pci_driver);
-	comedi_driver_unregister(&driver_pcidio);
-}
-
-module_init(driver_pcidio_init_module);
-module_exit(driver_pcidio_cleanup_module);
+static struct pci_driver ni_pcidio_pci_driver = {
+	.name		= "ni_pcidio",
+	.id_table	= ni_pcidio_pci_table,
+	.probe		= ni_pcidio_pci_probe,
+	.remove		= __devexit_p(ni_pcidio_pci_remove),
+};
+module_comedi_pci_driver(ni_pcidio_driver, ni_pcidio_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
index 27baefa32b17..3974c0d98d2a 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -129,66 +129,6 @@ Bugs:
 
 #define DRV_NAME "ni_pcimio"
 
-/* The following two tables must be in the same order */
-static DEFINE_PCI_DEVICE_TABLE(ni_pci_table) = {
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x0162)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1170)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1180)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1190)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x11b0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x11c0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x11d0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1270)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1330)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1340)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1350)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x14e0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x14f0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1580)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x15b0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1880)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1870)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x18b0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x18c0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2410)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2420)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2430)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2890)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x28c0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2a60)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2a70)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2a80)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2ab0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2b80)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2b90)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2c80)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2ca0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70aa)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70ab)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70ac)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70af)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70b0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70b4)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70b6)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70b7)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70b8)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70bc)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70bd)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70bf)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70c0)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70f2)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x710d)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x716c)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x716d)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x717f)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x71bc)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x717d)},
-	{PCI_DEVICE(PCI_VENDOR_ID_NI, 0x72e8)},
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, ni_pci_table);
-
 /* These are not all the possible ao ranges for 628x boards.
  They can do OFFSET +- REFERENCE where OFFSET can be
  0V, 5V, APFI<0,1>, or AO<0...3> and RANGE can
@@ -1250,54 +1190,6 @@ static const struct ni_board_struct ni_boards[] = {
 
 #define n_pcimio_boards ARRAY_SIZE(ni_boards)
 
-static int pcimio_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcimio_detach(struct comedi_device *dev);
-static struct comedi_driver driver_pcimio = {
-	.driver_name = DRV_NAME,
-	.module = THIS_MODULE,
-	.attach = pcimio_attach,
-	.detach = pcimio_detach,
-};
-
-static int __devinit driver_pcimio_pci_probe(struct pci_dev *dev,
-					     const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, driver_pcimio.driver_name);
-}
-
-static void __devexit driver_pcimio_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_pcimio_pci_driver = {
-	.id_table = ni_pci_table,
-	.probe = &driver_pcimio_pci_probe,
-	.remove = __devexit_p(&driver_pcimio_pci_remove)
-};
-
-static int __init driver_pcimio_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_pcimio);
-	if (retval < 0)
-		return retval;
-
-	driver_pcimio_pci_driver.name = (char *)driver_pcimio.driver_name;
-	return pci_register_driver(&driver_pcimio_pci_driver);
-}
-
-static void __exit driver_pcimio_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_pcimio_pci_driver);
-	comedi_driver_unregister(&driver_pcimio);
-}
-
-module_init(driver_pcimio_init_module);
-module_exit(driver_pcimio_cleanup_module);
-
 struct ni_private {
 NI_PRIVATE_COMMON};
 #define devpriv ((struct ni_private *)dev->private)
@@ -1681,13 +1573,11 @@ static void init_6143(struct comedi_device *dev)
 	ni_writew(devpriv->ai_calib_source, Calibration_Channel_6143);
 }
 
-/* cleans up allocated resources */
-static int pcimio_detach(struct comedi_device *dev)
+static void pcimio_detach(struct comedi_device *dev)
 {
 	mio_common_detach(dev);
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (dev->private) {
 		mite_free_ring(devpriv->ai_mite_ring);
 		mite_free_ring(devpriv->ao_mite_ring);
@@ -1697,8 +1587,6 @@ static int pcimio_detach(struct comedi_device *dev)
 		if (devpriv->mite)
 			mite_unsetup(devpriv->mite);
 	}
-
-	return 0;
 }
 
 static int pcimio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
@@ -1874,6 +1762,90 @@ static int pcimio_dio_change(struct comedi_device *dev,
 	return 0;
 }
 
+static struct comedi_driver ni_pcimio_driver = {
+	.driver_name	= "ni_pcimio",
+	.module		= THIS_MODULE,
+	.attach		= pcimio_attach,
+	.detach		= pcimio_detach,
+};
+
+static int __devinit ni_pcimio_pci_probe(struct pci_dev *dev,
+					 const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &ni_pcimio_driver);
+}
+
+static void __devexit ni_pcimio_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(ni_pcimio_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x0162) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1170) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1180) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1190) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x11b0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x11c0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x11d0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1270) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1330) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1340) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1350) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x14e0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x14f0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1580) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x15b0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1880) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x1870) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x18b0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x18c0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2410) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2420) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2430) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2890) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x28c0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2a60) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2a70) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2a80) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2ab0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2b80) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2b90) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2c80) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x2ca0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70aa) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70ab) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70ac) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70af) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70b0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70b4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70b6) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70b7) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70b8) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70bc) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70bd) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70bf) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70c0) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x70f2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x710d) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x716c) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x716d) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x717f) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x71bc) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x717d) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NI, 0x72e8) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, ni_pcimio_pci_table);
+
+static struct pci_driver ni_pcimio_pci_driver = {
+	.name		= "ni_pcimio",
+	.id_table	= ni_pcimio_pci_table,
+	.probe		= ni_pcimio_pci_probe,
+	.remove		= __devexit_p(ni_pcimio_pci_remove)
+};
+module_comedi_pci_driver(ni_pcimio_driver, ni_pcimio_pci_driver)
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_tio_internal.h b/drivers/staging/comedi/drivers/ni_tio_internal.h
index c4ca53785832..5e00212aa022 100644
--- a/drivers/staging/comedi/drivers/ni_tio_internal.h
+++ b/drivers/staging/comedi/drivers/ni_tio_internal.h
@@ -362,8 +362,8 @@ static inline enum ni_gpct_register NITIO_Gi_ABZ_Reg(int counter_index)
 	return 0;
 }
 
-static inline enum ni_gpct_register NITIO_Gi_Interrupt_Acknowledge_Reg(int
-								       counter_index)
+static inline enum ni_gpct_register NITIO_Gi_Interrupt_Acknowledge_Reg(
+	int counter_index)
 {
 	switch (counter_index) {
 	case 0:
@@ -407,8 +407,8 @@ static inline enum ni_gpct_register NITIO_Gi_Status_Reg(int counter_index)
 	return 0;
 }
 
-static inline enum ni_gpct_register NITIO_Gi_Interrupt_Enable_Reg(int
-								  counter_index)
+static inline enum ni_gpct_register NITIO_Gi_Interrupt_Enable_Reg(
+	int counter_index)
 {
 	switch (counter_index) {
 	case 0:
@@ -472,15 +472,22 @@ enum Gi_Counting_Mode_Reg_Bits {
 	Gi_Index_Phase_LowA_HighB = 0x1 << Gi_Index_Phase_Bitshift,
 	Gi_Index_Phase_HighA_LowB = 0x2 << Gi_Index_Phase_Bitshift,
 	Gi_Index_Phase_HighA_HighB = 0x3 << Gi_Index_Phase_Bitshift,
-	Gi_HW_Arm_Enable_Bit = 0x80,	/* from m-series example code, not documented in 660x register level manual */
-	Gi_660x_HW_Arm_Select_Mask = 0x7 << Gi_HW_Arm_Select_Shift,	/* from m-series example code, not documented in 660x register level manual */
+	/* from m-series example code, not documented in 660x register level
+	 * manual */
+	Gi_HW_Arm_Enable_Bit = 0x80,
+	/* from m-series example code, not documented in 660x register level
+	 * manual */
+	Gi_660x_HW_Arm_Select_Mask = 0x7 << Gi_HW_Arm_Select_Shift,
 	Gi_660x_Prescale_X8_Bit = 0x1000,
 	Gi_M_Series_Prescale_X8_Bit = 0x2000,
 	Gi_M_Series_HW_Arm_Select_Mask = 0x1f << Gi_HW_Arm_Select_Shift,
-	/* must be set for clocks over 40MHz, which includes synchronous counting and quadrature modes */
+	/* must be set for clocks over 40MHz, which includes synchronous
+	 * counting and quadrature modes */
 	Gi_660x_Alternate_Sync_Bit = 0x2000,
 	Gi_M_Series_Alternate_Sync_Bit = 0x4000,
-	Gi_660x_Prescale_X2_Bit = 0x4000,	/* from m-series example code, not documented in 660x register level manual */
+	/* from m-series example code, not documented in 660x register level
+	 * manual */
+	Gi_660x_Prescale_X2_Bit = 0x4000,
 	Gi_M_Series_Prescale_X2_Bit = 0x8000,
 };
 
@@ -503,7 +510,8 @@ enum Gi_Mode_Bits {
 	Gi_Level_Gating_Bits = 0x1,
 	Gi_Rising_Edge_Gating_Bits = 0x2,
 	Gi_Falling_Edge_Gating_Bits = 0x3,
-	Gi_Gate_On_Both_Edges_Bit = 0x4,	/* used in conjunction with rising edge gating mode */
+	Gi_Gate_On_Both_Edges_Bit = 0x4,	/* used in conjunction with
+						 * rising edge gating mode */
 	Gi_Trigger_Mode_for_Edge_Gate_Mask = 0x18,
 	Gi_Edge_Gate_Starts_Stops_Bits = 0x0,
 	Gi_Edge_Gate_Stops_Starts_Bits = 0x8,
@@ -686,11 +694,10 @@ static inline unsigned Gi_Gate_Interrupt_Enable_Bit(unsigned counter_index)
 {
 	unsigned bit;
 
-	if (counter_index % 2) {
+	if (counter_index % 2)
 		bit = G1_Gate_Interrupt_Enable_Bit;
-	} else {
+	else
 		bit = G0_Gate_Interrupt_Enable_Bit;
-	}
 	return bit;
 }
 
@@ -748,8 +755,9 @@ static inline void ni_tio_set_bits_transient(struct ni_gpct *counter,
 }
 
 /* ni_tio_set_bits( ) is for safely writing to registers whose bits may be
-twiddled in interrupt context, or whose software copy may be read in interrupt context.
-*/
+ * twiddled in interrupt context, or whose software copy may be read in
+ * interrupt context.
+ */
 static inline void ni_tio_set_bits(struct ni_gpct *counter,
 				   enum ni_gpct_register register_index,
 				   unsigned bit_mask, unsigned bit_values)
diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c
index b44386a6b636..2e7753f988aa 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -148,42 +148,8 @@ struct pcl711_board {
 	const struct comedi_lrange *ai_range_type;
 };
 
-static const struct pcl711_board boardtypes[] = {
-	{"pcl711", 0, 0, 0, 5, 8, 1, 0, &range_bipolar5},
-	{"pcl711b", 1, 0, 0, 5, 8, 1, 7, &range_pcl711b_ai},
-	{"acl8112hg", 0, 1, 0, 12, 16, 2, 15, &range_acl8112hg_ai},
-	{"acl8112dg", 0, 1, 1, 9, 16, 2, 15, &range_acl8112dg_ai},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl711_board))
 #define this_board ((const struct pcl711_board *)dev->board_ptr)
 
-static int pcl711_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl711_detach(struct comedi_device *dev);
-static struct comedi_driver driver_pcl711 = {
-	.driver_name = "pcl711",
-	.module = THIS_MODULE,
-	.attach = pcl711_attach,
-	.detach = pcl711_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl711_board),
-};
-
-static int __init driver_pcl711_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl711);
-}
-
-static void __exit driver_pcl711_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl711);
-}
-
-module_init(driver_pcl711_init_module);
-module_exit(driver_pcl711_cleanup_module);
-
 struct pcl711_private {
 
 	int board;
@@ -513,21 +479,6 @@ static int pcl711_do_insn_bits(struct comedi_device *dev,
 	return 2;
 }
 
-/*  Free any resources that we have claimed  */
-static int pcl711_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: pcl711: remove\n", dev->minor);
-
-	if (dev->irq)
-		free_irq(dev->irq, dev);
-
-	if (dev->iobase)
-		release_region(dev->iobase, PCL711_SIZE);
-
-	return 0;
-}
-
-/*  Initialization */
 static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
@@ -640,6 +591,32 @@ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
+static void pcl711_detach(struct comedi_device *dev)
+{
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+	if (dev->iobase)
+		release_region(dev->iobase, PCL711_SIZE);
+}
+
+static const struct pcl711_board boardtypes[] = {
+	{ "pcl711", 0, 0, 0, 5, 8, 1, 0, &range_bipolar5 },
+	{ "pcl711b", 1, 0, 0, 5, 8, 1, 7, &range_pcl711b_ai },
+	{ "acl8112hg", 0, 1, 0, 12, 16, 2, 15, &range_acl8112hg_ai },
+	{ "acl8112dg", 0, 1, 1, 9, 16, 2, 15, &range_acl8112dg_ai },
+};
+
+static struct comedi_driver pcl711_driver = {
+	.driver_name	= "pcl711",
+	.module		= THIS_MODULE,
+	.attach		= pcl711_attach,
+	.detach		= pcl711_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl711_board),
+};
+module_comedi_driver(pcl711_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl724.c b/drivers/staging/comedi/drivers/pcl724.c
index 61b075db66ef..1f66fe1c7d5e 100644
--- a/drivers/staging/comedi/drivers/pcl724.c
+++ b/drivers/staging/comedi/drivers/pcl724.c
@@ -56,10 +56,6 @@ See the source for configuration details.
 
 /* #define PCL724_IRQ   1  no IRQ support now */
 
-static int pcl724_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl724_detach(struct comedi_device *dev);
-
 struct pcl724_board {
 
 	const char *name;	/*  board name */
@@ -71,41 +67,8 @@ struct pcl724_board {
 	char is_pet48;
 };
 
-static const struct pcl724_board boardtypes[] = {
-	{"pcl724", 24, 1, 0x00fc, PCL724_SIZE, 0, 0,},
-	{"pcl722", 144, 6, 0x00fc, PCL722_SIZE, 1, 0,},
-	{"pcl731", 48, 2, 0x9cfc, PCL731_SIZE, 0, 0,},
-	{"acl7122", 144, 6, 0x9ee8, PCL722_SIZE, 1, 0,},
-	{"acl7124", 24, 1, 0x00fc, PCL724_SIZE, 0, 0,},
-	{"pet48dio", 48, 2, 0x9eb8, PET48_SIZE, 0, 1,},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl724_board))
 #define this_board ((const struct pcl724_board *)dev->board_ptr)
 
-static struct comedi_driver driver_pcl724 = {
-	.driver_name = "pcl724",
-	.module = THIS_MODULE,
-	.attach = pcl724_attach,
-	.detach = pcl724_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl724_board),
-};
-
-static int __init driver_pcl724_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl724);
-}
-
-static void __exit driver_pcl724_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl724);
-}
-
-module_init(driver_pcl724_init_module);
-module_exit(driver_pcl724_cleanup_module);
-
 static int subdev_8255_cb(int dir, int port, int data, unsigned long arg)
 {
 	unsigned long iobase = arg;
@@ -214,25 +177,39 @@ static int pcl724_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int pcl724_detach(struct comedi_device *dev)
+static void pcl724_detach(struct comedi_device *dev)
 {
 	int i;
 
-	/* printk("comedi%d: pcl724: remove\n",dev->minor); */
-
 	for (i = 0; i < dev->n_subdevices; i++)
 		subdev_8255_cleanup(dev, dev->subdevices + i);
-
 #ifdef PCL724_IRQ
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 #endif
-
 	release_region(dev->iobase, this_board->io_range);
-
-	return 0;
 }
 
+static const struct pcl724_board boardtypes[] = {
+	{ "pcl724", 24, 1, 0x00fc, PCL724_SIZE, 0, 0, },
+	{ "pcl722", 144, 6, 0x00fc, PCL722_SIZE, 1, 0, },
+	{ "pcl731", 48, 2, 0x9cfc, PCL731_SIZE, 0, 0, },
+	{ "acl7122", 144, 6, 0x9ee8, PCL722_SIZE, 1, 0, },
+	{ "acl7124", 24, 1, 0x00fc, PCL724_SIZE, 0, 0, },
+	{ "pet48dio", 48, 2, 0x9eb8, PET48_SIZE, 0, 1, },
+};
+
+static struct comedi_driver pcl724_driver = {
+	.driver_name	= "pcl724",
+	.module		= THIS_MODULE,
+	.attach		= pcl724_attach,
+	.detach		= pcl724_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl724_board),
+};
+module_comedi_driver(pcl724_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl725.c b/drivers/staging/comedi/drivers/pcl725.c
index 24b223ca4399..83a6fa53dddd 100644
--- a/drivers/staging/comedi/drivers/pcl725.c
+++ b/drivers/staging/comedi/drivers/pcl725.c
@@ -20,29 +20,6 @@ Devices: [Advantech] PCL-725 (pcl725)
 #define PCL725_DO 0
 #define PCL725_DI 1
 
-static int pcl725_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl725_detach(struct comedi_device *dev);
-static struct comedi_driver driver_pcl725 = {
-	.driver_name = "pcl725",
-	.module = THIS_MODULE,
-	.attach = pcl725_attach,
-	.detach = pcl725_detach,
-};
-
-static int __init driver_pcl725_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl725);
-}
-
-static void __exit driver_pcl725_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl725);
-}
-
-module_init(driver_pcl725_init_module);
-module_exit(driver_pcl725_cleanup_module);
-
 static int pcl725_do_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data)
 {
@@ -112,16 +89,20 @@ static int pcl725_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int pcl725_detach(struct comedi_device *dev)
+static void pcl725_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: pcl725: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, PCL725_SIZE);
-
-	return 0;
 }
 
+static struct comedi_driver pcl725_driver = {
+	.driver_name	= "pcl725",
+	.module		= THIS_MODULE,
+	.attach		= pcl725_attach,
+	.detach		= pcl725_detach,
+};
+module_comedi_driver(pcl725_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl726.c b/drivers/staging/comedi/drivers/pcl726.c
index 897cd808eeb7..d25c30c694e3 100644
--- a/drivers/staging/comedi/drivers/pcl726.c
+++ b/drivers/staging/comedi/drivers/pcl726.c
@@ -111,10 +111,6 @@ static const struct comedi_lrange *const rangelist_728[] = {
 	&range_4_20mA, &range_0_20mA
 };
 
-static int pcl726_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl726_detach(struct comedi_device *dev);
-
 struct pcl726_board {
 
 	const char *name;	/*  driver name */
@@ -149,32 +145,8 @@ static const struct pcl726_board boardtypes[] = {
 	 &rangelist_728[0],},
 };
 
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl726_board))
 #define this_board ((const struct pcl726_board *)dev->board_ptr)
 
-static struct comedi_driver driver_pcl726 = {
-	.driver_name = "pcl726",
-	.module = THIS_MODULE,
-	.attach = pcl726_attach,
-	.detach = pcl726_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl726_board),
-};
-
-static int __init driver_pcl726_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl726);
-}
-
-static void __exit driver_pcl726_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl726);
-}
-
-module_init(driver_pcl726_init_module);
-module_exit(driver_pcl726_cleanup_module);
-
 struct pcl726_private {
 
 	int bipolar[12];
@@ -378,21 +350,27 @@ static int pcl726_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int pcl726_detach(struct comedi_device *dev)
+static void pcl726_detach(struct comedi_device *dev)
 {
-/* printk("comedi%d: pcl726: remove\n",dev->minor); */
-
 #ifdef ACL6126_IRQ
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 #endif
-
 	if (dev->iobase)
 		release_region(dev->iobase, this_board->io_range);
-
-	return 0;
 }
 
+static struct comedi_driver pcl726_driver = {
+	.driver_name	= "pcl726",
+	.module		= THIS_MODULE,
+	.attach		= pcl726_attach,
+	.detach		= pcl726_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl726_board),
+};
+module_comedi_driver(pcl726_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c
index c9682d614e0e..e11704addedb 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -26,48 +26,14 @@ The ACL-7130 card have an 8254 timer/counter not supported by this driver.
 #define PCL730_DIO_LO	2	/* TTL Digital I/O low byte (D0-D7) */
 #define PCL730_DIO_HI	3	/* TTL Digital I/O high byte (D8-D15) */
 
-static int pcl730_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl730_detach(struct comedi_device *dev);
-
 struct pcl730_board {
 
 	const char *name;	/*  board name */
 	unsigned int io_range;	/*  len of I/O space */
 };
 
-static const struct pcl730_board boardtypes[] = {
-	{"pcl730", PCL730_SIZE,},
-	{"iso730", PCL730_SIZE,},
-	{"acl7130", ACL7130_SIZE,},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl730_board))
 #define this_board ((const struct pcl730_board *)dev->board_ptr)
 
-static struct comedi_driver driver_pcl730 = {
-	.driver_name = "pcl730",
-	.module = THIS_MODULE,
-	.attach = pcl730_attach,
-	.detach = pcl730_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl730_board),
-};
-
-static int __init driver_pcl730_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl730);
-}
-
-static void __exit driver_pcl730_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl730);
-}
-
-module_init(driver_pcl730_init_module);
-module_exit(driver_pcl730_cleanup_module);
-
 static int pcl730_do_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data)
 {
@@ -168,16 +134,29 @@ static int pcl730_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int pcl730_detach(struct comedi_device *dev)
+static void pcl730_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: pcl730: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, this_board->io_range);
-
-	return 0;
 }
 
+static const struct pcl730_board boardtypes[] = {
+	{ "pcl730", PCL730_SIZE, },
+	{ "iso730", PCL730_SIZE, },
+	{ "acl7130", ACL7130_SIZE, },
+};
+
+static struct comedi_driver pcl730_driver = {
+	.driver_name	= "pcl730",
+	.module		= THIS_MODULE,
+	.attach		= pcl730_attach,
+	.detach		= pcl730_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl730_board),
+};
+module_comedi_driver(pcl730_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index 6fc74645af2c..51f4ca9f7927 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -316,10 +316,6 @@ static const struct comedi_lrange range_a821pgh_ai = { 4, {
 							   }
 };
 
-static int pcl812_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl812_detach(struct comedi_device *dev);
-
 struct pcl812_board {
 
 	const char *name;	/*  board name */
@@ -340,89 +336,8 @@ struct pcl812_board {
 	unsigned char haveMPC508;	/*  1=board use MPC508A multiplexor */
 };
 
-static const struct pcl812_board boardtypes[] = {
-	{"pcl812", boardPCL812, 16, 0, 2, 16, 16, 0x0fff,
-	 33000, 500, &range_bipolar10, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"pcl812pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff,
-	 33000, 500, &range_pcl812pg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"acl8112pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_pcl812pg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"acl8112dg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112dg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
-	{"acl8112hg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112hg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
-	{"a821pgl", boardA821, 16, 8, 1, 16, 16, 0x0fff,
-	 10000, 500, &range_pcl813b_ai, &range_unipolar5,
-	 0x000c, 0x00, PCLx1x_IORANGE, 0},
-	{"a821pglnda", boardA821, 16, 8, 0, 0, 0, 0x0fff,
-	 10000, 500, &range_pcl813b_ai, NULL,
-	 0x000c, 0x00, PCLx1x_IORANGE, 0},
-	{"a821pgh", boardA821, 16, 8, 1, 16, 16, 0x0fff,
-	 10000, 500, &range_a821pgh_ai, &range_unipolar5,
-	 0x000c, 0x00, PCLx1x_IORANGE, 0},
-	{"a822pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112dg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"a822pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 10000, 500, &range_acl8112hg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"a823pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 8000, 500, &range_acl8112dg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"a823pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
-	 8000, 500, &range_acl8112hg_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-	{"pcl813", boardPCL813, 32, 0, 0, 0, 0, 0x0fff,
-	 0, 0, &range_pcl813b_ai, NULL,
-	 0x0000, 0x00, PCLx1x_IORANGE, 0},
-	{"pcl813b", boardPCL813B, 32, 0, 0, 0, 0, 0x0fff,
-	 0, 0, &range_pcl813b_ai, NULL,
-	 0x0000, 0x00, PCLx1x_IORANGE, 0},
-	{"acl8113", boardACL8113, 32, 0, 0, 0, 0, 0x0fff,
-	 0, 0, &range_acl8113_1_ai, NULL,
-	 0x0000, 0x00, PCLx1x_IORANGE, 0},
-	{"iso813", boardISO813, 32, 0, 0, 0, 0, 0x0fff,
-	 0, 0, &range_iso813_1_ai, NULL,
-	 0x0000, 0x00, PCLx1x_IORANGE, 0},
-	{"acl8216", boardACL8216, 16, 8, 2, 16, 16, 0xffff,
-	 10000, 500, &range_pcl813b2_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
-	{"a826pg", boardACL8216, 16, 8, 2, 16, 16, 0xffff,
-	 10000, 500, &range_pcl813b2_ai, &range_unipolar5,
-	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl812_board))
 #define this_board ((const struct pcl812_board *)dev->board_ptr)
 
-static struct comedi_driver driver_pcl812 = {
-	.driver_name = "pcl812",
-	.module = THIS_MODULE,
-	.attach = pcl812_attach,
-	.detach = pcl812_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl812_board),
-};
-
-static int __init driver_pcl812_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl812);
-}
-
-static void __exit driver_pcl812_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl812);
-}
-
-module_init(driver_pcl812_init_module);
-module_exit(driver_pcl812_cleanup_module);
-
 struct pcl812_private {
 
 	unsigned char valid;	/*  =1 device is OK */
@@ -1356,9 +1271,6 @@ static void pcl812_reset(struct comedi_device *dev)
 #endif
 }
 
-/*
-==============================================================================
-*/
 static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret, subdev;
@@ -1702,19 +1614,79 @@ no_dma:
 	return 0;
 }
 
-/*
-==============================================================================
- */
-static int pcl812_detach(struct comedi_device *dev)
+static void pcl812_detach(struct comedi_device *dev)
 {
-
-#ifdef PCL812_EXTDEBUG
-	printk(KERN_DEBUG "comedi%d: pcl812: remove\n", dev->minor);
-#endif
 	free_resources(dev);
-	return 0;
 }
 
+static const struct pcl812_board boardtypes[] = {
+	{"pcl812", boardPCL812, 16, 0, 2, 16, 16, 0x0fff,
+	 33000, 500, &range_bipolar10, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"pcl812pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff,
+	 33000, 500, &range_pcl812pg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"acl8112pg", boardPCL812PG, 16, 0, 2, 16, 16, 0x0fff,
+	 10000, 500, &range_pcl812pg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"acl8112dg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 10000, 500, &range_acl8112dg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
+	{"acl8112hg", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 10000, 500, &range_acl8112hg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
+	{"a821pgl", boardA821, 16, 8, 1, 16, 16, 0x0fff,
+	 10000, 500, &range_pcl813b_ai, &range_unipolar5,
+	 0x000c, 0x00, PCLx1x_IORANGE, 0},
+	{"a821pglnda", boardA821, 16, 8, 0, 0, 0, 0x0fff,
+	 10000, 500, &range_pcl813b_ai, NULL,
+	 0x000c, 0x00, PCLx1x_IORANGE, 0},
+	{"a821pgh", boardA821, 16, 8, 1, 16, 16, 0x0fff,
+	 10000, 500, &range_a821pgh_ai, &range_unipolar5,
+	 0x000c, 0x00, PCLx1x_IORANGE, 0},
+	{"a822pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 10000, 500, &range_acl8112dg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"a822pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 10000, 500, &range_acl8112hg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"a823pgl", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 8000, 500, &range_acl8112dg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"a823pgh", boardACL8112, 16, 8, 2, 16, 16, 0x0fff,
+	 8000, 500, &range_acl8112hg_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+	{"pcl813", boardPCL813, 32, 0, 0, 0, 0, 0x0fff,
+	 0, 0, &range_pcl813b_ai, NULL,
+	 0x0000, 0x00, PCLx1x_IORANGE, 0},
+	{"pcl813b", boardPCL813B, 32, 0, 0, 0, 0, 0x0fff,
+	 0, 0, &range_pcl813b_ai, NULL,
+	 0x0000, 0x00, PCLx1x_IORANGE, 0},
+	{"acl8113", boardACL8113, 32, 0, 0, 0, 0, 0x0fff,
+	 0, 0, &range_acl8113_1_ai, NULL,
+	 0x0000, 0x00, PCLx1x_IORANGE, 0},
+	{"iso813", boardISO813, 32, 0, 0, 0, 0, 0x0fff,
+	 0, 0, &range_iso813_1_ai, NULL,
+	 0x0000, 0x00, PCLx1x_IORANGE, 0},
+	{"acl8216", boardACL8216, 16, 8, 2, 16, 16, 0xffff,
+	 10000, 500, &range_pcl813b2_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 1},
+	{"a826pg", boardACL8216, 16, 8, 2, 16, 16, 0xffff,
+	 10000, 500, &range_pcl813b2_ai, &range_unipolar5,
+	 0xdcfc, 0x0a, PCLx1x_IORANGE, 0},
+};
+
+static struct comedi_driver pcl812_driver = {
+	.driver_name	= "pcl812",
+	.module		= THIS_MODULE,
+	.attach		= pcl812_attach,
+	.detach		= pcl812_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl812_board),
+};
+module_comedi_driver(pcl812_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 96cd7ec2ad53..cc67b6d46059 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -125,63 +125,14 @@ struct pcl816_board {
 	int i8254_osc_base;	/*  1/frequency of on board oscilator in ns */
 };
 
-static const struct pcl816_board boardtypes[] = {
-	{"pcl816", 8, 16, 10000, 1, 16, 16, &range_pcl816,
-	 &range_pcl816, PCLx1x_RANGE,
-	 0x00fc,		/*  IRQ mask */
-	 0x0a,			/*  DMA mask */
-	 0xffff,		/*  16-bit card */
-	 0xffff,		/*  D/A maxdata */
-	 1024,
-	 1,			/*  ao chan list */
-	 100},
-	{"pcl814b", 8, 16, 10000, 1, 16, 16, &range_pcl816,
-	 &range_pcl816, PCLx1x_RANGE,
-	 0x00fc,
-	 0x0a,
-	 0x3fff,		/* 14 bit card */
-	 0x3fff,
-	 1024,
-	 1,
-	 100},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl816_board))
 #define devpriv ((struct pcl816_private *)dev->private)
 #define this_board ((const struct pcl816_board *)dev->board_ptr)
 
-static int pcl816_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl816_detach(struct comedi_device *dev);
-
 #ifdef unused
 static int RTC_lock;	/* RTC lock */
 static int RTC_timer_lock;	/* RTC int lock */
 #endif
 
-static struct comedi_driver driver_pcl816 = {
-	.driver_name = "pcl816",
-	.module = THIS_MODULE,
-	.attach = pcl816_attach,
-	.detach = pcl816_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl816_board),
-};
-
-static int __init driver_pcl816_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl816);
-}
-
-static void __exit driver_pcl816_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl816);
-}
-
-module_init(driver_pcl816_init_module);
-module_exit(driver_pcl816_cleanup_module);
-
 struct pcl816_private {
 
 	unsigned int dma;	/*  used DMA, 0=don't use DMA */
@@ -1075,46 +1026,6 @@ static int set_rtc_irq_bit(unsigned char bit)
 }
 #endif
 
-/*
-==============================================================================
-  Free any resources that we have claimed
-*/
-static void free_resources(struct comedi_device *dev)
-{
-	/* printk("free_resource()\n"); */
-	if (dev->private) {
-		pcl816_ai_cancel(dev, devpriv->sub_ai);
-		pcl816_reset(dev);
-		if (devpriv->dma)
-			free_dma(devpriv->dma);
-		if (devpriv->dmabuf[0])
-			free_pages(devpriv->dmabuf[0], devpriv->dmapages[0]);
-		if (devpriv->dmabuf[1])
-			free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
-#ifdef unused
-		if (devpriv->rtc_irq)
-			free_irq(devpriv->rtc_irq, dev);
-		if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
-			if (devpriv->rtc_iobase)
-				release_region(devpriv->rtc_iobase,
-					       devpriv->rtc_iosize);
-		}
-#endif
-	}
-
-	if (dev->irq)
-		free_irq(dev->irq, dev);
-	if (dev->iobase)
-		release_region(dev->iobase, this_board->io_range);
-	/* printk("free_resource() end\n"); */
-}
-
-/*
-==============================================================================
-
-   Initialization
-
-*/
 static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
@@ -1340,21 +1251,69 @@ case COMEDI_SUBD_DO:
 	return 0;
 }
 
-/*
-==============================================================================
-  Removes device
- */
-static int pcl816_detach(struct comedi_device *dev)
+static void pcl816_detach(struct comedi_device *dev)
 {
-	DEBUG(printk(KERN_INFO "comedi%d: pcl816: remove\n", dev->minor);)
-	    free_resources(dev);
+	if (dev->private) {
+		pcl816_ai_cancel(dev, devpriv->sub_ai);
+		pcl816_reset(dev);
+		if (devpriv->dma)
+			free_dma(devpriv->dma);
+		if (devpriv->dmabuf[0])
+			free_pages(devpriv->dmabuf[0], devpriv->dmapages[0]);
+		if (devpriv->dmabuf[1])
+			free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
+#ifdef unused
+		if (devpriv->rtc_irq)
+			free_irq(devpriv->rtc_irq, dev);
+		if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
+			if (devpriv->rtc_iobase)
+				release_region(devpriv->rtc_iobase,
+					       devpriv->rtc_iosize);
+		}
+#endif
+	}
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+	if (dev->iobase)
+		release_region(dev->iobase, this_board->io_range);
 #ifdef unused
 	if (devpriv->dma_rtc)
 		RTC_lock--;
 #endif
-	return 0;
 }
 
+static const struct pcl816_board boardtypes[] = {
+	{"pcl816", 8, 16, 10000, 1, 16, 16, &range_pcl816,
+	 &range_pcl816, PCLx1x_RANGE,
+	 0x00fc,		/*  IRQ mask */
+	 0x0a,			/*  DMA mask */
+	 0xffff,		/*  16-bit card */
+	 0xffff,		/*  D/A maxdata */
+	 1024,
+	 1,			/*  ao chan list */
+	 100},
+	{"pcl814b", 8, 16, 10000, 1, 16, 16, &range_pcl816,
+	 &range_pcl816, PCLx1x_RANGE,
+	 0x00fc,
+	 0x0a,
+	 0x3fff,		/* 14 bit card */
+	 0x3fff,
+	 1024,
+	 1,
+	 100},
+};
+
+static struct comedi_driver pcl816_driver = {
+	.driver_name	= "pcl816",
+	.module		= THIS_MODULE,
+	.attach		= pcl816_attach,
+	.detach		= pcl816_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl816_board),
+};
+module_comedi_driver(pcl816_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 7344a53a81c4..1406c9720f5d 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -247,10 +247,6 @@ static const struct comedi_lrange range718_bipolar0_5 =
 static const struct comedi_lrange range718_unipolar2 = { 1, {UNI_RANGE(2),} };
 static const struct comedi_lrange range718_unipolar1 = { 1, {BIP_RANGE(1),} };
 
-static int pcl818_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcl818_detach(struct comedi_device *dev);
-
 #ifdef unused
 static int RTC_lock;	/* RTC lock */
 static int RTC_timer_lock;	/* RTC int lock */
@@ -277,56 +273,6 @@ struct pcl818_board {
 	int is_818;
 };
 
-static const struct pcl818_board boardtypes[] = {
-	{"pcl818l", 4, 16, 8, 25000, 1, 16, 16, &range_pcl818l_l_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 0, 1},
-	{"pcl818h", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 0, 1},
-	{"pcl818hd", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 1, 1},
-	{"pcl818hg", 12, 16, 8, 10000, 1, 16, 16, &range_pcl818hg_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 1, 1},
-	{"pcl818", 9, 16, 8, 10000, 2, 16, 16, &range_pcl818h_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 0, 1},
-	{"pcl718", 1, 16, 8, 16000, 2, 16, 16, &range_unipolar5,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 0, 0},
-	/* pcm3718 */
-	{"pcm3718", 9, 16, 8, 10000, 0, 16, 16, &range_pcl818h_ai,
-	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
-	 0x0a, 0xfff, 0xfff, 0, 1 /* XXX ? */ },
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcl818_board))
-
-static struct comedi_driver driver_pcl818 = {
-	.driver_name = "pcl818",
-	.module = THIS_MODULE,
-	.attach = pcl818_attach,
-	.detach = pcl818_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcl818_board),
-};
-
-static int __init driver_pcl818_init_module(void)
-{
-	return comedi_driver_register(&driver_pcl818);
-}
-
-static void __exit driver_pcl818_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcl818);
-}
-
-module_init(driver_pcl818_init_module);
-module_exit(driver_pcl818_cleanup_module);
-
 struct pcl818_private {
 
 	unsigned int dma;	/*  used DMA, 0=don't use DMA */
@@ -1688,48 +1634,6 @@ static int rtc_setfreq_irq(int freq)
 }
 #endif
 
-/*
-==============================================================================
-  Free any resources that we have claimed
-*/
-static void free_resources(struct comedi_device *dev)
-{
-	/* printk("free_resource()\n"); */
-	if (dev->private) {
-		pcl818_ai_cancel(dev, devpriv->sub_ai);
-		pcl818_reset(dev);
-		if (devpriv->dma)
-			free_dma(devpriv->dma);
-		if (devpriv->dmabuf[0])
-			free_pages(devpriv->dmabuf[0], devpriv->dmapages[0]);
-		if (devpriv->dmabuf[1])
-			free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
-#ifdef unused
-		if (devpriv->rtc_irq)
-			free_irq(devpriv->rtc_irq, dev);
-		if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
-			if (devpriv->rtc_iobase)
-				release_region(devpriv->rtc_iobase,
-					       devpriv->rtc_iosize);
-		}
-		if (devpriv->dma_rtc)
-			RTC_lock--;
-#endif
-	}
-
-	if (dev->irq)
-		free_irq(dev->irq, dev);
-	if (dev->iobase)
-		release_region(dev->iobase, devpriv->io_range);
-	/* printk("free_resource() end\n"); */
-}
-
-/*
-==============================================================================
-
-   Initialization
-
-*/
 static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	int ret;
@@ -2020,17 +1924,71 @@ no_dma:
 	return 0;
 }
 
-/*
-==============================================================================
-  Removes device
- */
-static int pcl818_detach(struct comedi_device *dev)
+static void pcl818_detach(struct comedi_device *dev)
 {
-	/*   printk("comedi%d: pcl818: remove\n", dev->minor); */
-	free_resources(dev);
-	return 0;
+	if (dev->private) {
+		pcl818_ai_cancel(dev, devpriv->sub_ai);
+		pcl818_reset(dev);
+		if (devpriv->dma)
+			free_dma(devpriv->dma);
+		if (devpriv->dmabuf[0])
+			free_pages(devpriv->dmabuf[0], devpriv->dmapages[0]);
+		if (devpriv->dmabuf[1])
+			free_pages(devpriv->dmabuf[1], devpriv->dmapages[1]);
+#ifdef unused
+		if (devpriv->rtc_irq)
+			free_irq(devpriv->rtc_irq, dev);
+		if ((devpriv->dma_rtc) && (RTC_lock == 1)) {
+			if (devpriv->rtc_iobase)
+				release_region(devpriv->rtc_iobase,
+					       devpriv->rtc_iosize);
+		}
+		if (devpriv->dma_rtc)
+			RTC_lock--;
+#endif
+	}
+	if (dev->irq)
+		free_irq(dev->irq, dev);
+	if (dev->iobase)
+		release_region(dev->iobase, devpriv->io_range);
 }
 
+static const struct pcl818_board boardtypes[] = {
+	{"pcl818l", 4, 16, 8, 25000, 1, 16, 16, &range_pcl818l_l_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 0, 1},
+	{"pcl818h", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 0, 1},
+	{"pcl818hd", 9, 16, 8, 10000, 1, 16, 16, &range_pcl818h_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 1, 1},
+	{"pcl818hg", 12, 16, 8, 10000, 1, 16, 16, &range_pcl818hg_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 1, 1},
+	{"pcl818", 9, 16, 8, 10000, 2, 16, 16, &range_pcl818h_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 0, 1},
+	{"pcl718", 1, 16, 8, 16000, 2, 16, 16, &range_unipolar5,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 0, 0},
+	/* pcm3718 */
+	{"pcm3718", 9, 16, 8, 10000, 0, 16, 16, &range_pcl818h_ai,
+	 &range_unipolar5, PCLx1x_RANGE, 0x00fc,
+	 0x0a, 0xfff, 0xfff, 0, 1 /* XXX ? */ },
+};
+
+static struct comedi_driver pcl818_driver = {
+	.driver_name	= "pcl818",
+	.module		= THIS_MODULE,
+	.attach		= pcl818_attach,
+	.detach		= pcl818_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcl818_board),
+};
+module_comedi_driver(pcl818_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcm3724.c b/drivers/staging/comedi/drivers/pcm3724.c
index f5c0bd17684c..7492b8f1d499 100644
--- a/drivers/staging/comedi/drivers/pcm3724.c
+++ b/drivers/staging/comedi/drivers/pcm3724.c
@@ -62,10 +62,6 @@ Copy/pasted/hacked from pcm724.c
 #define CR_A_MODE(a)	((a)<<5)
 #define CR_CW		0x80
 
-static int pcm3724_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pcm3724_detach(struct comedi_device *dev);
-
 struct pcm3724_board {
 	const char *name;	/*  driver name */
 	int dio;		/*  num of DIO */
@@ -80,36 +76,8 @@ struct priv_pcm3724 {
 	int dio_2;
 };
 
-static const struct pcm3724_board boardtypes[] = {
-	{"pcm3724", 48, 2, 0x00fc, PCM3724_SIZE,},
-};
-
-#define n_boardtypes (sizeof(boardtypes)/sizeof(struct pcm3724_board))
 #define this_board ((const struct pcm3724_board *)dev->board_ptr)
 
-static struct comedi_driver driver_pcm3724 = {
-	.driver_name = "pcm3724",
-	.module = THIS_MODULE,
-	.attach = pcm3724_attach,
-	.detach = pcm3724_detach,
-	.board_name = &boardtypes[0].name,
-	.num_names = n_boardtypes,
-	.offset = sizeof(struct pcm3724_board),
-};
-
-static int __init driver_pcm3724_init_module(void)
-{
-	return comedi_driver_register(&driver_pcm3724);
-}
-
-static void __exit driver_pcm3724_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcm3724);
-}
-
-module_init(driver_pcm3724_init_module);
-module_exit(driver_pcm3724_cleanup_module);
-
 /* (setq c-basic-offset 8) */
 
 static int subdev_8255_cb(int dir, int port, int data, unsigned long arg)
@@ -305,7 +273,7 @@ static int pcm3724_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int pcm3724_detach(struct comedi_device *dev)
+static void pcm3724_detach(struct comedi_device *dev)
 {
 	int i;
 
@@ -315,10 +283,23 @@ static int pcm3724_detach(struct comedi_device *dev)
 	}
 	if (dev->iobase)
 		release_region(dev->iobase, this_board->io_range);
-
-	return 0;
 }
 
+static const struct pcm3724_board boardtypes[] = {
+	{ "pcm3724", 48, 2, 0x00fc, PCM3724_SIZE, },
+};
+
+static struct comedi_driver pcm3724_driver = {
+	.driver_name	= "pcm3724",
+	.module		= THIS_MODULE,
+	.attach		= pcm3724_attach,
+	.detach		= pcm3724_detach,
+	.board_name	= &boardtypes[0].name,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.offset		= sizeof(struct pcm3724_board),
+};
+module_comedi_driver(pcm3724_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcm3730.c b/drivers/staging/comedi/drivers/pcm3730.c
index bada6b236ff1..f8d1c644daf8 100644
--- a/drivers/staging/comedi/drivers/pcm3730.c
+++ b/drivers/staging/comedi/drivers/pcm3730.c
@@ -28,29 +28,6 @@ Configuration options:
 #define PCM3730_DIB 2
 #define PCM3730_DIC 3
 
-static int pcm3730_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pcm3730_detach(struct comedi_device *dev);
-static struct comedi_driver driver_pcm3730 = {
-	.driver_name = "pcm3730",
-	.module = THIS_MODULE,
-	.attach = pcm3730_attach,
-	.detach = pcm3730_detach,
-};
-
-static int __init driver_pcm3730_init_module(void)
-{
-	return comedi_driver_register(&driver_pcm3730);
-}
-
-static void __exit driver_pcm3730_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcm3730);
-}
-
-module_init(driver_pcm3730_init_module);
-module_exit(driver_pcm3730_cleanup_module);
-
 static int pcm3730_do_insn_bits(struct comedi_device *dev,
 				struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int *data)
@@ -156,16 +133,20 @@ static int pcm3730_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int pcm3730_detach(struct comedi_device *dev)
+static void pcm3730_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: pcm3730: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, PCM3730_SIZE);
-
-	return 0;
 }
 
+static struct comedi_driver pcm3730_driver = {
+	.driver_name	= "pcm3730",
+	.module		= THIS_MODULE,
+	.attach		= pcm3730_attach,
+	.detach		= pcm3730_detach,
+};
+module_comedi_driver(pcm3730_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcmad.c b/drivers/staging/comedi/drivers/pcmad.c
index 23b3d777340c..1ec7d5cb346a 100644
--- a/drivers/staging/comedi/drivers/pcmad.c
+++ b/drivers/staging/comedi/drivers/pcmad.c
@@ -57,19 +57,8 @@ struct pcmad_board_struct {
 	const char *name;
 	int n_ai_bits;
 };
-static const struct pcmad_board_struct pcmad_boards[] = {
-	{
-	 .name = "pcmad12",
-	 .n_ai_bits = 12,
-	 },
-	{
-	 .name = "pcmad16",
-	 .n_ai_bits = 16,
-	 },
-};
 
 #define this_board ((const struct pcmad_board_struct *)(dev->board_ptr))
-#define n_pcmad_boards ARRAY_SIZE(pcmad_boards)
 
 struct pcmad_priv_struct {
 	int differential;
@@ -77,31 +66,6 @@ struct pcmad_priv_struct {
 };
 #define devpriv ((struct pcmad_priv_struct *)dev->private)
 
-static int pcmad_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int pcmad_detach(struct comedi_device *dev);
-static struct comedi_driver driver_pcmad = {
-	.driver_name = "pcmad",
-	.module = THIS_MODULE,
-	.attach = pcmad_attach,
-	.detach = pcmad_detach,
-	.board_name = &pcmad_boards[0].name,
-	.num_names = n_pcmad_boards,
-	.offset = sizeof(pcmad_boards[0]),
-};
-
-static int __init driver_pcmad_init_module(void)
-{
-	return comedi_driver_register(&driver_pcmad);
-}
-
-static void __exit driver_pcmad_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_pcmad);
-}
-
-module_init(driver_pcmad_init_module);
-module_exit(driver_pcmad_cleanup_module);
-
 #define TIMEOUT	100
 
 static int pcmad_ai_insn_read(struct comedi_device *dev,
@@ -175,19 +139,34 @@ static int pcmad_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int pcmad_detach(struct comedi_device *dev)
+static void pcmad_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: pcmad: remove\n", dev->minor);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
 	if (dev->iobase)
 		release_region(dev->iobase, PCMAD_SIZE);
-
-	return 0;
 }
 
+static const struct pcmad_board_struct pcmad_boards[] = {
+	{
+		.name		= "pcmad12",
+		.n_ai_bits	= 12,
+	}, {
+		.name		= "pcmad16",
+		.n_ai_bits	= 16,
+	},
+};
+static struct comedi_driver pcmad_driver = {
+	.driver_name	= "pcmad",
+	.module		= THIS_MODULE,
+	.attach		= pcmad_attach,
+	.detach		= pcmad_detach,
+	.board_name	= &pcmad_boards[0].name,
+	.num_names	= ARRAY_SIZE(pcmad_boards),
+	.offset		= sizeof(pcmad_boards[0]),
+};
+module_comedi_driver(pcmad_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c
index 0e9ffa28d745..4786148b4fd0 100644
--- a/drivers/staging/comedi/drivers/pcmda12.c
+++ b/drivers/staging/comedi/drivers/pcmda12.c
@@ -80,12 +80,6 @@ static const struct comedi_lrange pcmda12_ranges = {
 	 }
 };
 
-static const struct pcmda12_board pcmda12_boards[] = {
-	{
-	 .name = "pcmda12",
-	 },
-};
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -99,137 +93,6 @@ struct pcmda12_private {
 
 #define devpriv ((struct pcmda12_private *)(dev->private))
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pcmda12_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int pcmda12_detach(struct comedi_device *dev);
-
-static void zero_chans(struct comedi_device *dev);
-
-static struct comedi_driver driver = {
-	.driver_name = "pcmda12",
-	.module = THIS_MODULE,
-	.attach = pcmda12_attach,
-	.detach = pcmda12_detach,
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
-	/* Most drivers will support multiple types of boards by
-	 * having an array of board structures.  These were defined
-	 * in pcmda12_boards[] above.  Note that the element 'name'
-	 * was first in the structure -- Comedi uses this fact to
-	 * extract the name of the board without knowing any details
-	 * about the structure except for its length.
-	 * When a device is attached (by comedi_config), the name
-	 * of the device is given to Comedi, and Comedi tries to
-	 * match it by going through the list of board names.  If
-	 * there is a match, the address of the pointer is put
-	 * into dev->board_ptr and driver->attach() is called.
-	 *
-	 * Note that these are not necessary if you can determine
-	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
-	 * devices are such boards.
-	 */
-	.board_name = &pcmda12_boards[0].name,
-	.offset = sizeof(struct pcmda12_board),
-	.num_names = ARRAY_SIZE(pcmda12_boards),
-};
-
-static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
-		    struct comedi_insn *insn, unsigned int *data);
-static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-		    struct comedi_insn *insn, unsigned int *data);
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int pcmda12_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	unsigned long iobase;
-
-	iobase = it->options[0];
-	printk(KERN_INFO
-	       "comedi%d: %s: io: %lx %s ", dev->minor, driver.driver_name,
-	       iobase, it->options[1] ? "simultaneous xfer mode enabled" : "");
-
-	if (!request_region(iobase, IOSIZE, driver.driver_name)) {
-		printk("I/O port conflict\n");
-		return -EIO;
-	}
-	dev->iobase = iobase;
-
-/*
- * Initialize dev->board_name.  Note that we can use the "thisboard"
- * macro now, since we just initialized it in the last line.
- */
-	dev->board_name = thisboard->name;
-
-/*
- * Allocate the private structure area.  alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
-	if (alloc_private(dev, sizeof(struct pcmda12_private)) < 0) {
-		printk(KERN_ERR "cannot allocate private data structure\n");
-		return -ENOMEM;
-	}
-
-	devpriv->simultaneous_xfer_mode = it->options[1];
-
-	/*
-	 * Allocate the subdevice structures.  alloc_subdevice() is a
-	 * convenient macro defined in comedidev.h.
-	 *
-	 * Allocate 2 subdevs (32 + 16 DIO lines) or 3 32 DIO subdevs for the
-	 * 96-channel version of the board.
-	 */
-	if (alloc_subdevices(dev, 1) < 0) {
-		printk(KERN_ERR "cannot allocate subdevice data structures\n");
-		return -ENOMEM;
-	}
-
-	s = dev->subdevices;
-	s->private = NULL;
-	s->maxdata = (0x1 << BITS) - 1;
-	s->range_table = &pcmda12_ranges;
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-	s->n_chan = CHANS;
-	s->insn_write = &ao_winsn;
-	s->insn_read = &ao_rinsn;
-
-	zero_chans(dev);	/* clear out all the registers, basically */
-
-	printk(KERN_INFO "attached\n");
-
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pcmda12_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO
-	       "comedi%d: %s: remove\n", dev->minor, driver.driver_name);
-	if (dev->iobase)
-		release_region(dev->iobase, IOSIZE);
-	return 0;
-}
-
 static void zero_chans(struct comedi_device *dev)
 {				/* sets up an
 				   ASIC chip to defaults */
@@ -301,22 +164,91 @@ static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	return i;
 }
 
+static int pcmda12_attach(struct comedi_device *dev,
+			  struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	unsigned long iobase;
+
+	iobase = it->options[0];
+	printk(KERN_INFO
+	       "comedi%d: %s: io: %lx %s ", dev->minor, dev->driver->driver_name,
+	       iobase, it->options[1] ? "simultaneous xfer mode enabled" : "");
+
+	if (!request_region(iobase, IOSIZE, dev->driver->driver_name)) {
+		printk("I/O port conflict\n");
+		return -EIO;
+	}
+	dev->iobase = iobase;
+
 /*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
+ * Initialize dev->board_name.  Note that we can use the "thisboard"
+ * macro now, since we just initialized it in the last line.
  */
-static int __init driver_init_module(void)
-{
-	return comedi_driver_register(&driver);
+	dev->board_name = thisboard->name;
+
+/*
+ * Allocate the private structure area.  alloc_private() is a
+ * convenient macro defined in comedidev.h.
+ */
+	if (alloc_private(dev, sizeof(struct pcmda12_private)) < 0) {
+		printk(KERN_ERR "cannot allocate private data structure\n");
+		return -ENOMEM;
+	}
+
+	devpriv->simultaneous_xfer_mode = it->options[1];
+
+	/*
+	 * Allocate the subdevice structures.  alloc_subdevice() is a
+	 * convenient macro defined in comedidev.h.
+	 *
+	 * Allocate 2 subdevs (32 + 16 DIO lines) or 3 32 DIO subdevs for the
+	 * 96-channel version of the board.
+	 */
+	if (alloc_subdevices(dev, 1) < 0) {
+		printk(KERN_ERR "cannot allocate subdevice data structures\n");
+		return -ENOMEM;
+	}
+
+	s = dev->subdevices;
+	s->private = NULL;
+	s->maxdata = (0x1 << BITS) - 1;
+	s->range_table = &pcmda12_ranges;
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+	s->n_chan = CHANS;
+	s->insn_write = &ao_winsn;
+	s->insn_read = &ao_rinsn;
+
+	zero_chans(dev);	/* clear out all the registers, basically */
+
+	printk(KERN_INFO "attached\n");
+
+	return 1;
 }
 
-static void __exit driver_cleanup_module(void)
+static void pcmda12_detach(struct comedi_device *dev)
 {
-	comedi_driver_unregister(&driver);
+	if (dev->iobase)
+		release_region(dev->iobase, IOSIZE);
 }
 
-module_init(driver_init_module);
-module_exit(driver_cleanup_module);
+static const struct pcmda12_board pcmda12_boards[] = {
+	{
+		.name	= "pcmda12",
+	},
+};
+
+static struct comedi_driver pcmda12_driver = {
+	.driver_name	= "pcmda12",
+	.module		= THIS_MODULE,
+	.attach		= pcmda12_attach,
+	.detach		= pcmda12_detach,
+	.board_name	= &pcmda12_boards[0].name,
+	.offset		= sizeof(struct pcmda12_board),
+	.num_names	= ARRAY_SIZE(pcmda12_boards),
+};
+module_comedi_driver(pcmda12_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index eddac00e4e29..efed168d2bac 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -145,13 +145,6 @@ Configuration Options:
 #define PAGE_ENAB 2
 #define PAGE_INT_ID 3
 
-static int ai_rinsn(struct comedi_device *, struct comedi_subdevice *,
-		    struct comedi_insn *, unsigned int *);
-static int ao_rinsn(struct comedi_device *, struct comedi_subdevice *,
-		    struct comedi_insn *, unsigned int *);
-static int ao_winsn(struct comedi_device *, struct comedi_subdevice *,
-		    struct comedi_insn *, unsigned int *);
-
 /*
  * Board descriptions for two imaginary boards.  Describing the
  * boards in this way is optional, and completely driver-dependent.
@@ -190,23 +183,6 @@ static const struct comedi_lrange ranges_ao = {
 	  RANGE(-2.5, 2.5), RANGE(-2.5, 7.5)}
 };
 
-static const struct pcmmio_board pcmmio_boards[] = {
-	{
-	 .name = "pcmmio",
-	 .dio_num_asics = 1,
-	 .dio_num_ports = 6,
-	 .total_iosize = 32,
-	 .ai_bits = 16,
-	 .ao_bits = 16,
-	 .n_ai_chans = 16,
-	 .n_ao_chans = 8,
-	 .ai_range_table = &ranges_ai,
-	 .ao_range_table = &ranges_ao,
-	 .ai_rinsn = ai_rinsn,
-	 .ao_rinsn = ao_rinsn,
-	 .ao_winsn = ao_winsn},
-};
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -293,312 +269,6 @@ struct pcmmio_private {
  */
 #define devpriv ((struct pcmmio_private *)dev->private)
 #define subpriv ((struct pcmmio_subdev_private *)s->private)
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pcmmio_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcmmio_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver = {
-	.driver_name = "pcmmio",
-	.module = THIS_MODULE,
-	.attach = pcmmio_attach,
-	.detach = pcmmio_detach,
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
-	/* Most drivers will support multiple types of boards by
-	 * having an array of board structures.  These were defined
-	 * in pcmmio_boards[] above.  Note that the element 'name'
-	 * was first in the structure -- Comedi uses this fact to
-	 * extract the name of the board without knowing any details
-	 * about the structure except for its length.
-	 * When a device is attached (by comedi_config), the name
-	 * of the device is given to Comedi, and Comedi tries to
-	 * match it by going through the list of board names.  If
-	 * there is a match, the address of the pointer is put
-	 * into dev->board_ptr and driver->attach() is called.
-	 *
-	 * Note that these are not necessary if you can determine
-	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
-	 * devices are such boards.
-	 */
-	.board_name = &pcmmio_boards[0].name,
-	.offset = sizeof(struct pcmmio_board),
-	.num_names = ARRAY_SIZE(pcmmio_boards),
-};
-
-static int pcmmio_dio_insn_bits(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-static int pcmmio_dio_insn_config(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data);
-
-static irqreturn_t interrupt_pcmmio(int irq, void *d);
-static void pcmmio_stop_intr(struct comedi_device *, struct comedi_subdevice *);
-static int pcmmio_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-static int pcmmio_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
-static int pcmmio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_cmd *cmd);
-
-/* some helper functions to deal with specifics of this device's registers */
-/* sets up/clears ASIC chips to defaults */
-static void init_asics(struct comedi_device *dev);
-static void switch_page(struct comedi_device *dev, int asic, int page);
-#ifdef notused
-static void lock_port(struct comedi_device *dev, int asic, int port);
-static void unlock_port(struct comedi_device *dev, int asic, int port);
-#endif
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int sdev_no, chans_left, n_dio_subdevs, n_subdevs, port, asic,
-	    thisasic_chanct = 0;
-	unsigned long iobase;
-	unsigned int irq[MAX_ASICS];
-
-	iobase = it->options[0];
-	irq[0] = it->options[1];
-
-	printk(KERN_INFO "comedi%d: %s: io: %lx attaching...\n", dev->minor,
-			driver.driver_name, iobase);
-
-	dev->iobase = iobase;
-
-	if (!iobase || !request_region(iobase,
-				       thisboard->total_iosize,
-				       driver.driver_name)) {
-		printk(KERN_ERR "comedi%d: I/O port conflict\n", dev->minor);
-		return -EIO;
-	}
-
-/*
- * Initialize dev->board_name.  Note that we can use the "thisboard"
- * macro now, since we just initialized it in the last line.
- */
-	dev->board_name = thisboard->name;
-
-/*
- * Allocate the private structure area.  alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
-	if (alloc_private(dev, sizeof(struct pcmmio_private)) < 0) {
-		printk(KERN_ERR "comedi%d: cannot allocate private data structure\n",
-				dev->minor);
-		return -ENOMEM;
-	}
-
-	for (asic = 0; asic < MAX_ASICS; ++asic) {
-		devpriv->asics[asic].num = asic;
-		devpriv->asics[asic].iobase =
-		    dev->iobase + 16 + asic * ASIC_IOSIZE;
-		/*
-		 * this gets actually set at the end of this function when we
-		 * request_irqs
-		 */
-		devpriv->asics[asic].irq = 0;
-		spin_lock_init(&devpriv->asics[asic].spinlock);
-	}
-
-	chans_left = CHANS_PER_ASIC * thisboard->dio_num_asics;
-	n_dio_subdevs = CALC_N_DIO_SUBDEVS(chans_left);
-	n_subdevs = n_dio_subdevs + 2;
-	devpriv->sprivs =
-	    kcalloc(n_subdevs, sizeof(struct pcmmio_subdev_private),
-		    GFP_KERNEL);
-	if (!devpriv->sprivs) {
-		printk(KERN_ERR "comedi%d: cannot allocate subdevice private data structures\n",
-				dev->minor);
-		return -ENOMEM;
-	}
-	/*
-	 * Allocate the subdevice structures.  alloc_subdevice() is a
-	 * convenient macro defined in comedidev.h.
-	 *
-	 * Allocate 1 AI + 1 AO + 2 DIO subdevs (24 lines per DIO)
-	 */
-	if (alloc_subdevices(dev, n_subdevs) < 0) {
-		printk(KERN_ERR "comedi%d: cannot allocate subdevice data structures\n",
-				dev->minor);
-		return -ENOMEM;
-	}
-
-	/* First, AI */
-	sdev_no = 0;
-	s = dev->subdevices + sdev_no;
-	s->private = devpriv->sprivs + sdev_no;
-	s->maxdata = (1 << thisboard->ai_bits) - 1;
-	s->range_table = thisboard->ai_range_table;
-	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
-	s->type = COMEDI_SUBD_AI;
-	s->n_chan = thisboard->n_ai_chans;
-	s->len_chanlist = s->n_chan;
-	s->insn_read = thisboard->ai_rinsn;
-	subpriv->iobase = dev->iobase + 0;
-	/* initialize the resource enable register by clearing it */
-	outb(0, subpriv->iobase + 3);
-	outb(0, subpriv->iobase + 4 + 3);
-
-	/* Next, AO */
-	++sdev_no;
-	s = dev->subdevices + sdev_no;
-	s->private = devpriv->sprivs + sdev_no;
-	s->maxdata = (1 << thisboard->ao_bits) - 1;
-	s->range_table = thisboard->ao_range_table;
-	s->subdev_flags = SDF_READABLE;
-	s->type = COMEDI_SUBD_AO;
-	s->n_chan = thisboard->n_ao_chans;
-	s->len_chanlist = s->n_chan;
-	s->insn_read = thisboard->ao_rinsn;
-	s->insn_write = thisboard->ao_winsn;
-	subpriv->iobase = dev->iobase + 8;
-	/* initialize the resource enable register by clearing it */
-	outb(0, subpriv->iobase + 3);
-	outb(0, subpriv->iobase + 4 + 3);
-
-	++sdev_no;
-	port = 0;
-	asic = 0;
-	for (; sdev_no < (int)dev->n_subdevices; ++sdev_no) {
-		int byte_no;
-
-		s = dev->subdevices + sdev_no;
-		s->private = devpriv->sprivs + sdev_no;
-		s->maxdata = 1;
-		s->range_table = &range_digital;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->type = COMEDI_SUBD_DIO;
-		s->insn_bits = pcmmio_dio_insn_bits;
-		s->insn_config = pcmmio_dio_insn_config;
-		s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV);
-		subpriv->dio.intr.asic = -1;
-		subpriv->dio.intr.first_chan = -1;
-		subpriv->dio.intr.asic_chan = -1;
-		subpriv->dio.intr.num_asic_chans = -1;
-		subpriv->dio.intr.active = 0;
-		s->len_chanlist = 1;
-
-		/* save the ioport address for each 'port' of 8 channels in the
-		   subdevice */
-		for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) {
-			if (port >= PORTS_PER_ASIC) {
-				port = 0;
-				++asic;
-				thisasic_chanct = 0;
-			}
-			subpriv->iobases[byte_no] =
-			    devpriv->asics[asic].iobase + port;
-
-			if (thisasic_chanct <
-			    CHANS_PER_PORT * INTR_PORTS_PER_ASIC
-			    && subpriv->dio.intr.asic < 0) {
-				/*
-				 * this is an interrupt subdevice,
-				 * so setup the struct
-				 */
-				subpriv->dio.intr.asic = asic;
-				subpriv->dio.intr.active = 0;
-				subpriv->dio.intr.stop_count = 0;
-				subpriv->dio.intr.first_chan = byte_no * 8;
-				subpriv->dio.intr.asic_chan = thisasic_chanct;
-				subpriv->dio.intr.num_asic_chans =
-				    s->n_chan - subpriv->dio.intr.first_chan;
-				s->cancel = pcmmio_cancel;
-				s->do_cmd = pcmmio_cmd;
-				s->do_cmdtest = pcmmio_cmdtest;
-				s->len_chanlist =
-				    subpriv->dio.intr.num_asic_chans;
-			}
-			thisasic_chanct += CHANS_PER_PORT;
-		}
-		spin_lock_init(&subpriv->dio.intr.spinlock);
-
-		chans_left -= s->n_chan;
-
-		if (!chans_left) {
-			/*
-			 * reset the asic to our first asic,
-			 * to do intr subdevs
-			 */
-			asic = 0;
-			port = 0;
-		}
-
-	}
-
-	init_asics(dev);	/* clear out all the registers, basically */
-
-	for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
-		if (irq[asic]
-		    && request_irq(irq[asic], interrupt_pcmmio,
-				   IRQF_SHARED, thisboard->name, dev)) {
-			int i;
-			/* unroll the allocated irqs.. */
-			for (i = asic - 1; i >= 0; --i) {
-				free_irq(irq[i], dev);
-				devpriv->asics[i].irq = irq[i] = 0;
-			}
-			irq[asic] = 0;
-		}
-		devpriv->asics[asic].irq = irq[asic];
-	}
-
-	dev->irq = irq[0];	/*
-				 * grr.. wish comedi dev struct supported
-				 * multiple irqs..
-				 */
-
-	if (irq[0]) {
-		printk(KERN_DEBUG "comedi%d: irq: %u\n", dev->minor, irq[0]);
-		if (thisboard->dio_num_asics == 2 && irq[1])
-			printk(KERN_DEBUG "comedi%d: second ASIC irq: %u\n",
-					dev->minor, irq[1]);
-	} else {
-		printk(KERN_INFO "comedi%d: (IRQ mode disabled)\n", dev->minor);
-	}
-
-	printk(KERN_INFO "comedi%d: attached\n", dev->minor);
-
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pcmmio_detach(struct comedi_device *dev)
-{
-	int i;
-
-	printk(KERN_INFO "comedi%d: %s: remove\n", dev->minor, driver.driver_name);
-	if (dev->iobase)
-		release_region(dev->iobase, thisboard->total_iosize);
-
-	for (i = 0; i < MAX_ASICS; ++i) {
-		if (devpriv && devpriv->asics[i].irq)
-			free_irq(devpriv->asics[i].irq, dev);
-	}
-
-	if (devpriv && devpriv->sprivs)
-		kfree(devpriv->sprivs);
-
-	return 0;
-}
 
 /* DIO devices are slightly special.  Although it is possible to
  * implement the insn_read/insn_write interface, it is much more
@@ -667,7 +337,7 @@ static int pcmmio_dio_insn_bits(struct comedi_device *dev,
 		}
 #ifdef DAMMIT_ITS_BROKEN
 		/* DEBUG */
-		printk("data_out_byte %02x\n", (unsigned)byte);
+		printk(KERN_DEBUG "data_out_byte %02x\n", (unsigned)byte);
 #endif
 		/* save the digital input lines for this byte.. */
 		s->state |= ((unsigned int)byte) << offset;
@@ -751,6 +421,21 @@ static int pcmmio_dio_insn_config(struct comedi_device *dev,
 	return insn->n;
 }
 
+static void switch_page(struct comedi_device *dev, int asic, int page)
+{
+	if (asic < 0 || asic >= thisboard->dio_num_asics)
+		return;		/* paranoia */
+	if (page < 0 || page >= NUM_PAGES)
+		return;		/* more paranoia */
+
+	devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK;
+	devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET;
+
+	/* now write out the shadow register */
+	outb(devpriv->asics[asic].pagelock,
+	     devpriv->asics[asic].iobase + REG_PAGELOCK);
+}
+
 static void init_asics(struct comedi_device *dev)
 {				/* sets up an
 				   ASIC chip to defaults */
@@ -788,21 +473,6 @@ static void init_asics(struct comedi_device *dev)
 	}
 }
 
-static void switch_page(struct comedi_device *dev, int asic, int page)
-{
-	if (asic < 0 || asic >= thisboard->dio_num_asics)
-		return;		/* paranoia */
-	if (page < 0 || page >= NUM_PAGES)
-		return;		/* more paranoia */
-
-	devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK;
-	devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET;
-
-	/* now write out the shadow register */
-	outb(devpriv->asics[asic].pagelock,
-	     devpriv->asics[asic].iobase + REG_PAGELOCK);
-}
-
 #ifdef notused
 static void lock_port(struct comedi_device *dev, int asic, int port)
 {
@@ -831,6 +501,27 @@ static void unlock_port(struct comedi_device *dev, int asic, int port)
 }
 #endif /* notused */
 
+static void pcmmio_stop_intr(struct comedi_device *dev,
+			     struct comedi_subdevice *s)
+{
+	int nports, firstport, asic, port;
+
+	asic = subpriv->dio.intr.asic;
+	if (asic < 0)
+		return;		/* not an interrupt subdev */
+
+	subpriv->dio.intr.enabled_mask = 0;
+	subpriv->dio.intr.active = 0;
+	s->async->inttrig = 0;
+	nports = subpriv->dio.intr.num_asic_chans / CHANS_PER_PORT;
+	firstport = subpriv->dio.intr.asic_chan / CHANS_PER_PORT;
+	switch_page(dev, asic, PAGE_ENAB);
+	for (port = firstport; port < firstport + nports; ++port) {
+		/* disable all intrs for this subdev.. */
+		outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port);
+	}
+}
+
 static irqreturn_t interrupt_pcmmio(int irq, void *d)
 {
 	int asic, got1 = 0;
@@ -991,27 +682,6 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d)
 	return IRQ_HANDLED;
 }
 
-static void pcmmio_stop_intr(struct comedi_device *dev,
-			     struct comedi_subdevice *s)
-{
-	int nports, firstport, asic, port;
-
-	asic = subpriv->dio.intr.asic;
-	if (asic < 0)
-		return;		/* not an interrupt subdev */
-
-	subpriv->dio.intr.enabled_mask = 0;
-	subpriv->dio.intr.active = 0;
-	s->async->inttrig = 0;
-	nports = subpriv->dio.intr.num_asic_chans / CHANS_PER_PORT;
-	firstport = subpriv->dio.intr.asic_chan / CHANS_PER_PORT;
-	switch_page(dev, asic, PAGE_ENAB);
-	for (port = firstport; port < firstport + nports; ++port) {
-		/* disable all intrs for this subdev.. */
-		outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port);
-	}
-}
-
 static int pcmmio_start_intr(struct comedi_device *dev,
 			     struct comedi_subdevice *s)
 {
@@ -1340,22 +1010,261 @@ static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	return n;
 }
 
+static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int sdev_no, chans_left, n_dio_subdevs, n_subdevs, port, asic,
+	    thisasic_chanct = 0;
+	unsigned long iobase;
+	unsigned int irq[MAX_ASICS];
+
+	iobase = it->options[0];
+	irq[0] = it->options[1];
+
+	printk(KERN_INFO "comedi%d: %s: io: %lx attaching...\n", dev->minor,
+			dev->driver->driver_name, iobase);
+
+	dev->iobase = iobase;
+
+	if (!iobase || !request_region(iobase,
+				       thisboard->total_iosize,
+				       dev->driver->driver_name)) {
+		printk(KERN_ERR "comedi%d: I/O port conflict\n", dev->minor);
+		return -EIO;
+	}
+
 /*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
+ * Initialize dev->board_name.  Note that we can use the "thisboard"
+ * macro now, since we just initialized it in the last line.
  */
-static int __init driver_init_module(void)
-{
-	return comedi_driver_register(&driver);
+	dev->board_name = thisboard->name;
+
+/*
+ * Allocate the private structure area.  alloc_private() is a
+ * convenient macro defined in comedidev.h.
+ */
+	if (alloc_private(dev, sizeof(struct pcmmio_private)) < 0) {
+		printk(KERN_ERR "comedi%d: cannot allocate private data structure\n",
+				dev->minor);
+		return -ENOMEM;
+	}
+
+	for (asic = 0; asic < MAX_ASICS; ++asic) {
+		devpriv->asics[asic].num = asic;
+		devpriv->asics[asic].iobase =
+		    dev->iobase + 16 + asic * ASIC_IOSIZE;
+		/*
+		 * this gets actually set at the end of this function when we
+		 * request_irqs
+		 */
+		devpriv->asics[asic].irq = 0;
+		spin_lock_init(&devpriv->asics[asic].spinlock);
+	}
+
+	chans_left = CHANS_PER_ASIC * thisboard->dio_num_asics;
+	n_dio_subdevs = CALC_N_DIO_SUBDEVS(chans_left);
+	n_subdevs = n_dio_subdevs + 2;
+	devpriv->sprivs =
+	    kcalloc(n_subdevs, sizeof(struct pcmmio_subdev_private),
+		    GFP_KERNEL);
+	if (!devpriv->sprivs) {
+		printk(KERN_ERR "comedi%d: cannot allocate subdevice private data structures\n",
+				dev->minor);
+		return -ENOMEM;
+	}
+	/*
+	 * Allocate the subdevice structures.  alloc_subdevice() is a
+	 * convenient macro defined in comedidev.h.
+	 *
+	 * Allocate 1 AI + 1 AO + 2 DIO subdevs (24 lines per DIO)
+	 */
+	if (alloc_subdevices(dev, n_subdevs) < 0) {
+		printk(KERN_ERR "comedi%d: cannot allocate subdevice data structures\n",
+				dev->minor);
+		return -ENOMEM;
+	}
+
+	/* First, AI */
+	sdev_no = 0;
+	s = dev->subdevices + sdev_no;
+	s->private = devpriv->sprivs + sdev_no;
+	s->maxdata = (1 << thisboard->ai_bits) - 1;
+	s->range_table = thisboard->ai_range_table;
+	s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_DIFF;
+	s->type = COMEDI_SUBD_AI;
+	s->n_chan = thisboard->n_ai_chans;
+	s->len_chanlist = s->n_chan;
+	s->insn_read = thisboard->ai_rinsn;
+	subpriv->iobase = dev->iobase + 0;
+	/* initialize the resource enable register by clearing it */
+	outb(0, subpriv->iobase + 3);
+	outb(0, subpriv->iobase + 4 + 3);
+
+	/* Next, AO */
+	++sdev_no;
+	s = dev->subdevices + sdev_no;
+	s->private = devpriv->sprivs + sdev_no;
+	s->maxdata = (1 << thisboard->ao_bits) - 1;
+	s->range_table = thisboard->ao_range_table;
+	s->subdev_flags = SDF_READABLE;
+	s->type = COMEDI_SUBD_AO;
+	s->n_chan = thisboard->n_ao_chans;
+	s->len_chanlist = s->n_chan;
+	s->insn_read = thisboard->ao_rinsn;
+	s->insn_write = thisboard->ao_winsn;
+	subpriv->iobase = dev->iobase + 8;
+	/* initialize the resource enable register by clearing it */
+	outb(0, subpriv->iobase + 3);
+	outb(0, subpriv->iobase + 4 + 3);
+
+	++sdev_no;
+	port = 0;
+	asic = 0;
+	for (; sdev_no < (int)dev->n_subdevices; ++sdev_no) {
+		int byte_no;
+
+		s = dev->subdevices + sdev_no;
+		s->private = devpriv->sprivs + sdev_no;
+		s->maxdata = 1;
+		s->range_table = &range_digital;
+		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+		s->type = COMEDI_SUBD_DIO;
+		s->insn_bits = pcmmio_dio_insn_bits;
+		s->insn_config = pcmmio_dio_insn_config;
+		s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV);
+		subpriv->dio.intr.asic = -1;
+		subpriv->dio.intr.first_chan = -1;
+		subpriv->dio.intr.asic_chan = -1;
+		subpriv->dio.intr.num_asic_chans = -1;
+		subpriv->dio.intr.active = 0;
+		s->len_chanlist = 1;
+
+		/* save the ioport address for each 'port' of 8 channels in the
+		   subdevice */
+		for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) {
+			if (port >= PORTS_PER_ASIC) {
+				port = 0;
+				++asic;
+				thisasic_chanct = 0;
+			}
+			subpriv->iobases[byte_no] =
+			    devpriv->asics[asic].iobase + port;
+
+			if (thisasic_chanct <
+			    CHANS_PER_PORT * INTR_PORTS_PER_ASIC
+			    && subpriv->dio.intr.asic < 0) {
+				/*
+				 * this is an interrupt subdevice,
+				 * so setup the struct
+				 */
+				subpriv->dio.intr.asic = asic;
+				subpriv->dio.intr.active = 0;
+				subpriv->dio.intr.stop_count = 0;
+				subpriv->dio.intr.first_chan = byte_no * 8;
+				subpriv->dio.intr.asic_chan = thisasic_chanct;
+				subpriv->dio.intr.num_asic_chans =
+				    s->n_chan - subpriv->dio.intr.first_chan;
+				s->cancel = pcmmio_cancel;
+				s->do_cmd = pcmmio_cmd;
+				s->do_cmdtest = pcmmio_cmdtest;
+				s->len_chanlist =
+				    subpriv->dio.intr.num_asic_chans;
+			}
+			thisasic_chanct += CHANS_PER_PORT;
+		}
+		spin_lock_init(&subpriv->dio.intr.spinlock);
+
+		chans_left -= s->n_chan;
+
+		if (!chans_left) {
+			/*
+			 * reset the asic to our first asic,
+			 * to do intr subdevs
+			 */
+			asic = 0;
+			port = 0;
+		}
+
+	}
+
+	init_asics(dev);	/* clear out all the registers, basically */
+
+	for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
+		if (irq[asic]
+		    && request_irq(irq[asic], interrupt_pcmmio,
+				   IRQF_SHARED, thisboard->name, dev)) {
+			int i;
+			/* unroll the allocated irqs.. */
+			for (i = asic - 1; i >= 0; --i) {
+				free_irq(irq[i], dev);
+				devpriv->asics[i].irq = irq[i] = 0;
+			}
+			irq[asic] = 0;
+		}
+		devpriv->asics[asic].irq = irq[asic];
+	}
+
+	dev->irq = irq[0];	/*
+				 * grr.. wish comedi dev struct supported
+				 * multiple irqs..
+				 */
+
+	if (irq[0]) {
+		printk(KERN_DEBUG "comedi%d: irq: %u\n", dev->minor, irq[0]);
+		if (thisboard->dio_num_asics == 2 && irq[1])
+			printk(KERN_DEBUG "comedi%d: second ASIC irq: %u\n",
+					dev->minor, irq[1]);
+	} else {
+		printk(KERN_INFO "comedi%d: (IRQ mode disabled)\n", dev->minor);
+	}
+
+	printk(KERN_INFO "comedi%d: attached\n", dev->minor);
+
+	return 1;
 }
 
-static void __exit driver_cleanup_module(void)
+static void pcmmio_detach(struct comedi_device *dev)
 {
-	comedi_driver_unregister(&driver);
+	int i;
+
+	if (dev->iobase)
+		release_region(dev->iobase, thisboard->total_iosize);
+	for (i = 0; i < MAX_ASICS; ++i) {
+		if (devpriv && devpriv->asics[i].irq)
+			free_irq(devpriv->asics[i].irq, dev);
+	}
+	if (devpriv && devpriv->sprivs)
+		kfree(devpriv->sprivs);
 }
 
-module_init(driver_init_module);
-module_exit(driver_cleanup_module);
+static const struct pcmmio_board pcmmio_boards[] = {
+	{
+		.name		= "pcmmio",
+		.dio_num_asics	= 1,
+		.dio_num_ports	= 6,
+		.total_iosize	= 32,
+		.ai_bits	= 16,
+		.ao_bits	= 16,
+		.n_ai_chans	= 16,
+		.n_ao_chans	= 8,
+		.ai_range_table	= &ranges_ai,
+		.ao_range_table	= &ranges_ao,
+		.ai_rinsn	= ai_rinsn,
+		.ao_rinsn	= ao_rinsn,
+		.ao_winsn	= ao_winsn
+	},
+};
+
+static struct comedi_driver pcmmio_driver = {
+	.driver_name	= "pcmmio",
+	.module		= THIS_MODULE,
+	.attach		= pcmmio_attach,
+	.detach		= pcmmio_detach,
+	.board_name	= &pcmmio_boards[0].name,
+	.offset		= sizeof(struct pcmmio_board),
+	.num_names	= ARRAY_SIZE(pcmmio_boards),
+};
+module_comedi_driver(pcmmio_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 661ba2e03892..623381d50dac 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -155,19 +155,6 @@ struct pcmuio_board {
 	const int num_ports;
 };
 
-static const struct pcmuio_board pcmuio_boards[] = {
-	{
-	 .name = "pcmuio48",
-	 .num_asics = 1,
-	 .num_ports = 6,
-	 },
-	{
-	 .name = "pcmuio96",
-	 .num_asics = 2,
-	 .num_ports = 12,
-	 },
-};
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -218,262 +205,6 @@ struct pcmuio_private {
  */
 #define devpriv ((struct pcmuio_private *)dev->private)
 #define subpriv ((struct pcmuio_subdev_private *)s->private)
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int pcmuio_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int pcmuio_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver = {
-	.driver_name = "pcmuio",
-	.module = THIS_MODULE,
-	.attach = pcmuio_attach,
-	.detach = pcmuio_detach,
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
-	/* Most drivers will support multiple types of boards by
-	 * having an array of board structures.  These were defined
-	 * in pcmuio_boards[] above.  Note that the element 'name'
-	 * was first in the structure -- Comedi uses this fact to
-	 * extract the name of the board without knowing any details
-	 * about the structure except for its length.
-	 * When a device is attached (by comedi_config), the name
-	 * of the device is given to Comedi, and Comedi tries to
-	 * match it by going through the list of board names.  If
-	 * there is a match, the address of the pointer is put
-	 * into dev->board_ptr and driver->attach() is called.
-	 *
-	 * Note that these are not necessary if you can determine
-	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
-	 * devices are such boards.
-	 */
-	.board_name = &pcmuio_boards[0].name,
-	.offset = sizeof(struct pcmuio_board),
-	.num_names = ARRAY_SIZE(pcmuio_boards),
-};
-
-static int pcmuio_dio_insn_bits(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-static int pcmuio_dio_insn_config(struct comedi_device *dev,
-				  struct comedi_subdevice *s,
-				  struct comedi_insn *insn, unsigned int *data);
-
-static irqreturn_t interrupt_pcmuio(int irq, void *d);
-static void pcmuio_stop_intr(struct comedi_device *, struct comedi_subdevice *);
-static int pcmuio_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-static int pcmuio_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
-static int pcmuio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_cmd *cmd);
-
-/* some helper functions to deal with specifics of this device's registers */
-static void init_asics(struct comedi_device *dev);	/* sets up/clears ASIC chips to defaults */
-static void switch_page(struct comedi_device *dev, int asic, int page);
-#ifdef notused
-static void lock_port(struct comedi_device *dev, int asic, int port);
-static void unlock_port(struct comedi_device *dev, int asic, int port);
-#endif
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int sdev_no, chans_left, n_subdevs, port, asic, thisasic_chanct = 0;
-	unsigned long iobase;
-	unsigned int irq[MAX_ASICS];
-
-	iobase = it->options[0];
-	irq[0] = it->options[1];
-	irq[1] = it->options[2];
-
-	dev_dbg(dev->hw_dev, "comedi%d: %s: io: %lx attached\n", dev->minor,
-		driver.driver_name, iobase);
-
-	dev->iobase = iobase;
-
-	if (!iobase || !request_region(iobase,
-				       thisboard->num_asics * ASIC_IOSIZE,
-				       driver.driver_name)) {
-		dev_err(dev->hw_dev, "I/O port conflict\n");
-		return -EIO;
-	}
-
-/*
- * Initialize dev->board_name.  Note that we can use the "thisboard"
- * macro now, since we just initialized it in the last line.
- */
-	dev->board_name = thisboard->name;
-
-/*
- * Allocate the private structure area.  alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
-	if (alloc_private(dev, sizeof(struct pcmuio_private)) < 0) {
-		dev_warn(dev->hw_dev, "cannot allocate private data structure\n");
-		return -ENOMEM;
-	}
-
-	for (asic = 0; asic < MAX_ASICS; ++asic) {
-		devpriv->asics[asic].num = asic;
-		devpriv->asics[asic].iobase = dev->iobase + asic * ASIC_IOSIZE;
-		devpriv->asics[asic].irq = 0;	/* this gets actually set at the end of
-						   this function when we
-						   request_irqs */
-		spin_lock_init(&devpriv->asics[asic].spinlock);
-	}
-
-	chans_left = CHANS_PER_ASIC * thisboard->num_asics;
-	n_subdevs = CALC_N_SUBDEVS(chans_left);
-	devpriv->sprivs =
-	    kcalloc(n_subdevs, sizeof(struct pcmuio_subdev_private),
-		    GFP_KERNEL);
-	if (!devpriv->sprivs) {
-		dev_warn(dev->hw_dev, "cannot allocate subdevice private data structures\n");
-		return -ENOMEM;
-	}
-	/*
-	 * Allocate the subdevice structures.  alloc_subdevice() is a
-	 * convenient macro defined in comedidev.h.
-	 *
-	 * Allocate 2 subdevs (32 + 16 DIO lines) or 3 32 DIO subdevs for the
-	 * 96-channel version of the board.
-	 */
-	if (alloc_subdevices(dev, n_subdevs) < 0) {
-		dev_dbg(dev->hw_dev, "cannot allocate subdevice data structures\n");
-		return -ENOMEM;
-	}
-
-	port = 0;
-	asic = 0;
-	for (sdev_no = 0; sdev_no < (int)dev->n_subdevices; ++sdev_no) {
-		int byte_no;
-
-		s = dev->subdevices + sdev_no;
-		s->private = devpriv->sprivs + sdev_no;
-		s->maxdata = 1;
-		s->range_table = &range_digital;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->type = COMEDI_SUBD_DIO;
-		s->insn_bits = pcmuio_dio_insn_bits;
-		s->insn_config = pcmuio_dio_insn_config;
-		s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV);
-		subpriv->intr.asic = -1;
-		subpriv->intr.first_chan = -1;
-		subpriv->intr.asic_chan = -1;
-		subpriv->intr.num_asic_chans = -1;
-		subpriv->intr.active = 0;
-		s->len_chanlist = 1;
-
-		/* save the ioport address for each 'port' of 8 channels in the
-		   subdevice */
-		for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) {
-			if (port >= PORTS_PER_ASIC) {
-				port = 0;
-				++asic;
-				thisasic_chanct = 0;
-			}
-			subpriv->iobases[byte_no] =
-			    devpriv->asics[asic].iobase + port;
-
-			if (thisasic_chanct <
-			    CHANS_PER_PORT * INTR_PORTS_PER_ASIC
-			    && subpriv->intr.asic < 0) {
-				/* this is an interrupt subdevice, so setup the struct */
-				subpriv->intr.asic = asic;
-				subpriv->intr.active = 0;
-				subpriv->intr.stop_count = 0;
-				subpriv->intr.first_chan = byte_no * 8;
-				subpriv->intr.asic_chan = thisasic_chanct;
-				subpriv->intr.num_asic_chans =
-				    s->n_chan - subpriv->intr.first_chan;
-				dev->read_subdev = s;
-				s->subdev_flags |= SDF_CMD_READ;
-				s->cancel = pcmuio_cancel;
-				s->do_cmd = pcmuio_cmd;
-				s->do_cmdtest = pcmuio_cmdtest;
-				s->len_chanlist = subpriv->intr.num_asic_chans;
-			}
-			thisasic_chanct += CHANS_PER_PORT;
-		}
-		spin_lock_init(&subpriv->intr.spinlock);
-
-		chans_left -= s->n_chan;
-
-		if (!chans_left) {
-			asic = 0;	/* reset the asic to our first asic, to do intr subdevs */
-			port = 0;
-		}
-
-	}
-
-	init_asics(dev);	/* clear out all the registers, basically */
-
-	for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
-		if (irq[asic]
-		    && request_irq(irq[asic], interrupt_pcmuio,
-				   IRQF_SHARED, thisboard->name, dev)) {
-			int i;
-			/* unroll the allocated irqs.. */
-			for (i = asic - 1; i >= 0; --i) {
-				free_irq(irq[i], dev);
-				devpriv->asics[i].irq = irq[i] = 0;
-			}
-			irq[asic] = 0;
-		}
-		devpriv->asics[asic].irq = irq[asic];
-	}
-
-	dev->irq = irq[0];	/* grr.. wish comedi dev struct supported multiple
-				   irqs.. */
-
-	if (irq[0]) {
-		dev_dbg(dev->hw_dev, "irq: %u\n", irq[0]);
-		if (irq[1] && thisboard->num_asics == 2)
-			dev_dbg(dev->hw_dev, "second ASIC irq: %u\n", irq[1]);
-	} else {
-		dev_dbg(dev->hw_dev, "(IRQ mode disabled)\n");
-	}
-
-
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int pcmuio_detach(struct comedi_device *dev)
-{
-	int i;
-
-	dev_dbg(dev->hw_dev, "comedi%d: %s: remove\n", dev->minor,
-		driver.driver_name);
-	if (dev->iobase)
-		release_region(dev->iobase, ASIC_IOSIZE * thisboard->num_asics);
-
-	for (i = 0; i < MAX_ASICS; ++i) {
-		if (devpriv->asics[i].irq)
-			free_irq(devpriv->asics[i].irq, dev);
-	}
-
-	if (devpriv && devpriv->sprivs)
-		kfree(devpriv->sprivs);
-
-	return 0;
-}
 
 /* DIO devices are slightly special.  Although it is possible to
  * implement the insn_read/insn_write interface, it is much more
@@ -621,6 +352,21 @@ static int pcmuio_dio_insn_config(struct comedi_device *dev,
 	return insn->n;
 }
 
+static void switch_page(struct comedi_device *dev, int asic, int page)
+{
+	if (asic < 0 || asic >= thisboard->num_asics)
+		return;		/* paranoia */
+	if (page < 0 || page >= NUM_PAGES)
+		return;		/* more paranoia */
+
+	devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK;
+	devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET;
+
+	/* now write out the shadow register */
+	outb(devpriv->asics[asic].pagelock,
+	     dev->iobase + ASIC_IOSIZE * asic + REG_PAGELOCK);
+}
+
 static void init_asics(struct comedi_device *dev)
 {				/* sets up an
 				   ASIC chip to defaults */
@@ -658,21 +404,6 @@ static void init_asics(struct comedi_device *dev)
 	}
 }
 
-static void switch_page(struct comedi_device *dev, int asic, int page)
-{
-	if (asic < 0 || asic >= thisboard->num_asics)
-		return;		/* paranoia */
-	if (page < 0 || page >= NUM_PAGES)
-		return;		/* more paranoia */
-
-	devpriv->asics[asic].pagelock &= ~REG_PAGE_MASK;
-	devpriv->asics[asic].pagelock |= page << REG_PAGE_BITOFFSET;
-
-	/* now write out the shadow register */
-	outb(devpriv->asics[asic].pagelock,
-	     dev->iobase + ASIC_IOSIZE * asic + REG_PAGELOCK);
-}
-
 #ifdef notused
 static void lock_port(struct comedi_device *dev, int asic, int port)
 {
@@ -700,6 +431,27 @@ static void unlock_port(struct comedi_device *dev, int asic, int port)
 }
 #endif /* notused */
 
+static void pcmuio_stop_intr(struct comedi_device *dev,
+			     struct comedi_subdevice *s)
+{
+	int nports, firstport, asic, port;
+
+	asic = subpriv->intr.asic;
+	if (asic < 0)
+		return;		/* not an interrupt subdev */
+
+	subpriv->intr.enabled_mask = 0;
+	subpriv->intr.active = 0;
+	s->async->inttrig = 0;
+	nports = subpriv->intr.num_asic_chans / CHANS_PER_PORT;
+	firstport = subpriv->intr.asic_chan / CHANS_PER_PORT;
+	switch_page(dev, asic, PAGE_ENAB);
+	for (port = firstport; port < firstport + nports; ++port) {
+		/* disable all intrs for this subdev.. */
+		outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port);
+	}
+}
+
 static irqreturn_t interrupt_pcmuio(int irq, void *d)
 {
 	int asic, got1 = 0;
@@ -852,27 +604,6 @@ static irqreturn_t interrupt_pcmuio(int irq, void *d)
 	return IRQ_HANDLED;
 }
 
-static void pcmuio_stop_intr(struct comedi_device *dev,
-			     struct comedi_subdevice *s)
-{
-	int nports, firstport, asic, port;
-
-	asic = subpriv->intr.asic;
-	if (asic < 0)
-		return;		/* not an interrupt subdev */
-
-	subpriv->intr.enabled_mask = 0;
-	subpriv->intr.active = 0;
-	s->async->inttrig = 0;
-	nports = subpriv->intr.num_asic_chans / CHANS_PER_PORT;
-	firstport = subpriv->intr.asic_chan / CHANS_PER_PORT;
-	switch_page(dev, asic, PAGE_ENAB);
-	for (port = firstport; port < firstport + nports; ++port) {
-		/* disable all intrs for this subdev.. */
-		outb(0, devpriv->asics[asic].iobase + REG_ENAB0 + port);
-	}
-}
-
 static int pcmuio_start_intr(struct comedi_device *dev,
 			     struct comedi_subdevice *s)
 {
@@ -1014,22 +745,205 @@ pcmuio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 	return comedi_pcm_cmdtest(dev, s, cmd);
 }
 
+static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int sdev_no, chans_left, n_subdevs, port, asic, thisasic_chanct = 0;
+	unsigned long iobase;
+	unsigned int irq[MAX_ASICS];
+
+	iobase = it->options[0];
+	irq[0] = it->options[1];
+	irq[1] = it->options[2];
+
+	dev_dbg(dev->hw_dev, "comedi%d: %s: io: %lx attached\n", dev->minor,
+		dev->driver->driver_name, iobase);
+
+	dev->iobase = iobase;
+
+	if (!iobase || !request_region(iobase,
+				       thisboard->num_asics * ASIC_IOSIZE,
+				       dev->driver->driver_name)) {
+		dev_err(dev->hw_dev, "I/O port conflict\n");
+		return -EIO;
+	}
+
 /*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
+ * Initialize dev->board_name.  Note that we can use the "thisboard"
+ * macro now, since we just initialized it in the last line.
  */
-static int __init driver_init_module(void)
-{
-	return comedi_driver_register(&driver);
+	dev->board_name = thisboard->name;
+
+/*
+ * Allocate the private structure area.  alloc_private() is a
+ * convenient macro defined in comedidev.h.
+ */
+	if (alloc_private(dev, sizeof(struct pcmuio_private)) < 0) {
+		dev_warn(dev->hw_dev, "cannot allocate private data structure\n");
+		return -ENOMEM;
+	}
+
+	for (asic = 0; asic < MAX_ASICS; ++asic) {
+		devpriv->asics[asic].num = asic;
+		devpriv->asics[asic].iobase = dev->iobase + asic * ASIC_IOSIZE;
+		devpriv->asics[asic].irq = 0;	/* this gets actually set at the end of
+						   this function when we
+						   request_irqs */
+		spin_lock_init(&devpriv->asics[asic].spinlock);
+	}
+
+	chans_left = CHANS_PER_ASIC * thisboard->num_asics;
+	n_subdevs = CALC_N_SUBDEVS(chans_left);
+	devpriv->sprivs =
+	    kcalloc(n_subdevs, sizeof(struct pcmuio_subdev_private),
+		    GFP_KERNEL);
+	if (!devpriv->sprivs) {
+		dev_warn(dev->hw_dev, "cannot allocate subdevice private data structures\n");
+		return -ENOMEM;
+	}
+	/*
+	 * Allocate the subdevice structures.  alloc_subdevice() is a
+	 * convenient macro defined in comedidev.h.
+	 *
+	 * Allocate 2 subdevs (32 + 16 DIO lines) or 3 32 DIO subdevs for the
+	 * 96-channel version of the board.
+	 */
+	if (alloc_subdevices(dev, n_subdevs) < 0) {
+		dev_dbg(dev->hw_dev, "cannot allocate subdevice data structures\n");
+		return -ENOMEM;
+	}
+
+	port = 0;
+	asic = 0;
+	for (sdev_no = 0; sdev_no < (int)dev->n_subdevices; ++sdev_no) {
+		int byte_no;
+
+		s = dev->subdevices + sdev_no;
+		s->private = devpriv->sprivs + sdev_no;
+		s->maxdata = 1;
+		s->range_table = &range_digital;
+		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+		s->type = COMEDI_SUBD_DIO;
+		s->insn_bits = pcmuio_dio_insn_bits;
+		s->insn_config = pcmuio_dio_insn_config;
+		s->n_chan = min(chans_left, MAX_CHANS_PER_SUBDEV);
+		subpriv->intr.asic = -1;
+		subpriv->intr.first_chan = -1;
+		subpriv->intr.asic_chan = -1;
+		subpriv->intr.num_asic_chans = -1;
+		subpriv->intr.active = 0;
+		s->len_chanlist = 1;
+
+		/* save the ioport address for each 'port' of 8 channels in the
+		   subdevice */
+		for (byte_no = 0; byte_no < PORTS_PER_SUBDEV; ++byte_no, ++port) {
+			if (port >= PORTS_PER_ASIC) {
+				port = 0;
+				++asic;
+				thisasic_chanct = 0;
+			}
+			subpriv->iobases[byte_no] =
+			    devpriv->asics[asic].iobase + port;
+
+			if (thisasic_chanct <
+			    CHANS_PER_PORT * INTR_PORTS_PER_ASIC
+			    && subpriv->intr.asic < 0) {
+				/* this is an interrupt subdevice, so setup the struct */
+				subpriv->intr.asic = asic;
+				subpriv->intr.active = 0;
+				subpriv->intr.stop_count = 0;
+				subpriv->intr.first_chan = byte_no * 8;
+				subpriv->intr.asic_chan = thisasic_chanct;
+				subpriv->intr.num_asic_chans =
+				    s->n_chan - subpriv->intr.first_chan;
+				dev->read_subdev = s;
+				s->subdev_flags |= SDF_CMD_READ;
+				s->cancel = pcmuio_cancel;
+				s->do_cmd = pcmuio_cmd;
+				s->do_cmdtest = pcmuio_cmdtest;
+				s->len_chanlist = subpriv->intr.num_asic_chans;
+			}
+			thisasic_chanct += CHANS_PER_PORT;
+		}
+		spin_lock_init(&subpriv->intr.spinlock);
+
+		chans_left -= s->n_chan;
+
+		if (!chans_left) {
+			asic = 0;	/* reset the asic to our first asic, to do intr subdevs */
+			port = 0;
+		}
+
+	}
+
+	init_asics(dev);	/* clear out all the registers, basically */
+
+	for (asic = 0; irq[0] && asic < MAX_ASICS; ++asic) {
+		if (irq[asic]
+		    && request_irq(irq[asic], interrupt_pcmuio,
+				   IRQF_SHARED, thisboard->name, dev)) {
+			int i;
+			/* unroll the allocated irqs.. */
+			for (i = asic - 1; i >= 0; --i) {
+				free_irq(irq[i], dev);
+				devpriv->asics[i].irq = irq[i] = 0;
+			}
+			irq[asic] = 0;
+		}
+		devpriv->asics[asic].irq = irq[asic];
+	}
+
+	dev->irq = irq[0];	/* grr.. wish comedi dev struct supported multiple
+				   irqs.. */
+
+	if (irq[0]) {
+		dev_dbg(dev->hw_dev, "irq: %u\n", irq[0]);
+		if (irq[1] && thisboard->num_asics == 2)
+			dev_dbg(dev->hw_dev, "second ASIC irq: %u\n", irq[1]);
+	} else {
+		dev_dbg(dev->hw_dev, "(IRQ mode disabled)\n");
+	}
+
+
+	return 1;
 }
 
-static void __exit driver_cleanup_module(void)
+static void pcmuio_detach(struct comedi_device *dev)
 {
-	comedi_driver_unregister(&driver);
+	int i;
+
+	if (dev->iobase)
+		release_region(dev->iobase, ASIC_IOSIZE * thisboard->num_asics);
+	for (i = 0; i < MAX_ASICS; ++i) {
+		if (devpriv->asics[i].irq)
+			free_irq(devpriv->asics[i].irq, dev);
+	}
+	if (devpriv && devpriv->sprivs)
+		kfree(devpriv->sprivs);
 }
 
-module_init(driver_init_module);
-module_exit(driver_cleanup_module);
+static const struct pcmuio_board pcmuio_boards[] = {
+	{
+		.name		= "pcmuio48",
+		.num_asics	= 1,
+		.num_ports	= 6,
+	}, {
+		.name		= "pcmuio96",
+		.num_asics	= 2,
+		.num_ports	= 12,
+	},
+};
+
+static struct comedi_driver pcmuio_driver = {
+	.driver_name	= "pcmuio",
+	.module		= THIS_MODULE,
+	.attach		= pcmuio_attach,
+	.detach		= pcmuio_detach,
+	.board_name	= &pcmuio_boards[0].name,
+	.offset		= sizeof(struct pcmuio_board),
+	.num_names	= ARRAY_SIZE(pcmuio_boards),
+};
+module_comedi_driver(pcmuio_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/poc.c b/drivers/staging/comedi/drivers/poc.c
index 831a576c24aa..e7120480687b 100644
--- a/drivers/staging/comedi/drivers/poc.c
+++ b/drivers/staging/comedi/drivers/poc.c
@@ -41,20 +41,6 @@ Configuration options:
 
 #include <linux/ioport.h>
 
-static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int poc_detach(struct comedi_device *dev);
-static int readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-
-static int dac02_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			  struct comedi_insn *insn, unsigned int *data);
-static int pcl733_insn_bits(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-static int pcl734_insn_bits(struct comedi_device *dev,
-			    struct comedi_subdevice *s,
-			    struct comedi_insn *insn, unsigned int *data);
-
 struct boarddef_struct {
 	const char *name;
 	unsigned int iosize;
@@ -70,108 +56,9 @@ struct boarddef_struct {
 			 struct comedi_insn *, unsigned int *);
 	const struct comedi_lrange *range;
 };
-static const struct boarddef_struct boards[] = {
-	{
-	 .name = "dac02",
-	 .iosize = 8,
-	 /*      .setup = dac02_setup, */
-	 .type = COMEDI_SUBD_AO,
-	 .n_chan = 2,
-	 .n_bits = 12,
-	 .winsn = dac02_ao_winsn,
-	 .rinsn = readback_insn,
-	 .range = &range_unknown,
-	 },
-	{
-	 .name = "pcl733",
-	 .iosize = 4,
-	 .type = COMEDI_SUBD_DI,
-	 .n_chan = 32,
-	 .n_bits = 1,
-	 .insnbits = pcl733_insn_bits,
-	 .range = &range_digital,
-	 },
-	{
-	 .name = "pcl734",
-	 .iosize = 4,
-	 .type = COMEDI_SUBD_DO,
-	 .n_chan = 32,
-	 .n_bits = 1,
-	 .insnbits = pcl734_insn_bits,
-	 .range = &range_digital,
-	 },
-};
 
-#define n_boards ARRAY_SIZE(boards)
 #define this_board ((const struct boarddef_struct *)dev->board_ptr)
 
-static struct comedi_driver driver_poc = {
-	.driver_name = "poc",
-	.module = THIS_MODULE,
-	.attach = poc_attach,
-	.detach = poc_detach,
-	.board_name = &boards[0].name,
-	.num_names = n_boards,
-	.offset = sizeof(boards[0]),
-};
-
-static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	unsigned long iobase;
-	unsigned int iosize;
-
-	iobase = it->options[0];
-	printk(KERN_INFO "comedi%d: poc: using %s iobase 0x%lx\n", dev->minor,
-	       this_board->name, iobase);
-
-	dev->board_name = this_board->name;
-
-	if (iobase == 0) {
-		printk(KERN_ERR "io base address required\n");
-		return -EINVAL;
-	}
-
-	iosize = this_board->iosize;
-	/* check if io addresses are available */
-	if (!request_region(iobase, iosize, "dac02")) {
-		printk(KERN_ERR "I/O port conflict: failed to allocate ports "
-			"0x%lx to 0x%lx\n", iobase, iobase + iosize - 1);
-		return -EIO;
-	}
-	dev->iobase = iobase;
-
-	if (alloc_subdevices(dev, 1) < 0)
-		return -ENOMEM;
-	if (alloc_private(dev, sizeof(unsigned int) * this_board->n_chan) < 0)
-		return -ENOMEM;
-
-	/* analog output subdevice */
-	s = dev->subdevices + 0;
-	s->type = this_board->type;
-	s->n_chan = this_board->n_chan;
-	s->maxdata = (1 << this_board->n_bits) - 1;
-	s->range_table = this_board->range;
-	s->insn_write = this_board->winsn;
-	s->insn_read = this_board->rinsn;
-	s->insn_bits = this_board->insnbits;
-	if (s->type == COMEDI_SUBD_AO || s->type == COMEDI_SUBD_DO)
-		s->subdev_flags = SDF_WRITABLE;
-
-	return 0;
-}
-
-static int poc_detach(struct comedi_device *dev)
-{
-	/* only free stuff if it has been allocated by _attach */
-	if (dev->iobase)
-		release_region(dev->iobase, this_board->iosize);
-
-	printk(KERN_INFO "comedi%d: dac02: remove\n", dev->minor);
-
-	return 0;
-}
-
 static int readback_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			 struct comedi_insn *insn, unsigned int *data)
 {
@@ -248,18 +135,98 @@ static int pcl734_insn_bits(struct comedi_device *dev,
 	return 2;
 }
 
-static int __init driver_poc_init_module(void)
+static int poc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
-	return comedi_driver_register(&driver_poc);
+	struct comedi_subdevice *s;
+	unsigned long iobase;
+	unsigned int iosize;
+
+	iobase = it->options[0];
+	printk(KERN_INFO "comedi%d: poc: using %s iobase 0x%lx\n", dev->minor,
+	       this_board->name, iobase);
+
+	dev->board_name = this_board->name;
+
+	if (iobase == 0) {
+		printk(KERN_ERR "io base address required\n");
+		return -EINVAL;
+	}
+
+	iosize = this_board->iosize;
+	/* check if io addresses are available */
+	if (!request_region(iobase, iosize, "dac02")) {
+		printk(KERN_ERR "I/O port conflict: failed to allocate ports "
+			"0x%lx to 0x%lx\n", iobase, iobase + iosize - 1);
+		return -EIO;
+	}
+	dev->iobase = iobase;
+
+	if (alloc_subdevices(dev, 1) < 0)
+		return -ENOMEM;
+	if (alloc_private(dev, sizeof(unsigned int) * this_board->n_chan) < 0)
+		return -ENOMEM;
+
+	/* analog output subdevice */
+	s = dev->subdevices + 0;
+	s->type = this_board->type;
+	s->n_chan = this_board->n_chan;
+	s->maxdata = (1 << this_board->n_bits) - 1;
+	s->range_table = this_board->range;
+	s->insn_write = this_board->winsn;
+	s->insn_read = this_board->rinsn;
+	s->insn_bits = this_board->insnbits;
+	if (s->type == COMEDI_SUBD_AO || s->type == COMEDI_SUBD_DO)
+		s->subdev_flags = SDF_WRITABLE;
+
+	return 0;
 }
 
-static void __exit driver_poc_cleanup_module(void)
+static void poc_detach(struct comedi_device *dev)
 {
-	comedi_driver_unregister(&driver_poc);
+	if (dev->iobase)
+		release_region(dev->iobase, this_board->iosize);
 }
 
-module_init(driver_poc_init_module);
-module_exit(driver_poc_cleanup_module);
+static const struct boarddef_struct boards[] = {
+	{
+		.name		= "dac02",
+		.iosize		= 8,
+		/* .setup	= dac02_setup, */
+		.type		= COMEDI_SUBD_AO,
+		.n_chan		= 2,
+		.n_bits		= 12,
+		.winsn		= dac02_ao_winsn,
+		.rinsn		= readback_insn,
+		.range		= &range_unknown,
+	}, {
+		.name		= "pcl733",
+		.iosize		= 4,
+		.type		= COMEDI_SUBD_DI,
+		.n_chan		= 32,
+		.n_bits		= 1,
+		.insnbits	= pcl733_insn_bits,
+		.range		= &range_digital,
+	}, {
+		.name		= "pcl734",
+		.iosize		= 4,
+		.type		= COMEDI_SUBD_DO,
+		.n_chan		= 32,
+		.n_bits		= 1,
+		.insnbits	= pcl734_insn_bits,
+		.range		= &range_digital,
+	},
+};
+
+static struct comedi_driver poc_driver = {
+	.driver_name	= "poc",
+	.module		= THIS_MODULE,
+	.attach		= poc_attach,
+	.detach		= poc_detach,
+	.board_name	= &boards[0].name,
+	.num_names	= ARRAY_SIZE(boards),
+	.offset		= sizeof(boards[0]),
+};
+module_comedi_driver(poc_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index e0bb73445dd8..2f130b3095e9 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -181,7 +181,7 @@ static const struct comedi_lrange range_daqp_ao = { 1, {BIP_RANGE(5)} };
 /* comedi interface code */
 
 static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int daqp_detach(struct comedi_device *dev);
+static void daqp_detach(struct comedi_device *dev);
 static struct comedi_driver driver_daqp = {
 	.driver_name = "quatech_daqp_cs",
 	.module = THIS_MODULE,
@@ -922,15 +922,9 @@ static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 1;
 }
 
-/* daqp_detach (called from comedi_comdig) does nothing. If the PCMCIA
- * card is removed, daqp_cs_detach() is called by the pcmcia subsystem.
- */
-
-static int daqp_detach(struct comedi_device *dev)
+static void daqp_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: detaching daqp\n", dev->minor);
-
-	return 0;
+	/* Nothing to cleanup */
 }
 
 /*====================================================================
@@ -1010,8 +1004,6 @@ static void daqp_cs_detach(struct pcmcia_device *link)
 {
 	struct local_info_t *dev = link->priv;
 
-	dev_dbg(&link->dev, "daqp_cs_detach\n");
-
 	dev->stop = 1;
 	daqp_cs_release(link);
 
@@ -1019,7 +1011,7 @@ static void daqp_cs_detach(struct pcmcia_device *link)
 	dev_table[dev->table_index] = NULL;
 	kfree(dev);
 
-}				/* daqp_cs_detach */
+}
 
 static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data)
 {
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 138441960506..1678a0ccb8c1 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -328,14 +328,6 @@ static const struct rtdBoard rtd520Boards[] = {
 	 },
 };
 
-static DEFINE_PCI_DEVICE_TABLE(rtd520_pci_table) = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x7520) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x4520) },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, rtd520_pci_table);
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -347,13 +339,13 @@ MODULE_DEVICE_TABLE(pci, rtd520_pci_table);
 */
 struct rtdPrivate {
 	/* memory mapped board structures */
-	void *las0;
-	void *las1;
-	void *lcfg;
+	void __iomem *las0;
+	void __iomem *las1;
+	void __iomem *lcfg;
 
 	unsigned long intCount;	/* interrupt count */
 	long aiCount;		/* total transfer size (samples) */
-	int transCount;		/* # to tranfer data. 0->1/2FIFO */
+	int transCount;		/* # to transfer data. 0->1/2FIFO */
 	int flags;		/* flag event modes */
 
 	/* PCI device info */
@@ -377,8 +369,11 @@ struct rtdPrivate {
 	u8 utcCtrl[4];		/* crtl mode for 3 utc + read back */
 	u8 dioStatus;		/* could be read back (dio0Ctrl) */
 #ifdef USE_DMA
-	/* Always DMA 1/2 FIFO.  Buffer (dmaBuff?) is (at least) twice that size.
-	   After transferring, interrupt processes 1/2 FIFO and passes to comedi */
+	/*
+	 * Always DMA 1/2 FIFO.  Buffer (dmaBuff?) is (at least) twice that
+	 * size.  After transferring, interrupt processes 1/2 FIFO and
+	 * passes to comedi
+	 */
 	s16 dma0Offset;		/* current processing offset (0, 1/2) */
 	uint16_t *dma0Buff[DMA_CHAIN_COUNT];	/* DMA buffers (for ADC) */
 	dma_addr_t dma0BuffPhysAddr[DMA_CHAIN_COUNT];	/* physical addresses */
@@ -581,7 +576,8 @@ struct rtdPrivate {
 
 /* User output N source select (write only) */
 #define RtdUsrOutSource(dev, n, v) \
-	writel(v, devpriv->las0+((n <= 0) ? LAS0_UOUT0_SELECT : LAS0_UOUT1_SELECT))
+	writel(v, devpriv->las0+((n <= 0) ? LAS0_UOUT0_SELECT : \
+				LAS0_UOUT1_SELECT))
 
 /* Digital IO */
 #define RtdDio0Read(dev) \
@@ -608,7 +604,8 @@ struct rtdPrivate {
 /* Write one data value (sign + 12bit + marker bits) */
 /* Note: matches what DMA would put.  Actual value << 3 */
 #define RtdDacFifoPut(dev, n, v) \
-	writew((v), devpriv->las1 + (((n) == 0) ? LAS1_DAC1_FIFO : LAS1_DAC2_FIFO))
+	writew((v), devpriv->las1 + (((n) == 0) ? LAS1_DAC1_FIFO : \
+				LAS1_DAC2_FIFO))
 
 /* Start single DAC conversion */
 #define RtdDacUpdate(dev, n) \
@@ -625,7 +622,8 @@ struct rtdPrivate {
 
 /* Reset DAC FIFO */
 #define RtdDacClearFifo(dev, n) \
-	writel(0, devpriv->las0+(((n) == 0) ? LAS0_DAC1_RESET : LAS0_DAC2_RESET))
+	writel(0, devpriv->las0+(((n) == 0) ? LAS0_DAC1_RESET : \
+				LAS0_DAC2_RESET))
 
 /* Set source for DMA 0 (write only, shadow?) */
 #define RtdDma0Source(dev, n) \
@@ -705,22 +703,6 @@ struct rtdPrivate {
 #define RtdDma1Status(dev) \
 	readb(devpriv->lcfg+LCFG_DMACSR1)
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attac/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int rtd_detach(struct comedi_device *dev);
-
-static struct comedi_driver rtd520Driver = {
-	.driver_name = DRV_NAME,
-	.module = THIS_MODULE,
-	.attach = rtd_attach,
-	.detach = rtd_detach,
-};
-
 static int rtd_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 			struct comedi_insn *insn, unsigned int *data);
 static int rtd_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
@@ -737,7 +719,10 @@ static int rtd_ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_cmd *cmd);
 static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s);
 static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
-/* static int rtd_ai_poll (struct comedi_device *dev,struct comedi_subdevice *s); */
+/*
+ * static int rtd_ai_poll(struct comedi_device *dev,
+ *			  struct comedi_subdevice *s);
+ */
 static int rtd_ns_to_timer(unsigned int *ns, int roundMode);
 static irqreturn_t rtd_interrupt(int irq, void *d);
 static int rtd520_probe_fifo_depth(struct comedi_device *dev);
@@ -857,7 +842,9 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			DPRINTK("rtd520: PCI latency = %d\n", pci_latency);
 		}
 
-		/* Undocumented EPLD version (doesn't match RTD driver results) */
+		/*
+		 * Undocumented EPLD version (doesn't match RTD driver results)
+		 */
 		/*DPRINTK ("rtd520: Reading epld from %p\n",
 		   devpriv->las0+0);
 		   epld_version = readl (devpriv->las0+0);
@@ -970,9 +957,11 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #ifdef USE_DMA
 	if (dev->irq > 0) {
 		printk("( DMA buff=%d )\n", DMA_CHAIN_COUNT);
-		/* The PLX9080 has 2 DMA controllers, but there could be 4 sources:
-		   ADC, digital, DAC1, and DAC2.  Since only the ADC supports cmd mode
-		   right now, this isn't an issue (yet) */
+		/*
+		 * The PLX9080 has 2 DMA controllers, but there could be
+		 * 4 sources: ADC, digital, DAC1, and DAC2.  Since only the
+		 * ADC supports cmd mode right now, this isn't an issue (yet)
+		 */
 		devpriv->dma0Offset = 0;
 
 		for (index = 0; index < DMA_CHAIN_COUNT; index++) {
@@ -988,10 +977,14 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			}
 			/*DPRINTK ("buff[%d] @ %p virtual, %x PCI\n",
 			   index,
-			   devpriv->dma0Buff[index], devpriv->dma0BuffPhysAddr[index]); */
+			   devpriv->dma0Buff[index],
+			   devpriv->dma0BuffPhysAddr[index]); */
 		}
 
-		/* setup DMA descriptor ring (use cpu_to_le32 for byte ordering?) */
+		/*
+		 * setup DMA descriptor ring (use cpu_to_le32 for byte
+		 * ordering?)
+		 */
 		devpriv->dma0Chain =
 		    pci_alloc_consistent(devpriv->pci_dev,
 					 sizeof(struct plx_dma_desc) *
@@ -1088,30 +1081,12 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 #endif
 }
 
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int rtd_detach(struct comedi_device *dev)
+static void rtd_detach(struct comedi_device *dev)
 {
 #ifdef USE_DMA
 	int index;
 #endif
 
-	DPRINTK("comedi%d: rtd520: removing (%ld ints)\n",
-		dev->minor, (devpriv ? devpriv->intCount : 0L));
-	if (devpriv && devpriv->lcfg) {
-		DPRINTK
-		    ("(int status 0x%x, overrun status 0x%x, fifo status 0x%x)...\n",
-		     0xffff & RtdInterruptStatus(dev),
-		     0xffff & RtdInterruptOverrunStatus(dev),
-		     (0xffff & RtdFifoStatus(dev)) ^ 0x6666);
-	}
-
 	if (devpriv) {
 		/* Shut down any board ops by resetting it */
 #ifdef USE_DMA
@@ -1148,37 +1123,24 @@ static int rtd_detach(struct comedi_device *dev)
 			devpriv->dma0Chain = NULL;
 		}
 #endif /* USE_DMA */
-
-		/* release IRQ */
 		if (dev->irq) {
-			/* disable interrupt controller */
 			RtdPlxInterruptWrite(dev, RtdPlxInterruptRead(dev)
 					     & ~(ICS_PLIE | ICS_DMA0_E |
 						 ICS_DMA1_E));
 			free_irq(dev->irq, dev);
 		}
-
-		/* release all regions that were allocated */
 		if (devpriv->las0)
 			iounmap(devpriv->las0);
-
 		if (devpriv->las1)
 			iounmap(devpriv->las1);
-
 		if (devpriv->lcfg)
 			iounmap(devpriv->lcfg);
-
 		if (devpriv->pci_dev) {
 			if (devpriv->got_regions)
 				comedi_pci_disable(devpriv->pci_dev);
-
 			pci_dev_put(devpriv->pci_dev);
 		}
 	}
-
-	printk(KERN_INFO "comedi%d: rtd520: removed.\n", dev->minor);
-
-	return 0;
 }
 
 /*
@@ -1278,7 +1240,8 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
 		}
 	}
 	if (i == limit) {
-		printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n", DRV_NAME);
+		printk(KERN_INFO "\ncomedi: %s: failed to probe fifo size.\n",
+		       DRV_NAME);
 		return -EIO;
 	}
 	RtdAdcClearFifo(dev);
@@ -1378,9 +1341,10 @@ static int ai_read_n(struct comedi_device *dev, struct comedi_subdevice *s,
 		d = RtdAdcFifoGet(dev);	/* get 2s comp value */
 
 		d = d >> 3;	/* low 3 bits are marker lines */
-		if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan))
-			sample = d + 2048;	/* convert to comedi unsigned data */
-		else
+		if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) {
+			/* convert to comedi unsigned data */
+			sample = d + 2048;
+		} else
 			sample = d;
 
 		if (!comedi_buf_put(s->async, sample))
@@ -1406,9 +1370,10 @@ static int ai_read_dregs(struct comedi_device *dev, struct comedi_subdevice *s)
 		}
 
 		d = d >> 3;	/* low 3 bits are marker lines */
-		if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan))
-			sample = d + 2048;	/* convert to comedi unsigned data */
-		else
+		if (CHAN_ARRAY_TEST(devpriv->chanBipolar, s->async->cur_chan)) {
+			/* convert to comedi unsigned data */
+			sample = d + 2048;
+		} else
 			sample = d;
 
 		if (!comedi_buf_put(s->async, sample))
@@ -1525,7 +1490,9 @@ static int ai_process_dma(struct comedi_device *dev, struct comedi_subdevice *s)
 	comedi_buf_memcpy_to(s->async, 0, dp, n);
 	comedi_buf_write_free(s->async, n);
 
-	/* always at least 1 scan -- 1/2 FIFO is larger than our max scan list */
+	/*
+	 * always at least 1 scan -- 1/2 FIFO is larger than our max scan list
+	 */
 	s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS;
 
 	if (++devpriv->dma0Offset >= DMA_CHAIN_COUNT) {	/* next buffer */
@@ -1989,7 +1956,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 			    (TRANS_TARGET_PERIOD * cmd->chanlist_len) /
 			    cmd->scan_begin_arg;
 			if (devpriv->transCount < cmd->chanlist_len) {
-				/* tranfer after each scan (and avoid 0) */
+				/* transfer after each scan (and avoid 0) */
 				devpriv->transCount = cmd->chanlist_len;
 			} else {	/* make a multiple of scan length */
 				devpriv->transCount =
@@ -2005,12 +1972,12 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 			devpriv->transCount = 0;
 			devpriv->flags &= ~SEND_EOS;
 		} else {
-			/* interrupt for each tranfer */
+			/* interrupt for each transfer */
 			RtdAboutCounter(dev, devpriv->transCount - 1);
 		}
 
 		DPRINTK
-		    ("rtd520: scanLen=%d tranferCount=%d fifoLen=%d\n  scanTime(ns)=%d flags=0x%x\n",
+		    ("rtd520: scanLen=%d transferCount=%d fifoLen=%d\n  scanTime(ns)=%d flags=0x%x\n",
 		     cmd->chanlist_len, devpriv->transCount, devpriv->fifoLen,
 		     cmd->scan_begin_arg, devpriv->flags);
 	} else {		/* unknown timing, just use 1/2 FIFO */
@@ -2348,47 +2315,38 @@ static int rtd_dio_insn_config(struct comedi_device *dev,
 	return 1;
 }
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-static int __devinit rtd520Driver_pci_probe(struct pci_dev *dev,
-					    const struct pci_device_id *ent)
+static struct comedi_driver rtd520_driver = {
+	.driver_name	= "rtd520",
+	.module		= THIS_MODULE,
+	.attach		= rtd_attach,
+	.detach		= rtd_detach,
+};
+
+static int __devinit rtd520_pci_probe(struct pci_dev *dev,
+				      const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, rtd520Driver.driver_name);
+	return comedi_pci_auto_config(dev, &rtd520_driver);
 }
 
-static void __devexit rtd520Driver_pci_remove(struct pci_dev *dev)
+static void __devexit rtd520_pci_remove(struct pci_dev *dev)
 {
 	comedi_pci_auto_unconfig(dev);
 }
 
-static struct pci_driver rtd520Driver_pci_driver = {
-	.id_table = rtd520_pci_table,
-	.probe = &rtd520Driver_pci_probe,
-	.remove = __devexit_p(&rtd520Driver_pci_remove)
+static DEFINE_PCI_DEVICE_TABLE(rtd520_pci_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x7520) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_RTD, 0x4520) },
+	{ 0 }
 };
+MODULE_DEVICE_TABLE(pci, rtd520_pci_table);
 
-static int __init rtd520Driver_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&rtd520Driver);
-	if (retval < 0)
-		return retval;
-
-	rtd520Driver_pci_driver.name = (char *)rtd520Driver.driver_name;
-	return pci_register_driver(&rtd520Driver_pci_driver);
-}
-
-static void __exit rtd520Driver_cleanup_module(void)
-{
-	pci_unregister_driver(&rtd520Driver_pci_driver);
-	comedi_driver_unregister(&rtd520Driver);
-}
-
-module_init(rtd520Driver_init_module);
-module_exit(rtd520Driver_cleanup_module);
+static struct pci_driver rtd520_pci_driver = {
+	.name		= "rtd520",
+	.id_table	= rtd520_pci_table,
+	.probe		= rtd520_pci_probe,
+	.remove		= __devexit_p(rtd520_pci_remove),
+};
+module_comedi_pci_driver(rtd520_driver, rtd520_pci_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c
index 72042b818310..f0eb52a77881 100644
--- a/drivers/staging/comedi/drivers/rti800.c
+++ b/drivers/staging/comedi/drivers/rti800.c
@@ -138,39 +138,8 @@ struct rti800_board {
 	int has_ao;
 };
 
-static const struct rti800_board boardtypes[] = {
-	{"rti800", 0},
-	{"rti815", 1},
-};
-
 #define this_board ((const struct rti800_board *)dev->board_ptr)
 
-static int rti800_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int rti800_detach(struct comedi_device *dev);
-static struct comedi_driver driver_rti800 = {
-	.driver_name = "rti800",
-	.module = THIS_MODULE,
-	.attach = rti800_attach,
-	.detach = rti800_detach,
-	.num_names = ARRAY_SIZE(boardtypes),
-	.board_name = &boardtypes[0].name,
-	.offset = sizeof(struct rti800_board),
-};
-
-static int __init driver_rti800_init_module(void)
-{
-	return comedi_driver_register(&driver_rti800);
-}
-
-static void __exit driver_rti800_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_rti800);
-}
-
-module_init(driver_rti800_init_module);
-module_exit(driver_rti800_cleanup_module);
-
 static irqreturn_t rti800_interrupt(int irq, void *dev);
 
 struct rti800_private {
@@ -474,19 +443,30 @@ static int rti800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int rti800_detach(struct comedi_device *dev)
+static void rti800_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: rti800: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, RTI800_SIZE);
-
 	if (dev->irq)
 		free_irq(dev->irq, dev);
-
-	return 0;
 }
 
+static const struct rti800_board boardtypes[] = {
+	{ "rti800", 0 },
+	{ "rti815", 1 },
+};
+
+static struct comedi_driver rti800_driver = {
+	.driver_name	= "rti800",
+	.module		= THIS_MODULE,
+	.attach		= rti800_attach,
+	.detach		= rti800_detach,
+	.num_names	= ARRAY_SIZE(boardtypes),
+	.board_name	= &boardtypes[0].name,
+	.offset		= sizeof(struct rti800_board),
+};
+module_comedi_driver(rti800_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/rti802.c b/drivers/staging/comedi/drivers/rti802.c
index f59cb11590f6..09da5c21858c 100644
--- a/drivers/staging/comedi/drivers/rti802.c
+++ b/drivers/staging/comedi/drivers/rti802.c
@@ -47,29 +47,6 @@ Configuration Options:
 #define RTI802_DATALOW 1
 #define RTI802_DATAHIGH 2
 
-static int rti802_attach(struct comedi_device *dev,
-			 struct comedi_devconfig *it);
-static int rti802_detach(struct comedi_device *dev);
-static struct comedi_driver driver_rti802 = {
-	.driver_name = "rti802",
-	.module = THIS_MODULE,
-	.attach = rti802_attach,
-	.detach = rti802_detach,
-};
-
-static int __init driver_rti802_init_module(void)
-{
-	return comedi_driver_register(&driver_rti802);
-}
-
-static void __exit driver_rti802_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_rti802);
-}
-
-module_init(driver_rti802_init_module);
-module_exit(driver_rti802_cleanup_module);
-
 struct rti802_private {
 	enum {
 		dac_2comp, dac_straight
@@ -152,16 +129,20 @@ static int rti802_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	return 0;
 }
 
-static int rti802_detach(struct comedi_device *dev)
+static void rti802_detach(struct comedi_device *dev)
 {
-	printk(KERN_INFO "comedi%d: rti802: remove\n", dev->minor);
-
 	if (dev->iobase)
 		release_region(dev->iobase, RTI802_SIZE);
-
-	return 0;
 }
 
+static struct comedi_driver rti802_driver = {
+	.driver_name	= "rti802",
+	.module		= THIS_MODULE,
+	.attach		= rti802_attach,
+	.detach		= rti802_detach,
+};
+module_comedi_driver(rti802_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index 2b34daedc3d7..7a56434eb224 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -230,287 +230,6 @@ struct s526_private {
  */
 #define devpriv ((struct s526_private *)dev->private)
 
-/*
- * The struct comedi_driver structure tells the Comedi core module
- * which functions to call to configure/deconfigure (attach/detach)
- * the board, and also about the kernel module that contains
- * the device code.
- */
-static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int s526_detach(struct comedi_device *dev);
-static struct comedi_driver driver_s526 = {
-	.driver_name = "s526",
-	.module = THIS_MODULE,
-	.attach = s526_attach,
-	.detach = s526_detach,
-/* It is not necessary to implement the following members if you are
- * writing a driver for a ISA PnP or PCI card */
-	/* Most drivers will support multiple types of boards by
-	 * having an array of board structures.  These were defined
-	 * in s526_boards[] above.  Note that the element 'name'
-	 * was first in the structure -- Comedi uses this fact to
-	 * extract the name of the board without knowing any details
-	 * about the structure except for its length.
-	 * When a device is attached (by comedi_config), the name
-	 * of the device is given to Comedi, and Comedi tries to
-	 * match it by going through the list of board names.  If
-	 * there is a match, the address of the pointer is put
-	 * into dev->board_ptr and driver->attach() is called.
-	 *
-	 * Note that these are not necessary if you can determine
-	 * the type of board in software.  ISA PnP, PCI, and PCMCIA
-	 * devices are such boards.
-	 */
-	.board_name = &s526_boards[0].name,
-	.offset = sizeof(struct s526_board),
-	.num_names = ARRAY_SIZE(s526_boards),
-};
-
-static int s526_gpct_rinsn(struct comedi_device *dev,
-			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data);
-static int s526_gpct_insn_config(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn, unsigned int *data);
-static int s526_gpct_winsn(struct comedi_device *dev,
-			   struct comedi_subdevice *s, struct comedi_insn *insn,
-			   unsigned int *data);
-static int s526_ai_insn_config(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-static int s526_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-static int s526_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
-			 struct comedi_insn *insn, unsigned int *data);
-static int s526_dio_insn_bits(struct comedi_device *dev,
-			      struct comedi_subdevice *s,
-			      struct comedi_insn *insn, unsigned int *data);
-static int s526_dio_insn_config(struct comedi_device *dev,
-				struct comedi_subdevice *s,
-				struct comedi_insn *insn, unsigned int *data);
-
-/*
- * Attach is called by the Comedi core to configure the driver
- * for a particular board.  If you specified a board_name array
- * in the driver structure, dev->board_ptr contains that
- * address.
- */
-static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-	struct comedi_subdevice *s;
-	int iobase;
-	int i, n;
-/* short value; */
-/* int subdev_channel = 0; */
-	union cmReg cmReg;
-
-	printk(KERN_INFO "comedi%d: s526: ", dev->minor);
-
-	iobase = it->options[0];
-	if (!iobase || !request_region(iobase, S526_IOSIZE, thisboard->name)) {
-		comedi_error(dev, "I/O port conflict");
-		return -EIO;
-	}
-	dev->iobase = iobase;
-
-	printk("iobase=0x%lx\n", dev->iobase);
-
-	/*** make it a little quieter, exw, 8/29/06
-	for (i = 0; i < S526_NUM_PORTS; i++) {
-		printk("0x%02x: 0x%04x\n", ADDR_REG(s526_ports[i]),
-				inw(ADDR_REG(s526_ports[i])));
-	}
-	***/
-
-/*
- * Initialize dev->board_name.  Note that we can use the "thisboard"
- * macro now, since we just initialized it in the last line.
- */
-	dev->board_ptr = &s526_boards[0];
-
-	dev->board_name = thisboard->name;
-
-/*
- * Allocate the private structure area.  alloc_private() is a
- * convenient macro defined in comedidev.h.
- */
-	if (alloc_private(dev, sizeof(struct s526_private)) < 0)
-		return -ENOMEM;
-
-/*
- * Allocate the subdevice structures.  alloc_subdevice() is a
- * convenient macro defined in comedidev.h.
- */
-	dev->n_subdevices = 4;
-	if (alloc_subdevices(dev, dev->n_subdevices) < 0)
-		return -ENOMEM;
-
-	s = dev->subdevices + 0;
-	/* GENERAL-PURPOSE COUNTER/TIME (GPCT) */
-	s->type = COMEDI_SUBD_COUNTER;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL;
-	/* KG: What does SDF_LSAMPL (see multiq3.c) mean? */
-	s->n_chan = thisboard->gpct_chans;
-	s->maxdata = 0x00ffffff;	/* 24 bit counter */
-	s->insn_read = s526_gpct_rinsn;
-	s->insn_config = s526_gpct_insn_config;
-	s->insn_write = s526_gpct_winsn;
-
-	/* Command are not implemented yet, however they are necessary to
-	   allocate the necessary memory for the comedi_async struct (used
-	   to trigger the GPCT in case of pulsegenerator function */
-	/* s->do_cmd = s526_gpct_cmd; */
-	/* s->do_cmdtest = s526_gpct_cmdtest; */
-	/* s->cancel = s526_gpct_cancel; */
-
-	s = dev->subdevices + 1;
-	/* dev->read_subdev=s; */
-	/* analog input subdevice */
-	s->type = COMEDI_SUBD_AI;
-	/* we support differential */
-	s->subdev_flags = SDF_READABLE | SDF_DIFF;
-	/* channels 0 to 7 are the regular differential inputs */
-	/* channel 8 is "reference 0" (+10V), channel 9 is "reference 1" (0V) */
-	s->n_chan = 10;
-	s->maxdata = 0xffff;
-	s->range_table = &range_bipolar10;
-	s->len_chanlist = 16;	/* This is the maximum chanlist length that
-				   the board can handle */
-	s->insn_read = s526_ai_rinsn;
-	s->insn_config = s526_ai_insn_config;
-
-	s = dev->subdevices + 2;
-	/* analog output subdevice */
-	s->type = COMEDI_SUBD_AO;
-	s->subdev_flags = SDF_WRITABLE;
-	s->n_chan = 4;
-	s->maxdata = 0xffff;
-	s->range_table = &range_bipolar10;
-	s->insn_write = s526_ao_winsn;
-	s->insn_read = s526_ao_rinsn;
-
-	s = dev->subdevices + 3;
-	/* digital i/o subdevice */
-	if (thisboard->have_dio) {
-		s->type = COMEDI_SUBD_DIO;
-		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-		s->n_chan = 8;
-		s->maxdata = 1;
-		s->range_table = &range_digital;
-		s->insn_bits = s526_dio_insn_bits;
-		s->insn_config = s526_dio_insn_config;
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
-	}
-
-	printk(KERN_INFO "attached\n");
-
-	return 1;
-
-#if 0
-	/*  Example of Counter Application */
-	/* One-shot (software trigger) */
-	cmReg.reg.coutSource = 0;	/*  out RCAP */
-	cmReg.reg.coutPolarity = 1;	/*  Polarity inverted */
-	cmReg.reg.autoLoadResetRcap = 1;/*  Auto load 0:disabled, 1:enabled */
-	cmReg.reg.hwCtEnableSource = 3;	/*  NOT RCAP */
-	cmReg.reg.ctEnableCtrl = 2;	/*  Hardware */
-	cmReg.reg.clockSource = 2;	/*  Internal */
-	cmReg.reg.countDir = 1;	/*  Down */
-	cmReg.reg.countDirCtrl = 1;	/*  Software */
-	cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
-	cmReg.reg.preloadRegSel = 0;	/*  PR0 */
-	cmReg.reg.reserved = 0;
-
-	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
-
-	outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel));
-	outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel));
-
-	/*  Reset the counter */
-	outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
-	/*  Load the counter from PR0 */
-	outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
-	/*  Reset RCAP (fires one-shot) */
-	outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel));
-
-#else
-
-	/*  Set Counter Mode Register */
-	cmReg.reg.coutSource = 0;	/*  out RCAP */
-	cmReg.reg.coutPolarity = 0;	/*  Polarity inverted */
-	cmReg.reg.autoLoadResetRcap = 0;	/*  Auto load disabled */
-	cmReg.reg.hwCtEnableSource = 2;	/*  NOT RCAP */
-	cmReg.reg.ctEnableCtrl = 1;	/*  1: Software,  >1 : Hardware */
-	cmReg.reg.clockSource = 3;	/*  x4 */
-	cmReg.reg.countDir = 0;	/*  up */
-	cmReg.reg.countDirCtrl = 0;	/*  quadrature */
-	cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
-	cmReg.reg.preloadRegSel = 0;	/*  PR0 */
-	cmReg.reg.reserved = 0;
-
-	n = 0;
-	printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n",
-		cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
-	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
-	udelay(1000);
-	printk(KERN_INFO "Read back mode reg=0x%04x\n",
-		inw(ADDR_CHAN_REG(REG_C0M, n)));
-
-	/*  Load the pre-load register high word */
-/* value = (short) (0x55); */
-/* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */
-
-	/*  Load the pre-load register low word */
-/* value = (short)(0xaa55); */
-/* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */
-
-	/*  Write the Counter Control Register */
-/* outw(value, ADDR_CHAN_REG(REG_C0C, 0)); */
-
-	/*  Reset the counter if it is software preload */
-	if (cmReg.reg.autoLoadResetRcap == 0) {
-		/*  Reset the counter */
-		outw(0x8000, ADDR_CHAN_REG(REG_C0C, n));
-		/*  Load the counter from PR0 */
-		outw(0x4000, ADDR_CHAN_REG(REG_C0C, n));
-	}
-
-	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
-	udelay(1000);
-	printk(KERN_INFO "Read back mode reg=0x%04x\n",
-			inw(ADDR_CHAN_REG(REG_C0M, n)));
-
-#endif
-	printk(KERN_INFO "Current registres:\n");
-
-	for (i = 0; i < S526_NUM_PORTS; i++) {
-		printk(KERN_INFO "0x%02lx: 0x%04x\n",
-			ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i])));
-	}
-	return 1;
-}
-
-/*
- * _detach is called to deconfigure a device.  It should deallocate
- * resources.
- * This function is also called when _attach() fails, so it should be
- * careful not to release resources that were not necessarily
- * allocated by _attach().  dev->private and dev->subdevices are
- * deallocated automatically by the core.
- */
-static int s526_detach(struct comedi_device *dev)
-{
-	printk(KERN_INFO "comedi%d: s526: remove\n", dev->minor);
-
-	if (dev->iobase > 0)
-		release_region(dev->iobase, S526_IOSIZE);
-
-	return 0;
-}
-
 static int s526_gpct_rinsn(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_insn *insn,
 			   unsigned int *data)
@@ -1023,22 +742,218 @@ static int s526_dio_insn_config(struct comedi_device *dev,
 	return 1;
 }
 
+static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+	int iobase;
+	int i, n;
+/* short value; */
+/* int subdev_channel = 0; */
+	union cmReg cmReg;
+
+	printk(KERN_INFO "comedi%d: s526: ", dev->minor);
+
+	iobase = it->options[0];
+	if (!iobase || !request_region(iobase, S526_IOSIZE, thisboard->name)) {
+		comedi_error(dev, "I/O port conflict");
+		return -EIO;
+	}
+	dev->iobase = iobase;
+
+	printk("iobase=0x%lx\n", dev->iobase);
+
+	/*** make it a little quieter, exw, 8/29/06
+	for (i = 0; i < S526_NUM_PORTS; i++) {
+		printk("0x%02x: 0x%04x\n", ADDR_REG(s526_ports[i]),
+				inw(ADDR_REG(s526_ports[i])));
+	}
+	***/
+
 /*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
+ * Initialize dev->board_name.  Note that we can use the "thisboard"
+ * macro now, since we just initialized it in the last line.
  */
-static int __init driver_s526_init_module(void)
-{
-	return comedi_driver_register(&driver_s526);
+	dev->board_ptr = &s526_boards[0];
+
+	dev->board_name = thisboard->name;
+
+/*
+ * Allocate the private structure area.  alloc_private() is a
+ * convenient macro defined in comedidev.h.
+ */
+	if (alloc_private(dev, sizeof(struct s526_private)) < 0)
+		return -ENOMEM;
+
+/*
+ * Allocate the subdevice structures.  alloc_subdevice() is a
+ * convenient macro defined in comedidev.h.
+ */
+	dev->n_subdevices = 4;
+	if (alloc_subdevices(dev, dev->n_subdevices) < 0)
+		return -ENOMEM;
+
+	s = dev->subdevices + 0;
+	/* GENERAL-PURPOSE COUNTER/TIME (GPCT) */
+	s->type = COMEDI_SUBD_COUNTER;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL;
+	/* KG: What does SDF_LSAMPL (see multiq3.c) mean? */
+	s->n_chan = thisboard->gpct_chans;
+	s->maxdata = 0x00ffffff;	/* 24 bit counter */
+	s->insn_read = s526_gpct_rinsn;
+	s->insn_config = s526_gpct_insn_config;
+	s->insn_write = s526_gpct_winsn;
+
+	/* Command are not implemented yet, however they are necessary to
+	   allocate the necessary memory for the comedi_async struct (used
+	   to trigger the GPCT in case of pulsegenerator function */
+	/* s->do_cmd = s526_gpct_cmd; */
+	/* s->do_cmdtest = s526_gpct_cmdtest; */
+	/* s->cancel = s526_gpct_cancel; */
+
+	s = dev->subdevices + 1;
+	/* dev->read_subdev=s; */
+	/* analog input subdevice */
+	s->type = COMEDI_SUBD_AI;
+	/* we support differential */
+	s->subdev_flags = SDF_READABLE | SDF_DIFF;
+	/* channels 0 to 7 are the regular differential inputs */
+	/* channel 8 is "reference 0" (+10V), channel 9 is "reference 1" (0V) */
+	s->n_chan = 10;
+	s->maxdata = 0xffff;
+	s->range_table = &range_bipolar10;
+	s->len_chanlist = 16;	/* This is the maximum chanlist length that
+				   the board can handle */
+	s->insn_read = s526_ai_rinsn;
+	s->insn_config = s526_ai_insn_config;
+
+	s = dev->subdevices + 2;
+	/* analog output subdevice */
+	s->type = COMEDI_SUBD_AO;
+	s->subdev_flags = SDF_WRITABLE;
+	s->n_chan = 4;
+	s->maxdata = 0xffff;
+	s->range_table = &range_bipolar10;
+	s->insn_write = s526_ao_winsn;
+	s->insn_read = s526_ao_rinsn;
+
+	s = dev->subdevices + 3;
+	/* digital i/o subdevice */
+	if (thisboard->have_dio) {
+		s->type = COMEDI_SUBD_DIO;
+		s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+		s->n_chan = 8;
+		s->maxdata = 1;
+		s->range_table = &range_digital;
+		s->insn_bits = s526_dio_insn_bits;
+		s->insn_config = s526_dio_insn_config;
+	} else {
+		s->type = COMEDI_SUBD_UNUSED;
+	}
+
+	printk(KERN_INFO "attached\n");
+
+	return 1;
+
+#if 0
+	/*  Example of Counter Application */
+	/* One-shot (software trigger) */
+	cmReg.reg.coutSource = 0;	/*  out RCAP */
+	cmReg.reg.coutPolarity = 1;	/*  Polarity inverted */
+	cmReg.reg.autoLoadResetRcap = 1;/*  Auto load 0:disabled, 1:enabled */
+	cmReg.reg.hwCtEnableSource = 3;	/*  NOT RCAP */
+	cmReg.reg.ctEnableCtrl = 2;	/*  Hardware */
+	cmReg.reg.clockSource = 2;	/*  Internal */
+	cmReg.reg.countDir = 1;	/*  Down */
+	cmReg.reg.countDirCtrl = 1;	/*  Software */
+	cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
+	cmReg.reg.preloadRegSel = 0;	/*  PR0 */
+	cmReg.reg.reserved = 0;
+
+	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
+
+	outw(0x0001, ADDR_CHAN_REG(REG_C0H, subdev_channel));
+	outw(0x3C68, ADDR_CHAN_REG(REG_C0L, subdev_channel));
+
+	/*  Reset the counter */
+	outw(0x8000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
+	/*  Load the counter from PR0 */
+	outw(0x4000, ADDR_CHAN_REG(REG_C0C, subdev_channel));
+	/*  Reset RCAP (fires one-shot) */
+	outw(0x0008, ADDR_CHAN_REG(REG_C0C, subdev_channel));
+
+#else
+
+	/*  Set Counter Mode Register */
+	cmReg.reg.coutSource = 0;	/*  out RCAP */
+	cmReg.reg.coutPolarity = 0;	/*  Polarity inverted */
+	cmReg.reg.autoLoadResetRcap = 0;	/*  Auto load disabled */
+	cmReg.reg.hwCtEnableSource = 2;	/*  NOT RCAP */
+	cmReg.reg.ctEnableCtrl = 1;	/*  1: Software,  >1 : Hardware */
+	cmReg.reg.clockSource = 3;	/*  x4 */
+	cmReg.reg.countDir = 0;	/*  up */
+	cmReg.reg.countDirCtrl = 0;	/*  quadrature */
+	cmReg.reg.outputRegLatchCtrl = 0;	/*  latch on read */
+	cmReg.reg.preloadRegSel = 0;	/*  PR0 */
+	cmReg.reg.reserved = 0;
+
+	n = 0;
+	printk(KERN_INFO "Mode reg=0x%04x, 0x%04lx\n",
+		cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
+	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
+	udelay(1000);
+	printk(KERN_INFO "Read back mode reg=0x%04x\n",
+		inw(ADDR_CHAN_REG(REG_C0M, n)));
+
+	/*  Load the pre-load register high word */
+/* value = (short) (0x55); */
+/* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */
+
+	/*  Load the pre-load register low word */
+/* value = (short)(0xaa55); */
+/* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */
+
+	/*  Write the Counter Control Register */
+/* outw(value, ADDR_CHAN_REG(REG_C0C, 0)); */
+
+	/*  Reset the counter if it is software preload */
+	if (cmReg.reg.autoLoadResetRcap == 0) {
+		/*  Reset the counter */
+		outw(0x8000, ADDR_CHAN_REG(REG_C0C, n));
+		/*  Load the counter from PR0 */
+		outw(0x4000, ADDR_CHAN_REG(REG_C0C, n));
+	}
+
+	outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, n));
+	udelay(1000);
+	printk(KERN_INFO "Read back mode reg=0x%04x\n",
+			inw(ADDR_CHAN_REG(REG_C0M, n)));
+
+#endif
+	printk(KERN_INFO "Current registres:\n");
+
+	for (i = 0; i < S526_NUM_PORTS; i++) {
+		printk(KERN_INFO "0x%02lx: 0x%04x\n",
+			ADDR_REG(s526_ports[i]), inw(ADDR_REG(s526_ports[i])));
+	}
+	return 1;
 }
 
-static void __exit driver_s526_cleanup_module(void)
+static void s526_detach(struct comedi_device *dev)
 {
-	comedi_driver_unregister(&driver_s526);
+	if (dev->iobase > 0)
+		release_region(dev->iobase, S526_IOSIZE);
 }
 
-module_init(driver_s526_init_module);
-module_exit(driver_s526_cleanup_module);
+static struct comedi_driver s526_driver = {
+	.driver_name	= "s526",
+	.module		= THIS_MODULE,
+	.attach		= s526_attach,
+	.detach		= s526_detach,
+	.board_name	= &s526_boards[0].name,
+	.offset		= sizeof(struct s526_board),
+	.num_names	= ARRAY_SIZE(s526_boards),
+};
+module_comedi_driver(s526_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 23fc64b9988e..7beb8f6853af 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -79,12 +79,17 @@ INSN_CONFIG instructions:
 #include "comedi_fc.h"
 #include "s626.h"
 
-MODULE_AUTHOR("Gianluca Palli <gpalli@deis.unibo.it>");
-MODULE_DESCRIPTION("Sensoray 626 Comedi driver module");
-MODULE_LICENSE("GPL");
+#define PCI_VENDOR_ID_S626 0x1131
+#define PCI_DEVICE_ID_S626 0x7146
+#define PCI_SUBVENDOR_ID_S626 0x6000
+#define PCI_SUBDEVICE_ID_S626 0x0272
 
 struct s626_board {
 	const char *name;
+	int vendor_id;
+	int device_id;
+	int subvendor_id;
+	int subdevice_id;
 	int ai_chans;
 	int ai_bits;
 	int ao_chans;
@@ -97,6 +102,10 @@ struct s626_board {
 static const struct s626_board s626_boards[] = {
 	{
 	 .name = "s626",
+	 .vendor_id = PCI_VENDOR_ID_S626,
+	 .device_id = PCI_DEVICE_ID_S626,
+	 .subvendor_id = PCI_SUBVENDOR_ID_S626,
+	 .subdevice_id = PCI_SUBDEVICE_ID_S626,
 	 .ai_chans = S626_ADC_CHANNELS,
 	 .ai_bits = 14,
 	 .ao_chans = S626_DAC_CHANNELS,
@@ -108,30 +117,6 @@ static const struct s626_board s626_boards[] = {
 };
 
 #define thisboard ((const struct s626_board *)dev->board_ptr)
-#define PCI_VENDOR_ID_S626 0x1131
-#define PCI_DEVICE_ID_S626 0x7146
-
-/*
- * For devices with vendor:device id == 0x1131:0x7146 you must specify
- * also subvendor:subdevice ids, because otherwise it will conflict with
- * Philips SAA7146 media/dvb based cards.
- */
-static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
-	{PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, 0x6000, 0x0272, 0, 0, 0},
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, s626_pci_table);
-
-static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int s626_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_s626 = {
-	.driver_name = "s626",
-	.module = THIS_MODULE,
-	.attach = s626_attach,
-	.detach = s626_detach,
-};
 
 struct s626_private {
 	struct pci_dev *pdev;
@@ -224,44 +209,6 @@ static struct dio_private *dio_private_word[]={
 #define devpriv ((struct s626_private *)dev->private)
 #define diopriv ((struct dio_private *)s->private)
 
-static int __devinit driver_s626_pci_probe(struct pci_dev *dev,
-					   const struct pci_device_id *ent)
-{
-	return comedi_pci_auto_config(dev, driver_s626.driver_name);
-}
-
-static void __devexit driver_s626_pci_remove(struct pci_dev *dev)
-{
-	comedi_pci_auto_unconfig(dev);
-}
-
-static struct pci_driver driver_s626_pci_driver = {
-	.id_table = s626_pci_table,
-	.probe = &driver_s626_pci_probe,
-	.remove = __devexit_p(&driver_s626_pci_remove)
-};
-
-static int __init driver_s626_init_module(void)
-{
-	int retval;
-
-	retval = comedi_driver_register(&driver_s626);
-	if (retval < 0)
-		return retval;
-
-	driver_s626_pci_driver.name = (char *)driver_s626.driver_name;
-	return pci_register_driver(&driver_s626_pci_driver);
-}
-
-static void __exit driver_s626_cleanup_module(void)
-{
-	pci_unregister_driver(&driver_s626_pci_driver);
-	comedi_driver_unregister(&driver_s626);
-}
-
-module_init(driver_s626_init_module);
-module_exit(driver_s626_cleanup_module);
-
 /* ioctl routines */
 static int s626_ai_insn_config(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
@@ -554,17 +501,17 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	resource_size_t resourceStart;
 	dma_addr_t appdma;
 	struct comedi_subdevice *s;
-	const struct pci_device_id *ids;
 	struct pci_dev *pdev = NULL;
 
 	if (alloc_private(dev, sizeof(struct s626_private)) < 0)
 		return -ENOMEM;
 
-	for (i = 0; i < (ARRAY_SIZE(s626_pci_table) - 1) && !pdev; i++) {
-		ids = &s626_pci_table[i];
+	for (i = 0; i < ARRAY_SIZE(s626_boards) && !pdev; i++) {
 		do {
-			pdev = pci_get_subsys(ids->vendor, ids->device,
-					      ids->subvendor, ids->subdevice,
+			pdev = pci_get_subsys(s626_boards[i].vendor_id,
+					      s626_boards[i].device_id,
+					      s626_boards[i].subvendor_id,
+					      s626_boards[i].subdevice_id,
 					      pdev);
 
 			if ((it->options[0] || it->options[1]) && pdev) {
@@ -1365,7 +1312,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
 	return IRQ_HANDLED;
 }
 
-static int s626_detach(struct comedi_device *dev)
+static void s626_detach(struct comedi_device *dev)
 {
 	if (devpriv) {
 		/* stop ai_command */
@@ -1389,20 +1336,14 @@ static int s626_detach(struct comedi_device *dev)
 
 		if (dev->irq)
 			free_irq(dev->irq, dev);
-
 		if (devpriv->base_addr)
 			iounmap(devpriv->base_addr);
-
 		if (devpriv->pdev) {
 			if (devpriv->got_regions)
 				comedi_pci_disable(devpriv->pdev);
 			pci_dev_put(devpriv->pdev);
 		}
 	}
-
-	DEBUG("s626_detach: S626 detached!\n");
-
-	return 0;
 }
 
 /*
@@ -3367,3 +3308,45 @@ static void CountersInit(struct comedi_device *dev)
 	DEBUG("CountersInit: counters initialized\n");
 
 }
+
+static struct comedi_driver s626_driver = {
+	.driver_name	= "s626",
+	.module		= THIS_MODULE,
+	.attach		= s626_attach,
+	.detach		= s626_detach,
+};
+
+static int __devinit s626_pci_probe(struct pci_dev *dev,
+				    const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, &s626_driver);
+}
+
+static void __devexit s626_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+/*
+ * For devices with vendor:device id == 0x1131:0x7146 you must specify
+ * also subvendor:subdevice ids, because otherwise it will conflict with
+ * Philips SAA7146 media/dvb based cards.
+ */
+static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
+	{ PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626,
+		PCI_SUBVENDOR_ID_S626, PCI_SUBDEVICE_ID_S626, 0, 0, 0 },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, s626_pci_table);
+
+static struct pci_driver s626_pci_driver = {
+	.name		= "s626",
+	.id_table	= s626_pci_table,
+	.probe		= s626_pci_probe,
+	.remove		= __devexit_p(s626_pci_remove),
+};
+module_comedi_pci_driver(s626_driver, s626_pci_driver);
+
+MODULE_AUTHOR("Gianluca Palli <gpalli@deis.unibo.it>");
+MODULE_DESCRIPTION("Sensoray 626 Comedi driver module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c
index d880c2f6fbc1..6342bc5ddb3e 100644
--- a/drivers/staging/comedi/drivers/serial2002.c
+++ b/drivers/staging/comedi/drivers/serial2002.c
@@ -43,20 +43,10 @@ Status: in development
 #include <linux/serial.h>
 #include <linux/poll.h>
 
-/*
- * Board descriptions for two imaginary boards.  Describing the
- * boards in this way is optional, and completely driver-dependent.
- * Some drivers use arrays such as this, other do not.
- */
 struct serial2002_board {
 	const char *name;
 };
 
-static const struct serial2002_board serial2002_boards[] = {
-	{
-	 .name = "serial2002"}
-};
-
 /*
  * Useful for shorthand access to the particular board structure
  */
@@ -89,35 +79,6 @@ struct serial2002_private {
  */
 #define devpriv ((struct serial2002_private *)dev->private)
 
-static int serial2002_attach(struct comedi_device *dev,
-			     struct comedi_devconfig *it);
-static int serial2002_detach(struct comedi_device *dev);
-struct comedi_driver driver_serial2002 = {
-	.driver_name = "serial2002",
-	.module = THIS_MODULE,
-	.attach = serial2002_attach,
-	.detach = serial2002_detach,
-	.board_name = &serial2002_boards[0].name,
-	.offset = sizeof(struct serial2002_board),
-	.num_names = ARRAY_SIZE(serial2002_boards),
-};
-
-static int serial2002_di_rinsn(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int serial2002_do_winsn(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int serial2002_ai_rinsn(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int serial2002_ao_winsn(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-static int serial2002_ao_rinsn(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-
 struct serial_data {
 	enum { is_invalid, is_digital, is_channel } kind;
 	int index;
@@ -887,32 +848,34 @@ static int serial2002_attach(struct comedi_device *dev,
 	return 1;
 }
 
-static int serial2002_detach(struct comedi_device *dev)
+static void serial2002_detach(struct comedi_device *dev)
 {
 	struct comedi_subdevice *s;
 	int i;
 
-	dev_dbg(dev->hw_dev, "comedi%d: remove\n", dev->minor);
 	for (i = 0; i < 5; i++) {
 		s = &dev->subdevices[i];
 		kfree(s->maxdata_list);
 		kfree(s->range_table_list);
 	}
-	return 0;
-}
-
-static int __init driver_serial2002_init_module(void)
-{
-	return comedi_driver_register(&driver_serial2002);
 }
 
-static void __exit driver_serial2002_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_serial2002);
-}
+static const struct serial2002_board serial2002_boards[] = {
+	{
+		.name	= "serial2002"
+	},
+};
 
-module_init(driver_serial2002_init_module);
-module_exit(driver_serial2002_cleanup_module);
+static struct comedi_driver serial2002_driver = {
+	.driver_name	= "serial2002",
+	.module		= THIS_MODULE,
+	.attach		= serial2002_attach,
+	.detach		= serial2002_detach,
+	.board_name	= &serial2002_boards[0].name,
+	.offset		= sizeof(struct serial2002_board),
+	.num_names	= ARRAY_SIZE(serial2002_boards),
+};
+module_comedi_driver(serial2002_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c
index ed69008f0d39..7d13ffa7f4f9 100644
--- a/drivers/staging/comedi/drivers/skel.c
+++ b/drivers/staging/comedi/drivers/skel.c
@@ -156,7 +156,7 @@ struct skel_private {
  * the device code.
  */
 static int skel_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int skel_detach(struct comedi_device *dev);
+static void skel_detach(struct comedi_device *dev);
 static struct comedi_driver driver_skel = {
 	.driver_name = "dummy",
 	.module = THIS_MODULE,
@@ -295,11 +295,8 @@ static int skel_attach(struct comedi_device *dev, struct comedi_devconfig *it)
  * allocated by _attach().  dev->private and dev->subdevices are
  * deallocated automatically by the core.
  */
-static int skel_detach(struct comedi_device *dev)
+static void skel_detach(struct comedi_device *dev)
 {
-	pr_info("comedi%d: skel: remove\n", dev->minor);
-
-	return 0;
 }
 
 /*
@@ -623,7 +620,7 @@ static int skel_dio_insn_config(struct comedi_device *dev,
 static int __devinit driver_skel_pci_probe(struct pci_dev *dev,
 					   const struct pci_device_id *ent)
 {
-	return comedi_pci_auto_config(dev, driver_skel.driver_name);
+	return comedi_pci_auto_config(dev, &driver_skel);
 }
 
 static void __devexit driver_skel_pci_remove(struct pci_dev *dev)
diff --git a/drivers/staging/comedi/drivers/ssv_dnp.c b/drivers/staging/comedi/drivers/ssv_dnp.c
index 526de2efa125..16c4f5a757bb 100644
--- a/drivers/staging/comedi/drivers/ssv_dnp.c
+++ b/drivers/staging/comedi/drivers/ssv_dnp.c
@@ -59,16 +59,6 @@ struct dnp_board {
 	int have_dio;
 };
 
-/* We only support one DNP 'board' variant at the moment */
-static const struct dnp_board dnp_boards[] = {
-{
-	 .name = "dnp-1486",
-	 .ai_chans = 16,
-	 .ai_bits = 12,
-	 .have_dio = 1,
-	 },
-};
-
 /* Useful for shorthand access to the particular board structure ----------- */
 #define thisboard ((const struct dnp_board *)dev->board_ptr)
 
@@ -81,136 +71,6 @@ struct dnp_private_data {
 #define devpriv ((dnp_private *)dev->private)
 
 /* ------------------------------------------------------------------------- */
-/* The struct comedi_driver structure tells the Comedi core module which     */
-/* functions to call to configure/deconfigure (attach/detach) the board, and */
-/* also about the kernel module that contains the device code.               */
-/*                                                                           */
-/* In the following section we define the API of this driver.                */
-/* ------------------------------------------------------------------------- */
-
-static int dnp_attach(struct comedi_device *dev, struct comedi_devconfig *it);
-static int dnp_detach(struct comedi_device *dev);
-
-static struct comedi_driver driver_dnp = {
-	.driver_name = "ssv_dnp",
-	.module = THIS_MODULE,
-	.attach = dnp_attach,
-	.detach = dnp_detach,
-	.board_name = &dnp_boards[0].name,
-	/* only necessary for non-PnP devs   */
-	.offset = sizeof(struct dnp_board),   /* like ISA-PnP, PCI or PCMCIA */
-	.num_names = ARRAY_SIZE(dnp_boards),
-};
-
-static int __init driver_dnp_init_module(void)
-{
-	return comedi_driver_register(&driver_dnp);
-}
-
-static void __exit driver_dnp_cleanup_module(void)
-{
-	comedi_driver_unregister(&driver_dnp);
-}
-
-module_init(driver_dnp_init_module);
-module_exit(driver_dnp_cleanup_module);
-
-static int dnp_dio_insn_bits(struct comedi_device *dev,
-			     struct comedi_subdevice *s,
-			     struct comedi_insn *insn, unsigned int *data);
-
-static int dnp_dio_insn_config(struct comedi_device *dev,
-			       struct comedi_subdevice *s,
-			       struct comedi_insn *insn, unsigned int *data);
-
-/* ------------------------------------------------------------------------- */
-/* Attach is called by comedi core to configure the driver for a particular  */
-/* board. If you specified a board_name array in the driver structure,       */
-/* dev->board_ptr contains that address.                                     */
-/* ------------------------------------------------------------------------- */
-
-static int dnp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
-{
-
-	struct comedi_subdevice *s;
-
-	printk(KERN_INFO "comedi%d: dnp: ", dev->minor);
-
-	/* Autoprobing: this should find out which board we have. Currently  */
-	/* only the 1486 board is supported and autoprobing is not           */
-	/* implemented :-)                                                   */
-	/* dev->board_ptr = dnp_probe(dev); */
-
-	/* Initialize the name of the board.                                 */
-	/* We can use the "thisboard" macro now.                             */
-	dev->board_name = thisboard->name;
-
-	/* Allocate the private structure area. alloc_private() is a         */
-	/* convenient macro defined in comedidev.h.                          */
-	if (alloc_private(dev, sizeof(struct dnp_private_data)) < 0)
-		return -ENOMEM;
-
-	/* Allocate the subdevice structures. alloc_subdevice() is a         */
-	/* convenient macro defined in comedidev.h.                          */
-
-	if (alloc_subdevices(dev, 1) < 0)
-		return -ENOMEM;
-
-	s = dev->subdevices + 0;
-	/* digital i/o subdevice                                             */
-	s->type = COMEDI_SUBD_DIO;
-	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-	s->n_chan = 20;
-	s->maxdata = 1;
-	s->range_table = &range_digital;
-	s->insn_bits = dnp_dio_insn_bits;
-	s->insn_config = dnp_dio_insn_config;
-
-	printk("attached\n");
-
-	/* We use the I/O ports 0x22,0x23 and 0xa3-0xa9, which are always
-	 * allocated for the primary 8259, so we don't need to allocate them
-	 * ourselves. */
-
-	/* configure all ports as input (default)                            */
-	outb(PAMR, CSCIR);
-	outb(0x00, CSCDR);
-	outb(PBMR, CSCIR);
-	outb(0x00, CSCDR);
-	outb(PCMR, CSCIR);
-	outb((inb(CSCDR) & 0xAA), CSCDR);
-
-	return 1;
-
-}
-
-/* ------------------------------------------------------------------------- */
-/* detach is called to deconfigure a device. It should deallocate the        */
-/* resources. This function is also called when _attach() fails, so it       */
-/* should be careful not to release resources that were not necessarily      */
-/* allocated by _attach(). dev->private and dev->subdevices are              */
-/* deallocated automatically by the core.                                    */
-/* ------------------------------------------------------------------------- */
-
-static int dnp_detach(struct comedi_device *dev)
-{
-
-	/* configure all ports as input (default)                            */
-	outb(PAMR, CSCIR);
-	outb(0x00, CSCDR);
-	outb(PBMR, CSCIR);
-	outb(0x00, CSCDR);
-	outb(PCMR, CSCIR);
-	outb((inb(CSCDR) & 0xAA), CSCDR);
-
-	/* announce that we are finished                                     */
-	printk(KERN_INFO "comedi%d: dnp: remove\n", dev->minor);
-
-	return 0;
-
-}
-
-/* ------------------------------------------------------------------------- */
 /* The insn_bits interface allows packed reading/writing of DIO channels.    */
 /* The comedi core can convert between insn_bits and insn_read/write, so you */
 /* are able to use these instructions as well.                               */
@@ -326,6 +186,89 @@ static int dnp_dio_insn_config(struct comedi_device *dev,
 
 }
 
+static int dnp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+{
+	struct comedi_subdevice *s;
+
+	printk(KERN_INFO "comedi%d: dnp: ", dev->minor);
+
+	/* Autoprobing: this should find out which board we have. Currently  */
+	/* only the 1486 board is supported and autoprobing is not           */
+	/* implemented :-)                                                   */
+	/* dev->board_ptr = dnp_probe(dev); */
+
+	/* Initialize the name of the board.                                 */
+	/* We can use the "thisboard" macro now.                             */
+	dev->board_name = thisboard->name;
+
+	/* Allocate the private structure area. alloc_private() is a         */
+	/* convenient macro defined in comedidev.h.                          */
+	if (alloc_private(dev, sizeof(struct dnp_private_data)) < 0)
+		return -ENOMEM;
+
+	/* Allocate the subdevice structures. alloc_subdevice() is a         */
+	/* convenient macro defined in comedidev.h.                          */
+
+	if (alloc_subdevices(dev, 1) < 0)
+		return -ENOMEM;
+
+	s = dev->subdevices + 0;
+	/* digital i/o subdevice                                             */
+	s->type = COMEDI_SUBD_DIO;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+	s->n_chan = 20;
+	s->maxdata = 1;
+	s->range_table = &range_digital;
+	s->insn_bits = dnp_dio_insn_bits;
+	s->insn_config = dnp_dio_insn_config;
+
+	printk("attached\n");
+
+	/* We use the I/O ports 0x22,0x23 and 0xa3-0xa9, which are always
+	 * allocated for the primary 8259, so we don't need to allocate them
+	 * ourselves. */
+
+	/* configure all ports as input (default)                            */
+	outb(PAMR, CSCIR);
+	outb(0x00, CSCDR);
+	outb(PBMR, CSCIR);
+	outb(0x00, CSCDR);
+	outb(PCMR, CSCIR);
+	outb((inb(CSCDR) & 0xAA), CSCDR);
+
+	return 1;
+}
+
+static void dnp_detach(struct comedi_device *dev)
+{
+	outb(PAMR, CSCIR);
+	outb(0x00, CSCDR);
+	outb(PBMR, CSCIR);
+	outb(0x00, CSCDR);
+	outb(PCMR, CSCIR);
+	outb((inb(CSCDR) & 0xAA), CSCDR);
+}
+
+static const struct dnp_board dnp_boards[] = {
+	{
+		.name		= "dnp-1486",
+		.ai_chans	= 16,
+		.ai_bits	= 12,
+		.have_dio	= 1,
+	},
+};
+
+static struct comedi_driver dnp_driver = {
+	.driver_name	= "ssv_dnp",
+	.module		= THIS_MODULE,
+	.attach		= dnp_attach,
+	.detach		= dnp_detach,
+	.board_name	= &dnp_boards[0].name,
+	.offset		= sizeof(struct dnp_board),
+	.num_names	= ARRAY_SIZE(dnp_boards),
+};
+module_comedi_driver(dnp_driver);
+
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index f45824f0d86b..d5f1f22aa708 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -83,96 +83,188 @@ struct unioxx5_subd_priv {
 	unsigned char usp_prev_cn_val[3];	/* previous channel value */
 };
 
-static int unioxx5_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it);
-static int unioxx5_subdev_write(struct comedi_device *dev,
-				struct comedi_subdevice *subdev,
-				struct comedi_insn *insn, unsigned int *data);
-static int unioxx5_subdev_read(struct comedi_device *dev,
-			       struct comedi_subdevice *subdev,
-			       struct comedi_insn *insn, unsigned int *data);
-static int unioxx5_insn_config(struct comedi_device *dev,
-			       struct comedi_subdevice *subdev,
-			       struct comedi_insn *insn, unsigned int *data);
-static int unioxx5_detach(struct comedi_device *dev);
-static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
-				 int subdev_iobase, int minor);
-static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp,
-				   unsigned int *data, int channel, int minor);
-static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp,
-				  unsigned int *data, int channel, int minor);
-/* static void __unioxx5_digital_config(struct unioxx5_subd_priv* usp, int mode); */
-static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp,
-				  unsigned int *data, int channel, int minor);
-static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,
-				 unsigned int *data, int channel, int minor);
-static int __unioxx5_define_chan_offset(int chan_num);
-static void __unioxx5_analog_config(struct unioxx5_subd_priv *usp, int channel);
+static int __unioxx5_define_chan_offset(int chan_num)
+{
 
-static struct comedi_driver unioxx5_driver = {
-	.driver_name = DRIVER_NAME,
-	.module = THIS_MODULE,
-	.attach = unioxx5_attach,
-	.detach = unioxx5_detach
-};
+	if (chan_num < 0 || chan_num > 23)
+		return -1;
 
-static int __init unioxx5_driver_init_module(void)
+	return (chan_num >> 3) + 1;
+}
+
+#if 0				/* not used? */
+static void __unioxx5_digital_config(struct unioxx5_subd_priv *usp, int mode)
 {
-	return comedi_driver_register(&unioxx5_driver);
+	int i, mask;
+
+	mask = (mode == ALL_2_OUTPUT) ? 0xFF : 0x00;
+	printk("COMEDI: mode = %d\n", mask);
+
+	outb(1, usp->usp_iobase + 0);
+
+	for (i = 0; i < 3; i++)
+		outb(mask, usp->usp_iobase + i);
+
+	outb(0, usp->usp_iobase + 0);
 }
+#endif
 
-static void __exit unioxx5_driver_cleanup_module(void)
+/* configure channels for analog i/o (even to output, odd to input) */
+static void __unioxx5_analog_config(struct unioxx5_subd_priv *usp, int channel)
 {
-	comedi_driver_unregister(&unioxx5_driver);
+	int chan_a, chan_b, conf, channel_offset;
+
+	channel_offset = __unioxx5_define_chan_offset(channel);
+	conf = usp->usp_prev_cn_val[channel_offset - 1];
+	chan_a = chan_b = 1;
+
+	/* setting channel A and channel B mask */
+	if (channel % 2 == 0) {
+		chan_a <<= channel & 0x07;
+		chan_b <<= (channel + 1) & 0x07;
+	} else {
+		chan_a <<= (channel - 1) & 0x07;
+		chan_b <<= channel & 0x07;
+	}
+
+	conf |= chan_a;		/* even channel ot output */
+	conf &= ~chan_b;	/* odd channel to input */
+
+	outb(1, usp->usp_iobase + 0);
+	outb(conf, usp->usp_iobase + channel_offset);
+	outb(0, usp->usp_iobase + 0);
+
+	usp->usp_prev_cn_val[channel_offset - 1] = conf;
 }
 
-module_init(unioxx5_driver_init_module);
-module_exit(unioxx5_driver_cleanup_module);
+static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp,
+				  unsigned int *data, int channel, int minor)
+{
+	int channel_offset, mask = 1 << (channel & 0x07);
 
-static int unioxx5_attach(struct comedi_device *dev,
-			  struct comedi_devconfig *it)
+	channel_offset = __unioxx5_define_chan_offset(channel);
+	if (channel_offset < 0) {
+		printk(KERN_ERR
+		       "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
+		       minor, channel);
+		return 0;
+	}
+
+	*data = inb(usp->usp_iobase + channel_offset);
+	*data &= mask;
+
+	/* correct the read value to 0 or 1 */
+	if (channel_offset > 1)
+		channel -= 2 << channel_offset;
+	*data >>= channel;
+	return 1;
+}
+
+static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,
+				 unsigned int *data, int channel, int minor)
 {
-	int iobase, i, n_subd;
-	int id, num, ba;
+	int module_no, read_ch;
+	char control;
 
-	iobase = it->options[0];
+	module_no = channel / 2;
+	read_ch = channel % 2;	/* depend on type of channel (A or B) */
 
-	dev->board_name = DRIVER_NAME;
-	dev->iobase = iobase;
-	iobase += UNIOXX5_SUBDEV_BASE;
+	/* defining if given module can work on input */
+	if (usp->usp_module_type[module_no] & MODULE_OUTPUT_MASK) {
+		printk(KERN_ERR
+		       "comedi%d: module in position %d with id 0x%02x is for output only",
+		       minor, module_no, usp->usp_module_type[module_no]);
+		return 0;
+	}
 
-	/* defining number of subdevices and getting they types (it must be 'g01')  */
-	for (i = n_subd = 0, ba = iobase; i < 4; i++, ba += UNIOXX5_SUBDEV_ODDS) {
-		id = inb(ba + 0xE);
-		num = inb(ba + 0xF);
+	__unioxx5_analog_config(usp, channel);
+	/* sends module number to card(1 .. 12) */
+	outb(module_no + 1, usp->usp_iobase + 5);
+	outb('V', usp->usp_iobase + 6);	/* sends to module (V)erify command */
+	control = inb(usp->usp_iobase);	/* get control register byte */
 
-		if (id != 'g' || num != 1)
-			continue;
+	/* waits while reading four bytes will be allowed */
+	while (!((control = inb(usp->usp_iobase + 0)) & Rx4CA))
+		;
 
-		n_subd++;
+	/* if four bytes readding error occurs - return 0(false) */
+	if ((control & Rx4CA_ERR_MASK)) {
+		printk("COMEDI: 4 bytes error\n");
+		return 0;
 	}
 
-	/* unioxx5 can has from two to four subdevices */
-	if (n_subd < 2) {
+	if (read_ch)
+		*data = inw(usp->usp_iobase + 6);	/* channel B */
+	else
+		*data = inw(usp->usp_iobase + 4);	/* channel A */
+
+	return 1;
+}
+
+static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp,
+				   unsigned int *data, int channel, int minor)
+{
+	int channel_offset, val;
+	int mask = 1 << (channel & 0x07);
+
+	channel_offset = __unioxx5_define_chan_offset(channel);
+	if (channel_offset < 0) {
 		printk(KERN_ERR
-		       "your card must has at least 2 'g01' subdevices\n");
-		return -1;
+		       "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
+		       minor, channel);
+		return 0;
 	}
 
-	if (alloc_subdevices(dev, n_subd) < 0) {
-		printk(KERN_ERR "out of memory\n");
-		return -ENOMEM;
+	/* getting previous written value */
+	val = usp->usp_prev_wr_val[channel_offset - 1];
+
+	if (*data)
+		val |= mask;
+	else
+		val &= ~mask;
+
+	outb(val, usp->usp_iobase + channel_offset);
+	/* saving new written value */
+	usp->usp_prev_wr_val[channel_offset - 1] = val;
+
+	return 1;
+}
+
+static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp,
+				  unsigned int *data, int channel, int minor)
+{
+	int module, i;
+
+	module = channel / 2;	/* definig module number(0 .. 11) */
+	i = (channel % 2) << 1;	/* depends on type of channel (A or B) */
+
+	/* defining if given module can work on output */
+	if (!(usp->usp_module_type[module] & MODULE_OUTPUT_MASK)) {
+		printk(KERN_ERR
+		       "comedi%d: module in position %d with id 0x%0x is for input only!\n",
+		       minor, module, usp->usp_module_type[module]);
+		return 0;
 	}
 
-	/* initializing each of for same subdevices */
-	for (i = 0; i < n_subd; i++, iobase += UNIOXX5_SUBDEV_ODDS) {
-		if (__unioxx5_subdev_init(&dev->subdevices[i], iobase,
-					  dev->minor) < 0)
-			return -1;
+	__unioxx5_analog_config(usp, channel);
+	/* saving minor byte */
+	usp->usp_extra_data[module][i++] = (unsigned char)(*data & 0x00FF);
+	/* saving major byte */
+	usp->usp_extra_data[module][i] = (unsigned char)((*data & 0xFF00) >> 8);
+
+	/* while(!((inb(usp->usp_iobase + 0)) & TxBE)); */
+	/* sending module number to card(1 .. 12) */
+	outb(module + 1, usp->usp_iobase + 5);
+	outb('W', usp->usp_iobase + 6);	/* sends (W)rite command to module */
+
+	/* sending for bytes to module(one byte per cycle iteration) */
+	for (i = 0; i < 4; i++) {
+		while (!((inb(usp->usp_iobase + 0)) & TxBE))
+			;	/* waits while writting will be allowed */
+		outb(usp->usp_extra_data[module][i], usp->usp_iobase + 6);
 	}
 
-	printk(KERN_INFO "attached\n");
-	return 0;
+	return 1;
 }
 
 static int unioxx5_subdev_read(struct comedi_device *dev,
@@ -275,22 +367,6 @@ static int unioxx5_insn_config(struct comedi_device *dev,
 	return 0;
 }
 
-static int unioxx5_detach(struct comedi_device *dev)
-{
-	int i;
-	struct comedi_subdevice *subdev;
-	struct unioxx5_subd_priv *usp;
-
-	for (i = 0; i < dev->n_subdevices; i++) {
-		subdev = &dev->subdevices[i];
-		usp = subdev->private;
-		release_region(usp->usp_iobase, UNIOXX5_SIZE);
-		kfree(subdev->private);
-	}
-
-	return 0;
-}
-
 /* initializing subdevice with given address */
 static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
 				 int subdev_iobase, int minor)
@@ -362,196 +438,73 @@ static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
 	return 0;
 }
 
-static int __unioxx5_digital_write(struct unioxx5_subd_priv *usp,
-				   unsigned int *data, int channel, int minor)
+static int unioxx5_attach(struct comedi_device *dev,
+			  struct comedi_devconfig *it)
 {
-	int channel_offset, val;
-	int mask = 1 << (channel & 0x07);
-
-	channel_offset = __unioxx5_define_chan_offset(channel);
-	if (channel_offset < 0) {
-		printk(KERN_ERR
-		       "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
-		       minor, channel);
-		return 0;
-	}
-
-	/* getting previous written value */
-	val = usp->usp_prev_wr_val[channel_offset - 1];
+	int iobase, i, n_subd;
+	int id, num, ba;
 
-	if (*data)
-		val |= mask;
-	else
-		val &= ~mask;
+	iobase = it->options[0];
 
-	outb(val, usp->usp_iobase + channel_offset);
-	/* saving new written value */
-	usp->usp_prev_wr_val[channel_offset - 1] = val;
+	dev->board_name = DRIVER_NAME;
+	dev->iobase = iobase;
+	iobase += UNIOXX5_SUBDEV_BASE;
 
-	return 1;
-}
+	/* defining number of subdevices and getting they types (it must be 'g01')  */
+	for (i = n_subd = 0, ba = iobase; i < 4; i++, ba += UNIOXX5_SUBDEV_ODDS) {
+		id = inb(ba + 0xE);
+		num = inb(ba + 0xF);
 
-/* function for digital reading */
-static int __unioxx5_digital_read(struct unioxx5_subd_priv *usp,
-				  unsigned int *data, int channel, int minor)
-{
-	int channel_offset, mask = 1 << (channel & 0x07);
+		if (id != 'g' || num != 1)
+			continue;
 
-	channel_offset = __unioxx5_define_chan_offset(channel);
-	if (channel_offset < 0) {
-		printk(KERN_ERR
-		       "comedi%d: undefined channel %d. channel range is 0 .. 23\n",
-		       minor, channel);
-		return 0;
+		n_subd++;
 	}
 
-	*data = inb(usp->usp_iobase + channel_offset);
-	*data &= mask;
-
-	if (channel_offset > 1)
-		channel -= 2 << channel_offset;	/* this operation is created for correct readed value to 0 or 1 */
-	*data >>= channel;
-	return 1;
-}
-
-#if 0				/* not used? */
-static void __unioxx5_digital_config(struct unioxx5_subd_priv *usp, int mode)
-{
-	int i, mask;
-
-	mask = (mode == ALL_2_OUTPUT) ? 0xFF : 0x00;
-	printk("COMEDI: mode = %d\n", mask);
-
-	outb(1, usp->usp_iobase + 0);
-
-	for (i = 0; i < 3; i++)
-		outb(mask, usp->usp_iobase + i);
-
-	outb(0, usp->usp_iobase + 0);
-}
-#endif
-
-static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp,
-				  unsigned int *data, int channel, int minor)
-{
-	int module, i;
-
-	module = channel / 2;	/* definig module number(0 .. 11) */
-	i = (channel % 2) << 1;	/* depends on type of channel (A or B) */
-
-	/* defining if given module can work on output */
-	if (!(usp->usp_module_type[module] & MODULE_OUTPUT_MASK)) {
+	/* unioxx5 can has from two to four subdevices */
+	if (n_subd < 2) {
 		printk(KERN_ERR
-		       "comedi%d: module in position %d with id 0x%0x is for input only!\n",
-		       minor, module, usp->usp_module_type[module]);
-		return 0;
-	}
-
-	__unioxx5_analog_config(usp, channel);
-	/* saving minor byte */
-	usp->usp_extra_data[module][i++] = (unsigned char)(*data & 0x00FF);
-	/* saving major byte */
-	usp->usp_extra_data[module][i] = (unsigned char)((*data & 0xFF00) >> 8);
-
-	/* while(!((inb(usp->usp_iobase + 0)) & TxBE)); */
-	/* sending module number to card(1 .. 12) */
-	outb(module + 1, usp->usp_iobase + 5);
-	outb('W', usp->usp_iobase + 6);	/* sends (W)rite command to module */
-
-	/* sending for bytes to module(one byte per cycle iteration) */
-	for (i = 0; i < 4; i++) {
-		while (!((inb(usp->usp_iobase + 0)) & TxBE))
-			;	/* waits while writting will be allowed */
-		outb(usp->usp_extra_data[module][i], usp->usp_iobase + 6);
+		       "your card must has at least 2 'g01' subdevices\n");
+		return -1;
 	}
 
-	return 1;
-}
-
-static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,
-				 unsigned int *data, int channel, int minor)
-{
-	int module_no, read_ch;
-	char control;
-
-	module_no = channel / 2;
-	read_ch = channel % 2;	/* depend on type of channel (A or B) */
-
-	/* defining if given module can work on input */
-	if (usp->usp_module_type[module_no] & MODULE_OUTPUT_MASK) {
-		printk(KERN_ERR
-		       "comedi%d: module in position %d with id 0x%02x is for output only",
-		       minor, module_no, usp->usp_module_type[module_no]);
-		return 0;
+	if (alloc_subdevices(dev, n_subd) < 0) {
+		printk(KERN_ERR "out of memory\n");
+		return -ENOMEM;
 	}
 
-	__unioxx5_analog_config(usp, channel);
-	/* sends module number to card(1 .. 12) */
-	outb(module_no + 1, usp->usp_iobase + 5);
-	outb('V', usp->usp_iobase + 6);	/* sends to module (V)erify command */
-	control = inb(usp->usp_iobase);	/* get control register byte */
-
-	/* waits while reading four bytes will be allowed */
-	while (!((control = inb(usp->usp_iobase + 0)) & Rx4CA))
-		;
-
-	/* if four bytes readding error occurs - return 0(false) */
-	if ((control & Rx4CA_ERR_MASK)) {
-		printk("COMEDI: 4 bytes error\n");
-		return 0;
+	/* initializing each of for same subdevices */
+	for (i = 0; i < n_subd; i++, iobase += UNIOXX5_SUBDEV_ODDS) {
+		if (__unioxx5_subdev_init(&dev->subdevices[i], iobase,
+					  dev->minor) < 0)
+			return -1;
 	}
 
-	if (read_ch)
-		*data = inw(usp->usp_iobase + 6);	/* channel B */
-	else
-		*data = inw(usp->usp_iobase + 4);	/* channel A */
-
-	return 1;
+	printk(KERN_INFO "attached\n");
+	return 0;
 }
 
-/* configure channels for analog i/o (even to output, odd to input) */
-static void __unioxx5_analog_config(struct unioxx5_subd_priv *usp, int channel)
+static void unioxx5_detach(struct comedi_device *dev)
 {
-	int chan_a, chan_b, conf, channel_offset;
-
-	channel_offset = __unioxx5_define_chan_offset(channel);
-	conf = usp->usp_prev_cn_val[channel_offset - 1];
-	chan_a = chan_b = 1;
+	int i;
+	struct comedi_subdevice *subdev;
+	struct unioxx5_subd_priv *usp;
 
-	/* setting channel A and channel B mask */
-	if (channel % 2 == 0) {
-		chan_a <<= channel & 0x07;
-		chan_b <<= (channel + 1) & 0x07;
-	} else {
-		chan_a <<= (channel - 1) & 0x07;
-		chan_b <<= channel & 0x07;
+	for (i = 0; i < dev->n_subdevices; i++) {
+		subdev = &dev->subdevices[i];
+		usp = subdev->private;
+		release_region(usp->usp_iobase, UNIOXX5_SIZE);
+		kfree(subdev->private);
 	}
-
-	conf |= chan_a;		/* even channel ot output */
-	conf &= ~chan_b;	/* odd channel to input */
-
-	outb(1, usp->usp_iobase + 0);
-	outb(conf, usp->usp_iobase + channel_offset);
-	outb(0, usp->usp_iobase + 0);
-
-	usp->usp_prev_cn_val[channel_offset - 1] = conf;
 }
 
-/*                                                    *\
- * this function defines if the given channel number  *
- * enters in default numeric interspace(from 0 to 23) *
- * and it returns address offset for usage needed     *
- * channel.                                           *
-\*                                                    */
-
-static int __unioxx5_define_chan_offset(int chan_num)
-{
-
-	if (chan_num < 0 || chan_num > 23)
-		return -1;
-
-	return (chan_num >> 3) + 1;
-}
+static struct comedi_driver unioxx5_driver = {
+	.driver_name	= DRIVER_NAME,
+	.module		= THIS_MODULE,
+	.attach		= unioxx5_attach,
+	.detach		= unioxx5_detach,
+};
+module_comedi_driver(unioxx5_driver);
 
 MODULE_AUTHOR("Comedi http://www.comedi.org");
 MODULE_DESCRIPTION("Comedi low-level driver");
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index bf62e0dd6f69..13d9fd3efcfd 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -317,6 +317,8 @@ static struct usbduxsub usbduxsub[NUMUSBDUX];
 
 static DEFINE_SEMAPHORE(start_stop_sem);
 
+static struct comedi_driver driver_usbdux;	/* see below for initializer */
+
 /*
  * Stops the data acquision
  * It should be safe to call this function from any context
@@ -2304,11 +2306,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
 						     void *context)
 {
 	struct usbduxsub *usbduxsub_tmp = context;
-	struct usb_device *usbdev = usbduxsub_tmp->usbdev;
+	struct usb_interface *uinterf = usbduxsub_tmp->interface;
 	int ret;
 
 	if (fw == NULL) {
-		dev_err(&usbdev->dev,
+		dev_err(&uinterf->dev,
 			"Firmware complete handler without firmware!\n");
 		return;
 	}
@@ -2320,11 +2322,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
 	ret = firmwareUpload(usbduxsub_tmp, fw->data, fw->size);
 
 	if (ret) {
-		dev_err(&usbdev->dev,
+		dev_err(&uinterf->dev,
 			"Could not upload firmware (err=%d)\n", ret);
 		goto out;
 	}
-	comedi_usb_auto_config(usbdev, BOARDNAME);
+	comedi_usb_auto_config(uinterf, &driver_usbdux);
  out:
 	release_firmware(fw);
 }
@@ -2606,7 +2608,7 @@ static void usbduxsub_disconnect(struct usb_interface *intf)
 		dev_err(&intf->dev, "comedi_: BUG! called with wrong ptr!!!\n");
 		return;
 	}
-	comedi_usb_auto_unconfig(udev);
+	comedi_usb_auto_unconfig(intf);
 	down(&start_stop_sem);
 	down(&usbduxsub_tmp->sem);
 	tidy_up(usbduxsub_tmp);
@@ -2615,46 +2617,21 @@ static void usbduxsub_disconnect(struct usb_interface *intf)
 	dev_dbg(&intf->dev, "comedi_: disconnected from the usb\n");
 }
 
-/* is called when comedi-config is called */
-static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
+/* common part of attach and attach_usb */
+static int usbdux_attach_common(struct comedi_device *dev,
+				struct usbduxsub *udev,
+				void *aux_data, int aux_len)
 {
 	int ret;
-	int index;
-	int i;
-	struct usbduxsub *udev;
-
 	struct comedi_subdevice *s = NULL;
-	dev->private = NULL;
-
-	down(&start_stop_sem);
-	/* find a valid device which has been detected by the probe function of
-	 * the usb */
-	index = -1;
-	for (i = 0; i < NUMUSBDUX; i++) {
-		if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) {
-			index = i;
-			break;
-		}
-	}
 
-	if (index < 0) {
-		printk(KERN_ERR "comedi%d: usbdux: error: attach failed, no "
-		       "usbdux devs connected to the usb bus.\n", dev->minor);
-		up(&start_stop_sem);
-		return -ENODEV;
-	}
-
-	udev = &usbduxsub[index];
 	down(&udev->sem);
 	/* pointer back to the corresponding comedi device */
 	udev->comedidev = dev;
 
 	/* trying to upload the firmware into the chip */
-	if (comedi_aux_data(it->options, 0) &&
-	    it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) {
-		firmwareUpload(udev, comedi_aux_data(it->options, 0),
-			       it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]);
-	}
+	if (aux_data)
+		firmwareUpload(udev, aux_data, aux_len);
 
 	dev->board_name = BOARDNAME;
 
@@ -2673,13 +2650,9 @@ static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		dev_err(&udev->interface->dev,
 			"comedi%d: error alloc space for subdev\n", dev->minor);
 		up(&udev->sem);
-		up(&start_stop_sem);
 		return ret;
 	}
 
-	dev_info(&udev->interface->dev,
-		 "comedi%d: usb-device %d is attached to comedi.\n",
-		 dev->minor, index);
 	/* private structure is also simply the usb-structure */
 	dev->private = udev;
 
@@ -2776,44 +2749,91 @@ static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	up(&udev->sem);
 
-	up(&start_stop_sem);
-
 	dev_info(&udev->interface->dev, "comedi%d: attached to usbdux.\n",
 		 dev->minor);
 
 	return 0;
 }
 
-static int usbdux_detach(struct comedi_device *dev)
+/* is called when comedi-config is called */
+static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
-	struct usbduxsub *usbduxsub_tmp;
+	int ret;
+	int index;
+	int i;
+	void *aux_data;
+	int aux_len;
 
-	if (!dev) {
-		printk(KERN_ERR
-		       "comedi?: usbdux: detach without dev variable...\n");
-		return -EFAULT;
+	dev->private = NULL;
+
+	aux_data = comedi_aux_data(it->options, 0);
+	aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH];
+	if (aux_data == NULL)
+		aux_len = 0;
+	else if (aux_len == 0)
+		aux_data = NULL;
+
+	down(&start_stop_sem);
+	/* find a valid device which has been detected by the probe function of
+	 * the usb */
+	index = -1;
+	for (i = 0; i < NUMUSBDUX; i++) {
+		if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) {
+			index = i;
+			break;
+		}
 	}
 
-	usbduxsub_tmp = dev->private;
-	if (!usbduxsub_tmp) {
+	if (index < 0) {
 		printk(KERN_ERR
-		       "comedi?: usbdux: detach without ptr to usbduxsub[]\n");
-		return -EFAULT;
-	}
+		       "comedi%d: usbdux: error: attach failed, no usbdux devs connected to the usb bus.\n",
+		       dev->minor);
+		ret = -ENODEV;
+	} else
+		ret = usbdux_attach_common(dev, &usbduxsub[index],
+					   aux_data, aux_len);
+	up(&start_stop_sem);
+	return ret;
+}
 
-	dev_dbg(&usbduxsub_tmp->interface->dev, "comedi%d: detach usb device\n",
-		dev->minor);
+/* is called from comedi_usb_auto_config() */
+static int usbdux_attach_usb(struct comedi_device *dev,
+			     struct usb_interface *uinterf)
+{
+	int ret;
+	struct usbduxsub *this_usbduxsub;
 
-	down(&usbduxsub_tmp->sem);
-	/* Don't allow detach to free the private structure */
-	/* It's one entry of of usbduxsub[] */
 	dev->private = NULL;
-	usbduxsub_tmp->attached = 0;
-	usbduxsub_tmp->comedidev = NULL;
-	dev_dbg(&usbduxsub_tmp->interface->dev,
-		"comedi%d: detach: successfully removed\n", dev->minor);
-	up(&usbduxsub_tmp->sem);
-	return 0;
+
+	down(&start_stop_sem);
+	this_usbduxsub = usb_get_intfdata(uinterf);
+	if (!this_usbduxsub || !this_usbduxsub->probed) {
+		printk(KERN_ERR
+		       "comedi%d: usbdux: error: attach_usb failed, not connected\n",
+		       dev->minor);
+		ret = -ENODEV;
+	} else if (this_usbduxsub->attached) {
+		printk(KERN_ERR
+		       "comedi%d: usbdux: error: attach_usb failed, already attached\n",
+		       dev->minor);
+		ret = -ENODEV;
+	} else
+		ret = usbdux_attach_common(dev, this_usbduxsub, NULL, 0);
+	up(&start_stop_sem);
+	return ret;
+}
+
+static void usbdux_detach(struct comedi_device *dev)
+{
+	struct usbduxsub *usb = dev->private;
+
+	if (usb) {
+		down(&usb->sem);
+		dev->private = NULL;
+		usb->attached = 0;
+		usb->comedidev = NULL;
+		up(&usb->sem);
+	}
 }
 
 /* main driver struct */
@@ -2822,6 +2842,7 @@ static struct comedi_driver driver_usbdux = {
 	.module = THIS_MODULE,
 	.attach = usbdux_attach,
 	.detach = usbdux_detach,
+	.attach_usb = usbdux_attach_usb,
 };
 
 /* Table with the USB-devices: just now only testing IDs */
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 2a8e725b7859..7b1d21a6fc53 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -201,6 +201,8 @@ static struct usbduxfastsub_s usbduxfastsub[NUMUSBDUXFAST];
 
 static DEFINE_SEMAPHORE(start_stop_sem);
 
+static struct comedi_driver driver_usbduxfast;	/* see below for initializer */
+
 /*
  * bulk transfers to usbduxfast
  */
@@ -453,14 +455,15 @@ static int usbduxfastsub_start(struct usbduxfastsub_s *udfs)
 	/* 7f92 to zero */
 	local_transfer_buffer[0] = 0;
 	/* bRequest, "Firmware" */
-	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE,
-				VENDOR_DIR_OUT,	/* bmRequestType */
-				USBDUXFASTSUB_CPUCS,	/* Value */
-				0x0000,	/* Index */
-				/* address of the transfer buffer */
-				local_transfer_buffer,
-				1,	/* Length */
-				EZTIMEOUT);	/* Timeout */
+	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
+			      USBDUXFASTSUB_FIRMWARE,
+			      VENDOR_DIR_OUT,	  /* bmRequestType */
+			      USBDUXFASTSUB_CPUCS,    /* Value */
+			      0x0000,	/* Index */
+			      /* address of the transfer buffer */
+			      local_transfer_buffer,
+			      1,      /* Length */
+			      EZTIMEOUT);    /* Timeout */
 	if (ret < 0) {
 		printk("comedi_: usbduxfast_: control msg failed (start)\n");
 		return ret;
@@ -477,7 +480,8 @@ static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs)
 	/* 7f92 to one */
 	local_transfer_buffer[0] = 1;
 	/* bRequest, "Firmware" */
-	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE,
+	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
+			      USBDUXFASTSUB_FIRMWARE,
 			      VENDOR_DIR_OUT,	/* bmRequestType */
 			      USBDUXFASTSUB_CPUCS,	/* Value */
 			      0x0000,	/* Index */
@@ -504,14 +508,15 @@ static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs,
 	       startAddr, local_transfer_buffer[0]);
 #endif
 	/* brequest, firmware */
-	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE,
-				VENDOR_DIR_OUT,	/* bmRequestType */
-				startAddr,	/* value */
-				0x0000,	/* index */
-				/* our local safe buffer */
-				local_transfer_buffer,
-				len,	/* length */
-				EZTIMEOUT);	/* timeout */
+	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
+			      USBDUXFASTSUB_FIRMWARE,
+			      VENDOR_DIR_OUT,	/* bmRequestType */
+			      startAddr,	/* value */
+			      0x0000,	 /* index */
+			      /* our local safe buffer */
+			      local_transfer_buffer,
+			      len,	/* length */
+			      EZTIMEOUT);      /* timeout */
 
 #ifdef CONFIG_COMEDI_DEBUG
 	printk(KERN_DEBUG "comedi_: usbduxfast: result=%d\n", ret);
@@ -1440,7 +1445,7 @@ static void usbduxfast_firmware_request_complete_handler(const struct firmware
 							 *fw, void *context)
 {
 	struct usbduxfastsub_s *usbduxfastsub_tmp = context;
-	struct usb_device *usbdev = usbduxfastsub_tmp->usbdev;
+	struct usb_interface *uinterf = usbduxfastsub_tmp->interface;
 	int ret;
 
 	if (fw == NULL)
@@ -1453,12 +1458,12 @@ static void usbduxfast_firmware_request_complete_handler(const struct firmware
 	ret = firmwareUpload(usbduxfastsub_tmp, fw->data, fw->size);
 
 	if (ret) {
-		dev_err(&usbdev->dev,
+		dev_err(&uinterf->dev,
 			"Could not upload firmware (err=%d)\n", ret);
 		goto out;
 	}
 
-	comedi_usb_auto_config(usbdev, BOARDNAME);
+	comedi_usb_auto_config(uinterf, &driver_usbduxfast);
  out:
 	release_firmware(fw);
 }
@@ -1606,7 +1611,7 @@ static void usbduxfastsub_disconnect(struct usb_interface *intf)
 		return;
 	}
 
-	comedi_usb_auto_unconfig(udev);
+	comedi_usb_auto_unconfig(intf);
 
 	down(&start_stop_sem);
 	down(&udfs->sem);
@@ -1721,43 +1726,19 @@ static int usbduxfast_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int usbduxfast_detach(struct comedi_device *dev)
+static void usbduxfast_detach(struct comedi_device *dev)
 {
-	struct usbduxfastsub_s *udfs;
-
-	if (!dev) {
-		printk(KERN_ERR "comedi?: usbduxfast: detach without dev "
-		       "variable...\n");
-		return -EFAULT;
-	}
-#ifdef CONFIG_COMEDI_DEBUG
-	printk(KERN_DEBUG "comedi%d: usbduxfast: detach usb device\n",
-	       dev->minor);
-#endif
-
-	udfs = dev->private;
-	if (!udfs) {
-		printk(KERN_ERR "comedi?: usbduxfast: detach without ptr to "
-		       "usbduxfastsub[]\n");
-		return -EFAULT;
+	struct usbduxfastsub_s *usb = dev->private;
+
+	if (usb) {
+		down(&usb->sem);
+		down(&start_stop_sem);
+		dev->private = NULL;
+		usb->attached = 0;
+		usb->comedidev = NULL;
+		up(&start_stop_sem);
+		up(&usb->sem);
 	}
-
-	down(&udfs->sem);
-	down(&start_stop_sem);
-	/*
-	 * Don't allow detach to free the private structure
-	 * It's one entry of of usbduxfastsub[]
-	 */
-	dev->private = NULL;
-	udfs->attached = 0;
-	udfs->comedidev = NULL;
-#ifdef CONFIG_COMEDI_DEBUG
-	printk(KERN_DEBUG "comedi%d: usbduxfast: detach: successfully "
-	       "removed\n", dev->minor);
-#endif
-	up(&start_stop_sem);
-	up(&udfs->sem);
-	return 0;
 }
 
 /*
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index 63c9b6dbc317..465afbdf4069 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -267,6 +267,8 @@ static struct usbduxsub usbduxsub[NUMUSBDUX];
 
 static DEFINE_SEMAPHORE(start_stop_sem);
 
+static struct comedi_driver driver_usbduxsigma;	/* see below for initializer */
+
 /*
  * Stops the data acquision
  * It should be safe to call this function from any context
@@ -2312,11 +2314,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
 						     void *context)
 {
 	struct usbduxsub *usbduxsub_tmp = context;
-	struct usb_device *usbdev = usbduxsub_tmp->usbdev;
+	struct usb_interface *uinterf = usbduxsub_tmp->interface;
 	int ret;
 
 	if (fw == NULL) {
-		dev_err(&usbdev->dev,
+		dev_err(&uinterf->dev,
 			"Firmware complete handler without firmware!\n");
 		return;
 	}
@@ -2328,11 +2330,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw,
 	ret = firmwareUpload(usbduxsub_tmp, fw->data, fw->size);
 
 	if (ret) {
-		dev_err(&usbdev->dev,
+		dev_err(&uinterf->dev,
 			"Could not upload firmware (err=%d)\n", ret);
 		goto out;
 	}
-	comedi_usb_auto_config(usbdev, BOARDNAME);
+	comedi_usb_auto_config(uinterf, &driver_usbduxsigma);
 out:
 	release_firmware(fw);
 }
@@ -2623,7 +2625,7 @@ static void usbduxsigma_disconnect(struct usb_interface *intf)
 	if (usbduxsub_tmp->ao_cmd_running)
 		/* we are still running a command */
 		usbdux_ao_stop(usbduxsub_tmp, 1);
-	comedi_usb_auto_unconfig(udev);
+	comedi_usb_auto_unconfig(intf);
 	down(&start_stop_sem);
 	down(&usbduxsub_tmp->sem);
 	tidy_up(usbduxsub_tmp);
@@ -2799,37 +2801,17 @@ static int usbduxsigma_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static int usbduxsigma_detach(struct comedi_device *dev)
+static void usbduxsigma_detach(struct comedi_device *dev)
 {
-	struct usbduxsub *usbduxsub_tmp;
+	struct usbduxsub *usb = dev->private;
 
-	if (!dev) {
-		printk(KERN_ERR
-		       "comedi? usbduxsigma detach: dev=NULL\n");
-		return -EFAULT;
+	if (usb) {
+		down(&usb->sem);
+		dev->private = NULL;
+		usb->attached = 0;
+		usb->comedidev = NULL;
+		up(&usb->sem);
 	}
-
-	usbduxsub_tmp = dev->private;
-	if (!usbduxsub_tmp) {
-		printk(KERN_ERR
-		       "comedi?: usbduxsigma detach: private=NULL\n");
-		return -EFAULT;
-	}
-
-	dev_dbg(&usbduxsub_tmp->interface->dev,
-		"comedi%d: detach usb device\n",
-		dev->minor);
-
-	down(&usbduxsub_tmp->sem);
-	/* Don't allow detach to free the private structure */
-	/* It's one entry of of usbduxsub[] */
-	dev->private = NULL;
-	usbduxsub_tmp->attached = 0;
-	usbduxsub_tmp->comedidev = NULL;
-	dev_info(&usbduxsub_tmp->interface->dev,
-		"comedi%d: successfully detached.\n", dev->minor);
-	up(&usbduxsub_tmp->sem);
-	return 0;
 }
 
 /* main driver struct */
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index 3d13ca6e1670..baee8d767636 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -151,27 +151,12 @@ MODULE_DEVICE_TABLE(usb, vmk80xx_id_table);
 #define URB_RCV_FLAG            (1 << 0)
 #define URB_SND_FLAG            (1 << 1)
 
-#define CONFIG_VMK80XX_DEBUG
-#undef CONFIG_VMK80XX_DEBUG
-
-#ifdef CONFIG_VMK80XX_DEBUG
-static int dbgvm = 1;
-#else
-static int dbgvm;
-#endif
-
 #ifdef CONFIG_COMEDI_DEBUG
 static int dbgcm = 1;
 #else
 static int dbgcm;
 #endif
 
-#define dbgvm(fmt, arg...)                     \
-do {                                           \
-	if (dbgvm)                             \
-		printk(KERN_DEBUG fmt, ##arg); \
-} while (0)
-
 #define dbgcm(fmt, arg...)                     \
 do {                                           \
 	if (dbgcm)                             \
@@ -247,13 +232,13 @@ static struct vmk80xx_usb vmb[VMK80XX_MAX_BOARDS];
 
 static DEFINE_MUTEX(glb_mutex);
 
+static struct comedi_driver driver_vmk80xx;	/* see below for initializer */
+
 static void vmk80xx_tx_callback(struct urb *urb)
 {
 	struct vmk80xx_usb *dev = urb->context;
 	int stat = urb->status;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	if (stat && !(stat == -ENOENT
 		      || stat == -ECONNRESET || stat == -ESHUTDOWN))
 		dbgcm("comedi#: vmk80xx: %s - nonzero urb status (%d)\n",
@@ -272,8 +257,6 @@ static void vmk80xx_rx_callback(struct urb *urb)
 	struct vmk80xx_usb *dev = urb->context;
 	int stat = urb->status;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	switch (stat) {
 	case 0:
 		break;
@@ -295,7 +278,9 @@ resubmit:
 		if (!usb_submit_urb(urb, GFP_KERNEL))
 			goto exit;
 
-		err("comedi#: vmk80xx: %s - submit urb failed\n", __func__);
+		dev_err(&urb->dev->dev,
+			"comedi#: vmk80xx: %s - submit urb failed\n",
+			__func__);
 
 		usb_unanchor_urb(urb);
 	}
@@ -312,8 +297,6 @@ static int vmk80xx_check_data_link(struct vmk80xx_usb *dev)
 	unsigned char tx[1];
 	unsigned char rx[2];
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	tx_pipe = usb_sndbulkpipe(dev->udev, 0x01);
 	rx_pipe = usb_rcvbulkpipe(dev->udev, 0x81);
 
@@ -338,8 +321,6 @@ static void vmk80xx_read_eeprom(struct vmk80xx_usb *dev, int flag)
 	unsigned char rx[64];
 	int cnt;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	tx_pipe = usb_sndbulkpipe(dev->udev, 0x01);
 	rx_pipe = usb_rcvbulkpipe(dev->udev, 0x81);
 
@@ -367,8 +348,6 @@ static int vmk80xx_reset_device(struct vmk80xx_usb *dev)
 	int ival;
 	size_t size;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!urb)
 		return -ENOMEM;
@@ -406,8 +385,6 @@ static void vmk80xx_build_int_urb(struct urb *urb, int flag)
 	void (*callback) (struct urb *);
 	int ival;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	if (flag & URB_RCV_FLAG) {
 		rx_addr = dev->ep_rx->bEndpointAddress;
 		pipe = usb_rcvintpipe(dev->udev, rx_addr);
@@ -435,8 +412,6 @@ static void vmk80xx_do_bulk_msg(struct vmk80xx_usb *dev)
 	unsigned int rx_pipe;
 	size_t size;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	set_bit(TRANS_IN_BUSY, &dev->flags);
 	set_bit(TRANS_OUT_BUSY, &dev->flags);
 
@@ -464,8 +439,6 @@ static int vmk80xx_read_packet(struct vmk80xx_usb *dev)
 	struct urb *urb;
 	int retval;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	if (!dev->intf)
 		return -ENODEV;
 
@@ -512,8 +485,6 @@ static int vmk80xx_write_packet(struct vmk80xx_usb *dev, int cmd)
 	struct urb *urb;
 	int retval;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	if (!dev->intf)
 		return -ENODEV;
 
@@ -588,8 +559,6 @@ static int vmk80xx_ai_rinsn(struct comedi_device *cdev,
 	int reg[2];
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_IN);
 	if (n)
 		return n;
@@ -641,8 +610,6 @@ static int vmk80xx_ao_winsn(struct comedi_device *cdev,
 	int reg;
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_OUT);
 	if (n)
 		return n;
@@ -686,8 +653,6 @@ static int vmk80xx_ao_rinsn(struct comedi_device *cdev,
 	int reg;
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_IN);
 	if (n)
 		return n;
@@ -720,8 +685,6 @@ static int vmk80xx_di_bits(struct comedi_device *cdev,
 	int reg;
 	int retval;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	retval = rudimentary_check(dev, DIR_IN);
 	if (retval)
 		return retval;
@@ -766,8 +729,6 @@ static int vmk80xx_di_rinsn(struct comedi_device *cdev,
 	int inp;
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_IN);
 	if (n)
 		return n;
@@ -813,8 +774,6 @@ static int vmk80xx_do_winsn(struct comedi_device *cdev,
 	int cmd;
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_OUT);
 	if (n)
 		return n;
@@ -861,8 +820,6 @@ static int vmk80xx_do_rinsn(struct comedi_device *cdev,
 	int reg;
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_IN);
 	if (n)
 		return n;
@@ -895,8 +852,6 @@ static int vmk80xx_do_bits(struct comedi_device *cdev,
 	int dir, reg, cmd;
 	int retval;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	dir = 0;
 
 	if (data[0])
@@ -962,8 +917,6 @@ static int vmk80xx_cnt_rinsn(struct comedi_device *cdev,
 	int reg[2];
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_IN);
 	if (n)
 		return n;
@@ -1012,18 +965,16 @@ static int vmk80xx_cnt_cinsn(struct comedi_device *cdev,
 	int reg;
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_OUT);
 	if (n)
 		return n;
 
-	down(&dev->limit_sem);
-
 	insn_cmd = data[0];
 	if (insn_cmd != INSN_CONFIG_RESET && insn_cmd != GPCT_RESET)
 		return -EINVAL;
 
+	down(&dev->limit_sem);
+
 	chan = CR_CHAN(insn->chanspec);
 
 	if (dev->board.model == VMK8055_MODEL) {
@@ -1060,8 +1011,6 @@ static int vmk80xx_cnt_winsn(struct comedi_device *cdev,
 	int cmd;
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_OUT);
 	if (n)
 		return n;
@@ -1106,8 +1055,6 @@ static int vmk80xx_pwm_rinsn(struct comedi_device *cdev,
 	int reg[2];
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_IN);
 	if (n)
 		return n;
@@ -1141,8 +1088,6 @@ static int vmk80xx_pwm_winsn(struct comedi_device *cdev,
 	int cmd;
 	int n;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	n = rudimentary_check(dev, DIR_OUT);
 	if (n)
 		return n;
@@ -1191,8 +1136,6 @@ static int vmk80xx_attach(struct comedi_device *cdev,
 	struct comedi_subdevice *s;
 	int minor;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	mutex_lock(&glb_mutex);
 
 	for (i = 0; i < VMK80XX_MAX_BOARDS; i++)
@@ -1307,34 +1250,16 @@ static int vmk80xx_attach(struct comedi_device *cdev,
 	return 0;
 }
 
-static int vmk80xx_detach(struct comedi_device *cdev)
+static void vmk80xx_detach(struct comedi_device *dev)
 {
-	struct vmk80xx_usb *dev;
-	int minor;
-
-	dbgvm("vmk80xx: %s\n", __func__);
-
-	if (!cdev)
-		return -EFAULT;
-
-	dev = cdev->private;
-	if (!dev)
-		return -EFAULT;
+	struct vmk80xx_usb *usb = dev->private;
 
-	down(&dev->limit_sem);
-
-	cdev->private = NULL;
-	dev->attached = 0;
-
-	minor = cdev->minor;
-
-	printk(KERN_INFO
-	       "comedi%d: vmk80xx: board #%d [%s] detached from comedi\n",
-	       minor, dev->count, dev->board.name);
-
-	up(&dev->limit_sem);
-
-	return 0;
+	if (usb) {
+		down(&usb->limit_sem);
+		dev->private = NULL;
+		usb->attached = 0;
+		up(&usb->limit_sem);
+	}
 }
 
 static int vmk80xx_probe(struct usb_interface *intf,
@@ -1346,8 +1271,6 @@ static int vmk80xx_probe(struct usb_interface *intf,
 	struct usb_endpoint_descriptor *ep_desc;
 	size_t size;
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	mutex_lock(&glb_mutex);
 
 	for (i = 0; i < VMK80XX_MAX_BOARDS; i++)
@@ -1482,7 +1405,7 @@ static int vmk80xx_probe(struct usb_interface *intf,
 
 	mutex_unlock(&glb_mutex);
 
-	comedi_usb_auto_config(dev->udev, BOARDNAME);
+	comedi_usb_auto_config(intf, &driver_vmk80xx);
 
 	return 0;
 error:
@@ -1495,12 +1418,10 @@ static void vmk80xx_disconnect(struct usb_interface *intf)
 {
 	struct vmk80xx_usb *dev = usb_get_intfdata(intf);
 
-	dbgvm("vmk80xx: %s\n", __func__);
-
 	if (!dev)
 		return;
 
-	comedi_usb_auto_unconfig(dev->udev);
+	comedi_usb_auto_unconfig(intf);
 
 	mutex_lock(&glb_mutex);
 	down(&dev->limit_sem);
diff --git a/drivers/staging/comedi/internal.h b/drivers/staging/comedi/internal.h
index 434ce3433368..7ed20a04eef5 100644
--- a/drivers/staging/comedi/internal.h
+++ b/drivers/staging/comedi/internal.h
@@ -1,5 +1,5 @@
 /*
- * various internal comedi functions
+ * various internal comedi stuff
  */
 int do_rangeinfo_ioctl(struct comedi_device *dev,
 		       struct comedi_rangeinfo __user *arg);
@@ -7,6 +7,10 @@ int insn_inval(struct comedi_device *dev, struct comedi_subdevice *s,
 	       struct comedi_insn *insn, unsigned int *data);
 int comedi_alloc_board_minor(struct device *hardware_device);
 void comedi_free_board_minor(unsigned minor);
+int comedi_find_board_minor(struct device *hardware_device);
 void comedi_reset_async_buf(struct comedi_async *async);
 int comedi_buf_alloc(struct comedi_device *dev, struct comedi_subdevice *s,
 		     unsigned long new_size);
+
+extern unsigned int comedi_default_buf_size_kb;
+extern unsigned int comedi_default_buf_maxsize_kb;
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 886f5650444e..5b11c5e3622e 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -1710,7 +1710,8 @@ static int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg)
 		return value;
 }
 
-static int et131x_mdio_write(struct mii_bus *bus, int phy_addr, int reg, u16 value)
+static int et131x_mdio_write(struct mii_bus *bus, int phy_addr,
+			     int reg, u16 value)
 {
 	struct net_device *netdev = bus->priv;
 	struct et131x_adapter *adapter = netdev_priv(netdev);
@@ -4013,7 +4014,7 @@ static int et131x_pci_init(struct et131x_adapter *adapter,
 		dev_err(&pdev->dev, "Missing PCIe capabilities\n");
 		goto err_out;
 	}
-		
+
 	/* Let's set up the PORT LOGIC Register.  First we need to know what
 	 * the max_payload_size is
 	 */
@@ -4060,7 +4061,7 @@ static int et131x_pci_init(struct et131x_adapter *adapter,
 		goto err_out;
 	}
 
-	ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | ( 0x04 << 12);
+	ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | (0x04 << 12);
 
 	if (pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL, ctl)) {
 		dev_err(&pdev->dev,
@@ -4824,7 +4825,8 @@ static int et131x_open(struct net_device *netdev)
 	adapter->error_timer.data = (unsigned long)adapter;
 	add_timer(&adapter->error_timer);
 
-	result = request_irq(irq, et131x_isr, IRQF_SHARED, netdev->name, netdev);
+	result = request_irq(irq, et131x_isr,
+			     IRQF_SHARED, netdev->name, netdev);
 	if (result) {
 		dev_err(&pdev->dev, "could not register IRQ %d\n", irq);
 		return result;
diff --git a/drivers/staging/frontier/alphatrack.c b/drivers/staging/frontier/alphatrack.c
index 3bf0f40e97fd..acbb2cc510f9 100644
--- a/drivers/staging/frontier/alphatrack.c
+++ b/drivers/staging/frontier/alphatrack.c
@@ -333,8 +333,8 @@ static int usb_alphatrack_open(struct inode *inode, struct file *file)
 	interface = usb_find_interface(&usb_alphatrack_driver, subminor);
 
 	if (!interface) {
-		err("%s - error, can't find device for minor %d\n",
-		    __func__, subminor);
+		printk(KERN_ERR "%s - error, can't find device for minor %d\n",
+		       __func__, subminor);
 		retval = -ENODEV;
 		goto unlock_disconnect_exit;
 	}
@@ -494,7 +494,8 @@ static ssize_t usb_alphatrack_read(struct file *file, char __user *buffer,
 	/* verify that the device wasn't unplugged */
 	if (dev->intf == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d\n", retval);
+		printk(KERN_ERR "%s: No device or device unplugged %d\n",
+		       __func__, retval);
 		goto unlock_exit;
 	}
 
@@ -564,7 +565,8 @@ static ssize_t usb_alphatrack_write(struct file *file,
 	/* verify that the device wasn't unplugged */
 	if (dev->intf == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d\n", retval);
+		printk(KERN_ERR "%s: No device or device unplugged %d\n",
+		       __func__, retval);
 		goto unlock_exit;
 	}
 
@@ -599,7 +601,7 @@ static ssize_t usb_alphatrack_write(struct file *file,
 	}
 
 	if (dev->interrupt_out_endpoint == NULL) {
-		err("Endpoint should not be be null!\n");
+		dev_err(&dev->intf->dev, "Endpoint should not be be null!\n");
 		goto unlock_exit;
 	}
 
@@ -619,7 +621,8 @@ static ssize_t usb_alphatrack_write(struct file *file,
 	retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
 	if (retval) {
 		dev->interrupt_out_busy = 0;
-		err("Couldn't submit interrupt_out_urb %d\n", retval);
+		dev_err(&dev->intf->dev,
+			"Couldn't submit interrupt_out_urb %d\n", retval);
 		atomic_dec(&dev->writes_pending);
 		goto unlock_exit;
 	}
diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c
index 29e99bbcae48..376706f1c712 100644
--- a/drivers/staging/frontier/tranzport.c
+++ b/drivers/staging/frontier/tranzport.c
@@ -353,7 +353,7 @@ static int usb_tranzport_open(struct inode *inode, struct file *file)
 	interface = usb_find_interface(&usb_tranzport_driver, subminor);
 
 	if (!interface) {
-		err("%s - error, can't find device for minor %d\n",
+		printk(KERN_ERR "%s - error, can't find device for minor %d\n",
 			__func__, subminor);
 		retval = -ENODEV;
 		goto unlock_disconnect_exit;
@@ -517,9 +517,11 @@ static ssize_t usb_tranzport_read(struct file *file, char __user *buffer,
 		goto exit;
 	}
 
-	/* verify that the device wasn't unplugged */ if (dev->intf == NULL) {
+	/* verify that the device wasn't unplugged */
+	if (dev->intf == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d\n", retval);
+		printk(KERN_ERR "%s: No device or device unplugged %d\n",
+			__func__, retval);
 		goto unlock_exit;
 	}
 
@@ -691,7 +693,8 @@ static ssize_t usb_tranzport_write(struct file *file,
 	/* verify that the device wasn't unplugged */
 	if (dev->intf == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d\n", retval);
+		printk(KERN_ERR "%s: No device or device unplugged %d\n",
+			__func__, retval);
 		goto unlock_exit;
 	}
 
@@ -726,7 +729,7 @@ static ssize_t usb_tranzport_write(struct file *file,
 	}
 
 	if (dev->interrupt_out_endpoint == NULL) {
-		err("Endpoint should not be be null!\n");
+		dev_err(&dev->intf->dev, "Endpoint should not be be null!\n");
 		goto unlock_exit;
 	}
 
@@ -746,7 +749,8 @@ static ssize_t usb_tranzport_write(struct file *file,
 	retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
 	if (retval) {
 		dev->interrupt_out_busy = 0;
-		err("Couldn't submit interrupt_out_urb %d\n", retval);
+		dev_err(&dev->intf->dev,
+			"Couldn't submit interrupt_out_urb %d\n", retval);
 		goto unlock_exit;
 	}
 	retval = bytes_to_write;
diff --git a/drivers/staging/gdm72xx/Kconfig b/drivers/staging/gdm72xx/Kconfig
new file mode 100644
index 000000000000..3c18efe31365
--- /dev/null
+++ b/drivers/staging/gdm72xx/Kconfig
@@ -0,0 +1,46 @@
+#
+# GCT GDM72xx WiMAX driver configuration
+#
+
+menuconfig WIMAX_GDM72XX
+	tristate "GCT GDM72xx WiMAX support"
+	depends on NET
+	help
+	  Support for the GCT GDM72xx WiMAX chip
+
+if WIMAX_GDM72XX
+
+config WIMAX_GDM72XX_QOS
+	bool "Enable QoS support"
+	default n
+
+config WIMAX_GDM72XX_K_MODE
+	bool "Enable K mode"
+	default n
+
+config WIMAX_GDM72XX_WIMAX2
+	bool "Enable WIMAX2 support"
+	default n
+
+choice
+	prompt "Select interface"
+
+config WIMAX_GDM72XX_USB
+	bool "USB interface"
+	depends on USB
+
+config WIMAX_GDM72XX_SDIO
+	bool "SDIO interface"
+	depends on MMC
+
+endchoice
+
+if WIMAX_GDM72XX_USB
+
+config WIMAX_GDM72XX_USB_PM
+	bool "Enable power managerment support"
+	depends on USB_SUSPEND
+
+endif # WIMAX_GDM72XX_USB
+
+endif # WIMAX_GDM72XX
diff --git a/drivers/staging/gdm72xx/Makefile b/drivers/staging/gdm72xx/Makefile
new file mode 100644
index 000000000000..35da7b90b19b
--- /dev/null
+++ b/drivers/staging/gdm72xx/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_WIMAX_GDM72XX) := gdmwm.o
+
+gdmwm-y += gdm_wimax.o netlink_k.o
+gdmwm-$(CONFIG_WIMAX_GDM72XX_QOS) += gdm_qos.o
+gdmwm-$(CONFIG_WIMAX_GDM72XX_SDIO) += gdm_sdio.o sdio_boot.o
+gdmwm-$(CONFIG_WIMAX_GDM72XX_USB) += gdm_usb.o usb_boot.o
diff --git a/drivers/staging/gdm72xx/TODO b/drivers/staging/gdm72xx/TODO
new file mode 100644
index 000000000000..30ac01ab972f
--- /dev/null
+++ b/drivers/staging/gdm72xx/TODO
@@ -0,0 +1,5 @@
+TODO:
+- Replace kernel_thread with kthread in gdm_usb.c
+- Replace hard-coded firmware paths with request_firmware in
+  sdio_boot.c and usb_boot.c
+- Clean up coding style to meet kernel standard.
diff --git a/drivers/staging/gdm72xx/gdm_qos.c b/drivers/staging/gdm72xx/gdm_qos.c
new file mode 100644
index 000000000000..0217680ec545
--- /dev/null
+++ b/drivers/staging/gdm72xx/gdm_qos.c
@@ -0,0 +1,460 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/version.h>
+#include <linux/etherdevice.h>
+#include <asm/byteorder.h>
+
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/if_ether.h>
+
+#include "gdm_wimax.h"
+#include "hci.h"
+#include "gdm_qos.h"
+
+#define B2H(x)		__be16_to_cpu(x)
+
+#undef dprintk
+#define dprintk(fmt, args ...) printk(KERN_DEBUG "[QoS] " fmt, ## args)
+#undef wprintk
+#define wprintk(fmt, args ...) \
+	printk(KERN_WARNING "[QoS WARNING] " fmt, ## args)
+#undef eprintk
+#define eprintk(fmt, args ...) printk(KERN_ERR "[QoS ERROR] " fmt, ## args)
+
+
+#define MAX_FREE_LIST_CNT		32
+static struct {
+	struct list_head head;
+	int cnt;
+	spinlock_t lock;
+} qos_free_list;
+
+static void init_qos_entry_list(void)
+{
+	qos_free_list.cnt = 0;
+	INIT_LIST_HEAD(&qos_free_list.head);
+	spin_lock_init(&qos_free_list.lock);
+}
+
+static void *alloc_qos_entry(void)
+{
+	struct qos_entry_s *entry;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qos_free_list.lock, flags);
+	if (qos_free_list.cnt) {
+		entry = list_entry(qos_free_list.head.prev, struct qos_entry_s,
+					list);
+		list_del(&entry->list);
+		qos_free_list.cnt--;
+		spin_unlock_irqrestore(&qos_free_list.lock, flags);
+		return entry;
+	}
+	spin_unlock_irqrestore(&qos_free_list.lock, flags);
+
+	entry = kmalloc(sizeof(struct qos_entry_s), GFP_ATOMIC);
+	return entry;
+}
+
+static void free_qos_entry(void *entry)
+{
+	struct qos_entry_s *qentry = (struct qos_entry_s *) entry;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qos_free_list.lock, flags);
+	if (qos_free_list.cnt < MAX_FREE_LIST_CNT) {
+		list_add(&qentry->list, &qos_free_list.head);
+		qos_free_list.cnt++;
+		spin_unlock_irqrestore(&qos_free_list.lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&qos_free_list.lock, flags);
+
+	kfree(entry);
+}
+
+static void free_qos_entry_list(struct list_head *free_list)
+{
+	struct qos_entry_s *entry, *n;
+	int total_free = 0;
+
+	list_for_each_entry_safe(entry, n, free_list, list) {
+		list_del(&entry->list);
+		kfree(entry);
+		total_free++;
+	}
+
+	dprintk("%s: total_free_cnt=%d\n", __func__, total_free);
+}
+
+void gdm_qos_init(void *nic_ptr)
+{
+	struct nic *nic = nic_ptr;
+	struct qos_cb_s *qcb = &nic->qos;
+	int i;
+
+	for (i = 0 ; i < QOS_MAX; i++) {
+		INIT_LIST_HEAD(&qcb->qos_list[i]);
+		qcb->csr[i].QoSBufCount = 0;
+		qcb->csr[i].Enabled = 0;
+	}
+
+	qcb->qos_list_cnt = 0;
+	qcb->qos_null_idx = QOS_MAX-1;
+	qcb->qos_limit_size = 255;
+
+	spin_lock_init(&qcb->qos_lock);
+
+	init_qos_entry_list();
+}
+
+void gdm_qos_release_list(void *nic_ptr)
+{
+	struct nic *nic = nic_ptr;
+	struct qos_cb_s *qcb = &nic->qos;
+	unsigned long flags;
+	struct qos_entry_s *entry, *n;
+	struct list_head free_list;
+	int i;
+
+	INIT_LIST_HEAD(&free_list);
+
+	spin_lock_irqsave(&qcb->qos_lock, flags);
+
+	for (i = 0; i < QOS_MAX; i++) {
+		qcb->csr[i].QoSBufCount = 0;
+		qcb->csr[i].Enabled = 0;
+	}
+
+	qcb->qos_list_cnt = 0;
+	qcb->qos_null_idx = QOS_MAX-1;
+
+	for (i = 0; i < QOS_MAX; i++) {
+		list_for_each_entry_safe(entry, n, &qcb->qos_list[i], list) {
+			list_move_tail(&entry->list, &free_list);
+		}
+	}
+	spin_unlock_irqrestore(&qcb->qos_lock, flags);
+	free_qos_entry_list(&free_list);
+}
+
+static u32 chk_ipv4_rule(struct gdm_wimax_csr_s *csr, u8 *Stream, u8 *port)
+{
+	int i;
+
+	if (csr->ClassifierRuleEnable&IPTYPEOFSERVICE) {
+		if (((Stream[1] & csr->IPToSMask) < csr->IPToSLow) ||
+		((Stream[1] & csr->IPToSMask) > csr->IPToSHigh))
+			return 1;
+	}
+
+	if (csr->ClassifierRuleEnable&PROTOCOL) {
+		if (Stream[9] != csr->Protocol)
+			return 1;
+	}
+
+	if (csr->ClassifierRuleEnable&IPMASKEDSRCADDRESS) {
+		for (i = 0; i < 4; i++) {
+			if ((Stream[12 + i] & csr->IPSrcAddrMask[i]) !=
+			(csr->IPSrcAddr[i] & csr->IPSrcAddrMask[i]))
+				return 1;
+		}
+	}
+
+	if (csr->ClassifierRuleEnable&IPMASKEDDSTADDRESS) {
+		for (i = 0; i < 4; i++) {
+			if ((Stream[16 + i] & csr->IPDstAddrMask[i]) !=
+			(csr->IPDstAddr[i] & csr->IPDstAddrMask[i]))
+				return 1;
+		}
+	}
+
+	if (csr->ClassifierRuleEnable&PROTOCOLSRCPORTRANGE) {
+		i = ((port[0]<<8)&0xff00)+port[1];
+		if ((i < csr->SrcPortLow) || (i > csr->SrcPortHigh))
+			return 1;
+	}
+
+	if (csr->ClassifierRuleEnable&PROTOCOLDSTPORTRANGE) {
+		i = ((port[2]<<8)&0xff00)+port[3];
+		if ((i < csr->DstPortLow) || (i > csr->DstPortHigh))
+			return 1;
+	}
+
+	return 0;
+}
+
+static u32 get_qos_index(struct nic *nic, u8* iph, u8* tcpudph)
+{
+	u32	IP_Ver, Header_Len, i;
+	struct qos_cb_s *qcb = &nic->qos;
+
+	if (iph == NULL || tcpudph == NULL)
+		return -1;
+
+	IP_Ver = (iph[0]>>4)&0xf;
+	Header_Len = iph[0]&0xf;
+
+	if (IP_Ver == 4) {
+		for (i = 0; i < QOS_MAX; i++) {
+			if (qcb->csr[i].Enabled) {
+				if (qcb->csr[i].ClassifierRuleEnable) {
+					if (chk_ipv4_rule(&qcb->csr[i], iph,
+					tcpudph) == 0)
+						return i;
+				}
+			}
+		}
+	}
+
+	return -1;
+}
+
+static u32 extract_qos_list(struct nic *nic, struct list_head *head)
+{
+	struct qos_cb_s *qcb = &nic->qos;
+	struct qos_entry_s *entry;
+	int i;
+
+	INIT_LIST_HEAD(head);
+
+	for (i = 0; i < QOS_MAX; i++) {
+		if (qcb->csr[i].Enabled) {
+			if (qcb->csr[i].QoSBufCount < qcb->qos_limit_size) {
+				if (!list_empty(&qcb->qos_list[i])) {
+					entry = list_entry(
+					qcb->qos_list[i].prev,
+					struct qos_entry_s, list);
+					list_move_tail(&entry->list, head);
+					qcb->csr[i].QoSBufCount++;
+
+					if (!list_empty(&qcb->qos_list[i]))
+						wprintk("QoS Index(%d) "
+							"is piled!!\n", i);
+				}
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void send_qos_list(struct nic *nic, struct list_head *head)
+{
+	struct qos_entry_s *entry, *n;
+
+	list_for_each_entry_safe(entry, n, head, list) {
+		list_del(&entry->list);
+		free_qos_entry(entry);
+		gdm_wimax_send_tx(entry->skb, entry->dev);
+	}
+}
+
+int gdm_qos_send_hci_pkt(struct sk_buff *skb, struct net_device *dev)
+{
+	struct nic *nic = netdev_priv(dev);
+	int index;
+	struct qos_cb_s *qcb = &nic->qos;
+	unsigned long flags;
+	struct ethhdr *ethh = (struct ethhdr *) (skb->data + HCI_HEADER_SIZE);
+	struct iphdr *iph = (struct iphdr *) ((char *) ethh + ETH_HLEN);
+	struct tcphdr *tcph;
+	struct qos_entry_s *entry = NULL;
+	struct list_head send_list;
+	int ret = 0;
+
+	tcph = (struct tcphdr *) iph + iph->ihl*4;
+
+	if (B2H(ethh->h_proto) == ETH_P_IP) {
+		if (qcb->qos_list_cnt && !qos_free_list.cnt) {
+			entry = alloc_qos_entry();
+			entry->skb = skb;
+			entry->dev = dev;
+			dprintk("qcb->qos_list_cnt=%d\n", qcb->qos_list_cnt);
+		}
+
+		spin_lock_irqsave(&qcb->qos_lock, flags);
+		if (qcb->qos_list_cnt) {
+			index = get_qos_index(nic, (u8 *)iph, (u8 *) tcph);
+			if (index == -1)
+				index = qcb->qos_null_idx;
+
+			if (!entry) {
+				entry = alloc_qos_entry();
+				entry->skb = skb;
+				entry->dev = dev;
+			}
+
+			list_add_tail(&entry->list, &qcb->qos_list[index]);
+			extract_qos_list(nic, &send_list);
+			spin_unlock_irqrestore(&qcb->qos_lock, flags);
+			send_qos_list(nic, &send_list);
+			goto out;
+		}
+		spin_unlock_irqrestore(&qcb->qos_lock, flags);
+		if (entry)
+			free_qos_entry(entry);
+	}
+
+	ret = gdm_wimax_send_tx(skb, dev);
+out:
+	return ret;
+}
+
+static u32 get_csr(struct qos_cb_s *qcb, u32 SFID, int mode)
+{
+	int i;
+
+	for (i = 0; i < qcb->qos_list_cnt; i++) {
+		if (qcb->csr[i].SFID == SFID)
+			return i;
+	}
+
+	if (mode) {
+		for (i = 0; i < QOS_MAX; i++) {
+			if (qcb->csr[i].Enabled == 0) {
+				qcb->csr[i].Enabled = 1;
+				qcb->qos_list_cnt++;
+				return i;
+			}
+		}
+	}
+	return -1;
+}
+
+#define QOS_CHANGE_DEL	0xFC
+#define QOS_ADD		0xFD
+#define QOS_REPORT	0xFE
+
+void gdm_recv_qos_hci_packet(void *nic_ptr, u8 *buf, int size)
+{
+	struct nic *nic = nic_ptr;
+	u32 i, SFID, index, pos;
+	u8 subCmdEvt;
+	u8 len;
+	struct qos_cb_s *qcb = &nic->qos;
+	struct qos_entry_s *entry, *n;
+	struct list_head send_list;
+	struct list_head free_list;
+	unsigned long flags;
+
+	subCmdEvt = (u8)buf[4];
+
+	if (subCmdEvt == QOS_REPORT) {
+		len = (u8)buf[5];
+
+		spin_lock_irqsave(&qcb->qos_lock, flags);
+		for (i = 0; i < qcb->qos_list_cnt; i++) {
+			SFID = ((buf[(i*5)+6]<<24)&0xff000000);
+			SFID += ((buf[(i*5)+7]<<16)&0xff0000);
+			SFID += ((buf[(i*5)+8]<<8)&0xff00);
+			SFID += (buf[(i*5)+9]);
+			index = get_csr(qcb, SFID, 0);
+			if (index == -1) {
+				spin_unlock_irqrestore(&qcb->qos_lock, flags);
+				eprintk("QoS ERROR: No SF\n");
+				return;
+			}
+			qcb->csr[index].QoSBufCount = buf[(i*5)+10];
+		}
+
+		extract_qos_list(nic, &send_list);
+		spin_unlock_irqrestore(&qcb->qos_lock, flags);
+		send_qos_list(nic, &send_list);
+		return;
+	} else if (subCmdEvt == QOS_ADD) {
+		pos = 5;
+		len = (u8)buf[pos++];
+
+		SFID = ((buf[pos++]<<24)&0xff000000);
+		SFID += ((buf[pos++]<<16)&0xff0000);
+		SFID += ((buf[pos++]<<8)&0xff00);
+		SFID += (buf[pos++]);
+
+		index = get_csr(qcb, SFID, 1);
+		if (index == -1) {
+			eprintk("QoS ERROR: csr Update Error\n");
+			return;
+		}
+
+		dprintk("QOS_ADD SFID = 0x%x, index=%d\n", SFID, index);
+
+		spin_lock_irqsave(&qcb->qos_lock, flags);
+		qcb->csr[index].SFID = SFID;
+		qcb->csr[index].ClassifierRuleEnable = ((buf[pos++]<<8)&0xff00);
+		qcb->csr[index].ClassifierRuleEnable += buf[pos++];
+		if (qcb->csr[index].ClassifierRuleEnable == 0)
+			qcb->qos_null_idx = index;
+		qcb->csr[index].IPToSMask = buf[pos++];
+		qcb->csr[index].IPToSLow = buf[pos++];
+		qcb->csr[index].IPToSHigh = buf[pos++];
+		qcb->csr[index].Protocol = buf[pos++];
+		qcb->csr[index].IPSrcAddrMask[0] = buf[pos++];
+		qcb->csr[index].IPSrcAddrMask[1] = buf[pos++];
+		qcb->csr[index].IPSrcAddrMask[2] = buf[pos++];
+		qcb->csr[index].IPSrcAddrMask[3] = buf[pos++];
+		qcb->csr[index].IPSrcAddr[0] = buf[pos++];
+		qcb->csr[index].IPSrcAddr[1] = buf[pos++];
+		qcb->csr[index].IPSrcAddr[2] = buf[pos++];
+		qcb->csr[index].IPSrcAddr[3] = buf[pos++];
+		qcb->csr[index].IPDstAddrMask[0] = buf[pos++];
+		qcb->csr[index].IPDstAddrMask[1] = buf[pos++];
+		qcb->csr[index].IPDstAddrMask[2] = buf[pos++];
+		qcb->csr[index].IPDstAddrMask[3] = buf[pos++];
+		qcb->csr[index].IPDstAddr[0] = buf[pos++];
+		qcb->csr[index].IPDstAddr[1] = buf[pos++];
+		qcb->csr[index].IPDstAddr[2] = buf[pos++];
+		qcb->csr[index].IPDstAddr[3] = buf[pos++];
+		qcb->csr[index].SrcPortLow = ((buf[pos++]<<8)&0xff00);
+		qcb->csr[index].SrcPortLow += buf[pos++];
+		qcb->csr[index].SrcPortHigh = ((buf[pos++]<<8)&0xff00);
+		qcb->csr[index].SrcPortHigh += buf[pos++];
+		qcb->csr[index].DstPortLow = ((buf[pos++]<<8)&0xff00);
+		qcb->csr[index].DstPortLow += buf[pos++];
+		qcb->csr[index].DstPortHigh = ((buf[pos++]<<8)&0xff00);
+		qcb->csr[index].DstPortHigh += buf[pos++];
+
+		qcb->qos_limit_size = 254/qcb->qos_list_cnt;
+		spin_unlock_irqrestore(&qcb->qos_lock, flags);
+	} else if (subCmdEvt == QOS_CHANGE_DEL) {
+		pos = 5;
+		len = (u8)buf[pos++];
+		SFID = ((buf[pos++]<<24)&0xff000000);
+		SFID += ((buf[pos++]<<16)&0xff0000);
+		SFID += ((buf[pos++]<<8)&0xff00);
+		SFID += (buf[pos++]);
+		index = get_csr(qcb, SFID, 1);
+		if (index == -1) {
+			eprintk("QoS ERROR: Wrong index(%d)\n", index);
+			return;
+		}
+
+		dprintk("QOS_CHANGE_DEL SFID = 0x%x, index=%d\n", SFID, index);
+
+		INIT_LIST_HEAD(&free_list);
+
+		spin_lock_irqsave(&qcb->qos_lock, flags);
+		qcb->csr[index].Enabled = 0;
+		qcb->qos_list_cnt--;
+		qcb->qos_limit_size = 254/qcb->qos_list_cnt;
+
+		list_for_each_entry_safe(entry, n, &qcb->qos_list[index],
+					list) {
+			list_move_tail(&entry->list, &free_list);
+		}
+		spin_unlock_irqrestore(&qcb->qos_lock, flags);
+		free_qos_entry_list(&free_list);
+	}
+}
diff --git a/drivers/staging/gdm72xx/gdm_qos.h b/drivers/staging/gdm72xx/gdm_qos.h
new file mode 100644
index 000000000000..33f2bd4cee32
--- /dev/null
+++ b/drivers/staging/gdm72xx/gdm_qos.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#if !defined(GDM_QOS_H_20090403)
+#define GDM_QOS_H_20090403
+
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <linux/list.h>
+
+#define BOOLEAN	u8
+
+#define QOS_MAX						16
+#define IPTYPEOFSERVICE				0x8000
+#define	PROTOCOL				0x4000
+#define	IPMASKEDSRCADDRESS			0x2000
+#define	IPMASKEDDSTADDRESS			0x1000
+#define	PROTOCOLSRCPORTRANGE		0x800
+#define	PROTOCOLDSTPORTRANGE		0x400
+#define	DSTMACADDR					0x200
+#define	SRCMACADDR					0x100
+#define	ETHERTYPE					0x80
+#define	IEEE802_1DUSERPRIORITY		0x40
+#define	IEEE802_1QVLANID			0x10
+
+struct gdm_wimax_csr_s {
+	/*	union{
+		U16 all;
+		struct _CS_CLASSIFIER_RULE_ENABLE{
+			IPTypeOfService:1,
+			Protocol:1,
+			IPMaskedSrcAddress:1,
+			IPMaskedDstAddress:1,
+			ProtocolSrcPortRange:1,
+			ProtocolDstPortRange:1,
+			DstMacAddr:1,
+			SrcMacAddr:1,
+			Ethertype:1,
+			IEEE802_1DUserPriority:1,
+			IEEE802_1QVLANID:1,
+			Reserved:5;
+		} fields;
+	} */
+	BOOLEAN		Enabled;
+	u32			SFID;
+	u8			QoSBufCount;
+	u16		ClassifierRuleEnable;
+	u8			IPToSLow;
+	u8			IPToSHigh;
+	u8			IPToSMask;
+	u8			Protocol;
+	u8			IPSrcAddr[16];
+	u8			IPSrcAddrMask[16];
+	u8			IPDstAddr[16];
+	u8			IPDstAddrMask[16];
+	u16		SrcPortLow;
+	u16		SrcPortHigh;
+	u16		DstPortLow;
+	u16		DstPortHigh;
+};
+
+struct qos_entry_s {
+	struct list_head list;
+	struct sk_buff *skb;
+	struct net_device *dev;
+
+};
+
+struct qos_cb_s {
+	struct list_head	qos_list[QOS_MAX];
+	u32			qos_list_cnt;
+	u32			qos_null_idx;
+	struct gdm_wimax_csr_s	csr[QOS_MAX];
+	spinlock_t	qos_lock;
+	u32			qos_limit_size;
+};
+
+void gdm_qos_init(void *nic_ptr);
+void gdm_qos_release_list(void *nic_ptr);
+int gdm_qos_send_hci_pkt(struct sk_buff *skb, struct net_device *dev);
+void gdm_recv_qos_hci_packet(void *nic_ptr, u8 *buf, int size);
+
+#endif
diff --git a/drivers/staging/gdm72xx/gdm_sdio.c b/drivers/staging/gdm72xx/gdm_sdio.c
new file mode 100644
index 000000000000..e1a3dd2fc4af
--- /dev/null
+++ b/drivers/staging/gdm72xx/gdm_sdio.c
@@ -0,0 +1,754 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+
+#include "gdm_sdio.h"
+#include "gdm_wimax.h"
+#include "sdio_boot.h"
+#include "hci.h"
+
+#define TYPE_A_HEADER_SIZE	4
+#define TYPE_A_LOOKAHEAD_SIZE	16
+
+#define MAX_NR_RX_BUF	4
+
+#define SDU_TX_BUF_SIZE	2048
+#define TX_BUF_SIZE		2048
+#define TX_CHUNK_SIZE	(2048 - TYPE_A_HEADER_SIZE)
+#define RX_BUF_SIZE		(25*1024)
+
+#define TX_HZ	2000
+#define TX_INTERVAL	(1000000/TX_HZ)
+
+/*#define DEBUG*/
+
+static int init_sdio(struct sdiowm_dev *sdev);
+static void release_sdio(struct sdiowm_dev *sdev);
+
+#ifdef DEBUG
+static void hexdump(char *title, u8 *data, int len)
+{
+	int i;
+
+	printk(KERN_DEBUG "%s: length = %d\n", title, len);
+	for (i = 0; i < len; i++) {
+		printk(KERN_DEBUG "%02x ", data[i]);
+		if ((i & 0xf) == 0xf)
+			printk(KERN_DEBUG "\n");
+	}
+	printk(KERN_DEBUG "\n");
+}
+#endif
+
+static struct sdio_tx *alloc_tx_struct(struct tx_cxt *tx)
+{
+	struct sdio_tx *t = NULL;
+
+	t = kmalloc(sizeof(*t), GFP_ATOMIC);
+	if (t == NULL)
+		goto out;
+
+	memset(t, 0, sizeof(*t));
+
+	t->buf = kmalloc(TX_BUF_SIZE, GFP_ATOMIC);
+	if (t->buf == NULL)
+		goto out;
+
+	t->tx_cxt = tx;
+
+	return t;
+out:
+	if (t) {
+		kfree(t->buf);
+		kfree(t);
+	}
+	return NULL;
+}
+
+static void free_tx_struct(struct sdio_tx *t)
+{
+	if (t) {
+		kfree(t->buf);
+		kfree(t);
+	}
+}
+
+static struct sdio_rx *alloc_rx_struct(struct rx_cxt *rx)
+{
+	struct sdio_rx *r = NULL;
+
+	r = kmalloc(sizeof(*r), GFP_ATOMIC);
+	if (r == NULL)
+		goto out;
+
+	memset(r, 0, sizeof(*r));
+
+	r->rx_cxt = rx;
+
+	return r;
+out:
+	kfree(r);
+	return NULL;
+}
+
+static void free_rx_struct(struct sdio_rx *r)
+{
+	kfree(r);
+}
+
+/* Before this function is called, spin lock should be locked. */
+static struct sdio_tx *get_tx_struct(struct tx_cxt *tx, int *no_spc)
+{
+	struct sdio_tx *t;
+
+	if (list_empty(&tx->free_list))
+		return NULL;
+
+	t = list_entry(tx->free_list.prev, struct sdio_tx, list);
+	list_del(&t->list);
+
+	*no_spc = list_empty(&tx->free_list) ? 1 : 0;
+
+	return t;
+}
+
+/* Before this function is called, spin lock should be locked. */
+static void put_tx_struct(struct tx_cxt *tx, struct sdio_tx *t)
+{
+	list_add_tail(&t->list, &tx->free_list);
+}
+
+/* Before this function is called, spin lock should be locked. */
+static struct sdio_rx *get_rx_struct(struct rx_cxt *rx)
+{
+	struct sdio_rx *r;
+
+	if (list_empty(&rx->free_list))
+		return NULL;
+
+	r = list_entry(rx->free_list.prev, struct sdio_rx, list);
+	list_del(&r->list);
+
+	return r;
+}
+
+/* Before this function is called, spin lock should be locked. */
+static void put_rx_struct(struct rx_cxt *rx, struct sdio_rx *r)
+{
+	list_add_tail(&r->list, &rx->free_list);
+}
+
+static int init_sdio(struct sdiowm_dev *sdev)
+{
+	int ret = 0, i;
+	struct tx_cxt	*tx = &sdev->tx;
+	struct rx_cxt	*rx = &sdev->rx;
+	struct sdio_tx	*t;
+	struct sdio_rx	*r;
+
+	INIT_LIST_HEAD(&tx->free_list);
+	INIT_LIST_HEAD(&tx->sdu_list);
+	INIT_LIST_HEAD(&tx->hci_list);
+
+	spin_lock_init(&tx->lock);
+
+	tx->sdu_buf = kmalloc(SDU_TX_BUF_SIZE, GFP_KERNEL);
+	if (tx->sdu_buf == NULL) {
+		printk(KERN_ERR "Failed to allocate SDU tx buffer.\n");
+		goto fail;
+	}
+
+	for (i = 0; i < MAX_NR_SDU_BUF; i++) {
+		t = alloc_tx_struct(tx);
+		if (t == NULL) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+		list_add(&t->list, &tx->free_list);
+	}
+
+	INIT_LIST_HEAD(&rx->free_list);
+	INIT_LIST_HEAD(&rx->req_list);
+
+	spin_lock_init(&rx->lock);
+
+	for (i = 0; i < MAX_NR_RX_BUF; i++) {
+		r = alloc_rx_struct(rx);
+		if (r == NULL) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+		list_add(&r->list, &rx->free_list);
+	}
+
+	rx->rx_buf = kmalloc(RX_BUF_SIZE, GFP_KERNEL);
+	if (rx->rx_buf == NULL) {
+		printk(KERN_ERR "Failed to allocate rx buffer.\n");
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	release_sdio(sdev);
+	return ret;
+}
+
+static void release_sdio(struct sdiowm_dev *sdev)
+{
+	struct tx_cxt	*tx = &sdev->tx;
+	struct rx_cxt	*rx = &sdev->rx;
+	struct sdio_tx	*t, *t_next;
+	struct sdio_rx	*r, *r_next;
+
+	kfree(tx->sdu_buf);
+
+	list_for_each_entry_safe(t, t_next, &tx->free_list, list) {
+		list_del(&t->list);
+		free_tx_struct(t);
+	}
+
+	list_for_each_entry_safe(t, t_next, &tx->sdu_list, list) {
+		list_del(&t->list);
+		free_tx_struct(t);
+	}
+
+	list_for_each_entry_safe(t, t_next, &tx->hci_list, list) {
+		list_del(&t->list);
+		free_tx_struct(t);
+	}
+
+	kfree(rx->rx_buf);
+
+	list_for_each_entry_safe(r, r_next, &rx->free_list, list) {
+		list_del(&r->list);
+		free_rx_struct(r);
+	}
+
+	list_for_each_entry_safe(r, r_next, &rx->req_list, list) {
+		list_del(&r->list);
+		free_rx_struct(r);
+	}
+}
+
+static void send_sdio_pkt(struct sdio_func *func, u8 *data, int len)
+{
+	int n, blocks, ret, remain;
+
+	sdio_claim_host(func);
+
+	blocks = len / func->cur_blksize;
+	n = blocks * func->cur_blksize;
+	if (blocks) {
+		ret = sdio_memcpy_toio(func, 0, data, n);
+		if (ret < 0) {
+			if (ret != -ENOMEDIUM)
+				printk(KERN_ERR "gdmwms: %s error: ret = %d\n",
+					__func__, ret);
+			goto end_io;
+		}
+	}
+
+	remain = len - n;
+	remain = (remain + 3) & ~3;
+
+	if (remain) {
+		ret = sdio_memcpy_toio(func, 0, data + n, remain);
+		if (ret < 0) {
+			if (ret != -ENOMEDIUM)
+				printk(KERN_ERR "gdmwms: %s error: ret = %d\n",
+					__func__, ret);
+			goto end_io;
+		}
+	}
+
+end_io:
+	sdio_release_host(func);
+}
+
+static void send_sdu(struct sdio_func *func, struct tx_cxt *tx)
+{
+	struct list_head *l, *next;
+	struct hci_s *hci;
+	struct sdio_tx *t;
+	int pos, len, i, estlen, aggr_num = 0, aggr_len;
+	u8 *buf;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx->lock, flags);
+
+	pos = TYPE_A_HEADER_SIZE + HCI_HEADER_SIZE;
+	list_for_each_entry(t, &tx->sdu_list, list) {
+		estlen = ((t->len + 3) & ~3) + 4;
+		if ((pos + estlen) > SDU_TX_BUF_SIZE)
+			break;
+
+		aggr_num++;
+		memcpy(tx->sdu_buf + pos, t->buf, t->len);
+		memset(tx->sdu_buf + pos + t->len, 0, estlen - t->len);
+		pos += estlen;
+	}
+	aggr_len = pos;
+
+	hci = (struct hci_s *)(tx->sdu_buf + TYPE_A_HEADER_SIZE);
+	hci->cmd_evt = H2B(WIMAX_TX_SDU_AGGR);
+	hci->length = H2B(aggr_len - TYPE_A_HEADER_SIZE - HCI_HEADER_SIZE);
+
+	spin_unlock_irqrestore(&tx->lock, flags);
+
+#ifdef DEBUG
+	hexdump("sdio_send", tx->sdu_buf + TYPE_A_HEADER_SIZE,
+		aggr_len - TYPE_A_HEADER_SIZE);
+#endif
+
+	for (pos = TYPE_A_HEADER_SIZE; pos < aggr_len; pos += TX_CHUNK_SIZE) {
+		len = aggr_len - pos;
+		len = len > TX_CHUNK_SIZE ? TX_CHUNK_SIZE : len;
+		buf = tx->sdu_buf + pos - TYPE_A_HEADER_SIZE;
+
+		buf[0] = len & 0xff;
+		buf[1] = (len >> 8) & 0xff;
+		buf[2] = (len >> 16) & 0xff;
+		buf[3] = (pos + len) >= aggr_len ? 0 : 1;
+		send_sdio_pkt(func, buf, len + TYPE_A_HEADER_SIZE);
+	}
+
+	spin_lock_irqsave(&tx->lock, flags);
+
+	for (l = tx->sdu_list.next, i = 0; i < aggr_num; i++, l = next) {
+		next = l->next;
+		t = list_entry(l, struct sdio_tx, list);
+		if (t->callback)
+			t->callback(t->cb_data);
+
+		list_del(l);
+		put_tx_struct(t->tx_cxt, t);
+	}
+
+	do_gettimeofday(&tx->sdu_stamp);
+	spin_unlock_irqrestore(&tx->lock, flags);
+}
+
+static void send_hci(struct sdio_func *func, struct tx_cxt *tx,
+			struct sdio_tx *t)
+{
+	unsigned long flags;
+
+#ifdef DEBUG
+	hexdump("sdio_send", t->buf + TYPE_A_HEADER_SIZE,
+		t->len - TYPE_A_HEADER_SIZE);
+#endif
+	send_sdio_pkt(func, t->buf, t->len);
+
+	spin_lock_irqsave(&tx->lock, flags);
+	if (t->callback)
+		t->callback(t->cb_data);
+	free_tx_struct(t);
+	spin_unlock_irqrestore(&tx->lock, flags);
+}
+
+static void do_tx(struct work_struct *work)
+{
+	struct sdiowm_dev *sdev = container_of(work, struct sdiowm_dev, ws);
+	struct sdio_func *func = sdev->func;
+	struct tx_cxt *tx = &sdev->tx;
+	struct sdio_tx *t = NULL;
+	struct timeval now, *before;
+	int is_sdu = 0;
+	long diff;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx->lock, flags);
+	if (!tx->can_send) {
+		spin_unlock_irqrestore(&tx->lock, flags);
+		return;
+	}
+
+	if (!list_empty(&tx->hci_list)) {
+		t = list_entry(tx->hci_list.next, struct sdio_tx, list);
+		list_del(&t->list);
+		is_sdu = 0;
+	} else if (!tx->stop_sdu_tx && !list_empty(&tx->sdu_list)) {
+		do_gettimeofday(&now);
+		before = &tx->sdu_stamp;
+
+		diff = (now.tv_sec - before->tv_sec) * 1000000 +
+			(now.tv_usec - before->tv_usec);
+		if (diff >= 0 && diff < TX_INTERVAL) {
+			schedule_work(&sdev->ws);
+			spin_unlock_irqrestore(&tx->lock, flags);
+			return;
+		}
+		is_sdu = 1;
+	}
+
+	if (!is_sdu && t == NULL) {
+		spin_unlock_irqrestore(&tx->lock, flags);
+		return;
+	}
+
+	tx->can_send = 0;
+
+	spin_unlock_irqrestore(&tx->lock, flags);
+
+	if (is_sdu)
+		send_sdu(func, tx);
+	else
+		send_hci(func, tx, t);
+}
+
+static int gdm_sdio_send(void *priv_dev, void *data, int len,
+			void (*cb)(void *data), void *cb_data)
+{
+	struct sdiowm_dev *sdev = priv_dev;
+	struct tx_cxt *tx = &sdev->tx;
+	struct sdio_tx *t;
+	u8 *pkt = data;
+	int no_spc = 0;
+	u16 cmd_evt;
+	unsigned long flags;
+
+	BUG_ON(len > TX_BUF_SIZE - TYPE_A_HEADER_SIZE);
+
+	spin_lock_irqsave(&tx->lock, flags);
+
+	cmd_evt = (pkt[0] << 8) | pkt[1];
+	if (cmd_evt == WIMAX_TX_SDU) {
+		t = get_tx_struct(tx, &no_spc);
+		if (t == NULL) {
+			/* This case must not happen. */
+			spin_unlock_irqrestore(&tx->lock, flags);
+			return -ENOSPC;
+		}
+		list_add_tail(&t->list, &tx->sdu_list);
+
+		memcpy(t->buf, data, len);
+
+		t->len = len;
+		t->callback = cb;
+		t->cb_data = cb_data;
+	} else {
+		t = alloc_tx_struct(tx);
+		if (t == NULL) {
+			spin_unlock_irqrestore(&tx->lock, flags);
+			return -ENOMEM;
+		}
+		list_add_tail(&t->list, &tx->hci_list);
+
+		t->buf[0] = len & 0xff;
+		t->buf[1] = (len >> 8) & 0xff;
+		t->buf[2] = (len >> 16) & 0xff;
+		t->buf[3] = 2;
+		memcpy(t->buf + TYPE_A_HEADER_SIZE, data, len);
+
+		t->len = len + TYPE_A_HEADER_SIZE;
+		t->callback = cb;
+		t->cb_data = cb_data;
+	}
+
+	if (tx->can_send)
+		schedule_work(&sdev->ws);
+
+	spin_unlock_irqrestore(&tx->lock, flags);
+
+	if (no_spc)
+		return -ENOSPC;
+
+	return 0;
+}
+
+/*
+ * Handle the HCI, WIMAX_SDU_TX_FLOW.
+ */
+static int control_sdu_tx_flow(struct sdiowm_dev *sdev, u8 *hci_data, int len)
+{
+	struct tx_cxt *tx = &sdev->tx;
+	u16 cmd_evt;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tx->lock, flags);
+
+	cmd_evt = (hci_data[0] << 8) | (hci_data[1]);
+	if (cmd_evt != WIMAX_SDU_TX_FLOW)
+		goto out;
+
+	if (hci_data[4] == 0) {
+#ifdef DEBUG
+		printk(KERN_DEBUG "WIMAX ==> STOP SDU TX\n");
+#endif
+		tx->stop_sdu_tx = 1;
+	} else if (hci_data[4] == 1) {
+#ifdef DEBUG
+		printk(KERN_DEBUG "WIMAX ==> START SDU TX\n");
+#endif
+		tx->stop_sdu_tx = 0;
+		if (tx->can_send)
+			schedule_work(&sdev->ws);
+		/*
+		 * If free buffer for sdu tx doesn't exist, then tx queue
+		 * should not be woken. For this reason, don't pass the command,
+		 * START_SDU_TX.
+		 */
+		if (list_empty(&tx->free_list))
+			len = 0;
+	}
+
+out:
+	spin_unlock_irqrestore(&tx->lock, flags);
+	return len;
+}
+
+static void gdm_sdio_irq(struct sdio_func *func)
+{
+	struct phy_dev *phy_dev = sdio_get_drvdata(func);
+	struct sdiowm_dev *sdev = phy_dev->priv_dev;
+	struct tx_cxt *tx = &sdev->tx;
+	struct rx_cxt *rx = &sdev->rx;
+	struct sdio_rx *r;
+	unsigned long flags;
+	u8 val, hdr[TYPE_A_LOOKAHEAD_SIZE], *buf;
+	u32 len, blocks, n;
+	int ret, remain;
+
+	/* Check interrupt */
+	val = sdio_readb(func, 0x13, &ret);
+	if (val & 0x01)
+		sdio_writeb(func, 0x01, 0x13, &ret);	/* clear interrupt */
+	else
+		return;
+
+	ret = sdio_memcpy_fromio(func, hdr, 0x0, TYPE_A_LOOKAHEAD_SIZE);
+	if (ret) {
+		printk(KERN_ERR "Cannot read from function %d\n", func->num);
+		goto done;
+	}
+
+	len = (hdr[2] << 16) | (hdr[1] << 8) | hdr[0];
+	if (len > (RX_BUF_SIZE - TYPE_A_HEADER_SIZE)) {
+		printk(KERN_ERR "Too big Type-A size: %d\n", len);
+		goto done;
+	}
+
+	if (hdr[3] == 1) {	/* Ack */
+#ifdef DEBUG
+		u32 *ack_seq = (u32 *)&hdr[4];
+#endif
+		spin_lock_irqsave(&tx->lock, flags);
+		tx->can_send = 1;
+
+		if (!list_empty(&tx->sdu_list) || !list_empty(&tx->hci_list))
+			schedule_work(&sdev->ws);
+		spin_unlock_irqrestore(&tx->lock, flags);
+#ifdef DEBUG
+		printk(KERN_DEBUG "Ack... %0x\n", ntohl(*ack_seq));
+#endif
+		goto done;
+	}
+
+	memcpy(rx->rx_buf, hdr + TYPE_A_HEADER_SIZE,
+			TYPE_A_LOOKAHEAD_SIZE - TYPE_A_HEADER_SIZE);
+
+	buf = rx->rx_buf + TYPE_A_LOOKAHEAD_SIZE - TYPE_A_HEADER_SIZE;
+	remain = len - TYPE_A_LOOKAHEAD_SIZE + TYPE_A_HEADER_SIZE;
+	if (remain <= 0)
+		goto end_io;
+
+	blocks = remain / func->cur_blksize;
+
+	if (blocks) {
+		n = blocks * func->cur_blksize;
+		ret = sdio_memcpy_fromio(func, buf, 0x0, n);
+		if (ret) {
+			printk(KERN_ERR "Cannot read from function %d\n",
+				func->num);
+			goto done;
+		}
+		buf += n;
+		remain -= n;
+	}
+
+	if (remain) {
+		ret = sdio_memcpy_fromio(func, buf, 0x0, remain);
+		if (ret) {
+			printk(KERN_ERR "Cannot read from function %d\n",
+				func->num);
+			goto done;
+		}
+	}
+
+end_io:
+#ifdef DEBUG
+	hexdump("sdio_receive", rx->rx_buf, len);
+#endif
+	len = control_sdu_tx_flow(sdev, rx->rx_buf, len);
+
+	spin_lock_irqsave(&rx->lock, flags);
+
+	if (!list_empty(&rx->req_list)) {
+		r = list_entry(rx->req_list.next, struct sdio_rx, list);
+		spin_unlock_irqrestore(&rx->lock, flags);
+		if (r->callback)
+			r->callback(r->cb_data, rx->rx_buf, len);
+		spin_lock_irqsave(&rx->lock, flags);
+		list_del(&r->list);
+		put_rx_struct(rx, r);
+	}
+
+	spin_unlock_irqrestore(&rx->lock, flags);
+
+done:
+	sdio_writeb(func, 0x00, 0x10, &ret);	/* PCRRT */
+	if (!phy_dev->netdev)
+		register_wimax_device(phy_dev, &func->dev);
+}
+
+static int gdm_sdio_receive(void *priv_dev,
+				void (*cb)(void *cb_data, void *data, int len),
+				void *cb_data)
+{
+	struct sdiowm_dev *sdev = priv_dev;
+	struct rx_cxt *rx = &sdev->rx;
+	struct sdio_rx *r;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rx->lock, flags);
+	r = get_rx_struct(rx);
+	if (r == NULL) {
+		spin_unlock_irqrestore(&rx->lock, flags);
+		return -ENOMEM;
+	}
+
+	r->callback = cb;
+	r->cb_data = cb_data;
+
+	list_add_tail(&r->list, &rx->req_list);
+	spin_unlock_irqrestore(&rx->lock, flags);
+
+	return 0;
+}
+
+static int sdio_wimax_probe(struct sdio_func *func,
+				const struct sdio_device_id *id)
+{
+	int ret;
+	struct phy_dev *phy_dev = NULL;
+	struct sdiowm_dev *sdev = NULL;
+
+	printk(KERN_INFO "Found GDM SDIO VID = 0x%04x PID = 0x%04x...\n",
+			func->vendor, func->device);
+	printk(KERN_INFO "GCT WiMax driver version %s\n", DRIVER_VERSION);
+
+	sdio_claim_host(func);
+	sdio_enable_func(func);
+	sdio_claim_irq(func, gdm_sdio_irq);
+
+	ret = sdio_boot(func);
+	if (ret)
+		return ret;
+
+	phy_dev = kmalloc(sizeof(*phy_dev), GFP_KERNEL);
+	if (phy_dev == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	sdev = kmalloc(sizeof(*sdev), GFP_KERNEL);
+	if (sdev == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memset(phy_dev, 0, sizeof(*phy_dev));
+	memset(sdev, 0, sizeof(*sdev));
+
+	phy_dev->priv_dev = (void *)sdev;
+	phy_dev->send_func = gdm_sdio_send;
+	phy_dev->rcv_func = gdm_sdio_receive;
+
+	ret = init_sdio(sdev);
+	if (sdev < 0)
+		goto out;
+
+	sdev->func = func;
+
+	sdio_writeb(func, 1, 0x14, &ret);	/* Enable interrupt */
+	sdio_release_host(func);
+
+	INIT_WORK(&sdev->ws, do_tx);
+
+	sdio_set_drvdata(func, phy_dev);
+out:
+	if (ret) {
+		kfree(phy_dev);
+		kfree(sdev);
+	}
+
+	return ret;
+}
+
+static void sdio_wimax_remove(struct sdio_func *func)
+{
+	struct phy_dev *phy_dev = sdio_get_drvdata(func);
+	struct sdiowm_dev *sdev = phy_dev->priv_dev;
+
+	if (phy_dev->netdev)
+		unregister_wimax_device(phy_dev);
+	sdio_claim_host(func);
+	sdio_release_irq(func);
+	sdio_disable_func(func);
+	sdio_release_host(func);
+	release_sdio(sdev);
+
+	kfree(sdev);
+	kfree(phy_dev);
+}
+
+static const struct sdio_device_id sdio_wimax_ids[] = {
+	{ SDIO_DEVICE(0x0296, 0x5347) },
+	{0}
+};
+
+MODULE_DEVICE_TABLE(sdio, sdio_wimax_ids);
+
+static struct sdio_driver sdio_wimax_driver = {
+	.probe		= sdio_wimax_probe,
+	.remove		= sdio_wimax_remove,
+	.name		= "sdio_wimax",
+	.id_table	= sdio_wimax_ids,
+};
+
+static int __init sdio_gdm_wimax_init(void)
+{
+	return sdio_register_driver(&sdio_wimax_driver);
+}
+
+static void __exit sdio_gdm_wimax_exit(void)
+{
+	sdio_unregister_driver(&sdio_wimax_driver);
+}
+
+module_init(sdio_gdm_wimax_init);
+module_exit(sdio_gdm_wimax_exit);
+
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_DESCRIPTION("GCT WiMax SDIO Device Driver");
+MODULE_AUTHOR("Ethan Park");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/gdm72xx/gdm_sdio.h b/drivers/staging/gdm72xx/gdm_sdio.h
new file mode 100644
index 000000000000..216e98f31bae
--- /dev/null
+++ b/drivers/staging/gdm72xx/gdm_sdio.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __GDM_SDIO_H__
+#define __GDM_SDIO_H__
+
+#include <linux/types.h>
+#include <linux/time.h>
+
+#define MAX_NR_SDU_BUF  64
+
+struct sdio_tx {
+	struct list_head	list;
+	struct tx_cxt		*tx_cxt;
+
+	u8	*buf;
+	int	len;
+
+	void (*callback)(void *cb_data);
+	void *cb_data;
+};
+
+struct tx_cxt {
+	struct list_head	free_list;
+	struct list_head	sdu_list;
+	struct list_head	hci_list;
+	struct timeval		sdu_stamp;
+
+	u8	*sdu_buf;
+
+	spinlock_t			lock;
+	int	can_send;
+	int stop_sdu_tx;
+};
+
+struct sdio_rx {
+	struct list_head	list;
+	struct rx_cxt		*rx_cxt;
+
+	void (*callback)(void *cb_data, void *data, int len);
+	void *cb_data;
+};
+
+struct rx_cxt {
+	struct list_head	free_list;
+	struct list_head	req_list;
+
+	u8		*rx_buf;
+
+	spinlock_t			lock;
+};
+
+struct sdiowm_dev {
+	struct sdio_func	*func;
+
+	struct tx_cxt	tx;
+	struct rx_cxt	rx;
+
+	struct work_struct	ws;
+};
+
+#endif /* __GDM_SDIO_H__ */
diff --git a/drivers/staging/gdm72xx/gdm_usb.c b/drivers/staging/gdm72xx/gdm_usb.c
new file mode 100644
index 000000000000..1e9dc0d90362
--- /dev/null
+++ b/drivers/staging/gdm72xx/gdm_usb.c
@@ -0,0 +1,798 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <asm/byteorder.h>
+
+#include "gdm_usb.h"
+#include "gdm_wimax.h"
+#include "usb_boot.h"
+#include "hci.h"
+
+#include "usb_ids.h"
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+#define TX_BUF_SIZE	2048
+#if defined(CONFIG_WIMAX_GDM72XX_WIMAX2)
+#define RX_BUF_SIZE	(128*1024)	/* For packet aggregation */
+#else
+#define RX_BUF_SIZE	2048
+#endif
+
+#define GDM7205_PADDING		256
+
+#define H2B(x)		__cpu_to_be16(x)
+#define B2H(x)		__be16_to_cpu(x)
+#define DB2H(x)		__be32_to_cpu(x)
+
+#define DOWNLOAD_CONF_VALUE		0x21
+
+#ifdef CONFIG_WIMAX_GDM72XX_K_MODE
+
+static DECLARE_WAIT_QUEUE_HEAD(k_wait);
+static LIST_HEAD(k_list);
+static DEFINE_SPINLOCK(k_lock);
+static int k_mode_stop;
+
+#define K_WAIT_TIME	(2 * HZ / 100)
+
+#endif /* CONFIG_WIMAX_GDM72XX_K_MODE */
+
+static int init_usb(struct usbwm_dev *udev);
+static void release_usb(struct usbwm_dev *udev);
+
+/*#define DEBUG */
+#ifdef DEBUG
+static void hexdump(char *title, u8 *data, int len)
+{
+	int i;
+
+	printk(KERN_DEBUG "%s: length = %d\n", title, len);
+	for (i = 0; i < len; i++) {
+		printk(KERN_DEBUG "%02x ", data[i]);
+		if ((i & 0xf) == 0xf)
+			printk(KERN_DEBUG "\n");
+	}
+	printk(KERN_DEBUG "\n");
+}
+#endif
+
+static struct usb_tx *alloc_tx_struct(struct tx_cxt *tx)
+{
+	struct usb_tx *t = NULL;
+
+	t = kmalloc(sizeof(*t), GFP_ATOMIC);
+	if (t == NULL)
+		goto out;
+
+	memset(t, 0, sizeof(*t));
+
+	t->urb = usb_alloc_urb(0, GFP_ATOMIC);
+	t->buf = kmalloc(TX_BUF_SIZE, GFP_ATOMIC);
+	if (t->urb == NULL || t->buf == NULL)
+		goto out;
+
+	t->tx_cxt = tx;
+
+	return t;
+out:
+	if (t) {
+		usb_free_urb(t->urb);
+		kfree(t->buf);
+		kfree(t);
+	}
+	return NULL;
+}
+
+static void free_tx_struct(struct usb_tx *t)
+{
+	if (t) {
+		usb_free_urb(t->urb);
+		kfree(t->buf);
+		kfree(t);
+	}
+}
+
+static struct usb_rx *alloc_rx_struct(struct rx_cxt *rx)
+{
+	struct usb_rx *r = NULL;
+
+	r = kmalloc(sizeof(*r), GFP_ATOMIC);
+	if (r == NULL)
+		goto out;
+
+	memset(r, 0, sizeof(*r));
+
+	r->urb = usb_alloc_urb(0, GFP_ATOMIC);
+	r->buf = kmalloc(RX_BUF_SIZE, GFP_ATOMIC);
+	if (r->urb == NULL || r->buf == NULL)
+		goto out;
+
+	r->rx_cxt = rx;
+	return r;
+out:
+	if (r) {
+		usb_free_urb(r->urb);
+		kfree(r->buf);
+		kfree(r);
+	}
+	return NULL;
+}
+
+static void free_rx_struct(struct usb_rx *r)
+{
+	if (r) {
+		usb_free_urb(r->urb);
+		kfree(r->buf);
+		kfree(r);
+	}
+}
+
+/* Before this function is called, spin lock should be locked. */
+static struct usb_tx *get_tx_struct(struct tx_cxt *tx, int *no_spc)
+{
+	struct usb_tx *t;
+
+	if (list_empty(&tx->free_list)) {
+		*no_spc = 1;
+		return NULL;
+	}
+
+	t = list_entry(tx->free_list.next, struct usb_tx, list);
+	list_del(&t->list);
+
+	*no_spc = list_empty(&tx->free_list) ? 1 : 0;
+
+	return t;
+}
+
+/* Before this function is called, spin lock should be locked. */
+static void put_tx_struct(struct tx_cxt *tx, struct usb_tx *t)
+{
+	list_add_tail(&t->list, &tx->free_list);
+}
+
+/* Before this function is called, spin lock should be locked. */
+static struct usb_rx *get_rx_struct(struct rx_cxt *rx)
+{
+	struct usb_rx *r;
+
+	if (list_empty(&rx->free_list)) {
+		r = alloc_rx_struct(rx);
+		if (r == NULL)
+			return NULL;
+
+		list_add(&r->list, &rx->free_list);
+	}
+
+	r = list_entry(rx->free_list.next, struct usb_rx, list);
+	list_del(&r->list);
+	list_add_tail(&r->list, &rx->used_list);
+
+	return r;
+}
+
+/* Before this function is called, spin lock should be locked. */
+static void put_rx_struct(struct rx_cxt *rx, struct usb_rx *r)
+{
+	list_del(&r->list);
+	list_add(&r->list, &rx->free_list);
+}
+
+static int init_usb(struct usbwm_dev *udev)
+{
+	int ret = 0, i;
+	struct tx_cxt	*tx = &udev->tx;
+	struct rx_cxt	*rx = &udev->rx;
+	struct usb_tx	*t;
+	struct usb_rx	*r;
+
+	INIT_LIST_HEAD(&tx->free_list);
+	INIT_LIST_HEAD(&tx->sdu_list);
+	INIT_LIST_HEAD(&tx->hci_list);
+#if defined(CONFIG_WIMAX_GDM72XX_USB_PM) || defined(CONFIG_WIMAX_GDM72XX_K_MODE)
+	INIT_LIST_HEAD(&tx->pending_list);
+#endif
+
+	INIT_LIST_HEAD(&rx->free_list);
+	INIT_LIST_HEAD(&rx->used_list);
+
+	spin_lock_init(&tx->lock);
+	spin_lock_init(&rx->lock);
+
+	for (i = 0; i < MAX_NR_SDU_BUF; i++) {
+		t = alloc_tx_struct(tx);
+		if (t == NULL) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+		list_add(&t->list, &tx->free_list);
+	}
+
+	r = alloc_rx_struct(rx);
+	if (r == NULL) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	list_add(&r->list, &rx->free_list);
+	return ret;
+
+fail:
+	release_usb(udev);
+	return ret;
+}
+
+static void release_usb(struct usbwm_dev *udev)
+{
+	struct tx_cxt	*tx = &udev->tx;
+	struct rx_cxt	*rx = &udev->rx;
+	struct usb_tx	*t, *t_next;
+	struct usb_rx	*r, *r_next;
+
+	list_for_each_entry_safe(t, t_next, &tx->sdu_list, list) {
+		list_del(&t->list);
+		free_tx_struct(t);
+	}
+
+	list_for_each_entry_safe(t, t_next, &tx->hci_list, list) {
+		list_del(&t->list);
+		free_tx_struct(t);
+	}
+
+	list_for_each_entry_safe(t, t_next, &tx->free_list, list) {
+		list_del(&t->list);
+		free_tx_struct(t);
+	}
+
+	list_for_each_entry_safe(r, r_next, &rx->free_list, list) {
+		list_del(&r->list);
+		free_rx_struct(r);
+	}
+
+	list_for_each_entry_safe(r, r_next, &rx->used_list, list) {
+		list_del(&r->list);
+		free_rx_struct(r);
+	}
+}
+
+static void gdm_usb_send_complete(struct urb *urb)
+{
+	struct usb_tx *t = urb->context;
+	struct tx_cxt *tx = t->tx_cxt;
+	u8 *pkt = t->buf;
+	u16 cmd_evt;
+	unsigned long flags;
+
+	/* Completion by usb_unlink_urb */
+	if (urb->status == -ECONNRESET)
+		return;
+
+	spin_lock_irqsave(&tx->lock, flags);
+
+	if (t->callback)
+		t->callback(t->cb_data);
+
+	/* Delete from sdu list or hci list. */
+	list_del(&t->list);
+
+	cmd_evt = (pkt[0] << 8) | pkt[1];
+	if (cmd_evt == WIMAX_TX_SDU)
+		put_tx_struct(tx, t);
+	else
+		free_tx_struct(t);
+
+	spin_unlock_irqrestore(&tx->lock, flags);
+}
+
+static int gdm_usb_send(void *priv_dev, void *data, int len,
+			void (*cb)(void *data), void *cb_data)
+{
+	struct usbwm_dev *udev = priv_dev;
+	struct usb_device *usbdev = udev->usbdev;
+	struct tx_cxt *tx = &udev->tx;
+	struct usb_tx *t;
+	int padding = udev->padding;
+	int no_spc = 0, ret;
+	u8 *pkt = data;
+	u16 cmd_evt;
+	unsigned long flags;
+
+	if (!udev->usbdev) {
+		printk(KERN_ERR "%s: No such device\n", __func__);
+		return -ENODEV;
+	}
+
+	BUG_ON(len > TX_BUF_SIZE - padding - 1);
+
+	spin_lock_irqsave(&tx->lock, flags);
+
+	cmd_evt = (pkt[0] << 8) | pkt[1];
+	if (cmd_evt == WIMAX_TX_SDU) {
+		t = get_tx_struct(tx, &no_spc);
+		if (t == NULL) {
+			/* This case must not happen. */
+			spin_unlock_irqrestore(&tx->lock, flags);
+			return -ENOSPC;
+		}
+		list_add_tail(&t->list, &tx->sdu_list);
+	} else {
+		t = alloc_tx_struct(tx);
+		if (t == NULL) {
+			spin_unlock_irqrestore(&tx->lock, flags);
+			return -ENOMEM;
+		}
+		list_add_tail(&t->list, &tx->hci_list);
+	}
+
+	memcpy(t->buf + padding, data, len);
+	t->callback = cb;
+	t->cb_data = cb_data;
+
+	/*
+	 * In some cases, USB Module of WiMax is blocked when data size is
+	 * the multiple of 512. So, increment length by one in that case.
+	 */
+	if ((len % 512) == 0)
+		len++;
+
+	usb_fill_bulk_urb(t->urb,
+			usbdev,
+			usb_sndbulkpipe(usbdev, 1),
+			t->buf,
+			len + padding,
+			gdm_usb_send_complete,
+			t);
+
+#ifdef DEBUG
+	hexdump("usb_send", t->buf, len + padding);
+#endif
+#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
+	if (usbdev->state & USB_STATE_SUSPENDED) {
+		list_add_tail(&t->p_list, &tx->pending_list);
+		schedule_work(&udev->pm_ws);
+		goto out;
+	}
+#endif /* CONFIG_WIMAX_GDM72XX_USB_PM */
+
+#ifdef CONFIG_WIMAX_GDM72XX_K_MODE
+	if (udev->bw_switch) {
+		list_add_tail(&t->p_list, &tx->pending_list);
+		goto out;
+	} else if (cmd_evt == WIMAX_SCAN) {
+		struct rx_cxt *rx;
+		struct usb_rx *r;
+
+		rx = &udev->rx;
+
+		list_for_each_entry(r, &rx->used_list, list)
+			usb_unlink_urb(r->urb);
+		udev->bw_switch = 1;
+
+		spin_lock(&k_lock);
+		list_add_tail(&udev->list, &k_list);
+		spin_unlock(&k_lock);
+
+		wake_up(&k_wait);
+	}
+#endif /* CONFIG_WIMAX_GDM72XX_K_MODE */
+
+	ret = usb_submit_urb(t->urb, GFP_ATOMIC);
+	if (ret)
+		goto send_fail;
+
+#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
+	usb_mark_last_busy(usbdev);
+#endif /* CONFIG_WIMAX_GDM72XX_USB_PM */
+
+#if defined(CONFIG_WIMAX_GDM72XX_USB_PM) || defined(CONFIG_WIMAX_GDM72XX_K_MODE)
+out:
+#endif
+	spin_unlock_irqrestore(&tx->lock, flags);
+
+	if (no_spc)
+		return -ENOSPC;
+
+	return 0;
+
+send_fail:
+	t->callback = NULL;
+	gdm_usb_send_complete(t->urb);
+	spin_unlock_irqrestore(&tx->lock, flags);
+	return ret;
+}
+
+static void gdm_usb_rcv_complete(struct urb *urb)
+{
+	struct usb_rx *r = urb->context;
+	struct rx_cxt *rx = r->rx_cxt;
+	struct usbwm_dev *udev = container_of(r->rx_cxt, struct usbwm_dev, rx);
+	struct tx_cxt *tx = &udev->tx;
+	struct usb_tx *t;
+	u16 cmd_evt;
+	unsigned long flags;
+
+#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
+	struct usb_device *dev = urb->dev;
+#endif
+
+	/* Completion by usb_unlink_urb */
+	if (urb->status == -ECONNRESET)
+		return;
+
+	spin_lock_irqsave(&tx->lock, flags);
+
+	if (!urb->status) {
+		cmd_evt = (r->buf[0] << 8) | (r->buf[1]);
+#ifdef DEBUG
+		hexdump("usb_receive", r->buf, urb->actual_length);
+#endif
+		if (cmd_evt == WIMAX_SDU_TX_FLOW) {
+			if (r->buf[4] == 0) {
+#ifdef DEBUG
+				printk(KERN_DEBUG "WIMAX ==> STOP SDU TX\n");
+#endif
+				list_for_each_entry(t, &tx->sdu_list, list)
+					usb_unlink_urb(t->urb);
+			} else if (r->buf[4] == 1) {
+#ifdef DEBUG
+				printk(KERN_DEBUG "WIMAX ==> START SDU TX\n");
+#endif
+				list_for_each_entry(t, &tx->sdu_list, list) {
+					usb_submit_urb(t->urb, GFP_ATOMIC);
+				}
+				/*
+				 * If free buffer for sdu tx doesn't
+				 * exist, then tx queue should not be
+				 * woken. For this reason, don't pass
+				 * the command, START_SDU_TX.
+				 */
+				if (list_empty(&tx->free_list))
+					urb->actual_length = 0;
+			}
+		}
+	}
+
+	if (!urb->status && r->callback)
+		r->callback(r->cb_data, r->buf, urb->actual_length);
+
+	spin_lock(&rx->lock);
+	put_rx_struct(rx, r);
+	spin_unlock(&rx->lock);
+
+	spin_unlock_irqrestore(&tx->lock, flags);
+
+#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
+	usb_mark_last_busy(dev);
+#endif
+}
+
+static int gdm_usb_receive(void *priv_dev,
+			void (*cb)(void *cb_data, void *data, int len),
+			void *cb_data)
+{
+	struct usbwm_dev *udev = priv_dev;
+	struct usb_device *usbdev = udev->usbdev;
+	struct rx_cxt *rx = &udev->rx;
+	struct usb_rx *r;
+	unsigned long flags;
+
+	if (!udev->usbdev) {
+		printk(KERN_ERR "%s: No such device\n", __func__);
+		return -ENODEV;
+	}
+
+	spin_lock_irqsave(&rx->lock, flags);
+	r = get_rx_struct(rx);
+	spin_unlock_irqrestore(&rx->lock, flags);
+
+	if (r == NULL)
+		return -ENOMEM;
+
+	r->callback = cb;
+	r->cb_data = cb_data;
+
+	usb_fill_bulk_urb(r->urb,
+			usbdev,
+			usb_rcvbulkpipe(usbdev, 0x82),
+			r->buf,
+			RX_BUF_SIZE,
+			gdm_usb_rcv_complete,
+			r);
+
+	return usb_submit_urb(r->urb, GFP_ATOMIC);
+}
+
+#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
+static void do_pm_control(struct work_struct *work)
+{
+	struct usbwm_dev *udev = container_of(work, struct usbwm_dev, pm_ws);
+	struct tx_cxt *tx = &udev->tx;
+	int ret;
+	unsigned long flags;
+
+	ret = usb_autopm_get_interface(udev->intf);
+	if (!ret)
+		usb_autopm_put_interface(udev->intf);
+
+	spin_lock_irqsave(&tx->lock, flags);
+	if (!(udev->usbdev->state & USB_STATE_SUSPENDED)
+		&& (!list_empty(&tx->hci_list) || !list_empty(&tx->sdu_list))) {
+		struct usb_tx *t, *temp;
+
+		list_for_each_entry_safe(t, temp, &tx->pending_list, p_list) {
+			list_del(&t->p_list);
+			ret =  usb_submit_urb(t->urb, GFP_ATOMIC);
+
+			if (ret) {
+				t->callback = NULL;
+				gdm_usb_send_complete(t->urb);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&tx->lock, flags);
+}
+#endif /* CONFIG_WIMAX_GDM72XX_USB_PM */
+
+static int gdm_usb_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	int ret = 0;
+	u8 bConfigurationValue;
+	struct phy_dev *phy_dev = NULL;
+	struct usbwm_dev *udev = NULL;
+	u16 idVendor, idProduct, bcdDevice;
+
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+
+	usb_get_dev(usbdev);
+	bConfigurationValue = usbdev->actconfig->desc.bConfigurationValue;
+
+	/*USB description is set up with Little-Endian*/
+	idVendor = L2H(usbdev->descriptor.idVendor);
+	idProduct = L2H(usbdev->descriptor.idProduct);
+	bcdDevice = L2H(usbdev->descriptor.bcdDevice);
+
+	printk(KERN_INFO "Found GDM USB VID = 0x%04x PID = 0x%04x...\n",
+		idVendor, idProduct);
+	printk(KERN_INFO "GCT WiMax driver version %s\n", DRIVER_VERSION);
+
+
+	if (idProduct == EMERGENCY_PID) {
+		ret = usb_emergency(usbdev);
+		goto out;
+	}
+
+	/* Support for EEPROM bootloader */
+	if (bConfigurationValue == DOWNLOAD_CONF_VALUE ||
+		idProduct & B_DOWNLOAD) {
+		ret = usb_boot(usbdev, bcdDevice);
+		goto out;
+	}
+
+	phy_dev = kmalloc(sizeof(*phy_dev), GFP_KERNEL);
+	if (phy_dev == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	udev = kmalloc(sizeof(*udev), GFP_KERNEL);
+	if (udev == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memset(phy_dev, 0, sizeof(*phy_dev));
+	memset(udev, 0, sizeof(*udev));
+
+	if (idProduct == 0x7205 || idProduct == 0x7206)
+		udev->padding = GDM7205_PADDING;
+	else
+		udev->padding = 0;
+
+	phy_dev->priv_dev = (void *)udev;
+	phy_dev->send_func = gdm_usb_send;
+	phy_dev->rcv_func = gdm_usb_receive;
+
+	ret = init_usb(udev);
+	if (ret < 0)
+		goto out;
+
+	udev->usbdev = usbdev;
+
+#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
+	udev->intf = intf;
+
+	intf->needs_remote_wakeup = 1;
+	device_init_wakeup(&intf->dev, 1);
+
+	pm_runtime_set_autosuspend_delay(&usbdev->dev, 10 * 1000); /* msec */
+
+	INIT_WORK(&udev->pm_ws, do_pm_control);
+#endif /* CONFIG_WIMAX_GDM72XX_USB_PM */
+
+	ret = register_wimax_device(phy_dev, &intf->dev);
+
+out:
+	if (ret) {
+		kfree(phy_dev);
+		kfree(udev);
+	}
+	usb_set_intfdata(intf, phy_dev);
+	return ret;
+}
+
+static void gdm_usb_disconnect(struct usb_interface *intf)
+{
+	u8 bConfigurationValue;
+	struct phy_dev *phy_dev;
+	struct usbwm_dev *udev;
+	u16 idProduct;
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+
+	bConfigurationValue = usbdev->actconfig->desc.bConfigurationValue;
+	phy_dev = usb_get_intfdata(intf);
+
+	/*USB description is set up with Little-Endian*/
+	idProduct = L2H(usbdev->descriptor.idProduct);
+
+	if (idProduct != EMERGENCY_PID &&
+			bConfigurationValue != DOWNLOAD_CONF_VALUE &&
+			(idProduct & B_DOWNLOAD) == 0) {
+		udev = phy_dev->priv_dev;
+		udev->usbdev = NULL;
+
+		unregister_wimax_device(phy_dev);
+		release_usb(udev);
+		kfree(udev);
+		kfree(phy_dev);
+	}
+
+	usb_put_dev(usbdev);
+}
+
+#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
+static int gdm_suspend(struct usb_interface *intf, pm_message_t pm_msg)
+{
+	struct phy_dev *phy_dev;
+	struct usbwm_dev *udev;
+	struct rx_cxt *rx;
+	struct usb_rx *r;
+
+	phy_dev = usb_get_intfdata(intf);
+	udev = phy_dev->priv_dev;
+	rx = &udev->rx;
+
+	list_for_each_entry(r, &rx->used_list, list)
+		usb_unlink_urb(r->urb);
+
+	return 0;
+}
+
+static int gdm_resume(struct usb_interface *intf)
+{
+	struct phy_dev *phy_dev;
+	struct usbwm_dev *udev;
+	struct rx_cxt *rx;
+	struct usb_rx *r;
+
+	phy_dev = usb_get_intfdata(intf);
+	udev = phy_dev->priv_dev;
+	rx = &udev->rx;
+
+	list_for_each_entry(r, &rx->used_list, list)
+		usb_submit_urb(r->urb, GFP_ATOMIC);
+
+	return 0;
+}
+
+#endif /* CONFIG_WIMAX_GDM72XX_USB_PM */
+
+#ifdef CONFIG_WIMAX_GDM72XX_K_MODE
+static int k_mode_thread(void *arg)
+{
+	struct usbwm_dev *udev;
+	struct tx_cxt *tx;
+	struct rx_cxt *rx;
+	struct usb_tx *t, *temp;
+	struct usb_rx *r;
+	unsigned long flags, flags2, expire;
+	int ret;
+
+	daemonize("k_mode_wimax");
+
+	while (!k_mode_stop) {
+
+		spin_lock_irqsave(&k_lock, flags2);
+		while (!list_empty(&k_list)) {
+
+			udev = list_entry(k_list.next, struct usbwm_dev, list);
+			tx = &udev->tx;
+			rx = &udev->rx;
+
+			list_del(&udev->list);
+			spin_unlock_irqrestore(&k_lock, flags2);
+
+			expire = jiffies + K_WAIT_TIME;
+			while (jiffies < expire)
+				schedule_timeout(K_WAIT_TIME);
+
+			list_for_each_entry(r, &rx->used_list, list)
+				usb_submit_urb(r->urb, GFP_ATOMIC);
+
+			spin_lock_irqsave(&tx->lock, flags);
+
+			list_for_each_entry_safe(t, temp, &tx->pending_list,
+						p_list) {
+				list_del(&t->p_list);
+				ret = usb_submit_urb(t->urb, GFP_ATOMIC);
+
+				if (ret) {
+					t->callback = NULL;
+					gdm_usb_send_complete(t->urb);
+				}
+			}
+
+			udev->bw_switch = 0;
+			spin_unlock_irqrestore(&tx->lock, flags);
+
+			spin_lock_irqsave(&k_lock, flags2);
+		}
+		spin_unlock_irqrestore(&k_lock, flags2);
+
+		interruptible_sleep_on(&k_wait);
+	}
+	return 0;
+}
+#endif /* CONFIG_WIMAX_GDM72XX_K_MODE */
+
+static struct usb_driver gdm_usb_driver = {
+	.name = "gdm_wimax",
+	.probe = gdm_usb_probe,
+	.disconnect = gdm_usb_disconnect,
+	.id_table = id_table,
+#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
+	.supports_autosuspend = 1,
+	.suspend = gdm_suspend,
+	.resume = gdm_resume,
+	.reset_resume = gdm_resume,
+#endif
+};
+
+static int __init usb_gdm_wimax_init(void)
+{
+#ifdef CONFIG_WIMAX_GDM72XX_K_MODE
+	kernel_thread(k_mode_thread, NULL, CLONE_KERNEL);
+#endif /* CONFIG_WIMAX_GDM72XX_K_MODE */
+	return usb_register(&gdm_usb_driver);
+}
+
+static void __exit usb_gdm_wimax_exit(void)
+{
+#ifdef CONFIG_WIMAX_GDM72XX_K_MODE
+	k_mode_stop = 1;
+	wake_up(&k_wait);
+#endif
+	usb_deregister(&gdm_usb_driver);
+}
+
+module_init(usb_gdm_wimax_init);
+module_exit(usb_gdm_wimax_exit);
+
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_DESCRIPTION("GCT WiMax Device Driver");
+MODULE_AUTHOR("Ethan Park");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/gdm72xx/gdm_usb.h b/drivers/staging/gdm72xx/gdm_usb.h
new file mode 100644
index 000000000000..ecb891f6a599
--- /dev/null
+++ b/drivers/staging/gdm72xx/gdm_usb.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __GDM_USB_H__
+#define __GDM_USB_H__
+
+#include <linux/types.h>
+#include <linux/usb.h>
+#include <linux/list.h>
+
+#define B_DIFF_DL_DRV		(1<<4)
+#define B_DOWNLOAD			(1 << 5)
+#define MAX_NR_SDU_BUF		64
+
+struct usb_tx {
+	struct list_head	list;
+#if defined(CONFIG_WIMAX_GDM72XX_USB_PM) || defined(CONFIG_WIMAX_GDM72XX_K_MODE)
+	struct list_head	p_list;
+#endif
+	struct tx_cxt		*tx_cxt;
+
+	struct urb	*urb;
+	u8			*buf;
+
+	void (*callback)(void *cb_data);
+	void *cb_data;
+};
+
+struct tx_cxt {
+	struct list_head	free_list;
+	struct list_head	sdu_list;
+	struct list_head	hci_list;
+#if defined(CONFIG_WIMAX_GDM72XX_USB_PM) || defined(CONFIG_WIMAX_GDM72XX_K_MODE)
+	struct list_head	pending_list;
+#endif
+
+	spinlock_t			lock;
+};
+
+struct usb_rx {
+	struct list_head	list;
+	struct rx_cxt		*rx_cxt;
+
+	struct urb	*urb;
+	u8			*buf;
+
+	void (*callback)(void *cb_data, void *data, int len);
+	void *cb_data;
+};
+
+struct rx_cxt {
+	struct list_head	free_list;
+	struct list_head	used_list;
+	spinlock_t			lock;
+};
+
+struct usbwm_dev {
+	struct usb_device	*usbdev;
+#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
+	struct work_struct	pm_ws;
+
+	struct usb_interface	*intf;
+#endif
+#ifdef CONFIG_WIMAX_GDM72XX_K_MODE
+	int bw_switch;
+	struct list_head	list;
+#endif
+
+	struct tx_cxt	tx;
+	struct rx_cxt	rx;
+
+	int padding;
+};
+
+#endif /* __GDM_USB_H__ */
diff --git a/drivers/staging/gdm72xx/gdm_wimax.c b/drivers/staging/gdm72xx/gdm_wimax.c
new file mode 100644
index 000000000000..f1936b92533b
--- /dev/null
+++ b/drivers/staging/gdm72xx/gdm_wimax.c
@@ -0,0 +1,1026 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/version.h>
+#include <linux/etherdevice.h>
+#include <asm/byteorder.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/udp.h>
+#include <linux/in.h>
+
+#include "gdm_wimax.h"
+#include "hci.h"
+#include "wm_ioctl.h"
+#include "netlink_k.h"
+
+#define gdm_wimax_send(n, d, l)	\
+	(n->phy_dev->send_func)(n->phy_dev->priv_dev, d, l, NULL, NULL)
+#define gdm_wimax_send_with_cb(n, d, l, c, b)	\
+	(n->phy_dev->send_func)(n->phy_dev->priv_dev, d, l, c, b)
+#define gdm_wimax_rcv_with_cb(n, c, b)	\
+	(n->phy_dev->rcv_func)(n->phy_dev->priv_dev, c, b)
+
+#define EVT_MAX_SIZE	2048
+
+struct evt_entry {
+	struct list_head list;
+	struct net_device *dev;
+	char evt_data[EVT_MAX_SIZE];
+	int	 size;
+};
+
+static void __gdm_wimax_event_send(struct work_struct *work);
+static inline struct evt_entry *alloc_event_entry(void);
+static inline void free_event_entry(struct evt_entry *e);
+static struct evt_entry *get_event_entry(void);
+static void put_event_entry(struct evt_entry *e);
+
+static struct {
+	int ref_cnt;
+	struct sock *sock;
+	struct list_head evtq;
+	spinlock_t evt_lock;
+
+	struct list_head freeq;
+	struct work_struct ws;
+} wm_event;
+
+static u8 gdm_wimax_macaddr[6] = {0x00, 0x0a, 0x3b, 0xf0, 0x01, 0x30};
+
+static void gdm_wimax_ind_fsm_update(struct net_device *dev, struct fsm_s *fsm);
+static void gdm_wimax_ind_if_updown(struct net_device *dev, int if_up);
+
+#if defined(DEBUG_SDU)
+static void printk_hex(u8 *buf, u32 size)
+{
+	int i;
+
+	for (i = 0; i < size; i++) {
+		if (i && i % 16 == 0)
+			printk(KERN_DEBUG "\n%02x ", *buf++);
+		else
+			printk(KERN_DEBUG "%02x ", *buf++);
+	}
+
+	printk(KERN_DEBUG "\n");
+}
+
+static const char *get_protocol_name(u16 protocol)
+{
+	static char buf[32];
+	const char *name = "-";
+
+	switch (protocol) {
+	case ETH_P_ARP:
+		name = "ARP";
+		break;
+	case ETH_P_IP:
+		name = "IP";
+		break;
+	case ETH_P_IPV6:
+		name = "IPv6";
+		break;
+	}
+
+	sprintf(buf, "0x%04x(%s)", protocol, name);
+	return buf;
+}
+
+static const char *get_ip_protocol_name(u8 ip_protocol)
+{
+	static char buf[32];
+	const char *name = "-";
+
+	switch (ip_protocol) {
+	case IPPROTO_TCP:
+		name = "TCP";
+		break;
+	case IPPROTO_UDP:
+		name = "UDP";
+		break;
+	case IPPROTO_ICMP:
+		name = "ICMP";
+		break;
+	}
+
+	sprintf(buf, "%u(%s)", ip_protocol, name);
+	return buf;
+}
+
+static const char *get_port_name(u16 port)
+{
+	static char buf[32];
+	const char *name = "-";
+
+	switch (port) {
+	case 67:
+		name = "DHCP-Server";
+		break;
+	case 68:
+		name = "DHCP-Client";
+		break;
+	case 69:
+		name = "TFTP";
+		break;
+	}
+
+	sprintf(buf, "%u(%s)", port, name);
+	return buf;
+}
+
+static void dump_eth_packet(const char *title, u8 *data, int len)
+{
+	struct iphdr *ih = NULL;
+	struct udphdr *uh = NULL;
+	u16 protocol = 0;
+	u8 ip_protocol = 0;
+	u16 port = 0;
+
+	protocol = (data[12]<<8) | data[13];
+	ih = (struct iphdr *) (data+ETH_HLEN);
+
+	if (protocol == ETH_P_IP) {
+		uh = (struct udphdr *) ((char *)ih + sizeof(struct iphdr));
+		ip_protocol = ih->protocol;
+		port = ntohs(uh->dest);
+	} else if (protocol == ETH_P_IPV6) {
+		struct ipv6hdr *i6h = (struct ipv6hdr *) data;
+		uh = (struct udphdr *) ((char *)i6h + sizeof(struct ipv6hdr));
+		ip_protocol = i6h->nexthdr;
+		port = ntohs(uh->dest);
+	}
+
+	printk(KERN_DEBUG "[%s] len=%d, %s, %s, %s\n",
+		title, len,
+		get_protocol_name(protocol),
+		get_ip_protocol_name(ip_protocol),
+		get_port_name(port));
+
+	#if 1
+	if (!(data[0] == 0xff && data[1] == 0xff)) {
+		if (protocol == ETH_P_IP) {
+			printk(KERN_DEBUG "     src=%u.%u.%u.%u\n",
+				NIPQUAD(ih->saddr));
+		} else if (protocol == ETH_P_IPV6) {
+			#ifdef NIP6
+			printk(KERN_DEBUG "     src=%x:%x:%x:%x:%x:%x:%x:%x\n",
+				NIP6(ih->saddr));
+			#else
+			printk(KERN_DEBUG "     src=%pI6\n", &ih->saddr);
+			#endif
+		}
+	}
+	#endif
+
+	#if (DUMP_PACKET & DUMP_SDU_ALL)
+	printk_hex(data, len);
+	#else
+		#if (DUMP_PACKET & DUMP_SDU_ARP)
+		if (protocol == ETH_P_ARP)
+			printk_hex(data, len);
+		#endif
+		#if (DUMP_PACKET & DUMP_SDU_IP)
+		if (protocol == ETH_P_IP || protocol == ETH_P_IPV6)
+			printk_hex(data, len);
+		#else
+			#if (DUMP_PACKET & DUMP_SDU_IP_TCP)
+			if (ip_protocol == IPPROTO_TCP)
+				printk_hex(data, len);
+			#endif
+			#if (DUMP_PACKET & DUMP_SDU_IP_UDP)
+			if (ip_protocol == IPPROTO_UDP)
+				printk_hex(data, len);
+			#endif
+			#if (DUMP_PACKET & DUMP_SDU_IP_ICMP)
+			if (ip_protocol == IPPROTO_ICMP)
+				printk_hex(data, len);
+			#endif
+		#endif
+	#endif
+}
+#endif
+
+
+static inline int gdm_wimax_header(struct sk_buff **pskb)
+{
+	u16 buf[HCI_HEADER_SIZE / sizeof(u16)];
+	struct sk_buff *skb = *pskb;
+	int ret = 0;
+
+	if (unlikely(skb_headroom(skb) < HCI_HEADER_SIZE)) {
+		struct sk_buff *skb2;
+
+		skb2 = skb_realloc_headroom(skb, HCI_HEADER_SIZE);
+		if (skb2 == NULL)
+			return -ENOMEM;
+		if (skb->sk)
+			skb_set_owner_w(skb2, skb->sk);
+		kfree_skb(skb);
+		skb = skb2;
+	}
+
+	skb_push(skb, HCI_HEADER_SIZE);
+	buf[0] = H2B(WIMAX_TX_SDU);
+	buf[1] = H2B(skb->len - HCI_HEADER_SIZE);
+	memcpy(skb->data, buf, HCI_HEADER_SIZE);
+
+	*pskb = skb;
+	return ret;
+}
+
+static void gdm_wimax_event_rcv(struct net_device *dev, u16 type, void *msg,
+				int len)
+{
+	struct nic *nic = netdev_priv(dev);
+
+	#if defined(DEBUG_HCI)
+	u8 *buf = (u8 *) msg;
+	u16 hci_cmd =  (buf[0]<<8) | buf[1];
+	u16 hci_len = (buf[2]<<8) | buf[3];
+	printk(KERN_DEBUG "H=>D: 0x%04x(%d)\n", hci_cmd, hci_len);
+	#endif
+
+	gdm_wimax_send(nic, msg, len);
+}
+
+static int gdm_wimax_event_init(void)
+{
+	if (wm_event.ref_cnt == 0) {
+		wm_event.sock = netlink_init(NETLINK_WIMAX,
+						gdm_wimax_event_rcv);
+		INIT_LIST_HEAD(&wm_event.evtq);
+		INIT_LIST_HEAD(&wm_event.freeq);
+		INIT_WORK(&wm_event.ws, __gdm_wimax_event_send);
+		spin_lock_init(&wm_event.evt_lock);
+	}
+
+	if (wm_event.sock) {
+		wm_event.ref_cnt++;
+		return 0;
+	}
+
+	printk(KERN_ERR "Creating WiMax Event netlink is failed\n");
+	return -1;
+}
+
+static void gdm_wimax_event_exit(void)
+{
+	if (wm_event.sock && --wm_event.ref_cnt == 0) {
+		struct evt_entry *e, *temp;
+		unsigned long flags;
+
+		spin_lock_irqsave(&wm_event.evt_lock, flags);
+
+		list_for_each_entry_safe(e, temp, &wm_event.evtq, list) {
+			list_del(&e->list);
+			free_event_entry(e);
+		}
+		list_for_each_entry_safe(e, temp, &wm_event.freeq, list) {
+			list_del(&e->list);
+			free_event_entry(e);
+		}
+
+		spin_unlock_irqrestore(&wm_event.evt_lock, flags);
+		netlink_exit(wm_event.sock);
+		wm_event.sock = NULL;
+	}
+}
+
+static inline struct evt_entry *alloc_event_entry(void)
+{
+	return kmalloc(sizeof(struct evt_entry), GFP_ATOMIC);
+}
+
+static inline void free_event_entry(struct evt_entry *e)
+{
+	kfree(e);
+}
+
+static struct evt_entry *get_event_entry(void)
+{
+	struct evt_entry *e;
+
+	if (list_empty(&wm_event.freeq))
+		e = alloc_event_entry();
+	else {
+		e = list_entry(wm_event.freeq.next, struct evt_entry, list);
+		list_del(&e->list);
+	}
+
+	return e;
+}
+
+static void put_event_entry(struct evt_entry *e)
+{
+	BUG_ON(!e);
+
+	list_add_tail(&e->list, &wm_event.freeq);
+}
+
+static void __gdm_wimax_event_send(struct work_struct *work)
+{
+	int idx;
+	unsigned long flags;
+	struct evt_entry *e;
+
+	spin_lock_irqsave(&wm_event.evt_lock, flags);
+
+	while (!list_empty(&wm_event.evtq)) {
+		e = list_entry(wm_event.evtq.next, struct evt_entry, list);
+		spin_unlock_irqrestore(&wm_event.evt_lock, flags);
+
+		sscanf(e->dev->name, "wm%d", &idx);
+		netlink_send(wm_event.sock, idx, 0, e->evt_data, e->size);
+
+		spin_lock_irqsave(&wm_event.evt_lock, flags);
+		list_del(&e->list);
+		put_event_entry(e);
+	}
+
+	spin_unlock_irqrestore(&wm_event.evt_lock, flags);
+}
+
+static int gdm_wimax_event_send(struct net_device *dev, char *buf, int size)
+{
+	struct evt_entry *e;
+	unsigned long flags;
+
+	#if defined(DEBUG_HCI)
+	u16 hci_cmd =  ((u8)buf[0]<<8) | (u8)buf[1];
+	u16 hci_len = ((u8)buf[2]<<8) | (u8)buf[3];
+	printk(KERN_DEBUG "D=>H: 0x%04x(%d)\n", hci_cmd, hci_len);
+	#endif
+
+	spin_lock_irqsave(&wm_event.evt_lock, flags);
+
+	e = get_event_entry();
+	if (!e) {
+		printk(KERN_ERR "%s: No memory for event\n", __func__);
+		spin_unlock_irqrestore(&wm_event.evt_lock, flags);
+		return -ENOMEM;
+	}
+
+	e->dev = dev;
+	e->size = size;
+	memcpy(e->evt_data, buf, size);
+
+	list_add_tail(&e->list, &wm_event.evtq);
+	spin_unlock_irqrestore(&wm_event.evt_lock, flags);
+
+	schedule_work(&wm_event.ws);
+
+	return 0;
+}
+
+static void tx_complete(void *arg)
+{
+	struct nic *nic = arg;
+
+	if (netif_queue_stopped(nic->netdev))
+		netif_wake_queue(nic->netdev);
+}
+
+int gdm_wimax_send_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	int ret = 0;
+	struct nic *nic = netdev_priv(dev);
+
+	ret = gdm_wimax_send_with_cb(nic, skb->data, skb->len, tx_complete,
+					nic);
+	if (ret == -ENOSPC) {
+		netif_stop_queue(dev);
+		ret = 0;
+	}
+
+	if (ret) {
+		skb_pull(skb, HCI_HEADER_SIZE);
+		return ret;
+	}
+
+	nic->stats.tx_packets++;
+	nic->stats.tx_bytes += skb->len - HCI_HEADER_SIZE;
+	kfree_skb(skb);
+	return ret;
+}
+
+static int gdm_wimax_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	int ret = 0;
+	struct nic *nic = netdev_priv(dev);
+	struct fsm_s *fsm = (struct fsm_s *) nic->sdk_data[SIOC_DATA_FSM].buf;
+
+	#if defined(DEBUG_SDU)
+	dump_eth_packet("TX", skb->data, skb->len);
+	#endif
+
+	ret = gdm_wimax_header(&skb);
+	if (ret < 0) {
+		skb_pull(skb, HCI_HEADER_SIZE);
+		return ret;
+	}
+
+	#if !defined(LOOPBACK_TEST)
+	if (!fsm)
+		printk(KERN_ERR "ASSERTION ERROR: fsm is NULL!!\n");
+	else if (fsm->m_status != M_CONNECTED) {
+		printk(KERN_EMERG "ASSERTION ERROR: Device is NOT ready. status=%d\n",
+			fsm->m_status);
+		kfree_skb(skb);
+		return 0;
+	}
+	#endif
+
+#if defined(CONFIG_WIMAX_GDM72XX_QOS)
+	ret = gdm_qos_send_hci_pkt(skb, dev);
+#else
+	ret = gdm_wimax_send_tx(skb, dev);
+#endif
+	return ret;
+}
+
+static int gdm_wimax_set_config(struct net_device *dev, struct ifmap *map)
+{
+	if (dev->flags & IFF_UP)
+		return -EBUSY;
+
+	return 0;
+}
+
+static void __gdm_wimax_set_mac_addr(struct net_device *dev, char *mac_addr)
+{
+	u16 hci_pkt_buf[32 / sizeof(u16)];
+	u8 *pkt = (u8 *) &hci_pkt_buf[0];
+	struct nic *nic = netdev_priv(dev);
+
+	/* Since dev is registered as a ethernet device,
+	 * ether_setup has made dev->addr_len to be ETH_ALEN
+	 */
+	memcpy(dev->dev_addr, mac_addr, dev->addr_len);
+
+	/* Let lower layer know of this change by sending
+	 * SetInformation(MAC Address)
+	 */
+	hci_pkt_buf[0] = H2B(WIMAX_SET_INFO);	/* cmd_evt */
+	hci_pkt_buf[1] = H2B(8);			/* size */
+	pkt[4] = 0; /* T */
+	pkt[5] = 6; /* L */
+	memcpy(pkt + 6, mac_addr, dev->addr_len); /* V */
+
+	gdm_wimax_send(nic, pkt, HCI_HEADER_SIZE + 8);
+}
+
+/* A driver function */
+static int gdm_wimax_set_mac_addr(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	if (netif_running(dev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	__gdm_wimax_set_mac_addr(dev, addr->sa_data);
+
+	return 0;
+}
+
+static struct net_device_stats *gdm_wimax_stats(struct net_device *dev)
+{
+	struct nic *nic = netdev_priv(dev);
+
+	return &nic->stats;
+}
+
+static int gdm_wimax_open(struct net_device *dev)
+{
+	struct nic *nic = netdev_priv(dev);
+	struct fsm_s *fsm = (struct fsm_s *) nic->sdk_data[SIOC_DATA_FSM].buf;
+
+	netif_start_queue(dev);
+
+	if (fsm && fsm->m_status != M_INIT)
+		gdm_wimax_ind_if_updown(dev, 1);
+	return 0;
+}
+
+static int gdm_wimax_close(struct net_device *dev)
+{
+	struct nic *nic = netdev_priv(dev);
+	struct fsm_s *fsm = (struct fsm_s *) nic->sdk_data[SIOC_DATA_FSM].buf;
+
+	netif_stop_queue(dev);
+
+	if (fsm && fsm->m_status != M_INIT)
+		gdm_wimax_ind_if_updown(dev, 0);
+	return 0;
+}
+
+static void kdelete(void **buf)
+{
+	if (buf && *buf) {
+		kfree(*buf);
+		*buf = NULL;
+	}
+}
+
+static int gdm_wimax_ioctl_get_data(struct data_s *dst, struct data_s *src)
+{
+	int size;
+
+	size = dst->size < src->size ? dst->size : src->size;
+
+	dst->size = size;
+	if (src->size) {
+		if (!dst->buf)
+			return -EINVAL;
+		if (copy_to_user(dst->buf, src->buf, size))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+static int gdm_wimax_ioctl_set_data(struct data_s *dst, struct data_s *src)
+{
+	if (!src->size) {
+		dst->size = 0;
+		return 0;
+	}
+
+	if (!src->buf)
+		return -EINVAL;
+
+	if (!(dst->buf && dst->size == src->size)) {
+		kdelete(&dst->buf);
+		dst->buf = kmalloc(src->size, GFP_KERNEL);
+		if (dst->buf == NULL)
+			return -ENOMEM;
+	}
+
+	if (copy_from_user(dst->buf, src->buf, src->size)) {
+		kdelete(&dst->buf);
+		return -EFAULT;
+	}
+	dst->size = src->size;
+	return 0;
+}
+
+static void gdm_wimax_cleanup_ioctl(struct net_device *dev)
+{
+	struct nic *nic = netdev_priv(dev);
+	int i;
+
+	for (i = 0; i < SIOC_DATA_MAX; i++)
+		kdelete(&nic->sdk_data[i].buf);
+}
+
+static void gdm_update_fsm(struct net_device *dev, struct fsm_s *new_fsm)
+{
+	struct nic *nic = netdev_priv(dev);
+	struct fsm_s *cur_fsm =
+		(struct fsm_s *) nic->sdk_data[SIOC_DATA_FSM].buf;
+
+	if (!cur_fsm)
+		return;
+
+	if (cur_fsm->m_status != new_fsm->m_status ||
+		cur_fsm->c_status != new_fsm->c_status) {
+		if (new_fsm->m_status == M_CONNECTED)
+			netif_carrier_on(dev);
+		else if (cur_fsm->m_status == M_CONNECTED) {
+			netif_carrier_off(dev);
+			#if defined(CONFIG_WIMAX_GDM72XX_QOS)
+			gdm_qos_release_list(nic);
+			#endif
+		}
+		gdm_wimax_ind_fsm_update(dev, new_fsm);
+	}
+}
+
+static int gdm_wimax_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct wm_req_s *req = (struct wm_req_s *) ifr;
+	struct nic *nic = netdev_priv(dev);
+	int ret;
+
+	if (cmd != SIOCWMIOCTL)
+		return -EOPNOTSUPP;
+
+	switch (req->cmd) {
+	case SIOCG_DATA:
+	case SIOCS_DATA:
+		if (req->data_id >= SIOC_DATA_MAX) {
+			printk(KERN_ERR
+				"%s error: data-index(%d) is invalid!!\n",
+				__func__, req->data_id);
+			return -EOPNOTSUPP;
+		}
+		if (req->cmd == SIOCG_DATA) {
+			ret = gdm_wimax_ioctl_get_data(&req->data,
+						&nic->sdk_data[req->data_id]);
+			if (ret < 0)
+				return ret;
+		} else if (req->cmd == SIOCS_DATA) {
+			if (req->data_id == SIOC_DATA_FSM) {
+				/*NOTE: gdm_update_fsm should be called
+				before gdm_wimax_ioctl_set_data is called*/
+				gdm_update_fsm(dev,
+						(struct fsm_s *) req->data.buf);
+			}
+			ret = gdm_wimax_ioctl_set_data(
+				&nic->sdk_data[req->data_id], &req->data);
+			if (ret < 0)
+				return ret;
+		}
+		break;
+	default:
+		printk(KERN_ERR "%s: %x unknown ioctl\n", __func__, cmd);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static void gdm_wimax_prepare_device(struct net_device *dev)
+{
+	struct nic *nic = netdev_priv(dev);
+	u16 buf[32 / sizeof(u16)];
+	struct hci_s *hci = (struct hci_s *) buf;
+	u16 len = 0;
+	u32 val = 0;
+
+	#define BIT_MULTI_CS	0
+	#define BIT_WIMAX		1
+	#define BIT_QOS			2
+	#define BIT_AGGREGATION	3
+
+	/* GetInformation mac address */
+	len = 0;
+	hci->cmd_evt = H2B(WIMAX_GET_INFO);
+	hci->data[len++] = TLV_T(T_MAC_ADDRESS);
+	hci->length = H2B(len);
+	gdm_wimax_send(nic, hci, HCI_HEADER_SIZE+len);
+
+	val = (1<<BIT_WIMAX) | (1<<BIT_MULTI_CS);
+	#if defined(CONFIG_WIMAX_GDM72XX_QOS)
+	val |= (1<<BIT_QOS);
+	#endif
+	#if defined(CONFIG_WIMAX_GDM72XX_WIMAX2)
+	val |= (1<<BIT_AGGREGATION);
+	#endif
+
+	/* Set capability */
+	len = 0;
+	hci->cmd_evt = H2B(WIMAX_SET_INFO);
+	hci->data[len++] = TLV_T(T_CAPABILITY);
+	hci->data[len++] = TLV_L(T_CAPABILITY);
+	val = DH2B(val);
+	memcpy(&hci->data[len], &val, TLV_L(T_CAPABILITY));
+	len += TLV_L(T_CAPABILITY);
+	hci->length = H2B(len);
+	gdm_wimax_send(nic, hci, HCI_HEADER_SIZE+len);
+
+	printk(KERN_INFO "GDM WiMax Set CAPABILITY: 0x%08X\n", DB2H(val));
+}
+
+static int gdm_wimax_hci_get_tlv(u8 *buf, u8 *T, u16 *L, u8 **V)
+{
+	#define __U82U16(b) ((u16)((u8 *)(b))[0] | ((u16)((u8 *)(b))[1] << 8))
+	int next_pos;
+
+	*T = buf[0];
+	if (buf[1] == 0x82) {
+		*L = B2H(__U82U16(&buf[2]));
+		next_pos = 1/*type*/+3/*len*/;
+	} else {
+		*L = buf[1];
+		next_pos = 1/*type*/+1/*len*/;
+	}
+	*V = &buf[next_pos];
+
+	next_pos += *L/*length of val*/;
+	return next_pos;
+}
+
+static int gdm_wimax_get_prepared_info(struct net_device *dev, char *buf,
+					int len)
+{
+	u8 T, *V;
+	u16 L;
+	u16 cmd_evt, cmd_len;
+	int pos = HCI_HEADER_SIZE;
+
+	cmd_evt = B2H(*(u16 *)&buf[0]);
+	cmd_len = B2H(*(u16 *)&buf[2]);
+
+	if (len < cmd_len + HCI_HEADER_SIZE) {
+		printk(KERN_ERR "%s: invalid length [%d/%d]\n", __func__,
+			cmd_len + HCI_HEADER_SIZE, len);
+		return -1;
+	}
+
+	if (cmd_evt == WIMAX_GET_INFO_RESULT) {
+		if (cmd_len < 2) {
+			printk(KERN_ERR "%s: len is too short [%x/%d]\n",
+				__func__, cmd_evt, len);
+			return -1;
+		}
+
+		pos += gdm_wimax_hci_get_tlv(&buf[pos], &T, &L, &V);
+		if (T == TLV_T(T_MAC_ADDRESS)) {
+			if (L != dev->addr_len) {
+				printk(KERN_ERR
+					"%s Invalid inofrmation result T/L "
+					"[%x/%d]\n", __func__, T, L);
+				return -1;
+			}
+			printk(KERN_INFO
+				"MAC change [%02x:%02x:%02x:%02x:%02x:%02x]"
+				"->[%02x:%02x:%02x:%02x:%02x:%02x]\n",
+				dev->dev_addr[0], dev->dev_addr[1],
+				dev->dev_addr[2], dev->dev_addr[3],
+				dev->dev_addr[4], dev->dev_addr[5],
+				V[0], V[1], V[2], V[3], V[4], V[5]);
+			memcpy(dev->dev_addr, V, dev->addr_len);
+			return 1;
+		}
+	}
+
+	gdm_wimax_event_send(dev, buf, len);
+	return 0;
+}
+
+static void gdm_wimax_netif_rx(struct net_device *dev, char *buf, int len)
+{
+	struct nic *nic = netdev_priv(dev);
+	struct sk_buff *skb;
+	int ret;
+
+	#if defined(DEBUG_SDU)
+	dump_eth_packet("RX", buf, len);
+	#endif
+
+	skb = dev_alloc_skb(len + 2);
+	if (!skb) {
+		printk(KERN_ERR "%s: dev_alloc_skb failed!\n", __func__);
+		return;
+	}
+	skb_reserve(skb, 2);
+
+	nic->stats.rx_packets++;
+	nic->stats.rx_bytes += len;
+
+	memcpy(skb_put(skb, len), buf, len);
+
+	skb->dev = dev;
+	skb->protocol = eth_type_trans(skb, dev); /* what will happen? */
+
+	ret = in_interrupt() ? netif_rx(skb) : netif_rx_ni(skb);
+	if (ret == NET_RX_DROP)
+		printk(KERN_ERR "%s skb dropped\n", __func__);
+}
+
+static void gdm_wimax_transmit_aggr_pkt(struct net_device *dev, char *buf,
+					int len)
+{
+	#define HCI_PADDING_BYTE	4
+	#define HCI_RESERVED_BYTE	4
+	struct hci_s *hci;
+	int length;
+
+	while (len > 0) {
+		hci = (struct hci_s *) buf;
+
+		if (B2H(hci->cmd_evt) != WIMAX_RX_SDU) {
+			printk(KERN_ERR "Wrong cmd_evt(0x%04X)\n",
+				B2H(hci->cmd_evt));
+			break;
+		}
+
+		length = B2H(hci->length);
+		gdm_wimax_netif_rx(dev, hci->data, length);
+
+		if (length & 0x3) {
+			/* Add padding size */
+			length += HCI_PADDING_BYTE - (length & 0x3);
+		}
+
+		length += HCI_HEADER_SIZE + HCI_RESERVED_BYTE;
+		len -= length;
+		buf += length;
+	}
+}
+
+static void gdm_wimax_transmit_pkt(struct net_device *dev, char *buf, int len)
+{
+	#if defined(CONFIG_WIMAX_GDM72XX_QOS)
+	struct nic *nic = netdev_priv(dev);
+	#endif
+	u16 cmd_evt, cmd_len;
+
+	/* This code is added for certain rx packet to be ignored. */
+	if (len == 0)
+		return;
+
+	cmd_evt = B2H(*(u16 *)&buf[0]);
+	cmd_len = B2H(*(u16 *)&buf[2]);
+
+	if (len < cmd_len + HCI_HEADER_SIZE) {
+		if (len)
+			printk(KERN_ERR "%s: invalid length [%d/%d]\n",
+				__func__, cmd_len + HCI_HEADER_SIZE, len);
+		return;
+	}
+
+	switch (cmd_evt) {
+	case WIMAX_RX_SDU_AGGR:
+		gdm_wimax_transmit_aggr_pkt(dev, &buf[HCI_HEADER_SIZE],
+						cmd_len);
+		break;
+	case WIMAX_RX_SDU:
+		gdm_wimax_netif_rx(dev, &buf[HCI_HEADER_SIZE], cmd_len);
+		break;
+	#if defined(CONFIG_WIMAX_GDM72XX_QOS)
+	case WIMAX_EVT_MODEM_REPORT:
+		gdm_recv_qos_hci_packet(nic, buf, len);
+		break;
+	#endif
+	case WIMAX_SDU_TX_FLOW:
+		if (buf[4] == 0) {
+			if (!netif_queue_stopped(dev))
+				netif_stop_queue(dev);
+		} else if (buf[4] == 1) {
+			if (netif_queue_stopped(dev))
+				netif_wake_queue(dev);
+		}
+		break;
+	default:
+		gdm_wimax_event_send(dev, buf, len);
+		break;
+	}
+}
+
+static void gdm_wimax_ind_fsm_update(struct net_device *dev, struct fsm_s *fsm)
+{
+	u16 buf[32 / sizeof(u16)];
+	u8 *hci_pkt_buf = (u8 *)&buf[0];
+
+	/* Indicate updating fsm */
+	buf[0] = H2B(WIMAX_FSM_UPDATE);
+	buf[1] = H2B(sizeof(struct fsm_s));
+	memcpy(&hci_pkt_buf[HCI_HEADER_SIZE], fsm, sizeof(struct fsm_s));
+
+	gdm_wimax_event_send(dev, hci_pkt_buf,
+				HCI_HEADER_SIZE + sizeof(struct fsm_s));
+}
+
+static void gdm_wimax_ind_if_updown(struct net_device *dev, int if_up)
+{
+	u16 buf[32 / sizeof(u16)];
+	struct hci_s *hci = (struct hci_s *) buf;
+	unsigned char up_down;
+
+	up_down = if_up ? WIMAX_IF_UP : WIMAX_IF_DOWN;
+
+	/* Indicate updating fsm */
+	hci->cmd_evt = H2B(WIMAX_IF_UPDOWN);
+	hci->length = H2B(sizeof(up_down));
+	hci->data[0] = up_down;
+
+	gdm_wimax_event_send(dev, (char *)hci, HCI_HEADER_SIZE+sizeof(up_down));
+}
+
+static void rx_complete(void *arg, void *data, int len)
+{
+	struct nic *nic = arg;
+
+	gdm_wimax_transmit_pkt(nic->netdev, data, len);
+	gdm_wimax_rcv_with_cb(nic, rx_complete, nic);
+}
+
+static void prepare_rx_complete(void *arg, void *data, int len)
+{
+	struct nic *nic = arg;
+	int ret;
+
+	ret = gdm_wimax_get_prepared_info(nic->netdev, data, len);
+	if (ret == 1)
+		gdm_wimax_rcv_with_cb(nic, rx_complete, nic);
+	else {
+		if (ret < 0)
+			printk(KERN_ERR "get_prepared_info failed(%d)\n", ret);
+		gdm_wimax_rcv_with_cb(nic, prepare_rx_complete, nic);
+		#if 0
+		/* Re-prepare WiMax device */
+		gdm_wimax_prepare_device(nic->netdev);
+		#endif
+	}
+}
+
+static void start_rx_proc(struct nic *nic)
+{
+	gdm_wimax_rcv_with_cb(nic, prepare_rx_complete, nic);
+}
+
+static struct net_device_ops gdm_netdev_ops = {
+	.ndo_open				= gdm_wimax_open,
+	.ndo_stop				= gdm_wimax_close,
+	.ndo_set_config			= gdm_wimax_set_config,
+	.ndo_start_xmit			= gdm_wimax_tx,
+	.ndo_get_stats			= gdm_wimax_stats,
+	.ndo_set_mac_address	= gdm_wimax_set_mac_addr,
+	.ndo_do_ioctl			= gdm_wimax_ioctl,
+};
+
+int register_wimax_device(struct phy_dev *phy_dev, struct device *pdev)
+{
+	struct nic *nic = NULL;
+	struct net_device *dev;
+	int ret;
+
+	dev = (struct net_device *)alloc_netdev(sizeof(*nic),
+						"wm%d", ether_setup);
+
+	if (dev == NULL) {
+		printk(KERN_ERR "alloc_etherdev failed\n");
+		return -ENOMEM;
+	}
+
+	SET_NETDEV_DEV(dev, pdev);
+	dev->mtu = 1400;
+	dev->netdev_ops = &gdm_netdev_ops;
+	dev->flags &= ~IFF_MULTICAST;
+	memcpy(dev->dev_addr, gdm_wimax_macaddr, sizeof(gdm_wimax_macaddr));
+
+	nic = netdev_priv(dev);
+	memset(nic, 0, sizeof(*nic));
+
+	nic->netdev = dev;
+	nic->phy_dev = phy_dev;
+	phy_dev->netdev = dev;
+
+	/* event socket init */
+	ret = gdm_wimax_event_init();
+	if (ret < 0) {
+		printk(KERN_ERR "Cannot create event.\n");
+		goto cleanup;
+	}
+
+	ret = register_netdev(dev);
+	if (ret)
+		goto cleanup;
+
+	#if defined(LOOPBACK_TEST)
+	netif_start_queue(dev);
+	netif_carrier_on(dev);
+	#else
+	netif_carrier_off(dev);
+	#endif
+
+#ifdef CONFIG_WIMAX_GDM72XX_QOS
+	gdm_qos_init(nic);
+#endif
+
+	start_rx_proc(nic);
+
+	/* Prepare WiMax device */
+	gdm_wimax_prepare_device(dev);
+
+	return 0;
+
+cleanup:
+	printk(KERN_ERR "register_netdev failed\n");
+	free_netdev(dev);
+	return ret;
+}
+
+void unregister_wimax_device(struct phy_dev *phy_dev)
+{
+	struct nic *nic = netdev_priv(phy_dev->netdev);
+	struct fsm_s *fsm = (struct fsm_s *) nic->sdk_data[SIOC_DATA_FSM].buf;
+
+	if (fsm)
+		fsm->m_status = M_INIT;
+	unregister_netdev(nic->netdev);
+
+	gdm_wimax_event_exit();
+
+#if defined(CONFIG_WIMAX_GDM72XX_QOS)
+	gdm_qos_release_list(nic);
+#endif
+
+	gdm_wimax_cleanup_ioctl(phy_dev->netdev);
+
+	free_netdev(nic->netdev);
+}
diff --git a/drivers/staging/gdm72xx/gdm_wimax.h b/drivers/staging/gdm72xx/gdm_wimax.h
new file mode 100644
index 000000000000..023e6492e33d
--- /dev/null
+++ b/drivers/staging/gdm72xx/gdm_wimax.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __GDM_WIMAX_H__
+#define __GDM_WIMAX_H__
+
+#include <linux/netdevice.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include "wm_ioctl.h"
+#if defined(CONFIG_WIMAX_GDM72XX_QOS)
+#include "gdm_qos.h"
+#endif
+
+#define DRIVER_VERSION		"3.2.3"
+
+/*#define ETH_P_IP	0x0800 */
+/*#define ETH_P_ARP	0x0806 */
+/*#define ETH_P_IPV6	0x86DD */
+
+#define H2L(x)		__cpu_to_le16(x)
+#define L2H(x)		__le16_to_cpu(x)
+#define DH2L(x)		__cpu_to_le32(x)
+#define DL2H(x)		__le32_to_cpu(x)
+
+#define H2B(x)		__cpu_to_be16(x)
+#define B2H(x)		__be16_to_cpu(x)
+#define DH2B(x)		__cpu_to_be32(x)
+#define DB2H(x)		__be32_to_cpu(x)
+
+struct phy_dev {
+	void	*priv_dev;
+	struct net_device	*netdev;
+
+	int	(*send_func)(void *priv_dev, void *data, int len,
+			void (*cb)(void *cb_data), void *cb_data);
+	int	(*rcv_func)(void *priv_dev,
+			void (*cb)(void *cb_data, void *data, int len),
+			void *cb_data);
+};
+
+struct nic {
+	struct net_device	*netdev;
+	struct phy_dev		*phy_dev;
+
+	struct net_device_stats	stats;
+
+	struct data_s	sdk_data[SIOC_DATA_MAX];
+
+#if defined(CONFIG_WIMAX_GDM72XX_QOS)
+	struct qos_cb_s	qos;
+#endif
+
+};
+
+
+#if 0
+#define dprintk(fmt, args ...)	printk(KERN_DEBUG " [GDM] " fmt, ## args)
+#else
+#define dprintk(...)
+#endif
+
+/*#define DEBUG_SDU */
+#if defined(DEBUG_SDU)
+#define DUMP_SDU_ALL		(1<<0)
+#define DUMP_SDU_ARP		(1<<1)
+#define DUMP_SDU_IP			(1<<2)
+#define DUMP_SDU_IP_TCP		(1<<8)
+#define DUMP_SDU_IP_UDP		(1<<9)
+#define DUMP_SDU_IP_ICMP	(1<<10)
+#define DUMP_PACKET			(DUMP_SDU_ALL)
+#endif
+
+/*#define DEBUG_HCI */
+
+/*#define LOOPBACK_TEST */
+
+extern int register_wimax_device(struct phy_dev *phy_dev, struct device *pdev);
+extern int gdm_wimax_send_tx(struct sk_buff *skb, struct net_device *dev);
+extern void unregister_wimax_device(struct phy_dev *phy_dev);
+
+#endif
diff --git a/drivers/staging/gdm72xx/hci.h b/drivers/staging/gdm72xx/hci.h
new file mode 100644
index 000000000000..0e0676622f1d
--- /dev/null
+++ b/drivers/staging/gdm72xx/hci.h
@@ -0,0 +1,218 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef HCI_H_20080801
+#define HCI_H_20080801
+
+#define HCI_HEADER_SIZE		4
+#define HCI_VALUE_OFFS		(HCI_HEADER_SIZE)
+#define HCI_MAX_PACKET		2048
+#define HCI_MAX_PARAM		(HCI_MAX_PACKET-HCI_HEADER_SIZE)
+#define HCI_MAX_TLV			32
+
+/* CMD-EVT */
+
+/* Category 0 */
+#define WIMAX_RESET				0x0000
+#define WIMAX_SET_INFO			0x0001
+#define WIMAX_GET_INFO			0x0002
+#define WIMAX_GET_INFO_RESULT	0x8003
+#define WIMAX_RADIO_OFF			0x0004
+#define WIMAX_RADIO_ON			0x0006
+#define WIMAX_WIMAX_RESET		0x0007	/* Is this still here */
+
+/* Category 1 */
+#define WIMAX_NET_ENTRY			0x0100
+#define WIMAX_NET_DISCONN		0x0102
+#define WIMAX_ENTER_SLEEP		0x0103
+#define WIMAX_EXIT_SLEEP		0x0104
+#define WIMAX_ENTER_IDLE		0x0105
+#define WIMAX_EXIT_IDLE			0x0106
+#define WIMAX_MODE_CHANGE		0x8108
+#define WIMAX_HANDOVER			0x8109	/* obsolete */
+
+#define WIMAX_SCAN				0x010d
+#define WIMAX_SCAN_COMPLETE		0x810e
+#define WIMAX_SCAN_RESULT		0x810f
+
+#define WIMAX_CONNECT			0x0110
+#define WIMAX_CONNECT_START		0x8111
+#define WIMAX_CONNECT_COMPLETE	0x8112
+#define WIMAX_ASSOC_START		0x8113
+#define WIMAX_ASSOC_COMPLETE	0x8114
+#define WIMAX_DISCONN_IND		0x8115
+#define WIMAX_ENTRY_IND			0x8116
+#define WIMAX_HO_START			0x8117
+#define WIMAX_HO_COMPLETE		0x8118
+#define WIMAX_RADIO_STATE_IND	0x8119
+#define WIMAX_IP_RENEW_IND		0x811a
+
+#define WIMAX_DISCOVER_NSP			0x011d
+#define WIMAX_DISCOVER_NSP_RESULT	0x811e
+
+#define WIMAX_SDU_TX_FLOW		0x8125
+
+/* Category 2 */
+#define WIMAX_TX_EAP		0x0200
+#define WIMAX_RX_EAP		0x8201
+#define WIMAX_TX_SDU		0x0202
+#define WIMAX_RX_SDU		0x8203
+#define WIMAX_RX_SDU_AGGR	0x8204
+#define WIMAX_TX_SDU_AGGR	0x0205
+
+/* Category 3 */
+#define WIMAX_DM_CMD				0x030a
+#define WIMAX_DM_RSP				0x830b
+
+#define WIMAX_CLI_CMD				0x030c
+#define WIMAX_CLI_RSP				0x830d
+
+#define WIMAX_DL_IMAGE				0x0310
+#define WIMAX_DL_IMAGE_STATUS		0x8311
+#define WIMAX_UL_IMAGE				0x0312
+#define WIMAX_UL_IMAGE_RESULT		0x8313
+#define WIMAX_UL_IMAGE_STATUS		0x0314
+
+#define WIMAX_EVT_MODEM_REPORT		0x8325
+
+/* Category 0xF */
+#define WIMAX_FSM_UPDATE			0x8F01
+#define WIMAX_IF_UPDOWN				0x8F02
+	#define WIMAX_IF_UP				1
+	#define WIMAX_IF_DOWN			2
+
+/* WIMAX mode */
+#define W_NULL				0
+#define W_STANDBY			1
+#define W_OOZ				2
+#define W_AWAKE				3
+#define W_IDLE				4
+#define W_SLEEP				5
+#define W_WAIT				6
+
+#define W_NET_ENTRY_RNG		0x80
+#define W_NET_ENTRY_SBC		0x81
+#define W_NET_ENTRY_PKM		0x82
+#define W_NET_ENTRY_REG		0x83
+#define W_NET_ENTRY_DSX		0x84
+
+#define W_NET_ENTRY_RNG_FAIL	0x1100100
+#define W_NET_ENTRY_SBC_FAIL	0x1100200
+#define W_NET_ENTRY_PKM_FAIL	0x1102000
+#define W_NET_ENTRY_REG_FAIL	0x1103000
+#define W_NET_ENTRY_DSX_FAIL	0x1104000
+
+/* Scan Type */
+#define W_SCAN_ALL_CHANNEL				0
+#define W_SCAN_ALL_SUBSCRIPTION			1
+#define W_SCAN_SPECIFIED_SUBSCRIPTION	2
+
+/*
+ * TLV
+ *
+ * [31:31] indicates the type is composite.
+ * [30:16] is the length of the type. 0 length means length is variable.
+ * [15:0] is the actual type.
+ *
+ */
+#define TLV_L(x)		(((x) >> 16) & 0xff)
+#define TLV_T(x)			((x) & 0xff)
+#define TLV_COMPOSITE(x)	((x) >> 31)
+
+/* GENERAL */
+#define T_MAC_ADDRESS			(0x00	| (6 << 16))
+#define T_BSID				(0x01	| (6 << 16))
+#define T_MSK				(0x02	| (64 << 16))
+#define T_RSSI_THRSHLD			(0x03	| (1 << 16))
+#define T_FREQUENCY			(0x04	| (4 << 16))
+#define T_CONN_CS_TYPE			(0x05	| (1 << 16))
+#define T_HOST_IP_VER			(0x06	| (1 << 16))
+#define T_STBY_SCAN_INTERVAL		(0x07	| (4  << 16))
+#define T_OOZ_SCAN_INTERVAL		(0x08	| (4 << 16))
+#define T_IMEI				(0x09	| (8 << 16))
+#define T_PID				(0x0a	| (12 << 16))
+
+#define T_CAPABILITY			(0x1a	| (4 << 16))
+#define T_RELEASE_NUMBER		(0x1b	| (4 << 16))
+#define T_DRIVER_REVISION		(0x1c	| (4 << 16))
+#define T_FW_REVISION			(0x1d	| (4 << 16))
+#define T_MAC_HW_REVISION		(0x1e	| (4 << 16))
+#define T_PHY_HW_REVISION		(0x1f	| (4 << 16))
+
+/* HANDOVER */
+#define T_SCAN_INTERVAL		(0x20	| (1 << 16))
+
+#define T_RSC_RETAIN_TIME		(0x2f	| (2 << 16))
+
+/* SLEEP */
+#define T_TYPE1_ISW			(0x40	| (1 << 16))
+
+#define T_SLP_START_TO			(0x4a	| (2 << 16))
+
+/* IDLE */
+#define T_IDLE_MODE_TO			(0x50	| (2 << 16))
+
+#define T_IDLE_START_TO		(0x54	| (2 << 16))
+
+/* MONITOR */
+#define T_RSSI				(0x60	| (1 << 16))
+#define T_CINR				(0x61	| (1 << 16))
+#define T_TX_POWER			(0x6a   | (1 << 16))
+#define T_CUR_FREQ			(0x7f	| (4 << 16))
+
+
+/* WIMAX */
+#define T_MAX_SUBSCRIPTION		(0xa1	| (1 << 16))
+#define T_MAX_SF			(0xa2	| (1 << 16))
+#define T_PHY_TYPE			(0xa3	| (1 << 16))
+#define T_PKM				(0xa4	| (1 << 16))
+#define T_AUTH_POLICY			(0xa5	| (1 << 16))
+#define T_CS_TYPE			(0xa6	| (2 << 16))
+#define T_VENDOR_NAME			(0xa7	| (0 << 16))
+#define T_MOD_NAME			(0xa8	| (0 << 16))
+#define T_PACKET_FILTER		(0xa9	| (1 << 16))
+#define T_NSP_CHANGE_COUNT		(0xaa	| (4 << 16))
+#define T_RADIO_STATE			(0xab	| (1 << 16))
+#define T_URI_CONTACT_TYPE		(0xac	| (1 << 16))
+#define T_URI_TEXT			(0xad	| (0 << 16))
+#define T_URI				(0xae	| (0 << 16))
+#define T_ENABLE_AUTH			(0xaf	| (1 << 16))
+#define T_TIMEOUT			(0xb0   | (2 << 16))
+#define T_RUN_MODE			(0xb1	| (1 << 16))
+#define T_OMADMT_VER			(0xb2	| (4 << 16))
+/* This is measured in seconds from 00:00:00 GMT January 1, 1970. */
+#define T_RTC_TIME			(0xb3	| (4 << 16))
+#define T_CERT_STATUS			(0xb4	| (4 << 16))
+#define T_CERT_MASK			(0xb5	| (4 << 16))
+#define T_EMSK				(0xb6	| (64 << 16))
+
+/* Subscription TLV */
+#define T_SUBSCRIPTION_LIST		(0xd1	| (0 << 16) | (1 << 31))
+#define T_H_NSPID			(0xd2	| (3 << 16))
+#define T_NSP_NAME			(0xd3	| (0 << 16))
+#define T_SUBSCRIPTION_NAME		(0xd4	| (0 << 16))
+#define T_SUBSCRIPTION_FLAG		(0xd5	| (2 << 16))
+#define T_V_NSPID			(0xd6	| (3 << 16))
+#define T_NAP_ID			(0xd7	| (3 << 16))
+#define T_PREAMBLES			(0xd8	| (15 << 16))
+#define T_BW				(0xd9	| (4 << 16))
+#define T_FFTSIZE			(0xda	| (4 << 16))
+#define T_DUPLEX_MODE			(0xdb	| (4 << 16))
+
+struct hci_s {
+	unsigned short cmd_evt;
+	unsigned short length;
+	unsigned char  data[0];
+} __packed;
+
+#endif
diff --git a/drivers/staging/gdm72xx/netlink_k.c b/drivers/staging/gdm72xx/netlink_k.c
new file mode 100644
index 000000000000..292af0f7f451
--- /dev/null
+++ b/drivers/staging/gdm72xx/netlink_k.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/netlink.h>
+#include <asm/byteorder.h>
+#include <net/sock.h>
+
+#if !defined(NLMSG_HDRLEN)
+#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
+#endif
+
+#define ND_MAX_GROUP			30
+#define ND_IFINDEX_LEN			sizeof(int)
+#define ND_NLMSG_SPACE(len)		(NLMSG_SPACE(len) + ND_IFINDEX_LEN)
+#define ND_NLMSG_DATA(nlh) \
+	((void *)((char *)NLMSG_DATA(nlh) + ND_IFINDEX_LEN))
+#define ND_NLMSG_S_LEN(len)		(len+ND_IFINDEX_LEN)
+#define ND_NLMSG_R_LEN(nlh)		(nlh->nlmsg_len-ND_IFINDEX_LEN)
+#define ND_NLMSG_IFIDX(nlh)		NLMSG_DATA(nlh)
+#define ND_MAX_MSG_LEN			8096
+
+#if defined(DEFINE_MUTEX)
+static DEFINE_MUTEX(netlink_mutex);
+#else
+static struct semaphore netlink_mutex;
+#define mutex_lock(x)		down(x)
+#define mutex_unlock(x)		up(x)
+#endif
+
+static void (*rcv_cb)(struct net_device *dev, u16 type, void *msg, int len);
+
+static void netlink_rcv_cb(struct sk_buff *skb)
+{
+	struct nlmsghdr *nlh;
+	struct net_device *dev;
+	u32 mlen;
+	void *msg;
+	int ifindex;
+
+	if (skb->len >= NLMSG_SPACE(0)) {
+		nlh = (struct nlmsghdr *)skb->data;
+
+		if (skb->len < nlh->nlmsg_len ||
+		nlh->nlmsg_len > ND_MAX_MSG_LEN) {
+			printk(KERN_ERR "Invalid length (%d,%d)\n", skb->len,
+				nlh->nlmsg_len);
+			return;
+		}
+
+		memcpy(&ifindex, ND_NLMSG_IFIDX(nlh), ND_IFINDEX_LEN);
+		msg = ND_NLMSG_DATA(nlh);
+		mlen = ND_NLMSG_R_LEN(nlh);
+
+		if (rcv_cb) {
+			dev = dev_get_by_index(&init_net, ifindex);
+			if (dev) {
+				rcv_cb(dev, nlh->nlmsg_type, msg, mlen);
+				dev_put(dev);
+			} else
+				printk(KERN_ERR "dev_get_by_index(%d) "
+					"is not found.\n", ifindex);
+		} else
+			printk(KERN_ERR "Unregistered Callback\n");
+	}
+}
+
+static void netlink_rcv(struct sk_buff *skb)
+{
+	mutex_lock(&netlink_mutex);
+	netlink_rcv_cb(skb);
+	mutex_unlock(&netlink_mutex);
+}
+
+struct sock *netlink_init(int unit, void (*cb)(struct net_device *dev, u16 type,
+						void *msg, int len))
+{
+	struct sock *sock;
+
+#if !defined(DEFINE_MUTEX)
+	init_MUTEX(&netlink_mutex);
+#endif
+
+	sock = netlink_kernel_create(&init_net, unit, 0, netlink_rcv, NULL,
+					THIS_MODULE);
+
+	if (sock)
+		rcv_cb = cb;
+
+	return sock;
+}
+
+void netlink_exit(struct sock *sock)
+{
+	sock_release(sock->sk_socket);
+}
+
+int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len)
+{
+	static u32 seq;
+	struct sk_buff *skb = NULL;
+	struct nlmsghdr *nlh;
+	int ret = 0;
+
+	if (group > ND_MAX_GROUP) {
+		printk(KERN_ERR "Group %d is invalied.\n", group);
+		printk(KERN_ERR "Valid group is 0 ~ %d.\n", ND_MAX_GROUP);
+		return -EINVAL;
+	}
+
+	skb = alloc_skb(NLMSG_SPACE(len), GFP_ATOMIC);
+	if (!skb) {
+		printk(KERN_ERR "netlink_broadcast ret=%d\n", ret);
+		return -ENOMEM;
+	}
+
+	seq++;
+	nlh = NLMSG_PUT(skb, 0, seq, type, len);
+	memcpy(NLMSG_DATA(nlh), msg, len);
+
+	NETLINK_CB(skb).pid = 0;
+	NETLINK_CB(skb).dst_group = 0;
+
+	ret = netlink_broadcast(sock, skb, 0, group+1, GFP_ATOMIC);
+
+	if (!ret)
+		return len;
+	else {
+		if (ret != -ESRCH) {
+			printk(KERN_ERR "netlink_broadcast g=%d, t=%d, l=%d, r=%d\n",
+				group, type, len, ret);
+		}
+		ret = 0;
+	}
+
+nlmsg_failure:
+	return ret;
+}
diff --git a/drivers/staging/gdm72xx/netlink_k.h b/drivers/staging/gdm72xx/netlink_k.h
new file mode 100644
index 000000000000..1dffaa6156e4
--- /dev/null
+++ b/drivers/staging/gdm72xx/netlink_k.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#if !defined(NETLINK_H_20081202)
+#define NETLINK_H_20081202
+#include <linux/netdevice.h>
+#include <net/sock.h>
+
+struct sock *netlink_init(int unit,
+	void (*cb)(struct net_device *dev, u16 type, void *msg, int len));
+void netlink_exit(struct sock *sock);
+int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len);
+
+#endif
diff --git a/drivers/staging/gdm72xx/sdio_boot.c b/drivers/staging/gdm72xx/sdio_boot.c
new file mode 100644
index 000000000000..6ff4dc372522
--- /dev/null
+++ b/drivers/staging/gdm72xx/sdio_boot.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "gdm_sdio.h"
+
+#define TYPE_A_HEADER_SIZE	4
+#define TYPE_A_LOOKAHEAD_SIZE   16
+#define YMEM0_SIZE			0x8000	/* 32kbytes */
+#define DOWNLOAD_SIZE		(YMEM0_SIZE - TYPE_A_HEADER_SIZE)
+
+#define KRN_PATH	"/lib/firmware/gdm72xx/gdmskrn.bin"
+#define RFS_PATH	"/lib/firmware/gdm72xx/gdmsrfs.bin"
+
+static u8 *tx_buf;
+
+static int ack_ready(struct sdio_func *func)
+{
+	unsigned long start = jiffies;
+	u8 val;
+	int ret;
+
+	while ((jiffies - start) < HZ) {
+		val = sdio_readb(func, 0x13, &ret);
+		if (val & 0x01)
+			return 1;
+		schedule();
+	}
+
+	return 0;
+}
+
+static int download_image(struct sdio_func *func, char *img_name)
+{
+	int ret = 0, len, size, pno;
+	struct file *filp = NULL;
+	struct inode *inode = NULL;
+	u8 *buf = tx_buf;
+	loff_t pos = 0;
+
+	filp = filp_open(img_name, O_RDONLY | O_LARGEFILE, 0);
+	if (IS_ERR(filp)) {
+		printk(KERN_ERR "Can't find %s.\n", img_name);
+		return -ENOENT;
+	}
+
+	if (filp->f_dentry)
+		inode = filp->f_dentry->d_inode;
+	if (!inode || !S_ISREG(inode->i_mode)) {
+		printk(KERN_ERR "Invalid file type: %s\n", img_name);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	size = i_size_read(inode->i_mapping->host);
+	if (size <= 0) {
+		printk(KERN_ERR "Unable to find file size: %s\n", img_name);
+		ret = size;
+		goto out;
+	}
+
+	pno = 0;
+	while ((len = filp->f_op->read(filp, buf + TYPE_A_HEADER_SIZE,
+					DOWNLOAD_SIZE, &pos))) {
+		if (len < 0) {
+			ret = -1;
+			goto out;
+		}
+
+		buf[0] = len & 0xff;
+		buf[1] = (len >> 8) & 0xff;
+		buf[2] = (len >> 16) & 0xff;
+
+		if (pos >= size)	/* The last packet */
+			buf[3] = 2;
+		else
+			buf[3] = 0;
+
+		ret = sdio_memcpy_toio(func, 0, buf, len + TYPE_A_HEADER_SIZE);
+		if (ret < 0) {
+			printk(KERN_ERR "gdmwm: send image error: "
+				"packet number = %d ret = %d\n", pno, ret);
+			goto out;
+		}
+		if (buf[3] == 2)	/* The last packet */
+			break;
+		if (!ack_ready(func)) {
+			ret = -EIO;
+			printk(KERN_ERR "gdmwm: Ack is not ready.\n");
+			goto out;
+		}
+		ret = sdio_memcpy_fromio(func, buf, 0, TYPE_A_LOOKAHEAD_SIZE);
+		if (ret < 0) {
+			printk(KERN_ERR "gdmwm: receive ack error: "
+				"packet number = %d ret = %d\n", pno, ret);
+			goto out;
+		}
+		sdio_writeb(func, 0x01, 0x13, &ret);
+		sdio_writeb(func, 0x00, 0x10, &ret);	/* PCRRT */
+
+		pno++;
+	}
+out:
+	filp_close(filp, current->files);
+	return ret;
+}
+
+int sdio_boot(struct sdio_func *func)
+{
+	static mm_segment_t fs;
+	int ret;
+
+	tx_buf = kmalloc(YMEM0_SIZE, GFP_KERNEL);
+	if (tx_buf == NULL) {
+		printk(KERN_ERR "Error: kmalloc: %s %d\n", __func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	fs = get_fs();
+	set_fs(get_ds());
+
+	ret = download_image(func, KRN_PATH);
+	if (ret)
+		goto restore_fs;
+	printk(KERN_INFO "GCT: Kernel download success.\n");
+
+	ret = download_image(func, RFS_PATH);
+	if (ret)
+		goto restore_fs;
+	printk(KERN_INFO "GCT: Filesystem download success.\n");
+
+restore_fs:
+	set_fs(fs);
+	kfree(tx_buf);
+	return ret;
+}
diff --git a/drivers/staging/gdm72xx/sdio_boot.h b/drivers/staging/gdm72xx/sdio_boot.h
new file mode 100644
index 000000000000..373ac28063c6
--- /dev/null
+++ b/drivers/staging/gdm72xx/sdio_boot.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SDIO_BOOT_H__
+#define __SDIO_BOOT_H__
+
+struct sdio_func;
+
+extern int sdio_boot(struct sdio_func *func);
+
+#endif /* __SDIO_BOOT_H__ */
diff --git a/drivers/staging/gdm72xx/usb_boot.c b/drivers/staging/gdm72xx/usb_boot.c
new file mode 100644
index 000000000000..5a0e030220dc
--- /dev/null
+++ b/drivers/staging/gdm72xx/usb_boot.c
@@ -0,0 +1,404 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/usb.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include "gdm_usb.h"
+#include "usb_boot.h"
+
+#define DN_KERNEL_MAGIC_NUMBER		0x10760001
+#define DN_ROOTFS_MAGIC_NUMBER		0x10760002
+
+#define DOWNLOAD_SIZE	1024
+
+#define DH2B(x)		__cpu_to_be32(x)
+#define DL2H(x)		__le32_to_cpu(x)
+
+#define MIN(a, b)	((a) > (b) ? (b) : (a))
+
+#define MAX_IMG_CNT		16
+#define UIMG_PATH		"/lib/firmware/gdm72xx/gdmuimg.bin"
+#define KERN_PATH		"/lib/firmware/gdm72xx/zImage"
+#define FS_PATH			"/lib/firmware/gdm72xx/ramdisk.jffs2"
+
+struct dn_header {
+	u32	magic_num;
+	u32	file_size;
+};
+
+struct img_header {
+	u32		magic_code;
+	u32		count;
+	u32		len;
+	u32		offset[MAX_IMG_CNT];
+	char	hostname[32];
+	char	date[32];
+};
+
+struct fw_info {
+	u32		id;
+	u32		len;
+	u32		kernel_len;
+	u32		rootfs_len;
+	u32		kernel_offset;
+	u32		rootfs_offset;
+	u32		fw_ver;
+	u32		mac_ver;
+	char	hostname[32];
+	char	userid[16];
+	char	date[32];
+	char	user_desc[128];
+};
+
+static void array_le32_to_cpu(u32 *arr, int num)
+{
+	int i;
+	for (i = 0; i < num; i++, arr++)
+		*arr = DL2H(*arr);
+}
+
+static u8 *tx_buf;
+
+static int gdm_wibro_send(struct usb_device *usbdev, void *data, int len)
+{
+	int ret;
+	int actual;
+
+	ret = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, 1), data, len,
+			&actual, 1000);
+
+	if (ret < 0) {
+		printk(KERN_ERR "Error : usb_bulk_msg ( result = %d )\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int gdm_wibro_recv(struct usb_device *usbdev, void *data, int len)
+{
+	int ret;
+	int actual;
+
+	ret = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, 2), data, len,
+			&actual, 5000);
+
+	if (ret < 0) {
+		printk(KERN_ERR "Error : usb_bulk_msg(recv) ( result = %d )\n",
+			ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int download_image(struct usb_device *usbdev, struct file *filp,
+				loff_t *pos, u32 img_len, u32 magic_num)
+{
+	struct dn_header h;
+	int ret = 0;
+	u32 size;
+	int len, readn;
+
+	size = (img_len + DOWNLOAD_SIZE - 1) & ~(DOWNLOAD_SIZE - 1);
+	h.magic_num = DH2B(magic_num);
+	h.file_size = DH2B(size);
+
+	ret = gdm_wibro_send(usbdev, &h, sizeof(h));
+	if (ret < 0)
+		goto out;
+
+	readn = 0;
+	while ((len = filp->f_op->read(filp, tx_buf, DOWNLOAD_SIZE, pos))) {
+
+		if (len < 0) {
+			ret = -1;
+			goto out;
+		}
+		readn += len;
+
+		ret = gdm_wibro_send(usbdev, tx_buf, DOWNLOAD_SIZE);
+		if (ret < 0)
+			goto out;
+		if (readn >= img_len)
+			break;
+	}
+
+	if (readn < img_len) {
+		printk(KERN_ERR "gdmwm: Cannot read to the requested size. "
+			"Read = %d Requested = %d\n", readn, img_len);
+		ret = -EIO;
+	}
+out:
+
+	return ret;
+}
+
+int usb_boot(struct usb_device *usbdev, u16 pid)
+{
+	int i, ret = 0;
+	struct file *filp = NULL;
+	struct inode *inode = NULL;
+	static mm_segment_t fs;
+	struct img_header hdr;
+	struct fw_info fw_info;
+	loff_t pos = 0;
+	char *img_name = UIMG_PATH;
+	int len;
+
+	tx_buf = kmalloc(DOWNLOAD_SIZE, GFP_KERNEL);
+	if (tx_buf == NULL) {
+		printk(KERN_ERR "Error: kmalloc\n");
+		return -ENOMEM;
+	}
+
+	fs = get_fs();
+	set_fs(get_ds());
+
+	filp = filp_open(img_name, O_RDONLY | O_LARGEFILE, 0);
+	if (IS_ERR(filp)) {
+		printk(KERN_ERR "Can't find %s.\n", img_name);
+		set_fs(fs);
+		ret = -ENOENT;
+		goto restore_fs;
+	}
+
+	if (filp->f_dentry)
+		inode = filp->f_dentry->d_inode;
+	if (!inode || !S_ISREG(inode->i_mode)) {
+		printk(KERN_ERR "Invalid file type: %s\n", img_name);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	len = filp->f_op->read(filp, (u8 *)&hdr, sizeof(hdr), &pos);
+	if (len != sizeof(hdr)) {
+		printk(KERN_ERR "gdmwm: Cannot read the image info.\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	array_le32_to_cpu((u32 *)&hdr, 19);
+#if 0
+	if (hdr.magic_code != 0x10767fff) {
+		printk(KERN_ERR "gdmwm: Invalid magic code 0x%08x\n",
+			hdr.magic_code);
+		ret = -EINVAL;
+		goto out;
+	}
+#endif
+	if (hdr.count > MAX_IMG_CNT) {
+		printk(KERN_ERR "gdmwm: Too many images. %d\n", hdr.count);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	for (i = 0; i < hdr.count; i++) {
+		if (hdr.offset[i] > hdr.len) {
+			printk(KERN_ERR "gdmwm: Invalid offset. "
+				"Entry = %d Offset = 0x%08x "
+				"Image length = 0x%08x\n",
+				i, hdr.offset[i], hdr.len);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		pos = hdr.offset[i];
+		len = filp->f_op->read(filp, (u8 *)&fw_info, sizeof(fw_info),
+					&pos);
+		if (len != sizeof(fw_info)) {
+			printk(KERN_ERR "gdmwm: Cannot read the FW info.\n");
+			ret = -EIO;
+			goto out;
+		}
+
+		array_le32_to_cpu((u32 *)&fw_info, 8);
+#if 0
+		if ((fw_info.id & 0xfffff000) != 0x10767000) {
+			printk(KERN_ERR "gdmwm: Invalid FW id. 0x%08x\n",
+				fw_info.id);
+			ret = -EIO;
+			goto out;
+		}
+#endif
+
+		if ((fw_info.id & 0xffff) != pid)
+			continue;
+
+		pos = hdr.offset[i] + fw_info.kernel_offset;
+		ret = download_image(usbdev, filp, &pos, fw_info.kernel_len,
+				DN_KERNEL_MAGIC_NUMBER);
+		if (ret < 0)
+			goto out;
+		printk(KERN_INFO "GCT: Kernel download success.\n");
+
+		pos = hdr.offset[i] + fw_info.rootfs_offset;
+		ret = download_image(usbdev, filp, &pos, fw_info.rootfs_len,
+				DN_ROOTFS_MAGIC_NUMBER);
+		if (ret < 0)
+			goto out;
+		printk(KERN_INFO "GCT: Filesystem download success.\n");
+
+		break;
+	}
+
+	if (i == hdr.count) {
+		printk(KERN_ERR "Firmware for gsk%x is not installed.\n", pid);
+		ret = -EINVAL;
+	}
+out:
+	filp_close(filp, current->files);
+
+restore_fs:
+	set_fs(fs);
+	kfree(tx_buf);
+	return ret;
+}
+
+/*#define GDM7205_PADDING		256 */
+#define DOWNLOAD_CHUCK			2048
+#define KERNEL_TYPE_STRING		"linux"
+#define FS_TYPE_STRING			"rootfs"
+
+static int em_wait_ack(struct usb_device *usbdev, int send_zlp)
+{
+	int ack;
+	int ret = -1;
+
+	if (send_zlp) {
+		/*Send ZLP*/
+		ret = gdm_wibro_send(usbdev, NULL, 0);
+		if (ret < 0)
+			goto out;
+	}
+
+	/*Wait for ACK*/
+	ret = gdm_wibro_recv(usbdev, &ack, sizeof(ack));
+	if (ret < 0)
+		goto out;
+out:
+	return ret;
+}
+
+static int em_download_image(struct usb_device *usbdev, char *path,
+				char *type_string)
+{
+	struct file *filp;
+	struct inode *inode;
+	static mm_segment_t fs;
+	char *buf = NULL;
+	loff_t pos = 0;
+	int ret = 0;
+	int len, readn = 0;
+	#if defined(GDM7205_PADDING)
+	const int pad_size = GDM7205_PADDING;
+	#else
+	const int pad_size = 0;
+	#endif
+
+	fs = get_fs();
+	set_fs(get_ds());
+
+	filp = filp_open(path, O_RDONLY | O_LARGEFILE, 0);
+	if (IS_ERR(filp)) {
+		printk(KERN_ERR "Can't find %s.\n", path);
+		set_fs(fs);
+		ret = -ENOENT;
+		goto restore_fs;
+	}
+
+	if (filp->f_dentry) {
+		inode = filp->f_dentry->d_inode;
+		if (!inode || !S_ISREG(inode->i_mode)) {
+			printk(KERN_ERR "Invalid file type: %s\n", path);
+			ret = -EINVAL;
+			goto out;
+		}
+	}
+
+	buf = kmalloc(DOWNLOAD_CHUCK + pad_size, GFP_KERNEL);
+	if (buf == NULL) {
+		printk(KERN_ERR "Error: kmalloc\n");
+		return -ENOMEM;
+	}
+
+	strcpy(buf+pad_size, type_string);
+	ret = gdm_wibro_send(usbdev, buf, strlen(type_string)+pad_size);
+	if (ret < 0)
+		goto out;
+
+	while ((len = filp->f_op->read(filp, buf+pad_size, DOWNLOAD_CHUCK,
+					&pos))) {
+		if (len < 0) {
+			ret = -1;
+			goto out;
+		}
+		readn += len;
+
+		ret = gdm_wibro_send(usbdev, buf, len+pad_size);
+		if (ret < 0)
+			goto out;
+
+		ret = em_wait_ack(usbdev, ((len+pad_size) % 512 == 0));
+		if (ret < 0)
+			goto out;
+	}
+
+	ret = em_wait_ack(usbdev, 1);
+	if (ret < 0)
+		goto out;
+
+out:
+	filp_close(filp, current->files);
+
+restore_fs:
+	set_fs(fs);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static int em_fw_reset(struct usb_device *usbdev)
+{
+	int ret;
+
+	/*Send ZLP*/
+	ret = gdm_wibro_send(usbdev, NULL, 0);
+	return ret;
+}
+
+int usb_emergency(struct usb_device *usbdev)
+{
+	int ret;
+
+	ret = em_download_image(usbdev, KERN_PATH, KERNEL_TYPE_STRING);
+	if (ret < 0)
+		goto out;
+	printk(KERN_INFO "GCT Emergency: Kernel download success.\n");
+
+	ret = em_download_image(usbdev, FS_PATH, FS_TYPE_STRING);
+	if (ret < 0)
+		goto out;
+	printk(KERN_INFO "GCT Emergency: Filesystem download success.\n");
+
+	ret = em_fw_reset(usbdev);
+out:
+	return ret;
+}
diff --git a/drivers/staging/gdm72xx/usb_boot.h b/drivers/staging/gdm72xx/usb_boot.h
new file mode 100644
index 000000000000..c715cd3cd300
--- /dev/null
+++ b/drivers/staging/gdm72xx/usb_boot.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __USB_BOOT_H__
+#define __USB_BOOT_H__
+
+struct usb_device;
+
+extern int usb_boot(struct usb_device *usbdev, u16 pid);
+extern int usb_emergency(struct usb_device *usbdev);
+
+#endif /* __USB_BOOT_H__ */
diff --git a/drivers/staging/gdm72xx/usb_ids.h b/drivers/staging/gdm72xx/usb_ids.h
new file mode 100644
index 000000000000..b34616b7203f
--- /dev/null
+++ b/drivers/staging/gdm72xx/usb_ids.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __USB_IDS_H__
+#define __USB_IDS_H__
+
+/*You can replace vendor-ID as yours.*/
+#define GCT_VID			0x1076
+
+/*You can replace product-ID as yours.*/
+#define GCT_PID1			0x7e00
+#define GCT_PID2			0x7f00
+
+#define USB_DEVICE_ID_MATCH_DEVICE_INTERFACE	\
+	(USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_CLASS)
+
+#define USB_DEVICE_INTF(vend, prod, intf)	\
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE_INTERFACE,	\
+	.idVendor = (vend), .idProduct = (prod), .bInterfaceClass = (intf)
+
+#define EMERGENCY_PID		0x720f
+#define BL_PID_MASK			0xffc0
+
+#define USB_DEVICE_BOOTLOADER(vid, pid)	\
+	{USB_DEVICE((vid), ((pid)&BL_PID_MASK)|B_DOWNLOAD)},	\
+	{USB_DEVICE((vid), ((pid)&BL_PID_MASK)|B_DOWNLOAD|B_DIFF_DL_DRV)}
+
+#define USB_DEVICE_CDC_DATA(vid, pid)	\
+	{USB_DEVICE_INTF((vid), (pid), USB_CLASS_CDC_DATA)}
+
+static const struct usb_device_id id_table[] = {
+	USB_DEVICE_BOOTLOADER(GCT_VID, GCT_PID1),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0x1),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0x2),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0x3),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0x4),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0x5),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0x6),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0x7),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0x8),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0x9),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0xa),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0xb),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0xc),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0xd),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0xe),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID1+0xf),
+
+	USB_DEVICE_BOOTLOADER(GCT_VID, GCT_PID2),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0x1),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0x2),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0x3),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0x4),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0x5),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0x6),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0x7),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0x8),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0x9),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0xa),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0xb),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0xc),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0xd),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0xe),
+	USB_DEVICE_CDC_DATA(GCT_VID, GCT_PID2+0xf),
+
+	{USB_DEVICE(GCT_VID, EMERGENCY_PID)},
+	{ }
+};
+
+#endif /* __USB_IDS_H__ */
diff --git a/drivers/staging/gdm72xx/wm_ioctl.h b/drivers/staging/gdm72xx/wm_ioctl.h
new file mode 100644
index 000000000000..9f46e06f2303
--- /dev/null
+++ b/drivers/staging/gdm72xx/wm_ioctl.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2012 GCT Semiconductor, Inc. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#if !defined(WM_IOCTL_H_20080714)
+#define WM_IOCTL_H_20080714
+#if !defined(__KERNEL__)
+#include <net/if.h>
+#endif
+
+#define NETLINK_WIMAX	31
+
+#define SIOCWMIOCTL			SIOCDEVPRIVATE
+
+#define SIOCG_DATA			0x8D10
+#define SIOCS_DATA			0x8D11
+
+enum {
+	SIOC_DATA_FSM,
+	SIOC_DATA_NETLIST,
+	SIOC_DATA_CONNNSP,
+	SIOC_DATA_CONNCOMP,
+	SIOC_DATA_PROFILEID,
+
+	SIOC_DATA_END
+};
+
+#define SIOC_DATA_MAX			16
+
+/* FSM */
+enum {
+	M_INIT = 0,
+	M_OPEN_OFF,
+	M_OPEN_ON,
+	M_SCAN,
+	M_CONNECTING,
+	M_CONNECTED,
+	M_FSM_END,
+
+	C_INIT = 0,
+	C_CONNSTART,
+	C_ASSOCSTART,
+	C_RNG,
+	C_SBC,
+	C_AUTH,
+	C_REG,
+	C_DSX,
+	C_ASSOCCOMPLETE,
+	C_CONNCOMPLETE,
+	C_FSM_END,
+
+	D_INIT = 0,
+	D_READY,
+	D_LISTEN,
+	D_IPACQUISITION,
+
+	END_FSM
+};
+
+struct fsm_s {
+	int		m_status;	/*main status*/
+	int		c_status;	/*connection status*/
+	int		d_status;	/*oma-dm status*/
+};
+
+struct data_s {
+	int		size;
+	void	*buf;
+};
+
+struct wm_req_s {
+	union {
+		char	ifrn_name[IFNAMSIZ];
+	} ifr_ifrn;
+
+	unsigned short	cmd;
+
+	unsigned short	data_id;
+	struct data_s	data;
+
+/* NOTE: sizeof(struct wm_req_s) must be less than sizeof(struct ifreq). */
+};
+
+#ifndef ifr_name
+#define ifr_name	ifr_ifrn.ifrn_name
+#endif
+
+#endif
diff --git a/drivers/staging/iio/Documentation/device.txt b/drivers/staging/iio/Documentation/device.txt
index 8926f2448cc9..0338c7cd0a8b 100644
--- a/drivers/staging/iio/Documentation/device.txt
+++ b/drivers/staging/iio/Documentation/device.txt
@@ -8,7 +8,7 @@ The crucial structure for device drivers in iio is iio_dev.
 
 First allocate one using:
 
-struct iio_dev *indio_dev = iio_allocate_device(sizeof(struct chip_state));
+struct iio_dev *indio_dev = iio_device_alloc(sizeof(struct chip_state));
 where chip_state is a structure of local state data for this instance of
 the chip.
 
@@ -78,4 +78,4 @@ be registered afterwards (otherwise the whole parentage of devices
 gets confused)
 
 On remove, iio_device_unregister(indio_dev) will remove the device from
-the core, and iio_free_device will clean up.
+the core, and iio_device_free will clean up.
diff --git a/drivers/staging/iio/Documentation/generic_buffer.c b/drivers/staging/iio/Documentation/generic_buffer.c
index 69a05b9456d6..bf553356fdad 100644
--- a/drivers/staging/iio/Documentation/generic_buffer.c
+++ b/drivers/staging/iio/Documentation/generic_buffer.c
@@ -60,9 +60,9 @@ void print2byte(int input, struct iio_channel_info *info)
 	/* First swap if incorrect endian */
 
 	if (info->be)
-		input = be16toh((uint_16t)input);
+		input = be16toh((uint16_t)input);
 	else
-		input = le16toh((uint_16t)input);
+		input = le16toh((uint16_t)input);
 
 	/* shift before conversion to avoid sign extension
 	   of left aligned data */
diff --git a/drivers/staging/iio/Documentation/iio_event_monitor.c b/drivers/staging/iio/Documentation/iio_event_monitor.c
index 0d21a277305f..22275845fb12 100644
--- a/drivers/staging/iio/Documentation/iio_event_monitor.c
+++ b/drivers/staging/iio/Documentation/iio_event_monitor.c
@@ -27,7 +27,7 @@
 #include <fcntl.h>
 #include <sys/ioctl.h>
 #include "iio_utils.h"
-#include "../events.h"
+#include <linux/iio/events.h>
 
 static const char * const iio_chan_type_name_spec[] = {
 	[IIO_VOLTAGE] = "voltage",
diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583 b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
new file mode 100755
index 000000000000..470f7ad9c073
--- /dev/null
+++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
@@ -0,0 +1,6 @@
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_calibrate
+KernelVersion:	2.6.37
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This property causes an internal calibration of the als gain trim
+		value which is later used in calculating illuminance in lux.
diff --git a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
new file mode 100755
index 000000000000..b2798b258bf7
--- /dev/null
+++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2x7x
@@ -0,0 +1,13 @@
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_calibrate
+KernelVersion:	3.3-rc1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Causes an internal calibration of the als gain trim
+		value which is later used in calculating illuminance in lux.
+
+What:		/sys/bus/iio/devices/device[n]/in_proximity0_calibrate
+KernelVersion:	3.3-rc1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Causes a recalculation and adjustment to the
+		proximity_thresh_rising_value.
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio b/drivers/staging/iio/Documentation/sysfs-bus-iio
deleted file mode 100644
index 46a995d6d261..000000000000
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio
+++ /dev/null
@@ -1,741 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Hardware chip or device accessed by one communication port.
-		Corresponds to a grouping of sensor channels. X is the IIO
-		index of the device.
-
-What:		/sys/bus/iio/devices/triggerX
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		An event driven driver of data capture to an in kernel buffer.
-		May be provided by a device driver that also has an IIO device
-		based on hardware generated events (e.g. data ready) or
-		provided by a separate driver for other hardware (e.g.
-		periodic timer, GPIO or high resolution timer).
-		Contains trigger type specific elements. These do not
-		generalize well and hence are not documented in this file.
-		X is the IIO index of the trigger.
-
-What:		/sys/bus/iio/devices/iio:deviceX/buffer
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Directory of attributes relating to the buffer for the device.
-
-What:		/sys/bus/iio/devices/iio:deviceX/name
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Description of the physical chip / device for device X.
-		Typically a part number.
-
-What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
-What:		/sys/bus/iio/devices/triggerX/sampling_frequency
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Some devices have internal clocks.  This parameter sets the
-		resulting sampling frequency.  In many devices this
-		parameter has an effect on input filters etc rather than
-		simply controlling when the input is sampled.  As this
-		effects datardy triggers, hardware buffers and the sysfs
-		direct access interfaces, it may be found in any of the
-		relevant directories.  If it effects all of the above
-		then it is to be found in the base device directory.
-
-What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
-What:		/sys/.../iio:deviceX/buffer/sampling_frequency_available
-What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		When the internal sampling clock can only take a small
-		discrete set of values, this file lists those available.
-
-What:		/sys/bus/iio/devices/iio:deviceX/oversampling_ratio
-KernelVersion:	2.6.38
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Hardware dependent ADC oversampling. Controls the sampling ratio
-		of the digital filter if available.
-
-What:		/sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available
-KernelVersion:	2.6.38
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Hardware dependent values supported by the oversampling filter.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw (unscaled no bias removal etc) voltage measurement from
-		channel Y. In special cases where the channel does not
-		correspond to externally available input one of the named
-		versions may be used. The number must always be specified and
-		unique to allow association with event codes. Units after
-		application of scale and offset are microvolts.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw (unscaled) differential voltage measurement equivalent to
-		channel Y - channel Z where these channel numbers apply to the
-		physically equivalent inputs when non differential readings are
-		separately available. In differential only parts, then all that
-		is required is a consistent labeling.  Units after application
-		of scale and offset are microvolts.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
-KernelVersion:	3.2
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw capacitance measurement from channel Y. Units after
-		application of scale and offset are nanofarads.
-
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
-KernelVersion:	3.2
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw differential capacitance measurement equivalent to
-		channel Y - channel Z where these channel numbers apply to the
-		physically equivalent inputs when non differential readings are
-		separately available. In differential only parts, then all that
-		is required is a consistent labeling.  Units after application
-		of scale and offset are nanofarads..
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_temp_y_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_temp_z_raw
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw (unscaled no bias removal etc) temperature measurement.
-		It an axis is specified it generally means that the temperature
-		sensor is associated with one part of a compound device (e.g.
-		a gyroscope axis). Units after application of scale and offset
-		are milli degrees Celsuis.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_input
-KernelVersion:	2.6.38
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Scaled temperature measurement in milli degrees Celsius.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_raw
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Acceleration in direction x, y or z (may be arbitrarily assigned
-		but should match other such assignments on device).
-		Has all of the equivalent parameters as per voltageY. Units
-		after application of scale and offset are m/s^2.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Angular velocity about axis x, y or z (may be arbitrarily
-		assigned) Data converted by application of offset then scale to
-		radians per second. Has all the equivalent parameters as
-		per voltageY. Units after application of scale and offset are
-		radians per second.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_incli_x_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_incli_y_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_incli_z_raw
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Inclination raw reading about axis x, y or z (may be
-		arbitrarily assigned). Data converted by application of offset
-		and scale to Degrees.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_raw
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Magnetic field along axis x, y or z (may be arbitrarily
-		assigned).  Data converted by application of offset
-		then scale to Gauss.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw
-KernelVersion:	2.6.36
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Highest value since some reset condition.  These
-		attributes allow access to this and are otherwise
-		the direct equivalent of the <type>Y[_name]_raw attributes.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw
-KernelVersion:	2.6.36
-Contact:	linux-iio@vger.kernel.org
-Description:
-		A computed peak value based on the sum squared magnitude of
-		the underlying value in the specified directions.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		If known for a device, offset to be added to <type>[Y]_raw prior
-		to scaling by <type>[Y]_scale in order to obtain value in the
-		<type> units as specified in <type>[y]_raw documentation.
-		Not present if the offset is always 0 or unknown. If Y or
-		axis <x|y|z> is not present, then the offset applies to all
-		in channels of <type>.
-		May be writable if a variable offset can be applied on the
-		device. Note that this is different to calibbias which
-		is for devices (or drivers) that apply offsets to compensate
-		for variation between different instances of the part, typically
-		adjusted by using some hardware supported calibration procedure.
-		Calibbias is applied internally, offset is applied in userspace
-		to the _raw output.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
-What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		If known for a device, scale to be applied to <type>Y[_name]_raw
-		post addition of <type>[Y][_name]_offset in order to obtain the
-		measured value in <type> units as specified in
-		<type>[Y][_name]_raw documentation..  If shared across all in
-		channels then Y and <x|y|z> are not present and the value is
-		called <type>[Y][_name]_scale. The peak modifier means this
-		value is applied to <type>Y[_name]_peak_raw values.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Hardware applied calibration offset. (assumed to fix production
-		inaccuracies).
-
-What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
-What		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Hardware applied calibration scale factor. (assumed to fix
-		production inaccuracies).  If shared across all channels,
-		<type>_calibscale is used.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
-What:		/sys/.../iio:deviceX/in_voltageX_scale_available
-What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
-What:		/sys/.../iio:deviceX/out_voltageX_scale_available
-What:		/sys/.../iio:deviceX/in_capacitance_scale_available
-KernelVersion:	2.635
-Contact:	linux-iio@vger.kernel.org
-Description:
-		If a discrete set of scale values are available, they
-		are listed in this attribute.
-
-What:		/sys/.../in_accel_filter_low_pass_3db_frequency
-What:		/sys/.../in_magn_filter_low_pass_3db_frequency
-What:		/sys/.../in_anglvel_filter_low_pass_3db_frequency
-KernelVersion:	3.2
-Contact:	linux-iio@vger.kernel.org
-Description:
-		If a known or controllable low pass filter is applied
-		to the underlying data channel, then this parameter
-		gives the 3dB frequency of the filter in Hz.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw (unscaled, no bias etc.) output voltage for
-		channel Y.  The number must always be specified and
-		unique if the output corresponds to a single channel.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw (unscaled, no bias etc.) output voltage for an aggregate of
-		channel Y, channel Z, etc.  This interface is available in cases
-		where a single output sets the value for multiple channels
-		simultaneously.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
-KernelVersion:	2.6.38
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the output powerdown mode.
-		DAC output stage is disconnected from the amplifier and
-		1kohm_to_gnd: connected to ground via an 1kOhm resistor
-		100kohm_to_gnd: connected to ground via an 100kOhm resistor
-		three_state: left floating
-		For a list of available output power down options read
-		outX_powerdown_mode_available. If Y is not present the
-		mode is shared across all outputs.
-
-What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
-What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
-KernelVersion:	2.6.38
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Lists all available output power down modes.
-		If Y is not present the mode is shared across all outputs.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
-KernelVersion:	2.6.38
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Writing 1 causes output Y to enter the power down mode specified
-		by the corresponding outY_powerdown_mode. Clearing returns to
-		normal operation. Y may be suppressed if all outputs are
-		controlled together.
-
-What:		/sys/bus/iio/devices/iio:deviceX/events
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Configuration of which hardware generated events are passed up
-		to user-space.
-
-What:		/sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en
-What:		/sys/.../iio:deviceX/events/in_tempY_thresh_rising_en
-What:		/sys/.../iio:deviceX/events/in_tempY_thresh_falling_en
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Event generated when channel passes a threshold in the specified
-		(_rising|_falling) direction. If the direction is not specified,
-		then either the device will report an event which ever direction
-		a single threshold value is passed in (e.g.
-		<type>[Y][_name]_<raw|input>_thresh_value) or
-		<type>[Y][_name]_<raw|input>_thresh_rising_value and
-		<type>[Y][_name]_<raw|input>_thresh_falling_value may take
-		different values, but the device can only enable both thresholds
-		or neither.
-		Note the driver will assume the last p events requested are
-		to be enabled where p is however many it supports (which may
-		vary depending on the exact set requested. So if you want to be
-		sure you have set what you think you have, check the contents of
-		these attributes after everything is configured. Drivers may
-		have to buffer any parameters so that they are consistent when
-		a given event type is enabled a future point (and not those for
-		whatever event was previously enabled).
-
-What:		/sys/.../iio:deviceX/events/in_accel_x_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_x_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_accel_y_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_y_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_accel_z_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_z_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_magn_x_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_magn_x_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_magn_y_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_magn_y_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_magn_z_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_magn_z_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_voltageY_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_voltageY_roc_falling_en
-What:		/sys/.../iio:deviceX/events/in_tempY_roc_rising_en
-What:		/sys/.../iio:deviceX/events/in_tempY_roc_falling_en
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Event generated when channel passes a threshold on the rate of
-		change (1st differential) in the specified (_rising|_falling)
-		direction. If the direction is not specified, then either the
-		device will report an event which ever direction a single
-		threshold value is passed in (e.g.
-		<type>[Y][_name]_<raw|input>_roc_value) or
-		<type>[Y][_name]_<raw|input>_roc_rising_value and
-		<type>[Y][_name]_<raw|input>_roc_falling_value may take
-		different values, but the device can only enable both rate of
-		change thresholds or neither.
-		Note the driver will assume the last p events requested are
-		to be enabled where p is however many it supports (which may
-		vary depending on the exact set requested. So if you want to be
-		sure you have set what you think you have, check the contents of
-		these attributes after everything is configured. Drivers may
-		have to buffer any parameters so that they are consistent when
-		a given event type is enabled a future point (and not those for
-		whatever event was previously enabled).
-
-What:		/sys/.../events/in_accel_x_raw_thresh_rising_value
-What:		/sys/.../events/in_accel_x_raw_thresh_falling_value
-What:		/sys/.../events/in_accel_y_raw_thresh_rising_value
-What:		/sys/.../events/in_accel_y_raw_thresh_falling_value
-What:		/sys/.../events/in_accel_z_raw_thresh_rising_value
-What:		/sys/.../events/in_accel_z_raw_thresh_falling_value
-What:		/sys/.../events/in_anglvel_x_raw_thresh_rising_value
-What:		/sys/.../events/in_anglvel_x_raw_thresh_falling_value
-What:		/sys/.../events/in_anglvel_y_raw_thresh_rising_value
-What:		/sys/.../events/in_anglvel_y_raw_thresh_falling_value
-What:		/sys/.../events/in_anglvel_z_raw_thresh_rising_value
-What:		/sys/.../events/in_anglvel_z_raw_thresh_falling_value
-What:		/sys/.../events/in_magn_x_raw_thresh_rising_value
-What:		/sys/.../events/in_magn_x_raw_thresh_falling_value
-What:		/sys/.../events/in_magn_y_raw_thresh_rising_value
-What:		/sys/.../events/in_magn_y_raw_thresh_falling_value
-What:		/sys/.../events/in_magn_z_raw_thresh_rising_value
-What:		/sys/.../events/in_magn_z_raw_thresh_falling_value
-What:		/sys/.../events/in_voltageY_supply_raw_thresh_rising_value
-What:		/sys/.../events/in_voltageY_supply_raw_thresh_falling_value
-What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
-What:		/sys/.../events/in_voltageY_raw_thresh_falling_value
-What:		/sys/.../events/in_tempY_raw_thresh_falling_value
-What:		/sys/.../events/in_tempY_raw_thresh_falling_value
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the value of threshold that the device is comparing
-		against for the events enabled by
-		<type>Y[_name]_thresh[_rising|falling]_en.
-		If separate attributes exist for the two directions, but
-		direction is not specified for this attribute, then a single
-		threshold value applies to both directions.
-		The raw or input element of the name indicates whether the
-		value is in raw device units or in processed units (as _raw
-		and _input do on sysfs direct channel read attributes).
-
-What:		/sys/.../events/in_accel_x_raw_roc_rising_value
-What:		/sys/.../events/in_accel_x_raw_roc_falling_value
-What:		/sys/.../events/in_accel_y_raw_roc_rising_value
-What:		/sys/.../events/in_accel_y_raw_roc_falling_value
-What:		/sys/.../events/in_accel_z_raw_roc_rising_value
-What:		/sys/.../events/in_accel_z_raw_roc_falling_value
-What:		/sys/.../events/in_anglvel_x_raw_roc_rising_value
-What:		/sys/.../events/in_anglvel_x_raw_roc_falling_value
-What:		/sys/.../events/in_anglvel_y_raw_roc_rising_value
-What:		/sys/.../events/in_anglvel_y_raw_roc_falling_value
-What:		/sys/.../events/in_anglvel_z_raw_roc_rising_value
-What:		/sys/.../events/in_anglvel_z_raw_roc_falling_value
-What:		/sys/.../events/in_magn_x_raw_roc_rising_value
-What:		/sys/.../events/in_magn_x_raw_roc_falling_value
-What:		/sys/.../events/in_magn_y_raw_roc_rising_value
-What:		/sys/.../events/in_magn_y_raw_roc_falling_value
-What:		/sys/.../events/in_magn_z_raw_roc_rising_value
-What:		/sys/.../events/in_magn_z_raw_roc_falling_value
-What:		/sys/.../events/in_voltageY_supply_raw_roc_rising_value
-What:		/sys/.../events/in_voltageY_supply_raw_roc_falling_value
-What:		/sys/.../events/in_voltageY_raw_roc_falling_value
-What:		/sys/.../events/in_voltageY_raw_roc_falling_value
-What:		/sys/.../events/in_tempY_raw_roc_falling_value
-What:		/sys/.../events/in_tempY_raw_roc_falling_value
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Specifies the value of rate of change threshold that the
-		device is comparing against for the events enabled by
-		<type>[Y][_name]_roc[_rising|falling]_en.
-		If separate attributes exist for the two directions,
-		but direction is not specified for this attribute,
-		then a single threshold value applies to both directions.
-		The raw or input element of the name indicates whether the
-		value is in raw device units or in processed units (as _raw
-		and _input do on sysfs direct channel read attributes).
-
-What:		/sys/.../events/in_accel_x_thresh_rising_period
-What:		/sys/.../events/in_accel_x_thresh_falling_period
-hat:		/sys/.../events/in_accel_x_roc_rising_period
-What:		/sys/.../events/in_accel_x_roc_falling_period
-What:		/sys/.../events/in_accel_y_thresh_rising_period
-What:		/sys/.../events/in_accel_y_thresh_falling_period
-What:		/sys/.../events/in_accel_y_roc_rising_period
-What:		/sys/.../events/in_accel_y_roc_falling_period
-What:		/sys/.../events/in_accel_z_thresh_rising_period
-What:		/sys/.../events/in_accel_z_thresh_falling_period
-What:		/sys/.../events/in_accel_z_roc_rising_period
-What:		/sys/.../events/in_accel_z_roc_falling_period
-What:		/sys/.../events/in_anglvel_x_thresh_rising_period
-What:		/sys/.../events/in_anglvel_x_thresh_falling_period
-What:		/sys/.../events/in_anglvel_x_roc_rising_period
-What:		/sys/.../events/in_anglvel_x_roc_falling_period
-What:		/sys/.../events/in_anglvel_y_thresh_rising_period
-What:		/sys/.../events/in_anglvel_y_thresh_falling_period
-What:		/sys/.../events/in_anglvel_y_roc_rising_period
-What:		/sys/.../events/in_anglvel_y_roc_falling_period
-What:		/sys/.../events/in_anglvel_z_thresh_rising_period
-What:		/sys/.../events/in_anglvel_z_thresh_falling_period
-What:		/sys/.../events/in_anglvel_z_roc_rising_period
-What:		/sys/.../events/in_anglvel_z_roc_falling_period
-What:		/sys/.../events/in_magn_x_thresh_rising_period
-What:		/sys/.../events/in_magn_x_thresh_falling_period
-What:		/sys/.../events/in_magn_x_roc_rising_period
-What:		/sys/.../events/in_magn_x_roc_falling_period
-What:		/sys/.../events/in_magn_y_thresh_rising_period
-What:		/sys/.../events/in_magn_y_thresh_falling_period
-What:		/sys/.../events/in_magn_y_roc_rising_period
-What:		/sys/.../events/in_magn_y_roc_falling_period
-What:		/sys/.../events/in_magn_z_thresh_rising_period
-What:		/sys/.../events/in_magn_z_thresh_falling_period
-What:		/sys/.../events/in_magn_z_roc_rising_period
-What:		/sys/.../events/in_magn_z_roc_falling_period
-What:		/sys/.../events/in_voltageY_supply_thresh_rising_period
-What:		/sys/.../events/in_voltageY_supply_thresh_falling_period
-What:		/sys/.../events/in_voltageY_supply_roc_rising_period
-What:		/sys/.../events/in_voltageY_supply_roc_falling_period
-What:		/sys/.../events/in_voltageY_thresh_rising_period
-What:		/sys/.../events/in_voltageY_thresh_falling_period
-What:		/sys/.../events/in_voltageY_roc_rising_period
-What:		/sys/.../events/in_voltageY_roc_falling_period
-What:		/sys/.../events/in_tempY_thresh_rising_period
-What:		/sys/.../events/in_tempY_thresh_falling_period
-What:		/sys/.../events/in_tempY_roc_rising_period
-What:		/sys/.../events/in_tempY_roc_falling_period
-What:		/sys/.../events/in_accel_x&y&z_mag_falling_period
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Period of time (in seconds) for which the condition must be
-		met before an event is generated. If direction is not
-		specified then this period applies to both directions.
-
-What:		/sys/.../iio:deviceX/events/in_accel_mag_en
-What:		/sys/.../iio:deviceX/events/in_accel_mag_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_mag_falling_en
-What:		/sys/.../iio:deviceX/events/in_accel_x_mag_en
-What:		/sys/.../iio:deviceX/events/in_accel_x_mag_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_x_mag_falling_en
-What:		/sys/.../iio:deviceX/events/in_accel_y_mag_en
-What:		/sys/.../iio:deviceX/events/in_accel_y_mag_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_y_mag_falling_en
-What:		/sys/.../iio:deviceX/events/in_accel_z_mag_en
-What:		/sys/.../iio:deviceX/events/in_accel_z_mag_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_z_mag_falling_en
-What:		/sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en
-What:		/sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Similar to in_accel_x_thresh[_rising|_falling]_en, but here the
-		magnitude of the channel is compared to the threshold, not its
-		signed value.
-
-What:		/sys/.../events/in_accel_raw_mag_value
-What:		/sys/.../events/in_accel_x_raw_mag_rising_value
-What:		/sys/.../events/in_accel_y_raw_mag_rising_value
-What:		/sys/.../events/in_accel_z_raw_mag_rising_value
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		The value to which the magnitude of the channel is compared. If
-		number or direction is not specified, applies to all channels of
-		this type.
-
-What:		/sys/bus/iio/devices/iio:deviceX/trigger/current_trigger
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		The name of the trigger source being used, as per string given
-		in /sys/class/iio/triggerY/name.
-
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/length
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Number of scans contained by the buffer.
-
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Bytes per scan.  Due to alignment fun, the scan may be larger
-		than implied directly by the scan_element parameters.
-
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
-KernelVersion:	2.6.35
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Actually start the buffer capture up.  Will start trigger
-		if first device and appropriate.
-
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/scan_elements
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Directory containing interfaces for elements that will be
-		captured for a single triggered sample set in the buffer.
-
-What:		/sys/.../buffer/scan_elements/in_accel_x_en
-What:		/sys/.../buffer/scan_elements/in_accel_y_en
-What:		/sys/.../buffer/scan_elements/in_accel_z_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_x_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_y_en
-What:		/sys/.../buffer/scan_elements/in_anglvel_z_en
-What:		/sys/.../buffer/scan_elements/in_magn_x_en
-What:		/sys/.../buffer/scan_elements/in_magn_y_en
-What:		/sys/.../buffer/scan_elements/in_magn_z_en
-What:		/sys/.../buffer/scan_elements/in_timestamp_en
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_en
-What:		/sys/.../buffer/scan_elements/in_voltageY_en
-What:		/sys/.../buffer/scan_elements/in_voltageY-voltageZ_en
-What:		/sys/.../buffer/scan_elements/in_incli_x_en
-What:		/sys/.../buffer/scan_elements/in_incli_y_en
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Scan element control for triggered data capture.
-
-What:		/sys/.../buffer/scan_elements/in_accel_type
-What:		/sys/.../buffer/scan_elements/in_anglvel_type
-What:		/sys/.../buffer/scan_elements/in_magn_type
-What:		/sys/.../buffer/scan_elements/in_incli_type
-What:		/sys/.../buffer/scan_elements/in_voltageY_type
-What:		/sys/.../buffer/scan_elements/in_voltage-in_type
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_type
-What:		/sys/.../buffer/scan_elements/in_timestamp_type
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Description of the scan element data storage within the buffer
-		and hence the form in which it is read from user-space.
-		Form is [be|le]:[s|u]bits/storagebits[>>shift].
-		be or le specifies big or little endian. s or u specifies if
-		signed (2's complement) or unsigned. bits is the number of bits
-		of data and storagebits is the space (after padding) that it
-		occupies in the buffer. shift if specified, is the shift that
-		needs to be applied prior to masking out unused bits. Some
-		devices put their data in the middle of the transferred elements
-		with additional information on both sides.  Note that some
-		devices will have additional information in the unused bits
-		so to get a clean value, the bits value must be used to mask
-		the buffer output value appropriately.  The storagebits value
-		also specifies the data alignment.  So s48/64>>2 will be a
-		signed 48 bit integer stored in a 64 bit location aligned to
-		a a64 bit boundary. To obtain the clean value, shift right 2
-		and apply a mask to zero the top 16 bits of the result.
-		For other storage combinations this attribute will be extended
-		appropriately.
-
-What:		/sys/.../buffer/scan_elements/in_accel_type_available
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		If the type parameter can take one of a small set of values,
-		this attribute lists them.
-
-What:		/sys/.../buffer/scan_elements/in_voltageY_index
-What:		/sys/.../buffer/scan_elements/in_voltageY_supply_index
-What:		/sys/.../buffer/scan_elements/in_accel_x_index
-What:		/sys/.../buffer/scan_elements/in_accel_y_index
-What:		/sys/.../buffer/scan_elements/in_accel_z_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_x_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_y_index
-What:		/sys/.../buffer/scan_elements/in_anglvel_z_index
-What:		/sys/.../buffer/scan_elements/in_magn_x_index
-What:		/sys/.../buffer/scan_elements/in_magn_y_index
-What:		/sys/.../buffer/scan_elements/in_magn_z_index
-What:		/sys/.../buffer/scan_elements/in_incli_x_index
-What:		/sys/.../buffer/scan_elements/in_incli_y_index
-What:		/sys/.../buffer/scan_elements/in_timestamp_index
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		A single positive integer specifying the position of this
-		scan element in the buffer. Note these are not dependent on
-		what is enabled and may not be contiguous. Thus for user-space
-		to establish the full layout these must be used in conjunction
-		with all _en attributes to establish which channels are present,
-		and the relevant _type attributes to establish the data storage
-		format.
-
-What:		/sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw
-KernelVersion:	2.6.38
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute is used to read the amount of quadrature error
-		present in the device at a given time.
-
-What:		/sys/.../iio:deviceX/ac_excitation_en
-KernelVersion:	3.1.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute, if available, is used to enable the AC
-		excitation mode found on some converters. In ac excitation mode,
-		the polarity of the excitation voltage is reversed on
-		alternate cycles, to eliminate DC errors.
-
-What:		/sys/.../iio:deviceX/bridge_switch_en
-KernelVersion:	3.1.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		This attribute, if available, is used to close or open the
-		bridge power down switch found on some converters.
-		In bridge applications, such as strain gauges and load cells,
-		the bridge itself consumes the majority of the current in the
-		system. To minimize the current consumption of the system,
-		the bridge can be disconnected (when it is not being used
-		using the bridge_switch_en attribute.
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
new file mode 100644
index 000000000000..1c35c507cc05
--- /dev/null
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
@@ -0,0 +1,20 @@
+What:		/sys/.../iio:deviceX/ac_excitation_en
+KernelVersion:	3.1.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute, if available, is used to enable the AC
+		excitation mode found on some converters. In ac excitation mode,
+		the polarity of the excitation voltage is reversed on
+		alternate cycles, to eliminate DC errors.
+
+What:		/sys/.../iio:deviceX/bridge_switch_en
+KernelVersion:	3.1.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute, if available, is used to close or open the
+		bridge power down switch found on some converters.
+		In bridge applications, such as strain gauges and load cells,
+		the bridge itself consumes the majority of the current in the
+		system. To minimize the current consumption of the system,
+		the bridge can be disconnected (when it is not being used
+		using the bridge_switch_en attribute.
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-dds b/drivers/staging/iio/Documentation/sysfs-bus-iio-dds
index ffdd5478a35d..ee8c509c6733 100644
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-dds
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-dds
@@ -1,83 +1,86 @@
 
-What:		/sys/bus/iio/devices/.../ddsX_freqY
+What:		/sys/bus/iio/devices/.../out_altvoltageX_frequencyY
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Stores frequency into tuning word Y.
-		There will be more than one ddsX_freqY file, which allows for
-		pin controlled FSK Frequency Shift Keying
-		(ddsX_pincontrol_freq_en is active) or the user can control
-		the desired active tuning word by writing Y to the
-		ddsX_freqsymbol file.
+		There will be more than one out_altvoltageX_frequencyY file,
+		which allows for pin controlled FSK Frequency Shift Keying
+		(out_altvoltageX_pincontrol_frequency_en is active) or the user
+		can control the desired active tuning word by writing Y to the
+		out_altvoltageX_frequencysymbol file.
 
-What:		/sys/bus/iio/devices/.../ddsX_freqY_scale
+What:		/sys/bus/iio/devices/.../out_altvoltageX_frequencyY_scale
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Scale to be applied to ddsX_freqY in order to obtain the
-		desired value in Hz. If shared across all frequency registers
-		Y is not present. It is also possible X is not present if
-		shared across all channels.
+		Scale to be applied to out_altvoltageX_frequencyY in order to
+		obtain the desired value in Hz. If shared across all frequency
+		registers Y is not present. It is also possible X is not present
+		if shared across all channels.
 
-What:		/sys/bus/iio/devices/.../ddsX_freqsymbol
+What:		/sys/bus/iio/devices/.../out_altvoltageX_frequencysymbol
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Specifies the active output frequency tuning word. The value
-		corresponds to the Y in ddsX_freqY. To exit this mode the user
-		can write ddsX_pincontrol_freq_en or ddsX_out_enable file.
+		corresponds to the Y in out_altvoltageX_frequencyY.
+		To exit this mode the user can write
+		out_altvoltageX_pincontrol_frequency_en or
+		out_altvoltageX_out_enable file.
 
-What:		/sys/bus/iio/devices/.../ddsX_phaseY
+What:		/sys/bus/iio/devices/.../out_altvoltageX_phaseY
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Stores phase into Y.
-		There will be more than one ddsX_phaseY file, which allows for
-		pin controlled PSK Phase Shift Keying
-		(ddsX_pincontrol_phase_en is active) or the user can
+		There will be more than one out_altvoltageX_phaseY file, which
+		allows for pin controlled PSK Phase Shift Keying
+		(out_altvoltageX_pincontrol_phase_en is active) or the user can
 		control the desired phase Y which is added to the phase
-		accumulator output by writing Y to the en_phase file.
+		accumulator output by writing Y to the phase_en file.
 
-What:		/sys/bus/iio/devices/.../ddsX_phaseY_scale
+What:		/sys/bus/iio/devices/.../out_altvoltageX_phaseY_scale
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Scale to be applied to ddsX_phaseY in order to obtain the
-		desired value in rad. If shared across all phase registers
+		Scale to be applied to out_altvoltageX_phaseY in order to obtain
+		the desired value in rad. If shared across all phase registers
 		Y is not present. It is also possible X is not present if
 		shared across all channels.
 
-What:		/sys/bus/iio/devices/.../ddsX_phasesymbol
+What:		/sys/bus/iio/devices/.../out_altvoltageX_phasesymbol
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Specifies the active phase Y which is added to the phase
 		accumulator output. The value corresponds to the Y in
-		ddsX_phaseY. To exit this mode the user can write
-		ddsX_pincontrol_phase_en or disable file.
+		out_altvoltageX_phaseY. To exit this mode the user can write
+		out_altvoltageX_pincontrol_phase_en or disable file.
 
-What:		/sys/bus/iio/devices/.../ddsX_pincontrol_en
-What:		/sys/bus/iio/devices/.../ddsX_pincontrol_freq_en
-What:		/sys/bus/iio/devices/.../ddsX_pincontrol_phase_en
+What:		/sys/bus/iio/devices/.../out_altvoltageX_pincontrol_en
+What:		/sys/bus/iio/devices/.../out_altvoltageX_pincontrol_frequency_en
+What:		/sys/bus/iio/devices/.../out_altvoltageX_pincontrol_phase_en
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
-		ddsX_pincontrol_en: Both, the active frequency and phase is
-		controlled by the respective phase and frequency control inputs.
-		In case the device in question allows to independent controls,
-		then there are dedicated files (ddsX_pincontrol_freq_en,
-		ddsX_pincontrol_phase_en).
+		out_altvoltageX_pincontrol_en: Both, the active frequency and
+		phase is controlled by the respective phase and frequency
+		control inputs. In case the device in features independent
+		controls, then there are dedicated files
+		(out_altvoltageX_pincontrol_frequency_en,
+		out_altvoltageX_pincontrol_phase_en).
 
-What:		/sys/bus/iio/devices/.../ddsX_out_enable
-What:		/sys/bus/iio/devices/.../ddsX_outY_enable
+What:		/sys/bus/iio/devices/.../out_altvoltageX_out_enable
+What:		/sys/bus/iio/devices/.../out_altvoltageX_outY_enable
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
-		ddsX_outY_enable controls signal generation on output Y of
-		channel X. Y may be suppressed if all channels are
+		out_altvoltageX_outY_enable controls signal generation on
+		output Y of channel X. Y may be suppressed if all channels are
 		controlled together.
 
-What:		/sys/bus/iio/devices/.../ddsX_outY_wavetype
+What:		/sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -86,7 +89,7 @@ Description:
 		For a list of available output waveform options read
 		available_output_modes.
 
-What:		/sys/bus/iio/devices/.../ddsX_outY_wavetype_available
+What:		/sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype_available
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
index edbf470e4e30..715c74dcb53a 100644
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
+++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
@@ -26,7 +26,7 @@ Description:
 		Hardware dependent list of possible values supported for the
 		adc_resolution of the given sensor.
 
-What:		/sys/bus/iio/devices/device[n]/illuminance0[_input|_raw]
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0[_input|_raw]
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -45,7 +45,7 @@ Description:
 		do this calculation manually by reading the infrared sensor
 		value and doing the negation in sw.
 
-What:		/sys/bus/iio/devices/device[n]/proximity[_input|_raw]
+What:		/sys/bus/iio/devices/device[n]/in_proximity[_input|_raw]
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -63,23 +63,22 @@ Description:
 		and if expressed in SI units, should include _input. If this
 		value is not in SI units, then it should include _raw.
 
-What:		/sys/bus/iio/devices/device[n]/illuminance0_target
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_target
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		This property gets/sets the last known external
 		lux measurement used in/for calibration.
 
-What:		/sys/bus/iio/devices/device[n]/illuminance0_integration_time
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_integration_time
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		This property gets/sets the sensors ADC analog integration time.
 
-What:		/sys/bus/iio/devices/device[n]/illuminance0_calibscale
+What:		/sys/bus/iio/devices/device[n]/in_illuminance0_lux_table
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Hardware or software applied calibration scale factor assumed
-		to account for attenuation due to industrial design (glass
-		filters or aperture holes).
+		This property gets/sets the table of coefficients
+		used in calculating illuminance in lux.
diff --git a/drivers/staging/iio/Documentation/trigger.txt b/drivers/staging/iio/Documentation/trigger.txt
index fc2012ebc100..75cc37ff1ed0 100644
--- a/drivers/staging/iio/Documentation/trigger.txt
+++ b/drivers/staging/iio/Documentation/trigger.txt
@@ -5,7 +5,7 @@ an IIO device.  Whilst this can create device specific complexities
 such triggers are registered with the core in the same way as
 stand-alone triggers.
 
-struct iio_trig *trig = iio_allocate_trigger("<trigger format string>", ...);
+struct iio_trig *trig = iio_trigger_alloc("<trigger format string>", ...);
 
 allocates a trigger structure.  The key elements to then fill in within
 a driver are:
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index fe1586718880..3c8e5ec26ac1 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -1,16 +1,9 @@
 #
 # Industrial I/O subsytem configuration
 #
+menu "IIO staging drivers"
+	depends on IIO
 
-menuconfig IIO
-	tristate "Industrial I/O support"
-	depends on GENERIC_HARDIRQS
-	help
-	  The industrial I/O subsystem provides a unified framework for
-	  drivers for many different types of embedded sensors using a
-	  number of different physical interfaces (i2c, spi, etc). See
-	  drivers/staging/iio/Documentation for more information.
-if IIO
 config IIO_ST_HWMON
 	tristate "Hwmon driver that uses channels specified via iio maps"
 	depends on HWMON
@@ -19,12 +12,6 @@ config IIO_ST_HWMON
 	  map allows IIO devices to provide  basic hwmon functionality
 	  for those channels specified in the map.
 
-config IIO_BUFFER
-	bool "Enable buffer support within IIO"
-	help
-	  Provide core support for various buffer based data
-	  acquisition methods.
-
 if IIO_BUFFER
 
 config IIO_SW_RING
@@ -36,39 +23,14 @@ config IIO_SW_RING
 	  with the intention that some devices would be able to write
 	  in interrupt context.
 
-config IIO_KFIFO_BUF
-	select IIO_TRIGGER
-	tristate "Industrial I/O buffering based on kfifo"
-	help
-	  A simple fifo based on kfifo.  Use this if you want a fifo
-	  rather than a ring buffer. Note that this currently provides
-	  no buffer events so it is up to userspace to work out how
-	  often to read from the buffer.
-
 endif # IIO_BUFFER
 
-config IIO_TRIGGER
-	boolean "Enable triggered sampling support"
-	help
-	  Provides IIO core support for triggers.  Currently these
-	  are used to initialize capture of samples to push into
-	  ring buffers.  The triggers are effectively a 'capture
-	  data now' interrupt.
-
-config IIO_CONSUMERS_PER_TRIGGER
-       int "Maximum number of consumers per trigger"
-       depends on IIO_TRIGGER
-       default "2"
-       help
-	This value controls the maximum number of consumers that a
-	given trigger may handle. Default is 2.
-
 source "drivers/staging/iio/accel/Kconfig"
 source "drivers/staging/iio/adc/Kconfig"
 source "drivers/staging/iio/addac/Kconfig"
 source "drivers/staging/iio/cdc/Kconfig"
 source "drivers/staging/iio/dac/Kconfig"
-source "drivers/staging/iio/dds/Kconfig"
+source "drivers/staging/iio/frequency/Kconfig"
 source "drivers/staging/iio/gyro/Kconfig"
 source "drivers/staging/iio/impedance-analyzer/Kconfig"
 source "drivers/staging/iio/imu/Kconfig"
@@ -104,4 +66,4 @@ config IIO_SIMPLE_DUMMY_BUFFER
 
 endif # IIO_SIMPLE_DUMMY
 
-endif # IIO
+endmenu
diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
index 5075291dda7a..6a46d5afb380 100644
--- a/drivers/staging/iio/Makefile
+++ b/drivers/staging/iio/Makefile
@@ -2,13 +2,7 @@
 # Makefile for the industrial I/O core.
 #
 
-obj-$(CONFIG_IIO) += industrialio.o
-industrialio-y := industrialio-core.o industrialio-event.o inkern.o
-industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
-industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
-
 obj-$(CONFIG_IIO_SW_RING) += ring_sw.o
-obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o
 
 obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o
 iio_dummy-y := iio_simple_dummy.o
@@ -24,7 +18,7 @@ obj-y += adc/
 obj-y += addac/
 obj-y += cdc/
 obj-y += dac/
-obj-y += dds/
+obj-y += frequency/
 obj-y += gyro/
 obj-y += impedance-analyzer/
 obj-y += imu/
diff --git a/drivers/staging/iio/TODO b/drivers/staging/iio/TODO
index d1ad35e24abb..cf3f9489b9da 100644
--- a/drivers/staging/iio/TODO
+++ b/drivers/staging/iio/TODO
@@ -67,7 +67,7 @@ e-mailing the normal IIO list (see below).
 
 Documentation
 1) Lots of cleanup and expansion.
-2) Some device require indvidual docs.
+2) Some device require individual docs.
 
 Contact: Jonathan Cameron <jic23@cam.ac.uk>.
 Mailing list: linux-iio@vger.kernel.org
diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c
index d439e45d07fa..02b340919c0e 100644
--- a/drivers/staging/iio/accel/adis16201_core.c
+++ b/drivers/staging/iio/accel/adis16201_core.c
@@ -15,9 +15,9 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16201.h"
 
@@ -171,7 +171,7 @@ static ssize_t adis16201_write_reset(struct device *dev,
 	ret = strtobool(buf, &res);
 	if (ret || !res)
 		return ret;
-	return adis16201_reset(dev_get_drvdata(dev));
+	return adis16201_reset(dev_to_iio_dev(dev));
 }
 
 int adis16201_set_irq(struct iio_dev *indio_dev, bool enable)
@@ -298,7 +298,7 @@ static int adis16201_read_raw(struct iio_dev *indio_dev,
 	s16 val16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16201_addresses[chan->address][0];
 		ret = adis16201_spi_read_reg_16(indio_dev, addr, &val16);
@@ -406,39 +406,104 @@ static int adis16201_write_raw(struct iio_dev *indio_dev,
 }
 
 static struct iio_chan_spec adis16201_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0,
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "supply",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_supply, ADIS16201_SCAN_SUPPLY,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
+		.address = in_supply,
+		.scan_index = ADIS16201_SCAN_SUPPLY,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
 		 IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
-		 temp, ADIS16201_SCAN_TEMP,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X,
+		.address = temp,
+		.scan_index = ADIS16201_SCAN_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_x, ADIS16201_SCAN_ACC_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y,
+		.address = accel_x,
+		.scan_index = ADIS16201_SCAN_ACC_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_y, ADIS16201_SCAN_ACC_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
+		.address = accel_y,
+		.scan_index = ADIS16201_SCAN_ACC_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_aux, ADIS16201_SCAN_AUX_ADC,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_X,
+		.address = in_aux,
+		.scan_index = ADIS16201_SCAN_AUX_ADC,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 incli_x, ADIS16201_SCAN_INCLI_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_Y,
+		.address = incli_x,
+		.scan_index = ADIS16201_SCAN_INCLI_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 incli_y, ADIS16201_SCAN_INCLI_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
+		.address = incli_y,
+		.scan_index = ADIS16201_SCAN_INCLI_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(7)
 };
 
@@ -467,7 +532,7 @@ static int __devinit adis16201_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -522,7 +587,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16201_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -535,7 +600,7 @@ static int adis16201_remove(struct spi_device *spi)
 	adis16201_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16201_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16201_ring.c b/drivers/staging/iio/accel/adis16201_ring.c
index 97f9e6b159d9..247602a8e54c 100644
--- a/drivers/staging/iio/accel/adis16201_ring.c
+++ b/drivers/staging/iio/accel/adis16201_ring.c
@@ -5,9 +5,9 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16201.h"
 
 
@@ -66,9 +66,8 @@ static irqreturn_t adis16201_trigger_handler(int irq, void *p)
 
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize, GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
@@ -81,7 +80,7 @@ static irqreturn_t adis16201_trigger_handler(int irq, void *p)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)data, pf->timestamp);
diff --git a/drivers/staging/iio/accel/adis16201_trigger.c b/drivers/staging/iio/accel/adis16201_trigger.c
index bce505e716d0..96fdabbac201 100644
--- a/drivers/staging/iio/accel/adis16201_trigger.c
+++ b/drivers/staging/iio/accel/adis16201_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16201.h"
 
 /**
@@ -29,7 +29,7 @@ int adis16201_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16201_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("adis16201-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("adis16201-dev%d", indio_dev->id);
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -56,7 +56,7 @@ int adis16201_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -67,5 +67,5 @@ void adis16201_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(state->trig);
 	free_irq(state->us->irq, state->trig);
-	iio_free_trigger(state->trig);
+	iio_trigger_free(state->trig);
 }
diff --git a/drivers/staging/iio/accel/adis16203_core.c b/drivers/staging/iio/accel/adis16203_core.c
index 1a5140f9e3f4..15d46bfd1b42 100644
--- a/drivers/staging/iio/accel/adis16203_core.c
+++ b/drivers/staging/iio/accel/adis16203_core.c
@@ -15,9 +15,9 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16203.h"
 
@@ -182,7 +182,7 @@ static ssize_t adis16203_write_reset(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	if (len < 1)
 		return -EINVAL;
 	switch (buf[0]) {
@@ -305,7 +305,7 @@ static int adis16203_read_raw(struct iio_dev *indio_dev,
 	u8 addr;
 	s16 val16;
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16203_addresses[chan->address][0];
 		ret = adis16203_spi_read_reg_16(indio_dev, addr, &val16);
@@ -372,29 +372,75 @@ static int adis16203_read_raw(struct iio_dev *indio_dev,
 }
 
 static struct iio_chan_spec adis16203_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_supply, ADIS16203_SCAN_SUPPLY,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_aux, ADIS16203_SCAN_AUX_ADC,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_X,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 incli_x, ADIS16203_SCAN_INCLI_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	/* Fixme: Not what it appears to be - see data sheet */
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_Y,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 incli_y, ADIS16203_SCAN_INCLI_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
-		 IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
-		 temp, ADIS16203_SCAN_TEMP,
-		 IIO_ST('u', 12, 16, 0), 0),
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "supply",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_supply,
+		.scan_index = ADIS16203_SCAN_SUPPLY,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_aux,
+		.scan_index = ADIS16203_SCAN_AUX_ADC,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = incli_x,
+		.scan_index = ADIS16203_SCAN_INCLI_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, { /* Fixme: Not what it appears to be - see data sheet */
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = incli_y,
+		.scan_index = ADIS16203_SCAN_INCLI_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
+		.address = temp,
+		.scan_index = ADIS16203_SCAN_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(5),
 };
 
@@ -423,7 +469,7 @@ static int __devinit adis16203_probe(struct spi_device *spi)
 	struct adis16203_state *st;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -477,7 +523,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16203_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -490,7 +536,7 @@ static int adis16203_remove(struct spi_device *spi)
 	adis16203_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16203_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16203_ring.c b/drivers/staging/iio/accel/adis16203_ring.c
index 6a8963db4f60..7bbd2c2bbd19 100644
--- a/drivers/staging/iio/accel/adis16203_ring.c
+++ b/drivers/staging/iio/accel/adis16203_ring.c
@@ -5,20 +5,19 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16203.h"
 
 /**
  * adis16203_read_ring_data() read data registers which will be placed into ring
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @indio_dev: the IIO device
  * @rx: somewhere to pass back the value read
  **/
-static int adis16203_read_ring_data(struct device *dev, u8 *rx)
+static int adis16203_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct adis16203_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfers[ADIS16203_OUTPUTS + 1];
 	int ret;
@@ -66,22 +65,21 @@ static irqreturn_t adis16203_trigger_handler(int irq, void *p)
 
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize, GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
 	}
 
 	if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength) &&
-	    adis16203_read_ring_data(&indio_dev->dev, st->rx) >= 0)
+	    adis16203_read_ring_data(indio_dev, st->rx) >= 0)
 		for (; i < bitmap_weight(indio_dev->active_scan_mask,
 					 indio_dev->masklength); i++)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring,
diff --git a/drivers/staging/iio/accel/adis16203_trigger.c b/drivers/staging/iio/accel/adis16203_trigger.c
index 24bcb8e15c55..b8a04073d6d7 100644
--- a/drivers/staging/iio/accel/adis16203_trigger.c
+++ b/drivers/staging/iio/accel/adis16203_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16203.h"
 
 /**
@@ -29,7 +29,7 @@ int adis16203_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16203_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("adis16203-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("adis16203-dev%d", indio_dev->id);
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -58,7 +58,7 @@ int adis16203_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -69,5 +69,5 @@ void adis16203_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/accel/adis16204_core.c b/drivers/staging/iio/accel/adis16204_core.c
index fa89364b841e..ac9d95e4ea47 100644
--- a/drivers/staging/iio/accel/adis16204_core.c
+++ b/drivers/staging/iio/accel/adis16204_core.c
@@ -18,9 +18,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16204.h"
 
@@ -173,7 +173,7 @@ static ssize_t adis16204_read_14bit_signed(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	s16 val = 0;
 	ssize_t ret;
@@ -211,7 +211,7 @@ static ssize_t adis16204_write_reset(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 
 	if (len < 1)
 		return -EINVAL;
@@ -342,7 +342,7 @@ static int adis16204_read_raw(struct iio_dev *indio_dev,
 	int addrind;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16204_addresses[chan->address][0];
 		ret = adis16204_spi_read_reg_16(indio_dev, addr, &val16);
@@ -444,31 +444,78 @@ static int adis16204_write_raw(struct iio_dev *indio_dev,
 }
 
 static struct iio_chan_spec adis16204_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 0, 0, "supply", 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_supply, ADIS16204_SCAN_SUPPLY,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_aux, ADIS16204_SCAN_AUX_ADC,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
-		 IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
-		 temp, ADIS16204_SCAN_TEMP,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
-		 IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
-		 accel_x, ADIS16204_SCAN_ACC_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
-		 IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
-		 accel_y, ADIS16204_SCAN_ACC_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1, /* Note was not previously indexed */
+		.channel = 0,
+		.extend_name = "supply",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_supply,
+		.scan_index = ADIS16204_SCAN_SUPPLY,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_aux,
+		.scan_index = ADIS16204_SCAN_AUX_ADC,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
+		.address = temp,
+		.scan_index = ADIS16204_SCAN_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
+		.address = accel_x,
+		.scan_index = ADIS16204_SCAN_ACC_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
+		.address = accel_y,
+		.scan_index = ADIS16204_SCAN_ACC_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(5),
 };
 
@@ -498,7 +545,7 @@ static int __devinit adis16204_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -551,7 +598,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16204_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -564,7 +611,7 @@ static int adis16204_remove(struct spi_device *spi)
 	adis16204_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16204_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16204_ring.c b/drivers/staging/iio/accel/adis16204_ring.c
index 5c8ab7338864..f73518bc6587 100644
--- a/drivers/staging/iio/accel/adis16204_ring.c
+++ b/drivers/staging/iio/accel/adis16204_ring.c
@@ -5,20 +5,19 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16204.h"
 
 /**
  * adis16204_read_ring_data() read data registers which will be placed into ring
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @indio_dev: the IIO device
  * @rx: somewhere to pass back the value read
  **/
-static int adis16204_read_ring_data(struct device *dev, u8 *rx)
+static int adis16204_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct adis16204_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfers[ADIS16204_OUTPUTS + 1];
 	int ret;
@@ -63,22 +62,21 @@ static irqreturn_t adis16204_trigger_handler(int irq, void *p)
 	struct iio_buffer *ring = indio_dev->buffer;
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize, GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
 	}
 
 	if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength) &&
-	    adis16204_read_ring_data(&indio_dev->dev, st->rx) >= 0)
+	    adis16204_read_ring_data(indio_dev, st->rx) >= 0)
 		for (; i < bitmap_weight(indio_dev->active_scan_mask,
 					 indio_dev->masklength); i++)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)data, pf->timestamp);
diff --git a/drivers/staging/iio/accel/adis16204_trigger.c b/drivers/staging/iio/accel/adis16204_trigger.c
index 6e542af02c09..408a1682368e 100644
--- a/drivers/staging/iio/accel/adis16204_trigger.c
+++ b/drivers/staging/iio/accel/adis16204_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16204.h"
 
 /**
@@ -29,7 +29,7 @@ int adis16204_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16204_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("adis16204-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("adis16204-dev%d", indio_dev->id);
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -58,7 +58,7 @@ int adis16204_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -69,5 +69,5 @@ void adis16204_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(state->trig);
 	free_irq(state->us->irq, state->trig);
-	iio_free_trigger(state->trig);
+	iio_trigger_free(state->trig);
 }
diff --git a/drivers/staging/iio/accel/adis16209_core.c b/drivers/staging/iio/accel/adis16209_core.c
index a98715f6bd6d..f6fd0d31d4f0 100644
--- a/drivers/staging/iio/accel/adis16209_core.c
+++ b/drivers/staging/iio/accel/adis16209_core.c
@@ -16,9 +16,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16209.h"
 
@@ -157,7 +157,7 @@ static ssize_t adis16209_write_reset(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 
 	if (len < 1)
 		return -EINVAL;
@@ -331,7 +331,7 @@ static int adis16209_read_raw(struct iio_dev *indio_dev,
 	s16 val16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16209_addresses[chan->address][0];
 		ret = adis16209_spi_read_reg_16(indio_dev, addr, &val16);
@@ -408,41 +408,114 @@ static int adis16209_read_raw(struct iio_dev *indio_dev,
 }
 
 static struct iio_chan_spec adis16209_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_supply, ADIS16209_SCAN_SUPPLY,
-		 IIO_ST('u', 14, 16, 0), 0),
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
-		 IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
-		 temp, ADIS16209_SCAN_TEMP,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_x, ADIS16209_SCAN_ACC_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_y, ADIS16209_SCAN_ACC_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_aux, ADIS16209_SCAN_AUX_ADC,
-		 IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_X,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 incli_x, ADIS16209_SCAN_INCLI_X,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_INCLI, 1, 0, 0, NULL, 0, IIO_MOD_Y,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 incli_y, ADIS16209_SCAN_INCLI_Y,
-		 IIO_ST('s', 14, 16, 0), 0),
-	IIO_CHAN(IIO_ROT, 0, 1, 0, NULL, 0, IIO_MOD_X,
-		    0,
-		    rot, ADIS16209_SCAN_ROT,
-		    IIO_ST('s', 14, 16, 0), 0),
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "supply",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_supply,
+		.scan_index = ADIS16209_SCAN_SUPPLY,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 0,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT,
+		.address = temp,
+		.scan_index = ADIS16209_SCAN_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = accel_x,
+		.scan_index = ADIS16209_SCAN_ACC_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = accel_y,
+		.scan_index = ADIS16209_SCAN_ACC_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_aux,
+		.scan_index = ADIS16209_SCAN_AUX_ADC,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = incli_x,
+		.scan_index = ADIS16209_SCAN_INCLI_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_INCLI,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = incli_y,
+		.scan_index = ADIS16209_SCAN_INCLI_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ROT,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+		.address = rot,
+		.scan_index = ADIS16209_SCAN_ROT,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(8)
 };
 
@@ -471,7 +544,7 @@ static int __devinit adis16209_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -524,7 +597,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16209_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -539,7 +612,7 @@ static int adis16209_remove(struct spi_device *spi)
 	adis16209_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16209_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16209_ring.c b/drivers/staging/iio/accel/adis16209_ring.c
index 57254b6b38b7..090607504c93 100644
--- a/drivers/staging/iio/accel/adis16209_ring.c
+++ b/drivers/staging/iio/accel/adis16209_ring.c
@@ -5,20 +5,19 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16209.h"
 
 /**
  * adis16209_read_ring_data() read data registers which will be placed into ring
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @indio_dev: the IIO device
  * @rx: somewhere to pass back the value read
  **/
-static int adis16209_read_ring_data(struct device *dev, u8 *rx)
+static int adis16209_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct adis16209_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfers[ADIS16209_OUTPUTS + 1];
 	int ret;
@@ -61,25 +60,23 @@ static irqreturn_t adis16209_trigger_handler(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct adis16209_state *st = iio_priv(indio_dev);
 	struct iio_buffer *ring = indio_dev->buffer;
-
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize , GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
 	}
 
 	if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength) &&
-	    adis16209_read_ring_data(&indio_dev->dev, st->rx) >= 0)
+	    adis16209_read_ring_data(indio_dev, st->rx) >= 0)
 		for (; i < bitmap_weight(indio_dev->active_scan_mask,
 					 indio_dev->masklength); i++)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)data, pf->timestamp);
diff --git a/drivers/staging/iio/accel/adis16209_trigger.c b/drivers/staging/iio/accel/adis16209_trigger.c
index c5d82c1a55d9..2ad93dcaf40d 100644
--- a/drivers/staging/iio/accel/adis16209_trigger.c
+++ b/drivers/staging/iio/accel/adis16209_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16209.h"
 
 /**
@@ -38,7 +38,7 @@ int adis16209_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16209_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("adis16209-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("adis16209-dev%d", indio_dev->id);
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -66,7 +66,7 @@ int adis16209_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -77,5 +77,5 @@ void adis16209_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c
index 51a852d45482..6a9ac898cb01 100644
--- a/drivers/staging/iio/accel/adis16220_core.c
+++ b/drivers/staging/iio/accel/adis16220_core.c
@@ -15,8 +15,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #include "adis16220.h"
 
@@ -145,7 +145,7 @@ static ssize_t adis16220_read_16bit(struct device *dev,
 		char *buf)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	ssize_t ret;
 	s16 val = 0;
 
@@ -164,7 +164,7 @@ static ssize_t adis16220_write_16bit(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
 	u16 val;
@@ -208,7 +208,7 @@ static ssize_t adis16220_write_reset(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	bool val;
 	int ret;
 
@@ -228,7 +228,7 @@ static ssize_t adis16220_write_capture(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	bool val;
 	int ret;
 
@@ -393,7 +393,7 @@ static ssize_t adis16220_accel_bin_read(struct file *filp, struct kobject *kobj,
 					size_t count)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 
 	return adis16220_capture_buffer_read(indio_dev, buf,
 					off, count,
@@ -415,7 +415,7 @@ static ssize_t adis16220_adc1_bin_read(struct file *filp, struct kobject *kobj,
 				size_t count)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 
 	return adis16220_capture_buffer_read(indio_dev, buf,
 					off, count,
@@ -437,7 +437,7 @@ static ssize_t adis16220_adc2_bin_read(struct file *filp, struct kobject *kobj,
 				size_t count)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 
 	return adis16220_capture_buffer_read(indio_dev, buf,
 					off, count,
@@ -507,7 +507,7 @@ static int adis16220_read_raw(struct iio_dev *indio_dev,
 	u8 bits;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		addrind = 0;
 		break;
 	case IIO_CHAN_INFO_OFFSET:
@@ -575,11 +575,13 @@ static const struct iio_chan_spec adis16220_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.extend_name = "supply",
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in_supply,
 	}, {
 		.type = IIO_ACCEL,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 			     IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
 			     IIO_CHAN_INFO_PEAK_SEPARATE_BIT,
 		.address = accel,
@@ -587,20 +589,23 @@ static const struct iio_chan_spec adis16220_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 			     IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = temp,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 			     IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in_1,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 2,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = in_2,
 	}
 };
@@ -629,7 +634,7 @@ static int __devinit adis16220_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -680,7 +685,7 @@ error_rm_accel_bin:
 error_unregister_dev:
 	iio_device_unregister(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -695,7 +700,7 @@ static int adis16220_remove(struct spi_device *spi)
 	sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc1_bin);
 	sysfs_remove_bin_file(&indio_dev->dev.kobj, &accel_bin);
 	iio_device_unregister(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16240_core.c b/drivers/staging/iio/accel/adis16240_core.c
index 17f77fef7f2b..8b15eaea3381 100644
--- a/drivers/staging/iio/accel/adis16240_core.c
+++ b/drivers/staging/iio/accel/adis16240_core.c
@@ -19,9 +19,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16240.h"
 
@@ -154,7 +154,7 @@ static ssize_t adis16240_spi_read_signed(struct device *dev,
 		char *buf,
 		unsigned bits)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	int ret;
 	s16 val = 0;
 	unsigned shift = 16 - bits;
@@ -177,7 +177,7 @@ static ssize_t adis16240_read_12bit_signed(struct device *dev,
 		char *buf)
 {
 	ssize_t ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 
 	/* Take the iio_dev status lock */
 	mutex_lock(&indio_dev->mlock);
@@ -203,7 +203,7 @@ static ssize_t adis16240_write_reset(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 
 	if (len < 1)
 		return -EINVAL;
@@ -365,7 +365,7 @@ static int adis16240_read_raw(struct iio_dev *indio_dev,
 	s16 val16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16240_addresses[chan->address][0];
 		ret = adis16240_spi_read_reg_16(indio_dev, addr, &val16);
@@ -468,33 +468,88 @@ static int adis16240_write_raw(struct iio_dev *indio_dev,
 }
 
 static struct iio_chan_spec adis16240_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 in_supply, ADIS16240_SCAN_SUPPLY,
-		 IIO_ST('u', 10, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
-		 0,
-		 in_aux, ADIS16240_SCAN_AUX_ADC,
-		 IIO_ST('u', 10, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_x, ADIS16240_SCAN_ACC_X,
-		 IIO_ST('s', 10, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_y, ADIS16240_SCAN_ACC_Y,
-		 IIO_ST('s', 10, 16, 0), 0),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Z,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT |
-		 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
-		 accel_z, ADIS16240_SCAN_ACC_Z,
-		 IIO_ST('s', 10, 16, 0), 0),
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 temp, ADIS16240_SCAN_TEMP,
-		 IIO_ST('u', 10, 16, 0), 0),
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "supply",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = in_supply,
+		.scan_index = ADIS16240_SCAN_SUPPLY,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+		.address = in_aux,
+		.scan_index = ADIS16240_SCAN_AUX_ADC,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = accel_x,
+		.scan_index = ADIS16240_SCAN_ACC_X,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = accel_y,
+		.scan_index = ADIS16240_SCAN_ACC_Y,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_ACCEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+		.address = accel_z,
+		.scan_index = ADIS16240_SCAN_ACC_Z,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = temp,
+		.scan_index = ADIS16240_SCAN_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 10,
+			.storagebits = 16,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(6)
 };
 
@@ -523,7 +578,7 @@ static int __devinit adis16240_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -576,7 +631,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16240_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -592,7 +647,7 @@ static int adis16240_remove(struct spi_device *spi)
 	adis16240_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16240_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/adis16240_ring.c b/drivers/staging/iio/accel/adis16240_ring.c
index 43ba84e993ad..86a2a4757ea7 100644
--- a/drivers/staging/iio/accel/adis16240_ring.c
+++ b/drivers/staging/iio/accel/adis16240_ring.c
@@ -5,20 +5,19 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16240.h"
 
 /**
  * adis16240_read_ring_data() read data registers which will be placed into ring
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @indio_dev: the IIO device
  * @rx: somewhere to pass back the value read
  **/
-static int adis16240_read_ring_data(struct device *dev, u8 *rx)
+static int adis16240_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct adis16240_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfers[ADIS16240_OUTPUTS + 1];
 	int ret;
@@ -61,22 +60,21 @@ static irqreturn_t adis16240_trigger_handler(int irq, void *p)
 
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize, GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
 	}
 
 	if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength) &&
-	    adis16240_read_ring_data(&indio_dev->dev, st->rx) >= 0)
+	    adis16240_read_ring_data(indio_dev, st->rx) >= 0)
 		for (; i < bitmap_weight(indio_dev->active_scan_mask,
 					 indio_dev->masklength); i++)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)data, pf->timestamp);
diff --git a/drivers/staging/iio/accel/adis16240_trigger.c b/drivers/staging/iio/accel/adis16240_trigger.c
index 8e0ce568e64c..fa90a22b143e 100644
--- a/drivers/staging/iio/accel/adis16240_trigger.c
+++ b/drivers/staging/iio/accel/adis16240_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16240.h"
 
 /**
@@ -38,7 +38,7 @@ int adis16240_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16240_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("adis16240-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("adis16240-dev%d", indio_dev->id);
 	if (st->trig == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -67,7 +67,7 @@ int adis16240_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -78,5 +78,5 @@ void adis16240_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/accel/kxsd9.c b/drivers/staging/iio/accel/kxsd9.c
index d13d7215ff6e..8cf7cd943c90 100644
--- a/drivers/staging/iio/accel/kxsd9.c
+++ b/drivers/staging/iio/accel/kxsd9.c
@@ -23,8 +23,8 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define KXSD9_REG_X		0x00
 #define KXSD9_REG_Y		0x02
@@ -158,7 +158,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
 	struct kxsd9_state *st = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = kxsd9_read(indio_dev, chan->address);
 		if (ret < 0)
 			goto error_ret;
@@ -181,7 +181,8 @@ error_ret:
 		.type = IIO_ACCEL,					\
 		.modified = 1,						\
 		.channel2 = IIO_MOD_##axis,				\
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
 		.address = KXSD9_REG_##axis,				\
 	}
 
@@ -189,6 +190,7 @@ static struct iio_chan_spec kxsd9_channels[] = {
 	KXSD9_ACCEL_CHAN(X), KXSD9_ACCEL_CHAN(Y), KXSD9_ACCEL_CHAN(Z),
 	{
 		.type = IIO_VOLTAGE,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.indexed = 1,
 		.address = KXSD9_REG_AUX,
 	}
@@ -226,7 +228,7 @@ static int __devinit kxsd9_probe(struct spi_device *spi)
 	struct kxsd9_state *st;
 	int ret = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -254,7 +256,7 @@ static int __devinit kxsd9_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -262,7 +264,7 @@ error_ret:
 static int __devexit kxsd9_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c
index 376da5137967..9d263484fb86 100644
--- a/drivers/staging/iio/accel/lis3l02dq_core.c
+++ b/drivers/staging/iio/accel/lis3l02dq_core.c
@@ -23,10 +23,10 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
 
 #include "lis3l02dq.h"
 
@@ -257,7 +257,7 @@ static int lis3l02dq_read_raw(struct iio_dev *indio_dev,
 	u8 reg;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		/* Take the iio_dev status lock */
 		mutex_lock(&indio_dev->mlock);
 		if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
@@ -297,7 +297,7 @@ static ssize_t lis3l02dq_read_frequency(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	int ret, len = 0;
 	s8 t;
 	ret = lis3l02dq_spi_read_reg_8(indio_dev,
@@ -328,7 +328,7 @@ static ssize_t lis3l02dq_write_frequency(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	unsigned long val;
 	int ret;
 	u8 t;
@@ -513,7 +513,8 @@ static irqreturn_t lis3l02dq_event_handler(int irq, void *private)
 }
 
 #define LIS3L02DQ_INFO_MASK				\
-	(IIO_CHAN_INFO_SCALE_SHARED_BIT |		\
+	(IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+	 IIO_CHAN_INFO_SCALE_SHARED_BIT |		\
 	 IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |	\
 	 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT)
 
@@ -521,13 +522,26 @@ static irqreturn_t lis3l02dq_event_handler(int irq, void *private)
 	(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |	\
 	 IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING))
 
+#define LIS3L02DQ_CHAN(index, mod)				\
+	{							\
+		.type = IIO_ACCEL,				\
+		.modified = 1,					\
+		.channel2 = mod,				\
+		.info_mask =  LIS3L02DQ_INFO_MASK,		\
+		.address = index,				\
+		.scan_index = index,				\
+		.scan_type = {					\
+			.sign = 's',				\
+			.realbits = 12,				\
+			.storagebits = 16,			\
+		},						\
+		.event_mask = LIS3L02DQ_EVENT_MASK,		\
+	 }
+
 static struct iio_chan_spec lis3l02dq_channels[] = {
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X, LIS3L02DQ_INFO_MASK,
-		 0, 0, IIO_ST('s', 12, 16, 0), LIS3L02DQ_EVENT_MASK),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y, LIS3L02DQ_INFO_MASK,
-		 1, 1, IIO_ST('s', 12, 16, 0), LIS3L02DQ_EVENT_MASK),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Z, LIS3L02DQ_INFO_MASK,
-		 2, 2, IIO_ST('s', 12, 16, 0), LIS3L02DQ_EVENT_MASK),
+	LIS3L02DQ_CHAN(0, IIO_MOD_X),
+	LIS3L02DQ_CHAN(1, IIO_MOD_Y),
+	LIS3L02DQ_CHAN(2, IIO_MOD_Z),
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
@@ -666,7 +680,7 @@ static int __devinit lis3l02dq_probe(struct spi_device *spi)
 	struct lis3l02dq_state *st;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof *st);
+	indio_dev = iio_device_alloc(sizeof *st);
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -724,7 +738,7 @@ static int __devinit lis3l02dq_probe(struct spi_device *spi)
 	return 0;
 
 error_remove_trigger:
-	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
+	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)))
 		lis3l02dq_remove_trigger(indio_dev);
 error_free_interrupt:
 	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
@@ -734,7 +748,7 @@ error_uninitialize_buffer:
 error_unreg_buffer_funcs:
 	lis3l02dq_unconfigure_buffer(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -789,7 +803,7 @@ static int lis3l02dq_remove(struct spi_device *spi)
 	iio_buffer_unregister(indio_dev);
 	lis3l02dq_unconfigure_buffer(indio_dev);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 err_ret:
 	return ret;
 }
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index 0fc3973f32ae..51b00dfc0465 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -6,11 +6,11 @@
 #include <linux/slab.h>
 #include <linux/export.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../kfifo_buf.h"
-#include "../trigger.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
 #include "lis3l02dq.h"
 
 /**
@@ -137,9 +137,9 @@ static irqreturn_t lis3l02dq_trigger_handler(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct iio_buffer *buffer = indio_dev->buffer;
 	int len = 0;
-	size_t datasize = buffer->access->get_bytes_per_datum(buffer);
-	char *data = kmalloc(datasize, GFP_KERNEL);
+	char *data;
 
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(indio_dev->dev.parent,
 			"memory alloc failed in buffer bh");
@@ -150,7 +150,7 @@ static irqreturn_t lis3l02dq_trigger_handler(int irq, void *p)
 		len = lis3l02dq_get_buffer_element(indio_dev, data);
 
 	  /* Guaranteed to be aligned with 8 byte boundary */
-	if (buffer->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*(s64 *)(((phys_addr_t)data + len
 				+ sizeof(s64) - 1) & ~(sizeof(s64) - 1))
 			= pf->timestamp;
@@ -163,12 +163,11 @@ static irqreturn_t lis3l02dq_trigger_handler(int irq, void *p)
 
 /* Caller responsible for locking as necessary. */
 static int
-__lis3l02dq_write_data_ready_config(struct device *dev, bool state)
+__lis3l02dq_write_data_ready_config(struct iio_dev *indio_dev, bool state)
 {
 	int ret;
 	u8 valold;
 	bool currentlyset;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct lis3l02dq_state *st = iio_priv(indio_dev);
 
 /* Get the current event mask register */
@@ -236,7 +235,7 @@ static int lis3l02dq_data_rdy_trigger_set_state(struct iio_trigger *trig,
 	int ret = 0;
 	u8 t;
 
-	__lis3l02dq_write_data_ready_config(&indio_dev->dev, state);
+	__lis3l02dq_write_data_ready_config(indio_dev, state);
 	if (state == false) {
 		/*
 		 * A possible quirk with the handler is currently worked around
@@ -286,7 +285,7 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct lis3l02dq_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("lis3l02dq-dev%d", indio_dev->id);
+	st->trig = iio_trigger_alloc("lis3l02dq-dev%d", indio_dev->id);
 	if (!st->trig) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -302,7 +301,7 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev)
 	return 0;
 
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -312,7 +311,7 @@ void lis3l02dq_remove_trigger(struct iio_dev *indio_dev)
 	struct lis3l02dq_state *st = iio_priv(indio_dev);
 
 	iio_trigger_unregister(st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
 
 void lis3l02dq_unconfigure_buffer(struct iio_dev *indio_dev)
diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c
index 49764fb7181c..6ec5c204ff1d 100644
--- a/drivers/staging/iio/accel/sca3000_core.c
+++ b/drivers/staging/iio/accel/sca3000_core.c
@@ -18,10 +18,10 @@
 #include <linux/spi/spi.h>
 #include <linux/sysfs.h>
 #include <linux/module.h>
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
 
 #include "sca3000.h"
 
@@ -241,7 +241,7 @@ error_ret:
 static int sca3000_check_status(struct device *dev)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->lock);
@@ -268,7 +268,7 @@ static ssize_t sca3000_show_rev(struct device *dev,
 				char *buf)
 {
 	int len = 0, ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->lock);
@@ -296,7 +296,7 @@ sca3000_show_available_measurement_modes(struct device *dev,
 					 struct device_attribute *attr,
 					 char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int len = 0;
 
@@ -328,7 +328,7 @@ sca3000_show_measurement_mode(struct device *dev,
 			      struct device_attribute *attr,
 			      char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int len = 0, ret;
 
@@ -379,7 +379,7 @@ sca3000_store_measurement_mode(struct device *dev,
 			       const char *buf,
 			       size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int ret;
 	u8 mask = 0x03;
@@ -429,17 +429,31 @@ static IIO_DEVICE_ATTR(measurement_mode, S_IRUGO | S_IWUSR,
 static IIO_DEVICE_ATTR(revision, S_IRUGO, sca3000_show_rev, NULL, 0);
 
 #define SCA3000_INFO_MASK			\
-	IIO_CHAN_INFO_SCALE_SHARED_BIT
+	IIO_CHAN_INFO_RAW_SEPARATE_BIT | IIO_CHAN_INFO_SCALE_SHARED_BIT
 #define SCA3000_EVENT_MASK					\
 	(IIO_EV_BIT(IIO_EV_TYPE_MAG, IIO_EV_DIR_RISING))
 
+#define SCA3000_CHAN(index, mod)				\
+	{							\
+		.type = IIO_ACCEL,				\
+		.modified = 1,					\
+		.channel2 = mod,				\
+		.info_mask = SCA3000_INFO_MASK,			\
+		.address = index,				\
+		.scan_index = index,				\
+		.scan_type = {					\
+			.sign = 's',				\
+			.realbits = 11,				\
+			.storagebits = 16,			\
+			.shift = 5,				\
+		},						\
+		.event_mask = SCA3000_EVENT_MASK,		\
+	 }
+
 static struct iio_chan_spec sca3000_channels[] = {
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_X, SCA3000_INFO_MASK,
-		 0, 0, IIO_ST('s', 11, 16, 5), SCA3000_EVENT_MASK),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Y, SCA3000_INFO_MASK,
-		 1, 1, IIO_ST('s', 11, 16, 5), SCA3000_EVENT_MASK),
-	IIO_CHAN(IIO_ACCEL, 1, 0, 0, NULL, 0, IIO_MOD_Z, SCA3000_INFO_MASK,
-		 2, 2, IIO_ST('s', 11, 16, 5), SCA3000_EVENT_MASK),
+	SCA3000_CHAN(0, IIO_MOD_X),
+	SCA3000_CHAN(1, IIO_MOD_Y),
+	SCA3000_CHAN(2, IIO_MOD_Z),
 };
 
 static u8 sca3000_addresses[3][3] = {
@@ -462,7 +476,7 @@ static int sca3000_read_raw(struct iio_dev *indio_dev,
 	u8 address;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&st->lock);
 		if (st->mo_det_use_count) {
 			mutex_unlock(&st->lock);
@@ -503,7 +517,7 @@ static ssize_t sca3000_read_av_freq(struct device *dev,
 			     struct device_attribute *attr,
 			     char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int len = 0, ret, val;
 
@@ -574,7 +588,7 @@ static ssize_t sca3000_read_frequency(struct device *dev,
 			       struct device_attribute *attr,
 			       char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int ret, len = 0, base_freq = 0, val;
 
@@ -616,7 +630,7 @@ static ssize_t sca3000_set_frequency(struct device *dev,
 			      const char *buf,
 			      size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int ret, base_freq = 0;
 	int ctrlval;
@@ -676,7 +690,7 @@ static ssize_t sca3000_read_temp(struct device *dev,
 				 struct device_attribute *attr,
 				 char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int ret;
 	int val;
@@ -897,7 +911,7 @@ static ssize_t sca3000_query_free_fall_mode(struct device *dev,
 					    char *buf)
 {
 	int ret, len;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	int val;
 
@@ -925,7 +939,7 @@ static ssize_t sca3000_set_free_fall_mode(struct device *dev,
 					  const char *buf,
 					  size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	long val;
 	int ret;
@@ -1131,7 +1145,7 @@ static int __devinit sca3000_probe(struct spi_device *spi)
 	struct sca3000_state *st;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -1195,7 +1209,7 @@ error_unregister_ring:
 error_unregister_dev:
 	iio_device_unregister(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -1233,7 +1247,7 @@ static int sca3000_remove(struct spi_device *spi)
 	iio_device_unregister(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	sca3000_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c
index 6b824a11f7f4..b7e1a002630a 100644
--- a/drivers/staging/iio/accel/sca3000_ring.c
+++ b/drivers/staging/iio/accel/sca3000_ring.c
@@ -18,9 +18,9 @@
 #include <linux/sched.h>
 #include <linux/poll.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 #include "../ring_hw.h"
 #include "sca3000.h"
 
@@ -157,7 +157,7 @@ static ssize_t sca3000_query_ring_int(struct device *dev,
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret, val;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->lock);
@@ -178,7 +178,7 @@ static ssize_t sca3000_set_ring_int(struct device *dev,
 				      const char *buf,
 				      size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	long val;
@@ -219,7 +219,7 @@ static ssize_t sca3000_show_buffer_scale(struct device *dev,
 					 struct device_attribute *attr,
 					 char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct sca3000_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "0.%06d\n", 4*st->info->scale);
diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index 592eabd85f36..2490dd25093b 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -25,7 +25,7 @@ config AD7606
 	depends on GPIOLIB
 	select IIO_BUFFER
 	select IIO_TRIGGER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	help
 	  Say yes here to build support for Analog Devices:
 	  ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
@@ -63,7 +63,7 @@ config AD799X_RING_BUFFER
 	bool "Analog Devices AD799x: use ring buffer"
 	depends on AD799X
 	select IIO_BUFFER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	help
 	  Say yes here to include ring buffer support in the AD799X
 	  ADC driver.
@@ -72,7 +72,7 @@ config AD7476
 	tristate "Analog Devices AD7475/6/7/8 AD7466/7/8 and AD7495 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	select IIO_TRIGGER
 	help
 	  Say yes here to build support for Analog Devices
@@ -87,7 +87,7 @@ config AD7887
 	tristate "Analog Devices AD7887 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	select IIO_TRIGGER
 	help
 	  Say yes here to build support for Analog Devices
@@ -113,7 +113,7 @@ config AD7793
 	tristate "Analog Devices AD7792 AD7793 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	select IIO_TRIGGER
 	help
 	  Say yes here to build support for Analog Devices
@@ -135,7 +135,7 @@ config AD7192
 	tristate "Analog Devices AD7190 AD7192 AD7195 ADC driver"
 	depends on SPI
 	select IIO_BUFFER
-	select IIO_SW_RING
+	select IIO_KFIFO_BUF
 	select IIO_TRIGGER
 	help
 	  Say yes here to build support for Analog Devices AD7190,
@@ -195,11 +195,20 @@ config MAX1363_RING_BUFFER
 
 config LPC32XX_ADC
 	tristate "NXP LPC32XX ADC"
-	depends on ARCH_LPC32XX && !TOUCHSCREEN_LPC32XX
+	depends on ARCH_LPC32XX
 	help
 	  Say yes here to build support for the integrated ADC inside the
 	  LPC32XX SoC. Note that this feature uses the same hardware as the
-	  touchscreen driver, so you can only select one of the two drivers
-	  (lpc32xx_adc or lpc32xx_ts). Provides direct access via sysfs.
+	  touchscreen driver, so you should either select only one of the two
+	  drivers (lpc32xx_adc or lpc32xx_ts) or, in the OpenFirmware case,
+	  activate only one via device tree selection.  Provides direct access
+	  via sysfs.
+
+config SPEAR_ADC
+	tristate "ST SPEAr ADC"
+	depends on PLAT_SPEAR
+	help
+	  Say yes here to build support for the integrated ADC inside the
+	  ST SPEAr SoC. Provides direct access via sysfs.
 
 endmenu
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index f83ab9551d8e..14e98b62b70a 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_ADT7310) += adt7310.o
 obj-$(CONFIG_ADT7410) += adt7410.o
 obj-$(CONFIG_AD7280) += ad7280a.o
 obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
+obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index 9fd6d63d2999..5eaeaf1f0ae8 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -1,7 +1,7 @@
 /*
  * AD7190 AD7192 AD7195 SPI ADC driver
  *
- * Copyright 2011 Analog Devices Inc.
+ * Copyright 2011-2012 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  */
@@ -17,12 +17,12 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7192.h"
 
@@ -456,31 +456,19 @@ out:
 static int ad7192_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad7192_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-	size_t d_size;
 	unsigned channel;
+	int ret;
 
 	if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		return -EINVAL;
 
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
+
 	channel = find_first_bit(indio_dev->active_scan_mask,
 				 indio_dev->masklength);
 
-	d_size = bitmap_weight(indio_dev->active_scan_mask,
-			       indio_dev->masklength) *
-		 indio_dev->channels[0].scan_type.storagebits / 8;
-
-	if (ring->scan_timestamp) {
-		d_size += sizeof(s64);
-
-		if (d_size % sizeof(s64))
-			d_size += sizeof(s64) - (d_size % sizeof(s64));
-	}
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, d_size);
-
 	st->mode  = (st->mode & ~AD7192_MODE_SEL(-1)) |
 		    AD7192_MODE_SEL(AD7192_MODE_CONT);
 	st->conf  = (st->conf & ~AD7192_CONF_CHAN(-1)) |
@@ -533,7 +521,7 @@ static irqreturn_t ad7192_trigger_handler(int irq, void *p)
 				  indio_dev->channels[0].scan_type.realbits/8);
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		dat64[1] = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)dat64, pf->timestamp);
@@ -556,7 +544,7 @@ static int ad7192_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	int ret;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -569,7 +557,7 @@ static int ad7192_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 						 indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
@@ -579,8 +567,8 @@ static int ad7192_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -588,7 +576,7 @@ error_ret:
 static void ad7192_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
 
 /**
@@ -616,7 +604,7 @@ static int ad7192_probe_trigger(struct iio_dev *indio_dev)
 	struct ad7192_state *st = iio_priv(indio_dev);
 	int ret;
 
-	st->trig = iio_allocate_trigger("%s-dev%d",
+	st->trig = iio_trigger_alloc("%s-dev%d",
 					spi_get_device_id(st->spi)->name,
 					indio_dev->id);
 	if (st->trig == NULL) {
@@ -649,7 +637,7 @@ static int ad7192_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->spi->irq, indio_dev);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -660,14 +648,14 @@ static void ad7192_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->spi->irq, indio_dev);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
 
 static ssize_t ad7192_read_frequency(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", st->mclk /
@@ -679,7 +667,7 @@ static ssize_t ad7192_write_frequency(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 	unsigned long lval;
 	int div, ret;
@@ -718,7 +706,7 @@ static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
 static ssize_t ad7192_show_scale_available(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 	int i, len = 0;
 
@@ -742,7 +730,7 @@ static ssize_t ad7192_show_ac_excitation(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX));
@@ -752,7 +740,7 @@ static ssize_t ad7192_show_bridge_switch(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW));
@@ -763,7 +751,7 @@ static ssize_t ad7192_set(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
@@ -849,7 +837,7 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
 	bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR);
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -981,7 +969,8 @@ static const struct iio_info ad7195_info = {
 	  .extend_name = _name,						\
 	  .channel = _chan,						\
 	  .channel2 = _chan2,						\
-	  .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
+	  .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |			\
+	  IIO_CHAN_INFO_SCALE_SHARED_BIT,				\
 	  .address = _address,						\
 	  .scan_index = _si,						\
 	  .scan_type =  IIO_ST('s', 24, 32, 0)}
@@ -990,7 +979,8 @@ static const struct iio_info ad7195_info = {
 	{ .type = IIO_VOLTAGE,						\
 	  .indexed = 1,							\
 	  .channel = _chan,						\
-	  .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
+	  .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |			\
+	  IIO_CHAN_INFO_SCALE_SHARED_BIT,				\
 	  .address = _address,						\
 	  .scan_index = _si,						\
 	  .scan_type =  IIO_ST('s', 24, 32, 0)}
@@ -999,7 +989,8 @@ static const struct iio_info ad7195_info = {
 	{ .type = IIO_TEMP,						\
 	  .indexed = 1,							\
 	  .channel = _chan,						\
-	  .info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
+	  .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |			\
+	  IIO_CHAN_INFO_SCALE_SEPARATE_BIT,				\
 	  .address = _address,						\
 	  .scan_index = _si,						\
 	  .scan_type =  IIO_ST('s', 24, 32, 0)}
@@ -1033,7 +1024,7 @@ static int __devinit ad7192_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -1114,7 +1105,7 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
diff --git a/drivers/staging/iio/adc/ad7280a.c b/drivers/staging/iio/adc/ad7280a.c
index 7dbd6812c240..cfc39a703126 100644
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -16,9 +16,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 #include "ad7280a.h"
 
@@ -384,7 +384,7 @@ static ssize_t ad7280_show_balance_sw(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7280_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -398,7 +398,7 @@ static ssize_t ad7280_store_balance_sw(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7280_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	bool readin;
@@ -429,7 +429,7 @@ static ssize_t ad7280_show_balance_timer(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7280_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
@@ -453,7 +453,7 @@ static ssize_t ad7280_store_balance_timer(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7280_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	unsigned long val;
@@ -508,6 +508,7 @@ static int ad7280_channel_init(struct ad7280_state *st)
 			}
 			st->channels[cnt].indexed = 1;
 			st->channels[cnt].info_mask =
+				IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 				IIO_CHAN_INFO_SCALE_SHARED_BIT;
 			st->channels[cnt].address =
 				AD7280A_DEVADDR(dev) << 8 | ch;
@@ -524,7 +525,9 @@ static int ad7280_channel_init(struct ad7280_state *st)
 	st->channels[cnt].channel2 = dev * 6;
 	st->channels[cnt].address = AD7280A_ALL_CELLS;
 	st->channels[cnt].indexed = 1;
-	st->channels[cnt].info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT;
+	st->channels[cnt].info_mask =
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT;
 	st->channels[cnt].scan_index = cnt;
 	st->channels[cnt].scan_type.sign = 'u';
 	st->channels[cnt].scan_type.realbits = 32;
@@ -596,7 +599,7 @@ static ssize_t ad7280_read_channel_config(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7280_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	unsigned val;
@@ -626,7 +629,7 @@ static ssize_t ad7280_write_channel_config(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7280_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -788,7 +791,7 @@ static int ad7280_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (chan->address == AD7280A_ALL_CELLS)
 			ret = ad7280_read_all_channels(st, st->scan_cnt, NULL);
@@ -836,7 +839,7 @@ static int __devinit ad7280_probe(struct spi_device *spi)
 	int ret;
 	const unsigned short tACQ_ns[4] = {465, 1010, 1460, 1890};
 	const unsigned short nAVG[4] = {1, 2, 4, 8};
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL)
 		return -ENOMEM;
@@ -942,7 +945,7 @@ error_free_channels:
 	kfree(st->channels);
 
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -961,7 +964,7 @@ static int __devexit ad7280_remove(struct spi_device *spi)
 
 	kfree(st->channels);
 	kfree(st->iio_attr);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7291.c b/drivers/staging/iio/adc/ad7291.c
index 81d6b6128cb0..029b39c0ba60 100644
--- a/drivers/staging/iio/adc/ad7291.c
+++ b/drivers/staging/iio/adc/ad7291.c
@@ -17,9 +17,9 @@
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 /*
  * Simplified handling
@@ -132,7 +132,7 @@ static ssize_t ad7291_store_reset(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7291_chip_info *chip = iio_priv(indio_dev);
 
 	return ad7291_i2c_write(chip, AD7291_COMMAND,
@@ -214,7 +214,7 @@ static inline ssize_t ad7291_show_hyst(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7291_chip_info *chip = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	u16 data;
@@ -232,7 +232,7 @@ static inline ssize_t ad7291_set_hyst(struct device *dev,
 				      const char *buf,
 				      size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7291_chip_info *chip = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	u16 data;
@@ -461,7 +461,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
 	s16 signval;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		switch (chan->type) {
 		case IIO_VOLTAGE:
 			mutex_lock(&chip->state_lock);
@@ -536,7 +536,8 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
 #define AD7291_VOLTAGE_CHAN(_chan)					\
 {									\
 	.type = IIO_VOLTAGE,						\
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |			\
+	IIO_CHAN_INFO_SCALE_SHARED_BIT,					\
 	.indexed = 1,							\
 	.channel = _chan,						\
 	.event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)|\
@@ -554,7 +555,8 @@ static const struct iio_chan_spec ad7291_channels[] = {
 	AD7291_VOLTAGE_CHAN(7),
 	{
 		.type = IIO_TEMP,
-		.info_mask = IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT |
 				IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.indexed = 1,
 		.channel = 0,
@@ -585,7 +587,7 @@ static int __devinit ad7291_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	int ret = 0, voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -667,7 +669,7 @@ error_put_reg:
 	if (!IS_ERR(chip->reg))
 		regulator_put(chip->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -687,7 +689,7 @@ static int __devexit ad7291_remove(struct i2c_client *client)
 		regulator_put(chip->reg);
 	}
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7298.h b/drivers/staging/iio/adc/ad7298.h
index a0e5dea415ef..5051a7e4d4fd 100644
--- a/drivers/staging/iio/adc/ad7298.h
+++ b/drivers/staging/iio/adc/ad7298.h
@@ -38,7 +38,6 @@ struct ad7298_platform_data {
 struct ad7298_state {
 	struct spi_device		*spi;
 	struct regulator		*reg;
-	size_t				d_size;
 	u16				int_vref_mv;
 	unsigned			ext_ref;
 	struct spi_transfer		ring_xfer[10];
diff --git a/drivers/staging/iio/adc/ad7298_core.c b/drivers/staging/iio/adc/ad7298_core.c
index 8dd6aa9cf928..c90f2b3e661f 100644
--- a/drivers/staging/iio/adc/ad7298_core.c
+++ b/drivers/staging/iio/adc/ad7298_core.c
@@ -16,40 +16,51 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "ad7298.h"
 
+#define AD7298_V_CHAN(index)						\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = index,					\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,				\
+		.address = index,					\
+		.scan_index = index,					\
+		.scan_type = {						\
+			.sign = 'u',					\
+			.realbits = 12,					\
+			.storagebits = 16,				\
+		},							\
+	}
+
 static struct iio_chan_spec ad7298_channels[] = {
-	IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 9, AD7298_CH_TEMP, IIO_ST('s', 32, 32, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 0, 0, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 1, 1, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 2, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 2, 2, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 3, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 3, 3, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 4, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 4, 4, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 5, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 5, 5, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 6, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 6, 6, IIO_ST('u', 12, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 7, 0,
-		 IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		 7, 7, IIO_ST('u', 12, 16, 0), 0),
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = 9,
+		.scan_index = AD7298_CH_TEMP,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 32,
+			.storagebits = 32,
+		},
+	},
+	AD7298_V_CHAN(0),
+	AD7298_V_CHAN(1),
+	AD7298_V_CHAN(2),
+	AD7298_V_CHAN(3),
+	AD7298_V_CHAN(4),
+	AD7298_V_CHAN(5),
+	AD7298_V_CHAN(6),
+	AD7298_V_CHAN(7),
 	IIO_CHAN_SOFT_TIMESTAMP(8),
 };
 
@@ -121,7 +132,7 @@ static int ad7298_read_raw(struct iio_dev *indio_dev,
 	unsigned int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
 			ret = -EBUSY;
@@ -168,7 +179,7 @@ static int __devinit ad7298_probe(struct spi_device *spi)
 	struct ad7298_platform_data *pdata = spi->dev.platform_data;
 	struct ad7298_state *st;
 	int ret;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL)
 		return -ENOMEM;
@@ -241,7 +252,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -258,7 +269,7 @@ static int __devexit ad7298_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7298_ring.c b/drivers/staging/iio/adc/ad7298_ring.c
index feeb0eeba59a..908a3e5609df 100644
--- a/drivers/staging/iio/adc/ad7298_ring.c
+++ b/drivers/staging/iio/adc/ad7298_ring.c
@@ -1,7 +1,7 @@
 /*
  * AD7298 SPI ADC driver
  *
- * Copyright 2011 Analog Devices Inc.
+ * Copyright 2011-2012 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  */
@@ -11,10 +11,10 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 
-#include "../iio.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7298.h"
 
@@ -28,25 +28,17 @@
 static int ad7298_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad7298_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-	size_t d_size;
 	int i, m;
 	unsigned short command;
-	int scan_count = bitmap_weight(indio_dev->active_scan_mask,
-				       indio_dev->masklength);
-	d_size = scan_count * (AD7298_STORAGE_BITS / 8);
-
-	if (ring->scan_timestamp) {
-		d_size += sizeof(s64);
-
-		if (d_size % sizeof(s64))
-			d_size += sizeof(s64) - (d_size % sizeof(s64));
-	}
+	int scan_count, ret;
 
-	if (ring->access->set_bytes_per_datum)
-		ring->access->set_bytes_per_datum(ring, d_size);
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
 
-	st->d_size = d_size;
+	/* Now compute overall size */
+	scan_count = bitmap_weight(indio_dev->active_scan_mask,
+				   indio_dev->masklength);
 
 	command = AD7298_WRITE | st->ext_ref;
 
@@ -100,9 +92,9 @@ static irqreturn_t ad7298_trigger_handler(int irq, void *p)
 	if (b_sent)
 		return b_sent;
 
-	if (ring->scan_timestamp) {
+	if (indio_dev->scan_timestamp) {
 		time_ns = iio_get_time_ns();
-		memcpy((u8 *)buf + st->d_size - sizeof(s64),
+		memcpy((u8 *)buf + indio_dev->scan_bytes - sizeof(s64),
 			&time_ns, sizeof(time_ns));
 	}
 
@@ -126,7 +118,7 @@ int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	int ret;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -140,7 +132,7 @@ int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
@@ -151,8 +143,8 @@ int ad7298_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -160,5 +152,5 @@ error_ret:
 void ad7298_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/adc/ad7476.h b/drivers/staging/iio/adc/ad7476.h
index 27f696c75cc4..b1dd9317fe1f 100644
--- a/drivers/staging/iio/adc/ad7476.h
+++ b/drivers/staging/iio/adc/ad7476.h
@@ -27,7 +27,6 @@ struct ad7476_state {
 	struct spi_device		*spi;
 	const struct ad7476_chip_info	*chip_info;
 	struct regulator		*reg;
-	size_t				d_size;
 	u16				int_vref_mv;
 	struct spi_transfer		xfer;
 	struct spi_message		msg;
diff --git a/drivers/staging/iio/adc/ad7476_core.c b/drivers/staging/iio/adc/ad7476_core.c
index 0c064d1c3927..be1c260cf165 100644
--- a/drivers/staging/iio/adc/ad7476_core.c
+++ b/drivers/staging/iio/adc/ad7476_core.c
@@ -15,9 +15,9 @@
 #include <linux/err.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "ad7476.h"
 
@@ -43,7 +43,7 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 	unsigned int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -66,53 +66,51 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
+#define AD7476_CHAN(bits)					\
+	{							\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+	IIO_CHAN_INFO_SCALE_SHARED_BIT,				\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = bits,				\
+		.storagebits = 16,				\
+		.shift = 12 - bits,				\
+	},							\
+}
+
 static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
 	[ID_AD7466] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 12, 16, 0), 0),
+		.channel[0] = AD7476_CHAN(12),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7467] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 10, 16, 2), 0),
+		.channel[0] = AD7476_CHAN(10),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7468] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1 , 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 8, 16, 4), 0),
+		.channel[0] = AD7476_CHAN(8),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7475] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 12, 16, 0), 0),
+		.channel[0] = AD7476_CHAN(12),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7476] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 12, 16, 0), 0),
+		.channel[0] = AD7476_CHAN(12),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7477] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 10, 16, 2), 0),
+		.channel[0] = AD7476_CHAN(10),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7478] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 8, 16, 4), 0),
+		.channel[0] = AD7476_CHAN(8),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 	},
 	[ID_AD7495] = {
-		.channel[0] = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				       IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				       0, 0, IIO_ST('u', 12, 16, 0), 0),
+		.channel[0] = AD7476_CHAN(12),
 		.channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
 		.int_vref_mv = 2500,
 	},
@@ -130,7 +128,7 @@ static int __devinit ad7476_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	int ret, voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -200,7 +198,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -218,7 +216,7 @@ static int ad7476_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7476_ring.c b/drivers/staging/iio/adc/ad7476_ring.c
index d6af6c05ce1c..383611b05764 100644
--- a/drivers/staging/iio/adc/ad7476_ring.c
+++ b/drivers/staging/iio/adc/ad7476_ring.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Analog Devices Inc.
+ * Copyright 2010-2012 Analog Devices Inc.
  * Copyright (C) 2008 Jonathan Cameron
  *
  * Licensed under the GPL-2 or later.
@@ -13,43 +13,13 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 
-#include "../iio.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7476.h"
 
-/**
- * ad7476_ring_preenable() setup the parameters of the ring before enabling
- *
- * The complex nature of the setting of the number of bytes per datum is due
- * to this driver currently ensuring that the timestamp is stored at an 8
- * byte boundary.
- **/
-static int ad7476_ring_preenable(struct iio_dev *indio_dev)
-{
-	struct ad7476_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-
-	st->d_size = bitmap_weight(indio_dev->active_scan_mask,
-				   indio_dev->masklength) *
-		st->chip_info->channel[0].scan_type.storagebits / 8;
-
-	if (ring->scan_timestamp) {
-		st->d_size += sizeof(s64);
-
-		if (st->d_size % sizeof(s64))
-			st->d_size += sizeof(s64) - (st->d_size % sizeof(s64));
-	}
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, st->d_size);
-
-	return 0;
-}
-
 static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 {
 	struct iio_poll_func *pf = p;
@@ -59,7 +29,7 @@ static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 	__u8 *rxbuf;
 	int b_sent;
 
-	rxbuf = kzalloc(st->d_size, GFP_KERNEL);
+	rxbuf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (rxbuf == NULL)
 		return -ENOMEM;
 
@@ -70,8 +40,8 @@ static irqreturn_t ad7476_trigger_handler(int irq, void  *p)
 
 	time_ns = iio_get_time_ns();
 
-	if (indio_dev->buffer->scan_timestamp)
-		memcpy(rxbuf + st->d_size - sizeof(s64),
+	if (indio_dev->scan_timestamp)
+		memcpy(rxbuf + indio_dev->scan_bytes - sizeof(s64),
 			&time_ns, sizeof(time_ns));
 
 	indio_dev->buffer->access->store_to(indio_dev->buffer, rxbuf, time_ns);
@@ -83,7 +53,7 @@ done:
 }
 
 static const struct iio_buffer_setup_ops ad7476_ring_setup_ops = {
-	.preenable = &ad7476_ring_preenable,
+	.preenable = &iio_sw_buffer_preenable,
 	.postenable = &iio_triggered_buffer_postenable,
 	.predisable = &iio_triggered_buffer_predisable,
 };
@@ -93,7 +63,7 @@ int ad7476_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	struct ad7476_state *st = iio_priv(indio_dev);
 	int ret = 0;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -108,7 +78,7 @@ int ad7476_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 				     indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
@@ -119,8 +89,8 @@ int ad7476_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -128,5 +98,5 @@ error_ret:
 void ad7476_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/adc/ad7606_core.c b/drivers/staging/iio/adc/ad7606_core.c
index 97e8d3d4471e..10ab6dc823b9 100644
--- a/drivers/staging/iio/adc/ad7606_core.c
+++ b/drivers/staging/iio/adc/ad7606_core.c
@@ -18,9 +18,9 @@
 #include <linux/sched.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "ad7606.h"
 
@@ -88,7 +88,7 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
 	unsigned int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -113,7 +113,7 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
 static ssize_t ad7606_show_range(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7606_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%u\n", st->range);
@@ -122,7 +122,7 @@ static ssize_t ad7606_show_range(struct device *dev,
 static ssize_t ad7606_store_range(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7606_state *st = iio_priv(indio_dev);
 	unsigned long lval;
 
@@ -147,7 +147,7 @@ static IIO_CONST_ATTR(in_voltage_range_available, "5000 10000");
 static ssize_t ad7606_show_oversampling_ratio(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7606_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%u\n", st->oversampling);
@@ -168,7 +168,7 @@ static int ad7606_oversampling_get_index(unsigned val)
 static ssize_t ad7606_store_oversampling_ratio(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7606_state *st = iio_priv(indio_dev);
 	unsigned long lval;
 	int ret;
@@ -229,14 +229,15 @@ static const struct attribute_group ad7606_attribute_group_range = {
 	.attrs = ad7606_attributes_range,
 };
 
-#define AD7606_CHANNEL(num)				\
-	{						\
-		.type = IIO_VOLTAGE,			\
-		.indexed = 1,				\
-		.channel = num,				\
-		.address = num,				\
-		.scan_index = num,			\
-		.scan_type = IIO_ST('s', 16, 16, 0),	\
+#define AD7606_CHANNEL(num)					\
+	{							\
+		.type = IIO_VOLTAGE,				\
+		.indexed = 1,					\
+		.channel = num,					\
+		.address = num,					\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
+		.scan_index = num,				\
+		.scan_type = IIO_ST('s', 16, 16, 0),		\
 	}
 
 static struct iio_chan_spec ad7606_8_channels[] = {
@@ -460,7 +461,7 @@ struct iio_dev *ad7606_probe(struct device *dev, int irq,
 	struct ad7606_platform_data *pdata = dev->platform_data;
 	struct ad7606_state *st;
 	int ret;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
@@ -559,7 +560,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ERR_PTR(ret);
 }
@@ -579,7 +580,7 @@ int ad7606_remove(struct iio_dev *indio_dev, int irq)
 	}
 
 	ad7606_free_gpios(st);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7606_par.c b/drivers/staging/iio/adc/ad7606_par.c
index bb152a8e8c92..a53faafec070 100644
--- a/drivers/staging/iio/adc/ad7606_par.c
+++ b/drivers/staging/iio/adc/ad7606_par.c
@@ -12,7 +12,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "ad7606.h"
 
 static int ad7606_par16_read_block(struct device *dev,
diff --git a/drivers/staging/iio/adc/ad7606_ring.c b/drivers/staging/iio/adc/ad7606_ring.c
index 1ef9fbcaf2de..24ce8fc71646 100644
--- a/drivers/staging/iio/adc/ad7606_ring.c
+++ b/drivers/staging/iio/adc/ad7606_ring.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Analog Devices Inc.
+ * Copyright 2011-2012 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  *
@@ -11,10 +11,10 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7606.h"
 
@@ -51,8 +51,7 @@ static void ad7606_poll_bh_to_ring(struct work_struct *work_s)
 	__u8 *buf;
 	int ret;
 
-	buf = kzalloc(ring->access->get_bytes_per_datum(ring),
-		      GFP_KERNEL);
+	buf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (buf == NULL)
 		return;
 
@@ -82,9 +81,8 @@ static void ad7606_poll_bh_to_ring(struct work_struct *work_s)
 
 	time_ns = iio_get_time_ns();
 
-	if (ring->scan_timestamp)
-		*((s64 *)(buf + ring->access->get_bytes_per_datum(ring) -
-			  sizeof(s64))) = time_ns;
+	if (indio_dev->scan_timestamp)
+		*((s64 *)(buf + indio_dev->scan_bytes - sizeof(s64))) = time_ns;
 
 	ring->access->store_to(indio_dev->buffer, buf, time_ns);
 done:
@@ -104,7 +102,7 @@ int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	struct ad7606_state *st = iio_priv(indio_dev);
 	int ret;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -119,13 +117,13 @@ int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 						 indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
 
 	indio_dev->setup_ops = &ad7606_ring_setup_ops;
-	indio_dev->buffer->scan_timestamp = true ;
+	indio_dev->buffer->scan_timestamp = true;
 
 	INIT_WORK(&st->poll_work, &ad7606_poll_bh_to_ring);
 
@@ -133,8 +131,8 @@ int ad7606_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -142,5 +140,5 @@ error_ret:
 void ad7606_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/adc/ad7606_spi.c b/drivers/staging/iio/adc/ad7606_spi.c
index 237f1c44d296..099d347da52d 100644
--- a/drivers/staging/iio/adc/ad7606_spi.c
+++ b/drivers/staging/iio/adc/ad7606_spi.c
@@ -11,7 +11,7 @@
 #include <linux/types.h>
 #include <linux/err.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "ad7606.h"
 
 #define MAX_SPI_FREQ_HZ		23500000	/* VDRIVE above 4.75 V */
diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c
index a13e58c814e6..1ece2ac8de56 100644
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -18,8 +18,8 @@
 #include <linux/gpio.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #include "ad7780.h"
 
@@ -94,7 +94,7 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
 	unsigned long scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		ret = ad7780_read(st, &smpl);
 		mutex_unlock(&indio_dev->mlock);
@@ -126,14 +126,34 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
 
 static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
 	[ID_AD7780] = {
-		.channel = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				    IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				    0, 0, IIO_ST('s', 24, 32, 8), 0),
+		.channel = {
+			.type = IIO_VOLTAGE,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.scan_type = {
+				.sign = 's',
+				.realbits = 24,
+				.storagebits = 32,
+				.shift = 8,
+			},
+		},
 	},
 	[ID_AD7781] = {
-		.channel = IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 0, 0,
-				    IIO_CHAN_INFO_SCALE_SHARED_BIT,
-				    0, 0, IIO_ST('s', 20, 32, 12), 0),
+		.channel = {
+			.type = IIO_VOLTAGE,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.scan_type = {
+				.sign = 's',
+				.realbits = 20,
+				.storagebits = 32,
+				.shift = 12,
+			},
+		},
 	},
 };
 
@@ -167,7 +187,7 @@ static int __devinit ad7780_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -245,7 +265,7 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -262,7 +282,7 @@ static int ad7780_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c
index 84ecde1ad042..b36556fa2957 100644
--- a/drivers/staging/iio/adc/ad7793.c
+++ b/drivers/staging/iio/adc/ad7793.c
@@ -1,7 +1,7 @@
 /*
  * AD7792/AD7793 SPI ADC driver
  *
- * Copyright 2011 Analog Devices Inc.
+ * Copyright 2011-2012 Analog Devices Inc.
  *
  * Licensed under the GPL-2.
  */
@@ -18,12 +18,12 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7793.h"
 
@@ -319,31 +319,18 @@ out:
 static int ad7793_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad7793_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-	size_t d_size;
 	unsigned channel;
+	int ret;
 
 	if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		return -EINVAL;
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
 
 	channel = find_first_bit(indio_dev->active_scan_mask,
 				 indio_dev->masklength);
 
-	d_size = bitmap_weight(indio_dev->active_scan_mask,
-			       indio_dev->masklength) *
-		indio_dev->channels[0].scan_type.storagebits / 8;
-
-	if (ring->scan_timestamp) {
-		d_size += sizeof(s64);
-
-		if (d_size % sizeof(s64))
-			d_size += sizeof(s64) - (d_size % sizeof(s64));
-	}
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, d_size);
-
 	st->mode  = (st->mode & ~AD7793_MODE_SEL(-1)) |
 		    AD7793_MODE_SEL(AD7793_MODE_CONT);
 	st->conf  = (st->conf & ~AD7793_CONF_CHAN(-1)) |
@@ -399,7 +386,7 @@ static irqreturn_t ad7793_trigger_handler(int irq, void *p)
 				  indio_dev->channels[0].scan_type.realbits/8);
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		dat64[1] = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)dat64, pf->timestamp);
@@ -422,7 +409,7 @@ static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	int ret;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -435,7 +422,7 @@ static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 						 indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
@@ -445,8 +432,8 @@ static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -454,7 +441,7 @@ error_ret:
 static void ad7793_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
 
 /**
@@ -482,7 +469,7 @@ static int ad7793_probe_trigger(struct iio_dev *indio_dev)
 	struct ad7793_state *st = iio_priv(indio_dev);
 	int ret;
 
-	st->trig = iio_allocate_trigger("%s-dev%d",
+	st->trig = iio_trigger_alloc("%s-dev%d",
 					spi_get_device_id(st->spi)->name,
 					indio_dev->id);
 	if (st->trig == NULL) {
@@ -516,7 +503,7 @@ static int ad7793_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->spi->irq, indio_dev);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -527,7 +514,7 @@ static void ad7793_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->spi->irq, indio_dev);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
 
 static const u16 sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, 33, 19,
@@ -537,7 +524,7 @@ static ssize_t ad7793_read_frequency(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7793_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n",
@@ -549,7 +536,7 @@ static ssize_t ad7793_write_frequency(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7793_state *st = iio_priv(indio_dev);
 	long lval;
 	int i, ret;
@@ -591,7 +578,7 @@ static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
 static ssize_t ad7793_show_scale_available(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7793_state *st = iio_priv(indio_dev);
 	int i, len = 0;
 
@@ -630,7 +617,7 @@ static int ad7793_read_raw(struct iio_dev *indio_dev,
 	bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR);
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -760,7 +747,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 0,
 			.channel2 = 0,
 			.address = AD7793_CH_AIN1P_AIN1M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 0,
 			.scan_type = IIO_ST('s', 24, 32, 0)
 		},
@@ -771,7 +759,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 1,
 			.channel2 = 1,
 			.address = AD7793_CH_AIN2P_AIN2M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 1,
 			.scan_type = IIO_ST('s', 24, 32, 0)
 		},
@@ -782,7 +771,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 2,
 			.channel2 = 2,
 			.address = AD7793_CH_AIN3P_AIN3M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 2,
 			.scan_type = IIO_ST('s', 24, 32, 0)
 		},
@@ -794,7 +784,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 2,
 			.channel2 = 2,
 			.address = AD7793_CH_AIN1M_AIN1M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 2,
 			.scan_type = IIO_ST('s', 24, 32, 0)
 		},
@@ -803,7 +794,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.indexed = 1,
 			.channel = 0,
 			.address = AD7793_CH_TEMP,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 			.scan_index = 4,
 			.scan_type = IIO_ST('s', 24, 32, 0),
 		},
@@ -813,7 +805,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.indexed = 1,
 			.channel = 4,
 			.address = AD7793_CH_AVDD_MONITOR,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 			.scan_index = 5,
 			.scan_type = IIO_ST('s', 24, 32, 0),
 		},
@@ -827,7 +820,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 0,
 			.channel2 = 0,
 			.address = AD7793_CH_AIN1P_AIN1M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 0,
 			.scan_type = IIO_ST('s', 16, 32, 0)
 		},
@@ -838,7 +832,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 1,
 			.channel2 = 1,
 			.address = AD7793_CH_AIN2P_AIN2M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 1,
 			.scan_type = IIO_ST('s', 16, 32, 0)
 		},
@@ -849,7 +844,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 2,
 			.channel2 = 2,
 			.address = AD7793_CH_AIN3P_AIN3M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 2,
 			.scan_type = IIO_ST('s', 16, 32, 0)
 		},
@@ -861,7 +857,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.channel = 2,
 			.channel2 = 2,
 			.address = AD7793_CH_AIN1M_AIN1M,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.scan_index = 2,
 			.scan_type = IIO_ST('s', 16, 32, 0)
 		},
@@ -870,7 +867,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.indexed = 1,
 			.channel = 0,
 			.address = AD7793_CH_TEMP,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 			.scan_index = 4,
 			.scan_type = IIO_ST('s', 16, 32, 0),
 		},
@@ -880,7 +878,8 @@ static const struct ad7793_chip_info ad7793_chip_info_tbl[] = {
 			.indexed = 1,
 			.channel = 4,
 			.address = AD7793_CH_AVDD_MONITOR,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 			.scan_index = 5,
 			.scan_type = IIO_ST('s', 16, 32, 0),
 		},
@@ -905,7 +904,7 @@ static int __devinit ad7793_probe(struct spi_device *spi)
 		return -ENODEV;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -989,7 +988,7 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -1009,7 +1008,7 @@ static int ad7793_remove(struct spi_device *spi)
 		regulator_put(st->reg);
 	}
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c
index 52b720e2b03a..5356b091b08f 100644
--- a/drivers/staging/iio/adc/ad7816.c
+++ b/drivers/staging/iio/adc/ad7816.c
@@ -16,9 +16,9 @@
 #include <linux/spi/spi.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 /*
  * AD7816 config masks
@@ -113,7 +113,7 @@ static ssize_t ad7816_show_mode(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 
 	if (chip->mode)
@@ -127,7 +127,7 @@ static ssize_t ad7816_store_mode(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 
 	if (strcmp(buf, "full")) {
@@ -159,7 +159,7 @@ static ssize_t ad7816_show_channel(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", chip->channel_id);
@@ -170,7 +170,7 @@ static ssize_t ad7816_store_channel(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 	unsigned long data;
 	int ret;
@@ -208,7 +208,7 @@ static ssize_t ad7816_show_value(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 	u16 data;
 	s8 value;
@@ -263,7 +263,7 @@ static ssize_t ad7816_show_oti(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 	int value;
 
@@ -284,7 +284,7 @@ static inline ssize_t ad7816_set_oti(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 	long value;
 	u8 data;
@@ -354,7 +354,7 @@ static int __devinit ad7816_probe(struct spi_device *spi_dev)
 		return -EINVAL;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -426,7 +426,7 @@ error_free_gpio_convert:
 error_free_gpio_rdwr:
 	gpio_free(chip->rdwr_pin);
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -443,7 +443,7 @@ static int __devexit ad7816_remove(struct spi_device *spi_dev)
 	gpio_free(chip->busy_pin);
 	gpio_free(chip->convert_pin);
 	gpio_free(chip->rdwr_pin);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7887.h b/drivers/staging/iio/adc/ad7887.h
index bc53b6532121..2e09e54fc9c5 100644
--- a/drivers/staging/iio/adc/ad7887.h
+++ b/drivers/staging/iio/adc/ad7887.h
@@ -63,7 +63,6 @@ struct ad7887_state {
 	struct spi_device		*spi;
 	const struct ad7887_chip_info	*chip_info;
 	struct regulator		*reg;
-	size_t				d_size;
 	u16				int_vref_mv;
 	struct spi_transfer		xfer[4];
 	struct spi_message		msg[3];
diff --git a/drivers/staging/iio/adc/ad7887_core.c b/drivers/staging/iio/adc/ad7887_core.c
index e9bbc3eed15d..7186074deeb3 100644
--- a/drivers/staging/iio/adc/ad7887_core.c
+++ b/drivers/staging/iio/adc/ad7887_core.c
@@ -15,9 +15,9 @@
 #include <linux/err.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 
 #include "ad7887.h"
@@ -42,7 +42,7 @@ static int ad7887_read_raw(struct iio_dev *indio_dev,
 	unsigned int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -75,7 +75,8 @@ static const struct ad7887_chip_info ad7887_chip_info_tbl[] = {
 			.type = IIO_VOLTAGE,
 			.indexed = 1,
 			.channel = 1,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.address = 1,
 			.scan_index = 1,
 			.scan_type = IIO_ST('u', 12, 16, 0),
@@ -84,7 +85,8 @@ static const struct ad7887_chip_info ad7887_chip_info_tbl[] = {
 			.type = IIO_VOLTAGE,
 			.indexed = 1,
 			.channel = 0,
-			.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT,
 			.address = 0,
 			.scan_index = 0,
 			.scan_type = IIO_ST('u', 12, 16, 0),
@@ -104,7 +106,7 @@ static int __devinit ad7887_probe(struct spi_device *spi)
 	struct ad7887_platform_data *pdata = spi->dev.platform_data;
 	struct ad7887_state *st;
 	int ret, voltage_uv = 0;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL)
 		return -ENOMEM;
@@ -220,7 +222,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -237,7 +239,7 @@ static int ad7887_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad7887_ring.c b/drivers/staging/iio/adc/ad7887_ring.c
index d1809079b63d..fd91384db894 100644
--- a/drivers/staging/iio/adc/ad7887_ring.c
+++ b/drivers/staging/iio/adc/ad7887_ring.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010-2011 Analog Devices Inc.
+ * Copyright 2010-2012 Analog Devices Inc.
  * Copyright (C) 2008 Jonathan Cameron
  *
  * Licensed under the GPL-2.
@@ -12,10 +12,10 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 
-#include "../iio.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad7887.h"
 
@@ -29,22 +29,11 @@
 static int ad7887_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad7887_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-
-	st->d_size = bitmap_weight(indio_dev->active_scan_mask,
-				   indio_dev->masklength) *
-		st->chip_info->channel[0].scan_type.storagebits / 8;
-
-	if (ring->scan_timestamp) {
-		st->d_size += sizeof(s64);
-
-		if (st->d_size % sizeof(s64))
-			st->d_size += sizeof(s64) - (st->d_size % sizeof(s64));
-	}
+	int ret;
 
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, st->d_size);
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
 
 	/* We know this is a single long so can 'cheat' */
 	switch (*indio_dev->active_scan_mask) {
@@ -83,7 +72,6 @@ static irqreturn_t ad7887_trigger_handler(int irq, void *p)
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ad7887_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
 	s64 time_ns;
 	__u8 *buf;
 	int b_sent;
@@ -92,7 +80,7 @@ static irqreturn_t ad7887_trigger_handler(int irq, void *p)
 					   indio_dev->masklength) *
 		st->chip_info->channel[0].scan_type.storagebits / 8;
 
-	buf = kzalloc(st->d_size, GFP_KERNEL);
+	buf = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (buf == NULL)
 		return -ENOMEM;
 
@@ -103,8 +91,8 @@ static irqreturn_t ad7887_trigger_handler(int irq, void *p)
 	time_ns = iio_get_time_ns();
 
 	memcpy(buf, st->data, bytes);
-	if (ring->scan_timestamp)
-		memcpy(buf + st->d_size - sizeof(s64),
+	if (indio_dev->scan_timestamp)
+		memcpy(buf + indio_dev->scan_bytes - sizeof(s64),
 		       &time_ns, sizeof(time_ns));
 
 	indio_dev->buffer->access->store_to(indio_dev->buffer, buf, time_ns);
@@ -126,7 +114,7 @@ int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	int ret;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -139,7 +127,7 @@ int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 						 indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 	/* Ring buffer functions - here trigger setup related */
 	indio_dev->setup_ops = &ad7887_ring_setup_ops;
@@ -148,8 +136,8 @@ int ad7887_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -157,5 +145,5 @@ error_ret:
 void ad7887_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/adc/ad799x.h b/drivers/staging/iio/adc/ad799x.h
index 356f690a76fb..99f8abe9731b 100644
--- a/drivers/staging/iio/adc/ad799x.h
+++ b/drivers/staging/iio/adc/ad799x.h
@@ -104,7 +104,6 @@ struct ad799x_chip_info {
 struct ad799x_state {
 	struct i2c_client		*client;
 	const struct ad799x_chip_info	*chip_info;
-	size_t				d_size;
 	struct iio_trigger		*trig;
 	struct regulator		*reg;
 	u16				int_vref_mv;
diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c
index a8458669350f..80e0c6e25a9b 100644
--- a/drivers/staging/iio/adc/ad799x_core.c
+++ b/drivers/staging/iio/adc/ad799x_core.c
@@ -33,10 +33,10 @@
 #include <linux/err.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
 
 #include "ad799x.h"
 
@@ -148,7 +148,7 @@ static int ad799x_read_raw(struct iio_dev *indio_dev,
 	unsigned int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		if (iio_buffer_enabled(indio_dev))
 			ret = -EBUSY;
@@ -182,7 +182,7 @@ static ssize_t ad799x_read_frequency(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad799x_state *st = iio_priv(indio_dev);
 
 	int ret;
@@ -201,7 +201,7 @@ static ssize_t ad799x_write_frequency(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad799x_state *st = iio_priv(indio_dev);
 
 	long val;
@@ -294,7 +294,7 @@ static ssize_t ad799x_read_channel_config(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad799x_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -312,7 +312,7 @@ static ssize_t ad799x_write_channel_config(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad799x_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -454,6 +454,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -461,6 +462,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -468,6 +470,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -475,6 +478,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -490,6 +494,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -497,6 +502,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -504,6 +510,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -511,6 +518,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -526,6 +534,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 8, 16, 4),
 			},
@@ -533,6 +542,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 8, 16, 4),
 			},
@@ -540,6 +550,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 8, 16, 4),
 			},
@@ -547,6 +558,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 8, 16, 4),
 			},
@@ -562,6 +574,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -570,6 +583,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -587,6 +601,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -596,6 +611,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.indexed = 1,
 				.channel = 1,
 				.scan_index = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
 			},
@@ -603,6 +619,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -611,6 +628,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -628,6 +646,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -636,6 +655,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -644,6 +664,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -652,6 +673,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -669,6 +691,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -677,6 +700,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -685,6 +709,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -693,6 +718,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 				.event_mask = AD799X_EV_MASK,
@@ -701,6 +727,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 4,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 4,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -708,6 +735,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 5,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 5,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -715,6 +743,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 6,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 6,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -722,6 +751,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 7,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 7,
 				.scan_type = IIO_ST('u', 10, 16, 2),
 			},
@@ -738,6 +768,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 0,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 0,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -746,6 +777,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 1,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 1,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -754,6 +786,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 2,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 2,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -762,6 +795,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 3,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 3,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 				.event_mask = AD799X_EV_MASK,
@@ -770,6 +804,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 4,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 4,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -777,6 +812,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 5,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 5,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -784,6 +820,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 6,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 6,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -791,6 +828,7 @@ static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
 				.type = IIO_VOLTAGE,
 				.indexed = 1,
 				.channel = 7,
+				.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 				.scan_index = 7,
 				.scan_type = IIO_ST('u', 12, 16, 0),
 			},
@@ -809,7 +847,7 @@ static int __devinit ad799x_probe(struct i2c_client *client,
 	int ret;
 	struct ad799x_platform_data *pdata = client->dev.platform_data;
 	struct ad799x_state *st;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL)
 		return -ENOMEM;
@@ -882,7 +920,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -902,7 +940,7 @@ static __devexit int ad799x_remove(struct i2c_client *client)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c
index 069765cab275..1c7ff4423db4 100644
--- a/drivers/staging/iio/adc/ad799x_ring.c
+++ b/drivers/staging/iio/adc/ad799x_ring.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Michael Hennerich, Analog Devices Inc.
+ * Copyright (C) 2010-2012 Michael Hennerich, Analog Devices Inc.
  * Copyright (C) 2008-2010 Jonathan Cameron
  *
  * This program is free software; you can redistribute it and/or modify
@@ -16,10 +16,10 @@
 #include <linux/i2c.h>
 #include <linux/bitops.h>
 
-#include "../iio.h"
-#include "../buffer.h"
-#include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
 
 #include "ad799x.h"
 
@@ -32,9 +32,7 @@
  **/
 static int ad799x_ring_preenable(struct iio_dev *indio_dev)
 {
-	struct iio_buffer *ring = indio_dev->buffer;
 	struct ad799x_state *st = iio_priv(indio_dev);
-
 	/*
 	 * Need to figure out the current mode based upon the requested
 	 * scan mask in iio_dev
@@ -43,21 +41,7 @@ static int ad799x_ring_preenable(struct iio_dev *indio_dev)
 	if (st->id == ad7997 || st->id == ad7998)
 		ad7997_8_set_scan_mode(st, *indio_dev->active_scan_mask);
 
-	st->d_size = bitmap_weight(indio_dev->active_scan_mask,
-				   indio_dev->masklength) * 2;
-
-	if (ring->scan_timestamp) {
-		st->d_size += sizeof(s64);
-
-		if (st->d_size % sizeof(s64))
-			st->d_size += sizeof(s64) - (st->d_size % sizeof(s64));
-	}
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, st->d_size);
-
-	return 0;
+	return iio_sw_buffer_preenable(indio_dev);
 }
 
 /**
@@ -78,7 +62,7 @@ static irqreturn_t ad799x_trigger_handler(int irq, void *p)
 	int b_sent;
 	u8 cmd;
 
-	rxbuf = kmalloc(st->d_size, GFP_KERNEL);
+	rxbuf = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (rxbuf == NULL)
 		goto out;
 
@@ -111,8 +95,8 @@ static irqreturn_t ad799x_trigger_handler(int irq, void *p)
 
 	time_ns = iio_get_time_ns();
 
-	if (ring->scan_timestamp)
-		memcpy(rxbuf + st->d_size - sizeof(s64),
+	if (indio_dev->scan_timestamp)
+		memcpy(rxbuf + indio_dev->scan_bytes - sizeof(s64),
 			&time_ns, sizeof(time_ns));
 
 	ring->access->store_to(indio_dev->buffer, rxbuf, time_ns);
@@ -136,7 +120,7 @@ int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	int ret = 0;
 
-	indio_dev->buffer = iio_sw_rb_allocate(indio_dev);
+	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
 	if (!indio_dev->buffer) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -150,7 +134,7 @@ int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 						 indio_dev->id);
 	if (indio_dev->pollfunc == NULL) {
 		ret = -ENOMEM;
-		goto error_deallocate_sw_rb;
+		goto error_deallocate_kfifo;
 	}
 
 	/* Ring buffer functions - here trigger setup related */
@@ -161,8 +145,8 @@ int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
 	return 0;
 
-error_deallocate_sw_rb:
-	iio_sw_rb_free(indio_dev->buffer);
+error_deallocate_kfifo:
+	iio_kfifo_free(indio_dev->buffer);
 error_ret:
 	return ret;
 }
@@ -170,5 +154,5 @@ error_ret:
 void ad799x_ring_cleanup(struct iio_dev *indio_dev)
 {
 	iio_dealloc_pollfunc(indio_dev->pollfunc);
-	iio_sw_rb_free(indio_dev->buffer);
+	iio_kfifo_free(indio_dev->buffer);
 }
diff --git a/drivers/staging/iio/adc/adt7310.c b/drivers/staging/iio/adc/adt7310.c
index caf57c1169b1..e5f1ed7f8696 100644
--- a/drivers/staging/iio/adc/adt7310.c
+++ b/drivers/staging/iio/adc/adt7310.c
@@ -15,9 +15,9 @@
 #include <linux/spi/spi.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 /*
  * ADT7310 registers definition
  */
@@ -175,7 +175,7 @@ static ssize_t adt7310_show_mode(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	u8 config;
 
@@ -198,7 +198,7 @@ static ssize_t adt7310_store_mode(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	u16 config;
 	int ret;
@@ -242,7 +242,7 @@ static ssize_t adt7310_show_resolution(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	int ret;
 	int bits;
@@ -264,7 +264,7 @@ static ssize_t adt7310_store_resolution(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	unsigned long data;
 	u16 config;
@@ -300,7 +300,7 @@ static ssize_t adt7310_show_id(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	u8 id;
 	int ret;
@@ -350,7 +350,7 @@ static ssize_t adt7310_show_value(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	u8 status;
 	u16 data;
@@ -424,7 +424,7 @@ static ssize_t adt7310_show_event_mode(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	int ret;
 
@@ -443,7 +443,7 @@ static ssize_t adt7310_set_event_mode(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	u16 config;
 	int ret;
@@ -476,7 +476,7 @@ static ssize_t adt7310_show_fault_queue(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	int ret;
 
@@ -492,7 +492,7 @@ static ssize_t adt7310_set_fault_queue(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	unsigned long data;
 	int ret;
@@ -522,7 +522,7 @@ static inline ssize_t adt7310_show_t_bound(struct device *dev,
 		u8 bound_reg,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	u16 data;
 	int ret;
@@ -540,7 +540,7 @@ static inline ssize_t adt7310_set_t_bound(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	long tmp1, tmp2;
 	u16 data;
@@ -660,7 +660,7 @@ static ssize_t adt7310_show_t_hyst(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	int ret;
 	u8 t_hyst;
@@ -677,7 +677,7 @@ static inline ssize_t adt7310_set_t_hyst(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7310_chip_info *chip = iio_priv(dev_info);
 	int ret;
 	unsigned long data;
@@ -753,7 +753,7 @@ static int __devinit adt7310_probe(struct spi_device *spi_dev)
 	unsigned long *adt7310_platform_data = spi_dev->dev.platform_data;
 	unsigned long irq_flags;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -833,7 +833,7 @@ error_unreg_int_irq:
 error_unreg_ct_irq:
 	free_irq(spi_dev->irq, indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -849,7 +849,7 @@ static int __devexit adt7310_remove(struct spi_device *spi_dev)
 		free_irq(adt7310_platform_data[0], indio_dev);
 	if (spi_dev->irq)
 		free_irq(spi_dev->irq, indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/adt7410.c b/drivers/staging/iio/adc/adt7410.c
index dff3e8ca2d78..917b6921e24d 100644
--- a/drivers/staging/iio/adc/adt7410.c
+++ b/drivers/staging/iio/adc/adt7410.c
@@ -15,9 +15,9 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 
 /*
  * ADT7410 registers definition
@@ -144,7 +144,7 @@ static ssize_t adt7410_show_mode(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	u8 config;
 
@@ -167,7 +167,7 @@ static ssize_t adt7410_store_mode(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	u16 config;
 	int ret;
@@ -211,7 +211,7 @@ static ssize_t adt7410_show_resolution(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	int ret;
 	int bits;
@@ -233,7 +233,7 @@ static ssize_t adt7410_store_resolution(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	unsigned long data;
 	u16 config;
@@ -269,7 +269,7 @@ static ssize_t adt7410_show_id(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	u8 id;
 	int ret;
@@ -319,7 +319,7 @@ static ssize_t adt7410_show_value(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	u8 status;
 	u16 data;
@@ -392,7 +392,7 @@ static ssize_t adt7410_show_event_mode(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	int ret;
 
@@ -411,7 +411,7 @@ static ssize_t adt7410_set_event_mode(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	u16 config;
 	int ret;
@@ -444,7 +444,7 @@ static ssize_t adt7410_show_fault_queue(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	int ret;
 
@@ -460,7 +460,7 @@ static ssize_t adt7410_set_fault_queue(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	unsigned long data;
 	int ret;
@@ -490,7 +490,7 @@ static inline ssize_t adt7410_show_t_bound(struct device *dev,
 		u8 bound_reg,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	u16 data;
 	int ret;
@@ -508,7 +508,7 @@ static inline ssize_t adt7410_set_t_bound(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	long tmp1, tmp2;
 	u16 data;
@@ -628,7 +628,7 @@ static ssize_t adt7410_show_t_hyst(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	int ret;
 	u8 t_hyst;
@@ -645,7 +645,7 @@ static inline ssize_t adt7410_set_t_hyst(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7410_chip_info *chip = iio_priv(dev_info);
 	int ret;
 	unsigned long data;
@@ -721,7 +721,7 @@ static int __devinit adt7410_probe(struct i2c_client *client,
 	int ret = 0;
 	unsigned long *adt7410_platform_data = client->dev.platform_data;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -797,7 +797,7 @@ error_unreg_int_irq:
 error_unreg_ct_irq:
 	free_irq(client->irq, indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -812,7 +812,7 @@ static int __devexit adt7410_remove(struct i2c_client *client)
 		free_irq(adt7410_platform_data[0], indio_dev);
 	if (client->irq)
 		free_irq(client->irq, indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/lpc32xx_adc.c b/drivers/staging/iio/adc/lpc32xx_adc.c
index dfc9033843a3..9690306d1f8f 100644
--- a/drivers/staging/iio/adc/lpc32xx_adc.c
+++ b/drivers/staging/iio/adc/lpc32xx_adc.c
@@ -30,9 +30,10 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/completion.h>
+#include <linux/of.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 /*
  * LPC32XX registers definitions
@@ -73,7 +74,7 @@ static int lpc32xx_read_raw(struct iio_dev *indio_dev,
 {
 	struct lpc32xx_adc_info *info = iio_priv(indio_dev);
 
-	if (mask == 0) {
+	if (mask == IIO_CHAN_INFO_RAW) {
 		mutex_lock(&indio_dev->mlock);
 		clk_enable(info->clk);
 		/* Measurement setup */
@@ -98,12 +99,13 @@ static const struct iio_info lpc32xx_adc_iio_info = {
 	.driver_module = THIS_MODULE,
 };
 
-#define LPC32XX_ADC_CHANNEL(_index) {		\
-	.type = IIO_VOLTAGE,			\
-	.indexed = 1,				\
-	.channel = _index,			\
-	.address = AD_IN * _index,		\
-	.scan_index = _index,			\
+#define LPC32XX_ADC_CHANNEL(_index) {			\
+	.type = IIO_VOLTAGE,				\
+	.indexed = 1,					\
+	.channel = _index,				\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
+	.address = AD_IN * _index,			\
+	.scan_index = _index,				\
 }
 
 static struct iio_chan_spec lpc32xx_adc_iio_channels[] = {
@@ -139,7 +141,7 @@ static int __devinit lpc32xx_adc_probe(struct platform_device *pdev)
 		goto errout1;
 	}
 
-	iodev = iio_allocate_device(sizeof(struct lpc32xx_adc_info));
+	iodev = iio_device_alloc(sizeof(struct lpc32xx_adc_info));
 	if (!iodev) {
 		dev_err(&pdev->dev, "failed allocating iio device\n");
 		retval = -ENOMEM;
@@ -200,7 +202,7 @@ errout4:
 errout3:
 	iounmap(info->adc_base);
 errout2:
-	iio_free_device(iodev);
+	iio_device_free(iodev);
 errout1:
 	return retval;
 }
@@ -216,17 +218,26 @@ static int __devexit lpc32xx_adc_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	clk_put(info->clk);
 	iounmap(info->adc_base);
-	iio_free_device(iodev);
+	iio_device_free(iodev);
 
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id lpc32xx_adc_match[] = {
+	{ .compatible = "nxp,lpc3220-adc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_adc_match);
+#endif
+
 static struct platform_driver lpc32xx_adc_driver = {
 	.probe		= lpc32xx_adc_probe,
 	.remove		= __devexit_p(lpc32xx_adc_remove),
 	.driver		= {
 		.name	= MOD_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(lpc32xx_adc_match),
 	},
 };
 
diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/staging/iio/adc/max1363_core.c
index cf3e2ca7e314..6799ce23a395 100644
--- a/drivers/staging/iio/adc/max1363_core.c
+++ b/drivers/staging/iio/adc/max1363_core.c
@@ -32,10 +32,11 @@
 #include <linux/err.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/driver.h>
 
 #include "max1363.h"
 
@@ -248,7 +249,7 @@ static int max1363_read_raw(struct iio_dev *indio_dev,
 	struct max1363_state *st = iio_priv(indio_dev);
 	int ret;
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = max1363_read_single_chan(indio_dev, chan, val, m);
 		if (ret < 0)
 			return ret;
@@ -281,7 +282,8 @@ static const enum max1363_modes max1363_mode_list[] = {
 #define MAX1363_EV_M						\
 	(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING)	\
 	 | IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING))
-#define MAX1363_INFO_MASK IIO_CHAN_INFO_SCALE_SHARED_BIT
+#define MAX1363_INFO_MASK (IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			   IIO_CHAN_INFO_SCALE_SHARED_BIT)
 #define MAX1363_CHAN_U(num, addr, si, bits, evmask)			\
 	{								\
 		.type = IIO_VOLTAGE,					\
@@ -497,7 +499,7 @@ static ssize_t max1363_monitor_show_freq(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct max1363_state *st = iio_priv(dev_get_drvdata(dev));
+	struct max1363_state *st = iio_priv(dev_to_iio_dev(dev));
 	return sprintf(buf, "%d\n", max1363_monitor_speeds[st->monitor_speed]);
 }
 
@@ -506,7 +508,7 @@ static ssize_t max1363_monitor_store_freq(struct device *dev,
 					const char *buf,
 					size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct max1363_state *st = iio_priv(indio_dev);
 	int i, ret;
 	unsigned long val;
@@ -830,6 +832,7 @@ static struct attribute_group max1363_event_attribute_group = {
 static const struct iio_info max1238_info = {
 	.read_raw = &max1363_read_raw,
 	.driver_module = THIS_MODULE,
+	.update_scan_mode = &max1363_update_scan_mode,
 };
 
 static const struct iio_info max1363_info = {
@@ -1284,11 +1287,14 @@ static int __devinit max1363_probe(struct i2c_client *client,
 	if (ret)
 		goto error_put_reg;
 
-	indio_dev = iio_allocate_device(sizeof(struct max1363_state));
+	indio_dev = iio_device_alloc(sizeof(struct max1363_state));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_disable_reg;
 	}
+	ret = iio_map_array_register(indio_dev, client->dev.platform_data);
+	if (ret < 0)
+		goto error_free_device;
 	st = iio_priv(indio_dev);
 	st->reg = reg;
 	/* this is only used for device removal purposes */
@@ -1299,7 +1305,7 @@ static int __devinit max1363_probe(struct i2c_client *client,
 
 	ret = max1363_alloc_scan_masks(indio_dev);
 	if (ret)
-		goto error_free_device;
+		goto error_unregister_map;
 
 	/* Estabilish that the iio_dev is a child of the i2c device */
 	indio_dev->dev.parent = &client->dev;
@@ -1349,8 +1355,10 @@ error_cleanup_ring:
 	max1363_ring_cleanup(indio_dev);
 error_free_available_scan_masks:
 	kfree(indio_dev->available_scan_masks);
+error_unregister_map:
+	iio_map_array_unregister(indio_dev, client->dev.platform_data);
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_disable_reg:
 	regulator_disable(reg);
 error_put_reg:
@@ -1375,7 +1383,8 @@ static int max1363_remove(struct i2c_client *client)
 		regulator_disable(reg);
 		regulator_put(reg);
 	}
-	iio_free_device(indio_dev);
+	iio_map_array_unregister(indio_dev, client->dev.platform_data);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/adc/max1363_ring.c b/drivers/staging/iio/adc/max1363_ring.c
index d0a60a382930..b30201300121 100644
--- a/drivers/staging/iio/adc/max1363_ring.c
+++ b/drivers/staging/iio/adc/max1363_ring.c
@@ -14,10 +14,10 @@
 #include <linux/i2c.h>
 #include <linux/bitops.h>
 
-#include "../iio.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 
 #include "max1363.h"
 
@@ -54,7 +54,7 @@ static irqreturn_t max1363_trigger_handler(int irq, void *p)
 		d_size = numvals*2;
 	else
 		d_size = numvals;
-	if (indio_dev->buffer->scan_timestamp) {
+	if (indio_dev->scan_timestamp) {
 		d_size += sizeof(s64);
 		if (d_size % sizeof(s64))
 			d_size += sizeof(s64) - (d_size % sizeof(s64));
@@ -78,7 +78,7 @@ static irqreturn_t max1363_trigger_handler(int irq, void *p)
 
 	time_ns = iio_get_time_ns();
 
-	if (indio_dev->buffer->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		memcpy(rxbuf + d_size - sizeof(s64), &time_ns, sizeof(time_ns));
 	iio_push_to_buffer(indio_dev->buffer, rxbuf, time_ns);
 
diff --git a/drivers/staging/iio/adc/spear_adc.c b/drivers/staging/iio/adc/spear_adc.c
new file mode 100644
index 000000000000..64d630e6fe29
--- /dev/null
+++ b/drivers/staging/iio/adc/spear_adc.c
@@ -0,0 +1,448 @@
+/*
+ * ST SPEAr ADC driver
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/*
+ * SPEAR registers definitions
+ */
+
+#define SCAN_RATE_LO(x)		((x) & 0xFFFF)
+#define SCAN_RATE_HI(x)		(((x) >> 0x10) & 0xFFFF)
+#define CLK_LOW(x)		(((x) & 0xf) << 0)
+#define CLK_HIGH(x)		(((x) & 0xf) << 4)
+
+/* Bit definitions for SPEAR_ADC_STATUS */
+#define START_CONVERSION	(1 << 0)
+#define CHANNEL_NUM(x)		((x) << 1)
+#define ADC_ENABLE		(1 << 4)
+#define AVG_SAMPLE(x)		((x) << 5)
+#define VREF_INTERNAL		(1 << 9)
+
+#define DATA_MASK		0x03ff
+#define DATA_BITS		10
+
+#define MOD_NAME "spear-adc"
+
+#define ADC_CHANNEL_NUM		8
+
+#define CLK_MIN			2500000
+#define CLK_MAX			20000000
+
+struct adc_regs_spear3xx {
+	u32 status;
+	u32 average;
+	u32 scan_rate;
+	u32 clk;	/* Not avail for 1340 & 1310 */
+	u32 ch_ctrl[ADC_CHANNEL_NUM];
+	u32 ch_data[ADC_CHANNEL_NUM];
+};
+
+struct chan_data {
+	u32 lsb;
+	u32 msb;
+};
+
+struct adc_regs_spear6xx {
+	u32 status;
+	u32 pad[2];
+	u32 clk;
+	u32 ch_ctrl[ADC_CHANNEL_NUM];
+	struct chan_data ch_data[ADC_CHANNEL_NUM];
+	u32 scan_rate_lo;
+	u32 scan_rate_hi;
+	struct chan_data average;
+};
+
+struct spear_adc_info {
+	struct device_node *np;
+	struct adc_regs_spear3xx __iomem *adc_base_spear3xx;
+	struct adc_regs_spear6xx __iomem *adc_base_spear6xx;
+	struct clk *clk;
+	struct completion completion;
+	u32 current_clk;
+	u32 sampling_freq;
+	u32 avg_samples;
+	u32 vref_external;
+	u32 value;
+};
+
+/*
+ * Functions to access some SPEAr ADC register. Abstracted into
+ * static inline functions, because of different register offsets
+ * on different SoC variants (SPEAr300 vs SPEAr600 etc).
+ */
+static void spear_adc_set_status(struct spear_adc_info *info, u32 val)
+{
+	__raw_writel(val, &info->adc_base_spear6xx->status);
+}
+
+static void spear_adc_set_clk(struct spear_adc_info *info, u32 val)
+{
+	u32 clk_high, clk_low, count;
+	u32 apb_clk = clk_get_rate(info->clk);
+
+	count = (apb_clk + val - 1) / val;
+	clk_low = count / 2;
+	clk_high = count - clk_low;
+	info->current_clk = apb_clk / count;
+
+	__raw_writel(CLK_LOW(clk_low) | CLK_HIGH(clk_high),
+		     &info->adc_base_spear6xx->clk);
+}
+
+static void spear_adc_set_ctrl(struct spear_adc_info *info, int n,
+			       u32 val)
+{
+	__raw_writel(val, &info->adc_base_spear6xx->ch_ctrl[n]);
+}
+
+static u32 spear_adc_get_average(struct spear_adc_info *info)
+{
+	if (of_device_is_compatible(info->np, "st,spear600-adc")) {
+		return __raw_readl(&info->adc_base_spear6xx->average.msb) &
+			DATA_MASK;
+	} else {
+		return __raw_readl(&info->adc_base_spear3xx->average) &
+			DATA_MASK;
+	}
+}
+
+static void spear_adc_set_scanrate(struct spear_adc_info *info, u32 rate)
+{
+	if (of_device_is_compatible(info->np, "st,spear600-adc")) {
+		__raw_writel(SCAN_RATE_LO(rate),
+			     &info->adc_base_spear6xx->scan_rate_lo);
+		__raw_writel(SCAN_RATE_HI(rate),
+			     &info->adc_base_spear6xx->scan_rate_hi);
+	} else {
+		__raw_writel(rate, &info->adc_base_spear3xx->scan_rate);
+	}
+}
+
+static int spear_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val,
+			  int *val2,
+			  long mask)
+{
+	struct spear_adc_info *info = iio_priv(indio_dev);
+	u32 scale_mv;
+	u32 status;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&indio_dev->mlock);
+
+		status = CHANNEL_NUM(chan->channel) |
+			AVG_SAMPLE(info->avg_samples) |
+			START_CONVERSION | ADC_ENABLE;
+		if (info->vref_external == 0)
+			status |= VREF_INTERNAL;
+
+		spear_adc_set_status(info, status);
+		wait_for_completion(&info->completion); /* set by ISR */
+		*val = info->value;
+
+		mutex_unlock(&indio_dev->mlock);
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		scale_mv = (info->vref_external * 1000) >> DATA_BITS;
+		*val =  scale_mv / 1000;
+		*val2 = (scale_mv % 1000) * 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+
+	return -EINVAL;
+}
+
+#define SPEAR_ADC_CHAN(idx) {				\
+	.type = IIO_VOLTAGE,				\
+	.indexed = 1,					\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+	IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
+	.channel = idx,					\
+	.scan_type = {					\
+		.sign = 'u',				\
+		.storagebits = 16,			\
+	},						\
+}
+
+static struct iio_chan_spec spear_adc_iio_channels[] = {
+	SPEAR_ADC_CHAN(0),
+	SPEAR_ADC_CHAN(1),
+	SPEAR_ADC_CHAN(2),
+	SPEAR_ADC_CHAN(3),
+	SPEAR_ADC_CHAN(4),
+	SPEAR_ADC_CHAN(5),
+	SPEAR_ADC_CHAN(6),
+	SPEAR_ADC_CHAN(7),
+};
+
+static irqreturn_t spear_adc_isr(int irq, void *dev_id)
+{
+	struct spear_adc_info *info = (struct spear_adc_info *)dev_id;
+
+	/* Read value to clear IRQ */
+	info->value = spear_adc_get_average(info);
+	complete(&info->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int spear_adc_configure(struct spear_adc_info *info)
+{
+	int i;
+
+	/* Reset ADC core */
+	spear_adc_set_status(info, 0);
+	__raw_writel(0, &info->adc_base_spear6xx->clk);
+	for (i = 0; i < 8; i++)
+		spear_adc_set_ctrl(info, i, 0);
+	spear_adc_set_scanrate(info, 0);
+
+	spear_adc_set_clk(info, info->sampling_freq);
+
+	return 0;
+}
+
+static ssize_t spear_adc_read_frequency(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct spear_adc_info *info = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", info->current_clk);
+}
+
+static ssize_t spear_adc_write_frequency(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf,
+					 size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct spear_adc_info *info = iio_priv(indio_dev);
+	u32 clk_high, clk_low, count;
+	u32 apb_clk = clk_get_rate(info->clk);
+	unsigned long lval;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &lval);
+	if (ret)
+		return ret;
+
+	mutex_lock(&indio_dev->mlock);
+
+	if ((lval < CLK_MIN) || (lval > CLK_MAX)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	count = (apb_clk + lval - 1) / lval;
+	clk_low = count / 2;
+	clk_high = count - clk_low;
+	info->current_clk = apb_clk / count;
+	spear_adc_set_clk(info, lval);
+
+out:
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret ? ret : len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+			      spear_adc_read_frequency,
+			      spear_adc_write_frequency);
+
+static struct attribute *spear_attributes[] = {
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group spear_attribute_group = {
+	.attrs = spear_attributes,
+};
+
+static const struct iio_info spear_adc_iio_info = {
+	.read_raw = &spear_read_raw,
+	.attrs = &spear_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+static int __devinit spear_adc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct spear_adc_info *info;
+	struct iio_dev *iodev = NULL;
+	int ret = -ENODEV;
+	int irq;
+
+	iodev = iio_device_alloc(sizeof(struct spear_adc_info));
+	if (!iodev) {
+		dev_err(dev, "failed allocating iio device\n");
+		ret = -ENOMEM;
+		goto errout1;
+	}
+
+	info = iio_priv(iodev);
+	info->np = np;
+
+	/*
+	 * SPEAr600 has a different register layout than other SPEAr SoC's
+	 * (e.g. SPEAr3xx). Let's provide two register base addresses
+	 * to support multi-arch kernels.
+	 */
+	info->adc_base_spear6xx = of_iomap(np, 0);
+	if (!info->adc_base_spear6xx) {
+		dev_err(dev, "failed mapping memory\n");
+		ret = -ENOMEM;
+		goto errout2;
+	}
+	info->adc_base_spear3xx =
+		(struct adc_regs_spear3xx *)info->adc_base_spear6xx;
+
+	info->clk = clk_get(dev, NULL);
+	if (IS_ERR(info->clk)) {
+		dev_err(dev, "failed getting clock\n");
+		goto errout3;
+	}
+
+	ret = clk_prepare(info->clk);
+	if (ret) {
+		dev_err(dev, "failed preparing clock\n");
+		goto errout4;
+	}
+
+	ret = clk_enable(info->clk);
+	if (ret) {
+		dev_err(dev, "failed enabling clock\n");
+		goto errout5;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if ((irq < 0) || (irq >= NR_IRQS)) {
+		dev_err(dev, "failed getting interrupt resource\n");
+		ret = -EINVAL;
+		goto errout6;
+	}
+
+	ret = devm_request_irq(dev, irq, spear_adc_isr, 0, MOD_NAME, info);
+	if (ret < 0) {
+		dev_err(dev, "failed requesting interrupt\n");
+		goto errout6;
+	}
+
+	if (of_property_read_u32(np, "sampling-frequency",
+				 &info->sampling_freq)) {
+		dev_err(dev, "sampling-frequency missing in DT\n");
+		ret = -EINVAL;
+		goto errout6;
+	}
+
+	/*
+	 * Optional avg_samples defaults to 0, resulting in single data
+	 * conversion
+	 */
+	of_property_read_u32(np, "average-samples", &info->avg_samples);
+
+	/*
+	 * Optional vref_external defaults to 0, resulting in internal vref
+	 * selection
+	 */
+	of_property_read_u32(np, "vref-external", &info->vref_external);
+
+	spear_adc_configure(info);
+
+	platform_set_drvdata(pdev, iodev);
+
+	init_completion(&info->completion);
+
+	iodev->name = MOD_NAME;
+	iodev->dev.parent = dev;
+	iodev->info = &spear_adc_iio_info;
+	iodev->modes = INDIO_DIRECT_MODE;
+	iodev->channels = spear_adc_iio_channels;
+	iodev->num_channels = ARRAY_SIZE(spear_adc_iio_channels);
+
+	ret = iio_device_register(iodev);
+	if (ret)
+		goto errout6;
+
+	dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq);
+
+	return 0;
+
+errout6:
+	clk_disable(info->clk);
+errout5:
+	clk_unprepare(info->clk);
+errout4:
+	clk_put(info->clk);
+errout3:
+	iounmap(info->adc_base_spear6xx);
+errout2:
+	iio_device_free(iodev);
+errout1:
+	return ret;
+}
+
+static int __devexit spear_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *iodev = platform_get_drvdata(pdev);
+	struct spear_adc_info *info = iio_priv(iodev);
+
+	iio_device_unregister(iodev);
+	platform_set_drvdata(pdev, NULL);
+	clk_disable(info->clk);
+	clk_unprepare(info->clk);
+	clk_put(info->clk);
+	iounmap(info->adc_base_spear6xx);
+	iio_device_free(iodev);
+
+	return 0;
+}
+
+static const struct of_device_id spear_adc_dt_ids[] = {
+	{ .compatible = "st,spear600-adc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
+
+static struct platform_driver spear_adc_driver = {
+	.probe		= spear_adc_probe,
+	.remove		= __devexit_p(spear_adc_remove),
+	.driver		= {
+		.name	= MOD_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(spear_adc_dt_ids),
+	},
+};
+
+module_platform_driver(spear_adc_driver);
+
+MODULE_AUTHOR("Stefan Roese <sr@denx.de>");
+MODULE_DESCRIPTION("SPEAr ADC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c
index fd6a45444058..8fb014a046a2 100644
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -19,9 +19,9 @@
 #include <linux/rtc.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../events.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/events.h>
+#include <linux/iio/sysfs.h>
 #include "adt7316.h"
 
 /*
@@ -220,7 +220,7 @@ static ssize_t adt7316_show_enabled(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return sprintf(buf, "%d\n", !!(chip->config1 & ADT7316_EN));
@@ -252,7 +252,7 @@ static ssize_t adt7316_store_enabled(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	int enable;
 
@@ -276,7 +276,7 @@ static ssize_t adt7316_show_select_ex_temp(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if ((chip->id & ID_FAMILY_MASK) != ID_ADT75XX)
@@ -290,7 +290,7 @@ static ssize_t adt7316_store_select_ex_temp(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config1;
 	int ret;
@@ -320,7 +320,7 @@ static ssize_t adt7316_show_mode(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if (chip->config2 & ADT7316_AD_SINGLE_CH_MODE)
@@ -334,7 +334,7 @@ static ssize_t adt7316_store_mode(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config2;
 	int ret;
@@ -370,7 +370,7 @@ static ssize_t adt7316_show_ad_channel(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if (!(chip->config2 & ADT7316_AD_SINGLE_CH_MODE))
@@ -409,7 +409,7 @@ static ssize_t adt7316_store_ad_channel(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config2;
 	unsigned long data = 0;
@@ -455,7 +455,7 @@ static ssize_t adt7316_show_all_ad_channels(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if (!(chip->config2 & ADT7316_AD_SINGLE_CH_MODE))
@@ -477,7 +477,7 @@ static ssize_t adt7316_show_disable_averaging(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return sprintf(buf, "%d\n",
@@ -489,7 +489,7 @@ static ssize_t adt7316_store_disable_averaging(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config2;
 	int ret;
@@ -516,7 +516,7 @@ static ssize_t adt7316_show_enable_smbus_timeout(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return sprintf(buf, "%d\n",
@@ -528,7 +528,7 @@ static ssize_t adt7316_store_enable_smbus_timeout(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config2;
 	int ret;
@@ -557,7 +557,7 @@ static ssize_t adt7316_store_reset(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config2;
 	int ret;
@@ -580,7 +580,7 @@ static ssize_t adt7316_show_powerdown(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return sprintf(buf, "%d\n", !!(chip->config1 & ADT7316_PD));
@@ -591,7 +591,7 @@ static ssize_t adt7316_store_powerdown(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config1;
 	int ret;
@@ -618,7 +618,7 @@ static ssize_t adt7316_show_fast_ad_clock(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return sprintf(buf, "%d\n", !!(chip->config3 & ADT7316_ADCLK_22_5));
@@ -629,7 +629,7 @@ static ssize_t adt7316_store_fast_ad_clock(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config3;
 	int ret;
@@ -656,7 +656,7 @@ static ssize_t adt7316_show_da_high_resolution(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if (chip->config3 & ADT7316_DA_HIGH_RESOLUTION) {
@@ -674,7 +674,7 @@ static ssize_t adt7316_store_da_high_resolution(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config3;
 	int ret;
@@ -708,7 +708,7 @@ static ssize_t adt7316_show_AIN_internal_Vref(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if ((chip->id & ID_FAMILY_MASK) != ID_ADT75XX)
@@ -723,7 +723,7 @@ static ssize_t adt7316_store_AIN_internal_Vref(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config3;
 	int ret;
@@ -755,7 +755,7 @@ static ssize_t adt7316_show_enable_prop_DACA(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return sprintf(buf, "%d\n",
@@ -767,7 +767,7 @@ static ssize_t adt7316_store_enable_prop_DACA(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config3;
 	int ret;
@@ -794,7 +794,7 @@ static ssize_t adt7316_show_enable_prop_DACB(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return sprintf(buf, "%d\n",
@@ -806,7 +806,7 @@ static ssize_t adt7316_store_enable_prop_DACB(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config3;
 	int ret;
@@ -833,7 +833,7 @@ static ssize_t adt7316_show_DAC_2Vref_ch_mask(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return sprintf(buf, "0x%x\n",
@@ -845,7 +845,7 @@ static ssize_t adt7316_store_DAC_2Vref_ch_mask(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 dac_config;
 	unsigned long data = 0;
@@ -876,7 +876,7 @@ static ssize_t adt7316_show_DAC_update_mode(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if (!(chip->config3 & ADT7316_DA_EN_VIA_DAC_LDCA))
@@ -900,7 +900,7 @@ static ssize_t adt7316_store_DAC_update_mode(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 dac_config;
 	unsigned long data;
@@ -934,7 +934,7 @@ static ssize_t adt7316_show_all_DAC_update_modes(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if (chip->config3 & ADT7316_DA_EN_VIA_DAC_LDCA)
@@ -955,7 +955,7 @@ static ssize_t adt7316_store_update_DAC(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 ldac_config;
 	unsigned long data;
@@ -994,7 +994,7 @@ static ssize_t adt7316_show_DA_AB_Vref_bypass(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if ((chip->id & ID_FAMILY_MASK) == ID_ADT75XX)
@@ -1009,7 +1009,7 @@ static ssize_t adt7316_store_DA_AB_Vref_bypass(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 dac_config;
 	int ret;
@@ -1039,7 +1039,7 @@ static ssize_t adt7316_show_DA_CD_Vref_bypass(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if ((chip->id & ID_FAMILY_MASK) == ID_ADT75XX)
@@ -1054,7 +1054,7 @@ static ssize_t adt7316_store_DA_CD_Vref_bypass(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 dac_config;
 	int ret;
@@ -1084,7 +1084,7 @@ static ssize_t adt7316_show_DAC_internal_Vref(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	if ((chip->id & ID_FAMILY_MASK) == ID_ADT75XX)
@@ -1101,7 +1101,7 @@ static ssize_t adt7316_store_DAC_internal_Vref(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 ldac_config;
 	unsigned long data;
@@ -1220,7 +1220,7 @@ static ssize_t adt7316_show_VDD(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_ad(chip, ADT7316_AD_SINGLE_CH_VDD, buf);
@@ -1231,7 +1231,7 @@ static ssize_t adt7316_show_in_temp(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_ad(chip, ADT7316_AD_SINGLE_CH_IN, buf);
@@ -1243,7 +1243,7 @@ static ssize_t adt7316_show_ex_temp_AIN1(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_ad(chip, ADT7316_AD_SINGLE_CH_EX, buf);
@@ -1256,7 +1256,7 @@ static ssize_t adt7316_show_AIN2(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_ad(chip, ADT7516_AD_SINGLE_CH_AIN2, buf);
@@ -1267,7 +1267,7 @@ static ssize_t adt7316_show_AIN3(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_ad(chip, ADT7516_AD_SINGLE_CH_AIN3, buf);
@@ -1278,7 +1278,7 @@ static ssize_t adt7316_show_AIN4(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_ad(chip, ADT7516_AD_SINGLE_CH_AIN4, buf);
@@ -1330,7 +1330,7 @@ static ssize_t adt7316_show_in_temp_offset(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_temp_offset(chip, ADT7316_IN_TEMP_OFFSET, buf);
@@ -1341,7 +1341,7 @@ static ssize_t adt7316_store_in_temp_offset(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_store_temp_offset(chip, ADT7316_IN_TEMP_OFFSET, buf, len);
@@ -1355,7 +1355,7 @@ static ssize_t adt7316_show_ex_temp_offset(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_temp_offset(chip, ADT7316_EX_TEMP_OFFSET, buf);
@@ -1366,7 +1366,7 @@ static ssize_t adt7316_store_ex_temp_offset(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_store_temp_offset(chip, ADT7316_EX_TEMP_OFFSET, buf, len);
@@ -1380,7 +1380,7 @@ static ssize_t adt7316_show_in_analog_temp_offset(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_temp_offset(chip,
@@ -1392,7 +1392,7 @@ static ssize_t adt7316_store_in_analog_temp_offset(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_store_temp_offset(chip,
@@ -1407,7 +1407,7 @@ static ssize_t adt7316_show_ex_analog_temp_offset(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_temp_offset(chip,
@@ -1419,7 +1419,7 @@ static ssize_t adt7316_store_ex_analog_temp_offset(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_store_temp_offset(chip,
@@ -1504,7 +1504,7 @@ static ssize_t adt7316_show_DAC_A(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_DAC(chip, 0, buf);
@@ -1515,7 +1515,7 @@ static ssize_t adt7316_store_DAC_A(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_store_DAC(chip, 0, buf, len);
@@ -1528,7 +1528,7 @@ static ssize_t adt7316_show_DAC_B(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_DAC(chip, 1, buf);
@@ -1539,7 +1539,7 @@ static ssize_t adt7316_store_DAC_B(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_store_DAC(chip, 1, buf, len);
@@ -1552,7 +1552,7 @@ static ssize_t adt7316_show_DAC_C(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_DAC(chip, 2, buf);
@@ -1563,7 +1563,7 @@ static ssize_t adt7316_store_DAC_C(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_store_DAC(chip, 2, buf, len);
@@ -1576,7 +1576,7 @@ static ssize_t adt7316_show_DAC_D(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_show_DAC(chip, 3, buf);
@@ -1587,7 +1587,7 @@ static ssize_t adt7316_store_DAC_D(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return adt7316_store_DAC(chip, 3, buf, len);
@@ -1600,7 +1600,7 @@ static ssize_t adt7316_show_device_id(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 id;
 	int ret;
@@ -1618,7 +1618,7 @@ static ssize_t adt7316_show_manufactorer_id(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 id;
 	int ret;
@@ -1637,7 +1637,7 @@ static ssize_t adt7316_show_device_rev(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 rev;
 	int ret;
@@ -1655,7 +1655,7 @@ static ssize_t adt7316_show_bus_type(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 stat;
 	int ret;
@@ -1841,7 +1841,7 @@ static ssize_t adt7316_show_int_mask(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return sprintf(buf, "0x%x\n", chip->int_mask);
@@ -1855,7 +1855,7 @@ static ssize_t adt7316_set_int_mask(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	unsigned long data;
 	int ret;
@@ -1895,7 +1895,7 @@ static inline ssize_t adt7316_show_ad_bound(struct device *dev,
 		char *buf)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 val;
 	int data;
@@ -1926,7 +1926,7 @@ static inline ssize_t adt7316_set_ad_bound(struct device *dev,
 		size_t len)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	long data;
 	u8 val;
@@ -1965,7 +1965,7 @@ static ssize_t adt7316_show_int_enabled(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 
 	return sprintf(buf, "%d\n", !!(chip->config1 & ADT7316_INT_EN));
@@ -1976,7 +1976,7 @@ static ssize_t adt7316_set_int_enabled(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct iio_dev *dev_info = dev_to_iio_dev(dev);
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	u8 config1;
 	int ret;
@@ -2133,7 +2133,7 @@ int __devinit adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 	unsigned short *adt7316_platform_data = dev->platform_data;
 	int ret = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -2210,7 +2210,7 @@ int __devinit adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 error_unreg_irq:
 	free_irq(chip->bus.irq, indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -2224,7 +2224,7 @@ int __devexit adt7316_remove(struct device *dev)
 	iio_device_unregister(indio_dev);
 	if (chip->bus.irq)
 		free_irq(chip->bus.irq, indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/buffer.h b/drivers/staging/iio/buffer.h
deleted file mode 100644
index df2046dcb623..000000000000
--- a/drivers/staging/iio/buffer.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/* The industrial I/O core - generic buffer interfaces.
- *
- * Copyright (c) 2008 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef _IIO_BUFFER_GENERIC_H_
-#define _IIO_BUFFER_GENERIC_H_
-#include <linux/sysfs.h>
-#include "iio.h"
-
-#ifdef CONFIG_IIO_BUFFER
-
-struct iio_buffer;
-
-/**
- * struct iio_buffer_access_funcs - access functions for buffers.
- * @store_to:		actually store stuff to the buffer
- * @read_first_n:	try to get a specified number of bytes (must exist)
- * @request_update:	if a parameter change has been marked, update underlying
- *			storage.
- * @get_bytes_per_datum:get current bytes per datum
- * @set_bytes_per_datum:set number of bytes per datum
- * @get_length:		get number of datums in buffer
- * @set_length:		set number of datums in buffer
- *
- * The purpose of this structure is to make the buffer element
- * modular as event for a given driver, different usecases may require
- * different buffer designs (space efficiency vs speed for example).
- *
- * It is worth noting that a given buffer implementation may only support a
- * small proportion of these functions.  The core code 'should' cope fine with
- * any of them not existing.
- **/
-struct iio_buffer_access_funcs {
-	int (*store_to)(struct iio_buffer *buffer, u8 *data, s64 timestamp);
-	int (*read_first_n)(struct iio_buffer *buffer,
-			    size_t n,
-			    char __user *buf);
-
-	int (*request_update)(struct iio_buffer *buffer);
-
-	int (*get_bytes_per_datum)(struct iio_buffer *buffer);
-	int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd);
-	int (*get_length)(struct iio_buffer *buffer);
-	int (*set_length)(struct iio_buffer *buffer, int length);
-};
-
-/**
- * struct iio_buffer - general buffer structure
- * @length:		[DEVICE] number of datums in buffer
- * @bytes_per_datum:	[DEVICE] size of individual datum including timestamp
- * @scan_el_attrs:	[DRIVER] control of scan elements if that scan mode
- *			control method is used
- * @scan_mask:		[INTERN] bitmask used in masking scan mode elements
- * @scan_index_timestamp:[INTERN] cache of the index to the timestamp
- * @scan_timestamp:	[INTERN] does the scan mode include a timestamp
- * @access:		[DRIVER] buffer access functions associated with the
- *			implementation.
- * @scan_el_dev_attr_list:[INTERN] list of scan element related attributes.
- * @scan_el_group:	[DRIVER] attribute group for those attributes not
- *			created from the iio_chan_info array.
- * @pollq:		[INTERN] wait queue to allow for polling on the buffer.
- * @stufftoread:	[INTERN] flag to indicate new data.
- * @demux_list:		[INTERN] list of operations required to demux the scan.
- * @demux_bounce:	[INTERN] buffer for doing gather from incoming scan.
- **/
-struct iio_buffer {
-	int					length;
-	int					bytes_per_datum;
-	struct attribute_group			*scan_el_attrs;
-	long					*scan_mask;
-	bool					scan_timestamp;
-	unsigned				scan_index_timestamp;
-	const struct iio_buffer_access_funcs	*access;
-	struct list_head			scan_el_dev_attr_list;
-	struct attribute_group			scan_el_group;
-	wait_queue_head_t			pollq;
-	bool					stufftoread;
-	const struct attribute_group *attrs;
-	struct list_head			demux_list;
-	unsigned char				*demux_bounce;
-};
-
-/**
- * iio_buffer_init() - Initialize the buffer structure
- * @buffer: buffer to be initialized
- **/
-void iio_buffer_init(struct iio_buffer *buffer);
-
-/**
- * __iio_update_buffer() - update common elements of buffers
- * @buffer:		buffer that is the event source
- * @bytes_per_datum:	size of individual datum including timestamp
- * @length:		number of datums in buffer
- **/
-static inline void __iio_update_buffer(struct iio_buffer *buffer,
-				       int bytes_per_datum, int length)
-{
-	buffer->bytes_per_datum = bytes_per_datum;
-	buffer->length = length;
-}
-
-int iio_scan_mask_query(struct iio_dev *indio_dev,
-			struct iio_buffer *buffer, int bit);
-
-/**
- * iio_scan_mask_set() - set particular bit in the scan mask
- * @buffer: the buffer whose scan mask we are interested in
- * @bit: the bit to be set.
- **/
-int iio_scan_mask_set(struct iio_dev *indio_dev,
-		      struct iio_buffer *buffer, int bit);
-
-/**
- * iio_push_to_buffer() - push to a registered buffer.
- * @buffer:		IIO buffer structure for device
- * @scan:		Full scan.
- * @timestamp:
- */
-int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data,
-		       s64 timestamp);
-
-int iio_update_demux(struct iio_dev *indio_dev);
-
-/**
- * iio_buffer_register() - register the buffer with IIO core
- * @indio_dev: device with the buffer to be registered
- **/
-int iio_buffer_register(struct iio_dev *indio_dev,
-			const struct iio_chan_spec *channels,
-			int num_channels);
-
-/**
- * iio_buffer_unregister() - unregister the buffer from IIO core
- * @indio_dev: the device with the buffer to be unregistered
- **/
-void iio_buffer_unregister(struct iio_dev *indio_dev);
-
-/**
- * iio_buffer_read_length() - attr func to get number of datums in the buffer
- **/
-ssize_t iio_buffer_read_length(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf);
-/**
- * iio_buffer_write_length() - attr func to set number of datums in the buffer
- **/
-ssize_t iio_buffer_write_length(struct device *dev,
-			      struct device_attribute *attr,
-			      const char *buf,
-			      size_t len);
-/**
- * iio_buffer_store_enable() - attr to turn the buffer on
- **/
-ssize_t iio_buffer_store_enable(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf,
-				size_t len);
-/**
- * iio_buffer_show_enable() - attr to see if the buffer is on
- **/
-ssize_t iio_buffer_show_enable(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf);
-#define IIO_BUFFER_LENGTH_ATTR DEVICE_ATTR(length, S_IRUGO | S_IWUSR,	\
-					   iio_buffer_read_length,	\
-					   iio_buffer_write_length)
-
-#define IIO_BUFFER_ENABLE_ATTR DEVICE_ATTR(enable, S_IRUGO | S_IWUSR,	\
-					   iio_buffer_show_enable,	\
-					   iio_buffer_store_enable)
-
-int iio_sw_buffer_preenable(struct iio_dev *indio_dev);
-
-#else /* CONFIG_IIO_BUFFER */
-
-static inline int iio_buffer_register(struct iio_dev *indio_dev,
-					   struct iio_chan_spec *channels,
-					   int num_channels)
-{
-	return 0;
-}
-
-static inline void iio_buffer_unregister(struct iio_dev *indio_dev)
-{};
-
-#endif /* CONFIG_IIO_BUFFER */
-
-#endif /* _IIO_BUFFER_GENERIC_H_ */
diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c
index e4a08dc9b6f5..a16d1a22db0a 100644
--- a/drivers/staging/iio/cdc/ad7150.c
+++ b/drivers/staging/iio/cdc/ad7150.c
@@ -13,9 +13,9 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 /*
  * AD7150 registers definition
  */
@@ -104,7 +104,7 @@ static int ad7150_read_raw(struct iio_dev *indio_dev,
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = i2c_smbus_read_word_data(chip->client,
 					ad7150_addresses[chan->channel][0]);
 		if (ret < 0)
@@ -341,7 +341,7 @@ static ssize_t ad7150_show_timeout(struct device *dev,
 				   struct device_attribute *attr,
 				   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	u8 value;
@@ -370,7 +370,7 @@ static ssize_t ad7150_store_timeout(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int chan = IIO_EVENT_CODE_EXTRACT_CHAN(this_attr->address);
@@ -429,7 +429,8 @@ static const struct iio_chan_spec ad7150_channels[] = {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT,
 		.event_mask =
 		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |
 		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING) |
@@ -441,7 +442,8 @@ static const struct iio_chan_spec ad7150_channels[] = {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT,
 		.event_mask =
 		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) |
 		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING) |
@@ -556,7 +558,7 @@ static int __devinit ad7150_probe(struct i2c_client *client,
 	struct ad7150_chip_info *chip;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -619,7 +621,7 @@ error_free_irq:
 	if (client->irq)
 		free_irq(client->irq, indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -635,7 +637,7 @@ static int __devexit ad7150_remove(struct i2c_client *client)
 	if (client->dev.platform_data)
 		free_irq(*(unsigned int *)client->dev.platform_data, indio_dev);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/cdc/ad7152.c b/drivers/staging/iio/cdc/ad7152.c
index fdb83c35e6dd..98c3015116aa 100644
--- a/drivers/staging/iio/cdc/ad7152.c
+++ b/drivers/staging/iio/cdc/ad7152.c
@@ -15,8 +15,8 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 /*
  * TODO: Check compliance of calibbias with abi (units)
@@ -97,7 +97,7 @@ static inline ssize_t ad7152_start_calib(struct device *dev,
 					 size_t len,
 					 u8 regval)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7152_chip_info *chip = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	bool doit;
@@ -169,7 +169,7 @@ static ssize_t ad7152_show_filter_rate_setup(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7152_chip_info *chip = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n",
@@ -181,7 +181,7 @@ static ssize_t ad7152_store_filter_rate_setup(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7152_chip_info *chip = iio_priv(indio_dev);
 	u8 data;
 	int ret, i;
@@ -329,7 +329,7 @@ static int ad7152_read_raw(struct iio_dev *indio_dev,
 	mutex_lock(&indio_dev->mlock);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		/* First set whether in differential mode */
 
 		regval = chip->setup[chan->channel];
@@ -436,7 +436,8 @@ static const struct iio_chan_spec ad7152_channels[] = {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 	}, {
@@ -445,14 +446,16 @@ static const struct iio_chan_spec ad7152_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.channel2 = 2,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 	}, {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 	}, {
@@ -461,7 +464,8 @@ static const struct iio_chan_spec ad7152_channels[] = {
 		.indexed = 1,
 		.channel = 1,
 		.channel2 = 3,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 	}
@@ -477,7 +481,7 @@ static int __devinit ad7152_probe(struct i2c_client *client,
 	struct ad7152_chip_info *chip;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -509,7 +513,7 @@ static int __devinit ad7152_probe(struct i2c_client *client,
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -519,7 +523,7 @@ static int __devexit ad7152_remove(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 
 	iio_device_unregister(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 40b8512cbc32..754e11e87193 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -16,8 +16,8 @@
 #include <linux/module.h>
 #include <linux/stat.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #include "ad7746.h"
 
@@ -123,7 +123,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.address = AD7746_REG_VT_DATA_HIGH << 8 |
 			AD7746_VTSETUP_VTMD_EXT_VIN,
 	},
@@ -132,7 +133,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.indexed = 1,
 		.channel = 1,
 		.extend_name = "supply",
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.address = AD7746_REG_VT_DATA_HIGH << 8 |
 			AD7746_VTSETUP_VTMD_VDD_MON,
 	},
@@ -140,7 +142,7 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.processed_val = IIO_PROCESSED,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
 		.address = AD7746_REG_VT_DATA_HIGH << 8 |
 			AD7746_VTSETUP_VTMD_INT_TEMP,
 	},
@@ -148,7 +150,7 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 1,
-		.processed_val = IIO_PROCESSED,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
 		.address = AD7746_REG_VT_DATA_HIGH << 8 |
 			AD7746_VTSETUP_VTMD_EXT_TEMP,
 	},
@@ -156,7 +158,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT |
 		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
@@ -168,7 +171,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.channel2 = 2,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT |
 		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
@@ -179,7 +183,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.type = IIO_CAPACITANCE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT |
 		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
@@ -192,7 +197,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.indexed = 1,
 		.channel = 1,
 		.channel2 = 3,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT |
 		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
@@ -280,7 +286,7 @@ static inline ssize_t ad7746_start_calib(struct device *dev,
 					 size_t len,
 					 u8 regval)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7746_chip_info *chip = iio_priv(indio_dev);
 	bool doit;
 	int ret, timeout = 10;
@@ -319,7 +325,7 @@ static ssize_t ad7746_start_offset_calib(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	int ret = ad7746_select_channel(indio_dev,
 			      &ad7746_channels[to_iio_dev_attr(attr)->address]);
 	if (ret < 0)
@@ -334,7 +340,7 @@ static ssize_t ad7746_start_gain_calib(struct device *dev,
 				       const char *buf,
 				       size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	int ret = ad7746_select_channel(indio_dev,
 			      &ad7746_channels[to_iio_dev_attr(attr)->address]);
 	if (ret < 0)
@@ -359,7 +365,7 @@ static ssize_t ad7746_show_cap_filter_rate_setup(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7746_chip_info *chip = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", ad7746_cap_filter_rate_table[
@@ -371,7 +377,7 @@ static ssize_t ad7746_store_cap_filter_rate_setup(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7746_chip_info *chip = iio_priv(indio_dev);
 	u8 data;
 	int ret, i;
@@ -399,7 +405,7 @@ static ssize_t ad7746_show_vt_filter_rate_setup(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7746_chip_info *chip = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", ad7746_vt_filter_rate_table[
@@ -411,7 +417,7 @@ static ssize_t ad7746_store_vt_filter_rate_setup(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7746_chip_info *chip = iio_priv(indio_dev);
 	u8 data;
 	int ret, i;
@@ -572,7 +578,8 @@ static int ad7746_read_raw(struct iio_dev *indio_dev,
 	mutex_lock(&indio_dev->mlock);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
 		ret = ad7746_select_channel(indio_dev, chan);
 		if (ret < 0)
 			goto out;
@@ -696,7 +703,7 @@ static int __devinit ad7746_probe(struct i2c_client *client,
 	int ret = 0;
 	unsigned char regval = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -756,7 +763,7 @@ static int __devinit ad7746_probe(struct i2c_client *client,
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -766,7 +773,7 @@ static int __devexit ad7746_remove(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 
 	iio_device_unregister(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/consumer.h b/drivers/staging/iio/consumer.h
deleted file mode 100644
index 36a060cd3a21..000000000000
--- a/drivers/staging/iio/consumer.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Industrial I/O in kernel consumer interface
- *
- * Copyright (c) 2011 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef _IIO_INKERN_CONSUMER_H_
-#define _IIO_INKERN_CONSUMER_H
-#include "types.h"
-
-struct iio_dev;
-struct iio_chan_spec;
-
-/**
- * struct iio_channel - everything needed for a consumer to use a channel
- * @indio_dev:		Device on which the channel exists.
- * @channel:		Full description of the channel.
- */
-struct iio_channel {
-	struct iio_dev *indio_dev;
-	const struct iio_chan_spec *channel;
-};
-
-/**
- * iio_channel_get() - get description of all that is needed to access channel.
- * @name:		Unique name of the device as provided in the iio_map
- *			with which the desired provider to consumer mapping
- *			was registered.
- * @consumer_channel:	Unique name to identify the channel on the consumer
- *			side. This typically describes the channels use within
- *			the consumer. E.g. 'battery_voltage'
- */
-struct iio_channel *iio_st_channel_get(const char *name,
-				       const char *consumer_channel);
-
-/**
- * iio_st_channel_release() - release channels obtained via iio_st_channel_get
- * @chan:		The channel to be released.
- */
-void iio_st_channel_release(struct iio_channel *chan);
-
-/**
- * iio_st_channel_get_all() - get all channels associated with a client
- * @name:		name of consumer device.
- *
- * Returns an array of iio_channel structures terminated with one with
- * null iio_dev pointer.
- * This function is used by fairly generic consumers to get all the
- * channels registered as having this consumer.
- */
-struct iio_channel *iio_st_channel_get_all(const char *name);
-
-/**
- * iio_st_channel_release_all() - reverse iio_st_get_all
- * @chan:		Array of channels to be released.
- */
-void iio_st_channel_release_all(struct iio_channel *chan);
-
-/**
- * iio_st_read_channel_raw() - read from a given channel
- * @channel:		The channel being queried.
- * @val:		Value read back.
- *
- * Note raw reads from iio channels are in adc counts and hence
- * scale will need to be applied if standard units required.
- */
-int iio_st_read_channel_raw(struct iio_channel *chan,
-			    int *val);
-
-/**
- * iio_st_get_channel_type() - get the type of a channel
- * @channel:		The channel being queried.
- * @type:		The type of the channel.
- *
- * returns the enum iio_chan_type of the channel
- */
-int iio_st_get_channel_type(struct iio_channel *channel,
-			    enum iio_chan_type *type);
-
-/**
- * iio_st_read_channel_scale() - read the scale value for a channel
- * @channel:		The channel being queried.
- * @val:		First part of value read back.
- * @val2:		Second part of value read back.
- *
- * Note returns a description of what is in val and val2, such
- * as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val
- * + val2/1e6
- */
-int iio_st_read_channel_scale(struct iio_channel *chan, int *val,
-			      int *val2);
-
-#endif
diff --git a/drivers/staging/iio/dac/Kconfig b/drivers/staging/iio/dac/Kconfig
index a57803a5d1a7..a626f03871ec 100644
--- a/drivers/staging/iio/dac/Kconfig
+++ b/drivers/staging/iio/dac/Kconfig
@@ -56,12 +56,12 @@ config AD5624R_SPI
 	  AD5664R converters (DAC). This driver uses the common SPI interface.
 
 config AD5446
-	tristate "Analog Devices AD5444/6, AD5620/40/60 and AD5542A/12A DAC SPI driver"
+	tristate "Analog Devices AD5446 and similar single channel DACs driver"
 	depends on SPI
 	help
 	  Say yes here to build support for Analog Devices AD5444, AD5446,
-	  AD5512A, AD5542A, AD5543, AD5553, AD5601, AD5611, AD5620, AD5621,
-	  AD5640, AD5660, AD5662 DACs.
+	  AD5512A, AD5541A, AD5542A, AD5543, AD5553, AD5601, AD5611, AD5620,
+	  AD5621, AD5640, AD5660, AD5662 DACs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5446.
diff --git a/drivers/staging/iio/dac/ad5064.c b/drivers/staging/iio/dac/ad5064.c
index 06b162745a3e..047148aa66b2 100644
--- a/drivers/staging/iio/dac/ad5064.c
+++ b/drivers/staging/iio/dac/ad5064.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/regulator/consumer.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #define AD5064_MAX_DAC_CHANNELS			8
@@ -144,14 +144,14 @@ static const char ad5064_powerdown_modes[][15] = {
 };
 
 static ssize_t ad5064_read_powerdown_mode_available(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, char *buf)
+	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
 {
 	return sprintf(buf, "%s %s %s\n", ad5064_powerdown_modes[1],
 		ad5064_powerdown_modes[2], ad5064_powerdown_modes[3]);
 }
 
 static ssize_t ad5064_read_powerdown_mode(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, char *buf)
+	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
 {
 	struct ad5064_state *st = iio_priv(indio_dev);
 
@@ -160,7 +160,8 @@ static ssize_t ad5064_read_powerdown_mode(struct iio_dev *indio_dev,
 }
 
 static ssize_t ad5064_write_powerdown_mode(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, const char *buf, size_t len)
+	uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
+	size_t len)
 {
 	struct ad5064_state *st = iio_priv(indio_dev);
 	unsigned int mode, i;
@@ -187,7 +188,7 @@ static ssize_t ad5064_write_powerdown_mode(struct iio_dev *indio_dev,
 }
 
 static ssize_t ad5064_read_dac_powerdown(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, char *buf)
+	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
 {
 	struct ad5064_state *st = iio_priv(indio_dev);
 
@@ -195,7 +196,8 @@ static ssize_t ad5064_read_dac_powerdown(struct iio_dev *indio_dev,
 }
 
 static ssize_t ad5064_write_dac_powerdown(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, const char *buf, size_t len)
+	 uintptr_t private, const struct iio_chan_spec *chan, const char *buf,
+	 size_t len)
 {
 	struct ad5064_state *st = iio_priv(indio_dev);
 	bool pwr_down;
@@ -235,7 +237,7 @@ static int ad5064_read_raw(struct iio_dev *indio_dev,
 	int scale_uv;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		*val = st->dac_cache[chan->channel];
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
@@ -260,7 +262,7 @@ static int ad5064_write_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val > (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
@@ -308,7 +310,8 @@ static struct iio_chan_spec_ext_info ad5064_ext_info[] = {
 	.indexed = 1,						\
 	.output = 1,						\
 	.channel = (chan),					\
-	.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,	\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+	IIO_CHAN_INFO_SCALE_SEPARATE_BIT,			\
 	.address = AD5064_ADDR_DAC(chan),			\
 	.scan_type = IIO_ST('u', (bits), 16, 20 - (bits)),	\
 	.ext_info = ad5064_ext_info,				\
@@ -442,7 +445,7 @@ static int __devinit ad5064_probe(struct spi_device *spi)
 	unsigned int i;
 	int ret;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return  -ENOMEM;
 
@@ -499,7 +502,7 @@ error_free_reg:
 	if (!st->use_internal_vref)
 		regulator_bulk_free(ad5064_num_vref(st), st->vref_reg);
 error_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -517,7 +520,7 @@ static int __devexit ad5064_remove(struct spi_device *spi)
 		regulator_bulk_free(ad5064_num_vref(st), st->vref_reg);
 	}
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5360.c b/drivers/staging/iio/dac/ad5360.c
index cec3693b50a3..38660efca78a 100644
--- a/drivers/staging/iio/dac/ad5360.c
+++ b/drivers/staging/iio/dac/ad5360.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/regulator/consumer.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #define AD5360_CMD(x)				((x) << 22)
@@ -103,7 +103,8 @@ enum ad5360_type {
 	.type = IIO_VOLTAGE,					\
 	.indexed = 1,						\
 	.output = 1,						\
-	.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT |	\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |		\
 		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |		\
 		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |	\
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,	\
@@ -250,7 +251,7 @@ static ssize_t ad5360_read_dac_powerdown(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5360_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", (bool)(st->ctrl & AD5360_SF_CTRL_PWR_DOWN));
@@ -278,7 +279,7 @@ static int ad5360_update_ctrl(struct iio_dev *indio_dev, unsigned int set,
 static ssize_t ad5360_write_dac_powerdown(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	bool pwr_down;
 	int ret;
 
@@ -319,7 +320,7 @@ static int ad5360_write_raw(struct iio_dev *indio_dev,
 	unsigned int ofs_index;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= max_val || val < 0)
 			return -EINVAL;
 
@@ -376,7 +377,7 @@ static int ad5360_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = ad5360_read(indio_dev, AD5360_READBACK_X1A,
 			chan->address);
 		if (ret < 0)
@@ -464,7 +465,7 @@ static int __devinit ad5360_probe(struct spi_device *spi)
 	unsigned int i;
 	int ret;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		dev_err(&spi->dev, "Failed to allocate iio device\n");
 		return  -ENOMEM;
@@ -519,7 +520,7 @@ error_free_reg:
 error_free_channels:
 	kfree(indio_dev->channels);
 error_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -536,7 +537,7 @@ static int __devexit ad5360_remove(struct spi_device *spi)
 	regulator_bulk_disable(st->chip_info->num_vrefs, st->vref_reg);
 	regulator_bulk_free(st->chip_info->num_vrefs, st->vref_reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5380.c b/drivers/staging/iio/dac/ad5380.c
index 4c50716fa801..370d2842190e 100644
--- a/drivers/staging/iio/dac/ad5380.c
+++ b/drivers/staging/iio/dac/ad5380.c
@@ -18,8 +18,8 @@
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 
@@ -85,7 +85,8 @@ enum ad5380_type {
 	.type = IIO_VOLTAGE,					\
 	.indexed = 1,						\
 	.output = 1,						\
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |		\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |		\
 		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |		\
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,		\
 	.scan_type = IIO_ST('u', (_bits), 16, 14 - (_bits))	\
@@ -167,7 +168,7 @@ static const struct ad5380_chip_info ad5380_chip_info_tbl[] = {
 static ssize_t ad5380_read_dac_powerdown(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5380_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", st->pwr_down);
@@ -176,7 +177,7 @@ static ssize_t ad5380_read_dac_powerdown(struct device *dev,
 static ssize_t ad5380_write_dac_powerdown(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5380_state *st = iio_priv(indio_dev);
 	bool pwr_down;
 	int ret;
@@ -212,7 +213,7 @@ static const char ad5380_powerdown_modes[][15] = {
 static ssize_t ad5380_read_powerdown_mode(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5380_state *st = iio_priv(indio_dev);
 	unsigned int mode;
 	int ret;
@@ -229,7 +230,7 @@ static ssize_t ad5380_read_powerdown_mode(struct device *dev,
 static ssize_t ad5380_write_powerdown_mode(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5380_state *st = iio_priv(indio_dev);
 	unsigned int i;
 	int ret;
@@ -292,7 +293,7 @@ static int ad5380_write_raw(struct iio_dev *indio_dev,
 	struct ad5380_state *st = iio_priv(indio_dev);
 
 	switch (info) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 	case IIO_CHAN_INFO_CALIBSCALE:
 		if (val >= max_val || val < 0)
 			return -EINVAL;
@@ -322,7 +323,7 @@ static int ad5380_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (info) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 	case IIO_CHAN_INFO_CALIBSCALE:
 		ret = regmap_read(st->regmap, ad5380_info_to_reg(chan, info),
 					val);
@@ -388,7 +389,7 @@ static int __devinit ad5380_probe(struct device *dev, struct regmap *regmap,
 	unsigned int ctrl = 0;
 	int ret;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		dev_err(dev, "Failed to allocate iio device\n");
 		ret = -ENOMEM;
@@ -454,7 +455,7 @@ error_free_reg:
 
 	kfree(indio_dev->channels);
 error_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_regmap_exit:
 	regmap_exit(regmap);
 
@@ -476,7 +477,7 @@ static int __devexit ad5380_remove(struct device *dev)
 	}
 
 	regmap_exit(st->regmap);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5421.c b/drivers/staging/iio/dac/ad5421.c
index 0b040b204697..ffbd4c234f57 100644
--- a/drivers/staging/iio/dac/ad5421.c
+++ b/drivers/staging/iio/dac/ad5421.c
@@ -16,9 +16,9 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 #include "dac.h"
 #include "ad5421.h"
 
@@ -87,7 +87,8 @@ static const struct iio_chan_spec ad5421_channels[] = {
 		.indexed = 1,
 		.output = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SHARED_BIT |
 			IIO_CHAN_INFO_OFFSET_SHARED_BIT |
 			IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
 			IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
@@ -304,7 +305,7 @@ static int ad5421_read_raw(struct iio_dev *indio_dev,
 		return -EINVAL;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = ad5421_read(indio_dev, AD5421_REG_DAC_DATA);
 		if (ret < 0)
 			return ret;
@@ -340,7 +341,7 @@ static int ad5421_write_raw(struct iio_dev *indio_dev,
 	const unsigned int max_val = 1 << 16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= max_val || val < 0)
 			return -EINVAL;
 
@@ -456,7 +457,7 @@ static int __devinit ad5421_probe(struct spi_device *spi)
 	struct ad5421_state *st;
 	int ret;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		dev_err(&spi->dev, "Failed to allocate iio device\n");
 		return  -ENOMEM;
@@ -511,7 +512,7 @@ error_free_irq:
 	if (spi->irq)
 		free_irq(spi->irq, indio_dev);
 error_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -523,7 +524,7 @@ static int __devexit ad5421_remove(struct spi_device *spi)
 	iio_device_unregister(indio_dev);
 	if (spi->irq)
 		free_irq(spi->irq, indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5446.c b/drivers/staging/iio/dac/ad5446.c
index 633ffbb21814..daa65b384c13 100644
--- a/drivers/staging/iio/dac/ad5446.c
+++ b/drivers/staging/iio/dac/ad5446.c
@@ -18,229 +18,212 @@
 #include <linux/err.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #include "ad5446.h"
 
-static void ad5446_store_sample(struct ad5446_state *st, unsigned val)
+static int ad5446_write(struct ad5446_state *st, unsigned val)
 {
-	st->data.d16 = cpu_to_be16(AD5446_LOAD | val);
+	__be16 data = cpu_to_be16(val);
+	return spi_write(st->spi, &data, sizeof(data));
 }
 
-static void ad5542_store_sample(struct ad5446_state *st, unsigned val)
+static int ad5660_write(struct ad5446_state *st, unsigned val)
 {
-	st->data.d16 = cpu_to_be16(val);
-}
+	uint8_t data[3];
 
-static void ad5620_store_sample(struct ad5446_state *st, unsigned val)
-{
-	st->data.d16 = cpu_to_be16(AD5620_LOAD | val);
-}
+	data[0] = (val >> 16) & 0xFF;
+	data[1] = (val >> 8) & 0xFF;
+	data[2] = val & 0xFF;
 
-static void ad5660_store_sample(struct ad5446_state *st, unsigned val)
-{
-	val |= AD5660_LOAD;
-	st->data.d24[0] = (val >> 16) & 0xFF;
-	st->data.d24[1] = (val >> 8) & 0xFF;
-	st->data.d24[2] = val & 0xFF;
+	return spi_write(st->spi, data, sizeof(data));
 }
 
-static void ad5620_store_pwr_down(struct ad5446_state *st, unsigned mode)
-{
-	st->data.d16 = cpu_to_be16(mode << 14);
-}
+static const char * const ad5446_powerdown_modes[] = {
+	"", "1kohm_to_gnd", "100kohm_to_gnd", "three_state"
+};
 
-static void ad5660_store_pwr_down(struct ad5446_state *st, unsigned mode)
+static ssize_t ad5446_read_powerdown_mode_available(struct iio_dev *indio_dev,
+	uintptr_t private, const struct iio_chan_spec *chan, char *buf)
 {
-	unsigned val = mode << 16;
-
-	st->data.d24[0] = (val >> 16) & 0xFF;
-	st->data.d24[1] = (val >> 8) & 0xFF;
-	st->data.d24[2] = val & 0xFF;
+	return sprintf(buf, "%s %s %s\n", ad5446_powerdown_modes[1],
+		ad5446_powerdown_modes[2], ad5446_powerdown_modes[3]);
 }
 
-static ssize_t ad5446_write_powerdown_mode(struct device *dev,
-				       struct device_attribute *attr,
-				       const char *buf, size_t len)
+static ssize_t ad5446_write_powerdown_mode(struct iio_dev *indio_dev,
+					    uintptr_t private,
+					    const struct iio_chan_spec *chan,
+					    const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad5446_state *st = iio_priv(indio_dev);
+	int i;
 
-	if (sysfs_streq(buf, "1kohm_to_gnd"))
-		st->pwr_down_mode = MODE_PWRDWN_1k;
-	else if (sysfs_streq(buf, "100kohm_to_gnd"))
-		st->pwr_down_mode = MODE_PWRDWN_100k;
-	else if (sysfs_streq(buf, "three_state"))
-		st->pwr_down_mode = MODE_PWRDWN_TRISTATE;
-	else
+	for (i = 1; i < ARRAY_SIZE(ad5446_powerdown_modes); i++) {
+		if (sysfs_streq(buf, ad5446_powerdown_modes[i])) {
+			st->pwr_down_mode = i;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(ad5446_powerdown_modes))
 		return -EINVAL;
 
 	return len;
 }
 
-static ssize_t ad5446_read_powerdown_mode(struct device *dev,
-				      struct device_attribute *attr, char *buf)
+static ssize_t ad5446_read_powerdown_mode(struct iio_dev *indio_dev,
+					   uintptr_t private,
+					   const struct iio_chan_spec *chan,
+					   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad5446_state *st = iio_priv(indio_dev);
 
-	char mode[][15] = {"", "1kohm_to_gnd", "100kohm_to_gnd", "three_state"};
-
-	return sprintf(buf, "%s\n", mode[st->pwr_down_mode]);
+	return sprintf(buf, "%s\n", ad5446_powerdown_modes[st->pwr_down_mode]);
 }
 
-static ssize_t ad5446_read_dac_powerdown(struct device *dev,
-					   struct device_attribute *attr,
+static ssize_t ad5446_read_dac_powerdown(struct iio_dev *indio_dev,
+					   uintptr_t private,
+					   const struct iio_chan_spec *chan,
 					   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad5446_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", st->pwr_down);
 }
 
-static ssize_t ad5446_write_dac_powerdown(struct device *dev,
-					    struct device_attribute *attr,
+static ssize_t ad5446_write_dac_powerdown(struct iio_dev *indio_dev,
+					    uintptr_t private,
+					    const struct iio_chan_spec *chan,
 					    const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ad5446_state *st = iio_priv(indio_dev);
-	unsigned long readin;
+	unsigned int shift;
+	unsigned int val;
+	bool powerdown;
 	int ret;
 
-	ret = strict_strtol(buf, 10, &readin);
+	ret = strtobool(buf, &powerdown);
 	if (ret)
 		return ret;
 
-	if (readin > 1)
-		ret = -EINVAL;
-
 	mutex_lock(&indio_dev->mlock);
-	st->pwr_down = readin;
+	st->pwr_down = powerdown;
 
-	if (st->pwr_down)
-		st->chip_info->store_pwr_down(st, st->pwr_down_mode);
-	else
-		st->chip_info->store_sample(st, st->cached_val);
+	if (st->pwr_down) {
+		shift = chan->scan_type.realbits + chan->scan_type.shift;
+		val = st->pwr_down_mode << shift;
+	} else {
+		val = st->cached_val;
+	}
 
-	ret = spi_sync(st->spi, &st->msg);
+	ret = st->chip_info->write(st, val);
 	mutex_unlock(&indio_dev->mlock);
 
 	return ret ? ret : len;
 }
 
-static IIO_DEVICE_ATTR(out_voltage_powerdown_mode, S_IRUGO | S_IWUSR,
-			ad5446_read_powerdown_mode,
-			ad5446_write_powerdown_mode, 0);
-
-static IIO_CONST_ATTR(out_voltage_powerdown_mode_available,
-			"1kohm_to_gnd 100kohm_to_gnd three_state");
-
-static IIO_DEVICE_ATTR(out_voltage0_powerdown, S_IRUGO | S_IWUSR,
-			ad5446_read_dac_powerdown,
-			ad5446_write_dac_powerdown, 0);
-
-static struct attribute *ad5446_attributes[] = {
-	&iio_dev_attr_out_voltage0_powerdown.dev_attr.attr,
-	&iio_dev_attr_out_voltage_powerdown_mode.dev_attr.attr,
-	&iio_const_attr_out_voltage_powerdown_mode_available.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group ad5446_attribute_group = {
-	.attrs = ad5446_attributes,
+static const struct iio_chan_spec_ext_info ad5064_ext_info_powerdown[] = {
+	{
+		.name = "powerdown",
+		.read = ad5446_read_dac_powerdown,
+		.write = ad5446_write_dac_powerdown,
+	}, {
+		.name = "powerdown_mode",
+		.read = ad5446_read_powerdown_mode,
+		.write = ad5446_write_powerdown_mode,
+	}, {
+		.name = "powerdown_mode_available",
+		.shared = true,
+		.read = ad5446_read_powerdown_mode_available,
+	},
+	{ },
 };
 
-#define AD5446_CHANNEL(bits, storage, shift) { \
+#define _AD5446_CHANNEL(bits, storage, shift, ext) { \
 	.type = IIO_VOLTAGE, \
 	.indexed = 1, \
 	.output = 1, \
 	.channel = 0, \
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \
-	.scan_type = IIO_ST('u', (bits), (storage), (shift)) \
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+	IIO_CHAN_INFO_SCALE_SHARED_BIT,	\
+	.scan_type = IIO_ST('u', (bits), (storage), (shift)), \
+	.ext_info = (ext), \
 }
 
+#define AD5446_CHANNEL(bits, storage, shift) \
+	_AD5446_CHANNEL(bits, storage, shift, NULL)
+
+#define AD5446_CHANNEL_POWERDOWN(bits, storage, shift) \
+	_AD5446_CHANNEL(bits, storage, shift, ad5064_ext_info_powerdown)
+
 static const struct ad5446_chip_info ad5446_chip_info_tbl[] = {
 	[ID_AD5444] = {
 		.channel = AD5446_CHANNEL(12, 16, 2),
-		.store_sample = ad5446_store_sample,
+		.write = ad5446_write,
 	},
 	[ID_AD5446] = {
 		.channel = AD5446_CHANNEL(14, 16, 0),
-		.store_sample = ad5446_store_sample,
+		.write = ad5446_write,
 	},
 	[ID_AD5541A] = {
 		.channel = AD5446_CHANNEL(16, 16, 0),
-		.store_sample = ad5542_store_sample,
-	},
-	[ID_AD5542A] = {
-		.channel = AD5446_CHANNEL(16, 16, 0),
-		.store_sample = ad5542_store_sample,
-	},
-	[ID_AD5543] = {
-		.channel = AD5446_CHANNEL(16, 16, 0),
-		.store_sample = ad5542_store_sample,
+		.write = ad5446_write,
 	},
 	[ID_AD5512A] = {
 		.channel = AD5446_CHANNEL(12, 16, 4),
-		.store_sample = ad5542_store_sample,
+		.write = ad5446_write,
 	},
 	[ID_AD5553] = {
 		.channel = AD5446_CHANNEL(14, 16, 0),
-		.store_sample = ad5542_store_sample,
+		.write = ad5446_write,
 	},
 	[ID_AD5601] = {
-		.channel = AD5446_CHANNEL(8, 16, 6),
-		.store_sample = ad5542_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6),
+		.write = ad5446_write,
 	},
 	[ID_AD5611] = {
-		.channel = AD5446_CHANNEL(10, 16, 4),
-		.store_sample = ad5542_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 4),
+		.write = ad5446_write,
 	},
 	[ID_AD5621] = {
-		.channel = AD5446_CHANNEL(12, 16, 2),
-		.store_sample = ad5542_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
+		.write = ad5446_write,
 	},
 	[ID_AD5620_2500] = {
-		.channel = AD5446_CHANNEL(12, 16, 2),
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
 		.int_vref_mv = 2500,
-		.store_sample = ad5620_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.write = ad5446_write,
 	},
 	[ID_AD5620_1250] = {
-		.channel = AD5446_CHANNEL(12, 16, 2),
+		.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
 		.int_vref_mv = 1250,
-		.store_sample = ad5620_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.write = ad5446_write,
 	},
 	[ID_AD5640_2500] = {
-		.channel = AD5446_CHANNEL(14, 16, 0),
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
 		.int_vref_mv = 2500,
-		.store_sample = ad5620_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.write = ad5446_write,
 	},
 	[ID_AD5640_1250] = {
-		.channel = AD5446_CHANNEL(14, 16, 0),
+		.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
 		.int_vref_mv = 1250,
-		.store_sample = ad5620_store_sample,
-		.store_pwr_down = ad5620_store_pwr_down,
+		.write = ad5446_write,
 	},
 	[ID_AD5660_2500] = {
-		.channel = AD5446_CHANNEL(16, 16, 0),
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
 		.int_vref_mv = 2500,
-		.store_sample = ad5660_store_sample,
-		.store_pwr_down = ad5660_store_pwr_down,
+		.write = ad5660_write,
 	},
 	[ID_AD5660_1250] = {
-		.channel = AD5446_CHANNEL(16, 16, 0),
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
 		.int_vref_mv = 1250,
-		.store_sample = ad5660_store_sample,
-		.store_pwr_down = ad5660_store_pwr_down,
+		.write = ad5660_write,
+	},
+	[ID_AD5662] = {
+		.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
+		.write = ad5660_write,
 	},
 };
 
@@ -254,6 +237,9 @@ static int ad5446_read_raw(struct iio_dev *indio_dev,
 	unsigned long scale_uv;
 
 	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		*val = st->cached_val;
+		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		scale_uv = (st->vref_mv * 1000) >> chan->scan_type.realbits;
 		*val =  scale_uv / 1000;
@@ -271,18 +257,18 @@ static int ad5446_write_raw(struct iio_dev *indio_dev,
 			       long mask)
 {
 	struct ad5446_state *st = iio_priv(indio_dev);
-	int ret;
+	int ret = 0;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
 		val <<= chan->scan_type.shift;
 		mutex_lock(&indio_dev->mlock);
 		st->cached_val = val;
-		st->chip_info->store_sample(st, val);
-		ret = spi_sync(st->spi, &st->msg);
+		if (!st->pwr_down)
+			ret = st->chip_info->write(st, val);
 		mutex_unlock(&indio_dev->mlock);
 		break;
 	default:
@@ -295,13 +281,6 @@ static int ad5446_write_raw(struct iio_dev *indio_dev,
 static const struct iio_info ad5446_info = {
 	.read_raw = ad5446_read_raw,
 	.write_raw = ad5446_write_raw,
-	.attrs = &ad5446_attribute_group,
-	.driver_module = THIS_MODULE,
-};
-
-static const struct iio_info ad5446_info_no_pwr_down = {
-	.read_raw = ad5446_read_raw,
-	.write_raw = ad5446_write_raw,
 	.driver_module = THIS_MODULE,
 };
 
@@ -321,7 +300,7 @@ static int __devinit ad5446_probe(struct spi_device *spi)
 		voltage_uv = regulator_get_voltage(reg);
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_disable_reg;
@@ -337,38 +316,17 @@ static int __devinit ad5446_probe(struct spi_device *spi)
 	/* Establish that the iio_dev is a child of the spi device */
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->name = spi_get_device_id(spi)->name;
-	if (st->chip_info->store_pwr_down)
-		indio_dev->info = &ad5446_info;
-	else
-		indio_dev->info = &ad5446_info_no_pwr_down;
+	indio_dev->info = &ad5446_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = &st->chip_info->channel;
 	indio_dev->num_channels = 1;
 
-	/* Setup default message */
-
-	st->xfer.tx_buf = &st->data;
-	st->xfer.len = st->chip_info->channel.scan_type.storagebits / 8;
-
-	spi_message_init(&st->msg);
-	spi_message_add_tail(&st->xfer, &st->msg);
-
-	switch (spi_get_device_id(spi)->driver_data) {
-	case ID_AD5620_2500:
-	case ID_AD5620_1250:
-	case ID_AD5640_2500:
-	case ID_AD5640_1250:
-	case ID_AD5660_2500:
-	case ID_AD5660_1250:
+	if (st->chip_info->int_vref_mv)
 		st->vref_mv = st->chip_info->int_vref_mv;
-		break;
-	default:
-		if (voltage_uv)
-			st->vref_mv = voltage_uv / 1000;
-		else
-			dev_warn(&spi->dev,
-				 "reference voltage unspecified\n");
-	}
+	else if (voltage_uv)
+		st->vref_mv = voltage_uv / 1000;
+	else
+		dev_warn(&spi->dev, "reference voltage unspecified\n");
 
 	ret = iio_device_register(indio_dev);
 	if (ret)
@@ -377,7 +335,7 @@ static int __devinit ad5446_probe(struct spi_device *spi)
 	return 0;
 
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_disable_reg:
 	if (!IS_ERR(reg))
 		regulator_disable(reg);
@@ -398,7 +356,7 @@ static int ad5446_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
@@ -408,8 +366,8 @@ static const struct spi_device_id ad5446_id[] = {
 	{"ad5446", ID_AD5446},
 	{"ad5512a", ID_AD5512A},
 	{"ad5541a", ID_AD5541A},
-	{"ad5542a", ID_AD5542A},
-	{"ad5543", ID_AD5543},
+	{"ad5542a", ID_AD5541A}, /* ad5541a and ad5542a are compatible */
+	{"ad5543", ID_AD5541A}, /* ad5541a and ad5543 are compatible */
 	{"ad5553", ID_AD5553},
 	{"ad5601", ID_AD5601},
 	{"ad5611", ID_AD5611},
@@ -420,6 +378,7 @@ static const struct spi_device_id ad5446_id[] = {
 	{"ad5640-1250", ID_AD5640_1250},
 	{"ad5660-2500", ID_AD5660_2500},
 	{"ad5660-1250", ID_AD5660_1250},
+	{"ad5662", ID_AD5662},
 	{}
 };
 MODULE_DEVICE_TABLE(spi, ad5446_id);
diff --git a/drivers/staging/iio/dac/ad5446.h b/drivers/staging/iio/dac/ad5446.h
index 4ea3476fb065..dfd68ce7427e 100644
--- a/drivers/staging/iio/dac/ad5446.h
+++ b/drivers/staging/iio/dac/ad5446.h
@@ -34,43 +34,30 @@
  * @spi:		spi_device
  * @chip_info:		chip model specific constants, available modes etc
  * @reg:		supply regulator
- * @poll_work:		bottom half of polling interrupt handler
  * @vref_mv:		actual reference voltage used
- * @xfer:		default spi transfer
- * @msg:		default spi message
- * @data:		spi transmit buffer
  */
 
 struct ad5446_state {
 	struct spi_device		*spi;
 	const struct ad5446_chip_info	*chip_info;
 	struct regulator		*reg;
-	struct work_struct		poll_work;
 	unsigned short			vref_mv;
 	unsigned			cached_val;
 	unsigned			pwr_down_mode;
 	unsigned			pwr_down;
-	struct spi_transfer		xfer;
-	struct spi_message		msg;
-	union {
-		unsigned short		d16;
-		unsigned char		d24[3];
-	} data;
 };
 
 /**
  * struct ad5446_chip_info - chip specific information
  * @channel:		channel spec for the DAC
  * @int_vref_mv:	AD5620/40/60: the internal reference voltage
- * @store_sample:	chip specific helper function to store the datum
- * @store_sample:	chip specific helper function to store the powerpown cmd
+ * @write:		chip specific helper function to write to the register
  */
 
 struct ad5446_chip_info {
 	struct iio_chan_spec	channel;
 	u16			int_vref_mv;
-	void (*store_sample)	(struct ad5446_state *st, unsigned val);
-	void (*store_pwr_down)	(struct ad5446_state *st, unsigned mode);
+	int			(*write)(struct ad5446_state *st, unsigned val);
 };
 
 /**
@@ -85,8 +72,6 @@ enum ad5446_supported_device_ids {
 	ID_AD5444,
 	ID_AD5446,
 	ID_AD5541A,
-	ID_AD5542A,
-	ID_AD5543,
 	ID_AD5512A,
 	ID_AD5553,
 	ID_AD5601,
@@ -98,6 +83,7 @@ enum ad5446_supported_device_ids {
 	ID_AD5640_1250,
 	ID_AD5660_2500,
 	ID_AD5660_1250,
+	ID_AD5662,
 };
 
 #endif /* IIO_DAC_AD5446_H_ */
diff --git a/drivers/staging/iio/dac/ad5504.c b/drivers/staging/iio/dac/ad5504.c
index bc17205fe722..019cf15cd24a 100644
--- a/drivers/staging/iio/dac/ad5504.c
+++ b/drivers/staging/iio/dac/ad5504.c
@@ -16,9 +16,9 @@
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 #include "dac.h"
 #include "ad5504.h"
 
@@ -27,7 +27,8 @@
 	.indexed = 1, \
 	.output = 1, \
 	.channel = (_chan), \
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+		     IIO_CHAN_INFO_SCALE_SHARED_BIT, \
 	.address = AD5504_ADDR_DAC(_chan), \
 	.scan_type = IIO_ST('u', 12, 16, 0), \
 }
@@ -81,7 +82,7 @@ static int ad5504_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = ad5504_spi_read(st->spi, chan->address);
 		if (ret < 0)
 			return ret;
@@ -109,7 +110,7 @@ static int ad5504_write_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
@@ -124,7 +125,7 @@ static int ad5504_write_raw(struct iio_dev *indio_dev,
 static ssize_t ad5504_read_powerdown_mode(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5504_state *st = iio_priv(indio_dev);
 
 	const char mode[][14] = {"20kohm_to_gnd", "three_state"};
@@ -136,7 +137,7 @@ static ssize_t ad5504_write_powerdown_mode(struct device *dev,
 				       struct device_attribute *attr,
 				       const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5504_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -154,7 +155,7 @@ static ssize_t ad5504_read_dac_powerdown(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5504_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -168,7 +169,7 @@ static ssize_t ad5504_write_dac_powerdown(struct device *dev,
 {
 	long readin;
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5504_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -287,7 +288,7 @@ static int __devinit ad5504_probe(struct spi_device *spi)
 	struct regulator *reg;
 	int ret, voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -350,7 +351,7 @@ error_put_reg:
 	if (!IS_ERR(reg))
 		regulator_put(reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -368,7 +369,7 @@ static int __devexit ad5504_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5624r_spi.c b/drivers/staging/iio/dac/ad5624r_spi.c
index 10c7484366ef..42ff644ac43e 100644
--- a/drivers/staging/iio/dac/ad5624r_spi.c
+++ b/drivers/staging/iio/dac/ad5624r_spi.c
@@ -16,8 +16,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 #include "ad5624r.h"
 
@@ -26,7 +26,8 @@
 	.indexed = 1, \
 	.output = 1, \
 	.channel = (_chan), \
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+		     IIO_CHAN_INFO_SCALE_SHARED_BIT, \
 	.address = (_chan), \
 	.scan_type = IIO_ST('u', (_bits), 16, 16 - (_bits)), \
 }
@@ -122,7 +123,7 @@ static int ad5624r_write_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
@@ -140,7 +141,7 @@ static int ad5624r_write_raw(struct iio_dev *indio_dev,
 static ssize_t ad5624r_read_powerdown_mode(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5624r_state *st = iio_priv(indio_dev);
 
 	char mode[][15] = {"", "1kohm_to_gnd", "100kohm_to_gnd", "three_state"};
@@ -152,7 +153,7 @@ static ssize_t ad5624r_write_powerdown_mode(struct device *dev,
 				       struct device_attribute *attr,
 				       const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5624r_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -172,7 +173,7 @@ static ssize_t ad5624r_read_dac_powerdown(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5624r_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -186,7 +187,7 @@ static ssize_t ad5624r_write_dac_powerdown(struct device *dev,
 {
 	long readin;
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5624r_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -255,7 +256,7 @@ static int __devinit ad5624r_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	int ret, voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -305,7 +306,7 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 
 	return ret;
@@ -321,7 +322,7 @@ static int __devexit ad5624r_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5686.c b/drivers/staging/iio/dac/ad5686.c
index 2415a6e60c77..c1e903ebc7b9 100644
--- a/drivers/staging/iio/dac/ad5686.c
+++ b/drivers/staging/iio/dac/ad5686.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/regulator/consumer.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #define AD5686_DAC_CHANNELS			4
@@ -98,7 +98,8 @@ enum ad5686_supported_device_ids {
 		.indexed = 1,					\
 		.output = 1,					\
 		.channel = chan,				\
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,	\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,			\
 		.address = AD5686_ADDR_DAC(chan),			\
 		.scan_type = IIO_ST('u', bits, 16, shift)	\
 }
@@ -172,7 +173,7 @@ static int ad5686_spi_read(struct ad5686_state *st, u8 addr)
 static ssize_t ad5686_read_powerdown_mode(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5686_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -186,7 +187,7 @@ static ssize_t ad5686_write_powerdown_mode(struct device *dev,
 				       struct device_attribute *attr,
 				       const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5686_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	unsigned mode;
@@ -210,7 +211,7 @@ static ssize_t ad5686_read_dac_powerdown(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5686_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -224,7 +225,7 @@ static ssize_t ad5686_write_dac_powerdown(struct device *dev,
 {
 	bool readin;
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5686_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -296,7 +297,7 @@ static int ad5686_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		ret = ad5686_spi_read(st, chan->address);
 		mutex_unlock(&indio_dev->mlock);
@@ -326,7 +327,7 @@ static int ad5686_write_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val > (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
@@ -358,7 +359,7 @@ static int __devinit ad5686_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	int ret, regdone = 0, voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return  -ENOMEM;
 
@@ -410,7 +411,7 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -425,7 +426,7 @@ static int __devexit ad5686_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5764.c b/drivers/staging/iio/dac/ad5764.c
index f73a73079490..03dbd937b081 100644
--- a/drivers/staging/iio/dac/ad5764.c
+++ b/drivers/staging/iio/dac/ad5764.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/regulator/consumer.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #define AD5764_REG_SF_NOP			0x0
@@ -79,7 +79,8 @@ enum ad5764_type {
 	.output = 1,						\
 	.channel = (_chan),					\
 	.address = (_chan),					\
-	.info_mask = IIO_CHAN_INFO_OFFSET_SHARED_BIT |		\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+		IIO_CHAN_INFO_OFFSET_SHARED_BIT |		\
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |		\
 		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |		\
 		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,		\
@@ -188,7 +189,7 @@ static int ad5764_write_raw(struct iio_dev *indio_dev,
 	unsigned int reg;
 
 	switch (info) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (val >= max_val || val < 0)
 			return -EINVAL;
 		val <<= chan->scan_type.shift;
@@ -228,7 +229,7 @@ static int ad5764_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (info) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		reg = AD5764_REG_DATA(chan->address);
 		ret = ad5764_read(indio_dev, reg, val);
 		if (ret < 0)
@@ -280,7 +281,7 @@ static int __devinit ad5764_probe(struct spi_device *spi)
 	struct ad5764_state *st;
 	int ret;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		dev_err(&spi->dev, "Failed to allocate iio device\n");
 		return -ENOMEM;
@@ -335,7 +336,7 @@ error_free_reg:
 	if (st->chip_info->int_vref == 0)
 		regulator_bulk_free(ARRAY_SIZE(st->vref_reg), st->vref_reg);
 error_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -352,7 +353,7 @@ static int __devexit ad5764_remove(struct spi_device *spi)
 		regulator_bulk_free(ARRAY_SIZE(st->vref_reg), st->vref_reg);
 	}
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/ad5791.c b/drivers/staging/iio/dac/ad5791.c
index ac45636a8d72..13d8b5bb1cea 100644
--- a/drivers/staging/iio/dac/ad5791.c
+++ b/drivers/staging/iio/dac/ad5791.c
@@ -17,8 +17,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 #include "ad5791.h"
 
@@ -78,7 +78,8 @@ static int ad5791_spi_read(struct spi_device *spi, u8 addr, u32 *val)
 	.indexed = 1,					\
 	.address = AD5791_ADDR_DAC0,			\
 	.channel = 0,					\
-	.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT | \
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |	\
 		IIO_CHAN_INFO_OFFSET_SHARED_BIT,	\
 	.scan_type = IIO_ST('u', bits, 24, shift)	\
 }
@@ -93,7 +94,7 @@ static const struct iio_chan_spec ad5791_channels[] = {
 static ssize_t ad5791_read_powerdown_mode(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5791_state *st = iio_priv(indio_dev);
 
 	const char mode[][14] = {"6kohm_to_gnd", "three_state"};
@@ -105,7 +106,7 @@ static ssize_t ad5791_write_powerdown_mode(struct device *dev,
 				       struct device_attribute *attr,
 				       const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5791_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -123,7 +124,7 @@ static ssize_t ad5791_read_dac_powerdown(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5791_state *st = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", st->pwr_down);
@@ -135,7 +136,7 @@ static ssize_t ad5791_write_dac_powerdown(struct device *dev,
 {
 	long readin;
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5791_state *st = iio_priv(indio_dev);
 
 	ret = strict_strtol(buf, 10, &readin);
@@ -231,7 +232,7 @@ static int ad5791_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = ad5791_spi_read(st->spi, chan->address, val);
 		if (ret)
 			return ret;
@@ -263,7 +264,7 @@ static int ad5791_write_raw(struct iio_dev *indio_dev,
 	struct ad5791_state *st = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		val &= AD5791_RES_MASK(chan->scan_type.realbits);
 		val <<= chan->scan_type.shift;
 
@@ -288,7 +289,7 @@ static int __devinit ad5791_probe(struct spi_device *spi)
 	struct ad5791_state *st;
 	int ret, pos_voltage_uv = 0, neg_voltage_uv = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -368,7 +369,7 @@ error_put_reg_neg:
 error_put_reg_pos:
 	if (!IS_ERR(st->reg_vdd))
 		regulator_put(st->reg_vdd);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 
 	return ret;
@@ -389,7 +390,7 @@ static int __devexit ad5791_remove(struct spi_device *spi)
 		regulator_disable(st->reg_vss);
 		regulator_put(st->reg_vss);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dac/max517.c b/drivers/staging/iio/dac/max517.c
index 41483c72cec1..5287cad1f3a4 100644
--- a/drivers/staging/iio/dac/max517.c
+++ b/drivers/staging/iio/dac/max517.c
@@ -25,8 +25,8 @@
 #include <linux/i2c.h>
 #include <linux/err.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dac.h"
 
 #include "max517.h"
@@ -59,7 +59,7 @@ static ssize_t max517_set_value(struct device *dev,
 				 struct device_attribute *attr,
 				 const char *buf, size_t count, int channel)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct max517_data *data = iio_priv(indio_dev);
 	struct i2c_client *client = data->client;
 	u8 outbuf[4]; /* 1x or 2x command + value */
@@ -128,7 +128,7 @@ static ssize_t max517_show_scale(struct device *dev,
 				struct device_attribute *attr,
 				char *buf, int channel)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct max517_data *data = iio_priv(indio_dev);
 	/* Corresponds to Vref / 2^(bits) */
 	unsigned int scale_uv = (data->vref_mv[channel - 1] * 1000) >> 8;
@@ -218,7 +218,7 @@ static int max517_probe(struct i2c_client *client,
 	struct max517_platform_data *platform_data = client->dev.platform_data;
 	int err;
 
-	indio_dev = iio_allocate_device(sizeof(*data));
+	indio_dev = iio_device_alloc(sizeof(*data));
 	if (indio_dev == NULL) {
 		err = -ENOMEM;
 		goto exit;
@@ -257,14 +257,15 @@ static int max517_probe(struct i2c_client *client,
 	return 0;
 
 exit_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 exit:
 	return err;
 }
 
 static int max517_remove(struct i2c_client *client)
 {
-	iio_free_device(i2c_get_clientdata(client));
+	iio_device_unregister(i2c_get_clientdata(client));
+	iio_device_free(i2c_get_clientdata(client));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/dds.h b/drivers/staging/iio/dds/dds.h
deleted file mode 100644
index d8ac3a93baf6..000000000000
--- a/drivers/staging/iio/dds/dds.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * dds.h - sysfs attributes associated with DDS devices
- *
- * Copyright (c) 2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-/**
- * /sys/bus/iio/devices/.../ddsX_freqY
- */
-
-#define IIO_DEV_ATTR_FREQ(_channel, _num, _mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_freq##_num,			\
-			_mode, _show, _store, _addr)
-
-/**
- * /sys/bus/iio/devices/.../ddsX_freqY_scale
- */
-
-#define IIO_CONST_ATTR_FREQ_SCALE(_channel, _string)			\
-	IIO_CONST_ATTR(dds##_channel##_freq_scale, _string)
-
-/**
- * /sys/bus/iio/devices/.../ddsX_freqsymbol
- */
-
-#define IIO_DEV_ATTR_FREQSYMBOL(_channel, _mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_freqsymbol,			\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_phaseY
- */
-
-#define IIO_DEV_ATTR_PHASE(_channel, _num, _mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_phase##_num,			\
-			_mode, _show, _store, _addr)
-
-/**
- * /sys/bus/iio/devices/.../ddsX_phaseY_scale
- */
-
-#define IIO_CONST_ATTR_PHASE_SCALE(_channel, _string)			\
-	IIO_CONST_ATTR(dds##_channel##_phase_scale, _string)
-
-/**
- * /sys/bus/iio/devices/.../ddsX_phasesymbol
- */
-
-#define IIO_DEV_ATTR_PHASESYMBOL(_channel, _mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_phasesymbol,			\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_pincontrol_en
- */
-
-#define IIO_DEV_ATTR_PINCONTROL_EN(_channel, _mode, _show, _store, _addr)\
-	IIO_DEVICE_ATTR(dds##_channel##_pincontrol_en,			\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_pincontrol_freq_en
- */
-
-#define IIO_DEV_ATTR_PINCONTROL_FREQ_EN(_channel, _mode, _show, _store, _addr)\
-	IIO_DEVICE_ATTR(dds##_channel##_pincontrol_freq_en,		\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_pincontrol_phase_en
- */
-
-#define IIO_DEV_ATTR_PINCONTROL_PHASE_EN(_channel, _mode, _show, _store, _addr)\
-	IIO_DEVICE_ATTR(dds##_channel##_pincontrol_phase_en,		\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_out_enable
- */
-
-#define IIO_DEV_ATTR_OUT_ENABLE(_channel, _mode, _show, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_out_enable,			\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_outY_enable
- */
-
-#define IIO_DEV_ATTR_OUTY_ENABLE(_channel, _output,			\
-			_mode, _show, _store, _addr)			\
-	IIO_DEVICE_ATTR(dds##_channel##_out##_output##_enable,		\
-			_mode, _show, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_outY_wavetype
- */
-
-#define IIO_DEV_ATTR_OUT_WAVETYPE(_channel, _output, _store, _addr)	\
-	IIO_DEVICE_ATTR(dds##_channel##_out##_output##_wavetype,	\
-			S_IWUSR, NULL, _store, _addr);
-
-/**
- * /sys/bus/iio/devices/.../ddsX_outY_wavetype_available
- */
-
-#define IIO_CONST_ATTR_OUT_WAVETYPES_AVAILABLE(_channel, _output, _modes)\
-	IIO_CONST_ATTR(dds##_channel##_out##_output##_wavetype_available,\
-			_modes);
diff --git a/drivers/staging/iio/driver.h b/drivers/staging/iio/driver.h
deleted file mode 100644
index a4f8b2e05af5..000000000000
--- a/drivers/staging/iio/driver.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Industrial I/O in kernel access map interface.
- *
- * Copyright (c) 2011 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef _IIO_INKERN_H_
-#define _IIO_INKERN_H_
-
-struct iio_map;
-
-/**
- * iio_map_array_register() - tell the core about inkernel consumers
- * @indio_dev:	provider device
- * @map:	array of mappings specifying association of channel with client
- */
-int iio_map_array_register(struct iio_dev *indio_dev,
-			   struct iio_map *map);
-
-/**
- * iio_map_array_unregister() - tell the core to remove consumer mappings
- * @indio_dev:	provider device
- * @map:	array of mappings to remove. Note these must have same memory
- *		addresses as those originally added not just equal parameter
- *		values.
- */
-int iio_map_array_unregister(struct iio_dev *indio_dev,
-			     struct iio_map *map);
-
-#endif
diff --git a/drivers/staging/iio/events.h b/drivers/staging/iio/events.h
deleted file mode 100644
index c25f0e3c92e9..000000000000
--- a/drivers/staging/iio/events.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/* The industrial I/O - event passing to userspace
- *
- * Copyright (c) 2008-2011 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef _IIO_EVENTS_H_
-#define _IIO_EVENTS_H_
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include "types.h"
-
-/**
- * struct iio_event_data - The actual event being pushed to userspace
- * @id:		event identifier
- * @timestamp:	best estimate of time of event occurrence (often from
- *		the interrupt handler)
- */
-struct iio_event_data {
-	__u64	id;
-	__s64	timestamp;
-};
-
-#define IIO_GET_EVENT_FD_IOCTL _IOR('i', 0x90, int)
-
-enum iio_event_type {
-	IIO_EV_TYPE_THRESH,
-	IIO_EV_TYPE_MAG,
-	IIO_EV_TYPE_ROC,
-	IIO_EV_TYPE_THRESH_ADAPTIVE,
-	IIO_EV_TYPE_MAG_ADAPTIVE,
-};
-
-enum iio_event_direction {
-	IIO_EV_DIR_EITHER,
-	IIO_EV_DIR_RISING,
-	IIO_EV_DIR_FALLING,
-};
-
-/**
- * IIO_EVENT_CODE() - create event identifier
- * @chan_type:	Type of the channel. Should be one of enum iio_chan_type.
- * @diff:	Whether the event is for an differential channel or not.
- * @modifier:	Modifier for the channel. Should be one of enum iio_modifier.
- * @direction:	Direction of the event. One of enum iio_event_direction.
- * @type:	Type of the event. Should be one enum iio_event_type.
- * @chan:	Channel number for non-differential channels.
- * @chan1:	First channel number for differential channels.
- * @chan2:	Second channel number for differential channels.
- */
-
-#define IIO_EVENT_CODE(chan_type, diff, modifier, direction,		\
-		       type, chan, chan1, chan2)			\
-	(((u64)type << 56) | ((u64)diff << 55) |			\
-	 ((u64)direction << 48) | ((u64)modifier << 40) |		\
-	 ((u64)chan_type << 32) | (((u16)chan2) << 16) | ((u16)chan1) | \
-	 ((u16)chan))
-
-
-#define IIO_EV_DIR_MAX 4
-#define IIO_EV_BIT(type, direction)			\
-	(1 << (type*IIO_EV_DIR_MAX + direction))
-
-/**
- * IIO_MOD_EVENT_CODE() - create event identifier for modified channels
- * @chan_type:	Type of the channel. Should be one of enum iio_chan_type.
- * @number:	Channel number.
- * @modifier:	Modifier for the channel. Should be one of enum iio_modifier.
- * @type:	Type of the event. Should be one enum iio_event_type.
- * @direction:	Direction of the event. One of enum iio_event_direction.
- */
-
-#define IIO_MOD_EVENT_CODE(chan_type, number, modifier,		\
-			   type, direction)				\
-	IIO_EVENT_CODE(chan_type, 0, modifier, direction, type, number, 0, 0)
-
-/**
- * IIO_UNMOD_EVENT_CODE() - create event identifier for unmodified channels
- * @chan_type:	Type of the channel. Should be one of enum iio_chan_type.
- * @number:	Channel number.
- * @type:	Type of the event. Should be one enum iio_event_type.
- * @direction:	Direction of the event. One of enum iio_event_direction.
- */
-
-#define IIO_UNMOD_EVENT_CODE(chan_type, number, type, direction)	\
-	IIO_EVENT_CODE(chan_type, 0, 0, direction, type, number, 0, 0)
-
-#define IIO_EVENT_CODE_EXTRACT_TYPE(mask) ((mask >> 56) & 0xFF)
-
-#define IIO_EVENT_CODE_EXTRACT_DIR(mask) ((mask >> 48) & 0xCF)
-
-#define IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(mask) ((mask >> 32) & 0xFF)
-
-/* Event code number extraction depends on which type of event we have.
- * Perhaps review this function in the future*/
-#define IIO_EVENT_CODE_EXTRACT_CHAN(mask) ((__s16)(mask & 0xFFFF))
-#define IIO_EVENT_CODE_EXTRACT_CHAN2(mask) ((__s16)(((mask) >> 16) & 0xFFFF))
-
-#define IIO_EVENT_CODE_EXTRACT_MODIFIER(mask) ((mask >> 40) & 0xFF)
-#define IIO_EVENT_CODE_EXTRACT_DIFF(mask) (((mask) >> 55) & 0x1)
-
-#endif
diff --git a/drivers/staging/iio/dds/Kconfig b/drivers/staging/iio/frequency/Kconfig
index 93b7141b2c1f..93b7141b2c1f 100644
--- a/drivers/staging/iio/dds/Kconfig
+++ b/drivers/staging/iio/frequency/Kconfig
diff --git a/drivers/staging/iio/dds/Makefile b/drivers/staging/iio/frequency/Makefile
index 147746176b9b..147746176b9b 100644
--- a/drivers/staging/iio/dds/Makefile
+++ b/drivers/staging/iio/frequency/Makefile
diff --git a/drivers/staging/iio/dds/ad5930.c b/drivers/staging/iio/frequency/ad5930.c
index 9c32d1beae25..2d541d0eebef 100644
--- a/drivers/staging/iio/dds/ad5930.c
+++ b/drivers/staging/iio/frequency/ad5930.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad5930"
 
@@ -48,7 +48,7 @@ static ssize_t ad5930_set_parameter(struct device *dev,
 	struct spi_transfer xfer;
 	int ret;
 	struct ad5903_config *config = (struct ad5903_config *)buf;
-	struct iio_dev *idev = dev_get_drvdata(dev);
+	struct iio_dev *idev = dev_to_iio_dev(dev);
 	struct ad5930_state *st = iio_priv(idev);
 
 	config->control = (config->control & ~value_mask);
@@ -97,7 +97,7 @@ static int __devinit ad5930_probe(struct spi_device *spi)
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_allocate_device(sizeof(*st));
+	idev = iio_device_alloc(sizeof(*st));
 	if (idev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -122,7 +122,7 @@ static int __devinit ad5930_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(idev);
+	iio_device_free(idev);
 error_ret:
 	return ret;
 }
@@ -130,7 +130,7 @@ error_ret:
 static int __devexit ad5930_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9832.c b/drivers/staging/iio/frequency/ad9832.c
index 2ccf25dd9289..fed39404e34a 100644
--- a/drivers/staging/iio/dds/ad9832.c
+++ b/drivers/staging/iio/frequency/ad9832.c
@@ -16,8 +16,8 @@
 #include <linux/module.h>
 #include <asm/div64.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dds.h"
 
 #include "ad9832.h"
@@ -77,7 +77,7 @@ static ssize_t ad9832_write(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad9832_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
@@ -177,18 +177,18 @@ static IIO_DEV_ATTR_OUT_ENABLE(0, S_IWUSR, NULL,
 				ad9832_write, AD9832_OUTPUT_EN);
 
 static struct attribute *ad9832_attributes[] = {
-	&iio_dev_attr_dds0_freq0.dev_attr.attr,
-	&iio_dev_attr_dds0_freq1.dev_attr.attr,
-	&iio_const_attr_dds0_freq_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_phase0.dev_attr.attr,
-	&iio_dev_attr_dds0_phase1.dev_attr.attr,
-	&iio_dev_attr_dds0_phase2.dev_attr.attr,
-	&iio_dev_attr_dds0_phase3.dev_attr.attr,
-	&iio_const_attr_dds0_phase_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_pincontrol_en.dev_attr.attr,
-	&iio_dev_attr_dds0_freqsymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_phasesymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_out_enable.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency1.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase2.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase3.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
 	NULL,
 };
 
@@ -221,7 +221,7 @@ static int __devinit ad9832_probe(struct spi_device *spi)
 			goto error_put_reg;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_disable_reg;
@@ -313,7 +313,7 @@ static int __devinit ad9832_probe(struct spi_device *spi)
 	return 0;
 
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_disable_reg:
 	if (!IS_ERR(reg))
 		regulator_disable(reg);
@@ -334,7 +334,7 @@ static int __devexit ad9832_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9832.h b/drivers/staging/iio/frequency/ad9832.h
index c5b701f8aabb..c5b701f8aabb 100644
--- a/drivers/staging/iio/dds/ad9832.h
+++ b/drivers/staging/iio/frequency/ad9832.h
diff --git a/drivers/staging/iio/dds/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 38a2de08626f..1b2dc741d2ce 100644
--- a/drivers/staging/iio/dds/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -19,8 +19,8 @@
 #include <linux/module.h>
 #include <asm/div64.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "dds.h"
 
 #include "ad9834.h"
@@ -66,7 +66,7 @@ static ssize_t ad9834_write(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad9834_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
@@ -145,7 +145,7 @@ static ssize_t ad9834_store_wavetype(struct device *dev,
 				 const char *buf,
 				 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad9834_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret = 0;
@@ -203,7 +203,7 @@ static ssize_t ad9834_show_out0_wavetype_available(struct device *dev,
 						struct device_attribute *attr,
 						char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad9834_state *st = iio_priv(indio_dev);
 	char *str;
 
@@ -218,14 +218,14 @@ static ssize_t ad9834_show_out0_wavetype_available(struct device *dev,
 }
 
 
-static IIO_DEVICE_ATTR(dds0_out0_wavetype_available, S_IRUGO,
+static IIO_DEVICE_ATTR(out_altvoltage0_out0_wavetype_available, S_IRUGO,
 		       ad9834_show_out0_wavetype_available, NULL, 0);
 
 static ssize_t ad9834_show_out1_wavetype_available(struct device *dev,
 						struct device_attribute *attr,
 						char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad9834_state *st = iio_priv(indio_dev);
 	char *str;
 
@@ -237,7 +237,7 @@ static ssize_t ad9834_show_out1_wavetype_available(struct device *dev,
 	return sprintf(buf, "%s\n", str);
 }
 
-static IIO_DEVICE_ATTR(dds0_out1_wavetype_available, S_IRUGO,
+static IIO_DEVICE_ATTR(out_altvoltage0_out1_wavetype_available, S_IRUGO,
 		       ad9834_show_out1_wavetype_available, NULL, 0);
 
 /**
@@ -263,36 +263,36 @@ static IIO_DEV_ATTR_OUT_WAVETYPE(0, 0, ad9834_store_wavetype, 0);
 static IIO_DEV_ATTR_OUT_WAVETYPE(0, 1, ad9834_store_wavetype, 1);
 
 static struct attribute *ad9834_attributes[] = {
-	&iio_dev_attr_dds0_freq0.dev_attr.attr,
-	&iio_dev_attr_dds0_freq1.dev_attr.attr,
-	&iio_const_attr_dds0_freq_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_phase0.dev_attr.attr,
-	&iio_dev_attr_dds0_phase1.dev_attr.attr,
-	&iio_const_attr_dds0_phase_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_pincontrol_en.dev_attr.attr,
-	&iio_dev_attr_dds0_freqsymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_phasesymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_out_enable.dev_attr.attr,
-	&iio_dev_attr_dds0_out1_enable.dev_attr.attr,
-	&iio_dev_attr_dds0_out0_wavetype.dev_attr.attr,
-	&iio_dev_attr_dds0_out1_wavetype.dev_attr.attr,
-	&iio_dev_attr_dds0_out0_wavetype_available.dev_attr.attr,
-	&iio_dev_attr_dds0_out1_wavetype_available.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency1.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_pincontrol_en.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out1_enable.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out0_wavetype.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out1_wavetype.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out0_wavetype_available.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out1_wavetype_available.dev_attr.attr,
 	NULL,
 };
 
 static struct attribute *ad9833_attributes[] = {
-	&iio_dev_attr_dds0_freq0.dev_attr.attr,
-	&iio_dev_attr_dds0_freq1.dev_attr.attr,
-	&iio_const_attr_dds0_freq_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_phase0.dev_attr.attr,
-	&iio_dev_attr_dds0_phase1.dev_attr.attr,
-	&iio_const_attr_dds0_phase_scale.dev_attr.attr,
-	&iio_dev_attr_dds0_freqsymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_phasesymbol.dev_attr.attr,
-	&iio_dev_attr_dds0_out_enable.dev_attr.attr,
-	&iio_dev_attr_dds0_out0_wavetype.dev_attr.attr,
-	&iio_dev_attr_dds0_out0_wavetype_available.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequency1.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_frequency_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase0.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phase1.dev_attr.attr,
+	&iio_const_attr_out_altvoltage0_phase_scale.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_frequencysymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_phasesymbol.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out_enable.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out0_wavetype.dev_attr.attr,
+	&iio_dev_attr_out_altvoltage0_out0_wavetype_available.dev_attr.attr,
 	NULL,
 };
 
@@ -334,7 +334,7 @@ static int __devinit ad9834_probe(struct spi_device *spi)
 			goto error_put_reg;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_disable_reg;
@@ -414,7 +414,7 @@ static int __devinit ad9834_probe(struct spi_device *spi)
 	return 0;
 
 error_free_device:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_disable_reg:
 	if (!IS_ERR(reg))
 		regulator_disable(reg);
@@ -434,7 +434,7 @@ static int __devexit ad9834_remove(struct spi_device *spi)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9834.h b/drivers/staging/iio/frequency/ad9834.h
index ed5ed8d0007f..ed5ed8d0007f 100644
--- a/drivers/staging/iio/dds/ad9834.h
+++ b/drivers/staging/iio/frequency/ad9834.h
diff --git a/drivers/staging/iio/dds/ad9850.c b/drivers/staging/iio/frequency/ad9850.c
index f4f731bb2191..74abee054ac0 100644
--- a/drivers/staging/iio/dds/ad9850.c
+++ b/drivers/staging/iio/frequency/ad9850.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad9850"
 
@@ -43,7 +43,7 @@ static ssize_t ad9850_set_parameter(struct device *dev,
 	struct spi_transfer xfer;
 	int ret;
 	struct ad9850_config *config = (struct ad9850_config *)buf;
-	struct iio_dev *idev = dev_get_drvdata(dev);
+	struct iio_dev *idev = dev_to_iio_dev(dev);
 	struct ad9850_state *st = iio_priv(idev);
 
 	xfer.len = len;
@@ -83,7 +83,7 @@ static int __devinit ad9850_probe(struct spi_device *spi)
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_allocate_device(sizeof(*st));
+	idev = iio_device_alloc(sizeof(*st));
 	if (idev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -108,7 +108,7 @@ static int __devinit ad9850_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(idev);
+	iio_device_free(idev);
 error_ret:
 	return ret;
 }
@@ -116,7 +116,7 @@ error_ret:
 static int __devexit ad9850_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9852.c b/drivers/staging/iio/frequency/ad9852.c
index 554266c615a8..fd9d14a413a5 100644
--- a/drivers/staging/iio/dds/ad9852.c
+++ b/drivers/staging/iio/frequency/ad9852.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad9852"
 
@@ -71,7 +71,7 @@ static ssize_t ad9852_set_parameter(struct device *dev,
 	struct spi_transfer xfer;
 	int ret;
 	struct ad9852_config *config = (struct ad9852_config *)buf;
-	struct iio_dev *idev = dev_get_drvdata(dev);
+	struct iio_dev *idev = dev_to_iio_dev(dev);
 	struct ad9852_state *st = iio_priv(idev);
 
 	xfer.len = 3;
@@ -232,7 +232,7 @@ static int __devinit ad9852_probe(struct spi_device *spi)
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_allocate_device(sizeof(*st));
+	idev = iio_device_alloc(sizeof(*st));
 	if (idev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -258,7 +258,7 @@ static int __devinit ad9852_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(idev);
+	iio_device_free(idev);
 
 error_ret:
 	return ret;
@@ -267,7 +267,7 @@ error_ret:
 static int __devexit ad9852_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9910.c b/drivers/staging/iio/frequency/ad9910.c
index 3985766d6f87..5a7ba305b75a 100644
--- a/drivers/staging/iio/dds/ad9910.c
+++ b/drivers/staging/iio/frequency/ad9910.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad9910"
 
@@ -123,7 +123,7 @@ static ssize_t ad9910_set_parameter(struct device *dev,
 	struct spi_transfer xfer;
 	int ret;
 	struct ad9910_config *config = (struct ad9910_config *)buf;
-	struct iio_dev *idev = dev_get_drvdata(dev);
+	struct iio_dev *idev = dev_to_iio_dev(dev);
 	struct ad9910_state *st = iio_priv(idev);
 
 	xfer.len = 5;
@@ -367,7 +367,7 @@ static int __devinit ad9910_probe(struct spi_device *spi)
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_allocate_device(sizeof(*st));
+	idev = iio_device_alloc(sizeof(*st));
 	if (idev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -392,7 +392,7 @@ static int __devinit ad9910_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(idev);
+	iio_device_free(idev);
 error_ret:
 	return ret;
 }
@@ -400,7 +400,7 @@ error_ret:
 static int __devexit ad9910_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/dds/ad9951.c b/drivers/staging/iio/frequency/ad9951.c
index 4d150048002a..ba6f49ff09ae 100644
--- a/drivers/staging/iio/dds/ad9951.c
+++ b/drivers/staging/iio/frequency/ad9951.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad9951"
 
@@ -64,7 +64,7 @@ static ssize_t ad9951_set_parameter(struct device *dev,
 	struct spi_transfer xfer;
 	int ret;
 	struct ad9951_config *config = (struct ad9951_config *)buf;
-	struct iio_dev *idev = dev_get_drvdata(dev);
+	struct iio_dev *idev = dev_to_iio_dev(dev);
 	struct ad9951_state *st = iio_priv(idev);
 
 	xfer.len = 3;
@@ -176,7 +176,7 @@ static int __devinit ad9951_probe(struct spi_device *spi)
 	struct iio_dev *idev;
 	int ret = 0;
 
-	idev = iio_allocate_device(sizeof(*st));
+	idev = iio_device_alloc(sizeof(*st));
 	if (idev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -202,7 +202,7 @@ static int __devinit ad9951_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(idev);
+	iio_device_free(idev);
 
 error_ret:
 	return ret;
@@ -211,7 +211,7 @@ error_ret:
 static int __devexit ad9951_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/frequency/dds.h b/drivers/staging/iio/frequency/dds.h
new file mode 100644
index 000000000000..c3342f6e052b
--- /dev/null
+++ b/drivers/staging/iio/frequency/dds.h
@@ -0,0 +1,110 @@
+/*
+ * dds.h - sysfs attributes associated with DDS devices
+ *
+ * Copyright (c) 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_frequencyY
+ */
+
+#define IIO_DEV_ATTR_FREQ(_channel, _num, _mode, _show, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_frequency##_num,	\
+			_mode, _show, _store, _addr)
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_frequencyY_scale
+ */
+
+#define IIO_CONST_ATTR_FREQ_SCALE(_channel, _string)			\
+	IIO_CONST_ATTR(out_altvoltage##_channel##_frequency_scale, _string)
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_frequencysymbol
+ */
+
+#define IIO_DEV_ATTR_FREQSYMBOL(_channel, _mode, _show, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_frequencysymbol,	\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_phaseY
+ */
+
+#define IIO_DEV_ATTR_PHASE(_channel, _num, _mode, _show, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_phase##_num,		\
+			_mode, _show, _store, _addr)
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_phaseY_scale
+ */
+
+#define IIO_CONST_ATTR_PHASE_SCALE(_channel, _string)			\
+	IIO_CONST_ATTR(out_altvoltage##_channel##_phase_scale, _string)
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_phasesymbol
+ */
+
+#define IIO_DEV_ATTR_PHASESYMBOL(_channel, _mode, _show, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_phasesymbol,		\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_en
+ */
+
+#define IIO_DEV_ATTR_PINCONTROL_EN(_channel, _mode, _show, _store, _addr)\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_pincontrol_en,	\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_frequency_en
+ */
+
+#define IIO_DEV_ATTR_PINCONTROL_FREQ_EN(_channel, _mode, _show, _store, _addr)\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_pincontrol_frequency_en,\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_phase_en
+ */
+
+#define IIO_DEV_ATTR_PINCONTROL_PHASE_EN(_channel, _mode, _show, _store, _addr)\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_pincontrol_phase_en,	\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_out_enable
+ */
+
+#define IIO_DEV_ATTR_OUT_ENABLE(_channel, _mode, _show, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_out_enable,		\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_outY_enable
+ */
+
+#define IIO_DEV_ATTR_OUTY_ENABLE(_channel, _output,			\
+			_mode, _show, _store, _addr)			\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_out##_output##_enable,\
+			_mode, _show, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype
+ */
+
+#define IIO_DEV_ATTR_OUT_WAVETYPE(_channel, _output, _store, _addr)	\
+	IIO_DEVICE_ATTR(out_altvoltage##_channel##_out##_output##_wavetype,\
+			S_IWUSR, NULL, _store, _addr);
+
+/**
+ * /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype_available
+ */
+
+#define IIO_CONST_ATTR_OUT_WAVETYPES_AVAILABLE(_channel, _output, _modes)\
+	IIO_CONST_ATTR(							\
+	out_altvoltage##_channel##_out##_output##_wavetype_available, _modes);
diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c
index 02cc23420b90..9931e2060e1f 100644
--- a/drivers/staging/iio/gyro/adis16060_core.c
+++ b/drivers/staging/iio/gyro/adis16060_core.c
@@ -15,8 +15,8 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define ADIS16060_GYRO		0x20 /* Measure Angular Rate (Gyro) */
 #define ADIS16060_TEMP_OUT	0x10 /* Measure Temperature */
@@ -85,7 +85,7 @@ static int adis16060_read_raw(struct iio_dev *indio_dev,
 	int ret;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		/* Take the iio_dev status lock */
 		mutex_lock(&indio_dev->mlock);
 		ret = adis16060_spi_write(indio_dev, chan->address);
@@ -120,22 +120,26 @@ static const struct iio_chan_spec adis16060_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16060_GYRO,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16060_AIN1,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16060_AIN2,
 	}, {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = ADIS16060_TEMP_OUT,
 	}
@@ -148,7 +152,7 @@ static int __devinit adis16060_r_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -174,7 +178,7 @@ static int __devinit adis16060_r_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -183,7 +187,7 @@ error_ret:
 static int adis16060_r_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c
index 1815490db8b4..11f1dccd7a0d 100644
--- a/drivers/staging/iio/gyro/adis16080_core.c
+++ b/drivers/staging/iio/gyro/adis16080_core.c
@@ -14,8 +14,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define ADIS16080_DIN_GYRO   (0 << 10) /* Gyroscope output */
 #define ADIS16080_DIN_TEMP   (1 << 10) /* Temperature output */
@@ -87,7 +87,7 @@ static int adis16080_read_raw(struct iio_dev *indio_dev,
 
 	mutex_lock(&indio_dev->mlock);
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		ret = adis16080_spi_write(indio_dev,
 					  chan->address |
 					  ADIS16080_DIN_WRITE);
@@ -110,21 +110,25 @@ static const struct iio_chan_spec adis16080_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16080_DIN_GYRO,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16080_DIN_AIN1,
 	}, {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16080_DIN_AIN2,
 	}, {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16080_DIN_TEMP,
 	}
 };
@@ -141,7 +145,7 @@ static int __devinit adis16080_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -167,7 +171,7 @@ static int __devinit adis16080_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -176,7 +180,7 @@ error_ret:
 static int adis16080_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/gyro/adis16130_core.c b/drivers/staging/iio/gyro/adis16130_core.c
index 947eb86f05d8..bf61cd0b5bbc 100644
--- a/drivers/staging/iio/gyro/adis16130_core.c
+++ b/drivers/staging/iio/gyro/adis16130_core.c
@@ -16,8 +16,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define ADIS16130_CON         0x0
 #define ADIS16130_CON_RD      (1 << 6)
@@ -100,11 +100,13 @@ static const struct iio_chan_spec adis16130_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16130_RATEDATA,
 	}, {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.address = ADIS16130_TEMPDATA,
 	}
 };
@@ -121,7 +123,7 @@ static int __devinit adis16130_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -145,7 +147,7 @@ static int __devinit adis16130_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -155,7 +157,7 @@ error_ret:
 static int adis16130_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c
index 8f6af47e9559..ec765f955f8d 100644
--- a/drivers/staging/iio/gyro/adis16260_core.c
+++ b/drivers/staging/iio/gyro/adis16260_core.c
@@ -18,9 +18,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 
 #include "adis16260.h"
 
@@ -149,7 +149,7 @@ static ssize_t adis16260_read_frequency_available(struct device *dev,
 						  struct device_attribute *attr,
 						  char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct adis16260_state *st = iio_priv(indio_dev);
 	if (spi_get_device_id(st->us)->driver_data)
 		return sprintf(buf, "%s\n", "0.129 ~ 256");
@@ -161,7 +161,7 @@ static ssize_t adis16260_read_frequency(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct adis16260_state *st = iio_priv(indio_dev);
 	int ret, len = 0;
 	u16 t;
@@ -186,7 +186,7 @@ static ssize_t adis16260_write_frequency(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct adis16260_state *st = iio_priv(indio_dev);
 	long val;
 	int ret;
@@ -237,7 +237,7 @@ static ssize_t adis16260_write_reset(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	if (len < 1)
 		return -EINVAL;
 	switch (buf[0]) {
@@ -389,30 +389,76 @@ enum adis16260_channel {
 };
 #define ADIS16260_GYRO_CHANNEL_SET(axis, mod)				\
 	struct iio_chan_spec adis16260_channels_##axis[] = {		\
-		IIO_CHAN(IIO_ANGL_VEL, 1, 0, 0, NULL, 0, mod,		\
-			 IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |	\
-			 IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |	\
-			 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
-			 gyro, ADIS16260_SCAN_GYRO,			\
-			 IIO_ST('s', 14, 16, 0), 0),			\
-		IIO_CHAN(IIO_ANGL, 1, 0, 0, NULL, 0, mod,		\
-			 0,						\
-			 angle, ADIS16260_SCAN_ANGL,			\
-			 IIO_ST('u', 14, 16, 0), 0),			\
-		IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0,			\
-			 IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |		\
-			 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
-			 temp, ADIS16260_SCAN_TEMP,			\
-			 IIO_ST('u', 12, 16, 0), 0),			\
-		IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "supply", 0, 0,		\
-			 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
-			 in_supply, ADIS16260_SCAN_SUPPLY,		\
-			 IIO_ST('u', 12, 16, 0), 0),			\
-		IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, NULL, 1, 0,		\
-			 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
-			 in_aux, ADIS16260_SCAN_AUX_ADC,		\
-			 IIO_ST('u', 12, 16, 0), 0),			\
-		IIO_CHAN_SOFT_TIMESTAMP(5)				\
+		{							\
+			.type = IIO_ANGL_VEL,				\
+			.modified = 1,					\
+			.channel2 = mod,				\
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |		\
+			IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |		\
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
+			.address = gyro,				\
+			.scan_index = ADIS16260_SCAN_GYRO,		\
+			.scan_type = {					\
+				.sign = 's',				\
+				.realbits = 14,				\
+				.storagebits = 16,			\
+			},						\
+		}, {							\
+			.type = IIO_ANGL,				\
+			.modified = 1,					\
+			.channel2 = mod,				\
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
+			.address = angle,				\
+			.scan_index = ADIS16260_SCAN_ANGL,		\
+			.scan_type = {					\
+				.sign = 'u',				\
+				.realbits = 14,				\
+				.storagebits = 16,			\
+			},						\
+		}, {							\
+			.type = IIO_TEMP,				\
+			.indexed = 1,					\
+			.channel = 0,					\
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |		\
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
+			.address = temp,				\
+			.scan_index = ADIS16260_SCAN_TEMP,		\
+			.scan_type = {					\
+				.sign = 'u',				\
+				.realbits = 12,				\
+				.storagebits = 16,			\
+			},						\
+		}, {							\
+			.type = IIO_VOLTAGE,				\
+			.indexed = 1,					\
+			.channel = 0,					\
+			.extend_name = "supply",			\
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
+			.address = in_supply,				\
+			.scan_index = ADIS16260_SCAN_SUPPLY,		\
+			.scan_type = {					\
+				.sign = 'u',				\
+				.realbits = 12,				\
+				.storagebits = 16,			\
+			},						\
+		}, {							\
+			.type = IIO_VOLTAGE,				\
+			.indexed = 1,					\
+			.channel = 1,					\
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |	\
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
+			.address = in_aux,				\
+			.scan_index = ADIS16260_SCAN_AUX_ADC,		\
+			.scan_type = {					\
+				.sign = 'u',				\
+				.realbits = 12,				\
+				.storagebits = 16,			\
+			},						\
+		},							\
+		IIO_CHAN_SOFT_TIMESTAMP(5),				\
 	}
 
 static const ADIS16260_GYRO_CHANNEL_SET(x, IIO_MOD_X);
@@ -440,7 +486,7 @@ static int adis16260_read_raw(struct iio_dev *indio_dev,
 	s16 val16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		addr = adis16260_addresses[chan->address][0];
 		ret = adis16260_spi_read_reg_16(indio_dev, addr, &val16);
@@ -581,7 +627,7 @@ static int __devinit adis16260_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -666,7 +712,7 @@ error_uninitialize_ring:
 error_unreg_ring_funcs:
 	adis16260_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -687,7 +733,7 @@ static int adis16260_remove(struct spi_device *spi)
 	adis16260_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16260_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 err_ret:
 	return ret;
diff --git a/drivers/staging/iio/gyro/adis16260_ring.c b/drivers/staging/iio/gyro/adis16260_ring.c
index 711f15122a08..0fe2d9dfb6cd 100644
--- a/drivers/staging/iio/gyro/adis16260_ring.c
+++ b/drivers/staging/iio/gyro/adis16260_ring.c
@@ -5,20 +5,19 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16260.h"
 
 /**
  * adis16260_read_ring_data() read data registers which will be placed into ring
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @indio_dev: the IIO device
  * @rx: somewhere to pass back the value read
  **/
-static int adis16260_read_ring_data(struct device *dev, u8 *rx)
+static int adis16260_read_ring_data(struct iio_dev *indio_dev, u8 *rx)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct adis16260_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfers[ADIS16260_OUTPUTS + 1];
 	int ret;
@@ -66,22 +65,21 @@ static irqreturn_t adis16260_trigger_handler(int irq, void *p)
 	struct iio_buffer *ring = indio_dev->buffer;
 	int i = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
 
-	data = kmalloc(datasize , GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
 	}
 
 	if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength) &&
-	    adis16260_read_ring_data(&indio_dev->dev, st->rx) >= 0)
+	    adis16260_read_ring_data(indio_dev, st->rx) >= 0)
 		for (; i < bitmap_weight(indio_dev->active_scan_mask,
 					 indio_dev->masklength); i++)
 			data[i] = be16_to_cpup((__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*((s64 *)(data + ((i + 3)/4)*4)) = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)data, pf->timestamp);
diff --git a/drivers/staging/iio/gyro/adis16260_trigger.c b/drivers/staging/iio/gyro/adis16260_trigger.c
index 8299cd18d705..034559e4d5b9 100644
--- a/drivers/staging/iio/gyro/adis16260_trigger.c
+++ b/drivers/staging/iio/gyro/adis16260_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16260.h"
 
 /**
@@ -29,7 +29,7 @@ int adis16260_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16260_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("%s-dev%d",
+	st->trig = iio_trigger_alloc("%s-dev%d",
 					spi_get_device_id(st->us)->name,
 					indio_dev->id);
 	if (st->trig == NULL) {
@@ -60,7 +60,7 @@ int adis16260_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -71,5 +71,5 @@ void adis16260_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/gyro/adxrs450.h b/drivers/staging/iio/gyro/adxrs450.h
index af0c870100b6..f8cf21f02943 100644
--- a/drivers/staging/iio/gyro/adxrs450.h
+++ b/drivers/staging/iio/gyro/adxrs450.h
@@ -49,7 +49,7 @@ enum {
  * @us:			actual spi_device
  * @buf_lock:		mutex to protect tx and rx
  * @tx:			transmit buffer
- * @rx:			recieve buffer
+ * @rx:			receive buffer
  **/
 struct adxrs450_state {
 	struct spi_device	*us;
diff --git a/drivers/staging/iio/gyro/adxrs450_core.c b/drivers/staging/iio/gyro/adxrs450_core.c
index 15e2496f70c8..6513119b1e90 100644
--- a/drivers/staging/iio/gyro/adxrs450_core.c
+++ b/drivers/staging/iio/gyro/adxrs450_core.c
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #include "adxrs450.h"
 
@@ -265,7 +265,7 @@ static int adxrs450_read_raw(struct iio_dev *indio_dev,
 	s16 t;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		switch (chan->type) {
 		case IIO_ANGL_VEL:
 			ret = adxrs450_spi_sensor_data(indio_dev, &t);
@@ -329,14 +329,16 @@ static const struct iio_chan_spec adxrs450_channels[2][2] = {
 			.type = IIO_ANGL_VEL,
 			.modified = 1,
 			.channel2 = IIO_MOD_Z,
-			.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 			IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT |
 			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		}, {
 			.type = IIO_TEMP,
 			.indexed = 1,
 			.channel = 0,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		}
 	},
 	[ID_ADXRS453] = {
@@ -344,13 +346,15 @@ static const struct iio_chan_spec adxrs450_channels[2][2] = {
 			.type = IIO_ANGL_VEL,
 			.modified = 1,
 			.channel2 = IIO_MOD_Z,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
 			IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT,
 		}, {
 			.type = IIO_TEMP,
 			.indexed = 1,
 			.channel = 0,
-			.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		}
 	},
 };
@@ -368,7 +372,7 @@ static int __devinit adxrs450_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -399,7 +403,7 @@ static int __devinit adxrs450_probe(struct spi_device *spi)
 error_initial:
 	iio_device_unregister(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -408,7 +412,7 @@ error_ret:
 static int adxrs450_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/iio.h b/drivers/staging/iio/iio.h
deleted file mode 100644
index b9cd454f69e2..000000000000
--- a/drivers/staging/iio/iio.h
+++ /dev/null
@@ -1,471 +0,0 @@
-
-/* The industrial I/O core
- *
- * Copyright (c) 2008 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef _INDUSTRIAL_IO_H_
-#define _INDUSTRIAL_IO_H_
-
-#include <linux/device.h>
-#include <linux/cdev.h>
-#include "types.h"
-/* IIO TODO LIST */
-/*
- * Provide means of adjusting timer accuracy.
- * Currently assumes nano seconds.
- */
-
-enum iio_data_type {
-	IIO_RAW,
-	IIO_PROCESSED,
-};
-
-/* Could add the raw attributes as well - allowing buffer only devices */
-enum iio_chan_info_enum {
-	/* 0 is reserved for raw attributes */
-	IIO_CHAN_INFO_SCALE = 1,
-	IIO_CHAN_INFO_OFFSET,
-	IIO_CHAN_INFO_CALIBSCALE,
-	IIO_CHAN_INFO_CALIBBIAS,
-	IIO_CHAN_INFO_PEAK,
-	IIO_CHAN_INFO_PEAK_SCALE,
-	IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
-	IIO_CHAN_INFO_AVERAGE_RAW,
-	IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
-};
-
-#define IIO_CHAN_INFO_SHARED_BIT(type) BIT(type*2)
-#define IIO_CHAN_INFO_SEPARATE_BIT(type) BIT(type*2 + 1)
-
-#define IIO_CHAN_INFO_SCALE_SEPARATE_BIT		\
-	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_SCALE)
-#define IIO_CHAN_INFO_SCALE_SHARED_BIT			\
-	IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_SCALE)
-#define IIO_CHAN_INFO_OFFSET_SEPARATE_BIT			\
-	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_OFFSET)
-#define IIO_CHAN_INFO_OFFSET_SHARED_BIT			\
-	IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_OFFSET)
-#define IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT			\
-	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_CALIBSCALE)
-#define IIO_CHAN_INFO_CALIBSCALE_SHARED_BIT			\
-	IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_CALIBSCALE)
-#define IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT			\
-	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_CALIBBIAS)
-#define IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT			\
-	IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_CALIBBIAS)
-#define IIO_CHAN_INFO_PEAK_SEPARATE_BIT			\
-	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_PEAK)
-#define IIO_CHAN_INFO_PEAK_SHARED_BIT			\
-	IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_PEAK)
-#define IIO_CHAN_INFO_PEAKSCALE_SEPARATE_BIT			\
-	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_PEAKSCALE)
-#define IIO_CHAN_INFO_PEAKSCALE_SHARED_BIT			\
-	IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_PEAKSCALE)
-#define IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT	\
-	IIO_CHAN_INFO_SEPARATE_BIT(				\
-		IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW)
-#define IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SHARED_BIT	\
-	IIO_CHAN_INFO_SHARED_BIT(				\
-		IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW)
-#define IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT			\
-	IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_AVERAGE_RAW)
-#define IIO_CHAN_INFO_AVERAGE_RAW_SHARED_BIT			\
-	IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_AVERAGE_RAW)
-#define IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT \
-	IIO_CHAN_INFO_SHARED_BIT(			       \
-		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)
-#define IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT \
-	IIO_CHAN_INFO_SEPARATE_BIT(			       \
-		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)
-
-enum iio_endian {
-	IIO_CPU,
-	IIO_BE,
-	IIO_LE,
-};
-
-struct iio_chan_spec;
-struct iio_dev;
-
-/**
- * struct iio_chan_spec_ext_info - Extended channel info attribute
- * @name:	Info attribute name
- * @shared:	Whether this attribute is shared between all channels.
- * @read:	Read callback for this info attribute, may be NULL.
- * @write:	Write callback for this info attribute, may be NULL.
- */
-struct iio_chan_spec_ext_info {
-	const char *name;
-	bool shared;
-	ssize_t (*read)(struct iio_dev *, struct iio_chan_spec const *,
-			char *buf);
-	ssize_t (*write)(struct iio_dev *, struct iio_chan_spec const *,
-			const char *buf, size_t len);
-};
-
-/**
- * struct iio_chan_spec - specification of a single channel
- * @type:		What type of measurement is the channel making.
- * @channel:		What number or name do we wish to assign the channel.
- * @channel2:		If there is a second number for a differential
- *			channel then this is it. If modified is set then the
- *			value here specifies the modifier.
- * @address:		Driver specific identifier.
- * @scan_index:	Monotonic index to give ordering in scans when read
- *			from a buffer.
- * @scan_type:		Sign:		's' or 'u' to specify signed or unsigned
- *			realbits:	Number of valid bits of data
- *			storage_bits:	Realbits + padding
- *			shift:		Shift right by this before masking out
- *					realbits.
- *			endianness:	little or big endian
- * @info_mask:		What information is to be exported about this channel.
- *			This includes calibbias, scale etc.
- * @event_mask:	What events can this channel produce.
- * @ext_info:		Array of extended info attributes for this channel.
- *			The array is NULL terminated, the last element should
- *			have it's name field set to NULL.
- * @extend_name:	Allows labeling of channel attributes with an
- *			informative name. Note this has no effect codes etc,
- *			unlike modifiers.
- * @datasheet_name:	A name used in in kernel mapping of channels. It should
- *			correspond to the first name that the channel is referred
- *			to by in the datasheet (e.g. IND), or the nearest
- *			possible compound name (e.g. IND-INC).
- * @processed_val:	Flag to specify the data access attribute should be
- *			*_input rather than *_raw.
- * @modified:		Does a modifier apply to this channel. What these are
- *			depends on the channel type.  Modifier is set in
- *			channel2. Examples are IIO_MOD_X for axial sensors about
- *			the 'x' axis.
- * @indexed:		Specify the channel has a numerical index. If not,
- *			the value in channel will be suppressed for attribute
- *			but not for event codes. Typically set it to 0 when
- *			the index is false.
- * @differential:	Channel is differential.
- */
-struct iio_chan_spec {
-	enum iio_chan_type	type;
-	int			channel;
-	int			channel2;
-	unsigned long		address;
-	int			scan_index;
-	struct {
-		char	sign;
-		u8	realbits;
-		u8	storagebits;
-		u8	shift;
-		enum iio_endian endianness;
-	} scan_type;
-	long			info_mask;
-	long			event_mask;
-	const struct iio_chan_spec_ext_info *ext_info;
-	char			*extend_name;
-	const char		*datasheet_name;
-	unsigned		processed_val:1;
-	unsigned		modified:1;
-	unsigned		indexed:1;
-	unsigned		output:1;
-	unsigned		differential:1;
-};
-
-#define IIO_ST(si, rb, sb, sh)						\
-	{ .sign = si, .realbits = rb, .storagebits = sb, .shift = sh }
-
-/* Macro assumes input channels */
-#define IIO_CHAN(_type, _mod, _indexed, _proc, _name, _chan, _chan2, \
-		 _inf_mask, _address, _si, _stype, _event_mask)		\
-	{ .type = _type,						\
-	  .output = 0,							\
-	  .modified = _mod,						\
-	  .indexed = _indexed,						\
-	  .processed_val = _proc,					\
-	  .extend_name = _name,						\
-	  .channel = _chan,						\
-	  .channel2 = _chan2,						\
-	  .info_mask = _inf_mask,					\
-	  .address = _address,						\
-	  .scan_index = _si,						\
-	  .scan_type = _stype,						\
-	  .event_mask = _event_mask }
-
-#define IIO_CHAN_SOFT_TIMESTAMP(_si)					\
-	{ .type = IIO_TIMESTAMP, .channel = -1,				\
-			.scan_index = _si, .scan_type = IIO_ST('s', 64, 64, 0) }
-
-/**
- * iio_get_time_ns() - utility function to get a time stamp for events etc
- **/
-static inline s64 iio_get_time_ns(void)
-{
-	struct timespec ts;
-	/*
-	 * calls getnstimeofday.
-	 * If hrtimers then up to ns accurate, if not microsecond.
-	 */
-	ktime_get_real_ts(&ts);
-
-	return timespec_to_ns(&ts);
-}
-
-/* Device operating modes */
-#define INDIO_DIRECT_MODE		0x01
-#define INDIO_BUFFER_TRIGGERED		0x02
-#define INDIO_BUFFER_HARDWARE		0x08
-
-#define INDIO_ALL_BUFFER_MODES					\
-	(INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE)
-
-struct iio_trigger; /* forward declaration */
-struct iio_dev;
-
-/**
- * struct iio_info - constant information about device
- * @driver_module:	module structure used to ensure correct
- *			ownership of chrdevs etc
- * @event_attrs:	event control attributes
- * @attrs:		general purpose device attributes
- * @read_raw:		function to request a value from the device.
- *			mask specifies which value. Note 0 means a reading of
- *			the channel in question.  Return value will specify the
- *			type of value returned by the device. val and val2 will
- *			contain the elements making up the returned value.
- * @write_raw:		function to write a value to the device.
- *			Parameters are the same as for read_raw.
- * @write_raw_get_fmt:	callback function to query the expected
- *			format/precision. If not set by the driver, write_raw
- *			returns IIO_VAL_INT_PLUS_MICRO.
- * @read_event_config:	find out if the event is enabled.
- * @write_event_config:	set if the event is enabled.
- * @read_event_value:	read a value associated with the event. Meaning
- *			is event dependant. event_code specifies which event.
- * @write_event_value:	write the value associated with the event.
- *			Meaning is event dependent.
- * @validate_trigger:	function to validate the trigger when the
- *			current trigger gets changed.
- **/
-struct iio_info {
-	struct module			*driver_module;
-	struct attribute_group		*event_attrs;
-	const struct attribute_group	*attrs;
-
-	int (*read_raw)(struct iio_dev *indio_dev,
-			struct iio_chan_spec const *chan,
-			int *val,
-			int *val2,
-			long mask);
-
-	int (*write_raw)(struct iio_dev *indio_dev,
-			 struct iio_chan_spec const *chan,
-			 int val,
-			 int val2,
-			 long mask);
-
-	int (*write_raw_get_fmt)(struct iio_dev *indio_dev,
-			 struct iio_chan_spec const *chan,
-			 long mask);
-
-	int (*read_event_config)(struct iio_dev *indio_dev,
-				 u64 event_code);
-
-	int (*write_event_config)(struct iio_dev *indio_dev,
-				  u64 event_code,
-				  int state);
-
-	int (*read_event_value)(struct iio_dev *indio_dev,
-				u64 event_code,
-				int *val);
-	int (*write_event_value)(struct iio_dev *indio_dev,
-				 u64 event_code,
-				 int val);
-	int (*validate_trigger)(struct iio_dev *indio_dev,
-				struct iio_trigger *trig);
-	int (*update_scan_mode)(struct iio_dev *indio_dev,
-				const unsigned long *scan_mask);
-	int (*debugfs_reg_access)(struct iio_dev *indio_dev,
-				  unsigned reg, unsigned writeval,
-				  unsigned *readval);
-};
-
-/**
- * struct iio_buffer_setup_ops - buffer setup related callbacks
- * @preenable:		[DRIVER] function to run prior to marking buffer enabled
- * @postenable:		[DRIVER] function to run after marking buffer enabled
- * @predisable:		[DRIVER] function to run prior to marking buffer
- *			disabled
- * @postdisable:	[DRIVER] function to run after marking buffer disabled
- */
-struct iio_buffer_setup_ops {
-	int				(*preenable)(struct iio_dev *);
-	int				(*postenable)(struct iio_dev *);
-	int				(*predisable)(struct iio_dev *);
-	int				(*postdisable)(struct iio_dev *);
-};
-
-/**
- * struct iio_dev - industrial I/O device
- * @id:			[INTERN] used to identify device internally
- * @modes:		[DRIVER] operating modes supported by device
- * @currentmode:	[DRIVER] current operating mode
- * @dev:		[DRIVER] device structure, should be assigned a parent
- *			and owner
- * @event_interface:	[INTERN] event chrdevs associated with interrupt lines
- * @buffer:		[DRIVER] any buffer present
- * @mlock:		[INTERN] lock used to prevent simultaneous device state
- *			changes
- * @available_scan_masks: [DRIVER] optional array of allowed bitmasks
- * @masklength:		[INTERN] the length of the mask established from
- *			channels
- * @active_scan_mask:	[INTERN] union of all scan masks requested by buffers
- * @trig:		[INTERN] current device trigger (buffer modes)
- * @pollfunc:		[DRIVER] function run on trigger being received
- * @channels:		[DRIVER] channel specification structure table
- * @num_channels:	[DRIVER] number of chanels specified in @channels.
- * @channel_attr_list:	[INTERN] keep track of automatically created channel
- *			attributes
- * @chan_attr_group:	[INTERN] group for all attrs in base directory
- * @name:		[DRIVER] name of the device.
- * @info:		[DRIVER] callbacks and constant info from driver
- * @info_exist_lock:	[INTERN] lock to prevent use during removal
- * @chrdev:		[INTERN] associated character device
- * @groups:		[INTERN] attribute groups
- * @groupcounter:	[INTERN] index of next attribute group
- * @flags:		[INTERN] file ops related flags including busy flag.
- * @debugfs_dentry:	[INTERN] device specific debugfs dentry.
- * @cached_reg_addr:	[INTERN] cached register address for debugfs reads.
- */
-struct iio_dev {
-	int				id;
-
-	int				modes;
-	int				currentmode;
-	struct device			dev;
-
-	struct iio_event_interface	*event_interface;
-
-	struct iio_buffer		*buffer;
-	struct mutex			mlock;
-
-	const unsigned long		*available_scan_masks;
-	unsigned			masklength;
-	const unsigned long		*active_scan_mask;
-	struct iio_trigger		*trig;
-	struct iio_poll_func		*pollfunc;
-
-	struct iio_chan_spec const	*channels;
-	int				num_channels;
-
-	struct list_head		channel_attr_list;
-	struct attribute_group		chan_attr_group;
-	const char			*name;
-	const struct iio_info		*info;
-	struct mutex			info_exist_lock;
-	const struct iio_buffer_setup_ops	*setup_ops;
-	struct cdev			chrdev;
-#define IIO_MAX_GROUPS 6
-	const struct attribute_group	*groups[IIO_MAX_GROUPS + 1];
-	int				groupcounter;
-
-	unsigned long			flags;
-#if defined(CONFIG_DEBUG_FS)
-	struct dentry			*debugfs_dentry;
-	unsigned			cached_reg_addr;
-#endif
-};
-
-/**
- * iio_find_channel_from_si() - get channel from its scan index
- * @indio_dev:		device
- * @si:			scan index to match
- */
-const struct iio_chan_spec
-*iio_find_channel_from_si(struct iio_dev *indio_dev, int si);
-
-/**
- * iio_device_register() - register a device with the IIO subsystem
- * @indio_dev:		Device structure filled by the device driver
- **/
-int iio_device_register(struct iio_dev *indio_dev);
-
-/**
- * iio_device_unregister() - unregister a device from the IIO subsystem
- * @indio_dev:		Device structure representing the device.
- **/
-void iio_device_unregister(struct iio_dev *indio_dev);
-
-/**
- * iio_push_event() - try to add event to the list for userspace reading
- * @indio_dev:		IIO device structure
- * @ev_code:		What event
- * @timestamp:		When the event occurred
- **/
-int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp);
-
-extern struct bus_type iio_bus_type;
-
-/**
- * iio_put_device() - reference counted deallocation of struct device
- * @dev: the iio_device containing the device
- **/
-static inline void iio_put_device(struct iio_dev *indio_dev)
-{
-	if (indio_dev)
-		put_device(&indio_dev->dev);
-};
-
-/* Can we make this smaller? */
-#define IIO_ALIGN L1_CACHE_BYTES
-/**
- * iio_allocate_device() - allocate an iio_dev from a driver
- * @sizeof_priv: Space to allocate for private structure.
- **/
-struct iio_dev *iio_allocate_device(int sizeof_priv);
-
-static inline void *iio_priv(const struct iio_dev *indio_dev)
-{
-	return (char *)indio_dev + ALIGN(sizeof(struct iio_dev), IIO_ALIGN);
-}
-
-static inline struct iio_dev *iio_priv_to_dev(void *priv)
-{
-	return (struct iio_dev *)((char *)priv -
-				  ALIGN(sizeof(struct iio_dev), IIO_ALIGN));
-}
-
-/**
- * iio_free_device() - free an iio_dev from a driver
- * @dev: the iio_dev associated with the device
- **/
-void iio_free_device(struct iio_dev *indio_dev);
-
-/**
- * iio_buffer_enabled() - helper function to test if the buffer is enabled
- * @indio_dev:		IIO device info structure for device
- **/
-static inline bool iio_buffer_enabled(struct iio_dev *indio_dev)
-{
-	return indio_dev->currentmode
-		& (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE);
-};
-
-/**
- * iio_get_debugfs_dentry() - helper function to get the debugfs_dentry
- * @indio_dev:		IIO device info structure for device
- **/
-#if defined(CONFIG_DEBUG_FS)
-static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
-{
-	return indio_dev->debugfs_dentry;
-};
-#else
-static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
-{
-	return NULL;
-};
-#endif
-
-#endif /* _INDUSTRIAL_IO_H_ */
diff --git a/drivers/staging/iio/iio_dummy_evgen.c b/drivers/staging/iio/iio_dummy_evgen.c
index f39f346bf04f..0cd4fe916bf9 100644
--- a/drivers/staging/iio/iio_dummy_evgen.c
+++ b/drivers/staging/iio/iio_dummy_evgen.c
@@ -22,8 +22,8 @@
 #include <linux/sysfs.h>
 
 #include "iio_dummy_evgen.h"
-#include "iio.h"
-#include "sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 /* Fiddly bit of faking and irq without hardware */
 #define IIO_EVENTGEN_NO 10
diff --git a/drivers/staging/iio/iio_hwmon.c b/drivers/staging/iio/iio_hwmon.c
index a603a5f51f93..b03554fee443 100644
--- a/drivers/staging/iio/iio_hwmon.c
+++ b/drivers/staging/iio/iio_hwmon.c
@@ -14,8 +14,8 @@
 #include <linux/platform_device.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
-#include "consumer.h"
-#include "types.h"
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
 
 /**
  * struct iio_hwmon_state - device instance state
diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c
index e3a94572bb40..310411911ed7 100644
--- a/drivers/staging/iio/iio_simple_dummy.c
+++ b/drivers/staging/iio/iio_simple_dummy.c
@@ -19,10 +19,10 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 
-#include "iio.h"
-#include "sysfs.h"
-#include "events.h"
-#include "buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
 #include "iio_simple_dummy.h"
 
 /*
@@ -73,6 +73,12 @@ static struct iio_chan_spec iio_dummy_channels[] = {
 		/* What other information is available? */
 		.info_mask =
 		/*
+		 * in_voltage0_raw
+		 * Raw (unscaled no bias removal etc) measurement
+		 * from the device.
+		 */
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		/*
 		 * in_voltage0_offset
 		 * Offset for userspace to apply prior to scale
 		 * when converting to standard units (microvolts)
@@ -114,6 +120,12 @@ static struct iio_chan_spec iio_dummy_channels[] = {
 		.channel2 = 2,
 		.info_mask =
 		/*
+		 * in_voltage1-voltage2_raw
+		 * Raw (unscaled no bias removal etc) measurement
+		 * from the device.
+		 */
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		/*
 		 * in_voltage-voltage_scale
 		 * Shared version of scale - shared by differential
 		 * input channels of type IIO_VOLTAGE.
@@ -135,6 +147,7 @@ static struct iio_chan_spec iio_dummy_channels[] = {
 		.channel = 3,
 		.channel2 = 4,
 		.info_mask =
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.scan_index = diffvoltage3m4,
 		.scan_type = {
@@ -154,6 +167,7 @@ static struct iio_chan_spec iio_dummy_channels[] = {
 		/* Channel 2 is use for modifiers */
 		.channel2 = IIO_MOD_X,
 		.info_mask =
+		IIO_CHAN_INFO_RAW_SEPARATE_BIT |
 		/*
 		 * Internal bias correction value. Applied
 		 * by the hardware or driver prior to userspace
@@ -177,6 +191,7 @@ static struct iio_chan_spec iio_dummy_channels[] = {
 	/* DAC channel out_voltage0_raw */
 	{
 		.type = IIO_VOLTAGE,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.output = 1,
 		.indexed = 1,
 		.channel = 0,
@@ -203,7 +218,7 @@ static int iio_dummy_read_raw(struct iio_dev *indio_dev,
 
 	mutex_lock(&st->lock);
 	switch (mask) {
-	case 0: /* magic value - channel value read */
+	case IIO_CHAN_INFO_RAW: /* magic value - channel value read */
 		switch (chan->type) {
 		case IIO_VOLTAGE:
 			if (chan->output) {
@@ -290,7 +305,7 @@ static int iio_dummy_write_raw(struct iio_dev *indio_dev,
 	struct iio_dummy_state *st = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		if (chan->output == 0)
 			return -EINVAL;
 
@@ -377,7 +392,7 @@ static int __devinit iio_dummy_probe(int index)
 	 * It also has a region (accessed by iio_priv()
 	 * for chip specific state information.
 	 */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -455,9 +470,7 @@ error_unconfigure_buffer:
 error_unregister_events:
 	iio_simple_dummy_events_unregister(indio_dev);
 error_free_device:
-	/* Note free device should only be called, before registration
-	 * has succeeded. */
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -494,7 +507,7 @@ static int iio_dummy_remove(int index)
 		goto error_ret;
 
 	/* Free all structures */
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
diff --git a/drivers/staging/iio/iio_simple_dummy_buffer.c b/drivers/staging/iio/iio_simple_dummy_buffer.c
index bb4daf744362..fdfc8739095a 100644
--- a/drivers/staging/iio/iio_simple_dummy_buffer.c
+++ b/drivers/staging/iio/iio_simple_dummy_buffer.c
@@ -18,9 +18,9 @@
 #include <linux/irq.h>
 #include <linux/bitmap.h>
 
-#include "iio.h"
-#include "trigger_consumer.h"
-#include "kfifo_buf.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/kfifo_buf.h>
 
 #include "iio_simple_dummy.h"
 
@@ -37,7 +37,7 @@ static const s16 fakedata[] = {
  * @irq: the interrupt number
  * @p: private data - always a pointer to the poll func.
  *
- * This is the guts of buffered capture. On a trigger event occuring,
+ * This is the guts of buffered capture. On a trigger event occurring,
  * if the pollfunc is attached then this handler is called as a threaded
  * interrupt (and hence may sleep). It is responsible for grabbing data
  * from the device and pushing it into the associated buffer.
@@ -48,12 +48,9 @@ static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct iio_buffer *buffer = indio_dev->buffer;
 	int len = 0;
-	/*
-	 * The datasize is obtained from the buffer. It was stored when
-	 * the preenable setup function was called.
-	 */
-	size_t datasize = buffer->access->get_bytes_per_datum(buffer);
-	u16 *data = kmalloc(datasize, GFP_KERNEL);
+	u16 *data;
+
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 
@@ -64,7 +61,7 @@ static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p)
 		 *   up a fast read.  The capture will consist of all of them.
 		 *   Hence we just call the grab data function and fill the
 		 *   buffer without processing.
-		 * sofware scans: can be considered to be random access
+		 * software scans: can be considered to be random access
 		 *   so efficient reading is just a case of minimal bus
 		 *   transactions.
 		 * software culled hardware scans:
@@ -87,7 +84,7 @@ static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p)
 		}
 	}
 	/* Store a timestampe at an 8 byte boundary */
-	if (buffer->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		*(s64 *)(((phys_addr_t)data + len
 				+ sizeof(s64) - 1) & ~(sizeof(s64) - 1))
 			= iio_get_time_ns();
diff --git a/drivers/staging/iio/iio_simple_dummy_events.c b/drivers/staging/iio/iio_simple_dummy_events.c
index 449c7a5ece80..317b77465db4 100644
--- a/drivers/staging/iio/iio_simple_dummy_events.c
+++ b/drivers/staging/iio/iio_simple_dummy_events.c
@@ -12,9 +12,9 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include "iio.h"
-#include "sysfs.h"
-#include "events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 #include "iio_simple_dummy.h"
 
 /* Evgen 'fakes' interrupt events for this example */
@@ -122,7 +122,7 @@ int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
  * @private: pointer to device instance state.
  *
  * This handler is responsible for querying the device to find out what
- * event occured and for then pushing that event towards userspace.
+ * event occurred and for then pushing that event towards userspace.
  * Here only one event occurs so we push that directly on with locally
  * grabbed timestamp.
  */
diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
index cd82b56d58af..a8e51bc04439 100644
--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -19,9 +19,9 @@
 #include <linux/module.h>
 #include <asm/div64.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 #include "../ring_sw.h"
 
 #include "ad5933.h"
@@ -109,15 +109,46 @@ static struct ad5933_platform_data ad5933_default_pdata  = {
 };
 
 static struct iio_chan_spec ad5933_channels[] = {
-	IIO_CHAN(IIO_TEMP, 0, 1, 1, NULL, 0, 0, 0,
-		 0, AD5933_REG_TEMP_DATA, IIO_ST('s', 14, 16, 0), 0),
-	/* Ring Channels */
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "real_raw", 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 AD5933_REG_REAL_DATA, 0, IIO_ST('s', 16, 16, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "imag_raw", 0, 0,
-		 IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
-		 AD5933_REG_IMAG_DATA, 1, IIO_ST('s', 16, 16, 0), 0),
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
+		.address = AD5933_REG_TEMP_DATA,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	}, { /* Ring Channels */
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "real_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = AD5933_REG_REAL_DATA,
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "imag_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.address = AD5933_REG_IMAG_DATA,
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+		},
+	},
 };
 
 static int ad5933_i2c_write(struct i2c_client *client,
@@ -260,7 +291,7 @@ static ssize_t ad5933_show_frequency(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5933_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
@@ -289,7 +320,7 @@ static ssize_t ad5933_store_frequency(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5933_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	long val;
@@ -323,7 +354,7 @@ static ssize_t ad5933_show(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5933_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret = 0, len = 0;
@@ -366,7 +397,7 @@ static ssize_t ad5933_store(struct device *dev,
 					 const char *buf,
 					 size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad5933_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	long val;
@@ -495,7 +526,8 @@ static int ad5933_read_raw(struct iio_dev *indio_dev,
 
 	mutex_lock(&indio_dev->mlock);
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
 		if (iio_buffer_enabled(indio_dev)) {
 			ret = -EBUSY;
 			goto out;
@@ -537,19 +569,14 @@ static const struct iio_info ad5933_info = {
 static int ad5933_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ad5933_state *st = iio_priv(indio_dev);
-	size_t d_size;
 	int ret;
 
 	if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		return -EINVAL;
 
-	d_size = bitmap_weight(indio_dev->active_scan_mask,
-			       indio_dev->masklength) *
-		 ad5933_channels[1].scan_type.storagebits / 8;
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, d_size);
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
 
 	ret = ad5933_reset(st);
 	if (ret < 0)
@@ -678,7 +705,7 @@ static int __devinit ad5933_probe(struct i2c_client *client,
 	int ret, voltage_uv = 0;
 	struct ad5933_platform_data *pdata = client->dev.platform_data;
 	struct ad5933_state *st;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 
@@ -757,7 +784,7 @@ error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -774,7 +801,7 @@ static __devexit int ad5933_remove(struct i2c_client *client)
 		regulator_disable(st->reg);
 		regulator_put(st->reg);
 	}
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c
index e73ad7818d85..1f6bd854e950 100644
--- a/drivers/staging/iio/imu/adis16400_core.c
+++ b/drivers/staging/iio/imu/adis16400_core.c
@@ -26,9 +26,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 #include "adis16400.h"
 
 enum adis16400_chip_variant {
@@ -179,7 +179,7 @@ static ssize_t adis16400_read_frequency(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	int ret, len = 0;
 	ret = adis16400_get_freq(indio_dev);
 	if (ret < 0)
@@ -225,7 +225,7 @@ static ssize_t adis16400_write_frequency(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct adis16400_state *st = iio_priv(indio_dev);
 	long val;
 	int ret;
@@ -279,7 +279,7 @@ static ssize_t adis16400_write_reset(struct device *dev,
 	if (ret < 0)
 		return ret;
 	if (val) {
-		ret = adis16400_reset(dev_get_drvdata(dev));
+		ret = adis16400_reset(dev_to_iio_dev(dev));
 		if (ret < 0)
 			return ret;
 	}
@@ -545,7 +545,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 	s16 val16;
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&indio_dev->mlock);
 		ret = adis16400_spi_read_reg_16(indio_dev,
 				adis16400_addresses[chan->address][0],
@@ -635,7 +635,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.extend_name = "supply",
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in_supply,
 		.scan_index = ADIS16400_SCAN_SUPPLY,
 		.scan_type = IIO_ST('u', 14, 16, 0)
@@ -643,7 +644,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_x,
@@ -653,7 +655,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_y,
@@ -663,7 +666,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_z,
@@ -673,7 +677,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_x,
@@ -683,7 +688,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_y,
@@ -693,7 +699,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_z,
@@ -703,7 +710,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_MAGN,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = magn_x,
 		.scan_index = ADIS16400_SCAN_MAGN_X,
@@ -712,7 +720,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_MAGN,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = magn_y,
 		.scan_index = ADIS16400_SCAN_MAGN_Y,
@@ -721,7 +730,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_MAGN,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = magn_z,
 		.scan_index = ADIS16400_SCAN_MAGN_Z,
@@ -730,7 +740,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = temp,
 		.scan_index = ADIS16400_SCAN_TEMP,
@@ -739,7 +750,8 @@ static struct iio_chan_spec adis16400_channels[] = {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in1,
 		.scan_index = ADIS16400_SCAN_ADC_0,
 		.scan_type = IIO_ST('s', 12, 16, 0),
@@ -753,7 +765,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.extend_name = "supply",
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in_supply,
 		.scan_index = ADIS16400_SCAN_SUPPLY,
 		.scan_type = IIO_ST('u', 12, 16, 0)
@@ -761,7 +774,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_x,
@@ -771,7 +785,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_y,
@@ -781,17 +796,19 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_z,
 		.scan_index = ADIS16400_SCAN_GYRO_Z,
 		.scan_type = IIO_ST('s', 14, 16, 0),
 	}, {
-	.type = IIO_ACCEL,
+		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_x,
@@ -801,7 +818,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_y,
@@ -811,7 +829,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_z,
@@ -822,7 +841,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.extend_name = "x",
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = temp0,
@@ -833,7 +853,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.indexed = 1,
 		.channel = 1,
 		.extend_name = "y",
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = temp1,
@@ -844,7 +865,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.indexed = 1,
 		.channel = 2,
 		.extend_name = "z",
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = temp2,
 		.scan_index = ADIS16350_SCAN_TEMP_Z,
@@ -853,7 +875,8 @@ static struct iio_chan_spec adis16350_channels[] = {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in1,
 		.scan_index = ADIS16350_SCAN_ADC_0,
 		.scan_type = IIO_ST('s', 12, 16, 0),
@@ -867,7 +890,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.indexed = 1,
 		.channel = 0,
 		.extend_name = "supply",
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in_supply,
 		.scan_index = ADIS16400_SCAN_SUPPLY,
 		.scan_type = IIO_ST('u', 12, 16, 0)
@@ -875,7 +899,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_x,
@@ -885,7 +910,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_x,
@@ -895,7 +921,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_y,
@@ -905,7 +932,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_z,
@@ -915,7 +943,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = temp,
 		.scan_index = ADIS16400_SCAN_TEMP,
@@ -924,7 +953,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_VOLTAGE,
 		.indexed = 1,
 		.channel = 1,
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
 		.address = in1,
 		.scan_index = ADIS16350_SCAN_ADC_0,
 		.scan_type = IIO_ST('s', 12, 16, 0),
@@ -932,7 +962,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_INCLI,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.address = incli_x,
 		.scan_index = ADIS16300_SCAN_INCLI_X,
 		.scan_type = IIO_ST('s', 13, 16, 0),
@@ -940,7 +971,8 @@ static struct iio_chan_spec adis16300_channels[] = {
 		.type = IIO_INCLI,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.address = incli_y,
 		.scan_index = ADIS16300_SCAN_INCLI_Y,
 		.scan_type = IIO_ST('s', 13, 16, 0),
@@ -953,7 +985,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_x,
@@ -963,7 +996,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_y,
@@ -973,7 +1007,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ANGL_VEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = gyro_z,
@@ -983,7 +1018,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_X,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_x,
@@ -993,7 +1029,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Y,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_y,
@@ -1003,7 +1040,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_ACCEL,
 		.modified = 1,
 		.channel2 = IIO_MOD_Z,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT |
 		IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT,
 		.address = accel_z,
@@ -1013,7 +1051,8 @@ static const struct iio_chan_spec adis16334_channels[] = {
 		.type = IIO_TEMP,
 		.indexed = 1,
 		.channel = 0,
-		.info_mask = IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
 		IIO_CHAN_INFO_SCALE_SHARED_BIT,
 		.address = accel_z,
 		.scan_index = ADIS16400_SCAN_ACC_Z,
@@ -1122,7 +1161,7 @@ static int __devinit adis16400_probe(struct spi_device *spi)
 {
 	int ret;
 	struct adis16400_state *st;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret =  -ENOMEM;
 		goto error_ret;
@@ -1172,14 +1211,14 @@ static int __devinit adis16400_probe(struct spi_device *spi)
 	return 0;
 
 error_remove_trigger:
-	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
+	if (spi->irq)
 		adis16400_remove_trigger(indio_dev);
 error_uninitialize_ring:
 	iio_buffer_unregister(indio_dev);
 error_unreg_ring_funcs:
 	adis16400_unconfigure_ring(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -1198,7 +1237,7 @@ static int adis16400_remove(struct spi_device *spi)
 	adis16400_remove_trigger(indio_dev);
 	iio_buffer_unregister(indio_dev);
 	adis16400_unconfigure_ring(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 
diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c
index 8daa038b23e6..809e2c4270d1 100644
--- a/drivers/staging/iio/imu/adis16400_ring.c
+++ b/drivers/staging/iio/imu/adis16400_ring.c
@@ -6,20 +6,19 @@
 #include <linux/bitops.h>
 #include <linux/export.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "adis16400.h"
 
 /**
  * adis16400_spi_read_burst() - read all data registers
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @indio_dev: the IIO device
  * @rx: somewhere to pass back the value read (min size is 24 bytes)
  **/
-static int adis16400_spi_read_burst(struct device *dev, u8 *rx)
+static int adis16400_spi_read_burst(struct iio_dev *indio_dev, u8 *rx)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct adis16400_state *st = iio_priv(indio_dev);
 	u32 old_speed_hz = st->us->max_speed_hz;
 	int ret;
@@ -71,9 +70,8 @@ static const u16 read_all_tx_array[] = {
 	cpu_to_be16(ADIS16400_READ_REG(ADIS16400_AUX_ADC)),
 };
 
-static int adis16350_spi_read_all(struct device *dev, u8 *rx)
+static int adis16350_spi_read_all(struct iio_dev *indio_dev, u8 *rx)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct adis16400_state *st = iio_priv(indio_dev);
 
 	struct spi_message msg;
@@ -119,12 +117,12 @@ static irqreturn_t adis16400_trigger_handler(int irq, void *p)
 	struct iio_buffer *ring = indio_dev->buffer;
 	int i = 0, j, ret = 0;
 	s16 *data;
-	size_t datasize = ring->access->get_bytes_per_datum(ring);
+
 	/* Asumption that long is enough for maximum channels */
 	unsigned long mask = *indio_dev->active_scan_mask;
 	int scan_count = bitmap_weight(indio_dev->active_scan_mask,
 				       indio_dev->masklength);
-	data = kmalloc(datasize , GFP_KERNEL);
+	data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
 	if (data == NULL) {
 		dev_err(&st->us->dev, "memory alloc failed in ring bh");
 		return -ENOMEM;
@@ -132,13 +130,13 @@ static irqreturn_t adis16400_trigger_handler(int irq, void *p)
 
 	if (scan_count) {
 		if (st->variant->flags & ADIS16400_NO_BURST) {
-			ret = adis16350_spi_read_all(&indio_dev->dev, st->rx);
+			ret = adis16350_spi_read_all(indio_dev, st->rx);
 			if (ret < 0)
 				goto err;
 			for (; i < scan_count; i++)
 				data[i]	= *(s16 *)(st->rx + i*2);
 		} else {
-			ret = adis16400_spi_read_burst(&indio_dev->dev, st->rx);
+			ret = adis16400_spi_read_burst(indio_dev, st->rx);
 			if (ret < 0)
 				goto err;
 			for (; i < scan_count; i++) {
diff --git a/drivers/staging/iio/imu/adis16400_trigger.c b/drivers/staging/iio/imu/adis16400_trigger.c
index 5bf000757522..42a678e92fc6 100644
--- a/drivers/staging/iio/imu/adis16400_trigger.c
+++ b/drivers/staging/iio/imu/adis16400_trigger.c
@@ -3,8 +3,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "adis16400.h"
 
 /**
@@ -29,7 +29,7 @@ int adis16400_probe_trigger(struct iio_dev *indio_dev)
 	int ret;
 	struct adis16400_state *st = iio_priv(indio_dev);
 
-	st->trig = iio_allocate_trigger("%s-dev%d",
+	st->trig = iio_trigger_alloc("%s-dev%d",
 					indio_dev->name,
 					indio_dev->id);
 	if (st->trig == NULL) {
@@ -59,7 +59,7 @@ int adis16400_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -70,5 +70,5 @@ void adis16400_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/kfifo_buf.h b/drivers/staging/iio/kfifo_buf.h
deleted file mode 100644
index 9f7da016af04..000000000000
--- a/drivers/staging/iio/kfifo_buf.h
+++ /dev/null
@@ -1,8 +0,0 @@
-
-#include <linux/kfifo.h>
-#include "iio.h"
-#include "buffer.h"
-
-struct iio_buffer *iio_kfifo_allocate(struct iio_dev *indio_dev);
-void iio_kfifo_free(struct iio_buffer *r);
-
diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index e7e9159d9895..4bed30eac3ed 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -4,15 +4,26 @@
 menu "Light sensors"
 
 config SENSORS_ISL29018
-        tristate "ISL 29018 light and proximity sensor"
-        depends on I2C
-        default n
-        help
-         If you say yes here you get support for ambient light sensing and
-         proximity infrared sensing from Intersil ISL29018.
-         This driver will provide the measurements of ambient light intensity
-         in lux, proximity infrared sensing and normal infrared sensing.
-         Data from sensor is accessible via sysfs.
+	tristate "ISL 29018 light and proximity sensor"
+	depends on I2C
+	select REGMAP_I2C
+	default n
+	help
+	 If you say yes here you get support for ambient light sensing and
+	 proximity infrared sensing from Intersil ISL29018.
+	 This driver will provide the measurements of ambient light intensity
+	 in lux, proximity infrared sensing and normal infrared sensing.
+	 Data from sensor is accessible via sysfs.
+
+config SENSORS_ISL29028
+	tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	 Provides driver for the Intersil's ISL29028 device.
+	 This driver supports the sysfs interface to get the ALS, IR intensity,
+	 Proximity value via iio. The ISL29028 provides the concurrent sensing
+	 of ambient light and proximity.
 
 config SENSORS_TSL2563
 	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
@@ -31,4 +42,12 @@ config TSL2583
 	 Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
 	 Access ALS data via iio, sysfs.
 
+config TSL2x7x
+	tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
+	depends on I2C
+	help
+	 Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
+	 tmd2672, tsl2772, tmd2772 devices.
+	 Provides iio_events and direct access via sysfs.
+
 endmenu
diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
index 3011fbfa8dc2..141af1eb164c 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -4,4 +4,6 @@
 
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_SENSORS_ISL29018)	+= isl29018.o
+obj-$(CONFIG_SENSORS_ISL29028)	+= isl29028.o
 obj-$(CONFIG_TSL2583)	+= tsl2583.o
+obj-$(CONFIG_TSL2x7x)	+= tsl2x7x_core.o
diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
index 38ec52b65dfa..0abbf18d6103 100644
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -26,9 +26,11 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
 #define CONVERSION_TIME_MS		100
 
 #define ISL29018_REG_ADD_COMMAND1	0x00
@@ -51,49 +53,22 @@
 
 #define ISL29018_REG_ADD_DATA_LSB	0x02
 #define ISL29018_REG_ADD_DATA_MSB	0x03
-#define ISL29018_MAX_REGS		(ISL29018_REG_ADD_DATA_MSB+1)
 
 #define ISL29018_REG_TEST		0x08
 #define ISL29018_TEST_SHIFT		0
 #define ISL29018_TEST_MASK		(0xFF << ISL29018_TEST_SHIFT)
 
 struct isl29018_chip {
-	struct i2c_client	*client;
+	struct device		*dev;
+	struct regmap		*regmap;
 	struct mutex		lock;
 	unsigned int		lux_scale;
 	unsigned int		range;
 	unsigned int		adc_bit;
 	int			prox_scheme;
-	u8			reg_cache[ISL29018_MAX_REGS];
 };
 
-static int isl29018_write_data(struct i2c_client *client, u8 reg,
-			u8 val, u8 mask, u8 shift)
-{
-	u8 regval = val;
-	int ret;
-	struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
-
-	/* don't cache or mask REG_TEST */
-	if (reg < ISL29018_MAX_REGS) {
-		regval = chip->reg_cache[reg];
-		regval &= ~mask;
-		regval |= val << shift;
-	}
-
-	ret = i2c_smbus_write_byte_data(client, reg, regval);
-	if (ret) {
-		dev_err(&client->dev, "Write to device fails status %x\n", ret);
-	} else {
-		/* don't update cache on err */
-		if (reg < ISL29018_MAX_REGS)
-			chip->reg_cache[reg] = regval;
-	}
-
-	return ret;
-}
-
-static int isl29018_set_range(struct i2c_client *client, unsigned long range,
+static int isl29018_set_range(struct isl29018_chip *chip, unsigned long range,
 		unsigned int *new_range)
 {
 	static const unsigned long supp_ranges[] = {1000, 4000, 16000, 64000};
@@ -109,11 +84,11 @@ static int isl29018_set_range(struct i2c_client *client, unsigned long range,
 	if (i >= ARRAY_SIZE(supp_ranges))
 		return -EINVAL;
 
-	return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
-			i, COMMANDII_RANGE_MASK, COMMANDII_RANGE_SHIFT);
+	return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+			COMMANDII_RANGE_MASK, i << COMMANDII_RANGE_SHIFT);
 }
 
-static int isl29018_set_resolution(struct i2c_client *client,
+static int isl29018_set_resolution(struct isl29018_chip *chip,
 			unsigned long adcbit, unsigned int *conf_adc_bit)
 {
 	static const unsigned long supp_adcbit[] = {16, 12, 8, 4};
@@ -129,48 +104,49 @@ static int isl29018_set_resolution(struct i2c_client *client,
 	if (i >= ARRAY_SIZE(supp_adcbit))
 		return -EINVAL;
 
-	return isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
-			i, COMMANDII_RESOLUTION_MASK,
-			COMMANDII_RESOLUTION_SHIFT);
+	return regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+			COMMANDII_RESOLUTION_MASK,
+			i << COMMANDII_RESOLUTION_SHIFT);
 }
 
-static int isl29018_read_sensor_input(struct i2c_client *client, int mode)
+static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode)
 {
 	int status;
-	int lsb;
-	int msb;
+	unsigned int lsb;
+	unsigned int msb;
 
 	/* Set mode */
-	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1,
-			mode, COMMMAND1_OPMODE_MASK, COMMMAND1_OPMODE_SHIFT);
+	status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1,
+			mode << COMMMAND1_OPMODE_SHIFT);
 	if (status) {
-		dev_err(&client->dev, "Error in setting operating mode\n");
+		dev_err(chip->dev,
+			"Error in setting operating mode err %d\n", status);
 		return status;
 	}
 	msleep(CONVERSION_TIME_MS);
-	lsb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_LSB);
-	if (lsb < 0) {
-		dev_err(&client->dev, "Error in reading LSB DATA\n");
-		return lsb;
+	status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_LSB, &lsb);
+	if (status < 0) {
+		dev_err(chip->dev,
+			"Error in reading LSB DATA with err %d\n", status);
+		return status;
 	}
 
-	msb = i2c_smbus_read_byte_data(client, ISL29018_REG_ADD_DATA_MSB);
-	if (msb < 0) {
-		dev_err(&client->dev, "Error in reading MSB DATA\n");
-		return msb;
+	status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_MSB, &msb);
+	if (status < 0) {
+		dev_err(chip->dev,
+			"Error in reading MSB DATA with error %d\n", status);
+		return status;
 	}
-	dev_vdbg(&client->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb);
+	dev_vdbg(chip->dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb);
 
 	return (msb << 8) | lsb;
 }
 
-static int isl29018_read_lux(struct i2c_client *client, int *lux)
+static int isl29018_read_lux(struct isl29018_chip *chip, int *lux)
 {
 	int lux_data;
-	struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
 
-	lux_data = isl29018_read_sensor_input(client,
-				COMMMAND1_OPMODE_ALS_ONCE);
+	lux_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_ALS_ONCE);
 
 	if (lux_data < 0)
 		return lux_data;
@@ -180,11 +156,11 @@ static int isl29018_read_lux(struct i2c_client *client, int *lux)
 	return 0;
 }
 
-static int isl29018_read_ir(struct i2c_client *client, int *ir)
+static int isl29018_read_ir(struct isl29018_chip *chip, int *ir)
 {
 	int ir_data;
 
-	ir_data = isl29018_read_sensor_input(client, COMMMAND1_OPMODE_IR_ONCE);
+	ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE);
 
 	if (ir_data < 0)
 		return ir_data;
@@ -194,7 +170,7 @@ static int isl29018_read_ir(struct i2c_client *client, int *ir)
 	return 0;
 }
 
-static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
+static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme,
 		int *near_ir)
 {
 	int status;
@@ -202,14 +178,15 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
 	int ir_data = -1;
 
 	/* Do proximity sensing with required scheme */
-	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMANDII,
-			scheme, COMMANDII_SCHEME_MASK, COMMANDII_SCHEME_SHIFT);
+	status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
+			COMMANDII_SCHEME_MASK,
+			scheme << COMMANDII_SCHEME_SHIFT);
 	if (status) {
-		dev_err(&client->dev, "Error in setting operating mode\n");
+		dev_err(chip->dev, "Error in setting operating mode\n");
 		return status;
 	}
 
-	prox_data = isl29018_read_sensor_input(client,
+	prox_data = isl29018_read_sensor_input(chip,
 					COMMMAND1_OPMODE_PROX_ONCE);
 	if (prox_data < 0)
 		return prox_data;
@@ -219,8 +196,7 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
 		return 0;
 	}
 
-	ir_data = isl29018_read_sensor_input(client,
-				COMMMAND1_OPMODE_IR_ONCE);
+	ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE);
 
 	if (ir_data < 0)
 		return ir_data;
@@ -238,7 +214,7 @@ static int isl29018_read_proximity_ir(struct i2c_client *client, int scheme,
 static ssize_t show_range(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
 
 	return sprintf(buf, "%u\n", chip->range);
@@ -247,9 +223,8 @@ static ssize_t show_range(struct device *dev,
 static ssize_t store_range(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
-	struct i2c_client *client = chip->client;
 	int status;
 	unsigned long lval;
 	unsigned int new_range;
@@ -264,10 +239,11 @@ static ssize_t store_range(struct device *dev,
 	}
 
 	mutex_lock(&chip->lock);
-	status = isl29018_set_range(client, lval, &new_range);
+	status = isl29018_set_range(chip, lval, &new_range);
 	if (status < 0) {
 		mutex_unlock(&chip->lock);
-		dev_err(dev, "Error in setting max range\n");
+		dev_err(dev,
+			"Error in setting max range with err %d\n", status);
 		return status;
 	}
 	chip->range = new_range;
@@ -280,7 +256,7 @@ static ssize_t store_range(struct device *dev,
 static ssize_t show_resolution(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
 
 	return sprintf(buf, "%u\n", chip->adc_bit);
@@ -289,9 +265,8 @@ static ssize_t show_resolution(struct device *dev,
 static ssize_t store_resolution(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
-	struct i2c_client *client = chip->client;
 	int status;
 	unsigned long lval;
 	unsigned int new_adc_bit;
@@ -304,7 +279,7 @@ static ssize_t store_resolution(struct device *dev,
 	}
 
 	mutex_lock(&chip->lock);
-	status = isl29018_set_resolution(client, lval, &new_adc_bit);
+	status = isl29018_set_resolution(chip, lval, &new_adc_bit);
 	if (status < 0) {
 		mutex_unlock(&chip->lock);
 		dev_err(dev, "Error in setting resolution\n");
@@ -320,7 +295,7 @@ static ssize_t store_resolution(struct device *dev,
 static ssize_t show_prox_infrared_supression(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
 
 	/* return the "proximity scheme" i.e. if the chip does on chip
@@ -331,7 +306,7 @@ static ssize_t show_prox_infrared_supression(struct device *dev,
 static ssize_t store_prox_infrared_supression(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct isl29018_chip *chip = iio_priv(indio_dev);
 	unsigned long lval;
 
@@ -379,20 +354,20 @@ static int isl29018_read_raw(struct iio_dev *indio_dev,
 {
 	int ret = -EINVAL;
 	struct isl29018_chip *chip = iio_priv(indio_dev);
-	struct i2c_client *client = chip->client;
 
 	mutex_lock(&chip->lock);
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
 		case IIO_LIGHT:
-			ret = isl29018_read_lux(client, val);
+			ret = isl29018_read_lux(chip, val);
 			break;
 		case IIO_INTENSITY:
-			ret = isl29018_read_ir(client, val);
+			ret = isl29018_read_ir(chip, val);
 			break;
 		case IIO_PROXIMITY:
-			ret = isl29018_read_proximity_ir(client,
+			ret = isl29018_read_proximity_ir(chip,
 					chip->prox_scheme, val);
 			break;
 		default:
@@ -419,15 +394,17 @@ static const struct iio_chan_spec isl29018_channels[] = {
 		.type = IIO_LIGHT,
 		.indexed = 1,
 		.channel = 0,
-		.processed_val = IIO_PROCESSED,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
 	}, {
 		.type = IIO_INTENSITY,
 		.modified = 1,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 		.channel2 = IIO_MOD_LIGHT_IR,
 	}, {
 		/* Unindexed in current ABI.  But perhaps it should be. */
 		.type = IIO_PROXIMITY,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 	}
 };
 
@@ -456,15 +433,12 @@ static const struct attribute_group isl29108_group = {
 	.attrs = isl29018_attributes,
 };
 
-static int isl29018_chip_init(struct i2c_client *client)
+static int isl29018_chip_init(struct isl29018_chip *chip)
 {
-	struct isl29018_chip *chip = iio_priv(i2c_get_clientdata(client));
 	int status;
 	int new_adc_bit;
 	unsigned int new_range;
 
-	memset(chip->reg_cache, 0, sizeof(chip->reg_cache));
-
 	/* Code added per Intersil Application Note 1534:
 	 *     When VDD sinks to approximately 1.8V or below, some of
 	 * the part's registers may change their state. When VDD
@@ -485,10 +459,9 @@ static int isl29018_chip_init(struct i2c_client *client)
 	 * the same thing EXCEPT the data sheet asks for a 1ms delay after
 	 * writing the CMD1 register.
 	 */
-	status = isl29018_write_data(client, ISL29018_REG_TEST, 0,
-				ISL29018_TEST_MASK, ISL29018_TEST_SHIFT);
+	status = regmap_write(chip->regmap, ISL29018_REG_TEST, 0x0);
 	if (status < 0) {
-		dev_err(&client->dev, "Failed to clear isl29018 TEST reg."
+		dev_err(chip->dev, "Failed to clear isl29018 TEST reg."
 					"(%d)\n", status);
 		return status;
 	}
@@ -497,10 +470,9 @@ static int isl29018_chip_init(struct i2c_client *client)
 	 * "Operating Mode" (COMMAND1) register is reprogrammed when
 	 * data is read from the device.
 	 */
-	status = isl29018_write_data(client, ISL29018_REG_ADD_COMMAND1, 0,
-				0xff, 0);
+	status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, 0);
 	if (status < 0) {
-		dev_err(&client->dev, "Failed to clear isl29018 CMD1 reg."
+		dev_err(chip->dev, "Failed to clear isl29018 CMD1 reg."
 					"(%d)\n", status);
 		return status;
 	}
@@ -508,13 +480,13 @@ static int isl29018_chip_init(struct i2c_client *client)
 	msleep(1);	/* per data sheet, page 10 */
 
 	/* set defaults */
-	status = isl29018_set_range(client, chip->range, &new_range);
+	status = isl29018_set_range(chip, chip->range, &new_range);
 	if (status < 0) {
-		dev_err(&client->dev, "Init of isl29018 fails\n");
+		dev_err(chip->dev, "Init of isl29018 fails\n");
 		return status;
 	}
 
-	status = isl29018_set_resolution(client, chip->adc_bit,
+	status = isl29018_set_resolution(chip, chip->adc_bit,
 						&new_adc_bit);
 
 	return 0;
@@ -527,6 +499,32 @@ static const struct iio_info isl29108_info = {
 	.write_raw = &isl29018_write_raw,
 };
 
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ISL29018_REG_ADD_DATA_LSB:
+	case ISL29018_REG_ADD_DATA_MSB:
+	case ISL29018_REG_ADD_COMMAND1:
+	case ISL29018_REG_TEST:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/*
+ * isl29018_regmap_config: regmap configuration.
+ * Use RBTREE mechanism for caching.
+ */
+static const struct regmap_config isl29018_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = is_volatile_reg,
+	.max_register = ISL29018_REG_TEST,
+	.num_reg_defaults_raw = ISL29018_REG_TEST + 1,
+	.cache_type = REGCACHE_RBTREE,
+};
+
 static int __devinit isl29018_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -534,7 +532,7 @@ static int __devinit isl29018_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	int err;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		dev_err(&client->dev, "iio allocation fails\n");
 		err = -ENOMEM;
@@ -543,7 +541,7 @@ static int __devinit isl29018_probe(struct i2c_client *client,
 	chip = iio_priv(indio_dev);
 
 	i2c_set_clientdata(client, indio_dev);
-	chip->client = client;
+	chip->dev = &client->dev;
 
 	mutex_init(&chip->lock);
 
@@ -551,7 +549,14 @@ static int __devinit isl29018_probe(struct i2c_client *client,
 	chip->range = 1000;
 	chip->adc_bit = 16;
 
-	err = isl29018_chip_init(client);
+	chip->regmap = devm_regmap_init_i2c(client, &isl29018_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		err = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "regmap initialization failed: %d\n", err);
+		goto exit;
+	}
+
+	err = isl29018_chip_init(chip);
 	if (err)
 		goto exit_iio_free;
 
@@ -569,7 +574,7 @@ static int __devinit isl29018_probe(struct i2c_client *client,
 
 	return 0;
 exit_iio_free:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 exit:
 	return err;
 }
@@ -580,7 +585,7 @@ static int __devexit isl29018_remove(struct i2c_client *client)
 
 	dev_dbg(&client->dev, "%s()\n", __func__);
 	iio_device_unregister(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
@@ -593,7 +598,7 @@ static const struct i2c_device_id isl29018_id[] = {
 MODULE_DEVICE_TABLE(i2c, isl29018_id);
 
 static const struct of_device_id isl29018_of_match[] = {
-	{ .compatible = "invn,isl29018", },
+	{ .compatible = "isil,isl29018", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, isl29018_of_match);
diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
new file mode 100644
index 000000000000..33a4c3f94a14
--- /dev/null
+++ b/drivers/staging/iio/light/isl29028.c
@@ -0,0 +1,566 @@
+/*
+ * IIO driver for the light sensor ISL29028.
+ * ISL29028 is Concurrent Ambient Light and Proximity Sensor
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define CONVERSION_TIME_MS		100
+
+#define ISL29028_REG_CONFIGURE		0x01
+
+#define CONFIGURE_ALS_IR_MODE_ALS	0
+#define CONFIGURE_ALS_IR_MODE_IR	BIT(0)
+#define CONFIGURE_ALS_IR_MODE_MASK	BIT(0)
+
+#define CONFIGURE_ALS_RANGE_LOW_LUX	0
+#define CONFIGURE_ALS_RANGE_HIGH_LUX	BIT(1)
+#define CONFIGURE_ALS_RANGE_MASK	BIT(1)
+
+#define CONFIGURE_ALS_DIS		0
+#define CONFIGURE_ALS_EN		BIT(2)
+#define CONFIGURE_ALS_EN_MASK		BIT(2)
+
+#define CONFIGURE_PROX_DRIVE		BIT(3)
+
+#define CONFIGURE_PROX_SLP_SH		4
+#define CONFIGURE_PROX_SLP_MASK		(7 << CONFIGURE_PROX_SLP_SH)
+
+#define CONFIGURE_PROX_EN		BIT(7)
+#define CONFIGURE_PROX_EN_MASK		BIT(7)
+
+#define ISL29028_REG_INTERRUPT		0x02
+
+#define ISL29028_REG_PROX_DATA		0x08
+#define ISL29028_REG_ALSIR_L		0x09
+#define ISL29028_REG_ALSIR_U		0x0A
+
+#define ISL29028_REG_TEST1_MODE		0x0E
+#define ISL29028_REG_TEST2_MODE		0x0F
+
+#define ISL29028_NUM_REGS		(ISL29028_REG_TEST2_MODE + 1)
+
+enum als_ir_mode {
+	MODE_NONE = 0,
+	MODE_ALS,
+	MODE_IR
+};
+
+struct isl29028_chip {
+	struct device		*dev;
+	struct mutex		lock;
+	struct regmap		*regmap;
+
+	unsigned int		prox_sampling;
+	bool			enable_prox;
+
+	int			lux_scale;
+	int			als_ir_mode;
+};
+
+static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
+			unsigned int sampling)
+{
+	static unsigned int prox_period[] = {800, 400, 200, 100, 75, 50, 12, 0};
+	int sel;
+	unsigned int period = DIV_ROUND_UP(1000, sampling);
+
+	for (sel = 0; sel < ARRAY_SIZE(prox_period); ++sel) {
+		if (period >= prox_period[sel])
+			break;
+	}
+	return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_PROX_SLP_MASK, sel << CONFIGURE_PROX_SLP_SH);
+}
+
+static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable)
+{
+	int ret;
+	int val = 0;
+
+	if (enable)
+		val = CONFIGURE_PROX_EN;
+	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_PROX_EN_MASK, val);
+	if (ret < 0)
+		return ret;
+
+	/* Wait for conversion to be complete for first sample */
+	mdelay(DIV_ROUND_UP(1000, chip->prox_sampling));
+	return 0;
+}
+
+static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale)
+{
+	int val = (lux_scale == 2000) ? CONFIGURE_ALS_RANGE_HIGH_LUX :
+					CONFIGURE_ALS_RANGE_LOW_LUX;
+
+	return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+		CONFIGURE_ALS_RANGE_MASK, val);
+}
+
+static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
+	enum als_ir_mode mode)
+{
+	int ret = 0;
+
+	switch (mode) {
+	case MODE_ALS:
+		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_ALS);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_ALS_RANGE_MASK, CONFIGURE_ALS_RANGE_HIGH_LUX);
+		break;
+
+	case MODE_IR:
+		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_ALS_IR_MODE_MASK, CONFIGURE_ALS_IR_MODE_IR);
+		break;
+
+	case MODE_NONE:
+		return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_DIS);
+	}
+
+	if (ret < 0)
+		return ret;
+
+	/* Enable the ALS/IR */
+	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
+			CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_EN);
+	if (ret < 0)
+		return ret;
+
+	/* Need to wait for conversion time if ALS/IR mode enabled */
+	mdelay(CONVERSION_TIME_MS);
+	return 0;
+}
+
+static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
+{
+	unsigned int lsb;
+	unsigned int msb;
+	int ret;
+
+	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L, &lsb);
+	if (ret < 0) {
+		dev_err(chip->dev,
+			"Error in reading register ALSIR_L err %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U, &msb);
+	if (ret < 0) {
+		dev_err(chip->dev,
+			"Error in reading register ALSIR_U err %d\n", ret);
+		return ret;
+	}
+
+	*als_ir = ((msb & 0xF) << 8) | (lsb & 0xFF);
+	return 0;
+}
+
+static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox)
+{
+	unsigned int data;
+	int ret;
+
+	ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error in reading register %d, error %d\n",
+				ISL29028_REG_PROX_DATA, ret);
+		return ret;
+	}
+	*prox = data;
+	return 0;
+}
+
+static int isl29028_proxim_get(struct isl29028_chip *chip, int *prox_data)
+{
+	int ret;
+
+	if (!chip->enable_prox) {
+		ret = isl29028_enable_proximity(chip, true);
+		if (ret < 0)
+			return ret;
+		chip->enable_prox = true;
+	}
+	return isl29028_read_proxim(chip, prox_data);
+}
+
+static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
+{
+	int ret;
+	int als_ir_data;
+
+	if (chip->als_ir_mode != MODE_ALS) {
+		ret = isl29028_set_als_ir_mode(chip, MODE_ALS);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Error in enabling ALS mode err %d\n", ret);
+			return ret;
+		}
+		chip->als_ir_mode = MODE_ALS;
+	}
+
+	ret = isl29028_read_als_ir(chip, &als_ir_data);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * convert als data count to lux.
+	 * if lux_scale = 125,  lux = count * 0.031
+	 * if lux_scale = 2000, lux = count * 0.49
+	 */
+	if (chip->lux_scale == 125)
+		als_ir_data = (als_ir_data * 31) / 1000;
+	else
+		als_ir_data = (als_ir_data * 49) / 100;
+
+	*als_data = als_ir_data;
+	return 0;
+}
+
+static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
+{
+	int ret;
+
+	if (chip->als_ir_mode != MODE_IR) {
+		ret = isl29028_set_als_ir_mode(chip, MODE_IR);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Error in enabling IR mode err %d\n", ret);
+			return ret;
+		}
+		chip->als_ir_mode = MODE_IR;
+	}
+	return isl29028_read_als_ir(chip, ir_data);
+}
+
+/* Channel IO */
+static int isl29028_write_raw(struct iio_dev *indio_dev,
+	     struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+	struct isl29028_chip *chip = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	mutex_lock(&chip->lock);
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		if (mask != IIO_CHAN_INFO_SAMP_FREQ) {
+			dev_err(chip->dev,
+				"proximity: mask value 0x%08lx not supported\n",
+				mask);
+			break;
+		}
+		if (val < 1 || val > 100) {
+			dev_err(chip->dev,
+				"Samp_freq %d is not in range[1:100]\n", val);
+			break;
+		}
+		ret = isl29028_set_proxim_sampling(chip, val);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Setting proximity samp_freq fail, err %d\n",
+				ret);
+			break;
+		}
+		chip->prox_sampling = val;
+		break;
+
+	case IIO_LIGHT:
+		if (mask != IIO_CHAN_INFO_SCALE) {
+			dev_err(chip->dev,
+				"light: mask value 0x%08lx not supported\n",
+				mask);
+			break;
+		}
+		if ((val != 125) && (val != 2000)) {
+			dev_err(chip->dev,
+				"lux scale %d is invalid [125, 2000]\n", val);
+			break;
+		}
+		ret = isl29028_set_als_scale(chip, val);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Setting lux scale fail with error %d\n", ret);
+			break;
+		}
+		chip->lux_scale = val;
+		break;
+
+	default:
+		dev_err(chip->dev, "Unsupported channel type\n");
+		break;
+	}
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static int isl29028_read_raw(struct iio_dev *indio_dev,
+	     struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
+	struct isl29028_chip *chip = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	mutex_lock(&chip->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = isl29028_als_get(chip, val);
+			break;
+		case IIO_INTENSITY:
+			ret = isl29028_ir_get(chip, val);
+			break;
+		case IIO_PROXIMITY:
+			ret = isl29028_proxim_get(chip, val);
+			break;
+		default:
+			break;
+		}
+		if (ret < 0)
+			break;
+		ret = IIO_VAL_INT;
+		break;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_PROXIMITY)
+			break;
+		*val = chip->prox_sampling;
+		ret = IIO_VAL_INT;
+		break;
+
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type != IIO_LIGHT)
+			break;
+		*val = chip->lux_scale;
+		ret = IIO_VAL_INT;
+		break;
+
+	default:
+		dev_err(chip->dev, "mask value 0x%08lx not supported\n", mask);
+		break;
+	}
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static IIO_CONST_ATTR(in_proximity_sampling_frequency_available,
+				"1, 3, 5, 10, 13, 20, 83, 100");
+static IIO_CONST_ATTR(in_illuminance_scale_available, "125, 2000");
+
+#define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
+#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
+static struct attribute *isl29028_attributes[] = {
+	ISL29028_CONST_ATTR(in_proximity_sampling_frequency_available),
+	ISL29028_CONST_ATTR(in_illuminance_scale_available),
+	NULL,
+};
+
+static const struct attribute_group isl29108_group = {
+	.attrs = isl29028_attributes,
+};
+
+static const struct iio_chan_spec isl29028_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT |
+		IIO_CHAN_INFO_SCALE_SEPARATE_BIT,
+	}, {
+		.type = IIO_INTENSITY,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+	}, {
+		.type = IIO_PROXIMITY,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT,
+	}
+};
+
+static const struct iio_info isl29028_info = {
+	.attrs = &isl29108_group,
+	.driver_module = THIS_MODULE,
+	.read_raw = &isl29028_read_raw,
+	.write_raw = &isl29028_write_raw,
+};
+
+static int isl29028_chip_init(struct isl29028_chip *chip)
+{
+	int ret;
+
+	chip->enable_prox  = false;
+	chip->prox_sampling = 20;
+	chip->lux_scale = 2000;
+	chip->als_ir_mode = MODE_NONE;
+
+	ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+			__func__, ISL29028_REG_TEST1_MODE, ret);
+		return ret;
+	}
+	ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+			__func__, ISL29028_REG_TEST2_MODE, ret);
+		return ret;
+	}
+
+	ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s(): write to reg %d failed, err = %d\n",
+			__func__, ISL29028_REG_CONFIGURE, ret);
+		return ret;
+	}
+
+	ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s(): setting the proximity, err = %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = isl29028_set_als_scale(chip, chip->lux_scale);
+	if (ret < 0)
+		dev_err(chip->dev, "%s(): setting als scale failed, err = %d\n",
+			__func__, ret);
+	return ret;
+}
+
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ISL29028_REG_INTERRUPT:
+	case ISL29028_REG_PROX_DATA:
+	case ISL29028_REG_ALSIR_L:
+	case ISL29028_REG_ALSIR_U:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config isl29028_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_reg = is_volatile_reg,
+	.max_register = ISL29028_NUM_REGS - 1,
+	.num_reg_defaults_raw = ISL29028_NUM_REGS,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int __devinit isl29028_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct isl29028_chip *chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = iio_device_alloc(sizeof(*chip));
+	if (!indio_dev) {
+		dev_err(&client->dev, "iio allocation fails\n");
+		return -ENOMEM;
+	}
+
+	chip = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	chip->dev = &client->dev;
+	mutex_init(&chip->lock);
+
+	chip->regmap = devm_regmap_init_i2c(client, &isl29028_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		ret = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "regmap initialization failed: %d\n", ret);
+		goto exit_iio_free;
+	}
+
+	ret = isl29028_chip_init(chip);
+	if (ret < 0) {
+		dev_err(chip->dev, "chip initialization failed: %d\n", ret);
+		goto exit_iio_free;
+	}
+
+	indio_dev->info = &isl29028_info;
+	indio_dev->channels = isl29028_channels;
+	indio_dev->num_channels = ARRAY_SIZE(isl29028_channels);
+	indio_dev->name = id->name;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(chip->dev, "iio registration fails with error %d\n",
+			ret);
+		goto exit_iio_free;
+	}
+	return 0;
+
+exit_iio_free:
+	iio_device_free(indio_dev);
+	return ret;
+}
+
+static int __devexit isl29028_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	iio_device_free(indio_dev);
+	return 0;
+}
+
+static const struct i2c_device_id isl29028_id[] = {
+	{"isl29028", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, isl29028_id);
+
+static const struct of_device_id isl29028_of_match[] = {
+	{ .compatible = "isil,isl29028", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, isl29028_of_match);
+
+static struct i2c_driver isl29028_driver = {
+	.class	= I2C_CLASS_HWMON,
+	.driver  = {
+		.name = "isl29028",
+		.owner = THIS_MODULE,
+		.of_match_table = isl29028_of_match,
+	},
+	.probe	 = isl29028_probe,
+	.remove  = __devexit_p(isl29028_remove),
+	.id_table = isl29028_id,
+};
+
+module_i2c_driver(isl29028_driver);
+
+MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
index 546c95a4ea9e..9d740be43a82 100644
--- a/drivers/staging/iio/light/tsl2563.c
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -35,9 +35,9 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../events.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
 #include "tsl2563.h"
 
 /* Use this many bits for fraction part. */
@@ -465,7 +465,7 @@ static int tsl2563_write_raw(struct iio_dev *indio_dev,
 {
 	struct tsl2563_chip *chip = iio_priv(indio_dev);
 
-	if (chan->channel == 0)
+	if (chan->channel == IIO_MOD_LIGHT_BOTH)
 		chip->calib0 = calib_from_sysfs(val);
 	else
 		chip->calib1 = calib_from_sysfs(val);
@@ -485,7 +485,8 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
 
 	mutex_lock(&chip->lock);
 	switch (m) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
 		case IIO_LIGHT:
 			ret = tsl2563_get_adc(chip);
@@ -534,12 +535,14 @@ static const struct iio_chan_spec tsl2563_channels[] = {
 	{
 		.type = IIO_LIGHT,
 		.indexed = 1,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
 		.channel = 0,
 	}, {
 		.type = IIO_INTENSITY,
 		.modified = 1,
 		.channel2 = IIO_MOD_LIGHT_BOTH,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
 		.event_mask = (IIO_EV_BIT(IIO_EV_TYPE_THRESH,
 					  IIO_EV_DIR_RISING) |
 			       IIO_EV_BIT(IIO_EV_TYPE_THRESH,
@@ -548,7 +551,8 @@ static const struct iio_chan_spec tsl2563_channels[] = {
 		.type = IIO_INTENSITY,
 		.modified = 1,
 		.channel2 = IIO_MOD_LIGHT_IR,
-		.info_mask = IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
 	}
 };
 
@@ -710,7 +714,7 @@ static int __devinit tsl2563_probe(struct i2c_client *client,
 	int err = 0;
 	u8 id = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (!indio_dev)
 		return -ENOMEM;
 
@@ -797,7 +801,7 @@ fail2:
 	if (client->irq)
 		free_irq(client->irq, indio_dev);
 fail1:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 	return err;
 }
 
@@ -818,7 +822,7 @@ static int tsl2563_remove(struct i2c_client *client)
 	if (client->irq)
 		free_irq(client->irq, indio_dev);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
index 8671d98e0448..5e23ad5a30d5 100644
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -28,7 +28,7 @@
 #include <linux/unistd.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include "../iio.h"
+#include <linux/iio/iio.h>
 
 #define TSL258X_MAX_DEVICE_REGS		32
 
@@ -483,7 +483,7 @@ static int taos_chip_off(struct iio_dev *indio_dev)
 static ssize_t taos_power_state_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", chip->taos_chip_status);
@@ -492,7 +492,7 @@ static ssize_t taos_power_state_show(struct device *dev,
 static ssize_t taos_power_state_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	unsigned long value;
 
 	if (strict_strtoul(buf, 0, &value))
@@ -509,7 +509,7 @@ static ssize_t taos_power_state_store(struct device *dev,
 static ssize_t taos_gain_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 	char gain[4] = {0};
 
@@ -534,7 +534,7 @@ static ssize_t taos_gain_show(struct device *dev,
 static ssize_t taos_gain_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 	unsigned long value;
 
@@ -571,7 +571,7 @@ static ssize_t taos_gain_available_show(struct device *dev,
 static ssize_t taos_als_time_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", chip->taos_settings.als_time);
@@ -580,7 +580,7 @@ static ssize_t taos_als_time_show(struct device *dev,
 static ssize_t taos_als_time_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 	unsigned long value;
 
@@ -608,7 +608,7 @@ static ssize_t taos_als_time_available_show(struct device *dev,
 static ssize_t taos_als_trim_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", chip->taos_settings.als_gain_trim);
@@ -617,7 +617,7 @@ static ssize_t taos_als_trim_show(struct device *dev,
 static ssize_t taos_als_trim_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 	unsigned long value;
 
@@ -633,7 +633,7 @@ static ssize_t taos_als_trim_store(struct device *dev,
 static ssize_t taos_als_cal_target_show(struct device *dev,
 	struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 
 	return sprintf(buf, "%d\n", chip->taos_settings.als_cal_target);
@@ -642,7 +642,7 @@ static ssize_t taos_als_cal_target_show(struct device *dev,
 static ssize_t taos_als_cal_target_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 	unsigned long value;
 
@@ -660,7 +660,7 @@ static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr,
 {
 	int ret;
 
-	ret = taos_get_lux(dev_get_drvdata(dev));
+	ret = taos_get_lux(dev_to_iio_dev(dev));
 	if (ret < 0)
 		return ret;
 
@@ -670,7 +670,7 @@ static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr,
 static ssize_t taos_do_calibrate(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	unsigned long value;
 
 	if (strict_strtoul(buf, 0, &value))
@@ -708,7 +708,7 @@ static ssize_t taos_luxtable_show(struct device *dev,
 static ssize_t taos_luxtable_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 	int value[ARRAY_SIZE(taos_device_lux)*3 + 1];
 	int n;
@@ -815,7 +815,7 @@ static int __devinit taos_probe(struct i2c_client *clientp,
 		return -EOPNOTSUPP;
 	}
 
-	indio_dev = iio_allocate_device(sizeof(*chip));
+	indio_dev = iio_device_alloc(sizeof(*chip));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		dev_err(&clientp->dev, "iio allocation failed\n");
@@ -879,7 +879,7 @@ static int __devinit taos_probe(struct i2c_client *clientp,
 	dev_info(&clientp->dev, "Light sensor found.\n");
 	return 0;
 fail1:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 fail2:
 	return ret;
 }
@@ -926,7 +926,7 @@ static SIMPLE_DEV_PM_OPS(taos_pm_ops, taos_suspend, taos_resume);
 static int __devexit taos_remove(struct i2c_client *client)
 {
 	iio_device_unregister(i2c_get_clientdata(client));
-	iio_free_device(i2c_get_clientdata(client));
+	iio_device_free(i2c_get_clientdata(client));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/light/tsl2x7x.h b/drivers/staging/iio/light/tsl2x7x.h
new file mode 100755
index 000000000000..c4acf5ff1794
--- /dev/null
+++ b/drivers/staging/iio/light/tsl2x7x.h
@@ -0,0 +1,100 @@
+/*
+ * Device driver for monitoring ambient light intensity (lux)
+ * and proximity (prox) within the TAOS TSL2X7X family of devices.
+ *
+ * Copyright (c) 2012, TAOS Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
+ */
+
+#ifndef __TSL2X7X_H
+#define __TSL2X7X_H
+#include <linux/pm.h>
+
+/* Max number of segments allowable in LUX table */
+#define TSL2X7X_MAX_LUX_TABLE_SIZE		9
+#define MAX_DEFAULT_TABLE_BYTES (sizeof(int) * TSL2X7X_MAX_LUX_TABLE_SIZE)
+
+struct iio_dev;
+
+struct tsl2x7x_lux {
+	unsigned int ratio;
+	unsigned int ch0;
+	unsigned int ch1;
+};
+
+/**
+ * struct tsl2x7x_default_settings - power on defaults unless
+ *                                   overridden by platform data.
+ *  @als_time:              ALS Integration time - multiple of 50mS
+ *  @als_gain:              Index into the ALS gain table.
+ *  @als_gain_trim:         default gain trim to account for
+ *                          aperture effects.
+ *  @wait_time:             Time between PRX and ALS cycles
+ *                          in 2.7 periods
+ *  @prx_time:              5.2ms prox integration time -
+ *                          decrease in 2.7ms periods
+ *  @prx_gain:              Proximity gain index
+ *  @prox_config:           Prox configuration filters.
+ *  @als_cal_target:        Known external ALS reading for
+ *                          calibration.
+ *  @interrupts_en:         Enable/Disable - 0x00 = none, 0x10 = als,
+ *                                           0x20 = prx,  0x30 = bth
+ *  @persistence:           H/W Filters, Number of 'out of limits'
+ *                          ADC readings PRX/ALS.
+ *  @als_thresh_low:        CH0 'low' count to trigger interrupt.
+ *  @als_thresh_high:       CH0 'high' count to trigger interrupt.
+ *  @prox_thres_low:        Low threshold proximity detection.
+ *  @prox_thres_high:       High threshold proximity detection
+ *  @prox_pulse_count:      Number if proximity emitter pulses
+ *  @prox_max_samples_cal:  Used for prox cal.
+ */
+struct tsl2x7x_settings {
+	int als_time;
+	int als_gain;
+	int als_gain_trim;
+	int wait_time;
+	int prx_time;
+	int prox_gain;
+	int prox_config;
+	int als_cal_target;
+	u8  interrupts_en;
+	u8  persistence;
+	int als_thresh_low;
+	int als_thresh_high;
+	int prox_thres_low;
+	int prox_thres_high;
+	int prox_pulse_count;
+	int prox_max_samples_cal;
+};
+
+/**
+ * struct tsl2X7X_platform_data - Platform callback, glass and defaults
+ * @platform_power:            Suspend/resume platform callback
+ * @power_on:                  Power on callback
+ * @power_off:                 Power off callback
+ * @platform_lux_table:        Device specific glass coefficents
+ * @platform_default_settings: Device specific power on defaults
+ *
+ */
+struct tsl2X7X_platform_data {
+	int (*platform_power)(struct device *dev, pm_message_t);
+	int (*power_on)      (struct iio_dev *indio_dev);
+	int (*power_off)     (struct i2c_client *dev);
+	struct tsl2x7x_lux platform_lux_table[TSL2X7X_MAX_LUX_TABLE_SIZE];
+	struct tsl2x7x_settings *platform_default_settings;
+};
+
+#endif /* __TSL2X7X_H */
diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c
new file mode 100755
index 000000000000..c3b05a1b3ea8
--- /dev/null
+++ b/drivers/staging/iio/light/tsl2x7x_core.c
@@ -0,0 +1,2082 @@
+/*
+ * Device driver for monitoring ambient light intensity in (lux)
+ * and proximity detection (prox) within the TAOS TSL2X7X family of devices.
+ *
+ * Copyright (c) 2012, TAOS Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA        02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include "tsl2x7x.h"
+
+/* Cal defs*/
+#define PROX_STAT_CAL        0
+#define PROX_STAT_SAMP       1
+#define MAX_SAMPLES_CAL      200
+
+/* TSL2X7X Device ID */
+#define TRITON_ID    0x00
+#define SWORDFISH_ID 0x30
+#define HALIBUT_ID   0x20
+
+/* Lux calculation constants */
+#define TSL2X7X_LUX_CALC_OVER_FLOW     65535
+
+/* TAOS Register definitions - note:
+ * depending on device, some of these register are not used and the
+ * register address is benign.
+ */
+/* 2X7X register offsets */
+#define TSL2X7X_MAX_CONFIG_REG         16
+
+/* Device Registers and Masks */
+#define TSL2X7X_CNTRL                  0x00
+#define TSL2X7X_ALS_TIME               0X01
+#define TSL2X7X_PRX_TIME               0x02
+#define TSL2X7X_WAIT_TIME              0x03
+#define TSL2X7X_ALS_MINTHRESHLO        0X04
+#define TSL2X7X_ALS_MINTHRESHHI        0X05
+#define TSL2X7X_ALS_MAXTHRESHLO        0X06
+#define TSL2X7X_ALS_MAXTHRESHHI        0X07
+#define TSL2X7X_PRX_MINTHRESHLO        0X08
+#define TSL2X7X_PRX_MINTHRESHHI        0X09
+#define TSL2X7X_PRX_MAXTHRESHLO        0X0A
+#define TSL2X7X_PRX_MAXTHRESHHI        0X0B
+#define TSL2X7X_PERSISTENCE            0x0C
+#define TSL2X7X_PRX_CONFIG             0x0D
+#define TSL2X7X_PRX_COUNT              0x0E
+#define TSL2X7X_GAIN                   0x0F
+#define TSL2X7X_NOTUSED                0x10
+#define TSL2X7X_REVID                  0x11
+#define TSL2X7X_CHIPID                 0x12
+#define TSL2X7X_STATUS                 0x13
+#define TSL2X7X_ALS_CHAN0LO            0x14
+#define TSL2X7X_ALS_CHAN0HI            0x15
+#define TSL2X7X_ALS_CHAN1LO            0x16
+#define TSL2X7X_ALS_CHAN1HI            0x17
+#define TSL2X7X_PRX_LO                 0x18
+#define TSL2X7X_PRX_HI                 0x19
+
+/* tsl2X7X cmd reg masks */
+#define TSL2X7X_CMD_REG                0x80
+#define TSL2X7X_CMD_SPL_FN             0x60
+
+#define TSL2X7X_CMD_PROX_INT_CLR       0X05
+#define TSL2X7X_CMD_ALS_INT_CLR        0x06
+#define TSL2X7X_CMD_PROXALS_INT_CLR    0X07
+
+/* tsl2X7X cntrl reg masks */
+#define TSL2X7X_CNTL_ADC_ENBL          0x02
+#define TSL2X7X_CNTL_PWR_ON            0x01
+
+/* tsl2X7X status reg masks */
+#define TSL2X7X_STA_ADC_VALID          0x01
+#define TSL2X7X_STA_PRX_VALID          0x02
+#define TSL2X7X_STA_ADC_PRX_VALID      (TSL2X7X_STA_ADC_VALID |\
+					TSL2X7X_STA_PRX_VALID)
+#define TSL2X7X_STA_ALS_INTR           0x10
+#define TSL2X7X_STA_PRX_INTR           0x20
+
+/* tsl2X7X cntrl reg masks */
+#define TSL2X7X_CNTL_REG_CLEAR         0x00
+#define TSL2X7X_CNTL_PROX_INT_ENBL     0X20
+#define TSL2X7X_CNTL_ALS_INT_ENBL      0X10
+#define TSL2X7X_CNTL_WAIT_TMR_ENBL     0X08
+#define TSL2X7X_CNTL_PROX_DET_ENBL     0X04
+#define TSL2X7X_CNTL_PWRON             0x01
+#define TSL2X7X_CNTL_ALSPON_ENBL       0x03
+#define TSL2X7X_CNTL_INTALSPON_ENBL    0x13
+#define TSL2X7X_CNTL_PROXPON_ENBL      0x0F
+#define TSL2X7X_CNTL_INTPROXPON_ENBL   0x2F
+
+/*Prox diode to use */
+#define TSL2X7X_DIODE0                 0x10
+#define TSL2X7X_DIODE1                 0x20
+#define TSL2X7X_DIODE_BOTH             0x30
+
+/* LED Power */
+#define TSL2X7X_mA100                  0x00
+#define TSL2X7X_mA50                   0x40
+#define TSL2X7X_mA25                   0x80
+#define TSL2X7X_mA13                   0xD0
+#define TSL2X7X_MAX_TIMER_CNT          (0xFF)
+
+/*Common device IIO EventMask */
+#define TSL2X7X_EVENT_MASK \
+		(IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \
+		IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING)),
+
+#define TSL2X7X_MIN_ITIME 3
+
+/* TAOS txx2x7x Device family members */
+enum {
+	tsl2571,
+	tsl2671,
+	tmd2671,
+	tsl2771,
+	tmd2771,
+	tsl2572,
+	tsl2672,
+	tmd2672,
+	tsl2772,
+	tmd2772
+};
+
+enum {
+	TSL2X7X_CHIP_UNKNOWN = 0,
+	TSL2X7X_CHIP_WORKING = 1,
+	TSL2X7X_CHIP_SUSPENDED = 2
+};
+
+struct tsl2x7x_parse_result {
+	int integer;
+	int fract;
+};
+
+/* Per-device data */
+struct tsl2x7x_als_info {
+	u16 als_ch0;
+	u16 als_ch1;
+	u16 lux;
+};
+
+struct tsl2x7x_prox_stat {
+	int min;
+	int max;
+	int mean;
+	unsigned long stddev;
+};
+
+struct tsl2x7x_chip_info {
+	int chan_table_elements;
+	struct iio_chan_spec		channel[4];
+	const struct iio_info		*info;
+};
+
+struct tsl2X7X_chip {
+	kernel_ulong_t id;
+	struct mutex prox_mutex;
+	struct mutex als_mutex;
+	struct i2c_client *client;
+	u16 prox_data;
+	struct tsl2x7x_als_info als_cur_info;
+	struct tsl2x7x_settings tsl2x7x_settings;
+	struct tsl2X7X_platform_data *pdata;
+	int als_time_scale;
+	int als_saturation;
+	int tsl2x7x_chip_status;
+	u8 tsl2x7x_config[TSL2X7X_MAX_CONFIG_REG];
+	const struct tsl2x7x_chip_info	*chip_info;
+	const struct iio_info *info;
+	s64 event_timestamp;
+	/* This structure is intentionally large to accommodate
+	 * updates via sysfs. */
+	/* Sized to 9 = max 8 segments + 1 termination segment */
+	struct tsl2x7x_lux tsl2x7x_device_lux[TSL2X7X_MAX_LUX_TABLE_SIZE];
+};
+
+/* Different devices require different coefficents */
+static const struct tsl2x7x_lux tsl2x71_lux_table[] = {
+	{ 14461,   611,   1211 },
+	{ 18540,   352,    623 },
+	{     0,     0,      0 },
+};
+
+static const struct tsl2x7x_lux tmd2x71_lux_table[] = {
+	{ 11635,   115,    256 },
+	{ 15536,    87,    179 },
+	{     0,     0,      0 },
+};
+
+static const struct tsl2x7x_lux tsl2x72_lux_table[] = {
+	{ 14013,   466,   917 },
+	{ 18222,   310,   552 },
+	{     0,     0,     0 },
+};
+
+static const struct tsl2x7x_lux tmd2x72_lux_table[] = {
+	{ 13218,   130,   262 },
+	{ 17592,   92,    169 },
+	{     0,     0,     0 },
+};
+
+static const struct tsl2x7x_lux *tsl2x7x_default_lux_table_group[] = {
+	[tsl2571] =	tsl2x71_lux_table,
+	[tsl2671] =	tsl2x71_lux_table,
+	[tmd2671] =	tmd2x71_lux_table,
+	[tsl2771] =	tsl2x71_lux_table,
+	[tmd2771] =	tmd2x71_lux_table,
+	[tsl2572] =	tsl2x72_lux_table,
+	[tsl2672] =	tsl2x72_lux_table,
+	[tmd2672] =	tmd2x72_lux_table,
+	[tsl2772] =	tsl2x72_lux_table,
+	[tmd2772] =	tmd2x72_lux_table,
+};
+
+static const struct tsl2x7x_settings tsl2x7x_default_settings = {
+	.als_time = 219, /* 101 ms */
+	.als_gain = 0,
+	.prx_time = 254, /* 5.4 ms */
+	.prox_gain = 1,
+	.wait_time = 245,
+	.prox_config = 0,
+	.als_gain_trim = 1000,
+	.als_cal_target = 150,
+	.als_thresh_low = 200,
+	.als_thresh_high = 256,
+	.persistence = 255,
+	.interrupts_en = 0,
+	.prox_thres_low  = 0,
+	.prox_thres_high = 512,
+	.prox_max_samples_cal = 30,
+	.prox_pulse_count = 8
+};
+
+static const s16 tsl2X7X_als_gainadj[] = {
+	1,
+	8,
+	16,
+	120
+};
+
+static const s16 tsl2X7X_prx_gainadj[] = {
+	1,
+	2,
+	4,
+	8
+};
+
+/* Channel variations */
+enum {
+	ALS,
+	PRX,
+	ALSPRX,
+	PRX2,
+	ALSPRX2,
+};
+
+static const u8 device_channel_config[] = {
+	ALS,
+	PRX,
+	PRX,
+	ALSPRX,
+	ALSPRX,
+	ALS,
+	PRX2,
+	PRX2,
+	ALSPRX2,
+	ALSPRX2
+};
+
+/**
+ * tsl2x7x_parse_buffer() - parse a decimal result from a buffer.
+ * @*buf:                   pointer to char buffer to parse
+ * @*result:                pointer to buffer to contain
+ *                          resulting interger / decimal as ints.
+ *
+ */
+static int
+tsl2x7x_parse_buffer(const char *buf, struct tsl2x7x_parse_result *result)
+{
+	int integer = 0, fract = 0, fract_mult = 100000;
+	bool integer_part = true, negative = false;
+
+	if (buf[0] == '-') {
+		negative = true;
+		buf++;
+	}
+
+	while (*buf) {
+		if ('0' <= *buf && *buf <= '9') {
+			if (integer_part)
+				integer = integer*10 + *buf - '0';
+			else {
+				fract += fract_mult*(*buf - '0');
+				if (fract_mult == 1)
+					break;
+				fract_mult /= 10;
+			}
+		} else if (*buf == '\n') {
+			if (*(buf + 1) == '\0')
+				break;
+			else
+				return -EINVAL;
+		} else if (*buf == '.') {
+			integer_part = false;
+		} else {
+			return -EINVAL;
+		}
+		buf++;
+	}
+	if (negative) {
+		if (integer)
+			integer = -integer;
+		else
+			fract = -fract;
+	}
+
+	result->integer = integer;
+	result->fract = fract;
+
+	return 0;
+}
+
+/**
+ * tsl2x7x_i2c_read() - Read a byte from a register.
+ * @client:	i2c client
+ * @reg:	device register to read from
+ * @*val:	pointer to location to store register contents.
+ *
+ */
+static int
+tsl2x7x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
+{
+	int ret = 0;
+
+	/* select register to write */
+	ret = i2c_smbus_write_byte(client, (TSL2X7X_CMD_REG | reg));
+	if (ret < 0) {
+		dev_err(&client->dev, "%s: failed to write register %x\n"
+				, __func__, reg);
+		return ret;
+	}
+
+	/* read the data */
+	ret = i2c_smbus_read_byte(client);
+	if (ret >= 0)
+		*val = (u8)ret;
+	else
+		dev_err(&client->dev, "%s: failed to read register %x\n"
+						, __func__, reg);
+
+	return ret;
+}
+
+/**
+ * tsl2x7x_get_lux() - Reads and calculates current lux value.
+ * @indio_dev:	pointer to IIO device
+ *
+ * The raw ch0 and ch1 values of the ambient light sensed in the last
+ * integration cycle are read from the device.
+ * Time scale factor array values are adjusted based on the integration time.
+ * The raw values are multiplied by a scale factor, and device gain is obtained
+ * using gain index. Limit checks are done next, then the ratio of a multiple
+ * of ch1 value, to the ch0 value, is calculated. Array tsl2x7x_device_lux[]
+ * is then scanned to find the first ratio value that is just above the ratio
+ * we just calculated. The ch0 and ch1 multiplier constants in the array are
+ * then used along with the time scale factor array values, to calculate the
+ * lux.
+ */
+static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
+{
+	u16 ch0, ch1; /* separated ch0/ch1 data from device */
+	u32 lux; /* raw lux calculated from device data */
+	u64 lux64;
+	u32 ratio;
+	u8 buf[4];
+	struct tsl2x7x_lux *p;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int i, ret;
+	u32 ch0lux = 0;
+	u32 ch1lux = 0;
+
+	if (mutex_trylock(&chip->als_mutex) == 0)
+		return chip->als_cur_info.lux; /* busy, so return LAST VALUE */
+
+	if (chip->tsl2x7x_chip_status != TSL2X7X_CHIP_WORKING) {
+		/* device is not enabled */
+		dev_err(&chip->client->dev, "%s: device is not enabled\n",
+				__func__);
+		ret = -EBUSY ;
+		goto out_unlock;
+	}
+
+	ret = tsl2x7x_i2c_read(chip->client,
+		(TSL2X7X_CMD_REG | TSL2X7X_STATUS), &buf[0]);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: Failed to read STATUS Reg\n", __func__);
+		goto out_unlock;
+	}
+	/* is data new & valid */
+	if (!(buf[0] & TSL2X7X_STA_ADC_VALID)) {
+		dev_err(&chip->client->dev,
+			"%s: data not valid yet\n", __func__);
+		ret = chip->als_cur_info.lux; /* return LAST VALUE */
+		goto out_unlock;
+	}
+
+	for (i = 0; i < 4; i++) {
+		ret = tsl2x7x_i2c_read(chip->client,
+			(TSL2X7X_CMD_REG | (TSL2X7X_ALS_CHAN0LO + i)),
+			&buf[i]);
+		if (ret < 0) {
+			dev_err(&chip->client->dev,
+				"%s: failed to read. err=%x\n", __func__, ret);
+			goto out_unlock;
+		}
+	}
+
+	/* clear any existing interrupt status */
+	ret = i2c_smbus_write_byte(chip->client,
+		(TSL2X7X_CMD_REG |
+				TSL2X7X_CMD_SPL_FN |
+				TSL2X7X_CMD_ALS_INT_CLR));
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+		"%s: i2c_write_command failed - err = %d\n",
+			__func__, ret);
+		goto out_unlock; /* have no data, so return failure */
+	}
+
+	/* extract ALS/lux data */
+	ch0 = le16_to_cpup((const __le16 *)&buf[0]);
+	ch1 = le16_to_cpup((const __le16 *)&buf[2]);
+
+	chip->als_cur_info.als_ch0 = ch0;
+	chip->als_cur_info.als_ch1 = ch1;
+
+	if ((ch0 >= chip->als_saturation) || (ch1 >= chip->als_saturation)) {
+		lux = TSL2X7X_LUX_CALC_OVER_FLOW;
+		goto return_max;
+	}
+
+	if (ch0 == 0) {
+		/* have no data, so return LAST VALUE */
+		ret = chip->als_cur_info.lux;
+		goto out_unlock;
+	}
+	/* calculate ratio */
+	ratio = (ch1 << 15) / ch0;
+	/* convert to unscaled lux using the pointer to the table */
+	p = (struct tsl2x7x_lux *) chip->tsl2x7x_device_lux;
+	while (p->ratio != 0 && p->ratio < ratio)
+		p++;
+
+	if (p->ratio == 0) {
+		lux = 0;
+	} else {
+		ch0lux = DIV_ROUND_UP((ch0 * p->ch0),
+			tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]);
+		ch1lux = DIV_ROUND_UP((ch1 * p->ch1),
+			tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain]);
+		lux = ch0lux - ch1lux;
+	}
+
+	/* note: lux is 31 bit max at this point */
+	if (ch1lux > ch0lux) {
+		dev_dbg(&chip->client->dev, "ch1lux > ch0lux-return last value\n");
+		ret = chip->als_cur_info.lux;
+		goto out_unlock;
+	}
+
+	/* adjust for active time scale */
+	if (chip->als_time_scale == 0)
+		lux = 0;
+	else
+		lux = (lux + (chip->als_time_scale >> 1)) /
+			chip->als_time_scale;
+
+	/* adjust for active gain scale
+	 * The tsl2x7x_device_lux tables have a factor of 256 built-in.
+	 * User-specified gain provides a multiplier.
+	 * Apply user-specified gain before shifting right to retain precision.
+	 * Use 64 bits to avoid overflow on multiplication.
+	 * Then go back to 32 bits before division to avoid using div_u64().
+	 */
+
+	lux64 = lux;
+	lux64 = lux64 * chip->tsl2x7x_settings.als_gain_trim;
+	lux64 >>= 8;
+	lux = lux64;
+	lux = (lux + 500) / 1000;
+
+	if (lux > TSL2X7X_LUX_CALC_OVER_FLOW) /* check for overflow */
+		lux = TSL2X7X_LUX_CALC_OVER_FLOW;
+
+	/* Update the structure with the latest lux. */
+return_max:
+	chip->als_cur_info.lux = lux;
+	ret = lux;
+
+out_unlock:
+	mutex_unlock(&chip->als_mutex);
+
+	return ret;
+}
+
+/**
+ * tsl2x7x_get_prox() - Reads proximity data registers and updates
+ *                      chip->prox_data.
+ *
+ * @indio_dev:	pointer to IIO device
+ */
+static int tsl2x7x_get_prox(struct iio_dev *indio_dev)
+{
+	int i;
+	int ret;
+	u8 status;
+	u8 chdata[2];
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (mutex_trylock(&chip->prox_mutex) == 0) {
+		dev_err(&chip->client->dev,
+			"%s: Can't get prox mutex\n", __func__);
+		return -EBUSY;
+	}
+
+	ret = tsl2x7x_i2c_read(chip->client,
+		(TSL2X7X_CMD_REG | TSL2X7X_STATUS), &status);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+		"%s: i2c err=%d\n", __func__, ret);
+		goto prox_poll_err;
+	}
+
+	switch (chip->id) {
+	case tsl2571:
+	case tsl2671:
+	case tmd2671:
+	case tsl2771:
+	case tmd2771:
+		if (!(status & TSL2X7X_STA_ADC_VALID))
+			goto prox_poll_err;
+	break;
+	case tsl2572:
+	case tsl2672:
+	case tmd2672:
+	case tsl2772:
+	case tmd2772:
+		if (!(status & TSL2X7X_STA_PRX_VALID))
+			goto prox_poll_err;
+	break;
+	}
+
+	for (i = 0; i < 2; i++) {
+		ret = tsl2x7x_i2c_read(chip->client,
+			(TSL2X7X_CMD_REG |
+					(TSL2X7X_PRX_LO + i)), &chdata[i]);
+		if (ret < 0)
+			goto prox_poll_err;
+	}
+
+	chip->prox_data =
+			le16_to_cpup((const __le16 *)&chdata[0]);
+
+prox_poll_err:
+
+	mutex_unlock(&chip->prox_mutex);
+
+	return chip->prox_data;
+}
+
+/**
+ * tsl2x7x_defaults() - Populates the device nominal operating parameters
+ *                      with those provided by a 'platform' data struct or
+ *                      with prefined defaults.
+ *
+ * @chip:               pointer to device structure.
+ */
+static void tsl2x7x_defaults(struct tsl2X7X_chip *chip)
+{
+	/* If Operational settings defined elsewhere.. */
+	if (chip->pdata && chip->pdata->platform_default_settings != 0)
+		memcpy(&(chip->tsl2x7x_settings),
+			chip->pdata->platform_default_settings,
+			sizeof(tsl2x7x_default_settings));
+	else
+		memcpy(&(chip->tsl2x7x_settings),
+			&tsl2x7x_default_settings,
+			sizeof(tsl2x7x_default_settings));
+
+	/* Load up the proper lux table. */
+	if (chip->pdata && chip->pdata->platform_lux_table[0].ratio != 0)
+		memcpy(chip->tsl2x7x_device_lux,
+			chip->pdata->platform_lux_table,
+			sizeof(chip->pdata->platform_lux_table));
+	else
+		memcpy(chip->tsl2x7x_device_lux,
+		(struct tsl2x7x_lux *)tsl2x7x_default_lux_table_group[chip->id],
+				MAX_DEFAULT_TABLE_BYTES);
+}
+
+/**
+ * tsl2x7x_als_calibrate() -	Obtain single reading and calculate
+ *                              the als_gain_trim.
+ *
+ * @indio_dev:	pointer to IIO device
+ */
+static int tsl2x7x_als_calibrate(struct iio_dev *indio_dev)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	u8 reg_val;
+	int gain_trim_val;
+	int ret;
+	int lux_val;
+
+	ret = i2c_smbus_write_byte(chip->client,
+			(TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+		"%s: failed to write CNTRL register, ret=%d\n",
+		__func__, ret);
+		return ret;
+	}
+
+	reg_val = i2c_smbus_read_byte(chip->client);
+	if ((reg_val & (TSL2X7X_CNTL_ADC_ENBL | TSL2X7X_CNTL_PWR_ON))
+		!= (TSL2X7X_CNTL_ADC_ENBL | TSL2X7X_CNTL_PWR_ON)) {
+		dev_err(&chip->client->dev,
+			"%s: failed: ADC not enabled\n", __func__);
+		return -1;
+	}
+
+	ret = i2c_smbus_write_byte(chip->client,
+			(TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed to write ctrl reg: ret=%d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	reg_val = i2c_smbus_read_byte(chip->client);
+	if ((reg_val & TSL2X7X_STA_ADC_VALID) != TSL2X7X_STA_ADC_VALID) {
+		dev_err(&chip->client->dev,
+			"%s: failed: STATUS - ADC not valid.\n", __func__);
+		return -ENODATA;
+	}
+
+	lux_val = tsl2x7x_get_lux(indio_dev);
+	if (lux_val < 0) {
+		dev_err(&chip->client->dev,
+		"%s: failed to get lux\n", __func__);
+		return lux_val;
+	}
+
+	gain_trim_val =  (((chip->tsl2x7x_settings.als_cal_target)
+			* chip->tsl2x7x_settings.als_gain_trim) / lux_val);
+	if ((gain_trim_val < 250) || (gain_trim_val > 4000))
+		return -ERANGE;
+
+	chip->tsl2x7x_settings.als_gain_trim = gain_trim_val;
+	dev_info(&chip->client->dev,
+		"%s als_calibrate completed\n", chip->client->name);
+
+	return (int) gain_trim_val;
+}
+
+static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
+{
+	int i;
+	int ret = 0;
+	u8 *dev_reg;
+	u8 utmp;
+	int als_count;
+	int als_time;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	u8 reg_val = 0;
+
+	if (chip->pdata && chip->pdata->power_on)
+		chip->pdata->power_on(indio_dev);
+
+	/* Non calculated parameters */
+	chip->tsl2x7x_config[TSL2X7X_PRX_TIME] =
+			chip->tsl2x7x_settings.prx_time;
+	chip->tsl2x7x_config[TSL2X7X_WAIT_TIME] =
+			chip->tsl2x7x_settings.wait_time;
+	chip->tsl2x7x_config[TSL2X7X_PRX_CONFIG] =
+			chip->tsl2x7x_settings.prox_config;
+
+	chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHLO] =
+		(chip->tsl2x7x_settings.als_thresh_low) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_ALS_MINTHRESHHI] =
+		(chip->tsl2x7x_settings.als_thresh_low >> 8) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_ALS_MAXTHRESHLO] =
+		(chip->tsl2x7x_settings.als_thresh_high) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_ALS_MAXTHRESHHI] =
+		(chip->tsl2x7x_settings.als_thresh_high >> 8) & 0xFF;
+	chip->tsl2x7x_config[TSL2X7X_PERSISTENCE] =
+		chip->tsl2x7x_settings.persistence;
+
+	chip->tsl2x7x_config[TSL2X7X_PRX_COUNT] =
+			chip->tsl2x7x_settings.prox_pulse_count;
+	chip->tsl2x7x_config[TSL2X7X_PRX_MINTHRESHLO] =
+	chip->tsl2x7x_settings.prox_thres_low;
+	chip->tsl2x7x_config[TSL2X7X_PRX_MAXTHRESHLO] =
+			chip->tsl2x7x_settings.prox_thres_high;
+
+	/* and make sure we're not already on */
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
+		/* if forcing a register update - turn off, then on */
+		dev_info(&chip->client->dev, "device is already enabled\n");
+		return -EINVAL;
+	}
+
+	/* determine als integration regster */
+	als_count = (chip->tsl2x7x_settings.als_time * 100 + 135) / 270;
+	if (als_count == 0)
+		als_count = 1; /* ensure at least one cycle */
+
+	/* convert back to time (encompasses overrides) */
+	als_time = (als_count * 27 + 5) / 10;
+	chip->tsl2x7x_config[TSL2X7X_ALS_TIME] = 256 - als_count;
+
+	/* Set the gain based on tsl2x7x_settings struct */
+	chip->tsl2x7x_config[TSL2X7X_GAIN] =
+		(chip->tsl2x7x_settings.als_gain |
+			(TSL2X7X_mA100 | TSL2X7X_DIODE1)
+			| ((chip->tsl2x7x_settings.prox_gain) << 2));
+
+	/* set chip struct re scaling and saturation */
+	chip->als_saturation = als_count * 922; /* 90% of full scale */
+	chip->als_time_scale = (als_time + 25) / 50;
+
+	/* TSL2X7X Specific power-on / adc enable sequence
+	 * Power on the device 1st. */
+	utmp = TSL2X7X_CNTL_PWR_ON;
+	ret = i2c_smbus_write_byte_data(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed on CNTRL reg.\n", __func__);
+		return ret;
+	}
+
+	/* Use the following shadow copy for our delay before enabling ADC.
+	 * Write all the registers. */
+	for (i = 0, dev_reg = chip->tsl2x7x_config;
+			i < TSL2X7X_MAX_CONFIG_REG; i++) {
+		ret = i2c_smbus_write_byte_data(chip->client,
+				TSL2X7X_CMD_REG + i, *dev_reg++);
+		if (ret < 0) {
+			dev_err(&chip->client->dev,
+			"%s: failed on write to reg %d.\n", __func__, i);
+			return ret;
+		}
+	}
+
+	mdelay(3);	/* Power-on settling time */
+
+	/* NOW enable the ADC
+	 * initialize the desired mode of operation */
+	utmp = TSL2X7X_CNTL_PWR_ON |
+			TSL2X7X_CNTL_ADC_ENBL |
+			TSL2X7X_CNTL_PROX_DET_ENBL;
+	ret = i2c_smbus_write_byte_data(chip->client,
+			TSL2X7X_CMD_REG | TSL2X7X_CNTRL, utmp);
+	if (ret < 0) {
+		dev_err(&chip->client->dev,
+			"%s: failed on 2nd CTRL reg.\n", __func__);
+		return ret;
+	}
+
+	chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
+
+	if (chip->tsl2x7x_settings.interrupts_en != 0) {
+		dev_info(&chip->client->dev, "Setting Up Interrupt(s)\n");
+
+		reg_val = TSL2X7X_CNTL_PWR_ON | TSL2X7X_CNTL_ADC_ENBL;
+		if ((chip->tsl2x7x_settings.interrupts_en == 0x20) ||
+			(chip->tsl2x7x_settings.interrupts_en == 0x30))
+			reg_val |= TSL2X7X_CNTL_PROX_DET_ENBL;
+
+		reg_val |= chip->tsl2x7x_settings.interrupts_en;
+		ret = i2c_smbus_write_byte_data(chip->client,
+			(TSL2X7X_CMD_REG | TSL2X7X_CNTRL), reg_val);
+		if (ret < 0)
+			dev_err(&chip->client->dev,
+				"%s: failed in tsl2x7x_IOCTL_INT_SET.\n",
+				__func__);
+
+		/* Clear out any initial interrupts  */
+		ret = i2c_smbus_write_byte(chip->client,
+			TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
+			TSL2X7X_CMD_PROXALS_INT_CLR);
+		if (ret < 0) {
+			dev_err(&chip->client->dev,
+				"%s: Failed to clear Int status\n",
+				__func__);
+		return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int tsl2x7x_chip_off(struct iio_dev *indio_dev)
+{
+	int ret;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	/* turn device off */
+	chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_CNTRL, 0x00);
+
+	if (chip->pdata && chip->pdata->power_off)
+		chip->pdata->power_off(chip->client);
+
+	return ret;
+}
+
+/**
+ * tsl2x7x_invoke_change
+ * @indio_dev:	pointer to IIO device
+ *
+ * Obtain and lock both ALS and PROX resources,
+ * determine and save device state (On/Off),
+ * cycle device to implement updated parameter,
+ * put device back into proper state, and unlock
+ * resource.
+ */
+static
+int tsl2x7x_invoke_change(struct iio_dev *indio_dev)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int device_status = chip->tsl2x7x_chip_status;
+
+	mutex_lock(&chip->als_mutex);
+	mutex_lock(&chip->prox_mutex);
+
+	if (device_status == TSL2X7X_CHIP_WORKING)
+		tsl2x7x_chip_off(indio_dev);
+
+	tsl2x7x_chip_on(indio_dev);
+
+	if (device_status != TSL2X7X_CHIP_WORKING)
+		tsl2x7x_chip_off(indio_dev);
+
+	mutex_unlock(&chip->prox_mutex);
+	mutex_unlock(&chip->als_mutex);
+
+	return 0;
+}
+
+static
+void tsl2x7x_prox_calculate(int *data, int length,
+		struct tsl2x7x_prox_stat *statP)
+{
+	int i;
+	int sample_sum;
+	int tmp;
+
+	if (length == 0)
+		length = 1;
+
+	sample_sum = 0;
+	statP->min = INT_MAX;
+	statP->max = INT_MIN;
+	for (i = 0; i < length; i++) {
+		sample_sum += data[i];
+		statP->min = min(statP->min, data[i]);
+		statP->max = max(statP->max, data[i]);
+	}
+
+	statP->mean = sample_sum / length;
+	sample_sum = 0;
+	for (i = 0; i < length; i++) {
+		tmp = data[i] - statP->mean;
+		sample_sum += tmp * tmp;
+	}
+	statP->stddev = int_sqrt((long)sample_sum)/length;
+}
+
+/**
+ * tsl2x7x_prox_cal() - Calculates std. and sets thresholds.
+ * @indio_dev:	pointer to IIO device
+ *
+ * Calculates a standard deviation based on the samples,
+ * and sets the threshold accordingly.
+ */
+static void tsl2x7x_prox_cal(struct iio_dev *indio_dev)
+{
+	int prox_history[MAX_SAMPLES_CAL + 1];
+	int i;
+	struct tsl2x7x_prox_stat prox_stat_data[2];
+	struct tsl2x7x_prox_stat *calP;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	u8 tmp_irq_settings;
+	u8 current_state = chip->tsl2x7x_chip_status;
+
+	if (chip->tsl2x7x_settings.prox_max_samples_cal > MAX_SAMPLES_CAL) {
+		dev_err(&chip->client->dev,
+			"%s: max prox samples cal is too big: %d\n",
+			__func__, chip->tsl2x7x_settings.prox_max_samples_cal);
+		chip->tsl2x7x_settings.prox_max_samples_cal = MAX_SAMPLES_CAL;
+	}
+
+	/* have to stop to change settings */
+	tsl2x7x_chip_off(indio_dev);
+
+	/* Enable proximity detection save just in case prox not wanted yet*/
+	tmp_irq_settings = chip->tsl2x7x_settings.interrupts_en;
+	chip->tsl2x7x_settings.interrupts_en |= TSL2X7X_CNTL_PROX_INT_ENBL;
+
+	/*turn on device if not already on*/
+	tsl2x7x_chip_on(indio_dev);
+
+	/*gather the samples*/
+	for (i = 0; i < chip->tsl2x7x_settings.prox_max_samples_cal; i++) {
+		mdelay(15);
+		tsl2x7x_get_prox(indio_dev);
+		prox_history[i] = chip->prox_data;
+		dev_info(&chip->client->dev, "2 i=%d prox data= %d\n",
+			i, chip->prox_data);
+	}
+
+	tsl2x7x_chip_off(indio_dev);
+	calP = &prox_stat_data[PROX_STAT_CAL];
+	tsl2x7x_prox_calculate(prox_history,
+		chip->tsl2x7x_settings.prox_max_samples_cal, calP);
+	chip->tsl2x7x_settings.prox_thres_high = (calP->max << 1) - calP->mean;
+
+	dev_info(&chip->client->dev, " cal min=%d mean=%d max=%d\n",
+		calP->min, calP->mean, calP->max);
+	dev_info(&chip->client->dev,
+		"%s proximity threshold set to %d\n",
+		chip->client->name, chip->tsl2x7x_settings.prox_thres_high);
+
+	/* back to the way they were */
+	chip->tsl2x7x_settings.interrupts_en = tmp_irq_settings;
+	if (current_state == TSL2X7X_CHIP_WORKING)
+		tsl2x7x_chip_on(indio_dev);
+}
+
+static ssize_t tsl2x7x_power_state_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_to_iio_dev(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", chip->tsl2x7x_chip_status);
+}
+
+static ssize_t tsl2x7x_power_state_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	bool value;
+
+	if (strtobool(buf, &value))
+		return -EINVAL;
+
+	if (value)
+		tsl2x7x_chip_on(indio_dev);
+	else
+		tsl2x7x_chip_off(indio_dev);
+
+	return len;
+}
+
+static ssize_t tsl2x7x_gain_available_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_to_iio_dev(dev));
+
+	switch (chip->id) {
+	case tsl2571:
+	case tsl2671:
+	case tmd2671:
+	case tsl2771:
+	case tmd2771:
+		return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 128");
+	break;
+	}
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", "1 8 16 120");
+}
+
+static ssize_t tsl2x7x_prox_gain_available_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+		return snprintf(buf, PAGE_SIZE, "%s\n", "1 2 4 8");
+}
+
+static ssize_t tsl2x7x_als_time_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_to_iio_dev(dev));
+	int y, z;
+
+	y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.als_time) + 1;
+	z = y * TSL2X7X_MIN_ITIME;
+	y /= 1000;
+	z %= 1000;
+
+	return snprintf(buf, PAGE_SIZE, "%d.%03d\n", y, z);
+}
+
+static ssize_t tsl2x7x_als_time_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	struct tsl2x7x_parse_result result;
+
+	result.integer = 0;
+	result.fract = 0;
+
+	tsl2x7x_parse_buffer(buf, &result);
+
+	result.fract /= 1000;
+	result.fract /= 3;
+	chip->tsl2x7x_settings.als_time =
+			(TSL2X7X_MAX_TIMER_CNT - (u8)result.fract);
+
+	dev_info(&chip->client->dev, "%s: als time = %d",
+		__func__, chip->tsl2x7x_settings.als_time);
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static IIO_CONST_ATTR(in_illuminance0_integration_time_available,
+		".00272 - .696");
+
+static ssize_t tsl2x7x_als_cal_target_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_to_iio_dev(dev));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			chip->tsl2x7x_settings.als_cal_target);
+}
+
+static ssize_t tsl2x7x_als_cal_target_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	unsigned long value;
+
+	if (kstrtoul(buf, 0, &value))
+		return -EINVAL;
+
+	if (value)
+		chip->tsl2x7x_settings.als_cal_target = value;
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return len;
+}
+
+/* persistence settings */
+static ssize_t tsl2x7x_als_persistence_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_to_iio_dev(dev));
+	int y, z, filter_delay;
+
+	/* Determine integration time */
+	y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.als_time) + 1;
+	z = y * TSL2X7X_MIN_ITIME;
+	filter_delay = z * (chip->tsl2x7x_settings.persistence & 0x0F);
+	y = (filter_delay / 1000);
+	z = (filter_delay % 1000);
+
+	return snprintf(buf, PAGE_SIZE, "%d.%03d\n", y, z);
+}
+
+static ssize_t tsl2x7x_als_persistence_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	struct tsl2x7x_parse_result result;
+	int y, z, filter_delay;
+
+	result.integer = 0;
+	result.fract = 0;
+	tsl2x7x_parse_buffer(buf, &result);
+
+	result.fract /= 1000;
+	y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.als_time) + 1;
+	z = y * TSL2X7X_MIN_ITIME;
+
+	filter_delay =
+		DIV_ROUND_UP(((result.integer * 1000) + result.fract), z);
+
+	chip->tsl2x7x_settings.persistence &= 0xF0;
+	chip->tsl2x7x_settings.persistence |= (filter_delay & 0x0F);
+
+	dev_info(&chip->client->dev, "%s: als persistence = %d",
+		__func__, filter_delay);
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static ssize_t tsl2x7x_prox_persistence_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_to_iio_dev(dev));
+	int y, z, filter_delay;
+
+	/* Determine integration time */
+	y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.prx_time) + 1;
+	z = y * TSL2X7X_MIN_ITIME;
+	filter_delay = z * ((chip->tsl2x7x_settings.persistence & 0xF0) >> 4);
+	y = (filter_delay / 1000);
+	z = (filter_delay % 1000);
+
+	return snprintf(buf, PAGE_SIZE, "%d.%03d\n", y, z);
+}
+
+static ssize_t tsl2x7x_prox_persistence_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	struct tsl2x7x_parse_result result;
+	int y, z, filter_delay;
+
+	result.integer = 0;
+	result.fract = 0;
+	tsl2x7x_parse_buffer(buf, &result);
+
+	result.fract /= 1000;
+	y = (TSL2X7X_MAX_TIMER_CNT - (u8)chip->tsl2x7x_settings.prx_time) + 1;
+	z = y * TSL2X7X_MIN_ITIME;
+
+	filter_delay =
+		DIV_ROUND_UP(((result.integer * 1000) + result.fract), z);
+
+	chip->tsl2x7x_settings.persistence &= 0x0F;
+	chip->tsl2x7x_settings.persistence |= ((filter_delay << 4) & 0xF0);
+
+	dev_info(&chip->client->dev, "%s: prox persistence = %d",
+		__func__, filter_delay);
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static ssize_t tsl2x7x_do_calibrate(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	bool value;
+
+	if (strtobool(buf, &value))
+		return -EINVAL;
+
+	if (value)
+		tsl2x7x_als_calibrate(indio_dev);
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return len;
+}
+
+static ssize_t tsl2x7x_luxtable_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tsl2X7X_chip *chip = iio_priv(dev_to_iio_dev(dev));
+	int i = 0;
+	int offset = 0;
+
+	while (i < (TSL2X7X_MAX_LUX_TABLE_SIZE * 3)) {
+		offset += snprintf(buf + offset, PAGE_SIZE, "%d,%d,%d,",
+			chip->tsl2x7x_device_lux[i].ratio,
+			chip->tsl2x7x_device_lux[i].ch0,
+			chip->tsl2x7x_device_lux[i].ch1);
+		if (chip->tsl2x7x_device_lux[i].ratio == 0) {
+			/* We just printed the first "0" entry.
+			 * Now get rid of the extra "," and break. */
+			offset--;
+			break;
+		}
+		i++;
+	}
+
+	offset += snprintf(buf + offset, PAGE_SIZE, "\n");
+	return offset;
+}
+
+static ssize_t tsl2x7x_luxtable_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int value[ARRAY_SIZE(chip->tsl2x7x_device_lux)*3 + 1];
+	int n;
+
+	get_options(buf, ARRAY_SIZE(value), value);
+
+	/* We now have an array of ints starting at value[1], and
+	 * enumerated by value[0].
+	 * We expect each group of three ints is one table entry,
+	 * and the last table entry is all 0.
+	 */
+	n = value[0];
+	if ((n % 3) || n < 6 ||
+			n > ((ARRAY_SIZE(chip->tsl2x7x_device_lux) - 1) * 3)) {
+		dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n);
+		return -EINVAL;
+	}
+
+	if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) {
+		dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n);
+		return -EINVAL;
+	}
+
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING)
+		tsl2x7x_chip_off(indio_dev);
+
+	/* Zero out the table */
+	memset(chip->tsl2x7x_device_lux, 0, sizeof(chip->tsl2x7x_device_lux));
+	memcpy(chip->tsl2x7x_device_lux, &value[1], (value[0] * 4));
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return len;
+}
+
+static ssize_t tsl2x7x_do_prox_calibrate(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	bool value;
+
+	if (strtobool(buf, &value))
+		return -EINVAL;
+
+	if (value)
+		tsl2x7x_prox_cal(indio_dev);
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return len;
+}
+
+static int tsl2x7x_read_interrupt_config(struct iio_dev *indio_dev,
+					 u64 event_code)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY)
+		ret = !!(chip->tsl2x7x_settings.interrupts_en & 0x10);
+	else
+		ret = !!(chip->tsl2x7x_settings.interrupts_en & 0x20);
+
+	return ret;
+}
+
+static int tsl2x7x_write_interrupt_config(struct iio_dev *indio_dev,
+					  u64 event_code,
+					  int val)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
+		if (val)
+			chip->tsl2x7x_settings.interrupts_en |= 0x10;
+		else
+			chip->tsl2x7x_settings.interrupts_en &= 0x20;
+	} else {
+		if (val)
+			chip->tsl2x7x_settings.interrupts_en |= 0x20;
+		else
+			chip->tsl2x7x_settings.interrupts_en &= 0x10;
+	}
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return 0;
+}
+
+static int tsl2x7x_write_thresh(struct iio_dev *indio_dev,
+				  u64 event_code,
+				  int val)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			chip->tsl2x7x_settings.als_thresh_high = val;
+			break;
+		case IIO_EV_DIR_FALLING:
+			chip->tsl2x7x_settings.als_thresh_low = val;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			chip->tsl2x7x_settings.prox_thres_high = val;
+			break;
+		case IIO_EV_DIR_FALLING:
+			chip->tsl2x7x_settings.prox_thres_low = val;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return 0;
+}
+
+static int tsl2x7x_read_thresh(struct iio_dev *indio_dev,
+			       u64 event_code,
+			       int *val)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	if (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code) == IIO_INTENSITY) {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			*val = chip->tsl2x7x_settings.als_thresh_high;
+			break;
+		case IIO_EV_DIR_FALLING:
+			*val = chip->tsl2x7x_settings.als_thresh_low;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+		case IIO_EV_DIR_RISING:
+			*val = chip->tsl2x7x_settings.prox_thres_high;
+			break;
+		case IIO_EV_DIR_FALLING:
+			*val = chip->tsl2x7x_settings.prox_thres_low;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int tsl2x7x_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val,
+			    int *val2,
+			    long mask)
+{
+	int ret = -EINVAL;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			tsl2x7x_get_lux(indio_dev);
+			*val = chip->als_cur_info.lux;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			return -EINVAL;
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_INTENSITY:
+			tsl2x7x_get_lux(indio_dev);
+			if (chan->channel == 0)
+				*val = chip->als_cur_info.als_ch0;
+			else
+				*val = chip->als_cur_info.als_ch1;
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_PROXIMITY:
+			tsl2x7x_get_prox(indio_dev);
+			*val = chip->prox_data;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			return -EINVAL;
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->type == IIO_LIGHT)
+			*val =
+			tsl2X7X_als_gainadj[chip->tsl2x7x_settings.als_gain];
+		else
+			*val =
+			tsl2X7X_prx_gainadj[chip->tsl2x7x_settings.prox_gain];
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		*val = chip->tsl2x7x_settings.als_gain_trim;
+		ret = IIO_VAL_INT;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int tsl2x7x_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->type == IIO_INTENSITY) {
+			switch (val) {
+			case 1:
+				chip->tsl2x7x_settings.als_gain = 0;
+				break;
+			case 8:
+				chip->tsl2x7x_settings.als_gain = 1;
+				break;
+			case 16:
+				chip->tsl2x7x_settings.als_gain = 2;
+				break;
+			case 120:
+				switch (chip->id) {
+				case tsl2572:
+				case tsl2672:
+				case tmd2672:
+				case tsl2772:
+				case tmd2772:
+					return -EINVAL;
+				break;
+				}
+				chip->tsl2x7x_settings.als_gain = 3;
+				break;
+			case 128:
+				switch (chip->id) {
+				case tsl2571:
+				case tsl2671:
+				case tmd2671:
+				case tsl2771:
+				case tmd2771:
+					return -EINVAL;
+				break;
+				}
+				chip->tsl2x7x_settings.als_gain = 3;
+				break;
+			default:
+				return -EINVAL;
+			}
+		} else {
+			switch (val) {
+			case 1:
+				chip->tsl2x7x_settings.prox_gain = 0;
+				break;
+			case 2:
+				chip->tsl2x7x_settings.prox_gain = 1;
+				break;
+			case 4:
+				chip->tsl2x7x_settings.prox_gain = 2;
+				break;
+			case 8:
+				chip->tsl2x7x_settings.prox_gain = 3;
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		chip->tsl2x7x_settings.als_gain_trim = val;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	tsl2x7x_invoke_change(indio_dev);
+
+	return 0;
+}
+
+static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
+		tsl2x7x_power_state_show, tsl2x7x_power_state_store);
+
+static DEVICE_ATTR(in_proximity0_calibscale_available, S_IRUGO,
+		tsl2x7x_prox_gain_available_show, NULL);
+
+static DEVICE_ATTR(in_illuminance0_calibscale_available, S_IRUGO,
+		tsl2x7x_gain_available_show, NULL);
+
+static DEVICE_ATTR(in_illuminance0_integration_time, S_IRUGO | S_IWUSR,
+		tsl2x7x_als_time_show, tsl2x7x_als_time_store);
+
+static DEVICE_ATTR(in_illuminance0_target_input, S_IRUGO | S_IWUSR,
+		tsl2x7x_als_cal_target_show, tsl2x7x_als_cal_target_store);
+
+static DEVICE_ATTR(in_illuminance0_calibrate, S_IWUSR, NULL,
+		tsl2x7x_do_calibrate);
+
+static DEVICE_ATTR(in_proximity0_calibrate, S_IWUSR, NULL,
+		tsl2x7x_do_prox_calibrate);
+
+static DEVICE_ATTR(in_illuminance0_lux_table, S_IRUGO | S_IWUSR,
+		tsl2x7x_luxtable_show, tsl2x7x_luxtable_store);
+
+static DEVICE_ATTR(in_intensity0_thresh_period, S_IRUGO | S_IWUSR,
+		tsl2x7x_als_persistence_show, tsl2x7x_als_persistence_store);
+
+static DEVICE_ATTR(in_proximity0_thresh_period, S_IRUGO | S_IWUSR,
+		tsl2x7x_prox_persistence_show, tsl2x7x_prox_persistence_store);
+
+/* Use the default register values to identify the Taos device */
+static int tsl2x7x_device_id(unsigned char *id, int target)
+{
+	switch (target) {
+	case tsl2571:
+	case tsl2671:
+	case tsl2771:
+		return ((*id & 0xf0) == TRITON_ID);
+	break;
+	case tmd2671:
+	case tmd2771:
+		return ((*id & 0xf0) == HALIBUT_ID);
+	break;
+	case tsl2572:
+	case tsl2672:
+	case tmd2672:
+	case tsl2772:
+	case tmd2772:
+		return ((*id & 0xf0) == SWORDFISH_ID);
+	break;
+	}
+
+	return -EINVAL;
+}
+
+static irqreturn_t tsl2x7x_event_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	s64 timestamp = iio_get_time_ns();
+	int ret;
+	u8 value;
+
+	value = i2c_smbus_read_byte_data(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_STATUS);
+
+	/* What type of interrupt do we need to process */
+	if (value & TSL2X7X_STA_PRX_INTR) {
+		tsl2x7x_get_prox(indio_dev); /* freshen data for ABI */
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
+						    0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_EITHER),
+						    timestamp);
+	}
+
+	if (value & TSL2X7X_STA_ALS_INTR) {
+		tsl2x7x_get_lux(indio_dev); /* freshen data for ABI */
+		iio_push_event(indio_dev,
+		       IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+					    0,
+					    IIO_EV_TYPE_THRESH,
+					    IIO_EV_DIR_EITHER),
+					    timestamp);
+	}
+	/* Clear interrupt now that we have handled it. */
+	ret = i2c_smbus_write_byte(chip->client,
+		TSL2X7X_CMD_REG | TSL2X7X_CMD_SPL_FN |
+		TSL2X7X_CMD_PROXALS_INT_CLR);
+	if (ret < 0)
+		dev_err(&chip->client->dev,
+			"%s: Failed to clear irq from event handler. err = %d\n",
+			__func__, ret);
+
+	return IRQ_HANDLED;
+}
+
+static struct attribute *tsl2x7x_ALS_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_in_illuminance0_calibscale_available.attr,
+	&dev_attr_in_illuminance0_integration_time.attr,
+	&iio_const_attr_in_illuminance0_integration_time_available\
+	.dev_attr.attr,
+	&dev_attr_in_illuminance0_target_input.attr,
+	&dev_attr_in_illuminance0_calibrate.attr,
+	&dev_attr_in_illuminance0_lux_table.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_PRX_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_in_proximity0_calibrate.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_ALSPRX_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_in_illuminance0_calibscale_available.attr,
+	&dev_attr_in_illuminance0_integration_time.attr,
+	&iio_const_attr_in_illuminance0_integration_time_available\
+	.dev_attr.attr,
+	&dev_attr_in_illuminance0_target_input.attr,
+	&dev_attr_in_illuminance0_calibrate.attr,
+	&dev_attr_in_illuminance0_lux_table.attr,
+	&dev_attr_in_proximity0_calibrate.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_PRX2_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_in_proximity0_calibrate.attr,
+	&dev_attr_in_proximity0_calibscale_available.attr,
+	NULL
+};
+
+static struct attribute *tsl2x7x_ALSPRX2_device_attrs[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_in_illuminance0_calibscale_available.attr,
+	&dev_attr_in_illuminance0_integration_time.attr,
+	&iio_const_attr_in_illuminance0_integration_time_available\
+	.dev_attr.attr,
+	&dev_attr_in_illuminance0_target_input.attr,
+	&dev_attr_in_illuminance0_calibrate.attr,
+	&dev_attr_in_illuminance0_lux_table.attr,
+	&dev_attr_in_proximity0_calibrate.attr,
+	&dev_attr_in_proximity0_calibscale_available.attr,
+	NULL
+};
+
+static struct attribute *tsl2X7X_ALS_event_attrs[] = {
+	&dev_attr_in_intensity0_thresh_period.attr,
+	NULL,
+};
+static struct attribute *tsl2X7X_PRX_event_attrs[] = {
+	&dev_attr_in_proximity0_thresh_period.attr,
+	NULL,
+};
+
+static struct attribute *tsl2X7X_ALSPRX_event_attrs[] = {
+	&dev_attr_in_intensity0_thresh_period.attr,
+	&dev_attr_in_proximity0_thresh_period.attr,
+	NULL,
+};
+
+static const struct attribute_group tsl2X7X_device_attr_group_tbl[] = {
+	[ALS] = {
+		.attrs = tsl2x7x_ALS_device_attrs,
+	},
+	[PRX] = {
+		.attrs = tsl2x7x_PRX_device_attrs,
+	},
+	[ALSPRX] = {
+		.attrs = tsl2x7x_ALSPRX_device_attrs,
+	},
+	[PRX2] = {
+		.attrs = tsl2x7x_PRX2_device_attrs,
+	},
+	[ALSPRX2] = {
+		.attrs = tsl2x7x_ALSPRX2_device_attrs,
+	},
+};
+
+static struct attribute_group tsl2X7X_event_attr_group_tbl[] = {
+	[ALS] = {
+		.attrs = tsl2X7X_ALS_event_attrs,
+		.name = "events",
+	},
+	[PRX] = {
+		.attrs = tsl2X7X_PRX_event_attrs,
+		.name = "events",
+	},
+	[ALSPRX] = {
+		.attrs = tsl2X7X_ALSPRX_event_attrs,
+		.name = "events",
+	},
+};
+
+static const struct iio_info tsl2X7X_device_info[] = {
+	[ALS] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[ALS],
+		.event_attrs = &tsl2X7X_event_attr_group_tbl[ALS],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[PRX] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[PRX],
+		.event_attrs = &tsl2X7X_event_attr_group_tbl[PRX],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[ALSPRX] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[ALSPRX],
+		.event_attrs = &tsl2X7X_event_attr_group_tbl[ALSPRX],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[PRX2] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[PRX2],
+		.event_attrs = &tsl2X7X_event_attr_group_tbl[PRX],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+	[ALSPRX2] = {
+		.attrs = &tsl2X7X_device_attr_group_tbl[ALSPRX2],
+		.event_attrs = &tsl2X7X_event_attr_group_tbl[ALSPRX],
+		.driver_module = THIS_MODULE,
+		.read_raw = &tsl2x7x_read_raw,
+		.write_raw = &tsl2x7x_write_raw,
+		.read_event_value = &tsl2x7x_read_thresh,
+		.write_event_value = &tsl2x7x_write_thresh,
+		.read_event_config = &tsl2x7x_read_interrupt_config,
+		.write_event_config = &tsl2x7x_write_interrupt_config,
+	},
+};
+
+static const struct tsl2x7x_chip_info tsl2x7x_chip_info_tbl[] = {
+	[ALS] = {
+		.channel = {
+			{
+			.type = IIO_LIGHT,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 1,
+			},
+		},
+	.chan_table_elements = 3,
+	.info = &tsl2X7X_device_info[ALS],
+	},
+	[PRX] = {
+		.channel = {
+			{
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 1,
+	.info = &tsl2X7X_device_info[PRX],
+	},
+	[ALSPRX] = {
+		.channel = {
+			{
+			.type = IIO_LIGHT,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 1,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+			}, {
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 4,
+	.info = &tsl2X7X_device_info[ALSPRX],
+	},
+	[PRX2] = {
+		.channel = {
+			{
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 1,
+	.info = &tsl2X7X_device_info[PRX2],
+	},
+	[ALSPRX2] = {
+		.channel = {
+			{
+			.type = IIO_LIGHT,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			}, {
+			.type = IIO_INTENSITY,
+			.indexed = 1,
+			.channel = 1,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+			}, {
+			.type = IIO_PROXIMITY,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+				IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+			.event_mask = TSL2X7X_EVENT_MASK
+			},
+		},
+	.chan_table_elements = 4,
+	.info = &tsl2X7X_device_info[ALSPRX2],
+	},
+};
+
+static int __devinit tsl2x7x_probe(struct i2c_client *clientp,
+	const struct i2c_device_id *id)
+{
+	int ret;
+	unsigned char device_id;
+	struct iio_dev *indio_dev;
+	struct tsl2X7X_chip *chip;
+
+	indio_dev = iio_device_alloc(sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+	chip->client = clientp;
+	i2c_set_clientdata(clientp, indio_dev);
+
+	ret = tsl2x7x_i2c_read(chip->client,
+		TSL2X7X_CHIPID, &device_id);
+	if (ret < 0)
+		goto fail1;
+
+	if ((!tsl2x7x_device_id(&device_id, id->driver_data)) ||
+		(tsl2x7x_device_id(&device_id, id->driver_data) == -EINVAL)) {
+		dev_info(&chip->client->dev,
+				"%s: i2c device found does not match expected id\n",
+				__func__);
+		goto fail1;
+	}
+
+	ret = i2c_smbus_write_byte(clientp, (TSL2X7X_CMD_REG | TSL2X7X_CNTRL));
+	if (ret < 0) {
+		dev_err(&clientp->dev, "%s: write to cmd reg failed. err = %d\n",
+				__func__, ret);
+		goto fail1;
+	}
+
+	/* ALS and PROX functions can be invoked via user space poll
+	 * or H/W interrupt. If busy return last sample. */
+	mutex_init(&chip->als_mutex);
+	mutex_init(&chip->prox_mutex);
+
+	chip->tsl2x7x_chip_status = TSL2X7X_CHIP_UNKNOWN;
+	chip->pdata = clientp->dev.platform_data;
+	chip->id = id->driver_data;
+	chip->chip_info =
+		&tsl2x7x_chip_info_tbl[device_channel_config[id->driver_data]];
+
+	indio_dev->info = chip->chip_info->info;
+	indio_dev->dev.parent = &clientp->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = chip->client->name;
+	indio_dev->channels = chip->chip_info->channel;
+	indio_dev->num_channels = chip->chip_info->chan_table_elements;
+
+	if (clientp->irq) {
+		ret = request_threaded_irq(clientp->irq,
+					   NULL,
+					   &tsl2x7x_event_handler,
+					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					   "TSL2X7X_event",
+					   indio_dev);
+		if (ret) {
+			dev_err(&clientp->dev,
+				"%s: irq request failed", __func__);
+			goto fail2;
+		}
+	}
+
+	/* Load up the defaults */
+	tsl2x7x_defaults(chip);
+	/* Make sure the chip is on */
+	tsl2x7x_chip_on(indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&clientp->dev,
+			"%s: iio registration failed\n", __func__);
+		goto fail1;
+	}
+
+	dev_info(&clientp->dev, "%s Light sensor found.\n", id->name);
+
+	return 0;
+
+fail1:
+	if (clientp->irq)
+		free_irq(clientp->irq, indio_dev);
+fail2:
+	iio_device_free(indio_dev);
+
+	return ret;
+}
+
+static int tsl2x7x_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
+		ret = tsl2x7x_chip_off(indio_dev);
+		chip->tsl2x7x_chip_status = TSL2X7X_CHIP_SUSPENDED;
+	}
+
+	if (chip->pdata && chip->pdata->platform_power) {
+		pm_message_t pmm = {PM_EVENT_SUSPEND};
+		chip->pdata->platform_power(dev, pmm);
+	}
+
+	return ret;
+}
+
+static int tsl2x7x_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2X7X_chip *chip = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (chip->pdata && chip->pdata->platform_power) {
+		pm_message_t pmm = {PM_EVENT_RESUME};
+		chip->pdata->platform_power(dev, pmm);
+	}
+
+	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_SUSPENDED)
+		ret = tsl2x7x_chip_on(indio_dev);
+
+	return ret;
+}
+
+static int __devexit tsl2x7x_remove(struct i2c_client *client)
+{
+	struct tsl2X7X_chip *chip = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = iio_priv_to_dev(chip);
+
+	tsl2x7x_chip_off(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	if (client->irq)
+		free_irq(client->irq, chip->client->name);
+
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+static struct i2c_device_id tsl2x7x_idtable[] = {
+	{ "tsl2571", tsl2571 },
+	{ "tsl2671", tsl2671 },
+	{ "tmd2671", tmd2671 },
+	{ "tsl2771", tsl2771 },
+	{ "tmd2771", tmd2771 },
+	{ "tsl2572", tsl2572 },
+	{ "tsl2672", tsl2672 },
+	{ "tmd2672", tmd2672 },
+	{ "tsl2772", tsl2772 },
+	{ "tmd2772", tmd2772 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, tsl2x7x_idtable);
+
+static const struct dev_pm_ops tsl2x7x_pm_ops = {
+	.suspend = tsl2x7x_suspend,
+	.resume  = tsl2x7x_resume,
+};
+
+/* Driver definition */
+static struct i2c_driver tsl2x7x_driver = {
+	.driver = {
+		.name = "tsl2x7x",
+		.pm = &tsl2x7x_pm_ops,
+	},
+	.id_table = tsl2x7x_idtable,
+	.probe = tsl2x7x_probe,
+	.remove = __devexit_p(tsl2x7x_remove),
+};
+
+module_i2c_driver(tsl2x7x_driver);
+
+MODULE_AUTHOR("J. August Brenner<jbrenner@taosinc.com>");
+MODULE_DESCRIPTION("TAOS tsl2x7x ambient and proximity light sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/machine.h b/drivers/staging/iio/machine.h
deleted file mode 100644
index 0b1f19bfdc44..000000000000
--- a/drivers/staging/iio/machine.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Industrial I/O in kernel access map definitions for board files.
- *
- * Copyright (c) 2011 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-/**
- * struct iio_map - description of link between consumer and device channels
- * @adc_channel_label:	Label used to identify the channel on the provider.
- *			This is matched against the datasheet_name element
- *			of struct iio_chan_spec.
- * @consumer_dev_name:	Name to uniquely identify the consumer device.
- * @consumer_channel:	Unique name used to idenitify the channel on the
- *			consumer side.
- */
-struct iio_map {
-	const char *adc_channel_label;
-	const char *consumer_dev_name;
-	const char *consumer_channel;
-};
diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
index 722c4e13f713..b9d932595ba9 100644
--- a/drivers/staging/iio/magnetometer/Kconfig
+++ b/drivers/staging/iio/magnetometer/Kconfig
@@ -15,13 +15,13 @@ config SENSORS_AK8975
 	  will be called ak8975.
 
 config SENSORS_HMC5843
-	tristate "Honeywell HMC5843 3-Axis Magnetometer"
+	tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
 	depends on I2C
 	help
-	  Say Y here to add support for the Honeywell HMC 5843 3-Axis
-	  Magnetometer (digital compass).
+	  Say Y here to add support for the Honeywell HMC5843, HMC5883 and
+	  HMC5883L 3-Axis Magnetometer (digital compass).
 
 	  To compile this driver as a module, choose M here: the module
-	  will be called hmc5843
+	  will be called hmc5843.
 
 endmenu
diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c
index ebc2d0840caf..5834e4a70f8c 100644
--- a/drivers/staging/iio/magnetometer/ak8975.c
+++ b/drivers/staging/iio/magnetometer/ak8975.c
@@ -30,8 +30,8 @@
 
 #include <linux/gpio.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 /*
  * Register definitions, as well as various shifts and masks to get at the
  * individual fields of the registers.
@@ -242,7 +242,7 @@ static int ak8975_setup(struct i2c_client *client)
 static ssize_t show_mode(struct device *dev, struct device_attribute *devattr,
 			 char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ak8975_data *data = iio_priv(indio_dev);
 
 	return sprintf(buf, "%u\n", data->mode);
@@ -255,7 +255,7 @@ static ssize_t show_mode(struct device *dev, struct device_attribute *devattr,
 static ssize_t store_mode(struct device *dev, struct device_attribute *devattr,
 			  const char *buf, size_t count)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ak8975_data *data = iio_priv(indio_dev);
 	struct i2c_client *client = data->client;
 	bool value;
@@ -431,7 +431,7 @@ static int ak8975_read_raw(struct iio_dev *indio_dev,
 	struct ak8975_data *data = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		return ak8975_read_axis(indio_dev, chan->address, val);
 	case IIO_CHAN_INFO_SCALE:
 		*val = data->raw_to_gauss[chan->address];
@@ -445,7 +445,8 @@ static int ak8975_read_raw(struct iio_dev *indio_dev,
 		.type = IIO_MAGN,					\
 		.modified = 1,						\
 		.channel2 = IIO_MOD_##axis,				\
-		.info_mask = IIO_CHAN_INFO_SCALE_SEPARATE_BIT,	\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+			     IIO_CHAN_INFO_SCALE_SEPARATE_BIT,		\
 		.address = index,					\
 	}
 
@@ -505,7 +506,7 @@ static int ak8975_probe(struct i2c_client *client,
 	}
 
 	/* Register with IIO */
-	indio_dev = iio_allocate_device(sizeof(*data));
+	indio_dev = iio_device_alloc(sizeof(*data));
 	if (indio_dev == NULL) {
 		err = -ENOMEM;
 		goto exit_gpio;
@@ -536,7 +537,7 @@ static int ak8975_probe(struct i2c_client *client,
 	return 0;
 
 exit_free_iio:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 exit_gpio:
 	if (gpio_is_valid(eoc_gpio))
 		gpio_free(eoc_gpio);
@@ -554,7 +555,7 @@ static int ak8975_remove(struct i2c_client *client)
 	if (gpio_is_valid(data->eoc_gpio))
 		gpio_free(data->eoc_gpio);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
index e00b416c4d33..c1fa09f07625 100644
--- a/drivers/staging/iio/magnetometer/hmc5843.c
+++ b/drivers/staging/iio/magnetometer/hmc5843.c
@@ -2,6 +2,8 @@
     Author: Shubhrajyoti Datta <shubhrajyoti@ti.com>
     Acknowledgement: Jonathan Cameron <jic23@cam.ac.uk> for valuable inputs.
 
+    Support for HMC5883 and HMC5883L by Peter Meerwald <pmeerw@pmeerw.net>.
+
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
@@ -22,10 +24,8 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include "../iio.h"
-#include "../sysfs.h"
-
-#define HMC5843_I2C_ADDRESS			0x1E
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define HMC5843_CONFIG_REG_A			0x00
 #define HMC5843_CONFIG_REG_B			0x01
@@ -36,110 +36,185 @@
 #define HMC5843_DATA_OUT_Y_LSB_REG		0x06
 #define HMC5843_DATA_OUT_Z_MSB_REG		0x07
 #define HMC5843_DATA_OUT_Z_LSB_REG		0x08
+/* Beware: Y and Z are exchanged on HMC5883 */
+#define HMC5883_DATA_OUT_Z_MSB_REG		0x05
+#define HMC5883_DATA_OUT_Z_LSB_REG		0x06
+#define HMC5883_DATA_OUT_Y_MSB_REG		0x07
+#define HMC5883_DATA_OUT_Y_LSB_REG		0x08
 #define HMC5843_STATUS_REG			0x09
 #define HMC5843_ID_REG_A			0x0A
 #define HMC5843_ID_REG_B			0x0B
 #define HMC5843_ID_REG_C			0x0C
 
+enum hmc5843_ids {
+	HMC5843_ID,
+	HMC5883_ID,
+	HMC5883L_ID,
+};
+
+/*
+ * Beware: identification of the HMC5883 is still "H43";
+ * I2C address is also unchanged
+ */
 #define HMC5843_ID_REG_LENGTH			0x03
 #define HMC5843_ID_STRING			"H43"
+#define HMC5843_I2C_ADDRESS			0x1E
 
 /*
- * Range settings in  (+-)Ga
- * */
-#define RANGE_GAIN_OFFSET			0x05
-
-#define	RANGE_0_7				0x00
-#define	RANGE_1_0				0x01 /* default */
-#define	RANGE_1_5				0x02
-#define	RANGE_2_0				0x03
-#define	RANGE_3_2				0x04
-#define	RANGE_3_8				0x05
-#define	RANGE_4_5				0x06
-#define	RANGE_6_5				0x07 /* Not recommended */
+ * Range gain settings in (+-)Ga
+ * Beware: HMC5843 and HMC5883 have different recommended sensor field
+ * ranges; default corresponds to +-1.0 Ga and +-1.3 Ga, respectively
+ */
+#define HMC5843_RANGE_GAIN_OFFSET		0x05
+#define HMC5843_RANGE_GAIN_DEFAULT		0x01
+#define HMC5843_RANGE_GAIN_MAX			0x07
 
 /*
  * Device status
  */
-#define	DATA_READY				0x01
-#define	DATA_OUTPUT_LOCK			0x02
-#define	VOLTAGE_REGULATOR_ENABLED		0x04
+#define HMC5843_DATA_READY			0x01
+#define HMC5843_DATA_OUTPUT_LOCK		0x02
+/* Does not exist on HMC5883, not used */
+#define HMC5843_VOLTAGE_REGULATOR_ENABLED	0x04
 
 /*
  * Mode register configuration
  */
-#define	MODE_CONVERSION_CONTINUOUS		0x00
-#define	MODE_CONVERSION_SINGLE			0x01
-#define	MODE_IDLE				0x02
-#define	MODE_SLEEP				0x03
-
-/* Minimum Data Output Rate in 1/10 Hz  */
-#define RATE_OFFSET				0x02
-#define RATE_BITMASK				0x1C
-#define	RATE_5					0x00
-#define	RATE_10					0x01
-#define	RATE_20					0x02
-#define	RATE_50					0x03
-#define	RATE_100				0x04
-#define	RATE_200				0x05
-#define	RATE_500				0x06
-#define	RATE_NOT_USED				0x07
+#define HMC5843_MODE_CONVERSION_CONTINUOUS	0x00
+#define HMC5843_MODE_CONVERSION_SINGLE		0x01
+#define HMC5843_MODE_IDLE			0x02
+#define HMC5843_MODE_SLEEP			0x03
+#define HMC5843_MODE_MASK			0x03
+
+/*
+ * HMC5843: Minimum data output rate
+ * HMC5883: Typical data output rate
+ */
+#define HMC5843_RATE_OFFSET			0x02
+#define HMC5843_RATE_BITMASK			0x1C
+#define HMC5843_RATE_NOT_USED			0x07
 
 /*
- * Device Configuration
+ * Device measurement configuration
  */
-#define	CONF_NORMAL				0x00
-#define	CONF_POSITIVE_BIAS			0x01
-#define	CONF_NEGATIVE_BIAS			0x02
-#define	CONF_NOT_USED				0x03
-#define	MEAS_CONF_MASK				0x03
+#define HMC5843_MEAS_CONF_NORMAL		0x00
+#define HMC5843_MEAS_CONF_POSITIVE_BIAS		0x01
+#define HMC5843_MEAS_CONF_NEGATIVE_BIAS		0x02
+#define HMC5843_MEAS_CONF_NOT_USED		0x03
+#define HMC5843_MEAS_CONF_MASK			0x03
 
-static int hmc5843_regval_to_nanoscale[] = {
+/*
+ * Scaling factors: 10000000/Gain
+ */
+static const int hmc5843_regval_to_nanoscale[] = {
 	6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714
 };
 
-static const int regval_to_input_field_mg[] = {
-	700,
-	1000,
-	1500,
-	2000,
-	3200,
-	3800,
-	4500,
-	6500
+static const int hmc5883_regval_to_nanoscale[] = {
+	7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662
 };
-static const char * const regval_to_samp_freq[] = {
-	"0.5",
-	"1",
-	"2",
-	"5",
-	"10",
-	"20",
-	"50",
+
+static const int hmc5883l_regval_to_nanoscale[] = {
+	7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478
+};
+
+/*
+ * From the HMC5843 datasheet:
+ * Value	| Sensor input field range (Ga)	| Gain (counts/milli-Gauss)
+ * 0		| (+-)0.7			| 1620
+ * 1		| (+-)1.0			| 1300
+ * 2		| (+-)1.5			| 970
+ * 3		| (+-)2.0			| 780
+ * 4		| (+-)3.2			| 530
+ * 5		| (+-)3.8			| 460
+ * 6		| (+-)4.5			| 390
+ * 7		| (+-)6.5			| 280
+ *
+ * From the HMC5883 datasheet:
+ * Value	| Recommended sensor field range (Ga)	| Gain (counts/Gauss)
+ * 0		| (+-)0.9				| 1280
+ * 1		| (+-)1.2				| 1024
+ * 2		| (+-)1.9				| 768
+ * 3		| (+-)2.5				| 614
+ * 4		| (+-)4.0				| 415
+ * 5		| (+-)4.6				| 361
+ * 6		| (+-)5.5				| 307
+ * 7		| (+-)7.9				| 219
+ *
+ * From the HMC5883L datasheet:
+ * Value	| Recommended sensor field range (Ga)	| Gain (LSB/Gauss)
+ * 0		| (+-)0.88				| 1370
+ * 1		| (+-)1.3				| 1090
+ * 2		| (+-)1.9				| 820
+ * 3		| (+-)2.5				| 660
+ * 4		| (+-)4.0				| 440
+ * 5		| (+-)4.7				| 390
+ * 6		| (+-)5.6				| 330
+ * 7		| (+-)8.1				| 230
+ */
+static const int hmc5843_regval_to_input_field_mga[] = {
+	700, 1000, 1500, 2000, 3200, 3800, 4500, 6500
+};
+
+static const int hmc5883_regval_to_input_field_mga[] = {
+	900, 1200, 1900, 2500, 4000, 4600, 5500, 7900
+};
+
+static const int hmc5883l_regval_to_input_field_mga[] = {
+	880, 1300, 1900, 2500, 4000, 4700, 5600, 8100
+};
+
+/*
+ * From the datasheet:
+ * Value	| HMC5843		| HMC5883/HMC5883L
+ *		| Data output rate (Hz)	| Data output rate (Hz)
+ * 0		| 0.5			| 0.75
+ * 1		| 1			| 1.5
+ * 2		| 2			| 3
+ * 3		| 5			| 7.5
+ * 4		| 10 (default)		| 15
+ * 5		| 20			| 30
+ * 6		| 50			| 75
+ * 7		| Not used		| Not used
+ */
+static const char * const hmc5843_regval_to_sample_freq[] = {
+	"0.5", "1", "2", "5", "10", "20", "50",
+};
+
+static const char * const hmc5883_regval_to_sample_freq[] = {
+	"0.75", "1.5", "3", "7.5", "15", "30", "75",
 };
 
 /* Addresses to scan: 0x1E */
 static const unsigned short normal_i2c[] = { HMC5843_I2C_ADDRESS,
-							I2C_CLIENT_END };
+					     I2C_CLIENT_END };
+
+/* Describe chip variants */
+struct hmc5843_chip_info {
+	const struct iio_chan_spec *channels;
+	int num_channels;
+	const char * const *regval_to_sample_freq;
+	const int *regval_to_input_field_mga;
+	const int *regval_to_nanoscale;
+};
 
 /* Each client has this additional data */
 struct hmc5843_data {
 	struct mutex lock;
-	u8		rate;
-	u8		meas_conf;
-	u8		operating_mode;
-	u8		range;
+	u8 rate;
+	u8 meas_conf;
+	u8 operating_mode;
+	u8 range;
+	const struct hmc5843_chip_info *variant;
 };
 
-static void hmc5843_init_client(struct i2c_client *client);
-
+/* The lower two bits contain the current conversion mode */
 static s32 hmc5843_configure(struct i2c_client *client,
 				       u8 operating_mode)
 {
-	/* The lower two bits contain the current conversion mode */
 	return i2c_smbus_write_byte_data(client,
 					HMC5843_MODE_REG,
-					(operating_mode & 0x03));
+					operating_mode & HMC5843_MODE_MASK);
 }
 
 /* Return the measurement value from the specified channel */
@@ -153,7 +228,7 @@ static int hmc5843_read_measurement(struct iio_dev *indio_dev,
 
 	mutex_lock(&data->lock);
 	result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG);
-	while (!(result & DATA_READY))
+	while (!(result & HMC5843_DATA_READY))
 		result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG);
 
 	result = i2c_smbus_read_word_data(client, address);
@@ -161,30 +236,29 @@ static int hmc5843_read_measurement(struct iio_dev *indio_dev,
 	if (result < 0)
 		return -EINVAL;
 
-	*val	= (s16)swab16((u16)result);
+	*val = (s16)swab16((u16)result);
 	return IIO_VAL_INT;
 }
 
-
 /*
- * From the datasheet
+ * From the datasheet:
  * 0 - Continuous-Conversion Mode: In continuous-conversion mode, the
- * device continuously performs conversions and places the result in the
- * data register.
+ *     device continuously performs conversions and places the result in
+ *     the data register.
  *
- * 1 - Single-Conversion Mode : device performs a single measurement,
- *  sets RDY high and returned to sleep mode
+ * 1 - Single-Conversion Mode : Device performs a single measurement,
+ *     sets RDY high and returns to sleep mode.
  *
- * 2 - Idle Mode :  Device is placed in idle mode.
+ * 2 - Idle Mode : Device is placed in idle mode.
  *
- * 3 - Sleep Mode. Device is placed in sleep mode.
+ * 3 - Sleep Mode : Device is placed in sleep mode.
  *
  */
 static ssize_t hmc5843_show_operating_mode(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct hmc5843_data *data = iio_priv(indio_dev);
 	return sprintf(buf, "%d\n", data->operating_mode);
 }
@@ -194,21 +268,22 @@ static ssize_t hmc5843_set_operating_mode(struct device *dev,
 				const char *buf,
 				size_t count)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
 	struct hmc5843_data *data = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	unsigned long operating_mode = 0;
 	s32 status;
 	int error;
+
 	mutex_lock(&data->lock);
-	error = strict_strtoul(buf, 10, &operating_mode);
+	error = kstrtoul(buf, 10, &operating_mode);
 	if (error) {
 		count = error;
 		goto exit;
 	}
-	dev_dbg(dev, "set Conversion mode to %lu\n", operating_mode);
-	if (operating_mode > MODE_SLEEP) {
+	dev_dbg(dev, "set conversion mode to %lu\n", operating_mode);
+	if (operating_mode > HMC5843_MODE_SLEEP) {
 		count = -EINVAL;
 		goto exit;
 	}
@@ -225,6 +300,7 @@ exit:
 	mutex_unlock(&data->lock);
 	return count;
 }
+
 static IIO_DEVICE_ATTR(operating_mode,
 			S_IWUSR | S_IRUGO,
 			hmc5843_show_operating_mode,
@@ -234,25 +310,29 @@ static IIO_DEVICE_ATTR(operating_mode,
 /*
  * API for setting the measurement configuration to
  * Normal, Positive bias and Negative bias
- * From the datasheet
  *
- * Normal measurement configuration (default): In normal measurement
- * configuration the device follows normal measurement flow. Pins BP and BN
- * are left floating and high impedance.
+ * From the datasheet:
+ * 0 - Normal measurement configuration (default): In normal measurement
+ *     configuration the device follows normal measurement flow. Pins BP
+ *     and BN are left floating and high impedance.
  *
- * Positive bias configuration: In positive bias configuration, a positive
- * current is forced across the resistive load on pins BP and BN.
+ * 1 - Positive bias configuration: In positive bias configuration, a
+ *     positive current is forced across the resistive load on pins BP
+ *     and BN.
  *
- * Negative bias configuration. In negative bias configuration, a negative
- * current is forced across the resistive load on pins BP and BN.
+ * 2 - Negative bias configuration. In negative bias configuration, a
+ *     negative current is forced across the resistive load on pins BP
+ *     and BN.
  *
  */
 static s32 hmc5843_set_meas_conf(struct i2c_client *client,
 				      u8 meas_conf)
 {
-	struct hmc5843_data *data = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct hmc5843_data *data = iio_priv(indio_dev);
 	u8 reg_val;
-	reg_val = (meas_conf & MEAS_CONF_MASK) |  (data->rate << RATE_OFFSET);
+	reg_val = (meas_conf & HMC5843_MEAS_CONF_MASK) |
+		(data->rate << HMC5843_RATE_OFFSET);
 	return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val);
 }
 
@@ -260,7 +340,7 @@ static ssize_t hmc5843_show_measurement_configuration(struct device *dev,
 						struct device_attribute *attr,
 						char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct hmc5843_data *data = iio_priv(indio_dev);
 	return sprintf(buf, "%d\n", data->meas_conf);
 }
@@ -270,16 +350,20 @@ static ssize_t hmc5843_set_measurement_configuration(struct device *dev,
 						const char *buf,
 						size_t count)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
-	struct hmc5843_data *data = i2c_get_clientdata(client);
+	struct hmc5843_data *data = iio_priv(indio_dev);
 	unsigned long meas_conf = 0;
-	int error = strict_strtoul(buf, 10, &meas_conf);
+	int error;
+
+	error = kstrtoul(buf, 10, &meas_conf);
 	if (error)
 		return error;
-	mutex_lock(&data->lock);
+	if (meas_conf >= HMC5843_MEAS_CONF_NOT_USED)
+		return -EINVAL;
 
-	dev_dbg(dev, "set mode to %lu\n", meas_conf);
+	mutex_lock(&data->lock);
+	dev_dbg(dev, "set measurement configuration to %lu\n", meas_conf);
 	if (hmc5843_set_meas_conf(client, meas_conf)) {
 		count = -EINVAL;
 		goto exit;
@@ -290,71 +374,85 @@ exit:
 	mutex_unlock(&data->lock);
 	return count;
 }
+
 static IIO_DEVICE_ATTR(meas_conf,
 			S_IWUSR | S_IRUGO,
 			hmc5843_show_measurement_configuration,
 			hmc5843_set_measurement_configuration,
 			0);
 
-/*
- * From Datasheet
- * The table shows the minimum data output
- * Value	| Minimum data output rate(Hz)
- * 0		| 0.5
- * 1		| 1
- * 2		| 2
- * 3		| 5
- * 4		| 10 (default)
- * 5		| 20
- * 6		| 50
- * 7		| Not used
- */
-static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("0.5 1 2 5 10 20 50");
+static ssize_t hmc5843_show_sampling_frequencies_available(struct device *dev,
+						struct device_attribute *attr,
+						char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct hmc5843_data *data = iio_priv(indio_dev);
+	ssize_t total_n = 0;
+	int i;
+
+	for (i = 0; i < HMC5843_RATE_NOT_USED; i++) {
+		ssize_t n = sprintf(buf, "%s ", data->variant->regval_to_sample_freq[i]);
+		buf += n;
+		total_n += n;
+	}
+	/* replace trailing space by newline */
+	buf[-1] = '\n';
+
+	return total_n;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_sampling_frequencies_available);
 
 static s32 hmc5843_set_rate(struct i2c_client *client,
 				u8 rate)
 {
-	struct hmc5843_data *data = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct hmc5843_data *data = iio_priv(indio_dev);
 	u8 reg_val;
 
-	reg_val = (data->meas_conf) |  (rate << RATE_OFFSET);
-	if (rate >= RATE_NOT_USED) {
+	if (rate >= HMC5843_RATE_NOT_USED) {
 		dev_err(&client->dev,
-			"This data output rate is not supported\n");
+			"data output rate is not supported\n");
 		return -EINVAL;
 	}
+
+	reg_val = data->meas_conf | (rate << HMC5843_RATE_OFFSET);
 	return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val);
 }
 
-static ssize_t set_sampling_frequency(struct device *dev,
+static int hmc5843_check_sampling_frequency(struct hmc5843_data *data,
+						const char *buf)
+{
+	const char * const *samp_freq = data->variant->regval_to_sample_freq;
+	int i;
+
+	for (i = 0; i < HMC5843_RATE_NOT_USED; i++) {
+		if (sysfs_streq(buf, samp_freq[i]))
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t hmc5843_set_sampling_frequency(struct device *dev,
 					struct device_attribute *attr,
 					const char *buf, size_t count)
 {
 
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
 	struct hmc5843_data *data = iio_priv(indio_dev);
-	unsigned long rate = 0;
-
-	if (strncmp(buf, "0.5" , 3) == 0)
-		rate = RATE_5;
-	else if (strncmp(buf, "1" , 1) == 0)
-		rate = RATE_10;
-	else if (strncmp(buf, "2", 1) == 0)
-		rate = RATE_20;
-	else if (strncmp(buf, "5", 1) == 0)
-		rate = RATE_50;
-	else if (strncmp(buf, "10", 2) == 0)
-		rate = RATE_100;
-	else if (strncmp(buf, "20" , 2) == 0)
-		rate = RATE_200;
-	else if (strncmp(buf, "50" , 2) == 0)
-		rate = RATE_500;
-	else
-		return -EINVAL;
+	int rate;
+
+	rate = hmc5843_check_sampling_frequency(data, buf);
+	if (rate < 0) {
+		dev_err(&client->dev,
+			"sampling frequency is not supported\n");
+		return rate;
+	}
 
 	mutex_lock(&data->lock);
-	dev_dbg(dev, "set rate to %lu\n", rate);
+	dev_dbg(dev, "set rate to %d\n", rate);
 	if (hmc5843_set_rate(client, rate)) {
 		count = -EINVAL;
 		goto exit;
@@ -366,89 +464,79 @@ exit:
 	return count;
 }
 
-static ssize_t show_sampling_frequency(struct device *dev,
+static ssize_t hmc5843_show_sampling_frequency(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	struct hmc5843_data *data = iio_priv(indio_dev);
 	s32 rate;
 
-	rate = i2c_smbus_read_byte_data(client,  this_attr->address);
+	rate = i2c_smbus_read_byte_data(client, this_attr->address);
 	if (rate < 0)
 		return rate;
-	rate = (rate & RATE_BITMASK) >> RATE_OFFSET;
-	return sprintf(buf, "%s\n", regval_to_samp_freq[rate]);
+	rate = (rate & HMC5843_RATE_BITMASK) >> HMC5843_RATE_OFFSET;
+	return sprintf(buf, "%s\n", data->variant->regval_to_sample_freq[rate]);
 }
+
 static IIO_DEVICE_ATTR(sampling_frequency,
 			S_IWUSR | S_IRUGO,
-			show_sampling_frequency,
-			set_sampling_frequency,
+			hmc5843_show_sampling_frequency,
+			hmc5843_set_sampling_frequency,
 			HMC5843_CONFIG_REG_A);
 
-/*
- * From Datasheet
- *	Nominal gain settings
- * Value	| Sensor Input Field Range(Ga)	| Gain(counts/ milli-gauss)
- *0		|(+-)0.7			|1620
- *1		|(+-)1.0			|1300
- *2		|(+-)1.5			|970
- *3		|(+-)2.0			|780
- *4		|(+-)3.2			|530
- *5		|(+-)3.8			|460
- *6		|(+-)4.5			|390
- *7		|(+-)6.5			|280
- */
-static ssize_t show_range(struct device *dev,
+static ssize_t hmc5843_show_range_gain(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
 {
 	u8 range;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct hmc5843_data *data = iio_priv(indio_dev);
 
 	range = data->range;
-	return sprintf(buf, "%d\n", regval_to_input_field_mg[range]);
+	return sprintf(buf, "%d\n", data->variant->regval_to_input_field_mga[range]);
 }
 
-static ssize_t set_range(struct device *dev,
+static ssize_t hmc5843_set_range_gain(struct device *dev,
 			struct device_attribute *attr,
 			const char *buf,
 			size_t count)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	struct hmc5843_data *data = iio_priv(indio_dev);
 	unsigned long range = 0;
 	int error;
+
 	mutex_lock(&data->lock);
-	error = strict_strtoul(buf, 10, &range);
+	error = kstrtoul(buf, 10, &range);
 	if (error) {
 		count = error;
 		goto exit;
 	}
 	dev_dbg(dev, "set range to %lu\n", range);
 
-	if (range > RANGE_6_5) {
+	if (range > HMC5843_RANGE_GAIN_MAX) {
 		count = -EINVAL;
 		goto exit;
 	}
 
 	data->range = range;
-	range = range << RANGE_GAIN_OFFSET;
+	range = range << HMC5843_RANGE_GAIN_OFFSET;
 	if (i2c_smbus_write_byte_data(client, this_attr->address, range))
 		count = -EINVAL;
 
 exit:
 	mutex_unlock(&data->lock);
 	return count;
-
 }
+
 static IIO_DEVICE_ATTR(in_magn_range,
 			S_IWUSR | S_IRUGO,
-			show_range,
-			set_range,
+			hmc5843_show_range_gain,
+			hmc5843_set_range_gain,
 			HMC5843_CONFIG_REG_B);
 
 static int hmc5843_read_raw(struct iio_dev *indio_dev,
@@ -459,13 +547,13 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev,
 	struct hmc5843_data *data = iio_priv(indio_dev);
 
 	switch (mask) {
-	case 0:
+	case IIO_CHAN_INFO_RAW:
 		return hmc5843_read_measurement(indio_dev,
 						chan->address,
 						val);
 	case IIO_CHAN_INFO_SCALE:
 		*val = 0;
-		*val2 = hmc5843_regval_to_nanoscale[data->range];
+		*val2 = data->variant->regval_to_nanoscale[data->range];
 		return IIO_VAL_INT_PLUS_NANO;
 	};
 	return -EINVAL;
@@ -476,7 +564,8 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev,
 		.type = IIO_MAGN,					\
 		.modified = 1,						\
 		.channel2 = IIO_MOD_##axis,				\
-		.info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,		\
 		.address = add						\
 	}
 
@@ -486,12 +575,18 @@ static const struct iio_chan_spec hmc5843_channels[] = {
 	HMC5843_CHANNEL(Z, HMC5843_DATA_OUT_Z_MSB_REG),
 };
 
+static const struct iio_chan_spec hmc5883_channels[] = {
+	HMC5843_CHANNEL(X, HMC5843_DATA_OUT_X_MSB_REG),
+	HMC5843_CHANNEL(Y, HMC5883_DATA_OUT_Y_MSB_REG),
+	HMC5843_CHANNEL(Z, HMC5883_DATA_OUT_Z_MSB_REG),
+};
+
 static struct attribute *hmc5843_attributes[] = {
 	&iio_dev_attr_meas_conf.dev_attr.attr,
 	&iio_dev_attr_operating_mode.dev_attr.attr,
 	&iio_dev_attr_sampling_frequency.dev_attr.attr,
 	&iio_dev_attr_in_magn_range.dev_attr.attr,
-	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	NULL
 };
 
@@ -499,6 +594,33 @@ static const struct attribute_group hmc5843_group = {
 	.attrs = hmc5843_attributes,
 };
 
+static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = {
+	[HMC5843_ID] = {
+		.channels = hmc5843_channels,
+		.num_channels = ARRAY_SIZE(hmc5843_channels),
+		.regval_to_sample_freq = hmc5843_regval_to_sample_freq,
+		.regval_to_input_field_mga =
+			hmc5843_regval_to_input_field_mga,
+		.regval_to_nanoscale = hmc5843_regval_to_nanoscale,
+	},
+	[HMC5883_ID] = {
+		.channels = hmc5883_channels,
+		.num_channels = ARRAY_SIZE(hmc5883_channels),
+		.regval_to_sample_freq = hmc5883_regval_to_sample_freq,
+		.regval_to_input_field_mga =
+			hmc5883_regval_to_input_field_mga,
+		.regval_to_nanoscale = hmc5883_regval_to_nanoscale,
+	},
+	[HMC5883L_ID] = {
+		.channels = hmc5883_channels,
+		.num_channels = ARRAY_SIZE(hmc5883_channels),
+		.regval_to_sample_freq = hmc5883_regval_to_sample_freq,
+		.regval_to_input_field_mga =
+			hmc5883l_regval_to_input_field_mga,
+		.regval_to_nanoscale = hmc5883l_regval_to_nanoscale,
+	},
+};
+
 static int hmc5843_detect(struct i2c_client *client,
 			  struct i2c_board_info *info)
 {
@@ -518,18 +640,23 @@ static int hmc5843_detect(struct i2c_client *client,
 	return 0;
 }
 
-/* Called when we have found a new HMC5843. */
-static void hmc5843_init_client(struct i2c_client *client)
+/* Called when we have found a new HMC58X3 */
+static void hmc5843_init_client(struct i2c_client *client,
+				const struct i2c_device_id *id)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct hmc5843_data *data = iio_priv(indio_dev);
 
+	data->variant = &hmc5843_chip_info_tbl[id->driver_data];
+	indio_dev->channels = data->variant->channels;
+	indio_dev->num_channels = data->variant->num_channels;
 	hmc5843_set_meas_conf(client, data->meas_conf);
 	hmc5843_set_rate(client, data->rate);
 	hmc5843_configure(client, data->operating_mode);
 	i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_B, data->range);
 	mutex_init(&data->lock);
-	pr_info("HMC5843 initialized\n");
+
+	pr_info("%s initialized\n", id->name);
 }
 
 static const struct iio_info hmc5843_info = {
@@ -545,35 +672,34 @@ static int hmc5843_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	int err = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*data));
+	indio_dev = iio_device_alloc(sizeof(*data));
 	if (indio_dev == NULL) {
 		err = -ENOMEM;
 		goto exit;
 	}
-	data = iio_priv(indio_dev);
-	/* default settings at probe */
 
-	data->meas_conf = CONF_NORMAL;
-	data->range = RANGE_1_0;
-	data->operating_mode = MODE_CONVERSION_CONTINUOUS;
+	/* default settings at probe */
+	data = iio_priv(indio_dev);
+	data->meas_conf = HMC5843_MEAS_CONF_NORMAL;
+	data->range = HMC5843_RANGE_GAIN_DEFAULT;
+	data->operating_mode = HMC5843_MODE_CONVERSION_CONTINUOUS;
 
 	i2c_set_clientdata(client, indio_dev);
-
-	/* Initialize the HMC5843 chip */
-	hmc5843_init_client(client);
+	hmc5843_init_client(client, id);
 
 	indio_dev->info = &hmc5843_info;
 	indio_dev->name = id->name;
-	indio_dev->channels = hmc5843_channels;
-	indio_dev->num_channels = ARRAY_SIZE(hmc5843_channels);
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->modes = INDIO_DIRECT_MODE;
+
 	err = iio_device_register(indio_dev);
 	if (err)
 		goto exit_free2;
+
 	return 0;
+
 exit_free2:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 exit:
 	return err;
 }
@@ -584,8 +710,8 @@ static int hmc5843_remove(struct i2c_client *client)
 
 	iio_device_unregister(indio_dev);
 	 /*  sleep mode to save power */
-	hmc5843_configure(client, MODE_SLEEP);
-	iio_free_device(indio_dev);
+	hmc5843_configure(client, HMC5843_MODE_SLEEP);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
@@ -593,14 +719,18 @@ static int hmc5843_remove(struct i2c_client *client)
 #ifdef CONFIG_PM_SLEEP
 static int hmc5843_suspend(struct device *dev)
 {
-	hmc5843_configure(to_i2c_client(dev), MODE_SLEEP);
+	hmc5843_configure(to_i2c_client(dev), HMC5843_MODE_SLEEP);
 	return 0;
 }
 
 static int hmc5843_resume(struct device *dev)
 {
-	struct hmc5843_data *data = i2c_get_clientdata(to_i2c_client(dev));
-	hmc5843_configure(to_i2c_client(dev), data->operating_mode);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct hmc5843_data *data = iio_priv(indio_dev);
+
+	hmc5843_configure(client, data->operating_mode);
+
 	return 0;
 }
 
@@ -611,7 +741,9 @@ static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_suspend, hmc5843_resume);
 #endif
 
 static const struct i2c_device_id hmc5843_id[] = {
-	{ "hmc5843", 0 },
+	{ "hmc5843", HMC5843_ID },
+	{ "hmc5883", HMC5883_ID },
+	{ "hmc5883l", HMC5883L_ID },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, hmc5843_id);
@@ -630,5 +762,5 @@ static struct i2c_driver hmc5843_driver = {
 module_i2c_driver(hmc5843_driver);
 
 MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com");
-MODULE_DESCRIPTION("HMC5843 driver");
+MODULE_DESCRIPTION("HMC5843/5883/5883L driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c
index 57baac6c0d40..f04ece7fbc2f 100644
--- a/drivers/staging/iio/meter/ade7753.c
+++ b/drivers/staging/iio/meter/ade7753.c
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "meter.h"
 #include "ade7753.h"
 
@@ -28,7 +28,7 @@ static int ade7753_spi_write_reg_8(struct device *dev,
 				   u8 val)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7753_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -46,7 +46,7 @@ static int ade7753_spi_write_reg_16(struct device *dev,
 		u16 value)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7753_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -63,7 +63,7 @@ static int ade7753_spi_read_reg_8(struct device *dev,
 		u8 reg_address,
 		u8 *val)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7753_state *st = iio_priv(indio_dev);
 	ssize_t ret;
 
@@ -82,7 +82,7 @@ static int ade7753_spi_read_reg_16(struct device *dev,
 		u8 reg_address,
 		u16 *val)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7753_state *st = iio_priv(indio_dev);
 	ssize_t ret;
 
@@ -104,7 +104,7 @@ static int ade7753_spi_read_reg_24(struct device *dev,
 		u32 *val)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7753_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -416,7 +416,7 @@ static ssize_t ade7753_write_frequency(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7753_state *st = iio_priv(indio_dev);
 	unsigned long val;
 	int ret;
@@ -517,7 +517,7 @@ static int __devinit ade7753_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -546,7 +546,7 @@ static int __devinit ade7753_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -564,7 +564,7 @@ static int ade7753_remove(struct spi_device *spi)
 	if (ret)
 		goto err_ret;
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 err_ret:
 	return ret;
 }
diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c
index 8d81c92007e9..6cee28a5e877 100644
--- a/drivers/staging/iio/meter/ade7754.c
+++ b/drivers/staging/iio/meter/ade7754.c
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "meter.h"
 #include "ade7754.h"
 
@@ -28,7 +28,7 @@ static int ade7754_spi_write_reg_8(struct device *dev,
 		u8 val)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7754_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -46,7 +46,7 @@ static int ade7754_spi_write_reg_16(struct device *dev,
 		u16 value)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7754_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -63,7 +63,7 @@ static int ade7754_spi_read_reg_8(struct device *dev,
 		u8 reg_address,
 		u8 *val)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7754_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -82,7 +82,7 @@ static int ade7754_spi_read_reg_16(struct device *dev,
 		u8 reg_address,
 		u16 *val)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7754_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -104,7 +104,7 @@ static int ade7754_spi_read_reg_24(struct device *dev,
 		u32 *val)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7754_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -436,7 +436,7 @@ static ssize_t ade7754_write_frequency(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7754_state *st = iio_priv(indio_dev);
 	unsigned long val;
 	int ret;
@@ -540,7 +540,7 @@ static int __devinit ade7754_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -568,7 +568,7 @@ static int __devinit ade7754_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 error_ret:
 	return ret;
@@ -585,7 +585,7 @@ static int ade7754_remove(struct spi_device *spi)
 	if (ret)
 		goto err_ret;
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 err_ret:
 	return ret;
diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c
index dcb20294dfe8..96d6114a31aa 100644
--- a/drivers/staging/iio/meter/ade7758_core.c
+++ b/drivers/staging/iio/meter/ade7758_core.c
@@ -18,9 +18,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
-#include "../buffer.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
 #include "meter.h"
 #include "ade7758.h"
 
@@ -29,7 +29,7 @@ int ade7758_spi_write_reg_8(struct device *dev,
 		u8 val)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7758_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -48,7 +48,7 @@ static int ade7758_spi_write_reg_16(struct device *dev,
 {
 	int ret;
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7758_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfers[] = {
 		{
@@ -77,7 +77,7 @@ static int ade7758_spi_write_reg_24(struct device *dev,
 {
 	int ret;
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7758_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfers[] = {
 		{
@@ -106,7 +106,7 @@ int ade7758_spi_read_reg_8(struct device *dev,
 		u8 *val)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7758_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -149,7 +149,7 @@ static int ade7758_spi_read_reg_16(struct device *dev,
 		u16 *val)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7758_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -195,7 +195,7 @@ static int ade7758_spi_read_reg_24(struct device *dev,
 		u32 *val)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7758_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -534,7 +534,7 @@ static ssize_t ade7758_write_frequency(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	unsigned long val;
 	int ret;
 	u8 reg, t;
@@ -662,66 +662,217 @@ static const struct attribute_group ade7758_attribute_group = {
 };
 
 static struct iio_chan_spec ade7758_channels[] = {
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "raw", 0, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE),
-		0, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_CURRENT, 0, 1, 0, "raw", 0, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT),
-		1, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "apparent_raw", 0, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR),
-		2, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "active_raw", 0, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR),
-		3, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "reactive_raw", 0, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR),
-		4, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "raw", 1, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE),
-		5, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_CURRENT, 0, 1, 0, "raw", 1, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT),
-		6, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "apparent_raw", 1, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR),
-		7, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "active_raw", 1, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR),
-		8, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "reactive_raw", 1, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR),
-		9, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_VOLTAGE, 0, 1, 0, "raw", 2, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE),
-		10, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_CURRENT, 0, 1, 0, "raw", 2, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT),
-		11, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "apparent_raw", 2, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR),
-		12, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "active_raw", 2, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR),
-		13, IIO_ST('s', 24, 32, 0), 0),
-	IIO_CHAN(IIO_POWER, 0, 1, 0, "reactive_raw", 2, 0,
-		IIO_CHAN_INFO_SCALE_SHARED_BIT,
-		AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR),
-		14, IIO_ST('s', 24, 32, 0), 0),
+	{
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_CURRENT,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT),
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "apparent_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR),
+		.scan_index = 2,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "active_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR),
+		.scan_index = 3,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 0,
+		.extend_name = "reactive_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR),
+		.scan_index = 4,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE),
+		.scan_index = 5,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_CURRENT,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT),
+		.scan_index = 6,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "apparent_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR),
+		.scan_index = 7,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "active_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR),
+		.scan_index = 8,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 1,
+		.extend_name = "reactive_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR),
+		.scan_index = 9,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 2,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE),
+		.scan_index = 10,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_CURRENT,
+		.indexed = 1,
+		.channel = 2,
+		.extend_name = "raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT),
+		.scan_index = 11,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 2,
+		.extend_name = "apparent_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR),
+		.scan_index = 12,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 2,
+		.extend_name = "active_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR),
+		.scan_index = 13,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	}, {
+		.type = IIO_POWER,
+		.indexed = 1,
+		.channel = 2,
+		.extend_name = "reactive_raw",
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+			     IIO_CHAN_INFO_SCALE_SHARED_BIT,
+		.address = AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR),
+		.scan_index = 14,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 24,
+			.storagebits = 32,
+		},
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(15),
 };
 
@@ -734,7 +885,7 @@ static int __devinit ade7758_probe(struct spi_device *spi)
 {
 	int i, ret;
 	struct ade7758_state *st;
-	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	struct iio_dev *indio_dev = iio_device_alloc(sizeof(*st));
 
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
@@ -800,7 +951,7 @@ static int __devinit ade7758_probe(struct spi_device *spi)
 	return 0;
 
 error_remove_trigger:
-	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
+	if (spi->irq)
 		ade7758_remove_trigger(indio_dev);
 error_uninitialize_ring:
 	ade7758_uninitialize_ring(indio_dev);
@@ -811,7 +962,7 @@ error_free_tx:
 error_free_rx:
 	kfree(st->rx);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -833,7 +984,7 @@ static int ade7758_remove(struct spi_device *spi)
 	kfree(st->tx);
 	kfree(st->rx);
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 err_ret:
 	return ret;
diff --git a/drivers/staging/iio/meter/ade7758_ring.c b/drivers/staging/iio/meter/ade7758_ring.c
index c45b23bb1229..92159f208d14 100644
--- a/drivers/staging/iio/meter/ade7758_ring.c
+++ b/drivers/staging/iio/meter/ade7758_ring.c
@@ -12,18 +12,17 @@
 #include <linux/slab.h>
 #include <asm/unaligned.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "../ring_sw.h"
-#include "../trigger_consumer.h"
+#include <linux/iio/trigger_consumer.h>
 #include "ade7758.h"
 
 /**
  * ade7758_spi_read_burst() - read data registers
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @indio_dev: the IIO device
  **/
-static int ade7758_spi_read_burst(struct device *dev)
+static int ade7758_spi_read_burst(struct iio_dev *indio_dev)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ade7758_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -68,11 +67,11 @@ static irqreturn_t ade7758_trigger_handler(int irq, void *p)
 	u32 *dat32 = (u32 *)dat64;
 
 	if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
-		if (ade7758_spi_read_burst(&indio_dev->dev) >= 0)
+		if (ade7758_spi_read_burst(indio_dev) >= 0)
 			*dat32 = get_unaligned_be32(&st->rx_buf[5]) & 0xFFFFFF;
 
 	/* Guaranteed to be aligned with 8 byte boundary */
-	if (ring->scan_timestamp)
+	if (indio_dev->scan_timestamp)
 		dat64[1] = pf->timestamp;
 
 	ring->access->store_to(ring, (u8 *)dat64, pf->timestamp);
@@ -92,29 +91,19 @@ static irqreturn_t ade7758_trigger_handler(int irq, void *p)
 static int ade7758_ring_preenable(struct iio_dev *indio_dev)
 {
 	struct ade7758_state *st = iio_priv(indio_dev);
-	struct iio_buffer *ring = indio_dev->buffer;
-	size_t d_size;
 	unsigned channel;
+	int ret;
 
 	if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
 		return -EINVAL;
 
+	ret = iio_sw_buffer_preenable(indio_dev);
+	if (ret < 0)
+		return ret;
+
 	channel = find_first_bit(indio_dev->active_scan_mask,
 				 indio_dev->masklength);
 
-	d_size = st->ade7758_ring_channels[channel].scan_type.storagebits / 8;
-
-	if (ring->scan_timestamp) {
-		d_size += sizeof(s64);
-
-		if (d_size % sizeof(s64))
-			d_size += sizeof(s64) - (d_size % sizeof(s64));
-	}
-
-	if (indio_dev->buffer->access->set_bytes_per_datum)
-		indio_dev->buffer->access->
-			set_bytes_per_datum(indio_dev->buffer, d_size);
-
 	ade7758_write_waveform_type(&indio_dev->dev,
 		st->ade7758_ring_channels[channel].address);
 
diff --git a/drivers/staging/iio/meter/ade7758_trigger.c b/drivers/staging/iio/meter/ade7758_trigger.c
index b6569c706651..f9c6a340092b 100644
--- a/drivers/staging/iio/meter/ade7758_trigger.c
+++ b/drivers/staging/iio/meter/ade7758_trigger.c
@@ -11,8 +11,8 @@
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 #include "ade7758.h"
 
 /**
@@ -63,7 +63,7 @@ int ade7758_probe_trigger(struct iio_dev *indio_dev)
 	struct ade7758_state *st = iio_priv(indio_dev);
 	int ret;
 
-	st->trig = iio_allocate_trigger("%s-dev%d",
+	st->trig = iio_trigger_alloc("%s-dev%d",
 					spi_get_device_id(st->us)->name,
 					indio_dev->id);
 	if (st->trig == NULL) {
@@ -94,7 +94,7 @@ int ade7758_probe_trigger(struct iio_dev *indio_dev)
 error_free_irq:
 	free_irq(st->us->irq, st->trig);
 error_free_trig:
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 error_ret:
 	return ret;
 }
@@ -105,5 +105,5 @@ void ade7758_remove_trigger(struct iio_dev *indio_dev)
 
 	iio_trigger_unregister(st->trig);
 	free_irq(st->us->irq, st->trig);
-	iio_free_trigger(st->trig);
+	iio_trigger_free(st->trig);
 }
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index 0beab478dcd9..b3f7e0fa9612 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "meter.h"
 #include "ade7759.h"
 
@@ -28,7 +28,7 @@ static int ade7759_spi_write_reg_8(struct device *dev,
 		u8 val)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7759_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -46,7 +46,7 @@ static int ade7759_spi_write_reg_16(struct device *dev,
 		u16 value)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7759_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -63,7 +63,7 @@ static int ade7759_spi_read_reg_8(struct device *dev,
 		u8 reg_address,
 		u8 *val)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7759_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -82,7 +82,7 @@ static int ade7759_spi_read_reg_16(struct device *dev,
 		u8 reg_address,
 		u16 *val)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7759_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -104,7 +104,7 @@ static int ade7759_spi_read_reg_40(struct device *dev,
 		u64 *val)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7759_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -376,7 +376,7 @@ static ssize_t ade7759_write_frequency(struct device *dev,
 		const char *buf,
 		size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7759_state *st = iio_priv(indio_dev);
 	unsigned long val;
 	int ret;
@@ -463,7 +463,7 @@ static int __devinit ade7759_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 
 	/* setup the industrialio driver allocated elements */
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -491,7 +491,7 @@ static int __devinit ade7759_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -507,7 +507,7 @@ static int ade7759_remove(struct spi_device *spi)
 	if (ret)
 		goto err_ret;
 
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 err_ret:
 	return ret;
diff --git a/drivers/staging/iio/meter/ade7854-i2c.c b/drivers/staging/iio/meter/ade7854-i2c.c
index 1e1faa0479d3..06090465fa5f 100644
--- a/drivers/staging/iio/meter/ade7854-i2c.c
+++ b/drivers/staging/iio/meter/ade7854-i2c.c
@@ -12,7 +12,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "ade7854.h"
 
 static int ade7854_i2c_write_reg_8(struct device *dev,
@@ -20,7 +20,7 @@ static int ade7854_i2c_write_reg_8(struct device *dev,
 		u8 value)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -39,7 +39,7 @@ static int ade7854_i2c_write_reg_16(struct device *dev,
 		u16 value)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -59,7 +59,7 @@ static int ade7854_i2c_write_reg_24(struct device *dev,
 		u32 value)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -80,7 +80,7 @@ static int ade7854_i2c_write_reg_32(struct device *dev,
 		u32 value)
 {
 	int ret;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	mutex_lock(&st->buf_lock);
@@ -101,7 +101,7 @@ static int ade7854_i2c_read_reg_8(struct device *dev,
 		u16 reg_address,
 		u8 *val)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -127,7 +127,7 @@ static int ade7854_i2c_read_reg_16(struct device *dev,
 		u16 reg_address,
 		u16 *val)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -153,7 +153,7 @@ static int ade7854_i2c_read_reg_24(struct device *dev,
 		u16 reg_address,
 		u32 *val)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -179,7 +179,7 @@ static int ade7854_i2c_read_reg_32(struct device *dev,
 		u16 reg_address,
 		u32 *val)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	int ret;
 
@@ -208,7 +208,7 @@ static int __devinit ade7854_i2c_probe(struct i2c_client *client,
 	struct ade7854_state *st;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 	st = iio_priv(indio_dev);
@@ -226,7 +226,7 @@ static int __devinit ade7854_i2c_probe(struct i2c_client *client,
 
 	ret = ade7854_probe(indio_dev, &client->dev);
 	if (ret)
-		iio_free_device(indio_dev);
+		iio_device_free(indio_dev);
 
 	return ret;
 }
diff --git a/drivers/staging/iio/meter/ade7854-spi.c b/drivers/staging/iio/meter/ade7854-spi.c
index 81121862c1bd..9fb2f8bfca81 100644
--- a/drivers/staging/iio/meter/ade7854-spi.c
+++ b/drivers/staging/iio/meter/ade7854-spi.c
@@ -12,7 +12,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 
-#include "../iio.h"
+#include <linux/iio/iio.h>
 #include "ade7854.h"
 
 static int ade7854_spi_write_reg_8(struct device *dev,
@@ -21,7 +21,7 @@ static int ade7854_spi_write_reg_8(struct device *dev,
 {
 	int ret;
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfer = {
 		.tx_buf = st->tx,
@@ -49,7 +49,7 @@ static int ade7854_spi_write_reg_16(struct device *dev,
 {
 	int ret;
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfer = {
 		.tx_buf = st->tx,
@@ -78,7 +78,7 @@ static int ade7854_spi_write_reg_24(struct device *dev,
 {
 	int ret;
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfer = {
 		.tx_buf = st->tx,
@@ -108,7 +108,7 @@ static int ade7854_spi_write_reg_32(struct device *dev,
 {
 	int ret;
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	struct spi_transfer xfer = {
 		.tx_buf = st->tx,
@@ -138,7 +138,7 @@ static int ade7854_spi_read_reg_8(struct device *dev,
 		u8 *val)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -180,7 +180,7 @@ static int ade7854_spi_read_reg_16(struct device *dev,
 		u16 *val)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -221,7 +221,7 @@ static int ade7854_spi_read_reg_24(struct device *dev,
 		u32 *val)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -263,7 +263,7 @@ static int ade7854_spi_read_reg_32(struct device *dev,
 		u32 *val)
 {
 	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	int ret;
 	struct spi_transfer xfers[] = {
@@ -306,7 +306,7 @@ static int __devinit ade7854_spi_probe(struct spi_device *spi)
 	struct ade7854_state *st;
 	struct iio_dev *indio_dev;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL)
 		return -ENOMEM;
 	st = iio_priv(indio_dev);
@@ -325,7 +325,7 @@ static int __devinit ade7854_spi_probe(struct spi_device *spi)
 
 	ret = ade7854_probe(indio_dev, &spi->dev);
 	if (ret)
-		iio_free_device(indio_dev);
+		iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
index 49c01c5c1b59..c642da84842a 100644
--- a/drivers/staging/iio/meter/ade7854.c
+++ b/drivers/staging/iio/meter/ade7854.c
@@ -17,8 +17,8 @@
 #include <linux/list.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "meter.h"
 #include "ade7854.h"
 
@@ -28,7 +28,7 @@ static ssize_t ade7854_read_8bit(struct device *dev,
 {
 	int ret;
 	u8 val = 0;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -45,7 +45,7 @@ static ssize_t ade7854_read_16bit(struct device *dev,
 {
 	int ret;
 	u16 val = 0;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -62,7 +62,7 @@ static ssize_t ade7854_read_24bit(struct device *dev,
 {
 	int ret;
 	u32 val;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 
@@ -80,7 +80,7 @@ static ssize_t ade7854_read_32bit(struct device *dev,
 	int ret;
 	u32 val = 0;
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	ret = st->read_reg_32(dev, this_attr->address, &val);
@@ -96,7 +96,7 @@ static ssize_t ade7854_write_8bit(struct device *dev,
 		size_t len)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	int ret;
@@ -117,7 +117,7 @@ static ssize_t ade7854_write_16bit(struct device *dev,
 		size_t len)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	int ret;
@@ -138,7 +138,7 @@ static ssize_t ade7854_write_24bit(struct device *dev,
 		size_t len)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	int ret;
@@ -159,7 +159,7 @@ static ssize_t ade7854_write_32bit(struct device *dev,
 		size_t len)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	int ret;
@@ -176,7 +176,7 @@ error_ret:
 
 static int ade7854_reset(struct device *dev)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 	u16 val;
 
@@ -425,7 +425,7 @@ static IIO_DEV_ATTR_CVAHR(ade7854_read_32bit,
 
 static int ade7854_set_irq(struct device *dev, bool enable)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ade7854_state *st = iio_priv(indio_dev);
 
 	int ret;
@@ -581,7 +581,7 @@ int ade7854_probe(struct iio_dev *indio_dev, struct device *dev)
 error_unreg_dev:
 	iio_device_unregister(indio_dev);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return ret;
 }
@@ -590,7 +590,7 @@ EXPORT_SYMBOL(ade7854_probe);
 int ade7854_remove(struct iio_dev *indio_dev)
 {
 	iio_device_unregister(indio_dev);
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/meter/meter.h b/drivers/staging/iio/meter/meter.h
index 6a3db1423631..23e1b5f480a9 100644
--- a/drivers/staging/iio/meter/meter.h
+++ b/drivers/staging/iio/meter/meter.h
@@ -1,4 +1,4 @@
-#include "../sysfs.h"
+#include <linux/iio/sysfs.h>
 
 /* metering ic types of attribute */
 
diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c
index d8ce854c1897..8b71eb0e16f5 100644
--- a/drivers/staging/iio/resolver/ad2s1200.c
+++ b/drivers/staging/iio/resolver/ad2s1200.c
@@ -19,8 +19,8 @@
 #include <linux/gpio.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 #define DRV_NAME "ad2s1200"
 
@@ -85,10 +85,12 @@ static const struct iio_chan_spec ad2s1200_channels[] = {
 		.type = IIO_ANGL,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 	}, {
 		.type = IIO_ANGL_VEL,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 	}
 };
 
@@ -110,7 +112,7 @@ static int __devinit ad2s1200_probe(struct spi_device *spi)
 						DRV_NAME, pins[pn]);
 			goto error_ret;
 		}
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -140,7 +142,7 @@ static int __devinit ad2s1200_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	for (--pn; pn >= 0; pn--)
 		gpio_free(pins[pn]);
@@ -150,7 +152,7 @@ error_ret:
 static int __devexit ad2s1200_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index c439fcf72be7..f313859476c1 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -18,8 +18,8 @@
 #include <linux/gpio.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 #include "ad2s1210.h"
 
 #define DRV_NAME "ad2s1210"
@@ -200,7 +200,7 @@ static ssize_t ad2s1210_store_softreset(struct device *dev,
 					const char *buf,
 					size_t len)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	int ret;
 
 	mutex_lock(&st->lock);
@@ -214,7 +214,7 @@ static ssize_t ad2s1210_show_fclkin(struct device *dev,
 				    struct device_attribute *attr,
 				    char *buf)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	return sprintf(buf, "%d\n", st->fclkin);
 }
 
@@ -223,7 +223,7 @@ static ssize_t ad2s1210_store_fclkin(struct device *dev,
 				     const char *buf,
 				     size_t len)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	unsigned long fclkin;
 	int ret;
 
@@ -252,7 +252,7 @@ static ssize_t ad2s1210_show_fexcit(struct device *dev,
 				    struct device_attribute *attr,
 				    char *buf)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	return sprintf(buf, "%d\n", st->fexcit);
 }
 
@@ -260,7 +260,7 @@ static ssize_t ad2s1210_store_fexcit(struct device *dev,
 				     struct device_attribute *attr,
 				     const char *buf, size_t len)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	unsigned long fexcit;
 	int ret;
 
@@ -287,7 +287,7 @@ static ssize_t ad2s1210_show_control(struct device *dev,
 				     struct device_attribute *attr,
 				     char *buf)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	int ret;
 	mutex_lock(&st->lock);
 	ret = ad2s1210_config_read(st, AD2S1210_REG_CONTROL);
@@ -299,7 +299,7 @@ static ssize_t ad2s1210_store_control(struct device *dev,
 			struct device_attribute *attr,
 			const char *buf, size_t len)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	unsigned long udata;
 	unsigned char data;
 	int ret;
@@ -345,7 +345,7 @@ error_ret:
 static ssize_t ad2s1210_show_resolution(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	return sprintf(buf, "%d\n", st->resolution);
 }
 
@@ -353,7 +353,7 @@ static ssize_t ad2s1210_store_resolution(struct device *dev,
 			struct device_attribute *attr,
 			const char *buf, size_t len)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	unsigned char data;
 	unsigned long udata;
 	int ret;
@@ -403,7 +403,7 @@ error_ret:
 static ssize_t ad2s1210_show_fault(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	int ret;
 
 	mutex_lock(&st->lock);
@@ -418,7 +418,7 @@ static ssize_t ad2s1210_clear_fault(struct device *dev,
 				    const char *buf,
 				    size_t len)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	int ret;
 
 	mutex_lock(&st->lock);
@@ -441,7 +441,7 @@ static ssize_t ad2s1210_show_reg(struct device *dev,
 				 struct device_attribute *attr,
 				 char *buf)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	struct iio_dev_attr *iattr = to_iio_dev_attr(attr);
 	int ret;
 
@@ -455,7 +455,7 @@ static ssize_t ad2s1210_show_reg(struct device *dev,
 static ssize_t ad2s1210_store_reg(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t len)
 {
-	struct ad2s1210_state *st = iio_priv(dev_get_drvdata(dev));
+	struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
 	unsigned long data;
 	int ret;
 	struct iio_dev_attr *iattr = to_iio_dev_attr(attr);
@@ -580,10 +580,12 @@ static struct iio_chan_spec ad2s1210_channels[] = {
 		.type = IIO_ANGL,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 	}, {
 		.type = IIO_ANGL_VEL,
 		.indexed = 1,
 		.channel = 0,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 	}
 };
 
@@ -688,7 +690,7 @@ static int __devinit ad2s1210_probe(struct spi_device *spi)
 	if (spi->dev.platform_data == NULL)
 		return -EINVAL;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -729,7 +731,7 @@ static int __devinit ad2s1210_probe(struct spi_device *spi)
 error_free_gpios:
 	ad2s1210_free_gpios(st);
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -740,7 +742,7 @@ static int __devexit ad2s1210_remove(struct spi_device *spi)
 
 	iio_device_unregister(indio_dev);
 	ad2s1210_free_gpios(iio_priv(indio_dev));
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/staging/iio/resolver/ad2s90.c b/drivers/staging/iio/resolver/ad2s90.c
index 2a86f582ddf1..a8057228dca1 100644
--- a/drivers/staging/iio/resolver/ad2s90.c
+++ b/drivers/staging/iio/resolver/ad2s90.c
@@ -16,8 +16,8 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 
-#include "../iio.h"
-#include "../sysfs.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
 
 struct ad2s90_state {
 	struct mutex lock;
@@ -55,6 +55,7 @@ static const struct iio_chan_spec ad2s90_chan = {
 	.type = IIO_ANGL,
 	.indexed = 1,
 	.channel = 0,
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
 };
 
 static int __devinit ad2s90_probe(struct spi_device *spi)
@@ -63,7 +64,7 @@ static int __devinit ad2s90_probe(struct spi_device *spi)
 	struct ad2s90_state *st;
 	int ret = 0;
 
-	indio_dev = iio_allocate_device(sizeof(*st));
+	indio_dev = iio_device_alloc(sizeof(*st));
 	if (indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_ret;
@@ -92,7 +93,7 @@ static int __devinit ad2s90_probe(struct spi_device *spi)
 	return 0;
 
 error_free_dev:
-	iio_free_device(indio_dev);
+	iio_device_free(indio_dev);
 error_ret:
 	return ret;
 }
@@ -100,7 +101,7 @@ error_ret:
 static int __devexit ad2s90_remove(struct spi_device *spi)
 {
 	iio_device_unregister(spi_get_drvdata(spi));
-	iio_free_device(spi_get_drvdata(spi));
+	iio_device_free(spi_get_drvdata(spi));
 
 	return 0;
 }
diff --git a/drivers/staging/iio/ring_sw.c b/drivers/staging/iio/ring_sw.c
index b9945ec44faa..9358c6cb1c72 100644
--- a/drivers/staging/iio/ring_sw.c
+++ b/drivers/staging/iio/ring_sw.c
@@ -15,7 +15,7 @@
 #include <linux/sched.h>
 #include <linux/poll.h>
 #include "ring_sw.h"
-#include "trigger.h"
+#include <linux/iio/trigger.h>
 
 /**
  * struct iio_sw_ring_buffer - software ring buffer
diff --git a/drivers/staging/iio/ring_sw.h b/drivers/staging/iio/ring_sw.h
index 7556e2122367..a5857aa7aefa 100644
--- a/drivers/staging/iio/ring_sw.h
+++ b/drivers/staging/iio/ring_sw.h
@@ -23,7 +23,7 @@
 
 #ifndef _IIO_RING_SW_H_
 #define _IIO_RING_SW_H_
-#include "buffer.h"
+#include <linux/iio/buffer.h>
 
 struct iio_buffer *iio_sw_rb_allocate(struct iio_dev *indio_dev);
 void iio_sw_rb_free(struct iio_buffer *ring);
diff --git a/drivers/staging/iio/sysfs.h b/drivers/staging/iio/sysfs.h
deleted file mode 100644
index bfedb73b850e..000000000000
--- a/drivers/staging/iio/sysfs.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/* The industrial I/O core
- *
- *Copyright (c) 2008 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * General attributes
- */
-
-#ifndef _INDUSTRIAL_IO_SYSFS_H_
-#define _INDUSTRIAL_IO_SYSFS_H_
-
-struct iio_chan_spec;
-
-/**
- * struct iio_dev_attr - iio specific device attribute
- * @dev_attr:	underlying device attribute
- * @address:	associated register address
- * @l:		list head for maintaining list of dynamically created attrs.
- */
-struct iio_dev_attr {
-	struct device_attribute dev_attr;
-	u64 address;
-	struct list_head l;
-	struct iio_chan_spec const *c;
-};
-
-#define to_iio_dev_attr(_dev_attr)				\
-	container_of(_dev_attr, struct iio_dev_attr, dev_attr)
-
-ssize_t iio_read_const_attr(struct device *dev,
-			    struct device_attribute *attr,
-			    char *len);
-
-/**
- * struct iio_const_attr - constant device specific attribute
- *                         often used for things like available modes
- * @string:	attribute string
- * @dev_attr:	underlying device attribute
- */
-struct iio_const_attr {
-	const char *string;
-	struct device_attribute dev_attr;
-};
-
-#define to_iio_const_attr(_dev_attr) \
-	container_of(_dev_attr, struct iio_const_attr, dev_attr)
-
-/* Some attributes will be hard coded (device dependent) and not require an
-   address, in these cases pass a negative */
-#define IIO_ATTR(_name, _mode, _show, _store, _addr)		\
-	{ .dev_attr = __ATTR(_name, _mode, _show, _store),	\
-	  .address = _addr }
-
-#define IIO_DEVICE_ATTR(_name, _mode, _show, _store, _addr)	\
-	struct iio_dev_attr iio_dev_attr_##_name		\
-	= IIO_ATTR(_name, _mode, _show, _store, _addr)
-
-#define IIO_DEVICE_ATTR_NAMED(_vname, _name, _mode, _show, _store, _addr) \
-	struct iio_dev_attr iio_dev_attr_##_vname			\
-	= IIO_ATTR(_name, _mode, _show, _store, _addr)
-
-#define IIO_CONST_ATTR(_name, _string)					\
-	struct iio_const_attr iio_const_attr_##_name			\
-	= { .string = _string,						\
-	    .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)}
-
-#define IIO_CONST_ATTR_NAMED(_vname, _name, _string)			\
-	struct iio_const_attr iio_const_attr_##_vname			\
-	= { .string = _string,						\
-	    .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)}
-
-/* Generic attributes of onetype or another */
-/**
- * IIO_DEV_ATTR_RESET: resets the device
- **/
-#define IIO_DEV_ATTR_RESET(_store)			\
-	IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, _store, 0)
-
-/**
- * IIO_DEV_ATTR_SAMP_FREQ - sets any internal clock frequency
- * @_mode: sysfs file mode/permissions
- * @_show: output method for the attribute
- * @_store: input method for the attribute
- **/
-#define IIO_DEV_ATTR_SAMP_FREQ(_mode, _show, _store)			\
-	IIO_DEVICE_ATTR(sampling_frequency, _mode, _show, _store, 0)
-
-/**
- * IIO_DEV_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies
- * @_show: output method for the attribute
- *
- * May be mode dependent on some devices
- **/
-#define IIO_DEV_ATTR_SAMP_FREQ_AVAIL(_show)				\
-	IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO, _show, NULL, 0)
-/**
- * IIO_CONST_ATTR_AVAIL_SAMP_FREQ - list available sampling frequencies
- * @_string: frequency string for the attribute
- *
- * Constant version
- **/
-#define IIO_CONST_ATTR_SAMP_FREQ_AVAIL(_string)			\
-	IIO_CONST_ATTR(sampling_frequency_available, _string)
-
-#define IIO_DEV_ATTR_TEMP_RAW(_show)			\
-	IIO_DEVICE_ATTR(in_temp_raw, S_IRUGO, _show, NULL, 0)
-
-#define IIO_CONST_ATTR_TEMP_OFFSET(_string)		\
-	IIO_CONST_ATTR(in_temp_offset, _string)
-
-#define IIO_CONST_ATTR_TEMP_SCALE(_string)		\
-	IIO_CONST_ATTR(in_temp_scale, _string)
-
-#endif /* _INDUSTRIAL_IO_SYSFS_H_ */
diff --git a/drivers/staging/iio/trigger.h b/drivers/staging/iio/trigger.h
deleted file mode 100644
index 1cfca231db8f..000000000000
--- a/drivers/staging/iio/trigger.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/* The industrial I/O core, trigger handling functions
- *
- * Copyright (c) 2008 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/irq.h>
-#include <linux/module.h>
-
-#ifndef _IIO_TRIGGER_H_
-#define _IIO_TRIGGER_H_
-
-struct iio_subirq {
-	bool enabled;
-};
-
-/**
- * struct iio_trigger_ops - operations structure for an iio_trigger.
- * @owner:		used to monitor usage count of the trigger.
- * @set_trigger_state:	switch on/off the trigger on demand
- * @try_reenable:	function to reenable the trigger when the
- *			use count is zero (may be NULL)
- * @validate_device:	function to validate the device when the
- *			current trigger gets changed.
- *
- * This is typically static const within a driver and shared by
- * instances of a given device.
- **/
-struct iio_trigger_ops {
-	struct module			*owner;
-	int (*set_trigger_state)(struct iio_trigger *trig, bool state);
-	int (*try_reenable)(struct iio_trigger *trig);
-	int (*validate_device)(struct iio_trigger *trig,
-			       struct iio_dev *indio_dev);
-};
-
-
-/**
- * struct iio_trigger - industrial I/O trigger device
- *
- * @id:			[INTERN] unique id number
- * @name:		[DRIVER] unique name
- * @dev:		[DRIVER] associated device (if relevant)
- * @private_data:	[DRIVER] device specific data
- * @list:		[INTERN] used in maintenance of global trigger list
- * @alloc_list:		[DRIVER] used for driver specific trigger list
- * @use_count:		use count for the trigger
- * @subirq_chip:	[INTERN] associate 'virtual' irq chip.
- * @subirq_base:	[INTERN] base number for irqs provided by trigger.
- * @subirqs:		[INTERN] information about the 'child' irqs.
- * @pool:		[INTERN] bitmap of irqs currently in use.
- * @pool_lock:		[INTERN] protection of the irq pool.
- **/
-struct iio_trigger {
-	const struct iio_trigger_ops	*ops;
-	int				id;
-	const char			*name;
-	struct device			dev;
-
-	void				*private_data;
-	struct list_head		list;
-	struct list_head		alloc_list;
-	int use_count;
-
-	struct irq_chip			subirq_chip;
-	int				subirq_base;
-
-	struct iio_subirq subirqs[CONFIG_IIO_CONSUMERS_PER_TRIGGER];
-	unsigned long pool[BITS_TO_LONGS(CONFIG_IIO_CONSUMERS_PER_TRIGGER)];
-	struct mutex			pool_lock;
-};
-
-
-static inline struct iio_trigger *to_iio_trigger(struct device *d)
-{
-	return container_of(d, struct iio_trigger, dev);
-};
-
-static inline void iio_put_trigger(struct iio_trigger *trig)
-{
-	module_put(trig->ops->owner);
-	put_device(&trig->dev);
-};
-
-static inline void iio_get_trigger(struct iio_trigger *trig)
-{
-	get_device(&trig->dev);
-	__module_get(trig->ops->owner);
-};
-
-/**
- * iio_trigger_register() - register a trigger with the IIO core
- * @trig_info:	trigger to be registered
- **/
-int iio_trigger_register(struct iio_trigger *trig_info);
-
-/**
- * iio_trigger_unregister() - unregister a trigger from the core
- * @trig_info:	trigger to be unregistered
- **/
-void iio_trigger_unregister(struct iio_trigger *trig_info);
-
-/**
- * iio_trigger_poll() - called on a trigger occurring
- * @trig: trigger which occurred
- *
- * Typically called in relevant hardware interrupt handler.
- **/
-void iio_trigger_poll(struct iio_trigger *trig, s64 time);
-void iio_trigger_poll_chained(struct iio_trigger *trig, s64 time);
-
-irqreturn_t iio_trigger_generic_data_rdy_poll(int irq, void *private);
-
-__printf(1, 2) struct iio_trigger *iio_allocate_trigger(const char *fmt, ...);
-void iio_free_trigger(struct iio_trigger *trig);
-
-#endif /* _IIO_TRIGGER_H_ */
diff --git a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
index 665653d79f02..f85734d212bb 100644
--- a/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
+++ b/drivers/staging/iio/trigger/iio-trig-bfin-timer.c
@@ -15,8 +15,8 @@
 
 #include <asm/gptimers.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 
 struct bfin_timer {
 	unsigned short id, bit;
@@ -172,7 +172,7 @@ static int __devinit iio_bfin_tmr_trigger_probe(struct platform_device *pdev)
 	st->timer_num = ret;
 	st->t = &iio_bfin_timer_code[st->timer_num];
 
-	st->trig = iio_allocate_trigger("bfintmr%d", st->timer_num);
+	st->trig = iio_trigger_alloc("bfintmr%d", st->timer_num);
 	if (!st->trig) {
 		ret = -ENOMEM;
 		goto out1;
@@ -203,7 +203,7 @@ static int __devinit iio_bfin_tmr_trigger_probe(struct platform_device *pdev)
 out4:
 	iio_trigger_unregister(st->trig);
 out2:
-	iio_put_trigger(st->trig);
+	iio_trigger_put(st->trig);
 out1:
 	kfree(st);
 out:
@@ -217,7 +217,7 @@ static int __devexit iio_bfin_tmr_trigger_remove(struct platform_device *pdev)
 	disable_gptimers(st->t->bit);
 	free_irq(st->irq, st);
 	iio_trigger_unregister(st->trig);
-	iio_put_trigger(st->trig);
+	iio_trigger_put(st->trig);
 	kfree(st);
 
 	return 0;
diff --git a/drivers/staging/iio/trigger/iio-trig-gpio.c b/drivers/staging/iio/trigger/iio-trig-gpio.c
index a3465947235e..90b26846fc6b 100644
--- a/drivers/staging/iio/trigger/iio-trig-gpio.c
+++ b/drivers/staging/iio/trigger/iio-trig-gpio.c
@@ -22,8 +22,8 @@
 #include <linux/gpio.h>
 #include <linux/slab.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 
 static LIST_HEAD(iio_gpio_trigger_list);
 static DEFINE_MUTEX(iio_gpio_trigger_list_lock);
@@ -72,7 +72,7 @@ static int iio_gpio_trigger_probe(struct platform_device *pdev)
 
 		for (irq = irq_res->start; irq <= irq_res->end; irq++) {
 
-			trig = iio_allocate_trigger("irqtrig%d", irq);
+			trig = iio_trigger_alloc("irqtrig%d", irq);
 			if (!trig) {
 				ret = -ENOMEM;
 				goto error_free_completed_registrations;
@@ -114,7 +114,7 @@ error_release_irq:
 error_free_trig_info:
 	kfree(trig_info);
 error_put_trigger:
-	iio_put_trigger(trig);
+	iio_trigger_put(trig);
 error_free_completed_registrations:
 	/* The rest should have been added to the iio_gpio_trigger_list */
 	list_for_each_entry_safe(trig,
@@ -144,7 +144,7 @@ static int iio_gpio_trigger_remove(struct platform_device *pdev)
 		iio_trigger_unregister(trig);
 		free_irq(trig_info->irq, trig);
 		kfree(trig_info);
-		iio_put_trigger(trig);
+		iio_trigger_put(trig);
 	}
 	mutex_unlock(&iio_gpio_trigger_list_lock);
 
diff --git a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
index a80cf67bf84d..9f2d055524a3 100644
--- a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
+++ b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
@@ -16,8 +16,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/rtc.h>
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 
 static LIST_HEAD(iio_prtc_trigger_list);
 static DEFINE_MUTEX(iio_prtc_trigger_list_lock);
@@ -112,7 +112,7 @@ static int iio_trig_periodic_rtc_probe(struct platform_device *dev)
 	for (i = 0;; i++) {
 		if (pdata[i] == NULL)
 			break;
-		trig = iio_allocate_trigger("periodic%s", pdata[i]);
+		trig = iio_trigger_alloc("periodic%s", pdata[i]);
 		if (!trig) {
 			ret = -ENOMEM;
 			goto error_free_completed_registrations;
@@ -152,7 +152,7 @@ error_free_trig_info:
 	kfree(trig_info);
 error_put_trigger_and_remove_from_list:
 	list_del(&trig->alloc_list);
-	iio_put_trigger(trig);
+	iio_trigger_put(trig);
 error_free_completed_registrations:
 	list_for_each_entry_safe(trig,
 				 trig2,
diff --git a/drivers/staging/iio/trigger/iio-trig-sysfs.c b/drivers/staging/iio/trigger/iio-trig-sysfs.c
index 174dc65709d5..552763bb3d4c 100644
--- a/drivers/staging/iio/trigger/iio-trig-sysfs.c
+++ b/drivers/staging/iio/trigger/iio-trig-sysfs.c
@@ -11,8 +11,8 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 
-#include "../iio.h"
-#include "../trigger.h"
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 
 struct iio_sysfs_trig {
 	struct iio_trigger *trig;
@@ -139,7 +139,7 @@ static int iio_sysfs_trigger_probe(int id)
 		goto out1;
 	}
 	t->id = id;
-	t->trig = iio_allocate_trigger("sysfstrig%d", id);
+	t->trig = iio_trigger_alloc("sysfstrig%d", id);
 	if (!t->trig) {
 		ret = -ENOMEM;
 		goto free_t;
@@ -158,7 +158,7 @@ static int iio_sysfs_trigger_probe(int id)
 	return 0;
 
 out2:
-	iio_put_trigger(t->trig);
+	iio_trigger_put(t->trig);
 free_t:
 	kfree(t);
 out1:
@@ -182,7 +182,7 @@ static int iio_sysfs_trigger_remove(int id)
 	}
 
 	iio_trigger_unregister(t->trig);
-	iio_free_trigger(t->trig);
+	iio_trigger_free(t->trig);
 
 	list_del(&t->l);
 	kfree(t);
diff --git a/drivers/staging/iio/trigger_consumer.h b/drivers/staging/iio/trigger_consumer.h
deleted file mode 100644
index 60d64b356945..000000000000
--- a/drivers/staging/iio/trigger_consumer.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* The industrial I/O core, trigger consumer functions
- *
- * Copyright (c) 2008-2011 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-/**
- * struct iio_poll_func - poll function pair
- *
- * @indio_dev:			data specific to device (passed into poll func)
- * @h:				the function that is actually run on trigger
- * @thread:			threaded interrupt part
- * @type:			the type of interrupt (basically if oneshot)
- * @name:			name used to identify the trigger consumer.
- * @irq:			the corresponding irq as allocated from the
- *				trigger pool
- * @timestamp:			some devices need a timestamp grabbed as soon
- *				as possible after the trigger - hence handler
- *				passes it via here.
- **/
-struct iio_poll_func {
-	struct iio_dev *indio_dev;
-	irqreturn_t (*h)(int irq, void *p);
-	irqreturn_t (*thread)(int irq, void *p);
-	int type;
-	char *name;
-	int irq;
-	s64 timestamp;
-};
-
-
-struct iio_poll_func
-*iio_alloc_pollfunc(irqreturn_t (*h)(int irq, void *p),
-		    irqreturn_t (*thread)(int irq, void *p),
-		    int type,
-		    struct iio_dev *indio_dev,
-		    const char *fmt,
-		    ...);
-void iio_dealloc_pollfunc(struct iio_poll_func *pf);
-irqreturn_t iio_pollfunc_store_time(int irq, void *p);
-
-void iio_trigger_notify_done(struct iio_trigger *trig);
-
-/*
- * Two functions for common case where all that happens is a pollfunc
- * is attached and detached from a trigger
- */
-int iio_triggered_buffer_postenable(struct iio_dev *indio_dev);
-int iio_triggered_buffer_predisable(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/types.h b/drivers/staging/iio/types.h
deleted file mode 100644
index 0c3213666901..000000000000
--- a/drivers/staging/iio/types.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* industrial I/O data types needed both in and out of kernel
- *
- * Copyright (c) 2008 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef _IIO_TYPES_H_
-#define _IIO_TYPES_H_
-
-enum iio_chan_type {
-	/* real channel types */
-	IIO_VOLTAGE,
-	IIO_CURRENT,
-	IIO_POWER,
-	IIO_ACCEL,
-	IIO_ANGL_VEL,
-	IIO_MAGN,
-	IIO_LIGHT,
-	IIO_INTENSITY,
-	IIO_PROXIMITY,
-	IIO_TEMP,
-	IIO_INCLI,
-	IIO_ROT,
-	IIO_ANGL,
-	IIO_TIMESTAMP,
-	IIO_CAPACITANCE,
-};
-
-enum iio_modifier {
-	IIO_NO_MOD,
-	IIO_MOD_X,
-	IIO_MOD_Y,
-	IIO_MOD_Z,
-	IIO_MOD_X_AND_Y,
-	IIO_MOD_X_AND_Z,
-	IIO_MOD_Y_AND_Z,
-	IIO_MOD_X_AND_Y_AND_Z,
-	IIO_MOD_X_OR_Y,
-	IIO_MOD_X_OR_Z,
-	IIO_MOD_Y_OR_Z,
-	IIO_MOD_X_OR_Y_OR_Z,
-	IIO_MOD_LIGHT_BOTH,
-	IIO_MOD_LIGHT_IR,
-};
-
-#define IIO_VAL_INT 1
-#define IIO_VAL_INT_PLUS_MICRO 2
-#define IIO_VAL_INT_PLUS_NANO 3
-
-#endif /* _IIO_TYPES_H_ */
diff --git a/drivers/staging/ipack/Kconfig b/drivers/staging/ipack/Kconfig
new file mode 100644
index 000000000000..af321789dddb
--- /dev/null
+++ b/drivers/staging/ipack/Kconfig
@@ -0,0 +1,20 @@
+#
+# IPACK configuration.
+#
+
+menuconfig IPACK_BUS
+	tristate "IndustryPack bus support"
+	---help---
+	  If you say Y here you get support for the IndustryPack Framework
+	  for drivers for many types of boards that support this industrial
+	  bus. The IndustryPack Framework is a virtual bus allowing to
+	  communicate between carrier and mezzanine cards connected through
+	  this bus.
+
+if IPACK_BUS
+
+source "drivers/staging/ipack/bridges/Kconfig"
+
+source "drivers/staging/ipack/devices/Kconfig"
+
+endif # IPACK
diff --git a/drivers/staging/ipack/Makefile b/drivers/staging/ipack/Makefile
new file mode 100644
index 000000000000..85ff223616fd
--- /dev/null
+++ b/drivers/staging/ipack/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the IPACK bridge device drivers.
+#
+obj-$(CONFIG_IPACK_BUS)		+= ipack.o
+obj-y				+= devices/
+obj-y				+= bridges/
diff --git a/drivers/staging/ipack/TODO b/drivers/staging/ipack/TODO
new file mode 100644
index 000000000000..3a45a53afd88
--- /dev/null
+++ b/drivers/staging/ipack/TODO
@@ -0,0 +1,46 @@
+				TODO
+				====
+Introduction
+============
+
+These drivers add support for IndustryPack devices: carrier and mezzanine
+boards.
+
+The ipack driver is just an abstraction of the bus providing the common
+operations between the two kind of boards.
+
+TODO
+====
+
+TPCI-200
+--------
+
+* It receives the name of the mezzanine plugged in each slot by SYSFS.
+  No autodetection supported yet, because the mezzanine driver could not be
+  loaded at the time that the tpci200 driver loads.
+
+* It has a linked list with the tpci200 devices it is managing. Get rid of it
+  and use driver_for_each_device() instead.
+
+IP-OCTAL
+--------
+
+* It has a linked list which saves the devices it is currently
+  managing. It should use the driver_for_each_device() function. It is not there
+  due to the impossibility of using container_of macro to recover the
+  corresponding "struct ipoctal" because the attribute "struct ipack_device" is
+  a pointer. This code should be refactored.
+
+Ipack
+-----
+
+* The structures and API exported can be improved a lot. For example, the
+  way to unregistering mezzanine devices, doing the mezzanine driver a call to
+  remove_device() to notify the carrier driver, or the opposite with the call to
+  the ipack_driver_ops' remove() function could be improved.
+
+
+Contact
+=======
+
+Contact: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
\ No newline at end of file
diff --git a/drivers/staging/ipack/bridges/Kconfig b/drivers/staging/ipack/bridges/Kconfig
new file mode 100644
index 000000000000..97c837ea7a03
--- /dev/null
+++ b/drivers/staging/ipack/bridges/Kconfig
@@ -0,0 +1,8 @@
+config BOARD_TPCI200
+	tristate "TEWS TPCI-200 support for IndustryPack bus"
+	depends on IPACK_BUS
+	depends on PCI
+	help
+	  This driver supports the TEWS TPCI200 device for the IndustryPack bus.
+	default n
+
diff --git a/drivers/staging/ipack/bridges/Makefile b/drivers/staging/ipack/bridges/Makefile
new file mode 100644
index 000000000000..d8b76459300f
--- /dev/null
+++ b/drivers/staging/ipack/bridges/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_BOARD_TPCI200) += tpci200.o
diff --git a/drivers/staging/ipack/bridges/tpci200.c b/drivers/staging/ipack/bridges/tpci200.c
new file mode 100644
index 000000000000..ad2870750235
--- /dev/null
+++ b/drivers/staging/ipack/bridges/tpci200.c
@@ -0,0 +1,1141 @@
+/**
+ * tpci200.c
+ *
+ * driver for the TEWS TPCI-200 device
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include "tpci200.h"
+
+static struct ipack_bus_ops tpci200_bus_ops;
+
+/* TPCI200 controls registers */
+static int control_reg[] = {
+	TPCI200_CONTROL_A_REG,
+	TPCI200_CONTROL_B_REG,
+	TPCI200_CONTROL_C_REG,
+	TPCI200_CONTROL_D_REG
+};
+
+/* Linked list to save the registered devices */
+static LIST_HEAD(tpci200_list);
+
+static int tpci200_slot_unregister(struct ipack_device *dev);
+
+static struct tpci200_board *check_slot(struct ipack_device *dev)
+{
+	struct tpci200_board *tpci200;
+	int found = 0;
+
+	if (dev == NULL) {
+		pr_info("Slot doesn't exist.\n");
+		return NULL;
+	}
+
+	list_for_each_entry(tpci200, &tpci200_list, list) {
+		if (tpci200->number == dev->bus_nr) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found) {
+		pr_err("Carrier not found\n");
+		return NULL;
+	}
+
+	if (dev->slot >= TPCI200_NB_SLOT) {
+		pr_info("Slot [%d:%d] doesn't exist! Last tpci200 slot is %d.\n",
+			dev->bus_nr, dev->slot, TPCI200_NB_SLOT-1);
+		return NULL;
+	}
+
+	BUG_ON(tpci200->slots == NULL);
+	if (tpci200->slots[dev->slot].dev == NULL) {
+		pr_info("Slot [%d:%d] is not registered !\n", dev->bus_nr,
+			dev->slot);
+		return NULL;
+	}
+
+	return tpci200;
+}
+
+static inline unsigned char __tpci200_read8(void __iomem *address,
+					    unsigned long offset)
+{
+	return ioread8(address + (offset^1));
+}
+
+static inline unsigned short __tpci200_read16(void __iomem *address,
+					      unsigned long offset)
+{
+	return ioread16(address + offset);
+}
+
+static inline unsigned int __tpci200_read32(void __iomem *address,
+					    unsigned long offset)
+{
+	return swahw32(ioread32(address + offset));
+}
+
+static inline void __tpci200_write8(unsigned char value,
+				    void __iomem *address, unsigned long offset)
+{
+	iowrite8(value, address+(offset^1));
+}
+
+static inline void __tpci200_write16(unsigned short value,
+				     void __iomem *address,
+				     unsigned long offset)
+{
+	iowrite16(value, address+offset);
+}
+
+static inline void __tpci200_write32(unsigned int value,
+				     void __iomem *address,
+				     unsigned long offset)
+{
+	iowrite32(swahw32(value), address+offset);
+}
+
+static struct ipack_addr_space *get_slot_address_space(struct ipack_device *dev,
+						       int space)
+{
+	struct ipack_addr_space *addr;
+
+	switch (space) {
+	case IPACK_IO_SPACE:
+		addr = &dev->io_space;
+		break;
+	case IPACK_ID_SPACE:
+		addr = &dev->id_space;
+		break;
+	case IPACK_MEM_SPACE:
+		addr = &dev->mem_space;
+		break;
+	default:
+		pr_err("Slot [%d:%d] space number %d doesn't exist !\n",
+		       dev->bus_nr, dev->slot, space);
+		return NULL;
+		break;
+	}
+
+	if ((addr->size == 0) || (addr->address == NULL)) {
+		pr_err("Error, slot space not mapped !\n");
+		return NULL;
+	}
+
+	return addr;
+}
+
+static int tpci200_read8(struct ipack_device *dev, int space,
+			 unsigned long offset, unsigned char *value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if (offset >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+
+	*value = __tpci200_read8(addr->address, offset);
+
+	return 0;
+}
+
+static int tpci200_read16(struct ipack_device *dev, int space,
+			  unsigned long offset, unsigned short *value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if ((offset+2) >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+	*value = __tpci200_read16(addr->address, offset);
+
+	return 0;
+}
+
+static int tpci200_read32(struct ipack_device *dev, int space,
+			  unsigned long offset, unsigned int *value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if ((offset+4) >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+
+	*value = __tpci200_read32(addr->address, offset);
+
+	return 0;
+}
+
+static int tpci200_write8(struct ipack_device *dev, int space,
+			  unsigned long offset, unsigned char value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if (offset >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+
+	__tpci200_write8(value, addr->address, offset);
+
+	return 0;
+}
+
+static int tpci200_write16(struct ipack_device *dev, int space,
+			   unsigned long offset, unsigned short value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if ((offset+2) >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+
+	__tpci200_write16(value, addr->address, offset);
+
+	return 0;
+}
+
+static int tpci200_write32(struct ipack_device *dev, int space,
+			   unsigned long offset, unsigned int value)
+{
+	struct ipack_addr_space *addr;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	addr = get_slot_address_space(dev, space);
+	if (addr == NULL)
+		return -EINVAL;
+
+	if ((offset+4) >= addr->size) {
+		pr_err("Error, slot space offset error !\n");
+		return -EFAULT;
+	}
+
+	__tpci200_write32(value, addr->address, offset);
+
+	return 0;
+}
+
+static void tpci200_unregister(struct tpci200_board *tpci200)
+{
+	int i;
+
+	free_irq(tpci200->info->pdev->irq, (void *) tpci200);
+
+	pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
+	pci_iounmap(tpci200->info->pdev, tpci200->info->ioidint_space);
+	pci_iounmap(tpci200->info->pdev, tpci200->info->mem8_space);
+
+	pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+	pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+	pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+
+	pci_disable_device(tpci200->info->pdev);
+	pci_dev_put(tpci200->info->pdev);
+
+	kfree(tpci200->info);
+
+	for (i = 0; i < TPCI200_NB_SLOT; i++) {
+		tpci200->slots[i].io_phys.address = NULL;
+		tpci200->slots[i].io_phys.size = 0;
+		tpci200->slots[i].id_phys.address = NULL;
+		tpci200->slots[i].id_phys.size = 0;
+		tpci200->slots[i].mem_phys.address = NULL;
+		tpci200->slots[i].mem_phys.size = 0;
+	}
+}
+
+static irqreturn_t tpci200_interrupt(int irq, void *dev_id)
+{
+	struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id;
+	int i;
+	unsigned long flags;
+	unsigned short status_reg, reg_value;
+	unsigned short unhandled_ints = 0;
+	irqreturn_t ret = IRQ_NONE;
+
+	spin_lock_irqsave(&tpci200->info->access_lock, flags);
+
+	/* Read status register */
+	status_reg = readw(tpci200->info->interface_regs +
+			   TPCI200_STATUS_REG);
+
+	if (status_reg & TPCI200_SLOT_INT_MASK) {
+		unhandled_ints = status_reg & TPCI200_SLOT_INT_MASK;
+		/* callback to the IRQ handler for the corresponding slot */
+		for (i = 0; i < TPCI200_NB_SLOT; i++) {
+			if ((tpci200->slots[i].irq != NULL) &&
+			    (status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2*i)))) {
+
+				ret = tpci200->slots[i].irq->handler(tpci200->slots[i].irq->arg);
+
+				/* Dummy reads */
+				readw(tpci200->slots[i].dev->io_space.address +
+				      0xC0);
+				readw(tpci200->slots[i].dev->io_space.address +
+				      0xC2);
+
+				unhandled_ints &= ~(((TPCI200_A_INT0 | TPCI200_A_INT1) << (2*i)));
+			}
+		}
+	}
+	/* Interrupt not handled are disabled */
+	if (unhandled_ints) {
+		for (i = 0; i < TPCI200_NB_SLOT; i++) {
+			if (unhandled_ints & ((TPCI200_INT0_EN | TPCI200_INT1_EN) << (2*i))) {
+				pr_info("No registered ISR for slot [%d:%d]!. IRQ will be disabled.\n",
+					tpci200->number, i);
+				reg_value = readw(
+					tpci200->info->interface_regs +
+					control_reg[i]);
+				reg_value &=
+					~(TPCI200_INT0_EN | TPCI200_INT1_EN);
+				writew(reg_value,
+				       (tpci200->info->interface_regs +
+					control_reg[i]));
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&tpci200->info->access_lock, flags);
+	return ret;
+}
+
+#ifdef CONFIG_SYSFS
+
+static struct ipack_device *tpci200_slot_register(unsigned int tpci200_number,
+						  unsigned int slot_position)
+{
+	int found = 0;
+	struct ipack_device  *dev;
+	struct tpci200_board *tpci200;
+
+	list_for_each_entry(tpci200, &tpci200_list, list) {
+		if (tpci200->number == tpci200_number) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found) {
+		pr_err("carrier board not found for the device\n");
+		return NULL;
+	}
+
+	if (slot_position >= TPCI200_NB_SLOT) {
+		pr_info("Slot [%d:%d] doesn't exist!\n", tpci200_number,
+			slot_position);
+		return NULL;
+	}
+
+	if (mutex_lock_interruptible(&tpci200->mutex))
+		return NULL;
+
+	if (tpci200->slots[slot_position].dev != NULL) {
+		pr_err("Slot [%d:%d] already installed !\n", tpci200_number,
+		       slot_position);
+		goto err_unlock;
+	}
+
+	/*
+	 * Give the same IRQ number as the slot number.
+	 * The TPCI200 has assigned his own two IRQ by PCI bus driver
+	 */
+	dev = ipack_device_register(tpci200->info->ipack_bus,
+				    slot_position, slot_position);
+	if (dev == NULL) {
+		pr_info("Slot [%d:%d] Unable to register an ipack device\n",
+			tpci200_number, slot_position);
+		goto err_unlock;
+	}
+
+	tpci200->slots[slot_position].dev = dev;
+	mutex_unlock(&tpci200->mutex);
+	return dev;
+
+err_unlock:
+	mutex_unlock(&tpci200->mutex);
+	return NULL;
+}
+
+static ssize_t tpci200_store_board(struct device *pdev, const char *buf,
+				   size_t count, int slot)
+{
+	struct tpci200_board *card = dev_get_drvdata(pdev);
+	struct ipack_device *dev = card->slots[slot].dev;
+
+	if (dev != NULL)
+		return -EBUSY;
+
+	dev = tpci200_slot_register(card->number, slot);
+	if (dev == NULL)
+		return -ENODEV;
+
+	return count;
+}
+
+static ssize_t tpci200_show_board(struct device *pdev, char *buf, int slot)
+{
+	struct tpci200_board *card = dev_get_drvdata(pdev);
+	struct ipack_device *dev = card->slots[slot].dev;
+
+	if (dev != NULL)
+		return snprintf(buf, PAGE_SIZE, "%s\n", dev_name(&dev->dev));
+	else
+		return snprintf(buf, PAGE_SIZE, "none\n");
+}
+
+static ssize_t tpci200_show_description(struct device *pdev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return snprintf(buf, PAGE_SIZE,
+			"TEWS tpci200 carrier PCI for Industry-pack mezzanines.\n");
+}
+
+static ssize_t tpci200_show_board_slot0(struct device *pdev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return tpci200_show_board(pdev, buf, 0);
+}
+
+static ssize_t tpci200_store_board_slot0(struct device *pdev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	return tpci200_store_board(pdev, buf, count, 0);
+}
+
+static ssize_t tpci200_show_board_slot1(struct device *pdev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return tpci200_show_board(pdev, buf, 1);
+}
+
+static ssize_t tpci200_store_board_slot1(struct device *pdev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	return tpci200_store_board(pdev, buf, count, 1);
+}
+
+static ssize_t tpci200_show_board_slot2(struct device *pdev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return tpci200_show_board(pdev, buf, 2);
+}
+
+static ssize_t tpci200_store_board_slot2(struct device *pdev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	return tpci200_store_board(pdev, buf, count, 2);
+}
+
+
+static ssize_t tpci200_show_board_slot3(struct device *pdev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return tpci200_show_board(pdev, buf, 3);
+}
+
+static ssize_t tpci200_store_board_slot3(struct device *pdev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	return tpci200_store_board(pdev, buf, count, 3);
+}
+
+/* Declaration of the device attributes for the TPCI200 */
+static DEVICE_ATTR(description, S_IRUGO,
+		   tpci200_show_description, NULL);
+static DEVICE_ATTR(board_slot0, S_IRUGO | S_IWUSR,
+		   tpci200_show_board_slot0, tpci200_store_board_slot0);
+static DEVICE_ATTR(board_slot1, S_IRUGO | S_IWUSR,
+		   tpci200_show_board_slot1, tpci200_store_board_slot1);
+static DEVICE_ATTR(board_slot2, S_IRUGO | S_IWUSR,
+		   tpci200_show_board_slot2, tpci200_store_board_slot2);
+static DEVICE_ATTR(board_slot3, S_IRUGO | S_IWUSR,
+		   tpci200_show_board_slot3, tpci200_store_board_slot3);
+
+static struct attribute *tpci200_attrs[] = {
+	&dev_attr_description.attr,
+	&dev_attr_board_slot0.attr,
+	&dev_attr_board_slot1.attr,
+	&dev_attr_board_slot2.attr,
+	&dev_attr_board_slot3.attr,
+	NULL,
+};
+
+static struct attribute_group tpci200_attr_group = {
+	.attrs = tpci200_attrs,
+};
+
+static int tpci200_create_sysfs_files(struct tpci200_board *card)
+{
+	return sysfs_create_group(&card->info->pdev->dev.kobj,
+				  &tpci200_attr_group);
+}
+
+static void tpci200_remove_sysfs_files(struct tpci200_board *card)
+{
+	sysfs_remove_group(&card->info->pdev->dev.kobj, &tpci200_attr_group);
+}
+
+#else
+
+static int tpci200_create_sysfs_files(struct tpci200_board *card)
+{
+	return 0;
+}
+
+static void tpci200_remove_sysfs_files(struct tpci200_board *card)
+{
+}
+
+#endif /* CONFIG_SYSFS */
+
+static int tpci200_register(struct tpci200_board *tpci200)
+{
+	int  i;
+	int res;
+	unsigned long ioidint_base;
+	unsigned long mem_base;
+	unsigned short slot_ctrl;
+
+	if (pci_enable_device(tpci200->info->pdev) < 0)
+		return -ENODEV;
+
+	if (tpci200_create_sysfs_files(tpci200) < 0) {
+		pr_err("failed creating sysfs files\n");
+		res = -EFAULT;
+		goto out_disable_pci;
+	}
+
+	/* Request IP interface register (Bar 2) */
+	res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR,
+				 "Carrier IP interface registers");
+	if (res) {
+		pr_err("(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 2 !",
+		       tpci200->info->pdev->bus->number,
+		       tpci200->info->pdev->devfn);
+		goto out_remove_sysfs;
+	}
+
+	/* Request IO ID INT space (Bar 3) */
+	res = pci_request_region(tpci200->info->pdev,
+				 TPCI200_IO_ID_INT_SPACES_BAR,
+				 "Carrier IO ID INT space");
+	if (res) {
+		pr_err("(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 3 !",
+		       tpci200->info->pdev->bus->number,
+		       tpci200->info->pdev->devfn);
+		goto out_release_ip_space;
+	}
+
+	/* Request MEM space (Bar 4) */
+	res = pci_request_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR,
+				 "Carrier MEM space");
+	if (res) {
+		pr_err("(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 4!",
+		       tpci200->info->pdev->bus->number,
+		       tpci200->info->pdev->devfn);
+		goto out_release_ioid_int_space;
+	}
+
+	/* Map internal tpci200 driver user space */
+	tpci200->info->interface_regs =
+		ioremap(pci_resource_start(tpci200->info->pdev,
+					   TPCI200_IP_INTERFACE_BAR),
+			TPCI200_IFACE_SIZE);
+	tpci200->info->ioidint_space =
+		ioremap(pci_resource_start(tpci200->info->pdev,
+					   TPCI200_IO_ID_INT_SPACES_BAR),
+			TPCI200_IOIDINT_SIZE);
+	tpci200->info->mem8_space =
+		ioremap(pci_resource_start(tpci200->info->pdev,
+					   TPCI200_MEM8_SPACE_BAR),
+			TPCI200_MEM8_SIZE);
+
+	spin_lock_init(&tpci200->info->access_lock);
+	ioidint_base = pci_resource_start(tpci200->info->pdev,
+					  TPCI200_IO_ID_INT_SPACES_BAR);
+	mem_base = pci_resource_start(tpci200->info->pdev,
+				      TPCI200_MEM8_SPACE_BAR);
+
+	/* Set the default parameters of the slot
+	 * INT0 disabled, level sensitive
+	 * INT1 disabled, level sensitive
+	 * error interrupt disabled
+	 * timeout interrupt disabled
+	 * recover time disabled
+	 * clock rate 8 MHz
+	 */
+	slot_ctrl = 0;
+
+	/* Set all slot physical address space */
+	for (i = 0; i < TPCI200_NB_SLOT; i++) {
+		tpci200->slots[i].io_phys.address =
+			(void __iomem *)ioidint_base +
+			TPCI200_IO_SPACE_OFF + TPCI200_IO_SPACE_GAP*i;
+		tpci200->slots[i].io_phys.size = TPCI200_IO_SPACE_SIZE;
+
+		tpci200->slots[i].id_phys.address =
+			(void __iomem *)ioidint_base +
+			TPCI200_ID_SPACE_OFF + TPCI200_ID_SPACE_GAP*i;
+		tpci200->slots[i].id_phys.size = TPCI200_ID_SPACE_SIZE;
+
+		tpci200->slots[i].mem_phys.address =
+			(void __iomem *)mem_base + TPCI200_MEM8_GAP*i;
+		tpci200->slots[i].mem_phys.size = TPCI200_MEM8_SIZE;
+
+		writew(slot_ctrl, (tpci200->info->interface_regs +
+				   control_reg[i]));
+	}
+
+	res = request_irq(tpci200->info->pdev->irq,
+			  tpci200_interrupt, IRQF_SHARED,
+			  KBUILD_MODNAME, (void *) tpci200);
+	if (res) {
+		pr_err("(bn 0x%X, sn 0x%X) unable to register IRQ !",
+		       tpci200->info->pdev->bus->number,
+		       tpci200->info->pdev->devfn);
+		tpci200_unregister(tpci200);
+		goto out_err;
+	}
+
+	return 0;
+
+out_release_ioid_int_space:
+	pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+out_release_ip_space:
+	pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+out_remove_sysfs:
+	tpci200_remove_sysfs_files(tpci200);
+out_disable_pci:
+	pci_disable_device(tpci200->info->pdev);
+out_err:
+	return res;
+}
+
+static int __tpci200_request_irq(struct tpci200_board *tpci200,
+				 struct ipack_device *dev)
+{
+	unsigned short slot_ctrl;
+
+	/* Set the default parameters of the slot
+	 * INT0 enabled, level sensitive
+	 * INT1 enabled, level sensitive
+	 * error interrupt disabled
+	 * timeout interrupt disabled
+	 * recover time disabled
+	 * clock rate 8 MHz
+	 */
+	slot_ctrl = TPCI200_INT0_EN | TPCI200_INT1_EN;
+	writew(slot_ctrl, (tpci200->info->interface_regs +
+			   control_reg[dev->slot]));
+
+	return 0;
+}
+
+static void __tpci200_free_irq(struct tpci200_board *tpci200,
+			       struct ipack_device *dev)
+{
+	unsigned short slot_ctrl;
+
+	/* Set the default parameters of the slot
+	 * INT0 disabled, level sensitive
+	 * INT1 disabled, level sensitive
+	 * error interrupt disabled
+	 * timeout interrupt disabled
+	 * recover time disabled
+	 * clock rate 8 MHz
+	 */
+	slot_ctrl = 0;
+	writew(slot_ctrl, (tpci200->info->interface_regs +
+			   control_reg[dev->slot]));
+}
+
+static int tpci200_free_irq(struct ipack_device *dev)
+{
+	int res;
+	struct slot_irq *slot_irq;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL) {
+		res = -EINVAL;
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&tpci200->mutex)) {
+		res = -ERESTARTSYS;
+		goto out;
+	}
+
+	if (tpci200->slots[dev->slot].irq == NULL) {
+		res = -EINVAL;
+		goto out_unlock;
+	}
+
+	__tpci200_free_irq(tpci200, dev);
+	slot_irq = tpci200->slots[dev->slot].irq;
+	tpci200->slots[dev->slot].irq = NULL;
+	kfree(slot_irq);
+
+out_unlock:
+	mutex_unlock(&tpci200->mutex);
+out:
+	return res;
+}
+
+static int tpci200_slot_unmap_space(struct ipack_device *dev, int space)
+{
+	int res;
+	struct ipack_addr_space *virt_addr_space;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL) {
+		res = -EINVAL;
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&tpci200->mutex)) {
+		res = -ERESTARTSYS;
+		goto out;
+	}
+
+	switch (space) {
+	case IPACK_IO_SPACE:
+		if (dev->io_space.address == NULL) {
+			pr_info("Slot [%d:%d] IO space not mapped !\n",
+				dev->bus_nr, dev->slot);
+			goto out_unlock;
+		}
+		virt_addr_space = &dev->io_space;
+		break;
+	case IPACK_ID_SPACE:
+		if (dev->id_space.address == NULL) {
+			pr_info("Slot [%d:%d] ID space not mapped !\n",
+				dev->bus_nr, dev->slot);
+			goto out_unlock;
+		}
+		virt_addr_space = &dev->id_space;
+		break;
+	case IPACK_MEM_SPACE:
+		if (dev->mem_space.address == NULL) {
+			pr_info("Slot [%d:%d] MEM space not mapped !\n",
+				dev->bus_nr, dev->slot);
+		goto out_unlock;
+		}
+		virt_addr_space = &dev->mem_space;
+		break;
+	default:
+		pr_err("Slot [%d:%d] space number %d doesn't exist !\n",
+		       dev->bus_nr, dev->slot, space);
+		res = -EINVAL;
+		goto out_unlock;
+		break;
+	}
+
+	iounmap(virt_addr_space->address);
+
+	virt_addr_space->address = NULL;
+	virt_addr_space->size = 0;
+out_unlock:
+	mutex_unlock(&tpci200->mutex);
+out:
+	return res;
+}
+
+static int tpci200_slot_unregister(struct ipack_device *dev)
+{
+	struct tpci200_board *tpci200;
+
+	if (dev == NULL)
+		return -ENODEV;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL)
+		return -EINVAL;
+
+	tpci200_free_irq(dev);
+
+	if (mutex_lock_interruptible(&tpci200->mutex))
+		return -ERESTARTSYS;
+
+	ipack_device_unregister(dev);
+	tpci200->slots[dev->slot].dev = NULL;
+	mutex_unlock(&tpci200->mutex);
+
+	return 0;
+}
+
+static int tpci200_slot_map_space(struct ipack_device *dev,
+				  unsigned int memory_size, int space)
+{
+	int res;
+	unsigned int size_to_map;
+	void __iomem *phys_address;
+	struct ipack_addr_space *virt_addr_space;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL) {
+		res = -EINVAL;
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&tpci200->mutex)) {
+		res = -ERESTARTSYS;
+		goto out;
+	}
+
+	switch (space) {
+	case IPACK_IO_SPACE:
+		if (dev->io_space.address != NULL) {
+			pr_err("Slot [%d:%d] IO space already mapped !\n",
+			       tpci200->number, dev->slot);
+			res = -EINVAL;
+			goto out_unlock;
+		}
+		virt_addr_space = &dev->io_space;
+
+		phys_address = tpci200->slots[dev->slot].io_phys.address;
+		size_to_map = tpci200->slots[dev->slot].io_phys.size;
+		break;
+	case IPACK_ID_SPACE:
+		if (dev->id_space.address != NULL) {
+			pr_err("Slot [%d:%d] ID space already mapped !\n",
+			       tpci200->number, dev->slot);
+			res = -EINVAL;
+			goto out_unlock;
+		}
+		virt_addr_space = &dev->id_space;
+
+		phys_address = tpci200->slots[dev->slot].id_phys.address;
+		size_to_map = tpci200->slots[dev->slot].id_phys.size;
+		break;
+	case IPACK_MEM_SPACE:
+		if (dev->mem_space.address != NULL) {
+			pr_err("Slot [%d:%d] MEM space already mapped !\n",
+			       tpci200->number, dev->slot);
+			res = -EINVAL;
+			goto out_unlock;
+		}
+		virt_addr_space = &dev->mem_space;
+
+		if (memory_size > tpci200->slots[dev->slot].mem_phys.size) {
+			pr_err("Slot [%d:%d] request is 0x%X memory, only 0x%X available !\n",
+			       dev->bus_nr, dev->slot, memory_size,
+			       tpci200->slots[dev->slot].mem_phys.size);
+			res = -EINVAL;
+			goto out_unlock;
+		}
+
+		phys_address = tpci200->slots[dev->slot].mem_phys.address;
+		size_to_map = memory_size;
+		break;
+	default:
+		pr_err("Slot [%d:%d] space %d doesn't exist !\n",
+		       tpci200->number, dev->slot, space);
+		res = -EINVAL;
+		goto out_unlock;
+		break;
+	}
+
+	virt_addr_space->size = size_to_map;
+	virt_addr_space->address =
+		ioremap((unsigned long)phys_address, size_to_map);
+
+out_unlock:
+	mutex_unlock(&tpci200->mutex);
+out:
+	return res;
+}
+
+static int tpci200_request_irq(struct ipack_device *dev, int vector,
+			       int (*handler)(void *), void *arg)
+{
+	int res;
+	struct slot_irq *slot_irq;
+	struct tpci200_board *tpci200;
+
+	tpci200 = check_slot(dev);
+	if (tpci200 == NULL) {
+		res = -EINVAL;
+		goto out;
+	}
+
+	if (mutex_lock_interruptible(&tpci200->mutex)) {
+		res = -ERESTARTSYS;
+		goto out;
+	}
+
+	if (tpci200->slots[dev->slot].irq != NULL) {
+		pr_err("Slot [%d:%d] IRQ already registered !\n", dev->bus_nr,
+		       dev->slot);
+		res = -EINVAL;
+		goto out_unlock;
+	}
+
+	slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL);
+	if (slot_irq == NULL) {
+		pr_err("Slot [%d:%d] unable to allocate memory for IRQ !\n",
+		       dev->bus_nr, dev->slot);
+		res = -ENOMEM;
+		goto out_unlock;
+	}
+
+	/*
+	 * WARNING: Setup Interrupt Vector in the IndustryPack device
+	 * before an IRQ request.
+	 * Read the User Manual of your IndustryPack device to know
+	 * where to write the vector in memory.
+	 */
+	slot_irq->vector = vector;
+	slot_irq->handler = handler;
+	slot_irq->arg = arg;
+	slot_irq->name = dev_name(&dev->dev);
+
+	tpci200->slots[dev->slot].irq = slot_irq;
+	res = __tpci200_request_irq(tpci200, dev);
+
+out_unlock:
+	mutex_unlock(&tpci200->mutex);
+out:
+	return res;
+}
+
+static void tpci200_slot_remove(struct tpci200_slot *slot)
+{
+	if ((slot->dev == NULL) ||
+	    (slot->dev->driver->ops->remove == NULL))
+		return;
+
+	slot->dev->driver->ops->remove(slot->dev);
+}
+
+static void tpci200_uninstall(struct tpci200_board *tpci200)
+{
+	int i;
+
+	for (i = 0; i < TPCI200_NB_SLOT; i++)
+		tpci200_slot_remove(&tpci200->slots[i]);
+
+	tpci200_unregister(tpci200);
+	kfree(tpci200->slots);
+}
+
+static struct ipack_bus_ops tpci200_bus_ops = {
+	.map_space = tpci200_slot_map_space,
+	.unmap_space = tpci200_slot_unmap_space,
+	.request_irq = tpci200_request_irq,
+	.free_irq = tpci200_free_irq,
+	.read8 = tpci200_read8,
+	.read16 = tpci200_read16,
+	.read32 = tpci200_read32,
+	.write8 = tpci200_write8,
+	.write16 = tpci200_write16,
+	.write32 = tpci200_write32,
+	.remove_device = tpci200_slot_unregister,
+};
+
+static int tpci200_install(struct tpci200_board *tpci200)
+{
+	int res;
+
+	tpci200->slots = kzalloc(
+		TPCI200_NB_SLOT * sizeof(struct tpci200_slot), GFP_KERNEL);
+	if (tpci200->slots == NULL) {
+		res = -ENOMEM;
+		goto out_err;
+	}
+
+	res = tpci200_register(tpci200);
+	if (res)
+		goto out_free;
+
+	mutex_init(&tpci200->mutex);
+	return 0;
+
+out_free:
+	kfree(tpci200->slots);
+	tpci200->slots = NULL;
+out_err:
+	return res;
+}
+
+static int tpci200_pciprobe(struct pci_dev *pdev,
+			    const struct pci_device_id *id)
+{
+	int ret;
+	struct tpci200_board *tpci200;
+
+	tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL);
+	if (!tpci200)
+		return -ENOMEM;
+
+	tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL);
+	if (!tpci200->info) {
+		kfree(tpci200);
+		return -ENOMEM;
+	}
+
+	/* Save struct pci_dev pointer */
+	tpci200->info->pdev = pdev;
+	tpci200->info->id_table = (struct pci_device_id *)id;
+
+	/* register the device and initialize it */
+	ret = tpci200_install(tpci200);
+	if (ret) {
+		pr_err("Error during tpci200 install !\n");
+		kfree(tpci200->info);
+		kfree(tpci200);
+		return -ENODEV;
+	}
+
+	/* Register the carrier in the industry pack bus driver */
+	tpci200->info->ipack_bus = ipack_bus_register(&pdev->dev,
+						      TPCI200_NB_SLOT,
+						      &tpci200_bus_ops);
+	if (!tpci200->info->ipack_bus) {
+		pr_err("error registering the carrier on ipack driver\n");
+		tpci200_uninstall(tpci200);
+		kfree(tpci200->info);
+		kfree(tpci200);
+		return -EFAULT;
+	}
+
+	/* save the bus number given by ipack to logging purpose */
+	tpci200->number = tpci200->info->ipack_bus->bus_nr;
+	dev_set_drvdata(&pdev->dev, tpci200);
+	/* add the registered device in an internal linked list */
+	list_add_tail(&tpci200->list, &tpci200_list);
+	return ret;
+}
+
+static void __tpci200_pci_remove(struct tpci200_board *tpci200)
+{
+	tpci200_uninstall(tpci200);
+	tpci200_remove_sysfs_files(tpci200);
+	list_del(&tpci200->list);
+	ipack_bus_unregister(tpci200->info->ipack_bus);
+	kfree(tpci200->info);
+	kfree(tpci200);
+}
+
+static void __devexit tpci200_pci_remove(struct pci_dev *dev)
+{
+	struct tpci200_board *tpci200, *next;
+
+	/* Search the registered device to uninstall it */
+	list_for_each_entry_safe(tpci200, next, &tpci200_list, list) {
+		if (tpci200->info->pdev == dev) {
+			__tpci200_pci_remove(tpci200);
+			break;
+		}
+	}
+}
+
+static struct pci_device_id tpci200_idtable[2] = {
+	{ TPCI200_VENDOR_ID, TPCI200_DEVICE_ID, TPCI200_SUBVENDOR_ID,
+	  TPCI200_SUBDEVICE_ID },
+	{ 0, },
+};
+
+static struct pci_driver tpci200_pci_drv = {
+	.name = "tpci200",
+	.id_table = tpci200_idtable,
+	.probe = tpci200_pciprobe,
+	.remove = __devexit_p(tpci200_pci_remove),
+};
+
+static int __init tpci200_drvr_init_module(void)
+{
+	return pci_register_driver(&tpci200_pci_drv);
+}
+
+static void __exit tpci200_drvr_exit_module(void)
+{
+	struct tpci200_board *tpci200, *next;
+
+	list_for_each_entry_safe(tpci200, next, &tpci200_list, list)
+		__tpci200_pci_remove(tpci200);
+
+	pci_unregister_driver(&tpci200_pci_drv);
+}
+
+MODULE_DESCRIPTION("TEWS TPCI-200 device driver");
+MODULE_LICENSE("GPL");
+module_init(tpci200_drvr_init_module);
+module_exit(tpci200_drvr_exit_module);
diff --git a/drivers/staging/ipack/bridges/tpci200.h b/drivers/staging/ipack/bridges/tpci200.h
new file mode 100644
index 000000000000..0b547eedddc2
--- /dev/null
+++ b/drivers/staging/ipack/bridges/tpci200.h
@@ -0,0 +1,162 @@
+/**
+ * tpci200.h
+ *
+ * driver for the carrier TEWS TPCI-200
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#ifndef _TPCI200_H_
+#define _TPCI200_H_
+
+#include <linux/version.h>
+#include <linux/limits.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/swab.h>
+#include <linux/io.h>
+
+#include "../ipack.h"
+
+#define TPCI200_NB_SLOT               0x4
+#define TPCI200_NB_BAR                0x6
+
+#define TPCI200_VENDOR_ID             0x1498
+#define TPCI200_DEVICE_ID             0x30C8
+#define TPCI200_SUBVENDOR_ID          0x1498
+#define TPCI200_SUBDEVICE_ID          0x300A
+
+#define TPCI200_IP_INTERFACE_BAR      2
+#define TPCI200_IO_ID_INT_SPACES_BAR  3
+#define TPCI200_MEM16_SPACE_BAR       4
+#define TPCI200_MEM8_SPACE_BAR        5
+
+#define TPCI200_REVISION_REG          0x00
+#define TPCI200_CONTROL_A_REG         0x02
+#define TPCI200_CONTROL_B_REG         0x04
+#define TPCI200_CONTROL_C_REG         0x06
+#define TPCI200_CONTROL_D_REG         0x08
+#define TPCI200_RESET_REG             0x0A
+#define TPCI200_STATUS_REG            0x0C
+
+#define TPCI200_IFACE_SIZE            0x100
+
+#define TPCI200_IO_SPACE_OFF          0x0000
+#define TPCI200_IO_SPACE_GAP          0x0100
+#define TPCI200_IO_SPACE_SIZE         0x0080
+#define TPCI200_ID_SPACE_OFF          0x0080
+#define TPCI200_ID_SPACE_GAP          0x0100
+#define TPCI200_ID_SPACE_SIZE         0x0040
+#define TPCI200_INT_SPACE_OFF         0x00C0
+#define TPCI200_INT_SPACE_GAP         0x0100
+#define TPCI200_INT_SPACE_SIZE        0x0040
+#define TPCI200_IOIDINT_SIZE          0x0400
+
+#define TPCI200_MEM8_GAP              0x00400000
+#define TPCI200_MEM8_SIZE             0x00400000
+#define TPCI200_MEM16_GAP             0x00800000
+#define TPCI200_MEM16_SIZE            0x00800000
+
+#define TPCI200_INT0_EN               0x0040
+#define TPCI200_INT1_EN               0x0080
+#define TPCI200_INT0_EDGE             0x0010
+#define TPCI200_INT1_EDGE             0x0020
+#define TPCI200_ERR_INT_EN            0x0008
+#define TPCI200_TIME_INT_EN           0x0004
+#define TPCI200_RECOVER_EN            0x0002
+#define TPCI200_CLK32                 0x0001
+
+#define TPCI200_A_RESET               0x0001
+#define TPCI200_B_RESET               0x0002
+#define TPCI200_C_RESET               0x0004
+#define TPCI200_D_RESET               0x0008
+
+#define TPCI200_A_TIMEOUT             0x1000
+#define TPCI200_B_TIMEOUT             0x2000
+#define TPCI200_C_TIMEOUT             0x4000
+#define TPCI200_D_TIMEOUT             0x8000
+
+#define TPCI200_A_ERROR               0x0100
+#define TPCI200_B_ERROR               0x0200
+#define TPCI200_C_ERROR               0x0400
+#define TPCI200_D_ERROR               0x0800
+
+#define TPCI200_A_INT0                0x0001
+#define TPCI200_A_INT1                0x0002
+#define TPCI200_B_INT0                0x0004
+#define TPCI200_B_INT1                0x0008
+#define TPCI200_C_INT0                0x0010
+#define TPCI200_C_INT1                0x0020
+#define TPCI200_D_INT0                0x0040
+#define TPCI200_D_INT1                0x0080
+
+#define TPCI200_SLOT_INT_MASK         0x00FF
+
+#define VME_IOID_SPACE  "IOID"
+#define VME_MEM_SPACE  "MEM"
+
+/**
+ * struct slot_irq - slot IRQ definition.
+ * @vector	Vector number
+ * @handler	Handler called when IRQ arrives
+ * @arg		Handler argument
+ * @name	IRQ name
+ *
+ */
+struct slot_irq {
+	int		vector;
+	int		(*handler)(void *);
+	void		*arg;
+	const char	*name;
+};
+
+/**
+ * struct tpci200_slot - data specific to the tpci200 slot.
+ * @slot_id	Slot identification gived to external interface
+ * @irq		Slot IRQ infos
+ * @io_phys	IO physical base address register of the slot
+ * @id_phys	ID physical base address register of the slot
+ * @mem_phys	MEM physical base address register of the slot
+ *
+ */
+struct tpci200_slot {
+	struct ipack_device	*dev;
+	struct slot_irq		*irq;
+	struct ipack_addr_space io_phys;
+	struct ipack_addr_space id_phys;
+	struct ipack_addr_space mem_phys;
+};
+
+/**
+ * struct tpci200_infos - informations specific of the TPCI200 tpci200.
+ * @pci_dev		PCI device
+ * @interface_regs	Pointer to IP interface space (Bar 2)
+ * @ioidint_space	Pointer to IP ID, IO and INT space (Bar 3)
+ * @mem8_space		Pointer to MEM space (Bar 4)
+ * @access_lock		Mutex lock for simultaneous access
+ *
+ */
+struct tpci200_infos {
+	struct pci_dev			*pdev;
+	struct pci_device_id		*id_table;
+	void __iomem			*interface_regs;
+	void __iomem			*ioidint_space;
+	void __iomem			*mem8_space;
+	spinlock_t			access_lock;
+	struct ipack_bus_device		*ipack_bus;
+};
+struct tpci200_board {
+	struct list_head	list;
+	unsigned int		number;
+	struct mutex		mutex;
+	struct tpci200_slot	*slots;
+	struct tpci200_infos	*info;
+};
+
+#endif /* _TPCI200_H_ */
diff --git a/drivers/staging/ipack/devices/Kconfig b/drivers/staging/ipack/devices/Kconfig
new file mode 100644
index 000000000000..39f71888a584
--- /dev/null
+++ b/drivers/staging/ipack/devices/Kconfig
@@ -0,0 +1,7 @@
+config SERIAL_IPOCTAL
+	tristate "IndustryPack IP-OCTAL uart support"
+	depends on IPACK_BUS
+	help
+	  This driver supports the IPOCTAL serial port device for the IndustryPack bus.
+	default n
+
diff --git a/drivers/staging/ipack/devices/Makefile b/drivers/staging/ipack/devices/Makefile
new file mode 100644
index 000000000000..6de18bda4a9a
--- /dev/null
+++ b/drivers/staging/ipack/devices/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SERIAL_IPOCTAL) += ipoctal.o
diff --git a/drivers/staging/ipack/devices/ipoctal.c b/drivers/staging/ipack/devices/ipoctal.c
new file mode 100644
index 000000000000..29f6fa841d23
--- /dev/null
+++ b/drivers/staging/ipack/devices/ipoctal.c
@@ -0,0 +1,901 @@
+/**
+ * ipoctal.c
+ *
+ * driver for the GE IP-OCTAL boards
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/atomic.h>
+#include "../ipack.h"
+#include "ipoctal.h"
+#include "scc2698.h"
+
+#define IP_OCTAL_MANUFACTURER_ID    0xF0
+#define IP_OCTAL_232_ID             0x22
+#define IP_OCTAL_422_ID             0x2A
+#define IP_OCTAL_485_ID             0x48
+
+#define IP_OCTAL_ID_SPACE_VECTOR    0x41
+#define IP_OCTAL_NB_BLOCKS          4
+
+static struct ipack_driver driver;
+static const struct tty_operations ipoctal_fops;
+
+struct ipoctal {
+	struct list_head		list;
+	struct ipack_device		*dev;
+	unsigned int			board_id;
+	struct scc2698_channel		*chan_regs;
+	struct scc2698_block		*block_regs;
+	struct ipoctal_stats		chan_stats[NR_CHANNELS];
+	char				*buffer[NR_CHANNELS];
+	unsigned int			nb_bytes[NR_CHANNELS];
+	unsigned int			count_wr[NR_CHANNELS];
+	struct ipoctal_config		chan_config[NR_CHANNELS];
+	wait_queue_head_t		queue[NR_CHANNELS];
+	unsigned short			error_flag[NR_CHANNELS];
+	spinlock_t			lock[NR_CHANNELS];
+	unsigned int			pointer_read[NR_CHANNELS];
+	unsigned int			pointer_write[NR_CHANNELS];
+	atomic_t			open[NR_CHANNELS];
+	unsigned char			write;
+	struct tty_port			tty_port[NR_CHANNELS];
+	struct tty_driver		*tty_drv;
+};
+
+/* Linked list to save the registered devices */
+static LIST_HEAD(ipoctal_list);
+
+static inline void ipoctal_write_io_reg(struct ipoctal *ipoctal,
+					unsigned char *dest,
+					unsigned char value)
+{
+	unsigned long offset;
+
+	offset = ((void __iomem *) dest) - ipoctal->dev->io_space.address;
+	ipoctal->dev->bus->ops->write8(ipoctal->dev, IPACK_IO_SPACE, offset,
+				       value);
+}
+
+static inline void ipoctal_write_cr_cmd(struct ipoctal *ipoctal,
+					unsigned char *dest,
+					unsigned char value)
+{
+	ipoctal_write_io_reg(ipoctal, dest, value);
+}
+
+static inline unsigned char ipoctal_read_io_reg(struct ipoctal *ipoctal,
+						unsigned char *src)
+{
+	unsigned long offset;
+	unsigned char value;
+
+	offset = ((void __iomem *) src) - ipoctal->dev->io_space.address;
+	ipoctal->dev->bus->ops->read8(ipoctal->dev, IPACK_IO_SPACE, offset,
+				      &value);
+	return value;
+}
+
+static struct ipoctal *ipoctal_find_board(struct tty_struct *tty)
+{
+	struct ipoctal *p;
+
+	list_for_each_entry(p, &ipoctal_list, list) {
+		if (tty->driver->major == p->tty_drv->major)
+			return p;
+	}
+
+	return NULL;
+}
+
+static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+	struct ipoctal *ipoctal;
+	int channel = tty->index;
+
+	ipoctal = ipoctal_find_board(tty);
+
+	if (ipoctal == NULL) {
+		pr_err("Device not found. Major %d\n", tty->driver->major);
+		return -ENODEV;
+	}
+
+	ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_ENABLE_RX);
+	tty->driver_data = ipoctal;
+
+	return 0;
+}
+
+static int ipoctal_open(struct tty_struct *tty, struct file *file)
+{
+	int channel = tty->index;
+	int res;
+	struct ipoctal *ipoctal;
+
+	ipoctal = ipoctal_find_board(tty);
+
+	if (ipoctal == NULL) {
+		pr_err("Device not found. Major %d\n", tty->driver->major);
+		return -ENODEV;
+	}
+
+	if (atomic_read(&ipoctal->open[channel]))
+		return -EBUSY;
+
+	res = tty_port_open(&ipoctal->tty_port[channel], tty, file);
+	if (res)
+		return res;
+
+	atomic_inc(&ipoctal->open[channel]);
+	return 0;
+}
+
+static void ipoctal_reset_stats(struct ipoctal_stats *stats)
+{
+	stats->tx = 0;
+	stats->rx = 0;
+	stats->rcv_break = 0;
+	stats->framing_err = 0;
+	stats->overrun_err = 0;
+	stats->parity_err = 0;
+}
+
+static void ipoctal_free_channel(struct tty_struct *tty)
+{
+	int channel = tty->index;
+	struct ipoctal *ipoctal = tty->driver_data;
+
+	if (ipoctal == NULL)
+		return;
+
+	ipoctal_reset_stats(&ipoctal->chan_stats[channel]);
+	ipoctal->pointer_read[channel] = 0;
+	ipoctal->pointer_write[channel] = 0;
+	ipoctal->nb_bytes[channel] = 0;
+}
+
+static void ipoctal_close(struct tty_struct *tty, struct file *filp)
+{
+	int channel = tty->index;
+	struct ipoctal *ipoctal = tty->driver_data;
+
+	tty_port_close(&ipoctal->tty_port[channel], tty, filp);
+
+	if (atomic_dec_and_test(&ipoctal->open[channel]))
+		ipoctal_free_channel(tty);
+}
+
+static int ipoctal_get_icount(struct tty_struct *tty,
+			      struct serial_icounter_struct *icount)
+{
+	struct ipoctal *ipoctal = tty->driver_data;
+	int channel = tty->index;
+
+	icount->cts = 0;
+	icount->dsr = 0;
+	icount->rng = 0;
+	icount->dcd = 0;
+	icount->rx = ipoctal->chan_stats[channel].rx;
+	icount->tx = ipoctal->chan_stats[channel].tx;
+	icount->frame = ipoctal->chan_stats[channel].framing_err;
+	icount->parity = ipoctal->chan_stats[channel].parity_err;
+	icount->brk = ipoctal->chan_stats[channel].rcv_break;
+	return 0;
+}
+
+static int ipoctal_irq_handler(void *arg)
+{
+	unsigned int channel;
+	unsigned int block;
+	unsigned char isr;
+	unsigned char sr;
+	unsigned char isr_tx_rdy, isr_rx_rdy;
+	unsigned char value;
+	unsigned char flag;
+	struct tty_struct *tty;
+	struct ipoctal *ipoctal = (struct ipoctal *) arg;
+
+	/* Check all channels */
+	for (channel = 0; channel < NR_CHANNELS; channel++) {
+		/* If there is no client, skip the check */
+		if (!atomic_read(&ipoctal->open[channel]))
+			continue;
+
+		tty = tty_port_tty_get(&ipoctal->tty_port[channel]);
+		if (!tty)
+			continue;
+
+		/*
+		 * The HW is organized in pair of channels.
+		 * See which register we need to read from
+		 */
+		block = channel / 2;
+		isr = ipoctal_read_io_reg(ipoctal,
+					  &ipoctal->block_regs[block].u.r.isr);
+		sr = ipoctal_read_io_reg(ipoctal,
+					 &ipoctal->chan_regs[channel].u.r.sr);
+
+		if ((channel % 2) == 1) {
+			isr_tx_rdy = isr & ISR_TxRDY_B;
+			isr_rx_rdy = isr & ISR_RxRDY_FFULL_B;
+		} else {
+			isr_tx_rdy = isr & ISR_TxRDY_A;
+			isr_rx_rdy = isr & ISR_RxRDY_FFULL_A;
+		}
+
+		/* In case of RS-485, change from TX to RX when finishing TX.
+		 * Half-duplex.
+		 */
+		if ((ipoctal->board_id == IP_OCTAL_485_ID) &&
+		    (sr & SR_TX_EMPTY) &&
+		    (ipoctal->nb_bytes[channel] == 0)) {
+			ipoctal_write_io_reg(ipoctal,
+					     &ipoctal->chan_regs[channel].u.w.cr,
+					     CR_DISABLE_TX);
+			ipoctal_write_cr_cmd(ipoctal,
+					     &ipoctal->chan_regs[channel].u.w.cr,
+					     CR_CMD_NEGATE_RTSN);
+			ipoctal_write_io_reg(ipoctal,
+					     &ipoctal->chan_regs[channel].u.w.cr,
+					     CR_ENABLE_RX);
+			ipoctal->write = 1;
+			wake_up_interruptible(&ipoctal->queue[channel]);
+		}
+
+		/* RX data */
+		if (isr_rx_rdy && (sr & SR_RX_READY)) {
+			value = ipoctal_read_io_reg(ipoctal,
+						    &ipoctal->chan_regs[channel].u.r.rhr);
+			flag = TTY_NORMAL;
+
+			/* Error: count statistics */
+			if (sr & SR_ERROR) {
+				ipoctal_write_cr_cmd(ipoctal,
+						     &ipoctal->chan_regs[channel].u.w.cr,
+						     CR_CMD_RESET_ERR_STATUS);
+
+				if (sr & SR_OVERRUN_ERROR) {
+					ipoctal->error_flag[channel] |= UART_OVERRUN;
+					ipoctal->chan_stats[channel].overrun_err++;
+					/* Overrun doesn't affect the current character*/
+					tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+				}
+				if (sr & SR_PARITY_ERROR) {
+					ipoctal->error_flag[channel] |= UART_PARITY;
+					ipoctal->chan_stats[channel].parity_err++;
+					flag = TTY_PARITY;
+				}
+				if (sr & SR_FRAMING_ERROR) {
+					ipoctal->error_flag[channel] |= UART_FRAMING;
+					ipoctal->chan_stats[channel].framing_err++;
+					flag = TTY_FRAME;
+				}
+				if (sr & SR_RECEIVED_BREAK) {
+					ipoctal->error_flag[channel] |= UART_BREAK;
+					ipoctal->chan_stats[channel].rcv_break++;
+					flag = TTY_BREAK;
+				}
+			}
+
+			tty_insert_flip_char(tty, value, flag);
+		}
+
+		/* TX of each character */
+		if (isr_tx_rdy && (sr & SR_TX_READY)) {
+			unsigned int *pointer_write =
+				&ipoctal->pointer_write[channel];
+
+			if (ipoctal->nb_bytes[channel] <= 0) {
+				ipoctal->nb_bytes[channel] = 0;
+				continue;
+			}
+			spin_lock(&ipoctal->lock[channel]);
+			value = ipoctal->buffer[channel][*pointer_write];
+			ipoctal_write_io_reg(ipoctal,
+					     &ipoctal->chan_regs[channel].u.w.thr,
+					     value);
+			ipoctal->chan_stats[channel].tx++;
+			ipoctal->count_wr[channel]++;
+			(*pointer_write)++;
+			*pointer_write = *pointer_write % PAGE_SIZE;
+			ipoctal->nb_bytes[channel]--;
+			spin_unlock(&ipoctal->lock[channel]);
+
+			if ((ipoctal->nb_bytes[channel] == 0) &&
+			    (waitqueue_active(&ipoctal->queue[channel]))) {
+
+				if (ipoctal->board_id != IP_OCTAL_485_ID) {
+					ipoctal->write = 1;
+					wake_up_interruptible(&ipoctal->queue[channel]);
+				}
+			}
+		}
+
+		tty_flip_buffer_push(tty);
+		tty_kref_put(tty);
+	}
+	return IRQ_HANDLED;
+}
+
+static int ipoctal_check_model(struct ipack_device *dev, unsigned char *id)
+{
+	unsigned char manufacturerID;
+	unsigned char board_id;
+
+	dev->bus->ops->read8(dev, IPACK_ID_SPACE,
+			IPACK_IDPROM_OFFSET_MANUFACTURER_ID, &manufacturerID);
+	if (manufacturerID != IP_OCTAL_MANUFACTURER_ID)
+		return -ENODEV;
+
+	dev->bus->ops->read8(dev, IPACK_ID_SPACE,
+			IPACK_IDPROM_OFFSET_MODEL, (unsigned char *)&board_id);
+
+	switch (board_id) {
+	case IP_OCTAL_232_ID:
+	case IP_OCTAL_422_ID:
+	case IP_OCTAL_485_ID:
+		*id = board_id;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct tty_port_operations ipoctal_tty_port_ops = {
+	.dtr_rts = NULL,
+	.activate = ipoctal_port_activate,
+};
+
+static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr,
+			     unsigned int slot, unsigned int vector)
+{
+	int res = 0;
+	int i;
+	struct tty_driver *tty;
+	char name[20];
+	unsigned char board_id;
+
+	res = ipoctal->dev->bus->ops->map_space(ipoctal->dev, 0,
+						IPACK_ID_SPACE);
+	if (res) {
+		pr_err("Unable to map slot [%d:%d] ID space!\n", bus_nr, slot);
+		return res;
+	}
+
+	res = ipoctal_check_model(ipoctal->dev, &board_id);
+	if (res) {
+		ipoctal->dev->bus->ops->unmap_space(ipoctal->dev,
+						    IPACK_ID_SPACE);
+		goto out_unregister_id_space;
+	}
+	ipoctal->board_id = board_id;
+
+	res = ipoctal->dev->bus->ops->map_space(ipoctal->dev, 0,
+						IPACK_IO_SPACE);
+	if (res) {
+		pr_err("Unable to map slot [%d:%d] IO space!\n", bus_nr, slot);
+		goto out_unregister_id_space;
+	}
+
+	res = ipoctal->dev->bus->ops->map_space(ipoctal->dev,
+					   0x8000, IPACK_MEM_SPACE);
+	if (res) {
+		pr_err("Unable to map slot [%d:%d] MEM space!\n", bus_nr, slot);
+		goto out_unregister_io_space;
+	}
+
+	/* Save the virtual address to access the registers easily */
+	ipoctal->chan_regs =
+		(struct scc2698_channel *) ipoctal->dev->io_space.address;
+	ipoctal->block_regs =
+		(struct scc2698_block *) ipoctal->dev->io_space.address;
+
+	/* Disable RX and TX before touching anything */
+	for (i = 0; i < NR_CHANNELS ; i++) {
+		ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[i].u.w.cr,
+				     CR_DISABLE_RX | CR_DISABLE_TX);
+	}
+
+	for (i = 0; i < IP_OCTAL_NB_BLOCKS; i++) {
+		ipoctal_write_io_reg(ipoctal,
+				     &ipoctal->block_regs[i].u.w.acr,
+				     ACR_BRG_SET2);
+		ipoctal_write_io_reg(ipoctal,
+				     &ipoctal->block_regs[i].u.w.opcr,
+				     OPCR_MPP_OUTPUT | OPCR_MPOa_RTSN |
+				     OPCR_MPOb_RTSN);
+		ipoctal_write_io_reg(ipoctal,
+				     &ipoctal->block_regs[i].u.w.imr,
+				     IMR_TxRDY_A | IMR_RxRDY_FFULL_A |
+				     IMR_DELTA_BREAK_A | IMR_TxRDY_B |
+				     IMR_RxRDY_FFULL_B | IMR_DELTA_BREAK_B);
+	}
+
+	/*
+	 * IP-OCTAL has different addresses to copy its IRQ vector.
+	 * Depending of the carrier these addresses are accesible or not.
+	 * More info in the datasheet.
+	 */
+	ipoctal->dev->bus->ops->request_irq(ipoctal->dev, vector,
+				       ipoctal_irq_handler, ipoctal);
+	ipoctal->dev->bus->ops->write8(ipoctal->dev, IPACK_ID_SPACE, 0, vector);
+
+	/* Register the TTY device */
+
+	/* Each IP-OCTAL channel is a TTY port */
+	tty = alloc_tty_driver(NR_CHANNELS);
+
+	if (!tty) {
+		res = -ENOMEM;
+		goto out_unregister_slot_unmap;
+	}
+
+	/* Fill struct tty_driver with ipoctal data */
+	tty->owner = THIS_MODULE;
+	tty->driver_name = "ipoctal";
+	sprintf(name, "ipoctal.%d.%d.", bus_nr, slot);
+	tty->name = name;
+	tty->major = 0;
+
+	tty->minor_start = 0;
+	tty->type = TTY_DRIVER_TYPE_SERIAL;
+	tty->subtype = SERIAL_TYPE_NORMAL;
+	tty->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty->init_termios = tty_std_termios;
+	tty->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->init_termios.c_ispeed = 9600;
+	tty->init_termios.c_ospeed = 9600;
+
+	tty_set_operations(tty, &ipoctal_fops);
+	res = tty_register_driver(tty);
+	if (res) {
+		pr_err("Can't register tty driver.\n");
+		put_tty_driver(tty);
+		goto out_unregister_slot_unmap;
+	}
+
+	/* Save struct tty_driver for use it when uninstalling the device */
+	ipoctal->tty_drv = tty;
+
+	for (i = 0; i < NR_CHANNELS; i++) {
+		tty_port_init(&ipoctal->tty_port[i]);
+		tty_port_alloc_xmit_buf(&ipoctal->tty_port[i]);
+		ipoctal->tty_port[i].ops = &ipoctal_tty_port_ops;
+
+		ipoctal_reset_stats(&ipoctal->chan_stats[i]);
+		ipoctal->nb_bytes[i] = 0;
+		init_waitqueue_head(&ipoctal->queue[i]);
+		ipoctal->error_flag[i] = UART_NOERROR;
+
+		spin_lock_init(&ipoctal->lock[i]);
+		ipoctal->pointer_read[i] = 0;
+		ipoctal->pointer_write[i] = 0;
+		ipoctal->nb_bytes[i] = 0;
+		tty_register_device(tty, i, NULL);
+
+		/*
+		 * Enable again the RX. TX will be enabled when
+		 * there is something to send
+		 */
+		ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[i].u.w.cr,
+				     CR_ENABLE_RX);
+	}
+
+	return 0;
+
+out_unregister_slot_unmap:
+	ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_ID_SPACE);
+out_unregister_io_space:
+	ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_IO_SPACE);
+out_unregister_id_space:
+	ipoctal->dev->bus->ops->unmap_space(ipoctal->dev, IPACK_MEM_SPACE);
+	return res;
+}
+
+static inline int ipoctal_copy_write_buffer(struct ipoctal *ipoctal,
+					    unsigned int channel,
+					    const unsigned char *buf,
+					    int count)
+{
+	unsigned long flags;
+	int i;
+	unsigned int *pointer_read = &ipoctal->pointer_read[channel];
+
+	/* Copy the bytes from the user buffer to the internal one */
+	for (i = 0; i < count; i++) {
+		if (i <= (PAGE_SIZE - ipoctal->nb_bytes[channel])) {
+			spin_lock_irqsave(&ipoctal->lock[channel], flags);
+			ipoctal->tty_port[channel].xmit_buf[*pointer_read] = buf[i];
+			*pointer_read = (*pointer_read + 1) % PAGE_SIZE;
+			ipoctal->nb_bytes[channel]++;
+			spin_unlock_irqrestore(&ipoctal->lock[channel], flags);
+		} else {
+			break;
+		}
+	}
+	return i;
+}
+
+static int ipoctal_write(struct ipoctal *ipoctal, unsigned int channel,
+			 const unsigned char *buf, int count)
+{
+	ipoctal->nb_bytes[channel] = 0;
+	ipoctal->count_wr[channel] = 0;
+
+	ipoctal_copy_write_buffer(ipoctal, channel, buf, count);
+
+	ipoctal->error_flag[channel] = UART_NOERROR;
+
+	/* As the IP-OCTAL 485 only supports half duplex, do it manually */
+	if (ipoctal->board_id == IP_OCTAL_485_ID) {
+		ipoctal_write_io_reg(ipoctal,
+				     &ipoctal->chan_regs[channel].u.w.cr,
+				     CR_DISABLE_RX);
+		ipoctal_write_cr_cmd(ipoctal,
+				     &ipoctal->chan_regs[channel].u.w.cr,
+				     CR_CMD_ASSERT_RTSN);
+	}
+
+	/*
+	 * Send a packet and then disable TX to avoid failure after several send
+	 * operations
+	 */
+	ipoctal_write_io_reg(ipoctal,
+			     &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_ENABLE_TX);
+	wait_event_interruptible(ipoctal->queue[channel], ipoctal->write);
+	ipoctal_write_io_reg(ipoctal,
+			     &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_DISABLE_TX);
+
+	ipoctal->write = 0;
+	return ipoctal->count_wr[channel];
+}
+
+static int ipoctal_write_tty(struct tty_struct *tty,
+			     const unsigned char *buf, int count)
+{
+	unsigned int channel = tty->index;
+	struct ipoctal *ipoctal = tty->driver_data;
+
+	return ipoctal_write(ipoctal, channel, buf, count);
+}
+
+static int ipoctal_write_room(struct tty_struct *tty)
+{
+	int channel = tty->index;
+	struct ipoctal *ipoctal = tty->driver_data;
+
+	return PAGE_SIZE - ipoctal->nb_bytes[channel];
+}
+
+static int ipoctal_chars_in_buffer(struct tty_struct *tty)
+{
+	int channel = tty->index;
+	struct ipoctal *ipoctal = tty->driver_data;
+
+	return ipoctal->nb_bytes[channel];
+}
+
+static void ipoctal_set_termios(struct tty_struct *tty,
+				struct ktermios *old_termios)
+{
+	unsigned int cflag;
+	unsigned char mr1 = 0;
+	unsigned char mr2 = 0;
+	unsigned char csr = 0;
+	unsigned int channel = tty->index;
+	struct ipoctal *ipoctal = tty->driver_data;
+	speed_t baud;
+
+	cflag = tty->termios->c_cflag;
+
+	/* Disable and reset everything before change the setup */
+	ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_DISABLE_RX | CR_DISABLE_TX);
+	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_CMD_RESET_RX);
+	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_CMD_RESET_TX);
+	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_CMD_RESET_ERR_STATUS);
+	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_CMD_RESET_MR);
+
+	/* Set Bits per chars */
+	switch (cflag & CSIZE) {
+	case CS6:
+		mr1 |= MR1_CHRL_6_BITS;
+		break;
+	case CS7:
+		mr1 |= MR1_CHRL_7_BITS;
+		break;
+	case CS8:
+	default:
+		mr1 |= MR1_CHRL_8_BITS;
+		/* By default, select CS8 */
+		tty->termios->c_cflag = (cflag & ~CSIZE) | CS8;
+		break;
+	}
+
+	/* Set Parity */
+	if (cflag & PARENB)
+		if (cflag & PARODD)
+			mr1 |= MR1_PARITY_ON | MR1_PARITY_ODD;
+		else
+			mr1 |= MR1_PARITY_ON | MR1_PARITY_EVEN;
+	else
+		mr1 |= MR1_PARITY_OFF;
+
+	/* Mark or space parity is not supported */
+	tty->termios->c_cflag &= ~CMSPAR;
+
+	/* Set stop bits */
+	if (cflag & CSTOPB)
+		mr2 |= MR2_STOP_BITS_LENGTH_2;
+	else
+		mr2 |= MR2_STOP_BITS_LENGTH_1;
+
+	/* Set the flow control */
+	switch (ipoctal->board_id) {
+	case IP_OCTAL_232_ID:
+		if (cflag & CRTSCTS) {
+			mr1 |= MR1_RxRTS_CONTROL_ON;
+			mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON;
+			ipoctal->chan_config[channel].flow_control = 1;
+		} else {
+			mr1 |= MR1_RxRTS_CONTROL_OFF;
+			mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+			ipoctal->chan_config[channel].flow_control = 0;
+		}
+		break;
+	case IP_OCTAL_422_ID:
+		mr1 |= MR1_RxRTS_CONTROL_OFF;
+		mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+		ipoctal->chan_config[channel].flow_control = 0;
+		break;
+	case IP_OCTAL_485_ID:
+		mr1 |= MR1_RxRTS_CONTROL_OFF;
+		mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF;
+		ipoctal->chan_config[channel].flow_control = 0;
+		break;
+	default:
+		return;
+		break;
+	}
+
+	baud = tty_get_baud_rate(tty);
+	tty_termios_encode_baud_rate(tty->termios, baud, baud);
+
+	/* Set baud rate */
+	switch (tty->termios->c_ospeed) {
+	case 75:
+		csr |= TX_CLK_75 | RX_CLK_75;
+		break;
+	case 110:
+		csr |= TX_CLK_110 | RX_CLK_110;
+		break;
+	case 150:
+		csr |= TX_CLK_150 | RX_CLK_150;
+		break;
+	case 300:
+		csr |= TX_CLK_300 | RX_CLK_300;
+		break;
+	case 600:
+		csr |= TX_CLK_600 | RX_CLK_600;
+		break;
+	case 1200:
+		csr |= TX_CLK_1200 | RX_CLK_1200;
+		break;
+	case 1800:
+		csr |= TX_CLK_1800 | RX_CLK_1800;
+		break;
+	case 2000:
+		csr |= TX_CLK_2000 | RX_CLK_2000;
+		break;
+	case 2400:
+		csr |= TX_CLK_2400 | RX_CLK_2400;
+		break;
+	case 4800:
+		csr |= TX_CLK_4800  | RX_CLK_4800;
+		break;
+	case 9600:
+		csr |= TX_CLK_9600  | RX_CLK_9600;
+		break;
+	case 19200:
+		csr |= TX_CLK_19200 | RX_CLK_19200;
+		break;
+	case 38400:
+	default:
+		csr |= TX_CLK_38400 | RX_CLK_38400;
+		/* In case of default, we establish 38400 bps */
+		tty_termios_encode_baud_rate(tty->termios, 38400, 38400);
+		break;
+	}
+
+	mr1 |= MR1_ERROR_CHAR;
+	mr1 |= MR1_RxINT_RxRDY;
+
+	/* Write the control registers */
+	ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.mr, mr1);
+	ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.mr, mr2);
+	ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.csr, csr);
+
+	/* save the setup in the structure */
+	ipoctal->chan_config[channel].baud = tty_get_baud_rate(tty);
+	ipoctal->chan_config[channel].bits_per_char = cflag & CSIZE;
+	ipoctal->chan_config[channel].parity = cflag & PARENB;
+	ipoctal->chan_config[channel].stop_bits = cflag & CSTOPB;
+
+	/* Enable again the RX */
+	ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_ENABLE_RX);
+}
+
+static void ipoctal_hangup(struct tty_struct *tty)
+{
+	unsigned long flags;
+	int channel = tty->index;
+	struct ipoctal *ipoctal = tty->driver_data;
+
+	if (ipoctal == NULL)
+		return;
+
+	spin_lock_irqsave(&ipoctal->lock[channel], flags);
+	ipoctal->nb_bytes[channel] = 0;
+	ipoctal->pointer_read[channel] = 0;
+	ipoctal->pointer_write[channel] = 0;
+	spin_unlock_irqrestore(&ipoctal->lock[channel], flags);
+
+	tty_port_hangup(&ipoctal->tty_port[channel]);
+
+	ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_DISABLE_RX | CR_DISABLE_TX);
+	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_CMD_RESET_RX);
+	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_CMD_RESET_TX);
+	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_CMD_RESET_ERR_STATUS);
+	ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+			     CR_CMD_RESET_MR);
+
+	clear_bit(ASYNCB_INITIALIZED, &ipoctal->tty_port[channel].flags);
+	wake_up_interruptible(&ipoctal->tty_port[channel].open_wait);
+}
+
+static const struct tty_operations ipoctal_fops = {
+	.ioctl =		NULL,
+	.open =			ipoctal_open,
+	.close =		ipoctal_close,
+	.write =		ipoctal_write_tty,
+	.set_termios =		ipoctal_set_termios,
+	.write_room =		ipoctal_write_room,
+	.chars_in_buffer =	ipoctal_chars_in_buffer,
+	.get_icount =		ipoctal_get_icount,
+	.hangup =		ipoctal_hangup,
+};
+
+static int ipoctal_match(struct ipack_device *dev)
+{
+	int res;
+	unsigned char board_id;
+
+	if ((!dev->bus->ops) || (!dev->bus->ops->map_space) ||
+	    (!dev->bus->ops->unmap_space))
+		return 0;
+
+	res = dev->bus->ops->map_space(dev, 0, IPACK_ID_SPACE);
+	if (res)
+		return 0;
+
+	res = ipoctal_check_model(dev, &board_id);
+	dev->bus->ops->unmap_space(dev, IPACK_ID_SPACE);
+	if (!res)
+		return 1;
+
+	return 0;
+}
+
+static int ipoctal_probe(struct ipack_device *dev)
+{
+	int res;
+	struct ipoctal *ipoctal;
+
+	ipoctal = kzalloc(sizeof(struct ipoctal), GFP_KERNEL);
+	if (ipoctal == NULL)
+		return -ENOMEM;
+
+	ipoctal->dev = dev;
+	res = ipoctal_inst_slot(ipoctal, dev->bus_nr, dev->slot, dev->irq);
+	if (res)
+		goto out_uninst;
+
+	list_add_tail(&ipoctal->list, &ipoctal_list);
+	return 0;
+
+out_uninst:
+	kfree(ipoctal);
+	return res;
+}
+
+static void __ipoctal_remove(struct ipoctal *ipoctal)
+{
+	int i;
+
+	for (i = 0; i < NR_CHANNELS; i++) {
+		tty_unregister_device(ipoctal->tty_drv, i);
+		tty_port_free_xmit_buf(&ipoctal->tty_port[i]);
+	}
+
+	tty_unregister_driver(ipoctal->tty_drv);
+	put_tty_driver(ipoctal->tty_drv);
+
+	/* Tell the carrier board to free all the resources for this device */
+	if (ipoctal->dev->bus->ops->remove_device != NULL)
+		ipoctal->dev->bus->ops->remove_device(ipoctal->dev);
+
+	list_del(&ipoctal->list);
+	kfree(ipoctal);
+}
+
+static void ipoctal_remove(struct ipack_device *device)
+{
+	struct ipoctal *ipoctal, *next;
+
+	list_for_each_entry_safe(ipoctal, next, &ipoctal_list, list) {
+		if (ipoctal->dev == device)
+			__ipoctal_remove(ipoctal);
+	}
+}
+
+static struct ipack_driver_ops ipoctal_drv_ops = {
+	.match = ipoctal_match,
+	.probe = ipoctal_probe,
+	.remove = ipoctal_remove,
+};
+
+static int __init ipoctal_init(void)
+{
+	driver.ops = &ipoctal_drv_ops;
+	return ipack_driver_register(&driver, THIS_MODULE, KBUILD_MODNAME);
+}
+
+static void __exit ipoctal_exit(void)
+{
+	struct ipoctal *p, *next;
+
+	list_for_each_entry_safe(p, next, &ipoctal_list, list)
+		__ipoctal_remove(p);
+
+	ipack_driver_unregister(&driver);
+}
+
+MODULE_DESCRIPTION("IP-Octal 232, 422 and 485 device driver");
+MODULE_LICENSE("GPL");
+
+module_init(ipoctal_init);
+module_exit(ipoctal_exit);
diff --git a/drivers/staging/ipack/devices/ipoctal.h b/drivers/staging/ipack/devices/ipoctal.h
new file mode 100644
index 000000000000..266f3617069d
--- /dev/null
+++ b/drivers/staging/ipack/devices/ipoctal.h
@@ -0,0 +1,80 @@
+/**
+ * ipoctal.h
+ *
+ * driver for the IPOCTAL boards
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#ifndef _IPOCTAL_H
+#define _IPOCTAL_H_
+
+#define NR_CHANNELS		8
+#define IPOCTAL_MAX_BOARDS	16
+#define MAX_DEVICES		(NR_CHANNELS * IPOCTAL_MAX_BOARDS)
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/**
+ * enum uart_parity_e - UART supported parity.
+ */
+enum uart_parity_e {
+	UART_NONE  = 0,
+	UART_ODD   = 1,
+	UART_EVEN  = 2,
+};
+
+/**
+ * enum uart_error - UART error type
+ *
+ */
+enum uart_error	{
+	UART_NOERROR = 0,      /* No error during transmission */
+	UART_TIMEOUT = 1 << 0, /* Timeout error */
+	UART_OVERRUN = 1 << 1, /* Overrun error */
+	UART_PARITY  = 1 << 2, /* Parity error */
+	UART_FRAMING = 1 << 3, /* Framing error */
+	UART_BREAK   = 1 << 4, /* Received break */
+};
+
+/**
+ * struct ipoctal_config - Serial configuration
+ *
+ * @baud: Baud rate
+ * @stop_bits: Stop bits (1 or 2)
+ * @bits_per_char: data size in bits
+ * @parity
+ * @flow_control: Flow control management (RTS/CTS) (0 disabled, 1 enabled)
+ */
+struct ipoctal_config {
+	unsigned int baud;
+	unsigned int stop_bits;
+	unsigned int bits_per_char;
+	unsigned short parity;
+	unsigned int flow_control;
+};
+
+/**
+ * struct ipoctal_stats -- Stats since last reset
+ *
+ * @tx: Number of transmitted bytes
+ * @rx: Number of received bytes
+ * @overrun: Number of overrun errors
+ * @parity_err: Number of parity errors
+ * @framing_err: Number of framing errors
+ * @rcv_break: Number of break received
+ */
+struct ipoctal_stats {
+	unsigned long tx;
+	unsigned long rx;
+	unsigned long overrun_err;
+	unsigned long parity_err;
+	unsigned long framing_err;
+	unsigned long rcv_break;
+};
+
+#endif /* _IPOCTAL_H_ */
diff --git a/drivers/staging/ipack/devices/scc2698.h b/drivers/staging/ipack/devices/scc2698.h
new file mode 100644
index 000000000000..47f6269985fd
--- /dev/null
+++ b/drivers/staging/ipack/devices/scc2698.h
@@ -0,0 +1,228 @@
+/*
+ * scc2698.h
+ *
+ * driver for the IPOCTAL boards
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#ifndef SCC2698_H_
+#define SCC2698_H_
+
+/*
+ * struct scc2698_channel - Channel access to scc2698 IO
+ *
+ * dn value are only spacer.
+ *
+ */
+struct scc2698_channel {
+	union {
+		struct {
+			unsigned char d0, mr;  /* Mode register 1/2*/
+			unsigned char d1, sr;  /* Status register */
+			unsigned char d2, r1;  /* reserved */
+			unsigned char d3, rhr; /* Receive holding register (R) */
+			unsigned char junk[8]; /* other crap for block control */
+		} r; /* Read access */
+		struct {
+			unsigned char d0, mr;  /* Mode register 1/2 */
+			unsigned char d1, csr; /* Clock select register */
+			unsigned char d2, cr;  /* Command register */
+			unsigned char d3, thr; /* Transmit holding register */
+			unsigned char junk[8]; /* other crap for block control */
+		} w; /* Write access */
+	} u;
+};
+
+/*
+ * struct scc2698_block - Block access to scc2698 IO
+ *
+ * The scc2698 contain 4 block.
+ * Each block containt two channel a and b.
+ * dn value are only spacer.
+ *
+ */
+struct scc2698_block {
+	union {
+		struct {
+			unsigned char d0, mra;  /* Mode register 1/2 (a) */
+			unsigned char d1, sra;  /* Status register (a) */
+			unsigned char d2, r1;   /* reserved */
+			unsigned char d3, rhra; /* Receive holding register (a) */
+			unsigned char d4, ipcr; /* Input port change register of block */
+			unsigned char d5, isr;  /* Interrupt status register of block */
+			unsigned char d6, ctur; /* Counter timer upper register of block */
+			unsigned char d7, ctlr; /* Counter timer lower register of block */
+			unsigned char d8, mrb;  /* Mode register 1/2 (b) */
+			unsigned char d9, srb;  /* Status register (b) */
+			unsigned char da, r2;   /* reserved */
+			unsigned char db, rhrb; /* Receive holding register (b) */
+			unsigned char dc, r3;   /* reserved */
+			unsigned char dd, ip;   /* Input port register of block */
+			unsigned char de, ctg;  /* Start counter timer of block */
+			unsigned char df, cts;  /* Stop counter timer of block */
+		} r; /* Read access */
+		struct {
+			unsigned char d0, mra;  /* Mode register 1/2 (a) */
+			unsigned char d1, csra; /* Clock select register (a) */
+			unsigned char d2, cra;  /* Command register (a) */
+			unsigned char d3, thra; /* Transmit holding register (a) */
+			unsigned char d4, acr;  /* Auxiliary control register of block */
+			unsigned char d5, imr;  /* Interrupt mask register of block  */
+			unsigned char d6, ctu;  /* Counter timer upper register of block */
+			unsigned char d7, ctl;  /* Counter timer lower register of block */
+			unsigned char d8, mrb;  /* Mode register 1/2 (b) */
+			unsigned char d9, csrb; /* Clock select register (a) */
+			unsigned char da, crb;  /* Command register (b) */
+			unsigned char db, thrb; /* Transmit holding register (b) */
+			unsigned char dc, r1;   /* reserved */
+			unsigned char dd, opcr; /* Output port configuration register of block */
+			unsigned char de, r2;   /* reserved */
+			unsigned char df, r3;   /* reserved */
+		} w; /* Write access */
+	} u;
+} ;
+
+#define MR1_CHRL_5_BITS             (0x0 << 0)
+#define MR1_CHRL_6_BITS             (0x1 << 0)
+#define MR1_CHRL_7_BITS             (0x2 << 0)
+#define MR1_CHRL_8_BITS             (0x3 << 0)
+#define MR1_PARITY_EVEN             (0x1 << 2)
+#define MR1_PARITY_ODD              (0x0 << 2)
+#define MR1_PARITY_ON               (0x0 << 3)
+#define MR1_PARITY_FORCE            (0x1 << 3)
+#define MR1_PARITY_OFF              (0x2 << 3)
+#define MR1_PARITY_SPECIAL          (0x3 << 3)
+#define MR1_ERROR_CHAR              (0x0 << 5)
+#define MR1_ERROR_BLOCK             (0x1 << 5)
+#define MR1_RxINT_RxRDY             (0x0 << 6)
+#define MR1_RxINT_FFULL             (0x1 << 6)
+#define MR1_RxRTS_CONTROL_ON        (0x1 << 7)
+#define MR1_RxRTS_CONTROL_OFF       (0x0 << 7)
+
+#define MR2_STOP_BITS_LENGTH_1      (0x7 << 0)
+#define MR2_STOP_BITS_LENGTH_2      (0xF << 0)
+#define MR2_CTS_ENABLE_TX_ON        (0x1 << 4)
+#define MR2_CTS_ENABLE_TX_OFF       (0x0 << 4)
+#define MR2_TxRTS_CONTROL_ON        (0x1 << 5)
+#define MR2_TxRTS_CONTROL_OFF       (0x0 << 5)
+#define MR2_CH_MODE_NORMAL          (0x0 << 6)
+#define MR2_CH_MODE_ECHO            (0x1 << 6)
+#define MR2_CH_MODE_LOCAL           (0x2 << 6)
+#define MR2_CH_MODE_REMOTE          (0x3 << 6)
+
+#define CR_ENABLE_RX                (0x1 << 0)
+#define CR_DISABLE_RX               (0x1 << 1)
+#define CR_ENABLE_TX                (0x1 << 2)
+#define CR_DISABLE_TX               (0x1 << 3)
+#define CR_CMD_RESET_MR             (0x1 << 4)
+#define CR_CMD_RESET_RX             (0x2 << 4)
+#define CR_CMD_RESET_TX             (0x3 << 4)
+#define CR_CMD_RESET_ERR_STATUS     (0x4 << 4)
+#define CR_CMD_RESET_BREAK_CHANGE   (0x5 << 4)
+#define CR_CMD_START_BREAK          (0x6 << 4)
+#define CR_CMD_STOP_BREAK           (0x7 << 4)
+#define CR_CMD_ASSERT_RTSN          (0x8 << 4)
+#define CR_CMD_NEGATE_RTSN          (0x9 << 4)
+#define CR_CMD_SET_TIMEOUT_MODE     (0xA << 4)
+#define CR_CMD_DISABLE_TIMEOUT_MODE (0xC << 4)
+
+#define SR_RX_READY                 (0x1 << 0)
+#define SR_FIFO_FULL                (0x1 << 1)
+#define SR_TX_READY                 (0x1 << 2)
+#define SR_TX_EMPTY                 (0x1 << 3)
+#define SR_OVERRUN_ERROR            (0x1 << 4)
+#define SR_PARITY_ERROR             (0x1 << 5)
+#define SR_FRAMING_ERROR            (0x1 << 6)
+#define SR_RECEIVED_BREAK           (0x1 << 7)
+
+#define SR_ERROR                    (0xF0)
+
+#define ACR_DELTA_IP0_IRQ_EN        (0x1 << 0)
+#define ACR_DELTA_IP1_IRQ_EN        (0x1 << 1)
+#define ACR_DELTA_IP2_IRQ_EN        (0x1 << 2)
+#define ACR_DELTA_IP3_IRQ_EN        (0x1 << 3)
+#define ACR_CT_Mask                 (0x7 << 4)
+#define ACR_CExt                    (0x0 << 4)
+#define ACR_CTxCA                   (0x1 << 4)
+#define ACR_CTxCB                   (0x2 << 4)
+#define ACR_CClk16                  (0x3 << 4)
+#define ACR_TExt                    (0x4 << 4)
+#define ACR_TExt16                  (0x5 << 4)
+#define ACR_TClk                    (0x6 << 4)
+#define ACR_TClk16                  (0x7 << 4)
+#define ACR_BRG_SET1                (0x0 << 7)
+#define ACR_BRG_SET2                (0x1 << 7)
+
+#define TX_CLK_75                   (0x0 << 0)
+#define TX_CLK_110                  (0x1 << 0)
+#define TX_CLK_38400                (0x2 << 0)
+#define TX_CLK_150                  (0x3 << 0)
+#define TX_CLK_300                  (0x4 << 0)
+#define TX_CLK_600                  (0x5 << 0)
+#define TX_CLK_1200                 (0x6 << 0)
+#define TX_CLK_2000                 (0x7 << 0)
+#define TX_CLK_2400                 (0x8 << 0)
+#define TX_CLK_4800                 (0x9 << 0)
+#define TX_CLK_1800                 (0xA << 0)
+#define TX_CLK_9600                 (0xB << 0)
+#define TX_CLK_19200                (0xC << 0)
+#define RX_CLK_75                   (0x0 << 4)
+#define RX_CLK_110                  (0x1 << 4)
+#define RX_CLK_38400                (0x2 << 4)
+#define RX_CLK_150                  (0x3 << 4)
+#define RX_CLK_300                  (0x4 << 4)
+#define RX_CLK_600                  (0x5 << 4)
+#define RX_CLK_1200                 (0x6 << 4)
+#define RX_CLK_2000                 (0x7 << 4)
+#define RX_CLK_2400                 (0x8 << 4)
+#define RX_CLK_4800                 (0x9 << 4)
+#define RX_CLK_1800                 (0xA << 4)
+#define RX_CLK_9600                 (0xB << 4)
+#define RX_CLK_19200                (0xC << 4)
+
+#define OPCR_MPOa_RTSN              (0x0 << 0)
+#define OPCR_MPOa_C_TO              (0x1 << 0)
+#define OPCR_MPOa_TxC1X             (0x2 << 0)
+#define OPCR_MPOa_TxC16X            (0x3 << 0)
+#define OPCR_MPOa_RxC1X             (0x4 << 0)
+#define OPCR_MPOa_RxC16X            (0x5 << 0)
+#define OPCR_MPOa_TxRDY             (0x6 << 0)
+#define OPCR_MPOa_RxRDY_FF          (0x7 << 0)
+
+#define OPCR_MPOb_RTSN              (0x0 << 4)
+#define OPCR_MPOb_C_TO              (0x1 << 4)
+#define OPCR_MPOb_TxC1X             (0x2 << 4)
+#define OPCR_MPOb_TxC16X            (0x3 << 4)
+#define OPCR_MPOb_RxC1X             (0x4 << 4)
+#define OPCR_MPOb_RxC16X            (0x5 << 4)
+#define OPCR_MPOb_TxRDY             (0x6 << 4)
+#define OPCR_MPOb_RxRDY_FF          (0x7 << 4)
+
+#define OPCR_MPP_INPUT              (0x0 << 7)
+#define OPCR_MPP_OUTPUT             (0x1 << 7)
+
+#define IMR_TxRDY_A                 (0x1 << 0)
+#define IMR_RxRDY_FFULL_A           (0x1 << 1)
+#define IMR_DELTA_BREAK_A           (0x1 << 2)
+#define IMR_COUNTER_READY           (0x1 << 3)
+#define IMR_TxRDY_B                 (0x1 << 4)
+#define IMR_RxRDY_FFULL_B           (0x1 << 5)
+#define IMR_DELTA_BREAK_B           (0x1 << 6)
+#define IMR_INPUT_PORT_CHANGE       (0x1 << 7)
+
+#define ISR_TxRDY_A                 (0x1 << 0)
+#define ISR_RxRDY_FFULL_A           (0x1 << 1)
+#define ISR_DELTA_BREAK_A           (0x1 << 2)
+#define ISR_COUNTER_READY           (0x1 << 3)
+#define ISR_TxRDY_B                 (0x1 << 4)
+#define ISR_RxRDY_FFULL_B           (0x1 << 5)
+#define ISR_DELTA_BREAK_B           (0x1 << 6)
+#define ISR_INPUT_PORT_CHANGE       (0x1 << 7)
+
+#endif /* SCC2698_H_ */
diff --git a/drivers/staging/ipack/ipack.c b/drivers/staging/ipack/ipack.c
new file mode 100644
index 000000000000..2b4fa51bf167
--- /dev/null
+++ b/drivers/staging/ipack/ipack.c
@@ -0,0 +1,205 @@
+/*
+ * Industry-pack bus support functions.
+ *
+ * (C) 2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
+ * (C) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include "ipack.h"
+
+#define to_ipack_dev(device) container_of(device, struct ipack_device, dev)
+#define to_ipack_driver(drv) container_of(drv, struct ipack_driver, driver)
+
+/* used when allocating bus numbers */
+#define IPACK_MAXBUS              64
+
+static DEFINE_MUTEX(ipack_mutex);
+
+struct ipack_busmap {
+	unsigned long busmap[IPACK_MAXBUS / (8*sizeof(unsigned long))];
+};
+static struct ipack_busmap busmap;
+
+static void ipack_device_release(struct device *dev)
+{
+	struct ipack_device *device = to_ipack_dev(dev);
+	kfree(device);
+}
+
+static int ipack_bus_match(struct device *device, struct device_driver *driver)
+{
+	int ret;
+	struct ipack_device *dev = to_ipack_dev(device);
+	struct ipack_driver *drv = to_ipack_driver(driver);
+
+	if ((!drv->ops) || (!drv->ops->match))
+		return -EINVAL;
+
+	ret = drv->ops->match(dev);
+	if (ret)
+		dev->driver = drv;
+
+	return 0;
+}
+
+static int ipack_bus_probe(struct device *device)
+{
+	struct ipack_device *dev = to_ipack_dev(device);
+
+	if (!dev->driver->ops->probe)
+		return -EINVAL;
+
+	return dev->driver->ops->probe(dev);
+}
+
+static int ipack_bus_remove(struct device *device)
+{
+	struct ipack_device *dev = to_ipack_dev(device);
+
+	if (!dev->driver->ops->remove)
+		return -EINVAL;
+
+	dev->driver->ops->remove(dev);
+	return 0;
+}
+
+static struct bus_type ipack_bus_type = {
+	.name  = "ipack",
+	.probe = ipack_bus_probe,
+	.match = ipack_bus_match,
+	.remove = ipack_bus_remove,
+};
+
+static int ipack_assign_bus_number(void)
+{
+	int busnum;
+
+	mutex_lock(&ipack_mutex);
+	busnum = find_next_zero_bit(busmap.busmap, IPACK_MAXBUS, 1);
+
+	if (busnum >= IPACK_MAXBUS) {
+		pr_err("too many buses\n");
+		busnum = -1;
+		goto error_find_busnum;
+	}
+
+	set_bit(busnum, busmap.busmap);
+
+error_find_busnum:
+	mutex_unlock(&ipack_mutex);
+	return busnum;
+}
+
+struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots,
+					    struct ipack_bus_ops *ops)
+{
+	int bus_nr;
+	struct ipack_bus_device *bus;
+
+	bus = kzalloc(sizeof(struct ipack_bus_device), GFP_KERNEL);
+	if (!bus)
+		return NULL;
+
+	bus_nr = ipack_assign_bus_number();
+	if (bus_nr < 0) {
+		kfree(bus);
+		return NULL;
+	}
+
+	bus->bus_nr = bus_nr;
+	bus->parent = parent;
+	bus->slots = slots;
+	bus->ops = ops;
+	return bus;
+}
+EXPORT_SYMBOL_GPL(ipack_bus_register);
+
+int ipack_bus_unregister(struct ipack_bus_device *bus)
+{
+	mutex_lock(&ipack_mutex);
+	clear_bit(bus->bus_nr, busmap.busmap);
+	mutex_unlock(&ipack_mutex);
+	kfree(bus);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ipack_bus_unregister);
+
+int ipack_driver_register(struct ipack_driver *edrv, struct module *owner,
+			  char *name)
+{
+	edrv->driver.owner = owner;
+	edrv->driver.name = name;
+	edrv->driver.bus = &ipack_bus_type;
+	return driver_register(&edrv->driver);
+}
+EXPORT_SYMBOL_GPL(ipack_driver_register);
+
+void ipack_driver_unregister(struct ipack_driver *edrv)
+{
+	driver_unregister(&edrv->driver);
+}
+EXPORT_SYMBOL_GPL(ipack_driver_unregister);
+
+struct ipack_device *ipack_device_register(struct ipack_bus_device *bus,
+					   int slot, int irqv)
+{
+	int ret;
+	struct ipack_device *dev;
+
+	dev = kzalloc(sizeof(struct ipack_device), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	dev->dev.bus = &ipack_bus_type;
+	dev->dev.release = ipack_device_release;
+	dev->dev.parent = bus->parent;
+	dev->slot = slot;
+	dev->bus_nr = bus->bus_nr;
+	dev->irq = irqv;
+	dev->bus = bus;
+	dev_set_name(&dev->dev,
+		     "ipack-dev.%u.%u", dev->bus_nr, dev->slot);
+
+	ret = device_register(&dev->dev);
+	if (ret < 0) {
+		pr_err("error registering the device.\n");
+		dev->driver->ops->remove(dev);
+		kfree(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+EXPORT_SYMBOL_GPL(ipack_device_register);
+
+void ipack_device_unregister(struct ipack_device *dev)
+{
+	device_unregister(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(ipack_device_unregister);
+
+static int __init ipack_init(void)
+{
+	return bus_register(&ipack_bus_type);
+}
+
+static void __exit ipack_exit(void)
+{
+	bus_unregister(&ipack_bus_type);
+}
+
+module_init(ipack_init);
+module_exit(ipack_exit);
+
+MODULE_AUTHOR("Samuel Iglesias Gonsalvez <siglesias@igalia.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Industry-pack bus core");
diff --git a/drivers/staging/ipack/ipack.h b/drivers/staging/ipack/ipack.h
new file mode 100644
index 000000000000..8bc001e3ca4e
--- /dev/null
+++ b/drivers/staging/ipack/ipack.h
@@ -0,0 +1,183 @@
+/*
+ * Industry-pack bus.
+ *
+ * (C) 2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
+ * (C) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/device.h>
+
+#define IPACK_IDPROM_OFFSET_I			0x01
+#define IPACK_IDPROM_OFFSET_P			0x03
+#define IPACK_IDPROM_OFFSET_A			0x05
+#define IPACK_IDPROM_OFFSET_C			0x07
+#define IPACK_IDPROM_OFFSET_MANUFACTURER_ID	0x09
+#define IPACK_IDPROM_OFFSET_MODEL		0x0B
+#define IPACK_IDPROM_OFFSET_REVISION		0x0D
+#define IPACK_IDPROM_OFFSET_RESERVED		0x0F
+#define IPACK_IDPROM_OFFSET_DRIVER_ID_L		0x11
+#define IPACK_IDPROM_OFFSET_DRIVER_ID_H		0x13
+#define IPACK_IDPROM_OFFSET_NUM_BYTES		0x15
+#define IPACK_IDPROM_OFFSET_CRC			0x17
+
+struct ipack_bus_ops;
+struct ipack_driver;
+
+enum ipack_space {
+	IPACK_IO_SPACE    = 0,
+	IPACK_ID_SPACE    = 1,
+	IPACK_MEM_SPACE   = 2,
+};
+
+/**
+ *	struct ipack_addr_space - Virtual address space mapped for a specified type.
+ *
+ *	@address: virtual address
+ *	@size: size of the mapped space
+ */
+struct ipack_addr_space {
+	void __iomem *address;
+	unsigned int size;
+};
+
+/**
+ *	struct ipack_device
+ *
+ *	@bus_nr: IP bus number where the device is plugged
+ *	@slot: Slot where the device is plugged in the carrier board
+ *	@irq: IRQ vector
+ *	@driver: Pointer to the ipack_driver that manages the device
+ *	@bus: ipack_bus_device where the device is plugged to.
+ *	@id_space: Virtual address to ID space.
+ *	@io_space: Virtual address to IO space.
+ *	@mem_space: Virtual address to MEM space.
+ *	@dev: device in kernel representation.
+ *
+ * Warning: Direct access to mapped memory is possible but the endianness
+ * is not the same with PCI carrier or VME carrier. The endianness is managed
+ * by the carrier board throught bus->ops.
+ */
+struct ipack_device {
+	unsigned int bus_nr;
+	unsigned int slot;
+	unsigned int irq;
+	struct ipack_driver *driver;
+	struct ipack_bus_device *bus;
+	struct ipack_addr_space id_space;
+	struct ipack_addr_space io_space;
+	struct ipack_addr_space mem_space;
+	struct device dev;
+};
+
+/**
+ *	struct ipack_driver_ops -- callbacks to mezzanine driver for installing/removing one device
+ *
+ *	@match: Match function
+ *	@probe: Probe function
+ *	@remove: tell the driver that the carrier board wants to remove one device
+ */
+
+struct ipack_driver_ops {
+	int (*match) (struct ipack_device *dev);
+	int (*probe) (struct ipack_device *dev);
+	void (*remove) (struct ipack_device *dev);
+};
+
+/**
+ *	struct ipack_driver -- Specific data to each ipack board driver
+ *
+ *	@driver: Device driver kernel representation
+ *	@ops: Mezzanine driver operations specific for the ipack bus.
+ */
+struct ipack_driver {
+	struct device_driver driver;
+	struct ipack_driver_ops *ops;
+};
+
+/**
+ *	struct ipack_bus_ops - available operations on a bridge module
+ *
+ *	@map_space: map IP address space
+ *	@unmap_space: unmap IP address space
+ *	@request_irq: request IRQ
+ *	@free_irq: free IRQ
+ *	@read8: read unsigned char
+ *	@read16: read unsigned short
+ *	@read32: read unsigned int
+ *	@write8: read unsigned char
+ *	@write16: read unsigned short
+ *	@write32: read unsigned int
+ *	@remove_device: tell the bridge module that the device has been removed
+ */
+struct ipack_bus_ops {
+	int (*map_space) (struct ipack_device *dev, unsigned int memory_size, int space);
+	int (*unmap_space) (struct ipack_device *dev, int space);
+	int (*request_irq) (struct ipack_device *dev, int vector, int (*handler)(void *), void *arg);
+	int (*free_irq) (struct ipack_device *dev);
+	int (*read8) (struct ipack_device *dev, int space, unsigned long offset, unsigned char *value);
+	int (*read16) (struct ipack_device *dev, int space, unsigned long offset, unsigned short *value);
+	int (*read32) (struct ipack_device *dev, int space, unsigned long offset, unsigned int *value);
+	int (*write8) (struct ipack_device *dev, int space, unsigned long offset, unsigned char value);
+	int (*write16) (struct ipack_device *dev, int space, unsigned long offset, unsigned short value);
+	int (*write32) (struct ipack_device *dev, int space, unsigned long offset, unsigned int value);
+	int (*remove_device) (struct ipack_device *dev);
+};
+
+/**
+ *	struct ipack_bus_device
+ *
+ *	@dev: pointer to carrier device
+ *	@slots: number of slots available
+ *	@bus_nr: ipack bus number
+ *	@ops: bus operations for the mezzanine drivers
+ */
+struct ipack_bus_device {
+	struct device *parent;
+	int slots;
+	int bus_nr;
+	struct ipack_bus_ops *ops;
+};
+
+/**
+ *	ipack_bus_register -- register a new ipack bus
+ *
+ * @parent: pointer to the parent device, if any.
+ * @slots: number of slots available in the bus device.
+ * @ops: bus operations for the mezzanine drivers.
+ *
+ * The carrier board device should call this function to register itself as
+ * available bus device in ipack.
+ */
+struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots,
+					    struct ipack_bus_ops *ops);
+
+/**
+ *	ipack_bus_unregister -- unregister an ipack bus
+ */
+int ipack_bus_unregister(struct ipack_bus_device *bus);
+
+/**
+ *	ipack_driver_register -- Register a new driver
+ *
+ * Called by a ipack driver to register itself as a driver
+ * that can manage ipack devices.
+ */
+int ipack_driver_register(struct ipack_driver *edrv, struct module *owner, char *name);
+void ipack_driver_unregister(struct ipack_driver *edrv);
+
+/**
+ *	ipack_device_register -- register a new mezzanine device
+ *
+ * @bus: ipack bus device it is plugged to.
+ * @slot: slot position in the bus device.
+ * @irqv: IRQ vector for the mezzanine.
+ *
+ * Register a new ipack device (mezzanine device). The call is done by
+ * the carrier device driver.
+ */
+struct ipack_device *ipack_device_register(struct ipack_bus_device *bus, int slot, int irqv);
+void ipack_device_unregister(struct ipack_device *dev);
diff --git a/drivers/staging/line6/config.h b/drivers/staging/line6/config.h
deleted file mode 100644
index f8a5149e3dad..000000000000
--- a/drivers/staging/line6/config.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Line6 Linux USB driver - 0.8.0
- *
- * Copyright (C) 2004-2009 Markus Grabner (grabner@icg.tugraz.at)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
- */
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG 1
-#endif
-
-
-/*
- * Development tools.
- */
-#define DO_DEBUG_MESSAGES    0
-#define DO_DUMP_URB_SEND     DO_DEBUG_MESSAGES
-#define DO_DUMP_URB_RECEIVE  DO_DEBUG_MESSAGES
-#define DO_DUMP_PCM_SEND     0
-#define DO_DUMP_PCM_RECEIVE  0
-#define DO_DUMP_MIDI_SEND    DO_DEBUG_MESSAGES
-#define DO_DUMP_MIDI_RECEIVE DO_DEBUG_MESSAGES
-#define DO_DUMP_ANY          (DO_DUMP_URB_SEND || DO_DUMP_URB_RECEIVE || \
-			      DO_DUMP_PCM_SEND || DO_DUMP_PCM_RECEIVE || \
-			      DO_DUMP_MIDI_SEND || DO_DUMP_MIDI_RECEIVE)
-#define CREATE_RAW_FILE      0
-
-#if DO_DEBUG_MESSAGES
-#define CHECKPOINT printk(KERN_INFO "line6usb: %s (%s:%d)\n", \
-			  __func__, __FILE__, __LINE__)
-#endif
-
-#if DO_DEBUG_MESSAGES
-#define DEBUG_MESSAGES(x) (x)
-#else
-#define DEBUG_MESSAGES(x)
-#endif
-
-
-#endif
diff --git a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c
index e8023afd3656..4513f78f1127 100644
--- a/drivers/staging/line6/driver.c
+++ b/drivers/staging/line6/driver.c
@@ -92,15 +92,10 @@ const unsigned char line6_midi_id[] = {
 	Code to request version of POD, Variax interface
 	(and maybe other devices).
 */
-static const char line6_request_version0[] = {
+static const char line6_request_version[] = {
 	0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7
 };
 
-/*
-	Copy of version request code with GFP_KERNEL flag for use in URB.
-*/
-static const char *line6_request_version;
-
 struct usb_line6 *line6_devices[LINE6_MAX_DEVICES];
 
 /**
@@ -336,8 +331,21 @@ int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
 */
 int line6_version_request_async(struct usb_line6 *line6)
 {
-	return line6_send_raw_message_async(line6, line6_request_version,
-					    sizeof(line6_request_version0));
+	char *buffer;
+	int retval;
+
+	buffer = kmalloc(sizeof(line6_request_version), GFP_ATOMIC);
+	if (buffer == NULL) {
+		dev_err(line6->ifcdev, "Out of memory");
+		return -ENOMEM;
+	}
+
+	memcpy(buffer, line6_request_version, sizeof(line6_request_version));
+
+	retval = line6_send_raw_message_async(line6, buffer,
+					      sizeof(line6_request_version));
+	kfree(buffer);
+	return retval;
 }
 
 /*
@@ -1292,69 +1300,7 @@ static struct usb_driver line6_driver = {
 	.id_table = line6_id_table,
 };
 
-/*
-	Module initialization.
-*/
-static int __init line6_init(void)
-{
-	int i, retval;
-
-	printk(KERN_INFO "%s driver version %s\n", DRIVER_NAME, DRIVER_VERSION);
-
-	for (i = LINE6_MAX_DEVICES; i--;)
-		line6_devices[i] = NULL;
-
-	retval = usb_register(&line6_driver);
-
-	if (retval) {
-		err("usb_register failed. Error number %d", retval);
-		return retval;
-	}
-
-	line6_request_version = kmalloc(sizeof(line6_request_version0),
-					GFP_KERNEL);
-
-	if (line6_request_version == NULL) {
-		err("Out of memory");
-		return -ENOMEM;
-	}
-
-	memcpy((char *)line6_request_version, line6_request_version0,
-	       sizeof(line6_request_version0));
-
-	return retval;
-}
-
-/*
-	Module cleanup.
-*/
-static void __exit line6_exit(void)
-{
-	int i;
-	struct usb_line6 *line6;
-	struct snd_line6_pcm *line6pcm;
-
-	/* stop all PCM channels */
-	for (i = LINE6_MAX_DEVICES; i--;) {
-		line6 = line6_devices[i];
-
-		if (line6 == NULL)
-			continue;
-
-		line6pcm = line6->line6pcm;
-
-		if (line6pcm == NULL)
-			continue;
-
-		line6_pcm_release(line6pcm, ~0);
-	}
-
-	usb_deregister(&line6_driver);
-	kfree(line6_request_version);
-}
-
-module_init(line6_init);
-module_exit(line6_exit);
+module_usb_driver(line6_driver);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/staging/line6/midi.c b/drivers/staging/line6/midi.c
index 13d02939c3cb..50407294fbd4 100644
--- a/drivers/staging/line6/midi.c
+++ b/drivers/staging/line6/midi.c
@@ -406,7 +406,7 @@ int line6_init_midi(struct usb_line6 *line6)
 
 	line6midi->line6 = line6;
 
-	switch(line6->product) {
+	switch (line6->product) {
 	case LINE6_DEVID_PODHD300:
 	case LINE6_DEVID_PODHD500:
 		line6midi->midi_mask_transmit = 1;
diff --git a/drivers/staging/line6/midibuf.c b/drivers/staging/line6/midibuf.c
index 7b532e5ce8b4..836e8c847c52 100644
--- a/drivers/staging/line6/midibuf.c
+++ b/drivers/staging/line6/midibuf.c
@@ -64,7 +64,7 @@ int line6_midibuf_init(struct MidiBuffer *this, int size, int split)
 
 void line6_midibuf_status(struct MidiBuffer *this)
 {
-	printk(KERN_DEBUG "midibuf size=%d split=%d pos_read=%d pos_write=%d "
+	pr_debug("midibuf size=%d split=%d pos_read=%d pos_write=%d "
 	       "full=%d command_prev=%02x\n", this->size, this->split,
 	       this->pos_read, this->pos_write, this->full, this->command_prev);
 }
diff --git a/drivers/staging/line6/pcm.c b/drivers/staging/line6/pcm.c
index 90d2d4475cb4..5e319e3ce685 100644
--- a/drivers/staging/line6/pcm.c
+++ b/drivers/staging/line6/pcm.c
@@ -99,7 +99,7 @@ int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int channels)
 	unsigned long flags_new = flags_old | channels;
 	unsigned long flags_final = flags_old;
 	int err = 0;
-	
+
 	line6pcm->prev_fbuf = NULL;
 
 	if (test_flags(flags_old, flags_new, LINE6_BITS_CAPTURE_BUFFER)) {
diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c
index b754f69a29c4..31b624b63425 100644
--- a/drivers/staging/line6/toneport.c
+++ b/drivers/staging/line6/toneport.c
@@ -168,7 +168,7 @@ static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
 			      cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ);
 
 	if (ret < 0) {
-		err("send failed (error %d)\n", ret);
+		dev_err(&usbdev->dev, "send failed (error %d)\n", ret);
 		return ret;
 	}
 
diff --git a/drivers/staging/media/as102/as102_drv.c b/drivers/staging/media/as102/as102_drv.c
index ea4f992de235..ac92eaf6c74b 100644
--- a/drivers/staging/media/as102/as102_drv.c
+++ b/drivers/staging/media/as102/as102_drv.c
@@ -279,40 +279,8 @@ void as102_dvb_unregister(struct as102_dev_t *as102_dev)
 	pr_info("Unregistered device %s", as102_dev->name);
 }
 
-static int __init as102_driver_init(void)
-{
-	int ret;
-
-	/* register this driver with the low level subsystem */
-	ret = usb_register(&as102_usb_driver);
-	if (ret)
-		err("usb_register failed (ret = %d)", ret);
-
-	return ret;
-}
-
-/*
- * Mandatory function : Adds a special section to the module indicating
- * where initialisation function is defined
- */
-module_init(as102_driver_init);
-
-/**
- * as102_driver_exit - as102 driver exit point
- *
- * This function is called when device has to be removed.
- */
-static void __exit as102_driver_exit(void)
-{
-	/* deregister this driver with the low level bus subsystem */
-	usb_deregister(&as102_usb_driver);
-}
+module_usb_driver(as102_usb_driver);
 
-/*
- * required function for unload: Adds a special section to the module
- * indicating where unload function is defined
- */
-module_exit(as102_driver_exit);
 /* modinfo details */
 MODULE_DESCRIPTION(DRIVER_FULL_NAME);
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/media/as102/as102_fe.c b/drivers/staging/media/as102/as102_fe.c
index 5917657b9d0f..9ce8c9daa2e7 100644
--- a/drivers/staging/media/as102/as102_fe.c
+++ b/drivers/staging/media/as102/as102_fe.c
@@ -17,8 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/version.h>
-
 #include "as102_drv.h"
 #include "as10x_types.h"
 #include "as10x_cmd.h"
diff --git a/drivers/staging/media/as102/as102_fw.c b/drivers/staging/media/as102/as102_fw.c
index 1075fb1df0d9..b9670ee41b4e 100644
--- a/drivers/staging/media/as102/as102_fw.c
+++ b/drivers/staging/media/as102/as102_fw.c
@@ -230,11 +230,8 @@ int as102_fw_upload(struct as10x_bus_adapter_t *bus_adap)
 	pr_info("%s: firmware: %s loaded with success\n",
 		DRIVER_NAME, fw2);
 error:
-	/* free data buffer */
 	kfree(cmd_buf);
-	/* release firmware if needed */
-	if (firmware != NULL)
-		release_firmware(firmware);
+	release_firmware(firmware);
 
 	LEAVE();
 	return errno;
diff --git a/drivers/staging/media/as102/as102_usb_drv.c b/drivers/staging/media/as102/as102_usb_drv.c
index 0f6bfe7eccba..aaf1bc2ad1b2 100644
--- a/drivers/staging/media/as102/as102_usb_drv.c
+++ b/drivers/staging/media/as102/as102_usb_drv.c
@@ -367,7 +367,7 @@ static int as102_usb_probe(struct usb_interface *intf,
 	ENTER();
 
 	/* This should never actually happen */
-	if ((sizeof(as102_usb_id_table) / sizeof(struct usb_device_id)) !=
+	if (ARRAY_SIZE(as102_usb_id_table) !=
 	    (sizeof(as102_device_names) / sizeof(const char *))) {
 		pr_err("Device names table invalid size");
 		return -EINVAL;
@@ -375,13 +375,12 @@ static int as102_usb_probe(struct usb_interface *intf,
 
 	as102_dev = kzalloc(sizeof(struct as102_dev_t), GFP_KERNEL);
 	if (as102_dev == NULL) {
-		err("%s: kzalloc failed", __func__);
+		dev_err(&intf->dev, "%s: kzalloc failed\n", __func__);
 		return -ENOMEM;
 	}
 
 	/* Assign the user-friendly device name */
-	for (i = 0; i < (sizeof(as102_usb_id_table) /
-			 sizeof(struct usb_device_id)); i++) {
+	for (i = 0; i < ARRAY_SIZE(as102_usb_id_table); i++) {
 		if (id == &as102_usb_id_table[i]) {
 			as102_dev->name = as102_device_names[i];
 			as102_dev->elna_cfg = as102_elna_cfg[i];
@@ -411,8 +410,9 @@ static int as102_usb_probe(struct usb_interface *intf,
 	ret = usb_register_dev(intf, &as102_usb_class_driver);
 	if (ret < 0) {
 		/* something prevented us from registering this driver */
-		err("%s: usb_register_dev() failed (errno = %d)",
-		    __func__, ret);
+		dev_err(&intf->dev,
+			"%s: usb_register_dev() failed (errno = %d)\n",
+			__func__, ret);
 		goto failed;
 	}
 
diff --git a/drivers/staging/media/as102/as102_usb_drv.h b/drivers/staging/media/as102/as102_usb_drv.h
index fc2884ab02a2..1ad1ec52b11e 100644
--- a/drivers/staging/media/as102/as102_usb_drv.h
+++ b/drivers/staging/media/as102/as102_usb_drv.h
@@ -17,8 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/version.h>
-
 #ifndef _AS102_USB_DRV_H_
 #define _AS102_USB_DRV_H_
 
diff --git a/drivers/staging/media/easycap/easycap_ioctl.c b/drivers/staging/media/easycap/easycap_ioctl.c
index 9413b37490c2..3cee3cd986d2 100644
--- a/drivers/staging/media/easycap/easycap_ioctl.c
+++ b/drivers/staging/media/easycap/easycap_ioctl.c
@@ -26,6 +26,7 @@
 /*****************************************************************************/
 
 #include "easycap.h"
+#include <linux/version.h>
 
 /*--------------------------------------------------------------------------*/
 /*
diff --git a/drivers/staging/media/easycap/easycap_main.c b/drivers/staging/media/easycap/easycap_main.c
index d0fe34afc2e5..6f83d362ab0d 100644
--- a/drivers/staging/media/easycap/easycap_main.c
+++ b/drivers/staging/media/easycap/easycap_main.c
@@ -3578,7 +3578,8 @@ static int easycap_usb_probe(struct usb_interface *intf,
 
 		if (0 != (video_register_device(&(peasycap->video_device),
 							VFL_TYPE_GRABBER, -1))) {
-			err("Not able to register with videodev");
+			dev_err(&intf->dev,
+				"Not able to register with videodev\n");
 			videodev_release(&(peasycap->video_device));
 			return -ENODEV;
 		}
@@ -3822,7 +3823,8 @@ static int easycap_usb_probe(struct usb_interface *intf,
 
 		rc = easycap_alsa_probe(peasycap);
 		if (rc) {
-			err("easycap_alsa_probe() rc = %i\n", rc);
+			dev_err(&intf->dev, "easycap_alsa_probe() rc = %i\n",
+				rc);
 			return -ENODEV;
 		}
 
diff --git a/drivers/staging/media/go7007/README b/drivers/staging/media/go7007/README
index 48f447637817..aeba1324a9c5 100644
--- a/drivers/staging/media/go7007/README
+++ b/drivers/staging/media/go7007/README
@@ -6,6 +6,6 @@ Todo:
 	- testing?
 	- handle churn in v4l layer.
 
-Please send patchs to Greg Kroah-Hartman <greg@kroah.com> and Cc: Ross
+Please send patches to Greg Kroah-Hartman <greg@linuxfoundation.org> and Cc: Ross
 Cohen <rcohen@snurgle.org> as well.
 
diff --git a/drivers/staging/media/go7007/go7007.txt b/drivers/staging/media/go7007/go7007.txt
index 9db1f3952fd2..fcb3e235abbf 100644
--- a/drivers/staging/media/go7007/go7007.txt
+++ b/drivers/staging/media/go7007/go7007.txt
@@ -87,7 +87,6 @@ kernel as built-in or modules:
 	CONFIG_SOUND             - Sound card support
 	CONFIG_SND               - Advanced Linux Sound Architecture
 	CONFIG_USB               - Support for Host-side USB
-	CONFIG_USB_DEVICEFS      - USB device filesystem
 	CONFIG_USB_EHCI_HCD      - EHCI HCD (USB 2.0) support
 
 Additionally, to use the example application, the following options need to
diff --git a/drivers/staging/media/go7007/s2250-loader.c b/drivers/staging/media/go7007/s2250-loader.c
index 4e132519e253..7c5af4f289b6 100644
--- a/drivers/staging/media/go7007/s2250-loader.c
+++ b/drivers/staging/media/go7007/s2250-loader.c
@@ -160,31 +160,7 @@ static struct usb_driver s2250loader_driver = {
 	.id_table	= s2250loader_ids,
 };
 
-static int __init s2250loader_init(void)
-{
-	int r;
-	unsigned i = 0;
-
-	for (i = 0; i < MAX_DEVICES; i++)
-		s2250_dev_table[i] = NULL;
-
-	r = usb_register(&s2250loader_driver);
-	if (r) {
-		printk(KERN_ERR "usb_register failed. Error number %d\n", r);
-		return -1;
-	}
-
-	printk(KERN_INFO "s2250loader_init: driver registered\n");
-	return 0;
-}
-module_init(s2250loader_init);
-
-static void __exit s2250loader_cleanup(void)
-{
-	printk(KERN_INFO "s2250loader_cleanup\n");
-	usb_deregister(&s2250loader_driver);
-}
-module_exit(s2250loader_cleanup);
+module_usb_driver(s2250loader_driver);
 
 MODULE_AUTHOR("");
 MODULE_DESCRIPTION("firmware loader for Sensoray 2250/2251");
diff --git a/drivers/staging/media/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c
index 5f7f8cd3a661..d7cf5ef076a5 100644
--- a/drivers/staging/media/lirc/lirc_imon.c
+++ b/drivers/staging/media/lirc/lirc_imon.c
@@ -209,8 +209,9 @@ static void deregister_from_lirc(struct imon_context *context)
 
 	retval = lirc_unregister_driver(minor);
 	if (retval)
-		err("%s: unable to deregister from lirc(%d)",
-			__func__, retval);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: unable to deregister from lirc(%d)",
+		       __func__, retval);
 	else
 		printk(KERN_INFO MOD_NAME ": Deregistered iMON driver "
 		       "(minor:%d)\n", minor);
@@ -234,16 +235,18 @@ static int display_open(struct inode *inode, struct file *file)
 	subminor = iminor(inode);
 	interface = usb_find_interface(&imon_driver, subminor);
 	if (!interface) {
-		err("%s: could not find interface for minor %d",
-		    __func__, subminor);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: could not find interface for minor %d\n",
+		       __func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
 	context = usb_get_intfdata(interface);
 
 	if (!context) {
-		err("%s: no context found for minor %d",
-					__func__, subminor);
+		dev_err(&interface->dev,
+			"%s: no context found for minor %d\n",
+			__func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
@@ -251,10 +254,12 @@ static int display_open(struct inode *inode, struct file *file)
 	mutex_lock(&context->ctx_lock);
 
 	if (!context->display) {
-		err("%s: display not supported by device", __func__);
+		dev_err(&interface->dev,
+			"%s: display not supported by device\n", __func__);
 		retval = -ENODEV;
 	} else if (context->display_isopen) {
-		err("%s: display port is already open", __func__);
+		dev_err(&interface->dev,
+			"%s: display port is already open\n", __func__);
 		retval = -EBUSY;
 	} else {
 		context->display_isopen = 1;
@@ -281,17 +286,20 @@ static int display_close(struct inode *inode, struct file *file)
 	context = file->private_data;
 
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       "%s: no context for device\n", __func__);
 		return -ENODEV;
 	}
 
 	mutex_lock(&context->ctx_lock);
 
 	if (!context->display) {
-		err("%s: display not supported by device", __func__);
+		dev_err(&context->usbdev->dev,
+			"%s: display not supported by device\n", __func__);
 		retval = -ENODEV;
 	} else if (!context->display_isopen) {
-		err("%s: display is not open", __func__);
+		dev_err(&context->usbdev->dev,
+			"%s: display is not open\n", __func__);
 		retval = -EIO;
 	} else {
 		context->display_isopen = 0;
@@ -340,19 +348,23 @@ static int send_packet(struct imon_context *context)
 	retval = usb_submit_urb(context->tx_urb, GFP_KERNEL);
 	if (retval) {
 		atomic_set(&(context->tx.busy), 0);
-		err("%s: error submitting urb(%d)", __func__, retval);
+		dev_err(&context->usbdev->dev,
+			"%s: error submitting urb(%d)\n", __func__, retval);
 	} else {
 		/* Wait for transmission to complete (or abort) */
 		mutex_unlock(&context->ctx_lock);
 		retval = wait_for_completion_interruptible(
 				&context->tx.finished);
 		if (retval)
-			err("%s: task interrupted", __func__);
+			dev_err(&context->usbdev->dev,
+				"%s: task interrupted\n", __func__);
 		mutex_lock(&context->ctx_lock);
 
 		retval = context->tx.status;
 		if (retval)
-			err("%s: packet tx failed (%d)", __func__, retval);
+			dev_err(&context->usbdev->dev,
+				"%s: packet tx failed (%d)\n",
+				__func__, retval);
 	}
 
 	return retval;
@@ -383,20 +395,23 @@ static ssize_t vfd_write(struct file *file, const char __user *buf,
 
 	context = file->private_data;
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       "%s: no context for device\n", __func__);
 		return -ENODEV;
 	}
 
 	mutex_lock(&context->ctx_lock);
 
 	if (!context->dev_present) {
-		err("%s: no iMON device present", __func__);
+		dev_err(&context->usbdev->dev,
+			"%s: no iMON device present\n", __func__);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	if (n_bytes <= 0 || n_bytes > IMON_DATA_BUF_SZ - 3) {
-		err("%s: invalid payload size", __func__);
+		dev_err(&context->usbdev->dev,
+			"%s: invalid payload size\n", __func__);
 		retval = -EINVAL;
 		goto exit;
 	}
@@ -425,8 +440,9 @@ static ssize_t vfd_write(struct file *file, const char __user *buf,
 
 		retval = send_packet(context);
 		if (retval) {
-			err("%s: send packet failed for packet #%d",
-					__func__, seq/2);
+			dev_err(&context->usbdev->dev,
+				"%s: send packet failed for packet #%d\n",
+				__func__, seq/2);
 			goto exit;
 		} else {
 			seq += 2;
@@ -441,7 +457,8 @@ static ssize_t vfd_write(struct file *file, const char __user *buf,
 		context->usb_tx_buf[7] = (unsigned char) seq;
 		retval = send_packet(context);
 		if (retval)
-			err("%s: send packet failed for packet #%d",
+			dev_err(&context->usbdev->dev,
+				"%s: send packet failed for packet #%d\n",
 					__func__, seq/2);
 	}
 
@@ -508,7 +525,8 @@ static void ir_close(void *data)
 
 	context = (struct imon_context *)data;
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       "%s: no context for device\n", __func__);
 		return;
 	}
 
@@ -732,7 +750,7 @@ static int imon_probe(struct usb_interface *interface,
 
 	context = kzalloc(sizeof(struct imon_context), GFP_KERNEL);
 	if (!context) {
-		err("%s: kzalloc failed for context", __func__);
+		dev_err(dev, "%s: kzalloc failed for context\n", __func__);
 		alloc_status = 1;
 		goto alloc_status_switch;
 	}
@@ -797,7 +815,7 @@ static int imon_probe(struct usb_interface *interface,
 
 	/* Input endpoint is mandatory */
 	if (!ir_ep_found) {
-		err("%s: no valid input (IR) endpoint found.", __func__);
+		dev_err(dev, "%s: no valid input (IR) endpoint found.\n", __func__);
 		retval = -ENODEV;
 		alloc_status = 2;
 		goto alloc_status_switch;
@@ -814,30 +832,30 @@ static int imon_probe(struct usb_interface *interface,
 
 	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
 	if (!driver) {
-		err("%s: kzalloc failed for lirc_driver", __func__);
+		dev_err(dev, "%s: kzalloc failed for lirc_driver\n", __func__);
 		alloc_status = 2;
 		goto alloc_status_switch;
 	}
 	rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
 	if (!rbuf) {
-		err("%s: kmalloc failed for lirc_buffer", __func__);
+		dev_err(dev, "%s: kmalloc failed for lirc_buffer\n", __func__);
 		alloc_status = 3;
 		goto alloc_status_switch;
 	}
 	if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) {
-		err("%s: lirc_buffer_init failed", __func__);
+		dev_err(dev, "%s: lirc_buffer_init failed\n", __func__);
 		alloc_status = 4;
 		goto alloc_status_switch;
 	}
 	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!rx_urb) {
-		err("%s: usb_alloc_urb failed for IR urb", __func__);
+		dev_err(dev, "%s: usb_alloc_urb failed for IR urb\n", __func__);
 		alloc_status = 5;
 		goto alloc_status_switch;
 	}
 	tx_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!tx_urb) {
-		err("%s: usb_alloc_urb failed for display urb",
+		dev_err(dev, "%s: usb_alloc_urb failed for display urb\n",
 		    __func__);
 		alloc_status = 6;
 		goto alloc_status_switch;
@@ -865,7 +883,7 @@ static int imon_probe(struct usb_interface *interface,
 
 	lirc_minor = lirc_register_driver(driver);
 	if (lirc_minor < 0) {
-		err("%s: lirc_register_driver failed", __func__);
+		dev_err(dev, "%s: lirc_register_driver failed\n", __func__);
 		alloc_status = 7;
 		goto unlock;
 	} else
@@ -900,8 +918,8 @@ static int imon_probe(struct usb_interface *interface,
 	retval = usb_submit_urb(context->rx_urb, GFP_KERNEL);
 
 	if (retval) {
-		err("%s: usb_submit_urb failed for intf0 (%d)",
-		    __func__, retval);
+		dev_err(dev, "%s: usb_submit_urb failed for intf0 (%d)\n",
+			__func__, retval);
 		mutex_unlock(&context->ctx_lock);
 		goto exit;
 	}
diff --git a/drivers/staging/media/lirc/lirc_sasem.c b/drivers/staging/media/lirc/lirc_sasem.c
index 74421043b954..352a20229ca2 100644
--- a/drivers/staging/media/lirc/lirc_sasem.c
+++ b/drivers/staging/media/lirc/lirc_sasem.c
@@ -185,7 +185,7 @@ static void deregister_from_lirc(struct sasem_context *context)
 
 	retval = lirc_unregister_driver(minor);
 	if (retval)
-		err("%s: unable to deregister from lirc (%d)",
+		printk(KERN_ERR "%s: unable to deregister from lirc (%d)\n",
 			__func__, retval);
 	else
 		printk(KERN_INFO "Deregistered Sasem driver (minor:%d)\n",
@@ -210,16 +210,18 @@ static int vfd_open(struct inode *inode, struct file *file)
 	subminor = iminor(inode);
 	interface = usb_find_interface(&sasem_driver, subminor);
 	if (!interface) {
-		err("%s: could not find interface for minor %d",
-		    __func__, subminor);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: could not find interface for minor %d\n",
+		       __func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
 	context = usb_get_intfdata(interface);
 
 	if (!context) {
-		err("%s: no context found for minor %d",
-					__func__, subminor);
+		dev_err(&interface->dev,
+			"%s: no context found for minor %d\n",
+			__func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
@@ -227,12 +229,13 @@ static int vfd_open(struct inode *inode, struct file *file)
 	mutex_lock(&context->ctx_lock);
 
 	if (context->vfd_isopen) {
-		err("%s: VFD port is already open", __func__);
+		dev_err(&interface->dev,
+			"%s: VFD port is already open", __func__);
 		retval = -EBUSY;
 	} else {
 		context->vfd_isopen = 1;
 		file->private_data = context;
-		printk(KERN_INFO "VFD port opened\n");
+		dev_info(&interface->dev, "VFD port opened\n");
 	}
 
 	mutex_unlock(&context->ctx_lock);
@@ -253,7 +256,8 @@ static long vfd_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 	context = (struct sasem_context *) file->private_data;
 
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: no context for device\n", __func__);
 		return -ENODEV;
 	}
 
@@ -287,14 +291,15 @@ static int vfd_close(struct inode *inode, struct file *file)
 	context = (struct sasem_context *) file->private_data;
 
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: no context for device\n", __func__);
 		return -ENODEV;
 	}
 
 	mutex_lock(&context->ctx_lock);
 
 	if (!context->vfd_isopen) {
-		err("%s: VFD is not open", __func__);
+		dev_err(&context->dev->dev, "%s: VFD is not open\n", __func__);
 		retval = -EIO;
 	} else {
 		context->vfd_isopen = 0;
@@ -339,7 +344,8 @@ static int send_packet(struct sasem_context *context)
 	retval =  usb_submit_urb(context->tx_urb, GFP_KERNEL);
 	if (retval) {
 		atomic_set(&(context->tx.busy), 0);
-		err("%s: error submitting urb (%d)", __func__, retval);
+		dev_err(&context->dev->dev, "%s: error submitting urb (%d)\n",
+			__func__, retval);
 	} else {
 		/* Wait for transmission to complete (or abort) */
 		mutex_unlock(&context->ctx_lock);
@@ -348,7 +354,9 @@ static int send_packet(struct sasem_context *context)
 
 		retval = context->tx.status;
 		if (retval)
-			err("%s: packet tx failed (%d)", __func__, retval);
+			dev_err(&context->dev->dev,
+				"%s: packet tx failed (%d)\n",
+				__func__, retval);
 	}
 
 	return retval;
@@ -369,20 +377,23 @@ static ssize_t vfd_write(struct file *file, const char *buf,
 
 	context = (struct sasem_context *) file->private_data;
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: no context for device\n", __func__);
 		return -ENODEV;
 	}
 
 	mutex_lock(&context->ctx_lock);
 
 	if (!context->dev_present) {
-		err("%s: no Sasem device present", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: no Sasem device present\n", __func__);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	if (n_bytes <= 0 || n_bytes > SASEM_DATA_BUF_SZ) {
-		err("%s: invalid payload size", __func__);
+		dev_err(&context->dev->dev, "%s: invalid payload size\n",
+			__func__);
 		retval = -EINVAL;
 		goto exit;
 	}
@@ -440,9 +451,9 @@ static ssize_t vfd_write(struct file *file, const char *buf,
 		}
 		retval = send_packet(context);
 		if (retval) {
-
-			err("%s: send packet failed for packet #%d",
-					__func__, i);
+			dev_err(&context->dev->dev,
+				"%s: send packet failed for packet #%d\n",
+				__func__, i);
 			goto exit;
 		}
 	}
@@ -492,7 +503,8 @@ static int ir_open(void *data)
 	mutex_lock(&context->ctx_lock);
 
 	if (context->ir_isopen) {
-		err("%s: IR port is already open", __func__);
+		dev_err(&context->dev->dev, "%s: IR port is already open\n",
+			__func__);
 		retval = -EBUSY;
 		goto exit;
 	}
@@ -506,8 +518,9 @@ static int ir_open(void *data)
 	retval = usb_submit_urb(context->rx_urb, GFP_KERNEL);
 
 	if (retval)
-		err("%s: usb_submit_urb failed for ir_open (%d)",
-		    __func__, retval);
+		dev_err(&context->dev->dev,
+			"%s: usb_submit_urb failed for ir_open (%d)\n",
+			__func__, retval);
 	else {
 		context->ir_isopen = 1;
 		printk(KERN_INFO "IR port opened\n");
@@ -529,7 +542,8 @@ static void ir_close(void *data)
 
 	context = (struct sasem_context *)data;
 	if (!context) {
-		err("%s: no context for device", __func__);
+		printk(KERN_ERR KBUILD_MODNAME
+		       ": %s: no context for device\n", __func__);
 		return;
 	}
 
@@ -687,7 +701,7 @@ static int sasem_probe(struct usb_interface *interface,
 	struct sasem_context *context = NULL;
 	int i;
 
-	printk(KERN_INFO "%s: found Sasem device\n", __func__);
+	dev_info(&interface->dev, "%s: found Sasem device\n", __func__);
 
 
 	dev = usb_get_dev(interface_to_usbdev(interface));
@@ -719,8 +733,8 @@ static int sasem_probe(struct usb_interface *interface,
 			rx_endpoint = ep;
 			ir_ep_found = 1;
 			if (debug)
-				printk(KERN_INFO "%s: found IR endpoint\n",
-				       __func__);
+				dev_info(&interface->dev,
+					"%s: found IR endpoint\n", __func__);
 
 		} else if (!vfd_ep_found &&
 			ep_dir == USB_DIR_OUT &&
@@ -729,22 +743,23 @@ static int sasem_probe(struct usb_interface *interface,
 			tx_endpoint = ep;
 			vfd_ep_found = 1;
 			if (debug)
-				printk(KERN_INFO "%s: found VFD endpoint\n",
-				       __func__);
+				dev_info(&interface->dev,
+					"%s: found VFD endpoint\n", __func__);
 		}
 	}
 
 	/* Input endpoint is mandatory */
 	if (!ir_ep_found) {
-
-		err("%s: no valid input (IR) endpoint found.", __func__);
+		dev_err(&interface->dev,
+			"%s: no valid input (IR) endpoint found.\n", __func__);
 		retval = -ENODEV;
 		goto exit;
 	}
 
 	if (!vfd_ep_found)
-		printk(KERN_INFO "%s: no valid output (VFD) endpoint found.\n",
-		       __func__);
+		dev_info(&interface->dev,
+			"%s: no valid output (VFD) endpoint found.\n",
+			__func__);
 
 
 	/* Allocate memory */
@@ -752,38 +767,44 @@ static int sasem_probe(struct usb_interface *interface,
 
 	context = kzalloc(sizeof(struct sasem_context), GFP_KERNEL);
 	if (!context) {
-		err("%s: kzalloc failed for context", __func__);
+		dev_err(&interface->dev,
+			"%s: kzalloc failed for context\n", __func__);
 		alloc_status = 1;
 		goto alloc_status_switch;
 	}
 	driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
 	if (!driver) {
-		err("%s: kzalloc failed for lirc_driver", __func__);
+		dev_err(&interface->dev,
+			"%s: kzalloc failed for lirc_driver\n", __func__);
 		alloc_status = 2;
 		goto alloc_status_switch;
 	}
 	rbuf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
 	if (!rbuf) {
-		err("%s: kmalloc failed for lirc_buffer", __func__);
+		dev_err(&interface->dev,
+			"%s: kmalloc failed for lirc_buffer\n", __func__);
 		alloc_status = 3;
 		goto alloc_status_switch;
 	}
 	if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) {
-		err("%s: lirc_buffer_init failed", __func__);
+		dev_err(&interface->dev,
+			"%s: lirc_buffer_init failed\n", __func__);
 		alloc_status = 4;
 		goto alloc_status_switch;
 	}
 	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!rx_urb) {
-		err("%s: usb_alloc_urb failed for IR urb", __func__);
+		dev_err(&interface->dev,
+			"%s: usb_alloc_urb failed for IR urb\n", __func__);
 		alloc_status = 5;
 		goto alloc_status_switch;
 	}
 	if (vfd_ep_found) {
 		tx_urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (!tx_urb) {
-			err("%s: usb_alloc_urb failed for VFD urb",
-			    __func__);
+			dev_err(&interface->dev,
+				"%s: usb_alloc_urb failed for VFD urb",
+				__func__);
 			alloc_status = 6;
 			goto alloc_status_switch;
 		}
@@ -807,7 +828,8 @@ static int sasem_probe(struct usb_interface *interface,
 
 	lirc_minor = lirc_register_driver(driver);
 	if (lirc_minor < 0) {
-		err("%s: lirc_register_driver failed", __func__);
+		dev_err(&interface->dev,
+			"%s: lirc_register_driver failed\n", __func__);
 		alloc_status = 7;
 		retval = lirc_minor;
 		goto unlock;
diff --git a/drivers/staging/media/lirc/lirc_ttusbir.c b/drivers/staging/media/lirc/lirc_ttusbir.c
index 7950887ff113..3bb865c02173 100644
--- a/drivers/staging/media/lirc/lirc_ttusbir.c
+++ b/drivers/staging/media/lirc/lirc_ttusbir.c
@@ -113,8 +113,9 @@ static int set_use_inc(void *data)
 	for (i = 0; i < num_urbs; i++) {
 		retval = usb_submit_urb(ttusbir->urb[i], GFP_KERNEL);
 		if (retval) {
-			err("%s: usb_submit_urb failed on urb %d",
-			    __func__, i);
+			dev_err(&ttusbir->interf->dev,
+				"%s: usb_submit_urb failed on urb %d\n",
+				__func__, i);
 			return retval;
 		}
 	}
@@ -278,7 +279,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (ttusbir->alt_setting != -1)
 		DPRINTK("alt setting: %d\n", ttusbir->alt_setting);
 	else {
-		err("Could not find alternate setting\n");
+		dev_err(&intf->dev, "Could not find alternate setting\n");
 		kfree(ttusbir);
 		return -EINVAL;
 	}
@@ -291,7 +292,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	/* Register as a LIRC driver */
 	if (lirc_buffer_init(&ttusbir->rbuf, sizeof(int), 256) < 0) {
-		err("Could not get memory for LIRC data buffer\n");
+		dev_err(&intf->dev, "Could not get memory for LIRC data buffer\n");
 		usb_set_intfdata(intf, NULL);
 		kfree(ttusbir);
 		return -ENOMEM;
@@ -310,7 +311,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
 	ttusbir->driver.features = LIRC_CAN_REC_MODE2;
 	ttusbir->minor = lirc_register_driver(&ttusbir->driver);
 	if (ttusbir->minor < 0) {
-		err("Error registering as LIRC driver\n");
+		dev_err(&intf->dev, "Error registering as LIRC driver\n");
 		usb_set_intfdata(intf, NULL);
 		lirc_buffer_free(&ttusbir->rbuf);
 		kfree(ttusbir);
@@ -321,7 +322,7 @@ static int probe(struct usb_interface *intf, const struct usb_device_id *id)
 	for (i = 0; i < num_urbs; i++) {
 		ttusbir->urb[i] = usb_alloc_urb(8, GFP_KERNEL);
 		if (!ttusbir->urb[i]) {
-			err("Could not allocate memory for the URB\n");
+			dev_err(&intf->dev, "Could not allocate memory for the URB\n");
 			for (j = i - 1; j >= 0; j--)
 				kfree(ttusbir->urb[j]);
 			lirc_buffer_free(&ttusbir->rbuf);
diff --git a/drivers/staging/mei/TODO b/drivers/staging/mei/TODO
deleted file mode 100644
index fc266018355e..000000000000
--- a/drivers/staging/mei/TODO
+++ /dev/null
@@ -1,10 +0,0 @@
-TODO:
-	- Cleanup and split the timer function
-Upon Unstaging:
-	- move mei.h to include/linux/mei.h
-	- Documentation/ioctl/ioctl-number.txt
-	- move mei.txt under Documentation/mei/
-	- move mei-amt-version.c under Documentation/mei
-	- add hostprogs-y for mei-amt-version.c
-	- drop mei_version.h
-	- Updated MAINTAINERS
diff --git a/drivers/staging/mei/mei-amt-version.c b/drivers/staging/mei/mei-amt-version.c
deleted file mode 100644
index ac2a507be253..000000000000
--- a/drivers/staging/mei/mei-amt-version.c
+++ /dev/null
@@ -1,481 +0,0 @@
-/******************************************************************************
- * Intel Management Engine Interface (Intel MEI) Linux driver
- * Intel MEI Interface Header
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2012 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *	Intel Corporation.
- *	linux-mei@linux.intel.com
- *	http://www.intel.com
- *
- * BSD LICENSE
- *
- * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <unistd.h>
-#include <errno.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <bits/wordsize.h>
-#include "mei.h"
-
-/*****************************************************************************
- * Intel Management Engine Interface
- *****************************************************************************/
-
-#define mei_msg(_me, fmt, ARGS...) do {         \
-	if (_me->verbose)                       \
-		fprintf(stderr, fmt, ##ARGS);	\
-} while (0)
-
-#define mei_err(_me, fmt, ARGS...) do {         \
-	fprintf(stderr, "Error: " fmt, ##ARGS); \
-} while (0)
-
-struct mei {
-	uuid_le guid;
-	bool initialized;
-	bool verbose;
-	unsigned int buf_size;
-	unsigned char prot_ver;
-	int fd;
-};
-
-static void mei_deinit(struct mei *cl)
-{
-	if (cl->fd != -1)
-		close(cl->fd);
-	cl->fd = -1;
-	cl->buf_size = 0;
-	cl->prot_ver = 0;
-	cl->initialized = false;
-}
-
-static bool mei_init(struct mei *me, const uuid_le *guid,
-		unsigned char req_protocol_version, bool verbose)
-{
-	int result;
-	struct mei_client *cl;
-	struct mei_connect_client_data data;
-
-	mei_deinit(me);
-
-	me->verbose = verbose;
-
-	me->fd = open("/dev/mei", O_RDWR);
-	if (me->fd == -1) {
-		mei_err(me, "Cannot establish a handle to the Intel MEI driver\n");
-		goto err;
-	}
-	memcpy(&me->guid, guid, sizeof(*guid));
-	memset(&data, 0, sizeof(data));
-	me->initialized = true;
-
-	memcpy(&data.in_client_uuid, &me->guid, sizeof(me->guid));
-	result = ioctl(me->fd, IOCTL_MEI_CONNECT_CLIENT, &data);
-	if (result) {
-		mei_err(me, "IOCTL_MEI_CONNECT_CLIENT receive message. err=%d\n", result);
-		goto err;
-	}
-	cl = &data.out_client_properties;
-	mei_msg(me, "max_message_length %d\n", cl->max_msg_length);
-	mei_msg(me, "protocol_version %d\n", cl->protocol_version);
-
-	if ((req_protocol_version > 0) &&
-	     (cl->protocol_version != req_protocol_version)) {
-		mei_err(me, "Intel MEI protocol version not supported\n");
-		goto err;
-	}
-
-	me->buf_size = cl->max_msg_length;
-	me->prot_ver = cl->protocol_version;
-
-	return true;
-err:
-	mei_deinit(me);
-	return false;
-}
-
-static ssize_t mei_recv_msg(struct mei *me, unsigned char *buffer,
-			ssize_t len, unsigned long timeout)
-{
-	ssize_t rc;
-
-	mei_msg(me, "call read length = %zd\n", len);
-
-	rc = read(me->fd, buffer, len);
-	if (rc < 0) {
-		mei_err(me, "read failed with status %zd %s\n",
-				rc, strerror(errno));
-		mei_deinit(me);
-	} else {
-		mei_msg(me, "read succeeded with result %zd\n", rc);
-	}
-	return rc;
-}
-
-static ssize_t mei_send_msg(struct mei *me, const unsigned char *buffer,
-			ssize_t len, unsigned long timeout)
-{
-	struct timeval tv;
-	ssize_t written;
-	ssize_t rc;
-	fd_set set;
-
-	tv.tv_sec = timeout / 1000;
-	tv.tv_usec = (timeout % 1000) * 1000000;
-
-	mei_msg(me, "call write length = %zd\n", len);
-
-	written = write(me->fd, buffer, len);
-	if (written < 0) {
-		rc = -errno;
-		mei_err(me, "write failed with status %zd %s\n",
-			written, strerror(errno));
-		goto out;
-	}
-
-	FD_ZERO(&set);
-	FD_SET(me->fd, &set);
-	rc = select(me->fd + 1 , &set, NULL, NULL, &tv);
-	if (rc > 0 && FD_ISSET(me->fd, &set)) {
-		mei_msg(me, "write success\n");
-	} else if (rc == 0) {
-		mei_err(me, "write failed on timeout with status\n");
-		goto out;
-	} else { /* rc < 0 */
-		mei_err(me, "write failed on select with status %zd\n", rc);
-		goto out;
-	}
-
-	rc = written;
-out:
-	if (rc < 0)
-		mei_deinit(me);
-
-	return rc;
-}
-
-/***************************************************************************
- * Intel Advanced Management Technolgy ME Client
- ***************************************************************************/
-
-#define AMT_MAJOR_VERSION 1
-#define AMT_MINOR_VERSION 1
-
-#define AMT_STATUS_SUCCESS                0x0
-#define AMT_STATUS_INTERNAL_ERROR         0x1
-#define AMT_STATUS_NOT_READY              0x2
-#define AMT_STATUS_INVALID_AMT_MODE       0x3
-#define AMT_STATUS_INVALID_MESSAGE_LENGTH 0x4
-
-#define AMT_STATUS_HOST_IF_EMPTY_RESPONSE  0x4000
-#define AMT_STATUS_SDK_RESOURCES      0x1004
-
-
-#define AMT_BIOS_VERSION_LEN   65
-#define AMT_VERSIONS_NUMBER    50
-#define AMT_UNICODE_STRING_LEN 20
-
-struct amt_unicode_string {
-	uint16_t length;
-	char string[AMT_UNICODE_STRING_LEN];
-} __attribute__((packed));
-
-struct amt_version_type {
-	struct amt_unicode_string description;
-	struct amt_unicode_string version;
-} __attribute__((packed));
-
-struct amt_version {
-	uint8_t major;
-	uint8_t minor;
-} __attribute__((packed));
-
-struct amt_code_versions {
-	uint8_t bios[AMT_BIOS_VERSION_LEN];
-	uint32_t count;
-	struct amt_version_type versions[AMT_VERSIONS_NUMBER];
-} __attribute__((packed));
-
-/***************************************************************************
- * Intel Advanced Management Technolgy Host Interface
- ***************************************************************************/
-
-struct amt_host_if_msg_header {
-	struct amt_version version;
-	uint16_t _reserved;
-	uint32_t command;
-	uint32_t length;
-} __attribute__((packed));
-
-struct amt_host_if_resp_header {
-	struct amt_host_if_msg_header header;
-	uint32_t status;
-	unsigned char data[0];
-} __attribute__((packed));
-
-const uuid_le MEI_IAMTHIF = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d,  \
-				0xac, 0xa8, 0x46, 0xe0, 0xff, 0x65, 0x81, 0x4c);
-
-#define AMT_HOST_IF_CODE_VERSIONS_REQUEST  0x0400001A
-#define AMT_HOST_IF_CODE_VERSIONS_RESPONSE 0x0480001A
-
-const struct amt_host_if_msg_header CODE_VERSION_REQ = {
-	.version = {AMT_MAJOR_VERSION, AMT_MINOR_VERSION},
-	._reserved = 0,
-	.command = AMT_HOST_IF_CODE_VERSIONS_REQUEST,
-	.length = 0
-};
-
-
-struct amt_host_if {
-	struct mei mei_cl;
-	unsigned long send_timeout;
-	bool initialized;
-};
-
-
-static bool amt_host_if_init(struct amt_host_if *acmd,
-		      unsigned long send_timeout, bool verbose)
-{
-	acmd->send_timeout = (send_timeout) ? send_timeout : 20000;
-	acmd->initialized = mei_init(&acmd->mei_cl, &MEI_IAMTHIF, 0, verbose);
-	return acmd->initialized;
-}
-
-static void amt_host_if_deinit(struct amt_host_if *acmd)
-{
-	mei_deinit(&acmd->mei_cl);
-	acmd->initialized = false;
-}
-
-static uint32_t amt_verify_code_versions(const struct amt_host_if_resp_header *resp)
-{
-	uint32_t status = AMT_STATUS_SUCCESS;
-	struct amt_code_versions *code_ver;
-	size_t code_ver_len;
-	uint32_t ver_type_cnt;
-	uint32_t len;
-	uint32_t i;
-
-	code_ver = (struct amt_code_versions *)resp->data;
-	/* length - sizeof(status) */
-	code_ver_len = resp->header.length - sizeof(uint32_t);
-	ver_type_cnt = code_ver_len -
-			sizeof(code_ver->bios) -
-			sizeof(code_ver->count);
-	if (code_ver->count != ver_type_cnt / sizeof(struct amt_version_type)) {
-		status = AMT_STATUS_INTERNAL_ERROR;
-		goto out;
-	}
-
-	for (i = 0; i < code_ver->count; i++) {
-		len = code_ver->versions[i].description.length;
-
-		if (len > AMT_UNICODE_STRING_LEN) {
-			status = AMT_STATUS_INTERNAL_ERROR;
-			goto out;
-		}
-
-		len = code_ver->versions[i].version.length;
-		if (code_ver->versions[i].version.string[len] != '\0' ||
-		    len != strlen(code_ver->versions[i].version.string)) {
-			status = AMT_STATUS_INTERNAL_ERROR;
-			goto out;
-		}
-	}
-out:
-	return status;
-}
-
-static uint32_t amt_verify_response_header(uint32_t command,
-				const struct amt_host_if_msg_header *resp_hdr,
-				uint32_t response_size)
-{
-	if (response_size < sizeof(struct amt_host_if_resp_header)) {
-		return AMT_STATUS_INTERNAL_ERROR;
-	} else if (response_size != (resp_hdr->length +
-				sizeof(struct amt_host_if_msg_header))) {
-		return AMT_STATUS_INTERNAL_ERROR;
-	} else if (resp_hdr->command != command) {
-		return AMT_STATUS_INTERNAL_ERROR;
-	} else if (resp_hdr->_reserved != 0) {
-		return AMT_STATUS_INTERNAL_ERROR;
-	} else if (resp_hdr->version.major != AMT_MAJOR_VERSION ||
-		   resp_hdr->version.minor < AMT_MINOR_VERSION) {
-		return AMT_STATUS_INTERNAL_ERROR;
-	}
-	return AMT_STATUS_SUCCESS;
-}
-
-static uint32_t amt_host_if_call(struct amt_host_if *acmd,
-			const unsigned char *command, ssize_t command_sz,
-			uint8_t **read_buf, uint32_t rcmd,
-			unsigned int expected_sz)
-{
-	uint32_t in_buf_sz;
-	uint32_t out_buf_sz;
-	ssize_t written;
-	uint32_t status;
-	struct amt_host_if_resp_header *msg_hdr;
-
-	in_buf_sz = acmd->mei_cl.buf_size;
-	*read_buf = (uint8_t *)malloc(sizeof(uint8_t) * in_buf_sz);
-	if (*read_buf == NULL)
-		return AMT_STATUS_SDK_RESOURCES;
-	memset(*read_buf, 0, in_buf_sz);
-	msg_hdr = (struct amt_host_if_resp_header *)*read_buf;
-
-	written = mei_send_msg(&acmd->mei_cl,
-				command, command_sz, acmd->send_timeout);
-	if (written != command_sz)
-		return AMT_STATUS_INTERNAL_ERROR;
-
-	out_buf_sz = mei_recv_msg(&acmd->mei_cl, *read_buf, in_buf_sz, 2000);
-	if (out_buf_sz <= 0)
-		return AMT_STATUS_HOST_IF_EMPTY_RESPONSE;
-
-	status = msg_hdr->status;
-	if (status != AMT_STATUS_SUCCESS)
-		return status;
-
-	status = amt_verify_response_header(rcmd,
-				&msg_hdr->header, out_buf_sz);
-	if (status != AMT_STATUS_SUCCESS)
-		return status;
-
-	if (expected_sz && expected_sz != out_buf_sz)
-		return AMT_STATUS_INTERNAL_ERROR;
-
-	return AMT_STATUS_SUCCESS;
-}
-
-
-static uint32_t amt_get_code_versions(struct amt_host_if *cmd,
-			       struct amt_code_versions *versions)
-{
-	struct amt_host_if_resp_header *response = NULL;
-	uint32_t status;
-
-	status = amt_host_if_call(cmd,
-			(const unsigned char *)&CODE_VERSION_REQ,
-			sizeof(CODE_VERSION_REQ),
-			(uint8_t **)&response,
-			AMT_HOST_IF_CODE_VERSIONS_RESPONSE, 0);
-
-	if (status != AMT_STATUS_SUCCESS)
-		goto out;
-
-	status = amt_verify_code_versions(response);
-	if (status != AMT_STATUS_SUCCESS)
-		goto out;
-
-	memcpy(versions, response->data, sizeof(struct amt_code_versions));
-out:
-	if (response != NULL)
-		free(response);
-
-	return status;
-}
-
-/************************** end of amt_host_if_command ***********************/
-int main(int argc, char **argv)
-{
-	struct amt_code_versions ver;
-	struct amt_host_if acmd;
-	unsigned int i;
-	uint32_t status;
-	int ret;
-	bool verbose;
-
-	verbose = (argc > 1 && strcmp(argv[1], "-v") == 0);
-
-	if (!amt_host_if_init(&acmd, 5000, verbose)) {
-		ret = 1;
-		goto out;
-	}
-
-	status = amt_get_code_versions(&acmd, &ver);
-
-	amt_host_if_deinit(&acmd);
-
-	switch (status) {
-	case AMT_STATUS_HOST_IF_EMPTY_RESPONSE:
-		printf("Intel AMT: DISABLED\n");
-		ret = 0;
-		break;
-	case AMT_STATUS_SUCCESS:
-		printf("Intel AMT: ENABLED\n");
-		for (i = 0; i < ver.count; i++) {
-			printf("%s:\t%s\n", ver.versions[i].description.string,
-				ver.versions[i].version.string);
-		}
-		ret = 0;
-		break;
-	default:
-		printf("An error has occurred\n");
-		ret = 1;
-		break;
-	}
-
-out:
-	return ret;
-}
diff --git a/drivers/staging/mei/mei.h b/drivers/staging/mei/mei.h
deleted file mode 100644
index bc0d8b69c49e..000000000000
--- a/drivers/staging/mei/mei.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/******************************************************************************
- * Intel Management Engine Interface (Intel MEI) Linux driver
- * Intel MEI Interface Header
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *	Intel Corporation.
- *	linux-mei@linux.intel.com
- *	http://www.intel.com
- *
- * BSD LICENSE
- *
- * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-
-#ifndef _LINUX_MEI_H
-#define _LINUX_MEI_H
-
-#include <linux/uuid.h>
-
-/*
- * This IOCTL is used to associate the current file descriptor with a
- * FW Client (given by UUID). This opens a communication channel
- * between a host client and a FW client. From this point every read and write
- * will communicate with the associated FW client.
- * Only in close() (file_operation release()) the communication between
- * the clients is disconnected
- *
- * The IOCTL argument is a struct with a union that contains
- * the input parameter and the output parameter for this IOCTL.
- *
- * The input parameter is UUID of the FW Client.
- * The output parameter is the properties of the FW client
- * (FW protocol version and max message size).
- *
- */
-#define IOCTL_MEI_CONNECT_CLIENT \
-	_IOWR('H' , 0x01, struct mei_connect_client_data)
-
-/*
- * Intel MEI client information struct
- */
-struct mei_client {
-	__u32 max_msg_length;
-	__u8 protocol_version;
-	__u8 reserved[3];
-};
-
-/*
- * IOCTL Connect Client Data structure
- */
-struct mei_connect_client_data {
-	union {
-		uuid_le in_client_uuid;
-		struct mei_client out_client_properties;
-	};
-};
-
-#endif /* _LINUX_MEI_H  */
diff --git a/drivers/staging/mei/mei.txt b/drivers/staging/mei/mei.txt
deleted file mode 100644
index 2785697da59d..000000000000
--- a/drivers/staging/mei/mei.txt
+++ /dev/null
@@ -1,215 +0,0 @@
-Intel(R) Management Engine Interface (Intel(R) MEI)
-=======================
-
-Introduction
-=======================
-
-The Intel Management Engine (Intel ME) is an isolated and protected computing
-resource (Co-processor) residing inside certain Intel chipsets. The Intel ME
-provides support for computer/IT management features. The feature set
-depends on the Intel chipset SKU.
-
-The Intel Management Engine Interface (Intel MEI, previously known as HECI)
-is the interface between the Host and Intel ME. This interface is exposed
-to the host as a PCI device. The Intel MEI Driver is in charge of the
-communication channel between a host application and the Intel ME feature.
-
-Each Intel ME feature (Intel ME Client) is addressed by a GUID/UUID and
-each client has its own protocol. The protocol is message-based with a
-header and payload up to 512 bytes.
-
-Prominent usage of the Intel ME Interface is to communicate with Intel(R)
-Active Management Technology (Intel AMT)implemented in firmware running on
-the Intel ME.
-
-Intel AMT provides the ability to manage a host remotely out-of-band (OOB)
-even when the operating system running on the host processor has crashed or
-is in a sleep state.
-
-Some examples of Intel AMT usage are:
-   - Monitoring hardware state and platform components
-   - Remote power off/on (useful for green computing or overnight IT
-     maintenance)
-   - OS updates
-   - Storage of useful platform information such as software assets
-   - Built-in hardware KVM
-   - Selective network isolation of Ethernet and IP protocol flows based
-     on policies set by a remote management console
-   - IDE device redirection from remote management console
-
-Intel AMT (OOB) communication is based on SOAP (deprecated
-starting with Release 6.0) over HTTP/S or WS-Management protocol over
-HTTP/S that are received from a remote management console application.
-
-For more information about Intel AMT:
-http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
-
-Intel MEI Driver
-=======================
-
-The driver exposes a misc device called /dev/mei.
-
-An application maintains communication with an Intel ME feature while
-/dev/mei is open. The binding to a specific features is performed by calling
-MEI_CONNECT_CLIENT_IOCTL, which passes the desired UUID.
-The number of instances of an Intel ME feature that can be opened
-at the same time depends on the Intel ME feature, but most of the
-features allow only a single instance.
-
-The Intel AMT Host Interface (Intel AMTHI) feature supports multiple
-simultaneous user applications. Therefore, the Intel MEI driver handles
-this internally by maintaining request queues for the applications.
-
-The driver is oblivious to data that is passed between firmware feature
-and host application.
-
-Because some of the Intel ME features can change the system
-configuration, the driver by default allows only a privileged
-user to access it.
-
-A code snippet for an application communicating with
-Intel AMTHI client:
-	struct mei_connect_client_data data;
-	fd = open(MEI_DEVICE);
-
-	data.d.in_client_uuid = AMTHI_UUID;
-
-	ioctl(fd, IOCTL_MEI_CONNECT_CLIENT, &data);
-
-	printf("Ver=%d, MaxLen=%ld\n",
-			data.d.in_client_uuid.protocol_version,
-			data.d.in_client_uuid.max_msg_length);
-
-	[...]
-
-	write(fd, amthi_req_data, amthi_req_data_len);
-
-	[...]
-
-	read(fd, &amthi_res_data, amthi_res_data_len);
-
-	[...]
-	close(fd);
-
-IOCTL:
-======
-The Intel MEI Driver supports the following IOCTL command:
-	IOCTL_MEI_CONNECT_CLIENT	Connect to firmware Feature (client).
-
-	usage:
-		struct mei_connect_client_data clientData;
-		ioctl(fd, IOCTL_MEI_CONNECT_CLIENT, &clientData);
-
-	inputs:
-		mei_connect_client_data struct contain the following
-		input field:
-
-		in_client_uuid -	UUID of the FW Feature that needs
-					to connect to.
-	outputs:
-		out_client_properties - Client Properties: MTU and Protocol Version.
-
-	error returns:
-		EINVAL	Wrong IOCTL Number
-		ENODEV	Device or Connection is not initialized or ready.
-			(e.g. Wrong UUID)
-		ENOMEM	Unable to allocate memory to client internal data.
-		EFAULT	Fatal Error (e.g. Unable to access user input data)
-		EBUSY	Connection Already Open
-
-	Notes:
-        max_msg_length (MTU) in client properties describes the maximum
-        data that can be sent or received. (e.g. if MTU=2K, can send
-        requests up to bytes 2k and received responses upto 2k bytes).
-
-Intel ME Applications:
-==============
-
-1) Intel Local Management Service (Intel LMS)
-
-	Applications running locally on the platform communicate with Intel AMT Release
-	2.0 and later releases in the same way that network applications do via SOAP
-	over HTTP (deprecated starting with Release 6.0) or with WS-Management over
-	SOAP over HTTP. This means that some Intel AMT features can be accessed from a
-	local application using the same network interface as a remote application
-	communicating with Intel AMT over the network.
-
-	When a local application sends a message addressed to the local Intel AMT host
-	name, the Intel LMS, which listens for traffic directed to the host name,
-	intercepts the message and routes it to the Intel MEI.
-	For more information:
-	http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
-	Under "About Intel AMT" => "Local Access"
-
-	For downloading Intel LMS:
-	http://software.intel.com/en-us/articles/download-the-latest-intel-amt-open-source-drivers/
-
-	The Intel LMS opens a connection using the Intel MEI driver to the Intel LMS
-	firmware feature using a defined UUID and then communicates with the feature
-	using a protocol called Intel AMT Port Forwarding Protocol(Intel APF protocol).
-	The protocol is used to maintain multiple sessions with Intel AMT from a
-	single application.
-
-	See the protocol specification in the Intel AMT Software Development Kit(SDK)
-	http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
-	Under "SDK Resources" => "Intel(R) vPro(TM) Gateway(MPS)"
-	=> "Information for Intel(R) vPro(TM) Gateway Developers"
-	=> "Description of the Intel AMT Port Forwarding (APF)Protocol"
-
-  2) Intel AMT Remote configuration using a Local Agent
-	A Local Agent enables IT personnel to configure Intel AMT out-of-the-box
-	without requiring installing additional data to enable setup. The remote
-	configuration process may involve an ISV-developed remote configuration
-	agent that runs on the host.
-	For more information:
-	http://software.intel.com/sites/manageability/AMT_Implementation_and_Reference_Guide
-	Under "Setup and Configuration of Intel AMT" =>
-	"SDK Tools Supporting Setup and Configuration" =>
-	"Using the Local Agent Sample"
-
-	An open source Intel AMT configuration utility,	implementing a local agent
-	that accesses the Intel MEI driver, can be found here:
-	http://software.intel.com/en-us/articles/download-the-latest-intel-amt-open-source-drivers/
-
-
-Intel AMT OS Health Watchdog:
-=============================
-The Intel AMT Watchdog is an OS Health (Hang/Crash) watchdog.
-Whenever the OS hangs or crashes, Intel AMT will send an event
-to any subscriber to this event. This mechanism means that
-IT knows when a platform crashes even when there is a hard failure on the host.
-
-The Intel AMT Watchdog is composed of two parts:
-	1) Firmware feature - receives the heartbeats
-	   and sends an event when the heartbeats stop.
-	2) Intel MEI driver - connects to the watchdog feature, configures the
-	   watchdog and sends the heartbeats.
-
-The Intel MEI driver uses the kernel watchdog to configure the Intel AMT
-Watchdog and to send heartbeats to it. The default timeout of the
-watchdog is 120 seconds.
-
-If the Intel AMT Watchdog feature does not exist (i.e. the connection failed),
-the Intel MEI driver will disable the sending of heartbeats.
-
-Supported Chipsets:
-==================
-7 Series Chipset Family
-6 Series Chipset Family
-5 Series Chipset Family
-4 Series Chipset Family
-Mobile 4 Series Chipset Family
-ICH9
-82946GZ/GL
-82G35 Express
-82Q963/Q965
-82P965/G965
-Mobile PM965/GM965
-Mobile GME965/GLE960
-82Q35 Express
-82G33/G31/P35/P31 Express
-82Q33 Express
-82X38/X48 Express
-
----
-linux-mei@linux.intel.com
diff --git a/drivers/staging/net/Kconfig b/drivers/staging/net/Kconfig
new file mode 100644
index 000000000000..a64e56b1898a
--- /dev/null
+++ b/drivers/staging/net/Kconfig
@@ -0,0 +1,38 @@
+if NETDEVICES
+
+if WAN
+
+config PC300
+	tristate "Cyclades-PC300 support (RS-232/V.35, X.21, T1/E1 boards)"
+	depends on HDLC && PCI && BROKEN
+	---help---
+	  This driver is broken because of struct tty_driver change.
+
+	  Driver for the Cyclades-PC300 synchronous communication boards.
+
+	  These boards provide synchronous serial interfaces to your
+	  Linux box (interfaces currently available are RS-232/V.35, X.21 and
+	  T1/E1). If you wish to support Multilink PPP, please select the
+	  option later and read the file README.mlppp provided by PC300
+	  package.
+
+	  To compile this as a module, choose M here: the module
+	  will be called pc300.
+
+	  If unsure, say N.
+
+config PC300_MLPPP
+	bool "Cyclades-PC300 MLPPP support"
+	depends on PC300 && PPP_MULTILINK && PPP_SYNC_TTY && HDLC_PPP
+	help
+	  Multilink PPP over the PC300 synchronous communication boards.
+
+comment "Cyclades-PC300 MLPPP support is disabled."
+	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+
+comment "Refer to the file README.mlppp, provided by PC300 package."
+	depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+
+endif # WAN
+
+endif # NETDEVICES
diff --git a/drivers/staging/net/Makefile b/drivers/staging/net/Makefile
new file mode 100644
index 000000000000..0799c43d5114
--- /dev/null
+++ b/drivers/staging/net/Makefile
@@ -0,0 +1,5 @@
+pc300-y				:= pc300_drv.o
+pc300-$(CONFIG_PC300_MLPPP)	+= pc300_tty.o
+pc300-objs			:= $(pc300-y)
+
+obj-$(CONFIG_PC300)		+= pc300.o
diff --git a/drivers/staging/net/TODO b/drivers/staging/net/TODO
new file mode 100644
index 000000000000..e3446f2ad7c7
--- /dev/null
+++ b/drivers/staging/net/TODO
@@ -0,0 +1,5 @@
+PC300
+The driver is very broken and cannot work with the current TTY layer. It is
+inevitable to convert it to the new TTY API.
+
+If no one steps in to adopt the driver, it will be removed in the 3.7 release.
diff --git a/drivers/net/wan/pc300-falc-lh.h b/drivers/staging/net/pc300-falc-lh.h
index 01ed23ca76c7..01ed23ca76c7 100644
--- a/drivers/net/wan/pc300-falc-lh.h
+++ b/drivers/staging/net/pc300-falc-lh.h
diff --git a/drivers/net/wan/pc300.h b/drivers/staging/net/pc300.h
index 2e4f84f6cad4..2e4f84f6cad4 100644
--- a/drivers/net/wan/pc300.h
+++ b/drivers/staging/net/pc300.h
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/staging/net/pc300_drv.c
index cb0f8d932b0c..cb0f8d932b0c 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/staging/net/pc300_drv.c
diff --git a/drivers/net/wan/pc300_tty.c b/drivers/staging/net/pc300_tty.c
index 4709f4228561..4709f4228561 100644
--- a/drivers/net/wan/pc300_tty.c
+++ b/drivers/staging/net/pc300_tty.c
diff --git a/drivers/staging/nvec/nvec.h b/drivers/staging/nvec/nvec.h
index a4c17b0e10cf..ba6ed8f4e8a3 100644
--- a/drivers/staging/nvec/nvec.h
+++ b/drivers/staging/nvec/nvec.h
@@ -42,7 +42,7 @@
  * enum nvec_event_size - The size of an event message
  * @NVEC_2BYTES: The message has one command byte and one data byte
  * @NVEC_3BYTES: The message has one command byte and two data bytes
- * @NVEC_VAR_SIZE: The message has one command byte, one count byte, and as
+ * @NVEC_VAR_SIZE: The message has one command byte, one count byte, and has
  *                 up to as many bytes as the number in the count byte. The
  *                 maximum is 32
  *
diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
index d91751f9ffe8..34afc16bc493 100644
--- a/drivers/staging/octeon/ethernet-rx.c
+++ b/drivers/staging/octeon/ethernet-rx.c
@@ -163,7 +163,7 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
 		/*
 		 * We received a packet with either an alignment error
 		 * or a FCS error. This may be signalling that we are
-		 * running 10Mbps with GMXX_RXX_FRM_CTL[PRE_CHK}
+		 * running 10Mbps with GMXX_RXX_FRM_CTL[PRE_CHK]
 		 * off. If this is the case we need to parse the
 		 * packet to determine if we can remove a non spec
 		 * preamble and generate a correct packet.
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index 5877b2c64e2a..5631dd9f8201 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -62,7 +62,7 @@
  * You can define GET_SKBUFF_QOS() to override how the skbuff output
  * function determines which output queue is used. The default
  * implementation always uses the base queue for the port. If, for
- * example, you wanted to use the skb->priority fieid, define
+ * example, you wanted to use the skb->priority field, define
  * GET_SKBUFF_QOS as: #define GET_SKBUFF_QOS(skb) ((skb)->priority)
  */
 #ifndef GET_SKBUFF_QOS
@@ -165,8 +165,8 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
 	/*
-	 * Prefetch the private data structure.  It is larger that one
-	 * cache line.
+	 * Prefetch the private data structure.  It is larger than the
+	 * one cache line.
 	 */
 	prefetch(priv);
 
@@ -291,8 +291,8 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 	 * See if we can put this skb in the FPA pool. Any strange
 	 * behavior from the Linux networking stack will most likely
 	 * be caused by a bug in the following code. If some field is
-	 * in use by the network stack and get carried over when a
-	 * buffer is reused, bad thing may happen.  If in doubt and
+	 * in use by the network stack and gets carried over when a
+	 * buffer is reused, bad things may happen.  If in doubt and
 	 * you dont need the absolute best performance, disable the
 	 * define REUSE_SKBUFFS_WITHOUT_FREE. The reuse of buffers has
 	 * shown a 25% increase in performance under some loads.
diff --git a/drivers/staging/octeon/ethernet-util.h b/drivers/staging/octeon/ethernet-util.h
index 144fb99bf50c..2da5ce17ead0 100644
--- a/drivers/staging/octeon/ethernet-util.h
+++ b/drivers/staging/octeon/ethernet-util.h
@@ -38,7 +38,7 @@ static inline void *cvm_oct_get_buffer_ptr(union cvmx_buf_ptr packet_ptr)
 }
 
 /**
- * INTERFACE - convert IPD port to locgical interface
+ * INTERFACE - convert IPD port to logical interface
  * @ipd_port: Port to check
  *
  * Returns Logical interface
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 60cba8194de3..18f7a790f73d 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -357,7 +357,7 @@ static void cvm_oct_common_set_multicast_list(struct net_device *dev)
 			/* Force accept multicast packets */
 			control.s.mcst = 2;
 		else
-			/* Force reject multicat packets */
+			/* Force reject multicast packets */
 			control.s.mcst = 1;
 
 		if (dev->flags & IFF_PROMISC)
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index 3d9199320d86..992275c0d87c 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -71,8 +71,8 @@ static int dcon_hw_init(struct dcon_priv *dcon, int is_init)
 
 	ver = dcon_read(dcon, DCON_REG_ID);
 	if ((ver >> 8) != 0xDC) {
-		printk(KERN_ERR "olpc-dcon:  DCON ID not 0xDCxx: 0x%04x "
-				"instead.\n", ver);
+		printk(KERN_ERR "olpc-dcon:  DCON ID not 0xDCxx: 0x%04x instead.\n",
+			ver);
 		rc = -ENXIO;
 		goto err;
 	}
@@ -134,10 +134,10 @@ static int dcon_bus_stabilize(struct dcon_priv *dcon, int is_powered_down)
 power_up:
 	if (is_powered_down) {
 		x = 1;
-		x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0);
+		x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0);
 		if (x) {
-			printk(KERN_WARNING "olpc-dcon:  unable to force dcon "
-					"to power up: %d!\n", x);
+			printk(KERN_WARNING "olpc-dcon:  unable to force dcon to power up: %d!\n",
+				x);
 			return x;
 		}
 		msleep(10); /* we'll be conservative */
@@ -150,11 +150,10 @@ power_up:
 		x = dcon_read(dcon, DCON_REG_ID);
 	}
 	if (x < 0) {
-		printk(KERN_ERR "olpc-dcon:  unable to stabilize dcon's "
-				"smbus, reasserting power and praying.\n");
+		printk(KERN_ERR "olpc-dcon:  unable to stabilize dcon's smbus, reasserting power and praying.\n");
 		BUG_ON(olpc_board_at_least(olpc_board(0xc2)));
 		x = 0;
-		olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0);
+		olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0);
 		msleep(100);
 		is_powered_down = 1;
 		goto power_up;	/* argh, stupid hardware.. */
@@ -220,10 +219,10 @@ static void dcon_sleep(struct dcon_priv *dcon, bool sleep)
 
 	if (sleep) {
 		x = 0;
-		x = olpc_ec_cmd(0x26, (unsigned char *) &x, 1, NULL, 0);
+		x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0);
 		if (x)
-			printk(KERN_WARNING "olpc-dcon:  unable to force dcon "
-					"to power down: %d!\n", x);
+			printk(KERN_WARNING "olpc-dcon:  unable to force dcon to power down: %d!\n",
+				x);
 		else
 			dcon->asleep = sleep;
 	} else {
@@ -232,8 +231,8 @@ static void dcon_sleep(struct dcon_priv *dcon, bool sleep)
 			dcon->disp_mode |= MODE_BL_ENABLE;
 		x = dcon_bus_stabilize(dcon, 1);
 		if (x)
-			printk(KERN_WARNING "olpc-dcon:  unable to reinit dcon"
-					" hardware: %d!\n", x);
+			printk(KERN_WARNING "olpc-dcon:  unable to reinit dcon hardware: %d!\n",
+				x);
 		else
 			dcon->asleep = sleep;
 
@@ -304,7 +303,7 @@ static void dcon_source_switch(struct work_struct *work)
 
 	switch (source) {
 	case DCON_SOURCE_CPU:
-		printk("dcon_source_switch to CPU\n");
+		printk(KERN_INFO "dcon_source_switch to CPU\n");
 		/* Enable the scanline interrupt bit */
 		if (dcon_write(dcon, DCON_REG_MODE,
 				dcon->disp_mode | MODE_SCAN_INT))
@@ -599,7 +598,7 @@ static int dcon_fb_notifier(struct notifier_block *self,
 	struct fb_event *evdata = data;
 	struct dcon_priv *dcon = container_of(self, struct dcon_priv,
 			fbevent_nb);
-	int *blank = (int *) evdata->data;
+	int *blank = (int *)evdata->data;
 	if (((event != FB_EVENT_BLANK) && (event != FB_EVENT_CONBLANK)) ||
 			dcon->ignore_fb_events)
 		return 0;
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
index cb6ce0cf92a0..c87fdfac4855 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
@@ -116,7 +116,7 @@ static int dcon_init_xo_1(struct dcon_priv *dcon)
 	cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS);
 	cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_STS);
 
-	/* FIXME:  Clear the posiitive status as well, just to be sure */
+	/* FIXME:  Clear the positive status as well, just to be sure */
 	cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_POSITIVE_EDGE_STS);
 	cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_POSITIVE_EDGE_STS);
 
diff --git a/drivers/staging/omapdrm/Makefile b/drivers/staging/omapdrm/Makefile
index d9cdc120d122..1ca0e0016de4 100644
--- a/drivers/staging/omapdrm/Makefile
+++ b/drivers/staging/omapdrm/Makefile
@@ -13,6 +13,7 @@ omapdrm-y := omap_drv.o \
 	omap_fb.o \
 	omap_fbdev.o \
 	omap_gem.o \
+	omap_gem_dmabuf.o \
 	omap_dmm_tiler.o \
 	tcm-sita.o
 
diff --git a/drivers/staging/omapdrm/omap_dmm_tiler.c b/drivers/staging/omapdrm/omap_dmm_tiler.c
index 1ecb6a73d790..9d83060e753a 100644
--- a/drivers/staging/omapdrm/omap_dmm_tiler.c
+++ b/drivers/staging/omapdrm/omap_dmm_tiler.c
@@ -347,7 +347,7 @@ struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w,
 	ret = tcm_reserve_2d(containers[fmt], w, h, align, &block->area);
 	if (ret) {
 		kfree(block);
-		return 0;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	/* add to allocation list */
@@ -371,7 +371,7 @@ struct tiler_block *tiler_reserve_1d(size_t size)
 	if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages,
 				&block->area)) {
 		kfree(block);
-		return 0;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	spin_lock(&omap_dmm->list_lock);
diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c
index 620b8d54223d..0d2acca376ca 100644
--- a/drivers/staging/omapdrm/omap_drv.c
+++ b/drivers/staging/omapdrm/omap_drv.c
@@ -746,7 +746,7 @@ static const struct file_operations omapdriver_fops = {
 
 static struct drm_driver omap_drm_driver = {
 		.driver_features =
-				DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM,
+				DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME,
 		.load = dev_load,
 		.unload = dev_unload,
 		.open = dev_open,
@@ -766,6 +766,10 @@ static struct drm_driver omap_drm_driver = {
 		.debugfs_init = omap_debugfs_init,
 		.debugfs_cleanup = omap_debugfs_cleanup,
 #endif
+		.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+		.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+		.gem_prime_export = omap_gem_prime_export,
+		.gem_prime_import = omap_gem_prime_import,
 		.gem_init_object = omap_gem_init_object,
 		.gem_free_object = omap_gem_free_object,
 		.gem_vm_ops = &omap_gem_vm_ops,
diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h
index b7e0f0773003..f238d574da0c 100644
--- a/drivers/staging/omapdrm/omap_drv.h
+++ b/drivers/staging/omapdrm/omap_drv.h
@@ -138,6 +138,8 @@ int omap_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
 int omap_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
 		struct drm_mode_create_dumb *args);
 int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma);
+int omap_gem_mmap_obj(struct drm_gem_object *obj,
+		struct vm_area_struct *vma);
 int omap_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
 int omap_gem_op_start(struct drm_gem_object *obj, enum omap_gem_op op);
 int omap_gem_op_finish(struct drm_gem_object *obj, enum omap_gem_op op);
@@ -145,12 +147,24 @@ int omap_gem_op_sync(struct drm_gem_object *obj, enum omap_gem_op op);
 int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op,
 		void (*fxn)(void *arg), void *arg);
 int omap_gem_roll(struct drm_gem_object *obj, uint32_t roll);
+void omap_gem_cpu_sync(struct drm_gem_object *obj, int pgoff);
+void omap_gem_dma_sync(struct drm_gem_object *obj,
+		enum dma_data_direction dir);
 int omap_gem_get_paddr(struct drm_gem_object *obj,
 		dma_addr_t *paddr, bool remap);
 int omap_gem_put_paddr(struct drm_gem_object *obj);
+int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages,
+		bool remap);
+int omap_gem_put_pages(struct drm_gem_object *obj);
+uint32_t omap_gem_flags(struct drm_gem_object *obj);
 uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj);
 size_t omap_gem_mmap_size(struct drm_gem_object *obj);
 
+struct dma_buf * omap_gem_prime_export(struct drm_device *dev,
+		struct drm_gem_object *obj, int flags);
+struct drm_gem_object * omap_gem_prime_import(struct drm_device *dev,
+		struct dma_buf *buffer);
+
 static inline int align_pitch(int pitch, int width, int bpp)
 {
 	int bytespp = (bpp + 7) / 8;
diff --git a/drivers/staging/omapdrm/omap_fb.c b/drivers/staging/omapdrm/omap_fb.c
index 04b235b6724a..74260f043ab1 100644
--- a/drivers/staging/omapdrm/omap_fb.c
+++ b/drivers/staging/omapdrm/omap_fb.c
@@ -167,7 +167,7 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer *fb, int x, int y,
 }
 
 /* Call for unpin 'a' (if not NULL), and pin 'b' (if not NULL).  Although
- * buffers to unpin are just just pushed to the unpin fifo so that the
+ * buffers to unpin are just pushed to the unpin fifo so that the
  * caller can defer unpin until vblank.
  *
  * Note if this fails (ie. something went very wrong!), all buffers are
@@ -197,8 +197,11 @@ int omap_framebuffer_replace(struct drm_framebuffer *a,
 			pa->paddr = 0;
 		}
 
-		if (pb && !ret)
+		if (pb && !ret) {
 			ret = omap_gem_get_paddr(pb->bo, &pb->paddr, true);
+			if (!ret)
+				omap_gem_dma_sync(pb->bo, DMA_TO_DEVICE);
+		}
 	}
 
 	if (ret) {
diff --git a/drivers/staging/omapdrm/omap_gem.c b/drivers/staging/omapdrm/omap_gem.c
index 921f058cc6a4..3a0d035a9e03 100644
--- a/drivers/staging/omapdrm/omap_gem.c
+++ b/drivers/staging/omapdrm/omap_gem.c
@@ -207,13 +207,27 @@ static inline bool is_shmem(struct drm_gem_object *obj)
 	return obj->filp != NULL;
 }
 
+/**
+ * shmem buffers that are mapped cached can simulate coherency via using
+ * page faulting to keep track of dirty pages
+ */
+static inline bool is_cached_coherent(struct drm_gem_object *obj)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	return is_shmem(obj) &&
+		((omap_obj->flags & OMAP_BO_CACHE_MASK) == OMAP_BO_CACHED);
+}
+
 static DEFINE_SPINLOCK(sync_lock);
 
 /** ensure backing pages are allocated */
 static int omap_gem_attach_pages(struct drm_gem_object *obj)
 {
+	struct drm_device *dev = obj->dev;
 	struct omap_gem_object *omap_obj = to_omap_bo(obj);
 	struct page **pages;
+	int i, npages = obj->size >> PAGE_SHIFT;
+	dma_addr_t *addrs;
 
 	WARN_ON(omap_obj->pages);
 
@@ -231,16 +245,18 @@ static int omap_gem_attach_pages(struct drm_gem_object *obj)
 	 * DSS, GPU, etc. are not cache coherent:
 	 */
 	if (omap_obj->flags & (OMAP_BO_WC|OMAP_BO_UNCACHED)) {
-		int i, npages = obj->size >> PAGE_SHIFT;
-		dma_addr_t *addrs = kmalloc(npages * sizeof(addrs), GFP_KERNEL);
+		addrs = kmalloc(npages * sizeof(addrs), GFP_KERNEL);
 		for (i = 0; i < npages; i++) {
-			addrs[i] = dma_map_page(obj->dev->dev, pages[i],
+			addrs[i] = dma_map_page(dev->dev, pages[i],
 					0, PAGE_SIZE, DMA_BIDIRECTIONAL);
 		}
-		omap_obj->addrs = addrs;
+	} else {
+		addrs = kzalloc(npages * sizeof(addrs), GFP_KERNEL);
 	}
 
+	omap_obj->addrs = addrs;
 	omap_obj->pages = pages;
+
 	return 0;
 }
 
@@ -258,14 +274,21 @@ static void omap_gem_detach_pages(struct drm_gem_object *obj)
 			dma_unmap_page(obj->dev->dev, omap_obj->addrs[i],
 					PAGE_SIZE, DMA_BIDIRECTIONAL);
 		}
-		kfree(omap_obj->addrs);
-		omap_obj->addrs = NULL;
 	}
 
+	kfree(omap_obj->addrs);
+	omap_obj->addrs = NULL;
+
 	_drm_gem_put_pages(obj, omap_obj->pages, true, false);
 	omap_obj->pages = NULL;
 }
 
+/* get buffer flags */
+uint32_t omap_gem_flags(struct drm_gem_object *obj)
+{
+	return to_omap_bo(obj)->flags;
+}
+
 /** get mmap offset */
 static uint64_t mmap_offset(struct drm_gem_object *obj)
 {
@@ -330,6 +353,7 @@ static int fault_1d(struct drm_gem_object *obj,
 			vma->vm_start) >> PAGE_SHIFT;
 
 	if (omap_obj->pages) {
+		omap_gem_cpu_sync(obj, pgoff);
 		pfn = page_to_pfn(omap_obj->pages[pgoff]);
 	} else {
 		BUG_ON(!(omap_obj->flags & OMAP_BO_DMA));
@@ -504,7 +528,6 @@ fail:
 /** We override mainly to fix up some of the vm mapping flags.. */
 int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma)
 {
-	struct omap_gem_object *omap_obj;
 	int ret;
 
 	ret = drm_gem_mmap(filp, vma);
@@ -513,8 +536,13 @@ int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma)
 		return ret;
 	}
 
-	/* after drm_gem_mmap(), it is safe to access the obj */
-	omap_obj = to_omap_bo(vma->vm_private_data);
+	return omap_gem_mmap_obj(vma->vm_private_data, vma);
+}
+
+int omap_gem_mmap_obj(struct drm_gem_object *obj,
+		struct vm_area_struct *vma)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
 
 	vma->vm_flags &= ~VM_PFNMAP;
 	vma->vm_flags |= VM_MIXEDMAP;
@@ -524,12 +552,31 @@ int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma)
 	} else if (omap_obj->flags & OMAP_BO_UNCACHED) {
 		vma->vm_page_prot = pgprot_noncached(vm_get_page_prot(vma->vm_flags));
 	} else {
+		/*
+		 * We do have some private objects, at least for scanout buffers
+		 * on hardware without DMM/TILER.  But these are allocated write-
+		 * combine
+		 */
+		if (WARN_ON(!obj->filp))
+			return -EINVAL;
+
+		/*
+		 * Shunt off cached objs to shmem file so they have their own
+		 * address_space (so unmap_mapping_range does what we want,
+		 * in particular in the case of mmap'd dmabufs)
+		 */
+		fput(vma->vm_file);
+		get_file(obj->filp);
+		vma->vm_pgoff = 0;
+		vma->vm_file  = obj->filp;
+
 		vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
 	}
 
-	return ret;
+	return 0;
 }
 
+
 /**
  * omap_gem_dumb_create	-	create a dumb buffer
  * @drm_file: our client file
@@ -639,6 +686,48 @@ fail:
 	return ret;
 }
 
+/* Sync the buffer for CPU access.. note pages should already be
+ * attached, ie. omap_gem_get_pages()
+ */
+void omap_gem_cpu_sync(struct drm_gem_object *obj, int pgoff)
+{
+	struct drm_device *dev = obj->dev;
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+
+	if (is_cached_coherent(obj) && omap_obj->addrs[pgoff]) {
+		dma_unmap_page(dev->dev, omap_obj->addrs[pgoff],
+				PAGE_SIZE, DMA_BIDIRECTIONAL);
+		omap_obj->addrs[pgoff] = 0;
+	}
+}
+
+/* sync the buffer for DMA access */
+void omap_gem_dma_sync(struct drm_gem_object *obj,
+		enum dma_data_direction dir)
+{
+	struct drm_device *dev = obj->dev;
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+
+	if (is_cached_coherent(obj)) {
+		int i, npages = obj->size >> PAGE_SHIFT;
+		struct page **pages = omap_obj->pages;
+		bool dirty = false;
+
+		for (i = 0; i < npages; i++) {
+			if (!omap_obj->addrs[i]) {
+				omap_obj->addrs[i] = dma_map_page(dev->dev, pages[i], 0,
+						PAGE_SIZE, DMA_BIDIRECTIONAL);
+				dirty = true;
+			}
+		}
+
+		if (dirty) {
+			unmap_mapping_range(obj->filp->f_mapping, 0,
+					omap_gem_mmap_size(obj), 1);
+		}
+	}
+}
+
 /* Get physical address for DMA.. if 'remap' is true, and the buffer is not
  * already contiguous, remap it to pin in physically contiguous memory.. (ie.
  * map in TILER)
@@ -703,6 +792,7 @@ int omap_gem_get_paddr(struct drm_gem_object *obj,
 		*paddr = omap_obj->paddr;
 	} else {
 		ret = -EINVAL;
+		goto fail;
 	}
 
 fail:
@@ -764,9 +854,27 @@ static int get_pages(struct drm_gem_object *obj, struct page ***pages)
 	return 0;
 }
 
-int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages)
+/* if !remap, and we don't have pages backing, then fail, rather than
+ * increasing the pin count (which we don't really do yet anyways,
+ * because we don't support swapping pages back out).  And 'remap'
+ * might not be quite the right name, but I wanted to keep it working
+ * similarly to omap_gem_get_paddr().  Note though that mutex is not
+ * aquired if !remap (because this can be called in atomic ctxt),
+ * but probably omap_gem_get_paddr() should be changed to work in the
+ * same way.  If !remap, a matching omap_gem_put_pages() call is not
+ * required (and should not be made).
+ */
+int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages,
+		bool remap)
 {
 	int ret;
+	if (!remap) {
+		struct omap_gem_object *omap_obj = to_omap_bo(obj);
+		if (!omap_obj->pages)
+			return -ENOMEM;
+		*pages = omap_obj->pages;
+		return 0;
+	}
 	mutex_lock(&obj->dev->struct_mutex);
 	ret = get_pages(obj, pages);
 	mutex_unlock(&obj->dev->struct_mutex);
diff --git a/drivers/staging/omapdrm/omap_gem_dmabuf.c b/drivers/staging/omapdrm/omap_gem_dmabuf.c
new file mode 100644
index 000000000000..42728e0cc194
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_gem_dmabuf.c
@@ -0,0 +1,220 @@
+/*
+ * drivers/staging/omapdrm/omap_gem_dmabuf.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include <linux/dma-buf.h>
+
+static struct sg_table *omap_gem_map_dma_buf(
+		struct dma_buf_attachment *attachment,
+		enum dma_data_direction dir)
+{
+	struct drm_gem_object *obj = attachment->dmabuf->priv;
+	struct sg_table *sg;
+	dma_addr_t paddr;
+	int ret;
+
+	sg = kzalloc(sizeof(*sg), GFP_KERNEL);
+	if (!sg)
+		return ERR_PTR(-ENOMEM);
+
+	/* camera, etc, need physically contiguous.. but we need a
+	 * better way to know this..
+	 */
+	ret = omap_gem_get_paddr(obj, &paddr, true);
+	if (ret)
+		goto out;
+
+	ret = sg_alloc_table(sg, 1, GFP_KERNEL);
+	if (ret)
+		goto out;
+
+	sg_init_table(sg->sgl, 1);
+	sg_dma_len(sg->sgl) = obj->size;
+	sg_set_page(sg->sgl, pfn_to_page(PFN_DOWN(paddr)), obj->size, 0);
+	sg_dma_address(sg->sgl) = paddr;
+
+	/* this should be after _get_paddr() to ensure we have pages attached */
+	omap_gem_dma_sync(obj, dir);
+
+out:
+	if (ret)
+		return ERR_PTR(ret);
+	return sg;
+}
+
+static void omap_gem_unmap_dma_buf(struct dma_buf_attachment *attachment,
+		struct sg_table *sg, enum dma_data_direction dir)
+{
+	struct drm_gem_object *obj = attachment->dmabuf->priv;
+	omap_gem_put_paddr(obj);
+	sg_free_table(sg);
+	kfree(sg);
+}
+
+static void omap_gem_dmabuf_release(struct dma_buf *buffer)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	/* release reference that was taken when dmabuf was exported
+	 * in omap_gem_prime_set()..
+	 */
+	drm_gem_object_unreference_unlocked(obj);
+}
+
+
+static int omap_gem_dmabuf_begin_cpu_access(struct dma_buf *buffer,
+		size_t start, size_t len, enum dma_data_direction dir)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	struct page **pages;
+	if (omap_gem_flags(obj) & OMAP_BO_TILED) {
+		/* TODO we would need to pin at least part of the buffer to
+		 * get de-tiled view.  For now just reject it.
+		 */
+		return -ENOMEM;
+	}
+	/* make sure we have the pages: */
+	return omap_gem_get_pages(obj, &pages, true);
+}
+
+static void omap_gem_dmabuf_end_cpu_access(struct dma_buf *buffer,
+		size_t start, size_t len, enum dma_data_direction dir)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	omap_gem_put_pages(obj);
+}
+
+
+static void *omap_gem_dmabuf_kmap_atomic(struct dma_buf *buffer,
+		unsigned long page_num)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	struct page **pages;
+	omap_gem_get_pages(obj, &pages, false);
+	omap_gem_cpu_sync(obj, page_num);
+	return kmap_atomic(pages[page_num]);
+}
+
+static void omap_gem_dmabuf_kunmap_atomic(struct dma_buf *buffer,
+		unsigned long page_num, void *addr)
+{
+	kunmap_atomic(addr);
+}
+
+static void *omap_gem_dmabuf_kmap(struct dma_buf *buffer,
+		unsigned long page_num)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	struct page **pages;
+	omap_gem_get_pages(obj, &pages, false);
+	omap_gem_cpu_sync(obj, page_num);
+	return kmap(pages[page_num]);
+}
+
+static void omap_gem_dmabuf_kunmap(struct dma_buf *buffer,
+		unsigned long page_num, void *addr)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	struct page **pages;
+	omap_gem_get_pages(obj, &pages, false);
+	kunmap(pages[page_num]);
+}
+
+/*
+ * TODO maybe we can split up drm_gem_mmap to avoid duplicating
+ * some here.. or at least have a drm_dmabuf_mmap helper.
+ */
+static int omap_gem_dmabuf_mmap(struct dma_buf *buffer,
+		struct vm_area_struct *vma)
+{
+	struct drm_gem_object *obj = buffer->priv;
+	int ret = 0;
+
+	if (WARN_ON(!obj->filp))
+		return -EINVAL;
+
+	/* Check for valid size. */
+	if (omap_gem_mmap_size(obj) < vma->vm_end - vma->vm_start) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	if (!obj->dev->driver->gem_vm_ops) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	vma->vm_flags |= VM_RESERVED | VM_IO | VM_PFNMAP | VM_DONTEXPAND;
+	vma->vm_ops = obj->dev->driver->gem_vm_ops;
+	vma->vm_private_data = obj;
+	vma->vm_page_prot =  pgprot_writecombine(vm_get_page_prot(vma->vm_flags));
+
+	/* Take a ref for this mapping of the object, so that the fault
+	 * handler can dereference the mmap offset's pointer to the object.
+	 * This reference is cleaned up by the corresponding vm_close
+	 * (which should happen whether the vma was created by this call, or
+	 * by a vm_open due to mremap or partial unmap or whatever).
+	 */
+	vma->vm_ops->open(vma);
+
+out_unlock:
+
+	return omap_gem_mmap_obj(obj, vma);
+}
+
+struct dma_buf_ops omap_dmabuf_ops = {
+		.map_dma_buf = omap_gem_map_dma_buf,
+		.unmap_dma_buf = omap_gem_unmap_dma_buf,
+		.release = omap_gem_dmabuf_release,
+		.begin_cpu_access = omap_gem_dmabuf_begin_cpu_access,
+		.end_cpu_access = omap_gem_dmabuf_end_cpu_access,
+		.kmap_atomic = omap_gem_dmabuf_kmap_atomic,
+		.kunmap_atomic = omap_gem_dmabuf_kunmap_atomic,
+		.kmap = omap_gem_dmabuf_kmap,
+		.kunmap = omap_gem_dmabuf_kunmap,
+		.mmap = omap_gem_dmabuf_mmap,
+};
+
+struct dma_buf * omap_gem_prime_export(struct drm_device *dev,
+		struct drm_gem_object *obj, int flags)
+{
+	return dma_buf_export(obj, &omap_dmabuf_ops, obj->size, 0600);
+}
+
+struct drm_gem_object * omap_gem_prime_import(struct drm_device *dev,
+		struct dma_buf *buffer)
+{
+	struct drm_gem_object *obj;
+
+	/* is this one of own objects? */
+	if (buffer->ops == &omap_dmabuf_ops) {
+		obj = buffer->priv;
+		/* is it from our device? */
+		if (obj->dev == dev) {
+			drm_gem_object_reference(obj);
+			return obj;
+		}
+	}
+
+	/*
+	 * TODO add support for importing buffers from other devices..
+	 * for now we don't need this but would be nice to add eventually
+	 */
+	return ERR_PTR(-EINVAL);
+}
diff --git a/drivers/staging/omapdrm/tcm-sita.c b/drivers/staging/omapdrm/tcm-sita.c
index 10d5ac3dae4b..efb609510540 100644
--- a/drivers/staging/omapdrm/tcm-sita.c
+++ b/drivers/staging/omapdrm/tcm-sita.c
@@ -200,7 +200,7 @@ static s32 sita_reserve_1d(struct tcm *tcm, u32 num_slots,
  *
  * @param w	width
  * @param h	height
- * @param area	pointer to the area that will be populated with the reesrved
+ * @param area	pointer to the area that will be populated with the reserved
  *		area
  *
  * @return 0 on success, non-0 error value on failure.
diff --git a/drivers/staging/ozwpan/README b/drivers/staging/ozwpan/README
index bb1a69b94541..7c055ec99544 100644
--- a/drivers/staging/ozwpan/README
+++ b/drivers/staging/ozwpan/README
@@ -9,7 +9,7 @@ technology.
 
 To operate the driver must be bound to a suitable network interface. This can
 be done when the module is loaded (specifying the name of the network interface
-as a paramter - e.g. 'insmod ozwpan g_net_dev=go0') or can be bound after
+as a parameter - e.g. 'insmod ozwpan g_net_dev=go0') or can be bound after
 loading using an ioctl call. See the ozappif.h file and the ioctls
 OZ_IOCTL_ADD_BINDING and OZ_IOCTL_REMOVE_BINDING.
 
diff --git a/drivers/staging/ozwpan/ozappif.h b/drivers/staging/ozwpan/ozappif.h
index af0273293872..1b59b0748c6b 100644
--- a/drivers/staging/ozwpan/ozappif.h
+++ b/drivers/staging/ozwpan/ozappif.h
@@ -11,13 +11,13 @@
 #define OZ_IOCTL_MAGIC	0xf4
 
 struct oz_mac_addr {
-	unsigned char a[6];
+	__u8 a[6];
 };
 
 #define OZ_MAX_PDS	8
 
 struct oz_pd_list {
-	int count;
+	__u32 count;
 	struct oz_mac_addr addr[OZ_MAX_PDS];
 };
 
@@ -27,18 +27,10 @@ struct oz_binding_info {
 	char name[OZ_MAX_BINDING_LEN];
 };
 
-struct oz_test {
-	int action;
-};
-
 #define OZ_IOCTL_GET_PD_LIST	_IOR(OZ_IOCTL_MAGIC, 0, struct oz_pd_list)
 #define OZ_IOCTL_SET_ACTIVE_PD	_IOW(OZ_IOCTL_MAGIC, 1, struct oz_mac_addr)
 #define OZ_IOCTL_GET_ACTIVE_PD	_IOR(OZ_IOCTL_MAGIC, 2, struct oz_mac_addr)
-#define OZ_IOCTL_CLEAR_EVENTS	_IO(OZ_IOCTL_MAGIC, 3)
-#define OZ_IOCTL_GET_EVENTS	_IOR(OZ_IOCTL_MAGIC, 4, struct oz_evtlist)
 #define OZ_IOCTL_ADD_BINDING	_IOW(OZ_IOCTL_MAGIC, 5, struct oz_binding_info)
-#define OZ_IOCTL_TEST		_IOWR(OZ_IOCTL_MAGIC, 6, struct oz_test)
-#define OZ_IOCTL_SET_EVENT_MASK	_IOW(OZ_IOCTL_MAGIC, 7, unsigned long)
 #define OZ_IOCTL_REMOVE_BINDING	_IOW(OZ_IOCTL_MAGIC, 8, struct oz_binding_info)
 #define OZ_IOCTL_MAX		9
 
diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c
index 1c380d687963..27325f74ecdc 100644
--- a/drivers/staging/ozwpan/ozcdev.c
+++ b/drivers/staging/ozwpan/ozcdev.c
@@ -41,9 +41,6 @@ struct oz_serial_ctx {
 };
 /*------------------------------------------------------------------------------
  */
-int g_taction;
-/*------------------------------------------------------------------------------
- */
 static struct oz_cdev g_cdev;
 /*------------------------------------------------------------------------------
  * Context: process and softirq
@@ -276,20 +273,6 @@ long oz_cdev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 				return -EFAULT;
 		}
 		break;
-#ifdef WANT_EVENT_TRACE
-	case OZ_IOCTL_CLEAR_EVENTS:
-		oz_events_clear();
-		break;
-	case OZ_IOCTL_GET_EVENTS:
-		rc = oz_events_copy((void __user *)arg);
-		break;
-	case OZ_IOCTL_SET_EVENT_MASK:
-		if (copy_from_user(&g_evt_mask, (void __user *)arg,
-			sizeof(unsigned long))) {
-			return -EFAULT;
-		}
-		break;
-#endif /* WANT_EVENT_TRACE */
 	case OZ_IOCTL_ADD_BINDING:
 	case OZ_IOCTL_REMOVE_BINDING: {
 			struct oz_binding_info b;
diff --git a/drivers/staging/ozwpan/ozevent.c b/drivers/staging/ozwpan/ozevent.c
index 73703d3e96bd..7f66b4f19b01 100644
--- a/drivers/staging/ozwpan/ozevent.c
+++ b/drivers/staging/ozwpan/ozevent.c
@@ -5,29 +5,46 @@
  */
 #include "ozconfig.h"
 #ifdef WANT_EVENT_TRACE
+#include <linux/module.h>
+#include <linux/debugfs.h>
 #include <linux/jiffies.h>
 #include <linux/uaccess.h>
 #include "oztrace.h"
 #include "ozevent.h"
+#include "ozappif.h"
 /*------------------------------------------------------------------------------
+ * Although the event mask is logically part of the oz_evtdev structure, it is
+ * needed outside of this file so define it seperately to avoid the need to
+ * export definition of struct oz_evtdev.
  */
-unsigned long g_evt_mask = 0xffffffff;
+u32 g_evt_mask;
 /*------------------------------------------------------------------------------
  */
 #define OZ_MAX_EVTS	2048	/* Must be power of 2 */
-DEFINE_SPINLOCK(g_eventlock);
-static int g_evt_in;
-static int g_evt_out;
-static int g_missed_events;
-static struct oz_event g_events[OZ_MAX_EVTS];
+struct oz_evtdev {
+	struct dentry *root_dir;
+	int evt_in;
+	int evt_out;
+	int missed_events;
+	int present;
+	atomic_t users;
+	spinlock_t lock;
+	struct oz_event evts[OZ_MAX_EVTS];
+};
+
+static struct oz_evtdev g_evtdev;
+
 /*------------------------------------------------------------------------------
  * Context: process
  */
 void oz_event_init(void)
 {
+	/* Because g_evtdev is static external all fields initally zero so no
+	 * need to reinitialised those.
+	 */
 	oz_trace("Event tracing initialized\n");
-	g_evt_in = g_evt_out = 0;
-	g_missed_events = 0;
+	spin_lock_init(&g_evtdev.lock);
+	atomic_set(&g_evtdev.users, 0);
 }
 /*------------------------------------------------------------------------------
  * Context: process
@@ -43,74 +60,136 @@ void oz_event_log2(u8 evt, u8 ctx1, u16 ctx2, void *ctx3, unsigned ctx4)
 {
 	unsigned long irqstate;
 	int ix;
-	spin_lock_irqsave(&g_eventlock, irqstate);
-	ix = (g_evt_in + 1) & (OZ_MAX_EVTS - 1);
-	if (ix != g_evt_out) {
-		struct oz_event *e = &g_events[g_evt_in];
+	spin_lock_irqsave(&g_evtdev.lock, irqstate);
+	ix = (g_evtdev.evt_in + 1) & (OZ_MAX_EVTS - 1);
+	if (ix != g_evtdev.evt_out) {
+		struct oz_event *e = &g_evtdev.evts[g_evtdev.evt_in];
 		e->jiffies = jiffies;
 		e->evt = evt;
 		e->ctx1 = ctx1;
 		e->ctx2 = ctx2;
-		e->ctx3 = ctx3;
+		e->ctx3 = (__u32)(unsigned long)ctx3;
 		e->ctx4 = ctx4;
-		g_evt_in = ix;
+		g_evtdev.evt_in = ix;
 	} else {
-		g_missed_events++;
+		g_evtdev.missed_events++;
 	}
-	spin_unlock_irqrestore(&g_eventlock, irqstate);
+	spin_unlock_irqrestore(&g_evtdev.lock, irqstate);
 }
 /*------------------------------------------------------------------------------
  * Context: process
  */
-int oz_events_copy(struct oz_evtlist __user *lst)
+static void oz_events_clear(struct oz_evtdev *dev)
 {
-	int first;
-	int ix;
-	struct hdr {
-		int count;
-		int missed;
-	} hdr;
-	ix = g_evt_out;
-	hdr.count = g_evt_in - ix;
-	if (hdr.count < 0)
-		hdr.count += OZ_MAX_EVTS;
-	if (hdr.count > OZ_EVT_LIST_SZ)
-		hdr.count = OZ_EVT_LIST_SZ;
-	hdr.missed = g_missed_events;
-	g_missed_events = 0;
-	if (copy_to_user((void __user *)lst, &hdr, sizeof(hdr)))
-		return -EFAULT;
-	first = OZ_MAX_EVTS - ix;
-	if (first > hdr.count)
-		first = hdr.count;
-	if (first) {
-		int sz = first*sizeof(struct oz_event);
-		void __user *p = (void __user *)lst->evts;
-		if (copy_to_user(p, &g_events[ix], sz))
-			return -EFAULT;
-		if (hdr.count > first) {
-			p = (void __user *)&lst->evts[first];
-			sz = (hdr.count-first)*sizeof(struct oz_event);
-			if (copy_to_user(p, g_events, sz))
-				return -EFAULT;
-		}
+	unsigned long irqstate;
+	oz_trace("Clearing events\n");
+	spin_lock_irqsave(&dev->lock, irqstate);
+	dev->evt_in = dev->evt_out = 0;
+	dev->missed_events = 0;
+	spin_unlock_irqrestore(&dev->lock, irqstate);
+}
+#ifdef CONFIG_DEBUG_FS
+/*------------------------------------------------------------------------------
+ * Context: process
+ */
+int oz_events_open(struct inode *inode, struct file *filp)
+{
+	oz_trace("oz_evt_open()\n");
+	oz_trace("Open flags: 0x%x\n", filp->f_flags);
+	if (atomic_add_return(1, &g_evtdev.users) == 1) {
+		oz_events_clear(&g_evtdev);
+		return nonseekable_open(inode, filp);
+	} else {
+		atomic_dec(&g_evtdev.users);
+		return -EBUSY;
 	}
-	ix += hdr.count;
-	if (ix >= OZ_MAX_EVTS)
-		ix -= OZ_MAX_EVTS;
-	g_evt_out = ix;
+}
+/*------------------------------------------------------------------------------
+ * Context: process
+ */
+int oz_events_release(struct inode *inode, struct file *filp)
+{
+	oz_events_clear(&g_evtdev);
+	atomic_dec(&g_evtdev.users);
+	g_evt_mask = 0;
+	oz_trace("oz_evt_release()\n");
 	return 0;
 }
 /*------------------------------------------------------------------------------
  * Context: process
  */
-void oz_events_clear(void)
+ssize_t oz_events_read(struct file *filp, char __user *buf, size_t count,
+		loff_t *fpos)
 {
-	unsigned long irqstate;
-	spin_lock_irqsave(&g_eventlock, irqstate);
-	g_evt_in = g_evt_out = 0;
-	g_missed_events = 0;
-	spin_unlock_irqrestore(&g_eventlock, irqstate);
+	struct oz_evtdev *dev = &g_evtdev;
+	int rc = 0;
+	int nb_evts = count / sizeof(struct oz_event);
+	int n;
+	int sz;
+
+	n = dev->evt_in - dev->evt_out;
+	if (n < 0)
+		n += OZ_MAX_EVTS;
+	if (nb_evts > n)
+		nb_evts = n;
+	if (nb_evts == 0)
+		goto out;
+	n = OZ_MAX_EVTS - dev->evt_out;
+	if (n > nb_evts)
+		n = nb_evts;
+	sz = n * sizeof(struct oz_event);
+	if (copy_to_user(buf, &dev->evts[dev->evt_out], sz)) {
+		rc = -EFAULT;
+		goto out;
+	}
+	if (n == nb_evts)
+		goto out2;
+	n = nb_evts - n;
+	if (copy_to_user(buf + sz, dev->evts, n * sizeof(struct oz_event))) {
+		rc = -EFAULT;
+		goto out;
+	}
+out2:
+	dev->evt_out = (dev->evt_out + nb_evts) & (OZ_MAX_EVTS - 1);
+	rc = nb_evts * sizeof(struct oz_event);
+out:
+	return rc;
 }
-#endif /* WANT_EVENT_TRACE */
+/*------------------------------------------------------------------------------
+ */
+const struct file_operations oz_events_fops = {
+	.owner =	THIS_MODULE,
+	.open =		oz_events_open,
+	.release =	oz_events_release,
+	.read =		oz_events_read,
+};
+/*------------------------------------------------------------------------------
+ * Context: process
+ */
+void oz_debugfs_init(void)
+{
+	struct dentry *parent;
 
+	parent = debugfs_create_dir("ozwpan", NULL);
+	if (parent  == NULL) {
+		oz_trace("Failed to create debugfs directory ozmo\n");
+		return;
+	} else {
+		g_evtdev.root_dir = parent;
+		if (debugfs_create_file("events", S_IRUSR, parent, NULL,
+						&oz_events_fops) == NULL)
+			oz_trace("Failed to create file ozmo/events\n");
+		if (debugfs_create_x32("event_mask", S_IRUSR | S_IWUSR, parent,
+							&g_evt_mask) == NULL)
+			oz_trace("Failed to create file ozmo/event_mask\n");
+	}
+}
+/*------------------------------------------------------------------------------
+ * Context: process
+ */
+void oz_debugfs_remove(void)
+{
+	debugfs_remove_recursive(g_evtdev.root_dir);
+}
+#endif /* CONFIG_DEBUG_FS */
+#endif /* WANT_EVENT_TRACE */
diff --git a/drivers/staging/ozwpan/ozevent.h b/drivers/staging/ozwpan/ozevent.h
index f033d014c6f3..32f6f9859c41 100644
--- a/drivers/staging/ozwpan/ozevent.h
+++ b/drivers/staging/ozwpan/ozevent.h
@@ -9,23 +9,24 @@
 #include "ozeventdef.h"
 
 #ifdef WANT_EVENT_TRACE
-extern unsigned long g_evt_mask;
+extern u32 g_evt_mask;
 void oz_event_init(void);
 void oz_event_term(void);
 void oz_event_log2(u8 evt, u8 ctx1, u16 ctx2, void *ctx3, unsigned ctx4);
+void oz_debugfs_init(void);
+void oz_debugfs_remove(void);
 #define oz_event_log(__evt, __ctx1, __ctx2, __ctx3, __ctx4) \
 	do { \
 		if ((1<<(__evt)) & g_evt_mask) \
 			oz_event_log2(__evt, __ctx1, __ctx2, __ctx3, __ctx4); \
 	} while (0)
-int oz_events_copy(struct oz_evtlist __user *lst);
-void oz_events_clear(void);
+
 #else
 #define oz_event_init()
 #define oz_event_term()
 #define oz_event_log(__evt, __ctx1, __ctx2, __ctx3, __ctx4)
-#define oz_events_copy(__lst)
-#define oz_events_clear()
+#define oz_debugfs_init()
+#define oz_debugfs_remove()
 #endif /* WANT_EVENT_TRACE */
 
 #endif /* _OZEVENT_H */
diff --git a/drivers/staging/ozwpan/ozeventdef.h b/drivers/staging/ozwpan/ozeventdef.h
index a880288bab11..4b938981671a 100644
--- a/drivers/staging/ozwpan/ozeventdef.h
+++ b/drivers/staging/ozwpan/ozeventdef.h
@@ -29,19 +29,12 @@
 #define OZ_EVT_DEBUG		20
 
 struct oz_event {
-	unsigned long jiffies;
-	unsigned char evt;
-	unsigned char ctx1;
-	unsigned short ctx2;
-	void *ctx3;
-	unsigned ctx4;
-};
-
-#define OZ_EVT_LIST_SZ	64
-struct oz_evtlist {
-	int count;
-	int missed;
-	struct oz_event evts[OZ_EVT_LIST_SZ];
+	__u32 jiffies;
+	__u8 evt;
+	__u8 ctx1;
+	__u16 ctx2;
+	__u32 ctx3;
+	__u32 ctx4;
 };
 
 #endif /* _OZEVENTDEF_H */
diff --git a/drivers/staging/ozwpan/ozhcd.c b/drivers/staging/ozwpan/ozhcd.c
index 750b14eb505e..251f07c39a6b 100644
--- a/drivers/staging/ozwpan/ozhcd.c
+++ b/drivers/staging/ozwpan/ozhcd.c
@@ -1416,7 +1416,7 @@ static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb,
 			oz_trace("USB_REQ_SET_CONFIGURATION - req\n");
 			break;
 		case USB_REQ_GET_CONFIGURATION:
-			/* We short curcuit this case and reply directly since
+			/* We short circuit this case and reply directly since
 			 * we have the selected configuration number cached.
 			 */
 			oz_event_log(OZ_EVT_CTRL_LOCAL, setup->bRequest, 0, 0,
@@ -1432,7 +1432,7 @@ static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb,
 			}
 			break;
 		case USB_REQ_GET_INTERFACE:
-			/* We short curcuit this case and reply directly since
+			/* We short circuit this case and reply directly since
 			 * we have the selected interface alternative cached.
 			 */
 			oz_event_log(OZ_EVT_CTRL_LOCAL, setup->bRequest, 0, 0,
@@ -1463,7 +1463,7 @@ static void oz_process_ep0_urb(struct oz_hcd *ozhcd, struct urb *urb,
 			rc = -ENOMEM;
 		} else {
 			/* Note: we are queuing the request after we have
-			 * submitted it to be tranmitted. If the request were
+			 * submitted it to be transmitted. If the request were
 			 * to complete before we queued it then it would not
 			 * be found in the queue. It seems impossible for
 			 * this to happen but if it did the request would
diff --git a/drivers/staging/ozwpan/ozmain.c b/drivers/staging/ozwpan/ozmain.c
index aaf2ccc0bcfb..7579645d642a 100644
--- a/drivers/staging/ozwpan/ozmain.c
+++ b/drivers/staging/ozwpan/ozmain.c
@@ -33,6 +33,9 @@ static int __init ozwpan_init(void)
 	oz_protocol_init(g_net_dev);
 	oz_app_enable(OZ_APPID_USB, 1);
 	oz_apps_init();
+#ifdef CONFIG_DEBUG_FS
+	oz_debugfs_init();
+#endif
 	return 0;
 }
 /*------------------------------------------------------------------------------
@@ -44,6 +47,9 @@ static void __exit ozwpan_exit(void)
 	oz_apps_term();
 	oz_cdev_deregister();
 	oz_event_term();
+#ifdef CONFIG_DEBUG_FS
+	oz_debugfs_remove();
+#endif
 }
 /*------------------------------------------------------------------------------
  */
@@ -53,6 +59,6 @@ module_exit(ozwpan_exit);
 
 MODULE_AUTHOR("Chris Kelly");
 MODULE_DESCRIPTION("Ozmo Devices USB over WiFi hcd driver");
-MODULE_VERSION("1.0.8");
+MODULE_VERSION("1.0.9");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/staging/ozwpan/ozusbsvc.c b/drivers/staging/ozwpan/ozusbsvc.c
index 9e74f9602384..8fa7f256ad8c 100644
--- a/drivers/staging/ozwpan/ozusbsvc.c
+++ b/drivers/staging/ozwpan/ozusbsvc.c
@@ -7,7 +7,7 @@
  * The implementation of this service is split into two parts the first of which
  * is protocol independent and the second contains protocol specific details.
  * This split is to allow alternative protocols to be defined.
- * The implemenation of this service uses ozhcd.c to implement a USB HCD.
+ * The implementation of this service uses ozhcd.c to implement a USB HCD.
  * -----------------------------------------------------------------------------
  */
 #include <linux/init.h>
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index 6183573f112f..7365089a33e8 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -754,7 +754,7 @@ static void lcd_backlight(int on)
 	if (lcd_bl_pin == PIN_NONE)
 		return;
 
-	/* The backlight is activated by seting the AUTOFEED line to +5V  */
+	/* The backlight is activated by setting the AUTOFEED line to +5V  */
 	spin_lock(&pprt_lock);
 	bits.bl = on;
 	panel_set_bits();
diff --git a/drivers/staging/quatech_usb2/Kconfig b/drivers/staging/quatech_usb2/Kconfig
deleted file mode 100644
index 1494f42f3da0..000000000000
--- a/drivers/staging/quatech_usb2/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config USB_SERIAL_QUATECH_USB2
-	tristate "USB Quatech xSU2-[14]00 USB Serial Driver"
-	depends on USB_SERIAL
-	help
-	  Say Y here if you want to use a Quatech USB2.0 to serial adaptor. This
-	  driver supports the SSU2-100, DSU2-100, DSU2-400, QSU2-100, QSU2-400,
-	  ESU2-400 and ESU2-100 USB2.0 to RS232 / 485 / 422 serial adaptors.
-
-	  Some hardware has an incorrect product string and announces itself as
-	  ESU-100 (which uses the serqt driver) even though it is an ESU2-100.
-	  Check the label on the bottom of your device.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called quatech_usb2 .
-
diff --git a/drivers/staging/quatech_usb2/Makefile b/drivers/staging/quatech_usb2/Makefile
deleted file mode 100644
index bcd1f890d163..000000000000
--- a/drivers/staging/quatech_usb2/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_SERIAL_QUATECH_USB2)		+= quatech_usb2.o
diff --git a/drivers/staging/quatech_usb2/TODO b/drivers/staging/quatech_usb2/TODO
deleted file mode 100644
index 67f61dbe14ac..000000000000
--- a/drivers/staging/quatech_usb2/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-Incomplete list of things that this driver does not yet implement completely or
-at all. some of these may not be possible to implement because the hardware
-support does not exist. Others may be possible, but the magic control codes to
-make them happen are unknown, and some may just need the driver support to
-implement them writing.
-
-* Mark/Space parity is not implemented (reported back correctly)
-* IXANY flow control mode is not implemented (flag ignored completely)
diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
deleted file mode 100644
index bb977e00cc86..000000000000
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ /dev/null
@@ -1,1976 +0,0 @@
-/*
- * Driver for Quatech Inc USB2.0 to serial adaptors. Largely unrelated to the
- * serqt_usb driver, based on a re-write of the vendor supplied serqt_usb2 code,
- * which is unrelated to the serqt_usb2 in the staging kernel
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/serial.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-#include <linux/uaccess.h>
-
-static bool debug;
-
-/* Version Information */
-#define DRIVER_VERSION "v2.00"
-#define DRIVER_AUTHOR "Tim Gobeli, Quatech, Inc"
-#define DRIVER_DESC "Quatech USB 2.0 to Serial Driver"
-
-/* vendor and device IDs */
-#define	USB_VENDOR_ID_QUATECH 0x061d	/* Quatech VID */
-#define QUATECH_SSU2_100 0xC120		/* RS232 single port */
-#define QUATECH_DSU2_100 0xC140		/* RS232 dual port */
-#define QUATECH_DSU2_400 0xC150		/* RS232/422/485 dual port */
-#define QUATECH_QSU2_100 0xC160		/* RS232 four port */
-#define QUATECH_QSU2_400 0xC170		/* RS232/422/485 four port */
-#define QUATECH_ESU2_100 0xC1A0		/* RS232 eight port */
-#define QUATECH_ESU2_400 0xC180		/* RS232/422/485 eight port */
-
-/* magic numbers go here, when we find out which ones are needed */
-
-#define QU2BOXPWRON 0x8000		/* magic number to turn FPGA power on */
-#define QU2BOX232 0x40			/* RS232 mode on MEI devices */
-#define QU2BOXSPD9600 0x60		/* set speed to 9600 baud */
-#define QT2_FIFO_DEPTH 1024			/* size of hardware fifos */
-#define QT2_TX_HEADER_LENGTH	5
-/* length of the header sent to the box with each write URB */
-
-/* directions for USB transfers */
-#define USBD_TRANSFER_DIRECTION_IN    0xc0
-#define USBD_TRANSFER_DIRECTION_OUT   0x40
-
-/* special Quatech command IDs. These are pushed down the
- USB control pipe to get the box on the end to do things */
-#define QT_SET_GET_DEVICE		0xc2
-#define QT_OPEN_CLOSE_CHANNEL		0xca
-/*#define QT_GET_SET_PREBUF_TRIG_LVL	0xcc
-#define QT_SET_ATF			0xcd*/
-#define QT2_GET_SET_REGISTER			0xc0
-#define QT2_GET_SET_UART			0xc1
-#define QT2_HW_FLOW_CONTROL_MASK		0xc5
-#define QT2_SW_FLOW_CONTROL_MASK		0xc6
-#define QT2_SW_FLOW_CONTROL_DISABLE		0xc7
-#define QT2_BREAK_CONTROL			0xc8
-#define QT2_STOP_RECEIVE			0xe0
-#define QT2_FLUSH_DEVICE			0xc4
-#define QT2_GET_SET_QMCR			0xe1
-
-/* sorts of flush we can do on */
-#define QT2_FLUSH_RX			0x00
-#define QT2_FLUSH_TX			0x01
-
-/* port setting constants, used to set up serial port speeds, flow
- * control and so on */
-#define QT2_SERIAL_MCR_DTR	0x01
-#define QT2_SERIAL_MCR_RTS	0x02
-#define QT2_SERIAL_MCR_LOOP	0x10
-
-#define QT2_SERIAL_MSR_CTS	0x10
-#define QT2_SERIAL_MSR_CD	0x80
-#define QT2_SERIAL_MSR_RI	0x40
-#define QT2_SERIAL_MSR_DSR	0x20
-#define QT2_SERIAL_MSR_MASK	0xf0
-
-#define QT2_SERIAL_8_DATA	0x03
-#define QT2_SERIAL_7_DATA	0x02
-#define QT2_SERIAL_6_DATA	0x01
-#define QT2_SERIAL_5_DATA	0x00
-
-#define QT2_SERIAL_ODD_PARITY	0x08
-#define QT2_SERIAL_EVEN_PARITY	0x18
-#define QT2_SERIAL_TWO_STOPB	0x04
-#define QT2_SERIAL_ONE_STOPB	0x00
-
-#define QT2_MAX_BAUD_RATE	921600
-#define QT2_MAX_BAUD_REMAINDER	4608
-
-#define QT2_SERIAL_LSR_OE	0x02
-#define QT2_SERIAL_LSR_PE	0x04
-#define QT2_SERIAL_LSR_FE	0x08
-#define QT2_SERIAL_LSR_BI	0x10
-
-/* value of Line Status Register when UART has completed
- * emptying data out on the line */
-#define QT2_LSR_TEMT     0x40
-
-/* register numbers on each UART, for use with  qt2_box_[get|set]_register*/
-#define  QT2_XMT_HOLD_REGISTER          0x00
-#define  QT2_XVR_BUFFER_REGISTER        0x00
-#define  QT2_FIFO_CONTROL_REGISTER      0x02
-#define  QT2_LINE_CONTROL_REGISTER      0x03
-#define  QT2_MODEM_CONTROL_REGISTER     0x04
-#define  QT2_LINE_STATUS_REGISTER       0x05
-#define  QT2_MODEM_STATUS_REGISTER      0x06
-
-/* handy macros for doing escape sequence parsing on data reads */
-#define THISCHAR	((unsigned char *)(urb->transfer_buffer))[i]
-#define NEXTCHAR	((unsigned char *)(urb->transfer_buffer))[i + 1]
-#define THIRDCHAR	((unsigned char *)(urb->transfer_buffer))[i + 2]
-#define FOURTHCHAR	((unsigned char *)(urb->transfer_buffer))[i + 3]
-#define FIFTHCHAR	((unsigned char *)(urb->transfer_buffer))[i + 4]
-
-static const struct usb_device_id quausb2_id_table[] = {
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_100)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_400)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_100)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_400)},
-	{}	/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, quausb2_id_table);
-
-/* custom structures we need go here */
-static struct usb_driver quausb2_usb_driver = {
-	.name = "quatech-usb2-serial",
-	.probe = usb_serial_probe,
-	.disconnect = usb_serial_disconnect,
-	.id_table = quausb2_id_table,
-};
-
-/**
- * quatech2_port: Structure in which to keep all the messy stuff that this
- * driver needs alongside the usb_serial_port structure
- * @read_urb_busy: Flag indicating that port->read_urb is in use
- * @close_pending: flag indicating that this port is in the process of
- * being closed (and so no new reads / writes should be started).
- * @shadowLSR: Last received state of the line status register, holds the
- * value of the line status flags from the port
- * @shadowMSR: Last received state of the modem status register, holds
- * the value of the modem status received from the port
- * @rcv_flush: Flag indicating that a receive flush has occurred on
- * the hardware.
- * @xmit_flush: Flag indicating that a transmit flush has been processed by
- * the hardware.
- * @tx_pending_bytes: Number of bytes waiting to be sent. This total
- * includes the size (excluding header) of URBs that have been submitted but
- * have not yet been sent to to the device, and bytes that have been sent out
- * of the port but not yet reported sent by the "xmit_empty" messages (which
- * indicate the number of bytes sent each time they are received, despite the
- * misleading name).
- * - Starts at zero when port is initialised.
- * - is incremented by the size of the data to be written (no headers)
- * each time a write urb is dispatched.
- * - is decremented each time a "transmit empty" message is received
- * by the driver in the data stream.
- * @lock: Mutex to lock access to this structure when we need to ensure that
- * races don't occur to access bits of it.
- * @open_count: The number of uses of the port currently having
- * it open, i.e. the reference count.
- */
-struct quatech2_port {
-	int	magic;
-	bool	read_urb_busy;
-	bool	close_pending;
-	__u8	shadowLSR;
-	__u8	shadowMSR;
-	bool	rcv_flush;
-	bool	xmit_flush;
-	int	tx_pending_bytes;
-	struct mutex modelock;
-	int	open_count;
-
-	char	active;		/* someone has this device open */
-	unsigned char		*xfer_to_tty_buffer;
-	wait_queue_head_t	wait;
-	__u8	shadowLCR;	/* last LCR value received */
-	__u8	shadowMCR;	/* last MCR value received */
-	char	RxHolding;
-	struct semaphore	pend_xmit_sem;	/* locks this structure */
-	spinlock_t lock;
-};
-
-/**
- * Structure to hold device-wide internal status information
- * @param ReadBulkStopped The last bulk read attempt ended in tears
- * @param open_ports The number of serial ports currently in use on the box
- * @param current_port Pointer to the serial port structure of the port which
- * the read stream is currently directed to. Escape sequences in the read
- * stream will change this around as data arrives from different ports on the
- * box
- * @buffer_size: The max size buffer each URB can take, used to set the size of
- * the buffers allocated for writing to each port on the device (we need to
- * store this because it is known only to the endpoint, but used each time a
- * port is opened and a new buffer is allocated.
- */
-struct quatech2_dev {
-	bool	ReadBulkStopped;
-	char	open_ports;
-	struct usb_serial_port *current_port;
-	int	buffer_size;
-};
-
-/* structure which holds line and modem status flags */
-struct qt2_status_data {
-	__u8 line_status;
-	__u8 modem_status;
-};
-
-/* Function prototypes */
-static int qt2_boxpoweron(struct usb_serial *serial);
-static int qt2_boxsetQMCR(struct usb_serial *serial, __u16 Uart_Number,
-			__u8 QMCR_Value);
-static int port_paranoia_check(struct usb_serial_port *port,
-			const char *function);
-static int serial_paranoia_check(struct usb_serial *serial,
-			 const char *function);
-static inline struct quatech2_port *qt2_get_port_private(struct usb_serial_port
-			*port);
-static inline void qt2_set_port_private(struct usb_serial_port *port,
-			struct quatech2_port *data);
-static inline struct quatech2_dev *qt2_get_dev_private(struct usb_serial
-			*serial);
-static inline void qt2_set_dev_private(struct usb_serial *serial,
-			struct quatech2_dev *data);
-static int qt2_openboxchannel(struct usb_serial *serial, __u16
-			Uart_Number, struct qt2_status_data *pDeviceData);
-static int qt2_closeboxchannel(struct usb_serial *serial, __u16
-			Uart_Number);
-static int qt2_conf_uart(struct usb_serial *serial,  unsigned short Uart_Number,
-			 unsigned short divisor, unsigned char LCR);
-static void qt2_read_bulk_callback(struct urb *urb);
-static void qt2_write_bulk_callback(struct urb *urb);
-static void qt2_process_line_status(struct usb_serial_port *port,
-			      unsigned char LineStatus);
-static void qt2_process_modem_status(struct usb_serial_port *port,
-			       unsigned char ModemStatus);
-static void qt2_process_xmit_empty(struct usb_serial_port *port,
-	unsigned char fourth_char, unsigned char fifth_char);
-static void qt2_process_port_change(struct usb_serial_port *port,
-			      unsigned char New_Current_Port);
-static void qt2_process_rcv_flush(struct usb_serial_port *port);
-static void qt2_process_xmit_flush(struct usb_serial_port *port);
-static void qt2_process_rx_char(struct usb_serial_port *port,
-				unsigned char data);
-static int qt2_box_get_register(struct usb_serial *serial,
-		unsigned char uart_number, unsigned short register_num,
-		__u8 *pValue);
-static int qt2_box_set_register(struct usb_serial *serial,
-		unsigned short Uart_Number, unsigned short Register_Num,
-		unsigned short Value);
-static int qt2_boxsetuart(struct usb_serial *serial, unsigned short Uart_Number,
-		unsigned short default_divisor, unsigned char default_LCR);
-static int qt2_boxsethw_flowctl(struct usb_serial *serial,
-		unsigned int UartNumber, bool bSet);
-static int qt2_boxsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber,
-		unsigned char stop_char,  unsigned char start_char);
-static int qt2_boxunsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber);
-static int qt2_boxstoprx(struct usb_serial *serial, unsigned short uart_number,
-			 unsigned short stop);
-
-/* implementation functions, roughly in order of use, are here */
-static int qt2_calc_num_ports(struct usb_serial *serial)
-{
-	int num_ports;
-	int flag_as_400;
-	switch (serial->dev->descriptor.idProduct) {
-	case QUATECH_SSU2_100:
-		num_ports = 1;
-		break;
-
-	case QUATECH_DSU2_400:
-		flag_as_400 = true;
-	case QUATECH_DSU2_100:
-		num_ports = 2;
-	break;
-
-	case QUATECH_QSU2_400:
-		flag_as_400 = true;
-	case QUATECH_QSU2_100:
-		num_ports = 4;
-	break;
-
-	case QUATECH_ESU2_400:
-		flag_as_400 = true;
-	case QUATECH_ESU2_100:
-		num_ports = 8;
-	break;
-	default:
-	num_ports = 1;
-	break;
-	}
-	return num_ports;
-}
-
-static int qt2_attach(struct usb_serial *serial)
-{
-	struct usb_serial_port *port;
-	struct quatech2_port *qt2_port;	/* port-specific private data pointer */
-	struct quatech2_dev  *qt2_dev;	/* dev-specific private data pointer */
-	int i;
-	/* stuff for storing endpoint addresses now */
-	struct usb_endpoint_descriptor *endpoint;
-	struct usb_host_interface *iface_desc;
-	struct usb_serial_port *port0;	/* first port structure on device */
-
-	/* check how many endpoints there are on the device, for
-	 * sanity's sake */
-	dbg("%s(): Endpoints: %d bulk in, %d bulk out, %d interrupt in",
-			__func__, serial->num_bulk_in,
-			serial->num_bulk_out, serial->num_interrupt_in);
-	if ((serial->num_bulk_in != 1) || (serial->num_bulk_out != 1)) {
-		dbg("Device has wrong number of bulk endpoints!");
-		return -ENODEV;
-	}
-	iface_desc = serial->interface->cur_altsetting;
-
-	/* Set up per-device private data, storing extra data alongside
-	 * struct usb_serial */
-	qt2_dev = kzalloc(sizeof(*qt2_dev), GFP_KERNEL);
-	if (!qt2_dev) {
-		dbg("%s: kmalloc for quatech2_dev failed!",
-		    __func__);
-		return -ENOMEM;
-	}
-	qt2_dev->open_ports = 0;	/* no ports open */
-	qt2_set_dev_private(serial, qt2_dev);	/* store private data */
-
-	/* Now setup per port private data, which replaces all the things
-	 * that quatech added to standard kernel structures in their driver */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		qt2_port = kzalloc(sizeof(*qt2_port), GFP_KERNEL);
-		if (!qt2_port) {
-			dbg("%s: kmalloc for quatech2_port (%d) failed!.",
-			    __func__, i);
-			return -ENOMEM;
-		}
-		/* initialise stuff in the structure */
-		qt2_port->open_count = 0;	/* port is not open */
-		spin_lock_init(&qt2_port->lock);
-		mutex_init(&qt2_port->modelock);
-		qt2_set_port_private(port, qt2_port);
-	}
-
-	/* gain access to port[0]'s structure because we want to store
-	 * device-level stuff in it */
-	if (serial_paranoia_check(serial, __func__))
-		return -ENODEV;
-	port0 = serial->port[0]; /* get the first port's device structure */
-
-	/* print endpoint addresses so we can check them later
-	 * by hand */
-	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
-		endpoint = &iface_desc->endpoint[i].desc;
-		if ((endpoint->bEndpointAddress & 0x80) &&
-			((endpoint->bmAttributes & 3) == 0x02)) {
-			/* we found a bulk in endpoint */
-			dbg("found bulk in at %#.2x",
-				endpoint->bEndpointAddress);
-		}
-
-		if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
-			((endpoint->bmAttributes & 3) == 0x02)) {
-			/* we found a bulk out endpoint */
-			dbg("found bulk out at %#.2x",
-				endpoint->bEndpointAddress);
-			qt2_dev->buffer_size = endpoint->wMaxPacketSize;
-			/* max size of URB needs recording for the device */
-		}
-	}	/* end printing endpoint addresses */
-
-	/* switch on power to the hardware */
-	if (qt2_boxpoweron(serial) < 0) {
-		dbg("qt2_boxpoweron() failed");
-		goto startup_error;
-	}
-	/* set all ports to RS232 mode */
-	for (i = 0; i < serial->num_ports; ++i) {
-		if (qt2_boxsetQMCR(serial, i, QU2BOX232) < 0) {
-			dbg("qt2_boxsetQMCR() on port %d failed",
-				i);
-			goto startup_error;
-		}
-	}
-
-	return 0;
-
-startup_error:
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		qt2_port = qt2_get_port_private(port);
-		kfree(qt2_port);
-		qt2_set_port_private(port, NULL);
-	}
-	qt2_dev = qt2_get_dev_private(serial);
-	kfree(qt2_dev);
-	qt2_set_dev_private(serial, NULL);
-
-	dbg("Exit fail %s\n", __func__);
-	return -EIO;
-}
-
-static void qt2_release(struct usb_serial *serial)
-{
-	struct usb_serial_port *port;
-	struct quatech2_port *qt_port;
-	int i;
-
-	dbg("enterting %s", __func__);
-
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		if (!port)
-			continue;
-
-		qt_port = usb_get_serial_port_data(port);
-		kfree(qt_port);
-		usb_set_serial_port_data(port, NULL);
-	}
-}
-/* This function is called once per serial port on the device, when
- * that port is opened by a userspace application.
- * The tty_struct and the usb_serial_port belong to this port,
- * i.e. there are multiple ones for a multi-port device.
- * However the usb_serial_port structure has a back-pointer
- * to the parent usb_serial structure which belongs to the device,
- * so we can access either the device-wide information or
- * any other port's information (because there are also forward
- * pointers) via that pointer.
- * This is most helpful if the device shares resources (e.g. end
- * points) between different ports
- */
-int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
-	struct usb_serial *serial;	/* device structure */
-	struct usb_serial_port *port0;	/* first port structure on device */
-	struct quatech2_port *port_extra;       /* extra data for this port */
-	struct quatech2_port *port0_extra;	/* extra data for first port */
-	struct quatech2_dev *dev_extra;		/* extra data for the device */
-	struct qt2_status_data ChannelData;
-	unsigned short default_divisor = QU2BOXSPD9600;
-	unsigned char  default_LCR = QT2_SERIAL_8_DATA;
-	int status;
-	int result;
-
-	if (port_paranoia_check(port, __func__))
-		return -ENODEV;
-
-	dbg("%s(): port %d", __func__, port->number);
-
-	serial = port->serial;	/* get the parent device structure */
-	if (serial_paranoia_check(serial, __func__)) {
-		dbg("usb_serial struct failed sanity check");
-		return -ENODEV;
-	}
-	dev_extra = qt2_get_dev_private(serial);
-	/* get the device private data */
-	if (dev_extra == NULL) {
-		dbg("device extra data pointer is null");
-		return -ENODEV;
-	}
-	port0 = serial->port[0]; /* get the first port's device structure */
-	if (port_paranoia_check(port0, __func__)) {
-		dbg("port0 usb_serial_port struct failed sanity check");
-		return -ENODEV;
-	}
-
-	port_extra = qt2_get_port_private(port);
-	port0_extra = qt2_get_port_private(port0);
-	if (port_extra == NULL || port0_extra == NULL) {
-		dbg("failed to get private data for port or port0");
-		return -ENODEV;
-	}
-
-	/* FIXME: are these needed?  Does it even do anything useful? */
-	/* get the modem and line status values from the UART */
-	status = qt2_openboxchannel(serial, port->number,
-			&ChannelData);
-	if (status < 0) {
-		dbg("qt2_openboxchannel on channel %d failed",
-		    port->number);
-		return status;
-	}
-	port_extra->shadowLSR = ChannelData.line_status &
-			(QT2_SERIAL_LSR_OE | QT2_SERIAL_LSR_PE |
-			QT2_SERIAL_LSR_FE | QT2_SERIAL_LSR_BI);
-	port_extra->shadowMSR = ChannelData.modem_status &
-			(QT2_SERIAL_MSR_CTS | QT2_SERIAL_MSR_DSR |
-			QT2_SERIAL_MSR_RI | QT2_SERIAL_MSR_CD);
-
-/*	port_extra->fifo_empty_flag = true;*/
-	dbg("qt2_openboxchannel on channel %d completed.",
-	    port->number);
-
-	/* Set Baud rate to default and turn off flow control here */
-	status = qt2_conf_uart(serial, port->number, default_divisor,
-				default_LCR);
-	if (status < 0) {
-		dbg("qt2_conf_uart() failed on channel %d",
-		    port->number);
-		return status;
-	}
-	dbg("qt2_conf_uart() completed on channel %d",
-		port->number);
-
-	/*
-	 * At this point we will need some end points to make further progress.
-	 * Handlily, the correct endpoint addresses have been filled out into
-	 * the usb_serial_port structure for us by the driver core, so we
-	 * already have access to them.
-	 * As there is only one bulk in and one bulk out end-point, these are in
-	 * port[0]'s structure, and the rest are uninitialised. Handily,
-	 * when we do a write to a port, we will use the same endpoint
-	 * regardless of the port, with a 5-byte header added on to
-	 * tell the box which port it should eventually come out of, so we only
-	 * need the one set of endpoints. We will have one URB per port for
-	 * writing, so that multiple ports can be writing at once.
-	 * Finally we need a bulk in URB to use for background reads from the
-	 * device, which will deal with uplink data from the box to host.
-	 */
-	dbg("port0 bulk in endpoint is %#.2x", port0->bulk_in_endpointAddress);
-	dbg("port0 bulk out endpoint is %#.2x",
-		port0->bulk_out_endpointAddress);
-
-	/* set up write_urb for bulk out transfers on this port. The USB
-	 * serial framework will have allocated a blank URB, buffer etc for
-	 * port0 when it put the endpoints there, but not for any of the other
-	 * ports on the device because there are no more endpoints. Thus we
-	 * have to allocate our own URBs for ports 1-7
-	 */
-	if (port->write_urb == NULL) {
-		dbg("port->write_urb == NULL, allocating one");
-		port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!port->write_urb) {
-			err("Allocating write URB failed");
-			return -ENOMEM;
-		}
-		/* buffer same size as port0 */
-		port->bulk_out_size = dev_extra->buffer_size;
-		port->bulk_out_buffer = kmalloc(port->bulk_out_size,
-						GFP_KERNEL);
-		if (!port->bulk_out_buffer) {
-			err("Couldn't allocate bulk_out_buffer");
-			return -ENOMEM;
-		}
-	}
-	if (serial->dev == NULL)
-		dbg("serial->dev == NULL");
-	dbg("port->bulk_out_size is %d", port->bulk_out_size);
-
-	usb_fill_bulk_urb(port->write_urb, serial->dev,
-			usb_sndbulkpipe(serial->dev,
-			port0->bulk_out_endpointAddress),
-			port->bulk_out_buffer,
-			port->bulk_out_size,
-			qt2_write_bulk_callback,
-			port);
-	port_extra->tx_pending_bytes = 0;
-
-	if (dev_extra->open_ports == 0) {
-		/* this is first port to be opened, so need the read URB
-		 * initialised for bulk in transfers (this is shared amongst
-		 * all the ports on the device) */
-		usb_fill_bulk_urb(port0->read_urb, serial->dev,
-			usb_rcvbulkpipe(serial->dev,
-			port0->bulk_in_endpointAddress),
-			port0->bulk_in_buffer,
-			port0->bulk_in_size,
-			qt2_read_bulk_callback, serial);
-		dbg("port0 bulk in URB initialised");
-
-		/* submit URB, i.e. start reading from device (async) */
-		dev_extra->ReadBulkStopped = false;
-		port_extra->read_urb_busy = true;
-		result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-		if (result) {
-			dev_err(&port->dev,
-				 "%s(): Error %d submitting bulk in urb",
-				__func__, result);
-			port_extra->read_urb_busy = false;
-			dev_extra->ReadBulkStopped = true;
-		}
-
-		/* When the first port is opened, initialise the value of
-		 * current_port in dev_extra to this port, so it is set
-		 * to something. Once the box sends data it will send the
-		 * relevant escape sequences to get it to the right port anyway
-		 */
-		dev_extra->current_port = port;
-	}
-
-	/* initialize our wait queues */
-	init_waitqueue_head(&port_extra->wait);
-	/* increment the count of openings of this port by one */
-	port_extra->open_count++;
-
-	/* remember to store dev_extra, port_extra and port0_extra back again at
-	 * end !*/
-	qt2_set_port_private(port, port_extra);
-	qt2_set_port_private(serial->port[0], port0_extra);
-	qt2_set_dev_private(serial, dev_extra);
-
-	dev_extra->open_ports++; /* one more port opened */
-
-	return 0;
-}
-
-/* called when a port is closed by userspace. It won't be called, however,
- * until calls to chars_in_buffer() reveal that the port has completed
- * sending buffered data, and there is nothing else to do. Thus we don't have
- * to rely on forcing data through in this function. */
-/* Setting close_pending should keep new data from being written out,
- * once all the data in the enpoint buffers is moved out we won't get
- * any more. */
-/* BoxStopReceive would keep any more data from coming from a given
- * port, but isn't called by the vendor driver, although their comments
- * mention it. Should it be used here to stop the inbound data
- * flow?
- */
-static void qt2_close(struct usb_serial_port *port)
-{
-	/* time out value for flush loops */
-	unsigned long jift;
-	struct quatech2_port *port_extra;	/* extra data for this port */
-	struct usb_serial *serial;	/* device structure */
-	struct quatech2_dev *dev_extra; /* extra data for the device */
-	__u8  lsr_value = 0;	/* value of Line Status Register */
-	int status;	/* result of last USB comms function */
-
-	dbg("%s(): port %d", __func__, port->number);
-	serial = port->serial;	/* get the parent device structure */
-	dev_extra = qt2_get_dev_private(serial);
-	/* get the device private data */
-	port_extra = qt2_get_port_private(port); /* port private data */
-
-	/* we can now (and only now) stop reading data */
-	port_extra->close_pending = true;
-	dbg("%s(): port_extra->close_pending = true", __func__);
-	/* although the USB side is now empty, the UART itself may
-	 * still be pushing characters out over the line, so we have to
-	 * wait testing the actual line status until the lines change
-	 * indicating that the data is done transferring. */
-	/* FIXME: slow this polling down so it doesn't run the USB bus flat out
-	 * if it actually has to spend any time in this loop (which it normally
-	 * doesn't because the buffer is nearly empty) */
-	jift = jiffies + (10 * HZ);	/* 10 sec timeout */
-	do {
-		status = qt2_box_get_register(serial, port->number,
-			QT2_LINE_STATUS_REGISTER, &lsr_value);
-		if (status < 0) {
-			dbg("%s(): qt2_box_get_register failed", __func__);
-			break;
-		}
-		if ((lsr_value & QT2_LSR_TEMT)) {
-			dbg("UART done sending");
-			break;
-		}
-		schedule();
-	} while (jiffies <= jift);
-
-	status = qt2_closeboxchannel(serial, port->number);
-	if (status < 0)
-		dbg("%s(): port %d qt2_box_open_close_channel failed",
-			__func__, port->number);
-	/* to avoid leaking URBs, we should now free the write_urb for this
-	 * port and set the pointer to null so that next time the port is opened
-	 * a new URB is allocated. This avoids leaking URBs when the device is
-	 * removed */
-	usb_free_urb(port->write_urb);
-	kfree(port->bulk_out_buffer);
-	port->bulk_out_buffer = NULL;
-	port->bulk_out_size = 0;
-
-	/* decrement the count of openings of this port by one */
-	port_extra->open_count--;
-	/* one less overall open as well */
-	dev_extra->open_ports--;
-	dbg("%s(): Exit, dev_extra->open_ports  = %d", __func__,
-		dev_extra->open_ports);
-}
-
-/**
- * qt2_write - write bytes from the tty layer out to the USB device.
- * @buf: The data to be written, size at least count.
- * @count: The number of bytes requested for transmission.
- * @return The number of bytes actually accepted for transmission to the device.
- */
-static int qt2_write(struct tty_struct *tty, struct usb_serial_port *port,
-		const unsigned char *buf, int count)
-{
-	struct usb_serial *serial;	/* parent device struct */
-	__u8 header_array[5];	/* header used to direct writes to the correct
-	port on the device */
-	struct quatech2_port *port_extra;	/* extra data for this port */
-	int result;
-
-	serial = port->serial; /* get the parent device of the port */
-	port_extra = qt2_get_port_private(port); /* port extra info */
-	if (serial == NULL)
-		return -ENODEV;
-	dbg("%s(): port %d, requested to write %d bytes, %d already pending",
-		__func__, port->number, count, port_extra->tx_pending_bytes);
-
-	if (count <= 0)	{
-		dbg("%s(): write request of <= 0 bytes", __func__);
-		return 0;	/* no bytes written */
-	}
-
-	/* check if the write urb is already in use, i.e. data already being
-	 * sent to this port */
-	if ((port->write_urb->status == -EINPROGRESS)) {
-		/* Fifo hasn't been emptied since last write to this port */
-		dbg("%s(): already writing, port->write_urb->status == "
-			"-EINPROGRESS", __func__);
-		/* schedule_work(&port->work); commented in vendor driver */
-		return 0;
-	} else if (port_extra->tx_pending_bytes >= QT2_FIFO_DEPTH) {
-		/* buffer is full (==). > should not occur, but would indicate
-		 * that an overflow had occurred */
-		dbg("%s(): port transmit buffer is full!", __func__);
-		/* schedule_work(&port->work); commented in vendor driver */
-		return 0;
-	}
-
-	/* We must fill the first 5 bytes of anything we sent with a transmit
-	 * header which directes the data to the correct port. The maximum
-	 * size we can send out in one URB is port->bulk_out_size, which caps
-	 * the number of bytes of real data we can send in each write. As the
-	 * semantics of write allow us to write less than we were give, we cap
-	 * the maximum we will ever write to the device as 5 bytes less than
-	 * one URB's worth, by reducing the value of the count argument
-	 * appropriately*/
-	if (count > port->bulk_out_size - QT2_TX_HEADER_LENGTH) {
-		count = port->bulk_out_size - QT2_TX_HEADER_LENGTH;
-		dbg("%s(): write request bigger than urb, only accepting "
-			"%d bytes", __func__, count);
-	}
-	/* we must also ensure that the FIFO at the other end can cope with the
-	 * URB we send it, otherwise it will have problems. As above, we can
-	 * restrict the write size by just shrinking count.*/
-	if (count > (QT2_FIFO_DEPTH - port_extra->tx_pending_bytes)) {
-		count = QT2_FIFO_DEPTH - port_extra->tx_pending_bytes;
-		dbg("%s(): not enough room in buffer, only accepting %d bytes",
-			__func__, count);
-	}
-	/* now build the header for transmission */
-	header_array[0] = 0x1b;
-	header_array[1] = 0x1b;
-	header_array[2] = (__u8)port->number;
-	header_array[3] = (__u8)count;
-	header_array[4] = (__u8)count >> 8;
-	/* copy header into URB */
-	memcpy(port->write_urb->transfer_buffer, header_array,
-		QT2_TX_HEADER_LENGTH);
-	/* and actual data to write */
-	memcpy(port->write_urb->transfer_buffer + 5, buf, count);
-
-	dbg("%s(): first data byte to send = %#.2x", __func__, *buf);
-
-	/* set up our urb */
-	usb_fill_bulk_urb(port->write_urb, serial->dev,
-			usb_sndbulkpipe(serial->dev,
-			port->bulk_out_endpointAddress),
-			port->write_urb->transfer_buffer, count + 5,
-			(qt2_write_bulk_callback), port);
-	/* send the data out the bulk port */
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	if (result) {
-		/* error couldn't submit urb */
-		result = 0;	/* return 0 as nothing got written */
-		dbg("%s(): failed submitting write urb, error %d",
-			__func__, result);
-	} else {
-		port_extra->tx_pending_bytes += count;
-		result = count;	/* return number of bytes written, i.e. count */
-		dbg("%s(): submitted write urb, wrote %d bytes, "
-			"total pending bytes %d",
-			__func__, result, port_extra->tx_pending_bytes);
-	}
-	return result;
-}
-
-/* This is used by the next layer up to know how much space is available
- * in the buffer on the device. It is used on a device closure to avoid
- * calling close() until the buffer is reported to be empty.
- * The returned value must never go down by more than the number of bytes
- * written for correct behaviour further up the driver stack, i.e. if I call
- * it, then write 6 bytes, then call again I should get 6 less, or possibly
- * only 5 less if one was written in the meantime, etc. I should never get 7
- * less (or any bigger number) because I only wrote 6 bytes.
- */
-static int qt2_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-		/* parent usb_serial_port pointer */
-	struct quatech2_port *port_extra;	/* extra data for this port */
-	int room = 0;
-	port_extra = qt2_get_port_private(port);
-
-	if (port_extra->close_pending == true) {
-		dbg("%s(): port_extra->close_pending == true", __func__);
-		return -ENODEV;
-	}
-	/* Q: how many bytes would a write() call actually succeed in writing
-	 * if it happened now?
-	 * A: one QT2_FIFO_DEPTH, less the number of bytes waiting to be sent
-	 * out of the port, unless this is more than the size of the
-	 * write_urb output buffer less the header, which is the maximum
-	 * size write we can do.
-
-	 * Most of the implementation of this is done when writes to the device
-	 * are started or terminate. When we send a write to the device, we
-	 * reduce the free space count by the size of the dispatched write.
-	 * When a "transmit empty" message comes back up the USB read stream,
-	 * we decrement the count by the number of bytes reported sent, thus
-	 * keeping track of the difference between sent and received bytes.
-	 */
-
-	room = (QT2_FIFO_DEPTH - port_extra->tx_pending_bytes);
-	/* space in FIFO */
-	if (room > port->bulk_out_size - QT2_TX_HEADER_LENGTH)
-		room = port->bulk_out_size - QT2_TX_HEADER_LENGTH;
-	/* if more than the URB can hold, then cap to that limit */
-
-	dbg("%s(): port %d: write room is %d", __func__, port->number, room);
-	return room;
-}
-
-static int qt2_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	/* parent usb_serial_port pointer */
-	struct quatech2_port *port_extra;	/* extra data for this port */
-	port_extra = qt2_get_port_private(port);
-
-	dbg("%s(): port %d: chars_in_buffer = %d", __func__,
-		port->number, port_extra->tx_pending_bytes);
-	return port_extra->tx_pending_bytes;
-}
-
-/* called when userspace does an ioctl() on the device. Note that
- * TIOCMGET and TIOCMSET are filtered off to their own methods before they get
- * here, so we don't have to handle them.
- */
-static int qt2_ioctl(struct tty_struct *tty,
-		     unsigned int cmd, unsigned long arg)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
-	__u8 mcr_value;	/* Modem Control Register value */
-	__u8 msr_value; /* Modem Status Register value */
-	unsigned short prev_msr_value; /* Previous value of Modem Status
-	 * Register used to implement waiting for a line status change to
-	 * occur */
-	struct quatech2_port *port_extra;	/* extra data for this port */
-	DECLARE_WAITQUEUE(wait, current);
-	/* Declare a wait queue named "wait" */
-
-	unsigned int value;
-	unsigned int UartNumber;
-
-	if (serial == NULL)
-		return -ENODEV;
-	UartNumber = tty->index - serial->minor;
-	port_extra = qt2_get_port_private(port);
-
-	dbg("%s(): port %d, UartNumber %d, tty =0x%p", __func__,
-	    port->number, UartNumber, tty);
-
-	if (cmd == TIOCMBIS || cmd == TIOCMBIC) {
-		if (qt2_box_get_register(port->serial, UartNumber,
-			QT2_MODEM_CONTROL_REGISTER, &mcr_value) < 0)
-			return -ESPIPE;
-		if (copy_from_user(&value, (unsigned int *)arg,
-			sizeof(value)))
-			return -EFAULT;
-
-		switch (cmd) {
-		case TIOCMBIS:
-			if (value & TIOCM_RTS)
-				mcr_value |= QT2_SERIAL_MCR_RTS;
-			if (value & TIOCM_DTR)
-				mcr_value |= QT2_SERIAL_MCR_DTR;
-			if (value & TIOCM_LOOP)
-				mcr_value |= QT2_SERIAL_MCR_LOOP;
-		break;
-		case TIOCMBIC:
-			if (value & TIOCM_RTS)
-				mcr_value &= ~QT2_SERIAL_MCR_RTS;
-			if (value & TIOCM_DTR)
-				mcr_value &= ~QT2_SERIAL_MCR_DTR;
-			if (value & TIOCM_LOOP)
-				mcr_value &= ~QT2_SERIAL_MCR_LOOP;
-		break;
-		default:
-		break;
-		}	/* end of local switch on cmd */
-		if (qt2_box_set_register(port->serial,  UartNumber,
-		    QT2_MODEM_CONTROL_REGISTER, mcr_value) < 0) {
-			return -ESPIPE;
-		} else {
-			port_extra->shadowMCR = mcr_value;
-			return 0;
-		}
-	} else if (cmd == TIOCMIWAIT) {
-		dbg("%s() port %d, cmd == TIOCMIWAIT enter",
-			__func__, port->number);
-		prev_msr_value = port_extra->shadowMSR  & QT2_SERIAL_MSR_MASK;
-		barrier();
-		__set_current_state(TASK_INTERRUPTIBLE);
-		while (1) {
-			add_wait_queue(&port_extra->wait, &wait);
-			schedule();
-			dbg("%s(): port %d, cmd == TIOCMIWAIT here\n",
-				__func__, port->number);
-			remove_wait_queue(&port_extra->wait, &wait);
-			/* see if a signal woke us up */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-			set_current_state(TASK_INTERRUPTIBLE);
-			msr_value = port_extra->shadowMSR & QT2_SERIAL_MSR_MASK;
-			if (msr_value == prev_msr_value) {
-				__set_current_state(TASK_RUNNING);
-				return -EIO;  /* no change - error */
-			}
-			if ((arg & TIOCM_RNG &&
-				((prev_msr_value & QT2_SERIAL_MSR_RI) ==
-					(msr_value & QT2_SERIAL_MSR_RI))) ||
-				(arg & TIOCM_DSR &&
-				((prev_msr_value & QT2_SERIAL_MSR_DSR) ==
-					(msr_value & QT2_SERIAL_MSR_DSR))) ||
-				(arg & TIOCM_CD &&
-				((prev_msr_value & QT2_SERIAL_MSR_CD) ==
-					(msr_value & QT2_SERIAL_MSR_CD))) ||
-				(arg & TIOCM_CTS &&
-				((prev_msr_value & QT2_SERIAL_MSR_CTS) ==
-					(msr_value & QT2_SERIAL_MSR_CTS)))) {
-				__set_current_state(TASK_RUNNING);
-				return 0;
-			}
-		} /* end inifinite while */
-		/* FIXME: This while loop needs a way to break out if the device
-		 * is disconnected while a process is waiting for the MSR to
-		 * change, because once it's disconnected, it isn't going to
-		 * change state ... */
-	} else {
-		/* any other ioctls we don't know about come here */
-		dbg("%s(): No ioctl for that one. port = %d", __func__,
-			port->number);
-		return -ENOIOCTLCMD;
-	}
-}
-
-/* Called when the user wishes to change the port settings using the termios
- * userspace interface */
-static void qt2_set_termios(struct tty_struct *tty,
-	struct usb_serial_port *port, struct ktermios *old_termios)
-{
-	struct usb_serial *serial; /* parent serial device */
-	int baud, divisor, remainder;
-	unsigned char LCR_change_to = 0;
-	int status;
-	__u16 UartNumber;
-
-	dbg("%s(): port %d", __func__, port->number);
-
-	serial = port->serial;
-
-	UartNumber = port->number;
-
-	if (old_termios && !tty_termios_hw_change(old_termios, tty->termios))
-		return;
-
-	switch (tty->termios->c_cflag) {
-	case CS5:
-		LCR_change_to |= QT2_SERIAL_5_DATA;
-		break;
-	case CS6:
-		LCR_change_to |= QT2_SERIAL_6_DATA;
-		break;
-	case CS7:
-		LCR_change_to |= QT2_SERIAL_7_DATA;
-		break;
-	default:
-	case CS8:
-		LCR_change_to |= QT2_SERIAL_8_DATA;
-		break;
-	}
-
-	/* Parity stuff */
-	if (tty->termios->c_cflag & PARENB) {
-		if (tty->termios->c_cflag & PARODD)
-			LCR_change_to |= QT2_SERIAL_ODD_PARITY;
-		else
-			LCR_change_to |= QT2_SERIAL_EVEN_PARITY;
-	}
-	/* Because LCR_change_to is initialised to zero, we don't have to worry
-	 * about the case where PARENB is not set or clearing bits, because by
-	 * default all of them are cleared, turning parity off.
-	 * as we don't support mark/space parity, we should clear the
-	 * mark/space parity bit in c_cflag, so the caller can tell we have
-	 * ignored the request */
-	tty->termios->c_cflag &= ~CMSPAR;
-
-	if (tty->termios->c_cflag & CSTOPB)
-		LCR_change_to |= QT2_SERIAL_TWO_STOPB;
-	else
-		LCR_change_to |= QT2_SERIAL_ONE_STOPB;
-
-	/* Thats the LCR stuff, next we need to work out the divisor as the
-	 * LCR and the divisor are set together */
-	baud = tty_get_baud_rate(tty);
-	if (!baud) {
-		/* pick a default, any default... */
-		baud = 9600;
-	}
-	dbg("%s(): got baud = %d", __func__, baud);
-
-	divisor = QT2_MAX_BAUD_RATE / baud;
-	remainder = QT2_MAX_BAUD_RATE % baud;
-	/* Round to nearest divisor */
-	if (((remainder * 2) >= baud) && (baud != 110))
-		divisor++;
-	dbg("%s(): setting divisor = %d, QT2_MAX_BAUD_RATE = %d , LCR = %#.2x",
-	      __func__, divisor, QT2_MAX_BAUD_RATE, LCR_change_to);
-
-	status = qt2_boxsetuart(serial, UartNumber, (unsigned short) divisor,
-			    LCR_change_to);
-	if (status < 0)	{
-		dbg("qt2_boxsetuart() failed");
-		return;
-	} else {
-		/* now encode the baud rate we actually set, which may be
-		 * different to the request */
-		baud = QT2_MAX_BAUD_RATE / divisor;
-		tty_encode_baud_rate(tty, baud, baud);
-	}
-
-	/* Now determine flow control */
-	if (tty->termios->c_cflag & CRTSCTS) {
-		dbg("%s(): Enabling HW flow control port %d", __func__,
-		      port->number);
-		/* Enable  RTS/CTS flow control */
-		status = qt2_boxsethw_flowctl(serial, UartNumber, true);
-		if (status < 0) {
-			dbg("qt2_boxsethw_flowctl() failed");
-			return;
-		}
-	} else {
-		/* Disable RTS/CTS flow control */
-		dbg("%s(): disabling HW flow control port %d", __func__,
-			port->number);
-		status = qt2_boxsethw_flowctl(serial, UartNumber, false);
-		if (status < 0)	{
-			dbg("qt2_boxsethw_flowctl failed");
-			return;
-		}
-	}
-	/* if we are implementing XON/XOFF, set the start and stop character
-	 * in the device */
-	if (I_IXOFF(tty) || I_IXON(tty)) {
-		unsigned char stop_char  = STOP_CHAR(tty);
-		unsigned char start_char = START_CHAR(tty);
-		status = qt2_boxsetsw_flowctl(serial, UartNumber, stop_char,
-				start_char);
-		if (status < 0)
-			dbg("qt2_boxsetsw_flowctl (enabled) failed");
-	} else {
-		/* disable SW flow control */
-		status = qt2_boxunsetsw_flowctl(serial, UartNumber);
-		if (status < 0)
-			dbg("qt2_boxunsetsw_flowctl (disabling) failed");
-	}
-}
-
-static int qt2_tiocmget(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
-
-	__u8 mcr_value;	/* Modem Control Register value */
-	__u8 msr_value;	/* Modem Status Register value */
-	unsigned int result = 0;
-	int status;
-	unsigned int UartNumber;
-
-	if (serial == NULL)
-		return -ENODEV;
-
-	dbg("%s(): port %d, tty =0x%p", __func__, port->number, tty);
-	UartNumber = tty->index - serial->minor;
-	dbg("UartNumber is %d", UartNumber);
-
-	status = qt2_box_get_register(port->serial, UartNumber,
-			QT2_MODEM_CONTROL_REGISTER,	&mcr_value);
-	if (status >= 0) {
-		status = qt2_box_get_register(port->serial,  UartNumber,
-				QT2_MODEM_STATUS_REGISTER, &msr_value);
-	}
-	if (status >= 0) {
-		result = ((mcr_value & QT2_SERIAL_MCR_DTR) ? TIOCM_DTR : 0)
-				/*DTR set */
-			| ((mcr_value & QT2_SERIAL_MCR_RTS)  ? TIOCM_RTS : 0)
-				/*RTS set */
-			| ((msr_value & QT2_SERIAL_MSR_CTS)  ? TIOCM_CTS : 0)
-				/* CTS set */
-			| ((msr_value & QT2_SERIAL_MSR_CD)  ? TIOCM_CAR : 0)
-				/*Carrier detect set */
-			| ((msr_value & QT2_SERIAL_MSR_RI)  ? TIOCM_RI : 0)
-				/* Ring indicator set */
-			| ((msr_value & QT2_SERIAL_MSR_DSR)  ? TIOCM_DSR : 0);
-				/* DSR set */
-		return result;
-	} else {
-		return -ESPIPE;
-	}
-}
-
-static int qt2_tiocmset(struct tty_struct *tty,
-		       unsigned int set, unsigned int clear)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
-	__u8 mcr_value;	/* Modem Control Register value */
-	int status;
-	unsigned int UartNumber;
-
-	if (serial == NULL)
-		return -ENODEV;
-
-	UartNumber = tty->index - serial->minor;
-	dbg("%s(): port %d, UartNumber %d", __func__, port->number, UartNumber);
-
-	status = qt2_box_get_register(port->serial, UartNumber,
-			QT2_MODEM_CONTROL_REGISTER, &mcr_value);
-	if (status < 0)
-		return -ESPIPE;
-
-	/* Turn off RTS, DTR and loopback, then only turn on what was asked
-	 * for */
-	mcr_value &= ~(QT2_SERIAL_MCR_RTS | QT2_SERIAL_MCR_DTR |
-			QT2_SERIAL_MCR_LOOP);
-	if (set & TIOCM_RTS)
-		mcr_value |= QT2_SERIAL_MCR_RTS;
-	if (set & TIOCM_DTR)
-		mcr_value |= QT2_SERIAL_MCR_DTR;
-	if (set & TIOCM_LOOP)
-		mcr_value |= QT2_SERIAL_MCR_LOOP;
-
-	status = qt2_box_set_register(port->serial, UartNumber,
-			QT2_MODEM_CONTROL_REGISTER, mcr_value);
-	if (status < 0)
-		return -ESPIPE;
-	else
-		return 0;
-}
-
-/** qt2_break - Turn BREAK on and off on the UARTs
- */
-static void qt2_break(struct tty_struct *tty, int break_state)
-{
-	struct usb_serial_port *port = tty->driver_data; /* parent port */
-	struct usb_serial *serial = port->serial;	/* parent device */
-	struct quatech2_port *port_extra;	/* extra data for this port */
-	__u16 break_value;
-	unsigned int result;
-
-	port_extra = qt2_get_port_private(port);
-	if (!serial) {
-		dbg("%s(): port %d: no serial object", __func__, port->number);
-		return;
-	}
-
-	if (break_state == -1)
-		break_value = 1;
-	else
-		break_value = 0;
-	dbg("%s(): port %d, break_value %d", __func__, port->number,
-		break_value);
-
-	mutex_lock(&port_extra->modelock);
-	if (!port_extra->open_count) {
-		dbg("%s(): port not open", __func__);
-		goto exit;
-	}
-
-	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-				QT2_BREAK_CONTROL, 0x40, break_value,
-				port->number, NULL, 0, 300);
-exit:
-	mutex_unlock(&port_extra->modelock);
-	dbg("%s(): exit port %d", __func__, port->number);
-
-}
-/**
- * qt2_throttle: - stop reading new data from the port
- */
-static void qt2_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
-	struct quatech2_port *port_extra;	/* extra data for this port */
-	dbg("%s(): port %d", __func__, port->number);
-
-	port_extra = qt2_get_port_private(port);
-	if (!serial) {
-		dbg("%s(): enter port %d no serial object", __func__,
-		      port->number);
-		return;
-	}
-
-	mutex_lock(&port_extra->modelock);	/* lock structure */
-	if (!port_extra->open_count) {
-		dbg("%s(): port not open", __func__);
-		goto exit;
-	}
-	/* Send command to box to stop receiving stuff. This will stop this
-	 * particular UART from filling the endpoint - in the multiport case the
-	 * FPGA UART will handle any flow control implemented, but for the single
-	 * port it's handed differently and we just quit submitting urbs
-	 */
-	if (serial->dev->descriptor.idProduct != QUATECH_SSU2_100)
-		qt2_boxstoprx(serial, port->number, 1);
-
-	port->throttled = 1;
-exit:
-	mutex_unlock(&port_extra->modelock);
-	dbg("%s(): port %d: setting port->throttled", __func__, port->number);
-	return;
-}
-
-/**
- * qt2_unthrottle: - start receiving data through the port again after being
- * throttled
- */
-static void qt2_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
-	struct quatech2_port *port_extra;	/* extra data for this port */
-	struct usb_serial_port *port0;	/* first port structure on device */
-	struct quatech2_dev *dev_extra;		/* extra data for the device */
-
-	if (!serial) {
-		dbg("%s() enter port %d no serial object!", __func__,
-			port->number);
-		return;
-	}
-	dbg("%s(): enter port %d", __func__, port->number);
-	dev_extra = qt2_get_dev_private(serial);
-	port_extra = qt2_get_port_private(port);
-	port0 = serial->port[0]; /* get the first port's device structure */
-
-	mutex_lock(&port_extra->modelock);
-	if (!port_extra->open_count) {
-		dbg("%s(): port %d not open", __func__, port->number);
-		goto exit;
-	}
-
-	if (port->throttled != 0) {
-		dbg("%s(): port %d: unsetting port->throttled", __func__,
-		    port->number);
-		port->throttled = 0;
-		/* Send command to box to start receiving stuff */
-		if (serial->dev->descriptor.idProduct != QUATECH_SSU2_100) {
-			qt2_boxstoprx(serial,  port->number, 0);
-		} else if (dev_extra->ReadBulkStopped == true) {
-			usb_fill_bulk_urb(port0->read_urb, serial->dev,
-				usb_rcvbulkpipe(serial->dev,
-				port0->bulk_in_endpointAddress),
-				port0->bulk_in_buffer,
-				port0->bulk_in_size,
-				qt2_read_bulk_callback,
-				serial);
-		}
-	}
-exit:
-	mutex_unlock(&port_extra->modelock);
-	dbg("%s(): exit port %d", __func__, port->number);
-	return;
-}
-
-/* internal, private helper functions for the driver */
-
-/* Power up the FPGA in the box to get it working */
-static int qt2_boxpoweron(struct usb_serial *serial)
-{
-	int result;
-	__u8  Direcion;
-	unsigned int pipe;
-	Direcion = USBD_TRANSFER_DIRECTION_OUT;
-	pipe = usb_rcvctrlpipe(serial->dev, 0);
-	result = usb_control_msg(serial->dev, pipe, QT_SET_GET_DEVICE,
-				Direcion, QU2BOXPWRON, 0x00, NULL, 0x00,
-				5000);
-	return result;
-}
-
-/*
- * qt2_boxsetQMCR Issue a QT2_GET_SET_QMCR vendor-spcific request on the
- * default control pipe. If successful return the number of bytes written,
- * otherwise return a negative error number of the problem.
- */
-static int qt2_boxsetQMCR(struct usb_serial *serial, __u16 Uart_Number,
-			  __u8 QMCR_Value)
-{
-	int result;
-	__u16 PortSettings;
-
-	PortSettings = (__u16)(QMCR_Value);
-
-	dbg("%s(): Port = %d, PortSettings = 0x%x", __func__,
-			Uart_Number, PortSettings);
-
-	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-				QT2_GET_SET_QMCR, 0x40, PortSettings,
-				(__u16)Uart_Number, NULL, 0, 5000);
-	return result;
-}
-
-static int port_paranoia_check(struct usb_serial_port *port,
-			       const char *function)
-{
-	if (!port) {
-		dbg("%s - port == NULL", function);
-		return -1;
-	}
-	if (!port->serial) {
-		dbg("%s - port->serial == NULL\n", function);
-		return -1;
-	}
-	return 0;
-}
-
-static int serial_paranoia_check(struct usb_serial *serial,
-				 const char *function)
-{
-	if (!serial) {
-		dbg("%s - serial == NULL\n", function);
-		return -1;
-	}
-
-	if (!serial->type) {
-		dbg("%s - serial->type == NULL!", function);
-		return -1;
-	}
-
-	return 0;
-}
-
-static inline struct quatech2_port *qt2_get_port_private(struct usb_serial_port
-		*port)
-{
-	return (struct quatech2_port *)usb_get_serial_port_data(port);
-}
-
-static inline void qt2_set_port_private(struct usb_serial_port *port,
-		struct quatech2_port *data)
-{
-	usb_set_serial_port_data(port, (void *)data);
-}
-
-static inline struct quatech2_dev *qt2_get_dev_private(struct usb_serial
-		*serial)
-{
-	return (struct quatech2_dev *)usb_get_serial_data(serial);
-}
-static inline void qt2_set_dev_private(struct usb_serial *serial,
-		struct quatech2_dev *data)
-{
-	usb_set_serial_data(serial, (void *)data);
-}
-
-static int qt2_openboxchannel(struct usb_serial *serial, __u16
-		Uart_Number, struct qt2_status_data *status)
-{
-	int result;
-	__u16 length;
-	__u8  Direcion;
-	unsigned int pipe;
-	length = sizeof(struct qt2_status_data);
-	Direcion = USBD_TRANSFER_DIRECTION_IN;
-	pipe = usb_rcvctrlpipe(serial->dev, 0);
-	result = usb_control_msg(serial->dev, pipe, QT_OPEN_CLOSE_CHANNEL,
-			Direcion, 0x00, Uart_Number, status, length, 5000);
-	return result;
-}
-static int qt2_closeboxchannel(struct usb_serial *serial, __u16 Uart_Number)
-{
-	int result;
-	__u8  direcion;
-	unsigned int pipe;
-	direcion = USBD_TRANSFER_DIRECTION_OUT;
-	pipe = usb_sndctrlpipe(serial->dev, 0);
-	result = usb_control_msg(serial->dev, pipe, QT_OPEN_CLOSE_CHANNEL,
-		  direcion, 0, Uart_Number, NULL, 0, 5000);
-	return result;
-}
-
-/* qt2_conf_uart Issue a SET_UART vendor-spcific request on the default
- * control pipe. If successful sets baud rate divisor and LCR value
- */
-static int qt2_conf_uart(struct usb_serial *serial,  unsigned short Uart_Number,
-		      unsigned short divisor, unsigned char LCR)
-{
-	int result;
-	unsigned short UartNumandLCR;
-
-	UartNumandLCR = (LCR << 8) + Uart_Number;
-
-	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-				QT2_GET_SET_UART, 0x40, divisor, UartNumandLCR,
-				NULL, 0, 300);
-	return result;
-}
-
-/** @brief Callback for asynchronous submission of read URBs on bulk in
- * endpoints
- *
- * Registered in qt2_open_port(), used to deal with incomming data
- * from the box.
- */
-static void qt2_read_bulk_callback(struct urb *urb)
-{
-	/* Get the device pointer (struct usb_serial) back out of the URB */
-	struct usb_serial *serial = urb->context;
-	/* get the extra struct for the device */
-	struct quatech2_dev *dev_extra = qt2_get_dev_private(serial);
-	/* Get first port structure from the device */
-	struct usb_serial_port *port0 = serial->port[0];
-	/* Get the currently active port structure from serial struct */
-	struct usb_serial_port *active = dev_extra->current_port;
-	/* get the extra struct for port 0 */
-	struct quatech2_port *port0_extra = qt2_get_port_private(port0);
-	/* and for the currently active port */
-	struct quatech2_port *active_extra = qt2_get_port_private(active);
-	/* When we finally get to doing some tty stuff, we will need this */
-	struct tty_struct *tty_st;
-	unsigned int RxCount;	/* the length of the data to process */
-	unsigned int i;	/* loop counter over the data to process */
-	int result;	/* return value cache variable */
-	bool escapeflag;	/* flag set to true if this loop iteration is
-				 * parsing an escape sequence, rather than
-				 * ordinary data */
-	dbg("%s(): callback running, active port is %d", __func__,
-		active->number);
-
-	if (urb->status) {
-		/* read didn't go well */
-		dev_extra->ReadBulkStopped = true;
-		dbg("%s(): nonzero bulk read status received: %d",
-			__func__, urb->status);
-		return;
-	}
-
-	/* inline port_sofrint() here */
-	if (port_paranoia_check(port0, __func__) != 0) {
-		dbg("%s - port_paranoia_check on port0 failed, exiting\n",
-__func__);
-		return;
-	}
-	if (port_paranoia_check(active, __func__) != 0) {
-		dbg("%s - port_paranoia_check on current_port "
-			"failed, exiting", __func__);
-		return;
-	}
-
-/* This single callback function has to do for all the ports on
- * the device. Data being read up the USB can contain certain
- * escape sequences which are used to communicate out-of-band
- * information from the serial port in-band over the USB.
- * These escapes include sending modem and flow control line
- * status, and switching the port. The concept of a "Current Port"
- * is used, which is where data is going until a port change
- * escape seqence is received. This Current Port is kept between
- * callbacks so that when this function enters we know which the
- * currently active port is and can get to work right away without
- * the box having to send repeat escape sequences (anyway, how
- * would it know to do so?).
- */
-
-	if (active_extra->close_pending == true) {
-		/* We are closing , stop reading */
-		dbg("%s - (active->close_pending == true", __func__);
-		if (dev_extra->open_ports <= 0) {
-			/* If this is the only port left open - stop the
-			 * bulk read */
-			dev_extra->ReadBulkStopped = true;
-			dbg("%s - (ReadBulkStopped == true;", __func__);
-			return;
-		}
-	}
-
-	/*
-	 * RxHolding is asserted by throttle, if we assert it, we're not
-	 * receiving any more characters and let the box handle the flow
-	 * control
-	 */
-	if ((port0_extra->RxHolding == true) &&
-		    (serial->dev->descriptor.idProduct == QUATECH_SSU2_100)) {
-		/* single port device, input is already stopped, so we don't
-		 * need any more input data */
-		dev_extra->ReadBulkStopped = true;
-		return;
-	}
-	/* finally, we are in a situation where we might consider the data
-	 * that is contained within the URB, and what to do about it.
-	 * This is likely to involved communicating up to the TTY layer, so
-	 * we will need to get hold of the tty for the port we are currently
-	 * dealing with */
-
-	/* active is a usb_serial_port. It has a member port which is a
-	 * tty_port. From this we get a tty_struct pointer which is what we
-	 * actually wanted, and keep it on tty_st */
-	tty_st = tty_port_tty_get(&active->port);
-	if (!tty_st) {
-		dbg("%s - bad tty pointer - exiting", __func__);
-		return;
-	}
-	RxCount = urb->actual_length;	/* grab length of data handy */
-
-	if (RxCount) {
-		/* skip all this if no data to process */
-		for (i = 0; i < RxCount ; ++i) {
-			/* Look ahead code here -works on several bytes at onc*/
-			if ((i <= (RxCount - 3)) && (THISCHAR == 0x1b)
-				&& (NEXTCHAR == 0x1b)) {
-				/* we are in an escape sequence, type
-				 * determined by the 3rd char */
-				escapeflag = false;
-				switch (THIRDCHAR) {
-				case 0x00:
-					/* Line status change 4th byte must
-					 * follow */
-					if (i > (RxCount - 4)) {
-						dbg("Illegal escape sequences "
-						"in received data");
-						break;
-					}
-					qt2_process_line_status(active,
-						FOURTHCHAR);
-					i += 3;
-					escapeflag = true;
-					break;
-				case 0x01:
-					/* Modem status status change 4th byte
-					 * must follow */
-					if (i > (RxCount - 4)) {
-						dbg("Illegal escape sequences "
-						"in received data");
-						break;
-					}
-					qt2_process_modem_status(active,
-						FOURTHCHAR);
-					i += 3;
-					escapeflag = true;
-					break;
-				case 0x02:
-					/* xmit hold empty 4th byte
-					 * must follow */
-					if (i > (RxCount - 4)) {
-						dbg("Illegal escape sequences "
-						"in received data");
-						break;
-					}
-					qt2_process_xmit_empty(active,
-						FOURTHCHAR, FIFTHCHAR);
-					i += 4;
-					escapeflag = true;
-					break;
-				case 0x03:
-					/* Port number change 4th byte
-					 * must follow */
-					if (i > (RxCount - 4)) {
-						dbg("Illegal escape sequences "
-						"in received data");
-						break;
-					}
-					/* Port change. If port open push
-					 * current data up to tty layer */
-					if (active_extra->open_count > 0)
-						tty_flip_buffer_push(tty_st);
-
-					dbg("Port Change: new port = %d",
-						FOURTHCHAR);
-					qt2_process_port_change(active,
-						FOURTHCHAR);
-					i += 3;
-					escapeflag = true;
-					/* having changed port, the pointers for
-					 * the currently active port are all out
-					 * of date and need updating */
-					active = dev_extra->current_port;
-					active_extra =
-						qt2_get_port_private(active);
-					tty_st = tty_port_tty_get(
-						&active->port);
-					break;
-				case 0x04:
-					/* Recv flush 3rd byte must
-					 * follow */
-					if (i > (RxCount - 3)) {
-						dbg("Illegal escape sequences "
-							"in received data");
-						break;
-					}
-					qt2_process_rcv_flush(active);
-					i += 2;
-					escapeflag = true;
-					break;
-				case 0x05:
-					/* xmit flush 3rd byte must follow */
-					if (i > (RxCount - 3)) {
-						dbg("Illegal escape sequences "
-						"in received data");
-						break;
-					}
-					qt2_process_xmit_flush(active);
-					i += 2;
-					escapeflag = true;
-					break;
-				case 0xff:
-					dbg("No status sequence");
-					qt2_process_rx_char(active, THISCHAR);
-					qt2_process_rx_char(active, NEXTCHAR);
-					i += 2;
-					break;
-				default:
-					qt2_process_rx_char(active, THISCHAR);
-					i += 1;
-					break;
-				} /*end switch*/
-				if (escapeflag == true)
-					continue;
-				/* if we did an escape char, we don't need
-				 * to mess around pushing data through the
-				 * tty layer, and can go round again */
-			} /*endif*/
-			if (tty_st && urb->actual_length) {
-				tty_buffer_request_room(tty_st, 1);
-				tty_insert_flip_string(tty_st, &(
-						(unsigned char *)
-						(urb->transfer_buffer)
-					)[i], 1);
-			}
-		} /*endfor*/
-		tty_flip_buffer_push(tty_st);
-	} /*endif*/
-
-	/* at this point we have complete dealing with the data for this
-	 * callback. All we have to do now is to start the async read process
-	 * back off again. */
-
-	usb_fill_bulk_urb(port0->read_urb, serial->dev,
-		usb_rcvbulkpipe(serial->dev, port0->bulk_in_endpointAddress),
-		port0->bulk_in_buffer, port0->bulk_in_size,
-		qt2_read_bulk_callback, serial);
-	result = usb_submit_urb(port0->read_urb, GFP_ATOMIC);
-	if (result) {
-		dbg("%s(): failed resubmitting read urb, error %d",
-			__func__, result);
-	} else {
-		dbg("%s() successfully resubmitted read urb", __func__);
-		if (tty_st && RxCount) {
-			/* if some inbound data was processed, then
-			 * we need to push that through the tty layer
-			 */
-			tty_flip_buffer_push(tty_st);
-			tty_schedule_flip(tty_st);
-		}
-	}
-
-	/* cribbed from serqt_usb2 driver, but not sure which work needs
-	 * scheduling - port0 or currently active port? */
-	/* schedule_work(&port->work); */
-	dbg("%s() completed", __func__);
-	return;
-}
-
-/** @brief Callback for asynchronous submission of write URBs on bulk in
- * endpoints
- *
- * Registered in qt2_write(), used to deal with outgoing data
- * to the box.
- */
-static void qt2_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
-	struct usb_serial *serial = port->serial;
-	dbg("%s(): port %d", __func__, port->number);
-	if (!serial) {
-		dbg("%s(): bad serial pointer, exiting", __func__);
-		return;
-	}
-	if (urb->status) {
-		dbg("%s(): nonzero write bulk status received: %d",
-			__func__, urb->status);
-		return;
-	}
-	/* FIXME What is supposed to be going on here?
-	 * does this actually do anything useful, and should it?
-	 */
-	/*port_softint((void *) serial); commented in vendor driver */
-	schedule_work(&port->work);
-	dbg("%s(): port %d exit", __func__, port->number);
-	return;
-}
-
-static void qt2_process_line_status(struct usb_serial_port *port,
-	unsigned char LineStatus)
-{
-	/* obtain the private structure for the port */
-	struct quatech2_port *port_extra = qt2_get_port_private(port);
-	port_extra->shadowLSR = LineStatus & (QT2_SERIAL_LSR_OE |
-		QT2_SERIAL_LSR_PE | QT2_SERIAL_LSR_FE | QT2_SERIAL_LSR_BI);
-}
-static void qt2_process_modem_status(struct usb_serial_port *port,
-	unsigned char ModemStatus)
-{
-	/* obtain the private structure for the port */
-	struct quatech2_port *port_extra = qt2_get_port_private(port);
-	port_extra->shadowMSR = ModemStatus;
-	wake_up_interruptible(&port_extra->wait);
-	/* this wakes up the otherwise indefinitely waiting code for
-	 * the TIOCMIWAIT ioctl, so that it can notice that
-	 * port_extra->shadowMSR has changed and the ioctl needs to return.
-	 */
-}
-
-static void qt2_process_xmit_empty(struct usb_serial_port *port,
-	unsigned char fourth_char, unsigned char fifth_char)
-{
-	int byte_count;
-	/* obtain the private structure for the port */
-	struct quatech2_port *port_extra = qt2_get_port_private(port);
-
-	byte_count = (int)(fifth_char * 16);
-	byte_count +=  (int)fourth_char;
-	/* byte_count indicates how many bytes the device has written out. This
-	 * message appears to occur regularly, and is used in the vendor driver
-	 * to keep track of the fill state of the port transmit buffer */
-	port_extra->tx_pending_bytes -= byte_count;
-	/* reduce the stored data queue length by the known number of bytes
-	 * sent */
-	dbg("port %d: %d bytes reported sent, %d still pending", port->number,
-			byte_count, port_extra->tx_pending_bytes);
-
-	/*port_extra->xmit_fifo_room_bytes = FIFO_DEPTH; ???*/
-}
-
-static void qt2_process_port_change(struct usb_serial_port *port,
-	unsigned char New_Current_Port)
-{
-	/* obtain the parent usb serial device structure */
-	struct usb_serial *serial = port->serial;
-	/* obtain the private structure for the device */
-	struct quatech2_dev *dev_extra = qt2_get_dev_private(serial);
-	dev_extra->current_port = serial->port[New_Current_Port];
-	/* what should I do with this? commented out in upstream
-	 * driver */
-	/*schedule_work(&port->work);*/
-}
-
-static void qt2_process_rcv_flush(struct usb_serial_port *port)
-{
-	/* obtain the private structure for the port */
-	struct quatech2_port *port_extra = qt2_get_port_private(port);
-	port_extra->rcv_flush = true;
-}
-static void qt2_process_xmit_flush(struct usb_serial_port *port)
-{
-	/* obtain the private structure for the port */
-	struct quatech2_port *port_extra = qt2_get_port_private(port);
-	port_extra->xmit_flush = true;
-}
-
-static void qt2_process_rx_char(struct usb_serial_port *port,
-	unsigned char data)
-{
-	/* get the tty_struct for this port */
-	struct tty_struct *tty = tty_port_tty_get(&(port->port));
-	/* get the URB with the data in to push */
-	struct urb *urb = port->serial->port[0]->read_urb;
-
-	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, 1);
-		tty_insert_flip_string(tty, &data, 1);
-		/* should this be commented out here? */
-		/*tty_flip_buffer_push(tty);*/
-	}
-}
-
-/** @brief Retrieve the value of a register from the device
- *
- * Issues a GET_REGISTER vendor-spcific request over the USB control
- * pipe to obtain a value back from a specific register on a specific
- * UART
- * @param serial Serial device handle to access the device through
- * @param uart_number Which UART the value is wanted from
- * @param register_num Which register to read the value from
- * @param pValue Pointer to somewhere to put the retrieved value
- */
-static int qt2_box_get_register(struct usb_serial *serial,
-		unsigned char uart_number, unsigned short register_num,
-		__u8 *pValue)
-{
-	int result;
-	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			QT2_GET_SET_REGISTER, 0xC0, register_num,
-			uart_number, (void *)pValue, sizeof(*pValue), 300);
-	return result;
-}
-
-/** qt2_box_set_register
- * Issue a SET_REGISTER vendor-specific request on the default control pipe
- */
-static int qt2_box_set_register(struct usb_serial *serial,
-		unsigned short Uart_Number, unsigned short Register_Num,
-		unsigned short Value)
-{
-	int result;
-	unsigned short reg_and_byte;
-
-	reg_and_byte = Value;
-	reg_and_byte = reg_and_byte << 8;
-	reg_and_byte = reg_and_byte + Register_Num;
-
-	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			QT2_GET_SET_REGISTER, 0x40, reg_and_byte,
-			Uart_Number, NULL, 0, 300);
-	return result;
-}
-
-/** qt2_boxsetuart - Issue a SET_UART vendor-spcific request on the default
- * control pipe. If successful sets baud rate divisor and LCR value.
- */
-static int qt2_boxsetuart(struct usb_serial *serial, unsigned short Uart_Number,
-		unsigned short default_divisor, unsigned char default_LCR)
-{
-	unsigned short UartNumandLCR;
-
-	UartNumandLCR = (default_LCR << 8) + Uart_Number;
-
-	return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			QT2_GET_SET_UART, 0x40, default_divisor, UartNumandLCR,
-			NULL, 0, 300);
-}
-
-/** qt2_boxsethw_flowctl - Turn hardware (RTS/CTS) flow control on and off for
- * a hardware UART.
- */
-static int qt2_boxsethw_flowctl(struct usb_serial *serial,
-		unsigned int UartNumber, bool bSet)
-{
-	__u8 MCR_Value = 0;
-	__u8 MSR_Value = 0;
-	__u16 MOUT_Value = 0;
-
-	if (bSet == true) {
-		MCR_Value =  QT2_SERIAL_MCR_RTS;
-		/* flow control, box will clear RTS line to prevent remote
-		 * device from transmitting more chars */
-	} else {
-		/* no flow control to remote device */
-		MCR_Value =  0;
-	}
-	MOUT_Value = MCR_Value << 8;
-
-	if (bSet == true) {
-		MSR_Value = QT2_SERIAL_MSR_CTS;
-		/* flow control on, box will inhibit tx data if CTS line is
-		 * asserted */
-	} else {
-		/* Box will not inhibit tx data due to CTS line */
-		MSR_Value = 0;
-	}
-	MOUT_Value |= MSR_Value;
-	return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			QT2_HW_FLOW_CONTROL_MASK, 0x40, MOUT_Value, UartNumber,
-			NULL, 0, 300);
-}
-
-/** qt2_boxsetsw_flowctl - Turn software (XON/XOFF) flow control on for
- * a hardware UART, and set the XON and XOFF characters.
- */
-static int qt2_boxsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber,
-			unsigned char stop_char,  unsigned char start_char)
-{
-	__u16 nSWflowout;
-
-	nSWflowout = start_char << 8;
-	nSWflowout = (unsigned short)stop_char;
-	return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			QT2_SW_FLOW_CONTROL_MASK, 0x40, nSWflowout, UartNumber,
-			NULL, 0, 300);
-}
-
-/** qt2_boxunsetsw_flowctl - Turn software (XON/XOFF) flow control off for
- * a hardware UART.
- */
-static int qt2_boxunsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber)
-{
-	return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			QT2_SW_FLOW_CONTROL_DISABLE, 0x40, 0, UartNumber, NULL,
-			0, 300);
-}
-
-/**
- * qt2_boxstoprx - Start and stop reception of data by the FPGA UART in
- * response to requests from the tty layer
- * @serial: pointer to the usb_serial structure for the parent device
- * @uart_number: which UART on the device we are addressing
- * @stop: Whether to start or stop data reception. Set to 1 to stop data being
- * received, and to 0 to start it being received.
- */
-static int qt2_boxstoprx(struct usb_serial *serial, unsigned short uart_number,
-		unsigned short stop)
-{
-	return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-		QT2_STOP_RECEIVE, 0x40, stop, uart_number, NULL, 0, 300);
-}
-
-
-/*
- * last things in file: stuff to register this driver into the generic
- * USB serial framework.
- */
-
-static struct usb_serial_driver quatech2_device = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = "quatech_usb2",
-	},
-	.description = DRIVER_DESC,
-	.id_table = quausb2_id_table,
-	.num_ports = 8,
-	.open = qt2_open,
-	.close = qt2_close,
-	.write = qt2_write,
-	.write_room = qt2_write_room,
-	.chars_in_buffer = qt2_chars_in_buffer,
-	.throttle = qt2_throttle,
-	.unthrottle = qt2_unthrottle,
-	.calc_num_ports = qt2_calc_num_ports,
-	.ioctl = qt2_ioctl,
-	.set_termios = qt2_set_termios,
-	.break_ctl = qt2_break,
-	.tiocmget = qt2_tiocmget,
-	.tiocmset = qt2_tiocmset,
-	.attach = qt2_attach,
-	.release = qt2_release,
-	.read_bulk_callback = qt2_read_bulk_callback,
-	.write_bulk_callback = qt2_write_bulk_callback,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
-	&quatech2_device, NULL
-};
-
-module_usb_serial_driver(quausb2_usb_driver, serial_drivers);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/staging/ramster/Kconfig b/drivers/staging/ramster/Kconfig
index 4af1f8d4b953..8349887827dc 100644
--- a/drivers/staging/ramster/Kconfig
+++ b/drivers/staging/ramster/Kconfig
@@ -1,6 +1,6 @@
 config RAMSTER
 	bool "Cross-machine RAM capacity sharing, aka peer-to-peer tmem"
-	depends on (CLEANCACHE || FRONTSWAP) && CONFIGFS_FS=y && !ZCACHE && !XVMALLOC && !HIGHMEM
+	depends on (CLEANCACHE || FRONTSWAP) && CONFIGFS_FS=y && !ZCACHE && !XVMALLOC && !HIGHMEM && NET
 	select LZO_COMPRESS
 	select LZO_DECOMPRESS
 	default n
diff --git a/drivers/staging/ramster/cluster/tcp.c b/drivers/staging/ramster/cluster/tcp.c
index b9721c1055b1..d0a07d722b61 100644
--- a/drivers/staging/ramster/cluster/tcp.c
+++ b/drivers/staging/ramster/cluster/tcp.c
@@ -111,7 +111,7 @@ static struct socket *r2net_listen_sock;
  * r2net_wq.  teardown detaches the callbacks before destroying the workqueue.
  * quorum work is queued as sock containers are shutdown.. stop_listening
  * tears down all the node's sock containers, preventing future shutdowns
- * and queued quroum work, before canceling delayed quorum work and
+ * and queued quorum work, before canceling delayed quorum work and
  * destroying the work queue.
  */
 static struct workqueue_struct *r2net_wq;
@@ -660,7 +660,7 @@ out:
 
 /*
  * we register callbacks so we can queue work on events before calling
- * the original callbacks.  our callbacks our careful to test user_data
+ * the original callbacks.  our callbacks are careful to test user_data
  * to discover when they've reaced with r2net_unregister_callbacks().
  */
 static void r2net_register_callbacks(struct sock *sk,
diff --git a/drivers/staging/ramster/xvmalloc.c b/drivers/staging/ramster/xvmalloc.c
index 93ba8e9407aa..44ceb0b823a9 100644
--- a/drivers/staging/ramster/xvmalloc.c
+++ b/drivers/staging/ramster/xvmalloc.c
@@ -132,7 +132,7 @@ static u32 find_block(struct xv_pool *pool, u32 size,
 	if (!pool->flbitmap)
 		return 0;
 
-	/* Get freelist index correspoding to this size */
+	/* Get freelist index corresponding to this size */
 	slindex = get_index(size);
 	slbitmap = pool->slbitmap[slindex / BITS_PER_LONG];
 	slbitstart = slindex % BITS_PER_LONG;
diff --git a/drivers/staging/ramster/zcache-main.c b/drivers/staging/ramster/zcache-main.c
index 68b2e053a0e6..4e7ef0e6b79c 100644
--- a/drivers/staging/ramster/zcache-main.c
+++ b/drivers/staging/ramster/zcache-main.c
@@ -1331,7 +1331,7 @@ static ssize_t zv_max_mean_zsize_store(struct kobject *kobj,
  * when that limit is reached, further puts will be rejected (until
  * some pages have been flushed).  Note that, due to compression,
  * this number may exceed 100; it defaults to 75 and we set an
- * arbitary limit of 150.  A poor choice will almost certainly result
+ * arbitrary limit of 150.  A poor choice will almost certainly result
  * in OOM's, so this value should only be changed prudently.
  */
 static ssize_t zv_page_count_policy_percent_show(struct kobject *kobj,
@@ -2004,7 +2004,7 @@ int zcache_pampd_replace_in_obj(void *new_pampd, struct tmem_obj *obj)
  * Called by the message handler after a (still compressed) page has been
  * fetched from the remote machine in response to an "is_remote" tmem_get
  * or persistent tmem_localify.  For a tmem_get, "extra" is the address of
- * the page that is to be filled to succesfully resolve the tmem_get; for
+ * the page that is to be filled to successfully resolve the tmem_get; for
  * a (persistent) tmem_localify, "extra" is NULL (as the data is placed only
  * in the local zcache).  "data" points to "size" bytes of (compressed) data
  * passed in the message.  In the case of a persistent remote get, if
@@ -2095,7 +2095,7 @@ out:
 /*
  * Called on a remote persistent tmem_get to attempt to preallocate
  * local storage for the data contained in the remote persistent page.
- * If succesfully preallocated, returns the pampd, marked as remote and
+ * If successfully preallocated, returns the pampd, marked as remote and
  * in_transit.  Else returns NULL.  Note that the appropriate tmem data
  * structure must be locked.
  */
diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile
index 72db504b23b4..91d1aa2830c9 100644
--- a/drivers/staging/rtl8187se/Makefile
+++ b/drivers/staging/rtl8187se/Makefile
@@ -10,7 +10,7 @@ ccflags-y += -DHIGH_POWER
 ccflags-y += -DSW_DIG
 ccflags-y += -DRATE_ADAPT
 
-#enable it for legacy power save, disable it for leisure  power save
+#enable it for legacy power save, disable it for leisure power save
 ccflags-y += -DENABLE_LPS
 
 
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c
index 309bb8bf287e..0e93eb0735a7 100644
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c
@@ -55,7 +55,7 @@ Dot11d_Reset(struct ieee80211_device *ieee)
 
 //
 //	Description:
-//		Update country IE from Beacon or Probe Resopnse
+//		Update country IE from Beacon or Probe Response
 //		and configure PHY for operation in the regulatory domain.
 //
 //	TODO:
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
index 40dd715d9df7..b94c48b29302 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
@@ -834,7 +834,7 @@ enum ieee80211_state {
 	/* the association procedure is sending AUTH request*/
 	IEEE80211_ASSOCIATING_AUTHENTICATING,
 
-	/* the association procedure has successfully authentcated
+	/* the association procedure has successfully authenticated
 	 * and is sending association request
 	 */
 	IEEE80211_ASSOCIATING_AUTHENTICATED,
@@ -934,7 +934,7 @@ struct ieee80211_device {
 			   * with RX of broad/multicast frames */
 
 	/* Fragmentation structures */
-	// each streaming contain a entry
+	/* each stream contains an entry */
 	struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
 	unsigned int frag_next_idx[17];
 	u16 fts; /* Fragmentation Threshold */
@@ -972,7 +972,7 @@ struct ieee80211_device {
 
 	int rate;       /* current rate */
 	int basic_rate;
-	//FIXME: pleace callback, see if redundant with softmac_features
+	//FIXME: please callback, see if redundant with softmac_features
 	short active_scan;
 
 	/* this contains flags for selectively enable softmac support */
@@ -1106,7 +1106,7 @@ struct ieee80211_device {
 
 	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
 	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
-	 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
+	 * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
 	 * then also management frames are sent via this callback.
 	 * This function can't sleep.
 	 */
@@ -1124,7 +1124,7 @@ struct ieee80211_device {
 
 	/* ask to the driver to retune the radio .
 	 * This function can sleep. the driver should ensure
-	 * the radio has been swithced before return.
+	 * the radio has been switched before return.
 	 */
 	void (*set_chan)(struct net_device *dev,short ch);
 
@@ -1135,7 +1135,7 @@ struct ieee80211_device {
 	 * The syncro version is similar to the start_scan but
 	 * does not return until all channels has been scanned.
 	 * this is called in user context and should sleep,
-	 * it is called in a work_queue when swithcing to ad-hoc mode
+	 * it is called in a work_queue when switching to ad-hoc mode
 	 * or in behalf of iwlist scan when the card is associated
 	 * and root user ask for a scan.
 	 * the function stop_scan should stop both the syncro and
@@ -1196,7 +1196,7 @@ struct ieee80211_device {
 /* Generate probe requests */
 #define IEEE_SOFTMAC_PROBERQ (1<<4)
 
-/* Generate respones to probe requests */
+/* Generate response to probe requests */
 #define IEEE_SOFTMAC_PROBERS (1<<5)
 
 /* The ieee802.11 stack will manages the netif queue
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
index 26bacb96d247..8173240dcf7a 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
@@ -42,7 +42,7 @@ short ieee80211_is_shortslot(const struct ieee80211_network *net)
 	return net->capability & WLAN_CAPABILITY_SHORT_SLOT;
 }
 
-/* returns the total length needed for pleacing the RATE MFIE
+/* returns the total length needed for placing the RATE MFIE
  * tag and the EXTENDED RATE MFIE tag if needed.
  * It encludes two bytes per tag for the tag itself and its len
  */
@@ -60,7 +60,7 @@ unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee)
 	return rate_len;
 }
 
-/* pleace the MFIE rate, tag to the memory (double) poined.
+/* place the MFIE rate, tag to the memory (double) poised.
  * Then it updates the pointer so that
  * it points after the new MFIE tag added.
  */
@@ -467,7 +467,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
 		 *    So we switch to IEEE80211_LINKED_SCANNING to remember
 		 *    that we are still logically linked (not interested in
 		 *    new network events, despite for updating the net list,
-		 *    but we are temporarly 'unlinked' as the driver shall
+		 *    but we are temporarily 'unlinked' as the driver shall
 		 *    not filter RX frames and the channel is changing.
 		 * So the only situation in witch are interested is to check
 		 * if the state become LINKED because of the #1 situation
@@ -530,7 +530,7 @@ void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee)
                  *    So we switch to IEEE80211_LINKED_SCANNING to remember
                  *    that we are still logically linked (not interested in
                  *    new network events, despite for updating the net list,
-                 *    but we are temporarly 'unlinked' as the driver shall
+                 *    but we are temporarily 'unlinked' as the driver shall
                  *    not filter RX frames and the channel is changing.
                  * So the only situation in witch are interested is to check
                  * if the state become LINKED because of the #1 situation
@@ -1140,7 +1140,7 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee)
 
 	ieee->associate_seq++;
 
-	/* don't scan, and avoid to have the RX path possibily
+	/* don't scan, and avoid to have the RX path possibly
 	 * try again to associate. Even do not react to AUTH or
 	 * ASSOC response. Just wait for the retry wq to be scheduled.
 	 * Here we will check if there are good nets to associate
@@ -1346,14 +1346,14 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
 		//printk("apset=%d apmatch=%d ssidset=%d ssidbroad=%d ssidmatch=%d\n",apset,apmatch,ssidset,ssidbroad,ssidmatch);
 
 		if (	/* if the user set the AP check if match.
-			 * if the network does not broadcast essid we check the user supplyed ANY essid
+			 * if the network does not broadcast essid we check the user supplied ANY essid
 			 * if the network does broadcast and the user does not set essid it is OK
 			 * if the network does broadcast and the user did set essid chech if essid match
 			 */
 				( apset && apmatch &&
 				  ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset)) ) ||
 				/* if the ap is not set, check that the user set the bssid
-				 * and the network does bradcast and that those two bssid matches
+				 * and the network does broadcast and that those two bssid matches
 				 */
 				(!apset && ssidset && ssidbroad && ssidmatch)
 		   ){
@@ -1821,7 +1821,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 
 					while (left >= sizeof(struct ieee80211_info_element_hdr)) {
 						if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
-							printk(KERN_WARNING "[re]associate reeponse error!");
+							printk(KERN_WARNING "[re]associate response error!");
 							return 1;
 						}
 						switch (info_element->id) {
@@ -1905,7 +1905,7 @@ associate_complete:
 							}
 						}else{
 							ieee->softmac_stats.rx_auth_rs_err++;
-							IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode);
+							IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode);
 							ieee80211_associate_abort(ieee);
 						}
 
@@ -2184,15 +2184,15 @@ void ieee80211_start_ibss_wq(struct work_struct *work)
 
 	if(ieee->state == IEEE80211_NOLINK)
 		ieee->current_network.channel = 10;
-	/* if not then the state is not linked. Maybe the user swithced to
+	/* if not then the state is not linked. Maybe the user switched to
 	 * ad-hoc mode just after being in monitor mode, or just after
 	 * being very few time in managed mode (so the card have had no
 	 * time to scan all the chans..) or we have just run up the iface
 	 * after setting ad-hoc mode. So we have to give another try..
 	 * Here, in ibss mode, should be safe to do this without extra care
-	 * (in bss mode we had to make sure no-one tryed to associate when
+	 * (in bss mode we had to make sure no-one tried to associate when
 	 * we had just checked the ieee->state and we was going to start the
-	 * scan) beacause in ibss mode the ieee80211_new_net function, when
+	 * scan) because in ibss mode the ieee80211_new_net function, when
 	 * finds a good net, just set the ieee->state to IEEE80211_LINKED,
 	 * so, at worst, we waste a bit of time to initiate an unneeded syncro
 	 * scan, that will stop at the first round because it sees the state
@@ -2342,7 +2342,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work)
 		goto exit;
 	/* until we do not set the state to IEEE80211_NOLINK
 	* there are no possibility to have someone else trying
-	* to start an association procdure (we get here with
+	* to start an association procedure (we get here with
 	* ieee->state = IEEE80211_ASSOCIATING).
 	* When we set the state to IEEE80211_NOLINK it is possible
 	* that the RX path run an attempt to associate, but
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
index e46ff2ffa09b..5d204906baf7 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
@@ -362,7 +362,7 @@ int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
 		ieee80211_stop_protocol(ieee);
 
 	/* this is just to be sure that the GET wx callback
-	 * has consisten infos. not needed otherwise
+	 * has consistent infos. not needed otherwise
 	 */
 	spin_lock_irqsave(&ieee->lock, flags);
 
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
index 552115cd760e..89ed86ef0d15 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
@@ -328,7 +328,7 @@ int ieee80211_rtl_xmit(struct sk_buff *skb,
 	//printk(KERN_WARNING "upper layer packet!\n");
 	spin_lock_irqsave(&ieee->lock, flags);
 
-	/* If there is no driver handler to take the TXB, dont' bother
+	/* If there is no driver handler to take the TXB, don't bother
 	 * creating it... */
 	if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))||
 	   ((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {
@@ -413,10 +413,7 @@ int ieee80211_rtl_xmit(struct sk_buff *skb,
 
 		/* Determine fragmentation size based on destination (multicast
 		* and broadcast are not fragmented) */
-//		if (is_multicast_ether_addr(dest) ||
-//		is_broadcast_ether_addr(dest)) {
-		if (is_multicast_ether_addr(header.addr1) ||
-		is_broadcast_ether_addr(header.addr1)) {
+		if (is_multicast_ether_addr(header.addr1)) {
 			frag_size = MAX_FRAG_THRESHOLD;
 			qos_ctl = QOS_CTL_NOTCONTAIN_ACK;
 		}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
index ca414a915a4e..c7917b24425c 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
@@ -363,7 +363,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
 				       (*crypt)->priv);
 		sec.flags |= (1 << key);
 		/* This ensures a key will be activated if no key is
-		 * explicitely set */
+		 * explicitly set */
 		if (key == sec.active_key)
 			sec.flags |= SEC_ACTIVE_KEY;
 		ieee->tx_keyidx = key;//by wb 080312
diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
index a2c46ae4a400..2682afbac4ff 100644
--- a/drivers/staging/rtl8187se/r8180.h
+++ b/drivers/staging/rtl8187se/r8180.h
@@ -11,7 +11,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thanks the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
@@ -514,12 +514,12 @@ typedef struct r8180_priv
 	bool bDefaultAntenna1;
 	u8 SignalStrength;
 	long Stats_SignalStrength;
-	long LastSignalStrengthInPercent; // In percentange, used for smoothing, e.g. Moving Average.
+	long LastSignalStrengthInPercent; // In percentage, used for smoothing, e.g. Moving Average.
 	u8	 SignalQuality; // in 0-100 index.
 	long Stats_SignalQuality;
 	long RecvSignalPower; // in dBm.
 	long Stats_RecvSignalPower;
-	u8	 LastRxPktAntenna;	// +by amy 080312 Antenn which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25.
+	u8	 LastRxPktAntenna;	// +by amy 080312 Antenna which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25.
 	u32 AdRxOkCnt;
 	long AdRxSignalStrength;
 	u8 CurrAntennaIndex;			// Index to current Antenna (both Tx and Rx).
@@ -530,7 +530,7 @@ typedef struct r8180_priv
 	long AdRxSsThreshold;			// Signal strength threshold to switch antenna.
 	long AdMaxRxSsThreshold;			// Max value of AdRxSsThreshold.
 	bool bAdSwitchedChecking;		// TRUE if we shall shall check Rx signal strength for last time switching antenna.
-	long AdRxSsBeforeSwitched;		// Rx signal strength before we swithed antenna.
+	long AdRxSsBeforeSwitched;		// Rx signal strength before we switched antenna.
 	struct timer_list SwAntennaDiversityTimer;
 //by amy for antenna
 //{by amy 080312
@@ -553,7 +553,7 @@ typedef struct r8180_priv
 	bool				bDigMechanism; // TRUE if DIG is enabled, FALSE ow.
 	bool				bRegHighPowerMechanism; // For High Power Mechanism. 061010, by rcnjko.
 	u32					FalseAlarmRegValue;
-	u8					RegDigOfdmFaUpTh; // Upper threhold of OFDM false alarm, which is used in DIG.
+	u8					RegDigOfdmFaUpTh; // Upper threshold of OFDM false alarm, which is used in DIG.
 	u8					DIG_NumberFallbackVote;
 	u8					DIG_NumberUpgradeVote;
 	// For HW antenna diversity, added by Roger, 2008.01.30.
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 4fe52f6b0034..fd22b75aea4f 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -1329,7 +1329,7 @@ u16 N_DBPSOfRate(u16 DataRate)
 }
 
 /*
- * For Netgear case, they want good-looking singal strength.
+ * For Netgear case, they want good-looking signal strength.
  */
 long NetgearSignalStrengthTranslate(long LastSS, long CurrSS)
 {
@@ -1380,7 +1380,7 @@ long TranslateToDbm8185(u8 SignalStrengthIndex)
 
 /*
  * Perform signal smoothing for dynamic mechanism.
- * This is different with PerformSignalSmoothing8185 in smoothing fomula.
+ * This is different with PerformSignalSmoothing8185 in smoothing formula.
  * No dramatic adjustion is apply because dynamic mechanism need some degree
  * of correctness. Ported from 8187B.
  */
@@ -1535,7 +1535,7 @@ void rtl8180_rx(struct net_device *dev)
 			/* HW is probably passing several buggy frames
 			* without FD or LD flag set.
 			* Throw this garbage away to prevent skb
-			* memory exausting
+			* memory exhausting
 			*/
 			if (!priv->rx_skb_complete)
 				dev_kfree_skb_any(priv->rx_skb);
@@ -1648,14 +1648,14 @@ void rtl8180_rx(struct net_device *dev)
 			priv->Stats_SignalQuality = (long)(priv->Stats_SignalQuality * 5 + (long)priv->SignalQuality + 5) / 6;
 			priv->Stats_RecvSignalPower = (long)(priv->Stats_RecvSignalPower * 5 + priv->RecvSignalPower - 1) / 6;
 
-		/* Figure out which antenna that received the lasted packet. */
+		/* Figure out which antenna that received the last packet. */
 			priv->LastRxPktAntenna = Antenna ? 1 : 0; /* 0: aux, 1: main. */
 			SwAntennaDiversityRxOk8185(dev, priv->SignalStrength);
 		}
 
 		if (first) {
 			if (!priv->rx_skb_complete) {
-				/* seems that HW sometimes fails to reiceve and
+				/* seems that HW sometimes fails to receive and
 				   doesn't provide the last descriptor */
 				dev_kfree_skb_any(priv->rx_skb);
 				priv->stats.rxnolast++;
@@ -1672,7 +1672,7 @@ void rtl8180_rx(struct net_device *dev)
 			priv->rx_skb_complete = 0;
 			priv->rx_skb->dev = dev;
 		} else {
-			/* if we are here we should  have already RXed
+			/* if we are here we should have already RXed
 			* the first frame.
 			* If we get here and the skb is not allocated then
 			* we have just throw out garbage (skb not allocated)
@@ -1821,15 +1821,15 @@ rate) {
 /*
  * This is a rough attempt to TX a frame
  * This is called by the ieee 80211 stack to TX management frames.
- * If the ring is full packet are dropped (for data frame the queue
+ * If the ring is full packets are dropped (for data frame the queue
  * is stopped before this can happen). For this reason it is better
  * if the descriptors are larger than the largest management frame
- * we intend to TX: i'm unsure what the HW does if it will not found
+ * we intend to TX: i'm unsure what the HW does if it will not find
  * the last fragment of a frame because it has been dropped...
  * Since queues for Management and Data frames are different we
  * might use a different lock than tx_lock (for example mgmt_tx_lock)
  */
-/* these function may loops if invoked with 0 descriptors or 0 len buffer */
+/* these function may loop if invoked with 0 descriptors or 0 len buffer */
 int rtl8180_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -2003,8 +2003,7 @@ short rtl8180_tx(struct net_device *dev, u8* txbuf, int len, int priority,
 	}
 
 		memcpy(&dest, frag_hdr->addr1, ETH_ALEN);
-		if (is_multicast_ether_addr(dest) ||
-				is_broadcast_ether_addr(dest)) {
+		if (is_multicast_ether_addr(dest)) {
 			Duration = 0;
 			RtsDur = 0;
 			bRTSEnable = 0;
@@ -2378,7 +2377,7 @@ void rtl8180_wmm_param_update(struct work_struct *work)
 				u8		u1bAIFS;
 				u32		u4bAcParam;
 				pAcParam = (PAC_PARAM)(&AcParam);
-				/* Retrive paramters to udpate. */
+				/* Retrieve paramters to update. */
 				u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime;
 				u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit))<<AC_PARAM_TXOP_LIMIT_OFFSET)|
 					      (((u32)(pAcParam->f.Ecw.f.ECWmax))<<AC_PARAM_ECW_MAX_OFFSET)|
@@ -2414,7 +2413,7 @@ void rtl8180_wmm_param_update(struct work_struct *work)
 			u8		u1bAIFS;
 			u32		u4bAcParam;
 
-			/* Retrive paramters to udpate. */
+			/* Retrieve paramters to update. */
 			eACI = pAcParam->f.AciAifsn.f.ACI;
 			/* Mode G/A: slotTimeTimer = 9; Mode B: 20 */
 			u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime;
@@ -2700,7 +2699,7 @@ short rtl8180_init(struct net_device *dev)
 	priv->bTxPowerTrack = false;
 	priv->ThermalMeter = 0;
 	priv->FalseAlarmRegValue = 0;
-	priv->RegDigOfdmFaUpTh = 0xc; /* Upper threhold of OFDM false alarm, which is used in DIG. */
+	priv->RegDigOfdmFaUpTh = 0xc; /* Upper threshold of OFDM false alarm, which is used in DIG. */
 	priv->DIG_NumberFallbackVote = 0;
 	priv->DIG_NumberUpgradeVote = 0;
 	priv->LastSignalStrengthInPercent = 0;
@@ -2896,7 +2895,7 @@ short rtl8180_init(struct net_device *dev)
 		priv->chtxpwr_ofdm[i+1] = (word & 0xff00) >> 8;
 	}
 
-	/* 3Read crystal calibtration and thermal meter indication on 87SE. */
+	/* 3Read crystal calibration and thermal meter indication on 87SE. */
 	eeprom_93cx6_read(&eeprom, EEPROM_RSV>>1, &tmpu16);
 
 	/* Crystal calibration for Xin and Xout resp. */
@@ -3140,7 +3139,7 @@ void rtl8180_adapter_start(struct net_device *dev)
 
 	/*
 	 * The following is very strange. seems to be that 1 means test mode,
-	 * but we need to acknolwledges the nic when a packet is ready
+	 * but we need to acknowledges the nic when a packet is ready
 	 * although we set it to 0
 	 */
 
@@ -3971,7 +3970,7 @@ irqreturn_t rtl8180_interrupt(int irq, void *netdev, struct pt_regs *regs)
 	}
 
 	if (inta == 0xffff) {
-		/* HW disappared */
+		/* HW disappeared */
 		spin_unlock_irqrestore(&priv->irq_th_lock, flags);
 		return IRQ_HANDLED;
 	}
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
index 4d7a5951486e..b8f2ba010a04 100644
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -2,7 +2,7 @@
 #include "r8180_hw.h"
 #include "r8180_93cx6.h"
 
- /*	Return TRUE if we shall perform High Power Mecahnism, FALSE otherwise. */
+ /*	Return TRUE if we shall perform High Power Mechanism, FALSE otherwise. */
 #define RATE_ADAPTIVE_TIMER_PERIOD      300
 
 bool CheckHighPower(struct net_device *dev)
@@ -105,7 +105,7 @@ void rtl8180_tx_pw_wq(struct work_struct *work)
 
 
 /*
- *	Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise.
+ *	Return TRUE if we shall perform DIG Mechanism, FALSE otherwise.
  */
 bool CheckDig(struct net_device *dev)
 {
@@ -507,7 +507,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
 	 *		and retry rate.
 	 * (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated
 	 *		situation, Initial Gain Update is upon on DIG mechanism except CCK rate.
-	 * (4) Add the mehanism of trying to upgrade tx rate.
+	 * (4) Add the mechanism of trying to upgrade tx rate.
 	 * (5) Record the information of upping tx rate to avoid trying upping tx rate constantly.
 	 *
 	 */
@@ -528,7 +528,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
 	if (priv->bTryuping == true) {
 		/* 2 For Test Upgrading mechanism
 		 * Note:
-		 *	Sometimes the throughput is upon on the capability bwtween the AP and NIC,
+		 *	Sometimes the throughput is upon on the capability between the AP and NIC,
 		 *	thus the low data rate does not improve the performance.
 		 *	We randomly upgrade the data rate and check if the retry rate is improved.
 		 */
@@ -704,7 +704,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
 
 			/* 
 			 * The difference in throughput between 48Mbps and 36Mbps is 8M.
-			 * So, we must be carefully in this rate scale. Isaiah 2008-02-15.
+			 * So, we must be careful in this rate scale. Isaiah 2008-02-15.
 			 */
 			if (((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) &&
 				(priv->FailTxRateCount > 2))
@@ -1009,7 +1009,7 @@ void SwAntennaDiversity(struct net_device *dev)
 			if (priv->AdCheckPeriod > priv->AdMaxCheckPeriod)
 				priv->AdCheckPeriod = priv->AdMaxCheckPeriod;
 
-			/* Wrong deceision => switch back. */
+			/* Wrong decision => switch back. */
 			SwitchAntenna(dev);
 		} else {
 		/* Rx Signal Strength is improved. */
@@ -1057,7 +1057,7 @@ void SwAntennaDiversity(struct net_device *dev)
 		}
 		/*
 		 * <Roger_Notes> We evaluate Rx signal strength ONLY when default antenna
-		 * didn't changed by HW evaluation.
+		 * didn't change by HW evaluation.
 		 * 2008.02.27.
 		 *
 		 * [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05
@@ -1098,7 +1098,7 @@ void SwAntennaDiversity(struct net_device *dev)
 	priv->AdAuxAntennaRxOkCnt = 0;
 }
 
- /*	Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise. */
+ /*	Return TRUE if we shall perform Tx Power Tracking Mechanism, FALSE otherwise. */
 bool CheckTxPwrTracking(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
index ee5b867fd0d4..d28c1d996084 100644
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -190,7 +190,7 @@ static void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch)
 		write_phy_cck(dev, 0x44 + i, power);
 	}
 
-	/* FIXME Is this delay really needeed ? */
+	/* FIXME Is this delay really needed ? */
 	force_pci_posting(dev);
 	mdelay(1);
 
@@ -479,7 +479,7 @@ s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode,
 
 	/*
 	 * TRUE if we want to use a default implementation.
-	 * We shall set it to FALSE when we have exact translation formular
+	 * We shall set it to FALSE when we have exact translation formula
 	 * for target IC. 070622, by rcnjko.
 	 */
 	if (bUseDefault) {
diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c
index 303ec691262a..46ee6f47f525 100644
--- a/drivers/staging/rtl8187se/r8180_wx.c
+++ b/drivers/staging/rtl8187se/r8180_wx.c
@@ -13,7 +13,7 @@
 
 	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
 
-	We want to tanks the Authors of those projects and the Ndiswrapper
+	We want to thanks the Authors of those projects and the Ndiswrapper
 	project Authors.
 */
 
@@ -1181,7 +1181,7 @@ static iw_handler r8180_wx_handlers[] =	{
 		r8180_wx_set_wap,			/* SIOCSIWAP */
 		r8180_wx_get_wap,			/* SIOCGIWAP */
 		r8180_wx_set_mlme,			/* SIOCSIWMLME*/
-		dummy,					/* SIOCGIWAPLIST -- depricated */
+		dummy,					/* SIOCGIWAPLIST -- deprecated */
 		r8180_wx_set_scan,			/* SIOCSIWSCAN */
 		r8180_wx_get_scan,			/* SIOCGIWSCAN */
 		r8180_wx_set_essid,			/* SIOCSIWESSID */
@@ -1369,7 +1369,7 @@ static inline int is_same_network(struct ieee80211_network *src,
 			(dst->capability & WLAN_CAPABILITY_BSS)));
 }
 
-/* WB modefied to show signal to GUI on 18-01-2008 */
+/* WB modified to show signal to GUI on 18-01-2008 */
 static struct iw_statistics *r8180_get_wireless_stats(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
diff --git a/drivers/staging/rtl8187se/r8180_wx.h b/drivers/staging/rtl8187se/r8180_wx.h
index 735d03dceed3..408191403112 100644
--- a/drivers/staging/rtl8187se/r8180_wx.h
+++ b/drivers/staging/rtl8187se/r8180_wx.h
@@ -7,7 +7,7 @@
 	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
 	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+	We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
 */
 
 /* this file (will) contains wireless extension handlers*/
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 4b0b830f9ab6..914495783c06 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -1,22 +1,22 @@
-/*++
-Copyright (c) Realtek Semiconductor Corp. All rights reserved.
-
-Module Name:
-	r8185b_init.c
-
-Abstract:
-	Hardware Initialization and Hardware IO for RTL8185B
-
-Major Change History:
-	When		Who				What
-	----------	---------------		-------------------------------
-	2006-11-15    Xiong		Created
-
-Notes:
-	This file is ported from RTL8185B Windows driver.
-
-
---*/
+/*
+ * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Module Name:
+ *	r8185b_init.c
+ *
+ * Abstract:
+ *	Hardware Initialization and Hardware IO for RTL8185B
+ *
+ * Major Change History:
+ *	When		Who				What
+ *	----------	---------------		-------------------------------
+ *	2006-11-15	Xiong			Created
+ *
+ * Notes:
+ *	This file is ported from RTL8185B Windows driver.
+ *
+ *
+ */
 
 /*--------------------------Include File------------------------------------*/
 #include <linux/spinlock.h>
@@ -25,155 +25,134 @@ Notes:
 #include "r8180_rtl8225.h" /* RTL8225 Radio frontend */
 #include "r8180_93cx6.h"   /* Card EEPROM */
 #include "r8180_wx.h"
-
 #include "ieee80211/dot11d.h"
-
-
 /* #define CONFIG_RTL8180_IO_MAP */
-
 #define TC_3W_POLL_MAX_TRY_CNT 5
+
 static u8 MAC_REG_TABLE[][2] =	{
-                        /*PAGA 0:	*/
-						/* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185()	*/
-						/* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185().					*/
-						/* 0x1F0~0x1F8  set in MacConfig_85BASIC()												*/
-						{0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
-						{0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
-						{0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
-						{0x94, 0x0F}, {0x95, 0x32},
-						{0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00},
-						{0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32},
-						{0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4},
-						{0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
-						{0xff, 0x00},
-
-						/*PAGE 1:	*/
-						/* For Flextronics system Logo PCIHCT failure:	*/
-				/* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1	*/
-						{0x5e, 0x01},
-						{0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
-						{0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
-						{0x82, 0xFF}, {0x83, 0x03},
-						{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */
-						{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},/* lzm add 080826 */
-						{0xe2, 0x00},
-
-
-						/* PAGE 2: */
-						{0x5e, 0x02},
-						{0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5},
-						{0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff},
-						{0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08},
-						{0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f},
-						{0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f},
-						{0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
-						{0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
-
-						/* PAGA 0: */
-						{0x5e, 0x00}, {0x9f, 0x03}
-			};
-
-
-static u8  ZEBRA_AGC[]	=	{
-			0,
-			0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
-			0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
-			0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
-			0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-			0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
-			0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
-			0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
-			0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
-			};
-
-static u32 ZEBRA_RF_RX_GAIN_TABLE[]	=	{
-			0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
-			0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
-			0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
-			0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
-			0x0183, 0x0163, 0x0143, 0x0123, 0x0103
+	/*PAGA 0:	*/
+	/* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */
+	/* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */
+	/* 0x1F0~0x1F8  set in MacConfig_85BASIC() */
+	{0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
+	{0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
+	{0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
+	{0x94, 0x0F}, {0x95, 0x32},
+	{0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00},
+	{0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32},
+	{0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4},
+	{0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
+	{0xff, 0x00},
+
+	/*PAGE 1: */
+	/* For Flextronics system Logo PCIHCT failure: */
+	/* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */
+	{0x5e, 0x01},
+	{0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
+	{0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
+	{0x82, 0xFF}, {0x83, 0x03},
+	{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */
+	{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22}, /* lzm add 080826 */
+	{0xe2, 0x00},
+
+
+	/* PAGE 2: */
+	{0x5e, 0x02},
+	{0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5},
+	{0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff},
+	{0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08},
+	{0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f},
+	{0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f},
+	{0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
+	{0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
+
+	/* PAGA 0: */
+	{0x5e, 0x00}, {0x9f, 0x03}
+	};
+
+
+static u8  ZEBRA_AGC[] = {
+	0,
+	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
+	0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
+	0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
+	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
+	0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
+	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
+	0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
+	};
+
+static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
+	0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
+	0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
+	0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
+	0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
+	0x0183, 0x0163, 0x0143, 0x0123, 0x0103
 	};
 
-static u8 OFDM_CONFIG[]	=	{
-			/* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX				*/
-			/* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode					*/
-			/* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test	*/
-
-			/* 0x00	*/
-			0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
-			0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
-			/* 0x10	*/
-			0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
-			0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
-			/* 0x20	*/
-			0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
-			0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
-			/* 0x30	*/
-			0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
-			0xD8, 0x3C, 0x7B, 0x10, 0x10
-		};
-
-/*	---------------------------------------------------------------
-	*	Hardware IO
-	*	the code is ported from Windows source code
-	----------------------------------------------------------------*/
-
-void
-PlatformIOWrite1Byte(
-	struct net_device *dev,
-	u32		offset,
-	u8		data
-	)
+static u8 OFDM_CONFIG[]	= {
+	/* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */
+	/* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */
+	/* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */
+	/* 0x00	*/
+	0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
+	0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
+	/* 0x10	*/
+	0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
+	0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
+	/* 0x20	*/
+	0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
+	0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
+	/* 0x30	*/
+	0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
+	0xD8, 0x3C, 0x7B, 0x10, 0x10
+	};
+
+	/*---------------------------------------------------------------
+	 *	Hardware IO
+	 *	the code is ported from Windows source code
+	 *---------------------------------------------------------------
+	 */
+
+void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
 {
 	write_nic_byte(dev, offset, data);
-	read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko.	*/
-
+	read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
 }
 
-void
-PlatformIOWrite2Byte(
-	struct net_device *dev,
-	u32		offset,
-	u16		data
-	)
+void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
 {
 	write_nic_word(dev, offset, data);
 	read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
-
-
 }
+
 u8 PlatformIORead1Byte(struct net_device *dev, u32 offset);
 
-void
-PlatformIOWrite4Byte(
-	struct net_device *dev,
-	u32		offset,
-	u32		data
-	)
+void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 {
-/* {by amy 080312 */
-if (offset == PhyAddr)	{
-/* For Base Band configuration. */
+	if (offset == PhyAddr) {
+	/* For Base Band configuration. */
 		unsigned char	cmdByte;
 		unsigned long	dataBytes;
 		unsigned char	idx;
-		u8	u1bTmp;
+		u8		u1bTmp;
 
 		cmdByte = (u8)(data & 0x000000ff);
 		dataBytes = data>>8;
 
 		/*
-			071010, rcnjko:
-			The critical section is only BB read/write race condition.
-			Assumption:
-			1. We assume NO one will access BB at DIRQL, otherwise, system will crash for
-			acquiring the spinlock in such context.
-			2. PlatformIOWrite4Byte() MUST NOT be recursive.
-		*/
-/*		NdisAcquireSpinLock( &(pDevice->IoSpinLock) );	*/
-
-		for (idx = 0; idx < 30; idx++)	{ 
-		/* Make sure command bit is clear before access it.	*/
+		 *	071010, rcnjko:
+		 *	The critical section is only BB read/write race condition.
+		 *	Assumption:
+		 *	1. We assume NO one will access BB at DIRQL, otherwise, system will crash for
+		 *	acquiring the spinlock in such context.
+		 *	2. PlatformIOWrite4Byte() MUST NOT be recursive.
+		 */
+		/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */
+
+		for (idx = 0; idx < 30; idx++) {
+		/* Make sure command bit is clear before access it. */
 			u1bTmp = PlatformIORead1Byte(dev, PhyAddr);
 			if ((u1bTmp & BIT7) == 0)
 				break;
@@ -186,20 +165,14 @@ if (offset == PhyAddr)	{
 
 		write_nic_byte(dev, offset, cmdByte);
 
-/*		NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
-	}
-/* by amy 080312} */
-	else	{
+		/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
+	} else {
 		write_nic_dword(dev, offset, data);
 		read_nic_dword(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
 	}
 }
 
-u8
-PlatformIORead1Byte(
-	struct net_device *dev,
-	u32		offset
-	)
+u8 PlatformIORead1Byte(struct net_device *dev, u32 offset)
 {
 	u8	data = 0;
 
@@ -209,11 +182,7 @@ PlatformIORead1Byte(
 	return data;
 }
 
-u16
-PlatformIORead2Byte(
-	struct net_device *dev,
-	u32		offset
-	)
+u16 PlatformIORead2Byte(struct net_device *dev, u32 offset)
 {
 	u16	data = 0;
 
@@ -223,11 +192,7 @@ PlatformIORead2Byte(
 	return data;
 }
 
-u32
-PlatformIORead4Byte(
-	struct net_device *dev,
-	u32		offset
-	)
+u32 PlatformIORead4Byte(struct net_device *dev, u32 offset)
 {
 	u32	data = 0;
 
@@ -242,22 +207,19 @@ void SetOutputEnableOfRfPins(struct net_device *dev)
 	write_nic_word(dev, RFPinsEnable, 0x1bff);
 }
 
-static int
-HwHSSIThreeWire(
-	struct net_device *dev,
-	u8			*pDataBuf,
-	u8			nDataBufBitCnt,
-	int			bSI,
-	int			bWrite
-	)
+static int HwHSSIThreeWire(struct net_device *dev,
+			   u8 *pDataBuf,
+			   u8 nDataBufBitCnt,
+			   int bSI,
+			   int bWrite)
 {
 	int	bResult = 1;
 	u8	TryCnt;
 	u8	u1bTmp;
 
-	do	{
+	do {
 		/* Check if WE and RE are cleared. */
-		for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++)	{
+		for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
 			u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
 			if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0)
 				break;
@@ -275,15 +237,15 @@ HwHSSIThreeWire(
 		u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
 
 		if (bSI)
-			u1bTmp |=   RF_SW_CFG_SI;   /* reg08[1]=1 Serial Interface(SI)	*/
+			u1bTmp |=   RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */
 
 		else
-			u1bTmp &= ~RF_SW_CFG_SI;  /* reg08[1]=0 Parallel Interface(PI)	*/
+			u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */
 
 
 		write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
 
-		if (bSI)	{
+		if (bSI) {
 			/* jong: HW SI read must set reg84[3]=0. */
 			u1bTmp = read_nic_byte(dev, RFPinsSelect);
 			u1bTmp &= ~BIT3;
@@ -291,14 +253,14 @@ HwHSSIThreeWire(
 		}
 		/*  Fill up data buffer for write operation. */
 
-		if (bWrite)	{
-			if (nDataBufBitCnt == 16)	{
+		if (bWrite) {
+			if (nDataBufBitCnt == 16) {
 				write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-			}	else if (nDataBufBitCnt == 64)	{
+			} else if (nDataBufBitCnt == 64) {
 			/* RTL8187S shouldn't enter this case */
 				write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf));
 				write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4)));
-			}	else	{
+			} else {
 				int idx;
 				int ByteCnt = nDataBufBitCnt / 8;
 								/* printk("%d\n",nDataBufBitCnt); */
@@ -324,11 +286,11 @@ HwHSSIThreeWire(
 					write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
 
 			}
-		}	else	{	/* read */
-			if (bSI)	{
-				/* SI - reg274[3:0] : RF register's Address	*/
+		} else {	/* read */
+			if (bSI) {
+				/* SI - reg274[3:0] : RF register's Address */
 				write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-			}	else	{
+			} else {
 				/*  PI - reg274[15:12] : RF register's Address */
 				write_nic_word(dev, SW_3W_DB0, (*((u16 *)pDataBuf)) << 12);
 			}
@@ -343,7 +305,7 @@ HwHSSIThreeWire(
 
 
 		/* Check if DONE is set. */
-		for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++)	{
+		for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
 			u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
 			if ((u1bTmp & SW_3W_CMD1_DONE) != 0)
 				break;
@@ -353,12 +315,12 @@ HwHSSIThreeWire(
 
 		write_nic_byte(dev, SW_3W_CMD1, 0);
 
-		/* Read back data for read operation.	*/
-		if (bWrite == 0)	{
-			if (bSI)		{
+		/* Read back data for read operation. */
+		if (bWrite == 0) {
+			if (bSI) {
 				/* Serial Interface : reg363_362[11:0] */
 				*((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ;
-			}	else	{
+			} else {
 				/* Parallel Interface : reg361_360[11:0] */
 				*((u16 *)pDataBuf) = read_nic_word(dev, PI_DATA_READ);
 			}
@@ -366,13 +328,12 @@ HwHSSIThreeWire(
 			*((u16 *)pDataBuf) &= 0x0FFF;
 		}
 
-	}	while (0);
+	} while (0);
 
 	return bResult;
 }
 
-void
-RF_WriteReg(struct net_device *dev, u8 offset, u32 data)
+void RF_WriteReg(struct net_device *dev, u8 offset, u32 data)
 {
 	u32 data2Write;
 	u8 len;
@@ -400,11 +361,7 @@ u32 RF_ReadReg(struct net_device *dev, u8 offset)
 
 
 /* by Owen on 04/07/14 for writing BB register successfully */
-void
-WriteBBPortUchar(
-	struct net_device *dev,
-	u32		Data
-	)
+void WriteBBPortUchar(struct net_device *dev, u32 Data)
 {
 	/* u8	TimeoutCounter; */
 	u8	RegisterContent;
@@ -421,11 +378,7 @@ WriteBBPortUchar(
 	}
 }
 
-u8
-ReadBBPortUchar(
-	struct net_device *dev,
-	u32		addr
-	)
+u8 ReadBBPortUchar(struct net_device *dev, u32 addr)
 {
 	/*u8	TimeoutCounter; */
 	u8	RegisterContent;
@@ -435,66 +388,62 @@ ReadBBPortUchar(
 
 	return RegisterContent;
 }
-/* {by amy 080312 */
 /*
-	Description:
-	Perform Antenna settings with antenna diversity on 87SE.
-		Created by Roger, 2008.01.25.
-*/
-bool
-SetAntennaConfig87SE(
-	struct net_device *dev,
-	u8			DefaultAnt,		/* 0: Main, 1: Aux.			*/
-	bool		bAntDiversity	/* 1:Enable, 0: Disable.	*/
-)
+ *	Description:
+ *	Perform Antenna settings with antenna diversity on 87SE.
+ *		Created by Roger, 2008.01.25.
+ */
+bool SetAntennaConfig87SE(struct net_device *dev,
+			  u8   DefaultAnt, /* 0: Main, 1: Aux. */
+			  bool bAntDiversity) /* 1:Enable, 0: Disable. */
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	bool   bAntennaSwitched = true;
 
 	/* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */
 
-	/* Threshold for antenna diversity.	*/
+	/* Threshold for antenna diversity. */
 	write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */
 
-	if (bAntDiversity)	{	/*	Enable Antenna Diversity.	*/
-		if (DefaultAnt == 1)	{	/* aux antenna			*/
+	if (bAntDiversity) {	/*	Enable Antenna Diversity. */
+		if (DefaultAnt == 1) {	/* aux antenna */
 
-			/* Mac register, aux antenna	*/
+			/* Mac register, aux antenna */
 			write_nic_byte(dev, ANTSEL, 0x00);
 
-			/* Config CCK RX antenna.		*/
+			/* Config CCK RX antenna. */
 			write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
 			write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */
 
-			/* Config OFDM RX antenna.	*/
-			write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54	*/
-			write_phy_ofdm(dev, 0x18, 0xb2);	/* Reg18 : b2		*/
-		}	else	{	/*  use main antenna	*/
-			/* Mac register, main antenna		*/
+			/* Config OFDM RX antenna. */
+			write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
+			write_phy_ofdm(dev, 0x18, 0xb2);	/* Reg18 : b2 */
+		} else { /*  use main antenna */
+			/* Mac register, main antenna */
 			write_nic_byte(dev, ANTSEL, 0x03);
-			/* base band				*/
-			/*  Config CCK RX antenna.	*/
-			write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b	*/
-			write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7	*/
+			/* base band */
+			/*  Config CCK RX antenna. */
+			write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
+			write_phy_cck(dev, 0x01, 0xc7); /* Reg01 : c7 */
 
 			/* Config OFDM RX antenna. */
 			write_phy_ofdm(dev, 0x0d, 0x5c);  /* Reg0d : 5c	*/
 			write_phy_ofdm(dev, 0x18, 0xb2);  /* Reg18 : b2	*/
 		}
-	}	else	{
+	} else {
 		/* Disable Antenna Diversity. */
-		if (DefaultAnt == 1)	{	/* aux Antenna */
+		if (DefaultAnt == 1) { /* aux Antenna */
 			/* Mac register, aux antenna */
 			write_nic_byte(dev, ANTSEL, 0x00);
 
 			/* Config CCK RX antenna. */
-			write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb	*/
-			write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47	*/
+			write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
+			write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */
 
 			/* Config OFDM RX antenna. */
-			write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54	*/
-			write_phy_ofdm(dev, 0x18, 0x32);	/* Reg18 : 32	*/
-		}	else	{	/* main Antenna */
+			write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
+			write_phy_ofdm(dev, 0x18, 0x32);	/* Reg18 : 32 */
+		} else { /* main Antenna */
 			/* Mac register, main antenna */
 			write_nic_byte(dev, ANTSEL, 0x03);
 
@@ -502,25 +451,22 @@ SetAntennaConfig87SE(
 			write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
 			write_phy_cck(dev, 0x01, 0x47); /* Reg01 : 47 */
 
-			/* Config OFDM RX antenna.		*/
-			write_phy_ofdm(dev, 0x0D, 0x5c);	/* Reg0d : 5c	*/
-			write_phy_ofdm(dev, 0x18, 0x32);	/*Reg18 : 32	*/
+			/* Config OFDM RX antenna. */
+			write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
+			write_phy_ofdm(dev, 0x18, 0x32); /*Reg18 : 32 */
 		}
 	}
 	priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */
 	return	bAntennaSwitched;
 }
-/* by amy 080312 */
 /*
----------------------------------------------------------------
-	*	Hardware Initialization.
-	*	the code is ported from Windows source code
-----------------------------------------------------------------*/
-
-void
-ZEBRA_Config_85BASIC_HardCode(
-	struct net_device *dev
-	)
+ *--------------------------------------------------------------
+ *		Hardware Initialization.
+ *		the code is ported from Windows source code
+ *--------------------------------------------------------------
+ */
+
+void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
 {
 
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@@ -532,163 +478,151 @@ ZEBRA_Config_85BASIC_HardCode(
 
 
 /*
-=============================================================================
-	87S_PCIE :: RADIOCFG.TXT
-=============================================================================
-*/
+ *===========================================================================
+ *	87S_PCIE :: RADIOCFG.TXT
+ *===========================================================================
+ */
 
 
 	/* Page1 : reg16-reg30 */
-	RF_WriteReg(dev, 0x00, 0x013f);			mdelay(1); /* switch to page1 */
-	u4bRF23 = RF_ReadReg(dev, 0x08);			mdelay(1);
-	u4bRF24 = RF_ReadReg(dev, 0x09);			mdelay(1);
+	RF_WriteReg(dev, 0x00, 0x013f);		mdelay(1); /* switch to page1 */
+	u4bRF23 = RF_ReadReg(dev, 0x08);	mdelay(1);
+	u4bRF24 = RF_ReadReg(dev, 0x09);	mdelay(1);
 
 	if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) {
 		d_cut = 1;
 		printk(KERN_INFO "rtl8187se: card type changed from C- to D-cut\n");
 	}
 
-	/* Page0 : reg0-reg15	*/
-
-	RF_WriteReg(dev, 0x00, 0x009f);			mdelay(1);/* 1	*/
-
-	RF_WriteReg(dev, 0x01, 0x06e0);			mdelay(1);
-
-	RF_WriteReg(dev, 0x02, 0x004d);			mdelay(1);/* 2	*/
-
-	RF_WriteReg(dev, 0x03, 0x07f1);			mdelay(1);/* 3	*/
-
-	RF_WriteReg(dev, 0x04, 0x0975);			mdelay(1);
-	RF_WriteReg(dev, 0x05, 0x0c72);			mdelay(1);
-	RF_WriteReg(dev, 0x06, 0x0ae6);			mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x00ca);			mdelay(1);
-	RF_WriteReg(dev, 0x08, 0x0e1c);			mdelay(1);
-	RF_WriteReg(dev, 0x09, 0x02f0);			mdelay(1);
-	RF_WriteReg(dev, 0x0a, 0x09d0);			mdelay(1);
-	RF_WriteReg(dev, 0x0b, 0x01ba);			mdelay(1);
-	RF_WriteReg(dev, 0x0c, 0x0640);			mdelay(1);
-	RF_WriteReg(dev, 0x0d, 0x08df);			mdelay(1);
-	RF_WriteReg(dev, 0x0e, 0x0020);			mdelay(1);
-	RF_WriteReg(dev, 0x0f, 0x0990);			mdelay(1);
-
+	/* Page0 : reg0-reg15 */
+
+	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1);/* 1	*/
+	RF_WriteReg(dev, 0x01, 0x06e0);		mdelay(1);
+	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1);/* 2	*/
+	RF_WriteReg(dev, 0x03, 0x07f1);		mdelay(1);/* 3	*/
+	RF_WriteReg(dev, 0x04, 0x0975);		mdelay(1);
+	RF_WriteReg(dev, 0x05, 0x0c72);		mdelay(1);
+	RF_WriteReg(dev, 0x06, 0x0ae6);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x00ca);		mdelay(1);
+	RF_WriteReg(dev, 0x08, 0x0e1c);		mdelay(1);
+	RF_WriteReg(dev, 0x09, 0x02f0);		mdelay(1);
+	RF_WriteReg(dev, 0x0a, 0x09d0);		mdelay(1);
+	RF_WriteReg(dev, 0x0b, 0x01ba);		mdelay(1);
+	RF_WriteReg(dev, 0x0c, 0x0640);		mdelay(1);
+	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1);
+	RF_WriteReg(dev, 0x0e, 0x0020);		mdelay(1);
+	RF_WriteReg(dev, 0x0f, 0x0990);		mdelay(1);
 
 	/*  Page1 : reg16-reg30 */
-	RF_WriteReg(dev, 0x00, 0x013f);			mdelay(1);
-
-	RF_WriteReg(dev, 0x03, 0x0806);			mdelay(1);
-
-	RF_WriteReg(dev, 0x04, 0x03a7);			mdelay(1);
-	RF_WriteReg(dev, 0x05, 0x059b);			mdelay(1);
-	RF_WriteReg(dev, 0x06, 0x0081);			mdelay(1);
-
-
-	RF_WriteReg(dev, 0x07, 0x01A0);			mdelay(1);
+	RF_WriteReg(dev, 0x00, 0x013f);		mdelay(1);
+	RF_WriteReg(dev, 0x03, 0x0806);		mdelay(1);
+	RF_WriteReg(dev, 0x04, 0x03a7);		mdelay(1);
+	RF_WriteReg(dev, 0x05, 0x059b);		mdelay(1);
+	RF_WriteReg(dev, 0x06, 0x0081);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x01A0);		mdelay(1);
 /* Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. */
-	RF_WriteReg(dev, 0x0a, 0x0001);			mdelay(1);
-	RF_WriteReg(dev, 0x0b, 0x0418);			mdelay(1);
+	RF_WriteReg(dev, 0x0a, 0x0001);		mdelay(1);
+	RF_WriteReg(dev, 0x0b, 0x0418);		mdelay(1);
 
 	if (d_cut) {
-		RF_WriteReg(dev, 0x0c, 0x0fbe);			mdelay(1);
-		RF_WriteReg(dev, 0x0d, 0x0008);			mdelay(1);
-		RF_WriteReg(dev, 0x0e, 0x0807);			mdelay(1); /* RX LO buffer */
-	}	else	{
-		RF_WriteReg(dev, 0x0c, 0x0fbe);			mdelay(1);
-		RF_WriteReg(dev, 0x0d, 0x0008);			mdelay(1);
-		RF_WriteReg(dev, 0x0e, 0x0806);			mdelay(1); /* RX LO buffer */
+		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
+		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
+		RF_WriteReg(dev, 0x0e, 0x0807);		mdelay(1); /* RX LO buffer */
+	} else {
+		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
+		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
+		RF_WriteReg(dev, 0x0e, 0x0806);		mdelay(1); /* RX LO buffer */
 	}
 
-	RF_WriteReg(dev, 0x0f, 0x0acc);			mdelay(1);
-
-	RF_WriteReg(dev, 0x00, 0x01d7);			mdelay(1); /* 6 */
+	RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
+	RF_WriteReg(dev, 0x00, 0x01d7);		mdelay(1); /* 6 */
+	RF_WriteReg(dev, 0x03, 0x0e00);		mdelay(1);
+	RF_WriteReg(dev, 0x04, 0x0e50);		mdelay(1);
 
-	RF_WriteReg(dev, 0x03, 0x0e00);			mdelay(1);
-	RF_WriteReg(dev, 0x04, 0x0e50);			mdelay(1);
-	for (i = 0; i <= 36; i++)	{
-		RF_WriteReg(dev, 0x01, i);                     mdelay(1);
+	for (i = 0; i <= 36; i++) {
+		RF_WriteReg(dev, 0x01, i);		mdelay(1);
 		RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1);
 	}
 
-	RF_WriteReg(dev, 0x05, 0x0203);			mdelay(1);	/* 203, 343	*/
-	RF_WriteReg(dev, 0x06, 0x0200);			mdelay(1);	/* 400		*/
+	RF_WriteReg(dev, 0x05, 0x0203);		mdelay(1); /* 203, 343 */
+	RF_WriteReg(dev, 0x06, 0x0200);		mdelay(1); /* 400 */
+	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
 
-	RF_WriteReg(dev, 0x00, 0x0137);			mdelay(1);	/* switch to reg16-reg30, and HSSI disable 137	*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd */
+	RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1); /* Z4 synthesizer loop filter setting, 392 */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
 
-	RF_WriteReg(dev, 0x0d, 0x0008);			mdelay(1);	/* Z4 synthesizer loop filter setting, 392		*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd */
+	RF_WriteReg(dev, 0x00, 0x0037);		mdelay(1); /* switch to reg0-reg15, and HSSI disable */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x00, 0x0037);			mdelay(1);	/* switch to reg0-reg15, and HSSI disable		*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
+	RF_WriteReg(dev, 0x04, 0x0160);		mdelay(1); /* CBC on, Tx Rx disable, High gain */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x04, 0x0160);			mdelay(1);	/* CBC on, Tx Rx disable, High gain				*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
+	RF_WriteReg(dev, 0x07, 0x0080);		mdelay(1); /* Z4 setted channel 1 */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x07, 0x0080);			mdelay(1);	/* Z4 setted channel 1							*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
+	RF_WriteReg(dev, 0x02, 0x088D);		mdelay(1); /* LC calibration */
+	mdelay(200); /* Deay 200 ms. */		/* 0xfd	*/
+	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
+	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x02, 0x088D);			mdelay(1);	/* LC calibration								*/
-	mdelay(200);	/* Deay 200 ms.	*/	/* 0xfd	*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
+	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */
+	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	RF_WriteReg(dev, 0x00, 0x0137);			mdelay(1);	/* switch to reg16-reg30 137, and HSSI disable 137	*/
-	mdelay(10);		/* Deay 10 ms.	*/	/* 0xfd	*/
-
-	RF_WriteReg(dev, 0x07, 0x0000);			mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x0180);			mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x0220);			mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x03E0);			mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x0000);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x0180);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x0220);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x03E0);		mdelay(1);
 
 	/* DAC calibration off 20070702	*/
-	RF_WriteReg(dev, 0x06, 0x00c1);			mdelay(1);
-	RF_WriteReg(dev, 0x0a, 0x0001);			mdelay(1);
-/* {by amy 080312 */
+	RF_WriteReg(dev, 0x06, 0x00c1);		mdelay(1);
+	RF_WriteReg(dev, 0x0a, 0x0001);		mdelay(1);
 	/* For crystal calibration, added by Roger, 2007.12.11. */
-	if (priv->bXtalCalibration)	{	/* reg 30.	*/
-	 /* enable crystal calibration.
-			RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
-			(2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0
-			(3)RF signal on/off when calibration[13], default: on, set BIT13=0.
-			So we should minus 4 BITs offset.		*/
-		RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);			mdelay(1);
+	if (priv->bXtalCalibration) { /* reg 30.	*/
+	 /*
+ 	  *  enable crystal calibration.
+	  *		RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
+	  *		(2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0
+	  *		(3)RF signal on/off when calibration[13], default: on, set BIT13=0.
+	  *		So we should minus 4 BITs offset. 
+	  */
+		RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
 		printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n",
-				(priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);
-	}	else	{
+		      (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);
+	} else {
 		/* using default value. Xin=6, Xout=6.	*/
-		RF_WriteReg(dev, 0x0f, 0x0acc);			mdelay(1);
+		RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
 	}
-/* by amy 080312 */
 
-	RF_WriteReg(dev, 0x00, 0x00bf);			mdelay(1); /* switch to reg0-reg15, and HSSI enable	*/
-	RF_WriteReg(dev, 0x0d, 0x08df);			mdelay(1); /* Rx BB start calibration, 00c//+edward	*/
-	RF_WriteReg(dev, 0x02, 0x004d);			mdelay(1); /* temperature meter off					*/
-	RF_WriteReg(dev, 0x04, 0x0975);			mdelay(1); /* Rx mode								*/
+	RF_WriteReg(dev, 0x00, 0x00bf);		mdelay(1); /* switch to reg0-reg15, and HSSI enable */
+	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1); /* Rx BB start calibration, 00c//+edward */
+	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1); /* temperature meter off */
+	RF_WriteReg(dev, 0x04, 0x0975);		mdelay(1); /* Rx mode */
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
-	RF_WriteReg(dev, 0x00, 0x0197);			mdelay(1); /* Rx mode*/	/*+edward	*/
-	RF_WriteReg(dev, 0x05, 0x05ab);			mdelay(1); /* Rx mode*/	/*+edward	*/
-	RF_WriteReg(dev, 0x00, 0x009f);			mdelay(1); /* Rx mode*/	/*+edward	*/
-
-	RF_WriteReg(dev, 0x01, 0x0000);			mdelay(1); /* Rx mode*/	/*+edward	*/
-	RF_WriteReg(dev, 0x02, 0x0000);			mdelay(1); /* Rx mode*/	/*+edward	*/
-	/* power save parameters.	*/
+	RF_WriteReg(dev, 0x00, 0x0197);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x05, 0x05ab);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x01, 0x0000);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x02, 0x0000);		mdelay(1); /* Rx mode*/	/*+edward */
+	/* power save parameters. */
 	u1b24E = read_nic_byte(dev, 0x24E);
 	write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6))));
 
 	/*=============================================================================
-
-	=============================================================================
-	CCKCONF.TXT
-	=============================================================================
-	*/
-	/*	[POWER SAVE] Power Saving Parameters by jong. 2007-11-27
-		CCK reg0x00[7]=1'b1 :power saving for TX (default)
-		CCK reg0x00[6]=1'b1: power saving for RX (default)
-		CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation.
-		CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
-		CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
-	*/
+	 *
+	 *===========================================================================
+	 * CCKCONF.TXT
+	 *===========================================================================
+	 *
+	 *	[POWER SAVE] Power Saving Parameters by jong. 2007-11-27
+	 *	CCK reg0x00[7]=1'b1 :power saving for TX (default)
+	 *	CCK reg0x00[6]=1'b1: power saving for RX (default)
+	 *	CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation.
+	 *	CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
+	 *	CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
+	 */
 
 	write_phy_cck(dev, 0x00, 0xc8);
 	write_phy_cck(dev, 0x06, 0x1c);
@@ -697,7 +631,7 @@ ZEBRA_Config_85BASIC_HardCode(
 	write_phy_cck(dev, 0x2f, 0x06);
 	write_phy_cck(dev, 0x01, 0x46);
 
-	/* power control	*/
+	/* power control */
 	write_nic_byte(dev, CCK_TXAGC, 0x10);
 	write_nic_byte(dev, OFDM_TXAGC, 0x1B);
 	write_nic_byte(dev, ANTSEL, 0x03);
@@ -705,14 +639,14 @@ ZEBRA_Config_85BASIC_HardCode(
 
 
 	/*
-	=============================================================================
-		AGC.txt
-	=============================================================================
-	*/
+	 *===========================================================================
+	 *	AGC.txt
+	 *===========================================================================
+	 */
 
 	write_phy_ofdm(dev, 0x00, 0x12);
 
-	for (i = 0; i < 128; i++)	{
+	for (i = 0; i < 128; i++) {
 
 		data = ZEBRA_AGC[i+1];
 		data = data << 8;
@@ -730,49 +664,43 @@ ZEBRA_Config_85BASIC_HardCode(
 	PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080);	/* Annie, 2006-05-05 */
 
 	/*
-	=============================================================================
-
-	=============================================================================
-	OFDMCONF.TXT
-	=============================================================================
-	*/
-
-	for (i = 0; i < 60; i++)	{
+	 *===========================================================================
+	 *
+	 *===========================================================================
+	 * OFDMCONF.TXT
+	 *===========================================================================
+	 */
+
+	for (i = 0; i < 60; i++) {
 		u4bRegOffset = i;
 		u4bRegValue = OFDM_CONFIG[i];
 
 		WriteBBPortUchar(dev,
-						(0x00000080 |
-						(u4bRegOffset & 0x7f) |
-						((u4bRegValue & 0xff) << 8)));
+				(0x00000080 |
+				(u4bRegOffset & 0x7f) |
+				((u4bRegValue & 0xff) << 8)));
 	}
 
 	/*
-	=============================================================================
-	by amy for antenna
-	=============================================================================
-	*/
-/* {by amy 080312 */
+	 *===========================================================================
+	 * by amy for antenna
+	 *===========================================================================
+	 */
 	/* Config Sw/Hw  Combinational Antenna Diversity. Added by Roger, 2008.02.26.	*/
 	SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity);
-/* by amy 080312} */
-/* by amy for antenna */
 }
 
 
-void
-UpdateInitialGain(
-	struct net_device *dev
-	)
+void UpdateInitialGain(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 
 	/* lzm add 080826 */
-	if (priv->eRFPowerState != eRfOn)	{
+	if (priv->eRFPowerState != eRfOn) {
 		/*	Don't access BB/RF under disable PLL situation.
-			RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n"));
-			Back to the original state
-		*/
+		 *	RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n"));
+		 *	Back to the original state
+		 */
 		priv->InitialGain = priv->InitialGainBackUp;
 		return;
 	}
@@ -826,7 +754,7 @@ UpdateInitialGain(
 		write_phy_ofdm(dev, 0x05, 0xfc);	mdelay(1);
 		break;
 
-	default:	/* MP */
+	default: /* MP */
 		write_phy_ofdm(dev, 0x17, 0x26);	mdelay(1);
 		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
 		write_phy_ofdm(dev, 0x05, 0xfa);	mdelay(1);
@@ -834,14 +762,11 @@ UpdateInitialGain(
 	}
 }
 /*
-	Description:
-		Tx Power tracking mechanism routine on 87SE.
-	Created by Roger, 2007.12.11.
-*/
-void
-InitTxPwrTracking87SE(
-	struct net_device *dev
-)
+ *	Description:
+ *		Tx Power tracking mechanism routine on 87SE.
+ *	Created by Roger, 2007.12.11.
+ */
+void InitTxPwrTracking87SE(struct net_device *dev)
 {
 	u32	u4bRfReg;
 
@@ -851,49 +776,41 @@ InitTxPwrTracking87SE(
 	RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN);			mdelay(1);
 }
 
-void
-PhyConfig8185(
-	struct net_device *dev
-	)
+void PhyConfig8185(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 		write_nic_dword(dev, RCR, priv->ReceiveConfig);
 	   priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03;
 	/*  RF config */
 	ZEBRA_Config_85BASIC_HardCode(dev);
-/* {by amy 080312 */
 	/* Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06. */
-	if (priv->bDigMechanism)	{
+	if (priv->bDigMechanism) {
 		if (priv->InitialGain == 0)
 			priv->InitialGain = 4;
 	}
 
 	/*
-		Enable thermal meter indication to implement TxPower tracking on 87SE.
-		We initialize thermal meter here to avoid unsuccessful configuration.
-		Added by Roger, 2007.12.11.
-	*/
+	 *	Enable thermal meter indication to implement TxPower tracking on 87SE.
+	 *	We initialize thermal meter here to avoid unsuccessful configuration.
+	 *	Added by Roger, 2007.12.11.
+	 */
 	if (priv->bTxPowerTrack)
 		InitTxPwrTracking87SE(dev);
 
-/* by amy 080312} */
 	priv->InitialGainBackUp = priv->InitialGain;
 	UpdateInitialGain(dev);
 
 	return;
 }
 
-void
-HwConfigureRTL8185(
-		struct net_device *dev
-		)
+void HwConfigureRTL8185(struct net_device *dev)
 {
 	/* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */
-	u8		bUNIVERSAL_CONTROL_RL = 0;
-	u8		bUNIVERSAL_CONTROL_AGC = 1;
-	u8		bUNIVERSAL_CONTROL_ANT = 1;
-	u8		bAUTO_RATE_FALLBACK_CTL = 1;
-	u8		val8;
+	u8 bUNIVERSAL_CONTROL_RL = 0;
+	u8 bUNIVERSAL_CONTROL_AGC = 1;
+	u8 bUNIVERSAL_CONTROL_ANT = 1;
+	u8 bAUTO_RATE_FALLBACK_CTL = 1;
+	u8 val8;
 	write_nic_word(dev, BRSR, 0x0fff);
 	/* Retry limit */
 	val8 = read_nic_byte(dev, CW_CONF);
@@ -907,24 +824,24 @@ HwConfigureRTL8185(
 
 	/* Tx AGC */
 	val8 = read_nic_byte(dev, TXAGC_CTL);
-	if (bUNIVERSAL_CONTROL_AGC)	{
+	if (bUNIVERSAL_CONTROL_AGC) {
 		write_nic_byte(dev, CCK_TXAGC, 128);
 		write_nic_byte(dev, OFDM_TXAGC, 128);
 		val8 = val8 & 0xfe;
-	}	else	{
+	} else {
 		val8 = val8 | 0x01 ;
 	}
 
 
 	write_nic_byte(dev, TXAGC_CTL, val8);
 
-	/* Tx Antenna including Feedback control	*/
+	/* Tx Antenna including Feedback control */
 	val8 = read_nic_byte(dev, TXAGC_CTL);
 
-	if (bUNIVERSAL_CONTROL_ANT)	{
+	if (bUNIVERSAL_CONTROL_ANT) {
 		write_nic_byte(dev, ANTSEL, 0x00);
 		val8 = val8 & 0xfd;
-	}	else	{
+	} else {
 		val8 = val8 & (val8|0x02); /* xiong-2006-11-15 */
 	}
 
@@ -933,7 +850,7 @@ HwConfigureRTL8185(
 	/* Auto Rate fallback control	*/
 	val8 = read_nic_byte(dev, RATE_FALLBACK);
 	val8 &= 0x7c;
-	if (bAUTO_RATE_FALLBACK_CTL)	{
+	if (bAUTO_RATE_FALLBACK_CTL) {
 		val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1;
 
 		/* <RJ_TODO_8185B> We shall set up the ARFR according to user's setting. */
@@ -942,40 +859,34 @@ HwConfigureRTL8185(
 	write_nic_byte(dev, RATE_FALLBACK, val8);
 }
 
-static void
-MacConfig_85BASIC_HardCode(
-	struct net_device *dev)
+static void MacConfig_85BASIC_HardCode(struct net_device *dev)
 {
 	/*
-	============================================================================
-	MACREG.TXT
-	============================================================================
-	*/
-	int			nLinesRead = 0;
-
-	u32	u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
-	int	i;
+	 *==========================================================================
+	 * MACREG.TXT
+	 *==========================================================================
+	 */
+	int nLinesRead = 0;
+	u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
+	int i;
 
 	nLinesRead = sizeof(MAC_REG_TABLE)/2;
 
-	for (i = 0; i < nLinesRead; i++)	{	/* nLinesRead=101 */
+	for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */
 		u4bRegOffset = MAC_REG_TABLE[i][0];
 		u4bRegValue = MAC_REG_TABLE[i][1];
 
 				if (u4bRegOffset == 0x5e)
 					u4bPageIndex = u4bRegValue;
-
 				else
-						u4bRegOffset |= (u4bPageIndex << 8);
+					u4bRegOffset |= (u4bPageIndex << 8);
 
 		write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue);
 	}
 	/* ============================================================================ */
 }
 
-static void
-MacConfig_85BASIC(
-	struct net_device *dev)
+static void MacConfig_85BASIC(struct net_device *dev)
 {
 
 	u8			u1DA;
@@ -994,18 +905,18 @@ MacConfig_85BASIC(
 	PlatformIOWrite4Byte(dev, 0x1F4, 0x00000000);
 	PlatformIOWrite1Byte(dev, 0x1F8, 0x00);
 
-	/* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko.	*/
-	/* power save parameter based on "87SE power save parameters 20071127.doc", as follow.	*/
+	/* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */
+	/* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */
 
 	/* Enable DA10 TX power saving */
 	u1DA = read_nic_byte(dev, PHYPR);
 	write_nic_byte(dev, PHYPR, (u1DA | BIT2));
 
-	/* POWER:	*/
+	/* POWER: */
 	write_nic_word(dev, 0x360, 0x1000);
 	write_nic_word(dev, 0x362, 0x1000);
 
-	/* AFE.		*/
+	/* AFE. */
 	write_nic_word(dev, 0x370, 0x0560);
 	write_nic_word(dev, 0x372, 0x0560);
 	write_nic_word(dev, 0x374, 0x0DA4);
@@ -1013,54 +924,48 @@ MacConfig_85BASIC(
 	write_nic_word(dev, 0x378, 0x0560);
 	write_nic_word(dev, 0x37A, 0x0560);
 	write_nic_word(dev, 0x37C, 0x00EC);
-	write_nic_word(dev, 0x37E, 0x00EC);	/*+edward	*/
+	write_nic_word(dev, 0x37E, 0x00EC); /* +edward */
 	write_nic_byte(dev, 0x24E, 0x01);
 }
 
-u8
-GetSupportedWirelessMode8185(
-	struct net_device *dev
-)
+u8 GetSupportedWirelessMode8185(struct net_device *dev)
 {
-	u8			btSupportedWirelessMode = 0;
+	u8 btSupportedWirelessMode = 0;
 
 	btSupportedWirelessMode = (WIRELESS_MODE_B | WIRELESS_MODE_G);
 	return btSupportedWirelessMode;
 }
 
-void
-ActUpdateChannelAccessSetting(
-	struct net_device *dev,
-	WIRELESS_MODE			WirelessMode,
-	PCHANNEL_ACCESS_SETTING	ChnlAccessSetting
-	)
+void ActUpdateChannelAccessSetting(struct net_device *dev,
+				   WIRELESS_MODE WirelessMode,
+				   PCHANNEL_ACCESS_SETTING ChnlAccessSetting)
 {
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
+	struct		r8180_priv *priv = ieee80211_priv(dev);
+	struct		ieee80211_device *ieee = priv->ieee80211;
 	AC_CODING	eACI;
 	AC_PARAM	AcParam;
-	u8	bFollowLegacySetting = 0;
-	u8   u1bAIFS;
+	u8		bFollowLegacySetting = 0;
+	u8		u1bAIFS;
 
 	/*
-		<RJ_TODO_8185B>
-		TODO: We still don't know how to set up these registers, just follow WMAC to
-		verify 8185B FPAG.
-
-		<RJ_TODO_8185B>
-		Jong said CWmin/CWmax register are not functional in 8185B,
-		so we shall fill channel access realted register into AC parameter registers,
-		even in nQBss.
-	*/
+	 *	<RJ_TODO_8185B>
+	 *	TODO: We still don't know how to set up these registers, just follow WMAC to
+	 *	verify 8185B FPAG.
+	 *
+	 *	<RJ_TODO_8185B>
+	 *	Jong said CWmin/CWmax register are not functional in 8185B,
+	 *	so we shall fill channel access realted register into AC parameter registers,
+	 *	even in nQBss.
+	 */
 	ChnlAccessSetting->SIFS_Timer = 0x22; /* Suggested by Jong, 2005.12.08. */
-	ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko.			*/
-	ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko.			*/
-	ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08.	*/
-	ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko.			*/
-	ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko.			*/
+	ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */
+	ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */
+	ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */
+	ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */
+	ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */
 
 	write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer);
-	write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer);	/* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */
+	write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */
 
 	u1bAIFS = aSifsTime + (2 * ChnlAccessSetting->SlotTimeTimer);
 
@@ -1074,17 +979,17 @@ ActUpdateChannelAccessSetting(
 	}
 
 	/* this setting is copied from rtl8187B.  xiong-2006-11-13 */
-	if (bFollowLegacySetting)	{
+	if (bFollowLegacySetting) {
 
 		/*
-			Follow 802.11 seeting to AC parameter, all AC shall use the same parameter.
-			2005.12.01, by rcnjko.
-		*/
+		 *	Follow 802.11 seeting to AC parameter, all AC shall use the same parameter.
+		 *	2005.12.01, by rcnjko.
+		 */
 		AcParam.longData = 0;
 		AcParam.f.AciAifsn.f.AIFSN = 2; /* Follow 802.11 DIFS.	*/
 		AcParam.f.AciAifsn.f.ACM = 0;
-		AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /*	Follow 802.11 CWmin.	*/
-		AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /*	Follow 802.11 CWmax.	*/
+		AcParam.f.Ecw.f.ECWmin = ChnlAccessSetting->CWminIndex; /* Follow 802.11 CWmin. */
+		AcParam.f.Ecw.f.ECWmax = ChnlAccessSetting->CWmaxIndex; /* Follow 802.11 CWmax. */
 		AcParam.f.TXOPLimit = 0;
 
 		/* lzm reserved 080826 */
@@ -1095,7 +1000,7 @@ ActUpdateChannelAccessSetting(
 		if (ieee->iw_mode == IW_MODE_ADHOC)
 			AcParam.f.TXOPLimit = 0x0020;
 
-		for (eACI = 0; eACI < AC_MAX; eACI++)	{
+		for (eACI = 0; eACI < AC_MAX; eACI++) {
 			AcParam.f.AciAifsn.f.ACI = (u8)eACI;
 			{
 				PAC_PARAM	pAcParam = (PAC_PARAM)(&AcParam);
@@ -1103,7 +1008,7 @@ ActUpdateChannelAccessSetting(
 				u8		u1bAIFS;
 				u32		u4bAcParam;
 
-				/*  Retrive paramters to udpate. */
+				/*  Retrieve paramters to update. */
 				eACI = pAcParam->f.AciAifsn.f.ACI;
 				u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * ChnlAccessSetting->SlotTimeTimer + aSifsTime;
 				u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET)	|
@@ -1111,7 +1016,7 @@ ActUpdateChannelAccessSetting(
 						(((u32)(pAcParam->f.Ecw.f.ECWmin)) << AC_PARAM_ECW_MIN_OFFSET)	|
 						(((u32)u1bAIFS) << AC_PARAM_AIFS_OFFSET));
 
-				switch (eACI)	{
+				switch (eACI) {
 				case AC1_BK:
 					/* write_nic_dword(dev, AC_BK_PARAM, u4bAcParam); */
 					break;
@@ -1133,47 +1038,46 @@ ActUpdateChannelAccessSetting(
 					break;
 				}
 
-				/* Cehck ACM bit.	*/
+				/* Cehck ACM bit. */
 				/* If it is set, immediately set ACM control bit to downgrading AC for passing WMM testplan. Annie, 2005-12-13.	*/
 				{
 					PACI_AIFSN	pAciAifsn = (PACI_AIFSN)(&pAcParam->f.AciAifsn);
 					AC_CODING	eACI = pAciAifsn->f.ACI;
 
-					/*modified Joseph				*/
-					/*for 8187B AsynIORead issue	*/
+					/*for 8187B AsynIORead issue */
 					u8	AcmCtrl = 0;
-					if (pAciAifsn->f.ACM)	{
+					if (pAciAifsn->f.ACM) {
 						/* ACM bit is 1. */
-						switch (eACI)	{
+						switch (eACI) {
 						case AC0_BE:
-							AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN);	/* or 0x21 */
+							AcmCtrl |= (BEQ_ACM_EN|BEQ_ACM_CTL|ACM_HW_EN); /* or 0x21 */
 							break;
 
 						case AC2_VI:
-							AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN);	/* or 0x42	*/
+							AcmCtrl |= (VIQ_ACM_EN|VIQ_ACM_CTL|ACM_HW_EN); /* or 0x42 */
 							break;
 
 						case AC3_VO:
-							AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN);	/* or 0x84 */
+							AcmCtrl |= (VOQ_ACM_EN|VOQ_ACM_CTL|ACM_HW_EN); /* or 0x84 */
 							break;
 
 						default:
 							DMESGW("SetHwReg8185(): [HW_VAR_ACM_CTRL] ACM set failed: eACI is %d\n", eACI);
 							break;
 						}
-					}	else	{
+					} else {
 						/* ACM bit is 0. */
-						switch (eACI)	{
+						switch (eACI) {
 						case AC0_BE:
-							AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN));	/* and 0xDE */
+							AcmCtrl &= ((~BEQ_ACM_EN) & (~BEQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xDE */
 							break;
 
 						case AC2_VI:
-							AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN));	/* and 0xBD */
+							AcmCtrl &= ((~VIQ_ACM_EN) & (~VIQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0xBD */
 							break;
 
 						case AC3_VO:
-							AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN));	/* and 0x7B */
+							AcmCtrl &= ((~VOQ_ACM_EN) & (~VOQ_ACM_CTL) & (~ACM_HW_EN)); /* and 0x7B */
 							break;
 
 						default:
@@ -1187,53 +1091,51 @@ ActUpdateChannelAccessSetting(
 	}
 }
 
-void
-ActSetWirelessMode8185(
-	struct net_device *dev,
-	u8				btWirelessMode
-	)
+void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
 {
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
+	struct  r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	struct  ieee80211_device *ieee = priv->ieee80211;
 	u8	btSupportedWirelessMode = GetSupportedWirelessMode8185(dev);
 
 	if ((btWirelessMode & btSupportedWirelessMode) == 0)	{
-		/* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko.	*/
+		/* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */
 		DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n",
 			btWirelessMode, btSupportedWirelessMode);
 		return;
 	}
 
-	/* 1. Assign wireless mode to swtich if necessary.	*/
-	if (btWirelessMode == WIRELESS_MODE_AUTO)	{
-		if ((btSupportedWirelessMode & WIRELESS_MODE_A))	{
+	/* 1. Assign wireless mode to switch if necessary. */
+	if (btWirelessMode == WIRELESS_MODE_AUTO) {
+		if ((btSupportedWirelessMode & WIRELESS_MODE_A)) {
 			btWirelessMode = WIRELESS_MODE_A;
-		}	else if (btSupportedWirelessMode & WIRELESS_MODE_G)	{
+		} else if (btSupportedWirelessMode & WIRELESS_MODE_G) {
 				btWirelessMode = WIRELESS_MODE_G;
 
-		}	else if ((btSupportedWirelessMode & WIRELESS_MODE_B))	{
-				btWirelessMode = WIRELESS_MODE_B;
-		}	else	{
-				DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n",
-						btSupportedWirelessMode);
+		} else if ((btSupportedWirelessMode & WIRELESS_MODE_B))	{
 				btWirelessMode = WIRELESS_MODE_B;
+		} else {
+			DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n",
+			       btSupportedWirelessMode);
+			btWirelessMode = WIRELESS_MODE_B;
 		}
 	}
 
-	/* 2. Swtich band: RF or BB specific actions,
+	/* 
+ 	 * 2. Swtich band: RF or BB specific actions,
 	 * for example, refresh tables in omc8255, or change initial gain if necessary.
 	 * Nothing to do for Zebra to switch band.
-	 * Update current wireless mode if we swtich to specified band successfully. */
+	 * Update current wireless mode if we switch to specified band successfully. 
+	 */
 
 	ieee->mode = (WIRELESS_MODE)btWirelessMode;
 
-	/* 3. Change related setting.	*/
-	if( ieee->mode == WIRELESS_MODE_A )	{
+	/* 3. Change related setting. */
+	if( ieee->mode == WIRELESS_MODE_A ) {
 		DMESG("WIRELESS_MODE_A\n");
-	}	else if( ieee->mode == WIRELESS_MODE_B )	{
-			DMESG("WIRELESS_MODE_B\n");
-	}	else if( ieee->mode == WIRELESS_MODE_G )	{
-			DMESG("WIRELESS_MODE_G\n");
+	} else if( ieee->mode == WIRELESS_MODE_B ) {
+		DMESG("WIRELESS_MODE_B\n");
+	} else if( ieee->mode == WIRELESS_MODE_G ) {
+		DMESG("WIRELESS_MODE_G\n");
 	}
 	ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting);
 }
@@ -1245,22 +1147,16 @@ void rtl8185b_irq_enable(struct net_device *dev)
 	priv->irq_enabled = 1;
 	write_nic_dword(dev, IMR, priv->IntrMask);
 }
-/* by amy for power save */
-void
-DrvIFIndicateDisassociation(
-	struct net_device *dev,
-	u16			reason
-	)
+
+void DrvIFIndicateDisassociation(struct net_device *dev, u16 reason)
 {
 		/* nothing is needed after disassociation request. */
-	}
-void
-MgntDisconnectIBSS(
-	struct net_device *dev
-)
+}
+
+void MgntDisconnectIBSS(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u8			i;
+	u8 i;
 
 	DrvIFIndicateDisassociation(dev, unspec_reason);
 
@@ -1271,166 +1167,143 @@ MgntDisconnectIBSS(
 
 	priv->ieee80211->state = IEEE80211_NOLINK;
 	/*
-		Stop Beacon.
-
-		Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST
-		Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck.
-		Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send.
-
-		Disable Beacon Queue Own bit, suggested by jong	*/
+	 *	Stop Beacon.
+	 *
+	 *	Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST
+	 *	Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck.
+	 *	Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send.
+	 *
+	 *	Disable Beacon Queue Own bit, suggested by jong	
+	 */
 	ieee80211_stop_send_beacons(priv->ieee80211);
 
 	priv->ieee80211->link_change(dev);
 	notify_wx_assoc_event(priv->ieee80211);
 }
-void
-MlmeDisassociateRequest(
-	struct net_device *dev,
-	u8 *asSta,
-	u8	asRsn
-	)
+
+void MlmeDisassociateRequest(struct net_device *dev, u8 *asSta, u8 asRsn)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	u8 i;
 
 	SendDisassociation(priv->ieee80211, asSta, asRsn);
 
-	if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0)	{
-		/*ShuChen TODO: change media status.			*/
-		/*ShuChen TODO: What to do when disassociate.	*/
+	if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) {
+		/* ShuChen TODO: change media status. */
+		/* ShuChen TODO: What to do when disassociate. */
 		DrvIFIndicateDisassociation(dev, unspec_reason);
 
-
-
 		for (i = 0; i < 6; i++)
 			priv->ieee80211->current_network.bssid[i] = 0x22;
 
 		ieee80211_disassociate(priv->ieee80211);
 	}
-
 }
 
-void
-MgntDisconnectAP(
-	struct net_device *dev,
-	u8			asRsn
-)
+void MgntDisconnectAP(struct net_device *dev, u8 asRsn)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 
 	/*
-	Commented out by rcnjko, 2005.01.27:
-	I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
-
-		2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success
-
-		In WPA WPA2 need to Clear all key ... because new key will set after new handshaking.
-		2004.10.11, by rcnjko. */
+	 * Commented out by rcnjko, 2005.01.27:
+	 * I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
+	 *
+	 *	2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success
+	 *
+	 *	In WPA WPA2 need to Clear all key ... because new key will set after new handshaking.
+	 *	2004.10.11, by rcnjko. 
+	 */
 	MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid, asRsn);
 
 	priv->ieee80211->state = IEEE80211_NOLINK;
 }
-bool
-MgntDisconnect(
-	struct net_device *dev,
-	u8			asRsn
-)
+
+bool MgntDisconnect(struct net_device *dev, u8 asRsn)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	/*
-		Schedule an workitem to wake up for ps mode, 070109, by rcnjko.
-	*/
+	 *	Schedule an workitem to wake up for ps mode, 070109, by rcnjko.
+	 */
 
 	if (IS_DOT11D_ENABLE(priv->ieee80211))
 		Dot11d_Reset(priv->ieee80211);
-	/* In adhoc mode, update beacon frame.	*/
+	/* In adhoc mode, update beacon frame. */
 	if (priv->ieee80211->state == IEEE80211_LINKED)	{
 		if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
 			MgntDisconnectIBSS(dev);
 
-		if (priv->ieee80211->iw_mode == IW_MODE_INFRA)	{
-			/*	We clear key here instead of MgntDisconnectAP() because that
-				MgntActSet_802_11_DISASSOCIATE() is an interface called by OS,
-				e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
-				used to handle disassociation related things to AP, e.g. send Disassoc
-				frame to AP.  2005.01.27, by rcnjko.	*/
+		if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
+			/*
+ 			 * 	We clear key here instead of MgntDisconnectAP() because that
+			 *	MgntActSet_802_11_DISASSOCIATE() is an interface called by OS,
+			 *	e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
+			 *	used to handle disassociation related things to AP, e.g. send Disassoc
+			 *	frame to AP.  2005.01.27, by rcnjko. 
+			 */
 			MgntDisconnectAP(dev, asRsn);
 		}
-		/* Inidicate Disconnect, 2005.02.23, by rcnjko.	*/
+		/* Indicate Disconnect, 2005.02.23, by rcnjko.	*/
 	}
 	return true;
 }
 /*
-	Description:
-		Chang RF Power State.
-		Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE.
-
-	Assumption:
-		PASSIVE LEVEL.
-*/
-bool
-SetRFPowerState(
-	struct net_device *dev,
-	RT_RF_POWER_STATE	eRFPowerState
-	)
+ *	Description:
+ *		Chang RF Power State.
+ *		Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE.
+ *
+ *	Assumption:
+ *		PASSIVE LEVEL.
+ */
+bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
 {
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool			bResult = false;
+	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	bool	bResult = false;
 
 	if (eRFPowerState == priv->eRFPowerState)
 		return bResult;
 
-	 bResult = SetZebraRFPowerState8185(dev, eRFPowerState);
+	bResult = SetZebraRFPowerState8185(dev, eRFPowerState);
 
 	return bResult;
 }
-void
-HalEnableRx8185Dummy(
-	struct net_device *dev
-	)
+
+void HalEnableRx8185Dummy(struct net_device *dev)
 {
 }
-void
-HalDisableRx8185Dummy(
-	struct net_device *dev
-	)
+
+void HalDisableRx8185Dummy(struct net_device *dev)
 {
 }
 
-bool
-MgntActSet_RF_State(
-	struct net_device *dev,
-	RT_RF_POWER_STATE	StateToSet,
-	u32	ChangeSource
-	)
+bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u32 ChangeSource)
 {
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool				bActionAllowed = false;
-	bool				bConnectBySSID = false;
-	RT_RF_POWER_STATE	rtState;
-	u16				RFWaitCounter = 0;
+	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
+	bool	bActionAllowed = false;
+	bool	bConnectBySSID = false;
+	RT_RF_POWER_STATE rtState;
+	u16	RFWaitCounter = 0;
 	unsigned long flag;
 	/*
-		Prevent the race condition of RF state change. By Bruce, 2007-11-28.
-		Only one thread can change the RF state at one time, and others should wait to be executed.
-	*/
-	while (true)	{
+	 *	Prevent the race condition of RF state change. By Bruce, 2007-11-28.
+	 *	Only one thread can change the RF state at one time, and others should wait to be executed.
+	 */
+	while (true) {
 		spin_lock_irqsave(&priv->rf_ps_lock, flag);
-		if (priv->RFChangeInProgress)	{
+		if (priv->RFChangeInProgress) {
 			spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
 			/*  Set RF after the previous action is done.	*/
-			while (priv->RFChangeInProgress)	{
+			while (priv->RFChangeInProgress) {
 				RFWaitCounter++;
 				udelay(1000); /* 1 ms	*/
 
-				/* Wait too long, return FALSE to avoid to be stuck here.	*/
-				if (RFWaitCounter > 1000)	{	/* 1sec	*/
+				/* Wait too long, return FALSE to avoid to be stuck here. */
+				if (RFWaitCounter > 1000) { /* 1sec */
 					printk("MgntActSet_RF_State(): Wait too long to set RF\n");
-					/* TODO: Reset RF state?	*/
+					/* TODO: Reset RF state? */
 					return false;
 				}
 			}
-		}	else	{
+		} else {
 			priv->RFChangeInProgress = true;
 			spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
 			break;
@@ -1438,12 +1311,12 @@ MgntActSet_RF_State(
 	}
 	rtState = priv->eRFPowerState;
 
-	switch (StateToSet)	{
+	switch (StateToSet) {
 	case eRfOn:
 		/*
-			Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or
-			the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02.
-		*/
+		 *	Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or
+		 *	the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02.
+		 */
 		priv->RfOffReason &= (~ChangeSource);
 
 		if (!priv->RfOffReason)	{
@@ -1453,25 +1326,24 @@ MgntActSet_RF_State(
 			if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW && !priv->bInHctTest)
 				bConnectBySSID = true;
 
-		}	else
-				;
+		} else
+			;
 		break;
 
 	case eRfOff:
-		 /* 070125, rcnjko: we always keep connected in AP mode.	*/
-
-			if (priv->RfOffReason > RF_CHANGE_BY_IPS)	{
-				/*
-					060808, Annie:
-					Disconnect to current BSS when radio off. Asked by QuanTa.
-
-					Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
-					because we do NOT need to set ssid to dummy ones.
-				*/
-				MgntDisconnect(dev, disas_lv_ss);
-
-				/* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI.	*/
-			}
+		 /* 070125, rcnjko: we always keep connected in AP mode. */
+
+		if (priv->RfOffReason > RF_CHANGE_BY_IPS) {
+			/*
+			 *	060808, Annie:
+			 *	Disconnect to current BSS when radio off. Asked by QuanTa.
+			 *
+			 *	Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
+			 *	because we do NOT need to set ssid to dummy ones.
+			 */
+			MgntDisconnect(dev, disas_lv_ss);
+			/* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */
+		}
 
 		priv->RfOffReason |= ChangeSource;
 		bActionAllowed = true;
@@ -1484,14 +1356,14 @@ MgntActSet_RF_State(
 		break;
 	}
 
-	if (bActionAllowed)	{
-				/* Config HW to the specified mode.	*/
+	if (bActionAllowed) {
+		/* Config HW to the specified mode. */
 		SetRFPowerState(dev, StateToSet);
 
 		/* Turn on RF.	*/
-		if (StateToSet == eRfOn)		{
+		if (StateToSet == eRfOn) {
 			HalEnableRx8185Dummy(dev);
-			if (bConnectBySSID)	{
+			if (bConnectBySSID) {
 				/* by amy not supported	*/
 			}
 		}
@@ -1507,69 +1379,61 @@ MgntActSet_RF_State(
 	spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
 	return bActionAllowed;
 }
-void
-InactivePowerSave(
-	struct net_device *dev
-	)
+
+void InactivePowerSave(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	/*
-		This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem
-		is really scheduled.
-		The old code, sets this flag before scheduling the IPS workitem and however, at the same time the
-		previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing
-		blocks the IPS procedure of switching RF.
-	*/
+	 *	This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem
+	 *	is really scheduled.
+	 *	The old code, sets this flag before scheduling the IPS workitem and however, at the same time the
+	 *	previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing
+	 *	blocks the IPS procedure of switching RF.
+	 */
 	priv->bSwRfProcessing = true;
 
 	MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS);
 
 	/*
-		To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20.
-	*/
+	 *	To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20.
+	 */
 
 	priv->bSwRfProcessing = false;
 }
 
 /*
-	Description:
-		Enter the inactive power save mode. RF will be off
-*/
-void
-IPSEnter(
-	struct net_device *dev
-	)
+ *	Description:
+ *		Enter the inactive power save mode. RF will be off
+ */
+void IPSEnter(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	RT_RF_POWER_STATE rtState;
-	if (priv->bInactivePs)	{
+	if (priv->bInactivePs) {
 		rtState = priv->eRFPowerState;
 
 		/*
-			Do not enter IPS in the following conditions:
-			(1) RF is already OFF or Sleep
-			(2) bSwRfProcessing (indicates the IPS is still under going)
-			(3) Connectted (only disconnected can trigger IPS)
-			(4) IBSS (send Beacon)
-			(5) AP mode (send Beacon)
-		*/
+		 *	Do not enter IPS in the following conditions:
+		 *	(1) RF is already OFF or Sleep
+		 *	(2) bSwRfProcessing (indicates the IPS is still under going)
+		 *	(3) Connected (only disconnected can trigger IPS)
+		 *	(4) IBSS (send Beacon)
+		 *	(5) AP mode (send Beacon)
+		 */
 		if (rtState == eRfOn && !priv->bSwRfProcessing
-			&& (priv->ieee80211->state != IEEE80211_LINKED))	{
+			&& (priv->ieee80211->state != IEEE80211_LINKED)) {
 			priv->eInactivePowerState = eRfOff;
 			InactivePowerSave(dev);
 		}
 	}
 }
-void
-IPSLeave(
-	struct net_device *dev
-	)
+void IPSLeave(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	RT_RF_POWER_STATE rtState;
-	if (priv->bInactivePs)	{
+	if (priv->bInactivePs) {
 		rtState = priv->eRFPowerState;
-		if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS)	{
+		if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
 			priv->eInactivePowerState = eRfOn;
 			InactivePowerSave(dev);
 		}
@@ -1582,8 +1446,8 @@ void rtl8185b_adapter_start(struct net_device *dev)
 	struct ieee80211_device *ieee = priv->ieee80211;
 
 	u8 SupportedWirelessMode;
-	u8			InitWirelessMode;
-	u8			bInvalidWirelessMode = 0;
+	u8 InitWirelessMode;
+	u8 bInvalidWirelessMode = 0;
 	u8 tmpu8;
 	u8 btCR9346;
 	u8 TmpU1b;
@@ -1598,89 +1462,89 @@ void rtl8185b_adapter_start(struct net_device *dev)
 	HwConfigureRTL8185(dev);
 	write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
 	write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
-	write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3);	/* default network type to 'No	Link'	*/
+	write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */
 	write_nic_word(dev, BcnItv, 100);
 	write_nic_word(dev, AtimWnd, 2);
 	PlatformIOWrite2Byte(dev, FEMR, 0xFFFF);
 	write_nic_byte(dev, WPA_CONFIG, 0);
 	MacConfig_85BASIC(dev);
-	/*	Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko.	*/
-	/*	BT_DEMO_BOARD type	*/
+	/* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */
+	/* BT_DEMO_BOARD type */
 	PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a);
 
 	/*
-	-----------------------------------------------------------------------------
-		Set up PHY related.
-	-----------------------------------------------------------------------------
-	*/
-	/* Enable Config3.PARAM_En to revise AnaaParm.	*/
-	write_nic_byte(dev, CR9346, 0xc0);	/* enable config register write */
+	 *---------------------------------------------------------------------------
+	 *	Set up PHY related.
+	 *---------------------------------------------------------------------------
+	 */
+	/* Enable Config3.PARAM_En to revise AnaaParm. */
+	write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */
 	tmpu8 = read_nic_byte(dev, CONFIG3);
 	write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En));
-	/* Turn on Analog power.	*/
-	/* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko.	*/
+	/* Turn on Analog power. */
+	/* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */
 	write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
 	write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
 	write_nic_word(dev, ANAPARAM3, 0x0010);
 
 	write_nic_byte(dev, CONFIG3, tmpu8);
 	write_nic_byte(dev, CR9346, 0x00);
-	/* enable EEM0 and EEM1 in 9346CR			*/
+	/* enable EEM0 and EEM1 in 9346CR */
 	btCR9346 = read_nic_byte(dev, CR9346);
 	write_nic_byte(dev, CR9346, (btCR9346 | 0xC0));
 
-	/* B cut use LED1 to control HW RF on/off	*/
+	/* B cut use LED1 to control HW RF on/off */
 	TmpU1b = read_nic_byte(dev, CONFIG5);
 	TmpU1b = TmpU1b & ~BIT3;
 	write_nic_byte(dev, CONFIG5, TmpU1b);
 
-	/* disable EEM0 and EEM1 in 9346CR	*/
+	/* disable EEM0 and EEM1 in 9346CR */
 	btCR9346 &= ~(0xC0);
 	write_nic_byte(dev, CR9346, btCR9346);
 
-	/* Enable Led (suggested by Jong)	*/
-	/* B-cut RF Radio on/off  5e[3]=0	*/
+	/* Enable Led (suggested by Jong) */
+	/* B-cut RF Radio on/off  5e[3]=0 */
 	btPSR = read_nic_byte(dev, PSR);
 	write_nic_byte(dev, PSR, (btPSR | BIT3));
-	/* setup initial timing for RFE.	*/
+	/* setup initial timing for RFE. */
 	write_nic_word(dev, RFPinsOutput, 0x0480);
 	SetOutputEnableOfRfPins(dev);
 	write_nic_word(dev, RFPinsSelect, 0x2488);
 
-	/* PHY config.	*/
+	/* PHY config. */
 	PhyConfig8185(dev);
 
 	/*
-		We assume RegWirelessMode has already been initialized before,
-		however, we has to validate the wireless mode here and provide a
-		reasonable initialized value if necessary. 2005.01.13, by rcnjko.
-	*/
+	 *	We assume RegWirelessMode has already been initialized before,
+	 *	however, we has to validate the wireless mode here and provide a
+	 *	reasonable initialized value if necessary. 2005.01.13, by rcnjko.
+	 */
 	SupportedWirelessMode = GetSupportedWirelessMode8185(dev);
 	if ((ieee->mode != WIRELESS_MODE_B) &&
 		(ieee->mode != WIRELESS_MODE_G) &&
 		(ieee->mode != WIRELESS_MODE_A) &&
-		(ieee->mode != WIRELESS_MODE_AUTO))	{
-		/* It should be one of B, G, A, or AUTO.	*/
+		(ieee->mode != WIRELESS_MODE_AUTO)) {
+		/* It should be one of B, G, A, or AUTO. */
 		bInvalidWirelessMode = 1;
-	}	else	{
-	/* One of B, G, A, or AUTO.	*/
-		/* Check if the wireless mode is supported by RF.	*/
+	} else {
+	/* One of B, G, A, or AUTO. */
+		/* Check if the wireless mode is supported by RF. */
 		if	((ieee->mode != WIRELESS_MODE_AUTO) &&
-			(ieee->mode & SupportedWirelessMode) == 0)	{
+			(ieee->mode & SupportedWirelessMode) == 0) {
 			bInvalidWirelessMode = 1;
 		}
 	}
 
-	if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO)	{
-		/* Auto or other invalid value.				*/
-		/* Assigne a wireless mode to initialize.	*/
-		if ((SupportedWirelessMode & WIRELESS_MODE_A))	{
+	if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) {
+		/* Auto or other invalid value. */
+		/* Assigne a wireless mode to initialize. */
+		if ((SupportedWirelessMode & WIRELESS_MODE_A)) {
 			InitWirelessMode = WIRELESS_MODE_A;
-		}	else if ((SupportedWirelessMode & WIRELESS_MODE_G))	{
+		} else if ((SupportedWirelessMode & WIRELESS_MODE_G)) {
 			InitWirelessMode = WIRELESS_MODE_G;
-		}	else if ((SupportedWirelessMode & WIRELESS_MODE_B))	{
+		} else if ((SupportedWirelessMode & WIRELESS_MODE_B)) {
 			InitWirelessMode = WIRELESS_MODE_B;
-		}	else	{
+		} else {
 			DMESGW("InitializeAdapter8185(): No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n",
 				 SupportedWirelessMode);
 			InitWirelessMode = WIRELESS_MODE_B;
@@ -1690,24 +1554,21 @@ void rtl8185b_adapter_start(struct net_device *dev)
 		if (bInvalidWirelessMode)
 			ieee->mode = (WIRELESS_MODE)InitWirelessMode;
 
-	}	else	{
-	/* One of B, G, A.	*/
+	} else {
+	/* One of B, G, A. */
 		InitWirelessMode = ieee->mode;
 	}
-/* by amy for power save	*/
 	priv->eRFPowerState = eRfOff;
 	priv->RfOffReason = 0;
 	{
 		MgntActSet_RF_State(dev, eRfOn, 0);
 	}
 		/*
-			If inactive power mode is enabled, disable rf while in disconnected state.
-		*/
+		 *	If inactive power mode is enabled, disable rf while in disconnected state.
+		 */
 	if (priv->bInactivePs)
 		MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS);
 
-/* by amy for power save	*/
-
 	ActSetWirelessMode8185(dev, (u8)(InitWirelessMode));
 
 	/* ----------------------------------------------------------------------------- */
@@ -1715,7 +1576,7 @@ void rtl8185b_adapter_start(struct net_device *dev)
 	rtl8185b_irq_enable(dev);
 
 	netif_start_queue(dev);
-	}
+}
 
 void rtl8185b_rx_enable(struct net_device *dev)
 {
@@ -1728,7 +1589,7 @@ void rtl8185b_rx_enable(struct net_device *dev)
 		DMESG("NIC in promisc mode");
 
 	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
-	   dev->flags & IFF_PROMISC)	{
+	   dev->flags & IFF_PROMISC) {
 		priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM);
 		priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP;
 	}
diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig
index f87e21101857..4602a47cdb4a 100644
--- a/drivers/staging/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/Kconfig
@@ -14,6 +14,7 @@ if RTLLIB
 config RTLLIB_CRYPTO_CCMP
 	tristate "Support for rtllib CCMP crypto"
 	depends on RTLLIB
+	select CRYPTO_AES
 	default y
 	---help---
 	  CCMP crypto driver for rtllib.
@@ -23,6 +24,8 @@ config RTLLIB_CRYPTO_CCMP
 config RTLLIB_CRYPTO_TKIP
 	tristate "Support for rtllib TKIP crypto"
 	depends on RTLLIB
+	select CRYPTO_ARC4
+	select CRYPTO_MICHAEL_MIC
 	default y
 	---help---
 	  TKIP crypto driver for rtllib.
@@ -31,6 +34,7 @@ config RTLLIB_CRYPTO_TKIP
 
 config RTLLIB_CRYPTO_WEP
 	tristate "Support for rtllib WEP crypto"
+	select CRYPTO_ARC4
 	depends on RTLLIB
 	default y
 	---help---
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c
index 58d044ea5524..ea91744f7ccf 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c
@@ -342,7 +342,6 @@ static	void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
 u32 cmpk_message_handle_rx(struct net_device *dev,
 			   struct rtllib_rx_stats *pstats)
 {
-	struct r8192_priv *priv = rtllib_priv(dev);
 	int			total_length;
 	u8			cmd_length, exe_cnt = 0;
 	u8			element_id;
@@ -409,8 +408,6 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
 			return 1;
 		}
 
-		priv->stats.rxcmdpkt[element_id]++;
-
 		total_length -= cmd_length;
 		pcmd_buff    += cmd_length;
 	}
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
index 37719859bdae..b526fa428679 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c
@@ -216,7 +216,7 @@ static bool firmware_check_ready(struct net_device *dev,
 		break;
 	default:
 		rt_status = false;
-		RT_TRACE(COMP_FIRMWARE, "Unknown firware status");
+		RT_TRACE(COMP_FIRMWARE, "Unknown firmware status");
 		break;
 	}
 
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
index 3e705efaaf22..9676c591c859 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c
@@ -689,7 +689,7 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel)
 	case RF_8258:
 		break;
 	default:
-		RT_TRACE(COMP_ERR, "unknown rf chip in funtion %s()\n",
+		RT_TRACE(COMP_ERR, "unknown rf chip in function %s()\n",
 			 __func__);
 		break;
 	}
diff --git a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
index d5de279f6644..970298b07af7 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
+++ b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
@@ -306,7 +306,7 @@
 #define bRFStart                  	0x0000f000
 #define bBBStart                  	0x000000f0
 #define bBBCCKStart               	0x0000000f
-/* Reg)x814 */
+/* Reg x814 */
 #define bPAEnd                    	0xf
 #define bTREnd                    	0x0f000000
 #define bRFEnd                    	0x000f0000
@@ -844,7 +844,7 @@
 #define bRTL8258_RxLPFBW          0xc00
 #define bRTL8258_RSSILPFBW        0xc0
 
-/* byte endable for sb_write */
+/* byte enable for sb_write */
 #define bByte0                    0x1
 #define bByte1                    0x2
 #define bByte2                    0x4
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index 71adb6b3344d..4f602b227b50 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -1025,7 +1025,7 @@ static int rtl8192_sta_down(struct net_device *dev, bool shutdownrf)
 			break;
 		}
 		RT_TRACE(COMP_DBG, "===>%s():RF is in progress, need to wait "
-			 "until rf chang is done.\n", __func__);
+			 "until rf change is done.\n", __func__);
 		mdelay(1);
 		RFInProgressTimeOut++;
 		spin_lock_irqsave(&priv->rf_ps_lock, flags);
@@ -1211,7 +1211,7 @@ static void rtl8192_init_priv_variable(struct net_device *dev)
 	priv->AcmControl = 0;
 	priv->pFirmware = vzalloc(sizeof(struct rt_firmware));
 	if (!priv->pFirmware)
-		printk(KERN_ERR "rtl8193e: Unable to allocate space "
+		printk(KERN_ERR "rtl8192e: Unable to allocate space "
 		       "for firmware\n");
 
 	skb_queue_head_init(&priv->rx_queue);
@@ -2024,10 +2024,10 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 	stype = WLAN_FC_GET_STYPE(fc);
 	pda_addr = header->addr1;
 
-	if (is_multicast_ether_addr(pda_addr))
-		multi_addr = true;
-	else if (is_broadcast_ether_addr(pda_addr))
+	if (is_broadcast_ether_addr(pda_addr))
 		broad_addr = true;
+	else if (is_multicast_ether_addr(pda_addr))
+		multi_addr = true;
 	else
 		uni_addr = true;
 
@@ -2358,8 +2358,7 @@ static void rtl8192_rx_normal(struct net_device *dev)
 				stats.RxBufShift);
 			skb_trim(skb, skb->len - 4/*sCrcLng*/);
 			rtllib_hdr = (struct rtllib_hdr_1addr *)skb->data;
-			if (!is_broadcast_ether_addr(rtllib_hdr->addr1) &&
-			!is_multicast_ether_addr(rtllib_hdr->addr1)) {
+			if (!is_multicast_ether_addr(rtllib_hdr->addr1)) {
 				/* unicast packet */
 				unicast_packet = true;
 			}
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
index 2a2519cc284d..320d5fc026b4 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
@@ -353,7 +353,6 @@ struct rt_stats {
 	unsigned long rxrdu;
 	unsigned long rxok;
 	unsigned long rxframgment;
-	unsigned long rxcmdpkt[8];
 	unsigned long rxurberr;
 	unsigned long rxstaterr;
 	unsigned long rxdatacrcerr;
@@ -944,7 +943,7 @@ struct r8192_priv {
 	bool		bfsync_processing;
 	u32		rate_record;
 	u32		rateCountDiffRecord;
-	u32		ContiuneDiffCount;
+	u32		ContinueDiffCount;
 	bool		bswitch_fsync;
 	u8		framesync;
 	u32		framesyncC34;
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
index f026b7171f62..481b1e4d4913 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
@@ -493,7 +493,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
 
 				if (priv->bResetInProgress) {
 					RT_TRACE(COMP_POWER_TRACKING,
-						 "we are in slient reset progress, so return\n");
+						 "we are in silent reset progress, so return\n");
 					write_nic_byte(dev, Pw_Track_Flag, 0);
 					write_nic_byte(dev, FW_Busy_Flag, 0);
 					return;
@@ -2615,22 +2615,22 @@ void dm_fsync_timer_callback(unsigned long data)
 				      rate_count_diff;
 			if (DiffNum >=
 			    priv->rtllib->fsync_seconddiff_ratethreshold)
-				priv->ContiuneDiffCount++;
+				priv->ContinueDiffCount++;
 			else
-				priv->ContiuneDiffCount = 0;
+				priv->ContinueDiffCount = 0;
 
-			if (priv->ContiuneDiffCount >= 2) {
+			if (priv->ContinueDiffCount >= 2) {
 				bSwitchFromCountDiff = true;
-				priv->ContiuneDiffCount = 0;
+				priv->ContinueDiffCount = 0;
 			}
 		} else {
-			priv->ContiuneDiffCount = 0;
+			priv->ContinueDiffCount = 0;
 		}
 
 		if (rate_count_diff <=
 		    priv->rtllib->fsync_firstdiff_ratethreshold) {
 			bSwitchFromCountDiff = true;
-			priv->ContiuneDiffCount = 0;
+			priv->ContinueDiffCount = 0;
 		}
 		priv->rate_record = rate_count;
 		priv->rateCountDiffRecord = rate_count_diff;
@@ -2677,10 +2677,10 @@ void dm_fsync_timer_callback(unsigned long data)
 			write_nic_byte(dev, 0xC36, 0x5c);
 			write_nic_byte(dev, 0xC3e, 0x96);
 		}
-		priv->ContiuneDiffCount = 0;
+		priv->ContinueDiffCount = 0;
 		write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
 	}
-	RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount);
+	RT_TRACE(COMP_HALDM, "ContinueDiffCount %d\n", priv->ContinueDiffCount);
 	RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d "
 		 "bSwitchFsync %d\n", priv->rate_record, rate_count,
 		 rate_count_diff, priv->bswitch_fsync);
@@ -2723,7 +2723,7 @@ static void dm_EndSWFsync(struct net_device *dev)
 		write_nic_byte(dev, 0xC3e, 0x96);
 	}
 
-	priv->ContiuneDiffCount = 0;
+	priv->ContinueDiffCount = 0;
 	write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
 }
 
@@ -2735,7 +2735,7 @@ static void dm_StartSWFsync(struct net_device *dev)
 
 	RT_TRACE(COMP_HALDM, "%s\n", __func__);
 	priv->rate_record = 0;
-	priv->ContiuneDiffCount = 0;
+	priv->ContinueDiffCount = 0;
 	priv->rateCountDiffRecord = 0;
 	priv->bswitch_fsync  = false;
 
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c b/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c
index 4e93669210af..778d7baf8e08 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_wx.c
@@ -1322,9 +1322,9 @@ static struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
 
 struct iw_handler_def  r8192_wx_handlers_def = {
 	.standard = r8192_wx_handlers,
-	.num_standard = sizeof(r8192_wx_handlers) / sizeof(iw_handler),
+	.num_standard = ARRAY_SIZE(r8192_wx_handlers),
 	.private = r8192_private_handler,
-	.num_private = sizeof(r8192_private_handler) / sizeof(iw_handler),
+	.num_private = ARRAY_SIZE(r8192_private_handler),
 	.num_private_args = sizeof(r8192_private_args) /
 			    sizeof(struct iw_priv_args),
 	.get_wireless_stats = r8192_get_wireless_stats,
diff --git a/drivers/staging/rtl8192e/rtl819x_TSProc.c b/drivers/staging/rtl8192e/rtl819x_TSProc.c
index 711a096be7a7..658e875232aa 100644
--- a/drivers/staging/rtl8192e/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192e/rtl819x_TSProc.c
@@ -310,7 +310,7 @@ bool GetTs(struct rtllib_device *ieee, struct ts_common_info **ppTS,
 	   u8 *Addr, u8 TID, enum tr_select TxRxSelect, bool bAddNewTs)
 {
 	u8	UP = 0;
-	if (is_broadcast_ether_addr(Addr) || is_multicast_ether_addr(Addr)) {
+	if (is_multicast_ether_addr(Addr)) {
 		RTLLIB_DEBUG(RTLLIB_DL_ERR, "ERR! get TS for Broadcast or "
 			     "Multicast\n");
 		return false;
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index e26aec86a5c8..d7460ae3a765 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -169,7 +169,7 @@ struct cb_desc {
 
 	u8 nStuckCount;
 
-	/* Tx Firmware Relaged flags (10-11)*/
+	/* Tx Firmware Related flags (10-11)*/
 	u8 bCTSEnable:1;
 	u8 bRTSEnable:1;
 	u8 bUseShortGI:1;
@@ -1690,7 +1690,7 @@ enum rtllib_state {
 	/* the association procedure is sending AUTH request*/
 	RTLLIB_ASSOCIATING_AUTHENTICATING,
 
-	/* the association procedure has successfully authentcated
+	/* the association procedure has successfully authenticated
 	 * and is sending association request
 	 */
 	RTLLIB_ASSOCIATING_AUTHENTICATED,
@@ -2409,7 +2409,7 @@ struct rtllib_device {
 
 	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
 	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
-	 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
+	 * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
 	 * then also management frames are sent via this callback.
 	 * This function can't sleep.
 	 */
@@ -2422,12 +2422,12 @@ struct rtllib_device {
 	 */
 	void (*data_hard_stop)(struct net_device *dev);
 
-	/* OK this is complementar to data_poll_hard_stop */
+	/* OK this is complementing to data_poll_hard_stop */
 	void (*data_hard_resume)(struct net_device *dev);
 
 	/* ask to the driver to retune the radio .
 	 * This function can sleep. the driver should ensure
-	 * the radio has been swithced before return.
+	 * the radio has been switched before return.
 	 */
 	void (*set_chan)(struct net_device *dev, short ch);
 
@@ -2438,7 +2438,7 @@ struct rtllib_device {
 	 * The syncro version is similar to the start_scan but
 	 * does not return until all channels has been scanned.
 	 * this is called in user context and should sleep,
-	 * it is called in a work_queue when swithcing to ad-hoc mode
+	 * it is called in a work_queue when switching to ad-hoc mode
 	 * or in behalf of iwlist scan when the card is associated
 	 * and root user ask for a scan.
 	 * the fucntion stop_scan should stop both the syncro and
@@ -2481,7 +2481,7 @@ struct rtllib_device {
 				     struct rtllib_network *network);
 
 
-	/* check whether Tx hw resouce available */
+	/* check whether Tx hw resource available */
 	short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
 	short (*get_nic_desc_num)(struct net_device *dev, int queue_index);
 	void (*SetBWModeHandler)(struct net_device *dev,
@@ -2543,10 +2543,10 @@ struct rtllib_device {
 /* Generate probe requests */
 #define IEEE_SOFTMAC_PROBERQ (1<<4)
 
-/* Generate respones to probe requests */
+/* Generate response to probe requests */
 #define IEEE_SOFTMAC_PROBERS (1<<5)
 
-/* The ieee802.11 stack will manages the netif queue
+/* The ieee802.11 stack will manage the netif queue
  * wake/stop for the driver, taking care of 802.11
  * fragmentation. See softmac.c for details. */
 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index 13979b5ea32a..8b8a5c661a26 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -496,7 +496,7 @@ void rtllib_indicate_packets(struct rtllib_device *ieee, struct rtllib_rxb **prx
 				memcpy(skb_push(sub_skb, ETH_ALEN), prxb->dst, ETH_ALEN);
 			}
 
-			/* Indicat the packets to upper layer */
+			/* Indicate the packets to upper layer */
 			if (sub_skb) {
 				stats->rx_packets++;
 				stats->rx_bytes += sub_skb->len;
@@ -1000,7 +1000,7 @@ static int rtllib_rx_data_filter(struct rtllib_device *ieee, u16 fc,
 			return -1;
 
 		/* {broad,multi}cast packets to our BSS go through */
-		if (is_multicast_ether_addr(dst) || is_broadcast_ether_addr(dst)) {
+		if (is_multicast_ether_addr(dst)) {
 			if (memcmp(bssid, ieee->current_network.bssid, ETH_ALEN))
 				return -1;
 		}
@@ -1233,7 +1233,7 @@ static void rtllib_rx_indicate_pkt_legacy(struct rtllib_device *ieee,
 			if (is_multicast_ether_addr(dst))
 				ieee->stats.multicast++;
 
-			/* Indicat the packets to upper layer */
+			/* Indicate the packets to upper layer */
 			memset(sub_skb->cb, 0, sizeof(sub_skb->cb));
 			sub_skb->protocol = eth_type_trans(sub_skb, dev);
 			sub_skb->dev = dev;
@@ -1269,7 +1269,7 @@ static int rtllib_rx_InfraAdhoc(struct rtllib_device *ieee, struct sk_buff *skb,
 	sc = le16_to_cpu(hdr->seq_ctl);
 
 	/*Filter pkt not to me*/
-	multicast = is_multicast_ether_addr(hdr->addr1)|is_broadcast_ether_addr(hdr->addr1);
+	multicast = is_multicast_ether_addr(hdr->addr1);
 	unicast = !multicast;
 	if (unicast && (compare_ether_addr(dev->dev_addr, hdr->addr1) != 0)) {
 		if (ieee->bNetPromiscuousMode)
@@ -1350,7 +1350,7 @@ static int rtllib_rx_InfraAdhoc(struct rtllib_device *ieee, struct sk_buff *skb,
 	/* Get TS for Rx Reorder  */
 	hdr = (struct rtllib_hdr_4addr *) skb->data;
 	if (ieee->current_network.qos_data.active && IsQoSDataFrame(skb->data)
-		&& !is_multicast_ether_addr(hdr->addr1) && !is_broadcast_ether_addr(hdr->addr1)
+		&& !is_multicast_ether_addr(hdr->addr1)
 		&& (!bToOtherSTA)) {
 		TID = Frame_QoSTID(skb->data);
 		SeqNum = WLAN_GET_SEQ_SEQ(sc);
diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c
index c5a15dba1bf5..a21b4d91a596 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac.c
@@ -31,7 +31,7 @@ short rtllib_is_shortslot(const struct rtllib_network *net)
 	return net->capability & WLAN_CAPABILITY_SHORT_SLOT_TIME;
 }
 
-/* returns the total length needed for pleacing the RATE MFIE
+/* returns the total length needed for placing the RATE MFIE
  * tag and the EXTENDED RATE MFIE tag if needed.
  * It encludes two bytes per tag for the tag itself and its len
  */
@@ -49,7 +49,7 @@ static unsigned int rtllib_MFIE_rate_len(struct rtllib_device *ieee)
 	return rate_len;
 }
 
-/* pleace the MFIE rate, tag to the memory (double) poined.
+/* place the MFIE rate, tag to the memory (double) pointed.
  * Then it updates the pointer so that
  * it points after the new MFIE tag added.
  */
@@ -557,7 +557,7 @@ void rtllib_softmac_scan_syncro(struct rtllib_device *ieee, u8 is_mesh)
 		 *    new network events, despite for updating the net list,
 		 *    but we are temporarly 'unlinked' as the driver shall
 		 *    not filter RX frames and the channel is changing.
-		 * So the only situation in witch are interested is to check
+		 * So the only situation in which are interested is to check
 		 * if the state become LINKED because of the #1 situation
 		 */
 
@@ -1681,7 +1681,7 @@ inline void rtllib_softmac_new_net(struct rtllib_device *ieee,
 
 		/* if the user set the AP check if match.
 		 * if the network does not broadcast essid we check the
-		 *	 user supplyed ANY essid
+		 *	 user supplied ANY essid
 		 * if the network does broadcast and the user does not set
 		 *	 essid it is OK
 		 * if the network does broadcast and the user did set essid
@@ -2444,16 +2444,16 @@ inline int rtllib_rx_frame_softmac(struct rtllib_device *ieee,
 
 /* following are for a simplier TX queue management.
  * Instead of using netif_[stop/wake]_queue the driver
- * will uses these two function (plus a reset one), that
- * will internally uses the kernel netif_* and takes
+ * will use these two functions (plus a reset one), that
+ * will internally use the kernel netif_* and takes
  * care of the ieee802.11 fragmentation.
  * So the driver receives a fragment per time and might
- * call the stop function when it want without take care
- * to have enought room to TX an entire packet.
- * This might be useful if each fragment need it's own
+ * call the stop function when it wants to not
+ * have enough room to TX an entire packet.
+ * This might be useful if each fragment needs it's own
  * descriptor, thus just keep a total free memory > than
- * the max fragmentation treshold is not enought.. If the
- * ieee802.11 stack passed a TXB struct then you needed
+ * the max fragmentation threshold is not enough.. If the
+ * ieee802.11 stack passed a TXB struct then you need
  * to keep N free descriptors where
  * N = MAX_PACKET_SIZE / MIN_FRAG_TRESHOLD
  * In this way you need just one and the 802.11 stack
@@ -2696,15 +2696,15 @@ static void rtllib_start_ibss_wq(void *data)
 	rtllib_softmac_check_all_nets(ieee);
 
 
-	/* if not then the state is not linked. Maybe the user swithced to
+	/* if not then the state is not linked. Maybe the user switched to
 	 * ad-hoc mode just after being in monitor mode, or just after
 	 * being very few time in managed mode (so the card have had no
 	 * time to scan all the chans..) or we have just run up the iface
 	 * after setting ad-hoc mode. So we have to give another try..
 	 * Here, in ibss mode, should be safe to do this without extra care
-	 * (in bss mode we had to make sure no-one tryed to associate when
+	 * (in bss mode we had to make sure no-one tried to associate when
 	 * we had just checked the ieee->state and we was going to start the
-	 * scan) beacause in ibss mode the rtllib_new_net function, when
+	 * scan) because in ibss mode the rtllib_new_net function, when
 	 * finds a good net, just set the ieee->state to RTLLIB_LINKED,
 	 * so, at worst, we waste a bit of time to initiate an unneeded syncro
 	 * scan, that will stop at the first round because it sees the state
@@ -2819,7 +2819,7 @@ void rtllib_start_bss(struct rtllib_device *ieee)
 
 	/* ensure no-one start an associating process (thus setting
 	 * the ieee->state to rtllib_ASSOCIATING) while we
-	 * have just cheked it and we are going to enable scan.
+	 * have just checked it and we are going to enable scan.
 	 * The rtllib_new_net function is always called with
 	 * lock held (from both rtllib_softmac_check_all_nets and
 	 * the rx path), so we cannot be in the middle of such function
@@ -2872,7 +2872,7 @@ static void rtllib_associate_retry_wq(void *data)
 
 	/* until we do not set the state to RTLLIB_NOLINK
 	* there are no possibility to have someone else trying
-	* to start an association procdure (we get here with
+	* to start an association procedure (we get here with
 	* ieee->state = RTLLIB_ASSOCIATING).
 	* When we set the state to RTLLIB_NOLINK it is possible
 	* that the RX path run an attempt to associate, but
@@ -3679,8 +3679,7 @@ void rtllib_MlmeDisassociateRequest(struct rtllib_device *rtllib, u8 *asSta,
 
 	RemovePeerTS(rtllib, asSta);
 
-
-	if (memcpy(rtllib->current_network.bssid, asSta, 6) == NULL) {
+	if (memcmp(rtllib->current_network.bssid, asSta, 6) == 0) {
 		rtllib->state = RTLLIB_NOLINK;
 
 		for (i = 0; i < 6; i++)
diff --git a/drivers/staging/rtl8192e/rtllib_softmac_wx.c b/drivers/staging/rtl8192e/rtllib_softmac_wx.c
index 1523bc7a2105..1bb6b52e0f24 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac_wx.c
@@ -479,7 +479,7 @@ int rtllib_wx_set_essid(struct rtllib_device *ieee,
 
 
 	/* this is just to be sure that the GET wx callback
-	 * has consisten infos. not needed otherwise
+	 * has consistent infos. not needed otherwise
 	 */
 	spin_lock_irqsave(&ieee->lock, flags);
 
@@ -575,7 +575,7 @@ int rtllib_wx_set_power(struct rtllib_device *ieee,
 	if ((!ieee->sta_wake_up) ||
 	    (!ieee->enter_sleep_state) ||
 	    (!ieee->ps_is_queue_empty)) {
-		RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tryied to be use "
+		RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tried to be use "
 			     "but driver missed a callback\n\n", __func__);
 		return -1;
 	}
diff --git a/drivers/staging/rtl8192e/rtllib_tx.c b/drivers/staging/rtl8192e/rtllib_tx.c
index f451bfc27a86..42900ee4825b 100644
--- a/drivers/staging/rtl8192e/rtllib_tx.c
+++ b/drivers/staging/rtl8192e/rtllib_tx.c
@@ -59,7 +59,7 @@
 802.11 Data Frame
 
 
-802.11 frame_contorl for data frames - 2 bytes
+802.11 frame_control for data frames - 2 bytes
      ,-----------------------------------------------------------------------------------------.
 bits | 0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  a  |  b  |  c  |  d  |  e   |
      |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
@@ -296,8 +296,7 @@ static void rtllib_tx_query_agg_cap(struct rtllib_device *ieee,
 		return;
 	if (!IsQoSDataFrame(skb->data))
 		return;
-	if (is_multicast_ether_addr(hdr->addr1) ||
-	    is_broadcast_ether_addr(hdr->addr1))
+	if (is_multicast_ether_addr(hdr->addr1))
 		return;
 
 	if (tcb_desc->bdhcp || ieee->CntAfterLink < 2)
@@ -515,7 +514,7 @@ u16 rtllib_query_seqnum(struct rtllib_device *ieee, struct sk_buff *skb,
 {
 	u16 seqnum = 0;
 
-	if (is_multicast_ether_addr(dst) || is_broadcast_ether_addr(dst))
+	if (is_multicast_ether_addr(dst))
 		return 0;
 	if (IsQoSDataFrame(skb->data)) {
 		struct tx_ts_record *pTS = NULL;
@@ -576,7 +575,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
 
 	spin_lock_irqsave(&ieee->lock, flags);
 
-	/* If there is no driver handler to take the TXB, dont' bother
+	/* If there is no driver handler to take the TXB, don't bother
 	 * creating it... */
 	if ((!ieee->hard_start_xmit && !(ieee->softmac_features &
 	   IEEE_SOFTMAC_TX_QUEUE)) ||
@@ -698,8 +697,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
 			       ETH_ALEN);
 		}
 
-		bIsMulticast = is_broadcast_ether_addr(header.addr1) ||
-			       is_multicast_ether_addr(header.addr1);
+		bIsMulticast = is_multicast_ether_addr(header.addr1);
 
 		header.frame_ctl = cpu_to_le16(fc);
 
@@ -738,7 +736,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
 		   (CFG_RTLLIB_COMPUTE_FCS | CFG_RTLLIB_RESERVE_FCS))
 			bytes_per_frag -= RTLLIB_FCS_LEN;
 
-		/* Each fragment may need to have room for encryptiong
+		/* Each fragment may need to have room for encrypting
 		 * pre/postfix */
 		if (encrypt) {
 			bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
diff --git a/drivers/staging/rtl8192e/rtllib_wx.c b/drivers/staging/rtl8192e/rtllib_wx.c
index c27ff7edbaf2..c7e8d4d8ec2b 100644
--- a/drivers/staging/rtl8192e/rtllib_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_wx.c
@@ -88,7 +88,7 @@ static inline char *rtl819x_translate_scan(struct rtllib_device *ieee,
 	}
 	/* Add the protocol name */
 	iwe.cmd = SIOCGIWNAME;
-	for (i = 0; i < (sizeof(rtllib_modes)/sizeof(rtllib_modes[0])); i++) {
+	for (i = 0; i < ARRAY_SIZE(rtllib_modes); i++) {
 		if (network->mode&(1<<i)) {
 			sprintf(pname, rtllib_modes[i].mode_string,
 				rtllib_modes[i].mode_size);
@@ -408,7 +408,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
 				       (*crypt)->priv);
 		sec.flags |= (1 << key);
 		/* This ensures a key will be activated if no key is
-		 * explicitely set */
+		 * explicitly set */
 		if (key == sec.active_key)
 			sec.flags |= SEC_ACTIVE_KEY;
 		ieee->crypt_info.tx_keyidx = key;
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
index e3d47bcf4cab..82d4bf6a86a5 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
@@ -161,7 +161,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 	if (ieee->pHTInfo == NULL)
 	{
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc memory for HTInfo\n");
-		return NULL;
+		goto failed;
 	}
 	HTUpdateDefaultSetting(ieee);
 	HTInitializeHTInfo(ieee); //may move to other place.
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index be2a28cf8edd..e3cf7a45b900 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -671,7 +671,7 @@ void RxReorderIndicatePacket( struct ieee80211_device *ieee,
 		index = 1;
 	} else {
 		/* Current packet is going to be inserted into pending list.*/
-		//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to orderd list\n",__FUNCTION__);
+		//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to ordered list\n",__FUNCTION__);
 		if(!list_empty(&ieee->RxReorder_Unused_List)) {
 			pReorderEntry = (PRX_REORDER_ENTRY)list_entry(ieee->RxReorder_Unused_List.next,RX_REORDER_ENTRY,List);
 			list_del_init(&pReorderEntry->List);
@@ -1285,7 +1285,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 */
 //added by amy for reorder
 	if(ieee->current_network.qos_data.active && IsQoSDataFrame(skb->data)
-		&& !is_multicast_ether_addr(hdr->addr1) && !is_broadcast_ether_addr(hdr->addr1))
+		&& !is_multicast_ether_addr(hdr->addr1))
 	{
 		TID = Frame_QoSTID(skb->data);
 		SeqNum = WLAN_GET_SEQ_SEQ(sc);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index c2ab5fa15465..f6ff8cff313a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -2062,7 +2062,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 							}
 						}else{
 							ieee->softmac_stats.rx_auth_rs_err++;
-							IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode);
+							IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode);
 							ieee80211_associate_abort(ieee);
 						}
 
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index 59c45a510efb..3f5ceeb88b6c 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -314,7 +314,7 @@ void ieee80211_tx_query_agg_cap(struct ieee80211_device* ieee, struct sk_buff* s
 	if (!IsQoSDataFrame(skb->data))
 		return;
 
-	if (is_multicast_ether_addr(hdr->addr1) || is_broadcast_ether_addr(hdr->addr1))
+	if (is_multicast_ether_addr(hdr->addr1))
 		return;
 	//check packet and mode later
 #ifdef TO_DO_LIST
@@ -575,7 +575,7 @@ void ieee80211_txrate_selectmode(struct ieee80211_device* ieee, cb_desc* tcb_des
 
 void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u8* dst)
 {
-	if (is_multicast_ether_addr(dst) || is_broadcast_ether_addr(dst))
+	if (is_multicast_ether_addr(dst))
 		return;
 	if (IsQoSDataFrame(skb->data)) //we deal qos data only
 	{
@@ -693,8 +693,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
 
 		/* Determine fragmentation size based on destination (multicast
 		* and broadcast are not fragmented) */
-		if (is_multicast_ether_addr(header.addr1) ||
-		is_broadcast_ether_addr(header.addr1)) {
+		if (is_multicast_ether_addr(header.addr1)) {
 			frag_size = MAX_FRAG_THRESHOLD;
 			qos_ctl |= QOS_CTL_NOTCONTAIN_ACK;
 		}
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
index 957ce4ef48b5..06a9824bbff1 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
@@ -350,7 +350,7 @@ bool GetTs(
 	// We do not build any TS for Broadcast or Multicast stream.
 	// So reject these kinds of search here.
 	//
-	if(is_broadcast_ether_addr(Addr) || is_multicast_ether_addr(Addr))
+	if (is_multicast_ether_addr(Addr))
 	{
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "get TS for Broadcast or Multicast\n");
 		return false;
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
index 8878cfeb0fbb..3c515b7bc542 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -14,7 +14,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thank the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.h b/drivers/staging/rtl8192u/r8180_93cx6.h
index fb3ac9766ea5..5cea51e1142e 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.h
+++ b/drivers/staging/rtl8192u/r8180_93cx6.h
@@ -7,7 +7,7 @@
 	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
 	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+	We want to thank the Authors of such projects and the Ndiswrapper project Authors.
 */
 
 /*This files contains card eeprom (93c46 or 93c56) programming routines*/
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index 9b81f26d40fe..57e3383cc935 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -11,7 +11,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thank the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
@@ -98,7 +98,7 @@ do { if(rt_global_debug_component & component) \
 #define COMP_INIT				BIT2		// during driver initialization / halt / reset.
 
 
-#define COMP_RECV				BIT3		// Reveive part data path.
+#define COMP_RECV				BIT3		// Receive data path.
 #define COMP_SEND				BIT4		// Send part path.
 #define COMP_IO					BIT5		// I/O Related. Added by Annie, 2006-03-02.
 #define COMP_POWER				BIT6		// 802.11 Power Save mode or System/Device Power state related.
@@ -322,7 +322,7 @@ typedef struct _tx_fwinfo_819x_usb {
         u8		TxSubCarrier:2;         // This is used for legacy OFDM rate only.
         u8		STBC:2;
         u8		AllowAggregation:1;
-        u8		RtsHT:1;                //Interpre RtsRate field as high throughput data rate
+        u8		RtsHT:1;                //Interpret RtsRate field as high throughput data rate
         u8		RtsShort:1;             //Short PLCP for CCK, or short GI for 11n MCS
         u8		RtsBandwidth:1;         // This is used for HT MCS rate only.
         u8		RtsSubcarrier:2;        // This is used for legacy OFDM rate only.
@@ -610,7 +610,6 @@ typedef struct Stats
 //	unsigned long rxnopointer;
 	unsigned long rxok;
 	unsigned long rxframgment;
-	unsigned long rxcmdpkt[4];		//08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query
 	unsigned long rxurberr;
 	unsigned long rxstaterr;
 	unsigned long received_rate_histogram[4][32];	//0: Total, 1:OK, 2:CRC, 3:ICV, 2007 07 03 cosa
@@ -1117,7 +1116,7 @@ typedef struct r8192_priv
 	bool bfsync_processing;	// 500ms Fsync timer is active or not
 	u32 	rate_record;
 	u32 	rateCountDiffRecord;
-	u32	ContiuneDiffCount;
+	u32	ContinueDiffCount;
 	bool bswitch_fsync;
 
 	u8	framesync;
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 9c00865f302a..5981d6658320 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -203,7 +203,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
 		{
 			Dot11d_Init(ieee);
 			ieee->bGlobalDomain = false;
-			//acturally 8225 & 8256 rf chip only support B,G,24N mode
+			//actually 8225 & 8256 rf chips only support B,G,24N mode
 			if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256))
 			{
 				min_chan = 1;
@@ -1103,7 +1103,7 @@ inline u16 rtl8192_rate2rate(short rate)
 }
 
 
-/* The protype of rx_isr has changed since one verion of Linux Kernel */
+/* The prototype of rx_isr has changed since one version of Linux Kernel */
 static void rtl8192_rx_isr(struct urb *urb)
 {
 	struct sk_buff *skb = (struct sk_buff *) urb->context;
@@ -1476,7 +1476,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
 	if(tcb_desc->queue_index != TXCMD_QUEUE) {
 		if(tx_urb->status == 0) {
 			dev->trans_start = jiffies;
-			// As act as station mode, destion shall be  unicast address.
+			// Act as station mode, destination shall be unicast address.
 			//priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
 			//priv->ieee80211->stats.tx_packets++;
 			priv->stats.txoktotal++;
@@ -1522,13 +1522,13 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
 			else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\
 				(!(priv->ieee80211->queue_stop))) {
 				// Tx Driver Aggregation process
-				/* The driver will aggregation the packets according to the following stets
+				/* The driver will aggregation the packets according to the following stats
 				 * 1. check whether there's tx irq available, for it's a completion return
 				 *    function, it should contain enough tx irq;
-				 * 2. check pakcet type;
+				 * 2. check packet type;
 				 * 3. initialize sendlist, check whether the to-be send packet no greater than 1
-				 * 4. aggregation the packets, and fill firmware info and tx desc to it, etc.
-				 * 5. check whehter the packet could be sent, otherwise just insert to wait head
+				 * 4. aggregates the packets, and fill firmware info and tx desc into it, etc.
+				 * 5. check whether the packet could be sent, otherwise just insert into wait head
 				 * */
 				skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]);
 				if(!check_nic_enough_desc(dev, queue_index)) {
@@ -2447,7 +2447,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
 	return 0;
 }
 
-/* handle manage frame frame beacon and probe response */
+/* handle and manage frame from beacon and probe response */
 static int rtl8192_handle_beacon(struct net_device * dev,
 			      struct ieee80211_beacon * beacon,
 			      struct ieee80211_network * network)
@@ -2625,7 +2625,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev)
 void rtl8192_refresh_supportrate(struct r8192_priv* priv)
 {
 	struct ieee80211_device* ieee = priv->ieee80211;
-	//we donot consider set support rate for ABG mode, only HT MCS rate is set here.
+	//we do not consider set support rate for ABG mode, only HT MCS rate is set here.
 	if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
 	{
 		memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16);
@@ -2780,10 +2780,10 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
 	priv->TransmitConfig =
 	//	TCR_DurProcMode |	//for RTL8185B, duration setting by HW
 	//?	TCR_DISReqQsize |
-		(TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)|  // Max DMA Burst Size per Tx DMA Burst, 7: reservied.
+		(TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)|  // Max DMA Burst Size per Tx DMA Burst, 7: reserved.
 		(priv->ShortRetryLimit<<TCR_SRL_OFFSET)|	// Short retry limit
 		(priv->LongRetryLimit<<TCR_LRL_OFFSET) |	// Long retry limit
-		(false ? TCR_SAT: 0);	// FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them
+		(false ? TCR_SAT: 0);	// FALSE: HW provides PLCP length and LENGEXT, TRUE: SW provides them
 #ifdef TO_DO_LIST
 	if(Adapter->bInHctTest)
 		pHalData->ReceiveConfig	=	pHalData->CSMethod |
@@ -3437,7 +3437,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
 		{ // User disable RF via registry.
 			RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
 			MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
-			// Those action will be discard in MgntActSet_RF_State because off the same state
+			// Those actions will be discard in MgntActSet_RF_State because of the same state
 			for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
 				PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
 		}
@@ -3458,7 +3458,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
 		if(pHalData->eRFPowerState == eRfOff)
 		{
 			MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
-			// Those action will be discard in MgntActSet_RF_State because off the same state
+			// Those actions will be discard in MgntActSet_RF_State because of the same state
 			for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
 				PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
 		}
@@ -3586,7 +3586,7 @@ TxCheckStuck(struct net_device *dev)
 	//unsigned long flags;
 
 	//
-	// Decide Stuch threshold according to current power save mode
+	// Decide such threshold according to current power save mode
 	//
 
 //     RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n");
@@ -3745,7 +3745,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev)
 
 		// Driver should not check RX stuck in IBSS mode because it is required to
 		// set Check BSSID in order to send beacon, however, if check BSSID is
-		// set, STA cannot hear any packet a all. Emily, 2008.04.12
+		// set, STA cannot hear any packet at all. Emily, 2008.04.12
 		RxResetType = RxCheckStuck(dev);
 	}
 	if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL)
@@ -3962,7 +3962,7 @@ RESET_START:
 		up(&priv->wx_sem);
 		RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__);
 	//rtl8192_irq_disable(dev);
-		RT_TRACE(COMP_RESET,"%s():===========>start to up the driver\n",__FUNCTION__);
+		RT_TRACE(COMP_RESET,"%s():===========>start up the driver\n",__FUNCTION__);
 		reset_status = _rtl8192_up(dev);
 
 		RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__);
@@ -4155,7 +4155,7 @@ extern	void	rtl819x_watchdog_wqcallback(struct work_struct *work)
 void watch_dog_timer_callback(unsigned long data)
 {
 	struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
-	//printk("===============>watch_dog  timer\n");
+	//printk("===============>watch_dog timer\n");
 	queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0);
 	mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
 }
@@ -4170,7 +4170,7 @@ int _rtl8192_up(struct net_device *dev)
 	init_status = rtl8192_adapter_start(dev);
 	if(!init_status)
 	{
-		RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization is failed!\n", __FUNCTION__);
+		RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__);
 		priv->up=priv->ieee80211->ieee_up = 0;
 		return -EAGAIN;
 	}
@@ -4256,7 +4256,7 @@ int rtl8192_down(struct net_device *dev)
 		skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]);
 	}
 
-	//as cancel_delayed_work will del work->timer, so if work is not definedas struct delayed_work, it will corrupt
+	//as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt
 //	flush_scheduled_work();
 	rtl8192_cancel_deferred_work(priv);
 	deinit_hal_dm(dev);
@@ -4516,7 +4516,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate)
 
 /**
  * Function:     UpdateRxPktTimeStamp
- * Overview:     Recored down the TSF time stamp when receiving a packet
+ * Overview:     Record the TSF time stamp when receiving a packet
  *
  * Input:
  *       PADAPTER        Adapter
@@ -4556,10 +4556,10 @@ long rtl819x_translate_todbm(u8 signal_strength_index	)// 0-100 index.
 }
 
 
-/* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to
+/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to
     be a local static. Otherwise, it may increase when we return from S3/S4. The
-    value will be kept in memory or disk. We must delcare the value in adapter
-    and it will be reinitialized when return from S3/S4. */
+    value will be kept in memory or disk. Declare the value in the adaptor
+    and it will be reinitialized when returned from S3/S4. */
 void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats)
 {
 	bool bcheck = false;
@@ -5091,8 +5091,8 @@ static void rtl8192_query_rxphystatus(
 			tmp_rxevm =	pofdm_buf->rxevm_X[i];
 			rx_evmX = (char)(tmp_rxevm);
 
-			// Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
-			// fill most significant bit to "zero" when doing shifting operation which may change a negative
+			// Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment
+			// will set the most significant bit to "zero" when doing shifting operation which may change a negative
 			// value to positive one, then the dbm value (which is supposed to be negative)  is not correct anymore.
 			rx_evmX /= 2;	//dbm
 
@@ -5171,7 +5171,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
 	type = WLAN_FC_GET_TYPE(fc);
 	praddr = hdr->addr1;
 
-	/* Check if the received packet is acceptabe. */
+	/* Check if the received packet is acceptable. */
 	bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
 							(eqMacAddr(priv->ieee80211->current_network.bssid,  (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
 								 && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
@@ -5211,7 +5211,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
 
 /**
 * Function:	UpdateReceivedRateHistogramStatistics
-* Overview:	Recored down the received data rate
+* Overview:	Record the received data rate
 *
 * Input:
 * 	struct net_device *dev
@@ -5401,7 +5401,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
 	}
 
 #ifdef USB_RX_AGGREGATION_SUPPORT
-	/* for the rx aggregated sub frame, the redundant space truelly contained in the packet */
+	/* for the rx aggregated sub frame, the redundant space truly contained in the packet */
 	if(bIsRxAggrSubframe) {
 		skb_pull(skb, 8);
 	}
@@ -5480,7 +5480,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
 			PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false);
 		}
 #endif
-		/* Process the MPDU recevied */
+		/* Process the MPDU received */
 		skb_trim(skb, skb->len - 4/*sCrcLng*/);
 
 		rx_pkt_len = skb->len;
@@ -5538,7 +5538,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
 				if(PacketLength > agg_skb->len) {
 					break;
 				}
-				/* Process the MPDU recevied */
+				/* Process the MPDU received */
 				skb = dev_alloc_skb(PacketLength);
 				memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength);
 				skb_trim(skb, skb->len - 4/*sCrcLng*/);
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 2dde9fa5c21e..cd8dc85e9c0f 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -38,7 +38,7 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
 /*------------------------Define global variable-----------------------------*/
 // Debug variable ?
 dig_t	dm_digtable;
-// Store current shoftware write register content for MAC PHY.
+// Store current software write register content for MAC PHY.
 u8		dm_shadow[16][256] = {{0}};
 // For Dynamic Rx Path Selection by Signal Strength
 DRxPathSel	DM_RxPathSelTable;
@@ -119,7 +119,7 @@ static	void	dm_pd_th(struct net_device *dev);
 static	void	dm_cs_ratio(struct net_device *dev);
 
 static	void dm_init_ctstoself(struct net_device *dev);
-// DM --> EDCA turboe mode control
+// DM --> EDCA turbo mode control
 static	void	dm_check_edca_turbo(struct net_device *dev);
 
 // DM --> HW RF control
@@ -348,7 +348,7 @@ extern void init_rate_adaptive(struct net_device * dev)
  *
  * Revised History:
  *	When		Who		Remark
- *	05/26/08	amy 	Create version 0 proting from windows code.
+ *	05/26/08	amy 	Create version 0 porting from windows code.
  *
  *---------------------------------------------------------------------------*/
 static void dm_check_rate_adaptive(struct net_device * dev)
@@ -543,7 +543,7 @@ static u32 OFDMSwingTable[OFDM_Table_Length] = {
 	0x5a400169,	// 3, +3db
 	0x50800142,	// 4, +2db
 	0x47c0011f,	// 5, +1db
-	0x40000100,	// 6, +0db ===> default, upper for higher temprature, lower for low temprature
+	0x40000100,	// 6, +0db ===> default, upper for higher temperature, lower for low temperature
 	0x390000e4,	// 7, -1db
 	0x32c000cb,	// 8, -2db
 	0x2d4000b5,	// 9, -3db
@@ -678,7 +678,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
 		{
 			write_nic_byte(dev, 0x1ba, 0);
 			viviflag = FALSE;
-			RT_TRACE(COMP_POWER_TRACKING, "we filted this data\n");
+			RT_TRACE(COMP_POWER_TRACKING, "we filtered the data\n");
 			for(k = 0;k < 5; k++)
 				tmp_report[k] = 0;
 			break;
@@ -864,14 +864,14 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 	RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA);
 	if(tmpRegA < 3 || tmpRegA > 13)
 		return;
-	if(tmpRegA >= 12)	// if over 12, TP will be bad when high temprature
+	if(tmpRegA >= 12)	// if over 12, TP will be bad when high temperature
 		tmpRegA = 12;
 	RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA);
 	priv->ThermalMeter[0] = ThermalMeterVal;	//We use fixed value by Bryant's suggestion
 	priv->ThermalMeter[1] = ThermalMeterVal;	//We use fixed value by Bryant's suggestion
 
-	//Get current RF-A temprature index
-	if(priv->ThermalMeter[0] >= (u8)tmpRegA)	//lower temprature
+	//Get current RF-A temperature index
+	if(priv->ThermalMeter[0] >= (u8)tmpRegA)	//lower temperature
 	{
 		tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA);
 		tmpCCK40Mindex = tmpCCK20Mindex - 6;
@@ -885,7 +885,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
 	else
 	{
 		tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]);
-		if(tmpval >= 6)								// higher temprature
+		if(tmpval >= 6)								// higher temperature
 			tmpOFDMindex = tmpCCK20Mindex = 0;		// max to +6dB
 		else
 			tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval;
@@ -1457,9 +1457,9 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 
-	// Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism
+	// Tx Power tracking by Thermal Meter requires Firmware R/W 3-wire. This mechanism
 	// can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w
-	// 3-wire by driver cause RF goes into wrong state.
+	// 3-wire by driver causes RF to go into a wrong state.
 	if(priv->ieee80211->FwRWRF)
 		priv->btxpower_tracking = TRUE;
 	else
@@ -1520,7 +1520,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
 
 	if(!TM_Trigger)
 	{
-		//Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash
+		//Attention!! You have to write all 12bits of data to RF, or it may cause RF to crash
 		//actually write reg0x02 bit1=0, then bit1=1.
 		//DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
 		rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
@@ -1744,7 +1744,7 @@ extern void dm_restore_dynamic_mechanism_state(struct net_device *dev)
 			write_nic_dword(dev, RATR0, ratr_value);
 			write_nic_byte(dev, UFWP, 1);
 	}
-	//Resore TX Power Tracking Index
+	//Restore TX Power Tracking Index
 	if(priv->btxpower_trackingInit && priv->btxpower_tracking){
 		dm_txpower_reset_recovery(dev);
 	}
@@ -2031,7 +2031,7 @@ static void dm_dig_init(struct net_device *dev)
 	dm_digtable.dbg_mode = DM_DBG_OFF;	//off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig
 	dm_digtable.dig_algorithm_switch = 0;
 
-	/* 2007/10/04 MH Define init gain threshol. */
+	/* 2007/10/04 MH Define init gain threshold. */
 	dm_digtable.dig_state		= DM_STA_DIG_MAX;
 	dm_digtable.dig_highpwr_state	= DM_STA_DIG_MAX;
 	dm_digtable.initialgain_lowerbound_state = false;
@@ -2097,7 +2097,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
 		return;
 
 	//DbgPrint("Dig by Sw Rssi \n");
-	if(dm_digtable.dig_algorithm_switch)	// if swithed algorithm, we have to disable FW Dig.
+	if(dm_digtable.dig_algorithm_switch)	// if switched algorithm, we have to disable FW Dig.
 		fw_dig = 0;
 	if(fw_dig <= 3)	// execute several times to make sure the FW Dig is disabled
 	{// FW DIG Off
@@ -2160,8 +2160,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 	/*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
 	pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
 	DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
-	/* 1. When RSSI decrease, We have to judge if it is smaller than a treshold
-		  and then execute below step. */
+	/* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
+		  and then execute the step below. */
 	if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh))
 	{
 		/* 2008/02/05 MH When we execute silent reset, the DIG PHY parameters
@@ -2220,8 +2220,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
 
 	}
 
-	/* 2. When RSSI increase, We have to judge if it is larger than a treshold
-		  and then execute below step.  */
+	/* 2. When RSSI increase, We have to judge if it is larger than a threshold
+		  and then execute the step below.  */
 	if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) )
 	{
 		u8 reset_flag = 0;
@@ -2329,7 +2329,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
 	}
 
 	/* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
-		  it is larger than a treshold and then execute below step.  */
+		  it is larger than a threshold and then execute the step below.  */
 	// 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
 	if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh)
 	{
@@ -2841,8 +2841,8 @@ static void dm_check_rfctrl_gpio(struct net_device * dev)
 {
 	//struct r8192_priv *priv = ieee80211_priv(dev);
 
-	// Walk around for DTM test, we will not enable HW - radio on/off because r/w
-	// page 1 register before Lextra bus is enabled cause system fails when resuming
+	// Work around for DTM test, we will not enable HW - radio on/off because r/w
+	// page 1 register before extra bus is enabled causing system failures when resuming
 	// from S4. 20080218, Emily
 
 	// Stop to execute workitem to prevent S3/S4 bug.
@@ -3377,30 +3377,30 @@ extern void dm_fsync_timer_callback(unsigned long data)
 		{
 
 			u32 DiffNum = priv->rateCountDiffRecord - rate_count_diff;
-			// Contiune count
+			// Continue count
 			if(DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold)
-				priv->ContiuneDiffCount++;
+				priv->ContinueDiffCount++;
 			else
-				priv->ContiuneDiffCount = 0;
+				priv->ContinueDiffCount = 0;
 
-			// Contiune count over
-			if(priv->ContiuneDiffCount >=2)
+			// Continue count over
+			if(priv->ContinueDiffCount >=2)
 			{
 				bSwitchFromCountDiff = true;
-				priv->ContiuneDiffCount = 0;
+				priv->ContinueDiffCount = 0;
 			}
 		}
 		else
 		{
-			// Stop contiune count
-			priv->ContiuneDiffCount = 0;
+			// Stop the continued count
+			priv->ContinueDiffCount = 0;
 		}
 
 		//If Count diff <= FsyncRateCountThreshold
 		if(rate_count_diff <= priv->ieee80211->fsync_firstdiff_ratethreshold)
 		{
 			bSwitchFromCountDiff = true;
-			priv->ContiuneDiffCount = 0;
+			priv->ContinueDiffCount = 0;
 		}
 		priv->rate_record = rate_count;
 		priv->rateCountDiffRecord = rate_count_diff;
@@ -3468,14 +3468,14 @@ extern void dm_fsync_timer_callback(unsigned long data)
 		#endif
 			write_nic_byte(dev, 0xC3e, 0x96);
 		}
-		priv->ContiuneDiffCount = 0;
+		priv->ContinueDiffCount = 0;
 	#ifdef RTL8190P
 		write_nic_dword(dev, rOFDM0_RxDetector2, 0x164052cd);
 	#else
 		write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
 	#endif
 	}
-	RT_TRACE(COMP_HALDM, "ContiuneDiffCount %d\n", priv->ContiuneDiffCount);
+	RT_TRACE(COMP_HALDM, "ContinueDiffCount %d\n", priv->ContinueDiffCount);
 	RT_TRACE(COMP_HALDM, "rateRecord %d rateCount %d, rateCountdiff %d bSwitchFsync %d\n", priv->rate_record, rate_count, rate_count_diff , priv->bswitch_fsync);
 }
 
@@ -3507,7 +3507,7 @@ static void dm_EndSWFsync(struct net_device *dev)
 		write_nic_byte(dev, 0xC3e, 0x96);
 	}
 
-	priv->ContiuneDiffCount = 0;
+	priv->ContinueDiffCount = 0;
 #ifndef RTL8190P
 	write_nic_dword(dev, rOFDM0_RxDetector2, 0x465c52cd);
 #endif
@@ -3523,8 +3523,8 @@ static void dm_StartSWFsync(struct net_device *dev)
 	RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__);
 	// Initial rate record to zero, start to record.
 	priv->rate_record = 0;
-	// Initial contiune diff count to zero, start to record.
-	priv->ContiuneDiffCount = 0;
+	// Initialize continue diff count to zero, start to record.
+	priv->ContinueDiffCount = 0;
 	priv->rateCountDiffRecord = 0;
 	priv->bswitch_fsync  = false;
 
@@ -3875,7 +3875,7 @@ static void dm_send_rssi_tofw(struct net_device *dev)
 
 	// If we test chariot, we should stop the TX command ?
 	// Because 92E will always silent reset when we send tx command. We use register
-	// 0x1e0(byte) to botify driver.
+	// 0x1e0(byte) to notify driver.
 	write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
 	return;
 	tx_cmd.Op		= TXCMD_SET_RX_RSSI;
diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h
index e89aaf70143b..1bfe871dcfb2 100644
--- a/drivers/staging/rtl8192u/r8192U_hw.h
+++ b/drivers/staging/rtl8192u/r8192U_hw.h
@@ -10,7 +10,7 @@
 	Parts of this driver are based on the Intel Pro Wireless
 	2100 GPL driver.
 
-	We want to tanks the Authors of those projects
+	We want to thank the Authors of those projects
 	and the Ndiswrapper project Authors.
 */
 
diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
index f6408f98ede6..71f2d2349c38 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.c
+++ b/drivers/staging/rtl8192u/r8192U_wx.c
@@ -13,7 +13,7 @@
 
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
 
-   We want to tanks the Authors of those projects and the Ndiswrapper
+   We want to thank the Authors of those projects and the Ndiswrapper
    project Authors.
 */
 
@@ -256,7 +256,7 @@ static int r8192_wx_get_ap_status(struct net_device *dev,
 	//count the length of input ssid
 	for(name_len=0 ; ((char*)wrqu->data.pointer)[name_len]!='\0' ; name_len++);
 
-	//search for the correspoding info which is received
+	//search for the corresponding info which is received
 	list_for_each_entry(target, &ieee->network_list, list) {
 		if ( (target->ssid_len == name_len) &&
 		     (strncmp(target->ssid, (char*)wrqu->data.pointer, name_len)==0)){
@@ -419,7 +419,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
 	range->max_qual.updated = 7; /* Updated all three */
 
 	range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
-	/* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+	/* TODO: Find real 'good' to 'bad' threshold value for RSSI */
 	range->avg_qual.level = 20 + -98;
 	range->avg_qual.noise = 0;
 	range->avg_qual.updated = 7; /* Updated all three */
@@ -1047,7 +1047,7 @@ static iw_handler r8192_wx_handlers[] =
 #else
 	 NULL,
 #endif
-	dummy,                     /* SIOCGIWAPLIST -- depricated */
+	dummy,                     /* SIOCGIWAPLIST -- deprecated */
 	r8192_wx_set_scan,        /* SIOCSIWSCAN */
 	r8192_wx_get_scan,        /* SIOCGIWSCAN */
 	r8192_wx_set_essid,       /* SIOCSIWESSID */
@@ -1211,9 +1211,9 @@ struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev)
 
 struct iw_handler_def  r8192_wx_handlers_def={
 	.standard = r8192_wx_handlers,
-	.num_standard = sizeof(r8192_wx_handlers) / sizeof(iw_handler),
+	.num_standard = ARRAY_SIZE(r8192_wx_handlers),
 	.private = r8192_private_handler,
-	.num_private = sizeof(r8192_private_handler) / sizeof(iw_handler),
+	.num_private = ARRAY_SIZE(r8192_private_handler),
 	.num_private_args = sizeof(r8192_private_args) / sizeof(struct iw_priv_args),
 #if WIRELESS_EXT >= 17
 	.get_wireless_stats = r8192_get_wireless_stats,
diff --git a/drivers/staging/rtl8192u/r8192U_wx.h b/drivers/staging/rtl8192u/r8192U_wx.h
index f4cf2801136a..9f6b10505426 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.h
+++ b/drivers/staging/rtl8192u/r8192U_wx.h
@@ -7,7 +7,7 @@
 	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
 	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
 
-	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
+	We want to thank the Authors of such projects and the Ndiswrapper project Authors.
 */
 
 /* this file (will) contains wireless extension handlers*/
diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h
index 2ac421626e7c..e07f8b17a0d6 100644
--- a/drivers/staging/rtl8192u/r819xU_HTType.h
+++ b/drivers/staging/rtl8192u/r819xU_HTType.h
@@ -211,7 +211,7 @@ typedef struct _RT_HIGH_THROUGHPUT{
 	u8				bEnableHT;
 	u8				bCurrentHTSupport;
 
-	u8				bRegBW40MHz;				// Tx 40MHz channel capablity
+	u8				bRegBW40MHz;				// Tx 40MHz channel capability
 	u8				bCurBW40MHz;				// Tx 40MHz channel capability
 
 	u8				bRegShortGI40MHz;			// Tx Short GI for 40Mhz
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
index 0cb28c776c49..a8a6dc2c365f 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
@@ -157,7 +157,7 @@ SendTxCommandPacket(
 		seg_ptr = skb_put(skb, buffer_len);
 		/*
 		 * Transform from little endian to big endian
-		 * and pending  zero
+		 * and pending zero
 		 */
 		memcpy(seg_ptr,codevirtualaddress,buffer_len);
 		tcb_desc->txbuf_size= (u16)buffer_len;
@@ -697,7 +697,6 @@ cmpk_message_handle_rx(
 	struct ieee80211_rx_stats *pstats)
 {
 //	u32			debug_level = DBG_LOUD;
-	struct r8192_priv *priv = ieee80211_priv(dev);
 	int			total_length;
 	u8			cmd_length, exe_cnt = 0;
 	u8			element_id;
@@ -719,15 +718,15 @@ cmpk_message_handle_rx(
 	/* 2. Read virtual address from RFD. */
 	pcmd_buff = pstats->virtual_address;
 
-	/* 3. Read command pakcet element id and length. */
+	/* 3. Read command packet element id and length. */
 	element_id = pcmd_buff[0];
 	/*RT_TRACE(COMP_SEND, DebugLevel,
 			("\n\r[CMPK]-->element ID=%d Len=%d", element_id, total_length));*/
 
-	/* 4. Check every received command packet conent according to different
+	/* 4. Check every received command packet content according to different
 	      element type. Because FW may aggregate RX command packet to minimize
 	      transmit time between DRV and FW.*/
-	// Add a counter to prevent to locked in the loop too long
+	// Add a counter to prevent the lock in the loop from being held too long
 	while (total_length > 0 || exe_cnt++ >100)
 	{
 		/* 2007/01/17 MH We support aggregation of different cmd in the same packet. */
@@ -779,9 +778,6 @@ cmpk_message_handle_rx(
 		// 2007/01/22 MH Add to display tx statistic.
 		//cmpk_DisplayTxStatistic(pAdapter);
 
-		/* 2007/03/09 MH Collect sidderent cmd element pkt num. */
-		priv->stats.rxcmdpkt[element_id]++;
-
 		total_length -= cmd_length;
 		pcmd_buff    += cmd_length;
 	}	/* while (total_length > 0) */
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 4bb5fffca5b9..b12d19079798 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -275,11 +275,11 @@ bool init_firmware(struct net_device *dev)
 
 	/*
 	 * Download boot, main, and data image for System reset.
-	 * Download data image for firmware reseta
+	 * Download data image for firmware reset
 	 */
 	for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
 		/*
-		 * Open Image file, and map file to contineous memory if open file success.
+		 * Open image file, and map file to continuous memory if open file success.
 		 * or read image file from array. Default load from IMG file
 		 */
 		if(rst_opt == OPT_SYSTEM_RESET) {
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index c4586b0817d1..dd1954daea2d 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -40,7 +40,7 @@ static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
  *	     and do register read/write
  *   input:  u32	dwBitMask  //taget bit pos in the addr to be modified
  *  output:  none
- *  return:  u32	return the shift bit bit position of the mask
+ *  return:  u32	return the shift bit position of the mask
  * ****************************************************************************/
 u32 rtl8192_CalculateBitShift(u32 dwBitMask)
 {
@@ -176,7 +176,7 @@ u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath,
 	rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,  bLSSIReadEdge, 0x1);
 
 
-	// TODO: we should not delay such a  long time. Ask help from SD3
+	// TODO: we should not delay such a long time. Ask for help from SD3
 	msleep(1);
 
 	ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
@@ -252,7 +252,7 @@ void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath
 		NewOffset = Offset;
 	}
 
-	// Put write addr in [5:0]  and write data in [31:16]
+	// Put write addr in [5:0] and write data in [31:16]
 	DataAndAddr = (Data<<16) | (NewOffset&0x3f);
 
 	// Write Operation
@@ -525,7 +525,7 @@ void rtl8192_phy_configmac(struct net_device* dev)
 }
 
 /******************************************************************************
- *function:  This function do dirty work
+ *function:  This function does dirty work
  *   input:  dev
  *  output:  none
  *  return:  none
@@ -578,7 +578,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
 void rtl8192_InitBBRFRegDef(struct net_device* dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-// RF Interface Sowrtware Control
+// RF Interface Software Control
 	priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
 	priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
 	priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
@@ -602,7 +602,7 @@ void rtl8192_InitBBRFRegDef(struct net_device* dev)
 	priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A)
 	priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E)
 
-	//Addr of LSSI. Wirte RF register by driver
+	//Addr of LSSI. Write RF register by driver
 	priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
 	priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
 	priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter;
@@ -1384,7 +1384,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u
 }
 
 /******************************************************************************
- *function:  This function does acturally set channel work
+ *function:  This function does actually set channel work
  *   input:  struct net_device *dev
  *   	     u8 		channel
  *  output:  none
@@ -1425,7 +1425,7 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev)
 }
 
 /******************************************************************************
- *function:  This function scheduled actural workitem to set channel
+ *function:  This function scheduled actual work item to set channel
  *   input:  net_device dev
  *   	     u8		channel //channel to set
  *  output:  none
diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h
index 06b0b539e1bc..50f24dce8b16 100644
--- a/drivers/staging/rtl8192u/r819xU_phyreg.h
+++ b/drivers/staging/rtl8192u/r819xU_phyreg.h
@@ -443,7 +443,7 @@
 #define bCCKRxIG                  			0x7f00
 #define bCCKLNAPolarity           		0x800000
 #define bCCKRx1stGain             		0x7f0000
-#define bCCKRFExtend              		0x20000000 //CCK Rx Iinital gain polarity
+#define bCCKRFExtend              		0x20000000 //CCK Rx inital gain polarity
 #define bCCKRxAGCSatLevel        		0x1f000000
 #define bCCKRxAGCSatCount       		0xe0
 #define bCCKRxRFSettle            		0x1f       //AGCsamp_dly
diff --git a/drivers/staging/rtl8712/big_endian.h b/drivers/staging/rtl8712/big_endian.h
deleted file mode 100644
index b16f8ecf99c6..000000000000
--- a/drivers/staging/rtl8712/big_endian.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * Modifications for inclusion into the Linux staging tree are
- * Copyright(c) 2010 Larry Finger. All rights reserved.
- *
- * Contact information:
- * WLAN FAE <wlanfae@realtek.com>
- * Larry Finger <Larry.Finger@lwfinger.net>
- *
- ******************************************************************************/
-#ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H
-#define _LINUX_BYTEORDER_BIG_ENDIAN_H
-
-#ifndef __BIG_ENDIAN
-#define __BIG_ENDIAN 4321
-#endif
-#ifndef __BIG_ENDIAN_BITFIELD
-#define __BIG_ENDIAN_BITFIELD
-#endif
-
-#include "swab.h"
-
-#define __constant_htonl(x) ((__u32)(x))
-#define __constant_ntohl(x) ((__u32)(x))
-#define __constant_htons(x) ((__u16)(x))
-#define __constant_ntohs(x) ((__u16)(x))
-#define __constant_cpu_to_le64(x) ___constant_swab64((x))
-#define __constant_le64_to_cpu(x) ___constant_swab64((x))
-#define __constant_cpu_to_le32(x) ___constant_swab32((x))
-#define __constant_le32_to_cpu(x) ___constant_swab32((x))
-#define __constant_cpu_to_le16(x) ___constant_swab16((x))
-#define __constant_le16_to_cpu(x) ___constant_swab16((x))
-#define __constant_cpu_to_be64(x) ((__u64)(x))
-#define __constant_be64_to_cpu(x) ((__u64)(x))
-#define __constant_cpu_to_be32(x) ((__u32)(x))
-#define __constant_be32_to_cpu(x) ((__u32)(x))
-#define __constant_cpu_to_be16(x) ((__u16)(x))
-#define __constant_be16_to_cpu(x) ((__u16)(x))
-#define __cpu_to_le64(x) __swab64((x))
-#define __le64_to_cpu(x) __swab64((x))
-#define __cpu_to_le32(x) __swab32((x))
-#define __le32_to_cpu(x) __swab32((x))
-#define __cpu_to_le16(x) __swab16((x))
-#define __le16_to_cpu(x) __swab16((x))
-#define __cpu_to_be64(x) ((__u64)(x))
-#define __be64_to_cpu(x) ((__u64)(x))
-#define __cpu_to_be32(x) ((__u32)(x))
-#define __be32_to_cpu(x) ((__u32)(x))
-#define __cpu_to_be16(x) ((__u16)(x))
-#define __be16_to_cpu(x) ((__u16)(x))
-#define __cpu_to_le64p(x) __swab64p((x))
-#define __le64_to_cpup(x) __swab64p((x))
-#define __cpu_to_le32p(x) __swab32p((x))
-#define __le32_to_cpup(x) __swab32p((x))
-#define __cpu_to_le16p(x) __swab16p((x))
-#define __le16_to_cpup(x) __swab16p((x))
-#define __cpu_to_be64p(x) (*(__u64 *)(x))
-#define __be64_to_cpup(x) (*(__u64 *)(x))
-#define __cpu_to_be32p(x) (*(__u32 *)(x))
-#define __be32_to_cpup(x) (*(__u32 *)(x))
-#define __cpu_to_be16p(x) (*(__u16 *)(x))
-#define __be16_to_cpup(x) (*(__u16 *)(x))
-#define __cpu_to_le64s(x) __swab64s((x))
-#define __le64_to_cpus(x) __swab64s((x))
-#define __cpu_to_le32s(x) __swab32s((x))
-#define __le32_to_cpus(x) __swab32s((x))
-#define __cpu_to_le16s(x) __swab16s((x))
-#define __le16_to_cpus(x) __swab16s((x))
-#define __cpu_to_be64s(x) do {} while (0)
-#define __be64_to_cpus(x) do {} while (0)
-#define __cpu_to_be32s(x) do {} while (0)
-#define __be32_to_cpus(x) do {} while (0)
-#define __cpu_to_be16s(x) do {} while (0)
-#define __be16_to_cpus(x) do {} while (0)
-
-#include "generic.h"
-
-#endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
-
diff --git a/drivers/staging/rtl8712/drv_types.h b/drivers/staging/rtl8712/drv_types.h
index e83665d06020..62b55663c63a 100644
--- a/drivers/staging/rtl8712/drv_types.h
+++ b/drivers/staging/rtl8712/drv_types.h
@@ -146,7 +146,7 @@ struct dvobj_priv {
 /**
  * struct _adapter - the main adapter structure for this device.
  *
- * bup: True indicates that the interface is Up.
+ * bup: True indicates that the interface is up.
  */
 struct _adapter {
 	struct	dvobj_priv dvobjpriv;
diff --git a/drivers/staging/rtl8712/generic.h b/drivers/staging/rtl8712/generic.h
deleted file mode 100644
index 8868c9f4adf8..000000000000
--- a/drivers/staging/rtl8712/generic.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * Modifications for inclusion into the Linux staging tree are
- * Copyright(c) 2010 Larry Finger. All rights reserved.
- *
- * Contact information:
- * WLAN FAE <wlanfae@realtek.com>
- * Larry Finger <Larry.Finger@lwfinger.net>
- *
- ******************************************************************************/
-#ifndef _LINUX_BYTEORDER_GENERIC_H
-#define _LINUX_BYTEORDER_GENERIC_H
-
-/*
- * linux/byteorder_generic.h
- * Generic Byte-reordering support
- *
- * Francois-Rene Rideau <fare@tunes.org> 19970707
- *    gathered all the good ideas from all asm-foo/byteorder.h into one file,
- *    cleaned them up.
- *    I hope it is compliant with non-GCC compilers.
- *    I decided to put __BYTEORDER_HAS_U64__ in byteorder.h,
- *    because I wasn't sure it would be ok to put it in types.h
- *    Upgraded it to 2.1.43
- * Francois-Rene Rideau <fare@tunes.org> 19971012
- *    Upgraded it to 2.1.57
- *    to please Linus T., replaced huge #ifdef's between little/big endian
- *    by nestedly #include'd files.
- * Francois-Rene Rideau <fare@tunes.org> 19971205
- *    Made it to 2.1.71; now a facelift:
- *    Put files under include/linux/byteorder/
- *    Split swab from generic support.
- *
- * TODO:
- *   = Regular kernel maintainers could also replace all these manual
- *    byteswap macros that remain, disseminated among drivers,
- *    after some grep or the sources...
- *   = Linus might want to rename all these macros and files to fit his taste,
- *    to fit his personal naming scheme.
- *   = it seems that a few drivers would also appreciate
- *    nybble swapping support...
- *   = every architecture could add their byteswap macro in asm/byteorder.h
- *    see how some architectures already do (i386, alpha, ppc, etc)
- *   = cpu_to_beXX and beXX_to_cpu might some day need to be well
- *    distinguished throughout the kernel. This is not the case currently,
- *    since little endian, big endian, and pdp endian machines needn't it.
- *    But this might be the case for, say, a port of Linux to 20/21 bit
- *    architectures (and F21 Linux addict around?).
- */
-
-/*
- * The following macros are to be defined by <asm/byteorder.h>:
- *
- * Conversion of long and short int between network and host format
- *	ntohl(__u32 x)
- *	ntohs(__u16 x)
- *	htonl(__u32 x)
- *	htons(__u16 x)
- * It seems that some programs (which? where? or perhaps a standard? POSIX?)
- * might like the above to be functions, not macros (why?).
- * if that's true, then detect them, and take measures.
- * Anyway, the measure is: define only ___ntohl as a macro instead,
- * and in a separate file, have
- * unsigned long inline ntohl(x){return ___ntohl(x);}
- *
- * The same for constant arguments
- *	__constant_ntohl(__u32 x)
- *	__constant_ntohs(__u16 x)
- *	__constant_htonl(__u32 x)
- *	__constant_htons(__u16 x)
- *
- * Conversion of XX-bit integers (16- 32- or 64-)
- * between native CPU format and little/big endian format
- * 64-bit stuff only defined for proper architectures
- *	cpu_to_[bl]eXX(__uXX x)
- *	[bl]eXX_to_cpu(__uXX x)
- *
- * The same, but takes a pointer to the value to convert
- *	cpu_to_[bl]eXXp(__uXX x)
- *	[bl]eXX_to_cpup(__uXX x)
- *
- * The same, but change in situ
- *	cpu_to_[bl]eXXs(__uXX x)
- *	[bl]eXX_to_cpus(__uXX x)
- *
- * See asm-foo/byteorder.h for examples of how to provide
- * architecture-optimized versions
- *
- */
-
-
-/*
- * inside the kernel, we can use nicknames;
- * outside of it, we must avoid POSIX namespace pollution...
- */
-#define cpu_to_le64 __cpu_to_le64
-#define le64_to_cpu __le64_to_cpu
-#define cpu_to_le32 __cpu_to_le32
-#define le32_to_cpu __le32_to_cpu
-#define cpu_to_le16 __cpu_to_le16
-#define le16_to_cpu __le16_to_cpu
-#define cpu_to_be64 __cpu_to_be64
-#define be64_to_cpu __be64_to_cpu
-#define cpu_to_be32 __cpu_to_be32
-#define be32_to_cpu __be32_to_cpu
-#define cpu_to_be16 __cpu_to_be16
-#define be16_to_cpu __be16_to_cpu
-#define cpu_to_le64p __cpu_to_le64p
-#define le64_to_cpup __le64_to_cpup
-#define cpu_to_le32p __cpu_to_le32p
-#define le32_to_cpup __le32_to_cpup
-#define cpu_to_le16p __cpu_to_le16p
-#define le16_to_cpup __le16_to_cpup
-#define cpu_to_be64p __cpu_to_be64p
-#define be64_to_cpup __be64_to_cpup
-#define cpu_to_be32p __cpu_to_be32p
-#define be32_to_cpup __be32_to_cpup
-#define cpu_to_be16p __cpu_to_be16p
-#define be16_to_cpup __be16_to_cpup
-#define cpu_to_le64s __cpu_to_le64s
-#define le64_to_cpus __le64_to_cpus
-#define cpu_to_le32s __cpu_to_le32s
-#define le32_to_cpus __le32_to_cpus
-#define cpu_to_le16s __cpu_to_le16s
-#define le16_to_cpus __le16_to_cpus
-#define cpu_to_be64s __cpu_to_be64s
-#define be64_to_cpus __be64_to_cpus
-#define cpu_to_be32s __cpu_to_be32s
-#define be32_to_cpus __be32_to_cpus
-#define cpu_to_be16s __cpu_to_be16s
-#define be16_to_cpus __be16_to_cpus
-
-
-/*
- * Handle ntohl and suches. These have various compatibility
- * issues - like we want to give the prototype even though we
- * also have a macro for them in case some strange program
- * wants to take the address of the thing or something..
- *
- * Note that these used to return a "long" in libc5, even though
- * long is often 64-bit these days.. Thus the casts.
- *
- * They have to be macros in order to do the constant folding
- * correctly - if the argument passed into a inline function
- * it is no longer constant according to gcc..
- */
-
-#undef ntohl
-#undef ntohs
-#undef htonl
-#undef htons
-
-/*
- * Do the prototypes. Somebody might want to take the
- * address or some such sick thing..
- */
-extern __u32			ntohl(__u32);
-extern __u32			htonl(__u32);
-extern unsigned short int	ntohs(unsigned short int);
-extern unsigned short int	htons(unsigned short int);
-
-#endif /* _LINUX_BYTEORDER_GENERIC_H */
-
diff --git a/drivers/staging/rtl8712/hal_init.c b/drivers/staging/rtl8712/hal_init.c
index cc893c0f5ad3..cb9d4cfe8fe4 100644
--- a/drivers/staging/rtl8712/hal_init.c
+++ b/drivers/staging/rtl8712/hal_init.c
@@ -36,7 +36,6 @@
 
 #include "osdep_service.h"
 #include "drv_types.h"
-#include "rtl871x_byteorder.h"
 #include "usb_osintf.h"
 
 #define FWBUFF_ALIGN_SZ 512
diff --git a/drivers/staging/rtl8712/ieee80211.h b/drivers/staging/rtl8712/ieee80211.h
index 3c0092b7de09..21515c31b373 100644
--- a/drivers/staging/rtl8712/ieee80211.h
+++ b/drivers/staging/rtl8712/ieee80211.h
@@ -705,7 +705,7 @@ enum ieee80211_state {
 	IEEE80211_ASSOCIATING_RETRY,
 	/* the association procedure is sending AUTH request*/
 	IEEE80211_ASSOCIATING_AUTHENTICATING,
-	/* the association procedure has successfully authentcated
+	/* the association procedure has successfully authenticated
 	 * and is sending association request
 	 */
 	IEEE80211_ASSOCIATING_AUTHENTICATED,
diff --git a/drivers/staging/rtl8712/if_ether.h b/drivers/staging/rtl8712/if_ether.h
deleted file mode 100644
index 2bbe527bcd5c..000000000000
--- a/drivers/staging/rtl8712/if_ether.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * Modifications for inclusion into the Linux staging tree are
- * Copyright(c) 2010 Larry Finger. All rights reserved.
- *
- * Contact information:
- * WLAN FAE <wlanfae@realtek.com>
- * Larry Finger <Larry.Finger@lwfinger.net>
- *
- ******************************************************************************/
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Ethernet IEEE 802.3 interface.
- *
- * Version:	@(#)if_ether.h	1.0.1a	02/08/94
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *		Donald Becker, <becker@super.org>
- *		Alan Cox, <alan@redhat.com>
- *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_IF_ETHER_H
-#define _LINUX_IF_ETHER_H
-
-/*
- *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
- *	and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
-#define ETH_HLEN	14		/* Total octets in header.	 */
-#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
-#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
-
-/*
- *	These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
-#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
-#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
-#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
-#define ETH_P_X25	0x0805		/* CCITT X.25			*/
-#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
-#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet
-					 * [ NOT AN OFFICIAL ID ] */
-#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
-#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr
-					 * Trans packet */
-#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
-#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
-#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
-#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
-#define ETH_P_LAT       0x6004          /* DEC LAT                      */
-#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
-#define ETH_P_CUST      0x6006          /* DEC Customer use             */
-#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
-#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
-#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
-#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
-#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
-#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
-#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
-#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
-#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
-#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
-#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
-					 * over Ethernet
-					 */
-
-/*
- *	Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
-#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
-#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
-#define ETH_P_802_2	0x0004		/* 802.2 frames			*/
-#define ETH_P_SNAP	0x0005		/* Internal only		*/
-#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
-#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type	*/
-#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2	0x0011i		/* 802.2 frames			*/
-#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
-#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
-#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
-#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
-
-/*
- *	This is an Ethernet frame header.
- */
-
-struct ethhdr {
-	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
-	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
-	unsigned short	h_proto;		/* packet type ID field	*/
-};
-
-struct _vlan {
-	unsigned short  h_vlan_TCI;	/* Encapsulates priority and VLAN ID*/
-	unsigned short  h_vlan_encapsulated_proto;
-};
-
-
-
-#define get_vlan_id(pvlan) ((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
-#define get_vlan_priority(pvlan) ((ntohs((unsigned short)\
-				 pvlan->h_vlan_TCI)) >> 13)
-#define get_vlan_encap_proto(pvlan) (ntohs((unsigned short)\
-				    pvlan->h_vlan_encapsulated_proto))
-
-
-#endif	/* _LINUX_IF_ETHER_H */
-
diff --git a/drivers/staging/rtl8712/ip.h b/drivers/staging/rtl8712/ip.h
deleted file mode 100644
index f37b0f8d14d4..000000000000
--- a/drivers/staging/rtl8712/ip.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the IP protocol.
- *
- * Version:	@(#)ip.h	1.0.2	04/28/93
- *
- * Authors:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IP_H
-#define _LINUX_IP_H
-
-#include "rtl871x_byteorder.h"
-
-/* SOL_IP socket options */
-
-#define IPTOS_TOS_MASK		0x1E
-#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
-#define	IPTOS_LOWDELAY		0x10
-#define	IPTOS_THROUGHPUT	0x08
-#define	IPTOS_RELIABILITY	0x04
-#define	IPTOS_MINCOST		0x02
-
-#define IPTOS_PREC_MASK		0xE0
-#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
-#define IPTOS_PREC_NETCONTROL           0xe0
-#define IPTOS_PREC_INTERNETCONTROL      0xc0
-#define IPTOS_PREC_CRITIC_ECP           0xa0
-#define IPTOS_PREC_FLASHOVERRIDE        0x80
-#define IPTOS_PREC_FLASH                0x60
-#define IPTOS_PREC_IMMEDIATE            0x40
-#define IPTOS_PREC_PRIORITY             0x20
-#define IPTOS_PREC_ROUTINE              0x00
-
-/* IP options */
-#define IPOPT_COPY		0x80
-#define IPOPT_CLASS_MASK	0x60
-#define IPOPT_NUMBER_MASK	0x1f
-
-#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
-#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
-#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
-
-#define	IPOPT_CONTROL		0x00
-#define	IPOPT_RESERVED1		0x20
-#define	IPOPT_MEASUREMENT	0x40
-#define	IPOPT_RESERVED2		0x60
-
-#define IPOPT_END	(0 | IPOPT_CONTROL)
-#define IPOPT_NOOP	(1 | IPOPT_CONTROL)
-#define IPOPT_SEC	(2 | IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_LSRR	(3 | IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_TIMESTAMP	(4 | IPOPT_MEASUREMENT)
-#define IPOPT_RR	(7 | IPOPT_CONTROL)
-#define IPOPT_SID	(8 | IPOPT_CONTROL | IPOPT_COPY)
-#define IPOPT_SSRR	(9 | IPOPT_CONTROL | IPOPT_COPY)
-#define IPOPT_RA	(20 | IPOPT_CONTROL | IPOPT_COPY)
-
-#define IPVERSION	4
-#define MAXTTL		255
-#define IPDEFTTL	64
-
-/* struct timestamp, struct route and MAX_ROUTES are removed.
- *
- * REASONS: it is clear that nobody used them because:
- * - MAX_ROUTES value was wrong.
- * - "struct route" was wrong.
- * - "struct timestamp" had fatally misaligned bitfields and was completely
- *   unusable.
- */
-
-#define IPOPT_OPTVAL 0
-#define IPOPT_OLEN   1
-#define IPOPT_OFFSET 2
-#define IPOPT_MINOFF 4
-#define MAX_IPOPTLEN 40
-#define IPOPT_NOP IPOPT_NOOP
-#define IPOPT_EOL IPOPT_END
-#define IPOPT_TS  IPOPT_TIMESTAMP
-
-#define	IPOPT_TS_TSONLY		0		/* timestamps only */
-#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
-#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
-
-struct ip_options {
-	__u32		faddr;			/* Saved first hop address */
-	unsigned char	optlen;
-	unsigned char srr;
-	unsigned char rr;
-	unsigned char ts;
-	unsigned char is_setbyuser:1,	/* Set by setsockopt?		      */
-		      is_data:1,	/* Options in __data, rather than skb */
-		      is_strictroute:1, /* Strict source route		      */
-		      srr_is_hit:1,	/* Packet destination addr was our one*/
-		      is_changed:1,	/* IP checksum more not valid	      */
-		      rr_needaddr:1,	/* Need to record addr of outgoing dev*/
-		      ts_needtime:1,	/* Need to record timestamp	      */
-		      ts_needaddr:1;	/* Need to record addr of outgoing dev*/
-	unsigned char router_alert;
-	unsigned char __pad1;
-	unsigned char __pad2;
-	unsigned char __data[0];
-};
-
-#define optlength(opt) (sizeof(struct ip_options) + opt->optlen)
-
-struct iphdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	ihl:4,
-		version:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	version:4,
-		ihl:4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8	tos;
-	__u16	tot_len;
-	__u16	id;
-	__u16	frag_off;
-	__u8	ttl;
-	__u8	protocol;
-	__u16	check;
-	__u32	saddr;
-	__u32	daddr;
-	/*The options start here. */
-};
-
-#endif	/* _LINUX_IP_H */
-
diff --git a/drivers/staging/rtl8712/little_endian.h b/drivers/staging/rtl8712/little_endian.h
deleted file mode 100644
index cd57d6c2850f..000000000000
--- a/drivers/staging/rtl8712/little_endian.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * Modifications for inclusion into the Linux staging tree are
- * Copyright(c) 2010 Larry Finger. All rights reserved.
- *
- * Contact information:
- * WLAN FAE <wlanfae@realtek.com>
- * Larry Finger <Larry.Finger@lwfinger.net>
- *
- ******************************************************************************/
-#ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H
-#define _LINUX_BYTEORDER_LITTLE_ENDIAN_H
-
-#ifndef __LITTLE_ENDIAN
-#define __LITTLE_ENDIAN 1234
-#endif
-#ifndef __LITTLE_ENDIAN_BITFIELD
-#define __LITTLE_ENDIAN_BITFIELD
-#endif
-
-#include "swab.h"
-
-#define __constant_htonl(x) ___constant_swab32((x))
-#define __constant_ntohl(x) ___constant_swab32((x))
-#define __constant_htons(x) ___constant_swab16((x))
-#define __constant_ntohs(x) ___constant_swab16((x))
-#define __constant_cpu_to_le64(x) ((__u64)(x))
-#define __constant_le64_to_cpu(x) ((__u64)(x))
-#define __constant_cpu_to_le32(x) ((__u32)(x))
-#define __constant_le32_to_cpu(x) ((__u32)(x))
-#define __constant_cpu_to_le16(x) ((__u16)(x))
-#define __constant_le16_to_cpu(x) ((__u16)(x))
-#define __constant_cpu_to_be64(x) ___constant_swab64((x))
-#define __constant_be64_to_cpu(x) ___constant_swab64((x))
-#define __constant_cpu_to_be32(x) ___constant_swab32((x))
-#define __constant_be32_to_cpu(x) ___constant_swab32((x))
-#define __constant_cpu_to_be16(x) ___constant_swab16((x))
-#define __constant_be16_to_cpu(x) ___constant_swab16((x))
-#define __cpu_to_le64(x) ((__u64)(x))
-#define __le64_to_cpu(x) ((__u64)(x))
-#define __cpu_to_le32(x) ((__u32)(x))
-#define __le32_to_cpu(x) ((__u32)(x))
-#define __cpu_to_le16(x) ((__u16)(x))
-#define __le16_to_cpu(x) ((__u16)(x))
-#define __cpu_to_be64(x) __swab64((x))
-#define __be64_to_cpu(x) __swab64((x))
-#define __cpu_to_be32(x) __swab32((x))
-#define __be32_to_cpu(x) __swab32((x))
-#define __cpu_to_be16(x) __swab16((x))
-#define __be16_to_cpu(x) __swab16((x))
-#define __cpu_to_le64p(x) (*(__u64 *)(x))
-#define __le64_to_cpup(x) (*(__u64 *)(x))
-#define __cpu_to_le32p(x) (*(__u32 *)(x))
-#define __le32_to_cpup(x) (*(__u32 *)(x))
-#define __cpu_to_le16p(x) (*(__u16 *)(x))
-#define __le16_to_cpup(x) (*(__u16 *)(x))
-#define __cpu_to_be64p(x) __swab64p((x))
-#define __be64_to_cpup(x) __swab64p((x))
-#define __cpu_to_be32p(x) __swab32p((x))
-#define __be32_to_cpup(x) __swab32p((x))
-#define __cpu_to_be16p(x) __swab16p((x))
-#define __be16_to_cpup(x) __swab16p((x))
-#define __cpu_to_le64s(x) do {} while (0)
-#define __le64_to_cpus(x) do {} while (0)
-#define __cpu_to_le32s(x) do {} while (0)
-#define __le32_to_cpus(x) do {} while (0)
-#define __cpu_to_le16s(x) do {} while (0)
-#define __le16_to_cpus(x) do {} while (0)
-#define __cpu_to_be64s(x) __swab64s((x))
-#define __be64_to_cpus(x) __swab64s((x))
-#define __cpu_to_be32s(x) __swab32s((x))
-#define __be32_to_cpus(x) __swab32s((x))
-#define __cpu_to_be16s(x) __swab16s((x))
-#define __be16_to_cpus(x) __swab16s((x))
-
-#include "generic.h"
-
-#endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
-
diff --git a/drivers/staging/rtl8712/os_intfs.c b/drivers/staging/rtl8712/os_intfs.c
index 7bbd53a410e3..448f00dd68fe 100644
--- a/drivers/staging/rtl8712/os_intfs.c
+++ b/drivers/staging/rtl8712/os_intfs.c
@@ -52,7 +52,7 @@ static int lbkmode = RTL8712_AIR_TRX;
 static int hci = RTL8712_USB;
 static int ampdu_enable = 1;/*for enable tx_ampdu*/
 
-/* The video_mode variable is for vedio mode.*/
+/* The video_mode variable is for video mode.*/
 /* It may be specify when inserting module with video_mode=1 parameter.*/
 static int video_mode = 1;   /* enable video mode*/
 
@@ -248,7 +248,7 @@ static u32 start_drv_threads(struct _adapter *padapter)
 
 void r8712_stop_drv_threads(struct _adapter *padapter)
 {
-	/*Below is to termindate r8712_cmd_thread & event_thread...*/
+	/*Below is to terminate r8712_cmd_thread & event_thread...*/
 	up(&padapter->cmdpriv.cmd_queue_sema);
 	if (padapter->cmdThread)
 		_down_sema(&padapter->cmdpriv.terminate_cmdthread_sema);
diff --git a/drivers/staging/rtl8712/osdep_service.h b/drivers/staging/rtl8712/osdep_service.h
index 9ba603310fdc..f1ccc7ebbda7 100644
--- a/drivers/staging/rtl8712/osdep_service.h
+++ b/drivers/staging/rtl8712/osdep_service.h
@@ -29,7 +29,6 @@
 #define _SUCCESS	1
 #define _FAIL		0
 
-#include <linux/version.h>
 #include <linux/spinlock.h>
 
 #include <linux/interrupt.h>
@@ -107,8 +106,6 @@ static inline void _set_workitem(_workitem *pwork)
 	schedule_work(pwork);
 }
 
-#include "rtl871x_byteorder.h"
-
 #ifndef BIT
 	#define BIT(x)	(1 << (x))
 #endif
diff --git a/drivers/staging/rtl8712/rtl8712_cmd.c b/drivers/staging/rtl8712/rtl8712_cmd.c
index 9f6ebc419b0b..088647cdca99 100644
--- a/drivers/staging/rtl8712/rtl8712_cmd.c
+++ b/drivers/staging/rtl8712/rtl8712_cmd.c
@@ -50,7 +50,6 @@
 #include "drv_types.h"
 #include "recv_osdep.h"
 #include "mlme_osdep.h"
-#include "rtl871x_byteorder.h"
 #include "rtl871x_ioctl_set.h"
 
 static void check_hw_pbc(struct _adapter *padapter)
@@ -69,7 +68,7 @@ static void check_hw_pbc(struct _adapter *padapter)
 		 * After trigger PBC, the variable will be set to false */
 		DBG_8712("CheckPbcGPIO - PBC is pressed !!!!\n");
 		/* 0 is the default value and it means the application monitors
-		 * the HW PBC doesn't privde its pid to driver. */
+		 * the HW PBC doesn't provide its pid to driver. */
 		if (padapter->pid == 0)
 			return;
 		kill_pid(find_vpid(padapter->pid), SIGUSR1, 1);
@@ -382,7 +381,7 @@ _next:
 			*pcmdbuf = cpu_to_le32((cmdsz & 0x0000ffff) |
 					       (pcmd->cmdcode << 16) |
 					       (pcmdpriv->cmd_seq << 24));
-			pcmdbuf += 2 ; /* 8 bytes aligment */
+			pcmdbuf += 2 ; /* 8 bytes alignment */
 			memcpy((u8 *)pcmdbuf, pcmd->parmbuf, pcmd->cmdsz);
 			while (check_cmd_fifo(padapter, wr_sz) == _FAIL) {
 				if ((padapter->bDriverStopped == true) ||
@@ -471,7 +470,7 @@ void r8712_event_handle(struct _adapter *padapter, uint *peventbuf)
 	pevt_priv->event_seq++;	/* update evt_seq */
 	if (pevt_priv->event_seq > 127)
 		pevt_priv->event_seq = 0;
-	peventbuf = peventbuf + 2; /* move to event content, 8 bytes aligment */
+	peventbuf = peventbuf + 2; /* move to event content, 8 bytes alignment */
 	if (peventbuf) {
 		event_callback = wlanevents[evt_code].event_callback;
 		if (event_callback)
diff --git a/drivers/staging/rtl8712/rtl8712_cmd.h b/drivers/staging/rtl8712/rtl8712_cmd.h
index 766a6463266a..039ab3e97172 100644
--- a/drivers/staging/rtl8712/rtl8712_cmd.h
+++ b/drivers/staging/rtl8712/rtl8712_cmd.h
@@ -121,7 +121,7 @@ enum rtl8712_h2c_cmd {
 	GEN_CMD_CODE(_GetCurDataRate) ,
 
 	GEN_CMD_CODE(_GetTxRetrycnt),  /* to record times that Tx retry to
-					* transmmit packet after association
+					* transmit packet after association
 					*/
 	GEN_CMD_CODE(_GetRxRetrycnt),  /* to record total number of the
 					* received frame with ReTry bit set in
diff --git a/drivers/staging/rtl8712/rtl8712_efuse.c b/drivers/staging/rtl8712/rtl8712_efuse.c
index b08e9a25c9c5..377fca905801 100644
--- a/drivers/staging/rtl8712/rtl8712_efuse.c
+++ b/drivers/staging/rtl8712/rtl8712_efuse.c
@@ -417,7 +417,7 @@ u8 r8712_efuse_pg_packet_write(struct _adapter *padapter, const u8 offset,
 		} else { /* write header fail */
 			bResult = false;
 			if (0xFF == efuse_data)
-				return bResult; /* not thing damaged. */
+				return bResult; /* nothing damaged. */
 			/* call rescue procedure */
 			if (fix_header(padapter, efuse_data, efuse_addr) ==
 			    false)
diff --git a/drivers/staging/rtl8712/rtl8712_gp_bitdef.h b/drivers/staging/rtl8712/rtl8712_gp_bitdef.h
index 884a8212176d..138ea453d9df 100644
--- a/drivers/staging/rtl8712/rtl8712_gp_bitdef.h
+++ b/drivers/staging/rtl8712/rtl8712_gp_bitdef.h
@@ -70,7 +70,7 @@
 #define		GPIOSEL_BT	2	/* BT_coex*/
 #define		GPIOSEL_WLANDBG	3	/* WLANDBG*/
 #define		GPIOSEL_GPIO_MASK	(~(BIT(0)|BIT(1)))
-/* HW Readio OFF switch (GPIO BIT) */
+/* HW Radio OFF switch (GPIO BIT) */
 #define		HAL_8192S_HW_GPIO_OFF_BIT	BIT(3)
 #define		HAL_8192S_HW_GPIO_OFF_MASK	0xF7
 #define		HAL_8192S_HW_GPIO_WPS_BIT	BIT(4)
diff --git a/drivers/staging/rtl8712/rtl8712_hal.h b/drivers/staging/rtl8712/rtl8712_hal.h
index d19865a5a50c..4c51fa373b54 100644
--- a/drivers/staging/rtl8712/rtl8712_hal.h
+++ b/drivers/staging/rtl8712/rtl8712_hal.h
@@ -83,7 +83,7 @@ struct fw_priv {   /*8-bytes alignment required*/
 	unsigned char rfintfs;    /* 0:SWSI, 1:HWSI, 2:HWPI*/
 	unsigned char def_nettype;
 	unsigned char turboMode;
-	unsigned char lowPowerMode;/* 0: noral mode, 1: low power mode*/
+	unsigned char lowPowerMode;/* 0: normal mode, 1: low power mode*/
 	/*--- long word 2 ----*/
 	unsigned char lbk_mode; /*0x00: normal, 0x03: MACLBK, 0x01: PHYLBK*/
 	unsigned char mp_mode; /* 1: for MP use, 0: for normal driver */
@@ -123,7 +123,7 @@ struct fw_priv {   /*8-bytes alignment required*/
 	unsigned char rsvd053;
 };
 
-struct fw_hdr {/*8-byte alinment required*/
+struct fw_hdr {/*8-byte alignment required*/
 	unsigned short	signature;
 	unsigned short	version;	/*0x8000 ~ 0x8FFF for FPGA version,
 					 *0x0000 ~ 0x7FFF for ASIC version,*/
diff --git a/drivers/staging/rtl8712/rtl8712_led.c b/drivers/staging/rtl8712/rtl8712_led.c
index bac56e5caf12..c9eb4b74799b 100644
--- a/drivers/staging/rtl8712/rtl8712_led.c
+++ b/drivers/staging/rtl8712/rtl8712_led.c
@@ -60,7 +60,7 @@ enum _LED_STATE_871x {
 			     * the # of times to blink is depend on time
 			     * for scanning. */
 	LED_NO_LINK_BLINK = 7, /* LED is blinking during no link state. */
-	LED_BLINK_StartToBlink = 8,/* Customzied for Sercomm Printer
+	LED_BLINK_StartToBlink = 8,/* Customized for Sercomm Printer
 				    * Server case */
 	LED_BLINK_WPS = 9,	/* LED is blinkg during WPS communication */
 	LED_TXRX_BLINK = 10,
@@ -826,7 +826,7 @@ static void BlinkTimerCallback(unsigned long data)
 {
 	struct LED_871x  *pLed = (struct LED_871x *)data;
 
-	/* This fixed the crash problem on Fedora 12 when trying to do thei
+	/* This fixed the crash problem on Fedora 12 when trying to do the
 	 * insmod;ifconfig up;rmmod commands. */
 	if ((pLed->padapter->bSurpriseRemoved == true) ||
 	    (pLed->padapter->bDriverStopped == true))
@@ -836,7 +836,7 @@ static void BlinkTimerCallback(unsigned long data)
 
 /*	Description:
  *		Callback function of LED BlinkWorkItem.
- *		We dispatch acture LED blink action according to LedStrategy.
+ *		We dispatch actual LED blink action according to LedStrategy.
  */
 static void BlinkWorkItemCallback(struct work_struct *work)
 {
diff --git a/drivers/staging/rtl8712/rtl8712_recv.c b/drivers/staging/rtl8712/rtl8712_recv.c
index fa6dc9c09b3f..8e82ce2fee38 100644
--- a/drivers/staging/rtl8712/rtl8712_recv.c
+++ b/drivers/staging/rtl8712/rtl8712_recv.c
@@ -28,12 +28,13 @@
 
 #define _RTL8712_RECV_C_
 
+#include <linux/if_ether.h>
+#include <linux/ip.h>
+
 #include "osdep_service.h"
 #include "drv_types.h"
 #include "recv_osdep.h"
 #include "mlme_osdep.h"
-#include "ip.h"
-#include "if_ether.h"
 #include "ethernet.h"
 #include "usb_ops.h"
 #include "wifi.h"
@@ -459,7 +460,7 @@ void r8712_rxcmd_event_hdl(struct _adapter *padapter, void *prxcmdbuf)
 		cmd_seq = (u8)((le32_to_cpu(voffset) >> 24) & 0x7f);
 		eid = (u8)((le32_to_cpu(voffset) >> 16) & 0xff);
 		r8712_event_handle(padapter, (uint *)poffset);
-		poffset += (cmd_len + 8);/*8 bytes aligment*/
+		poffset += (cmd_len + 8);/*8 bytes alignment*/
 	} while (le32_to_cpu(voffset) & BIT(31));
 
 }
@@ -603,7 +604,7 @@ static int recv_indicatepkt_reorder(struct _adapter *padapter,
 		}
 	}
 	spin_lock_irqsave(&ppending_recvframe_queue->lock, irql);
-	/*s2. check if winstart_b(indicate_seq) needs to been updated*/
+	/*s2. check if winstart_b(indicate_seq) needs to be updated*/
 	if (!check_indicate_seq(preorder_ctrl, pattrib->seq_num))
 		goto _err_exit;
 	/*s3. Insert all packet into Reorder Queue to maintain its ordering.*/
diff --git a/drivers/staging/rtl8712/rtl8712_xmit.c b/drivers/staging/rtl8712/rtl8712_xmit.c
index 693331955d67..3d23514c0222 100644
--- a/drivers/staging/rtl8712/rtl8712_xmit.c
+++ b/drivers/staging/rtl8712/rtl8712_xmit.c
@@ -30,7 +30,6 @@
 
 #include "osdep_service.h"
 #include "drv_types.h"
-#include "rtl871x_byteorder.h"
 #include "wifi.h"
 #include "osdep_intf.h"
 #include "usb_ops.h"
diff --git a/drivers/staging/rtl8712/rtl871x_byteorder.h b/drivers/staging/rtl8712/rtl871x_byteorder.h
deleted file mode 100644
index bd3703b98bce..000000000000
--- a/drivers/staging/rtl8712/rtl871x_byteorder.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- *
- ******************************************************************************/
-#ifndef _RTL871X_BYTEORDER_H_
-#define _RTL871X_BYTEORDER_H_
-
-#if defined(__LITTLE_ENDIAN)
-#  include "little_endian.h"
-#elif defined(__BIG_ENDIAN)
-#  include "big_endian.h"
-#else
-#  error "Must be LITTLE/BIG Endian Host"
-#endif
-
-#endif /* _RTL871X_BYTEORDER_H_ */
-
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.c b/drivers/staging/rtl8712/rtl871x_cmd.c
index d77388bdba7b..659683e022b9 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.c
+++ b/drivers/staging/rtl8712/rtl871x_cmd.c
@@ -50,7 +50,6 @@
 #include "drv_types.h"
 #include "recv_osdep.h"
 #include "mlme_osdep.h"
-#include "rtl871x_byteorder.h"
 
 /*
 Caller and the r8712_cmd_thread can protect cmd_q by spin_lock.
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.h b/drivers/staging/rtl8712/rtl871x_cmd.h
index 757ebf77e9d6..9d93189d8700 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.h
+++ b/drivers/staging/rtl8712/rtl871x_cmd.h
@@ -720,7 +720,7 @@ struct DisconnectCtrlEx_param {
  * Result:
  * 0x00: success
  * 0x01: success, and check Response.
- * 0x02: cmd ignored due to duplicated sequcne number
+ * 0x02: cmd ignored due to duplicated sequence number
  * 0x03: cmd dropped due to invalid cmd code
  * 0x04: reserved.
  */
diff --git a/drivers/staging/rtl8712/rtl871x_io.h b/drivers/staging/rtl8712/rtl871x_io.h
index d3d8727c2ec5..dc23395fec3b 100644
--- a/drivers/staging/rtl8712/rtl871x_io.h
+++ b/drivers/staging/rtl8712/rtl871x_io.h
@@ -117,7 +117,7 @@ struct io_req {
 	u32	command;
 	u32	status;
 	u8	*pbuf;
-	void (*_async_io_callback)(struct _adapter *padater,
+	void (*_async_io_callback)(struct _adapter *padapter,
 				   struct io_req *pio_req, u8 *cnxt);
 	u8 *cnxt;
 };
diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index ef35bc29a3fa..35e781fca4a0 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -43,7 +43,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/io.h>
 #include <linux/semaphore.h>
 #include <net/iw_handler.h>
@@ -242,7 +241,7 @@ static inline char *translate_scan(struct _adapter *padapter,
 	/* Add frequency/channel */
 	iwe.cmd = SIOCGIWFREQ;
 	{
-		/*  check legel index */
+		/*  check legal index */
 		u8 dsconfig = pnetwork->network.Configuration.DSConfig;
 		if (dsconfig >= 1 && dsconfig <= sizeof(
 		    ieee80211_wlan_frequencies) / sizeof(long))
@@ -810,11 +809,11 @@ static int r871x_wx_set_pmkid(struct net_device *dev,
 
 /*
 	There are the BSSID information in the bssid.sa_data array.
-	If cmd is IW_PMKSA_FLUSH, it means the wpa_suppplicant wants to clear
-	 all the PMKID information. If cmd is IW_PMKSA_ADD, it means the
-	  wpa_supplicant wants to add a PMKID/BSSID to driver.
+	If cmd is IW_PMKSA_FLUSH, it means the wpa_supplicant wants to clear
+	all the PMKID information. If cmd is IW_PMKSA_ADD, it means the
+	wpa_supplicant wants to add a PMKID/BSSID to driver.
 	If cmd is IW_PMKSA_REMOVE, it means the wpa_supplicant wants to
-	  remove a PMKID/BSSID from driver.
+	remove a PMKID/BSSID from driver.
 */
 	if (pPMK == NULL)
 		return -EINVAL;
@@ -924,7 +923,7 @@ static int r8711_wx_get_range(struct net_device *dev,
 	range->max_qual.noise = 100;
 	range->max_qual.updated = 7; /* Updated all three */
 	range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
-	/* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+	/* TODO: Find real 'good' to 'bad' threshold value for RSSI */
 	range->avg_qual.level = 20 + -98;
 	range->avg_qual.noise = 0;
 	range->avg_qual.updated = 7; /* Updated all three */
@@ -1071,7 +1070,7 @@ FREE_EXT:
  * MAC# of a preferred Access Point.
  * Currently, the request comes via Wireless Extensions' SIOCSIWAP ioctl.
  *
- * For this operation to succeed, there is no need for the interface to be Up.
+ * For this operation to succeed, there is no need for the interface to be up.
  *
  */
 static int r8711_wx_set_wap(struct net_device *dev,
@@ -2389,10 +2388,10 @@ static struct iw_statistics *r871x_get_wireless_stats(struct net_device *dev)
 
 struct iw_handler_def r871x_handlers_def = {
 	.standard = r8711_handlers,
-	.num_standard = sizeof(r8711_handlers) / sizeof(iw_handler),
+	.num_standard = ARRAY_SIZE(r8711_handlers),
 	.private = r8711_private_handler,
 	.private_args = (struct iw_priv_args *)r8711_private_args,
-	.num_private = sizeof(r8711_private_handler) / sizeof(iw_handler),
+	.num_private = ARRAY_SIZE(r8711_private_handler),
 	.num_private_args = sizeof(r8711_private_args) /
 			    sizeof(struct iw_priv_args),
 	.get_wireless_stats = r871x_get_wireless_stats
diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_set.c b/drivers/staging/rtl8712/rtl871x_ioctl_set.c
index fb29b423752f..f352b32355a0 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_set.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_set.c
@@ -264,7 +264,7 @@ void r8712_set_802_11_infrastructure_mode(struct _adapter *padapter,
 		    (*pold_state == Ndis802_11Infrastructure) ||
 		    (*pold_state == Ndis802_11IBSS)) {
 			/* will clr Linked_state before this function,
-			 * we must have chked whether issue dis-assoc_cmd or
+			 * we must have checked whether issue dis-assoc_cmd or
 			 * not */
 			r8712_ind_disconnect(padapter);
 		}
diff --git a/drivers/staging/rtl8712/rtl871x_mlme.c b/drivers/staging/rtl8712/rtl871x_mlme.c
index 4277d0304b7a..dc7adc132d12 100644
--- a/drivers/staging/rtl8712/rtl871x_mlme.c
+++ b/drivers/staging/rtl8712/rtl871x_mlme.c
@@ -137,7 +137,7 @@ static void _free_network_nolock(struct mlme_priv *pmlmepriv,
 
 /*
 	return the wlan_network with the matching addr
-	Shall be calle under atomic context...
+	Shall be called under atomic context...
 	to avoid possible racing condition...
 */
 static struct wlan_network *_r8712_find_network(struct  __queue *scanned_queue,
@@ -255,7 +255,7 @@ void r8712_free_network_queue(struct _adapter *dev)
 /*
 	return the wlan_network with the matching addr
 
-	Shall be calle under atomic context...
+	Shall be called under atomic context...
 	to avoid possible racing condition...
 */
 static struct wlan_network *r8712_find_network(struct  __queue *scanned_queue,
@@ -1037,7 +1037,7 @@ void r8712_cpwm_event_callback(struct _adapter *adapter, u8 *pbuf)
  *	 and the WiFi client will drop the data with seq number 0.
  *	So, the 8712 firmware has to inform driver with receiving the
  *	 ADDBA-Req frame so that the driver can reset the
- *	sequence value of Rx reorder contorl.
+ *	sequence value of Rx reorder control.
  */
 void r8712_got_addbareq_event_callback(struct _adapter *adapter, u8 *pbuf)
 {
@@ -1775,7 +1775,7 @@ static void update_ht_cap(struct _adapter *padapter, u8 *pie, uint ie_len)
 		phtpriv->rx_ampdu_maxlen = max_ampdu_sz;
 	}
 	/* for A-MPDU Rx reordering buffer control for bmc_sta & sta_info
-	 * if A-MPDU Rx is enabled, reseting rx_ordering_ctrl
+	 * if A-MPDU Rx is enabled, resetting rx_ordering_ctrl
 	 * wstart_b(indicate_seq) to default value=0xffff
 	 * todo: check if AP can send A-MPDU packets
 	 */
diff --git a/drivers/staging/rtl8712/rtl871x_mlme.h b/drivers/staging/rtl8712/rtl871x_mlme.h
index 71ca01350b5e..42bd0bf8a816 100644
--- a/drivers/staging/rtl8712/rtl871x_mlme.h
+++ b/drivers/staging/rtl8712/rtl871x_mlme.h
@@ -69,8 +69,8 @@ since mlme_priv is a shared resource between many threads,
 like ISR/Call-Back functions, the OID handlers, and even timer functions.
 Each _queue has its own locks, already.
 Other items are protected by mlme_priv.lock.
-To avoid possible dead lock, any thread trying to modifiying mlme_priv
-SHALL not lock up more than one locks at a time!
+To avoid possible dead lock, any thread trying to modify mlme_priv
+SHALL not lock up more than one lock at a time!
 */
 
 #define traffic_threshold	10
@@ -132,7 +132,7 @@ static inline sint get_fwstate(struct mlme_priv *pmlmepriv)
  * therefore set it to be the critical section...
  *
  * ### NOTE:#### (!!!!)
- * TAKE CARE THAT BEFORE CALLING THIS FUNC, LOCK pmlmepriv->lock
+ * TAKE CARE BEFORE CALLING THIS FUNC, LOCK pmlmepriv->lock
  */
 static inline void set_fwstate(struct mlme_priv *pmlmepriv, sint state)
 {
diff --git a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
index 23532a793859..8e2586231ffd 100644
--- a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
+++ b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
@@ -184,7 +184,7 @@
 
 /*RxIQ DC offset, Rx digital filter, DC notch filter */
 #define	rOFDM0_XARxAFE			0xc10
-#define	rOFDM0_XARxIQImbalance		0xc14  /* RxIQ imblance matrix */
+#define	rOFDM0_XARxIQImbalance		0xc14  /* RxIQ imbalance matrix */
 #define	rOFDM0_XBRxAFE			0xc18
 #define	rOFDM0_XBRxIQImbalance		0xc1c
 #define	rOFDM0_XCRxAFE			0xc20
@@ -603,7 +603,7 @@
 #define	bCCKRxIG		0x7f00
 #define	bCCKLNAPolarity		0x800000
 #define	bCCKRx1stGain		0x7f0000
-#define	bCCKRFExtend		0x20000000 /* CCK Rx Iinital gain polarity */
+#define	bCCKRFExtend		0x20000000 /* CCK Rx inital gain polarity */
 #define	bCCKRxAGCSatLevel	0x1f000000
 #define	bCCKRxAGCSatCount       0xe0
 #define	bCCKRxRFSettle          0x1f       /* AGCsamp_dly */
diff --git a/drivers/staging/rtl8712/rtl871x_recv.c b/drivers/staging/rtl8712/rtl871x_recv.c
index 5b03b405883e..c9d1743e5c5d 100644
--- a/drivers/staging/rtl8712/rtl871x_recv.c
+++ b/drivers/staging/rtl8712/rtl871x_recv.c
@@ -28,15 +28,15 @@
 
 #define _RTL871X_RECV_C_
 
+#include <linux/ip.h>
 #include <linux/slab.h>
+#include <linux/if_ether.h>
 #include <linux/kmemleak.h>
 
 #include "osdep_service.h"
 #include "drv_types.h"
 #include "recv_osdep.h"
 #include "mlme_osdep.h"
-#include "ip.h"
-#include "if_ether.h"
 #include "ethernet.h"
 #include "usb_ops.h"
 #include "wifi.h"
diff --git a/drivers/staging/rtl8712/rtl871x_xmit.c b/drivers/staging/rtl8712/rtl871x_xmit.c
index aa57e7754f04..78f570b571a7 100644
--- a/drivers/staging/rtl8712/rtl871x_xmit.c
+++ b/drivers/staging/rtl8712/rtl871x_xmit.c
@@ -30,7 +30,6 @@
 
 #include "osdep_service.h"
 #include "drv_types.h"
-#include "rtl871x_byteorder.h"
 #include "wifi.h"
 #include "osdep_intf.h"
 #include "usb_ops.h"
@@ -72,7 +71,7 @@ sint _r8712_init_xmit_priv(struct xmit_priv *pxmitpriv,
 	memset((unsigned char *)pxmitpriv, 0, sizeof(struct xmit_priv));
 	spin_lock_init(&pxmitpriv->lock);
 	/*
-	Please insert all the queue initializaiton using _init_queue below
+	Please insert all the queue initialization using _init_queue below
 	*/
 	pxmitpriv->adapter = padapter;
 	_init_queue(&pxmitpriv->be_pending);
diff --git a/drivers/staging/rtl8712/rtl871x_xmit.h b/drivers/staging/rtl8712/rtl871x_xmit.h
index 638b79b4c5a8..ee906987735a 100644
--- a/drivers/staging/rtl8712/rtl871x_xmit.h
+++ b/drivers/staging/rtl8712/rtl871x_xmit.h
@@ -119,7 +119,7 @@ struct pkt_attrib {
 
 	u8	priority;
 	u8	encrypt;	/* when 0 indicate no encrypt. when non-zero,
-				 * indicate the encrypt algorith*/
+				 * indicate the encrypt algorithm*/
 	u8	iv_len;
 	u8	icv_len;
 	unsigned char iv[8];
diff --git a/drivers/staging/rtl8712/swab.h b/drivers/staging/rtl8712/swab.h
deleted file mode 100644
index f12781829c1b..000000000000
--- a/drivers/staging/rtl8712/swab.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * Modifications for inclusion into the Linux staging tree are
- * Copyright(c) 2010 Larry Finger. All rights reserved.
- *
- * Contact information:
- * WLAN FAE <wlanfae@realtek.com>
- * Larry Finger <Larry.Finger@lwfinger.net>
- *
- ******************************************************************************/
-#ifndef _LINUX_BYTEORDER_SWAB_H
-#define _LINUX_BYTEORDER_SWAB_H
-
-#ifndef __u16
- #define __u16 unsigned short
-#endif
-
-#ifndef __u32
- #define __u32 unsigned int
-#endif
-
-#ifndef __u8
- #define __u8 unsigned char
-#endif
-
-#ifndef __u64
- #define __u64 unsigned long long
-#endif
-
-
-static inline __u16  ___swab16(__u16 x)
-{
-	__u16 __x = x;
-	return (__u16)(
-		(((__u16)(__x) & (__u16)0x00ffU) << 8) |
-		(((__u16)(__x) & (__u16)0xff00U) >> 8));
-
-}
-
-static inline __u32  ___swab32(__u32 x)
-{
-	__u32 __x = (x);
-	return (__u32)(
-		(((__u32)(__x) & (__u32)0x000000ffUL) << 24) |
-		(((__u32)(__x) & (__u32)0x0000ff00UL) <<  8) |
-		(((__u32)(__x) & (__u32)0x00ff0000UL) >>  8) |
-		(((__u32)(__x) & (__u32)0xff000000UL) >> 24));
-}
-
-static inline __u64  ___swab64(__u64 x)
-{
-	__u64 __x = (x);
-
-	return (__u64)( \
-		(__u64)(((__u64)(__x) & (__u64)0x00000000000000ffULL) << 56) | \
-		(__u64)(((__u64)(__x) & (__u64)0x000000000000ff00ULL) << 40) | \
-		(__u64)(((__u64)(__x) & (__u64)0x0000000000ff0000ULL) << 24) | \
-		(__u64)(((__u64)(__x) & (__u64)0x00000000ff000000ULL) <<  8) | \
-		(__u64)(((__u64)(__x) & (__u64)0x000000ff00000000ULL) >>  8) | \
-		(__u64)(((__u64)(__x) & (__u64)0x0000ff0000000000ULL) >> 24) | \
-		(__u64)(((__u64)(__x) & (__u64)0x00ff000000000000ULL) >> 40) | \
-		(__u64)(((__u64)(__x) & (__u64)0xff00000000000000ULL) >> 56));
-}
-
-#ifndef __arch__swab16
-static inline __u16 __arch__swab16(__u16 x)
-{
-	return ___swab16(x);
-}
-
-#endif
-
-#ifndef __arch__swab32
-static inline __u32 __arch__swab32(__u32 x)
-{
-	__u32 __tmp = (x) ;
-	return ___swab32(__tmp);
-}
-#endif
-
-#ifndef __arch__swab64
-
-static inline __u64 __arch__swab64(__u64 x)
-{
-	__u64 __tmp = (x) ;
-	return ___swab64(__tmp);
-}
-
-
-#endif
-
-#define __swab16(x) __fswab16(x)
-#define __swab32(x) __fswab32(x)
-#define __swab64(x) __fswab64(x)
-
-static inline const __u16 __fswab16(__u16 x)
-{
-	return __arch__swab16(x);
-}
-static inline const __u32 __fswab32(__u32 x)
-{
-	return __arch__swab32(x);
-}
-
-#define swab16 __swab16
-#define swab32 __swab32
-#define swab64 __swab64
-#define swab16p __swab16p
-#define swab32p __swab32p
-#define swab64p __swab64p
-#define swab16s __swab16s
-#define swab32s __swab32s
-#define swab64s __swab64s
-
-#endif /* _LINUX_BYTEORDER_SWAB_H */
-
diff --git a/drivers/staging/rtl8712/usb_halinit.c b/drivers/staging/rtl8712/usb_halinit.c
index 46287c17a417..b4ae11a78b46 100644
--- a/drivers/staging/rtl8712/usb_halinit.c
+++ b/drivers/staging/rtl8712/usb_halinit.c
@@ -141,7 +141,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter)
 		/* Enable AFE PLL Macro Block */
 		val8 = r8712_read8(padapter, AFE_PLL_CTRL);
 		r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11));
-		/* Attatch AFE PLL to MACTOP/BB/PCIe Digital */
+		/* Attach AFE PLL to MACTOP/BB/PCIe Digital */
 		val8 = r8712_read8(padapter, SYS_ISO_CTRL);
 		r8712_write8(padapter, SYS_ISO_CTRL, (val8 & 0xEE));
 		/* Switch to 40M clock */
@@ -234,7 +234,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter)
 		udelay(500);
 		r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11));
 		udelay(500);
-		/* Attatch AFE PLL to MACTOP/BB/PCIe Digital */
+		/* Attach AFE PLL to MACTOP/BB/PCIe Digital */
 		val8 = r8712_read8(padapter, SYS_ISO_CTRL);
 		r8712_write8(padapter, SYS_ISO_CTRL, (val8 & 0xEE));
 		/* Switch to 40M clock */
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index e419b4fd82b9..9bd18e2d0513 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -621,30 +621,28 @@ static void r871xu_dev_remove(struct usb_interface *pusb_intf)
 	struct usb_device *udev = interface_to_usbdev(pusb_intf);
 
 	usb_set_intfdata(pusb_intf, NULL);
-	if (padapter) {
-		if (padapter->fw_found)
-			release_firmware(padapter->fw);
-		/* never exit with a firmware callback pending */
-		wait_for_completion(&padapter->rtl8712_fw_ready);
-		if (drvpriv.drv_registered == true)
-			padapter->bSurpriseRemoved = true;
-		if (pnetdev != NULL) {
-			/* will call netdev_close() */
-			unregister_netdev(pnetdev);
-		}
-		flush_scheduled_work();
-		udelay(1);
-		/*Stop driver mlme relation timer */
-		if (padapter->fw_found)
-			r8712_stop_drv_timers(padapter);
-		r871x_dev_unload(padapter);
-		r8712_free_drv_sw(padapter);
+	if (padapter->fw_found)
+		release_firmware(padapter->fw);
+	/* never exit with a firmware callback pending */
+	wait_for_completion(&padapter->rtl8712_fw_ready);
+	if (drvpriv.drv_registered == true)
+		padapter->bSurpriseRemoved = true;
+	if (pnetdev != NULL) {
+		/* will call netdev_close() */
+		unregister_netdev(pnetdev);
 	}
+	flush_scheduled_work();
+	udelay(1);
+	/*Stop driver mlme relation timer */
+	if (padapter->fw_found)
+		r8712_stop_drv_timers(padapter);
+	r871x_dev_unload(padapter);
+	r8712_free_drv_sw(padapter);
 	usb_set_intfdata(pusb_intf, NULL);
 	/* decrease the reference count of the usb device structure
 	 * when disconnect */
 	usb_put_dev(udev);
-	/* If we didn't unplug usb dongle and remove/insert modlue, driver
+	/* If we didn't unplug usb dongle and remove/insert module, driver
 	 * fails on sitesurvey for the first time when device is up.
 	 * Reset usb port for sitesurvey fail issue. */
 	if (udev->state != USB_STATE_NOTATTACHED)
diff --git a/drivers/staging/rtl8712/usb_ops.c b/drivers/staging/rtl8712/usb_ops.c
index 5a8b0ebd0b79..c03508d935f2 100644
--- a/drivers/staging/rtl8712/usb_ops.c
+++ b/drivers/staging/rtl8712/usb_ops.c
@@ -33,7 +33,6 @@
 #include "osdep_intf.h"
 #include "usb_ops.h"
 #include "recv_osdep.h"
-#include "rtl871x_byteorder.h"
 
 static u8 usb_read8(struct intf_hdl *pintfhdl, u32 addr)
 {
diff --git a/drivers/staging/rtl8712/wifi.h b/drivers/staging/rtl8712/wifi.h
index 277398cff0a7..793443e758ac 100644
--- a/drivers/staging/rtl8712/wifi.h
+++ b/drivers/staging/rtl8712/wifi.h
@@ -26,7 +26,6 @@
 #ifndef _WIFI_H_
 #define _WIFI_H_
 
-#include "rtl871x_byteorder.h"
 #include <linux/compiler.h>
 
 #ifdef BIT
diff --git a/drivers/staging/rtl8712/xmit_linux.c b/drivers/staging/rtl8712/xmit_linux.c
index c9703627c8f5..65542cb7168f 100644
--- a/drivers/staging/rtl8712/xmit_linux.c
+++ b/drivers/staging/rtl8712/xmit_linux.c
@@ -29,14 +29,12 @@
 #define _XMIT_OSDEP_C_
 
 #include <linux/usb.h>
+#include <linux/ip.h>
+#include <linux/if_ether.h>
 
 #include "osdep_service.h"
 #include "drv_types.h"
 
-
-#include "if_ether.h"
-#include "ip.h"
-#include "rtl871x_byteorder.h"
 #include "wifi.h"
 #include "mlme_osdep.h"
 #include "xmit_osdep.h"
diff --git a/drivers/staging/rts5139/ms.c b/drivers/staging/rts5139/ms.c
index b0e9071c8e52..6eef33b03f55 100644
--- a/drivers/staging/rts5139/ms.c
+++ b/drivers/staging/rts5139/ms.c
@@ -2680,7 +2680,7 @@ static int mspro_set_rw_cmd(struct rts51x_chip *chip, u32 start_sec,
 	return STATUS_SUCCESS;
 }
 
-void mspro_stop_seq_mode(struct rts51x_chip *chip)
+static void mspro_stop_seq_mode(struct rts51x_chip *chip)
 {
 	struct ms_info *ms_card = &(chip->ms_card);
 	int retval;
@@ -3149,7 +3149,7 @@ Fail:
 		TRACE_RET(chip, STATUS_FAIL);
 
 	sec_cnt = chip->rsp_buf[0];
-	RTS51X_DEBUGP("%d pages need be trasferred, %d pages remained\n",
+	RTS51X_DEBUGP("%d pages need be transferred, %d pages remained\n",
 		       (int)page_cnt, (int)sec_cnt);
 	page_addr = start_page + (page_cnt - sec_cnt);
 
@@ -3864,7 +3864,7 @@ static int ms_rw_multi_sector(struct scsi_cmnd *srb, struct rts51x_chip *chip,
 	log_blk = (u16) (start_sector >> ms_card->block_shift);
 	start_page = (u8) (start_sector & ms_card->page_off);
 
-	for (seg_no = 0; seg_no < sizeof(ms_start_idx) / 2; seg_no++) {
+	for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1; seg_no++) {
 		if (log_blk < ms_start_idx[seg_no + 1])
 			break;
 	}
@@ -4020,7 +4020,8 @@ static int ms_rw_multi_sector(struct scsi_cmnd *srb, struct rts51x_chip *chip,
 
 		log_blk++;
 
-		for (seg_no = 0; seg_no < sizeof(ms_start_idx) / 2; seg_no++) {
+		for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1;
+				seg_no++) {
 			if (log_blk < ms_start_idx[seg_no + 1])
 				break;
 		}
@@ -4134,7 +4135,7 @@ void ms_cleanup_work(struct rts51x_chip *chip)
 	}
 }
 
-int ms_power_off_card3v3(struct rts51x_chip *chip)
+static int ms_power_off_card3v3(struct rts51x_chip *chip)
 {
 	int retval;
 
diff --git a/drivers/staging/rts5139/ms.h b/drivers/staging/rts5139/ms.h
index 3ce1dc90f19d..0321d06e776d 100644
--- a/drivers/staging/rts5139/ms.h
+++ b/drivers/staging/rts5139/ms.h
@@ -234,7 +234,6 @@
 void mspro_polling_format_status(struct rts51x_chip *chip);
 void mspro_format_sense(struct rts51x_chip *chip, unsigned int lun);
 
-void mspro_stop_seq_mode(struct rts51x_chip *chip);
 int reset_ms_card(struct rts51x_chip *chip);
 int ms_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
 	  u16 sector_cnt);
@@ -242,7 +241,6 @@ int mspro_format(struct scsi_cmnd *srb, struct rts51x_chip *chip,
 		 int short_data_len, int quick_format);
 void ms_free_l2p_tbl(struct rts51x_chip *chip);
 void ms_cleanup_work(struct rts51x_chip *chip);
-int ms_power_off_card3v3(struct rts51x_chip *chip);
 int release_ms_card(struct rts51x_chip *chip);
 int ms_delay_write(struct rts51x_chip *chip);
 
diff --git a/drivers/staging/rts5139/ms_mg.c b/drivers/staging/rts5139/ms_mg.c
index 154b5230aa5e..057d96c1a937 100644
--- a/drivers/staging/rts5139/ms_mg.c
+++ b/drivers/staging/rts5139/ms_mg.c
@@ -38,7 +38,7 @@
 
 #ifdef SUPPORT_MAGIC_GATE
 
-int mg_check_int_error(struct rts51x_chip *chip)
+static int mg_check_int_error(struct rts51x_chip *chip)
 {
 	u8 value;
 
@@ -444,7 +444,7 @@ int mg_rsp(struct scsi_cmnd *srb, struct rts51x_chip *chip)
   *
   * Since the extra 4 bytes data is just only a prefix to original data
   * that read from medium, so that the 4-byte data pushed into Ring buffer
-  * precedes data tramsinssion from medium to Ring buffer by DMA mechanisim
+  * precedes data transmission from medium to Ring buffer by DMA mechanism
   * in order to get maximum performance and minimum code size simultaneously.
   */
 int mg_get_ICV(struct scsi_cmnd *srb, struct rts51x_chip *chip)
diff --git a/drivers/staging/rts5139/rts51x.c b/drivers/staging/rts5139/rts51x.c
index 2b9f785954df..c3fe7dda1f4e 100644
--- a/drivers/staging/rts5139/rts51x.c
+++ b/drivers/staging/rts5139/rts51x.c
@@ -56,12 +56,6 @@ MODULE_DESCRIPTION(RTS51X_DESC);
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRIVER_VERSION);
 
-#ifdef SCSI_SCAN_DELAY
-static unsigned int delay_use = 5;
-module_param(delay_use, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
-#endif
-
 static int auto_delink_en;
 module_param(auto_delink_en, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(auto_delink_en, "enable auto delink");
@@ -114,7 +108,7 @@ static inline void usb_autopm_disable(struct usb_interface *intf)
 	usb_autopm_get_interface(intf);
 }
 
-void rts51x_try_to_enter_ss(struct rts51x_chip *chip)
+static void rts51x_try_to_enter_ss(struct rts51x_chip *chip)
 {
 	RTS51X_DEBUGP("Ready to enter SS state\n");
 	usb_autopm_enable(chip->usb->pusb_intf);
@@ -207,7 +201,7 @@ int rts51x_reset_resume(struct usb_interface *iface)
 
 #else /* CONFIG_PM */
 
-void rts51x_try_to_enter_ss(struct rts51x_chip *chip)
+static void rts51x_try_to_enter_ss(struct rts51x_chip *chip)
 {
 }
 
@@ -364,11 +358,6 @@ static int rts51x_polling_thread(void *__chip)
 {
 	struct rts51x_chip *chip = (struct rts51x_chip *)__chip;
 
-#ifdef SCSI_SCAN_DELAY
-	/* Wait until SCSI scan finished */
-	wait_timeout((delay_use + 5) * HZ);
-#endif
-
 	for (;;) {
 		wait_timeout(POLLING_INTERVAL);
 
@@ -432,38 +421,6 @@ static int rts51x_polling_thread(void *__chip)
 	return 0;
 }
 
-#ifdef SCSI_SCAN_DELAY
-/* Thread to carry out delayed SCSI-device scanning */
-static int rts51x_scan_thread(void *__chip)
-{
-	struct rts51x_chip *chip = (struct rts51x_chip *)__chip;
-
-	printk(KERN_DEBUG
-	       "rts51x: device found at %d\n", chip->usb->pusb_dev->devnum);
-
-	set_freezable();
-	/* Wait for the timeout to expire or for a disconnect */
-	if (delay_use > 0) {
-		printk(KERN_DEBUG "rts51x: waiting for device "
-		       "to settle before scanning\n");
-		wait_event_freezable_timeout(chip->usb->delay_wait,
-					     test_bit(FLIDX_DONT_SCAN,
-						      &chip->usb->dflags),
-					     delay_use * HZ);
-	}
-
-	/* If the device is still connected, perform the scanning */
-	if (!test_bit(FLIDX_DONT_SCAN, &chip->usb->dflags)) {
-		scsi_scan_host(rts51x_to_host(chip));
-		printk(KERN_DEBUG "rts51x: device scan complete\n");
-
-		/* Should we unbind if no devices were detected? */
-	}
-
-	complete_and_exit(&chip->usb->scanning_done, 0);
-}
-#endif
-
 /* Associate our private data with the USB device */
 static int associate_dev(struct rts51x_chip *chip, struct usb_interface *intf)
 {
@@ -521,7 +478,6 @@ static void rts51x_init_options(struct rts51x_chip *chip)
 {
 	struct rts51x_option *option = &(chip->option);
 
-	option->led_blink_speed = 7;
 	option->mspro_formatter_enable = 1;
 
 	option->fpga_sd_sdr104_clk = CLK_100;
@@ -549,7 +505,6 @@ static void rts51x_init_options(struct rts51x_chip *chip)
 
 	option->ss_en = ss_en;
 	option->ss_delay = ss_delay;
-	option->needs_remote_wakeup = needs_remote_wakeup;
 
 	option->auto_delink_en = auto_delink_en;
 
@@ -561,10 +516,7 @@ static void rts51x_init_options(struct rts51x_chip *chip)
 	option->rts5129_D3318_off_enable = 0;
 	option->sd20_pad_drive = 0;
 	option->reset_or_rw_fail_set_pad_drive = 1;
-	option->rcc_fail_flag = 0;
-	option->rcc_bug_fix_en = 1;
 	option->debounce_num = 2;
-	option->polling_time = 100;
 	option->led_toggle_interval = 6;
 	option->xd_rwn_step = 0;
 	option->sd_send_status_en = 0;
@@ -737,15 +689,6 @@ static void quiesce_and_remove_host(struct rts51x_chip *chip)
 	if (rts51x->pusb_dev->state == USB_STATE_NOTATTACHED)
 		set_bit(FLIDX_DISCONNECTING, &rts51x->dflags);
 
-#ifdef SCSI_SCAN_DELAY
-	/* Prevent SCSI-scanning (if it hasn't started yet)
-	 * and wait for the SCSI-scanning thread to stop.
-	 */
-	set_bit(FLIDX_DONT_SCAN, &rts51x->dflags);
-	wake_up(&rts51x->delay_wait);
-	wait_for_completion(&rts51x->scanning_done);
-#endif
-
 	/* Removing the host will perform an orderly shutdown: caches
 	 * synchronized, disks spun down, etc.
 	 */
@@ -757,9 +700,6 @@ static void quiesce_and_remove_host(struct rts51x_chip *chip)
 	scsi_lock(host);
 	set_bit(FLIDX_DISCONNECTING, &rts51x->dflags);
 	scsi_unlock(host);
-#ifdef SCSI_SCAN_DELAY
-	wake_up(&rts51x->delay_wait);
-#endif
 }
 
 /* Second stage of disconnect processing: deallocate all resources */
@@ -818,10 +758,6 @@ static int rts51x_probe(struct usb_interface *intf,
 	init_completion(&rts51x->control_exit);
 	init_completion(&rts51x->polling_exit);
 	init_completion(&(rts51x->notify));
-#ifdef SCSI_SCAN_DELAY
-	init_waitqueue_head(&rts51x->delay_wait);
-	init_completion(&rts51x->scanning_done);
-#endif
 
 	chip->usb = rts51x;
 
@@ -855,22 +791,7 @@ static int rts51x_probe(struct usb_interface *intf,
 		printk(KERN_WARNING RTS51X_TIP "Unable to add the scsi host\n");
 		goto BadDevice;
 	}
-#ifdef SCSI_SCAN_DELAY
-	/* Start up the thread for delayed SCSI-device scanning */
-	th = kthread_create(rts51x_scan_thread, chip, RTS51X_SCAN_THREAD);
-	if (IS_ERR(th)) {
-		printk(KERN_WARNING RTS51X_TIP
-		       "Unable to start the device-scanning thread\n");
-		complete(&rts51x->scanning_done);
-		quiesce_and_remove_host(chip);
-		result = PTR_ERR(th);
-		goto BadDevice;
-	}
-
-	wake_up_process(th);
-#else
 	scsi_scan_host(rts51x_to_host(chip));
-#endif
 
 	/* Start up our polling thread */
 	th = kthread_run(rts51x_polling_thread, chip, RTS51X_POLLING_THREAD);
diff --git a/drivers/staging/rts5139/rts51x.h b/drivers/staging/rts5139/rts51x.h
index b2c58390bfc5..ecc0109a5b1a 100644
--- a/drivers/staging/rts5139/rts51x.h
+++ b/drivers/staging/rts5139/rts51x.h
@@ -47,11 +47,9 @@
 #define RTS51X_DESC		"Realtek RTS5139/29 USB card reader driver"
 #define RTS51X_NAME		"rts5139"
 #define RTS51X_CTL_THREAD	"rts5139-control"
-#define RTS51X_SCAN_THREAD	"rts5139-scan"
 #define RTS51X_POLLING_THREAD	"rts5139-polling"
 
 #define POLLING_IN_THREAD
-/* #define SCSI_SCAN_DELAY */
 #define SUPPORT_FILE_OP
 
 #define wait_timeout_x(task_state, msecs)	\
@@ -66,8 +64,6 @@ do {						\
 
 /* Size of the DMA-mapped I/O buffer */
 #define RTS51X_IOBUF_SIZE	1024
-/* Size of the autosense data buffer */
-#define RTS51X_SENSE_SIZE	18
 
 /* Dynamic bitflag definitions (dflags): used in set_bit() etc. */
 #define FLIDX_URB_ACTIVE	0	/* current_urb is in use    */
@@ -76,7 +72,6 @@ do {						\
 #define FLIDX_DISCONNECTING	3	/* disconnect in progress   */
 #define FLIDX_RESETTING		4	/* device reset in progress */
 #define FLIDX_TIMED_OUT		5	/* SCSI midlayer timed out  */
-#define FLIDX_DONT_SCAN		6	/* don't scan (disconnect)  */
 
 struct rts51x_chip;
 
@@ -116,10 +111,6 @@ struct rts51x_usb {
 	struct completion control_exit;	/* control thread exit     */
 	struct completion polling_exit;	/* polling thread exit     */
 	struct completion notify;	/* thread begin/end        */
-#ifdef SCSI_SCAN_DELAY
-	wait_queue_head_t delay_wait;	/* wait during scan, reset */
-	struct completion scanning_done;	/* wait for scan thread    */
-#endif
 };
 
 extern struct usb_driver rts51x_driver;
@@ -188,7 +179,6 @@ enum xfer_buf_dir { TO_XFER_BUF, FROM_XFER_BUF };
 
 /* General routines provided by the usb-storage standard core */
 #ifdef CONFIG_PM
-void rts51x_try_to_enter_ss(struct rts51x_chip *chip);
 void rts51x_try_to_exit_ss(struct rts51x_chip *chip);
 int rts51x_suspend(struct usb_interface *iface, pm_message_t message);
 int rts51x_resume(struct usb_interface *iface);
diff --git a/drivers/staging/rts5139/rts51x_card.c b/drivers/staging/rts5139/rts51x_card.c
index 424a84581b86..4192c3bac12f 100644
--- a/drivers/staging/rts5139/rts51x_card.c
+++ b/drivers/staging/rts5139/rts51x_card.c
@@ -37,7 +37,6 @@
 #include "rts51x_chip.h"
 #include "rts51x_card.h"
 #include "rts51x_transport.h"
-#include "rts51x_sys.h"
 #include "xd.h"
 #include "sd.h"
 #include "ms.h"
@@ -94,7 +93,7 @@ void do_remaining_work(struct rts51x_chip *chip)
 		ms_cleanup_work(chip);
 }
 
-void do_reset_xd_card(struct rts51x_chip *chip)
+static void do_reset_xd_card(struct rts51x_chip *chip)
 {
 	int retval;
 
@@ -148,7 +147,7 @@ void do_reset_sd_card(struct rts51x_chip *chip)
 	}
 }
 
-void do_reset_ms_card(struct rts51x_chip *chip)
+static void do_reset_ms_card(struct rts51x_chip *chip)
 {
 	int retval;
 
@@ -175,7 +174,7 @@ void do_reset_ms_card(struct rts51x_chip *chip)
 	}
 }
 
-void card_cd_debounce(struct rts51x_chip *chip, u8 *need_reset,
+static void card_cd_debounce(struct rts51x_chip *chip, u8 *need_reset,
 		      u8 *need_release)
 {
 	int retval;
@@ -191,7 +190,6 @@ void card_cd_debounce(struct rts51x_chip *chip, u8 *need_reset,
 		goto Exit_Debounce;
 
 	if (chip->card_exist) {
-		rts51x_clear_start_time(chip);
 		retval = rts51x_read_register(chip, CARD_INT_PEND, &value);
 		if (retval != STATUS_SUCCESS) {
 			rts51x_ep0_write_register(chip, MC_FIFO_CTL, FIFO_FLUSH,
@@ -214,17 +212,11 @@ void card_cd_debounce(struct rts51x_chip *chip, u8 *need_reset,
 		}
 	} else {
 		if (chip->card_status & XD_CD) {
-			rts51x_clear_start_time(chip);
 			reset_map |= XD_CARD;
 		} else if (chip->card_status & SD_CD) {
-			rts51x_clear_start_time(chip);
 			reset_map |= SD_CARD;
 		} else if (chip->card_status & MS_CD) {
-			rts51x_clear_start_time(chip);
 			reset_map |= MS_CARD;
-		} else {
-			if (rts51x_check_start_time(chip))
-				rts51x_set_start_time(chip);
 		}
 	}
 
@@ -709,7 +701,7 @@ u8 get_lun_card(struct rts51x_chip *chip, unsigned int lun)
 	return 0;
 }
 
-int card_share_mode(struct rts51x_chip *chip, int card)
+static int card_share_mode(struct rts51x_chip *chip, int card)
 {
 	u8 value;
 
@@ -823,22 +815,6 @@ int enable_card_clock(struct rts51x_chip *chip, u8 card)
 	return STATUS_SUCCESS;
 }
 
-int disable_card_clock(struct rts51x_chip *chip, u8 card)
-{
-	u8 clk_en = 0;
-
-	if (card & XD_CARD)
-		clk_en |= XD_CLK_EN;
-	if (card & SD_CARD)
-		clk_en |= SD_CLK_EN;
-	if (card & MS_CARD)
-		clk_en |= MS_CLK_EN;
-
-	RTS51X_WRITE_REG(chip, CARD_CLK_EN, clk_en, 0);
-
-	return STATUS_SUCCESS;
-}
-
 int card_power_on(struct rts51x_chip *chip, u8 card)
 {
 	u8 mask, val1, val2;
@@ -851,16 +827,7 @@ int card_power_on(struct rts51x_chip *chip, u8 card)
 	if ((card == SD_CARD) || (card == XD_CARD)) {
 		RTS51X_WRITE_REG(chip, CARD_PWR_CTL, mask | LDO3318_PWR_MASK,
 				 val1 | LDO_SUSPEND);
-		/* RTS51X_WRITE_REG(chip, CARD_PWR_CTL,
-				LDO3318_PWR_MASK, LDO_SUSPEND); */
 	}
-	/* else if(card==XD_CARD)
-	{
-		RTS51X_WRITE_REG(chip, CARD_PWR_CTL,
-			mask|LDO3318_PWR_MASK, val1|LDO_SUSPEND);
-		//RTS51X_WRITE_REG(chip, CARD_PWR_CTL,
-		//	LDO3318_PWR_MASK, LDO_SUSPEND);
-	} */
 	else {
 #endif
 		RTS51X_WRITE_REG(chip, CARD_PWR_CTL, mask, val1);
@@ -879,17 +846,6 @@ int card_power_on(struct rts51x_chip *chip, u8 card)
 	return STATUS_SUCCESS;
 }
 
-int card_power_off(struct rts51x_chip *chip, u8 card)
-{
-	u8 mask, val;
-
-	mask = POWER_MASK;
-	val = POWER_OFF;
-	RTS51X_WRITE_REG(chip, CARD_PWR_CTL, mask, val);
-
-	return STATUS_SUCCESS;
-}
-
 int monitor_card_cd(struct rts51x_chip *chip, u8 card)
 {
 	int retval;
diff --git a/drivers/staging/rts5139/rts51x_card.h b/drivers/staging/rts5139/rts51x_card.h
index ac3c1e741ab9..c5c03cce98bd 100644
--- a/drivers/staging/rts5139/rts51x_card.h
+++ b/drivers/staging/rts5139/rts51x_card.h
@@ -204,13 +204,7 @@
 
 /* LDO_POWER_CFG */
 #define TUNE_SD18_MASK			0x1C
-#define TUNE_SD18_1V7			0x00
 #define TUNE_SD18_1V8			(0x01 << 2)
-#define TUNE_SD18_1V9			(0x02 << 2)
-#define TUNE_SD18_2V0			(0x03 << 2)
-#define TUNE_SD18_2V7			(0x04 << 2)
-#define TUNE_SD18_2V8			(0x05 << 2)
-#define TUNE_SD18_2V9			(0x06 << 2)
 #define TUNE_SD18_3V3			(0x07 << 2)
 
 /* XD_CP_WAITTIME */
@@ -744,9 +738,7 @@
 int monitor_card_cd(struct rts51x_chip *chip, u8 card);
 
 void do_remaining_work(struct rts51x_chip *chip);
-void do_reset_xd_card(struct rts51x_chip *chip);
 void do_reset_sd_card(struct rts51x_chip *chip);
-void do_reset_ms_card(struct rts51x_chip *chip);
 void rts51x_init_cards(struct rts51x_chip *chip);
 void rts51x_release_cards(struct rts51x_chip *chip);
 int switch_ssc_clock(struct rts51x_chip *chip, int clk);
@@ -754,15 +746,12 @@ int switch_normal_clock(struct rts51x_chip *chip, int clk);
 int card_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 sec_addr,
 	    u16 sec_cnt);
 u8 get_lun_card(struct rts51x_chip *chip, unsigned int lun);
-int card_share_mode(struct rts51x_chip *chip, int card);
 int rts51x_select_card(struct rts51x_chip *chip, int card);
 void eject_card(struct rts51x_chip *chip, unsigned int lun);
 void trans_dma_enable(enum dma_data_direction dir, struct rts51x_chip *chip,
 		      u32 byte_cnt, u8 pack_size);
 int enable_card_clock(struct rts51x_chip *chip, u8 card);
-int disable_card_clock(struct rts51x_chip *chip, u8 card);
 int card_power_on(struct rts51x_chip *chip, u8 card);
-int card_power_off(struct rts51x_chip *chip, u8 card);
 int toggle_gpio(struct rts51x_chip *chip, u8 gpio);
 int turn_on_led(struct rts51x_chip *chip, u8 gpio);
 int turn_off_led(struct rts51x_chip *chip, u8 gpio);
diff --git a/drivers/staging/rts5139/rts51x_chip.c b/drivers/staging/rts5139/rts51x_chip.c
index b3e0bb22b0ff..db88d7a194b8 100644
--- a/drivers/staging/rts5139/rts51x_chip.c
+++ b/drivers/staging/rts5139/rts51x_chip.c
@@ -34,7 +34,6 @@
 #include "rts51x_chip.h"
 #include "rts51x_card.h"
 #include "rts51x_transport.h"
-#include "rts51x_sys.h"
 #include "xd.h"
 #include "ms.h"
 #include "sd.h"
@@ -79,20 +78,18 @@ int rts51x_reset_chip(struct rts51x_chip *chip)
 				      chip->option.sd20_pad_drive);
 		if (chip->rts5179)
 			rts51x_write_register(chip, CARD_PULL_CTL5, 0x03, 0x01);
-		if (!chip->option.ww_enable) {
-			if (CHECK_PKG(chip, LQFP48)) {
-				rts51x_write_register(chip, CARD_PULL_CTL3,
-						      0x80, 0x80);
-				rts51x_write_register(chip, CARD_PULL_CTL6,
-						      0xf0, 0xA0);
-			} else {
-				rts51x_write_register(chip, CARD_PULL_CTL1,
-						      0x30, 0x20);
-				rts51x_write_register(chip, CARD_PULL_CTL3,
-						      0x80, 0x80);
-				rts51x_write_register(chip, CARD_PULL_CTL6,
-						      0x0c, 0x08);
-			}
+		if (CHECK_PKG(chip, LQFP48)) {
+			rts51x_write_register(chip, CARD_PULL_CTL3,
+					      0x80, 0x80);
+			rts51x_write_register(chip, CARD_PULL_CTL6,
+					      0xf0, 0xA0);
+		} else {
+			rts51x_write_register(chip, CARD_PULL_CTL1,
+					      0x30, 0x20);
+			rts51x_write_register(chip, CARD_PULL_CTL3,
+					      0x80, 0x80);
+			rts51x_write_register(chip, CARD_PULL_CTL6,
+					      0x0c, 0x08);
 		}
 	}
 	if (chip->option.sd_ctl & SUPPORT_UHS50_MMC44) {
@@ -121,12 +118,6 @@ int rts51x_reset_chip(struct rts51x_chip *chip)
 
 	/* GPIO OE */
 	rts51x_add_cmd(chip, WRITE_REG_CMD, CARD_GPIO, GPIO_OE, GPIO_OE);
-#ifdef LED_AUTO_BLINK
-	/* LED autoblink */
-	rts51x_add_cmd(chip, WRITE_REG_CMD, CARD_AUTO_BLINK,
-		       BLINK_ENABLE | BLINK_SPEED_MASK,
-		       BLINK_ENABLE | chip->option.led_blink_speed);
-#endif
 	rts51x_add_cmd(chip, WRITE_REG_CMD, CARD_DMA1_CTL,
 		       EXTEND_DMA1_ASYNC_SIGNAL, EXTEND_DMA1_ASYNC_SIGNAL);
 
@@ -144,7 +135,6 @@ int rts51x_reset_chip(struct rts51x_chip *chip)
 		card_power_on(chip, SD_CARD | MS_CARD | XD_CARD);
 		wait_timeout(10);
 	}
-	rts51x_clear_start_time(chip);
 
 	return STATUS_SUCCESS;
 }
@@ -164,12 +154,6 @@ int rts51x_init_chip(struct rts51x_chip *chip)
 	chip->card_ejected = 0;
 
 	chip->lun2card[0] = XD_CARD | SD_CARD | MS_CARD;
-#if 0
-	chip->option.sdr50_tx_phase = 0x01;
-	chip->option.sdr50_rx_phase = 0x05;
-	chip->option.ddr50_tx_phase = 0x09;
-	chip->option.ddr50_rx_phase = 0x06; /* add for debug */
-#endif
 #ifdef CLOSE_SSC_POWER
 	rts51x_write_register(chip, FPDCTL, SSC_POWER_MASK, SSC_POWER_ON);
 	udelay(100);
@@ -178,9 +162,6 @@ int rts51x_init_chip(struct rts51x_chip *chip)
 	RTS51X_SET_STAT(chip, STAT_RUN);
 
 	RTS51X_READ_REG(chip, HW_VERSION, &val);
-	if ((val & 0x0f) >= 2)
-		chip->option.rcc_bug_fix_en = 0;
-	RTS51X_DEBUGP("rcc bug fix enable:%d\n", chip->option.rcc_bug_fix_en);
 	RTS51X_DEBUGP("HW_VERSION: 0x%x\n", val);
 	if (val & FPGA_VER) {
 		chip->asic_code = 0;
@@ -237,7 +218,6 @@ int rts51x_release_chip(struct rts51x_chip *chip)
 	return STATUS_SUCCESS;
 }
 
-#ifndef LED_AUTO_BLINK
 static inline void rts51x_blink_led(struct rts51x_chip *chip)
 {
 	/* Read/Write */
@@ -251,20 +231,6 @@ static inline void rts51x_blink_led(struct rts51x_chip *chip)
 		}
 	}
 }
-#endif
-
-int rts51x_check_start_time(struct rts51x_chip *chip)
-{
-	return 0;
-}
-
-void rts51x_set_start_time(struct rts51x_chip *chip)
-{
-}
-
-void rts51x_clear_start_time(struct rts51x_chip *chip)
-{
-}
 
 static void rts51x_auto_delink_cmd(struct rts51x_chip *chip)
 {
@@ -287,7 +253,6 @@ static void rts51x_auto_delink_polling_cycle(struct rts51x_chip *chip)
 			chip->option.delink_delay * 2) {
 		if (chip->auto_delink_counter ==
 		    chip->option.delink_delay) {
-			clear_first_install_mark(chip);
 			if (chip->card_exist) {
 				/* False card */
 				if (!chip->card_ejected) {
@@ -321,91 +286,13 @@ static void rts51x_auto_delink(struct rts51x_chip *chip)
 }
 #else
 /* some of called funcs are not implemented, so comment it out */
-#if 0
-/* using precise time as delink time */
-static void rts51x_auto_delink_precise_time(struct rts51x_chip *chip)
-{
-	int retvalue = 0;
-
-	retvalue = rts51x_get_card_status(chip, &chip->card_status);
-	/* get card CD status success and card CD not exist,
-	 * then check whether delink */
-	if ((retvalue == STATUS_SUCCESS)
-	    && (!(chip->card_status & (SD_CD | MS_CD | XD_CD)))) {
-		if (rts51x_count_delink_time(chip) >=
-		    chip->option.delink_delay) {
-			clear_first_install_mark(chip);
-			RTS51X_DEBUGP("No card inserted, do delink\n");
-			/* sangdy2010-05-17:disable because there is error
-			 * after SSC clock closed and card power
-			 * has been closed before */
-			/* rts51x_write_register(chip, CARD_PWR_CTL,
-					DV3318_AUTO_PWR_OFF, 0); */
-			rts51x_auto_delink_cmd(chip);
-	}
-	/* card CD exist and not ready, then do force delink */
-	if ((retvalue == STATUS_SUCCESS)
-	    && (chip->card_status & (SD_CD | MS_CD | XD_CD))) {
-		/* if card is not ejected or safely remove,
-		 * then do force delink */
-		if (!chip->card_ejected) {
-			/* sangdy2010-11-16:polling at least 2 cycles
-			 * then do force delink for card may force delink
-			 * if card is extracted and insert quickly
-			 * after ready. */
-			if (chip->auto_delink_counter > 1) {
-				if (rts51x_count_delink_time(chip) >
-				    chip->option.delink_delay * 2) {
-					RTS51X_DEBUGP("Try to do force"
-							"delink\n");
-					rts51x_auto_delink_force_cmd(chip);
-				}
-			}
-		}
-	}
-	chip->auto_delink_counter++;
-}
-#else
-static void rts51x_auto_delink_precise_time(struct rts51x_chip *chip)
-{
-}
-#endif
-
 static void rts51x_auto_delink(struct rts51x_chip *chip)
 {
-	rts51x_auto_delink_precise_time(chip);
 }
 #endif
 
 void rts51x_polling_func(struct rts51x_chip *chip)
 {
-#ifdef SUPPORT_SD_LOCK
-	struct sd_info *sd_card = &(chip->sd_card);
-
-	if (sd_card->sd_erase_status) {
-		if (chip->card_exist & SD_CARD) {
-			u8 val;
-			rts51x_read_register(chip, SD_BUS_STAT, &val);
-			if (val & SD_DAT0_STATUS) {
-				/* Erase completed */
-				sd_card->sd_erase_status = SD_NOT_ERASE;
-				sd_card->sd_lock_notify = 1;
-
-				/* SD card should be reinited,
-				 * so we release it here. */
-				sd_cleanup_work(chip);
-				release_sd_card(chip);
-				chip->card_ready &= ~SD_CARD;
-				chip->card_exist &= ~SD_CARD;
-				chip->rw_card[chip->card2lun[SD_CARD]] = NULL;
-				clear_bit(chip->card2lun[SD_CARD],
-					  &(chip->lun_mc));
-			}
-		} else {
-			sd_card->sd_erase_status = SD_NOT_ERASE;
-		}
-	}
-#endif
 
 	rts51x_init_cards(chip);
 
@@ -431,9 +318,7 @@ void rts51x_polling_func(struct rts51x_chip *chip)
 		if (!RTS51X_CHK_STAT(chip, STAT_IDLE)) {
 			RTS51X_DEBUGP("Idle state!\n");
 			RTS51X_SET_STAT(chip, STAT_IDLE);
-#ifndef LED_AUTO_BLINK
 			chip->led_toggle_counter = 0;
-#endif
 			/* Idle state, turn off LED
 			 * to reduce power consumption */
 			if (chip->option.led_always_on
@@ -467,9 +352,7 @@ void rts51x_polling_func(struct rts51x_chip *chip)
 
 	switch (RTS51X_GET_STAT(chip)) {
 	case STAT_RUN:
-#ifndef LED_AUTO_BLINK
 		rts51x_blink_led(chip);
-#endif
 		do_remaining_work(chip);
 		break;
 
@@ -484,7 +367,6 @@ void rts51x_polling_func(struct rts51x_chip *chip)
 		rts51x_auto_delink(chip);
 	} else {
 		chip->auto_delink_counter = 0;
-		rts51x_clear_start_time(chip);
 	}
 }
 
@@ -831,7 +713,7 @@ void rts51x_do_before_power_down(struct rts51x_chip *chip)
 	chip->cur_clk = 0;
 	chip->card_exist = 0;
 	chip->cur_card = 0;
-	if (chip->asic_code && !chip->option.ww_enable) {
+	if (chip->asic_code) {
 		if (CHECK_PKG(chip, LQFP48)) {
 			rts51x_write_register(chip, CARD_PULL_CTL3, 0x80, 0x00);
 			rts51x_write_register(chip, CARD_PULL_CTL6, 0xf0, 0x50);
@@ -863,16 +745,6 @@ void rts51x_prepare_run(struct rts51x_chip *chip)
 		rts51x_write_register(chip, CLK_DIV, CLK_CHANGE, 0x00);
 	}
 #endif
-#if 0
-	if (chip->option.ss_en && RTS51X_CHK_STAT(chip, STAT_SS)) {
-		rts51x_try_to_exit_ss(chip);
-		wait_timeout(100);
-		rts51x_init_chip(chip);
-		rts51x_init_cards(chip);
-	}
-
-	RTS51X_SET_STAT(chip, STAT_RUN);
-#endif
 }
 
 #ifdef _MSG_TRACE
@@ -1017,24 +889,6 @@ void rts51x_pp_status(struct rts51x_chip *chip, unsigned int lun, u8 *status,
 				status[0x0F] = 0x00;
 		}
 	}
-#ifdef SUPPORT_SD_LOCK
-	/* SD Lock/Unlock */
-	if (card == SD_CARD) {
-		status[0x17] = 0x80;
-		if (sd_card->sd_erase_status)
-			status[0x17] |= 0x01; /* Under erasing */
-		if (sd_card->sd_lock_status & SD_LOCKED) {
-			status[0x17] |= 0x02; /* Locked */
-			status[0x07] |= 0x40; /* Read protected */
-		}
-		if (sd_card->sd_lock_status & SD_PWD_EXIST)
-			status[0x17] |= 0x04; /* Contain PWD */
-	} else {
-		status[0x17] = 0x00;
-	}
-
-	RTS51X_DEBUGP("status[0x17] = 0x%x\n", status[0x17]);
-#endif
 
 	/* Function 0
 	 * Support Magic Gate, CPRM and PhyRegister R/W */
@@ -1044,12 +898,6 @@ void rts51x_pp_status(struct rts51x_chip *chip, unsigned int lun, u8 *status,
 	 * Support OC LUN status & WP LUN status */
 	status[0x1A] = 0x28;
 
-	/* Function 7 */
-#ifdef SUPPORT_SD_LOCK
-	/* Support SD Lock/Unlock */
-	status[0x1F] = 0x01;
-#endif
-
 	/* Function 2
 	 * Support OC LUN status & WP LUN status */
 	status[0x1A] = 0x28;
diff --git a/drivers/staging/rts5139/rts51x_chip.h b/drivers/staging/rts5139/rts51x_chip.h
index 13fc2a410d90..6d395b6533a8 100644
--- a/drivers/staging/rts5139/rts51x_chip.h
+++ b/drivers/staging/rts5139/rts51x_chip.h
@@ -39,12 +39,7 @@
 #define SUPPORT_CPRM
 #define SUPPORT_MAGIC_GATE
 #define SUPPORT_MSXC
-/* #define LED_AUTO_BLINK */
-
-/* { wwang, 2010-07-26
- * Add support for SD lock/unlock */
-/* #define SUPPORT_SD_LOCK */
-/* } wwang, 2010-07-26 */
+#define USING_POLLING_CYCLE_DELINK
 
 #ifdef SUPPORT_MAGIC_GA
 /* Using NORMAL_WRITE instead of AUTO_WRITE to set ICVTE */
@@ -63,7 +58,6 @@
 #define SUPPORT_OCP
 
 #define MS_SPEEDUP
-/* #define XD_SPEEDUP */
 
 #define SD_XD_IO_FOLLOW_PWR
 
@@ -81,7 +75,6 @@
 
 #define MAX_ALLOWED_LUN_CNT	8
 #define CMD_BUF_LEN		1024
-#define RSP_BUF_LEN		1024
 #define POLLING_INTERVAL	50	/* 50ms */
 
 #define XD_FREE_TABLE_CNT	1200
@@ -128,8 +121,6 @@
 #endif
 
 #define STATUS_FAIL		1
-#define STATUS_READ_FAIL	2
-#define STATUS_WRITE_FAIL	3
 #define STATUS_TIMEDOUT		4
 #define STATUS_NOMEM		5
 #define STATUS_TRANS_SHORT	6
@@ -139,8 +130,6 @@
 
 #define IDLE_MAX_COUNT		10
 #define POLLING_WAIT_CNT	1
-#define DELINK_DELAY		100
-#define LED_TOGGLE_INTERVAL	6
 #define LED_GPIO		0
 
 /* package */
@@ -157,8 +146,6 @@
 #define TRANSPORT_GOOD		0
 /* Transport good, command failed */
 #define TRANSPORT_FAILED	1
-/* Command failed, no auto-sense */
-#define TRANSPORT_NO_SENSE	2
 /* Transport bad (i.e. device dead) */
 #define TRANSPORT_ERROR		3
 
@@ -195,7 +182,6 @@ struct trace_msg_t {
 #define	SENSE_TYPE_MEDIA_INVALID_CMD_FIELD		6
 #define	SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR		7
 #define	SENSE_TYPE_MEDIA_WRITE_ERR			8
-#define SENSE_TYPE_FORMAT_IN_PROGRESS			9
 #define SENSE_TYPE_FORMAT_CMD_FAILED			10
 #ifdef SUPPORT_MAGIC_GATE
 /* COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED */
@@ -207,83 +193,27 @@ struct trace_msg_t {
 /* WRITE ERROR */
 #define SENSE_TYPE_MG_WRITE_ERR				0x0e
 #endif
-#ifdef SUPPORT_SD_LOCK
-/* FOR Locked SD card */
-#define SENSE_TYPE_MEDIA_READ_FORBIDDEN			0x10
-#endif
 
 /*---- sense key ----*/
-#define ILI                     0x20	/* ILI bit is on                    */
-
-#define NO_SENSE                0x00	/* not exist sense key              */
-#define RECOVER_ERR             0x01	/* Target/Logical unit is recoverd  */
-#define NOT_READY               0x02	/* Logical unit is not ready        */
-#define MEDIA_ERR               0x03	/* medium/data error                */
-#define HARDWARE_ERR            0x04	/* hardware error                   */
 #define ILGAL_REQ               0x05	/* CDB/parameter/identify msg error */
-#define UNIT_ATTENTION          0x06	/* unit attention condition occur   */
-#define DAT_PRTCT               0x07	/* read/write is desable            */
-#define BLNC_CHK                0x08	/* find blank/DOF in read           */
-					/* write to unblank area            */
-#define CPY_ABRT                0x0a	/* Copy/Compare/Copy&Verify illgal  */
-#define ABRT_CMD                0x0b	/* Target make the command in error */
-#define EQUAL                   0x0c	/* Search Data end with Equal       */
-#define VLM_OVRFLW              0x0d	/* Some data are left in buffer     */
-#define MISCMP                  0x0e	/* find inequality                  */
 
 /*-----------------------------------
     SENSE_DATA
 -----------------------------------*/
-/*---- valid ----*/
-#define SENSE_VALID             0x80	/* Sense data is valid as SCSI2     */
-#define SENSE_INVALID           0x00	/* Sense data is invalid as SCSI2   */
 
 /*---- error code ----*/
 #define CUR_ERR                 0x70	/* current error                    */
-#define DEF_ERR                 0x71	/* specific command error           */
 
 /*---- sense key Infomation ----*/
-#define SNSKEYINFO_LEN          3	/* length of sense key infomation   */
 
 #define SKSV                    0x80
 #define CDB_ILLEGAL             0x40
-#define DAT_ILLEGAL             0x00
-#define BPV                     0x08
-#define BIT_ILLEGAL0            0	/* bit0 is illegal                  */
-#define BIT_ILLEGAL1            1	/* bit1 is illegal                  */
-#define BIT_ILLEGAL2            2	/* bit2 is illegal                  */
-#define BIT_ILLEGAL3            3	/* bit3 is illegal                  */
-#define BIT_ILLEGAL4            4	/* bit4 is illegal                  */
-#define BIT_ILLEGAL5            5	/* bit5 is illegal                  */
-#define BIT_ILLEGAL6            6	/* bit6 is illegal                  */
-#define BIT_ILLEGAL7            7	/* bit7 is illegal                  */
 
 /*---- ASC ----*/
-#define ASC_NO_INFO             0x00
-#define ASC_MISCMP              0x1d
 #define ASC_INVLD_CDB           0x24
-#define ASC_INVLD_PARA          0x26
-#define ASC_LU_NOT_READY	0x04
-#define ASC_WRITE_ERR           0x0c
-#define ASC_READ_ERR            0x11
-#define ASC_LOAD_EJCT_ERR       0x53
-#define	ASC_MEDIA_NOT_PRESENT	0x3A
-#define	ASC_MEDIA_CHANGED	0x28
-#define	ASC_MEDIA_IN_PROCESS	0x04
-#define	ASC_WRITE_PROTECT	0x27
-#define ASC_LUN_NOT_SUPPORTED	0x25
 
 /*---- ASQC ----*/
-#define ASCQ_NO_INFO            0x00
-#define	ASCQ_MEDIA_IN_PROCESS	0x01
-#define ASCQ_MISCMP             0x00
 #define ASCQ_INVLD_CDB          0x00
-#define ASCQ_INVLD_PARA         0x02
-#define ASCQ_LU_NOT_READY	0x02
-#define ASCQ_WRITE_ERR          0x02
-#define ASCQ_READ_ERR           0x00
-#define ASCQ_LOAD_EJCT_ERR      0x00
-#define	ASCQ_WRITE_PROTECT	0x00
 
 struct sense_data_t {
 	unsigned char err_code;	/* error code */
@@ -296,13 +226,13 @@ struct sense_data_t {
 	unsigned char seg_no;	/* segment No.                      */
 	unsigned char sense_key;	/* byte5 : ILI                      */
 	/* bit3-0 : sense key              */
-	unsigned char info[4];	/* infomation                       */
+	unsigned char info[4];	/* information                       */
 	unsigned char ad_sense_len;	/* additional sense data length     */
-	unsigned char cmd_info[4];	/* command specific infomation      */
+	unsigned char cmd_info[4];	/* command specific information      */
 	unsigned char asc;	/* ASC                              */
 	unsigned char ascq;	/* ASCQ                             */
 	unsigned char rfu;	/* FRU                              */
-	unsigned char sns_key_info[3];	/* sense key specific infomation    */
+	unsigned char sns_key_info[3];	/* sense key specific information    */
 };
 
 /* sd_ctl bit map */
@@ -323,8 +253,6 @@ struct sense_data_t {
 #define SUPPORT_UHS50_MMC44		0x40
 
 struct rts51x_option {
-	u8 led_blink_speed;
-
 	int mspro_formatter_enable;
 
 	/* card clock expected by user for fpga platform */
@@ -368,8 +296,6 @@ struct rts51x_option {
 	int ss_en;
 	/* Interval to enter SS from IDLE state (second) */
 	int ss_delay;
-	int needs_remote_wakeup;
-	u8 ww_enable;	/* sangdy2010-08-03:add for remote wakeup */
 
 	/* Enable SSC clock */
 	int ssc_en;
@@ -392,10 +318,7 @@ struct rts51x_option {
 	/*if reset or rw fail,then set SD20 pad drive again */
 	u8 reset_or_rw_fail_set_pad_drive;
 
-	u8 rcc_fail_flag;	/* add to indicate whether rcc bug happen */
-	u8 rcc_bug_fix_en;	/* if set,then support fixing rcc bug */
 	u8 debounce_num;	/* debounce number */
-	int polling_time;	/* polling delay time */
 	u8 led_toggle_interval;	/* used to control led toggle speed */
 	int xd_rwn_step;
 	u8 sd_send_status_en;
@@ -405,7 +328,7 @@ struct rts51x_option {
 	u8 ddr50_rx_phase;
 	u8 sdr50_tx_phase;
 	u8 sdr50_rx_phase;
-	/* used to enable select sdr50 tx phase according to  proportion. */
+	/* used to enable select sdr50 tx phase according to proportion. */
 	u8 sdr50_phase_sel;
 	u8 ms_errreg_fix;
 	u8 reset_mmc_first;
@@ -614,11 +537,6 @@ struct sd_info {
 	u8 sd_reset_fail;	/* sangdy2010-07-01 */
 	u8 sd_send_status_en;
 
-#ifdef SUPPORT_SD_LOCK
-	u8 sd_lock_status;
-	u8 sd_erase_status;
-	u8 sd_lock_notify;
-#endif
 };
 
 #define MODE_512_SEQ		0x01
@@ -720,9 +638,8 @@ struct rts51x_chip {
 	struct scsi_cmnd *srb;
 	struct sense_data_t sense_buffer[MAX_ALLOWED_LUN_CNT];
 
-#ifndef LED_AUTO_BLINK
 	int led_toggle_counter;
-#endif
+
 	int ss_counter;
 	int idle_counter;
 	int auto_delink_counter;
diff --git a/drivers/staging/rts5139/rts51x_fop.c b/drivers/staging/rts5139/rts51x_fop.c
index 6eaebb6223c9..ef893c8cdec6 100644
--- a/drivers/staging/rts5139/rts51x_fop.c
+++ b/drivers/staging/rts5139/rts51x_fop.c
@@ -234,12 +234,7 @@ ssize_t rts51x_write(struct file *filp, const char __user *buf, size_t count,
 	return 0;
 }
 
-#if 0 /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 36) */
-int rts51x_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-		 unsigned long arg)
-#else
 long rts51x_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-#endif
 {
 	struct rts51x_chip *chip;
 	struct sd_direct_cmnd cmnd;
diff --git a/drivers/staging/rts5139/rts51x_fop.h b/drivers/staging/rts5139/rts51x_fop.h
index 94d75f08d255..eb45acf50d1a 100644
--- a/drivers/staging/rts5139/rts51x_fop.h
+++ b/drivers/staging/rts5139/rts51x_fop.h
@@ -50,12 +50,7 @@ ssize_t rts51x_read(struct file *filp, char __user *buf, size_t count,
 		    loff_t *f_pos);
 ssize_t rts51x_write(struct file *filp, const char __user *buf, size_t count,
 		     loff_t *f_pos);
-#if 0 /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 36) */
-int rts51x_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-		 unsigned long arg);
-#else
 long rts51x_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
-#endif
 
 #endif
 
diff --git a/drivers/staging/rts5139/rts51x_scsi.c b/drivers/staging/rts5139/rts51x_scsi.c
index 87c9cdc8bd29..e07a1f4f58cf 100644
--- a/drivers/staging/rts5139/rts51x_scsi.c
+++ b/drivers/staging/rts5139/rts51x_scsi.c
@@ -40,7 +40,6 @@
 #include "rts51x_scsi.h"
 #include "rts51x_card.h"
 #include "rts51x_transport.h"
-#include "rts51x_sys.h"
 #include "sd_cprm.h"
 #include "ms_mg.h"
 #include "trace.h"
@@ -370,10 +369,6 @@ void set_sense_type(struct rts51x_chip *chip, unsigned int lun, int sense_type)
 			       ASC_INVLD_CDB, ASCQ_INVLD_CDB, CDB_ILLEGAL, 1);
 		break;
 
-	case SENSE_TYPE_FORMAT_IN_PROGRESS:
-		set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x04, 0x04, 0, 0);
-		break;
-
 	case SENSE_TYPE_FORMAT_CMD_FAILED:
 		set_sense_data(chip, lun, CUR_ERR, 0x03, 0, 0x31, 0x01, 0, 0);
 		break;
@@ -396,12 +391,6 @@ void set_sense_type(struct rts51x_chip *chip, unsigned int lun, int sense_type)
 		break;
 #endif
 
-#ifdef SUPPORT_SD_LOCK
-	case SENSE_TYPE_MEDIA_READ_FORBIDDEN:
-		set_sense_data(chip, lun, CUR_ERR, 0x07, 0, 0x11, 0x13, 0, 0);
-		break;
-#endif
-
 	case SENSE_TYPE_NO_SENSE:
 	default:
 		set_sense_data(chip, lun, CUR_ERR, 0, 0, 0, 0, 0, 0);
@@ -448,20 +437,6 @@ static int test_unit_ready(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 		set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
 		return TRANSPORT_FAILED;
 	}
-#ifdef SUPPORT_SD_LOCK
-	if (get_lun_card(chip, SCSI_LUN(srb)) == SD_CARD) {
-		struct sd_info *sd_card = &(chip->sd_card);
-		if (sd_card->sd_lock_notify) {
-			sd_card->sd_lock_notify = 0;
-			set_sense_type(chip, lun, SENSE_TYPE_MEDIA_CHANGE);
-			return TRANSPORT_FAILED;
-		} else if (sd_card->sd_lock_status & SD_LOCKED) {
-			set_sense_type(chip, lun,
-				       SENSE_TYPE_MEDIA_READ_FORBIDDEN);
-			return TRANSPORT_FAILED;
-		}
-	}
-#endif
 
 	return TRANSPORT_GOOD;
 }
@@ -797,9 +772,6 @@ static int request_sense(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 
 static int read_write(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 {
-#ifdef SUPPORT_SD_LOCK
-	struct sd_info *sd_card = &(chip->sd_card);
-#endif
 	unsigned int lun = SCSI_LUN(srb);
 	int retval;
 	u32 start_sec;
@@ -819,25 +791,6 @@ static int read_write(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 	rts51x_prepare_run(chip);
 	RTS51X_SET_STAT(chip, STAT_RUN);
 
-#ifdef SUPPORT_SD_LOCK
-	if (sd_card->sd_erase_status) {
-		/* Accessing to any card is forbidden
-		 * until the erase procedure of SD is completed */
-		RTS51X_DEBUGP("SD card being erased!\n");
-		set_sense_type(chip, lun, SENSE_TYPE_MEDIA_READ_FORBIDDEN);
-		TRACE_RET(chip, TRANSPORT_FAILED);
-	}
-
-	if (get_lun_card(chip, lun) == SD_CARD) {
-		if (sd_card->sd_lock_status & SD_LOCKED) {
-			RTS51X_DEBUGP("SD card locked!\n");
-			set_sense_type(chip, lun,
-				       SENSE_TYPE_MEDIA_READ_FORBIDDEN);
-			TRACE_RET(chip, TRANSPORT_FAILED);
-		}
-	}
-#endif
-
 	if ((srb->cmnd[0] == READ_10) || (srb->cmnd[0] == WRITE_10)) {
 		start_sec =
 		    ((u32) srb->cmnd[2] << 24) |
@@ -883,20 +836,12 @@ static int read_write(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 
 	retval = card_rw(srb, chip, start_sec, sec_cnt);
 	if (retval != STATUS_SUCCESS) {
-#if 0
-		if (chip->need_release & chip->lun2card[lun]) {
-			set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
-		} else {
-#endif
 		if (srb->sc_data_direction == DMA_FROM_DEVICE) {
 			set_sense_type(chip, lun,
 				       SENSE_TYPE_MEDIA_UNRECOVER_READ_ERR);
 		} else {
 			set_sense_type(chip, lun, SENSE_TYPE_MEDIA_WRITE_ERR);
 		}
-#if 0
-		}
-#endif
 		TRACE_RET(chip, TRANSPORT_FAILED);
 	}
 
@@ -1516,7 +1461,7 @@ static int ms_format_cmnd(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 }
 
 #ifdef SUPPORT_PCGL_1P18
-int get_ms_information(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+static int get_ms_information(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 {
 	struct ms_info *ms_card = &(chip->ms_card);
 	unsigned int lun = SCSI_LUN(srb);
@@ -1677,7 +1622,7 @@ static int sd_extention_cmnd(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 #endif
 
 #ifdef SUPPORT_MAGIC_GATE
-int mg_report_key(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+static int mg_report_key(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 {
 	struct ms_info *ms_card = &(chip->ms_card);
 	unsigned int lun = SCSI_LUN(srb);
@@ -1764,7 +1709,7 @@ int mg_report_key(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 	return TRANSPORT_GOOD;
 }
 
-int mg_send_key(struct scsi_cmnd *srb, struct rts51x_chip *chip)
+static int mg_send_key(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 {
 	struct ms_info *ms_card = &(chip->ms_card);
 	unsigned int lun = SCSI_LUN(srb);
@@ -1871,30 +1816,10 @@ int mg_send_key(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 
 int rts51x_scsi_handler(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 {
-#ifdef SUPPORT_SD_LOCK
-	struct sd_info *sd_card = &(chip->sd_card);
-#endif
 	struct ms_info *ms_card = &(chip->ms_card);
 	unsigned int lun = SCSI_LUN(srb);
 	int result = TRANSPORT_GOOD;
 
-#ifdef SUPPORT_SD_LOCK
-	if (sd_card->sd_erase_status) {
-		/* Block all SCSI command except for REQUEST_SENSE
-		 * and rs_ppstatus */
-		if (!
-		    ((srb->cmnd[0] == VENDOR_CMND)
-		     && (srb->cmnd[1] == SCSI_APP_CMD)
-		     && (srb->cmnd[2] == GET_DEV_STATUS))
-		    && (srb->cmnd[0] != REQUEST_SENSE)) {
-			/* Logical Unit Not Ready Format in Progress */
-			set_sense_data(chip, lun, CUR_ERR, 0x02, 0, 0x04, 0x04,
-				       0, 0);
-			TRACE_RET(chip, TRANSPORT_FAILED);
-		}
-	}
-#endif
-
 	if ((get_lun_card(chip, lun) == MS_CARD) &&
 	    (ms_card->format_status == FORMAT_IN_PROGRESS)) {
 		if ((srb->cmnd[0] != REQUEST_SENSE)
@@ -1994,11 +1919,6 @@ int rts51x_scsi_handler(struct scsi_cmnd *srb, struct rts51x_chip *chip)
  * Host functions
  ***********************************************************************/
 
-const char *host_info(struct Scsi_Host *host)
-{
-	return "SCSI emulation for RTS51xx USB driver-based card reader";
-}
-
 int slave_alloc(struct scsi_device *sdev)
 {
 	/*
@@ -2111,14 +2031,7 @@ int queuecommand_lck(struct scsi_cmnd *srb, void (*done) (struct scsi_cmnd *))
 	return 0;
 }
 
-#if 0 /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 37) */
-int queuecommand(struct scsi_cmnd *srb, void (*done) (struct scsi_cmnd *))
-{
-	return queuecommand_lck(srb, done);
-}
-#else
 DEF_SCSI_QCMD(queuecommand)
-#endif
 /***********************************************************************
  * Error handling functions
  ***********************************************************************/
diff --git a/drivers/staging/rts5139/rts51x_scsi.h b/drivers/staging/rts5139/rts51x_scsi.h
index 3a8ca069b278..060d2c2e77ec 100644
--- a/drivers/staging/rts5139/rts51x_scsi.h
+++ b/drivers/staging/rts5139/rts51x_scsi.h
@@ -145,16 +145,11 @@ struct Scsi_Host;
 struct scsi_device;
 struct scsi_cmnd;
 
-const char *host_info(struct Scsi_Host *host);
 int slave_alloc(struct scsi_device *sdev);
 int slave_configure(struct scsi_device *sdev);
 int proc_info(struct Scsi_Host *host, char *buffer,
 	      char **start, off_t offset, int length, int inout);
-#if 0 /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 37) */
-int queuecommand(struct scsi_cmnd *srb, void (*done) (struct scsi_cmnd *));
-#else
 int queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
-#endif
 int command_abort(struct scsi_cmnd *srb);
 int device_reset(struct scsi_cmnd *srb);
 int bus_reset(struct scsi_cmnd *srb);
diff --git a/drivers/staging/rts5139/rts51x_sys.h b/drivers/staging/rts5139/rts51x_sys.h
deleted file mode 100644
index b09cd34a6c02..000000000000
--- a/drivers/staging/rts5139/rts51x_sys.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* Driver for Realtek USB RTS51xx card reader
- * Header file
- *
- * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- *
- * Author:
- *   wwang (wei_wang@realsil.com.cn)
- *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- * Maintainer:
- *   Edwin Rong (edwin_rong@realsil.com.cn)
- *   No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
- */
-
-#ifndef __RTS51X_SYS_H
-#define __RTS51X_SYS_H
-
-#include "rts51x.h"
-#include "rts51x_chip.h"
-#include "rts51x_card.h"
-
-#define USING_POLLING_CYCLE_DELINK
-
-extern int  rts51x_check_start_time(struct rts51x_chip *chip);
-extern void rts51x_set_start_time(struct rts51x_chip *chip);
-extern void rts51x_clear_start_time(struct rts51x_chip *chip);
-
-/* typedef dma_addr_t ULONG_PTR; */
-
-static inline void rts51x_reset_detected_cards(struct rts51x_chip *chip)
-{
-/*      rts51x_reset_cards(chip); */
-}
-
-static inline void clear_first_install_mark(struct rts51x_chip *chip)
-{
-}
-
-void rts51x_enter_ss(struct rts51x_chip *chip);
-void rts51x_exit_ss(struct rts51x_chip *chip);
-
-#endif /* __RTS51X_SYS_H */
diff --git a/drivers/staging/rts5139/rts51x_transport.c b/drivers/staging/rts5139/rts51x_transport.c
index da9c83b49426..89e4d805a345 100644
--- a/drivers/staging/rts5139/rts51x_transport.c
+++ b/drivers/staging/rts5139/rts51x_transport.c
@@ -120,7 +120,7 @@ unsigned int rts51x_access_sglist(unsigned char *buffer,
 	return cnt;
 }
 
-unsigned int rts51x_access_xfer_buf(unsigned char *buffer,
+static unsigned int rts51x_access_xfer_buf(unsigned char *buffer,
 				    unsigned int buflen, struct scsi_cmnd *srb,
 				    struct scatterlist **sgptr,
 				    unsigned int *offset, enum xfer_buf_dir dir)
@@ -252,6 +252,8 @@ static int rts51x_msg_common(struct rts51x_chip *chip, struct urb *urb,
 	return status;
 }
 
+static int rts51x_clear_halt(struct rts51x_chip *chip, unsigned int pipe);
+
 /*
  * Interpret the results of a URB transfer
  */
@@ -359,7 +361,7 @@ int rts51x_ctrl_transfer(struct rts51x_chip *chip, unsigned int pipe,
 				    rts51x->current_urb->actual_length);
 }
 
-int rts51x_clear_halt(struct rts51x_chip *chip, unsigned int pipe)
+static int rts51x_clear_halt(struct rts51x_chip *chip, unsigned int pipe)
 {
 	int result;
 	int endp = usb_pipeendpoint(pipe);
@@ -378,11 +380,6 @@ int rts51x_clear_halt(struct rts51x_chip *chip, unsigned int pipe)
 	return STATUS_SUCCESS;
 }
 
-int rts51x_reset_pipe(struct rts51x_chip *chip, char pipe)
-{
-	return rts51x_clear_halt(chip, pipe);
-}
-
 static void rts51x_sg_clean(struct usb_sg_request *io)
 {
 	if (io->urbs) {
@@ -391,226 +388,17 @@ static void rts51x_sg_clean(struct usb_sg_request *io)
 		kfree(io->urbs);
 		io->urbs = NULL;
 	}
-#if 0 /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 35) */
-	if (io->dev->dev.dma_mask != NULL)
-		usb_buffer_unmap_sg(io->dev, usb_pipein(io->pipe),
-				    io->sg, io->nents);
-#endif
 	io->dev = NULL;
 }
-#if 0
-static void rts51x_sg_complete(struct urb *urb)
-{
-	struct usb_sg_request *io = urb->context;
-	int status = urb->status;
-
-	spin_lock(&io->lock);
-
-	/* In 2.5 we require hcds' endpoint queues not to progress after fault
-	* reports, until the completion callback (this!) returns.  That lets
-	* device driver code (like this routine) unlink queued urbs first,
-	* if it needs to, since the HC won't work on them at all.  So it's
-	* not possible for page N+1 to overwrite page N, and so on.
-	*
-	* That's only for "hard" faults; "soft" faults (unlinks) sometimes
-	* complete before the HCD can get requests away from hardware,
-	* though never during cleanup after a hard fault.
-	*/
-	if (io->status
-		&& (io->status != -ECONNRESET
-		|| status != -ECONNRESET)
-		&& urb->actual_length) {
-			dev_err(io->dev->bus->controller,
-				"dev %s ep%d%s scatterlist error %d/%d\n",
-				io->dev->devpath,
-				usb_endpoint_num(&urb->ep->desc),
-				usb_urb_dir_in(urb) ? "in" : "out",
-				status, io->status);
-			/* BUG (); */
-	}
-
-	if (io->status == 0 && status && status != -ECONNRESET) {
-		int i, found, retval;
-
-		io->status = status;
-
-		/* the previous urbs, and this one, completed already.
-		* unlink pending urbs so they won't rx/tx bad data.
-		* careful: unlink can sometimes be synchronous...
-		*/
-		spin_unlock(&io->lock);
-		for (i = 0, found = 0; i < io->entries; i++) {
-			if (!io->urbs[i] || !io->urbs[i]->dev)
-				continue;
-			if (found) {
-				retval = usb_unlink_urb(io->urbs[i]);
-				if (retval != -EINPROGRESS &&
-					retval != -ENODEV &&
-					retval != -EBUSY)
-					dev_err(&io->dev->dev,
-						"%s, unlink --> %d\n",
-						__func__, retval);
-			} else if (urb == io->urbs[i])
-				found = 1;
-		}
-		spin_lock(&io->lock);
-	}
-	urb->dev = NULL;
-
-	/* on the last completion, signal usb_sg_wait() */
-	io->bytes += urb->actual_length;
-	io->count--;
-	if (!io->count)
-		complete(&io->complete);
-
-	spin_unlock(&io->lock);
-}
-
-/* This function is ported from usb_sg_init, which can transfer
- * sg list partially */
-int rts51x_sg_init_partial(struct usb_sg_request *io, struct usb_device *dev,
-	unsigned pipe, unsigned period, void *buf, struct scatterlist **sgptr,
-	unsigned int *offset, int nents, size_t length, gfp_t mem_flags)
-{
-	int i;
-	int urb_flags;
-	int dma;
-	struct scatterlist *sg = *sgptr, *first_sg;
-
-	first_sg = (struct scatterlist *)buf;
-	if (!sg)
-		sg = first_sg;
-
-	if (!io || !dev || !sg
-		|| usb_pipecontrol(pipe)
-		|| usb_pipeisoc(pipe)
-		|| (nents <= 0))
-		return -EINVAL;
-
-	spin_lock_init(&io->lock);
-	io->dev = dev;
-	io->pipe = pipe;
-	io->sg = first_sg;  /* used by unmap */
-	io->nents = nents;
-
-	RTS51X_DEBUGP("Before map, sg address: 0x%x\n", (unsigned int)sg);
-	RTS51X_DEBUGP("Before map, dev address: 0x%x\n", (unsigned int)dev);
-
-	/* not all host controllers use DMA (like the mainstream pci ones);
-	* they can use PIO (sl811) or be software over another transport.
-	*/
-	dma = (dev->dev.dma_mask != NULL);
-	if (dma) {
-		/* map the whole sg list, because here we only know the
-		 * total nents */
-		io->entries = usb_buffer_map_sg(dev, usb_pipein(pipe),
-		first_sg, nents);
-	} else {
-		io->entries = nents;
-	}
-
-	/* initialize all the urbs we'll use */
-	if (io->entries <= 0)
-		return io->entries;
-
-	io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
-	if (!io->urbs)
-		goto nomem;
-
-	urb_flags = URB_NO_INTERRUPT;
-	if (dma)
-		urb_flags |= URB_NO_TRANSFER_DMA_MAP;
-	if (usb_pipein(pipe))
-		urb_flags |= URB_SHORT_NOT_OK;
-
-	RTS51X_DEBUGP("io->entries = %d\n", io->entries);
-
-	for (i = 0; (sg != NULL) && (length > 0); i++) {
-		unsigned len;
-
-		RTS51X_DEBUGP("sg address: 0x%x\n", (unsigned int)sg);
-		RTS51X_DEBUGP("length = %d, *offset = %d\n", length, *offset);
-
-		io->urbs[i] = usb_alloc_urb(0, mem_flags);
-		if (!io->urbs[i]) {
-			io->entries = i;
-			goto nomem;
-		}
-
-		io->urbs[i]->dev = NULL;
-		io->urbs[i]->pipe = pipe;
-		io->urbs[i]->interval = period;
-		io->urbs[i]->transfer_flags = urb_flags;
-
-		io->urbs[i]->complete = rts51x_sg_complete;
-		io->urbs[i]->context = io;
-
-		if (dma) {
-			io->urbs[i]->transfer_dma =
-				sg_dma_address(sg) + *offset;
-			len = sg_dma_len(sg) - *offset;
-			io->urbs[i]->transfer_buffer = NULL;
-			RTS51X_DEBUGP(" -- sg entry dma length = %d\n",
-						sg_dma_len(sg));
-		} else {
-			/* hc may use _only_ transfer_buffer */
-			io->urbs[i]->transfer_buffer = sg_virt(sg) + *offset;
-			len = sg->length - *offset;
-			RTS51X_DEBUGP(" -- sg entry length = %d\n",
-						sg->length);
-		}
-
-		if (length >= len) {
-			*offset = 0;
-			io->urbs[i]->transfer_buffer_length = len;
-			length -= len;
-			sg = sg_next(sg);
-		} else {
-			*offset += length;
-			io->urbs[i]->transfer_buffer_length = length;
-			length = 0;
-		}
-		if (length == 0)
-			io->entries = i + 1;
-#if 0
-		if (length) {
-			len = min_t(unsigned, len, length);
-			length -= len;
-			if (length == 0) {
-				io->entries = i + 1;
-				*offset += len;
-			} else {
-				*offset = 0;
-			}
-		}
-#endif
-	}
-	RTS51X_DEBUGP("In %s, urb count: %d\n", __func__, i);
-	io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
-
-	RTS51X_DEBUGP("sg address stored in sgptr: 0x%x\n", (unsigned int)sg);
-	*sgptr = sg;
-
-	/* transaction state */
-	io->count = io->entries;
-	io->status = 0;
-	io->bytes = 0;
-	init_completion(&io->complete);
-	return 0;
 
-nomem:
-	rts51x_sg_clean(io);
-	return -ENOMEM;
-}
-#endif
-int rts51x_sg_init(struct usb_sg_request *io, struct usb_device *dev,
+static int rts51x_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 		   unsigned pipe, unsigned period, struct scatterlist *sg,
 		   int nents, size_t length, gfp_t mem_flags)
 {
 	return usb_sg_init(io, dev, pipe, period, sg, nents, length, mem_flags);
 }
 
-int rts51x_sg_wait(struct usb_sg_request *io, int timeout)
+static int rts51x_sg_wait(struct usb_sg_request *io, int timeout)
 {
 	long timeleft;
 	int i;
@@ -630,7 +418,7 @@ int rts51x_sg_wait(struct usb_sg_request *io, int timeout)
 		 */
 		spin_unlock_irq(&io->lock);
 		switch (retval) {
-			/* maybe we retrying will recover */
+			/* maybe the retry will recover */
 		case -ENXIO:	/* hc didn't queue this one */
 		case -EAGAIN:
 		case -ENOMEM:
@@ -740,56 +528,9 @@ static int rts51x_bulk_transfer_sglist(struct rts51x_chip *chip,
 	return interpret_urb_result(chip, pipe, length, result,
 				    chip->usb->current_sg.bytes);
 }
-#if 0
-static int rts51x_bulk_transfer_sglist_partial(struct rts51x_chip *chip,
-		unsigned int pipe, void *buf, struct scatterlist **sgptr,
-		unsigned int *offset, int num_sg, unsigned int length,
-		unsigned int *act_len, int timeout)
-{
-	int result;
-
-	/* don't submit s-g requests during abort processing */
-	if (test_bit(FLIDX_ABORTING, &chip->usb->dflags))
-		TRACE_RET(chip, STATUS_ERROR);
 
-	/* initialize the scatter-gather request block */
-	RTS51X_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__,
-			length, num_sg);
-	result = rts51x_sg_init_partial(&chip->usb->current_sg,
-			chip->usb->pusb_dev, pipe, 0, buf, sgptr, offset,
-			num_sg, length, GFP_NOIO);
-	if (result) {
-		RTS51X_DEBUGP("rts51x_sg_init_partial returned %d\n", result);
-		TRACE_RET(chip, STATUS_ERROR);
-	}
-
-	/* since the block has been initialized successfully, it's now
-	 * okay to cancel it */
-	set_bit(FLIDX_SG_ACTIVE, &chip->usb->dflags);
-
-	/* did an abort occur during the submission? */
-	if (test_bit(FLIDX_ABORTING, &chip->usb->dflags)) {
-
-		/* cancel the request, if it hasn't been cancelled already */
-		if (test_and_clear_bit(FLIDX_SG_ACTIVE, &chip->usb->dflags)) {
-			RTS51X_DEBUGP("-- cancelling sg request\n");
-			usb_sg_cancel(&chip->usb->current_sg);
-		}
-	}
-
-	/* wait for the completion of the transfer */
-	result = rts51x_sg_wait(&chip->usb->current_sg, timeout);
-
-	clear_bit(FLIDX_SG_ACTIVE, &chip->usb->dflags);
-
-	/* result = us->current_sg.status; */
-	if (act_len)
-		*act_len = chip->usb->current_sg.bytes;
-	return interpret_urb_result(chip, pipe, length, result,
-		chip->usb->current_sg.bytes);
-}
-#endif
-int rts51x_bulk_transfer_buf(struct rts51x_chip *chip, unsigned int pipe,
+static int rts51x_bulk_transfer_buf(struct rts51x_chip *chip,
+			     unsigned int pipe,
 			     void *buf, unsigned int length,
 			     unsigned int *act_len, int timeout)
 {
@@ -860,11 +601,6 @@ int rts51x_transfer_data_partial(struct rts51x_chip *chip, unsigned int pipe,
 		}
 
 		kfree(tmp_buf);
-#if 0
-		result = rts51x_bulk_transfer_sglist_partial(chip, pipe, buf,
-					(struct scatterlist **)ptr, offset,
-					use_sg, len, act_len, timeout);
-#endif
 	} else {
 		unsigned int step = 0;
 		if (offset)
diff --git a/drivers/staging/rts5139/rts51x_transport.h b/drivers/staging/rts5139/rts51x_transport.h
index 9dd556ea9c08..024f115540a6 100644
--- a/drivers/staging/rts5139/rts51x_transport.h
+++ b/drivers/staging/rts5139/rts51x_transport.h
@@ -40,11 +40,6 @@ unsigned int rts51x_access_sglist(unsigned char *buffer,
 				  unsigned int buflen, void *sglist,
 				  void **sgptr, unsigned int *offset,
 				  enum xfer_buf_dir dir);
-unsigned int rts51x_access_xfer_buf(unsigned char *buffer, unsigned int buflen,
-				    struct scsi_cmnd *srb,
-				    struct scatterlist **sgptr,
-				    unsigned int *offset,
-				    enum xfer_buf_dir dir);
 void rts51x_set_xfer_buf(unsigned char *buffer, unsigned int buflen,
 			 struct scsi_cmnd *srb);
 void rts51x_get_xfer_buf(unsigned char *buffer, unsigned int buflen,
@@ -53,7 +48,6 @@ void rts51x_get_xfer_buf(unsigned char *buffer, unsigned int buflen,
 int rts51x_ctrl_transfer(struct rts51x_chip *chip, unsigned int pipe,
 			 u8 request, u8 requesttype, u16 value, u16 index,
 			 void *data, u16 size, int timeout);
-int rts51x_clear_halt(struct rts51x_chip *chip, unsigned int pipe);
 int rts51x_transfer_data(struct rts51x_chip *chip, unsigned int pipe,
 			 void *buf, unsigned int len, int use_sg,
 			 unsigned int *act_len, int timeout);
@@ -62,12 +56,6 @@ int rts51x_transfer_data_partial(struct rts51x_chip *chip, unsigned int pipe,
 				 unsigned int len, int use_sg,
 				 unsigned int *act_len, int timeout);
 
-/* whichPipe:
- * 0: bulk in pipe
- * 1: bulk out pipe
- * 2: intr  in pipe */
-int rts51x_reset_pipe(struct rts51x_chip *chip, char pipe);
-
 #ifndef POLLING_IN_THREAD
 int rts51x_start_epc_transfer(struct rts51x_chip *chip);
 void rts51x_cancel_epc_transfer(struct rts51x_chip *chip);
diff --git a/drivers/staging/rts5139/sd.c b/drivers/staging/rts5139/sd.c
index d5dd2f926d1d..b739f26f78cc 100644
--- a/drivers/staging/rts5139/sd.c
+++ b/drivers/staging/rts5139/sd.c
@@ -246,12 +246,7 @@ RTY_SEND_CMD:
 				if (buf[1] & 0x80)
 					TRACE_RET(chip, STATUS_FAIL);
 			}
-#ifdef SUPPORT_SD_LOCK
-			/* exclude bit25 CARD_IS_LOCKED */
-			if (buf[1] & 0x7D) {
-#else
 			if (buf[1] & 0x7F) {
-#endif
 				RTS51X_DEBUGP("buf[1]: 0x%02x\n", buf[1]);
 				TRACE_RET(chip, STATUS_FAIL);
 			}
@@ -709,37 +704,7 @@ int sd_select_card(struct rts51x_chip *chip, int select)
 	return STATUS_SUCCESS;
 }
 
-#ifdef SUPPORT_SD_LOCK
-int sd_update_lock_status(struct rts51x_chip *chip)
-{
-	struct sd_info *sd_card = &(chip->sd_card);
-	int retval;
-	u8 rsp[5];
-
-	retval =
-	    sd_send_cmd_get_rsp(chip, SEND_STATUS, sd_card->sd_addr,
-				SD_RSP_TYPE_R1, rsp, 5);
-	if (retval != STATUS_SUCCESS)
-		TRACE_RET(chip, STATUS_FAIL);
-
-	if (rsp[1] & 0x02)
-		sd_card->sd_lock_status |= SD_LOCKED;
-	else
-		sd_card->sd_lock_status &= ~SD_LOCKED;
-
-	RTS51X_DEBUGP("sd_card->sd_lock_status = 0x%x\n",
-		       sd_card->sd_lock_status);
-
-	if (rsp[1] & 0x01) {
-		/* LOCK_UNLOCK_FAILED */
-		TRACE_RET(chip, STATUS_FAIL);
-	}
-
-	return STATUS_SUCCESS;
-}
-#endif
-
-int sd_wait_currentstate_dataready(struct rts51x_chip *chip, u8 statechk,
+static int sd_wait_currentstate_dataready(struct rts51x_chip *chip, u8 statechk,
 				   u8 rdychk, u16 pollingcnt)
 {
 	struct sd_info *sd_card = &(chip->sd_card);
@@ -1197,15 +1162,6 @@ static int sd_switch_function(struct rts51x_chip *chip, u8 bus_width)
 	RTS51X_DEBUGP("SD_FUNC_GROUP_1: func_to_switch = 0x%02x",
 		       func_to_switch);
 
-#ifdef SUPPORT_SD_LOCK
-	if ((sd_card->sd_lock_status & SD_SDR_RST)
-	    && (DDR50_SUPPORT == func_to_switch)
-	    && (sd_card->func_group1_mask & SDR50_SUPPORT_MASK)) {
-		func_to_switch = SDR50_SUPPORT;
-		RTS51X_DEBUGP("Using SDR50 instead of DDR50 for SD Lock\n");
-	}
-#endif
-
 	if (func_to_switch) {
 		retval =
 		    sd_check_switch(chip, SD_FUNC_GROUP_1, func_to_switch,
@@ -1562,7 +1518,7 @@ static u8 sd_search_final_phase(struct rts51x_chip *chip, u32 phase_map,
 	}
 
 Search_Finish:
-	RTS51X_DEBUGP("Final choosen phase: %d\n", final_phase);
+	RTS51X_DEBUGP("Final chosen phase: %d\n", final_phase);
 	return final_phase;
 }
 
@@ -2024,10 +1980,6 @@ Switch_Fail:
 	k = 0;
 	hi_cap_flow = 0;
 	support_1v8 = 0;
-#ifdef SUPPORT_SD_LOCK
-	if (sd_card->sd_lock_status & SD_UNLOCK_POW_ON)
-		goto SD_UNLOCK_ENTRY;
-#endif
 
 	retval = sd_prepare_reset(chip);
 	if (retval != STATUS_SUCCESS)
@@ -2182,7 +2134,7 @@ RTY_CMD55:
 	sd_card->sd_addr += (u32) rsp[2] << 16;
 
 	/* Get CSD register for Calculating Timing,Capacity,
-	 * Check CSD to determaine as if this is the SD ROM card */
+	 * Check CSD to determine as if this is the SD ROM card */
 	retval = sd_check_csd(chip, 1);
 	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, retval);
@@ -2190,20 +2142,6 @@ RTY_CMD55:
 	retval = sd_select_card(chip, 1);
 	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, retval);
-#ifdef SUPPORT_SD_LOCK
-SD_UNLOCK_ENTRY:
-	/* Get SD lock status */
-	retval = sd_update_lock_status(chip);
-	if (retval != STATUS_SUCCESS)
-		TRACE_RET(chip, STATUS_FAIL);
-
-	if (sd_card->sd_lock_status & SD_LOCKED) {
-		sd_card->sd_lock_status |= (SD_LOCK_1BIT_MODE | SD_PWD_EXIST);
-		return STATUS_SUCCESS;
-	} else if (!(sd_card->sd_lock_status & SD_UNLOCK_POW_ON)) {
-		sd_card->sd_lock_status &= ~SD_PWD_EXIST;
-	}
-#endif
 
 	/* ACMD42 */
 	retval =
@@ -2294,10 +2232,6 @@ SD_UNLOCK_ENTRY:
 		if (retval != STATUS_SUCCESS)
 			TRACE_RET(chip, retval);
 	}
-#ifdef SUPPORT_SD_LOCK
-	/* clear 1 bit mode status */
-	sd_card->sd_lock_status &= ~SD_LOCK_1BIT_MODE;
-#endif
 
 	if (CHK_SD30_SPEED(sd_card)) {
 		rts51x_write_register(chip, SD30_DRIVE_SEL, SD30_DRIVE_MASK,
@@ -2380,19 +2314,6 @@ SD_UNLOCK_ENTRY:
 
 	chip->card_bus_width[chip->card2lun[SD_CARD]] = 4;
 
-#ifdef SUPPORT_SD_LOCK
-	if (sd_card->sd_lock_status & SD_UNLOCK_POW_ON) {
-		rts51x_init_cmd(chip);
-
-		rts51x_add_cmd(chip, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0x02);
-		rts51x_add_cmd(chip, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 0x00);
-
-		retval = rts51x_send_cmd(chip, MODE_C, 100);
-		if (retval != STATUS_SUCCESS)
-			TRACE_RET(chip, retval);
-	}
-#endif
-
 	return STATUS_SUCCESS;
 }
 
@@ -2587,17 +2508,10 @@ static int mmc_switch_timing_bus(struct rts51x_chip *chip)
 		sd_card->capacity =
 		    ((u32) buf[5] << 24) | ((u32) buf[4] << 16) |
 		    ((u32) buf[3] << 8) | ((u32) buf[2]);
-#ifdef SUPPORT_SD_LOCK
-	if (!(sd_card->sd_lock_status & SD_SDR_RST) && CHECK_UHS50(chip))
-		card_type_mask = 0x07;
-	else
-		card_type_mask = 0x03;
-#else
 	if (CHECK_UHS50(chip))
 		card_type_mask = 0x07;
 	else
 		card_type_mask = 0x03;
-#endif
 
 	card_type = buf[1] & card_type_mask;
 	if (card_type) {
@@ -2626,15 +2540,9 @@ static int mmc_switch_timing_bus(struct rts51x_chip *chip)
 	if (mmc_test_switch_bus(chip, MMC_8BIT_BUS) == STATUS_SUCCESS) {
 		SET_MMC_8BIT(sd_card);
 		chip->card_bus_width[chip->card2lun[SD_CARD]] = 8;
-#ifdef SUPPORT_SD_LOCK
-		sd_card->sd_lock_status &= ~SD_LOCK_1BIT_MODE;
-#endif
 	} else if (mmc_test_switch_bus(chip, MMC_4BIT_BUS) == STATUS_SUCCESS) {
 		SET_MMC_4BIT(sd_card);
 		chip->card_bus_width[chip->card2lun[SD_CARD]] = 4;
-#ifdef SUPPORT_SD_LOCK
-		sd_card->sd_lock_status &= ~SD_LOCK_1BIT_MODE;
-#endif
 	} else {
 		CLR_MMC_8BIT(sd_card);
 		CLR_MMC_4BIT(sd_card);
@@ -2652,11 +2560,6 @@ static int reset_mmc(struct rts51x_chip *chip)
 	u8 change_to_ddr52 = 1;
 	u8 cmd[5];
 
-#ifdef SUPPORT_SD_LOCK
-	if (sd_card->sd_lock_status & SD_UNLOCK_POW_ON)
-		goto MMC_UNLOCK_ENTRY;
-#endif
-
 MMC_DDR_FAIL:
 
 	retval = sd_prepare_reset(chip);
@@ -2745,7 +2648,7 @@ RTY_MMC_RST:
 		TRACE_RET(chip, retval);
 
 	/* Get CSD register for Calculating Timing,Capacity
-	 * Check CSD to determaine as if this is the SD ROM card */
+	 * Check CSD to determine as if this is the SD ROM card */
 	retval = sd_check_csd(chip, 1);
 	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, retval);
@@ -2763,13 +2666,6 @@ RTY_MMC_RST:
 				0);
 	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, retval);
-#ifdef SUPPORT_SD_LOCK
-MMC_UNLOCK_ENTRY:
-	/* Get SD lock status */
-	retval = sd_update_lock_status(chip);
-	if (retval != STATUS_SUCCESS)
-		TRACE_RET(chip, STATUS_FAIL);
-#endif
 
 	RTS51X_WRITE_REG(chip, SD_CFG1, SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0);
 
@@ -2842,18 +2738,6 @@ MMC_UNLOCK_ENTRY:
 			}
 		}
 	}
-#ifdef SUPPORT_SD_LOCK
-	if (sd_card->sd_lock_status & SD_UNLOCK_POW_ON) {
-		rts51x_init_cmd(chip);
-
-		rts51x_add_cmd(chip, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0x02);
-		rts51x_add_cmd(chip, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 0x00);
-
-		retval = rts51x_send_cmd(chip, MODE_C, 100);
-		if (retval != STATUS_SUCCESS)
-			TRACE_RET(chip, retval);
-	}
-#endif
 
 	retval = rts51x_get_card_status(chip, &(chip->card_status));
 	if (retval != STATUS_SUCCESS)
@@ -2879,11 +2763,6 @@ int reset_sd_card(struct rts51x_chip *chip)
 	sd_card->capacity = 0;
 	sd_card->sd_switch_fail = 0;
 
-#ifdef SUPPORT_SD_LOCK
-	sd_card->sd_lock_status = 0;
-	sd_card->sd_erase_status = 0;
-#endif
-
 	sd_clear_reset_fail(chip);
 	enable_card_clock(chip, SD_CARD);
 
@@ -3006,7 +2885,7 @@ static int wait_data_buf_ready(struct rts51x_chip *chip)
 	TRACE_RET(chip, STATUS_FAIL);
 }
 
-void sd_stop_seq_mode(struct rts51x_chip *chip)
+static void sd_stop_seq_mode(struct rts51x_chip *chip)
 {
 	struct sd_info *sd_card = &(chip->sd_card);
 	int retval;
@@ -3300,7 +3179,7 @@ void sd_cleanup_work(struct rts51x_chip *chip)
 	}
 }
 
-inline void sd_fill_power_off_card3v3(struct rts51x_chip *chip)
+static inline void sd_fill_power_off_card3v3(struct rts51x_chip *chip)
 {
 	rts51x_add_cmd(chip, WRITE_REG_CMD, CARD_CLK_EN, SD_CLK_EN, 0);
 
@@ -3322,7 +3201,7 @@ inline void sd_fill_power_off_card3v3(struct rts51x_chip *chip)
 	}
 }
 
-int sd_power_off_card3v3(struct rts51x_chip *chip)
+static int sd_power_off_card3v3(struct rts51x_chip *chip)
 {
 	int retval;
 
@@ -3346,17 +3225,12 @@ int release_sd_card(struct rts51x_chip *chip)
 	struct sd_info *sd_card = &(chip->sd_card);
 	int retval;
 
-	RTS51X_DEBUGP("elease_sd_card\n");
+	RTS51X_DEBUGP("release_sd_card\n");
 
 	chip->card_ready &= ~SD_CARD;
 	chip->card_fail &= ~SD_CARD;
 	chip->card_wp &= ~SD_CARD;
 
-#ifdef SUPPORT_SD_LOCK
-	sd_card->sd_lock_status = 0;
-	sd_card->sd_erase_status = 0;
-#endif
-
 	memset(sd_card->raw_csd, 0, 16);
 	memset(sd_card->raw_scr, 0, 8);
 
diff --git a/drivers/staging/rts5139/sd.h b/drivers/staging/rts5139/sd.h
index 0805edcaea86..de155d8e682d 100644
--- a/drivers/staging/rts5139/sd.h
+++ b/drivers/staging/rts5139/sd.h
@@ -141,29 +141,6 @@
 #define	SWITCH_MODE_ERR	  0x06
 #define	SWITCH_PASS	  0x07
 
-#ifdef SUPPORT_SD_LOCK
-/* CMD42 Parameter */
-#define SD_ERASE		0x08
-#define SD_LOCK			0x04
-#define SD_UNLOCK		0x00
-#define SD_CLR_PWD		0x02
-#define SD_SET_PWD		0x01
-
-#define SD_PWD_LEN		0x10
-
-/* SD lock unlock Status */
-#define SD_LOCKED		0x80	/* Global lock status */
-#define SD_LOCK_1BIT_MODE	0x40 /**/
-#define SD_PWD_EXIST		0x20
-#define SD_UNLOCK_POW_ON	0x01 /**/
-#define SD_SDR_RST		0x02 /* Reset SD30 card with current DDR mode to SDR mode. */
-/* g_bySDEraseStatus */
-#define SD_NOT_ERASE		0x00
-#define SD_UNDER_ERASING	0x01
-#define SD_COMPLETE_ERASE	0x02
-/* SD_RW FAIL status */
-#define SD_RW_FORBIDDEN		0x0F	/* read/write is forbidden (SD card)  */
-#endif
 /* Function Group Definition */
 /* Function Group 1 */
 #define	HS_SUPPORT			0x01
@@ -282,17 +259,11 @@ struct timing_phase_path {
 int sd_select_card(struct rts51x_chip *chip, int select);
 int reset_sd_card(struct rts51x_chip *chip);
 int sd_switch_clock(struct rts51x_chip *chip);
-void sd_stop_seq_mode(struct rts51x_chip *chip);
 int sd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
 	  u16 sector_cnt);
 void sd_cleanup_work(struct rts51x_chip *chip);
-int sd_power_off_card3v3(struct rts51x_chip *chip);
 int release_sd_card(struct rts51x_chip *chip);
 
-#ifdef SUPPORT_SD_LOCK
-int sd_update_lock_status(struct rts51x_chip *chip);
-#endif
-
 #ifdef SUPPORT_CPRM
 extern int reset_sd(struct rts51x_chip *chip);
 extern int sd_check_data0_status(struct rts51x_chip *chip);
diff --git a/drivers/staging/rts5139/sd_cprm.c b/drivers/staging/rts5139/sd_cprm.c
index d5969d992d84..f8c60711f710 100644
--- a/drivers/staging/rts5139/sd_cprm.c
+++ b/drivers/staging/rts5139/sd_cprm.c
@@ -77,12 +77,7 @@ static inline int get_rsp_type(u8 rsp_code, u8 *rsp_type, int *rsp_len)
 	return STATUS_SUCCESS;
 }
 
-int soft_reset_sd_card(struct rts51x_chip *chip)
-{
-	return reset_sd(chip);
-}
-
-int ext_sd_send_cmd_get_rsp(struct rts51x_chip *chip, u8 cmd_idx,
+static int ext_sd_send_cmd_get_rsp(struct rts51x_chip *chip, u8 cmd_idx,
 			    u32 arg, u8 rsp_type, u8 *rsp, int rsp_len,
 			    int special_check)
 {
@@ -206,11 +201,7 @@ RTY_SEND_CMD:
 			if (buf[1] & 0x80)
 				TRACE_RET(chip, STATUS_FAIL);
 		}
-#ifdef SUPPORT_SD_LOCK
-		if (buf[1] & 0x7D) {
-#else
 		if (buf[1] & 0x7F) {
-#endif
 			TRACE_RET(chip, STATUS_FAIL);
 		}
 		if (buf[2] & 0xF8)
@@ -233,7 +224,7 @@ RTY_SEND_CMD:
 	return STATUS_SUCCESS;
 }
 
-int ext_sd_get_rsp(struct rts51x_chip *chip, int len, u8 *rsp, u8 rsp_type)
+static int ext_sd_get_rsp(struct rts51x_chip *chip, int len, u8 *rsp, u8 rsp_type)
 {
 	int retval, rsp_len;
 	u16 reg_addr;
@@ -305,26 +296,8 @@ int ext_sd_execute_no_data(struct rts51x_chip *chip, unsigned int lun,
 	retval = sd_switch_clock(chip);
 	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, TRANSPORT_FAILED);
-#ifdef SUPPORT_SD_LOCK
-	if ((sd_card->sd_lock_status & SD_LOCK_1BIT_MODE) == 0) {
-		if (CHK_MMC_8BIT(sd_card)) {
-			retval =
-			    rts51x_write_register(chip, SD_CFG1, 0x03,
-						  SD_BUS_WIDTH_8);
-			if (retval != STATUS_SUCCESS)
-				TRACE_RET(chip, TRANSPORT_FAILED);
-		} else if (CHK_SD(sd_card) || CHK_MMC_4BIT(sd_card)) {
-			retval =
-			    rts51x_write_register(chip, SD_CFG1, 0x03,
-						  SD_BUS_WIDTH_4);
-			if (retval != STATUS_SUCCESS)
-				TRACE_RET(chip, TRANSPORT_FAILED);
-		}
-	}
-#else
 	/* Set H/W SD/MMC Bus Width */
 	rts51x_write_register(chip, SD_CFG1, 0x03, SD_BUS_WIDTH_4);
-#endif
 
 	if (standby) {
 		retval = sd_select_card(chip, 0);
@@ -350,12 +323,6 @@ int ext_sd_execute_no_data(struct rts51x_chip *chip, unsigned int lun,
 		if (retval != STATUS_SUCCESS)
 			TRACE_GOTO(chip, SD_Execute_Cmd_Failed);
 	}
-#ifdef SUPPORT_SD_LOCK
-	/* Get SD lock status */
-	retval = sd_update_lock_status(chip);
-	if (retval != STATUS_SUCCESS)
-		TRACE_GOTO(chip, SD_Execute_Cmd_Failed);
-#endif
 
 	return TRANSPORT_GOOD;
 
@@ -399,21 +366,7 @@ int ext_sd_execute_read_data(struct rts51x_chip *chip, unsigned int lun,
 	retval = sd_switch_clock(chip);
 	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, TRANSPORT_FAILED);
-#ifdef SUPPORT_SD_LOCK
-	if ((sd_card->sd_lock_status & SD_LOCK_1BIT_MODE) == 0) {
-		if (CHK_MMC_8BIT(sd_card))
-			bus_width = SD_BUS_WIDTH_8;
-		else if (CHK_SD(sd_card) || CHK_MMC_4BIT(sd_card))
-			bus_width = SD_BUS_WIDTH_4;
-		else
-			bus_width = SD_BUS_WIDTH_1;
-	} else {
-		bus_width = SD_BUS_WIDTH_4;
-	}
-	RTS51X_DEBUGP("bus_width = %d\n", bus_width);
-#else
 	bus_width = SD_BUS_WIDTH_4;
-#endif
 
 	if (data_len < 512) {
 		retval = ext_sd_send_cmd_get_rsp(chip, SET_BLOCKLEN, data_len,
@@ -599,11 +552,6 @@ int ext_sd_execute_write_data(struct rts51x_chip *chip, unsigned int lun,
 	int cmd13_checkbit = 0, write_err = 0;
 	u8 rsp_type;
 	u32 i;
-#ifdef SUPPORT_SD_LOCK
-	int lock_cmd_fail = 0;
-	u8 sd_lock_state = 0;
-	u8 lock_cmd_type = 0;
-#endif
 
 	if (sd_card->pre_cmd_err) {
 		sd_card->pre_cmd_err = 0;
@@ -614,12 +562,6 @@ int ext_sd_execute_write_data(struct rts51x_chip *chip, unsigned int lun,
 	retval = sd_switch_clock(chip);
 	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, STATUS_FAIL);
-#ifdef SUPPORT_SD_LOCK
-	if (cmd_idx == LOCK_UNLOCK) {
-		sd_lock_state = sd_card->sd_lock_status;
-		sd_lock_state &= SD_LOCKED;
-	}
-#endif
 
 	retval = get_rsp_type(rsp_code, &rsp_type, &rsp_len);
 	if (retval != STATUS_SUCCESS) {
@@ -631,25 +573,7 @@ int ext_sd_execute_write_data(struct rts51x_chip *chip, unsigned int lun,
 	retval = sd_switch_clock(chip);
 	if (retval != STATUS_SUCCESS)
 		TRACE_RET(chip, TRANSPORT_FAILED);
-#ifdef SUPPORT_SD_LOCK
-	if ((sd_card->sd_lock_status & SD_LOCK_1BIT_MODE) == 0) {
-		if (CHK_MMC_8BIT(sd_card)) {
-			retval =
-			    rts51x_write_register(chip, SD_CFG1, 0x03,
-						  SD_BUS_WIDTH_8);
-			if (retval != STATUS_SUCCESS)
-				TRACE_RET(chip, TRANSPORT_FAILED);
-		} else if (CHK_SD(sd_card) || CHK_MMC_4BIT(sd_card)) {
-			retval =
-			    rts51x_write_register(chip, SD_CFG1, 0x03,
-						  SD_BUS_WIDTH_4);
-			if (retval != STATUS_SUCCESS)
-				TRACE_RET(chip, TRANSPORT_FAILED);
-		}
-	}
-#else
 	rts51x_write_register(chip, SD_CFG1, 0x03, SD_BUS_WIDTH_4);
-#endif
 
 	if (data_len < 512) {
 		retval = ext_sd_send_cmd_get_rsp(chip, SET_BLOCKLEN, data_len,
@@ -692,10 +616,6 @@ int ext_sd_execute_write_data(struct rts51x_chip *chip, unsigned int lun,
 		else
 			memcpy(buf, data_buf, data_len);
 
-#ifdef SUPPORT_SD_LOCK
-		if (cmd_idx == LOCK_UNLOCK)
-			lock_cmd_type = buf[0] & 0x0F;
-#endif
 
 		if (data_len > 256) {
 			rts51x_init_cmd(chip);
@@ -802,29 +722,6 @@ int ext_sd_execute_write_data(struct rts51x_chip *chip, unsigned int lun,
 				      SD_STOP | SD_CLR_ERR);
 		TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
 	}
-#ifdef SUPPORT_SD_LOCK
-	if (cmd_idx == LOCK_UNLOCK) {
-		if (lock_cmd_type == SD_ERASE) {
-			sd_card->sd_erase_status = SD_UNDER_ERASING;
-			scsi_set_resid(srb, 0);
-			return TRANSPORT_GOOD;
-		}
-
-		rts51x_init_cmd(chip);
-		rts51x_add_cmd(chip, CHECK_REG_CMD, SD_BUS_STAT, SD_DAT0_STATUS,
-			       SD_DAT0_STATUS);
-		retval = rts51x_send_cmd(chip, MODE_CR, 250);
-		if (retval != STATUS_SUCCESS)
-			TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
-		rts51x_get_rsp(chip, 1, 200); /* Don't care return value */
-
-		retval = sd_update_lock_status(chip);
-		if (retval != STATUS_SUCCESS) {
-			RTS51X_DEBUGP("Lock command fail!\n");
-			lock_cmd_fail = 1;
-		}
-	}
-#endif /* SUPPORT_SD_LOCK */
 
 	if (standby) {
 		retval = sd_select_card(chip, 1);
@@ -865,51 +762,6 @@ int ext_sd_execute_write_data(struct rts51x_chip *chip, unsigned int lun,
 	}
 	if (retval != STATUS_SUCCESS)
 		TRACE_GOTO(chip, SD_Execute_Write_Cmd_Failed);
-#ifdef SUPPORT_SD_LOCK
-	if (cmd_idx == LOCK_UNLOCK) {
-		if (!lock_cmd_fail) {
-			RTS51X_DEBUGP("lock_cmd_type = 0x%x\n",
-				       lock_cmd_type);
-			if (lock_cmd_type & SD_CLR_PWD)
-				sd_card->sd_lock_status &= ~SD_PWD_EXIST;
-			if (lock_cmd_type & SD_SET_PWD)
-				sd_card->sd_lock_status |= SD_PWD_EXIST;
-		}
-
-		RTS51X_DEBUGP("sd_lock_state = 0x%x,"
-				"sd_card->sd_lock_status = 0x%x\n",
-				sd_lock_state, sd_card->sd_lock_status);
-		if (sd_lock_state ^ (sd_card->sd_lock_status & SD_LOCKED)) {
-			sd_card->sd_lock_notify = 1;
-			if (sd_lock_state) {
-				if (sd_card->sd_lock_status &
-						SD_LOCK_1BIT_MODE) {
-					sd_card->sd_lock_status |=
-					    (SD_UNLOCK_POW_ON | SD_SDR_RST);
-					if (CHK_SD(sd_card)) {
-						retval = reset_sd(chip);
-						if (retval != STATUS_SUCCESS) {
-							sd_card->sd_lock_status
-							&= ~(SD_UNLOCK_POW_ON |
-							      SD_SDR_RST);
-							TRACE_GOTO(chip,
-								   SD_Execute_Write_Cmd_Failed);
-						}
-					}
-
-					sd_card->sd_lock_status &=
-					    ~(SD_UNLOCK_POW_ON | SD_SDR_RST);
-				}
-			}
-		}
-	}
-
-	if (lock_cmd_fail) {
-		scsi_set_resid(srb, 0);
-		set_sense_type(chip, lun, SENSE_TYPE_NO_SENSE);
-		TRACE_RET(chip, TRANSPORT_FAILED);
-	}
-#endif /* SUPPORT_SD_LOCK */
 
 	return TRANSPORT_GOOD;
 
@@ -1173,30 +1025,18 @@ int sd_hw_rst(struct scsi_cmnd *srb, struct rts51x_chip *chip)
 	switch (srb->cmnd[1] & 0x0F) {
 	case 0:
 		/* SD Card Power Off -> ON and Initialization */
-#ifdef SUPPORT_SD_LOCK
-		if (0x64 == srb->cmnd[9]) {
-			/* Command Mode */
-			sd_card->sd_lock_status |= SD_SDR_RST;
-		}
-#endif /* SUPPORT_SD_LOCK */
 		retval = reset_sd_card(chip);
 		if (retval != STATUS_SUCCESS) {
-#ifdef SUPPORT_SD_LOCK
-			sd_card->sd_lock_status &= ~SD_SDR_RST;
-#endif
 			set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
 			sd_card->pre_cmd_err = 1;
 			TRACE_RET(chip, TRANSPORT_FAILED);
 		}
-#ifdef SUPPORT_SD_LOCK
-		sd_card->sd_lock_status &= ~SD_SDR_RST;
-#endif
 		break;
 
 	case 1:
 		/* reset CMD(CMD0) and Initialization
 		 * (without SD Card Power Off -> ON) */
-		retval = soft_reset_sd_card(chip);
+		retval = reset_sd(chip);
 		if (retval != STATUS_SUCCESS) {
 			set_sense_type(chip, lun, SENSE_TYPE_MEDIA_NOT_PRESENT);
 			sd_card->pre_cmd_err = 1;
diff --git a/drivers/staging/rts5139/xd.c b/drivers/staging/rts5139/xd.c
index 5820605d1806..58f8ba24caed 100644
--- a/drivers/staging/rts5139/xd.c
+++ b/drivers/staging/rts5139/xd.c
@@ -47,13 +47,6 @@ static inline void xd_set_err_code(struct rts51x_chip *chip, u8 err_code)
 	xd_card->err_code = err_code;
 }
 
-static inline int xd_check_err_code(struct rts51x_chip *chip, u8 err_code)
-{
-	struct xd_info *xd_card = &(chip->xd_card);
-
-	return (xd_card->err_code == err_code);
-}
-
 static int xd_set_init_para(struct rts51x_chip *chip)
 {
 	struct xd_info *xd_card = &(chip->xd_card);
@@ -862,6 +855,8 @@ static void xd_set_l2p_tbl(struct rts51x_chip *chip, int zone_no, u16 log_off,
 	zone->l2p_table[log_off] = phy_off;
 }
 
+static int xd_delay_write(struct rts51x_chip *chip);
+
 static u32 xd_get_l2p_tbl(struct rts51x_chip *chip, int zone_no, u16 log_off)
 {
 	struct xd_info *xd_card = &(chip->xd_card);
@@ -1182,91 +1177,6 @@ static int xd_copy_page(struct rts51x_chip *chip,
 	return STATUS_SUCCESS;
 }
 
-#ifdef XD_SPEEDUP
-static int xd_auto_copy_page(struct rts51x_chip *chip,
-			     u32 old_blk, u32 new_blk,
-			     u8 start_page, u8 end_page)
-{
-	struct xd_info *xd_card = &(chip->xd_card);
-	u32 old_page, new_page;
-	int retval;
-	u8 page_count;
-
-	RTS51X_DEBUGP("Auto copy page from block 0x%x to block 0x%x\n",
-		       old_blk, new_blk);
-
-	if (start_page > end_page)
-		TRACE_RET(chip, STATUS_FAIL);
-
-	page_count = end_page - start_page;
-
-	if ((old_blk == BLK_NOT_FOUND) || (new_blk == BLK_NOT_FOUND))
-		TRACE_RET(chip, STATUS_FAIL);
-
-	old_page = (old_blk << xd_card->block_shift) + start_page;
-	new_page = (new_blk << xd_card->block_shift) + start_page;
-
-	XD_CLR_BAD_NEWBLK(xd_card);
-
-	rts51x_init_cmd(chip);
-
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_WAITTIME, 0x03, WAIT_FF);
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_PAGELEN, 0xFF, page_count);
-
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_READADDR0, 0xFF, 0);
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_READADDR1, 0xFF,
-		       (u8) old_page);
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_READADDR2, 0xFF,
-		       (u8) (old_page >> 8));
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_READADDR3, 0xFF,
-		       (u8) (old_page >> 16));
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_READADDR4, 0xFF, 0);
-
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_WRITEADDR0, 0xFF, 0);
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_WRITEADDR1, 0xFF,
-		       (u8) new_page);
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_WRITEADDR2, 0xFF,
-		       (u8) (new_page >> 8));
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_WRITEADDR3, 0xFF,
-		       (u8) (new_page >> 16));
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CP_WRITEADDR4, 0xFF, 0);
-
-	rts51x_add_cmd(chip, WRITE_REG_CMD, CARD_DATA_SOURCE, 0x01,
-		       PINGPONG_BUFFER);
-
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CFG,
-		       XD_BA_TRANSFORM | XD_ADDR_MASK, 0 | xd_card->addr_cycle);
-
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_CHK_DATA_STATUS,
-		       XD_AUTO_CHK_DATA_STATUS, 0);
-	rts51x_add_cmd(chip, WRITE_REG_CMD, XD_TRANSFER, 0xFF,
-		       XD_TRANSFER_START | XD_COPY_PAGES);
-	rts51x_add_cmd(chip, CHECK_REG_CMD, XD_TRANSFER, XD_TRANSFER_END,
-		       XD_TRANSFER_END);
-
-	retval = rts51x_send_cmd(chip, MODE_CR, 100);
-	if (retval != STATUS_SUCCESS) {
-		rts51x_clear_xd_error(chip);
-		TRACE_GOTO(chip, Copy_Fail);
-	}
-
-	retval = rts51x_get_rsp(chip, 1, 800);
-	if (retval != STATUS_SUCCESS) {
-		rts51x_clear_xd_error(chip);
-		TRACE_GOTO(chip, Copy_Fail);
-	}
-
-	return STATUS_SUCCESS;
-
-Copy_Fail:
-	retval = xd_copy_page(chip, old_blk, new_blk, start_page, end_page);
-	if (retval != STATUS_SUCCESS)
-		TRACE_RET(chip, retval);
-
-	return STATUS_SUCCESS;
-}
-#endif
-
 static int xd_reset_cmd(struct rts51x_chip *chip)
 {
 	int retval;
@@ -1686,15 +1596,9 @@ Fail:
 			XD_CLR_BAD_OLDBLK(xd_card);
 			TRACE_RET(chip, STATUS_FAIL);
 		}
-#ifdef XD_SPEEDUP
-		retval =
-		    xd_auto_copy_page(chip, phy_blk, new_blk, 0,
-				      xd_card->page_off + 1);
-#else
 		retval =
 		    xd_copy_page(chip, phy_blk, new_blk, 0,
 				 xd_card->page_off + 1);
-#endif
 		if (retval != STATUS_SUCCESS) {
 			if (!XD_CHK_BAD_NEWBLK(xd_card)) {
 				retval = xd_erase_block(chip, new_blk);
@@ -1741,13 +1645,8 @@ static int xd_finish_write(struct rts51x_chip *chip,
 			TRACE_RET(chip, STATUS_FAIL);
 		}
 	} else {
-#ifdef XD_SPEEDUP
-		retval = xd_auto_copy_page(chip, old_blk, new_blk,
-					   page_off, xd_card->page_off + 1);
-#else
 		retval = xd_copy_page(chip, old_blk, new_blk,
 				      page_off, xd_card->page_off + 1);
-#endif
 		if (retval != STATUS_SUCCESS) {
 			if (!XD_CHK_BAD_NEWBLK(xd_card)) {
 				retval = xd_erase_block(chip, new_blk);
@@ -1789,11 +1688,7 @@ static int xd_prepare_write(struct rts51x_chip *chip,
 				old_blk, new_blk, log_blk, (int)page_off);
 
 	if (page_off) {
-#ifdef XD_SPEEDUP
-		retval = xd_auto_copy_page(chip, old_blk, new_blk, 0, page_off);
-#else
 		retval = xd_copy_page(chip, old_blk, new_blk, 0, page_off);
-#endif
 		if (retval != STATUS_SUCCESS)
 			TRACE_RET(chip, retval);
 	}
@@ -1922,7 +1817,7 @@ Fail:
 	TRACE_RET(chip, STATUS_FAIL);
 }
 
-int xd_delay_write(struct rts51x_chip *chip)
+static int xd_delay_write(struct rts51x_chip *chip)
 {
 	struct xd_info *xd_card = &(chip->xd_card);
 	struct xd_delay_write_tag *delay_write = &(xd_card->delay_write);
@@ -1999,18 +1894,11 @@ int xd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
 		    (start_page > delay_write->pageoff)) {
 			delay_write->delay_write_flag = 0;
 			if (delay_write->old_phyblock != BLK_NOT_FOUND) {
-#ifdef XD_SPEEDUP
-				retval = xd_auto_copy_page(chip,
-					delay_write->old_phyblock,
-					delay_write->new_phyblock,
-					delay_write->pageoff, start_page);
-#else
 				retval = xd_copy_page(chip,
 						      delay_write->old_phyblock,
 						      delay_write->new_phyblock,
 						      delay_write->pageoff,
 						      start_page);
-#endif
 				if (retval != STATUS_SUCCESS) {
 					set_sense_type(chip, lun,
 						SENSE_TYPE_MEDIA_WRITE_ERR);
@@ -2198,7 +2086,7 @@ void xd_cleanup_work(struct rts51x_chip *chip)
 	}
 }
 
-int xd_power_off_card3v3(struct rts51x_chip *chip)
+static int xd_power_off_card3v3(struct rts51x_chip *chip)
 {
 	int retval;
 
@@ -2232,7 +2120,7 @@ int release_xd_card(struct rts51x_chip *chip)
 	struct xd_info *xd_card = &(chip->xd_card);
 	int retval;
 
-	RTS51X_DEBUGP("elease_xd_card\n");
+	RTS51X_DEBUGP("release_xd_card\n");
 
 	chip->card_ready &= ~XD_CARD;
 	chip->card_fail &= ~XD_CARD;
diff --git a/drivers/staging/rts5139/xd.h b/drivers/staging/rts5139/xd.h
index fa695903ba65..55e4205e23fa 100644
--- a/drivers/staging/rts5139/xd.h
+++ b/drivers/staging/rts5139/xd.h
@@ -182,12 +182,10 @@
 #define	CIS1_9			(256 + 9)
 
 int reset_xd_card(struct rts51x_chip *chip);
-int xd_delay_write(struct rts51x_chip *chip);
 int xd_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
 	  u16 sector_cnt);
 void xd_free_l2p_tbl(struct rts51x_chip *chip);
 void xd_cleanup_work(struct rts51x_chip *chip);
-int xd_power_off_card3v3(struct rts51x_chip *chip);
 int release_xd_card(struct rts51x_chip *chip);
 
 #endif /* __RTS51X_XD_H */
diff --git a/drivers/staging/rts_pstor/ms.c b/drivers/staging/rts_pstor/ms.c
index f9a4498984cc..0bf6d95b3fab 100644
--- a/drivers/staging/rts_pstor/ms.c
+++ b/drivers/staging/rts_pstor/ms.c
@@ -4136,7 +4136,7 @@ int mg_set_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip)
 #else
 	retval = ms_transfer_data(chip, MS_TM_AUTO_WRITE, PRO_WRITE_LONG_DATA,
 				2, WAIT_INT, 0, 0, buf + 4, 1024);
-	if ((retval != STATUS_SUCCESS) || check_ms_err(chip) {
+	if ((retval != STATUS_SUCCESS) || check_ms_err(chip)) {
 		rtsx_clear_ms_error(chip);
 		if (ms_card->mg_auth == 0) {
 			if ((buf[5] & 0xC0) != 0) {
diff --git a/drivers/staging/rts_pstor/rtsx_transport.c b/drivers/staging/rts_pstor/rtsx_transport.c
index 9b2e5c99870f..54a474235f26 100644
--- a/drivers/staging/rts_pstor/rtsx_transport.c
+++ b/drivers/staging/rts_pstor/rtsx_transport.c
@@ -130,7 +130,7 @@ unsigned int rtsx_stor_access_xfer_buf(unsigned char *buffer,
 /* Store the contents of buffer into srb's transfer buffer and set the
 * SCSI residue. */
 void rtsx_stor_set_xfer_buf(unsigned char *buffer,
-       unsigned int buflen, struct scsi_cmnd *srb)
+	unsigned int buflen, struct scsi_cmnd *srb)
 {
 	unsigned int index = 0, offset = 0;
 
@@ -141,7 +141,7 @@ void rtsx_stor_set_xfer_buf(unsigned char *buffer,
 }
 
 void rtsx_stor_get_xfer_buf(unsigned char *buffer,
-       unsigned int buflen, struct scsi_cmnd *srb)
+	unsigned int buflen, struct scsi_cmnd *srb)
 {
 	unsigned int index = 0, offset = 0;
 
diff --git a/drivers/staging/sep/sep_driver_config.h b/drivers/staging/sep/sep_driver_config.h
index fa7c0d09bfa5..9d9fc7c94a6e 100644
--- a/drivers/staging/sep/sep_driver_config.h
+++ b/drivers/staging/sep/sep_driver_config.h
@@ -68,11 +68,11 @@
 #define SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE		16
 
 /* flag that signifies tah the lock is
-currently held by the proccess (struct file) */
+currently held by the process (struct file) */
 #define SEP_DRIVER_OWN_LOCK_FLAG                        1
 
 /* flag that signifies tah the lock is currently NOT
-held by the proccess (struct file) */
+held by the process (struct file) */
 #define SEP_DRIVER_DISOWN_LOCK_FLAG                     0
 
 /* indicates whether driver has mapped/unmapped shared area */
@@ -280,7 +280,7 @@ held by the proccess (struct file) */
 
 /*
  * Used to limit number of concurrent processes
- * allowed to allocte dynamic buffers in fastcall
+ * allowed to allocate dynamic buffers in fastcall
  * interface.
  */
 #define SEP_DOUBLEBUF_USERS_LIMIT		3
diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
index f1701bc6e312..df1d13e96fcd 100644
--- a/drivers/staging/sep/sep_main.c
+++ b/drivers/staging/sep/sep_main.c
@@ -786,7 +786,7 @@ static unsigned int sep_poll(struct file *filp, poll_table *wait)
 		"[PID%d] poll: send_ct is %lx reply ct is %lx\n",
 			current->pid, sep->send_ct, sep->reply_ct);
 
-	/* Check if error occured during poll */
+	/* Check if error occurred during poll */
 	retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
 	if ((retval2 != 0x0) && (retval2 != 0x8)) {
 		dev_dbg(&sep->pdev->dev, "[PID%d] poll; poll error %x\n",
@@ -1160,7 +1160,7 @@ static int sep_lock_kernel_pages(struct sep_device *sep,
 
 	/* Put mapped kernel sg into kernel resource array */
 
-	/* Set output params acording to the in_out flag */
+	/* Set output params according to the in_out flag */
 	if (in_out_flag == SEP_DRIVER_IN_FLAG) {
 		*lli_array_ptr = lli_array;
 		dma_ctx->dma_res_arr[dma_ctx->nr_dcb_creat].in_num_pages =
@@ -1358,7 +1358,7 @@ static int sep_lock_user_pages(struct sep_device *sep,
 			lli_array[num_pages - 1].block_size);
 	}
 
-	/* Set output params acording to the in_out flag */
+	/* Set output params according to the in_out flag */
 	if (in_out_flag == SEP_DRIVER_IN_FLAG) {
 		*lli_array_ptr = lli_array;
 		dma_ctx->dma_res_arr[dma_ctx->nr_dcb_creat].in_num_pages =
@@ -2038,7 +2038,7 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
 
 		/*
 		 * If this is not the last table -
-		 * then allign it to the block size
+		 * then align it to the block size
 		 */
 		if (!last_table_flag)
 			table_data_size =
@@ -3033,7 +3033,7 @@ static int sep_free_dcb_handler(struct sep_device *sep,
  * @cmd: command
  * @arg: pointer to argument structure
  *
- * Implement the ioctl methods availble on the SEP device.
+ * Implement the ioctl methods available on the SEP device.
  */
 static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
@@ -4460,7 +4460,7 @@ static int sep_pm_runtime_suspend(struct device *dev)
  * @sep_pm_runtime_resume:	resume- no communication with cpu & main memory
  * @sep_pm_runtime_suspend:	suspend- no communication with cpu & main memory
  * @sep_pci_suspend:		suspend - main memory is still ON
- * @sep_pci_resume:		resume - main meory is still ON
+ * @sep_pci_resume:		resume - main memory is still ON
  */
 static const struct dev_pm_ops sep_pm = {
 	.runtime_resume = sep_pm_runtime_resume,
diff --git a/drivers/staging/serial/68360serial.c b/drivers/staging/serial/68360serial.c
deleted file mode 100644
index daf0b1d0dc28..000000000000
--- a/drivers/staging/serial/68360serial.c
+++ /dev/null
@@ -1,2979 +0,0 @@
-/*
- *  UART driver for 68360 CPM SCC or SMC
- *  Copyright (c) 2000 D. Jeff Dionne <jeff@uclinux.org>,
- *  Copyright (c) 2000 Michael Leslie <mleslie@lineo.ca>
- *  Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *
- * I used the serial.c driver as the framework for this driver.
- * Give credit to those guys.
- * The original code was written for the MBX860 board.  I tried to make
- * it generic, but there may be some assumptions in the structures that
- * have to be fixed later.
- * To save porting time, I did not bother to change any object names
- * that are not accessed outside of this file.
- * It still needs lots of work........When it was easy, I included code
- * to support the SCCs, but this has never been tested, nor is it complete.
- * Only the SCCs support modem control, so that is not complete either.
- *
- * This module exports the following rs232 io functions:
- *
- *	int rs_360_init(void);
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serialP.h> 
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/irq.h>
-#include <asm/m68360.h>
-#include <asm/commproc.h>
-
- 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-extern int  kgdb_output_string (const char* s, unsigned int count);
-#endif
-
-
-/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */
-#include <linux/console.h>
-#include <linux/jiffies.h>
-
-/* this defines the index into rs_table for the port to use
- */
-#ifndef CONFIG_SERIAL_CONSOLE_PORT
-#define CONFIG_SERIAL_CONSOLE_PORT	1 /* ie SMC2 - note USE_SMC2 must be defined */
-#endif
-/* #endif */
-
-#if 0
-/* SCC2 for console
- */
-#undef CONFIG_SERIAL_CONSOLE_PORT
-#define CONFIG_SERIAL_CONSOLE_PORT	2
-#endif
-
-
-#define TX_WAKEUP	ASYNC_SHARE_IRQ
-
-static char *serial_name = "CPM UART driver";
-static char *serial_version = "0.03";
-
-static struct tty_driver *serial_driver;
-int serial_console_setup(struct console *co, char *options);
-
-/*
- * Serial driver configuration section.  Here are the various options:
- */
-#define SERIAL_PARANOIA_CHECK
-#define CONFIG_SERIAL_NOPAUSE_IO
-#define SERIAL_DO_RESTART
-
-/* Set of debugging defines */
-
-#undef SERIAL_DEBUG_INTR
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-
-#define _INLINE_ inline
-  
-#define DBG_CNT(s)
-
-/* We overload some of the items in the data structure to meet our
- * needs.  For example, the port address is the CPM parameter ram
- * offset for the SCC or SMC.  The maximum number of ports is 4 SCCs and
- * 2 SMCs.  The "hub6" field is used to indicate the channel number, with
- * a flag indicating SCC or SMC, and the number is used as an index into
- * the CPM parameter area for this device.
- * The "type" field is currently set to 0, for PORT_UNKNOWN.  It is
- * not currently used.  I should probably use it to indicate the port
- * type of SMC or SCC.
- * The SMCs do not support any modem control signals.
- */
-#define smc_scc_num	hub6
-#define NUM_IS_SCC	((int)0x00010000)
-#define PORT_NUM(P)	((P) & 0x0000ffff)
-
-
-#if defined (CONFIG_UCQUICC)
-
-volatile extern void *_periph_base;
-/* sipex transceiver
- *   mode bits for       are on pins
- *
- *    SCC2                d16..19
- *    SCC3                d20..23
- *    SCC4                d24..27
- */
-#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1)))
-
-static uint sipex_mode_bits = 0x00000000;
-
-#endif
-
-/* There is no `serial_state' defined back here in 2.0.
- * Try to get by with serial_struct
- */
-/* #define serial_state serial_struct */
-
-/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few
- * extras: */
-
-#if 0
-struct async_icount_24 {
-	__u32   cts, dsr, rng, dcd, tx, rx;
-	__u32   frame, parity, overrun, brk;
-	__u32   buf_overrun;
-} icount;
-#endif
-
-#if 0
-
-struct serial_state {
-        int     magic;
-        int     baud_base;
-        unsigned long   port;
-        int     irq;
-        int     flags;
-        int     hub6;
-        int     type;
-        int     line;
-        int     revision;       /* Chip revision (950) */
-        int     xmit_fifo_size;
-        int     custom_divisor;
-        int     count;
-        u8      *iomem_base;
-        u16     iomem_reg_shift;
-        unsigned short  close_delay;
-        unsigned short  closing_wait; /* time to wait before closing */
-        struct async_icount_24     icount; 
-        int     io_type;
-        struct async_struct *info;
-};
-#endif
-
-#define SSTATE_MAGIC 0x5302
-
-
-
-/* SMC2 is sometimes used for low performance TDM interfaces.  Define
- * this as 1 if you want SMC2 as a serial port UART managed by this driver.
- * Define this as 0 if you wish to use SMC2 for something else.
- */
-#define USE_SMC2 1
-
-#if 0
-/* Define SCC to ttySx mapping. */
-#define SCC_NUM_BASE	(USE_SMC2 + 1)	/* SCC base tty "number" */
-
-/* Define which SCC is the first one to use for a serial port.  These
- * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used
- * for Ethernet, and the first available SCC for serial UART is SCC2.
- * NOTE:  IF YOU CHANGE THIS, you have to change the PROFF_xxx and
- * interrupt vectors in the table below to match.
- */
-#define SCC_IDX_BASE	1	/* table index */
-#endif
-
-
-/* Processors other than the 860 only get SMCs configured by default.
- * Either they don't have SCCs or they are allocated somewhere else.
- * Of course, there are now 860s without some SCCs, so we will need to
- * address that someday.
- * The Embedded Planet Multimedia I/O cards use TDM interfaces to the
- * stereo codec parts, and we use SMC2 to help support that.
- */
-static struct serial_state rs_table[] = {
-/*  type   line   PORT           IRQ       FLAGS  smc_scc_num (F.K.A. hub6) */
-	{  0,     0, PRSLOT_SMC1, CPMVEC_SMC1,   0,    0 }    /* SMC1 ttyS0 */
-#if USE_SMC2
-	,{ 0,     0, PRSLOT_SMC2, CPMVEC_SMC2,   0,    1 }     /* SMC2 ttyS1 */
-#endif
-
-#if defined(CONFIG_SERIAL_68360_SCC)
-	,{ 0,     0, PRSLOT_SCC2, CPMVEC_SCC2,   0, (NUM_IS_SCC | 1) }    /* SCC2 ttyS2 */
-	,{ 0,     0, PRSLOT_SCC3, CPMVEC_SCC3,   0, (NUM_IS_SCC | 2) }    /* SCC3 ttyS3 */
-	,{ 0,     0, PRSLOT_SCC4, CPMVEC_SCC4,   0, (NUM_IS_SCC | 3) }    /* SCC4 ttyS4 */
-#endif
-};
-
-#define NR_PORTS	(sizeof(rs_table)/sizeof(struct serial_state))
-
-/* The number of buffer descriptors and their sizes.
- */
-#define RX_NUM_FIFO	4
-#define RX_BUF_SIZE	32
-#define TX_NUM_FIFO	4
-#define TX_BUF_SIZE	32
-
-#define CONSOLE_NUM_FIFO 2
-#define CONSOLE_BUF_SIZE 4
-
-char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE];
-
-/* The async_struct in serial.h does not really give us what we
- * need, so define our own here.
- */
-typedef struct serial_info {
-	int			magic;
-	int			flags;
-
-	struct serial_state	*state;
- 	/* struct serial_struct	*state; */
- 	/* struct async_struct	*state; */
-	
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			line;
-	int			x_char;	/* xon/xoff character */
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	unsigned long		event;
-	unsigned long		last_active;
-	int			blocked_open; /* # of blocked opens */
-	struct work_struct	tqueue;
-	struct work_struct	tqueue_hangup;
- 	wait_queue_head_t	open_wait; 
- 	wait_queue_head_t	close_wait; 
-
-	
-/* CPM Buffer Descriptor pointers.
-	*/
-	QUICC_BD			*rx_bd_base;
-	QUICC_BD			*rx_cur;
-	QUICC_BD			*tx_bd_base;
-	QUICC_BD			*tx_cur;
-} ser_info_t;
-
-
-/* since kmalloc_init() does not get called until much after this initialization: */
-static ser_info_t  quicc_ser_info[NR_PORTS];
-static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE];
-static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE];
-
-static void change_speed(ser_info_t *info);
-static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout);
-
-static inline int serial_paranoia_check(ser_info_t *info,
-					char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
-	static const char *badmagic =
-		"Warning: bad magic number for serial struct (%s) in %s\n";
-	static const char *badinfo =
-		"Warning: null async_struct for (%s) in %s\n";
-
-	if (!info) {
-		printk(badinfo, name, routine);
-		return 1;
-	}
-	if (info->magic != SERIAL_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-#endif
-	return 0;
-}
-
-/*
- * This is used to figure out the divisor speeds and the timeouts,
- * indexed by the termio value.  The generic CPM functions are responsible
- * for setting and assigning baud rate generators for us.
- */
-static int baud_table[] = {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-	9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 };
-
-/* This sucks. There is a better way: */
-#if defined(CONFIG_CONSOLE_9600)
-  #define CONSOLE_BAUDRATE 9600
-#elif defined(CONFIG_CONSOLE_19200)
-  #define CONSOLE_BAUDRATE 19200
-#elif defined(CONFIG_CONSOLE_115200)
-  #define CONSOLE_BAUDRATE 115200
-#else
-  #warning "console baud rate undefined"
-  #define CONSOLE_BAUDRATE 9600
-#endif
-
-/*
- * ------------------------------------------------------------
- * rs_stop() and rs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void rs_360_stop(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int	idx;
-	unsigned long flags;
- 	volatile struct scc_regs *sccp;
- 	volatile struct smc_regs *smcp;
-
-	if (serial_paranoia_check(info, tty->name, "rs_stop"))
-		return;
-	
-	local_irq_save(flags);
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		sccp->scc_sccm &= ~UART_SCCM_TX;
-	} else {
-		/* smcp = &cpmp->cp_smc[idx]; */
-		smcp = &pquicc->smc_regs[idx];
-		smcp->smc_smcm &= ~SMCM_TX;
-	}
-	local_irq_restore(flags);
-}
-
-
-static void rs_360_start(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int	idx;
-	unsigned long flags;
-	volatile struct scc_regs *sccp;
-	volatile struct smc_regs *smcp;
-
-	if (serial_paranoia_check(info, tty->name, "rs_stop"))
-		return;
-	
-	local_irq_save(flags);
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		sccp->scc_sccm |= UART_SCCM_TX;
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-		smcp->smc_smcm |= SMCM_TX;
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * ----------------------------------------------------------------------
- *
- * Here starts the interrupt handling routines.  All of the following
- * subroutines are declared as inline and are folded into
- * rs_interrupt().  They were separated out for readability's sake.
- *
- * Note: rs_interrupt() is a "fast" interrupt, which means that it
- * runs with interrupts turned off.  People who may want to modify
- * rs_interrupt() should try to keep the interrupt handler as fast as
- * possible.  After you are done making modifications, it is not a bad
- * idea to do:
- * 
- * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
- *
- * and look at the resulting assemble code in serial.s.
- *
- * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
- * -----------------------------------------------------------------------
- */
-
-static _INLINE_ void receive_chars(ser_info_t *info)
-{
-	struct tty_struct *tty = info->port.tty;
-	unsigned char ch, flag, *cp;
-	/*int	ignored = 0;*/
-	int	i;
-	ushort	status;
-	 struct	async_icount *icount; 
-	/* struct	async_icount_24 *icount; */
-	volatile QUICC_BD	*bdp;
-
-	icount = &info->state->icount;
-
-	/* Just loop through the closed BDs and copy the characters into
-	 * the buffer.
-	 */
-	bdp = info->rx_cur;
-	for (;;) {
-		if (bdp->status & BD_SC_EMPTY)	/* If this one is empty */
-			break;			/*   we are all done */
-
-		/* The read status mask tell us what we should do with
-		 * incoming characters, especially if errors occur.
-		 * One special case is the use of BD_SC_EMPTY.  If
-		 * this is not set, we are supposed to be ignoring
-		 * inputs.  In this case, just mark the buffer empty and
-		 * continue.
-		 */
-		if (!(info->read_status_mask & BD_SC_EMPTY)) {
-			bdp->status |= BD_SC_EMPTY;
-			bdp->status &=
-				~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
-
-			if (bdp->status & BD_SC_WRAP)
-				bdp = info->rx_bd_base;
-			else
-				bdp++;
-			continue;
-		}
-
-		/* Get the number of characters and the buffer pointer.
-		*/
-		i = bdp->length;
-		/* cp = (unsigned char *)__va(bdp->buf); */
-		cp = (char *)bdp->buf;
-		status = bdp->status;
-
-		while (i-- > 0) {
-			ch = *cp++;
-			icount->rx++;
-
-#ifdef SERIAL_DEBUG_INTR
-			printk("DR%02x:%02x...", ch, status);
-#endif
-			flag = TTY_NORMAL;
-
-			if (status & (BD_SC_BR | BD_SC_FR |
-				       BD_SC_PR | BD_SC_OV)) {
-				/*
-				 * For statistics only
-				 */
-				if (status & BD_SC_BR)
-					icount->brk++;
-				else if (status & BD_SC_PR)
-					icount->parity++;
-				else if (status & BD_SC_FR)
-					icount->frame++;
-				if (status & BD_SC_OV)
-					icount->overrun++;
-
-				/*
-				 * Now check to see if character should be
-				 * ignored, and mask off conditions which
-				 * should be ignored.
-				if (status & info->ignore_status_mask) {
-					if (++ignored > 100)
-						break;
-					continue;
-				}
-				 */
-				status &= info->read_status_mask;
-		
-				if (status & (BD_SC_BR)) {
-#ifdef SERIAL_DEBUG_INTR
-					printk("handling break....");
-#endif
-					*tty->flip.flag_buf_ptr = TTY_BREAK;
-					if (info->flags & ASYNC_SAK)
-						do_SAK(tty);
-				} else if (status & BD_SC_PR)
-					flag = TTY_PARITY;
-				else if (status & BD_SC_FR)
-					flag = TTY_FRAME;
-			}
-			tty_insert_flip_char(tty, ch, flag);
-			if (status & BD_SC_OV)
-				/*
-				 * Overrun is special, since it's
-				 * reported immediately, and doesn't
-				 * affect the current character
-				 */
-				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
-
-		/* This BD is ready to be used again.  Clear status.
-		 * Get next BD.
-		 */
-		bdp->status |= BD_SC_EMPTY;
-		bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
-
-		if (bdp->status & BD_SC_WRAP)
-			bdp = info->rx_bd_base;
-		else
-			bdp++;
-	}
-
-	info->rx_cur = (QUICC_BD *)bdp;
-
-	tty_schedule_flip(tty);
-}
-
-static _INLINE_ void receive_break(ser_info_t *info)
-{
-	struct tty_struct *tty = info->port.tty;
-
-	info->state->icount.brk++;
-	/* Check to see if there is room in the tty buffer for
-	 * the break.  If not, we exit now, losing the break.  FIXME
-	 */
-	tty_insert_flip_char(tty, 0, TTY_BREAK);
-	tty_schedule_flip(tty);
-}
-
-static _INLINE_ void transmit_chars(ser_info_t *info)
-{
-
-	if ((info->flags & TX_WAKEUP) ||
-	    (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
-		schedule_work(&info->tqueue);
-	}
-
-#ifdef SERIAL_DEBUG_INTR
-	printk("THRE...");
-#endif
-}
-
-#ifdef notdef
-	/* I need to do this for the SCCs, so it is left as a reminder.
-	*/
-static _INLINE_ void check_modem_status(struct async_struct *info)
-{
-	int	status;
-	/* struct	async_icount *icount; */
-	struct	async_icount_24 *icount;
-	
-	status = serial_in(info, UART_MSR);
-
-	if (status & UART_MSR_ANY_DELTA) {
-		icount = &info->state->icount;
-		/* update input line counters */
-		if (status & UART_MSR_TERI)
-			icount->rng++;
-		if (status & UART_MSR_DDSR)
-			icount->dsr++;
-		if (status & UART_MSR_DDCD) {
-			icount->dcd++;
-#ifdef CONFIG_HARD_PPS
-			if ((info->flags & ASYNC_HARDPPS_CD) &&
-			    (status & UART_MSR_DCD))
-				hardpps();
-#endif
-		}
-		if (status & UART_MSR_DCTS)
-			icount->cts++;
-		wake_up_interruptible(&info->delta_msr_wait);
-	}
-
-	if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
-#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
-		printk("ttys%d CD now %s...", info->line,
-		       (status & UART_MSR_DCD) ? "on" : "off");
-#endif		
-		if (status & UART_MSR_DCD)
-			wake_up_interruptible(&info->open_wait);
-		else {
-#ifdef SERIAL_DEBUG_OPEN
-			printk("scheduling hangup...");
-#endif
-			queue_task(&info->tqueue_hangup,
-					   &tq_scheduler);
-		}
-	}
-	if (info->flags & ASYNC_CTS_FLOW) {
-		if (info->port.tty->hw_stopped) {
-			if (status & UART_MSR_CTS) {
-#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
-				printk("CTS tx start...");
-#endif
-				info->port.tty->hw_stopped = 0;
-				info->IER |= UART_IER_THRI;
-				serial_out(info, UART_IER, info->IER);
-				rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
-				return;
-			}
-		} else {
-			if (!(status & UART_MSR_CTS)) {
-#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
-				printk("CTS tx stop...");
-#endif
-				info->port.tty->hw_stopped = 1;
-				info->IER &= ~UART_IER_THRI;
-				serial_out(info, UART_IER, info->IER);
-			}
-		}
-	}
-}
-#endif
-
-/*
- * This is the serial driver's interrupt routine for a single port
- */
-/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */
-static void rs_360_interrupt(int vec, void *dev_id)
-{
-	u_char	events;
-	int	idx;
-	ser_info_t *info;
-	volatile struct smc_regs *smcp;
-	volatile struct scc_regs *sccp;
-	
-	info = dev_id;
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		events = sccp->scc_scce;
-		if (events & SCCM_RX)
-			receive_chars(info);
-		if (events & SCCM_TX)
-			transmit_chars(info);
-		sccp->scc_scce = events;
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-		events = smcp->smc_smce;
-		if (events & SMCM_BRKE)
-			receive_break(info);
-		if (events & SMCM_RX)
-			receive_chars(info);
-		if (events & SMCM_TX)
-			transmit_chars(info);
-		smcp->smc_smce = events;
-	}
-	
-#ifdef SERIAL_DEBUG_INTR
-	printk("rs_interrupt_single(%d, %x)...",
-					info->state->smc_scc_num, events);
-#endif
-#ifdef modem_control
-	check_modem_status(info);
-#endif
-	info->last_active = jiffies;
-#ifdef SERIAL_DEBUG_INTR
-	printk("end.\n");
-#endif
-}
-
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-
-static void do_softint(void *private_)
-{
-	ser_info_t	*info = (ser_info_t *) private_;
-	struct tty_struct	*tty;
-	
-	tty = info->port.tty;
-	if (!tty)
-		return;
-
-	if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
-		tty_wakeup(tty);
-}
-
-
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred.  The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (scheduler tqueue) ->
- * 	do_serial_hangup() -> tty->hangup() -> rs_hangup()
- * 
- */
-static void do_serial_hangup(void *private_)
-{
-	struct async_struct	*info = (struct async_struct *) private_;
-	struct tty_struct	*tty;
-	
-	tty = info->port.tty;
-	if (!tty)
-		return;
-
-	tty_hangup(tty);
-}
-
-
-static int startup(ser_info_t *info)
-{
-	unsigned long flags;
-	int	retval=0;
-	int	idx;
-	/*struct serial_state *state = info->state;*/
-	volatile struct smc_regs *smcp;
-	volatile struct scc_regs *sccp;
-	volatile struct smc_uart_pram	*up;
-	volatile struct uart_pram	    *scup;
-
-
-	local_irq_save(flags);
-
-	if (info->flags & ASYNC_INITIALIZED) {
-		goto errout;
-	}
-
-#ifdef maybe
-	if (!state->port || !state->type) {
-		if (info->port.tty)
-			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-		goto errout;
-	}
-#endif
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("starting up ttys%d (irq %d)...", info->line, state->irq);
-#endif
-
-
-#ifdef modem_control
-	info->MCR = 0;
-	if (info->port.tty->termios->c_cflag & CBAUD)
-		info->MCR = UART_MCR_DTR | UART_MCR_RTS;
-#endif
-	
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	change_speed(info);
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		scup = &pquicc->pram[info->state->port].scc.pscc.u;
-
-		scup->mrblr = RX_BUF_SIZE;
-		scup->max_idl = RX_BUF_SIZE;
-
-		sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX);
-		sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-
-		/* Enable interrupts and I/O.
-		*/
-		smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-		smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
-
-		/* We can tune the buffer length and idle characters
-		 * to take advantage of the entire incoming buffer size.
-		 * If mrblr is something other than 1, maxidl has to be
-		 * non-zero or we never get an interrupt.  The maxidl
-		 * is the number of character times we wait after reception
-		 * of the last character before we decide no more characters
-		 * are coming.
-		 */
-		/* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */
-		/* holy unionized structures, Batman: */
-		up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
-
-		up->mrblr = RX_BUF_SIZE;
-		up->max_idl = RX_BUF_SIZE;
-
-		up->brkcr = 1;	/* number of break chars */
-	}
-
-	info->flags |= ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-	return 0;
-	
-errout:
-	local_irq_restore(flags);
-	return retval;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(ser_info_t *info)
-{
-	unsigned long	flags;
-	struct serial_state *state;
-	int		idx;
-	volatile struct smc_regs	*smcp;
-	volatile struct scc_regs	*sccp;
-
-	if (!(info->flags & ASYNC_INITIALIZED))
-		return;
-
-	state = info->state;
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("Shutting down serial port %d (irq %d)....", info->line,
-	       state->irq);
-#endif
-	
-	local_irq_save(flags);
-
-	idx = PORT_NUM(state->smc_scc_num);
-	if (state->smc_scc_num & NUM_IS_SCC) {
-		sccp = &pquicc->scc_regs[idx];
-		sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#ifdef CONFIG_SERIAL_CONSOLE
-		/* We can't disable the transmitter if this is the
-		 * system console.
-		 */
-		if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
-#endif
-		sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
-	} else {
-		smcp = &pquicc->smc_regs[idx];
-
-		/* Disable interrupts and I/O.
-		 */
-		smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
-#ifdef CONFIG_SERIAL_CONSOLE
-		/* We can't disable the transmitter if this is the
-		 * system console.
-		 */
-		if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
-#endif
-			smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	}
-	
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-
-	info->flags &= ~ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-}
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void change_speed(ser_info_t *info)
-{
-	int	baud_rate;
-	unsigned cflag, cval, scval, prev_mode;
-	int	i, bits, sbits, idx;
-	unsigned long	flags;
-	struct serial_state *state;
-	volatile struct smc_regs	*smcp;
-	volatile struct scc_regs	*sccp;
-
-	if (!info->port.tty || !info->port.tty->termios)
-		return;
-	cflag = info->port.tty->termios->c_cflag;
-
-	state = info->state;
-
-	/* Character length programmed into the mode register is the
-	 * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
-	 * 1 or 2 stop bits, minus 1.
-	 * The value 'bits' counts this for us.
-	 */
-	cval = 0;
-	scval = 0;
-
-	/* byte size and parity */
-	switch (cflag & CSIZE) {
-	      case CS5: bits = 5; break;
-	      case CS6: bits = 6; break;
-	      case CS7: bits = 7; break;
-	      case CS8: bits = 8; break;
-	      /* Never happens, but GCC is too dumb to figure it out */
-	      default:  bits = 8; break;
-	}
-	sbits = bits - 5;
-
-	if (cflag & CSTOPB) {
-		cval |= SMCMR_SL;	/* Two stops */
-		scval |= SCU_PMSR_SL;
-		bits++;
-	}
-	if (cflag & PARENB) {
-		cval |= SMCMR_PEN;
-		scval |= SCU_PMSR_PEN;
-		bits++;
-	}
-	if (!(cflag & PARODD)) {
-		cval |= SMCMR_PM_EVEN;
-		scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP);
-	}
-
-	/* Determine divisor based on baud rate */
-	i = cflag & CBAUD;
-	if (i >= (sizeof(baud_table)/sizeof(int)))
-		baud_rate = 9600;
-	else
-		baud_rate = baud_table[i];
-
-	info->timeout = (TX_BUF_SIZE*HZ*bits);
-	info->timeout += HZ/50;		/* Add .02 seconds of slop */
-
-#ifdef modem_control
-	/* CTS flow control flag and modem status interrupts */
-	info->IER &= ~UART_IER_MSI;
-	if (info->flags & ASYNC_HARDPPS_CD)
-		info->IER |= UART_IER_MSI;
-	if (cflag & CRTSCTS) {
-		info->flags |= ASYNC_CTS_FLOW;
-		info->IER |= UART_IER_MSI;
-	} else
-		info->flags &= ~ASYNC_CTS_FLOW;
-	if (cflag & CLOCAL)
-		info->flags &= ~ASYNC_CHECK_CD;
-	else {
-		info->flags |= ASYNC_CHECK_CD;
-		info->IER |= UART_IER_MSI;
-	}
-	serial_out(info, UART_IER, info->IER);
-#endif
-
-	/*
-	 * Set up parity check flag
-	 */
-	info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
-	if (I_INPCK(info->port.tty))
-		info->read_status_mask |= BD_SC_FR | BD_SC_PR;
-	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
-		info->read_status_mask |= BD_SC_BR;
-	
-	/*
-	 * Characters to ignore
-	 */
-	info->ignore_status_mask = 0;
-	if (I_IGNPAR(info->port.tty))
-		info->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
-	if (I_IGNBRK(info->port.tty)) {
-		info->ignore_status_mask |= BD_SC_BR;
-		/*
-		 * If we're ignore parity and break indicators, ignore 
-		 * overruns too.  (For real raw support).
-		 */
-		if (I_IGNPAR(info->port.tty))
-			info->ignore_status_mask |= BD_SC_OV;
-	}
-	/*
-	 * !!! ignore all characters if CREAD is not set
-	 */
-	if ((cflag & CREAD) == 0)
-	 info->read_status_mask &= ~BD_SC_EMPTY;
-	 local_irq_save(flags);
-
-	 /* Start bit has not been added (so don't, because we would just
-	  * subtract it later), and we need to add one for the number of
-	  * stops bits (there is always at least one).
-	  */
-	 bits++;
-	 idx = PORT_NUM(state->smc_scc_num);
-	 if (state->smc_scc_num & NUM_IS_SCC) {
-         sccp = &pquicc->scc_regs[idx];
-         sccp->scc_psmr = (sbits << 12) | scval;
-     } else {
-         smcp = &pquicc->smc_regs[idx];
-
-		/* Set the mode register.  We want to keep a copy of the
-		 * enables, because we want to put them back if they were
-		 * present.
-		 */
-		prev_mode = smcp->smc_smcmr;
-		smcp->smc_smcmr = smcr_mk_clen(bits) | cval |  SMCMR_SM_UART;
-		smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
-	}
-
-	m360_cpm_setbrg((state - rs_table), baud_rate);
-
-	local_irq_restore(flags);
-}
-
-static void rs_360_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	volatile QUICC_BD	*bdp;
-
-	if (serial_paranoia_check(info, tty->name, "rs_put_char"))
-		return 0;
-
-	if (!tty)
-		return 0;
-
-	bdp = info->tx_cur;
-	while (bdp->status & BD_SC_READY);
-
-	/* *((char *)__va(bdp->buf)) = ch; */
-	*((char *)bdp->buf) = ch;
-	bdp->length = 1;
-	bdp->status |= BD_SC_READY;
-
-	/* Get next BD.
-	*/
-	if (bdp->status & BD_SC_WRAP)
-		bdp = info->tx_bd_base;
-	else
-		bdp++;
-
-	info->tx_cur = (QUICC_BD *)bdp;
-	return 1;
-
-}
-
-static int rs_360_write(struct tty_struct * tty,
-		    const unsigned char *buf, int count)
-{
-	int	c, ret = 0;
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	volatile QUICC_BD *bdp;
-
-#ifdef CONFIG_KGDB
-	/* Try to let stub handle output. Returns true if it did. */ 
-	if (kgdb_output_string(buf, count))
-		return ret;
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_write"))
-		return 0;
-
-	if (!tty) 
-		return 0;
-
-	bdp = info->tx_cur;
-
-	while (1) {
-		c = min(count, TX_BUF_SIZE);
-
-		if (c <= 0)
-			break;
-
-		if (bdp->status & BD_SC_READY) {
-			info->flags |= TX_WAKEUP;
-			break;
-		}
-
-		/* memcpy(__va(bdp->buf), buf, c); */
-		memcpy((void *)bdp->buf, buf, c);
-
-		bdp->length = c;
-		bdp->status |= BD_SC_READY;
-
-		buf += c;
-		count -= c;
-		ret += c;
-
-		/* Get next BD.
-		*/
-		if (bdp->status & BD_SC_WRAP)
-			bdp = info->tx_bd_base;
-		else
-			bdp++;
-		info->tx_cur = (QUICC_BD *)bdp;
-	}
-	return ret;
-}
-
-static int rs_360_write_room(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int	ret;
-
-	if (serial_paranoia_check(info, tty->name, "rs_write_room"))
-		return 0;
-
-	if ((info->tx_cur->status & BD_SC_READY) == 0) {
-		info->flags &= ~TX_WAKEUP;
-		ret = TX_BUF_SIZE;
-	}
-	else {
-		info->flags |= TX_WAKEUP;
-		ret = 0;
-	}
-	return ret;
-}
-
-/* I could track this with transmit counters....maybe later.
-*/
-static int rs_360_chars_in_buffer(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-				
-	if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
-		return 0;
-	return 0;
-}
-
-static void rs_360_flush_buffer(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-				
-	if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
-		return;
-
-	/* There is nothing to "flush", whatever we gave the CPM
-	 * is on its way out.
-	 */
-	tty_wakeup(tty);
-	info->flags &= ~TX_WAKEUP;
-}
-
-/*
- * This function is used to send a high-priority XON/XOFF character to
- * the device
- */
-static void rs_360_send_xchar(struct tty_struct *tty, char ch)
-{
-	volatile QUICC_BD	*bdp;
-
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "rs_send_char"))
-		return;
-
-	bdp = info->tx_cur;
-	while (bdp->status & BD_SC_READY);
-
-	/* *((char *)__va(bdp->buf)) = ch; */
-	*((char *)bdp->buf) = ch;
-	bdp->length = 1;
-	bdp->status |= BD_SC_READY;
-
-	/* Get next BD.
-	*/
-	if (bdp->status & BD_SC_WRAP)
-		bdp = info->tx_bd_base;
-	else
-		bdp++;
-
-	info->tx_cur = (QUICC_BD *)bdp;
-}
-
-/*
- * ------------------------------------------------------------
- * rs_throttle()
- * 
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void rs_360_throttle(struct tty_struct * tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-	
-	printk("throttle %s: %d....\n", _tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_throttle"))
-		return;
-	
-	if (I_IXOFF(tty))
-		rs_360_send_xchar(tty, STOP_CHAR(tty));
-
-#ifdef modem_control
-	if (tty->termios->c_cflag & CRTSCTS)
-		info->MCR &= ~UART_MCR_RTS;
-
-	local_irq_disable();
-	serial_out(info, UART_MCR, info->MCR);
-	local_irq_enable();
-#endif
-}
-
-static void rs_360_unthrottle(struct tty_struct * tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-	
-	printk("unthrottle %s: %d....\n", _tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
-		return;
-	
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			rs_360_send_xchar(tty, START_CHAR(tty));
-	}
-#ifdef modem_control
-	if (tty->termios->c_cflag & CRTSCTS)
-		info->MCR |= UART_MCR_RTS;
-	local_irq_disable();
-	serial_out(info, UART_MCR, info->MCR);
-	local_irq_enable();
-#endif
-}
-
-/*
- * ------------------------------------------------------------
- * rs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-#ifdef maybe
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * 	    is emptied.  On bus types like RS485, the transmitter must
- * 	    release the bus after transmitting. This must be done when
- * 	    the transmit shift register is empty, not be done when the
- * 	    transmit holding register is empty.  This functionality
- * 	    allows an RS485 driver to be written in user space. 
- */
-static int get_lsr_info(struct async_struct * info, unsigned int *value)
-{
-	unsigned char status;
-	unsigned int result;
-
-	local_irq_disable();
-	status = serial_in(info, UART_LSR);
-	local_irq_enable();
-	result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
-	return put_user(result,value);
-}
-#endif
-
-static int rs_360_tiocmget(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	unsigned int result = 0;
-#ifdef modem_control
-	unsigned char control, status;
-
-	if (serial_paranoia_check(info, tty->name, __func__))
-		return -ENODEV;
-
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	control = info->MCR;
-	local_irq_disable();
-	status = serial_in(info, UART_MSR);
-	local_irq_enable();
-	result =  ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
-		| ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
-#ifdef TIOCM_OUT1
-		| ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0)
-		| ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0)
-#endif
-		| ((status  & UART_MSR_DCD) ? TIOCM_CAR : 0)
-		| ((status  & UART_MSR_RI) ? TIOCM_RNG : 0)
-		| ((status  & UART_MSR_DSR) ? TIOCM_DSR : 0)
-		| ((status  & UART_MSR_CTS) ? TIOCM_CTS : 0);
-#endif
-	return result;
-}
-
-static int rs_360_tiocmset(struct tty_struct *tty,
-			   unsigned int set, unsigned int clear)
-{
-#ifdef modem_control
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
- 	unsigned int arg;
-
-	if (serial_paranoia_check(info, tty->name, __func__))
-		return -ENODEV;
-
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-	/* FIXME: locking on info->mcr */
- 	if (set & TIOCM_RTS)
- 		info->mcr |= UART_MCR_RTS;
- 	if (set & TIOCM_DTR)
- 		info->mcr |= UART_MCR_DTR;
-	if (clear & TIOCM_RTS)
-		info->MCR &= ~UART_MCR_RTS;
-	if (clear & TIOCM_DTR)
-		info->MCR &= ~UART_MCR_DTR;
-
-#ifdef TIOCM_OUT1
-	if (set & TIOCM_OUT1)
-		info->MCR |= UART_MCR_OUT1;
-	if (set & TIOCM_OUT2)
-		info->MCR |= UART_MCR_OUT2;
-	if (clear & TIOCM_OUT1)
-		info->MCR &= ~UART_MCR_OUT1;
-	if (clear & TIOCM_OUT2)
-		info->MCR &= ~UART_MCR_OUT2;
-#endif
-
-	local_irq_disable();
-	serial_out(info, UART_MCR, info->MCR);
-	local_irq_enable();
-#endif
-	return 0;
-}
-
-/* Sending a break is a two step process on the SMC/SCC.  It is accomplished
- * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT
- * command.  We take advantage of the begin/end functions to make this
- * happen.
- */
-static ushort	smc_chan_map[] = {
-	CPM_CR_CH_SMC1,
-	CPM_CR_CH_SMC2
-};
-
-static ushort	scc_chan_map[] = {
-	CPM_CR_CH_SCC1,
-	CPM_CR_CH_SCC2,
-	CPM_CR_CH_SCC3,
-	CPM_CR_CH_SCC4
-};
-
-static void begin_break(ser_info_t *info)
-{
-	volatile QUICC *cp;
-	ushort	chan;
-	int     idx;
-
-	cp = pquicc;
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC)
-		chan = scc_chan_map[idx];
-	else
-		chan = smc_chan_map[idx];
-
-	cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG;
-	while (cp->cp_cr & CPM_CR_FLG);
-}
-
-static void end_break(ser_info_t *info)
-{
-	volatile QUICC *cp;
-	ushort	chan;
-	int idx;
-
-	cp = pquicc;
-
-	idx = PORT_NUM(info->state->smc_scc_num);
-	if (info->state->smc_scc_num & NUM_IS_SCC)
-		chan = scc_chan_map[idx];
-	else
-		chan = smc_chan_map[idx];
-
-	cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-	while (cp->cp_cr & CPM_CR_FLG);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break(ser_info_t *info, unsigned int duration)
-{
-#ifdef SERIAL_DEBUG_SEND_BREAK
-	printk("rs_send_break(%d) jiff=%lu...", duration, jiffies);
-#endif
-	begin_break(info);
-	msleep_interruptible(duration);
-	end_break(info);
-#ifdef SERIAL_DEBUG_SEND_BREAK
-	printk("done jiffies=%lu\n", jiffies);
-#endif
-}
-
-
-/*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for
- *     RI where only 0->1 is counted.
- */
-static int rs_360_get_icount(struct tty_struct *tty,
-				struct serial_icounter_struct *icount)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	struct async_icount cnow;
-
-	local_irq_disable();
-	cnow = info->state->icount;
-	local_irq_enable();
-
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-
-	return 0;
-}
-
-static int rs_360_ioctl(struct tty_struct *tty,
-		    unsigned int cmd, unsigned long arg)
-{
-	int error;
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	int retval;
-	struct async_icount cnow; 
-	/* struct async_icount_24 cnow;*/ 	/* kernel counter temps */
-	struct serial_icounter_struct *p_cuser;	/* user space */
-
-	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
-		return -ENODEV;
-
-	if (cmd != TIOCMIWAIT) {
-		if (tty->flags & (1 << TTY_IO_ERROR))
-		    return -EIO;
-	}
-	
-	switch (cmd) {
-		case TCSBRK:	/* SVID version: non-zero arg --> no break */
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			if (signal_pending(current))
-				return -EINTR;
-			if (!arg) {
-				send_break(info, 250);	/* 1/4 second */
-				if (signal_pending(current))
-					return -EINTR;
-			}
-			return 0;
-		case TCSBRKP:	/* support for POSIX tcsendbreak() */
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			if (signal_pending(current))
-				return -EINTR;
-			send_break(info, arg ? arg*100 : 250);
-			if (signal_pending(current))
-				return -EINTR;
-			return 0;
-		case TIOCSBRK:
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			begin_break(info);
-			return 0;
-		case TIOCCBRK:
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			end_break(info);
-			return 0;
-#ifdef maybe
-		case TIOCSERGETLSR: /* Get line status register */
-			return get_lsr_info(info, (unsigned int *) arg);
-#endif
-		/*
-		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-		 * - mask passed in arg for lines of interest
- 		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-		 * Caller should use TIOCGICOUNT to see which one it was
-		 */
-		 case TIOCMIWAIT:
-#ifdef modem_control
-			local_irq_disable();
-			/* note the counters on entry */
-			cprev = info->state->icount;
-			local_irq_enable();
-			while (1) {
-				interruptible_sleep_on(&info->delta_msr_wait);
-				/* see if a signal did it */
-				if (signal_pending(current))
-					return -ERESTARTSYS;
-				local_irq_disable();
-				cnow = info->state->icount; /* atomic copy */
-				local_irq_enable();
-				if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && 
-				    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-					return -EIO; /* no change => error */
-				if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-				     ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-				     ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
-				     ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
-					return 0;
-				}
-				cprev = cnow;
-			}
-			/* NOTREACHED */
-#else
-			return 0;
-#endif
-
-
-		default:
-			return -ENOIOCTLCMD;
-		}
-	return 0;
-}
-
-/* FIX UP modem control here someday......
-*/
-static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-
-	change_speed(info);
-
-#ifdef modem_control
-	/* Handle transition to B0 status */
-	if ((old_termios->c_cflag & CBAUD) &&
-	    !(tty->termios->c_cflag & CBAUD)) {
-		info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
-		local_irq_disable();
-		serial_out(info, UART_MCR, info->MCR);
-		local_irq_enable();
-	}
-	
-	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) &&
-	    (tty->termios->c_cflag & CBAUD)) {
-		info->MCR |= UART_MCR_DTR;
-		if (!tty->hw_stopped ||
-		    !(tty->termios->c_cflag & CRTSCTS)) {
-			info->MCR |= UART_MCR_RTS;
-		}
-		local_irq_disable();
-		serial_out(info, UART_MCR, info->MCR);
-		local_irq_enable();
-	}
-	
-	/* Handle turning off CRTSCTS */
-	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
-		rs_360_start(tty);
-	}
-#endif
-
-#if 0
-	/*
-	 * No need to wake up processes in open wait, since they
-	 * sample the CLOCAL flag once, and don't recheck it.
-	 * XXX  It's not clear whether the current behavior is correct
-	 * or not.  Hence, this may change.....
-	 */
-	if (!(old_termios->c_cflag & CLOCAL) &&
-	    (tty->termios->c_cflag & CLOCAL))
-		wake_up_interruptible(&info->open_wait);
-#endif
-}
-
-/*
- * ------------------------------------------------------------
- * rs_close()
- * 
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void rs_360_close(struct tty_struct *tty, struct file * filp)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	/* struct async_state *state; */
-	struct serial_state *state;
-	unsigned long	flags;
-	int		idx;
-	volatile struct smc_regs	*smcp;
-	volatile struct scc_regs	*sccp;
-
-	if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
-		return;
-
-	state = info->state;
-	
-	local_irq_save(flags);
-	
-	if (tty_hung_up_p(filp)) {
-		DBG_CNT("before DEC-hung");
-		local_irq_restore(flags);
-		return;
-	}
-	
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_close ttys%d, count = %d\n", info->line, state->count);
-#endif
-	if ((tty->count == 1) && (state->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  state->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk("rs_close: bad serial port count; tty->count is 1, "
-		       "state->count is %d\n", state->count);
-		state->count = 1;
-	}
-	if (--state->count < 0) {
-		printk("rs_close: bad serial port count for ttys%d: %d\n",
-		       info->line, state->count);
-		state->count = 0;
-	}
-	if (state->count) {
-		DBG_CNT("before DEC-2");
-		local_irq_restore(flags);
-		return;
-	}
-	info->flags |= ASYNC_CLOSING;
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify 
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
-	/*
-	 * At this point we stop accepting input.  To do this, we
-	 * disable the receive line status interrupts, and tell the
-	 * interrupt driver to stop checking the data ready bit in the
-	 * line status register.
-	 */
-	info->read_status_mask &= ~BD_SC_EMPTY;
-	if (info->flags & ASYNC_INITIALIZED) {
-
-		idx = PORT_NUM(info->state->smc_scc_num);
-		if (info->state->smc_scc_num & NUM_IS_SCC) {
-			sccp = &pquicc->scc_regs[idx];
-			sccp->scc_sccm &= ~UART_SCCM_RX;
-			sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR;
-		} else {
-			smcp = &pquicc->smc_regs[idx];
-			smcp->smc_smcm &= ~SMCM_RX;
-			smcp->smc_smcmr &= ~SMCMR_REN;
-		}
-		/*
-		 * Before we drop DTR, make sure the UART transmitter
-		 * has completely drained; this is especially
-		 * important if there is a transmit FIFO!
-		 */
-		rs_360_wait_until_sent(tty, info->timeout);
-	}
-	shutdown(info);
-	rs_360_flush_buffer(tty);
-	tty_ldisc_flush(tty);		
-	tty->closing = 0;
-	info->event = 0;
-	info->port.tty = NULL;
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			msleep_interruptible(jiffies_to_msecs(info->close_delay));
-		}
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&info->close_wait);
-	local_irq_restore(flags);
-}
-
-/*
- * rs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	unsigned long orig_jiffies, char_time;
-	/*int lsr;*/
-	volatile QUICC_BD *bdp;
-	
-	if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
-		return;
-
-#ifdef maybe
-	if (info->state->type == PORT_UNKNOWN)
-		return;
-#endif
-
-	orig_jiffies = jiffies;
-	/*
-	 * Set the check interval to be 1/5 of the estimated time to
-	 * send a single character, and make it at least 1.  The check
-	 * interval should also be less than the timeout.
-	 * 
-	 * Note: we have to use pretty tight timings here to satisfy
-	 * the NIST-PCTS.
-	 */
-	char_time = 1;
-	if (timeout)
-		char_time = min(char_time, (unsigned long)timeout);
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-	printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
-	printk("jiff=%lu...", jiffies);
-#endif
-
-	/* We go through the loop at least once because we can't tell
-	 * exactly when the last character exits the shifter.  There can
-	 * be at least two characters waiting to be sent after the buffers
-	 * are empty.
-	 */
-	do {
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-		printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
-#endif
-/*		current->counter = 0;	 make us low-priority */
-		msleep_interruptible(jiffies_to_msecs(char_time));
-		if (signal_pending(current))
-			break;
-		if (timeout && (time_after(jiffies, orig_jiffies + timeout)))
-			break;
-		/* The 'tx_cur' is really the next buffer to send.  We
-		 * have to back up to the previous BD and wait for it
-		 * to go.  This isn't perfect, because all this indicates
-		 * is the buffer is available.  There are still characters
-		 * in the CPM FIFO.
-		 */
-		bdp = info->tx_cur;
-		if (bdp == info->tx_bd_base)
-			bdp += (TX_NUM_FIFO-1);
-		else
-			bdp--;
-	} while (bdp->status & BD_SC_READY);
-	current->state = TASK_RUNNING;
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-	printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
-#endif
-}
-
-/*
- * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-static void rs_360_hangup(struct tty_struct *tty)
-{
-	ser_info_t *info = (ser_info_t *)tty->driver_data;
-	struct serial_state *state = info->state;
-	
-	if (serial_paranoia_check(info, tty->name, "rs_hangup"))
-		return;
-
-	state = info->state;
-	
-	rs_360_flush_buffer(tty);
-	shutdown(info);
-	info->event = 0;
-	state->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->port.tty = NULL;
-	wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-			   ser_info_t *info)
-{
-#ifdef DO_THIS_LATER
-	DECLARE_WAITQUEUE(wait, current);
-#endif
-	struct serial_state *state = info->state;
-	int		retval;
-	int		do_clocal = 0;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (tty_hung_up_p(filp) ||
-	    (info->flags & ASYNC_CLOSING)) {
-		if (info->flags & ASYNC_CLOSING)
-			interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		if (info->flags & ASYNC_HUP_NOTIFY)
-			return -EAGAIN;
-		else
-			return -ERESTARTSYS;
-#else
-		return -EAGAIN;
-#endif
-	}
-
-	/*
-	 * If non-blocking mode is set, or the port is not enabled,
-	 * then make the check up front and then exit.
-	 * If this is an SMC port, we don't have modem control to wait
-	 * for, so just get out here.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR)) ||
-	    !(info->state->smc_scc_num & NUM_IS_SCC)) {
-		info->flags |= ASYNC_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	if (tty->termios->c_cflag & CLOCAL)
-		do_clocal = 1;
-	
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, state->count is dropped by one, so that
-	 * rs_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-#ifdef DO_THIS_LATER
-	add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready before block: ttys%d, count = %d\n",
-	       state->line, state->count);
-#endif
-	local_irq_disable();
-	if (!tty_hung_up_p(filp)) 
-		state->count--;
-	local_irq_enable();
-	info->blocked_open++;
-	while (1) {
-		local_irq_disable();
-		if (tty->termios->c_cflag & CBAUD)
-			serial_out(info, UART_MCR,
-				   serial_inp(info, UART_MCR) |
-				   (UART_MCR_DTR | UART_MCR_RTS));
-		local_irq_enable();
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (tty_hung_up_p(filp) ||
-		    !(info->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
-			if (info->flags & ASYNC_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;	
-#else
-			retval = -EAGAIN;
-#endif
-			break;
-		}
-		if (!(info->flags & ASYNC_CLOSING) &&
-		    (do_clocal || (serial_in(info, UART_MSR) &
-				   UART_MSR_DCD)))
-			break;
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-#ifdef SERIAL_DEBUG_OPEN
-		printk("block_til_ready blocking: ttys%d, count = %d\n",
-		       info->line, state->count);
-#endif
-		tty_unlock();
-		schedule();
-		tty_lock();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&info->open_wait, &wait);
-	if (!tty_hung_up_p(filp))
-		state->count++;
-	info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready after blocking: ttys%d, count = %d\n",
-	       info->line, state->count);
-#endif
-#endif /* DO_THIS_LATER */
-	if (retval)
-		return retval;
-	info->flags |= ASYNC_NORMAL_ACTIVE;
-	return 0;
-}
-
-static int get_async_struct(int line, ser_info_t **ret_info)
-{
-	struct serial_state *sstate;
-
-	sstate = rs_table + line;
-	if (sstate->info) {
-		sstate->count++;
-		*ret_info = (ser_info_t *)sstate->info;
-		return 0;
-	}
-	else {
-		return -ENOMEM;
-	}
-}
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its async structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int rs_360_open(struct tty_struct *tty, struct file * filp)
-{
-	ser_info_t	*info;
-	int 		retval, line;
-
-	line = tty->index;
-	if ((line < 0) || (line >= NR_PORTS))
-		return -ENODEV;
-	retval = get_async_struct(line, &info);
-	if (retval)
-		return retval;
-	if (serial_paranoia_check(info, tty->name, "rs_open"))
-		return -ENODEV;
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_open %s, count = %d\n", tty->name, info->state->count);
-#endif
-	tty->driver_data = info;
-	info->port.tty = tty;
-
-	/*
-	 * Start up serial port
-	 */
-	retval = startup(info);
-	if (retval)
-		return retval;
-
-	retval = block_til_ready(tty, filp, info);
-	if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
-		printk("rs_open returning after block_til_ready with %d\n",
-		       retval);
-#endif
-		return retval;
-	}
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("rs_open %s successful...", tty->name);
-#endif
-	return 0;
-}
-
-/*
- * /proc fs routines....
- */
-
-static inline int line_info(char *buf, struct serial_state *state)
-{
-#ifdef notdef
-	struct async_struct *info = state->info, scr_info;
-	char	stat_buf[30], control, status;
-#endif
-	int	ret;
-
-	ret = sprintf(buf, "%d: uart:%s port:%X irq:%d",
-		      state->line,
-		      (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC",
-		      (unsigned int)(state->port), state->irq);
-
-	if (!state->port || (state->type == PORT_UNKNOWN)) {
-		ret += sprintf(buf+ret, "\n");
-		return ret;
-	}
-
-#ifdef notdef
-	/*
-	 * Figure out the current RS-232 lines
-	 */
-	if (!info) {
-		info = &scr_info;	/* This is just for serial_{in,out} */
-
-		info->magic = SERIAL_MAGIC;
-		info->port = state->port;
-		info->flags = state->flags;
-		info->quot = 0;
-		info->port.tty = NULL;
-	}
-	local_irq_disable();
-	status = serial_in(info, UART_MSR);
-	control = info ? info->MCR : serial_in(info, UART_MCR);
-	local_irq_enable();
-	
-	stat_buf[0] = 0;
-	stat_buf[1] = 0;
-	if (control & UART_MCR_RTS)
-		strcat(stat_buf, "|RTS");
-	if (status & UART_MSR_CTS)
-		strcat(stat_buf, "|CTS");
-	if (control & UART_MCR_DTR)
-		strcat(stat_buf, "|DTR");
-	if (status & UART_MSR_DSR)
-		strcat(stat_buf, "|DSR");
-	if (status & UART_MSR_DCD)
-		strcat(stat_buf, "|CD");
-	if (status & UART_MSR_RI)
-		strcat(stat_buf, "|RI");
-
-	if (info->quot) {
-		ret += sprintf(buf+ret, " baud:%d",
-			       state->baud_base / info->quot);
-	}
-
-	ret += sprintf(buf+ret, " tx:%d rx:%d",
-		      state->icount.tx, state->icount.rx);
-
-	if (state->icount.frame)
-		ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
-	
-	if (state->icount.parity)
-		ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
-	
-	if (state->icount.brk)
-		ret += sprintf(buf+ret, " brk:%d", state->icount.brk);	
-
-	if (state->icount.overrun)
-		ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
-
-	/*
-	 * Last thing is the RS-232 status lines
-	 */
-	ret += sprintf(buf+ret, " %s\n", stat_buf+1);
-#endif
-	return ret;
-}
-
-int rs_360_read_proc(char *page, char **start, off_t off, int count,
-		 int *eof, void *data)
-{
-	int i, len = 0;
-	off_t	begin = 0;
-
-	len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
-	for (i = 0; i < NR_PORTS && len < 4000; i++) {
-		len += line_info(page + len, &rs_table[i]);
-		if (len+begin > off+count)
-			goto done;
-		if (len+begin < off) {
-			begin += len;
-			len = 0;
-		}
-	}
-	*eof = 1;
-done:
-	if (off >= len+begin)
-		return 0;
-	*start = page + (begin-off);
-	return ((count < begin+len-off) ? count : begin+len-off);
-}
-
-/*
- * ---------------------------------------------------------------------
- * rs_init() and friends
- *
- * rs_init() is called at boot-time to initialize the serial driver.
- * ---------------------------------------------------------------------
- */
-
-/*
- * This routine prints out the appropriate serial driver version
- * number, and identifies which options were configured into this
- * driver.
- */
-static _INLINE_ void show_serial_version(void)
-{
- 	printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
-}
-
-
-/*
- * The serial console driver used during boot.  Note that these names
- * clash with those found in "serial.c", so we currently can't support
- * the 16xxx uarts and these at the same time.  I will fix this to become
- * an indirect function call from tty_io.c (or something).
- */
-
-#ifdef CONFIG_SERIAL_CONSOLE
-
-/*
- * Print a string to the serial port trying not to disturb any possible
- * real use of the port...
- */
-static void my_console_write(int idx, const char *s,
-				unsigned count)
-{
-	struct		serial_state	*ser;
-	ser_info_t		*info;
-	unsigned		i;
-	QUICC_BD		*bdp, *bdbase;
-	volatile struct smc_uart_pram	*up;
-	volatile	u_char		*cp;
-
-	ser = rs_table + idx;
-
-
-	/* If the port has been initialized for general use, we have
-	 * to use the buffer descriptors allocated there.  Otherwise,
-	 * we simply use the single buffer allocated.
-	 */
-	if ((info = (ser_info_t *)ser->info) != NULL) {
-		bdp = info->tx_cur;
-		bdbase = info->tx_bd_base;
-	}
-	else {
-		/* Pointer to UART in parameter ram.
-		*/
-		/* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
-		up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
-
-		/* Get the address of the host memory buffer.
-		 */
-		bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
-	}
-
-	/*
-	 * We need to gracefully shut down the transmitter, disable
-	 * interrupts, then send our bytes out.
-	 */
-
-	/*
-	 * Now, do each character.  This is not as bad as it looks
-	 * since this is a holding FIFO and not a transmitting FIFO.
-	 * We could add the complexity of filling the entire transmit
-	 * buffer, but we would just wait longer between accesses......
-	 */
-	for (i = 0; i < count; i++, s++) {
-		/* Wait for transmitter fifo to empty.
-		 * Ready indicates output is ready, and xmt is doing
-		 * that, not that it is ready for us to send.
-		 */
-		while (bdp->status & BD_SC_READY);
-
-		/* Send the character out.
-		 */
-		cp = bdp->buf;
-		*cp = *s;
-		
-		bdp->length = 1;
-		bdp->status |= BD_SC_READY;
-
-		if (bdp->status & BD_SC_WRAP)
-			bdp = bdbase;
-		else
-			bdp++;
-
-		/* if a LF, also do CR... */
-		if (*s == 10) {
-			while (bdp->status & BD_SC_READY);
-			/* cp = __va(bdp->buf); */
-			cp = bdp->buf;
-			*cp = 13;
-			bdp->length = 1;
-			bdp->status |= BD_SC_READY;
-
-			if (bdp->status & BD_SC_WRAP) {
-				bdp = bdbase;
-			}
-			else {
-				bdp++;
-			}
-		}
-	}
-
-	/*
-	 * Finally, Wait for transmitter & holding register to empty
-	 *  and restore the IER
-	 */
-	while (bdp->status & BD_SC_READY);
-
-	if (info)
-		info->tx_cur = (QUICC_BD *)bdp;
-}
-
-static void serial_console_write(struct console *c, const char *s,
-				unsigned count)
-{
-#ifdef CONFIG_KGDB
-	/* Try to let stub handle output. Returns true if it did. */ 
-	if (kgdb_output_string(s, count))
-		return;
-#endif
-	my_console_write(c->index, s, count);
-}
-
-
-
-/*void console_print_68360(const char *p)
-{
-	const char *cp = p;
-	int i;
-
-	for (i=0;cp[i]!=0;i++);
-
-	serial_console_write (p, i);
-
-	//Comment this if you want to have a strict interrupt-driven output
-	//rs_fair_output();
-
-	return;
-}*/
-
-
-
-
-
-
-#ifdef CONFIG_XMON
-int
-xmon_360_write(const char *s, unsigned count)
-{
-	my_console_write(0, s, count);
-	return(count);
-}
-#endif
-
-#ifdef CONFIG_KGDB
-void
-putDebugChar(char ch)
-{
-	my_console_write(0, &ch, 1);
-}
-#endif
-
-/*
- * Receive character from the serial port.  This only works well
- * before the port is initialized for real use.
- */
-static int my_console_wait_key(int idx, int xmon, char *obuf)
-{
-	struct serial_state		*ser;
-	u_char			c, *cp;
-	ser_info_t		*info;
-	QUICC_BD		*bdp;
-	volatile struct smc_uart_pram	*up;
-	int				i;
-
-	ser = rs_table + idx;
-
-	/* Get the address of the host memory buffer.
-	 * If the port has been initialized for general use, we must
-	 * use information from the port structure.
-	 */
-	if ((info = (ser_info_t *)ser->info))
-		bdp = info->rx_cur;
-	else
-		/* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */
-		bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
-
-	/* Pointer to UART in parameter ram.
-	 */
-	/* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
-	up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
-
-	/*
-	 * We need to gracefully shut down the receiver, disable
-	 * interrupts, then read the input.
-	 * XMON just wants a poll.  If no character, return -1, else
-	 * return the character.
-	 */
-	if (!xmon) {
-		while (bdp->status & BD_SC_EMPTY);
-	}
-	else {
-		if (bdp->status & BD_SC_EMPTY)
-			return -1;
-	}
-
-	cp = (char *)bdp->buf;
-
-	if (obuf) {
-		i = c = bdp->length;
-		while (i-- > 0)
-			*obuf++ = *cp++;
-	}
-	else {
-		c = *cp;
-	}
-	bdp->status |= BD_SC_EMPTY;
-
-	if (info) {
-		if (bdp->status & BD_SC_WRAP) {
-			bdp = info->rx_bd_base;
-		}
-		else {
-			bdp++;
-		}
-		info->rx_cur = (QUICC_BD *)bdp;
-	}
-
-	return((int)c);
-}
-
-static int serial_console_wait_key(struct console *co)
-{
-	return(my_console_wait_key(co->index, 0, NULL));
-}
-
-#ifdef CONFIG_XMON
-int
-xmon_360_read_poll(void)
-{
-	return(my_console_wait_key(0, 1, NULL));
-}
-
-int
-xmon_360_read_char(void)
-{
-	return(my_console_wait_key(0, 0, NULL));
-}
-#endif
-
-#ifdef CONFIG_KGDB
-static char kgdb_buf[RX_BUF_SIZE], *kgdp;
-static int kgdb_chars;
-
-unsigned char
-getDebugChar(void)
-{
-	if (kgdb_chars <= 0) {
-		kgdb_chars = my_console_wait_key(0, 0, kgdb_buf);
-		kgdp = kgdb_buf;
-	}
-	kgdb_chars--;
-
-	return(*kgdp++);
-}
-
-void kgdb_interruptible(int state)
-{
-}
-void kgdb_map_scc(void)
-{
-	struct		serial_state *ser;
-	uint		mem_addr;
-	volatile	QUICC_BD		*bdp;
-	volatile	smc_uart_t	*up;
-
-	cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-
-	/* To avoid data cache CPM DMA coherency problems, allocate a
-	 * buffer in the CPM DPRAM.  This will work until the CPM and
-	 * serial ports are initialized.  At that time a memory buffer
-	 * will be allocated.
-	 * The port is already initialized from the boot procedure, all
-	 * we do here is give it a different buffer and make it a FIFO.
-	 */
-
-	ser = rs_table;
-
-	/* Right now, assume we are using SMCs.
-	*/
-	up = (smc_uart_t *)&cpmp->cp_dparam[ser->port];
-
-	/* Allocate space for an input FIFO, plus a few bytes for output.
-	 * Allocate bytes to maintain word alignment.
-	 */
-	mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]);
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase];
-	bdp->buf = mem_addr;
-
-	bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase];
-	bdp->buf = mem_addr+RX_BUF_SIZE;
-
-	up->smc_mrblr = RX_BUF_SIZE;		/* receive buffer length */
-	up->smc_maxidl = RX_BUF_SIZE;
-}
-#endif
-
-static struct tty_struct *serial_console_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return serial_driver;
-}
-
-
-struct console sercons = {
- 	.name		= "ttyS",
- 	.write		= serial_console_write,
- 	.device		= serial_console_device,
- 	.wait_key	= serial_console_wait_key,
- 	.setup		= serial_console_setup,
- 	.flags		= CON_PRINTBUFFER,
- 	.index		= CONFIG_SERIAL_CONSOLE_PORT, 
-};
-
-
-
-/*
- *	Register console.
- */
-long console_360_init(long kmem_start, long kmem_end)
-{
-	register_console(&sercons);
-	/*register_console (console_print_68360); - 2.0.38 only required a write
-      function pointer. */
-	return kmem_start;
-}
-
-#endif
-
-/* Index in baud rate table of the default console baud rate.
-*/
-static	int	baud_idx;
-
-static const struct tty_operations rs_360_ops = {
-	.owner = THIS_MODULE,
-	.open = rs_360_open,
-	.close = rs_360_close,
-	.write = rs_360_write,
-	.put_char = rs_360_put_char,
-	.write_room = rs_360_write_room,
-	.chars_in_buffer = rs_360_chars_in_buffer,
-	.flush_buffer = rs_360_flush_buffer,
-	.ioctl = rs_360_ioctl,
-	.throttle = rs_360_throttle,
-	.unthrottle = rs_360_unthrottle,
-	/* .send_xchar = rs_360_send_xchar, */
-	.set_termios = rs_360_set_termios,
-	.stop = rs_360_stop,
-	.start = rs_360_start,
-	.hangup = rs_360_hangup,
-	/* .wait_until_sent = rs_360_wait_until_sent, */
-	/* .read_proc = rs_360_read_proc, */
-	.tiocmget = rs_360_tiocmget,
-	.tiocmset = rs_360_tiocmset,
-	.get_icount = rs_360_get_icount,
-};
-
-static int __init rs_360_init(void)
-{
-	struct serial_state * state;
-	ser_info_t	*info;
-	void       *mem_addr;
-	uint 		dp_addr, iobits;
-	int		    i, j, idx;
-	ushort		chan;
-	QUICC_BD	*bdp;
-	volatile	QUICC		*cp;
-	volatile	struct smc_regs	*sp;
-	volatile	struct smc_uart_pram	*up;
-	volatile	struct scc_regs	*scp;
-	volatile	struct uart_pram	*sup;
-	/* volatile	immap_t		*immap; */
-	
-	serial_driver = alloc_tty_driver(NR_PORTS);
-	if (!serial_driver)
-		return -1;
-
-	show_serial_version();
-
-	serial_driver->name = "ttyS";
-	serial_driver->major = TTY_MAJOR;
-	serial_driver->minor_start = 64;
-	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	serial_driver->init_termios = tty_std_termios;
-	serial_driver->init_termios.c_cflag =
-		baud_idx | CS8 | CREAD | HUPCL | CLOCAL;
-	serial_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(serial_driver, &rs_360_ops);
-	
-	if (tty_register_driver(serial_driver))
-		panic("Couldn't register serial driver\n");
-
-	cp = pquicc;	/* Get pointer to Communication Processor */
-	/* immap = (immap_t *)IMAP_ADDR; */	/* and to internal registers */
-
-
-	/* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O.
-	 */
-	/* The "standard" configuration through the 860.
-	*/
-/* 	immap->im_ioport.iop_papar |= 0x00fc; */
-/* 	immap->im_ioport.iop_padir &= ~0x00fc; */
-/* 	immap->im_ioport.iop_paodr &= ~0x00fc; */
-	cp->pio_papar |= 0x00fc;
-	cp->pio_padir &= ~0x00fc;
-	/* cp->pio_paodr &= ~0x00fc; */
-
-
-	/* Since we don't yet do modem control, connect the port C pins
-	 * as general purpose I/O.  This will assert CTS and CD for the
-	 * SCC ports.
-	 */
-	/* FIXME: see 360um p.7-365 and 860um p.34-12 
-	 * I can't make sense of these bits - mleslie*/
-/* 	immap->im_ioport.iop_pcdir |= 0x03c6; */
-/* 	immap->im_ioport.iop_pcpar &= ~0x03c6; */
-
-/* 	cp->pio_pcdir |= 0x03c6; */
-/* 	cp->pio_pcpar &= ~0x03c6; */
-
-
-
-	/* Connect SCC2 and SCC3 to NMSI.  Connect BRG3 to SCC2 and
-	 * BRG4 to SCC3.
-	 */
-	cp->si_sicr &= ~0x00ffff00;
-	cp->si_sicr |=  0x001b1200;
-
-#ifdef CONFIG_PP04
-	/* Frequentis PP04 forced to RS-232 until we know better.
-	 * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4.
-	 */
-	immap->im_ioport.iop_pcdir |= 0x000c;
-	immap->im_ioport.iop_pcpar &= ~0x000c;
-	immap->im_ioport.iop_pcdat &= ~0x000c;
-
-	/* This enables the TX driver.
-	*/
-	cp->cp_pbpar &= ~0x6000;
-	cp->cp_pbdat &= ~0x6000;
-#endif
-
-	for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
-		state->magic = SSTATE_MAGIC;
-		state->line = i;
-		state->type = PORT_UNKNOWN;
-		state->custom_divisor = 0;
-		state->close_delay = 5*HZ/10;
-		state->closing_wait = 30*HZ;
-		state->icount.cts = state->icount.dsr = 
-			state->icount.rng = state->icount.dcd = 0;
-		state->icount.rx = state->icount.tx = 0;
-		state->icount.frame = state->icount.parity = 0;
-		state->icount.overrun = state->icount.brk = 0;
-		printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n",
-		       i, (unsigned int)(state->irq),
-		       (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC");
-
-#ifdef CONFIG_SERIAL_CONSOLE
-		/* If we just printed the message on the console port, and
-		 * we are about to initialize it for general use, we have
-		 * to wait a couple of character times for the CR/NL to
-		 * make it out of the transmit buffer.
-		 */
-		if (i == CONFIG_SERIAL_CONSOLE_PORT)
-			mdelay(8);
-
-
-/* 		idx = PORT_NUM(info->state->smc_scc_num); */
-/* 		if (info->state->smc_scc_num & NUM_IS_SCC) */
-/* 			chan = scc_chan_map[idx]; */
-/* 		else */
-/* 			chan = smc_chan_map[idx]; */
-
-/* 		cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */
-/* 		while (cp->cp_cr & CPM_CR_FLG); */
-
-#endif
-		/* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */
-		info = &quicc_ser_info[i];
-		if (info) {
-			memset (info, 0, sizeof(ser_info_t));
-			info->magic = SERIAL_MAGIC;
-			info->line = i;
-			info->flags = state->flags;
-			INIT_WORK(&info->tqueue, do_softint, info);
-			INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
-			init_waitqueue_head(&info->open_wait);
-			init_waitqueue_head(&info->close_wait);
-			info->state = state;
-			state->info = (struct async_struct *)info;
-
-			/* We need to allocate a transmit and receive buffer
-			 * descriptors from dual port ram, and a character
-			 * buffer area from host mem.
-			 */
-			dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO);
-
-			/* Allocate space for FIFOs in the host memory.
-			 *  (for now this is from a static array of buffers :(
-			 */
-			/* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */
-			/* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */
-			mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE];
-
-			/* Set the physical address of the host memory
-			 * buffers in the buffer descriptors, and the
-			 * virtual address for us to work with.
-			 */
-			bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
-			info->rx_cur = info->rx_bd_base = bdp;
-
-			/* initialize rx buffer descriptors */
-			for (j=0; j<(RX_NUM_FIFO-1); j++) {
-				bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
-				bdp->status = BD_SC_EMPTY | BD_SC_INTRPT;
-				mem_addr += RX_BUF_SIZE;
-				bdp++;
-			}
-			bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
-			bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
-
-
-			idx = PORT_NUM(info->state->smc_scc_num);
-			if (info->state->smc_scc_num & NUM_IS_SCC) {
-
-#if defined (CONFIG_UCQUICC) && 1
-				/* set the transceiver mode to RS232 */
-				sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */
-				sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02);
-				*(uint *)_periph_base = sipex_mode_bits;
-				/* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */
-#endif
-			}
-
-			dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO);
-
-			/* Allocate space for FIFOs in the host memory.
-			*/
-			/* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */
-			/* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */
-			mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE];
-
-			/* Set the physical address of the host memory
-			 * buffers in the buffer descriptors, and the
-			 * virtual address for us to work with.
-			 */
-			/* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
-			bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
-			info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp;
-
-			/* initialize tx buffer descriptors */
-			for (j=0; j<(TX_NUM_FIFO-1); j++) {
-				bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
-				bdp->status = BD_SC_INTRPT;
-				mem_addr += TX_BUF_SIZE;
-				bdp++;
-			}
-			bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
-			bdp->status = (BD_SC_WRAP | BD_SC_INTRPT);
-
-			if (info->state->smc_scc_num & NUM_IS_SCC) {
-				scp = &pquicc->scc_regs[idx];
-				sup = &pquicc->pram[info->state->port].scc.pscc.u;
-				sup->rbase = dp_addr;
-				sup->tbase = dp_addr;
-
-				/* Set up the uart parameters in the
-				 * parameter ram.
-				 */
-				sup->rfcr = SMC_EB;
-				sup->tfcr = SMC_EB;
-
-				/* Set this to 1 for now, so we get single
-				 * character interrupts.  Using idle character
-				 * time requires some additional tuning.
-				 */
-				sup->mrblr = 1;
-				sup->max_idl = 0;
-				sup->brkcr = 1;
-				sup->parec = 0;
-				sup->frmer = 0;
-				sup->nosec = 0;
-				sup->brkec = 0;
-				sup->uaddr1 = 0;
-				sup->uaddr2 = 0;
-				sup->toseq = 0;
-				{
-					int i;
-					for (i=0;i<8;i++)
-						sup->cc[i] = 0x8000;
-				}
-				sup->rccm = 0xc0ff;
-
-				/* Send the CPM an initialize command.
-				*/
-				chan = scc_chan_map[idx];
-
-				/* execute the INIT RX & TX PARAMS command for this channel. */
-				cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-				while (cp->cp_cr & CPM_CR_FLG);
-
-				/* Set UART mode, 8 bit, no parity, one stop.
-				 * Enable receive and transmit.
-				 */
-				scp->scc_gsmr.w.high = 0;
-				scp->scc_gsmr.w.low = 
-					(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
-				/* Disable all interrupts and clear all pending
-				 * events.
-				 */
-				scp->scc_sccm = 0;
-				scp->scc_scce = 0xffff;
-				scp->scc_dsr = 0x7e7e;
-				scp->scc_psmr = 0x3000;
-
-				/* If the port is the console, enable Rx and Tx.
-				*/
-#ifdef CONFIG_SERIAL_CONSOLE
-				if (i == CONFIG_SERIAL_CONSOLE_PORT)
-					scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-			}
-			else {
-				/* Configure SMCs Tx/Rx instead of port B
-				 * parallel I/O.
-				 */
-				up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
-				up->rbase = dp_addr;
-
-				iobits = 0xc0 << (idx * 4);
-				cp->pip_pbpar |= iobits;
-				cp->pip_pbdir &= ~iobits;
-				cp->pip_pbodr &= ~iobits;
-
-
-				/* Connect the baud rate generator to the
-				 * SMC based upon index in rs_table.  Also
-				 * make sure it is connected to NMSI.
-				 */
-				cp->si_simode &= ~(0xffff << (idx * 16));
-				cp->si_simode |= (i << ((idx * 16) + 12));
-
-				up->tbase = dp_addr;
-
-				/* Set up the uart parameters in the
-				 * parameter ram.
-				 */
-				up->rfcr = SMC_EB;
-				up->tfcr = SMC_EB;
-
-				/* Set this to 1 for now, so we get single
-				 * character interrupts.  Using idle character
-				 * time requires some additional tuning.
-				 */
-				up->mrblr = 1;
-				up->max_idl = 0;
-				up->brkcr = 1;
-
-				/* Send the CPM an initialize command.
-				*/
-				chan = smc_chan_map[idx];
-
-				cp->cp_cr = mk_cr_cmd(chan,
-									  CPM_CR_INIT_TRX) | CPM_CR_FLG;
-#ifdef CONFIG_SERIAL_CONSOLE
-				if (i == CONFIG_SERIAL_CONSOLE_PORT)
-					printk("");
-#endif
-				while (cp->cp_cr & CPM_CR_FLG);
-
-				/* Set UART mode, 8 bit, no parity, one stop.
-				 * Enable receive and transmit.
-				 */
-				sp = &cp->smc_regs[idx];
-				sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
-				/* Disable all interrupts and clear all pending
-				 * events.
-				 */
-				sp->smc_smcm = 0;
-				sp->smc_smce = 0xff;
-
-				/* If the port is the console, enable Rx and Tx.
-				*/
-#ifdef CONFIG_SERIAL_CONSOLE
-				if (i == CONFIG_SERIAL_CONSOLE_PORT)
-					sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-#endif
-			}
-
-			/* Install interrupt handler.
-			*/
-			/* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info);  */
-			/*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */
-			request_irq(state->irq, rs_360_interrupt, 0, "ttyS",
-				    (void *)info);
-
-			/* Set up the baud rate generator.
-			*/
-			m360_cpm_setbrg(i, baud_table[baud_idx]);
-
-		}
-	}
-
-	return 0;
-}
-module_init(rs_360_init);
-
-/* This must always be called before the rs_360_init() function, otherwise
- * it blows away the port control information.
- */
-//static int __init serial_console_setup( struct console *co, char *options)
-int serial_console_setup( struct console *co, char *options)
-{
-	struct		serial_state	*ser;
-	uint		mem_addr, dp_addr, bidx, idx, iobits;
-	ushort		chan;
-	QUICC_BD	*bdp;
-	volatile	QUICC			*cp;
-	volatile	struct smc_regs	*sp;
-	volatile	struct scc_regs	*scp;
-	volatile	struct smc_uart_pram	*up;
-	volatile	struct uart_pram		*sup;
-
-/* mleslie TODO:
- * add something to the 68k bootloader to store a desired initial console baud rate */
-
-/* 	bd_t						*bd; */ /* a board info struct used by EPPC-bug */
-/* 	bd = (bd_t *)__res; */
-
- 	for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++)
-	 /* if (bd->bi_baudrate == baud_table[bidx]) */
- 		if (CONSOLE_BAUDRATE == baud_table[bidx])
-			break;
-
-	/* co->cflag = CREAD|CLOCAL|bidx|CS8; */
-	baud_idx = bidx;
-
-	ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT;
-
-	cp = pquicc;	/* Get pointer to Communication Processor */
-
-	idx = PORT_NUM(ser->smc_scc_num);
-	if (ser->smc_scc_num & NUM_IS_SCC) {
-
-		/* TODO: need to set up SCC pin assignment etc. here */
-		
-	}
-	else {
-		iobits = 0xc0 << (idx * 4);
-		cp->pip_pbpar |= iobits;
-		cp->pip_pbdir &= ~iobits;
-		cp->pip_pbodr &= ~iobits;
-
-		/* Connect the baud rate generator to the
-		 * SMC based upon index in rs_table.  Also
-		 * make sure it is connected to NMSI.
-		 */
-		cp->si_simode &= ~(0xffff << (idx * 16));
-		cp->si_simode |= (idx << ((idx * 16) + 12));
-	}
-
-	/* When we get here, the CPM has been reset, so we need
-	 * to configure the port.
-	 * We need to allocate a transmit and receive buffer descriptor
-	 * from dual port ram, and a character buffer area from host mem.
-	 */
-
-	/* Allocate space for two buffer descriptors in the DP ram.
-	*/
-	dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO);
-
-	/* Allocate space for two 2 byte FIFOs in the host memory.
-	 */
-	/* mem_addr = m360_cpm_hostalloc(8); */
-	mem_addr = (uint)console_fifos;
-
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	/* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
-	bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
-	bdp->buf = (char *)mem_addr;
-	(bdp+1)->buf = (char *)(mem_addr+4);
-
-	/* For the receive, set empty and wrap.
-	 * For transmit, set wrap.
-	 */
-	bdp->status = BD_SC_EMPTY | BD_SC_WRAP;
-	(bdp+1)->status = BD_SC_WRAP;
-
-	/* Set up the uart parameters in the parameter ram.
-	 */
-	if (ser->smc_scc_num & NUM_IS_SCC) {
-		scp = &cp->scc_regs[idx];
-		/* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */
-		sup = &pquicc->pram[ser->port].scc.pscc.u;
-
-		sup->rbase = dp_addr;
-		sup->tbase = dp_addr + sizeof(QUICC_BD);
-
-		/* Set up the uart parameters in the
-		 * parameter ram.
-		 */
-		sup->rfcr = SMC_EB;
-		sup->tfcr = SMC_EB;
-
-		/* Set this to 1 for now, so we get single
-		 * character interrupts.  Using idle character
-		 * time requires some additional tuning.
-		 */
-		sup->mrblr = 1;
-		sup->max_idl = 0;
-		sup->brkcr = 1;
-		sup->parec = 0;
-		sup->frmer = 0;
-		sup->nosec = 0;
-		sup->brkec = 0;
-		sup->uaddr1 = 0;
-		sup->uaddr2 = 0;
-		sup->toseq = 0;
-		{
-			int i;
-			for (i=0;i<8;i++)
-				sup->cc[i] = 0x8000;
-		}
-		sup->rccm = 0xc0ff;
-
-		/* Send the CPM an initialize command.
-		*/
-		chan = scc_chan_map[idx];
-
-		cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-		while (cp->cp_cr & CPM_CR_FLG);
-
-		/* Set UART mode, 8 bit, no parity, one stop.
-		 * Enable receive and transmit.
-		 */
-		scp->scc_gsmr.w.high = 0;
-		scp->scc_gsmr.w.low = 
-			(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
-		/* Disable all interrupts and clear all pending
-		 * events.
-		 */
-		scp->scc_sccm = 0;
-		scp->scc_scce = 0xffff;
-		scp->scc_dsr = 0x7e7e;
-		scp->scc_psmr = 0x3000;
-
-		scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	}
-	else {
-		/* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */
-		up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
-
-		up->rbase = dp_addr;	/* Base of receive buffer desc. */
-		up->tbase = dp_addr+sizeof(QUICC_BD);	/* Base of xmt buffer desc. */
-		up->rfcr = SMC_EB;
-		up->tfcr = SMC_EB;
-
-		/* Set this to 1 for now, so we get single character interrupts.
-		*/
-		up->mrblr = 1;		/* receive buffer length */
-		up->max_idl = 0;		/* wait forever for next char */
-
-		/* Send the CPM an initialize command.
-		*/
-		chan = smc_chan_map[idx];
-		cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-		while (cp->cp_cr & CPM_CR_FLG);
-
-		/* Set UART mode, 8 bit, no parity, one stop.
-		 * Enable receive and transmit.
-		 */
-		sp = &cp->smc_regs[idx];
-		sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-		/* And finally, enable Rx and Tx.
-		*/
-		sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-	}
-
-	/* Set up the baud rate generator.
-	*/
-	/* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */
-	m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE);
-
-	return 0;
-}
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */
diff --git a/drivers/staging/serial/Kconfig b/drivers/staging/serial/Kconfig
deleted file mode 100644
index 9489688397e0..000000000000
--- a/drivers/staging/serial/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-config SERIAL_68360_SMC
-	bool "68360 SMC uart support"
-	depends on M68360
-	help
-	  This driver supports the SMC serial ports of the Motorola 68360 CPU.
-
-config SERIAL_68360_SCC
-	bool "68360 SCC uart support"
-	depends on M68360
-	help
-	  This driver supports the SCC serial ports of the Motorola 68360 CPU.
-
-config SERIAL_68360
-	bool
-	depends on SERIAL_68360_SMC || SERIAL_68360_SCC
-	default y
diff --git a/drivers/staging/serial/Makefile b/drivers/staging/serial/Makefile
deleted file mode 100644
index 37a6a0b35fba..000000000000
--- a/drivers/staging/serial/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_SERIAL_68360) += 68360serial.o
diff --git a/drivers/staging/serial/TODO b/drivers/staging/serial/TODO
deleted file mode 100644
index a19cda81dab4..000000000000
--- a/drivers/staging/serial/TODO
+++ /dev/null
@@ -1,6 +0,0 @@
-These are a few serial drivers that either do not build, or do not work if they
-do build, or if they seem to work, are for obsolete hardware, or are full of
-unfixable races and no one uses them anymore.
-
-If no one steps up to adopt any of these drivers, they will be removed
-in the 3.4 release.
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index ae1d815e2a53..43045db982d4 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -41,13 +41,6 @@ static bool debug;
 #define QUATECH_HSU200B	0xC0B1	/* HSU200B */
 #define QUATECH_HSU200C	0xC0B2	/* HSU200C */
 #define QUATECH_HSU200D	0xC0B3	/* HSU200D */
-#define QUATECH_SSU100_2  0xC120	/* SSU100_2 */
-#define QUATECH_DSU100_2  0xC140	/* DSU100_2 */
-#define QUATECH_DSU400_2  0xC150	/* DSU400_2 */
-#define QUATECH_QSU100_2  0xC160	/* QSU100_2 */
-#define QUATECH_QSU400_2  0xC170	/* QSU400_2 */
-#define QUATECH_ESU400_2  0xC180	/* ESU400_2 */
-#define QUATECH_ESU100_2  0xC1A0	/* ESU100_2 */
 
 #define QT_SET_GET_DEVICE           0xc2
 #define QT_OPEN_CLOSE_CHANNEL       0xca
@@ -125,7 +118,7 @@ static bool debug;
 #define MODEM_CTRL          0x40
 #define RS232_MODE          0x00
 
-static const struct usb_device_id serqt_id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU200)},
 	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100)},
 	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU200)},
@@ -143,17 +136,9 @@ static const struct usb_device_id serqt_id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200B)},
 	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200C)},
 	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200D)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100_2)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100_2)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU400_2)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU100_2)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU400_2)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU400_2)},
-	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100_2)},
 	{}			/* Terminating entry */
 };
-
-MODULE_DEVICE_TABLE(usb, serqt_id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 struct qt_get_device_data {
 	__u8 porta;
@@ -195,13 +180,6 @@ struct quatech_port {
 	char closePending;
 };
 
-static struct usb_driver serqt_usb_driver = {
-	.name = "quatech-usb-serial",
-	.probe = usb_serial_probe,
-	.disconnect = usb_serial_disconnect,
-	.id_table = serqt_id_table,
-};
-
 static int port_paranoia_check(struct usb_serial_port *port,
 			       const char *function)
 {
@@ -304,8 +282,6 @@ static void qt_write_bulk_callback(struct urb *urb)
 
 	quatech_port = urb->context;
 
-	dbg("%s - port %d\n", __func__, quatech_port->port_num);
-
 	tty = tty_port_tty_get(&quatech_port->port->port);
 
 	if (tty)
@@ -351,7 +327,6 @@ static void qt_read_bulk_callback(struct urb *urb)
 	/* index = MINOR(port->tty->device) - serial->minor; */
 	index = tty->index - serial->minor;
 
-	dbg("%s - port %d\n", __func__, port->number);
 	dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
 
 	if (port_paranoia_check(port, __func__) != 0) {
@@ -726,8 +701,6 @@ static int qt_startup(struct usb_serial *serial)
 	int i;
 	int status;
 
-	dbg("enterting %s", __func__);
-
 	/* Now setup per port private data */
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
@@ -855,8 +828,6 @@ static void qt_release(struct usb_serial *serial)
 	struct quatech_port *qt_port;
 	int i;
 
-	dbg("enterting %s", __func__);
-
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
 		if (!port)
@@ -882,8 +853,6 @@ static int qt_open(struct tty_struct *tty,
 	if (port_paranoia_check(port, __func__))
 		return -ENODEV;
 
-	dbg("%s - port %d\n", __func__, port->number);
-
 	serial = port->serial;
 
 	if (serial_paranoia_check(serial, __func__))
@@ -1006,8 +975,6 @@ static int qt_chars_in_buffer(struct tty_struct *tty)
 
 	serial = get_usb_serial(port, __func__);
 
-	dbg("%s - port %d\n", __func__, port->number);
-
 	if (serial->num_bulk_out) {
 		if (port->write_urb->status == -EINPROGRESS)
 			chars = port->write_urb->transfer_buffer_length;
@@ -1054,8 +1021,6 @@ static void qt_close(struct usb_serial_port *port)
 	unsigned int index;
 	status = 0;
 
-	dbg("%s - port %d\n", __func__, port->number);
-
 	tty = tty_port_tty_get(&port->port);
 	index = tty->index - serial->minor;
 
@@ -1109,8 +1074,6 @@ static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (serial == NULL)
 		return -ENODEV;
 
-	dbg("%s - port %d\n", __func__, port->number);
-
 	if (count == 0) {
 		dbg("%s - write request of 0 bytes\n", __func__);
 		return 0;
@@ -1173,8 +1136,6 @@ static int qt_write_room(struct tty_struct *tty)
 
 	mutex_lock(&qt_port->lock);
 
-	dbg("%s - port %d\n", __func__, port->number);
-
 	if (serial->num_bulk_out) {
 		if (port->write_urb->status != -EINPROGRESS)
 			retval = port->bulk_out_size;
@@ -1241,8 +1202,6 @@ static void qt_set_termios(struct tty_struct *tty,
 	int baud, divisor, remainder;
 	int status;
 
-	dbg("%s", __func__);
-
 	index = tty->index - port->serial->minor;
 
 	switch (cflag) {
@@ -1365,8 +1324,6 @@ static void qt_break(struct tty_struct *tty, int break_state)
 
 	mutex_lock(&qt_port->lock);
 
-	dbg("%s - port %d\n", __func__, port->number);
-
 	result =
 	    usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			    QT_BREAK_CONTROL, 0x40, onoff, index, NULL, 0, 300);
@@ -1385,8 +1342,6 @@ static inline int qt_real_tiocmget(struct tty_struct *tty,
 	int status;
 	unsigned int index;
 
-	dbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
-
 	index = tty->index - serial->minor;
 	status =
 	    BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr);
@@ -1426,8 +1381,6 @@ static inline int qt_real_tiocmset(struct tty_struct *tty,
 	int status;
 	unsigned int index;
 
-	dbg("%s - port %d\n", __func__, port->number);
-
 	index = tty->index - serial->minor;
 	status =
 	    BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr);
@@ -1461,18 +1414,11 @@ static int qt_tiocmget(struct tty_struct *tty)
 	struct quatech_port *qt_port = qt_get_port_private(port);
 	int retval = -ENODEV;
 
-	dbg("In %s\n", __func__);
-
 	if (!serial)
 		return -ENODEV;
 
 	mutex_lock(&qt_port->lock);
-
-	dbg("%s - port %d\n", __func__, port->number);
-	dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
-
 	retval = qt_real_tiocmget(tty, port, serial);
-
 	mutex_unlock(&qt_port->lock);
 	return retval;
 }
@@ -1486,18 +1432,11 @@ static int qt_tiocmset(struct tty_struct *tty,
 	struct quatech_port *qt_port = qt_get_port_private(port);
 	int retval = -ENODEV;
 
-	dbg("In %s\n", __func__);
-
 	if (!serial)
 		return -ENODEV;
 
 	mutex_lock(&qt_port->lock);
-
-	dbg("%s - port %d\n", __func__, port->number);
-	dbg("%s - qt_port->RxHolding = %d\n", __func__, qt_port->RxHolding);
-
 	retval = qt_real_tiocmset(tty, port, serial, set);
-
 	mutex_unlock(&qt_port->lock);
 	return retval;
 }
@@ -1508,8 +1447,6 @@ static void qt_throttle(struct tty_struct *tty)
 	struct usb_serial *serial = get_usb_serial(port, __func__);
 	struct quatech_port *qt_port;
 
-	dbg("%s - port %d\n", __func__, port->number);
-
 	if (!serial)
 		return;
 
@@ -1519,7 +1456,6 @@ static void qt_throttle(struct tty_struct *tty)
 
 	/* pass on to the driver specific version of this function */
 	qt_port->RxHolding = 1;
-	dbg("%s - port->RxHolding = 1\n", __func__);
 
 	mutex_unlock(&qt_port->lock);
 	return;
@@ -1539,8 +1475,6 @@ static void qt_unthrottle(struct tty_struct *tty)
 
 	mutex_lock(&qt_port->lock);
 
-	dbg("%s - port %d\n", __func__, port->number);
-
 	if (qt_port->RxHolding == 1) {
 		dbg("%s -qt_port->RxHolding == 1\n", __func__);
 
@@ -1559,8 +1493,9 @@ static void qt_unthrottle(struct tty_struct *tty)
 					  qt_read_bulk_callback, port);
 			result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 			if (result)
-				err("%s - failed restarting read urb, error %d",
-				    __func__, result);
+				dev_err(&port->dev,
+					"%s - failed restarting read urb, error %d\n",
+					__func__, result);
 		}
 	}
 	mutex_unlock(&qt_port->lock);
@@ -1589,7 +1524,7 @@ static struct usb_serial_driver quatech_device = {
 		   .name = "serqt",
 		   },
 	.description = DRIVER_DESC,
-	.id_table = serqt_id_table,
+	.id_table = id_table,
 	.num_ports = 8,
 	.open = qt_open,
 	.close = qt_close,
@@ -1612,7 +1547,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&quatech_device, NULL
 };
 
-module_usb_serial_driver(serqt_usb_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c
index 83c582ed12e5..746c4cd5d30e 100644
--- a/drivers/staging/sm7xx/smtcfb.c
+++ b/drivers/staging/sm7xx/smtcfb.c
@@ -2,31 +2,19 @@
  * Silicon Motion SM7XX frame buffer device
  *
  * Copyright (C) 2006 Silicon Motion Technology Corp.
- * Authors: Ge Wang, gewang@siliconmotion.com
- *	    Boyod boyod.yang@siliconmotion.com.cn
+ * Authors:  Ge Wang, gewang@siliconmotion.com
+ *	     Boyod boyod.yang@siliconmotion.com.cn
  *
  * Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ * Author:   Wu Zhangjin, wuzhangjin@gmail.com
  *
  * Copyright (C) 2011 Igalia, S.L.
- * Author: Javier M. Mellid <jmunhoz@igalia.com>
+ * Author:   Javier M. Mellid <jmunhoz@igalia.com>
  *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
  *
- * Version 0.10.26192.21.01
- *	- Add PowerPC/Big endian support
- *	- Verified on 2.6.19.2
- *	Boyod.yang <boyod.yang@siliconmotion.com.cn>
- *
- * Version 0.09.2621.00.01
- *	- Only support Linux Kernel's version 2.6.21
- *	Boyod.yang <boyod.yang@siliconmotion.com.cn>
- *
- * Version 0.09
- *	- Only support Linux Kernel's version 2.6.12
- *	Boyod.yang <boyod.yang@siliconmotion.com.cn>
  */
 
 #include <linux/io.h>
@@ -45,40 +33,19 @@
 
 #include "smtcfb.h"
 
-#ifdef DEBUG
-#define smdbg(format, arg...) printk(KERN_DEBUG format , ## arg)
-#else
-#define smdbg(format, arg...)
-#endif
-
 struct screen_info smtc_screen_info;
 
 /*
 * Private structure
 */
 struct smtcfb_info {
-	/*
-	 * The following is a pointer to be passed into the
-	 * functions below.  The modules outside the main
-	 * voyager.c driver have no knowledge as to what
-	 * is within this structure.
-	 */
 	struct fb_info fb;
-	struct display_switch *dispsw;
-	struct pci_dev *dev;
-	signed int currcon;
-
+	struct pci_dev *pdev;
 	struct {
 		u8 red, green, blue;
 	} palette[NR_RGB];
-
 	u_int palette_size;
-};
 
-struct par_info {
-	/*
-	 * Hardware
-	 */
 	u16 chipID;
 	unsigned char __iomem *m_pMMIO;
 	char __iomem *m_pLFB;
@@ -121,15 +88,6 @@ char __iomem *smtc_RegBaseAddress;	/* Memory Map IO starting address */
 char __iomem *smtc_VRAMBaseAddress;	/* video memory starting address */
 
 static u32 colreg[17];
-static struct par_info hw;	/* hardware information */
-
-u16 smtc_ChipIDs[] = {
-	0x710,
-	0x712,
-	0x720
-};
-
-#define numSMTCchipIDs ARRAY_SIZE(smtc_ChipIDs)
 
 static struct fb_var_screeninfo smtcfb_var = {
 	.xres           = 1024,
@@ -154,30 +112,29 @@ static struct fb_fix_screeninfo smtcfb_fix = {
 	.accel          = FB_ACCEL_SMI_LYNX,
 };
 
-static void sm712_set_timing(struct smtcfb_info *sfb,
-			     struct par_info *ppar_info)
+static void sm712_set_timing(struct smtcfb_info *sfb)
 {
 	int i = 0, j = 0;
 	u32 m_nScreenStride;
 
-	smdbg("\nppar_info->width = %d ppar_info->height = %d"
-			"sfb->fb.var.bits_per_pixel = %d ppar_info->hz = %d\n",
-			ppar_info->width, ppar_info->height,
-			sfb->fb.var.bits_per_pixel, ppar_info->hz);
+	dev_dbg(&sfb->pdev->dev,
+		"sfb->width=%d sfb->height=%d "
+		"sfb->fb.var.bits_per_pixel=%d sfb->hz=%d\n",
+		sfb->width, sfb->height, sfb->fb.var.bits_per_pixel, sfb->hz);
 
 	for (j = 0; j < numVGAModes; j++) {
-		if (VGAMode[j].mmSizeX == ppar_info->width &&
-		    VGAMode[j].mmSizeY == ppar_info->height &&
+		if (VGAMode[j].mmSizeX == sfb->width &&
+		    VGAMode[j].mmSizeY == sfb->height &&
 		    VGAMode[j].bpp == sfb->fb.var.bits_per_pixel &&
-		    VGAMode[j].hz == ppar_info->hz) {
+		    VGAMode[j].hz == sfb->hz) {
 
-			smdbg("\nVGAMode[j].mmSizeX  = %d VGAMode[j].mmSizeY ="
-					"%d VGAMode[j].bpp = %d"
-					"VGAMode[j].hz=%d\n",
-					VGAMode[j].mmSizeX, VGAMode[j].mmSizeY,
-					VGAMode[j].bpp, VGAMode[j].hz);
+			dev_dbg(&sfb->pdev->dev,
+				"VGAMode[j].mmSizeX=%d VGAMode[j].mmSizeY=%d "
+				"VGAMode[j].bpp=%d VGAMode[j].hz=%d\n",
+				VGAMode[j].mmSizeX, VGAMode[j].mmSizeY,
+				VGAMode[j].bpp, VGAMode[j].hz);
 
-			smdbg("VGAMode index=%d\n", j);
+			dev_dbg(&sfb->pdev->dev, "VGAMode index=%d\n", j);
 
 			smtc_mmiowb(0x0, 0x3c6);
 
@@ -238,37 +195,37 @@ static void sm712_set_timing(struct smtcfb_info *sfb,
 	smtc_mmiowb(0x67, 0x3c2);
 
 	/* set VPR registers */
-	writel(0x0, ppar_info->m_pVPR + 0x0C);
-	writel(0x0, ppar_info->m_pVPR + 0x40);
+	writel(0x0, sfb->m_pVPR + 0x0C);
+	writel(0x0, sfb->m_pVPR + 0x40);
 
 	/* set data width */
 	m_nScreenStride =
-		(ppar_info->width * sfb->fb.var.bits_per_pixel) / 64;
+		(sfb->width * sfb->fb.var.bits_per_pixel) / 64;
 	switch (sfb->fb.var.bits_per_pixel) {
 	case 8:
-		writel(0x0, ppar_info->m_pVPR + 0x0);
+		writel(0x0, sfb->m_pVPR + 0x0);
 		break;
 	case 16:
-		writel(0x00020000, ppar_info->m_pVPR + 0x0);
+		writel(0x00020000, sfb->m_pVPR + 0x0);
 		break;
 	case 24:
-		writel(0x00040000, ppar_info->m_pVPR + 0x0);
+		writel(0x00040000, sfb->m_pVPR + 0x0);
 		break;
 	case 32:
-		writel(0x00030000, ppar_info->m_pVPR + 0x0);
+		writel(0x00030000, sfb->m_pVPR + 0x0);
 		break;
 	}
 	writel((u32) (((m_nScreenStride + 2) << 16) | m_nScreenStride),
-	       ppar_info->m_pVPR + 0x10);
+	       sfb->m_pVPR + 0x10);
 
 }
 
 static void sm712_setpalette(int regno, unsigned red, unsigned green,
 			     unsigned blue, struct fb_info *info)
 {
-	struct par_info *cur_par = (struct par_info *)info->par;
+	struct smtcfb_info *sfb = info->par;
 
-	if (cur_par->BaseAddressInVRAM)
+	if (sfb->BaseAddressInVRAM)
 		/*
 		 * second display palette for dual head. Enable CRT RAM, 6-bit
 		 * RAM
@@ -283,14 +240,13 @@ static void sm712_setpalette(int regno, unsigned red, unsigned green,
 	smtc_mmiowb(blue >> 10, dac_val);
 }
 
-static void smtc_set_timing(struct smtcfb_info *sfb, struct par_info
-		*ppar_info)
+static void smtc_set_timing(struct smtcfb_info *sfb)
 {
-	switch (ppar_info->chipID) {
+	switch (sfb->chipID) {
 	case 0x710:
 	case 0x712:
 	case 0x720:
-		sm712_set_timing(sfb, ppar_info);
+		sm712_set_timing(sfb);
 		break;
 	}
 }
@@ -310,7 +266,7 @@ static inline unsigned int chan_to_field(unsigned int chan,
 	return chan << bf->offset;
 }
 
-static int cfb_blank(int blank_mode, struct fb_info *info)
+static int smtc_blank(int blank_mode, struct fb_info *info)
 {
 	/* clear DPMS setting */
 	switch (blank_mode) {
@@ -660,10 +616,10 @@ void smtcfb_setmode(struct smtcfb_info *sfb)
 		break;
 	}
 
-	hw.width = sfb->fb.var.xres;
-	hw.height = sfb->fb.var.yres;
-	hw.hz = 60;
-	smtc_set_timing(sfb, &hw);
+	sfb->width = sfb->fb.var.xres;
+	sfb->height = sfb->fb.var.yres;
+	sfb->hz = 60;
+	smtc_set_timing(sfb);
 }
 
 static int smtc_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
@@ -697,7 +653,7 @@ static struct fb_ops smtcfb_ops = {
 	.fb_check_var = smtc_check_var,
 	.fb_set_par   = smtc_set_par,
 	.fb_setcolreg = smtc_setcolreg,
-	.fb_blank     = cfb_blank,
+	.fb_blank     = smtc_blank,
 	.fb_fillrect  = cfb_fillrect,
 	.fb_imageblit = cfb_imageblit,
 	.fb_copyarea  = cfb_copyarea,
@@ -710,8 +666,7 @@ static struct fb_ops smtcfb_ops = {
 /*
  * Alloc struct smtcfb_info and assign the default value
  */
-static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev,
-							char *name)
+static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *pdev, char *name)
 {
 	struct smtcfb_info *sfb;
 
@@ -720,8 +675,7 @@ static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev,
 	if (!sfb)
 		return NULL;
 
-	sfb->currcon = -1;
-	sfb->dev = dev;
+	sfb->pdev = pdev;
 
 	/*** Init sfb->fb with default value ***/
 	sfb->fb.flags = FBINFO_FLAG_DEFAULT;
@@ -745,7 +699,9 @@ static struct smtcfb_info *smtc_alloc_fb_info(struct pci_dev *dev,
 	/* text mode acceleration */
 	sfb->fb.var.accel_flags = FB_ACCELF_TEXT;
 	sfb->fb.var.vmode = FB_VMODE_NONINTERLACED;
-	sfb->fb.par = &hw;
+
+	sfb->fb.par = sfb;
+
 	sfb->fb.pseudo_palette = colreg;
 
 	return sfb;
@@ -766,17 +722,17 @@ static void smtc_unmap_mmio(struct smtcfb_info *sfb)
  */
 
 static int smtc_map_smem(struct smtcfb_info *sfb,
-		struct pci_dev *dev, u_long smem_len)
+		struct pci_dev *pdev, u_long smem_len)
 {
 	if (sfb->fb.var.bits_per_pixel == 32) {
 #ifdef __BIG_ENDIAN
-		sfb->fb.fix.smem_start = pci_resource_start(dev, 0)
+		sfb->fb.fix.smem_start = pci_resource_start(pdev, 0)
 			+ 0x800000;
 #else
-		sfb->fb.fix.smem_start = pci_resource_start(dev, 0);
+		sfb->fb.fix.smem_start = pci_resource_start(pdev, 0);
 #endif
 	} else {
-		sfb->fb.fix.smem_start = pci_resource_start(dev, 0);
+		sfb->fb.fix.smem_start = pci_resource_start(pdev, 0);
 	}
 
 	sfb->fb.fix.smem_len = smem_len;
@@ -784,8 +740,8 @@ static int smtc_map_smem(struct smtcfb_info *sfb,
 	sfb->fb.screen_base = smtc_VRAMBaseAddress;
 
 	if (!sfb->fb.screen_base) {
-		printk(KERN_ERR "%s: unable to map screen memory\n",
-				sfb->fb.fix.id);
+		dev_err(&pdev->dev,
+			"%s: unable to map screen memory\n", sfb->fb.fix.id);
 		return -ENOMEM;
 	}
 
@@ -831,16 +787,14 @@ static int __init sm712vga_setup(char *options)
 {
 	int index;
 
-	if (!options || !*options) {
-		smdbg("\n No vga parameter\n");
+	if (!options || !*options)
 		return -EINVAL;
-	}
 
 	smtc_screen_info.lfb_width = 0;
 	smtc_screen_info.lfb_height = 0;
 	smtc_screen_info.lfb_depth = 0;
 
-	smdbg("\nsm712vga_setup = %s\n", options);
+	pr_debug("sm712vga_setup = %s\n", options);
 
 	for (index = 0;
 	     index < ARRAY_SIZE(vesa_mode);
@@ -858,10 +812,6 @@ static int __init sm712vga_setup(char *options)
 }
 __setup("vga=", sm712vga_setup);
 
-/* Jason (08/13/2009)
- * Original init function changed to probe method to be used by pci_drv
- * process used to detect chips replaced with kernel process in pci_drv
- */
 static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *ent)
 {
@@ -871,23 +821,20 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 	int err;
 	unsigned long pFramebufferPhysical;
 
-	printk(KERN_INFO
-		"Silicon Motion display driver " SMTC_LINUX_FB_VERSION "\n");
+	dev_info(&pdev->dev, "Silicon Motion display driver.");
 
 	err = pci_enable_device(pdev);	/* enable SMTC chip */
 	if (err)
 		return err;
 
-	hw.chipID = ent->device;
-	sprintf(name, "sm%Xfb", hw.chipID);
-
 	sfb = smtc_alloc_fb_info(pdev, name);
 
 	if (!sfb)
 		goto failed_free;
-	/* Jason (08/13/2009)
-	 * Store fb_info to be further used when suspending and resuming
-	 */
+
+	sfb->chipID = ent->device;
+	sprintf(name, "sm%Xfb", sfb->chipID);
+
 	pci_set_drvdata(pdev, sfb);
 
 	sm7xx_init_hw();
@@ -910,37 +857,37 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 #endif
 	/* Map address and memory detection */
 	pFramebufferPhysical = pci_resource_start(pdev, 0);
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw.chipRevID);
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &sfb->chipRevID);
 
-	switch (hw.chipID) {
+	switch (sfb->chipID) {
 	case 0x710:
 	case 0x712:
 		sfb->fb.fix.mmio_start = pFramebufferPhysical + 0x00400000;
 		sfb->fb.fix.mmio_len = 0x00400000;
 		smem_size = SM712_VIDEOMEMORYSIZE;
 #ifdef __BIG_ENDIAN
-		hw.m_pLFB = (smtc_VRAMBaseAddress =
+		sfb->m_pLFB = (smtc_VRAMBaseAddress =
 		    ioremap(pFramebufferPhysical, 0x00c00000));
 #else
-		hw.m_pLFB = (smtc_VRAMBaseAddress =
+		sfb->m_pLFB = (smtc_VRAMBaseAddress =
 		    ioremap(pFramebufferPhysical, 0x00800000));
 #endif
-		hw.m_pMMIO = (smtc_RegBaseAddress =
+		sfb->m_pMMIO = (smtc_RegBaseAddress =
 		    smtc_VRAMBaseAddress + 0x00700000);
-		hw.m_pDPR = smtc_VRAMBaseAddress + 0x00408000;
-		hw.m_pVPR = hw.m_pLFB + 0x0040c000;
+		sfb->m_pDPR = smtc_VRAMBaseAddress + 0x00408000;
+		sfb->m_pVPR = sfb->m_pLFB + 0x0040c000;
 #ifdef __BIG_ENDIAN
 		if (sfb->fb.var.bits_per_pixel == 32) {
 			smtc_VRAMBaseAddress += 0x800000;
-			hw.m_pLFB += 0x800000;
-			printk(KERN_INFO
-				"\nsmtc_VRAMBaseAddress=%p hw.m_pLFB=%p\n",
-					smtc_VRAMBaseAddress, hw.m_pLFB);
+			sfb->m_pLFB += 0x800000;
+			dev_info(&pdev->dev,
+				 "smtc_VRAMBaseAddress=%p sfb->m_pLFB=%p",
+				  smtc_VRAMBaseAddress, sfb->m_pLFB);
 		}
 #endif
 		if (!smtc_RegBaseAddress) {
-			printk(KERN_ERR
-				"%s: unable to map memory mapped IO\n",
+			dev_err(&pdev->dev,
+				"%s: unable to map memory mapped IO!",
 				sfb->fb.fix.id);
 			err = -ENOMEM;
 			goto failed_fb;
@@ -962,20 +909,20 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 		sfb->fb.fix.mmio_start = pFramebufferPhysical;
 		sfb->fb.fix.mmio_len = 0x00200000;
 		smem_size = SM722_VIDEOMEMORYSIZE;
-		hw.m_pDPR = ioremap(pFramebufferPhysical, 0x00a00000);
-		hw.m_pLFB = (smtc_VRAMBaseAddress =
-		    hw.m_pDPR + 0x00200000);
-		hw.m_pMMIO = (smtc_RegBaseAddress =
-		    hw.m_pDPR + 0x000c0000);
-		hw.m_pVPR = hw.m_pDPR + 0x800;
+		sfb->m_pDPR = ioremap(pFramebufferPhysical, 0x00a00000);
+		sfb->m_pLFB = (smtc_VRAMBaseAddress =
+		    sfb->m_pDPR + 0x00200000);
+		sfb->m_pMMIO = (smtc_RegBaseAddress =
+		    sfb->m_pDPR + 0x000c0000);
+		sfb->m_pVPR = sfb->m_pDPR + 0x800;
 
 		smtc_seqw(0x62, 0xff);
 		smtc_seqw(0x6a, 0x0d);
 		smtc_seqw(0x6b, 0x02);
 		break;
 	default:
-		printk(KERN_ERR
-		"No valid Silicon Motion display chip was detected!\n");
+		dev_err(&pdev->dev,
+			"No valid Silicon Motion display chip was detected!");
 
 		goto failed_fb;
 	}
@@ -992,22 +939,21 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 
 	smtcfb_setmode(sfb);
 	/* Primary display starting from 0 position */
-	hw.BaseAddressInVRAM = 0;
-	sfb->fb.par = &hw;
+	sfb->BaseAddressInVRAM = 0;
 
 	err = register_framebuffer(&sfb->fb);
 	if (err < 0)
 		goto failed;
 
-	printk(KERN_INFO "Silicon Motion SM%X Rev%X primary display mode"
-			"%dx%d-%d Init Complete.\n", hw.chipID, hw.chipRevID,
-			sfb->fb.var.xres, sfb->fb.var.yres,
-			sfb->fb.var.bits_per_pixel);
+	dev_info(&pdev->dev,
+		 "Silicon Motion SM%X Rev%X primary display mode %dx%d-%d Init Complete.",
+		 sfb->chipID, sfb->chipRevID, sfb->fb.var.xres,
+		 sfb->fb.var.yres, sfb->fb.var.bits_per_pixel);
 
 	return 0;
 
 failed:
-	printk(KERN_ERR "Silicon Motion, Inc.  primary display init fail\n");
+	dev_err(&pdev->dev, "Silicon Motion, Inc. primary display init fail.");
 
 	smtc_unmap_smem(sfb);
 	smtc_unmap_mmio(sfb);
@@ -1021,7 +967,6 @@ failed_free:
 }
 
 
-/* Jason (08/11/2009) PCI_DRV wrapper essential structs */
 static DEFINE_PCI_DEVICE_TABLE(smtcfb_pci_table) = {
 	{ PCI_DEVICE(0x126f, 0x710), },
 	{ PCI_DEVICE(0x126f, 0x712), },
@@ -1030,9 +975,6 @@ static DEFINE_PCI_DEVICE_TABLE(smtcfb_pci_table) = {
 };
 
 
-/* Jason (08/14/2009)
- * do some clean up when the driver module is removed
- */
 static void __devexit smtcfb_pci_remove(struct pci_dev *pdev)
 {
 	struct smtcfb_info *sfb;
@@ -1078,7 +1020,7 @@ static int smtcfb_pci_resume(struct device *device)
 
 	/* reinit hardware */
 	sm7xx_init_hw();
-	switch (hw.chipID) {
+	switch (sfb->chipID) {
 	case 0x710:
 	case 0x712:
 		/* set MCLK = 14.31818 *  (0x16 / 0x2) */
diff --git a/drivers/staging/sm7xx/smtcfb.h b/drivers/staging/sm7xx/smtcfb.h
index ab95af2b9c07..43d86f873410 100644
--- a/drivers/staging/sm7xx/smtcfb.h
+++ b/drivers/staging/sm7xx/smtcfb.h
@@ -13,19 +13,11 @@
  *  more details.
  */
 
-#define SMTC_LINUX_FB_VERSION	"version 0.11.2619.21.01 July 27, 2008"
-
 #define NR_PALETTE        256
 #define NR_RGB            2
 
 #define FB_ACCEL_SMI_LYNX 88
 
-#ifdef __BIG_ENDIAN
-#define PC_VGA            0
-#else
-#define PC_VGA            1
-#endif
-
 #define SCREEN_X_RES      1024
 #define SCREEN_Y_RES      600
 #define SCREEN_BPP        16
diff --git a/drivers/staging/telephony/ixj.c b/drivers/staging/telephony/ixj.c
index f96027921f60..fd7757ad7fa3 100644
--- a/drivers/staging/telephony/ixj.c
+++ b/drivers/staging/telephony/ixj.c
@@ -19,20 +19,20 @@
  *                  David W. Erhart, <derhart@quicknet.net>
  *                  John Sellers, <jsellers@quicknet.net>
  *                  Mike Preston, <mpreston@quicknet.net>
- *    
+ *
  * Fixes:           David Huggins-Daines, <dhd@cepstral.com>
  *                  Fabio Ferrari, <fabio.ferrari@digitro.com.br>
  *                  Artis Kugevics, <artis@mt.lv>
  *                  Daniele Bellucci, <bellucda@tiscali.it>
  *
- * More information about the hardware related to this driver can be found  
+ * More information about the hardware related to this driver can be found
  * at our website:    http://www.quicknet.net
  *
  * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
  * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
  * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
  * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *    
+ *
  * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
  * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
  * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
@@ -317,7 +317,7 @@ static IXJ *ixj[IXJMAX];
 /*
  *	Allocate a free IXJ device
  */
- 
+
 static IXJ *ixj_alloc()
 {
 	for(cnt=0; cnt<IXJMAX; cnt++)
@@ -366,7 +366,7 @@ static IXJ ixj[IXJMAX];
 /*
  *	Allocate a free IXJ device
  */
- 
+
 static IXJ *ixj_alloc(void)
 {
 	int cnt;
@@ -1084,7 +1084,7 @@ static void ixj_pstn_state(IXJ *j)
 							printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board,
 						j->cadence_f[4].on3, j->cadence_f[4].on3min, j->cadence_f[4].on3dot, j->cadence_f[4].on3max);
 							break;
-						case 6:	
+						case 6:
 							printk(KERN_INFO "IXJ /dev/phone%d Next Ring Cadence state at %u min %ld - %ld - max %ld\n", j->board,
 						j->cadence_f[4].off3, j->cadence_f[4].off3min, j->cadence_f[4].off3dot, j->cadence_f[4].off3max);
 							break;
@@ -1109,7 +1109,7 @@ static void ixj_pstn_state(IXJ *j)
 				}
 				j->pstn_ring_stop = j->pstn_ring_int = 0;
 				daa_set_mode(j, SOP_PU_SLEEP);
-			} 
+			}
 			outb_p(j->pld_scrw.byte, j->XILINXbase);
 			if (j->pstn_cid_intr && time_after(jiffies, j->pstn_cid_received + hertz)) {
 				ixj_daa_cid_read(j);
@@ -1133,7 +1133,7 @@ static void ixj_pstn_state(IXJ *j)
 							printk("IXJ DAA possible wink /dev/phone%d %ld\n", j->board, jiffies);
 						}
 						j->pstn_winkstart = jiffies;
-					} 
+					}
 				} else {
 					if (j->pstn_winkstart) {
 						if(ixjdebug & 0x0008) {
@@ -1524,7 +1524,7 @@ static inline void LED_SetState(int state, IXJ *j)
 /*********************************************************************
 *  GPIO Pins are configured as follows on the Quicknet Internet
 *  PhoneJACK Telephony Cards
-* 
+*
 * POTS Select        GPIO_6=0 GPIO_7=0
 * Mic/Speaker Select GPIO_6=0 GPIO_7=1
 * Handset Select     GPIO_6=1 GPIO_7=0
@@ -1932,7 +1932,7 @@ static int ixj_hookstate(IXJ *j)
 			if(fOffHook != j->p_hook) {
 				if(!j->checkwait) {
 					j->checkwait = jiffies;
-				} 
+				}
 				if(time_before(jiffies, j->checkwait + 2)) {
 					fOffHook ^= 1;
 				} else {
@@ -2342,8 +2342,8 @@ static int ixj_release(struct inode *inode, struct file *file_p)
 		j->ixj_signals[cnt] = SIGIO;
 
 	/* Set the excetion signal enable flags */
-	j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring = 
-	j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 = 
+	j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring =
+	j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 =
 	j->ex_sig.bits.f3 = j->ex_sig.bits.fc0 = j->ex_sig.bits.fc1 = j->ex_sig.bits.fc2 = j->ex_sig.bits.fc3 = 1;
 
 	file_p->private_data = NULL;
@@ -2506,7 +2506,7 @@ static int read_filters(IXJ *j)
 					j->cadence_f[cnt].on1, j->cadence_f[cnt].on1min, j->cadence_f[cnt].on1dot, j->cadence_f[cnt].on1max);
 						break;
 					case 2:
-						printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off1min, 
+						printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off1min,
 															j->cadence_f[cnt].off1max);
 						break;
 					case 3:
@@ -2521,12 +2521,12 @@ static int read_filters(IXJ *j)
 						printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].on3min,
 															j->cadence_f[cnt].on3max);
 						break;
-					case 6:	
+					case 6:
 						printk(KERN_INFO "IXJ /dev/phone%d Next Tone Cadence state at %ld - %ld\n", j->board, j->cadence_f[cnt].off3min,
 															j->cadence_f[cnt].off3max);
 						break;
 				}
-			} 
+			}
 		}
 		if (j->cadence_f[cnt].state == 7) {
 			j->cadence_f[cnt].state = 0;
@@ -2656,37 +2656,37 @@ static void ulaw2alaw(unsigned char *buff, unsigned long len)
 {
 	static unsigned char table_ulaw2alaw[] =
 	{
-		0x2A, 0x2B, 0x28, 0x29, 0x2E, 0x2F, 0x2C, 0x2D, 
-		0x22, 0x23, 0x20, 0x21, 0x26, 0x27, 0x24, 0x25, 
-		0x3A, 0x3B, 0x38, 0x39, 0x3E, 0x3F, 0x3C, 0x3D, 
-		0x32, 0x33, 0x30, 0x31, 0x36, 0x37, 0x34, 0x35, 
-		0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, 0x02, 
-		0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, 0x1A, 
-		0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, 0x12, 
-		0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, 0x6B, 
-		0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, 0x62, 0x63, 
-		0x60, 0x61, 0x66, 0x67, 0x64, 0x65, 0x7B, 0x79, 
-		0x7E, 0x7F, 0x7C, 0x7D, 0x72, 0x73, 0x70, 0x71, 
-		0x76, 0x77, 0x74, 0x75, 0x4B, 0x49, 0x4F, 0x4D, 
-		0x42, 0x43, 0x40, 0x41, 0x46, 0x47, 0x44, 0x45, 
-		0x5A, 0x5B, 0x58, 0x59, 0x5E, 0x5F, 0x5C, 0x5D, 
-		0x52, 0x52, 0x53, 0x53, 0x50, 0x50, 0x51, 0x51, 
-		0x56, 0x56, 0x57, 0x57, 0x54, 0x54, 0x55, 0xD5, 
-		0xAA, 0xAB, 0xA8, 0xA9, 0xAE, 0xAF, 0xAC, 0xAD, 
-		0xA2, 0xA3, 0xA0, 0xA1, 0xA6, 0xA7, 0xA4, 0xA5, 
-		0xBA, 0xBB, 0xB8, 0xB9, 0xBE, 0xBF, 0xBC, 0xBD, 
-		0xB2, 0xB3, 0xB0, 0xB1, 0xB6, 0xB7, 0xB4, 0xB5, 
-		0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, 0x82, 
-		0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, 0x9A, 
-		0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, 0x92, 
-		0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, 0xEB, 
-		0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, 0xE2, 0xE3, 
-		0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, 0xFB, 0xF9, 
-		0xFE, 0xFF, 0xFC, 0xFD, 0xF2, 0xF3, 0xF0, 0xF1, 
-		0xF6, 0xF7, 0xF4, 0xF5, 0xCB, 0xC9, 0xCF, 0xCD, 
-		0xC2, 0xC3, 0xC0, 0xC1, 0xC6, 0xC7, 0xC4, 0xC5, 
-		0xDA, 0xDB, 0xD8, 0xD9, 0xDE, 0xDF, 0xDC, 0xDD, 
-		0xD2, 0xD2, 0xD3, 0xD3, 0xD0, 0xD0, 0xD1, 0xD1, 
+		0x2A, 0x2B, 0x28, 0x29, 0x2E, 0x2F, 0x2C, 0x2D,
+		0x22, 0x23, 0x20, 0x21, 0x26, 0x27, 0x24, 0x25,
+		0x3A, 0x3B, 0x38, 0x39, 0x3E, 0x3F, 0x3C, 0x3D,
+		0x32, 0x33, 0x30, 0x31, 0x36, 0x37, 0x34, 0x35,
+		0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, 0x02,
+		0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, 0x1A,
+		0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, 0x12,
+		0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, 0x6B,
+		0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, 0x62, 0x63,
+		0x60, 0x61, 0x66, 0x67, 0x64, 0x65, 0x7B, 0x79,
+		0x7E, 0x7F, 0x7C, 0x7D, 0x72, 0x73, 0x70, 0x71,
+		0x76, 0x77, 0x74, 0x75, 0x4B, 0x49, 0x4F, 0x4D,
+		0x42, 0x43, 0x40, 0x41, 0x46, 0x47, 0x44, 0x45,
+		0x5A, 0x5B, 0x58, 0x59, 0x5E, 0x5F, 0x5C, 0x5D,
+		0x52, 0x52, 0x53, 0x53, 0x50, 0x50, 0x51, 0x51,
+		0x56, 0x56, 0x57, 0x57, 0x54, 0x54, 0x55, 0xD5,
+		0xAA, 0xAB, 0xA8, 0xA9, 0xAE, 0xAF, 0xAC, 0xAD,
+		0xA2, 0xA3, 0xA0, 0xA1, 0xA6, 0xA7, 0xA4, 0xA5,
+		0xBA, 0xBB, 0xB8, 0xB9, 0xBE, 0xBF, 0xBC, 0xBD,
+		0xB2, 0xB3, 0xB0, 0xB1, 0xB6, 0xB7, 0xB4, 0xB5,
+		0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, 0x82,
+		0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, 0x9A,
+		0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, 0x92,
+		0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, 0xEB,
+		0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, 0xE2, 0xE3,
+		0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, 0xFB, 0xF9,
+		0xFE, 0xFF, 0xFC, 0xFD, 0xF2, 0xF3, 0xF0, 0xF1,
+		0xF6, 0xF7, 0xF4, 0xF5, 0xCB, 0xC9, 0xCF, 0xCD,
+		0xC2, 0xC3, 0xC0, 0xC1, 0xC6, 0xC7, 0xC4, 0xC5,
+		0xDA, 0xDB, 0xD8, 0xD9, 0xDE, 0xDF, 0xDC, 0xDD,
+		0xD2, 0xD2, 0xD3, 0xD3, 0xD0, 0xD0, 0xD1, 0xD1,
 		0xD6, 0xD6, 0xD7, 0xD7, 0xD4, 0xD4, 0xD5, 0xD5
 	};
 
@@ -2701,37 +2701,37 @@ static void alaw2ulaw(unsigned char *buff, unsigned long len)
 {
 	static unsigned char table_alaw2ulaw[] =
 	{
-		0x29, 0x2A, 0x27, 0x28, 0x2D, 0x2E, 0x2B, 0x2C, 
-		0x21, 0x22, 0x1F, 0x20, 0x25, 0x26, 0x23, 0x24, 
-		0x39, 0x3A, 0x37, 0x38, 0x3D, 0x3E, 0x3B, 0x3C, 
-		0x31, 0x32, 0x2F, 0x30, 0x35, 0x36, 0x33, 0x34, 
-		0x0A, 0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D, 
-		0x02, 0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05, 
-		0x1A, 0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D, 
-		0x12, 0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15, 
-		0x62, 0x63, 0x60, 0x61, 0x66, 0x67, 0x64, 0x65, 
-		0x5D, 0x5D, 0x5C, 0x5C, 0x5F, 0x5F, 0x5E, 0x5E, 
-		0x74, 0x76, 0x70, 0x72, 0x7C, 0x7E, 0x78, 0x7A, 
-		0x6A, 0x6B, 0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D, 
-		0x48, 0x49, 0x46, 0x47, 0x4C, 0x4D, 0x4A, 0x4B, 
-		0x40, 0x41, 0x3F, 0x3F, 0x44, 0x45, 0x42, 0x43, 
-		0x56, 0x57, 0x54, 0x55, 0x5A, 0x5B, 0x58, 0x59, 
-		0x4F, 0x4F, 0x4E, 0x4E, 0x52, 0x53, 0x50, 0x51, 
-		0xA9, 0xAA, 0xA7, 0xA8, 0xAD, 0xAE, 0xAB, 0xAC, 
-		0xA1, 0xA2, 0x9F, 0xA0, 0xA5, 0xA6, 0xA3, 0xA4, 
-		0xB9, 0xBA, 0xB7, 0xB8, 0xBD, 0xBE, 0xBB, 0xBC, 
-		0xB1, 0xB2, 0xAF, 0xB0, 0xB5, 0xB6, 0xB3, 0xB4, 
-		0x8A, 0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D, 
-		0x82, 0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85, 
-		0x9A, 0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D, 
-		0x92, 0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95, 
-		0xE2, 0xE3, 0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5, 
-		0xDD, 0xDD, 0xDC, 0xDC, 0xDF, 0xDF, 0xDE, 0xDE, 
-		0xF4, 0xF6, 0xF0, 0xF2, 0xFC, 0xFE, 0xF8, 0xFA, 
-		0xEA, 0xEB, 0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED, 
-		0xC8, 0xC9, 0xC6, 0xC7, 0xCC, 0xCD, 0xCA, 0xCB, 
-		0xC0, 0xC1, 0xBF, 0xBF, 0xC4, 0xC5, 0xC2, 0xC3, 
-		0xD6, 0xD7, 0xD4, 0xD5, 0xDA, 0xDB, 0xD8, 0xD9, 
+		0x29, 0x2A, 0x27, 0x28, 0x2D, 0x2E, 0x2B, 0x2C,
+		0x21, 0x22, 0x1F, 0x20, 0x25, 0x26, 0x23, 0x24,
+		0x39, 0x3A, 0x37, 0x38, 0x3D, 0x3E, 0x3B, 0x3C,
+		0x31, 0x32, 0x2F, 0x30, 0x35, 0x36, 0x33, 0x34,
+		0x0A, 0x0B, 0x08, 0x09, 0x0E, 0x0F, 0x0C, 0x0D,
+		0x02, 0x03, 0x00, 0x01, 0x06, 0x07, 0x04, 0x05,
+		0x1A, 0x1B, 0x18, 0x19, 0x1E, 0x1F, 0x1C, 0x1D,
+		0x12, 0x13, 0x10, 0x11, 0x16, 0x17, 0x14, 0x15,
+		0x62, 0x63, 0x60, 0x61, 0x66, 0x67, 0x64, 0x65,
+		0x5D, 0x5D, 0x5C, 0x5C, 0x5F, 0x5F, 0x5E, 0x5E,
+		0x74, 0x76, 0x70, 0x72, 0x7C, 0x7E, 0x78, 0x7A,
+		0x6A, 0x6B, 0x68, 0x69, 0x6E, 0x6F, 0x6C, 0x6D,
+		0x48, 0x49, 0x46, 0x47, 0x4C, 0x4D, 0x4A, 0x4B,
+		0x40, 0x41, 0x3F, 0x3F, 0x44, 0x45, 0x42, 0x43,
+		0x56, 0x57, 0x54, 0x55, 0x5A, 0x5B, 0x58, 0x59,
+		0x4F, 0x4F, 0x4E, 0x4E, 0x52, 0x53, 0x50, 0x51,
+		0xA9, 0xAA, 0xA7, 0xA8, 0xAD, 0xAE, 0xAB, 0xAC,
+		0xA1, 0xA2, 0x9F, 0xA0, 0xA5, 0xA6, 0xA3, 0xA4,
+		0xB9, 0xBA, 0xB7, 0xB8, 0xBD, 0xBE, 0xBB, 0xBC,
+		0xB1, 0xB2, 0xAF, 0xB0, 0xB5, 0xB6, 0xB3, 0xB4,
+		0x8A, 0x8B, 0x88, 0x89, 0x8E, 0x8F, 0x8C, 0x8D,
+		0x82, 0x83, 0x80, 0x81, 0x86, 0x87, 0x84, 0x85,
+		0x9A, 0x9B, 0x98, 0x99, 0x9E, 0x9F, 0x9C, 0x9D,
+		0x92, 0x93, 0x90, 0x91, 0x96, 0x97, 0x94, 0x95,
+		0xE2, 0xE3, 0xE0, 0xE1, 0xE6, 0xE7, 0xE4, 0xE5,
+		0xDD, 0xDD, 0xDC, 0xDC, 0xDF, 0xDF, 0xDE, 0xDE,
+		0xF4, 0xF6, 0xF0, 0xF2, 0xFC, 0xFE, 0xF8, 0xFA,
+		0xEA, 0xEB, 0xE8, 0xE9, 0xEE, 0xEF, 0xEC, 0xED,
+		0xC8, 0xC9, 0xC6, 0xC7, 0xCC, 0xCD, 0xCA, 0xCB,
+		0xC0, 0xC1, 0xBF, 0xBF, 0xC4, 0xC5, 0xC2, 0xC3,
+		0xD6, 0xD7, 0xD4, 0xD5, 0xDA, 0xDB, 0xD8, 0xD9,
 		0xCF, 0xCF, 0xCE, 0xCE, 0xD2, 0xD3, 0xD0, 0xD1
 	};
 
@@ -3090,7 +3090,7 @@ static int ixj_write_cid_string(IXJ *j, char *s, int checksum)
 
 static void ixj_pad_fsk(IXJ *j, int pad)
 {
-	int cnt; 
+	int cnt;
 
 	for (cnt = 0; cnt < pad; cnt++) {
 		if(j->fskdcnt < (j->fsksize - 1))
@@ -3474,7 +3474,7 @@ static void ixj_write_frame(IXJ *j)
 			ixj_post_cid(j);
 		}
 		/* This may seem rude, but if we just played one frame of FSK data for CallerID
-		   and there is real audio data in the buffer, we need to throw it away because 
+		   and there is real audio data in the buffer, we need to throw it away because
 		   we just used it's time slot */
 		if (j->write_buffer_rp > j->write_buffer_wp) {
 			j->write_buffer_rp += j->cid_play_frame_size * 2;
@@ -3486,7 +3486,7 @@ static void ixj_write_frame(IXJ *j)
 
 			wake_up_interruptible(&j->poll_q);	/* Wake any blocked selects */
 		}
-	} else if (j->write_buffer && j->write_buffers_empty < 1) { 
+	} else if (j->write_buffer && j->write_buffers_empty < 1) {
 		if (j->write_buffer_wp > j->write_buffer_rp) {
 			frame_count =
 			    (j->write_buffer_wp - j->write_buffer_rp) / (j->play_frame_size * 2);
@@ -4150,7 +4150,7 @@ static void ixj_aec_start(IXJ *j, int level)
 
 			ixj_WriteDSPCommand(0xCF97, j);	/* Set AGC Enable */
 			ixj_WriteDSPCommand(0x0000, j);	/* to off */
-			
+
 			break;
 
 		case AEC_MED:
@@ -4161,7 +4161,7 @@ static void ixj_aec_start(IXJ *j, int level)
 
 			ixj_WriteDSPCommand(0xCF97, j);	/* Set AGC Enable */
 			ixj_WriteDSPCommand(0x0000, j);	/* to off */
-			
+
 			break;
 
 		case AEC_HIGH:
@@ -4172,7 +4172,7 @@ static void ixj_aec_start(IXJ *j, int level)
 
 			ixj_WriteDSPCommand(0xCF97, j);	/* Set AGC Enable */
 			ixj_WriteDSPCommand(0x0000, j);	/* to off */
-			
+
 			break;
 
 		case AEC_AGC:
@@ -4197,28 +4197,28 @@ static void ixj_aec_start(IXJ *j, int level)
 			/* Now we can set the AGC initial parameters and turn it on */
 			ixj_WriteDSPCommand(0xCF90, j);	/* Set AGC Minimum gain */
 			ixj_WriteDSPCommand(0x0020, j);	/* to 0.125 (-18dB) */
-	
+
 			ixj_WriteDSPCommand(0xCF91, j);	/* Set AGC Maximum gain */
 			ixj_WriteDSPCommand(0x1000, j);	/* to 16 (24dB) */
-			
+
 			ixj_WriteDSPCommand(0xCF92, j);	/* Set AGC start gain */
 			ixj_WriteDSPCommand(0x0800, j);	/* to 8 (+18dB) */
-		
+
 			ixj_WriteDSPCommand(0xCF93, j);	/* Set AGC hold time */
 			ixj_WriteDSPCommand(0x1F40, j);	/* to 2 seconds (units are 250us) */
-			
+
 			ixj_WriteDSPCommand(0xCF94, j);	/* Set AGC Attack Time Constant */
 			ixj_WriteDSPCommand(0x0005, j);	/* to 8ms */
-			
+
 			ixj_WriteDSPCommand(0xCF95, j);	/* Set AGC Decay Time Constant */
 			ixj_WriteDSPCommand(0x000D, j);	/* to 4096ms */
-			
+
 			ixj_WriteDSPCommand(0xCF96, j);	/* Set AGC Attack Threshold */
 			ixj_WriteDSPCommand(0x1200, j);	/* to 25% */
-			
+
 			ixj_WriteDSPCommand(0xCF97, j);	/* Set AGC Enable */
 			ixj_WriteDSPCommand(0x0001, j);	/* to on */
-			
+
 			break;
 
 		case AEC_AUTO:
@@ -4495,7 +4495,7 @@ static int ixj_play_start(IXJ *j)
 		return -ENOMEM;
 	}
 /*	j->write_buffers_empty = 2; */
-	j->write_buffers_empty = 1; 
+	j->write_buffers_empty = 1;
 	j->write_buffer_size = j->play_frame_size * 2;
 	j->write_buffer_end = j->write_buffer + j->play_frame_size * 2;
 	j->write_buffer_rp = j->write_buffer_wp = j->write_buffer;
@@ -6465,9 +6465,9 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
 		ixj_ringback(j);
 		break;
 	case PHONE_WINK:
-		if(j->cardtype == QTI_PHONEJACK) 
+		if(j->cardtype == QTI_PHONEJACK)
 			retval = -1;
-		else 
+		else
 			retval = ixj_wink(j);
 		break;
 	case PHONE_CPT_STOP:
@@ -6553,7 +6553,7 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
 		ixj_write_vmwi(j, arg);
 		break;
 	case IXJCTL_CID:
-		if (copy_to_user(argp, &j->cid, sizeof(PHONE_CID))) 
+		if (copy_to_user(argp, &j->cid, sizeof(PHONE_CID)))
 			retval = -EFAULT;
 		j->ex.bits.caller_id = 0;
 		break;
@@ -6575,13 +6575,13 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
 		break;
 	case PHONE_CAPABILITIES_LIST:
 		add_caps(j);
-		if (copy_to_user(argp, j->caplist, sizeof(struct phone_capability) * j->caps)) 
+		if (copy_to_user(argp, j->caplist, sizeof(struct phone_capability) * j->caps))
 			retval = -EFAULT;
 		break;
 	case PHONE_CAPABILITIES_CHECK:
 		{
 			struct phone_capability cap;
-			if (copy_from_user(&cap, argp, sizeof(cap))) 
+			if (copy_from_user(&cap, argp, sizeof(cap)))
 				retval = -EFAULT;
 			else {
 				add_caps(j);
@@ -6597,13 +6597,13 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
 		j->ex.bits.pstn_ring = 0;
 		break;
 	case IXJCTL_SET_FILTER:
-		if (copy_from_user(&jf, argp, sizeof(jf))) 
+		if (copy_from_user(&jf, argp, sizeof(jf)))
 			retval = -EFAULT;
 		else
 			retval = ixj_init_filter(j, &jf);
 		break;
 	case IXJCTL_SET_FILTER_RAW:
-		if (copy_from_user(&jfr, argp, sizeof(jfr))) 
+		if (copy_from_user(&jfr, argp, sizeof(jfr)))
 			retval = -EFAULT;
 		else
 			retval = ixj_init_filter_raw(j, &jfr);
@@ -6638,9 +6638,9 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
 				raise *= 2;
 			}
 			if(j->sigdef.signal)
-				j->ex_sig.bytes |= raise; 
+				j->ex_sig.bytes |= raise;
 			else
-				j->ex_sig.bytes &= (raise^0xffff); 
+				j->ex_sig.bytes &= (raise^0xffff);
 		}
 		break;
 	case IXJCTL_INTERCOM_STOP:
@@ -7040,9 +7040,9 @@ static int ixj_selfprobe(IXJ *j)
 
 	/* initialise the DTMF prescale to a sensible value */
 	if (j->cardtype == QTI_LINEJACK) {
-		set_dtmf_prescale(j, 0x10); 
+		set_dtmf_prescale(j, 0x10);
 	} else {
-		set_dtmf_prescale(j, 0x40); 
+		set_dtmf_prescale(j, 0x40);
 	}
 	set_play_volume(j, 0x100);
 	set_rec_volume(j, 0x100);
@@ -7095,15 +7095,15 @@ static int ixj_selfprobe(IXJ *j)
 		j->ixj_signals[cnt] = SIGIO;
 
 	/* Set the excetion signal enable flags */
-	j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring = 
-	j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 = 
+	j->ex_sig.bits.dtmf_ready = j->ex_sig.bits.hookstate = j->ex_sig.bits.flash = j->ex_sig.bits.pstn_ring =
+	j->ex_sig.bits.caller_id = j->ex_sig.bits.pstn_wink = j->ex_sig.bits.f0 = j->ex_sig.bits.f1 = j->ex_sig.bits.f2 =
 	j->ex_sig.bits.f3 = j->ex_sig.bits.fc0 = j->ex_sig.bits.fc1 = j->ex_sig.bits.fc2 = j->ex_sig.bits.fc3 = 1;
 #ifdef IXJ_DYN_ALLOC
 	j->fskdata = NULL;
 #endif
 	j->fskdcnt = 0;
 	j->cidcw_wait = 0;
- 
+
 	/* Register with the Telephony for Linux subsystem */
 	j->p.f_op = &ixj_fops;
 	j->p.open = ixj_open;
@@ -7118,7 +7118,7 @@ static int ixj_selfprobe(IXJ *j)
 /*
  *	Exported service for pcmcia card handling
  */
- 
+
 IXJ *ixj_pcmcia_probe(unsigned long dsp, unsigned long xilinx)
 {
 	IXJ *j = ixj_alloc();
@@ -7320,7 +7320,7 @@ static int ixj_get_status_proc(char *buf)
 			len += sprintf(buf + len, "\nRec volume 0x%x", get_rec_volume(j));
 			len += sprintf(buf + len, "\nPlay volume 0x%x", get_play_volume(j));
 			len += sprintf(buf + len, "\nDTMF prescale 0x%x", get_dtmf_prescale(j));
-			
+
 			len += sprintf(buf + len, "\nHook state %d", j->hookstate); /* j->r_hook);	*/
 
 			if (j->cardtype == QTI_LINEJACK) {
@@ -7417,7 +7417,7 @@ static int ixj_get_status_proc(char *buf)
                         len += sprintf(buf + len, "\nPControl Wait Fails %ld", j->pcontrolwaitfail);
                         len += sprintf(buf + len, "\nIs Control Ready Checks %ld", j->iscontrolready);
                         len += sprintf(buf + len, "\nIs Control Ready Check failures %ld", j->iscontrolreadyfail);
- 
+
 #endif
 			len += sprintf(buf + len, "\n");
 		}
@@ -7608,7 +7608,7 @@ static IXJ *new_ixj(unsigned long port)
 }
 
 static int __init ixj_probe_isapnp(int *cnt)
-{               
+{
 	int probe = 0;
 	int func = 0x110;
         struct pnp_dev *dev = NULL, *old_dev = NULL;
@@ -7686,7 +7686,7 @@ static int __init ixj_probe_isapnp(int *cnt)
 	}
 	return probe;
 }
-                        
+
 static int __init ixj_probe_isa(int *cnt)
 {
 	int i, probe;
@@ -7713,7 +7713,7 @@ static int __init ixj_probe_isa(int *cnt)
 
 static int __init ixj_probe_pci(int *cnt)
 {
-	struct pci_dev *pci = NULL;   
+	struct pci_dev *pci = NULL;
 	int i, probe = 0;
 	IXJ *j = NULL;
 
@@ -7745,7 +7745,7 @@ static int __init ixj_probe_pci(int *cnt)
 static int __init ixj_init(void)
 {
 	int cnt = 0;
-	int probe = 0;   
+	int probe = 0;
 
 	cnt = 0;
 
@@ -7887,7 +7887,7 @@ static void DAA_Coeff_US(IXJ *j)
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[2] = 0x2D; */
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[1] = 0x62; */
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_1[0] = 0x2D; */
-	/* Bytes for Ringing part 2 (06):13,42,A6,BA,D4,73,CA,D5 */ 
+	/* Bytes for Ringing part 2 (06):13,42,A6,BA,D4,73,CA,D5 */
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[7] = 0x2D; */
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[6] = 0x62; */
 /*	j->m_DAAShadowRegs.COP_REGS.COP.RingerImpendance_2[5] = 0xA6; */
diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c
index 9b50b5bd4edb..c51f651dfd1b 100644
--- a/drivers/staging/tidspbridge/core/io_sm.c
+++ b/drivers/staging/tidspbridge/core/io_sm.c
@@ -2212,7 +2212,7 @@ void dump_dl_modules(struct bridge_dev_context *bridge_context)
 
 		if (status) {
 			pr_debug(
-			"%s: Failed to read dll_module stuct for 0x%x.\n",
+			"%s: Failed to read dll_module struct for 0x%x.\n",
 			__func__, module_dsp_addr);
 			break;
 		}
diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
index 006ffd752895..3d28b2345fbd 100644
--- a/drivers/staging/tidspbridge/core/ue_deh.c
+++ b/drivers/staging/tidspbridge/core/ue_deh.c
@@ -215,7 +215,7 @@ static inline const char *event_to_string(int event)
 	case DSP_MMUFAULT: return "DSP_MMUFAULT"; break;
 	case DSP_PWRERROR: return "DSP_PWRERROR"; break;
 	case DSP_WDTOVERFLOW: return "DSP_WDTOVERFLOW"; break;
-	default: return "unkown event"; break;
+	default: return "unknown event"; break;
 	}
 }
 
diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c
index fa870e3f7f6a..92ced35e6b7f 100644
--- a/drivers/staging/usbip/stub_dev.c
+++ b/drivers/staging/usbip/stub_dev.c
@@ -113,8 +113,8 @@ static ssize_t store_sockfd(struct device *dev, struct device_attribute *attr,
 
 		spin_unlock(&sdev->ud.lock);
 
-		sdev->ud.tcp_rx = kthread_run(stub_rx_loop, &sdev->ud, "stub_rx");
-		sdev->ud.tcp_tx = kthread_run(stub_tx_loop, &sdev->ud, "stub_tx");
+		sdev->ud.tcp_rx = kthread_get_run(stub_rx_loop, &sdev->ud, "stub_rx");
+		sdev->ud.tcp_tx = kthread_get_run(stub_tx_loop, &sdev->ud, "stub_tx");
 
 		spin_lock(&sdev->ud.lock);
 		sdev->ud.status = SDEV_ST_USED;
@@ -187,10 +187,10 @@ static void stub_shutdown_connection(struct usbip_device *ud)
 	}
 
 	/* 1. stop threads */
-	if (ud->tcp_rx && !task_is_dead(ud->tcp_rx))
-		kthread_stop(ud->tcp_rx);
-	if (ud->tcp_tx && !task_is_dead(ud->tcp_tx))
-		kthread_stop(ud->tcp_tx);
+	if (ud->tcp_rx)
+		kthread_stop_put(ud->tcp_rx);
+	if (ud->tcp_tx)
+		kthread_stop_put(ud->tcp_tx);
 
 	/*
 	 * 2. close the socket
diff --git a/drivers/staging/usbip/usbip_common.h b/drivers/staging/usbip/usbip_common.h
index c7b888ca54f5..5d89c0fd6f7b 100644
--- a/drivers/staging/usbip/usbip_common.h
+++ b/drivers/staging/usbip/usbip_common.h
@@ -292,6 +292,23 @@ struct usbip_device {
 	} eh_ops;
 };
 
+#define kthread_get_run(threadfn, data, namefmt, ...)			   \
+({									   \
+	struct task_struct *__k						   \
+		= kthread_create(threadfn, data, namefmt, ## __VA_ARGS__); \
+	if (!IS_ERR(__k)) {						   \
+		get_task_struct(__k);					   \
+		wake_up_process(__k);					   \
+	}								   \
+	__k;								   \
+})
+
+#define kthread_stop_put(k)		\
+	do {				\
+		kthread_stop(k);	\
+		put_task_struct(k);	\
+	} while (0)
+
 /* usbip_common.c */
 void usbip_dump_urb(struct urb *purb);
 void usbip_dump_header(struct usbip_header *pdu);
diff --git a/drivers/staging/usbip/usbip_protocol.txt b/drivers/staging/usbip/usbip_protocol.txt
index 0f102081e86c..16b6fe27284c 100644
--- a/drivers/staging/usbip/usbip_protocol.txt
+++ b/drivers/staging/usbip/usbip_protocol.txt
@@ -27,7 +27,7 @@ Once the client knows the list of exported USB devices it may decide to use one
 of them. First the client opens a TCP/IP connection towards the server and
 sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the
 import was successful the TCP/IP connection remains open and will be used
-to trasfer the URB traffic between the client and the server. The client may
+to transfer the URB traffic between the client and the server. The client may
 send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and
 USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the
 server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively.
diff --git a/drivers/staging/usbip/userspace/libsrc/vhci_driver.c b/drivers/staging/usbip/userspace/libsrc/vhci_driver.c
index 269787751b20..0958ba53e94a 100644
--- a/drivers/staging/usbip/userspace/libsrc/vhci_driver.c
+++ b/drivers/staging/usbip/userspace/libsrc/vhci_driver.c
@@ -59,7 +59,10 @@ static int parse_status(char *value)
 
 
 	/* skip a header line */
-	c = strchr(value, '\n') + 1;
+	c = strchr(value, '\n');
+	if (!c)
+		return -1;
+	c++;
 
 	while (*c != '\0') {
 		int port, status, speed, devid;
@@ -109,7 +112,10 @@ static int parse_status(char *value)
 
 
 		/* go to the next line */
-		c = strchr(c, '\n') + 1;
+		c = strchr(c, '\n');
+		if (!c)
+			break;
+		c++;
 	}
 
 	dbg("exit");
@@ -264,11 +270,17 @@ static int get_nports(void)
 	    attr_status->method, attr_status->value);
 
 	/* skip a header line */
-	c = strchr(attr_status->value, '\n') + 1;
+	c = strchr(attr_status->value, '\n');
+	if (!c)
+		return 0;
+	c++;
 
 	while (*c != '\0') {
 		/* go to the next line */
-		c = strchr(c, '\n') + 1;
+		c = strchr(c, '\n');
+		if (!c)
+			return nports;
+		c++;
 		nports += 1;
 	}
 
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
index dca9bf11f0c2..f708cbaee16b 100644
--- a/drivers/staging/usbip/vhci_hcd.c
+++ b/drivers/staging/usbip/vhci_hcd.c
@@ -821,10 +821,10 @@ static void vhci_shutdown_connection(struct usbip_device *ud)
 	}
 
 	/* kill threads related to this sdev, if v.c. exists */
-	if (vdev->ud.tcp_rx && !task_is_dead(vdev->ud.tcp_rx))
-		kthread_stop(vdev->ud.tcp_rx);
-	if (vdev->ud.tcp_tx && !task_is_dead(vdev->ud.tcp_tx))
-		kthread_stop(vdev->ud.tcp_tx);
+	if (vdev->ud.tcp_rx)
+		kthread_stop_put(vdev->ud.tcp_rx);
+	if (vdev->ud.tcp_tx)
+		kthread_stop_put(vdev->ud.tcp_tx);
 
 	pr_info("stop threads\n");
 
diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c
index f5fba7320c5a..f0eaf04fa25b 100644
--- a/drivers/staging/usbip/vhci_rx.c
+++ b/drivers/staging/usbip/vhci_rx.c
@@ -162,7 +162,7 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev,
 		 * already received the result of its submit result and gave
 		 * back the URB.
 		 */
-		pr_info("the urb (seqnum %d) was already given backed\n",
+		pr_info("the urb (seqnum %d) was already given back\n",
 			pdu->base.seqnum);
 	} else {
 		usbip_dbg_vhci_rx("now giveback urb %p\n", urb);
diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c
index 0cd039bb5fd6..7ce9c2f7e442 100644
--- a/drivers/staging/usbip/vhci_sysfs.c
+++ b/drivers/staging/usbip/vhci_sysfs.c
@@ -222,8 +222,8 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
 	spin_unlock(&the_controller->lock);
 	/* end the lock */
 
-	vdev->ud.tcp_rx = kthread_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
-	vdev->ud.tcp_tx = kthread_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
+	vdev->ud.tcp_rx = kthread_get_run(vhci_rx_loop, &vdev->ud, "vhci_rx");
+	vdev->ud.tcp_tx = kthread_get_run(vhci_tx_loop, &vdev->ud, "vhci_tx");
 
 	rh_port_connect(rhport, speed);
 
diff --git a/drivers/staging/vme/Makefile b/drivers/staging/vme/Makefile
index b4ea3f8d0a50..accdb72e39e2 100644
--- a/drivers/staging/vme/Makefile
+++ b/drivers/staging/vme/Makefile
@@ -1,8 +1 @@
-#
-# Makefile for the VME bridge device drivers.
-#
-obj-$(CONFIG_VME_BUS)		+= vme.o
-
-obj-y				+= bridges/
 obj-y				+= devices/
-obj-y				+= boards/
diff --git a/drivers/staging/vme/TODO b/drivers/staging/vme/TODO
deleted file mode 100644
index 79f00333e7ef..000000000000
--- a/drivers/staging/vme/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-				TODO
-				====
-
-- Add one or more device drivers which use the VME framework.
-
diff --git a/drivers/staging/vme/devices/Kconfig b/drivers/staging/vme/devices/Kconfig
index 55ec30cb1fa2..d0cab1766190 100644
--- a/drivers/staging/vme/devices/Kconfig
+++ b/drivers/staging/vme/devices/Kconfig
@@ -2,6 +2,7 @@ comment "VME Device Drivers"
 
 config VME_USER
 	tristate "VME user space access driver"
+	depends on STAGING
 	help
 	  If you say Y here you want to be able to access a limited number of
 	  VME windows in a manner at least semi-compatible with the interface
@@ -9,7 +10,7 @@ config VME_USER
 
 config VME_PIO2
 	tristate "GE PIO2 VME"
-	depends on GPIOLIB
+	depends on STAGING && GPIOLIB
 	help
 	  Say Y here to include support for the GE PIO2. The PIO2 is a 6U VME
 	  slave card, implementing 32 solid-state relay switched IO lines, in
diff --git a/drivers/staging/vme/devices/vme_pio2_cntr.c b/drivers/staging/vme/devices/vme_pio2_cntr.c
index 08e0d59806ca..6335471faa36 100644
--- a/drivers/staging/vme/devices/vme_pio2_cntr.c
+++ b/drivers/staging/vme/devices/vme_pio2_cntr.c
@@ -17,8 +17,8 @@
 #include <linux/device.h>
 #include <linux/types.h>
 #include <linux/gpio.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "vme_pio2.h"
 
 static int pio2_cntr_irq_set(struct pio2_card *card, int id)
diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c
index 573c80003f0c..4bf8e05ac312 100644
--- a/drivers/staging/vme/devices/vme_pio2_core.c
+++ b/drivers/staging/vme/devices/vme_pio2_core.c
@@ -10,7 +10,6 @@
  * option) any later version.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
@@ -20,8 +19,8 @@
 #include <linux/ctype.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "vme_pio2.h"
 
 
diff --git a/drivers/staging/vme/devices/vme_pio2_gpio.c b/drivers/staging/vme/devices/vme_pio2_gpio.c
index 858484915f08..ad76a477825b 100644
--- a/drivers/staging/vme/devices/vme_pio2_gpio.c
+++ b/drivers/staging/vme/devices/vme_pio2_gpio.c
@@ -10,7 +10,6 @@
  * option) any later version.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
@@ -21,8 +20,8 @@
 #include <linux/ctype.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "vme_pio2.h"
 
 static const char driver_name[] = "pio2_gpio";
@@ -79,7 +78,7 @@ static void pio2_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) |
 		(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
 
-		dev_err(&card->vdev->dev, "Channel not availabe as output\n");
+		dev_err(&card->vdev->dev, "Channel not available as output\n");
 		return;
 	}
 
diff --git a/drivers/staging/vme/devices/vme_user.c b/drivers/staging/vme/devices/vme_user.c
index 7dcd1622b5f5..e24a6f95db12 100644
--- a/drivers/staging/vme/devices/vme_user.c
+++ b/drivers/staging/vme/devices/vme_user.c
@@ -27,7 +27,7 @@
 #include <linux/module.h>
 #include <linux/pagemap.h>
 #include <linux/pci.h>
-#include <linux/semaphore.h>
+#include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/syscalls.h>
@@ -36,8 +36,8 @@
 
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "vme_user.h"
 
 static DEFINE_MUTEX(vme_user_mutex);
@@ -95,7 +95,7 @@ struct image_desc {
 	void *kern_buf;	/* Buffer address in kernel space */
 	dma_addr_t pci_buf;	/* Buffer address in PCI address space */
 	unsigned long long size_buf;	/* Buffer size */
-	struct semaphore sem;	/* Semaphore for locking image */
+	struct mutex mutex;	/* Mutex for locking image */
 	struct device *device;	/* Sysfs device */
 	struct vme_resource *resource;	/* VME resource */
 	int users;		/* Number of current users */
@@ -168,7 +168,7 @@ static int vme_user_open(struct inode *inode, struct file *file)
 	int err;
 	unsigned int minor = MINOR(inode->i_rdev);
 
-	down(&image[minor].sem);
+	mutex_lock(&image[minor].mutex);
 	/* Allow device to be opened if a resource is needed and allocated. */
 	if (minor < CONTROL_MINOR && image[minor].resource == NULL) {
 		printk(KERN_ERR "No resources allocated for device\n");
@@ -179,12 +179,12 @@ static int vme_user_open(struct inode *inode, struct file *file)
 	/* Increment user count */
 	image[minor].users++;
 
-	up(&image[minor].sem);
+	mutex_unlock(&image[minor].mutex);
 
 	return 0;
 
 err_res:
-	up(&image[minor].sem);
+	mutex_unlock(&image[minor].mutex);
 
 	return err;
 }
@@ -193,12 +193,12 @@ static int vme_user_release(struct inode *inode, struct file *file)
 {
 	unsigned int minor = MINOR(inode->i_rdev);
 
-	down(&image[minor].sem);
+	mutex_lock(&image[minor].mutex);
 
 	/* Decrement user count */
 	image[minor].users--;
 
-	up(&image[minor].sem);
+	mutex_unlock(&image[minor].mutex);
 
 	return 0;
 }
@@ -325,14 +325,14 @@ static ssize_t vme_user_read(struct file *file, char __user *buf, size_t count,
 	if (minor == CONTROL_MINOR)
 		return 0;
 
-	down(&image[minor].sem);
+	mutex_lock(&image[minor].mutex);
 
 	/* XXX Do we *really* want this helper - we can use vme_*_get ? */
 	image_size = vme_get_size(image[minor].resource);
 
 	/* Ensure we are starting at a valid location */
 	if ((*ppos < 0) || (*ppos > (image_size - 1))) {
-		up(&image[minor].sem);
+		mutex_unlock(&image[minor].mutex);
 		return 0;
 	}
 
@@ -353,8 +353,7 @@ static ssize_t vme_user_read(struct file *file, char __user *buf, size_t count,
 		retval = -EINVAL;
 	}
 
-	up(&image[minor].sem);
-
+	mutex_unlock(&image[minor].mutex);
 	if (retval > 0)
 		*ppos += retval;
 
@@ -372,13 +371,13 @@ static ssize_t vme_user_write(struct file *file, const char __user *buf,
 	if (minor == CONTROL_MINOR)
 		return 0;
 
-	down(&image[minor].sem);
+	mutex_lock(&image[minor].mutex);
 
 	image_size = vme_get_size(image[minor].resource);
 
 	/* Ensure we are starting at a valid location */
 	if ((*ppos < 0) || (*ppos > (image_size - 1))) {
-		up(&image[minor].sem);
+		mutex_unlock(&image[minor].mutex);
 		return 0;
 	}
 
@@ -398,8 +397,8 @@ static ssize_t vme_user_write(struct file *file, const char __user *buf,
 	default:
 		retval = -EINVAL;
 	}
-
-	up(&image[minor].sem);
+	
+	mutex_unlock(&image[minor].mutex);
 
 	if (retval > 0)
 		*ppos += retval;
@@ -416,7 +415,7 @@ static loff_t vme_user_llseek(struct file *file, loff_t off, int whence)
 	if (minor == CONTROL_MINOR)
 		return -EINVAL;
 
-	down(&image[minor].sem);
+	mutex_lock(&image[minor].mutex);
 	image_size = vme_get_size(image[minor].resource);
 
 	switch (whence) {
@@ -430,19 +429,19 @@ static loff_t vme_user_llseek(struct file *file, loff_t off, int whence)
 		absolute = image_size + off;
 		break;
 	default:
-		up(&image[minor].sem);
+		mutex_unlock(&image[minor].mutex);
 		return -EINVAL;
 		break;
 	}
 
 	if ((absolute < 0) || (absolute >= image_size)) {
-		up(&image[minor].sem);
+		mutex_unlock(&image[minor].mutex);
 		return -EINVAL;
 	}
 
 	file->f_pos = absolute;
 
-	up(&image[minor].sem);
+	mutex_unlock(&image[minor].mutex);
 
 	return absolute;
 }
@@ -696,7 +695,7 @@ static int __devinit vme_user_probe(struct vme_dev *vdev)
 	for (i = 0; i < VME_DEVS; i++) {
 		image[i].kern_buf = NULL;
 		image[i].pci_buf = 0;
-		sema_init(&image[i].sem, 1);
+		mutex_init(&image[i].mutex);
 		image[i].device = NULL;
 		image[i].resource = NULL;
 		image[i].users = 0;
@@ -858,8 +857,10 @@ static int __devexit vme_user_remove(struct vme_dev *dev)
 	int i;
 
 	/* Remove sysfs Entries */
-	for (i = 0; i < VME_DEVS; i++)
+	for (i = 0; i < VME_DEVS; i++) {
+		mutex_destroy(&image[i].mutex);
 		device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i));
+	}
 	class_destroy(vme_user_sysfs_class);
 
 	for (i = MASTER_MINOR; i < (MASTER_MAX + 1); i++) {
diff --git a/drivers/staging/vme/vme.h b/drivers/staging/vme/vme.h
deleted file mode 100644
index c9d65bf14cec..000000000000
--- a/drivers/staging/vme/vme.h
+++ /dev/null
@@ -1,174 +0,0 @@
-#ifndef _VME_H_
-#define _VME_H_
-
-/* Resource Type */
-enum vme_resource_type {
-	VME_MASTER,
-	VME_SLAVE,
-	VME_DMA,
-	VME_LM
-};
-
-/* VME Address Spaces */
-#define VME_A16		0x1
-#define VME_A24		0x2
-#define	VME_A32		0x4
-#define VME_A64		0x8
-#define VME_CRCSR	0x10
-#define VME_USER1	0x20
-#define VME_USER2	0x40
-#define VME_USER3	0x80
-#define VME_USER4	0x100
-
-#define VME_A16_MAX	0x10000ULL
-#define VME_A24_MAX	0x1000000ULL
-#define VME_A32_MAX	0x100000000ULL
-#define VME_A64_MAX	0x10000000000000000ULL
-#define VME_CRCSR_MAX	0x1000000ULL
-
-
-/* VME Cycle Types */
-#define VME_SCT		0x1
-#define VME_BLT		0x2
-#define VME_MBLT	0x4
-#define VME_2eVME	0x8
-#define VME_2eSST	0x10
-#define VME_2eSSTB	0x20
-
-#define VME_2eSST160	0x100
-#define VME_2eSST267	0x200
-#define VME_2eSST320	0x400
-
-#define	VME_SUPER	0x1000
-#define	VME_USER	0x2000
-#define	VME_PROG	0x4000
-#define	VME_DATA	0x8000
-
-/* VME Data Widths */
-#define VME_D8		0x1
-#define VME_D16		0x2
-#define VME_D32		0x4
-#define VME_D64		0x8
-
-/* Arbitration Scheduling Modes */
-#define VME_R_ROBIN_MODE	0x1
-#define VME_PRIORITY_MODE	0x2
-
-#define VME_DMA_PATTERN			(1<<0)
-#define VME_DMA_PCI			(1<<1)
-#define VME_DMA_VME			(1<<2)
-
-#define VME_DMA_PATTERN_BYTE		(1<<0)
-#define VME_DMA_PATTERN_WORD		(1<<1)
-#define VME_DMA_PATTERN_INCREMENT	(1<<2)
-
-#define VME_DMA_VME_TO_MEM		(1<<0)
-#define VME_DMA_MEM_TO_VME		(1<<1)
-#define VME_DMA_VME_TO_VME		(1<<2)
-#define VME_DMA_MEM_TO_MEM		(1<<3)
-#define VME_DMA_PATTERN_TO_VME		(1<<4)
-#define VME_DMA_PATTERN_TO_MEM		(1<<5)
-
-struct vme_dma_attr {
-	u32 type;
-	void *private;
-};
-
-struct vme_resource {
-	enum vme_resource_type type;
-	struct list_head *entry;
-};
-
-extern struct bus_type vme_bus_type;
-
-/* VME_MAX_BRIDGES comes from the type of vme_bus_numbers */
-#define VME_MAX_BRIDGES		(sizeof(unsigned int)*8)
-#define VME_MAX_SLOTS		32
-
-#define VME_SLOT_CURRENT	-1
-#define VME_SLOT_ALL		-2
-
-/**
- * Structure representing a VME device
- * @num: The device number
- * @bridge: Pointer to the bridge device this device is on
- * @dev: Internal device structure
- * @drv_list: List of devices (per driver)
- * @bridge_list: List of devices (per bridge)
- */
-struct vme_dev {
-	int num;
-	struct vme_bridge *bridge;
-	struct device dev;
-	struct list_head drv_list;
-	struct list_head bridge_list;
-};
-
-struct vme_driver {
-	struct list_head node;
-	const char *name;
-	int (*match)(struct vme_dev *);
-	int (*probe)(struct vme_dev *);
-	int (*remove)(struct vme_dev *);
-	void (*shutdown)(void);
-	struct device_driver driver;
-	struct list_head devices;
-};
-
-void *vme_alloc_consistent(struct vme_resource *, size_t, dma_addr_t *);
-void vme_free_consistent(struct vme_resource *, size_t,  void *,
-	dma_addr_t);
-
-size_t vme_get_size(struct vme_resource *);
-
-struct vme_resource *vme_slave_request(struct vme_dev *, u32, u32);
-int vme_slave_set(struct vme_resource *, int, unsigned long long,
-	unsigned long long, dma_addr_t, u32, u32);
-int vme_slave_get(struct vme_resource *, int *, unsigned long long *,
-	unsigned long long *, dma_addr_t *, u32 *, u32 *);
-void vme_slave_free(struct vme_resource *);
-
-struct vme_resource *vme_master_request(struct vme_dev *, u32, u32, u32);
-int vme_master_set(struct vme_resource *, int, unsigned long long,
-	unsigned long long, u32, u32, u32);
-int vme_master_get(struct vme_resource *, int *, unsigned long long *,
-	unsigned long long *, u32 *, u32 *, u32 *);
-ssize_t vme_master_read(struct vme_resource *, void *, size_t, loff_t);
-ssize_t vme_master_write(struct vme_resource *, void *, size_t, loff_t);
-unsigned int vme_master_rmw(struct vme_resource *, unsigned int, unsigned int,
-	unsigned int, loff_t);
-void vme_master_free(struct vme_resource *);
-
-struct vme_resource *vme_dma_request(struct vme_dev *, u32);
-struct vme_dma_list *vme_new_dma_list(struct vme_resource *);
-struct vme_dma_attr *vme_dma_pattern_attribute(u32, u32);
-struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t);
-struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long, u32, u32, u32);
-void vme_dma_free_attribute(struct vme_dma_attr *);
-int vme_dma_list_add(struct vme_dma_list *, struct vme_dma_attr *,
-	struct vme_dma_attr *, size_t);
-int vme_dma_list_exec(struct vme_dma_list *);
-int vme_dma_list_free(struct vme_dma_list *);
-int vme_dma_free(struct vme_resource *);
-
-int vme_irq_request(struct vme_dev *, int, int,
-	void (*callback)(int, int, void *), void *);
-void vme_irq_free(struct vme_dev *, int, int);
-int vme_irq_generate(struct vme_dev *, int, int);
-
-struct vme_resource *vme_lm_request(struct vme_dev *);
-int vme_lm_count(struct vme_resource *);
-int vme_lm_set(struct vme_resource *, unsigned long long, u32, u32);
-int vme_lm_get(struct vme_resource *, unsigned long long *, u32 *, u32 *);
-int vme_lm_attach(struct vme_resource *, int, void (*callback)(int));
-int vme_lm_detach(struct vme_resource *, int);
-void vme_lm_free(struct vme_resource *);
-
-int vme_slot_get(struct vme_dev *);
-
-int vme_register_driver(struct vme_driver *, unsigned int);
-void vme_unregister_driver(struct vme_driver *);
-
-
-#endif /* _VME_H_ */
-
diff --git a/drivers/staging/vme/vme_api.txt b/drivers/staging/vme/vme_api.txt
deleted file mode 100644
index 856efa35f6e3..000000000000
--- a/drivers/staging/vme/vme_api.txt
+++ /dev/null
@@ -1,396 +0,0 @@
-			VME Device Driver API
-			=====================
-
-Driver registration
-===================
-
-As with other subsystems within the Linux kernel, VME device drivers register
-with the VME subsystem, typically called from the devices init routine.  This is
-achieved via a call to the following function:
-
-	int vme_register_driver (struct vme_driver *driver);
-
-If driver registration is successful this function returns zero, if an error
-occurred a negative error code will be returned.
-
-A pointer to a structure of type 'vme_driver' must be provided to the
-registration function. The structure is as follows:
-
-	struct vme_driver {
-		struct list_head node;
-		const char *name;
-		int (*match)(struct vme_dev *);
-		int (*probe)(struct vme_dev *);
-		int (*remove)(struct vme_dev *);
-		void (*shutdown)(void);
-		struct device_driver driver;
-		struct list_head devices;
-		unsigned int ndev;
-	};
-
-At the minimum, the '.name', '.match' and '.probe' elements of this structure
-should be correctly set. The '.name' element is a pointer to a string holding
-the device driver's name.
-
-The '.match' function allows controlling the number of devices that need to
-be registered. The match function should return 1 if a device should be
-probed and 0 otherwise. This example match function (from vme_user.c) limits
-the number of devices probed to one:
-
-	#define USER_BUS_MAX	1
-	...
-	static int vme_user_match(struct vme_dev *vdev)
-	{
-		if (vdev->id.num >= USER_BUS_MAX)
-			return 0;
-		return 1;
-	}
-
-The '.probe' element should contain a pointer to the probe routine. The
-probe routine is passed a 'struct vme_dev' pointer as an argument. The
-'struct vme_dev' structure looks like the following:
-
-	struct vme_dev {
-		int num;
-		struct vme_bridge *bridge;
-		struct device dev;
-		struct list_head drv_list;
-		struct list_head bridge_list;
-	};
-
-Here, the 'num' field refers to the sequential device ID for this specific
-driver. The bridge number (or bus number) can be accessed using
-dev->bridge->num.
-
-A function is also provided to unregister the driver from the VME core and is
-usually called from the device driver's exit routine:
-
-	void vme_unregister_driver (struct vme_driver *driver);
-
-
-Resource management
-===================
-
-Once a driver has registered with the VME core the provided match routine will
-be called the number of times specified during the registration. If a match
-succeeds, a non-zero value should be returned. A zero return value indicates
-failure. For all successful matches, the probe routine of the corresponding
-driver is called. The probe routine is passed a pointer to the devices
-device structure. This pointer should be saved, it will be required for
-requesting VME resources.
-
-The driver can request ownership of one or more master windows, slave windows
-and/or dma channels. Rather than allowing the device driver to request a
-specific window or DMA channel (which may be used by a different driver) this
-driver allows a resource to be assigned based on the required attributes of the
-driver in question:
-
-	struct vme_resource * vme_master_request(struct vme_dev *dev,
-		u32 aspace, u32 cycle, u32 width);
-
-	struct vme_resource * vme_slave_request(struct vme_dev *dev, u32 aspace,
-		u32 cycle);
-
-	struct vme_resource *vme_dma_request(struct vme_dev *dev, u32 route);
-
-For slave windows these attributes are split into the VME address spaces that
-need to be accessed in 'aspace' and VME bus cycle types required in 'cycle'.
-Master windows add a further set of attributes in 'width' specifying the
-required data transfer widths. These attributes are defined as bitmasks and as
-such any combination of the attributes can be requested for a single window,
-the core will assign a window that meets the requirements, returning a pointer
-of type vme_resource that should be used to identify the allocated resource
-when it is used. For DMA controllers, the request function requires the
-potential direction of any transfers to be provided in the route attributes.
-This is typically VME-to-MEM and/or MEM-to-VME, though some hardware can
-support VME-to-VME and MEM-to-MEM transfers as well as test pattern generation.
-If an unallocated window fitting the requirements can not be found a NULL
-pointer will be returned.
-
-Functions are also provided to free window allocations once they are no longer
-required. These functions should be passed the pointer to the resource provided
-during resource allocation:
-
-	void vme_master_free(struct vme_resource *res);
-
-	void vme_slave_free(struct vme_resource *res);
-
-	void vme_dma_free(struct vme_resource *res);
-
-
-Master windows
-==============
-
-Master windows provide access from the local processor[s] out onto the VME bus.
-The number of windows available and the available access modes is dependent on
-the underlying chipset. A window must be configured before it can be used.
-
-
-Master window configuration
----------------------------
-
-Once a master window has been assigned the following functions can be used to
-configure it and retrieve the current settings:
-
-	int vme_master_set (struct vme_resource *res, int enabled,
-		unsigned long long base, unsigned long long size, u32 aspace,
-		u32 cycle, u32 width);
-
-	int vme_master_get (struct vme_resource *res, int *enabled,
-		unsigned long long *base, unsigned long long *size, u32 *aspace,
-		u32 *cycle, u32 *width);
-
-The address spaces, transfer widths and cycle types are the same as described
-under resource management, however some of the options are mutually exclusive.
-For example, only one address space may be specified.
-
-These functions return 0 on success or an error code should the call fail.
-
-
-Master window access
---------------------
-
-The following functions can be used to read from and write to configured master
-windows. These functions return the number of bytes copied:
-
-	ssize_t vme_master_read(struct vme_resource *res, void *buf,
-		size_t count, loff_t offset);
-
-	ssize_t vme_master_write(struct vme_resource *res, void *buf,
-		size_t count, loff_t offset);
-
-In addition to simple reads and writes, a function is provided to do a
-read-modify-write transaction. This function returns the original value of the
-VME bus location :
-
-	unsigned int vme_master_rmw (struct vme_resource *res,
-		unsigned int mask, unsigned int compare, unsigned int swap,
-		loff_t offset);
-
-This functions by reading the offset, applying the mask. If the bits selected in
-the mask match with the values of the corresponding bits in the compare field,
-the value of swap is written the specified offset.
-
-
-Slave windows
-=============
-
-Slave windows provide devices on the VME bus access into mapped portions of the
-local memory. The number of windows available and the access modes that can be
-used is dependent on the underlying chipset. A window must be configured before
-it can be used.
-
-
-Slave window configuration
---------------------------
-
-Once a slave window has been assigned the following functions can be used to
-configure it and retrieve the current settings:
-
-	int vme_slave_set (struct vme_resource *res, int enabled,
-		unsigned long long base, unsigned long long size,
-		dma_addr_t mem, u32 aspace, u32 cycle);
-
-	int vme_slave_get (struct vme_resource *res, int *enabled,
-		unsigned long long *base, unsigned long long *size,
-		dma_addr_t *mem, u32 *aspace, u32 *cycle);
-
-The address spaces, transfer widths and cycle types are the same as described
-under resource management, however some of the options are mutually exclusive.
-For example, only one address space may be specified.
-
-These functions return 0 on success or an error code should the call fail.
-
-
-Slave window buffer allocation
-------------------------------
-
-Functions are provided to allow the user to allocate and free a contiguous
-buffers which will be accessible by the VME bridge. These functions do not have
-to be used, other methods can be used to allocate a buffer, though care must be
-taken to ensure that they are contiguous and accessible by the VME bridge:
-
-	void * vme_alloc_consistent(struct vme_resource *res, size_t size,
-		dma_addr_t *mem);
-
-	void vme_free_consistent(struct vme_resource *res, size_t size,
-		void *virt,	dma_addr_t mem);
-
-
-Slave window access
--------------------
-
-Slave windows map local memory onto the VME bus, the standard methods for
-accessing memory should be used.
-
-
-DMA channels
-============
-
-The VME DMA transfer provides the ability to run link-list DMA transfers. The
-API introduces the concept of DMA lists. Each DMA list is a link-list which can
-be passed to a DMA controller. Multiple lists can be created, extended,
-executed, reused and destroyed.
-
-
-List Management
----------------
-
-The following functions are provided to create and destroy DMA lists. Execution
-of a list will not automatically destroy the list, thus enabling a list to be
-reused for repetitive tasks:
-
-	struct vme_dma_list *vme_new_dma_list(struct vme_resource *res);
-
-	int vme_dma_list_free(struct vme_dma_list *list);
-
-
-List Population
----------------
-
-An item can be added to a list using the following function ( the source and
-destination attributes need to be created before calling this function, this is
-covered under "Transfer Attributes"):
-
-	int vme_dma_list_add(struct vme_dma_list *list,
-		struct vme_dma_attr *src, struct vme_dma_attr *dest,
-		size_t count);
-
-NOTE:	The detailed attributes of the transfers source and destination
-	are not checked until an entry is added to a DMA list, the request
-	for a DMA channel purely checks the directions in which the
-	controller is expected to transfer data. As a result it is
-	possible for this call to return an error, for example if the
-	source or destination is in an unsupported VME address space.
-
-Transfer Attributes
--------------------
-
-The attributes for the source and destination are handled separately from adding
-an item to a list. This is due to the diverse attributes required for each type
-of source and destination. There are functions to create attributes for PCI, VME
-and pattern sources and destinations (where appropriate):
-
-Pattern source:
-
-	struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, u32 type);
-
-PCI source or destination:
-
-	struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t mem);
-
-VME source or destination:
-
-	struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long base,
-		u32 aspace, u32 cycle, u32 width);
-
-The following function should be used to free an attribute:
-
-	void vme_dma_free_attribute(struct vme_dma_attr *attr);
-
-
-List Execution
---------------
-
-The following function queues a list for execution. The function will return
-once the list has been executed:
-
-	int vme_dma_list_exec(struct vme_dma_list *list);
-
-
-Interrupts
-==========
-
-The VME API provides functions to attach and detach callbacks to specific VME
-level and status ID combinations and for the generation of VME interrupts with
-specific VME level and status IDs.
-
-
-Attaching Interrupt Handlers
-----------------------------
-
-The following functions can be used to attach and free a specific VME level and
-status ID combination. Any given combination can only be assigned a single
-callback function. A void pointer parameter is provided, the value of which is
-passed to the callback function, the use of this pointer is user undefined:
-
-	int vme_irq_request(struct vme_dev *dev, int level, int statid,
-		void (*callback)(int, int, void *), void *priv);
-
-	void vme_irq_free(struct vme_dev *dev, int level, int statid);
-
-The callback parameters are as follows. Care must be taken in writing a callback
-function, callback functions run in interrupt context:
-
-	void callback(int level, int statid, void *priv);
-
-
-Interrupt Generation
---------------------
-
-The following function can be used to generate a VME interrupt at a given VME
-level and VME status ID:
-
-	int vme_irq_generate(struct vme_dev *dev, int level, int statid);
-
-
-Location monitors
-=================
-
-The VME API provides the following functionality to configure the location
-monitor.
-
-
-Location Monitor Management
----------------------------
-
-The following functions are provided to request the use of a block of location
-monitors and to free them after they are no longer required:
-
-	struct vme_resource * vme_lm_request(struct vme_dev *dev);
-
-	void vme_lm_free(struct vme_resource * res);
-
-Each block may provide a number of location monitors, monitoring adjacent
-locations. The following function can be used to determine how many locations
-are provided:
-
-	int vme_lm_count(struct vme_resource * res);
-
-
-Location Monitor Configuration
-------------------------------
-
-Once a bank of location monitors has been allocated, the following functions
-are provided to configure the location and mode of the location monitor:
-
-	int vme_lm_set(struct vme_resource *res, unsigned long long base,
-		u32 aspace, u32 cycle);
-
-	int vme_lm_get(struct vme_resource *res, unsigned long long *base,
-		u32 *aspace, u32 *cycle);
-
-
-Location Monitor Use
---------------------
-
-The following functions allow a callback to be attached and detached from each
-location monitor location. Each location monitor can monitor a number of
-adjacent locations:
-
-	int vme_lm_attach(struct vme_resource *res, int num,
-		void (*callback)(int));
-
-	int vme_lm_detach(struct vme_resource *res, int num);
-
-The callback function is declared as follows.
-
-	void callback(int num);
-
-
-Slot Detection
-==============
-
-This function returns the slot ID of the provided bridge.
-
-	int vme_slot_get(struct vme_dev *dev);
diff --git a/drivers/staging/vt6655/wpa.c b/drivers/staging/vt6655/wpa.c
index 61ac46fa505e..0afb9fe0379a 100644
--- a/drivers/staging/vt6655/wpa.c
+++ b/drivers/staging/vt6655/wpa.c
@@ -148,7 +148,7 @@ WPA_ParseRSN (
         {
             j = 0;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d, sizeof(pBSSList->abyPKType): %zu\n", pRSN->wPKCount, sizeof(pBSSList->abyPKType));
-            for(i = 0; (i < pRSN->wPKCount) && (j < sizeof(pBSSList->abyPKType)/sizeof(unsigned char)); i++) {
+            for(i = 0; (i < pRSN->wPKCount) && (j < ARRAY_SIZE(pBSSList->abyPKType)); i++) {
                 if(pRSN->len >= 12+i*4+4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*i)
                     if ( !memcmp(pRSN->PKSList[i].abyOUI, abyOUI00, 4))
                         pBSSList->abyPKType[j++] = WPA_NONE;
@@ -180,7 +180,7 @@ WPA_ParseRSN (
             j = 0;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d, sizeof(pBSSList->abyAuthType): %zu\n",
                           pIE_RSN_Auth->wAuthCount, sizeof(pBSSList->abyAuthType));
-            for(i = 0; (i < pIE_RSN_Auth->wAuthCount) && (j < sizeof(pBSSList->abyAuthType)/sizeof(unsigned char)); i++) {
+            for(i = 0; (i < pIE_RSN_Auth->wAuthCount) && (j < ARRAY_SIZE(pBSSList->abyAuthType)); i++) {
                 if(pRSN->len >= 14+4+(m+i)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*i)
                     if ( !memcmp(pIE_RSN_Auth->AuthKSList[i].abyOUI, abyOUI01, 4))
                         pBSSList->abyAuthType[j++] = WPA_AUTH_IEEE802_1X;
diff --git a/drivers/staging/vt6656/dpc.c b/drivers/staging/vt6656/dpc.c
index c0edf97535dc..e4bdf2a2b582 100644
--- a/drivers/staging/vt6656/dpc.c
+++ b/drivers/staging/vt6656/dpc.c
@@ -452,7 +452,7 @@ RXbBulkInProcessData (
        }
     }
 
-    if (!is_multicast_ether_addr(pMACHeader->abyAddr1) && !is_broadcast_ether_addr(pMACHeader->abyAddr1)) {
+    if (!is_multicast_ether_addr(pMACHeader->abyAddr1)) {
         if ( WCTLbIsDuplicate(&(pDevice->sDupRxCache), (PS802_11Header) pbyFrame) ) {
             pDevice->s802_11Counter.FrameDuplicateCount++;
             return FALSE;
diff --git a/drivers/staging/vt6656/ioctl.c b/drivers/staging/vt6656/ioctl.c
index d59456c29df1..5b9a84f95185 100644
--- a/drivers/staging/vt6656/ioctl.c
+++ b/drivers/staging/vt6656/ioctl.c
@@ -90,18 +90,17 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 		spin_lock_irq(&pDevice->lock);
 
 		if (memcmp(pMgmt->abyCurrBSSID, &abyNullAddr[0], 6) == 0)
-			BSSvClearBSSList((void *)pDevice, FALSE);
+			BSSvClearBSSList(pDevice, FALSE);
 		else
-			BSSvClearBSSList((void *)pDevice, pDevice->bLinkPass);
+			BSSvClearBSSList(pDevice, pDevice->bLinkPass);
 
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_BSS_SCAN..begin\n");
 
 		if (pItemSSID->len != 0)
-			bScheduleCommand((void *)pDevice,
-					 WLAN_CMD_BSSID_SCAN,
+			bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN,
 					 abyScanSSID);
 		else
-			bScheduleCommand((void *) pDevice, WLAN_CMD_BSSID_SCAN, NULL);
+			bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN, NULL);
 
 		spin_unlock_irq(&pDevice->lock);
 		break;
@@ -150,6 +149,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 			}
 		}
 		break;
+
 	case WLAN_CMD_BSS_JOIN:
 		if (copy_from_user(&sJoinCmd, pReq->data, sizeof(SCmdBSSJoin))) {
 			result = -EFAULT;
@@ -190,10 +190,9 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 		netif_stop_queue(pDevice->dev);
 		spin_lock_irq(&pDevice->lock);
 		pMgmt->eCurrState = WMAC_STATE_IDLE;
-		bScheduleCommand((void *) pDevice,
-				 WLAN_CMD_BSSID_SCAN,
+		bScheduleCommand(pDevice, WLAN_CMD_BSSID_SCAN,
 				 pMgmt->abyDesireSSID);
-		bScheduleCommand((void *) pDevice, WLAN_CMD_SSID, NULL);
+		bScheduleCommand(pDevice, WLAN_CMD_SSID, NULL);
 		spin_unlock_irq(&pDevice->lock);
 		break;
 
@@ -299,7 +298,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 			result = -EINVAL;
 			break;
 		}
-		pList = (PSBSSIDList)kmalloc(sizeof(SBSSIDList) + (sList.uItem * sizeof(SBSSIDItem)), (int)GFP_ATOMIC);
+		pList = kmalloc(sizeof(SBSSIDList) + (sList.uItem * sizeof(SBSSIDItem)), GFP_ATOMIC);
 		if (pList == NULL) {
 			result = -ENOMEM;
 			break;
@@ -313,7 +312,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 				pList->sBSSIDList[ii].wBeaconInterval = pBSS->wBeaconInterval;
 				pList->sBSSIDList[ii].wCapInfo = pBSS->wCapInfo;
 				RFvRSSITodBm(pDevice, (BYTE)(pBSS->uRSSI), &ldBm);
-				pList->sBSSIDList[ii].uRSSI = (unsigned int) ldBm;
+				pList->sBSSIDList[ii].uRSSI = (unsigned int)ldBm;
 				/* pList->sBSSIDList[ii].uRSSI = pBSS->uRSSI; */
 				memcpy(pList->sBSSIDList[ii].abyBSSID, pBSS->abyBSSID, WLAN_BSSID_LEN);
 				pItemSSID = (PWLAN_IE_SSID)pBSS->abySSID;
@@ -356,6 +355,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 			break;
 		}
 		break;
+
 	case WLAN_CMD_STOP_MAC:
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_STOP_MAC\n");
 		/* Todo xxxxxx */
@@ -534,7 +534,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 
 		netif_stop_queue(pDevice->dev);
 		spin_lock_irq(&pDevice->lock);
-		bScheduleCommand((void *)pDevice, WLAN_CMD_RUN_AP, NULL);
+		bScheduleCommand(pDevice, WLAN_CMD_RUN_AP, NULL);
 		spin_unlock_irq(&pDevice->lock);
 		break;
 
@@ -565,7 +565,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq)
 			result = -ENOMEM;
 			break;
 		}
-		pNodeList = kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), (int)GFP_ATOMIC);
+		pNodeList = kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), GFP_ATOMIC);
 		if (pNodeList == NULL) {
 			result = -ENOMEM;
 			break;
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index 763e028a5cc5..ee5261a36886 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -1257,9 +1257,7 @@ static void __devexit vt6656_disconnect(struct usb_interface *intf)
 	}
 
 	device_release_WPADEV(device);
-
-	if (device->firmware)
-		release_firmware(device->firmware);
+	release_firmware(device->firmware);
 
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(interface_to_usbdev(intf));
diff --git a/drivers/staging/vt6656/wpa.c b/drivers/staging/vt6656/wpa.c
index 7dde3d6941ab..b16d4ddc117b 100644
--- a/drivers/staging/vt6656/wpa.c
+++ b/drivers/staging/vt6656/wpa.c
@@ -149,7 +149,7 @@ WPA_ParseRSN(
             j = 0;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d, sizeof(pBSSList->abyPKType): %zu\n", pRSN->wPKCount, sizeof(pBSSList->abyPKType));
 	    for (i = 0; (i < pRSN->wPKCount) &&
-		   (j < sizeof(pBSSList->abyPKType)/sizeof(BYTE)); i++) {
+		   (j < ARRAY_SIZE(pBSSList->abyPKType)); i++) {
                 if(pRSN->len >= 12+i*4+4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*i)
                     if ( !memcmp(pRSN->PKSList[i].abyOUI, abyOUI00, 4))
                         pBSSList->abyPKType[j++] = WPA_NONE;
@@ -182,7 +182,7 @@ WPA_ParseRSN(
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d, sizeof(pBSSList->abyAuthType): %zu\n",
                           pIE_RSN_Auth->wAuthCount, sizeof(pBSSList->abyAuthType));
 	    for (i = 0; (i < pIE_RSN_Auth->wAuthCount) &&
-		   (j < sizeof(pBSSList->abyAuthType)/sizeof(BYTE)); i++) {
+		   (j < ARRAY_SIZE(pBSSList->abyAuthType)); i++) {
                 if(pRSN->len >= 14+4+(m+i)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*i)
                     if ( !memcmp(pIE_RSN_Auth->AuthKSList[i].abyOUI, abyOUI01, 4))
                         pBSSList->abyAuthType[j++] = WPA_AUTH_IEEE802_1X;
diff --git a/drivers/staging/wlags49_h2/README.ubuntu b/drivers/staging/wlags49_h2/README.ubuntu
index edee8b9385be..5f1cfb8fd427 100644
--- a/drivers/staging/wlags49_h2/README.ubuntu
+++ b/drivers/staging/wlags49_h2/README.ubuntu
@@ -87,7 +87,7 @@ The linux driver files (wl_xxxx.c) are changed in the following ways:
 -- Recovery actions added
 
 The major problem was the order in which calls can be made. The original
-looks like a traditonal UNIX driver. To call an "ioctl" function you
+looks like a traditional UNIX driver. To call an "ioctl" function you
 have to "open" the device first to get a handle and after "close" no
 "ioctl" function can be called anymore. With the 2.6 driver this all
 changed; the former ioctl functions are now called before "open" and
diff --git a/drivers/staging/wlags49_h2/hcf.c b/drivers/staging/wlags49_h2/hcf.c
index 5957c3a439ac..366e4a4b75c5 100644
--- a/drivers/staging/wlags49_h2/hcf.c
+++ b/drivers/staging/wlags49_h2/hcf.c
@@ -2871,8 +2871,8 @@ or
 *   The Assert validates the HCF assumption about Hermes implementation upon which the range of
 *   Pseudo-RIDs is based.
 *   Then the control fields up to the start of the 802.3 frame are read from the NIC into the lookahead buffer.
-*   The status field is converted to native Endianess.
-*   The length is, after implicit Endianess conversion if needed, and adjustment for the 14 bytes of the
+*   The status field is converted to native Endianness.
+*   The length is, after implicit Endianness conversion if needed, and adjustment for the 14 bytes of the
 *   802.3 MAC header, stored in IFB_RxLen.
 *   In MAC Monitor mode, 802.11 control frames with a TOTAL length of 14 are received, so without this
 *   length adjustment, IFB_RxLen could not be used to distinguish these frames from "no frame".
@@ -2894,7 +2894,7 @@ or
 *     - the Hermes reported Tunnel encapsulation or
 *     - the Hermes reported 1042 Encapsulation and hcf_encap reports that the HCF would not have used
 *       1042 as the encapsulation mechanism
-*   Note that the first field of the RxFS in bufp has Native Endianess due to the conversion done by the
+*   Note that the first field of the RxFS in bufp has Native Endianness due to the conversion done by the
 *   BE_PAR in get_frag.
 *36: The Type field is the only word kept (after moving) of the just read 8 bytes, it is moved to the
 *   L-field.  The original L-field and 6 byte SNAP header are discarded, so IFB_RxLen and buf_addr must
@@ -3831,7 +3831,7 @@ get_fid( IFBP ifbp )
  *.DESCRIPTION
  * process the single byte (if applicable) read by the previous get_frag and copy len (or len-1) bytes from
  * NIC to bufp.
- * On a Big Endian platform, the parameter word_len controls the number of leading bytes whose endianess is
+ * On a Big Endian platform, the parameter word_len controls the number of leading bytes whose endianness is
  * converted (i.e. byte swapped)
  *
  *
@@ -3980,7 +3980,7 @@ get_frag( IFBP ifbp, wci_bufp bufp, int len BE_PAR( int word_len ) )
  *    appropriate means on H-I: always
  *    and on H-II if F/W supplier reflects a primary (i.e. only after an Hermes Reset or Init
  *    command).
- *    QUESTION ;? !!!!!! should, For each of the above RIDs the Endianess is converted to native Endianess.
+ *    QUESTION ;? !!!!!! should, For each of the above RIDs the Endianness is converted to native Endianness.
  *    Only the return code of the first hcf_get_info is used. All hcf_get_info calls are made, regardless of
  *    the success or failure of the 1st hcf_get_info. The assumptions are:
  *     - if any call fails, they all fail, so remembering the result of the 1st call is adequate
diff --git a/drivers/staging/wlags49_h2/hcf.h b/drivers/staging/wlags49_h2/hcf.h
index 95527b5cf863..68e23303b5e8 100644
--- a/drivers/staging/wlags49_h2/hcf.h
+++ b/drivers/staging/wlags49_h2/hcf.h
@@ -90,7 +90,7 @@
 
 #define LOF(x) 			(sizeof(x)/sizeof(hcf_16)-1)
 
-/*	Endianess
+/*	Endianness
  *	Little Endian (a.k.a. Intel), least significant byte first
  *	Big Endian (a.k.a. Motorola), most significant byte first
  *
@@ -101,7 +101,7 @@
  */
 
 /* To increase portability, use unsigned char and unsigned char * when accessing parts of larger
- * types to convert their Endianess
+ * types to convert their Endianness
  */
 
 #define CNV_END_SHORT(w)  (hcf_16)( ((hcf_16)(w) & 0x00FF) << 8 | ((hcf_16)(w) & 0xFF00) >> 8 )
@@ -109,14 +109,14 @@
 
 #if HCF_BIG_ENDIAN
 //******************************************** B I G   E N D I A N *******************************************
-#define CNV_LITTLE_TO_SHORT(w)	CNV_END_SHORT(w)	//    endianess conversion needed
-#define CNV_BIG_TO_SHORT(w)		(w)				// no endianess conversion needed
+#define CNV_LITTLE_TO_SHORT(w)	CNV_END_SHORT(w)	//    endianness conversion needed
+#define CNV_BIG_TO_SHORT(w)		(w)				// no endianness conversion needed
 #define CNV_LITTLE_TO_LONG(dw)	CNV_END_LONG(dw)
 #define CNV_LONG_TO_LITTLE(dw)	CNV_END_LONG(dw)
 #else
 //****************************************** L I T T L E   E N D I A N ****************************************
-#define CNV_LITTLE_TO_SHORT(w) 	(w)				// no endianess conversion needed
-#define CNV_BIG_TO_SHORT(w)		CNV_END_SHORT(w)	//    endianess conversion needed
+#define CNV_LITTLE_TO_SHORT(w) 	(w)				// no endianness conversion needed
+#define CNV_BIG_TO_SHORT(w)		CNV_END_SHORT(w)	//    endianness conversion needed
 #define CNV_LITTLE_TO_LONG(dw)	(dw)
 #define CNV_LONG_TO_LITTLE(dw)	(dw)
 
diff --git a/drivers/staging/wlags49_h2/mmd.c b/drivers/staging/wlags49_h2/mmd.c
index c8f52107e6ca..7204a373bc51 100644
--- a/drivers/staging/wlags49_h2/mmd.c
+++ b/drivers/staging/wlags49_h2/mmd.c
@@ -101,10 +101,10 @@
 *	supp	address of the supplier specification
 *
 *	Description: mmd_check_comp is a support routine to check the compatibility between an actor and a
-*	supplier.  mmd_check_comp is independent of the endianess of the actp and supp structures. This is
+*	supplier.  mmd_check_comp is independent of the endianness of the actp and supp structures. This is
 *	achieved by checking the "bottom" or "role" fields of these structures. Since these fields are restricted
 *	to a limited range, comparing the contents to a value with a known endian-ess gives a clue to their actual
-*	endianess.
+*	endianness.
 *
 *.DIAGRAM
 *1a: The role-field of the actor structure has a known non-zero, not "byte symmetric" value (namely
@@ -114,16 +114,16 @@
 *	for a supplier. A supplier has always exactly 1 variant,top,bottom record with (officially, but see the
 *	note below) each of these 3 values in the range 1 through 99, so one byte of the word value of variant,
 *	top and bottom words is 0x00 and the other byte is non-zero. Whether the lowest address byte or the
-*	highest address byte is non-zero depends on the Endianess of the LTV. If and only if the word value of
+*	highest address byte is non-zero depends on the Endianness of the LTV. If and only if the word value of
 *	bottom is less than 0x0100, the supplier is Native Endian.
 *	NOTE: the variant field of the supplier structure can not be used for the Endian Detection Algorithm,
 *	because a a zero-valued variant has been used as Controlled Deployment indication in the past.
 *	Note: An actor may have multiple sets of variant,top,bottom records, including dummy sets with variant,
-*	top and bottom fields with a zero-value. As a consequence the endianess of the actor can not be determined
+*	top and bottom fields with a zero-value. As a consequence the endianness of the actor can not be determined
 *	based on its variant,top,bottom values.
 *
 *	Note: the L and T field of the structures are always in Native Endian format, so you can not draw
-*	conclusions concerning the Endianess of the structure based on these two fields.
+*	conclusions concerning the Endianness of the structure based on these two fields.
 *
 *1b/2b
 *	The only purpose of the CFG_RANGE_SPEC_BYTE_STRCT is to give easy access to the non-zero byte of the word
@@ -149,7 +149,7 @@
 *
 *	This is implemented as:
 *	#if HCF_BIG_ENDIAN == 0	//platform is LE
-*		sup/act_endian becomes reverse of structure-endianess as determined in 1a/1b
+*		sup/act_endian becomes reverse of structure-endianness as determined in 1a/1b
 *	#endif
 *6:	Each of the actor variant-bottom-top records is checked against the (single) supplier variant-bottom-top
 *	range till either an acceptable match is found or all actor records are tried. As explained above, due to
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index 7084f414846e..7c7c77f9c862 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -177,10 +177,9 @@ static void wl_adapter_detach(struct pcmcia_device *link)
 	if (dev) {
 		unregister_wlags_sysfs(dev);
 		unregister_netdev(dev);
+		wl_device_dealloc(dev);
 	}
 
-	wl_device_dealloc(dev);
-
 	DBG_LEAVE(DbgInfo);
 } /* wl_adapter_detach */
 /*============================================================================*/
diff --git a/drivers/staging/wlags49_h2/wl_netdev.c b/drivers/staging/wlags49_h2/wl_netdev.c
index 90820ff1aced..824b85232353 100644
--- a/drivers/staging/wlags49_h2/wl_netdev.c
+++ b/drivers/staging/wlags49_h2/wl_netdev.c
@@ -1063,7 +1063,7 @@ void wl_multicast( struct net_device *dev )
 #if DBG
     if( DBG_FLAGS( DbgInfo ) & DBG_PARAM_ON ) {
         DBG_PRINT("  flags: %s%s%s\n",
-            ( dev->flags & IFF_PROMISC ) ? "Promiscous " : "",
+            ( dev->flags & IFF_PROMISC ) ? "Promiscuous " : "",
             ( dev->flags & IFF_MULTICAST ) ? "Multicast " : "",
             ( dev->flags & IFF_ALLMULTI ) ? "All-Multicast" : "" );
 
@@ -1510,8 +1510,11 @@ void wl_wds_device_alloc( struct wl_private *lp )
     for( count = 0; count < NUM_WDS_PORTS; count++ ) {
         struct net_device *dev_wds = NULL;
 
-        dev_wds = kmalloc( sizeof( struct net_device ), GFP_KERNEL );
-        memset( dev_wds, 0, sizeof( struct net_device ));
+	dev_wds = kzalloc(sizeof(struct net_device), GFP_KERNEL);
+	if (!dev_wds) {
+		DBG_LEAVE(DbgInfo);
+		return;
+	}
 
         ether_setup( dev_wds );
 
diff --git a/drivers/staging/wlags49_h2/wl_pci.c b/drivers/staging/wlags49_h2/wl_pci.c
index 3df990c7306a..0b31b01bd490 100644
--- a/drivers/staging/wlags49_h2/wl_pci.c
+++ b/drivers/staging/wlags49_h2/wl_pci.c
@@ -524,6 +524,7 @@ int wl_pci_setup( struct pci_dev *pdev )
     /* Make sure that space was allocated for our private adapter struct */
     if( dev->priv == NULL ) {
         DBG_ERROR( DbgInfo, "Private adapter struct was not allocated!!!\n" );
+	wl_device_dealloc(dev);
         DBG_LEAVE( DbgInfo );
         return -ENOMEM;
     }
@@ -532,6 +533,7 @@ int wl_pci_setup( struct pci_dev *pdev )
     /* Allocate DMA Descriptors */
     if( wl_pci_dma_alloc( pdev, dev->priv ) < 0 ) {
         DBG_ERROR( DbgInfo, "Could not allocate DMA descriptor memory!!!\n" );
+	wl_device_dealloc(dev);
         DBG_LEAVE( DbgInfo );
         return -ENOMEM;
     }
@@ -561,6 +563,8 @@ int wl_pci_setup( struct pci_dev *pdev )
     result = request_irq(dev->irq, wl_isr, SA_SHIRQ, dev->name, dev);
     if( result ) {
         DBG_WARNING( DbgInfo, "Could not register ISR!!!\n" );
+	wl_remove(dev);
+	wl_device_dealloc(dev);
         DBG_LEAVE( DbgInfo );
         return result;
 	}
diff --git a/drivers/staging/wlags49_h2/wl_profile.c b/drivers/staging/wlags49_h2/wl_profile.c
index b8c96cf18de5..0e49272bc7a8 100644
--- a/drivers/staging/wlags49_h2/wl_profile.c
+++ b/drivers/staging/wlags49_h2/wl_profile.c
@@ -401,7 +401,7 @@ void translate_option(char *buffer, struct wl_private *lp)
 		if ((value_convert >= PARM_MIN_BRSC) || (value_convert <= PARM_MAX_BRSC))
 			lp->brsc[0] = value_convert;
 		else
-			DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_BRSC_2GHZ);
+			DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_BRSC_2GHZ);
 	} else if (strcmp(key, PARM_NAME_BRSC_5GHZ) == 0) {
 		DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_BRSC_5GHZ, value);
 
@@ -409,7 +409,7 @@ void translate_option(char *buffer, struct wl_private *lp)
 		if ((value_convert >= PARM_MIN_BRSC) || (value_convert <= PARM_MAX_BRSC))
 			lp->brsc[1] = value_convert;
 		else
-			DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_BRSC_5GHZ);
+			DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_BRSC_5GHZ);
 	} else if ((strcmp(key, PARM_NAME_DESIRED_SSID) == 0) || (strcmp(key, PARM_NAME_OWN_SSID) == 0)) {
 		DBG_TRACE(DbgInfo, "SSID, value: %s\n", value);
 
@@ -556,7 +556,7 @@ void translate_option(char *buffer, struct wl_private *lp)
 		if ((value_convert >= PARM_MIN_SRSC) || (value_convert <= PARM_MAX_SRSC))
 			lp->srsc[0] = value_convert;
 		else
-			DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_SRSC_2GHZ);
+			DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_SRSC_2GHZ);
 	} else if (strcmp(key, PARM_NAME_SRSC_5GHZ) == 0) {
 		DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SRSC_5GHZ, value);
 
@@ -564,7 +564,7 @@ void translate_option(char *buffer, struct wl_private *lp)
 		if ((value_convert >= PARM_MIN_SRSC) || (value_convert <= PARM_MAX_SRSC))
 			lp->srsc[1] = value_convert;
 		else
-			DBG_WARNING(DbgInfo, "%s invaid; will be ignored\n", PARM_NAME_SRSC_5GHZ);
+			DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_SRSC_5GHZ);
 	} else if (strcmp(key, PARM_NAME_SYSTEM_SCALE) == 0) {
 		DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SYSTEM_SCALE, value);
 
diff --git a/drivers/staging/wlags49_h2/wl_util.c b/drivers/staging/wlags49_h2/wl_util.c
index f104e6f1e980..404ec7da0348 100644
--- a/drivers/staging/wlags49_h2/wl_util.c
+++ b/drivers/staging/wlags49_h2/wl_util.c
@@ -98,8 +98,7 @@
  ******************************************************************************/
 
 /* A matrix which maps channels to frequencies */
-#define MAX_CHAN_FREQ_MAP_ENTRIES   50
-static const long chan_freq_list[][MAX_CHAN_FREQ_MAP_ENTRIES] =
+static const long chan_freq_list[][2] =
 {
     {1,2412},
     {2,2417},
@@ -846,7 +845,7 @@ int wl_is_a_valid_chan( int channel )
     }
 
     /* Iterate through the matrix and retrieve the frequency */
-    for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) {
+    for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) {
         if( chan_freq_list[i][0] == channel ) {
             return 1;
         }
@@ -884,7 +883,7 @@ int wl_is_a_valid_freq( long frequency )
 
 
     /* Iterate through the matrix and retrieve the channel */
-    for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) {
+    for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) {
         if( chan_freq_list[i][1] == frequency ) {
             return 1;
         }
@@ -927,7 +926,7 @@ long wl_get_freq_from_chan( int channel )
     }
 
     /* Iterate through the matrix and retrieve the frequency */
-    for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) {
+    for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) {
         if( chan_freq_list[i][0] == channel ) {
             return chan_freq_list[i][1];
         }
@@ -965,7 +964,7 @@ int wl_get_chan_from_freq( long frequency )
 
 
     /* Iterate through the matrix and retrieve the channel */
-    for( i = 0; i < MAX_CHAN_FREQ_MAP_ENTRIES; i++ ) {
+    for( i = 0; i < ARRAY_SIZE(chan_freq_list); i++ ) {
         if( chan_freq_list[i][1] == frequency ) {
             return chan_freq_list[i][0];
         }
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index 4cd3ba5d5646..8bc562b8c4d9 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -332,6 +332,7 @@ int prism2_scan(struct wiphy *wiphy, struct net_device *dev,
 	wlandevice_t *wlandev = dev->ml_priv;
 	struct p80211msg_dot11req_scan msg1;
 	struct p80211msg_dot11req_scan_results msg2;
+	struct cfg80211_bss *bss;
 	int result;
 	int err = 0;
 	int numbss = 0;
@@ -401,7 +402,7 @@ int prism2_scan(struct wiphy *wiphy, struct net_device *dev,
 		ie_buf[1] = msg2.ssid.data.len;
 		ie_len = ie_buf[1] + 2;
 		memcpy(&ie_buf[2], &(msg2.ssid.data.data), msg2.ssid.data.len);
-		cfg80211_inform_bss(wiphy,
+		bss = cfg80211_inform_bss(wiphy,
 			ieee80211_get_channel(wiphy, ieee80211_dsss_chan_to_freq(msg2.dschannel.data)),
 			(const u8 *) &(msg2.bssid.data.data),
 			msg2.timestamp.data, msg2.capinfo.data,
@@ -411,6 +412,13 @@ int prism2_scan(struct wiphy *wiphy, struct net_device *dev,
 			(msg2.signal.data - 65536) * 100, /* Conversion to signed type */
 			GFP_KERNEL
 		);
+
+		if (!bss) {
+			err = -ENOMEM;
+			goto exit;
+		}
+
+		cfg80211_put_bss(bss);
 	}
 
 	if (result)
diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c
index c3bb05dd744f..4efa9bc0fcf0 100644
--- a/drivers/staging/wlan-ng/prism2mgmt.c
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -380,8 +380,8 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 	}
 
 	count = (hw->scanresults->framelen - 3) / 32;
-	if (count > 32)
-		count = 32;
+	if (count > HFA384x_SCANRESULT_MAX)
+		count = HFA384x_SCANRESULT_MAX;
 
 	if (req->bssindex.data >= count) {
 		pr_debug("requested index (%d) out of range (%d)\n",
diff --git a/drivers/staging/xgifb/XGI_main.h b/drivers/staging/xgifb/XGI_main.h
index e828fd403c35..9c62aeb9ede9 100644
--- a/drivers/staging/xgifb/XGI_main.h
+++ b/drivers/staging/xgifb/XGI_main.h
@@ -12,9 +12,6 @@
 
 #define XGIFAIL(x) do { printk(x "\n"); return -EINVAL; } while (0)
 
-#ifndef PCI_DEVICE_ID_XGI_41
-#define PCI_DEVICE_ID_XGI_41      0x041
-#endif
 #ifndef PCI_DEVICE_ID_XGI_42
 #define PCI_DEVICE_ID_XGI_42      0x042
 #endif
@@ -82,177 +79,79 @@ static int XGIfb_tvplug = -1;
 /* TW: For ioctl XGIFB_GET_INFO */
 /* XGIfb_info XGIfbinfo; */
 
-#define MD_XGI300 1
-#define MD_XGI315 2
+#define MD_XGI315 1
 
 /* mode table */
 static const struct _XGIbios_mode {
-	char name[15];
 	u8 mode_no;
 	u16 vesa_mode_no_1;  /* "XGI defined" VESA mode number */
 	u16 vesa_mode_no_2;  /* Real VESA mode numbers */
 	u16 xres;
 	u16 yres;
 	u16 bpp;
-	u16 rate_idx;
-	u16 cols;
-	u16 rows;
 	u8  chipset;
 } XGIbios_mode[] = {
-	{"320x240x16",   0x56, 0x0000, 0x0000,  320,  240, 16, 1,  40, 15,
-	 MD_XGI315},
-	{"320x480x8",    0x5A, 0x0000, 0x0000,  320,  480,  8, 1,  40, 30,
-	 MD_XGI315},  /* TW: FSTN */
-	{"320x480x16",   0x5B, 0x0000, 0x0000,  320,  480, 16, 1,  40, 30,
-	 MD_XGI315},  /* TW: FSTN */
-	{"640x480x8",    0x2E, 0x0101, 0x0101,  640,  480,  8, 1,  80, 30,
-	 MD_XGI300|MD_XGI315},
-	{"640x480x16",   0x44, 0x0111, 0x0111,  640,  480, 16, 1,  80, 30,
-	 MD_XGI300|MD_XGI315},
-	{"640x480x24",   0x62, 0x013a, 0x0112,  640,  480, 32, 1,  80, 30,
-	 MD_XGI300|MD_XGI315},  /* TW: That's for people who mix up color-
-					and fb depth */
-	{"640x480x32",   0x62, 0x013a, 0x0112,  640,  480, 32, 1,  80, 30,
-	 MD_XGI300|MD_XGI315},
-	{"720x480x8",    0x31, 0x0000, 0x0000,  720,  480,  8, 1,  90, 30,
-	 MD_XGI300|MD_XGI315},
-	{"720x480x16",   0x33, 0x0000, 0x0000,  720,  480, 16, 1,  90, 30,
-	 MD_XGI300|MD_XGI315},
-	{"720x480x24",   0x35, 0x0000, 0x0000,  720,  480, 32, 1,  90, 30,
-	 MD_XGI300|MD_XGI315},
-	{"720x480x32",   0x35, 0x0000, 0x0000,  720,  480, 32, 1,  90, 30,
-	 MD_XGI300|MD_XGI315},
-	{"720x576x8",    0x32, 0x0000, 0x0000,  720,  576,  8, 1,  90, 36,
-	 MD_XGI300|MD_XGI315},
-	{"720x576x16",   0x34, 0x0000, 0x0000,  720,  576, 16, 1,  90, 36,
-	 MD_XGI300|MD_XGI315},
-	{"720x576x24",   0x36, 0x0000, 0x0000,  720,  576, 32, 1,  90, 36,
-	 MD_XGI300|MD_XGI315},
-	{"720x576x32",   0x36, 0x0000, 0x0000,  720,  576, 32, 1,  90, 36,
-	 MD_XGI300|MD_XGI315},
-	{"800x480x8",    0x70, 0x0000, 0x0000,  800,  480,  8, 1, 100, 30,
-	 MD_XGI300|MD_XGI315},
-	{"800x480x16",   0x7a, 0x0000, 0x0000,  800,  480, 16, 1, 100, 30,
-	 MD_XGI300|MD_XGI315},
-	{"800x480x24",   0x76, 0x0000, 0x0000,  800,  480, 32, 1, 100, 30,
-	 MD_XGI300|MD_XGI315},
-	{"800x480x32",   0x76, 0x0000, 0x0000,  800,  480, 32, 1, 100, 30,
-	 MD_XGI300|MD_XGI315},
-	{"800x600x8",    0x30, 0x0103, 0x0103,  800,  600,  8, 1, 100, 37,
-	 MD_XGI300|MD_XGI315},
-#define DEFAULT_MODE              20 /* index for 800x600x16 */
-	{"800x600x16",   0x47, 0x0114, 0x0114,  800,  600, 16, 1, 100, 37,
-	 MD_XGI300|MD_XGI315},
-	{"800x600x24",   0x63, 0x013b, 0x0115,  800,  600, 32, 1, 100, 37,
-	 MD_XGI300|MD_XGI315},
-	{"800x600x32",   0x63, 0x013b, 0x0115,  800,  600, 32, 1, 100, 37,
-	 MD_XGI300|MD_XGI315},
-	{"1024x576x8",   0x71, 0x0000, 0x0000, 1024,  576,  8, 1, 128, 36,
-	 MD_XGI300|MD_XGI315},
-	{"1024x576x16",  0x74, 0x0000, 0x0000, 1024,  576, 16, 1, 128, 36,
-	 MD_XGI300|MD_XGI315},
-	{"1024x576x24",  0x77, 0x0000, 0x0000, 1024,  576, 32, 1, 128, 36,
-	 MD_XGI300|MD_XGI315},
-	{"1024x576x32",  0x77, 0x0000, 0x0000, 1024,  576, 32, 1, 128, 36,
-	 MD_XGI300|MD_XGI315},
-	{"1024x600x8",   0x20, 0x0000, 0x0000, 1024,  600,  8, 1, 128, 37,
-	 MD_XGI300          },  /* TW: 300 series only */
-	{"1024x600x16",  0x21, 0x0000, 0x0000, 1024,  600, 16, 1, 128, 37,
-	 MD_XGI300          },
-	{"1024x600x24",  0x22, 0x0000, 0x0000, 1024,  600, 32, 1, 128, 37,
-	 MD_XGI300          },
-	{"1024x600x32",  0x22, 0x0000, 0x0000, 1024,  600, 32, 1, 128, 37,
-	 MD_XGI300          },
-	{"1024x768x8",   0x38, 0x0105, 0x0105, 1024,  768,  8, 1, 128, 48,
-	 MD_XGI300|MD_XGI315},
-	{"1024x768x16",  0x4A, 0x0117, 0x0117, 1024,  768, 16, 1, 128, 48,
-	 MD_XGI300|MD_XGI315},
-	{"1024x768x24",  0x64, 0x013c, 0x0118, 1024,  768, 32, 1, 128, 48,
-	 MD_XGI300|MD_XGI315},
-	{"1024x768x32",  0x64, 0x013c, 0x0118, 1024,  768, 32, 1, 128, 48,
-	 MD_XGI300|MD_XGI315},
-	{"1152x768x8",   0x23, 0x0000, 0x0000, 1152,  768,  8, 1, 144, 48,
-	 MD_XGI300          },  /* TW: 300 series only */
-	{"1152x768x16",  0x24, 0x0000, 0x0000, 1152,  768, 16, 1, 144, 48,
-	 MD_XGI300          },
-	{"1152x768x24",  0x25, 0x0000, 0x0000, 1152,  768, 32, 1, 144, 48,
-	 MD_XGI300          },
-	{"1152x768x32",  0x25, 0x0000, 0x0000, 1152,  768, 32, 1, 144, 48,
-	 MD_XGI300          },
-	{"1280x720x8",   0x79, 0x0000, 0x0000, 1280,  720,  8, 1, 160, 45,
-	 MD_XGI300|MD_XGI315},
-	{"1280x720x16",  0x75, 0x0000, 0x0000, 1280,  720, 16, 1, 160, 45,
-	 MD_XGI300|MD_XGI315},
-	{"1280x720x24",  0x78, 0x0000, 0x0000, 1280,  720, 32, 1, 160, 45,
-	 MD_XGI300|MD_XGI315},
-	{"1280x720x32",  0x78, 0x0000, 0x0000, 1280,  720, 32, 1, 160, 45,
-	 MD_XGI300|MD_XGI315},
-	{"1280x768x8",   0x23, 0x0000, 0x0000, 1280,  768,  8, 1, 160, 48,
-	 MD_XGI315},  /* TW: 310/325 series only */
-	{"1280x768x16",  0x24, 0x0000, 0x0000, 1280,  768, 16, 1, 160, 48,
-	 MD_XGI315},
-	{"1280x768x24",  0x25, 0x0000, 0x0000, 1280,  768, 32, 1, 160, 48,
-	 MD_XGI315},
-	{"1280x768x32",  0x25, 0x0000, 0x0000, 1280,  768, 32, 1, 160, 48,
-	 MD_XGI315},
-	{"1280x960x8",   0x7C, 0x0000, 0x0000, 1280,  960,  8, 1, 160, 60,
-	 MD_XGI300|MD_XGI315},
-	{"1280x960x16",  0x7D, 0x0000, 0x0000, 1280,  960, 16, 1, 160, 60,
-	 MD_XGI300|MD_XGI315},
-	{"1280x960x24",  0x7E, 0x0000, 0x0000, 1280,  960, 32, 1, 160, 60,
-	 MD_XGI300|MD_XGI315},
-	{"1280x960x32",  0x7E, 0x0000, 0x0000, 1280,  960, 32, 1, 160, 60,
-	 MD_XGI300|MD_XGI315},
-	{"1280x1024x8",  0x3A, 0x0107, 0x0107, 1280, 1024,  8, 1, 160, 64,
-	 MD_XGI300|MD_XGI315},
-	{"1280x1024x16", 0x4D, 0x011a, 0x011a, 1280, 1024, 16, 1, 160, 64,
-	 MD_XGI300|MD_XGI315},
-	{"1280x1024x24", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64,
-	 MD_XGI300|MD_XGI315},
-	{"1280x1024x32", 0x65, 0x013d, 0x011b, 1280, 1024, 32, 1, 160, 64,
-	 MD_XGI300|MD_XGI315},
-	{"1400x1050x8",  0x26, 0x0000, 0x0000, 1400, 1050,  8, 1, 175, 65,
-	 MD_XGI315},  /* TW: 310/325 series only */
-	{"1400x1050x16", 0x27, 0x0000, 0x0000, 1400, 1050, 16, 1, 175, 65,
-	 MD_XGI315},
-	{"1400x1050x24", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65,
-	 MD_XGI315},
-	{"1400x1050x32", 0x28, 0x0000, 0x0000, 1400, 1050, 32, 1, 175, 65,
-	 MD_XGI315},
-	{"1600x1200x8",  0x3C, 0x0130, 0x011c, 1600, 1200,  8, 1, 200, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1600x1200x16", 0x3D, 0x0131, 0x011e, 1600, 1200, 16, 1, 200, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1600x1200x24", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1600x1200x32", 0x66, 0x013e, 0x011f, 1600, 1200, 32, 1, 200, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1920x1440x8",  0x68, 0x013f, 0x0000, 1920, 1440,  8, 1, 240, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1920x1440x16", 0x69, 0x0140, 0x0000, 1920, 1440, 16, 1, 240, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1920x1440x24", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75,
-	 MD_XGI300|MD_XGI315},
-	{"1920x1440x32", 0x6B, 0x0141, 0x0000, 1920, 1440, 32, 1, 240, 75,
-	 MD_XGI300|MD_XGI315},
-	{"2048x1536x8",  0x6c, 0x0000, 0x0000, 2048, 1536,  8, 1, 256, 96,
-	 MD_XGI315},  /* TW: 310/325 series only */
-	{"2048x1536x16", 0x6d, 0x0000, 0x0000, 2048, 1536, 16, 1, 256, 96,
-	 MD_XGI315},
-	{"2048x1536x24", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96,
-	 MD_XGI315},
-	{"2048x1536x32", 0x6e, 0x0000, 0x0000, 2048, 1536, 32, 1, 256, 96,
-	 MD_XGI315},
-	{"\0", 0x00, 0, 0, 0, 0, 0, 0, 0}
+	{ 0x56, 0x0000, 0x0000,  320,  240, 16, MD_XGI315 },
+	{ 0x5A, 0x0000, 0x0000,  320,  480,  8, MD_XGI315 },
+	{ 0x5B, 0x0000, 0x0000,  320,  480, 16, MD_XGI315 },
+	{ 0x2E, 0x0101, 0x0101,  640,  480,  8, MD_XGI315 },
+	{ 0x44, 0x0111, 0x0111,  640,  480, 16, MD_XGI315 },
+	{ 0x62, 0x013a, 0x0112,  640,  480, 32, MD_XGI315 },
+	{ 0x31, 0x0000, 0x0000,  720,  480,  8, MD_XGI315 },
+	{ 0x33, 0x0000, 0x0000,  720,  480, 16, MD_XGI315 },
+	{ 0x35, 0x0000, 0x0000,  720,  480, 32, MD_XGI315 },
+	{ 0x32, 0x0000, 0x0000,  720,  576,  8, MD_XGI315 },
+	{ 0x34, 0x0000, 0x0000,  720,  576, 16, MD_XGI315 },
+	{ 0x36, 0x0000, 0x0000,  720,  576, 32, MD_XGI315 },
+	{ 0x36, 0x0000, 0x0000,  720,  576, 32, MD_XGI315 },
+	{ 0x70, 0x0000, 0x0000,  800,  480,  8, MD_XGI315 },
+	{ 0x7a, 0x0000, 0x0000,  800,  480, 16, MD_XGI315 },
+	{ 0x76, 0x0000, 0x0000,  800,  480, 32, MD_XGI315 },
+	{ 0x30, 0x0103, 0x0103,  800,  600,  8, MD_XGI315 },
+#define DEFAULT_MODE              17 /* index for 800x600x16 */
+	{ 0x47, 0x0114, 0x0114,  800,  600, 16, MD_XGI315 },
+	{ 0x63, 0x013b, 0x0115,  800,  600, 32, MD_XGI315 },
+	{ 0x71, 0x0000, 0x0000, 1024,  576,  8, MD_XGI315 },
+	{ 0x74, 0x0000, 0x0000, 1024,  576, 16, MD_XGI315 },
+	{ 0x77, 0x0000, 0x0000, 1024,  576, 32, MD_XGI315 },
+	{ 0x77, 0x0000, 0x0000, 1024,  576, 32, MD_XGI315 },
+	{ 0x20, 0x0000, 0x0000, 1024,  600,  8, },
+	{ 0x21, 0x0000, 0x0000, 1024,  600, 16, },
+	{ 0x22, 0x0000, 0x0000, 1024,  600, 32, },
+	{ 0x38, 0x0105, 0x0105, 1024,  768,  8, MD_XGI315 },
+	{ 0x4A, 0x0117, 0x0117, 1024,  768, 16, MD_XGI315 },
+	{ 0x64, 0x013c, 0x0118, 1024,  768, 32, MD_XGI315 },
+	{ 0x64, 0x013c, 0x0118, 1024,  768, 32, MD_XGI315 },
+	{ 0x23, 0x0000, 0x0000, 1152,  768,  8, },
+	{ 0x24, 0x0000, 0x0000, 1152,  768, 16, },
+	{ 0x25, 0x0000, 0x0000, 1152,  768, 32, },
+	{ 0x79, 0x0000, 0x0000, 1280,  720,  8, MD_XGI315 },
+	{ 0x75, 0x0000, 0x0000, 1280,  720, 16, MD_XGI315 },
+	{ 0x78, 0x0000, 0x0000, 1280,  720, 32, MD_XGI315 },
+	{ 0x23, 0x0000, 0x0000, 1280,  768,  8, MD_XGI315 },
+	{ 0x24, 0x0000, 0x0000, 1280,  768, 16, MD_XGI315 },
+	{ 0x25, 0x0000, 0x0000, 1280,  768, 32, MD_XGI315 },
+	{ 0x7C, 0x0000, 0x0000, 1280,  960,  8, MD_XGI315 },
+	{ 0x7D, 0x0000, 0x0000, 1280,  960, 16, MD_XGI315 },
+	{ 0x7E, 0x0000, 0x0000, 1280,  960, 32, MD_XGI315 },
+	{ 0x3A, 0x0107, 0x0107, 1280, 1024,  8, MD_XGI315 },
+	{ 0x4D, 0x011a, 0x011a, 1280, 1024, 16, MD_XGI315 },
+	{ 0x65, 0x013d, 0x011b, 1280, 1024, 32, MD_XGI315 },
+	{ 0x26, 0x0000, 0x0000, 1400, 1050,  8, MD_XGI315 },
+	{ 0x27, 0x0000, 0x0000, 1400, 1050, 16, MD_XGI315 },
+	{ 0x28, 0x0000, 0x0000, 1400, 1050, 32, MD_XGI315 },
+	{ 0x3C, 0x0130, 0x011c, 1600, 1200,  8, MD_XGI315 },
+	{ 0x3D, 0x0131, 0x011e, 1600, 1200, 16, MD_XGI315 },
+	{ 0x66, 0x013e, 0x011f, 1600, 1200, 32, MD_XGI315 },
+	{ 0x68, 0x013f, 0x0000, 1920, 1440,  8, MD_XGI315 },
+	{ 0x69, 0x0140, 0x0000, 1920, 1440, 16, MD_XGI315 },
+	{ 0x6B, 0x0141, 0x0000, 1920, 1440, 32, MD_XGI315 },
+	{ 0x6c, 0x0000, 0x0000, 2048, 1536,  8, MD_XGI315 },
+	{ 0x6d, 0x0000, 0x0000, 2048, 1536, 16, MD_XGI315 },
+	{ 0x6e, 0x0000, 0x0000, 2048, 1536, 32, MD_XGI315 },
+	{ 0 },
 };
 
-/* TW: CR36 evaluation */
-static const unsigned short XGI300paneltype[] = {
-	 LCD_UNKNOWN,  LCD_800x600, LCD_1024x768, LCD_1280x1024,
-	LCD_1280x960,  LCD_640x480, LCD_1024x600, LCD_1152x768,
-	LCD_1024x768, LCD_1024x768, LCD_1024x768,
-	LCD_1024x768, LCD_1024x768, LCD_1024x768, LCD_1024x768};
-
 static const unsigned short XGI310paneltype[] = {
 	 LCD_UNKNOWN,   LCD_800x600, LCD_1024x768, LCD_1280x1024,
 	 LCD_640x480,  LCD_1024x600, LCD_1152x864, LCD_1280x960,
diff --git a/drivers/staging/xgifb/XGI_main_26.c b/drivers/staging/xgifb/XGI_main_26.c
index 21c037827de4..85dbf32b1f66 100644
--- a/drivers/staging/xgifb/XGI_main_26.c
+++ b/drivers/staging/xgifb/XGI_main_26.c
@@ -156,25 +156,14 @@ static int XGIfb_mode_rate_to_dclock(struct vb_device_info *XGI_Pr,
 	unsigned short ModeNo = modeno;
 	unsigned short ModeIdIndex = 0, ClockIndex = 0;
 	unsigned short RefreshRateTableIndex = 0;
-
-	/* unsigned long  temp = 0; */
 	int Clock;
 	InitTo330Pointer(HwDeviceExtension->jChipType, XGI_Pr);
 
+	XGI_SearchModeID(ModeNo, &ModeIdIndex, XGI_Pr);
+
 	RefreshRateTableIndex = XGI_GetRatePtrCRT2(HwDeviceExtension, ModeNo,
 			ModeIdIndex, XGI_Pr);
 
-	/*
-	temp = XGI_SearchModeID(ModeNo , &ModeIdIndex,  XGI_Pr) ;
-	if (!temp) {
-		printk(KERN_ERR "Could not find mode %x\n", ModeNo);
-		return 65000;
-	}
-
-	RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex;
-	RefreshRateTableIndex += (rateindex - 1);
-
-	*/
 	ClockIndex = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
 
 	Clock = XGI_Pr->VCLKData[ClockIndex].CLOCK * 1000;
@@ -190,7 +179,7 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr,
 		u32 *vmode)
 {
 	unsigned short ModeNo = modeno;
-	unsigned short ModeIdIndex = 0, index = 0;
+	unsigned short ModeIdIndex, index = 0;
 	unsigned short RefreshRateTableIndex = 0;
 
 	unsigned short VRE, VBE, VRS, VBS, VDE, VT;
@@ -199,16 +188,10 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr,
 	unsigned long cr_data3;
 	int A, B, C, D, E, F, temp, j;
 	InitTo330Pointer(HwDeviceExtension->jChipType, XGI_Pr);
+	if (!XGI_SearchModeID(ModeNo, &ModeIdIndex, XGI_Pr))
+		return 0;
 	RefreshRateTableIndex = XGI_GetRatePtrCRT2(HwDeviceExtension, ModeNo,
 			ModeIdIndex, XGI_Pr);
-	/*
-	temp = XGI_SearchModeID(ModeNo, &ModeIdIndex, XGI_Pr);
-	if (!temp)
-		return 0;
-
-	RefreshRateTableIndex = XGI_Pr->EModeIDTable[ModeIdIndex].REFindex;
-	RefreshRateTableIndex += (rateindex - 1);
-	*/
 	index = XGI_Pr->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
 
 	sr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[5];
@@ -219,12 +202,6 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr,
 	HT = (cr_data & 0xff) | ((unsigned short) (sr_data & 0x03) << 8);
 	A = HT + 5;
 
-	/*
-	cr_data = XGI_Pr->XGINEWUB_CRT1Table[index].CR[1];
-
-	Horizontal display enable end
-	HDE = (cr_data & 0xff) | ((unsigned short) (sr_data & 0x0C) << 6);
-	*/
 	HDE = (XGI_Pr->RefIndex[RefreshRateTableIndex].XRes >> 3) - 1;
 	E = HDE + 1;
 
@@ -358,7 +335,6 @@ static int XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr,
 
 static void XGIRegInit(struct vb_device_info *XGI_Pr, unsigned long BaseAddr)
 {
-	XGI_Pr->RelIO = BaseAddr;
 	XGI_Pr->P3c4 = BaseAddr + 0x14;
 	XGI_Pr->P3d4 = BaseAddr + 0x24;
 	XGI_Pr->P3c0 = BaseAddr + 0x10;
@@ -414,19 +390,26 @@ static int XGIfb_GetXG21DefaultLVDSModeIdx(struct xgifb_video_info *xgifb_info)
 static void XGIfb_search_mode(struct xgifb_video_info *xgifb_info,
 			      const char *name)
 {
-	int i = 0, j = 0, l;
+	unsigned int xres;
+	unsigned int yres;
+	unsigned int bpp;
+	int i;
 
-	while (XGIbios_mode[i].mode_no != 0) {
-		l = min(strlen(name), strlen(XGIbios_mode[i].name));
-		if (!strncmp(name, XGIbios_mode[i].name, l)) {
+	if (sscanf(name, "%ux%ux%u", &xres, &yres, &bpp) != 3)
+		goto invalid_mode;
+
+	if (bpp == 24)
+		bpp = 32; /* That's for people who mix up color and fb depth. */
+
+	for (i = 0; XGIbios_mode[i].mode_no != 0; i++)
+		if (XGIbios_mode[i].xres == xres &&
+		    XGIbios_mode[i].yres == yres &&
+		    XGIbios_mode[i].bpp == bpp) {
 			xgifb_info->mode_idx = i;
-			j = 1;
-			break;
+			return;
 		}
-		i++;
-	}
-	if (!j)
-		pr_info("Invalid mode '%s'\n", name);
+invalid_mode:
+	pr_info("Invalid mode '%s'\n", name);
 }
 
 static void XGIfb_search_vesamode(struct xgifb_video_info *xgifb_info,
@@ -1088,7 +1071,7 @@ static int XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
 	unsigned int vtotal = var->upper_margin + var->yres + var->lower_margin
 			+ var->vsync_len;
 #if defined(__powerpc__)
-	u8 sr_data, cr_data;
+	u8 cr_data;
 #endif
 	unsigned int drate = 0, hrate = 0;
 	int found_mode = 0;
@@ -1162,8 +1145,7 @@ static int XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
 
 	if (XGIfb_search_refresh_rate(xgifb_info,
 				      xgifb_info->refresh_rate) == 0) {
-		xgifb_info->rate_idx =
-			XGIbios_mode[xgifb_info->mode_idx].rate_idx;
+		xgifb_info->rate_idx = 1;
 		xgifb_info->refresh_rate = 60;
 	}
 
@@ -1680,17 +1662,6 @@ static int XGIfb_get_dram_size(struct xgifb_video_info *xgifb_info)
 			ChannelNum = 1;
 		break;
 
-	case XG45:
-		if (tmp == 1)
-			ChannelNum = 2;
-		else if (tmp == 2)
-			ChannelNum = 3;
-		else if (tmp == 3)
-			ChannelNum = 4;
-		else
-			ChannelNum = 1;
-		break;
-
 	case XG40:
 	default:
 		if (tmp == 2)
@@ -1911,11 +1882,9 @@ static int __devinit xgifb_probe(struct pci_dev *pdev,
 	xgifb_info->mmio_base = pci_resource_start(pdev, 1);
 	xgifb_info->mmio_size = pci_resource_len(pdev, 1);
 	xgifb_info->vga_base = pci_resource_start(pdev, 2) + 0x30;
-	hw_info->pjIOAddress = (unsigned char *)xgifb_info->vga_base;
-	/* XGI_Pr.RelIO  = ioremap(pci_resource_start(pdev, 2), 128) + 0x30; */
-	pr_info("Relocate IO address: %lx [%08lx]\n",
-	       (unsigned long)pci_resource_start(pdev, 2),
-	       xgifb_info->dev_info.RelIO);
+	pr_info("Relocate IO address: %Lx [%08lx]\n",
+	       (u64) pci_resource_start(pdev, 2),
+	       xgifb_info->vga_base);
 
 	if (pci_enable_device(pdev)) {
 		ret = -EIO;
@@ -1927,7 +1896,7 @@ static int __devinit xgifb_probe(struct pci_dev *pdev,
 		xgifb_info->display2_force = true;
 	}
 
-	XGIRegInit(&xgifb_info->dev_info, (unsigned long)hw_info->pjIOAddress);
+	XGIRegInit(&xgifb_info->dev_info, xgifb_info->vga_base);
 
 	xgifb_reg_set(XGISR, IND_SIS_PASSWORD, SIS_PASSWORD);
 	reg1 = xgifb_reg_get(XGISR, IND_SIS_PASSWORD);
@@ -1950,9 +1919,6 @@ static int __devinit xgifb_probe(struct pci_dev *pdev,
 	case PCI_DEVICE_ID_XGI_40:
 		xgifb_info->chip = XG40;
 		break;
-	case PCI_DEVICE_ID_XGI_41:
-		xgifb_info->chip = XG41;
-		break;
 	case PCI_DEVICE_ID_XGI_42:
 		xgifb_info->chip = XG42;
 		break;
@@ -2006,13 +1972,13 @@ static int __devinit xgifb_probe(struct pci_dev *pdev,
 	xgifb_info->mmio_vbase = ioremap(xgifb_info->mmio_base,
 					    xgifb_info->mmio_size);
 
-	pr_info("Framebuffer at 0x%lx, mapped to 0x%p, size %dk\n",
-	       xgifb_info->video_base,
+	pr_info("Framebuffer at 0x%Lx, mapped to 0x%p, size %dk\n",
+	       (u64) xgifb_info->video_base,
 	       xgifb_info->video_vbase,
 	       xgifb_info->video_size / 1024);
 
-	pr_info("MMIO at 0x%lx, mapped to 0x%p, size %ldk\n",
-	       xgifb_info->mmio_base, xgifb_info->mmio_vbase,
+	pr_info("MMIO at 0x%Lx, mapped to 0x%p, size %ldk\n",
+	       (u64) xgifb_info->mmio_base, xgifb_info->mmio_vbase,
 	       xgifb_info->mmio_size / 1024);
 
 	pci_set_drvdata(pdev, xgifb_info);
@@ -2174,8 +2140,7 @@ static int __devinit xgifb_probe(struct pci_dev *pdev,
 		xgifb_info->refresh_rate = 60;
 	if (XGIfb_search_refresh_rate(xgifb_info,
 			xgifb_info->refresh_rate) == 0) {
-		xgifb_info->rate_idx =
-			XGIbios_mode[xgifb_info->mode_idx].rate_idx;
+		xgifb_info->rate_idx = 1;
 		xgifb_info->refresh_rate = 60;
 	}
 
diff --git a/drivers/staging/xgifb/XGIfb.h b/drivers/staging/xgifb/XGIfb.h
index 37bb730de047..9068c5ad76ec 100644
--- a/drivers/staging/xgifb/XGIfb.h
+++ b/drivers/staging/xgifb/XGIfb.h
@@ -23,9 +23,7 @@ enum xgifb_display_type {
 
 enum XGI_CHIP_TYPE {
 	XG40 = 32,
-	XG41,
 	XG42,
-	XG45,
 	XG20 = 48,
 	XG21,
 	XG27,
@@ -66,9 +64,9 @@ struct xgifb_video_info {
 
 	int           chip_id;
 	unsigned int  video_size;
-	unsigned long video_base;
+	phys_addr_t   video_base;
 	void __iomem *video_vbase;
-	unsigned long mmio_base;
+	phys_addr_t   mmio_base;
 	unsigned long mmio_size;
 	void __iomem *mmio_vbase;
 	unsigned long vga_base;
diff --git a/drivers/staging/xgifb/vb_init.c b/drivers/staging/xgifb/vb_init.c
index 3650bbff7686..c222d611431d 100644
--- a/drivers/staging/xgifb/vb_init.c
+++ b/drivers/staging/xgifb/vb_init.c
@@ -353,7 +353,6 @@ static void XGINew_DDR1x_DefaultRegister(
 		XGINew_SetMemoryClock(HwDeviceExtension, pVBInfo);
 
 		switch (HwDeviceExtension->jChipType) {
-		case XG41:
 		case XG42:
 			/* CR82 */
 			xgifb_reg_set(P3d4,
@@ -556,8 +555,7 @@ static void XGINew_SetDRAMDefaultRegister340(
 		xgifb_reg_set(P3d4, (0x8A + j),
 				pVBInfo->CR40[1 + j][pVBInfo->ram_type]);
 
-	if ((HwDeviceExtension->jChipType == XG41) ||
-	    (HwDeviceExtension->jChipType == XG42))
+	if (HwDeviceExtension->jChipType == XG42)
 		xgifb_reg_set(P3d4, 0x8C, 0x87);
 
 	xgifb_reg_set(P3d4,
@@ -854,78 +852,6 @@ static void XGINew_CheckChannel(struct xgi_hw_device_info *HwDeviceExtension,
 		pVBInfo->ram_channel = 1; /* Single channel */
 		xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x51); /* 32Mx16 bit*/
 		break;
-	case XG41:
-		if (XGINew_CheckFrequence(pVBInfo) == 1) {
-			pVBInfo->ram_bus = 32; /* 32 bits */
-			pVBInfo->ram_channel = 3; /* Quad Channel */
-			xgifb_reg_set(pVBInfo->P3c4, 0x13, 0xA1);
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x4C);
-
-			if (XGINew_ReadWriteRest(25, 23, pVBInfo) == 1)
-				return;
-
-			pVBInfo->ram_channel = 2; /* Dual channels */
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x48);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x49);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			pVBInfo->ram_channel = 3;
-			xgifb_reg_set(pVBInfo->P3c4, 0x13, 0x21);
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x3C);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x38);
-
-			if (XGINew_ReadWriteRest(8, 4, pVBInfo) == 1)
-				return;
-			else
-				xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x39);
-		} else { /* DDR */
-			pVBInfo->ram_bus = 64; /* 64 bits */
-			pVBInfo->ram_channel = 2; /* Dual channels */
-			xgifb_reg_set(pVBInfo->P3c4, 0x13, 0xA1);
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x5A);
-
-			if (XGINew_ReadWriteRest(25, 24, pVBInfo) == 1)
-				return;
-
-			pVBInfo->ram_channel = 1; /* Single channels */
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x52);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x53);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			pVBInfo->ram_channel = 2; /* Dual channels */
-			xgifb_reg_set(pVBInfo->P3c4, 0x13, 0x21);
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x4A);
-
-			if (XGINew_ReadWriteRest(24, 23, pVBInfo) == 1)
-				return;
-
-			pVBInfo->ram_channel = 1; /* Single channels */
-			xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x42);
-
-			if (XGINew_ReadWriteRest(8, 4, pVBInfo) == 1)
-				return;
-			else
-				xgifb_reg_set(pVBInfo->P3c4, 0x14, 0x43);
-		}
-
-		break;
-
 	case XG42:
 		/*
 		 XG42 SR14 D[3] Reserve
@@ -1478,7 +1404,7 @@ unsigned char XGIInitNew(struct pci_dev *pdev)
 
 	pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress;
 
-	pVBInfo->BaseAddr = (unsigned long) HwDeviceExtension->pjIOAddress;
+	pVBInfo->BaseAddr = xgifb_info->vga_base;
 
 	/* Newdebugcode(0x99); */
 
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
index 60d4adf99923..b2f4338b1109 100644
--- a/drivers/staging/xgifb/vb_setmode.c
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -16,36 +16,6 @@
 
 #define  IndexMask 0xff
 
-static const unsigned short XGINew_MDA_DAC[] = {
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-	0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-	0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F};
-
-static const unsigned short XGINew_CGA_DAC[] = {
-	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
-	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
-	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
-	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
-	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
-	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
-	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
-	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F};
-
-static const unsigned short XGINew_EGA_DAC[] = {
-	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x05, 0x15,
-	0x20, 0x30, 0x24, 0x34, 0x21, 0x31, 0x25, 0x35,
-	0x08, 0x18, 0x0C, 0x1C, 0x09, 0x19, 0x0D, 0x1D,
-	0x28, 0x38, 0x2C, 0x3C, 0x29, 0x39, 0x2D, 0x3D,
-	0x02, 0x12, 0x06, 0x16, 0x03, 0x13, 0x07, 0x17,
-	0x22, 0x32, 0x26, 0x36, 0x23, 0x33, 0x27, 0x37,
-	0x0A, 0x1A, 0x0E, 0x1E, 0x0B, 0x1B, 0x0F, 0x1F,
-	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F};
-
 static const unsigned short XGINew_VGA_DAC[] = {
 	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
 	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
@@ -60,8 +30,7 @@ static const unsigned short XGINew_VGA_DAC[] = {
 
 void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo)
 {
-	pVBInfo->SModeIDTable = (struct XGI_StStruct *) XGI330_SModeIDTable;
-	pVBInfo->StandTable = (struct SiS_StandTable_S *) XGI330_StandTable;
+	pVBInfo->StandTable = (struct SiS_StandTable_S *) &XGI330_StandTable;
 	pVBInfo->EModeIDTable = (struct XGI_ExtStruct *) XGI330_EModeIDTable;
 	pVBInfo->RefIndex = (struct XGI_Ext2Struct *) XGI330_RefIndex;
 	pVBInfo->XGINEWUB_CRT1Table
@@ -182,38 +151,17 @@ void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo)
 
 }
 
-static unsigned char XGI_GetModePtr(unsigned short ModeNo,
-				    unsigned short ModeIdIndex,
-				    struct vb_device_info *pVBInfo)
-{
-	unsigned char index;
-
-	if (ModeNo <= 0x13)
-		index = pVBInfo->SModeIDTable[ModeIdIndex].St_StTableIndex;
-	else {
-		if (pVBInfo->ModeType <= 0x02)
-			index = 0x1B; /* 02 -> ModeEGA */
-		else
-			index = 0x0F;
-	}
-	return index; /* Get pVBInfo->StandTable index */
-}
-
 static void XGI_SetSeqRegs(unsigned short ModeNo,
-			   unsigned short StandTableIndex,
 			   unsigned short ModeIdIndex,
 			   struct vb_device_info *pVBInfo)
 {
 	unsigned char tempah, SRdata;
 	unsigned short i, modeflag;
 
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	xgifb_reg_set(pVBInfo->P3c4, 0x00, 0x03); /* Set SR0 */
-	tempah = pVBInfo->StandTable[StandTableIndex].SR[0];
+	tempah = pVBInfo->StandTable->SR[0];
 
 	i = XGI_SetCRT2ToLCDA;
 	if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) {
@@ -230,13 +178,12 @@ static void XGI_SetSeqRegs(unsigned short ModeNo,
 
 	for (i = 02; i <= 04; i++) {
 		/* Get SR2,3,4 from file */
-		SRdata = pVBInfo->StandTable[StandTableIndex].SR[i - 1];
+		SRdata = pVBInfo->StandTable->SR[i - 1];
 		xgifb_reg_set(pVBInfo->P3c4, i, SRdata); /* Set SR2 3 4 */
 	}
 }
 
 static void XGI_SetCRTCRegs(struct xgi_hw_device_info *HwDeviceExtension,
-			    unsigned short StandTableIndex,
 			    struct vb_device_info *pVBInfo)
 {
 	unsigned char CRTCdata;
@@ -248,26 +195,22 @@ static void XGI_SetCRTCRegs(struct xgi_hw_device_info *HwDeviceExtension,
 
 	for (i = 0; i <= 0x18; i++) {
 		/* Get CRTC from file */
-		CRTCdata = pVBInfo->StandTable[StandTableIndex].CRTC[i];
+		CRTCdata = pVBInfo->StandTable->CRTC[i];
 		xgifb_reg_set(pVBInfo->P3d4, i, CRTCdata); /* Set CRTC(3d4) */
 	}
 }
 
 static void XGI_SetATTRegs(unsigned short ModeNo,
-			   unsigned short StandTableIndex,
 			   unsigned short ModeIdIndex,
 			   struct vb_device_info *pVBInfo)
 {
 	unsigned char ARdata;
 	unsigned short i, modeflag;
 
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	for (i = 0; i <= 0x13; i++) {
-		ARdata = pVBInfo->StandTable[StandTableIndex].ATTR[i];
+		ARdata = pVBInfo->StandTable->ATTR[i];
 		if (modeflag & Charx8Dot) { /* ifndef Dot9 */
 			if (i == 0x13) {
 				if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) {
@@ -295,15 +238,14 @@ static void XGI_SetATTRegs(unsigned short ModeNo,
 	outb(0x20, pVBInfo->P3c0);
 }
 
-static void XGI_SetGRCRegs(unsigned short StandTableIndex,
-			   struct vb_device_info *pVBInfo)
+static void XGI_SetGRCRegs(struct vb_device_info *pVBInfo)
 {
 	unsigned char GRdata;
 	unsigned short i;
 
 	for (i = 0; i <= 0x08; i++) {
 		/* Get GR from file */
-		GRdata = pVBInfo->StandTable[StandTableIndex].GRC[i];
+		GRdata = pVBInfo->StandTable->GRC[i];
 		xgifb_reg_set(pVBInfo->P3ce, i, GRdata); /* Set GR(3ce) */
 	}
 
@@ -344,12 +286,7 @@ static unsigned char XGI_AjustCRT2Rate(unsigned short ModeNo,
 {
 	unsigned short tempax, tempbx, resinfo, modeflag, infoflag;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ModeFlag */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 	tempbx = pVBInfo->RefIndex[RefreshRateTableIndex + (*i)].ModeID;
 	tempax = 0;
@@ -584,11 +521,7 @@ static void XGI_SetCRT1Timing_V(unsigned short ModeIdIndex,
 	data &= 0x80;
 	data = data >> 2;
 
-	if (ModeNo <= 0x13)
-		i = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		i = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
+	i = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	i &= DoubleScanMode;
 	if (i)
 		data |= 0x80;
@@ -641,158 +574,97 @@ static void XGI_SetXG21CRTC(unsigned short ModeNo, unsigned short ModeIdIndex,
 		unsigned short RefreshRateTableIndex,
 		struct vb_device_info *pVBInfo)
 {
-	unsigned char StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx;
+	unsigned char index, Tempax, Tempbx, Tempcx, Tempdx;
 	unsigned short Temp1, Temp2, Temp3;
 
-	if (ModeNo <= 0x13) {
-		StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo);
-		/* CR04 HRS */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[4];
-		/* SR2E [7:0]->HRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
-		/* Tempbx: CR05 HRE */
-		Tempbx = pVBInfo->StandTable[StandTableIndex].CRTC[5];
-		Tempbx &= 0x1F; /* Tempbx: HRE[4:0] */
-		Tempcx = Tempax;
-		Tempcx &= 0xE0; /* Tempcx: HRS[7:5] */
-		Tempdx = Tempcx | Tempbx; /* Tempdx(HRE): HRS[7:5]HRE[4:0] */
-		if (Tempbx < (Tempax & 0x1F)) /* IF HRE < HRS */
-			Tempdx |= 0x20; /* Tempdx: HRE = HRE + 0x20 */
-		Tempdx <<= 2; /* Tempdx << 2 */
-		/* SR2F [7:2]->HRE */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempdx);
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
-
-		/* Tempax: CR16 VRS */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[16];
-		Tempbx = Tempax; /* Tempbx=Tempax */
-		Tempax &= 0x01; /* Tempax: VRS[0] */
-		xgifb_reg_or(pVBInfo->P3c4, 0x33, Tempax); /* SR33[0]->VRS */
-
-		/* Tempax: CR7 VRS */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[7];
-		Tempdx = Tempbx >> 1; /* Tempdx: VRS[7:1] */
-		Tempcx = Tempax & 0x04; /* Tempcx: CR7[2] */
-		Tempcx <<= 5; /* Tempcx[7]: VRS[8] */
-		Tempdx |= Tempcx; /* Tempdx: VRS[8:1] */
-		/* SR34[7:0]: VRS[8:1] */
-		xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempdx);
-
-		/* Temp1[8]: VRS[8] unsigned char -> unsigned short */
-		Temp1 = Tempcx << 1;
-		Temp1 |= Tempbx; /* Temp1[8:0]: VRS[8:0] */
-		Tempax &= 0x80; /* Tempax[7]: CR7[7] */
-		Temp2 = Tempax << 2; /* Temp2[9]: VRS[9] */
-		Temp1 |= Temp2; /* Temp1[9:0]: VRS[9:0] */
-
-		/* CR16 VRE */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[17];
-		Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
-		Temp2 = Temp1 & 0x3F0; /* Temp2[9:4]: VRS[9:4] */
-		Temp2 |= Tempax; /* Temp2[9:0]: VRE[9:0] */
-		Temp3 = Temp1 & 0x0F; /* Temp3[3:0]: VRS[3:0] */
-		if (Tempax < Temp3) /* VRE[3:0]<VRS[3:0] */
-			Temp2 |= 0x10; /* Temp2: VRE + 0x10 */
-		Temp2 &= 0xFF; /* Temp2[7:0]: VRE[7:0] */
-		Tempax = (unsigned char) Temp2; /* Tempax[7:0]: VRE[7:0] */
-		Tempax <<= 2; /* Tempax << 2: VRE[5:0] */
-		Temp1 &= 0x600; /* Temp1[10:9]: VRS[10:9] */
-		Temp1 >>= 9; /* [10:9]->[1:0] */
-		Tempbx = (unsigned char) Temp1; /* Tempbx[1:0]: VRS[10:9] */
-		Tempax |= Tempbx; /* VRE[5:0]VRS[10:9] */
-		Tempax &= 0x7F;
-		/* SR3F D[7:2]->VRE D[1:0]->VRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x3F, Tempax);
-	} else {
-		index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
-		/* Tempax: CR4 HRS */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
-		Tempcx = Tempax; /* Tempcx: HRS */
-		/* SR2E[7:0]->HRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
-
-		Tempdx = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SRB */
-		Tempdx &= 0xC0; /* Tempdx[7:6]: SRB[7:6] */
-		Temp1 = Tempdx; /* Temp1[7:6]: HRS[9:8] */
-		Temp1 <<= 2; /* Temp1[9:8]: HRS[9:8] */
-		Temp1 |= Tempax; /* Temp1[9:0]: HRS[9:0] */
-
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */
-		Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */
-
-		Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */
-		Tempbx &= 0x04; /* Tempbx[2]: HRE[5] */
-		Tempbx <<= 3; /* Tempbx[5]: HRE[5] */
-		Tempax |= Tempbx; /* Tempax[5:0]: HRE[5:0] */
-
-		Temp2 = Temp1 & 0x3C0; /* Temp2[9:6]: HRS[9:6] */
-		Temp2 |= Tempax; /* Temp2[9:0]: HRE[9:0] */
-
-		Tempcx &= 0x3F; /* Tempcx[5:0]: HRS[5:0] */
-		if (Tempax < Tempcx) /* HRE < HRS */
-			Temp2 |= 0x40; /* Temp2 + 0x40 */
-
-		Temp2 &= 0xFF;
-		Tempax = (unsigned char) Temp2; /* Tempax: HRE[7:0] */
-		Tempax <<= 2; /* Tempax[7:2]: HRE[5:0] */
-		Tempdx >>= 6; /* Tempdx[7:6]->[1:0] HRS[9:8] */
-		Tempax |= Tempdx; /* HRE[5:0]HRS[9:8] */
-		/* SR2F D[7:2]->HRE, D[1:0]->HRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax);
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
-
-		/* CR10 VRS */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10];
-		Tempbx = Tempax; /* Tempbx: VRS */
-		Tempax &= 0x01; /* Tempax[0]: VRS[0] */
-		xgifb_reg_or(pVBInfo->P3c4, 0x33, Tempax); /* SR33[0]->VRS[0] */
-		/* CR7[2][7] VRE */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9];
-		Tempcx = Tempbx >> 1; /* Tempcx[6:0]: VRS[7:1] */
-		Tempdx = Tempax & 0x04; /* Tempdx[2]: CR7[2] */
-		Tempdx <<= 5; /* Tempdx[7]: VRS[8] */
-		Tempcx |= Tempdx; /* Tempcx[7:0]: VRS[8:1] */
-		xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempcx); /* SR34[8:1]->VRS */
-
-		Temp1 = Tempdx; /* Temp1[7]: Tempdx[7] */
-		Temp1 <<= 1; /* Temp1[8]: VRS[8] */
-		Temp1 |= Tempbx; /* Temp1[8:0]: VRS[8:0] */
-		Tempax &= 0x80;
-		Temp2 = Tempax << 2; /* Temp2[9]: VRS[9] */
-		Temp1 |= Temp2; /* Temp1[9:0]: VRS[9:0] */
-		/* Tempax: SRA */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
-		Tempax &= 0x08; /* Tempax[3]: VRS[3] */
-		Temp2 = Tempax;
-		Temp2 <<= 7; /* Temp2[10]: VRS[10] */
-		Temp1 |= Temp2; /* Temp1[10:0]: VRS[10:0] */
-
-		/* Tempax: CR11 VRE */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11];
-		Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
-		/* Tempbx: SRA */
-		Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
-		Tempbx &= 0x20; /* Tempbx[5]: VRE[5] */
-		Tempbx >>= 1; /* Tempbx[4]: VRE[4] */
-		Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */
-		Temp2 = Temp1 & 0x7E0; /* Temp2[10:5]: VRS[10:5] */
-		Temp2 |= Tempax; /* Temp2[10:5]: VRE[10:5] */
-
-		Temp3 = Temp1 & 0x1F; /* Temp3[4:0]: VRS[4:0] */
-		if (Tempax < Temp3) /* VRE < VRS */
-			Temp2 |= 0x20; /* VRE + 0x20 */
-
-		Temp2 &= 0xFF;
-		Tempax = (unsigned char) Temp2; /* Tempax: VRE[7:0] */
-		Tempax <<= 2; /* Tempax[7:0]; VRE[5:0]00 */
-		Temp1 &= 0x600; /* Temp1[10:9]: VRS[10:9] */
-		Temp1 >>= 9; /* Temp1[1:0]: VRS[10:9] */
-		Tempbx = (unsigned char) Temp1;
-		Tempax |= Tempbx; /* Tempax[7:0]: VRE[5:0]VRS[10:9] */
-		Tempax &= 0x7F;
-		/* SR3F D[7:2]->VRE D[1:0]->VRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x3F, Tempax);
-	}
+	index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	/* Tempax: CR4 HRS */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
+	Tempcx = Tempax; /* Tempcx: HRS */
+	/* SR2E[7:0]->HRS */
+	xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
+
+	Tempdx = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SRB */
+	Tempdx &= 0xC0; /* Tempdx[7:6]: SRB[7:6] */
+	Temp1 = Tempdx; /* Temp1[7:6]: HRS[9:8] */
+	Temp1 <<= 2; /* Temp1[9:8]: HRS[9:8] */
+	Temp1 |= Tempax; /* Temp1[9:0]: HRS[9:0] */
+
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */
+	Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */
+
+	Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */
+	Tempbx &= 0x04; /* Tempbx[2]: HRE[5] */
+	Tempbx <<= 3; /* Tempbx[5]: HRE[5] */
+	Tempax |= Tempbx; /* Tempax[5:0]: HRE[5:0] */
+
+	Temp2 = Temp1 & 0x3C0; /* Temp2[9:6]: HRS[9:6] */
+	Temp2 |= Tempax; /* Temp2[9:0]: HRE[9:0] */
+
+	Tempcx &= 0x3F; /* Tempcx[5:0]: HRS[5:0] */
+	if (Tempax < Tempcx) /* HRE < HRS */
+		Temp2 |= 0x40; /* Temp2 + 0x40 */
+
+	Temp2 &= 0xFF;
+	Tempax = (unsigned char) Temp2; /* Tempax: HRE[7:0] */
+	Tempax <<= 2; /* Tempax[7:2]: HRE[5:0] */
+	Tempdx >>= 6; /* Tempdx[7:6]->[1:0] HRS[9:8] */
+	Tempax |= Tempdx; /* HRE[5:0]HRS[9:8] */
+	/* SR2F D[7:2]->HRE, D[1:0]->HRS */
+	xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax);
+	xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
+
+	/* CR10 VRS */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10];
+	Tempbx = Tempax; /* Tempbx: VRS */
+	Tempax &= 0x01; /* Tempax[0]: VRS[0] */
+	xgifb_reg_or(pVBInfo->P3c4, 0x33, Tempax); /* SR33[0]->VRS[0] */
+	/* CR7[2][7] VRE */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9];
+	Tempcx = Tempbx >> 1; /* Tempcx[6:0]: VRS[7:1] */
+	Tempdx = Tempax & 0x04; /* Tempdx[2]: CR7[2] */
+	Tempdx <<= 5; /* Tempdx[7]: VRS[8] */
+	Tempcx |= Tempdx; /* Tempcx[7:0]: VRS[8:1] */
+	xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempcx); /* SR34[8:1]->VRS */
+
+	Temp1 = Tempdx; /* Temp1[7]: Tempdx[7] */
+	Temp1 <<= 1; /* Temp1[8]: VRS[8] */
+	Temp1 |= Tempbx; /* Temp1[8:0]: VRS[8:0] */
+	Tempax &= 0x80;
+	Temp2 = Tempax << 2; /* Temp2[9]: VRS[9] */
+	Temp1 |= Temp2; /* Temp1[9:0]: VRS[9:0] */
+	/* Tempax: SRA */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+	Tempax &= 0x08; /* Tempax[3]: VRS[3] */
+	Temp2 = Tempax;
+	Temp2 <<= 7; /* Temp2[10]: VRS[10] */
+	Temp1 |= Temp2; /* Temp1[10:0]: VRS[10:0] */
+
+	/* Tempax: CR11 VRE */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11];
+	Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
+	/* Tempbx: SRA */
+	Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+	Tempbx &= 0x20; /* Tempbx[5]: VRE[5] */
+	Tempbx >>= 1; /* Tempbx[4]: VRE[4] */
+	Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */
+	Temp2 = Temp1 & 0x7E0; /* Temp2[10:5]: VRS[10:5] */
+	Temp2 |= Tempax; /* Temp2[10:5]: VRE[10:5] */
+
+	Temp3 = Temp1 & 0x1F; /* Temp3[4:0]: VRS[4:0] */
+	if (Tempax < Temp3) /* VRE < VRS */
+		Temp2 |= 0x20; /* VRE + 0x20 */
+
+	Temp2 &= 0xFF;
+	Tempax = (unsigned char) Temp2; /* Tempax: VRE[7:0] */
+	Tempax <<= 2; /* Tempax[7:0]; VRE[5:0]00 */
+	Temp1 &= 0x600; /* Temp1[10:9]: VRS[10:9] */
+	Temp1 >>= 9; /* Temp1[1:0]: VRS[10:9] */
+	Tempbx = (unsigned char) Temp1;
+	Tempax |= Tempbx; /* Tempax[7:0]: VRE[5:0]VRS[10:9] */
+	Tempax &= 0x7F;
+	/* SR3F D[7:2]->VRE D[1:0]->VRS */
+	xgifb_reg_set(pVBInfo->P3c4, 0x3F, Tempax);
 }
 
 static void XGI_SetXG27CRTC(unsigned short ModeNo,
@@ -800,139 +672,88 @@ static void XGI_SetXG27CRTC(unsigned short ModeNo,
 			    unsigned short RefreshRateTableIndex,
 			    struct vb_device_info *pVBInfo)
 {
-	unsigned short StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx;
-
-	if (ModeNo <= 0x13) {
-		StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo);
-		/* CR04 HRS */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[4];
-		/* SR2E [7:0]->HRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
-		/* Tempbx: CR05 HRE */
-		Tempbx = pVBInfo->StandTable[StandTableIndex].CRTC[5];
-		Tempbx &= 0x1F; /* Tempbx: HRE[4:0] */
-		Tempcx = Tempax;
-		Tempcx &= 0xE0; /* Tempcx: HRS[7:5] */
-		Tempdx = Tempcx | Tempbx; /* Tempdx(HRE): HRS[7:5]HRE[4:0] */
-		if (Tempbx < (Tempax & 0x1F)) /* IF HRE < HRS */
-			Tempdx |= 0x20; /* Tempdx: HRE = HRE + 0x20 */
-		Tempdx <<= 2; /* Tempdx << 2 */
-		/* SR2F [7:2]->HRE */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempdx);
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
-
-		/* Tempax: CR10 VRS */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[16];
-		xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempax); /* SR34[7:0]->VRS */
-		Tempcx = Tempax; /* Tempcx=Tempax=VRS[7:0] */
-		/* Tempax[7][2]: CR7[7][2] VRS[9][8] */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[7];
-		Tempbx = Tempax; /* Tempbx=CR07 */
-		Tempax &= 0x04; /* Tempax[2]: CR07[2] VRS[8] */
-		Tempax >>= 2;
-		/* SR35 D[0]->VRS D[8] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x01, Tempax);
-		Tempcx |= (Tempax << 8); /* Tempcx[8] |= VRS[8] */
-		Tempcx |= (Tempbx & 0x80) << 2; /* Tempcx[9] |= VRS[9] */
-
-		/* CR11 VRE */
-		Tempax = pVBInfo->StandTable[StandTableIndex].CRTC[17];
-		Tempax &= 0x0F; /* Tempax: VRE[3:0] */
-		Tempbx = Tempcx; /* Tempbx=Tempcx=VRS[9:0] */
-		Tempbx &= 0x3F0; /* Tempbx[9:4]: VRS[9:4] */
-		Tempbx |= Tempax; /* Tempbx[9:0]: VRE[9:0] */
-		if (Tempax <= (Tempcx & 0x0F)) /* VRE[3:0]<=VRS[3:0] */
-			Tempbx |= 0x10; /* Tempbx: VRE + 0x10 */
-		/* Tempax[7:0]: VRE[7:0] */
-		Tempax = (unsigned char) Tempbx & 0xFF;
-		Tempax <<= 2; /* Tempax << 2: VRE[5:0] */
-		Tempcx = (Tempcx & 0x600) >> 8; /* Tempcx VRS[10:9] */
-		/* SR3F D[7:2]->VRE D[5:0] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x3F, ~0xFC, Tempax);
-		/* SR35 D[2:1]->VRS[10:9] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x06, Tempcx);
-	} else {
-		index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
-		/* Tempax: CR4 HRS */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
-		Tempbx = Tempax; /* Tempbx: HRS[7:0] */
-		/* SR2E[7:0]->HRS */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
-
-		/* SR0B */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5];
-		Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
-		Tempbx |= (Tempax << 2); /* Tempbx: HRS[9:0] */
-
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */
-		Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */
-		Tempcx = Tempax; /* Tempcx: HRE[4:0] */
-
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */
-		Tempax &= 0x04; /* Tempax[2]: HRE[5] */
-		Tempax <<= 3; /* Tempax[5]: HRE[5] */
-		Tempcx |= Tempax; /* Tempcx[5:0]: HRE[5:0] */
-
-		Tempbx = Tempbx & 0x3C0; /* Tempbx[9:6]: HRS[9:6] */
-		Tempbx |= Tempcx; /* Tempbx: HRS[9:6]HRE[5:0] */
-
-		/* Tempax: CR4 HRS */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
-		Tempax &= 0x3F; /* Tempax: HRS[5:0] */
-		if (Tempcx <= Tempax) /* HRE[5:0] < HRS[5:0] */
-			Tempbx += 0x40; /* Tempbx= Tempbx + 0x40 : HRE[9:0]*/
-
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SR0B */
-		Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
-		Tempax >>= 6; /* Tempax[1:0]: HRS[9:8]*/
-		Tempax |= ((Tempbx << 2) & 0xFF); /* Tempax[7:2]: HRE[5:0] */
-		/* SR2F [7:2][1:0]: HRE[5:0]HRS[9:8] */
-		xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax);
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
-
-		/* CR10 VRS */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10];
-		/* SR34[7:0]->VRS[7:0] */
-		xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempax);
-
-		Tempcx = Tempax; /* Tempcx <= VRS[7:0] */
-		/* CR7[7][2] VRS[9][8] */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9];
-		Tempbx = Tempax; /* Tempbx <= CR07[7:0] */
-		Tempax = Tempax & 0x04; /* Tempax[2]: CR7[2]: VRS[8] */
-		Tempax >>= 2; /* Tempax[0]: VRS[8] */
-		/* SR35[0]: VRS[8] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x01, Tempax);
-		Tempcx |= (Tempax << 8); /* Tempcx <= VRS[8:0] */
-		Tempcx |= ((Tempbx & 0x80) << 2); /* Tempcx <= VRS[9:0] */
-		/* Tempax: SR0A */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
-		Tempax &= 0x08; /* SR0A[3] VRS[10] */
-		Tempcx |= (Tempax << 7); /* Tempcx <= VRS[10:0] */
-
-		/* Tempax: CR11 VRE */
-		Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11];
-		Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
-		/* Tempbx: SR0A */
-		Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
-		Tempbx &= 0x20; /* Tempbx[5]: SR0A[5]: VRE[4] */
-		Tempbx >>= 1; /* Tempbx[4]: VRE[4] */
-		Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */
-		Tempbx = Tempcx; /* Tempbx: VRS[10:0] */
-		Tempbx &= 0x7E0; /* Tempbx[10:5]: VRS[10:5] */
-		Tempbx |= Tempax; /* Tempbx: VRS[10:5]VRE[4:0] */
-
-		if (Tempbx <= Tempcx) /* VRE <= VRS */
-			Tempbx |= 0x20; /* VRE + 0x20 */
-
-		/* Tempax: Tempax[7:0]; VRE[5:0]00 */
-		Tempax = (Tempbx << 2) & 0xFF;
-		/* SR3F[7:2]:VRE[5:0] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x3F, ~0xFC, Tempax);
-		Tempax = Tempcx >> 8;
-		/* SR35[2:0]:VRS[10:8] */
-		xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x07, Tempax);
-	}
+	unsigned short index, Tempax, Tempbx, Tempcx;
+
+	index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	/* Tempax: CR4 HRS */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
+	Tempbx = Tempax; /* Tempbx: HRS[7:0] */
+	/* SR2E[7:0]->HRS */
+	xgifb_reg_set(pVBInfo->P3c4, 0x2E, Tempax);
+
+	/* SR0B */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5];
+	Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
+	Tempbx |= (Tempax << 2); /* Tempbx: HRS[9:0] */
+
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[4]; /* CR5 HRE */
+	Tempax &= 0x1F; /* Tempax[4:0]: HRE[4:0] */
+	Tempcx = Tempax; /* Tempcx: HRE[4:0] */
+
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[6]; /* SRC */
+	Tempax &= 0x04; /* Tempax[2]: HRE[5] */
+	Tempax <<= 3; /* Tempax[5]: HRE[5] */
+	Tempcx |= Tempax; /* Tempcx[5:0]: HRE[5:0] */
+
+	Tempbx = Tempbx & 0x3C0; /* Tempbx[9:6]: HRS[9:6] */
+	Tempbx |= Tempcx; /* Tempbx: HRS[9:6]HRE[5:0] */
+
+	/* Tempax: CR4 HRS */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[3];
+	Tempax &= 0x3F; /* Tempax: HRS[5:0] */
+	if (Tempcx <= Tempax) /* HRE[5:0] < HRS[5:0] */
+		Tempbx += 0x40; /* Tempbx= Tempbx + 0x40 : HRE[9:0]*/
+
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[5]; /* SR0B */
+	Tempax &= 0xC0; /* Tempax[7:6]: SR0B[7:6]: HRS[9:8]*/
+	Tempax >>= 6; /* Tempax[1:0]: HRS[9:8]*/
+	Tempax |= ((Tempbx << 2) & 0xFF); /* Tempax[7:2]: HRE[5:0] */
+	/* SR2F [7:2][1:0]: HRE[5:0]HRS[9:8] */
+	xgifb_reg_set(pVBInfo->P3c4, 0x2F, Tempax);
+	xgifb_reg_and_or(pVBInfo->P3c4, 0x30, 0xE3, 00);
+
+	/* CR10 VRS */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[10];
+	/* SR34[7:0]->VRS[7:0] */
+	xgifb_reg_set(pVBInfo->P3c4, 0x34, Tempax);
+
+	Tempcx = Tempax; /* Tempcx <= VRS[7:0] */
+	/* CR7[7][2] VRS[9][8] */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[9];
+	Tempbx = Tempax; /* Tempbx <= CR07[7:0] */
+	Tempax = Tempax & 0x04; /* Tempax[2]: CR7[2]: VRS[8] */
+	Tempax >>= 2; /* Tempax[0]: VRS[8] */
+	/* SR35[0]: VRS[8] */
+	xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x01, Tempax);
+	Tempcx |= (Tempax << 8); /* Tempcx <= VRS[8:0] */
+	Tempcx |= ((Tempbx & 0x80) << 2); /* Tempcx <= VRS[9:0] */
+	/* Tempax: SR0A */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+	Tempax &= 0x08; /* SR0A[3] VRS[10] */
+	Tempcx |= (Tempax << 7); /* Tempcx <= VRS[10:0] */
+
+	/* Tempax: CR11 VRE */
+	Tempax = pVBInfo->XGINEWUB_CRT1Table[index].CR[11];
+	Tempax &= 0x0F; /* Tempax[3:0]: VRE[3:0] */
+	/* Tempbx: SR0A */
+	Tempbx = pVBInfo->XGINEWUB_CRT1Table[index].CR[14];
+	Tempbx &= 0x20; /* Tempbx[5]: SR0A[5]: VRE[4] */
+	Tempbx >>= 1; /* Tempbx[4]: VRE[4] */
+	Tempax |= Tempbx; /* Tempax[4:0]: VRE[4:0] */
+	Tempbx = Tempcx; /* Tempbx: VRS[10:0] */
+	Tempbx &= 0x7E0; /* Tempbx[10:5]: VRS[10:5] */
+	Tempbx |= Tempax; /* Tempbx: VRS[10:5]VRE[4:0] */
+
+	if (Tempbx <= Tempcx) /* VRE <= VRS */
+		Tempbx |= 0x20; /* VRE + 0x20 */
+
+	/* Tempax: Tempax[7:0]; VRE[5:0]00 */
+	Tempax = (Tempbx << 2) & 0xFF;
+	/* SR3F[7:2]:VRE[5:0] */
+	xgifb_reg_and_or(pVBInfo->P3c4, 0x3F, ~0xFC, Tempax);
+	Tempax = Tempcx >> 8;
+	/* SR35[2:0]:VRS[10:8] */
+	xgifb_reg_and_or(pVBInfo->P3c4, 0x35, ~0x07, Tempax);
 }
 
 static void XGI_SetXG27FPBits(struct vb_device_info *pVBInfo)
@@ -954,7 +775,7 @@ static void xgifb_set_lcd(int chip_id,
 			  unsigned short RefreshRateTableIndex,
 			  unsigned short ModeNo)
 {
-	unsigned short Data, Temp, b3CC;
+	unsigned short Data, Temp;
 	unsigned short XGI_P3cc;
 
 	XGI_P3cc = pVBInfo->P3cc;
@@ -995,23 +816,13 @@ static void xgifb_set_lcd(int chip_id,
 	xgifb_reg_and(pVBInfo->P3c4, 0x30, ~0x20); /* Hsync polarity */
 	xgifb_reg_and(pVBInfo->P3c4, 0x35, ~0x80); /* Vsync polarity */
 
-	if (ModeNo <= 0x13) {
-		b3CC = (unsigned char) inb(XGI_P3cc);
-		if (b3CC & 0x40)
-			/* Hsync polarity */
-			xgifb_reg_or(pVBInfo->P3c4, 0x30, 0x20);
-		if (b3CC & 0x80)
-			/* Vsync polarity */
-			xgifb_reg_or(pVBInfo->P3c4, 0x35, 0x80);
-	} else {
-		Data = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
-		if (Data & 0x4000)
-			/* Hsync polarity */
-			xgifb_reg_or(pVBInfo->P3c4, 0x30, 0x20);
-		if (Data & 0x8000)
-			/* Vsync polarity */
-			xgifb_reg_or(pVBInfo->P3c4, 0x35, 0x80);
-	}
+	Data = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+	if (Data & 0x4000)
+		/* Hsync polarity */
+		xgifb_reg_or(pVBInfo->P3c4, 0x30, 0x20);
+	if (Data & 0x8000)
+		/* Vsync polarity */
+		xgifb_reg_or(pVBInfo->P3c4, 0x35, 0x80);
 }
 
 /* --------------------------------------------------------------------- */
@@ -1024,30 +835,22 @@ static void XGI_UpdateXG21CRTC(unsigned short ModeNo,
 			       struct vb_device_info *pVBInfo,
 			       unsigned short RefreshRateTableIndex)
 {
-	int i, index = -1;
+	int index = -1;
 
 	xgifb_reg_and(pVBInfo->P3d4, 0x11, 0x7F); /* Unlock CR0~7 */
-	if (ModeNo <= 0x13) {
-		for (i = 0; i < 12; i++) {
-			if (ModeNo == pVBInfo->UpdateCRT1[i].ModeID)
-				index = i;
-		}
-	} else {
-		if (ModeNo == 0x2E &&
-		    (pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC ==
-							      RES640x480x60))
-			index = 12;
-		else if (ModeNo == 0x2E &&
-			 (pVBInfo->RefIndex[RefreshRateTableIndex].
+	if (ModeNo == 0x2E &&
+	    (pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC ==
+						      RES640x480x60))
+		index = 12;
+	else if (ModeNo == 0x2E && (pVBInfo->RefIndex[RefreshRateTableIndex].
 				Ext_CRT1CRTC == RES640x480x72))
-			index = 13;
-		else if (ModeNo == 0x2F)
-			index = 14;
-		else if (ModeNo == 0x50)
-			index = 15;
-		else if (ModeNo == 0x59)
-			index = 16;
-	}
+		index = 13;
+	else if (ModeNo == 0x2F)
+		index = 14;
+	else if (ModeNo == 0x50)
+		index = 15;
+	else if (ModeNo == 0x59)
+		index = 16;
 
 	if (index != -1) {
 		xgifb_reg_set(pVBInfo->P3d4, 0x02,
@@ -1061,20 +864,6 @@ static void XGI_UpdateXG21CRTC(unsigned short ModeNo,
 	}
 }
 
-static unsigned short XGI_GetResInfo(unsigned short ModeNo,
-		unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
-{
-	unsigned short resindex;
-
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		resindex = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	else
-		/* si+Ext_ResInfo */
-		resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-	return resindex;
-}
-
 static void XGI_SetCRT1DE(struct xgi_hw_device_info *HwDeviceExtension,
 		unsigned short ModeNo, unsigned short ModeIdIndex,
 		unsigned short RefreshRateTableIndex,
@@ -1084,33 +873,25 @@ static void XGI_SetCRT1DE(struct xgi_hw_device_info *HwDeviceExtension,
 
 	unsigned char data;
 
-	resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo);
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 
-	if (ModeNo <= 0x13) {
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		tempax = pVBInfo->StResInfo[resindex].HTotal;
-		tempbx = pVBInfo->StResInfo[resindex].VTotal;
-	} else {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		tempax = pVBInfo->ModeResInfo[resindex].HTotal;
-		tempbx = pVBInfo->ModeResInfo[resindex].VTotal;
-	}
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	tempax = pVBInfo->ModeResInfo[resindex].HTotal;
+	tempbx = pVBInfo->ModeResInfo[resindex].VTotal;
 
 	if (modeflag & HalfDCLK)
 		tempax = tempax >> 1;
 
-	if (ModeNo > 0x13) {
-		if (modeflag & HalfDCLK)
-			tempax = tempax << 1;
+	if (modeflag & HalfDCLK)
+		tempax = tempax << 1;
 
-		temp = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+	temp = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
 
-		if (temp & InterlaceMode)
-			tempbx = tempbx >> 1;
+	if (temp & InterlaceMode)
+		tempbx = tempbx >> 1;
 
-		if (modeflag & DoubleScanMode)
-			tempbx = tempbx << 1;
-	}
+	if (modeflag & DoubleScanMode)
+		tempbx = tempbx << 1;
 
 	tempcx = 8;
 
@@ -1258,18 +1039,10 @@ static unsigned short XGI_GetVCLK2Ptr(unsigned short ModeNo,
 	unsigned short CRT2Index, VCLKIndex;
 	unsigned short modeflag, resinfo;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-		CRT2Index = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-	} else {
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-		CRT2Index = pVBInfo->RefIndex[RefreshRateTableIndex].
-				Ext_CRT2CRTC;
-	}
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	CRT2Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 
 	if (pVBInfo->IF_DEF_LVDS == 0) {
 		CRT2Index = CRT2Index >> 6; /*  for LCD */
@@ -1318,23 +1091,13 @@ static unsigned short XGI_GetVCLK2Ptr(unsigned short ModeNo,
 				VCLKIndex += 25;
 			}
 		} else { /* for CRT2 */
-			/* Port 3cch */
-			VCLKIndex = (unsigned char) inb((pVBInfo->P3ca + 0x02));
-			VCLKIndex = ((VCLKIndex >> 2) & 0x03);
-			if (ModeNo > 0x13) {
-				/* di+Ext_CRTVCLK */
-				VCLKIndex = pVBInfo->RefIndex[
-							RefreshRateTableIndex].
+			/* di+Ext_CRTVCLK */
+			VCLKIndex = pVBInfo->RefIndex[RefreshRateTableIndex].
 								Ext_CRTVCLK;
-				VCLKIndex &= IndexMask;
-			}
+			VCLKIndex &= IndexMask;
 		}
 	} else { /* LVDS */
-		if (ModeNo <= 0x13)
-			VCLKIndex = CRT2Index;
-		else
-			VCLKIndex = CRT2Index;
-
+		VCLKIndex = CRT2Index;
 		VCLKIndex = VCLKIndex >> 6;
 		if ((pVBInfo->LCDResInfo == Panel_800x600) ||
 		    (pVBInfo->LCDResInfo == Panel_320x480))
@@ -1431,27 +1194,13 @@ static void XGI_SetCRT1FIFO(unsigned short ModeNo,
 	data &= 0xfe;
 	xgifb_reg_set(pVBInfo->P3c4, 0x3D, data); /* diable auto-threshold */
 
-	if (ModeNo > 0x13) {
-		xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x34);
-		data = xgifb_reg_get(pVBInfo->P3c4, 0x09);
-		data &= 0xC0;
-		xgifb_reg_set(pVBInfo->P3c4, 0x09, data | 0x30);
-		data = xgifb_reg_get(pVBInfo->P3c4, 0x3D);
-		data |= 0x01;
-		xgifb_reg_set(pVBInfo->P3c4, 0x3D, data);
-	} else {
-		if (HwDeviceExtension->jChipType == XG27) {
-			xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x0E);
-			data = xgifb_reg_get(pVBInfo->P3c4, 0x09);
-			data &= 0xC0;
-			xgifb_reg_set(pVBInfo->P3c4, 0x09, data | 0x20);
-		} else {
-			xgifb_reg_set(pVBInfo->P3c4, 0x08, 0xAE);
-			data = xgifb_reg_get(pVBInfo->P3c4, 0x09);
-			data &= 0xF0;
-			xgifb_reg_set(pVBInfo->P3c4, 0x09, data);
-		}
-	}
+	xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x34);
+	data = xgifb_reg_get(pVBInfo->P3c4, 0x09);
+	data &= 0xC0;
+	xgifb_reg_set(pVBInfo->P3c4, 0x09, data | 0x30);
+	data = xgifb_reg_get(pVBInfo->P3c4, 0x3D);
+	data |= 0x01;
+	xgifb_reg_set(pVBInfo->P3c4, 0x3D, data);
 
 	if (HwDeviceExtension->jChipType == XG21)
 		XGI_SetXG21FPBits(pVBInfo); /* Fix SR9[7:6] can't read back */
@@ -1466,13 +1215,9 @@ static void XGI_SetVCLKState(struct xgi_hw_device_info *HwDeviceExtension,
 
 	unsigned char index;
 
-	if (ModeNo <= 0x13)
-		VCLK = 0;
-	else {
-		index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
-		index &= IndexMask;
-		VCLK = pVBInfo->VCLKData[index].CLOCK;
-	}
+	index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
+	index &= IndexMask;
+	VCLK = pVBInfo->VCLKData[index].CLOCK;
 
 	data = xgifb_reg_get(pVBInfo->P3c4, 0x32);
 	data &= 0xf3;
@@ -1508,44 +1253,26 @@ static void XGI_SetCRT1ModeRegs(struct xgi_hw_device_info *HwDeviceExtension,
 	unsigned short data, data2, data3, infoflag = 0, modeflag, resindex,
 			xres;
 
-	if (ModeNo > 0x13) {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		infoflag = pVBInfo->RefIndex[RefreshRateTableIndex].
-				Ext_InfoFlag;
-	} else
-		/* si+St_ModeFlag */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	infoflag = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
 
 	if (xgifb_reg_get(pVBInfo->P3d4, 0x31) & 0x01)
 		xgifb_reg_and_or(pVBInfo->P3c4, 0x1F, 0x3F, 0x00);
 
-	if (ModeNo > 0x13)
-		data = infoflag;
-	else
-		data = 0;
-
+	data = infoflag;
 	data2 = 0;
-
-	if (ModeNo > 0x13) {
-		if (pVBInfo->ModeType > 0x02) {
-			data2 |= 0x02;
-			data3 = pVBInfo->ModeType - ModeVGA;
-			data3 = data3 << 2;
-			data2 |= data3;
-		}
-	}
-
+	data2 |= 0x02;
+	data3 = pVBInfo->ModeType - ModeVGA;
+	data3 = data3 << 2;
+	data2 |= data3;
 	data &= InterlaceMode;
 
 	if (data)
 		data2 |= 0x20;
 
 	xgifb_reg_and_or(pVBInfo->P3c4, 0x06, ~0x3F, data2);
-	resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo);
-	if (ModeNo <= 0x13)
-		xres = pVBInfo->StResInfo[resindex].HTotal;
-	else
-		xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
 
 	data = 0x0000;
 	if (infoflag & InterlaceMode) {
@@ -1568,18 +1295,10 @@ static void XGI_SetCRT1ModeRegs(struct xgi_hw_device_info *HwDeviceExtension,
 	if (modeflag & LineCompareOff)
 		data2 |= 0x08;
 
-	if (ModeNo > 0x13) {
-		if (pVBInfo->ModeType == ModeEGA)
-			data2 |= 0x40;
-	}
-
 	xgifb_reg_and_or(pVBInfo->P3c4, 0x0F, ~0x48, data2);
 	data = 0x60;
-	if (pVBInfo->ModeType != ModeText) {
-		data = data ^ 0x60;
-		if (pVBInfo->ModeType != ModeEGA)
-			data = data ^ 0xA0;
-	}
+	data = data ^ 0x60;
+	data = data ^ 0xA0;
 	xgifb_reg_and_or(pVBInfo->P3c4, 0x21, 0x1F, data);
 
 	XGI_SetVCLKState(HwDeviceExtension, ModeNo, RefreshRateTableIndex,
@@ -1644,38 +1363,13 @@ static void XGI_WriteDAC(unsigned short dl,
 static void XGI_LoadDAC(unsigned short ModeNo, unsigned short ModeIdIndex,
 		struct vb_device_info *pVBInfo)
 {
-	unsigned short data, data2, time, i, j, k, m, n, o, si, di, bx, dl, al,
-			ah, dh;
-	const unsigned short *table = NULL;
-
-	if (ModeNo <= 0x13)
-		data = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		data = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
-	data &= DACInfoFlag;
-	time = 64;
-
-	if (data == 0x00)
-		table = XGINew_MDA_DAC;
-	else if (data == 0x08)
-		table = XGINew_CGA_DAC;
-	else if (data == 0x10)
-		table = XGINew_EGA_DAC;
-	else if (data == 0x18) {
-		time = 256;
-		table = XGINew_VGA_DAC;
-	}
-
-	if (time == 256)
-		j = 16;
-	else
-		j = time;
+	unsigned short data, data2, i, k, m, n, o, si, di, bx, dl, al, ah, dh;
+	const unsigned short *table = XGINew_VGA_DAC;
 
 	outb(0xFF, pVBInfo->P3c6);
 	outb(0x00, pVBInfo->P3c8);
 
-	for (i = 0; i < j; i++) {
+	for (i = 0; i < 16; i++) {
 		data = table[i];
 
 		for (k = 0; k < 3; k++) {
@@ -1692,45 +1386,43 @@ static void XGI_LoadDAC(unsigned short ModeNo, unsigned short ModeIdIndex,
 		}
 	}
 
-	if (time == 256) {
-		for (i = 16; i < 32; i++) {
-			data = table[i];
-
-			for (k = 0; k < 3; k++)
-				outb(data, pVBInfo->P3c9);
-		}
+	for (i = 16; i < 32; i++) {
+		data = table[i];
 
-		si = 32;
+		for (k = 0; k < 3; k++)
+			outb(data, pVBInfo->P3c9);
+	}
 
-		for (m = 0; m < 9; m++) {
-			di = si;
-			bx = si + 0x04;
-			dl = 0;
+	si = 32;
 
-			for (n = 0; n < 3; n++) {
-				for (o = 0; o < 5; o++) {
-					dh = table[si];
-					ah = table[di];
-					al = table[bx];
-					si++;
-					XGI_WriteDAC(dl, ah, al, dh, pVBInfo);
-				}
+	for (m = 0; m < 9; m++) {
+		di = si;
+		bx = si + 0x04;
+		dl = 0;
 
-				si -= 2;
+		for (n = 0; n < 3; n++) {
+			for (o = 0; o < 5; o++) {
+				dh = table[si];
+				ah = table[di];
+				al = table[bx];
+				si++;
+				XGI_WriteDAC(dl, ah, al, dh, pVBInfo);
+			}
 
-				for (o = 0; o < 3; o++) {
-					dh = table[bx];
-					ah = table[di];
-					al = table[si];
-					si--;
-					XGI_WriteDAC(dl, ah, al, dh, pVBInfo);
-				}
+			si -= 2;
 
-				dl++;
+			for (o = 0; o < 3; o++) {
+				dh = table[bx];
+				ah = table[di];
+				al = table[si];
+				si--;
+				XGI_WriteDAC(dl, ah, al, dh, pVBInfo);
 			}
 
-			si += 5;
+			dl++;
 		}
+
+		si += 5;
 	}
 }
 
@@ -1740,34 +1432,20 @@ static void XGI_GetLVDSResInfo(unsigned short ModeNo,
 {
 	unsigned short resindex, xres, yres, modeflag;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	else
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		resindex = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	else
-		/* si+Ext_ResInfo */
-		resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	/* si+Ext_ResInfo */
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 
-	if (ModeNo <= 0x13) {
-		xres = pVBInfo->StResInfo[resindex].HTotal;
-		yres = pVBInfo->StResInfo[resindex].VTotal;
-	} else {
-		xres = pVBInfo->ModeResInfo[resindex].HTotal;
-		yres = pVBInfo->ModeResInfo[resindex].VTotal;
-	}
-	if (ModeNo > 0x13) {
-		if (modeflag & HalfDCLK)
-			xres = xres << 1;
+	xres = pVBInfo->ModeResInfo[resindex].HTotal;
+	yres = pVBInfo->ModeResInfo[resindex].VTotal;
 
-		if (modeflag & DoubleScanMode)
-			yres = yres << 1;
-	}
+	if (modeflag & HalfDCLK)
+		xres = xres << 1;
+
+	if (modeflag & DoubleScanMode)
+		yres = yres << 1;
 
 	if (xres == 720)
 		xres = 640;
@@ -1789,32 +1467,16 @@ static void *XGI_GetLcdPtr(unsigned short BX, unsigned short ModeNo,
 
 	tempbx = BX;
 
-	if (ModeNo <= 0x13) {
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-	} else {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
-	}
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 
 	tempal = tempal & 0x0f;
 
 	if (tempbx <= 1) { /* ExpLink */
-		if (ModeNo <= 0x13) {
-			/* find no Ext_CRT2CRTC2 */
-			tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-		} else {
-			tempal = pVBInfo->RefIndex[RefreshRateTableIndex].
-					Ext_CRT2CRTC;
-		}
+		tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 
 		if (pVBInfo->VBInfo & XGI_SetCRT2ToLCDA) {
-			if (ModeNo <= 0x13)
-				tempal = pVBInfo->SModeIDTable[ModeIdIndex].
-						St_CRT2CRTC2;
-			else
-				tempal = pVBInfo->RefIndex[
-						RefreshRateTableIndex].
+			tempal = pVBInfo->RefIndex[RefreshRateTableIndex].
 							Ext_CRT2CRTC2;
 		}
 
@@ -1882,9 +1544,6 @@ static void *XGI_GetLcdPtr(unsigned short BX, unsigned short ModeNo,
 			tempbx = tempdi[i].MASK;
 			tempdx = pVBInfo->LCDInfo;
 
-			if (ModeNo <= 0x13) /* alan 09/10/2003 */
-				tempdx |= SetLCDStdMode;
-
 			if (modeflag & HalfDCLK)
 				tempdx |= SetLCDLowResolution;
 
@@ -2238,15 +1897,8 @@ static void *XGI_GetTVPtr(unsigned short BX, unsigned short ModeNo,
 	struct XGI330_TVDataTablStruct *tempdi = NULL;
 
 	tempbx = BX;
-
-	if (ModeNo <= 0x13) {
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		tempal = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-	} else {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
-	}
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 	tempal = tempal & 0x3f;
 	table = tempbx;
 
@@ -2413,11 +2065,7 @@ static void XGI_ModCRT1Regs(unsigned short ModeNo, unsigned short ModeIdIndex,
 	struct XGI_LVDSCRT1HDataStruct *LCDPtr = NULL;
 	struct XGI_LVDSCRT1VDataStruct *LCDPtr1 = NULL;
 
-	if (ModeNo <= 0x13)
-		index = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-	else
-		index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
-
+	index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 	index = index & IndexMask;
 
 	tempbx = 0;
@@ -2530,14 +2178,10 @@ static void XGI_SetLVDSRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 {
 	unsigned short tempbx, tempax, tempcx, tempdx, push1, push2, modeflag;
 	unsigned long temp, temp1, temp2, temp3, push3;
-	struct XGI330_LCDDataDesStruct *LCDPtr = NULL;
+	struct XGI_LCDDesStruct *LCDPtr = NULL;
 	struct XGI330_LCDDataDesStruct2 *LCDPtr1 = NULL;
 
-	if (ModeNo > 0x13)
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-	else
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	tempbx = 3;
 	if (pVBInfo->LCDInfo & EnableScalingLCD)
 		LCDPtr1 =
@@ -2550,7 +2194,7 @@ static void XGI_SetLVDSRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 					  pVBInfo);
 	else
 		LCDPtr =
-		    (struct XGI330_LCDDataDesStruct *)
+		    (struct XGI_LCDDesStruct *)
 				XGI_GetLcdPtr(
 					  tempbx,
 					  ModeNo,
@@ -2829,12 +2473,8 @@ static unsigned char XGI_GetVCLKPtr(unsigned short RefreshRateTableIndex,
 	unsigned short index, modeflag;
 	unsigned char tempal;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	if ((pVBInfo->SetFlag & ProgrammingCRT2) &&
 	    (!(pVBInfo->LCDInfo & EnableScalingLCD))) { /* {LCDA/LCDB} */
@@ -2895,9 +2535,6 @@ static unsigned char XGI_GetVCLKPtr(unsigned short RefreshRateTableIndex,
 	if ((pVBInfo->LCDInfo & EnableScalingLCD) && (modeflag & Charx8Dot))
 		tempal = tempal ^ tempal; /* ; set to VCLK25MHz always */
 
-	if (ModeNo <= 0x13)
-		return tempal;
-
 	tempal = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRTVCLK;
 	return tempal;
 }
@@ -3079,11 +2716,7 @@ static void XGI_GetVBInfo(unsigned short ModeNo, unsigned short ModeIdIndex,
 {
 	unsigned short tempax, push, tempbx, temp, modeflag;
 
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	pVBInfo->SetFlag = 0;
 	pVBInfo->ModeType = modeflag & ModeTypeMask;
 	tempbx = 0;
@@ -3283,17 +2916,8 @@ static void XGI_GetTVInfo(unsigned short ModeNo, unsigned short ModeIdIndex,
 	resinfo = 0;
 
 	if (pVBInfo->VBInfo & SetCRT2ToTV) {
-		if (ModeNo <= 0x13) {
-			modeflag = pVBInfo->SModeIDTable[ModeIdIndex].
-					St_ModeFlag; /* si+St_ModeFlag */
-			resinfo = pVBInfo->SModeIDTable[ModeIdIndex].
-					St_ResInfo; /* si+St_ResInfo */
-		} else {
-			modeflag = pVBInfo->EModeIDTable[ModeIdIndex].
-					Ext_ModeFlag;
-			resinfo = pVBInfo->EModeIDTable[ModeIdIndex].
-					Ext_RESINFO; /* si+Ext_ResInfo */
-		}
+		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 
 		if (pVBInfo->VBInfo & SetCRT2ToTV) {
 			temp = xgifb_reg_get(pVBInfo->P3d4, 0x35);
@@ -3380,15 +3004,9 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo,
 	pVBInfo->LCDTypeInfo = 0;
 	pVBInfo->LCDInfo = 0;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ModeFlag // */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	} else {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		/* si+Ext_ResInfo // */
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-	}
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	/* si+Ext_ResInfo // */
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 	temp = xgifb_reg_get(pVBInfo->P3d4, 0x36); /* Get LCD Res.Info */
 	tempbx = temp & 0x0F;
 
@@ -3442,8 +3060,8 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo,
 
 	if (pVBInfo->IF_DEF_LVDS == 0) {
 		if ((pVBInfo->LCDResInfo == Panel_1400x1050) && (pVBInfo->VBInfo
-				& SetCRT2ToLCD) && (ModeNo > 0x13) && (resinfo
-				== 9) && (!(tempbx & EnableScalingLCD)))
+				& SetCRT2ToLCD) && (resinfo == 9) &&
+				(!(tempbx & EnableScalingLCD)))
 			/* set to center in 1280x1024 LCDB for Panel_1400x1050 */
 			tempbx |= SetLCDtoNonExpanding;
 	}
@@ -3453,12 +3071,9 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo,
 			if (!(tempbx & SetLCDtoNonExpanding)) {
 				tempbx |= XGI_EnableLVDSDDA;
 			} else {
-				if (ModeNo > 0x13) {
-					if (pVBInfo->LCDResInfo
-							== Panel_1024x768) {
-						if (resinfo == 4) {/* 512x384 */
-							tempbx |= XGI_EnableLVDSDDA;
-						}
+				if (pVBInfo->LCDResInfo == Panel_1024x768) {
+					if (resinfo == 4) {/* 512x384 */
+						tempbx |= XGI_EnableLVDSDDA;
 					}
 				}
 			}
@@ -3474,56 +3089,17 @@ static unsigned char XGI_GetLCDInfo(unsigned short ModeNo,
 
 	pVBInfo->LCDInfo = tempbx;
 
-	if (pVBInfo->IF_DEF_LVDS == 0) {
-		if (tempax & (LockLCDBToA | StLCDBToA)) {
-			if (pVBInfo->VBInfo & SetInSlaveMode) {
-				if (!(tempax & LockLCDBToA)) {
-					if (ModeNo <= 0x13) {
-						pVBInfo->VBInfo &=
-							~(SetSimuScanMode |
-							  SetInSlaveMode |
-							  SetCRT2ToLCD);
-						pVBInfo->VBInfo |=
-							XGI_SetCRT2ToLCDA |
-							SetCRT2ToDualEdge;
-					}
-				}
-			}
-		}
-	}
-
 	return 1;
 }
 
 unsigned char XGI_SearchModeID(unsigned short ModeNo,
 		unsigned short *ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-	if (ModeNo <= 5)
-		ModeNo |= 1;
-	if (ModeNo <= 0x13) {
-		for (*ModeIdIndex = 0;; (*ModeIdIndex)++) {
-			if (pVBInfo->SModeIDTable[*ModeIdIndex].St_ModeID ==
-			    ModeNo)
-				break;
-			if (pVBInfo->SModeIDTable[*ModeIdIndex].St_ModeID ==
-			    0xFF)
-				return 0;
-		}
-
-		if (ModeNo == 0x07)
-			(*ModeIdIndex)++; /* 400 lines */
-		if (ModeNo <= 3)
-			(*ModeIdIndex) += 2; /* 400 lines */
-		/* else 350 lines */
-	} else {
-		for (*ModeIdIndex = 0;; (*ModeIdIndex)++) {
-			if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID ==
-			    ModeNo)
-				break;
-			if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID ==
-			    0xFF)
-				return 0;
-		}
+	for (*ModeIdIndex = 0;; (*ModeIdIndex)++) {
+		if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == ModeNo)
+			break;
+		if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == 0xFF)
+			return 0;
 	}
 
 	return 1;
@@ -3789,22 +3365,17 @@ static void XGI_GetCRT2ResInfo(unsigned short ModeNo,
 {
 	unsigned short xres, yres, modeflag, resindex;
 
-	resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo);
-	if (ModeNo <= 0x13) {
-		xres = pVBInfo->StResInfo[resindex].HTotal;
-		yres = pVBInfo->StResInfo[resindex].VTotal;
-	} else {
-		xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
-		yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
-		/* si+St_ModeFlag */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
+	yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
+	/* si+St_ModeFlag */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
-		if (modeflag & HalfDCLK)
-			xres *= 2;
+	if (modeflag & HalfDCLK)
+		xres *= 2;
 
-		if (modeflag & DoubleScanMode)
-			yres *= 2;
-	}
+	if (modeflag & DoubleScanMode)
+		yres *= 2;
 
 	if (pVBInfo->VBInfo & SetCRT2ToLCD) {
 		if (pVBInfo->IF_DEF_LVDS == 0) {
@@ -3868,37 +3439,23 @@ static void XGI_GetRAMDAC2DATA(unsigned short ModeNo,
 			       struct vb_device_info *pVBInfo)
 {
 	unsigned short tempax, tempbx, temp1, temp2, modeflag = 0, tempcx,
-			StandTableIndex, CRT1Index;
+			CRT1Index;
 
 	pVBInfo->RVBHCMAX = 1;
 	pVBInfo->RVBHCFACT = 1;
-
-	if (ModeNo <= 0x13) {
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo);
-		tempax = pVBInfo->StandTable[StandTableIndex].CRTC[0];
-		tempbx = pVBInfo->StandTable[StandTableIndex].CRTC[6];
-		temp1 = pVBInfo->StandTable[StandTableIndex].CRTC[7];
-	} else {
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].
-				Ext_CRT1CRTC;
-		CRT1Index &= IndexMask;
-		temp1 = (unsigned short) pVBInfo->
-			XGINEWUB_CRT1Table[CRT1Index].CR[0];
-		temp2 = (unsigned short) pVBInfo->
-			XGINEWUB_CRT1Table[CRT1Index].CR[5];
-		tempax = (temp1 & 0xFF) | ((temp2 & 0x03) << 8);
-		tempbx = (unsigned short) pVBInfo->
-			XGINEWUB_CRT1Table[CRT1Index].CR[8];
-		tempcx = (unsigned short) pVBInfo->
-			XGINEWUB_CRT1Table[CRT1Index].CR[14] << 8;
-		tempcx &= 0x0100;
-		tempcx = tempcx << 2;
-		tempbx |= tempcx;
-		temp1 = (unsigned short) pVBInfo->
-			XGINEWUB_CRT1Table[CRT1Index].CR[9];
-	}
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	CRT1Index &= IndexMask;
+	temp1 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[0];
+	temp2 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[5];
+	tempax = (temp1 & 0xFF) | ((temp2 & 0x03) << 8);
+	tempbx = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[8];
+	tempcx = (unsigned short)
+			pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[14] << 8;
+	tempcx &= 0x0100;
+	tempcx = tempcx << 2;
+	tempbx |= tempcx;
+	temp1 = (unsigned short) pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[9];
 
 	if (temp1 & 0x01)
 		tempbx |= 0x0100;
@@ -3928,16 +3485,9 @@ static void XGI_GetCRT2Data(unsigned short ModeNo, unsigned short ModeIdIndex,
 	struct SiS_LCDData *LCDPtr = NULL;
 	struct SiS_TVData *TVPtr = NULL;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	} else {
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-	}
-
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 	pVBInfo->NewFlickerMode = 0;
 	pVBInfo->RVBHRS = 50;
 
@@ -4141,11 +3691,7 @@ static unsigned short XGI_GetColorDepth(unsigned short ModeNo,
 	short index;
 	unsigned short modeflag;
 
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	index = (modeflag & ModeTypeMask) - ModeEGA;
 
 	if (index < 0)
@@ -4164,11 +3710,7 @@ static unsigned short XGI_GetOffset(unsigned short ModeNo,
 			ColorDepth[] = { 0x01, 0x02, 0x04 };
 
 	modeinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeInfo;
-	if (ModeNo <= 0x14)
-		infoflag = 0;
-	else
-		infoflag = pVBInfo->
-				RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
+	infoflag = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_InfoFlag;
 
 	index = (modeinfo >> 8) & 0xFF;
 
@@ -4228,12 +3770,9 @@ static void XGI_PreSetGroup1(unsigned short ModeNo, unsigned short ModeIdIndex,
 {
 	unsigned short tempcx = 0, CRT1Index = 0, resinfo = 0;
 
-	if (ModeNo > 0x13) {
-		CRT1Index = pVBInfo->
-				RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
-		CRT1Index &= IndexMask;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-	}
+	CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	CRT1Index &= IndexMask;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
 
 	XGI_SetCRT2Offset(ModeNo, ModeIdIndex, RefreshRateTableIndex,
 			HwDeviceExtension, pVBInfo);
@@ -4254,17 +3793,10 @@ static void XGI_SetGroup1(unsigned short ModeNo, unsigned short ModeIdIndex,
 	unsigned short temp = 0, tempax = 0, tempbx = 0, tempcx = 0,
 			pushbx = 0, CRT1Index = 0, modeflag, resinfo = 0;
 
-	if (ModeNo > 0x13) {
-		CRT1Index = pVBInfo->
-				RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
-		CRT1Index &= IndexMask;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-	}
-
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	CRT1Index &= IndexMask;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	/* bainy change table name */
 	if (modeflag & HalfDCLK) {
@@ -4422,18 +3954,11 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 	unsigned short push1, push2, tempax, tempbx = 0, tempcx, temp, resinfo,
 			modeflag, CRT1Index;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	} else {
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-		CRT1Index = pVBInfo->
-				RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
-		CRT1Index &= IndexMask;
-	}
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	CRT1Index &= IndexMask;
 
 	if (!(pVBInfo->VBInfo & SetInSlaveMode))
 		return;
@@ -4500,8 +4025,7 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 			temp -= 6;
 			if (pVBInfo->TVInfo & TVSimuMode) {
 				temp -= 4;
-				if (ModeNo > 0x13)
-					temp -= 10;
+				temp -= 10;
 			}
 		}
 	} else {
@@ -4523,14 +4047,6 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 			if (pVBInfo->LCDResInfo != Panel_1280x960 &&
 			    pVBInfo->VGAHDE >= 800) {
 				temp -= 7;
-				if (pVBInfo->ModeType == ModeEGA &&
-				    pVBInfo->VGAVDE == 1024) {
-					temp += 15;
-					if (pVBInfo->LCDResInfo !=
-						Panel_1280x1024)
-						temp += 7;
-				}
-
 				if (pVBInfo->VGAHDE >= 1280 &&
 				    pVBInfo->LCDResInfo != Panel_1280x960 &&
 				    (pVBInfo->LCDInfo & LCDNonExpanding))
@@ -4546,48 +4062,7 @@ static void XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 
 	if (pVBInfo->VBInfo & SetCRT2ToTV) {
 		if (pVBInfo->TVInfo & TVSimuMode) {
-			if ((ModeNo == 0x06) || (ModeNo == 0x10) || (ModeNo
-					== 0x11) || (ModeNo == 0x13) || (ModeNo
-					== 0x0F)) {
-				xgifb_reg_set(pVBInfo->Part1Port, 0x07, 0x5b);
-				xgifb_reg_set(pVBInfo->Part1Port, 0x08, 0x03);
-			}
-
-			if ((ModeNo == 0x00) || (ModeNo == 0x01)) {
-				if (pVBInfo->TVInfo & SetNTSCTV) {
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x07, 0x2A);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x08, 0x61);
-				} else {
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x07, 0x2A);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x08, 0x41);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x0C, 0xF0);
-				}
-			}
-
-			if ((ModeNo == 0x02) || (ModeNo == 0x03) || (ModeNo
-					== 0x07)) {
-				if (pVBInfo->TVInfo & SetNTSCTV) {
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x07, 0x54);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x08, 0x00);
-				} else {
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x07, 0x55);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x08, 0x00);
-					xgifb_reg_set(pVBInfo->Part1Port,
-							0x0C, 0xF0);
-				}
-			}
-
-			if ((ModeNo == 0x04) || (ModeNo == 0x05) || (ModeNo
-					== 0x0D) || (ModeNo == 0x50)) {
+			if (ModeNo == 0x50) {
 				if (pVBInfo->TVInfo & SetNTSCTV) {
 					xgifb_reg_set(pVBInfo->Part1Port,
 							0x07, 0x30);
@@ -4796,18 +4271,10 @@ static void XGI_SetGroup2(unsigned short ModeNo, unsigned short ModeIdIndex,
 
 	unsigned long longtemp, tempeax, tempebx, temp2, tempecx;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-		crt2crtc = pVBInfo->SModeIDTable[ModeIdIndex].St_CRT2CRTC;
-	} else {
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-		crt2crtc = pVBInfo->RefIndex[RefreshRateTableIndex].
-				Ext_CRT2CRTC;
-	}
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	crt2crtc = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 
 	tempax = 0;
 
@@ -5245,18 +4712,11 @@ static void XGI_SetLCDRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 
 	struct XGI_LCDDesStruct *LCDBDesPtr = NULL;
 
-	if (ModeNo <= 0x13) {
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-		resinfo = pVBInfo->SModeIDTable[ModeIdIndex].St_ResInfo;
-	} else {
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-		resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
-		CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].
-			Ext_CRT1CRTC;
-		CRT1Index &= IndexMask;
-	}
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	resinfo = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	CRT1Index = pVBInfo->RefIndex[RefreshRateTableIndex].Ext_CRT1CRTC;
+	CRT1Index &= IndexMask;
 
 	if (!(pVBInfo->VBInfo & SetCRT2ToLCD))
 		return;
@@ -5274,16 +4734,6 @@ static void XGI_SetLCDRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
 	xgifb_reg_and_or(pVBInfo->Part2Port, 0x2B, 0x0F, temp);
 	temp = 0x01;
 
-	if (pVBInfo->LCDResInfo == Panel_1280x1024) {
-		if (pVBInfo->ModeType == ModeEGA) {
-			if (pVBInfo->VGAHDE >= 1024) {
-				temp = 0x02;
-				if (pVBInfo->LCDInfo & XGI_LCDVESATiming)
-					temp = 0x01;
-			}
-		}
-	}
-
 	xgifb_reg_set(pVBInfo->Part2Port, 0x0B, temp);
 	tempbx = pVBInfo->VDE; /* RTVACTEO=(VDE-1)&0xFF */
 	push1 = tempbx;
@@ -5542,12 +4992,8 @@ static void XGI_SetGroup3(unsigned short ModeNo, unsigned short ModeIdIndex,
 	unsigned char *tempdi;
 	unsigned short modeflag;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	xgifb_reg_set(pVBInfo->Part3Port, 0x00, 0x00);
 	if (pVBInfo->TVInfo & TVSetPAL) {
@@ -5605,13 +5051,8 @@ static void XGI_SetGroup4(unsigned short ModeNo, unsigned short ModeIdIndex,
 
 	unsigned long tempebx, tempeax, templong;
 
-	if (ModeNo <= 0x13)
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		/* si+Ext_ResInfo */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
+	/* si+Ext_ResInfo */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 	temp = pVBInfo->RVBHCFACT;
 	xgifb_reg_set(pVBInfo->Part4Port, 0x13, temp);
 
@@ -5818,32 +5259,22 @@ static unsigned char XGI_XG21CheckLVDSMode(struct xgifb_video_info *xgifb_info,
 {
 	unsigned short xres, yres, colordepth, modeflag, resindex;
 
-	resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo);
-	if (ModeNo <= 0x13) {
-		xres = pVBInfo->StResInfo[resindex].HTotal;
-		yres = pVBInfo->StResInfo[resindex].VTotal;
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	} else {
-		xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
-		yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
-		/* si+St_ModeFlag */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-	}
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
+	yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
+	/* si+St_ModeFlag */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	if (!(modeflag & Charx8Dot)) {
 		xres /= 9;
 		xres *= 8;
 	}
 
-	if (ModeNo > 0x13) {
-		if ((ModeNo > 0x13) && (modeflag & HalfDCLK))
-			xres *= 2;
-
-		if ((ModeNo > 0x13) && (modeflag & DoubleScanMode))
-			yres *= 2;
+	if ((ModeNo > 0x13) && (modeflag & HalfDCLK))
+		xres *= 2;
 
-	}
+	if ((ModeNo > 0x13) && (modeflag & DoubleScanMode))
+		yres *= 2;
 
 	if (xres > xgifb_info->lvds_data.LVDSHDE)
 		return 0;
@@ -5851,16 +5282,11 @@ static unsigned char XGI_XG21CheckLVDSMode(struct xgifb_video_info *xgifb_info,
 	if (yres > xgifb_info->lvds_data.LVDSVDE)
 		return 0;
 
-	if (ModeNo > 0x13) {
-		if (xres != xgifb_info->lvds_data.LVDSHDE ||
-		    yres != xgifb_info->lvds_data.LVDSVDE) {
-			colordepth = XGI_GetColorDepth(ModeNo,
-						       ModeIdIndex,
-						       pVBInfo);
-			if (colordepth > 2)
-				return 0;
-
-		}
+	if (xres != xgifb_info->lvds_data.LVDSHDE ||
+	    yres != xgifb_info->lvds_data.LVDSVDE) {
+		colordepth = XGI_GetColorDepth(ModeNo, ModeIdIndex, pVBInfo);
+		if (colordepth > 2)
+			return 0;
 	}
 	return 1;
 }
@@ -5895,18 +5321,11 @@ static void xgifb_set_lvds(struct xgifb_video_info *xgifb_info,
 	else
 		XGI_SetXG21FPBits(pVBInfo);
 
-	resindex = XGI_GetResInfo(ModeNo, ModeIdIndex, pVBInfo);
-	if (ModeNo <= 0x13) {
-		xres = pVBInfo->StResInfo[resindex].HTotal;
-		yres = pVBInfo->StResInfo[resindex].VTotal;
-		/* si+St_ResInfo */
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	} else {
-		xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
-		yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
-		/* si+St_ModeFlag */
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-	}
+	resindex = pVBInfo->EModeIDTable[ModeIdIndex].Ext_RESINFO;
+	xres = pVBInfo->ModeResInfo[resindex].HTotal; /* xres->ax */
+	yres = pVBInfo->ModeResInfo[resindex].VTotal; /* yres->bx */
+	/* si+St_ModeFlag */
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	if (!(modeflag & Charx8Dot))
 		xres = xres * 8 / 9;
@@ -5914,8 +5333,6 @@ static void xgifb_set_lvds(struct xgifb_video_info *xgifb_info,
 	LVDSHT = xgifb_info->lvds_data.LVDSHT;
 
 	LVDSHBS = xres + (xgifb_info->lvds_data.LVDSHDE - xres) / 2;
-	if ((ModeNo <= 0x13) && (modeflag & HalfDCLK))
-		LVDSHBS -= xres / 4;
 
 	if (LVDSHBS > LVDSHT)
 		LVDSHBS -= LVDSHT;
@@ -5933,7 +5350,7 @@ static void xgifb_set_lvds(struct xgifb_video_info *xgifb_info,
 	LVDSVT = xgifb_info->lvds_data.LVDSVT;
 
 	LVDSVBS = yres + (xgifb_info->lvds_data.LVDSVDE - yres) / 2;
-	if ((ModeNo > 0x13) && (modeflag & DoubleScanMode))
+	if (modeflag & DoubleScanMode)
 		LVDSVBS += yres / 2;
 
 	if (LVDSVBS > LVDSVT)
@@ -6527,7 +5944,7 @@ static void XGI_SetAntiFlicker(unsigned short ModeNo,
 			       unsigned short ModeIdIndex,
 			       struct vb_device_info *pVBInfo)
 {
-	unsigned short tempbx, index;
+	unsigned short tempbx;
 
 	unsigned char tempah;
 
@@ -6536,13 +5953,6 @@ static void XGI_SetAntiFlicker(unsigned short ModeNo,
 
 	tempbx = XGI_GetTVPtrIndex(pVBInfo);
 	tempbx &= 0xFE;
-
-	if (ModeNo <= 0x13)
-		index = pVBInfo->SModeIDTable[ModeIdIndex].VB_StTVFlickerIndex;
-	else
-		index = pVBInfo->EModeIDTable[ModeIdIndex].VB_ExtTVFlickerIndex;
-
-	tempbx += index;
 	tempah = TVAntiFlickList[tempbx];
 	tempah = tempah << 4;
 
@@ -6553,19 +5963,12 @@ static void XGI_SetEdgeEnhance(unsigned short ModeNo,
 			       unsigned short ModeIdIndex,
 			       struct vb_device_info *pVBInfo)
 {
-	unsigned short tempbx, index;
+	unsigned short tempbx;
 
 	unsigned char tempah;
 
 	tempbx = XGI_GetTVPtrIndex(pVBInfo);
 	tempbx &= 0xFE;
-
-	if (ModeNo <= 0x13)
-		index = pVBInfo->SModeIDTable[ModeIdIndex].VB_StTVEdgeIndex;
-	else
-		index = pVBInfo->EModeIDTable[ModeIdIndex].VB_ExtTVEdgeIndex;
-
-	tempbx += index;
 	tempah = TVEdgeList[tempbx];
 	tempah = tempah << 5;
 
@@ -6631,13 +6034,7 @@ static void XGI_SetYFilter(unsigned short ModeNo, unsigned short ModeIdIndex,
 		return;
 	}
 
-	if (ModeNo <= 0x13)
-		tempal = pVBInfo->SModeIDTable[ModeIdIndex].
-				VB_StTVYFilterIndex;
-	else
-		tempal = pVBInfo->EModeIDTable[ModeIdIndex].
-				VB_ExtTVYFilterIndex;
-
+	tempal = pVBInfo->EModeIDTable[ModeIdIndex].VB_ExtTVYFilterIndex;
 	if (tempcl == 0)
 		index = tempal * 4;
 	else
@@ -6712,16 +6109,14 @@ static void XGI_SetCRT2ModeRegs(unsigned short ModeNo,
 		if (pVBInfo->VBInfo & (SetCRT2ToRAMDAC | SetCRT2ToTV
 				| SetCRT2ToLCD)) {
 			tempah = 0x40; /* BTDRAM */
-			if (ModeNo > 0x13) {
-				tempcl = pVBInfo->ModeType;
-				tempcl -= ModeVGA;
-				if (tempcl >= 0) {
-					/* BT Color */
-					tempah = (0x008 >> tempcl);
-					if (tempah == 0)
-						tempah = 1;
-					tempah |= 0x040;
-				}
+			tempcl = pVBInfo->ModeType;
+			tempcl -= ModeVGA;
+			if (tempcl >= 0) {
+				/* BT Color */
+				tempah = (0x008 >> tempcl);
+				if (tempah == 0)
+					tempah = 1;
+				tempah |= 0x040;
 			}
 			if (pVBInfo->VBInfo & SetInSlaveMode)
 				tempah ^= 0x50; /* BTDAC */
@@ -6797,10 +6192,8 @@ static void XGI_SetCRT2ModeRegs(unsigned short ModeNo,
 
 		if (pVBInfo->VBInfo & SetCRT2ToTV) {
 			tempah |= 0x020;
-			if (ModeNo > 0x13) {
-				if (pVBInfo->VBInfo & DriverMode)
-					tempah = tempah ^ 0x20;
-			}
+			if (pVBInfo->VBInfo & DriverMode)
+				tempah = tempah ^ 0x20;
 		}
 
 		xgifb_reg_and_or(pVBInfo->Part4Port, 0x0D, ~0x0BF, tempah);
@@ -6925,13 +6318,7 @@ unsigned short XGI_GetRatePtrCRT2(struct xgi_hw_device_info *pXGIHWDE,
 
 	unsigned short RefreshRateTableIndex, i, modeflag, index, temp;
 
-	if (ModeNo <= 0x13)
-		modeflag = pVBInfo->SModeIDTable[ModeIdIndex].St_ModeFlag;
-	else
-		modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
-
-	if (ModeNo < 0x14)
-		return 0xFFFF;
+	modeflag = pVBInfo->EModeIDTable[ModeIdIndex].Ext_ModeFlag;
 
 	index = xgifb_reg_get(pVBInfo->P3d4, 0x33);
 	index = index >> pVBInfo->SelectCRT2Rate;
@@ -7297,16 +6684,13 @@ static void XGI_SetCRT1Group(struct xgifb_video_info *xgifb_info,
 		unsigned short ModeNo, unsigned short ModeIdIndex,
 		struct vb_device_info *pVBInfo)
 {
-	unsigned short StandTableIndex, RefreshRateTableIndex, b3CC, temp;
+	unsigned short RefreshRateTableIndex, temp;
 
-	unsigned short XGINew_P3cc = pVBInfo->P3cc;
-
-	StandTableIndex = XGI_GetModePtr(ModeNo, ModeIdIndex, pVBInfo);
-	XGI_SetSeqRegs(ModeNo, StandTableIndex, ModeIdIndex, pVBInfo);
-	outb(pVBInfo->StandTable[StandTableIndex].MISC, pVBInfo->P3c2);
-	XGI_SetCRTCRegs(HwDeviceExtension, StandTableIndex, pVBInfo);
-	XGI_SetATTRegs(ModeNo, StandTableIndex, ModeIdIndex, pVBInfo);
-	XGI_SetGRCRegs(StandTableIndex, pVBInfo);
+	XGI_SetSeqRegs(ModeNo, ModeIdIndex, pVBInfo);
+	outb(pVBInfo->StandTable->MISC, pVBInfo->P3c2);
+	XGI_SetCRTCRegs(HwDeviceExtension, pVBInfo);
+	XGI_SetATTRegs(ModeNo, ModeIdIndex, pVBInfo);
+	XGI_SetGRCRegs(pVBInfo);
 	XGI_ClearExt1Regs(pVBInfo);
 
 	if (HwDeviceExtension->jChipType == XG27) {
@@ -7340,22 +6724,6 @@ static void XGI_SetCRT1Group(struct xgifb_video_info *xgifb_info,
 				RefreshRateTableIndex, pVBInfo);
 	}
 
-	if ((HwDeviceExtension->jChipType >= XG20) &&
-	    (HwDeviceExtension->jChipType < XG27)) { /* fix H/W DCLK/2 bug */
-		if ((ModeNo == 0x00) | (ModeNo == 0x01)) {
-			xgifb_reg_set(pVBInfo->P3c4, 0x2B, 0x4E);
-			xgifb_reg_set(pVBInfo->P3c4, 0x2C, 0xE9);
-			b3CC = (unsigned char) inb(XGINew_P3cc);
-			outb((b3CC |= 0x0C), XGINew_P3cc);
-		} else if ((ModeNo == 0x04) | (ModeNo == 0x05) | (ModeNo
-				== 0x0D)) {
-			xgifb_reg_set(pVBInfo->P3c4, 0x2B, 0x1B);
-			xgifb_reg_set(pVBInfo->P3c4, 0x2C, 0xE3);
-			b3CC = (unsigned char) inb(XGINew_P3cc);
-			outb((b3CC |= 0x0C), XGINew_P3cc);
-		}
-	}
-
 	if (HwDeviceExtension->jChipType >= XG21) {
 		temp = xgifb_reg_get(pVBInfo->P3d4, 0x38);
 		if (temp & 0xA0) {
@@ -7394,7 +6762,7 @@ unsigned char XGISetModeNew(struct xgifb_video_info *xgifb_info,
 	unsigned short ModeIdIndex;
 	struct vb_device_info VBINF;
 	struct vb_device_info *pVBInfo = &VBINF;
-	pVBInfo->BaseAddr = (unsigned long) HwDeviceExtension->pjIOAddress;
+	pVBInfo->BaseAddr = xgifb_info->vga_base;
 	pVBInfo->IF_DEF_LVDS = 0;
 	pVBInfo->IF_DEF_LCDA = 1;
 
@@ -7509,13 +6877,8 @@ unsigned char XGISetModeNew(struct xgifb_video_info *xgifb_info,
 						   pVBInfo))
 				return 0;
 
-		if (ModeNo <= 0x13) {
-			pVBInfo->ModeType = pVBInfo->SModeIDTable[ModeIdIndex].
-						St_ModeFlag & ModeTypeMask;
-		} else {
-			pVBInfo->ModeType = pVBInfo->EModeIDTable[ModeIdIndex].
+		pVBInfo->ModeType = pVBInfo->EModeIDTable[ModeIdIndex].
 						Ext_ModeFlag & ModeTypeMask;
-		}
 
 		pVBInfo->SetFlag = 0;
 		pVBInfo->VBInfo = DisableCRT2Display;
diff --git a/drivers/staging/xgifb/vb_struct.h b/drivers/staging/xgifb/vb_struct.h
index a5bd56af92b1..38f47ffc69c4 100644
--- a/drivers/staging/xgifb/vb_struct.h
+++ b/drivers/staging/xgifb/vb_struct.h
@@ -10,28 +10,11 @@ struct XGI_LVDSCRT1VDataStruct {
 	unsigned char Reg[7];
 };
 
-struct XGI_StStruct {
-	unsigned char St_ModeID;
-	unsigned short St_ModeFlag;
-	unsigned char St_StTableIndex;
-	unsigned char St_CRT2CRTC;
-	unsigned char St_CRT2CRTC2;
-	unsigned char St_ResInfo;
-	unsigned char VB_StTVFlickerIndex;
-	unsigned char VB_StTVEdgeIndex;
-	unsigned char VB_StTVYFilterIndex;
-};
-
 struct XGI_ExtStruct {
 	unsigned char Ext_ModeID;
 	unsigned short Ext_ModeFlag;
 	unsigned short Ext_ModeInfo;
-	unsigned short Ext_Point;
-	unsigned short Ext_VESAID;
-	unsigned char Ext_VESAMEMSize;
 	unsigned char Ext_RESINFO;
-	unsigned char VB_ExtTVFlickerIndex;
-	unsigned char VB_ExtTVEdgeIndex;
 	unsigned char VB_ExtTVYFilterIndex;
 	unsigned char REFindex;
 };
@@ -68,14 +51,6 @@ struct XGI_LCDDataTablStruct {
 	unsigned short DATAPTR;
 };
 
-struct XGI330_LCDDataDesStruct {
-	unsigned short LCDHDES;
-	unsigned short LCDHRS;
-	unsigned short LCDVDES;
-	unsigned short LCDVRS;
-};
-
-
 struct XGI330_LVDSDataStruct {
 	unsigned short VGAHT;
 	unsigned short VGAVT;
@@ -236,7 +211,6 @@ struct vb_device_info {
 
 	void __iomem *FBAddr;
 	unsigned long BaseAddr;
-	unsigned long RelIO;
 
 	unsigned char (*CR6B)[4];
 	unsigned char (*CR6E)[4];
@@ -314,7 +288,6 @@ struct vb_device_info {
 	struct XGI_TimingHStruct  *TimingH;
 	struct XGI_TimingVStruct  *TimingV;
 
-	struct XGI_StStruct          *SModeIDTable;
 	struct SiS_StandTable_S  *StandTable;
 	struct XGI_ExtStruct         *EModeIDTable;
 	struct XGI_Ext2Struct        *RefIndex;
diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h
index e8d6f674b274..d22e599cb305 100644
--- a/drivers/staging/xgifb/vb_table.h
+++ b/drivers/staging/xgifb/vb_table.h
@@ -135,609 +135,92 @@ static unsigned char XGI330_SR33;
 static unsigned char XG40_CRCF = 0x13;
 static unsigned char XG40_DRAMTypeDefinition = 0xFF ;
 
-static struct XGI_StStruct XGI330_SModeIDTable[] = {
-	{0x01, 0x9208, 0x01, 0x00, 0x10, 0x00, 0x00, 0x01, 0x00},
-	{0x01, 0x1210, 0x14, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00},
-	{0x01, 0x1010, 0x17, 0x02, 0x11, 0x00, 0x00, 0x01, 0x01},
-	{0x03, 0x8208, 0x03, 0x00, 0x14, 0x00, 0x00, 0x01, 0x02},
-	{0x03, 0x0210, 0x16, 0x01, 0x04, 0x01, 0x00, 0x01, 0x02},
-	{0x03, 0x0010, 0x18, 0x02, 0x15, 0x00, 0x00, 0x01, 0x03},
-	{0x05, 0x9209, 0x05, 0x00, 0x10, 0x00, 0x00, 0x00, 0x04},
-	{0x06, 0x8209, 0x06, 0x00, 0x14, 0x00, 0x00, 0x00, 0x05},
-	{0x07, 0x0000, 0x07, 0x03, 0x05, 0x03, 0x00, 0x01, 0x03},
-	{0x07, 0x0000, 0x19, 0x02, 0x15, 0x02, 0x00, 0x01, 0x03},
-	{0x0d, 0x920a, 0x0d, 0x00, 0x10, 0x00, 0x00, 0x00, 0x04},
-	{0x0e, 0x820a, 0x0e, 0x00, 0x14, 0x00, 0x00, 0x00, 0x05},
-	{0x0f, 0x0202, 0x11, 0x01, 0x04, 0x01, 0x00, 0x00, 0x05},
-	{0x10, 0x0212, 0x12, 0x01, 0x04, 0x01, 0x00, 0x00, 0x05},
-	{0x11, 0x0212, 0x1a, 0x04, 0x24, 0x04, 0x00, 0x00, 0x05},
-	{0x12, 0x0212, 0x1b, 0x04, 0x24, 0x04, 0x00, 0x00, 0x05},
-	{0x13, 0x021b, 0x1c, 0x00, 0x14, 0x00, 0x00, 0x00, 0x04},
-	{0x12, 0x0010, 0x18, 0x02, 0x24, 0x02, 0x00, 0x00, 0x05},/* St_CRT2CRTC2
-								    not sure */
-	{0x12, 0x0210, 0x18, 0x01, 0x24, 0x01, 0x00, 0x00, 0x05},/* St_CRT2CRTC2
-								    not sure */
-	{0xff, 0x0000, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}
-};
-
-
 static struct XGI_ExtStruct XGI330_EModeIDTable[] = {
-	{0x6a, 0x2212, 0x0407, 0x3a81, 0x0102, 0x08,
-		0x07, 0x00, 0x00, 0x07, 0x0e},
-	{0x2e, 0x0a1b, 0x0306, 0x3a57, 0x0101, 0x08,
-		0x06, 0x00, 0x00, 0x05, 0x06},
-	{0x2f, 0x0a1b, 0x0305, 0x3a50, 0x0100, 0x08,
-		0x05, 0x00, 0x00, 0x05, 0x05},
-	{0x30, 0x2a1b, 0x0407, 0x3a81, 0x0103, 0x08,
-		0x07, 0x00, 0x00, 0x07, 0x0e},
-	{0x31, 0x0a1b, 0x030d, 0x3b85, 0x0000, 0x08,
-		0x0d, 0x00, 0x00, 0x06, 0x3d},
-	{0x32, 0x0a1b, 0x0a0e, 0x3b8c, 0x0000, 0x08,
-		0x0e, 0x00, 0x00, 0x06, 0x3e},
-	{0x33, 0x0a1d, 0x0a0d, 0x3b85, 0x0000, 0x08,
-		0x0d, 0x00, 0x00, 0x06, 0x3d},
-	{0x34, 0x2a1d, 0x0a0e, 0x3b8c, 0x0000, 0x08,
-		0x0e, 0x00, 0x00, 0x06, 0x3e},
-	{0x35, 0x0a1f, 0x0a0d, 0x3b85, 0x0000, 0x08,
-		0x0d, 0x00, 0x00, 0x06, 0x3d},
-	{0x36, 0x2a1f, 0x0a0e, 0x3b8c, 0x0000, 0x08,
-		0x0e, 0x00, 0x00, 0x06, 0x3e},
-	{0x37, 0x0212, 0x0508, 0x3aab, 0x0104, 0x08,
-		0x08, 0x00, 0x00, 0x00, 0x16},
-	{0x38, 0x0a1b, 0x0508, 0x3aab, 0x0105, 0x08,
-		0x08, 0x00, 0x00, 0x00, 0x16},
-	{0x3a, 0x0e3b, 0x0609, 0x3adc, 0x0107, 0x08,
-		0x09, 0x00, 0x00, 0x00, 0x1e},
-	{0x3c, 0x0e3b, 0x070a, 0x3af2, 0x0130, 0x08,
-		0x0a, 0x00, 0x00, 0x00, 0x22},	/* mode 1600x1200
+	{0x2e, 0x0a1b, 0x0306, 0x06, 0x05, 0x06},
+	{0x2f, 0x0a1b, 0x0305, 0x05, 0x05, 0x05},
+	{0x30, 0x2a1b, 0x0407, 0x07, 0x07, 0x0e},
+	{0x31, 0x0a1b, 0x030d, 0x0d, 0x06, 0x3d},
+	{0x32, 0x0a1b, 0x0a0e, 0x0e, 0x06, 0x3e},
+	{0x33, 0x0a1d, 0x0a0d, 0x0d, 0x06, 0x3d},
+	{0x34, 0x2a1d, 0x0a0e, 0x0e, 0x06, 0x3e},
+	{0x35, 0x0a1f, 0x0a0d, 0x0d, 0x06, 0x3d},
+	{0x36, 0x2a1f, 0x0a0e, 0x0e, 0x06, 0x3e},
+	{0x38, 0x0a1b, 0x0508, 0x08, 0x00, 0x16},
+	{0x3a, 0x0e3b, 0x0609, 0x09, 0x00, 0x1e},
+	{0x3c, 0x0e3b, 0x070a, 0x0a, 0x00, 0x22}, /* mode 1600x1200
 						   add CRT2MODE [2003/10/07] */
-	{0x3d, 0x0e7d, 0x070a, 0x3af2, 0x0131, 0x08,
-		0x0a, 0x00, 0x00, 0x00, 0x22},	/* mode 1600x1200
+	{0x3d, 0x0e7d, 0x070a, 0x0a, 0x00, 0x22}, /* mode 1600x1200
 						   add CRT2MODE */
-	{0x40, 0x9a1c, 0x0000, 0x3a34, 0x010d, 0x08,
-		0x00, 0x00, 0x00, 0x04, 0x00},
-	{0x41, 0x9a1d, 0x0000, 0x3a34, 0x010e, 0x08,
-		0x00, 0x00, 0x00, 0x04, 0x00},	/* ModeIdIndex = 0x10 */
-	{0x43, 0x0a1c, 0x0306, 0x3a57, 0x0110, 0x08,
-		0x06, 0x00, 0x00, 0x05, 0x06},
-	{0x44, 0x0a1d, 0x0306, 0x3a57, 0x0111, 0x08,
-		0x06, 0x00, 0x00, 0x05, 0x06},
-	{0x46, 0x2a1c, 0x0407, 0x3a81, 0x0113, 0x08,
-		0x07, 0x00, 0x00, 0x07, 0x0e},
-	{0x47, 0x2a1d, 0x0407, 0x3a81, 0x0114, 0x08,
-		0x07, 0x00, 0x00, 0x07, 0x0e},
-	{0x49, 0x0a3c, 0x0508, 0x3aab, 0x0116, 0x08,
-		0x08, 0x00, 0x00, 0x00, 0x16},
-	{0x4a, 0x0a3d, 0x0508, 0x3aab, 0x0117, 0x08,
-		0x08, 0x00, 0x00, 0x00, 0x16},
-	{0x4c, 0x0e7c, 0x0609, 0x3adc, 0x0119, 0x08,
-		0x09, 0x00, 0x00, 0x00, 0x1e},
-	{0x4d, 0x0e7d, 0x0609, 0x3adc, 0x011a, 0x08,
-		0x09, 0x00, 0x00, 0x00, 0x1e},
-	{0x50, 0x9a1b, 0x0001, 0x3a3b, 0x0132, 0x08,
-		0x01, 0x00, 0x00, 0x04, 0x02},
-	{0x51, 0xba1b, 0x0103, 0x3a42, 0x0133, 0x08,
-		0x03, 0x00, 0x00, 0x07, 0x03},
-	{0x52, 0x9a1b, 0x0204, 0x3a49, 0x0134, 0x08,
-		0x04, 0x00, 0x00, 0x00, 0x04},
-	{0x56, 0x9a1d, 0x0001, 0x3a3b, 0x0135, 0x08,
-		0x01, 0x00, 0x00, 0x04, 0x02},
-	{0x57, 0xba1d, 0x0103, 0x3a42, 0x0136, 0x08,
-		0x03, 0x00, 0x00, 0x07, 0x03},
-	{0x58, 0x9a1d, 0x0204, 0x3a49, 0x0137, 0x08,
-		0x04, 0x00, 0x00, 0x00, 0x04},
-	{0x59, 0x9a1b, 0x0000, 0x3a34, 0x0138, 0x08,
-		0x00, 0x00, 0x00, 0x04, 0x00},
-	{0x5A, 0x021b, 0x0014, 0x3b83, 0x0138, 0x08,
-		0x01, 0x00, 0x00, 0x04, 0x3f},	/* ModeIdIndex = 0x20 */
-	{0x5B, 0x0a1d, 0x0014, 0x3b83, 0x0135, 0x08,
-		0x01, 0x00, 0x00, 0x04, 0x3f},
-	{0x5d, 0x0a1d, 0x0305, 0x3a50, 0x0139, 0x08,
-		0x05, 0x00, 0x00, 0x07, 0x05},
-	{0x62, 0x0a3f, 0x0306, 0x3a57, 0x013a, 0x08,
-		0x06, 0x00, 0x00, 0x05, 0x06},
-	{0x63, 0x2a3f, 0x0407, 0x3a81, 0x013b, 0x08,
-		0x07, 0x00, 0x00, 0x07, 0x0e},
-	{0x64, 0x0a7f, 0x0508, 0x3aab, 0x013c, 0x08,
-		0x08, 0x00, 0x00, 0x00, 0x16},
-	{0x65, 0x0eff, 0x0609, 0x3adc, 0x013d, 0x08,
-		0x09, 0x00, 0x00, 0x00, 0x1e},
-	{0x66, 0x0eff, 0x070a, 0x3af2, 0x013e, 0x08,
-		0x0a, 0x00, 0x00, 0x00, 0x22},	/* mode 1600x1200
+	{0x40, 0x9a1c, 0x0000, 0x00, 0x04, 0x00},
+	{0x41, 0x9a1d, 0x0000, 0x00, 0x04, 0x00},
+	{0x43, 0x0a1c, 0x0306, 0x06, 0x05, 0x06},
+	{0x44, 0x0a1d, 0x0306, 0x06, 0x05, 0x06},
+	{0x46, 0x2a1c, 0x0407, 0x07, 0x07, 0x0e},
+	{0x47, 0x2a1d, 0x0407, 0x07, 0x07, 0x0e},
+	{0x49, 0x0a3c, 0x0508, 0x08, 0x00, 0x16},
+	{0x4a, 0x0a3d, 0x0508, 0x08, 0x00, 0x16},
+	{0x4c, 0x0e7c, 0x0609, 0x09, 0x00, 0x1e},
+	{0x4d, 0x0e7d, 0x0609, 0x09, 0x00, 0x1e},
+	{0x50, 0x9a1b, 0x0001, 0x01, 0x04, 0x02},
+	{0x51, 0xba1b, 0x0103, 0x03, 0x07, 0x03},
+	{0x52, 0x9a1b, 0x0204, 0x04, 0x00, 0x04},
+	{0x56, 0x9a1d, 0x0001, 0x01, 0x04, 0x02},
+	{0x57, 0xba1d, 0x0103, 0x03, 0x07, 0x03},
+	{0x58, 0x9a1d, 0x0204, 0x04, 0x00, 0x04},
+	{0x59, 0x9a1b, 0x0000, 0x00, 0x04, 0x00},
+	{0x5A, 0x021b, 0x0014, 0x01, 0x04, 0x3f},
+	{0x5B, 0x0a1d, 0x0014, 0x01, 0x04, 0x3f},
+	{0x5d, 0x0a1d, 0x0305, 0x05, 0x07, 0x05},
+	{0x62, 0x0a3f, 0x0306, 0x06, 0x05, 0x06},
+	{0x63, 0x2a3f, 0x0407, 0x07, 0x07, 0x0e},
+	{0x64, 0x0a7f, 0x0508, 0x08, 0x00, 0x16},
+	{0x65, 0x0eff, 0x0609, 0x09, 0x00, 0x1e},
+	{0x66, 0x0eff, 0x070a, 0x0a, 0x00, 0x22}, /* mode 1600x1200
 						   add CRT2MODE */
-	{0x68, 0x067b, 0x080b, 0x3b17, 0x013f, 0x08,
-		0x0b, 0x00, 0x00, 0x00, 0x29},
-	{0x69, 0x06fd, 0x080b, 0x3b17, 0x0140, 0x08,
-		0x0b, 0x00, 0x00, 0x00, 0x29},
-	{0x6b, 0x07ff, 0x080b, 0x3b17, 0x0141, 0x10,
-		0x0b, 0x00, 0x00, 0x00, 0x29},
-	{0x6c, 0x067b, 0x090c, 0x3b37, 0x0000, 0x08,
-		0x0c, 0x00, 0x00, 0x00, 0x2f},
-	{0x6d, 0x06fd, 0x090c, 0x3b37, 0x0000, 0x10,
-		0x0c, 0x00, 0x00, 0x00, 0x2f},
-	{0x6e, 0x07ff, 0x090c, 0x3b37, 0x0000, 0x10,
-		0x0c, 0x00, 0x00, 0x00, 0x2f},
-	{0x70, 0x2a1b, 0x0410, 0x3b52, 0x0000, 0x08,
-		0x10, 0x00, 0x00, 0x07, 0x34},
-	{0x71, 0x0a1b, 0x0511, 0x3b63, 0x0000, 0x08,
-		0x11, 0x00, 0x00, 0x00, 0x37},
-	{0x74, 0x0a1d, 0x0511, 0x3b63, 0x0000, 0x08,
-		0x11, 0x00, 0x00, 0x00, 0x37},	/* ModeIdIndex = 0x30 */
-	{0x75, 0x0a3d, 0x0612, 0x3b74, 0x0000, 0x08,
-		0x12, 0x00, 0x00, 0x00, 0x3a},
-	{0x76, 0x2a1f, 0x0410, 0x3b52, 0x0000, 0x08,
-		0x10, 0x00, 0x00, 0x07, 0x34},
-	{0x77, 0x0a1f, 0x0511, 0x3b63, 0x0000, 0x08,
-		0x11, 0x00, 0x00, 0x00, 0x37},
-	{0x78, 0x0a3f, 0x0612, 0x3b74, 0x0000, 0x08,
-		0x12, 0x00, 0x00, 0x00, 0x3a},
-	{0x79, 0x0a3b, 0x0612, 0x3b74, 0x0000, 0x08,
-		0x12, 0x00, 0x00, 0x00, 0x3a},
-	{0x7a, 0x2a1d, 0x0410, 0x3b52, 0x0000, 0x08,
-		0x10, 0x00, 0x00, 0x07, 0x34},
-	{0x7b, 0x0e3b, 0x060f, 0x3ad0, 0x0000, 0x08,
-		0x0f, 0x00, 0x00, 0x00, 0x1d},
-	{0x7c, 0x0e7d, 0x060f, 0x3ad0, 0x0000, 0x08,
-		0x0f, 0x00, 0x00, 0x00, 0x1d},
-	{0x7d, 0x0eff, 0x060f, 0x3ad0, 0x0000, 0x08,
-		0x0f, 0x00, 0x00, 0x00, 0x1d},
-	{0x20, 0x0e3b, 0x0D16, 0x49e0, 0x0000, 0x08,
-		0x16, 0x00, 0x00, 0x00, 0x43},
-	{0x21, 0x0e7d, 0x0D16, 0x49e0, 0x0000, 0x08,
-		0x16, 0x00, 0x00, 0x00, 0x43},
-	{0x22, 0x0eff, 0x0D16, 0x49e0, 0x0000, 0x08,
-		0x16, 0x00, 0x00, 0x00, 0x43},
-	{0x23, 0x0e3b, 0x0614, 0x49d5, 0x0000, 0x08,
-		0x14, 0x00, 0x00, 0x00, 0x41},
-	{0x24, 0x0e7d, 0x0614, 0x49d5, 0x0000, 0x08,
-		0x14, 0x00, 0x00, 0x00, 0x41},
-	{0x25, 0x0eff, 0x0614, 0x49d5, 0x0000, 0x08,
-		0x14, 0x00, 0x00, 0x00, 0x41},
-	{0x26, 0x063b, 0x0c15, 0x49dc, 0x0000, 0x08,
-		0x15, 0x00, 0x00, 0x00, 0x42},	/* ModeIdIndex = 0x40 */
-	{0x27, 0x067d, 0x0c15, 0x49dc, 0x0000, 0x08,
-		0x15, 0x00, 0x00, 0x00, 0x42},
-	{0x28, 0x06ff, 0x0c15, 0x49dc, 0x0000, 0x08,
-		0x15, 0x00, 0x00, 0x00, 0x42},
-	{0xff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00,
-		0x00, 0x00, 0x00, 0x00, 0x00}
-};
-
-static struct SiS_StandTable_S XGI330_StandTable[] = {
-/* MD_0_200 */
-	{
-		0x28, 0x18, 0x08, 0x0800,
-		{0x09, 0x03, 0x00, 0x02},
-		0x63,
-		{0x2d, 0x27, 0x28, 0x90, 0x2b, 0xa0, 0xbf, 0x1f,
-		 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_1_200 */
-	{
-		0x28, 0x18, 0x08, 0x0800,
-		{0x09, 0x03, 0x00, 0x02},
-		0x63,
-		{0x2d, 0x27, 0x28, 0x90, 0x2b, 0xa0, 0xbf, 0x1f,
-		 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_2_200 */
-	{
-		0x50, 0x18, 0x08, 0x1000,
-		{0x01, 0x03, 0x00, 0x02},
-		 0x63,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_3_200 */
-	{
-		0x50, 0x18, 0x08, 0x1000,
-		{0x01, 0x03, 0x00, 0x02},
-		 0x63,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0xc7, 0x06, 0x07, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_4 */
-	{
-		0x28, 0x18, 0x08, 0x4000,
-		{0x09, 0x03, 0x00, 0x02},
-		 0x63,
-		{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f,
-		 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xa2,
-		 0xff},
-		{0x00, 0x13, 0x15, 0x17, 0x02, 0x04, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x01, 0x00, 0x03, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0f, 0x00,
-		 0xff}
-	},
-/* MD_5 */
-	{
-		0x28, 0x18, 0x08, 0x4000,
-		{0x09, 0x03, 0x00, 0x02},
-		 0x63,
-		{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f,
-		 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xa2,
-		 0xff},
-		{0x00, 0x13, 0x15, 0x17, 0x02, 0x04, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x01, 0x00, 0x03, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0f, 0x00,
-		 0xff}
-	},
-/* MD_6 */
-	{
-		0x50, 0x18, 0x08, 0x4000,
-		{0x01, 0x01, 0x00, 0x06},
-		 0x63,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x00, 0x96, 0xb9, 0xc2,
-		 0xff},
-		{0x00, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17,
-		 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17,
-		 0x01, 0x00, 0x01, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0d, 0x00,
-		 0xff}
-	},
-/* MD_7 */
-	{
-		0x50, 0x18, 0x0e, 0x1000,
-		{0x00, 0x03, 0x00, 0x03},
-		 0xa6,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00,
-		 0x83, 0x85, 0x5d, 0x28, 0x0d, 0x63, 0xba, 0xa3,
-		 0xff},
-		{0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-		 0x10, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-		 0x0e, 0x00, 0x0f, 0x08},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0a, 0x00,
-		 0xff}
-	},
-/* MDA_DAC */
-	{
-		0x00, 0x00, 0x00, 0x0000,
-		{0x00, 0x00, 0x00, 0x15},
-		 0x15,
-		{0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-		 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x3f, 0x3f,
-		 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x00, 0x00,
-		 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x15, 0x15, 0x15,
-		 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
-		 0x15, 0x15, 0x15, 0x15},
-		{0x15, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
-		 0x3f}
-	},
-/* CGA_DAC */
-	{
-		0x00, 0x10, 0x04, 0x0114,
-		{0x11, 0x09, 0x15, 0x00},
-		 0x10,
-		{0x04, 0x14, 0x01, 0x11, 0x09, 0x15, 0x2a, 0x3a,
-		 0x2e, 0x3e, 0x2b, 0x3b, 0x2f, 0x3f, 0x2a, 0x3a,
-		 0x2e, 0x3e, 0x2b, 0x3b, 0x2f, 0x3f, 0x00, 0x10,
-		 0x04},
-		{0x14, 0x01, 0x11, 0x09, 0x15, 0x00, 0x10, 0x04,
-		 0x14, 0x01, 0x11, 0x09, 0x15, 0x2a, 0x3a, 0x2e,
-		 0x3e, 0x2b, 0x3b, 0x2f},
-		{0x3f, 0x2a, 0x3a, 0x2e, 0x3e, 0x2b, 0x3b, 0x2f,
-		 0x3f}
-	},
-/* EGA_DAC */
-	{
-		0x00, 0x10, 0x04, 0x0114,
-		{0x11, 0x05, 0x15, 0x20},
-		 0x30,
-		{0x24, 0x34, 0x21, 0x31, 0x25, 0x35, 0x08, 0x18,
-		 0x0c, 0x1c, 0x09, 0x19, 0x0d, 0x1d, 0x28, 0x38,
-		 0x2c, 0x3c, 0x29, 0x39, 0x2d, 0x3d, 0x02, 0x12,
-		 0x06},
-		{0x16, 0x03, 0x13, 0x07, 0x17, 0x22, 0x32, 0x26,
-		 0x36, 0x23, 0x33, 0x27, 0x37, 0x0a, 0x1a, 0x0e,
-		 0x1e, 0x0b, 0x1b, 0x0f},
-		{0x1f, 0x2a, 0x3a, 0x2e, 0x3e, 0x2b, 0x3b, 0x2f,
-		 0x3f}
-	},
-/* VGA_DAC */
-	{
-		0x00, 0x10, 0x04, 0x0114,
-		{0x11, 0x09, 0x15, 0x2a},
-		 0x3a,
-		{0x2e, 0x3e, 0x2b, 0x3b, 0x2f, 0x3f, 0x00, 0x05,
-		 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x18, 0x1c, 0x20,
-		 0x24, 0x28, 0x2d, 0x32, 0x38, 0x3f, 0x00, 0x10,
-		 0x1f},
-		{0x2f, 0x3f, 0x1f, 0x27, 0x2f, 0x37, 0x3f, 0x2d,
-		 0x31, 0x36, 0x3a, 0x3f, 0x00, 0x07, 0x0e, 0x15,
-		 0x1c, 0x0e, 0x11, 0x15},
-		{0x18, 0x1c, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x00,
-		 0x04}
-	},
-	{
-		0x08, 0x0c, 0x10, 0x0a08,
-		{0x0c, 0x0e, 0x10, 0x0b},
-		 0x0c,
-		{0x0d, 0x0f, 0x10, 0x10, 0x01, 0x08, 0x00, 0x00,
-		 0x00, 0x00, 0x01, 0x00, 0x02, 0x02, 0x01, 0x00,
-		 0x04, 0x04, 0x01, 0x00, 0x05, 0x02, 0x05, 0x00,
-		 0x06},
-		{0x01, 0x06, 0x05, 0x06, 0x00, 0x08, 0x01, 0x08,
-		 0x00, 0x07, 0x02, 0x07, 0x06, 0x07, 0x00, 0x00,
-		 0x00, 0x00, 0x00, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x00}
-	},
-/* MD_D */
-	{
-		0x28, 0x18, 0x08, 0x2000,
-		{0x09, 0x0f, 0x00, 0x06},
-		 0x63,
-		{0x2d, 0x27, 0x28, 0x90, 0x2c, 0x80, 0xbf, 0x1f,
-		 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xe3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x01, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f,
-		 0xff}
-	},
-/* MD_E */
-	{
-		0x50, 0x18, 0x08, 0x4000,
-		{0x01, 0x0f, 0x00, 0x06},
-		 0x63,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x00, 0x96, 0xb9, 0xe3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-		 0x01, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f,
-		 0xff}
-	},
+	{0x68, 0x067b, 0x080b, 0x0b, 0x00, 0x29},
+	{0x69, 0x06fd, 0x080b, 0x0b, 0x00, 0x29},
+	{0x6b, 0x07ff, 0x080b, 0x0b, 0x00, 0x29},
+	{0x6c, 0x067b, 0x090c, 0x0c, 0x00, 0x2f},
+	{0x6d, 0x06fd, 0x090c, 0x0c, 0x00, 0x2f},
+	{0x6e, 0x07ff, 0x090c, 0x0c, 0x00, 0x2f},
+	{0x70, 0x2a1b, 0x0410, 0x10, 0x07, 0x34},
+	{0x71, 0x0a1b, 0x0511, 0x11, 0x00, 0x37},
+	{0x74, 0x0a1d, 0x0511, 0x11, 0x00, 0x37},
+	{0x75, 0x0a3d, 0x0612, 0x12, 0x00, 0x3a},
+	{0x76, 0x2a1f, 0x0410, 0x10, 0x07, 0x34},
+	{0x77, 0x0a1f, 0x0511, 0x11, 0x00, 0x37},
+	{0x78, 0x0a3f, 0x0612, 0x12, 0x00, 0x3a},
+	{0x79, 0x0a3b, 0x0612, 0x12, 0x00, 0x3a},
+	{0x7a, 0x2a1d, 0x0410, 0x10, 0x07, 0x34},
+	{0x7b, 0x0e3b, 0x060f, 0x0f, 0x00, 0x1d},
+	{0x7c, 0x0e7d, 0x060f, 0x0f, 0x00, 0x1d},
+	{0x7d, 0x0eff, 0x060f, 0x0f, 0x00, 0x1d},
+	{0x20, 0x0e3b, 0x0D16, 0x16, 0x00, 0x43},
+	{0x21, 0x0e7d, 0x0D16, 0x16, 0x00, 0x43},
+	{0x22, 0x0eff, 0x0D16, 0x16, 0x00, 0x43},
+	{0x23, 0x0e3b, 0x0614, 0x14, 0x00, 0x41},
+	{0x24, 0x0e7d, 0x0614, 0x14, 0x00, 0x41},
+	{0x25, 0x0eff, 0x0614, 0x14, 0x00, 0x41},
+	{0x26, 0x063b, 0x0c15, 0x15, 0x00, 0x42},
+	{0x27, 0x067d, 0x0c15, 0x15, 0x00, 0x42},
+	{0x28, 0x06ff, 0x0c15, 0x15, 0x00, 0x42},
+	{0xff, 0x0000, 0x0000, 0x00, 0x00, 0x00}
+};
+
+static struct SiS_StandTable_S XGI330_StandTable = {
 /* ExtVGATable */
-	{
-		0x00, 0x00, 0x00, 0x0000,
-		{0x01, 0x0f, 0x00, 0x0e},
-		 0x23,
-		{0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e,
-		 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
-		 0x01, 0x00, 0x00, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f,
-		 0xff}
-	},
-/* ROM_SAVEPTR */
-	{
-		0x9f, 0x3b, 0x00, 0x00c0,
-		{0x00, 0x00, 0x00, 0x00},
-		 0x00,
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xbb, 0x3f,
-		 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x00, 0x00, 0x1a, 0x00, 0xac, 0x3e, 0x00, 0xc0,
-		 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x00, 0x00, 0x00, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x00}
-	},
-/* MD_F */
-	{
-		0x50, 0x18, 0x0e, 0x8000,
-		{0x01, 0x0f, 0x00, 0x06},
-		 0xa2,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x82, 0x84, 0x5d, 0x28, 0x0f, 0x63, 0xba, 0xe3,
-		 0xff},
-		{0x00, 0x08, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00,
-		 0x00, 0x08, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00,
-		 0x0b, 0x00, 0x05, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x05,
-		 0xff}
-	},
-/* MD_10 */
-	{
-		0x50, 0x18, 0x0e, 0x8000,
-		{0x01, 0x0f, 0x00, 0x06},
-		 0xa3,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x82, 0x84, 0x5d, 0x28, 0x0f, 0x63, 0xba, 0xe3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x01, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f,
-		 0xff}
-	},
-/* MD_0_350 */
-	{
-		0x28, 0x18, 0x0e, 0x0800,
-		{0x09, 0x03, 0x00, 0x02},
-		 0xa3,
-		{0x2d, 0x27, 0x28, 0x90, 0x2b, 0xb1, 0xbf, 0x1f,
-		 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00,
-		 0x83, 0x85, 0x5d, 0x14, 0x1f, 0x63, 0xba, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_1_350 */
-	{
-		0x28, 0x18, 0x0e, 0x0800,
-		{0x09, 0x03, 0x00, 0x02},
-		 0xa3,
-		{0x2d, 0x27, 0x28, 0x90, 0x2b, 0xa0, 0xbf, 0x1f,
-		 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00,
-		 0x83, 0x85, 0x5d, 0x14, 0x1f, 0x63, 0xba, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_2_350 */
-	{
-		0x50, 0x18, 0x0e, 0x1000,
-		{0x01, 0x03, 0x00, 0x02},
-		 0xa3,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00,
-		 0x83, 0x85, 0x5d, 0x28, 0x1f, 0x63, 0xba, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_3_350 */
-	{
-		0x50, 0x18, 0x0e, 0x1000,
-		{0x01, 0x03, 0x00, 0x02},
-		 0xa3,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x4d, 0x0b, 0x0c, 0x00, 0x00, 0x00, 0x00,
-		 0x83, 0x85, 0x5d, 0x28, 0x1f, 0x63, 0xba, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x08, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_0_1_400 */
-	{
-		0x28, 0x18, 0x10, 0x0800,
-		{0x08, 0x03, 0x00, 0x02},
-		 0x67,
-		{0x2d, 0x27, 0x28, 0x90, 0x2b, 0xb1, 0xbf, 0x1f,
-		 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x14, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x0c, 0x00, 0x0f, 0x08},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_2_3_400 */
-	{
-		0x50, 0x18, 0x10, 0x1000,
-		{0x00, 0x03, 0x00, 0x02},
-		 0x67,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x0c, 0x00, 0x0f, 0x08},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00,
-		 0xff}
-	},
-/* MD_7_400 */
-	{
-		0x50, 0x18, 0x10, 0x1000,
-		{0x00, 0x03, 0x00, 0x02},
-		 0x66,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x0f, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-		 0x10, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-		 0x0e, 0x00, 0x0f, 0x08},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0a, 0x00,
-		 0xff}
-	},
-/* MD_11 */
-	{
-		0x50, 0x1d, 0x10, 0xa000,
-		{0x01, 0x0f, 0x00, 0x06},
-		 0xe3,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0x0b, 0x3e,
-		 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0xe9, 0x8b, 0xdf, 0x28, 0x00, 0xe7, 0x04, 0xc3,
-		 0xff},
-		{0x00, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
-		 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
-		 0x01, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x01,
-		 0xff}
-	},
-/* ExtEGATable */
-	{
-		0x50, 0x1d, 0x10, 0xa000,
-		{0x01, 0x0f, 0x00, 0x06},
-		 0xe3,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0x0b, 0x3e,
-		 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0xe9, 0x8b, 0xdf, 0x28, 0x00, 0xe7, 0x04, 0xe3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-		 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
-		 0x01, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f,
-		 0xff}
-	},
-/* MD_13 */
-	{
-		0x28, 0x18, 0x08, 0x2000,
-		{0x01, 0x0f, 0x00, 0x0e},
-		 0x63,
-		{0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f,
-		 0x00, 0x41, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-		 0x9c, 0x8e, 0x8f, 0x28, 0x40, 0x96, 0xb9, 0xa3,
-		 0xff},
-		{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-		 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
-		 0x41, 0x00, 0x0f, 0x00},
-		{0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f,
-		 0xff}
-	}
+	0x00, 0x00, 0x00, 0x0000,
+	{0x01, 0x0f, 0x00, 0x0e},
+	 0x23,
+	{0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e,
+	 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	 0xea, 0x8c, 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3,
+	 0xff},
+	{0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+	 0x01, 0x00, 0x00, 0x00},
+	{0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f,
+	 0xff}
 };
 
 static struct XGI_TimingHStruct XGI_TimingH[1];
@@ -1143,7 +626,7 @@ static struct XGI330_LCDDataStruct  XGI_NoScalingDatax75[] = {
 	{1, 1, 1688, 806,  1688, 806}   /* ; 0A (1280x768x75Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768Data[] = {
+static struct XGI_LCDDesStruct XGI_ExtLCDDes1024x768Data[] = {
 	{9, 1057, 0,   771}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1057, 0,   771}, /* ; 01 (320x350,640x350) */
 	{9, 1057, 0,   771}, /* ; 02 (360x400,720x400) */
@@ -1153,7 +636,7 @@ static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768Data[] = {
 	{9, 1057, 805, 770}  /* ; 06 (1024x768x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768Data[] = {
+static struct XGI_LCDDesStruct XGI_StLCDDes1024x768Data[] = {
 	{9, 1057, 737, 703}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1057, 686, 651}, /* ; 01 (320x350,640x350) */
 	{9, 1057, 737, 703}, /* ; 02 (360x400,720x400) */
@@ -1163,7 +646,7 @@ static struct XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768Data[] = {
 	{9, 1057, 805, 770}  /* ; 06 (1024x768x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1024x768Data[] = {
 	{1152, 856,  622, 587}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{1152, 856,  597, 562}, /* ; 01 (320x350,640x350) */
 	{1152, 856,  622, 587}, /* ; 02 (360x400,720x400) */
@@ -1173,7 +656,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768Data[] = {
 	{0,    1048, 805, 770}  /* ; 06 (1024x768x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_ExtLCDDLDes1280x1024Data[] = {
 	{18, 1346, 981,  940},  /* 00 (320x200,320x400,640x200,640x400) */
 	{18, 1346, 926,  865},  /* 01 (320x350,640x350) */
 	{18, 1346, 981,  940},  /* 02 (360x400,720x400) */
@@ -1184,7 +667,7 @@ static struct XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[] = {
 	{18, 1346, 1065, 1024}  /* 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_StLCDDLDes1280x1024Data[] = {
 	{18, 1346, 970,  907},  /* 00 (320x200,320x400,640x200,640x400) */
 	{18, 1346, 917,  854},  /* 01 (320x350,640x350) */
 	{18, 1346, 970,  907},  /* 02 (360x400,720x400) */
@@ -1195,7 +678,7 @@ static struct XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[] = {
 	{18, 1346, 1065, 1024}  /* 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDLDes1280x1024Data[] = {
 	{1368, 1008, 752,  711}, /* 00 (320x200,320x400,640x200,640x400) */
 	{1368, 1008, 729,  688}, /* 01 (320x350,640x350) */
 	{1368, 1008, 752,  711}, /* 02 (360x400,720x400) */
@@ -1206,7 +689,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024Data[] = {
 	{18,   1346, 1065, 1024} /* 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_ExtLCDDes1280x1024Data[] = {
 	{9, 1337, 981,  940},  /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1337, 926,  884},  /* ; 01 (320x350,640x350) alan, 2003/09/30 */
 	{9, 1337, 981,  940},  /* ; 02 (360x400,720x400) */
@@ -1217,7 +700,7 @@ static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024Data[] = {
 	{9, 1337, 1065, 1024}  /* ; 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_StLCDDes1280x1024Data[] = {
 	{9, 1337, 970,  907},  /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1337, 917,  854},  /* ; 01 (320x350,640x350) */
 	{9, 1337, 970,  907},  /* ; 02 (360x400,720x400) */
@@ -1228,7 +711,7 @@ static struct XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024Data[] = {
 	{9, 1337, 1065, 1024}  /* ; 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1280x1024Data[] = {
 	{1368, 1008, 752,  711}, /* 00 (320x200,320x400,640x200,640x400) */
 	{1368, 1008, 729,  688}, /* 01 (320x350,640x350) */
 	{1368, 1008, 752,  711}, /* 02 (360x400,720x400) */
@@ -1239,7 +722,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024Data[] = {
 	{9,    1337, 1065, 1024} /* 07 (1280x1024x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1400x1050[] = {
+static struct XGI_LCDDesStruct xgifb_lcddldes_1400x1050[] = {
 	{18,   1464, 0,    1051}, /* 00 (320x200,320x400,640x200,640x400) */
 	{18,   1464, 0,    1051}, /* 01 (320x350,640x350) */
 	{18,   1464, 0,    1051}, /* 02 (360x400,720x400) */
@@ -1251,7 +734,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1400x1050[] = {
 	{18,   1464, 0,    1051}  /* 08 (1400x1050x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct xgifb_lcddes_1400x1050[] = {
+static struct XGI_LCDDesStruct xgifb_lcddes_1400x1050[] = {
 	{9,    1455, 0,    1051}, /* 00 (320x200,320x400,640x200,640x400) */
 	{9,    1455, 0,    1051}, /* 01 (320x350,640x350) */
 	{9,    1455, 0,    1051}, /* 02 (360x400,720x400) */
@@ -1263,7 +746,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddes_1400x1050[] = {
 	{9,    1455, 0,    1051}  /* 08 (1400x1050x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1400x1050Data[] = {
 	{1308, 1068, 781,  766},  /* 00 (320x200,320x400,640x200,640x400) */
 	{1308, 1068, 781,  766},  /* 01 (320x350,640x350) */
 	{1308, 1068, 781,  766},  /* 02 (360x400,720x400) */
@@ -1275,7 +758,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data[] = {
 	{18,   1464, 0,    1051}  /* 08 (1400x1050x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data2[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1400x1050Data2[] = {
 	{0, 1448, 0, 1051}, /* 00 (320x200,320x400,640x200,640x400) */
 	{0, 1448, 0, 1051}, /* 01 (320x350,640x350) */
 	{0, 1448, 0, 1051}, /* 02 (360x400,720x400) */
@@ -1283,7 +766,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data2[] = {
 	{0, 1448, 0, 1051}  /* 04 (640x480x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1600x1200Data[] = {
+static struct XGI_LCDDesStruct XGI_ExtLCDDLDes1600x1200Data[] = {
 	{18, 1682, 0, 1201}, /* 00 (320x200,320x400,640x200,640x400) */
 	{18, 1682, 0, 1201}, /* 01 (320x350,640x350) */
 	{18, 1682, 0, 1201}, /* 02 (360x400,720x400) */
@@ -1296,7 +779,7 @@ static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1600x1200Data[] = {
 	{18, 1682, 0, 1201}  /* 09 (1600x1200x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_StLCDDLDes1600x1200Data[] = {
+static struct XGI_LCDDesStruct XGI_StLCDDLDes1600x1200Data[] = {
 	{18, 1682, 1150, 1101}, /* 00 (320x200,320x400,640x200,640x400) */
 	{18, 1682, 1083, 1034}, /* 01 (320x350,640x350) */
 	{18, 1682, 1150, 1101}, /* 02 (360x400,720x400) */
@@ -1309,7 +792,7 @@ static struct XGI330_LCDDataDesStruct  XGI_StLCDDLDes1600x1200Data[] = {
 	{18, 1682, 0,    1201} /* 09 (1600x1200x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1600x1200Data[] = {
+static struct XGI_LCDDesStruct XGI_ExtLCDDes1600x1200Data[] = {
 	{9, 1673, 0, 1201}, /* 00 (320x200,320x400,640x200,640x400) */
 	{9, 1673, 0, 1201}, /* 01 (320x350,640x350) */
 	{9, 1673, 0, 1201}, /* 02 (360x400,720x400) */
@@ -1322,7 +805,7 @@ static struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1600x1200Data[] = {
 	{9, 1673, 0, 1201}  /* 09 (1600x1200x60Hz) */
 };
 
-static struct XGI330_LCDDataDesStruct  XGI_StLCDDes1600x1200Data[] = {
+static struct XGI_LCDDesStruct XGI_StLCDDes1600x1200Data[] = {
 	{9, 1673, 1150, 1101}, /* 00 (320x200,320x400,640x200,640x400) */
 	{9, 1673, 1083, 1034}, /* 01 (320x350,640x350) */
 	{9, 1673, 1150, 1101}, /* 02 (360x400,720x400) */
@@ -1352,7 +835,7 @@ static struct XGI330_LCDDataDesStruct2  XGI_NoScalingDesData[] = {
 };
 
 /* ;;1024x768x75Hz */
-static struct XGI330_LCDDataDesStruct xgifb_lcddes_1024x768x75[] = {
+static struct XGI_LCDDesStruct xgifb_lcddes_1024x768x75[] = {
 	{9, 1049, 0, 769}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1049, 0, 769}, /* ; 01 (320x350,640x350) */
 	{9, 1049, 0, 769}, /* ; 02 (360x400,720x400) */
@@ -1363,7 +846,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddes_1024x768x75[] = {
 };
 
 /* ;;1024x768x75Hz */
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768x75Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1024x768x75Data[] = {
 	{1152, 856,  622, 587}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{1152, 856,  597, 562}, /* ; 01 (320x350,640x350) */
 	{1192, 896,  622, 587}, /* ; 02 (360x400,720x400) */
@@ -1374,7 +857,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768x75Data[] = {
 };
 
 /* ;;1280x1024x75Hz */
-static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1280x1024x75[] = {
+static struct XGI_LCDDesStruct xgifb_lcddldes_1280x1024x75[] = {
 	{18, 1314, 0, 1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{18, 1314, 0, 1025}, /* ; 01 (320x350,640x350) */
 	{18, 1314, 0, 1025}, /* ; 02 (360x400,720x400) */
@@ -1386,7 +869,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddldes_1280x1024x75[] = {
 };
 
 /* 1280x1024x75Hz */
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024x75Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDLDes1280x1024x75Data[] = {
 	{1368, 1008, 752, 711}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{1368, 1008, 729, 688}, /* ; 01 (320x350,640x350) */
 	{1408, 1048, 752, 711}, /* ; 02 (360x400,720x400) */
@@ -1398,7 +881,7 @@ static struct XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024x75Data[] = {
 };
 
 /* ;;1280x1024x75Hz */
-static struct XGI330_LCDDataDesStruct xgifb_lcddes_1280x1024x75[] = {
+static struct XGI_LCDDesStruct xgifb_lcddes_1280x1024x75[] = {
 	{9, 1305, 0, 1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{9, 1305, 0, 1025}, /* ; 01 (320x350,640x350) */
 	{9, 1305, 0, 1025}, /* ; 02 (360x400,720x400) */
@@ -1410,7 +893,7 @@ static struct XGI330_LCDDataDesStruct xgifb_lcddes_1280x1024x75[] = {
 };
 
 /* 1280x1024x75Hz */
-static struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024x75Data[] = {
+static struct XGI_LCDDesStruct XGI_CetLCDDes1280x1024x75Data[] = {
 	{1368, 1008, 752, 711}, /* ; 00 (320x200,320x400,640x200,640x400) */
 	{1368, 1008, 729, 688}, /* ; 01 (320x350,640x350) */
 	{1408, 1048, 752, 711}, /* ; 02 (360x400,720x400) */
diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h
index a7208e315815..30cdd1af81f1 100644
--- a/drivers/staging/xgifb/vgatypes.h
+++ b/drivers/staging/xgifb/vgatypes.h
@@ -66,8 +66,6 @@ struct xgi_hw_device_info {
 	unsigned long ulVideoMemorySize; /* size, in bytes, of the
 					    memory on the board */
 
-	unsigned char *pjIOAddress; /* base I/O address of VGA ports (0x3B0) */
-
 	unsigned char jChipType; /* Used to Identify Graphics Chip */
 				 /* defined in the data structure type  */
 				 /* "XGI_CHIP_TYPE" */
diff --git a/drivers/staging/zsmalloc/zsmalloc-main.c b/drivers/staging/zsmalloc/zsmalloc-main.c
index 917461c66014..449673773286 100644
--- a/drivers/staging/zsmalloc/zsmalloc-main.c
+++ b/drivers/staging/zsmalloc/zsmalloc-main.c
@@ -45,12 +45,12 @@ static DEFINE_PER_CPU(struct mapping_area, zs_map_area);
 
 static int is_first_page(struct page *page)
 {
-	return test_bit(PG_private, &page->flags);
+	return PagePrivate(page);
 }
 
 static int is_last_page(struct page *page)
 {
-	return test_bit(PG_private_2, &page->flags);
+	return PagePrivate2(page);
 }
 
 static void get_zspage_mapping(struct page *page, unsigned int *class_idx,
@@ -180,7 +180,7 @@ out:
  * link together 3 PAGE_SIZE sized pages to form a zspage
  * since then we can perfectly fit in 8 such objects.
  */
-static int get_zspage_order(int class_size)
+static int get_pages_per_zspage(int class_size)
 {
 	int i, max_usedpc = 0;
 	/* zspage order which gives maximum used size per KB */
@@ -368,7 +368,7 @@ static struct page *alloc_zspage(struct size_class *class, gfp_t flags)
 	 * identify the last page.
 	 */
 	error = -ENOMEM;
-	for (i = 0; i < class->zspage_order; i++) {
+	for (i = 0; i < class->pages_per_zspage; i++) {
 		struct page *page, *prev_page;
 
 		page = alloc_page(flags);
@@ -377,7 +377,7 @@ static struct page *alloc_zspage(struct size_class *class, gfp_t flags)
 
 		INIT_LIST_HEAD(&page->lru);
 		if (i == 0) {	/* first page */
-			set_bit(PG_private, &page->flags);
+			SetPagePrivate(page);
 			set_page_private(page, 0);
 			first_page = page;
 			first_page->inuse = 0;
@@ -388,9 +388,8 @@ static struct page *alloc_zspage(struct size_class *class, gfp_t flags)
 			page->first_page = first_page;
 		if (i >= 2)
 			list_add(&page->lru, &prev_page->lru);
-		if (i == class->zspage_order - 1)	/* last page */
-			set_bit(PG_private_2, &page->flags);
-
+		if (i == class->pages_per_zspage - 1)	/* last page */
+			SetPagePrivate2(page);
 		prev_page = page;
 	}
 
@@ -398,7 +397,7 @@ static struct page *alloc_zspage(struct size_class *class, gfp_t flags)
 
 	first_page->freelist = obj_location_to_handle(first_page, 0);
 	/* Maximum number of objects we can store in this zspage */
-	first_page->objects = class->zspage_order * PAGE_SIZE / class->size;
+	first_page->objects = class->pages_per_zspage * PAGE_SIZE / class->size;
 
 	error = 0; /* Success */
 
@@ -513,7 +512,7 @@ struct zs_pool *zs_create_pool(const char *name, gfp_t flags)
 		class->size = size;
 		class->index = i;
 		spin_lock_init(&class->lock);
-		class->zspage_order = get_zspage_order(size);
+		class->pages_per_zspage = get_pages_per_zspage(size);
 
 	}
 
@@ -567,13 +566,9 @@ EXPORT_SYMBOL_GPL(zs_destroy_pool);
  * zs_malloc - Allocate block of given size from pool.
  * @pool: pool to allocate from
  * @size: size of block to allocate
- * @page: page no. that holds the object
- * @offset: location of object within page
- *
- * On success, <page, offset> identifies block allocated
- * and 0 is returned. On failure, <page, offset> is set to
- * 0 and -ENOMEM is returned.
  *
+ * On success, handle to the allocated object is returned,
+ * otherwise NULL.
  * Allocation requests with size > ZS_MAX_ALLOC_SIZE will fail.
  */
 void *zs_malloc(struct zs_pool *pool, size_t size)
@@ -604,7 +599,7 @@ void *zs_malloc(struct zs_pool *pool, size_t size)
 
 		set_zspage_mapping(first_page, class->index, ZS_EMPTY);
 		spin_lock(&class->lock);
-		class->pages_allocated += class->zspage_order;
+		class->pages_allocated += class->pages_per_zspage;
 	}
 
 	obj = first_page->freelist;
@@ -659,7 +654,7 @@ void zs_free(struct zs_pool *pool, void *obj)
 	fullness = fix_fullness_group(pool, first_page);
 
 	if (fullness == ZS_EMPTY)
-		class->pages_allocated -= class->zspage_order;
+		class->pages_allocated -= class->pages_per_zspage;
 
 	spin_unlock(&class->lock);
 
@@ -668,6 +663,15 @@ void zs_free(struct zs_pool *pool, void *obj)
 }
 EXPORT_SYMBOL_GPL(zs_free);
 
+/**
+ * zs_map_object - get address of allocated object from handle.
+ * @pool: pool from which the object was allocated
+ * @handle: handle returned from zs_malloc
+ *
+ * Before using an object allocated from zs_malloc, it must be mapped using
+ * this function. When done with the object, it must be unmapped using
+ * zs_unmap_object
+*/
 void *zs_map_object(struct zs_pool *pool, void *handle)
 {
 	struct page *page;
diff --git a/drivers/staging/zsmalloc/zsmalloc_int.h b/drivers/staging/zsmalloc/zsmalloc_int.h
index 92eefc663afc..6fd32a9e0315 100644
--- a/drivers/staging/zsmalloc/zsmalloc_int.h
+++ b/drivers/staging/zsmalloc/zsmalloc_int.h
@@ -124,7 +124,7 @@ struct size_class {
 	unsigned int index;
 
 	/* Number of PAGE_SIZE sized pages to combine to form a 'zspage' */
-	int zspage_order;
+	int pages_per_zspage;
 
 	spinlock_t lock;
 
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 6cc4358f68c1..35819e312624 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1033,7 +1033,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state,
 	if (!retinfo)
 		return -EFAULT;
 	memset(&tmp, 0, sizeof(tmp));
-	tty_lock();
+	tty_lock(tty);
 	tmp.line = tty->index;
 	tmp.port = state->port;
 	tmp.flags = state->tport.flags;
@@ -1042,7 +1042,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state,
 	tmp.close_delay = state->tport.close_delay;
 	tmp.closing_wait = state->tport.closing_wait;
 	tmp.custom_divisor = state->custom_divisor;
-	tty_unlock();
+	tty_unlock(tty);
 	if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
 		return -EFAULT;
 	return 0;
@@ -1059,12 +1059,12 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
 	if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
 		return -EFAULT;
 
-	tty_lock();
+	tty_lock(tty);
 	change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) ||
 		new_serial.custom_divisor != state->custom_divisor;
 	if (new_serial.irq || new_serial.port != state->port ||
 			new_serial.xmit_fifo_size != state->xmit_fifo_size) {
-		tty_unlock();
+		tty_unlock(tty);
 		return -EINVAL;
 	}
   
@@ -1074,7 +1074,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
 		    (new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
 		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
 		     (port->flags & ~ASYNC_USR_MASK))) {
-			tty_unlock();
+			tty_unlock(tty);
 			return -EPERM;
 		}
 		port->flags = ((port->flags & ~ASYNC_USR_MASK) |
@@ -1084,7 +1084,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
 	}
 
 	if (new_serial.baud_base < 9600) {
-		tty_unlock();
+		tty_unlock(tty);
 		return -EINVAL;
 	}
 
@@ -1116,7 +1116,7 @@ check_and_exit:
 		}
 	} else
 		retval = startup(tty, state);
-	tty_unlock();
+	tty_unlock(tty);
 	return retval;
 }
 
diff --git a/drivers/tty/bfin_jtag_comm.c b/drivers/tty/bfin_jtag_comm.c
index 946f799861f5..61fc74fe1747 100644
--- a/drivers/tty/bfin_jtag_comm.c
+++ b/drivers/tty/bfin_jtag_comm.c
@@ -62,9 +62,7 @@ static inline uint32_t bfin_write_emudat_chars(char a, char b, char c, char d)
 
 static struct tty_driver *bfin_jc_driver;
 static struct task_struct *bfin_jc_kthread;
-static struct tty_struct * volatile bfin_jc_tty;
-static unsigned long bfin_jc_count;
-static DEFINE_MUTEX(bfin_jc_tty_mutex);
+static struct tty_port port;
 static volatile struct circ_buf bfin_jc_write_buf;
 
 static int
@@ -73,18 +71,21 @@ bfin_jc_emudat_manager(void *arg)
 	uint32_t inbound_len = 0, outbound_len = 0;
 
 	while (!kthread_should_stop()) {
+		struct tty_struct *tty = tty_port_tty_get(&port);
 		/* no one left to give data to, so sleep */
-		if (bfin_jc_tty == NULL && circ_empty(&bfin_jc_write_buf)) {
+		if (tty == NULL && circ_empty(&bfin_jc_write_buf)) {
 			pr_debug("waiting for readers\n");
 			__set_current_state(TASK_UNINTERRUPTIBLE);
 			schedule();
 			__set_current_state(TASK_RUNNING);
+			continue;
 		}
 
 		/* no data available, so just chill */
 		if (!(bfin_read_DBGSTAT() & EMUDIF) && circ_empty(&bfin_jc_write_buf)) {
 			pr_debug("waiting for data (in_len = %i) (circ: %i %i)\n",
 				inbound_len, bfin_jc_write_buf.tail, bfin_jc_write_buf.head);
+			tty_kref_put(tty);
 			if (inbound_len)
 				schedule();
 			else
@@ -94,9 +95,6 @@ bfin_jc_emudat_manager(void *arg)
 
 		/* if incoming data is ready, eat it */
 		if (bfin_read_DBGSTAT() & EMUDIF) {
-			struct tty_struct *tty;
-			mutex_lock(&bfin_jc_tty_mutex);
-			tty = (struct tty_struct *)bfin_jc_tty;
 			if (tty != NULL) {
 				uint32_t emudat = bfin_read_emudat();
 				if (inbound_len == 0) {
@@ -110,7 +108,6 @@ bfin_jc_emudat_manager(void *arg)
 					tty_flip_buffer_push(tty);
 				}
 			}
-			mutex_unlock(&bfin_jc_tty_mutex);
 		}
 
 		/* if outgoing data is ready, post it */
@@ -120,7 +117,6 @@ bfin_jc_emudat_manager(void *arg)
 				bfin_write_emudat(outbound_len);
 				pr_debug("outgoing length: 0x%08x\n", outbound_len);
 			} else {
-				struct tty_struct *tty;
 				int tail = bfin_jc_write_buf.tail;
 				size_t ate = (4 <= outbound_len ? 4 : outbound_len);
 				uint32_t emudat =
@@ -132,14 +128,12 @@ bfin_jc_emudat_manager(void *arg)
 				);
 				bfin_jc_write_buf.tail += ate;
 				outbound_len -= ate;
-				mutex_lock(&bfin_jc_tty_mutex);
-				tty = (struct tty_struct *)bfin_jc_tty;
 				if (tty)
 					tty_wakeup(tty);
-				mutex_unlock(&bfin_jc_tty_mutex);
 				pr_debug("  outgoing data: 0x%08x (pushing %zu)\n", emudat, ate);
 			}
 		}
+		tty_kref_put(tty);
 	}
 
 	__set_current_state(TASK_RUNNING);
@@ -149,24 +143,28 @@ bfin_jc_emudat_manager(void *arg)
 static int
 bfin_jc_open(struct tty_struct *tty, struct file *filp)
 {
-	mutex_lock(&bfin_jc_tty_mutex);
-	pr_debug("open %lu\n", bfin_jc_count);
-	++bfin_jc_count;
-	bfin_jc_tty = tty;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port.lock, flags);
+	port.count++;
+	spin_unlock_irqrestore(&port.lock, flags);
+	tty_port_tty_set(&port, tty);
 	wake_up_process(bfin_jc_kthread);
-	mutex_unlock(&bfin_jc_tty_mutex);
 	return 0;
 }
 
 static void
 bfin_jc_close(struct tty_struct *tty, struct file *filp)
 {
-	mutex_lock(&bfin_jc_tty_mutex);
-	pr_debug("close %lu\n", bfin_jc_count);
-	if (--bfin_jc_count == 0)
-		bfin_jc_tty = NULL;
+	unsigned long flags;
+	bool last;
+
+	spin_lock_irqsave(&port.lock, flags);
+	last = --port.count == 0;
+	spin_unlock_irqrestore(&port.lock, flags);
+	if (last)
+		tty_port_tty_set(&port, NULL);
 	wake_up_process(bfin_jc_kthread);
-	mutex_unlock(&bfin_jc_tty_mutex);
 }
 
 /* XXX: we dont handle the put_char() case where we must handle count = 1 */
@@ -242,6 +240,8 @@ static int __init bfin_jc_init(void)
 {
 	int ret;
 
+	tty_port_init(&port);
+
 	bfin_jc_kthread = kthread_create(bfin_jc_emudat_manager, NULL, DRV_NAME);
 	if (IS_ERR(bfin_jc_kthread))
 		return PTR_ERR(bfin_jc_kthread);
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index e61cabdd69df..6984e1a2686a 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1599,7 +1599,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
 	 * If the port is the middle of closing, bail out now
 	 */
 	if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
-		wait_event_interruptible_tty(info->port.close_wait,
+		wait_event_interruptible_tty(tty, info->port.close_wait,
 				!(info->port.flags & ASYNC_CLOSING));
 		return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
 	}
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 8880adf5fc6f..2d691eb7c40a 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -107,7 +107,7 @@ static struct hvc_struct *hvc_get_by_index(int index)
 	list_for_each_entry(hp, &hvc_structs, next) {
 		spin_lock_irqsave(&hp->lock, flags);
 		if (hp->index == index) {
-			kref_get(&hp->kref);
+			tty_port_get(&hp->port);
 			spin_unlock_irqrestore(&hp->lock, flags);
 			spin_unlock(&hvc_structs_lock);
 			return hp;
@@ -229,9 +229,9 @@ static int __init hvc_console_init(void)
 console_initcall(hvc_console_init);
 
 /* callback when the kboject ref count reaches zero. */
-static void destroy_hvc_struct(struct kref *kref)
+static void hvc_port_destruct(struct tty_port *port)
 {
-	struct hvc_struct *hp = container_of(kref, struct hvc_struct, kref);
+	struct hvc_struct *hp = container_of(port, struct hvc_struct, port);
 	unsigned long flags;
 
 	spin_lock(&hvc_structs_lock);
@@ -264,7 +264,7 @@ int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops)
 	/* make sure no no tty has been registered in this index */
 	hp = hvc_get_by_index(index);
 	if (hp) {
-		kref_put(&hp->kref, destroy_hvc_struct);
+		tty_port_put(&hp->port);
 		return -1;
 	}
 
@@ -313,20 +313,17 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	if (!(hp = hvc_get_by_index(tty->index)))
 		return -ENODEV;
 
-	spin_lock_irqsave(&hp->lock, flags);
+	spin_lock_irqsave(&hp->port.lock, flags);
 	/* Check and then increment for fast path open. */
-	if (hp->count++ > 0) {
-		tty_kref_get(tty);
-		spin_unlock_irqrestore(&hp->lock, flags);
+	if (hp->port.count++ > 0) {
+		spin_unlock_irqrestore(&hp->port.lock, flags);
 		hvc_kick();
 		return 0;
 	} /* else count == 0 */
+	spin_unlock_irqrestore(&hp->port.lock, flags);
 
 	tty->driver_data = hp;
-
-	hp->tty = tty_kref_get(tty);
-
-	spin_unlock_irqrestore(&hp->lock, flags);
+	tty_port_tty_set(&hp->port, tty);
 
 	if (hp->ops->notifier_add)
 		rc = hp->ops->notifier_add(hp, hp->data);
@@ -338,12 +335,9 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	 * tty fields and return the kref reference.
 	 */
 	if (rc) {
-		spin_lock_irqsave(&hp->lock, flags);
-		hp->tty = NULL;
-		spin_unlock_irqrestore(&hp->lock, flags);
-		tty_kref_put(tty);
+		tty_port_tty_set(&hp->port, NULL);
 		tty->driver_data = NULL;
-		kref_put(&hp->kref, destroy_hvc_struct);
+		tty_port_put(&hp->port);
 		printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
 	}
 	/* Force wakeup of the polling thread */
@@ -370,12 +364,12 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 
 	hp = tty->driver_data;
 
-	spin_lock_irqsave(&hp->lock, flags);
+	spin_lock_irqsave(&hp->port.lock, flags);
 
-	if (--hp->count == 0) {
+	if (--hp->port.count == 0) {
+		spin_unlock_irqrestore(&hp->port.lock, flags);
 		/* We are done with the tty pointer now. */
-		hp->tty = NULL;
-		spin_unlock_irqrestore(&hp->lock, flags);
+		tty_port_tty_set(&hp->port, NULL);
 
 		if (hp->ops->notifier_del)
 			hp->ops->notifier_del(hp, hp->data);
@@ -390,14 +384,13 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 		 */
 		tty_wait_until_sent_from_close(tty, HVC_CLOSE_WAIT);
 	} else {
-		if (hp->count < 0)
+		if (hp->port.count < 0)
 			printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
-				hp->vtermno, hp->count);
-		spin_unlock_irqrestore(&hp->lock, flags);
+				hp->vtermno, hp->port.count);
+		spin_unlock_irqrestore(&hp->port.lock, flags);
 	}
 
-	tty_kref_put(tty);
-	kref_put(&hp->kref, destroy_hvc_struct);
+	tty_port_put(&hp->port);
 }
 
 static void hvc_hangup(struct tty_struct *tty)
@@ -412,32 +405,31 @@ static void hvc_hangup(struct tty_struct *tty)
 	/* cancel pending tty resize work */
 	cancel_work_sync(&hp->tty_resize);
 
-	spin_lock_irqsave(&hp->lock, flags);
+	spin_lock_irqsave(&hp->port.lock, flags);
 
 	/*
 	 * The N_TTY line discipline has problems such that in a close vs
 	 * open->hangup case this can be called after the final close so prevent
 	 * that from happening for now.
 	 */
-	if (hp->count <= 0) {
-		spin_unlock_irqrestore(&hp->lock, flags);
+	if (hp->port.count <= 0) {
+		spin_unlock_irqrestore(&hp->port.lock, flags);
 		return;
 	}
 
-	temp_open_count = hp->count;
-	hp->count = 0;
-	hp->n_outbuf = 0;
-	hp->tty = NULL;
+	temp_open_count = hp->port.count;
+	hp->port.count = 0;
+	spin_unlock_irqrestore(&hp->port.lock, flags);
+	tty_port_tty_set(&hp->port, NULL);
 
-	spin_unlock_irqrestore(&hp->lock, flags);
+	hp->n_outbuf = 0;
 
 	if (hp->ops->notifier_hangup)
 		hp->ops->notifier_hangup(hp, hp->data);
 
 	while(temp_open_count) {
 		--temp_open_count;
-		tty_kref_put(tty);
-		kref_put(&hp->kref, destroy_hvc_struct);
+		tty_port_put(&hp->port);
 	}
 }
 
@@ -478,7 +470,8 @@ static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count
 	if (!hp)
 		return -EPIPE;
 
-	if (hp->count <= 0)
+	/* FIXME what's this (unprotected) check for? */
+	if (hp->port.count <= 0)
 		return -EIO;
 
 	spin_lock_irqsave(&hp->lock, flags);
@@ -526,13 +519,12 @@ static void hvc_set_winsz(struct work_struct *work)
 
 	hp = container_of(work, struct hvc_struct, tty_resize);
 
-	spin_lock_irqsave(&hp->lock, hvc_flags);
-	if (!hp->tty) {
-		spin_unlock_irqrestore(&hp->lock, hvc_flags);
+	tty = tty_port_tty_get(&hp->port);
+	if (!tty)
 		return;
-	}
-	ws  = hp->ws;
-	tty = tty_kref_get(hp->tty);
+
+	spin_lock_irqsave(&hp->lock, hvc_flags);
+	ws = hp->ws;
 	spin_unlock_irqrestore(&hp->lock, hvc_flags);
 
 	tty_do_resize(tty, &ws);
@@ -601,7 +593,7 @@ int hvc_poll(struct hvc_struct *hp)
 	}
 
 	/* No tty attached, just skip */
-	tty = tty_kref_get(hp->tty);
+	tty = tty_port_tty_get(&hp->port);
 	if (tty == NULL)
 		goto bail;
 
@@ -681,8 +673,7 @@ int hvc_poll(struct hvc_struct *hp)
 
 		tty_flip_buffer_push(tty);
 	}
-	if (tty)
-		tty_kref_put(tty);
+	tty_kref_put(tty);
 
 	return poll_mask;
 }
@@ -817,6 +808,10 @@ static const struct tty_operations hvc_ops = {
 #endif
 };
 
+static const struct tty_port_operations hvc_port_ops = {
+	.destruct = hvc_port_destruct,
+};
+
 struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
 			     const struct hv_ops *ops,
 			     int outbuf_size)
@@ -842,7 +837,8 @@ struct hvc_struct *hvc_alloc(uint32_t vtermno, int data,
 	hp->outbuf_size = outbuf_size;
 	hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))];
 
-	kref_init(&hp->kref);
+	tty_port_init(&hp->port);
+	hp->port.ops = &hvc_port_ops;
 
 	INIT_WORK(&hp->tty_resize, hvc_set_winsz);
 	spin_lock_init(&hp->lock);
@@ -875,9 +871,9 @@ int hvc_remove(struct hvc_struct *hp)
 	unsigned long flags;
 	struct tty_struct *tty;
 
-	spin_lock_irqsave(&hp->lock, flags);
-	tty = tty_kref_get(hp->tty);
+	tty = tty_port_tty_get(&hp->port);
 
+	spin_lock_irqsave(&hp->lock, flags);
 	if (hp->index < MAX_NR_HVC_CONSOLES)
 		vtermnos[hp->index] = -1;
 
@@ -891,7 +887,7 @@ int hvc_remove(struct hvc_struct *hp)
 	 * kref cause it to be removed, which will probably be the tty_vhangup
 	 * below.
 	 */
-	kref_put(&hp->kref, destroy_hvc_struct);
+	tty_port_put(&hp->port);
 
 	/*
 	 * This function call will auto chain call hvc_hangup.
diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h
index c335a1492a54..674d23cb919a 100644
--- a/drivers/tty/hvc/hvc_console.h
+++ b/drivers/tty/hvc/hvc_console.h
@@ -46,10 +46,9 @@
 #define HVC_ALLOC_TTY_ADAPTERS	8
 
 struct hvc_struct {
+	struct tty_port port;
 	spinlock_t lock;
 	int index;
-	struct tty_struct *tty;
-	int count;
 	int do_wakeup;
 	char *outbuf;
 	int outbuf_size;
@@ -61,7 +60,6 @@ struct hvc_struct {
 	struct winsize ws;
 	struct work_struct tty_resize;
 	struct list_head next;
-	struct kref kref; /* ref count & hvc_struct lifetime */
 };
 
 /* implemented by a low level driver */
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 83d5c88e7165..d3d91dae065c 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -430,9 +430,9 @@ static int __devinit xencons_probe(struct xenbus_device *dev,
 	if (devid == 0)
 		return -ENODEV;
 
-	info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO);
+	info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL);
 	if (!info)
-		goto error_nomem;
+		return -ENOMEM;
 	dev_set_drvdata(&dev->dev, info);
 	info->xbdev = dev;
 	info->vtermno = xenbus_devid_to_vtermno(devid);
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 3436436fe2d7..d56788c83974 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -261,6 +261,7 @@ static DEFINE_SPINLOCK(hvcs_pi_lock);
 
 /* One vty-server per hvcs_struct */
 struct hvcs_struct {
+	struct tty_port port;
 	spinlock_t lock;
 
 	/*
@@ -269,9 +270,6 @@ struct hvcs_struct {
 	 */
 	unsigned int index;
 
-	struct tty_struct *tty;
-	int open_count;
-
 	/*
 	 * Used to tell the driver kernel_thread what operations need to take
 	 * place upon this hvcs_struct instance.
@@ -290,12 +288,11 @@ struct hvcs_struct {
 	int chars_in_buffer;
 
 	/*
-	 * Any variable below the kref is valid before a tty is connected and
+	 * Any variable below is valid before a tty is connected and
 	 * stays valid after the tty is disconnected.  These shouldn't be
 	 * whacked until the kobject refcount reaches zero though some entries
 	 * may be changed via sysfs initiatives.
 	 */
-	struct kref kref; /* ref count & hvcs_struct lifetime */
 	int connected; /* is the vty-server currently connected to a vty? */
 	uint32_t p_unit_address; /* partner unit address */
 	uint32_t p_partition_ID; /* partner partition ID */
@@ -304,9 +301,6 @@ struct hvcs_struct {
 	struct vio_dev *vdev;
 };
 
-/* Required to back map a kref to its containing object */
-#define from_kref(k) container_of(k, struct hvcs_struct, kref)
-
 static LIST_HEAD(hvcs_structs);
 static DEFINE_SPINLOCK(hvcs_structs_lock);
 static DEFINE_MUTEX(hvcs_init_mutex);
@@ -422,7 +416,7 @@ static ssize_t hvcs_vterm_state_store(struct device *dev, struct device_attribut
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
-	if (hvcsd->open_count > 0) {
+	if (hvcsd->port.count > 0) {
 		spin_unlock_irqrestore(&hvcsd->lock, flags);
 		printk(KERN_INFO "HVCS: vterm state unchanged.  "
 				"The hvcs device node is still in use.\n");
@@ -564,7 +558,7 @@ static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance)
 static void hvcs_try_write(struct hvcs_struct *hvcsd)
 {
 	uint32_t unit_address = hvcsd->vdev->unit_address;
-	struct tty_struct *tty = hvcsd->tty;
+	struct tty_struct *tty = hvcsd->port.tty;
 	int sent;
 
 	if (hvcsd->todo_mask & HVCS_TRY_WRITE) {
@@ -602,7 +596,7 @@ static int hvcs_io(struct hvcs_struct *hvcsd)
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
 	unit_address = hvcsd->vdev->unit_address;
-	tty = hvcsd->tty;
+	tty = hvcsd->port.tty;
 
 	hvcs_try_write(hvcsd);
 
@@ -701,10 +695,9 @@ static void hvcs_return_index(int index)
 		hvcs_index_list[index] = -1;
 }
 
-/* callback when the kref ref count reaches zero */
-static void destroy_hvcs_struct(struct kref *kref)
+static void hvcs_destruct_port(struct tty_port *p)
 {
-	struct hvcs_struct *hvcsd = from_kref(kref);
+	struct hvcs_struct *hvcsd = container_of(p, struct hvcs_struct, port);
 	struct vio_dev *vdev;
 	unsigned long flags;
 
@@ -741,6 +734,10 @@ static void destroy_hvcs_struct(struct kref *kref)
 	kfree(hvcsd);
 }
 
+static const struct tty_port_operations hvcs_port_ops = {
+	.destruct = hvcs_destruct_port,
+};
+
 static int hvcs_get_index(void)
 {
 	int i;
@@ -789,10 +786,9 @@ static int __devinit hvcs_probe(
 	if (!hvcsd)
 		return -ENODEV;
 
-
+	tty_port_init(&hvcsd->port);
+	hvcsd->port.ops = &hvcs_port_ops;
 	spin_lock_init(&hvcsd->lock);
-	/* Automatically incs the refcount the first time */
-	kref_init(&hvcsd->kref);
 
 	hvcsd->vdev = dev;
 	dev_set_drvdata(&dev->dev, hvcsd);
@@ -852,7 +848,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 
-	tty = hvcsd->tty;
+	tty = hvcsd->port.tty;
 
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
@@ -860,7 +856,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
 	 * Let the last holder of this object cause it to be removed, which
 	 * would probably be tty_hangup below.
 	 */
-	kref_put(&hvcsd->kref, destroy_hvcs_struct);
+	tty_port_put(&hvcsd->port);
 
 	/*
 	 * The hangup is a scheduled function which will auto chain call
@@ -1094,7 +1090,7 @@ static struct hvcs_struct *hvcs_get_by_index(int index)
 	list_for_each_entry(hvcsd, &hvcs_structs, next) {
 		spin_lock_irqsave(&hvcsd->lock, flags);
 		if (hvcsd->index == index) {
-			kref_get(&hvcsd->kref);
+			tty_port_get(&hvcsd->port);
 			spin_unlock_irqrestore(&hvcsd->lock, flags);
 			spin_unlock(&hvcs_structs_lock);
 			return hvcsd;
@@ -1138,8 +1134,8 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
 		if ((retval = hvcs_partner_connect(hvcsd)))
 			goto error_release;
 
-	hvcsd->open_count = 1;
-	hvcsd->tty = tty;
+	hvcsd->port.count = 1;
+	hvcsd->port.tty = tty;
 	tty->driver_data = hvcsd;
 
 	memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
@@ -1160,7 +1156,7 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp)
 	 * and will grab the spinlock and free the connection if it fails.
 	 */
 	if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) {
-		kref_put(&hvcsd->kref, destroy_hvcs_struct);
+		tty_port_put(&hvcsd->port);
 		printk(KERN_WARNING "HVCS: enable device failed.\n");
 		return rc;
 	}
@@ -1171,8 +1167,8 @@ fast_open:
 	hvcsd = tty->driver_data;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	kref_get(&hvcsd->kref);
-	hvcsd->open_count++;
+	tty_port_get(&hvcsd->port);
+	hvcsd->port.count++;
 	hvcsd->todo_mask |= HVCS_SCHED_READ;
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
 
@@ -1186,7 +1182,7 @@ open_success:
 
 error_release:
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
-	kref_put(&hvcsd->kref, destroy_hvcs_struct);
+	tty_port_put(&hvcsd->port);
 
 	printk(KERN_WARNING "HVCS: partner connect failed.\n");
 	return retval;
@@ -1216,7 +1212,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 	hvcsd = tty->driver_data;
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
-	if (--hvcsd->open_count == 0) {
+	if (--hvcsd->port.count == 0) {
 
 		vio_disable_interrupts(hvcsd->vdev);
 
@@ -1225,7 +1221,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 		 * execute any operations on the TTY even though it is obligated
 		 * to deliver any pending I/O to the hypervisor.
 		 */
-		hvcsd->tty = NULL;
+		hvcsd->port.tty = NULL;
 
 		irq = hvcsd->vdev->irq;
 		spin_unlock_irqrestore(&hvcsd->lock, flags);
@@ -1240,16 +1236,16 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp)
 		tty->driver_data = NULL;
 
 		free_irq(irq, hvcsd);
-		kref_put(&hvcsd->kref, destroy_hvcs_struct);
+		tty_port_put(&hvcsd->port);
 		return;
-	} else if (hvcsd->open_count < 0) {
+	} else if (hvcsd->port.count < 0) {
 		printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
 				" is missmanaged.\n",
-		hvcsd->vdev->unit_address, hvcsd->open_count);
+		hvcsd->vdev->unit_address, hvcsd->port.count);
 	}
 
 	spin_unlock_irqrestore(&hvcsd->lock, flags);
-	kref_put(&hvcsd->kref, destroy_hvcs_struct);
+	tty_port_put(&hvcsd->port);
 }
 
 static void hvcs_hangup(struct tty_struct * tty)
@@ -1261,7 +1257,7 @@ static void hvcs_hangup(struct tty_struct * tty)
 
 	spin_lock_irqsave(&hvcsd->lock, flags);
 	/* Preserve this so that we know how many kref refs to put */
-	temp_open_count = hvcsd->open_count;
+	temp_open_count = hvcsd->port.count;
 
 	/*
 	 * Don't kref put inside the spinlock because the destruction
@@ -1273,10 +1269,10 @@ static void hvcs_hangup(struct tty_struct * tty)
 	hvcsd->todo_mask = 0;
 
 	/* I don't think the tty needs the hvcs_struct pointer after a hangup */
-	hvcsd->tty->driver_data = NULL;
-	hvcsd->tty = NULL;
+	tty->driver_data = NULL;
+	hvcsd->port.tty = NULL;
 
-	hvcsd->open_count = 0;
+	hvcsd->port.count = 0;
 
 	/* This will drop any buffered data on the floor which is OK in a hangup
 	 * scenario. */
@@ -1301,7 +1297,7 @@ static void hvcs_hangup(struct tty_struct * tty)
 		 * NOTE:  If this hangup was signaled from user space then the
 		 * final put will never happen.
 		 */
-		kref_put(&hvcsd->kref, destroy_hvcs_struct);
+		tty_port_put(&hvcsd->port);
 	}
 }
 
@@ -1347,7 +1343,7 @@ static int hvcs_write(struct tty_struct *tty,
 	 * the middle of a write operation?  This is a crummy place to do this
 	 * but we want to keep it all in the spinlock.
 	 */
-	if (hvcsd->open_count <= 0) {
+	if (hvcsd->port.count <= 0) {
 		spin_unlock_irqrestore(&hvcsd->lock, flags);
 		return -ENODEV;
 	}
@@ -1421,7 +1417,7 @@ static int hvcs_write_room(struct tty_struct *tty)
 {
 	struct hvcs_struct *hvcsd = tty->driver_data;
 
-	if (!hvcsd || hvcsd->open_count <= 0)
+	if (!hvcsd || hvcsd->port.count <= 0)
 		return 0;
 
 	return HVCS_BUFF_LEN - hvcsd->chars_in_buffer;
diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index a7488b748647..6f5bc49c441f 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -69,14 +69,13 @@
 #define __ALIGNED__	__attribute__((__aligned__(sizeof(long))))
 
 struct hvsi_struct {
+	struct tty_port port;
 	struct delayed_work writer;
 	struct work_struct handshaker;
 	wait_queue_head_t emptyq; /* woken when outbuf is emptied */
 	wait_queue_head_t stateq; /* woken when HVSI state changes */
 	spinlock_t lock;
 	int index;
-	struct tty_struct *tty;
-	int count;
 	uint8_t throttle_buf[128];
 	uint8_t outbuf[N_OUTBUF]; /* to implement write_room and chars_in_buffer */
 	/* inbuf is for packet reassembly. leave a little room for leftovers. */
@@ -237,7 +236,7 @@ static int hvsi_read(struct hvsi_struct *hp, char *buf, int count)
 }
 
 static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
-	struct tty_struct **to_hangup, struct hvsi_struct **to_handshake)
+	struct tty_struct *tty, struct hvsi_struct **to_handshake)
 {
 	struct hvsi_control *header = (struct hvsi_control *)packet;
 
@@ -247,9 +246,8 @@ static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet,
 				/* CD went away; no more connection */
 				pr_debug("hvsi%i: CD dropped\n", hp->index);
 				hp->mctrl &= TIOCM_CD;
-				/* If userland hasn't done an open(2) yet, hp->tty is NULL. */
-				if (hp->tty && !(hp->tty->flags & CLOCAL))
-					*to_hangup = hp->tty;
+				if (tty && !C_CLOCAL(tty))
+					tty_hangup(tty);
 			}
 			break;
 		case VSV_CLOSE_PROTOCOL:
@@ -331,7 +329,8 @@ static void hvsi_recv_query(struct hvsi_struct *hp, uint8_t *packet)
 	}
 }
 
-static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
+static void hvsi_insert_chars(struct hvsi_struct *hp, struct tty_struct *tty,
+		const char *buf, int len)
 {
 	int i;
 
@@ -347,7 +346,7 @@ static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
 			continue;
 		}
 #endif /* CONFIG_MAGIC_SYSRQ */
-		tty_insert_flip_char(hp->tty, c, 0);
+		tty_insert_flip_char(tty, c, 0);
 	}
 }
 
@@ -360,7 +359,7 @@ static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len)
  * revisited.
  */
 #define TTY_THRESHOLD_THROTTLE 128
-static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
+static bool hvsi_recv_data(struct hvsi_struct *hp, struct tty_struct *tty,
 		const uint8_t *packet)
 {
 	const struct hvsi_header *header = (const struct hvsi_header *)packet;
@@ -371,14 +370,14 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
 	pr_debug("queueing %i chars '%.*s'\n", datalen, datalen, data);
 
 	if (datalen == 0)
-		return NULL;
+		return false;
 
 	if (overflow > 0) {
 		pr_debug("%s: got >TTY_THRESHOLD_THROTTLE bytes\n", __func__);
 		datalen = TTY_THRESHOLD_THROTTLE;
 	}
 
-	hvsi_insert_chars(hp, data, datalen);
+	hvsi_insert_chars(hp, tty, data, datalen);
 
 	if (overflow > 0) {
 		/*
@@ -390,7 +389,7 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
 		hp->n_throttle = overflow;
 	}
 
-	return hp->tty;
+	return true;
 }
 
 /*
@@ -399,14 +398,13 @@ static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp,
  * machine during console handshaking (in which case tty = NULL and we ignore
  * incoming data).
  */
-static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
-		struct tty_struct **hangup, struct hvsi_struct **handshake)
+static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct *tty,
+		struct hvsi_struct **handshake)
 {
 	uint8_t *packet = hp->inbuf;
 	int chunklen;
+	bool flip = false;
 
-	*flip = NULL;
-	*hangup = NULL;
 	*handshake = NULL;
 
 	chunklen = hvsi_read(hp, hp->inbuf_end, HVSI_MAX_READ);
@@ -440,12 +438,12 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
 			case VS_DATA_PACKET_HEADER:
 				if (!is_open(hp))
 					break;
-				if (hp->tty == NULL)
+				if (tty == NULL)
 					break; /* no tty buffer to put data in */
-				*flip = hvsi_recv_data(hp, packet);
+				flip = hvsi_recv_data(hp, tty, packet);
 				break;
 			case VS_CONTROL_PACKET_HEADER:
-				hvsi_recv_control(hp, packet, hangup, handshake);
+				hvsi_recv_control(hp, packet, tty, handshake);
 				break;
 			case VS_QUERY_RESPONSE_PACKET_HEADER:
 				hvsi_recv_response(hp, packet);
@@ -462,28 +460,26 @@ static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip,
 
 		packet += len_packet(packet);
 
-		if (*hangup || *handshake) {
-			pr_debug("%s: hangup or handshake\n", __func__);
-			/*
-			 * we need to send the hangup now before receiving any more data.
-			 * If we get "data, hangup, data", we can't deliver the second
-			 * data before the hangup.
-			 */
+		if (*handshake) {
+			pr_debug("%s: handshake\n", __func__);
 			break;
 		}
 	}
 
 	compact_inbuf(hp, packet);
 
+	if (flip)
+		tty_flip_buffer_push(tty);
+
 	return 1;
 }
 
-static void hvsi_send_overflow(struct hvsi_struct *hp)
+static void hvsi_send_overflow(struct hvsi_struct *hp, struct tty_struct *tty)
 {
 	pr_debug("%s: delivering %i bytes overflow\n", __func__,
 			hp->n_throttle);
 
-	hvsi_insert_chars(hp, hp->throttle_buf, hp->n_throttle);
+	hvsi_insert_chars(hp, tty, hp->throttle_buf, hp->n_throttle);
 	hp->n_throttle = 0;
 }
 
@@ -494,35 +490,20 @@ static void hvsi_send_overflow(struct hvsi_struct *hp)
 static irqreturn_t hvsi_interrupt(int irq, void *arg)
 {
 	struct hvsi_struct *hp = (struct hvsi_struct *)arg;
-	struct tty_struct *flip;
-	struct tty_struct *hangup;
 	struct hvsi_struct *handshake;
+	struct tty_struct *tty;
 	unsigned long flags;
 	int again = 1;
 
 	pr_debug("%s\n", __func__);
 
+	tty = tty_port_tty_get(&hp->port);
+
 	while (again) {
 		spin_lock_irqsave(&hp->lock, flags);
-		again = hvsi_load_chunk(hp, &flip, &hangup, &handshake);
+		again = hvsi_load_chunk(hp, tty, &handshake);
 		spin_unlock_irqrestore(&hp->lock, flags);
 
-		/*
-		 * we have to call tty_flip_buffer_push() and tty_hangup() outside our
-		 * spinlock. But we also have to keep going until we've read all the
-		 * available data.
-		 */
-
-		if (flip) {
-			/* there was data put in the tty flip buffer */
-			tty_flip_buffer_push(flip);
-			flip = NULL;
-		}
-
-		if (hangup) {
-			tty_hangup(hangup);
-		}
-
 		if (handshake) {
 			pr_debug("hvsi%i: attempting re-handshake\n", handshake->index);
 			schedule_work(&handshake->handshaker);
@@ -530,18 +511,15 @@ static irqreturn_t hvsi_interrupt(int irq, void *arg)
 	}
 
 	spin_lock_irqsave(&hp->lock, flags);
-	if (hp->tty && hp->n_throttle
-			&& (!test_bit(TTY_THROTTLED, &hp->tty->flags))) {
-		/* we weren't hung up and we weren't throttled, so we can deliver the
-		 * rest now */
-		flip = hp->tty;
-		hvsi_send_overflow(hp);
+	if (tty && hp->n_throttle && !test_bit(TTY_THROTTLED, &tty->flags)) {
+		/* we weren't hung up and we weren't throttled, so we can
+		 * deliver the rest now */
+		hvsi_send_overflow(hp, tty);
+		tty_flip_buffer_push(tty);
 	}
 	spin_unlock_irqrestore(&hp->lock, flags);
 
-	if (flip) {
-		tty_flip_buffer_push(flip);
-	}
+	tty_kref_put(tty);
 
 	return IRQ_HANDLED;
 }
@@ -749,9 +727,9 @@ static int hvsi_open(struct tty_struct *tty, struct file *filp)
 	if (hp->state == HVSI_FSP_DIED)
 		return -EIO;
 
+	tty_port_tty_set(&hp->port, tty);
 	spin_lock_irqsave(&hp->lock, flags);
-	hp->tty = tty;
-	hp->count++;
+	hp->port.count++;
 	atomic_set(&hp->seqno, 0);
 	h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
 	spin_unlock_irqrestore(&hp->lock, flags);
@@ -808,8 +786,8 @@ static void hvsi_close(struct tty_struct *tty, struct file *filp)
 
 	spin_lock_irqsave(&hp->lock, flags);
 
-	if (--hp->count == 0) {
-		hp->tty = NULL;
+	if (--hp->port.count == 0) {
+		tty_port_tty_set(&hp->port, NULL);
 		hp->inbuf_end = hp->inbuf; /* discard remaining partial packets */
 
 		/* only close down connection if it is not the console */
@@ -841,9 +819,9 @@ static void hvsi_close(struct tty_struct *tty, struct file *filp)
 
 			spin_lock_irqsave(&hp->lock, flags);
 		}
-	} else if (hp->count < 0)
+	} else if (hp->port.count < 0)
 		printk(KERN_ERR "hvsi_close %lu: oops, count is %d\n",
-		       hp - hvsi_ports, hp->count);
+		       hp - hvsi_ports, hp->port.count);
 
 	spin_unlock_irqrestore(&hp->lock, flags);
 }
@@ -855,12 +833,11 @@ static void hvsi_hangup(struct tty_struct *tty)
 
 	pr_debug("%s\n", __func__);
 
-	spin_lock_irqsave(&hp->lock, flags);
+	tty_port_tty_set(&hp->port, NULL);
 
-	hp->count = 0;
+	spin_lock_irqsave(&hp->lock, flags);
+	hp->port.count = 0;
 	hp->n_outbuf = 0;
-	hp->tty = NULL;
-
 	spin_unlock_irqrestore(&hp->lock, flags);
 }
 
@@ -888,6 +865,7 @@ static void hvsi_write_worker(struct work_struct *work)
 {
 	struct hvsi_struct *hp =
 		container_of(work, struct hvsi_struct, writer.work);
+	struct tty_struct *tty;
 	unsigned long flags;
 #ifdef DEBUG
 	static long start_j = 0;
@@ -921,7 +899,11 @@ static void hvsi_write_worker(struct work_struct *work)
 		start_j = 0;
 #endif /* DEBUG */
 		wake_up_all(&hp->emptyq);
-		tty_wakeup(hp->tty);
+		tty = tty_port_tty_get(&hp->port);
+		if (tty) {
+			tty_wakeup(tty);
+			tty_kref_put(tty);
+		}
 	}
 
 out:
@@ -966,8 +948,8 @@ static int hvsi_write(struct tty_struct *tty,
 	 * and hvsi_write_worker will be scheduled. subsequent hvsi_write() calls
 	 * will see there is no room in outbuf and return.
 	 */
-	while ((count > 0) && (hvsi_write_room(hp->tty) > 0)) {
-		int chunksize = min(count, hvsi_write_room(hp->tty));
+	while ((count > 0) && (hvsi_write_room(tty) > 0)) {
+		int chunksize = min(count, hvsi_write_room(tty));
 
 		BUG_ON(hp->n_outbuf < 0);
 		memcpy(hp->outbuf + hp->n_outbuf, source, chunksize);
@@ -1014,19 +996,16 @@ static void hvsi_unthrottle(struct tty_struct *tty)
 {
 	struct hvsi_struct *hp = tty->driver_data;
 	unsigned long flags;
-	int shouldflip = 0;
 
 	pr_debug("%s\n", __func__);
 
 	spin_lock_irqsave(&hp->lock, flags);
 	if (hp->n_throttle) {
-		hvsi_send_overflow(hp);
-		shouldflip = 1;
+		hvsi_send_overflow(hp, tty);
+		tty_flip_buffer_push(tty);
 	}
 	spin_unlock_irqrestore(&hp->lock, flags);
 
-	if (shouldflip)
-		tty_flip_buffer_push(hp->tty);
 
 	h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE);
 }
@@ -1228,6 +1207,7 @@ static int __init hvsi_console_init(void)
 		init_waitqueue_head(&hp->emptyq);
 		init_waitqueue_head(&hp->stateq);
 		spin_lock_init(&hp->lock);
+		tty_port_init(&hp->port);
 		hp->index = hvsi_count;
 		hp->inbuf_end = hp->inbuf;
 		hp->state = HVSI_CLOSED;
diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c
index 6f4dd83d8695..59c135dd5d20 100644
--- a/drivers/tty/hvc/hvsi_lib.c
+++ b/drivers/tty/hvc/hvsi_lib.c
@@ -377,7 +377,7 @@ int hvsilib_open(struct hvsi_priv *pv, struct hvc_struct *hp)
 	pr_devel("HVSI@%x: open !\n", pv->termno);
 
 	/* Keep track of the tty data structure */
-	pv->tty = tty_kref_get(hp->tty);
+	pv->tty = tty_port_tty_get(&hp->port);
 
 	hvsilib_establish(pv);
 
diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c
index 4daf962f7055..f8b5fa0093a3 100644
--- a/drivers/tty/ipwireless/tty.c
+++ b/drivers/tty/ipwireless/tty.c
@@ -44,14 +44,13 @@
 #define TTYTYPE_RAS_RAW  (2)
 
 struct ipw_tty {
+	struct tty_port port;
 	int index;
 	struct ipw_hardware *hardware;
 	unsigned int channel_idx;
 	unsigned int secondary_channel_idx;
 	int tty_type;
 	struct ipw_network *network;
-	struct tty_struct *linux_tty;
-	int open_count;
 	unsigned int control_lines;
 	struct mutex ipw_tty_mutex;
 	int tx_bytes_queued;
@@ -73,23 +72,6 @@ static char *tty_type_name(int tty_type)
 	return channel_names[tty_type];
 }
 
-static void report_registering(struct ipw_tty *tty)
-{
-	char *iftype = tty_type_name(tty->tty_type);
-
-	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-	       ": registering %s device ttyIPWp%d\n", iftype, tty->index);
-}
-
-static void report_deregistering(struct ipw_tty *tty)
-{
-	char *iftype = tty_type_name(tty->tty_type);
-
-	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-	       ": deregistering %s device ttyIPWp%d\n", iftype,
-	       tty->index);
-}
-
 static struct ipw_tty *get_tty(int index)
 {
 	/*
@@ -117,12 +99,12 @@ static int ipw_open(struct tty_struct *linux_tty, struct file *filp)
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return -ENODEV;
 	}
-	if (tty->open_count == 0)
+	if (tty->port.count == 0)
 		tty->tx_bytes_queued = 0;
 
-	tty->open_count++;
+	tty->port.count++;
 
-	tty->linux_tty = linux_tty;
+	tty->port.tty = linux_tty;
 	linux_tty->driver_data = tty;
 	linux_tty->low_latency = 1;
 
@@ -136,13 +118,13 @@ static int ipw_open(struct tty_struct *linux_tty, struct file *filp)
 
 static void do_ipw_close(struct ipw_tty *tty)
 {
-	tty->open_count--;
+	tty->port.count--;
 
-	if (tty->open_count == 0) {
-		struct tty_struct *linux_tty = tty->linux_tty;
+	if (tty->port.count == 0) {
+		struct tty_struct *linux_tty = tty->port.tty;
 
 		if (linux_tty != NULL) {
-			tty->linux_tty = NULL;
+			tty->port.tty = NULL;
 			linux_tty->driver_data = NULL;
 
 			if (tty->tty_type == TTYTYPE_MODEM)
@@ -159,7 +141,7 @@ static void ipw_hangup(struct tty_struct *linux_tty)
 		return;
 
 	mutex_lock(&tty->ipw_tty_mutex);
-	if (tty->open_count == 0) {
+	if (tty->port.count == 0) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return;
 	}
@@ -182,13 +164,13 @@ void ipwireless_tty_received(struct ipw_tty *tty, unsigned char *data,
 	int work = 0;
 
 	mutex_lock(&tty->ipw_tty_mutex);
-	linux_tty = tty->linux_tty;
+	linux_tty = tty->port.tty;
 	if (linux_tty == NULL) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return;
 	}
 
-	if (!tty->open_count) {
+	if (!tty->port.count) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return;
 	}
@@ -230,7 +212,7 @@ static int ipw_write(struct tty_struct *linux_tty,
 		return -ENODEV;
 
 	mutex_lock(&tty->ipw_tty_mutex);
-	if (!tty->open_count) {
+	if (!tty->port.count) {
 		mutex_unlock(&tty->ipw_tty_mutex);
 		return -EINVAL;
 	}
@@ -270,7 +252,7 @@ static int ipw_write_room(struct tty_struct *linux_tty)
 	if (!tty)
 		return -ENODEV;
 
-	if (!tty->open_count)
+	if (!tty->port.count)
 		return -EINVAL;
 
 	room = IPWIRELESS_TX_QUEUE_SIZE - tty->tx_bytes_queued;
@@ -312,7 +294,7 @@ static int ipw_chars_in_buffer(struct tty_struct *linux_tty)
 	if (!tty)
 		return 0;
 
-	if (!tty->open_count)
+	if (!tty->port.count)
 		return 0;
 
 	return tty->tx_bytes_queued;
@@ -393,7 +375,7 @@ static int ipw_tiocmget(struct tty_struct *linux_tty)
 	if (!tty)
 		return -ENODEV;
 
-	if (!tty->open_count)
+	if (!tty->port.count)
 		return -EINVAL;
 
 	return get_control_lines(tty);
@@ -409,7 +391,7 @@ ipw_tiocmset(struct tty_struct *linux_tty,
 	if (!tty)
 		return -ENODEV;
 
-	if (!tty->open_count)
+	if (!tty->port.count)
 		return -EINVAL;
 
 	return set_control_lines(tty, set, clear);
@@ -423,7 +405,7 @@ static int ipw_ioctl(struct tty_struct *linux_tty,
 	if (!tty)
 		return -ENODEV;
 
-	if (!tty->open_count)
+	if (!tty->port.count)
 		return -EINVAL;
 
 	/* FIXME: Exactly how is the tty object locked here .. */
@@ -492,6 +474,7 @@ static int add_tty(int j,
 	ttys[j]->network = network;
 	ttys[j]->tty_type = tty_type;
 	mutex_init(&ttys[j]->ipw_tty_mutex);
+	tty_port_init(&ttys[j]->port);
 
 	tty_register_device(ipw_tty_driver, j, NULL);
 	ipwireless_associate_network_tty(network, channel_idx, ttys[j]);
@@ -500,8 +483,12 @@ static int add_tty(int j,
 		ipwireless_associate_network_tty(network,
 						 secondary_channel_idx,
 						 ttys[j]);
-	if (get_tty(j) == ttys[j])
-		report_registering(ttys[j]);
+	/* check if we provide raw device (if loopback is enabled) */
+	if (get_tty(j))
+		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+		       ": registering %s device ttyIPWp%d\n",
+		       tty_type_name(tty_type), j);
+
 	return 0;
 }
 
@@ -560,19 +547,21 @@ void ipwireless_tty_free(struct ipw_tty *tty)
 
 		if (ttyj) {
 			mutex_lock(&ttyj->ipw_tty_mutex);
-			if (get_tty(j) == ttyj)
-				report_deregistering(ttyj);
+			if (get_tty(j))
+				printk(KERN_INFO IPWIRELESS_PCCARD_NAME
+				       ": deregistering %s device ttyIPWp%d\n",
+				       tty_type_name(ttyj->tty_type), j);
 			ttyj->closing = 1;
-			if (ttyj->linux_tty != NULL) {
+			if (ttyj->port.tty != NULL) {
 				mutex_unlock(&ttyj->ipw_tty_mutex);
-				tty_hangup(ttyj->linux_tty);
-				/* Wait till the tty_hangup has completed */
-				flush_work_sync(&ttyj->linux_tty->hangup_work);
+				tty_vhangup(ttyj->port.tty);
 				/* FIXME: Exactly how is the tty object locked here
 				   against a parallel ioctl etc */
+				/* FIXME2: hangup does not mean all processes
+				 * are gone */
 				mutex_lock(&ttyj->ipw_tty_mutex);
 			}
-			while (ttyj->open_count)
+			while (ttyj->port.count)
 				do_ipw_close(ttyj);
 			ipwireless_disassociate_network_ttys(network,
 							     ttyj->channel_idx);
@@ -661,8 +650,8 @@ ipwireless_tty_notify_control_line_change(struct ipw_tty *tty,
 	 */
 	if ((old_control_lines & IPW_CONTROL_LINE_DCD)
 			&& !(tty->control_lines & IPW_CONTROL_LINE_DCD)
-			&& tty->linux_tty) {
-		tty_hangup(tty->linux_tty);
+			&& tty->port.tty) {
+		tty_hangup(tty->port.tty);
 	}
 }
 
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index c6f372dd5623..90cc680c4f0e 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -2326,7 +2326,7 @@ static const struct tty_operations mxser_ops = {
 	.get_icount = mxser_get_icount,
 };
 
-struct tty_port_operations mxser_port_ops = {
+static struct tty_port_operations mxser_port_ops = {
 	.carrier_raised = mxser_carrier_raised,
 	.dtr_rts = mxser_dtr_rts,
 	.activate = mxser_activate,
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index 5c6c31459a2f..656ad93bbc96 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -1065,7 +1065,8 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
 
 	TRACE_L("read()");
 
-	tty_lock();
+	/* FIXME: should use a private lock */
+	tty_lock(tty);
 
 	pClient = findClient(pInfo, task_pid(current));
 	if (pClient) {
@@ -1077,7 +1078,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
 				goto unlock;
 			}
 			/* block until there is a message: */
-			wait_event_interruptible_tty(pInfo->read_wait,
+			wait_event_interruptible_tty(tty, pInfo->read_wait,
 					(pMsg = remove_msg(pInfo, pClient)));
 		}
 
@@ -1107,7 +1108,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file,
 	}
 	ret = -EPERM;
 unlock:
-	tty_unlock();
+	tty_unlock(tty);
 	return ret;
 }
 
@@ -1156,7 +1157,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
 	pHeader->locks = 0;
 	pHeader->owner = NULL;
 
-	tty_lock();
+	tty_lock(tty);
 
 	pClient = findClient(pInfo, task_pid(current));
 	if (pClient) {
@@ -1175,7 +1176,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
 	add_tx_queue(pInfo, pHeader);
 	trigger_transmit(pInfo);
 
-	tty_unlock();
+	tty_unlock(tty);
 
 	return 0;
 }
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 94b6eda87afd..ee1c268f5f9d 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1630,6 +1630,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
 	int retval;
 	size_t n;
 	unsigned long flags;
+	bool is_eof;
 
 	retval = 0;
 	spin_lock_irqsave(&tty->read_lock, flags);
@@ -1639,15 +1640,15 @@ static int copy_from_read_buf(struct tty_struct *tty,
 	if (n) {
 		retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n);
 		n -= retval;
+		is_eof = n == 1 &&
+			tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
 		tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n);
 		spin_lock_irqsave(&tty->read_lock, flags);
 		tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
 		tty->read_cnt -= n;
 		/* Turn single EOF into zero-length read */
-		if (L_EXTPROC(tty) && tty->icanon && n == 1) {
-			if (!tty->read_cnt && (*b)[n-1] == EOF_CHAR(tty))
-				n--;
-		}
+		if (L_EXTPROC(tty) && tty->icanon && is_eof && !tty->read_cnt)
+			n = 0;
 		spin_unlock_irqrestore(&tty->read_lock, flags);
 		*b += n;
 		*nr -= n;
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index eeae7fafe9a7..59af3945ea85 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -26,11 +26,13 @@
 #include <linux/bitops.h>
 #include <linux/devpts_fs.h>
 #include <linux/slab.h>
+#include <linux/mutex.h>
 
 
 #ifdef CONFIG_UNIX98_PTYS
 static struct tty_driver *ptm_driver;
 static struct tty_driver *pts_driver;
+static DEFINE_MUTEX(devpts_mutex);
 #endif
 
 static void pty_close(struct tty_struct *tty, struct file *filp)
@@ -45,6 +47,7 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
 	wake_up_interruptible(&tty->read_wait);
 	wake_up_interruptible(&tty->write_wait);
 	tty->packet = 0;
+	/* Review - krefs on tty_link ?? */
 	if (!tty->link)
 		return;
 	tty->link->packet = 0;
@@ -54,12 +57,15 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
 	if (tty->driver->subtype == PTY_TYPE_MASTER) {
 		set_bit(TTY_OTHER_CLOSED, &tty->flags);
 #ifdef CONFIG_UNIX98_PTYS
-		if (tty->driver == ptm_driver)
+		if (tty->driver == ptm_driver) {
+		        mutex_lock(&devpts_mutex);
 			devpts_pty_kill(tty->link);
+		        mutex_unlock(&devpts_mutex);
+		}
 #endif
-		tty_unlock();
+		tty_unlock(tty);
 		tty_vhangup(tty->link);
-		tty_lock();
+		tty_lock(tty);
 	}
 }
 
@@ -475,13 +481,17 @@ static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver,
  *	@idx: tty index
  *
  *	Look up a pty master device. Called under the tty_mutex for now.
- *	This provides our locking.
+ *	This provides our locking for the tty pointer.
  */
 
 static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
 		struct inode *pts_inode, int idx)
 {
-	struct tty_struct *tty = devpts_get_tty(pts_inode, idx);
+	struct tty_struct *tty;
+
+	mutex_lock(&devpts_mutex);
+	tty = devpts_get_tty(pts_inode, idx);
+	mutex_unlock(&devpts_mutex);
 	/* Master must be open before slave */
 	if (!tty)
 		return ERR_PTR(-EIO);
@@ -613,24 +623,29 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 		return retval;
 
 	/* find a device that is not in use. */
-	tty_lock();
+	mutex_lock(&devpts_mutex);
 	index = devpts_new_index(inode);
-	tty_unlock();
 	if (index < 0) {
 		retval = index;
 		goto err_file;
 	}
 
+	mutex_unlock(&devpts_mutex);
+
 	mutex_lock(&tty_mutex);
-	tty_lock();
+	mutex_lock(&devpts_mutex);
 	tty = tty_init_dev(ptm_driver, index);
-	mutex_unlock(&tty_mutex);
 
 	if (IS_ERR(tty)) {
 		retval = PTR_ERR(tty);
 		goto out;
 	}
 
+	/* The tty returned here is locked so we can safely
+	   drop the mutex */
+	mutex_unlock(&devpts_mutex);
+	mutex_unlock(&tty_mutex);
+
 	set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
 
 	tty_add_file(tty, filp);
@@ -643,16 +658,17 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 	if (retval)
 		goto err_release;
 
-	tty_unlock();
+	tty_unlock(tty);
 	return 0;
 err_release:
-	tty_unlock();
+	tty_unlock(tty);
 	tty_release(inode, filp);
 	return retval;
 out:
+	mutex_unlock(&tty_mutex);
 	devpts_kill_index(inode, index);
-	tty_unlock();
 err_file:
+        mutex_unlock(&devpts_mutex);
 	tty_free_file(filp);
 	return retval;
 }
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 5ce782529d65..3ed20e435e59 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -17,6 +17,7 @@
 #include <asm/dbg.h>
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/serial.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
@@ -56,8 +57,6 @@
 #endif /* CONFIG_M68VZ328 */
 #endif /* CONFIG_M68EZ328 */
 
-#include "68328serial.h"
-
 /* Turn off usage of real serial interrupt code, to "support" Copilot */
 #ifdef CONFIG_XCOPILOT_BUGS
 #undef USE_INTS
@@ -65,33 +64,82 @@
 #define USE_INTS
 #endif
 
-static struct m68k_serial m68k_soft[NR_PORTS];
+/*
+ * I believe this is the optimal setting that reduces the number of interrupts.
+ * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
+ * if that bothers you), but in most cases it will not, since we try to
+ * transmit characters every time rs_interrupt is called. Thus, quite often
+ * you'll see that a receive interrupt occures before the transmit one.
+ *                                  -- Vladimir Gurevich
+ */
+#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
 
-static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS;
+/*
+ * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
+ * "Old data interrupt" which occures whenever the data stay in the FIFO
+ * longer than 30 bits time. This allows us to use FIFO without compromising
+ * latency. '328 does not have this feature and without the real  328-based
+ * board I would assume that RXRE is the safest setting.
+ *
+ * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
+ * interrupts. RXFE (receive queue full) causes the system to lose data
+ * at least at 115200 baud
+ *
+ * If your board is busy doing other stuff, you might consider to use
+ * RXRE (data ready intrrupt) instead.
+ *
+ * The other option is to make these INTR masks run-time configurable, so
+ * that people can dynamically adapt them according to the current usage.
+ *                                  -- Vladimir Gurevich
+ */
 
-/* multiple ports are contiguous in memory */
-m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;
+/* (es) */
+#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
+#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
+#elif defined(CONFIG_M68328)
+#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
+#else
+#error Please, define the Rx interrupt events for your CPU
+#endif
+/* (/es) */
 
-struct tty_struct m68k_ttys;
-struct m68k_serial *m68k_consinfo = 0;
+/*
+ * This is our internal structure for each serial port's state.
+ */
+struct m68k_serial {
+	struct tty_port		tport;
+	char			is_cons;	/* Is this our console. */
+	int			magic;
+	int			baud_base;
+	int			port;
+	int			irq;
+	int			type;		/* UART type */
+	int			custom_divisor;
+	int			x_char;		/* xon/xoff character */
+	int			line;
+	unsigned char		*xmit_buf;
+	int			xmit_head;
+	int			xmit_tail;
+	int			xmit_cnt;
+};
 
-#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
+#define SERIAL_MAGIC 0x5301
 
-struct tty_driver *serial_driver;
+/*
+ * Define the number of ports supported and their irqs.
+ */
+#define NR_PORTS 1
 
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
+static struct m68k_serial m68k_soft[NR_PORTS];
 
-/* Debugging... DEBUG_INTR is bad to use when one of the zs
- * lines is your console ;(
- */
-#undef SERIAL_DEBUG_INTR
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
+static unsigned int uart_irqs[NR_PORTS] = { UART_IRQ_NUM };
 
-#define RS_ISR_PASS_LIMIT 256
+/* multiple ports are contiguous in memory */
+m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;
+
+struct tty_driver *serial_driver;
 
-static void change_speed(struct m68k_serial *info);
+static void change_speed(struct m68k_serial *info, struct tty_struct *tty);
 
 /*
  *	Setup for console. Argument comes from the boot command line.
@@ -143,17 +191,6 @@ static int baud_table[] = {
 	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
 	9600, 19200, 38400, 57600, 115200, 0 };
 
-/* Sets or clears DTR/RTS on the requested line */
-static inline void m68k_rtsdtr(struct m68k_serial *ss, int set)
-{
-	if (set) {
-		/* set the RTS/CTS line */
-	} else {
-		/* clear it */
-	}
-	return;
-}
-
 /* Utility routines */
 static inline int get_baud(struct m68k_serial *ss)
 {
@@ -189,7 +226,8 @@ static void rs_stop(struct tty_struct *tty)
 
 static int rs_put_char(char ch)
 {
-        int flags, loops = 0;
+	unsigned long flags;
+	int loops = 0;
 
         local_irq_save(flags);
 
@@ -224,28 +262,9 @@ static void rs_start(struct tty_struct *tty)
 	local_irq_restore(flags);
 }
 
-/* Drop into either the boot monitor or kadb upon receiving a break
- * from keyboard/console input.
- */
-static void batten_down_hatches(void)
-{
-	/* Drop into the debugger */
-}
-
-static void status_handle(struct m68k_serial *info, unsigned short status)
+static void receive_chars(struct m68k_serial *info, struct tty_struct *tty,
+		unsigned short rx)
 {
-	/* If this is console input and this is a
-	 * 'break asserted' status change interrupt
-	 * see if we can drop into the debugger
-	 */
-	if((status & URX_BREAK) && info->break_abort)
-		batten_down_hatches();
-	return;
-}
-
-static void receive_chars(struct m68k_serial *info, unsigned short rx)
-{
-	struct tty_struct *tty = info->tty;
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned char ch, flag;
 
@@ -259,7 +278,6 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)
 	
 		if(info->is_cons) {
 			if(URX_BREAK & rx) { /* whee, break received */
-				status_handle(info, rx);
 				return;
 #ifdef CONFIG_MAGIC_SYSRQ
 			} else if (ch == 0x10) { /* ^P */
@@ -280,16 +298,13 @@ static void receive_chars(struct m68k_serial *info, unsigned short rx)
 		
 		flag = TTY_NORMAL;
 
-		if(rx & URX_PARITY_ERROR) {
+		if (rx & URX_PARITY_ERROR)
 			flag = TTY_PARITY;
-			status_handle(info, rx);
-		} else if(rx & URX_OVRUN) {
+		else if (rx & URX_OVRUN)
 			flag = TTY_OVERRUN;
-			status_handle(info, rx);
-		} else if(rx & URX_FRAME_ERROR) {
+		else if (rx & URX_FRAME_ERROR)
 			flag = TTY_FRAME;
-			status_handle(info, rx);
-		}
+
 		tty_insert_flip_char(tty, ch, flag);
 #ifndef CONFIG_XCOPILOT_BUGS
 	} while((rx = uart->urx.w) & URX_DATA_READY);
@@ -301,7 +316,7 @@ clear_and_exit:
 	return;
 }
 
-static void transmit_chars(struct m68k_serial *info)
+static void transmit_chars(struct m68k_serial *info, struct tty_struct *tty)
 {
 	m68328_uart *uart = &uart_addr[info->line];
 
@@ -312,7 +327,7 @@ static void transmit_chars(struct m68k_serial *info)
 		goto clear_and_return;
 	}
 
-	if((info->xmit_cnt <= 0) || info->tty->stopped) {
+	if ((info->xmit_cnt <= 0) || !tty || tty->stopped) {
 		/* That's peculiar... TX ints off */
 		uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
 		goto clear_and_return;
@@ -340,6 +355,7 @@ clear_and_return:
 irqreturn_t rs_interrupt(int irq, void *dev_id)
 {
 	struct m68k_serial *info = dev_id;
+	struct tty_struct *tty = tty_port_tty_get(&info->tport);
 	m68328_uart *uart;
 	unsigned short rx;
 	unsigned short tx;
@@ -350,20 +366,24 @@ irqreturn_t rs_interrupt(int irq, void *dev_id)
 #ifdef USE_INTS
 	tx = uart->utx.w;
 
-	if (rx & URX_DATA_READY) receive_chars(info, rx);
-	if (tx & UTX_TX_AVAIL)   transmit_chars(info);
+	if (rx & URX_DATA_READY)
+		receive_chars(info, tty, rx);
+	if (tx & UTX_TX_AVAIL)
+		transmit_chars(info, tty);
 #else
-	receive_chars(info, rx);		
+	receive_chars(info, tty, rx);
 #endif
+	tty_kref_put(tty);
+
 	return IRQ_HANDLED;
 }
 
-static int startup(struct m68k_serial * info)
+static int startup(struct m68k_serial *info, struct tty_struct *tty)
 {
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned long flags;
 	
-	if (info->flags & S_INITIALIZED)
+	if (info->tport.flags & ASYNC_INITIALIZED)
 		return 0;
 
 	if (!info->xmit_buf) {
@@ -380,7 +400,6 @@ static int startup(struct m68k_serial * info)
 	 */
 
 	uart->ustcnt = USTCNT_UEN;
-	info->xmit_fifo_size = 1;
 	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
 	(void)uart->urx.w;
 
@@ -394,17 +413,17 @@ static int startup(struct m68k_serial * info)
 	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
 #endif
 
-	if (info->tty)
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (tty)
+		clear_bit(TTY_IO_ERROR, &tty->flags);
 	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 
 	/*
 	 * and set the speed of the serial port
 	 */
 
-	change_speed(info);
+	change_speed(info, tty);
 
-	info->flags |= S_INITIALIZED;
+	info->tport.flags |= ASYNC_INITIALIZED;
 	local_irq_restore(flags);
 	return 0;
 }
@@ -413,13 +432,13 @@ static int startup(struct m68k_serial * info)
  * This routine will shutdown a serial port; interrupts are disabled, and
  * DTR is dropped if the hangup on close termio flag is on.
  */
-static void shutdown(struct m68k_serial * info)
+static void shutdown(struct m68k_serial *info, struct tty_struct *tty)
 {
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned long	flags;
 
 	uart->ustcnt = 0; /* All off! */
-	if (!(info->flags & S_INITIALIZED))
+	if (!(info->tport.flags & ASYNC_INITIALIZED))
 		return;
 
 	local_irq_save(flags);
@@ -429,10 +448,10 @@ static void shutdown(struct m68k_serial * info)
 		info->xmit_buf = 0;
 	}
 
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (tty)
+		set_bit(TTY_IO_ERROR, &tty->flags);
 	
-	info->flags &= ~S_INITIALIZED;
+	info->tport.flags &= ~ASYNC_INITIALIZED;
 	local_irq_restore(flags);
 }
 
@@ -488,7 +507,7 @@ struct {
  * This routine is called to set the UART divisor registers to match
  * the specified baud rate for a serial port.
  */
-static void change_speed(struct m68k_serial *info)
+static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
 {
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned short port;
@@ -496,9 +515,7 @@ static void change_speed(struct m68k_serial *info)
 	unsigned cflag;
 	int	i;
 
-	if (!info->tty || !info->tty->termios)
-		return;
-	cflag = info->tty->termios->c_cflag;
+	cflag = tty->termios->c_cflag;
 	if (!(port = info->port))
 		return;
 
@@ -510,7 +527,6 @@ static void change_speed(struct m68k_serial *info)
                 i = (i & ~CBAUDEX) + B38400;
         }
 
-	info->baud = baud_table[i];
 	uart->ubaud = PUT_FIELD(UBAUD_DIVIDE,    hw_baud_table[i].divisor) | 
 		PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
 
@@ -807,10 +823,10 @@ static int get_serial_info(struct m68k_serial * info,
 	tmp.line = info->line;
 	tmp.port = info->port;
 	tmp.irq = info->irq;
-	tmp.flags = info->flags;
+	tmp.flags = info->tport.flags;
 	tmp.baud_base = info->baud_base;
-	tmp.close_delay = info->close_delay;
-	tmp.closing_wait = info->closing_wait;
+	tmp.close_delay = info->tport.close_delay;
+	tmp.closing_wait = info->tport.closing_wait;
 	tmp.custom_divisor = info->custom_divisor;
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -818,9 +834,10 @@ static int get_serial_info(struct m68k_serial * info,
 	return 0;
 }
 
-static int set_serial_info(struct m68k_serial * info,
+static int set_serial_info(struct m68k_serial *info, struct tty_struct *tty,
 			   struct serial_struct * new_info)
 {
+	struct tty_port *port = &info->tport;
 	struct serial_struct new_serial;
 	struct m68k_serial old_info;
 	int 			retval = 0;
@@ -834,17 +851,17 @@ static int set_serial_info(struct m68k_serial * info,
 	if (!capable(CAP_SYS_ADMIN)) {
 		if ((new_serial.baud_base != info->baud_base) ||
 		    (new_serial.type != info->type) ||
-		    (new_serial.close_delay != info->close_delay) ||
-		    ((new_serial.flags & ~S_USR_MASK) !=
-		     (info->flags & ~S_USR_MASK)))
+		    (new_serial.close_delay != port->close_delay) ||
+		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
+		     (port->flags & ~ASYNC_USR_MASK)))
 			return -EPERM;
-		info->flags = ((info->flags & ~S_USR_MASK) |
-			       (new_serial.flags & S_USR_MASK));
+		port->flags = ((port->flags & ~ASYNC_USR_MASK) |
+			       (new_serial.flags & ASYNC_USR_MASK));
 		info->custom_divisor = new_serial.custom_divisor;
 		goto check_and_exit;
 	}
 
-	if (info->count > 1)
+	if (port->count > 1)
 		return -EBUSY;
 
 	/*
@@ -853,14 +870,14 @@ static int set_serial_info(struct m68k_serial * info,
 	 */
 
 	info->baud_base = new_serial.baud_base;
-	info->flags = ((info->flags & ~S_FLAGS) |
-			(new_serial.flags & S_FLAGS));
+	port->flags = ((port->flags & ~ASYNC_FLAGS) |
+			(new_serial.flags & ASYNC_FLAGS));
 	info->type = new_serial.type;
-	info->close_delay = new_serial.close_delay;
-	info->closing_wait = new_serial.closing_wait;
+	port->close_delay = new_serial.close_delay;
+	port->closing_wait = new_serial.closing_wait;
 
 check_and_exit:
-	retval = startup(info);
+	retval = startup(info, tty);
 	return retval;
 }
 
@@ -946,7 +963,7 @@ static int rs_ioctl(struct tty_struct *tty,
 			return get_serial_info(info,
 				       (struct serial_struct *) arg);
 		case TIOCSSERIAL:
-			return set_serial_info(info,
+			return set_serial_info(info, tty,
 					       (struct serial_struct *) arg);
 		case TIOCSERGETLSR: /* Get line status register */
 			return get_lsr_info(info, (unsigned int *) arg);
@@ -965,7 +982,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
 	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
 
-	change_speed(info);
+	change_speed(info, tty);
 
 	if ((old_termios->c_cflag & CRTSCTS) &&
 	    !(tty->termios->c_cflag & CRTSCTS)) {
@@ -988,6 +1005,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 static void rs_close(struct tty_struct *tty, struct file * filp)
 {
 	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
+	struct tty_port *port = &info->tport;
 	m68328_uart *uart = &uart_addr[info->line];
 	unsigned long flags;
 
@@ -1001,7 +1019,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 		return;
 	}
 	
-	if ((tty->count == 1) && (info->count != 1)) {
+	if ((tty->count == 1) && (port->count != 1)) {
 		/*
 		 * Uh, oh.  tty->count is 1, which means that the tty
 		 * structure will be freed.  Info->count should always
@@ -1010,26 +1028,26 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 		 * serial port won't be shutdown.
 		 */
 		printk("rs_close: bad serial port count; tty->count is 1, "
-		       "info->count is %d\n", info->count);
-		info->count = 1;
+		       "port->count is %d\n", port->count);
+		port->count = 1;
 	}
-	if (--info->count < 0) {
+	if (--port->count < 0) {
 		printk("rs_close: bad serial port count for ttyS%d: %d\n",
-		       info->line, info->count);
-		info->count = 0;
+		       info->line, port->count);
+		port->count = 0;
 	}
-	if (info->count) {
+	if (port->count) {
 		local_irq_restore(flags);
 		return;
 	}
-	info->flags |= S_CLOSING;
+	port->flags |= ASYNC_CLOSING;
 	/*
 	 * Now we wait for the transmit buffer to clear; and we notify 
 	 * the line discipline to only process XON/XOFF characters.
 	 */
 	tty->closing = 1;
-	if (info->closing_wait != S_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
+	if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, port->closing_wait);
 	/*
 	 * At this point we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts, and tell the
@@ -1040,13 +1058,12 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	uart->ustcnt &= ~USTCNT_RXEN;
 	uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK);
 
-	shutdown(info);
+	shutdown(info, tty);
 	rs_flush_buffer(tty);
 		
 	tty_ldisc_flush(tty);
 	tty->closing = 0;
-	info->event = 0;
-	info->tty = NULL;
+	tty_port_tty_set(&info->tport, NULL);
 #warning "This is not and has never been valid so fix it"	
 #if 0
 	if (tty->ldisc.num != ldiscs[N_TTY].num) {
@@ -1058,14 +1075,13 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 			(tty->ldisc.open)(tty);
 	}
 #endif	
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			msleep_interruptible(jiffies_to_msecs(info->close_delay));
-		}
-		wake_up_interruptible(&info->open_wait);
+	if (port->blocked_open) {
+		if (port->close_delay)
+			msleep_interruptible(jiffies_to_msecs(port->close_delay));
+		wake_up_interruptible(&port->open_wait);
 	}
-	info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING);
-	wake_up_interruptible(&info->close_wait);
+	port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	wake_up_interruptible(&port->close_wait);
 	local_irq_restore(flags);
 }
 
@@ -1080,107 +1096,14 @@ void rs_hangup(struct tty_struct *tty)
 		return;
 	
 	rs_flush_buffer(tty);
-	shutdown(info);
-	info->event = 0;
-	info->count = 0;
-	info->flags &= ~S_NORMAL_ACTIVE;
-	info->tty = NULL;
-	wake_up_interruptible(&info->open_wait);
+	shutdown(info, tty);
+	info->tport.count = 0;
+	info->tport.flags &= ~ASYNC_NORMAL_ACTIVE;
+	tty_port_tty_set(&info->tport, NULL);
+	wake_up_interruptible(&info->tport.open_wait);
 }
 
 /*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-			   struct m68k_serial *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int		retval;
-	int		do_clocal = 0;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (info->flags & S_CLOSING) {
-		interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		if (info->flags & S_HUP_NOTIFY)
-			return -EAGAIN;
-		else
-			return -ERESTARTSYS;
-#else
-		return -EAGAIN;
-#endif
-	}
-	
-	/*
-	 * If non-blocking mode is set, or the port is not enabled,
-	 * then make the check up front and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		info->flags |= S_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	if (tty->termios->c_cflag & CLOCAL)
-		do_clocal = 1;
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
-	 * rs_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
-
-	info->count--;
-	info->blocked_open++;
-	while (1) {
-		local_irq_disable();
-		m68k_rtsdtr(info, 1);
-		local_irq_enable();
-		current->state = TASK_INTERRUPTIBLE;
-		if (tty_hung_up_p(filp) ||
-		    !(info->flags & S_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
-			if (info->flags & S_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;	
-#else
-			retval = -EAGAIN;
-#endif
-			break;
-		}
-		if (!(info->flags & S_CLOSING) && do_clocal)
-			break;
-                if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-		tty_unlock();
-		schedule();
-		tty_lock();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&info->open_wait, &wait);
-	if (!tty_hung_up_p(filp))
-		info->count++;
-	info->blocked_open--;
-
-	if (retval)
-		return retval;
-	info->flags |= S_NORMAL_ACTIVE;
-	return 0;
-}	
-
-/*
  * This routine is called whenever a serial port is opened.  It
  * enables interrupts for a serial port, linking in its S structure into
  * the IRQ chain.   It also performs the serial-specific
@@ -1196,18 +1119,18 @@ int rs_open(struct tty_struct *tty, struct file * filp)
 	if (serial_paranoia_check(info, tty->name, "rs_open"))
 		return -ENODEV;
 
-	info->count++;
+	info->tport.count++;
 	tty->driver_data = info;
-	info->tty = tty;
+	tty_port_tty_set(&info->tport, tty);
 
 	/*
 	 * Start up serial port
 	 */
-	retval = startup(info);
+	retval = startup(info, tty);
 	if (retval)
 		return retval;
 
-	return block_til_ready(tty, filp, info);
+	return tty_port_block_til_ready(&info->tport, tty, filp);
 }
 
 /* Finally, routines used to initialize the serial driver. */
@@ -1235,11 +1158,15 @@ static const struct tty_operations rs_ops = {
 	.set_ldisc = rs_set_ldisc,
 };
 
+static const struct tty_port_operations rs_port_ops = {
+};
+
 /* rs_init inits the driver */
 static int __init
 rs68328_init(void)
 {
-	int flags, i;
+	unsigned long flags;
+	int i;
 	struct m68k_serial *info;
 
 	serial_driver = alloc_tty_driver(NR_PORTS);
@@ -1273,19 +1200,13 @@ rs68328_init(void)
 	for(i=0;i<NR_PORTS;i++) {
 
 	    info = &m68k_soft[i];
+	    tty_port_init(&info->tport);
+	    info->tport.ops = &rs_port_ops;
 	    info->magic = SERIAL_MAGIC;
 	    info->port = (int) &uart_addr[i];
-	    info->tty = NULL;
 	    info->irq = uart_irqs[i];
 	    info->custom_divisor = 16;
-	    info->close_delay = 50;
-	    info->closing_wait = 3000;
 	    info->x_char = 0;
-	    info->event = 0;
-	    info->count = 0;
-	    info->blocked_open = 0;
-	    init_waitqueue_head(&info->open_wait);
-	    init_waitqueue_head(&info->close_wait);
 	    info->line = i;
 	    info->is_cons = 1; /* Means shortcuts work */
 	    
diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h
deleted file mode 100644
index 3d2faabd766f..000000000000
--- a/drivers/tty/serial/68328serial.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* 68328serial.h: Definitions for the mc68328 serial driver.
- *
- * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
- * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
- * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
- *
- * VZ Support/Fixes             Evan Stawnyczy <e@lineo.ca>
- */
-
-#ifndef _MC683XX_SERIAL_H
-#define _MC683XX_SERIAL_H
-
-
-struct serial_struct {
-	int	type;
-	int	line;
-	int	port;
-	int	irq;
-	int	flags;
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	baud_base;
-	unsigned short	close_delay;
-	char	reserved_char[2];
-	int	hub6;  /* FIXME: We don't have AT&T Hub6 boards! */
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned short	closing_wait2; /* no longer used... */
-	int	reserved[4];
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output.  65535 means don't wait at all.
- */
-#define S_CLOSING_WAIT_INF	0
-#define S_CLOSING_WAIT_NONE	65535
-
-/*
- * Definitions for S_struct (and serial_struct) flags field
- */
-#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes 
-				   on the callout port */
-#define S_FOURPORT  0x0002	/* Set OU1, OUT2 per AST Fourport settings */
-#define S_SAK	0x0004	/* Secure Attention Key (Orange book) */
-#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
-
-#define S_SPD_MASK	0x0030
-#define S_SPD_HI	0x0010	/* Use 56000 instead of 38400 bps */
-
-#define S_SPD_VHI	0x0020  /* Use 115200 instead of 38400 bps */
-#define S_SPD_CUST	0x0030  /* Use user-specified divisor */
-
-#define S_SKIP_TEST	0x0040 /* Skip UART test during autoconfiguration */
-#define S_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
-#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define S_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
-#define S_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
-
-#define S_FLAGS	0x0FFF	/* Possible legal S flags */
-#define S_USR_MASK 0x0430	/* Legal flags that non-privileged
-				 * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define S_INITIALIZED	0x80000000 /* Serial port was initialized */
-#define S_CALLOUT_ACTIVE	0x40000000 /* Call out device is active */
-#define S_NORMAL_ACTIVE	0x20000000 /* Normal device is active */
-#define S_BOOT_AUTOCONF	0x10000000 /* Autoconfigure port on bootup */
-#define S_CLOSING		0x08000000 /* Serial port is closing */
-#define S_CTS_FLOW		0x04000000 /* Do CTS flow control */
-#define S_CHECK_CD		0x02000000 /* i.e., CLOCAL */
-
-/* Software state per channel */
-
-#ifdef __KERNEL__
-
-/*
- * I believe this is the optimal setting that reduces the number of interrupts.
- * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
- * if that bothers you), but in most cases it will not, since we try to 
- * transmit characters every time rs_interrupt is called. Thus, quite often
- * you'll see that a receive interrupt occures before the transmit one.
- *                                  -- Vladimir Gurevich
- */
-#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
-
-/*
- * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
- * "Old data interrupt" which occures whenever the data stay in the FIFO
- * longer than 30 bits time. This allows us to use FIFO without compromising
- * latency. '328 does not have this feature and without the real  328-based
- * board I would assume that RXRE is the safest setting.
- *
- * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
- * interrupts. RXFE (receive queue full) causes the system to lose data
- * at least at 115200 baud
- *
- * If your board is busy doing other stuff, you might consider to use
- * RXRE (data ready intrrupt) instead.
- *
- * The other option is to make these INTR masks run-time configurable, so
- * that people can dynamically adapt them according to the current usage.
- *                                  -- Vladimir Gurevich
- */
-
-/* (es) */
-#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
-#elif defined(CONFIG_M68328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
-#else
-#error Please, define the Rx interrupt events for your CPU
-#endif
-/* (/es) */
-
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct m68k_serial {
-	char soft_carrier;  /* Use soft carrier on this channel */
-	char break_abort;   /* Is serial console in, so process brk/abrt */
-	char is_cons;       /* Is this our console. */
-
-	/* We need to know the current clock divisor
-	 * to read the bps rate the chip has currently
-	 * loaded.
-	 */
-	unsigned char clk_divisor;  /* May be 1, 16, 32, or 64 */
-	int baud;
-	int			magic;
-	int			baud_base;
-	int			port;
-	int			irq;
-	int			flags; 		/* defined in tty.h */
-	int			type; 		/* UART type */
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			xmit_fifo_size;
-	int			custom_divisor;
-	int			x_char;	/* xon/xoff character */
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	unsigned long		event;
-	unsigned long		last_active;
-	int			line;
-	int			count;	    /* # of fd on device */
-	int			blocked_open; /* # of blocked opens */
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-};
-
-
-#define SERIAL_MAGIC 0x5301
-
-/*
- * The size of the serial xmit buffer is 1 page, or 4096 bytes
- */
-#define SERIAL_XMIT_SIZE 4096
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP	0
-
-/* 
- * Define the number of ports supported and their irqs.
- */
-#define NR_PORTS 1
-#define UART_IRQ_DEFNS {UART_IRQ_NUM}
-
-#endif /* __KERNEL__ */
-#endif /* !(_MC683XX_SERIAL_H) */
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 5c27f7e6c9f1..47d061b9ad4d 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -284,7 +284,20 @@ static const struct serial8250_config uart_config[] = {
 	},
 };
 
-#if defined(CONFIG_MIPS_ALCHEMY)
+/* Uart divisor latch read */
+static int default_serial_dl_read(struct uart_8250_port *up)
+{
+	return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static void default_serial_dl_write(struct uart_8250_port *up, int value)
+{
+	serial_out(up, UART_DLL, value & 0xff);
+	serial_out(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#ifdef CONFIG_MIPS_ALCHEMY
 
 /* Au1x00 UART hardware has a weird register layout */
 static const u8 au_io_in_map[] = {
@@ -305,22 +318,32 @@ static const u8 au_io_out_map[] = {
 	[UART_MCR] = 6,
 };
 
-/* sane hardware needs no mapping */
-static inline int map_8250_in_reg(struct uart_port *p, int offset)
+static unsigned int au_serial_in(struct uart_port *p, int offset)
+{
+	offset = au_io_in_map[offset] << p->regshift;
+	return __raw_readl(p->membase + offset);
+}
+
+static void au_serial_out(struct uart_port *p, int offset, int value)
+{
+	offset = au_io_out_map[offset] << p->regshift;
+	__raw_writel(value, p->membase + offset);
+}
+
+/* Au1x00 haven't got a standard divisor latch */
+static int au_serial_dl_read(struct uart_8250_port *up)
 {
-	if (p->iotype != UPIO_AU)
-		return offset;
-	return au_io_in_map[offset];
+	return __raw_readl(up->port.membase + 0x28);
 }
 
-static inline int map_8250_out_reg(struct uart_port *p, int offset)
+static void au_serial_dl_write(struct uart_8250_port *up, int value)
 {
-	if (p->iotype != UPIO_AU)
-		return offset;
-	return au_io_out_map[offset];
+	__raw_writel(value, up->port.membase + 0x28);
 }
 
-#elif defined(CONFIG_SERIAL_8250_RM9K)
+#endif
+
+#ifdef CONFIG_SERIAL_8250_RM9K
 
 static const u8
 	regmap_in[8] = {
@@ -344,87 +367,79 @@ static const u8
 		[UART_SCR]	= 0x2c
 	};
 
-static inline int map_8250_in_reg(struct uart_port *p, int offset)
+static unsigned int rm9k_serial_in(struct uart_port *p, int offset)
 {
-	if (p->iotype != UPIO_RM9000)
-		return offset;
-	return regmap_in[offset];
+	offset = regmap_in[offset] << p->regshift;
+	return readl(p->membase + offset);
 }
 
-static inline int map_8250_out_reg(struct uart_port *p, int offset)
+static void rm9k_serial_out(struct uart_port *p, int offset, int value)
 {
-	if (p->iotype != UPIO_RM9000)
-		return offset;
-	return regmap_out[offset];
+	offset = regmap_out[offset] << p->regshift;
+	writel(value, p->membase + offset);
 }
 
-#else
+static int rm9k_serial_dl_read(struct uart_8250_port *up)
+{
+	return ((__raw_readl(up->port.membase + 0x10) << 8) |
+		(__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff;
+}
 
-/* sane hardware needs no mapping */
-#define map_8250_in_reg(up, offset) (offset)
-#define map_8250_out_reg(up, offset) (offset)
+static void rm9k_serial_dl_write(struct uart_8250_port *up, int value)
+{
+	__raw_writel(value, up->port.membase + 0x08);
+	__raw_writel(value >> 8, up->port.membase + 0x10);
+}
 
 #endif
 
 static unsigned int hub6_serial_in(struct uart_port *p, int offset)
 {
-	offset = map_8250_in_reg(p, offset) << p->regshift;
+	offset = offset << p->regshift;
 	outb(p->hub6 - 1 + offset, p->iobase);
 	return inb(p->iobase + 1);
 }
 
 static void hub6_serial_out(struct uart_port *p, int offset, int value)
 {
-	offset = map_8250_out_reg(p, offset) << p->regshift;
+	offset = offset << p->regshift;
 	outb(p->hub6 - 1 + offset, p->iobase);
 	outb(value, p->iobase + 1);
 }
 
 static unsigned int mem_serial_in(struct uart_port *p, int offset)
 {
-	offset = map_8250_in_reg(p, offset) << p->regshift;
+	offset = offset << p->regshift;
 	return readb(p->membase + offset);
 }
 
 static void mem_serial_out(struct uart_port *p, int offset, int value)
 {
-	offset = map_8250_out_reg(p, offset) << p->regshift;
+	offset = offset << p->regshift;
 	writeb(value, p->membase + offset);
 }
 
 static void mem32_serial_out(struct uart_port *p, int offset, int value)
 {
-	offset = map_8250_out_reg(p, offset) << p->regshift;
+	offset = offset << p->regshift;
 	writel(value, p->membase + offset);
 }
 
 static unsigned int mem32_serial_in(struct uart_port *p, int offset)
 {
-	offset = map_8250_in_reg(p, offset) << p->regshift;
+	offset = offset << p->regshift;
 	return readl(p->membase + offset);
 }
 
-static unsigned int au_serial_in(struct uart_port *p, int offset)
-{
-	offset = map_8250_in_reg(p, offset) << p->regshift;
-	return __raw_readl(p->membase + offset);
-}
-
-static void au_serial_out(struct uart_port *p, int offset, int value)
-{
-	offset = map_8250_out_reg(p, offset) << p->regshift;
-	__raw_writel(value, p->membase + offset);
-}
-
 static unsigned int io_serial_in(struct uart_port *p, int offset)
 {
-	offset = map_8250_in_reg(p, offset) << p->regshift;
+	offset = offset << p->regshift;
 	return inb(p->iobase + offset);
 }
 
 static void io_serial_out(struct uart_port *p, int offset, int value)
 {
-	offset = map_8250_out_reg(p, offset) << p->regshift;
+	offset = offset << p->regshift;
 	outb(value, p->iobase + offset);
 }
 
@@ -434,6 +449,10 @@ static void set_io_from_upio(struct uart_port *p)
 {
 	struct uart_8250_port *up =
 		container_of(p, struct uart_8250_port, port);
+
+	up->dl_read = default_serial_dl_read;
+	up->dl_write = default_serial_dl_write;
+
 	switch (p->iotype) {
 	case UPIO_HUB6:
 		p->serial_in = hub6_serial_in;
@@ -445,16 +464,28 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = mem_serial_out;
 		break;
 
-	case UPIO_RM9000:
 	case UPIO_MEM32:
 		p->serial_in = mem32_serial_in;
 		p->serial_out = mem32_serial_out;
 		break;
 
+#ifdef CONFIG_SERIAL_8250_RM9K
+	case UPIO_RM9000:
+		p->serial_in = rm9k_serial_in;
+		p->serial_out = rm9k_serial_out;
+		up->dl_read = rm9k_serial_dl_read;
+		up->dl_write = rm9k_serial_dl_write;
+		break;
+#endif
+
+#ifdef CONFIG_MIPS_ALCHEMY
 	case UPIO_AU:
 		p->serial_in = au_serial_in;
 		p->serial_out = au_serial_out;
+		up->dl_read = au_serial_dl_read;
+		up->dl_write = au_serial_dl_write;
 		break;
+#endif
 
 	default:
 		p->serial_in = io_serial_in;
@@ -481,59 +512,6 @@ serial_port_out_sync(struct uart_port *p, int offset, int value)
 	}
 }
 
-/* Uart divisor latch read */
-static inline int _serial_dl_read(struct uart_8250_port *up)
-{
-	return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
-}
-
-/* Uart divisor latch write */
-static inline void _serial_dl_write(struct uart_8250_port *up, int value)
-{
-	serial_out(up, UART_DLL, value & 0xff);
-	serial_out(up, UART_DLM, value >> 8 & 0xff);
-}
-
-#if defined(CONFIG_MIPS_ALCHEMY)
-/* Au1x00 haven't got a standard divisor latch */
-static int serial_dl_read(struct uart_8250_port *up)
-{
-	if (up->port.iotype == UPIO_AU)
-		return __raw_readl(up->port.membase + 0x28);
-	else
-		return _serial_dl_read(up);
-}
-
-static void serial_dl_write(struct uart_8250_port *up, int value)
-{
-	if (up->port.iotype == UPIO_AU)
-		__raw_writel(value, up->port.membase + 0x28);
-	else
-		_serial_dl_write(up, value);
-}
-#elif defined(CONFIG_SERIAL_8250_RM9K)
-static int serial_dl_read(struct uart_8250_port *up)
-{
-	return	(up->port.iotype == UPIO_RM9000) ?
-		(((__raw_readl(up->port.membase + 0x10) << 8) |
-		(__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) :
-		_serial_dl_read(up);
-}
-
-static void serial_dl_write(struct uart_8250_port *up, int value)
-{
-	if (up->port.iotype == UPIO_RM9000) {
-		__raw_writel(value, up->port.membase + 0x08);
-		__raw_writel(value >> 8, up->port.membase + 0x10);
-	} else {
-		_serial_dl_write(up, value);
-	}
-}
-#else
-#define serial_dl_read(up) _serial_dl_read(up)
-#define serial_dl_write(up, value) _serial_dl_write(up, value)
-#endif
-
 /*
  * For the 16C950
  */
@@ -568,6 +546,16 @@ static void serial8250_clear_fifos(struct uart_8250_port *p)
 	}
 }
 
+void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p)
+{
+	unsigned char fcr;
+
+	serial8250_clear_fifos(p);
+	fcr = uart_config[p->port.type].fcr;
+	serial_out(p, UART_FCR, fcr);
+}
+EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos);
+
 /*
  * IER sleep support.  UARTs which have EFRs need the "extended
  * capability" bit enabled.  Note that on XR16C850s, we need to
@@ -1332,27 +1320,6 @@ static void serial8250_enable_ms(struct uart_port *port)
 }
 
 /*
- * Clear the Tegra rx fifo after a break
- *
- * FIXME: This needs to become a port specific callback once we have a
- * framework for this
- */
-static void clear_rx_fifo(struct uart_8250_port *up)
-{
-	unsigned int status, tmout = 10000;
-	do {
-		status = serial_in(up, UART_LSR);
-		if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
-			status = serial_in(up, UART_RX);
-		else
-			break;
-		if (--tmout == 0)
-			break;
-		udelay(1);
-	} while (1);
-}
-
-/*
  * serial8250_rx_chars: processes according to the passed in LSR
  * value, and returns the remaining LSR bits not handled
  * by this Rx routine.
@@ -1386,20 +1353,10 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
 		up->lsr_saved_flags = 0;
 
 		if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
-			/*
-			 * For statistics only
-			 */
 			if (lsr & UART_LSR_BI) {
 				lsr &= ~(UART_LSR_FE | UART_LSR_PE);
 				port->icount.brk++;
 				/*
-				 * If tegra port then clear the rx fifo to
-				 * accept another break/character.
-				 */
-				if (port->type == PORT_TEGRA)
-					clear_rx_fifo(up);
-
-				/*
 				 * We do the SysRQ and SAK checking
 				 * here because otherwise the break
 				 * may get masked by ignore_status_mask
@@ -2280,10 +2237,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		quot++;
 
 	if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
-		if (baud < 2400)
-			fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
-		else
-			fcr = uart_config[port->type].fcr;
+		fcr = uart_config[port->type].fcr;
+		if (baud < 2400) {
+			fcr &= ~UART_FCR_TRIGGER_MASK;
+			fcr |= UART_FCR_TRIGGER_1;
+		}
 	}
 
 	/*
@@ -3037,6 +2995,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 		port.serial_in		= p->serial_in;
 		port.serial_out		= p->serial_out;
 		port.handle_irq		= p->handle_irq;
+		port.handle_break	= p->handle_break;
 		port.set_termios	= p->set_termios;
 		port.pm			= p->pm;
 		port.dev		= &dev->dev;
@@ -3153,7 +3112,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
 }
 
 /**
- *	serial8250_register_port - register a serial port
+ *	serial8250_register_8250_port - register a serial port
  *	@port: serial port template
  *
  *	Configure the serial port specified by the request. If the
@@ -3165,50 +3124,56 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
  *
  *	On success the port is ready to use and the line number is returned.
  */
-int serial8250_register_port(struct uart_port *port)
+int serial8250_register_8250_port(struct uart_8250_port *up)
 {
 	struct uart_8250_port *uart;
 	int ret = -ENOSPC;
 
-	if (port->uartclk == 0)
+	if (up->port.uartclk == 0)
 		return -EINVAL;
 
 	mutex_lock(&serial_mutex);
 
-	uart = serial8250_find_match_or_unused(port);
+	uart = serial8250_find_match_or_unused(&up->port);
 	if (uart) {
 		uart_remove_one_port(&serial8250_reg, &uart->port);
 
-		uart->port.iobase       = port->iobase;
-		uart->port.membase      = port->membase;
-		uart->port.irq          = port->irq;
-		uart->port.irqflags     = port->irqflags;
-		uart->port.uartclk      = port->uartclk;
-		uart->port.fifosize     = port->fifosize;
-		uart->port.regshift     = port->regshift;
-		uart->port.iotype       = port->iotype;
-		uart->port.flags        = port->flags | UPF_BOOT_AUTOCONF;
-		uart->port.mapbase      = port->mapbase;
-		uart->port.private_data = port->private_data;
-		if (port->dev)
-			uart->port.dev = port->dev;
-
-		if (port->flags & UPF_FIXED_TYPE)
-			serial8250_init_fixed_type_port(uart, port->type);
+		uart->port.iobase       = up->port.iobase;
+		uart->port.membase      = up->port.membase;
+		uart->port.irq          = up->port.irq;
+		uart->port.irqflags     = up->port.irqflags;
+		uart->port.uartclk      = up->port.uartclk;
+		uart->port.fifosize     = up->port.fifosize;
+		uart->port.regshift     = up->port.regshift;
+		uart->port.iotype       = up->port.iotype;
+		uart->port.flags        = up->port.flags | UPF_BOOT_AUTOCONF;
+		uart->port.mapbase      = up->port.mapbase;
+		uart->port.private_data = up->port.private_data;
+		if (up->port.dev)
+			uart->port.dev = up->port.dev;
+
+		if (up->port.flags & UPF_FIXED_TYPE)
+			serial8250_init_fixed_type_port(uart, up->port.type);
 
 		set_io_from_upio(&uart->port);
 		/* Possibly override default I/O functions.  */
-		if (port->serial_in)
-			uart->port.serial_in = port->serial_in;
-		if (port->serial_out)
-			uart->port.serial_out = port->serial_out;
-		if (port->handle_irq)
-			uart->port.handle_irq = port->handle_irq;
+		if (up->port.serial_in)
+			uart->port.serial_in = up->port.serial_in;
+		if (up->port.serial_out)
+			uart->port.serial_out = up->port.serial_out;
+		if (up->port.handle_irq)
+			uart->port.handle_irq = up->port.handle_irq;
 		/*  Possibly override set_termios call */
-		if (port->set_termios)
-			uart->port.set_termios = port->set_termios;
-		if (port->pm)
-			uart->port.pm = port->pm;
+		if (up->port.set_termios)
+			uart->port.set_termios = up->port.set_termios;
+		if (up->port.pm)
+			uart->port.pm = up->port.pm;
+		if (up->port.handle_break)
+			uart->port.handle_break = up->port.handle_break;
+		if (up->dl_read)
+			uart->dl_read = up->dl_read;
+		if (up->dl_write)
+			uart->dl_write = up->dl_write;
 
 		if (serial8250_isa_config != NULL)
 			serial8250_isa_config(0, &uart->port,
@@ -3222,6 +3187,29 @@ int serial8250_register_port(struct uart_port *port)
 
 	return ret;
 }
+EXPORT_SYMBOL(serial8250_register_8250_port);
+
+/**
+ *	serial8250_register_port - register a serial port
+ *	@port: serial port template
+ *
+ *	Configure the serial port specified by the request. If the
+ *	port exists and is in use, it is hung up and unregistered
+ *	first.
+ *
+ *	The port is then probed and if necessary the IRQ is autodetected
+ *	If this fails an error is returned.
+ *
+ *	On success the port is ready to use and the line number is returned.
+ */
+int serial8250_register_port(struct uart_port *port)
+{
+	struct uart_8250_port up;
+
+	memset(&up, 0, sizeof(up));
+	memcpy(&up.port, port, sizeof(*port));
+	return serial8250_register_8250_port(&up);
+}
 EXPORT_SYMBOL(serial8250_register_port);
 
 /**
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 2868a1da254d..f9719d167c8d 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -37,6 +37,10 @@ struct uart_8250_port {
 	unsigned char		lsr_saved_flags;
 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
 	unsigned char		msr_saved_flags;
+
+	/* 8250 specific callbacks */
+	int			(*dl_read)(struct uart_8250_port *);
+	void			(*dl_write)(struct uart_8250_port *, int);
 };
 
 struct old_serial_port {
@@ -96,6 +100,18 @@ static inline void serial_out(struct uart_8250_port *up, int offset, int value)
 	up->port.serial_out(&up->port, offset, value);
 }
 
+void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p);
+
+static inline int serial_dl_read(struct uart_8250_port *up)
+{
+	return up->dl_read(up);
+}
+
+static inline void serial_dl_write(struct uart_8250_port *up, int value)
+{
+	up->dl_write(up, value);
+}
+
 #if defined(__alpha__) && !defined(CONFIG_PCI)
 /*
  * Digital did something really horribly wrong with the OUT1 and OUT2
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
new file mode 100644
index 000000000000..3a0363e7f3a7
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -0,0 +1,186 @@
+/*
+ * Renesas Emma Mobile 8250 driver
+ *
+ *  Copyright (C) 2012 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include "8250.h"
+
+#define UART_DLL_EM 9
+#define UART_DLM_EM 10
+
+struct serial8250_em_priv {
+	struct clk *sclk;
+	int line;
+};
+
+static void serial8250_em_serial_out(struct uart_port *p, int offset, int value)
+{
+	switch (offset) {
+	case UART_TX: /* TX @ 0x00 */
+		writeb(value, p->membase);
+		break;
+	case UART_FCR: /* FCR @ 0x0c (+1) */
+	case UART_LCR: /* LCR @ 0x10 (+1) */
+	case UART_MCR: /* MCR @ 0x14 (+1) */
+	case UART_SCR: /* SCR @ 0x20 (+1) */
+		writel(value, p->membase + ((offset + 1) << 2));
+		break;
+	case UART_IER: /* IER @ 0x04 */
+		value &= 0x0f; /* only 4 valid bits - not Xscale */
+		/* fall-through */
+	case UART_DLL_EM: /* DLL @ 0x24 (+9) */
+	case UART_DLM_EM: /* DLM @ 0x28 (+9) */
+		writel(value, p->membase + (offset << 2));
+	}
+}
+
+static unsigned int serial8250_em_serial_in(struct uart_port *p, int offset)
+{
+	switch (offset) {
+	case UART_RX: /* RX @ 0x00 */
+		return readb(p->membase);
+	case UART_MCR: /* MCR @ 0x14 (+1) */
+	case UART_LSR: /* LSR @ 0x18 (+1) */
+	case UART_MSR: /* MSR @ 0x1c (+1) */
+	case UART_SCR: /* SCR @ 0x20 (+1) */
+		return readl(p->membase + ((offset + 1) << 2));
+	case UART_IER: /* IER @ 0x04 */
+	case UART_IIR: /* IIR @ 0x08 */
+	case UART_DLL_EM: /* DLL @ 0x24 (+9) */
+	case UART_DLM_EM: /* DLM @ 0x28 (+9) */
+		return readl(p->membase + (offset << 2));
+	}
+	return 0;
+}
+
+static int serial8250_em_serial_dl_read(struct uart_8250_port *up)
+{
+	return serial_in(up, UART_DLL_EM) | serial_in(up, UART_DLM_EM) << 8;
+}
+
+static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value)
+{
+	serial_out(up, UART_DLL_EM, value & 0xff);
+	serial_out(up, UART_DLM_EM, value >> 8 & 0xff);
+}
+
+static int __devinit serial8250_em_probe(struct platform_device *pdev)
+{
+	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	struct serial8250_em_priv *priv;
+	struct uart_8250_port up;
+	int ret = -EINVAL;
+
+	if (!regs || !irq) {
+		dev_err(&pdev->dev, "missing registers or irq\n");
+		goto err0;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "unable to allocate private data\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	priv->sclk = clk_get(&pdev->dev, "sclk");
+	if (IS_ERR(priv->sclk)) {
+		dev_err(&pdev->dev, "unable to get clock\n");
+		ret = PTR_ERR(priv->sclk);
+		goto err1;
+	}
+
+	memset(&up, 0, sizeof(up));
+	up.port.mapbase = regs->start;
+	up.port.irq = irq->start;
+	up.port.type = PORT_UNKNOWN;
+	up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
+	up.port.dev = &pdev->dev;
+	up.port.private_data = priv;
+
+	clk_enable(priv->sclk);
+	up.port.uartclk = clk_get_rate(priv->sclk);
+
+	up.port.iotype = UPIO_MEM32;
+	up.port.serial_in = serial8250_em_serial_in;
+	up.port.serial_out = serial8250_em_serial_out;
+	up.dl_read = serial8250_em_serial_dl_read;
+	up.dl_write = serial8250_em_serial_dl_write;
+
+	ret = serial8250_register_8250_port(&up);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to register 8250 port\n");
+		goto err2;
+	}
+
+	priv->line = ret;
+	platform_set_drvdata(pdev, priv);
+	return 0;
+
+ err2:
+	clk_disable(priv->sclk);
+	clk_put(priv->sclk);
+ err1:
+	kfree(priv);
+ err0:
+	return ret;
+}
+
+static int __devexit serial8250_em_remove(struct platform_device *pdev)
+{
+	struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
+
+	serial8250_unregister_port(priv->line);
+	clk_disable(priv->sclk);
+	clk_put(priv->sclk);
+	kfree(priv);
+	return 0;
+}
+
+static const struct of_device_id serial8250_em_dt_ids[] __devinitconst = {
+	{ .compatible = "renesas,em-uart", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, serial8250_em_dt_ids);
+
+static struct platform_driver serial8250_em_platform_driver = {
+	.driver = {
+		.name		= "serial8250-em",
+		.of_match_table = serial8250_em_dt_ids,
+		.owner		= THIS_MODULE,
+	},
+	.probe			= serial8250_em_probe,
+	.remove			= __devexit_p(serial8250_em_remove),
+};
+
+module_platform_driver(serial8250_em_platform_driver);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas Emma Mobile 8250 Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 858dca865d6a..28e7c7cce893 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -17,6 +17,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/tty.h>
+#include <linux/serial_reg.h>
 #include <linux/serial_core.h>
 #include <linux/8250_pci.h>
 #include <linux/bitops.h>
@@ -1092,11 +1093,49 @@ static int skip_tx_en_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, port, idx);
 }
 
+static void kt_handle_break(struct uart_port *p)
+{
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
+	/*
+	 * On receipt of a BI, serial device in Intel ME (Intel
+	 * management engine) needs to have its fifos cleared for sane
+	 * SOL (Serial Over Lan) output.
+	 */
+	serial8250_clear_and_reinit_fifos(up);
+}
+
+static unsigned int kt_serial_in(struct uart_port *p, int offset)
+{
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
+	unsigned int val;
+
+	/*
+	 * When the Intel ME (management engine) gets reset its serial
+	 * port registers could return 0 momentarily.  Functions like
+	 * serial8250_console_write, read and save the IER, perform
+	 * some operation and then restore it.  In order to avoid
+	 * setting IER register inadvertently to 0, if the value read
+	 * is 0, double check with ier value in uart_8250_port and use
+	 * that instead.  up->ier should be the same value as what is
+	 * currently configured.
+	 */
+	val = inb(p->iobase + offset);
+	if (offset == UART_IER) {
+		if (val == 0)
+			val = up->ier;
+	}
+	return val;
+}
+
 static int kt_serial_setup(struct serial_private *priv,
 			   const struct pciserial_board *board,
 			   struct uart_port *port, int idx)
 {
 	port->flags |= UPF_BUG_THRE;
+	port->serial_in = kt_serial_in;
+	port->handle_break = kt_handle_break;
 	return skip_tx_en_setup(priv, board, port, idx);
 }
 
@@ -1609,54 +1648,72 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8811,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8812,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8813,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8814,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8027,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8028,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x8029,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x800C,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
 	{
 		.vendor         = 0x10DB,
 		.device         = 0x800D,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
 		.init		= pci_eg20t_init,
 		.setup		= pci_default_setup,
 	},
@@ -2775,6 +2832,12 @@ void pciserial_suspend_ports(struct serial_private *priv)
 	for (i = 0; i < priv->nr; i++)
 		if (priv->line[i] >= 0)
 			serial8250_suspend_port(priv->line[i]);
+
+	/*
+	 * Ensure that every init quirk is properly torn down
+	 */
+	if (priv->quirk->exit)
+		priv->quirk->exit(priv->dev);
 }
 EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
 
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 591f8018e7dd..8bc7ecbf6bea 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -278,3 +278,11 @@ config SERIAL_8250_DW
 	help
 	  Selecting this option will enable handling of the extra features
 	  present in the Synopsys DesignWare APB UART.
+
+config SERIAL_8250_EM
+	tristate "Support for Emma Mobile intergrated serial port"
+	depends on SERIAL_8250 && ARM && HAVE_CLK
+	help
+	  Selecting this option will add support for the integrated serial
+	  port hardware found on the Emma Mobile line of processors.
+	  If unsure, say N.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 867bba738908..3f35eacdf673 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
 obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
 obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o
 obj-$(CONFIG_SERIAL_8250_DW)		+= 8250_dw.o
+obj-$(CONFIG_SERIAL_8250_EM)		+= 8250_em.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 062ef8c2b3cb..4ad721fb8405 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -68,30 +68,6 @@
 #define UART_DR_ERROR		(UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
 #define UART_DUMMY_DR_RX	(1 << 16)
 
-
-#define UART_WA_SAVE_NR 14
-
-static void pl011_lockup_wa(unsigned long data);
-static const u32 uart_wa_reg[UART_WA_SAVE_NR] = {
-	ST_UART011_DMAWM,
-	ST_UART011_TIMEOUT,
-	ST_UART011_LCRH_RX,
-	UART011_IBRD,
-	UART011_FBRD,
-	ST_UART011_LCRH_TX,
-	UART011_IFLS,
-	ST_UART011_XFCR,
-	ST_UART011_XON1,
-	ST_UART011_XON2,
-	ST_UART011_XOFF1,
-	ST_UART011_XOFF2,
-	UART011_CR,
-	UART011_IMSC
-};
-
-static u32 uart_wa_regdata[UART_WA_SAVE_NR];
-static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0);
-
 /* There is by now at least one vendor with differing details, so handle it */
 struct vendor_data {
 	unsigned int		ifls;
@@ -101,6 +77,7 @@ struct vendor_data {
 	bool			oversampling;
 	bool			interrupt_may_hang;   /* vendor-specific */
 	bool			dma_threshold;
+	bool			cts_event_workaround;
 };
 
 static struct vendor_data vendor_arm = {
@@ -110,6 +87,7 @@ static struct vendor_data vendor_arm = {
 	.lcrh_rx		= UART011_LCRH,
 	.oversampling		= false,
 	.dma_threshold		= false,
+	.cts_event_workaround	= false,
 };
 
 static struct vendor_data vendor_st = {
@@ -120,6 +98,7 @@ static struct vendor_data vendor_st = {
 	.oversampling		= true,
 	.interrupt_may_hang	= true,
 	.dma_threshold		= true,
+	.cts_event_workaround	= true,
 };
 
 static struct uart_amba_port *amba_ports[UART_NR];
@@ -1055,69 +1034,6 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
 #define pl011_dma_flush_buffer	NULL
 #endif
 
-
-/*
- * pl011_lockup_wa
- * This workaround aims to break the deadlock situation
- * when after long transfer over uart in hardware flow
- * control, uart interrupt registers cannot be cleared.
- * Hence uart transfer gets blocked.
- *
- * It is seen that during such deadlock condition ICR
- * don't get cleared even on multiple write. This leads
- * pass_counter to decrease and finally reach zero. This
- * can be taken as trigger point to run this UART_BT_WA.
- *
- */
-static void pl011_lockup_wa(unsigned long data)
-{
-	struct uart_amba_port *uap = amba_ports[0];
-	void __iomem *base = uap->port.membase;
-	struct circ_buf *xmit = &uap->port.state->xmit;
-	struct tty_struct *tty = uap->port.state->port.tty;
-	int buf_empty_retries = 200;
-	int loop;
-
-	/* Stop HCI layer from submitting data for tx */
-	tty->hw_stopped = 1;
-	while (!uart_circ_empty(xmit)) {
-		if (buf_empty_retries-- == 0)
-			break;
-		udelay(100);
-	}
-
-	/* Backup registers */
-	for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
-		uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]);
-
-	/* Disable UART so that FIFO data is flushed out */
-	writew(0x00, uap->port.membase + UART011_CR);
-
-	/* Soft reset UART module */
-	if (uap->port.dev->platform_data) {
-		struct amba_pl011_data *plat;
-
-		plat = uap->port.dev->platform_data;
-		if (plat->reset)
-			plat->reset();
-	}
-
-	/* Restore registers */
-	for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
-		writew(uart_wa_regdata[loop] ,
-				uap->port.membase + uart_wa_reg[loop]);
-
-	/* Initialise the old status of the modem signals */
-	uap->old_status = readw(uap->port.membase + UART01x_FR) &
-		UART01x_FR_MODEM_ANY;
-
-	if (readl(base + UART011_MIS) & 0x2)
-		printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n");
-
-	/* Start Tx/Rx */
-	tty->hw_stopped = 0;
-}
-
 static void pl011_stop_tx(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1246,12 +1162,26 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 	unsigned long flags;
 	unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
 	int handled = 0;
+	unsigned int dummy_read;
 
 	spin_lock_irqsave(&uap->port.lock, flags);
 
 	status = readw(uap->port.membase + UART011_MIS);
 	if (status) {
 		do {
+			if (uap->vendor->cts_event_workaround) {
+				/* workaround to make sure that all bits are unlocked.. */
+				writew(0x00, uap->port.membase + UART011_ICR);
+
+				/*
+				 * WA: introduce 26ns(1 uart clk) delay before W1C;
+				 * single apb access will incur 2 pclk(133.12Mhz) delay,
+				 * so add 2 dummy reads
+				 */
+				dummy_read = readw(uap->port.membase + UART011_ICR);
+				dummy_read = readw(uap->port.membase + UART011_ICR);
+			}
+
 			writew(status & ~(UART011_TXIS|UART011_RTIS|
 					  UART011_RXIS),
 			       uap->port.membase + UART011_ICR);
@@ -1268,11 +1198,8 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 			if (status & UART011_TXIS)
 				pl011_tx_chars(uap);
 
-			if (pass_counter-- == 0) {
-				if (uap->interrupt_may_hang)
-					tasklet_schedule(&pl011_lockup_tlet);
+			if (pass_counter-- == 0)
 				break;
-			}
 
 			status = readw(uap->port.membase + UART011_MIS);
 		} while (status != 0);
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 5832fdef11e9..bd97db23985b 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -1,7 +1,7 @@
 /*
  * Blackfin On-Chip Serial Driver
  *
- * Copyright 2006-2010 Analog Devices Inc.
+ * Copyright 2006-2011 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
@@ -35,10 +35,6 @@
 #include <asm/portmux.h>
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
-
-#define port_membase(uart)     (((struct bfin_serial_port *)(uart))->port.membase)
-#define get_lsr_cache(uart)    (((struct bfin_serial_port *)(uart))->lsr)
-#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v))
 #include <asm/bfin_serial.h>
 
 #ifdef CONFIG_SERIAL_BFIN_MODULE
@@ -166,7 +162,7 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 	uart->tx_count = 0;
 	uart->tx_done = 1;
 #else
-#ifdef CONFIG_BF54x
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
 	/* Clear TFI bit */
 	UART_PUT_LSR(uart, TFI);
 #endif
@@ -337,7 +333,7 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 	struct circ_buf *xmit = &uart->port.state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
-#ifdef CONFIG_BF54x
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
 		/* Clear TFI bit */
 		UART_PUT_LSR(uart, TFI);
 #endif
@@ -536,7 +532,7 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 		 */
 		UART_CLEAR_IER(uart, ETBEI);
 		uart->port.icount.tx += uart->tx_count;
-		if (!uart_circ_empty(xmit)) {
+		if (!(xmit->tail == 0 && xmit->head == 0)) {
 			xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
 
 			if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -553,7 +549,7 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
-	unsigned short irqstat;
+	unsigned int irqstat;
 	int x_pos, pos;
 
 	spin_lock(&uart->rx_lock);
@@ -586,7 +582,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
 static unsigned int bfin_serial_tx_empty(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-	unsigned short lsr;
+	unsigned int lsr;
 
 	lsr = UART_GET_LSR(uart);
 	if (lsr & TEMT)
@@ -598,7 +594,7 @@ static unsigned int bfin_serial_tx_empty(struct uart_port *port)
 static void bfin_serial_break_ctl(struct uart_port *port, int break_state)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-	u16 lcr = UART_GET_LCR(uart);
+	u32 lcr = UART_GET_LCR(uart);
 	if (break_state)
 		lcr |= SB;
 	else
@@ -745,7 +741,7 @@ static int bfin_serial_startup(struct uart_port *port)
 		}
 
 		/* CTS RTS PINs are negative assertive. */
-		UART_PUT_MCR(uart, ACTS);
+		UART_PUT_MCR(uart, UART_GET_MCR(uart) | ACTS);
 		UART_SET_IER(uart, EDSSI);
 	}
 #endif
@@ -803,7 +799,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
 	unsigned long flags;
 	unsigned int baud, quot;
-	unsigned short val, ier, lcr = 0;
+	unsigned int ier, lcr = 0;
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS8:
@@ -875,26 +871,23 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/* Disable UART */
 	ier = UART_GET_IER(uart);
+	UART_PUT_GCTL(uart, UART_GET_GCTL(uart) & ~UCEN);
 	UART_DISABLE_INTS(uart);
 
-	/* Set DLAB in LCR to Access DLL and DLH */
+	/* Set DLAB in LCR to Access CLK */
 	UART_SET_DLAB(uart);
 
-	UART_PUT_DLL(uart, quot & 0xFF);
-	UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
+	UART_PUT_CLK(uart, quot);
 	SSYNC();
 
 	/* Clear DLAB in LCR to Access THR RBR IER */
 	UART_CLEAR_DLAB(uart);
 
-	UART_PUT_LCR(uart, lcr);
+	UART_PUT_LCR(uart, (UART_GET_LCR(uart) & ~LCR_MASK) | lcr);
 
 	/* Enable UART */
 	UART_ENABLE_INTS(uart, ier);
-
-	val = UART_GET_GCTL(uart);
-	val |= UCEN;
-	UART_PUT_GCTL(uart, val);
+	UART_PUT_GCTL(uart, UART_GET_GCTL(uart) | UCEN);
 
 	/* Port speed changed, update the per-port timeout. */
 	uart_update_timeout(port, termios->c_cflag, baud);
@@ -954,17 +947,17 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
 static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-	unsigned short val;
+	unsigned int val;
 
 	switch (ld) {
 	case N_IRDA:
 		val = UART_GET_GCTL(uart);
-		val |= (IREN | RPOLC);
+		val |= (UMOD_IRDA | RPOLC);
 		UART_PUT_GCTL(uart, val);
 		break;
 	default:
 		val = UART_GET_GCTL(uart);
-		val &= ~(IREN | RPOLC);
+		val &= ~(UMOD_MASK | RPOLC);
 		UART_PUT_GCTL(uart, val);
 	}
 }
@@ -972,13 +965,13 @@ static void bfin_serial_set_ldisc(struct uart_port *port, int ld)
 static void bfin_serial_reset_irda(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-	unsigned short val;
+	unsigned int val;
 
 	val = UART_GET_GCTL(uart);
-	val &= ~(IREN | RPOLC);
+	val &= ~(UMOD_MASK | RPOLC);
 	UART_PUT_GCTL(uart, val);
 	SSYNC();
-	val |= (IREN | RPOLC);
+	val |= (UMOD_IRDA | RPOLC);
 	UART_PUT_GCTL(uart, val);
 	SSYNC();
 }
@@ -1070,12 +1063,12 @@ static void __init
 bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
 			   int *parity, int *bits)
 {
-	unsigned short status;
+	unsigned int status;
 
 	status = UART_GET_IER(uart) & (ERBFI | ETBEI);
 	if (status == (ERBFI | ETBEI)) {
 		/* ok, the port was enabled */
-		u16 lcr, dlh, dll;
+		u32 lcr, clk;
 
 		lcr = UART_GET_LCR(uart);
 
@@ -1086,30 +1079,17 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
 			else
 				*parity = 'o';
 		}
-		switch (lcr & 0x03) {
-		case 0:
-			*bits = 5;
-			break;
-		case 1:
-			*bits = 6;
-			break;
-		case 2:
-			*bits = 7;
-			break;
-		case 3:
-			*bits = 8;
-			break;
-		}
-		/* Set DLAB in LCR to Access DLL and DLH */
+		*bits = ((lcr & WLS_MASK) >> WLS_OFFSET) + 5;
+
+		/* Set DLAB in LCR to Access CLK */
 		UART_SET_DLAB(uart);
 
-		dll = UART_GET_DLL(uart);
-		dlh = UART_GET_DLH(uart);
+		clk = UART_GET_CLK(uart);
 
 		/* Clear DLAB in LCR to Access THR RBR IER */
 		UART_CLEAR_DLAB(uart);
 
-		*baud = get_sclk() / (16*(dll | dlh << 8));
+		*baud = get_sclk() / (16*clk);
 	}
 	pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits);
 }
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 5b07c0c3a10c..7264d4d26717 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -952,19 +952,6 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
 /* Input */
 #define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask)
 
-
-/*
- * tmp_buf is used as a temporary buffer by serial_write.  We need to
- * lock it in case the memcpy_fromfs blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char *tmp_buf;
-static DEFINE_MUTEX(tmp_buf_mutex);
-
 /* Calculate the chartime depending on baudrate, numbor of bits etc. */
 static void update_char_time(struct e100_serial * info)
 {
@@ -3150,7 +3137,7 @@ static int rs_raw_write(struct tty_struct *tty,
 
 	/* first some sanity checks */
 
-	if (!tty || !info->xmit.buf || !tmp_buf)
+	if (!tty || !info->xmit.buf)
 		return 0;
 
 #ifdef SERIAL_DEBUG_DATA
@@ -3989,7 +3976,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 	 */
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & ASYNC_CLOSING)) {
-		wait_event_interruptible_tty(info->close_wait,
+		wait_event_interruptible_tty(tty, info->close_wait,
 			!(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
 		if (info->flags & ASYNC_HUP_NOTIFY)
@@ -4065,9 +4052,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
 		printk("block_til_ready blocking: ttyS%d, count = %d\n",
 		       info->line, info->count);
 #endif
-		tty_unlock();
+		tty_unlock(tty);
 		schedule();
-		tty_lock();
+		tty_lock(tty);
 	}
 	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&info->open_wait, &wait);
@@ -4106,7 +4093,6 @@ rs_open(struct tty_struct *tty, struct file * filp)
 {
 	struct e100_serial	*info;
 	int 			retval;
-	unsigned long           page;
 	int                     allocated_resources = 0;
 
 	info = rs_table + tty->index;
@@ -4124,23 +4110,12 @@ rs_open(struct tty_struct *tty, struct file * filp)
 
 	tty->low_latency = !!(info->flags & ASYNC_LOW_LATENCY);
 
-	if (!tmp_buf) {
-		page = get_zeroed_page(GFP_KERNEL);
-		if (!page) {
-			return -ENOMEM;
-		}
-		if (tmp_buf)
-			free_page(page);
-		else
-			tmp_buf = (unsigned char *) page;
-	}
-
 	/*
 	 * If the port is in the middle of closing, bail out now
 	 */
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & ASYNC_CLOSING)) {
-		wait_event_interruptible_tty(info->close_wait,
+		wait_event_interruptible_tty(tty, info->close_wait,
 			!(info->flags & ASYNC_CLOSING));
 #ifdef SERIAL_DO_RESTART
 		return ((info->flags & ASYNC_HUP_NOTIFY) ?
@@ -4487,6 +4462,7 @@ static int __init rs_init(void)
 				info->enabled = 0;
 			}
 		}
+		tty_port_init(&info->port);
 		info->uses_dma_in = 0;
 		info->uses_dma_out = 0;
 		info->line = i;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 7081600bede4..ec56d8397aae 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -370,6 +370,8 @@ static void mxs_auart_settermios(struct uart_port *u,
 
 	writel(ctrl, u->membase + AUART_LINECTRL);
 	writel(ctrl2, u->membase + AUART_CTRL2);
+
+	uart_update_timeout(u, termios->c_cflag, baud);
 }
 
 static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index e8c9cee07d00..5410c0637266 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -12,10 +12,13 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/of_serial.h>
 #include <linux/of_platform.h>
 #include <linux/nwpserial.h>
 
@@ -24,6 +27,26 @@ struct of_serial_info {
 	int line;
 };
 
+#ifdef CONFIG_ARCH_TEGRA
+void tegra_serial_handle_break(struct uart_port *p)
+{
+	unsigned int status, tmout = 10000;
+
+	do {
+		status = p->serial_in(p, UART_LSR);
+		if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
+			status = p->serial_in(p, UART_RX);
+		else
+			break;
+		if (--tmout == 0)
+			break;
+		udelay(1);
+	} while (1);
+}
+/* FIXME remove this export when tegra finishes conversion to open firmware */
+EXPORT_SYMBOL_GPL(tegra_serial_handle_break);
+#endif
+
 /*
  * Fill a struct uart_port for a given device node
  */
@@ -84,6 +107,9 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 		| UPF_FIXED_PORT | UPF_FIXED_TYPE;
 	port->dev = &ofdev->dev;
 
+	if (type == PORT_TEGRA)
+		port->handle_break = tegra_serial_handle_break;
+
 	return 0;
 }
 
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d00b38eb268e..d3cda0cb2df0 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -44,6 +44,13 @@
 #include <plat/dmtimer.h>
 #include <plat/omap-serial.h>
 
+#define UART_BUILD_REVISION(x, y)	(((x) << 8) | (y))
+
+#define OMAP_UART_REV_42 0x0402
+#define OMAP_UART_REV_46 0x0406
+#define OMAP_UART_REV_52 0x0502
+#define OMAP_UART_REV_63 0x0603
+
 #define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/
 
 /* SCR register bitmasks */
@@ -53,6 +60,17 @@
 #define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT		6
 #define OMAP_UART_FCR_RX_FIFO_TRIG_MASK			(0x3 << 6)
 
+/* MVR register bitmasks */
+#define OMAP_UART_MVR_SCHEME_SHIFT	30
+
+#define OMAP_UART_LEGACY_MVR_MAJ_MASK	0xf0
+#define OMAP_UART_LEGACY_MVR_MAJ_SHIFT	4
+#define OMAP_UART_LEGACY_MVR_MIN_MASK	0x0f
+
+#define OMAP_UART_MVR_MAJ_MASK		0x700
+#define OMAP_UART_MVR_MAJ_SHIFT		8
+#define OMAP_UART_MVR_MIN_MASK		0x3f
+
 static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
 
 /* Forward declaration of functions */
@@ -1346,6 +1364,59 @@ static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
 	return;
 }
 
+static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
+{
+	u32 mvr, scheme;
+	u16 revision, major, minor;
+
+	mvr = serial_in(up, UART_OMAP_MVER);
+
+	/* Check revision register scheme */
+	scheme = mvr >> OMAP_UART_MVR_SCHEME_SHIFT;
+
+	switch (scheme) {
+	case 0: /* Legacy Scheme: OMAP2/3 */
+		/* MINOR_REV[0:4], MAJOR_REV[4:7] */
+		major = (mvr & OMAP_UART_LEGACY_MVR_MAJ_MASK) >>
+					OMAP_UART_LEGACY_MVR_MAJ_SHIFT;
+		minor = (mvr & OMAP_UART_LEGACY_MVR_MIN_MASK);
+		break;
+	case 1:
+		/* New Scheme: OMAP4+ */
+		/* MINOR_REV[0:5], MAJOR_REV[8:10] */
+		major = (mvr & OMAP_UART_MVR_MAJ_MASK) >>
+					OMAP_UART_MVR_MAJ_SHIFT;
+		minor = (mvr & OMAP_UART_MVR_MIN_MASK);
+		break;
+	default:
+		dev_warn(&up->pdev->dev,
+			"Unknown %s revision, defaulting to highest\n",
+			up->name);
+		/* highest possible revision */
+		major = 0xff;
+		minor = 0xff;
+	}
+
+	/* normalize revision for the driver */
+	revision = UART_BUILD_REVISION(major, minor);
+
+	switch (revision) {
+	case OMAP_UART_REV_46:
+		up->errata |= (UART_ERRATA_i202_MDR1_ACCESS |
+				UART_ERRATA_i291_DMA_FORCEIDLE);
+		break;
+	case OMAP_UART_REV_52:
+		up->errata |= (UART_ERRATA_i202_MDR1_ACCESS |
+				UART_ERRATA_i291_DMA_FORCEIDLE);
+		break;
+	case OMAP_UART_REV_63:
+		up->errata |= UART_ERRATA_i202_MDR1_ACCESS;
+		break;
+	default:
+		break;
+	}
+}
+
 static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
 {
 	struct omap_uart_port_info *omap_up_info;
@@ -1439,7 +1510,6 @@ static int serial_omap_probe(struct platform_device *pdev)
 						"%d\n", DEFAULT_CLK_SPEED);
 	}
 	up->uart_dma.uart_base = mem->start;
-	up->errata = omap_up_info->errata;
 
 	if (omap_up_info->dma_enabled) {
 		up->uart_dma.uart_dma_tx = dma_tx->start;
@@ -1469,6 +1539,8 @@ static int serial_omap_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
+	omap_serial_fill_features_erratas(up);
+
 	ui[up->port.line] = up;
 	serial_omap_add_console_port(up);
 
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index c2816f494807..4fdec6a6b758 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -39,6 +39,7 @@ enum {
 	PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
 	PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
 	PCH_UART_HANDLED_MS_INT_SHIFT,
+	PCH_UART_HANDLED_LS_INT_SHIFT,
 };
 
 enum {
@@ -63,6 +64,8 @@ enum {
 					PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
 #define PCH_UART_HANDLED_MS_INT	(1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
 
+#define PCH_UART_HANDLED_LS_INT	(1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1))
+
 #define PCH_UART_RBR		0x00
 #define PCH_UART_THR		0x00
 
@@ -229,7 +232,6 @@ struct eg20t_port {
 	int start_tx;
 	int start_rx;
 	int tx_empty;
-	int int_dis_flag;
 	int trigger;
 	int trigger_level;
 	struct pch_uart_buffer rxbuf;
@@ -237,7 +239,6 @@ struct eg20t_port {
 	unsigned int fcr;
 	unsigned int mcr;
 	unsigned int use_dma;
-	unsigned int use_dma_flag;
 	struct dma_async_tx_descriptor	*desc_tx;
 	struct dma_async_tx_descriptor	*desc_rx;
 	struct pch_dma_slave		param_tx;
@@ -560,14 +561,10 @@ static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
 	return i;
 }
 
-static unsigned int pch_uart_hal_get_iid(struct eg20t_port *priv)
+static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv)
 {
-	unsigned int iir;
-	int ret;
-
-	iir = ioread8(priv->membase + UART_IIR);
-	ret = (iir & (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP));
-	return ret;
+	return ioread8(priv->membase + UART_IIR) &\
+		      (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP);
 }
 
 static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
@@ -666,10 +663,13 @@ static void pch_free_dma(struct uart_port *port)
 		dma_release_channel(priv->chan_rx);
 		priv->chan_rx = NULL;
 	}
-	if (sg_dma_address(&priv->sg_rx))
-		dma_free_coherent(port->dev, port->fifosize,
-				  sg_virt(&priv->sg_rx),
-				  sg_dma_address(&priv->sg_rx));
+
+	if (priv->rx_buf_dma) {
+		dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt,
+				  priv->rx_buf_dma);
+		priv->rx_buf_virt = NULL;
+		priv->rx_buf_dma = 0;
+	}
 
 	return;
 }
@@ -1053,12 +1053,17 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 	unsigned int handled;
 	u8 lsr;
 	int ret = 0;
-	unsigned int iid;
+	unsigned char iid;
 	unsigned long flags;
+	int next = 1;
+	u8 msr;
 
 	spin_lock_irqsave(&priv->port.lock, flags);
 	handled = 0;
-	while ((iid = pch_uart_hal_get_iid(priv)) > 1) {
+	while (next) {
+		iid = pch_uart_hal_get_iid(priv);
+		if (iid & PCH_UART_IIR_IP) /* No Interrupt */
+			break;
 		switch (iid) {
 		case PCH_UART_IID_RLS:	/* Receiver Line Status */
 			lsr = pch_uart_hal_get_line_status(priv);
@@ -1066,6 +1071,8 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 						UART_LSR_PE | UART_LSR_OE)) {
 				pch_uart_err_ir(priv, lsr);
 				ret = PCH_UART_HANDLED_RX_ERR_INT;
+			} else {
+				ret = PCH_UART_HANDLED_LS_INT;
 			}
 			break;
 		case PCH_UART_IID_RDR:	/* Received Data Ready */
@@ -1092,20 +1099,22 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 				ret = handle_tx(priv);
 			break;
 		case PCH_UART_IID_MS:	/* Modem Status */
-			ret = PCH_UART_HANDLED_MS_INT;
+			msr = pch_uart_hal_get_modem(priv);
+			next = 0; /* MS ir prioirty is the lowest. So, MS ir
+				     means final interrupt */
+			if ((msr & UART_MSR_ANY_DELTA) == 0)
+				break;
+			ret |= PCH_UART_HANDLED_MS_INT;
 			break;
 		default:	/* Never junp to this label */
-			dev_err(priv->port.dev, "%s:iid=%d (%lu)\n", __func__,
+			dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__,
 				iid, jiffies);
 			ret = -1;
+			next = 0;
 			break;
 		}
 		handled |= (unsigned int)ret;
 	}
-	if (handled == 0 && iid <= 1) {
-		if (priv->int_dis_flag)
-			priv->int_dis_flag = 0;
-	}
 
 	spin_unlock_irqrestore(&priv->port.lock, flags);
 	return IRQ_RETVAL(handled);
@@ -1200,7 +1209,6 @@ static void pch_uart_stop_rx(struct uart_port *port)
 	priv = container_of(port, struct eg20t_port, port);
 	priv->start_rx = 0;
 	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
-	priv->int_dis_flag = 1;
 }
 
 /* Enable the modem status interrupts. */
@@ -1447,7 +1455,6 @@ static int pch_uart_verify_port(struct uart_port *port,
 			__func__);
 		return -EOPNOTSUPP;
 #endif
-		priv->use_dma_flag = 1;
 		dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n");
 		if (!priv->use_dma)
 			pch_request_dma(port);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 9c4c05b2825b..246b823c1b27 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2282,6 +2282,7 @@ void uart_unregister_driver(struct uart_driver *drv)
 	tty_unregister_driver(p);
 	put_tty_driver(p);
 	kfree(drv->state);
+	drv->state = NULL;
 	drv->tty_driver = NULL;
 }
 
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 3158e17b665c..4604153b7954 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1052,9 +1052,17 @@ static int sci_request_irq(struct sci_port *port)
 		if (SCIx_IRQ_IS_MUXED(port)) {
 			i = SCIx_MUX_IRQ;
 			irq = up->irq;
-		} else
+		} else {
 			irq = port->cfg->irqs[i];
 
+			/*
+			 * Certain port types won't support all of the
+			 * available interrupt sources.
+			 */
+			if (unlikely(!irq))
+				continue;
+		}
+
 		desc = sci_irq_desc + i;
 		port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
 					    dev_name(up->dev), desc->desc);
@@ -1094,6 +1102,15 @@ static void sci_free_irq(struct sci_port *port)
 	 * IRQ first.
 	 */
 	for (i = 0; i < SCIx_NR_IRQS; i++) {
+		unsigned int irq = port->cfg->irqs[i];
+
+		/*
+		 * Certain port types won't support all of the available
+		 * interrupt sources.
+		 */
+		if (unlikely(!irq))
+			continue;
+
 		free_irq(port->cfg->irqs[i], port);
 		kfree(port->irqstr[i]);
 
@@ -1564,10 +1581,32 @@ static void sci_enable_ms(struct uart_port *port)
 
 static void sci_break_ctl(struct uart_port *port, int break_state)
 {
-	/*
-	 * Not supported by hardware. Most parts couple break and rx
-	 * interrupts together, with break detection always enabled.
-	 */
+	struct sci_port *s = to_sci_port(port);
+	struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
+	unsigned short scscr, scsptr;
+
+	/* check wheter the port has SCSPTR */
+	if (!reg->size) {
+		/*
+		 * Not supported by hardware. Most parts couple break and rx
+		 * interrupts together, with break detection always enabled.
+		 */
+		return;
+	}
+
+	scsptr = serial_port_in(port, SCSPTR);
+	scscr = serial_port_in(port, SCSCR);
+
+	if (break_state == -1) {
+		scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT;
+		scscr &= ~SCSCR_TE;
+	} else {
+		scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO;
+		scscr |= SCSCR_TE;
+	}
+
+	serial_port_out(port, SCSPTR, scsptr);
+	serial_port_out(port, SCSCR, scscr);
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 593d40ad0a6b..5ed0daae6564 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -3338,9 +3338,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 			printk("%s(%d):block_til_ready blocking on %s count=%d\n",
 				 __FILE__,__LINE__, tty->driver->name, port->count );
 				 
-		tty_unlock();
+		tty_unlock(tty);
 		schedule();
-		tty_lock();
+		tty_lock(tty);
 	}
 	
 	set_current_state(TASK_RUNNING);
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index aa1debf97cc7..45b43f11ca39 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -3336,9 +3336,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 		}
 
 		DBGINFO(("%s block_til_ready wait\n", tty->driver->name));
-		tty_unlock();
+		tty_unlock(tty);
 		schedule();
-		tty_lock();
+		tty_lock(tty);
 	}
 
 	set_current_state(TASK_RUNNING);
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index a3dddc12d2fe..4a1e4f07765b 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -3357,9 +3357,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 			printk("%s(%d):%s block_til_ready() count=%d\n",
 				 __FILE__,__LINE__, tty->driver->name, port->count );
 
-		tty_unlock();
+		tty_unlock(tty);
 		schedule();
-		tty_lock();
+		tty_lock(tty);
 	}
 
 	set_current_state(TASK_RUNNING);
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 6c9b7cd6778a..91e326ffe7db 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -185,25 +185,19 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
 	/* Should possibly check if this fails for the largest buffer we
 	   have queued and recycle that ? */
 }
-
 /**
- *	tty_buffer_request_room		-	grow tty buffer if needed
+ *	__tty_buffer_request_room		-	grow tty buffer if needed
  *	@tty: tty structure
  *	@size: size desired
  *
  *	Make at least size bytes of linear space available for the tty
  *	buffer. If we fail return the size we managed to find.
- *
- *	Locking: Takes tty->buf.lock
+ *      Locking: Caller must hold tty->buf.lock
  */
-int tty_buffer_request_room(struct tty_struct *tty, size_t size)
+static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
 {
 	struct tty_buffer *b, *n;
 	int left;
-	unsigned long flags;
-
-	spin_lock_irqsave(&tty->buf.lock, flags);
-
 	/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
 	   remove this conditional if its worth it. This would be invisible
 	   to the callers */
@@ -225,9 +219,30 @@ int tty_buffer_request_room(struct tty_struct *tty, size_t size)
 			size = left;
 	}
 
-	spin_unlock_irqrestore(&tty->buf.lock, flags);
 	return size;
 }
+
+
+/**
+ *	tty_buffer_request_room		-	grow tty buffer if needed
+ *	@tty: tty structure
+ *	@size: size desired
+ *
+ *	Make at least size bytes of linear space available for the tty
+ *	buffer. If we fail return the size we managed to find.
+ *
+ *	Locking: Takes tty->buf.lock
+ */
+int tty_buffer_request_room(struct tty_struct *tty, size_t size)
+{
+	unsigned long flags;
+	int length;
+
+	spin_lock_irqsave(&tty->buf.lock, flags);
+	length = __tty_buffer_request_room(tty, size);
+	spin_unlock_irqrestore(&tty->buf.lock, flags);
+	return length;
+}
 EXPORT_SYMBOL_GPL(tty_buffer_request_room);
 
 /**
@@ -249,14 +264,22 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
-		int space = tty_buffer_request_room(tty, goal);
-		struct tty_buffer *tb = tty->buf.tail;
+		int space;
+		unsigned long flags;
+		struct tty_buffer *tb;
+
+		spin_lock_irqsave(&tty->buf.lock, flags);
+		space = __tty_buffer_request_room(tty, goal);
+		tb = tty->buf.tail;
 		/* If there is no space then tb may be NULL */
-		if (unlikely(space == 0))
+		if (unlikely(space == 0)) {
+			spin_unlock_irqrestore(&tty->buf.lock, flags);
 			break;
+		}
 		memcpy(tb->char_buf_ptr + tb->used, chars, space);
 		memset(tb->flag_buf_ptr + tb->used, flag, space);
 		tb->used += space;
+		spin_unlock_irqrestore(&tty->buf.lock, flags);
 		copied += space;
 		chars += space;
 		/* There is a small chance that we need to split the data over
@@ -286,14 +309,22 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
 	int copied = 0;
 	do {
 		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
-		int space = tty_buffer_request_room(tty, goal);
-		struct tty_buffer *tb = tty->buf.tail;
+		int space;
+		unsigned long __flags;
+		struct tty_buffer *tb;
+
+		spin_lock_irqsave(&tty->buf.lock, __flags);
+		space = __tty_buffer_request_room(tty, goal);
+		tb = tty->buf.tail;
 		/* If there is no space then tb may be NULL */
-		if (unlikely(space == 0))
+		if (unlikely(space == 0)) {
+			spin_unlock_irqrestore(&tty->buf.lock, __flags);
 			break;
+		}
 		memcpy(tb->char_buf_ptr + tb->used, chars, space);
 		memcpy(tb->flag_buf_ptr + tb->used, flags, space);
 		tb->used += space;
+		spin_unlock_irqrestore(&tty->buf.lock, __flags);
 		copied += space;
 		chars += space;
 		flags += space;
@@ -344,13 +375,20 @@ EXPORT_SYMBOL(tty_schedule_flip);
 int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
 								size_t size)
 {
-	int space = tty_buffer_request_room(tty, size);
+	int space;
+	unsigned long flags;
+	struct tty_buffer *tb;
+
+	spin_lock_irqsave(&tty->buf.lock, flags);
+	space = __tty_buffer_request_room(tty, size);
+
+	tb = tty->buf.tail;
 	if (likely(space)) {
-		struct tty_buffer *tb = tty->buf.tail;
 		*chars = tb->char_buf_ptr + tb->used;
 		memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
 		tb->used += space;
 	}
+	spin_unlock_irqrestore(&tty->buf.lock, flags);
 	return space;
 }
 EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
@@ -374,13 +412,20 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
 int tty_prepare_flip_string_flags(struct tty_struct *tty,
 			unsigned char **chars, char **flags, size_t size)
 {
-	int space = tty_buffer_request_room(tty, size);
+	int space;
+	unsigned long __flags;
+	struct tty_buffer *tb;
+
+	spin_lock_irqsave(&tty->buf.lock, __flags);
+	space = __tty_buffer_request_room(tty, size);
+
+	tb = tty->buf.tail;
 	if (likely(space)) {
-		struct tty_buffer *tb = tty->buf.tail;
 		*chars = tb->char_buf_ptr + tb->used;
 		*flags = tb->flag_buf_ptr + tb->used;
 		tb->used += space;
 	}
+	spin_unlock_irqrestore(&tty->buf.lock, __flags);
 	return space;
 }
 EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index d939bd705c71..9e930c009bf2 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -185,6 +185,7 @@ void free_tty_struct(struct tty_struct *tty)
 		put_device(tty->dev);
 	kfree(tty->write_buf);
 	tty_buffer_free_all(tty);
+	tty->magic = 0xDEADDEAD;
 	kfree(tty);
 }
 
@@ -573,7 +574,7 @@ void __tty_hangup(struct tty_struct *tty)
 	}
 	spin_unlock(&redirect_lock);
 
-	tty_lock();
+	tty_lock(tty);
 
 	/* some functions below drop BTM, so we need this bit */
 	set_bit(TTY_HUPPING, &tty->flags);
@@ -666,7 +667,7 @@ void __tty_hangup(struct tty_struct *tty)
 	clear_bit(TTY_HUPPING, &tty->flags);
 	tty_ldisc_enable(tty);
 
-	tty_unlock();
+	tty_unlock(tty);
 
 	if (f)
 		fput(f);
@@ -855,10 +856,11 @@ void disassociate_ctty(int on_exit)
  */
 void no_tty(void)
 {
+	/* FIXME: Review locking here. The tty_lock never covered any race
+	   between a new association and proc_clear_tty but possible we need
+	   to protect against this anyway */
 	struct task_struct *tsk = current;
-	tty_lock();
 	disassociate_ctty(0);
-	tty_unlock();
 	proc_clear_tty(tsk);
 }
 
@@ -1102,12 +1104,12 @@ void tty_write_message(struct tty_struct *tty, char *msg)
 {
 	if (tty) {
 		mutex_lock(&tty->atomic_write_lock);
-		tty_lock();
+		tty_lock(tty);
 		if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) {
-			tty_unlock();
+			tty_unlock(tty);
 			tty->ops->write(tty, msg, strlen(msg));
 		} else
-			tty_unlock();
+			tty_unlock(tty);
 		tty_write_unlock(tty);
 	}
 	return;
@@ -1402,6 +1404,7 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
 	}
 	initialize_tty_struct(tty, driver, idx);
 
+	tty_lock(tty);
 	retval = tty_driver_install_tty(driver, tty);
 	if (retval < 0)
 		goto err_deinit_tty;
@@ -1414,9 +1417,11 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
 	retval = tty_ldisc_setup(tty, tty->link);
 	if (retval)
 		goto err_release_tty;
+	/* Return the tty locked so that it cannot vanish under the caller */
 	return tty;
 
 err_deinit_tty:
+	tty_unlock(tty);
 	deinitialize_tty_struct(tty);
 	free_tty_struct(tty);
 err_module_put:
@@ -1425,6 +1430,7 @@ err_module_put:
 
 	/* call the tty release_tty routine to clean out this slot */
 err_release_tty:
+	tty_unlock(tty);
 	printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, "
 				 "clearing slot %d\n", idx);
 	release_tty(tty, idx);
@@ -1627,7 +1633,7 @@ int tty_release(struct inode *inode, struct file *filp)
 	if (tty_paranoia_check(tty, inode, __func__))
 		return 0;
 
-	tty_lock();
+	tty_lock(tty);
 	check_tty_count(tty, __func__);
 
 	__tty_fasync(-1, filp, 0);
@@ -1636,10 +1642,11 @@ int tty_release(struct inode *inode, struct file *filp)
 	pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
 		      tty->driver->subtype == PTY_TYPE_MASTER);
 	devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
+	/* Review: parallel close */
 	o_tty = tty->link;
 
 	if (tty_release_checks(tty, o_tty, idx)) {
-		tty_unlock();
+		tty_unlock(tty);
 		return 0;
 	}
 
@@ -1651,7 +1658,7 @@ int tty_release(struct inode *inode, struct file *filp)
 	if (tty->ops->close)
 		tty->ops->close(tty, filp);
 
-	tty_unlock();
+	tty_unlock(tty);
 	/*
 	 * Sanity check: if tty->count is going to zero, there shouldn't be
 	 * any waiters on tty->read_wait or tty->write_wait.  We test the
@@ -1674,7 +1681,7 @@ int tty_release(struct inode *inode, struct file *filp)
 		   opens on /dev/tty */
 
 		mutex_lock(&tty_mutex);
-		tty_lock();
+		tty_lock_pair(tty, o_tty);
 		tty_closing = tty->count <= 1;
 		o_tty_closing = o_tty &&
 			(o_tty->count <= (pty_master ? 1 : 0));
@@ -1705,7 +1712,7 @@ int tty_release(struct inode *inode, struct file *filp)
 
 		printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
 				__func__, tty_name(tty, buf));
-		tty_unlock();
+		tty_unlock_pair(tty, o_tty);
 		mutex_unlock(&tty_mutex);
 		schedule();
 	}
@@ -1768,7 +1775,7 @@ int tty_release(struct inode *inode, struct file *filp)
 
 	/* check whether both sides are closing ... */
 	if (!tty_closing || (o_tty && !o_tty_closing)) {
-		tty_unlock();
+		tty_unlock_pair(tty, o_tty);
 		return 0;
 	}
 
@@ -1781,14 +1788,16 @@ int tty_release(struct inode *inode, struct file *filp)
 	tty_ldisc_release(tty, o_tty);
 	/*
 	 * The release_tty function takes care of the details of clearing
-	 * the slots and preserving the termios structure.
+	 * the slots and preserving the termios structure. The tty_unlock_pair
+	 * should be safe as we keep a kref while the tty is locked (so the
+	 * unlock never unlocks a freed tty).
 	 */
 	release_tty(tty, idx);
+	tty_unlock_pair(tty, o_tty);
 
 	/* Make this pty number available for reallocation */
 	if (devpts)
 		devpts_kill_index(inode, idx);
-	tty_unlock();
 	return 0;
 }
 
@@ -1800,6 +1809,9 @@ int tty_release(struct inode *inode, struct file *filp)
  *
  *	We cannot return driver and index like for the other nodes because
  *	devpts will not work then. It expects inodes to be from devpts FS.
+ *
+ *	We need to move to returning a refcounted object from all the lookup
+ *	paths including this one.
  */
 static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp)
 {
@@ -1816,6 +1828,7 @@ static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp)
 	/* noctty = 1; */
 	tty_kref_put(tty);
 	/* FIXME: we put a reference and return a TTY! */
+	/* This is only safe because the caller holds tty_mutex */
 	return tty;
 }
 
@@ -1888,6 +1901,9 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
  *	Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev.
  *		 tty->count should protect the rest.
  *		 ->siglock protects ->signal/->sighand
+ *
+ *	Note: the tty_unlock/lock cases without a ref are only safe due to
+ *	tty_mutex
  */
 
 static int tty_open(struct inode *inode, struct file *filp)
@@ -1911,8 +1927,7 @@ retry_open:
 	retval = 0;
 
 	mutex_lock(&tty_mutex);
-	tty_lock();
-
+	/* This is protected by the tty_mutex */
 	tty = tty_open_current_tty(device, filp);
 	if (IS_ERR(tty)) {
 		retval = PTR_ERR(tty);
@@ -1933,17 +1948,19 @@ retry_open:
 	}
 
 	if (tty) {
+		tty_lock(tty);
 		retval = tty_reopen(tty);
-		if (retval)
+		if (retval < 0) {
+			tty_unlock(tty);
 			tty = ERR_PTR(retval);
-	} else
+		}
+	} else	/* Returns with the tty_lock held for now */
 		tty = tty_init_dev(driver, index);
 
 	mutex_unlock(&tty_mutex);
 	if (driver)
 		tty_driver_kref_put(driver);
 	if (IS_ERR(tty)) {
-		tty_unlock();
 		retval = PTR_ERR(tty);
 		goto err_file;
 	}
@@ -1972,7 +1989,7 @@ retry_open:
 		printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__,
 				retval, tty->name);
 #endif
-		tty_unlock(); /* need to call tty_release without BTM */
+		tty_unlock(tty); /* need to call tty_release without BTM */
 		tty_release(inode, filp);
 		if (retval != -ERESTARTSYS)
 			return retval;
@@ -1984,17 +2001,15 @@ retry_open:
 		/*
 		 * Need to reset f_op in case a hangup happened.
 		 */
-		tty_lock();
 		if (filp->f_op == &hung_up_tty_fops)
 			filp->f_op = &tty_fops;
-		tty_unlock();
 		goto retry_open;
 	}
-	tty_unlock();
+	tty_unlock(tty);
 
 
 	mutex_lock(&tty_mutex);
-	tty_lock();
+	tty_lock(tty);
 	spin_lock_irq(&current->sighand->siglock);
 	if (!noctty &&
 	    current->signal->leader &&
@@ -2002,11 +2017,10 @@ retry_open:
 	    tty->session == NULL)
 		__proc_set_tty(current, tty);
 	spin_unlock_irq(&current->sighand->siglock);
-	tty_unlock();
+	tty_unlock(tty);
 	mutex_unlock(&tty_mutex);
 	return 0;
 err_unlock:
-	tty_unlock();
 	mutex_unlock(&tty_mutex);
 	/* after locks to avoid deadlock */
 	if (!IS_ERR_OR_NULL(driver))
@@ -2089,10 +2103,13 @@ out:
 
 static int tty_fasync(int fd, struct file *filp, int on)
 {
+	struct tty_struct *tty = file_tty(filp);
 	int retval;
-	tty_lock();
+
+	tty_lock(tty);
 	retval = __tty_fasync(fd, filp, on);
-	tty_unlock();
+	tty_unlock(tty);
+
 	return retval;
 }
 
@@ -2929,6 +2946,7 @@ void initialize_tty_struct(struct tty_struct *tty,
 	tty->pgrp = NULL;
 	tty->overrun_time = jiffies;
 	tty_buffer_init(tty);
+	mutex_init(&tty->legacy_mutex);
 	mutex_init(&tty->termios_mutex);
 	mutex_init(&tty->ldisc_mutex);
 	init_waitqueue_head(&tty->write_wait);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 24b95db75d84..173a9000a6cb 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -28,7 +28,6 @@
 
 static DEFINE_SPINLOCK(tty_ldisc_lock);
 static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
-static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_idle);
 /* Line disc dispatch table */
 static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
 
@@ -65,7 +64,7 @@ static void put_ldisc(struct tty_ldisc *ld)
 		return;
 	}
 	local_irq_restore(flags);
-	wake_up(&tty_ldisc_idle);
+	wake_up(&ld->wq_idle);
 }
 
 /**
@@ -200,6 +199,8 @@ static struct tty_ldisc *tty_ldisc_get(int disc)
 
 	ld->ops = ldops;
 	atomic_set(&ld->users, 1);
+	init_waitqueue_head(&ld->wq_idle);
+
 	return ld;
 }
 
@@ -538,7 +539,7 @@ static void tty_ldisc_flush_works(struct tty_struct *tty)
 static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
 {
 	long ret;
-	ret = wait_event_timeout(tty_ldisc_idle,
+	ret = wait_event_timeout(tty->ldisc->wq_idle,
 			atomic_read(&tty->ldisc->users) == 1, timeout);
 	return ret > 0 ? 0 : -EBUSY;
 }
@@ -567,7 +568,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 	if (IS_ERR(new_ldisc))
 		return PTR_ERR(new_ldisc);
 
-	tty_lock();
+	tty_lock(tty);
 	/*
 	 *	We need to look at the tty locking here for pty/tty pairs
 	 *	when both sides try to change in parallel.
@@ -581,12 +582,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 	 */
 
 	if (tty->ldisc->ops->num == ldisc) {
-		tty_unlock();
+		tty_unlock(tty);
 		tty_ldisc_put(new_ldisc);
 		return 0;
 	}
 
-	tty_unlock();
+	tty_unlock(tty);
 	/*
 	 *	Problem: What do we do if this blocks ?
 	 *	We could deadlock here
@@ -594,7 +595,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	tty_wait_until_sent(tty, 0);
 
-	tty_lock();
+	tty_lock(tty);
 	mutex_lock(&tty->ldisc_mutex);
 
 	/*
@@ -604,10 +605,10 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) {
 		mutex_unlock(&tty->ldisc_mutex);
-		tty_unlock();
+		tty_unlock(tty);
 		wait_event(tty_ldisc_wait,
 			test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0);
-		tty_lock();
+		tty_lock(tty);
 		mutex_lock(&tty->ldisc_mutex);
 	}
 
@@ -622,7 +623,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	o_ldisc = tty->ldisc;
 
-	tty_unlock();
+	tty_unlock(tty);
 	/*
 	 *	Make sure we don't change while someone holds a
 	 *	reference to the line discipline. The TTY_LDISC bit
@@ -649,7 +650,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	retval = tty_ldisc_wait_idle(tty, 5 * HZ);
 
-	tty_lock();
+	tty_lock(tty);
 	mutex_lock(&tty->ldisc_mutex);
 
 	/* handle wait idle failure locked */
@@ -664,7 +665,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 		clear_bit(TTY_LDISC_CHANGING, &tty->flags);
 		mutex_unlock(&tty->ldisc_mutex);
 		tty_ldisc_put(new_ldisc);
-		tty_unlock();
+		tty_unlock(tty);
 		return -EIO;
 	}
 
@@ -707,7 +708,7 @@ enable:
 	if (o_work)
 		schedule_work(&o_tty->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
-	tty_unlock();
+	tty_unlock(tty);
 	return retval;
 }
 
@@ -815,11 +816,11 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	 * need to wait for another function taking the BTM
 	 */
 	clear_bit(TTY_LDISC, &tty->flags);
-	tty_unlock();
+	tty_unlock(tty);
 	cancel_work_sync(&tty->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
 retry:
-	tty_lock();
+	tty_lock(tty);
 	mutex_lock(&tty->ldisc_mutex);
 
 	/* At this point we have a closed ldisc and we want to
@@ -830,7 +831,7 @@ retry:
 		if (atomic_read(&tty->ldisc->users) != 1) {
 			char cur_n[TASK_COMM_LEN], tty_n[64];
 			long timeout = 3 * HZ;
-			tty_unlock();
+			tty_unlock(tty);
 
 			while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
 				timeout = MAX_SCHEDULE_TIMEOUT;
@@ -911,10 +912,10 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 	 * race with the set_ldisc code path.
 	 */
 
-	tty_unlock();
+	tty_unlock(tty);
 	tty_ldisc_halt(tty);
 	tty_ldisc_flush_works(tty);
-	tty_lock();
+	tty_lock(tty);
 
 	mutex_lock(&tty->ldisc_mutex);
 	/*
diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c
index 9ff986c32a21..69adc80c98cd 100644
--- a/drivers/tty/tty_mutex.c
+++ b/drivers/tty/tty_mutex.c
@@ -4,29 +4,59 @@
 #include <linux/semaphore.h>
 #include <linux/sched.h>
 
-/*
- * The 'big tty mutex'
- *
- * This mutex is taken and released by tty_lock() and tty_unlock(),
- * replacing the older big kernel lock.
- * It can no longer be taken recursively, and does not get
- * released implicitly while sleeping.
- *
- * Don't use in new code.
- */
-static DEFINE_MUTEX(big_tty_mutex);
+/* Legacy tty mutex glue */
 
 /*
  * Getting the big tty mutex.
  */
-void __lockfunc tty_lock(void)
+
+void __lockfunc tty_lock(struct tty_struct *tty)
 {
-	mutex_lock(&big_tty_mutex);
+	if (tty->magic != TTY_MAGIC) {
+		printk(KERN_ERR "L Bad %p\n", tty);
+		WARN_ON(1);
+		return;
+	}
+	tty_kref_get(tty);
+	mutex_lock(&tty->legacy_mutex);
 }
 EXPORT_SYMBOL(tty_lock);
 
-void __lockfunc tty_unlock(void)
+void __lockfunc tty_unlock(struct tty_struct *tty)
 {
-	mutex_unlock(&big_tty_mutex);
+	if (tty->magic != TTY_MAGIC) {
+		printk(KERN_ERR "U Bad %p\n", tty);
+		WARN_ON(1);
+		return;
+	}
+	mutex_unlock(&tty->legacy_mutex);
+	tty_kref_put(tty);
 }
 EXPORT_SYMBOL(tty_unlock);
+
+/*
+ * Getting the big tty mutex for a pair of ttys with lock ordering
+ * On a non pty/tty pair tty2 can be NULL which is just fine.
+ */
+void __lockfunc tty_lock_pair(struct tty_struct *tty,
+					struct tty_struct *tty2)
+{
+	if (tty < tty2) {
+		tty_lock(tty);
+		tty_lock(tty2);
+	} else {
+		if (tty2 && tty2 != tty)
+			tty_lock(tty2);
+		tty_lock(tty);
+	}
+}
+EXPORT_SYMBOL(tty_lock_pair);
+
+void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+						struct tty_struct *tty2)
+{
+	tty_unlock(tty);
+	if (tty2 && tty2 != tty)
+		tty_unlock(tty2);
+}
+EXPORT_SYMBOL(tty_unlock_pair);
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index bf6e238146ae..d9cca95a5452 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -230,7 +230,7 @@ int tty_port_block_til_ready(struct tty_port *port,
 
 	/* block if port is in the process of being closed */
 	if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
-		wait_event_interruptible_tty(port->close_wait,
+		wait_event_interruptible_tty(tty, port->close_wait,
 				!(port->flags & ASYNC_CLOSING));
 		if (port->flags & ASYNC_HUP_NOTIFY)
 			return -EAGAIN;
@@ -296,9 +296,9 @@ int tty_port_block_til_ready(struct tty_port *port,
 			retval = -ERESTARTSYS;
 			break;
 		}
-		tty_unlock();
+		tty_unlock(tty);
 		schedule();
-		tty_lock();
+		tty_lock(tty);
 	}
 	finish_wait(&port->open_wait, &wait);
 
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 8308fc7cdc26..2aaa0c228409 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/tty.h>
 #include <asm/uaccess.h>
+#include <linux/console.h>
 #include <linux/consolemap.h>
 #include <linux/vt_kern.h>
 
@@ -312,6 +313,7 @@ int con_set_trans_old(unsigned char __user * arg)
 	if (!access_ok(VERIFY_READ, arg, E_TABSZ))
 		return -EFAULT;
 
+	console_lock();
 	for (i=0; i<E_TABSZ ; i++) {
 		unsigned char uc;
 		__get_user(uc, arg+i);
@@ -319,6 +321,7 @@ int con_set_trans_old(unsigned char __user * arg)
 	}
 
 	update_user_maps();
+	console_unlock();
 	return 0;
 }
 
@@ -330,11 +333,13 @@ int con_get_trans_old(unsigned char __user * arg)
 	if (!access_ok(VERIFY_WRITE, arg, E_TABSZ))
 		return -EFAULT;
 
+	console_lock();
 	for (i=0; i<E_TABSZ ; i++)
-	  {
-	    ch = conv_uni_to_pc(vc_cons[fg_console].d, p[i]);
-	    __put_user((ch & ~0xff) ? 0 : ch, arg+i);
-	  }
+	{
+		ch = conv_uni_to_pc(vc_cons[fg_console].d, p[i]);
+		__put_user((ch & ~0xff) ? 0 : ch, arg+i);
+	}
+	console_unlock();
 	return 0;
 }
 
@@ -346,6 +351,7 @@ int con_set_trans_new(ushort __user * arg)
 	if (!access_ok(VERIFY_READ, arg, E_TABSZ*sizeof(unsigned short)))
 		return -EFAULT;
 
+	console_lock();
 	for (i=0; i<E_TABSZ ; i++) {
 		unsigned short us;
 		__get_user(us, arg+i);
@@ -353,6 +359,7 @@ int con_set_trans_new(ushort __user * arg)
 	}
 
 	update_user_maps();
+	console_unlock();
 	return 0;
 }
 
@@ -364,8 +371,10 @@ int con_get_trans_new(ushort __user * arg)
 	if (!access_ok(VERIFY_WRITE, arg, E_TABSZ*sizeof(unsigned short)))
 		return -EFAULT;
 
+	console_lock();
 	for (i=0; i<E_TABSZ ; i++)
 	  __put_user(p[i], arg+i);
+	console_unlock();
 	
 	return 0;
 }
@@ -407,6 +416,7 @@ static void con_release_unimap(struct uni_pagedir *p)
 	}
 }
 
+/* Caller must hold the console lock */
 void con_free_unimap(struct vc_data *vc)
 {
 	struct uni_pagedir *p;
@@ -487,17 +497,21 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos)
 	return 0;
 }
 
-/* ui is a leftover from using a hashtable, but might be used again */
-int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
+/* ui is a leftover from using a hashtable, but might be used again
+   Caller must hold the lock */
+static int con_do_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
 {
 	struct uni_pagedir *p, *q;
-  
+
 	p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
-	if (p && p->readonly) return -EIO;
+	if (p && p->readonly)
+		return -EIO;
+
 	if (!p || --p->refcount) {
 		q = kzalloc(sizeof(*p), GFP_KERNEL);
 		if (!q) {
-			if (p) p->refcount++;
+			if (p)
+				p->refcount++;
 			return -ENOMEM;
 		}
 		q->refcount=1;
@@ -511,23 +525,43 @@ int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
 	return 0;
 }
 
+int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
+{
+	int ret;
+	console_lock();
+	ret = con_do_clear_unimap(vc, ui);
+	console_unlock();
+	return ret;
+}
+	
 int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 {
 	int err = 0, err1, i;
 	struct uni_pagedir *p, *q;
 
+	console_lock();
+
 	/* Save original vc_unipagdir_loc in case we allocate a new one */
 	p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
-	if (p->readonly) return -EIO;
+	if (p->readonly) {
+		console_unlock();
+		return -EIO;
+	}
 	
-	if (!ct) return 0;
+	if (!ct) {
+		console_unlock();
+		return 0;
+	}
 	
 	if (p->refcount > 1) {
 		int j, k;
 		u16 **p1, *p2, l;
 		
-		err1 = con_clear_unimap(vc, NULL);
-		if (err1) return err1;
+		err1 = con_do_clear_unimap(vc, NULL);
+		if (err1) {
+			console_unlock();
+			return err1;
+		}
 		
 		/*
 		 * Since refcount was > 1, con_clear_unimap() allocated a
@@ -558,7 +592,8 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 						*vc->vc_uni_pagedir_loc = (unsigned long)p;
 						con_release_unimap(q);
 						kfree(q);
-						return err1;
+						console_unlock();
+						return err1; 
 					}
 				}
 			} else {
@@ -592,21 +627,30 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
 	/*
 	 * Merge with fontmaps of any other virtual consoles.
 	 */
-	if (con_unify_unimap(vc, p))
+	if (con_unify_unimap(vc, p)) {
+		console_unlock();
 		return err;
+	}
 
 	for (i = 0; i <= 3; i++)
 		set_inverse_transl(vc, p, i); /* Update inverse translations */
 	set_inverse_trans_unicode(vc, p);
-  
+
+	console_unlock();
 	return err;
 }
 
-/* Loads the unimap for the hardware font, as defined in uni_hash.tbl.
-   The representation used was the most compact I could come up
-   with.  This routine is executed at sys_setup time, and when the
-   PIO_FONTRESET ioctl is called. */
-
+/**
+ *	con_set_default_unimap	-	set default unicode map
+ *	@vc: the console we are updating
+ *
+ *	Loads the unimap for the hardware font, as defined in uni_hash.tbl.
+ *	The representation used was the most compact I could come up
+ *	with.  This routine is executed at video setup, and when the
+ *	PIO_FONTRESET ioctl is called. 
+ *
+ *	The caller must hold the console lock
+ */
 int con_set_default_unimap(struct vc_data *vc)
 {
 	int i, j, err = 0, err1;
@@ -617,6 +661,7 @@ int con_set_default_unimap(struct vc_data *vc)
 		p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
 		if (p == dflt)
 			return 0;
+
 		dflt->refcount++;
 		*vc->vc_uni_pagedir_loc = (unsigned long)dflt;
 		if (p && !--p->refcount) {
@@ -628,8 +673,9 @@ int con_set_default_unimap(struct vc_data *vc)
 	
 	/* The default font is always 256 characters */
 
-	err = con_clear_unimap(vc, NULL);
-	if (err) return err;
+	err = con_do_clear_unimap(vc, NULL);
+	if (err)
+		return err;
     
 	p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
 	q = dfont_unitable;
@@ -654,6 +700,13 @@ int con_set_default_unimap(struct vc_data *vc)
 }
 EXPORT_SYMBOL(con_set_default_unimap);
 
+/**
+ *	con_copy_unimap		-	copy unimap between two vts
+ *	@dst_vc: target
+ *	@src_vt: source
+ *
+ *	The caller must hold the console lock when invoking this method
+ */
 int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
 {
 	struct uni_pagedir *q;
@@ -668,13 +721,23 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
 	*dst_vc->vc_uni_pagedir_loc = (long)q;
 	return 0;
 }
+EXPORT_SYMBOL(con_copy_unimap);
 
+/**
+ *	con_get_unimap		-	get the unicode map
+ *	@vc: the console to read from
+ *
+ *	Read the console unicode data for this console. Called from the ioctl
+ *	handlers.
+ */
 int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list)
 {
 	int i, j, k, ect;
 	u16 **p1, *p2;
 	struct uni_pagedir *p;
 
+	console_lock();
+
 	ect = 0;
 	if (*vc->vc_uni_pagedir_loc) {
 		p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
@@ -694,22 +757,19 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni
 				}
 	}
 	__put_user(ect, uct);
+	console_unlock();
 	return ((ect <= ct) ? 0 : -ENOMEM);
 }
 
-void con_protect_unimap(struct vc_data *vc, int rdonly)
-{
-	struct uni_pagedir *p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
-	
-	if (p)
-		p->readonly = rdonly;
-}
-
 /*
  * Always use USER_MAP. These functions are used by the keyboard,
  * which shouldn't be affected by G0/G1 switching, etc.
  * If the user map still contains default values, i.e. the
  * direct-to-font mapping, then assume user is using Latin1.
+ *
+ * FIXME: at some point we need to decide if we want to lock the table
+ * update element itself via the keyboard_event_lock for consistency with the
+ * keyboard driver as well as the consoles
  */
 /* may be called during an interrupt */
 u32 conv_8bit_to_uni(unsigned char c)
@@ -777,4 +837,3 @@ console_map_init(void)
 			con_set_default_unimap(vc_cons[i].d);
 }
 
-EXPORT_SYMBOL(con_copy_unimap);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 2156188db4a6..84cbf298c094 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3892,36 +3892,6 @@ static void set_palette(struct vc_data *vc)
 		vc->vc_sw->con_set_palette(vc, color_table);
 }
 
-static int set_get_cmap(unsigned char __user *arg, int set)
-{
-    int i, j, k;
-
-    WARN_CONSOLE_UNLOCKED();
-
-    for (i = 0; i < 16; i++)
-	if (set) {
-	    get_user(default_red[i], arg++);
-	    get_user(default_grn[i], arg++);
-	    get_user(default_blu[i], arg++);
-	} else {
-	    put_user(default_red[i], arg++);
-	    put_user(default_grn[i], arg++);
-	    put_user(default_blu[i], arg++);
-	}
-    if (set) {
-	for (i = 0; i < MAX_NR_CONSOLES; i++)
-	    if (vc_cons_allocated(i)) {
-		for (j = k = 0; j < 16; j++) {
-		    vc_cons[i].d->vc_palette[k++] = default_red[j];
-		    vc_cons[i].d->vc_palette[k++] = default_grn[j];
-		    vc_cons[i].d->vc_palette[k++] = default_blu[j];
-		}
-		set_palette(vc_cons[i].d);
-	    }
-    }
-    return 0;
-}
-
 /*
  * Load palette into the DAC registers. arg points to a colour
  * map, 3 bytes per colour, 16 colours, range from 0 to 255.
@@ -3929,24 +3899,50 @@ static int set_get_cmap(unsigned char __user *arg, int set)
 
 int con_set_cmap(unsigned char __user *arg)
 {
-	int rc;
+	int i, j, k;
+	unsigned char colormap[3*16];
+
+	if (copy_from_user(colormap, arg, sizeof(colormap)))
+		return -EFAULT;
 
 	console_lock();
-	rc = set_get_cmap (arg,1);
+	for (i = k = 0; i < 16; i++) {
+		default_red[i] = colormap[k++];
+		default_grn[i] = colormap[k++];
+		default_blu[i] = colormap[k++];
+	}
+	for (i = 0; i < MAX_NR_CONSOLES; i++) {
+		if (!vc_cons_allocated(i))
+			continue;
+		for (j = k = 0; j < 16; j++) {
+			vc_cons[i].d->vc_palette[k++] = default_red[j];
+			vc_cons[i].d->vc_palette[k++] = default_grn[j];
+			vc_cons[i].d->vc_palette[k++] = default_blu[j];
+		}
+		set_palette(vc_cons[i].d);
+	}
 	console_unlock();
 
-	return rc;
+	return 0;
 }
 
 int con_get_cmap(unsigned char __user *arg)
 {
-	int rc;
+	int i, k;
+	unsigned char colormap[3*16];
 
 	console_lock();
-	rc = set_get_cmap (arg,0);
+	for (i = k = 0; i < 16; i++) {
+		colormap[k++] = default_red[i];
+		colormap[k++] = default_grn[i];
+		colormap[k++] = default_blu[i];
+	}
 	console_unlock();
 
-	return rc;
+	if (copy_to_user(arg, colormap, sizeof(colormap)))
+		return -EFAULT;
+
+	return 0;
 }
 
 void reset_palette(struct vc_data *vc)
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index ede2ef18d2fb..64618547be11 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -910,7 +910,9 @@ int vt_ioctl(struct tty_struct *tty,
 		ret = con_font_op(vc_cons[fg_console].d, &op);
 		if (ret)
 			break;
+		console_lock();
 		con_set_default_unimap(vc_cons[fg_console].d);
+		console_unlock();
 		break;
 		}
 #endif
@@ -934,33 +936,23 @@ int vt_ioctl(struct tty_struct *tty,
 	case PIO_SCRNMAP:
 		if (!perm)
 			ret = -EPERM;
-		else {
-			tty_lock();
+		else
 			ret = con_set_trans_old(up);
-			tty_unlock();
-		}
 		break;
 
 	case GIO_SCRNMAP:
-		tty_lock();
 		ret = con_get_trans_old(up);
-		tty_unlock();
 		break;
 
 	case PIO_UNISCRNMAP:
 		if (!perm)
 			ret = -EPERM;
-		else {
-			tty_lock();
+		else
 			ret = con_set_trans_new(up);
-			tty_unlock();
-		}
 		break;
 
 	case GIO_UNISCRNMAP:
-		tty_lock();
 		ret = con_get_trans_new(up);
-		tty_unlock();
 		break;
 
 	case PIO_UNIMAPCLR:
@@ -970,19 +962,14 @@ int vt_ioctl(struct tty_struct *tty,
 		ret = copy_from_user(&ui, up, sizeof(struct unimapinit));
 		if (ret)
 			ret = -EFAULT;
-		else {
-			tty_lock();
+		else
 			con_clear_unimap(vc, &ui);
-			tty_unlock();
-		}
 		break;
 	      }
 
 	case PIO_UNIMAP:
 	case GIO_UNIMAP:
-		tty_lock();
 		ret = do_unimap_ioctl(cmd, up, perm, vc);
-		tty_unlock();
 		break;
 
 	case VT_LOCKSWITCH:
@@ -1196,9 +1183,7 @@ long vt_compat_ioctl(struct tty_struct *tty,
 
 	case PIO_UNIMAP:
 	case GIO_UNIMAP:
-		tty_lock();
 		ret = compat_unimap_ioctl(cmd, up, perm, vc);
-		tty_unlock();
 		break;
 
 	/*
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index b98371d93a92..42202cd83158 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -146,6 +146,14 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 	priv->flags = 0; /* interrupt is enabled to begin with */
 	priv->pdev = pdev;
 
+	if (!uioinfo->irq) {
+		ret = platform_get_irq(pdev, 0);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to get IRQ\n");
+			goto bad0;
+		}
+		uioinfo->irq = ret;
+	}
 	uiomem = &uioinfo->mem[0];
 
 	for (i = 0; i < pdev->num_resources; ++i) {
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 76316a33061b..a7773a3e02b1 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -133,6 +133,8 @@ source "drivers/usb/host/Kconfig"
 
 source "drivers/usb/musb/Kconfig"
 
+source "drivers/usb/chipidea/Kconfig"
+
 source "drivers/usb/renesas_usbhs/Kconfig"
 
 source "drivers/usb/class/Kconfig"
@@ -177,6 +179,8 @@ source "drivers/usb/serial/Kconfig"
 
 source "drivers/usb/misc/Kconfig"
 
+source "drivers/usb/phy/Kconfig"
+
 source "drivers/usb/atm/Kconfig"
 
 source "drivers/usb/gadget/Kconfig"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 53a7bc07dd8d..c691eea51537 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -46,12 +46,14 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
+obj-$(CONFIG_USB)		+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
 obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
 
 obj-$(CONFIG_USB_MUSB_HDRC)	+= musb/
+obj-$(CONFIG_USB_CHIPIDEA)	+= chipidea/
 obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs/
 obj-$(CONFIG_USB_GADGET)	+= gadget/
 
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 98b89fe19867..b7eb86ad6bf2 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -674,7 +674,7 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
 	}
 
 	ret = offd;
-	dbg("cm %#x", cm);
+	usb_dbg(instance->usbatm, "cm %#x\n", cm);
 fail:
 	mutex_unlock(&instance->cm_serialize);
 err:
@@ -733,7 +733,7 @@ static int cxacru_card_status(struct cxacru_data *instance)
 {
 	int ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
 	if (ret < 0) {		/* firmware not loaded */
-		dbg("cxacru_adsl_start: CARD_GET_STATUS returned %d", ret);
+		usb_dbg(instance->usbatm, "cxacru_adsl_start: CARD_GET_STATUS returned %d\n", ret);
 		return ret;
 	}
 	return 0;
@@ -758,7 +758,7 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
 	int ret;
 	int start_polling = 1;
 
-	dbg("cxacru_atm_start");
+	dev_dbg(&intf->dev, "%s\n", __func__);
 
 	/* Read MAC address */
 	ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0,
@@ -962,13 +962,13 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
 			ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
 					   buf, offb, NULL, CMD_TIMEOUT);
 			if (ret < 0) {
-				dbg("sending fw %#x failed", fw);
+				dev_dbg(&usb_dev->dev, "sending fw %#x failed\n", fw);
 				goto cleanup;
 			}
 			offb = 0;
 		}
 	} while (offd < size);
-	dbg("sent fw %#x", fw);
+	dev_dbg(&usb_dev->dev, "sent fw %#x\n", fw);
 
 	ret = 0;
 
@@ -988,7 +988,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance,
 			       usb_dev->descriptor.idProduct };
 	__le32 val;
 
-	dbg("cxacru_upload_firmware");
+	usb_dbg(usbatm, "%s\n", __func__);
 
 	/* FirmwarePllFClkValue */
 	val = cpu_to_le32(instance->modem_type->pll_f_clk);
@@ -1074,7 +1074,7 @@ static int cxacru_find_firmware(struct cxacru_data *instance,
 	char buf[16];
 
 	sprintf(buf, "cxacru-%s.bin", phase);
-	dbg("cxacru_find_firmware: looking for %s", buf);
+	usb_dbg(usbatm, "cxacru_find_firmware: looking for %s\n", buf);
 
 	if (request_firmware(fw_p, buf, dev)) {
 		usb_dbg(usbatm, "no stage %s firmware found\n", phase);
@@ -1115,9 +1115,9 @@ static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
 
 	ret = cxacru_card_status(instance);
 	if (ret)
-		dbg("modem initialisation failed");
+		usb_dbg(usbatm_instance, "modem initialisation failed\n");
 	else
-		dbg("done setting up the modem");
+		usb_dbg(usbatm_instance, "done setting up the modem\n");
 
 	return ret;
 }
@@ -1133,7 +1133,7 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 	/* instance init */
 	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
 	if (!instance) {
-		dbg("cxacru_bind: no memory for instance data");
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for instance data\n");
 		return -ENOMEM;
 	}
 
@@ -1149,31 +1149,31 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 
 	instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL);
 	if (!instance->rcv_buf) {
-		dbg("cxacru_bind: no memory for rcv_buf");
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_buf\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
 	instance->snd_buf = (u8 *) __get_free_page(GFP_KERNEL);
 	if (!instance->snd_buf) {
-		dbg("cxacru_bind: no memory for snd_buf");
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_buf\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
 	instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!instance->rcv_urb) {
-		dbg("cxacru_bind: no memory for rcv_urb");
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_urb\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
 	instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!instance->snd_urb) {
-		dbg("cxacru_bind: no memory for snd_urb");
+		usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_urb\n");
 		ret = -ENOMEM;
 		goto fail;
 	}
 
 	if (!cmd_ep) {
-		dbg("cxacru_bind: no command endpoint");
+		usb_dbg(usbatm_instance, "cxacru_bind: no command endpoint\n");
 		ret = -ENODEV;
 		goto fail;
 	}
@@ -1227,10 +1227,10 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
 	struct cxacru_data *instance = usbatm_instance->driver_data;
 	int is_polling = 1;
 
-	dbg("cxacru_unbind entered");
+	usb_dbg(usbatm_instance, "cxacru_unbind entered\n");
 
 	if (!instance) {
-		dbg("cxacru_unbind: NULL instance!");
+		usb_dbg(usbatm_instance, "cxacru_unbind: NULL instance!\n");
 		return;
 	}
 
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 98dd9e49b684..975e9c6691d6 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -170,7 +170,7 @@ static void speedtch_set_swbuff(struct speedtch_instance_data *instance, int sta
 			 "%sabling SW buffering: usb_control_msg returned %d\n",
 			 state ? "En" : "Dis", ret);
 	else
-		dbg("speedtch_set_swbuff: %sbled SW buffering", state ? "En" : "Dis");
+		usb_dbg(usbatm, "speedtch_set_swbuff: %sbled SW buffering\n", state ? "En" : "Dis");
 }
 
 static void speedtch_test_sequence(struct speedtch_instance_data *instance)
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 01ea5d7421d4..d7e422dc0ef7 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1357,10 +1357,8 @@ static int uea_stat_e1(struct uea_softc *sc)
 		/* release the dsp firmware as it is not needed until
 		 * the next failure
 		 */
-		if (sc->dsp_firm) {
-			release_firmware(sc->dsp_firm);
-			sc->dsp_firm = NULL;
-		}
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
 	}
 
 	/* always update it as atm layer could not be init when we switch to
@@ -1496,10 +1494,8 @@ static int uea_stat_e4(struct uea_softc *sc)
 		/* release the dsp firmware as it is not needed until
 		 * the next failure
 		 */
-		if (sc->dsp_firm) {
-			release_firmware(sc->dsp_firm);
-			sc->dsp_firm = NULL;
-		}
+		release_firmware(sc->dsp_firm);
+		sc->dsp_firm = NULL;
 	}
 
 	/* always update it as atm layer could not be init when we switch to
@@ -2240,8 +2236,7 @@ static void uea_stop(struct uea_softc *sc)
 	/* flush the work item, when no one can schedule it */
 	flush_work_sync(&sc->task);
 
-	if (sc->dsp_firm)
-		release_firmware(sc->dsp_firm);
+	release_firmware(sc->dsp_firm);
 	uea_leaves(INS_TO_USBDEV(sc));
 }
 
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index d3448ca110ce..ee62b3576f94 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -86,7 +86,7 @@
 #ifdef VERBOSE_DEBUG
 static int usbatm_print_packet(const unsigned char *data, int len);
 #define PACKETDEBUG(arg...)	usbatm_print_packet(arg)
-#define vdbg(arg...)		dbg(arg)
+#define vdbg(arg...)		dev_dbg(arg)
 #else
 #define PACKETDEBUG(arg...)
 #define vdbg(arg...)
@@ -714,7 +714,7 @@ static void usbatm_destroy_instance(struct kref *kref)
 {
 	struct usbatm_data *instance = container_of(kref, struct usbatm_data, refcount);
 
-	dbg("%s", __func__);
+	usb_dbg(instance, "%s\n", __func__);
 
 	tasklet_kill(&instance->rx_channel.tasklet);
 	tasklet_kill(&instance->tx_channel.tasklet);
@@ -724,14 +724,14 @@ static void usbatm_destroy_instance(struct kref *kref)
 
 static void usbatm_get_instance(struct usbatm_data *instance)
 {
-	dbg("%s", __func__);
+	usb_dbg(instance, "%s\n", __func__);
 
 	kref_get(&instance->refcount);
 }
 
 static void usbatm_put_instance(struct usbatm_data *instance)
 {
-	dbg("%s", __func__);
+	usb_dbg(instance, "%s\n", __func__);
 
 	kref_put(&instance->refcount, usbatm_destroy_instance);
 }
@@ -745,11 +745,10 @@ static void usbatm_atm_dev_close(struct atm_dev *atm_dev)
 {
 	struct usbatm_data *instance = atm_dev->dev_data;
 
-	dbg("%s", __func__);
-
 	if (!instance)
 		return;
 
+	usb_dbg(instance, "%s\n", __func__);
 	atm_dev->dev_data = NULL; /* catch bugs */
 	usbatm_put_instance(instance);	/* taken in usbatm_atm_init */
 }
@@ -759,10 +758,8 @@ static int usbatm_atm_proc_read(struct atm_dev *atm_dev, loff_t * pos, char *pag
 	struct usbatm_data *instance = atm_dev->dev_data;
 	int left = *pos;
 
-	if (!instance) {
-		dbg("%s: NULL instance!", __func__);
+	if (!instance)
 		return -ENODEV;
-	}
 
 	if (!left--)
 		return sprintf(page, "%s\n", instance->description);
@@ -804,10 +801,8 @@ static int usbatm_atm_open(struct atm_vcc *vcc)
 	int vci = vcc->vci;
 	short vpi = vcc->vpi;
 
-	if (!instance) {
-		dbg("%s: NULL data!", __func__);
+	if (!instance)
 		return -ENODEV;
-	}
 
 	atm_dbg(instance, "%s: vpi %hd, vci %d\n", __func__, vpi, vci);
 
@@ -884,10 +879,8 @@ static void usbatm_atm_close(struct atm_vcc *vcc)
 	struct usbatm_data *instance = vcc->dev->dev_data;
 	struct usbatm_vcc_data *vcc_data = vcc->dev_data;
 
-	if (!instance || !vcc_data) {
-		dbg("%s: NULL data!", __func__);
+	if (!instance || !vcc_data)
 		return;
-	}
 
 	atm_dbg(instance, "%s entered\n", __func__);
 
@@ -929,10 +922,8 @@ static int usbatm_atm_ioctl(struct atm_dev *atm_dev, unsigned int cmd,
 {
 	struct usbatm_data *instance = atm_dev->dev_data;
 
-	if (!instance || instance->disconnected) {
-		dbg("%s: %s!", __func__, instance ? "disconnected" : "NULL instance");
+	if (!instance || instance->disconnected)
 		return -ENODEV;
-	}
 
 	switch (cmd) {
 	case ATM_QUERYLOOP:
@@ -1336,8 +1327,6 @@ EXPORT_SYMBOL_GPL(usbatm_usb_disconnect);
 
 static int __init usbatm_usb_init(void)
 {
-	dbg("%s: driver version %s", __func__, DRIVER_VERSION);
-
 	if (sizeof(struct usbatm_control) > FIELD_SIZEOF(struct sk_buff, cb)) {
 		printk(KERN_ERR "%s unusable with this kernel!\n", usbatm_driver_name);
 		return -EIO;
@@ -1357,7 +1346,6 @@ module_init(usbatm_usb_init);
 
 static void __exit usbatm_usb_exit(void)
 {
-	dbg("%s", __func__);
 }
 module_exit(usbatm_usb_exit);
 
diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c
index 48ee0c5ff282..14ec9f0c5924 100644
--- a/drivers/usb/atm/xusbatm.c
+++ b/drivers/usb/atm/xusbatm.c
@@ -187,8 +187,6 @@ static int __init xusbatm_init(void)
 {
 	int i;
 
-	dbg("xusbatm_init");
-
 	if (!num_vendor ||
 	    num_vendor != num_product ||
 	    num_vendor != num_rx_endpoint ||
@@ -221,8 +219,6 @@ module_init(xusbatm_init);
 
 static void __exit xusbatm_exit(void)
 {
-	dbg("xusbatm_exit entered");
-
 	usb_deregister(&xusbatm_usb_driver);
 }
 module_exit(xusbatm_exit);
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
new file mode 100644
index 000000000000..fd36dc8b889b
--- /dev/null
+++ b/drivers/usb/chipidea/Kconfig
@@ -0,0 +1,32 @@
+config USB_CHIPIDEA
+	tristate "ChipIdea Highspeed Dual Role Controller"
+	depends on USB
+	help
+          Say Y here if your system has a dual role high speed USB
+          controller based on ChipIdea silicon IP. Currently, only the
+	  peripheral mode is supported.
+
+	  When compiled dynamically, the module will be called ci-hdrc.ko.
+
+if USB_CHIPIDEA
+
+config USB_CHIPIDEA_UDC
+	bool "ChipIdea device controller"
+	depends on USB_GADGET
+	select USB_GADGET_DUALSPEED
+	help
+	  Say Y here to enable device controller functionality of the
+	  ChipIdea driver.
+
+config USB_CHIPIDEA_HOST
+	bool "ChipIdea host controller"
+	help
+	  Say Y here to enable host controller functionality of the
+	  ChipIdea driver.
+
+config USB_CHIPIDEA_DEBUG
+	bool "ChipIdea driver debug"
+	help
+	  Say Y here to enable debugging output of the ChipIdea driver.
+
+endif
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
new file mode 100644
index 000000000000..cc3493769724
--- /dev/null
+++ b/drivers/usb/chipidea/Makefile
@@ -0,0 +1,14 @@
+obj-$(CONFIG_USB_CHIPIDEA)		+= ci_hdrc.o
+
+ci_hdrc-y				:= core.o
+ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC)	+= udc.o
+ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST)	+= host.o
+ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG)	+= debug.o
+
+ifneq ($(CONFIG_PCI),)
+	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_pci.o
+endif
+
+ifneq ($(CONFIG_ARCH_MSM),)
+	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_msm.o
+endif
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
new file mode 100644
index 000000000000..050de8562a04
--- /dev/null
+++ b/drivers/usb/chipidea/bits.h
@@ -0,0 +1,90 @@
+/*
+ * bits.h - register bits of the ChipIdea USB IP core
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVERS_USB_CHIPIDEA_BITS_H
+#define __DRIVERS_USB_CHIPIDEA_BITS_H
+
+#include <linux/usb/ehci_def.h>
+
+/* HCCPARAMS */
+#define HCCPARAMS_LEN         BIT(17)
+
+/* DCCPARAMS */
+#define DCCPARAMS_DEN         (0x1F << 0)
+#define DCCPARAMS_DC          BIT(7)
+#define DCCPARAMS_HC          BIT(8)
+
+/* TESTMODE */
+#define TESTMODE_FORCE        BIT(0)
+
+/* USBCMD */
+#define USBCMD_RS             BIT(0)
+#define USBCMD_RST            BIT(1)
+#define USBCMD_SUTW           BIT(13)
+#define USBCMD_ATDTW          BIT(14)
+
+/* USBSTS & USBINTR */
+#define USBi_UI               BIT(0)
+#define USBi_UEI              BIT(1)
+#define USBi_PCI              BIT(2)
+#define USBi_URI              BIT(6)
+#define USBi_SLI              BIT(8)
+
+/* DEVICEADDR */
+#define DEVICEADDR_USBADRA    BIT(24)
+#define DEVICEADDR_USBADR     (0x7FUL << 25)
+
+/* PORTSC */
+#define PORTSC_FPR            BIT(6)
+#define PORTSC_SUSP           BIT(7)
+#define PORTSC_HSP            BIT(9)
+#define PORTSC_PTC            (0x0FUL << 16)
+
+/* DEVLC */
+#define DEVLC_PSPD            (0x03UL << 25)
+#define    DEVLC_PSPD_HS      (0x02UL << 25)
+
+/* OTGSC */
+#define OTGSC_IDPU	      BIT(5)
+#define OTGSC_ID	      BIT(8)
+#define OTGSC_AVV	      BIT(9)
+#define OTGSC_ASV	      BIT(10)
+#define OTGSC_BSV	      BIT(11)
+#define OTGSC_BSE	      BIT(12)
+#define OTGSC_IDIS	      BIT(16)
+#define OTGSC_AVVIS	      BIT(17)
+#define OTGSC_ASVIS	      BIT(18)
+#define OTGSC_BSVIS	      BIT(19)
+#define OTGSC_BSEIS	      BIT(20)
+#define OTGSC_IDIE	      BIT(24)
+#define OTGSC_AVVIE	      BIT(25)
+#define OTGSC_ASVIE	      BIT(26)
+#define OTGSC_BSVIE	      BIT(27)
+#define OTGSC_BSEIE	      BIT(28)
+
+/* USBMODE */
+#define USBMODE_CM            (0x03UL <<  0)
+#define USBMODE_CM_DC         (0x02UL <<  0)
+#define USBMODE_SLOM          BIT(3)
+#define USBMODE_CI_SDIS       BIT(4)
+
+/* ENDPTCTRL */
+#define ENDPTCTRL_RXS         BIT(0)
+#define ENDPTCTRL_RXT         (0x03UL <<  2)
+#define ENDPTCTRL_RXR         BIT(6)         /* reserved for port 0 */
+#define ENDPTCTRL_RXE         BIT(7)
+#define ENDPTCTRL_TXS         BIT(16)
+#define ENDPTCTRL_TXT         (0x03UL << 18)
+#define ENDPTCTRL_TXR         BIT(22)        /* reserved for port 0 */
+#define ENDPTCTRL_TXE         BIT(23)
+
+#endif /* __DRIVERS_USB_CHIPIDEA_BITS_H */
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
new file mode 100644
index 000000000000..50911f8490d4
--- /dev/null
+++ b/drivers/usb/chipidea/ci.h
@@ -0,0 +1,313 @@
+/*
+ * ci.h - common structures, functions, and macros of the ChipIdea driver
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVERS_USB_CHIPIDEA_CI_H
+#define __DRIVERS_USB_CHIPIDEA_CI_H
+
+#include <linux/list.h>
+#include <linux/irqreturn.h>
+#include <linux/usb.h>
+#include <linux/usb/gadget.h>
+
+/******************************************************************************
+ * DEFINE
+ *****************************************************************************/
+#define CI13XXX_PAGE_SIZE  4096ul /* page size for TD's */
+#define ENDPT_MAX          32
+
+/******************************************************************************
+ * STRUCTURES
+ *****************************************************************************/
+/**
+ * struct ci13xxx_ep - endpoint representation
+ * @ep: endpoint structure for gadget drivers
+ * @dir: endpoint direction (TX/RX)
+ * @num: endpoint number
+ * @type: endpoint type
+ * @name: string description of the endpoint
+ * @qh: queue head for this endpoint
+ * @wedge: is the endpoint wedged
+ * @udc: pointer to the controller
+ * @lock: pointer to controller's spinlock
+ * @td_pool: pointer to controller's TD pool
+ */
+struct ci13xxx_ep {
+	struct usb_ep				ep;
+	u8					dir;
+	u8					num;
+	u8					type;
+	char					name[16];
+	struct {
+		struct list_head	queue;
+		struct ci13xxx_qh	*ptr;
+		dma_addr_t		dma;
+	}					qh;
+	int					wedge;
+
+	/* global resources */
+	struct ci13xxx				*udc;
+	spinlock_t				*lock;
+	struct dma_pool				*td_pool;
+};
+
+enum ci_role {
+	CI_ROLE_HOST = 0,
+	CI_ROLE_GADGET,
+	CI_ROLE_END,
+};
+
+/**
+ * struct ci_role_driver - host/gadget role driver
+ * start: start this role
+ * stop: stop this role
+ * irq: irq handler for this role
+ * name: role name string (host/gadget)
+ */
+struct ci_role_driver {
+	int		(*start)(struct ci13xxx *);
+	void		(*stop)(struct ci13xxx *);
+	irqreturn_t	(*irq)(struct ci13xxx *);
+	const char	*name;
+};
+
+/**
+ * struct hw_bank - hardware register mapping representation
+ * @lpm: set if the device is LPM capable
+ * @phys: physical address of the controller's registers
+ * @abs: absolute address of the beginning of register window
+ * @cap: capability registers
+ * @op: operational registers
+ * @size: size of the register window
+ * @regmap: register lookup table
+ */
+struct hw_bank {
+	unsigned	lpm;
+	resource_size_t	phys;
+	void __iomem	*abs;
+	void __iomem	*cap;
+	void __iomem	*op;
+	size_t		size;
+	void __iomem	**regmap;
+};
+
+/**
+ * struct ci13xxx - chipidea device representation
+ * @dev: pointer to parent device
+ * @lock: access synchronization
+ * @hw_bank: hardware register mapping
+ * @irq: IRQ number
+ * @roles: array of supported roles for this controller
+ * @role: current role
+ * @is_otg: if the device is otg-capable
+ * @work: work for role changing
+ * @wq: workqueue thread
+ * @qh_pool: allocation pool for queue heads
+ * @td_pool: allocation pool for transfer descriptors
+ * @gadget: device side representation for peripheral controller
+ * @driver: gadget driver
+ * @hw_ep_max: total number of endpoints supported by hardware
+ * @ci13xxx_ep: array of endpoints
+ * @ep0_dir: ep0 direction
+ * @ep0out: pointer to ep0 OUT endpoint
+ * @ep0in: pointer to ep0 IN endpoint
+ * @status: ep0 status request
+ * @setaddr: if we should set the address on status completion
+ * @address: usb address received from the host
+ * @remote_wakeup: host-enabled remote wakeup
+ * @suspended: suspended by host
+ * @test_mode: the selected test mode
+ * @udc_driver: platform specific information supplied by parent device
+ * @vbus_active: is VBUS active
+ * @transceiver: pointer to USB PHY, if any
+ * @hcd: pointer to usb_hcd for ehci host driver
+ */
+struct ci13xxx {
+	struct device			*dev;
+	spinlock_t			lock;
+	struct hw_bank			hw_bank;
+	int				irq;
+	struct ci_role_driver		*roles[CI_ROLE_END];
+	enum ci_role			role;
+	bool				is_otg;
+	struct work_struct		work;
+	struct workqueue_struct		*wq;
+
+	struct dma_pool			*qh_pool;
+	struct dma_pool			*td_pool;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	unsigned			hw_ep_max;
+	struct ci13xxx_ep		ci13xxx_ep[ENDPT_MAX];
+	u32				ep0_dir;
+	struct ci13xxx_ep		*ep0out, *ep0in;
+
+	struct usb_request		*status;
+	bool				setaddr;
+	u8				address;
+	u8				remote_wakeup;
+	u8				suspended;
+	u8				test_mode;
+
+	struct ci13xxx_udc_driver	*udc_driver;
+	int				vbus_active;
+	struct usb_phy			*transceiver;
+	struct usb_hcd			*hcd;
+};
+
+static inline struct ci_role_driver *ci_role(struct ci13xxx *ci)
+{
+	BUG_ON(ci->role >= CI_ROLE_END || !ci->roles[ci->role]);
+	return ci->roles[ci->role];
+}
+
+static inline int ci_role_start(struct ci13xxx *ci, enum ci_role role)
+{
+	int ret;
+
+	if (role >= CI_ROLE_END)
+		return -EINVAL;
+
+	if (!ci->roles[role])
+		return -ENXIO;
+
+	ret = ci->roles[role]->start(ci);
+	if (!ret)
+		ci->role = role;
+	return ret;
+}
+
+static inline void ci_role_stop(struct ci13xxx *ci)
+{
+	enum ci_role role = ci->role;
+
+	if (role == CI_ROLE_END)
+		return;
+
+	ci->role = CI_ROLE_END;
+
+	ci->roles[role]->stop(ci);
+}
+
+/******************************************************************************
+ * REGISTERS
+ *****************************************************************************/
+/* register size */
+#define REG_BITS   (32)
+
+/* register indices */
+enum ci13xxx_regs {
+	CAP_CAPLENGTH,
+	CAP_HCCPARAMS,
+	CAP_DCCPARAMS,
+	CAP_TESTMODE,
+	CAP_LAST = CAP_TESTMODE,
+	OP_USBCMD,
+	OP_USBSTS,
+	OP_USBINTR,
+	OP_DEVICEADDR,
+	OP_ENDPTLISTADDR,
+	OP_PORTSC,
+	OP_DEVLC,
+	OP_OTGSC,
+	OP_USBMODE,
+	OP_ENDPTSETUPSTAT,
+	OP_ENDPTPRIME,
+	OP_ENDPTFLUSH,
+	OP_ENDPTSTAT,
+	OP_ENDPTCOMPLETE,
+	OP_ENDPTCTRL,
+	/* endptctrl1..15 follow */
+	OP_LAST = OP_ENDPTCTRL + ENDPT_MAX / 2,
+};
+
+/**
+ * ffs_nr: find first (least significant) bit set
+ * @x: the word to search
+ *
+ * This function returns bit number (instead of position)
+ */
+static inline int ffs_nr(u32 x)
+{
+	int n = ffs(x);
+
+	return n ? n-1 : 32;
+}
+
+/**
+ * hw_read: reads from a hw register
+ * @reg:  register index
+ * @mask: bitfield mask
+ *
+ * This function returns register contents
+ */
+static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask)
+{
+	return ioread32(udc->hw_bank.regmap[reg]) & mask;
+}
+
+/**
+ * hw_write: writes to a hw register
+ * @reg:  register index
+ * @mask: bitfield mask
+ * @data: new value
+ */
+static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
+			    u32 mask, u32 data)
+{
+	if (~mask)
+		data = (ioread32(udc->hw_bank.regmap[reg]) & ~mask)
+			| (data & mask);
+
+	iowrite32(data, udc->hw_bank.regmap[reg]);
+}
+
+/**
+ * hw_test_and_clear: tests & clears a hw register
+ * @reg:  register index
+ * @mask: bitfield mask
+ *
+ * This function returns register contents
+ */
+static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg,
+				    u32 mask)
+{
+	u32 val = ioread32(udc->hw_bank.regmap[reg]) & mask;
+
+	iowrite32(val, udc->hw_bank.regmap[reg]);
+	return val;
+}
+
+/**
+ * hw_test_and_write: tests & writes a hw register
+ * @reg:  register index
+ * @mask: bitfield mask
+ * @data: new value
+ *
+ * This function returns register contents
+ */
+static inline u32 hw_test_and_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
+				    u32 mask, u32 data)
+{
+	u32 val = hw_read(udc, reg, ~0);
+
+	hw_write(udc, reg, mask, data);
+	return (val & mask) >> ffs_nr(mask);
+}
+
+int hw_device_reset(struct ci13xxx *ci, u32 mode);
+
+int hw_port_test_set(struct ci13xxx *ci, u8 mode);
+
+u8 hw_port_test_get(struct ci13xxx *ci);
+
+#endif	/* __DRIVERS_USB_CHIPIDEA_CI_H */
diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index d07e44c05e9b..958069ef95e3 100644
--- a/drivers/usb/gadget/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -10,15 +10,12 @@
 #include <linux/pm_runtime.h>
 #include <linux/usb/msm_hsusb_hw.h>
 #include <linux/usb/ulpi.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/chipidea.h>
 
-#include "ci13xxx_udc.c"
+#include "ci.h"
 
-#define MSM_USB_BASE	(udc->regs)
-
-static irqreturn_t msm_udc_irq(int irq, void *data)
-{
-	return udc_irq();
-}
+#define MSM_USB_BASE	(udc->hw_bank.abs)
 
 static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
 {
@@ -60,53 +57,40 @@ static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = {
 
 static int ci13xxx_msm_probe(struct platform_device *pdev)
 {
-	struct resource *res;
-	void __iomem *regs;
-	int irq;
+	struct platform_device *plat_ci;
 	int ret;
 
 	dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n");
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to get platform resource mem\n");
-		return -ENXIO;
-	}
-
-	regs = ioremap(res->start, resource_size(res));
-	if (!regs) {
-		dev_err(&pdev->dev, "ioremap failed\n");
+	plat_ci = platform_device_alloc("ci_hdrc", -1);
+	if (!plat_ci) {
+		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
 		return -ENOMEM;
 	}
 
-	ret = udc_probe(&ci13xxx_msm_udc_driver, &pdev->dev, regs);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "udc_probe failed\n");
-		goto iounmap;
+	ret = platform_device_add_resources(plat_ci, pdev->resource,
+					    pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "can't add resources to platform device\n");
+		goto put_platform;
 	}
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "IRQ not found\n");
-		ret = -ENXIO;
-		goto udc_remove;
-	}
+	ret = platform_device_add_data(plat_ci, &ci13xxx_msm_udc_driver,
+				       sizeof(ci13xxx_msm_udc_driver));
+	if (ret)
+		goto put_platform;
 
-	ret = request_irq(irq, msm_udc_irq, IRQF_SHARED, pdev->name, pdev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "request_irq failed\n");
-		goto udc_remove;
-	}
+	ret = platform_device_add(plat_ci);
+	if (ret)
+		goto put_platform;
 
 	pm_runtime_no_callbacks(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	return 0;
 
-udc_remove:
-	udc_remove();
-iounmap:
-	iounmap(regs);
+put_platform:
+	platform_device_put(plat_ci);
 
 	return ret;
 }
diff --git a/drivers/usb/gadget/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c
index 883ab5e832d1..e3dab27f5c75 100644
--- a/drivers/usb/gadget/ci13xxx_pci.c
+++ b/drivers/usb/chipidea/ci13xxx_pci.c
@@ -10,10 +10,12 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-
-#include "ci13xxx_udc.c"
+#include <linux/interrupt.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/chipidea.h>
 
 /* driver name */
 #define UDC_DRIVER_NAME   "ci13xxx_pci"
@@ -21,25 +23,20 @@
 /******************************************************************************
  * PCI block
  *****************************************************************************/
-/**
- * ci13xxx_pci_irq: interrut handler
- * @irq:  irq number
- * @pdev: USB Device Controller interrupt source
- *
- * This function returns IRQ_HANDLED if the IRQ has been handled
- * This is an ISR don't trace, use attribute interface instead
- */
-static irqreturn_t ci13xxx_pci_irq(int irq, void *pdev)
-{
-	if (irq == 0) {
-		dev_err(&((struct pci_dev *)pdev)->dev, "Invalid IRQ0 usage!");
-		return IRQ_HANDLED;
-	}
-	return udc_irq();
-}
+struct ci13xxx_udc_driver pci_driver = {
+	.name		= UDC_DRIVER_NAME,
+	.capoffset	= DEF_CAPOFFSET,
+};
 
-static struct ci13xxx_udc_driver ci13xxx_pci_udc_driver = {
+struct ci13xxx_udc_driver langwell_pci_driver = {
 	.name		= UDC_DRIVER_NAME,
+	.capoffset	= 0,
+};
+
+struct ci13xxx_udc_driver penwell_pci_driver = {
+	.name		= UDC_DRIVER_NAME,
+	.capoffset	= 0,
+	.power_budget	= 200,
 };
 
 /**
@@ -54,11 +51,15 @@ static struct ci13xxx_udc_driver ci13xxx_pci_udc_driver = {
 static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 				       const struct pci_device_id *id)
 {
-	void __iomem *regs = NULL;
-	int retval = 0;
-
-	if (id == NULL)
-		return -EINVAL;
+	struct ci13xxx_udc_driver *driver = (void *)id->driver_data;
+	struct platform_device *plat_ci;
+	struct resource res[3];
+	int retval = 0, nres = 2;
+
+	if (!driver) {
+		dev_err(&pdev->dev, "device doesn't provide driver data\n");
+		return -ENODEV;
+	}
 
 	retval = pci_enable_device(pdev);
 	if (retval)
@@ -70,41 +71,50 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 		goto disable_device;
 	}
 
-	retval = pci_request_regions(pdev, UDC_DRIVER_NAME);
-	if (retval)
-		goto disable_device;
+	pci_set_power_state(pdev, PCI_D0);
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
 
-	/* BAR 0 holds all the registers */
-	regs = pci_iomap(pdev, 0, 0);
-	if (!regs) {
-		dev_err(&pdev->dev, "Error mapping memory!");
-		retval = -EFAULT;
-		goto release_regions;
+	plat_ci = platform_device_alloc("ci_hdrc", -1);
+	if (!plat_ci) {
+		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
+		retval = -ENOMEM;
+		goto disable_device;
 	}
-	pci_set_drvdata(pdev, (__force void *)regs);
 
-	pci_set_master(pdev);
-	pci_try_set_mwi(pdev);
+	memset(res, 0, sizeof(res));
+	res[0].start	= pci_resource_start(pdev, 0);
+	res[0].end	= pci_resource_end(pdev, 0);
+	res[0].flags	= IORESOURCE_MEM;
+	res[1].start	= pdev->irq;
+	res[1].flags	= IORESOURCE_IRQ;
+
+	retval = platform_device_add_resources(plat_ci, res, nres);
+	if (retval) {
+		dev_err(&pdev->dev, "can't add resources to platform device\n");
+		goto put_platform;
+	}
 
-	retval = udc_probe(&ci13xxx_pci_udc_driver, &pdev->dev, regs);
+	retval = platform_device_add_data(plat_ci, driver, sizeof(*driver));
 	if (retval)
-		goto iounmap;
+		goto put_platform;
+
+	dma_set_coherent_mask(&plat_ci->dev, pdev->dev.coherent_dma_mask);
+	plat_ci->dev.dma_mask = pdev->dev.dma_mask;
+	plat_ci->dev.dma_parms = pdev->dev.dma_parms;
+	plat_ci->dev.parent = &pdev->dev;
 
-	/* our device does not have MSI capability */
+	pci_set_drvdata(pdev, plat_ci);
 
-	retval = request_irq(pdev->irq, ci13xxx_pci_irq, IRQF_SHARED,
-			     UDC_DRIVER_NAME, pdev);
+	retval = platform_device_add(plat_ci);
 	if (retval)
-		goto gadget_remove;
+		goto put_platform;
 
 	return 0;
 
- gadget_remove:
-	udc_remove();
- iounmap:
-	pci_iounmap(pdev, regs);
- release_regions:
-	pci_release_regions(pdev);
+ put_platform:
+	pci_set_drvdata(pdev, NULL);
+	platform_device_put(plat_ci);
  disable_device:
 	pci_disable_device(pdev);
  done:
@@ -121,10 +131,10 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
  */
 static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
 {
-	free_irq(pdev->irq, pdev);
-	udc_remove();
-	pci_iounmap(pdev, (__force void __iomem *)pci_get_drvdata(pdev));
-	pci_release_regions(pdev);
+	struct platform_device *plat_ci = pci_get_drvdata(pdev);
+
+	platform_device_unregister(plat_ci);
+	pci_set_drvdata(pdev, NULL);
 	pci_disable_device(pdev);
 }
 
@@ -135,8 +145,22 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
  * Check "pci.h" for details
  */
 static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = {
-	{ PCI_DEVICE(0x153F, 0x1004) },
-	{ PCI_DEVICE(0x153F, 0x1006) },
+	{
+		PCI_DEVICE(0x153F, 0x1004),
+		.driver_data = (kernel_ulong_t)&pci_driver,
+	},
+	{
+		PCI_DEVICE(0x153F, 0x1006),
+		.driver_data = (kernel_ulong_t)&pci_driver,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811),
+		.driver_data = (kernel_ulong_t)&langwell_pci_driver,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829),
+		.driver_data = (kernel_ulong_t)&penwell_pci_driver,
+	},
 	{ 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table);
@@ -148,27 +172,7 @@ static struct pci_driver ci13xxx_pci_driver = {
 	.remove       =	__devexit_p(ci13xxx_pci_remove),
 };
 
-/**
- * ci13xxx_pci_init: module init
- *
- * Driver load
- */
-static int __init ci13xxx_pci_init(void)
-{
-	return pci_register_driver(&ci13xxx_pci_driver);
-}
-module_init(ci13xxx_pci_init);
-
-/**
- * ci13xxx_pci_exit: module exit
- *
- * Driver unload
- */
-static void __exit ci13xxx_pci_exit(void)
-{
-	pci_unregister_driver(&ci13xxx_pci_driver);
-}
-module_exit(ci13xxx_pci_exit);
+module_pci_driver(ci13xxx_pci_driver);
 
 MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>");
 MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller");
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
new file mode 100644
index 000000000000..15e03b308f8a
--- /dev/null
+++ b/drivers/usb/chipidea/core.c
@@ -0,0 +1,474 @@
+/*
+ * core.c - ChipIdea USB IP core family device controller
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Description: ChipIdea USB IP core family device controller
+ *
+ * This driver is composed of several blocks:
+ * - HW:     hardware interface
+ * - DBG:    debug facilities (optional)
+ * - UTIL:   utilities
+ * - ISR:    interrupts handling
+ * - ENDPT:  endpoint operations (Gadget API)
+ * - GADGET: gadget operations (Gadget API)
+ * - BUS:    bus glue code, bus abstraction layer
+ *
+ * Compile Options
+ * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
+ * - STALL_IN:  non-empty bulk-in pipes cannot be halted
+ *              if defined mass storage compliance succeeds but with warnings
+ *              => case 4: Hi >  Dn
+ *              => case 5: Hi >  Di
+ *              => case 8: Hi <> Do
+ *              if undefined usbtest 13 fails
+ * - TRACE:     enable function tracing (depends on DEBUG)
+ *
+ * Main Features
+ * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
+ * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
+ * - Normal & LPM support
+ *
+ * USBTEST Report
+ * - OK: 0-12, 13 (STALL_IN defined) & 14
+ * - Not Supported: 15 & 16 (ISO)
+ *
+ * TODO List
+ * - OTG
+ * - Isochronous & Interrupt Traffic
+ * - Handle requests which spawns into several TDs
+ * - GET_STATUS(device) - always reports 0
+ * - Gadget API (majority of optional features)
+ * - Suspend & Remote Wakeup
+ */
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+#include "udc.h"
+#include "bits.h"
+#include "host.h"
+#include "debug.h"
+
+/* Controller register map */
+static uintptr_t ci_regs_nolpm[] = {
+	[CAP_CAPLENGTH]		= 0x000UL,
+	[CAP_HCCPARAMS]		= 0x008UL,
+	[CAP_DCCPARAMS]		= 0x024UL,
+	[CAP_TESTMODE]		= 0x038UL,
+	[OP_USBCMD]		= 0x000UL,
+	[OP_USBSTS]		= 0x004UL,
+	[OP_USBINTR]		= 0x008UL,
+	[OP_DEVICEADDR]		= 0x014UL,
+	[OP_ENDPTLISTADDR]	= 0x018UL,
+	[OP_PORTSC]		= 0x044UL,
+	[OP_DEVLC]		= 0x084UL,
+	[OP_OTGSC]		= 0x064UL,
+	[OP_USBMODE]		= 0x068UL,
+	[OP_ENDPTSETUPSTAT]	= 0x06CUL,
+	[OP_ENDPTPRIME]		= 0x070UL,
+	[OP_ENDPTFLUSH]		= 0x074UL,
+	[OP_ENDPTSTAT]		= 0x078UL,
+	[OP_ENDPTCOMPLETE]	= 0x07CUL,
+	[OP_ENDPTCTRL]		= 0x080UL,
+};
+
+static uintptr_t ci_regs_lpm[] = {
+	[CAP_CAPLENGTH]		= 0x000UL,
+	[CAP_HCCPARAMS]		= 0x008UL,
+	[CAP_DCCPARAMS]		= 0x024UL,
+	[CAP_TESTMODE]		= 0x0FCUL,
+	[OP_USBCMD]		= 0x000UL,
+	[OP_USBSTS]		= 0x004UL,
+	[OP_USBINTR]		= 0x008UL,
+	[OP_DEVICEADDR]		= 0x014UL,
+	[OP_ENDPTLISTADDR]	= 0x018UL,
+	[OP_PORTSC]		= 0x044UL,
+	[OP_DEVLC]		= 0x084UL,
+	[OP_OTGSC]		= 0x0C4UL,
+	[OP_USBMODE]		= 0x0C8UL,
+	[OP_ENDPTSETUPSTAT]	= 0x0D8UL,
+	[OP_ENDPTPRIME]		= 0x0DCUL,
+	[OP_ENDPTFLUSH]		= 0x0E0UL,
+	[OP_ENDPTSTAT]		= 0x0E4UL,
+	[OP_ENDPTCOMPLETE]	= 0x0E8UL,
+	[OP_ENDPTCTRL]		= 0x0ECUL,
+};
+
+static int hw_alloc_regmap(struct ci13xxx *ci, bool is_lpm)
+{
+	int i;
+
+	kfree(ci->hw_bank.regmap);
+
+	ci->hw_bank.regmap = kzalloc((OP_LAST + 1) * sizeof(void *),
+				     GFP_KERNEL);
+	if (!ci->hw_bank.regmap)
+		return -ENOMEM;
+
+	for (i = 0; i < OP_ENDPTCTRL; i++)
+		ci->hw_bank.regmap[i] =
+			(i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
+			(is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
+
+	for (; i <= OP_LAST; i++)
+		ci->hw_bank.regmap[i] = ci->hw_bank.op +
+			4 * (i - OP_ENDPTCTRL) +
+			(is_lpm
+			 ? ci_regs_lpm[OP_ENDPTCTRL]
+			 : ci_regs_nolpm[OP_ENDPTCTRL]);
+
+	return 0;
+}
+
+/**
+ * hw_port_test_set: writes port test mode (execute without interruption)
+ * @mode: new value
+ *
+ * This function returns an error code
+ */
+int hw_port_test_set(struct ci13xxx *ci, u8 mode)
+{
+	const u8 TEST_MODE_MAX = 7;
+
+	if (mode > TEST_MODE_MAX)
+		return -EINVAL;
+
+	hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC));
+	return 0;
+}
+
+/**
+ * hw_port_test_get: reads port test mode value
+ *
+ * This function returns port test mode value
+ */
+u8 hw_port_test_get(struct ci13xxx *ci)
+{
+	return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC);
+}
+
+static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
+{
+	u32 reg;
+
+	/* bank is a module variable */
+	ci->hw_bank.abs = base;
+
+	ci->hw_bank.cap = ci->hw_bank.abs;
+	ci->hw_bank.cap += ci->udc_driver->capoffset;
+	ci->hw_bank.op = ci->hw_bank.cap + ioread8(ci->hw_bank.cap);
+
+	hw_alloc_regmap(ci, false);
+	reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
+		ffs_nr(HCCPARAMS_LEN);
+	ci->hw_bank.lpm  = reg;
+	hw_alloc_regmap(ci, !!reg);
+	ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
+	ci->hw_bank.size += OP_LAST;
+	ci->hw_bank.size /= sizeof(u32);
+
+	reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
+		ffs_nr(DCCPARAMS_DEN);
+	ci->hw_ep_max = reg * 2;   /* cache hw ENDPT_MAX */
+
+	if (ci->hw_ep_max > ENDPT_MAX)
+		return -ENODEV;
+
+	dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n",
+		ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
+
+	/* setup lock mode ? */
+
+	/* ENDPTSETUPSTAT is '0' by default */
+
+	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
+
+	return 0;
+}
+
+/**
+ * hw_device_reset: resets chip (execute without interruption)
+ * @ci: the controller
+  *
+ * This function returns an error code
+ */
+int hw_device_reset(struct ci13xxx *ci, u32 mode)
+{
+	/* should flush & stop before reset */
+	hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
+	hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+
+	hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
+	while (hw_read(ci, OP_USBCMD, USBCMD_RST))
+		udelay(10);		/* not RTOS friendly */
+
+
+	if (ci->udc_driver->notify_event)
+		ci->udc_driver->notify_event(ci,
+			CI13XXX_CONTROLLER_RESET_EVENT);
+
+	if (ci->udc_driver->flags & CI13XXX_DISABLE_STREAMING)
+		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+
+	/* USBMODE should be configured step by step */
+	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
+	hw_write(ci, OP_USBMODE, USBMODE_CM, mode);
+	/* HW >= 2.3 */
+	hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
+
+	if (hw_read(ci, OP_USBMODE, USBMODE_CM) != mode) {
+		pr_err("cannot enter in %s mode", ci_role(ci)->name);
+		pr_err("lpm = %i", ci->hw_bank.lpm);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/**
+ * ci_otg_role - pick role based on ID pin state
+ * @ci: the controller
+ */
+static enum ci_role ci_otg_role(struct ci13xxx *ci)
+{
+	u32 sts = hw_read(ci, OP_OTGSC, ~0);
+	enum ci_role role = sts & OTGSC_ID
+		? CI_ROLE_GADGET
+		: CI_ROLE_HOST;
+
+	return role;
+}
+
+/**
+ * ci_role_work - perform role changing based on ID pin
+ * @work: work struct
+ */
+static void ci_role_work(struct work_struct *work)
+{
+	struct ci13xxx *ci = container_of(work, struct ci13xxx, work);
+	enum ci_role role = ci_otg_role(ci);
+
+	hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS);
+
+	if (role != ci->role) {
+		dev_dbg(ci->dev, "switching from %s to %s\n",
+			ci_role(ci)->name, ci->roles[role]->name);
+
+		ci_role_stop(ci);
+		ci_role_start(ci, role);
+	}
+}
+
+static ssize_t show_role(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct ci13xxx *ci = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", ci_role(ci)->name);
+}
+
+static ssize_t store_role(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct ci13xxx *ci = dev_get_drvdata(dev);
+	enum ci_role role;
+	int ret;
+
+	for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++)
+		if (ci->roles[role] && !strcmp(buf, ci->roles[role]->name))
+			break;
+
+	if (role == CI_ROLE_END || role == ci->role)
+		return -EINVAL;
+
+	ci_role_stop(ci);
+	ret = ci_role_start(ci, role);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(role, S_IRUSR | S_IWUSR, show_role, store_role);
+
+static irqreturn_t ci_irq(int irq, void *data)
+{
+	struct ci13xxx *ci = data;
+	irqreturn_t ret = IRQ_NONE;
+
+	if (ci->is_otg) {
+		u32 sts = hw_read(ci, OP_OTGSC, ~0);
+
+		if (sts & OTGSC_IDIS) {
+			queue_work(ci->wq, &ci->work);
+			ret = IRQ_HANDLED;
+		}
+	}
+
+	return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci);
+}
+
+static int __devinit ci_hdrc_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	struct ci13xxx	*ci;
+	struct resource	*res;
+	void __iomem	*base;
+	int		ret;
+
+	if (!dev->platform_data) {
+		dev_err(dev, "platform data missing\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "missing resource\n");
+		return -ENODEV;
+	}
+
+	base = devm_request_and_ioremap(dev, res);
+	if (!res) {
+		dev_err(dev, "can't request and ioremap resource\n");
+		return -ENOMEM;
+	}
+
+	ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
+	if (!ci) {
+		dev_err(dev, "can't allocate device\n");
+		return -ENOMEM;
+	}
+
+	ci->dev = dev;
+	ci->udc_driver = dev->platform_data;
+
+	ret = hw_device_init(ci, base);
+	if (ret < 0) {
+		dev_err(dev, "can't initialize hardware\n");
+		return -ENODEV;
+	}
+
+	ci->hw_bank.phys = res->start;
+
+	ci->irq = platform_get_irq(pdev, 0);
+	if (ci->irq < 0) {
+		dev_err(dev, "missing IRQ\n");
+		return -ENODEV;
+	}
+
+	INIT_WORK(&ci->work, ci_role_work);
+	ci->wq = create_singlethread_workqueue("ci_otg");
+	if (!ci->wq) {
+		dev_err(dev, "can't create workqueue\n");
+		return -ENODEV;
+	}
+
+	/* initialize role(s) before the interrupt is requested */
+	ret = ci_hdrc_host_init(ci);
+	if (ret)
+		dev_info(dev, "doesn't support host\n");
+
+	ret = ci_hdrc_gadget_init(ci);
+	if (ret)
+		dev_info(dev, "doesn't support gadget\n");
+
+	if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
+		dev_err(dev, "no supported roles\n");
+		ret = -ENODEV;
+		goto rm_wq;
+	}
+
+	if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
+		ci->is_otg = true;
+		ci->role = ci_otg_role(ci);
+	} else {
+		ci->role = ci->roles[CI_ROLE_HOST]
+			? CI_ROLE_HOST
+			: CI_ROLE_GADGET;
+	}
+
+	ret = ci_role_start(ci, ci->role);
+	if (ret) {
+		dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
+		ret = -ENODEV;
+		goto rm_wq;
+	}
+
+	platform_set_drvdata(pdev, ci);
+	ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->udc_driver->name,
+			  ci);
+	if (ret)
+		goto stop;
+
+	ret = device_create_file(dev, &dev_attr_role);
+	if (ret)
+		goto rm_attr;
+
+	if (ci->is_otg)
+		hw_write(ci, OP_OTGSC, OTGSC_IDIE, OTGSC_IDIE);
+
+	return ret;
+
+rm_attr:
+	device_remove_file(dev, &dev_attr_role);
+stop:
+	ci_role_stop(ci);
+rm_wq:
+	flush_workqueue(ci->wq);
+	destroy_workqueue(ci->wq);
+
+	return ret;
+}
+
+static int __devexit ci_hdrc_remove(struct platform_device *pdev)
+{
+	struct ci13xxx *ci = platform_get_drvdata(pdev);
+
+	flush_workqueue(ci->wq);
+	destroy_workqueue(ci->wq);
+	device_remove_file(ci->dev, &dev_attr_role);
+	free_irq(ci->irq, ci);
+	ci_role_stop(ci);
+
+	return 0;
+}
+
+static struct platform_driver ci_hdrc_driver = {
+	.probe	= ci_hdrc_probe,
+	.remove	= __devexit_p(ci_hdrc_remove),
+	.driver	= {
+		.name	= "ci_hdrc",
+	},
+};
+
+module_platform_driver(ci_hdrc_driver);
+
+MODULE_ALIAS("platform:ci_hdrc");
+MODULE_ALIAS("platform:ci13xxx");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
+MODULE_DESCRIPTION("ChipIdea HDRC Driver");
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
new file mode 100644
index 000000000000..c4b3e15532db
--- /dev/null
+++ b/drivers/usb/chipidea/debug.c
@@ -0,0 +1,804 @@
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+#include "udc.h"
+#include "bits.h"
+#include "debug.h"
+
+/* Interrupt statistics */
+#define ISR_MASK   0x1F
+static struct isr_statistics {
+	u32 test;
+	u32 ui;
+	u32 uei;
+	u32 pci;
+	u32 uri;
+	u32 sli;
+	u32 none;
+	struct {
+		u32 cnt;
+		u32 buf[ISR_MASK+1];
+		u32 idx;
+	} hndl;
+} isr_statistics;
+
+void dbg_interrupt(u32 intmask)
+{
+	if (!intmask) {
+		isr_statistics.none++;
+		return;
+	}
+
+	isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intmask;
+	isr_statistics.hndl.idx &= ISR_MASK;
+	isr_statistics.hndl.cnt++;
+
+	if (USBi_URI & intmask)
+		isr_statistics.uri++;
+	if (USBi_PCI & intmask)
+		isr_statistics.pci++;
+	if (USBi_UEI & intmask)
+		isr_statistics.uei++;
+	if (USBi_UI  & intmask)
+		isr_statistics.ui++;
+	if (USBi_SLI & intmask)
+		isr_statistics.sli++;
+}
+
+/**
+ * hw_register_read: reads all device registers (execute without interruption)
+ * @buf:  destination buffer
+ * @size: buffer size
+ *
+ * This function returns number of registers read
+ */
+static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size)
+{
+	unsigned i;
+
+	if (size > udc->hw_bank.size)
+		size = udc->hw_bank.size;
+
+	for (i = 0; i < size; i++)
+		buf[i] = hw_read(udc, i * sizeof(u32), ~0);
+
+	return size;
+}
+
+/**
+ * hw_register_write: writes to register
+ * @addr: register address
+ * @data: register value
+ *
+ * This function returns an error code
+ */
+static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data)
+{
+	/* align */
+	addr /= sizeof(u32);
+
+	if (addr >= udc->hw_bank.size)
+		return -EINVAL;
+
+	/* align */
+	addr *= sizeof(u32);
+
+	hw_write(udc, addr, ~0, data);
+	return 0;
+}
+
+/**
+ * hw_intr_clear: disables interrupt & clears interrupt status (execute without
+ *                interruption)
+ * @n: interrupt bit
+ *
+ * This function returns an error code
+ */
+static int hw_intr_clear(struct ci13xxx *udc, int n)
+{
+	if (n >= REG_BITS)
+		return -EINVAL;
+
+	hw_write(udc, OP_USBINTR, BIT(n), 0);
+	hw_write(udc, OP_USBSTS,  BIT(n), BIT(n));
+	return 0;
+}
+
+/**
+ * hw_intr_force: enables interrupt & forces interrupt status (execute without
+ *                interruption)
+ * @n: interrupt bit
+ *
+ * This function returns an error code
+ */
+static int hw_intr_force(struct ci13xxx *udc, int n)
+{
+	if (n >= REG_BITS)
+		return -EINVAL;
+
+	hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE);
+	hw_write(udc, OP_USBINTR,  BIT(n), BIT(n));
+	hw_write(udc, OP_USBSTS,   BIT(n), BIT(n));
+	hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, 0);
+	return 0;
+}
+
+/**
+ * show_device: prints information about device capabilities and status
+ *
+ * Check "device.h" for details
+ */
+static ssize_t show_device(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct usb_gadget *gadget = &udc->gadget;
+	int n = 0;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		return 0;
+	}
+
+	n += scnprintf(buf + n, PAGE_SIZE - n, "speed             = %d\n",
+		       gadget->speed);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed         = %d\n",
+		       gadget->max_speed);
+	/* TODO: Scheduled for removal in 3.8. */
+	n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed      = %d\n",
+		       gadget_is_dualspeed(gadget));
+	n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg            = %d\n",
+		       gadget->is_otg);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral   = %d\n",
+		       gadget->is_a_peripheral);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "b_hnp_enable      = %d\n",
+		       gadget->b_hnp_enable);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "a_hnp_support     = %d\n",
+		       gadget->a_hnp_support);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "a_alt_hnp_support = %d\n",
+		       gadget->a_alt_hnp_support);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "name              = %s\n",
+		       (gadget->name ? gadget->name : ""));
+
+	return n;
+}
+static DEVICE_ATTR(device, S_IRUSR, show_device, NULL);
+
+/**
+ * show_driver: prints information about attached gadget (if any)
+ *
+ * Check "device.h" for details
+ */
+static ssize_t show_driver(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct usb_gadget_driver *driver = udc->driver;
+	int n = 0;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(dev, "[%s] EINVAL\n", __func__);
+		return 0;
+	}
+
+	if (driver == NULL)
+		return scnprintf(buf, PAGE_SIZE,
+				 "There is no gadget attached!\n");
+
+	n += scnprintf(buf + n, PAGE_SIZE - n, "function  = %s\n",
+		       (driver->function ? driver->function : ""));
+	n += scnprintf(buf + n, PAGE_SIZE - n, "max speed = %d\n",
+		       driver->max_speed);
+
+	return n;
+}
+static DEVICE_ATTR(driver, S_IRUSR, show_driver, NULL);
+
+/* Maximum event message length */
+#define DBG_DATA_MSG   64UL
+
+/* Maximum event messages */
+#define DBG_DATA_MAX   128UL
+
+/* Event buffer descriptor */
+static struct {
+	char     (buf[DBG_DATA_MAX])[DBG_DATA_MSG];   /* buffer */
+	unsigned idx;   /* index */
+	unsigned tty;   /* print to console? */
+	rwlock_t lck;   /* lock */
+} dbg_data = {
+	.idx = 0,
+	.tty = 0,
+	.lck = __RW_LOCK_UNLOCKED(lck)
+};
+
+/**
+ * dbg_dec: decrements debug event index
+ * @idx: buffer index
+ */
+static void dbg_dec(unsigned *idx)
+{
+	*idx = (*idx - 1) & (DBG_DATA_MAX-1);
+}
+
+/**
+ * dbg_inc: increments debug event index
+ * @idx: buffer index
+ */
+static void dbg_inc(unsigned *idx)
+{
+	*idx = (*idx + 1) & (DBG_DATA_MAX-1);
+}
+
+/**
+ * dbg_print:  prints the common part of the event
+ * @addr:   endpoint address
+ * @name:   event name
+ * @status: status
+ * @extra:  extra information
+ */
+static void dbg_print(u8 addr, const char *name, int status, const char *extra)
+{
+	struct timeval tval;
+	unsigned int stamp;
+	unsigned long flags;
+
+	write_lock_irqsave(&dbg_data.lck, flags);
+
+	do_gettimeofday(&tval);
+	stamp = tval.tv_sec & 0xFFFF;	/* 2^32 = 4294967296. Limit to 4096s */
+	stamp = stamp * 1000000 + tval.tv_usec;
+
+	scnprintf(dbg_data.buf[dbg_data.idx], DBG_DATA_MSG,
+		  "%04X\t? %02X %-7.7s %4i ?\t%s\n",
+		  stamp, addr, name, status, extra);
+
+	dbg_inc(&dbg_data.idx);
+
+	write_unlock_irqrestore(&dbg_data.lck, flags);
+
+	if (dbg_data.tty != 0)
+		pr_notice("%04X\t? %02X %-7.7s %4i ?\t%s\n",
+			  stamp, addr, name, status, extra);
+}
+
+/**
+ * dbg_done: prints a DONE event
+ * @addr:   endpoint address
+ * @td:     transfer descriptor
+ * @status: status
+ */
+void dbg_done(u8 addr, const u32 token, int status)
+{
+	char msg[DBG_DATA_MSG];
+
+	scnprintf(msg, sizeof(msg), "%d %02X",
+		  (int)(token & TD_TOTAL_BYTES) >> ffs_nr(TD_TOTAL_BYTES),
+		  (int)(token & TD_STATUS)      >> ffs_nr(TD_STATUS));
+	dbg_print(addr, "DONE", status, msg);
+}
+
+/**
+ * dbg_event: prints a generic event
+ * @addr:   endpoint address
+ * @name:   event name
+ * @status: status
+ */
+void dbg_event(u8 addr, const char *name, int status)
+{
+	if (name != NULL)
+		dbg_print(addr, name, status, "");
+}
+
+/*
+ * dbg_queue: prints a QUEUE event
+ * @addr:   endpoint address
+ * @req:    USB request
+ * @status: status
+ */
+void dbg_queue(u8 addr, const struct usb_request *req, int status)
+{
+	char msg[DBG_DATA_MSG];
+
+	if (req != NULL) {
+		scnprintf(msg, sizeof(msg),
+			  "%d %d", !req->no_interrupt, req->length);
+		dbg_print(addr, "QUEUE", status, msg);
+	}
+}
+
+/**
+ * dbg_setup: prints a SETUP event
+ * @addr: endpoint address
+ * @req:  setup request
+ */
+void dbg_setup(u8 addr, const struct usb_ctrlrequest *req)
+{
+	char msg[DBG_DATA_MSG];
+
+	if (req != NULL) {
+		scnprintf(msg, sizeof(msg),
+			  "%02X %02X %04X %04X %d", req->bRequestType,
+			  req->bRequest, le16_to_cpu(req->wValue),
+			  le16_to_cpu(req->wIndex), le16_to_cpu(req->wLength));
+		dbg_print(addr, "SETUP", 0, msg);
+	}
+}
+
+/**
+ * show_events: displays the event buffer
+ *
+ * Check "device.h" for details
+ */
+static ssize_t show_events(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	unsigned long flags;
+	unsigned i, j, n = 0;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(dev->parent, "[%s] EINVAL\n", __func__);
+		return 0;
+	}
+
+	read_lock_irqsave(&dbg_data.lck, flags);
+
+	i = dbg_data.idx;
+	for (dbg_dec(&i); i != dbg_data.idx; dbg_dec(&i)) {
+		n += strlen(dbg_data.buf[i]);
+		if (n >= PAGE_SIZE) {
+			n -= strlen(dbg_data.buf[i]);
+			break;
+		}
+	}
+	for (j = 0, dbg_inc(&i); j < n; dbg_inc(&i))
+		j += scnprintf(buf + j, PAGE_SIZE - j,
+			       "%s", dbg_data.buf[i]);
+
+	read_unlock_irqrestore(&dbg_data.lck, flags);
+
+	return n;
+}
+
+/**
+ * store_events: configure if events are going to be also printed to console
+ *
+ * Check "device.h" for details
+ */
+static ssize_t store_events(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	unsigned tty;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(dev, "[%s] EINVAL\n", __func__);
+		goto done;
+	}
+
+	if (sscanf(buf, "%u", &tty) != 1 || tty > 1) {
+		dev_err(dev, "<1|0>: enable|disable console log\n");
+		goto done;
+	}
+
+	dbg_data.tty = tty;
+	dev_info(dev, "tty = %u", dbg_data.tty);
+
+ done:
+	return count;
+}
+static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events);
+
+/**
+ * show_inters: interrupt status, enable status and historic
+ *
+ * Check "device.h" for details
+ */
+static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	unsigned long flags;
+	u32 intr;
+	unsigned i, j, n = 0;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		return 0;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/*n += scnprintf(buf + n, PAGE_SIZE - n,
+		       "status = %08x\n", hw_read_intr_status(udc));
+	n += scnprintf(buf + n, PAGE_SIZE - n,
+	"enable = %08x\n", hw_read_intr_enable(udc));*/
+
+	n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n",
+		       isr_statistics.test);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "? ui  = %d\n",
+		       isr_statistics.ui);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "? uei = %d\n",
+		       isr_statistics.uei);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "? pci = %d\n",
+		       isr_statistics.pci);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "? uri = %d\n",
+		       isr_statistics.uri);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "? sli = %d\n",
+		       isr_statistics.sli);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "*none = %d\n",
+		       isr_statistics.none);
+	n += scnprintf(buf + n, PAGE_SIZE - n, "*hndl = %d\n",
+		       isr_statistics.hndl.cnt);
+
+	for (i = isr_statistics.hndl.idx, j = 0; j <= ISR_MASK; j++, i++) {
+		i   &= ISR_MASK;
+		intr = isr_statistics.hndl.buf[i];
+
+		if (USBi_UI  & intr)
+			n += scnprintf(buf + n, PAGE_SIZE - n, "ui  ");
+		intr &= ~USBi_UI;
+		if (USBi_UEI & intr)
+			n += scnprintf(buf + n, PAGE_SIZE - n, "uei ");
+		intr &= ~USBi_UEI;
+		if (USBi_PCI & intr)
+			n += scnprintf(buf + n, PAGE_SIZE - n, "pci ");
+		intr &= ~USBi_PCI;
+		if (USBi_URI & intr)
+			n += scnprintf(buf + n, PAGE_SIZE - n, "uri ");
+		intr &= ~USBi_URI;
+		if (USBi_SLI & intr)
+			n += scnprintf(buf + n, PAGE_SIZE - n, "sli ");
+		intr &= ~USBi_SLI;
+		if (intr)
+			n += scnprintf(buf + n, PAGE_SIZE - n, "??? ");
+		if (isr_statistics.hndl.buf[i])
+			n += scnprintf(buf + n, PAGE_SIZE - n, "\n");
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return n;
+}
+
+/**
+ * store_inters: enable & force or disable an individual interrutps
+ *                   (to be used for test purposes only)
+ *
+ * Check "device.h" for details
+ */
+static ssize_t store_inters(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	unsigned long flags;
+	unsigned en, bit;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(udc->dev, "EINVAL\n");
+		goto done;
+	}
+
+	if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) {
+		dev_err(udc->dev, "<1|0> <bit>: enable|disable interrupt\n");
+		goto done;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (en) {
+		if (hw_intr_force(udc, bit))
+			dev_err(dev, "invalid bit number\n");
+		else
+			isr_statistics.test++;
+	} else {
+		if (hw_intr_clear(udc, bit))
+			dev_err(dev, "invalid bit number\n");
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+ done:
+	return count;
+}
+static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters);
+
+/**
+ * show_port_test: reads port test mode
+ *
+ * Check "device.h" for details
+ */
+static ssize_t show_port_test(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	unsigned long flags;
+	unsigned mode;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(udc->dev, "EINVAL\n");
+		return 0;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	mode = hw_port_test_get(udc);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode);
+}
+
+/**
+ * store_port_test: writes port test mode
+ *
+ * Check "device.h" for details
+ */
+static ssize_t store_port_test(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	unsigned long flags;
+	unsigned mode;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		goto done;
+	}
+
+	if (sscanf(buf, "%u", &mode) != 1) {
+		dev_err(udc->dev, "<mode>: set port test mode");
+		goto done;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (hw_port_test_set(udc, mode))
+		dev_err(udc->dev, "invalid mode\n");
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+ done:
+	return count;
+}
+static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR,
+		   show_port_test, store_port_test);
+
+/**
+ * show_qheads: DMA contents of all queue heads
+ *
+ * Check "device.h" for details
+ */
+static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	unsigned long flags;
+	unsigned i, j, n = 0;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		return 0;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	for (i = 0; i < udc->hw_ep_max/2; i++) {
+		struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i];
+		struct ci13xxx_ep *mEpTx =
+			&udc->ci13xxx_ep[i + udc->hw_ep_max/2];
+		n += scnprintf(buf + n, PAGE_SIZE - n,
+			       "EP=%02i: RX=%08X TX=%08X\n",
+			       i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma);
+		for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) {
+			n += scnprintf(buf + n, PAGE_SIZE - n,
+				       " %04X:    %08X    %08X\n", j,
+				       *((u32 *)mEpRx->qh.ptr + j),
+				       *((u32 *)mEpTx->qh.ptr + j));
+		}
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return n;
+}
+static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL);
+
+/**
+ * show_registers: dumps all registers
+ *
+ * Check "device.h" for details
+ */
+#define DUMP_ENTRIES	512
+static ssize_t show_registers(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	unsigned long flags;
+	u32 *dump;
+	unsigned i, k, n = 0;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		return 0;
+	}
+
+	dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL);
+	if (!dump) {
+		dev_err(udc->dev, "%s: out of memory\n", __func__);
+		return 0;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	k = hw_register_read(udc, dump, DUMP_ENTRIES);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	for (i = 0; i < k; i++) {
+		n += scnprintf(buf + n, PAGE_SIZE - n,
+			       "reg[0x%04X] = 0x%08X\n",
+			       i * (unsigned)sizeof(u32), dump[i]);
+	}
+	kfree(dump);
+
+	return n;
+}
+
+/**
+ * store_registers: writes value to register address
+ *
+ * Check "device.h" for details
+ */
+static ssize_t store_registers(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	unsigned long addr, data, flags;
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		goto done;
+	}
+
+	if (sscanf(buf, "%li %li", &addr, &data) != 2) {
+		dev_err(udc->dev,
+			"<addr> <data>: write data to register address\n");
+		goto done;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (hw_register_write(udc, addr, data))
+		dev_err(udc->dev, "invalid address range\n");
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+ done:
+	return count;
+}
+static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR,
+		   show_registers, store_registers);
+
+/**
+ * show_requests: DMA contents of all requests currently queued (all endpts)
+ *
+ * Check "device.h" for details
+ */
+static ssize_t show_requests(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	unsigned long flags;
+	struct list_head   *ptr = NULL;
+	struct ci13xxx_req *req = NULL;
+	unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32);
+
+	if (attr == NULL || buf == NULL) {
+		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		return 0;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	for (i = 0; i < udc->hw_ep_max; i++)
+		list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue)
+		{
+			req = list_entry(ptr, struct ci13xxx_req, queue);
+
+			n += scnprintf(buf + n, PAGE_SIZE - n,
+					"EP=%02i: TD=%08X %s\n",
+					i % udc->hw_ep_max/2, (u32)req->dma,
+					((i < udc->hw_ep_max/2) ? "RX" : "TX"));
+
+			for (j = 0; j < qSize; j++)
+				n += scnprintf(buf + n, PAGE_SIZE - n,
+						" %04X:    %08X\n", j,
+						*((u32 *)req->ptr + j));
+		}
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return n;
+}
+static DEVICE_ATTR(requests, S_IRUSR, show_requests, NULL);
+
+/**
+ * dbg_create_files: initializes the attribute interface
+ * @dev: device
+ *
+ * This function returns an error code
+ */
+int dbg_create_files(struct device *dev)
+{
+	int retval = 0;
+
+	if (dev == NULL)
+		return -EINVAL;
+	retval = device_create_file(dev, &dev_attr_device);
+	if (retval)
+		goto done;
+	retval = device_create_file(dev, &dev_attr_driver);
+	if (retval)
+		goto rm_device;
+	retval = device_create_file(dev, &dev_attr_events);
+	if (retval)
+		goto rm_driver;
+	retval = device_create_file(dev, &dev_attr_inters);
+	if (retval)
+		goto rm_events;
+	retval = device_create_file(dev, &dev_attr_port_test);
+	if (retval)
+		goto rm_inters;
+	retval = device_create_file(dev, &dev_attr_qheads);
+	if (retval)
+		goto rm_port_test;
+	retval = device_create_file(dev, &dev_attr_registers);
+	if (retval)
+		goto rm_qheads;
+	retval = device_create_file(dev, &dev_attr_requests);
+	if (retval)
+		goto rm_registers;
+	return 0;
+
+ rm_registers:
+	device_remove_file(dev, &dev_attr_registers);
+ rm_qheads:
+	device_remove_file(dev, &dev_attr_qheads);
+ rm_port_test:
+	device_remove_file(dev, &dev_attr_port_test);
+ rm_inters:
+	device_remove_file(dev, &dev_attr_inters);
+ rm_events:
+	device_remove_file(dev, &dev_attr_events);
+ rm_driver:
+	device_remove_file(dev, &dev_attr_driver);
+ rm_device:
+	device_remove_file(dev, &dev_attr_device);
+ done:
+	return retval;
+}
+
+/**
+ * dbg_remove_files: destroys the attribute interface
+ * @dev: device
+ *
+ * This function returns an error code
+ */
+int dbg_remove_files(struct device *dev)
+{
+	if (dev == NULL)
+		return -EINVAL;
+	device_remove_file(dev, &dev_attr_requests);
+	device_remove_file(dev, &dev_attr_registers);
+	device_remove_file(dev, &dev_attr_qheads);
+	device_remove_file(dev, &dev_attr_port_test);
+	device_remove_file(dev, &dev_attr_inters);
+	device_remove_file(dev, &dev_attr_events);
+	device_remove_file(dev, &dev_attr_driver);
+	device_remove_file(dev, &dev_attr_device);
+	return 0;
+}
diff --git a/drivers/usb/chipidea/debug.h b/drivers/usb/chipidea/debug.h
new file mode 100644
index 000000000000..80d96865775c
--- /dev/null
+++ b/drivers/usb/chipidea/debug.h
@@ -0,0 +1,56 @@
+/*
+ * debug.h - ChipIdea USB driver debug interfaces
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVERS_USB_CHIPIDEA_DEBUG_H
+#define __DRIVERS_USB_CHIPIDEA_DEBUG_H
+
+#ifdef CONFIG_USB_CHIPIDEA_DEBUG
+void dbg_interrupt(u32 intmask);
+void dbg_done(u8 addr, const u32 token, int status);
+void dbg_event(u8 addr, const char *name, int status);
+void dbg_queue(u8 addr, const struct usb_request *req, int status);
+void dbg_setup(u8 addr, const struct usb_ctrlrequest *req);
+int dbg_create_files(struct device *dev);
+int dbg_remove_files(struct device *dev);
+#else
+static inline void dbg_interrupt(u32 intmask)
+{
+}
+
+static inline void dbg_done(u8 addr, const u32 token, int status)
+{
+}
+
+static inline void dbg_event(u8 addr, const char *name, int status)
+{
+}
+
+static inline void dbg_queue(u8 addr, const struct usb_request *req, int status)
+{
+}
+
+static inline void dbg_setup(u8 addr, const struct usb_ctrlrequest *req)
+{
+}
+
+static inline int dbg_create_files(struct device *dev)
+{
+	return 0;
+}
+
+static inline int dbg_remove_files(struct device *dev)
+{
+	return 0;
+}
+#endif
+
+#endif /* __DRIVERS_USB_CHIPIDEA_DEBUG_H */
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
new file mode 100644
index 000000000000..9eacd21c0cd9
--- /dev/null
+++ b/drivers/usb/chipidea/host.c
@@ -0,0 +1,160 @@
+/*
+ * host.c - ChipIdea USB host controller driver
+ *
+ * Copyright (c) 2012 Intel Corporation
+ *
+ * Author: Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/chipidea.h>
+
+#define CHIPIDEA_EHCI
+#include "../host/ehci-hcd.c"
+
+#include "ci.h"
+#include "bits.h"
+#include "host.h"
+
+static int ci_ehci_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int ret;
+
+	hcd->has_tt = 1;
+
+	ret = ehci_setup(hcd);
+	if (ret)
+		return ret;
+
+	ehci_port_power(ehci, 0);
+
+	return ret;
+}
+
+static const struct hc_driver ci_ehci_hc_driver = {
+	.description	= "ehci_hcd",
+	.product_desc	= "ChipIdea HDRC EHCI",
+	.hcd_priv_size	= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq	= ehci_irq,
+	.flags	= HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset		= ci_ehci_setup,
+	.start		= ehci_run,
+	.stop		= ehci_stop,
+	.shutdown	= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number = ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static irqreturn_t host_irq(struct ci13xxx *ci)
+{
+	return usb_hcd_irq(ci->irq, ci->hcd);
+}
+
+static int host_start(struct ci13xxx *ci)
+{
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	dev_set_drvdata(ci->dev, ci);
+	hcd->rsrc_start = ci->hw_bank.phys;
+	hcd->rsrc_len = ci->hw_bank.size;
+	hcd->regs = ci->hw_bank.abs;
+	hcd->has_tt = 1;
+
+	hcd->power_budget = ci->udc_driver->power_budget;
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = ci->hw_bank.cap;
+	ehci->has_hostpc = ci->hw_bank.lpm;
+
+	ret = usb_add_hcd(hcd, 0, 0);
+	if (ret)
+		usb_put_hcd(hcd);
+	else
+		ci->hcd = hcd;
+
+	return ret;
+}
+
+static void host_stop(struct ci13xxx *ci)
+{
+	struct usb_hcd *hcd = ci->hcd;
+
+	usb_remove_hcd(hcd);
+	usb_put_hcd(hcd);
+}
+
+int ci_hdrc_host_init(struct ci13xxx *ci)
+{
+	struct ci_role_driver *rdrv;
+
+	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC))
+		return -ENXIO;
+
+	rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= host_start;
+	rdrv->stop	= host_stop;
+	rdrv->irq	= host_irq;
+	rdrv->name	= "host";
+	ci->roles[CI_ROLE_HOST] = rdrv;
+
+	return 0;
+}
diff --git a/drivers/usb/chipidea/host.h b/drivers/usb/chipidea/host.h
new file mode 100644
index 000000000000..761fb1fd6d99
--- /dev/null
+++ b/drivers/usb/chipidea/host.h
@@ -0,0 +1,17 @@
+#ifndef __DRIVERS_USB_CHIPIDEA_HOST_H
+#define __DRIVERS_USB_CHIPIDEA_HOST_H
+
+#ifdef CONFIG_USB_CHIPIDEA_HOST
+
+int ci_hdrc_host_init(struct ci13xxx *ci);
+
+#else
+
+static inline int ci_hdrc_host_init(struct ci13xxx *ci)
+{
+	return -ENXIO;
+}
+
+#endif
+
+#endif /* __DRIVERS_USB_CHIPIDEA_HOST_H */
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
new file mode 100644
index 000000000000..51f96942dc5e
--- /dev/null
+++ b/drivers/usb/chipidea/udc.c
@@ -0,0 +1,1809 @@
+/*
+ * udc.c - ChipIdea UDC driver
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/chipidea.h>
+
+#include "ci.h"
+#include "udc.h"
+#include "bits.h"
+#include "debug.h"
+
+/* control endpoint description */
+static const struct usb_endpoint_descriptor
+ctrl_endpt_out_desc = {
+	.bLength         = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_OUT,
+	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
+};
+
+static const struct usb_endpoint_descriptor
+ctrl_endpt_in_desc = {
+	.bLength         = USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType = USB_DT_ENDPOINT,
+
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
+};
+
+/**
+ * hw_ep_bit: calculates the bit number
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns bit number
+ */
+static inline int hw_ep_bit(int num, int dir)
+{
+	return num + (dir ? 16 : 0);
+}
+
+static inline int ep_to_bit(struct ci13xxx *udc, int n)
+{
+	int fill = 16 - udc->hw_ep_max / 2;
+
+	if (n >= udc->hw_ep_max / 2)
+		n += fill;
+
+	return n;
+}
+
+/**
+ * hw_device_state: enables/disables interrupts & starts/stops device (execute
+ *                  without interruption)
+ * @dma: 0 => disable, !0 => enable and set dma engine
+ *
+ * This function returns an error code
+ */
+static int hw_device_state(struct ci13xxx *udc, u32 dma)
+{
+	if (dma) {
+		hw_write(udc, OP_ENDPTLISTADDR, ~0, dma);
+		/* interrupt, error, port change, reset, sleep/suspend */
+		hw_write(udc, OP_USBINTR, ~0,
+			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
+		hw_write(udc, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+	} else {
+		hw_write(udc, OP_USBCMD, USBCMD_RS, 0);
+		hw_write(udc, OP_USBINTR, ~0, 0);
+	}
+	return 0;
+}
+
+/**
+ * hw_ep_flush: flush endpoint fifo (execute without interruption)
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns an error code
+ */
+static int hw_ep_flush(struct ci13xxx *udc, int num, int dir)
+{
+	int n = hw_ep_bit(num, dir);
+
+	do {
+		/* flush any pending transfer */
+		hw_write(udc, OP_ENDPTFLUSH, BIT(n), BIT(n));
+		while (hw_read(udc, OP_ENDPTFLUSH, BIT(n)))
+			cpu_relax();
+	} while (hw_read(udc, OP_ENDPTSTAT, BIT(n)));
+
+	return 0;
+}
+
+/**
+ * hw_ep_disable: disables endpoint (execute without interruption)
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns an error code
+ */
+static int hw_ep_disable(struct ci13xxx *udc, int num, int dir)
+{
+	hw_ep_flush(udc, num, dir);
+	hw_write(udc, OP_ENDPTCTRL + num,
+		 dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
+	return 0;
+}
+
+/**
+ * hw_ep_enable: enables endpoint (execute without interruption)
+ * @num:  endpoint number
+ * @dir:  endpoint direction
+ * @type: endpoint type
+ *
+ * This function returns an error code
+ */
+static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type)
+{
+	u32 mask, data;
+
+	if (dir) {
+		mask  = ENDPTCTRL_TXT;  /* type    */
+		data  = type << ffs_nr(mask);
+
+		mask |= ENDPTCTRL_TXS;  /* unstall */
+		mask |= ENDPTCTRL_TXR;  /* reset data toggle */
+		data |= ENDPTCTRL_TXR;
+		mask |= ENDPTCTRL_TXE;  /* enable  */
+		data |= ENDPTCTRL_TXE;
+	} else {
+		mask  = ENDPTCTRL_RXT;  /* type    */
+		data  = type << ffs_nr(mask);
+
+		mask |= ENDPTCTRL_RXS;  /* unstall */
+		mask |= ENDPTCTRL_RXR;  /* reset data toggle */
+		data |= ENDPTCTRL_RXR;
+		mask |= ENDPTCTRL_RXE;  /* enable  */
+		data |= ENDPTCTRL_RXE;
+	}
+	hw_write(udc, OP_ENDPTCTRL + num, mask, data);
+	return 0;
+}
+
+/**
+ * hw_ep_get_halt: return endpoint halt status
+ * @num: endpoint number
+ * @dir: endpoint direction
+ *
+ * This function returns 1 if endpoint halted
+ */
+static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir)
+{
+	u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
+
+	return hw_read(udc, OP_ENDPTCTRL + num, mask) ? 1 : 0;
+}
+
+/**
+ * hw_test_and_clear_setup_status: test & clear setup status (execute without
+ *                                 interruption)
+ * @n: endpoint number
+ *
+ * This function returns setup status
+ */
+static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n)
+{
+	n = ep_to_bit(udc, n);
+	return hw_test_and_clear(udc, OP_ENDPTSETUPSTAT, BIT(n));
+}
+
+/**
+ * hw_ep_prime: primes endpoint (execute without interruption)
+ * @num:     endpoint number
+ * @dir:     endpoint direction
+ * @is_ctrl: true if control endpoint
+ *
+ * This function returns an error code
+ */
+static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl)
+{
+	int n = hw_ep_bit(num, dir);
+
+	if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num)))
+		return -EAGAIN;
+
+	hw_write(udc, OP_ENDPTPRIME, BIT(n), BIT(n));
+
+	while (hw_read(udc, OP_ENDPTPRIME, BIT(n)))
+		cpu_relax();
+	if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num)))
+		return -EAGAIN;
+
+	/* status shoult be tested according with manual but it doesn't work */
+	return 0;
+}
+
+/**
+ * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
+ *                 without interruption)
+ * @num:   endpoint number
+ * @dir:   endpoint direction
+ * @value: true => stall, false => unstall
+ *
+ * This function returns an error code
+ */
+static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value)
+{
+	if (value != 0 && value != 1)
+		return -EINVAL;
+
+	do {
+		enum ci13xxx_regs reg = OP_ENDPTCTRL + num;
+		u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
+		u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
+
+		/* data toggle - reserved for EP0 but it's in ESS */
+		hw_write(udc, reg, mask_xs|mask_xr,
+			  value ? mask_xs : mask_xr);
+	} while (value != hw_ep_get_halt(udc, num, dir));
+
+	return 0;
+}
+
+/**
+ * hw_is_port_high_speed: test if port is high speed
+ *
+ * This function returns true if high speed port
+ */
+static int hw_port_is_high_speed(struct ci13xxx *udc)
+{
+	return udc->hw_bank.lpm ? hw_read(udc, OP_DEVLC, DEVLC_PSPD) :
+		hw_read(udc, OP_PORTSC, PORTSC_HSP);
+}
+
+/**
+ * hw_read_intr_enable: returns interrupt enable register
+ *
+ * This function returns register data
+ */
+static u32 hw_read_intr_enable(struct ci13xxx *udc)
+{
+	return hw_read(udc, OP_USBINTR, ~0);
+}
+
+/**
+ * hw_read_intr_status: returns interrupt status register
+ *
+ * This function returns register data
+ */
+static u32 hw_read_intr_status(struct ci13xxx *udc)
+{
+	return hw_read(udc, OP_USBSTS, ~0);
+}
+
+/**
+ * hw_test_and_clear_complete: test & clear complete status (execute without
+ *                             interruption)
+ * @n: endpoint number
+ *
+ * This function returns complete status
+ */
+static int hw_test_and_clear_complete(struct ci13xxx *udc, int n)
+{
+	n = ep_to_bit(udc, n);
+	return hw_test_and_clear(udc, OP_ENDPTCOMPLETE, BIT(n));
+}
+
+/**
+ * hw_test_and_clear_intr_active: test & clear active interrupts (execute
+ *                                without interruption)
+ *
+ * This function returns active interrutps
+ */
+static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc)
+{
+	u32 reg = hw_read_intr_status(udc) & hw_read_intr_enable(udc);
+
+	hw_write(udc, OP_USBSTS, ~0, reg);
+	return reg;
+}
+
+/**
+ * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
+ *                                interruption)
+ *
+ * This function returns guard value
+ */
+static int hw_test_and_clear_setup_guard(struct ci13xxx *udc)
+{
+	return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, 0);
+}
+
+/**
+ * hw_test_and_set_setup_guard: test & set setup guard (execute without
+ *                              interruption)
+ *
+ * This function returns guard value
+ */
+static int hw_test_and_set_setup_guard(struct ci13xxx *udc)
+{
+	return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
+}
+
+/**
+ * hw_usb_set_address: configures USB address (execute without interruption)
+ * @value: new USB address
+ *
+ * This function explicitly sets the address, without the "USBADRA" (advance)
+ * feature, which is not supported by older versions of the controller.
+ */
+static void hw_usb_set_address(struct ci13xxx *udc, u8 value)
+{
+	hw_write(udc, OP_DEVICEADDR, DEVICEADDR_USBADR,
+		 value << ffs_nr(DEVICEADDR_USBADR));
+}
+
+/**
+ * hw_usb_reset: restart device after a bus reset (execute without
+ *               interruption)
+ *
+ * This function returns an error code
+ */
+static int hw_usb_reset(struct ci13xxx *udc)
+{
+	hw_usb_set_address(udc, 0);
+
+	/* ESS flushes only at end?!? */
+	hw_write(udc, OP_ENDPTFLUSH,    ~0, ~0);
+
+	/* clear setup token semaphores */
+	hw_write(udc, OP_ENDPTSETUPSTAT, 0,  0);
+
+	/* clear complete status */
+	hw_write(udc, OP_ENDPTCOMPLETE,  0,  0);
+
+	/* wait until all bits cleared */
+	while (hw_read(udc, OP_ENDPTPRIME, ~0))
+		udelay(10);             /* not RTOS friendly */
+
+	/* reset all endpoints ? */
+
+	/* reset internal status and wait for further instructions
+	   no need to verify the port reset status (ESS does it) */
+
+	return 0;
+}
+
+/******************************************************************************
+ * UTIL block
+ *****************************************************************************/
+/**
+ * _usb_addr: calculates endpoint address from direction & number
+ * @ep:  endpoint
+ */
+static inline u8 _usb_addr(struct ci13xxx_ep *ep)
+{
+	return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
+}
+
+/**
+ * _hardware_queue: configures a request at hardware level
+ * @gadget: gadget
+ * @mEp:    endpoint
+ *
+ * This function returns an error code
+ */
+static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
+{
+	struct ci13xxx *udc = mEp->udc;
+	unsigned i;
+	int ret = 0;
+	unsigned length = mReq->req.length;
+
+	/* don't queue twice */
+	if (mReq->req.status == -EALREADY)
+		return -EALREADY;
+
+	mReq->req.status = -EALREADY;
+
+	if (mReq->req.zero && length && (length % mEp->ep.maxpacket == 0)) {
+		mReq->zptr = dma_pool_alloc(mEp->td_pool, GFP_ATOMIC,
+					   &mReq->zdma);
+		if (mReq->zptr == NULL)
+			return -ENOMEM;
+
+		memset(mReq->zptr, 0, sizeof(*mReq->zptr));
+		mReq->zptr->next    = TD_TERMINATE;
+		mReq->zptr->token   = TD_STATUS_ACTIVE;
+		if (!mReq->req.no_interrupt)
+			mReq->zptr->token   |= TD_IOC;
+	}
+	ret = usb_gadget_map_request(&udc->gadget, &mReq->req, mEp->dir);
+	if (ret)
+		return ret;
+
+	/*
+	 * TD configuration
+	 * TODO - handle requests which spawns into several TDs
+	 */
+	memset(mReq->ptr, 0, sizeof(*mReq->ptr));
+	mReq->ptr->token    = length << ffs_nr(TD_TOTAL_BYTES);
+	mReq->ptr->token   &= TD_TOTAL_BYTES;
+	mReq->ptr->token   |= TD_STATUS_ACTIVE;
+	if (mReq->zptr) {
+		mReq->ptr->next    = mReq->zdma;
+	} else {
+		mReq->ptr->next    = TD_TERMINATE;
+		if (!mReq->req.no_interrupt)
+			mReq->ptr->token  |= TD_IOC;
+	}
+	mReq->ptr->page[0]  = mReq->req.dma;
+	for (i = 1; i < 5; i++)
+		mReq->ptr->page[i] =
+			(mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK;
+
+	if (!list_empty(&mEp->qh.queue)) {
+		struct ci13xxx_req *mReqPrev;
+		int n = hw_ep_bit(mEp->num, mEp->dir);
+		int tmp_stat;
+
+		mReqPrev = list_entry(mEp->qh.queue.prev,
+				struct ci13xxx_req, queue);
+		if (mReqPrev->zptr)
+			mReqPrev->zptr->next = mReq->dma & TD_ADDR_MASK;
+		else
+			mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK;
+		wmb();
+		if (hw_read(udc, OP_ENDPTPRIME, BIT(n)))
+			goto done;
+		do {
+			hw_write(udc, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
+			tmp_stat = hw_read(udc, OP_ENDPTSTAT, BIT(n));
+		} while (!hw_read(udc, OP_USBCMD, USBCMD_ATDTW));
+		hw_write(udc, OP_USBCMD, USBCMD_ATDTW, 0);
+		if (tmp_stat)
+			goto done;
+	}
+
+	/*  QH configuration */
+	mEp->qh.ptr->td.next   = mReq->dma;    /* TERMINATE = 0 */
+	mEp->qh.ptr->td.token &= ~TD_STATUS;   /* clear status */
+	mEp->qh.ptr->cap |=  QH_ZLT;
+
+	wmb();   /* synchronize before ep prime */
+
+	ret = hw_ep_prime(udc, mEp->num, mEp->dir,
+			   mEp->type == USB_ENDPOINT_XFER_CONTROL);
+done:
+	return ret;
+}
+
+/**
+ * _hardware_dequeue: handles a request at hardware level
+ * @gadget: gadget
+ * @mEp:    endpoint
+ *
+ * This function returns an error code
+ */
+static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
+{
+	if (mReq->req.status != -EALREADY)
+		return -EINVAL;
+
+	if ((TD_STATUS_ACTIVE & mReq->ptr->token) != 0)
+		return -EBUSY;
+
+	if (mReq->zptr) {
+		if ((TD_STATUS_ACTIVE & mReq->zptr->token) != 0)
+			return -EBUSY;
+		dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma);
+		mReq->zptr = NULL;
+	}
+
+	mReq->req.status = 0;
+
+	usb_gadget_unmap_request(&mEp->udc->gadget, &mReq->req, mEp->dir);
+
+	mReq->req.status = mReq->ptr->token & TD_STATUS;
+	if ((TD_STATUS_HALTED & mReq->req.status) != 0)
+		mReq->req.status = -1;
+	else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0)
+		mReq->req.status = -1;
+	else if ((TD_STATUS_TR_ERR & mReq->req.status) != 0)
+		mReq->req.status = -1;
+
+	mReq->req.actual   = mReq->ptr->token & TD_TOTAL_BYTES;
+	mReq->req.actual >>= ffs_nr(TD_TOTAL_BYTES);
+	mReq->req.actual   = mReq->req.length - mReq->req.actual;
+	mReq->req.actual   = mReq->req.status ? 0 : mReq->req.actual;
+
+	return mReq->req.actual;
+}
+
+/**
+ * _ep_nuke: dequeues all endpoint requests
+ * @mEp: endpoint
+ *
+ * This function returns an error code
+ * Caller must hold lock
+ */
+static int _ep_nuke(struct ci13xxx_ep *mEp)
+__releases(mEp->lock)
+__acquires(mEp->lock)
+{
+	if (mEp == NULL)
+		return -EINVAL;
+
+	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+
+	while (!list_empty(&mEp->qh.queue)) {
+
+		/* pop oldest request */
+		struct ci13xxx_req *mReq = \
+			list_entry(mEp->qh.queue.next,
+				   struct ci13xxx_req, queue);
+		list_del_init(&mReq->queue);
+		mReq->req.status = -ESHUTDOWN;
+
+		if (mReq->req.complete != NULL) {
+			spin_unlock(mEp->lock);
+			mReq->req.complete(&mEp->ep, &mReq->req);
+			spin_lock(mEp->lock);
+		}
+	}
+	return 0;
+}
+
+/**
+ * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
+ * @gadget: gadget
+ *
+ * This function returns an error code
+ */
+static int _gadget_stop_activity(struct usb_gadget *gadget)
+{
+	struct usb_ep *ep;
+	struct ci13xxx    *udc = container_of(gadget, struct ci13xxx, gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->remote_wakeup = 0;
+	udc->suspended = 0;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	/* flush all endpoints */
+	gadget_for_each_ep(ep, gadget) {
+		usb_ep_fifo_flush(ep);
+	}
+	usb_ep_fifo_flush(&udc->ep0out->ep);
+	usb_ep_fifo_flush(&udc->ep0in->ep);
+
+	if (udc->driver)
+		udc->driver->disconnect(gadget);
+
+	/* make sure to disable all endpoints */
+	gadget_for_each_ep(ep, gadget) {
+		usb_ep_disable(ep);
+	}
+
+	if (udc->status != NULL) {
+		usb_ep_free_request(&udc->ep0in->ep, udc->status);
+		udc->status = NULL;
+	}
+
+	return 0;
+}
+
+/******************************************************************************
+ * ISR block
+ *****************************************************************************/
+/**
+ * isr_reset_handler: USB reset interrupt handler
+ * @udc: UDC device
+ *
+ * This function resets USB engine after a bus reset occurred
+ */
+static void isr_reset_handler(struct ci13xxx *udc)
+__releases(udc->lock)
+__acquires(udc->lock)
+{
+	int retval;
+
+	dbg_event(0xFF, "BUS RST", 0);
+
+	spin_unlock(&udc->lock);
+	retval = _gadget_stop_activity(&udc->gadget);
+	if (retval)
+		goto done;
+
+	retval = hw_usb_reset(udc);
+	if (retval)
+		goto done;
+
+	udc->status = usb_ep_alloc_request(&udc->ep0in->ep, GFP_ATOMIC);
+	if (udc->status == NULL)
+		retval = -ENOMEM;
+
+done:
+	spin_lock(&udc->lock);
+
+	if (retval)
+		dev_err(udc->dev, "error: %i\n", retval);
+}
+
+/**
+ * isr_get_status_complete: get_status request complete function
+ * @ep:  endpoint
+ * @req: request handled
+ *
+ * Caller must release lock
+ */
+static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	if (ep == NULL || req == NULL)
+		return;
+
+	kfree(req->buf);
+	usb_ep_free_request(ep, req);
+}
+
+/**
+ * isr_get_status_response: get_status request response
+ * @udc: udc struct
+ * @setup: setup request packet
+ *
+ * This function returns an error code
+ */
+static int isr_get_status_response(struct ci13xxx *udc,
+				   struct usb_ctrlrequest *setup)
+__releases(mEp->lock)
+__acquires(mEp->lock)
+{
+	struct ci13xxx_ep *mEp = udc->ep0in;
+	struct usb_request *req = NULL;
+	gfp_t gfp_flags = GFP_ATOMIC;
+	int dir, num, retval;
+
+	if (mEp == NULL || setup == NULL)
+		return -EINVAL;
+
+	spin_unlock(mEp->lock);
+	req = usb_ep_alloc_request(&mEp->ep, gfp_flags);
+	spin_lock(mEp->lock);
+	if (req == NULL)
+		return -ENOMEM;
+
+	req->complete = isr_get_status_complete;
+	req->length   = 2;
+	req->buf      = kzalloc(req->length, gfp_flags);
+	if (req->buf == NULL) {
+		retval = -ENOMEM;
+		goto err_free_req;
+	}
+
+	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+		/* Assume that device is bus powered for now. */
+		*(u16 *)req->buf = udc->remote_wakeup << 1;
+		retval = 0;
+	} else if ((setup->bRequestType & USB_RECIP_MASK) \
+		   == USB_RECIP_ENDPOINT) {
+		dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
+			TX : RX;
+		num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+		*(u16 *)req->buf = hw_ep_get_halt(udc, num, dir);
+	}
+	/* else do nothing; reserved for future use */
+
+	spin_unlock(mEp->lock);
+	retval = usb_ep_queue(&mEp->ep, req, gfp_flags);
+	spin_lock(mEp->lock);
+	if (retval)
+		goto err_free_buf;
+
+	return 0;
+
+ err_free_buf:
+	kfree(req->buf);
+ err_free_req:
+	spin_unlock(mEp->lock);
+	usb_ep_free_request(&mEp->ep, req);
+	spin_lock(mEp->lock);
+	return retval;
+}
+
+/**
+ * isr_setup_status_complete: setup_status request complete function
+ * @ep:  endpoint
+ * @req: request handled
+ *
+ * Caller must release lock. Put the port in test mode if test mode
+ * feature is selected.
+ */
+static void
+isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct ci13xxx *udc = req->context;
+	unsigned long flags;
+
+	if (udc->setaddr) {
+		hw_usb_set_address(udc, udc->address);
+		udc->setaddr = false;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (udc->test_mode)
+		hw_port_test_set(udc, udc->test_mode);
+	spin_unlock_irqrestore(&udc->lock, flags);
+}
+
+/**
+ * isr_setup_status_phase: queues the status phase of a setup transation
+ * @udc: udc struct
+ *
+ * This function returns an error code
+ */
+static int isr_setup_status_phase(struct ci13xxx *udc)
+__releases(mEp->lock)
+__acquires(mEp->lock)
+{
+	int retval;
+	struct ci13xxx_ep *mEp;
+
+	mEp = (udc->ep0_dir == TX) ? udc->ep0out : udc->ep0in;
+	udc->status->context = udc;
+	udc->status->complete = isr_setup_status_complete;
+
+	spin_unlock(mEp->lock);
+	retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC);
+	spin_lock(mEp->lock);
+
+	return retval;
+}
+
+/**
+ * isr_tr_complete_low: transaction complete low level handler
+ * @mEp: endpoint
+ *
+ * This function returns an error code
+ * Caller must hold lock
+ */
+static int isr_tr_complete_low(struct ci13xxx_ep *mEp)
+__releases(mEp->lock)
+__acquires(mEp->lock)
+{
+	struct ci13xxx_req *mReq, *mReqTemp;
+	struct ci13xxx_ep *mEpTemp = mEp;
+	int uninitialized_var(retval);
+
+	if (list_empty(&mEp->qh.queue))
+		return -EINVAL;
+
+	list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue,
+			queue) {
+		retval = _hardware_dequeue(mEp, mReq);
+		if (retval < 0)
+			break;
+		list_del_init(&mReq->queue);
+		dbg_done(_usb_addr(mEp), mReq->ptr->token, retval);
+		if (mReq->req.complete != NULL) {
+			spin_unlock(mEp->lock);
+			if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) &&
+					mReq->req.length)
+				mEpTemp = mEp->udc->ep0in;
+			mReq->req.complete(&mEpTemp->ep, &mReq->req);
+			spin_lock(mEp->lock);
+		}
+	}
+
+	if (retval == -EBUSY)
+		retval = 0;
+	if (retval < 0)
+		dbg_event(_usb_addr(mEp), "DONE", retval);
+
+	return retval;
+}
+
+/**
+ * isr_tr_complete_handler: transaction complete interrupt handler
+ * @udc: UDC descriptor
+ *
+ * This function handles traffic events
+ */
+static void isr_tr_complete_handler(struct ci13xxx *udc)
+__releases(udc->lock)
+__acquires(udc->lock)
+{
+	unsigned i;
+	u8 tmode = 0;
+
+	for (i = 0; i < udc->hw_ep_max; i++) {
+		struct ci13xxx_ep *mEp  = &udc->ci13xxx_ep[i];
+		int type, num, dir, err = -EINVAL;
+		struct usb_ctrlrequest req;
+
+		if (mEp->ep.desc == NULL)
+			continue;   /* not configured */
+
+		if (hw_test_and_clear_complete(udc, i)) {
+			err = isr_tr_complete_low(mEp);
+			if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
+				if (err > 0)   /* needs status phase */
+					err = isr_setup_status_phase(udc);
+				if (err < 0) {
+					dbg_event(_usb_addr(mEp),
+						  "ERROR", err);
+					spin_unlock(&udc->lock);
+					if (usb_ep_set_halt(&mEp->ep))
+						dev_err(udc->dev,
+							"error: ep_set_halt\n");
+					spin_lock(&udc->lock);
+				}
+			}
+		}
+
+		if (mEp->type != USB_ENDPOINT_XFER_CONTROL ||
+		    !hw_test_and_clear_setup_status(udc, i))
+			continue;
+
+		if (i != 0) {
+			dev_warn(udc->dev, "ctrl traffic at endpoint %d\n", i);
+			continue;
+		}
+
+		/*
+		 * Flush data and handshake transactions of previous
+		 * setup packet.
+		 */
+		_ep_nuke(udc->ep0out);
+		_ep_nuke(udc->ep0in);
+
+		/* read_setup_packet */
+		do {
+			hw_test_and_set_setup_guard(udc);
+			memcpy(&req, &mEp->qh.ptr->setup, sizeof(req));
+		} while (!hw_test_and_clear_setup_guard(udc));
+
+		type = req.bRequestType;
+
+		udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
+
+		dbg_setup(_usb_addr(mEp), &req);
+
+		switch (req.bRequest) {
+		case USB_REQ_CLEAR_FEATURE:
+			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
+					le16_to_cpu(req.wValue) ==
+					USB_ENDPOINT_HALT) {
+				if (req.wLength != 0)
+					break;
+				num  = le16_to_cpu(req.wIndex);
+				dir = num & USB_ENDPOINT_DIR_MASK;
+				num &= USB_ENDPOINT_NUMBER_MASK;
+				if (dir) /* TX */
+					num += udc->hw_ep_max/2;
+				if (!udc->ci13xxx_ep[num].wedge) {
+					spin_unlock(&udc->lock);
+					err = usb_ep_clear_halt(
+						&udc->ci13xxx_ep[num].ep);
+					spin_lock(&udc->lock);
+					if (err)
+						break;
+				}
+				err = isr_setup_status_phase(udc);
+			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
+					le16_to_cpu(req.wValue) ==
+					USB_DEVICE_REMOTE_WAKEUP) {
+				if (req.wLength != 0)
+					break;
+				udc->remote_wakeup = 0;
+				err = isr_setup_status_phase(udc);
+			} else {
+				goto delegate;
+			}
+			break;
+		case USB_REQ_GET_STATUS:
+			if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   &&
+			    type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
+			    type != (USB_DIR_IN|USB_RECIP_INTERFACE))
+				goto delegate;
+			if (le16_to_cpu(req.wLength) != 2 ||
+			    le16_to_cpu(req.wValue)  != 0)
+				break;
+			err = isr_get_status_response(udc, &req);
+			break;
+		case USB_REQ_SET_ADDRESS:
+			if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
+				goto delegate;
+			if (le16_to_cpu(req.wLength) != 0 ||
+			    le16_to_cpu(req.wIndex)  != 0)
+				break;
+			udc->address = (u8)le16_to_cpu(req.wValue);
+			udc->setaddr = true;
+			err = isr_setup_status_phase(udc);
+			break;
+		case USB_REQ_SET_FEATURE:
+			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
+					le16_to_cpu(req.wValue) ==
+					USB_ENDPOINT_HALT) {
+				if (req.wLength != 0)
+					break;
+				num  = le16_to_cpu(req.wIndex);
+				dir = num & USB_ENDPOINT_DIR_MASK;
+				num &= USB_ENDPOINT_NUMBER_MASK;
+				if (dir) /* TX */
+					num += udc->hw_ep_max/2;
+
+				spin_unlock(&udc->lock);
+				err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep);
+				spin_lock(&udc->lock);
+				if (!err)
+					isr_setup_status_phase(udc);
+			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
+				if (req.wLength != 0)
+					break;
+				switch (le16_to_cpu(req.wValue)) {
+				case USB_DEVICE_REMOTE_WAKEUP:
+					udc->remote_wakeup = 1;
+					err = isr_setup_status_phase(udc);
+					break;
+				case USB_DEVICE_TEST_MODE:
+					tmode = le16_to_cpu(req.wIndex) >> 8;
+					switch (tmode) {
+					case TEST_J:
+					case TEST_K:
+					case TEST_SE0_NAK:
+					case TEST_PACKET:
+					case TEST_FORCE_EN:
+						udc->test_mode = tmode;
+						err = isr_setup_status_phase(
+								udc);
+						break;
+					default:
+						break;
+					}
+				default:
+					goto delegate;
+				}
+			} else {
+				goto delegate;
+			}
+			break;
+		default:
+delegate:
+			if (req.wLength == 0)   /* no data phase */
+				udc->ep0_dir = TX;
+
+			spin_unlock(&udc->lock);
+			err = udc->driver->setup(&udc->gadget, &req);
+			spin_lock(&udc->lock);
+			break;
+		}
+
+		if (err < 0) {
+			dbg_event(_usb_addr(mEp), "ERROR", err);
+
+			spin_unlock(&udc->lock);
+			if (usb_ep_set_halt(&mEp->ep))
+				dev_err(udc->dev, "error: ep_set_halt\n");
+			spin_lock(&udc->lock);
+		}
+	}
+}
+
+/******************************************************************************
+ * ENDPT block
+ *****************************************************************************/
+/**
+ * ep_enable: configure endpoint, making it usable
+ *
+ * Check usb_ep_enable() at "usb_gadget.h" for details
+ */
+static int ep_enable(struct usb_ep *ep,
+		     const struct usb_endpoint_descriptor *desc)
+{
+	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+	int retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL || desc == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(mEp->lock, flags);
+
+	/* only internal SW should enable ctrl endpts */
+
+	mEp->ep.desc = desc;
+
+	if (!list_empty(&mEp->qh.queue))
+		dev_warn(mEp->udc->dev, "enabling a non-empty endpoint!\n");
+
+	mEp->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
+	mEp->num  = usb_endpoint_num(desc);
+	mEp->type = usb_endpoint_type(desc);
+
+	mEp->ep.maxpacket = usb_endpoint_maxp(desc);
+
+	dbg_event(_usb_addr(mEp), "ENABLE", 0);
+
+	mEp->qh.ptr->cap = 0;
+
+	if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
+		mEp->qh.ptr->cap |=  QH_IOS;
+	else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
+		mEp->qh.ptr->cap &= ~QH_MULT;
+	else
+		mEp->qh.ptr->cap &= ~QH_ZLT;
+
+	mEp->qh.ptr->cap |=
+		(mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT;
+	mEp->qh.ptr->td.next |= TD_TERMINATE;   /* needed? */
+
+	/*
+	 * Enable endpoints in the HW other than ep0 as ep0
+	 * is always enabled
+	 */
+	if (mEp->num)
+		retval |= hw_ep_enable(mEp->udc, mEp->num, mEp->dir, mEp->type);
+
+	spin_unlock_irqrestore(mEp->lock, flags);
+	return retval;
+}
+
+/**
+ * ep_disable: endpoint is no longer usable
+ *
+ * Check usb_ep_disable() at "usb_gadget.h" for details
+ */
+static int ep_disable(struct usb_ep *ep)
+{
+	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+	int direction, retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL)
+		return -EINVAL;
+	else if (mEp->ep.desc == NULL)
+		return -EBUSY;
+
+	spin_lock_irqsave(mEp->lock, flags);
+
+	/* only internal SW should disable ctrl endpts */
+
+	direction = mEp->dir;
+	do {
+		dbg_event(_usb_addr(mEp), "DISABLE", 0);
+
+		retval |= _ep_nuke(mEp);
+		retval |= hw_ep_disable(mEp->udc, mEp->num, mEp->dir);
+
+		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
+			mEp->dir = (mEp->dir == TX) ? RX : TX;
+
+	} while (mEp->dir != direction);
+
+	mEp->ep.desc = NULL;
+
+	spin_unlock_irqrestore(mEp->lock, flags);
+	return retval;
+}
+
+/**
+ * ep_alloc_request: allocate a request object to use with this endpoint
+ *
+ * Check usb_ep_alloc_request() at "usb_gadget.h" for details
+ */
+static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct ci13xxx_ep  *mEp  = container_of(ep, struct ci13xxx_ep, ep);
+	struct ci13xxx_req *mReq = NULL;
+
+	if (ep == NULL)
+		return NULL;
+
+	mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
+	if (mReq != NULL) {
+		INIT_LIST_HEAD(&mReq->queue);
+
+		mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags,
+					   &mReq->dma);
+		if (mReq->ptr == NULL) {
+			kfree(mReq);
+			mReq = NULL;
+		}
+	}
+
+	dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL);
+
+	return (mReq == NULL) ? NULL : &mReq->req;
+}
+
+/**
+ * ep_free_request: frees a request object
+ *
+ * Check usb_ep_free_request() at "usb_gadget.h" for details
+ */
+static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+	struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
+	struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
+	unsigned long flags;
+
+	if (ep == NULL || req == NULL) {
+		return;
+	} else if (!list_empty(&mReq->queue)) {
+		dev_err(mEp->udc->dev, "freeing queued request\n");
+		return;
+	}
+
+	spin_lock_irqsave(mEp->lock, flags);
+
+	if (mReq->ptr)
+		dma_pool_free(mEp->td_pool, mReq->ptr, mReq->dma);
+	kfree(mReq);
+
+	dbg_event(_usb_addr(mEp), "FREE", 0);
+
+	spin_unlock_irqrestore(mEp->lock, flags);
+}
+
+/**
+ * ep_queue: queues (submits) an I/O request to an endpoint
+ *
+ * Check usb_ep_queue()* at usb_gadget.h" for details
+ */
+static int ep_queue(struct usb_ep *ep, struct usb_request *req,
+		    gfp_t __maybe_unused gfp_flags)
+{
+	struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
+	struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
+	struct ci13xxx *udc = mEp->udc;
+	int retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL || req == NULL || mEp->ep.desc == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(mEp->lock, flags);
+
+	if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
+		if (req->length)
+			mEp = (udc->ep0_dir == RX) ?
+			       udc->ep0out : udc->ep0in;
+		if (!list_empty(&mEp->qh.queue)) {
+			_ep_nuke(mEp);
+			retval = -EOVERFLOW;
+			dev_warn(mEp->udc->dev, "endpoint ctrl %X nuked\n",
+				 _usb_addr(mEp));
+		}
+	}
+
+	/* first nuke then test link, e.g. previous status has not sent */
+	if (!list_empty(&mReq->queue)) {
+		retval = -EBUSY;
+		dev_err(mEp->udc->dev, "request already in queue\n");
+		goto done;
+	}
+
+	if (req->length > 4 * CI13XXX_PAGE_SIZE) {
+		req->length = 4 * CI13XXX_PAGE_SIZE;
+		retval = -EMSGSIZE;
+		dev_warn(mEp->udc->dev, "request length truncated\n");
+	}
+
+	dbg_queue(_usb_addr(mEp), req, retval);
+
+	/* push request */
+	mReq->req.status = -EINPROGRESS;
+	mReq->req.actual = 0;
+
+	retval = _hardware_enqueue(mEp, mReq);
+
+	if (retval == -EALREADY) {
+		dbg_event(_usb_addr(mEp), "QUEUE", retval);
+		retval = 0;
+	}
+	if (!retval)
+		list_add_tail(&mReq->queue, &mEp->qh.queue);
+
+ done:
+	spin_unlock_irqrestore(mEp->lock, flags);
+	return retval;
+}
+
+/**
+ * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
+ *
+ * Check usb_ep_dequeue() at "usb_gadget.h" for details
+ */
+static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
+	struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
+	unsigned long flags;
+
+	if (ep == NULL || req == NULL || mReq->req.status != -EALREADY ||
+		mEp->ep.desc == NULL || list_empty(&mReq->queue) ||
+		list_empty(&mEp->qh.queue))
+		return -EINVAL;
+
+	spin_lock_irqsave(mEp->lock, flags);
+
+	dbg_event(_usb_addr(mEp), "DEQUEUE", 0);
+
+	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+
+	/* pop request */
+	list_del_init(&mReq->queue);
+
+	usb_gadget_unmap_request(&mEp->udc->gadget, req, mEp->dir);
+
+	req->status = -ECONNRESET;
+
+	if (mReq->req.complete != NULL) {
+		spin_unlock(mEp->lock);
+		mReq->req.complete(&mEp->ep, &mReq->req);
+		spin_lock(mEp->lock);
+	}
+
+	spin_unlock_irqrestore(mEp->lock, flags);
+	return 0;
+}
+
+/**
+ * ep_set_halt: sets the endpoint halt feature
+ *
+ * Check usb_ep_set_halt() at "usb_gadget.h" for details
+ */
+static int ep_set_halt(struct usb_ep *ep, int value)
+{
+	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+	int direction, retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL || mEp->ep.desc == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(mEp->lock, flags);
+
+#ifndef STALL_IN
+	/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
+	if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX &&
+	    !list_empty(&mEp->qh.queue)) {
+		spin_unlock_irqrestore(mEp->lock, flags);
+		return -EAGAIN;
+	}
+#endif
+
+	direction = mEp->dir;
+	do {
+		dbg_event(_usb_addr(mEp), "HALT", value);
+		retval |= hw_ep_set_halt(mEp->udc, mEp->num, mEp->dir, value);
+
+		if (!value)
+			mEp->wedge = 0;
+
+		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
+			mEp->dir = (mEp->dir == TX) ? RX : TX;
+
+	} while (mEp->dir != direction);
+
+	spin_unlock_irqrestore(mEp->lock, flags);
+	return retval;
+}
+
+/**
+ * ep_set_wedge: sets the halt feature and ignores clear requests
+ *
+ * Check usb_ep_set_wedge() at "usb_gadget.h" for details
+ */
+static int ep_set_wedge(struct usb_ep *ep)
+{
+	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+	unsigned long flags;
+
+	if (ep == NULL || mEp->ep.desc == NULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(mEp->lock, flags);
+
+	dbg_event(_usb_addr(mEp), "WEDGE", 0);
+	mEp->wedge = 1;
+
+	spin_unlock_irqrestore(mEp->lock, flags);
+
+	return usb_ep_set_halt(ep);
+}
+
+/**
+ * ep_fifo_flush: flushes contents of a fifo
+ *
+ * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
+ */
+static void ep_fifo_flush(struct usb_ep *ep)
+{
+	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
+	unsigned long flags;
+
+	if (ep == NULL) {
+		dev_err(mEp->udc->dev, "%02X: -EINVAL\n", _usb_addr(mEp));
+		return;
+	}
+
+	spin_lock_irqsave(mEp->lock, flags);
+
+	dbg_event(_usb_addr(mEp), "FFLUSH", 0);
+	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+
+	spin_unlock_irqrestore(mEp->lock, flags);
+}
+
+/**
+ * Endpoint-specific part of the API to the USB controller hardware
+ * Check "usb_gadget.h" for details
+ */
+static const struct usb_ep_ops usb_ep_ops = {
+	.enable	       = ep_enable,
+	.disable       = ep_disable,
+	.alloc_request = ep_alloc_request,
+	.free_request  = ep_free_request,
+	.queue	       = ep_queue,
+	.dequeue       = ep_dequeue,
+	.set_halt      = ep_set_halt,
+	.set_wedge     = ep_set_wedge,
+	.fifo_flush    = ep_fifo_flush,
+};
+
+/******************************************************************************
+ * GADGET block
+ *****************************************************************************/
+static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	unsigned long flags;
+	int gadget_ready = 0;
+
+	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS))
+		return -EOPNOTSUPP;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->vbus_active = is_active;
+	if (udc->driver)
+		gadget_ready = 1;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (gadget_ready) {
+		if (is_active) {
+			pm_runtime_get_sync(&_gadget->dev);
+			hw_device_reset(udc, USBMODE_CM_DC);
+			hw_device_state(udc, udc->ep0out->qh.dma);
+		} else {
+			hw_device_state(udc, 0);
+			if (udc->udc_driver->notify_event)
+				udc->udc_driver->notify_event(udc,
+				CI13XXX_CONTROLLER_STOPPED_EVENT);
+			_gadget_stop_activity(&udc->gadget);
+			pm_runtime_put_sync(&_gadget->dev);
+		}
+	}
+
+	return 0;
+}
+
+static int ci13xxx_wakeup(struct usb_gadget *_gadget)
+{
+	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if (!udc->remote_wakeup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+	if (!hw_read(udc, OP_PORTSC, PORTSC_SUSP)) {
+		ret = -EINVAL;
+		goto out;
+	}
+	hw_write(udc, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
+out:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
+}
+
+static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+
+	if (udc->transceiver)
+		return usb_phy_set_power(udc->transceiver, mA);
+	return -ENOTSUPP;
+}
+
+static int ci13xxx_start(struct usb_gadget *gadget,
+			 struct usb_gadget_driver *driver);
+static int ci13xxx_stop(struct usb_gadget *gadget,
+			struct usb_gadget_driver *driver);
+/**
+ * Device operations part of the API to the USB controller hardware,
+ * which don't involve endpoints (or i/o)
+ * Check  "usb_gadget.h" for details
+ */
+static const struct usb_gadget_ops usb_gadget_ops = {
+	.vbus_session	= ci13xxx_vbus_session,
+	.wakeup		= ci13xxx_wakeup,
+	.vbus_draw	= ci13xxx_vbus_draw,
+	.udc_start	= ci13xxx_start,
+	.udc_stop	= ci13xxx_stop,
+};
+
+static int init_eps(struct ci13xxx *udc)
+{
+	int retval = 0, i, j;
+
+	for (i = 0; i < udc->hw_ep_max/2; i++)
+		for (j = RX; j <= TX; j++) {
+			int k = i + j * udc->hw_ep_max/2;
+			struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k];
+
+			scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i,
+					(j == TX)  ? "in" : "out");
+
+			mEp->udc          = udc;
+			mEp->lock         = &udc->lock;
+			mEp->td_pool      = udc->td_pool;
+
+			mEp->ep.name      = mEp->name;
+			mEp->ep.ops       = &usb_ep_ops;
+			mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
+
+			INIT_LIST_HEAD(&mEp->qh.queue);
+			mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL,
+						     &mEp->qh.dma);
+			if (mEp->qh.ptr == NULL)
+				retval = -ENOMEM;
+			else
+				memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr));
+
+			/*
+			 * set up shorthands for ep0 out and in endpoints,
+			 * don't add to gadget's ep_list
+			 */
+			if (i == 0) {
+				if (j == RX)
+					udc->ep0out = mEp;
+				else
+					udc->ep0in = mEp;
+
+				continue;
+			}
+
+			list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list);
+		}
+
+	return retval;
+}
+
+/**
+ * ci13xxx_start: register a gadget driver
+ * @gadget: our gadget
+ * @driver: the driver being registered
+ *
+ * Interrupts are enabled here.
+ */
+static int ci13xxx_start(struct usb_gadget *gadget,
+			 struct usb_gadget_driver *driver)
+{
+	struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget);
+	unsigned long flags;
+	int retval = -ENOMEM;
+
+	if (driver->disconnect == NULL)
+		return -EINVAL;
+
+
+	udc->ep0out->ep.desc = &ctrl_endpt_out_desc;
+	retval = usb_ep_enable(&udc->ep0out->ep);
+	if (retval)
+		return retval;
+
+	udc->ep0in->ep.desc = &ctrl_endpt_in_desc;
+	retval = usb_ep_enable(&udc->ep0in->ep);
+	if (retval)
+		return retval;
+	spin_lock_irqsave(&udc->lock, flags);
+
+	udc->driver = driver;
+	pm_runtime_get_sync(&udc->gadget.dev);
+	if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) {
+		if (udc->vbus_active) {
+			if (udc->udc_driver->flags & CI13XXX_REGS_SHARED)
+				hw_device_reset(udc, USBMODE_CM_DC);
+		} else {
+			pm_runtime_put_sync(&udc->gadget.dev);
+			goto done;
+		}
+	}
+
+	retval = hw_device_state(udc, udc->ep0out->qh.dma);
+	if (retval)
+		pm_runtime_put_sync(&udc->gadget.dev);
+
+ done:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return retval;
+}
+
+/**
+ * ci13xxx_stop: unregister a gadget driver
+ */
+static int ci13xxx_stop(struct usb_gadget *gadget,
+			struct usb_gadget_driver *driver)
+{
+	struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) ||
+			udc->vbus_active) {
+		hw_device_state(udc, 0);
+		if (udc->udc_driver->notify_event)
+			udc->udc_driver->notify_event(udc,
+			CI13XXX_CONTROLLER_STOPPED_EVENT);
+		udc->driver = NULL;
+		spin_unlock_irqrestore(&udc->lock, flags);
+		_gadget_stop_activity(&udc->gadget);
+		spin_lock_irqsave(&udc->lock, flags);
+		pm_runtime_put(&udc->gadget.dev);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/******************************************************************************
+ * BUS block
+ *****************************************************************************/
+/**
+ * udc_irq: udc interrupt handler
+ *
+ * This function returns IRQ_HANDLED if the IRQ has been handled
+ * It locks access to registers
+ */
+static irqreturn_t udc_irq(struct ci13xxx *udc)
+{
+	irqreturn_t retval;
+	u32 intr;
+
+	if (udc == NULL)
+		return IRQ_HANDLED;
+
+	spin_lock(&udc->lock);
+
+	if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) {
+		if (hw_read(udc, OP_USBMODE, USBMODE_CM) !=
+				USBMODE_CM_DC) {
+			spin_unlock(&udc->lock);
+			return IRQ_NONE;
+		}
+	}
+	intr = hw_test_and_clear_intr_active(udc);
+	dbg_interrupt(intr);
+
+	if (intr) {
+		/* order defines priority - do NOT change it */
+		if (USBi_URI & intr)
+			isr_reset_handler(udc);
+
+		if (USBi_PCI & intr) {
+			udc->gadget.speed = hw_port_is_high_speed(udc) ?
+				USB_SPEED_HIGH : USB_SPEED_FULL;
+			if (udc->suspended && udc->driver->resume) {
+				spin_unlock(&udc->lock);
+				udc->driver->resume(&udc->gadget);
+				spin_lock(&udc->lock);
+				udc->suspended = 0;
+			}
+		}
+
+		if (USBi_UI  & intr)
+			isr_tr_complete_handler(udc);
+
+		if (USBi_SLI & intr) {
+			if (udc->gadget.speed != USB_SPEED_UNKNOWN &&
+			    udc->driver->suspend) {
+				udc->suspended = 1;
+				spin_unlock(&udc->lock);
+				udc->driver->suspend(&udc->gadget);
+				spin_lock(&udc->lock);
+			}
+		}
+		retval = IRQ_HANDLED;
+	} else {
+		retval = IRQ_NONE;
+	}
+	spin_unlock(&udc->lock);
+
+	return retval;
+}
+
+/**
+ * udc_release: driver release function
+ * @dev: device
+ *
+ * Currently does nothing
+ */
+static void udc_release(struct device *dev)
+{
+}
+
+/**
+ * udc_start: initialize gadget role
+ * @udc: chipidea controller
+ */
+static int udc_start(struct ci13xxx *udc)
+{
+	struct device *dev = udc->dev;
+	int retval = 0;
+
+	if (!udc)
+		return -EINVAL;
+
+	spin_lock_init(&udc->lock);
+
+	udc->gadget.ops          = &usb_gadget_ops;
+	udc->gadget.speed        = USB_SPEED_UNKNOWN;
+	udc->gadget.max_speed    = USB_SPEED_HIGH;
+	udc->gadget.is_otg       = 0;
+	udc->gadget.name         = udc->udc_driver->name;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+
+	dev_set_name(&udc->gadget.dev, "gadget");
+	udc->gadget.dev.dma_mask = dev->dma_mask;
+	udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
+	udc->gadget.dev.parent   = dev;
+	udc->gadget.dev.release  = udc_release;
+
+	/* alloc resources */
+	udc->qh_pool = dma_pool_create("ci13xxx_qh", dev,
+				       sizeof(struct ci13xxx_qh),
+				       64, CI13XXX_PAGE_SIZE);
+	if (udc->qh_pool == NULL)
+		return -ENOMEM;
+
+	udc->td_pool = dma_pool_create("ci13xxx_td", dev,
+				       sizeof(struct ci13xxx_td),
+				       64, CI13XXX_PAGE_SIZE);
+	if (udc->td_pool == NULL) {
+		retval = -ENOMEM;
+		goto free_qh_pool;
+	}
+
+	retval = init_eps(udc);
+	if (retval)
+		goto free_pools;
+
+	udc->gadget.ep0 = &udc->ep0in->ep;
+
+	udc->transceiver = usb_get_transceiver();
+
+	if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
+		if (udc->transceiver == NULL) {
+			retval = -ENODEV;
+			goto free_pools;
+		}
+	}
+
+	if (!(udc->udc_driver->flags & CI13XXX_REGS_SHARED)) {
+		retval = hw_device_reset(udc, USBMODE_CM_DC);
+		if (retval)
+			goto put_transceiver;
+	}
+
+	retval = device_register(&udc->gadget.dev);
+	if (retval) {
+		put_device(&udc->gadget.dev);
+		goto put_transceiver;
+	}
+
+	retval = dbg_create_files(&udc->gadget.dev);
+	if (retval)
+		goto unreg_device;
+
+	if (udc->transceiver) {
+		retval = otg_set_peripheral(udc->transceiver->otg,
+						&udc->gadget);
+		if (retval)
+			goto remove_dbg;
+	}
+
+	retval = usb_add_gadget_udc(dev, &udc->gadget);
+	if (retval)
+		goto remove_trans;
+
+	pm_runtime_no_callbacks(&udc->gadget.dev);
+	pm_runtime_enable(&udc->gadget.dev);
+
+	return retval;
+
+remove_trans:
+	if (udc->transceiver) {
+		otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
+		usb_put_transceiver(udc->transceiver);
+	}
+
+	dev_err(dev, "error = %i\n", retval);
+remove_dbg:
+	dbg_remove_files(&udc->gadget.dev);
+unreg_device:
+	device_unregister(&udc->gadget.dev);
+put_transceiver:
+	if (udc->transceiver)
+		usb_put_transceiver(udc->transceiver);
+free_pools:
+	dma_pool_destroy(udc->td_pool);
+free_qh_pool:
+	dma_pool_destroy(udc->qh_pool);
+	return retval;
+}
+
+/**
+ * udc_remove: parent remove must call this to remove UDC
+ *
+ * No interrupts active, the IRQ has been released
+ */
+static void udc_stop(struct ci13xxx *udc)
+{
+	int i;
+
+	if (udc == NULL)
+		return;
+
+	usb_del_gadget_udc(&udc->gadget);
+
+	for (i = 0; i < udc->hw_ep_max; i++) {
+		struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
+
+		dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma);
+	}
+
+	dma_pool_destroy(udc->td_pool);
+	dma_pool_destroy(udc->qh_pool);
+
+	if (udc->transceiver) {
+		otg_set_peripheral(udc->transceiver->otg, NULL);
+		usb_put_transceiver(udc->transceiver);
+	}
+	dbg_remove_files(&udc->gadget.dev);
+	device_unregister(&udc->gadget.dev);
+	/* my kobject is dynamic, I swear! */
+	memset(&udc->gadget, 0, sizeof(udc->gadget));
+}
+
+/**
+ * ci_hdrc_gadget_init - initialize device related bits
+ * ci: the controller
+ *
+ * This function enables the gadget role, if the device is "device capable".
+ */
+int ci_hdrc_gadget_init(struct ci13xxx *ci)
+{
+	struct ci_role_driver *rdrv;
+
+	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
+		return -ENXIO;
+
+	rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
+	if (!rdrv)
+		return -ENOMEM;
+
+	rdrv->start	= udc_start;
+	rdrv->stop	= udc_stop;
+	rdrv->irq	= udc_irq;
+	rdrv->name	= "gadget";
+	ci->roles[CI_ROLE_GADGET] = rdrv;
+
+	return 0;
+}
diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
new file mode 100644
index 000000000000..4ff2384d7ca8
--- /dev/null
+++ b/drivers/usb/chipidea/udc.h
@@ -0,0 +1,93 @@
+/*
+ * udc.h - ChipIdea UDC structures
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVERS_USB_CHIPIDEA_UDC_H
+#define __DRIVERS_USB_CHIPIDEA_UDC_H
+
+#include <linux/list.h>
+
+#define CTRL_PAYLOAD_MAX   64
+#define RX        0  /* similar to USB_DIR_OUT but can be used as an index */
+#define TX        1  /* similar to USB_DIR_IN  but can be used as an index */
+
+/* DMA layout of transfer descriptors */
+struct ci13xxx_td {
+	/* 0 */
+	u32 next;
+#define TD_TERMINATE          BIT(0)
+#define TD_ADDR_MASK          (0xFFFFFFEUL << 5)
+	/* 1 */
+	u32 token;
+#define TD_STATUS             (0x00FFUL <<  0)
+#define TD_STATUS_TR_ERR      BIT(3)
+#define TD_STATUS_DT_ERR      BIT(5)
+#define TD_STATUS_HALTED      BIT(6)
+#define TD_STATUS_ACTIVE      BIT(7)
+#define TD_MULTO              (0x0003UL << 10)
+#define TD_IOC                BIT(15)
+#define TD_TOTAL_BYTES        (0x7FFFUL << 16)
+	/* 2 */
+	u32 page[5];
+#define TD_CURR_OFFSET        (0x0FFFUL <<  0)
+#define TD_FRAME_NUM          (0x07FFUL <<  0)
+#define TD_RESERVED_MASK      (0x0FFFUL <<  0)
+} __attribute__ ((packed));
+
+/* DMA layout of queue heads */
+struct ci13xxx_qh {
+	/* 0 */
+	u32 cap;
+#define QH_IOS                BIT(15)
+#define QH_MAX_PKT            (0x07FFUL << 16)
+#define QH_ZLT                BIT(29)
+#define QH_MULT               (0x0003UL << 30)
+	/* 1 */
+	u32 curr;
+	/* 2 - 8 */
+	struct ci13xxx_td        td;
+	/* 9 */
+	u32 RESERVED;
+	struct usb_ctrlrequest   setup;
+} __attribute__ ((packed));
+
+/**
+ * struct ci13xxx_req - usb request representation
+ * @req: request structure for gadget drivers
+ * @queue: link to QH list
+ * @ptr: transfer descriptor for this request
+ * @dma: dma address for the transfer descriptor
+ * @zptr: transfer descriptor for the zero packet
+ * @zdma: dma address of the zero packet's transfer descriptor
+ */
+struct ci13xxx_req {
+	struct usb_request	req;
+	struct list_head	queue;
+	struct ci13xxx_td	*ptr;
+	dma_addr_t		dma;
+	struct ci13xxx_td	*zptr;
+	dma_addr_t		zdma;
+};
+
+#ifdef CONFIG_USB_CHIPIDEA_UDC
+
+int ci_hdrc_gadget_init(struct ci13xxx *ci);
+
+#else
+
+static inline int ci_hdrc_gadget_init(struct ci13xxx *ci)
+{
+	return -ENXIO;
+}
+
+#endif
+
+#endif /* __DRIVERS_USB_CHIPIDEA_UDC_H */
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b32ccb461019..f2a120eea9d4 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1664,6 +1664,7 @@ static struct usb_driver acm_driver = {
 #ifdef CONFIG_PM
 	.supports_autosuspend = 1,
 #endif
+	.disable_hub_initiated_lpm = 1,
 };
 
 /*
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 0bb2b3248dad..ea8b304f0e85 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -309,9 +309,6 @@ static void free_urbs(struct wdm_device *desc)
 
 static void cleanup(struct wdm_device *desc)
 {
-	spin_lock(&wdm_device_list_lock);
-	list_del(&desc->device_list);
-	spin_unlock(&wdm_device_list_lock);
 	kfree(desc->sbuf);
 	kfree(desc->inbuf);
 	kfree(desc->orq);
@@ -369,6 +366,7 @@ static ssize_t wdm_write
 	r = usb_autopm_get_interface(desc->intf);
 	if (r < 0) {
 		kfree(buf);
+		rv = usb_translate_errors(r);
 		goto outnp;
 	}
 
@@ -384,6 +382,7 @@ static ssize_t wdm_write
 
 	if (r < 0) {
 		kfree(buf);
+		rv = r;
 		goto out;
 	}
 
@@ -415,6 +414,7 @@ static ssize_t wdm_write
 		desc->outbuf = NULL;
 		clear_bit(WDM_IN_USE, &desc->flags);
 		dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
+		rv = usb_translate_errors(rv);
 	} else {
 		dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d",
 			req->wIndex);
@@ -530,11 +530,13 @@ static int wdm_flush(struct file *file, fl_owner_t id)
 	struct wdm_device *desc = file->private_data;
 
 	wait_event(desc->wait, !test_bit(WDM_IN_USE, &desc->flags));
-	if (desc->werr < 0)
+
+	/* cannot dereference desc->intf if WDM_DISCONNECTING */
+	if (desc->werr < 0 && !test_bit(WDM_DISCONNECTING, &desc->flags))
 		dev_err(&desc->intf->dev, "Error in flush path: %d\n",
 			desc->werr);
 
-	return desc->werr;
+	return usb_translate_errors(desc->werr);
 }
 
 static unsigned int wdm_poll(struct file *file, struct poll_table_struct *wait)
@@ -545,7 +547,7 @@ static unsigned int wdm_poll(struct file *file, struct poll_table_struct *wait)
 
 	spin_lock_irqsave(&desc->iuspin, flags);
 	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
-		mask = POLLERR;
+		mask = POLLHUP | POLLERR;
 		spin_unlock_irqrestore(&desc->iuspin, flags);
 		goto desc_out;
 	}
@@ -596,6 +598,7 @@ static int wdm_open(struct inode *inode, struct file *file)
 			desc->count--;
 			dev_err(&desc->intf->dev,
 				"Error submitting int urb - %d\n", rv);
+			rv = usb_translate_errors(rv);
 		}
 	} else {
 		rv = 0;
@@ -621,10 +624,15 @@ static int wdm_release(struct inode *inode, struct file *file)
 	mutex_unlock(&desc->wlock);
 
 	if (!desc->count) {
-		dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
-		kill_urbs(desc);
-		if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+		if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
+			dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
+			kill_urbs(desc);
 			desc->manage_power(desc->intf, 0);
+		} else {
+			/* must avoid dev_printk here as desc->intf is invalid */
+			pr_debug(KBUILD_MODNAME " %s: device gone - cleaning up\n", __func__);
+			cleanup(desc);
+		}
 	}
 	mutex_unlock(&wdm_mutex);
 	return 0;
@@ -771,6 +779,9 @@ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor
 out:
 	return rv;
 err:
+	spin_lock(&wdm_device_list_lock);
+	list_del(&desc->device_list);
+	spin_unlock(&wdm_device_list_lock);
 	cleanup(desc);
 	return rv;
 }
@@ -896,8 +907,16 @@ static void wdm_disconnect(struct usb_interface *intf)
 	cancel_work_sync(&desc->rxwork);
 	mutex_unlock(&desc->wlock);
 	mutex_unlock(&desc->rlock);
+
+	/* the desc->intf pointer used as list key is now invalid */
+	spin_lock(&wdm_device_list_lock);
+	list_del(&desc->device_list);
+	spin_unlock(&wdm_device_list_lock);
+
 	if (!desc->count)
 		cleanup(desc);
+	else
+		dev_dbg(&intf->dev, "%s: %d open files - postponing cleanup\n", __func__, desc->count);
 	mutex_unlock(&wdm_mutex);
 }
 
@@ -1015,6 +1034,7 @@ static struct usb_driver wdm_driver = {
 	.post_reset =	wdm_post_reset,
 	.id_table =	wdm_ids,
 	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
 };
 
 module_usb_driver(wdm_driver);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index a68c1a63dc65..d4c47d5d7625 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -172,27 +172,31 @@ struct usblp {
 #ifdef DEBUG
 static void usblp_dump(struct usblp *usblp)
 {
+	struct device *dev = &usblp->intf->dev;
 	int p;
 
-	dbg("usblp=0x%p", usblp);
-	dbg("dev=0x%p", usblp->dev);
-	dbg("present=%d", usblp->present);
-	dbg("readbuf=0x%p", usblp->readbuf);
-	dbg("readcount=%d", usblp->readcount);
-	dbg("ifnum=%d", usblp->ifnum);
-    for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) {
-	dbg("protocol[%d].alt_setting=%d", p, usblp->protocol[p].alt_setting);
-	dbg("protocol[%d].epwrite=%p", p, usblp->protocol[p].epwrite);
-	dbg("protocol[%d].epread=%p", p, usblp->protocol[p].epread);
-    }
-	dbg("current_protocol=%d", usblp->current_protocol);
-	dbg("minor=%d", usblp->minor);
-	dbg("wstatus=%d", usblp->wstatus);
-	dbg("rstatus=%d", usblp->rstatus);
-	dbg("quirks=%d", usblp->quirks);
-	dbg("used=%d", usblp->used);
-	dbg("bidir=%d", usblp->bidir);
-	dbg("device_id_string=\"%s\"",
+	dev_dbg(dev, "usblp=0x%p\n", usblp);
+	dev_dbg(dev, "dev=0x%p\n", usblp->dev);
+	dev_dbg(dev, "present=%d\n", usblp->present);
+	dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf);
+	dev_dbg(dev, "readcount=%d\n", usblp->readcount);
+	dev_dbg(dev, "ifnum=%d\n", usblp->ifnum);
+	for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) {
+		dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p,
+			usblp->protocol[p].alt_setting);
+		dev_dbg(dev, "protocol[%d].epwrite=%p\n", p,
+			usblp->protocol[p].epwrite);
+		dev_dbg(dev, "protocol[%d].epread=%p\n", p,
+			usblp->protocol[p].epread);
+	}
+	dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol);
+	dev_dbg(dev, "minor=%d\n", usblp->minor);
+	dev_dbg(dev, "wstatus=%d\n", usblp->wstatus);
+	dev_dbg(dev, "rstatus=%d\n", usblp->rstatus);
+	dev_dbg(dev, "quirks=%d\n", usblp->quirks);
+	dev_dbg(dev, "used=%d\n", usblp->used);
+	dev_dbg(dev, "bidir=%d\n", usblp->bidir);
+	dev_dbg(dev, "device_id_string=\"%s\"\n",
 		usblp->device_id_string ?
 			usblp->device_id_string + 2 :
 			(unsigned char *)"(null)");
@@ -262,7 +266,8 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i
 	retval = usb_control_msg(usblp->dev,
 		dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
 		request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT);
-	dbg("usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d",
+	dev_dbg(&usblp->intf->dev,
+		"usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n",
 		request, !!dir, recip, value, index, len, retval);
 	return retval < 0 ? retval : 0;
 }
@@ -500,8 +505,9 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		goto done;
 	}
 
-	dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd),
-		_IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
+	dev_dbg(&usblp->intf->dev,
+		"usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd,
+		_IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
 
 	if (_IOC_TYPE(cmd) == 'P')	/* new-style ioctl number */
 
@@ -594,7 +600,8 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 				goto done;
 			}
 
-			dbg("usblp%d requested/got HP channel %ld/%d",
+			dev_dbg(&usblp->intf->dev,
+				"usblp%d requested/got HP channel %ld/%d\n",
 				usblp->minor, arg, newChannel);
 			break;
 
@@ -614,7 +621,8 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 				goto done;
 			}
 
-			dbg("usblp%d is bus=%d, device=%d",
+			dev_dbg(&usblp->intf->dev,
+				"usblp%d is bus=%d, device=%d\n",
 				usblp->minor, twoints[0], twoints[1]);
 			break;
 
@@ -634,7 +642,8 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 				goto done;
 			}
 
-			dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X",
+			dev_dbg(&usblp->intf->dev,
+				"usblp%d is VID=0x%4.4X, PID=0x%4.4X\n",
 				usblp->minor, twoints[0], twoints[1]);
 			break;
 
@@ -987,7 +996,7 @@ static int usblp_submit_read(struct usblp *usblp)
 	usblp->rcomplete = 0;
 	spin_unlock_irqrestore(&usblp->lock, flags);
 	if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) {
-		dbg("error submitting urb (%d)", rc);
+		dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc);
 		spin_lock_irqsave(&usblp->lock, flags);
 		usblp->rstatus = rc;
 		usblp->rcomplete = 1;
@@ -1129,7 +1138,8 @@ static int usblp_probe(struct usb_interface *intf,
 	/* Analyze and pick initial alternate settings and endpoints. */
 	protocol = usblp_select_alts(usblp);
 	if (protocol < 0) {
-		dbg("incompatible printer-class device 0x%4.4X/0x%4.4X",
+		dev_dbg(&intf->dev,
+			"incompatible printer-class device 0x%4.4X/0x%4.4X\n",
 			le16_to_cpu(dev->descriptor.idVendor),
 			le16_to_cpu(dev->descriptor.idProduct));
 		retval = -ENODEV;
@@ -1158,14 +1168,14 @@ static int usblp_probe(struct usb_interface *intf,
 
 	retval = usb_register_dev(intf, &usblp_class);
 	if (retval) {
-		printk(KERN_ERR "usblp: Not able to get a minor"
-		    " (base %u, slice default): %d\n",
-		    USBLP_MINOR_BASE, retval);
+		dev_err(&intf->dev,
+			"usblp: Not able to get a minor (base %u, slice default): %d\n",
+			USBLP_MINOR_BASE, retval);
 		goto abort_intfdata;
 	}
 	usblp->minor = intf->minor;
-	printk(KERN_INFO "usblp%d: USB %sdirectional printer dev %d "
-		"if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n",
+	dev_info(&intf->dev,
+		"usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n",
 		usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
 		usblp->ifnum,
 		usblp->protocol[usblp->current_protocol].alt_setting,
@@ -1302,7 +1312,8 @@ static int usblp_set_protocol(struct usblp *usblp, int protocol)
 
 	usblp->bidir = (usblp->protocol[protocol].epread != NULL);
 	usblp->current_protocol = protocol;
-	dbg("usblp%d set protocol %d", usblp->minor, protocol);
+	dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n",
+		usblp->minor, protocol);
 	return 0;
 }
 
@@ -1315,7 +1326,8 @@ static int usblp_cache_device_id_string(struct usblp *usblp)
 
 	err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1);
 	if (err < 0) {
-		dbg("usblp%d: error = %d reading IEEE-1284 Device ID string",
+		dev_dbg(&usblp->intf->dev,
+			"usblp%d: error = %d reading IEEE-1284 Device ID string\n",
 			usblp->minor, err);
 		usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
 		return -EIO;
@@ -1331,7 +1343,7 @@ static int usblp_cache_device_id_string(struct usblp *usblp)
 		length = USBLP_DEVICE_ID_SIZE - 1;
 	usblp->device_id_string[length] = '\0';
 
-	dbg("usblp%d Device ID string [len=%d]=\"%s\"",
+	dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n",
 		usblp->minor, length, &usblp->device_id_string[2]);
 
 	return length;
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 18d02e32a3d5..9981984b365b 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -27,58 +27,6 @@ config USB_ANNOUNCE_NEW_DEVICES
 comment "Miscellaneous USB options"
 	depends on USB
 
-config USB_DEVICEFS
-	bool "USB device filesystem (DEPRECATED)"
-	depends on USB
-	---help---
-	  If you say Y here (and to "/proc file system support" in the "File
-	  systems" section, above), you will get a file /proc/bus/usb/devices
-	  which lists the devices currently connected to your USB bus or
-	  busses, and for every connected device a file named
-	  "/proc/bus/usb/xxx/yyy", where xxx is the bus number and yyy the
-	  device number; the latter files can be used by user space programs
-	  to talk directly to the device. These files are "virtual", meaning
-	  they are generated on the fly and not stored on the hard drive.
-
-	  You may need to mount the usbfs file system to see the files, use
-	  mount -t usbfs none /proc/bus/usb
-
-	  For the format of the various /proc/bus/usb/ files, please read
-	  <file:Documentation/usb/proc_usb_info.txt>.
-
-	  Modern Linux systems do not use this.
-
-	  Usbfs entries are files and not character devices; usbfs can't
-	  handle Access Control Lists (ACL) which are the default way to
-	  grant access to USB devices for untrusted users of a desktop
-	  system.
-
-	  The usbfs functionality is replaced by real device-nodes managed by
-	  udev.  These nodes lived in /dev/bus/usb and are used by libusb.
-
-config USB_DEVICE_CLASS
-	bool "USB device class-devices (DEPRECATED)"
-	depends on USB
-	default y
-	---help---
-	  Userspace access to USB devices is granted by device-nodes exported
-	  directly from the usbdev in sysfs. Old versions of the driver
-	  core and udev needed additional class devices to export device nodes.
-
-	  These additional devices are difficult to handle in userspace, if
-	  information about USB interfaces must be available. One device
-	  contains the device node, the other device contains the interface
-	  data. Both devices are at the same level in sysfs (siblings) and one
-	  can't access the other. The device node created directly by the
-	  usb device is the parent device of the interface and therefore
-	  easily accessible from the interface event.
-
-	  This option provides backward compatibility for libusb device
-	  nodes (lsusb) when usbfs is not used, and the following udev rule
-	  doesn't exist:
-	    SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \
-	    NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644"
-
 config USB_DYNAMIC_MINORS
 	bool "Dynamic USB minor allocation"
 	depends on USB
@@ -125,7 +73,6 @@ config USB_OTG_WHITELIST
 	bool "Rely on OTG Targeted Peripherals List"
 	depends on USB_OTG || EXPERT
 	default y if USB_OTG
-	default n if EXPERT
 	help
 	  If you say Y here, the "otg_whitelist.h" file will be used as a
 	  product whitelist, so USB peripherals not listed there will be
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index 507a4e1b6360..26059b93dbf4 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -9,6 +9,6 @@ usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o
 usbcore-y += devio.o notify.o generic.o quirks.o devices.o
 
 usbcore-$(CONFIG_PCI)		+= hcd-pci.o
-usbcore-$(CONFIG_USB_DEVICEFS)	+= inode.o
+usbcore-$(CONFIG_ACPI)		+= usb-acpi.o
 
 obj-$(CONFIG_USB)		+= usbcore.o
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 8df4b76465ac..e0f107948eba 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -333,17 +333,14 @@ static struct async *async_getcompleted(struct dev_state *ps)
 static struct async *async_getpending(struct dev_state *ps,
 					     void __user *userurb)
 {
-	unsigned long flags;
 	struct async *as;
 
-	spin_lock_irqsave(&ps->lock, flags);
 	list_for_each_entry(as, &ps->async_pending, asynclist)
 		if (as->userurb == userurb) {
 			list_del_init(&as->asynclist);
-			spin_unlock_irqrestore(&ps->lock, flags);
 			return as;
 		}
-	spin_unlock_irqrestore(&ps->lock, flags);
+
 	return NULL;
 }
 
@@ -398,6 +395,7 @@ static void cancel_bulk_urbs(struct dev_state *ps, unsigned bulk_addr)
 __releases(ps->lock)
 __acquires(ps->lock)
 {
+	struct urb *urb;
 	struct async *as;
 
 	/* Mark all the pending URBs that match bulk_addr, up to but not
@@ -420,8 +418,11 @@ __acquires(ps->lock)
 	list_for_each_entry(as, &ps->async_pending, asynclist) {
 		if (as->bulk_status == AS_UNLINK) {
 			as->bulk_status = 0;		/* Only once */
+			urb = as->urb;
+			usb_get_urb(urb);
 			spin_unlock(&ps->lock);		/* Allow completions */
-			usb_unlink_urb(as->urb);
+			usb_unlink_urb(urb);
+			usb_put_urb(urb);
 			spin_lock(&ps->lock);
 			goto rescan;
 		}
@@ -472,6 +473,7 @@ static void async_completed(struct urb *urb)
 
 static void destroy_async(struct dev_state *ps, struct list_head *list)
 {
+	struct urb *urb;
 	struct async *as;
 	unsigned long flags;
 
@@ -479,10 +481,13 @@ static void destroy_async(struct dev_state *ps, struct list_head *list)
 	while (!list_empty(list)) {
 		as = list_entry(list->next, struct async, asynclist);
 		list_del_init(&as->asynclist);
+		urb = as->urb;
+		usb_get_urb(urb);
 
 		/* drop the spinlock so the completion handler can run */
 		spin_unlock_irqrestore(&ps->lock, flags);
-		usb_kill_urb(as->urb);
+		usb_kill_urb(urb);
+		usb_put_urb(urb);
 		spin_lock_irqsave(&ps->lock, flags);
 	}
 	spin_unlock_irqrestore(&ps->lock, flags);
@@ -727,17 +732,6 @@ static int usbdev_open(struct inode *inode, struct file *file)
 	if (imajor(inode) == USB_DEVICE_MAJOR)
 		dev = usbdev_lookup_by_devt(inode->i_rdev);
 
-#ifdef CONFIG_USB_DEVICEFS
-	/* procfs file */
-	if (!dev) {
-		dev = inode->i_private;
-		if (dev && dev->usbfs_dentry &&
-					dev->usbfs_dentry->d_inode == inode)
-			usb_get_dev(dev);
-		else
-			dev = NULL;
-	}
-#endif
 	mutex_unlock(&usbfs_mutex);
 
 	if (!dev)
@@ -1410,12 +1404,24 @@ static int proc_submiturb(struct dev_state *ps, void __user *arg)
 
 static int proc_unlinkurb(struct dev_state *ps, void __user *arg)
 {
+	struct urb *urb;
 	struct async *as;
+	unsigned long flags;
 
+	spin_lock_irqsave(&ps->lock, flags);
 	as = async_getpending(ps, arg);
-	if (!as)
+	if (!as) {
+		spin_unlock_irqrestore(&ps->lock, flags);
 		return -EINVAL;
-	usb_kill_urb(as->urb);
+	}
+
+	urb = as->urb;
+	usb_get_urb(urb);
+	spin_unlock_irqrestore(&ps->lock, flags);
+
+	usb_kill_urb(urb);
+	usb_put_urb(urb);
+
 	return 0;
 }
 
@@ -2062,44 +2068,13 @@ static void usbdev_remove(struct usb_device *udev)
 	}
 }
 
-#ifdef CONFIG_USB_DEVICE_CLASS
-static struct class *usb_classdev_class;
-
-static int usb_classdev_add(struct usb_device *dev)
-{
-	struct device *cldev;
-
-	cldev = device_create(usb_classdev_class, &dev->dev, dev->dev.devt,
-			      NULL, "usbdev%d.%d", dev->bus->busnum,
-			      dev->devnum);
-	if (IS_ERR(cldev))
-		return PTR_ERR(cldev);
-	dev->usb_classdev = cldev;
-	return 0;
-}
-
-static void usb_classdev_remove(struct usb_device *dev)
-{
-	if (dev->usb_classdev)
-		device_unregister(dev->usb_classdev);
-}
-
-#else
-#define usb_classdev_add(dev)		0
-#define usb_classdev_remove(dev)	do {} while (0)
-
-#endif
-
 static int usbdev_notify(struct notifier_block *self,
 			       unsigned long action, void *dev)
 {
 	switch (action) {
 	case USB_DEVICE_ADD:
-		if (usb_classdev_add(dev))
-			return NOTIFY_BAD;
 		break;
 	case USB_DEVICE_REMOVE:
-		usb_classdev_remove(dev);
 		usbdev_remove(dev);
 		break;
 	}
@@ -2129,21 +2104,6 @@ int __init usb_devio_init(void)
 		       USB_DEVICE_MAJOR);
 		goto error_cdev;
 	}
-#ifdef CONFIG_USB_DEVICE_CLASS
-	usb_classdev_class = class_create(THIS_MODULE, "usb_device");
-	if (IS_ERR(usb_classdev_class)) {
-		printk(KERN_ERR "Unable to register usb_device class\n");
-		retval = PTR_ERR(usb_classdev_class);
-		cdev_del(&usb_device_cdev);
-		usb_classdev_class = NULL;
-		goto out;
-	}
-	/* devices of this class shadow the major:minor of their parent
-	 * device, so clear ->dev_kobj to prevent adding duplicate entries
-	 * to /sys/dev
-	 */
-	usb_classdev_class->dev_kobj = NULL;
-#endif
 	usb_register_notify(&usbdev_nb);
 out:
 	return retval;
@@ -2156,9 +2116,6 @@ error_cdev:
 void usb_devio_cleanup(void)
 {
 	usb_unregister_notify(&usbdev_nb);
-#ifdef CONFIG_USB_DEVICE_CLASS
-	class_destroy(usb_classdev_class);
-#endif
 	cdev_del(&usb_device_cdev);
 	unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
 }
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 9a56635dc19c..f536aebc958e 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -79,6 +79,30 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids,
 }
 EXPORT_SYMBOL_GPL(usb_store_new_id);
 
+ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf)
+{
+	struct usb_dynid *dynid;
+	size_t count = 0;
+
+	list_for_each_entry(dynid, &dynids->list, node)
+		if (dynid->id.bInterfaceClass != 0)
+			count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x %02x\n",
+					   dynid->id.idVendor, dynid->id.idProduct,
+					   dynid->id.bInterfaceClass);
+		else
+			count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x\n",
+					   dynid->id.idVendor, dynid->id.idProduct);
+	return count;
+}
+EXPORT_SYMBOL_GPL(usb_show_dynids);
+
+static ssize_t show_dynids(struct device_driver *driver, char *buf)
+{
+	struct usb_driver *usb_drv = to_usb_driver(driver);
+
+	return usb_show_dynids(&usb_drv->dynids, buf);
+}
+
 static ssize_t store_new_id(struct device_driver *driver,
 			    const char *buf, size_t count)
 {
@@ -86,7 +110,7 @@ static ssize_t store_new_id(struct device_driver *driver,
 
 	return usb_store_new_id(&usb_drv->dynids, driver, buf, count);
 }
-static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id);
+static DRIVER_ATTR(new_id, S_IRUGO | S_IWUSR, show_dynids, store_new_id);
 
 /**
  * store_remove_id - remove a USB device ID from this driver
@@ -127,7 +151,7 @@ store_remove_id(struct device_driver *driver, const char *buf, size_t count)
 		return retval;
 	return count;
 }
-static DRIVER_ATTR(remove_id, S_IWUSR, NULL, store_remove_id);
+static DRIVER_ATTR(remove_id, S_IRUGO | S_IWUSR, show_dynids, store_remove_id);
 
 static int usb_create_newid_files(struct usb_driver *usb_drv)
 {
@@ -264,6 +288,7 @@ static int usb_probe_interface(struct device *dev)
 	struct usb_device *udev = interface_to_usbdev(intf);
 	const struct usb_device_id *id;
 	int error = -ENODEV;
+	int lpm_disable_error;
 
 	dev_dbg(dev, "%s\n", __func__);
 
@@ -300,6 +325,25 @@ static int usb_probe_interface(struct device *dev)
 	if (driver->supports_autosuspend)
 		pm_runtime_enable(dev);
 
+	/* If the new driver doesn't allow hub-initiated LPM, and we can't
+	 * disable hub-initiated LPM, then fail the probe.
+	 *
+	 * Otherwise, leaving LPM enabled should be harmless, because the
+	 * endpoint intervals should remain the same, and the U1/U2 timeouts
+	 * should remain the same.
+	 *
+	 * If we need to install alt setting 0 before probe, or another alt
+	 * setting during probe, that should also be fine.  usb_set_interface()
+	 * will attempt to disable LPM, and fail if it can't disable it.
+	 */
+	lpm_disable_error = usb_unlocked_disable_lpm(udev);
+	if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
+		dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.",
+				__func__, driver->name);
+		error = lpm_disable_error;
+		goto err;
+	}
+
 	/* Carry out a deferred switch to altsetting 0 */
 	if (intf->needs_altsetting0) {
 		error = usb_set_interface(udev, intf->altsetting[0].
@@ -314,6 +358,11 @@ static int usb_probe_interface(struct device *dev)
 		goto err;
 
 	intf->condition = USB_INTERFACE_BOUND;
+
+	/* If the LPM disable succeeded, balance the ref counts. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
 	usb_autosuspend_device(udev);
 	return error;
 
@@ -337,7 +386,7 @@ static int usb_unbind_interface(struct device *dev)
 	struct usb_driver *driver = to_usb_driver(dev->driver);
 	struct usb_interface *intf = to_usb_interface(dev);
 	struct usb_device *udev;
-	int error, r;
+	int error, r, lpm_disable_error;
 
 	intf->condition = USB_INTERFACE_UNBINDING;
 
@@ -345,6 +394,13 @@ static int usb_unbind_interface(struct device *dev)
 	udev = interface_to_usbdev(intf);
 	error = usb_autoresume_device(udev);
 
+	/* Hub-initiated LPM policy may change, so attempt to disable LPM until
+	 * the driver is unbound.  If LPM isn't disabled, that's fine because it
+	 * wouldn't be enabled unless all the bound interfaces supported
+	 * hub-initiated LPM.
+	 */
+	lpm_disable_error = usb_unlocked_disable_lpm(udev);
+
 	/* Terminate all URBs for this interface unless the driver
 	 * supports "soft" unbinding.
 	 */
@@ -378,6 +434,10 @@ static int usb_unbind_interface(struct device *dev)
 	intf->condition = USB_INTERFACE_UNBOUND;
 	intf->needs_remote_wakeup = 0;
 
+	/* Attempt to re-enable USB3 LPM, if the disable succeeded. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
 	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
 	if (driver->supports_autosuspend)
 		pm_runtime_disable(dev);
@@ -418,17 +478,29 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 				struct usb_interface *iface, void *priv)
 {
 	struct device *dev = &iface->dev;
+	struct usb_device *udev;
 	int retval = 0;
+	int lpm_disable_error;
 
 	if (dev->driver)
 		return -EBUSY;
 
+	udev = interface_to_usbdev(iface);
+
 	dev->driver = &driver->drvwrap.driver;
 	usb_set_intfdata(iface, priv);
 	iface->needs_binding = 0;
 
 	iface->condition = USB_INTERFACE_BOUND;
 
+	/* Disable LPM until this driver is bound. */
+	lpm_disable_error = usb_unlocked_disable_lpm(udev);
+	if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
+		dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.",
+				__func__, driver->name);
+		return -ENOMEM;
+	}
+
 	/* Claimed interfaces are initially inactive (suspended) and
 	 * runtime-PM-enabled, but only if the driver has autosuspend
 	 * support.  Otherwise they are marked active, to prevent the
@@ -447,6 +519,10 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 	if (device_is_registered(dev))
 		retval = device_bind_driver(dev);
 
+	/* Attempt to re-enable USB3 LPM, if the disable was successful. */
+	if (!lpm_disable_error)
+		usb_unlocked_enable_lpm(udev);
+
 	return retval;
 }
 EXPORT_SYMBOL_GPL(usb_driver_claim_interface);
@@ -726,16 +802,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
 		return -ENODEV;
 	}
 
-#ifdef	CONFIG_USB_DEVICEFS
-	/* If this is available, userspace programs can directly read
-	 * all the device descriptors we don't tell them about.  Or
-	 * act as usermode drivers.
-	 */
-	if (add_uevent_var(env, "DEVICE=/proc/bus/usb/%03d/%03d",
-			   usb_dev->bus->busnum, usb_dev->devnum))
-		return -ENOMEM;
-#endif
-
 	/* per-device configurations are common */
 	if (add_uevent_var(env, "PRODUCT=%x/%x/%x",
 			   le16_to_cpu(usb_dev->descriptor.idVendor),
@@ -788,15 +854,13 @@ int usb_register_device_driver(struct usb_device_driver *new_udriver,
 
 	retval = driver_register(&new_udriver->drvwrap.driver);
 
-	if (!retval) {
+	if (!retval)
 		pr_info("%s: registered new device driver %s\n",
 			usbcore_name, new_udriver->name);
-		usbfs_update_special();
-	} else {
+	else
 		printk(KERN_ERR "%s: error %d registering device "
 			"	driver %s\n",
 			usbcore_name, retval, new_udriver->name);
-	}
 
 	return retval;
 }
@@ -815,7 +879,6 @@ void usb_deregister_device_driver(struct usb_device_driver *udriver)
 			usbcore_name, udriver->name);
 
 	driver_unregister(&udriver->drvwrap.driver);
-	usbfs_update_special();
 }
 EXPORT_SYMBOL_GPL(usb_deregister_device_driver);
 
@@ -856,8 +919,6 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner,
 	if (retval)
 		goto out;
 
-	usbfs_update_special();
-
 	retval = usb_create_newid_files(new_driver);
 	if (retval)
 		goto out_newid;
@@ -897,8 +958,6 @@ void usb_deregister(struct usb_driver *driver)
 	usb_remove_newid_files(driver);
 	driver_unregister(&driver->drvwrap.driver);
 	usb_free_dynids(driver);
-
-	usbfs_update_special();
 }
 EXPORT_SYMBOL_GPL(usb_deregister);
 
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index d95760de9e8b..e673b26e598f 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -183,7 +183,7 @@ int usb_register_dev(struct usb_interface *intf,
 	if (retval)
 		return retval;
 
-	dev_dbg(&intf->dev, "looking for a minor, starting at %d", minor_base);
+	dev_dbg(&intf->dev, "looking for a minor, starting at %d\n", minor_base);
 
 	down_write(&minor_rwsem);
 	for (minor = minor_base; minor < MAX_USB_MINORS; ++minor) {
@@ -239,7 +239,7 @@ void usb_deregister_dev(struct usb_interface *intf,
 	if (intf->minor == -1)
 		return;
 
-	dbg ("removing %d minor", intf->minor);
+	dev_dbg(&intf->dev, "removing %d minor\n", intf->minor);
 
 	down_write(&minor_rwsem);
 	usb_minors[intf->minor] = NULL;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 140d3e11f212..190b1ec7bdcb 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -138,7 +138,7 @@ static const u8 usb3_rh_dev_descriptor[18] = {
 	0x03,       /*  __u8  bDeviceProtocol; USB 3.0 hub */
 	0x09,       /*  __u8  bMaxPacketSize0; 2^9 = 512 Bytes */
 
-	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation */
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
 	0x03, 0x00, /*  __le16 idProduct; device 0x0003 */
 	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
 
@@ -159,7 +159,7 @@ static const u8 usb2_rh_dev_descriptor [18] = {
 	0x00,       /*  __u8  bDeviceProtocol; [ usb 2.0 no TT ] */
 	0x40,       /*  __u8  bMaxPacketSize0; 64 Bytes */
 
-	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation */
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
 	0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
 	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
 
@@ -182,7 +182,7 @@ static const u8 usb11_rh_dev_descriptor [18] = {
 	0x00,       /*  __u8  bDeviceProtocol; [ low/full speeds only ] */
 	0x40,       /*  __u8  bMaxPacketSize0; 64 Bytes */
 
-	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation */
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
 	0x01, 0x00, /*  __le16 idProduct; device 0x0001 */
 	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
 
@@ -997,6 +997,15 @@ static int register_root_hub(struct usb_hcd *hcd)
 				dev_name(&usb_dev->dev), retval);
 		return (retval < 0) ? retval : -EMSGSIZE;
 	}
+	if (usb_dev->speed == USB_SPEED_SUPER) {
+		retval = usb_get_bos_descriptor(usb_dev);
+		if (retval < 0) {
+			mutex_unlock(&usb_bus_list_lock);
+			dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
+					dev_name(&usb_dev->dev), retval);
+			return retval;
+		}
+	}
 
 	retval = usb_new_device (usb_dev);
 	if (retval) {
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index ec6c97dadbe4..04fb834c3fa1 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -177,6 +177,228 @@ static struct usb_hub *hdev_to_hub(struct usb_device *hdev)
 	return usb_get_intfdata(hdev->actconfig->interface[0]);
 }
 
+static int usb_device_supports_lpm(struct usb_device *udev)
+{
+	/* USB 2.1 (and greater) devices indicate LPM support through
+	 * their USB 2.0 Extended Capabilities BOS descriptor.
+	 */
+	if (udev->speed == USB_SPEED_HIGH) {
+		if (udev->bos->ext_cap &&
+			(USB_LPM_SUPPORT &
+			 le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
+			return 1;
+		return 0;
+	}
+
+	/* All USB 3.0 must support LPM, but we need their max exit latency
+	 * information from the SuperSpeed Extended Capabilities BOS descriptor.
+	 */
+	if (!udev->bos->ss_cap) {
+		dev_warn(&udev->dev, "No LPM exit latency info found.  "
+				"Power management will be impacted.\n");
+		return 0;
+	}
+	if (udev->parent->lpm_capable)
+		return 1;
+
+	dev_warn(&udev->dev, "Parent hub missing LPM exit latency info.  "
+			"Power management will be impacted.\n");
+	return 0;
+}
+
+/*
+ * Set the Maximum Exit Latency (MEL) for the host to initiate a transition from
+ * either U1 or U2.
+ */
+static void usb_set_lpm_mel(struct usb_device *udev,
+		struct usb3_lpm_parameters *udev_lpm_params,
+		unsigned int udev_exit_latency,
+		struct usb_hub *hub,
+		struct usb3_lpm_parameters *hub_lpm_params,
+		unsigned int hub_exit_latency)
+{
+	unsigned int total_mel;
+	unsigned int device_mel;
+	unsigned int hub_mel;
+
+	/*
+	 * Calculate the time it takes to transition all links from the roothub
+	 * to the parent hub into U0.  The parent hub must then decode the
+	 * packet (hub header decode latency) to figure out which port it was
+	 * bound for.
+	 *
+	 * The Hub Header decode latency is expressed in 0.1us intervals (0x1
+	 * means 0.1us).  Multiply that by 100 to get nanoseconds.
+	 */
+	total_mel = hub_lpm_params->mel +
+		(hub->descriptor->u.ss.bHubHdrDecLat * 100);
+
+	/*
+	 * How long will it take to transition the downstream hub's port into
+	 * U0?  The greater of either the hub exit latency or the device exit
+	 * latency.
+	 *
+	 * The BOS U1/U2 exit latencies are expressed in 1us intervals.
+	 * Multiply that by 1000 to get nanoseconds.
+	 */
+	device_mel = udev_exit_latency * 1000;
+	hub_mel = hub_exit_latency * 1000;
+	if (device_mel > hub_mel)
+		total_mel += device_mel;
+	else
+		total_mel += hub_mel;
+
+	udev_lpm_params->mel = total_mel;
+}
+
+/*
+ * Set the maximum Device to Host Exit Latency (PEL) for the device to initiate
+ * a transition from either U1 or U2.
+ */
+static void usb_set_lpm_pel(struct usb_device *udev,
+		struct usb3_lpm_parameters *udev_lpm_params,
+		unsigned int udev_exit_latency,
+		struct usb_hub *hub,
+		struct usb3_lpm_parameters *hub_lpm_params,
+		unsigned int hub_exit_latency,
+		unsigned int port_to_port_exit_latency)
+{
+	unsigned int first_link_pel;
+	unsigned int hub_pel;
+
+	/*
+	 * First, the device sends an LFPS to transition the link between the
+	 * device and the parent hub into U0.  The exit latency is the bigger of
+	 * the device exit latency or the hub exit latency.
+	 */
+	if (udev_exit_latency > hub_exit_latency)
+		first_link_pel = udev_exit_latency * 1000;
+	else
+		first_link_pel = hub_exit_latency * 1000;
+
+	/*
+	 * When the hub starts to receive the LFPS, there is a slight delay for
+	 * it to figure out that one of the ports is sending an LFPS.  Then it
+	 * will forward the LFPS to its upstream link.  The exit latency is the
+	 * delay, plus the PEL that we calculated for this hub.
+	 */
+	hub_pel = port_to_port_exit_latency * 1000 + hub_lpm_params->pel;
+
+	/*
+	 * According to figure C-7 in the USB 3.0 spec, the PEL for this device
+	 * is the greater of the two exit latencies.
+	 */
+	if (first_link_pel > hub_pel)
+		udev_lpm_params->pel = first_link_pel;
+	else
+		udev_lpm_params->pel = hub_pel;
+}
+
+/*
+ * Set the System Exit Latency (SEL) to indicate the total worst-case time from
+ * when a device initiates a transition to U0, until when it will receive the
+ * first packet from the host controller.
+ *
+ * Section C.1.5.1 describes the four components to this:
+ *  - t1: device PEL
+ *  - t2: time for the ERDY to make it from the device to the host.
+ *  - t3: a host-specific delay to process the ERDY.
+ *  - t4: time for the packet to make it from the host to the device.
+ *
+ * t3 is specific to both the xHCI host and the platform the host is integrated
+ * into.  The Intel HW folks have said it's negligible, FIXME if a different
+ * vendor says otherwise.
+ */
+static void usb_set_lpm_sel(struct usb_device *udev,
+		struct usb3_lpm_parameters *udev_lpm_params)
+{
+	struct usb_device *parent;
+	unsigned int num_hubs;
+	unsigned int total_sel;
+
+	/* t1 = device PEL */
+	total_sel = udev_lpm_params->pel;
+	/* How many external hubs are in between the device & the root port. */
+	for (parent = udev->parent, num_hubs = 0; parent->parent;
+			parent = parent->parent)
+		num_hubs++;
+	/* t2 = 2.1us + 250ns * (num_hubs - 1) */
+	if (num_hubs > 0)
+		total_sel += 2100 + 250 * (num_hubs - 1);
+
+	/* t4 = 250ns * num_hubs */
+	total_sel += 250 * num_hubs;
+
+	udev_lpm_params->sel = total_sel;
+}
+
+static void usb_set_lpm_parameters(struct usb_device *udev)
+{
+	struct usb_hub *hub;
+	unsigned int port_to_port_delay;
+	unsigned int udev_u1_del;
+	unsigned int udev_u2_del;
+	unsigned int hub_u1_del;
+	unsigned int hub_u2_del;
+
+	if (!udev->lpm_capable || udev->speed != USB_SPEED_SUPER)
+		return;
+
+	hub = hdev_to_hub(udev->parent);
+	/* It doesn't take time to transition the roothub into U0, since it
+	 * doesn't have an upstream link.
+	 */
+	if (!hub)
+		return;
+
+	udev_u1_del = udev->bos->ss_cap->bU1devExitLat;
+	udev_u2_del = udev->bos->ss_cap->bU2DevExitLat;
+	hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat;
+	hub_u2_del = udev->parent->bos->ss_cap->bU2DevExitLat;
+
+	usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del,
+			hub, &udev->parent->u1_params, hub_u1_del);
+
+	usb_set_lpm_mel(udev, &udev->u2_params, udev_u2_del,
+			hub, &udev->parent->u2_params, hub_u2_del);
+
+	/*
+	 * Appendix C, section C.2.2.2, says that there is a slight delay from
+	 * when the parent hub notices the downstream port is trying to
+	 * transition to U0 to when the hub initiates a U0 transition on its
+	 * upstream port.  The section says the delays are tPort2PortU1EL and
+	 * tPort2PortU2EL, but it doesn't define what they are.
+	 *
+	 * The hub chapter, sections 10.4.2.4 and 10.4.2.5 seem to be talking
+	 * about the same delays.  Use the maximum delay calculations from those
+	 * sections.  For U1, it's tHubPort2PortExitLat, which is 1us max.  For
+	 * U2, it's tHubPort2PortExitLat + U2DevExitLat - U1DevExitLat.  I
+	 * assume the device exit latencies they are talking about are the hub
+	 * exit latencies.
+	 *
+	 * What do we do if the U2 exit latency is less than the U1 exit
+	 * latency?  It's possible, although not likely...
+	 */
+	port_to_port_delay = 1;
+
+	usb_set_lpm_pel(udev, &udev->u1_params, udev_u1_del,
+			hub, &udev->parent->u1_params, hub_u1_del,
+			port_to_port_delay);
+
+	if (hub_u2_del > hub_u1_del)
+		port_to_port_delay = 1 + hub_u2_del - hub_u1_del;
+	else
+		port_to_port_delay = 1 + hub_u1_del;
+
+	usb_set_lpm_pel(udev, &udev->u2_params, udev_u2_del,
+			hub, &udev->parent->u2_params, hub_u2_del,
+			port_to_port_delay);
+
+	/* Now that we've got PEL, calculate SEL. */
+	usb_set_lpm_sel(udev, &udev->u1_params);
+	usb_set_lpm_sel(udev, &udev->u2_params);
+}
+
 /* USB 2.0 spec Section 11.24.4.5 */
 static int get_hub_descriptor(struct usb_device *hdev, void *data)
 {
@@ -2480,6 +2702,12 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	if (udev->usb2_hw_lpm_enabled == 1)
 		usb_set_usb2_hardware_lpm(udev, 0);
 
+	if (usb_unlocked_disable_lpm(udev)) {
+		dev_err(&udev->dev, "%s Failed to disable LPM before suspend\n.",
+				__func__);
+		return -ENOMEM;
+	}
+
 	/* see 7.1.7.6 */
 	if (hub_is_superspeed(hub->hdev))
 		status = set_port_feature(hub->hdev,
@@ -2499,6 +2727,13 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 				NULL, 0,
 				USB_CTRL_SET_TIMEOUT);
 
+		/* Try to enable USB2 hardware LPM again */
+		if (udev->usb2_hw_lpm_capable == 1)
+			usb_set_usb2_hardware_lpm(udev, 1);
+
+		/* Try to enable USB3 LPM again */
+		usb_unlocked_enable_lpm(udev);
+
 		/* System sleep transitions should never fail */
 		if (!PMSG_IS_AUTO(msg))
 			status = 0;
@@ -2696,6 +2931,9 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 		/* Try to enable USB2 hardware LPM */
 		if (udev->usb2_hw_lpm_capable == 1)
 			usb_set_usb2_hardware_lpm(udev, 1);
+
+		/* Try to enable USB3 LPM */
+		usb_unlocked_enable_lpm(udev);
 	}
 
 	return status;
@@ -2824,11 +3062,429 @@ void usb_root_hub_lost_power(struct usb_device *rhdev)
 }
 EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
 
+static const char * const usb3_lpm_names[]  = {
+	"U0",
+	"U1",
+	"U2",
+	"U3",
+};
+
+/*
+ * Send a Set SEL control transfer to the device, prior to enabling
+ * device-initiated U1 or U2.  This lets the device know the exit latencies from
+ * the time the device initiates a U1 or U2 exit, to the time it will receive a
+ * packet from the host.
+ *
+ * This function will fail if the SEL or PEL values for udev are greater than
+ * the maximum allowed values for the link state to be enabled.
+ */
+static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
+{
+	struct usb_set_sel_req *sel_values;
+	unsigned long long u1_sel;
+	unsigned long long u1_pel;
+	unsigned long long u2_sel;
+	unsigned long long u2_pel;
+	int ret;
+
+	/* Convert SEL and PEL stored in ns to us */
+	u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+	u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);
+	u2_sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+	u2_pel = DIV_ROUND_UP(udev->u2_params.pel, 1000);
+
+	/*
+	 * Make sure that the calculated SEL and PEL values for the link
+	 * state we're enabling aren't bigger than the max SEL/PEL
+	 * value that will fit in the SET SEL control transfer.
+	 * Otherwise the device would get an incorrect idea of the exit
+	 * latency for the link state, and could start a device-initiated
+	 * U1/U2 when the exit latencies are too high.
+	 */
+	if ((state == USB3_LPM_U1 &&
+				(u1_sel > USB3_LPM_MAX_U1_SEL_PEL ||
+				 u1_pel > USB3_LPM_MAX_U1_SEL_PEL)) ||
+			(state == USB3_LPM_U2 &&
+			 (u2_sel > USB3_LPM_MAX_U2_SEL_PEL ||
+			  u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) {
+		dev_dbg(&udev->dev, "Device-initiated %s disabled due "
+				"to long SEL %llu ms or PEL %llu ms\n",
+				usb3_lpm_names[state], u1_sel, u1_pel);
+		return -EINVAL;
+	}
+
+	/*
+	 * If we're enabling device-initiated LPM for one link state,
+	 * but the other link state has a too high SEL or PEL value,
+	 * just set those values to the max in the Set SEL request.
+	 */
+	if (u1_sel > USB3_LPM_MAX_U1_SEL_PEL)
+		u1_sel = USB3_LPM_MAX_U1_SEL_PEL;
+
+	if (u1_pel > USB3_LPM_MAX_U1_SEL_PEL)
+		u1_pel = USB3_LPM_MAX_U1_SEL_PEL;
+
+	if (u2_sel > USB3_LPM_MAX_U2_SEL_PEL)
+		u2_sel = USB3_LPM_MAX_U2_SEL_PEL;
+
+	if (u2_pel > USB3_LPM_MAX_U2_SEL_PEL)
+		u2_pel = USB3_LPM_MAX_U2_SEL_PEL;
+
+	/*
+	 * usb_enable_lpm() can be called as part of a failed device reset,
+	 * which may be initiated by an error path of a mass storage driver.
+	 * Therefore, use GFP_NOIO.
+	 */
+	sel_values = kmalloc(sizeof *(sel_values), GFP_NOIO);
+	if (!sel_values)
+		return -ENOMEM;
+
+	sel_values->u1_sel = u1_sel;
+	sel_values->u1_pel = u1_pel;
+	sel_values->u2_sel = cpu_to_le16(u2_sel);
+	sel_values->u2_pel = cpu_to_le16(u2_pel);
+
+	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			USB_REQ_SET_SEL,
+			USB_RECIP_DEVICE,
+			0, 0,
+			sel_values, sizeof *(sel_values),
+			USB_CTRL_SET_TIMEOUT);
+	kfree(sel_values);
+	return ret;
+}
+
+/*
+ * Enable or disable device-initiated U1 or U2 transitions.
+ */
+static int usb_set_device_initiated_lpm(struct usb_device *udev,
+		enum usb3_link_state state, bool enable)
+{
+	int ret;
+	int feature;
+
+	switch (state) {
+	case USB3_LPM_U1:
+		feature = USB_DEVICE_U1_ENABLE;
+		break;
+	case USB3_LPM_U2:
+		feature = USB_DEVICE_U2_ENABLE;
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't %s non-U1 or U2 state.\n",
+				__func__, enable ? "enable" : "disable");
+		return -EINVAL;
+	}
+
+	if (udev->state != USB_STATE_CONFIGURED) {
+		dev_dbg(&udev->dev, "%s: Can't %s %s state "
+				"for unconfigured device.\n",
+				__func__, enable ? "enable" : "disable",
+				usb3_lpm_names[state]);
+		return 0;
+	}
+
+	if (enable) {
+		/*
+		 * First, let the device know about the exit latencies
+		 * associated with the link state we're about to enable.
+		 */
+		ret = usb_req_set_sel(udev, state);
+		if (ret < 0) {
+			dev_warn(&udev->dev, "Set SEL for device-initiated "
+					"%s failed.\n", usb3_lpm_names[state]);
+			return -EBUSY;
+		}
+		/*
+		 * Now send the control transfer to enable device-initiated LPM
+		 * for either U1 or U2.
+		 */
+		ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE,
+				USB_RECIP_DEVICE,
+				feature,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+	} else {
+		ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				USB_REQ_CLEAR_FEATURE,
+				USB_RECIP_DEVICE,
+				feature,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+	}
+	if (ret < 0) {
+		dev_warn(&udev->dev, "%s of device-initiated %s failed.\n",
+				enable ? "Enable" : "Disable",
+				usb3_lpm_names[state]);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+static int usb_set_lpm_timeout(struct usb_device *udev,
+		enum usb3_link_state state, int timeout)
+{
+	int ret;
+	int feature;
+
+	switch (state) {
+	case USB3_LPM_U1:
+		feature = USB_PORT_FEAT_U1_TIMEOUT;
+		break;
+	case USB3_LPM_U2:
+		feature = USB_PORT_FEAT_U2_TIMEOUT;
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't set timeout for non-U1 or U2 state.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	if (state == USB3_LPM_U1 && timeout > USB3_LPM_U1_MAX_TIMEOUT &&
+			timeout != USB3_LPM_DEVICE_INITIATED) {
+		dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x, "
+				"which is a reserved value.\n",
+				usb3_lpm_names[state], timeout);
+		return -EINVAL;
+	}
+
+	ret = set_port_feature(udev->parent,
+			USB_PORT_LPM_TIMEOUT(timeout) | udev->portnum,
+			feature);
+	if (ret < 0) {
+		dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x,"
+				"error code %i\n", usb3_lpm_names[state],
+				timeout, ret);
+		return -EBUSY;
+	}
+	if (state == USB3_LPM_U1)
+		udev->u1_params.timeout = timeout;
+	else
+		udev->u2_params.timeout = timeout;
+	return 0;
+}
+
+/*
+ * Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated
+ * U1/U2 entry.
+ *
+ * We will attempt to enable U1 or U2, but there are no guarantees that the
+ * control transfers to set the hub timeout or enable device-initiated U1/U2
+ * will be successful.
+ *
+ * If we cannot set the parent hub U1/U2 timeout, we attempt to let the xHCI
+ * driver know about it.  If that call fails, it should be harmless, and just
+ * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency.
+ */
+static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	int timeout;
+
+	/* We allow the host controller to set the U1/U2 timeout internally
+	 * first, so that it can change its schedule to account for the
+	 * additional latency to send data to a device in a lower power
+	 * link state.
+	 */
+	timeout = hcd->driver->enable_usb3_lpm_timeout(hcd, udev, state);
+
+	/* xHCI host controller doesn't want to enable this LPM state. */
+	if (timeout == 0)
+		return;
+
+	if (timeout < 0) {
+		dev_warn(&udev->dev, "Could not enable %s link state, "
+				"xHCI error %i.\n", usb3_lpm_names[state],
+				timeout);
+		return;
+	}
+
+	if (usb_set_lpm_timeout(udev, state, timeout))
+		/* If we can't set the parent hub U1/U2 timeout,
+		 * device-initiated LPM won't be allowed either, so let the xHCI
+		 * host know that this link state won't be enabled.
+		 */
+		hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+
+	/* Only a configured device will accept the Set Feature U1/U2_ENABLE */
+	else if (udev->actconfig)
+		usb_set_device_initiated_lpm(udev, state, true);
+
+}
+
+/*
+ * Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated
+ * U1/U2 entry.
+ *
+ * If this function returns -EBUSY, the parent hub will still allow U1/U2 entry.
+ * If zero is returned, the parent will not allow the link to go into U1/U2.
+ *
+ * If zero is returned, device-initiated U1/U2 entry may still be enabled, but
+ * it won't have an effect on the bus link state because the parent hub will
+ * still disallow device-initiated U1/U2 entry.
+ *
+ * If zero is returned, the xHCI host controller may still think U1/U2 entry is
+ * possible.  The result will be slightly more bus bandwidth will be taken up
+ * (to account for U1/U2 exit latency), but it should be harmless.
+ */
+static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	int feature;
+
+	switch (state) {
+	case USB3_LPM_U1:
+		feature = USB_PORT_FEAT_U1_TIMEOUT;
+		break;
+	case USB3_LPM_U2:
+		feature = USB_PORT_FEAT_U2_TIMEOUT;
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't disable non-U1 or U2 state.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	if (usb_set_lpm_timeout(udev, state, 0))
+		return -EBUSY;
+
+	usb_set_device_initiated_lpm(udev, state, false);
+
+	if (hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state))
+		dev_warn(&udev->dev, "Could not disable xHCI %s timeout, "
+				"bus schedule bandwidth may be impacted.\n",
+				usb3_lpm_names[state]);
+	return 0;
+}
+
+/*
+ * Disable hub-initiated and device-initiated U1 and U2 entry.
+ * Caller must own the bandwidth_mutex.
+ *
+ * This will call usb_enable_lpm() on failure, which will decrement
+ * lpm_disable_count, and will re-enable LPM if lpm_disable_count reaches zero.
+ */
+int usb_disable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd;
+
+	if (!udev || !udev->parent ||
+			udev->speed != USB_SPEED_SUPER ||
+			!udev->lpm_capable)
+		return 0;
+
+	hcd = bus_to_hcd(udev->bus);
+	if (!hcd || !hcd->driver->disable_usb3_lpm_timeout)
+		return 0;
+
+	udev->lpm_disable_count++;
+	if ((udev->u1_params.timeout == 0 && udev->u1_params.timeout == 0))
+		return 0;
+
+	/* If LPM is enabled, attempt to disable it. */
+	if (usb_disable_link_state(hcd, udev, USB3_LPM_U1))
+		goto enable_lpm;
+	if (usb_disable_link_state(hcd, udev, USB3_LPM_U2))
+		goto enable_lpm;
+
+	return 0;
+
+enable_lpm:
+	usb_enable_lpm(udev);
+	return -EBUSY;
+}
+EXPORT_SYMBOL_GPL(usb_disable_lpm);
+
+/* Grab the bandwidth_mutex before calling usb_disable_lpm() */
+int usb_unlocked_disable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+	int ret;
+
+	if (!hcd)
+		return -EINVAL;
+
+	mutex_lock(hcd->bandwidth_mutex);
+	ret = usb_disable_lpm(udev);
+	mutex_unlock(hcd->bandwidth_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
+
+/*
+ * Attempt to enable device-initiated and hub-initiated U1 and U2 entry.  The
+ * xHCI host policy may prevent U1 or U2 from being enabled.
+ *
+ * Other callers may have disabled link PM, so U1 and U2 entry will be disabled
+ * until the lpm_disable_count drops to zero.  Caller must own the
+ * bandwidth_mutex.
+ */
+void usb_enable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd;
+
+	if (!udev || !udev->parent ||
+			udev->speed != USB_SPEED_SUPER ||
+			!udev->lpm_capable)
+		return;
+
+	udev->lpm_disable_count--;
+	hcd = bus_to_hcd(udev->bus);
+	/* Double check that we can both enable and disable LPM.
+	 * Device must be configured to accept set feature U1/U2 timeout.
+	 */
+	if (!hcd || !hcd->driver->enable_usb3_lpm_timeout ||
+			!hcd->driver->disable_usb3_lpm_timeout)
+		return;
+
+	if (udev->lpm_disable_count > 0)
+		return;
+
+	usb_enable_link_state(hcd, udev, USB3_LPM_U1);
+	usb_enable_link_state(hcd, udev, USB3_LPM_U2);
+}
+EXPORT_SYMBOL_GPL(usb_enable_lpm);
+
+/* Grab the bandwidth_mutex before calling usb_enable_lpm() */
+void usb_unlocked_enable_lpm(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (!hcd)
+		return;
+
+	mutex_lock(hcd->bandwidth_mutex);
+	usb_enable_lpm(udev);
+	mutex_unlock(hcd->bandwidth_mutex);
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
+
+
 #else	/* CONFIG_PM */
 
 #define hub_suspend		NULL
 #define hub_resume		NULL
 #define hub_reset_resume	NULL
+
+int usb_disable_lpm(struct usb_device *udev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_disable_lpm);
+
+void usb_enable_lpm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_enable_lpm);
+
+int usb_unlocked_disable_lpm(struct usb_device *udev)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
+
+void usb_unlocked_enable_lpm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
 #endif
 
 
@@ -3208,9 +3864,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(udev);
 		if (!retval) {
-			if (udev->bos->ext_cap && (USB_LPM_SUPPORT &
-				le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
-					udev->lpm_capable = 1;
+			udev->lpm_capable = usb_device_supports_lpm(udev);
+			usb_set_lpm_parameters(udev);
 		}
 	}
 
@@ -4042,11 +4697,22 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 		goto done;
 
 	mutex_lock(hcd->bandwidth_mutex);
+	/* Disable LPM while we reset the device and reinstall the alt settings.
+	 * Device-initiated LPM settings, and system exit latency settings are
+	 * cleared when the device is reset, so we have to set them up again.
+	 */
+	ret = usb_disable_lpm(udev);
+	if (ret) {
+		dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
+		mutex_unlock(hcd->bandwidth_mutex);
+		goto done;
+	}
 	ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
 	if (ret < 0) {
 		dev_warn(&udev->dev,
 				"Busted HC?  Not enough HCD resources for "
 				"old configuration.\n");
+		usb_enable_lpm(udev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		goto re_enumerate;
 	}
@@ -4058,6 +4724,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 		dev_err(&udev->dev,
 			"can't restore configuration #%d (error=%d)\n",
 			udev->actconfig->desc.bConfigurationValue, ret);
+		usb_enable_lpm(udev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		goto re_enumerate;
   	}
@@ -4096,10 +4763,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 				desc->bInterfaceNumber,
 				desc->bAlternateSetting,
 				ret);
+			usb_unlocked_enable_lpm(udev);
 			goto re_enumerate;
 		}
 	}
 
+	/* Now that the alt settings are re-installed, enable LPM. */
+	usb_unlocked_enable_lpm(udev);
 done:
 	return 0;
  
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
deleted file mode 100644
index d2b9af59cba9..000000000000
--- a/drivers/usb/core/inode.c
+++ /dev/null
@@ -1,748 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	inode.c  --  Inode/Dentry functions for the USB device file system.
- *
- *	Copyright (C) 2000 Thomas Sailer (sailer@ife.ee.ethz.ch)
- *	Copyright (C) 2001,2002,2004 Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History:
- *   0.1  04.01.2000  Created
- *   0.2  10.12.2001  converted to use the vfs layer better
- */
-
-/*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/mount.h>
-#include <linux/pagemap.h>
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-#include <linux/usb.h>
-#include <linux/namei.h>
-#include <linux/usbdevice_fs.h>
-#include <linux/parser.h>
-#include <linux/notifier.h>
-#include <linux/seq_file.h>
-#include <linux/usb/hcd.h>
-#include <asm/byteorder.h>
-#include "usb.h"
-
-#define USBFS_DEFAULT_DEVMODE (S_IWUSR | S_IRUGO)
-#define USBFS_DEFAULT_BUSMODE (S_IXUGO | S_IRUGO)
-#define USBFS_DEFAULT_LISTMODE S_IRUGO
-
-static const struct file_operations default_file_operations;
-static struct vfsmount *usbfs_mount;
-static int usbfs_mount_count;	/* = 0 */
-
-static struct dentry *devices_usbfs_dentry;
-static int num_buses;	/* = 0 */
-
-static uid_t devuid;	/* = 0 */
-static uid_t busuid;	/* = 0 */
-static uid_t listuid;	/* = 0 */
-static gid_t devgid;	/* = 0 */
-static gid_t busgid;	/* = 0 */
-static gid_t listgid;	/* = 0 */
-static umode_t devmode = USBFS_DEFAULT_DEVMODE;
-static umode_t busmode = USBFS_DEFAULT_BUSMODE;
-static umode_t listmode = USBFS_DEFAULT_LISTMODE;
-
-static int usbfs_show_options(struct seq_file *seq, struct dentry *root)
-{
-	if (devuid != 0)
-		seq_printf(seq, ",devuid=%u", devuid);
-	if (devgid != 0)
-		seq_printf(seq, ",devgid=%u", devgid);
-	if (devmode != USBFS_DEFAULT_DEVMODE)
-		seq_printf(seq, ",devmode=%o", devmode);
-	if (busuid != 0)
-		seq_printf(seq, ",busuid=%u", busuid);
-	if (busgid != 0)
-		seq_printf(seq, ",busgid=%u", busgid);
-	if (busmode != USBFS_DEFAULT_BUSMODE)
-		seq_printf(seq, ",busmode=%o", busmode);
-	if (listuid != 0)
-		seq_printf(seq, ",listuid=%u", listuid);
-	if (listgid != 0)
-		seq_printf(seq, ",listgid=%u", listgid);
-	if (listmode != USBFS_DEFAULT_LISTMODE)
-		seq_printf(seq, ",listmode=%o", listmode);
-
-	return 0;
-}
-
-enum {
-	Opt_devuid, Opt_devgid, Opt_devmode,
-	Opt_busuid, Opt_busgid, Opt_busmode,
-	Opt_listuid, Opt_listgid, Opt_listmode,
-	Opt_err,
-};
-
-static const match_table_t tokens = {
-	{Opt_devuid, "devuid=%u"},
-	{Opt_devgid, "devgid=%u"},
-	{Opt_devmode, "devmode=%o"},
-	{Opt_busuid, "busuid=%u"},
-	{Opt_busgid, "busgid=%u"},
-	{Opt_busmode, "busmode=%o"},
-	{Opt_listuid, "listuid=%u"},
-	{Opt_listgid, "listgid=%u"},
-	{Opt_listmode, "listmode=%o"},
-	{Opt_err, NULL}
-};
-
-static int parse_options(struct super_block *s, char *data)
-{
-	char *p;
-	int option;
-
-	/* (re)set to defaults. */
-	devuid = 0;
-	busuid = 0;
-	listuid = 0;
-	devgid = 0;
-	busgid = 0;
-	listgid = 0;
-	devmode = USBFS_DEFAULT_DEVMODE;
-	busmode = USBFS_DEFAULT_BUSMODE;
-	listmode = USBFS_DEFAULT_LISTMODE;
-
-	while ((p = strsep(&data, ",")) != NULL) {
-		substring_t args[MAX_OPT_ARGS];
-		int token;
-		if (!*p)
-			continue;
-
-		token = match_token(p, tokens, args);
-		switch (token) {
-		case Opt_devuid:
-			if (match_int(&args[0], &option))
-			       return -EINVAL;
-			devuid = option;
-			break;
-		case Opt_devgid:
-			if (match_int(&args[0], &option))
-			       return -EINVAL;
-			devgid = option;
-			break;
-		case Opt_devmode:
-			if (match_octal(&args[0], &option))
-				return -EINVAL;
-			devmode = option & S_IRWXUGO;
-			break;
-		case Opt_busuid:
-			if (match_int(&args[0], &option))
-			       return -EINVAL;
-			busuid = option;
-			break;
-		case Opt_busgid:
-			if (match_int(&args[0], &option))
-			       return -EINVAL;
-			busgid = option;
-			break;
-		case Opt_busmode:
-			if (match_octal(&args[0], &option))
-				return -EINVAL;
-			busmode = option & S_IRWXUGO;
-			break;
-		case Opt_listuid:
-			if (match_int(&args[0], &option))
-			       return -EINVAL;
-			listuid = option;
-			break;
-		case Opt_listgid:
-			if (match_int(&args[0], &option))
-			       return -EINVAL;
-			listgid = option;
-			break;
-		case Opt_listmode:
-			if (match_octal(&args[0], &option))
-				return -EINVAL;
-			listmode = option & S_IRWXUGO;
-			break;
-		default:
-			printk(KERN_ERR "usbfs: unrecognised mount option "
-			       "\"%s\" or missing value\n", p);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-static void update_special(struct dentry *special)
-{
-	special->d_inode->i_uid = listuid;
-	special->d_inode->i_gid = listgid;
-	special->d_inode->i_mode = S_IFREG | listmode;
-}
-
-static void update_dev(struct dentry *dev)
-{
-	dev->d_inode->i_uid = devuid;
-	dev->d_inode->i_gid = devgid;
-	dev->d_inode->i_mode = S_IFREG | devmode;
-}
-
-static void update_bus(struct dentry *bus)
-{
-	struct dentry *dev = NULL;
-
-	bus->d_inode->i_uid = busuid;
-	bus->d_inode->i_gid = busgid;
-	bus->d_inode->i_mode = S_IFDIR | busmode;
-
-	mutex_lock(&bus->d_inode->i_mutex);
-
-	list_for_each_entry(dev, &bus->d_subdirs, d_u.d_child)
-		if (dev->d_inode)
-			update_dev(dev);
-
-	mutex_unlock(&bus->d_inode->i_mutex);
-}
-
-static void update_sb(struct super_block *sb)
-{
-	struct dentry *root = sb->s_root;
-	struct dentry *bus = NULL;
-
-	if (!root)
-		return;
-
-	mutex_lock_nested(&root->d_inode->i_mutex, I_MUTEX_PARENT);
-
-	list_for_each_entry(bus, &root->d_subdirs, d_u.d_child) {
-		if (bus->d_inode) {
-			switch (S_IFMT & bus->d_inode->i_mode) {
-			case S_IFDIR:
-				update_bus(bus);
-				break;
-			case S_IFREG:
-				update_special(bus);
-				break;
-			default:
-				printk(KERN_WARNING "usbfs: Unknown node %s "
-				       "mode %x found on remount!\n",
-				       bus->d_name.name, bus->d_inode->i_mode);
-				break;
-			}
-		}
-	}
-
-	mutex_unlock(&root->d_inode->i_mutex);
-}
-
-static int remount(struct super_block *sb, int *flags, char *data)
-{
-	/* If this is not a real mount,
-	 * i.e. it's a simple_pin_fs from create_special_files,
-	 * then ignore it.
-	 */
-	if (*flags & MS_KERNMOUNT)
-		return 0;
-
-	if (parse_options(sb, data)) {
-		printk(KERN_WARNING "usbfs: mount parameter error.\n");
-		return -EINVAL;
-	}
-
-	if (usbfs_mount)
-		update_sb(usbfs_mount->mnt_sb);
-
-	return 0;
-}
-
-static struct inode *usbfs_get_inode (struct super_block *sb, umode_t mode, dev_t dev)
-{
-	struct inode *inode = new_inode(sb);
-
-	if (inode) {
-		inode->i_ino = get_next_ino();
-		inode_init_owner(inode, NULL, mode);
-		inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
-		switch (mode & S_IFMT) {
-		default:
-			init_special_inode(inode, mode, dev);
-			break;
-		case S_IFREG:
-			inode->i_fop = &default_file_operations;
-			break;
-		case S_IFDIR:
-			inode->i_op = &simple_dir_inode_operations;
-			inode->i_fop = &simple_dir_operations;
-
-			/* directory inodes start off with i_nlink == 2 (for "." entry) */
-			inc_nlink(inode);
-			break;
-		}
-	}
-	return inode; 
-}
-
-/* SMP-safe */
-static int usbfs_mknod (struct inode *dir, struct dentry *dentry, umode_t mode,
-			dev_t dev)
-{
-	struct inode *inode = usbfs_get_inode(dir->i_sb, mode, dev);
-	int error = -EPERM;
-
-	if (dentry->d_inode)
-		return -EEXIST;
-
-	if (inode) {
-		d_instantiate(dentry, inode);
-		dget(dentry);
-		error = 0;
-	}
-	return error;
-}
-
-static int usbfs_mkdir (struct inode *dir, struct dentry *dentry, umode_t mode)
-{
-	int res;
-
-	mode = (mode & (S_IRWXUGO | S_ISVTX)) | S_IFDIR;
-	res = usbfs_mknod (dir, dentry, mode, 0);
-	if (!res)
-		inc_nlink(dir);
-	return res;
-}
-
-static int usbfs_create (struct inode *dir, struct dentry *dentry, umode_t mode)
-{
-	mode = (mode & S_IALLUGO) | S_IFREG;
-	return usbfs_mknod (dir, dentry, mode, 0);
-}
-
-static inline int usbfs_positive (struct dentry *dentry)
-{
-	return dentry->d_inode && !d_unhashed(dentry);
-}
-
-static int usbfs_empty (struct dentry *dentry)
-{
-	struct list_head *list;
-
-	spin_lock(&dentry->d_lock);
-	list_for_each(list, &dentry->d_subdirs) {
-		struct dentry *de = list_entry(list, struct dentry, d_u.d_child);
-
-		spin_lock_nested(&de->d_lock, DENTRY_D_LOCK_NESTED);
-		if (usbfs_positive(de)) {
-			spin_unlock(&de->d_lock);
-			spin_unlock(&dentry->d_lock);
-			return 0;
-		}
-		spin_unlock(&de->d_lock);
-	}
-	spin_unlock(&dentry->d_lock);
-	return 1;
-}
-
-static int usbfs_unlink (struct inode *dir, struct dentry *dentry)
-{
-	struct inode *inode = dentry->d_inode;
-	mutex_lock(&inode->i_mutex);
-	drop_nlink(dentry->d_inode);
-	dput(dentry);
-	mutex_unlock(&inode->i_mutex);
-	d_delete(dentry);
-	return 0;
-}
-
-static int usbfs_rmdir(struct inode *dir, struct dentry *dentry)
-{
-	int error = -ENOTEMPTY;
-	struct inode * inode = dentry->d_inode;
-
-	mutex_lock(&inode->i_mutex);
-	dentry_unhash(dentry);
-	if (usbfs_empty(dentry)) {
-		dont_mount(dentry);
-		drop_nlink(dentry->d_inode);
-		drop_nlink(dentry->d_inode);
-		dput(dentry);
-		inode->i_flags |= S_DEAD;
-		drop_nlink(dir);
-		error = 0;
-	}
-	mutex_unlock(&inode->i_mutex);
-	if (!error)
-		d_delete(dentry);
-	return error;
-}
-
-
-/* default file operations */
-static ssize_t default_read_file (struct file *file, char __user *buf,
-				  size_t count, loff_t *ppos)
-{
-	return 0;
-}
-
-static ssize_t default_write_file (struct file *file, const char __user *buf,
-				   size_t count, loff_t *ppos)
-{
-	return count;
-}
-
-static loff_t default_file_lseek (struct file *file, loff_t offset, int orig)
-{
-	loff_t retval = -EINVAL;
-
-	mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
-	switch(orig) {
-	case 0:
-		if (offset > 0) {
-			file->f_pos = offset;
-			retval = file->f_pos;
-		} 
-		break;
-	case 1:
-		if ((offset + file->f_pos) > 0) {
-			file->f_pos += offset;
-			retval = file->f_pos;
-		} 
-		break;
-	default:
-		break;
-	}
-	mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
-	return retval;
-}
-
-static const struct file_operations default_file_operations = {
-	.read =		default_read_file,
-	.write =	default_write_file,
-	.open =		simple_open,
-	.llseek =	default_file_lseek,
-};
-
-static const struct super_operations usbfs_ops = {
-	.statfs =	simple_statfs,
-	.drop_inode =	generic_delete_inode,
-	.remount_fs =	remount,
-	.show_options = usbfs_show_options,
-};
-
-static int usbfs_fill_super(struct super_block *sb, void *data, int silent)
-{
-	struct inode *inode;
-
-	sb->s_blocksize = PAGE_CACHE_SIZE;
-	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
-	sb->s_magic = USBDEVICE_SUPER_MAGIC;
-	sb->s_op = &usbfs_ops;
-	sb->s_time_gran = 1;
-	inode = usbfs_get_inode(sb, S_IFDIR | 0755, 0);
-	sb->s_root = d_make_root(inode);
-	if (!sb->s_root) {
-		dbg("%s: could not get root dentry!",__func__);
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-/*
- * fs_create_by_name - create a file, given a name
- * @name:	name of file
- * @mode:	type of file
- * @parent:	dentry of directory to create it in
- * @dentry:	resulting dentry of file
- *
- * This function handles both regular files and directories.
- */
-static int fs_create_by_name (const char *name, umode_t mode,
-			      struct dentry *parent, struct dentry **dentry)
-{
-	int error = 0;
-
-	/* If the parent is not specified, we create it in the root.
-	 * We need the root dentry to do this, which is in the super 
-	 * block. A pointer to that is in the struct vfsmount that we
-	 * have around.
-	 */
-	if (!parent ) {
-		if (usbfs_mount)
-			parent = usbfs_mount->mnt_root;
-	}
-
-	if (!parent) {
-		dbg("Ah! can not find a parent!");
-		return -EFAULT;
-	}
-
-	*dentry = NULL;
-	mutex_lock(&parent->d_inode->i_mutex);
-	*dentry = lookup_one_len(name, parent, strlen(name));
-	if (!IS_ERR(*dentry)) {
-		if (S_ISDIR(mode))
-			error = usbfs_mkdir (parent->d_inode, *dentry, mode);
-		else 
-			error = usbfs_create (parent->d_inode, *dentry, mode);
-	} else
-		error = PTR_ERR(*dentry);
-	mutex_unlock(&parent->d_inode->i_mutex);
-
-	return error;
-}
-
-static struct dentry *fs_create_file (const char *name, umode_t mode,
-				      struct dentry *parent, void *data,
-				      const struct file_operations *fops,
-				      uid_t uid, gid_t gid)
-{
-	struct dentry *dentry;
-	int error;
-
-	dbg("creating file '%s'",name);
-
-	error = fs_create_by_name (name, mode, parent, &dentry);
-	if (error) {
-		dentry = NULL;
-	} else {
-		if (dentry->d_inode) {
-			if (data)
-				dentry->d_inode->i_private = data;
-			if (fops)
-				dentry->d_inode->i_fop = fops;
-			dentry->d_inode->i_uid = uid;
-			dentry->d_inode->i_gid = gid;
-		}
-	}
-
-	return dentry;
-}
-
-static void fs_remove_file (struct dentry *dentry)
-{
-	struct dentry *parent = dentry->d_parent;
-	
-	if (!parent || !parent->d_inode)
-		return;
-
-	mutex_lock_nested(&parent->d_inode->i_mutex, I_MUTEX_PARENT);
-	if (usbfs_positive(dentry)) {
-		if (dentry->d_inode) {
-			if (S_ISDIR(dentry->d_inode->i_mode))
-				usbfs_rmdir(parent->d_inode, dentry);
-			else
-				usbfs_unlink(parent->d_inode, dentry);
-		dput(dentry);
-		}
-	}
-	mutex_unlock(&parent->d_inode->i_mutex);
-}
-
-/* --------------------------------------------------------------------- */
-
-static struct dentry *usb_mount(struct file_system_type *fs_type,
-	int flags, const char *dev_name, void *data)
-{
-	return mount_single(fs_type, flags, data, usbfs_fill_super);
-}
-
-static struct file_system_type usb_fs_type = {
-	.owner =	THIS_MODULE,
-	.name =		"usbfs",
-	.mount =	usb_mount,
-	.kill_sb =	kill_litter_super,
-};
-
-/* --------------------------------------------------------------------- */
-
-static int create_special_files (void)
-{
-	struct dentry *parent;
-	int retval;
-
-	/* create the devices special file */
-	retval = simple_pin_fs(&usb_fs_type, &usbfs_mount, &usbfs_mount_count);
-	if (retval) {
-		printk(KERN_ERR "Unable to get usbfs mount\n");
-		goto exit;
-	}
-
-	parent = usbfs_mount->mnt_root;
-	devices_usbfs_dentry = fs_create_file ("devices",
-					       listmode | S_IFREG, parent,
-					       NULL, &usbfs_devices_fops,
-					       listuid, listgid);
-	if (devices_usbfs_dentry == NULL) {
-		printk(KERN_ERR "Unable to create devices usbfs file\n");
-		retval = -ENODEV;
-		goto error_clean_mounts;
-	}
-
-	goto exit;
-	
-error_clean_mounts:
-	simple_release_fs(&usbfs_mount, &usbfs_mount_count);
-exit:
-	return retval;
-}
-
-static void remove_special_files (void)
-{
-	if (devices_usbfs_dentry)
-		fs_remove_file (devices_usbfs_dentry);
-	devices_usbfs_dentry = NULL;
-	simple_release_fs(&usbfs_mount, &usbfs_mount_count);
-}
-
-void usbfs_update_special (void)
-{
-	struct inode *inode;
-
-	if (devices_usbfs_dentry) {
-		inode = devices_usbfs_dentry->d_inode;
-		if (inode)
-			inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
-	}
-}
-
-static void usbfs_add_bus(struct usb_bus *bus)
-{
-	struct dentry *parent;
-	char name[8];
-	int retval;
-
-	/* create the special files if this is the first bus added */
-	if (num_buses == 0) {
-		retval = create_special_files();
-		if (retval)
-			return;
-	}
-	++num_buses;
-
-	sprintf (name, "%03d", bus->busnum);
-
-	parent = usbfs_mount->mnt_root;
-	bus->usbfs_dentry = fs_create_file (name, busmode | S_IFDIR, parent,
-					    bus, NULL, busuid, busgid);
-	if (bus->usbfs_dentry == NULL) {
-		printk(KERN_ERR "Error creating usbfs bus entry\n");
-		return;
-	}
-}
-
-static void usbfs_remove_bus(struct usb_bus *bus)
-{
-	if (bus->usbfs_dentry) {
-		fs_remove_file (bus->usbfs_dentry);
-		bus->usbfs_dentry = NULL;
-	}
-
-	--num_buses;
-	if (num_buses <= 0) {
-		remove_special_files();
-		num_buses = 0;
-	}
-}
-
-static void usbfs_add_device(struct usb_device *dev)
-{
-	char name[8];
-	int i;
-	int i_size;
-
-	sprintf (name, "%03d", dev->devnum);
-	dev->usbfs_dentry = fs_create_file (name, devmode | S_IFREG,
-					    dev->bus->usbfs_dentry, dev,
-					    &usbdev_file_operations,
-					    devuid, devgid);
-	if (dev->usbfs_dentry == NULL) {
-		printk(KERN_ERR "Error creating usbfs device entry\n");
-		return;
-	}
-
-	/* Set the size of the device's file to be
-	 * equal to the size of the device descriptors. */
-	i_size = sizeof (struct usb_device_descriptor);
-	for (i = 0; i < dev->descriptor.bNumConfigurations; ++i) {
-		struct usb_config_descriptor *config =
-			(struct usb_config_descriptor *)dev->rawdescriptors[i];
-		i_size += le16_to_cpu(config->wTotalLength);
-	}
-	if (dev->usbfs_dentry->d_inode)
-		dev->usbfs_dentry->d_inode->i_size = i_size;
-}
-
-static void usbfs_remove_device(struct usb_device *dev)
-{
-	if (dev->usbfs_dentry) {
-		fs_remove_file (dev->usbfs_dentry);
-		dev->usbfs_dentry = NULL;
-	}
-}
-
-static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
-{
-	switch (action) {
-	case USB_DEVICE_ADD:
-		usbfs_add_device(dev);
-		break;
-	case USB_DEVICE_REMOVE:
-		usbfs_remove_device(dev);
-		break;
-	case USB_BUS_ADD:
-		usbfs_add_bus(dev);
-		break;
-	case USB_BUS_REMOVE:
-		usbfs_remove_bus(dev);
-	}
-
-	usbfs_update_special();
-	usbfs_conn_disc_event();
-	return NOTIFY_OK;
-}
-
-static struct notifier_block usbfs_nb = {
-	.notifier_call = 	usbfs_notify,
-};
-
-/* --------------------------------------------------------------------- */
-
-static struct proc_dir_entry *usbdir = NULL;
-
-int __init usbfs_init(void)
-{
-	int retval;
-
-	retval = register_filesystem(&usb_fs_type);
-	if (retval)
-		return retval;
-
-	usb_register_notify(&usbfs_nb);
-
-	/* create mount point for usbfs */
-	usbdir = proc_mkdir("bus/usb", NULL);
-
-	return 0;
-}
-
-void usbfs_cleanup(void)
-{
-	usb_unregister_notify(&usbfs_nb);
-	unregister_filesystem(&usb_fs_type);
-	if (usbdir)
-		remove_proc_entry("bus/usb", NULL);
-}
-
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index ca717da3be95..b548cf1dbc62 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1308,10 +1308,19 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	 * Remove the current alt setting and add the new alt setting.
 	 */
 	mutex_lock(hcd->bandwidth_mutex);
+	/* Disable LPM, and re-enable it once the new alt setting is installed,
+	 * so that the xHCI driver can recalculate the U1/U2 timeouts.
+	 */
+	if (usb_disable_lpm(dev)) {
+		dev_err(&iface->dev, "%s Failed to disable LPM\n.", __func__);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return -ENOMEM;
+	}
 	ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt);
 	if (ret < 0) {
 		dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n",
 				alternate);
+		usb_enable_lpm(dev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		return ret;
 	}
@@ -1334,6 +1343,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	} else if (ret < 0) {
 		/* Re-instate the old alt setting */
 		usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting);
+		usb_enable_lpm(dev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		return ret;
 	}
@@ -1354,6 +1364,9 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 
 	iface->cur_altsetting = alt;
 
+	/* Now that the interface is installed, re-enable LPM. */
+	usb_unlocked_enable_lpm(dev);
+
 	/* If the interface only has one altsetting and the device didn't
 	 * accept the request, we attempt to carry out the equivalent action
 	 * by manually clearing the HALT feature for each endpoint in the
@@ -1437,6 +1450,14 @@ int usb_reset_configuration(struct usb_device *dev)
 	config = dev->actconfig;
 	retval = 0;
 	mutex_lock(hcd->bandwidth_mutex);
+	/* Disable LPM, and re-enable it once the configuration is reset, so
+	 * that the xHCI driver can recalculate the U1/U2 timeouts.
+	 */
+	if (usb_disable_lpm(dev)) {
+		dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return -ENOMEM;
+	}
 	/* Make sure we have enough bandwidth for each alternate setting 0 */
 	for (i = 0; i < config->desc.bNumInterfaces; i++) {
 		struct usb_interface *intf = config->interface[i];
@@ -1465,6 +1486,7 @@ reset_old_alts:
 				usb_hcd_alloc_bandwidth(dev, NULL,
 						alt, intf->cur_altsetting);
 		}
+		usb_enable_lpm(dev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		return retval;
 	}
@@ -1502,6 +1524,8 @@ reset_old_alts:
 			create_intf_ep_devs(intf);
 		}
 	}
+	/* Now that the interfaces are installed, re-enable LPM. */
+	usb_unlocked_enable_lpm(dev);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_reset_configuration);
@@ -1763,8 +1787,18 @@ free_interfaces:
 	 * this call fails, the device state is unchanged.
 	 */
 	mutex_lock(hcd->bandwidth_mutex);
+	/* Disable LPM, and re-enable it once the new configuration is
+	 * installed, so that the xHCI driver can recalculate the U1/U2
+	 * timeouts.
+	 */
+	if (usb_disable_lpm(dev)) {
+		dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return -ENOMEM;
+	}
 	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
 	if (ret < 0) {
+		usb_enable_lpm(dev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		usb_autosuspend_device(dev);
 		goto free_interfaces;
@@ -1784,6 +1818,7 @@ free_interfaces:
 	if (!cp) {
 		usb_set_device_state(dev, USB_STATE_ADDRESS);
 		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		usb_enable_lpm(dev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		usb_autosuspend_device(dev);
 		goto free_interfaces;
@@ -1838,6 +1873,9 @@ free_interfaces:
 			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
 		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
 
+	/* Now that the interfaces are installed, re-enable LPM. */
+	usb_unlocked_enable_lpm(dev);
+
 	/* Now that all the interfaces are set up, register them
 	 * to trigger binding of drivers to interfaces.  probe()
 	 * routines may install different altsettings and may
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 4c65eb6a867a..32d3adc315f5 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -123,6 +123,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Guillemot Webcam Hercules Dualpix Exchange*/
 	{ USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Midiman M-Audio Keystation 88es */
+	{ USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 566d9f94f735..9a56e3adf476 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -73,7 +73,7 @@ set_bConfigurationValue(struct device *dev, struct device_attribute *attr,
 	return (value < 0) ? value : count;
 }
 
-static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR_IGNORE_LOCKDEP(bConfigurationValue, S_IRUGO | S_IWUSR,
 		show_bConfigurationValue, set_bConfigurationValue);
 
 /* String fields */
@@ -595,7 +595,7 @@ static ssize_t usb_dev_authorized_store(struct device *dev,
 	return result < 0? result : size;
 }
 
-static DEVICE_ATTR(authorized, 0644,
+static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, 0644,
 	    usb_dev_authorized_show, usb_dev_authorized_store);
 
 /* "Safely remove a device" */
@@ -618,7 +618,7 @@ static ssize_t usb_remove_store(struct device *dev,
 	usb_unlock_device(udev);
 	return rc;
 }
-static DEVICE_ATTR(remove, 0200, NULL, usb_remove_store);
+static DEVICE_ATTR_IGNORE_LOCKDEP(remove, 0200, NULL, usb_remove_store);
 
 
 static struct attribute *dev_attrs[] = {
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index cd9b3a2cd8a7..9d912bfdcffe 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -681,6 +681,27 @@ void usb_unpoison_urb(struct urb *urb)
 EXPORT_SYMBOL_GPL(usb_unpoison_urb);
 
 /**
+ * usb_block_urb - reliably prevent further use of an URB
+ * @urb: pointer to URB to be blocked, may be NULL
+ *
+ * After the routine has run, attempts to resubmit the URB will fail
+ * with error -EPERM.  Thus even if the URB's completion handler always
+ * tries to resubmit, it will not succeed and the URB will become idle.
+ *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ */
+void usb_block_urb(struct urb *urb)
+{
+	if (!urb)
+		return;
+
+	atomic_inc(&urb->reject);
+}
+EXPORT_SYMBOL_GPL(usb_block_urb);
+
+/**
  * usb_kill_anchored_urbs - cancel transfer requests en masse
  * @anchor: anchor the requests are bound to
  *
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
new file mode 100644
index 000000000000..8947b203d5a4
--- /dev/null
+++ b/drivers/usb/core/usb-acpi.c
@@ -0,0 +1,117 @@
+/*
+ * USB-ACPI glue code
+ *
+ * Copyright 2012 Red Hat <mjg@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ */
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <acpi/acpi_bus.h>
+
+#include "usb.h"
+
+static int usb_acpi_check_upc(struct usb_device *udev, acpi_handle handle)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *upc;
+	int ret = 0;
+
+	status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer);
+
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	upc = buffer.pointer;
+
+	if (!upc || (upc->type != ACPI_TYPE_PACKAGE)
+		|| upc->package.count != 4) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (upc->package.elements[0].integer.value)
+		udev->removable = USB_DEVICE_REMOVABLE;
+	else
+		udev->removable = USB_DEVICE_FIXED;
+
+out:
+	kfree(upc);
+	return ret;
+}
+
+static int usb_acpi_check_pld(struct usb_device *udev, acpi_handle handle)
+{
+	acpi_status status;
+	struct acpi_pld pld;
+
+	status = acpi_get_physical_device_location(handle, &pld);
+
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	if (pld.user_visible)
+		udev->removable = USB_DEVICE_REMOVABLE;
+	else
+		udev->removable = USB_DEVICE_FIXED;
+
+	return 0;
+}
+
+static int usb_acpi_find_device(struct device *dev, acpi_handle *handle)
+{
+	struct usb_device *udev;
+	struct device *parent;
+	acpi_handle *parent_handle;
+
+	if (!is_usb_device(dev))
+		return -ENODEV;
+
+	udev = to_usb_device(dev);
+	parent = dev->parent;
+	parent_handle = DEVICE_ACPI_HANDLE(parent);
+
+	if (!parent_handle)
+		return -ENODEV;
+
+	*handle = acpi_get_child(parent_handle, udev->portnum);
+
+	if (!*handle)
+		return -ENODEV;
+
+	/*
+	 * PLD will tell us whether a port is removable to the user or
+	 * not. If we don't get an answer from PLD (it's not present
+	 * or it's malformed) then try to infer it from UPC. If a
+	 * device isn't connectable then it's probably not removable.
+	 */
+	if (usb_acpi_check_pld(udev, *handle) != 0)
+		usb_acpi_check_upc(udev, *handle);
+
+	return 0;
+}
+
+static struct acpi_bus_type usb_acpi_bus = {
+	.bus = &usb_bus_type,
+	.find_bridge = NULL,
+	.find_device = usb_acpi_find_device,
+};
+
+int usb_acpi_register(void)
+{
+	return register_acpi_bus_type(&usb_acpi_bus);
+}
+
+void usb_acpi_unregister(void)
+{
+	unregister_acpi_bus_type(&usb_acpi_bus);
+}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index c74ba7bbc748..25d0c61c3f8a 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1015,6 +1015,7 @@ static int __init usb_init(void)
 	if (retval)
 		goto out;
 
+	usb_acpi_register();
 	retval = bus_register(&usb_bus_type);
 	if (retval)
 		goto bus_register_failed;
@@ -1030,9 +1031,6 @@ static int __init usb_init(void)
 	retval = usb_devio_init();
 	if (retval)
 		goto usb_devio_init_failed;
-	retval = usbfs_init();
-	if (retval)
-		goto fs_init_failed;
 	retval = usb_hub_init();
 	if (retval)
 		goto hub_init_failed;
@@ -1042,8 +1040,6 @@ static int __init usb_init(void)
 
 	usb_hub_cleanup();
 hub_init_failed:
-	usbfs_cleanup();
-fs_init_failed:
 	usb_devio_cleanup();
 usb_devio_init_failed:
 	usb_deregister(&usbfs_driver);
@@ -1054,6 +1050,7 @@ major_init_failed:
 bus_notifier_failed:
 	bus_unregister(&usb_bus_type);
 bus_register_failed:
+	usb_acpi_unregister();
 	usb_debugfs_cleanup();
 out:
 	return retval;
@@ -1070,12 +1067,12 @@ static void __exit usb_exit(void)
 
 	usb_deregister_device_driver(&usb_generic_driver);
 	usb_major_cleanup();
-	usbfs_cleanup();
 	usb_deregister(&usbfs_driver);
 	usb_devio_cleanup();
 	usb_hub_cleanup();
 	bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
 	bus_unregister(&usb_bus_type);
+	usb_acpi_unregister();
 	usb_debugfs_cleanup();
 }
 
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 71648dcbe438..5c5c538ea73d 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -156,3 +156,10 @@ extern void usb_notify_remove_device(struct usb_device *udev);
 extern void usb_notify_add_bus(struct usb_bus *ubus);
 extern void usb_notify_remove_bus(struct usb_bus *ubus);
 
+#ifdef CONFIG_ACPI
+extern int usb_acpi_register(void);
+extern void usb_acpi_unregister(void);
+#else
+static inline int usb_acpi_register(void) { return 0; };
+static inline void usb_acpi_unregister(void) { };
+#endif
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index d8f741f9e56e..d13c60f42139 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -4,7 +4,7 @@ config USB_DWC3
 	select USB_OTG_UTILS
 	select USB_GADGET_DUALSPEED
 	select USB_GADGET_SUPERSPEED
-	select USB_XHCI_PLATFORM
+	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
 	help
 	  Say Y or M here if your system has a Dual Role SuperSpeed
 	  USB controller based on the DesignWare USB3 IP Core.
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 99b58d84553a..1040bdb8dc88 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -410,7 +410,6 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
 	struct device		*dev = &pdev->dev;
 
 	int			ret = -ENOMEM;
-	int			irq;
 
 	void __iomem		*regs;
 	void			*mem;
@@ -425,15 +424,28 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
 	dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1);
 	dwc->mem = mem;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!res) {
-		dev_err(dev, "missing resource\n");
+		dev_err(dev, "missing IRQ\n");
 		return -ENODEV;
 	}
+	dwc->xhci_resources[1] = *res;
 
-	dwc->res = res;
-
-	res = devm_request_mem_region(dev, res->start, resource_size(res),
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "missing memory resource\n");
+		return -ENODEV;
+	}
+	dwc->xhci_resources[0] = *res;
+	dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
+					DWC3_XHCI_REGS_END;
+
+	 /*
+	  * Request memory region but exclude xHCI regs,
+	  * since it will be requested by the xhci-plat driver.
+	  */
+	res = devm_request_mem_region(dev, res->start + DWC3_GLOBALS_REGS_START,
+			resource_size(res) - DWC3_GLOBALS_REGS_START,
 			dev_name(dev));
 	if (!res) {
 		dev_err(dev, "can't request mem region\n");
@@ -446,19 +458,12 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(dev, "missing IRQ\n");
-		return -ENODEV;
-	}
-
 	spin_lock_init(&dwc->lock);
 	platform_set_drvdata(pdev, dwc);
 
 	dwc->regs	= regs;
 	dwc->regs_size	= resource_size(res);
 	dwc->dev	= dev;
-	dwc->irq	= irq;
 
 	if (!strncmp("super", maximum_speed, 5))
 		dwc->maximum_speed = DWC3_DCFG_SUPERSPEED;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 6c7945b4cad3..f69c877add09 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -51,7 +51,9 @@
 #include <linux/usb/gadget.h>
 
 /* Global constants */
+#define DWC3_EP0_BOUNCE_SIZE	512
 #define DWC3_ENDPOINTS_NUM	32
+#define DWC3_XHCI_RESOURCES_NUM	2
 
 #define DWC3_EVENT_BUFFERS_SIZE	PAGE_SIZE
 #define DWC3_EVENT_TYPE_MASK	0xfe
@@ -75,6 +77,16 @@
 #define DWC3_GSNPSID_MASK	0xffff0000
 #define DWC3_GSNPSREV_MASK	0xffff
 
+/* DWC3 registers memory space boundries */
+#define DWC3_XHCI_REGS_START		0x0
+#define DWC3_XHCI_REGS_END		0x7fff
+#define DWC3_GLOBALS_REGS_START		0xc100
+#define DWC3_GLOBALS_REGS_END		0xc6ff
+#define DWC3_DEVICE_REGS_START		0xc700
+#define DWC3_DEVICE_REGS_END		0xcbff
+#define DWC3_OTG_REGS_START		0xcc00
+#define DWC3_OTG_REGS_END		0xccff
+
 /* Global Registers */
 #define DWC3_GSBUSCFG0		0xc100
 #define DWC3_GSBUSCFG1		0xc104
@@ -183,6 +195,7 @@
 #define DWC3_GHWPARAMS1_EN_PWROPT_CLK	1
 
 /* Device Configuration Register */
+#define DWC3_DCFG_LPM_CAP	(1 << 22)
 #define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
 #define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
 
@@ -272,12 +285,14 @@
 #define DWC3_DGCMD_SET_ENDPOINT_NRDY	0x0c
 #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK	0x10
 
+#define DWC3_DGCMD_STATUS(n)		(((n) >> 15) & 1)
+#define DWC3_DGCMD_CMDACT		(1 << 10)
+
 /* Device Endpoint Command Register */
 #define DWC3_DEPCMD_PARAM_SHIFT		16
 #define DWC3_DEPCMD_PARAM(x)		((x) << DWC3_DEPCMD_PARAM_SHIFT)
 #define DWC3_DEPCMD_GET_RSC_IDX(x)     (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
-#define DWC3_DEPCMD_STATUS_MASK		(0x0f << 12)
-#define DWC3_DEPCMD_STATUS(x)		(((x) & DWC3_DEPCMD_STATUS_MASK) >> 12)
+#define DWC3_DEPCMD_STATUS(x)		(((x) >> 15) & 1)
 #define DWC3_DEPCMD_HIPRI_FORCERM	(1 << 11)
 #define DWC3_DEPCMD_CMDACT		(1 << 10)
 #define DWC3_DEPCMD_CMDIOC		(1 << 8)
@@ -361,7 +376,6 @@ struct dwc3_ep {
 	dma_addr_t		trb_pool_dma;
 	u32			free_slot;
 	u32			busy_slot;
-	const struct usb_endpoint_descriptor *desc;
 	const struct usb_ss_ep_comp_descriptor *comp_desc;
 	struct dwc3		*dwc;
 
@@ -561,6 +575,11 @@ struct dwc3_request {
  * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
  * @needs_fifo_resize: not all users might want fifo resizing, flag it
  * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes.
+ * @isoch_delay: wValue from Set Isochronous Delay request;
+ * @u2sel: parameter from Set SEL request.
+ * @u2pel: parameter from Set SEL request.
+ * @u1sel: parameter from Set SEL request.
+ * @u1pel: parameter from Set SEL request.
  * @ep0_next_event: hold the next expected event
  * @ep0state: state of endpoint zero
  * @link_state: link state
@@ -583,7 +602,7 @@ struct dwc3 {
 	struct device		*dev;
 
 	struct platform_device	*xhci;
-	struct resource		*res;
+	struct resource		xhci_resources[DWC3_XHCI_RESOURCES_NUM];
 
 	struct dwc3_event_buffer **ev_buffs;
 	struct dwc3_ep		*eps[DWC3_ENDPOINTS_NUM];
@@ -594,8 +613,6 @@ struct dwc3 {
 	void __iomem		*regs;
 	size_t			regs_size;
 
-	int			irq;
-
 	u32			num_event_buffers;
 	u32			u1u2;
 	u32			maximum_speed;
@@ -609,6 +626,10 @@ struct dwc3 {
 #define DWC3_REVISION_185A	0x5533185a
 #define DWC3_REVISION_188A	0x5533188a
 #define DWC3_REVISION_190A	0x5533190a
+#define DWC3_REVISION_200A	0x5533200a
+#define DWC3_REVISION_202A	0x5533202a
+#define DWC3_REVISION_210A	0x5533210a
+#define DWC3_REVISION_220A	0x5533220a
 
 	unsigned		is_selfpowered:1;
 	unsigned		three_stage_setup:1;
@@ -625,7 +646,14 @@ struct dwc3 {
 	enum dwc3_link_state	link_state;
 	enum dwc3_device_state	dev_state;
 
+	u16			isoch_delay;
+	u16			u2sel;
+	u16			u2pel;
+	u8			u1sel;
+	u8			u1pel;
+
 	u8			speed;
+
 	void			*mem;
 
 	struct dwc3_hwparams	hwparams;
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index d7d9c0ec9515..479dc047da3a 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -49,7 +49,6 @@
 #include <linux/of.h>
 
 #include "core.h"
-#include "io.h"
 
 /*
  * All these registers belong to OMAP's Wrapper around the
@@ -143,6 +142,17 @@ struct dwc3_omap {
 	u32			dma_status:1;
 };
 
+static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+
 static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 {
 	struct dwc3_omap	*omap = _omap;
@@ -150,7 +160,7 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 
 	spin_lock(&omap->lock);
 
-	reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1);
+	reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_1);
 
 	if (reg & USBOTGSS_IRQ1_DMADISABLECLR) {
 		dev_dbg(omap->dev, "DMA Disable was Cleared\n");
@@ -184,10 +194,10 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 	if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL)
 		dev_dbg(omap->dev, "IDPULLUP Fall\n");
 
-	dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg);
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg);
 
-	reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_0);
-	dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg);
+	reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0);
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg);
 
 	spin_unlock(&omap->lock);
 
@@ -270,7 +280,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 	omap->base	= base;
 	omap->dwc3	= dwc3;
 
-	reg = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+	reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 
 	utmi_mode = of_get_property(node, "utmi-mode", &size);
 	if (utmi_mode && size == sizeof(*utmi_mode)) {
@@ -293,10 +303,10 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 		}
 	}
 
-	dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);
+	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);
 
 	/* check the DMA Status */
-	reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG);
+	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
 	omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);
 
 	/* Set No-Idle and No-Standby */
@@ -306,7 +316,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 	reg |= (USBOTGSS_SYSCONFIG_STANDBYMODE(USBOTGSS_STANDBYMODE_NO_STANDBY)
 		| USBOTGSS_SYSCONFIG_IDLEMODE(USBOTGSS_IDLEMODE_NO_IDLE));
 
-	dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
+	dwc3_omap_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
 
 	ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
 			"dwc3-omap", omap);
@@ -318,7 +328,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 
 	/* enable all IRQs */
 	reg = USBOTGSS_IRQO_COREIRQ_ST;
-	dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);
 
 	reg = (USBOTGSS_IRQ1_OEVT |
 			USBOTGSS_IRQ1_DRVVBUS_RISE |
@@ -330,7 +340,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
 			USBOTGSS_IRQ1_DISCHRGVBUS_FALL |
 			USBOTGSS_IRQ1_IDPULLUP_FALL);
 
-	dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
+	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);
 
 	ret = platform_device_add_resources(dwc3, pdev->resource,
 			pdev->num_resources);
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 3584a169886f..9e8a3dce69fd 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -179,7 +179,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 	int				ret;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-	if (!dep->desc) {
+	if (!dep->endpoint.desc) {
 		dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
 				request, dep->name);
 		ret = -ESHUTDOWN;
@@ -261,6 +261,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
 {
 	struct dwc3_ep		*dep;
 	u32			recip;
+	u32			reg;
 	u16			usb_status = 0;
 	__le16			*response_pkt;
 
@@ -268,10 +269,18 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
 	switch (recip) {
 	case USB_RECIP_DEVICE:
 		/*
-		 * We are self-powered. U1/U2/LTM will be set later
-		 * once we handle this states. RemoteWakeup is 0 on SS
+		 * LTM will be set once we know how to set this in HW.
 		 */
 		usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED;
+
+		if (dwc->speed == DWC3_DSTS_SUPERSPEED) {
+			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+			if (reg & DWC3_DCTL_INITU1ENA)
+				usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
+			if (reg & DWC3_DCTL_INITU2ENA)
+				usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
+		}
+
 		break;
 
 	case USB_RECIP_INTERFACE:
@@ -312,6 +321,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 	u32			recip;
 	u32			wValue;
 	u32			wIndex;
+	u32			reg;
 	int			ret;
 
 	wValue = le16_to_cpu(ctrl->wValue);
@@ -320,29 +330,43 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 	switch (recip) {
 	case USB_RECIP_DEVICE:
 
+		switch (wValue) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			break;
 		/*
 		 * 9.4.1 says only only for SS, in AddressState only for
 		 * default control pipe
 		 */
-		switch (wValue) {
 		case USB_DEVICE_U1_ENABLE:
-		case USB_DEVICE_U2_ENABLE:
-		case USB_DEVICE_LTM_ENABLE:
 			if (dwc->dev_state != DWC3_CONFIGURED_STATE)
 				return -EINVAL;
 			if (dwc->speed != DWC3_DSTS_SUPERSPEED)
 				return -EINVAL;
-		}
 
-		/* XXX add U[12] & LTM */
-		switch (wValue) {
-		case USB_DEVICE_REMOTE_WAKEUP:
-			break;
-		case USB_DEVICE_U1_ENABLE:
+			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+			if (set)
+				reg |= DWC3_DCTL_INITU1ENA;
+			else
+				reg &= ~DWC3_DCTL_INITU1ENA;
+			dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 			break;
+
 		case USB_DEVICE_U2_ENABLE:
+			if (dwc->dev_state != DWC3_CONFIGURED_STATE)
+				return -EINVAL;
+			if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+				return -EINVAL;
+
+			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+			if (set)
+				reg |= DWC3_DCTL_INITU2ENA;
+			else
+				reg &= ~DWC3_DCTL_INITU2ENA;
+			dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 			break;
+
 		case USB_DEVICE_LTM_ENABLE:
+			return -EINVAL;
 			break;
 
 		case USB_DEVICE_TEST_MODE:
@@ -469,6 +493,107 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 	return ret;
 }
 
+static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
+{
+	struct dwc3_ep	*dep = to_dwc3_ep(ep);
+	struct dwc3	*dwc = dep->dwc;
+
+	u32		param = 0;
+	u32		reg;
+
+	struct timing {
+		u8	u1sel;
+		u8	u1pel;
+		u16	u2sel;
+		u16	u2pel;
+	} __packed timing;
+
+	int		ret;
+
+	memcpy(&timing, req->buf, sizeof(timing));
+
+	dwc->u1sel = timing.u1sel;
+	dwc->u1pel = timing.u1pel;
+	dwc->u2sel = timing.u2sel;
+	dwc->u2pel = timing.u2pel;
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	if (reg & DWC3_DCTL_INITU2ENA)
+		param = dwc->u2pel;
+	if (reg & DWC3_DCTL_INITU1ENA)
+		param = dwc->u1pel;
+
+	/*
+	 * According to Synopsys Databook, if parameter is
+	 * greater than 125, a value of zero should be
+	 * programmed in the register.
+	 */
+	if (param > 125)
+		param = 0;
+
+	/* now that we have the time, issue DGCMD Set Sel */
+	ret = dwc3_send_gadget_generic_command(dwc,
+			DWC3_DGCMD_SET_PERIODIC_PAR, param);
+	WARN_ON(ret < 0);
+}
+
+static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	struct dwc3_ep	*dep;
+	u16		wLength;
+	u16		wValue;
+
+	if (dwc->dev_state == DWC3_DEFAULT_STATE)
+		return -EINVAL;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	wLength = le16_to_cpu(ctrl->wLength);
+
+	if (wLength != 6) {
+		dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
+				wLength);
+		return -EINVAL;
+	}
+
+	/*
+	 * To handle Set SEL we need to receive 6 bytes from Host. So let's
+	 * queue a usb_request for 6 bytes.
+	 *
+	 * Remember, though, this controller can't handle non-wMaxPacketSize
+	 * aligned transfers on the OUT direction, so we queue a request for
+	 * wMaxPacketSize instead.
+	 */
+	dep = dwc->eps[0];
+	dwc->ep0_usb_req.dep = dep;
+	dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
+	dwc->ep0_usb_req.request.buf = dwc->setup_buf;
+	dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
+
+	return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
+}
+
+static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+	u16		wLength;
+	u16		wValue;
+	u16		wIndex;
+
+	wValue = le16_to_cpu(ctrl->wValue);
+	wLength = le16_to_cpu(ctrl->wLength);
+	wIndex = le16_to_cpu(ctrl->wIndex);
+
+	if (wIndex || wLength)
+		return -EINVAL;
+
+	/*
+	 * REVISIT It's unclear from Databook what to do with this
+	 * value. For now, just cache it.
+	 */
+	dwc->isoch_delay = wValue;
+
+	return 0;
+}
+
 static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
 	int ret;
@@ -494,6 +619,14 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 		dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n");
 		ret = dwc3_ep0_set_config(dwc, ctrl);
 		break;
+	case USB_REQ_SET_SEL:
+		dev_vdbg(dwc->dev, "USB_REQ_SET_SEL\n");
+		ret = dwc3_ep0_set_sel(dwc, ctrl);
+		break;
+	case USB_REQ_SET_ISOCH_DELAY:
+		dev_vdbg(dwc->dev, "USB_REQ_SET_ISOCH_DELAY\n");
+		ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
+		break;
 	default:
 		dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 5255fe975ea1..3df1a1973b05 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -178,8 +178,8 @@ int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
 		if (!(dep->flags & DWC3_EP_ENABLED))
 			continue;
 
-		if (usb_endpoint_xfer_bulk(dep->desc)
-				|| usb_endpoint_xfer_isoc(dep->desc))
+		if (usb_endpoint_xfer_bulk(dep->endpoint.desc)
+				|| usb_endpoint_xfer_isoc(dep->endpoint.desc))
 			mult = 3;
 
 		/*
@@ -229,7 +229,7 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 		 * completed (not the LINK TRB).
 		 */
 		if (((dep->busy_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
-				usb_endpoint_xfer_isoc(dep->desc))
+				usb_endpoint_xfer_isoc(dep->endpoint.desc))
 			dep->busy_slot++;
 	}
 	list_del(&req->list);
@@ -276,6 +276,33 @@ static const char *dwc3_gadget_ep_cmd_string(u8 cmd)
 	}
 }
 
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param)
+{
+	u32		timeout = 500;
+	u32		reg;
+
+	dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
+	dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
+
+	do {
+		reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
+		if (!(reg & DWC3_DGCMD_CMDACT)) {
+			dev_vdbg(dwc->dev, "Command Complete --> %d\n",
+					DWC3_DGCMD_STATUS(reg));
+			return 0;
+		}
+
+		/*
+		 * We can't sleep here, because it's also called from
+		 * interrupt context.
+		 */
+		timeout--;
+		if (!timeout)
+			return -ETIMEDOUT;
+		udelay(1);
+	} while (1);
+}
+
 int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
 {
@@ -470,7 +497,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 		if (ret)
 			return ret;
 
-		dep->desc = desc;
+		dep->endpoint.desc = desc;
 		dep->comp_desc = comp_desc;
 		dep->type = usb_endpoint_type(desc);
 		dep->flags |= DWC3_EP_ENABLED;
@@ -533,7 +560,6 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 	dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 
 	dep->stream_capable = false;
-	dep->desc = NULL;
 	dep->endpoint.desc = NULL;
 	dep->comp_desc = NULL;
 	dep->type = 0;
@@ -694,7 +720,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 
 	/* Skip the LINK-TRB on ISOC */
 	if (((cur_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
-			usb_endpoint_xfer_isoc(dep->desc))
+			usb_endpoint_xfer_isoc(dep->endpoint.desc))
 		return;
 
 	if (!req->trb) {
@@ -707,7 +733,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 	trb->bpl = lower_32_bits(dma);
 	trb->bph = upper_32_bits(dma);
 
-	switch (usb_endpoint_type(dep->desc)) {
+	switch (usb_endpoint_type(dep->endpoint.desc)) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP;
 		break;
@@ -732,7 +758,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 		BUG();
 	}
 
-	if (usb_endpoint_xfer_isoc(dep->desc)) {
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 		trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 		trb->ctrl |= DWC3_TRB_CTRL_CSP;
 	} else {
@@ -743,7 +769,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 			trb->ctrl |= DWC3_TRB_CTRL_LST;
 	}
 
-	if (usb_endpoint_xfer_bulk(dep->desc) && dep->stream_capable)
+	if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
 		trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id);
 
 	trb->ctrl |= DWC3_TRB_CTRL_HWO;
@@ -771,7 +797,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 	trbs_left = (dep->busy_slot - dep->free_slot) & DWC3_TRB_MASK;
 
 	/* Can't wrap around on a non-isoc EP since there's no link TRB */
-	if (!usb_endpoint_xfer_isoc(dep->desc)) {
+	if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 		max = DWC3_TRB_NUM - (dep->free_slot & DWC3_TRB_MASK);
 		if (trbs_left > max)
 			trbs_left = max;
@@ -797,7 +823,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 		 * processed from the first TRB until the last one. Since we
 		 * don't wrap around we have to start at the beginning.
 		 */
-		if (usb_endpoint_xfer_isoc(dep->desc)) {
+		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 			dep->busy_slot = 1;
 			dep->free_slot = 1;
 		} else {
@@ -807,7 +833,7 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
 	}
 
 	/* The last TRB is a link TRB, not used for xfer */
-	if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->desc))
+	if ((trbs_left <= 1) && usb_endpoint_xfer_isoc(dep->endpoint.desc))
 		return;
 
 	list_for_each_entry_safe(req, n, &dep->request_list, list) {
@@ -930,10 +956,12 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
 	}
 
 	dep->flags |= DWC3_EP_BUSY;
-	dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
-			dep->number);
 
-	WARN_ON_ONCE(!dep->res_trans_idx);
+	if (start_new) {
+		dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
+				dep->number);
+		WARN_ON_ONCE(!dep->res_trans_idx);
+	}
 
 	return 0;
 }
@@ -967,28 +995,37 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 
 	list_add_tail(&req->list, &dep->request_list);
 
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && (dep->flags & DWC3_EP_BUSY))
+		dep->flags |= DWC3_EP_PENDING_REQUEST;
+
 	/*
-	 * There is one special case: XferNotReady with
-	 * empty list of requests. We need to kick the
-	 * transfer here in that situation, otherwise
-	 * we will be NAKing forever.
+	 * There are two special cases:
+	 *
+	 * 1. XferNotReady with empty list of requests. We need to kick the
+	 *    transfer here in that situation, otherwise we will be NAKing
+	 *    forever. If we get XferNotReady before gadget driver has a
+	 *    chance to queue a request, we will ACK the IRQ but won't be
+	 *    able to receive the data until the next request is queued.
+	 *    The following code is handling exactly that.
 	 *
-	 * If we get XferNotReady before gadget driver
-	 * has a chance to queue a request, we will ACK
-	 * the IRQ but won't be able to receive the data
-	 * until the next request is queued. The following
-	 * code is handling exactly that.
+	 * 2. XferInProgress on Isoc EP with an active transfer. We need to
+	 *    kick the transfer here after queuing a request, otherwise the
+	 *    core may not see the modified TRB(s).
 	 */
 	if (dep->flags & DWC3_EP_PENDING_REQUEST) {
-		int ret;
-		int start_trans;
+		int	ret;
+		int	start_trans = 1;
+		u8	trans_idx = dep->res_trans_idx;
 
-		start_trans = 1;
-		if (usb_endpoint_xfer_isoc(dep->desc) &&
-				(dep->flags & DWC3_EP_BUSY))
+		if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+				(dep->flags & DWC3_EP_BUSY)) {
 			start_trans = 0;
+			WARN_ON_ONCE(!trans_idx);
+		} else {
+			trans_idx = 0;
+		}
 
-		ret = __dwc3_gadget_kick_transfer(dep, 0, start_trans);
+		ret = __dwc3_gadget_kick_transfer(dep, trans_idx, start_trans);
 		if (ret && ret != -EBUSY) {
 			struct dwc3	*dwc = dep->dwc;
 
@@ -1011,7 +1048,7 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
 
 	int				ret;
 
-	if (!dep->desc) {
+	if (!dep->endpoint.desc) {
 		dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
 				request, ep->name);
 		return -ESHUTDOWN;
@@ -1125,7 +1162,7 @@ static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
-	if (usb_endpoint_xfer_isoc(dep->desc)) {
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 		dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
 		ret = -EINVAL;
 		goto out;
@@ -1356,7 +1393,24 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 	reg &= ~(DWC3_DCFG_SPEED_MASK);
-	reg |= dwc->maximum_speed;
+
+	/**
+	 * WORKAROUND: DWC3 revision < 2.20a have an issue
+	 * which would cause metastability state on Run/Stop
+	 * bit if we try to force the IP to USB2-only mode.
+	 *
+	 * Because of that, we cannot configure the IP to any
+	 * speed other than the SuperSpeed
+	 *
+	 * Refers to:
+	 *
+	 * STAR#9000525659: Clock Domain Crossing on DCTL in
+	 * USB 2.0 Mode
+	 */
+	if (dwc->revision < DWC3_REVISION_220A)
+		reg |= DWC3_DCFG_SUPERSPEED;
+	else
+		reg |= dwc->maximum_speed;
 	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
 
 	dwc->start_config_issued = false;
@@ -1681,7 +1735,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 	case DWC3_DEPEVT_XFERCOMPLETE:
 		dep->res_trans_idx = 0;
 
-		if (usb_endpoint_xfer_isoc(dep->desc)) {
+		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 			dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
 					dep->name);
 			return;
@@ -1690,7 +1744,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 		dwc3_endpoint_transfer_complete(dwc, dep, event, 1);
 		break;
 	case DWC3_DEPEVT_XFERINPROGRESS:
-		if (!usb_endpoint_xfer_isoc(dep->desc)) {
+		if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 			dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n",
 					dep->name);
 			return;
@@ -1699,7 +1753,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 		dwc3_endpoint_transfer_complete(dwc, dep, event, 0);
 		break;
 	case DWC3_DEPEVT_XFERNOTREADY:
-		if (usb_endpoint_xfer_isoc(dep->desc)) {
+		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 			dwc3_gadget_start_isoc(dwc, dep, event);
 		} else {
 			int ret;
@@ -1720,7 +1774,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 
 		break;
 	case DWC3_DEPEVT_STREAMEVT:
-		if (!usb_endpoint_xfer_bulk(dep->desc)) {
+		if (!usb_endpoint_xfer_bulk(dep->endpoint.desc)) {
 			dev_err(dwc->dev, "Stream event for non-Bulk %s\n",
 					dep->name);
 			return;
@@ -1916,6 +1970,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg &= ~DWC3_DCTL_TSTCTRL_MASK;
+	reg &= ~(DWC3_DCTL_INITU1ENA | DWC3_DCTL_INITU2ENA);
 	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 	dwc->test_mode = false;
 
@@ -2263,8 +2318,7 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
 		goto err1;
 	}
 
-	dwc->setup_buf = kzalloc(sizeof(*dwc->setup_buf) * 2,
-			GFP_KERNEL);
+	dwc->setup_buf = kzalloc(DWC3_EP0_BOUNCE_SIZE, GFP_KERNEL);
 	if (!dwc->setup_buf) {
 		dev_err(dwc->dev, "failed to allocate setup buffer\n");
 		ret = -ENOMEM;
@@ -2272,7 +2326,8 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
 	}
 
 	dwc->ep0_bounce = dma_alloc_coherent(dwc->dev,
-			512, &dwc->ep0_bounce_addr, GFP_KERNEL);
+			DWC3_EP0_BOUNCE_SIZE, &dwc->ep0_bounce_addr,
+			GFP_KERNEL);
 	if (!dwc->ep0_bounce) {
 		dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
 		ret = -ENOMEM;
@@ -2313,6 +2368,14 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
 		goto err5;
 	}
 
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg |= DWC3_DCFG_LPM_CAP;
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+	reg |= DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA;
+	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
 	/* Enable all but Start and End of Frame IRQs */
 	reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
 			DWC3_DEVTEN_EVNTOVERFLOWEN |
@@ -2351,8 +2414,8 @@ err5:
 	dwc3_gadget_free_endpoints(dwc);
 
 err4:
-	dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
-			dwc->ep0_bounce_addr);
+	dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
+			dwc->ep0_bounce, dwc->ep0_bounce_addr);
 
 err3:
 	kfree(dwc->setup_buf);
@@ -2381,8 +2444,8 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 
 	dwc3_gadget_free_endpoints(dwc);
 
-	dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
-			dwc->ep0_bounce_addr);
+	dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
+			dwc->ep0_bounce, dwc->ep0_bounce_addr);
 
 	kfree(dwc->setup_buf);
 
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index a8600084348c..95ef6a2f7764 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -111,6 +111,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
 int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param);
 
 /**
  * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index b108d18fd40d..56a62342884d 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -39,15 +39,6 @@
 
 #include "core.h"
 
-static struct resource generic_resources[] = {
-	{
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.flags = IORESOURCE_MEM,
-	},
-};
-
 int dwc3_host_init(struct dwc3 *dwc)
 {
 	struct platform_device	*xhci;
@@ -68,14 +59,8 @@ int dwc3_host_init(struct dwc3 *dwc)
 
 	dwc->xhci = xhci;
 
-	/* setup resources */
-	generic_resources[0].start = dwc->irq;
-
-	generic_resources[1].start = dwc->res->start;
-	generic_resources[1].end = dwc->res->start + 0x7fff;
-
-	ret = platform_device_add_resources(xhci, generic_resources,
-			ARRAY_SIZE(generic_resources));
+	ret = platform_device_add_resources(xhci, dwc->xhci_resources,
+						DWC3_XHCI_RESOURCES_NUM);
 	if (ret) {
 		dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
 		goto err1;
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
index 071d561f3e68..a50f76b9d19b 100644
--- a/drivers/usb/dwc3/io.h
+++ b/drivers/usb/dwc3/io.h
@@ -41,14 +41,26 @@
 
 #include <linux/io.h>
 
+#include "core.h"
+
 static inline u32 dwc3_readl(void __iomem *base, u32 offset)
 {
-	return readl(base + offset);
+	/*
+	 * We requested the mem region starting from the Globals address
+	 * space, see dwc3_probe in core.c.
+	 * However, the offsets are given starting from xHCI address space.
+	 */
+	return readl(base + (offset - DWC3_GLOBALS_REGS_START));
 }
 
 static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value)
 {
-	writel(value, base + offset);
+	/*
+	 * We requested the mem region starting from the Globals address
+	 * space, see dwc3_probe in core.c.
+	 * However, the offsets are given starting from xHCI address space.
+	 */
+	writel(value, base + (offset - DWC3_GLOBALS_REGS_START));
 }
 
 #endif /* __DRIVERS_USB_DWC3_IO_H */
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 569b33e754ba..bddc8fd9a7be 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -123,13 +123,7 @@ config USB_GADGET_STORAGE_NUM_BUFFERS
 #   - discrete ones (including all PCI-only controllers)
 #   - debug/dummy gadget+hcd is last.
 #
-choice
-	prompt "USB Peripheral Controller"
-	help
-	   A USB device uses a controller to talk to its host.
-	   Systems should have only one such upstream link.
-	   Many controller drivers are platform-specific; these
-	   often need board-specific hooks.
+menu "USB Peripheral Controller"
 
 #
 # Integrated controllers
@@ -147,6 +141,17 @@ config USB_AT91
 	   dynamically linked module called "at91_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
+config USB_LPC32XX
+	tristate "LPC32XX USB Peripheral Controller"
+	depends on ARCH_LPC32XX
+	select USB_ISP1301
+	help
+	   This option selects the USB device controller in the LPC32xx SoC.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "lpc32xx_udc" and force all
+	   gadget drivers to also be dynamically linked.
+
 config USB_ATMEL_USBA
 	tristate "Atmel USBA"
 	select USB_GADGET_DUALSPEED
@@ -161,7 +166,7 @@ config USB_FSL_USB2
 	select USB_GADGET_DUALSPEED
 	select USB_FSL_MPH_DR_OF if OF
 	help
-	   Some of Freescale PowerPC processors have a High Speed
+	   Some of Freescale PowerPC and i.MX processors have a High Speed
 	   Dual-Role(DR) USB controller, which supports device mode.
 
 	   The number of programmable endpoints is different through
@@ -373,18 +378,6 @@ config USB_FSL_QE
 	   Set CONFIG_USB_GADGET to "m" to build this driver as a
 	   dynamically linked module called "fsl_qe_udc".
 
-config USB_CI13XXX_PCI
-	tristate "MIPS USB CI13xxx PCI UDC"
-	depends on PCI
-	select USB_GADGET_DUALSPEED
-	help
-	  MIPS USB IP core family device controller
-	  Currently it only supports IP part number CI13412
-
-	  Say "y" to link the driver statically, or "m" to build a
-	  dynamically linked module called "ci13xxx_udc" and force all
-	  gadget drivers to also be dynamically linked.
-
 config USB_NET2272
 	tristate "PLX NET2272"
 	select USB_GADGET_DUALSPEED
@@ -438,22 +431,6 @@ config USB_GOKU
 	   dynamically linked module called "goku_udc" and to force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_LANGWELL
-	tristate "Intel Langwell USB Device Controller"
-	depends on PCI
-	depends on !PHYS_ADDR_T_64BIT
-	select USB_GADGET_DUALSPEED
-	help
-	   Intel Langwell USB Device Controller is a High-Speed USB
-	   On-The-Go device controller.
-
-	   The number of programmable endpoints is different through
-	   controller revision.
-
-	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "langwell_udc" and force all
-	   gadget drivers to also be dynamically linked.
-
 config USB_EG20T
 	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 	depends on PCI
@@ -477,23 +454,6 @@ config USB_EG20T
 	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
 	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
-config USB_CI13XXX_MSM
-	tristate "MIPS USB CI13xxx for MSM"
-	depends on ARCH_MSM
-	select USB_GADGET_DUALSPEED
-	select USB_MSM_OTG
-	help
-	  MSM SoC has chipidea USB controller.  This driver uses
-	  ci13xxx_udc core.
-	  This driver depends on OTG driver for PHY initialization,
-	  clock management, powering up VBUS, and power management.
-	  This driver is not supported on boards like trout which
-	  has an external PHY.
-
-	  Say "y" to link the driver statically, or "m" to build a
-	  dynamically linked module called "ci13xxx_msm" and force all
-	  gadget drivers to also be dynamically linked.
-
 #
 # LAST -- dummy/emulated controller
 #
@@ -525,7 +485,7 @@ config USB_DUMMY_HCD
 # NOTE:  Please keep dummy_hcd LAST so that "real hardware" appears
 # first and will be selected by default.
 
-endchoice
+endmenu
 
 # Selected by UDC drivers that support high-speed operation.
 config USB_GADGET_DUALSPEED
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index fc5b83683de5..1811513f1c27 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -22,14 +22,12 @@ fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
-obj-$(CONFIG_USB_CI13XXX_PCI)	+= ci13xxx_pci.o
 obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
 obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
-obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
+obj-$(CONFIG_USB_LPC32XX)	+= lpc32xx_udc.o
 obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
 obj-$(CONFIG_USB_MV_UDC)	+= mv_udc.o
 mv_udc-y			:= mv_udc_core.o
-obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 
 #
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 77779271f487..187d21181cd5 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -333,7 +333,7 @@ udc_ep_enable(struct usb_ep *usbep, const struct usb_endpoint_descriptor *desc)
 		return -ESHUTDOWN;
 
 	spin_lock_irqsave(&dev->lock, iflags);
-	ep->desc = desc;
+	ep->ep.desc = desc;
 
 	ep->halted = 0;
 
@@ -442,7 +442,6 @@ static void ep_init(struct udc_regs __iomem *regs, struct udc_ep *ep)
 	u32		tmp;
 
 	VDBG(ep->dev, "ep-%d reset\n", ep->num);
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 	ep->ep.ops = &udc_ep_ops;
 	INIT_LIST_HEAD(&ep->queue);
@@ -489,7 +488,7 @@ static int udc_ep_disable(struct usb_ep *usbep)
 		return -EINVAL;
 
 	ep = container_of(usbep, struct udc_ep, ep);
-	if (usbep->name == ep0_string || !ep->desc)
+	if (usbep->name == ep0_string || !ep->ep.desc)
 		return -EINVAL;
 
 	DBG(ep->dev, "Disable ep-%d\n", ep->num);
@@ -1066,7 +1065,7 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp)
 		return -EINVAL;
 
 	ep = container_of(usbep, struct udc_ep, ep);
-	if (!ep->desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX))
+	if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX))
 		return -EINVAL;
 
 	VDBG(ep->dev, "udc_queue(): ep%d-in=%d\n", ep->num, ep->in);
@@ -1257,7 +1256,7 @@ static int udc_dequeue(struct usb_ep *usbep, struct usb_request *usbreq)
 	unsigned long		iflags;
 
 	ep = container_of(usbep, struct udc_ep, ep);
-	if (!usbep || !usbreq || (!ep->desc && (ep->num != 0
+	if (!usbep || !usbreq || (!ep->ep.desc && (ep->num != 0
 				&& ep->num != UDC_EP0OUT_IX)))
 		return -EINVAL;
 
@@ -1317,7 +1316,7 @@ udc_set_halt(struct usb_ep *usbep, int halt)
 	pr_debug("set_halt %s: halt=%d\n", usbep->name, halt);
 
 	ep = container_of(usbep, struct udc_ep, ep);
-	if (!ep->desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX))
+	if (!ep->ep.desc && (ep->num != 0 && ep->num != UDC_EP0OUT_IX))
 		return -EINVAL;
 	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
 		return -ESHUTDOWN;
@@ -1539,7 +1538,7 @@ static void udc_setup_endpoints(struct udc *dev)
 		 * disabling ep interrupts when ENUM interrupt occurs but ep is
 		 * not enabled by gadget driver
 		 */
-		if (!ep->desc)
+		if (!ep->ep.desc)
 			ep_init(dev->regs, ep);
 
 		if (use_dma) {
@@ -3402,19 +3401,7 @@ static struct pci_driver udc_pci_driver = {
 	.remove =	udc_pci_remove,
 };
 
-/* Inits driver */
-static int __init init(void)
-{
-	return pci_register_driver(&udc_pci_driver);
-}
-module_init(init);
-
-/* Cleans driver */
-static void __exit cleanup(void)
-{
-	pci_unregister_driver(&udc_pci_driver);
-}
-module_exit(cleanup);
+module_pci_driver(udc_pci_driver);
 
 MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
 MODULE_AUTHOR("Thomas Dahlmann");
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index f87e29c65325..14af87d65caa 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -512,7 +512,6 @@ struct udc_ep {
 
 	/* queue for requests */
 	struct list_head		queue;
-	const struct usb_endpoint_descriptor	*desc;
 	unsigned			halted;
 	unsigned			cancel_transfer;
 	unsigned			num : 5,
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 9d7bcd910074..1a4430f315c3 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -212,7 +212,7 @@ static int proc_udc_show(struct seq_file *s, void *unused)
 	if (udc->enabled && udc->vbus) {
 		proc_ep_show(s, &udc->ep[0]);
 		list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
-			if (ep->desc)
+			if (ep->ep.desc)
 				proc_ep_show(s, ep);
 		}
 	}
@@ -475,7 +475,7 @@ static int at91_ep_enable(struct usb_ep *_ep,
 	unsigned long	flags;
 
 	if (!_ep || !ep
-			|| !desc || ep->desc
+			|| !desc || ep->ep.desc
 			|| _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| (maxpacket = usb_endpoint_maxp(desc)) == 0
@@ -530,7 +530,7 @@ ok:
 	tmp |= AT91_UDP_EPEDS;
 	__raw_writel(tmp, ep->creg);
 
-	ep->desc = desc;
+	ep->ep.desc = desc;
 	ep->ep.maxpacket = maxpacket;
 
 	/*
@@ -558,7 +558,6 @@ static int at91_ep_disable (struct usb_ep * _ep)
 	nuke(ep, -ESHUTDOWN);
 
 	/* restore the endpoint's pristine config */
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 	ep->ep.maxpacket = ep->maxpacket;
 
@@ -618,7 +617,7 @@ static int at91_ep_queue(struct usb_ep *_ep,
 		return -EINVAL;
 	}
 
-	if (!_ep || (!ep->desc && ep->ep.name != ep0name)) {
+	if (!_ep || (!ep->ep.desc && ep->ep.name != ep0name)) {
 		DBG("invalid ep\n");
 		return -EINVAL;
 	}
@@ -833,7 +832,7 @@ static void udc_reinit(struct at91_udc *udc)
 
 		if (i != 0)
 			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
-		ep->desc = NULL;
+		ep->ep.desc = NULL;
 		ep->stopped = 0;
 		ep->fifo_bank = 0;
 		ep->ep.maxpacket = ep->maxpacket;
@@ -978,18 +977,18 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
-static int at91_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int at91_stop(struct usb_gadget_driver *driver);
-
+static int at91_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
+static int at91_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
 static const struct usb_gadget_ops at91_udc_ops = {
 	.get_frame		= at91_get_frame,
 	.wakeup			= at91_wakeup,
 	.set_selfpowered	= at91_set_selfpowered,
 	.vbus_session		= at91_vbus_session,
 	.pullup			= at91_pullup,
-	.start			= at91_start,
-	.stop			= at91_stop,
+	.udc_start		= at91_start,
+	.udc_stop		= at91_stop,
 
 	/*
 	 * VBUS-powered devices may also also want to support bigger
@@ -1172,7 +1171,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 			| USB_REQ_GET_STATUS:
 		tmp = w_index & USB_ENDPOINT_NUMBER_MASK;
 		ep = &udc->ep[tmp];
-		if (tmp >= NUM_ENDPOINTS || (tmp && !ep->desc))
+		if (tmp >= NUM_ENDPOINTS || (tmp && !ep->ep.desc))
 			goto stall;
 
 		if (tmp) {
@@ -1197,7 +1196,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 		ep = &udc->ep[tmp];
 		if (w_value != USB_ENDPOINT_HALT || tmp >= NUM_ENDPOINTS)
 			goto stall;
-		if (!ep->desc || ep->is_iso)
+		if (!ep->ep.desc || ep->is_iso)
 			goto stall;
 		if ((w_index & USB_DIR_IN)) {
 			if (!ep->is_in)
@@ -1218,7 +1217,7 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 			goto stall;
 		if (tmp == 0)
 			goto succeed;
-		if (!ep->desc || ep->is_iso)
+		if (!ep->ep.desc || ep->is_iso)
 			goto stall;
 		if ((w_index & USB_DIR_IN)) {
 			if (!ep->is_in)
@@ -1627,66 +1626,34 @@ static void at91_vbus_timer(unsigned long data)
 		schedule_work(&udc->vbus_timer_work);
 }
 
-static int at91_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int at91_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct at91_udc	*udc = &controller;
-	int		retval;
-	unsigned long	flags;
-
-	if (!driver
-			|| driver->max_speed < USB_SPEED_FULL
-			|| !bind
-			|| !driver->setup) {
-		DBG("bad parameter.\n");
-		return -EINVAL;
-	}
-
-	if (udc->driver) {
-		DBG("UDC already has a gadget driver\n");
-		return -EBUSY;
-	}
+	struct at91_udc	*udc;
 
+	udc = container_of(gadget, struct at91_udc, gadget);
 	udc->driver = driver;
 	udc->gadget.dev.driver = &driver->driver;
 	dev_set_drvdata(&udc->gadget.dev, &driver->driver);
 	udc->enabled = 1;
 	udc->selfpowered = 1;
 
-	retval = bind(&udc->gadget);
-	if (retval) {
-		DBG("bind() returned %d\n", retval);
-		udc->driver = NULL;
-		udc->gadget.dev.driver = NULL;
-		dev_set_drvdata(&udc->gadget.dev, NULL);
-		udc->enabled = 0;
-		udc->selfpowered = 0;
-		return retval;
-	}
-
-	spin_lock_irqsave(&udc->lock, flags);
-	pullup(udc, 1);
-	spin_unlock_irqrestore(&udc->lock, flags);
-
 	DBG("bound to %s\n", driver->driver.name);
 	return 0;
 }
 
-static int at91_stop(struct usb_gadget_driver *driver)
+static int at91_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct at91_udc *udc = &controller;
+	struct at91_udc *udc;
 	unsigned long	flags;
 
-	if (!driver || driver != udc->driver || !driver->unbind)
-		return -EINVAL;
-
+	udc = container_of(gadget, struct at91_udc, gadget);
 	spin_lock_irqsave(&udc->lock, flags);
 	udc->enabled = 0;
 	at91_udp_write(udc, AT91_UDP_IDR, ~0);
-	pullup(udc, 0);
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	driver->unbind(&udc->gadget);
 	udc->gadget.dev.driver = NULL;
 	dev_set_drvdata(&udc->gadget.dev, NULL);
 	udc->driver = NULL;
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index 3c0315b86ace..e647d1c2ada4 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -105,9 +105,6 @@ struct at91_ep {
 	unsigned			is_in:1;
 	unsigned			is_iso:1;
 	unsigned			fifo_bank:1;
-
-	const struct usb_endpoint_descriptor
-					*desc;
 };
 
 /*
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 9f98508966d1..e23bf7984aaf 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -599,13 +599,13 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 
 	spin_lock_irqsave(&ep->udc->lock, flags);
 
-	if (ep->desc) {
+	if (ep->ep.desc) {
 		spin_unlock_irqrestore(&ep->udc->lock, flags);
 		DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
 		return -EBUSY;
 	}
 
-	ep->desc = desc;
+	ep->ep.desc = desc;
 	ep->ep.maxpacket = maxpacket;
 
 	usba_ep_writel(ep, CFG, ept_cfg);
@@ -647,7 +647,7 @@ static int usba_ep_disable(struct usb_ep *_ep)
 
 	spin_lock_irqsave(&udc->lock, flags);
 
-	if (!ep->desc) {
+	if (!ep->ep.desc) {
 		spin_unlock_irqrestore(&udc->lock, flags);
 		/* REVISIT because this driver disables endpoints in
 		 * reset_all_endpoints() before calling disconnect(),
@@ -658,7 +658,6 @@ static int usba_ep_disable(struct usb_ep *_ep)
 					ep->ep.name);
 		return -EINVAL;
 	}
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 
 	list_splice_init(&ep->queue, &req_list);
@@ -752,7 +751,7 @@ static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
 	 */
 	ret = -ESHUTDOWN;
 	spin_lock_irqsave(&udc->lock, flags);
-	if (ep->desc) {
+	if (ep->ep.desc) {
 		if (list_empty(&ep->queue))
 			submit_request(ep, req);
 
@@ -776,7 +775,8 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n",
 			ep->ep.name, req, _req->length);
 
-	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc)
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN ||
+	    !ep->ep.desc)
 		return -ESHUTDOWN;
 
 	req->submitted = 0;
@@ -792,7 +792,7 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	/* May have received a reset since last time we checked */
 	ret = -ESHUTDOWN;
 	spin_lock_irqsave(&udc->lock, flags);
-	if (ep->desc) {
+	if (ep->ep.desc) {
 		list_add_tail(&req->queue, &ep->queue);
 
 		if ((!ep_is_control(ep) && ep->is_in) ||
@@ -905,7 +905,7 @@ static int usba_ep_set_halt(struct usb_ep *_ep, int value)
 	DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name,
 			value ? "set" : "clear");
 
-	if (!ep->desc) {
+	if (!ep->ep.desc) {
 		DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
 				ep->ep.name);
 		return -ENODEV;
@@ -1008,16 +1008,16 @@ usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
 	return 0;
 }
 
-static int atmel_usba_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int atmel_usba_stop(struct usb_gadget_driver *driver);
-
+static int atmel_usba_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
+static int atmel_usba_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
 static const struct usb_gadget_ops usba_udc_ops = {
 	.get_frame		= usba_udc_get_frame,
 	.wakeup			= usba_udc_wakeup,
 	.set_selfpowered	= usba_udc_set_selfpowered,
-	.start			= atmel_usba_start,
-	.stop			= atmel_usba_stop,
+	.udc_start		= atmel_usba_start,
+	.udc_stop		= atmel_usba_stop,
 };
 
 static struct usb_endpoint_descriptor usba_ep0_desc = {
@@ -1071,7 +1071,7 @@ static void reset_all_endpoints(struct usba_udc *udc)
 	 * FIXME remove this code ... and retest thoroughly.
 	 */
 	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
-		if (ep->desc) {
+		if (ep->ep.desc) {
 			spin_unlock(&udc->lock);
 			usba_ep_disable(&ep->ep);
 			spin_lock(&udc->lock);
@@ -1089,9 +1089,9 @@ static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
 	list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
 		u8 bEndpointAddress;
 
-		if (!ep->desc)
+		if (!ep->ep.desc)
 			continue;
-		bEndpointAddress = ep->desc->bEndpointAddress;
+		bEndpointAddress = ep->ep.desc->bEndpointAddress;
 		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
 			continue;
 		if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
@@ -1727,7 +1727,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 		    usb_speed_string(udc->gadget.speed));
 
 		ep0 = &usba_ep[0];
-		ep0->desc = &usba_ep0_desc;
+		ep0->ep.desc = &usba_ep0_desc;
 		ep0->state = WAIT_FOR_SETUP;
 		usba_ep_writel(ep0, CFG,
 				(USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
@@ -1795,21 +1795,13 @@ out:
 	return IRQ_HANDLED;
 }
 
-static int atmel_usba_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int atmel_usba_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct usba_udc *udc = &the_udc;
+	struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
 	unsigned long flags;
-	int ret;
-
-	if (!udc->pdev)
-		return -ENODEV;
 
 	spin_lock_irqsave(&udc->lock, flags);
-	if (udc->driver) {
-		spin_unlock_irqrestore(&udc->lock, flags);
-		return -EBUSY;
-	}
 
 	udc->devstatus = 1 << USB_DEVICE_SELF_POWERED;
 	udc->driver = driver;
@@ -1819,13 +1811,6 @@ static int atmel_usba_start(struct usb_gadget_driver *driver,
 	clk_enable(udc->pclk);
 	clk_enable(udc->hclk);
 
-	ret = bind(&udc->gadget);
-	if (ret) {
-		DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
-			driver->driver.name, ret);
-		goto err_driver_bind;
-	}
-
 	DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
 
 	udc->vbus_prev = 0;
@@ -1842,23 +1827,14 @@ static int atmel_usba_start(struct usb_gadget_driver *driver,
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	return 0;
-
-err_driver_bind:
-	udc->driver = NULL;
-	udc->gadget.dev.driver = NULL;
-	return ret;
 }
 
-static int atmel_usba_stop(struct usb_gadget_driver *driver)
+static int atmel_usba_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct usba_udc *udc = &the_udc;
+	struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
 	unsigned long flags;
 
-	if (!udc->pdev)
-		return -ENODEV;
-	if (driver != udc->driver || !driver->unbind)
-		return -EINVAL;
-
 	if (gpio_is_valid(udc->vbus_pin))
 		disable_irq(gpio_to_irq(udc->vbus_pin));
 
@@ -1871,10 +1847,6 @@ static int atmel_usba_stop(struct usb_gadget_driver *driver)
 	toggle_bias(0);
 	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
 
-	if (udc->driver->disconnect)
-		udc->driver->disconnect(&udc->gadget);
-
-	driver->unbind(&udc->gadget);
 	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index 88a2e07a11a8..9791259cbda7 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -280,7 +280,6 @@ struct usba_ep {
 	struct usba_udc				*udc;
 
 	struct list_head			queue;
-	const struct usb_endpoint_descriptor	*desc;
 
 	u16					fifo_size;
 	u8					nr_banks;
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
deleted file mode 100644
index 243ef1adf969..000000000000
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ /dev/null
@@ -1,2996 +0,0 @@
-/*
- * ci13xxx_udc.c - MIPS USB IP core family device controller
- *
- * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
- *
- * Author: David Lopo
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Description: MIPS USB IP core family device controller
- *              Currently it only supports IP part number CI13412
- *
- * This driver is composed of several blocks:
- * - HW:     hardware interface
- * - DBG:    debug facilities (optional)
- * - UTIL:   utilities
- * - ISR:    interrupts handling
- * - ENDPT:  endpoint operations (Gadget API)
- * - GADGET: gadget operations (Gadget API)
- * - BUS:    bus glue code, bus abstraction layer
- *
- * Compile Options
- * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
- * - STALL_IN:  non-empty bulk-in pipes cannot be halted
- *              if defined mass storage compliance succeeds but with warnings
- *              => case 4: Hi >  Dn
- *              => case 5: Hi >  Di
- *              => case 8: Hi <> Do
- *              if undefined usbtest 13 fails
- * - TRACE:     enable function tracing (depends on DEBUG)
- *
- * Main Features
- * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
- * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
- * - Normal & LPM support
- *
- * USBTEST Report
- * - OK: 0-12, 13 (STALL_IN defined) & 14
- * - Not Supported: 15 & 16 (ISO)
- *
- * TODO List
- * - OTG
- * - Isochronous & Interrupt Traffic
- * - Handle requests which spawns into several TDs
- * - GET_STATUS(device) - always reports 0
- * - Gadget API (majority of optional features)
- * - Suspend & Remote Wakeup
- */
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/dmapool.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/otg.h>
-
-#include "ci13xxx_udc.h"
-
-
-/******************************************************************************
- * DEFINE
- *****************************************************************************/
-
-#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
-
-/* ctrl register bank access */
-static DEFINE_SPINLOCK(udc_lock);
-
-/* control endpoint description */
-static const struct usb_endpoint_descriptor
-ctrl_endpt_out_desc = {
-	.bLength         = USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType = USB_DT_ENDPOINT,
-
-	.bEndpointAddress = USB_DIR_OUT,
-	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
-	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
-};
-
-static const struct usb_endpoint_descriptor
-ctrl_endpt_in_desc = {
-	.bLength         = USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType = USB_DT_ENDPOINT,
-
-	.bEndpointAddress = USB_DIR_IN,
-	.bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
-	.wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
-};
-
-/* UDC descriptor */
-static struct ci13xxx *_udc;
-
-/* Interrupt statistics */
-#define ISR_MASK   0x1F
-static struct {
-	u32 test;
-	u32 ui;
-	u32 uei;
-	u32 pci;
-	u32 uri;
-	u32 sli;
-	u32 none;
-	struct {
-		u32 cnt;
-		u32 buf[ISR_MASK+1];
-		u32 idx;
-	} hndl;
-} isr_statistics;
-
-/**
- * ffs_nr: find first (least significant) bit set
- * @x: the word to search
- *
- * This function returns bit number (instead of position)
- */
-static int ffs_nr(u32 x)
-{
-	int n = ffs(x);
-
-	return n ? n-1 : 32;
-}
-
-/******************************************************************************
- * HW block
- *****************************************************************************/
-/* register bank descriptor */
-static struct {
-	unsigned      lpm;    /* is LPM? */
-	void __iomem *abs;    /* bus map offset */
-	void __iomem *cap;    /* bus map offset + CAP offset + CAP data */
-	size_t        size;   /* bank size */
-} hw_bank;
-
-/* MSM specific */
-#define ABS_AHBBURST        (0x0090UL)
-#define ABS_AHBMODE         (0x0098UL)
-/* UDC register map */
-#define ABS_CAPLENGTH       (0x100UL)
-#define ABS_HCCPARAMS       (0x108UL)
-#define ABS_DCCPARAMS       (0x124UL)
-#define ABS_TESTMODE        (hw_bank.lpm ? 0x0FCUL : 0x138UL)
-/* offset to CAPLENTGH (addr + data) */
-#define CAP_USBCMD          (0x000UL)
-#define CAP_USBSTS          (0x004UL)
-#define CAP_USBINTR         (0x008UL)
-#define CAP_DEVICEADDR      (0x014UL)
-#define CAP_ENDPTLISTADDR   (0x018UL)
-#define CAP_PORTSC          (0x044UL)
-#define CAP_DEVLC           (0x084UL)
-#define CAP_USBMODE         (hw_bank.lpm ? 0x0C8UL : 0x068UL)
-#define CAP_ENDPTSETUPSTAT  (hw_bank.lpm ? 0x0D8UL : 0x06CUL)
-#define CAP_ENDPTPRIME      (hw_bank.lpm ? 0x0DCUL : 0x070UL)
-#define CAP_ENDPTFLUSH      (hw_bank.lpm ? 0x0E0UL : 0x074UL)
-#define CAP_ENDPTSTAT       (hw_bank.lpm ? 0x0E4UL : 0x078UL)
-#define CAP_ENDPTCOMPLETE   (hw_bank.lpm ? 0x0E8UL : 0x07CUL)
-#define CAP_ENDPTCTRL       (hw_bank.lpm ? 0x0ECUL : 0x080UL)
-#define CAP_LAST            (hw_bank.lpm ? 0x12CUL : 0x0C0UL)
-
-/* maximum number of enpoints: valid only after hw_device_reset() */
-static unsigned hw_ep_max;
-
-/**
- * hw_ep_bit: calculates the bit number
- * @num: endpoint number
- * @dir: endpoint direction
- *
- * This function returns bit number
- */
-static inline int hw_ep_bit(int num, int dir)
-{
-	return num + (dir ? 16 : 0);
-}
-
-static int ep_to_bit(int n)
-{
-	int fill = 16 - hw_ep_max / 2;
-
-	if (n >= hw_ep_max / 2)
-		n += fill;
-
-	return n;
-}
-
-/**
- * hw_aread: reads from register bitfield
- * @addr: address relative to bus map
- * @mask: bitfield mask
- *
- * This function returns register bitfield data
- */
-static u32 hw_aread(u32 addr, u32 mask)
-{
-	return ioread32(addr + hw_bank.abs) & mask;
-}
-
-/**
- * hw_awrite: writes to register bitfield
- * @addr: address relative to bus map
- * @mask: bitfield mask
- * @data: new data
- */
-static void hw_awrite(u32 addr, u32 mask, u32 data)
-{
-	iowrite32(hw_aread(addr, ~mask) | (data & mask),
-		  addr + hw_bank.abs);
-}
-
-/**
- * hw_cread: reads from register bitfield
- * @addr: address relative to CAP offset plus content
- * @mask: bitfield mask
- *
- * This function returns register bitfield data
- */
-static u32 hw_cread(u32 addr, u32 mask)
-{
-	return ioread32(addr + hw_bank.cap) & mask;
-}
-
-/**
- * hw_cwrite: writes to register bitfield
- * @addr: address relative to CAP offset plus content
- * @mask: bitfield mask
- * @data: new data
- */
-static void hw_cwrite(u32 addr, u32 mask, u32 data)
-{
-	iowrite32(hw_cread(addr, ~mask) | (data & mask),
-		  addr + hw_bank.cap);
-}
-
-/**
- * hw_ctest_and_clear: tests & clears register bitfield
- * @addr: address relative to CAP offset plus content
- * @mask: bitfield mask
- *
- * This function returns register bitfield data
- */
-static u32 hw_ctest_and_clear(u32 addr, u32 mask)
-{
-	u32 reg = hw_cread(addr, mask);
-
-	iowrite32(reg, addr + hw_bank.cap);
-	return reg;
-}
-
-/**
- * hw_ctest_and_write: tests & writes register bitfield
- * @addr: address relative to CAP offset plus content
- * @mask: bitfield mask
- * @data: new data
- *
- * This function returns register bitfield data
- */
-static u32 hw_ctest_and_write(u32 addr, u32 mask, u32 data)
-{
-	u32 reg = hw_cread(addr, ~0);
-
-	iowrite32((reg & ~mask) | (data & mask), addr + hw_bank.cap);
-	return (reg & mask) >> ffs_nr(mask);
-}
-
-static int hw_device_init(void __iomem *base)
-{
-	u32 reg;
-
-	/* bank is a module variable */
-	hw_bank.abs = base;
-
-	hw_bank.cap = hw_bank.abs;
-	hw_bank.cap += ABS_CAPLENGTH;
-	hw_bank.cap += ioread8(hw_bank.cap);
-
-	reg = hw_aread(ABS_HCCPARAMS, HCCPARAMS_LEN) >> ffs_nr(HCCPARAMS_LEN);
-	hw_bank.lpm  = reg;
-	hw_bank.size = hw_bank.cap - hw_bank.abs;
-	hw_bank.size += CAP_LAST;
-	hw_bank.size /= sizeof(u32);
-
-	reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN);
-	hw_ep_max = reg * 2;   /* cache hw ENDPT_MAX */
-
-	if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX)
-		return -ENODEV;
-
-	/* setup lock mode ? */
-
-	/* ENDPTSETUPSTAT is '0' by default */
-
-	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
-
-	return 0;
-}
-/**
- * hw_device_reset: resets chip (execute without interruption)
- * @base: register base address
- *
- * This function returns an error code
- */
-static int hw_device_reset(struct ci13xxx *udc)
-{
-	/* should flush & stop before reset */
-	hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0);
-	hw_cwrite(CAP_USBCMD, USBCMD_RS, 0);
-
-	hw_cwrite(CAP_USBCMD, USBCMD_RST, USBCMD_RST);
-	while (hw_cread(CAP_USBCMD, USBCMD_RST))
-		udelay(10);             /* not RTOS friendly */
-
-
-	if (udc->udc_driver->notify_event)
-		udc->udc_driver->notify_event(udc,
-			CI13XXX_CONTROLLER_RESET_EVENT);
-
-	if (udc->udc_driver->flags & CI13XXX_DISABLE_STREAMING)
-		hw_cwrite(CAP_USBMODE, USBMODE_SDIS, USBMODE_SDIS);
-
-	/* USBMODE should be configured step by step */
-	hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
-	hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE);
-	hw_cwrite(CAP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);  /* HW >= 2.3 */
-
-	if (hw_cread(CAP_USBMODE, USBMODE_CM) != USBMODE_CM_DEVICE) {
-		pr_err("cannot enter in device mode");
-		pr_err("lpm = %i", hw_bank.lpm);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-/**
- * hw_device_state: enables/disables interrupts & starts/stops device (execute
- *                  without interruption)
- * @dma: 0 => disable, !0 => enable and set dma engine
- *
- * This function returns an error code
- */
-static int hw_device_state(u32 dma)
-{
-	if (dma) {
-		hw_cwrite(CAP_ENDPTLISTADDR, ~0, dma);
-		/* interrupt, error, port change, reset, sleep/suspend */
-		hw_cwrite(CAP_USBINTR, ~0,
-			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
-		hw_cwrite(CAP_USBCMD, USBCMD_RS, USBCMD_RS);
-	} else {
-		hw_cwrite(CAP_USBCMD, USBCMD_RS, 0);
-		hw_cwrite(CAP_USBINTR, ~0, 0);
-	}
-	return 0;
-}
-
-/**
- * hw_ep_flush: flush endpoint fifo (execute without interruption)
- * @num: endpoint number
- * @dir: endpoint direction
- *
- * This function returns an error code
- */
-static int hw_ep_flush(int num, int dir)
-{
-	int n = hw_ep_bit(num, dir);
-
-	do {
-		/* flush any pending transfer */
-		hw_cwrite(CAP_ENDPTFLUSH, BIT(n), BIT(n));
-		while (hw_cread(CAP_ENDPTFLUSH, BIT(n)))
-			cpu_relax();
-	} while (hw_cread(CAP_ENDPTSTAT, BIT(n)));
-
-	return 0;
-}
-
-/**
- * hw_ep_disable: disables endpoint (execute without interruption)
- * @num: endpoint number
- * @dir: endpoint direction
- *
- * This function returns an error code
- */
-static int hw_ep_disable(int num, int dir)
-{
-	hw_ep_flush(num, dir);
-	hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32),
-		  dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
-	return 0;
-}
-
-/**
- * hw_ep_enable: enables endpoint (execute without interruption)
- * @num:  endpoint number
- * @dir:  endpoint direction
- * @type: endpoint type
- *
- * This function returns an error code
- */
-static int hw_ep_enable(int num, int dir, int type)
-{
-	u32 mask, data;
-
-	if (dir) {
-		mask  = ENDPTCTRL_TXT;  /* type    */
-		data  = type << ffs_nr(mask);
-
-		mask |= ENDPTCTRL_TXS;  /* unstall */
-		mask |= ENDPTCTRL_TXR;  /* reset data toggle */
-		data |= ENDPTCTRL_TXR;
-		mask |= ENDPTCTRL_TXE;  /* enable  */
-		data |= ENDPTCTRL_TXE;
-	} else {
-		mask  = ENDPTCTRL_RXT;  /* type    */
-		data  = type << ffs_nr(mask);
-
-		mask |= ENDPTCTRL_RXS;  /* unstall */
-		mask |= ENDPTCTRL_RXR;  /* reset data toggle */
-		data |= ENDPTCTRL_RXR;
-		mask |= ENDPTCTRL_RXE;  /* enable  */
-		data |= ENDPTCTRL_RXE;
-	}
-	hw_cwrite(CAP_ENDPTCTRL + num * sizeof(u32), mask, data);
-	return 0;
-}
-
-/**
- * hw_ep_get_halt: return endpoint halt status
- * @num: endpoint number
- * @dir: endpoint direction
- *
- * This function returns 1 if endpoint halted
- */
-static int hw_ep_get_halt(int num, int dir)
-{
-	u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
-
-	return hw_cread(CAP_ENDPTCTRL + num * sizeof(u32), mask) ? 1 : 0;
-}
-
-/**
- * hw_test_and_clear_setup_status: test & clear setup status (execute without
- *                                 interruption)
- * @n: endpoint number
- *
- * This function returns setup status
- */
-static int hw_test_and_clear_setup_status(int n)
-{
-	n = ep_to_bit(n);
-	return hw_ctest_and_clear(CAP_ENDPTSETUPSTAT, BIT(n));
-}
-
-/**
- * hw_ep_prime: primes endpoint (execute without interruption)
- * @num:     endpoint number
- * @dir:     endpoint direction
- * @is_ctrl: true if control endpoint
- *
- * This function returns an error code
- */
-static int hw_ep_prime(int num, int dir, int is_ctrl)
-{
-	int n = hw_ep_bit(num, dir);
-
-	if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num)))
-		return -EAGAIN;
-
-	hw_cwrite(CAP_ENDPTPRIME, BIT(n), BIT(n));
-
-	while (hw_cread(CAP_ENDPTPRIME, BIT(n)))
-		cpu_relax();
-	if (is_ctrl && dir == RX  && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num)))
-		return -EAGAIN;
-
-	/* status shoult be tested according with manual but it doesn't work */
-	return 0;
-}
-
-/**
- * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
- *                 without interruption)
- * @num:   endpoint number
- * @dir:   endpoint direction
- * @value: true => stall, false => unstall
- *
- * This function returns an error code
- */
-static int hw_ep_set_halt(int num, int dir, int value)
-{
-	if (value != 0 && value != 1)
-		return -EINVAL;
-
-	do {
-		u32 addr = CAP_ENDPTCTRL + num * sizeof(u32);
-		u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
-		u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
-
-		/* data toggle - reserved for EP0 but it's in ESS */
-		hw_cwrite(addr, mask_xs|mask_xr, value ? mask_xs : mask_xr);
-
-	} while (value != hw_ep_get_halt(num, dir));
-
-	return 0;
-}
-
-/**
- * hw_intr_clear: disables interrupt & clears interrupt status (execute without
- *                interruption)
- * @n: interrupt bit
- *
- * This function returns an error code
- */
-static int hw_intr_clear(int n)
-{
-	if (n >= REG_BITS)
-		return -EINVAL;
-
-	hw_cwrite(CAP_USBINTR, BIT(n), 0);
-	hw_cwrite(CAP_USBSTS,  BIT(n), BIT(n));
-	return 0;
-}
-
-/**
- * hw_intr_force: enables interrupt & forces interrupt status (execute without
- *                interruption)
- * @n: interrupt bit
- *
- * This function returns an error code
- */
-static int hw_intr_force(int n)
-{
-	if (n >= REG_BITS)
-		return -EINVAL;
-
-	hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE);
-	hw_cwrite(CAP_USBINTR,  BIT(n), BIT(n));
-	hw_cwrite(CAP_USBSTS,   BIT(n), BIT(n));
-	hw_awrite(ABS_TESTMODE, TESTMODE_FORCE, 0);
-	return 0;
-}
-
-/**
- * hw_is_port_high_speed: test if port is high speed
- *
- * This function returns true if high speed port
- */
-static int hw_port_is_high_speed(void)
-{
-	return hw_bank.lpm ? hw_cread(CAP_DEVLC, DEVLC_PSPD) :
-		hw_cread(CAP_PORTSC, PORTSC_HSP);
-}
-
-/**
- * hw_port_test_get: reads port test mode value
- *
- * This function returns port test mode value
- */
-static u8 hw_port_test_get(void)
-{
-	return hw_cread(CAP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC);
-}
-
-/**
- * hw_port_test_set: writes port test mode (execute without interruption)
- * @mode: new value
- *
- * This function returns an error code
- */
-static int hw_port_test_set(u8 mode)
-{
-	const u8 TEST_MODE_MAX = 7;
-
-	if (mode > TEST_MODE_MAX)
-		return -EINVAL;
-
-	hw_cwrite(CAP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC));
-	return 0;
-}
-
-/**
- * hw_read_intr_enable: returns interrupt enable register
- *
- * This function returns register data
- */
-static u32 hw_read_intr_enable(void)
-{
-	return hw_cread(CAP_USBINTR, ~0);
-}
-
-/**
- * hw_read_intr_status: returns interrupt status register
- *
- * This function returns register data
- */
-static u32 hw_read_intr_status(void)
-{
-	return hw_cread(CAP_USBSTS, ~0);
-}
-
-/**
- * hw_register_read: reads all device registers (execute without interruption)
- * @buf:  destination buffer
- * @size: buffer size
- *
- * This function returns number of registers read
- */
-static size_t hw_register_read(u32 *buf, size_t size)
-{
-	unsigned i;
-
-	if (size > hw_bank.size)
-		size = hw_bank.size;
-
-	for (i = 0; i < size; i++)
-		buf[i] = hw_aread(i * sizeof(u32), ~0);
-
-	return size;
-}
-
-/**
- * hw_register_write: writes to register
- * @addr: register address
- * @data: register value
- *
- * This function returns an error code
- */
-static int hw_register_write(u16 addr, u32 data)
-{
-	/* align */
-	addr /= sizeof(u32);
-
-	if (addr >= hw_bank.size)
-		return -EINVAL;
-
-	/* align */
-	addr *= sizeof(u32);
-
-	hw_awrite(addr, ~0, data);
-	return 0;
-}
-
-/**
- * hw_test_and_clear_complete: test & clear complete status (execute without
- *                             interruption)
- * @n: endpoint number
- *
- * This function returns complete status
- */
-static int hw_test_and_clear_complete(int n)
-{
-	n = ep_to_bit(n);
-	return hw_ctest_and_clear(CAP_ENDPTCOMPLETE, BIT(n));
-}
-
-/**
- * hw_test_and_clear_intr_active: test & clear active interrupts (execute
- *                                without interruption)
- *
- * This function returns active interrutps
- */
-static u32 hw_test_and_clear_intr_active(void)
-{
-	u32 reg = hw_read_intr_status() & hw_read_intr_enable();
-
-	hw_cwrite(CAP_USBSTS, ~0, reg);
-	return reg;
-}
-
-/**
- * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
- *                                interruption)
- *
- * This function returns guard value
- */
-static int hw_test_and_clear_setup_guard(void)
-{
-	return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, 0);
-}
-
-/**
- * hw_test_and_set_setup_guard: test & set setup guard (execute without
- *                              interruption)
- *
- * This function returns guard value
- */
-static int hw_test_and_set_setup_guard(void)
-{
-	return hw_ctest_and_write(CAP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
-}
-
-/**
- * hw_usb_set_address: configures USB address (execute without interruption)
- * @value: new USB address
- *
- * This function returns an error code
- */
-static int hw_usb_set_address(u8 value)
-{
-	/* advance */
-	hw_cwrite(CAP_DEVICEADDR, DEVICEADDR_USBADR | DEVICEADDR_USBADRA,
-		  value << ffs_nr(DEVICEADDR_USBADR) | DEVICEADDR_USBADRA);
-	return 0;
-}
-
-/**
- * hw_usb_reset: restart device after a bus reset (execute without
- *               interruption)
- *
- * This function returns an error code
- */
-static int hw_usb_reset(void)
-{
-	hw_usb_set_address(0);
-
-	/* ESS flushes only at end?!? */
-	hw_cwrite(CAP_ENDPTFLUSH,    ~0, ~0);   /* flush all EPs */
-
-	/* clear setup token semaphores */
-	hw_cwrite(CAP_ENDPTSETUPSTAT, 0,  0);   /* writes its content */
-
-	/* clear complete status */
-	hw_cwrite(CAP_ENDPTCOMPLETE,  0,  0);   /* writes its content */
-
-	/* wait until all bits cleared */
-	while (hw_cread(CAP_ENDPTPRIME, ~0))
-		udelay(10);             /* not RTOS friendly */
-
-	/* reset all endpoints ? */
-
-	/* reset internal status and wait for further instructions
-	   no need to verify the port reset status (ESS does it) */
-
-	return 0;
-}
-
-/******************************************************************************
- * DBG block
- *****************************************************************************/
-/**
- * show_device: prints information about device capabilities and status
- *
- * Check "device.h" for details
- */
-static ssize_t show_device(struct device *dev, struct device_attribute *attr,
-			   char *buf)
-{
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	struct usb_gadget *gadget = &udc->gadget;
-	int n = 0;
-
-	dbg_trace("[%s] %p\n", __func__, buf);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		return 0;
-	}
-
-	n += scnprintf(buf + n, PAGE_SIZE - n, "speed             = %d\n",
-		       gadget->speed);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed         = %d\n",
-		       gadget->max_speed);
-	/* TODO: Scheduled for removal in 3.8. */
-	n += scnprintf(buf + n, PAGE_SIZE - n, "is_dualspeed      = %d\n",
-		       gadget_is_dualspeed(gadget));
-	n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg            = %d\n",
-		       gadget->is_otg);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral   = %d\n",
-		       gadget->is_a_peripheral);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "b_hnp_enable      = %d\n",
-		       gadget->b_hnp_enable);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "a_hnp_support     = %d\n",
-		       gadget->a_hnp_support);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "a_alt_hnp_support = %d\n",
-		       gadget->a_alt_hnp_support);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "name              = %s\n",
-		       (gadget->name ? gadget->name : ""));
-
-	return n;
-}
-static DEVICE_ATTR(device, S_IRUSR, show_device, NULL);
-
-/**
- * show_driver: prints information about attached gadget (if any)
- *
- * Check "device.h" for details
- */
-static ssize_t show_driver(struct device *dev, struct device_attribute *attr,
-			   char *buf)
-{
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	struct usb_gadget_driver *driver = udc->driver;
-	int n = 0;
-
-	dbg_trace("[%s] %p\n", __func__, buf);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		return 0;
-	}
-
-	if (driver == NULL)
-		return scnprintf(buf, PAGE_SIZE,
-				 "There is no gadget attached!\n");
-
-	n += scnprintf(buf + n, PAGE_SIZE - n, "function  = %s\n",
-		       (driver->function ? driver->function : ""));
-	n += scnprintf(buf + n, PAGE_SIZE - n, "max speed = %d\n",
-		       driver->max_speed);
-
-	return n;
-}
-static DEVICE_ATTR(driver, S_IRUSR, show_driver, NULL);
-
-/* Maximum event message length */
-#define DBG_DATA_MSG   64UL
-
-/* Maximum event messages */
-#define DBG_DATA_MAX   128UL
-
-/* Event buffer descriptor */
-static struct {
-	char     (buf[DBG_DATA_MAX])[DBG_DATA_MSG];   /* buffer */
-	unsigned idx;   /* index */
-	unsigned tty;   /* print to console? */
-	rwlock_t lck;   /* lock */
-} dbg_data = {
-	.idx = 0,
-	.tty = 0,
-	.lck = __RW_LOCK_UNLOCKED(lck)
-};
-
-/**
- * dbg_dec: decrements debug event index
- * @idx: buffer index
- */
-static void dbg_dec(unsigned *idx)
-{
-	*idx = (*idx - 1) & (DBG_DATA_MAX-1);
-}
-
-/**
- * dbg_inc: increments debug event index
- * @idx: buffer index
- */
-static void dbg_inc(unsigned *idx)
-{
-	*idx = (*idx + 1) & (DBG_DATA_MAX-1);
-}
-
-/**
- * dbg_print:  prints the common part of the event
- * @addr:   endpoint address
- * @name:   event name
- * @status: status
- * @extra:  extra information
- */
-static void dbg_print(u8 addr, const char *name, int status, const char *extra)
-{
-	struct timeval tval;
-	unsigned int stamp;
-	unsigned long flags;
-
-	write_lock_irqsave(&dbg_data.lck, flags);
-
-	do_gettimeofday(&tval);
-	stamp = tval.tv_sec & 0xFFFF;	/* 2^32 = 4294967296. Limit to 4096s */
-	stamp = stamp * 1000000 + tval.tv_usec;
-
-	scnprintf(dbg_data.buf[dbg_data.idx], DBG_DATA_MSG,
-		  "%04X\t? %02X %-7.7s %4i ?\t%s\n",
-		  stamp, addr, name, status, extra);
-
-	dbg_inc(&dbg_data.idx);
-
-	write_unlock_irqrestore(&dbg_data.lck, flags);
-
-	if (dbg_data.tty != 0)
-		pr_notice("%04X\t? %02X %-7.7s %4i ?\t%s\n",
-			  stamp, addr, name, status, extra);
-}
-
-/**
- * dbg_done: prints a DONE event
- * @addr:   endpoint address
- * @td:     transfer descriptor
- * @status: status
- */
-static void dbg_done(u8 addr, const u32 token, int status)
-{
-	char msg[DBG_DATA_MSG];
-
-	scnprintf(msg, sizeof(msg), "%d %02X",
-		  (int)(token & TD_TOTAL_BYTES) >> ffs_nr(TD_TOTAL_BYTES),
-		  (int)(token & TD_STATUS)      >> ffs_nr(TD_STATUS));
-	dbg_print(addr, "DONE", status, msg);
-}
-
-/**
- * dbg_event: prints a generic event
- * @addr:   endpoint address
- * @name:   event name
- * @status: status
- */
-static void dbg_event(u8 addr, const char *name, int status)
-{
-	if (name != NULL)
-		dbg_print(addr, name, status, "");
-}
-
-/*
- * dbg_queue: prints a QUEUE event
- * @addr:   endpoint address
- * @req:    USB request
- * @status: status
- */
-static void dbg_queue(u8 addr, const struct usb_request *req, int status)
-{
-	char msg[DBG_DATA_MSG];
-
-	if (req != NULL) {
-		scnprintf(msg, sizeof(msg),
-			  "%d %d", !req->no_interrupt, req->length);
-		dbg_print(addr, "QUEUE", status, msg);
-	}
-}
-
-/**
- * dbg_setup: prints a SETUP event
- * @addr: endpoint address
- * @req:  setup request
- */
-static void dbg_setup(u8 addr, const struct usb_ctrlrequest *req)
-{
-	char msg[DBG_DATA_MSG];
-
-	if (req != NULL) {
-		scnprintf(msg, sizeof(msg),
-			  "%02X %02X %04X %04X %d", req->bRequestType,
-			  req->bRequest, le16_to_cpu(req->wValue),
-			  le16_to_cpu(req->wIndex), le16_to_cpu(req->wLength));
-		dbg_print(addr, "SETUP", 0, msg);
-	}
-}
-
-/**
- * show_events: displays the event buffer
- *
- * Check "device.h" for details
- */
-static ssize_t show_events(struct device *dev, struct device_attribute *attr,
-			   char *buf)
-{
-	unsigned long flags;
-	unsigned i, j, n = 0;
-
-	dbg_trace("[%s] %p\n", __func__, buf);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		return 0;
-	}
-
-	read_lock_irqsave(&dbg_data.lck, flags);
-
-	i = dbg_data.idx;
-	for (dbg_dec(&i); i != dbg_data.idx; dbg_dec(&i)) {
-		n += strlen(dbg_data.buf[i]);
-		if (n >= PAGE_SIZE) {
-			n -= strlen(dbg_data.buf[i]);
-			break;
-		}
-	}
-	for (j = 0, dbg_inc(&i); j < n; dbg_inc(&i))
-		j += scnprintf(buf + j, PAGE_SIZE - j,
-			       "%s", dbg_data.buf[i]);
-
-	read_unlock_irqrestore(&dbg_data.lck, flags);
-
-	return n;
-}
-
-/**
- * store_events: configure if events are going to be also printed to console
- *
- * Check "device.h" for details
- */
-static ssize_t store_events(struct device *dev, struct device_attribute *attr,
-			    const char *buf, size_t count)
-{
-	unsigned tty;
-
-	dbg_trace("[%s] %p, %d\n", __func__, buf, count);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		goto done;
-	}
-
-	if (sscanf(buf, "%u", &tty) != 1 || tty > 1) {
-		dev_err(dev, "<1|0>: enable|disable console log\n");
-		goto done;
-	}
-
-	dbg_data.tty = tty;
-	dev_info(dev, "tty = %u", dbg_data.tty);
-
- done:
-	return count;
-}
-static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events);
-
-/**
- * show_inters: interrupt status, enable status and historic
- *
- * Check "device.h" for details
- */
-static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
-			   char *buf)
-{
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	unsigned long flags;
-	u32 intr;
-	unsigned i, j, n = 0;
-
-	dbg_trace("[%s] %p\n", __func__, buf);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		return 0;
-	}
-
-	spin_lock_irqsave(udc->lock, flags);
-
-	n += scnprintf(buf + n, PAGE_SIZE - n,
-		       "status = %08x\n", hw_read_intr_status());
-	n += scnprintf(buf + n, PAGE_SIZE - n,
-		       "enable = %08x\n", hw_read_intr_enable());
-
-	n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n",
-		       isr_statistics.test);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "? ui  = %d\n",
-		       isr_statistics.ui);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "? uei = %d\n",
-		       isr_statistics.uei);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "? pci = %d\n",
-		       isr_statistics.pci);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "? uri = %d\n",
-		       isr_statistics.uri);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "? sli = %d\n",
-		       isr_statistics.sli);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "*none = %d\n",
-		       isr_statistics.none);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "*hndl = %d\n",
-		       isr_statistics.hndl.cnt);
-
-	for (i = isr_statistics.hndl.idx, j = 0; j <= ISR_MASK; j++, i++) {
-		i   &= ISR_MASK;
-		intr = isr_statistics.hndl.buf[i];
-
-		if (USBi_UI  & intr)
-			n += scnprintf(buf + n, PAGE_SIZE - n, "ui  ");
-		intr &= ~USBi_UI;
-		if (USBi_UEI & intr)
-			n += scnprintf(buf + n, PAGE_SIZE - n, "uei ");
-		intr &= ~USBi_UEI;
-		if (USBi_PCI & intr)
-			n += scnprintf(buf + n, PAGE_SIZE - n, "pci ");
-		intr &= ~USBi_PCI;
-		if (USBi_URI & intr)
-			n += scnprintf(buf + n, PAGE_SIZE - n, "uri ");
-		intr &= ~USBi_URI;
-		if (USBi_SLI & intr)
-			n += scnprintf(buf + n, PAGE_SIZE - n, "sli ");
-		intr &= ~USBi_SLI;
-		if (intr)
-			n += scnprintf(buf + n, PAGE_SIZE - n, "??? ");
-		if (isr_statistics.hndl.buf[i])
-			n += scnprintf(buf + n, PAGE_SIZE - n, "\n");
-	}
-
-	spin_unlock_irqrestore(udc->lock, flags);
-
-	return n;
-}
-
-/**
- * store_inters: enable & force or disable an individual interrutps
- *                   (to be used for test purposes only)
- *
- * Check "device.h" for details
- */
-static ssize_t store_inters(struct device *dev, struct device_attribute *attr,
-			    const char *buf, size_t count)
-{
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	unsigned long flags;
-	unsigned en, bit;
-
-	dbg_trace("[%s] %p, %d\n", __func__, buf, count);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		goto done;
-	}
-
-	if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) {
-		dev_err(dev, "<1|0> <bit>: enable|disable interrupt");
-		goto done;
-	}
-
-	spin_lock_irqsave(udc->lock, flags);
-	if (en) {
-		if (hw_intr_force(bit))
-			dev_err(dev, "invalid bit number\n");
-		else
-			isr_statistics.test++;
-	} else {
-		if (hw_intr_clear(bit))
-			dev_err(dev, "invalid bit number\n");
-	}
-	spin_unlock_irqrestore(udc->lock, flags);
-
- done:
-	return count;
-}
-static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters);
-
-/**
- * show_port_test: reads port test mode
- *
- * Check "device.h" for details
- */
-static ssize_t show_port_test(struct device *dev,
-			      struct device_attribute *attr, char *buf)
-{
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	unsigned long flags;
-	unsigned mode;
-
-	dbg_trace("[%s] %p\n", __func__, buf);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		return 0;
-	}
-
-	spin_lock_irqsave(udc->lock, flags);
-	mode = hw_port_test_get();
-	spin_unlock_irqrestore(udc->lock, flags);
-
-	return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode);
-}
-
-/**
- * store_port_test: writes port test mode
- *
- * Check "device.h" for details
- */
-static ssize_t store_port_test(struct device *dev,
-			       struct device_attribute *attr,
-			       const char *buf, size_t count)
-{
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	unsigned long flags;
-	unsigned mode;
-
-	dbg_trace("[%s] %p, %d\n", __func__, buf, count);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		goto done;
-	}
-
-	if (sscanf(buf, "%u", &mode) != 1) {
-		dev_err(dev, "<mode>: set port test mode");
-		goto done;
-	}
-
-	spin_lock_irqsave(udc->lock, flags);
-	if (hw_port_test_set(mode))
-		dev_err(dev, "invalid mode\n");
-	spin_unlock_irqrestore(udc->lock, flags);
-
- done:
-	return count;
-}
-static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR,
-		   show_port_test, store_port_test);
-
-/**
- * show_qheads: DMA contents of all queue heads
- *
- * Check "device.h" for details
- */
-static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
-			   char *buf)
-{
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	unsigned long flags;
-	unsigned i, j, n = 0;
-
-	dbg_trace("[%s] %p\n", __func__, buf);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		return 0;
-	}
-
-	spin_lock_irqsave(udc->lock, flags);
-	for (i = 0; i < hw_ep_max/2; i++) {
-		struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i];
-		struct ci13xxx_ep *mEpTx = &udc->ci13xxx_ep[i + hw_ep_max/2];
-		n += scnprintf(buf + n, PAGE_SIZE - n,
-			       "EP=%02i: RX=%08X TX=%08X\n",
-			       i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma);
-		for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) {
-			n += scnprintf(buf + n, PAGE_SIZE - n,
-				       " %04X:    %08X    %08X\n", j,
-				       *((u32 *)mEpRx->qh.ptr + j),
-				       *((u32 *)mEpTx->qh.ptr + j));
-		}
-	}
-	spin_unlock_irqrestore(udc->lock, flags);
-
-	return n;
-}
-static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL);
-
-/**
- * show_registers: dumps all registers
- *
- * Check "device.h" for details
- */
-#define DUMP_ENTRIES	512
-static ssize_t show_registers(struct device *dev,
-			      struct device_attribute *attr, char *buf)
-{
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	unsigned long flags;
-	u32 *dump;
-	unsigned i, k, n = 0;
-
-	dbg_trace("[%s] %p\n", __func__, buf);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		return 0;
-	}
-
-	dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL);
-	if (!dump) {
-		dev_err(dev, "%s: out of memory\n", __func__);
-		return 0;
-	}
-
-	spin_lock_irqsave(udc->lock, flags);
-	k = hw_register_read(dump, DUMP_ENTRIES);
-	spin_unlock_irqrestore(udc->lock, flags);
-
-	for (i = 0; i < k; i++) {
-		n += scnprintf(buf + n, PAGE_SIZE - n,
-			       "reg[0x%04X] = 0x%08X\n",
-			       i * (unsigned)sizeof(u32), dump[i]);
-	}
-	kfree(dump);
-
-	return n;
-}
-
-/**
- * store_registers: writes value to register address
- *
- * Check "device.h" for details
- */
-static ssize_t store_registers(struct device *dev,
-			       struct device_attribute *attr,
-			       const char *buf, size_t count)
-{
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	unsigned long addr, data, flags;
-
-	dbg_trace("[%s] %p, %d\n", __func__, buf, count);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		goto done;
-	}
-
-	if (sscanf(buf, "%li %li", &addr, &data) != 2) {
-		dev_err(dev, "<addr> <data>: write data to register address");
-		goto done;
-	}
-
-	spin_lock_irqsave(udc->lock, flags);
-	if (hw_register_write(addr, data))
-		dev_err(dev, "invalid address range\n");
-	spin_unlock_irqrestore(udc->lock, flags);
-
- done:
-	return count;
-}
-static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR,
-		   show_registers, store_registers);
-
-/**
- * show_requests: DMA contents of all requests currently queued (all endpts)
- *
- * Check "device.h" for details
- */
-static ssize_t show_requests(struct device *dev, struct device_attribute *attr,
-			     char *buf)
-{
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	unsigned long flags;
-	struct list_head   *ptr = NULL;
-	struct ci13xxx_req *req = NULL;
-	unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32);
-
-	dbg_trace("[%s] %p\n", __func__, buf);
-	if (attr == NULL || buf == NULL) {
-		dev_err(dev, "[%s] EINVAL\n", __func__);
-		return 0;
-	}
-
-	spin_lock_irqsave(udc->lock, flags);
-	for (i = 0; i < hw_ep_max; i++)
-		list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue)
-		{
-			req = list_entry(ptr, struct ci13xxx_req, queue);
-
-			n += scnprintf(buf + n, PAGE_SIZE - n,
-					"EP=%02i: TD=%08X %s\n",
-					i % hw_ep_max/2, (u32)req->dma,
-					((i < hw_ep_max/2) ? "RX" : "TX"));
-
-			for (j = 0; j < qSize; j++)
-				n += scnprintf(buf + n, PAGE_SIZE - n,
-						" %04X:    %08X\n", j,
-						*((u32 *)req->ptr + j));
-		}
-	spin_unlock_irqrestore(udc->lock, flags);
-
-	return n;
-}
-static DEVICE_ATTR(requests, S_IRUSR, show_requests, NULL);
-
-/**
- * dbg_create_files: initializes the attribute interface
- * @dev: device
- *
- * This function returns an error code
- */
-__maybe_unused static int dbg_create_files(struct device *dev)
-{
-	int retval = 0;
-
-	if (dev == NULL)
-		return -EINVAL;
-	retval = device_create_file(dev, &dev_attr_device);
-	if (retval)
-		goto done;
-	retval = device_create_file(dev, &dev_attr_driver);
-	if (retval)
-		goto rm_device;
-	retval = device_create_file(dev, &dev_attr_events);
-	if (retval)
-		goto rm_driver;
-	retval = device_create_file(dev, &dev_attr_inters);
-	if (retval)
-		goto rm_events;
-	retval = device_create_file(dev, &dev_attr_port_test);
-	if (retval)
-		goto rm_inters;
-	retval = device_create_file(dev, &dev_attr_qheads);
-	if (retval)
-		goto rm_port_test;
-	retval = device_create_file(dev, &dev_attr_registers);
-	if (retval)
-		goto rm_qheads;
-	retval = device_create_file(dev, &dev_attr_requests);
-	if (retval)
-		goto rm_registers;
-	return 0;
-
- rm_registers:
-	device_remove_file(dev, &dev_attr_registers);
- rm_qheads:
-	device_remove_file(dev, &dev_attr_qheads);
- rm_port_test:
-	device_remove_file(dev, &dev_attr_port_test);
- rm_inters:
-	device_remove_file(dev, &dev_attr_inters);
- rm_events:
-	device_remove_file(dev, &dev_attr_events);
- rm_driver:
-	device_remove_file(dev, &dev_attr_driver);
- rm_device:
-	device_remove_file(dev, &dev_attr_device);
- done:
-	return retval;
-}
-
-/**
- * dbg_remove_files: destroys the attribute interface
- * @dev: device
- *
- * This function returns an error code
- */
-__maybe_unused static int dbg_remove_files(struct device *dev)
-{
-	if (dev == NULL)
-		return -EINVAL;
-	device_remove_file(dev, &dev_attr_requests);
-	device_remove_file(dev, &dev_attr_registers);
-	device_remove_file(dev, &dev_attr_qheads);
-	device_remove_file(dev, &dev_attr_port_test);
-	device_remove_file(dev, &dev_attr_inters);
-	device_remove_file(dev, &dev_attr_events);
-	device_remove_file(dev, &dev_attr_driver);
-	device_remove_file(dev, &dev_attr_device);
-	return 0;
-}
-
-/******************************************************************************
- * UTIL block
- *****************************************************************************/
-/**
- * _usb_addr: calculates endpoint address from direction & number
- * @ep:  endpoint
- */
-static inline u8 _usb_addr(struct ci13xxx_ep *ep)
-{
-	return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
-}
-
-/**
- * _hardware_queue: configures a request at hardware level
- * @gadget: gadget
- * @mEp:    endpoint
- *
- * This function returns an error code
- */
-static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
-{
-	unsigned i;
-	int ret = 0;
-	unsigned length = mReq->req.length;
-
-	trace("%p, %p", mEp, mReq);
-
-	/* don't queue twice */
-	if (mReq->req.status == -EALREADY)
-		return -EALREADY;
-
-	mReq->req.status = -EALREADY;
-	if (length && mReq->req.dma == DMA_ADDR_INVALID) {
-		mReq->req.dma = \
-			dma_map_single(mEp->device, mReq->req.buf,
-				       length, mEp->dir ? DMA_TO_DEVICE :
-				       DMA_FROM_DEVICE);
-		if (mReq->req.dma == 0)
-			return -ENOMEM;
-
-		mReq->map = 1;
-	}
-
-	if (mReq->req.zero && length && (length % mEp->ep.maxpacket == 0)) {
-		mReq->zptr = dma_pool_alloc(mEp->td_pool, GFP_ATOMIC,
-					   &mReq->zdma);
-		if (mReq->zptr == NULL) {
-			if (mReq->map) {
-				dma_unmap_single(mEp->device, mReq->req.dma,
-					length, mEp->dir ? DMA_TO_DEVICE :
-					DMA_FROM_DEVICE);
-				mReq->req.dma = DMA_ADDR_INVALID;
-				mReq->map     = 0;
-			}
-			return -ENOMEM;
-		}
-		memset(mReq->zptr, 0, sizeof(*mReq->zptr));
-		mReq->zptr->next    = TD_TERMINATE;
-		mReq->zptr->token   = TD_STATUS_ACTIVE;
-		if (!mReq->req.no_interrupt)
-			mReq->zptr->token   |= TD_IOC;
-	}
-	/*
-	 * TD configuration
-	 * TODO - handle requests which spawns into several TDs
-	 */
-	memset(mReq->ptr, 0, sizeof(*mReq->ptr));
-	mReq->ptr->token    = length << ffs_nr(TD_TOTAL_BYTES);
-	mReq->ptr->token   &= TD_TOTAL_BYTES;
-	mReq->ptr->token   |= TD_STATUS_ACTIVE;
-	if (mReq->zptr) {
-		mReq->ptr->next    = mReq->zdma;
-	} else {
-		mReq->ptr->next    = TD_TERMINATE;
-		if (!mReq->req.no_interrupt)
-			mReq->ptr->token  |= TD_IOC;
-	}
-	mReq->ptr->page[0]  = mReq->req.dma;
-	for (i = 1; i < 5; i++)
-		mReq->ptr->page[i] =
-			(mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK;
-
-	if (!list_empty(&mEp->qh.queue)) {
-		struct ci13xxx_req *mReqPrev;
-		int n = hw_ep_bit(mEp->num, mEp->dir);
-		int tmp_stat;
-
-		mReqPrev = list_entry(mEp->qh.queue.prev,
-				struct ci13xxx_req, queue);
-		if (mReqPrev->zptr)
-			mReqPrev->zptr->next = mReq->dma & TD_ADDR_MASK;
-		else
-			mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK;
-		wmb();
-		if (hw_cread(CAP_ENDPTPRIME, BIT(n)))
-			goto done;
-		do {
-			hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
-			tmp_stat = hw_cread(CAP_ENDPTSTAT, BIT(n));
-		} while (!hw_cread(CAP_USBCMD, USBCMD_ATDTW));
-		hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, 0);
-		if (tmp_stat)
-			goto done;
-	}
-
-	/*  QH configuration */
-	mEp->qh.ptr->td.next   = mReq->dma;    /* TERMINATE = 0 */
-	mEp->qh.ptr->td.token &= ~TD_STATUS;   /* clear status */
-	mEp->qh.ptr->cap |=  QH_ZLT;
-
-	wmb();   /* synchronize before ep prime */
-
-	ret = hw_ep_prime(mEp->num, mEp->dir,
-			   mEp->type == USB_ENDPOINT_XFER_CONTROL);
-done:
-	return ret;
-}
-
-/**
- * _hardware_dequeue: handles a request at hardware level
- * @gadget: gadget
- * @mEp:    endpoint
- *
- * This function returns an error code
- */
-static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
-{
-	trace("%p, %p", mEp, mReq);
-
-	if (mReq->req.status != -EALREADY)
-		return -EINVAL;
-
-	if ((TD_STATUS_ACTIVE & mReq->ptr->token) != 0)
-		return -EBUSY;
-
-	if (mReq->zptr) {
-		if ((TD_STATUS_ACTIVE & mReq->zptr->token) != 0)
-			return -EBUSY;
-		dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma);
-		mReq->zptr = NULL;
-	}
-
-	mReq->req.status = 0;
-
-	if (mReq->map) {
-		dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
-				 mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		mReq->req.dma = DMA_ADDR_INVALID;
-		mReq->map     = 0;
-	}
-
-	mReq->req.status = mReq->ptr->token & TD_STATUS;
-	if ((TD_STATUS_HALTED & mReq->req.status) != 0)
-		mReq->req.status = -1;
-	else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0)
-		mReq->req.status = -1;
-	else if ((TD_STATUS_TR_ERR & mReq->req.status) != 0)
-		mReq->req.status = -1;
-
-	mReq->req.actual   = mReq->ptr->token & TD_TOTAL_BYTES;
-	mReq->req.actual >>= ffs_nr(TD_TOTAL_BYTES);
-	mReq->req.actual   = mReq->req.length - mReq->req.actual;
-	mReq->req.actual   = mReq->req.status ? 0 : mReq->req.actual;
-
-	return mReq->req.actual;
-}
-
-/**
- * _ep_nuke: dequeues all endpoint requests
- * @mEp: endpoint
- *
- * This function returns an error code
- * Caller must hold lock
- */
-static int _ep_nuke(struct ci13xxx_ep *mEp)
-__releases(mEp->lock)
-__acquires(mEp->lock)
-{
-	trace("%p", mEp);
-
-	if (mEp == NULL)
-		return -EINVAL;
-
-	hw_ep_flush(mEp->num, mEp->dir);
-
-	while (!list_empty(&mEp->qh.queue)) {
-
-		/* pop oldest request */
-		struct ci13xxx_req *mReq = \
-			list_entry(mEp->qh.queue.next,
-				   struct ci13xxx_req, queue);
-		list_del_init(&mReq->queue);
-		mReq->req.status = -ESHUTDOWN;
-
-		if (mReq->req.complete != NULL) {
-			spin_unlock(mEp->lock);
-			mReq->req.complete(&mEp->ep, &mReq->req);
-			spin_lock(mEp->lock);
-		}
-	}
-	return 0;
-}
-
-/**
- * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
- * @gadget: gadget
- *
- * This function returns an error code
- */
-static int _gadget_stop_activity(struct usb_gadget *gadget)
-{
-	struct usb_ep *ep;
-	struct ci13xxx    *udc = container_of(gadget, struct ci13xxx, gadget);
-	unsigned long flags;
-
-	trace("%p", gadget);
-
-	if (gadget == NULL)
-		return -EINVAL;
-
-	spin_lock_irqsave(udc->lock, flags);
-	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	udc->remote_wakeup = 0;
-	udc->suspended = 0;
-	spin_unlock_irqrestore(udc->lock, flags);
-
-	/* flush all endpoints */
-	gadget_for_each_ep(ep, gadget) {
-		usb_ep_fifo_flush(ep);
-	}
-	usb_ep_fifo_flush(&udc->ep0out.ep);
-	usb_ep_fifo_flush(&udc->ep0in.ep);
-
-	udc->driver->disconnect(gadget);
-
-	/* make sure to disable all endpoints */
-	gadget_for_each_ep(ep, gadget) {
-		usb_ep_disable(ep);
-	}
-
-	if (udc->status != NULL) {
-		usb_ep_free_request(&udc->ep0in.ep, udc->status);
-		udc->status = NULL;
-	}
-
-	return 0;
-}
-
-/******************************************************************************
- * ISR block
- *****************************************************************************/
-/**
- * isr_reset_handler: USB reset interrupt handler
- * @udc: UDC device
- *
- * This function resets USB engine after a bus reset occurred
- */
-static void isr_reset_handler(struct ci13xxx *udc)
-__releases(udc->lock)
-__acquires(udc->lock)
-{
-	int retval;
-
-	trace("%p", udc);
-
-	if (udc == NULL) {
-		err("EINVAL");
-		return;
-	}
-
-	dbg_event(0xFF, "BUS RST", 0);
-
-	spin_unlock(udc->lock);
-	retval = _gadget_stop_activity(&udc->gadget);
-	if (retval)
-		goto done;
-
-	retval = hw_usb_reset();
-	if (retval)
-		goto done;
-
-	udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC);
-	if (udc->status == NULL)
-		retval = -ENOMEM;
-
-	spin_lock(udc->lock);
-
- done:
-	if (retval)
-		err("error: %i", retval);
-}
-
-/**
- * isr_get_status_complete: get_status request complete function
- * @ep:  endpoint
- * @req: request handled
- *
- * Caller must release lock
- */
-static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	trace("%p, %p", ep, req);
-
-	if (ep == NULL || req == NULL) {
-		err("EINVAL");
-		return;
-	}
-
-	kfree(req->buf);
-	usb_ep_free_request(ep, req);
-}
-
-/**
- * isr_get_status_response: get_status request response
- * @udc: udc struct
- * @setup: setup request packet
- *
- * This function returns an error code
- */
-static int isr_get_status_response(struct ci13xxx *udc,
-				   struct usb_ctrlrequest *setup)
-__releases(mEp->lock)
-__acquires(mEp->lock)
-{
-	struct ci13xxx_ep *mEp = &udc->ep0in;
-	struct usb_request *req = NULL;
-	gfp_t gfp_flags = GFP_ATOMIC;
-	int dir, num, retval;
-
-	trace("%p, %p", mEp, setup);
-
-	if (mEp == NULL || setup == NULL)
-		return -EINVAL;
-
-	spin_unlock(mEp->lock);
-	req = usb_ep_alloc_request(&mEp->ep, gfp_flags);
-	spin_lock(mEp->lock);
-	if (req == NULL)
-		return -ENOMEM;
-
-	req->complete = isr_get_status_complete;
-	req->length   = 2;
-	req->buf      = kzalloc(req->length, gfp_flags);
-	if (req->buf == NULL) {
-		retval = -ENOMEM;
-		goto err_free_req;
-	}
-
-	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
-		/* Assume that device is bus powered for now. */
-		*((u16 *)req->buf) = _udc->remote_wakeup << 1;
-		retval = 0;
-	} else if ((setup->bRequestType & USB_RECIP_MASK) \
-		   == USB_RECIP_ENDPOINT) {
-		dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
-			TX : RX;
-		num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
-		*((u16 *)req->buf) = hw_ep_get_halt(num, dir);
-	}
-	/* else do nothing; reserved for future use */
-
-	spin_unlock(mEp->lock);
-	retval = usb_ep_queue(&mEp->ep, req, gfp_flags);
-	spin_lock(mEp->lock);
-	if (retval)
-		goto err_free_buf;
-
-	return 0;
-
- err_free_buf:
-	kfree(req->buf);
- err_free_req:
-	spin_unlock(mEp->lock);
-	usb_ep_free_request(&mEp->ep, req);
-	spin_lock(mEp->lock);
-	return retval;
-}
-
-/**
- * isr_setup_status_complete: setup_status request complete function
- * @ep:  endpoint
- * @req: request handled
- *
- * Caller must release lock. Put the port in test mode if test mode
- * feature is selected.
- */
-static void
-isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct ci13xxx *udc = req->context;
-	unsigned long flags;
-
-	trace("%p, %p", ep, req);
-
-	spin_lock_irqsave(udc->lock, flags);
-	if (udc->test_mode)
-		hw_port_test_set(udc->test_mode);
-	spin_unlock_irqrestore(udc->lock, flags);
-}
-
-/**
- * isr_setup_status_phase: queues the status phase of a setup transation
- * @udc: udc struct
- *
- * This function returns an error code
- */
-static int isr_setup_status_phase(struct ci13xxx *udc)
-__releases(mEp->lock)
-__acquires(mEp->lock)
-{
-	int retval;
-	struct ci13xxx_ep *mEp;
-
-	trace("%p", udc);
-
-	mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in;
-	udc->status->context = udc;
-	udc->status->complete = isr_setup_status_complete;
-
-	spin_unlock(mEp->lock);
-	retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC);
-	spin_lock(mEp->lock);
-
-	return retval;
-}
-
-/**
- * isr_tr_complete_low: transaction complete low level handler
- * @mEp: endpoint
- *
- * This function returns an error code
- * Caller must hold lock
- */
-static int isr_tr_complete_low(struct ci13xxx_ep *mEp)
-__releases(mEp->lock)
-__acquires(mEp->lock)
-{
-	struct ci13xxx_req *mReq, *mReqTemp;
-	struct ci13xxx_ep *mEpTemp = mEp;
-	int uninitialized_var(retval);
-
-	trace("%p", mEp);
-
-	if (list_empty(&mEp->qh.queue))
-		return -EINVAL;
-
-	list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue,
-			queue) {
-		retval = _hardware_dequeue(mEp, mReq);
-		if (retval < 0)
-			break;
-		list_del_init(&mReq->queue);
-		dbg_done(_usb_addr(mEp), mReq->ptr->token, retval);
-		if (mReq->req.complete != NULL) {
-			spin_unlock(mEp->lock);
-			if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) &&
-					mReq->req.length)
-				mEpTemp = &_udc->ep0in;
-			mReq->req.complete(&mEpTemp->ep, &mReq->req);
-			spin_lock(mEp->lock);
-		}
-	}
-
-	if (retval == -EBUSY)
-		retval = 0;
-	if (retval < 0)
-		dbg_event(_usb_addr(mEp), "DONE", retval);
-
-	return retval;
-}
-
-/**
- * isr_tr_complete_handler: transaction complete interrupt handler
- * @udc: UDC descriptor
- *
- * This function handles traffic events
- */
-static void isr_tr_complete_handler(struct ci13xxx *udc)
-__releases(udc->lock)
-__acquires(udc->lock)
-{
-	unsigned i;
-	u8 tmode = 0;
-
-	trace("%p", udc);
-
-	if (udc == NULL) {
-		err("EINVAL");
-		return;
-	}
-
-	for (i = 0; i < hw_ep_max; i++) {
-		struct ci13xxx_ep *mEp  = &udc->ci13xxx_ep[i];
-		int type, num, dir, err = -EINVAL;
-		struct usb_ctrlrequest req;
-
-		if (mEp->desc == NULL)
-			continue;   /* not configured */
-
-		if (hw_test_and_clear_complete(i)) {
-			err = isr_tr_complete_low(mEp);
-			if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
-				if (err > 0)   /* needs status phase */
-					err = isr_setup_status_phase(udc);
-				if (err < 0) {
-					dbg_event(_usb_addr(mEp),
-						  "ERROR", err);
-					spin_unlock(udc->lock);
-					if (usb_ep_set_halt(&mEp->ep))
-						err("error: ep_set_halt");
-					spin_lock(udc->lock);
-				}
-			}
-		}
-
-		if (mEp->type != USB_ENDPOINT_XFER_CONTROL ||
-		    !hw_test_and_clear_setup_status(i))
-			continue;
-
-		if (i != 0) {
-			warn("ctrl traffic received at endpoint");
-			continue;
-		}
-
-		/*
-		 * Flush data and handshake transactions of previous
-		 * setup packet.
-		 */
-		_ep_nuke(&udc->ep0out);
-		_ep_nuke(&udc->ep0in);
-
-		/* read_setup_packet */
-		do {
-			hw_test_and_set_setup_guard();
-			memcpy(&req, &mEp->qh.ptr->setup, sizeof(req));
-		} while (!hw_test_and_clear_setup_guard());
-
-		type = req.bRequestType;
-
-		udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
-
-		dbg_setup(_usb_addr(mEp), &req);
-
-		switch (req.bRequest) {
-		case USB_REQ_CLEAR_FEATURE:
-			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
-					le16_to_cpu(req.wValue) ==
-					USB_ENDPOINT_HALT) {
-				if (req.wLength != 0)
-					break;
-				num  = le16_to_cpu(req.wIndex);
-				dir = num & USB_ENDPOINT_DIR_MASK;
-				num &= USB_ENDPOINT_NUMBER_MASK;
-				if (dir) /* TX */
-					num += hw_ep_max/2;
-				if (!udc->ci13xxx_ep[num].wedge) {
-					spin_unlock(udc->lock);
-					err = usb_ep_clear_halt(
-						&udc->ci13xxx_ep[num].ep);
-					spin_lock(udc->lock);
-					if (err)
-						break;
-				}
-				err = isr_setup_status_phase(udc);
-			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
-					le16_to_cpu(req.wValue) ==
-					USB_DEVICE_REMOTE_WAKEUP) {
-				if (req.wLength != 0)
-					break;
-				udc->remote_wakeup = 0;
-				err = isr_setup_status_phase(udc);
-			} else {
-				goto delegate;
-			}
-			break;
-		case USB_REQ_GET_STATUS:
-			if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   &&
-			    type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
-			    type != (USB_DIR_IN|USB_RECIP_INTERFACE))
-				goto delegate;
-			if (le16_to_cpu(req.wLength) != 2 ||
-			    le16_to_cpu(req.wValue)  != 0)
-				break;
-			err = isr_get_status_response(udc, &req);
-			break;
-		case USB_REQ_SET_ADDRESS:
-			if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
-				goto delegate;
-			if (le16_to_cpu(req.wLength) != 0 ||
-			    le16_to_cpu(req.wIndex)  != 0)
-				break;
-			err = hw_usb_set_address((u8)le16_to_cpu(req.wValue));
-			if (err)
-				break;
-			err = isr_setup_status_phase(udc);
-			break;
-		case USB_REQ_SET_FEATURE:
-			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
-					le16_to_cpu(req.wValue) ==
-					USB_ENDPOINT_HALT) {
-				if (req.wLength != 0)
-					break;
-				num  = le16_to_cpu(req.wIndex);
-				dir = num & USB_ENDPOINT_DIR_MASK;
-				num &= USB_ENDPOINT_NUMBER_MASK;
-				if (dir) /* TX */
-					num += hw_ep_max/2;
-
-				spin_unlock(udc->lock);
-				err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep);
-				spin_lock(udc->lock);
-				if (!err)
-					isr_setup_status_phase(udc);
-			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
-				if (req.wLength != 0)
-					break;
-				switch (le16_to_cpu(req.wValue)) {
-				case USB_DEVICE_REMOTE_WAKEUP:
-					udc->remote_wakeup = 1;
-					err = isr_setup_status_phase(udc);
-					break;
-				case USB_DEVICE_TEST_MODE:
-					tmode = le16_to_cpu(req.wIndex) >> 8;
-					switch (tmode) {
-					case TEST_J:
-					case TEST_K:
-					case TEST_SE0_NAK:
-					case TEST_PACKET:
-					case TEST_FORCE_EN:
-						udc->test_mode = tmode;
-						err = isr_setup_status_phase(
-								udc);
-						break;
-					default:
-						break;
-					}
-				default:
-					goto delegate;
-				}
-			} else {
-				goto delegate;
-			}
-			break;
-		default:
-delegate:
-			if (req.wLength == 0)   /* no data phase */
-				udc->ep0_dir = TX;
-
-			spin_unlock(udc->lock);
-			err = udc->driver->setup(&udc->gadget, &req);
-			spin_lock(udc->lock);
-			break;
-		}
-
-		if (err < 0) {
-			dbg_event(_usb_addr(mEp), "ERROR", err);
-
-			spin_unlock(udc->lock);
-			if (usb_ep_set_halt(&mEp->ep))
-				err("error: ep_set_halt");
-			spin_lock(udc->lock);
-		}
-	}
-}
-
-/******************************************************************************
- * ENDPT block
- *****************************************************************************/
-/**
- * ep_enable: configure endpoint, making it usable
- *
- * Check usb_ep_enable() at "usb_gadget.h" for details
- */
-static int ep_enable(struct usb_ep *ep,
-		     const struct usb_endpoint_descriptor *desc)
-{
-	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
-	int retval = 0;
-	unsigned long flags;
-
-	trace("%p, %p", ep, desc);
-
-	if (ep == NULL || desc == NULL)
-		return -EINVAL;
-
-	spin_lock_irqsave(mEp->lock, flags);
-
-	/* only internal SW should enable ctrl endpts */
-
-	mEp->desc = desc;
-
-	if (!list_empty(&mEp->qh.queue))
-		warn("enabling a non-empty endpoint!");
-
-	mEp->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
-	mEp->num  = usb_endpoint_num(desc);
-	mEp->type = usb_endpoint_type(desc);
-
-	mEp->ep.maxpacket = usb_endpoint_maxp(desc);
-
-	dbg_event(_usb_addr(mEp), "ENABLE", 0);
-
-	mEp->qh.ptr->cap = 0;
-
-	if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
-		mEp->qh.ptr->cap |=  QH_IOS;
-	else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
-		mEp->qh.ptr->cap &= ~QH_MULT;
-	else
-		mEp->qh.ptr->cap &= ~QH_ZLT;
-
-	mEp->qh.ptr->cap |=
-		(mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT;
-	mEp->qh.ptr->td.next |= TD_TERMINATE;   /* needed? */
-
-	/*
-	 * Enable endpoints in the HW other than ep0 as ep0
-	 * is always enabled
-	 */
-	if (mEp->num)
-		retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type);
-
-	spin_unlock_irqrestore(mEp->lock, flags);
-	return retval;
-}
-
-/**
- * ep_disable: endpoint is no longer usable
- *
- * Check usb_ep_disable() at "usb_gadget.h" for details
- */
-static int ep_disable(struct usb_ep *ep)
-{
-	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
-	int direction, retval = 0;
-	unsigned long flags;
-
-	trace("%p", ep);
-
-	if (ep == NULL)
-		return -EINVAL;
-	else if (mEp->desc == NULL)
-		return -EBUSY;
-
-	spin_lock_irqsave(mEp->lock, flags);
-
-	/* only internal SW should disable ctrl endpts */
-
-	direction = mEp->dir;
-	do {
-		dbg_event(_usb_addr(mEp), "DISABLE", 0);
-
-		retval |= _ep_nuke(mEp);
-		retval |= hw_ep_disable(mEp->num, mEp->dir);
-
-		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
-			mEp->dir = (mEp->dir == TX) ? RX : TX;
-
-	} while (mEp->dir != direction);
-
-	mEp->desc = NULL;
-	mEp->ep.desc = NULL;
-
-	spin_unlock_irqrestore(mEp->lock, flags);
-	return retval;
-}
-
-/**
- * ep_alloc_request: allocate a request object to use with this endpoint
- *
- * Check usb_ep_alloc_request() at "usb_gadget.h" for details
- */
-static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
-{
-	struct ci13xxx_ep  *mEp  = container_of(ep, struct ci13xxx_ep, ep);
-	struct ci13xxx_req *mReq = NULL;
-
-	trace("%p, %i", ep, gfp_flags);
-
-	if (ep == NULL) {
-		err("EINVAL");
-		return NULL;
-	}
-
-	mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
-	if (mReq != NULL) {
-		INIT_LIST_HEAD(&mReq->queue);
-		mReq->req.dma = DMA_ADDR_INVALID;
-
-		mReq->ptr = dma_pool_alloc(mEp->td_pool, gfp_flags,
-					   &mReq->dma);
-		if (mReq->ptr == NULL) {
-			kfree(mReq);
-			mReq = NULL;
-		}
-	}
-
-	dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL);
-
-	return (mReq == NULL) ? NULL : &mReq->req;
-}
-
-/**
- * ep_free_request: frees a request object
- *
- * Check usb_ep_free_request() at "usb_gadget.h" for details
- */
-static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
-{
-	struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
-	struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
-	unsigned long flags;
-
-	trace("%p, %p", ep, req);
-
-	if (ep == NULL || req == NULL) {
-		err("EINVAL");
-		return;
-	} else if (!list_empty(&mReq->queue)) {
-		err("EBUSY");
-		return;
-	}
-
-	spin_lock_irqsave(mEp->lock, flags);
-
-	if (mReq->ptr)
-		dma_pool_free(mEp->td_pool, mReq->ptr, mReq->dma);
-	kfree(mReq);
-
-	dbg_event(_usb_addr(mEp), "FREE", 0);
-
-	spin_unlock_irqrestore(mEp->lock, flags);
-}
-
-/**
- * ep_queue: queues (submits) an I/O request to an endpoint
- *
- * Check usb_ep_queue()* at usb_gadget.h" for details
- */
-static int ep_queue(struct usb_ep *ep, struct usb_request *req,
-		    gfp_t __maybe_unused gfp_flags)
-{
-	struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
-	struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
-	int retval = 0;
-	unsigned long flags;
-
-	trace("%p, %p, %X", ep, req, gfp_flags);
-
-	if (ep == NULL || req == NULL || mEp->desc == NULL)
-		return -EINVAL;
-
-	spin_lock_irqsave(mEp->lock, flags);
-
-	if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
-		if (req->length)
-			mEp = (_udc->ep0_dir == RX) ?
-				&_udc->ep0out : &_udc->ep0in;
-		if (!list_empty(&mEp->qh.queue)) {
-			_ep_nuke(mEp);
-			retval = -EOVERFLOW;
-			warn("endpoint ctrl %X nuked", _usb_addr(mEp));
-		}
-	}
-
-	/* first nuke then test link, e.g. previous status has not sent */
-	if (!list_empty(&mReq->queue)) {
-		retval = -EBUSY;
-		err("request already in queue");
-		goto done;
-	}
-
-	if (req->length > (4 * CI13XXX_PAGE_SIZE)) {
-		req->length = (4 * CI13XXX_PAGE_SIZE);
-		retval = -EMSGSIZE;
-		warn("request length truncated");
-	}
-
-	dbg_queue(_usb_addr(mEp), req, retval);
-
-	/* push request */
-	mReq->req.status = -EINPROGRESS;
-	mReq->req.actual = 0;
-
-	retval = _hardware_enqueue(mEp, mReq);
-
-	if (retval == -EALREADY) {
-		dbg_event(_usb_addr(mEp), "QUEUE", retval);
-		retval = 0;
-	}
-	if (!retval)
-		list_add_tail(&mReq->queue, &mEp->qh.queue);
-
- done:
-	spin_unlock_irqrestore(mEp->lock, flags);
-	return retval;
-}
-
-/**
- * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
- *
- * Check usb_ep_dequeue() at "usb_gadget.h" for details
- */
-static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
-{
-	struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
-	struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
-	unsigned long flags;
-
-	trace("%p, %p", ep, req);
-
-	if (ep == NULL || req == NULL || mReq->req.status != -EALREADY ||
-		mEp->desc == NULL || list_empty(&mReq->queue) ||
-		list_empty(&mEp->qh.queue))
-		return -EINVAL;
-
-	spin_lock_irqsave(mEp->lock, flags);
-
-	dbg_event(_usb_addr(mEp), "DEQUEUE", 0);
-
-	hw_ep_flush(mEp->num, mEp->dir);
-
-	/* pop request */
-	list_del_init(&mReq->queue);
-	if (mReq->map) {
-		dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length,
-				 mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		mReq->req.dma = DMA_ADDR_INVALID;
-		mReq->map     = 0;
-	}
-	req->status = -ECONNRESET;
-
-	if (mReq->req.complete != NULL) {
-		spin_unlock(mEp->lock);
-		mReq->req.complete(&mEp->ep, &mReq->req);
-		spin_lock(mEp->lock);
-	}
-
-	spin_unlock_irqrestore(mEp->lock, flags);
-	return 0;
-}
-
-/**
- * ep_set_halt: sets the endpoint halt feature
- *
- * Check usb_ep_set_halt() at "usb_gadget.h" for details
- */
-static int ep_set_halt(struct usb_ep *ep, int value)
-{
-	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
-	int direction, retval = 0;
-	unsigned long flags;
-
-	trace("%p, %i", ep, value);
-
-	if (ep == NULL || mEp->desc == NULL)
-		return -EINVAL;
-
-	spin_lock_irqsave(mEp->lock, flags);
-
-#ifndef STALL_IN
-	/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
-	if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX &&
-	    !list_empty(&mEp->qh.queue)) {
-		spin_unlock_irqrestore(mEp->lock, flags);
-		return -EAGAIN;
-	}
-#endif
-
-	direction = mEp->dir;
-	do {
-		dbg_event(_usb_addr(mEp), "HALT", value);
-		retval |= hw_ep_set_halt(mEp->num, mEp->dir, value);
-
-		if (!value)
-			mEp->wedge = 0;
-
-		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
-			mEp->dir = (mEp->dir == TX) ? RX : TX;
-
-	} while (mEp->dir != direction);
-
-	spin_unlock_irqrestore(mEp->lock, flags);
-	return retval;
-}
-
-/**
- * ep_set_wedge: sets the halt feature and ignores clear requests
- *
- * Check usb_ep_set_wedge() at "usb_gadget.h" for details
- */
-static int ep_set_wedge(struct usb_ep *ep)
-{
-	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
-	unsigned long flags;
-
-	trace("%p", ep);
-
-	if (ep == NULL || mEp->desc == NULL)
-		return -EINVAL;
-
-	spin_lock_irqsave(mEp->lock, flags);
-
-	dbg_event(_usb_addr(mEp), "WEDGE", 0);
-	mEp->wedge = 1;
-
-	spin_unlock_irqrestore(mEp->lock, flags);
-
-	return usb_ep_set_halt(ep);
-}
-
-/**
- * ep_fifo_flush: flushes contents of a fifo
- *
- * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
- */
-static void ep_fifo_flush(struct usb_ep *ep)
-{
-	struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep);
-	unsigned long flags;
-
-	trace("%p", ep);
-
-	if (ep == NULL) {
-		err("%02X: -EINVAL", _usb_addr(mEp));
-		return;
-	}
-
-	spin_lock_irqsave(mEp->lock, flags);
-
-	dbg_event(_usb_addr(mEp), "FFLUSH", 0);
-	hw_ep_flush(mEp->num, mEp->dir);
-
-	spin_unlock_irqrestore(mEp->lock, flags);
-}
-
-/**
- * Endpoint-specific part of the API to the USB controller hardware
- * Check "usb_gadget.h" for details
- */
-static const struct usb_ep_ops usb_ep_ops = {
-	.enable	       = ep_enable,
-	.disable       = ep_disable,
-	.alloc_request = ep_alloc_request,
-	.free_request  = ep_free_request,
-	.queue	       = ep_queue,
-	.dequeue       = ep_dequeue,
-	.set_halt      = ep_set_halt,
-	.set_wedge     = ep_set_wedge,
-	.fifo_flush    = ep_fifo_flush,
-};
-
-/******************************************************************************
- * GADGET block
- *****************************************************************************/
-static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
-{
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
-	unsigned long flags;
-	int gadget_ready = 0;
-
-	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS))
-		return -EOPNOTSUPP;
-
-	spin_lock_irqsave(udc->lock, flags);
-	udc->vbus_active = is_active;
-	if (udc->driver)
-		gadget_ready = 1;
-	spin_unlock_irqrestore(udc->lock, flags);
-
-	if (gadget_ready) {
-		if (is_active) {
-			pm_runtime_get_sync(&_gadget->dev);
-			hw_device_reset(udc);
-			hw_device_state(udc->ep0out.qh.dma);
-		} else {
-			hw_device_state(0);
-			if (udc->udc_driver->notify_event)
-				udc->udc_driver->notify_event(udc,
-				CI13XXX_CONTROLLER_STOPPED_EVENT);
-			_gadget_stop_activity(&udc->gadget);
-			pm_runtime_put_sync(&_gadget->dev);
-		}
-	}
-
-	return 0;
-}
-
-static int ci13xxx_wakeup(struct usb_gadget *_gadget)
-{
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
-	unsigned long flags;
-	int ret = 0;
-
-	trace();
-
-	spin_lock_irqsave(udc->lock, flags);
-	if (!udc->remote_wakeup) {
-		ret = -EOPNOTSUPP;
-		trace("remote wakeup feature is not enabled\n");
-		goto out;
-	}
-	if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) {
-		ret = -EINVAL;
-		trace("port is not suspended\n");
-		goto out;
-	}
-	hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR);
-out:
-	spin_unlock_irqrestore(udc->lock, flags);
-	return ret;
-}
-
-static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
-{
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
-
-	if (udc->transceiver)
-		return usb_phy_set_power(udc->transceiver, mA);
-	return -ENOTSUPP;
-}
-
-static int ci13xxx_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int ci13xxx_stop(struct usb_gadget_driver *driver);
-/**
- * Device operations part of the API to the USB controller hardware,
- * which don't involve endpoints (or i/o)
- * Check  "usb_gadget.h" for details
- */
-static const struct usb_gadget_ops usb_gadget_ops = {
-	.vbus_session	= ci13xxx_vbus_session,
-	.wakeup		= ci13xxx_wakeup,
-	.vbus_draw	= ci13xxx_vbus_draw,
-	.start		= ci13xxx_start,
-	.stop		= ci13xxx_stop,
-};
-
-/**
- * ci13xxx_start: register a gadget driver
- * @driver: the driver being registered
- * @bind: the driver's bind callback
- *
- * Check ci13xxx_start() at <linux/usb/gadget.h> for details.
- * Interrupts are enabled here.
- */
-static int ci13xxx_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
-{
-	struct ci13xxx *udc = _udc;
-	unsigned long flags;
-	int i, j;
-	int retval = -ENOMEM;
-
-	trace("%p", driver);
-
-	if (driver             == NULL ||
-	    bind               == NULL ||
-	    driver->setup      == NULL ||
-	    driver->disconnect == NULL)
-		return -EINVAL;
-	else if (udc         == NULL)
-		return -ENODEV;
-	else if (udc->driver != NULL)
-		return -EBUSY;
-
-	/* alloc resources */
-	udc->qh_pool = dma_pool_create("ci13xxx_qh", &udc->gadget.dev,
-				       sizeof(struct ci13xxx_qh),
-				       64, CI13XXX_PAGE_SIZE);
-	if (udc->qh_pool == NULL)
-		return -ENOMEM;
-
-	udc->td_pool = dma_pool_create("ci13xxx_td", &udc->gadget.dev,
-				       sizeof(struct ci13xxx_td),
-				       64, CI13XXX_PAGE_SIZE);
-	if (udc->td_pool == NULL) {
-		dma_pool_destroy(udc->qh_pool);
-		udc->qh_pool = NULL;
-		return -ENOMEM;
-	}
-
-	spin_lock_irqsave(udc->lock, flags);
-
-	info("hw_ep_max = %d", hw_ep_max);
-
-	udc->gadget.dev.driver = NULL;
-
-	retval = 0;
-	for (i = 0; i < hw_ep_max/2; i++) {
-		for (j = RX; j <= TX; j++) {
-			int k = i + j * hw_ep_max/2;
-			struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k];
-
-			scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i,
-					(j == TX)  ? "in" : "out");
-
-			mEp->lock         = udc->lock;
-			mEp->device       = &udc->gadget.dev;
-			mEp->td_pool      = udc->td_pool;
-
-			mEp->ep.name      = mEp->name;
-			mEp->ep.ops       = &usb_ep_ops;
-			mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
-
-			INIT_LIST_HEAD(&mEp->qh.queue);
-			spin_unlock_irqrestore(udc->lock, flags);
-			mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL,
-					&mEp->qh.dma);
-			spin_lock_irqsave(udc->lock, flags);
-			if (mEp->qh.ptr == NULL)
-				retval = -ENOMEM;
-			else
-				memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr));
-
-			/* skip ep0 out and in endpoints */
-			if (i == 0)
-				continue;
-
-			list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list);
-		}
-	}
-	if (retval)
-		goto done;
-	spin_unlock_irqrestore(udc->lock, flags);
-	udc->ep0out.ep.desc = &ctrl_endpt_out_desc;
-	retval = usb_ep_enable(&udc->ep0out.ep);
-	if (retval)
-		return retval;
-
-	udc->ep0in.ep.desc = &ctrl_endpt_in_desc;
-	retval = usb_ep_enable(&udc->ep0in.ep);
-	if (retval)
-		return retval;
-	spin_lock_irqsave(udc->lock, flags);
-
-	udc->gadget.ep0 = &udc->ep0in.ep;
-	/* bind gadget */
-	driver->driver.bus     = NULL;
-	udc->gadget.dev.driver = &driver->driver;
-
-	spin_unlock_irqrestore(udc->lock, flags);
-	retval = bind(&udc->gadget);                /* MAY SLEEP */
-	spin_lock_irqsave(udc->lock, flags);
-
-	if (retval) {
-		udc->gadget.dev.driver = NULL;
-		goto done;
-	}
-
-	udc->driver = driver;
-	pm_runtime_get_sync(&udc->gadget.dev);
-	if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) {
-		if (udc->vbus_active) {
-			if (udc->udc_driver->flags & CI13XXX_REGS_SHARED)
-				hw_device_reset(udc);
-		} else {
-			pm_runtime_put_sync(&udc->gadget.dev);
-			goto done;
-		}
-	}
-
-	retval = hw_device_state(udc->ep0out.qh.dma);
-	if (retval)
-		pm_runtime_put_sync(&udc->gadget.dev);
-
- done:
-	spin_unlock_irqrestore(udc->lock, flags);
-	return retval;
-}
-
-/**
- * ci13xxx_stop: unregister a gadget driver
- *
- * Check usb_gadget_unregister_driver() at "usb_gadget.h" for details
- */
-static int ci13xxx_stop(struct usb_gadget_driver *driver)
-{
-	struct ci13xxx *udc = _udc;
-	unsigned long i, flags;
-
-	trace("%p", driver);
-
-	if (driver             == NULL ||
-	    driver->unbind     == NULL ||
-	    driver->setup      == NULL ||
-	    driver->disconnect == NULL ||
-	    driver             != udc->driver)
-		return -EINVAL;
-
-	spin_lock_irqsave(udc->lock, flags);
-
-	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) ||
-			udc->vbus_active) {
-		hw_device_state(0);
-		if (udc->udc_driver->notify_event)
-			udc->udc_driver->notify_event(udc,
-			CI13XXX_CONTROLLER_STOPPED_EVENT);
-		spin_unlock_irqrestore(udc->lock, flags);
-		_gadget_stop_activity(&udc->gadget);
-		spin_lock_irqsave(udc->lock, flags);
-		pm_runtime_put(&udc->gadget.dev);
-	}
-
-	/* unbind gadget */
-	spin_unlock_irqrestore(udc->lock, flags);
-	driver->unbind(&udc->gadget);               /* MAY SLEEP */
-	spin_lock_irqsave(udc->lock, flags);
-
-	udc->gadget.dev.driver = NULL;
-
-	/* free resources */
-	for (i = 0; i < hw_ep_max; i++) {
-		struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
-
-		if (!list_empty(&mEp->ep.ep_list))
-			list_del_init(&mEp->ep.ep_list);
-
-		if (mEp->qh.ptr != NULL)
-			dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma);
-	}
-
-	udc->gadget.ep0 = NULL;
-	udc->driver = NULL;
-
-	spin_unlock_irqrestore(udc->lock, flags);
-
-	if (udc->td_pool != NULL) {
-		dma_pool_destroy(udc->td_pool);
-		udc->td_pool = NULL;
-	}
-	if (udc->qh_pool != NULL) {
-		dma_pool_destroy(udc->qh_pool);
-		udc->qh_pool = NULL;
-	}
-
-	return 0;
-}
-
-/******************************************************************************
- * BUS block
- *****************************************************************************/
-/**
- * udc_irq: global interrupt handler
- *
- * This function returns IRQ_HANDLED if the IRQ has been handled
- * It locks access to registers
- */
-static irqreturn_t udc_irq(void)
-{
-	struct ci13xxx *udc = _udc;
-	irqreturn_t retval;
-	u32 intr;
-
-	trace();
-
-	if (udc == NULL) {
-		err("ENODEV");
-		return IRQ_HANDLED;
-	}
-
-	spin_lock(udc->lock);
-
-	if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) {
-		if (hw_cread(CAP_USBMODE, USBMODE_CM) !=
-				USBMODE_CM_DEVICE) {
-			spin_unlock(udc->lock);
-			return IRQ_NONE;
-		}
-	}
-	intr = hw_test_and_clear_intr_active();
-	if (intr) {
-		isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intr;
-		isr_statistics.hndl.idx &= ISR_MASK;
-		isr_statistics.hndl.cnt++;
-
-		/* order defines priority - do NOT change it */
-		if (USBi_URI & intr) {
-			isr_statistics.uri++;
-			isr_reset_handler(udc);
-		}
-		if (USBi_PCI & intr) {
-			isr_statistics.pci++;
-			udc->gadget.speed = hw_port_is_high_speed() ?
-				USB_SPEED_HIGH : USB_SPEED_FULL;
-			if (udc->suspended && udc->driver->resume) {
-				spin_unlock(udc->lock);
-				udc->driver->resume(&udc->gadget);
-				spin_lock(udc->lock);
-				udc->suspended = 0;
-			}
-		}
-		if (USBi_UEI & intr)
-			isr_statistics.uei++;
-		if (USBi_UI  & intr) {
-			isr_statistics.ui++;
-			isr_tr_complete_handler(udc);
-		}
-		if (USBi_SLI & intr) {
-			if (udc->gadget.speed != USB_SPEED_UNKNOWN &&
-			    udc->driver->suspend) {
-				udc->suspended = 1;
-				spin_unlock(udc->lock);
-				udc->driver->suspend(&udc->gadget);
-				spin_lock(udc->lock);
-			}
-			isr_statistics.sli++;
-		}
-		retval = IRQ_HANDLED;
-	} else {
-		isr_statistics.none++;
-		retval = IRQ_NONE;
-	}
-	spin_unlock(udc->lock);
-
-	return retval;
-}
-
-/**
- * udc_release: driver release function
- * @dev: device
- *
- * Currently does nothing
- */
-static void udc_release(struct device *dev)
-{
-	trace("%p", dev);
-
-	if (dev == NULL)
-		err("EINVAL");
-}
-
-/**
- * udc_probe: parent probe must call this to initialize UDC
- * @dev:  parent device
- * @regs: registers base address
- * @name: driver name
- *
- * This function returns an error code
- * No interrupts active, the IRQ has not been requested yet
- * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask
- */
-static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
-		void __iomem *regs)
-{
-	struct ci13xxx *udc;
-	int retval = 0;
-
-	trace("%p, %p, %p", dev, regs, driver->name);
-
-	if (dev == NULL || regs == NULL || driver == NULL ||
-			driver->name == NULL)
-		return -EINVAL;
-
-	udc = kzalloc(sizeof(struct ci13xxx), GFP_KERNEL);
-	if (udc == NULL)
-		return -ENOMEM;
-
-	udc->lock = &udc_lock;
-	udc->regs = regs;
-	udc->udc_driver = driver;
-
-	udc->gadget.ops          = &usb_gadget_ops;
-	udc->gadget.speed        = USB_SPEED_UNKNOWN;
-	udc->gadget.max_speed    = USB_SPEED_HIGH;
-	udc->gadget.is_otg       = 0;
-	udc->gadget.name         = driver->name;
-
-	INIT_LIST_HEAD(&udc->gadget.ep_list);
-	udc->gadget.ep0 = NULL;
-
-	dev_set_name(&udc->gadget.dev, "gadget");
-	udc->gadget.dev.dma_mask = dev->dma_mask;
-	udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
-	udc->gadget.dev.parent   = dev;
-	udc->gadget.dev.release  = udc_release;
-
-	retval = hw_device_init(regs);
-	if (retval < 0)
-		goto free_udc;
-
-	udc->transceiver = usb_get_transceiver();
-
-	if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
-		if (udc->transceiver == NULL) {
-			retval = -ENODEV;
-			goto free_udc;
-		}
-	}
-
-	if (!(udc->udc_driver->flags & CI13XXX_REGS_SHARED)) {
-		retval = hw_device_reset(udc);
-		if (retval)
-			goto put_transceiver;
-	}
-
-	retval = device_register(&udc->gadget.dev);
-	if (retval) {
-		put_device(&udc->gadget.dev);
-		goto put_transceiver;
-	}
-
-#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-	retval = dbg_create_files(&udc->gadget.dev);
-#endif
-	if (retval)
-		goto unreg_device;
-
-	if (udc->transceiver) {
-		retval = otg_set_peripheral(udc->transceiver->otg,
-						&udc->gadget);
-		if (retval)
-			goto remove_dbg;
-	}
-
-	retval = usb_add_gadget_udc(dev, &udc->gadget);
-	if (retval)
-		goto remove_trans;
-
-	pm_runtime_no_callbacks(&udc->gadget.dev);
-	pm_runtime_enable(&udc->gadget.dev);
-
-	_udc = udc;
-	return retval;
-
-remove_trans:
-	if (udc->transceiver) {
-		otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
-		usb_put_transceiver(udc->transceiver);
-	}
-
-	err("error = %i", retval);
-remove_dbg:
-#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-	dbg_remove_files(&udc->gadget.dev);
-#endif
-unreg_device:
-	device_unregister(&udc->gadget.dev);
-put_transceiver:
-	if (udc->transceiver)
-		usb_put_transceiver(udc->transceiver);
-free_udc:
-	kfree(udc);
-	_udc = NULL;
-	return retval;
-}
-
-/**
- * udc_remove: parent remove must call this to remove UDC
- *
- * No interrupts active, the IRQ has been released
- */
-static void udc_remove(void)
-{
-	struct ci13xxx *udc = _udc;
-
-	if (udc == NULL) {
-		err("EINVAL");
-		return;
-	}
-	usb_del_gadget_udc(&udc->gadget);
-
-	if (udc->transceiver) {
-		otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
-		usb_put_transceiver(udc->transceiver);
-	}
-#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-	dbg_remove_files(&udc->gadget.dev);
-#endif
-	device_unregister(&udc->gadget.dev);
-
-	kfree(udc);
-	_udc = NULL;
-}
diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h
deleted file mode 100644
index 0d31af56c989..000000000000
--- a/drivers/usb/gadget/ci13xxx_udc.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * ci13xxx_udc.h - structures, registers, and macros MIPS USB IP core
- *
- * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
- *
- * Author: David Lopo
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Description: MIPS USB IP core family device controller
- *              Structures, registers and logging macros
- */
-
-#ifndef _CI13XXX_h_
-#define _CI13XXX_h_
-
-/******************************************************************************
- * DEFINE
- *****************************************************************************/
-#define CI13XXX_PAGE_SIZE  4096ul /* page size for TD's */
-#define ENDPT_MAX          (32)
-#define CTRL_PAYLOAD_MAX   (64)
-#define RX        (0)  /* similar to USB_DIR_OUT but can be used as an index */
-#define TX        (1)  /* similar to USB_DIR_IN  but can be used as an index */
-
-/******************************************************************************
- * STRUCTURES
- *****************************************************************************/
-/* DMA layout of transfer descriptors */
-struct ci13xxx_td {
-	/* 0 */
-	u32 next;
-#define TD_TERMINATE          BIT(0)
-#define TD_ADDR_MASK          (0xFFFFFFEUL << 5)
-	/* 1 */
-	u32 token;
-#define TD_STATUS             (0x00FFUL <<  0)
-#define TD_STATUS_TR_ERR      BIT(3)
-#define TD_STATUS_DT_ERR      BIT(5)
-#define TD_STATUS_HALTED      BIT(6)
-#define TD_STATUS_ACTIVE      BIT(7)
-#define TD_MULTO              (0x0003UL << 10)
-#define TD_IOC                BIT(15)
-#define TD_TOTAL_BYTES        (0x7FFFUL << 16)
-	/* 2 */
-	u32 page[5];
-#define TD_CURR_OFFSET        (0x0FFFUL <<  0)
-#define TD_FRAME_NUM          (0x07FFUL <<  0)
-#define TD_RESERVED_MASK      (0x0FFFUL <<  0)
-} __attribute__ ((packed));
-
-/* DMA layout of queue heads */
-struct ci13xxx_qh {
-	/* 0 */
-	u32 cap;
-#define QH_IOS                BIT(15)
-#define QH_MAX_PKT            (0x07FFUL << 16)
-#define QH_ZLT                BIT(29)
-#define QH_MULT               (0x0003UL << 30)
-	/* 1 */
-	u32 curr;
-	/* 2 - 8 */
-	struct ci13xxx_td        td;
-	/* 9 */
-	u32 RESERVED;
-	struct usb_ctrlrequest   setup;
-} __attribute__ ((packed));
-
-/* Extension of usb_request */
-struct ci13xxx_req {
-	struct usb_request   req;
-	unsigned             map;
-	struct list_head     queue;
-	struct ci13xxx_td   *ptr;
-	dma_addr_t           dma;
-	struct ci13xxx_td   *zptr;
-	dma_addr_t           zdma;
-};
-
-/* Extension of usb_ep */
-struct ci13xxx_ep {
-	struct usb_ep                          ep;
-	const struct usb_endpoint_descriptor  *desc;
-	u8                                     dir;
-	u8                                     num;
-	u8                                     type;
-	char                                   name[16];
-	struct {
-		struct list_head   queue;
-		struct ci13xxx_qh *ptr;
-		dma_addr_t         dma;
-	}                                      qh;
-	int                                    wedge;
-
-	/* global resources */
-	spinlock_t                            *lock;
-	struct device                         *device;
-	struct dma_pool                       *td_pool;
-};
-
-struct ci13xxx;
-struct ci13xxx_udc_driver {
-	const char	*name;
-	unsigned long	 flags;
-#define CI13XXX_REGS_SHARED		BIT(0)
-#define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-#define CI13XXX_PULLUP_ON_VBUS		BIT(2)
-#define CI13XXX_DISABLE_STREAMING	BIT(3)
-
-#define CI13XXX_CONTROLLER_RESET_EVENT		0
-#define CI13XXX_CONTROLLER_STOPPED_EVENT	1
-	void	(*notify_event) (struct ci13xxx *udc, unsigned event);
-};
-
-/* CI13XXX UDC descriptor & global resources */
-struct ci13xxx {
-	spinlock_t		  *lock;      /* ctrl register bank access */
-	void __iomem              *regs;      /* registers address space */
-
-	struct dma_pool           *qh_pool;   /* DMA pool for queue heads */
-	struct dma_pool           *td_pool;   /* DMA pool for transfer descs */
-	struct usb_request        *status;    /* ep0 status request */
-
-	struct usb_gadget          gadget;     /* USB slave device */
-	struct ci13xxx_ep          ci13xxx_ep[ENDPT_MAX]; /* extended endpts */
-	u32                        ep0_dir;    /* ep0 direction */
-#define ep0out ci13xxx_ep[0]
-#define ep0in  ci13xxx_ep[hw_ep_max / 2]
-	u8                         remote_wakeup; /* Is remote wakeup feature
-							enabled by the host? */
-	u8                         suspended;  /* suspended by the host */
-	u8                         test_mode;  /* the selected test mode */
-
-	struct usb_gadget_driver  *driver;     /* 3rd party gadget driver */
-	struct ci13xxx_udc_driver *udc_driver; /* device controller driver */
-	int                        vbus_active; /* is VBUS active */
-	struct usb_phy            *transceiver; /* Transceiver struct */
-};
-
-/******************************************************************************
- * REGISTERS
- *****************************************************************************/
-/* register size */
-#define REG_BITS   (32)
-
-/* HCCPARAMS */
-#define HCCPARAMS_LEN         BIT(17)
-
-/* DCCPARAMS */
-#define DCCPARAMS_DEN         (0x1F << 0)
-#define DCCPARAMS_DC          BIT(7)
-
-/* TESTMODE */
-#define TESTMODE_FORCE        BIT(0)
-
-/* USBCMD */
-#define USBCMD_RS             BIT(0)
-#define USBCMD_RST            BIT(1)
-#define USBCMD_SUTW           BIT(13)
-#define USBCMD_ATDTW          BIT(14)
-
-/* USBSTS & USBINTR */
-#define USBi_UI               BIT(0)
-#define USBi_UEI              BIT(1)
-#define USBi_PCI              BIT(2)
-#define USBi_URI              BIT(6)
-#define USBi_SLI              BIT(8)
-
-/* DEVICEADDR */
-#define DEVICEADDR_USBADRA    BIT(24)
-#define DEVICEADDR_USBADR     (0x7FUL << 25)
-
-/* PORTSC */
-#define PORTSC_FPR            BIT(6)
-#define PORTSC_SUSP           BIT(7)
-#define PORTSC_HSP            BIT(9)
-#define PORTSC_PTC            (0x0FUL << 16)
-
-/* DEVLC */
-#define DEVLC_PSPD            (0x03UL << 25)
-#define    DEVLC_PSPD_HS      (0x02UL << 25)
-
-/* USBMODE */
-#define USBMODE_CM            (0x03UL <<  0)
-#define    USBMODE_CM_IDLE    (0x00UL <<  0)
-#define    USBMODE_CM_DEVICE  (0x02UL <<  0)
-#define    USBMODE_CM_HOST    (0x03UL <<  0)
-#define USBMODE_SLOM          BIT(3)
-#define USBMODE_SDIS          BIT(4)
-
-/* ENDPTCTRL */
-#define ENDPTCTRL_RXS         BIT(0)
-#define ENDPTCTRL_RXT         (0x03UL <<  2)
-#define ENDPTCTRL_RXR         BIT(6)         /* reserved for port 0 */
-#define ENDPTCTRL_RXE         BIT(7)
-#define ENDPTCTRL_TXS         BIT(16)
-#define ENDPTCTRL_TXT         (0x03UL << 18)
-#define ENDPTCTRL_TXR         BIT(22)        /* reserved for port 0 */
-#define ENDPTCTRL_TXE         BIT(23)
-
-/******************************************************************************
- * LOGGING
- *****************************************************************************/
-#define ci13xxx_printk(level, format, args...) \
-do { \
-	if (_udc == NULL) \
-		printk(level "[%s] " format "\n", __func__, ## args); \
-	else \
-		dev_printk(level, _udc->gadget.dev.parent, \
-			   "[%s] " format "\n", __func__, ## args); \
-} while (0)
-
-#define err(format, args...)    ci13xxx_printk(KERN_ERR, format, ## args)
-#define warn(format, args...)   ci13xxx_printk(KERN_WARNING, format, ## args)
-#define info(format, args...)   ci13xxx_printk(KERN_INFO, format, ## args)
-
-#ifdef TRACE
-#define trace(format, args...)      ci13xxx_printk(KERN_DEBUG, format, ## args)
-#define dbg_trace(format, args...)  dev_dbg(dev, format, ##args)
-#else
-#define trace(format, args...)      do {} while (0)
-#define dbg_trace(format, args...)  do {} while (0)
-#endif
-
-#endif	/* _CI13XXX_h_ */
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index baaebf2830fc..390749bbb0c3 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -40,27 +40,27 @@ static int (*composite_gadget_bind)(struct usb_composite_dev *cdev);
  */
 
 static ushort idVendor;
-module_param(idVendor, ushort, 0);
+module_param(idVendor, ushort, 0644);
 MODULE_PARM_DESC(idVendor, "USB Vendor ID");
 
 static ushort idProduct;
-module_param(idProduct, ushort, 0);
+module_param(idProduct, ushort, 0644);
 MODULE_PARM_DESC(idProduct, "USB Product ID");
 
 static ushort bcdDevice;
-module_param(bcdDevice, ushort, 0);
+module_param(bcdDevice, ushort, 0644);
 MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
 
 static char *iManufacturer;
-module_param(iManufacturer, charp, 0);
+module_param(iManufacturer, charp, 0644);
 MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
 
 static char *iProduct;
-module_param(iProduct, charp, 0);
+module_param(iProduct, charp, 0644);
 MODULE_PARM_DESC(iProduct, "USB Product string");
 
 static char *iSerialNumber;
-module_param(iSerialNumber, charp, 0);
+module_param(iSerialNumber, charp, 0644);
 MODULE_PARM_DESC(iSerialNumber, "SerialNumber string");
 
 static char composite_manufacturer[50];
@@ -734,9 +734,23 @@ int usb_add_config(struct usb_composite_dev *cdev,
 
 	INIT_LIST_HEAD(&config->functions);
 	config->next_interface_id = 0;
+	memset(config->interface, 0, sizeof(config->interface));
 
 	status = bind(config);
 	if (status < 0) {
+		while (!list_empty(&config->functions)) {
+			struct usb_function		*f;
+
+			f = list_first_entry(&config->functions,
+					struct usb_function, list);
+			list_del(&f->list);
+			if (f->unbind) {
+				DBG(cdev, "unbind function '%s'/%p\n",
+					f->name, f);
+				f->unbind(config, f);
+				/* may free memory for "f" */
+			}
+		}
 		list_del(&config->list);
 		config->cdev = NULL;
 	} else {
@@ -774,6 +788,53 @@ done:
 	return status;
 }
 
+static void remove_config(struct usb_composite_dev *cdev,
+			      struct usb_configuration *config)
+{
+	while (!list_empty(&config->functions)) {
+		struct usb_function		*f;
+
+		f = list_first_entry(&config->functions,
+				struct usb_function, list);
+		list_del(&f->list);
+		if (f->unbind) {
+			DBG(cdev, "unbind function '%s'/%p\n", f->name, f);
+			f->unbind(config, f);
+			/* may free memory for "f" */
+		}
+	}
+	list_del(&config->list);
+	if (config->unbind) {
+		DBG(cdev, "unbind config '%s'/%p\n", config->label, config);
+		config->unbind(config);
+			/* may free memory for "c" */
+	}
+}
+
+/**
+ * usb_remove_config() - remove a configuration from a device.
+ * @cdev: wraps the USB gadget
+ * @config: the configuration
+ *
+ * Drivers must call usb_gadget_disconnect before calling this function
+ * to disconnect the device from the host and make sure the host will not
+ * try to enumerate the device while we are changing the config list.
+ */
+void usb_remove_config(struct usb_composite_dev *cdev,
+		      struct usb_configuration *config)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cdev->lock, flags);
+
+	if (cdev->config == config)
+		reset_config(cdev);
+
+	spin_unlock_irqrestore(&cdev->lock, flags);
+
+	remove_config(cdev, config);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* We support strings in multiple languages ... string descriptor zero
@@ -785,7 +846,7 @@ done:
 static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf)
 {
 	const struct usb_gadget_strings	*s;
-	u16				language;
+	__le16				language;
 	__le16				*tmp;
 
 	while (*sp) {
@@ -877,7 +938,7 @@ static int get_string(struct usb_composite_dev *cdev,
 	else if (cdev->product_override == id)
 		str = iProduct ?: composite->iProduct;
 	else if (cdev->serial_override == id)
-		str = iSerialNumber;
+		str = iSerialNumber ?: composite->iSerialNumber;
 	else
 		str = NULL;
 	if (str) {
@@ -1328,28 +1389,9 @@ composite_unbind(struct usb_gadget *gadget)
 
 	while (!list_empty(&cdev->configs)) {
 		struct usb_configuration	*c;
-
 		c = list_first_entry(&cdev->configs,
 				struct usb_configuration, list);
-		while (!list_empty(&c->functions)) {
-			struct usb_function		*f;
-
-			f = list_first_entry(&c->functions,
-					struct usb_function, list);
-			list_del(&f->list);
-			if (f->unbind) {
-				DBG(cdev, "unbind function '%s'/%p\n",
-						f->name, f);
-				f->unbind(c, f);
-				/* may free memory for "f" */
-			}
-		}
-		list_del(&c->list);
-		if (c->unbind) {
-			DBG(cdev, "unbind config '%s'/%p\n", c->label, c);
-			c->unbind(c);
-			/* may free memory for "c" */
-		}
+		remove_config(cdev, c);
 	}
 	if (composite->unbind)
 		composite->unbind(cdev);
@@ -1431,10 +1473,16 @@ static int composite_bind(struct usb_gadget *gadget)
 	/* standardized runtime overrides for device ID data */
 	if (idVendor)
 		cdev->desc.idVendor = cpu_to_le16(idVendor);
+	else
+		idVendor = le16_to_cpu(cdev->desc.idVendor);
 	if (idProduct)
 		cdev->desc.idProduct = cpu_to_le16(idProduct);
+	else
+		idProduct = le16_to_cpu(cdev->desc.idProduct);
 	if (bcdDevice)
 		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
+	else
+		bcdDevice = le16_to_cpu(cdev->desc.bcdDevice);
 
 	/* string overrides */
 	if (iManufacturer || !cdev->desc.iManufacturer) {
@@ -1455,7 +1503,8 @@ static int composite_bind(struct usb_gadget *gadget)
 		cdev->product_override =
 			override_id(cdev, &cdev->desc.iProduct);
 
-	if (iSerialNumber)
+	if (iSerialNumber ||
+	    (!cdev->desc.iSerialNumber && composite->iSerialNumber))
 		cdev->serial_override =
 			override_id(cdev, &cdev->desc.iSerialNumber);
 
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 170cbe89d9f8..b799106027ad 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -595,14 +595,12 @@ static struct usb_request *dummy_alloc_request(struct usb_ep *_ep,
 
 static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req)
 {
-	struct dummy_ep		*ep;
 	struct dummy_request	*req;
 
-	if (!_ep || !_req)
-		return;
-	ep = usb_ep_to_dummy_ep(_ep);
-	if (!ep->desc && _ep->name != ep0name)
+	if (!_ep || !_req) {
+		WARN_ON(1);
 		return;
+	}
 
 	req = usb_request_to_dummy_request(_req);
 	WARN_ON(!list_empty(&req->queue));
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index f52cb1ae45d9..dcd1c7fbb016 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1031,6 +1031,12 @@ struct ffs_sb_fill_data {
 	struct ffs_file_perms perms;
 	umode_t root_mode;
 	const char *dev_name;
+	union {
+		/* set by ffs_fs_mount(), read by ffs_sb_fill() */
+		void *private_data;
+		/* set by ffs_sb_fill(), read by ffs_fs_mount */
+		struct ffs_data *ffs_data;
+	};
 };
 
 static int ffs_sb_fill(struct super_block *sb, void *_data, int silent)
@@ -1047,8 +1053,14 @@ static int ffs_sb_fill(struct super_block *sb, void *_data, int silent)
 		goto Enomem;
 
 	ffs->sb              = sb;
-	ffs->dev_name        = data->dev_name;
+	ffs->dev_name        = kstrdup(data->dev_name, GFP_KERNEL);
+	if (unlikely(!ffs->dev_name))
+		goto Enomem;
 	ffs->file_perms      = data->perms;
+	ffs->private_data    = data->private_data;
+
+	/* used by the caller of this function */
+	data->ffs_data       = ffs;
 
 	sb->s_fs_info        = ffs;
 	sb->s_blocksize      = PAGE_CACHE_SIZE;
@@ -1167,20 +1179,29 @@ ffs_fs_mount(struct file_system_type *t, int flags,
 		},
 		.root_mode = S_IFDIR | 0500,
 	};
+	struct dentry *rv;
 	int ret;
+	void *ffs_dev;
 
 	ENTER();
 
-	ret = functionfs_check_dev_callback(dev_name);
-	if (unlikely(ret < 0))
-		return ERR_PTR(ret);
-
 	ret = ffs_fs_parse_opts(&data, opts);
 	if (unlikely(ret < 0))
 		return ERR_PTR(ret);
 
+	ffs_dev = functionfs_acquire_dev_callback(dev_name);
+	if (IS_ERR(ffs_dev))
+		return ffs_dev;
+
 	data.dev_name = dev_name;
-	return mount_single(t, flags, &data, ffs_sb_fill);
+	data.private_data = ffs_dev;
+	rv = mount_nodev(t, flags, &data, ffs_sb_fill);
+
+	/* data.ffs_data is set by ffs_sb_fill */
+	if (IS_ERR(rv))
+		functionfs_release_dev_callback(data.ffs_data);
+
+	return rv;
 }
 
 static void
@@ -1189,8 +1210,10 @@ ffs_fs_kill_sb(struct super_block *sb)
 	ENTER();
 
 	kill_litter_super(sb);
-	if (sb->s_fs_info)
+	if (sb->s_fs_info) {
+		functionfs_release_dev_callback(sb->s_fs_info);
 		ffs_data_put(sb->s_fs_info);
+	}
 }
 
 static struct file_system_type ffs_fs_type = {
@@ -1256,6 +1279,7 @@ static void ffs_data_put(struct ffs_data *ffs)
 		ffs_data_clear(ffs);
 		BUG_ON(waitqueue_active(&ffs->ev.waitq) ||
 		       waitqueue_active(&ffs->ep0req_completion.wait));
+		kfree(ffs->dev_name);
 		kfree(ffs);
 	}
 }
@@ -1473,8 +1497,22 @@ static int functionfs_bind_config(struct usb_composite_dev *cdev,
 
 static void ffs_func_free(struct ffs_function *func)
 {
+	struct ffs_ep *ep         = func->eps;
+	unsigned count            = func->ffs->eps_count;
+	unsigned long flags;
+
 	ENTER();
 
+	/* cleanup after autoconfig */
+	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	do {
+		if (ep->ep && ep->req)
+			usb_ep_free_request(ep->ep, ep->req);
+		ep->req = NULL;
+		++ep;
+	} while (--count);
+	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
+
 	ffs_data_put(func->ffs);
 
 	kfree(func->eps);
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index b2113420b806..3b3932c55361 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -374,7 +374,7 @@ static int hidg_setup(struct usb_function *f,
 			break;
 
 		default:
-			VDBG(cdev, "Unknown decriptor request 0x%x\n",
+			VDBG(cdev, "Unknown descriptor request 0x%x\n",
 				 value >> 8);
 			goto stall;
 			break;
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index 2c0cd824c667..7275706caeb0 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -286,7 +286,7 @@ static void disable_loopback(struct f_loopback *loop)
 	struct usb_composite_dev	*cdev;
 
 	cdev = loop->function.config->cdev;
-	disable_endpoints(cdev, loop->in_ep, loop->out_ep);
+	disable_endpoints(cdev, loop->in_ep, loop->out_ep, NULL, NULL);
 	VDBG(cdev, "%s disabled\n", loop->function.name);
 }
 
@@ -329,7 +329,7 @@ fail0:
 	 * than 'buflen' bytes each.
 	 */
 	for (i = 0; i < qlen && result == 0; i++) {
-		req = alloc_ep_req(ep);
+		req = alloc_ep_req(ep, 0);
 		if (req) {
 			req->complete = loopback_complete;
 			result = usb_ep_queue(ep, req, GFP_ATOMIC);
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index cb8c162cae5a..f67b453740bd 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -3110,13 +3110,6 @@ static int fsg_bind_config(struct usb_composite_dev *cdev,
 	return rc;
 }
 
-static inline int __deprecated __maybe_unused
-fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c,
-	struct fsg_common *common)
-{
-	return fsg_bind_config(cdev, c, common);
-}
-
 
 /************************* Module parameters *************************/
 
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index d4f823f463e9..b1681e45aca7 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -71,6 +71,8 @@ struct f_rndis {
 	struct gether			port;
 	u8				ctrl_id, data_id;
 	u8				ethaddr[ETH_ALEN];
+	u32				vendorID;
+	const char			*manufacturer;
 	int				config;
 
 	struct usb_ep			*notify;
@@ -768,12 +770,10 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 	rndis_set_param_medium(rndis->config, RNDIS_MEDIUM_802_3, 0);
 	rndis_set_host_mac(rndis->config, rndis->ethaddr);
 
-#if 0
-// FIXME
-	if (rndis_set_param_vendor(rndis->config, vendorID,
-				manufacturer))
-		goto fail0;
-#endif
+	if (rndis->manufacturer && rndis->vendorID &&
+			rndis_set_param_vendor(rndis->config, rndis->vendorID,
+					       rndis->manufacturer))
+		goto fail;
 
 	/* NOTE:  all that is done without knowing or caring about
 	 * the network link ... which is unavailable to this code
@@ -820,6 +820,7 @@ rndis_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	rndis_deregister(rndis->config);
 	rndis_exit();
+	rndis_string_defs[0].id = 0;
 
 	if (gadget_is_superspeed(c->cdev->gadget))
 		usb_free_descriptors(f->ss_descriptors);
@@ -840,20 +841,9 @@ static inline bool can_support_rndis(struct usb_configuration *c)
 	return true;
 }
 
-/**
- * rndis_bind_config - add RNDIS network link to a configuration
- * @c: the configuration to support the network link
- * @ethaddr: a buffer in which the ethernet address of the host side
- *	side of the link was recorded
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- *
- * Caller must have called @gether_setup().  Caller is also responsible
- * for calling @gether_cleanup() before module unload.
- */
 int
-rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+				u32 vendorID, const char *manufacturer)
 {
 	struct f_rndis	*rndis;
 	int		status;
@@ -898,6 +888,8 @@ rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 		goto fail;
 
 	memcpy(rndis->ethaddr, ethaddr, ETH_ALEN);
+	rndis->vendorID = vendorID;
+	rndis->manufacturer = manufacturer;
 
 	/* RNDIS activates when the host changes this filter */
 	rndis->port.cdc_filter = 0;
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index 7aa7ac82c02c..5c1b68b63c98 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -51,6 +51,9 @@ struct f_sourcesink {
 
 	struct usb_ep		*in_ep;
 	struct usb_ep		*out_ep;
+	struct usb_ep		*iso_in_ep;
+	struct usb_ep		*iso_out_ep;
+	int			cur_alt;
 };
 
 static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
@@ -59,18 +62,45 @@ static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
 }
 
 static unsigned pattern;
-module_param(pattern, uint, 0);
-MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63 ");
+module_param(pattern, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63, 2 = none");
+
+static unsigned isoc_interval = 4;
+module_param(isoc_interval, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_interval, "1 - 16");
+
+static unsigned isoc_maxpacket = 1024;
+module_param(isoc_maxpacket, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
+
+static unsigned isoc_mult;
+module_param(isoc_mult, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_mult, "0 - 2 (hs/ss only)");
+
+static unsigned isoc_maxburst;
+module_param(isoc_maxburst, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)");
 
 /*-------------------------------------------------------------------------*/
 
-static struct usb_interface_descriptor source_sink_intf = {
-	.bLength =		sizeof source_sink_intf,
+static struct usb_interface_descriptor source_sink_intf_alt0 = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
+	.bAlternateSetting =	0,
 	.bNumEndpoints =	2,
 	.bInterfaceClass =	USB_CLASS_VENDOR_SPEC,
-	/* .iInterface = DYNAMIC */
+	/* .iInterface		= DYNAMIC */
+};
+
+static struct usb_interface_descriptor source_sink_intf_alt1 = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	4,
+	.bInterfaceClass =	USB_CLASS_VENDOR_SPEC,
+	/* .iInterface		= DYNAMIC */
 };
 
 /* full speed support: */
@@ -91,10 +121,36 @@ static struct usb_endpoint_descriptor fs_sink_desc = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 };
 
+static struct usb_endpoint_descriptor fs_iso_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1023),
+	.bInterval =		4,
+};
+
+static struct usb_endpoint_descriptor fs_iso_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1023),
+	.bInterval =		4,
+};
+
 static struct usb_descriptor_header *fs_source_sink_descs[] = {
-	(struct usb_descriptor_header *) &source_sink_intf,
+	(struct usb_descriptor_header *) &source_sink_intf_alt0,
 	(struct usb_descriptor_header *) &fs_sink_desc,
 	(struct usb_descriptor_header *) &fs_source_desc,
+	(struct usb_descriptor_header *) &source_sink_intf_alt1,
+#define FS_ALT_IFC_1_OFFSET	3
+	(struct usb_descriptor_header *) &fs_sink_desc,
+	(struct usb_descriptor_header *) &fs_source_desc,
+	(struct usb_descriptor_header *) &fs_iso_sink_desc,
+	(struct usb_descriptor_header *) &fs_iso_source_desc,
 	NULL,
 };
 
@@ -116,10 +172,34 @@ static struct usb_endpoint_descriptor hs_sink_desc = {
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
+static struct usb_endpoint_descriptor hs_iso_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		4,
+};
+
+static struct usb_endpoint_descriptor hs_iso_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		4,
+};
+
 static struct usb_descriptor_header *hs_source_sink_descs[] = {
-	(struct usb_descriptor_header *) &source_sink_intf,
+	(struct usb_descriptor_header *) &source_sink_intf_alt0,
 	(struct usb_descriptor_header *) &hs_source_desc,
 	(struct usb_descriptor_header *) &hs_sink_desc,
+	(struct usb_descriptor_header *) &source_sink_intf_alt1,
+#define HS_ALT_IFC_1_OFFSET	3
+	(struct usb_descriptor_header *) &hs_source_desc,
+	(struct usb_descriptor_header *) &hs_sink_desc,
+	(struct usb_descriptor_header *) &hs_iso_source_desc,
+	(struct usb_descriptor_header *) &hs_iso_sink_desc,
 	NULL,
 };
 
@@ -136,6 +216,7 @@ static struct usb_endpoint_descriptor ss_source_desc = {
 struct usb_ss_ep_comp_descriptor ss_source_comp_desc = {
 	.bLength =		USB_DT_SS_EP_COMP_SIZE,
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
 	.bMaxBurst =		0,
 	.bmAttributes =		0,
 	.wBytesPerInterval =	0,
@@ -152,17 +233,64 @@ static struct usb_endpoint_descriptor ss_sink_desc = {
 struct usb_ss_ep_comp_descriptor ss_sink_comp_desc = {
 	.bLength =		USB_DT_SS_EP_COMP_SIZE,
 	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
 	.bMaxBurst =		0,
 	.bmAttributes =		0,
 	.wBytesPerInterval =	0,
 };
 
+static struct usb_endpoint_descriptor ss_iso_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		4,
+};
+
+struct usb_ss_ep_comp_descriptor ss_iso_source_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_iso_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		4,
+};
+
+struct usb_ss_ep_comp_descriptor ss_iso_sink_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	cpu_to_le16(1024),
+};
+
 static struct usb_descriptor_header *ss_source_sink_descs[] = {
-	(struct usb_descriptor_header *) &source_sink_intf,
+	(struct usb_descriptor_header *) &source_sink_intf_alt0,
 	(struct usb_descriptor_header *) &ss_source_desc,
 	(struct usb_descriptor_header *) &ss_source_comp_desc,
 	(struct usb_descriptor_header *) &ss_sink_desc,
 	(struct usb_descriptor_header *) &ss_sink_comp_desc,
+	(struct usb_descriptor_header *) &source_sink_intf_alt1,
+#define SS_ALT_IFC_1_OFFSET	5
+	(struct usb_descriptor_header *) &ss_source_desc,
+	(struct usb_descriptor_header *) &ss_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_sink_desc,
+	(struct usb_descriptor_header *) &ss_sink_comp_desc,
+	(struct usb_descriptor_header *) &ss_iso_source_desc,
+	(struct usb_descriptor_header *) &ss_iso_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_iso_sink_desc,
+	(struct usb_descriptor_header *) &ss_iso_sink_comp_desc,
 	NULL,
 };
 
@@ -196,9 +324,10 @@ sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
 	id = usb_interface_id(c, f);
 	if (id < 0)
 		return id;
-	source_sink_intf.bInterfaceNumber = id;
+	source_sink_intf_alt0.bInterfaceNumber = id;
+	source_sink_intf_alt1.bInterfaceNumber = id;
 
-	/* allocate endpoints */
+	/* allocate bulk endpoints */
 	ss->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc);
 	if (!ss->in_ep) {
 autoconf_fail:
@@ -213,12 +342,74 @@ autoconf_fail:
 		goto autoconf_fail;
 	ss->out_ep->driver_data = cdev;	/* claim */
 
+	/* sanity check the isoc module parameters */
+	if (isoc_interval < 1)
+		isoc_interval = 1;
+	if (isoc_interval > 16)
+		isoc_interval = 16;
+	if (isoc_mult > 2)
+		isoc_mult = 2;
+	if (isoc_maxburst > 15)
+		isoc_maxburst = 15;
+
+	/* fill in the FS isoc descriptors from the module parameters */
+	fs_iso_source_desc.wMaxPacketSize = isoc_maxpacket > 1023 ?
+						1023 : isoc_maxpacket;
+	fs_iso_source_desc.bInterval = isoc_interval;
+	fs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket > 1023 ?
+						1023 : isoc_maxpacket;
+	fs_iso_sink_desc.bInterval = isoc_interval;
+
+	/* allocate iso endpoints */
+	ss->iso_in_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_source_desc);
+	if (!ss->iso_in_ep)
+		goto no_iso;
+	ss->iso_in_ep->driver_data = cdev;	/* claim */
+
+	ss->iso_out_ep = usb_ep_autoconfig(cdev->gadget, &fs_iso_sink_desc);
+	if (ss->iso_out_ep) {
+		ss->iso_out_ep->driver_data = cdev;	/* claim */
+	} else {
+		ss->iso_in_ep->driver_data = NULL;
+		ss->iso_in_ep = NULL;
+no_iso:
+		/*
+		 * We still want to work even if the UDC doesn't have isoc
+		 * endpoints, so null out the alt interface that contains
+		 * them and continue.
+		 */
+		fs_source_sink_descs[FS_ALT_IFC_1_OFFSET] = NULL;
+		hs_source_sink_descs[HS_ALT_IFC_1_OFFSET] = NULL;
+		ss_source_sink_descs[SS_ALT_IFC_1_OFFSET] = NULL;
+	}
+
+	if (isoc_maxpacket > 1024)
+		isoc_maxpacket = 1024;
+
 	/* support high speed hardware */
 	if (gadget_is_dualspeed(c->cdev->gadget)) {
 		hs_source_desc.bEndpointAddress =
 				fs_source_desc.bEndpointAddress;
 		hs_sink_desc.bEndpointAddress =
 				fs_sink_desc.bEndpointAddress;
+
+		/*
+		 * Fill in the HS isoc descriptors from the module parameters.
+		 * We assume that the user knows what they are doing and won't
+		 * give parameters that their UDC doesn't support.
+		 */
+		hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
+		hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11;
+		hs_iso_source_desc.bInterval = isoc_interval;
+		hs_iso_source_desc.bEndpointAddress =
+				fs_iso_source_desc.bEndpointAddress;
+
+		hs_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
+		hs_iso_sink_desc.wMaxPacketSize |= isoc_mult << 11;
+		hs_iso_sink_desc.bInterval = isoc_interval;
+		hs_iso_sink_desc.bEndpointAddress =
+				fs_iso_sink_desc.bEndpointAddress;
+
 		f->hs_descriptors = hs_source_sink_descs;
 	}
 
@@ -228,13 +419,39 @@ autoconf_fail:
 				fs_source_desc.bEndpointAddress;
 		ss_sink_desc.bEndpointAddress =
 				fs_sink_desc.bEndpointAddress;
+
+		/*
+		 * Fill in the SS isoc descriptors from the module parameters.
+		 * We assume that the user knows what they are doing and won't
+		 * give parameters that their UDC doesn't support.
+		 */
+		ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
+		ss_iso_source_desc.bInterval = isoc_interval;
+		ss_iso_source_comp_desc.bmAttributes = isoc_mult;
+		ss_iso_source_comp_desc.bMaxBurst = isoc_maxburst;
+		ss_iso_source_comp_desc.wBytesPerInterval =
+			isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
+		ss_iso_source_desc.bEndpointAddress =
+				fs_iso_source_desc.bEndpointAddress;
+
+		ss_iso_sink_desc.wMaxPacketSize = isoc_maxpacket;
+		ss_iso_sink_desc.bInterval = isoc_interval;
+		ss_iso_sink_comp_desc.bmAttributes = isoc_mult;
+		ss_iso_sink_comp_desc.bMaxBurst = isoc_maxburst;
+		ss_iso_sink_comp_desc.wBytesPerInterval =
+			isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
+		ss_iso_sink_desc.bEndpointAddress =
+				fs_iso_sink_desc.bEndpointAddress;
+
 		f->ss_descriptors = ss_source_sink_descs;
 	}
 
-	DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
+	DBG(cdev, "%s speed %s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s\n",
 	    (gadget_is_superspeed(c->cdev->gadget) ? "super" :
 	     (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")),
-			f->name, ss->in_ep->name, ss->out_ep->name);
+			f->name, ss->in_ep->name, ss->out_ep->name,
+			ss->iso_in_ep ? ss->iso_in_ep->name : "<none>",
+			ss->iso_out_ep ? ss->iso_out_ep->name : "<none>");
 	return 0;
 }
 
@@ -251,6 +468,9 @@ static int check_read_data(struct f_sourcesink *ss, struct usb_request *req)
 	u8			*buf = req->buf;
 	struct usb_composite_dev *cdev = ss->function.config->cdev;
 
+	if (pattern == 2)
+		return 0;
+
 	for (i = 0; i < req->actual; i++, buf++) {
 		switch (pattern) {
 
@@ -265,7 +485,7 @@ static int check_read_data(struct f_sourcesink *ss, struct usb_request *req)
 		 * each usb transfer request should be.  Resync is done
 		 * with set_interface or set_config.  (We *WANT* it to
 		 * get quickly out of sync if controllers or their drivers
-		 * stutter for any reason, including buffer duplcation...)
+		 * stutter for any reason, including buffer duplication...)
 		 */
 		case 1:
 			if (*buf == (u8)(i % 63))
@@ -292,21 +512,30 @@ static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
 		for  (i = 0; i < req->length; i++)
 			*buf++ = (u8) (i % 63);
 		break;
+	case 2:
+		break;
 	}
 }
 
 static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
 {
-	struct f_sourcesink	*ss = ep->driver_data;
-	struct usb_composite_dev *cdev = ss->function.config->cdev;
-	int			status = req->status;
+	struct usb_composite_dev	*cdev;
+	struct f_sourcesink		*ss = ep->driver_data;
+	int				status = req->status;
+
+	/* driver_data will be null if ep has been disabled */
+	if (!ss)
+		return;
+
+	cdev = ss->function.config->cdev;
 
 	switch (status) {
 
 	case 0:				/* normal completion? */
 		if (ep == ss->out_ep) {
 			check_read_data(ss, req);
-			memset(req->buf, 0x55, req->length);
+			if (pattern != 2)
+				memset(req->buf, 0x55, req->length);
 		} else
 			reinit_write_data(ep, req);
 		break;
@@ -344,32 +573,57 @@ static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
 	}
 }
 
-static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in)
+static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in,
+		bool is_iso, int speed)
 {
 	struct usb_ep		*ep;
 	struct usb_request	*req;
-	int			status;
+	int			i, size, status;
+
+	for (i = 0; i < 8; i++) {
+		if (is_iso) {
+			switch (speed) {
+			case USB_SPEED_SUPER:
+				size = isoc_maxpacket * (isoc_mult + 1) *
+						(isoc_maxburst + 1);
+				break;
+			case USB_SPEED_HIGH:
+				size = isoc_maxpacket * (isoc_mult + 1);
+				break;
+			default:
+				size = isoc_maxpacket > 1023 ?
+						1023 : isoc_maxpacket;
+				break;
+			}
+			ep = is_in ? ss->iso_in_ep : ss->iso_out_ep;
+			req = alloc_ep_req(ep, size);
+		} else {
+			ep = is_in ? ss->in_ep : ss->out_ep;
+			req = alloc_ep_req(ep, 0);
+		}
 
-	ep = is_in ? ss->in_ep : ss->out_ep;
-	req = alloc_ep_req(ep);
-	if (!req)
-		return -ENOMEM;
+		if (!req)
+			return -ENOMEM;
 
-	req->complete = source_sink_complete;
-	if (is_in)
-		reinit_write_data(ep, req);
-	else
-		memset(req->buf, 0x55, req->length);
+		req->complete = source_sink_complete;
+		if (is_in)
+			reinit_write_data(ep, req);
+		else if (pattern != 2)
+			memset(req->buf, 0x55, req->length);
 
-	status = usb_ep_queue(ep, req, GFP_ATOMIC);
-	if (status) {
-		struct usb_composite_dev	*cdev;
+		status = usb_ep_queue(ep, req, GFP_ATOMIC);
+		if (status) {
+			struct usb_composite_dev	*cdev;
 
-		cdev = ss->function.config->cdev;
-		ERROR(cdev, "start %s %s --> %d\n",
-				is_in ? "IN" : "OUT",
-				ep->name, status);
-		free_ep_req(ep, req);
+			cdev = ss->function.config->cdev;
+			ERROR(cdev, "start %s%s %s --> %d\n",
+			      is_iso ? "ISO-" : "", is_in ? "IN" : "OUT",
+			      ep->name, status);
+			free_ep_req(ep, req);
+		}
+
+		if (!is_iso)
+			break;
 	}
 
 	return status;
@@ -380,17 +634,20 @@ static void disable_source_sink(struct f_sourcesink *ss)
 	struct usb_composite_dev	*cdev;
 
 	cdev = ss->function.config->cdev;
-	disable_endpoints(cdev, ss->in_ep, ss->out_ep);
+	disable_endpoints(cdev, ss->in_ep, ss->out_ep, ss->iso_in_ep,
+			ss->iso_out_ep);
 	VDBG(cdev, "%s disabled\n", ss->function.name);
 }
 
 static int
-enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss)
+enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss,
+		int alt)
 {
 	int					result = 0;
+	int					speed = cdev->gadget->speed;
 	struct usb_ep				*ep;
 
-	/* one endpoint writes (sources) zeroes IN (to the host) */
+	/* one bulk endpoint writes (sources) zeroes IN (to the host) */
 	ep = ss->in_ep;
 	result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
 	if (result)
@@ -400,7 +657,7 @@ enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss)
 		return result;
 	ep->driver_data = ss;
 
-	result = source_sink_start_ep(ss, true);
+	result = source_sink_start_ep(ss, true, false, speed);
 	if (result < 0) {
 fail:
 		ep = ss->in_ep;
@@ -409,7 +666,7 @@ fail:
 		return result;
 	}
 
-	/* one endpoint reads (sinks) anything OUT (from the host) */
+	/* one bulk endpoint reads (sinks) anything OUT (from the host) */
 	ep = ss->out_ep;
 	result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
 	if (result)
@@ -419,27 +676,82 @@ fail:
 		goto fail;
 	ep->driver_data = ss;
 
-	result = source_sink_start_ep(ss, false);
+	result = source_sink_start_ep(ss, false, false, speed);
 	if (result < 0) {
+fail2:
+		ep = ss->out_ep;
 		usb_ep_disable(ep);
 		ep->driver_data = NULL;
 		goto fail;
 	}
 
-	DBG(cdev, "%s enabled\n", ss->function.name);
+	if (alt == 0)
+		goto out;
+
+	/* one iso endpoint writes (sources) zeroes IN (to the host) */
+	ep = ss->iso_in_ep;
+	if (ep) {
+		result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
+		if (result)
+			goto fail2;
+		result = usb_ep_enable(ep);
+		if (result < 0)
+			goto fail2;
+		ep->driver_data = ss;
+
+		result = source_sink_start_ep(ss, true, true, speed);
+		if (result < 0) {
+fail3:
+			ep = ss->iso_in_ep;
+			if (ep) {
+				usb_ep_disable(ep);
+				ep->driver_data = NULL;
+			}
+			goto fail2;
+		}
+	}
+
+	/* one iso endpoint reads (sinks) anything OUT (from the host) */
+	ep = ss->iso_out_ep;
+	if (ep) {
+		result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
+		if (result)
+			goto fail3;
+		result = usb_ep_enable(ep);
+		if (result < 0)
+			goto fail3;
+		ep->driver_data = ss;
+
+		result = source_sink_start_ep(ss, false, true, speed);
+		if (result < 0) {
+			usb_ep_disable(ep);
+			ep->driver_data = NULL;
+			goto fail3;
+		}
+	}
+out:
+	ss->cur_alt = alt;
+
+	DBG(cdev, "%s enabled, alt intf %d\n", ss->function.name, alt);
 	return result;
 }
 
 static int sourcesink_set_alt(struct usb_function *f,
 		unsigned intf, unsigned alt)
 {
-	struct f_sourcesink	*ss = func_to_ss(f);
-	struct usb_composite_dev *cdev = f->config->cdev;
+	struct f_sourcesink		*ss = func_to_ss(f);
+	struct usb_composite_dev	*cdev = f->config->cdev;
 
-	/* we know alt is zero */
 	if (ss->in_ep->driver_data)
 		disable_source_sink(ss);
-	return enable_source_sink(cdev, ss);
+	return enable_source_sink(cdev, ss, alt);
+}
+
+static int sourcesink_get_alt(struct usb_function *f, unsigned intf)
+{
+	struct f_sourcesink		*ss = func_to_ss(f);
+
+	return ss->cur_alt;
 }
 
 static void sourcesink_disable(struct usb_function *f)
@@ -465,6 +777,7 @@ static int __init sourcesink_bind_config(struct usb_configuration *c)
 	ss->function.bind = sourcesink_bind;
 	ss->function.unbind = sourcesink_unbind;
 	ss->function.set_alt = sourcesink_set_alt;
+	ss->function.get_alt = sourcesink_get_alt;
 	ss->function.disable = sourcesink_disable;
 
 	status = usb_add_function(c, &ss->function);
@@ -536,7 +849,7 @@ unknown:
 		req->length = value;
 		value = usb_ep_queue(c->cdev->gadget->ep0, req, GFP_ATOMIC);
 		if (value < 0)
-			ERROR(c->cdev, "source/sinkc response, err %d\n",
+			ERROR(c->cdev, "source/sink response, err %d\n",
 					value);
 	}
 
@@ -545,12 +858,12 @@ unknown:
 }
 
 static struct usb_configuration sourcesink_driver = {
-	.label		= "source/sink",
-	.strings	= sourcesink_strings,
-	.setup		= sourcesink_setup,
-	.bConfigurationValue = 3,
-	.bmAttributes	= USB_CONFIG_ATT_SELFPOWER,
-	/* .iConfiguration = DYNAMIC */
+	.label			= "source/sink",
+	.strings		= sourcesink_strings,
+	.setup			= sourcesink_setup,
+	.bConfigurationValue	= 3,
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+	/* .iConfiguration	= DYNAMIC */
 };
 
 /**
@@ -567,7 +880,8 @@ int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume)
 		return id;
 	strings_sourcesink[0].id = id;
 
-	source_sink_intf.iInterface = id;
+	source_sink_intf_alt0.iInterface = id;
+	source_sink_intf_alt1.iInterface = id;
 	sourcesink_driver.iConfiguration = id;
 
 	/* support autoresume for remote wakeup testing */
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 877a2c46672b..51881f3bd07a 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -71,9 +71,6 @@ static struct usb_endpoint_descriptor qe_ep0_desc = {
 	.wMaxPacketSize =	USB_MAX_CTRL_PAYLOAD,
 };
 
-/* it is initialized in probe()  */
-static struct qe_udc *udc_controller;
-
 /********************************************************************
  *      Internal Used Function Start
 ********************************************************************/
@@ -188,8 +185,8 @@ static int qe_ep0_stall(struct qe_udc *udc)
 {
 	qe_eptx_stall_change(&udc->eps[0], 1);
 	qe_eprx_stall_change(&udc->eps[0], 1);
-	udc_controller->ep0_state = WAIT_FOR_SETUP;
-	udc_controller->ep0_dir = 0;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = 0;
 	return 0;
 }
 
@@ -450,13 +447,13 @@ static int qe_ep_rxbd_update(struct qe_ep *ep)
 
 	ep->rxbuf_d = virt_to_phys((void *)ep->rxbuffer);
 	if (ep->rxbuf_d == DMA_ADDR_INVALID) {
-		ep->rxbuf_d = dma_map_single(udc_controller->gadget.dev.parent,
+		ep->rxbuf_d = dma_map_single(ep->udc->gadget.dev.parent,
 					ep->rxbuffer,
 					size,
 					DMA_FROM_DEVICE);
 		ep->rxbufmap = 1;
 	} else {
-		dma_sync_single_for_device(udc_controller->gadget.dev.parent,
+		dma_sync_single_for_device(ep->udc->gadget.dev.parent,
 					ep->rxbuf_d, size,
 					DMA_FROM_DEVICE);
 		ep->rxbufmap = 0;
@@ -489,10 +486,10 @@ static int qe_ep_register_init(struct qe_udc *udc, unsigned char pipe_num)
 	epparam = udc->ep_param[pipe_num];
 
 	usep = 0;
-	logepnum = (ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+	logepnum = (ep->ep.desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 	usep |= (logepnum << USB_EPNUM_SHIFT);
 
-	switch (ep->desc->bmAttributes & 0x03) {
+	switch (ep->ep.desc->bmAttributes & 0x03) {
 	case USB_ENDPOINT_XFER_BULK:
 		usep |= USB_TRANS_BULK;
 		break;
@@ -644,7 +641,7 @@ static int qe_ep_init(struct qe_udc *udc,
 	/* initialize ep structure */
 	ep->ep.maxpacket = max;
 	ep->tm = (u8)(desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
-	ep->desc = desc;
+	ep->ep.desc = desc;
 	ep->stopped = 0;
 	ep->init = 1;
 
@@ -698,14 +695,14 @@ en_done:
 	return -ENODEV;
 }
 
-static inline void qe_usb_enable(void)
+static inline void qe_usb_enable(struct qe_udc *udc)
 {
-	setbits8(&udc_controller->usb_regs->usb_usmod, USB_MODE_EN);
+	setbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN);
 }
 
-static inline void qe_usb_disable(void)
+static inline void qe_usb_disable(struct qe_udc *udc)
 {
-	clrbits8(&udc_controller->usb_regs->usb_usmod, USB_MODE_EN);
+	clrbits8(&udc->usb_regs->usb_usmod, USB_MODE_EN);
 }
 
 /*----------------------------------------------------------------------------*
@@ -1599,7 +1596,7 @@ static int qe_ep_enable(struct usb_ep *_ep,
 	ep = container_of(_ep, struct qe_ep, ep);
 
 	/* catch various bogus parameters */
-	if (!_ep || !desc || ep->desc || _ep->name == ep_name[0] ||
+	if (!_ep || !desc || ep->ep.desc || _ep->name == ep_name[0] ||
 			(desc->bDescriptorType != USB_DT_ENDPOINT))
 		return -EINVAL;
 
@@ -1629,7 +1626,7 @@ static int qe_ep_disable(struct usb_ep *_ep)
 	ep = container_of(_ep, struct qe_ep, ep);
 	udc = ep->udc;
 
-	if (!_ep || !ep->desc) {
+	if (!_ep || !ep->ep.desc) {
 		dev_dbg(udc->dev, "%s not enabled\n", _ep ? ep->ep.name : NULL);
 		return -EINVAL;
 	}
@@ -1637,7 +1634,6 @@ static int qe_ep_disable(struct usb_ep *_ep)
 	spin_lock_irqsave(&udc->lock, flags);
 	/* Nuke all pending requests (does flush) */
 	nuke(ep, -ESHUTDOWN);
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 	ep->stopped = 1;
 	ep->tx_req = NULL;
@@ -1656,13 +1652,13 @@ static int qe_ep_disable(struct usb_ep *_ep)
 	if (ep->dir != USB_DIR_IN) {
 		kfree(ep->rxframe);
 		if (ep->rxbufmap) {
-			dma_unmap_single(udc_controller->gadget.dev.parent,
+			dma_unmap_single(udc->gadget.dev.parent,
 					ep->rxbuf_d, size,
 					DMA_FROM_DEVICE);
 			ep->rxbuf_d = DMA_ADDR_INVALID;
 		} else {
 			dma_sync_single_for_cpu(
-					udc_controller->gadget.dev.parent,
+					udc->gadget.dev.parent,
 					ep->rxbuf_d, size,
 					DMA_FROM_DEVICE);
 		}
@@ -1715,7 +1711,7 @@ static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req)
 		dev_dbg(udc->dev, "bad params\n");
 		return -EINVAL;
 	}
-	if (!_ep || (!ep->desc && ep_index(ep))) {
+	if (!_ep || (!ep->ep.desc && ep_index(ep))) {
 		dev_dbg(udc->dev, "bad ep\n");
 		return -EINVAL;
 	}
@@ -1826,7 +1822,7 @@ static int qe_ep_set_halt(struct usb_ep *_ep, int value)
 	struct qe_udc *udc;
 
 	ep = container_of(_ep, struct qe_ep, ep);
-	if (!_ep || !ep->desc) {
+	if (!_ep || !ep->ep.desc) {
 		status = -EINVAL;
 		goto out;
 	}
@@ -1880,9 +1876,10 @@ static struct usb_ep_ops qe_ep_ops = {
 /* Get the current frame number */
 static int qe_get_frame(struct usb_gadget *gadget)
 {
+	struct qe_udc *udc = container_of(gadget, struct qe_udc, gadget);
 	u16 tmp;
 
-	tmp = in_be16(&udc_controller->usb_param->frame_n);
+	tmp = in_be16(&udc->usb_param->frame_n);
 	if (tmp & 0x8000)
 		tmp = tmp & 0x07ff;
 	else
@@ -1891,57 +1888,16 @@ static int qe_get_frame(struct usb_gadget *gadget)
 	return (int)tmp;
 }
 
-/* Tries to wake up the host connected to this gadget
- *
- * Return : 0-success
- * Negative-this feature not enabled by host or not supported by device hw
- */
-static int qe_wakeup(struct usb_gadget *gadget)
-{
-	return -ENOTSUPP;
-}
-
-/* Notify controller that VBUS is powered, Called by whatever
-   detects VBUS sessions */
-static int qe_vbus_session(struct usb_gadget *gadget, int is_active)
-{
-	return -ENOTSUPP;
-}
-
-/* constrain controller's VBUS power usage
- * This call is used by gadget drivers during SET_CONFIGURATION calls,
- * reporting how much power the device may consume.  For example, this
- * could affect how quickly batteries are recharged.
- *
- * Returns zero on success, else negative errno.
- */
-static int qe_vbus_draw(struct usb_gadget *gadget, unsigned mA)
-{
-	return -ENOTSUPP;
-}
-
-/* Change Data+ pullup status
- * this func is used by usb_gadget_connect/disconnect
- */
-static int qe_pullup(struct usb_gadget *gadget, int is_on)
-{
-	return -ENOTSUPP;
-}
-
-static int fsl_qe_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int fsl_qe_stop(struct usb_gadget_driver *driver);
+static int fsl_qe_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
+static int fsl_qe_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
 
 /* defined in usb_gadget.h */
 static struct usb_gadget_ops qe_gadget_ops = {
 	.get_frame = qe_get_frame,
-	.wakeup = qe_wakeup,
-/*	.set_selfpowered = qe_set_selfpowered,*/ /* always selfpowered */
-	.vbus_session = qe_vbus_session,
-	.vbus_draw = qe_vbus_draw,
-	.pullup = qe_pullup,
-	.start = fsl_qe_start,
-	.stop = fsl_qe_stop,
+	.udc_start = fsl_qe_start,
+	.udc_stop = fsl_qe_stop,
 };
 
 /*-------------------------------------------------------------------------
@@ -2015,7 +1971,7 @@ static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value,
 		u16 usep;
 
 		/* stall if endpoint doesn't exist */
-		if (!target_ep->desc)
+		if (!target_ep->ep.desc)
 			goto stall;
 
 		usep = in_be16(&udc->usb_regs->usb_usep[pipe]);
@@ -2190,7 +2146,7 @@ static int reset_irq(struct qe_udc *udc)
 	if (udc->usb_state == USB_STATE_DEFAULT)
 		return 0;
 
-	qe_usb_disable();
+	qe_usb_disable(udc);
 	out_8(&udc->usb_regs->usb_usadr, 0);
 
 	for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
@@ -2202,7 +2158,7 @@ static int reset_irq(struct qe_udc *udc)
 	udc->usb_state = USB_STATE_DEFAULT;
 	udc->ep0_state = WAIT_FOR_SETUP;
 	udc->ep0_dir = USB_DIR_OUT;
-	qe_usb_enable();
+	qe_usb_enable(udc);
 	return 0;
 }
 
@@ -2327,92 +2283,65 @@ static irqreturn_t qe_udc_irq(int irq, void *_udc)
 /*-------------------------------------------------------------------------
 	Gadget driver probe and unregister.
  --------------------------------------------------------------------------*/
-static int fsl_qe_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int fsl_qe_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	int retval;
-	unsigned long flags = 0;
-
-	/* standard operations */
-	if (!udc_controller)
-		return -ENODEV;
-
-	if (!driver || driver->max_speed < USB_SPEED_FULL
-			|| !bind || !driver->disconnect || !driver->setup)
-		return -EINVAL;
-
-	if (udc_controller->driver)
-		return -EBUSY;
+	struct qe_udc *udc;
+	unsigned long flags;
 
+	udc = container_of(gadget, struct qe_udc, gadget);
 	/* lock is needed but whether should use this lock or another */
-	spin_lock_irqsave(&udc_controller->lock, flags);
+	spin_lock_irqsave(&udc->lock, flags);
 
 	driver->driver.bus = NULL;
 	/* hook up the driver */
-	udc_controller->driver = driver;
-	udc_controller->gadget.dev.driver = &driver->driver;
-	udc_controller->gadget.speed = driver->max_speed;
-	spin_unlock_irqrestore(&udc_controller->lock, flags);
-
-	retval = bind(&udc_controller->gadget);
-	if (retval) {
-		dev_err(udc_controller->dev, "bind to %s --> %d",
-				driver->driver.name, retval);
-		udc_controller->gadget.dev.driver = NULL;
-		udc_controller->driver = NULL;
-		return retval;
-	}
+	udc->driver = driver;
+	udc->gadget.dev.driver = &driver->driver;
+	udc->gadget.speed = driver->max_speed;
 
 	/* Enable IRQ reg and Set usbcmd reg EN bit */
-	qe_usb_enable();
-
-	out_be16(&udc_controller->usb_regs->usb_usber, 0xffff);
-	out_be16(&udc_controller->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE);
-	udc_controller->usb_state = USB_STATE_ATTACHED;
-	udc_controller->ep0_state = WAIT_FOR_SETUP;
-	udc_controller->ep0_dir = USB_DIR_OUT;
-	dev_info(udc_controller->dev, "%s bind to driver %s \n",
-		udc_controller->gadget.name, driver->driver.name);
+	qe_usb_enable(udc);
+
+	out_be16(&udc->usb_regs->usb_usber, 0xffff);
+	out_be16(&udc->usb_regs->usb_usbmr, USB_E_DEFAULT_DEVICE);
+	udc->usb_state = USB_STATE_ATTACHED;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = USB_DIR_OUT;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	dev_info(udc->dev, "%s bind to driver %s\n", udc->gadget.name,
+			driver->driver.name);
 	return 0;
 }
 
-static int fsl_qe_stop(struct usb_gadget_driver *driver)
+static int fsl_qe_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
+	struct qe_udc *udc;
 	struct qe_ep *loop_ep;
 	unsigned long flags;
 
-	if (!udc_controller)
-		return -ENODEV;
-
-	if (!driver || driver != udc_controller->driver)
-		return -EINVAL;
-
+	udc = container_of(gadget, struct qe_udc, gadget);
 	/* stop usb controller, disable intr */
-	qe_usb_disable();
+	qe_usb_disable(udc);
 
 	/* in fact, no needed */
-	udc_controller->usb_state = USB_STATE_ATTACHED;
-	udc_controller->ep0_state = WAIT_FOR_SETUP;
-	udc_controller->ep0_dir = 0;
+	udc->usb_state = USB_STATE_ATTACHED;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = 0;
 
 	/* stand operation */
-	spin_lock_irqsave(&udc_controller->lock, flags);
-	udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
-	nuke(&udc_controller->eps[0], -ESHUTDOWN);
-	list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list,
-				ep.ep_list)
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	nuke(&udc->eps[0], -ESHUTDOWN);
+	list_for_each_entry(loop_ep, &udc->gadget.ep_list, ep.ep_list)
 		nuke(loop_ep, -ESHUTDOWN);
-	spin_unlock_irqrestore(&udc_controller->lock, flags);
-
-	/* report disconnect; the controller is already quiesced */
-	driver->disconnect(&udc_controller->gadget);
+	spin_unlock_irqrestore(&udc->lock, flags);
 
-	/* unbind gadget and unhook driver. */
-	driver->unbind(&udc_controller->gadget);
-	udc_controller->gadget.dev.driver = NULL;
-	udc_controller->driver = NULL;
+	udc->gadget.dev.driver = NULL;
+	udc->driver = NULL;
 
-	dev_info(udc_controller->dev, "unregistered gadget driver '%s'\r\n",
+	dev_info(udc->dev, "unregistered gadget driver '%s'\r\n",
 			driver->driver.name);
 	return 0;
 }
@@ -2502,7 +2431,7 @@ static int __devinit qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
 	ep->ep.ops = &qe_ep_ops;
 	ep->stopped = 1;
 	ep->ep.maxpacket = (unsigned short) ~0;
-	ep->desc = NULL;
+	ep->ep.desc = NULL;
 	ep->dir = 0xff;
 	ep->epnum = (u8)pipe_num;
 	ep->sent = 0;
@@ -2531,21 +2460,22 @@ static int __devinit qe_ep_config(struct qe_udc *udc, unsigned char pipe_num)
  *----------------------------------------------------------------------*/
 static void qe_udc_release(struct device *dev)
 {
-	int i = 0;
+	struct qe_udc *udc = container_of(dev, struct qe_udc, gadget.dev);
+	int i;
 
-	complete(udc_controller->done);
-	cpm_muram_free(cpm_muram_offset(udc_controller->ep_param[0]));
+	complete(udc->done);
+	cpm_muram_free(cpm_muram_offset(udc->ep_param[0]));
 	for (i = 0; i < USB_MAX_ENDPOINTS; i++)
-		udc_controller->ep_param[i] = NULL;
+		udc->ep_param[i] = NULL;
 
-	kfree(udc_controller);
-	udc_controller = NULL;
+	kfree(udc);
 }
 
 /* Driver probe functions */
 static const struct of_device_id qe_udc_match[];
 static int __devinit qe_udc_probe(struct platform_device *ofdev)
 {
+	struct qe_udc *udc;
 	const struct of_device_id *match;
 	struct device_node *np = ofdev->dev.of_node;
 	struct qe_ep *ep;
@@ -2562,44 +2492,44 @@ static int __devinit qe_udc_probe(struct platform_device *ofdev)
 		return -ENODEV;
 
 	/* Initialize the udc structure including QH member and other member */
-	udc_controller = qe_udc_config(ofdev);
-	if (!udc_controller) {
+	udc = qe_udc_config(ofdev);
+	if (!udc) {
 		dev_err(&ofdev->dev, "failed to initialize\n");
 		return -ENOMEM;
 	}
 
-	udc_controller->soc_type = (unsigned long)match->data;
-	udc_controller->usb_regs = of_iomap(np, 0);
-	if (!udc_controller->usb_regs) {
+	udc->soc_type = (unsigned long)match->data;
+	udc->usb_regs = of_iomap(np, 0);
+	if (!udc->usb_regs) {
 		ret = -ENOMEM;
 		goto err1;
 	}
 
 	/* initialize usb hw reg except for regs for EP,
 	 * leave usbintr reg untouched*/
-	qe_udc_reg_init(udc_controller);
+	qe_udc_reg_init(udc);
 
 	/* here comes the stand operations for probe
 	 * set the qe_udc->gadget.xxx */
-	udc_controller->gadget.ops = &qe_gadget_ops;
+	udc->gadget.ops = &qe_gadget_ops;
 
 	/* gadget.ep0 is a pointer */
-	udc_controller->gadget.ep0 = &udc_controller->eps[0].ep;
+	udc->gadget.ep0 = &udc->eps[0].ep;
 
-	INIT_LIST_HEAD(&udc_controller->gadget.ep_list);
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
 
 	/* modify in register gadget process */
-	udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
 
 	/* name: Identifies the controller hardware type. */
-	udc_controller->gadget.name = driver_name;
+	udc->gadget.name = driver_name;
 
-	device_initialize(&udc_controller->gadget.dev);
+	device_initialize(&udc->gadget.dev);
 
-	dev_set_name(&udc_controller->gadget.dev, "gadget");
+	dev_set_name(&udc->gadget.dev, "gadget");
 
-	udc_controller->gadget.dev.release = qe_udc_release;
-	udc_controller->gadget.dev.parent = &ofdev->dev;
+	udc->gadget.dev.release = qe_udc_release;
+	udc->gadget.dev.parent = &ofdev->dev;
 
 	/* initialize qe_ep struct */
 	for (i = 0; i < USB_MAX_ENDPOINTS ; i++) {
@@ -2608,104 +2538,104 @@ static int __devinit qe_udc_probe(struct platform_device *ofdev)
 
 		/* setup the qe_ep struct and link ep.ep.list
 		 * into gadget.ep_list */
-		qe_ep_config(udc_controller, (unsigned char)i);
+		qe_ep_config(udc, (unsigned char)i);
 	}
 
 	/* ep0 initialization in here */
-	ret = qe_ep_init(udc_controller, 0, &qe_ep0_desc);
+	ret = qe_ep_init(udc, 0, &qe_ep0_desc);
 	if (ret)
 		goto err2;
 
 	/* create a buf for ZLP send, need to remain zeroed */
-	udc_controller->nullbuf = kzalloc(256, GFP_KERNEL);
-	if (udc_controller->nullbuf == NULL) {
-		dev_err(udc_controller->dev, "cannot alloc nullbuf\n");
+	udc->nullbuf = kzalloc(256, GFP_KERNEL);
+	if (udc->nullbuf == NULL) {
+		dev_err(udc->dev, "cannot alloc nullbuf\n");
 		ret = -ENOMEM;
 		goto err3;
 	}
 
 	/* buffer for data of get_status request */
-	udc_controller->statusbuf = kzalloc(2, GFP_KERNEL);
-	if (udc_controller->statusbuf == NULL) {
+	udc->statusbuf = kzalloc(2, GFP_KERNEL);
+	if (udc->statusbuf == NULL) {
 		ret = -ENOMEM;
 		goto err4;
 	}
 
-	udc_controller->nullp = virt_to_phys((void *)udc_controller->nullbuf);
-	if (udc_controller->nullp == DMA_ADDR_INVALID) {
-		udc_controller->nullp = dma_map_single(
-					udc_controller->gadget.dev.parent,
-					udc_controller->nullbuf,
+	udc->nullp = virt_to_phys((void *)udc->nullbuf);
+	if (udc->nullp == DMA_ADDR_INVALID) {
+		udc->nullp = dma_map_single(
+					udc->gadget.dev.parent,
+					udc->nullbuf,
 					256,
 					DMA_TO_DEVICE);
-		udc_controller->nullmap = 1;
+		udc->nullmap = 1;
 	} else {
-		dma_sync_single_for_device(udc_controller->gadget.dev.parent,
-					udc_controller->nullp, 256,
+		dma_sync_single_for_device(udc->gadget.dev.parent,
+					udc->nullp, 256,
 					DMA_TO_DEVICE);
 	}
 
-	tasklet_init(&udc_controller->rx_tasklet, ep_rx_tasklet,
-			(unsigned long)udc_controller);
+	tasklet_init(&udc->rx_tasklet, ep_rx_tasklet,
+			(unsigned long)udc);
 	/* request irq and disable DR  */
-	udc_controller->usb_irq = irq_of_parse_and_map(np, 0);
-	if (!udc_controller->usb_irq) {
+	udc->usb_irq = irq_of_parse_and_map(np, 0);
+	if (!udc->usb_irq) {
 		ret = -EINVAL;
 		goto err_noirq;
 	}
 
-	ret = request_irq(udc_controller->usb_irq, qe_udc_irq, 0,
-				driver_name, udc_controller);
+	ret = request_irq(udc->usb_irq, qe_udc_irq, 0,
+				driver_name, udc);
 	if (ret) {
-		dev_err(udc_controller->dev, "cannot request irq %d err %d \n",
-			udc_controller->usb_irq, ret);
+		dev_err(udc->dev, "cannot request irq %d err %d\n",
+				udc->usb_irq, ret);
 		goto err5;
 	}
 
-	ret = device_add(&udc_controller->gadget.dev);
+	ret = device_add(&udc->gadget.dev);
 	if (ret)
 		goto err6;
 
-	ret = usb_add_gadget_udc(&ofdev->dev, &udc_controller->gadget);
+	ret = usb_add_gadget_udc(&ofdev->dev, &udc->gadget);
 	if (ret)
 		goto err7;
 
-	dev_info(udc_controller->dev,
+	dev_set_drvdata(&ofdev->dev, udc);
+	dev_info(udc->dev,
 			"%s USB controller initialized as device\n",
-			(udc_controller->soc_type == PORT_QE) ? "QE" : "CPM");
+			(udc->soc_type == PORT_QE) ? "QE" : "CPM");
 	return 0;
 
 err7:
-	device_unregister(&udc_controller->gadget.dev);
+	device_unregister(&udc->gadget.dev);
 err6:
-	free_irq(udc_controller->usb_irq, udc_controller);
+	free_irq(udc->usb_irq, udc);
 err5:
-	irq_dispose_mapping(udc_controller->usb_irq);
+	irq_dispose_mapping(udc->usb_irq);
 err_noirq:
-	if (udc_controller->nullmap) {
-		dma_unmap_single(udc_controller->gadget.dev.parent,
-			udc_controller->nullp, 256,
+	if (udc->nullmap) {
+		dma_unmap_single(udc->gadget.dev.parent,
+			udc->nullp, 256,
 				DMA_TO_DEVICE);
-			udc_controller->nullp = DMA_ADDR_INVALID;
+			udc->nullp = DMA_ADDR_INVALID;
 	} else {
-		dma_sync_single_for_cpu(udc_controller->gadget.dev.parent,
-			udc_controller->nullp, 256,
+		dma_sync_single_for_cpu(udc->gadget.dev.parent,
+			udc->nullp, 256,
 				DMA_TO_DEVICE);
 	}
-	kfree(udc_controller->statusbuf);
+	kfree(udc->statusbuf);
 err4:
-	kfree(udc_controller->nullbuf);
+	kfree(udc->nullbuf);
 err3:
-	ep = &udc_controller->eps[0];
+	ep = &udc->eps[0];
 	cpm_muram_free(cpm_muram_offset(ep->rxbase));
 	kfree(ep->rxframe);
 	kfree(ep->rxbuffer);
 	kfree(ep->txframe);
 err2:
-	iounmap(udc_controller->usb_regs);
+	iounmap(udc->usb_regs);
 err1:
-	kfree(udc_controller);
-	udc_controller = NULL;
+	kfree(udc);
 	return ret;
 }
 
@@ -2723,44 +2653,41 @@ static int qe_udc_resume(struct platform_device *dev)
 
 static int __devexit qe_udc_remove(struct platform_device *ofdev)
 {
+	struct qe_udc *udc = dev_get_drvdata(&ofdev->dev);
 	struct qe_ep *ep;
 	unsigned int size;
-
 	DECLARE_COMPLETION(done);
 
-	if (!udc_controller)
-		return -ENODEV;
-
-	usb_del_gadget_udc(&udc_controller->gadget);
+	usb_del_gadget_udc(&udc->gadget);
 
-	udc_controller->done = &done;
-	tasklet_disable(&udc_controller->rx_tasklet);
+	udc->done = &done;
+	tasklet_disable(&udc->rx_tasklet);
 
-	if (udc_controller->nullmap) {
-		dma_unmap_single(udc_controller->gadget.dev.parent,
-			udc_controller->nullp, 256,
+	if (udc->nullmap) {
+		dma_unmap_single(udc->gadget.dev.parent,
+			udc->nullp, 256,
 				DMA_TO_DEVICE);
-			udc_controller->nullp = DMA_ADDR_INVALID;
+			udc->nullp = DMA_ADDR_INVALID;
 	} else {
-		dma_sync_single_for_cpu(udc_controller->gadget.dev.parent,
-			udc_controller->nullp, 256,
+		dma_sync_single_for_cpu(udc->gadget.dev.parent,
+			udc->nullp, 256,
 				DMA_TO_DEVICE);
 	}
-	kfree(udc_controller->statusbuf);
-	kfree(udc_controller->nullbuf);
+	kfree(udc->statusbuf);
+	kfree(udc->nullbuf);
 
-	ep = &udc_controller->eps[0];
+	ep = &udc->eps[0];
 	cpm_muram_free(cpm_muram_offset(ep->rxbase));
 	size = (ep->ep.maxpacket + USB_CRC_SIZE + 2) * (USB_BDRING_LEN + 1);
 
 	kfree(ep->rxframe);
 	if (ep->rxbufmap) {
-		dma_unmap_single(udc_controller->gadget.dev.parent,
+		dma_unmap_single(udc->gadget.dev.parent,
 				ep->rxbuf_d, size,
 				DMA_FROM_DEVICE);
 		ep->rxbuf_d = DMA_ADDR_INVALID;
 	} else {
-		dma_sync_single_for_cpu(udc_controller->gadget.dev.parent,
+		dma_sync_single_for_cpu(udc->gadget.dev.parent,
 				ep->rxbuf_d, size,
 				DMA_FROM_DEVICE);
 	}
@@ -2768,14 +2695,14 @@ static int __devexit qe_udc_remove(struct platform_device *ofdev)
 	kfree(ep->rxbuffer);
 	kfree(ep->txframe);
 
-	free_irq(udc_controller->usb_irq, udc_controller);
-	irq_dispose_mapping(udc_controller->usb_irq);
+	free_irq(udc->usb_irq, udc);
+	irq_dispose_mapping(udc->usb_irq);
 
-	tasklet_kill(&udc_controller->rx_tasklet);
+	tasklet_kill(&udc->rx_tasklet);
 
-	iounmap(udc_controller->usb_regs);
+	iounmap(udc->usb_regs);
 
-	device_unregister(&udc_controller->gadget.dev);
+	device_unregister(&udc->gadget.dev);
 	/* wait for release() of gadget.dev to free udc */
 	wait_for_completion(&done);
 
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index 1da5fb03d218..4c07ca9cebf3 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -266,7 +266,6 @@ struct qe_ep {
 	struct usb_ep ep;
 	struct list_head queue;
 	struct qe_udc *udc;
-	const struct usb_endpoint_descriptor *desc;
 	struct usb_gadget *gadget;
 
 	u8 state;
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 55abfb6bd612..28316858208b 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2004-2007,2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007,2011-2012 Freescale Semiconductor, Inc.
  * All rights reserved.
  *
  * Author: Li Yang <leoli@freescale.com>
@@ -58,9 +58,8 @@ static const char driver_name[] = "fsl-usb2-udc";
 static const char driver_desc[] = DRIVER_DESC;
 
 static struct usb_dr_device *dr_regs;
-#ifndef CONFIG_ARCH_MXC
+
 static struct usb_sys_interface *usb_sys_regs;
-#endif
 
 /* it is initialized in probe()  */
 static struct fsl_udc *udc_controller = NULL;
@@ -244,10 +243,9 @@ static int dr_controller_setup(struct fsl_udc *udc)
 {
 	unsigned int tmp, portctrl, ep_num;
 	unsigned int max_no_of_ep;
-#ifndef CONFIG_ARCH_MXC
 	unsigned int ctrl;
-#endif
 	unsigned long timeout;
+
 #define FSL_UDC_RESET_TIMEOUT 1000
 
 	/* Config PHY interface */
@@ -255,12 +253,32 @@ static int dr_controller_setup(struct fsl_udc *udc)
 	portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
 	switch (udc->phy_mode) {
 	case FSL_USB2_PHY_ULPI:
+		if (udc->pdata->have_sysif_regs) {
+			if (udc->pdata->controller_ver) {
+				/* controller version 1.6 or above */
+				ctrl = __raw_readl(&usb_sys_regs->control);
+				ctrl &= ~USB_CTRL_UTMI_PHY_EN;
+				ctrl |= USB_CTRL_USB_EN;
+				__raw_writel(ctrl, &usb_sys_regs->control);
+			}
+		}
 		portctrl |= PORTSCX_PTS_ULPI;
 		break;
 	case FSL_USB2_PHY_UTMI_WIDE:
 		portctrl |= PORTSCX_PTW_16BIT;
 		/* fall through */
 	case FSL_USB2_PHY_UTMI:
+		if (udc->pdata->have_sysif_regs) {
+			if (udc->pdata->controller_ver) {
+				/* controller version 1.6 or above */
+				ctrl = __raw_readl(&usb_sys_regs->control);
+				ctrl |= (USB_CTRL_UTMI_PHY_EN |
+					USB_CTRL_USB_EN);
+				__raw_writel(ctrl, &usb_sys_regs->control);
+				mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI
+					PHY CLK to become stable - 10ms*/
+			}
+		}
 		portctrl |= PORTSCX_PTS_UTMI;
 		break;
 	case FSL_USB2_PHY_SERIAL:
@@ -549,7 +567,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 	ep = container_of(_ep, struct fsl_ep, ep);
 
 	/* catch various bogus parameters */
-	if (!_ep || !desc || ep->desc
+	if (!_ep || !desc || ep->ep.desc
 			|| (desc->bDescriptorType != USB_DT_ENDPOINT))
 		return -EINVAL;
 
@@ -590,7 +608,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 
 	spin_lock_irqsave(&udc->lock, flags);
 	ep->ep.maxpacket = max;
-	ep->desc = desc;
+	ep->ep.desc = desc;
 	ep->stopped = 0;
 
 	/* Controller related setup */
@@ -614,7 +632,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 	retval = 0;
 
 	VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name,
-			ep->desc->bEndpointAddress & 0x0f,
+			ep->ep.desc->bEndpointAddress & 0x0f,
 			(desc->bEndpointAddress & USB_DIR_IN)
 				? "in" : "out", max);
 en_done:
@@ -634,7 +652,7 @@ static int fsl_ep_disable(struct usb_ep *_ep)
 	int ep_num;
 
 	ep = container_of(_ep, struct fsl_ep, ep);
-	if (!_ep || !ep->desc) {
+	if (!_ep || !ep->ep.desc) {
 		VDBG("%s not enabled", _ep ? ep->ep.name : NULL);
 		return -EINVAL;
 	}
@@ -657,7 +675,6 @@ static int fsl_ep_disable(struct usb_ep *_ep)
 	/* nuke all pending requests (does flush) */
 	nuke(ep, -ESHUTDOWN);
 
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 	ep->stopped = 1;
 	spin_unlock_irqrestore(&udc->lock, flags);
@@ -736,6 +753,8 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
 		lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
 		lastreq->tail->next_td_ptr =
 			cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
+		/* Ensure dTD's next dtd pointer to be updated */
+		wmb();
 		/* Read prime bit, if 1 goto done */
 		if (fsl_readl(&dr_regs->endpointprime) & bitmask)
 			return;
@@ -874,11 +893,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		VDBG("%s, bad params", __func__);
 		return -EINVAL;
 	}
-	if (unlikely(!_ep || !ep->desc)) {
+	if (unlikely(!_ep || !ep->ep.desc)) {
 		VDBG("%s, bad ep", __func__);
 		return -EINVAL;
 	}
-	if (usb_endpoint_xfer_isoc(ep->desc)) {
+	if (usb_endpoint_xfer_isoc(ep->ep.desc)) {
 		if (req->req.length > ep->ep.maxpacket)
 			return -EMSGSIZE;
 	}
@@ -1017,12 +1036,12 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
 
 	ep = container_of(_ep, struct fsl_ep, ep);
 	udc = ep->udc;
-	if (!_ep || !ep->desc) {
+	if (!_ep || !ep->ep.desc) {
 		status = -EINVAL;
 		goto out;
 	}
 
-	if (usb_endpoint_xfer_isoc(ep->desc)) {
+	if (usb_endpoint_xfer_isoc(ep->ep.desc)) {
 		status = -EOPNOTSUPP;
 		goto out;
 	}
@@ -1061,7 +1080,7 @@ static int fsl_ep_fifo_status(struct usb_ep *_ep)
 	struct ep_queue_head *qh;
 
 	ep = container_of(_ep, struct fsl_ep, ep);
-	if (!_ep || (!ep->desc && ep_index(ep) != 0))
+	if (!_ep || (!ep->ep.desc && ep_index(ep) != 0))
 		return -ENODEV;
 
 	udc = (struct fsl_udc *)ep->udc;
@@ -1094,7 +1113,7 @@ static void fsl_ep_fifo_flush(struct usb_ep *_ep)
 		return;
 	} else {
 		ep = container_of(_ep, struct fsl_ep, ep);
-		if (!ep->desc)
+		if (!ep->ep.desc)
 			return;
 	}
 	ep_num = ep_index(ep);
@@ -1349,7 +1368,7 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
 		target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index));
 
 		/* stall if endpoint doesn't exist */
-		if (!target_ep->desc)
+		if (!target_ep->ep.desc)
 			goto stall;
 		tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep))
 				<< USB_ENDPOINT_HALT;
@@ -2259,7 +2278,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 	}
 	/* other gadget->eplist ep */
 	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
-		if (ep->desc) {
+		if (ep->ep.desc) {
 			t = scnprintf(next, size,
 					"\nFor %s Maxpkt is 0x%x "
 					"index is 0x%x\n",
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index e651469fd39b..5cd7b7e7ddb4 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -1,4 +1,12 @@
 /*
+ * Copyright (C) 2004,2012 Freescale Semiconductor, Inc
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
  * Freescale USB device/endpoint management registers
  */
 #ifndef __FSL_USB2_UDC_H
@@ -348,6 +356,9 @@ struct usb_sys_interface {
 /* control Register Bit Masks */
 #define  USB_CTRL_IOENB                       0x00000004
 #define  USB_CTRL_ULPI_INT0EN                 0x00000001
+#define USB_CTRL_UTMI_PHY_EN		      0x00000200
+#define USB_CTRL_USB_EN			      0x00000004
+#define USB_CTRL_ULPI_PHY_CLK_SEL	      0x00000400
 
 /* Endpoint Queue Head data struct
  * Rem: all the variables of qh are LittleEndian Mode
@@ -450,7 +461,6 @@ struct fsl_ep {
 	struct list_head queue;
 	struct fsl_udc *udc;
 	struct ep_queue_head *qh;
-	const struct usb_endpoint_descriptor *desc;
 	struct usb_gadget *gadget;
 
 	char name[14];
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index 5831cb4a0b35..cdd94540e1cd 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -203,7 +203,7 @@ static int config_ep(struct fusb300_ep *ep,
 	struct fusb300 *fusb300 = ep->fusb300;
 	struct fusb300_ep_info info;
 
-	ep->desc = desc;
+	ep->ep.desc = desc;
 
 	info.interval = 0;
 	info.addrofs = 0;
@@ -443,7 +443,7 @@ static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req,
 	req->req.actual = 0;
 	req->req.status = -EINPROGRESS;
 
-	if (ep->desc == NULL) /* ep0 */
+	if (ep->ep.desc == NULL) /* ep0 */
 		ep0_queue(ep, req);
 	else if (request && !ep->stall)
 		enable_fifo_int(ep);
diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h
index 92745bd03064..542cd83cc806 100644
--- a/drivers/usb/gadget/fusb300_udc.h
+++ b/drivers/usb/gadget/fusb300_udc.h
@@ -650,7 +650,6 @@ struct fusb300_ep {
 
 	unsigned char		epnum;
 	unsigned char		type;
-	const struct usb_endpoint_descriptor	*desc;
 };
 
 struct fusb300 {
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index a85eaf40b948..d3ace9002a6a 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -67,6 +67,15 @@ MODULE_LICENSE("GPL");
 #define GFS_VENDOR_ID	0x1d6b	/* Linux Foundation */
 #define GFS_PRODUCT_ID	0x0105	/* FunctionFS Gadget */
 
+#define GFS_MAX_DEVS	10
+
+struct gfs_ffs_obj {
+	const char *name;
+	bool mounted;
+	bool desc_ready;
+	struct ffs_data *ffs_data;
+};
+
 static struct usb_device_descriptor gfs_dev_desc = {
 	.bLength		= sizeof gfs_dev_desc,
 	.bDescriptorType	= USB_DT_DEVICE,
@@ -78,12 +87,17 @@ static struct usb_device_descriptor gfs_dev_desc = {
 	.idProduct		= cpu_to_le16(GFS_PRODUCT_ID),
 };
 
+static char *func_names[GFS_MAX_DEVS];
+static unsigned int func_num;
+
 module_param_named(bDeviceClass,    gfs_dev_desc.bDeviceClass,    byte,   0644);
 MODULE_PARM_DESC(bDeviceClass, "USB Device class");
 module_param_named(bDeviceSubClass, gfs_dev_desc.bDeviceSubClass, byte,   0644);
 MODULE_PARM_DESC(bDeviceSubClass, "USB Device subclass");
 module_param_named(bDeviceProtocol, gfs_dev_desc.bDeviceProtocol, byte,   0644);
 MODULE_PARM_DESC(bDeviceProtocol, "USB Device protocol");
+module_param_array_named(functions, func_names, charp, &func_num, 0);
+MODULE_PARM_DESC(functions, "USB Functions list");
 
 static const struct usb_descriptor_header *gfs_otg_desc[] = {
 	(const struct usb_descriptor_header *)
@@ -158,13 +172,34 @@ static struct usb_composite_driver gfs_driver = {
 	.iProduct	= DRIVER_DESC,
 };
 
-static struct ffs_data *gfs_ffs_data;
-static unsigned long gfs_registered;
+static DEFINE_MUTEX(gfs_lock);
+static unsigned int missing_funcs;
+static bool gfs_ether_setup;
+static bool gfs_registered;
+static bool gfs_single_func;
+static struct gfs_ffs_obj *ffs_tab;
 
 static int __init gfs_init(void)
 {
+	int i;
+
 	ENTER();
 
+	if (!func_num) {
+		gfs_single_func = true;
+		func_num = 1;
+	}
+
+	ffs_tab = kcalloc(func_num, sizeof *ffs_tab, GFP_KERNEL);
+	if (!ffs_tab)
+		return -ENOMEM;
+
+	if (!gfs_single_func)
+		for (i = 0; i < func_num; i++)
+			ffs_tab[i].name = func_names[i];
+
+	missing_funcs = func_num;
+
 	return functionfs_init();
 }
 module_init(gfs_init);
@@ -172,63 +207,165 @@ module_init(gfs_init);
 static void __exit gfs_exit(void)
 {
 	ENTER();
+	mutex_lock(&gfs_lock);
 
-	if (test_and_clear_bit(0, &gfs_registered))
+	if (gfs_registered)
 		usb_composite_unregister(&gfs_driver);
+	gfs_registered = false;
 
 	functionfs_cleanup();
+
+	mutex_unlock(&gfs_lock);
+	kfree(ffs_tab);
 }
 module_exit(gfs_exit);
 
+static struct gfs_ffs_obj *gfs_find_dev(const char *dev_name)
+{
+	int i;
+
+	ENTER();
+
+	if (gfs_single_func)
+		return &ffs_tab[0];
+
+	for (i = 0; i < func_num; i++)
+		if (strcmp(ffs_tab[i].name, dev_name) == 0)
+			return &ffs_tab[i];
+
+	return NULL;
+}
+
 static int functionfs_ready_callback(struct ffs_data *ffs)
 {
+	struct gfs_ffs_obj *ffs_obj;
 	int ret;
 
 	ENTER();
+	mutex_lock(&gfs_lock);
+
+	ffs_obj = ffs->private_data;
+	if (!ffs_obj) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if (WARN_ON(ffs_obj->desc_ready)) {
+		ret = -EBUSY;
+		goto done;
+	}
+	ffs_obj->desc_ready = true;
+	ffs_obj->ffs_data = ffs;
 
-	if (WARN_ON(test_and_set_bit(0, &gfs_registered)))
-		return -EBUSY;
+	if (--missing_funcs) {
+		ret = 0;
+		goto done;
+	}
+
+	if (gfs_registered) {
+		ret = -EBUSY;
+		goto done;
+	}
+	gfs_registered = true;
 
-	gfs_ffs_data = ffs;
 	ret = usb_composite_probe(&gfs_driver, gfs_bind);
 	if (unlikely(ret < 0))
-		clear_bit(0, &gfs_registered);
+		gfs_registered = false;
+
+done:
+	mutex_unlock(&gfs_lock);
 	return ret;
 }
 
 static void functionfs_closed_callback(struct ffs_data *ffs)
 {
+	struct gfs_ffs_obj *ffs_obj;
+
 	ENTER();
+	mutex_lock(&gfs_lock);
 
-	if (test_and_clear_bit(0, &gfs_registered))
+	ffs_obj = ffs->private_data;
+	if (!ffs_obj)
+		goto done;
+
+	ffs_obj->desc_ready = false;
+	missing_funcs++;
+
+	if (gfs_registered)
 		usb_composite_unregister(&gfs_driver);
+	gfs_registered = false;
+
+done:
+	mutex_unlock(&gfs_lock);
 }
 
-static int functionfs_check_dev_callback(const char *dev_name)
+static void *functionfs_acquire_dev_callback(const char *dev_name)
 {
-	return 0;
+	struct gfs_ffs_obj *ffs_dev;
+
+	ENTER();
+	mutex_lock(&gfs_lock);
+
+	ffs_dev = gfs_find_dev(dev_name);
+	if (!ffs_dev) {
+		ffs_dev = ERR_PTR(-ENODEV);
+		goto done;
+	}
+
+	if (ffs_dev->mounted) {
+		ffs_dev = ERR_PTR(-EBUSY);
+		goto done;
+	}
+	ffs_dev->mounted = true;
+
+done:
+	mutex_unlock(&gfs_lock);
+	return ffs_dev;
 }
 
+static void functionfs_release_dev_callback(struct ffs_data *ffs_data)
+{
+	struct gfs_ffs_obj *ffs_dev;
+
+	ENTER();
+	mutex_lock(&gfs_lock);
+
+	ffs_dev = ffs_data->private_data;
+	if (ffs_dev)
+		ffs_dev->mounted = false;
+
+	mutex_unlock(&gfs_lock);
+}
+
+/*
+ * It is assumed that gfs_bind is called from a context where gfs_lock is held
+ */
 static int gfs_bind(struct usb_composite_dev *cdev)
 {
 	int ret, i;
 
 	ENTER();
 
-	if (WARN_ON(!gfs_ffs_data))
+	if (missing_funcs)
 		return -ENODEV;
 
 	ret = gether_setup(cdev->gadget, gfs_hostaddr);
 	if (unlikely(ret < 0))
 		goto error_quick;
+	gfs_ether_setup = true;
 
 	ret = usb_string_ids_tab(cdev, gfs_strings);
 	if (unlikely(ret < 0))
 		goto error;
 
-	ret = functionfs_bind(gfs_ffs_data, cdev);
-	if (unlikely(ret < 0))
-		goto error;
+	for (i = func_num; --i; ) {
+		ret = functionfs_bind(ffs_tab[i].ffs_data, cdev);
+		if (unlikely(ret < 0)) {
+			while (++i < func_num)
+				functionfs_unbind(ffs_tab[i].ffs_data);
+			goto error;
+		}
+	}
 
 	for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) {
 		struct gfs_configuration *c = gfs_configurations + i;
@@ -246,16 +383,22 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 	return 0;
 
 error_unbind:
-	functionfs_unbind(gfs_ffs_data);
+	for (i = 0; i < func_num; i++)
+		functionfs_unbind(ffs_tab[i].ffs_data);
 error:
 	gether_cleanup();
 error_quick:
-	gfs_ffs_data = NULL;
+	gfs_ether_setup = false;
 	return ret;
 }
 
+/*
+ * It is assumed that gfs_unbind is called from a context where gfs_lock is held
+ */
 static int gfs_unbind(struct usb_composite_dev *cdev)
 {
+	int i;
+
 	ENTER();
 
 	/*
@@ -266,22 +409,29 @@ static int gfs_unbind(struct usb_composite_dev *cdev)
 	 * from composite on orror recovery, but what you're gonna
 	 * do...?
 	 */
-	if (gfs_ffs_data) {
+	if (gfs_ether_setup)
 		gether_cleanup();
-		functionfs_unbind(gfs_ffs_data);
-		gfs_ffs_data = NULL;
-	}
+	gfs_ether_setup = false;
+
+	for (i = func_num; --i; )
+		if (ffs_tab[i].ffs_data)
+			functionfs_unbind(ffs_tab[i].ffs_data);
 
 	return 0;
 }
 
+/*
+ * It is assumed that gfs_do_config is called from a context where
+ * gfs_lock is held
+ */
 static int gfs_do_config(struct usb_configuration *c)
 {
 	struct gfs_configuration *gc =
 		container_of(c, struct gfs_configuration, c);
+	int i;
 	int ret;
 
-	if (WARN_ON(!gfs_ffs_data))
+	if (missing_funcs)
 		return -ENODEV;
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -295,9 +445,11 @@ static int gfs_do_config(struct usb_configuration *c)
 			return ret;
 	}
 
-	ret = functionfs_bind_config(c->cdev, c, gfs_ffs_data);
-	if (unlikely(ret < 0))
-		return ret;
+	for (i = 0; i < func_num; i++) {
+		ret = functionfs_bind_config(c->cdev, c, ffs_tab[i].ffs_data);
+		if (unlikely(ret < 0))
+			return ret;
+	}
 
 	/*
 	 * After previous do_configs there may be some invalid
diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h
index e84b3c47ed3c..71ca193358b8 100644
--- a/drivers/usb/gadget/g_zero.h
+++ b/drivers/usb/gadget/g_zero.h
@@ -13,10 +13,11 @@ extern unsigned buflen;
 extern const struct usb_descriptor_header *otg_desc[];
 
 /* common utilities */
-struct usb_request *alloc_ep_req(struct usb_ep *ep);
+struct usb_request *alloc_ep_req(struct usb_ep *ep, int len);
 void free_ep_req(struct usb_ep *ep, struct usb_request *req);
 void disable_endpoints(struct usb_composite_dev *cdev,
-		struct usb_ep *in, struct usb_ep *out);
+		struct usb_ep *in, struct usb_ep *out,
+		struct usb_ep *iso_in, struct usb_ep *iso_out);
 
 /* configuration-specific linkup */
 int sourcesink_add(struct usb_composite_dev *cdev, bool autoresume);
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index a8855d0b7f3b..b8b3a3411218 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -37,6 +37,7 @@
 #define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
 #define gadget_is_imx(g)		(!strcmp("imx_udc", (g)->name))
 #define gadget_is_langwell(g)		(!strcmp("langwell_udc", (g)->name))
+#define gadget_is_lpc32xx(g)		(!strcmp("lpc32xx_udc", (g)->name))
 #define gadget_is_m66592(g)		(!strcmp("m66592_udc", (g)->name))
 #define gadget_is_musbhdrc(g)		(!strcmp("musb-hdrc", (g)->name))
 #define gadget_is_net2272(g)		(!strcmp("net2272", (g)->name))
@@ -118,6 +119,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x31;
 	else if (gadget_is_dwc3(gadget))
 		return 0x32;
+	else if (gadget_is_lpc32xx(gadget))
+		return 0x33;
 
 	return -ENOENT;
 }
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index e151d6b87dee..b241e6c6a7f2 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -102,7 +102,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	unsigned long	flags;
 
 	ep = container_of(_ep, struct goku_ep, ep);
-	if (!_ep || !desc || ep->desc
+	if (!_ep || !desc || ep->ep.desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT)
 		return -EINVAL;
 	dev = ep->dev;
@@ -176,7 +176,7 @@ goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	command(ep->dev->regs, COMMAND_RESET, ep->num);
 	ep->ep.maxpacket = max;
 	ep->stopped = 0;
-	ep->desc = desc;
+	ep->ep.desc = desc;
 	spin_unlock_irqrestore(&ep->dev->lock, flags);
 
 	DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name,
@@ -233,7 +233,6 @@ static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep)
 	}
 
 	ep->ep.maxpacket = MAX_FIFO_SIZE;
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 	ep->stopped = 1;
 	ep->irqs = 0;
@@ -247,7 +246,7 @@ static int goku_ep_disable(struct usb_ep *_ep)
 	unsigned long	flags;
 
 	ep = container_of(_ep, struct goku_ep, ep);
-	if (!_ep || !ep->desc)
+	if (!_ep || !ep->ep.desc)
 		return -ENODEV;
 	dev = ep->dev;
 	if (dev->ep0state == EP0_SUSPEND)
@@ -722,7 +721,7 @@ goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 			|| !_req->buf || !list_empty(&req->queue)))
 		return -EINVAL;
 	ep = container_of(_ep, struct goku_ep, ep);
-	if (unlikely(!_ep || (!ep->desc && ep->num != 0)))
+	if (unlikely(!_ep || (!ep->ep.desc && ep->num != 0)))
 		return -EINVAL;
 	dev = ep->dev;
 	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
@@ -815,7 +814,7 @@ static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 	unsigned long		flags;
 
 	ep = container_of(_ep, struct goku_ep, ep);
-	if (!_ep || !_req || (!ep->desc && ep->num != 0))
+	if (!_ep || !_req || (!ep->ep.desc && ep->num != 0))
 		return -EINVAL;
 	dev = ep->dev;
 	if (!dev->driver)
@@ -896,7 +895,7 @@ static int goku_set_halt(struct usb_ep *_ep, int value)
 			return -EINVAL;
 
 	/* don't change EPxSTATUS_EP_INVALID to READY */
-	} else if (!ep->desc) {
+	} else if (!ep->ep.desc) {
 		DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
 		return -EINVAL;
 	}
@@ -955,7 +954,7 @@ static void goku_fifo_flush(struct usb_ep *_ep)
 	VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name);
 
 	/* don't change EPxSTATUS_EP_INVALID to READY */
-	if (!ep->desc && ep->num != 0) {
+	if (!ep->ep.desc && ep->num != 0) {
 		DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
 		return;
 	}
@@ -1152,7 +1151,7 @@ udc_proc_read(char *buffer, char **start, off_t off, int count,
 		struct goku_ep		*ep = &dev->ep [i];
 		struct goku_request	*req;
 
-		if (i && !ep->desc)
+		if (i && !ep->ep.desc)
 			continue;
 
 		tmp = readl(ep->reg_status);
@@ -1473,7 +1472,8 @@ static void ep0_setup(struct goku_udc *dev)
 			case USB_RECIP_ENDPOINT:
 				tmp = le16_to_cpu(ctrl.wIndex) & 0x0f;
 				/* active endpoint */
-				if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0))
+				if (tmp > 3 ||
+				    (!dev->ep[tmp].ep.desc && tmp != 0))
 					goto stall;
 				if (ctrl.wIndex & cpu_to_le16(
 						USB_DIR_IN)) {
@@ -1895,14 +1895,4 @@ static struct pci_driver goku_pci_driver = {
 	/* FIXME add power management support */
 };
 
-static int __init init (void)
-{
-	return pci_register_driver (&goku_pci_driver);
-}
-module_init (init);
-
-static void __exit cleanup (void)
-{
-	pci_unregister_driver (&goku_pci_driver);
-}
-module_exit (cleanup);
+module_pci_driver(goku_pci_driver);
diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h
index e7e0c69d3b1f..85cdce0d1901 100644
--- a/drivers/usb/gadget/goku_udc.h
+++ b/drivers/usb/gadget/goku_udc.h
@@ -216,7 +216,6 @@ struct goku_ep {
 
 	/* analogous to a host-side qh */
 	struct list_head			queue;
-	const struct usb_endpoint_descriptor	*desc;
 
 	u32 __iomem				*reg_fifo;
 	u32 __iomem				*reg_mode;
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 8d1c75abd73d..54034f84f992 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1237,14 +1237,15 @@ irq_handler_t intr_handler(int i)
  *******************************************************************************
  */
 
-static int imx_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-static int imx_udc_stop(struct usb_gadget_driver *driver);
+static int imx_udc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
+static int imx_udc_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver);
 static const struct usb_gadget_ops imx_udc_ops = {
-	.get_frame	 = imx_udc_get_frame,
-	.wakeup		 = imx_udc_wakeup,
-	.start		= imx_udc_start,
-	.stop		= imx_udc_stop,
+	.get_frame	= imx_udc_get_frame,
+	.wakeup		= imx_udc_wakeup,
+	.udc_start	= imx_udc_start,
+	.udc_stop	= imx_udc_stop,
 };
 
 static struct imx_udc_struct controller = {
@@ -1329,23 +1330,13 @@ static struct imx_udc_struct controller = {
  * USB gadget driver functions
  *******************************************************************************
  */
-static int imx_udc_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int imx_udc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct imx_udc_struct *imx_usb = &controller;
+	struct imx_udc_struct *imx_usb;
 	int retval;
 
-	if (!driver
-		|| driver->max_speed < USB_SPEED_FULL
-		|| !bind
-		|| !driver->disconnect
-		|| !driver->setup)
-			return -EINVAL;
-	if (!imx_usb)
-		return -ENODEV;
-	if (imx_usb->driver)
-		return -EBUSY;
-
+	imx_usb = container_of(gadget, struct imx_udc_struct, gadget);
 	/* first hook up the driver ... */
 	imx_usb->driver = driver;
 	imx_usb->gadget.dev.driver = &driver->driver;
@@ -1353,14 +1344,6 @@ static int imx_udc_start(struct usb_gadget_driver *driver,
 	retval = device_add(&imx_usb->gadget.dev);
 	if (retval)
 		goto fail;
-	retval = bind(&imx_usb->gadget);
-	if (retval) {
-		D_ERR(imx_usb->dev, "<%s> bind to driver %s --> error %d\n",
-			__func__, driver->driver.name, retval);
-		device_del(&imx_usb->gadget.dev);
-
-		goto fail;
-	}
 
 	D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n",
 		__func__, driver->driver.name);
@@ -1374,20 +1357,16 @@ fail:
 	return retval;
 }
 
-static int imx_udc_stop(struct usb_gadget_driver *driver)
+static int imx_udc_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
 {
-	struct imx_udc_struct *imx_usb = &controller;
-
-	if (!imx_usb)
-		return -ENODEV;
-	if (!driver || driver != imx_usb->driver || !driver->unbind)
-		return -EINVAL;
+	struct imx_udc_struct *imx_usb = container_of(gadget,
+			struct imx_udc_struct, gadget);
 
 	udc_stop_activity(imx_usb, driver);
 	imx_udc_disable(imx_usb);
 	del_timer(&imx_usb->timer);
 
-	driver->unbind(&imx_usb->gadget);
 	imx_usb->gadget.dev.driver = NULL;
 	imx_usb->driver = NULL;
 
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
deleted file mode 100644
index f9cedd52cf20..000000000000
--- a/drivers/usb/gadget/langwell_udc.c
+++ /dev/null
@@ -1,3434 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-
-/* #undef	DEBUG */
-/* #undef	VERBOSE_DEBUG */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/otg.h>
-#include <linux/pm.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/unaligned.h>
-
-#include "langwell_udc.h"
-
-
-#define	DRIVER_DESC		"Intel Langwell USB Device Controller driver"
-#define	DRIVER_VERSION		"16 May 2009"
-
-static const char driver_name[] = "langwell_udc";
-static const char driver_desc[] = DRIVER_DESC;
-
-
-/* for endpoint 0 operations */
-static const struct usb_endpoint_descriptor
-langwell_ep0_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	0,
-	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
-	.wMaxPacketSize =	EP0_MAX_PKT_SIZE,
-};
-
-
-/*-------------------------------------------------------------------------*/
-/* debugging */
-
-#ifdef	VERBOSE_DEBUG
-static inline void print_all_registers(struct langwell_udc *dev)
-{
-	int	i;
-
-	/* Capability Registers */
-	dev_dbg(&dev->pdev->dev,
-		"Capability Registers (offset: 0x%04x, length: 0x%08x)\n",
-		CAP_REG_OFFSET, (u32)sizeof(struct langwell_cap_regs));
-	dev_dbg(&dev->pdev->dev, "caplength=0x%02x\n",
-			readb(&dev->cap_regs->caplength));
-	dev_dbg(&dev->pdev->dev, "hciversion=0x%04x\n",
-			readw(&dev->cap_regs->hciversion));
-	dev_dbg(&dev->pdev->dev, "hcsparams=0x%08x\n",
-			readl(&dev->cap_regs->hcsparams));
-	dev_dbg(&dev->pdev->dev, "hccparams=0x%08x\n",
-			readl(&dev->cap_regs->hccparams));
-	dev_dbg(&dev->pdev->dev, "dciversion=0x%04x\n",
-			readw(&dev->cap_regs->dciversion));
-	dev_dbg(&dev->pdev->dev, "dccparams=0x%08x\n",
-			readl(&dev->cap_regs->dccparams));
-
-	/* Operational Registers */
-	dev_dbg(&dev->pdev->dev,
-		"Operational Registers (offset: 0x%04x, length: 0x%08x)\n",
-		OP_REG_OFFSET, (u32)sizeof(struct langwell_op_regs));
-	dev_dbg(&dev->pdev->dev, "extsts=0x%08x\n",
-			readl(&dev->op_regs->extsts));
-	dev_dbg(&dev->pdev->dev, "extintr=0x%08x\n",
-			readl(&dev->op_regs->extintr));
-	dev_dbg(&dev->pdev->dev, "usbcmd=0x%08x\n",
-			readl(&dev->op_regs->usbcmd));
-	dev_dbg(&dev->pdev->dev, "usbsts=0x%08x\n",
-			readl(&dev->op_regs->usbsts));
-	dev_dbg(&dev->pdev->dev, "usbintr=0x%08x\n",
-			readl(&dev->op_regs->usbintr));
-	dev_dbg(&dev->pdev->dev, "frindex=0x%08x\n",
-			readl(&dev->op_regs->frindex));
-	dev_dbg(&dev->pdev->dev, "ctrldssegment=0x%08x\n",
-			readl(&dev->op_regs->ctrldssegment));
-	dev_dbg(&dev->pdev->dev, "deviceaddr=0x%08x\n",
-			readl(&dev->op_regs->deviceaddr));
-	dev_dbg(&dev->pdev->dev, "endpointlistaddr=0x%08x\n",
-			readl(&dev->op_regs->endpointlistaddr));
-	dev_dbg(&dev->pdev->dev, "ttctrl=0x%08x\n",
-			readl(&dev->op_regs->ttctrl));
-	dev_dbg(&dev->pdev->dev, "burstsize=0x%08x\n",
-			readl(&dev->op_regs->burstsize));
-	dev_dbg(&dev->pdev->dev, "txfilltuning=0x%08x\n",
-			readl(&dev->op_regs->txfilltuning));
-	dev_dbg(&dev->pdev->dev, "txttfilltuning=0x%08x\n",
-			readl(&dev->op_regs->txttfilltuning));
-	dev_dbg(&dev->pdev->dev, "ic_usb=0x%08x\n",
-			readl(&dev->op_regs->ic_usb));
-	dev_dbg(&dev->pdev->dev, "ulpi_viewport=0x%08x\n",
-			readl(&dev->op_regs->ulpi_viewport));
-	dev_dbg(&dev->pdev->dev, "configflag=0x%08x\n",
-			readl(&dev->op_regs->configflag));
-	dev_dbg(&dev->pdev->dev, "portsc1=0x%08x\n",
-			readl(&dev->op_regs->portsc1));
-	dev_dbg(&dev->pdev->dev, "devlc=0x%08x\n",
-			readl(&dev->op_regs->devlc));
-	dev_dbg(&dev->pdev->dev, "otgsc=0x%08x\n",
-			readl(&dev->op_regs->otgsc));
-	dev_dbg(&dev->pdev->dev, "usbmode=0x%08x\n",
-			readl(&dev->op_regs->usbmode));
-	dev_dbg(&dev->pdev->dev, "endptnak=0x%08x\n",
-			readl(&dev->op_regs->endptnak));
-	dev_dbg(&dev->pdev->dev, "endptnaken=0x%08x\n",
-			readl(&dev->op_regs->endptnaken));
-	dev_dbg(&dev->pdev->dev, "endptsetupstat=0x%08x\n",
-			readl(&dev->op_regs->endptsetupstat));
-	dev_dbg(&dev->pdev->dev, "endptprime=0x%08x\n",
-			readl(&dev->op_regs->endptprime));
-	dev_dbg(&dev->pdev->dev, "endptflush=0x%08x\n",
-			readl(&dev->op_regs->endptflush));
-	dev_dbg(&dev->pdev->dev, "endptstat=0x%08x\n",
-			readl(&dev->op_regs->endptstat));
-	dev_dbg(&dev->pdev->dev, "endptcomplete=0x%08x\n",
-			readl(&dev->op_regs->endptcomplete));
-
-	for (i = 0; i < dev->ep_max / 2; i++) {
-		dev_dbg(&dev->pdev->dev, "endptctrl[%d]=0x%08x\n",
-				i, readl(&dev->op_regs->endptctrl[i]));
-	}
-}
-#else
-
-#define	print_all_registers(dev)	do { } while (0)
-
-#endif /* VERBOSE_DEBUG */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define	is_in(ep)	(((ep)->ep_num == 0) ? ((ep)->dev->ep0_dir ==	\
-			USB_DIR_IN) : (usb_endpoint_dir_in((ep)->desc)))
-
-#define	DIR_STRING(ep)	(is_in(ep) ? "in" : "out")
-
-
-static char *type_string(const struct usb_endpoint_descriptor *desc)
-{
-	switch (usb_endpoint_type(desc)) {
-	case USB_ENDPOINT_XFER_BULK:
-		return "bulk";
-	case USB_ENDPOINT_XFER_ISOC:
-		return "iso";
-	case USB_ENDPOINT_XFER_INT:
-		return "int";
-	};
-
-	return "control";
-}
-
-
-/* configure endpoint control registers */
-static void ep_reset(struct langwell_ep *ep, unsigned char ep_num,
-		unsigned char is_in, unsigned char ep_type)
-{
-	struct langwell_udc	*dev;
-	u32			endptctrl;
-
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-	if (is_in) {	/* TX */
-		if (ep_num)
-			endptctrl |= EPCTRL_TXR;
-		endptctrl |= EPCTRL_TXE;
-		endptctrl |= ep_type << EPCTRL_TXT_SHIFT;
-	} else {	/* RX */
-		if (ep_num)
-			endptctrl |= EPCTRL_RXR;
-		endptctrl |= EPCTRL_RXE;
-		endptctrl |= ep_type << EPCTRL_RXT_SHIFT;
-	}
-
-	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* reset ep0 dQH and endptctrl */
-static void ep0_reset(struct langwell_udc *dev)
-{
-	struct langwell_ep	*ep;
-	int			i;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* ep0 in and out */
-	for (i = 0; i < 2; i++) {
-		ep = &dev->ep[i];
-		ep->dev = dev;
-
-		/* ep0 dQH */
-		ep->dqh = &dev->ep_dqh[i];
-
-		/* configure ep0 endpoint capabilities in dQH */
-		ep->dqh->dqh_ios = 1;
-		ep->dqh->dqh_mpl = EP0_MAX_PKT_SIZE;
-
-		/* enable ep0-in HW zero length termination select */
-		if (is_in(ep))
-			ep->dqh->dqh_zlt = 0;
-		ep->dqh->dqh_mult = 0;
-
-		ep->dqh->dtd_next = DTD_TERM;
-
-		/* configure ep0 control registers */
-		ep_reset(&dev->ep[0], 0, i, USB_ENDPOINT_XFER_CONTROL);
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoints operations */
-
-/* configure endpoint, making it usable */
-static int langwell_ep_enable(struct usb_ep *_ep,
-		const struct usb_endpoint_descriptor *desc)
-{
-	struct langwell_udc	*dev;
-	struct langwell_ep	*ep;
-	u16			max = 0;
-	unsigned long		flags;
-	int			i, retval = 0;
-	unsigned char		zlt, ios = 0, mult = 0;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !desc || ep->desc
-			|| desc->bDescriptorType != USB_DT_ENDPOINT)
-		return -EINVAL;
-
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
-
-	max = usb_endpoint_maxp(desc);
-
-	/*
-	 * disable HW zero length termination select
-	 * driver handles zero length packet through req->req.zero
-	 */
-	zlt = 1;
-
-	/*
-	 * sanity check type, direction, address, and then
-	 * initialize the endpoint capabilities fields in dQH
-	 */
-	switch (usb_endpoint_type(desc)) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		ios = 1;
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		if ((dev->gadget.speed == USB_SPEED_HIGH
-					&& max != 512)
-				|| (dev->gadget.speed == USB_SPEED_FULL
-					&& max > 64)) {
-			goto done;
-		}
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
-			goto done;
-
-		switch (dev->gadget.speed) {
-		case USB_SPEED_HIGH:
-			if (max <= 1024)
-				break;
-		case USB_SPEED_FULL:
-			if (max <= 64)
-				break;
-		default:
-			if (max <= 8)
-				break;
-			goto done;
-		}
-		break;
-	case USB_ENDPOINT_XFER_ISOC:
-		if (strstr(ep->ep.name, "-bulk")
-				|| strstr(ep->ep.name, "-int"))
-			goto done;
-
-		switch (dev->gadget.speed) {
-		case USB_SPEED_HIGH:
-			if (max <= 1024)
-				break;
-		case USB_SPEED_FULL:
-			if (max <= 1023)
-				break;
-		default:
-			goto done;
-		}
-		/*
-		 * FIXME:
-		 * calculate transactions needed for high bandwidth iso
-		 */
-		mult = (unsigned char)(1 + ((max >> 11) & 0x03));
-		max = max & 0x8ff;	/* bit 0~10 */
-		/* 3 transactions at most */
-		if (mult > 3)
-			goto done;
-		break;
-	default:
-		goto done;
-	}
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	ep->ep.maxpacket = max;
-	ep->desc = desc;
-	ep->stopped = 0;
-	ep->ep_num = usb_endpoint_num(desc);
-
-	/* ep_type */
-	ep->ep_type = usb_endpoint_type(desc);
-
-	/* configure endpoint control registers */
-	ep_reset(ep, ep->ep_num, is_in(ep), ep->ep_type);
-
-	/* configure endpoint capabilities in dQH */
-	i = ep->ep_num * 2 + is_in(ep);
-	ep->dqh = &dev->ep_dqh[i];
-	ep->dqh->dqh_ios = ios;
-	ep->dqh->dqh_mpl = cpu_to_le16(max);
-	ep->dqh->dqh_zlt = zlt;
-	ep->dqh->dqh_mult = mult;
-	ep->dqh->dtd_next = DTD_TERM;
-
-	dev_dbg(&dev->pdev->dev, "enabled %s (ep%d%s-%s), max %04x\n",
-			_ep->name,
-			ep->ep_num,
-			DIR_STRING(ep),
-			type_string(desc),
-			max);
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-done:
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return retval;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* retire a request */
-static void done(struct langwell_ep *ep, struct langwell_request *req,
-		int status)
-{
-	struct langwell_udc	*dev = ep->dev;
-	unsigned		stopped = ep->stopped;
-	struct langwell_dtd	*curr_dtd, *next_dtd;
-	int			i;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* remove the req from ep->queue */
-	list_del_init(&req->queue);
-
-	if (req->req.status == -EINPROGRESS)
-		req->req.status = status;
-	else
-		status = req->req.status;
-
-	/* free dTD for the request */
-	next_dtd = req->head;
-	for (i = 0; i < req->dtd_count; i++) {
-		curr_dtd = next_dtd;
-		if (i != req->dtd_count - 1)
-			next_dtd = curr_dtd->next_dtd_virt;
-		dma_pool_free(dev->dtd_pool, curr_dtd, curr_dtd->dtd_dma);
-	}
-
-	usb_gadget_unmap_request(&dev->gadget, &req->req, is_in(ep));
-
-	if (status != -ESHUTDOWN)
-		dev_dbg(&dev->pdev->dev,
-				"complete %s, req %p, stat %d, len %u/%u\n",
-				ep->ep.name, &req->req, status,
-				req->req.actual, req->req.length);
-
-	/* don't modify queue heads during completion callback */
-	ep->stopped = 1;
-
-	spin_unlock(&dev->lock);
-	/* complete routine from gadget driver */
-	if (req->req.complete)
-		req->req.complete(&ep->ep, &req->req);
-
-	spin_lock(&dev->lock);
-	ep->stopped = stopped;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-static void langwell_ep_fifo_flush(struct usb_ep *_ep);
-
-/* delete all endpoint requests, called with spinlock held */
-static void nuke(struct langwell_ep *ep, int status)
-{
-	/* called with spinlock held */
-	ep->stopped = 1;
-
-	/* endpoint fifo flush */
-	if (&ep->ep && ep->desc)
-		langwell_ep_fifo_flush(&ep->ep);
-
-	while (!list_empty(&ep->queue)) {
-		struct langwell_request	*req = NULL;
-		req = list_entry(ep->queue.next, struct langwell_request,
-				queue);
-		done(ep, req, status);
-	}
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoint is no longer usable */
-static int langwell_ep_disable(struct usb_ep *_ep)
-{
-	struct langwell_ep	*ep;
-	unsigned long		flags;
-	struct langwell_udc	*dev;
-	int			ep_num;
-	u32			endptctrl;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !ep->desc)
-		return -EINVAL;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* disable endpoint control register */
-	ep_num = ep->ep_num;
-	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-	if (is_in(ep))
-		endptctrl &= ~EPCTRL_TXE;
-	else
-		endptctrl &= ~EPCTRL_RXE;
-	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-	/* nuke all pending requests (does flush) */
-	nuke(ep, -ESHUTDOWN);
-
-	ep->desc = NULL;
-	ep->ep.desc = NULL;
-	ep->stopped = 1;
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_dbg(&dev->pdev->dev, "disabled %s\n", _ep->name);
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-	return 0;
-}
-
-
-/* allocate a request object to use with this endpoint */
-static struct usb_request *langwell_alloc_request(struct usb_ep *_ep,
-		gfp_t gfp_flags)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	struct langwell_request	*req = NULL;
-
-	if (!_ep)
-		return NULL;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	req = kzalloc(sizeof(*req), gfp_flags);
-	if (!req)
-		return NULL;
-
-	req->req.dma = DMA_ADDR_INVALID;
-	INIT_LIST_HEAD(&req->queue);
-
-	dev_vdbg(&dev->pdev->dev, "alloc request for %s\n", _ep->name);
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return &req->req;
-}
-
-
-/* free a request object */
-static void langwell_free_request(struct usb_ep *_ep,
-		struct usb_request *_req)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	struct langwell_request	*req = NULL;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !_req)
-		return;
-
-	req = container_of(_req, struct langwell_request, req);
-	WARN_ON(!list_empty(&req->queue));
-
-	if (_req)
-		kfree(req);
-
-	dev_vdbg(&dev->pdev->dev, "free request for %s\n", _ep->name);
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* queue dTD and PRIME endpoint */
-static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
-{
-	u32			bit_mask, usbcmd, endptstat, dtd_dma;
-	u8			dtd_status;
-	int			i;
-	struct langwell_dqh	*dqh;
-	struct langwell_udc	*dev;
-
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	i = ep->ep_num * 2 + is_in(ep);
-	dqh = &dev->ep_dqh[i];
-
-	if (ep->ep_num)
-		dev_vdbg(&dev->pdev->dev, "%s\n", ep->name);
-	else
-		/* ep0 */
-		dev_vdbg(&dev->pdev->dev, "%s-%s\n", ep->name, DIR_STRING(ep));
-
-	dev_vdbg(&dev->pdev->dev, "ep_dqh[%d] addr: 0x%p\n",
-			i, &(dev->ep_dqh[i]));
-
-	bit_mask = is_in(ep) ?
-		(1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
-
-	dev_vdbg(&dev->pdev->dev, "bit_mask = 0x%08x\n", bit_mask);
-
-	/* check if the pipe is empty */
-	if (!(list_empty(&ep->queue))) {
-		/* add dTD to the end of linked list */
-		struct langwell_request	*lastreq;
-		lastreq = list_entry(ep->queue.prev,
-				struct langwell_request, queue);
-
-		lastreq->tail->dtd_next =
-			cpu_to_le32(req->head->dtd_dma & DTD_NEXT_MASK);
-
-		/* read prime bit, if 1 goto out */
-		if (readl(&dev->op_regs->endptprime) & bit_mask)
-			goto out;
-
-		do {
-			/* set ATDTW bit in USBCMD */
-			usbcmd = readl(&dev->op_regs->usbcmd);
-			writel(usbcmd | CMD_ATDTW, &dev->op_regs->usbcmd);
-
-			/* read correct status bit */
-			endptstat = readl(&dev->op_regs->endptstat) & bit_mask;
-
-		} while (!(readl(&dev->op_regs->usbcmd) & CMD_ATDTW));
-
-		/* write ATDTW bit to 0 */
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		writel(usbcmd & ~CMD_ATDTW, &dev->op_regs->usbcmd);
-
-		if (endptstat)
-			goto out;
-	}
-
-	/* write dQH next pointer and terminate bit to 0 */
-	dtd_dma = req->head->dtd_dma & DTD_NEXT_MASK;
-	dqh->dtd_next = cpu_to_le32(dtd_dma);
-
-	/* clear active and halt bit */
-	dtd_status = (u8) ~(DTD_STS_ACTIVE | DTD_STS_HALTED);
-	dqh->dtd_status &= dtd_status;
-	dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
-
-	/* ensure that updates to the dQH will occur before priming */
-	wmb();
-
-	/* write 1 to endptprime register to PRIME endpoint */
-	bit_mask = is_in(ep) ? (1 << (ep->ep_num + 16)) : (1 << ep->ep_num);
-	dev_vdbg(&dev->pdev->dev, "endprime bit_mask = 0x%08x\n", bit_mask);
-	writel(bit_mask, &dev->op_regs->endptprime);
-out:
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* fill in the dTD structure to build a transfer descriptor */
-static struct langwell_dtd *build_dtd(struct langwell_request *req,
-		unsigned *length, dma_addr_t *dma, int *is_last)
-{
-	u32			 buf_ptr;
-	struct langwell_dtd	*dtd;
-	struct langwell_udc	*dev;
-	int			i;
-
-	dev = req->ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* the maximum transfer length, up to 16k bytes */
-	*length = min(req->req.length - req->req.actual,
-			(unsigned)DTD_MAX_TRANSFER_LENGTH);
-
-	/* create dTD dma_pool resource */
-	dtd = dma_pool_alloc(dev->dtd_pool, GFP_KERNEL, dma);
-	if (dtd == NULL)
-		return dtd;
-	dtd->dtd_dma = *dma;
-
-	/* initialize buffer page pointers */
-	buf_ptr = (u32)(req->req.dma + req->req.actual);
-	for (i = 0; i < 5; i++)
-		dtd->dtd_buf[i] = cpu_to_le32(buf_ptr + i * PAGE_SIZE);
-
-	req->req.actual += *length;
-
-	/* fill in total bytes with transfer size */
-	dtd->dtd_total = cpu_to_le16(*length);
-	dev_vdbg(&dev->pdev->dev, "dtd->dtd_total = %d\n", dtd->dtd_total);
-
-	/* set is_last flag if req->req.zero is set or not */
-	if (req->req.zero) {
-		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
-			*is_last = 1;
-		else
-			*is_last = 0;
-	} else if (req->req.length == req->req.actual) {
-		*is_last = 1;
-	} else
-		*is_last = 0;
-
-	if (*is_last == 0)
-		dev_vdbg(&dev->pdev->dev, "multi-dtd request!\n");
-
-	/* set interrupt on complete bit for the last dTD */
-	if (*is_last && !req->req.no_interrupt)
-		dtd->dtd_ioc = 1;
-
-	/* set multiplier override 0 for non-ISO and non-TX endpoint */
-	dtd->dtd_multo = 0;
-
-	/* set the active bit of status field to 1 */
-	dtd->dtd_status = DTD_STS_ACTIVE;
-	dev_vdbg(&dev->pdev->dev, "dtd->dtd_status = 0x%02x\n",
-			dtd->dtd_status);
-
-	dev_vdbg(&dev->pdev->dev, "length = %d, dma addr= 0x%08x\n",
-			*length, (int)*dma);
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return dtd;
-}
-
-
-/* generate dTD linked list for a request */
-static int req_to_dtd(struct langwell_request *req)
-{
-	unsigned		count;
-	int			is_last, is_first = 1;
-	struct langwell_dtd	*dtd, *last_dtd = NULL;
-	struct langwell_udc	*dev;
-	dma_addr_t		dma;
-
-	dev = req->ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-	do {
-		dtd = build_dtd(req, &count, &dma, &is_last);
-		if (dtd == NULL)
-			return -ENOMEM;
-
-		if (is_first) {
-			is_first = 0;
-			req->head = dtd;
-		} else {
-			last_dtd->dtd_next = cpu_to_le32(dma);
-			last_dtd->next_dtd_virt = dtd;
-		}
-		last_dtd = dtd;
-		req->dtd_count++;
-	} while (!is_last);
-
-	/* set terminate bit to 1 for the last dTD */
-	dtd->dtd_next = DTD_TERM;
-
-	req->tail = dtd;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* queue (submits) an I/O requests to an endpoint */
-static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
-		gfp_t gfp_flags)
-{
-	struct langwell_request	*req;
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	unsigned long		flags;
-	int			is_iso = 0;
-	int			ret;
-
-	/* always require a cpu-view buffer */
-	req = container_of(_req, struct langwell_request, req);
-	ep = container_of(_ep, struct langwell_ep, ep);
-
-	if (!_req || !_req->complete || !_req->buf
-			|| !list_empty(&req->queue)) {
-		return -EINVAL;
-	}
-
-	if (unlikely(!_ep || !ep->desc))
-		return -EINVAL;
-
-	dev = ep->dev;
-	req->ep = ep;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (usb_endpoint_xfer_isoc(ep->desc)) {
-		if (req->req.length > ep->ep.maxpacket)
-			return -EMSGSIZE;
-		is_iso = 1;
-	}
-
-	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
-		return -ESHUTDOWN;
-
-	/* set up dma mapping */
-	ret = usb_gadget_map_request(&dev->gadget, &req->req, is_in(ep));
-	if (ret)
-		return ret;
-
-	dev_dbg(&dev->pdev->dev,
-			"%s queue req %p, len %u, buf %p, dma 0x%08x\n",
-			_ep->name,
-			_req, _req->length, _req->buf, (int)_req->dma);
-
-	_req->status = -EINPROGRESS;
-	_req->actual = 0;
-	req->dtd_count = 0;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* build and put dTDs to endpoint queue */
-	if (!req_to_dtd(req)) {
-		queue_dtd(ep, req);
-	} else {
-		spin_unlock_irqrestore(&dev->lock, flags);
-		return -ENOMEM;
-	}
-
-	/* update ep0 state */
-	if (ep->ep_num == 0)
-		dev->ep0_state = DATA_STATE_XMIT;
-
-	if (likely(req != NULL)) {
-		list_add_tail(&req->queue, &ep->queue);
-		dev_vdbg(&dev->pdev->dev, "list_add_tail()\n");
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* dequeue (cancels, unlinks) an I/O request from an endpoint */
-static int langwell_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	struct langwell_request	*req;
-	unsigned long		flags;
-	int			stopped, ep_num, retval = 0;
-	u32			endptctrl;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !ep->desc || !_req)
-		return -EINVAL;
-
-	if (!dev->driver)
-		return -ESHUTDOWN;
-
-	spin_lock_irqsave(&dev->lock, flags);
-	stopped = ep->stopped;
-
-	/* quiesce dma while we patch the queue */
-	ep->stopped = 1;
-	ep_num = ep->ep_num;
-
-	/* disable endpoint control register */
-	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-	if (is_in(ep))
-		endptctrl &= ~EPCTRL_TXE;
-	else
-		endptctrl &= ~EPCTRL_RXE;
-	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-	/* make sure it's still queued on this endpoint */
-	list_for_each_entry(req, &ep->queue, queue) {
-		if (&req->req == _req)
-			break;
-	}
-
-	if (&req->req != _req) {
-		retval = -EINVAL;
-		goto done;
-	}
-
-	/* queue head may be partially complete. */
-	if (ep->queue.next == &req->queue) {
-		dev_dbg(&dev->pdev->dev, "unlink (%s) dma\n", _ep->name);
-		_req->status = -ECONNRESET;
-		langwell_ep_fifo_flush(&ep->ep);
-
-		/* not the last request in endpoint queue */
-		if (likely(ep->queue.next == &req->queue)) {
-			struct langwell_dqh	*dqh;
-			struct langwell_request	*next_req;
-
-			dqh = ep->dqh;
-			next_req = list_entry(req->queue.next,
-					struct langwell_request, queue);
-
-			/* point the dQH to the first dTD of next request */
-			writel((u32) next_req->head, &dqh->dqh_current);
-		}
-	} else {
-		struct langwell_request	*prev_req;
-
-		prev_req = list_entry(req->queue.prev,
-				struct langwell_request, queue);
-		writel(readl(&req->tail->dtd_next),
-				&prev_req->tail->dtd_next);
-	}
-
-	done(ep, req, -ECONNRESET);
-
-done:
-	/* enable endpoint again */
-	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-	if (is_in(ep))
-		endptctrl |= EPCTRL_TXE;
-	else
-		endptctrl |= EPCTRL_RXE;
-	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-	ep->stopped = stopped;
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return retval;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoint set/clear halt */
-static void ep_set_halt(struct langwell_ep *ep, int value)
-{
-	u32			endptctrl = 0;
-	int			ep_num;
-	struct langwell_udc	*dev = ep->dev;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	ep_num = ep->ep_num;
-	endptctrl = readl(&dev->op_regs->endptctrl[ep_num]);
-
-	/* value: 1 - set halt, 0 - clear halt */
-	if (value) {
-		/* set the stall bit */
-		if (is_in(ep))
-			endptctrl |= EPCTRL_TXS;
-		else
-			endptctrl |= EPCTRL_RXS;
-	} else {
-		/* clear the stall bit and reset data toggle */
-		if (is_in(ep)) {
-			endptctrl &= ~EPCTRL_TXS;
-			endptctrl |= EPCTRL_TXR;
-		} else {
-			endptctrl &= ~EPCTRL_RXS;
-			endptctrl |= EPCTRL_RXR;
-		}
-	}
-
-	writel(endptctrl, &dev->op_regs->endptctrl[ep_num]);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* set the endpoint halt feature */
-static int langwell_ep_set_halt(struct usb_ep *_ep, int value)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	unsigned long		flags;
-	int			retval = 0;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !ep->desc)
-		return -EINVAL;
-
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
-
-	if (usb_endpoint_xfer_isoc(ep->desc))
-		return  -EOPNOTSUPP;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/*
-	 * attempt to halt IN ep will fail if any transfer requests
-	 * are still queue
-	 */
-	if (!list_empty(&ep->queue) && is_in(ep) && value) {
-		/* IN endpoint FIFO holds bytes */
-		dev_dbg(&dev->pdev->dev, "%s FIFO holds bytes\n", _ep->name);
-		retval = -EAGAIN;
-		goto done;
-	}
-
-	/* endpoint set/clear halt */
-	if (ep->ep_num) {
-		ep_set_halt(ep, value);
-	} else { /* endpoint 0 */
-		dev->ep0_state = WAIT_FOR_SETUP;
-		dev->ep0_dir = USB_DIR_OUT;
-	}
-done:
-	spin_unlock_irqrestore(&dev->lock, flags);
-	dev_dbg(&dev->pdev->dev, "%s %s halt\n",
-			_ep->name, value ? "set" : "clear");
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return retval;
-}
-
-
-/* set the halt feature and ignores clear requests */
-static int langwell_ep_set_wedge(struct usb_ep *_ep)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !ep->desc)
-		return -EINVAL;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return usb_ep_set_halt(_ep);
-}
-
-
-/* flush contents of a fifo */
-static void langwell_ep_fifo_flush(struct usb_ep *_ep)
-{
-	struct langwell_ep	*ep;
-	struct langwell_udc	*dev;
-	u32			flush_bit;
-	unsigned long		timeout;
-
-	ep = container_of(_ep, struct langwell_ep, ep);
-	dev = ep->dev;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (!_ep || !ep->desc) {
-		dev_vdbg(&dev->pdev->dev, "ep or ep->desc is NULL\n");
-		dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		return;
-	}
-
-	dev_vdbg(&dev->pdev->dev, "%s-%s fifo flush\n",
-			_ep->name, DIR_STRING(ep));
-
-	/* flush endpoint buffer */
-	if (ep->ep_num == 0)
-		flush_bit = (1 << 16) | 1;
-	else if (is_in(ep))
-		flush_bit = 1 << (ep->ep_num + 16);	/* TX */
-	else
-		flush_bit = 1 << ep->ep_num;		/* RX */
-
-	/* wait until flush complete */
-	timeout = jiffies + FLUSH_TIMEOUT;
-	do {
-		writel(flush_bit, &dev->op_regs->endptflush);
-		while (readl(&dev->op_regs->endptflush)) {
-			if (time_after(jiffies, timeout)) {
-				dev_err(&dev->pdev->dev, "ep flush timeout\n");
-				goto done;
-			}
-			cpu_relax();
-		}
-	} while (readl(&dev->op_regs->endptstat) & flush_bit);
-done:
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* endpoints operations structure */
-static const struct usb_ep_ops langwell_ep_ops = {
-
-	/* configure endpoint, making it usable */
-	.enable		= langwell_ep_enable,
-
-	/* endpoint is no longer usable */
-	.disable	= langwell_ep_disable,
-
-	/* allocate a request object to use with this endpoint */
-	.alloc_request	= langwell_alloc_request,
-
-	/* free a request object */
-	.free_request	= langwell_free_request,
-
-	/* queue (submits) an I/O requests to an endpoint */
-	.queue		= langwell_ep_queue,
-
-	/* dequeue (cancels, unlinks) an I/O request from an endpoint */
-	.dequeue	= langwell_ep_dequeue,
-
-	/* set the endpoint halt feature */
-	.set_halt	= langwell_ep_set_halt,
-
-	/* set the halt feature and ignores clear requests */
-	.set_wedge	= langwell_ep_set_wedge,
-
-	/* flush contents of a fifo */
-	.fifo_flush	= langwell_ep_fifo_flush,
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device controller usb_gadget_ops structure */
-
-/* returns the current frame number */
-static int langwell_get_frame(struct usb_gadget *_gadget)
-{
-	struct langwell_udc	*dev;
-	u16			retval;
-
-	if (!_gadget)
-		return -ENODEV;
-
-	dev = container_of(_gadget, struct langwell_udc, gadget);
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	retval = readl(&dev->op_regs->frindex) & FRINDEX_MASK;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return retval;
-}
-
-
-/* enter or exit PHY low power state */
-static void langwell_phy_low_power(struct langwell_udc *dev, bool flag)
-{
-	u32		devlc;
-	u8		devlc_byte2;
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	devlc = readl(&dev->op_regs->devlc);
-	dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
-
-	if (flag)
-		devlc |= LPM_PHCD;
-	else
-		devlc &= ~LPM_PHCD;
-
-	/* FIXME: workaround for Langwell A1/A2/A3 sighting */
-	devlc_byte2 = (devlc >> 16) & 0xff;
-	writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
-
-	devlc = readl(&dev->op_regs->devlc);
-	dev_vdbg(&dev->pdev->dev,
-			"%s PHY low power suspend, devlc = 0x%08x\n",
-			flag ? "enter" : "exit", devlc);
-}
-
-
-/* tries to wake up the host connected to this gadget */
-static int langwell_wakeup(struct usb_gadget *_gadget)
-{
-	struct langwell_udc	*dev;
-	u32			portsc1;
-	unsigned long		flags;
-
-	if (!_gadget)
-		return 0;
-
-	dev = container_of(_gadget, struct langwell_udc, gadget);
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* remote wakeup feature not enabled by host */
-	if (!dev->remote_wakeup) {
-		dev_info(&dev->pdev->dev, "remote wakeup is disabled\n");
-		return -ENOTSUPP;
-	}
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	portsc1 = readl(&dev->op_regs->portsc1);
-	if (!(portsc1 & PORTS_SUSP)) {
-		spin_unlock_irqrestore(&dev->lock, flags);
-		return 0;
-	}
-
-	/* LPM L1 to L0 or legacy remote wakeup */
-	if (dev->lpm && dev->lpm_state == LPM_L1)
-		dev_info(&dev->pdev->dev, "LPM L1 to L0 remote wakeup\n");
-	else
-		dev_info(&dev->pdev->dev, "device remote wakeup\n");
-
-	/* exit PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 0);
-
-	/* force port resume */
-	portsc1 |= PORTS_FPR;
-	writel(portsc1, &dev->op_regs->portsc1);
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* notify controller that VBUS is powered or not */
-static int langwell_vbus_session(struct usb_gadget *_gadget, int is_active)
-{
-	struct langwell_udc	*dev;
-	unsigned long		flags;
-	u32			usbcmd;
-
-	if (!_gadget)
-		return -ENODEV;
-
-	dev = container_of(_gadget, struct langwell_udc, gadget);
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	dev_vdbg(&dev->pdev->dev, "VBUS status: %s\n",
-			is_active ? "on" : "off");
-
-	dev->vbus_active = (is_active != 0);
-	if (dev->driver && dev->softconnected && dev->vbus_active) {
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		usbcmd |= CMD_RUNSTOP;
-		writel(usbcmd, &dev->op_regs->usbcmd);
-	} else {
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		usbcmd &= ~CMD_RUNSTOP;
-		writel(usbcmd, &dev->op_regs->usbcmd);
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* constrain controller's VBUS power usage */
-static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
-{
-	struct langwell_udc	*dev;
-
-	if (!_gadget)
-		return -ENODEV;
-
-	dev = container_of(_gadget, struct langwell_udc, gadget);
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (dev->transceiver) {
-		dev_vdbg(&dev->pdev->dev, "usb_phy_set_power\n");
-		dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		return usb_phy_set_power(dev->transceiver, mA);
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return -ENOTSUPP;
-}
-
-
-/* D+ pullup, software-controlled connect/disconnect to USB host */
-static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
-{
-	struct langwell_udc	*dev;
-	u32			usbcmd;
-	unsigned long		flags;
-
-	if (!_gadget)
-		return -ENODEV;
-
-	dev = container_of(_gadget, struct langwell_udc, gadget);
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	dev->softconnected = (is_on != 0);
-
-	if (dev->driver && dev->softconnected && dev->vbus_active) {
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		usbcmd |= CMD_RUNSTOP;
-		writel(usbcmd, &dev->op_regs->usbcmd);
-	} else {
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		usbcmd &= ~CMD_RUNSTOP;
-		writel(usbcmd, &dev->op_regs->usbcmd);
-	}
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-static int langwell_start(struct usb_gadget *g,
-		struct usb_gadget_driver *driver);
-
-static int langwell_stop(struct usb_gadget *g,
-		struct usb_gadget_driver *driver);
-
-/* device controller usb_gadget_ops structure */
-static const struct usb_gadget_ops langwell_ops = {
-
-	/* returns the current frame number */
-	.get_frame	= langwell_get_frame,
-
-	/* tries to wake up the host connected to this gadget */
-	.wakeup		= langwell_wakeup,
-
-	/* set the device selfpowered feature, always selfpowered */
-	/* .set_selfpowered = langwell_set_selfpowered, */
-
-	/* notify controller that VBUS is powered or not */
-	.vbus_session	= langwell_vbus_session,
-
-	/* constrain controller's VBUS power usage */
-	.vbus_draw	= langwell_vbus_draw,
-
-	/* D+ pullup, software-controlled connect/disconnect to USB host */
-	.pullup		= langwell_pullup,
-
-	.udc_start	= langwell_start,
-	.udc_stop	= langwell_stop,
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device controller operations */
-
-/* reset device controller */
-static int langwell_udc_reset(struct langwell_udc *dev)
-{
-	u32		usbcmd, usbmode, devlc, endpointlistaddr;
-	u8		devlc_byte0, devlc_byte2;
-	unsigned long	timeout;
-
-	if (!dev)
-		return -EINVAL;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* set controller to stop state */
-	usbcmd = readl(&dev->op_regs->usbcmd);
-	usbcmd &= ~CMD_RUNSTOP;
-	writel(usbcmd, &dev->op_regs->usbcmd);
-
-	/* reset device controller */
-	usbcmd = readl(&dev->op_regs->usbcmd);
-	usbcmd |= CMD_RST;
-	writel(usbcmd, &dev->op_regs->usbcmd);
-
-	/* wait for reset to complete */
-	timeout = jiffies + RESET_TIMEOUT;
-	while (readl(&dev->op_regs->usbcmd) & CMD_RST) {
-		if (time_after(jiffies, timeout)) {
-			dev_err(&dev->pdev->dev, "device reset timeout\n");
-			return -ETIMEDOUT;
-		}
-		cpu_relax();
-	}
-
-	/* set controller to device mode */
-	usbmode = readl(&dev->op_regs->usbmode);
-	usbmode |= MODE_DEVICE;
-
-	/* turn setup lockout off, require setup tripwire in usbcmd */
-	usbmode |= MODE_SLOM;
-
-	writel(usbmode, &dev->op_regs->usbmode);
-	usbmode = readl(&dev->op_regs->usbmode);
-	dev_vdbg(&dev->pdev->dev, "usbmode=0x%08x\n", usbmode);
-
-	/* Write-Clear setup status */
-	writel(0, &dev->op_regs->usbsts);
-
-	/* if support USB LPM, ACK all LPM token */
-	if (dev->lpm) {
-		devlc = readl(&dev->op_regs->devlc);
-		dev_vdbg(&dev->pdev->dev, "devlc = 0x%08x\n", devlc);
-		/* FIXME: workaround for Langwell A1/A2/A3 sighting */
-		devlc &= ~LPM_STL;	/* don't STALL LPM token */
-		devlc &= ~LPM_NYT_ACK;	/* ACK LPM token */
-		devlc_byte0 = devlc & 0xff;
-		devlc_byte2 = (devlc >> 16) & 0xff;
-		writeb(devlc_byte0, (u8 *)&dev->op_regs->devlc);
-		writeb(devlc_byte2, (u8 *)&dev->op_regs->devlc + 2);
-		devlc = readl(&dev->op_regs->devlc);
-		dev_vdbg(&dev->pdev->dev,
-				"ACK LPM token, devlc = 0x%08x\n", devlc);
-	}
-
-	/* fill endpointlistaddr register */
-	endpointlistaddr = dev->ep_dqh_dma;
-	endpointlistaddr &= ENDPOINTLISTADDR_MASK;
-	writel(endpointlistaddr, &dev->op_regs->endpointlistaddr);
-
-	dev_vdbg(&dev->pdev->dev,
-		"dQH base (vir: %p, phy: 0x%08x), endpointlistaddr=0x%08x\n",
-		dev->ep_dqh, endpointlistaddr,
-		readl(&dev->op_regs->endpointlistaddr));
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* reinitialize device controller endpoints */
-static int eps_reinit(struct langwell_udc *dev)
-{
-	struct langwell_ep	*ep;
-	char			name[14];
-	int			i;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* initialize ep0 */
-	ep = &dev->ep[0];
-	ep->dev = dev;
-	strncpy(ep->name, "ep0", sizeof(ep->name));
-	ep->ep.name = ep->name;
-	ep->ep.ops = &langwell_ep_ops;
-	ep->stopped = 0;
-	ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
-	ep->ep_num = 0;
-	ep->desc = &langwell_ep0_desc;
-	INIT_LIST_HEAD(&ep->queue);
-
-	ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
-
-	/* initialize other endpoints */
-	for (i = 2; i < dev->ep_max; i++) {
-		ep = &dev->ep[i];
-		if (i % 2)
-			snprintf(name, sizeof(name), "ep%din", i / 2);
-		else
-			snprintf(name, sizeof(name), "ep%dout", i / 2);
-		ep->dev = dev;
-		strncpy(ep->name, name, sizeof(ep->name));
-		ep->ep.name = ep->name;
-
-		ep->ep.ops = &langwell_ep_ops;
-		ep->stopped = 0;
-		ep->ep.maxpacket = (unsigned short) ~0;
-		ep->ep_num = i / 2;
-
-		INIT_LIST_HEAD(&ep->queue);
-		list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* enable interrupt and set controller to run state */
-static void langwell_udc_start(struct langwell_udc *dev)
-{
-	u32	usbintr, usbcmd;
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* enable interrupts */
-	usbintr = INTR_ULPIE	/* ULPI */
-		| INTR_SLE	/* suspend */
-		/* | INTR_SRE	SOF received */
-		| INTR_URE	/* USB reset */
-		| INTR_AAE	/* async advance */
-		| INTR_SEE	/* system error */
-		| INTR_FRE	/* frame list rollover */
-		| INTR_PCE	/* port change detect */
-		| INTR_UEE	/* USB error interrupt */
-		| INTR_UE;	/* USB interrupt */
-	writel(usbintr, &dev->op_regs->usbintr);
-
-	/* clear stopped bit */
-	dev->stopped = 0;
-
-	/* set controller to run */
-	usbcmd = readl(&dev->op_regs->usbcmd);
-	usbcmd |= CMD_RUNSTOP;
-	writel(usbcmd, &dev->op_regs->usbcmd);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* disable interrupt and set controller to stop state */
-static void langwell_udc_stop(struct langwell_udc *dev)
-{
-	u32	usbcmd;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* disable all interrupts */
-	writel(0, &dev->op_regs->usbintr);
-
-	/* set stopped bit */
-	dev->stopped = 1;
-
-	/* set controller to stop state */
-	usbcmd = readl(&dev->op_regs->usbcmd);
-	usbcmd &= ~CMD_RUNSTOP;
-	writel(usbcmd, &dev->op_regs->usbcmd);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* stop all USB activities */
-static void stop_activity(struct langwell_udc *dev)
-{
-	struct langwell_ep	*ep;
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	nuke(&dev->ep[0], -ESHUTDOWN);
-
-	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
-		nuke(ep, -ESHUTDOWN);
-	}
-
-	/* report disconnect; the driver is already quiesced */
-	if (dev->driver) {
-		spin_unlock(&dev->lock);
-		dev->driver->disconnect(&dev->gadget);
-		spin_lock(&dev->lock);
-	}
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* device "function" sysfs attribute file */
-static ssize_t show_function(struct device *_dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct langwell_udc	*dev = dev_get_drvdata(_dev);
-
-	if (!dev->driver || !dev->driver->function
-			|| strlen(dev->driver->function) > PAGE_SIZE)
-		return 0;
-
-	return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function);
-}
-static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
-
-
-static inline enum usb_device_speed lpm_device_speed(u32 reg)
-{
-	switch (LPM_PSPD(reg)) {
-	case LPM_SPEED_HIGH:
-		return USB_SPEED_HIGH;
-	case LPM_SPEED_FULL:
-		return USB_SPEED_FULL;
-	case LPM_SPEED_LOW:
-		return USB_SPEED_LOW;
-	default:
-		return USB_SPEED_UNKNOWN;
-	}
-}
-
-/* device "langwell_udc" sysfs attribute file */
-static ssize_t show_langwell_udc(struct device *_dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct langwell_udc	*dev = dev_get_drvdata(_dev);
-	struct langwell_request *req;
-	struct langwell_ep	*ep = NULL;
-	char			*next;
-	unsigned		size;
-	unsigned		t;
-	unsigned		i;
-	unsigned long		flags;
-	u32			tmp_reg;
-
-	next = buf;
-	size = PAGE_SIZE;
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* driver basic information */
-	t = scnprintf(next, size,
-			DRIVER_DESC "\n"
-			"%s version: %s\n"
-			"Gadget driver: %s\n\n",
-			driver_name, DRIVER_VERSION,
-			dev->driver ? dev->driver->driver.name : "(none)");
-	size -= t;
-	next += t;
-
-	/* device registers */
-	tmp_reg = readl(&dev->op_regs->usbcmd);
-	t = scnprintf(next, size,
-			"USBCMD reg:\n"
-			"SetupTW: %d\n"
-			"Run/Stop: %s\n\n",
-			(tmp_reg & CMD_SUTW) ? 1 : 0,
-			(tmp_reg & CMD_RUNSTOP) ? "Run" : "Stop");
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->usbsts);
-	t = scnprintf(next, size,
-			"USB Status Reg:\n"
-			"Device Suspend: %d\n"
-			"Reset Received: %d\n"
-			"System Error: %s\n"
-			"USB Error Interrupt: %s\n\n",
-			(tmp_reg & STS_SLI) ? 1 : 0,
-			(tmp_reg & STS_URI) ? 1 : 0,
-			(tmp_reg & STS_SEI) ? "Error" : "No error",
-			(tmp_reg & STS_UEI) ? "Error detected" : "No error");
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->usbintr);
-	t = scnprintf(next, size,
-			"USB Intrrupt Enable Reg:\n"
-			"Sleep Enable: %d\n"
-			"SOF Received Enable: %d\n"
-			"Reset Enable: %d\n"
-			"System Error Enable: %d\n"
-			"Port Change Dectected Enable: %d\n"
-			"USB Error Intr Enable: %d\n"
-			"USB Intr Enable: %d\n\n",
-			(tmp_reg & INTR_SLE) ? 1 : 0,
-			(tmp_reg & INTR_SRE) ? 1 : 0,
-			(tmp_reg & INTR_URE) ? 1 : 0,
-			(tmp_reg & INTR_SEE) ? 1 : 0,
-			(tmp_reg & INTR_PCE) ? 1 : 0,
-			(tmp_reg & INTR_UEE) ? 1 : 0,
-			(tmp_reg & INTR_UE) ? 1 : 0);
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->frindex);
-	t = scnprintf(next, size,
-			"USB Frame Index Reg:\n"
-			"Frame Number is 0x%08x\n\n",
-			(tmp_reg & FRINDEX_MASK));
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->deviceaddr);
-	t = scnprintf(next, size,
-			"USB Device Address Reg:\n"
-			"Device Addr is 0x%x\n\n",
-			USBADR(tmp_reg));
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->endpointlistaddr);
-	t = scnprintf(next, size,
-			"USB Endpoint List Address Reg:\n"
-			"Endpoint List Pointer is 0x%x\n\n",
-			EPBASE(tmp_reg));
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->portsc1);
-	t = scnprintf(next, size,
-		"USB Port Status & Control Reg:\n"
-		"Port Reset: %s\n"
-		"Port Suspend Mode: %s\n"
-		"Over-current Change: %s\n"
-		"Port Enable/Disable Change: %s\n"
-		"Port Enabled/Disabled: %s\n"
-		"Current Connect Status: %s\n"
-		"LPM Suspend Status: %s\n\n",
-		(tmp_reg & PORTS_PR) ? "Reset" : "Not Reset",
-		(tmp_reg & PORTS_SUSP) ? "Suspend " : "Not Suspend",
-		(tmp_reg & PORTS_OCC) ? "Detected" : "No",
-		(tmp_reg & PORTS_PEC) ? "Changed" : "Not Changed",
-		(tmp_reg & PORTS_PE) ? "Enable" : "Not Correct",
-		(tmp_reg & PORTS_CCS) ?  "Attached" : "Not Attached",
-		(tmp_reg & PORTS_SLP) ? "LPM L1" : "LPM L0");
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->devlc);
-	t = scnprintf(next, size,
-		"Device LPM Control Reg:\n"
-		"Parallel Transceiver : %d\n"
-		"Serial Transceiver : %d\n"
-		"Port Speed: %s\n"
-		"Port Force Full Speed Connenct: %s\n"
-		"PHY Low Power Suspend Clock: %s\n"
-		"BmAttributes: %d\n\n",
-		LPM_PTS(tmp_reg),
-		(tmp_reg & LPM_STS) ? 1 : 0,
-		usb_speed_string(lpm_device_speed(tmp_reg)),
-		(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
-		(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
-		LPM_BA(tmp_reg));
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->usbmode);
-	t = scnprintf(next, size,
-			"USB Mode Reg:\n"
-			"Controller Mode is : %s\n\n", ({
-				char *s;
-				switch (MODE_CM(tmp_reg)) {
-				case MODE_IDLE:
-					s = "Idle"; break;
-				case MODE_DEVICE:
-					s = "Device Controller"; break;
-				case MODE_HOST:
-					s = "Host Controller"; break;
-				default:
-					s = "None"; break;
-				}
-				s;
-			}));
-	size -= t;
-	next += t;
-
-	tmp_reg = readl(&dev->op_regs->endptsetupstat);
-	t = scnprintf(next, size,
-			"Endpoint Setup Status Reg:\n"
-			"SETUP on ep 0x%04x\n\n",
-			tmp_reg & SETUPSTAT_MASK);
-	size -= t;
-	next += t;
-
-	for (i = 0; i < dev->ep_max / 2; i++) {
-		tmp_reg = readl(&dev->op_regs->endptctrl[i]);
-		t = scnprintf(next, size, "EP Ctrl Reg [%d]: 0x%08x\n",
-				i, tmp_reg);
-		size -= t;
-		next += t;
-	}
-	tmp_reg = readl(&dev->op_regs->endptprime);
-	t = scnprintf(next, size, "EP Prime Reg: 0x%08x\n\n", tmp_reg);
-	size -= t;
-	next += t;
-
-	/* langwell_udc, langwell_ep, langwell_request structure information */
-	ep = &dev->ep[0];
-	t = scnprintf(next, size, "%s MaxPacketSize: 0x%x, ep_num: %d\n",
-			ep->ep.name, ep->ep.maxpacket, ep->ep_num);
-	size -= t;
-	next += t;
-
-	if (list_empty(&ep->queue)) {
-		t = scnprintf(next, size, "its req queue is empty\n\n");
-		size -= t;
-		next += t;
-	} else {
-		list_for_each_entry(req, &ep->queue, queue) {
-			t = scnprintf(next, size,
-				"req %p actual 0x%x length 0x%x  buf %p\n",
-				&req->req, req->req.actual,
-				req->req.length, req->req.buf);
-			size -= t;
-			next += t;
-		}
-	}
-	/* other gadget->eplist ep */
-	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
-		if (ep->desc) {
-			t = scnprintf(next, size,
-					"\n%s MaxPacketSize: 0x%x, "
-					"ep_num: %d\n",
-					ep->ep.name, ep->ep.maxpacket,
-					ep->ep_num);
-			size -= t;
-			next += t;
-
-			if (list_empty(&ep->queue)) {
-				t = scnprintf(next, size,
-						"its req queue is empty\n\n");
-				size -= t;
-				next += t;
-			} else {
-				list_for_each_entry(req, &ep->queue, queue) {
-					t = scnprintf(next, size,
-						"req %p actual 0x%x length "
-						"0x%x  buf %p\n",
-						&req->req, req->req.actual,
-						req->req.length, req->req.buf);
-					size -= t;
-					next += t;
-				}
-			}
-		}
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-	return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
-
-
-/* device "remote_wakeup" sysfs attribute file */
-static ssize_t store_remote_wakeup(struct device *_dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct langwell_udc	*dev = dev_get_drvdata(_dev);
-	unsigned long		flags;
-	ssize_t			rc = count;
-
-	if (count > 2)
-		return -EINVAL;
-
-	if (count > 0 && buf[count-1] == '\n')
-		((char *) buf)[count-1] = 0;
-
-	if (buf[0] != '1')
-		return -EINVAL;
-
-	/* force remote wakeup enabled in case gadget driver doesn't support */
-	spin_lock_irqsave(&dev->lock, flags);
-	dev->remote_wakeup = 1;
-	dev->dev_status |= (1 << USB_DEVICE_REMOTE_WAKEUP);
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	langwell_wakeup(&dev->gadget);
-
-	return rc;
-}
-static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup);
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * when a driver is successfully registered, it will receive
- * control requests including set_configuration(), which enables
- * non-control requests.  then usb traffic follows until a
- * disconnect is reported.  then a host may connect again, or
- * the driver might get unbound.
- */
-
-static int langwell_start(struct usb_gadget *g,
-		struct usb_gadget_driver *driver)
-{
-	struct langwell_udc	*dev = gadget_to_langwell(g);
-	unsigned long		flags;
-	int			retval;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* hook up the driver ... */
-	driver->driver.bus = NULL;
-	dev->driver = driver;
-	dev->gadget.dev.driver = &driver->driver;
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	retval = device_create_file(&dev->pdev->dev, &dev_attr_function);
-	if (retval)
-		goto err;
-
-	dev->usb_state = USB_STATE_ATTACHED;
-	dev->ep0_state = WAIT_FOR_SETUP;
-	dev->ep0_dir = USB_DIR_OUT;
-
-	/* enable interrupt and set controller to run state */
-	if (dev->got_irq)
-		langwell_udc_start(dev);
-
-	dev_vdbg(&dev->pdev->dev,
-			"After langwell_udc_start(), print all registers:\n");
-	print_all_registers(dev);
-
-	dev_info(&dev->pdev->dev, "register driver: %s\n",
-			driver->driver.name);
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-	return 0;
-
-err:
-	dev->gadget.dev.driver = NULL;
-	dev->driver = NULL;
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-	return retval;
-}
-
-/* unregister gadget driver */
-static int langwell_stop(struct usb_gadget *g,
-		struct usb_gadget_driver *driver)
-{
-	struct langwell_udc	*dev = gadget_to_langwell(g);
-	unsigned long		flags;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* exit PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 0);
-
-	/* unbind OTG transceiver */
-	if (dev->transceiver)
-		(void)otg_set_peripheral(dev->transceiver->otg, 0);
-
-	/* disable interrupt and set controller to stop state */
-	langwell_udc_stop(dev);
-
-	dev->usb_state = USB_STATE_ATTACHED;
-	dev->ep0_state = WAIT_FOR_SETUP;
-	dev->ep0_dir = USB_DIR_OUT;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* stop all usb activities */
-	dev->gadget.speed = USB_SPEED_UNKNOWN;
-	dev->gadget.dev.driver = NULL;
-	dev->driver = NULL;
-	stop_activity(dev);
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	device_remove_file(&dev->pdev->dev, &dev_attr_function);
-
-	dev_info(&dev->pdev->dev, "unregistered driver '%s'\n",
-			driver->driver.name);
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * setup tripwire is used as a semaphore to ensure that the setup data
- * payload is extracted from a dQH without being corrupted
- */
-static void setup_tripwire(struct langwell_udc *dev)
-{
-	u32			usbcmd,
-				endptsetupstat;
-	unsigned long		timeout;
-	struct langwell_dqh	*dqh;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* ep0 OUT dQH */
-	dqh = &dev->ep_dqh[EP_DIR_OUT];
-
-	/* Write-Clear endptsetupstat */
-	endptsetupstat = readl(&dev->op_regs->endptsetupstat);
-	writel(endptsetupstat, &dev->op_regs->endptsetupstat);
-
-	/* wait until endptsetupstat is cleared */
-	timeout = jiffies + SETUPSTAT_TIMEOUT;
-	while (readl(&dev->op_regs->endptsetupstat)) {
-		if (time_after(jiffies, timeout)) {
-			dev_err(&dev->pdev->dev, "setup_tripwire timeout\n");
-			break;
-		}
-		cpu_relax();
-	}
-
-	/* while a hazard exists when setup packet arrives */
-	do {
-		/* set setup tripwire bit */
-		usbcmd = readl(&dev->op_regs->usbcmd);
-		writel(usbcmd | CMD_SUTW, &dev->op_regs->usbcmd);
-
-		/* copy the setup packet to local buffer */
-		memcpy(&dev->local_setup_buff, &dqh->dqh_setup, 8);
-	} while (!(readl(&dev->op_regs->usbcmd) & CMD_SUTW));
-
-	/* Write-Clear setup tripwire bit */
-	usbcmd = readl(&dev->op_regs->usbcmd);
-	writel(usbcmd & ~CMD_SUTW, &dev->op_regs->usbcmd);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* protocol ep0 stall, will automatically be cleared on new transaction */
-static void ep0_stall(struct langwell_udc *dev)
-{
-	u32	endptctrl;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* set TX and RX to stall */
-	endptctrl = readl(&dev->op_regs->endptctrl[0]);
-	endptctrl |= EPCTRL_TXS | EPCTRL_RXS;
-	writel(endptctrl, &dev->op_regs->endptctrl[0]);
-
-	/* update ep0 state */
-	dev->ep0_state = WAIT_FOR_SETUP;
-	dev->ep0_dir = USB_DIR_OUT;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* PRIME a status phase for ep0 */
-static int prime_status_phase(struct langwell_udc *dev, int dir)
-{
-	struct langwell_request	*req;
-	struct langwell_ep	*ep;
-	int			status = 0;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (dir == EP_DIR_IN)
-		dev->ep0_dir = USB_DIR_IN;
-	else
-		dev->ep0_dir = USB_DIR_OUT;
-
-	ep = &dev->ep[0];
-	dev->ep0_state = WAIT_FOR_OUT_STATUS;
-
-	req = dev->status_req;
-
-	req->ep = ep;
-	req->req.length = 0;
-	req->req.status = -EINPROGRESS;
-	req->req.actual = 0;
-	req->req.complete = NULL;
-	req->dtd_count = 0;
-
-	if (!req_to_dtd(req))
-		status = queue_dtd(ep, req);
-	else
-		return -ENOMEM;
-
-	if (status)
-		dev_err(&dev->pdev->dev, "can't queue ep0 status request\n");
-
-	list_add_tail(&req->queue, &ep->queue);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return status;
-}
-
-
-/* SET_ADDRESS request routine */
-static void set_address(struct langwell_udc *dev, u16 value,
-		u16 index, u16 length)
-{
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* save the new address to device struct */
-	dev->dev_addr = (u8) value;
-	dev_vdbg(&dev->pdev->dev, "dev->dev_addr = %d\n", dev->dev_addr);
-
-	/* update usb state */
-	dev->usb_state = USB_STATE_ADDRESS;
-
-	/* STATUS phase */
-	if (prime_status_phase(dev, EP_DIR_IN))
-		ep0_stall(dev);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* return endpoint by windex */
-static struct langwell_ep *get_ep_by_windex(struct langwell_udc *dev,
-		u16 wIndex)
-{
-	struct langwell_ep		*ep;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
-		return &dev->ep[0];
-
-	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
-		u8	bEndpointAddress;
-		if (!ep->desc)
-			continue;
-
-		bEndpointAddress = ep->desc->bEndpointAddress;
-		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
-			continue;
-
-		if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
-			== (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
-			return ep;
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return NULL;
-}
-
-
-/* return whether endpoint is stalled, 0: not stalled; 1: stalled */
-static int ep_is_stall(struct langwell_ep *ep)
-{
-	struct langwell_udc	*dev = ep->dev;
-	u32			endptctrl;
-	int			retval;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	endptctrl = readl(&dev->op_regs->endptctrl[ep->ep_num]);
-	if (is_in(ep))
-		retval = endptctrl & EPCTRL_TXS ? 1 : 0;
-	else
-		retval = endptctrl & EPCTRL_RXS ? 1 : 0;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return retval;
-}
-
-
-/* GET_STATUS request routine */
-static void get_status(struct langwell_udc *dev, u8 request_type, u16 value,
-		u16 index, u16 length)
-{
-	struct langwell_request	*req;
-	struct langwell_ep	*ep;
-	u16	status_data = 0;	/* 16 bits cpu view status data */
-	int	status = 0;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	ep = &dev->ep[0];
-
-	if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
-		/* get device status */
-		status_data = dev->dev_status;
-	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
-		/* get interface status */
-		status_data = 0;
-	} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
-		/* get endpoint status */
-		struct langwell_ep	*epn;
-		epn = get_ep_by_windex(dev, index);
-		/* stall if endpoint doesn't exist */
-		if (!epn)
-			goto stall;
-
-		status_data = ep_is_stall(epn) << USB_ENDPOINT_HALT;
-	}
-
-	dev_dbg(&dev->pdev->dev, "get status data: 0x%04x\n", status_data);
-
-	dev->ep0_dir = USB_DIR_IN;
-
-	/* borrow the per device status_req */
-	req = dev->status_req;
-
-	/* fill in the reqest structure */
-	*((u16 *) req->req.buf) = cpu_to_le16(status_data);
-	req->ep = ep;
-	req->req.length = 2;
-	req->req.status = -EINPROGRESS;
-	req->req.actual = 0;
-	req->req.complete = NULL;
-	req->dtd_count = 0;
-
-	/* prime the data phase */
-	if (!req_to_dtd(req))
-		status = queue_dtd(ep, req);
-	else			/* no mem */
-		goto stall;
-
-	if (status) {
-		dev_err(&dev->pdev->dev,
-				"response error on GET_STATUS request\n");
-		goto stall;
-	}
-
-	list_add_tail(&req->queue, &ep->queue);
-	dev->ep0_state = DATA_STATE_XMIT;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return;
-stall:
-	ep0_stall(dev);
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* setup packet interrupt handler */
-static void handle_setup_packet(struct langwell_udc *dev,
-		struct usb_ctrlrequest *setup)
-{
-	u16	wValue = le16_to_cpu(setup->wValue);
-	u16	wIndex = le16_to_cpu(setup->wIndex);
-	u16	wLength = le16_to_cpu(setup->wLength);
-	u32	portsc1;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* ep0 fifo flush */
-	nuke(&dev->ep[0], -ESHUTDOWN);
-
-	dev_dbg(&dev->pdev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
-			setup->bRequestType, setup->bRequest,
-			wValue, wIndex, wLength);
-
-	/* RNDIS gadget delegate */
-	if ((setup->bRequestType == 0x21) && (setup->bRequest == 0x00)) {
-		/* USB_CDC_SEND_ENCAPSULATED_COMMAND */
-		goto delegate;
-	}
-
-	/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
-	if ((setup->bRequestType == 0xa1) && (setup->bRequest == 0x01)) {
-		/* USB_CDC_GET_ENCAPSULATED_RESPONSE */
-		goto delegate;
-	}
-
-	/* We process some stardard setup requests here */
-	switch (setup->bRequest) {
-	case USB_REQ_GET_STATUS:
-		dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_GET_STATUS\n");
-		/* get status, DATA and STATUS phase */
-		if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
-					!= (USB_DIR_IN | USB_TYPE_STANDARD))
-			break;
-		get_status(dev, setup->bRequestType, wValue, wIndex, wLength);
-		goto end;
-
-	case USB_REQ_SET_ADDRESS:
-		dev_dbg(&dev->pdev->dev, "SETUP: USB_REQ_SET_ADDRESS\n");
-		/* STATUS phase */
-		if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
-						| USB_RECIP_DEVICE))
-			break;
-		set_address(dev, wValue, wIndex, wLength);
-		goto end;
-
-	case USB_REQ_CLEAR_FEATURE:
-	case USB_REQ_SET_FEATURE:
-		/* STATUS phase */
-	{
-		int rc = -EOPNOTSUPP;
-		if (setup->bRequest == USB_REQ_SET_FEATURE)
-			dev_dbg(&dev->pdev->dev,
-					"SETUP: USB_REQ_SET_FEATURE\n");
-		else if (setup->bRequest == USB_REQ_CLEAR_FEATURE)
-			dev_dbg(&dev->pdev->dev,
-					"SETUP: USB_REQ_CLEAR_FEATURE\n");
-
-		if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
-				== (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
-			struct langwell_ep	*epn;
-			epn = get_ep_by_windex(dev, wIndex);
-			/* stall if endpoint doesn't exist */
-			if (!epn) {
-				ep0_stall(dev);
-				goto end;
-			}
-
-			if (wValue != 0 || wLength != 0
-					|| epn->ep_num > dev->ep_max)
-				break;
-
-			spin_unlock(&dev->lock);
-			rc = langwell_ep_set_halt(&epn->ep,
-				(setup->bRequest == USB_REQ_SET_FEATURE)
-				? 1 : 0);
-			spin_lock(&dev->lock);
-
-		} else if ((setup->bRequestType & (USB_RECIP_MASK
-				| USB_TYPE_MASK)) == (USB_RECIP_DEVICE
-				| USB_TYPE_STANDARD)) {
-			rc = 0;
-			switch (wValue) {
-			case USB_DEVICE_REMOTE_WAKEUP:
-				if (setup->bRequest == USB_REQ_SET_FEATURE) {
-					dev->remote_wakeup = 1;
-					dev->dev_status |= (1 << wValue);
-				} else {
-					dev->remote_wakeup = 0;
-					dev->dev_status &= ~(1 << wValue);
-				}
-				break;
-			case USB_DEVICE_TEST_MODE:
-				dev_dbg(&dev->pdev->dev, "SETUP: TEST MODE\n");
-				if ((wIndex & 0xff) ||
-					(dev->gadget.speed != USB_SPEED_HIGH))
-					ep0_stall(dev);
-
-				switch (wIndex >> 8) {
-				case TEST_J:
-				case TEST_K:
-				case TEST_SE0_NAK:
-				case TEST_PACKET:
-				case TEST_FORCE_EN:
-					if (prime_status_phase(dev, EP_DIR_IN))
-						ep0_stall(dev);
-					portsc1 = readl(&dev->op_regs->portsc1);
-					portsc1 |= (wIndex & 0xf00) << 8;
-					writel(portsc1, &dev->op_regs->portsc1);
-					goto end;
-				default:
-					rc = -EOPNOTSUPP;
-				}
-				break;
-			default:
-				rc = -EOPNOTSUPP;
-				break;
-			}
-
-			if (!gadget_is_otg(&dev->gadget))
-				break;
-			else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
-				dev->gadget.b_hnp_enable = 1;
-			else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
-				dev->gadget.a_hnp_support = 1;
-			else if (setup->bRequest ==
-					USB_DEVICE_A_ALT_HNP_SUPPORT)
-				dev->gadget.a_alt_hnp_support = 1;
-			else
-				break;
-		} else
-			break;
-
-		if (rc == 0) {
-			if (prime_status_phase(dev, EP_DIR_IN))
-				ep0_stall(dev);
-		}
-		goto end;
-	}
-
-	case USB_REQ_GET_DESCRIPTOR:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_GET_DESCRIPTOR\n");
-		goto delegate;
-
-	case USB_REQ_SET_DESCRIPTOR:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_SET_DESCRIPTOR unsupported\n");
-		goto delegate;
-
-	case USB_REQ_GET_CONFIGURATION:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_GET_CONFIGURATION\n");
-		goto delegate;
-
-	case USB_REQ_SET_CONFIGURATION:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_SET_CONFIGURATION\n");
-		goto delegate;
-
-	case USB_REQ_GET_INTERFACE:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_GET_INTERFACE\n");
-		goto delegate;
-
-	case USB_REQ_SET_INTERFACE:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_SET_INTERFACE\n");
-		goto delegate;
-
-	case USB_REQ_SYNCH_FRAME:
-		dev_dbg(&dev->pdev->dev,
-				"SETUP: USB_REQ_SYNCH_FRAME unsupported\n");
-		goto delegate;
-
-	default:
-		/* delegate USB standard requests to the gadget driver */
-		goto delegate;
-delegate:
-		/* USB requests handled by gadget */
-		if (wLength) {
-			/* DATA phase from gadget, STATUS phase from udc */
-			dev->ep0_dir = (setup->bRequestType & USB_DIR_IN)
-					?  USB_DIR_IN : USB_DIR_OUT;
-			dev_vdbg(&dev->pdev->dev,
-					"dev->ep0_dir = 0x%x, wLength = %d\n",
-					dev->ep0_dir, wLength);
-			spin_unlock(&dev->lock);
-			if (dev->driver->setup(&dev->gadget,
-					&dev->local_setup_buff) < 0)
-				ep0_stall(dev);
-			spin_lock(&dev->lock);
-			dev->ep0_state = (setup->bRequestType & USB_DIR_IN)
-					?  DATA_STATE_XMIT : DATA_STATE_RECV;
-		} else {
-			/* no DATA phase, IN STATUS phase from gadget */
-			dev->ep0_dir = USB_DIR_IN;
-			dev_vdbg(&dev->pdev->dev,
-					"dev->ep0_dir = 0x%x, wLength = %d\n",
-					dev->ep0_dir, wLength);
-			spin_unlock(&dev->lock);
-			if (dev->driver->setup(&dev->gadget,
-					&dev->local_setup_buff) < 0)
-				ep0_stall(dev);
-			spin_lock(&dev->lock);
-			dev->ep0_state = WAIT_FOR_OUT_STATUS;
-		}
-		break;
-	}
-end:
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* transfer completion, process endpoint request and free the completed dTDs
- * for this request
- */
-static int process_ep_req(struct langwell_udc *dev, int index,
-		struct langwell_request *curr_req)
-{
-	struct langwell_dtd	*curr_dtd;
-	struct langwell_dqh	*curr_dqh;
-	int			td_complete, actual, remaining_length;
-	int			i, dir;
-	u8			dtd_status = 0;
-	int			retval = 0;
-
-	curr_dqh = &dev->ep_dqh[index];
-	dir = index % 2;
-
-	curr_dtd = curr_req->head;
-	td_complete = 0;
-	actual = curr_req->req.length;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	for (i = 0; i < curr_req->dtd_count; i++) {
-
-		/* command execution states by dTD */
-		dtd_status = curr_dtd->dtd_status;
-
-		barrier();
-		remaining_length = le16_to_cpu(curr_dtd->dtd_total);
-		actual -= remaining_length;
-
-		if (!dtd_status) {
-			/* transfers completed successfully */
-			if (!remaining_length) {
-				td_complete++;
-				dev_vdbg(&dev->pdev->dev,
-					"dTD transmitted successfully\n");
-			} else {
-				if (dir) {
-					dev_vdbg(&dev->pdev->dev,
-						"TX dTD remains data\n");
-					retval = -EPROTO;
-					break;
-
-				} else {
-					td_complete++;
-					break;
-				}
-			}
-		} else {
-			/* transfers completed with errors */
-			if (dtd_status & DTD_STS_ACTIVE) {
-				dev_dbg(&dev->pdev->dev,
-					"dTD status ACTIVE dQH[%d]\n", index);
-				retval = 1;
-				return retval;
-			} else if (dtd_status & DTD_STS_HALTED) {
-				dev_err(&dev->pdev->dev,
-					"dTD error %08x dQH[%d]\n",
-					dtd_status, index);
-				/* clear the errors and halt condition */
-				curr_dqh->dtd_status = 0;
-				retval = -EPIPE;
-				break;
-			} else if (dtd_status & DTD_STS_DBE) {
-				dev_dbg(&dev->pdev->dev,
-					"data buffer (overflow) error\n");
-				retval = -EPROTO;
-				break;
-			} else if (dtd_status & DTD_STS_TRE) {
-				dev_dbg(&dev->pdev->dev,
-					"transaction(ISO) error\n");
-				retval = -EILSEQ;
-				break;
-			} else
-				dev_err(&dev->pdev->dev,
-					"unknown error (0x%x)!\n",
-					dtd_status);
-		}
-
-		if (i != curr_req->dtd_count - 1)
-			curr_dtd = (struct langwell_dtd *)
-				curr_dtd->next_dtd_virt;
-	}
-
-	if (retval)
-		return retval;
-
-	curr_req->req.actual = actual;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* complete DATA or STATUS phase of ep0 prime status phase if needed */
-static void ep0_req_complete(struct langwell_udc *dev,
-		struct langwell_ep *ep0, struct langwell_request *req)
-{
-	u32	new_addr;
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (dev->usb_state == USB_STATE_ADDRESS) {
-		/* set the new address */
-		new_addr = (u32)dev->dev_addr;
-		writel(new_addr << USBADR_SHIFT, &dev->op_regs->deviceaddr);
-
-		new_addr = USBADR(readl(&dev->op_regs->deviceaddr));
-		dev_vdbg(&dev->pdev->dev, "new_addr = %d\n", new_addr);
-	}
-
-	done(ep0, req, 0);
-
-	switch (dev->ep0_state) {
-	case DATA_STATE_XMIT:
-		/* receive status phase */
-		if (prime_status_phase(dev, EP_DIR_OUT))
-			ep0_stall(dev);
-		break;
-	case DATA_STATE_RECV:
-		/* send status phase */
-		if (prime_status_phase(dev, EP_DIR_IN))
-			ep0_stall(dev);
-		break;
-	case WAIT_FOR_OUT_STATUS:
-		dev->ep0_state = WAIT_FOR_SETUP;
-		break;
-	case WAIT_FOR_SETUP:
-		dev_err(&dev->pdev->dev, "unexpect ep0 packets\n");
-		break;
-	default:
-		ep0_stall(dev);
-		break;
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB transfer completion interrupt */
-static void handle_trans_complete(struct langwell_udc *dev)
-{
-	u32			complete_bits;
-	int			i, ep_num, dir, bit_mask, status;
-	struct langwell_ep	*epn;
-	struct langwell_request	*curr_req, *temp_req;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	complete_bits = readl(&dev->op_regs->endptcomplete);
-	dev_vdbg(&dev->pdev->dev, "endptcomplete register: 0x%08x\n",
-			complete_bits);
-
-	/* Write-Clear the bits in endptcomplete register */
-	writel(complete_bits, &dev->op_regs->endptcomplete);
-
-	if (!complete_bits) {
-		dev_dbg(&dev->pdev->dev, "complete_bits = 0\n");
-		goto done;
-	}
-
-	for (i = 0; i < dev->ep_max; i++) {
-		ep_num = i / 2;
-		dir = i % 2;
-
-		bit_mask = 1 << (ep_num + 16 * dir);
-
-		if (!(complete_bits & bit_mask))
-			continue;
-
-		/* ep0 */
-		if (i == 1)
-			epn = &dev->ep[0];
-		else
-			epn = &dev->ep[i];
-
-		if (epn->name == NULL) {
-			dev_warn(&dev->pdev->dev, "invalid endpoint\n");
-			continue;
-		}
-
-		if (i < 2)
-			/* ep0 in and out */
-			dev_dbg(&dev->pdev->dev, "%s-%s transfer completed\n",
-					epn->name,
-					is_in(epn) ? "in" : "out");
-		else
-			dev_dbg(&dev->pdev->dev, "%s transfer completed\n",
-					epn->name);
-
-		/* process the req queue until an uncomplete request */
-		list_for_each_entry_safe(curr_req, temp_req,
-				&epn->queue, queue) {
-			status = process_ep_req(dev, i, curr_req);
-			dev_vdbg(&dev->pdev->dev, "%s req status: %d\n",
-					epn->name, status);
-
-			if (status)
-				break;
-
-			/* write back status to req */
-			curr_req->req.status = status;
-
-			/* ep0 request completion */
-			if (ep_num == 0) {
-				ep0_req_complete(dev, epn, curr_req);
-				break;
-			} else {
-				done(epn, curr_req, status);
-			}
-		}
-	}
-done:
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-/* port change detect interrupt handler */
-static void handle_port_change(struct langwell_udc *dev)
-{
-	u32	portsc1, devlc;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (dev->bus_reset)
-		dev->bus_reset = 0;
-
-	portsc1 = readl(&dev->op_regs->portsc1);
-	devlc = readl(&dev->op_regs->devlc);
-	dev_vdbg(&dev->pdev->dev, "portsc1 = 0x%08x, devlc = 0x%08x\n",
-			portsc1, devlc);
-
-	/* bus reset is finished */
-	if (!(portsc1 & PORTS_PR)) {
-		/* get the speed */
-		dev->gadget.speed = lpm_device_speed(devlc);
-		dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
-			dev->gadget.speed);
-	}
-
-	/* LPM L0 to L1 */
-	if (dev->lpm && dev->lpm_state == LPM_L0)
-		if (portsc1 & PORTS_SUSP && portsc1 & PORTS_SLP) {
-			dev_info(&dev->pdev->dev, "LPM L0 to L1\n");
-			dev->lpm_state = LPM_L1;
-		}
-
-	/* LPM L1 to L0, force resume or remote wakeup finished */
-	if (dev->lpm && dev->lpm_state == LPM_L1)
-		if (!(portsc1 & PORTS_SUSP)) {
-			dev_info(&dev->pdev->dev, "LPM L1 to L0\n");
-			dev->lpm_state = LPM_L0;
-		}
-
-	/* update USB state */
-	if (!dev->resume_state)
-		dev->usb_state = USB_STATE_DEFAULT;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB reset interrupt handler */
-static void handle_usb_reset(struct langwell_udc *dev)
-{
-	u32		deviceaddr,
-			endptsetupstat,
-			endptcomplete;
-	unsigned long	timeout;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* Write-Clear the device address */
-	deviceaddr = readl(&dev->op_regs->deviceaddr);
-	writel(deviceaddr & ~USBADR_MASK, &dev->op_regs->deviceaddr);
-
-	dev->dev_addr = 0;
-
-	/* clear usb state */
-	dev->resume_state = 0;
-
-	/* LPM L1 to L0, reset */
-	if (dev->lpm)
-		dev->lpm_state = LPM_L0;
-
-	dev->ep0_dir = USB_DIR_OUT;
-	dev->ep0_state = WAIT_FOR_SETUP;
-
-	/* remote wakeup reset to 0 when the device is reset */
-	dev->remote_wakeup = 0;
-	dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
-	dev->gadget.b_hnp_enable = 0;
-	dev->gadget.a_hnp_support = 0;
-	dev->gadget.a_alt_hnp_support = 0;
-
-	/* Write-Clear all the setup token semaphores */
-	endptsetupstat = readl(&dev->op_regs->endptsetupstat);
-	writel(endptsetupstat, &dev->op_regs->endptsetupstat);
-
-	/* Write-Clear all the endpoint complete status bits */
-	endptcomplete = readl(&dev->op_regs->endptcomplete);
-	writel(endptcomplete, &dev->op_regs->endptcomplete);
-
-	/* wait until all endptprime bits cleared */
-	timeout = jiffies + PRIME_TIMEOUT;
-	while (readl(&dev->op_regs->endptprime)) {
-		if (time_after(jiffies, timeout)) {
-			dev_err(&dev->pdev->dev, "USB reset timeout\n");
-			break;
-		}
-		cpu_relax();
-	}
-
-	/* write 1s to endptflush register to clear any primed buffers */
-	writel((u32) ~0, &dev->op_regs->endptflush);
-
-	if (readl(&dev->op_regs->portsc1) & PORTS_PR) {
-		dev_vdbg(&dev->pdev->dev, "USB bus reset\n");
-		/* bus is reseting */
-		dev->bus_reset = 1;
-
-		/* reset all the queues, stop all USB activities */
-		stop_activity(dev);
-		dev->usb_state = USB_STATE_DEFAULT;
-	} else {
-		dev_vdbg(&dev->pdev->dev, "device controller reset\n");
-		/* controller reset */
-		langwell_udc_reset(dev);
-
-		/* reset all the queues, stop all USB activities */
-		stop_activity(dev);
-
-		/* reset ep0 dQH and endptctrl */
-		ep0_reset(dev);
-
-		/* enable interrupt and set controller to run state */
-		langwell_udc_start(dev);
-
-		dev->usb_state = USB_STATE_ATTACHED;
-	}
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB bus suspend/resume interrupt */
-static void handle_bus_suspend(struct langwell_udc *dev)
-{
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	dev->resume_state = dev->usb_state;
-	dev->usb_state = USB_STATE_SUSPENDED;
-
-	/* report suspend to the driver */
-	if (dev->driver) {
-		if (dev->driver->suspend) {
-			spin_unlock(&dev->lock);
-			dev->driver->suspend(&dev->gadget);
-			spin_lock(&dev->lock);
-			dev_dbg(&dev->pdev->dev, "suspend %s\n",
-					dev->driver->driver.name);
-		}
-	}
-
-	/* enter PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 0);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-static void handle_bus_resume(struct langwell_udc *dev)
-{
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	dev->usb_state = dev->resume_state;
-	dev->resume_state = 0;
-
-	/* exit PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 0);
-
-	/* report resume to the driver */
-	if (dev->driver) {
-		if (dev->driver->resume) {
-			spin_unlock(&dev->lock);
-			dev->driver->resume(&dev->gadget);
-			spin_lock(&dev->lock);
-			dev_dbg(&dev->pdev->dev, "resume %s\n",
-					dev->driver->driver.name);
-		}
-	}
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* USB device controller interrupt handler */
-static irqreturn_t langwell_irq(int irq, void *_dev)
-{
-	struct langwell_udc	*dev = _dev;
-	u32			usbsts,
-				usbintr,
-				irq_sts,
-				portsc1;
-
-	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	if (dev->stopped) {
-		dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
-		dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		return IRQ_NONE;
-	}
-
-	spin_lock(&dev->lock);
-
-	/* USB status */
-	usbsts = readl(&dev->op_regs->usbsts);
-
-	/* USB interrupt enable */
-	usbintr = readl(&dev->op_regs->usbintr);
-
-	irq_sts = usbsts & usbintr;
-	dev_vdbg(&dev->pdev->dev,
-			"usbsts = 0x%08x, usbintr = 0x%08x, irq_sts = 0x%08x\n",
-			usbsts, usbintr, irq_sts);
-
-	if (!irq_sts) {
-		dev_vdbg(&dev->pdev->dev, "handle IRQ_NONE\n");
-		dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		spin_unlock(&dev->lock);
-		return IRQ_NONE;
-	}
-
-	/* Write-Clear interrupt status bits */
-	writel(irq_sts, &dev->op_regs->usbsts);
-
-	/* resume from suspend */
-	portsc1 = readl(&dev->op_regs->portsc1);
-	if (dev->usb_state == USB_STATE_SUSPENDED)
-		if (!(portsc1 & PORTS_SUSP))
-			handle_bus_resume(dev);
-
-	/* USB interrupt */
-	if (irq_sts & STS_UI) {
-		dev_vdbg(&dev->pdev->dev, "USB interrupt\n");
-
-		/* setup packet received from ep0 */
-		if (readl(&dev->op_regs->endptsetupstat)
-				& EP0SETUPSTAT_MASK) {
-			dev_vdbg(&dev->pdev->dev,
-				"USB SETUP packet received interrupt\n");
-			/* setup tripwire semaphone */
-			setup_tripwire(dev);
-			handle_setup_packet(dev, &dev->local_setup_buff);
-		}
-
-		/* USB transfer completion */
-		if (readl(&dev->op_regs->endptcomplete)) {
-			dev_vdbg(&dev->pdev->dev,
-				"USB transfer completion interrupt\n");
-			handle_trans_complete(dev);
-		}
-	}
-
-	/* SOF received interrupt (for ISO transfer) */
-	if (irq_sts & STS_SRI) {
-		/* FIXME */
-		/* dev_vdbg(&dev->pdev->dev, "SOF received interrupt\n"); */
-	}
-
-	/* port change detect interrupt */
-	if (irq_sts & STS_PCI) {
-		dev_vdbg(&dev->pdev->dev, "port change detect interrupt\n");
-		handle_port_change(dev);
-	}
-
-	/* suspend interrupt */
-	if (irq_sts & STS_SLI) {
-		dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
-		handle_bus_suspend(dev);
-	}
-
-	/* USB reset interrupt */
-	if (irq_sts & STS_URI) {
-		dev_vdbg(&dev->pdev->dev, "USB reset interrupt\n");
-		handle_usb_reset(dev);
-	}
-
-	/* USB error or system error interrupt */
-	if (irq_sts & (STS_UEI | STS_SEI)) {
-		/* FIXME */
-		dev_warn(&dev->pdev->dev, "error IRQ, irq_sts: %x\n", irq_sts);
-	}
-
-	spin_unlock(&dev->lock);
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return IRQ_HANDLED;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* release device structure */
-static void gadget_release(struct device *_dev)
-{
-	struct langwell_udc	*dev = dev_get_drvdata(_dev);
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	complete(dev->done);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	kfree(dev);
-}
-
-
-/* enable SRAM caching if SRAM detected */
-static void sram_init(struct langwell_udc *dev)
-{
-	struct pci_dev		*pdev = dev->pdev;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	dev->sram_addr = pci_resource_start(pdev, 1);
-	dev->sram_size = pci_resource_len(pdev, 1);
-	dev_info(&dev->pdev->dev, "Found private SRAM at %x size:%x\n",
-			dev->sram_addr, dev->sram_size);
-	dev->got_sram = 1;
-
-	if (pci_request_region(pdev, 1, kobject_name(&pdev->dev.kobj))) {
-		dev_warn(&dev->pdev->dev, "SRAM request failed\n");
-		dev->got_sram = 0;
-	} else if (!dma_declare_coherent_memory(&pdev->dev, dev->sram_addr,
-			dev->sram_addr, dev->sram_size, DMA_MEMORY_MAP)) {
-		dev_warn(&dev->pdev->dev, "SRAM DMA declare failed\n");
-		pci_release_region(pdev, 1);
-		dev->got_sram = 0;
-	}
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* release SRAM caching */
-static void sram_deinit(struct langwell_udc *dev)
-{
-	struct pci_dev *pdev = dev->pdev;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	dma_release_declared_memory(&pdev->dev);
-	pci_release_region(pdev, 1);
-
-	dev->got_sram = 0;
-
-	dev_info(&dev->pdev->dev, "release SRAM caching\n");
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-
-/* tear down the binding between this driver and the pci device */
-static void langwell_udc_remove(struct pci_dev *pdev)
-{
-	struct langwell_udc	*dev = pci_get_drvdata(pdev);
-
-	DECLARE_COMPLETION(done);
-
-	BUG_ON(dev->driver);
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	dev->done = &done;
-
-	/* free dTD dma_pool and dQH */
-	if (dev->dtd_pool)
-		dma_pool_destroy(dev->dtd_pool);
-
-	if (dev->ep_dqh)
-		dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
-			dev->ep_dqh, dev->ep_dqh_dma);
-
-	/* release SRAM caching */
-	if (dev->has_sram && dev->got_sram)
-		sram_deinit(dev);
-
-	if (dev->status_req) {
-		kfree(dev->status_req->req.buf);
-		kfree(dev->status_req);
-	}
-
-	kfree(dev->ep);
-
-	/* disable IRQ handler */
-	if (dev->got_irq)
-		free_irq(pdev->irq, dev);
-
-	if (dev->cap_regs)
-		iounmap(dev->cap_regs);
-
-	if (dev->region)
-		release_mem_region(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0));
-
-	if (dev->enabled)
-		pci_disable_device(pdev);
-
-	dev->cap_regs = NULL;
-
-	dev_info(&dev->pdev->dev, "unbind\n");
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-
-	device_unregister(&dev->gadget.dev);
-	device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
-	device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
-
-	pci_set_drvdata(pdev, NULL);
-
-	/* free dev, wait for the release() finished */
-	wait_for_completion(&done);
-}
-
-
-/*
- * wrap this driver around the specified device, but
- * don't respond over USB until a gadget driver binds to us.
- */
-static int langwell_udc_probe(struct pci_dev *pdev,
-		const struct pci_device_id *id)
-{
-	struct langwell_udc	*dev;
-	unsigned long		resource, len;
-	void			__iomem *base = NULL;
-	size_t			size;
-	int			retval;
-
-	/* alloc, and start init */
-	dev = kzalloc(sizeof *dev, GFP_KERNEL);
-	if (dev == NULL) {
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	/* initialize device spinlock */
-	spin_lock_init(&dev->lock);
-
-	dev->pdev = pdev;
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	pci_set_drvdata(pdev, dev);
-
-	/* now all the pci goodies ... */
-	if (pci_enable_device(pdev) < 0) {
-		retval = -ENODEV;
-		goto error;
-	}
-	dev->enabled = 1;
-
-	/* control register: BAR 0 */
-	resource = pci_resource_start(pdev, 0);
-	len = pci_resource_len(pdev, 0);
-	if (!request_mem_region(resource, len, driver_name)) {
-		dev_err(&dev->pdev->dev, "controller already in use\n");
-		retval = -EBUSY;
-		goto error;
-	}
-	dev->region = 1;
-
-	base = ioremap_nocache(resource, len);
-	if (base == NULL) {
-		dev_err(&dev->pdev->dev, "can't map memory\n");
-		retval = -EFAULT;
-		goto error;
-	}
-
-	dev->cap_regs = (struct langwell_cap_regs __iomem *) base;
-	dev_vdbg(&dev->pdev->dev, "dev->cap_regs: %p\n", dev->cap_regs);
-	dev->op_regs = (struct langwell_op_regs __iomem *)
-		(base + OP_REG_OFFSET);
-	dev_vdbg(&dev->pdev->dev, "dev->op_regs: %p\n", dev->op_regs);
-
-	/* irq setup after old hardware is cleaned up */
-	if (!pdev->irq) {
-		dev_err(&dev->pdev->dev, "No IRQ. Check PCI setup!\n");
-		retval = -ENODEV;
-		goto error;
-	}
-
-	dev->has_sram = 1;
-	dev->got_sram = 0;
-	dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram);
-
-	/* enable SRAM caching if detected */
-	if (dev->has_sram && !dev->got_sram)
-		sram_init(dev);
-
-	dev_info(&dev->pdev->dev,
-			"irq %d, io mem: 0x%08lx, len: 0x%08lx, pci mem 0x%p\n",
-			pdev->irq, resource, len, base);
-	/* enables bus-mastering for device dev */
-	pci_set_master(pdev);
-
-	if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
-				driver_name, dev) != 0) {
-		dev_err(&dev->pdev->dev,
-				"request interrupt %d failed\n", pdev->irq);
-		retval = -EBUSY;
-		goto error;
-	}
-	dev->got_irq = 1;
-
-	/* set stopped bit */
-	dev->stopped = 1;
-
-	/* capabilities and endpoint number */
-	dev->lpm = (readl(&dev->cap_regs->hccparams) & HCC_LEN) ? 1 : 0;
-	dev->dciversion = readw(&dev->cap_regs->dciversion);
-	dev->devcap = (readl(&dev->cap_regs->dccparams) & DEVCAP) ? 1 : 0;
-	dev_vdbg(&dev->pdev->dev, "dev->lpm: %d\n", dev->lpm);
-	dev_vdbg(&dev->pdev->dev, "dev->dciversion: 0x%04x\n",
-			dev->dciversion);
-	dev_vdbg(&dev->pdev->dev, "dccparams: 0x%08x\n",
-			readl(&dev->cap_regs->dccparams));
-	dev_vdbg(&dev->pdev->dev, "dev->devcap: %d\n", dev->devcap);
-	if (!dev->devcap) {
-		dev_err(&dev->pdev->dev, "can't support device mode\n");
-		retval = -ENODEV;
-		goto error;
-	}
-
-	/* a pair of endpoints (out/in) for each address */
-	dev->ep_max = DEN(readl(&dev->cap_regs->dccparams)) * 2;
-	dev_vdbg(&dev->pdev->dev, "dev->ep_max: %d\n", dev->ep_max);
-
-	/* allocate endpoints memory */
-	dev->ep = kzalloc(sizeof(struct langwell_ep) * dev->ep_max,
-			GFP_KERNEL);
-	if (!dev->ep) {
-		dev_err(&dev->pdev->dev, "allocate endpoints memory failed\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	/* allocate device dQH memory */
-	size = dev->ep_max * sizeof(struct langwell_dqh);
-	dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
-	if (size < DQH_ALIGNMENT)
-		size = DQH_ALIGNMENT;
-	else if ((size % DQH_ALIGNMENT) != 0) {
-		size += DQH_ALIGNMENT + 1;
-		size &= ~(DQH_ALIGNMENT - 1);
-	}
-	dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
-					&dev->ep_dqh_dma, GFP_KERNEL);
-	if (!dev->ep_dqh) {
-		dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-	dev->ep_dqh_size = size;
-	dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
-
-	/* initialize ep0 status request structure */
-	dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
-	if (!dev->status_req) {
-		dev_err(&dev->pdev->dev,
-				"allocate status_req memory failed\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-	INIT_LIST_HEAD(&dev->status_req->queue);
-
-	/* allocate a small amount of memory to get valid address */
-	dev->status_req->req.buf = kmalloc(8, GFP_KERNEL);
-	dev->status_req->req.dma = virt_to_phys(dev->status_req->req.buf);
-
-	dev->resume_state = USB_STATE_NOTATTACHED;
-	dev->usb_state = USB_STATE_POWERED;
-	dev->ep0_dir = USB_DIR_OUT;
-
-	/* remote wakeup reset to 0 when the device is reset */
-	dev->remote_wakeup = 0;
-	dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
-
-	/* reset device controller */
-	langwell_udc_reset(dev);
-
-	/* initialize gadget structure */
-	dev->gadget.ops = &langwell_ops;	/* usb_gadget_ops */
-	dev->gadget.ep0 = &dev->ep[0].ep;	/* gadget ep0 */
-	INIT_LIST_HEAD(&dev->gadget.ep_list);	/* ep_list */
-	dev->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
-	dev->gadget.max_speed = USB_SPEED_HIGH;	/* support dual speed */
-
-	/* the "gadget" abstracts/virtualizes the controller */
-	dev_set_name(&dev->gadget.dev, "gadget");
-	dev->gadget.dev.parent = &pdev->dev;
-	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
-	dev->gadget.dev.release = gadget_release;
-	dev->gadget.name = driver_name;		/* gadget name */
-
-	/* controller endpoints reinit */
-	eps_reinit(dev);
-
-	/* reset ep0 dQH and endptctrl */
-	ep0_reset(dev);
-
-	/* create dTD dma_pool resource */
-	dev->dtd_pool = dma_pool_create("langwell_dtd",
-			&dev->pdev->dev,
-			sizeof(struct langwell_dtd),
-			DTD_ALIGNMENT,
-			DMA_BOUNDARY);
-
-	if (!dev->dtd_pool) {
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	/* done */
-	dev_info(&dev->pdev->dev, "%s\n", driver_desc);
-	dev_info(&dev->pdev->dev, "irq %d, pci mem %p\n", pdev->irq, base);
-	dev_info(&dev->pdev->dev, "Driver version: " DRIVER_VERSION "\n");
-	dev_info(&dev->pdev->dev, "Support (max) %d endpoints\n", dev->ep_max);
-	dev_info(&dev->pdev->dev, "Device interface version: 0x%04x\n",
-			dev->dciversion);
-	dev_info(&dev->pdev->dev, "Controller mode: %s\n",
-			dev->devcap ? "Device" : "Host");
-	dev_info(&dev->pdev->dev, "Support USB LPM: %s\n",
-			dev->lpm ? "Yes" : "No");
-
-	dev_vdbg(&dev->pdev->dev,
-			"After langwell_udc_probe(), print all registers:\n");
-	print_all_registers(dev);
-
-	retval = device_register(&dev->gadget.dev);
-	if (retval)
-		goto error;
-
-	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
-	if (retval)
-		goto error;
-
-	retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
-	if (retval)
-		goto error;
-
-	retval = device_create_file(&pdev->dev, &dev_attr_remote_wakeup);
-	if (retval)
-		goto error_attr1;
-
-	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-
-error_attr1:
-	device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
-error:
-	if (dev) {
-		dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		langwell_udc_remove(pdev);
-	}
-
-	return retval;
-}
-
-
-/* device controller suspend */
-static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct langwell_udc	*dev = pci_get_drvdata(pdev);
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	usb_del_gadget_udc(&dev->gadget);
-	/* disable interrupt and set controller to stop state */
-	langwell_udc_stop(dev);
-
-	/* disable IRQ handler */
-	if (dev->got_irq)
-		free_irq(pdev->irq, dev);
-	dev->got_irq = 0;
-
-	/* save PCI state */
-	pci_save_state(pdev);
-
-	spin_lock_irq(&dev->lock);
-	/* stop all usb activities */
-	stop_activity(dev);
-	spin_unlock_irq(&dev->lock);
-
-	/* free dTD dma_pool and dQH */
-	if (dev->dtd_pool)
-		dma_pool_destroy(dev->dtd_pool);
-
-	if (dev->ep_dqh)
-		dma_free_coherent(&pdev->dev, dev->ep_dqh_size,
-			dev->ep_dqh, dev->ep_dqh_dma);
-
-	/* release SRAM caching */
-	if (dev->has_sram && dev->got_sram)
-		sram_deinit(dev);
-
-	/* set device power state */
-	pci_set_power_state(pdev, PCI_D3hot);
-
-	/* enter PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 1);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* device controller resume */
-static int langwell_udc_resume(struct pci_dev *pdev)
-{
-	struct langwell_udc	*dev = pci_get_drvdata(pdev);
-	size_t			size;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* exit PHY low power suspend */
-	if (dev->pdev->device != 0x0829)
-		langwell_phy_low_power(dev, 0);
-
-	/* set device D0 power state */
-	pci_set_power_state(pdev, PCI_D0);
-
-	/* enable SRAM caching if detected */
-	if (dev->has_sram && !dev->got_sram)
-		sram_init(dev);
-
-	/* allocate device dQH memory */
-	size = dev->ep_max * sizeof(struct langwell_dqh);
-	dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
-	if (size < DQH_ALIGNMENT)
-		size = DQH_ALIGNMENT;
-	else if ((size % DQH_ALIGNMENT) != 0) {
-		size += DQH_ALIGNMENT + 1;
-		size &= ~(DQH_ALIGNMENT - 1);
-	}
-	dev->ep_dqh = dma_alloc_coherent(&pdev->dev, size,
-					&dev->ep_dqh_dma, GFP_KERNEL);
-	if (!dev->ep_dqh) {
-		dev_err(&dev->pdev->dev, "allocate dQH memory failed\n");
-		return -ENOMEM;
-	}
-	dev->ep_dqh_size = size;
-	dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
-
-	/* create dTD dma_pool resource */
-	dev->dtd_pool = dma_pool_create("langwell_dtd",
-			&dev->pdev->dev,
-			sizeof(struct langwell_dtd),
-			DTD_ALIGNMENT,
-			DMA_BOUNDARY);
-
-	if (!dev->dtd_pool)
-		return -ENOMEM;
-
-	/* restore PCI state */
-	pci_restore_state(pdev);
-
-	/* enable IRQ handler */
-	if (request_irq(pdev->irq, langwell_irq, IRQF_SHARED,
-				driver_name, dev) != 0) {
-		dev_err(&dev->pdev->dev, "request interrupt %d failed\n",
-				pdev->irq);
-		return -EBUSY;
-	}
-	dev->got_irq = 1;
-
-	/* reset and start controller to run state */
-	if (dev->stopped) {
-		/* reset device controller */
-		langwell_udc_reset(dev);
-
-		/* reset ep0 dQH and endptctrl */
-		ep0_reset(dev);
-
-		/* start device if gadget is loaded */
-		if (dev->driver)
-			langwell_udc_start(dev);
-	}
-
-	/* reset USB status */
-	dev->usb_state = USB_STATE_ATTACHED;
-	dev->ep0_state = WAIT_FOR_SETUP;
-	dev->ep0_dir = USB_DIR_OUT;
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-	return 0;
-}
-
-
-/* pci driver shutdown */
-static void langwell_udc_shutdown(struct pci_dev *pdev)
-{
-	struct langwell_udc	*dev = pci_get_drvdata(pdev);
-	u32			usbmode;
-
-	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
-
-	/* reset controller mode to IDLE */
-	usbmode = readl(&dev->op_regs->usbmode);
-	dev_dbg(&dev->pdev->dev, "usbmode = 0x%08x\n", usbmode);
-	usbmode &= (~3 | MODE_IDLE);
-	writel(usbmode, &dev->op_regs->usbmode);
-
-	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct pci_device_id pci_ids[] = { {
-	.class =	((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
-	.class_mask =	~0,
-	.vendor =	0x8086,
-	.device =	0x0811,
-	.subvendor =	PCI_ANY_ID,
-	.subdevice =	PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-MODULE_DEVICE_TABLE(pci, pci_ids);
-
-
-static struct pci_driver langwell_pci_driver = {
-	.name =		(char *) driver_name,
-	.id_table =	pci_ids,
-
-	.probe =	langwell_udc_probe,
-	.remove =	langwell_udc_remove,
-
-	/* device controller suspend/resume */
-	.suspend =	langwell_udc_suspend,
-	.resume =	langwell_udc_resume,
-
-	.shutdown =	langwell_udc_shutdown,
-};
-
-
-static int __init init(void)
-{
-	return pci_register_driver(&langwell_pci_driver);
-}
-module_init(init);
-
-
-static void __exit cleanup(void)
-{
-	pci_unregister_driver(&langwell_pci_driver);
-}
-module_exit(cleanup);
-
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Xiaochen Shen <xiaochen.shen@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
deleted file mode 100644
index 8c8087abb481..000000000000
--- a/drivers/usb/gadget/langwell_udc.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-#include <linux/usb/langwell_udc.h>
-
-/*-------------------------------------------------------------------------*/
-
-/* driver data structures and utilities */
-
-/*
- * dTD: Device Endpoint Transfer Descriptor
- * describe to the device controller the location and quantity of
- * data to be send/received for given transfer
- */
-struct langwell_dtd {
-	u32	dtd_next;
-/* bits 31:5, next transfer element pointer */
-#define	DTD_NEXT(d)	(((d)>>5)&0x7ffffff)
-#define	DTD_NEXT_MASK	(0x7ffffff << 5)
-/* terminate */
-#define	DTD_TERM	BIT(0)
-	/* bits 7:0, execution back states */
-	u32	dtd_status:8;
-#define	DTD_STATUS(d)	(((d)>>0)&0xff)
-#define	DTD_STS_ACTIVE	BIT(7)	/* active */
-#define	DTD_STS_HALTED	BIT(6)	/* halted */
-#define	DTD_STS_DBE	BIT(5)	/* data buffer error */
-#define	DTD_STS_TRE	BIT(3)	/* transaction error  */
-	/* bits 9:8 */
-	u32	dtd_res0:2;
-	/* bits 11:10, multipier override */
-	u32	dtd_multo:2;
-#define	DTD_MULTO	(BIT(11) | BIT(10))
-	/* bits 14:12 */
-	u32	dtd_res1:3;
-	/* bit 15, interrupt on complete */
-	u32	dtd_ioc:1;
-#define	DTD_IOC		BIT(15)
-	/* bits 30:16, total bytes */
-	u32	dtd_total:15;
-#define	DTD_TOTAL(d)	(((d)>>16)&0x7fff)
-#define	DTD_MAX_TRANSFER_LENGTH	0x4000
-	/* bit 31 */
-	u32	dtd_res2:1;
-	/* dTD buffer pointer page 0 to 4 */
-	u32	dtd_buf[5];
-#define	DTD_OFFSET_MASK	0xfff
-/* bits 31:12, buffer pointer */
-#define	DTD_BUFFER(d)	(((d)>>12)&0x3ff)
-/* bits 11:0, current offset */
-#define	DTD_C_OFFSET(d)	(((d)>>0)&0xfff)
-/* bits 10:0, frame number */
-#define	DTD_FRAME(d)	(((d)>>0)&0x7ff)
-
-	/* driver-private parts */
-
-	/* dtd dma address */
-	dma_addr_t		dtd_dma;
-	/* next dtd virtual address */
-	struct langwell_dtd	*next_dtd_virt;
-};
-
-
-/*
- * dQH: Device Endpoint Queue Head
- * describe where all transfers are managed
- * 48-byte data structure, aligned on 64-byte boundary
- *
- * These are associated with dTD structure
- */
-struct langwell_dqh {
-	/* endpoint capabilities and characteristics */
-	u32	dqh_res0:15;	/* bits 14:0 */
-	u32	dqh_ios:1;	/* bit 15, interrupt on setup */
-#define	DQH_IOS		BIT(15)
-	u32	dqh_mpl:11;	/* bits 26:16, maximum packet length */
-#define	DQH_MPL		(0x7ff << 16)
-	u32	dqh_res1:2;	/* bits 28:27 */
-	u32	dqh_zlt:1;	/* bit 29, zero length termination */
-#define	DQH_ZLT		BIT(29)
-	u32	dqh_mult:2;	/* bits 31:30 */
-#define	DQH_MULT	(BIT(30) | BIT(31))
-
-	/* current dTD pointer */
-	u32	dqh_current;	/* locate the transfer in progress */
-#define DQH_C_DTD(e)	\
-	(((e)>>5)&0x7ffffff)	/* bits 31:5, current dTD pointer */
-
-	/* transfer overlay, hardware parts of a struct langwell_dtd */
-	u32	dtd_next;
-	u32	dtd_status:8;	/* bits 7:0, execution back states */
-	u32	dtd_res0:2;	/* bits 9:8 */
-	u32	dtd_multo:2;	/* bits 11:10, multipier override */
-	u32	dtd_res1:3;	/* bits 14:12 */
-	u32	dtd_ioc:1;	/* bit 15, interrupt on complete */
-	u32	dtd_total:15;	/* bits 30:16, total bytes */
-	u32	dtd_res2:1;	/* bit 31 */
-	u32	dtd_buf[5];	/* dTD buffer pointer page 0 to 4 */
-
-	u32	dqh_res2;
-	struct usb_ctrlrequest	dqh_setup;	/* setup packet buffer */
-} __attribute__ ((aligned(64)));
-
-
-/* endpoint data structure */
-struct langwell_ep {
-	struct usb_ep		ep;
-	dma_addr_t		dma;
-	struct langwell_udc	*dev;
-	unsigned long		irqs;
-	struct list_head	queue;
-	struct langwell_dqh	*dqh;
-	const struct usb_endpoint_descriptor	*desc;
-	char			name[14];
-	unsigned		stopped:1,
-				ep_type:2,
-				ep_num:8;
-};
-
-
-/* request data structure */
-struct langwell_request {
-	struct usb_request	req;
-	struct langwell_dtd	*dtd, *head, *tail;
-	struct langwell_ep	*ep;
-	dma_addr_t		dtd_dma;
-	struct list_head	queue;
-	unsigned		dtd_count;
-	unsigned		mapped:1;
-};
-
-
-/* ep0 transfer state */
-enum ep0_state {
-	WAIT_FOR_SETUP,
-	DATA_STATE_XMIT,
-	DATA_STATE_NEED_ZLP,
-	WAIT_FOR_OUT_STATUS,
-	DATA_STATE_RECV,
-};
-
-
-/* device suspend state */
-enum lpm_state {
-	LPM_L0,	/* on */
-	LPM_L1,	/* LPM L1 sleep */
-	LPM_L2,	/* suspend */
-	LPM_L3,	/* off */
-};
-
-
-/* device data structure */
-struct langwell_udc {
-	/* each pci device provides one gadget, several endpoints */
-	struct usb_gadget	gadget;
-	spinlock_t		lock;	/* device lock */
-	struct langwell_ep	*ep;
-	struct usb_gadget_driver	*driver;
-	struct usb_phy		*transceiver;
-	u8			dev_addr;
-	u32			usb_state;
-	u32			resume_state;
-	u32			bus_reset;
-	enum lpm_state		lpm_state;
-	enum ep0_state		ep0_state;
-	u32			ep0_dir;
-	u16			dciversion;
-	unsigned		ep_max;
-	unsigned		devcap:1,
-				enabled:1,
-				region:1,
-				got_irq:1,
-				powered:1,
-				remote_wakeup:1,
-				rate:1,
-				is_reset:1,
-				softconnected:1,
-				vbus_active:1,
-				suspended:1,
-				stopped:1,
-				lpm:1,		/* LPM capability */
-				has_sram:1,	/* SRAM caching */
-				got_sram:1;
-
-	/* pci state used to access those endpoints */
-	struct pci_dev		*pdev;
-
-	/* Langwell otg transceiver */
-	struct langwell_otg	*lotg;
-
-	/* control registers */
-	struct langwell_cap_regs	__iomem	*cap_regs;
-	struct langwell_op_regs		__iomem	*op_regs;
-
-	struct usb_ctrlrequest	local_setup_buff;
-	struct langwell_dqh	*ep_dqh;
-	size_t			ep_dqh_size;
-	dma_addr_t		ep_dqh_dma;
-
-	/* ep0 status request */
-	struct langwell_request	*status_req;
-
-	/* dma pool */
-	struct dma_pool		*dtd_pool;
-
-	/* make sure release() is done */
-	struct completion	*done;
-
-	/* for private SRAM caching */
-	unsigned int		sram_addr;
-	unsigned int		sram_size;
-
-	/* device status data for get_status request */
-	u16			dev_status;
-};
-
-#define gadget_to_langwell(g)	container_of((g), struct langwell_udc, gadget)
-
diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c
new file mode 100644
index 000000000000..262acfd53e32
--- /dev/null
+++ b/drivers/usb/gadget/lpc32xx_udc.c
@@ -0,0 +1,3538 @@
+/*
+ * USB Gadget driver for LPC32xx
+ *
+ * Authors:
+ *    Kevin Wells <kevin.wells@nxp.com>
+ *    Mike James
+ *    Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright (C) 2006 Philips Semiconductors
+ * Copyright (C) 2009 NXP Semiconductors
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * Note: This driver is based on original work done by Mike James for
+ *       the LPC3180.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/i2c.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/workqueue.h>
+#include <linux/of.h>
+#include <linux/usb/isp1301.h>
+
+#include <asm/byteorder.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include <mach/platform.h>
+#include <mach/irqs.h>
+#include <mach/board.h>
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+#include <linux/seq_file.h>
+#endif
+
+/*
+ * USB device configuration structure
+ */
+typedef void (*usc_chg_event)(int);
+struct lpc32xx_usbd_cfg {
+	int vbus_drv_pol;   /* 0=active low drive for VBUS via ISP1301 */
+	usc_chg_event conn_chgb; /* Connection change event (optional) */
+	usc_chg_event susp_chgb; /* Suspend/resume event (optional) */
+	usc_chg_event rmwk_chgb; /* Enable/disable remote wakeup */
+};
+
+/*
+ * controller driver data structures
+ */
+
+/* 16 endpoints (not to be confused with 32 hardware endpoints) */
+#define	NUM_ENDPOINTS	16
+
+/*
+ * IRQ indices make reading the code a little easier
+ */
+#define IRQ_USB_LP	0
+#define IRQ_USB_HP	1
+#define IRQ_USB_DEVDMA	2
+#define IRQ_USB_ATX	3
+
+#define EP_OUT 0 /* RX (from host) */
+#define EP_IN 1 /* TX (to host) */
+
+/* Returns the interrupt mask for the selected hardware endpoint */
+#define EP_MASK_SEL(ep, dir) (1 << (((ep) * 2) + dir))
+
+#define EP_INT_TYPE 0
+#define EP_ISO_TYPE 1
+#define EP_BLK_TYPE 2
+#define EP_CTL_TYPE 3
+
+/* EP0 states */
+#define WAIT_FOR_SETUP 0 /* Wait for setup packet */
+#define DATA_IN        1 /* Expect dev->host transfer */
+#define DATA_OUT       2 /* Expect host->dev transfer */
+
+/* DD (DMA Descriptor) structure, requires word alignment, this is already
+ * defined in the LPC32XX USB device header file, but this version is slightly
+ * modified to tag some work data with each DMA descriptor. */
+struct lpc32xx_usbd_dd_gad {
+	u32 dd_next_phy;
+	u32 dd_setup;
+	u32 dd_buffer_addr;
+	u32 dd_status;
+	u32 dd_iso_ps_mem_addr;
+	u32 this_dma;
+	u32 iso_status[6]; /* 5 spare */
+	u32 dd_next_v;
+};
+
+/*
+ * Logical endpoint structure
+ */
+struct lpc32xx_ep {
+	struct usb_ep		ep;
+	struct list_head	queue;
+	struct lpc32xx_udc	*udc;
+
+	u32			hwep_num_base; /* Physical hardware EP */
+	u32			hwep_num; /* Maps to hardware endpoint */
+	u32			maxpacket;
+	u32			lep;
+
+	bool			is_in;
+	bool			req_pending;
+	u32			eptype;
+
+	u32                     totalints;
+
+	bool			wedge;
+
+	const struct usb_endpoint_descriptor *desc;
+};
+
+/*
+ * Common UDC structure
+ */
+struct lpc32xx_udc {
+	struct usb_gadget	gadget;
+	struct usb_gadget_driver *driver;
+	struct platform_device	*pdev;
+	struct device		*dev;
+	struct dentry		*pde;
+	spinlock_t		lock;
+	struct i2c_client	*isp1301_i2c_client;
+
+	/* Board and device specific */
+	struct lpc32xx_usbd_cfg	*board;
+	u32			io_p_start;
+	u32			io_p_size;
+	void __iomem		*udp_baseaddr;
+	int			udp_irq[4];
+	struct clk		*usb_pll_clk;
+	struct clk		*usb_slv_clk;
+
+	/* DMA support */
+	u32			*udca_v_base;
+	u32			udca_p_base;
+	struct dma_pool		*dd_cache;
+
+	/* Common EP and control data */
+	u32			enabled_devints;
+	u32			enabled_hwepints;
+	u32			dev_status;
+	u32			realized_eps;
+
+	/* VBUS detection, pullup, and power flags */
+	u8			vbus;
+	u8			last_vbus;
+	int			pullup;
+	int			poweron;
+
+	/* Work queues related to I2C support */
+	struct work_struct	pullup_job;
+	struct work_struct	vbus_job;
+	struct work_struct	power_job;
+
+	/* USB device peripheral - various */
+	struct lpc32xx_ep	ep[NUM_ENDPOINTS];
+	bool			enabled;
+	bool			clocked;
+	bool			suspended;
+	bool			selfpowered;
+	int                     ep0state;
+	atomic_t                enabled_ep_cnt;
+	wait_queue_head_t       ep_disable_wait_queue;
+};
+
+/*
+ * Endpoint request
+ */
+struct lpc32xx_request {
+	struct usb_request	req;
+	struct list_head	queue;
+	struct lpc32xx_usbd_dd_gad *dd_desc_ptr;
+	bool			mapped;
+	bool			send_zlp;
+};
+
+static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g)
+{
+	return container_of(g, struct lpc32xx_udc, gadget);
+}
+
+#define ep_dbg(epp, fmt, arg...) \
+	dev_dbg(epp->udc->dev, "%s: " fmt, __func__, ## arg)
+#define ep_err(epp, fmt, arg...) \
+	dev_err(epp->udc->dev, "%s: " fmt, __func__, ## arg)
+#define ep_info(epp, fmt, arg...) \
+	dev_info(epp->udc->dev, "%s: " fmt, __func__, ## arg)
+#define ep_warn(epp, fmt, arg...) \
+	dev_warn(epp->udc->dev, "%s:" fmt, __func__, ## arg)
+
+#define UDCA_BUFF_SIZE (128)
+
+/* TODO: When the clock framework is introduced in LPC32xx, IO_ADDRESS will
+ * be replaced with an inremap()ed pointer, see USB_OTG_CLK_CTRL()
+ * */
+#define USB_CTRL		IO_ADDRESS(LPC32XX_CLK_PM_BASE + 0x64)
+#define USB_CLOCK_MASK		(AHB_M_CLOCK_ON | OTG_CLOCK_ON | \
+				 DEV_CLOCK_ON | I2C_CLOCK_ON)
+
+/* USB_CTRL bit defines */
+#define USB_SLAVE_HCLK_EN	(1 << 24)
+#define USB_HOST_NEED_CLK_EN	(1 << 21)
+#define USB_DEV_NEED_CLK_EN	(1 << 22)
+
+#define USB_OTG_CLK_CTRL(udc)	((udc)->udp_baseaddr + 0xFF4)
+#define USB_OTG_CLK_STAT(udc)	((udc)->udp_baseaddr + 0xFF8)
+
+/* USB_OTG_CLK_CTRL bit defines */
+#define AHB_M_CLOCK_ON		(1 << 4)
+#define OTG_CLOCK_ON		(1 << 3)
+#define I2C_CLOCK_ON		(1 << 2)
+#define DEV_CLOCK_ON		(1 << 1)
+#define HOST_CLOCK_ON		(1 << 0)
+
+#define USB_OTG_STAT_CONTROL(udc) (udc->udp_baseaddr + 0x110)
+
+/* USB_OTG_STAT_CONTROL bit defines */
+#define TRANSPARENT_I2C_EN	(1 << 7)
+#define HOST_EN			(1 << 0)
+
+/**********************************************************************
+ * USB device controller register offsets
+ **********************************************************************/
+
+#define USBD_DEVINTST(x)	((x) + 0x200)
+#define USBD_DEVINTEN(x)	((x) + 0x204)
+#define USBD_DEVINTCLR(x)	((x) + 0x208)
+#define USBD_DEVINTSET(x)	((x) + 0x20C)
+#define USBD_CMDCODE(x)		((x) + 0x210)
+#define USBD_CMDDATA(x)		((x) + 0x214)
+#define USBD_RXDATA(x)		((x) + 0x218)
+#define USBD_TXDATA(x)		((x) + 0x21C)
+#define USBD_RXPLEN(x)		((x) + 0x220)
+#define USBD_TXPLEN(x)		((x) + 0x224)
+#define USBD_CTRL(x)		((x) + 0x228)
+#define USBD_DEVINTPRI(x)	((x) + 0x22C)
+#define USBD_EPINTST(x)		((x) + 0x230)
+#define USBD_EPINTEN(x)		((x) + 0x234)
+#define USBD_EPINTCLR(x)	((x) + 0x238)
+#define USBD_EPINTSET(x)	((x) + 0x23C)
+#define USBD_EPINTPRI(x)	((x) + 0x240)
+#define USBD_REEP(x)		((x) + 0x244)
+#define USBD_EPIND(x)		((x) + 0x248)
+#define USBD_EPMAXPSIZE(x)	((x) + 0x24C)
+/* DMA support registers only below */
+/* Set, clear, or get enabled state of the DMA request status. If
+ * enabled, an IN or OUT token will start a DMA transfer for the EP */
+#define USBD_DMARST(x)		((x) + 0x250)
+#define USBD_DMARCLR(x)		((x) + 0x254)
+#define USBD_DMARSET(x)		((x) + 0x258)
+/* DMA UDCA head pointer */
+#define USBD_UDCAH(x)		((x) + 0x280)
+/* EP DMA status, enable, and disable. This is used to specifically
+ * enabled or disable DMA for a specific EP */
+#define USBD_EPDMAST(x)		((x) + 0x284)
+#define USBD_EPDMAEN(x)		((x) + 0x288)
+#define USBD_EPDMADIS(x)	((x) + 0x28C)
+/* DMA master interrupts enable and pending interrupts */
+#define USBD_DMAINTST(x)	((x) + 0x290)
+#define USBD_DMAINTEN(x)	((x) + 0x294)
+/* DMA end of transfer interrupt enable, disable, status */
+#define USBD_EOTINTST(x)	((x) + 0x2A0)
+#define USBD_EOTINTCLR(x)	((x) + 0x2A4)
+#define USBD_EOTINTSET(x)	((x) + 0x2A8)
+/* New DD request interrupt enable, disable, status */
+#define USBD_NDDRTINTST(x)	((x) + 0x2AC)
+#define USBD_NDDRTINTCLR(x)	((x) + 0x2B0)
+#define USBD_NDDRTINTSET(x)	((x) + 0x2B4)
+/* DMA error interrupt enable, disable, status */
+#define USBD_SYSERRTINTST(x)	((x) + 0x2B8)
+#define USBD_SYSERRTINTCLR(x)	((x) + 0x2BC)
+#define USBD_SYSERRTINTSET(x)	((x) + 0x2C0)
+
+/**********************************************************************
+ * USBD_DEVINTST/USBD_DEVINTEN/USBD_DEVINTCLR/USBD_DEVINTSET/
+ * USBD_DEVINTPRI register definitions
+ **********************************************************************/
+#define USBD_ERR_INT		(1 << 9)
+#define USBD_EP_RLZED		(1 << 8)
+#define USBD_TXENDPKT		(1 << 7)
+#define USBD_RXENDPKT		(1 << 6)
+#define USBD_CDFULL		(1 << 5)
+#define USBD_CCEMPTY		(1 << 4)
+#define USBD_DEV_STAT		(1 << 3)
+#define USBD_EP_SLOW		(1 << 2)
+#define USBD_EP_FAST		(1 << 1)
+#define USBD_FRAME		(1 << 0)
+
+/**********************************************************************
+ * USBD_EPINTST/USBD_EPINTEN/USBD_EPINTCLR/USBD_EPINTSET/
+ * USBD_EPINTPRI register definitions
+ **********************************************************************/
+/* End point selection macro (RX) */
+#define USBD_RX_EP_SEL(e)	(1 << ((e) << 1))
+
+/* End point selection macro (TX) */
+#define USBD_TX_EP_SEL(e)	(1 << (((e) << 1) + 1))
+
+/**********************************************************************
+ * USBD_REEP/USBD_DMARST/USBD_DMARCLR/USBD_DMARSET/USBD_EPDMAST/
+ * USBD_EPDMAEN/USBD_EPDMADIS/
+ * USBD_NDDRTINTST/USBD_NDDRTINTCLR/USBD_NDDRTINTSET/
+ * USBD_EOTINTST/USBD_EOTINTCLR/USBD_EOTINTSET/
+ * USBD_SYSERRTINTST/USBD_SYSERRTINTCLR/USBD_SYSERRTINTSET
+ * register definitions
+ **********************************************************************/
+/* Endpoint selection macro */
+#define USBD_EP_SEL(e)		(1 << (e))
+
+/**********************************************************************
+ * SBD_DMAINTST/USBD_DMAINTEN
+ **********************************************************************/
+#define USBD_SYS_ERR_INT	(1 << 2)
+#define USBD_NEW_DD_INT		(1 << 1)
+#define USBD_EOT_INT		(1 << 0)
+
+/**********************************************************************
+ * USBD_RXPLEN register definitions
+ **********************************************************************/
+#define USBD_PKT_RDY		(1 << 11)
+#define USBD_DV			(1 << 10)
+#define USBD_PK_LEN_MASK	0x3FF
+
+/**********************************************************************
+ * USBD_CTRL register definitions
+ **********************************************************************/
+#define USBD_LOG_ENDPOINT(e)	((e) << 2)
+#define USBD_WR_EN		(1 << 1)
+#define USBD_RD_EN		(1 << 0)
+
+/**********************************************************************
+ * USBD_CMDCODE register definitions
+ **********************************************************************/
+#define USBD_CMD_CODE(c)	((c) << 16)
+#define USBD_CMD_PHASE(p)	((p) << 8)
+
+/**********************************************************************
+ * USBD_DMARST/USBD_DMARCLR/USBD_DMARSET register definitions
+ **********************************************************************/
+#define USBD_DMAEP(e)		(1 << (e))
+
+/* DD (DMA Descriptor) structure, requires word alignment */
+struct lpc32xx_usbd_dd {
+	u32 *dd_next;
+	u32 dd_setup;
+	u32 dd_buffer_addr;
+	u32 dd_status;
+	u32 dd_iso_ps_mem_addr;
+};
+
+/* dd_setup bit defines */
+#define DD_SETUP_ATLE_DMA_MODE	0x01
+#define DD_SETUP_NEXT_DD_VALID	0x04
+#define DD_SETUP_ISO_EP		0x10
+#define DD_SETUP_PACKETLEN(n)	(((n) & 0x7FF) << 5)
+#define DD_SETUP_DMALENBYTES(n)	(((n) & 0xFFFF) << 16)
+
+/* dd_status bit defines */
+#define DD_STATUS_DD_RETIRED	0x01
+#define DD_STATUS_STS_MASK	0x1E
+#define DD_STATUS_STS_NS	0x00 /* Not serviced */
+#define DD_STATUS_STS_BS	0x02 /* Being serviced */
+#define DD_STATUS_STS_NC	0x04 /* Normal completion */
+#define DD_STATUS_STS_DUR	0x06 /* Data underrun (short packet) */
+#define DD_STATUS_STS_DOR	0x08 /* Data overrun */
+#define DD_STATUS_STS_SE	0x12 /* System error */
+#define DD_STATUS_PKT_VAL	0x20 /* Packet valid */
+#define DD_STATUS_LSB_EX	0x40 /* LS byte extracted (ATLE) */
+#define DD_STATUS_MSB_EX	0x80 /* MS byte extracted (ATLE) */
+#define DD_STATUS_MLEN(n)	(((n) >> 8) & 0x3F)
+#define DD_STATUS_CURDMACNT(n)	(((n) >> 16) & 0xFFFF)
+
+/*
+ *
+ * Protocol engine bits below
+ *
+ */
+/* Device Interrupt Bit Definitions */
+#define FRAME_INT		0x00000001
+#define EP_FAST_INT		0x00000002
+#define EP_SLOW_INT		0x00000004
+#define DEV_STAT_INT		0x00000008
+#define CCEMTY_INT		0x00000010
+#define CDFULL_INT		0x00000020
+#define RxENDPKT_INT		0x00000040
+#define TxENDPKT_INT		0x00000080
+#define EP_RLZED_INT		0x00000100
+#define ERR_INT			0x00000200
+
+/* Rx & Tx Packet Length Definitions */
+#define PKT_LNGTH_MASK		0x000003FF
+#define PKT_DV			0x00000400
+#define PKT_RDY			0x00000800
+
+/* USB Control Definitions */
+#define CTRL_RD_EN		0x00000001
+#define CTRL_WR_EN		0x00000002
+
+/* Command Codes */
+#define CMD_SET_ADDR		0x00D00500
+#define CMD_CFG_DEV		0x00D80500
+#define CMD_SET_MODE		0x00F30500
+#define CMD_RD_FRAME		0x00F50500
+#define DAT_RD_FRAME		0x00F50200
+#define CMD_RD_TEST		0x00FD0500
+#define DAT_RD_TEST		0x00FD0200
+#define CMD_SET_DEV_STAT	0x00FE0500
+#define CMD_GET_DEV_STAT	0x00FE0500
+#define DAT_GET_DEV_STAT	0x00FE0200
+#define CMD_GET_ERR_CODE	0x00FF0500
+#define DAT_GET_ERR_CODE	0x00FF0200
+#define CMD_RD_ERR_STAT		0x00FB0500
+#define DAT_RD_ERR_STAT		0x00FB0200
+#define DAT_WR_BYTE(x)		(0x00000100 | ((x) << 16))
+#define CMD_SEL_EP(x)		(0x00000500 | ((x) << 16))
+#define DAT_SEL_EP(x)		(0x00000200 | ((x) << 16))
+#define CMD_SEL_EP_CLRI(x)	(0x00400500 | ((x) << 16))
+#define DAT_SEL_EP_CLRI(x)	(0x00400200 | ((x) << 16))
+#define CMD_SET_EP_STAT(x)	(0x00400500 | ((x) << 16))
+#define CMD_CLR_BUF		0x00F20500
+#define DAT_CLR_BUF		0x00F20200
+#define CMD_VALID_BUF		0x00FA0500
+
+/* Device Address Register Definitions */
+#define DEV_ADDR_MASK		0x7F
+#define DEV_EN			0x80
+
+/* Device Configure Register Definitions */
+#define CONF_DVICE		0x01
+
+/* Device Mode Register Definitions */
+#define AP_CLK			0x01
+#define INAK_CI			0x02
+#define INAK_CO			0x04
+#define INAK_II			0x08
+#define INAK_IO			0x10
+#define INAK_BI			0x20
+#define INAK_BO			0x40
+
+/* Device Status Register Definitions */
+#define DEV_CON			0x01
+#define DEV_CON_CH		0x02
+#define DEV_SUS			0x04
+#define DEV_SUS_CH		0x08
+#define DEV_RST			0x10
+
+/* Error Code Register Definitions */
+#define ERR_EC_MASK		0x0F
+#define ERR_EA			0x10
+
+/* Error Status Register Definitions */
+#define ERR_PID			0x01
+#define ERR_UEPKT		0x02
+#define ERR_DCRC		0x04
+#define ERR_TIMOUT		0x08
+#define ERR_EOP			0x10
+#define ERR_B_OVRN		0x20
+#define ERR_BTSTF		0x40
+#define ERR_TGL			0x80
+
+/* Endpoint Select Register Definitions */
+#define EP_SEL_F		0x01
+#define EP_SEL_ST		0x02
+#define EP_SEL_STP		0x04
+#define EP_SEL_PO		0x08
+#define EP_SEL_EPN		0x10
+#define EP_SEL_B_1_FULL		0x20
+#define EP_SEL_B_2_FULL		0x40
+
+/* Endpoint Status Register Definitions */
+#define EP_STAT_ST		0x01
+#define EP_STAT_DA		0x20
+#define EP_STAT_RF_MO		0x40
+#define EP_STAT_CND_ST		0x80
+
+/* Clear Buffer Register Definitions */
+#define CLR_BUF_PO		0x01
+
+/* DMA Interrupt Bit Definitions */
+#define EOT_INT			0x01
+#define NDD_REQ_INT		0x02
+#define SYS_ERR_INT		0x04
+
+#define	DRIVER_VERSION	"1.03"
+static const char driver_name[] = "lpc32xx_udc";
+
+/*
+ *
+ * proc interface support
+ *
+ */
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+static char *epnames[] = {"INT", "ISO", "BULK", "CTRL"};
+static const char debug_filename[] = "driver/udc";
+
+static void proc_ep_show(struct seq_file *s, struct lpc32xx_ep *ep)
+{
+	struct lpc32xx_request *req;
+
+	seq_printf(s, "\n");
+	seq_printf(s, "%12s, maxpacket %4d %3s",
+			ep->ep.name, ep->ep.maxpacket,
+			ep->is_in ? "in" : "out");
+	seq_printf(s, " type %4s", epnames[ep->eptype]);
+	seq_printf(s, " ints: %12d", ep->totalints);
+
+	if (list_empty(&ep->queue))
+		seq_printf(s, "\t(queue empty)\n");
+	else {
+		list_for_each_entry(req, &ep->queue, queue) {
+			u32 length = req->req.actual;
+
+			seq_printf(s, "\treq %p len %d/%d buf %p\n",
+				   &req->req, length,
+				   req->req.length, req->req.buf);
+		}
+	}
+}
+
+static int proc_udc_show(struct seq_file *s, void *unused)
+{
+	struct lpc32xx_udc *udc = s->private;
+	struct lpc32xx_ep *ep;
+	unsigned long flags;
+
+	seq_printf(s, "%s: version %s\n", driver_name, DRIVER_VERSION);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	seq_printf(s, "vbus %s, pullup %s, %s powered%s, gadget %s\n\n",
+		   udc->vbus ? "present" : "off",
+		   udc->enabled ? (udc->vbus ? "active" : "enabled") :
+		   "disabled",
+		   udc->selfpowered ? "self" : "VBUS",
+		   udc->suspended ? ", suspended" : "",
+		   udc->driver ? udc->driver->driver.name : "(none)");
+
+	if (udc->enabled && udc->vbus) {
+		proc_ep_show(s, &udc->ep[0]);
+		list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+			if (ep->desc)
+				proc_ep_show(s, ep);
+		}
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static int proc_udc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, proc_udc_show, PDE(inode)->data);
+}
+
+static const struct file_operations proc_ops = {
+	.owner		= THIS_MODULE,
+	.open		= proc_udc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void create_debug_file(struct lpc32xx_udc *udc)
+{
+	udc->pde = debugfs_create_file(debug_filename, 0, NULL, udc, &proc_ops);
+}
+
+static void remove_debug_file(struct lpc32xx_udc *udc)
+{
+	if (udc->pde)
+		debugfs_remove(udc->pde);
+}
+
+#else
+static inline void create_debug_file(struct lpc32xx_udc *udc) {}
+static inline void remove_debug_file(struct lpc32xx_udc *udc) {}
+#endif
+
+/* Primary initialization sequence for the ISP1301 transceiver */
+static void isp1301_udc_configure(struct lpc32xx_udc *udc)
+{
+	/* LPC32XX only supports DAT_SE0 USB mode */
+	/* This sequence is important */
+
+	/* Disable transparent UART mode first */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
+		MC1_UART_EN);
+
+	/* Set full speed and SE0 mode */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		(ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_MODE_CONTROL_1, (MC1_SPEED_REG | MC1_DAT_SE0));
+
+	/*
+	 * The PSW_OE enable bit state is reversed in the ISP1301 User's Guide
+	 */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		(ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_SPD_SUSP_CTRL));
+
+	/* Driver VBUS_DRV high or low depending on board setup */
+	if (udc->board->vbus_drv_pol != 0)
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
+	else
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
+			OTG1_VBUS_DRV);
+
+	/* Bi-directional mode with suspend control
+	 * Enable both pulldowns for now - the pullup will be enable when VBUS
+	 * is detected */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_OTG_CONTROL_1,
+		(0 | OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
+
+	/* Discharge VBUS (just in case) */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG);
+	msleep(1);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
+		OTG1_VBUS_DISCHRG);
+
+	/* Clear and enable VBUS high edge interrupt */
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_FALLING, INT_VBUS_VLD);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+	i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+		ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD);
+
+	/* Enable usb_need_clk clock after transceiver is initialized */
+	writel((readl(USB_CTRL) | (1 << 22)), USB_CTRL);
+
+	dev_info(udc->dev, "ISP1301 Vendor ID  : 0x%04x\n",
+		 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00));
+	dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n",
+		 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x02));
+	dev_info(udc->dev, "ISP1301 Version ID : 0x%04x\n",
+		 i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x14));
+}
+
+/* Enables or disables the USB device pullup via the ISP1301 transceiver */
+static void isp1301_pullup_set(struct lpc32xx_udc *udc)
+{
+	if (udc->pullup)
+		/* Enable pullup for bus signalling */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1, OTG1_DP_PULLUP);
+	else
+		/* Enable pullup for bus signalling */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
+			OTG1_DP_PULLUP);
+}
+
+static void pullup_work(struct work_struct *work)
+{
+	struct lpc32xx_udc *udc =
+		container_of(work, struct lpc32xx_udc, pullup_job);
+
+	isp1301_pullup_set(udc);
+}
+
+static void isp1301_pullup_enable(struct lpc32xx_udc *udc, int en_pullup,
+				  int block)
+{
+	if (en_pullup == udc->pullup)
+		return;
+
+	udc->pullup = en_pullup;
+	if (block)
+		isp1301_pullup_set(udc);
+	else
+		/* defer slow i2c pull up setting */
+		schedule_work(&udc->pullup_job);
+}
+
+#ifdef CONFIG_PM
+/* Powers up or down the ISP1301 transceiver */
+static void isp1301_set_powerstate(struct lpc32xx_udc *udc, int enable)
+{
+	if (enable != 0)
+		/* Power up ISP1301 - this ISP1301 will automatically wakeup
+		   when VBUS is detected */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR,
+			MC2_GLOBAL_PWR_DN);
+	else
+		/* Power down ISP1301 */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
+}
+
+static void power_work(struct work_struct *work)
+{
+	struct lpc32xx_udc *udc =
+		container_of(work, struct lpc32xx_udc, power_job);
+
+	isp1301_set_powerstate(udc, udc->poweron);
+}
+#endif
+
+/*
+ *
+ * USB protocol engine command/data read/write helper functions
+ *
+ */
+/* Issues a single command to the USB device state machine */
+static void udc_protocol_cmd_w(struct lpc32xx_udc *udc, u32 cmd)
+{
+	u32 pass = 0;
+	int to;
+
+	/* EP may lock on CLRI if this read isn't done */
+	u32 tmp = readl(USBD_DEVINTST(udc->udp_baseaddr));
+	(void) tmp;
+
+	while (pass == 0) {
+		writel(USBD_CCEMPTY, USBD_DEVINTCLR(udc->udp_baseaddr));
+
+		/* Write command code */
+		writel(cmd, USBD_CMDCODE(udc->udp_baseaddr));
+		to = 10000;
+		while (((readl(USBD_DEVINTST(udc->udp_baseaddr)) &
+			 USBD_CCEMPTY) == 0) && (to > 0)) {
+			to--;
+		}
+
+		if (to > 0)
+			pass = 1;
+
+		cpu_relax();
+	}
+}
+
+/* Issues 2 commands (or command and data) to the USB device state machine */
+static inline void udc_protocol_cmd_data_w(struct lpc32xx_udc *udc, u32 cmd,
+					   u32 data)
+{
+	udc_protocol_cmd_w(udc, cmd);
+	udc_protocol_cmd_w(udc, data);
+}
+
+/* Issues a single command to the USB device state machine and reads
+ * response data */
+static u32 udc_protocol_cmd_r(struct lpc32xx_udc *udc, u32 cmd)
+{
+	u32 tmp;
+	int to = 1000;
+
+	/* Write a command and read data from the protocol engine */
+	writel((USBD_CDFULL | USBD_CCEMPTY),
+		     USBD_DEVINTCLR(udc->udp_baseaddr));
+
+	/* Write command code */
+	udc_protocol_cmd_w(udc, cmd);
+
+	tmp = readl(USBD_DEVINTST(udc->udp_baseaddr));
+	while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) & USBD_CDFULL))
+	       && (to > 0))
+		to--;
+	if (!to)
+		dev_dbg(udc->dev,
+			"Protocol engine didn't receive response (CDFULL)\n");
+
+	return readl(USBD_CMDDATA(udc->udp_baseaddr));
+}
+
+/*
+ *
+ * USB device interrupt mask support functions
+ *
+ */
+/* Enable one or more USB device interrupts */
+static inline void uda_enable_devint(struct lpc32xx_udc *udc, u32 devmask)
+{
+	udc->enabled_devints |= devmask;
+	writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr));
+}
+
+/* Disable one or more USB device interrupts */
+static inline void uda_disable_devint(struct lpc32xx_udc *udc, u32 mask)
+{
+	udc->enabled_devints &= ~mask;
+	writel(udc->enabled_devints, USBD_DEVINTEN(udc->udp_baseaddr));
+}
+
+/* Clear one or more USB device interrupts */
+static inline void uda_clear_devint(struct lpc32xx_udc *udc, u32 mask)
+{
+	writel(mask, USBD_DEVINTCLR(udc->udp_baseaddr));
+}
+
+/*
+ *
+ * Endpoint interrupt disable/enable functions
+ *
+ */
+/* Enable one or more USB endpoint interrupts */
+static void uda_enable_hwepint(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc->enabled_hwepints |= (1 << hwep);
+	writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr));
+}
+
+/* Disable one or more USB endpoint interrupts */
+static void uda_disable_hwepint(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc->enabled_hwepints &= ~(1 << hwep);
+	writel(udc->enabled_hwepints, USBD_EPINTEN(udc->udp_baseaddr));
+}
+
+/* Clear one or more USB endpoint interrupts */
+static inline void uda_clear_hwepint(struct lpc32xx_udc *udc, u32 hwep)
+{
+	writel((1 << hwep), USBD_EPINTCLR(udc->udp_baseaddr));
+}
+
+/* Enable DMA for the HW channel */
+static inline void udc_ep_dma_enable(struct lpc32xx_udc *udc, u32 hwep)
+{
+	writel((1 << hwep), USBD_EPDMAEN(udc->udp_baseaddr));
+}
+
+/* Disable DMA for the HW channel */
+static inline void udc_ep_dma_disable(struct lpc32xx_udc *udc, u32 hwep)
+{
+	writel((1 << hwep), USBD_EPDMADIS(udc->udp_baseaddr));
+}
+
+/*
+ *
+ * Endpoint realize/unrealize functions
+ *
+ */
+/* Before an endpoint can be used, it needs to be realized
+ * in the USB protocol engine - this realizes the endpoint.
+ * The interrupt (FIFO or DMA) is not enabled with this function */
+static void udc_realize_hwep(struct lpc32xx_udc *udc, u32 hwep,
+			     u32 maxpacket)
+{
+	int to = 1000;
+
+	writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr));
+	writel(hwep, USBD_EPIND(udc->udp_baseaddr));
+	udc->realized_eps |= (1 << hwep);
+	writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr));
+	writel(maxpacket, USBD_EPMAXPSIZE(udc->udp_baseaddr));
+
+	/* Wait until endpoint is realized in hardware */
+	while ((!(readl(USBD_DEVINTST(udc->udp_baseaddr)) &
+		  USBD_EP_RLZED)) && (to > 0))
+		to--;
+	if (!to)
+		dev_dbg(udc->dev, "EP not correctly realized in hardware\n");
+
+	writel(USBD_EP_RLZED, USBD_DEVINTCLR(udc->udp_baseaddr));
+}
+
+/* Unrealize an EP */
+static void udc_unrealize_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc->realized_eps &= ~(1 << hwep);
+	writel(udc->realized_eps, USBD_REEP(udc->udp_baseaddr));
+}
+
+/*
+ *
+ * Endpoint support functions
+ *
+ */
+/* Select and clear endpoint interrupt */
+static u32 udc_selep_clrint(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_protocol_cmd_w(udc, CMD_SEL_EP_CLRI(hwep));
+	return udc_protocol_cmd_r(udc, DAT_SEL_EP_CLRI(hwep));
+}
+
+/* Disables the endpoint in the USB protocol engine */
+static void udc_disable_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep),
+				DAT_WR_BYTE(EP_STAT_DA));
+}
+
+/* Stalls the endpoint - endpoint will return STALL */
+static void udc_stall_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep),
+				DAT_WR_BYTE(EP_STAT_ST));
+}
+
+/* Clear stall or reset endpoint */
+static void udc_clrstall_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(hwep),
+				DAT_WR_BYTE(0));
+}
+
+/* Select an endpoint for endpoint status, clear, validate */
+static void udc_select_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_protocol_cmd_w(udc, CMD_SEL_EP(hwep));
+}
+
+/*
+ *
+ * Endpoint buffer management functions
+ *
+ */
+/* Clear the current endpoint's buffer */
+static void udc_clr_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_select_hwep(udc, hwep);
+	udc_protocol_cmd_w(udc, CMD_CLR_BUF);
+}
+
+/* Validate the current endpoint's buffer */
+static void udc_val_buffer_hwep(struct lpc32xx_udc *udc, u32 hwep)
+{
+	udc_select_hwep(udc, hwep);
+	udc_protocol_cmd_w(udc, CMD_VALID_BUF);
+}
+
+static inline u32 udc_clearep_getsts(struct lpc32xx_udc *udc, u32 hwep)
+{
+	/* Clear EP interrupt */
+	uda_clear_hwepint(udc, hwep);
+	return udc_selep_clrint(udc, hwep);
+}
+
+/*
+ *
+ * USB EP DMA support
+ *
+ */
+/* Allocate a DMA Descriptor */
+static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc)
+{
+	dma_addr_t			dma;
+	struct lpc32xx_usbd_dd_gad	*dd;
+
+	dd = (struct lpc32xx_usbd_dd_gad *) dma_pool_alloc(
+			udc->dd_cache, (GFP_KERNEL | GFP_DMA), &dma);
+	if (dd)
+		dd->this_dma = dma;
+
+	return dd;
+}
+
+/* Free a DMA Descriptor */
+static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd)
+{
+	dma_pool_free(udc->dd_cache, dd, dd->this_dma);
+}
+
+/*
+ *
+ * USB setup and shutdown functions
+ *
+ */
+/* Enables or disables most of the USB system clocks when low power mode is
+ * needed. Clocks are typically started on a connection event, and disabled
+ * when a cable is disconnected */
+#define OTGOFF_CLK_MASK (AHB_M_CLOCK_ON | I2C_CLOCK_ON)
+static void udc_clk_set(struct lpc32xx_udc *udc, int enable)
+{
+	int to = 1000;
+
+	if (enable != 0) {
+		if (udc->clocked)
+			return;
+
+		udc->clocked = 1;
+
+		/* 48MHz PLL up */
+		clk_enable(udc->usb_pll_clk);
+
+		/* Enable the USB device clock */
+		writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN,
+			     USB_CTRL);
+
+		/* Set to enable all needed USB OTG clocks */
+		writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc));
+
+		while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) !=
+			USB_CLOCK_MASK) && (to > 0))
+			to--;
+		if (!to)
+			dev_dbg(udc->dev, "Cannot enable USB OTG clocking\n");
+	} else {
+		if (!udc->clocked)
+			return;
+
+		udc->clocked = 0;
+
+		/* Never disable the USB_HCLK during normal operation */
+
+		/* 48MHz PLL dpwn */
+		clk_disable(udc->usb_pll_clk);
+
+		/* Enable the USB device clock */
+		writel(readl(USB_CTRL) & ~USB_DEV_NEED_CLK_EN,
+			     USB_CTRL);
+
+		/* Set to enable all needed USB OTG clocks */
+		writel(OTGOFF_CLK_MASK, USB_OTG_CLK_CTRL(udc));
+
+		while (((readl(USB_OTG_CLK_STAT(udc)) &
+			 OTGOFF_CLK_MASK) !=
+			OTGOFF_CLK_MASK) && (to > 0))
+			to--;
+		if (!to)
+			dev_dbg(udc->dev, "Cannot disable USB OTG clocking\n");
+	}
+}
+
+/* Set/reset USB device address */
+static void udc_set_address(struct lpc32xx_udc *udc, u32 addr)
+{
+	/* Address will be latched at the end of the status phase, or
+	   latched immediately if function is called twice */
+	udc_protocol_cmd_data_w(udc, CMD_SET_ADDR,
+				DAT_WR_BYTE(DEV_EN | addr));
+}
+
+/* Setup up a IN request for DMA transfer - this consists of determining the
+ * list of DMA addresses for the transfer, allocating DMA Descriptors,
+ * installing the DD into the UDCA, and then enabling the DMA for that EP */
+static int udc_ep_in_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+{
+	struct lpc32xx_request *req;
+	u32 hwep = ep->hwep_num;
+
+	ep->req_pending = 1;
+
+	/* There will always be a request waiting here */
+	req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
+
+	/* Place the DD Descriptor into the UDCA */
+	udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma;
+
+	/* Enable DMA and interrupt for the HW EP */
+	udc_ep_dma_enable(udc, hwep);
+
+	/* Clear ZLP if last packet is not of MAXP size */
+	if (req->req.length % ep->ep.maxpacket)
+		req->send_zlp = 0;
+
+	return 0;
+}
+
+/* Setup up a OUT request for DMA transfer - this consists of determining the
+ * list of DMA addresses for the transfer, allocating DMA Descriptors,
+ * installing the DD into the UDCA, and then enabling the DMA for that EP */
+static int udc_ep_out_req_dma(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+{
+	struct lpc32xx_request *req;
+	u32 hwep = ep->hwep_num;
+
+	ep->req_pending = 1;
+
+	/* There will always be a request waiting here */
+	req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
+
+	/* Place the DD Descriptor into the UDCA */
+	udc->udca_v_base[hwep] = req->dd_desc_ptr->this_dma;
+
+	/* Enable DMA and interrupt for the HW EP */
+	udc_ep_dma_enable(udc, hwep);
+	return 0;
+}
+
+static void udc_disable(struct lpc32xx_udc *udc)
+{
+	u32 i;
+
+	/* Disable device */
+	udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0));
+	udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(0));
+
+	/* Disable all device interrupts (including EP0) */
+	uda_disable_devint(udc, 0x3FF);
+
+	/* Disable and reset all endpoint interrupts */
+	for (i = 0; i < 32; i++) {
+		uda_disable_hwepint(udc, i);
+		uda_clear_hwepint(udc, i);
+		udc_disable_hwep(udc, i);
+		udc_unrealize_hwep(udc, i);
+		udc->udca_v_base[i] = 0;
+
+		/* Disable and clear all interrupts and DMA */
+		udc_ep_dma_disable(udc, i);
+		writel((1 << i), USBD_EOTINTCLR(udc->udp_baseaddr));
+		writel((1 << i), USBD_NDDRTINTCLR(udc->udp_baseaddr));
+		writel((1 << i), USBD_SYSERRTINTCLR(udc->udp_baseaddr));
+		writel((1 << i), USBD_DMARCLR(udc->udp_baseaddr));
+	}
+
+	/* Disable DMA interrupts */
+	writel(0, USBD_DMAINTEN(udc->udp_baseaddr));
+
+	writel(0, USBD_UDCAH(udc->udp_baseaddr));
+}
+
+static void udc_enable(struct lpc32xx_udc *udc)
+{
+	u32 i;
+	struct lpc32xx_ep *ep = &udc->ep[0];
+
+	/* Start with known state */
+	udc_disable(udc);
+
+	/* Enable device */
+	udc_protocol_cmd_data_w(udc, CMD_SET_DEV_STAT, DAT_WR_BYTE(DEV_CON));
+
+	/* EP interrupts on high priority, FRAME interrupt on low priority */
+	writel(USBD_EP_FAST, USBD_DEVINTPRI(udc->udp_baseaddr));
+	writel(0xFFFF, USBD_EPINTPRI(udc->udp_baseaddr));
+
+	/* Clear any pending device interrupts */
+	writel(0x3FF, USBD_DEVINTCLR(udc->udp_baseaddr));
+
+	/* Setup UDCA - not yet used (DMA) */
+	writel(udc->udca_p_base, USBD_UDCAH(udc->udp_baseaddr));
+
+	/* Only enable EP0 in and out for now, EP0 only works in FIFO mode */
+	for (i = 0; i <= 1; i++) {
+		udc_realize_hwep(udc, i, ep->ep.maxpacket);
+		uda_enable_hwepint(udc, i);
+		udc_select_hwep(udc, i);
+		udc_clrstall_hwep(udc, i);
+		udc_clr_buffer_hwep(udc, i);
+	}
+
+	/* Device interrupt setup */
+	uda_clear_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW |
+			       USBD_EP_FAST));
+	uda_enable_devint(udc, (USBD_ERR_INT | USBD_DEV_STAT | USBD_EP_SLOW |
+				USBD_EP_FAST));
+
+	/* Set device address to 0 - called twice to force a latch in the USB
+	   engine without the need of a setup packet status closure */
+	udc_set_address(udc, 0);
+	udc_set_address(udc, 0);
+
+	/* Enable master DMA interrupts */
+	writel((USBD_SYS_ERR_INT | USBD_EOT_INT),
+		     USBD_DMAINTEN(udc->udp_baseaddr));
+
+	udc->dev_status = 0;
+}
+
+/*
+ *
+ * USB device board specific events handled via callbacks
+ *
+ */
+/* Connection change event - notify board function of change */
+static void uda_power_event(struct lpc32xx_udc *udc, u32 conn)
+{
+	/* Just notify of a connection change event (optional) */
+	if (udc->board->conn_chgb != NULL)
+		udc->board->conn_chgb(conn);
+}
+
+/* Suspend/resume event - notify board function of change */
+static void uda_resm_susp_event(struct lpc32xx_udc *udc, u32 conn)
+{
+	/* Just notify of a Suspend/resume change event (optional) */
+	if (udc->board->susp_chgb != NULL)
+		udc->board->susp_chgb(conn);
+
+	if (conn)
+		udc->suspended = 0;
+	else
+		udc->suspended = 1;
+}
+
+/* Remote wakeup enable/disable - notify board function of change */
+static void uda_remwkp_cgh(struct lpc32xx_udc *udc)
+{
+	if (udc->board->rmwk_chgb != NULL)
+		udc->board->rmwk_chgb(udc->dev_status &
+				      (1 << USB_DEVICE_REMOTE_WAKEUP));
+}
+
+/* Reads data from FIFO, adjusts for alignment and data size */
+static void udc_pop_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes)
+{
+	int n, i, bl;
+	u16 *p16;
+	u32 *p32, tmp, cbytes;
+
+	/* Use optimal data transfer method based on source address and size */
+	switch (((u32) data) & 0x3) {
+	case 0: /* 32-bit aligned */
+		p32 = (u32 *) data;
+		cbytes = (bytes & ~0x3);
+
+		/* Copy 32-bit aligned data first */
+		for (n = 0; n < cbytes; n += 4)
+			*p32++ = readl(USBD_RXDATA(udc->udp_baseaddr));
+
+		/* Handle any remaining bytes */
+		bl = bytes - cbytes;
+		if (bl) {
+			tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
+			for (n = 0; n < bl; n++)
+				data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF);
+
+		}
+		break;
+
+	case 1: /* 8-bit aligned */
+	case 3:
+		/* Each byte has to be handled independently */
+		for (n = 0; n < bytes; n += 4) {
+			tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
+
+			bl = bytes - n;
+			if (bl > 3)
+				bl = 3;
+
+			for (i = 0; i < bl; i++)
+				data[n + i] = (u8) ((tmp >> (n * 8)) & 0xFF);
+		}
+		break;
+
+	case 2: /* 16-bit aligned */
+		p16 = (u16 *) data;
+		cbytes = (bytes & ~0x3);
+
+		/* Copy 32-bit sized objects first with 16-bit alignment */
+		for (n = 0; n < cbytes; n += 4) {
+			tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
+			*p16++ = (u16)(tmp & 0xFFFF);
+			*p16++ = (u16)((tmp >> 16) & 0xFFFF);
+		}
+
+		/* Handle any remaining bytes */
+		bl = bytes - cbytes;
+		if (bl) {
+			tmp = readl(USBD_RXDATA(udc->udp_baseaddr));
+			for (n = 0; n < bl; n++)
+				data[cbytes + n] = ((tmp >> (n * 8)) & 0xFF);
+		}
+		break;
+	}
+}
+
+/* Read data from the FIFO for an endpoint. This function is for endpoints (such
+ * as EP0) that don't use DMA. This function should only be called if a packet
+ * is known to be ready to read for the endpoint. Note that the endpoint must
+ * be selected in the protocol engine prior to this call. */
+static u32 udc_read_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data,
+			 u32 bytes)
+{
+	u32 tmpv;
+	int to = 1000;
+	u32 tmp, hwrep = ((hwep & 0x1E) << 1) | CTRL_RD_EN;
+
+	/* Setup read of endpoint */
+	writel(hwrep, USBD_CTRL(udc->udp_baseaddr));
+
+	/* Wait until packet is ready */
+	while ((((tmpv = readl(USBD_RXPLEN(udc->udp_baseaddr))) &
+		 PKT_RDY) == 0)	&& (to > 0))
+		to--;
+	if (!to)
+		dev_dbg(udc->dev, "No packet ready on FIFO EP read\n");
+
+	/* Mask out count */
+	tmp = tmpv & PKT_LNGTH_MASK;
+	if (bytes < tmp)
+		tmp = bytes;
+
+	if ((tmp > 0) && (data != NULL))
+		udc_pop_fifo(udc, (u8 *) data, tmp);
+
+	writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr));
+
+	/* Clear the buffer */
+	udc_clr_buffer_hwep(udc, hwep);
+
+	return tmp;
+}
+
+/* Stuffs data into the FIFO, adjusts for alignment and data size */
+static void udc_stuff_fifo(struct lpc32xx_udc *udc, u8 *data, u32 bytes)
+{
+	int n, i, bl;
+	u16 *p16;
+	u32 *p32, tmp, cbytes;
+
+	/* Use optimal data transfer method based on source address and size */
+	switch (((u32) data) & 0x3) {
+	case 0: /* 32-bit aligned */
+		p32 = (u32 *) data;
+		cbytes = (bytes & ~0x3);
+
+		/* Copy 32-bit aligned data first */
+		for (n = 0; n < cbytes; n += 4)
+			writel(*p32++, USBD_TXDATA(udc->udp_baseaddr));
+
+		/* Handle any remaining bytes */
+		bl = bytes - cbytes;
+		if (bl) {
+			tmp = 0;
+			for (n = 0; n < bl; n++)
+				tmp |= data[cbytes + n] << (n * 8);
+
+			writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
+		}
+		break;
+
+	case 1: /* 8-bit aligned */
+	case 3:
+		/* Each byte has to be handled independently */
+		for (n = 0; n < bytes; n += 4) {
+			bl = bytes - n;
+			if (bl > 4)
+				bl = 4;
+
+			tmp = 0;
+			for (i = 0; i < bl; i++)
+				tmp |= data[n + i] << (i * 8);
+
+			writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
+		}
+		break;
+
+	case 2: /* 16-bit aligned */
+		p16 = (u16 *) data;
+		cbytes = (bytes & ~0x3);
+
+		/* Copy 32-bit aligned data first */
+		for (n = 0; n < cbytes; n += 4) {
+			tmp = *p16++ & 0xFFFF;
+			tmp |= (*p16++ & 0xFFFF) << 16;
+			writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
+		}
+
+		/* Handle any remaining bytes */
+		bl = bytes - cbytes;
+		if (bl) {
+			tmp = 0;
+			for (n = 0; n < bl; n++)
+				tmp |= data[cbytes + n] << (n * 8);
+
+			writel(tmp, USBD_TXDATA(udc->udp_baseaddr));
+		}
+		break;
+	}
+}
+
+/* Write data to the FIFO for an endpoint. This function is for endpoints (such
+ * as EP0) that don't use DMA. Note that the endpoint must be selected in the
+ * protocol engine prior to this call. */
+static void udc_write_hwep(struct lpc32xx_udc *udc, u32 hwep, u32 *data,
+			   u32 bytes)
+{
+	u32 hwwep = ((hwep & 0x1E) << 1) | CTRL_WR_EN;
+
+	if ((bytes > 0) && (data == NULL))
+		return;
+
+	/* Setup write of endpoint */
+	writel(hwwep, USBD_CTRL(udc->udp_baseaddr));
+
+	writel(bytes, USBD_TXPLEN(udc->udp_baseaddr));
+
+	/* Need at least 1 byte to trigger TX */
+	if (bytes == 0)
+		writel(0, USBD_TXDATA(udc->udp_baseaddr));
+	else
+		udc_stuff_fifo(udc, (u8 *) data, bytes);
+
+	writel(((hwep & 0x1E) << 1), USBD_CTRL(udc->udp_baseaddr));
+
+	udc_val_buffer_hwep(udc, hwep);
+}
+
+/* USB device reset - resets USB to a default state with just EP0
+   enabled */
+static void uda_usb_reset(struct lpc32xx_udc *udc)
+{
+	u32 i = 0;
+	/* Re-init device controller and EP0 */
+	udc_enable(udc);
+	udc->gadget.speed = USB_SPEED_FULL;
+
+	for (i = 1; i < NUM_ENDPOINTS; i++) {
+		struct lpc32xx_ep *ep = &udc->ep[i];
+		ep->req_pending = 0;
+	}
+}
+
+/* Send a ZLP on EP0 */
+static void udc_ep0_send_zlp(struct lpc32xx_udc *udc)
+{
+	udc_write_hwep(udc, EP_IN, NULL, 0);
+}
+
+/* Get current frame number */
+static u16 udc_get_current_frame(struct lpc32xx_udc *udc)
+{
+	u16 flo, fhi;
+
+	udc_protocol_cmd_w(udc, CMD_RD_FRAME);
+	flo = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME);
+	fhi = (u16) udc_protocol_cmd_r(udc, DAT_RD_FRAME);
+
+	return (fhi << 8) | flo;
+}
+
+/* Set the device as configured - enables all endpoints */
+static inline void udc_set_device_configured(struct lpc32xx_udc *udc)
+{
+	udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(CONF_DVICE));
+}
+
+/* Set the device as unconfigured - disables all endpoints */
+static inline void udc_set_device_unconfigured(struct lpc32xx_udc *udc)
+{
+	udc_protocol_cmd_data_w(udc, CMD_CFG_DEV, DAT_WR_BYTE(0));
+}
+
+/* reinit == restore initial software state */
+static void udc_reinit(struct lpc32xx_udc *udc)
+{
+	u32 i;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	INIT_LIST_HEAD(&udc->gadget.ep0->ep_list);
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		struct lpc32xx_ep *ep = &udc->ep[i];
+
+		if (i != 0)
+			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+		ep->desc = NULL;
+		ep->ep.maxpacket = ep->maxpacket;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->req_pending = 0;
+	}
+
+	udc->ep0state = WAIT_FOR_SETUP;
+}
+
+/* Must be called with lock */
+static void done(struct lpc32xx_ep *ep, struct lpc32xx_request *req, int status)
+{
+	struct lpc32xx_udc *udc = ep->udc;
+
+	list_del_init(&req->queue);
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (ep->lep) {
+		enum dma_data_direction direction;
+
+		if (ep->is_in)
+			direction = DMA_TO_DEVICE;
+		else
+			direction = DMA_FROM_DEVICE;
+
+		if (req->mapped) {
+			dma_unmap_single(ep->udc->gadget.dev.parent,
+					req->req.dma, req->req.length,
+					direction);
+			req->req.dma = 0;
+			req->mapped = 0;
+		} else
+			dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
+						req->req.dma, req->req.length,
+						direction);
+
+		/* Free DDs */
+		udc_dd_free(udc, req->dd_desc_ptr);
+	}
+
+	if (status && status != -ESHUTDOWN)
+		ep_dbg(ep, "%s done %p, status %d\n", ep->ep.name, req, status);
+
+	ep->req_pending = 0;
+	spin_unlock(&udc->lock);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&udc->lock);
+}
+
+/* Must be called with lock */
+static void nuke(struct lpc32xx_ep *ep, int status)
+{
+	struct lpc32xx_request *req;
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
+		done(ep, req, status);
+	}
+
+	if (ep->desc && status == -ESHUTDOWN) {
+		uda_disable_hwepint(ep->udc, ep->hwep_num);
+		udc_disable_hwep(ep->udc, ep->hwep_num);
+	}
+}
+
+/* IN endpoint 0 transfer */
+static int udc_ep0_in_req(struct lpc32xx_udc *udc)
+{
+	struct lpc32xx_request *req;
+	struct lpc32xx_ep *ep0 = &udc->ep[0];
+	u32 tsend, ts = 0;
+
+	if (list_empty(&ep0->queue))
+		/* Nothing to send */
+		return 0;
+	else
+		req = list_entry(ep0->queue.next, struct lpc32xx_request,
+				 queue);
+
+	tsend = ts = req->req.length - req->req.actual;
+	if (ts == 0) {
+		/* Send a ZLP */
+		udc_ep0_send_zlp(udc);
+		done(ep0, req, 0);
+		return 1;
+	} else if (ts > ep0->ep.maxpacket)
+		ts = ep0->ep.maxpacket; /* Just send what we can */
+
+	/* Write data to the EP0 FIFO and start transfer */
+	udc_write_hwep(udc, EP_IN, (req->req.buf + req->req.actual), ts);
+
+	/* Increment data pointer */
+	req->req.actual += ts;
+
+	if (tsend >= ep0->ep.maxpacket)
+		return 0; /* Stay in data transfer state */
+
+	/* Transfer request is complete */
+	udc->ep0state = WAIT_FOR_SETUP;
+	done(ep0, req, 0);
+	return 1;
+}
+
+/* OUT endpoint 0 transfer */
+static int udc_ep0_out_req(struct lpc32xx_udc *udc)
+{
+	struct lpc32xx_request *req;
+	struct lpc32xx_ep *ep0 = &udc->ep[0];
+	u32 tr, bufferspace;
+
+	if (list_empty(&ep0->queue))
+		return 0;
+	else
+		req = list_entry(ep0->queue.next, struct lpc32xx_request,
+				 queue);
+
+	if (req) {
+		if (req->req.length == 0) {
+			/* Just dequeue request */
+			done(ep0, req, 0);
+			udc->ep0state = WAIT_FOR_SETUP;
+			return 1;
+		}
+
+		/* Get data from FIFO */
+		bufferspace = req->req.length - req->req.actual;
+		if (bufferspace > ep0->ep.maxpacket)
+			bufferspace = ep0->ep.maxpacket;
+
+		/* Copy data to buffer */
+		prefetchw(req->req.buf + req->req.actual);
+		tr = udc_read_hwep(udc, EP_OUT, req->req.buf + req->req.actual,
+				   bufferspace);
+		req->req.actual += bufferspace;
+
+		if (tr < ep0->ep.maxpacket) {
+			/* This is the last packet */
+			done(ep0, req, 0);
+			udc->ep0state = WAIT_FOR_SETUP;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+/* Must be called with lock */
+static void stop_activity(struct lpc32xx_udc *udc)
+{
+	struct usb_gadget_driver *driver = udc->driver;
+	int i;
+
+	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->suspended = 0;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		struct lpc32xx_ep *ep = &udc->ep[i];
+		nuke(ep, -ESHUTDOWN);
+	}
+	if (driver) {
+		spin_unlock(&udc->lock);
+		driver->disconnect(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
+
+	isp1301_pullup_enable(udc, 0, 0);
+	udc_disable(udc);
+	udc_reinit(udc);
+}
+
+/*
+ * Activate or kill host pullup
+ * Can be called with or without lock
+ */
+static void pullup(struct lpc32xx_udc *udc, int is_on)
+{
+	if (!udc->clocked)
+		return;
+
+	if (!udc->enabled || !udc->vbus)
+		is_on = 0;
+
+	if (is_on != udc->pullup)
+		isp1301_pullup_enable(udc, is_on, 0);
+}
+
+/* Must be called without lock */
+static int lpc32xx_ep_disable(struct usb_ep *_ep)
+{
+	struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
+	struct lpc32xx_udc *udc = ep->udc;
+	unsigned long	flags;
+
+	if ((ep->hwep_num_base == 0) || (ep->hwep_num == 0))
+		return -EINVAL;
+	spin_lock_irqsave(&udc->lock, flags);
+
+	nuke(ep, -ESHUTDOWN);
+
+	/* restore the endpoint's pristine config */
+	ep->desc = NULL;
+
+	/* Clear all DMA statuses for this EP */
+	udc_ep_dma_disable(udc, ep->hwep_num);
+	writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr));
+
+	/* Remove the DD pointer in the UDCA */
+	udc->udca_v_base[ep->hwep_num] = 0;
+
+	/* Disable and reset endpoint and interrupt */
+	uda_clear_hwepint(udc, ep->hwep_num);
+	udc_unrealize_hwep(udc, ep->hwep_num);
+
+	ep->hwep_num = 0;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	atomic_dec(&udc->enabled_ep_cnt);
+	wake_up(&udc->ep_disable_wait_queue);
+
+	return 0;
+}
+
+/* Must be called without lock */
+static int lpc32xx_ep_enable(struct usb_ep *_ep,
+			     const struct usb_endpoint_descriptor *desc)
+{
+	struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
+	struct lpc32xx_udc *udc = ep->udc;
+	u16 maxpacket;
+	u32 tmp;
+	unsigned long flags;
+
+	/* Verify EP data */
+	if ((!_ep) || (!ep) || (!desc) || (ep->desc) ||
+	    (desc->bDescriptorType != USB_DT_ENDPOINT)) {
+		dev_dbg(udc->dev, "bad ep or descriptor\n");
+		return -EINVAL;
+	}
+	maxpacket = usb_endpoint_maxp(desc);
+	if ((maxpacket == 0) || (maxpacket > ep->maxpacket)) {
+		dev_dbg(udc->dev, "bad ep descriptor's packet size\n");
+		return -EINVAL;
+	}
+
+	/* Don't touch EP0 */
+	if (ep->hwep_num_base == 0) {
+		dev_dbg(udc->dev, "Can't re-enable EP0!!!\n");
+		return -EINVAL;
+	}
+
+	/* Is driver ready? */
+	if ((!udc->driver) || (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
+		dev_dbg(udc->dev, "bogus device state\n");
+		return -ESHUTDOWN;
+	}
+
+	tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	switch (tmp) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		return -EINVAL;
+
+	case USB_ENDPOINT_XFER_INT:
+		if (maxpacket > ep->maxpacket) {
+			dev_dbg(udc->dev,
+				"Bad INT endpoint maxpacket %d\n", maxpacket);
+			return -EINVAL;
+		}
+		break;
+
+	case USB_ENDPOINT_XFER_BULK:
+		switch (maxpacket) {
+		case 8:
+		case 16:
+		case 32:
+		case 64:
+			break;
+
+		default:
+			dev_dbg(udc->dev,
+				"Bad BULK endpoint maxpacket %d\n", maxpacket);
+			return -EINVAL;
+		}
+		break;
+
+	case USB_ENDPOINT_XFER_ISOC:
+		break;
+	}
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Initialize endpoint to match the selected descriptor */
+	ep->is_in = (desc->bEndpointAddress & USB_DIR_IN) != 0;
+	ep->desc = desc;
+	ep->ep.maxpacket = maxpacket;
+
+	/* Map hardware endpoint from base and direction */
+	if (ep->is_in)
+		/* IN endpoints are offset 1 from the OUT endpoint */
+		ep->hwep_num = ep->hwep_num_base + EP_IN;
+	else
+		ep->hwep_num = ep->hwep_num_base;
+
+	ep_dbg(ep, "EP enabled: %s, HW:%d, MP:%d IN:%d\n", ep->ep.name,
+	       ep->hwep_num, maxpacket, (ep->is_in == 1));
+
+	/* Realize the endpoint, interrupt is enabled later when
+	 * buffers are queued, IN EPs will NAK until buffers are ready */
+	udc_realize_hwep(udc, ep->hwep_num, ep->ep.maxpacket);
+	udc_clr_buffer_hwep(udc, ep->hwep_num);
+	uda_disable_hwepint(udc, ep->hwep_num);
+	udc_clrstall_hwep(udc, ep->hwep_num);
+
+	/* Clear all DMA statuses for this EP */
+	udc_ep_dma_disable(udc, ep->hwep_num);
+	writel(1 << ep->hwep_num, USBD_EOTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_NDDRTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_SYSERRTINTCLR(udc->udp_baseaddr));
+	writel(1 << ep->hwep_num, USBD_DMARCLR(udc->udp_baseaddr));
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	atomic_inc(&udc->enabled_ep_cnt);
+	return 0;
+}
+
+/*
+ * Allocate a USB request list
+ * Can be called with or without lock
+ */
+static struct usb_request *lpc32xx_ep_alloc_request(struct usb_ep *_ep,
+						    gfp_t gfp_flags)
+{
+	struct lpc32xx_request *req;
+
+	req = kzalloc(sizeof(struct lpc32xx_request), gfp_flags);
+	if (!req)
+		return NULL;
+
+	INIT_LIST_HEAD(&req->queue);
+	return &req->req;
+}
+
+/*
+ * De-allocate a USB request list
+ * Can be called with or without lock
+ */
+static void lpc32xx_ep_free_request(struct usb_ep *_ep,
+				    struct usb_request *_req)
+{
+	struct lpc32xx_request *req;
+
+	req = container_of(_req, struct lpc32xx_request, req);
+	BUG_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+/* Must be called without lock */
+static int lpc32xx_ep_queue(struct usb_ep *_ep,
+			    struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct lpc32xx_request *req;
+	struct lpc32xx_ep *ep;
+	struct lpc32xx_udc *udc;
+	unsigned long flags;
+	int status = 0;
+
+	req = container_of(_req, struct lpc32xx_request, req);
+	ep = container_of(_ep, struct lpc32xx_ep, ep);
+
+	if (!_req || !_req->complete || !_req->buf ||
+	    !list_empty(&req->queue))
+		return -EINVAL;
+
+	udc = ep->udc;
+
+	if (!_ep || (!ep->desc && ep->hwep_num_base != 0)) {
+		dev_dbg(udc->dev, "invalid ep\n");
+		return -EINVAL;
+	}
+
+
+	if ((!udc) || (!udc->driver) ||
+	    (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
+		dev_dbg(udc->dev, "invalid device\n");
+		return -EINVAL;
+	}
+
+	if (ep->lep) {
+		enum dma_data_direction direction;
+		struct lpc32xx_usbd_dd_gad *dd;
+
+		/* Map DMA pointer */
+		if (ep->is_in)
+			direction = DMA_TO_DEVICE;
+		else
+			direction = DMA_FROM_DEVICE;
+
+		if (req->req.dma == 0) {
+			req->req.dma = dma_map_single(
+				ep->udc->gadget.dev.parent,
+				req->req.buf, req->req.length, direction);
+			req->mapped = 1;
+		} else {
+			dma_sync_single_for_device(
+				ep->udc->gadget.dev.parent, req->req.dma,
+				req->req.length, direction);
+			req->mapped = 0;
+		}
+
+		/* For the request, build a list of DDs */
+		dd = udc_dd_alloc(udc);
+		if (!dd) {
+			/* Error allocating DD */
+			return -ENOMEM;
+		}
+		req->dd_desc_ptr = dd;
+
+		/* Setup the DMA descriptor */
+		dd->dd_next_phy = dd->dd_next_v = 0;
+		dd->dd_buffer_addr = req->req.dma;
+		dd->dd_status = 0;
+
+		/* Special handling for ISO EPs */
+		if (ep->eptype == EP_ISO_TYPE) {
+			dd->dd_setup = DD_SETUP_ISO_EP |
+				DD_SETUP_PACKETLEN(0) |
+				DD_SETUP_DMALENBYTES(1);
+			dd->dd_iso_ps_mem_addr = dd->this_dma + 24;
+			if (ep->is_in)
+				dd->iso_status[0] = req->req.length;
+			else
+				dd->iso_status[0] = 0;
+		} else
+			dd->dd_setup = DD_SETUP_PACKETLEN(ep->ep.maxpacket) |
+				DD_SETUP_DMALENBYTES(req->req.length);
+	}
+
+	ep_dbg(ep, "%s queue req %p len %d buf %p (in=%d) z=%d\n", _ep->name,
+	       _req, _req->length, _req->buf, ep->is_in, _req->zero);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+	req->send_zlp = _req->zero;
+
+	/* Kickstart empty queues */
+	if (list_empty(&ep->queue)) {
+		list_add_tail(&req->queue, &ep->queue);
+
+		if (ep->hwep_num_base == 0) {
+			/* Handle expected data direction */
+			if (ep->is_in) {
+				/* IN packet to host */
+				udc->ep0state = DATA_IN;
+				status = udc_ep0_in_req(udc);
+			} else {
+				/* OUT packet from host */
+				udc->ep0state = DATA_OUT;
+				status = udc_ep0_out_req(udc);
+			}
+		} else if (ep->is_in) {
+			/* IN packet to host and kick off transfer */
+			if (!ep->req_pending)
+				udc_ep_in_req_dma(udc, ep);
+		} else
+			/* OUT packet from host and kick off list */
+			if (!ep->req_pending)
+				udc_ep_out_req_dma(udc, ep);
+	} else
+		list_add_tail(&req->queue, &ep->queue);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return (status < 0) ? status : 0;
+}
+
+/* Must be called without lock */
+static int lpc32xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct lpc32xx_ep *ep;
+	struct lpc32xx_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct lpc32xx_ep, ep);
+	if (!_ep || ep->hwep_num_base == 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req) {
+		spin_unlock_irqrestore(&ep->udc->lock, flags);
+		return -EINVAL;
+	}
+
+	done(ep, req, -ECONNRESET);
+
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+	return 0;
+}
+
+/* Must be called without lock */
+static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
+	struct lpc32xx_udc *udc = ep->udc;
+	unsigned long flags;
+
+	if ((!ep) || (ep->desc == NULL) || (ep->hwep_num <= 1))
+		return -EINVAL;
+
+	/* Don't halt an IN EP */
+	if (ep->is_in)
+		return -EAGAIN;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (value == 1) {
+		/* stall */
+		udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num),
+					DAT_WR_BYTE(EP_STAT_ST));
+	} else {
+		/* End stall */
+		ep->wedge = 0;
+		udc_protocol_cmd_data_w(udc, CMD_SET_EP_STAT(ep->hwep_num),
+					DAT_WR_BYTE(0));
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/* set the halt feature and ignores clear requests */
+static int lpc32xx_ep_set_wedge(struct usb_ep *_ep)
+{
+	struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep);
+
+	if (!_ep || !ep->udc)
+		return -EINVAL;
+
+	ep->wedge = 1;
+
+	return usb_ep_set_halt(_ep);
+}
+
+static const struct usb_ep_ops lpc32xx_ep_ops = {
+	.enable		= lpc32xx_ep_enable,
+	.disable	= lpc32xx_ep_disable,
+	.alloc_request	= lpc32xx_ep_alloc_request,
+	.free_request	= lpc32xx_ep_free_request,
+	.queue		= lpc32xx_ep_queue,
+	.dequeue	= lpc32xx_ep_dequeue,
+	.set_halt	= lpc32xx_ep_set_halt,
+	.set_wedge	= lpc32xx_ep_set_wedge,
+};
+
+/* Send a ZLP on a non-0 IN EP */
+void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+{
+	/* Clear EP status */
+	udc_clearep_getsts(udc, ep->hwep_num);
+
+	/* Send ZLP via FIFO mechanism */
+	udc_write_hwep(udc, ep->hwep_num, NULL, 0);
+}
+
+/*
+ * Handle EP completion for ZLP
+ * This function will only be called when a delayed ZLP needs to be sent out
+ * after a DMA transfer has filled both buffers.
+ */
+void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+{
+	u32 epstatus;
+	struct lpc32xx_request *req;
+
+	if (ep->hwep_num <= 0)
+		return;
+
+	uda_clear_hwepint(udc, ep->hwep_num);
+
+	/* If this interrupt isn't enabled, return now */
+	if (!(udc->enabled_hwepints & (1 << ep->hwep_num)))
+		return;
+
+	/* Get endpoint status */
+	epstatus = udc_clearep_getsts(udc, ep->hwep_num);
+
+	/*
+	 * This should never happen, but protect against writing to the
+	 * buffer when full.
+	 */
+	if (epstatus & EP_SEL_F)
+		return;
+
+	if (ep->is_in) {
+		udc_send_in_zlp(udc, ep);
+		uda_disable_hwepint(udc, ep->hwep_num);
+	} else
+		return;
+
+	/* If there isn't a request waiting, something went wrong */
+	req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
+	if (req) {
+		done(ep, req, 0);
+
+		/* Start another request if ready */
+		if (!list_empty(&ep->queue)) {
+			if (ep->is_in)
+				udc_ep_in_req_dma(udc, ep);
+			else
+				udc_ep_out_req_dma(udc, ep);
+		} else
+			ep->req_pending = 0;
+	}
+}
+
+
+/* DMA end of transfer completion */
+static void udc_handle_dma_ep(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
+{
+	u32 status, epstatus;
+	struct lpc32xx_request *req;
+	struct lpc32xx_usbd_dd_gad *dd;
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	ep->totalints++;
+#endif
+
+	req = list_entry(ep->queue.next, struct lpc32xx_request, queue);
+	if (!req) {
+		ep_err(ep, "DMA interrupt on no req!\n");
+		return;
+	}
+	dd = req->dd_desc_ptr;
+
+	/* DMA descriptor should always be retired for this call */
+	if (!(dd->dd_status & DD_STATUS_DD_RETIRED))
+		ep_warn(ep, "DMA descriptor did not retire\n");
+
+	/* Disable DMA */
+	udc_ep_dma_disable(udc, ep->hwep_num);
+	writel((1 << ep->hwep_num), USBD_EOTINTCLR(udc->udp_baseaddr));
+	writel((1 << ep->hwep_num), USBD_NDDRTINTCLR(udc->udp_baseaddr));
+
+	/* System error? */
+	if (readl(USBD_SYSERRTINTST(udc->udp_baseaddr)) &
+	    (1 << ep->hwep_num)) {
+		writel((1 << ep->hwep_num),
+			     USBD_SYSERRTINTCLR(udc->udp_baseaddr));
+		ep_err(ep, "AHB critical error!\n");
+		ep->req_pending = 0;
+
+		/* The error could have occurred on a packet of a multipacket
+		 * transfer, so recovering the transfer is not possible. Close
+		 * the request with an error */
+		done(ep, req, -ECONNABORTED);
+		return;
+	}
+
+	/* Handle the current DD's status */
+	status = dd->dd_status;
+	switch (status & DD_STATUS_STS_MASK) {
+	case DD_STATUS_STS_NS:
+		/* DD not serviced? This shouldn't happen! */
+		ep->req_pending = 0;
+		ep_err(ep, "DMA critical EP error: DD not serviced (0x%x)!\n",
+		       status);
+
+		done(ep, req, -ECONNABORTED);
+		return;
+
+	case DD_STATUS_STS_BS:
+		/* Interrupt only fires on EOT - This shouldn't happen! */
+		ep->req_pending = 0;
+		ep_err(ep, "DMA critical EP error: EOT prior to service completion (0x%x)!\n",
+		       status);
+		done(ep, req, -ECONNABORTED);
+		return;
+
+	case DD_STATUS_STS_NC:
+	case DD_STATUS_STS_DUR:
+		/* Really just a short packet, not an underrun */
+		/* This is a good status and what we expect */
+		break;
+
+	default:
+		/* Data overrun, system error, or unknown */
+		ep->req_pending = 0;
+		ep_err(ep, "DMA critical EP error: System error (0x%x)!\n",
+		       status);
+		done(ep, req, -ECONNABORTED);
+		return;
+	}
+
+	/* ISO endpoints are handled differently */
+	if (ep->eptype == EP_ISO_TYPE) {
+		if (ep->is_in)
+			req->req.actual = req->req.length;
+		else
+			req->req.actual = dd->iso_status[0] & 0xFFFF;
+	} else
+		req->req.actual += DD_STATUS_CURDMACNT(status);
+
+	/* Send a ZLP if necessary. This will be done for non-int
+	 * packets which have a size that is a divisor of MAXP */
+	if (req->send_zlp) {
+		/*
+		 * If at least 1 buffer is available, send the ZLP now.
+		 * Otherwise, the ZLP send needs to be deferred until a
+		 * buffer is available.
+		 */
+		if (udc_clearep_getsts(udc, ep->hwep_num) & EP_SEL_F) {
+			udc_clearep_getsts(udc, ep->hwep_num);
+			uda_enable_hwepint(udc, ep->hwep_num);
+			epstatus = udc_clearep_getsts(udc, ep->hwep_num);
+
+			/* Let the EP interrupt handle the ZLP */
+			return;
+		} else
+			udc_send_in_zlp(udc, ep);
+	}
+
+	/* Transfer request is complete */
+	done(ep, req, 0);
+
+	/* Start another request if ready */
+	udc_clearep_getsts(udc, ep->hwep_num);
+	if (!list_empty((&ep->queue))) {
+		if (ep->is_in)
+			udc_ep_in_req_dma(udc, ep);
+		else
+			udc_ep_out_req_dma(udc, ep);
+	} else
+		ep->req_pending = 0;
+
+}
+
+/*
+ *
+ * Endpoint 0 functions
+ *
+ */
+static void udc_handle_dev(struct lpc32xx_udc *udc)
+{
+	u32 tmp;
+
+	udc_protocol_cmd_w(udc, CMD_GET_DEV_STAT);
+	tmp = udc_protocol_cmd_r(udc, DAT_GET_DEV_STAT);
+
+	if (tmp & DEV_RST)
+		uda_usb_reset(udc);
+	else if (tmp & DEV_CON_CH)
+		uda_power_event(udc, (tmp & DEV_CON));
+	else if (tmp & DEV_SUS_CH) {
+		if (tmp & DEV_SUS) {
+			if (udc->vbus == 0)
+				stop_activity(udc);
+			else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) &&
+				 udc->driver) {
+				/* Power down transceiver */
+				udc->poweron = 0;
+				schedule_work(&udc->pullup_job);
+				uda_resm_susp_event(udc, 1);
+			}
+		} else if ((udc->gadget.speed != USB_SPEED_UNKNOWN) &&
+			   udc->driver && udc->vbus) {
+			uda_resm_susp_event(udc, 0);
+			/* Power up transceiver */
+			udc->poweron = 1;
+			schedule_work(&udc->pullup_job);
+		}
+	}
+}
+
+static int udc_get_status(struct lpc32xx_udc *udc, u16 reqtype, u16 wIndex)
+{
+	struct lpc32xx_ep *ep;
+	u32 ep0buff = 0, tmp;
+
+	switch (reqtype & USB_RECIP_MASK) {
+	case USB_RECIP_INTERFACE:
+		break; /* Not supported */
+
+	case USB_RECIP_DEVICE:
+		ep0buff = (udc->selfpowered << USB_DEVICE_SELF_POWERED);
+		if (udc->dev_status & (1 << USB_DEVICE_REMOTE_WAKEUP))
+			ep0buff |= (1 << USB_DEVICE_REMOTE_WAKEUP);
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		tmp = wIndex & USB_ENDPOINT_NUMBER_MASK;
+		ep = &udc->ep[tmp];
+		if ((tmp == 0) || (tmp >= NUM_ENDPOINTS) || (tmp && !ep->desc))
+			return -EOPNOTSUPP;
+
+		if (wIndex & USB_DIR_IN) {
+			if (!ep->is_in)
+				return -EOPNOTSUPP; /* Something's wrong */
+		} else if (ep->is_in)
+			return -EOPNOTSUPP; /* Not an IN endpoint */
+
+		/* Get status of the endpoint */
+		udc_protocol_cmd_w(udc, CMD_SEL_EP(ep->hwep_num));
+		tmp = udc_protocol_cmd_r(udc, DAT_SEL_EP(ep->hwep_num));
+
+		if (tmp & EP_SEL_ST)
+			ep0buff = (1 << USB_ENDPOINT_HALT);
+		else
+			ep0buff = 0;
+		break;
+
+	default:
+		break;
+	}
+
+	/* Return data */
+	udc_write_hwep(udc, EP_IN, &ep0buff, 2);
+
+	return 0;
+}
+
+static void udc_handle_ep0_setup(struct lpc32xx_udc *udc)
+{
+	struct lpc32xx_ep *ep, *ep0 = &udc->ep[0];
+	struct usb_ctrlrequest ctrlpkt;
+	int i, bytes;
+	u16 wIndex, wValue, wLength, reqtype, req, tmp;
+
+	/* Nuke previous transfers */
+	nuke(ep0, -EPROTO);
+
+	/* Get setup packet */
+	bytes = udc_read_hwep(udc, EP_OUT, (u32 *) &ctrlpkt, 8);
+	if (bytes != 8) {
+		ep_warn(ep0, "Incorrectly sized setup packet (s/b 8, is %d)!\n",
+			bytes);
+		return;
+	}
+
+	/* Native endianness */
+	wIndex = le16_to_cpu(ctrlpkt.wIndex);
+	wValue = le16_to_cpu(ctrlpkt.wValue);
+	wLength = le16_to_cpu(ctrlpkt.wLength);
+	reqtype = le16_to_cpu(ctrlpkt.bRequestType);
+
+	/* Set direction of EP0 */
+	if (likely(reqtype & USB_DIR_IN))
+		ep0->is_in = 1;
+	else
+		ep0->is_in = 0;
+
+	/* Handle SETUP packet */
+	req = le16_to_cpu(ctrlpkt.bRequest);
+	switch (req) {
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		switch (reqtype) {
+		case (USB_TYPE_STANDARD | USB_RECIP_DEVICE):
+			if (wValue != USB_DEVICE_REMOTE_WAKEUP)
+				goto stall; /* Nothing else handled */
+
+			/* Tell board about event */
+			if (req == USB_REQ_CLEAR_FEATURE)
+				udc->dev_status &=
+					~(1 << USB_DEVICE_REMOTE_WAKEUP);
+			else
+				udc->dev_status |=
+					(1 << USB_DEVICE_REMOTE_WAKEUP);
+			uda_remwkp_cgh(udc);
+			goto zlp_send;
+
+		case (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT):
+			tmp = wIndex & USB_ENDPOINT_NUMBER_MASK;
+			if ((wValue != USB_ENDPOINT_HALT) ||
+			    (tmp >= NUM_ENDPOINTS))
+				break;
+
+			/* Find hardware endpoint from logical endpoint */
+			ep = &udc->ep[tmp];
+			tmp = ep->hwep_num;
+			if (tmp == 0)
+				break;
+
+			if (req == USB_REQ_SET_FEATURE)
+				udc_stall_hwep(udc, tmp);
+			else if (!ep->wedge)
+				udc_clrstall_hwep(udc, tmp);
+
+			goto zlp_send;
+
+		default:
+			break;
+		}
+
+
+	case USB_REQ_SET_ADDRESS:
+		if (reqtype == (USB_TYPE_STANDARD | USB_RECIP_DEVICE)) {
+			udc_set_address(udc, wValue);
+			goto zlp_send;
+		}
+		break;
+
+	case USB_REQ_GET_STATUS:
+		udc_get_status(udc, reqtype, wIndex);
+		return;
+
+	default:
+		break; /* Let GadgetFS handle the descriptor instead */
+	}
+
+	if (likely(udc->driver)) {
+		/* device-2-host (IN) or no data setup command, process
+		 * immediately */
+		spin_unlock(&udc->lock);
+		i = udc->driver->setup(&udc->gadget, &ctrlpkt);
+
+		spin_lock(&udc->lock);
+		if (req == USB_REQ_SET_CONFIGURATION) {
+			/* Configuration is set after endpoints are realized */
+			if (wValue) {
+				/* Set configuration */
+				udc_set_device_configured(udc);
+
+				udc_protocol_cmd_data_w(udc, CMD_SET_MODE,
+							DAT_WR_BYTE(AP_CLK |
+							INAK_BI | INAK_II));
+			} else {
+				/* Clear configuration */
+				udc_set_device_unconfigured(udc);
+
+				/* Disable NAK interrupts */
+				udc_protocol_cmd_data_w(udc, CMD_SET_MODE,
+							DAT_WR_BYTE(AP_CLK));
+			}
+		}
+
+		if (i < 0) {
+			/* setup processing failed, force stall */
+			dev_err(udc->dev,
+				"req %02x.%02x protocol STALL; stat %d\n",
+				reqtype, req, i);
+			udc->ep0state = WAIT_FOR_SETUP;
+			goto stall;
+		}
+	}
+
+	if (!ep0->is_in)
+		udc_ep0_send_zlp(udc); /* ZLP IN packet on data phase */
+
+	return;
+
+stall:
+	udc_stall_hwep(udc, EP_IN);
+	return;
+
+zlp_send:
+	udc_ep0_send_zlp(udc);
+	return;
+}
+
+/* IN endpoint 0 transfer */
+static void udc_handle_ep0_in(struct lpc32xx_udc *udc)
+{
+	struct lpc32xx_ep *ep0 = &udc->ep[0];
+	u32 epstatus;
+
+	/* Clear EP interrupt */
+	epstatus = udc_clearep_getsts(udc, EP_IN);
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	ep0->totalints++;
+#endif
+
+	/* Stalled? Clear stall and reset buffers */
+	if (epstatus & EP_SEL_ST) {
+		udc_clrstall_hwep(udc, EP_IN);
+		nuke(ep0, -ECONNABORTED);
+		udc->ep0state = WAIT_FOR_SETUP;
+		return;
+	}
+
+	/* Is a buffer available? */
+	if (!(epstatus & EP_SEL_F)) {
+		/* Handle based on current state */
+		if (udc->ep0state == DATA_IN)
+			udc_ep0_in_req(udc);
+		else {
+			/* Unknown state for EP0 oe end of DATA IN phase */
+			nuke(ep0, -ECONNABORTED);
+			udc->ep0state = WAIT_FOR_SETUP;
+		}
+	}
+}
+
+/* OUT endpoint 0 transfer */
+static void udc_handle_ep0_out(struct lpc32xx_udc *udc)
+{
+	struct lpc32xx_ep *ep0 = &udc->ep[0];
+	u32 epstatus;
+
+	/* Clear EP interrupt */
+	epstatus = udc_clearep_getsts(udc, EP_OUT);
+
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	ep0->totalints++;
+#endif
+
+	/* Stalled? */
+	if (epstatus & EP_SEL_ST) {
+		udc_clrstall_hwep(udc, EP_OUT);
+		nuke(ep0, -ECONNABORTED);
+		udc->ep0state = WAIT_FOR_SETUP;
+		return;
+	}
+
+	/* A NAK may occur if a packet couldn't be received yet */
+	if (epstatus & EP_SEL_EPN)
+		return;
+	/* Setup packet incoming? */
+	if (epstatus & EP_SEL_STP) {
+		nuke(ep0, 0);
+		udc->ep0state = WAIT_FOR_SETUP;
+	}
+
+	/* Data available? */
+	if (epstatus & EP_SEL_F)
+		/* Handle based on current state */
+		switch (udc->ep0state) {
+		case WAIT_FOR_SETUP:
+			udc_handle_ep0_setup(udc);
+			break;
+
+		case DATA_OUT:
+			udc_ep0_out_req(udc);
+			break;
+
+		default:
+			/* Unknown state for EP0 */
+			nuke(ep0, -ECONNABORTED);
+			udc->ep0state = WAIT_FOR_SETUP;
+		}
+}
+
+/* Must be called without lock */
+static int lpc32xx_get_frame(struct usb_gadget *gadget)
+{
+	int frame;
+	unsigned long flags;
+	struct lpc32xx_udc *udc = to_udc(gadget);
+
+	if (!udc->clocked)
+		return -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	frame = (int) udc_get_current_frame(udc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return frame;
+}
+
+static int lpc32xx_wakeup(struct usb_gadget *gadget)
+{
+	return -ENOTSUPP;
+}
+
+static int lpc32xx_set_selfpowered(struct usb_gadget *gadget, int is_on)
+{
+	struct lpc32xx_udc *udc = to_udc(gadget);
+
+	/* Always self-powered */
+	udc->selfpowered = (is_on != 0);
+
+	return 0;
+}
+
+/*
+ * vbus is here!  turn everything on that's ready
+ * Must be called without lock
+ */
+static int lpc32xx_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	unsigned long flags;
+	struct lpc32xx_udc *udc = to_udc(gadget);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Doesn't need lock */
+	if (udc->driver) {
+		udc_clk_set(udc, 1);
+		udc_enable(udc);
+		pullup(udc, is_active);
+	} else {
+		stop_activity(udc);
+		pullup(udc, 0);
+
+		spin_unlock_irqrestore(&udc->lock, flags);
+		/*
+		 *  Wait for all the endpoints to disable,
+		 *  before disabling clocks. Don't wait if
+		 *  endpoints are not enabled.
+		 */
+		if (atomic_read(&udc->enabled_ep_cnt))
+			wait_event_interruptible(udc->ep_disable_wait_queue,
+				 (atomic_read(&udc->enabled_ep_cnt) == 0));
+
+		spin_lock_irqsave(&udc->lock, flags);
+
+		udc_clk_set(udc, 0);
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/* Can be called with or without lock */
+static int lpc32xx_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct lpc32xx_udc *udc = to_udc(gadget);
+
+	/* Doesn't need lock */
+	pullup(udc, is_on);
+
+	return 0;
+}
+
+static int lpc32xx_start(struct usb_gadget_driver *driver,
+			 int (*bind)(struct usb_gadget *));
+static int lpc32xx_stop(struct usb_gadget_driver *driver);
+
+static const struct usb_gadget_ops lpc32xx_udc_ops = {
+	.get_frame		= lpc32xx_get_frame,
+	.wakeup			= lpc32xx_wakeup,
+	.set_selfpowered	= lpc32xx_set_selfpowered,
+	.vbus_session		= lpc32xx_vbus_session,
+	.pullup			= lpc32xx_pullup,
+	.start			= lpc32xx_start,
+	.stop			= lpc32xx_stop,
+};
+
+static void nop_release(struct device *dev)
+{
+	/* nothing to free */
+}
+
+static struct lpc32xx_udc controller = {
+	.gadget = {
+		.ops	= &lpc32xx_udc_ops,
+		.ep0	= &controller.ep[0].ep,
+		.name	= driver_name,
+		.dev	= {
+			.init_name = "gadget",
+			.release = nop_release,
+		}
+	},
+	.ep[0] = {
+		.ep = {
+			.name	= "ep0",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 0,
+		.hwep_num	= 0, /* Can be 0 or 1, has special handling */
+		.lep		= 0,
+		.eptype		= EP_CTL_TYPE,
+	},
+	.ep[1] = {
+		.ep = {
+			.name	= "ep1-int",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 2,
+		.hwep_num	= 0, /* 2 or 3, will be set later */
+		.lep		= 1,
+		.eptype		= EP_INT_TYPE,
+	},
+	.ep[2] = {
+		.ep = {
+			.name	= "ep2-bulk",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 4,
+		.hwep_num	= 0, /* 4 or 5, will be set later */
+		.lep		= 2,
+		.eptype		= EP_BLK_TYPE,
+	},
+	.ep[3] = {
+		.ep = {
+			.name	= "ep3-iso",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 1023,
+		.hwep_num_base	= 6,
+		.hwep_num	= 0, /* 6 or 7, will be set later */
+		.lep		= 3,
+		.eptype		= EP_ISO_TYPE,
+	},
+	.ep[4] = {
+		.ep = {
+			.name	= "ep4-int",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 8,
+		.hwep_num	= 0, /* 8 or 9, will be set later */
+		.lep		= 4,
+		.eptype		= EP_INT_TYPE,
+	},
+	.ep[5] = {
+		.ep = {
+			.name	= "ep5-bulk",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 10,
+		.hwep_num	= 0, /* 10 or 11, will be set later */
+		.lep		= 5,
+		.eptype		= EP_BLK_TYPE,
+	},
+	.ep[6] = {
+		.ep = {
+			.name	= "ep6-iso",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 1023,
+		.hwep_num_base	= 12,
+		.hwep_num	= 0, /* 12 or 13, will be set later */
+		.lep		= 6,
+		.eptype		= EP_ISO_TYPE,
+	},
+	.ep[7] = {
+		.ep = {
+			.name	= "ep7-int",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 14,
+		.hwep_num	= 0,
+		.lep		= 7,
+		.eptype		= EP_INT_TYPE,
+	},
+	.ep[8] = {
+		.ep = {
+			.name	= "ep8-bulk",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 16,
+		.hwep_num	= 0,
+		.lep		= 8,
+		.eptype		= EP_BLK_TYPE,
+	},
+	.ep[9] = {
+		.ep = {
+			.name	= "ep9-iso",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 1023,
+		.hwep_num_base	= 18,
+		.hwep_num	= 0,
+		.lep		= 9,
+		.eptype		= EP_ISO_TYPE,
+	},
+	.ep[10] = {
+		.ep = {
+			.name	= "ep10-int",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 20,
+		.hwep_num	= 0,
+		.lep		= 10,
+		.eptype		= EP_INT_TYPE,
+	},
+	.ep[11] = {
+		.ep = {
+			.name	= "ep11-bulk",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 22,
+		.hwep_num	= 0,
+		.lep		= 11,
+		.eptype		= EP_BLK_TYPE,
+	},
+	.ep[12] = {
+		.ep = {
+			.name	= "ep12-iso",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 1023,
+		.hwep_num_base	= 24,
+		.hwep_num	= 0,
+		.lep		= 12,
+		.eptype		= EP_ISO_TYPE,
+	},
+	.ep[13] = {
+		.ep = {
+			.name	= "ep13-int",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 26,
+		.hwep_num	= 0,
+		.lep		= 13,
+		.eptype		= EP_INT_TYPE,
+	},
+	.ep[14] = {
+		.ep = {
+			.name	= "ep14-bulk",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 64,
+		.hwep_num_base	= 28,
+		.hwep_num	= 0,
+		.lep		= 14,
+		.eptype		= EP_BLK_TYPE,
+	},
+	.ep[15] = {
+		.ep = {
+			.name	= "ep15-bulk",
+			.ops	= &lpc32xx_ep_ops,
+		},
+		.udc		= &controller,
+		.maxpacket	= 1023,
+		.hwep_num_base	= 30,
+		.hwep_num	= 0,
+		.lep		= 15,
+		.eptype		= EP_BLK_TYPE,
+	},
+};
+
+/* ISO and status interrupts */
+static irqreturn_t lpc32xx_usb_lp_irq(int irq, void *_udc)
+{
+	u32 tmp, devstat;
+	struct lpc32xx_udc *udc = _udc;
+
+	spin_lock(&udc->lock);
+
+	/* Read the device status register */
+	devstat = readl(USBD_DEVINTST(udc->udp_baseaddr));
+
+	devstat &= ~USBD_EP_FAST;
+	writel(devstat, USBD_DEVINTCLR(udc->udp_baseaddr));
+	devstat = devstat & udc->enabled_devints;
+
+	/* Device specific handling needed? */
+	if (devstat & USBD_DEV_STAT)
+		udc_handle_dev(udc);
+
+	/* Start of frame? (devstat & FRAME_INT):
+	 * The frame interrupt isn't really needed for ISO support,
+	 * as the driver will queue the necessary packets */
+
+	/* Error? */
+	if (devstat & ERR_INT) {
+		/* All types of errors, from cable removal during transfer to
+		 * misc protocol and bit errors. These are mostly for just info,
+		 * as the USB hardware will work around these. If these errors
+		 * happen alot, something is wrong. */
+		udc_protocol_cmd_w(udc, CMD_RD_ERR_STAT);
+		tmp = udc_protocol_cmd_r(udc, DAT_RD_ERR_STAT);
+		dev_dbg(udc->dev, "Device error (0x%x)!\n", tmp);
+	}
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* EP interrupts */
+static irqreturn_t lpc32xx_usb_hp_irq(int irq, void *_udc)
+{
+	u32 tmp;
+	struct lpc32xx_udc *udc = _udc;
+
+	spin_lock(&udc->lock);
+
+	/* Read the device status register */
+	writel(USBD_EP_FAST, USBD_DEVINTCLR(udc->udp_baseaddr));
+
+	/* Endpoints */
+	tmp = readl(USBD_EPINTST(udc->udp_baseaddr));
+
+	/* Special handling for EP0 */
+	if (tmp & (EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) {
+		/* Handle EP0 IN */
+		if (tmp & (EP_MASK_SEL(0, EP_IN)))
+			udc_handle_ep0_in(udc);
+
+		/* Handle EP0 OUT */
+		if (tmp & (EP_MASK_SEL(0, EP_OUT)))
+			udc_handle_ep0_out(udc);
+	}
+
+	/* All other EPs */
+	if (tmp & ~(EP_MASK_SEL(0, EP_OUT) | EP_MASK_SEL(0, EP_IN))) {
+		int i;
+
+		/* Handle other EP interrupts */
+		for (i = 1; i < NUM_ENDPOINTS; i++) {
+			if (tmp & (1 << udc->ep[i].hwep_num))
+				udc_handle_eps(udc, &udc->ep[i]);
+		}
+	}
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t lpc32xx_usb_devdma_irq(int irq, void *_udc)
+{
+	struct lpc32xx_udc *udc = _udc;
+
+	int i;
+	u32 tmp;
+
+	spin_lock(&udc->lock);
+
+	/* Handle EP DMA EOT interrupts */
+	tmp = readl(USBD_EOTINTST(udc->udp_baseaddr)) |
+		(readl(USBD_EPDMAST(udc->udp_baseaddr)) &
+		 readl(USBD_NDDRTINTST(udc->udp_baseaddr))) |
+		readl(USBD_SYSERRTINTST(udc->udp_baseaddr));
+	for (i = 1; i < NUM_ENDPOINTS; i++) {
+		if (tmp & (1 << udc->ep[i].hwep_num))
+			udc_handle_dma_ep(udc, &udc->ep[i]);
+	}
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *
+ * VBUS detection, pullup handler, and Gadget cable state notification
+ *
+ */
+static void vbus_work(struct work_struct *work)
+{
+	u8 value;
+	struct lpc32xx_udc *udc = container_of(work, struct lpc32xx_udc,
+					       vbus_job);
+
+	if (udc->enabled != 0) {
+		/* Discharge VBUS real quick */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DISCHRG);
+
+		/* Give VBUS some time (100mS) to discharge */
+		msleep(100);
+
+		/* Disable VBUS discharge resistor */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
+			OTG1_VBUS_DISCHRG);
+
+		/* Clear interrupt */
+		i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+			ISP1301_I2C_INTERRUPT_LATCH |
+			ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+
+		/* Get the VBUS status from the transceiver */
+		value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client,
+						 ISP1301_I2C_OTG_CONTROL_2);
+
+		/* VBUS on or off? */
+		if (value & OTG_B_SESS_VLD)
+			udc->vbus = 1;
+		else
+			udc->vbus = 0;
+
+		/* VBUS changed? */
+		if (udc->last_vbus != udc->vbus) {
+			udc->last_vbus = udc->vbus;
+			lpc32xx_vbus_session(&udc->gadget, udc->vbus);
+		}
+	}
+
+	/* Re-enable after completion */
+	enable_irq(udc->udp_irq[IRQ_USB_ATX]);
+}
+
+static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc)
+{
+	struct lpc32xx_udc *udc = _udc;
+
+	/* Defer handling of VBUS IRQ to work queue */
+	disable_irq_nosync(udc->udp_irq[IRQ_USB_ATX]);
+	schedule_work(&udc->vbus_job);
+
+	return IRQ_HANDLED;
+}
+
+static int lpc32xx_start(struct usb_gadget_driver *driver,
+			 int (*bind)(struct usb_gadget *))
+{
+	struct lpc32xx_udc *udc = &controller;
+	int retval, i;
+
+	if (!driver || driver->max_speed < USB_SPEED_FULL ||
+	    !bind || !driver->setup) {
+		dev_err(udc->dev, "bad parameter.\n");
+		return -EINVAL;
+	}
+
+	if (udc->driver) {
+		dev_err(udc->dev, "UDC already has a gadget driver\n");
+		return -EBUSY;
+	}
+
+	udc->driver = driver;
+	udc->gadget.dev.driver = &driver->driver;
+	udc->enabled = 1;
+	udc->selfpowered = 1;
+	udc->vbus = 0;
+
+	retval = bind(&udc->gadget);
+	if (retval) {
+		dev_err(udc->dev, "bind() returned %d\n", retval);
+		udc->enabled = 0;
+		udc->selfpowered = 0;
+		udc->driver = NULL;
+		udc->gadget.dev.driver = NULL;
+		return retval;
+	}
+
+	dev_dbg(udc->dev, "bound to %s\n", driver->driver.name);
+
+	/* Force VBUS process once to check for cable insertion */
+	udc->last_vbus = udc->vbus = 0;
+	schedule_work(&udc->vbus_job);
+
+	/* Do not re-enable ATX IRQ (3) */
+	for (i = IRQ_USB_LP; i < IRQ_USB_ATX; i++)
+		enable_irq(udc->udp_irq[i]);
+
+	return 0;
+}
+
+static int lpc32xx_stop(struct usb_gadget_driver *driver)
+{
+	int i;
+	struct lpc32xx_udc *udc = &controller;
+
+	if (!driver || driver != udc->driver || !driver->unbind)
+		return -EINVAL;
+
+	/* Disable USB pullup */
+	isp1301_pullup_enable(udc, 0, 1);
+
+	for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++)
+		disable_irq(udc->udp_irq[i]);
+
+	if (udc->clocked) {
+
+		spin_lock(&udc->lock);
+		stop_activity(udc);
+		spin_unlock(&udc->lock);
+
+		/*
+		 *  Wait for all the endpoints to disable,
+		 *  before disabling clocks. Don't wait if
+		 *  endpoints are not enabled.
+		 */
+		if (atomic_read(&udc->enabled_ep_cnt))
+			wait_event_interruptible(udc->ep_disable_wait_queue,
+				(atomic_read(&udc->enabled_ep_cnt) == 0));
+
+		spin_lock(&udc->lock);
+		udc_clk_set(udc, 0);
+		spin_unlock(&udc->lock);
+	}
+
+	udc->enabled = 0;
+	pullup(udc, 0);
+
+	driver->unbind(&udc->gadget);
+	udc->gadget.dev.driver = NULL;
+	udc->driver = NULL;
+
+	dev_dbg(udc->dev, "unbound from %s\n", driver->driver.name);
+	return 0;
+}
+
+static void lpc32xx_udc_shutdown(struct platform_device *dev)
+{
+	/* Force disconnect on reboot */
+	struct lpc32xx_udc *udc = &controller;
+
+	pullup(udc, 0);
+}
+
+/*
+ * Callbacks to be overridden by options passed via OF (TODO)
+ */
+
+static void lpc32xx_usbd_conn_chg(int conn)
+{
+	/* Do nothing, it might be nice to enable an LED
+	 * based on conn state being !0 */
+}
+
+static void lpc32xx_usbd_susp_chg(int susp)
+{
+	/* Device suspend if susp != 0 */
+}
+
+static void lpc32xx_rmwkup_chg(int remote_wakup_enable)
+{
+	/* Enable or disable USB remote wakeup */
+}
+
+struct lpc32xx_usbd_cfg lpc32xx_usbddata = {
+	.vbus_drv_pol = 0,
+	.conn_chgb = &lpc32xx_usbd_conn_chg,
+	.susp_chgb = &lpc32xx_usbd_susp_chg,
+	.rmwk_chgb = &lpc32xx_rmwkup_chg,
+};
+
+
+static u64 lpc32xx_usbd_dmamask = ~(u32) 0x7F;
+
+static int __init lpc32xx_udc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lpc32xx_udc *udc = &controller;
+	int retval, i;
+	struct resource *res;
+	dma_addr_t dma_handle;
+	struct device_node *isp1301_node;
+
+	/* init software state */
+	udc->gadget.dev.parent = dev;
+	udc->pdev = pdev;
+	udc->dev = &pdev->dev;
+	udc->enabled = 0;
+
+	if (pdev->dev.of_node) {
+		isp1301_node = of_parse_phandle(pdev->dev.of_node,
+						"transceiver", 0);
+	} else {
+		isp1301_node = NULL;
+	}
+
+	udc->isp1301_i2c_client = isp1301_get_client(isp1301_node);
+	if (!udc->isp1301_i2c_client)
+		return -EPROBE_DEFER;
+
+	dev_info(udc->dev, "ISP1301 I2C device at address 0x%x\n",
+		 udc->isp1301_i2c_client->addr);
+
+	pdev->dev.dma_mask = &lpc32xx_usbd_dmamask;
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	udc->board = &lpc32xx_usbddata;
+
+	/*
+	 * Resources are mapped as follows:
+	 *  IORESOURCE_MEM, base address and size of USB space
+	 *  IORESOURCE_IRQ, USB device low priority interrupt number
+	 *  IORESOURCE_IRQ, USB device high priority interrupt number
+	 *  IORESOURCE_IRQ, USB device interrupt number
+	 *  IORESOURCE_IRQ, USB transceiver interrupt number
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
+	spin_lock_init(&udc->lock);
+
+	/* Get IRQs */
+	for (i = 0; i < 4; i++) {
+		udc->udp_irq[i] = platform_get_irq(pdev, i);
+		if (udc->udp_irq[i] < 0) {
+			dev_err(udc->dev,
+				"irq resource %d not available!\n", i);
+			return udc->udp_irq[i];
+		}
+	}
+
+	udc->io_p_start = res->start;
+	udc->io_p_size = resource_size(res);
+	if (!request_mem_region(udc->io_p_start, udc->io_p_size, driver_name)) {
+		dev_err(udc->dev, "someone's using UDC memory\n");
+		return -EBUSY;
+	}
+
+	udc->udp_baseaddr = ioremap(udc->io_p_start, udc->io_p_size);
+	if (!udc->udp_baseaddr) {
+		retval = -ENOMEM;
+		dev_err(udc->dev, "IO map failure\n");
+		goto io_map_fail;
+	}
+
+	/* Enable AHB slave USB clock, needed for further USB clock control */
+	writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL);
+
+	/* Get required clocks */
+	udc->usb_pll_clk = clk_get(&pdev->dev, "ck_pll5");
+	if (IS_ERR(udc->usb_pll_clk)) {
+		dev_err(udc->dev, "failed to acquire USB PLL\n");
+		retval = PTR_ERR(udc->usb_pll_clk);
+		goto pll_get_fail;
+	}
+	udc->usb_slv_clk = clk_get(&pdev->dev, "ck_usbd");
+	if (IS_ERR(udc->usb_slv_clk)) {
+		dev_err(udc->dev, "failed to acquire USB device clock\n");
+		retval = PTR_ERR(udc->usb_slv_clk);
+		goto usb_clk_get_fail;
+	}
+
+	/* Setup PLL clock to 48MHz */
+	retval = clk_enable(udc->usb_pll_clk);
+	if (retval < 0) {
+		dev_err(udc->dev, "failed to start USB PLL\n");
+		goto pll_enable_fail;
+	}
+
+	retval = clk_set_rate(udc->usb_pll_clk, 48000);
+	if (retval < 0) {
+		dev_err(udc->dev, "failed to set USB clock rate\n");
+		goto pll_set_fail;
+	}
+
+	writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN, USB_CTRL);
+
+	/* Enable USB device clock */
+	retval = clk_enable(udc->usb_slv_clk);
+	if (retval < 0) {
+		dev_err(udc->dev, "failed to start USB device clock\n");
+		goto usb_clk_enable_fail;
+	}
+
+	/* Set to enable all needed USB OTG clocks */
+	writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc));
+
+	i = 1000;
+	while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) !=
+		USB_CLOCK_MASK) && (i > 0))
+		i--;
+	if (!i)
+		dev_dbg(udc->dev, "USB OTG clocks not correctly enabled\n");
+
+	/* Setup deferred workqueue data */
+	udc->poweron = udc->pullup = 0;
+	INIT_WORK(&udc->pullup_job, pullup_work);
+	INIT_WORK(&udc->vbus_job, vbus_work);
+#ifdef CONFIG_PM
+	INIT_WORK(&udc->power_job, power_work);
+#endif
+
+	/* All clocks are now on */
+	udc->clocked = 1;
+
+	isp1301_udc_configure(udc);
+	/* Allocate memory for the UDCA */
+	udc->udca_v_base = dma_alloc_coherent(&pdev->dev, UDCA_BUFF_SIZE,
+					      &dma_handle,
+					      (GFP_KERNEL | GFP_DMA));
+	if (!udc->udca_v_base) {
+		dev_err(udc->dev, "error getting UDCA region\n");
+		retval = -ENOMEM;
+		goto i2c_fail;
+	}
+	udc->udca_p_base = dma_handle;
+	dev_dbg(udc->dev, "DMA buffer(0x%x bytes), P:0x%08x, V:0x%p\n",
+		UDCA_BUFF_SIZE, udc->udca_p_base, udc->udca_v_base);
+
+	/* Setup the DD DMA memory pool */
+	udc->dd_cache = dma_pool_create("udc_dd", udc->dev,
+					sizeof(struct lpc32xx_usbd_dd_gad),
+					sizeof(u32), 0);
+	if (!udc->dd_cache) {
+		dev_err(udc->dev, "error getting DD DMA region\n");
+		retval = -ENOMEM;
+		goto dma_alloc_fail;
+	}
+
+	/* Clear USB peripheral and initialize gadget endpoints */
+	udc_disable(udc);
+	udc_reinit(udc);
+
+	retval = device_register(&udc->gadget.dev);
+	if (retval < 0) {
+		dev_err(udc->dev, "Device registration failure\n");
+		goto dev_register_fail;
+	}
+
+	/* Request IRQs - low and high priority USB device IRQs are routed to
+	 * the same handler, while the DMA interrupt is routed elsewhere */
+	retval = request_irq(udc->udp_irq[IRQ_USB_LP], lpc32xx_usb_lp_irq,
+			     0, "udc_lp", udc);
+	if (retval < 0) {
+		dev_err(udc->dev, "LP request irq %d failed\n",
+			udc->udp_irq[IRQ_USB_LP]);
+		goto irq_lp_fail;
+	}
+	retval = request_irq(udc->udp_irq[IRQ_USB_HP], lpc32xx_usb_hp_irq,
+			     0, "udc_hp", udc);
+	if (retval < 0) {
+		dev_err(udc->dev, "HP request irq %d failed\n",
+			udc->udp_irq[IRQ_USB_HP]);
+		goto irq_hp_fail;
+	}
+
+	retval = request_irq(udc->udp_irq[IRQ_USB_DEVDMA],
+			     lpc32xx_usb_devdma_irq, 0, "udc_dma", udc);
+	if (retval < 0) {
+		dev_err(udc->dev, "DEV request irq %d failed\n",
+			udc->udp_irq[IRQ_USB_DEVDMA]);
+		goto irq_dev_fail;
+	}
+
+	/* The transceiver interrupt is used for VBUS detection and will
+	   kick off the VBUS handler function */
+	retval = request_irq(udc->udp_irq[IRQ_USB_ATX], lpc32xx_usb_vbus_irq,
+			     0, "udc_otg", udc);
+	if (retval < 0) {
+		dev_err(udc->dev, "VBUS request irq %d failed\n",
+			udc->udp_irq[IRQ_USB_ATX]);
+		goto irq_xcvr_fail;
+	}
+
+	/* Initialize wait queue */
+	init_waitqueue_head(&udc->ep_disable_wait_queue);
+	atomic_set(&udc->enabled_ep_cnt, 0);
+
+	/* Keep all IRQs disabled until GadgetFS starts up */
+	for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++)
+		disable_irq(udc->udp_irq[i]);
+
+	retval = usb_add_gadget_udc(dev, &udc->gadget);
+	if (retval < 0)
+		goto add_gadget_fail;
+
+	dev_set_drvdata(dev, udc);
+	device_init_wakeup(dev, 1);
+	create_debug_file(udc);
+
+	/* Disable clocks for now */
+	udc_clk_set(udc, 0);
+
+	dev_info(udc->dev, "%s version %s\n", driver_name, DRIVER_VERSION);
+	return 0;
+
+add_gadget_fail:
+	free_irq(udc->udp_irq[IRQ_USB_ATX], udc);
+irq_xcvr_fail:
+	free_irq(udc->udp_irq[IRQ_USB_DEVDMA], udc);
+irq_dev_fail:
+	free_irq(udc->udp_irq[IRQ_USB_HP], udc);
+irq_hp_fail:
+	free_irq(udc->udp_irq[IRQ_USB_LP], udc);
+irq_lp_fail:
+	device_unregister(&udc->gadget.dev);
+dev_register_fail:
+	dma_pool_destroy(udc->dd_cache);
+dma_alloc_fail:
+	dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
+			  udc->udca_v_base, udc->udca_p_base);
+i2c_fail:
+	clk_disable(udc->usb_slv_clk);
+usb_clk_enable_fail:
+pll_set_fail:
+	clk_disable(udc->usb_pll_clk);
+pll_enable_fail:
+	clk_put(udc->usb_slv_clk);
+usb_clk_get_fail:
+	clk_put(udc->usb_pll_clk);
+pll_get_fail:
+	iounmap(udc->udp_baseaddr);
+io_map_fail:
+	release_mem_region(udc->io_p_start, udc->io_p_size);
+	dev_err(udc->dev, "%s probe failed, %d\n", driver_name, retval);
+
+	return retval;
+}
+
+static int __devexit lpc32xx_udc_remove(struct platform_device *pdev)
+{
+	struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&udc->gadget);
+	if (udc->driver)
+		return -EBUSY;
+
+	udc_clk_set(udc, 1);
+	udc_disable(udc);
+	pullup(udc, 0);
+
+	free_irq(udc->udp_irq[IRQ_USB_ATX], udc);
+
+	device_init_wakeup(&pdev->dev, 0);
+	remove_debug_file(udc);
+
+	dma_pool_destroy(udc->dd_cache);
+	dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE,
+			  udc->udca_v_base, udc->udca_p_base);
+	free_irq(udc->udp_irq[IRQ_USB_DEVDMA], udc);
+	free_irq(udc->udp_irq[IRQ_USB_HP], udc);
+	free_irq(udc->udp_irq[IRQ_USB_LP], udc);
+
+	device_unregister(&udc->gadget.dev);
+
+	clk_disable(udc->usb_slv_clk);
+	clk_put(udc->usb_slv_clk);
+	clk_disable(udc->usb_pll_clk);
+	clk_put(udc->usb_pll_clk);
+	iounmap(udc->udp_baseaddr);
+	release_mem_region(udc->io_p_start, udc->io_p_size);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	int to = 1000;
+	struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
+
+	if (udc->clocked) {
+		/* Power down ISP */
+		udc->poweron = 0;
+		isp1301_set_powerstate(udc, 0);
+
+		/* Disable clocking */
+		udc_clk_set(udc, 0);
+
+		/* Keep clock flag on, so we know to re-enable clocks
+		   on resume */
+		udc->clocked = 1;
+
+		/* Kill OTG and I2C clocks */
+		writel(0, USB_OTG_CLK_CTRL(udc));
+		while (((readl(USB_OTG_CLK_STAT(udc)) & OTGOFF_CLK_MASK) !=
+			OTGOFF_CLK_MASK) && (to > 0))
+			to--;
+		if (!to)
+			dev_dbg(udc->dev,
+				"USB OTG clocks not correctly enabled\n");
+
+		/* Kill global USB clock */
+		clk_disable(udc->usb_slv_clk);
+	}
+
+	return 0;
+}
+
+static int lpc32xx_udc_resume(struct platform_device *pdev)
+{
+	struct lpc32xx_udc *udc = platform_get_drvdata(pdev);
+
+	if (udc->clocked) {
+		/* Enable global USB clock */
+		clk_enable(udc->usb_slv_clk);
+
+		/* Enable clocking */
+		udc_clk_set(udc, 1);
+
+		/* ISP back to normal power mode */
+		udc->poweron = 1;
+		isp1301_set_powerstate(udc, 1);
+	}
+
+	return 0;
+}
+#else
+#define	lpc32xx_udc_suspend	NULL
+#define	lpc32xx_udc_resume	NULL
+#endif
+
+#ifdef CONFIG_OF
+static struct of_device_id lpc32xx_udc_of_match[] = {
+	{ .compatible = "nxp,lpc3220-udc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_udc_of_match);
+#endif
+
+static struct platform_driver lpc32xx_udc_driver = {
+	.remove		= __devexit_p(lpc32xx_udc_remove),
+	.shutdown	= lpc32xx_udc_shutdown,
+	.suspend	= lpc32xx_udc_suspend,
+	.resume		= lpc32xx_udc_resume,
+	.driver		= {
+		.name	= (char *) driver_name,
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(lpc32xx_udc_of_match),
+	},
+};
+
+static int __init udc_init_module(void)
+{
+	return platform_driver_probe(&lpc32xx_udc_driver, lpc32xx_udc_probe);
+}
+module_init(udc_init_module);
+
+static void __exit udc_exit_module(void)
+{
+	platform_driver_unregister(&lpc32xx_udc_driver);
+}
+module_exit(udc_exit_module);
+
+MODULE_DESCRIPTION("LPC32XX udc driver");
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lpc32xx_udc");
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 3608b3bd5732..8981fbb5748c 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -390,7 +390,7 @@ static int alloc_pipe_config(struct m66592_ep *ep,
 	int *counter;
 	int ret;
 
-	ep->desc = desc;
+	ep->ep.desc = desc;
 
 	BUG_ON(ep->pipenum);
 
@@ -558,7 +558,7 @@ static void start_packet_read(struct m66592_ep *ep, struct m66592_request *req)
 
 static void start_packet(struct m66592_ep *ep, struct m66592_request *req)
 {
-	if (ep->desc->bEndpointAddress & USB_DIR_IN)
+	if (ep->ep.desc->bEndpointAddress & USB_DIR_IN)
 		start_packet_write(ep, req);
 	else
 		start_packet_read(ep, req);
@@ -734,7 +734,7 @@ __acquires(m66592->lock)
 
 	if (restart) {
 		req = list_entry(ep->queue.next, struct m66592_request, queue);
-		if (ep->desc)
+		if (ep->ep.desc)
 			start_packet(ep, req);
 	}
 }
@@ -917,7 +917,7 @@ static void irq_pipe_ready(struct m66592 *m66592, u16 status, u16 enb)
 				ep = m66592->pipenum2ep[pipenum];
 				req = list_entry(ep->queue.next,
 						 struct m66592_request, queue);
-				if (ep->desc->bEndpointAddress & USB_DIR_IN)
+				if (ep->ep.desc->bEndpointAddress & USB_DIR_IN)
 					irq_packet_write(ep, req);
 				else
 					irq_packet_read(ep, req);
@@ -1377,7 +1377,7 @@ static int m66592_queue(struct usb_ep *_ep, struct usb_request *_req,
 	req->req.actual = 0;
 	req->req.status = -EINPROGRESS;
 
-	if (ep->desc == NULL)	/* control */
+	if (ep->ep.desc == NULL)	/* control */
 		start_ep0(ep, req);
 	else {
 		if (request && !ep->busy)
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index 9d9f7e39f037..88c85b4116a2 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -456,7 +456,7 @@ struct m66592_ep {
 	unsigned		use_dma:1;
 	u16			pipenum;
 	u16			type;
-	const struct usb_endpoint_descriptor	*desc;
+
 	/* register address */
 	unsigned long		fifoaddr;
 	unsigned long		fifosel;
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
index e2be9519abbe..9073436d8b24 100644
--- a/drivers/usb/gadget/mv_udc.h
+++ b/drivers/usb/gadget/mv_udc.h
@@ -232,7 +232,6 @@ struct mv_ep {
 	struct mv_udc		*udc;
 	struct list_head	queue;
 	struct mv_dqh		*dqh;
-	const struct usb_endpoint_descriptor	*desc;
 	u32			direction;
 	char			name[14];
 	unsigned		stopped:1,
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index a73cf406e2a4..dbcd1329495e 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -464,7 +464,7 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	ep = container_of(_ep, struct mv_ep, ep);
 	udc = ep->udc;
 
-	if (!_ep || !desc || ep->desc
+	if (!_ep || !desc || ep->ep.desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT)
 		return -EINVAL;
 
@@ -528,7 +528,7 @@ static int mv_ep_enable(struct usb_ep *_ep,
 	dqh->size_ioc_int_sts = 0;
 
 	ep->ep.maxpacket = max;
-	ep->desc = desc;
+	ep->ep.desc = desc;
 	ep->stopped = 0;
 
 	/* Enable the endpoint for Rx or Tx and set the endpoint type */
@@ -580,7 +580,7 @@ static int  mv_ep_disable(struct usb_ep *_ep)
 	unsigned long flags;
 
 	ep = container_of(_ep, struct mv_ep, ep);
-	if ((_ep == NULL) || !ep->desc)
+	if ((_ep == NULL) || !ep->ep.desc)
 		return -EINVAL;
 
 	udc = ep->udc;
@@ -606,7 +606,6 @@ static int  mv_ep_disable(struct usb_ep *_ep)
 	/* nuke all pending requests (does flush) */
 	nuke(ep, -ESHUTDOWN);
 
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 	ep->stopped = 1;
 
@@ -651,7 +650,7 @@ static void mv_ep_fifo_flush(struct usb_ep *_ep)
 		return;
 
 	ep = container_of(_ep, struct mv_ep, ep);
-	if (!ep->desc)
+	if (!ep->ep.desc)
 		return;
 
 	udc = ep->udc;
@@ -715,11 +714,11 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		dev_err(&udc->dev->dev, "%s, bad params", __func__);
 		return -EINVAL;
 	}
-	if (unlikely(!_ep || !ep->desc)) {
+	if (unlikely(!_ep || !ep->ep.desc)) {
 		dev_err(&udc->dev->dev, "%s, bad ep", __func__);
 		return -EINVAL;
 	}
-	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
 		if (req->req.length > ep->ep.maxpacket)
 			return -EMSGSIZE;
 	}
@@ -925,12 +924,12 @@ static int mv_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
 
 	ep = container_of(_ep, struct mv_ep, ep);
 	udc = ep->udc;
-	if (!_ep || !ep->desc) {
+	if (!_ep || !ep->ep.desc) {
 		status = -EINVAL;
 		goto out;
 	}
 
-	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+	if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
 		status = -EOPNOTSUPP;
 		goto out;
 	}
@@ -1279,7 +1278,7 @@ static int eps_init(struct mv_udc *udc)
 	ep->stopped = 0;
 	ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
 	ep->ep_num = 0;
-	ep->desc = &mv_ep0_desc;
+	ep->ep.desc = &mv_ep0_desc;
 	INIT_LIST_HEAD(&ep->queue);
 
 	ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 3b4b6dd0f95a..7ba32469c5bd 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -153,7 +153,7 @@ static int omap_ep_enable(struct usb_ep *_ep,
 	u16		maxp;
 
 	/* catch various bogus parameters */
-	if (!_ep || !desc || ep->desc
+	if (!_ep || !desc || ep->ep.desc
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
 			|| ep->maxpacket < usb_endpoint_maxp(desc)) {
@@ -200,7 +200,7 @@ static int omap_ep_enable(struct usb_ep *_ep,
 
 	spin_lock_irqsave(&udc->lock, flags);
 
-	ep->desc = desc;
+	ep->ep.desc = desc;
 	ep->irqs = 0;
 	ep->stopped = 0;
 	ep->ep.maxpacket = maxp;
@@ -242,14 +242,13 @@ static int omap_ep_disable(struct usb_ep *_ep)
 	struct omap_ep	*ep = container_of(_ep, struct omap_ep, ep);
 	unsigned long	flags;
 
-	if (!_ep || !ep->desc) {
+	if (!_ep || !ep->ep.desc) {
 		DBG("%s, %s not enabled\n", __func__,
 			_ep ? ep->ep.name : NULL);
 		return -EINVAL;
 	}
 
 	spin_lock_irqsave(&ep->udc->lock, flags);
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 	nuke (ep, -ESHUTDOWN);
 	ep->ep.maxpacket = ep->maxpacket;
@@ -917,7 +916,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 		DBG("%s, bad params\n", __func__);
 		return -EINVAL;
 	}
-	if (!_ep || (!ep->desc && ep->bEndpointAddress)) {
+	if (!_ep || (!ep->ep.desc && ep->bEndpointAddress)) {
 		DBG("%s, bad ep\n", __func__);
 		return -EINVAL;
 	}
@@ -1121,7 +1120,7 @@ static int omap_ep_set_halt(struct usb_ep *_ep, int value)
 			status = 0;
 
 	/* otherwise, all active non-ISO endpoints can halt */
-	} else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->desc) {
+	} else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->ep.desc) {
 
 		/* IN endpoints must already be idle */
 		if ((ep->bEndpointAddress & USB_DIR_IN)
@@ -1625,7 +1624,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
 				if (w_index & USB_DIR_IN)
 					ep += 16;
 				if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
-						|| !ep->desc)
+						|| !ep->ep.desc)
 					goto do_stall;
 				use_ep(ep, 0);
 				omap_writew(udc->clr_halt, UDC_CTRL);
@@ -1653,7 +1652,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
 			if (w_index & USB_DIR_IN)
 				ep += 16;
 			if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
-					|| ep == ep0 || !ep->desc)
+					|| ep == ep0 || !ep->ep.desc)
 				goto do_stall;
 			if (use_dma && ep->has_dma) {
 				/* this has rude side-effects (aborts) and
@@ -1688,7 +1687,7 @@ ep0out_status_stage:
 			ep = &udc->ep[w_index & 0xf];
 			if (w_index & USB_DIR_IN)
 				ep += 16;
-			if (!ep->desc)
+			if (!ep->ep.desc)
 				goto do_stall;
 
 			/* iso never stalls */
@@ -2509,7 +2508,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
 		if (tmp & UDC_ADD) {
 			list_for_each_entry (ep, &udc->gadget.ep_list,
 					ep.ep_list) {
-				if (ep->desc)
+				if (ep->ep.desc)
 					proc_ep_show(s, ep);
 			}
 		}
diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h
index 59d3b2213cb1..cfadeb5fc5de 100644
--- a/drivers/usb/gadget/omap_udc.h
+++ b/drivers/usb/gadget/omap_udc.h
@@ -140,7 +140,6 @@ struct omap_ep {
 	struct list_head		queue;
 	unsigned long			irqs;
 	struct list_head		iso;
-	const struct usb_endpoint_descriptor	*desc;
 	char				name[14];
 	u16				maxpacket;
 	u8				bEndpointAddress;
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 65307064a6fd..1cfcc9ecbfbc 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -295,7 +295,6 @@ struct pch_udc_ep {
 	struct pch_udc_data_dma_desc	*td_data;
 	struct pch_udc_dev		*dev;
 	unsigned long			offset_addr;
-	const struct usb_endpoint_descriptor	*desc;
 	struct list_head		queue;
 	unsigned			num:5,
 					in:1,
@@ -1705,7 +1704,7 @@ static int pch_udc_pcd_ep_enable(struct usb_ep *usbep,
 	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
 		return -ESHUTDOWN;
 	spin_lock_irqsave(&dev->lock, iflags);
-	ep->desc = desc;
+	ep->ep.desc = desc;
 	ep->halted = 0;
 	pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc);
 	ep->ep.maxpacket = usb_endpoint_maxp(desc);
@@ -1734,7 +1733,7 @@ static int pch_udc_pcd_ep_disable(struct usb_ep *usbep)
 
 	ep = container_of(usbep, struct pch_udc_ep, ep);
 	dev = ep->dev;
-	if ((usbep->name == ep0_string) || !ep->desc)
+	if ((usbep->name == ep0_string) || !ep->ep.desc)
 		return -EINVAL;
 
 	spin_lock_irqsave(&ep->dev->lock, iflags);
@@ -1742,7 +1741,6 @@ static int pch_udc_pcd_ep_disable(struct usb_ep *usbep)
 	ep->halted = 1;
 	pch_udc_ep_disable(ep);
 	pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 	INIT_LIST_HEAD(&ep->queue);
 	spin_unlock_irqrestore(&ep->dev->lock, iflags);
@@ -1849,7 +1847,7 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
 		return -EINVAL;
 	ep = container_of(usbep, struct pch_udc_ep, ep);
 	dev = ep->dev;
-	if (!ep->desc && ep->num)
+	if (!ep->ep.desc && ep->num)
 		return -EINVAL;
 	req = container_of(usbreq, struct pch_udc_request, req);
 	if (!list_empty(&req->queue))
@@ -1949,7 +1947,7 @@ static int pch_udc_pcd_dequeue(struct usb_ep *usbep,
 
 	ep = container_of(usbep, struct pch_udc_ep, ep);
 	dev = ep->dev;
-	if (!usbep || !usbreq || (!ep->desc && ep->num))
+	if (!usbep || !usbreq || (!ep->ep.desc && ep->num))
 		return ret;
 	req = container_of(usbreq, struct pch_udc_request, req);
 	spin_lock_irqsave(&ep->dev->lock, flags);
@@ -1988,7 +1986,7 @@ static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt)
 		return -EINVAL;
 	ep = container_of(usbep, struct pch_udc_ep, ep);
 	dev = ep->dev;
-	if (!ep->desc && !ep->num)
+	if (!ep->ep.desc && !ep->num)
 		return -EINVAL;
 	if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
 		return -ESHUTDOWN;
@@ -2033,7 +2031,7 @@ static int pch_udc_pcd_set_wedge(struct usb_ep *usbep)
 		return -EINVAL;
 	ep = container_of(usbep, struct pch_udc_ep, ep);
 	dev = ep->dev;
-	if (!ep->desc && !ep->num)
+	if (!ep->ep.desc && !ep->num)
 		return -EINVAL;
 	if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
 		return -ESHUTDOWN;
@@ -2065,7 +2063,7 @@ static void pch_udc_pcd_fifo_flush(struct usb_ep *usbep)
 		return;
 
 	ep = container_of(usbep, struct pch_udc_ep, ep);
-	if (ep->desc || !ep->num)
+	if (ep->ep.desc || !ep->num)
 		pch_udc_ep_fifo_flush(ep, ep->in);
 }
 
@@ -3282,7 +3280,6 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = {
 
 MODULE_DEVICE_TABLE(pci, pch_udc_pcidev_id);
 
-
 static struct pci_driver pch_udc_driver = {
 	.name =	KBUILD_MODNAME,
 	.id_table =	pch_udc_pcidev_id,
@@ -3293,17 +3290,7 @@ static struct pci_driver pch_udc_driver = {
 	.shutdown =	pch_udc_shutdown,
 };
 
-static int __init pch_udc_pci_init(void)
-{
-	return pci_register_driver(&pch_udc_driver);
-}
-module_init(pch_udc_pci_init);
-
-static void __exit pch_udc_pci_exit(void)
-{
-	pci_unregister_driver(&pch_udc_driver);
-}
-module_exit(pch_udc_pci_exit);
+module_pci_driver(pch_udc_driver);
 
 MODULE_DESCRIPTION("Intel EG20T USB Device Controller");
 MODULE_AUTHOR("LAPIS Semiconductor, <tomoya-linux@dsn.lapis-semi.com>");
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 4e4dc1f5f388..f1f9290a2f47 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -51,6 +51,7 @@
  * the runtime footprint, and giving us at least some parts of what
  * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
  */
+#include "composite.c"
 #include "usbstring.c"
 #include "config.c"
 #include "epautoconf.c"
@@ -75,8 +76,6 @@ struct printer_dev {
 	/* lock buffer lists during read/write calls */
 	struct mutex		lock_printer_io;
 	struct usb_gadget	*gadget;
-	struct usb_request	*req;		/* for control responses */
-	u8			config;
 	s8			interface;
 	struct usb_ep		*in_ep, *out_ep;
 
@@ -100,6 +99,7 @@ struct printer_dev {
 	struct device		*pdev;
 	u8			printer_cdev_open;
 	wait_queue_head_t	wait;
+	struct usb_function	function;
 };
 
 static struct printer_dev usb_printer_gadget;
@@ -120,26 +120,6 @@ static struct printer_dev usb_printer_gadget;
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
 
-static ushort idVendor;
-module_param(idVendor, ushort, S_IRUGO);
-MODULE_PARM_DESC(idVendor, "USB Vendor ID");
-
-static ushort idProduct;
-module_param(idProduct, ushort, S_IRUGO);
-MODULE_PARM_DESC(idProduct, "USB Product ID");
-
-static ushort bcdDevice;
-module_param(bcdDevice, ushort, S_IRUGO);
-MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
-
-static char *iManufacturer;
-module_param(iManufacturer, charp, S_IRUGO);
-MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
-
-static char *iProduct;
-module_param(iProduct, charp, S_IRUGO);
-MODULE_PARM_DESC(iProduct, "USB Product string");
-
 static char *iSerialNum;
 module_param(iSerialNum, charp, S_IRUGO);
 MODULE_PARM_DESC(iSerialNum, "1");
@@ -154,47 +134,8 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
 
 #define QLEN	qlen
 
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-#define DEVSPEED	USB_SPEED_HIGH
-#else   /* full speed (low speed doesn't do bulk) */
-#define DEVSPEED        USB_SPEED_FULL
-#endif
-
 /*-------------------------------------------------------------------------*/
 
-#define xprintk(d, level, fmt, args...) \
-	printk(level "%s: " fmt, DRIVER_DESC, ## args)
-
-#ifdef DEBUG
-#define DBG(dev, fmt, args...) \
-	xprintk(dev, KERN_DEBUG, fmt, ## args)
-#else
-#define DBG(dev, fmt, args...) \
-	do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE
-#define VDBG(dev, fmt, args...) \
-	xprintk(dev, KERN_DEBUG, fmt, ## args)
-#else
-#define VDBG(dev, fmt, args...) \
-	do { } while (0)
-#endif /* VERBOSE */
-
-#define ERROR(dev, fmt, args...) \
-	xprintk(dev, KERN_ERR, fmt, ## args)
-#define WARNING(dev, fmt, args...) \
-	xprintk(dev, KERN_WARNING, fmt, ## args)
-#define INFO(dev, fmt, args...) \
-	xprintk(dev, KERN_INFO, fmt, ## args)
-
-/*-------------------------------------------------------------------------*/
-
-/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly
- * ep0 implementation:  descriptors, config management, setup().
- * also optional class-specific notification interrupt transfer.
- */
-
 /*
  * DESCRIPTORS ... most are static, but strings and (full) configuration
  * descriptors are built on demand.
@@ -227,24 +168,6 @@ static struct usb_device_descriptor device_desc = {
 	.bNumConfigurations =	1
 };
 
-static struct usb_otg_descriptor otg_desc = {
-	.bLength =		sizeof otg_desc,
-	.bDescriptorType =	USB_DT_OTG,
-	.bmAttributes =		USB_OTG_SRP
-};
-
-static struct usb_config_descriptor config_desc = {
-	.bLength =		sizeof config_desc,
-	.bDescriptorType =	USB_DT_CONFIG,
-
-	/* compute wTotalLength on the fly */
-	.bNumInterfaces =	1,
-	.bConfigurationValue =	DEV_CONFIG_VALUE,
-	.iConfiguration =	0,
-	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
-	.bMaxPower =		CONFIG_USB_GADGET_VBUS_DRAW / 2,
-};
-
 static struct usb_interface_descriptor intf_desc = {
 	.bLength =		sizeof intf_desc,
 	.bDescriptorType =	USB_DT_INTERFACE,
@@ -270,16 +193,13 @@ static struct usb_endpoint_descriptor fs_ep_out_desc = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK
 };
 
-static const struct usb_descriptor_header *fs_printer_function [11] = {
-	(struct usb_descriptor_header *) &otg_desc,
+static struct usb_descriptor_header *fs_printer_function[] = {
 	(struct usb_descriptor_header *) &intf_desc,
 	(struct usb_descriptor_header *) &fs_ep_in_desc,
 	(struct usb_descriptor_header *) &fs_ep_out_desc,
 	NULL
 };
 
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
-
 /*
  * usb 2.0 devices need to expose both high speed and full speed
  * descriptors, unless they only run at full speed.
@@ -307,23 +227,26 @@ static struct usb_qualifier_descriptor dev_qualifier = {
 	.bNumConfigurations =	1
 };
 
-static const struct usb_descriptor_header *hs_printer_function [11] = {
-	(struct usb_descriptor_header *) &otg_desc,
+static struct usb_descriptor_header *hs_printer_function[] = {
 	(struct usb_descriptor_header *) &intf_desc,
 	(struct usb_descriptor_header *) &hs_ep_in_desc,
 	(struct usb_descriptor_header *) &hs_ep_out_desc,
 	NULL
 };
 
-/* maxpacket and other transfer characteristics vary by speed. */
-#define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs))
-
-#else
+static struct usb_otg_descriptor otg_descriptor = {
+	.bLength =              sizeof otg_descriptor,
+	.bDescriptorType =      USB_DT_OTG,
+	.bmAttributes =         USB_OTG_SRP,
+};
 
-/* if there's no high speed support, maxpacket doesn't change. */
-#define ep_desc(g, hs, fs) (((void)(g)), (fs))
+static const struct usb_descriptor_header *otg_desc[] = {
+	(struct usb_descriptor_header *) &otg_descriptor,
+	NULL,
+};
 
-#endif	/* !CONFIG_USB_GADGET_DUALSPEED */
+/* maxpacket and other transfer characteristics vary by speed. */
+#define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs))
 
 /*-------------------------------------------------------------------------*/
 
@@ -343,11 +266,16 @@ static struct usb_string		strings [] = {
 	{  }		/* end of list */
 };
 
-static struct usb_gadget_strings	stringtab = {
+static struct usb_gadget_strings	stringtab_dev = {
 	.language	= 0x0409,	/* en-us */
 	.strings	= strings,
 };
 
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
 /*-------------------------------------------------------------------------*/
 
 static struct usb_request *
@@ -937,82 +865,8 @@ static void printer_reset_interface(struct printer_dev *dev)
 	dev->interface = -1;
 }
 
-/* change our operational config.  must agree with the code
- * that returns config descriptors, and altsetting code.
- */
-static int
-printer_set_config(struct printer_dev *dev, unsigned number)
-{
-	int			result = 0;
-	struct usb_gadget	*gadget = dev->gadget;
-
-	switch (number) {
-	case DEV_CONFIG_VALUE:
-		result = 0;
-		break;
-	default:
-		result = -EINVAL;
-		/* FALL THROUGH */
-	case 0:
-		break;
-	}
-
-	if (result) {
-		usb_gadget_vbus_draw(dev->gadget,
-				dev->gadget->is_otg ? 8 : 100);
-	} else {
-		unsigned power;
-
-		power = 2 * config_desc.bMaxPower;
-		usb_gadget_vbus_draw(dev->gadget, power);
-
-		dev->config = number;
-		INFO(dev, "%s config #%d: %d mA, %s\n",
-		     usb_speed_string(gadget->speed),
-		     number, power, driver_desc);
-	}
-	return result;
-}
-
-static int
-config_buf(enum usb_device_speed speed, u8 *buf, u8 type, unsigned index,
-		int is_otg)
-{
-	int					len;
-	const struct usb_descriptor_header	**function;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-	int					hs = (speed == USB_SPEED_HIGH);
-
-	if (type == USB_DT_OTHER_SPEED_CONFIG)
-		hs = !hs;
-
-	if (hs) {
-		function = hs_printer_function;
-	} else {
-		function = fs_printer_function;
-	}
-#else
-	function = fs_printer_function;
-#endif
-
-	if (index >= device_desc.bNumConfigurations)
-		return -EINVAL;
-
-	/* for now, don't advertise srp-only devices */
-	if (!is_otg)
-		function++;
-
-	len = usb_gadget_config_buf(&config_desc, buf, USB_DESC_BUFSIZE,
-			function);
-	if (len < 0)
-		return len;
-	((struct usb_config_descriptor *) buf)->bDescriptorType = type;
-	return len;
-}
-
 /* Change our operational Interface. */
-static int
-set_interface(struct printer_dev *dev, unsigned number)
+static int set_interface(struct printer_dev *dev, unsigned number)
 {
 	int			result = 0;
 
@@ -1043,14 +897,6 @@ set_interface(struct printer_dev *dev, unsigned number)
 	return result;
 }
 
-static void printer_setup_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	if (req->status || req->actual != req->length)
-		DBG((struct printer_dev *) ep->driver_data,
-				"setup complete --> %d, %d/%d\n",
-				req->status, req->actual, req->length);
-}
-
 static void printer_soft_reset(struct printer_dev *dev)
 {
 	struct usb_request	*req;
@@ -1107,11 +953,12 @@ static void printer_soft_reset(struct printer_dev *dev)
  * The setup() callback implements all the ep0 functionality that's not
  * handled lower down.
  */
-static int
-printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+static int printer_func_setup(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
 {
-	struct printer_dev	*dev = get_gadget_data(gadget);
-	struct usb_request	*req = dev->req;
+	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
 	int			value = -EOPNOTSUPP;
 	u16			wIndex = le16_to_cpu(ctrl->wIndex);
 	u16			wValue = le16_to_cpu(ctrl->wValue);
@@ -1120,102 +967,7 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
 		ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
 
-	req->complete = printer_setup_complete;
-
 	switch (ctrl->bRequestType&USB_TYPE_MASK) {
-
-	case USB_TYPE_STANDARD:
-		switch (ctrl->bRequest) {
-
-		case USB_REQ_GET_DESCRIPTOR:
-			if (ctrl->bRequestType != USB_DIR_IN)
-				break;
-			switch (wValue >> 8) {
-
-			case USB_DT_DEVICE:
-				device_desc.bMaxPacketSize0 =
-					gadget->ep0->maxpacket;
-				value = min(wLength, (u16) sizeof device_desc);
-				memcpy(req->buf, &device_desc, value);
-				break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-			case USB_DT_DEVICE_QUALIFIER:
-				if (!gadget_is_dualspeed(gadget))
-					break;
-				/*
-				 * assumes ep0 uses the same value for both
-				 * speeds
-				 */
-				dev_qualifier.bMaxPacketSize0 =
-					gadget->ep0->maxpacket;
-				value = min(wLength,
-						(u16) sizeof dev_qualifier);
-				memcpy(req->buf, &dev_qualifier, value);
-				break;
-
-			case USB_DT_OTHER_SPEED_CONFIG:
-				if (!gadget_is_dualspeed(gadget))
-					break;
-				/* FALLTHROUGH */
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
-			case USB_DT_CONFIG:
-				value = config_buf(gadget->speed, req->buf,
-						wValue >> 8,
-						wValue & 0xff,
-						gadget->is_otg);
-				if (value >= 0)
-					value = min(wLength, (u16) value);
-				break;
-
-			case USB_DT_STRING:
-				value = usb_gadget_get_string(&stringtab,
-						wValue & 0xff, req->buf);
-				if (value >= 0)
-					value = min(wLength, (u16) value);
-				break;
-			}
-			break;
-
-		case USB_REQ_SET_CONFIGURATION:
-			if (ctrl->bRequestType != 0)
-				break;
-			if (gadget->a_hnp_support)
-				DBG(dev, "HNP available\n");
-			else if (gadget->a_alt_hnp_support)
-				DBG(dev, "HNP needs a different root port\n");
-			value = printer_set_config(dev, wValue);
-			if (!value)
-				value = set_interface(dev, PRINTER_INTERFACE);
-			break;
-		case USB_REQ_GET_CONFIGURATION:
-			if (ctrl->bRequestType != USB_DIR_IN)
-				break;
-			*(u8 *)req->buf = dev->config;
-			value = min(wLength, (u16) 1);
-			break;
-
-		case USB_REQ_SET_INTERFACE:
-			if (ctrl->bRequestType != USB_RECIP_INTERFACE ||
-					!dev->config)
-				break;
-
-			value = set_interface(dev, PRINTER_INTERFACE);
-			break;
-		case USB_REQ_GET_INTERFACE:
-			if (ctrl->bRequestType !=
-					(USB_DIR_IN|USB_RECIP_INTERFACE)
-					|| !dev->config)
-				break;
-
-			*(u8 *)req->buf = dev->interface;
-			value = min(wLength, (u16) 1);
-			break;
-
-		default:
-			goto unknown;
-		}
-		break;
-
 	case USB_TYPE_CLASS:
 		switch (ctrl->bRequest) {
 		case 0: /* Get the IEEE-1284 PNP String */
@@ -1261,44 +1013,50 @@ unknown:
 			wValue, wIndex, wLength);
 		break;
 	}
-
-	/* respond with data transfer before status phase? */
-	if (value >= 0) {
-		req->length = value;
-		req->zero = value < wLength;
-		value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
-		if (value < 0) {
-			DBG(dev, "ep_queue --> %d\n", value);
-			req->status = 0;
-			printer_setup_complete(gadget->ep0, req);
-		}
-	}
-
 	/* host either stalls (value < 0) or reports success */
 	return value;
 }
 
-static void
-printer_disconnect(struct usb_gadget *gadget)
+static int __init printer_func_bind(struct usb_configuration *c,
+		struct usb_function *f)
 {
-	struct printer_dev	*dev = get_gadget_data(gadget);
+	return 0;
+}
+
+static void printer_func_unbind(struct usb_configuration *c,
+		struct usb_function *f)
+{
+}
+
+static int printer_func_set_alt(struct usb_function *f,
+		unsigned intf, unsigned alt)
+{
+	struct printer_dev *dev = container_of(f, struct printer_dev, function);
+	int ret = -ENOTSUPP;
+
+	if (!alt)
+		ret = set_interface(dev, PRINTER_INTERFACE);
+	return ret;
+}
+
+static void printer_func_disable(struct usb_function *f)
+{
+	struct printer_dev *dev = container_of(f, struct printer_dev, function);
 	unsigned long		flags;
 
 	DBG(dev, "%s\n", __func__);
 
 	spin_lock_irqsave(&dev->lock, flags);
-
 	printer_reset_interface(dev);
-
 	spin_unlock_irqrestore(&dev->lock, flags);
 }
 
-static void
-printer_unbind(struct usb_gadget *gadget)
+static void printer_cfg_unbind(struct usb_configuration *c)
 {
-	struct printer_dev	*dev = get_gadget_data(gadget);
+	struct printer_dev	*dev;
 	struct usb_request	*req;
 
+	dev = &usb_printer_gadget;
 
 	DBG(dev, "%s\n", __func__);
 
@@ -1336,18 +1094,18 @@ printer_unbind(struct usb_gadget *gadget)
 		list_del(&req->list);
 		printer_req_free(dev->out_ep, req);
 	}
-
-	if (dev->req) {
-		printer_req_free(gadget->ep0, dev->req);
-		dev->req = NULL;
-	}
-
-	set_gadget_data(gadget, NULL);
 }
 
-static int __init
-printer_bind(struct usb_gadget *gadget)
+static struct usb_configuration printer_cfg_driver = {
+	.label			= "printer",
+	.unbind			= printer_cfg_unbind,
+	.bConfigurationValue	= 1,
+	.bmAttributes		= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+};
+
+static int __init printer_bind_config(struct usb_configuration *c)
 {
+	struct usb_gadget	*gadget = c->cdev->gadget;
 	struct printer_dev	*dev;
 	struct usb_ep		*in_ep, *out_ep;
 	int			status = -ENOMEM;
@@ -1358,6 +1116,14 @@ printer_bind(struct usb_gadget *gadget)
 
 	dev = &usb_printer_gadget;
 
+	dev->function.name = shortname;
+	dev->function.descriptors = fs_printer_function;
+	dev->function.hs_descriptors = hs_printer_function;
+	dev->function.bind = printer_func_bind;
+	dev->function.setup = printer_func_setup;
+	dev->function.unbind = printer_func_unbind;
+	dev->function.set_alt = printer_func_set_alt;
+	dev->function.disable = printer_func_disable;
 
 	/* Setup the sysfs files for the printer gadget. */
 	dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
@@ -1393,29 +1159,6 @@ printer_bind(struct usb_gadget *gadget)
 		init_utsname()->sysname, init_utsname()->release,
 		gadget->name);
 
-	device_desc.idVendor =
-		cpu_to_le16(PRINTER_VENDOR_NUM);
-	device_desc.idProduct =
-		cpu_to_le16(PRINTER_PRODUCT_NUM);
-
-	/* support optional vendor/distro customization */
-	if (idVendor) {
-		if (!idProduct) {
-			dev_err(&gadget->dev, "idVendor needs idProduct!\n");
-			return -ENODEV;
-		}
-		device_desc.idVendor = cpu_to_le16(idVendor);
-		device_desc.idProduct = cpu_to_le16(idProduct);
-		if (bcdDevice)
-			device_desc.bcdDevice = cpu_to_le16(bcdDevice);
-	}
-
-	if (iManufacturer)
-		strlcpy(manufacturer, iManufacturer, sizeof manufacturer);
-
-	if (iProduct)
-		strlcpy(product_desc, iProduct, sizeof product_desc);
-
 	if (iSerialNum)
 		strlcpy(serial_num, iSerialNum, sizeof serial_num);
 
@@ -1442,17 +1185,16 @@ autoconf_fail:
 		goto autoconf_fail;
 	out_ep->driver_data = out_ep;	/* claim */
 
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
 	/* assumes that all endpoints are dual-speed */
 	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
 	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-#endif	/* DUALSPEED */
 
 	usb_gadget_set_selfpowered(gadget);
 
 	if (gadget->is_otg) {
-		otg_desc.bmAttributes |= USB_OTG_HNP,
-		config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+		otg_descriptor.bmAttributes |= USB_OTG_HNP;
+		printer_cfg_driver.descriptors = otg_desc;
+		printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
 	spin_lock_init(&dev->lock);
@@ -1466,7 +1208,6 @@ autoconf_fail:
 	init_waitqueue_head(&dev->tx_wait);
 	init_waitqueue_head(&dev->tx_flush_wait);
 
-	dev->config = 0;
 	dev->interface = -1;
 	dev->printer_cdev_open = 0;
 	dev->printer_status = PRINTER_NOT_ERROR;
@@ -1477,14 +1218,6 @@ autoconf_fail:
 	dev->in_ep = in_ep;
 	dev->out_ep = out_ep;
 
-	/* preallocate control message data and buffer */
-	dev->req = printer_req_alloc(gadget->ep0, USB_DESC_BUFSIZE,
-			GFP_KERNEL);
-	if (!dev->req) {
-		status = -ENOMEM;
-		goto fail;
-	}
-
 	for (i = 0; i < QLEN; i++) {
 		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
 		if (!req) {
@@ -1513,45 +1246,37 @@ autoconf_fail:
 		list_add(&req->list, &dev->rx_reqs);
 	}
 
-	dev->req->complete = printer_setup_complete;
-
 	/* finish hookup to lower layer ... */
 	dev->gadget = gadget;
-	set_gadget_data(gadget, dev);
-	gadget->ep0->driver_data = dev;
 
 	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
 	INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name,
 			in_ep->name);
-
 	return 0;
 
 fail:
-	printer_unbind(gadget);
+	printer_cfg_unbind(c);
 	return status;
 }
 
-/*-------------------------------------------------------------------------*/
+static int printer_unbind(struct usb_composite_dev *cdev)
+{
+	return 0;
+}
 
-static struct usb_gadget_driver printer_driver = {
-	.max_speed	= DEVSPEED,
+static int __init printer_bind(struct usb_composite_dev *cdev)
+{
+	return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+}
 
-	.function	= (char *) driver_desc,
+static struct usb_composite_driver printer_driver = {
+	.name           = shortname,
+	.dev            = &device_desc,
+	.strings        = dev_strings,
+	.max_speed      = USB_SPEED_HIGH,
 	.unbind		= printer_unbind,
-
-	.setup		= printer_setup,
-	.disconnect	= printer_disconnect,
-
-	.driver		= {
-		.name		= (char *) shortname,
-		.owner		= THIS_MODULE,
-	},
 };
 
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Craig Nadler");
-MODULE_LICENSE("GPL");
-
 static int __init
 init(void)
 {
@@ -1560,23 +1285,23 @@ init(void)
 	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
 	if (IS_ERR(usb_gadget_class)) {
 		status = PTR_ERR(usb_gadget_class);
-		ERROR(dev, "unable to create usb_gadget class %d\n", status);
+		pr_err("unable to create usb_gadget class %d\n", status);
 		return status;
 	}
 
 	status = alloc_chrdev_region(&g_printer_devno, 0, 1,
 			"USB printer gadget");
 	if (status) {
-		ERROR(dev, "alloc_chrdev_region %d\n", status);
+		pr_err("alloc_chrdev_region %d\n", status);
 		class_destroy(usb_gadget_class);
 		return status;
 	}
 
-	status = usb_gadget_probe_driver(&printer_driver, printer_bind);
+	status = usb_composite_probe(&printer_driver, printer_bind);
 	if (status) {
 		class_destroy(usb_gadget_class);
 		unregister_chrdev_region(g_printer_devno, 1);
-		DBG(dev, "usb_gadget_probe_driver %x\n", status);
+		pr_err("usb_gadget_probe_driver %x\n", status);
 	}
 
 	return status;
@@ -1586,15 +1311,14 @@ module_init(init);
 static void __exit
 cleanup(void)
 {
-	int status;
-
 	mutex_lock(&usb_printer_gadget.lock_printer_io);
-	status = usb_gadget_unregister_driver(&printer_driver);
-	if (status)
-		ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
-
+	usb_composite_unregister(&printer_driver);
 	unregister_chrdev_region(g_printer_devno, 1);
 	class_destroy(usb_gadget_class);
 	mutex_unlock(&usb_printer_gadget.lock_printer_io);
 }
 module_exit(cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Craig Nadler");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 41ed69c96d8c..d7c8cb3bf759 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -218,7 +218,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 	struct pxa25x_udc       *dev;
 
 	ep = container_of (_ep, struct pxa25x_ep, ep);
-	if (!_ep || !desc || ep->desc || _ep->name == ep0name
+	if (!_ep || !desc || ep->ep.desc || _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT
 			|| ep->bEndpointAddress != desc->bEndpointAddress
 			|| ep->fifo_size < usb_endpoint_maxp (desc)) {
@@ -249,7 +249,7 @@ static int pxa25x_ep_enable (struct usb_ep *_ep,
 		return -ESHUTDOWN;
 	}
 
-	ep->desc = desc;
+	ep->ep.desc = desc;
 	ep->stopped = 0;
 	ep->pio_irqs = 0;
 	ep->ep.maxpacket = usb_endpoint_maxp (desc);
@@ -269,7 +269,7 @@ static int pxa25x_ep_disable (struct usb_ep *_ep)
 	unsigned long		flags;
 
 	ep = container_of (_ep, struct pxa25x_ep, ep);
-	if (!_ep || !ep->desc) {
+	if (!_ep || !ep->ep.desc) {
 		DMSG("%s, %s not enabled\n", __func__,
 			_ep ? ep->ep.name : NULL);
 		return -EINVAL;
@@ -281,7 +281,6 @@ static int pxa25x_ep_disable (struct usb_ep *_ep)
 	/* flush fifo (mostly for IN buffers) */
 	pxa25x_ep_fifo_flush (_ep);
 
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 	ep->stopped = 1;
 
@@ -390,7 +389,7 @@ write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
 {
 	unsigned		max;
 
-	max = usb_endpoint_maxp(ep->desc);
+	max = usb_endpoint_maxp(ep->ep.desc);
 	do {
 		unsigned	count;
 		int		is_last, is_short;
@@ -644,7 +643,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	}
 
 	ep = container_of(_ep, struct pxa25x_ep, ep);
-	if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+	if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) {
 		DMSG("%s, bad ep\n", __func__);
 		return -EINVAL;
 	}
@@ -660,7 +659,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	 * we can report per-packet status.  that also helps with dma.
 	 */
 	if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
-		        && req->req.length > usb_endpoint_maxp (ep->desc)))
+			&& req->req.length > usb_endpoint_maxp(ep->ep.desc)))
 		return -EMSGSIZE;
 
 	DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
@@ -673,7 +672,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 	/* kickstart this i/o queue? */
 	if (list_empty(&ep->queue) && !ep->stopped) {
-		if (ep->desc == NULL/* ep0 */) {
+		if (ep->ep.desc == NULL/* ep0 */) {
 			unsigned	length = _req->length;
 
 			switch (dev->ep0state) {
@@ -722,7 +721,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 			req = NULL;
 		}
 
-		if (likely (req && ep->desc))
+		if (likely(req && ep->ep.desc))
 			pio_irq_enable(ep->bEndpointAddress);
 	}
 
@@ -749,7 +748,7 @@ static void nuke(struct pxa25x_ep *ep, int status)
 				queue);
 		done(ep, req, status);
 	}
-	if (ep->desc)
+	if (ep->ep.desc)
 		pio_irq_disable (ep->bEndpointAddress);
 }
 
@@ -792,7 +791,7 @@ static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value)
 
 	ep = container_of(_ep, struct pxa25x_ep, ep);
 	if (unlikely (!_ep
-			|| (!ep->desc && ep->ep.name != ep0name))
+			|| (!ep->ep.desc && ep->ep.name != ep0name))
 			|| ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
 		DMSG("%s, bad ep\n", __func__);
 		return -EINVAL;
@@ -820,7 +819,7 @@ static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value)
 	*ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF;
 
 	/* ep0 needs special care */
-	if (!ep->desc) {
+	if (!ep->ep.desc) {
 		start_watchdog(ep->dev);
 		ep->dev->req_pending = 0;
 		ep->dev->ep0state = EP0_STALL;
@@ -1087,7 +1086,7 @@ udc_seq_show(struct seq_file *m, void *_d)
 		if (i != 0) {
 			const struct usb_endpoint_descriptor	*desc;
 
-			desc = ep->desc;
+			desc = ep->ep.desc;
 			if (!desc)
 				continue;
 			tmp = *dev->ep [i].reg_udccs;
@@ -1191,7 +1190,6 @@ static void udc_reinit(struct pxa25x_udc *dev)
 		if (i != 0)
 			list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
 
-		ep->desc = NULL;
 		ep->ep.desc = NULL;
 		ep->stopped = 0;
 		INIT_LIST_HEAD (&ep->queue);
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index 893e917f048e..861f4df6ea22 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -41,7 +41,6 @@ struct pxa25x_ep {
 	struct usb_ep				ep;
 	struct pxa25x_udc			*dev;
 
-	const struct usb_endpoint_descriptor	*desc;
 	struct list_head			queue;
 	unsigned long				pio_irqs;
 
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index c4401e7dd3a6..f3ac2a20c27c 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -459,7 +459,7 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 	unsigned char *counter;
 	int ret;
 
-	ep->desc = desc;
+	ep->ep.desc = desc;
 
 	if (ep->pipenum)	/* already allocated pipe  */
 		return 0;
@@ -648,7 +648,7 @@ static int sudmac_alloc_channel(struct r8a66597 *r8a66597,
 	/* set SUDMAC parameters */
 	dma = &r8a66597->dma;
 	dma->used = 1;
-	if (ep->desc->bEndpointAddress & USB_DIR_IN) {
+	if (ep->ep.desc->bEndpointAddress & USB_DIR_IN) {
 		dma->dir = 1;
 	} else {
 		dma->dir = 0;
@@ -770,7 +770,7 @@ static void start_packet_read(struct r8a66597_ep *ep,
 
 static void start_packet(struct r8a66597_ep *ep, struct r8a66597_request *req)
 {
-	if (ep->desc->bEndpointAddress & USB_DIR_IN)
+	if (ep->ep.desc->bEndpointAddress & USB_DIR_IN)
 		start_packet_write(ep, req);
 	else
 		start_packet_read(ep, req);
@@ -930,7 +930,7 @@ __acquires(r8a66597->lock)
 
 	if (restart) {
 		req = get_request_from_ep(ep);
-		if (ep->desc)
+		if (ep->ep.desc)
 			start_packet(ep, req);
 	}
 }
@@ -1116,7 +1116,7 @@ static void irq_pipe_ready(struct r8a66597 *r8a66597, u16 status, u16 enb)
 				r8a66597_write(r8a66597, ~check, BRDYSTS);
 				ep = r8a66597->pipenum2ep[pipenum];
 				req = get_request_from_ep(ep);
-				if (ep->desc->bEndpointAddress & USB_DIR_IN)
+				if (ep->ep.desc->bEndpointAddress & USB_DIR_IN)
 					irq_packet_write(ep, req);
 				else
 					irq_packet_read(ep, req);
@@ -1170,7 +1170,7 @@ __acquires(r8a66597->lock)
 
 	switch (ctrl->bRequestType & USB_RECIP_MASK) {
 	case USB_RECIP_DEVICE:
-		status = 1 << USB_DEVICE_SELF_POWERED;
+		status = r8a66597->device_status;
 		break;
 	case USB_RECIP_INTERFACE:
 		status = 0;
@@ -1627,7 +1627,7 @@ static int r8a66597_queue(struct usb_ep *_ep, struct usb_request *_req,
 	req->req.actual = 0;
 	req->req.status = -EINPROGRESS;
 
-	if (ep->desc == NULL)	/* control */
+	if (ep->ep.desc == NULL)	/* control */
 		start_ep0(ep, req);
 	else {
 		if (request && !ep->busy)
@@ -1692,7 +1692,7 @@ static int r8a66597_set_wedge(struct usb_ep *_ep)
 
 	ep = container_of(_ep, struct r8a66597_ep, ep);
 
-	if (!ep || !ep->desc)
+	if (!ep || !ep->ep.desc)
 		return -EINVAL;
 
 	spin_lock_irqsave(&ep->r8a66597->lock, flags);
@@ -1800,11 +1800,24 @@ static int r8a66597_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
+static int r8a66597_set_selfpowered(struct usb_gadget *gadget, int is_self)
+{
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
+
+	if (is_self)
+		r8a66597->device_status |= 1 << USB_DEVICE_SELF_POWERED;
+	else
+		r8a66597->device_status &= ~(1 << USB_DEVICE_SELF_POWERED);
+
+	return 0;
+}
+
 static struct usb_gadget_ops r8a66597_gadget_ops = {
 	.get_frame		= r8a66597_get_frame,
 	.udc_start		= r8a66597_start,
 	.udc_stop		= r8a66597_stop,
 	.pullup			= r8a66597_pullup,
+	.set_selfpowered	= r8a66597_set_selfpowered,
 };
 
 static int __exit r8a66597_remove(struct platform_device *pdev)
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 8e3de61cd4b8..99908c76ccd1 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -72,7 +72,7 @@ struct r8a66597_ep {
 	unsigned		use_dma:1;
 	u16			pipenum;
 	u16			type;
-	const struct usb_endpoint_descriptor	*desc;
+
 	/* register address */
 	unsigned char		fifoaddr;
 	unsigned char		fifosel;
@@ -111,6 +111,7 @@ struct r8a66597 {
 	u16			old_vbus;
 	u16			scount;
 	u16			old_dvsq;
+	u16			device_status;	/* for GET_STATUS */
 
 	/* pipe config */
 	unsigned char bulk;
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 105b206cd844..f4abb0ed9872 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -1,4 +1,5 @@
-/* linux/drivers/usb/gadget/s3c-hsotg.c
+/**
+ * linux/drivers/usb/gadget/s3c-hsotg.c
  *
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -13,7 +14,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -27,21 +28,25 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <mach/map.h>
 
-#include <plat/regs-usb-hsotg-phy.h>
-#include <plat/regs-usb-hsotg.h>
-#include <mach/regs-sys.h>
-#include <plat/udc-hs.h>
-#include <plat/cpu.h>
+#include "s3c-hsotg.h"
 
 #define DMA_ADDR_INVALID (~((dma_addr_t)0))
 
-/* EP0_MPS_LIMIT
+static const char * const s3c_hsotg_supply_names[] = {
+	"vusb_d",		/* digital USB supply, 1.2V */
+	"vusb_a",		/* analog USB supply, 1.1V */
+};
+
+/*
+ * EP0_MPS_LIMIT
  *
  * Unfortunately there seems to be a limit of the amount of data that can
  * be transferred by IN transactions on EP0. This is either 127 bytes or 3
@@ -125,8 +130,6 @@ struct s3c_hsotg_ep {
 	char			name[10];
 };
 
-#define S3C_HSOTG_EPS	(8+1)	/* limit to 9 for the moment */
-
 /**
  * struct s3c_hsotg - driver state.
  * @dev: The parent device supplied to the probe function
@@ -135,7 +138,9 @@ struct s3c_hsotg_ep {
  * @regs: The memory area mapped for accessing registers.
  * @regs_res: The resource that was allocated when claiming register space.
  * @irq: The IRQ number we are using
+ * @supplies: Definition of USB power supplies
  * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
+ * @num_of_eps: Number of available EPs (excluding EP0)
  * @debug_root: root directrory for debugfs.
  * @debug_file: main status file for debugfs.
  * @debug_fifo: FIFO status file for debugfs.
@@ -143,6 +148,8 @@ struct s3c_hsotg_ep {
  * @ep0_buff: Buffer for EP0 reply data, if needed.
  * @ctrl_buff: Buffer for EP0 control requests.
  * @ctrl_req: Request for EP0 control packets.
+ * @setup: NAK management for EP0 SETUP
+ * @last_rst: Time of last reset
  * @eps: The endpoints being supplied to the gadget framework
  */
 struct s3c_hsotg {
@@ -155,7 +162,10 @@ struct s3c_hsotg {
 	int			irq;
 	struct clk		*clk;
 
+	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
+
 	unsigned int		dedicated_fifos:1;
+	unsigned char           num_of_eps;
 
 	struct dentry		*debug_root;
 	struct dentry		*debug_file;
@@ -167,7 +177,9 @@ struct s3c_hsotg {
 	u8			ctrl_buff[8];
 
 	struct usb_gadget	gadget;
-	struct s3c_hsotg_ep	eps[];
+	unsigned int		setup;
+	unsigned long           last_rst;
+	struct s3c_hsotg_ep	*eps;
 };
 
 /**
@@ -244,14 +256,14 @@ static inline bool using_dma(struct s3c_hsotg *hsotg)
  */
 static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
 {
-	u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
+	u32 gsintmsk = readl(hsotg->regs + GINTMSK);
 	u32 new_gsintmsk;
 
 	new_gsintmsk = gsintmsk | ints;
 
 	if (new_gsintmsk != gsintmsk) {
 		dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
-		writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
+		writel(new_gsintmsk, hsotg->regs + GINTMSK);
 	}
 }
 
@@ -262,13 +274,13 @@ static void s3c_hsotg_en_gsint(struct s3c_hsotg *hsotg, u32 ints)
  */
 static void s3c_hsotg_disable_gsint(struct s3c_hsotg *hsotg, u32 ints)
 {
-	u32 gsintmsk = readl(hsotg->regs + S3C_GINTMSK);
+	u32 gsintmsk = readl(hsotg->regs + GINTMSK);
 	u32 new_gsintmsk;
 
 	new_gsintmsk = gsintmsk & ~ints;
 
 	if (new_gsintmsk != gsintmsk)
-		writel(new_gsintmsk, hsotg->regs + S3C_GINTMSK);
+		writel(new_gsintmsk, hsotg->regs + GINTMSK);
 }
 
 /**
@@ -293,12 +305,12 @@ static void s3c_hsotg_ctrl_epint(struct s3c_hsotg *hsotg,
 		bit <<= 16;
 
 	local_irq_save(flags);
-	daint = readl(hsotg->regs + S3C_DAINTMSK);
+	daint = readl(hsotg->regs + DAINTMSK);
 	if (en)
 		daint |= bit;
 	else
 		daint &= ~bit;
-	writel(daint, hsotg->regs + S3C_DAINTMSK);
+	writel(daint, hsotg->regs + DAINTMSK);
 	local_irq_restore(flags);
 }
 
@@ -314,52 +326,51 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
 	int timeout;
 	u32 val;
 
-	/* the ryu 2.6.24 release ahs
-	   writel(0x1C0, hsotg->regs + S3C_GRXFSIZ);
-	   writel(S3C_GNPTXFSIZ_NPTxFStAddr(0x200) |
-		S3C_GNPTXFSIZ_NPTxFDep(0x1C0),
-		hsotg->regs + S3C_GNPTXFSIZ);
-	*/
-
 	/* set FIFO sizes to 2048/1024 */
 
-	writel(2048, hsotg->regs + S3C_GRXFSIZ);
-	writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) |
-	       S3C_GNPTXFSIZ_NPTxFDep(1024),
-	       hsotg->regs + S3C_GNPTXFSIZ);
+	writel(2048, hsotg->regs + GRXFSIZ);
+	writel(GNPTXFSIZ_NPTxFStAddr(2048) |
+	       GNPTXFSIZ_NPTxFDep(1024),
+	       hsotg->regs + GNPTXFSIZ);
 
-	/* arange all the rest of the TX FIFOs, as some versions of this
+	/*
+	 * arange all the rest of the TX FIFOs, as some versions of this
 	 * block have overlapping default addresses. This also ensures
 	 * that if the settings have been changed, then they are set to
-	 * known values. */
+	 * known values.
+	 */
 
 	/* start at the end of the GNPTXFSIZ, rounded up */
 	addr = 2048 + 1024;
 	size = 768;
 
-	/* currently we allocate TX FIFOs for all possible endpoints,
-	 * and assume that they are all the same size. */
+	/*
+	 * currently we allocate TX FIFOs for all possible endpoints,
+	 * and assume that they are all the same size.
+	 */
 
 	for (ep = 1; ep <= 15; ep++) {
 		val = addr;
-		val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT;
+		val |= size << DPTXFSIZn_DPTxFSize_SHIFT;
 		addr += size;
 
-		writel(val, hsotg->regs + S3C_DPTXFSIZn(ep));
+		writel(val, hsotg->regs + DPTXFSIZn(ep));
 	}
 
-	/* according to p428 of the design guide, we need to ensure that
-	 * all fifos are flushed before continuing */
+	/*
+	 * according to p428 of the design guide, we need to ensure that
+	 * all fifos are flushed before continuing
+	 */
 
-	writel(S3C_GRSTCTL_TxFNum(0x10) | S3C_GRSTCTL_TxFFlsh |
-	       S3C_GRSTCTL_RxFFlsh, hsotg->regs + S3C_GRSTCTL);
+	writel(GRSTCTL_TxFNum(0x10) | GRSTCTL_TxFFlsh |
+	       GRSTCTL_RxFFlsh, hsotg->regs + GRSTCTL);
 
 	/* wait until the fifos are both flushed */
 	timeout = 100;
 	while (1) {
-		val = readl(hsotg->regs + S3C_GRSTCTL);
+		val = readl(hsotg->regs + GRSTCTL);
 
-		if ((val & (S3C_GRSTCTL_TxFFlsh | S3C_GRSTCTL_RxFFlsh)) == 0)
+		if ((val & (GRSTCTL_TxFFlsh | GRSTCTL_RxFFlsh)) == 0)
 			break;
 
 		if (--timeout == 0) {
@@ -415,7 +426,7 @@ static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep)
  *
  * This is the reverse of s3c_hsotg_map_dma(), called for the completion
  * of a request to ensure the buffer is ready for access by the caller.
-*/
+ */
 static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
 				struct s3c_hsotg_ep *hs_ep,
 				struct s3c_hsotg_req *hs_req)
@@ -456,13 +467,13 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
  * otherwise -ENOSPC is returned if the FIFO space was used up.
  *
  * This routine is only needed for PIO
-*/
+ */
 static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 				struct s3c_hsotg_ep *hs_ep,
 				struct s3c_hsotg_req *hs_req)
 {
 	bool periodic = is_ep_periodic(hs_ep);
-	u32 gnptxsts = readl(hsotg->regs + S3C_GNPTXSTS);
+	u32 gnptxsts = readl(hsotg->regs + GNPTXSTS);
 	int buf_pos = hs_req->req.actual;
 	int to_write = hs_ep->size_loaded;
 	void *data;
@@ -476,20 +487,23 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 		return 0;
 
 	if (periodic && !hsotg->dedicated_fifos) {
-		u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
+		u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
 		int size_left;
 		int size_done;
 
-		/* work out how much data was loaded so we can calculate
-		 * how much data is left in the fifo. */
+		/*
+		 * work out how much data was loaded so we can calculate
+		 * how much data is left in the fifo.
+		 */
 
-		size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+		size_left = DxEPTSIZ_XferSize_GET(epsize);
 
-		/* if shared fifo, we cannot write anything until the
+		/*
+		 * if shared fifo, we cannot write anything until the
 		 * previous data has been completely sent.
 		 */
 		if (hs_ep->fifo_load != 0) {
-			s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+			s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp);
 			return -ENOSPC;
 		}
 
@@ -510,47 +524,50 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 			__func__, can_write);
 
 		if (can_write <= 0) {
-			s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+			s3c_hsotg_en_gsint(hsotg, GINTSTS_PTxFEmp);
 			return -ENOSPC;
 		}
 	} else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
-		can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index));
+		can_write = readl(hsotg->regs + DTXFSTS(hs_ep->index));
 
 		can_write &= 0xffff;
 		can_write *= 4;
 	} else {
-		if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) {
+		if (GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) {
 			dev_dbg(hsotg->dev,
 				"%s: no queue slots available (0x%08x)\n",
 				__func__, gnptxsts);
 
-			s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
+			s3c_hsotg_en_gsint(hsotg, GINTSTS_NPTxFEmp);
 			return -ENOSPC;
 		}
 
-		can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts);
+		can_write = GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts);
 		can_write *= 4;	/* fifo size is in 32bit quantities. */
 	}
 
 	dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n",
 		 __func__, gnptxsts, can_write, to_write, hs_ep->ep.maxpacket);
 
-	/* limit to 512 bytes of data, it seems at least on the non-periodic
+	/*
+	 * limit to 512 bytes of data, it seems at least on the non-periodic
 	 * FIFO, requests of >512 cause the endpoint to get stuck with a
 	 * fragment of the end of the transfer in it.
 	 */
 	if (can_write > 512)
 		can_write = 512;
 
-	/* limit the write to one max-packet size worth of data, but allow
+	/*
+	 * limit the write to one max-packet size worth of data, but allow
 	 * the transfer to return that it did not run out of fifo space
-	 * doing it. */
+	 * doing it.
+	 */
 	if (to_write > hs_ep->ep.maxpacket) {
 		to_write = hs_ep->ep.maxpacket;
 
 		s3c_hsotg_en_gsint(hsotg,
-				   periodic ? S3C_GINTSTS_PTxFEmp :
-				   S3C_GINTSTS_NPTxFEmp);
+				   periodic ? GINTSTS_PTxFEmp :
+				   GINTSTS_NPTxFEmp);
 	}
 
 	/* see if we can write data */
@@ -559,8 +576,8 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 		to_write = can_write;
 		pkt_round = to_write % hs_ep->ep.maxpacket;
 
-		/* Not sure, but we probably shouldn't be writing partial
-		 * packets into the FIFO, so round the write down to an
+		/*
+		 * Round the write down to an
 		 * exact number of packets.
 		 *
 		 * Note, we do not currently check to see if we can ever
@@ -570,12 +587,14 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 		if (pkt_round)
 			to_write -= pkt_round;
 
-		/* enable correct FIFO interrupt to alert us when there
-		 * is more room left. */
+		/*
+		 * enable correct FIFO interrupt to alert us when there
+		 * is more room left.
+		 */
 
 		s3c_hsotg_en_gsint(hsotg,
-				   periodic ? S3C_GINTSTS_PTxFEmp :
-				   S3C_GINTSTS_NPTxFEmp);
+				   periodic ? GINTSTS_PTxFEmp :
+				   GINTSTS_NPTxFEmp);
 	}
 
 	dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
@@ -593,7 +612,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg,
 	to_write = DIV_ROUND_UP(to_write, 4);
 	data = hs_req->req.buf + buf_pos;
 
-	writesl(hsotg->regs + S3C_EPFIFO(hs_ep->index), data, to_write);
+	writesl(hsotg->regs + EPFIFO(hs_ep->index), data, to_write);
 
 	return (to_write >= can_write) ? -ENOSPC : 0;
 }
@@ -612,12 +631,12 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
 	unsigned maxpkt;
 
 	if (index != 0) {
-		maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1;
-		maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1;
+		maxsize = DxEPTSIZ_XferSize_LIMIT + 1;
+		maxpkt = DxEPTSIZ_PktCnt_LIMIT + 1;
 	} else {
 		maxsize = 64+64;
 		if (hs_ep->dir_in)
-			maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1;
+			maxpkt = DIEPTSIZ0_PktCnt_LIMIT + 1;
 		else
 			maxpkt = 2;
 	}
@@ -626,8 +645,10 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep)
 	maxpkt--;
 	maxsize--;
 
-	/* constrain by packet count if maxpkts*pktsize is greater
-	 * than the length register size. */
+	/*
+	 * constrain by packet count if maxpkts*pktsize is greater
+	 * than the length register size.
+	 */
 
 	if ((maxpkt * hs_ep->ep.maxpacket) < maxsize)
 		maxsize = maxpkt * hs_ep->ep.maxpacket;
@@ -674,8 +695,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 		}
 	}
 
-	epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
-	epsize_reg = dir_in ? S3C_DIEPTSIZ(index) : S3C_DOEPTSIZ(index);
+	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
+	epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index);
 
 	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
 		__func__, readl(hsotg->regs + epctrl_reg), index,
@@ -684,13 +705,14 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 	/* If endpoint is stalled, we will restart request later */
 	ctrl = readl(hsotg->regs + epctrl_reg);
 
-	if (ctrl & S3C_DxEPCTL_Stall) {
+	if (ctrl & DxEPCTL_Stall) {
 		dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
 		return;
 	}
 
 	length = ureq->length - ureq->actual;
-
+	dev_dbg(hsotg->dev, "ureq->length:%d ureq->actual:%d\n",
+		ureq->length, ureq->actual);
 	if (0)
 		dev_dbg(hsotg->dev,
 			"REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n",
@@ -717,20 +739,22 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 		packets = 1;	/* send one packet if length is zero. */
 
 	if (dir_in && index != 0)
-		epsize = S3C_DxEPTSIZ_MC(1);
+		epsize = DxEPTSIZ_MC(1);
 	else
 		epsize = 0;
 
 	if (index != 0 && ureq->zero) {
-		/* test for the packets being exactly right for the
-		 * transfer */
+		/*
+		 * test for the packets being exactly right for the
+		 * transfer
+		 */
 
 		if (length == (packets * hs_ep->ep.maxpacket))
 			packets++;
 	}
 
-	epsize |= S3C_DxEPTSIZ_PktCnt(packets);
-	epsize |= S3C_DxEPTSIZ_XferSize(length);
+	epsize |= DxEPTSIZ_PktCnt(packets);
+	epsize |= DxEPTSIZ_XferSize(length);
 
 	dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n",
 		__func__, packets, length, ureq->length, epsize, epsize_reg);
@@ -744,26 +768,38 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 	if (using_dma(hsotg) && !continuing) {
 		unsigned int dma_reg;
 
-		/* write DMA address to control register, buffer already
-		 * synced by s3c_hsotg_ep_queue().  */
+		/*
+		 * write DMA address to control register, buffer already
+		 * synced by s3c_hsotg_ep_queue().
+		 */
 
-		dma_reg = dir_in ? S3C_DIEPDMA(index) : S3C_DOEPDMA(index);
+		dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index);
 		writel(ureq->dma, hsotg->regs + dma_reg);
 
 		dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n",
 			__func__, ureq->dma, dma_reg);
 	}
 
-	ctrl |= S3C_DxEPCTL_EPEna;	/* ensure ep enabled */
-	ctrl |= S3C_DxEPCTL_USBActEp;
-	ctrl |= S3C_DxEPCTL_CNAK;	/* clear NAK set by core */
+	ctrl |= DxEPCTL_EPEna;	/* ensure ep enabled */
+	ctrl |= DxEPCTL_USBActEp;
+
+	dev_dbg(hsotg->dev, "setup req:%d\n", hsotg->setup);
+
+	/* For Setup request do not clear NAK */
+	if (hsotg->setup && index == 0)
+		hsotg->setup = 0;
+	else
+		ctrl |= DxEPCTL_CNAK;	/* clear NAK set by core */
+
 
 	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
 	writel(ctrl, hsotg->regs + epctrl_reg);
 
-	/* set these, it seems that DMA support increments past the end
+	/*
+	 * set these, it seems that DMA support increments past the end
 	 * of the packet buffer so we need to calculate the length from
-	 * this information. */
+	 * this information.
+	 */
 	hs_ep->size_loaded = length;
 	hs_ep->last_load = ureq->actual;
 
@@ -774,17 +810,21 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
 		s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req);
 	}
 
-	/* clear the INTknTXFEmpMsk when we start request, more as a aide
-	 * to debugging to see what is going on. */
+	/*
+	 * clear the INTknTXFEmpMsk when we start request, more as a aide
+	 * to debugging to see what is going on.
+	 */
 	if (dir_in)
-		writel(S3C_DIEPMSK_INTknTXFEmpMsk,
-		       hsotg->regs + S3C_DIEPINT(index));
+		writel(DIEPMSK_INTknTXFEmpMsk,
+		       hsotg->regs + DIEPINT(index));
 
-	/* Note, trying to clear the NAK here causes problems with transmit
-	 * on the S3C6400 ending up with the TXFIFO becoming full. */
+	/*
+	 * Note, trying to clear the NAK here causes problems with transmit
+	 * on the S3C6400 ending up with the TXFIFO becoming full.
+	 */
 
 	/* check ep is enabled */
-	if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
+	if (!(readl(hsotg->regs + epctrl_reg) & DxEPCTL_EPEna))
 		dev_warn(hsotg->dev,
 			 "ep%d: failed to become enabled (DxEPCTL=0x%08x)?\n",
 			 index, readl(hsotg->regs + epctrl_reg));
@@ -804,7 +844,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
  * then ensure the buffer has been synced to memory. If our buffer has no
  * DMA memory, then we map the memory and mark our request to allow us to
  * cleanup on completion.
-*/
+ */
 static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg,
 			     struct s3c_hsotg_ep *hs_ep,
 			     struct usb_request *req)
@@ -922,7 +962,7 @@ static void s3c_hsotg_complete_oursetup(struct usb_ep *ep,
  *
  * Convert the given wIndex into a pointer to an driver endpoint
  * structure, or return NULL if it is not a valid endpoint.
-*/
+ */
 static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
 					   u32 windex)
 {
@@ -933,7 +973,7 @@ static struct s3c_hsotg_ep *ep_from_windex(struct s3c_hsotg *hsotg,
 	if (windex >= 0x100)
 		return NULL;
 
-	if (idx > S3C_HSOTG_EPS)
+	if (idx > hsotg->num_of_eps)
 		return NULL;
 
 	if (idx && ep->dir_in != dir)
@@ -1151,24 +1191,28 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
 		 ctrl->bRequest, ctrl->bRequestType,
 		 ctrl->wValue, ctrl->wLength);
 
-	/* record the direction of the request, for later use when enquing
-	 * packets onto EP0. */
+	/*
+	 * record the direction of the request, for later use when enquing
+	 * packets onto EP0.
+	 */
 
 	ep0->dir_in = (ctrl->bRequestType & USB_DIR_IN) ? 1 : 0;
 	dev_dbg(hsotg->dev, "ctrl: dir_in=%d\n", ep0->dir_in);
 
-	/* if we've no data with this request, then the last part of the
-	 * transaction is going to implicitly be IN. */
+	/*
+	 * if we've no data with this request, then the last part of the
+	 * transaction is going to implicitly be IN.
+	 */
 	if (ctrl->wLength == 0)
 		ep0->dir_in = 1;
 
 	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
 		switch (ctrl->bRequest) {
 		case USB_REQ_SET_ADDRESS:
-			dcfg = readl(hsotg->regs + S3C_DCFG);
-			dcfg &= ~S3C_DCFG_DevAddr_MASK;
-			dcfg |= ctrl->wValue << S3C_DCFG_DevAddr_SHIFT;
-			writel(dcfg, hsotg->regs + S3C_DCFG);
+			dcfg = readl(hsotg->regs + DCFG);
+			dcfg &= ~DCFG_DevAddr_MASK;
+			dcfg |= ctrl->wValue << DCFG_DevAddr_SHIFT;
+			writel(dcfg, hsotg->regs + DCFG);
 
 			dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
 
@@ -1194,7 +1238,8 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
 			dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
 	}
 
-	/* the request is either unhandlable, or is not formatted correctly
+	/*
+	 * the request is either unhandlable, or is not formatted correctly
 	 * so respond with a STALL for the status stage to indicate failure.
 	 */
 
@@ -1203,22 +1248,26 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
 		u32 ctrl;
 
 		dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
-		reg = (ep0->dir_in) ? S3C_DIEPCTL0 : S3C_DOEPCTL0;
+		reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0;
 
-		/* S3C_DxEPCTL_Stall will be cleared by EP once it has
-		 * taken effect, so no need to clear later. */
+		/*
+		 * DxEPCTL_Stall will be cleared by EP once it has
+		 * taken effect, so no need to clear later.
+		 */
 
 		ctrl = readl(hsotg->regs + reg);
-		ctrl |= S3C_DxEPCTL_Stall;
-		ctrl |= S3C_DxEPCTL_CNAK;
+		ctrl |= DxEPCTL_Stall;
+		ctrl |= DxEPCTL_CNAK;
 		writel(ctrl, hsotg->regs + reg);
 
 		dev_dbg(hsotg->dev,
 			"written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
 			ctrl, reg, readl(hsotg->regs + reg));
 
-		/* don't believe we need to anything more to get the EP
-		 * to reply with a STALL packet */
+		/*
+		 * don't believe we need to anything more to get the EP
+		 * to reply with a STALL packet
+		 */
 	}
 }
 
@@ -1279,8 +1328,10 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
 	ret = s3c_hsotg_ep_queue(&hsotg->eps[0].ep, req, GFP_ATOMIC);
 	if (ret < 0) {
 		dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret);
-		/* Don't think there's much we can do other than watch the
-		 * driver fail. */
+		/*
+		 * Don't think there's much we can do other than watch the
+		 * driver fail.
+		 */
 	}
 }
 
@@ -1296,7 +1347,7 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg)
  * on the endpoint.
  *
  * Note, expects the ep to already be locked as appropriate.
-*/
+ */
 static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
 				       struct s3c_hsotg_ep *hs_ep,
 				       struct s3c_hsotg_req *hs_req,
@@ -1312,8 +1363,10 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
 	dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n",
 		hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete);
 
-	/* only replace the status if we've not already set an error
-	 * from a previous transaction */
+	/*
+	 * only replace the status if we've not already set an error
+	 * from a previous transaction
+	 */
 
 	if (hs_req->req.status == -EINPROGRESS)
 		hs_req->req.status = result;
@@ -1324,8 +1377,10 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
 	if (using_dma(hsotg))
 		s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req);
 
-	/* call the complete request with the locks off, just in case the
-	 * request tries to queue more work for this endpoint. */
+	/*
+	 * call the complete request with the locks off, just in case the
+	 * request tries to queue more work for this endpoint.
+	 */
 
 	if (hs_req->req.complete) {
 		spin_unlock(&hs_ep->lock);
@@ -1333,9 +1388,11 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
 		spin_lock(&hs_ep->lock);
 	}
 
-	/* Look to see if there is anything else to do. Note, the completion
+	/*
+	 * Look to see if there is anything else to do. Note, the completion
 	 * of the previous request may have caused a new request to be started
-	 * so be careful when doing this. */
+	 * so be careful when doing this.
+	 */
 
 	if (!hs_ep->req && result >= 0) {
 		restart = !list_empty(&hs_ep->queue);
@@ -1355,7 +1412,7 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
  *
  * See s3c_hsotg_complete_request(), but called with the endpoint's
  * lock held.
-*/
+ */
 static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg,
 					    struct s3c_hsotg_ep *hs_ep,
 					    struct s3c_hsotg_req *hs_req,
@@ -1382,13 +1439,13 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 {
 	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[ep_idx];
 	struct s3c_hsotg_req *hs_req = hs_ep->req;
-	void __iomem *fifo = hsotg->regs + S3C_EPFIFO(ep_idx);
+	void __iomem *fifo = hsotg->regs + EPFIFO(ep_idx);
 	int to_read;
 	int max_req;
 	int read_ptr;
 
 	if (!hs_req) {
-		u32 epctl = readl(hsotg->regs + S3C_DOEPCTL(ep_idx));
+		u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx));
 		int ptr;
 
 		dev_warn(hsotg->dev,
@@ -1412,7 +1469,8 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 		__func__, to_read, max_req, read_ptr, hs_req->req.length);
 
 	if (to_read > max_req) {
-		/* more data appeared than we where willing
+		/*
+		 * more data appeared than we where willing
 		 * to deal with in this request.
 		 */
 
@@ -1424,8 +1482,10 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
 	hs_req->req.actual += to_read;
 	to_read = DIV_ROUND_UP(to_read, 4);
 
-	/* note, we might over-write the buffer end by 3 bytes depending on
-	 * alignment of the data. */
+	/*
+	 * note, we might over-write the buffer end by 3 bytes depending on
+	 * alignment of the data.
+	 */
 	readsl(fifo, hs_req->req.buf + read_ptr, to_read);
 
 	spin_unlock(&hs_ep->lock);
@@ -1465,14 +1525,14 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
 	dev_dbg(hsotg->dev, "sending zero-length packet\n");
 
 	/* issue a zero-sized packet to terminate this */
-	writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
-	       S3C_DxEPTSIZ_XferSize(0), hsotg->regs + S3C_DIEPTSIZ(0));
+	writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) |
+	       DxEPTSIZ_XferSize(0), hsotg->regs + DIEPTSIZ(0));
 
-	ctrl = readl(hsotg->regs + S3C_DIEPCTL0);
-	ctrl |= S3C_DxEPCTL_CNAK;  /* clear NAK set by core */
-	ctrl |= S3C_DxEPCTL_EPEna; /* ensure ep enabled */
-	ctrl |= S3C_DxEPCTL_USBActEp;
-	writel(ctrl, hsotg->regs + S3C_DIEPCTL0);
+	ctrl = readl(hsotg->regs + DIEPCTL0);
+	ctrl |= DxEPCTL_CNAK;  /* clear NAK set by core */
+	ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */
+	ctrl |= DxEPCTL_USBActEp;
+	writel(ctrl, hsotg->regs + DIEPCTL0);
 }
 
 /**
@@ -1484,15 +1544,15 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
  * The RXFIFO has delivered an OutDone event, which means that the data
  * transfer for an OUT endpoint has been completed, either by a short
  * packet or by the finish of a transfer.
-*/
+ */
 static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
 				     int epnum, bool was_setup)
 {
-	u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum));
+	u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum));
 	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum];
 	struct s3c_hsotg_req *hs_req = hs_ep->req;
 	struct usb_request *req = &hs_req->req;
-	unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+	unsigned size_left = DxEPTSIZ_XferSize_GET(epsize);
 	int result = 0;
 
 	if (!hs_req) {
@@ -1503,7 +1563,8 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
 	if (using_dma(hsotg)) {
 		unsigned size_done;
 
-		/* Calculate the size of the transfer by checking how much
+		/*
+		 * Calculate the size of the transfer by checking how much
 		 * is left in the endpoint size register and then working it
 		 * out from the amount we loaded for the transfer.
 		 *
@@ -1521,17 +1582,29 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
 	if (req->actual < req->length && size_left == 0) {
 		s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true);
 		return;
+	} else if (epnum == 0) {
+		/*
+		 * After was_setup = 1 =>
+		 * set CNAK for non Setup requests
+		 */
+		hsotg->setup = was_setup ? 0 : 1;
 	}
 
 	if (req->actual < req->length && req->short_not_ok) {
 		dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
 			__func__, req->actual, req->length);
 
-		/* todo - what should we return here? there's no one else
-		 * even bothering to check the status. */
+		/*
+		 * todo - what should we return here? there's no one else
+		 * even bothering to check the status.
+		 */
 	}
 
 	if (epnum == 0) {
+		/*
+		 * Condition req->complete != s3c_hsotg_complete_setup says:
+		 * send ZLP when we have an asynchronous request from gadget
+		 */
 		if (!was_setup && req->complete != s3c_hsotg_complete_setup)
 			s3c_hsotg_send_zlp(hsotg, hs_req);
 	}
@@ -1544,14 +1617,14 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg,
  * @hsotg: The device instance
  *
  * Return the current frame number
-*/
+ */
 static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
 {
 	u32 dsts;
 
-	dsts = readl(hsotg->regs + S3C_DSTS);
-	dsts &= S3C_DSTS_SOFFN_MASK;
-	dsts >>= S3C_DSTS_SOFFN_SHIFT;
+	dsts = readl(hsotg->regs + DSTS);
+	dsts &= DSTS_SOFFN_MASK;
+	dsts >>= DSTS_SOFFN_SHIFT;
 
 	return dsts;
 }
@@ -1574,29 +1647,29 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
  */
 static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
 {
-	u32 grxstsr = readl(hsotg->regs + S3C_GRXSTSP);
+	u32 grxstsr = readl(hsotg->regs + GRXSTSP);
 	u32 epnum, status, size;
 
 	WARN_ON(using_dma(hsotg));
 
-	epnum = grxstsr & S3C_GRXSTS_EPNum_MASK;
-	status = grxstsr & S3C_GRXSTS_PktSts_MASK;
+	epnum = grxstsr & GRXSTS_EPNum_MASK;
+	status = grxstsr & GRXSTS_PktSts_MASK;
 
-	size = grxstsr & S3C_GRXSTS_ByteCnt_MASK;
-	size >>= S3C_GRXSTS_ByteCnt_SHIFT;
+	size = grxstsr & GRXSTS_ByteCnt_MASK;
+	size >>= GRXSTS_ByteCnt_SHIFT;
 
 	if (1)
 		dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n",
 			__func__, grxstsr, size, epnum);
 
-#define __status(x) ((x) >> S3C_GRXSTS_PktSts_SHIFT)
+#define __status(x) ((x) >> GRXSTS_PktSts_SHIFT)
 
-	switch (status >> S3C_GRXSTS_PktSts_SHIFT) {
-	case __status(S3C_GRXSTS_PktSts_GlobalOutNAK):
+	switch (status >> GRXSTS_PktSts_SHIFT) {
+	case __status(GRXSTS_PktSts_GlobalOutNAK):
 		dev_dbg(hsotg->dev, "GlobalOutNAK\n");
 		break;
 
-	case __status(S3C_GRXSTS_PktSts_OutDone):
+	case __status(GRXSTS_PktSts_OutDone):
 		dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n",
 			s3c_hsotg_read_frameno(hsotg));
 
@@ -1604,24 +1677,24 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
 			s3c_hsotg_handle_outdone(hsotg, epnum, false);
 		break;
 
-	case __status(S3C_GRXSTS_PktSts_SetupDone):
+	case __status(GRXSTS_PktSts_SetupDone):
 		dev_dbg(hsotg->dev,
 			"SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
 			s3c_hsotg_read_frameno(hsotg),
-			readl(hsotg->regs + S3C_DOEPCTL(0)));
+			readl(hsotg->regs + DOEPCTL(0)));
 
 		s3c_hsotg_handle_outdone(hsotg, epnum, true);
 		break;
 
-	case __status(S3C_GRXSTS_PktSts_OutRX):
+	case __status(GRXSTS_PktSts_OutRX):
 		s3c_hsotg_rx_data(hsotg, epnum, size);
 		break;
 
-	case __status(S3C_GRXSTS_PktSts_SetupRX):
+	case __status(GRXSTS_PktSts_SetupRX):
 		dev_dbg(hsotg->dev,
 			"SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
 			s3c_hsotg_read_frameno(hsotg),
-			readl(hsotg->regs + S3C_DOEPCTL(0)));
+			readl(hsotg->regs + DOEPCTL(0)));
 
 		s3c_hsotg_rx_data(hsotg, epnum, size);
 		break;
@@ -1638,18 +1711,18 @@ static void s3c_hsotg_handle_rx(struct s3c_hsotg *hsotg)
 /**
  * s3c_hsotg_ep0_mps - turn max packet size into register setting
  * @mps: The maximum packet size in bytes.
-*/
+ */
 static u32 s3c_hsotg_ep0_mps(unsigned int mps)
 {
 	switch (mps) {
 	case 64:
-		return S3C_D0EPCTL_MPS_64;
+		return D0EPCTL_MPS_64;
 	case 32:
-		return S3C_D0EPCTL_MPS_32;
+		return D0EPCTL_MPS_32;
 	case 16:
-		return S3C_D0EPCTL_MPS_16;
+		return D0EPCTL_MPS_16;
 	case 8:
-		return S3C_D0EPCTL_MPS_8;
+		return D0EPCTL_MPS_8;
 	}
 
 	/* bad max packet size, warn and return invalid result */
@@ -1680,7 +1753,7 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
 		if (mpsval > 3)
 			goto bad_mps;
 	} else {
-		if (mps >= S3C_DxEPCTL_MPS_LIMIT+1)
+		if (mps >= DxEPCTL_MPS_LIMIT+1)
 			goto bad_mps;
 
 		mpsval = mps;
@@ -1688,19 +1761,21 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg,
 
 	hs_ep->ep.maxpacket = mps;
 
-	/* update both the in and out endpoint controldir_ registers, even
-	 * if one of the directions may not be in use. */
+	/*
+	 * update both the in and out endpoint controldir_ registers, even
+	 * if one of the directions may not be in use.
+	 */
 
-	reg = readl(regs + S3C_DIEPCTL(ep));
-	reg &= ~S3C_DxEPCTL_MPS_MASK;
+	reg = readl(regs + DIEPCTL(ep));
+	reg &= ~DxEPCTL_MPS_MASK;
 	reg |= mpsval;
-	writel(reg, regs + S3C_DIEPCTL(ep));
+	writel(reg, regs + DIEPCTL(ep));
 
 	if (ep) {
-		reg = readl(regs + S3C_DOEPCTL(ep));
-		reg &= ~S3C_DxEPCTL_MPS_MASK;
+		reg = readl(regs + DOEPCTL(ep));
+		reg &= ~DxEPCTL_MPS_MASK;
 		reg |= mpsval;
-		writel(reg, regs + S3C_DOEPCTL(ep));
+		writel(reg, regs + DOEPCTL(ep));
 	}
 
 	return;
@@ -1719,16 +1794,16 @@ static void s3c_hsotg_txfifo_flush(struct s3c_hsotg *hsotg, unsigned int idx)
 	int timeout;
 	int val;
 
-	writel(S3C_GRSTCTL_TxFNum(idx) | S3C_GRSTCTL_TxFFlsh,
-		hsotg->regs + S3C_GRSTCTL);
+	writel(GRSTCTL_TxFNum(idx) | GRSTCTL_TxFFlsh,
+		hsotg->regs + GRSTCTL);
 
 	/* wait until the fifo is flushed */
 	timeout = 100;
 
 	while (1) {
-		val = readl(hsotg->regs + S3C_GRSTCTL);
+		val = readl(hsotg->regs + GRSTCTL);
 
-		if ((val & (S3C_GRSTCTL_TxFFlsh)) == 0)
+		if ((val & (GRSTCTL_TxFFlsh)) == 0)
 			break;
 
 		if (--timeout == 0) {
@@ -1778,7 +1853,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
 				  struct s3c_hsotg_ep *hs_ep)
 {
 	struct s3c_hsotg_req *hs_req = hs_ep->req;
-	u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index));
+	u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
 	int size_left, size_done;
 
 	if (!hs_req) {
@@ -1786,7 +1861,15 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
 		return;
 	}
 
-	/* Calculate the size of the transfer by checking how much is left
+	/* Finish ZLP handling for IN EP0 transactions */
+	if (hsotg->eps[0].sent_zlp) {
+		dev_dbg(hsotg->dev, "zlp packet received\n");
+		s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0);
+		return;
+	}
+
+	/*
+	 * Calculate the size of the transfer by checking how much is left
 	 * in the endpoint size register and then working it out from
 	 * the amount we loaded for the transfer.
 	 *
@@ -1795,7 +1878,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
 	 * aligned).
 	 */
 
-	size_left = S3C_DxEPTSIZ_XferSize_GET(epsize);
+	size_left = DxEPTSIZ_XferSize_GET(epsize);
 
 	size_done = hs_ep->size_loaded - size_left;
 	size_done += hs_ep->last_load;
@@ -1805,9 +1888,28 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
 			__func__, hs_req->req.actual, size_done);
 
 	hs_req->req.actual = size_done;
+	dev_dbg(hsotg->dev, "req->length:%d req->actual:%d req->zero:%d\n",
+		hs_req->req.length, hs_req->req.actual, hs_req->req.zero);
+
+	/*
+	 * Check if dealing with Maximum Packet Size(MPS) IN transfer at EP0
+	 * When sent data is a multiple MPS size (e.g. 64B ,128B ,192B
+	 * ,256B ... ), after last MPS sized packet send IN ZLP packet to
+	 * inform the host that no more data is available.
+	 * The state of req.zero member is checked to be sure that the value to
+	 * send is smaller than wValue expected from host.
+	 * Check req.length to NOT send another ZLP when the current one is
+	 * under completion (the one for which this completion has been called).
+	 */
+	if (hs_req->req.length && hs_ep->index == 0 && hs_req->req.zero &&
+	    hs_req->req.length == hs_req->req.actual &&
+	    !(hs_req->req.length % hs_ep->ep.maxpacket)) {
 
-	/* if we did all of the transfer, and there is more data left
-	 * around, then try restarting the rest of the request */
+		dev_dbg(hsotg->dev, "ep0 zlp IN packet sent\n");
+		s3c_hsotg_send_zlp(hsotg, hs_req);
+
+		return;
+	}
 
 	if (!size_left && hs_req->req.actual < hs_req->req.length) {
 		dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
@@ -1823,14 +1925,14 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg,
  * @dir_in: Set if this is an IN endpoint
  *
  * Process and clear any interrupt pending for an individual endpoint
-*/
+ */
 static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 			    int dir_in)
 {
 	struct s3c_hsotg_ep *hs_ep = &hsotg->eps[idx];
-	u32 epint_reg = dir_in ? S3C_DIEPINT(idx) : S3C_DOEPINT(idx);
-	u32 epctl_reg = dir_in ? S3C_DIEPCTL(idx) : S3C_DOEPCTL(idx);
-	u32 epsiz_reg = dir_in ? S3C_DIEPTSIZ(idx) : S3C_DOEPTSIZ(idx);
+	u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx);
+	u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
+	u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx);
 	u32 ints;
 
 	ints = readl(hsotg->regs + epint_reg);
@@ -1841,28 +1943,32 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 	dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
 		__func__, idx, dir_in ? "in" : "out", ints);
 
-	if (ints & S3C_DxEPINT_XferCompl) {
+	if (ints & DxEPINT_XferCompl) {
 		dev_dbg(hsotg->dev,
 			"%s: XferCompl: DxEPCTL=0x%08x, DxEPTSIZ=%08x\n",
 			__func__, readl(hsotg->regs + epctl_reg),
 			readl(hsotg->regs + epsiz_reg));
 
-		/* we get OutDone from the FIFO, so we only need to look
-		 * at completing IN requests here */
+		/*
+		 * we get OutDone from the FIFO, so we only need to look
+		 * at completing IN requests here
+		 */
 		if (dir_in) {
 			s3c_hsotg_complete_in(hsotg, hs_ep);
 
 			if (idx == 0 && !hs_ep->req)
 				s3c_hsotg_enqueue_setup(hsotg);
 		} else if (using_dma(hsotg)) {
-			/* We're using DMA, we need to fire an OutDone here
-			 * as we ignore the RXFIFO. */
+			/*
+			 * We're using DMA, we need to fire an OutDone here
+			 * as we ignore the RXFIFO.
+			 */
 
 			s3c_hsotg_handle_outdone(hsotg, idx, false);
 		}
 	}
 
-	if (ints & S3C_DxEPINT_EPDisbld) {
+	if (ints & DxEPINT_EPDisbld) {
 		dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
 
 		if (dir_in) {
@@ -1870,27 +1976,29 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 
 			s3c_hsotg_txfifo_flush(hsotg, idx);
 
-			if ((epctl & S3C_DxEPCTL_Stall) &&
-				(epctl & S3C_DxEPCTL_EPType_Bulk)) {
-				int dctl = readl(hsotg->regs + S3C_DCTL);
+			if ((epctl & DxEPCTL_Stall) &&
+				(epctl & DxEPCTL_EPType_Bulk)) {
+				int dctl = readl(hsotg->regs + DCTL);
 
-				dctl |= S3C_DCTL_CGNPInNAK;
-				writel(dctl, hsotg->regs + S3C_DCTL);
+				dctl |= DCTL_CGNPInNAK;
+				writel(dctl, hsotg->regs + DCTL);
 			}
 		}
 	}
 
-	if (ints & S3C_DxEPINT_AHBErr)
+	if (ints & DxEPINT_AHBErr)
 		dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
 
-	if (ints & S3C_DxEPINT_Setup) {  /* Setup or Timeout */
+	if (ints & DxEPINT_Setup) {  /* Setup or Timeout */
 		dev_dbg(hsotg->dev, "%s: Setup/Timeout\n",  __func__);
 
 		if (using_dma(hsotg) && idx == 0) {
-			/* this is the notification we've received a
+			/*
+			 * this is the notification we've received a
 			 * setup packet. In non-DMA mode we'd get this
 			 * from the RXFIFO, instead we need to process
-			 * the setup here. */
+			 * the setup here.
+			 */
 
 			if (dir_in)
 				WARN_ON_ONCE(1);
@@ -1899,26 +2007,25 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 		}
 	}
 
-	if (ints & S3C_DxEPINT_Back2BackSetup)
+	if (ints & DxEPINT_Back2BackSetup)
 		dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
 
 	if (dir_in) {
-		/* not sure if this is important, but we'll clear it anyway
-		 */
-		if (ints & S3C_DIEPMSK_INTknTXFEmpMsk) {
+		/* not sure if this is important, but we'll clear it anyway */
+		if (ints & DIEPMSK_INTknTXFEmpMsk) {
 			dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
 				__func__, idx);
 		}
 
 		/* this probably means something bad is happening */
-		if (ints & S3C_DIEPMSK_INTknEPMisMsk) {
+		if (ints & DIEPMSK_INTknEPMisMsk) {
 			dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
 				 __func__, idx);
 		}
 
 		/* FIFO has space or is empty (see GAHBCFG) */
 		if (hsotg->dedicated_fifos &&
-		    ints & S3C_DIEPMSK_TxFIFOEmpty) {
+		    ints & DIEPMSK_TxFIFOEmpty) {
 			dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
 				__func__, idx);
 			if (!using_dma(hsotg))
@@ -1933,40 +2040,45 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
  *
  * Handle updating the device settings after the enumeration phase has
  * been completed.
-*/
+ */
 static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
 {
-	u32 dsts = readl(hsotg->regs + S3C_DSTS);
+	u32 dsts = readl(hsotg->regs + DSTS);
 	int ep0_mps = 0, ep_mps;
 
-	/* This should signal the finish of the enumeration phase
+	/*
+	 * This should signal the finish of the enumeration phase
 	 * of the USB handshaking, so we should now know what rate
-	 * we connected at. */
+	 * we connected at.
+	 */
 
 	dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts);
 
-	/* note, since we're limited by the size of transfer on EP0, and
+	/*
+	 * note, since we're limited by the size of transfer on EP0, and
 	 * it seems IN transfers must be a even number of packets we do
-	 * not advertise a 64byte MPS on EP0. */
+	 * not advertise a 64byte MPS on EP0.
+	 */
 
 	/* catch both EnumSpd_FS and EnumSpd_FS48 */
-	switch (dsts & S3C_DSTS_EnumSpd_MASK) {
-	case S3C_DSTS_EnumSpd_FS:
-	case S3C_DSTS_EnumSpd_FS48:
+	switch (dsts & DSTS_EnumSpd_MASK) {
+	case DSTS_EnumSpd_FS:
+	case DSTS_EnumSpd_FS48:
 		hsotg->gadget.speed = USB_SPEED_FULL;
 		ep0_mps = EP0_MPS_LIMIT;
 		ep_mps = 64;
 		break;
 
-	case S3C_DSTS_EnumSpd_HS:
+	case DSTS_EnumSpd_HS:
 		hsotg->gadget.speed = USB_SPEED_HIGH;
 		ep0_mps = EP0_MPS_LIMIT;
 		ep_mps = 512;
 		break;
 
-	case S3C_DSTS_EnumSpd_LS:
+	case DSTS_EnumSpd_LS:
 		hsotg->gadget.speed = USB_SPEED_LOW;
-		/* note, we don't actually support LS in this driver at the
+		/*
+		 * note, we don't actually support LS in this driver at the
 		 * moment, and the documentation seems to imply that it isn't
 		 * supported by the PHYs on some of the devices.
 		 */
@@ -1975,13 +2087,15 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
 	dev_info(hsotg->dev, "new device is %s\n",
 		 usb_speed_string(hsotg->gadget.speed));
 
-	/* we should now know the maximum packet size for an
-	 * endpoint, so set the endpoints to a default value. */
+	/*
+	 * we should now know the maximum packet size for an
+	 * endpoint, so set the endpoints to a default value.
+	 */
 
 	if (ep0_mps) {
 		int i;
 		s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps);
-		for (i = 1; i < S3C_HSOTG_EPS; i++)
+		for (i = 1; i < hsotg->num_of_eps; i++)
 			s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps);
 	}
 
@@ -1990,8 +2104,8 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
 	s3c_hsotg_enqueue_setup(hsotg);
 
 	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-		readl(hsotg->regs + S3C_DIEPCTL0),
-		readl(hsotg->regs + S3C_DOEPCTL0));
+		readl(hsotg->regs + DIEPCTL0),
+		readl(hsotg->regs + DOEPCTL0));
 }
 
 /**
@@ -2014,8 +2128,10 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 	spin_lock_irqsave(&ep->lock, flags);
 
 	list_for_each_entry_safe(req, treq, &ep->queue, queue) {
-		/* currently, we can't do much about an already
-		 * running request on an in endpoint */
+		/*
+		 * currently, we can't do much about an already
+		 * running request on an in endpoint
+		 */
 
 		if (ep->req == req && ep->dir_in && !force)
 			continue;
@@ -2033,18 +2149,18 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 		(_hs)->driver->_entry(&(_hs)->gadget);
 
 /**
- * s3c_hsotg_disconnect_irq - disconnect irq service
+ * s3c_hsotg_disconnect - disconnect service
  * @hsotg: The device state.
  *
- * A disconnect IRQ has been received, meaning that the host has
- * lost contact with the bus. Remove all current transactions
- * and signal the gadget driver that this has happened.
-*/
-static void s3c_hsotg_disconnect_irq(struct s3c_hsotg *hsotg)
+ * The device has been disconnected. Remove all current
+ * transactions and signal the gadget driver that this
+ * has happened.
+ */
+static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg)
 {
 	unsigned ep;
 
-	for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
+	for (ep = 0; ep < hsotg->num_of_eps; ep++)
 		kill_all_requests(hsotg, &hsotg->eps[ep], -ESHUTDOWN, true);
 
 	call_gadget(hsotg, disconnect);
@@ -2062,7 +2178,7 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
 
 	/* look through for any more data to transmit */
 
-	for (epno = 0; epno < S3C_HSOTG_EPS; epno++) {
+	for (epno = 0; epno < hsotg->num_of_eps; epno++) {
 		ep = &hsotg->eps[epno];
 
 		if (!ep->dir_in)
@@ -2078,12 +2194,187 @@ static void s3c_hsotg_irq_fifoempty(struct s3c_hsotg *hsotg, bool periodic)
 	}
 }
 
-static struct s3c_hsotg *our_hsotg;
-
 /* IRQ flags which will trigger a retry around the IRQ loop */
-#define IRQ_RETRY_MASK (S3C_GINTSTS_NPTxFEmp | \
-			S3C_GINTSTS_PTxFEmp |  \
-			S3C_GINTSTS_RxFLvl)
+#define IRQ_RETRY_MASK (GINTSTS_NPTxFEmp | \
+			GINTSTS_PTxFEmp |  \
+			GINTSTS_RxFLvl)
+
+/**
+ * s3c_hsotg_corereset - issue softreset to the core
+ * @hsotg: The device state
+ *
+ * Issue a soft reset to the core, and await the core finishing it.
+ */
+static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
+{
+	int timeout;
+	u32 grstctl;
+
+	dev_dbg(hsotg->dev, "resetting core\n");
+
+	/* issue soft reset */
+	writel(GRSTCTL_CSftRst, hsotg->regs + GRSTCTL);
+
+	timeout = 1000;
+	do {
+		grstctl = readl(hsotg->regs + GRSTCTL);
+	} while ((grstctl & GRSTCTL_CSftRst) && timeout-- > 0);
+
+	if (grstctl & GRSTCTL_CSftRst) {
+		dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
+		return -EINVAL;
+	}
+
+	timeout = 1000;
+
+	while (1) {
+		u32 grstctl = readl(hsotg->regs + GRSTCTL);
+
+		if (timeout-- < 0) {
+			dev_info(hsotg->dev,
+				 "%s: reset failed, GRSTCTL=%08x\n",
+				 __func__, grstctl);
+			return -ETIMEDOUT;
+		}
+
+		if (!(grstctl & GRSTCTL_AHBIdle))
+			continue;
+
+		break;		/* reset done */
+	}
+
+	dev_dbg(hsotg->dev, "reset successful\n");
+	return 0;
+}
+
+/**
+ * s3c_hsotg_core_init - issue softreset to the core
+ * @hsotg: The device state
+ *
+ * Issue a soft reset to the core, and await the core finishing it.
+ */
+static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
+{
+	s3c_hsotg_corereset(hsotg);
+
+	/*
+	 * we must now enable ep0 ready for host detection and then
+	 * set configuration.
+	 */
+
+	/* set the PLL on, remove the HNP/SRP and set the PHY */
+	writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) |
+	       (0x5 << 10), hsotg->regs + GUSBCFG);
+
+	s3c_hsotg_init_fifo(hsotg);
+
+	__orr32(hsotg->regs + DCTL, DCTL_SftDiscon);
+
+	writel(1 << 18 | DCFG_DevSpd_HS,  hsotg->regs + DCFG);
+
+	/* Clear any pending OTG interrupts */
+	writel(0xffffffff, hsotg->regs + GOTGINT);
+
+	/* Clear any pending interrupts */
+	writel(0xffffffff, hsotg->regs + GINTSTS);
+
+	writel(GINTSTS_ErlySusp | GINTSTS_SessReqInt |
+	       GINTSTS_GOUTNakEff | GINTSTS_GINNakEff |
+	       GINTSTS_ConIDStsChng | GINTSTS_USBRst |
+	       GINTSTS_EnumDone | GINTSTS_OTGInt |
+	       GINTSTS_USBSusp | GINTSTS_WkUpInt,
+	       hsotg->regs + GINTMSK);
+
+	if (using_dma(hsotg))
+		writel(GAHBCFG_GlblIntrEn | GAHBCFG_DMAEn |
+		       GAHBCFG_HBstLen_Incr4,
+		       hsotg->regs + GAHBCFG);
+	else
+		writel(GAHBCFG_GlblIntrEn, hsotg->regs + GAHBCFG);
+
+	/*
+	 * Enabling INTknTXFEmpMsk here seems to be a big mistake, we end
+	 * up being flooded with interrupts if the host is polling the
+	 * endpoint to try and read data.
+	 */
+
+	writel(((hsotg->dedicated_fifos) ? DIEPMSK_TxFIFOEmpty : 0) |
+	       DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk |
+	       DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk |
+	       DIEPMSK_INTknEPMisMsk,
+	       hsotg->regs + DIEPMSK);
+
+	/*
+	 * don't need XferCompl, we get that from RXFIFO in slave mode. In
+	 * DMA mode we may need this.
+	 */
+	writel((using_dma(hsotg) ? (DIEPMSK_XferComplMsk |
+				    DIEPMSK_TimeOUTMsk) : 0) |
+	       DOEPMSK_EPDisbldMsk | DOEPMSK_AHBErrMsk |
+	       DOEPMSK_SetupMsk,
+	       hsotg->regs + DOEPMSK);
+
+	writel(0, hsotg->regs + DAINTMSK);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		readl(hsotg->regs + DIEPCTL0),
+		readl(hsotg->regs + DOEPCTL0));
+
+	/* enable in and out endpoint interrupts */
+	s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPInt | GINTSTS_IEPInt);
+
+	/*
+	 * Enable the RXFIFO when in slave mode, as this is how we collect
+	 * the data. In DMA mode, we get events from the FIFO but also
+	 * things we cannot process, so do not use it.
+	 */
+	if (!using_dma(hsotg))
+		s3c_hsotg_en_gsint(hsotg, GINTSTS_RxFLvl);
+
+	/* Enable interrupts for EP0 in and out */
+	s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1);
+	s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1);
+
+	__orr32(hsotg->regs + DCTL, DCTL_PWROnPrgDone);
+	udelay(10);  /* see openiboot */
+	__bic32(hsotg->regs + DCTL, DCTL_PWROnPrgDone);
+
+	dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL));
+
+	/*
+	 * DxEPCTL_USBActEp says RO in manual, but seems to be set by
+	 * writing to the EPCTL register..
+	 */
+
+	/* set to read 1 8byte packet */
+	writel(DxEPTSIZ_MC(1) | DxEPTSIZ_PktCnt(1) |
+	       DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0);
+
+	writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
+	       DxEPCTL_CNAK | DxEPCTL_EPEna |
+	       DxEPCTL_USBActEp,
+	       hsotg->regs + DOEPCTL0);
+
+	/* enable, but don't activate EP0in */
+	writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
+	       DxEPCTL_USBActEp, hsotg->regs + DIEPCTL0);
+
+	s3c_hsotg_enqueue_setup(hsotg);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		readl(hsotg->regs + DIEPCTL0),
+		readl(hsotg->regs + DOEPCTL0));
+
+	/* clear global NAKs */
+	writel(DCTL_CGOUTNak | DCTL_CGNPInNAK,
+	       hsotg->regs + DCTL);
+
+	/* must be at-least 3ms to allow bus to see disconnect */
+	mdelay(3);
+
+	/* remove the soft-disconnect and let's go */
+	__bic32(hsotg->regs + DCTL, DCTL_SftDiscon);
+}
 
 /**
  * s3c_hsotg_irq - handle device interrupt
@@ -2098,52 +2389,45 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
 	u32 gintmsk;
 
 irq_retry:
-	gintsts = readl(hsotg->regs + S3C_GINTSTS);
-	gintmsk = readl(hsotg->regs + S3C_GINTMSK);
+	gintsts = readl(hsotg->regs + GINTSTS);
+	gintmsk = readl(hsotg->regs + GINTMSK);
 
 	dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
 		__func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
 
 	gintsts &= gintmsk;
 
-	if (gintsts & S3C_GINTSTS_OTGInt) {
-		u32 otgint = readl(hsotg->regs + S3C_GOTGINT);
+	if (gintsts & GINTSTS_OTGInt) {
+		u32 otgint = readl(hsotg->regs + GOTGINT);
 
 		dev_info(hsotg->dev, "OTGInt: %08x\n", otgint);
 
-		writel(otgint, hsotg->regs + S3C_GOTGINT);
-	}
-
-	if (gintsts & S3C_GINTSTS_DisconnInt) {
-		dev_dbg(hsotg->dev, "%s: DisconnInt\n", __func__);
-		writel(S3C_GINTSTS_DisconnInt, hsotg->regs + S3C_GINTSTS);
-
-		s3c_hsotg_disconnect_irq(hsotg);
+		writel(otgint, hsotg->regs + GOTGINT);
 	}
 
-	if (gintsts & S3C_GINTSTS_SessReqInt) {
+	if (gintsts & GINTSTS_SessReqInt) {
 		dev_dbg(hsotg->dev, "%s: SessReqInt\n", __func__);
-		writel(S3C_GINTSTS_SessReqInt, hsotg->regs + S3C_GINTSTS);
+		writel(GINTSTS_SessReqInt, hsotg->regs + GINTSTS);
 	}
 
-	if (gintsts & S3C_GINTSTS_EnumDone) {
-		writel(S3C_GINTSTS_EnumDone, hsotg->regs + S3C_GINTSTS);
+	if (gintsts & GINTSTS_EnumDone) {
+		writel(GINTSTS_EnumDone, hsotg->regs + GINTSTS);
 
 		s3c_hsotg_irq_enumdone(hsotg);
 	}
 
-	if (gintsts & S3C_GINTSTS_ConIDStsChng) {
+	if (gintsts & GINTSTS_ConIDStsChng) {
 		dev_dbg(hsotg->dev, "ConIDStsChg (DSTS=0x%08x, GOTCTL=%08x)\n",
-			readl(hsotg->regs + S3C_DSTS),
-			readl(hsotg->regs + S3C_GOTGCTL));
+			readl(hsotg->regs + DSTS),
+			readl(hsotg->regs + GOTGCTL));
 
-		writel(S3C_GINTSTS_ConIDStsChng, hsotg->regs + S3C_GINTSTS);
+		writel(GINTSTS_ConIDStsChng, hsotg->regs + GINTSTS);
 	}
 
-	if (gintsts & (S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt)) {
-		u32 daint = readl(hsotg->regs + S3C_DAINT);
-		u32 daint_out = daint >> S3C_DAINT_OutEP_SHIFT;
-		u32 daint_in = daint & ~(daint_out << S3C_DAINT_OutEP_SHIFT);
+	if (gintsts & (GINTSTS_OEPInt | GINTSTS_IEPInt)) {
+		u32 daint = readl(hsotg->regs + DAINT);
+		u32 daint_out = daint >> DAINT_OutEP_SHIFT;
+		u32 daint_in = daint & ~(daint_out << DAINT_OutEP_SHIFT);
 		int ep;
 
 		dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
@@ -2159,102 +2443,116 @@ irq_retry:
 		}
 	}
 
-	if (gintsts & S3C_GINTSTS_USBRst) {
+	if (gintsts & GINTSTS_USBRst) {
+
+		u32 usb_status = readl(hsotg->regs + GOTGCTL);
+
 		dev_info(hsotg->dev, "%s: USBRst\n", __func__);
 		dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
-			readl(hsotg->regs + S3C_GNPTXSTS));
+			readl(hsotg->regs + GNPTXSTS));
 
-		writel(S3C_GINTSTS_USBRst, hsotg->regs + S3C_GINTSTS);
+		writel(GINTSTS_USBRst, hsotg->regs + GINTSTS);
 
-		kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true);
+		if (usb_status & GOTGCTL_BSESVLD) {
+			if (time_after(jiffies, hsotg->last_rst +
+				       msecs_to_jiffies(200))) {
 
-		/* it seems after a reset we can end up with a situation
-		 * where the TXFIFO still has data in it... the docs
-		 * suggest resetting all the fifos, so use the init_fifo
-		 * code to relayout and flush the fifos.
-		 */
+				kill_all_requests(hsotg, &hsotg->eps[0],
+							  -ECONNRESET, true);
 
-		s3c_hsotg_init_fifo(hsotg);
-
-		s3c_hsotg_enqueue_setup(hsotg);
+				s3c_hsotg_core_init(hsotg);
+				hsotg->last_rst = jiffies;
+			}
+		}
 	}
 
 	/* check both FIFOs */
 
-	if (gintsts & S3C_GINTSTS_NPTxFEmp) {
+	if (gintsts & GINTSTS_NPTxFEmp) {
 		dev_dbg(hsotg->dev, "NPTxFEmp\n");
 
-		/* Disable the interrupt to stop it happening again
+		/*
+		 * Disable the interrupt to stop it happening again
 		 * unless one of these endpoint routines decides that
-		 * it needs re-enabling */
+		 * it needs re-enabling
+		 */
 
-		s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_NPTxFEmp);
+		s3c_hsotg_disable_gsint(hsotg, GINTSTS_NPTxFEmp);
 		s3c_hsotg_irq_fifoempty(hsotg, false);
 	}
 
-	if (gintsts & S3C_GINTSTS_PTxFEmp) {
+	if (gintsts & GINTSTS_PTxFEmp) {
 		dev_dbg(hsotg->dev, "PTxFEmp\n");
 
-		/* See note in S3C_GINTSTS_NPTxFEmp */
+		/* See note in GINTSTS_NPTxFEmp */
 
-		s3c_hsotg_disable_gsint(hsotg, S3C_GINTSTS_PTxFEmp);
+		s3c_hsotg_disable_gsint(hsotg, GINTSTS_PTxFEmp);
 		s3c_hsotg_irq_fifoempty(hsotg, true);
 	}
 
-	if (gintsts & S3C_GINTSTS_RxFLvl) {
-		/* note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
+	if (gintsts & GINTSTS_RxFLvl) {
+		/*
+		 * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
 		 * we need to retry s3c_hsotg_handle_rx if this is still
-		 * set. */
+		 * set.
+		 */
 
 		s3c_hsotg_handle_rx(hsotg);
 	}
 
-	if (gintsts & S3C_GINTSTS_ModeMis) {
+	if (gintsts & GINTSTS_ModeMis) {
 		dev_warn(hsotg->dev, "warning, mode mismatch triggered\n");
-		writel(S3C_GINTSTS_ModeMis, hsotg->regs + S3C_GINTSTS);
+		writel(GINTSTS_ModeMis, hsotg->regs + GINTSTS);
 	}
 
-	if (gintsts & S3C_GINTSTS_USBSusp) {
-		dev_info(hsotg->dev, "S3C_GINTSTS_USBSusp\n");
-		writel(S3C_GINTSTS_USBSusp, hsotg->regs + S3C_GINTSTS);
+	if (gintsts & GINTSTS_USBSusp) {
+		dev_info(hsotg->dev, "GINTSTS_USBSusp\n");
+		writel(GINTSTS_USBSusp, hsotg->regs + GINTSTS);
 
 		call_gadget(hsotg, suspend);
+		s3c_hsotg_disconnect(hsotg);
 	}
 
-	if (gintsts & S3C_GINTSTS_WkUpInt) {
-		dev_info(hsotg->dev, "S3C_GINTSTS_WkUpIn\n");
-		writel(S3C_GINTSTS_WkUpInt, hsotg->regs + S3C_GINTSTS);
+	if (gintsts & GINTSTS_WkUpInt) {
+		dev_info(hsotg->dev, "GINTSTS_WkUpIn\n");
+		writel(GINTSTS_WkUpInt, hsotg->regs + GINTSTS);
 
 		call_gadget(hsotg, resume);
 	}
 
-	if (gintsts & S3C_GINTSTS_ErlySusp) {
-		dev_dbg(hsotg->dev, "S3C_GINTSTS_ErlySusp\n");
-		writel(S3C_GINTSTS_ErlySusp, hsotg->regs + S3C_GINTSTS);
+	if (gintsts & GINTSTS_ErlySusp) {
+		dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n");
+		writel(GINTSTS_ErlySusp, hsotg->regs + GINTSTS);
+
+		s3c_hsotg_disconnect(hsotg);
 	}
 
-	/* these next two seem to crop-up occasionally causing the core
+	/*
+	 * these next two seem to crop-up occasionally causing the core
 	 * to shutdown the USB transfer, so try clearing them and logging
-	 * the occurrence. */
+	 * the occurrence.
+	 */
 
-	if (gintsts & S3C_GINTSTS_GOUTNakEff) {
+	if (gintsts & GINTSTS_GOUTNakEff) {
 		dev_info(hsotg->dev, "GOUTNakEff triggered\n");
 
-		writel(S3C_DCTL_CGOUTNak, hsotg->regs + S3C_DCTL);
+		writel(DCTL_CGOUTNak, hsotg->regs + DCTL);
 
 		s3c_hsotg_dump(hsotg);
 	}
 
-	if (gintsts & S3C_GINTSTS_GINNakEff) {
+	if (gintsts & GINTSTS_GINNakEff) {
 		dev_info(hsotg->dev, "GINNakEff triggered\n");
 
-		writel(S3C_DCTL_CGNPInNAK, hsotg->regs + S3C_DCTL);
+		writel(DCTL_CGNPInNAK, hsotg->regs + DCTL);
 
 		s3c_hsotg_dump(hsotg);
 	}
 
-	/* if we've had fifo events, we should try and go around the
-	 * loop again to see if there's any point in returning yet. */
+	/*
+	 * if we've had fifo events, we should try and go around the
+	 * loop again to see if there's any point in returning yet.
+	 */
 
 	if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
 			goto irq_retry;
@@ -2268,7 +2566,7 @@ irq_retry:
  * @desc: The USB endpoint descriptor to configure with.
  *
  * This is called from the USB gadget code's usb_ep_enable().
-*/
+ */
 static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 			       const struct usb_endpoint_descriptor *desc)
 {
@@ -2300,7 +2598,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 
 	/* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */
 
-	epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
 	epctrl = readl(hsotg->regs + epctrl_reg);
 
 	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
@@ -2308,20 +2606,23 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 
 	spin_lock_irqsave(&hs_ep->lock, flags);
 
-	epctrl &= ~(S3C_DxEPCTL_EPType_MASK | S3C_DxEPCTL_MPS_MASK);
-	epctrl |= S3C_DxEPCTL_MPS(mps);
+	epctrl &= ~(DxEPCTL_EPType_MASK | DxEPCTL_MPS_MASK);
+	epctrl |= DxEPCTL_MPS(mps);
 
-	/* mark the endpoint as active, otherwise the core may ignore
-	 * transactions entirely for this endpoint */
-	epctrl |= S3C_DxEPCTL_USBActEp;
+	/*
+	 * mark the endpoint as active, otherwise the core may ignore
+	 * transactions entirely for this endpoint
+	 */
+	epctrl |= DxEPCTL_USBActEp;
 
-	/* set the NAK status on the endpoint, otherwise we might try and
+	/*
+	 * set the NAK status on the endpoint, otherwise we might try and
 	 * do something with data that we've yet got a request to process
 	 * since the RXFIFO will take data for an endpoint even if the
 	 * size register hasn't been set.
 	 */
 
-	epctrl |= S3C_DxEPCTL_SNAK;
+	epctrl |= DxEPCTL_SNAK;
 
 	/* update the endpoint state */
 	hs_ep->ep.maxpacket = mps;
@@ -2336,37 +2637,40 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 		goto out;
 
 	case USB_ENDPOINT_XFER_BULK:
-		epctrl |= S3C_DxEPCTL_EPType_Bulk;
+		epctrl |= DxEPCTL_EPType_Bulk;
 		break;
 
 	case USB_ENDPOINT_XFER_INT:
 		if (dir_in) {
-			/* Allocate our TxFNum by simply using the index
+			/*
+			 * Allocate our TxFNum by simply using the index
 			 * of the endpoint for the moment. We could do
 			 * something better if the host indicates how
-			 * many FIFOs we are expecting to use. */
+			 * many FIFOs we are expecting to use.
+			 */
 
 			hs_ep->periodic = 1;
-			epctrl |= S3C_DxEPCTL_TxFNum(index);
+			epctrl |= DxEPCTL_TxFNum(index);
 		}
 
-		epctrl |= S3C_DxEPCTL_EPType_Intterupt;
+		epctrl |= DxEPCTL_EPType_Intterupt;
 		break;
 
 	case USB_ENDPOINT_XFER_CONTROL:
-		epctrl |= S3C_DxEPCTL_EPType_Control;
+		epctrl |= DxEPCTL_EPType_Control;
 		break;
 	}
 
-	/* if the hardware has dedicated fifos, we must give each IN EP
+	/*
+	 * if the hardware has dedicated fifos, we must give each IN EP
 	 * a unique tx-fifo even if it is non-periodic.
 	 */
 	if (dir_in && hsotg->dedicated_fifos)
-		epctrl |= S3C_DxEPCTL_TxFNum(index);
+		epctrl |= DxEPCTL_TxFNum(index);
 
 	/* for non control endpoints, set PID to D0 */
 	if (index)
-		epctrl |= S3C_DxEPCTL_SetD0PID;
+		epctrl |= DxEPCTL_SetD0PID;
 
 	dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
 		__func__, epctrl);
@@ -2383,6 +2687,10 @@ out:
 	return ret;
 }
 
+/**
+ * s3c_hsotg_ep_disable - disable given endpoint
+ * @ep: The endpoint to disable.
+ */
 static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 {
 	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
@@ -2400,7 +2708,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 		return -EINVAL;
 	}
 
-	epctrl_reg = dir_in ? S3C_DIEPCTL(index) : S3C_DOEPCTL(index);
+	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
 
 	/* terminate all requests with shutdown */
 	kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
@@ -2408,9 +2716,9 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 	spin_lock_irqsave(&hs_ep->lock, flags);
 
 	ctrl = readl(hsotg->regs + epctrl_reg);
-	ctrl &= ~S3C_DxEPCTL_EPEna;
-	ctrl &= ~S3C_DxEPCTL_USBActEp;
-	ctrl |= S3C_DxEPCTL_SNAK;
+	ctrl &= ~DxEPCTL_EPEna;
+	ctrl &= ~DxEPCTL_USBActEp;
+	ctrl |= DxEPCTL_SNAK;
 
 	dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
 	writel(ctrl, hsotg->regs + epctrl_reg);
@@ -2426,7 +2734,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
  * on_list - check request is on the given endpoint
  * @ep: The endpoint to check.
  * @test: The request to test if it is on the endpoint.
-*/
+ */
 static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test)
 {
 	struct s3c_hsotg_req *req, *treq;
@@ -2439,6 +2747,11 @@ static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test)
 	return false;
 }
 
+/**
+ * s3c_hsotg_ep_dequeue - dequeue given endpoint
+ * @ep: The endpoint to dequeue.
+ * @req: The request to be removed from a queue.
+ */
 static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 {
 	struct s3c_hsotg_req *hs_req = our_req(req);
@@ -2461,6 +2774,11 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 	return 0;
 }
 
+/**
+ * s3c_hsotg_ep_sethalt - set halt on a given endpoint
+ * @ep: The endpoint to set halt.
+ * @value: Set or unset the halt.
+ */
 static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 {
 	struct s3c_hsotg_ep *hs_ep = our_ep(ep);
@@ -2477,34 +2795,34 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value)
 
 	/* write both IN and OUT control registers */
 
-	epreg = S3C_DIEPCTL(index);
+	epreg = DIEPCTL(index);
 	epctl = readl(hs->regs + epreg);
 
 	if (value) {
-		epctl |= S3C_DxEPCTL_Stall + S3C_DxEPCTL_SNAK;
-		if (epctl & S3C_DxEPCTL_EPEna)
-			epctl |= S3C_DxEPCTL_EPDis;
+		epctl |= DxEPCTL_Stall + DxEPCTL_SNAK;
+		if (epctl & DxEPCTL_EPEna)
+			epctl |= DxEPCTL_EPDis;
 	} else {
-		epctl &= ~S3C_DxEPCTL_Stall;
-		xfertype = epctl & S3C_DxEPCTL_EPType_MASK;
-		if (xfertype == S3C_DxEPCTL_EPType_Bulk ||
-			xfertype == S3C_DxEPCTL_EPType_Intterupt)
-				epctl |= S3C_DxEPCTL_SetD0PID;
+		epctl &= ~DxEPCTL_Stall;
+		xfertype = epctl & DxEPCTL_EPType_MASK;
+		if (xfertype == DxEPCTL_EPType_Bulk ||
+			xfertype == DxEPCTL_EPType_Intterupt)
+				epctl |= DxEPCTL_SetD0PID;
 	}
 
 	writel(epctl, hs->regs + epreg);
 
-	epreg = S3C_DOEPCTL(index);
+	epreg = DOEPCTL(index);
 	epctl = readl(hs->regs + epreg);
 
 	if (value)
-		epctl |= S3C_DxEPCTL_Stall;
+		epctl |= DxEPCTL_Stall;
 	else {
-		epctl &= ~S3C_DxEPCTL_Stall;
-		xfertype = epctl & S3C_DxEPCTL_EPType_MASK;
-		if (xfertype == S3C_DxEPCTL_EPType_Bulk ||
-			xfertype == S3C_DxEPCTL_EPType_Intterupt)
-				epctl |= S3C_DxEPCTL_SetD0PID;
+		epctl &= ~DxEPCTL_Stall;
+		xfertype = epctl & DxEPCTL_EPType_MASK;
+		if (xfertype == DxEPCTL_EPType_Bulk ||
+			xfertype == DxEPCTL_EPType_Intterupt)
+				epctl |= DxEPCTL_SetD0PID;
 	}
 
 	writel(epctl, hs->regs + epreg);
@@ -2526,57 +2844,91 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = {
 };
 
 /**
- * s3c_hsotg_corereset - issue softreset to the core
- * @hsotg: The device state
+ * s3c_hsotg_phy_enable - enable platform phy dev
+ * @hsotg: The driver state
  *
- * Issue a soft reset to the core, and await the core finishing it.
-*/
-static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
+ * A wrapper for platform code responsible for controlling
+ * low-level USB code
+ */
+static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
 {
-	int timeout;
-	u32 grstctl;
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
 
-	dev_dbg(hsotg->dev, "resetting core\n");
+	dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
+	if (hsotg->plat->phy_init)
+		hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
+}
 
-	/* issue soft reset */
-	writel(S3C_GRSTCTL_CSftRst, hsotg->regs + S3C_GRSTCTL);
+/**
+ * s3c_hsotg_phy_disable - disable platform phy dev
+ * @hsotg: The driver state
+ *
+ * A wrapper for platform code responsible for controlling
+ * low-level USB code
+ */
+static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
+{
+	struct platform_device *pdev = to_platform_device(hsotg->dev);
 
-	timeout = 1000;
-	do {
-		grstctl = readl(hsotg->regs + S3C_GRSTCTL);
-	} while ((grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0);
+	if (hsotg->plat->phy_exit)
+		hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
+}
 
-	if (grstctl & S3C_GRSTCTL_CSftRst) {
-		dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
-		return -EINVAL;
-	}
+/**
+ * s3c_hsotg_init - initalize the usb core
+ * @hsotg: The driver state
+ */
+static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
+{
+	/* unmask subset of endpoint interrupts */
 
-	timeout = 1000;
+	writel(DIEPMSK_TimeOUTMsk | DIEPMSK_AHBErrMsk |
+	       DIEPMSK_EPDisbldMsk | DIEPMSK_XferComplMsk,
+	       hsotg->regs + DIEPMSK);
 
-	while (1) {
-		u32 grstctl = readl(hsotg->regs + S3C_GRSTCTL);
+	writel(DOEPMSK_SetupMsk | DOEPMSK_AHBErrMsk |
+	       DOEPMSK_EPDisbldMsk | DOEPMSK_XferComplMsk,
+	       hsotg->regs + DOEPMSK);
 
-		if (timeout-- < 0) {
-			dev_info(hsotg->dev,
-				 "%s: reset failed, GRSTCTL=%08x\n",
-				 __func__, grstctl);
-			return -ETIMEDOUT;
-		}
+	writel(0, hsotg->regs + DAINTMSK);
 
-		if (!(grstctl & S3C_GRSTCTL_AHBIdle))
-			continue;
+	/* Be in disconnected state until gadget is registered */
+	__orr32(hsotg->regs + DCTL, DCTL_SftDiscon);
 
-		break;		/* reset done */
+	if (0) {
+		/* post global nak until we're ready */
+		writel(DCTL_SGNPInNAK | DCTL_SGOUTNak,
+		       hsotg->regs + DCTL);
 	}
 
-	dev_dbg(hsotg->dev, "reset successful\n");
-	return 0;
+	/* setup fifos */
+
+	dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+		readl(hsotg->regs + GRXFSIZ),
+		readl(hsotg->regs + GNPTXFSIZ));
+
+	s3c_hsotg_init_fifo(hsotg);
+
+	/* set the PLL on, remove the HNP/SRP and set the PHY */
+	writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) | (0x5 << 10),
+	       hsotg->regs + GUSBCFG);
+
+	writel(using_dma(hsotg) ? GAHBCFG_DMAEn : 0x0,
+	       hsotg->regs + GAHBCFG);
 }
 
-static int s3c_hsotg_start(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+/**
+ * s3c_hsotg_udc_start - prepare the udc for work
+ * @gadget: The usb gadget state
+ * @driver: The usb gadget driver
+ *
+ * Perform initialization to prepare udc device and driver
+ * to work.
+ */
+static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
+			   struct usb_gadget_driver *driver)
 {
-	struct s3c_hsotg *hsotg = our_hsotg;
+	struct s3c_hsotg *hsotg = to_hsotg(gadget);
 	int ret;
 
 	if (!hsotg) {
@@ -2592,7 +2944,7 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver,
 	if (driver->max_speed < USB_SPEED_FULL)
 		dev_err(hsotg->dev, "%s: bad speed\n", __func__);
 
-	if (!bind || !driver->setup) {
+	if (!driver->setup) {
 		dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
 		return -EINVAL;
 	}
@@ -2605,135 +2957,17 @@ static int s3c_hsotg_start(struct usb_gadget_driver *driver,
 	hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask;
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
 
-	ret = device_add(&hsotg->gadget.dev);
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
+				    hsotg->supplies);
 	if (ret) {
-		dev_err(hsotg->dev, "failed to register gadget device\n");
+		dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret);
 		goto err;
 	}
 
-	ret = bind(&hsotg->gadget);
-	if (ret) {
-		dev_err(hsotg->dev, "failed bind %s\n", driver->driver.name);
-
-		hsotg->gadget.dev.driver = NULL;
-		hsotg->driver = NULL;
-		goto err;
-	}
-
-	/* we must now enable ep0 ready for host detection and then
-	 * set configuration. */
-
-	s3c_hsotg_corereset(hsotg);
-
-	/* set the PLL on, remove the HNP/SRP and set the PHY */
-	writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) |
-	       (0x5 << 10), hsotg->regs + S3C_GUSBCFG);
-
-	/* looks like soft-reset changes state of FIFOs */
-	s3c_hsotg_init_fifo(hsotg);
-
-	__orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
-
-	writel(1 << 18 | S3C_DCFG_DevSpd_HS,  hsotg->regs + S3C_DCFG);
-
-	/* Clear any pending OTG interrupts */
-	writel(0xffffffff, hsotg->regs + S3C_GOTGINT);
-
-	/* Clear any pending interrupts */
-	writel(0xffffffff, hsotg->regs + S3C_GINTSTS);
-
-	writel(S3C_GINTSTS_DisconnInt | S3C_GINTSTS_SessReqInt |
-	       S3C_GINTSTS_ConIDStsChng | S3C_GINTSTS_USBRst |
-	       S3C_GINTSTS_EnumDone | S3C_GINTSTS_OTGInt |
-	       S3C_GINTSTS_USBSusp | S3C_GINTSTS_WkUpInt |
-	       S3C_GINTSTS_GOUTNakEff | S3C_GINTSTS_GINNakEff |
-	       S3C_GINTSTS_ErlySusp,
-	       hsotg->regs + S3C_GINTMSK);
-
-	if (using_dma(hsotg))
-		writel(S3C_GAHBCFG_GlblIntrEn | S3C_GAHBCFG_DMAEn |
-		       S3C_GAHBCFG_HBstLen_Incr4,
-		       hsotg->regs + S3C_GAHBCFG);
-	else
-		writel(S3C_GAHBCFG_GlblIntrEn, hsotg->regs + S3C_GAHBCFG);
-
-	/* Enabling INTknTXFEmpMsk here seems to be a big mistake, we end
-	 * up being flooded with interrupts if the host is polling the
-	 * endpoint to try and read data. */
-
-	writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
-	       S3C_DIEPMSK_INTknEPMisMsk |
-	       S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk |
-	       ((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0),
-	       hsotg->regs + S3C_DIEPMSK);
-
-	/* don't need XferCompl, we get that from RXFIFO in slave mode. In
-	 * DMA mode we may need this. */
-	writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
-	       S3C_DOEPMSK_EPDisbldMsk |
-	       (using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk |
-				   S3C_DIEPMSK_TimeOUTMsk) : 0),
-	       hsotg->regs + S3C_DOEPMSK);
-
-	writel(0, hsotg->regs + S3C_DAINTMSK);
-
-	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-		readl(hsotg->regs + S3C_DIEPCTL0),
-		readl(hsotg->regs + S3C_DOEPCTL0));
-
-	/* enable in and out endpoint interrupts */
-	s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
-
-	/* Enable the RXFIFO when in slave mode, as this is how we collect
-	 * the data. In DMA mode, we get events from the FIFO but also
-	 * things we cannot process, so do not use it. */
-	if (!using_dma(hsotg))
-		s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_RxFLvl);
-
-	/* Enable interrupts for EP0 in and out */
-	s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1);
-	s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1);
-
-	__orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
-	udelay(10);  /* see openiboot */
-	__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
-
-	dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
-
-	/* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
-	   writing to the EPCTL register.. */
-
-	/* set to read 1 8byte packet */
-	writel(S3C_DxEPTSIZ_MC(1) | S3C_DxEPTSIZ_PktCnt(1) |
-	       S3C_DxEPTSIZ_XferSize(8), hsotg->regs + DOEPTSIZ0);
-
-	writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
-	       S3C_DxEPCTL_CNAK | S3C_DxEPCTL_EPEna |
-	       S3C_DxEPCTL_USBActEp,
-	       hsotg->regs + S3C_DOEPCTL0);
-
-	/* enable, but don't activate EP0in */
-	writel(s3c_hsotg_ep0_mps(hsotg->eps[0].ep.maxpacket) |
-	       S3C_DxEPCTL_USBActEp, hsotg->regs + S3C_DIEPCTL0);
-
-	s3c_hsotg_enqueue_setup(hsotg);
-
-	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-		readl(hsotg->regs + S3C_DIEPCTL0),
-		readl(hsotg->regs + S3C_DOEPCTL0));
-
-	/* clear global NAKs */
-	writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
-	       hsotg->regs + S3C_DCTL);
-
-	/* must be at-least 3ms to allow bus to see disconnect */
-	msleep(3);
-
-	/* remove the soft-disconnect and let's go */
-	__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
-
-	/* report to the user, and return */
+	s3c_hsotg_phy_enable(hsotg);
 
+	s3c_hsotg_core_init(hsotg);
+	hsotg->last_rst = jiffies;
 	dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
 	return 0;
 
@@ -2743,9 +2977,17 @@ err:
 	return ret;
 }
 
-static int s3c_hsotg_stop(struct usb_gadget_driver *driver)
+/**
+ * s3c_hsotg_udc_stop - stop the udc
+ * @gadget: The usb gadget state
+ * @driver: The usb gadget driver
+ *
+ * Stop udc hw block and stay tunned for future transmissions
+ */
+static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
+			  struct usb_gadget_driver *driver)
 {
-	struct s3c_hsotg *hsotg = our_hsotg;
+	struct s3c_hsotg *hsotg = to_hsotg(gadget);
 	int ep;
 
 	if (!hsotg)
@@ -2755,16 +2997,15 @@ static int s3c_hsotg_stop(struct usb_gadget_driver *driver)
 		return -EINVAL;
 
 	/* all endpoints should be shutdown */
-	for (ep = 0; ep < S3C_HSOTG_EPS; ep++)
+	for (ep = 0; ep < hsotg->num_of_eps; ep++)
 		s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
 
-	call_gadget(hsotg, disconnect);
+	s3c_hsotg_phy_disable(hsotg);
+	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
 
-	driver->unbind(&hsotg->gadget);
 	hsotg->driver = NULL;
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
-
-	device_del(&hsotg->gadget.dev);
+	hsotg->gadget.dev.driver = NULL;
 
 	dev_info(hsotg->dev, "unregistered gadget driver '%s'\n",
 		 driver->driver.name);
@@ -2772,6 +3013,12 @@ static int s3c_hsotg_stop(struct usb_gadget_driver *driver)
 	return 0;
 }
 
+/**
+ * s3c_hsotg_gadget_getframe - read the frame number
+ * @gadget: The usb gadget state
+ *
+ * Read the {micro} frame number
+ */
 static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
 {
 	return s3c_hsotg_read_frameno(to_hsotg(gadget));
@@ -2779,8 +3026,8 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
 
 static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
 	.get_frame	= s3c_hsotg_gadget_getframe,
-	.start		= s3c_hsotg_start,
-	.stop		= s3c_hsotg_stop,
+	.udc_start		= s3c_hsotg_udc_start,
+	.udc_stop		= s3c_hsotg_udc_stop,
 };
 
 /**
@@ -2827,111 +3074,42 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg,
 	hs_ep->ep.maxpacket = epnum ? 512 : EP0_MPS_LIMIT;
 	hs_ep->ep.ops = &s3c_hsotg_ep_ops;
 
-	/* Read the FIFO size for the Periodic TX FIFO, even if we're
+	/*
+	 * Read the FIFO size for the Periodic TX FIFO, even if we're
 	 * an OUT endpoint, we may as well do this if in future the
 	 * code is changed to make each endpoint's direction changeable.
 	 */
 
-	ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum));
-	hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4;
+	ptxfifo = readl(hsotg->regs + DPTXFSIZn(epnum));
+	hs_ep->fifo_size = DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4;
 
-	/* if we're using dma, we need to set the next-endpoint pointer
+	/*
+	 * if we're using dma, we need to set the next-endpoint pointer
 	 * to be something valid.
 	 */
 
 	if (using_dma(hsotg)) {
-		u32 next = S3C_DxEPCTL_NextEp((epnum + 1) % 15);
-		writel(next, hsotg->regs + S3C_DIEPCTL(epnum));
-		writel(next, hsotg->regs + S3C_DOEPCTL(epnum));
+		u32 next = DxEPCTL_NextEp((epnum + 1) % 15);
+		writel(next, hsotg->regs + DIEPCTL(epnum));
+		writel(next, hsotg->regs + DOEPCTL(epnum));
 	}
 }
 
 /**
- * s3c_hsotg_otgreset - reset the OtG phy block
- * @hsotg: The host state.
+ * s3c_hsotg_hw_cfg - read HW configuration registers
+ * @param: The device state
  *
- * Power up the phy, set the basic configuration and start the PHY.
+ * Read the USB core HW configuration registers
  */
-static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg)
-{
-	struct clk *xusbxti;
-	u32 pwr, osc;
-
-	pwr = readl(S3C_PHYPWR);
-	pwr &= ~0x19;
-	writel(pwr, S3C_PHYPWR);
-	mdelay(1);
-
-	osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0;
-
-	xusbxti = clk_get(hsotg->dev, "xusbxti");
-	if (xusbxti && !IS_ERR(xusbxti)) {
-		switch (clk_get_rate(xusbxti)) {
-		case 12*MHZ:
-			osc |= S3C_PHYCLK_CLKSEL_12M;
-			break;
-		case 24*MHZ:
-			osc |= S3C_PHYCLK_CLKSEL_24M;
-			break;
-		default:
-		case 48*MHZ:
-			/* default reference clock */
-			break;
-		}
-		clk_put(xusbxti);
-	}
-
-	writel(osc | 0x10, S3C_PHYCLK);
-
-	/* issue a full set of resets to the otg and core */
-
-	writel(S3C_RSTCON_PHY, S3C_RSTCON);
-	udelay(20);	/* at-least 10uS */
-	writel(0, S3C_RSTCON);
-}
-
-
-static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
+static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg)
 {
-	u32 cfg4;
-
-	/* unmask subset of endpoint interrupts */
-
-	writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk |
-	       S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk,
-	       hsotg->regs + S3C_DIEPMSK);
-
-	writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
-	       S3C_DOEPMSK_EPDisbldMsk | S3C_DOEPMSK_XferComplMsk,
-	       hsotg->regs + S3C_DOEPMSK);
-
-	writel(0, hsotg->regs + S3C_DAINTMSK);
-
-	/* Be in disconnected state until gadget is registered */
-	__orr32(hsotg->regs + S3C_DCTL, S3C_DCTL_SftDiscon);
-
-	if (0) {
-		/* post global nak until we're ready */
-		writel(S3C_DCTL_SGNPInNAK | S3C_DCTL_SGOUTNak,
-		       hsotg->regs + S3C_DCTL);
-	}
-
-	/* setup fifos */
-
-	dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
-		readl(hsotg->regs + S3C_GRXFSIZ),
-		readl(hsotg->regs + S3C_GNPTXFSIZ));
-
-	s3c_hsotg_init_fifo(hsotg);
-
-	/* set the PLL on, remove the HNP/SRP and set the PHY */
-	writel(S3C_GUSBCFG_PHYIf16 | S3C_GUSBCFG_TOutCal(7) | (0x5 << 10),
-	       hsotg->regs + S3C_GUSBCFG);
+	u32 cfg2, cfg4;
+	/* check hardware configuration */
 
-	writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0,
-	       hsotg->regs + S3C_GAHBCFG);
+	cfg2 = readl(hsotg->regs + 0x48);
+	hsotg->num_of_eps = (cfg2 >> 10) & 0xF;
 
-	/* check hardware configuration */
+	dev_info(hsotg->dev, "EPs:%d\n", hsotg->num_of_eps);
 
 	cfg4 = readl(hsotg->regs + 0x50);
 	hsotg->dedicated_fifos = (cfg4 >> 25) & 1;
@@ -2940,6 +3118,10 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
 		 hsotg->dedicated_fifos ? "dedicated" : "shared");
 }
 
+/**
+ * s3c_hsotg_dump - dump state of the udc
+ * @param: The device state
+ */
 static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
 {
 #ifdef DEBUG
@@ -2949,46 +3131,45 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
 	int idx;
 
 	dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
-		 readl(regs + S3C_DCFG), readl(regs + S3C_DCTL),
-		 readl(regs + S3C_DIEPMSK));
+		 readl(regs + DCFG), readl(regs + DCTL),
+		 readl(regs + DIEPMSK));
 
 	dev_info(dev, "GAHBCFG=0x%08x, 0x44=0x%08x\n",
-		 readl(regs + S3C_GAHBCFG), readl(regs + 0x44));
+		 readl(regs + GAHBCFG), readl(regs + 0x44));
 
 	dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
-		 readl(regs + S3C_GRXFSIZ), readl(regs + S3C_GNPTXFSIZ));
+		 readl(regs + GRXFSIZ), readl(regs + GNPTXFSIZ));
 
 	/* show periodic fifo settings */
 
 	for (idx = 1; idx <= 15; idx++) {
-		val = readl(regs + S3C_DPTXFSIZn(idx));
+		val = readl(regs + DPTXFSIZn(idx));
 		dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
-			 val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
-			 val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
+			 val >> DPTXFSIZn_DPTxFSize_SHIFT,
+			 val & DPTXFSIZn_DPTxFStAddr_MASK);
 	}
 
 	for (idx = 0; idx < 15; idx++) {
 		dev_info(dev,
 			 "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
-			 readl(regs + S3C_DIEPCTL(idx)),
-			 readl(regs + S3C_DIEPTSIZ(idx)),
-			 readl(regs + S3C_DIEPDMA(idx)));
+			 readl(regs + DIEPCTL(idx)),
+			 readl(regs + DIEPTSIZ(idx)),
+			 readl(regs + DIEPDMA(idx)));
 
-		val = readl(regs + S3C_DOEPCTL(idx));
+		val = readl(regs + DOEPCTL(idx));
 		dev_info(dev,
 			 "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
-			 idx, readl(regs + S3C_DOEPCTL(idx)),
-			 readl(regs + S3C_DOEPTSIZ(idx)),
-			 readl(regs + S3C_DOEPDMA(idx)));
+			 idx, readl(regs + DOEPCTL(idx)),
+			 readl(regs + DOEPTSIZ(idx)),
+			 readl(regs + DOEPDMA(idx)));
 
 	}
 
 	dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
-		 readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
+		 readl(regs + DVBUSDIS), readl(regs + DVBUSPULSE));
 #endif
 }
 
-
 /**
  * state_show - debugfs: show overall driver and device state.
  * @seq: The seq file to write to.
@@ -3005,38 +3186,38 @@ static int state_show(struct seq_file *seq, void *v)
 	int idx;
 
 	seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
-		 readl(regs + S3C_DCFG),
-		 readl(regs + S3C_DCTL),
-		 readl(regs + S3C_DSTS));
+		 readl(regs + DCFG),
+		 readl(regs + DCTL),
+		 readl(regs + DSTS));
 
 	seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
-		   readl(regs + S3C_DIEPMSK), readl(regs + S3C_DOEPMSK));
+		   readl(regs + DIEPMSK), readl(regs + DOEPMSK));
 
 	seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
-		   readl(regs + S3C_GINTMSK),
-		   readl(regs + S3C_GINTSTS));
+		   readl(regs + GINTMSK),
+		   readl(regs + GINTSTS));
 
 	seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
-		   readl(regs + S3C_DAINTMSK),
-		   readl(regs + S3C_DAINT));
+		   readl(regs + DAINTMSK),
+		   readl(regs + DAINT));
 
 	seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
-		   readl(regs + S3C_GNPTXSTS),
-		   readl(regs + S3C_GRXSTSR));
+		   readl(regs + GNPTXSTS),
+		   readl(regs + GRXSTSR));
 
 	seq_printf(seq, "\nEndpoint status:\n");
 
 	for (idx = 0; idx < 15; idx++) {
 		u32 in, out;
 
-		in = readl(regs + S3C_DIEPCTL(idx));
-		out = readl(regs + S3C_DOEPCTL(idx));
+		in = readl(regs + DIEPCTL(idx));
+		out = readl(regs + DOEPCTL(idx));
 
 		seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
 			   idx, in, out);
 
-		in = readl(regs + S3C_DIEPTSIZ(idx));
-		out = readl(regs + S3C_DOEPTSIZ(idx));
+		in = readl(regs + DIEPTSIZ(idx));
+		out = readl(regs + DOEPTSIZ(idx));
 
 		seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
 			   in, out);
@@ -3067,7 +3248,7 @@ static const struct file_operations state_fops = {
  *
  * Show the FIFO information for the overall fifo and all the
  * periodic transmission FIFOs.
-*/
+ */
 static int fifo_show(struct seq_file *seq, void *v)
 {
 	struct s3c_hsotg *hsotg = seq->private;
@@ -3076,21 +3257,21 @@ static int fifo_show(struct seq_file *seq, void *v)
 	int idx;
 
 	seq_printf(seq, "Non-periodic FIFOs:\n");
-	seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + S3C_GRXFSIZ));
+	seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
 
-	val = readl(regs + S3C_GNPTXFSIZ);
+	val = readl(regs + GNPTXFSIZ);
 	seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
-		   val >> S3C_GNPTXFSIZ_NPTxFDep_SHIFT,
-		   val & S3C_GNPTXFSIZ_NPTxFStAddr_MASK);
+		   val >> GNPTXFSIZ_NPTxFDep_SHIFT,
+		   val & GNPTXFSIZ_NPTxFStAddr_MASK);
 
 	seq_printf(seq, "\nPeriodic TXFIFOs:\n");
 
 	for (idx = 1; idx <= 15; idx++) {
-		val = readl(regs + S3C_DPTXFSIZn(idx));
+		val = readl(regs + DPTXFSIZn(idx));
 
 		seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
-			   val >> S3C_DPTXFSIZn_DPTxFSize_SHIFT,
-			   val & S3C_DPTXFSIZn_DPTxFStAddr_MASK);
+			   val >> DPTXFSIZn_DPTxFSize_SHIFT,
+			   val & DPTXFSIZn_DPTxFStAddr_MASK);
 	}
 
 	return 0;
@@ -3122,7 +3303,7 @@ static const char *decode_direction(int is_in)
  *
  * This debugfs entry shows the state of the given endpoint (one is
  * registered for each available).
-*/
+ */
 static int ep_show(struct seq_file *seq, void *v)
 {
 	struct s3c_hsotg_ep *ep = seq->private;
@@ -3139,20 +3320,20 @@ static int ep_show(struct seq_file *seq, void *v)
 	/* first show the register state */
 
 	seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
-		   readl(regs + S3C_DIEPCTL(index)),
-		   readl(regs + S3C_DOEPCTL(index)));
+		   readl(regs + DIEPCTL(index)),
+		   readl(regs + DOEPCTL(index)));
 
 	seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
-		   readl(regs + S3C_DIEPDMA(index)),
-		   readl(regs + S3C_DOEPDMA(index)));
+		   readl(regs + DIEPDMA(index)),
+		   readl(regs + DOEPDMA(index)));
 
 	seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
-		   readl(regs + S3C_DIEPINT(index)),
-		   readl(regs + S3C_DOEPINT(index)));
+		   readl(regs + DIEPINT(index)),
+		   readl(regs + DOEPINT(index)));
 
 	seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
-		   readl(regs + S3C_DIEPTSIZ(index)),
-		   readl(regs + S3C_DOEPTSIZ(index)));
+		   readl(regs + DIEPTSIZ(index)),
+		   readl(regs + DOEPTSIZ(index)));
 
 	seq_printf(seq, "\n");
 	seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
@@ -3202,7 +3383,7 @@ static const struct file_operations ep_fops = {
  * about the state of the system. The directory name is created
  * with the same name as the device itself, in case we end up
  * with multiple blocks in future systems.
-*/
+ */
 static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
 {
 	struct dentry *root;
@@ -3231,7 +3412,7 @@ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
 
 	/* create one file for each endpoint */
 
-	for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
+	for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
 		struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
 
 		ep->debugfs = debugfs_create_file(ep->name, 0444,
@@ -3248,12 +3429,12 @@ static void __devinit s3c_hsotg_create_debug(struct s3c_hsotg *hsotg)
  * @hsotg: The driver state
  *
  * Cleanup (remove) the debugfs files for use on module exit.
-*/
+ */
 static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
 {
 	unsigned epidx;
 
-	for (epidx = 0; epidx < S3C_HSOTG_EPS; epidx++) {
+	for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
 		struct s3c_hsotg_ep *ep = &hsotg->eps[epidx];
 		debugfs_remove(ep->debugfs);
 	}
@@ -3264,48 +3445,39 @@ static void __devexit s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
 }
 
 /**
- * s3c_hsotg_gate - set the hardware gate for the block
- * @pdev: The device we bound to
- * @on: On or off.
- *
- * Set the hardware gate setting into the block. If we end up on
- * something other than an S3C64XX, then we might need to change this
- * to using a platform data callback, or some other mechanism.
+ * s3c_hsotg_release - release callback for hsotg device
+ * @dev: Device to for which release is called
  */
-static void s3c_hsotg_gate(struct platform_device *pdev, bool on)
+static void s3c_hsotg_release(struct device *dev)
 {
-	unsigned long flags;
-	u32 others;
-
-	local_irq_save(flags);
-
-	others = __raw_readl(S3C64XX_OTHERS);
-	if (on)
-		others |= S3C64XX_OTHERS_USBMASK;
-	else
-		others &= ~S3C64XX_OTHERS_USBMASK;
-	__raw_writel(others, S3C64XX_OTHERS);
+	struct s3c_hsotg *hsotg = dev_get_drvdata(dev);
 
-	local_irq_restore(flags);
+	kfree(hsotg);
 }
 
-static struct s3c_hsotg_plat s3c_hsotg_default_pdata;
+/**
+ * s3c_hsotg_probe - probe function for hsotg driver
+ * @pdev: The platform information for the driver
+ */
 
 static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 {
 	struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
 	struct device *dev = &pdev->dev;
+	struct s3c_hsotg_ep *eps;
 	struct s3c_hsotg *hsotg;
 	struct resource *res;
 	int epnum;
 	int ret;
+	int i;
 
-	if (!plat)
-		plat = &s3c_hsotg_default_pdata;
+	plat = pdev->dev.platform_data;
+	if (!plat) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
 
-	hsotg = kzalloc(sizeof(struct s3c_hsotg) +
-			sizeof(struct s3c_hsotg_ep) * S3C_HSOTG_EPS,
-			GFP_KERNEL);
+	hsotg = kzalloc(sizeof(struct s3c_hsotg), GFP_KERNEL);
 	if (!hsotg) {
 		dev_err(dev, "cannot get memory\n");
 		return -ENOMEM;
@@ -3371,6 +3543,54 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 
 	hsotg->gadget.dev.parent = dev;
 	hsotg->gadget.dev.dma_mask = dev->dma_mask;
+	hsotg->gadget.dev.release = s3c_hsotg_release;
+
+	/* reset the system */
+
+	clk_prepare_enable(hsotg->clk);
+
+	/* regulators */
+
+	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
+		hsotg->supplies[i].supply = s3c_hsotg_supply_names[i];
+
+	ret = regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies),
+				 hsotg->supplies);
+	if (ret) {
+		dev_err(dev, "failed to request supplies: %d\n", ret);
+		goto err_irq;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
+				    hsotg->supplies);
+
+	if (ret) {
+		dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret);
+		goto err_supplies;
+	}
+
+	/* usb phy enable */
+	s3c_hsotg_phy_enable(hsotg);
+
+	s3c_hsotg_corereset(hsotg);
+	s3c_hsotg_init(hsotg);
+	s3c_hsotg_hw_cfg(hsotg);
+
+	/* hsotg->num_of_eps holds number of EPs other than ep0 */
+
+	if (hsotg->num_of_eps == 0) {
+		dev_err(dev, "wrong number of EPs (zero)\n");
+		goto err_supplies;
+	}
+
+	eps = kcalloc(hsotg->num_of_eps + 1, sizeof(struct s3c_hsotg_ep),
+		      GFP_KERNEL);
+	if (!eps) {
+		dev_err(dev, "cannot get memory\n");
+		goto err_supplies;
+	}
+
+	hsotg->eps = eps;
 
 	/* setup endpoint information */
 
@@ -3383,39 +3603,47 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 						     GFP_KERNEL);
 	if (!hsotg->ctrl_req) {
 		dev_err(dev, "failed to allocate ctrl req\n");
-		goto err_regs;
+		goto err_ep_mem;
 	}
 
-	/* reset the system */
+	/* initialise the endpoints now the core has been initialised */
+	for (epnum = 0; epnum < hsotg->num_of_eps; epnum++)
+		s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
 
-	clk_enable(hsotg->clk);
+	/* disable power and clock */
 
-	s3c_hsotg_gate(pdev, true);
+	ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
+				    hsotg->supplies);
+	if (ret) {
+		dev_err(hsotg->dev, "failed to disable supplies: %d\n", ret);
+		goto err_ep_mem;
+	}
 
-	s3c_hsotg_otgreset(hsotg);
-	s3c_hsotg_corereset(hsotg);
-	s3c_hsotg_init(hsotg);
+	s3c_hsotg_phy_disable(hsotg);
 
-	/* initialise the endpoints now the core has been initialised */
-	for (epnum = 0; epnum < S3C_HSOTG_EPS; epnum++)
-		s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
+	ret = device_add(&hsotg->gadget.dev);
+	if (ret) {
+		put_device(&hsotg->gadget.dev);
+		goto err_ep_mem;
+	}
 
 	ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget);
 	if (ret)
-		goto err_add_udc;
+		goto err_ep_mem;
 
 	s3c_hsotg_create_debug(hsotg);
 
 	s3c_hsotg_dump(hsotg);
 
-	our_hsotg = hsotg;
 	return 0;
 
-err_add_udc:
-	s3c_hsotg_gate(pdev, false);
-	clk_disable(hsotg->clk);
-	clk_put(hsotg->clk);
-
+err_ep_mem:
+	kfree(eps);
+err_supplies:
+	s3c_hsotg_phy_disable(hsotg);
+	regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+err_irq:
+	free_irq(hsotg->irq, hsotg);
 err_regs:
 	iounmap(hsotg->regs);
 
@@ -3423,12 +3651,17 @@ err_regs_res:
 	release_resource(hsotg->regs_res);
 	kfree(hsotg->regs_res);
 err_clk:
+	clk_disable_unprepare(hsotg->clk);
 	clk_put(hsotg->clk);
 err_mem:
 	kfree(hsotg);
 	return ret;
 }
 
+/**
+ * s3c_hsotg_remove - remove function for hsotg driver
+ * @pdev: The platform information for the driver
+ */
 static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
 {
 	struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
@@ -3437,7 +3670,10 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
 
 	s3c_hsotg_delete_debug(hsotg);
 
-	usb_gadget_unregister_driver(hsotg->driver);
+	if (hsotg->driver) {
+		/* should have been done already by driver model core */
+		usb_gadget_unregister_driver(hsotg->driver);
+	}
 
 	free_irq(hsotg->irq, hsotg);
 	iounmap(hsotg->regs);
@@ -3445,12 +3681,13 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
 	release_resource(hsotg->regs_res);
 	kfree(hsotg->regs_res);
 
-	s3c_hsotg_gate(pdev, false);
+	s3c_hsotg_phy_disable(hsotg);
+	regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
 
-	clk_disable(hsotg->clk);
+	clk_disable_unprepare(hsotg->clk);
 	clk_put(hsotg->clk);
 
-	kfree(hsotg);
+	device_unregister(&hsotg->gadget.dev);
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/s3c-hsotg.h b/drivers/usb/gadget/s3c-hsotg.h
new file mode 100644
index 000000000000..d650b1295831
--- /dev/null
+++ b/drivers/usb/gadget/s3c-hsotg.h
@@ -0,0 +1,377 @@
+/* drivers/usb/gadget/s3c-hsotg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * USB2.0 Highspeed/OtG Synopsis DWC2 device block registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __REGS_USB_HSOTG_H
+#define __REGS_USB_HSOTG_H __FILE__
+
+#define HSOTG_REG(x) (x)
+
+#define GOTGCTL				HSOTG_REG(0x000)
+#define GOTGCTL_BSESVLD			(1 << 19)
+#define GOTGCTL_ASESVLD			(1 << 18)
+#define GOTGCTL_DBNC_SHORT			(1 << 17)
+#define GOTGCTL_CONID_B			(1 << 16)
+#define GOTGCTL_DEVHNPEN			(1 << 11)
+#define GOTGCTL_HSSETHNPEN			(1 << 10)
+#define GOTGCTL_HNPREQ				(1 << 9)
+#define GOTGCTL_HSTNEGSCS			(1 << 8)
+#define GOTGCTL_SESREQ				(1 << 1)
+#define GOTGCTL_SESREQSCS			(1 << 0)
+
+#define GOTGINT				HSOTG_REG(0x004)
+#define GOTGINT_DbnceDone			(1 << 19)
+#define GOTGINT_ADevTOUTChg			(1 << 18)
+#define GOTGINT_HstNegDet			(1 << 17)
+#define GOTGINT_HstnegSucStsChng		(1 << 9)
+#define GOTGINT_SesReqSucStsChng		(1 << 8)
+#define GOTGINT_SesEndDet			(1 << 2)
+
+#define GAHBCFG				HSOTG_REG(0x008)
+#define GAHBCFG_PTxFEmpLvl			(1 << 8)
+#define GAHBCFG_NPTxFEmpLvl			(1 << 7)
+#define GAHBCFG_DMAEn				(1 << 5)
+#define GAHBCFG_HBstLen_MASK			(0xf << 1)
+#define GAHBCFG_HBstLen_SHIFT			(1)
+#define GAHBCFG_HBstLen_Single			(0x0 << 1)
+#define GAHBCFG_HBstLen_Incr			(0x1 << 1)
+#define GAHBCFG_HBstLen_Incr4			(0x3 << 1)
+#define GAHBCFG_HBstLen_Incr8			(0x5 << 1)
+#define GAHBCFG_HBstLen_Incr16			(0x7 << 1)
+#define GAHBCFG_GlblIntrEn			(1 << 0)
+
+#define GUSBCFG				HSOTG_REG(0x00C)
+#define GUSBCFG_PHYLPClkSel			(1 << 15)
+#define GUSBCFG_HNPCap				(1 << 9)
+#define GUSBCFG_SRPCap				(1 << 8)
+#define GUSBCFG_PHYIf16			(1 << 3)
+#define GUSBCFG_TOutCal_MASK			(0x7 << 0)
+#define GUSBCFG_TOutCal_SHIFT			(0)
+#define GUSBCFG_TOutCal_LIMIT			(0x7)
+#define GUSBCFG_TOutCal(_x)			((_x) << 0)
+
+#define GRSTCTL				HSOTG_REG(0x010)
+
+#define GRSTCTL_AHBIdle			(1 << 31)
+#define GRSTCTL_DMAReq				(1 << 30)
+#define GRSTCTL_TxFNum_MASK			(0x1f << 6)
+#define GRSTCTL_TxFNum_SHIFT			(6)
+#define GRSTCTL_TxFNum_LIMIT			(0x1f)
+#define GRSTCTL_TxFNum(_x)			((_x) << 6)
+#define GRSTCTL_TxFFlsh			(1 << 5)
+#define GRSTCTL_RxFFlsh			(1 << 4)
+#define GRSTCTL_INTknQFlsh			(1 << 3)
+#define GRSTCTL_FrmCntrRst			(1 << 2)
+#define GRSTCTL_HSftRst			(1 << 1)
+#define GRSTCTL_CSftRst			(1 << 0)
+
+#define GINTSTS				HSOTG_REG(0x014)
+#define GINTMSK				HSOTG_REG(0x018)
+
+#define GINTSTS_WkUpInt			(1 << 31)
+#define GINTSTS_SessReqInt			(1 << 30)
+#define GINTSTS_DisconnInt			(1 << 29)
+#define GINTSTS_ConIDStsChng			(1 << 28)
+#define GINTSTS_PTxFEmp			(1 << 26)
+#define GINTSTS_HChInt				(1 << 25)
+#define GINTSTS_PrtInt				(1 << 24)
+#define GINTSTS_FetSusp			(1 << 22)
+#define GINTSTS_incompIP			(1 << 21)
+#define GINTSTS_IncomplSOIN			(1 << 20)
+#define GINTSTS_OEPInt				(1 << 19)
+#define GINTSTS_IEPInt				(1 << 18)
+#define GINTSTS_EPMis				(1 << 17)
+#define GINTSTS_EOPF				(1 << 15)
+#define GINTSTS_ISOutDrop			(1 << 14)
+#define GINTSTS_EnumDone			(1 << 13)
+#define GINTSTS_USBRst				(1 << 12)
+#define GINTSTS_USBSusp			(1 << 11)
+#define GINTSTS_ErlySusp			(1 << 10)
+#define GINTSTS_GOUTNakEff			(1 << 7)
+#define GINTSTS_GINNakEff			(1 << 6)
+#define GINTSTS_NPTxFEmp			(1 << 5)
+#define GINTSTS_RxFLvl				(1 << 4)
+#define GINTSTS_SOF				(1 << 3)
+#define GINTSTS_OTGInt				(1 << 2)
+#define GINTSTS_ModeMis			(1 << 1)
+#define GINTSTS_CurMod_Host			(1 << 0)
+
+#define GRXSTSR				HSOTG_REG(0x01C)
+#define GRXSTSP				HSOTG_REG(0x020)
+
+#define GRXSTS_FN_MASK				(0x7f << 25)
+#define GRXSTS_FN_SHIFT			(25)
+
+#define GRXSTS_PktSts_MASK			(0xf << 17)
+#define GRXSTS_PktSts_SHIFT			(17)
+#define GRXSTS_PktSts_GlobalOutNAK		(0x1 << 17)
+#define GRXSTS_PktSts_OutRX			(0x2 << 17)
+#define GRXSTS_PktSts_OutDone			(0x3 << 17)
+#define GRXSTS_PktSts_SetupDone		(0x4 << 17)
+#define GRXSTS_PktSts_SetupRX			(0x6 << 17)
+
+#define GRXSTS_DPID_MASK			(0x3 << 15)
+#define GRXSTS_DPID_SHIFT			(15)
+#define GRXSTS_ByteCnt_MASK			(0x7ff << 4)
+#define GRXSTS_ByteCnt_SHIFT			(4)
+#define GRXSTS_EPNum_MASK			(0xf << 0)
+#define GRXSTS_EPNum_SHIFT			(0)
+
+#define GRXFSIZ				HSOTG_REG(0x024)
+
+#define GNPTXFSIZ				HSOTG_REG(0x028)
+
+#define GNPTXFSIZ_NPTxFDep_MASK		(0xffff << 16)
+#define GNPTXFSIZ_NPTxFDep_SHIFT		(16)
+#define GNPTXFSIZ_NPTxFDep_LIMIT		(0xffff)
+#define GNPTXFSIZ_NPTxFDep(_x)			((_x) << 16)
+#define GNPTXFSIZ_NPTxFStAddr_MASK		(0xffff << 0)
+#define GNPTXFSIZ_NPTxFStAddr_SHIFT		(0)
+#define GNPTXFSIZ_NPTxFStAddr_LIMIT		(0xffff)
+#define GNPTXFSIZ_NPTxFStAddr(_x)		((_x) << 0)
+
+#define GNPTXSTS				HSOTG_REG(0x02C)
+
+#define GNPTXSTS_NPtxQTop_MASK			(0x7f << 24)
+#define GNPTXSTS_NPtxQTop_SHIFT		(24)
+
+#define GNPTXSTS_NPTxQSpcAvail_MASK		(0xff << 16)
+#define GNPTXSTS_NPTxQSpcAvail_SHIFT		(16)
+#define GNPTXSTS_NPTxQSpcAvail_GET(_v)		(((_v) >> 16) & 0xff)
+
+#define GNPTXSTS_NPTxFSpcAvail_MASK		(0xffff << 0)
+#define GNPTXSTS_NPTxFSpcAvail_SHIFT		(0)
+#define GNPTXSTS_NPTxFSpcAvail_GET(_v)		(((_v) >> 0) & 0xffff)
+
+
+#define HPTXFSIZ				HSOTG_REG(0x100)
+
+#define DPTXFSIZn(_a)		HSOTG_REG(0x104 + (((_a) - 1) * 4))
+
+#define DPTXFSIZn_DPTxFSize_MASK		(0xffff << 16)
+#define DPTXFSIZn_DPTxFSize_SHIFT		(16)
+#define DPTXFSIZn_DPTxFSize_GET(_v)		(((_v) >> 16) & 0xffff)
+#define DPTXFSIZn_DPTxFSize_LIMIT		(0xffff)
+#define DPTXFSIZn_DPTxFSize(_x)		((_x) << 16)
+
+#define DPTXFSIZn_DPTxFStAddr_MASK		(0xffff << 0)
+#define DPTXFSIZn_DPTxFStAddr_SHIFT		(0)
+
+/* Device mode registers */
+#define DCFG					HSOTG_REG(0x800)
+
+#define DCFG_EPMisCnt_MASK			(0x1f << 18)
+#define DCFG_EPMisCnt_SHIFT			(18)
+#define DCFG_EPMisCnt_LIMIT			(0x1f)
+#define DCFG_EPMisCnt(_x)			((_x) << 18)
+
+#define DCFG_PerFrInt_MASK			(0x3 << 11)
+#define DCFG_PerFrInt_SHIFT			(11)
+#define DCFG_PerFrInt_LIMIT			(0x3)
+#define DCFG_PerFrInt(_x)			((_x) << 11)
+
+#define DCFG_DevAddr_MASK			(0x7f << 4)
+#define DCFG_DevAddr_SHIFT			(4)
+#define DCFG_DevAddr_LIMIT			(0x7f)
+#define DCFG_DevAddr(_x)			((_x) << 4)
+
+#define DCFG_NZStsOUTHShk			(1 << 2)
+
+#define DCFG_DevSpd_MASK			(0x3 << 0)
+#define DCFG_DevSpd_SHIFT			(0)
+#define DCFG_DevSpd_HS				(0x0 << 0)
+#define DCFG_DevSpd_FS				(0x1 << 0)
+#define DCFG_DevSpd_LS				(0x2 << 0)
+#define DCFG_DevSpd_FS48			(0x3 << 0)
+
+#define DCTL					HSOTG_REG(0x804)
+
+#define DCTL_PWROnPrgDone			(1 << 11)
+#define DCTL_CGOUTNak				(1 << 10)
+#define DCTL_SGOUTNak				(1 << 9)
+#define DCTL_CGNPInNAK				(1 << 8)
+#define DCTL_SGNPInNAK				(1 << 7)
+#define DCTL_TstCtl_MASK			(0x7 << 4)
+#define DCTL_TstCtl_SHIFT			(4)
+#define DCTL_GOUTNakSts			(1 << 3)
+#define DCTL_GNPINNakSts			(1 << 2)
+#define DCTL_SftDiscon				(1 << 1)
+#define DCTL_RmtWkUpSig			(1 << 0)
+
+#define DSTS					HSOTG_REG(0x808)
+
+#define DSTS_SOFFN_MASK			(0x3fff << 8)
+#define DSTS_SOFFN_SHIFT			(8)
+#define DSTS_SOFFN_LIMIT			(0x3fff)
+#define DSTS_SOFFN(_x)				((_x) << 8)
+#define DSTS_ErraticErr			(1 << 3)
+#define DSTS_EnumSpd_MASK			(0x3 << 1)
+#define DSTS_EnumSpd_SHIFT			(1)
+#define DSTS_EnumSpd_HS			(0x0 << 1)
+#define DSTS_EnumSpd_FS			(0x1 << 1)
+#define DSTS_EnumSpd_LS			(0x2 << 1)
+#define DSTS_EnumSpd_FS48			(0x3 << 1)
+
+#define DSTS_SuspSts				(1 << 0)
+
+#define DIEPMSK				HSOTG_REG(0x810)
+
+#define DIEPMSK_TxFIFOEmpty			(1 << 7)
+#define DIEPMSK_INEPNakEffMsk			(1 << 6)
+#define DIEPMSK_INTknEPMisMsk			(1 << 5)
+#define DIEPMSK_INTknTXFEmpMsk			(1 << 4)
+#define DIEPMSK_TimeOUTMsk			(1 << 3)
+#define DIEPMSK_AHBErrMsk			(1 << 2)
+#define DIEPMSK_EPDisbldMsk			(1 << 1)
+#define DIEPMSK_XferComplMsk			(1 << 0)
+
+#define DOEPMSK				HSOTG_REG(0x814)
+
+#define DOEPMSK_Back2BackSetup			(1 << 6)
+#define DOEPMSK_OUTTknEPdisMsk			(1 << 4)
+#define DOEPMSK_SetupMsk			(1 << 3)
+#define DOEPMSK_AHBErrMsk			(1 << 2)
+#define DOEPMSK_EPDisbldMsk			(1 << 1)
+#define DOEPMSK_XferComplMsk			(1 << 0)
+
+#define DAINT					HSOTG_REG(0x818)
+#define DAINTMSK				HSOTG_REG(0x81C)
+
+#define DAINT_OutEP_SHIFT			(16)
+#define DAINT_OutEP(x)				(1 << ((x) + 16))
+#define DAINT_InEP(x)				(1 << (x))
+
+#define DTKNQR1				HSOTG_REG(0x820)
+#define DTKNQR2				HSOTG_REG(0x824)
+#define DTKNQR3				HSOTG_REG(0x830)
+#define DTKNQR4				HSOTG_REG(0x834)
+
+#define DVBUSDIS				HSOTG_REG(0x828)
+#define DVBUSPULSE				HSOTG_REG(0x82C)
+
+#define DIEPCTL0				HSOTG_REG(0x900)
+#define DOEPCTL0				HSOTG_REG(0xB00)
+#define DIEPCTL(_a)			HSOTG_REG(0x900 + ((_a) * 0x20))
+#define DOEPCTL(_a)			HSOTG_REG(0xB00 + ((_a) * 0x20))
+
+/* EP0 specialness:
+ * bits[29..28] - reserved (no SetD0PID, SetD1PID)
+ * bits[25..22] - should always be zero, this isn't a periodic endpoint
+ * bits[10..0] - MPS setting differenct for EP0
+ */
+#define D0EPCTL_MPS_MASK			(0x3 << 0)
+#define D0EPCTL_MPS_SHIFT			(0)
+#define D0EPCTL_MPS_64				(0x0 << 0)
+#define D0EPCTL_MPS_32				(0x1 << 0)
+#define D0EPCTL_MPS_16				(0x2 << 0)
+#define D0EPCTL_MPS_8				(0x3 << 0)
+
+#define DxEPCTL_EPEna				(1 << 31)
+#define DxEPCTL_EPDis				(1 << 30)
+#define DxEPCTL_SetD1PID			(1 << 29)
+#define DxEPCTL_SetOddFr			(1 << 29)
+#define DxEPCTL_SetD0PID			(1 << 28)
+#define DxEPCTL_SetEvenFr			(1 << 28)
+#define DxEPCTL_SNAK				(1 << 27)
+#define DxEPCTL_CNAK				(1 << 26)
+#define DxEPCTL_TxFNum_MASK			(0xf << 22)
+#define DxEPCTL_TxFNum_SHIFT			(22)
+#define DxEPCTL_TxFNum_LIMIT			(0xf)
+#define DxEPCTL_TxFNum(_x)			((_x) << 22)
+
+#define DxEPCTL_Stall				(1 << 21)
+#define DxEPCTL_Snp				(1 << 20)
+#define DxEPCTL_EPType_MASK			(0x3 << 18)
+#define DxEPCTL_EPType_SHIFT			(18)
+#define DxEPCTL_EPType_Control			(0x0 << 18)
+#define DxEPCTL_EPType_Iso			(0x1 << 18)
+#define DxEPCTL_EPType_Bulk			(0x2 << 18)
+#define DxEPCTL_EPType_Intterupt		(0x3 << 18)
+
+#define DxEPCTL_NAKsts				(1 << 17)
+#define DxEPCTL_DPID				(1 << 16)
+#define DxEPCTL_EOFrNum			(1 << 16)
+#define DxEPCTL_USBActEp			(1 << 15)
+#define DxEPCTL_NextEp_MASK			(0xf << 11)
+#define DxEPCTL_NextEp_SHIFT			(11)
+#define DxEPCTL_NextEp_LIMIT			(0xf)
+#define DxEPCTL_NextEp(_x)			((_x) << 11)
+
+#define DxEPCTL_MPS_MASK			(0x7ff << 0)
+#define DxEPCTL_MPS_SHIFT			(0)
+#define DxEPCTL_MPS_LIMIT			(0x7ff)
+#define DxEPCTL_MPS(_x)			((_x) << 0)
+
+#define DIEPINT(_a)			HSOTG_REG(0x908 + ((_a) * 0x20))
+#define DOEPINT(_a)			HSOTG_REG(0xB08 + ((_a) * 0x20))
+
+#define DxEPINT_INEPNakEff			(1 << 6)
+#define DxEPINT_Back2BackSetup			(1 << 6)
+#define DxEPINT_INTknEPMis			(1 << 5)
+#define DxEPINT_INTknTXFEmp			(1 << 4)
+#define DxEPINT_OUTTknEPdis			(1 << 4)
+#define DxEPINT_Timeout			(1 << 3)
+#define DxEPINT_Setup				(1 << 3)
+#define DxEPINT_AHBErr				(1 << 2)
+#define DxEPINT_EPDisbld			(1 << 1)
+#define DxEPINT_XferCompl			(1 << 0)
+
+#define DIEPTSIZ0				HSOTG_REG(0x910)
+
+#define DIEPTSIZ0_PktCnt_MASK			(0x3 << 19)
+#define DIEPTSIZ0_PktCnt_SHIFT			(19)
+#define DIEPTSIZ0_PktCnt_LIMIT			(0x3)
+#define DIEPTSIZ0_PktCnt(_x)			((_x) << 19)
+
+#define DIEPTSIZ0_XferSize_MASK		(0x7f << 0)
+#define DIEPTSIZ0_XferSize_SHIFT		(0)
+#define DIEPTSIZ0_XferSize_LIMIT		(0x7f)
+#define DIEPTSIZ0_XferSize(_x)			((_x) << 0)
+
+#define DOEPTSIZ0				HSOTG_REG(0xB10)
+#define DOEPTSIZ0_SUPCnt_MASK			(0x3 << 29)
+#define DOEPTSIZ0_SUPCnt_SHIFT			(29)
+#define DOEPTSIZ0_SUPCnt_LIMIT			(0x3)
+#define DOEPTSIZ0_SUPCnt(_x)			((_x) << 29)
+
+#define DOEPTSIZ0_PktCnt			(1 << 19)
+#define DOEPTSIZ0_XferSize_MASK		(0x7f << 0)
+#define DOEPTSIZ0_XferSize_SHIFT		(0)
+
+#define DIEPTSIZ(_a)			HSOTG_REG(0x910 + ((_a) * 0x20))
+#define DOEPTSIZ(_a)			HSOTG_REG(0xB10 + ((_a) * 0x20))
+
+#define DxEPTSIZ_MC_MASK			(0x3 << 29)
+#define DxEPTSIZ_MC_SHIFT			(29)
+#define DxEPTSIZ_MC_LIMIT			(0x3)
+#define DxEPTSIZ_MC(_x)			((_x) << 29)
+
+#define DxEPTSIZ_PktCnt_MASK			(0x3ff << 19)
+#define DxEPTSIZ_PktCnt_SHIFT			(19)
+#define DxEPTSIZ_PktCnt_GET(_v)		(((_v) >> 19) & 0x3ff)
+#define DxEPTSIZ_PktCnt_LIMIT			(0x3ff)
+#define DxEPTSIZ_PktCnt(_x)			((_x) << 19)
+
+#define DxEPTSIZ_XferSize_MASK			(0x7ffff << 0)
+#define DxEPTSIZ_XferSize_SHIFT		(0)
+#define DxEPTSIZ_XferSize_GET(_v)		(((_v) >> 0) & 0x7ffff)
+#define DxEPTSIZ_XferSize_LIMIT		(0x7ffff)
+#define DxEPTSIZ_XferSize(_x)			((_x) << 0)
+
+#define DIEPDMA(_a)			HSOTG_REG(0x914 + ((_a) * 0x20))
+#define DOEPDMA(_a)			HSOTG_REG(0xB14 + ((_a) * 0x20))
+#define DTXFSTS(_a)			HSOTG_REG(0x918 + ((_a) * 0x20))
+
+#define EPFIFO(_a)			HSOTG_REG(0x1000 + ((_a) * 0x1000))
+
+#endif /* __REGS_USB_HSOTG_H */
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index cef9b82ff911..36c6836eeb0f 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -110,7 +110,6 @@ struct s3c_hsudc_ep {
 	struct usb_ep ep;
 	char name[20];
 	struct s3c_hsudc *dev;
-	const struct usb_endpoint_descriptor *desc;
 	struct list_head queue;
 	u8 stopped;
 	u8 wedge;
@@ -761,7 +760,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
 	u32 ecr = 0;
 
 	hsep = our_ep(_ep);
-	if (!_ep || !desc || hsep->desc || _ep->name == ep0name
+	if (!_ep || !desc || hsep->ep.desc || _ep->name == ep0name
 		|| desc->bDescriptorType != USB_DT_ENDPOINT
 		|| hsep->bEndpointAddress != desc->bEndpointAddress
 		|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
@@ -783,7 +782,7 @@ static int s3c_hsudc_ep_enable(struct usb_ep *_ep,
 	writel(ecr, hsudc->regs + S3C_ECR);
 
 	hsep->stopped = hsep->wedge = 0;
-	hsep->desc = desc;
+	hsep->ep.desc = desc;
 	hsep->ep.maxpacket = usb_endpoint_maxp(desc);
 
 	s3c_hsudc_set_halt(_ep, 0);
@@ -806,7 +805,7 @@ static int s3c_hsudc_ep_disable(struct usb_ep *_ep)
 	struct s3c_hsudc *hsudc = hsep->dev;
 	unsigned long flags;
 
-	if (!_ep || !hsep->desc)
+	if (!_ep || !hsep->ep.desc)
 		return -EINVAL;
 
 	spin_lock_irqsave(&hsudc->lock, flags);
@@ -816,7 +815,6 @@ static int s3c_hsudc_ep_disable(struct usb_ep *_ep)
 
 	s3c_hsudc_nuke_ep(hsep, -ESHUTDOWN);
 
-	hsep->desc = 0;
 	hsep->ep.desc = NULL;
 	hsep->stopped = 1;
 
@@ -1006,7 +1004,6 @@ static void s3c_hsudc_initep(struct s3c_hsudc *hsudc,
 	hsep->ep.maxpacket = epnum ? 512 : 64;
 	hsep->ep.ops = &s3c_hsudc_ep_ops;
 	hsep->fifo = hsudc->regs + S3C_BR(epnum);
-	hsep->desc = 0;
 	hsep->ep.desc = NULL;
 	hsep->stopped = 0;
 	hsep->wedge = 0;
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 195524cde6c3..3de71d37d75e 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1062,7 +1062,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 
 	ep = to_s3c2410_ep(_ep);
 
-	if (!_ep || !desc || ep->desc
+	if (!_ep || !desc || ep->ep.desc
 			|| _ep->name == ep0name
 			|| desc->bDescriptorType != USB_DT_ENDPOINT)
 		return -EINVAL;
@@ -1075,7 +1075,7 @@ static int s3c2410_udc_ep_enable(struct usb_ep *_ep,
 
 	local_irq_save (flags);
 	_ep->maxpacket = max & 0x7ff;
-	ep->desc = desc;
+	ep->ep.desc = desc;
 	ep->halted = 0;
 	ep->bEndpointAddress = desc->bEndpointAddress;
 
@@ -1136,7 +1136,7 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep)
 	unsigned long flags;
 	u32 int_en_reg;
 
-	if (!_ep || !ep->desc) {
+	if (!_ep || !ep->ep.desc) {
 		dprintk(DEBUG_NORMAL, "%s not enabled\n",
 			_ep ? ep->ep.name : NULL);
 		return -EINVAL;
@@ -1146,7 +1146,6 @@ static int s3c2410_udc_ep_disable(struct usb_ep *_ep)
 
 	dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name);
 
-	ep->desc = NULL;
 	ep->ep.desc = NULL;
 	ep->halted = 1;
 
@@ -1195,7 +1194,7 @@ s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req)
 
 	dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req);
 
-	if (!ep || !_req || (!ep->desc && _ep->name != ep0name))
+	if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name))
 		return;
 
 	WARN_ON (!list_empty (&req->queue));
@@ -1215,7 +1214,7 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
 	int			fifo_count = 0;
 	unsigned long		flags;
 
-	if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+	if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) {
 		dprintk(DEBUG_NORMAL, "%s: invalid args\n", __func__);
 		return -EINVAL;
 	}
@@ -1363,7 +1362,7 @@ static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value)
 	unsigned long		flags;
 	u32			idx;
 
-	if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+	if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) {
 		dprintk(DEBUG_NORMAL, "%s: inval 2\n", __func__);
 		return -EINVAL;
 	}
@@ -1629,7 +1628,6 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev)
 			list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
 
 		ep->dev = dev;
-		ep->desc = NULL;
 		ep->ep.desc = NULL;
 		ep->halted = 0;
 		INIT_LIST_HEAD (&ep->queue);
diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/s3c2410_udc.h
index 1653bae08b80..3e80fd5c820f 100644
--- a/drivers/usb/gadget/s3c2410_udc.h
+++ b/drivers/usb/gadget/s3c2410_udc.h
@@ -19,7 +19,6 @@ struct s3c2410_ep {
 	unsigned long			last_io;	/* jiffies timestamp */
 	struct usb_gadget		*gadget;
 	struct s3c2410_udc		*dev;
-	const struct usb_endpoint_descriptor *desc;
 	struct usb_ep			ep;
 	u8				num;
 
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 29c854bbca44..47cf48b51c9d 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -744,10 +744,11 @@ static struct device_type gadget_type = {
 };
 
 /**
- * gether_setup - initialize one ethernet-over-usb link
+ * gether_setup_name - initialize one ethernet-over-usb link
  * @g: gadget to associated with these links
  * @ethaddr: NULL, or a buffer in which the ethernet address of the
  *	host side of the link is recorded
+ * @netname: name for network device (for example, "usb")
  * Context: may sleep
  *
  * This sets up the single network link that may be exported by a
@@ -756,7 +757,8 @@ static struct device_type gadget_type = {
  *
  * Returns negative errno, or zero on success
  */
-int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
+int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
+		const char *netname)
 {
 	struct eth_dev		*dev;
 	struct net_device	*net;
@@ -780,7 +782,7 @@ int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
 
 	/* network device setup */
 	dev->net = net;
-	strcpy(net->name, "usb%d");
+	snprintf(net->name, sizeof(net->name), "%s%%d", netname);
 
 	if (get_ether_addr(dev_addr, net->dev_addr))
 		dev_warn(&g->dev,
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index 8012357e98aa..6f4a1623d854 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -69,9 +69,28 @@ struct gether {
 			|USB_CDC_PACKET_TYPE_PROMISCUOUS \
 			|USB_CDC_PACKET_TYPE_DIRECTED)
 
+/* variant of gether_setup that allows customizing network device name */
+int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN],
+		const char *netname);
 
 /* netdev setup/teardown as directed by the gadget driver */
-int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]);
+/* gether_setup - initialize one ethernet-over-usb link
+ * @g: gadget to associated with these links
+ * @ethaddr: NULL, or a buffer in which the ethernet address of the
+ *	host side of the link is recorded
+ * Context: may sleep
+ *
+ * This sets up the single network link that may be exported by a
+ * gadget driver using this framework.  The link layer addresses are
+ * set up using module parameters.
+ *
+ * Returns negative errno, or zero on success
+ */
+static inline int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
+{
+	return gether_setup_name(g, ethaddr, "usb");
+}
+
 void gether_cleanup(void);
 
 /* connect/disconnect is handled by individual functions */
@@ -99,16 +118,37 @@ int eem_bind_config(struct usb_configuration *c);
 
 #ifdef USB_ETH_RNDIS
 
-int rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+int rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+				u32 vendorID, const char *manufacturer);
 
 #else
 
 static inline int
-rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN],
+				u32 vendorID, const char *manufacturer)
 {
 	return 0;
 }
 
 #endif
 
+/**
+ * rndis_bind_config - add RNDIS network link to a configuration
+ * @c: the configuration to support the network link
+ * @ethaddr: a buffer in which the ethernet address of the host side
+ *	side of the link was recorded
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gether_setup().  Caller is also responsible
+ * for calling @gether_cleanup() before module unload.
+ */
+static inline int rndis_bind_config(struct usb_configuration *c,
+				    u8 ethaddr[ETH_ALEN])
+{
+	return rndis_bind_config_vendor(c, ethaddr, 0, NULL);
+}
+
+
 #endif /* __U_ETHER_H */
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 6c23938d2711..5b3f5fffea92 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -94,17 +94,14 @@ struct gs_buf {
  * (and thus for each /dev/ node).
  */
 struct gs_port {
+	struct tty_port		port;
 	spinlock_t		port_lock;	/* guard port_* access */
 
 	struct gserial		*port_usb;
-	struct tty_struct	*port_tty;
 
-	unsigned		open_count;
 	bool			openclose;	/* open/close in progress */
 	u8			port_num;
 
-	wait_queue_head_t	close_wait;	/* wait for last close */
-
 	struct list_head	read_pool;
 	int read_started;
 	int read_allocated;
@@ -412,8 +409,8 @@ __acquires(&port->port_lock)
 			break;
 	}
 
-	if (do_tty_wake && port->port_tty)
-		tty_wakeup(port->port_tty);
+	if (do_tty_wake && port->port.tty)
+		tty_wakeup(port->port.tty);
 	return status;
 }
 
@@ -435,7 +432,7 @@ __acquires(&port->port_lock)
 		struct tty_struct	*tty;
 
 		/* no more rx if closed */
-		tty = port->port_tty;
+		tty = port->port.tty;
 		if (!tty)
 			break;
 
@@ -488,7 +485,7 @@ static void gs_rx_push(unsigned long _port)
 
 	/* hand any queued data to the tty */
 	spin_lock_irq(&port->port_lock);
-	tty = port->port_tty;
+	tty = port->port.tty;
 	while (!list_empty(queue)) {
 		struct usb_request	*req;
 
@@ -699,7 +696,7 @@ static int gs_start_io(struct gs_port *port)
 
 	/* unblock any pending writes into our circular buffer */
 	if (started) {
-		tty_wakeup(port->port_tty);
+		tty_wakeup(port->port.tty);
 	} else {
 		gs_free_requests(ep, head, &port->read_allocated);
 		gs_free_requests(port->port_usb->in, &port->write_pool,
@@ -734,9 +731,9 @@ static int gs_open(struct tty_struct *tty, struct file *file)
 			spin_lock_irq(&port->port_lock);
 
 			/* already open?  Great. */
-			if (port->open_count) {
+			if (port->port.count) {
 				status = 0;
-				port->open_count++;
+				port->port.count++;
 
 			/* currently opening/closing? wait ... */
 			} else if (port->openclose) {
@@ -793,9 +790,9 @@ static int gs_open(struct tty_struct *tty, struct file *file)
 	/* REVISIT maybe wait for "carrier detect" */
 
 	tty->driver_data = port;
-	port->port_tty = tty;
+	port->port.tty = tty;
 
-	port->open_count = 1;
+	port->port.count = 1;
 	port->openclose = false;
 
 	/* if connected, start the I/O stream */
@@ -837,11 +834,11 @@ static void gs_close(struct tty_struct *tty, struct file *file)
 
 	spin_lock_irq(&port->port_lock);
 
-	if (port->open_count != 1) {
-		if (port->open_count == 0)
+	if (port->port.count != 1) {
+		if (port->port.count == 0)
 			WARN_ON(1);
 		else
-			--port->open_count;
+			--port->port.count;
 		goto exit;
 	}
 
@@ -851,7 +848,7 @@ static void gs_close(struct tty_struct *tty, struct file *file)
 	 * and sleep if necessary
 	 */
 	port->openclose = true;
-	port->open_count = 0;
+	port->port.count = 0;
 
 	gser = port->port_usb;
 	if (gser && gser->disconnect)
@@ -879,14 +876,14 @@ static void gs_close(struct tty_struct *tty, struct file *file)
 		gs_buf_clear(&port->port_write_buf);
 
 	tty->driver_data = NULL;
-	port->port_tty = NULL;
+	port->port.tty = NULL;
 
 	port->openclose = false;
 
 	pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
 			port->port_num, tty, file);
 
-	wake_up_interruptible(&port->close_wait);
+	wake_up_interruptible(&port->port.close_wait);
 exit:
 	spin_unlock_irq(&port->port_lock);
 }
@@ -917,7 +914,7 @@ static int gs_put_char(struct tty_struct *tty, unsigned char ch)
 	unsigned long	flags;
 	int		status;
 
-	pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %p\n",
+	pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n",
 		port->port_num, tty, ch, __builtin_return_address(0));
 
 	spin_lock_irqsave(&port->port_lock, flags);
@@ -1025,7 +1022,7 @@ static const struct tty_operations gs_tty_ops = {
 
 static struct tty_driver *gs_tty_driver;
 
-static int __init
+static int
 gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
 {
 	struct gs_port	*port;
@@ -1034,8 +1031,8 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
 	if (port == NULL)
 		return -ENOMEM;
 
+	tty_port_init(&port->port);
 	spin_lock_init(&port->port_lock);
-	init_waitqueue_head(&port->close_wait);
 	init_waitqueue_head(&port->drain_wait);
 
 	tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
@@ -1071,7 +1068,7 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
  *
  * Returns negative errno or zero.
  */
-int __init gserial_setup(struct usb_gadget *g, unsigned count)
+int gserial_setup(struct usb_gadget *g, unsigned count)
 {
 	unsigned			i;
 	struct usb_cdc_line_coding	coding;
@@ -1155,7 +1152,7 @@ static int gs_closed(struct gs_port *port)
 	int cond;
 
 	spin_lock_irq(&port->port_lock);
-	cond = (port->open_count == 0) && !port->openclose;
+	cond = (port->port.count == 0) && !port->openclose;
 	spin_unlock_irq(&port->port_lock);
 	return cond;
 }
@@ -1194,7 +1191,7 @@ void gserial_cleanup(void)
 		tasklet_kill(&port->push);
 
 		/* wait for old opens to finish */
-		wait_event(port->close_wait, gs_closed(port));
+		wait_event(port->port.close_wait, gs_closed(port));
 
 		WARN_ON(port->port_usb != NULL);
 
@@ -1268,7 +1265,7 @@ int gserial_connect(struct gserial *gser, u8 port_num)
 	/* if it's already open, start I/O ... and notify the serial
 	 * protocol about open/close status (connect/disconnect).
 	 */
-	if (port->open_count) {
+	if (port->port.count) {
 		pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
 		gs_start_io(port);
 		if (gser->connect)
@@ -1315,10 +1312,10 @@ void gserial_disconnect(struct gserial *gser)
 
 	port->port_usb = NULL;
 	gser->ioport = NULL;
-	if (port->open_count > 0 || port->openclose) {
+	if (port->port.count > 0 || port->openclose) {
 		wake_up_interruptible(&port->drain_wait);
-		if (port->port_tty)
-			tty_hangup(port->port_tty);
+		if (port->port.tty)
+			tty_hangup(port->port.tty);
 	}
 	spin_unlock_irqrestore(&port->port_lock, flags);
 
@@ -1331,7 +1328,7 @@ void gserial_disconnect(struct gserial *gser)
 
 	/* finally, free any unused/unusable I/O buffers */
 	spin_lock_irqsave(&port->port_lock, flags);
-	if (port->open_count == 0 && !port->openclose)
+	if (port->port.count == 0 && !port->openclose)
 		gs_buf_free(&port->port_write_buf);
 	gs_free_requests(gser->out, &port->read_pool, NULL);
 	gs_free_requests(gser->out, &port->read_queue, NULL);
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 31d34832907e..12ad516ada77 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -72,7 +72,7 @@
 
 static const char longname[] = "Gadget Zero";
 
-unsigned buflen = 4096;
+unsigned buflen = 4096;		/* only used for bulk endpoints */
 module_param(buflen, uint, 0);
 
 /*
@@ -170,14 +170,17 @@ static struct usb_gadget_strings *dev_strings[] = {
 
 /*-------------------------------------------------------------------------*/
 
-struct usb_request *alloc_ep_req(struct usb_ep *ep)
+struct usb_request *alloc_ep_req(struct usb_ep *ep, int len)
 {
 	struct usb_request	*req;
 
 	req = usb_ep_alloc_request(ep, GFP_ATOMIC);
 	if (req) {
-		req->length = buflen;
-		req->buf = kmalloc(buflen, GFP_ATOMIC);
+		if (len)
+			req->length = len;
+		else
+			req->length = buflen;
+		req->buf = kmalloc(req->length, GFP_ATOMIC);
 		if (!req->buf) {
 			usb_ep_free_request(ep, req);
 			req = NULL;
@@ -206,10 +209,15 @@ static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
 }
 
 void disable_endpoints(struct usb_composite_dev *cdev,
-		struct usb_ep *in, struct usb_ep *out)
+		struct usb_ep *in, struct usb_ep *out,
+		struct usb_ep *iso_in, struct usb_ep *iso_out)
 {
 	disable_ep(cdev, in);
 	disable_ep(cdev, out);
+	if (iso_in)
+		disable_ep(cdev, iso_in);
+	if (iso_out)
+		disable_ep(cdev, iso_out);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -311,7 +319,6 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 		device_desc.bcdDevice = cpu_to_le16(0x9999);
 	}
 
-
 	INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname);
 
 	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index f788eb86707c..83e58df29fe3 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -65,7 +65,7 @@ config USB_EHCI_HCD
 
 config USB_EHCI_ROOT_HUB_TT
 	bool "Root Hub Transaction Translators"
-	depends on USB_EHCI_HCD
+	depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
 	---help---
 	  Some EHCI chips have vendor-specific extensions to integrate
 	  transaction translators, so that no OHCI or UHCI companion
@@ -77,7 +77,7 @@ config USB_EHCI_ROOT_HUB_TT
 
 config USB_EHCI_TT_NEWSCHED
 	bool "Improved Transaction Translator scheduling"
-	depends on USB_EHCI_HCD
+	depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
 	default y
 	---help---
 	  This changes the periodic scheduling code to fill more of the low
@@ -110,13 +110,14 @@ config USB_EHCI_BIG_ENDIAN_MMIO
 	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
 				    ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
 				    PPC_MPC512x || CPU_CAVIUM_OCTEON || \
-				    PMC_MSP || SPARC_LEON)
+				    PMC_MSP || SPARC_LEON || MIPS_SEAD3)
 	default y
 
 config USB_EHCI_BIG_ENDIAN_DESC
 	bool
 	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-				    PPC_MPC512x || PMC_MSP || SPARC_LEON)
+				    PPC_MPC512x || PMC_MSP || SPARC_LEON || \
+				    MIPS_SEAD3)
 	default y
 
 config XPS_USB_HCD_XILINX
@@ -152,7 +153,7 @@ config USB_EHCI_HCD_OMAP
 	bool "EHCI support for OMAP3 and later chips"
 	depends on USB_EHCI_HCD && ARCH_OMAP
 	default y
-	--- help ---
+	---help---
 	  Enables support for the on-chip EHCI controller on
 	  OMAP3 and later chips.
 
@@ -291,6 +292,7 @@ config USB_OHCI_HCD
 	depends on USB && USB_ARCH_HAS_OHCI
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
 	select USB_OTG_UTILS if ARCH_OMAP
+	select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008
 	---help---
 	  The Open Host Controller Interface (OHCI) is a standard for accessing
 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
@@ -373,10 +375,15 @@ config USB_OHCI_HCD_PCI
 	  If unsure, say Y.
 
 config USB_OHCI_HCD_SSB
-	bool "OHCI support for Broadcom SSB OHCI core"
+	bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
 	depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
+	select USB_HCD_SSB
+	select USB_OHCI_HCD_PLATFORM
 	default n
 	---help---
+	  This option is deprecated now and the driver was removed, use
+	  USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
+
 	  Support for the Sonics Silicon Backplane (SSB) attached
 	  Broadcom USB OHCI core.
 
@@ -638,3 +645,27 @@ config USB_OCTEON_OHCI
 config USB_OCTEON2_COMMON
 	bool
 	default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
+
+config USB_HCD_BCMA
+	tristate "BCMA usb host driver"
+	depends on BCMA && EXPERIMENTAL
+	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
+	help
+	  Enbale support for the EHCI and OCHI host controller on an bcma bus.
+	  It converts the bcma driver into two platform device drivers
+	  for ehci and ohci.
+
+	  If unsure, say N.
+
+config USB_HCD_SSB
+	tristate "SSB usb host driver"
+	depends on SSB && EXPERIMENTAL
+	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
+	help
+	  Enbale support for the EHCI and OCHI host controller on an bcma bus.
+	  It converts the bcma driver into two platform device drivers
+	  for ehci and ohci.
+
+	  If unsure, say N.
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 0982bcc140bd..9e0a89ced15c 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -41,3 +41,5 @@ obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
 obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
 obj-$(CONFIG_MIPS_ALCHEMY)	+= alchemy-common.o
+obj-$(CONFIG_USB_HCD_BCMA)	+= bcma-hcd.o
+obj-$(CONFIG_USB_HCD_SSB)	+= ssb-hcd.o
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
new file mode 100644
index 000000000000..443da21d73ca
--- /dev/null
+++ b/drivers/usb/host/bcma-hcd.c
@@ -0,0 +1,335 @@
+/*
+ * Broadcom specific Advanced Microcontroller Bus
+ * Broadcom USB-core driver (BCMA bus glue)
+ *
+ * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Based on ssb-ohci driver
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005-2011 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
+MODULE_LICENSE("GPL");
+
+struct bcma_hcd_device {
+	struct platform_device *ehci_dev;
+	struct platform_device *ohci_dev;
+};
+
+/* Wait for bitmask in a register to get set or cleared.
+ * timeout is in units of ten-microseconds.
+ */
+static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask,
+			  int timeout)
+{
+	int i;
+	u32 val;
+
+	for (i = 0; i < timeout; i++) {
+		val = bcma_read32(dev, reg);
+		if ((val & bitmask) == bitmask)
+			return 0;
+		udelay(10);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void __devinit bcma_hcd_4716wa(struct bcma_device *dev)
+{
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+	/* Work around for 4716 failures. */
+	if (dev->bus->chipinfo.id == 0x4716) {
+		u32 tmp;
+
+		tmp = bcma_cpu_clock(&dev->bus->drv_mips);
+		if (tmp >= 480000000)
+			tmp = 0x1846b; /* set CDR to 0x11(fast) */
+		else if (tmp == 453000000)
+			tmp = 0x1046b; /* set CDR to 0x10(slow) */
+		else
+			tmp = 0;
+
+		/* Change Shim mdio control reg to fix host not acking at
+		 * high frequencies
+		 */
+		if (tmp) {
+			bcma_write32(dev, 0x524, 0x1); /* write sel to enable */
+			udelay(500);
+
+			bcma_write32(dev, 0x524, tmp);
+			udelay(500);
+			bcma_write32(dev, 0x524, 0x4ab);
+			udelay(500);
+			bcma_read32(dev, 0x528);
+			bcma_write32(dev, 0x528, 0x80000000);
+		}
+	}
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+}
+
+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
+static void __devinit bcma_hcd_init_chip(struct bcma_device *dev)
+{
+	u32 tmp;
+
+	/*
+	 * USB 2.0 special considerations:
+	 *
+	 * 1. Since the core supports both OHCI and EHCI functions, it must
+	 *    only be reset once.
+	 *
+	 * 2. In addition to the standard SI reset sequence, the Host Control
+	 *    Register must be programmed to bring the USB core and various
+	 *    phy components out of reset.
+	 */
+	if (!bcma_core_is_enabled(dev)) {
+		bcma_core_enable(dev, 0);
+		mdelay(10);
+		if (dev->id.rev >= 5) {
+			/* Enable Misc PLL */
+			tmp = bcma_read32(dev, 0x1e0);
+			tmp |= 0x100;
+			bcma_write32(dev, 0x1e0, tmp);
+			if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100))
+				printk(KERN_EMERG "Failed to enable misc PPL!\n");
+
+			/* Take out of resets */
+			bcma_write32(dev, 0x200, 0x4ff);
+			udelay(25);
+			bcma_write32(dev, 0x200, 0x6ff);
+			udelay(25);
+
+			/* Make sure digital and AFE are locked in USB PHY */
+			bcma_write32(dev, 0x524, 0x6b);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0xab);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0x2b);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+			udelay(50);
+			bcma_write32(dev, 0x524, 0x10ab);
+			udelay(50);
+			tmp = bcma_read32(dev, 0x524);
+
+			if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) {
+				tmp = bcma_read32(dev, 0x528);
+				printk(KERN_EMERG
+				       "USB20H mdio_rddata 0x%08x\n", tmp);
+			}
+			bcma_write32(dev, 0x528, 0x80000000);
+			tmp = bcma_read32(dev, 0x314);
+			udelay(265);
+			bcma_write32(dev, 0x200, 0x7ff);
+			udelay(10);
+
+			/* Take USB and HSIC out of non-driving modes */
+			bcma_write32(dev, 0x510, 0);
+		} else {
+			bcma_write32(dev, 0x200, 0x7ff);
+
+			udelay(1);
+		}
+
+		bcma_hcd_4716wa(dev);
+	}
+}
+
+static const struct usb_ehci_pdata ehci_pdata = {
+};
+
+static const struct usb_ohci_pdata ohci_pdata = {
+};
+
+static struct platform_device * __devinit
+bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
+{
+	struct platform_device *hci_dev;
+	struct resource hci_res[2];
+	int ret = -ENOMEM;
+
+	memset(hci_res, 0, sizeof(hci_res));
+
+	hci_res[0].start = addr;
+	hci_res[0].end = hci_res[0].start + 0x1000 - 1;
+	hci_res[0].flags = IORESOURCE_MEM;
+
+	hci_res[1].start = dev->irq;
+	hci_res[1].flags = IORESOURCE_IRQ;
+
+	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
+					"ehci-platform" , 0);
+	if (!hci_dev)
+		return NULL;
+
+	hci_dev->dev.parent = &dev->dev;
+	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
+
+	ret = platform_device_add_resources(hci_dev, hci_res,
+					    ARRAY_SIZE(hci_res));
+	if (ret)
+		goto err_alloc;
+	if (ohci)
+		ret = platform_device_add_data(hci_dev, &ohci_pdata,
+					       sizeof(ohci_pdata));
+	else
+		ret = platform_device_add_data(hci_dev, &ehci_pdata,
+					       sizeof(ehci_pdata));
+	if (ret)
+		goto err_alloc;
+	ret = platform_device_add(hci_dev);
+	if (ret)
+		goto err_alloc;
+
+	return hci_dev;
+
+err_alloc:
+	platform_device_put(hci_dev);
+	return ERR_PTR(ret);
+}
+
+static int __devinit bcma_hcd_probe(struct bcma_device *dev)
+{
+	int err;
+	u16 chipid_top;
+	u32 ohci_addr;
+	struct bcma_hcd_device *usb_dev;
+	struct bcma_chipinfo *chipinfo;
+
+	chipinfo = &dev->bus->chipinfo;
+	/* USBcores are only connected on embedded devices. */
+	chipid_top = (chipinfo->id & 0xFF00);
+	if (chipid_top != 0x4700 && chipid_top != 0x5300)
+		return -ENODEV;
+
+	/* TODO: Probably need checks here; is the core connected? */
+
+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+		return -EOPNOTSUPP;
+
+	usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
+	if (!usb_dev)
+		return -ENOMEM;
+
+	bcma_hcd_init_chip(dev);
+
+	/* In AI chips EHCI is addrspace 0, OHCI is 1 */
+	ohci_addr = dev->addr1;
+	if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
+	    && chipinfo->rev == 0)
+		ohci_addr = 0x18009000;
+
+	usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
+	if (IS_ERR(usb_dev->ohci_dev)) {
+		err = PTR_ERR(usb_dev->ohci_dev);
+		goto err_free_usb_dev;
+	}
+
+	usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
+	if (IS_ERR(usb_dev->ehci_dev)) {
+		err = PTR_ERR(usb_dev->ehci_dev);
+		goto err_unregister_ohci_dev;
+	}
+
+	bcma_set_drvdata(dev, usb_dev);
+	return 0;
+
+err_unregister_ohci_dev:
+	platform_device_unregister(usb_dev->ohci_dev);
+err_free_usb_dev:
+	kfree(usb_dev);
+	return err;
+}
+
+static void __devexit bcma_hcd_remove(struct bcma_device *dev)
+{
+	struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
+	struct platform_device *ohci_dev = usb_dev->ohci_dev;
+	struct platform_device *ehci_dev = usb_dev->ehci_dev;
+
+	if (ohci_dev)
+		platform_device_unregister(ohci_dev);
+	if (ehci_dev)
+		platform_device_unregister(ehci_dev);
+
+	bcma_core_disable(dev, 0);
+}
+
+static void bcma_hcd_shutdown(struct bcma_device *dev)
+{
+	bcma_core_disable(dev, 0);
+}
+
+#ifdef CONFIG_PM
+
+static int bcma_hcd_suspend(struct bcma_device *dev)
+{
+	bcma_core_disable(dev, 0);
+
+	return 0;
+}
+
+static int bcma_hcd_resume(struct bcma_device *dev)
+{
+	bcma_core_enable(dev, 0);
+
+	return 0;
+}
+
+#else /* !CONFIG_PM */
+#define bcma_hcd_suspend	NULL
+#define bcma_hcd_resume	NULL
+#endif /* CONFIG_PM */
+
+static const struct bcma_device_id bcma_hcd_table[] __devinitconst = {
+	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
+	BCMA_CORETABLE_END
+};
+MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
+
+static struct bcma_driver bcma_hcd_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= bcma_hcd_table,
+	.probe		= bcma_hcd_probe,
+	.remove		= __devexit_p(bcma_hcd_remove),
+	.shutdown	= bcma_hcd_shutdown,
+	.suspend	= bcma_hcd_suspend,
+	.resume		= bcma_hcd_resume,
+};
+
+static int __init bcma_hcd_init(void)
+{
+	return bcma_driver_register(&bcma_hcd_driver);
+}
+module_init(bcma_hcd_init);
+
+static void __exit bcma_hcd_exit(void)
+{
+	bcma_driver_unregister(&bcma_hcd_driver);
+}
+module_exit(bcma_hcd_exit);
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 680e1a31fb87..7561966fbdc4 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -1025,10 +1025,8 @@ static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf,
 		if (strict_strtoul(buf + 5, 16, &hird))
 			return -EINVAL;
 		printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird);
-		temp = ehci_readl(ehci, &ehci->regs->command);
-		temp &= ~CMD_HIRD;
-		temp |= hird << 24;
-		ehci_writel(ehci, temp, &ehci->regs->command);
+		ehci->command = (ehci->command & ~CMD_HIRD) | (hird << 24);
+		ehci_writel(ehci, ehci->command, &ehci->regs->command);
 	} else if (strncmp(buf, "disable", 7) == 0) {
 		if (strict_strtoul(buf + 8, 10, &port))
 			return -EINVAL;
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index d0a84bd3f3eb..43362577b54a 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -1,6 +1,6 @@
 /*
  * Copyright 2005-2009 MontaVista Software, Inc.
- * Copyright 2008      Freescale Semiconductor, Inc.
+ * Copyright 2008,2012      Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -150,8 +150,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 			retval = otg_set_host(ehci->transceiver->otg,
 					      &ehci_to_hcd(ehci)->self);
 			if (retval) {
-				if (ehci->transceiver)
-					put_device(ehci->transceiver->dev);
+				usb_put_transceiver(ehci->transceiver);
 				goto err4;
 			}
 		} else {
@@ -195,7 +194,7 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
 
 	if (ehci->transceiver) {
 		otg_set_host(ehci->transceiver->otg, NULL);
-		put_device(ehci->transceiver->dev);
+		usb_put_transceiver(ehci->transceiver);
 	}
 
 	usb_remove_hcd(hcd);
@@ -211,22 +210,32 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
 	usb_put_hcd(hcd);
 }
 
-static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
+static void ehci_fsl_setup_phy(struct usb_hcd *hcd,
 			       enum fsl_usb2_phy_modes phy_mode,
 			       unsigned int port_offset)
 {
-	u32 portsc;
-	struct usb_hcd *hcd = ehci_to_hcd(ehci);
+	u32 portsc, temp;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	void __iomem *non_ehci = hcd->regs;
-	struct fsl_usb2_platform_data *pdata;
+	struct device *dev = hcd->self.controller;
+	struct fsl_usb2_platform_data *pdata = dev->platform_data;
 
-	pdata = hcd->self.controller->platform_data;
+	if (pdata->controller_ver < 0) {
+		dev_warn(hcd->self.controller, "Could not get controller version\n");
+		return;
+	}
 
 	portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
 	portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
 
 	switch (phy_mode) {
 	case FSL_USB2_PHY_ULPI:
+		if (pdata->controller_ver) {
+			/* controller version 1.6 or above */
+			temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
+			out_be32(non_ehci + FSL_SOC_USB_CTRL, temp |
+				USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL);
+		}
 		portsc |= PORT_PTS_ULPI;
 		break;
 	case FSL_USB2_PHY_SERIAL:
@@ -236,6 +245,14 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
 		portsc |= PORT_PTS_PTW;
 		/* fall through */
 	case FSL_USB2_PHY_UTMI:
+		if (pdata->controller_ver) {
+			/* controller version 1.6 or above */
+			temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
+			out_be32(non_ehci + FSL_SOC_USB_CTRL, temp |
+				UTMI_PHY_EN | USB_CTRL_USB_EN);
+			mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
+						become stable - 10ms*/
+		}
 		/* enable UTMI PHY */
 		if (pdata->have_sysif_regs)
 			setbits32(non_ehci + FSL_SOC_USB_CTRL,
@@ -276,7 +293,7 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 
 	if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
 			(pdata->operating_mode == FSL_USB2_DR_OTG))
-		ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);
+		ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0);
 
 	if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
 		unsigned int chip, rev, svr;
@@ -290,9 +307,9 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 			ehci->has_fsl_port_bug = 1;
 
 		if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
-			ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0);
+			ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0);
 		if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
-			ehci_fsl_setup_phy(ehci, pdata->phy_mode, 1);
+			ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1);
 	}
 
 	if (pdata->have_sysif_regs) {
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index 863fb0c080d7..88403684d10b 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -1,4 +1,4 @@
-/* Copyright (C) 2005-2010 Freescale Semiconductor, Inc.
+/* Copyright (C) 2005-2010,2012 Freescale Semiconductor, Inc.
  * Copyright (c) 2005 MontaVista Software
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -50,4 +50,15 @@
 #define CTRL_UTMI_PHY_EN	(1<<9)
 #define CTRL_PHY_CLK_VALID	(1 << 17)
 #define SNOOP_SIZE_2GB		0x1e
+
+/* control Register Bit Masks */
+#define ULPI_INT_EN             (1<<0)
+#define WU_INT_EN               (1<<1)
+#define USB_CTRL_USB_EN         (1<<2)
+#define LINE_STATE_FILTER__EN   (1<<3)
+#define KEEP_OTG_ON             (1<<4)
+#define OTG_PORT                (1<<5)
+#define PLL_RESET               (1<<8)
+#define UTMI_PHY_EN             (1<<9)
+#define ULPI_PHY_CLK_SEL        (1<<10)
 #endif				/* _EHCI_FSL_H */
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 4a3bc5b7a06f..b100f5f9f4b6 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -226,8 +226,13 @@ static int ehci_halt (struct ehci_hcd *ehci)
 	if ((temp & STS_HALT) != 0)
 		return 0;
 
+	/*
+	 * This routine gets called during probe before ehci->command
+	 * has been initialized, so we can't rely on its value.
+	 */
+	ehci->command &= ~CMD_RUN;
 	temp = ehci_readl(ehci, &ehci->regs->command);
-	temp &= ~CMD_RUN;
+	temp &= ~(CMD_RUN | CMD_IAAD);
 	ehci_writel(ehci, temp, &ehci->regs->command);
 	return handshake (ehci, &ehci->regs->status,
 			  STS_HALT, STS_HALT, 16 * 125);
@@ -363,16 +368,14 @@ static void ehci_quiesce (struct ehci_hcd *ehci)
 #endif
 
 	/* wait for any schedule enables/disables to take effect */
-	temp = ehci_readl(ehci, &ehci->regs->command) << 10;
-	temp &= STS_ASS | STS_PSS;
+	temp = (ehci->command << 10) & (STS_ASS | STS_PSS);
 	if (handshake_on_error_set_halt(ehci, &ehci->regs->status,
 					STS_ASS | STS_PSS, temp, 16 * 125))
 		return;
 
 	/* then disable anything that's still active */
-	temp = ehci_readl(ehci, &ehci->regs->command);
-	temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE);
-	ehci_writel(ehci, temp, &ehci->regs->command);
+	ehci->command &= ~(CMD_ASE | CMD_PSE);
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
 
 	/* hardware can take 16 microframes to turn off ... */
 	handshake_on_error_set_halt(ehci, &ehci->regs->status,
@@ -417,9 +420,6 @@ static void ehci_iaa_watchdog(unsigned long param)
 		 * CMD_IAAD when it sets STS_IAA.)
 		 */
 		cmd = ehci_readl(ehci, &ehci->regs->command);
-		if (cmd & CMD_IAAD)
-			ehci_writel(ehci, cmd & ~CMD_IAAD,
-					&ehci->regs->command);
 
 		/* If IAA is set here it either legitimately triggered
 		 * before we cleared IAAD above (but _way_ late, so we'll
@@ -894,11 +894,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 	/* complete the unlinking of some qh [4.15.2.3] */
 	if (status & STS_IAA) {
 		/* guard against (alleged) silicon errata */
-		if (cmd & CMD_IAAD) {
-			ehci_writel(ehci, cmd & ~CMD_IAAD,
-					&ehci->regs->command);
+		if (cmd & CMD_IAAD)
 			ehci_dbg(ehci, "IAA with IAAD still set?\n");
-		}
 		if (ehci->reclaim) {
 			COUNT(ehci->stats.reclaim);
 			end_unlink_async(ehci);
@@ -1248,6 +1245,13 @@ static int ehci_get_frame (struct usb_hcd *hcd)
 }
 
 /*-------------------------------------------------------------------------*/
+/*
+ * The EHCI in ChipIdea HDRC cannot be a separate module or device,
+ * because its registers (and irq) are shared between host/gadget/otg
+ * functions  and in order to facilitate role switching we cannot
+ * give the ehci driver exclusive access to those.
+ */
+#ifndef CHIPIDEA_EHCI
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR (DRIVER_AUTHOR);
@@ -1378,6 +1382,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_ls1x_driver
 #endif
 
+#ifdef CONFIG_MIPS_SEAD3
+#include "ehci-sead3.c"
+#define	PLATFORM_DRIVER		ehci_hcd_sead3_driver
+#endif
+
 #ifdef CONFIG_USB_EHCI_HCD_PLATFORM
 #include "ehci-platform.c"
 #define PLATFORM_DRIVER		ehci_platform_driver
@@ -1501,3 +1510,4 @@ static void __exit ehci_hcd_cleanup(void)
 }
 module_exit(ehci_hcd_cleanup);
 
+#endif /* CHIPIDEA_EHCI */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 38fe07623152..fc9e7cc6ac9b 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -233,7 +233,6 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	/* stop schedules, clean any completed work */
 	if (ehci->rh_state == EHCI_RH_RUNNING)
 		ehci_quiesce (ehci);
-	ehci->command = ehci_readl(ehci, &ehci->regs->command);
 	ehci_work(ehci);
 
 	/* Unlike other USB host controller types, EHCI doesn't have
@@ -374,6 +373,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
 
 	/* restore CMD_RUN, framelist size, and irq threshold */
+	ehci->command |= CMD_RUN;
 	ehci_writel(ehci, ehci->command, &ehci->regs->command);
 	ehci->rh_state = EHCI_RH_RUNNING;
 
@@ -531,7 +531,8 @@ static int check_reset_complete (
 		if (ehci->has_amcc_usb23)
 			set_ohci_hcfs(ehci, 1);
 	} else {
-		ehci_dbg (ehci, "port %d high speed\n", index + 1);
+		ehci_dbg(ehci, "port %d reset complete, port enabled\n",
+			index + 1);
 		/* ensure 440EPx ohci controller state is suspended */
 		if (ehci->has_amcc_usb23)
 			set_ohci_hcfs(ehci, 0);
@@ -699,6 +700,7 @@ static int ehci_hub_control (
 			goto error;
 		wIndex--;
 		temp = ehci_readl(ehci, status_reg);
+		temp &= ~PORT_RWC_BITS;
 
 		/*
 		 * Even if OWNER is set, so the port is owned by the
@@ -712,8 +714,7 @@ static int ehci_hub_control (
 			ehci_writel(ehci, temp & ~PORT_PE, status_reg);
 			break;
 		case USB_PORT_FEAT_C_ENABLE:
-			ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
-					status_reg);
+			ehci_writel(ehci, temp | PORT_PEC, status_reg);
 			break;
 		case USB_PORT_FEAT_SUSPEND:
 			if (temp & PORT_RESET)
@@ -742,7 +743,7 @@ static int ehci_hub_control (
 				spin_lock_irqsave(&ehci->lock, flags);
 			}
 			/* resume signaling for 20 msec */
-			temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+			temp &= ~PORT_WAKE_BITS;
 			ehci_writel(ehci, temp | PORT_RESUME, status_reg);
 			ehci->reset_done[wIndex] = jiffies
 					+ msecs_to_jiffies(20);
@@ -752,9 +753,8 @@ static int ehci_hub_control (
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (HCS_PPC (ehci->hcs_params))
-				ehci_writel(ehci,
-					  temp & ~(PORT_RWC_BITS | PORT_POWER),
-					  status_reg);
+				ehci_writel(ehci, temp & ~PORT_POWER,
+						status_reg);
 			break;
 		case USB_PORT_FEAT_C_CONNECTION:
 			if (ehci->has_lpm) {
@@ -762,12 +762,10 @@ static int ehci_hub_control (
 				temp &= ~PORT_LPM;
 				temp &= ~PORT_DEV_ADDR;
 			}
-			ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
-					status_reg);
+			ehci_writel(ehci, temp | PORT_CSC, status_reg);
 			break;
 		case USB_PORT_FEAT_C_OVER_CURRENT:
-			ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
-					status_reg);
+			ehci_writel(ehci, temp | PORT_OCC, status_reg);
 			break;
 		case USB_PORT_FEAT_C_RESET:
 			/* GetPortStatus clears reset */
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 5c78f9e71466..a44294d13494 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -242,15 +242,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
 	ehci_reset(omap_ehci);
 
-	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
-	if (ret) {
-		dev_err(dev, "failed to add hcd with err %d\n", ret);
-		goto err_add_hcd;
-	}
-
-	/* root ports should always stay powered */
-	ehci_port_power(omap_ehci, 1);
-
 	if (pdata->phy_reset) {
 		/* Hold the PHY in RESET for enough time till
 		 * PHY is settled and ready
@@ -258,12 +249,21 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 		udelay(10);
 
 		if (gpio_is_valid(pdata->reset_gpio_port[0]))
-			gpio_set_value(pdata->reset_gpio_port[0], 1);
+			gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1);
 
 		if (gpio_is_valid(pdata->reset_gpio_port[1]))
-			gpio_set_value(pdata->reset_gpio_port[1], 1);
+			gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
 	}
 
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (ret) {
+		dev_err(dev, "failed to add hcd with err %d\n", ret);
+		goto err_add_hcd;
+	}
+
+	/* root ports should always stay powered */
+	ehci_port_power(omap_ehci, 1);
+
 	return 0;
 
 err_add_hcd:
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index fe8dc069164e..bc94d7bf072d 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -368,7 +368,9 @@ static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev)
 {
 	return pdev->class == PCI_CLASS_SERIAL_USB_EHCI &&
 		pdev->vendor == PCI_VENDOR_ID_INTEL &&
-		pdev->device == 0x1E26;
+		(pdev->device == 0x1E26 ||
+		 pdev->device == 0x8C2D ||
+		 pdev->device == 0x8C26);
 }
 
 static void ehci_enable_xhci_companion(void)
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index d238b4e24bb6..dfe881a34ae2 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -75,8 +75,6 @@ static const struct hc_driver ehci_platform_hc_driver = {
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
 
-	.update_device		= ehci_update_device,
-
 	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
@@ -94,12 +92,12 @@ static int __devinit ehci_platform_probe(struct platform_device *dev)
 
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
-		pr_err("no irq provieded");
+		pr_err("no irq provided");
 		return irq;
 	}
 	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (!res_mem) {
-		pr_err("no memory recourse provieded");
+		pr_err("no memory recourse provided");
 		return -ENXIO;
 	}
 
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 36ca5077cdf7..4378bf72bbac 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -943,7 +943,8 @@ qh_make (
 		}
 		break;
 	default:
-		dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed);
+		ehci_dbg(ehci, "bogus dev %p speed %d\n", urb->dev,
+			urb->dev->speed);
 done:
 		qh_put (qh);
 		return NULL;
@@ -981,14 +982,12 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	head = ehci->async;
 	timer_action_done (ehci, TIMER_ASYNC_OFF);
 	if (!head->qh_next.qh) {
-		u32	cmd = ehci_readl(ehci, &ehci->regs->command);
-
-		if (!(cmd & CMD_ASE)) {
+		if (!(ehci->command & CMD_ASE)) {
 			/* in case a clear of CMD_ASE didn't take yet */
 			(void)handshake(ehci, &ehci->regs->status,
 					STS_ASS, 0, 150);
-			cmd |= CMD_ASE;
-			ehci_writel(ehci, cmd, &ehci->regs->command);
+			ehci->command |= CMD_ASE;
+			ehci_writel(ehci, ehci->command, &ehci->regs->command);
 			/* posted write need not be known to HC yet ... */
 		}
 	}
@@ -1204,7 +1203,6 @@ static void end_unlink_async (struct ehci_hcd *ehci)
 
 static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 {
-	int		cmd = ehci_readl(ehci, &ehci->regs->command);
 	struct ehci_qh	*prev;
 
 #ifdef DEBUG
@@ -1222,8 +1220,8 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		if (ehci->rh_state != EHCI_RH_HALTED
 				&& !ehci->reclaim) {
 			/* ... and CMD_IAAD clear */
-			ehci_writel(ehci, cmd & ~CMD_ASE,
-				    &ehci->regs->command);
+			ehci->command &= ~CMD_ASE;
+			ehci_writel(ehci, ehci->command, &ehci->regs->command);
 			wmb ();
 			// handshake later, if we need to
 			timer_action_done (ehci, TIMER_ASYNC_OFF);
@@ -1253,8 +1251,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		return;
 	}
 
-	cmd |= CMD_IAAD;
-	ehci_writel(ehci, cmd, &ehci->regs->command);
+	ehci_writel(ehci, ehci->command | CMD_IAAD, &ehci->regs->command);
 	(void)ehci_readl(ehci, &ehci->regs->command);
 	iaa_watchdog_start(ehci);
 }
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index f098e2a291a0..c474cec064e4 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -232,6 +232,8 @@ static int s5p_ehci_suspend(struct device *dev)
 	if (pdata && pdata->phy_exit)
 		pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
 
+	clk_disable(s5p_ehci->clk);
+
 	return rc;
 }
 
@@ -243,6 +245,8 @@ static int s5p_ehci_resume(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
 
+	clk_enable(s5p_ehci->clk);
+
 	if (pdata && pdata->phy_init)
 		pdata->phy_init(pdev, S5P_USB_PHY_HOST);
 
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a60679cbbf85..33182c6d1ff9 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -481,7 +481,6 @@ static int tt_no_collision (
 
 static int enable_periodic (struct ehci_hcd *ehci)
 {
-	u32	cmd;
 	int	status;
 
 	if (ehci->periodic_sched++)
@@ -497,8 +496,8 @@ static int enable_periodic (struct ehci_hcd *ehci)
 		return status;
 	}
 
-	cmd = ehci_readl(ehci, &ehci->regs->command) | CMD_PSE;
-	ehci_writel(ehci, cmd, &ehci->regs->command);
+	ehci->command |= CMD_PSE;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
 	/* posted write ... PSS happens later */
 
 	/* make sure ehci_work scans these */
@@ -511,7 +510,6 @@ static int enable_periodic (struct ehci_hcd *ehci)
 
 static int disable_periodic (struct ehci_hcd *ehci)
 {
-	u32	cmd;
 	int	status;
 
 	if (--ehci->periodic_sched)
@@ -537,8 +535,8 @@ static int disable_periodic (struct ehci_hcd *ehci)
 		return status;
 	}
 
-	cmd = ehci_readl(ehci, &ehci->regs->command) & ~CMD_PSE;
-	ehci_writel(ehci, cmd, &ehci->regs->command);
+	ehci->command &= ~CMD_PSE;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
 	/* posted write ... */
 
 	free_cached_lists(ehci);
@@ -1333,34 +1331,36 @@ sitd_slot_ok (
 	if (mask & ~0xffff)
 		return 0;
 
+	/* check bandwidth */
+	uframe %= period_uframes;
+	frame = uframe >> 3;
+
+#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
+	/* The tt's fullspeed bus bandwidth must be available.
+	 * tt_available scheduling guarantees 10+% for control/bulk.
+	 */
+	uf = uframe & 7;
+	if (!tt_available(ehci, period_uframes >> 3,
+			stream->udev, frame, uf, stream->tt_usecs))
+		return 0;
+#else
+	/* tt must be idle for start(s), any gap, and csplit.
+	 * assume scheduling slop leaves 10+% for control/bulk.
+	 */
+	if (!tt_no_collision(ehci, period_uframes >> 3,
+			stream->udev, frame, mask))
+		return 0;
+#endif
+
 	/* this multi-pass logic is simple, but performance may
 	 * suffer when the schedule data isn't cached.
 	 */
-
-	/* check bandwidth */
-	uframe %= period_uframes;
 	do {
 		u32		max_used;
 
 		frame = uframe >> 3;
 		uf = uframe & 7;
 
-#ifdef CONFIG_USB_EHCI_TT_NEWSCHED
-		/* The tt's fullspeed bus bandwidth must be available.
-		 * tt_available scheduling guarantees 10+% for control/bulk.
-		 */
-		if (!tt_available (ehci, period_uframes << 3,
-				stream->udev, frame, uf, stream->tt_usecs))
-			return 0;
-#else
-		/* tt must be idle for start(s), any gap, and csplit.
-		 * assume scheduling slop leaves 10+% for control/bulk.
-		 */
-		if (!tt_no_collision (ehci, period_uframes << 3,
-				stream->udev, frame, mask))
-			return 0;
-#endif
-
 		/* check starts (OUT uses more than one) */
 		max_used = ehci->uframe_periodic_max - stream->usecs;
 		for (tmp = stream->raw_mask & 0xff; tmp; tmp >>= 1, uf++) {
@@ -2358,7 +2358,8 @@ restart:
 				 * in the previous frame for completions.
 				 */
 				if (q.fstn->hw_prev != EHCI_LIST_END(ehci)) {
-					dbg ("ignoring completions from FSTNs");
+					ehci_dbg(ehci,
+						"ignoring completions from FSTNs\n");
 				}
 				type = Q_NEXT_TYPE(ehci, q.fstn->hw_next);
 				q = q.fstn->fstn_next;
@@ -2441,7 +2442,7 @@ restart:
 				q = *q_p;
 				break;
 			default:
-				dbg ("corrupt type %d frame %d shadow %p",
+				ehci_dbg(ehci, "corrupt type %d frame %d shadow %p\n",
 					type, frame, q.ptr);
 				// BUG ();
 				q.ptr = NULL;
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
new file mode 100644
index 000000000000..cc199e87a7a9
--- /dev/null
+++ b/drivers/usb/host/ehci-sead3.c
@@ -0,0 +1,266 @@
+/*
+ * MIPS CI13320A EHCI Host Controller driver
+ * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com>
+ *
+ * Copyright (C) 2012 MIPS Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+
+static int ehci_sead3_setup(struct usb_hcd *hcd)
+{
+	int ret;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	ehci->caps = hcd->regs + 0x100;
+
+#ifdef __BIG_ENDIAN
+	ehci->big_endian_mmio = 1;
+	ehci->big_endian_desc = 1;
+#endif
+
+	ret = ehci_setup(hcd);
+	if (ret)
+		return ret;
+
+	ehci->need_io_watchdog = 0;
+
+	/* Set burst length to 16 words. */
+	ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]);
+
+	return ret;
+}
+
+const struct hc_driver ehci_sead3_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "SEAD-3 EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 *
+	 */
+	.reset			= ehci_sead3_setup,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		return -ENOMEM;
+	}
+	hcd = usb_create_hcd(&ehci_sead3_hc_driver, &pdev->dev, "SEAD-3");
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		pr_debug("request_mem_region failed");
+		ret = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		pr_debug("ioremap failed");
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	/* Root hub has integrated TT. */
+	hcd->has_tt = 1;
+
+	ret = usb_add_hcd(hcd, pdev->resource[1].start,
+			  IRQF_SHARED);
+	if (ret == 0) {
+		platform_set_drvdata(pdev, hcd);
+		return ret;
+	}
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ehci_hcd_sead3_drv_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	unsigned long flags;
+	int rc = 0;
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(20);
+
+	/* Root hub was already suspended. Disable irq emission and
+	 * mark HW unaccessible.  The PM and USB cores make sure that
+	 * the root hub is either suspended or stopped.
+	 */
+	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
+	spin_lock_irqsave(&ehci->lock, flags);
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
+
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	spin_unlock_irqrestore(&ehci->lock, flags);
+
+	/* could save FLADJ in case of Vaux power loss
+	 * ... we'd only use it to handle clock skew
+	 */
+
+	return rc;
+}
+
+static int ehci_hcd_sead3_drv_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	/* maybe restore FLADJ. */
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(100);
+
+	/* Mark hardware accessible again as we are out of D3 state by now */
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* If CF is still set, we maintained PCI Vaux power.
+	 * Just undo the effect of ehci_pci_suspend().
+	 */
+	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+		int	mask = INTR_MASK;
+
+		ehci_prepare_ports_for_controller_resume(ehci);
+		if (!hcd->self.root_hub->do_remote_wakeup)
+			mask &= ~STS_PCD;
+		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+		ehci_readl(ehci, &ehci->regs->intr_enable);
+		return 0;
+	}
+
+	ehci_dbg(ehci, "lost power, restarting\n");
+	usb_root_hub_lost_power(hcd->self.root_hub);
+
+	/* Else reset, to cope with power loss or flush-to-storage
+	 * style "resume" having let BIOS kick in during reboot.
+	 */
+	(void) ehci_halt(ehci);
+	(void) ehci_reset(ehci);
+
+	/* emptying the schedule aborts any urbs */
+	spin_lock_irq(&ehci->lock);
+	if (ehci->reclaim)
+		end_unlink_async(ehci);
+	ehci_work(ehci);
+	spin_unlock_irq(&ehci->lock);
+
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+
+	/* here we "know" root ports should always stay powered */
+	ehci_port_power(ehci, 1);
+
+	ehci->rh_state = EHCI_RH_SUSPENDED;
+
+	return 0;
+}
+
+static const struct dev_pm_ops sead3_ehci_pmops = {
+	.suspend	= ehci_hcd_sead3_drv_suspend,
+	.resume		= ehci_hcd_sead3_drv_resume,
+};
+
+#define SEAD3_EHCI_PMOPS (&sead3_ehci_pmops)
+
+#else
+#define SEAD3_EHCI_PMOPS NULL
+#endif
+
+static struct platform_driver ehci_hcd_sead3_driver = {
+	.probe		= ehci_hcd_sead3_drv_probe,
+	.remove		= ehci_hcd_sead3_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name	= "sead3-ehci",
+		.owner	= THIS_MODULE,
+		.pm	= SEAD3_EHCI_PMOPS,
+	}
+};
+
+MODULE_ALIAS("platform:sead3-ehci");
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index 9d9cf47d80da..ca819cdd0c5e 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -11,6 +11,7 @@
  */
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/platform_data/ehci-sh.h>
 
 struct ehci_sh_priv {
 	struct clk *iclk, *fclk;
@@ -100,6 +101,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev)
 	const struct hc_driver *driver = &ehci_sh_hc_driver;
 	struct resource *res;
 	struct ehci_sh_priv *priv;
+	struct ehci_sh_platdata *pdata;
 	struct usb_hcd *hcd;
 	int irq, ret;
 
@@ -124,6 +126,9 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev)
 		goto fail_create_hcd;
 	}
 
+	if (pdev->dev.platform_data != NULL)
+		pdata = pdev->dev.platform_data;
+
 	/* initialize hcd */
 	hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
 			     dev_name(&pdev->dev));
@@ -168,6 +173,9 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev)
 	clk_enable(priv->fclk);
 	clk_enable(priv->iclk);
 
+	if (pdata && pdata->phy_init)
+		pdata->phy_init();
+
 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to add hcd");
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 6e928559169c..37ba8c8d2fd0 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -13,6 +13,7 @@
 
 #include <linux/clk.h>
 #include <linux/jiffies.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 
@@ -25,12 +26,12 @@ struct spear_ehci {
 
 static void spear_start_ehci(struct spear_ehci *ehci)
 {
-	clk_enable(ehci->clk);
+	clk_prepare_enable(ehci->clk);
 }
 
 static void spear_stop_ehci(struct spear_ehci *ehci)
 {
-	clk_disable(ehci->clk);
+	clk_disable_unprepare(ehci->clk);
 }
 
 static int ehci_spear_setup(struct usb_hcd *hcd)
@@ -168,6 +169,8 @@ static int ehci_spear_drv_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
 		ehci_spear_drv_resume);
 
+static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32);
+
 static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd ;
@@ -175,12 +178,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct clk *usbh_clk;
 	const struct hc_driver *driver = &ehci_spear_hc_driver;
-	int *pdata = pdev->dev.platform_data;
 	int irq, retval;
 	char clk_name[20] = "usbh_clk";
-
-	if (pdata == NULL)
-		return -EFAULT;
+	static int instance = -1;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -191,8 +191,22 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 		goto fail_irq_get;
 	}
 
-	if (*pdata >= 0)
-		sprintf(clk_name, "usbh.%01d_clk", *pdata);
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &spear_ehci_dma_mask;
+
+	/*
+	 * Increment the device instance, when probing via device-tree
+	 */
+	if (pdev->id < 0)
+		instance++;
+	else
+		instance = pdev->id;
+	sprintf(clk_name, "usbh.%01d_clk", instance);
 
 	usbh_clk = clk_get(NULL, clk_name);
 	if (IS_ERR(usbh_clk)) {
@@ -277,6 +291,11 @@ static int spear_ehci_hcd_drv_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct of_device_id spear_ehci_id_table[] __devinitdata = {
+	{ .compatible = "st,spear600-ehci", },
+	{ },
+};
+
 static struct platform_driver spear_ehci_hcd_driver = {
 	.probe		= spear_ehci_hcd_drv_probe,
 	.remove		= spear_ehci_hcd_drv_remove,
@@ -285,6 +304,7 @@ static struct platform_driver spear_ehci_hcd_driver = {
 		.name = "spear-ehci",
 		.bus = &platform_bus_type,
 		.pm = &ehci_spear_pm_ops,
+		.of_match_table = of_match_ptr(spear_ehci_id_table),
 	}
 };
 
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 87e271b9c157..4a44bf833611 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -147,18 +147,7 @@ static int tegra_ehci_hub_control(
 
 	spin_lock_irqsave(&ehci->lock, flags);
 
-	/*
-	 * In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits
-	 * that are write on clear, by writing back the register read value, so
-	 * USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits
-	 */
-	if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) {
-		temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
-		ehci_writel(ehci, temp & ~PORT_PE, status_reg);
-		goto done;
-	}
-
-	else if (typeReq == GetPortStatus) {
+	if (typeReq == GetPortStatus) {
 		temp = ehci_readl(ehci, status_reg);
 		if (tegra->port_resuming && !(temp & PORT_SUSPEND)) {
 			/* Resume completed, re-enable disconnect detection */
@@ -174,7 +163,7 @@ static int tegra_ehci_hub_control(
 			goto done;
 		}
 
-		temp &= ~PORT_WKCONN_E;
+		temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E);
 		temp |= PORT_WKDISC_E | PORT_WKOC_E;
 		ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
 
@@ -319,26 +308,23 @@ static int tegra_ehci_setup(struct usb_hcd *hcd)
 	return retval;
 }
 
-struct temp_buffer {
+struct dma_aligned_buffer {
 	void *kmalloc_ptr;
 	void *old_xfer_buffer;
 	u8 data[0];
 };
 
-static void free_temp_buffer(struct urb *urb)
+static void free_dma_aligned_buffer(struct urb *urb)
 {
-	enum dma_data_direction dir;
-	struct temp_buffer *temp;
+	struct dma_aligned_buffer *temp;
 
 	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
 		return;
 
-	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
-
-	temp = container_of(urb->transfer_buffer, struct temp_buffer,
-			    data);
+	temp = container_of(urb->transfer_buffer,
+		struct dma_aligned_buffer, data);
 
-	if (dir == DMA_FROM_DEVICE)
+	if (usb_urb_dir_in(urb))
 		memcpy(temp->old_xfer_buffer, temp->data,
 		       urb->transfer_buffer_length);
 	urb->transfer_buffer = temp->old_xfer_buffer;
@@ -347,10 +333,9 @@ static void free_temp_buffer(struct urb *urb)
 	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
 }
 
-static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags)
+static int alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
 {
-	enum dma_data_direction dir;
-	struct temp_buffer *temp, *kmalloc_ptr;
+	struct dma_aligned_buffer *temp, *kmalloc_ptr;
 	size_t kmalloc_size;
 
 	if (urb->num_sgs || urb->sg ||
@@ -358,22 +343,19 @@ static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags)
 	    !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1)))
 		return 0;
 
-	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
-
 	/* Allocate a buffer with enough padding for alignment */
 	kmalloc_size = urb->transfer_buffer_length +
-		sizeof(struct temp_buffer) + TEGRA_USB_DMA_ALIGN - 1;
+		sizeof(struct dma_aligned_buffer) + TEGRA_USB_DMA_ALIGN - 1;
 
 	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
 	if (!kmalloc_ptr)
 		return -ENOMEM;
 
-	/* Position our struct temp_buffer such that data is aligned */
+	/* Position our struct dma_aligned_buffer such that data is aligned */
 	temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1;
-
 	temp->kmalloc_ptr = kmalloc_ptr;
 	temp->old_xfer_buffer = urb->transfer_buffer;
-	if (dir == DMA_TO_DEVICE)
+	if (usb_urb_dir_out(urb))
 		memcpy(temp->data, urb->transfer_buffer,
 		       urb->transfer_buffer_length);
 	urb->transfer_buffer = temp->data;
@@ -388,13 +370,13 @@ static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 {
 	int ret;
 
-	ret = alloc_temp_buffer(urb, mem_flags);
+	ret = alloc_dma_aligned_buffer(urb, mem_flags);
 	if (ret)
 		return ret;
 
 	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
 	if (ret)
-		free_temp_buffer(urb);
+		free_dma_aligned_buffer(urb);
 
 	return ret;
 }
@@ -402,38 +384,39 @@ static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
 {
 	usb_hcd_unmap_urb_for_dma(hcd, urb);
-	free_temp_buffer(urb);
+	free_dma_aligned_buffer(urb);
 }
 
 static const struct hc_driver tegra_ehci_hc_driver = {
 	.description		= hcd_name,
 	.product_desc		= "Tegra EHCI Host Controller",
 	.hcd_priv_size		= sizeof(struct ehci_hcd),
-
 	.flags			= HCD_USB2 | HCD_MEMORY,
 
-	.reset			= tegra_ehci_setup,
+	/* standard ehci functions */
 	.irq			= ehci_irq,
-
 	.start			= ehci_run,
 	.stop			= ehci_stop,
-	.shutdown		= tegra_ehci_shutdown,
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
-	.map_urb_for_dma	= tegra_ehci_map_urb_for_dma,
-	.unmap_urb_for_dma	= tegra_ehci_unmap_urb_for_dma,
 	.endpoint_disable	= ehci_endpoint_disable,
 	.endpoint_reset		= ehci_endpoint_reset,
 	.get_frame_number	= ehci_get_frame,
 	.hub_status_data	= ehci_hub_status_data,
-	.hub_control		= tegra_ehci_hub_control,
 	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	/* modified ehci functions for tegra */
+	.reset			= tegra_ehci_setup,
+	.shutdown		= tegra_ehci_shutdown,
+	.map_urb_for_dma	= tegra_ehci_map_urb_for_dma,
+	.unmap_urb_for_dma	= tegra_ehci_unmap_urb_for_dma,
+	.hub_control		= tegra_ehci_hub_control,
 #ifdef CONFIG_PM
 	.bus_suspend		= ehci_bus_suspend,
 	.bus_resume		= ehci_bus_resume,
 #endif
-	.relinquish_port	= ehci_relinquish_port,
-	.port_handed_over	= ehci_port_handed_over,
 };
 
 static int setup_vbus_gpio(struct platform_device *pdev,
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 0ea577bfca2a..c5ed88199292 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -155,7 +155,7 @@ u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
 	struct endpoint *ep;
 	struct usb_td __iomem *td;
 	unsigned long ep_offset;
-	char *err_for = "enpoint PRAM";
+	char *err_for = "endpoint PRAM";
 	int ep_mem_size;
 	u32 i;
 
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index ab333ac6071d..22ff6b3a676f 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -119,6 +119,39 @@ error:
 
 static const struct of_device_id fsl_usb2_mph_dr_of_match[];
 
+static int usb_get_ver_info(struct device_node *np)
+{
+	int ver = -1;
+
+	/*
+	 * returns 1 for usb controller version 1.6
+	 * returns 2 for usb controller version 2.2
+	 * returns 0 otherwise
+	 */
+	if (of_device_is_compatible(np, "fsl-usb2-dr")) {
+		if (of_device_is_compatible(np, "fsl-usb2-dr-v1.6"))
+			ver = FSL_USB_VER_1_6;
+		else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.2"))
+			ver = FSL_USB_VER_2_2;
+		else /* for previous controller versions */
+			ver = FSL_USB_VER_OLD;
+
+		if (ver > -1)
+			return ver;
+	}
+
+	if (of_device_is_compatible(np, "fsl-usb2-mph")) {
+		if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6"))
+			ver = FSL_USB_VER_1_6;
+		else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.2"))
+			ver = FSL_USB_VER_2_2;
+		else /* for previous controller versions */
+			ver = FSL_USB_VER_OLD;
+	}
+
+	return ver;
+}
+
 static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
 {
 	struct device_node *np = ofdev->dev.of_node;
@@ -166,6 +199,14 @@ static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev)
 
 	prop = of_get_property(np, "phy_type", NULL);
 	pdata->phy_mode = determine_usb_phy(prop);
+	pdata->controller_ver = usb_get_ver_info(np);
+
+	if (pdata->have_sysif_regs) {
+		if (pdata->controller_ver < 0) {
+			dev_warn(&ofdev->dev, "Could not get controller version\n");
+			return -ENODEV;
+		}
+	}
 
 	for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) {
 		if (!dev_data->drivers[i])
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index fc72d44bf787..a35bbddf8968 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1562,11 +1562,14 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 
 	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
 		retval = -ESHUTDOWN;
+		qtd_list_free(&new_qtds);
 		goto out;
 	}
 	retval = usb_hcd_link_urb_to_ep(hcd, urb);
-	if (retval)
+	if (retval) {
+		qtd_list_free(&new_qtds);
 		goto out;
+	}
 
 	qh = urb->ep->hcpriv;
 	if (qh) {
@@ -1584,6 +1587,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		if (!qh) {
 			retval = -ENOMEM;
 			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			qtd_list_free(&new_qtds);
 			goto out;
 		}
 		list_add_tail(&qh->qh_list, ep_queue);
@@ -1683,6 +1687,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
 	list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
 		if (qtd->urb == urb) {
 			dequeue_urb_from_qtd(hcd, qh, qtd);
+			list_move(&qtd->qtd_list, &qh->qtd_list);
 			break;
 		}
 
@@ -2176,7 +2181,7 @@ static const struct hc_driver isp1760_hc_driver = {
 
 int __init init_kmem_once(void)
 {
-	urb_listitem_cachep = kmem_cache_create("isp1760 urb_listitem",
+	urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem",
 			sizeof(struct urb_listitem), 0, SLAB_TEMPORARY |
 			SLAB_MEM_SPREAD, NULL);
 
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 4592dc17a9f9..fff114fd5461 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -398,6 +398,9 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev)
 	hcd = isp1760_register(mem_res->start, mem_size, irq_res->start,
 			       irqflags, -ENOENT,
 			       &pdev->dev, dev_name(&pdev->dev), devflags);
+
+	dev_set_drvdata(&pdev->dev, hcd);
+
 	if (IS_ERR(hcd)) {
 		pr_warning("isp1760: Failed to register the HCD device\n");
 		ret = -ENODEV;
@@ -417,11 +420,16 @@ static int __devexit isp1760_plat_remove(struct platform_device *pdev)
 {
 	struct resource *mem_res;
 	resource_size_t mem_size;
+	struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev);
+
+	usb_remove_hcd(hcd);
 
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	mem_size = resource_size(mem_res);
 	release_mem_region(mem_res->start, mem_size);
 
+	usb_put_hcd(hcd);
+
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 13ebeca8e73e..a665b3eaa746 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -129,7 +129,7 @@ static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver,
 	if (!hcd)
 		return -ENOMEM;
 	hcd->rsrc_start = pdev->resource[0].start;
-	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+	hcd->rsrc_len = resource_size(&pdev->resource[0]);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		pr_debug("request_mem_region failed\n");
@@ -223,7 +223,7 @@ static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
 /*-------------------------------------------------------------------------*/
 
 static int __devinit
-ohci_at91_start (struct usb_hcd *hcd)
+ohci_at91_reset (struct usb_hcd *hcd)
 {
 	struct at91_usbh_data	*board = hcd->self.controller->platform_data;
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
@@ -233,9 +233,18 @@ ohci_at91_start (struct usb_hcd *hcd)
 		return ret;
 
 	ohci->num_ports = board->ports;
+	return 0;
+}
+
+static int __devinit
+ohci_at91_start (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	int			ret;
 
 	if ((ret = ohci_run(ohci)) < 0) {
-		err("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
@@ -418,6 +427,7 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	/*
 	 * basic lifecycle operations
 	 */
+	.reset =		ohci_at91_reset,
 	.start =		ohci_at91_start,
 	.stop =			ohci_stop,
 	.shutdown =		ohci_shutdown,
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 4ea63b2cac42..c611699b4aa6 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -37,7 +37,8 @@ static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
 		return ret;
 
 	if ((ret = ohci_run(ohci)) < 0) {
-		err ("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c
index 5a00a1e1c6ca..2c9f233047be 100644
--- a/drivers/usb/host/ohci-cns3xxx.c
+++ b/drivers/usb/host/ohci-cns3xxx.c
@@ -41,7 +41,8 @@ cns3xxx_ohci_start(struct usb_hcd *hcd)
 
 	ret = ohci_run(ohci);
 	if (ret < 0) {
-		err("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 843509778a33..269b1e0f7691 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -454,3 +454,5 @@ static struct platform_driver ohci_hcd_da8xx_driver = {
 		.name	= "ohci",
 	},
 };
+
+MODULE_ALIAS("platform:ohci");
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index e4bcb62b930a..31b81f9eacdc 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -29,14 +29,14 @@ urb_print(struct urb * urb, char * str, int small, int status)
 	unsigned int pipe= urb->pipe;
 
 	if (!urb->dev || !urb->dev->bus) {
-		dbg("%s URB: no dev", str);
+		printk(KERN_DEBUG "%s URB: no dev\n", str);
 		return;
 	}
 
 #ifndef	OHCI_VERBOSE_DEBUG
 	if (status != 0)
 #endif
-	dbg("%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d stat=%d",
+	printk(KERN_DEBUG "%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d stat=%d\n",
 		    str,
 		    urb,
 		    usb_pipedevice (pipe),
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 3d63574d2c7e..dbfbd1dfd2e2 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -47,7 +47,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 	struct usb_hcd *hcd;
 
 	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-		dbg("resource[1] is not IORESOURCE_IRQ");
+		dev_dbg(&pdev->dev, "resource[1] is not IORESOURCE_IRQ\n");
 		return -ENOMEM;
 	}
 
@@ -65,14 +65,14 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (hcd->regs == NULL) {
-		dbg("ioremap failed");
+		dev_dbg(&pdev->dev, "ioremap failed\n");
 		retval = -ENOMEM;
 		goto err2;
 	}
 
 	usb_host_clock = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(usb_host_clock)) {
-		dbg("clk_get failed");
+		dev_dbg(&pdev->dev, "clk_get failed\n");
 		retval = PTR_ERR(usb_host_clock);
 		goto err3;
 	}
@@ -116,7 +116,8 @@ static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd)
 		return ret;
 
 	if ((ret = ohci_run(ohci)) < 0) {
-		err("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 37bb20ebb6fc..2909621ea196 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -35,7 +35,8 @@ static int ohci_exynos_start(struct usb_hcd *hcd)
 
 	ret = ohci_run(ohci);
 	if (ret < 0) {
-		err("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 235171f29460..e0adf5c0cf55 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1080,11 +1080,6 @@ MODULE_LICENSE ("GPL");
 #define PS3_SYSTEM_BUS_DRIVER	ps3_ohci_driver
 #endif
 
-#ifdef CONFIG_USB_OHCI_HCD_SSB
-#include "ohci-ssb.c"
-#define SSB_OHCI_DRIVER		ssb_ohci_driver
-#endif
-
 #ifdef CONFIG_MFD_SM501
 #include "ohci-sm501.c"
 #define SM501_OHCI_DRIVER	ohci_hcd_sm501_driver
@@ -1128,8 +1123,7 @@ MODULE_LICENSE ("GPL");
 	!defined(SA1111_DRIVER) &&	\
 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
 	!defined(SM501_OHCI_DRIVER) && \
-	!defined(TMIO_OHCI_DRIVER) && \
-	!defined(SSB_OHCI_DRIVER)
+	!defined(TMIO_OHCI_DRIVER)
 #error "missing bus glue for ohci-hcd"
 #endif
 
@@ -1195,12 +1189,6 @@ static int __init ohci_hcd_mod_init(void)
 		goto error_pci;
 #endif
 
-#ifdef SSB_OHCI_DRIVER
-	retval = ssb_driver_register(&SSB_OHCI_DRIVER);
-	if (retval)
-		goto error_ssb;
-#endif
-
 #ifdef SM501_OHCI_DRIVER
 	retval = platform_driver_register(&SM501_OHCI_DRIVER);
 	if (retval < 0)
@@ -1224,10 +1212,6 @@ static int __init ohci_hcd_mod_init(void)
 	platform_driver_unregister(&SM501_OHCI_DRIVER);
  error_sm501:
 #endif
-#ifdef SSB_OHCI_DRIVER
-	ssb_driver_unregister(&SSB_OHCI_DRIVER);
- error_ssb:
-#endif
 #ifdef PCI_DRIVER
 	pci_unregister_driver(&PCI_DRIVER);
  error_pci:
@@ -1275,9 +1259,6 @@ static void __exit ohci_hcd_mod_exit(void)
 #ifdef SM501_OHCI_DRIVER
 	platform_driver_unregister(&SM501_OHCI_DRIVER);
 #endif
-#ifdef SSB_OHCI_DRIVER
-	ssb_driver_unregister(&SSB_OHCI_DRIVER);
-#endif
 #ifdef PCI_DRIVER
 	pci_unregister_driver(&PCI_DRIVER);
 #endif
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index 6618de1d881d..1e364ec962fb 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -22,6 +22,8 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/usb/isp1301.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -29,7 +31,6 @@
 
 #include <mach/platform.h>
 #include <mach/irqs.h>
-#include <asm/gpio.h>
 
 #define USB_CONFIG_BASE		0x31020000
 #define PWRMAN_BASE		0x40004000
@@ -38,7 +39,9 @@
 
 /* USB_CTRL bit defines */
 #define USB_SLAVE_HCLK_EN	(1 << 24)
+#define USB_DEV_NEED_CLK_EN	(1 << 22)
 #define USB_HOST_NEED_CLK_EN	(1 << 21)
+#define PAD_CONTROL_LAST_DRIVEN	(1 << 19)
 
 #define USB_OTG_CLK_CTRL	IO_ADDRESS(USB_CONFIG_BASE + 0xFF4)
 #define USB_OTG_CLK_STAT	IO_ADDRESS(USB_CONFIG_BASE + 0xFF8)
@@ -56,54 +59,6 @@
 #define TRANSPARENT_I2C_EN	(1 << 7)
 #define HOST_EN			(1 << 0)
 
-/* ISP1301 USB transceiver I2C registers */
-#define	ISP1301_MODE_CONTROL_1		0x04	/* u8 read, set, +1 clear */
-
-#define	MC1_SPEED_REG		(1 << 0)
-#define	MC1_SUSPEND_REG		(1 << 1)
-#define	MC1_DAT_SE0		(1 << 2)
-#define	MC1_TRANSPARENT		(1 << 3)
-#define	MC1_BDIS_ACON_EN	(1 << 4)
-#define	MC1_OE_INT_EN		(1 << 5)
-#define	MC1_UART_EN		(1 << 6)
-#define	MC1_MASK		0x7f
-
-#define	ISP1301_MODE_CONTROL_2		0x12	/* u8 read, set, +1 clear */
-
-#define	MC2_GLOBAL_PWR_DN	(1 << 0)
-#define	MC2_SPD_SUSP_CTRL	(1 << 1)
-#define	MC2_BI_DI		(1 << 2)
-#define	MC2_TRANSP_BDIR0	(1 << 3)
-#define	MC2_TRANSP_BDIR1	(1 << 4)
-#define	MC2_AUDIO_EN		(1 << 5)
-#define	MC2_PSW_EN		(1 << 6)
-#define	MC2_EN2V7		(1 << 7)
-
-#define	ISP1301_OTG_CONTROL_1		0x06	/* u8 read, set, +1 clear */
-#	define	OTG1_DP_PULLUP		(1 << 0)
-#	define	OTG1_DM_PULLUP		(1 << 1)
-#	define	OTG1_DP_PULLDOWN	(1 << 2)
-#	define	OTG1_DM_PULLDOWN	(1 << 3)
-#	define	OTG1_ID_PULLDOWN	(1 << 4)
-#	define	OTG1_VBUS_DRV		(1 << 5)
-#	define	OTG1_VBUS_DISCHRG	(1 << 6)
-#	define	OTG1_VBUS_CHRG		(1 << 7)
-#define	ISP1301_OTG_STATUS		0x10	/* u8 readonly */
-#	define	OTG_B_SESS_END		(1 << 6)
-#	define	OTG_B_SESS_VLD		(1 << 7)
-
-#define ISP1301_I2C_ADDR 0x2C
-
-#define ISP1301_I2C_MODE_CONTROL_1 0x4
-#define ISP1301_I2C_MODE_CONTROL_2 0x12
-#define ISP1301_I2C_OTG_CONTROL_1 0x6
-#define ISP1301_I2C_OTG_CONTROL_2 0x10
-#define ISP1301_I2C_INTERRUPT_SOURCE 0x8
-#define ISP1301_I2C_INTERRUPT_LATCH 0xA
-#define ISP1301_I2C_INTERRUPT_FALLING 0xC
-#define ISP1301_I2C_INTERRUPT_RISING 0xE
-#define ISP1301_I2C_REG_CLEAR_ADDR 1
-
 /* On LPC32xx, those are undefined */
 #ifndef start_int_set_falling_edge
 #define start_int_set_falling_edge(irq)
@@ -113,42 +68,12 @@
 #define start_int_umask(irq)
 #endif
 
-static struct i2c_driver isp1301_driver;
 static struct i2c_client *isp1301_i2c_client;
 
 extern int usb_disabled(void);
-extern int ocpi_enable(void);
 
 static struct clk *usb_clk;
 
-static const unsigned short normal_i2c[] =
-    { ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END };
-
-static int isp1301_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	return 0;
-}
-
-static int isp1301_remove(struct i2c_client *client)
-{
-	return 0;
-}
-
-static const struct i2c_device_id isp1301_id[] = {
-	{ "isp1301_nxp", 0 },
-	{ }
-};
-
-static struct i2c_driver isp1301_driver = {
-	.driver = {
-		.name = "isp1301_nxp",
-	},
-	.probe = isp1301_probe,
-	.remove = isp1301_remove,
-	.id_table = isp1301_id,
-};
-
 static void isp1301_configure_pnx4008(void)
 {
 	/* PNX4008 only supports DAT_SE0 USB mode */
@@ -220,7 +145,7 @@ static void isp1301_configure_lpc32xx(void)
 		ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
 
 	/* Enable usb_need_clk clock after transceiver is initialized */
-	__raw_writel((__raw_readl(USB_CTRL) | (1 << 22)), USB_CTRL);
+	__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
 
 	printk(KERN_INFO "ISP1301 Vendor ID  : 0x%04x\n",
 	      i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
@@ -372,65 +297,55 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
 	struct usb_hcd *hcd = 0;
 	struct ohci_hcd *ohci;
 	const struct hc_driver *driver = &ohci_nxp_hc_driver;
-	struct i2c_adapter *i2c_adap;
-	struct i2c_board_info i2c_info;
-
+	struct resource *res;
 	int ret = 0, irq;
+	struct device_node *isp1301_node;
 
-	dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
-	if (usb_disabled()) {
-		err("USB is disabled");
-		ret = -ENODEV;
-		goto out;
+	if (pdev->dev.of_node) {
+		isp1301_node = of_parse_phandle(pdev->dev.of_node,
+						"transceiver", 0);
+	} else {
+		isp1301_node = NULL;
 	}
 
-	if (pdev->num_resources != 2
-	    || pdev->resource[0].flags != IORESOURCE_MEM
-	    || pdev->resource[1].flags != IORESOURCE_IRQ) {
-		err("Invalid resource configuration");
-		ret = -ENODEV;
+	isp1301_i2c_client = isp1301_get_client(isp1301_node);
+	if (!isp1301_i2c_client) {
+		ret = -EPROBE_DEFER;
 		goto out;
 	}
 
-	/* Enable AHB slave USB clock, needed for further USB clock control */
-	__raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL);
+	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
 
-	ret = i2c_add_driver(&isp1301_driver);
-	if (ret < 0) {
-		err("failed to add ISP1301 driver");
-		goto out;
-	}
-	i2c_adap = i2c_get_adapter(2);
-	memset(&i2c_info, 0, sizeof(struct i2c_board_info));
-	strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE);
-	isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
-						   normal_i2c, NULL);
-	i2c_put_adapter(i2c_adap);
-	if (!isp1301_i2c_client) {
-		err("failed to connect I2C to ISP1301 USB Transceiver");
+	dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
+	if (usb_disabled()) {
+		dev_err(&pdev->dev, "USB is disabled\n");
 		ret = -ENODEV;
-		goto out_i2c_driver;
+		goto out;
 	}
 
+	/* Enable AHB slave USB clock, needed for further USB clock control */
+	__raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL);
+
 	isp1301_configure();
 
 	/* Enable USB PLL */
 	usb_clk = clk_get(&pdev->dev, "ck_pll5");
 	if (IS_ERR(usb_clk)) {
-		err("failed to acquire USB PLL");
+		dev_err(&pdev->dev, "failed to acquire USB PLL\n");
 		ret = PTR_ERR(usb_clk);
 		goto out1;
 	}
 
 	ret = clk_enable(usb_clk);
 	if (ret < 0) {
-		err("failed to start USB PLL");
+		dev_err(&pdev->dev, "failed to start USB PLL\n");
 		goto out2;
 	}
 
 	ret = clk_set_rate(usb_clk, 48000);
 	if (ret < 0) {
-		err("failed to set USB clock rate");
+		dev_err(&pdev->dev, "failed to set USB clock rate\n");
 		goto out3;
 	}
 
@@ -442,9 +357,9 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
 	while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) !=
 	       USB_CLOCK_MASK) ;
 
-	hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev));
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 	if (!hcd) {
-		err("Failed to allocate HC buffer");
+		dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
 		ret = -ENOMEM;
 		goto out3;
 	}
@@ -452,14 +367,21 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
 	/* Set all USB bits in the Start Enable register */
 	nxp_set_usb_bits();
 
-	hcd->rsrc_start = pdev->resource[0].start;
-	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		dev_dbg(&pdev->dev, "request_mem_region failed\n");
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get MEM resource\n");
+		ret =  -ENOMEM;
+		goto out4;
+	}
+
+	hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "Failed to devm_request_and_ioremap\n");
 		ret =  -ENOMEM;
 		goto out4;
 	}
-	hcd->regs = (void __iomem *)pdev->resource[0].start;
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -486,10 +408,7 @@ out3:
 out2:
 	clk_put(usb_clk);
 out1:
-	i2c_unregister_device(isp1301_i2c_client);
 	isp1301_i2c_client = NULL;
-out_i2c_driver:
-	i2c_del_driver(&isp1301_driver);
 out:
 	return ret;
 }
@@ -507,7 +426,6 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev)
 	clk_put(usb_clk);
 	i2c_unregister_device(isp1301_i2c_client);
 	isp1301_i2c_client = NULL;
-	i2c_del_driver(&isp1301_driver);
 
 	platform_set_drvdata(pdev, NULL);
 
@@ -517,10 +435,19 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:usb-ohci");
 
+#ifdef CONFIG_OF
+static const struct of_device_id usb_hcd_nxp_match[] = {
+	{ .compatible = "nxp,ohci-nxp" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, usb_hcd_nxp_match);
+#endif
+
 static struct platform_driver usb_hcd_nxp_driver = {
 	.driver = {
 		.name = "usb-ohci",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(usb_hcd_nxp_match),
 	},
 	.probe = usb_hcd_nxp_probe,
 	.remove = usb_hcd_nxp_remove,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 71229cb97e3e..9ce35d0d9d5d 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -218,8 +218,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 			dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n",
 					ohci->transceiver->label, status);
 			if (status) {
-				if (ohci->transceiver)
-					put_device(ohci->transceiver->dev);
+				usb_put_transceiver(ohci->transceiver);
 				return status;
 			}
 		} else {
@@ -406,7 +405,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 	usb_remove_hcd(hcd);
 	if (ohci->transceiver) {
 		(void) otg_set_host(ohci->transceiver->otg, 0);
-		put_device(ohci->transceiver->dev);
+		usb_put_transceiver(ohci->transceiver);
 	}
 	if (machine_is_omap_osk())
 		gpio_free(9);
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index ec5c6791c8b4..670c7059c9ae 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -93,13 +93,13 @@ static int __devinit ohci_platform_probe(struct platform_device *dev)
 
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
-		pr_err("no irq provieded");
+		pr_err("no irq provided");
 		return irq;
 	}
 
 	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (!res_mem) {
-		pr_err("no memory recourse provieded");
+		pr_err("no memory recourse provided");
 		return -ENXIO;
 	}
 
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index f13d08f94d6b..148d27d6a67c 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -157,7 +157,8 @@ ohci_pnx8550_start (struct usb_hcd *hcd)
 		return ret;
 
 	if ((ret = ohci_run (ohci)) < 0) {
-		err ("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s",
+			hcd->self.bus_name);
 		ohci_stop (hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index d24cc89de16f..e27d5ae2b9eb 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -29,7 +29,8 @@ ohci_ppc_of_start(struct usb_hcd *hcd)
 		return ret;
 
 	if ((ret = ohci_run(ohci)) < 0) {
-		err("can't start %s", ohci_to_hcd(ohci)->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
@@ -236,7 +237,7 @@ MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match);
 
 #if	!defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \
 	!defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE)
-#error "No endianess selected for ppc-of-ohci"
+#error "No endianness selected for ppc-of-ohci"
 #endif
 
 
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 1514b7067470..185c39ed81b7 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -130,7 +130,8 @@ ohci_ppc_soc_start(struct usb_hcd *hcd)
 		return ret;
 
 	if ((ret = ohci_run(ohci)) < 0) {
-		err("can't start %s", ohci_to_hcd(ohci)->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 6fd4fa1f19bb..2ee1d8d713d2 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -45,7 +45,8 @@ static int __devinit ps3_ohci_hc_start(struct usb_hcd *hcd)
 	result = ohci_run(ohci);
 
 	if (result < 0) {
-		err("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 	}
 
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index c31b2815be1c..e1a3cc6d28dc 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -419,7 +419,8 @@ ohci_pxa27x_start (struct usb_hcd *hcd)
 		return ret;
 
 	if ((ret = ohci_run (ohci)) < 0) {
-		err ("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s",
+			hcd->self.bus_name);
 		ohci_stop (hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 56dcf069246d..664c869eb096 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -420,7 +420,8 @@ ohci_s3c2410_start(struct usb_hcd *hcd)
 
 	ret = ohci_run(ohci);
 	if (ret < 0) {
-		err("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index e1004fb37bd9..b6cc92520924 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -46,7 +46,7 @@ static void dump_hci_status(struct usb_hcd *hcd, const char *label)
 {
 	unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
 
-	dbg("%s USB_STATUS = { %s%s%s%s%s}", label,
+	printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
 	     ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
 	     ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
 	     ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
@@ -193,7 +193,7 @@ static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 	hcd->rsrc_len = resource_size(&dev->res);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		dbg("request_mem_region failed");
+		dev_dbg(&dev->dev, "request_mem_region failed\n");
 		ret = -EBUSY;
 		goto err1;
 	}
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 84686d90805b..76a20c278362 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -88,20 +88,20 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
-		err("platform_get_resource error.");
+		dev_err(&pdev->dev, "platform_get_resource error.\n");
 		return -ENODEV;
 	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
-		err("platform_get_irq error.");
+		dev_err(&pdev->dev, "platform_get_irq error.\n");
 		return -ENODEV;
 	}
 
 	/* initialize hcd */
 	hcd = usb_create_hcd(&ohci_sh_hc_driver, &pdev->dev, (char *)hcd_name);
 	if (!hcd) {
-		err("Failed to create hcd");
+		dev_err(&pdev->dev, "Failed to create hcd\n");
 		return -ENOMEM;
 	}
 
@@ -110,7 +110,7 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(res);
 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret != 0) {
-		err("Failed to add hcd");
+		dev_err(&pdev->dev, "Failed to add hcd\n");
 		usb_put_hcd(hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 95c16489e883..fc7305ee3c9c 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -14,6 +14,7 @@
 #include <linux/signal.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/of.h>
 
 struct spear_ohci {
 	struct ohci_hcd ohci;
@@ -24,12 +25,12 @@ struct spear_ohci {
 
 static void spear_start_ohci(struct spear_ohci *ohci)
 {
-	clk_enable(ohci->clk);
+	clk_prepare_enable(ohci->clk);
 }
 
 static void spear_stop_ohci(struct spear_ohci *ohci)
 {
-	clk_disable(ohci->clk);
+	clk_disable_unprepare(ohci->clk);
 }
 
 static int __devinit ohci_spear_start(struct usb_hcd *hcd)
@@ -90,6 +91,8 @@ static const struct hc_driver ohci_spear_hc_driver = {
 	.start_port_reset	= ohci_start_port_reset,
 };
 
+static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32);
+
 static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 {
 	const struct hc_driver *driver = &ohci_spear_hc_driver;
@@ -98,11 +101,8 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 	struct spear_ohci *ohci_p;
 	struct resource *res;
 	int retval, irq;
-	int *pdata = pdev->dev.platform_data;
 	char clk_name[20] = "usbh_clk";
-
-	if (pdata == NULL)
-		return -EFAULT;
+	static int instance = -1;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -110,8 +110,22 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 		goto fail_irq_get;
 	}
 
-	if (*pdata >= 0)
-		sprintf(clk_name, "usbh.%01d_clk", *pdata);
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &spear_ohci_dma_mask;
+
+	/*
+	 * Increment the device instance, when probing via device-tree
+	 */
+	if (pdev->id < 0)
+		instance++;
+	else
+		instance = pdev->id;
+	sprintf(clk_name, "usbh.%01d_clk", instance);
 
 	usbh_clk = clk_get(NULL, clk_name);
 	if (IS_ERR(usbh_clk)) {
@@ -222,6 +236,11 @@ static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
 }
 #endif
 
+static struct of_device_id spear_ohci_id_table[] __devinitdata = {
+	{ .compatible = "st,spear600-ohci", },
+	{ },
+};
+
 /* Driver definition to register with the platform bus */
 static struct platform_driver spear_ohci_hcd_driver = {
 	.probe =	spear_ohci_hcd_drv_probe,
@@ -233,6 +252,7 @@ static struct platform_driver spear_ohci_hcd_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "spear-ohci",
+		.of_match_table = of_match_ptr(spear_ohci_id_table),
 	},
 };
 
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
deleted file mode 100644
index 5ba18595d6f7..000000000000
--- a/drivers/usb/host/ohci-ssb.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * Sonics Silicon Backplane
- * Broadcom USB-core OHCI driver
- *
- * Copyright 2007 Michael Buesch <m@bues.ch>
- *
- * Derived from the OHCI-PCI driver
- * Copyright 1999 Roman Weissgaerber
- * Copyright 2000-2002 David Brownell
- * Copyright 1999 Linus Torvalds
- * Copyright 1999 Gregory P. Smith
- *
- * Derived from the USBcore related parts of Broadcom-SB
- * Copyright 2005 Broadcom Corporation
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-#include <linux/ssb/ssb.h>
-
-
-#define SSB_OHCI_TMSLOW_HOSTMODE	(1 << 29)
-
-struct ssb_ohci_device {
-	struct ohci_hcd ohci; /* _must_ be at the beginning. */
-
-	u32 enable_flags;
-};
-
-static inline
-struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
-{
-	return (struct ssb_ohci_device *)(hcd->hcd_priv);
-}
-
-
-static int ssb_ohci_reset(struct usb_hcd *hcd)
-{
-	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-	struct ohci_hcd *ohci = &ohcidev->ohci;
-	int err;
-
-	ohci_hcd_init(ohci);
-	err = ohci_init(ohci);
-
-	return err;
-}
-
-static int ssb_ohci_start(struct usb_hcd *hcd)
-{
-	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-	struct ohci_hcd *ohci = &ohcidev->ohci;
-	int err;
-
-	err = ohci_run(ohci);
-	if (err < 0) {
-		ohci_err(ohci, "can't start\n");
-		ohci_stop(hcd);
-	}
-
-	return err;
-}
-
-static const struct hc_driver ssb_ohci_hc_driver = {
-	.description		= "ssb-usb-ohci",
-	.product_desc		= "SSB OHCI Controller",
-	.hcd_priv_size		= sizeof(struct ssb_ohci_device),
-
-	.irq			= ohci_irq,
-	.flags			= HCD_MEMORY | HCD_USB11,
-
-	.reset			= ssb_ohci_reset,
-	.start			= ssb_ohci_start,
-	.stop			= ohci_stop,
-	.shutdown		= ohci_shutdown,
-
-	.urb_enqueue		= ohci_urb_enqueue,
-	.urb_dequeue		= ohci_urb_dequeue,
-	.endpoint_disable	= ohci_endpoint_disable,
-
-	.get_frame_number	= ohci_get_frame,
-
-	.hub_status_data	= ohci_hub_status_data,
-	.hub_control		= ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend		= ohci_bus_suspend,
-	.bus_resume		= ohci_bus_resume,
-#endif
-
-	.start_port_reset	= ohci_start_port_reset,
-};
-
-static void ssb_ohci_detach(struct ssb_device *dev)
-{
-	struct usb_hcd *hcd = ssb_get_drvdata(dev);
-
-	if (hcd->driver->shutdown)
-		hcd->driver->shutdown(hcd);
-	usb_remove_hcd(hcd);
-	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
-	ssb_device_disable(dev, 0);
-}
-
-static int ssb_ohci_attach(struct ssb_device *dev)
-{
-	struct ssb_ohci_device *ohcidev;
-	struct usb_hcd *hcd;
-	int err = -ENOMEM;
-	u32 tmp, flags = 0;
-
-	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
-	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
-		return -EOPNOTSUPP;
-
-	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
-		/* Put the device into host-mode. */
-		flags |= SSB_OHCI_TMSLOW_HOSTMODE;
-		ssb_device_enable(dev, flags);
-	} else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-		/*
-		 * USB 2.0 special considerations:
-		 *
-		 * In addition to the standard SSB reset sequence, the Host
-		 * Control Register must be programmed to bring the USB core
-		 * and various phy components out of reset.
-		 */
-		ssb_device_enable(dev, 0);
-		ssb_write32(dev, 0x200, 0x7ff);
-
-		/* Change Flush control reg */
-		tmp = ssb_read32(dev, 0x400);
-		tmp &= ~8;
-		ssb_write32(dev, 0x400, tmp);
-		tmp = ssb_read32(dev, 0x400);
-
-		/* Change Shim control reg */
-		tmp = ssb_read32(dev, 0x304);
-		tmp &= ~0x100;
-		ssb_write32(dev, 0x304, tmp);
-		tmp = ssb_read32(dev, 0x304);
-
-		udelay(1);
-
-		/* Work around for 5354 failures */
-		if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
-			/* Change syn01 reg */
-			tmp = 0x00fe00fe;
-			ssb_write32(dev, 0x894, tmp);
-
-			/* Change syn03 reg */
-			tmp = ssb_read32(dev, 0x89c);
-			tmp |= 0x1;
-			ssb_write32(dev, 0x89c, tmp);
-		}
-	} else
-		ssb_device_enable(dev, 0);
-
-	hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
-			dev_name(dev->dev));
-	if (!hcd)
-		goto err_dev_disable;
-	ohcidev = hcd_to_ssb_ohci(hcd);
-	ohcidev->enable_flags = flags;
-
-	tmp = ssb_read32(dev, SSB_ADMATCH0);
-	hcd->rsrc_start = ssb_admatch_base(tmp);
-	hcd->rsrc_len = ssb_admatch_size(tmp);
-	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
-	if (!hcd->regs)
-		goto err_put_hcd;
-	err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
-	if (err)
-		goto err_iounmap;
-
-	ssb_set_drvdata(dev, hcd);
-
-	return err;
-
-err_iounmap:
-	iounmap(hcd->regs);
-err_put_hcd:
-	usb_put_hcd(hcd);
-err_dev_disable:
-	ssb_device_disable(dev, flags);
-	return err;
-}
-
-static int ssb_ohci_probe(struct ssb_device *dev,
-		const struct ssb_device_id *id)
-{
-	int err;
-	u16 chipid_top;
-
-	/* USBcores are only connected on embedded devices. */
-	chipid_top = (dev->bus->chip_id & 0xFF00);
-	if (chipid_top != 0x4700 && chipid_top != 0x5300)
-		return -ENODEV;
-
-	/* TODO: Probably need checks here; is the core connected? */
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	/* We currently always attach SSB_DEV_USB11_HOSTDEV
-	 * as HOST OHCI. If we want to attach it as Client device,
-	 * we must branch here and call into the (yet to
-	 * be written) Client mode driver. Same for remove(). */
-
-	err = ssb_ohci_attach(dev);
-
-	return err;
-}
-
-static void ssb_ohci_remove(struct ssb_device *dev)
-{
-	ssb_ohci_detach(dev);
-}
-
-#ifdef CONFIG_PM
-
-static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
-{
-	ssb_device_disable(dev, 0);
-
-	return 0;
-}
-
-static int ssb_ohci_resume(struct ssb_device *dev)
-{
-	struct usb_hcd *hcd = ssb_get_drvdata(dev);
-	struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
-
-	ssb_device_enable(dev, ohcidev->enable_flags);
-
-	ohci_finish_controller_resume(hcd);
-	return 0;
-}
-
-#else /* !CONFIG_PM */
-#define ssb_ohci_suspend	NULL
-#define ssb_ohci_resume	NULL
-#endif /* CONFIG_PM */
-
-static const struct ssb_device_id ssb_ohci_table[] = {
-	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
-	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-	SSB_DEVTABLE_END
-};
-MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
-
-static struct ssb_driver ssb_ohci_driver = {
-	.name		= KBUILD_MODNAME,
-	.id_table	= ssb_ohci_table,
-	.probe		= ssb_ohci_probe,
-	.remove		= ssb_ohci_remove,
-	.suspend	= ssb_ohci_suspend,
-	.resume		= ssb_ohci_resume,
-};
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 120bfe6ede38..60c2b0722f2e 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -140,7 +140,8 @@ static int ohci_tmio_start(struct usb_hcd *hcd)
 		return ret;
 
 	if ((ret = ohci_run(ohci)) < 0) {
-		err("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
index a2247867af86..41e378f17c66 100644
--- a/drivers/usb/host/ohci-xls.c
+++ b/drivers/usb/host/ohci-xls.c
@@ -88,7 +88,8 @@ static int __devinit ohci_xls_start(struct usb_hcd *hcd)
 	ohci = hcd_to_ohci(hcd);
 	ret = ohci_run(ohci);
 	if (ret < 0) {
-		err("can't start %s", hcd->self.bus_name);
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
 		ohci_stop(hcd);
 		return ret;
 	}
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 3b38030b02a8..4f0f0339532f 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -1399,8 +1399,8 @@ static struct ehci_qh *qh_make(struct oxu_hcd *oxu,
 				 * But interval 1 scheduling is simpler, and
 				 * includes high bandwidth.
 				 */
-				dbg("intr period %d uframes, NYET!",
-						urb->interval);
+				oxu_dbg(oxu, "intr period %d uframes, NYET!\n",
+					urb->interval);
 				goto done;
 			}
 		} else {
@@ -1471,7 +1471,7 @@ static struct ehci_qh *qh_make(struct oxu_hcd *oxu,
 		}
 		break;
 	default:
-		dbg("bogus dev %p speed %d", urb->dev, urb->dev->speed);
+		oxu_dbg(oxu, "bogus dev %p speed %d\n", urb->dev, urb->dev->speed);
 done:
 		qh_put(qh);
 		return NULL;
@@ -2307,7 +2307,7 @@ restart:
 				qh_put(temp.qh);
 				break;
 			default:
-				dbg("corrupt type %d frame %d shadow %p",
+				oxu_dbg(oxu, "corrupt type %d frame %d shadow %p\n",
 					type, frame, q.ptr);
 				q.ptr = NULL;
 			}
@@ -2991,8 +2991,9 @@ static int oxu_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 				/* shouldn't happen often, but ...
 				 * FIXME kill those tds' urbs
 				 */
-				err("can't reschedule qh %p, err %d",
-					qh, status);
+				dev_err(hcd->self.controller,
+					"can't reschedule qh %p, err %d\n", qh,
+					status);
 			}
 			return status;
 		}
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 32dada8c8b4f..df0828cb2aa3 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/kconfig.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
@@ -712,12 +713,28 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
 	return -ETIMEDOUT;
 }
 
-bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
+#define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI	0x8C31
+
+bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev)
 {
 	return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
 		pdev->vendor == PCI_VENDOR_ID_INTEL &&
 		pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI;
 }
+
+/* The Intel Lynx Point chipset also has switchable ports. */
+bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev)
+{
+	return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
+		pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI;
+}
+
+bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
+{
+	return usb_is_intel_ppt_switchable_xhci(pdev) ||
+		usb_is_intel_lpt_switchable_xhci(pdev);
+}
 EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci);
 
 /*
@@ -742,6 +759,19 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 {
 	u32		ports_available;
 
+	/* Don't switchover the ports if the user hasn't compiled the xHCI
+	 * driver.  Otherwise they will see "dead" USB ports that don't power
+	 * the devices.
+	 */
+	if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) {
+		dev_warn(&xhci_pdev->dev,
+				"CONFIG_USB_XHCI_HCD is turned off, "
+				"defaulting to EHCI.\n");
+		dev_warn(&xhci_pdev->dev,
+				"USB 3.0 devices will work at USB 2.0 speeds.\n");
+		return;
+	}
+
 	ports_available = 0xffffffff;
 	/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
 	 * Register, to turn on SuperSpeed terminations for all
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 2bf1320dc9c3..c868be65e763 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -401,7 +401,7 @@ static u8 alloc_usb_address(struct r8a66597 *r8a66597, struct urb *urb)
 		if (r8a66597->address_map & (1 << addr))
 			continue;
 
-		dbg("alloc_address: r8a66597_addr=%d", addr);
+		dev_dbg(&urb->dev->dev, "alloc_address: r8a66597_addr=%d\n", addr);
 		r8a66597->address_map |= 1 << addr;
 
 		if (make_r8a66597_device(r8a66597, urb, addr) < 0)
@@ -426,7 +426,7 @@ static void free_usb_address(struct r8a66597 *r8a66597,
 	if (!dev)
 		return;
 
-	dbg("free_addr: addr=%d", dev->address);
+	dev_dbg(&dev->udev->dev, "free_addr: addr=%d\n", dev->address);
 
 	dev->state = USB_STATE_DEFAULT;
 	r8a66597->address_map &= ~(1 << dev->address);
@@ -819,7 +819,7 @@ static void enable_r8a66597_pipe(struct r8a66597 *r8a66597, struct urb *urb,
 	struct r8a66597_device *dev = get_urb_to_r8a66597_dev(r8a66597, urb);
 	struct r8a66597_pipe *pipe = hep->hcpriv;
 
-	dbg("enable_pipe:");
+	dev_dbg(&dev->udev->dev, "enable_pipe:\n");
 
 	pipe->info = *info;
 	set_pipe_reg_addr(pipe, R8A66597_PIPE_NO_DMA);
@@ -898,7 +898,7 @@ static void disable_r8a66597_pipe_all(struct r8a66597 *r8a66597,
 		force_dequeue(r8a66597, pipenum, dev->address);
 	}
 
-	dbg("disable_pipe");
+	dev_dbg(&dev->udev->dev, "disable_pipe\n");
 
 	r8a66597->dma_map &= ~(dev->dma_map);
 	dev->dma_map = 0;
@@ -2264,7 +2264,7 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd)
 	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
 	int port;
 
-	dbg("%s", __func__);
+	dev_dbg(&r8a66597->device0.udev->dev, "%s\n", __func__);
 
 	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
@@ -2273,7 +2273,7 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd)
 		if (!(rh->port & USB_PORT_STAT_ENABLE))
 			continue;
 
-		dbg("suspend port = %d", port);
+		dev_dbg(&rh->dev->udev->dev, "suspend port = %d\n", port);
 		r8a66597_bclr(r8a66597, UACT, dvstctr_reg);	/* suspend */
 		rh->port |= USB_PORT_STAT_SUSPEND;
 
@@ -2295,7 +2295,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
 	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
 	int port;
 
-	dbg("%s", __func__);
+	dev_dbg(&r8a66597->device0.udev->dev, "%s\n", __func__);
 
 	for (port = 0; port < r8a66597->max_root_hub; port++) {
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
@@ -2304,7 +2304,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
 		if (!(rh->port & USB_PORT_STAT_SUSPEND))
 			continue;
 
-		dbg("resume port = %d", port);
+		dev_dbg(&rh->dev->udev->dev, "resume port = %d\n", port);
 		rh->port &= ~USB_PORT_STAT_SUSPEND;
 		rh->port |= USB_PORT_STAT_C_SUSPEND << 16;
 		r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
@@ -2360,7 +2360,7 @@ static int r8a66597_suspend(struct device *dev)
 	struct r8a66597		*r8a66597 = dev_get_drvdata(dev);
 	int port;
 
-	dbg("%s", __func__);
+	dev_dbg(dev, "%s\n", __func__);
 
 	disable_controller(r8a66597);
 
@@ -2378,7 +2378,7 @@ static int r8a66597_resume(struct device *dev)
 	struct r8a66597		*r8a66597 = dev_get_drvdata(dev);
 	struct usb_hcd		*hcd = r8a66597_to_hcd(r8a66597);
 
-	dbg("%s", __func__);
+	dev_dbg(dev, "%s\n", __func__);
 
 	enable_controller(r8a66597);
 	usb_root_hub_lost_power(hcd->self.root_hub);
diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c
new file mode 100644
index 000000000000..c2a29faba076
--- /dev/null
+++ b/drivers/usb/host/ssb-hcd.c
@@ -0,0 +1,280 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom USB-core driver  (SSB bus glue)
+ *
+ * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Based on ssb-ohci driver
+ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Derived from the OHCI-PCI driver
+ * Copyright 1999 Roman Weissgaerber
+ * Copyright 2000-2002 David Brownell
+ * Copyright 1999 Linus Torvalds
+ * Copyright 1999 Gregory P. Smith
+ *
+ * Derived from the USBcore related parts of Broadcom-SB
+ * Copyright 2005-2011 Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/ssb/ssb.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+MODULE_AUTHOR("Hauke Mehrtens");
+MODULE_DESCRIPTION("Common USB driver for SSB Bus");
+MODULE_LICENSE("GPL");
+
+#define SSB_HCD_TMSLOW_HOSTMODE	(1 << 29)
+
+struct ssb_hcd_device {
+	struct platform_device *ehci_dev;
+	struct platform_device *ohci_dev;
+
+	u32 enable_flags;
+};
+
+static void __devinit ssb_hcd_5354wa(struct ssb_device *dev)
+{
+#ifdef CONFIG_SSB_DRIVER_MIPS
+	/* Work around for 5354 failures */
+	if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
+		/* Change syn01 reg */
+		ssb_write32(dev, 0x894, 0x00fe00fe);
+
+		/* Change syn03 reg */
+		ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1);
+	}
+#endif
+}
+
+static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev)
+{
+	if (dev->id.coreid == SSB_DEV_USB20_HOST) {
+		/*
+		 * USB 2.0 special considerations:
+		 *
+		 * In addition to the standard SSB reset sequence, the Host
+		 * Control Register must be programmed to bring the USB core
+		 * and various phy components out of reset.
+		 */
+		ssb_write32(dev, 0x200, 0x7ff);
+
+		/* Change Flush control reg */
+		ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8);
+		ssb_read32(dev, 0x400);
+
+		/* Change Shim control reg */
+		ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100);
+		ssb_read32(dev, 0x304);
+
+		udelay(1);
+
+		ssb_hcd_5354wa(dev);
+	}
+}
+
+/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
+static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev)
+{
+	u32 flags = 0;
+
+	if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
+		/* Put the device into host-mode. */
+		flags |= SSB_HCD_TMSLOW_HOSTMODE;
+
+	ssb_device_enable(dev, flags);
+
+	ssb_hcd_usb20wa(dev);
+
+	return flags;
+}
+
+static const struct usb_ehci_pdata ehci_pdata = {
+};
+
+static const struct usb_ohci_pdata ohci_pdata = {
+};
+
+static struct platform_device * __devinit
+ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len)
+{
+	struct platform_device *hci_dev;
+	struct resource hci_res[2];
+	int ret = -ENOMEM;
+
+	memset(hci_res, 0, sizeof(hci_res));
+
+	hci_res[0].start = addr;
+	hci_res[0].end = hci_res[0].start + len - 1;
+	hci_res[0].flags = IORESOURCE_MEM;
+
+	hci_res[1].start = dev->irq;
+	hci_res[1].flags = IORESOURCE_IRQ;
+
+	hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
+					"ehci-platform" , 0);
+	if (!hci_dev)
+		return NULL;
+
+	hci_dev->dev.parent = dev->dev;
+	hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
+
+	ret = platform_device_add_resources(hci_dev, hci_res,
+					    ARRAY_SIZE(hci_res));
+	if (ret)
+		goto err_alloc;
+	if (ohci)
+		ret = platform_device_add_data(hci_dev, &ohci_pdata,
+					       sizeof(ohci_pdata));
+	else
+		ret = platform_device_add_data(hci_dev, &ehci_pdata,
+					       sizeof(ehci_pdata));
+	if (ret)
+		goto err_alloc;
+	ret = platform_device_add(hci_dev);
+	if (ret)
+		goto err_alloc;
+
+	return hci_dev;
+
+err_alloc:
+	platform_device_put(hci_dev);
+	return ERR_PTR(ret);
+}
+
+static int __devinit ssb_hcd_probe(struct ssb_device *dev,
+				   const struct ssb_device_id *id)
+{
+	int err, tmp;
+	int start, len;
+	u16 chipid_top;
+	u16 coreid = dev->id.coreid;
+	struct ssb_hcd_device *usb_dev;
+
+	/* USBcores are only connected on embedded devices. */
+	chipid_top = (dev->bus->chip_id & 0xFF00);
+	if (chipid_top != 0x4700 && chipid_top != 0x5300)
+		return -ENODEV;
+
+	/* TODO: Probably need checks here; is the core connected? */
+
+	if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
+	    dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
+		return -EOPNOTSUPP;
+
+	usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL);
+	if (!usb_dev)
+		return -ENOMEM;
+
+	/* We currently always attach SSB_DEV_USB11_HOSTDEV
+	 * as HOST OHCI. If we want to attach it as Client device,
+	 * we must branch here and call into the (yet to
+	 * be written) Client mode driver. Same for remove(). */
+	usb_dev->enable_flags = ssb_hcd_init_chip(dev);
+
+	tmp = ssb_read32(dev, SSB_ADMATCH0);
+
+	start = ssb_admatch_base(tmp);
+	len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp);
+	usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len);
+	if (IS_ERR(usb_dev->ohci_dev)) {
+		err = PTR_ERR(usb_dev->ohci_dev);
+		goto err_free_usb_dev;
+	}
+
+	if (coreid == SSB_DEV_USB20_HOST) {
+		start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */
+		usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, false, start, len);
+		if (IS_ERR(usb_dev->ehci_dev)) {
+			err = PTR_ERR(usb_dev->ehci_dev);
+			goto err_unregister_ohci_dev;
+		}
+	}
+
+	ssb_set_drvdata(dev, usb_dev);
+	return 0;
+
+err_unregister_ohci_dev:
+	platform_device_unregister(usb_dev->ohci_dev);
+err_free_usb_dev:
+	kfree(usb_dev);
+	return err;
+}
+
+static void __devexit ssb_hcd_remove(struct ssb_device *dev)
+{
+	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
+	struct platform_device *ohci_dev = usb_dev->ohci_dev;
+	struct platform_device *ehci_dev = usb_dev->ehci_dev;
+
+	if (ohci_dev)
+		platform_device_unregister(ohci_dev);
+	if (ehci_dev)
+		platform_device_unregister(ehci_dev);
+
+	ssb_device_disable(dev, 0);
+}
+
+static void __devexit ssb_hcd_shutdown(struct ssb_device *dev)
+{
+	ssb_device_disable(dev, 0);
+}
+
+#ifdef CONFIG_PM
+
+static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state)
+{
+	ssb_device_disable(dev, 0);
+
+	return 0;
+}
+
+static int ssb_hcd_resume(struct ssb_device *dev)
+{
+	struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev);
+
+	ssb_device_enable(dev, usb_dev->enable_flags);
+
+	return 0;
+}
+
+#else /* !CONFIG_PM */
+#define ssb_hcd_suspend	NULL
+#define ssb_hcd_resume	NULL
+#endif /* CONFIG_PM */
+
+static const struct ssb_device_id ssb_hcd_table[] __devinitconst = {
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
+	SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
+	SSB_DEVTABLE_END
+};
+MODULE_DEVICE_TABLE(ssb, ssb_hcd_table);
+
+static struct ssb_driver ssb_hcd_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= ssb_hcd_table,
+	.probe		= ssb_hcd_probe,
+	.remove		= __devexit_p(ssb_hcd_remove),
+	.shutdown	= ssb_hcd_shutdown,
+	.suspend	= ssb_hcd_suspend,
+	.resume		= ssb_hcd_resume,
+};
+
+static int __init ssb_hcd_init(void)
+{
+	return ssb_driver_register(&ssb_hcd_driver);
+}
+module_init(ssb_hcd_init);
+
+static void __exit ssb_hcd_exit(void)
+{
+	ssb_driver_unregister(&ssb_hcd_driver);
+}
+module_exit(ssb_hcd_exit);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 673ad120c43e..2732ef660c5c 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -475,6 +475,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	struct xhci_bus_state *bus_state;
 	u16 link_state = 0;
 	u16 wake_mask = 0;
+	u16 timeout = 0;
 
 	max_ports = xhci_get_ports(hcd, &port_array);
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -558,6 +559,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				xhci_dbg(xhci, "Resume USB2 port %d\n",
 					wIndex + 1);
 				bus_state->resume_done[wIndex] = 0;
+				clear_bit(wIndex, &bus_state->resuming_ports);
 				xhci_set_link_state(xhci, port_array, wIndex,
 							XDEV_U0);
 				xhci_dbg(xhci, "set port %d resume\n",
@@ -622,6 +624,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			link_state = (wIndex & 0xff00) >> 3;
 		if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
 			wake_mask = wIndex & 0xff00;
+		/* The MSB of wIndex is the U1/U2 timeout */
+		timeout = (wIndex & 0xff00) >> 8;
 		wIndex &= 0xff;
 		if (!wIndex || wIndex > max_ports)
 			goto error;
@@ -746,6 +750,22 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 			temp = xhci_readl(xhci, port_array[wIndex]);
 			break;
+		case USB_PORT_FEAT_U1_TIMEOUT:
+			if (hcd->speed != HCD_USB3)
+				goto error;
+			temp = xhci_readl(xhci, port_array[wIndex] + 1);
+			temp &= ~PORT_U1_TIMEOUT_MASK;
+			temp |= PORT_U1_TIMEOUT(timeout);
+			xhci_writel(xhci, temp, port_array[wIndex] + 1);
+			break;
+		case USB_PORT_FEAT_U2_TIMEOUT:
+			if (hcd->speed != HCD_USB3)
+				goto error;
+			temp = xhci_readl(xhci, port_array[wIndex] + 1);
+			temp &= ~PORT_U2_TIMEOUT_MASK;
+			temp |= PORT_U2_TIMEOUT(timeout);
+			xhci_writel(xhci, temp, port_array[wIndex] + 1);
+			break;
 		default:
 			goto error;
 		}
@@ -845,7 +865,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	/* Initial status is no changes */
 	retval = (max_ports + 8) / 8;
 	memset(buf, 0, retval);
-	status = 0;
+
+	/*
+	 * Inform the usbcore about resume-in-progress by returning
+	 * a non-zero value even if there are no status changes.
+	 */
+	status = bus_state->resuming_ports;
 
 	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
 
@@ -885,15 +910,11 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	spin_lock_irqsave(&xhci->lock, flags);
 
 	if (hcd->self.root_hub->do_remote_wakeup) {
-		port_index = max_ports;
-		while (port_index--) {
-			if (bus_state->resume_done[port_index] != 0) {
-				spin_unlock_irqrestore(&xhci->lock, flags);
-				xhci_dbg(xhci, "suspend failed because "
-						"port %d is resuming\n",
-						port_index + 1);
-				return -EBUSY;
-			}
+		if (bus_state->resuming_ports) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_dbg(xhci, "suspend failed because "
+						"a port is resuming\n");
+			return -EBUSY;
 		}
 	}
 
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 68eaa908ac8e..ec4338eec826 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1791,6 +1791,14 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	struct dev_info	*dev_info, *next;
+	struct list_head *tt_list_head;
+	struct list_head *tt;
+	struct list_head *endpoints;
+	struct list_head *ep, *q;
+	struct xhci_tt_bw_info *tt_info;
+	struct xhci_interval_bw_table *bwt;
+	struct xhci_virt_ep *virt_ep;
+
 	unsigned long	flags;
 	int size;
 	int i;
@@ -1807,6 +1815,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->event_ring = NULL;
 	xhci_dbg(xhci, "Freed event ring\n");
 
+	if (xhci->lpm_command)
+		xhci_free_command(xhci, xhci->lpm_command);
+	xhci->cmd_ring_reserved_trbs = 0;
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
@@ -1849,8 +1860,26 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
+	bwt = &xhci->rh_bw->bw_table;
+	for (i = 0; i < XHCI_MAX_INTERVAL; i++) {
+		endpoints = &bwt->interval_bw[i].endpoints;
+		list_for_each_safe(ep, q, endpoints) {
+			virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list);
+			list_del(&virt_ep->bw_endpoint_list);
+			kfree(virt_ep);
+		}
+	}
+
+	tt_list_head = &xhci->rh_bw->tts;
+	list_for_each_safe(tt, q, tt_list_head) {
+		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
+		list_del(tt);
+		kfree(tt_info);
+	}
+
 	xhci->num_usb2_ports = 0;
 	xhci->num_usb3_ports = 0;
+	xhci->num_active_eps = 0;
 	kfree(xhci->usb2_ports);
 	kfree(xhci->usb3_ports);
 	kfree(xhci->port_array);
@@ -2350,6 +2379,16 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
 	xhci_dbg_cmd_ptrs(xhci);
 
+	xhci->lpm_command = xhci_alloc_command(xhci, true, true, flags);
+	if (!xhci->lpm_command)
+		goto fail;
+
+	/* Reserve one command ring TRB for disabling LPM.
+	 * Since the USB core grabs the shared usb_bus bandwidth mutex before
+	 * disabling LPM, we only need to reserve one TRB for all devices.
+	 */
+	xhci->cmd_ring_reserved_trbs++;
+
 	val = xhci_readl(xhci, &xhci->cap_regs->db_off);
 	val &= DBOFF_MASK;
 	xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x"
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 7a856a767e77..18b231b0c5d3 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -72,6 +72,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
 				"has broken MSI implementation\n",
 				pdev->revision);
+		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
@@ -83,6 +84,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	/* AMD PLL quirk */
 	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+		xhci->quirks |= XHCI_LPM_SUPPORT;
+		xhci->quirks |= XHCI_INTEL_HOST;
+	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
 		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
@@ -169,6 +174,13 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (retval)
 		goto put_usb3_hcd;
 	/* Roothub already marked as USB 3.0 speed */
+
+	/* We know the LPM timeout algorithms for this host, let the USB core
+	 * enable and disable LPM for devices under the USB 3.0 roothub.
+	 */
+	if (xhci->quirks & XHCI_LPM_SUPPORT)
+		hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1;
+
 	return 0;
 
 put_usb3_hcd:
@@ -292,6 +304,8 @@ static const struct hc_driver xhci_pci_hc_driver = {
 	 */
 	.update_device =        xhci_update_device,
 	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
+	.enable_usb3_lpm_timeout =	xhci_enable_usb3_lpm_timeout,
+	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 3d9422f16a20..23b4aefd1036 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1377,6 +1377,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 			xhci_dbg(xhci, "resume HS port %d\n", port_id);
 			bus_state->resume_done[faked_port_index] = jiffies +
 				msecs_to_jiffies(20);
+			set_bit(faked_port_index, &bus_state->resuming_ports);
 			mod_timer(&hcd->rh_timer,
 				  bus_state->resume_done[faked_port_index]);
 			/* Do the rest in GetPortStatus */
@@ -1786,8 +1787,12 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	/* handle completion code */
 	switch (trb_comp_code) {
 	case COMP_SUCCESS:
-		frame->status = 0;
-		break;
+		if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
+			frame->status = 0;
+			break;
+		}
+		if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
+			trb_comp_code = COMP_SHORT_TX;
 	case COMP_SHORT_TX:
 		frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
 				-EREMOTEIO : 0;
@@ -1803,6 +1808,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		break;
 	case COMP_DEV_ERR:
 	case COMP_STALL:
+	case COMP_TX_ERR:
 		frame->status = -EPROTO;
 		skip_td = true;
 		break;
@@ -1883,13 +1889,16 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	switch (trb_comp_code) {
 	case COMP_SUCCESS:
 		/* Double check that the HW transferred everything. */
-		if (event_trb != td->last_trb) {
+		if (event_trb != td->last_trb ||
+				TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
 			xhci_warn(xhci, "WARN Successful completion "
 					"on short TX\n");
 			if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
 				*status = -EREMOTEIO;
 			else
 				*status = 0;
+			if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
+				trb_comp_code = COMP_SHORT_TX;
 		} else {
 			*status = 0;
 		}
@@ -2048,6 +2057,13 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	 * transfer type
 	 */
 	case COMP_SUCCESS:
+		if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
+			break;
+		if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
+			trb_comp_code = COMP_SHORT_TX;
+		else
+			xhci_warn(xhci, "WARN Successful completion on short TX: "
+					"needs XHCI_TRUST_TX_LENGTH quirk?\n");
 	case COMP_SHORT_TX:
 		break;
 	case COMP_STOP:
@@ -2270,7 +2286,7 @@ cleanup:
 					(status != 0 &&
 					 !usb_endpoint_xfer_isoc(&urb->ep->desc)))
 				xhci_dbg(xhci, "Giveback URB %p, len = %d, "
-						"expected = %x, status = %d\n",
+						"expected = %d, status = %d\n",
 						urb, urb->actual_length,
 						urb->transfer_buffer_length,
 						status);
@@ -3593,12 +3609,12 @@ int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 
 /* Queue an evaluate context command TRB */
 int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
-		u32 slot_id)
+		u32 slot_id, bool command_must_succeed)
 {
 	return queue_command(xhci, lower_32_bits(in_ctx_ptr),
 			upper_32_bits(in_ctx_ptr), 0,
 			TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
-			false);
+			command_must_succeed);
 }
 
 /*
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 36641a7f2371..afdc73ee84a6 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -152,7 +152,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 {
 	u32 command;
 	u32 state;
-	int ret;
+	int ret, i;
 
 	state = xhci_readl(xhci, &xhci->op_regs->status);
 	if ((state & STS_HALT) == 0) {
@@ -175,7 +175,15 @@ int xhci_reset(struct xhci_hcd *xhci)
 	 * xHCI cannot write to any doorbells or operational registers other
 	 * than status until the "Controller Not Ready" flag is cleared.
 	 */
-	return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
+	ret = handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
+
+	for (i = 0; i < 2; ++i) {
+		xhci->bus_state[i].port_c_suspend = 0;
+		xhci->bus_state[i].suspended_ports = 0;
+		xhci->bus_state[i].resuming_ports = 0;
+	}
+
+	return ret;
 }
 
 #ifdef CONFIG_PCI
@@ -2438,7 +2446,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 				udev->slot_id, must_succeed);
 	else
 		ret = xhci_queue_evaluate_context(xhci, in_ctx->dma,
-				udev->slot_id);
+				udev->slot_id, must_succeed);
 	if (ret < 0) {
 		if (command)
 			list_del(&command->cmd_list);
@@ -3863,6 +3871,474 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
 
 #endif /* CONFIG_USB_SUSPEND */
 
+/*---------------------- USB 3.0 Link PM functions ------------------------*/
+
+#ifdef CONFIG_PM
+/* Service interval in nanoseconds = 2^(bInterval - 1) * 125us * 1000ns / 1us */
+static unsigned long long xhci_service_interval_to_ns(
+		struct usb_endpoint_descriptor *desc)
+{
+	return (1 << (desc->bInterval - 1)) * 125 * 1000;
+}
+
+static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	unsigned long long sel;
+	unsigned long long pel;
+	unsigned int max_sel_pel;
+	char *state_name;
+
+	switch (state) {
+	case USB3_LPM_U1:
+		/* Convert SEL and PEL stored in nanoseconds to microseconds */
+		sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+		pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);
+		max_sel_pel = USB3_LPM_MAX_U1_SEL_PEL;
+		state_name = "U1";
+		break;
+	case USB3_LPM_U2:
+		sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+		pel = DIV_ROUND_UP(udev->u2_params.pel, 1000);
+		max_sel_pel = USB3_LPM_MAX_U2_SEL_PEL;
+		state_name = "U2";
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	if (sel <= max_sel_pel && pel <= max_sel_pel)
+		return USB3_LPM_DEVICE_INITIATED;
+
+	if (sel > max_sel_pel)
+		dev_dbg(&udev->dev, "Device-initiated %s disabled "
+				"due to long SEL %llu ms\n",
+				state_name, sel);
+	else
+		dev_dbg(&udev->dev, "Device-initiated %s disabled "
+				"due to long PEL %llu\n ms",
+				state_name, pel);
+	return USB3_LPM_DISABLED;
+}
+
+/* Returns the hub-encoded U1 timeout value.
+ * The U1 timeout should be the maximum of the following values:
+ *  - For control endpoints, U1 system exit latency (SEL) * 3
+ *  - For bulk endpoints, U1 SEL * 5
+ *  - For interrupt endpoints:
+ *    - Notification EPs, U1 SEL * 3
+ *    - Periodic EPs, max(105% of bInterval, U1 SEL * 2)
+ *  - For isochronous endpoints, max(105% of bInterval, U1 SEL * 2)
+ */
+static u16 xhci_calculate_intel_u1_timeout(struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc)
+{
+	unsigned long long timeout_ns;
+	int ep_type;
+	int intr_type;
+
+	ep_type = usb_endpoint_type(desc);
+	switch (ep_type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		timeout_ns = udev->u1_params.sel * 3;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		timeout_ns = udev->u1_params.sel * 5;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		intr_type = usb_endpoint_interrupt_type(desc);
+		if (intr_type == USB_ENDPOINT_INTR_NOTIFICATION) {
+			timeout_ns = udev->u1_params.sel * 3;
+			break;
+		}
+		/* Otherwise the calculation is the same as isoc eps */
+	case USB_ENDPOINT_XFER_ISOC:
+		timeout_ns = xhci_service_interval_to_ns(desc);
+		timeout_ns = DIV_ROUND_UP_ULL(timeout_ns * 105, 100);
+		if (timeout_ns < udev->u1_params.sel * 2)
+			timeout_ns = udev->u1_params.sel * 2;
+		break;
+	default:
+		return 0;
+	}
+
+	/* The U1 timeout is encoded in 1us intervals. */
+	timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 1000);
+	/* Don't return a timeout of zero, because that's USB3_LPM_DISABLED. */
+	if (timeout_ns == USB3_LPM_DISABLED)
+		timeout_ns++;
+
+	/* If the necessary timeout value is bigger than what we can set in the
+	 * USB 3.0 hub, we have to disable hub-initiated U1.
+	 */
+	if (timeout_ns <= USB3_LPM_U1_MAX_TIMEOUT)
+		return timeout_ns;
+	dev_dbg(&udev->dev, "Hub-initiated U1 disabled "
+			"due to long timeout %llu ms\n", timeout_ns);
+	return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U1);
+}
+
+/* Returns the hub-encoded U2 timeout value.
+ * The U2 timeout should be the maximum of:
+ *  - 10 ms (to avoid the bandwidth impact on the scheduler)
+ *  - largest bInterval of any active periodic endpoint (to avoid going
+ *    into lower power link states between intervals).
+ *  - the U2 Exit Latency of the device
+ */
+static u16 xhci_calculate_intel_u2_timeout(struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc)
+{
+	unsigned long long timeout_ns;
+	unsigned long long u2_del_ns;
+
+	timeout_ns = 10 * 1000 * 1000;
+
+	if ((usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) &&
+			(xhci_service_interval_to_ns(desc) > timeout_ns))
+		timeout_ns = xhci_service_interval_to_ns(desc);
+
+	u2_del_ns = udev->bos->ss_cap->bU2DevExitLat * 1000;
+	if (u2_del_ns > timeout_ns)
+		timeout_ns = u2_del_ns;
+
+	/* The U2 timeout is encoded in 256us intervals */
+	timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
+	/* If the necessary timeout value is bigger than what we can set in the
+	 * USB 3.0 hub, we have to disable hub-initiated U2.
+	 */
+	if (timeout_ns <= USB3_LPM_U2_MAX_TIMEOUT)
+		return timeout_ns;
+	dev_dbg(&udev->dev, "Hub-initiated U2 disabled "
+			"due to long timeout %llu ms\n", timeout_ns);
+	return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U2);
+}
+
+static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc,
+		enum usb3_link_state state,
+		u16 *timeout)
+{
+	if (state == USB3_LPM_U1) {
+		if (xhci->quirks & XHCI_INTEL_HOST)
+			return xhci_calculate_intel_u1_timeout(udev, desc);
+	} else {
+		if (xhci->quirks & XHCI_INTEL_HOST)
+			return xhci_calculate_intel_u2_timeout(udev, desc);
+	}
+
+	return USB3_LPM_DISABLED;
+}
+
+static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc,
+		enum usb3_link_state state,
+		u16 *timeout)
+{
+	u16 alt_timeout;
+
+	alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev,
+		desc, state, timeout);
+
+	/* If we found we can't enable hub-initiated LPM, or
+	 * the U1 or U2 exit latency was too high to allow
+	 * device-initiated LPM as well, just stop searching.
+	 */
+	if (alt_timeout == USB3_LPM_DISABLED ||
+			alt_timeout == USB3_LPM_DEVICE_INITIATED) {
+		*timeout = alt_timeout;
+		return -E2BIG;
+	}
+	if (alt_timeout > *timeout)
+		*timeout = alt_timeout;
+	return 0;
+}
+
+static int xhci_update_timeout_for_interface(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_host_interface *alt,
+		enum usb3_link_state state,
+		u16 *timeout)
+{
+	int j;
+
+	for (j = 0; j < alt->desc.bNumEndpoints; j++) {
+		if (xhci_update_timeout_for_endpoint(xhci, udev,
+					&alt->endpoint[j].desc, state, timeout))
+			return -E2BIG;
+		continue;
+	}
+	return 0;
+}
+
+static int xhci_check_intel_tier_policy(struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	struct usb_device *parent;
+	unsigned int num_hubs;
+
+	if (state == USB3_LPM_U2)
+		return 0;
+
+	/* Don't enable U1 if the device is on a 2nd tier hub or lower. */
+	for (parent = udev->parent, num_hubs = 0; parent->parent;
+			parent = parent->parent)
+		num_hubs++;
+
+	if (num_hubs < 2)
+		return 0;
+
+	dev_dbg(&udev->dev, "Disabling U1 link state for device"
+			" below second-tier hub.\n");
+	dev_dbg(&udev->dev, "Plug device into first-tier hub "
+			"to decrease power consumption.\n");
+	return -E2BIG;
+}
+
+static int xhci_check_tier_policy(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		return xhci_check_intel_tier_policy(udev, state);
+	return -EINVAL;
+}
+
+/* Returns the U1 or U2 timeout that should be enabled.
+ * If the tier check or timeout setting functions return with a non-zero exit
+ * code, that means the timeout value has been finalized and we shouldn't look
+ * at any more endpoints.
+ */
+static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct usb_host_config *config;
+	char *state_name;
+	int i;
+	u16 timeout = USB3_LPM_DISABLED;
+
+	if (state == USB3_LPM_U1)
+		state_name = "U1";
+	else if (state == USB3_LPM_U2)
+		state_name = "U2";
+	else {
+		dev_warn(&udev->dev, "Can't enable unknown link state %i\n",
+				state);
+		return timeout;
+	}
+
+	if (xhci_check_tier_policy(xhci, udev, state) < 0)
+		return timeout;
+
+	/* Gather some information about the currently installed configuration
+	 * and alternate interface settings.
+	 */
+	if (xhci_update_timeout_for_endpoint(xhci, udev, &udev->ep0.desc,
+			state, &timeout))
+		return timeout;
+
+	config = udev->actconfig;
+	if (!config)
+		return timeout;
+
+	for (i = 0; i < USB_MAXINTERFACES; i++) {
+		struct usb_driver *driver;
+		struct usb_interface *intf = config->interface[i];
+
+		if (!intf)
+			continue;
+
+		/* Check if any currently bound drivers want hub-initiated LPM
+		 * disabled.
+		 */
+		if (intf->dev.driver) {
+			driver = to_usb_driver(intf->dev.driver);
+			if (driver && driver->disable_hub_initiated_lpm) {
+				dev_dbg(&udev->dev, "Hub-initiated %s disabled "
+						"at request of driver %s\n",
+						state_name, driver->name);
+				return xhci_get_timeout_no_hub_lpm(udev, state);
+			}
+		}
+
+		/* Not sure how this could happen... */
+		if (!intf->cur_altsetting)
+			continue;
+
+		if (xhci_update_timeout_for_interface(xhci, udev,
+					intf->cur_altsetting,
+					state, &timeout))
+			return timeout;
+	}
+	return timeout;
+}
+
+/*
+ * Issue an Evaluate Context command to change the Maximum Exit Latency in the
+ * slot context.  If that succeeds, store the new MEL in the xhci_virt_device.
+ */
+static int xhci_change_max_exit_latency(struct xhci_hcd *xhci,
+			struct usb_device *udev, u16 max_exit_latency)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *command;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return 0;
+	}
+
+	/* Attempt to issue an Evaluate Context command to change the MEL. */
+	virt_dev = xhci->devs[udev->slot_id];
+	command = xhci->lpm_command;
+	xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
+	slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT));
+	slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency);
+
+	xhci_dbg(xhci, "Set up evaluate context for LPM MEL change.\n");
+	xhci_dbg(xhci, "Slot %u Input Context:\n", udev->slot_id);
+	xhci_dbg_ctx(xhci, command->in_ctx, 0);
+
+	/* Issue and wait for the evaluate context command. */
+	ret = xhci_configure_endpoint(xhci, udev, command,
+			true, true);
+	xhci_dbg(xhci, "Slot %u Output Context:\n", udev->slot_id);
+	xhci_dbg_ctx(xhci, virt_dev->out_ctx, 0);
+
+	if (!ret) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		virt_dev->current_mel = max_exit_latency;
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+	return ret;
+}
+
+static int calculate_max_exit_latency(struct usb_device *udev,
+		enum usb3_link_state state_changed,
+		u16 hub_encoded_timeout)
+{
+	unsigned long long u1_mel_us = 0;
+	unsigned long long u2_mel_us = 0;
+	unsigned long long mel_us = 0;
+	bool disabling_u1;
+	bool disabling_u2;
+	bool enabling_u1;
+	bool enabling_u2;
+
+	disabling_u1 = (state_changed == USB3_LPM_U1 &&
+			hub_encoded_timeout == USB3_LPM_DISABLED);
+	disabling_u2 = (state_changed == USB3_LPM_U2 &&
+			hub_encoded_timeout == USB3_LPM_DISABLED);
+
+	enabling_u1 = (state_changed == USB3_LPM_U1 &&
+			hub_encoded_timeout != USB3_LPM_DISABLED);
+	enabling_u2 = (state_changed == USB3_LPM_U2 &&
+			hub_encoded_timeout != USB3_LPM_DISABLED);
+
+	/* If U1 was already enabled and we're not disabling it,
+	 * or we're going to enable U1, account for the U1 max exit latency.
+	 */
+	if ((udev->u1_params.timeout != USB3_LPM_DISABLED && !disabling_u1) ||
+			enabling_u1)
+		u1_mel_us = DIV_ROUND_UP(udev->u1_params.mel, 1000);
+	if ((udev->u2_params.timeout != USB3_LPM_DISABLED && !disabling_u2) ||
+			enabling_u2)
+		u2_mel_us = DIV_ROUND_UP(udev->u2_params.mel, 1000);
+
+	if (u1_mel_us > u2_mel_us)
+		mel_us = u1_mel_us;
+	else
+		mel_us = u2_mel_us;
+	/* xHCI host controller max exit latency field is only 16 bits wide. */
+	if (mel_us > MAX_EXIT) {
+		dev_warn(&udev->dev, "Link PM max exit latency of %lluus "
+				"is too big.\n", mel_us);
+		return -E2BIG;
+	}
+	return mel_us;
+}
+
+/* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
+int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	struct xhci_hcd	*xhci;
+	u16 hub_encoded_timeout;
+	int mel;
+	int ret;
+
+	xhci = hcd_to_xhci(hcd);
+	/* The LPM timeout values are pretty host-controller specific, so don't
+	 * enable hub-initiated timeouts unless the vendor has provided
+	 * information about their timeout algorithm.
+	 */
+	if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) ||
+			!xhci->devs[udev->slot_id])
+		return USB3_LPM_DISABLED;
+
+	hub_encoded_timeout = xhci_calculate_lpm_timeout(hcd, udev, state);
+	mel = calculate_max_exit_latency(udev, state, hub_encoded_timeout);
+	if (mel < 0) {
+		/* Max Exit Latency is too big, disable LPM. */
+		hub_encoded_timeout = USB3_LPM_DISABLED;
+		mel = 0;
+	}
+
+	ret = xhci_change_max_exit_latency(xhci, udev, mel);
+	if (ret)
+		return ret;
+	return hub_encoded_timeout;
+}
+
+int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	struct xhci_hcd	*xhci;
+	u16 mel;
+	int ret;
+
+	xhci = hcd_to_xhci(hcd);
+	if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) ||
+			!xhci->devs[udev->slot_id])
+		return 0;
+
+	mel = calculate_max_exit_latency(udev, state, USB3_LPM_DISABLED);
+	ret = xhci_change_max_exit_latency(xhci, udev, mel);
+	if (ret)
+		return ret;
+	return 0;
+}
+#else /* CONFIG_PM */
+
+int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	return USB3_LPM_DISABLED;
+}
+
+int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	return 0;
+}
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
 /* Once a hub descriptor is fetched for a device, we need to update the xHC's
  * internal data structures for the device.
  */
@@ -4090,7 +4566,6 @@ static int __init xhci_hcd_init(void)
 	BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
 	/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
 	BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
-	BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
 	return 0;
 unreg_pci:
 	xhci_unregister_pci();
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3d69c4b2b542..de3d6e3e57be 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -362,8 +362,10 @@ struct xhci_op_regs {
  * Timeout can be up to 127us.  0xFF means an infinite timeout.
  */
 #define PORT_U1_TIMEOUT(p)	((p) & 0xff)
+#define PORT_U1_TIMEOUT_MASK	0xff
 /* Inactivity timer value for transitions into U2 */
 #define PORT_U2_TIMEOUT(p)	(((p) & 0xff) << 8)
+#define PORT_U2_TIMEOUT_MASK	(0xff << 8)
 /* Bits 24:31 for port testing */
 
 /* USB2 Protocol PORTSPMSC */
@@ -914,6 +916,8 @@ struct xhci_virt_device {
 	u8				real_port;
 	struct xhci_interval_bw_table	*bw_table;
 	struct xhci_tt_bw_info		*tt_info;
+	/* The current max exit latency for the enabled USB3 link states. */
+	u16				current_mel;
 };
 
 /*
@@ -1362,6 +1366,8 @@ struct xhci_bus_state {
 	u32			suspended_ports;
 	u32			port_remote_wakeup;
 	unsigned long		resume_done[USB_MAXCHILDREN];
+	/* which ports have started to resume */
+	unsigned long		resuming_ports;
 };
 
 static inline unsigned int hcd_index(struct usb_hcd *hcd)
@@ -1422,6 +1428,8 @@ struct xhci_hcd {
 	/* slot enabling and address device helpers */
 	struct completion	addr_dev;
 	int slot_id;
+	/* For USB 3.0 LPM enable/disable. */
+	struct xhci_command		*lpm_command;
 	/* Internal mirror of the HW's dcbaa */
 	struct xhci_virt_device	*devs[MAX_HC_SLOTS];
 	/* For keeping track of bandwidth domains per roothub. */
@@ -1479,6 +1487,9 @@ struct xhci_hcd {
 #define XHCI_RESET_ON_RESUME	(1 << 7)
 #define	XHCI_SW_BW_CHECKING	(1 << 8)
 #define XHCI_AMD_0x96_HOST	(1 << 9)
+#define XHCI_TRUST_TX_LENGTH	(1 << 10)
+#define XHCI_LPM_SUPPORT	(1 << 11)
+#define XHCI_INTEL_HOST		(1 << 12)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
@@ -1752,7 +1763,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id, bool command_must_succeed);
 int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
-		u32 slot_id);
+		u32 slot_id, bool command_must_succeed);
 int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index);
 int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id);
@@ -1776,6 +1787,10 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
 /* xHCI roothub code */
 void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 				int port_id, u32 link_state);
+int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state);
+int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state);
 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 				int port_id, u32 port_bit);
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index 575b56c79e97..7121b50098d3 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -284,18 +284,16 @@ static void mdc800_usb_irq (struct urb *urb)
 	int data_received=0, wake_up;
 	unsigned char* b=urb->transfer_buffer;
 	struct mdc800_data* mdc800=urb->context;
+	struct device *dev = &mdc800->dev->dev;
 	int status = urb->status;
 
 	if (status >= 0) {
-
-		//dbg ("%i %i %i %i %i %i %i %i \n",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]);
-
 		if (mdc800_isBusy (b))
 		{
 			if (!mdc800->camera_busy)
 			{
 				mdc800->camera_busy=1;
-				dbg ("gets busy");
+				dev_dbg(dev, "gets busy\n");
 			}
 		}
 		else
@@ -303,13 +301,13 @@ static void mdc800_usb_irq (struct urb *urb)
 			if (mdc800->camera_busy && mdc800_isReady (b))
 			{
 				mdc800->camera_busy=0;
-				dbg ("gets ready");
+				dev_dbg(dev, "gets ready\n");
 			}
 		}
 		if (!(mdc800_isBusy (b) || mdc800_isReady (b)))
 		{
 			/* Store Data in camera_answer field */
-			dbg ("%i %i %i %i %i %i %i %i ",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]);
+			dev_dbg(dev, "%i %i %i %i %i %i %i %i \n",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]);
 
 			memcpy (mdc800->camera_response,b,8);
 			data_received=1;
@@ -441,7 +439,7 @@ static int mdc800_usb_probe (struct usb_interface *intf,
 	int irq_interval=0;
 	int retval;
 
-	dbg ("(mdc800_usb_probe) called.");
+	dev_dbg(&intf->dev, "(%s) called.\n", __func__);
 
 
 	if (mdc800->dev != NULL)
@@ -554,7 +552,7 @@ static void mdc800_usb_disconnect (struct usb_interface *intf)
 {
 	struct mdc800_data* mdc800 = usb_get_intfdata(intf);
 
-	dbg ("(mdc800_usb_disconnect) called");
+	dev_dbg(&intf->dev, "(%s) called\n", __func__);
 
 	if (mdc800) {
 		if (mdc800->state == NOT_CONNECTED)
@@ -656,7 +654,7 @@ static int mdc800_device_open (struct inode* inode, struct file *file)
 	}
 
 	mdc800->open=1;
-	dbg ("Mustek MDC800 device opened.");
+	dev_dbg(&mdc800->dev->dev, "Mustek MDC800 device opened.\n");
 
 error_out:
 	mutex_unlock(&mdc800->io_lock);
@@ -670,7 +668,6 @@ error_out:
 static int mdc800_device_release (struct inode* inode, struct file *file)
 {
 	int retval=0;
-	dbg ("Mustek MDC800 device closed.");
 
 	mutex_lock(&mdc800->io_lock);
 	if (mdc800->open && (mdc800->state != NOT_CONNECTED))
@@ -927,7 +924,7 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
 						{
 							mdc800->pic_len=(int) 65536*(unsigned char) mdc800->camera_response[0]+256*(unsigned char) mdc800->camera_response[1]+(unsigned char) mdc800->camera_response[2];
 
-							dbg ("cached imagesize = %i",mdc800->pic_len);
+							dev_dbg(&mdc800->dev->dev, "cached imagesize = %i\n", mdc800->pic_len);
 						}
 
 					}
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index ac0d75a9005a..0fc6e5fc745f 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -88,6 +88,7 @@ static struct workqueue_struct *wq;
 static void appledisplay_complete(struct urb *urb)
 {
 	struct appledisplay *pdata = urb->context;
+	struct device *dev = &pdata->udev->dev;
 	unsigned long flags;
 	int status = urb->status;
 	int retval;
@@ -97,18 +98,18 @@ static void appledisplay_complete(struct urb *urb)
 		/* success */
 		break;
 	case -EOVERFLOW:
-		printk(KERN_ERR "appletouch: OVERFLOW with data "
-			"length %d, actual length is %d\n",
+		dev_err(dev,
+			"OVERFLOW with data length %d, actual length is %d\n",
 			ACD_URB_BUFFER_LEN, pdata->urb->actual_length);
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* This urb is terminated, clean up */
-		dbg("%s - urb shuttingdown with status: %d",
+		dev_dbg(dev, "%s - urb shuttingdown with status: %d\n",
 			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d",
+		dev_dbg(dev, "%s - nonzero urb status received: %d/n",
 			__func__, status);
 		goto exit;
 	}
@@ -132,8 +133,7 @@ static void appledisplay_complete(struct urb *urb)
 exit:
 	retval = usb_submit_urb(pdata->urb, GFP_ATOMIC);
 	if (retval) {
-		dev_err(&pdata->udev->dev,
-			"%s - usb_submit_urb failed with result %d\n",
+		dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
 			__func__, retval);
 	}
 }
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index da97dcec1f32..d65984dee751 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -78,18 +78,14 @@ static int emi26_load_firmware (struct usb_device *dev)
 	const struct firmware *bitstream_fw = NULL;
 	const struct firmware *firmware_fw = NULL;
 	const struct ihex_binrec *rec;
-	int err;
+	int err = -ENOMEM;
 	int i;
 	__u32 addr;	/* Address to write */
 	__u8 *buf;
 
 	buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
-	if (!buf) {
-		dev_err(&dev->dev, "%s - error loading firmware: error = %d\n",
-			__func__, -ENOMEM);
-		err = -ENOMEM;
+	if (!buf)
 		goto wraperr;
-	}
 
 	err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev);
 	if (err)
@@ -111,11 +107,8 @@ static int emi26_load_firmware (struct usb_device *dev)
 
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi26_set_reset(dev,1);
-	if (err < 0) {
-		dev_err(&dev->dev,"%s - error loading firmware: error = %d\n",
-			__func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 
 	rec = (const struct ihex_binrec *)loader_fw->data;
 	/* 1. We need to put the loader for the FPGA into the EZ-USB */
@@ -123,19 +116,15 @@ static int emi26_load_firmware (struct usb_device *dev)
 		err = emi26_writememory(dev, be32_to_cpu(rec->addr),
 					rec->data, be16_to_cpu(rec->len),
 					ANCHOR_LOAD_INTERNAL);
-		if (err < 0) {
-			err("%s - error loading firmware: error = %d", __func__, err);
+		if (err < 0)
 			goto wraperr;
-		}
 		rec = ihex_next_binrec(rec);
 	}
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
@@ -153,18 +142,14 @@ static int emi26_load_firmware (struct usb_device *dev)
 			rec = ihex_next_binrec(rec);
 		}
 		err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
-		if (err < 0) {
-			err("%s - error loading firmware: error = %d", __func__, err);
+		if (err < 0)
 			goto wraperr;
-		}
 	} while (rec);
 
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi26_set_reset(dev,1);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 
 	/* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
 	for (rec = (const struct ihex_binrec *)loader_fw->data;
@@ -172,19 +157,15 @@ static int emi26_load_firmware (struct usb_device *dev)
 		err = emi26_writememory(dev, be32_to_cpu(rec->addr),
 					rec->data, be16_to_cpu(rec->len),
 					ANCHOR_LOAD_INTERNAL);
-		if (err < 0) {
-			err("%s - error loading firmware: error = %d", __func__, err);
+		if (err < 0)
 			goto wraperr;
-		}
 	}
 	msleep(250);	/* let device settle */
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 
 	/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
 
@@ -194,19 +175,15 @@ static int emi26_load_firmware (struct usb_device *dev)
 			err = emi26_writememory(dev, be32_to_cpu(rec->addr),
 						rec->data, be16_to_cpu(rec->len),
 						ANCHOR_LOAD_EXTERNAL);
-			if (err < 0) {
-				err("%s - error loading firmware: error = %d", __func__, err);
+			if (err < 0)
 				goto wraperr;
-			}
 		}
 	}
-	
+
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi26_set_reset(dev,1);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 
 	for (rec = (const struct ihex_binrec *)firmware_fw->data;
 	     rec; rec = ihex_next_binrec(rec)) {
@@ -214,19 +191,15 @@ static int emi26_load_firmware (struct usb_device *dev)
 			err = emi26_writememory(dev, be32_to_cpu(rec->addr),
 						rec->data, be16_to_cpu(rec->len),
 						ANCHOR_LOAD_INTERNAL);
-			if (err < 0) {
-				err("%s - error loading firmware: error = %d", __func__, err);
+			if (err < 0)
 				goto wraperr;
-			}
 		}
 	}
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 	msleep(250);	/* let device settle */
 
 	/* return 1 to fail the driver inialization
@@ -234,6 +207,10 @@ static int emi26_load_firmware (struct usb_device *dev)
 	err = 1;
 
 wraperr:
+	if (err < 0)
+		dev_err(&dev->dev,"%s - error loading firmware: error = %d\n",
+			__func__, err);
+
 	release_firmware(loader_fw);
 	release_firmware(bitstream_fw);
 	release_firmware(firmware_fw);
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 4e0f167a6c4e..ff08015b230c 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -56,7 +56,7 @@ static int emi62_writememory(struct usb_device *dev, int address,
 	unsigned char *buffer =  kmemdup(data, length, GFP_KERNEL);
 
 	if (!buffer) {
-		err("emi62: kmalloc(%d) failed.", length);
+		dev_err(&dev->dev, "kmalloc(%d) failed.\n", length);
 		return -ENOMEM;
 	}
 	/* Note: usb_control_msg returns negative value on error or length of the
@@ -73,9 +73,8 @@ static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit)
 	dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit);
 	
 	response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
-	if (response < 0) {
-		err("emi62: set_reset (%d) failed", reset_bit);
-	}
+	if (response < 0)
+		dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit);
 	return response;
 }
 
@@ -87,18 +86,15 @@ static int emi62_load_firmware (struct usb_device *dev)
 	const struct firmware *bitstream_fw = NULL;
 	const struct firmware *firmware_fw = NULL;
 	const struct ihex_binrec *rec;
-	int err;
+	int err = -ENOMEM;
 	int i;
 	__u32 addr;	/* Address to write */
 	__u8 *buf;
 
 	dev_dbg(&dev->dev, "load_firmware\n");
 	buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
-	if (!buf) {
-		err( "%s - error loading firmware: error = %d", __func__, -ENOMEM);
-		err = -ENOMEM;
+	if (!buf)
 		goto wraperr;
-	}
 
 	err = request_ihex_firmware(&loader_fw, "emi62/loader.fw", &dev->dev);
 	if (err)
@@ -112,16 +108,13 @@ static int emi62_load_firmware (struct usb_device *dev)
 	err = request_ihex_firmware(&firmware_fw, FIRMWARE_FW, &dev->dev);
 	if (err) {
 	nofw:
-		err( "%s - request_firmware() failed", __func__);
 		goto wraperr;
 	}
 
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi62_set_reset(dev,1);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 
 	rec = (const struct ihex_binrec *)loader_fw->data;
 
@@ -130,19 +123,15 @@ static int emi62_load_firmware (struct usb_device *dev)
 		err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 					rec->data, be16_to_cpu(rec->len),
 					ANCHOR_LOAD_INTERNAL);
-		if (err < 0) {
-			err("%s - error loading firmware: error = %d", __func__, err);
+		if (err < 0)
 			goto wraperr;
-		}
 		rec = ihex_next_binrec(rec);
 	}
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
@@ -160,18 +149,14 @@ static int emi62_load_firmware (struct usb_device *dev)
 			rec = ihex_next_binrec(rec);
 		}
 		err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
-		if (err < 0) {
-			err("%s - error loading firmware: error = %d", __func__, err);
+		if (err < 0)
 			goto wraperr;
-		}
 	} while (rec);
 
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi62_set_reset(dev,1);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 
 	/* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
 	for (rec = (const struct ihex_binrec *)loader_fw->data;
@@ -179,18 +164,14 @@ static int emi62_load_firmware (struct usb_device *dev)
 		err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 					rec->data, be16_to_cpu(rec->len),
 					ANCHOR_LOAD_INTERNAL);
-		if (err < 0) {
-			err("%s - error loading firmware: error = %d", __func__, err);
+		if (err < 0)
 			goto wraperr;
-		}
 	}
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 	msleep(250);	/* let device settle */
 
 	/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
@@ -201,19 +182,15 @@ static int emi62_load_firmware (struct usb_device *dev)
 			err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 						rec->data, be16_to_cpu(rec->len),
 						ANCHOR_LOAD_EXTERNAL);
-			if (err < 0) {
-				err("%s - error loading firmware: error = %d", __func__, err);
+			if (err < 0)
 				goto wraperr;
-			}
 		}
 	}
 
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi62_set_reset(dev,1);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 
 	for (rec = (const struct ihex_binrec *)firmware_fw->data;
 	     rec; rec = ihex_next_binrec(rec)) {
@@ -221,19 +198,15 @@ static int emi62_load_firmware (struct usb_device *dev)
 			err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 						rec->data, be16_to_cpu(rec->len),
 						ANCHOR_LOAD_EXTERNAL);
-			if (err < 0) {
-				err("%s - error loading firmware: error = %d", __func__, err);
+			if (err < 0)
 				goto wraperr;
-			}
 		}
 	}
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 	msleep(250);	/* let device settle */
 
 	release_firmware(loader_fw);
@@ -247,6 +220,9 @@ static int emi62_load_firmware (struct usb_device *dev)
 	return 1;
 
 wraperr:
+	if (err < 0)
+		dev_err(&dev->dev,"%s - error loading firmware: error = %d\n",
+			__func__, err);
 	release_firmware(loader_fw);
 	release_firmware(bitstream_fw);
 	release_firmware(firmware_fw);
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 0dee24698504..ce978384fda1 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -200,7 +200,8 @@ reset:
 			return -EAGAIN;
 
 	/* should be IMGSIZE == 65040 */
-	dbg("read %d bytes fingerprint data", bytes_read);
+	dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n",
+		bytes_read);
 	return result;
 }
 
@@ -366,14 +367,14 @@ static int idmouse_probe(struct usb_interface *interface,
 			kmalloc(IMGSIZE + dev->bulk_in_size, GFP_KERNEL);
 
 		if (!dev->bulk_in_buffer) {
-			err("Unable to allocate input buffer.");
+			dev_err(&interface->dev, "Unable to allocate input buffer.\n");
 			idmouse_delete(dev);
 			return -ENOMEM;
 		}
 	}
 
 	if (!(dev->bulk_in_endpointAddr)) {
-		err("Unable to find bulk-in endpoint.");
+		dev_err(&interface->dev, "Unable to find bulk-in endpoint.\n");
 		idmouse_delete(dev);
 		return -ENODEV;
 	}
@@ -385,7 +386,7 @@ static int idmouse_probe(struct usb_interface *interface,
 	result = usb_register_dev(interface, &idmouse_class);
 	if (result) {
 		/* something prevented us from registering this device */
-		err("Unble to allocate minor number.");
+		dev_err(&interface->dev, "Unble to allocate minor number.\n");
 		usb_set_intfdata(interface, NULL);
 		idmouse_delete(dev);
 		return result;
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 4fd0dc835ae5..db46143c67a6 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -610,8 +610,8 @@ static int iowarrior_open(struct inode *inode, struct file *file)
 	interface = usb_find_interface(&iowarrior_driver, subminor);
 	if (!interface) {
 		mutex_unlock(&iowarrior_mutex);
-		err("%s - error, can't find device for minor %d", __func__,
-		    subminor);
+		printk(KERN_ERR "%s - error, can't find device for minor %d\n",
+		       __func__, subminor);
 		return -ENODEV;
 	}
 
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 5db4ab52061e..ac762299eaa8 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -334,8 +334,8 @@ static int ld_usb_open(struct inode *inode, struct file *file)
 	interface = usb_find_interface(&ld_usb_driver, subminor);
 
 	if (!interface) {
-		err("%s - error, can't find device for minor %d\n",
-		     __func__, subminor);
+		printk(KERN_ERR "%s - error, can't find device for minor %d\n",
+		       __func__, subminor);
 		return -ENODEV;
 	}
 
@@ -485,7 +485,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
 	/* verify that the device wasn't unplugged */
 	if (dev->intf == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d\n", retval);
+		printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
 		goto unlock_exit;
 	}
 
@@ -565,7 +565,7 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
 	/* verify that the device wasn't unplugged */
 	if (dev->intf == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d\n", retval);
+		printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
 		goto unlock_exit;
 	}
 
@@ -603,7 +603,9 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
 					 bytes_to_write,
 					 USB_CTRL_SET_TIMEOUT * HZ);
 		if (retval < 0)
-			err("Couldn't submit HID_REQ_SET_REPORT %d\n", retval);
+			dev_err(&dev->intf->dev,
+				"Couldn't submit HID_REQ_SET_REPORT %d\n",
+				retval);
 		goto unlock_exit;
 	}
 
@@ -624,7 +626,8 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
 	retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
 	if (retval) {
 		dev->interrupt_out_busy = 0;
-		err("Couldn't submit interrupt_out_urb %d\n", retval);
+		dev_err(&dev->intf->dev,
+			"Couldn't submit interrupt_out_urb %d\n", retval);
 		goto unlock_exit;
 	}
 	retval = bytes_to_write;
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 575222042767..a2702cbfe804 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -354,8 +354,8 @@ static int tower_open (struct inode *inode, struct file *file)
 	interface = usb_find_interface (&tower_driver, subminor);
 
 	if (!interface) {
-		err ("%s - error, can't find device for minor %d",
-		     __func__, subminor);
+		printk(KERN_ERR "%s - error, can't find device for minor %d\n",
+		       __func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
@@ -397,7 +397,8 @@ static int tower_open (struct inode *inode, struct file *file)
 				  sizeof(reset_reply),
 				  1000);
 	if (result < 0) {
-		err("LEGO USB Tower reset control request failed");
+		dev_err(&dev->udev->dev,
+			"LEGO USB Tower reset control request failed\n");
 		retval = result;
 		goto unlock_exit;
 	}
@@ -420,7 +421,8 @@ static int tower_open (struct inode *inode, struct file *file)
 
 	retval = usb_submit_urb (dev->interrupt_in_urb, GFP_KERNEL);
 	if (retval) {
-		err("Couldn't submit interrupt_in_urb %d", retval);
+		dev_err(&dev->udev->dev,
+			"Couldn't submit interrupt_in_urb %d\n", retval);
 		dev->interrupt_in_running = 0;
 		dev->open_count = 0;
 		goto unlock_exit;
@@ -608,7 +610,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count,
 	/* verify that the device wasn't unplugged */
 	if (dev->udev == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d", retval);
+		printk(KERN_ERR "legousbtower: No device or device unplugged %d\n", retval);
 		goto unlock_exit;
 	}
 
@@ -697,7 +699,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t
 	/* verify that the device wasn't unplugged */
 	if (dev->udev == NULL) {
 		retval = -ENODEV;
-		err("No device or device unplugged %d", retval);
+		printk(KERN_ERR "legousbtower: No device or device unplugged %d\n", retval);
 		goto unlock_exit;
 	}
 
@@ -744,7 +746,8 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t
 	retval = usb_submit_urb (dev->interrupt_out_urb, GFP_KERNEL);
 	if (retval) {
 		dev->interrupt_out_busy = 0;
-		err("Couldn't submit interrupt_out_urb %d", retval);
+		dev_err(&dev->udev->dev,
+			"Couldn't submit interrupt_out_urb %d\n", retval);
 		goto unlock_exit;
 	}
 	retval = bytes_to_write;
@@ -803,9 +806,10 @@ resubmit:
 	/* resubmit if we're still running */
 	if (dev->interrupt_in_running && dev->udev) {
 		retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC);
-		if (retval) {
-			err("%s: usb_submit_urb failed (%d)", __func__, retval);
-		}
+		if (retval)
+			dev_err(&dev->udev->dev,
+				"%s: usb_submit_urb failed (%d)\n",
+				__func__, retval);
 	}
 
 exit:
@@ -852,6 +856,7 @@ static void tower_interrupt_out_callback (struct urb *urb)
  */
 static int tower_probe (struct usb_interface *interface, const struct usb_device_id *id)
 {
+	struct device *idev = &interface->dev;
 	struct usb_device *udev = interface_to_usbdev(interface);
 	struct lego_usb_tower *dev = NULL;
 	struct usb_host_interface *iface_desc;
@@ -871,7 +876,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 	dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL);
 
 	if (dev == NULL) {
-		err ("Out of memory");
+		dev_err(idev, "Out of memory\n");
 		goto exit;
 	}
 
@@ -915,37 +920,37 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 		}
 	}
 	if(dev->interrupt_in_endpoint == NULL) {
-		err("interrupt in endpoint not found");
+		dev_err(idev, "interrupt in endpoint not found\n");
 		goto error;
 	}
 	if (dev->interrupt_out_endpoint == NULL) {
-		err("interrupt out endpoint not found");
+		dev_err(idev, "interrupt out endpoint not found\n");
 		goto error;
 	}
 
 	dev->read_buffer = kmalloc (read_buffer_size, GFP_KERNEL);
 	if (!dev->read_buffer) {
-		err("Couldn't allocate read_buffer");
+		dev_err(idev, "Couldn't allocate read_buffer\n");
 		goto error;
 	}
 	dev->interrupt_in_buffer = kmalloc (usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL);
 	if (!dev->interrupt_in_buffer) {
-		err("Couldn't allocate interrupt_in_buffer");
+		dev_err(idev, "Couldn't allocate interrupt_in_buffer\n");
 		goto error;
 	}
 	dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!dev->interrupt_in_urb) {
-		err("Couldn't allocate interrupt_in_urb");
+		dev_err(idev, "Couldn't allocate interrupt_in_urb\n");
 		goto error;
 	}
 	dev->interrupt_out_buffer = kmalloc (write_buffer_size, GFP_KERNEL);
 	if (!dev->interrupt_out_buffer) {
-		err("Couldn't allocate interrupt_out_buffer");
+		dev_err(idev, "Couldn't allocate interrupt_out_buffer\n");
 		goto error;
 	}
 	dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!dev->interrupt_out_urb) {
-		err("Couldn't allocate interrupt_out_urb");
+		dev_err(idev, "Couldn't allocate interrupt_out_urb\n");
 		goto error;
 	}
 	dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval;
@@ -958,7 +963,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 
 	if (retval) {
 		/* something prevented us from registering this driver */
-		err ("Not able to get a minor for this device.");
+		dev_err(idev, "Not able to get a minor for this device.\n");
 		usb_set_intfdata (interface, NULL);
 		goto error;
 	}
@@ -980,7 +985,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 				  sizeof(get_version_reply),
 				  1000);
 	if (result < 0) {
-		err("LEGO USB Tower get version control request failed");
+		dev_err(idev, "LEGO USB Tower get version control request failed\n");
 		retval = result;
 		goto error;
 	}
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index 487a8ce0775e..1084124c4a44 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -153,10 +153,10 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
 
 		requesttype = rio_cmd.requesttype | USB_DIR_IN |
 		    USB_TYPE_VENDOR | USB_RECIP_DEVICE;
-		dbg
-		    ("sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x",
-		     requesttype, rio_cmd.request, rio_cmd.value,
-		     rio_cmd.index, rio_cmd.length);
+		dev_dbg(&rio->rio_dev->dev,
+			"sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
+			requesttype, rio_cmd.request, rio_cmd.value,
+			rio_cmd.index, rio_cmd.length);
 		/* Send rio control message */
 		retries = 3;
 		while (retries) {
@@ -171,11 +171,14 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
 			if (result == -ETIMEDOUT)
 				retries--;
 			else if (result < 0) {
-				err("Error executing ioctrl. code = %d", result);
+				dev_err(&rio->rio_dev->dev,
+					"Error executing ioctrl. code = %d\n",
+					result);
 				retries = 0;
 			} else {
-				dbg("Executed ioctl. Result = %d (data=%02x)",
-				     result, buffer[0]);
+				dev_dbg(&rio->rio_dev->dev,
+					"Executed ioctl. Result = %d (data=%02x)\n",
+					result, buffer[0]);
 				if (copy_to_user(rio_cmd.buffer, buffer,
 						 rio_cmd.length)) {
 					free_page((unsigned long) buffer);
@@ -221,9 +224,10 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
 
 		requesttype = rio_cmd.requesttype | USB_DIR_OUT |
 		    USB_TYPE_VENDOR | USB_RECIP_DEVICE;
-		dbg("sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x",
-		     requesttype, rio_cmd.request, rio_cmd.value,
-		     rio_cmd.index, rio_cmd.length);
+		dev_dbg(&rio->rio_dev->dev,
+			"sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
+			requesttype, rio_cmd.request, rio_cmd.value,
+			rio_cmd.index, rio_cmd.length);
 		/* Send rio control message */
 		retries = 3;
 		while (retries) {
@@ -238,10 +242,13 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
 			if (result == -ETIMEDOUT)
 				retries--;
 			else if (result < 0) {
-				err("Error executing ioctrl. code = %d", result);
+				dev_err(&rio->rio_dev->dev,
+					"Error executing ioctrl. code = %d\n",
+					result);
 				retries = 0;
 			} else {
-				dbg("Executed ioctl. Result = %d", result);
+				dev_dbg(&rio->rio_dev->dev,
+					"Executed ioctl. Result = %d\n", result);
 				retries = 0;
 
 			}
@@ -313,8 +320,9 @@ write_rio(struct file *file, const char __user *buffer,
 					 usb_sndbulkpipe(rio->rio_dev, 2),
 					 obuf, thistime, &partial, 5000);
 
-			dbg("write stats: result:%d thistime:%lu partial:%u",
-			     result, thistime, partial);
+			dev_dbg(&rio->rio_dev->dev,
+				"write stats: result:%d thistime:%lu partial:%u\n",
+				result, thistime, partial);
 
 			if (result == -ETIMEDOUT) {	/* NAK - so hold for a while */
 				if (!maxretry--) {
@@ -332,7 +340,8 @@ write_rio(struct file *file, const char __user *buffer,
 				break;
 		};
 		if (result) {
-			err("Write Whoops - %x", result);
+			dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n",
+				result);
 			errn = -EIO;
 			goto error;
 		}
@@ -393,15 +402,17 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
 				      ibuf, this_read, &partial,
 				      8000);
 
-		dbg("read stats: result:%d this_read:%u partial:%u",
-		       result, this_read, partial);
+		dev_dbg(&rio->rio_dev->dev,
+			"read stats: result:%d this_read:%u partial:%u\n",
+			result, this_read, partial);
 
 		if (partial) {
 			count = this_read = partial;
 		} else if (result == -ETIMEDOUT || result == 15) {	/* FIXME: 15 ??? */
 			if (!maxretry--) {
 				mutex_unlock(&(rio->lock));
-				err("read_rio: maxretry timeout");
+				dev_err(&rio->rio_dev->dev,
+					"read_rio: maxretry timeout\n");
 				return -ETIME;
 			}
 			prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
@@ -410,8 +421,9 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
 			continue;
 		} else if (result != -EREMOTEIO) {
 			mutex_unlock(&(rio->lock));
-			err("Read Whoops - result:%u partial:%u this_read:%u",
-			     result, partial, this_read);
+			dev_err(&rio->rio_dev->dev,
+				"Read Whoops - result:%u partial:%u this_read:%u\n",
+				result, partial, this_read);
 			return -EIO;
 		} else {
 			mutex_unlock(&(rio->lock));
@@ -459,26 +471,29 @@ static int probe_rio(struct usb_interface *intf,
 
 	retval = usb_register_dev(intf, &usb_rio_class);
 	if (retval) {
-		err("Not able to get a minor for this device.");
+		dev_err(&dev->dev,
+			"Not able to get a minor for this device.\n");
 		return -ENOMEM;
 	}
 
 	rio->rio_dev = dev;
 
 	if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) {
-		err("probe_rio: Not enough memory for the output buffer");
+		dev_err(&dev->dev,
+			"probe_rio: Not enough memory for the output buffer\n");
 		usb_deregister_dev(intf, &usb_rio_class);
 		return -ENOMEM;
 	}
-	dbg("probe_rio: obuf address:%p", rio->obuf);
+	dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
 
 	if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) {
-		err("probe_rio: Not enough memory for the input buffer");
+		dev_err(&dev->dev,
+			"probe_rio: Not enough memory for the input buffer\n");
 		usb_deregister_dev(intf, &usb_rio_class);
 		kfree(rio->obuf);
 		return -ENOMEM;
 	}
-	dbg("probe_rio: ibuf address:%p", rio->ibuf);
+	dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
 
 	mutex_init(&(rio->lock));
 
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index e2b4bd31c2b6..89927bcff974 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -87,8 +87,8 @@ static int lcd_open(struct inode *inode, struct file *file)
 	interface = usb_find_interface(&lcd_driver, subminor);
 	if (!interface) {
 		mutex_unlock(&lcd_mutex);
-		err("USBLCD: %s - error, can't find device for minor %d",
-		     __func__, subminor);
+		printk(KERN_ERR "USBLCD: %s - error, can't find device for minor %d\n",
+		       __func__, subminor);
 		return -ENODEV;
 	}
 
@@ -209,8 +209,8 @@ static void lcd_write_bulk_callback(struct urb *urb)
 	    !(status == -ENOENT ||
 	      status == -ECONNRESET ||
 	      status == -ESHUTDOWN)) {
-		dbg("USBLCD: %s - nonzero write bulk status received: %d",
-		    __func__, status);
+		dev_dbg(&dev->interface->dev,
+			"nonzero write bulk status received: %d\n", status);
 	}
 
 	/* free up our allocated buffer */
@@ -268,8 +268,9 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer,
 	/* send the data out the bulk port */
 	retval = usb_submit_urb(urb, GFP_KERNEL);
 	if (retval) {
-		err("USBLCD: %s - failed submitting write urb, error %d",
-		    __func__, retval);
+		dev_err(&dev->udev->dev,
+			"%s - failed submitting write urb, error %d\n",
+			__func__, retval);
 		goto error_unanchor;
 	}
 
@@ -322,7 +323,7 @@ static int lcd_probe(struct usb_interface *interface,
 	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL) {
-		err("Out of memory");
+		dev_err(&interface->dev, "Out of memory\n");
 		goto error;
 	}
 	kref_init(&dev->kref);
@@ -352,7 +353,8 @@ static int lcd_probe(struct usb_interface *interface,
 			dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
 			dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
 			if (!dev->bulk_in_buffer) {
-				err("Could not allocate bulk_in_buffer");
+				dev_err(&interface->dev,
+					"Could not allocate bulk_in_buffer\n");
 				goto error;
 			}
 		}
@@ -364,7 +366,8 @@ static int lcd_probe(struct usb_interface *interface,
 		}
 	}
 	if (!(dev->bulk_in_endpointAddr && dev->bulk_out_endpointAddr)) {
-		err("Could not find both bulk-in and bulk-out endpoints");
+		dev_err(&interface->dev,
+			"Could not find both bulk-in and bulk-out endpoints\n");
 		goto error;
 	}
 
@@ -375,7 +378,8 @@ static int lcd_probe(struct usb_interface *interface,
 	retval = usb_register_dev(interface, &lcd_class);
 	if (retval) {
 		/* something prevented us from registering this driver */
-		err("Not able to get a minor for this device.");
+		dev_err(&interface->dev,
+			"Not able to get a minor for this device.\n");
 		usb_set_intfdata(interface, NULL);
 		goto error;
 	}
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 9dcb68f04f03..055b84adedac 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1028,7 +1028,10 @@ test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param)
 		case 13:	/* short read, resembling case 10 */
 			req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0);
 			/* last data packet "should" be DATA1, not DATA0 */
-			len = 1024 - udev->descriptor.bMaxPacketSize0;
+			if (udev->speed == USB_SPEED_SUPER)
+				len = 1024 - 512;
+			else
+				len = 1024 - udev->descriptor.bMaxPacketSize0;
 			expected = -EREMOTEIO;
 			break;
 		case 14:	/* short read; try to fill the last packet */
@@ -1387,11 +1390,15 @@ static int test_halt(struct usbtest_dev *tdev, int ep, struct urb *urb)
 
 static int halt_simple(struct usbtest_dev *dev)
 {
-	int		ep;
-	int		retval = 0;
-	struct urb	*urb;
+	int			ep;
+	int			retval = 0;
+	struct urb		*urb;
+	struct usb_device	*udev = testdev_to_usbdev(dev);
 
-	urb = simple_alloc_urb(testdev_to_usbdev(dev), 0, 512);
+	if (udev->speed == USB_SPEED_SUPER)
+		urb = simple_alloc_urb(udev, 0, 1024);
+	else
+		urb = simple_alloc_urb(udev, 0, 512);
 	if (urb == NULL)
 		return -ENOMEM;
 
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 8b1d94a76914..29cad9e0a7a9 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -85,9 +85,9 @@ static void destroy_priv(struct kref *kref)
 {
 	struct parport_uss720_private *priv = container_of(kref, struct parport_uss720_private, ref_count);
 
+	dev_dbg(&priv->usbdev->dev, "destroying priv datastructure\n");
 	usb_put_dev(priv->usbdev);
 	kfree(priv);
-	dbg("destroying priv datastructure");
 }
 
 static void destroy_async(struct kref *kref)
@@ -118,14 +118,17 @@ static void async_complete(struct urb *urb)
 	priv = rq->priv;
 	pp = priv->pp;
 	if (status) {
-		err("async_complete: urb error %d", status);
+		dev_err(&urb->dev->dev, "async_complete: urb error %d\n",
+			status);
 	} else if (rq->dr.bRequest == 3) {
 		memcpy(priv->reg, rq->reg, sizeof(priv->reg));
 #if 0
-		dbg("async_complete regs %02x %02x %02x %02x %02x %02x %02x",
-		    (unsigned int)priv->reg[0], (unsigned int)priv->reg[1], (unsigned int)priv->reg[2],
-		    (unsigned int)priv->reg[3], (unsigned int)priv->reg[4], (unsigned int)priv->reg[5],
-		    (unsigned int)priv->reg[6]);
+		dev_dbg(&priv->usbdev->dev,
+			"async_complete regs %02x %02x %02x %02x %02x %02x %02x\n",
+			(unsigned int)priv->reg[0], (unsigned int)priv->reg[1],
+			(unsigned int)priv->reg[2], (unsigned int)priv->reg[3],
+			(unsigned int)priv->reg[4], (unsigned int)priv->reg[5],
+			(unsigned int)priv->reg[6]);
 #endif
 		/* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */
 		if (rq->reg[2] & rq->reg[1] & 0x10 && pp)
@@ -151,7 +154,7 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p
 		return NULL;
 	rq = kmalloc(sizeof(struct uss720_async_request), mem_flags);
 	if (!rq) {
-		err("submit_async_request out of memory");
+		dev_err(&usbdev->dev, "submit_async_request out of memory\n");
 		return NULL;
 	}
 	kref_init(&rq->ref_count);
@@ -162,7 +165,7 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p
 	rq->urb = usb_alloc_urb(0, mem_flags);
 	if (!rq->urb) {
 		kref_put(&rq->ref_count, destroy_async);
-		err("submit_async_request out of memory");
+		dev_err(&usbdev->dev, "submit_async_request out of memory\n");
 		return NULL;
 	}
 	rq->dr.bRequestType = requesttype;
@@ -182,7 +185,7 @@ static struct uss720_async_request *submit_async_request(struct parport_uss720_p
 	if (!ret)
 		return rq;
 	destroy_async(&rq->ref_count);
-	err("submit_async_request submit_urb failed with %d", ret);
+	dev_err(&usbdev->dev, "submit_async_request submit_urb failed with %d\n", ret);
 	return NULL;
 }
 
@@ -217,7 +220,8 @@ static int get_1284_register(struct parport *pp, unsigned char reg, unsigned cha
 	priv = pp->private_data;
 	rq = submit_async_request(priv, 3, 0xc0, ((unsigned int)reg) << 8, 0, mem_flags);
 	if (!rq) {
-		err("get_1284_register(%u) failed", (unsigned int)reg);
+		dev_err(&priv->usbdev->dev, "get_1284_register(%u) failed",
+			(unsigned int)reg);
 		return -EIO;
 	}
 	if (!val) {
@@ -248,7 +252,8 @@ static int set_1284_register(struct parport *pp, unsigned char reg, unsigned cha
 	priv = pp->private_data;
 	rq = submit_async_request(priv, 4, 0x40, (((unsigned int)reg) << 8) | val, 0, mem_flags);
 	if (!rq) {
-		err("set_1284_register(%u,%u) failed", (unsigned int)reg, (unsigned int)val);
+		dev_err(&priv->usbdev->dev, "set_1284_register(%u,%u) failed",
+			(unsigned int)reg, (unsigned int)val);
 		return -EIO;
 	}
 	kref_put(&rq->ref_count, destroy_async);
@@ -690,9 +695,9 @@ static int uss720_probe(struct usb_interface *intf,
 	unsigned char reg;
 	int i;
 
-	dbg("probe: vendor id 0x%x, device id 0x%x\n",
-	    le16_to_cpu(usbdev->descriptor.idVendor),
-	    le16_to_cpu(usbdev->descriptor.idProduct));
+	dev_dbg(&intf->dev, "probe: vendor id 0x%x, device id 0x%x\n",
+		le16_to_cpu(usbdev->descriptor.idVendor),
+		le16_to_cpu(usbdev->descriptor.idProduct));
 
 	/* our known interfaces have 3 alternate settings */
 	if (intf->num_altsetting != 3) {
@@ -700,7 +705,7 @@ static int uss720_probe(struct usb_interface *intf,
 		return -ENODEV;
 	}
 	i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2);
-	dbg("set inteface result %d", i);
+	dev_dbg(&intf->dev, "set inteface result %d\n", i);
 
 	interface = intf->cur_altsetting;
 
@@ -731,11 +736,13 @@ static int uss720_probe(struct usb_interface *intf,
 	set_1284_register(pp, 2, 0x0c, GFP_KERNEL);
 	/* debugging */
 	get_1284_register(pp, 0, &reg, GFP_KERNEL);
-	dbg("reg: %02x %02x %02x %02x %02x %02x %02x",
-	    priv->reg[0], priv->reg[1], priv->reg[2], priv->reg[3], priv->reg[4], priv->reg[5], priv->reg[6]);
+	dev_dbg(&intf->dev, "reg: %02x %02x %02x %02x %02x %02x %02x\n",
+		priv->reg[0], priv->reg[1], priv->reg[2], priv->reg[3],
+		priv->reg[4], priv->reg[5], priv->reg[6]);
 
 	endpoint = &interface->endpoint[2];
-	dbg("epaddr %d interval %d", endpoint->desc.bEndpointAddress, endpoint->desc.bInterval);
+	dev_dbg(&intf->dev, "epaddr %d interval %d\n",
+		endpoint->desc.bEndpointAddress, endpoint->desc.bInterval);
 	parport_announce_port(pp);
 
 	usb_set_intfdata(intf, pp);
@@ -753,20 +760,20 @@ static void uss720_disconnect(struct usb_interface *intf)
 	struct parport_uss720_private *priv;
 	struct usb_device *usbdev;
 
-	dbg("disconnect");
+	dev_dbg(&intf->dev, "disconnect\n");
 	usb_set_intfdata(intf, NULL);
 	if (pp) {
 		priv = pp->private_data;
 		usbdev = priv->usbdev;
 		priv->usbdev = NULL;
 		priv->pp = NULL;
-		dbg("parport_remove_port");
+		dev_dbg(&intf->dev, "parport_remove_port\n");
 		parport_remove_port(pp);
 		parport_put_port(pp);
 		kill_all_async_requests_priv(priv);
 		kref_put(&priv->ref_count, destroy_priv);
 	}
-	dbg("disconnect done");
+	dev_dbg(&intf->dev, "disconnect done\n");
 }
 
 /* table of cables that work through this driver */
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 70201462e19c..42ad2e6d86c4 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -83,7 +83,8 @@ static void yurex_control_callback(struct urb *urb)
 	int status = urb->status;
 
 	if (status) {
-		err("%s - control failed: %d\n", __func__, status);
+		dev_err(&urb->dev->dev, "%s - control failed: %d\n",
+			__func__, status);
 		wake_up_interruptible(&dev->waitq);
 		return;
 	}
@@ -94,7 +95,7 @@ static void yurex_delete(struct kref *kref)
 {
 	struct usb_yurex *dev = to_yurex_dev(kref);
 
-	dbg("yurex_delete");
+	dev_dbg(&dev->interface->dev, "%s\n", __func__);
 
 	usb_put_dev(dev->udev);
 	if (dev->cntl_urb) {
@@ -137,8 +138,9 @@ static void yurex_interrupt(struct urb *urb)
 	case 0: /*success*/
 		break;
 	case -EOVERFLOW:
-		err("%s - overflow with length %d, actual length is %d",
-		    __func__, YUREX_BUF_SIZE, dev->urb->actual_length);
+		dev_err(&dev->interface->dev,
+			"%s - overflow with length %d, actual length is %d\n",
+			__func__, YUREX_BUF_SIZE, dev->urb->actual_length);
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
@@ -146,7 +148,8 @@ static void yurex_interrupt(struct urb *urb)
 		/* The device is terminated, clean up */
 		return;
 	default:
-		err("%s - unknown status received: %d", __func__, status);
+		dev_err(&dev->interface->dev,
+			"%s - unknown status received: %d\n", __func__, status);
 		goto exit;
 	}
 
@@ -162,16 +165,19 @@ static void yurex_interrupt(struct urb *urb)
 				if (i != 5)
 					dev->bbu <<= 8;
 			}
-			dbg("%s count: %lld", __func__, dev->bbu);
+			dev_dbg(&dev->interface->dev, "%s count: %lld\n",
+				__func__, dev->bbu);
 			spin_unlock_irqrestore(&dev->lock, flags);
 
 			kill_fasync(&dev->async_queue, SIGIO, POLL_IN);
 		}
 		else
-			dbg("data format error - no EOF");
+			dev_dbg(&dev->interface->dev,
+				"data format error - no EOF\n");
 		break;
 	case CMD_ACK:
-		dbg("%s ack: %c", __func__, buf[1]);
+		dev_dbg(&dev->interface->dev, "%s ack: %c\n",
+			__func__, buf[1]);
 		wake_up_interruptible(&dev->waitq);
 		break;
 	}
@@ -179,7 +185,7 @@ static void yurex_interrupt(struct urb *urb)
 exit:
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
 	if (retval) {
-		err("%s - usb_submit_urb failed: %d",
+		dev_err(&dev->interface->dev, "%s - usb_submit_urb failed: %d\n",
 			__func__, retval);
 	}
 }
@@ -196,7 +202,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
 	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev) {
-		err("Out of memory");
+		dev_err(&interface->dev, "Out of memory\n");
 		goto error;
 	}
 	kref_init(&dev->kref);
@@ -219,7 +225,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
 	}
 	if (!dev->int_in_endpointAddr) {
 		retval = -ENODEV;
-		err("Could not find endpoints");
+		dev_err(&interface->dev, "Could not find endpoints\n");
 		goto error;
 	}
 
@@ -227,14 +233,14 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
 	/* allocate control URB */
 	dev->cntl_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!dev->cntl_urb) {
-		err("Could not allocate control URB");
+		dev_err(&interface->dev, "Could not allocate control URB\n");
 		goto error;
 	}
 
 	/* allocate buffer for control req */
 	dev->cntl_req = kmalloc(YUREX_BUF_SIZE, GFP_KERNEL);
 	if (!dev->cntl_req) {
-		err("Could not allocate cntl_req");
+		dev_err(&interface->dev, "Could not allocate cntl_req\n");
 		goto error;
 	}
 
@@ -243,7 +249,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
 					      GFP_KERNEL,
 					      &dev->cntl_urb->transfer_dma);
 	if (!dev->cntl_buffer) {
-		err("Could not allocate cntl_buffer");
+		dev_err(&interface->dev, "Could not allocate cntl_buffer\n");
 		goto error;
 	}
 
@@ -265,7 +271,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
 	/* allocate interrupt URB */
 	dev->urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!dev->urb) {
-		err("Could not allocate URB");
+		dev_err(&interface->dev, "Could not allocate URB\n");
 		goto error;
 	}
 
@@ -273,7 +279,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
 	dev->int_buffer = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE,
 					GFP_KERNEL, &dev->urb->transfer_dma);
 	if (!dev->int_buffer) {
-		err("Could not allocate int_buffer");
+		dev_err(&interface->dev, "Could not allocate int_buffer\n");
 		goto error;
 	}
 
@@ -285,7 +291,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
 	dev->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	if (usb_submit_urb(dev->urb, GFP_KERNEL)) {
 		retval = -EIO;
-		err("Could not submitting URB");
+		dev_err(&interface->dev, "Could not submitting URB\n");
 		goto error;
 	}
 
@@ -295,7 +301,8 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_
 	/* we can register the device now, as it is ready */
 	retval = usb_register_dev(interface, &yurex_class);
 	if (retval) {
-		err("Not able to get a minor for this device.");
+		dev_err(&interface->dev,
+			"Not able to get a minor for this device.\n");
 		usb_set_intfdata(interface, NULL);
 		goto error;
 	}
@@ -368,8 +375,8 @@ static int yurex_open(struct inode *inode, struct file *file)
 
 	interface = usb_find_interface(&yurex_driver, subminor);
 	if (!interface) {
-		err("%s - error, can't find device for minor %d",
-		    __func__, subminor);
+		printk(KERN_ERR "%s - error, can't find device for minor %d",
+		       __func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
@@ -505,7 +512,8 @@ static ssize_t yurex_write(struct file *file, const char *user_buffer, size_t co
 
 	/* send the data as the control msg */
 	prepare_to_wait(&dev->waitq, &wait, TASK_INTERRUPTIBLE);
-	dbg("%s - submit %c", __func__, dev->cntl_buffer[0]);
+	dev_dbg(&dev->interface->dev, "%s - submit %c\n", __func__,
+		dev->cntl_buffer[0]);
 	retval = usb_submit_urb(dev->cntl_urb, GFP_KERNEL);
 	if (retval >= 0)
 		timeout = schedule_timeout(YUREX_WRITE_TIMEOUT);
@@ -514,7 +522,9 @@ static ssize_t yurex_write(struct file *file, const char *user_buffer, size_t co
 	mutex_unlock(&dev->io_mutex);
 
 	if (retval < 0) {
-		err("%s - failed to send bulk msg, error %d", __func__, retval);
+		dev_err(&dev->interface->dev,
+			"%s - failed to send bulk msg, error %d\n",
+			__func__, retval);
 		goto error;
 	}
 	if (set && timeout)
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index f70cab3beeec..ef0c3f9f0947 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -8,6 +8,7 @@ config USB_MUSB_HDRC
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	depends on USB && USB_GADGET
 	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
+	select NOP_USB_XCEIV if (SOC_OMAPTI81XX || SOC_OMAPAM33XX)
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
@@ -54,6 +55,10 @@ config USB_MUSB_AM35X
 	tristate "AM35x"
 	depends on ARCH_OMAP
 
+config USB_MUSB_DSPS
+	tristate "TI DSPS platforms"
+	depends on SOC_OMAPTI81XX || SOC_OMAPAM33XX
+
 config USB_MUSB_BLACKFIN
 	tristate "Blackfin"
 	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
@@ -70,7 +75,8 @@ choice
 	default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 	default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
 	default USB_TUSB_OMAP_DMA if USB_MUSB_TUSB6010
-	default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X
+	default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X \
+				|| USB_MUSB_DSPS
 	help
 	  Unfortunately, only one option can be enabled here. Ideally one
 	  should be able to build all these drivers into one kernel to
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 88bfb9dee4bf..3b858715b5ea 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -13,6 +13,7 @@ musb_hdrc-$(CONFIG_DEBUG_FS)			+= musb_debugfs.o
 # Hardware Glue Layer
 obj-$(CONFIG_USB_MUSB_OMAP2PLUS)		+= omap2430.o
 obj-$(CONFIG_USB_MUSB_AM35X)			+= am35x.o
+obj-$(CONFIG_USB_MUSB_DSPS)			+= musb_dsps.o
 obj-$(CONFIG_USB_MUSB_TUSB6010)			+= tusb6010.o
 obj-$(CONFIG_USB_MUSB_DAVINCI)			+= davinci.o
 obj-$(CONFIG_USB_MUSB_DA8XX)			+= da8xx.o
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 66bc376005d2..8637c1f69fc3 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -6,6 +6,7 @@
  * The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
  */
 
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 66aaccf04490..db3dff854b71 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1034,7 +1034,9 @@ static void musb_shutdown(struct platform_device *pdev)
 	|| defined(CONFIG_USB_MUSB_OMAP2PLUS)		\
 	|| defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)	\
 	|| defined(CONFIG_USB_MUSB_AM35X)		\
-	|| defined(CONFIG_USB_MUSB_AM35X_MODULE)
+	|| defined(CONFIG_USB_MUSB_AM35X_MODULE)	\
+	|| defined(CONFIG_USB_MUSB_DSPS)		\
+	|| defined(CONFIG_USB_MUSB_DSPS_MODULE)
 static ushort __devinitdata fifo_mode = 4;
 #elif defined(CONFIG_USB_MUSB_UX500)			\
 	|| defined(CONFIG_USB_MUSB_UX500_MODULE)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
new file mode 100644
index 000000000000..23db42db761a
--- /dev/null
+++ b/drivers/usb/musb/musb_dsps.c
@@ -0,0 +1,711 @@
+/*
+ * Texas Instruments DSPS platforms "glue layer"
+ *
+ * Copyright (C) 2012, by Texas Instruments
+ *
+ * Based on the am35x "glue layer" code.
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ * musb_dsps.c will be a common file for all the TI DSPS platforms
+ * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x.
+ * For now only ti81x is using this and in future davinci.c, am35x.c
+ * da8xx.c would be merged to this file after testing.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
+#include <linux/module.h>
+
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+#include <plat/usb.h>
+
+#include "musb_core.h"
+
+/**
+ * avoid using musb_readx()/musb_writex() as glue layer should not be
+ * dependent on musb core layer symbols.
+ */
+static inline u8 dsps_readb(const void __iomem *addr, unsigned offset)
+	{ return __raw_readb(addr + offset); }
+
+static inline u32 dsps_readl(const void __iomem *addr, unsigned offset)
+	{ return __raw_readl(addr + offset); }
+
+static inline void dsps_writeb(void __iomem *addr, unsigned offset, u8 data)
+	{ __raw_writeb(data, addr + offset); }
+
+static inline void dsps_writel(void __iomem *addr, unsigned offset, u32 data)
+	{ __raw_writel(data, addr + offset); }
+
+/**
+ * DSPS musb wrapper register offset.
+ * FIXME: This should be expanded to have all the wrapper registers from TI DSPS
+ * musb ips.
+ */
+struct dsps_musb_wrapper {
+	u16	revision;
+	u16	control;
+	u16	status;
+	u16	eoi;
+	u16	epintr_set;
+	u16	epintr_clear;
+	u16	epintr_status;
+	u16	coreintr_set;
+	u16	coreintr_clear;
+	u16	coreintr_status;
+	u16	phy_utmi;
+	u16	mode;
+
+	/* bit positions for control */
+	unsigned	reset:5;
+
+	/* bit positions for interrupt */
+	unsigned	usb_shift:5;
+	u32		usb_mask;
+	u32		usb_bitmap;
+	unsigned	drvvbus:5;
+
+	unsigned	txep_shift:5;
+	u32		txep_mask;
+	u32		txep_bitmap;
+
+	unsigned	rxep_shift:5;
+	u32		rxep_mask;
+	u32		rxep_bitmap;
+
+	/* bit positions for phy_utmi */
+	unsigned	otg_disable:5;
+
+	/* bit positions for mode */
+	unsigned	iddig:5;
+	/* miscellaneous stuff */
+	u32		musb_core_offset;
+	u8		poll_seconds;
+};
+
+/**
+ * DSPS glue structure.
+ */
+struct dsps_glue {
+	struct device *dev;
+	struct platform_device *musb;	/* child musb pdev */
+	const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
+	struct timer_list timer;	/* otg_workaround timer */
+};
+
+/**
+ * dsps_musb_enable - enable interrupts
+ */
+static void dsps_musb_enable(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 epmask, coremask;
+
+	/* Workaround: setup IRQs through both register sets. */
+	epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) |
+	       ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
+	coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
+
+	dsps_writel(reg_base, wrp->epintr_set, epmask);
+	dsps_writel(reg_base, wrp->coreintr_set, coremask);
+	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
+	if (is_otg_enabled(musb))
+		dsps_writel(reg_base, wrp->coreintr_set,
+			    (1 << wrp->drvvbus) << wrp->usb_shift);
+}
+
+/**
+ * dsps_musb_disable - disable HDRC and flush interrupts
+ */
+static void dsps_musb_disable(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *reg_base = musb->ctrl_base;
+
+	dsps_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
+	dsps_writel(reg_base, wrp->epintr_clear,
+			 wrp->txep_bitmap | wrp->rxep_bitmap);
+	dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	dsps_writel(reg_base, wrp->eoi, 0);
+}
+
+static void otg_timer(unsigned long _musb)
+{
+	struct musb *musb = (void *)_musb;
+	void __iomem *mregs = musb->mregs;
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	u8 devctl;
+	unsigned long flags;
+
+	/*
+	 * We poll because DSPS IP's won't expose several OTG-critical
+	 * status change events (from the transceiver) otherwise.
+	 */
+	devctl = dsps_readb(mregs, MUSB_DEVCTL);
+	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
+				otg_state_string(musb->xceiv->state));
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv->state) {
+	case OTG_STATE_A_WAIT_BCON:
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		dsps_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+		devctl = dsps_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE) {
+			musb->xceiv->state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		} else {
+			musb->xceiv->state = OTG_STATE_A_IDLE;
+			MUSB_HST_MODE(musb);
+		}
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+		dsps_writel(musb->ctrl_base, wrp->coreintr_set,
+			    MUSB_INTR_VBUSERROR << wrp->usb_shift);
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!is_peripheral_enabled(musb))
+			break;
+
+		devctl = dsps_readb(mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			mod_timer(&glue->timer,
+					jiffies + wrp->poll_seconds * HZ);
+		else
+			musb->xceiv->state = OTG_STATE_A_IDLE;
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	static unsigned long last_timer;
+
+	if (!is_otg_enabled(musb))
+		return;
+
+	if (timeout == 0)
+		timeout = jiffies + msecs_to_jiffies(3);
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || (musb->a_wait_bcon == 0 &&
+				musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+		dev_dbg(musb->controller, "%s active, deleting timer\n",
+				otg_state_string(musb->xceiv->state));
+		del_timer(&glue->timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout) && timer_pending(&glue->timer)) {
+		dev_dbg(musb->controller,
+			"Longer idle timer already pending, ignoring...\n");
+		return;
+	}
+	last_timer = timeout;
+
+	dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
+		otg_state_string(musb->xceiv->state),
+			jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&glue->timer, timeout);
+}
+
+static irqreturn_t dsps_interrupt(int irq, void *hci)
+{
+	struct musb  *musb = hci;
+	void __iomem *reg_base = musb->ctrl_base;
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	unsigned long flags;
+	irqreturn_t ret = IRQ_NONE;
+	u32 epintr, usbintr;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Get endpoint interrupts */
+	epintr = dsps_readl(reg_base, wrp->epintr_status);
+	musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
+	musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
+
+	if (epintr)
+		dsps_writel(reg_base, wrp->epintr_status, epintr);
+
+	/* Get usb core interrupts */
+	usbintr = dsps_readl(reg_base, wrp->coreintr_status);
+	if (!usbintr && !epintr)
+		goto eoi;
+
+	musb->int_usb =	(usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
+	if (usbintr)
+		dsps_writel(reg_base, wrp->coreintr_status, usbintr);
+
+	dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
+			usbintr, epintr);
+	/*
+	 * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
+	 * DSPS IP's missing ID change IRQ.  We need an ID change IRQ to
+	 * switch appropriately between halves of the OTG state machine.
+	 * Managing DEVCTL.SESSION per Mentor docs requires that we know its
+	 * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+	 */
+	if ((usbintr & MUSB_INTR_BABBLE) && is_host_enabled(musb))
+		pr_info("CAUTION: musb: Babble Interrupt Occured\n");
+
+	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
+		int drvvbus = dsps_readl(reg_base, wrp->status);
+		void __iomem *mregs = musb->mregs;
+		u8 devctl = dsps_readb(mregs, MUSB_DEVCTL);
+		int err;
+
+		err = is_host_enabled(musb) && (musb->int_usb &
+						MUSB_INTR_VBUSERROR);
+		if (err) {
+			/*
+			 * The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"-starting sessions
+			 * without waiting for VBUS to stop registering in
+			 * devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+			mod_timer(&glue->timer,
+					jiffies + wrp->poll_seconds * HZ);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (is_host_enabled(musb) && drvvbus) {
+			musb->is_active = 1;
+			MUSB_HST_MODE(musb);
+			musb->xceiv->otg->default_a = 1;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+			del_timer(&glue->timer);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv->otg->default_a = 0;
+			musb->xceiv->state = OTG_STATE_B_IDLE;
+		}
+
+		/* NOTE: this must complete power-on within 100 ms. */
+		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				otg_state_string(musb->xceiv->state),
+				err ? " ERROR" : "",
+				devctl);
+		ret = IRQ_HANDLED;
+	}
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		ret |= musb_interrupt(musb);
+
+ eoi:
+	/* EOI needs to be written for the IRQ to be re-asserted. */
+	if (ret == IRQ_HANDLED || epintr || usbintr)
+		dsps_writel(reg_base, wrp->eoi, 1);
+
+	/* Poll for ID change */
+	if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE)
+		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static int dsps_musb_init(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct omap_musb_board_data *data = plat->board_data;
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 rev, val;
+	int status;
+
+	/* mentor core register starts at offset of 0x400 from musb base */
+	musb->mregs += wrp->musb_core_offset;
+
+	/* NOP driver needs change if supporting dual instance */
+	usb_nop_xceiv_register();
+	musb->xceiv = usb_get_transceiver();
+	if (!musb->xceiv)
+		return -ENODEV;
+
+	/* Returns zero if e.g. not clocked */
+	rev = dsps_readl(reg_base, wrp->revision);
+	if (!rev) {
+		status = -ENODEV;
+		goto err0;
+	}
+
+	if (is_host_enabled(musb))
+		setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
+
+	/* Reset the musb */
+	dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
+
+	/* Start the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(1);
+
+	musb->isr = dsps_interrupt;
+
+	/* reset the otgdisable bit, needed for host mode to work */
+	val = dsps_readl(reg_base, wrp->phy_utmi);
+	val &= ~(1 << wrp->otg_disable);
+	dsps_writel(musb->ctrl_base, wrp->phy_utmi, val);
+
+	/* clear level interrupt */
+	dsps_writel(reg_base, wrp->eoi, 0);
+
+	return 0;
+err0:
+	usb_put_transceiver(musb->xceiv);
+	usb_nop_xceiv_unregister();
+	return status;
+}
+
+static int dsps_musb_exit(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+	struct platform_device *pdev = to_platform_device(dev->parent);
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+
+	if (is_host_enabled(musb))
+		del_timer_sync(&glue->timer);
+
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
+
+	/* NOP driver needs change if supporting dual instance */
+	usb_put_transceiver(musb->xceiv);
+	usb_nop_xceiv_unregister();
+
+	return 0;
+}
+
+static struct musb_platform_ops dsps_ops = {
+	.init		= dsps_musb_init,
+	.exit		= dsps_musb_exit,
+
+	.enable		= dsps_musb_enable,
+	.disable	= dsps_musb_disable,
+
+	.try_idle	= dsps_musb_try_idle,
+};
+
+static u64 musb_dmamask = DMA_BIT_MASK(32);
+
+static int __devinit dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
+{
+	struct device *dev = glue->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct musb_hdrc_platform_data  *pdata = dev->platform_data;
+	struct platform_device	*musb;
+	struct resource *res;
+	struct resource	resources[2];
+	char res_name[10];
+	int ret;
+
+	/* get memory resource */
+	sprintf(res_name, "musb%d", id);
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+	if (!res) {
+		dev_err(dev, "%s get mem resource failed\n", res_name);
+		ret = -ENODEV;
+		goto err0;
+	}
+	res->parent = NULL;
+	resources[0] = *res;
+
+	/* get irq resource */
+	sprintf(res_name, "musb%d-irq", id);
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+	if (!res) {
+		dev_err(dev, "%s get irq resource failed\n", res_name);
+		ret = -ENODEV;
+		goto err0;
+	}
+	strcpy((u8 *)res->name, "mc");
+	res->parent = NULL;
+	resources[1] = *res;
+
+	/* allocate the child platform device */
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(dev, "failed to allocate musb device\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	musb->dev.parent		= dev;
+	musb->dev.dma_mask		= &musb_dmamask;
+	musb->dev.coherent_dma_mask	= musb_dmamask;
+
+	glue->musb			= musb;
+
+	pdata->platform_ops		= &dsps_ops;
+
+	ret = platform_device_add_resources(musb, resources, 2);
+	if (ret) {
+		dev_err(dev, "failed to add resources\n");
+		goto err1;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(dev, "failed to add platform_data\n");
+		goto err1;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(dev, "failed to register musb device\n");
+		goto err1;
+	}
+
+	return 0;
+
+err1:
+	platform_device_put(musb);
+err0:
+	return ret;
+}
+
+static void __devexit dsps_delete_musb_pdev(struct dsps_glue *glue)
+{
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+}
+
+static int __devinit dsps_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	const struct dsps_musb_wrapper *wrp =
+				(struct dsps_musb_wrapper *)id->driver_data;
+	struct dsps_glue *glue;
+	struct resource *iomem;
+	int ret;
+
+	/* allocate glue */
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "unable to allocate glue memory\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	/* get memory resource */
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		dev_err(&pdev->dev, "failed to get usbss mem resourse\n");
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	glue->dev = &pdev->dev;
+
+	glue->wrp = kmemdup(wrp, sizeof(*wrp), GFP_KERNEL);
+	if (!glue->wrp) {
+		dev_err(&pdev->dev, "failed to duplicate wrapper struct memory\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+	platform_set_drvdata(pdev, glue);
+
+	/* create the child platform device for first instances of musb */
+	ret = dsps_create_musb_pdev(glue, 0);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to create child pdev\n");
+		goto err2;
+	}
+
+	/* enable the usbss clocks */
+	pm_runtime_enable(&pdev->dev);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pm_runtime_get_sync FAILED");
+		goto err3;
+	}
+
+	return 0;
+
+err3:
+	pm_runtime_disable(&pdev->dev);
+err2:
+	kfree(glue->wrp);
+err1:
+	kfree(glue);
+err0:
+	return ret;
+}
+static int __devexit dsps_remove(struct platform_device *pdev)
+{
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+
+	/* delete the child platform device */
+	dsps_delete_musb_pdev(glue);
+
+	/* disable usbss clocks */
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	kfree(glue->wrp);
+	kfree(glue);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dsps_suspend(struct device *dev)
+{
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
+
+	return 0;
+}
+
+static int dsps_resume(struct device *dev)
+{
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+
+	/* Start the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(1);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
+
+static const struct dsps_musb_wrapper ti81xx_driver_data __devinitconst = {
+	.revision		= 0x00,
+	.control		= 0x14,
+	.status			= 0x18,
+	.eoi			= 0x24,
+	.epintr_set		= 0x38,
+	.epintr_clear		= 0x40,
+	.epintr_status		= 0x30,
+	.coreintr_set		= 0x3c,
+	.coreintr_clear		= 0x44,
+	.coreintr_status	= 0x34,
+	.phy_utmi		= 0xe0,
+	.mode			= 0xe8,
+	.reset			= 0,
+	.otg_disable		= 21,
+	.iddig			= 8,
+	.usb_shift		= 0,
+	.usb_mask		= 0x1ff,
+	.usb_bitmap		= (0x1ff << 0),
+	.drvvbus		= 8,
+	.txep_shift		= 0,
+	.txep_mask		= 0xffff,
+	.txep_bitmap		= (0xffff << 0),
+	.rxep_shift		= 16,
+	.rxep_mask		= 0xfffe,
+	.rxep_bitmap		= (0xfffe << 16),
+	.musb_core_offset	= 0x400,
+	.poll_seconds		= 2,
+};
+
+static const struct platform_device_id musb_dsps_id_table[] __devinitconst = {
+	{
+		.name	= "musb-ti81xx",
+		.driver_data	= (kernel_ulong_t) &ti81xx_driver_data,
+	},
+	{  },	/* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(platform, musb_dsps_id_table);
+
+static const struct of_device_id musb_dsps_of_match[] __devinitconst = {
+	{ .compatible = "musb-ti81xx", },
+	{ .compatible = "ti,ti81xx-musb", },
+	{ .compatible = "ti,am335x-musb", },
+	{  },
+};
+MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
+
+static struct platform_driver dsps_usbss_driver = {
+	.probe		= dsps_probe,
+	.remove         = __devexit_p(dsps_remove),
+	.driver         = {
+		.name   = "musb-dsps",
+		.pm	= &dsps_pm_ops,
+		.of_match_table	= musb_dsps_of_match,
+	},
+	.id_table	= musb_dsps_id_table,
+};
+
+MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer");
+MODULE_AUTHOR("Ravi B <ravibabu@ti.com>");
+MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init dsps_init(void)
+{
+	return platform_driver_register(&dsps_usbss_driver);
+}
+subsys_initcall(dsps_init);
+
+static void __exit dsps_exit(void)
+{
+	platform_driver_unregister(&dsps_usbss_driver);
+}
+module_exit(dsps_exit);
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index a0a2178974fe..bde6298a9693 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -37,7 +37,9 @@ struct gpio_vbus_data {
 	struct regulator       *vbus_draw;
 	int			vbus_draw_enabled;
 	unsigned		mA;
-	struct work_struct	work;
+	struct delayed_work	work;
+	int			vbus;
+	int			irq;
 };
 
 
@@ -51,8 +53,7 @@ struct gpio_vbus_data {
  * edges might be workable.
  */
 #define VBUS_IRQ_FLAGS \
-	( IRQF_SAMPLE_RANDOM | IRQF_SHARED \
-	| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING )
+	(IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
 
 
 /* interface to regulator framework */
@@ -94,20 +95,26 @@ static int is_vbus_powered(struct gpio_vbus_mach_info *pdata)
 static void gpio_vbus_work(struct work_struct *work)
 {
 	struct gpio_vbus_data *gpio_vbus =
-		container_of(work, struct gpio_vbus_data, work);
+		container_of(work, struct gpio_vbus_data, work.work);
 	struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
-	int gpio, status;
+	int gpio, status, vbus;
 
 	if (!gpio_vbus->phy.otg->gadget)
 		return;
 
+	vbus = is_vbus_powered(pdata);
+	if ((vbus ^ gpio_vbus->vbus) == 0)
+		return;
+	gpio_vbus->vbus = vbus;
+
 	/* Peripheral controllers which manage the pullup themselves won't have
 	 * gpio_pullup configured here.  If it's configured here, we'll do what
 	 * isp1301_omap::b_peripheral() does and enable the pullup here... although
 	 * that may complicate usb_gadget_{,dis}connect() support.
 	 */
 	gpio = pdata->gpio_pullup;
-	if (is_vbus_powered(pdata)) {
+
+	if (vbus) {
 		status = USB_EVENT_VBUS;
 		gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
 		gpio_vbus->phy.last_event = status;
@@ -152,7 +159,7 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
 		otg->gadget ? otg->gadget->name : "none");
 
 	if (otg->gadget)
-		schedule_work(&gpio_vbus->work);
+		schedule_delayed_work(&gpio_vbus->work, msecs_to_jiffies(100));
 
 	return IRQ_HANDLED;
 }
@@ -166,12 +173,11 @@ static int gpio_vbus_set_peripheral(struct usb_otg *otg,
 	struct gpio_vbus_data *gpio_vbus;
 	struct gpio_vbus_mach_info *pdata;
 	struct platform_device *pdev;
-	int gpio, irq;
+	int gpio;
 
 	gpio_vbus = container_of(otg->phy, struct gpio_vbus_data, phy);
 	pdev = to_platform_device(gpio_vbus->dev);
 	pdata = gpio_vbus->dev->platform_data;
-	irq = gpio_to_irq(pdata->gpio_vbus);
 	gpio = pdata->gpio_pullup;
 
 	if (!gadget) {
@@ -195,7 +201,8 @@ static int gpio_vbus_set_peripheral(struct usb_otg *otg,
 	dev_dbg(&pdev->dev, "registered gadget '%s'\n", gadget->name);
 
 	/* initialize connection state */
-	gpio_vbus_irq(irq, pdev);
+	gpio_vbus->vbus = 0; /* start with disconnected */
+	gpio_vbus_irq(gpio_vbus->irq, pdev);
 	return 0;
 }
 
@@ -235,6 +242,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
 	struct gpio_vbus_data *gpio_vbus;
 	struct resource *res;
 	int err, gpio, irq;
+	unsigned long irqflags;
 
 	if (!pdata || !gpio_is_valid(pdata->gpio_vbus))
 		return -EINVAL;
@@ -271,10 +279,13 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (res) {
 		irq = res->start;
-		res->flags &= IRQF_TRIGGER_MASK;
-		res->flags |= IRQF_SAMPLE_RANDOM | IRQF_SHARED;
-	} else
+		irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
+	} else {
 		irq = gpio_to_irq(gpio);
+		irqflags = VBUS_IRQ_FLAGS;
+	}
+
+	gpio_vbus->irq = irq;
 
 	/* if data line pullup is in use, initialize it to "not pulling up" */
 	gpio = pdata->gpio_pullup;
@@ -290,8 +301,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
 		gpio_direction_output(gpio, pdata->gpio_pullup_inverted);
 	}
 
-	err = request_irq(irq, gpio_vbus_irq, VBUS_IRQ_FLAGS,
-		"vbus_detect", pdev);
+	err = request_irq(irq, gpio_vbus_irq, irqflags, "vbus_detect", pdev);
 	if (err) {
 		dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
 			irq, err);
@@ -300,7 +310,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
 
 	ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier);
 
-	INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
+	INIT_DELAYED_WORK(&gpio_vbus->work, gpio_vbus_work);
 
 	gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw");
 	if (IS_ERR(gpio_vbus->vbus_draw)) {
@@ -317,9 +327,12 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
 		goto err_otg;
 	}
 
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+
 	return 0;
 err_otg:
-	free_irq(irq, &pdev->dev);
+	regulator_put(gpio_vbus->vbus_draw);
+	free_irq(irq, pdev);
 err_irq:
 	if (gpio_is_valid(pdata->gpio_pullup))
 		gpio_free(pdata->gpio_pullup);
@@ -337,11 +350,13 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev)
 	struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
 	int gpio = pdata->gpio_vbus;
 
+	device_init_wakeup(&pdev->dev, 0);
+	cancel_delayed_work_sync(&gpio_vbus->work);
 	regulator_put(gpio_vbus->vbus_draw);
 
 	usb_set_transceiver(NULL);
 
-	free_irq(gpio_to_irq(gpio), &pdev->dev);
+	free_irq(gpio_vbus->irq, pdev);
 	if (gpio_is_valid(pdata->gpio_pullup))
 		gpio_free(pdata->gpio_pullup);
 	gpio_free(gpio);
@@ -352,6 +367,33 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int gpio_vbus_pm_suspend(struct device *dev)
+{
+	struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(gpio_vbus->irq);
+
+	return 0;
+}
+
+static int gpio_vbus_pm_resume(struct device *dev)
+{
+	struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(gpio_vbus->irq);
+
+	return 0;
+}
+
+static const struct dev_pm_ops gpio_vbus_dev_pm_ops = {
+	.suspend	= gpio_vbus_pm_suspend,
+	.resume		= gpio_vbus_pm_resume,
+};
+#endif
+
 /* NOTE:  the gpio-vbus device may *NOT* be hotplugged */
 
 MODULE_ALIAS("platform:gpio-vbus");
@@ -360,6 +402,9 @@ static struct platform_driver gpio_vbus_driver = {
 	.driver = {
 		.name  = "gpio-vbus",
 		.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm = &gpio_vbus_dev_pm_ops,
+#endif
 	},
 	.remove  = __exit_p(gpio_vbus_remove),
 };
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index e3fa387ca81e..d2a9a8e691b9 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -455,7 +455,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
 
 	twl->irq_enabled = true;
 	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 			"twl6030_usb", twl);
 	if (status < 0) {
 		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
@@ -467,7 +467,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
 	}
 
 	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 			"twl6030_usb", twl);
 	if (status < 0) {
 		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
new file mode 100644
index 000000000000..3cfabcba7447
--- /dev/null
+++ b/drivers/usb/phy/Kconfig
@@ -0,0 +1,17 @@
+#
+# Physical Layer USB driver configuration
+#
+comment "USB Physical Layer drivers"
+	depends on USB
+
+config USB_ISP1301
+	tristate "NXP ISP1301 USB transceiver support"
+	depends on USB
+	depends on I2C
+	help
+	  Say Y here to add support for the NXP ISP1301 USB transceiver driver.
+	  This chip is typically used as USB transceiver for USB host, gadget
+	  and OTG drivers (to be selected separately).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1301.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
new file mode 100644
index 000000000000..eca095b1a890
--- /dev/null
+++ b/drivers/usb/phy/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for physical layer USB drivers
+#
+
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+
+obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
diff --git a/drivers/usb/phy/isp1301.c b/drivers/usb/phy/isp1301.c
new file mode 100644
index 000000000000..b19f4932a037
--- /dev/null
+++ b/drivers/usb/phy/isp1301.c
@@ -0,0 +1,77 @@
+/*
+ * NXP ISP1301 USB transceiver driver
+ *
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * Author: Roland Stigge <stigge@antcom.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+
+#define DRV_NAME		"isp1301"
+
+#define ISP1301_I2C_ADDR	0x2C
+
+static const unsigned short normal_i2c[] = {
+	ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END
+};
+
+static const struct i2c_device_id isp1301_id[] = {
+	{ "isp1301", 0 },
+	{ }
+};
+
+static struct i2c_client *isp1301_i2c_client;
+
+static int isp1301_probe(struct i2c_client *client,
+			 const struct i2c_device_id *i2c_id)
+{
+	isp1301_i2c_client = client;
+	return 0;
+}
+
+static int isp1301_remove(struct i2c_client *client)
+{
+	return 0;
+}
+
+static struct i2c_driver isp1301_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.probe = isp1301_probe,
+	.remove = isp1301_remove,
+	.id_table = isp1301_id,
+};
+
+module_i2c_driver(isp1301_driver);
+
+static int match(struct device *dev, void *data)
+{
+	struct device_node *node = (struct device_node *)data;
+	return (dev->of_node == node) &&
+		(dev->driver == &isp1301_driver.driver);
+}
+
+struct i2c_client *isp1301_get_client(struct device_node *node)
+{
+	if (node) { /* reference of ISP1301 I2C node via DT */
+		struct device *dev = bus_find_device(&i2c_bus_type, NULL,
+						     node, match);
+		if (!dev)
+			return NULL;
+		return to_i2c_client(dev);
+	} else { /* non-DT: only one ISP1301 chip supported */
+		return isp1301_i2c_client;
+	}
+}
+EXPORT_SYMBOL_GPL(isp1301_get_client);
+
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 00bd2a5e0362..28478ce26c34 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -55,6 +55,7 @@ struct usbhsg_gpriv {
 #define USBHSG_STATUS_STARTED		(1 << 0)
 #define USBHSG_STATUS_REGISTERD		(1 << 1)
 #define USBHSG_STATUS_WEDGE		(1 << 2)
+#define USBHSG_STATUS_SELF_POWERED	(1 << 3)
 };
 
 struct usbhsg_recip_handle {
@@ -333,7 +334,10 @@ static int usbhsg_recip_handler_std_get_device(struct usbhs_priv *priv,
 					       struct usb_ctrlrequest *ctrl)
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
-	unsigned short status = 1 << USB_DEVICE_SELF_POWERED;
+	unsigned short status = 0;
+
+	if (usbhsg_status_has(gpriv, USBHSG_STATUS_SELF_POWERED))
+		status = 1 << USB_DEVICE_SELF_POWERED;
 
 	__usbhsg_recip_send_status(gpriv, status);
 
@@ -879,8 +883,21 @@ static int usbhsg_get_frame(struct usb_gadget *gadget)
 	return usbhs_frame_get_num(priv);
 }
 
+static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
+
+	if (is_self)
+		usbhsg_status_set(gpriv, USBHSG_STATUS_SELF_POWERED);
+	else
+		usbhsg_status_clr(gpriv, USBHSG_STATUS_SELF_POWERED);
+
+	return 0;
+}
+
 static struct usb_gadget_ops usbhsg_gadget_ops = {
 	.get_frame		= usbhsg_get_frame,
+	.set_selfpowered	= usbhsg_set_selfpowered,
 	.udc_start		= usbhsg_gadget_start,
 	.udc_stop		= usbhsg_gadget_stop,
 };
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 7141d6599060..325d2910f9f9 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -669,6 +669,15 @@ config USB_SERIAL_SSU100
 	  To compile this driver as a module, choose M here: the
 	  module will be called ssu100.
 
+config USB_SERIAL_QT2
+	tristate "USB Quatech Serial Driver for USB 2 devices"
+	help
+	  Say Y here if you want to use the Quatech USB 2
+	  serial adapters.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called quatech-serial.
+
 config USB_SERIAL_DEBUG
 	tristate "USB Debugging Device"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 07f198ee0486..1dc483a8bfc7 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_USB_SERIAL_OTI6858)		+= oti6858.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
 obj-$(CONFIG_USB_SERIAL_QCAUX)			+= qcaux.o
 obj-$(CONFIG_USB_SERIAL_QUALCOMM)		+= qcserial.o
+obj-$(CONFIG_USB_SERIAL_QT2)			+= quatech2.o
 obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
 obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+= siemens_mpi.o
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index eec4fb9a35c1..d634e6635632 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -111,13 +111,14 @@ static int aircable_probe(struct usb_serial *serial,
 	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
 		endpoint = &iface_desc->endpoint[i].desc;
 		if (usb_endpoint_is_bulk_out(endpoint)) {
-			dbg("found bulk out on endpoint %d", i);
+			dev_dbg(&serial->dev->dev,
+				"found bulk out on endpoint %d\n", i);
 			++num_bulk_out;
 		}
 	}
 
 	if (num_bulk_out == 0) {
-		dbg("Invalid interface, discarding");
+		dev_dbg(&serial->dev->dev, "Invalid interface, discarding\n");
 		return -ENODEV;
 	}
 
@@ -133,7 +134,7 @@ static int aircable_process_packet(struct tty_struct *tty,
 		packet += HCI_HEADER_LENGTH;
 	}
 	if (len <= 0) {
-		dbg("%s - malformed packet", __func__);
+		dev_dbg(&port->dev, "%s - malformed packet\n", __func__);
 		return 0;
 	}
 
@@ -170,13 +171,6 @@ static void aircable_process_read_urb(struct urb *urb)
 	tty_kref_put(tty);
 }
 
-static struct usb_driver aircable_driver = {
-	.name =		"aircable",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver aircable_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -196,7 +190,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&aircable_device, NULL
 };
 
-module_usb_serial_driver(aircable_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index f99f47100dd8..f8ce97d8b0ad 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -265,7 +265,7 @@ static void ark3116_set_termios(struct tty_struct *tty,
 	hcr = (cflag & CRTSCTS) ? 0x03 : 0x00;
 
 	/* calc baudrate */
-	dbg("%s - setting bps to %d", __func__, bps);
+	dev_dbg(&port->dev, "%s - setting bps to %d\n", __func__, bps);
 	eval = 0;
 	switch (bps) {
 	case 0:
@@ -292,8 +292,8 @@ static void ark3116_set_termios(struct tty_struct *tty,
 	/* keep old LCR_SBC bit */
 	lcr |= (priv->lcr & UART_LCR_SBC);
 
-	dbg("%s - setting hcr:0x%02x,lcr:0x%02x,quot:%d",
-	    __func__, hcr, lcr, quot);
+	dev_dbg(&port->dev, "%s - setting hcr:0x%02x,lcr:0x%02x,quot:%d\n",
+		__func__, hcr, lcr, quot);
 
 	/* handshake control */
 	if (priv->hcr != hcr) {
@@ -375,8 +375,9 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	result = usb_serial_generic_open(tty, port);
 	if (result) {
-		dbg("%s - usb_serial_generic_open failed: %d",
-		    __func__, result);
+		dev_dbg(&port->dev,
+			"%s - usb_serial_generic_open failed: %d\n",
+			__func__, result);
 		goto err_out;
 	}
 
@@ -622,24 +623,26 @@ static void ark3116_read_int_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
 		break;
 	case 0: /* success */
 		/* discovered this by trail and error... */
 		if ((urb->actual_length == 4) && (data[0] == 0xe8)) {
 			const __u8 id = data[1]&UART_IIR_ID;
-			dbg("%s: iir=%02x", __func__, data[1]);
+			dev_dbg(&port->dev, "%s: iir=%02x\n", __func__, data[1]);
 			if (id == UART_IIR_MSI) {
-				dbg("%s: msr=%02x", __func__, data[3]);
+				dev_dbg(&port->dev, "%s: msr=%02x\n",
+					__func__, data[3]);
 				ark3116_update_msr(port, data[3]);
 				break;
 			} else if (id == UART_IIR_RLSI) {
-				dbg("%s: lsr=%02x", __func__, data[2]);
+				dev_dbg(&port->dev, "%s: lsr=%02x\n",
+					__func__, data[2]);
 				ark3116_update_lsr(port, data[2]);
 				break;
 			}
@@ -714,13 +717,6 @@ static void ark3116_process_read_urb(struct urb *urb)
 	tty_kref_put(tty);
 }
 
-static struct usb_driver ark3116_driver = {
-	.name =		"ark3116",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver ark3116_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -747,7 +743,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&ark3116_device, NULL
 };
 
-module_usb_serial_driver(ark3116_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index a52e0d2cec31..6b7365632951 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -2,17 +2,17 @@
  * Belkin USB Serial Adapter Driver
  *
  *  Copyright (C) 2000		William Greathouse (wgreathouse@smva.com)
- *  Copyright (C) 2000-2001 	Greg Kroah-Hartman (greg@kroah.com)
+ *  Copyright (C) 2000-2001	Greg Kroah-Hartman (greg@kroah.com)
  *  Copyright (C) 2010		Johan Hovold (jhovold@gmail.com)
  *
  *  This program is largely derived from work by the linux-usb group
  *  and associated source files.  Please see the usb/serial files for
  *  individual credits and copyrights.
  *
- * 	This program is free software; you can redistribute it and/or modify
- * 	it under the terms of the GNU General Public License as published by
- * 	the Free Software Foundation; either version 2 of the License, or
- * 	(at your option) any later version.
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
@@ -62,7 +62,7 @@ static int  belkin_sa_tiocmset(struct tty_struct *tty,
 					unsigned int set, unsigned int clear);
 
 
-static const struct usb_device_id id_table_combined[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
 	{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
 	{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
@@ -71,14 +71,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
 	{ }	/* Terminating entry */
 };
-MODULE_DEVICE_TABLE(usb, id_table_combined);
-
-static struct usb_driver belkin_driver = {
-	.name =		"belkin",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-};
+MODULE_DEVICE_TABLE(usb, id_table);
 
 /* All of the device info needed for the serial converters */
 static struct usb_serial_driver belkin_device = {
@@ -87,7 +80,7 @@ static struct usb_serial_driver belkin_device = {
 		.name =		"belkin",
 	},
 	.description =		"Belkin / Peracom / GoHubs USB Serial Adapter",
-	.id_table =		id_table_combined,
+	.id_table =		id_table,
 	.num_ports =		1,
 	.open =			belkin_sa_open,
 	.close =		belkin_sa_close,
@@ -159,8 +152,6 @@ static void belkin_sa_release(struct usb_serial *serial)
 {
 	int i;
 
-	dbg("%s", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i)
 		kfree(usb_get_serial_port_data(serial->port[i]));
 }
@@ -170,8 +161,6 @@ static int belkin_sa_open(struct tty_struct *tty,
 {
 	int retval;
 
-	dbg("%s port %d", __func__, port->number);
-
 	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (retval) {
 		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
@@ -187,8 +176,6 @@ static int belkin_sa_open(struct tty_struct *tty,
 
 static void belkin_sa_close(struct usb_serial_port *port)
 {
-	dbg("%s port %d", __func__, port->number);
-
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 }
@@ -210,12 +197,12 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
 		goto exit;
 	}
 
@@ -403,7 +390,9 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 		case CS8:
 			urb_value = BELKIN_SA_DATA_BITS(8);
 			break;
-		default: dbg("CSIZE was not CS5-CS8, using default of 8");
+		default:
+			dev_dbg(&port->dev,
+				"CSIZE was not CS5-CS8, using default of 8\n");
 			urb_value = BELKIN_SA_DATA_BITS(8);
 			break;
 		}
@@ -463,8 +452,6 @@ static int belkin_sa_tiocmget(struct tty_struct *tty)
 	unsigned long control_state;
 	unsigned long flags;
 
-	dbg("%s", __func__);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	control_state = priv->control_state;
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -484,8 +471,6 @@ static int belkin_sa_tiocmset(struct tty_struct *tty,
 	int rts = 0;
 	int dtr = 0;
 
-	dbg("%s", __func__);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	control_state = priv->control_state;
 
@@ -524,7 +509,7 @@ exit:
 	return retval;
 }
 
-module_usb_serial_driver(belkin_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index ed8adb052ca7..f398d1e34474 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -124,8 +124,15 @@ static ssize_t store_new_id(struct device_driver *driver,
 	return retval;
 }
 
+static ssize_t show_dynids(struct device_driver *driver, char *buf)
+{
+	struct usb_serial_driver *usb_drv = to_usb_serial_driver(driver);
+
+	return usb_show_dynids(&usb_drv->dynids, buf);
+}
+
 static struct driver_attribute drv_attrs[] = {
-	__ATTR(new_id, S_IWUSR, NULL, store_new_id),
+	__ATTR(new_id, S_IRUGO | S_IWUSR, show_dynids, store_new_id),
 	__ATTR_NULL,
 };
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index aaab32db31d0..cabd1b15ddce 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -125,8 +125,6 @@ static int ch341_set_baudrate(struct usb_device *dev,
 	unsigned long factor;
 	short divisor;
 
-	dbg("ch341_set_baudrate(%d)", priv->baud_rate);
-
 	if (!priv->baud_rate)
 		return -EINVAL;
 	factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
@@ -153,7 +151,6 @@ static int ch341_set_baudrate(struct usb_device *dev,
 
 static int ch341_set_handshake(struct usb_device *dev, u8 control)
 {
-	dbg("ch341_set_handshake(0x%02x)", control);
 	return ch341_control_out(dev, 0xa4, ~control, 0);
 }
 
@@ -164,8 +161,6 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 	const unsigned size = 8;
 	unsigned long flags;
 
-	dbg("ch341_get_status()");
-
 	buffer = kmalloc(size, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
@@ -196,8 +191,6 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 	int r;
 	const unsigned size = 8;
 
-	dbg("ch341_configure()");
-
 	buffer = kmalloc(size, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
@@ -254,8 +247,6 @@ static int ch341_attach(struct usb_serial *serial)
 	struct ch341_private *priv;
 	int r;
 
-	dbg("ch341_attach()");
-
 	/* private data */
 	priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
 	if (!priv)
@@ -290,7 +281,6 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
 	/* drop DTR and RTS */
 	spin_lock_irqsave(&priv->lock, flags);
 	if (on)
@@ -304,8 +294,6 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 
 static void ch341_close(struct usb_serial_port *port)
 {
-	dbg("%s - port %d", __func__, port->number);
-
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 }
@@ -318,8 +306,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
 	int r;
 
-	dbg("ch341_open()");
-
 	priv->baud_rate = DEFAULT_BAUD_RATE;
 
 	r = ch341_configure(serial->dev, priv);
@@ -358,8 +344,6 @@ static void ch341_set_termios(struct tty_struct *tty,
 	unsigned baud_rate;
 	unsigned long flags;
 
-	dbg("ch341_set_termios()");
-
 	baud_rate = tty_get_baud_rate(tty);
 
 	priv->baud_rate = baud_rate;
@@ -393,8 +377,6 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 	uint16_t reg_contents;
 	uint8_t *break_reg;
 
-	dbg("%s()", __func__);
-
 	break_reg = kmalloc(2, GFP_KERNEL);
 	if (!break_reg) {
 		dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
@@ -461,8 +443,6 @@ static void ch341_read_int_callback(struct urb *urb)
 	unsigned int actual_length = urb->actual_length;
 	int status;
 
-	dbg("%s (%d)", __func__, port->number);
-
 	switch (urb->status) {
 	case 0:
 		/* success */
@@ -580,8 +560,6 @@ static int ch341_tiocmget(struct tty_struct *tty)
 	u8 status;
 	unsigned int result;
 
-	dbg("%s (%d)", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	mcr = priv->line_control;
 	status = priv->line_status;
@@ -599,35 +577,18 @@ static int ch341_tiocmget(struct tty_struct *tty)
 	return result;
 }
 
-
-static int ch341_reset_resume(struct usb_interface *intf)
+static int ch341_reset_resume(struct usb_serial *serial)
 {
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_serial *serial = NULL;
 	struct ch341_private *priv;
 
-	serial = usb_get_intfdata(intf);
 	priv = usb_get_serial_port_data(serial->port[0]);
 
-	/*reconfigure ch341 serial port after bus-reset*/
-	ch341_configure(dev, priv);
-
-	usb_serial_resume(intf);
+	/* reconfigure ch341 serial port after bus-reset */
+	ch341_configure(serial->dev, priv);
 
 	return 0;
 }
 
-static struct usb_driver ch341_driver = {
-	.name		= "ch341",
-	.probe		= usb_serial_probe,
-	.disconnect	= usb_serial_disconnect,
-	.suspend	= usb_serial_suspend,
-	.resume		= usb_serial_resume,
-	.reset_resume	= ch341_reset_resume,
-	.id_table	= id_table,
-	.supports_autosuspend =	1,
-};
-
 static struct usb_serial_driver ch341_device = {
 	.driver = {
 		.owner	= THIS_MODULE,
@@ -646,13 +607,14 @@ static struct usb_serial_driver ch341_device = {
 	.tiocmset          = ch341_tiocmset,
 	.read_int_callback = ch341_read_int_callback,
 	.attach            = ch341_attach,
+	.reset_resume      = ch341_reset_resume,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
 	&ch341_device, NULL
 };
 
-module_usb_serial_driver(ch341_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 1ee6b2ab0f89..b9cca6dcde07 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -113,7 +113,8 @@ static int usb_console_setup(struct console *co, char *options)
 	serial = usb_serial_get_by_index(co->index);
 	if (serial == NULL) {
 		/* no device is connected yet, sorry :( */
-		err("No USB device connected to ttyUSB%i", co->index);
+		printk(KERN_ERR "No USB device connected to ttyUSB%i\n",
+		       co->index);
 		return -ENODEV;
 	}
 
@@ -137,7 +138,7 @@ static int usb_console_setup(struct console *co, char *options)
 			tty = kzalloc(sizeof(*tty), GFP_KERNEL);
 			if (!tty) {
 				retval = -ENOMEM;
-				err("no more memory");
+				dev_err(&port->dev, "no more memory\n");
 				goto reset_open_count;
 			}
 			kref_init(&tty->kref);
@@ -146,7 +147,7 @@ static int usb_console_setup(struct console *co, char *options)
 			tty->index = co->index;
 			if (tty_init_termios(tty)) {
 				retval = -ENOMEM;
-				err("no more memory");
+				dev_err(&port->dev, "no more memory\n");
 				goto free_tty;
 			}
 		}
@@ -159,7 +160,7 @@ static int usb_console_setup(struct console *co, char *options)
 			retval = usb_serial_generic_open(NULL, port);
 
 		if (retval) {
-			err("could not open USB console port");
+			dev_err(&port->dev, "could not open USB console port\n");
 			goto fail;
 		}
 
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index ec30f95ef399..1b1926200ba7 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -156,13 +156,6 @@ struct cp210x_port_private {
 	__u8			bInterfaceNumber;
 };
 
-static struct usb_driver cp210x_driver = {
-	.name		= "cp210x",
-	.probe		= usb_serial_probe,
-	.disconnect	= usb_serial_disconnect,
-	.id_table	= id_table,
-};
-
 static struct usb_serial_driver cp210x_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -188,8 +181,10 @@ static struct usb_serial_driver * const serial_drivers[] = {
 };
 
 /* Config request types */
-#define REQTYPE_HOST_TO_DEVICE	0x41
-#define REQTYPE_DEVICE_TO_HOST	0xc1
+#define REQTYPE_HOST_TO_INTERFACE	0x41
+#define REQTYPE_INTERFACE_TO_HOST	0xc1
+#define REQTYPE_HOST_TO_DEVICE	0x40
+#define REQTYPE_DEVICE_TO_HOST	0xc0
 
 /* Config request codes */
 #define CP210X_IFC_ENABLE	0x00
@@ -286,7 +281,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
+				request, REQTYPE_INTERFACE_TO_HOST, 0x0000,
 				port_priv->bInterfaceNumber, buf, size,
 				USB_CTRL_GET_TIMEOUT);
 
@@ -340,13 +335,13 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 	if (size > 2) {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
-				request, REQTYPE_HOST_TO_DEVICE, 0x0000,
+				request, REQTYPE_HOST_TO_INTERFACE, 0x0000,
 				port_priv->bInterfaceNumber, buf, size,
 				USB_CTRL_SET_TIMEOUT);
 	} else {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0),
-				request, REQTYPE_HOST_TO_DEVICE, data[0],
+				request, REQTYPE_HOST_TO_INTERFACE, data[0],
 				port_priv->bInterfaceNumber, NULL, 0,
 				USB_CTRL_SET_TIMEOUT);
 	}
@@ -422,8 +417,6 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	result = cp210x_set_config_single(port, CP210X_IFC_ENABLE,
 								UART_ENABLE);
 	if (result) {
@@ -443,8 +436,6 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void cp210x_close(struct usb_serial_port *port)
 {
-	dbg("%s - port %d", __func__, port->number);
-
 	usb_serial_generic_close(port);
 
 	mutex_lock(&port->serial->disc_mutex);
@@ -488,8 +479,6 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
 	unsigned int baud;
 	unsigned int bits;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
 
 	dbg("%s - baud rate = %d", __func__, baud);
@@ -787,8 +776,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
 {
 	unsigned int control = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (set & TIOCM_RTS) {
 		control |= CONTROL_RTS;
 		control |= CONTROL_WRITE_RTS;
@@ -825,8 +812,6 @@ static int cp210x_tiocmget (struct tty_struct *tty)
 	unsigned int control;
 	int result;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
 
 	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
@@ -846,7 +831,6 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int state;
 
-	dbg("%s - port %d", __func__, port->number);
 	if (break_state == 0)
 		state = BREAK_OFF;
 	else
@@ -891,7 +875,7 @@ static void cp210x_release(struct usb_serial *serial)
 	}
 }
 
-module_usb_serial_driver(cp210x_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index d39b9418f2fb..3aa0b530f68e 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -77,13 +77,6 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver cyberjack_driver = {
-	.name =		"cyberjack",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver cyberjack_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -122,8 +115,6 @@ static int cyberjack_startup(struct usb_serial *serial)
 	struct cyberjack_private *priv;
 	int i;
 
-	dbg("%s", __func__);
-
 	/* allocate the private data structure */
 	priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
 	if (!priv)
@@ -155,8 +146,6 @@ static void cyberjack_disconnect(struct usb_serial *serial)
 {
 	int i;
 
-	dbg("%s", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i)
 		usb_kill_urb(serial->port[i]->interrupt_in_urb);
 }
@@ -165,8 +154,6 @@ static void cyberjack_release(struct usb_serial *serial)
 {
 	int i;
 
-	dbg("%s", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i) {
 		/* My special items, the standard routines free my urbs */
 		kfree(usb_get_serial_port_data(serial->port[i]));
@@ -180,8 +167,6 @@ static int  cyberjack_open(struct tty_struct *tty,
 	unsigned long flags;
 	int result = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	dbg("%s - usb_clear_halt", __func__);
 	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 
@@ -197,8 +182,6 @@ static int  cyberjack_open(struct tty_struct *tty,
 
 static void cyberjack_close(struct usb_serial_port *port)
 {
-	dbg("%s - port %d", __func__, port->number);
-
 	if (port->serial->dev) {
 		/* shutdown any bulk reads that might be going on */
 		usb_kill_urb(port->write_urb);
@@ -214,8 +197,6 @@ static int cyberjack_write(struct tty_struct *tty,
 	int result;
 	int wrexpected;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (count == 0) {
 		dbg("%s - write request of 0 bytes", __func__);
 		return 0;
@@ -307,8 +288,6 @@ static void cyberjack_read_int_callback(struct urb *urb)
 	int status = urb->status;
 	int result;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	/* the urb might have been killed. */
 	if (status)
 		return;
@@ -367,8 +346,6 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 	int result;
 	int status = urb->status;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
 	if (status) {
@@ -417,8 +394,6 @@ static void cyberjack_write_bulk_callback(struct urb *urb)
 	struct cyberjack_private *priv = usb_get_serial_port_data(port);
 	int status = urb->status;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	set_bit(0, &port->write_urbs_free);
 	if (status) {
 		dbg("%s - nonzero write bulk status received: %d",
@@ -475,7 +450,7 @@ exit:
 	usb_serial_port_softint(port);
 }
 
-module_usb_serial_driver(cyberjack_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index afc886c75d2f..b78c34eb5d3f 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -89,13 +89,6 @@ static const struct usb_device_id id_table_combined[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table_combined);
 
-static struct usb_driver cypress_driver = {
-	.name =		"cypress",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-};
-
 enum packet_format {
 	packet_format_1,  /* b0:status, b1:payload count */
 	packet_format_2   /* b0[7:3]:status, b0[2:0]:payload count */
@@ -305,8 +298,6 @@ static int cypress_serial_control(struct tty_struct *tty,
 	const unsigned int feature_len = 5;
 	unsigned long flags;
 
-	dbg("%s", __func__);
-
 	priv = usb_get_serial_port_data(port);
 
 	if (!priv->comm_is_ok)
@@ -451,8 +442,6 @@ static int generic_startup(struct usb_serial *serial)
 	struct cypress_private *priv;
 	struct usb_serial_port *port = serial->port[0];
 
-	dbg("%s - port %d", __func__, port->number);
-
 	priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -505,8 +494,6 @@ static int cypress_earthmate_startup(struct usb_serial *serial)
 	struct cypress_private *priv;
 	struct usb_serial_port *port = serial->port[0];
 
-	dbg("%s", __func__);
-
 	if (generic_startup(serial)) {
 		dbg("%s - Failed setting up port %d", __func__,
 				port->number);
@@ -537,8 +524,6 @@ static int cypress_hidcom_startup(struct usb_serial *serial)
 {
 	struct cypress_private *priv;
 
-	dbg("%s", __func__);
-
 	if (generic_startup(serial)) {
 		dbg("%s - Failed setting up port %d", __func__,
 				serial->port[0]->number);
@@ -556,8 +541,6 @@ static int cypress_ca42v2_startup(struct usb_serial *serial)
 {
 	struct cypress_private *priv;
 
-	dbg("%s", __func__);
-
 	if (generic_startup(serial)) {
 		dbg("%s - Failed setting up port %d", __func__,
 				serial->port[0]->number);
@@ -575,10 +558,7 @@ static void cypress_release(struct usb_serial *serial)
 {
 	struct cypress_private *priv;
 
-	dbg("%s - port %d", __func__, serial->port[0]->number);
-
 	/* all open ports are closed at this point */
-
 	priv = usb_get_serial_port_data(serial->port[0]);
 
 	if (priv) {
@@ -595,8 +575,6 @@ static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 	unsigned long flags;
 	int result = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (!priv->comm_is_ok)
 		return -EIO;
 
@@ -661,8 +639,6 @@ static void cypress_close(struct usb_serial_port *port)
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	/* writing is potentially harmful, lock must be taken */
 	mutex_lock(&port->serial->disc_mutex);
 	if (port->serial->disconnected) {
@@ -720,7 +696,6 @@ static void cypress_send(struct usb_serial_port *port)
 	if (!priv->comm_is_ok)
 		return;
 
-	dbg("%s - port %d", __func__, port->number);
 	dbg("%s - interrupt out size is %d", __func__,
 						port->interrupt_out_size);
 
@@ -828,8 +803,6 @@ static int cypress_write_room(struct tty_struct *tty)
 	int room = 0;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	room = kfifo_avail(&priv->write_fifo);
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -847,8 +820,6 @@ static int cypress_tiocmget(struct tty_struct *tty)
 	unsigned int result = 0;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	control = priv->line_control;
 	status = priv->current_status;
@@ -874,8 +845,6 @@ static int cypress_tiocmset(struct tty_struct *tty,
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	if (set & TIOCM_RTS)
 		priv->line_control |= CONTROL_RTS;
@@ -948,8 +917,6 @@ static void cypress_set_termios(struct tty_struct *tty,
 	__u8 oldlines;
 	int linechange = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	/* We can't clean this one up as we don't know the device type
 	   early enough */
@@ -1096,8 +1063,6 @@ static int cypress_chars_in_buffer(struct tty_struct *tty)
 	int chars = 0;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	chars = kfifo_len(&priv->write_fifo);
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -1112,8 +1077,6 @@ static void cypress_throttle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irq(&priv->lock);
 	priv->rx_flags = THROTTLED;
 	spin_unlock_irq(&priv->lock);
@@ -1126,8 +1089,6 @@ static void cypress_unthrottle(struct tty_struct *tty)
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled, result;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irq(&priv->lock);
 	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
 	priv->rx_flags = 0;
@@ -1161,8 +1122,6 @@ static void cypress_read_int_callback(struct urb *urb)
 	int i = 0;
 	int status = urb->status;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	switch (status) {
 	case 0: /* success */
 		break;
@@ -1303,8 +1262,6 @@ static void cypress_write_int_callback(struct urb *urb)
 	int result;
 	int status = urb->status;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -1346,7 +1303,7 @@ static void cypress_write_int_callback(struct urb *urb)
 	cypress_send(port);
 }
 
-module_usb_serial_driver(cypress_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 999f91bf70de..b5cd838093ef 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -271,14 +271,6 @@ static const struct usb_device_id id_table_4[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table_combined);
 
-static struct usb_driver digi_driver = {
-	.name =		"digi_acceleport",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-};
-
-
 /* device info needed for the Digi serial converter */
 
 static struct usb_serial_driver digi_acceleport_2_device = {
@@ -657,9 +649,6 @@ static void digi_rx_throttle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
-
-	dbg("digi_rx_throttle: TOP: port=%d", priv->dp_port_num);
-
 	/* stop receiving characters by not resubmitting the read urb */
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 	priv->dp_throttled = 1;
@@ -675,8 +664,6 @@ static void digi_rx_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
-	dbg("digi_rx_unthrottle: TOP: port=%d", priv->dp_port_num);
-
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 
 	/* restart read chain */
@@ -904,8 +891,6 @@ static int digi_tiocmget(struct tty_struct *tty)
 	unsigned int val;
 	unsigned long flags;
 
-	dbg("%s: TOP: port=%d", __func__, priv->dp_port_num);
-
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 	val = priv->dp_modem_signals;
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
@@ -921,8 +906,6 @@ static int digi_tiocmset(struct tty_struct *tty,
 	unsigned int val;
 	unsigned long flags;
 
-	dbg("%s: TOP: port=%d", __func__, priv->dp_port_num);
-
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
 	val = (priv->dp_modem_signals & ~clear) | set;
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
@@ -1013,8 +996,6 @@ static void digi_write_bulk_callback(struct urb *urb)
 	int ret = 0;
 	int status = urb->status;
 
-	dbg("digi_write_bulk_callback: TOP, status=%d", status);
-
 	/* port and serial sanity check */
 	if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
 		pr_err("%s: port or port->private is NULL, status=%d\n",
@@ -1121,8 +1102,6 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	struct ktermios not_termios;
 
-	dbg("digi_open: TOP: port=%d", priv->dp_port_num);
-
 	/* be sure the device is started up */
 	if (digi_startup_device(port->serial) != 0)
 		return -ENXIO;
@@ -1160,8 +1139,6 @@ static void digi_close(struct usb_serial_port *port)
 	unsigned char buf[32];
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
-	dbg("digi_close: TOP: port=%d", priv->dp_port_num);
-
 	mutex_lock(&port->serial->disc_mutex);
 	/* if disconnected, just clear flags */
 	if (port->serial->disconnected)
@@ -1220,7 +1197,6 @@ exit:
 	wake_up_interruptible(&priv->dp_close_wait);
 	spin_unlock_irq(&priv->dp_port_lock);
 	mutex_unlock(&port->serial->disc_mutex);
-	dbg("digi_close: done");
 }
 
 
@@ -1269,8 +1245,6 @@ static int digi_startup(struct usb_serial *serial)
 	struct digi_port *priv;
 	struct digi_serial *serial_priv;
 
-	dbg("digi_startup: TOP");
-
 	/* allocate the private data structures for all ports */
 	/* number of regular ports + 1 for the out-of-band port */
 	for (i = 0; i < serial->type->num_ports + 1; i++) {
@@ -1325,7 +1299,6 @@ static int digi_startup(struct usb_serial *serial)
 static void digi_disconnect(struct usb_serial *serial)
 {
 	int i;
-	dbg("digi_disconnect: TOP, in_interrupt()=%ld", in_interrupt());
 
 	/* stop reads and writes on all ports */
 	for (i = 0; i < serial->type->num_ports + 1; i++) {
@@ -1338,7 +1311,6 @@ static void digi_disconnect(struct usb_serial *serial)
 static void digi_release(struct usb_serial *serial)
 {
 	int i;
-	dbg("digi_release: TOP, in_interrupt()=%ld", in_interrupt());
 
 	/* free the private data structures for all ports */
 	/* number of regular ports + 1 for the out-of-band port */
@@ -1356,8 +1328,6 @@ static void digi_read_bulk_callback(struct urb *urb)
 	int ret;
 	int status = urb->status;
 
-	dbg("digi_read_bulk_callback: TOP");
-
 	/* port sanity check, do not resubmit if port is not valid */
 	if (port == NULL)
 		return;
@@ -1507,9 +1477,6 @@ static int digi_read_oob_callback(struct urb *urb)
 	int i;
 	unsigned int rts;
 
-	dbg("digi_read_oob_callback: port=%d, len=%d",
-			priv->dp_port_num, urb->actual_length);
-
 	/* handle each oob command */
 	for (i = 0; i < urb->actual_length - 3;) {
 		opcode = ((unsigned char *)urb->transfer_buffer)[i++];
@@ -1580,7 +1547,7 @@ static int digi_read_oob_callback(struct urb *urb)
 
 }
 
-module_usb_serial_driver(digi_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 5b99fc09e327..cdf61dd07318 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -51,13 +51,6 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver empeg_driver = {
-	.name =		"empeg",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver empeg_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -80,14 +73,12 @@ static int empeg_startup(struct usb_serial *serial)
 {
 	int r;
 
-	dbg("%s", __func__);
-
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
 		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
 			serial->dev->actconfig->desc.bConfigurationValue);
 		return -ENODEV;
 	}
-	dbg("%s - reset config", __func__);
+
 	r = usb_reset_configuration(serial->dev);
 
 	/* continue on with initialization */
@@ -138,7 +129,7 @@ static void empeg_init_termios(struct tty_struct *tty)
 	tty_encode_baud_rate(tty, 115200, 115200);
 }
 
-module_usb_serial_driver(empeg_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index 3cfc762f5056..800e8eb60003 100644
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -26,7 +26,6 @@ int ezusb_writememory(struct usb_serial *serial, int address,
 	int result;
 	unsigned char *transfer_buffer;
 
-	/* dbg("ezusb_writememory %x, %d", address, length); */
 	if (!serial->dev) {
 		printk(KERN_ERR "ezusb: %s - no physical device present, "
 		       "failing.\n", __func__);
@@ -50,7 +49,6 @@ int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit)
 {
 	int response;
 
-	/* dbg("%s - %d", __func__, reset_bit); */
 	response = ezusb_writememory(serial, CPUCS_REG, &reset_bit, 1, 0xa0);
 	if (response < 0)
 		dev_err(&serial->dev->dev, "%s- %d failed\n",
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 88c0b1963920..499b15fd82f1 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -68,8 +68,6 @@ static void f81232_read_int_callback(struct urb *urb)
 	int status = urb->status;
 	int retval;
 
-	dbg("%s (%d)", __func__, port->number);
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -78,12 +76,12 @@ static void f81232_read_int_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    status);
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    status);
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
 		goto exit;
 	}
 
@@ -133,7 +131,7 @@ static void f81232_process_read_urb(struct urb *urb)
 		tty_flag = TTY_PARITY;
 	else if (line_status & UART_FRAME_ERROR)
 		tty_flag = TTY_FRAME;
-	dbg("%s - tty_flag = %d", __func__, tty_flag);
+	dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
 
 	/* overrun is special, not associated with a char */
 	if (line_status & UART_OVERRUN_ERROR)
@@ -203,7 +201,6 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (tty)
 		f81232_set_termios(tty, port, &tmp_termios);
 
-	dbg("%s - submitting interrupt urb", __func__);
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
@@ -293,7 +290,9 @@ static int f81232_ioctl(struct tty_struct *tty,
 {
 	struct serial_struct ser;
 	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+	dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__,
+		port->number, cmd);
 
 	switch (cmd) {
 	case TIOCGSERIAL:
@@ -309,10 +308,12 @@ static int f81232_ioctl(struct tty_struct *tty,
 		return 0;
 
 	case TIOCMIWAIT:
-		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,
+			port->number);
 		return wait_modem_info(port, arg);
 	default:
-		dbg("%s not supported = 0x%04x", __func__, cmd);
+		dev_dbg(&port->dev, "%s not supported = 0x%04x\n",
+			__func__, cmd);
 		break;
 	}
 	return -ENOIOCTLCMD;
@@ -353,24 +354,12 @@ static void f81232_release(struct usb_serial *serial)
 	}
 }
 
-static struct usb_driver f81232_driver = {
-	.name =		"f81232",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-	.suspend =      usb_serial_suspend,
-	.resume =       usb_serial_resume,
-	.no_dynamic_id = 	1,
-	.supports_autosuspend =	1,
-};
-
 static struct usb_serial_driver f81232_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
 		.name =		"f81232",
 	},
 	.id_table =		id_table,
-	.usb_driver = 		&f81232_driver,
 	.num_ports =		1,
 	.bulk_in_size =		256,
 	.bulk_out_size =	256,
@@ -394,7 +383,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	NULL,
 };
 
-module_usb_serial_driver(f81232_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
 MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org");
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 02e7f2d32d52..8c084ea34e26 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -809,6 +809,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
+	{ USB_DEVICE(PI_VID, PI_E861_PID) },
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -861,13 +862,6 @@ static struct usb_device_id id_table_combined [] = {
 
 MODULE_DEVICE_TABLE(usb, id_table_combined);
 
-static struct usb_driver ftdi_driver = {
-	.name =		"ftdi_sio",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-};
-
 static const char *ftdi_chip_name[] = {
 	[SIO] = "SIO",	/* the serial part of FT8U100AX */
 	[FT8U232AM] = "FT8U232AM",
@@ -1285,8 +1279,6 @@ static int read_latency_timer(struct usb_serial_port *port)
 	unsigned char *buf;
 	int rv;
 
-	dbg("%s", __func__);
-
 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -1593,8 +1585,6 @@ static int create_sysfs_attrs(struct usb_serial_port *port)
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
 
-	dbg("%s", __func__);
-
 	/* XXX I've no idea if the original SIO supports the event_char
 	 * sysfs parameter, so I'm playing it safe.  */
 	if (priv->chip_type != SIO) {
@@ -1619,8 +1609,6 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s", __func__);
-
 	/* XXX see create_sysfs_attrs */
 	if (priv->chip_type != SIO) {
 		device_remove_file(&port->dev, &dev_attr_event_char);
@@ -1667,8 +1655,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
 
 
-	dbg("%s", __func__);
-
 	priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
 	if (!priv) {
 		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
@@ -1704,8 +1690,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 /* Called from usbserial:serial_probe */
 static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
 {
-	dbg("%s", __func__);
-
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 77;
 	priv->force_baud = 38400;
@@ -1716,8 +1700,6 @@ static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
 
 static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
 {
-	dbg("%s", __func__);
-
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 240;
 	priv->force_baud = 38400;
@@ -1767,8 +1749,6 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
 	struct usb_device *udev = serial->dev;
 	struct usb_interface *interface = serial->interface;
 
-	dbg("%s", __func__);
-
 	if (interface == udev->actconfig->interface[0]) {
 		dev_info(&udev->dev,
 			 "Ignoring serial port reserved for JTAG\n");
@@ -1782,8 +1762,6 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 {
 	struct usb_device *udev = serial->dev;
 
-	dbg("%s", __func__);
-
 	if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
 	    (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
 		return ftdi_jtag_probe(serial);
@@ -1800,8 +1778,6 @@ static int ftdi_stmclite_probe(struct usb_serial *serial)
 	struct usb_device *udev = serial->dev;
 	struct usb_interface *interface = serial->interface;
 
-	dbg("%s", __func__);
-
 	if (interface == udev->actconfig->interface[2])
 		return 0;
 
@@ -1839,8 +1815,6 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s", __func__);
-
 	priv->dev_gone = true;
 	wake_up_interruptible_all(&priv->delta_msr_wait);
 
@@ -1858,8 +1832,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int result;
 
-	dbg("%s", __func__);
-
 	/* No error checking for this (will get errors later anyway) */
 	/* See ftdi_sio.h for description of what is reset */
 	usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -1918,8 +1890,6 @@ static void ftdi_close(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s", __func__);
-
 	usb_serial_generic_close(port);
 	kref_put(&priv->kref, ftdi_sio_priv_release);
 }
@@ -1976,8 +1946,6 @@ static int ftdi_process_packet(struct tty_struct *tty,
 	char flag;
 	char *ch;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (len < 2) {
 		dbg("malformed packet");
 		return 0;
@@ -2121,8 +2089,6 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	unsigned char vstop;
 	unsigned char vstart;
 
-	dbg("%s", __func__);
-
 	/* Force baud rate if this device requires it, unless it is set to
 	   B0. */
 	if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
@@ -2295,8 +2261,6 @@ static int ftdi_tiocmget(struct tty_struct *tty)
 	int len;
 	int ret;
 
-	dbg("%s TIOCMGET", __func__);
-
 	buf = kmalloc(2, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -2346,7 +2310,7 @@ static int ftdi_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s TIOCMSET", __func__);
+
 	return update_mctrl(port, set, clear);
 }
 
@@ -2435,7 +2399,6 @@ static int __init ftdi_init(void)
 {
 	int retval;
 
-	dbg("%s", __func__);
 	if (vendor > 0 && product > 0) {
 		/* Add user specified VID/PID to reserved element of table. */
 		int i;
@@ -2445,7 +2408,7 @@ static int __init ftdi_init(void)
 		id_table_combined[i].idVendor = vendor;
 		id_table_combined[i].idProduct = product;
 	}
-	retval = usb_serial_register_drivers(&ftdi_driver, serial_drivers);
+	retval = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, id_table_combined);
 	if (retval == 0)
 		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
 			       DRIVER_DESC "\n");
@@ -2454,9 +2417,7 @@ static int __init ftdi_init(void)
 
 static void __exit ftdi_exit(void)
 {
-	dbg("%s", __func__);
-
-	usb_serial_deregister_drivers(&ftdi_driver, serial_drivers);
+	usb_serial_deregister_drivers(serial_drivers);
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 0838baf892f3..f3c7c78ede33 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -785,6 +785,14 @@
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
 #define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
 
+
+/*
+ * Physik Instrumente
+ * http://www.physikinstrumente.com/en/products/
+ */
+#define PI_VID              0x1a72  /* Vendor ID */
+#define PI_E861_PID         0x1008  /* E-861 piezo controller USB connection */
+
 /*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
  * http://winglucofacts.com/cables/
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 4577b3607922..235707961ca3 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -24,13 +24,6 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver funsoft_driver = {
-	.name =		"funsoft",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver funsoft_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -44,7 +37,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&funsoft_device, NULL
 };
 
-module_usb_serial_driver(funsoft_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index e8eb6347bf3a..346c15a51066 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -216,16 +216,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(GARMIN_VENDOR_ID, 3) },
 	{ }					/* Terminating entry */
 };
-
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver garmin_driver = {
-	.name =		"garmin_gps",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 
 static inline int getLayerId(const __u8 *usbPacket)
 {
@@ -345,8 +337,6 @@ static void pkt_clear(struct garmin_data *garmin_data_p)
 	unsigned long flags;
 	struct garmin_packet *result = NULL;
 
-	dbg("%s", __func__);
-
 	spin_lock_irqsave(&garmin_data_p->lock, flags);
 	while (!list_empty(&garmin_data_p->pktlist)) {
 		result = (struct garmin_packet *)garmin_data_p->pktlist.next;
@@ -939,8 +929,6 @@ static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port)
 	int status = 0;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&garmin_data_p->lock, flags);
 	garmin_data_p->mode  = initial_mode;
 	garmin_data_p->count = 0;
@@ -996,8 +984,6 @@ static void garmin_write_bulk_callback(struct urb *urb)
 		struct garmin_data *garmin_data_p =
 					usb_get_serial_port_data(port);
 
-		dbg("%s - port %d", __func__, port->number);
-
 		if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) {
 
 			if (garmin_data_p->mode == MODE_GARMIN_SERIAL) {
@@ -1027,9 +1013,6 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 	unsigned char *buffer;
 	int status;
 
-	dbg("%s - port %d, state %d", __func__, port->number,
-		garmin_data_p->state);
-
 	spin_lock_irqsave(&garmin_data_p->lock, flags);
 	garmin_data_p->flags &= ~FLAGS_DROP_DATA;
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
@@ -1224,8 +1207,6 @@ static void garmin_read_bulk_callback(struct urb *urb)
 	int status = urb->status;
 	int retval;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (!serial) {
 		dbg("%s - bad serial pointer, exiting", __func__);
 		return;
@@ -1384,7 +1365,6 @@ static void garmin_throttle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
-	dbg("%s - port %d", __func__, port->number);
 	/* set flag, data received will be put into a queue
 	   for later processing */
 	spin_lock_irq(&garmin_data_p->lock);
@@ -1399,7 +1379,6 @@ static void garmin_unthrottle(struct tty_struct *tty)
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 	int status;
 
-	dbg("%s - port %d", __func__, port->number);
 	spin_lock_irq(&garmin_data_p->lock);
 	garmin_data_p->flags &= ~FLAGS_THROTTLED;
 	spin_unlock_irq(&garmin_data_p->lock);
@@ -1441,8 +1420,6 @@ static int garmin_attach(struct usb_serial *serial)
 	struct usb_serial_port *port = serial->port[0];
 	struct garmin_data *garmin_data_p = NULL;
 
-	dbg("%s", __func__);
-
 	garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
 	if (garmin_data_p == NULL) {
 		dev_err(&port->dev, "%s - Out of memory\n", __func__);
@@ -1471,8 +1448,6 @@ static void garmin_disconnect(struct usb_serial *serial)
 	struct usb_serial_port *port = serial->port[0];
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
-	dbg("%s", __func__);
-
 	usb_kill_urb(port->interrupt_in_urb);
 	del_timer_sync(&garmin_data_p->timer);
 }
@@ -1483,8 +1458,6 @@ static void garmin_release(struct usb_serial *serial)
 	struct usb_serial_port *port = serial->port[0];
 	struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
 
-	dbg("%s", __func__);
-
 	kfree(garmin_data_p);
 }
 
@@ -1516,7 +1489,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&garmin_device, NULL
 };
 
-module_usb_serial_driver(garmin_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 664deb63807c..105a6d898ca4 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -28,9 +28,6 @@ static int debug;
 
 #ifdef CONFIG_USB_SERIAL_GENERIC
 
-static int generic_probe(struct usb_interface *interface,
-			 const struct usb_device_id *id);
-
 static __u16 vendor  = 0x05f9;
 static __u16 product = 0xffff;
 
@@ -49,13 +46,6 @@ static const struct usb_device_id generic_serial_ids[] = {
 	{}
 };
 
-static struct usb_driver generic_driver = {
-	.name =		"usbserial_generic",
-	.probe =	generic_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	generic_serial_ids,
-};
-
 /* All of the device info needed for the Generic Serial Converter */
 struct usb_serial_driver usb_serial_generic_device = {
 	.driver = {
@@ -75,16 +65,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&usb_serial_generic_device, NULL
 };
 
-static int generic_probe(struct usb_interface *interface,
-			       const struct usb_device_id *id)
-{
-	const struct usb_device_id *id_pattern;
-
-	id_pattern = usb_match_id(interface, generic_device_ids);
-	if (id_pattern != NULL)
-		return usb_serial_probe(interface, id);
-	return -ENODEV;
-}
 #endif
 
 int usb_serial_generic_register(int _debug)
@@ -99,7 +79,7 @@ int usb_serial_generic_register(int _debug)
 		USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
 
 	/* register our generic driver with ourselves */
-	retval = usb_serial_register_drivers(&generic_driver, serial_drivers);
+	retval = usb_serial_register_drivers(serial_drivers, "usbserial_generic", generic_serial_ids);
 #endif
 	return retval;
 }
@@ -108,7 +88,7 @@ void usb_serial_generic_deregister(void)
 {
 #ifdef CONFIG_USB_SERIAL_GENERIC
 	/* remove our generic driver */
-	usb_serial_deregister_drivers(&generic_driver, serial_drivers);
+	usb_serial_deregister_drivers(serial_drivers);
 #endif
 }
 
@@ -117,8 +97,6 @@ int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port
 	int result = 0;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	/* clear the throttle flags */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = 0;
@@ -139,12 +117,9 @@ static void generic_cleanup(struct usb_serial_port *port)
 	unsigned long flags;
 	int i;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (serial->dev) {
 		/* shutdown any bulk transfers that might be going on */
 		if (port->bulk_out_size) {
-			usb_kill_urb(port->write_urb);
 			for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
 				usb_kill_urb(port->write_urbs[i]);
 
@@ -161,7 +136,6 @@ static void generic_cleanup(struct usb_serial_port *port)
 
 void usb_serial_generic_close(struct usb_serial_port *port)
 {
-	dbg("%s - port %d", __func__, port->number);
 	generic_cleanup(port);
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_close);
@@ -249,8 +223,6 @@ int usb_serial_generic_write(struct tty_struct *tty,
 {
 	int result;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	/* only do something if we have a bulk out endpoint */
 	if (!port->bulk_out_size)
 		return -ENODEV;
@@ -273,8 +245,6 @@ int usb_serial_generic_write_room(struct tty_struct *tty)
 	unsigned long flags;
 	int room;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (!port->bulk_out_size)
 		return 0;
 
@@ -282,7 +252,7 @@ int usb_serial_generic_write_room(struct tty_struct *tty)
 	room = kfifo_avail(&port->write_fifo);
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	dbg("%s - returns %d", __func__, room);
+	dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
 	return room;
 }
 
@@ -292,8 +262,6 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 	unsigned long flags;
 	int chars;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (!port->bulk_out_size)
 		return 0;
 
@@ -301,7 +269,7 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 	chars = kfifo_len(&port->write_fifo) + port->tx_bytes;
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	dbg("%s - returns %d", __func__, chars);
+	dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
 	return chars;
 }
 
@@ -313,7 +281,8 @@ static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
 	if (!test_and_clear_bit(index, &port->read_urbs_free))
 		return 0;
 
-	dbg("%s - port %d, urb %d\n", __func__, port->number, index);
+	dev_dbg(&port->dev, "%s - port %d, urb %d\n", __func__,
+		port->number, index);
 
 	res = usb_submit_urb(port->read_urbs[index], mem_flags);
 	if (res) {
@@ -335,8 +304,6 @@ int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
 	int res;
 	int i;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
 		res = usb_serial_generic_submit_read_urb(port, i, mem_flags);
 		if (res)
@@ -395,10 +362,12 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
 	}
 	set_bit(i, &port->read_urbs_free);
 
-	dbg("%s - port %d, urb %d, len %d\n", __func__, port->number, i,
-							urb->actual_length);
+	dev_dbg(&port->dev, "%s - port %d, urb %d, len %d\n",
+		__func__, port->number, i, urb->actual_length);
+
 	if (urb->status) {
-		dbg("%s - non-zero urb status: %d\n", __func__, urb->status);
+		dev_dbg(&port->dev, "%s - non-zero urb status: %d\n",
+			__func__, urb->status);
 		return;
 	}
 
@@ -424,8 +393,6 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 	int status = urb->status;
 	int i;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
 		if (port->write_urbs[i] == urb)
 			break;
@@ -436,7 +403,8 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	if (status) {
-		dbg("%s - non-zero urb status: %d", __func__, status);
+		dev_dbg(&port->dev, "%s - non-zero urb status: %d\n",
+			__func__, status);
 
 		spin_lock_irqsave(&port->lock, flags);
 		kfifo_reset_out(&port->write_fifo);
@@ -454,8 +422,6 @@ void usb_serial_generic_throttle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	/* Set the throttle request flag. It will be picked up
 	 * by usb_serial_generic_read_bulk_callback(). */
 	spin_lock_irqsave(&port->lock, flags);
@@ -469,8 +435,6 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	int was_throttled;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	/* Clear the throttle flags */
 	spin_lock_irq(&port->lock);
 	was_throttled = port->throttled;
@@ -525,7 +489,8 @@ void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
 {
 	struct tty_port *port = &usb_port->port;
 
-	dbg("%s - port %d, status %d", __func__, usb_port->number, status);
+	dev_dbg(&usb_port->dev, "%s - port %d, status %d\n", __func__,
+		usb_port->number, status);
 
 	if (status)
 		wake_up_interruptible(&port->open_wait);
@@ -566,8 +531,6 @@ void usb_serial_generic_disconnect(struct usb_serial *serial)
 {
 	int i;
 
-	dbg("%s", __func__);
-
 	/* stop reads and writes on all ports */
 	for (i = 0; i < serial->num_ports; ++i)
 		generic_cleanup(serial->port[i]);
@@ -576,5 +539,4 @@ EXPORT_SYMBOL_GPL(usb_serial_generic_disconnect);
 
 void usb_serial_generic_release(struct usb_serial *serial)
 {
-	dbg("%s", __func__);
 }
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 2563e788c9b3..0bbaf21a9d1e 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -36,13 +36,6 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver hp49gp_driver = {
-	.name =		"hp4X",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver hp49gp_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -56,7 +49,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&hp49gp_device, NULL
 };
 
-module_usb_serial_driver(hp49gp_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 323e87235711..e1f5ccd1e8f8 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -3181,7 +3181,7 @@ static void edge_release(struct usb_serial *serial)
 	kfree(edge_serial);
 }
 
-module_usb_serial_driver(io_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index d0e7c9affb6f..350afddb55ba 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -95,13 +95,6 @@ static const struct usb_device_id id_table_combined[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table_combined);
 
-static struct usb_driver io_driver = {
-	.name =		"io_edgeport",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-};
-
 static struct usb_serial_driver edgeport_2port_device = {
 	.driver = {
 		.owner		= THIS_MODULE,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 40a95a7fe383..3936904c6419 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -197,14 +197,6 @@ static const struct usb_device_id id_table_combined[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table_combined);
 
-static struct usb_driver io_driver = {
-	.name =		"io_ti",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-};
-
-
 static unsigned char OperationalMajorVersion;
 static unsigned char OperationalMinorVersion;
 static unsigned short OperationalBuildNumber;
@@ -547,6 +539,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 {
 	int baud_rate;
 	struct tty_struct *tty = tty_port_tty_get(&port->port->port);
+	struct usb_serial *serial = port->port->serial;
 	wait_queue_t wait;
 	unsigned long flags;
 
@@ -561,7 +554,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (kfifo_len(&port->write_fifo) == 0
 		|| timeout == 0 || signal_pending(current)
-		|| !usb_get_intfdata(port->port->serial->interface))
+		|| serial->disconnected)
 			/* disconnect */
 			break;
 		spin_unlock_irqrestore(&port->ep_lock, flags);
@@ -578,7 +571,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 	/* wait for data to drain from the device */
 	timeout += jiffies;
 	while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
-	&& usb_get_intfdata(port->port->serial->interface)) {
+						&& !serial->disconnected) {
 		/* not disconnected */
 		if (!tx_active(port))
 			break;
@@ -586,7 +579,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 	}
 
 	/* disconnected */
-	if (!usb_get_intfdata(port->port->serial->interface))
+	if (serial->disconnected)
 		return;
 
 	/* wait one more character time, based on baud rate */
@@ -2003,8 +1996,8 @@ static void edge_close(struct usb_serial_port *port)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
+	struct usb_serial *serial = port->serial;
 	int port_number;
-	int status;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -2028,12 +2021,18 @@ static void edge_close(struct usb_serial_port *port)
 	 * send a close port command to it */
 	dbg("%s - send umpc_close_port", __func__);
 	port_number = port->number - port->serial->minor;
-	status = send_cmd(port->serial->dev,
+
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected) {
+		send_cmd(serial->dev,
 				     UMPC_CLOSE_PORT,
 				     (__u8)(UMPM_UART1_PORT + port_number),
 				     0,
 				     NULL,
 				     0);
+	}
+	mutex_unlock(&serial->disc_mutex);
+
 	mutex_lock(&edge_serial->es_lock);
 	--edge_port->edge_serial->num_ports_open;
 	if (edge_port->edge_serial->num_ports_open <= 0) {
@@ -2783,7 +2782,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&edgeport_1port_device, &edgeport_2port_device, NULL
 };
 
-module_usb_serial_driver(io_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 10c02b8b5664..c85a7eb87d4e 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -33,7 +33,6 @@
 #define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>"
 #define DRIVER_DESC "USB PocketPC PDA driver"
 
-static __u16 product, vendor;
 static bool debug;
 static int connect_retries = KP_RETRIES;
 static int initial_wait;
@@ -45,8 +44,6 @@ static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
 
 static struct usb_device_id ipaq_id_table [] = {
-	/* The first entry is a placeholder for the insmod-specified device */
-	{ USB_DEVICE(0x049F, 0x0003) },
 	{ USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */
 	{ USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */
 	{ USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */
@@ -505,13 +502,6 @@ static struct usb_device_id ipaq_id_table [] = {
 
 MODULE_DEVICE_TABLE(usb, ipaq_id_table);
 
-static struct usb_driver ipaq_driver = {
-	.name =		"ipaq",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	ipaq_id_table,
-};
-
 
 /* All of the device info needed for the Compaq iPAQ */
 static struct usb_serial_driver ipaq_device = {
@@ -539,8 +529,6 @@ static int ipaq_open(struct tty_struct *tty,
 	int			result = 0;
 	int			retries = connect_retries;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	msleep(1000*initial_wait);
 
 	/*
@@ -577,7 +565,7 @@ static int ipaq_calc_num_ports(struct usb_serial *serial)
 	 */
 	int ipaq_num_ports = 1;
 
-	dbg("%s - numberofendpoints: %d", __FUNCTION__,
+	dev_dbg(&serial->dev->dev, "%s - numberofendpoints: %d\n", __func__,
 		(int)serial->interface->cur_altsetting->desc.bNumEndpoints);
 
 	/*
@@ -596,8 +584,6 @@ static int ipaq_calc_num_ports(struct usb_serial *serial)
 
 static int ipaq_startup(struct usb_serial *serial)
 {
-	dbg("%s", __func__);
-
 	/* Some of the devices in ipaq_id_table[] are composite, and we
 	 * shouldn't bind to all the interfaces.  This test will rule out
 	 * some obviously invalid possibilities.
@@ -617,36 +603,14 @@ static int ipaq_startup(struct usb_serial *serial)
 		return -ENODEV;
 	}
 
-	dbg("%s - iPAQ module configured for %d ports",
-		__FUNCTION__, serial->num_ports);
+	dev_dbg(&serial->dev->dev,
+		"%s - iPAQ module configured for %d ports\n", __func__,
+		serial->num_ports);
 
 	return usb_reset_configuration(serial->dev);
 }
 
-static int __init ipaq_init(void)
-{
-	int retval;
-
-	if (vendor) {
-		ipaq_id_table[0].idVendor = vendor;
-		ipaq_id_table[0].idProduct = product;
-	}
-
-	retval = usb_serial_register_drivers(&ipaq_driver, serial_drivers);
-	if (retval == 0)
-		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-			       DRIVER_DESC "\n");
-	return retval;
-}
-
-static void __exit ipaq_exit(void)
-{
-	usb_serial_deregister_drivers(&ipaq_driver, serial_drivers);
-}
-
-
-module_init(ipaq_init);
-module_exit(ipaq_exit);
+module_usb_serial_driver(serial_drivers, ipaq_id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -655,12 +619,6 @@ MODULE_LICENSE("GPL");
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
 
-module_param(vendor, ushort, 0);
-MODULE_PARM_DESC(vendor, "User specified USB idVendor");
-
-module_param(product, ushort, 0);
-MODULE_PARM_DESC(product, "User specified USB idProduct");
-
 module_param(connect_retries, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(connect_retries,
 		"Maximum number of connect retries (one second each)");
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 76a06406e26a..5811d34b6c6b 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -132,19 +132,11 @@ enum {
 
 #define IPW_WANTS_TO_SEND	0x30
 
-static const struct usb_device_id usb_ipw_ids[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(IPW_VID, IPW_PID) },
 	{ },
 };
-
-MODULE_DEVICE_TABLE(usb, usb_ipw_ids);
-
-static struct usb_driver usb_ipw_driver = {
-	.name =		"ipwtty",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	usb_ipw_ids,
-};
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static bool debug;
 
@@ -155,8 +147,6 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 	u8 *buf_flow_init;
 	int result;
 
-	dbg("%s", __func__);
-
 	buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL);
 	if (!buf_flow_init)
 		return -ENOMEM;
@@ -317,7 +307,7 @@ static struct usb_serial_driver ipw_device = {
 		.name =		"ipw",
 	},
 	.description =		"IPWireless converter",
-	.id_table =		usb_ipw_ids,
+	.id_table =		id_table,
 	.num_ports =		1,
 	.disconnect =		usb_wwan_disconnect,
 	.open =			ipw_open,
@@ -333,7 +323,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&ipw_device, NULL
 };
 
-module_usb_serial_driver(usb_ipw_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 /* Module information */
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 84965cd65c76..fc09414c960f 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -77,13 +77,6 @@ static const struct usb_device_id ir_id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, ir_id_table);
 
-static struct usb_driver ir_driver = {
-	.name		= "ir-usb",
-	.probe		= usb_serial_probe,
-	.disconnect	= usb_serial_disconnect,
-	.id_table	= ir_id_table,
-};
-
 static struct usb_serial_driver ir_device = {
 	.driver	= {
 		.owner	= THIS_MODULE,
@@ -103,18 +96,21 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&ir_device, NULL
 };
 
-static inline void irda_usb_dump_class_desc(struct usb_irda_cs_descriptor *desc)
+static inline void irda_usb_dump_class_desc(struct usb_serial *serial,
+					    struct usb_irda_cs_descriptor *desc)
 {
-	dbg("bLength=%x", desc->bLength);
-	dbg("bDescriptorType=%x", desc->bDescriptorType);
-	dbg("bcdSpecRevision=%x", __le16_to_cpu(desc->bcdSpecRevision));
-	dbg("bmDataSize=%x", desc->bmDataSize);
-	dbg("bmWindowSize=%x", desc->bmWindowSize);
-	dbg("bmMinTurnaroundTime=%d", desc->bmMinTurnaroundTime);
-	dbg("wBaudRate=%x", __le16_to_cpu(desc->wBaudRate));
-	dbg("bmAdditionalBOFs=%x", desc->bmAdditionalBOFs);
-	dbg("bIrdaRateSniff=%x", desc->bIrdaRateSniff);
-	dbg("bMaxUnicastList=%x", desc->bMaxUnicastList);
+	struct device *dev = &serial->dev->dev;
+
+	dev_dbg(dev, "bLength=%x\n", desc->bLength);
+	dev_dbg(dev, "bDescriptorType=%x\n", desc->bDescriptorType);
+	dev_dbg(dev, "bcdSpecRevision=%x\n", __le16_to_cpu(desc->bcdSpecRevision));
+	dev_dbg(dev, "bmDataSize=%x\n", desc->bmDataSize);
+	dev_dbg(dev, "bmWindowSize=%x\n", desc->bmWindowSize);
+	dev_dbg(dev, "bmMinTurnaroundTime=%d\n", desc->bmMinTurnaroundTime);
+	dev_dbg(dev, "wBaudRate=%x\n", __le16_to_cpu(desc->wBaudRate));
+	dev_dbg(dev, "bmAdditionalBOFs=%x\n", desc->bmAdditionalBOFs);
+	dev_dbg(dev, "bIrdaRateSniff=%x\n", desc->bIrdaRateSniff);
+	dev_dbg(dev, "bMaxUnicastList=%x\n", desc->bMaxUnicastList);
 }
 
 /*------------------------------------------------------------------*/
@@ -130,8 +126,9 @@ static inline void irda_usb_dump_class_desc(struct usb_irda_cs_descriptor *desc)
  * Based on the same function in drivers/net/irda/irda-usb.c
  */
 static struct usb_irda_cs_descriptor *
-irda_usb_find_class_desc(struct usb_device *dev, unsigned int ifnum)
+irda_usb_find_class_desc(struct usb_serial *serial, unsigned int ifnum)
 {
+	struct usb_device *dev = serial->dev;
 	struct usb_irda_cs_descriptor *desc;
 	int ret;
 
@@ -144,20 +141,20 @@ irda_usb_find_class_desc(struct usb_device *dev, unsigned int ifnum)
 			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
 			0, ifnum, desc, sizeof(*desc), 1000);
 
-	dbg("%s -  ret=%d", __func__, ret);
+	dev_dbg(&serial->dev->dev, "%s -  ret=%d\n", __func__, ret);
 	if (ret < sizeof(*desc)) {
-		dbg("%s - class descriptor read %s (%d)",
-				__func__,
-				(ret < 0) ? "failed" : "too short",
-				ret);
+		dev_dbg(&serial->dev->dev,
+			"%s - class descriptor read %s (%d)\n", __func__,
+			(ret < 0) ? "failed" : "too short", ret);
 		goto error;
 	}
 	if (desc->bDescriptorType != USB_DT_CS_IRDA) {
-		dbg("%s - bad class descriptor type", __func__);
+		dev_dbg(&serial->dev->dev, "%s - bad class descriptor type\n",
+			__func__);
 		goto error;
 	}
 
-	irda_usb_dump_class_desc(desc);
+	irda_usb_dump_class_desc(serial, desc);
 	return desc;
 
 error:
@@ -207,14 +204,15 @@ static int ir_startup(struct usb_serial *serial)
 {
 	struct usb_irda_cs_descriptor *irda_desc;
 
-	irda_desc = irda_usb_find_class_desc(serial->dev, 0);
+	irda_desc = irda_usb_find_class_desc(serial, 0);
 	if (!irda_desc) {
 		dev_err(&serial->dev->dev,
 			"IRDA class descriptor not found, device not bound\n");
 		return -ENODEV;
 	}
 
-	dbg("%s - Baud rates supported:%s%s%s%s%s%s%s%s%s",
+	dev_dbg(&serial->dev->dev,
+		"%s - Baud rates supported:%s%s%s%s%s%s%s%s%s\n",
 		__func__,
 		(irda_desc->wBaudRate & USB_IRDA_BR_2400) ? " 2400" : "",
 		(irda_desc->wBaudRate & USB_IRDA_BR_9600) ? " 9600" : "",
@@ -264,8 +262,6 @@ static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int i;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
 		port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET;
 
@@ -322,15 +318,11 @@ static void ir_process_read_urb(struct urb *urb)
 
 static void ir_set_termios_callback(struct urb *urb)
 {
-	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
 	kfree(urb->transfer_buffer);
 
-	if (status)
-		dbg("%s - non-zero urb status: %d", __func__, status);
+	if (urb->status)
+		dev_dbg(&urb->dev->dev, "%s - non-zero urb status: %d\n",
+			__func__, urb->status);
 }
 
 static void ir_set_termios(struct tty_struct *tty,
@@ -342,8 +334,6 @@ static void ir_set_termios(struct tty_struct *tty,
 	speed_t baud;
 	int ir_baud;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	baud = tty_get_baud_rate(tty);
 
 	/*
@@ -447,7 +437,7 @@ static int __init ir_init(void)
 		ir_device.bulk_out_size = buffer_size;
 	}
 
-	retval = usb_serial_register_drivers(&ir_driver, serial_drivers);
+	retval = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ir_id_table);
 	if (retval == 0)
 		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
 			       DRIVER_DESC "\n");
@@ -456,7 +446,7 @@ static int __init ir_init(void)
 
 static void __exit ir_exit(void)
 {
-	usb_serial_deregister_drivers(&ir_driver, serial_drivers);
+	usb_serial_deregister_drivers(serial_drivers);
 }
 
 
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index f2192d527db0..22b1eb5040b7 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -51,13 +51,6 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver iuu_driver = {
-	.name = "iuu_phoenix",
-	.probe = usb_serial_probe,
-	.disconnect = usb_serial_disconnect,
-	.id_table = id_table,
-};
-
 /* turbo parameter */
 static int boost = 100;
 static int clockmode = 1;
@@ -135,8 +128,6 @@ static void iuu_release(struct usb_serial *serial)
 	if (!port)
 		return;
 
-	dbg("%s", __func__);
-
 	if (priv) {
 		iuu_free_buf(priv);
 		dbg("%s - I will free all", __func__);
@@ -198,8 +189,6 @@ static void iuu_rxcmd(struct urb *urb)
 	int result;
 	int status = urb->status;
 
-	dbg("%s - enter", __func__);
-
 	if (status) {
 		dbg("%s - status = %d", __func__, status);
 		/* error stop all */
@@ -221,7 +210,6 @@ static int iuu_reset(struct usb_serial_port *port, u8 wt)
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 	int result;
 	char *buf_ptr = port->write_urb->transfer_buffer;
-	dbg("%s - enter", __func__);
 
 	/* Prepare the reset sequence */
 
@@ -255,8 +243,6 @@ static void iuu_update_status_callback(struct urb *urb)
 	u8 *st;
 	int status = urb->status;
 
-	dbg("%s - enter", __func__);
-
 	if (status) {
 		dbg("%s - status = %d", __func__, status);
 		/* error stop all */
@@ -299,8 +285,6 @@ static int iuu_status(struct usb_serial_port *port)
 {
 	int result;
 
-	dbg("%s - enter", __func__);
-
 	memset(port->write_urb->transfer_buffer, IUU_GET_STATE_REGISTER, 1);
 	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
 			  usb_sndbulkpipe(port->serial->dev,
@@ -318,8 +302,6 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 	struct usb_serial *serial = port->serial;
 	int actual = 0;
 
-	dbg("%s - enter", __func__);
-
 	/* send the data out the bulk port */
 
 	status =
@@ -341,10 +323,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 	struct usb_serial *serial = port->serial;
 	int actual = 0;
 
-	dbg("%s - enter", __func__);
-
 	/* send the data out the bulk port */
-
 	status =
 	    usb_bulk_msg(serial->dev,
 			 usb_rcvbulkpipe(serial->dev,
@@ -367,8 +346,6 @@ static int iuu_led(struct usb_serial_port *port, unsigned int R,
 	if (!buf)
 		return -ENOMEM;
 
-	dbg("%s - enter", __func__);
-
 	buf[0] = IUU_SET_LED;
 	buf[1] = R & 0xFF;
 	buf[2] = (R >> 8) & 0xFF;
@@ -460,8 +437,6 @@ static int iuu_clk(struct usb_serial_port *port, int dwFrq)
 	unsigned int P2 = 0;
 	int frq = (int)dwFrq;
 
-	dbg("%s - enter", __func__);
-
 	if (frq == 0) {
 		priv->buf[Count++] = IUU_UART_WRITE_I2C;
 		priv->buf[Count++] = FrqGenAdr << 1;
@@ -590,8 +565,6 @@ static int iuu_uart_flush(struct usb_serial_port *port)
 	u8 rxcmd = IUU_UART_RX;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s - enter", __func__);
-
 	if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0)
 		return -EIO;
 
@@ -630,8 +603,6 @@ static void read_buf_callback(struct urb *urb)
 	struct tty_struct *tty;
 	int status = urb->status;
 
-	dbg("%s - status = %d", __func__, status);
-
 	if (status) {
 		if (status == -EPROTO) {
 			/* reschedule needed */
@@ -659,7 +630,6 @@ static int iuu_bulk_write(struct usb_serial_port *port)
 	int i;
 	int buf_len;
 	char *buf_ptr = port->write_urb->transfer_buffer;
-	dbg("%s - enter", __func__);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	*buf_ptr++ = IUU_UART_ESC;
@@ -691,7 +661,6 @@ static int iuu_bulk_write(struct usb_serial_port *port)
 static int iuu_read_buf(struct usb_serial_port *port, int len)
 {
 	int result;
-	dbg("%s - enter", __func__);
 
 	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 			  usb_rcvbulkpipe(port->serial->dev,
@@ -713,8 +682,6 @@ static void iuu_uart_read_callback(struct urb *urb)
 	unsigned char *data = urb->transfer_buffer;
 	priv->poll++;
 
-	dbg("%s - enter", __func__);
-
 	if (status) {
 		dbg("%s - status = %d", __func__, status);
 		/* error stop all */
@@ -771,7 +738,6 @@ static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
 {
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	dbg("%s - enter", __func__);
 
 	if (count > 256)
 		return -ENOMEM;
@@ -792,8 +758,6 @@ static void read_rxcmd_callback(struct urb *urb)
 	int result;
 	int status = urb->status;
 
-	dbg("%s - status = %d", __func__, status);
-
 	if (status) {
 		/* error stop all */
 		return;
@@ -1015,8 +979,6 @@ static void iuu_close(struct usb_serial_port *port)
 	if (!serial)
 		return;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	iuu_uart_off(port);
 	if (serial->dev) {
 		/* free writebuf */
@@ -1031,7 +993,6 @@ static void iuu_close(struct usb_serial_port *port)
 
 static void iuu_init_termios(struct tty_struct *tty)
 {
-	dbg("%s - enter", __func__);
 	*(tty->termios) = tty_std_termios;
 	tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
 				| TIOCM_CTS | CSTOPB | PARENB;
@@ -1188,8 +1149,6 @@ static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc)
 	if (!buf)
 		return -ENOMEM;
 
-	dbg("%s - enter", __func__);
-
 	buf[0] = IUU_SET_VCC;
 	buf[1] = vcc & 0xFF;
 	buf[2] = (vcc >> 8) & 0xFF;
@@ -1250,15 +1209,11 @@ static DEVICE_ATTR(vcc_mode, S_IRUSR | S_IWUSR, show_vcc_mode,
 
 static int iuu_create_sysfs_attrs(struct usb_serial_port *port)
 {
-	dbg("%s", __func__);
-
 	return device_create_file(&port->dev, &dev_attr_vcc_mode);
 }
 
 static int iuu_remove_sysfs_attrs(struct usb_serial_port *port)
 {
-	dbg("%s", __func__);
-
 	device_remove_file(&port->dev, &dev_attr_vcc_mode);
 	return 0;
 }
@@ -1294,7 +1249,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&iuu_device, NULL
 };
 
-module_usb_serial_driver(iuu_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR("Alain Degreffe eczema@ecze.com");
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index a39ddd1b0dca..a1b99243dac9 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -130,15 +130,13 @@ struct keyspan_port_private {
 #include "keyspan_usa67msg.h"
 
 
-module_usb_serial_driver(keyspan_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, keyspan_ids_combined);
 
 static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_port_private 	*p_priv;
 
-	dbg("%s", __func__);
-
 	p_priv = usb_get_serial_port_data(port);
 
 	if (break_state == -1)
@@ -158,8 +156,6 @@ static void keyspan_set_termios(struct tty_struct *tty,
 	const struct keyspan_device_details	*d_details;
 	unsigned int 			cflag;
 
-	dbg("%s", __func__);
-
 	p_priv = usb_get_serial_port_data(port);
 	d_details = p_priv->device_details;
 	cflag = tty->termios->c_cflag;
@@ -306,8 +302,6 @@ static void	usa26_indat_callback(struct urb *urb)
 	unsigned char 		*data = urb->transfer_buffer;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	endpoint = usb_pipeendpoint(urb->pipe);
 
 	if (status) {
@@ -369,8 +363,6 @@ static void	usa2x_outdat_callback(struct urb *urb)
 
 static void	usa26_inack_callback(struct urb *urb)
 {
-	dbg("%s", __func__);
-
 }
 
 static void	usa26_outcont_callback(struct urb *urb)
@@ -452,7 +444,6 @@ exit: ;
 
 static void	usa26_glocont_callback(struct urb *urb)
 {
-	dbg("%s", __func__);
 }
 
 
@@ -465,8 +456,6 @@ static void usa28_indat_callback(struct urb *urb)
 	struct keyspan_port_private             *p_priv;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	port =  urb->context;
 	p_priv = usb_get_serial_port_data(port);
 	data = urb->transfer_buffer;
@@ -505,7 +494,6 @@ static void usa28_indat_callback(struct urb *urb)
 
 static void	usa28_inack_callback(struct urb *urb)
 {
-	dbg("%s", __func__);
 }
 
 static void	usa28_outcont_callback(struct urb *urb)
@@ -585,7 +573,6 @@ exit: ;
 
 static void	usa28_glocont_callback(struct urb *urb)
 {
-	dbg("%s", __func__);
 }
 
 
@@ -596,8 +583,6 @@ static void	usa49_glocont_callback(struct urb *urb)
 	struct keyspan_port_private *p_priv;
 	int i;
 
-	dbg("%s", __func__);
-
 	serial =  urb->context;
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
@@ -625,8 +610,6 @@ static void	usa49_instat_callback(struct urb *urb)
 	int old_dcd_state;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	serial =  urb->context;
 
 	if (status) {
@@ -679,7 +662,6 @@ exit:	;
 
 static void	usa49_inack_callback(struct urb *urb)
 {
-	dbg("%s", __func__);
 }
 
 static void	usa49_indat_callback(struct urb *urb)
@@ -691,8 +673,6 @@ static void	usa49_indat_callback(struct urb *urb)
 	unsigned char 		*data = urb->transfer_buffer;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	endpoint = usb_pipeendpoint(urb->pipe);
 
 	if (status) {
@@ -742,8 +722,6 @@ static void usa49wg_indat_callback(struct urb *urb)
 	unsigned char 		*data = urb->transfer_buffer;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	serial = urb->context;
 
 	if (status) {
@@ -806,7 +784,6 @@ static void usa49wg_indat_callback(struct urb *urb)
 /* not used, usa-49 doesn't have per-port control endpoints */
 static void usa49_outcont_callback(struct urb *urb)
 {
-	dbg("%s", __func__);
 }
 
 static void usa90_indat_callback(struct urb *urb)
@@ -819,8 +796,6 @@ static void usa90_indat_callback(struct urb *urb)
 	unsigned char 		*data = urb->transfer_buffer;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	endpoint = usb_pipeendpoint(urb->pipe);
 
 	if (status) {
@@ -957,8 +932,6 @@ static void	usa67_instat_callback(struct urb *urb)
 	int old_dcd_state;
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	serial = urb->context;
 
 	if (status) {
@@ -1010,8 +983,6 @@ static void usa67_glocont_callback(struct urb *urb)
 	struct keyspan_port_private *p_priv;
 	int i;
 
-	dbg("%s", __func__);
-
 	serial = urb->context;
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
@@ -1035,7 +1006,6 @@ static int keyspan_write_room(struct tty_struct *tty)
 	int				data_len;
 	struct urb			*this_urb;
 
-	dbg("%s", __func__);
 	p_priv = usb_get_serial_port_data(port);
 	d_details = p_priv->device_details;
 
@@ -1078,8 +1048,6 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
 	p_priv = usb_get_serial_port_data(port);
 	d_details = p_priv->device_details;
 
-	dbg("%s - port%d.", __func__, port->number);
-
 	/* Set some sane defaults */
 	p_priv->rts_state = 1;
 	p_priv->dtr_state = 1;
@@ -1165,7 +1133,6 @@ static void keyspan_close(struct usb_serial_port *port)
 	struct keyspan_serial_private 	*s_priv;
 	struct keyspan_port_private 	*p_priv;
 
-	dbg("%s", __func__);
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
 
@@ -1438,8 +1405,6 @@ static void keyspan_setup_urbs(struct usb_serial *serial)
 	struct callbacks		*cback;
 	int				endp;
 
-	dbg("%s", __func__);
-
 	s_priv = usb_get_serial_data(serial);
 	d_details = s_priv->device_details;
 
@@ -1853,8 +1818,6 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
 	struct urb				*this_urb;
 	int 					device_port, err;
 
-	dbg("%s", __func__);
-
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
 	d_details = s_priv->device_details;
@@ -1980,8 +1943,6 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 	struct urb				*this_urb;
 	int 					err, device_port;
 
-	dbg("%s", __func__);
-
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
 	d_details = s_priv->device_details;
@@ -2168,8 +2129,6 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 	int 					err;
 	u8						prescaler;
 
-	dbg("%s", __func__);
-
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
 	d_details = s_priv->device_details;
@@ -2300,8 +2259,6 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
 	struct urb				*this_urb;
 	int 					err, device_port;
 
-	dbg("%s", __func__);
-
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
 	d_details = s_priv->device_details;
@@ -2442,8 +2399,6 @@ static void keyspan_send_setup(struct usb_serial_port *port, int reset_port)
 	struct keyspan_serial_private *s_priv;
 	const struct keyspan_device_details *d_details;
 
-	dbg("%s", __func__);
-
 	s_priv = usb_get_serial_data(serial);
 	d_details = s_priv->device_details;
 
@@ -2477,8 +2432,6 @@ static int keyspan_startup(struct usb_serial *serial)
 	struct keyspan_port_private	*p_priv;
 	const struct keyspan_device_details	*d_details;
 
-	dbg("%s", __func__);
-
 	for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
 		if (d_details->product_id ==
 				le16_to_cpu(serial->dev->descriptor.idProduct))
@@ -2538,8 +2491,6 @@ static void keyspan_disconnect(struct usb_serial *serial)
 	struct keyspan_serial_private 	*s_priv;
 	struct keyspan_port_private	*p_priv;
 
-	dbg("%s", __func__);
-
 	s_priv = usb_get_serial_data(serial);
 
 	/* Stop reading/writing urbs */
@@ -2579,8 +2530,6 @@ static void keyspan_release(struct usb_serial *serial)
 	struct usb_serial_port		*port;
 	struct keyspan_serial_private 	*s_priv;
 
-	dbg("%s", __func__);
-
 	s_priv = usb_get_serial_data(serial);
 
 	/*  dbg("Freeing serial->private."); */
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 622853c9e384..fe1c5d91692c 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -487,13 +487,6 @@ static const struct usb_device_id keyspan_ids_combined[] = {
 
 MODULE_DEVICE_TABLE(usb, keyspan_ids_combined);
 
-static struct usb_driver keyspan_driver = {
-	.name =		"keyspan",                
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	keyspan_ids_combined,
-};
-
 /* usb_device_id table for the pre-firmware download keyspan devices */
 static const struct usb_device_id keyspan_pre_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 693bcdfcb3d5..a4ac3cfeffc4 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -86,13 +86,6 @@ static const struct usb_device_id id_table_combined[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table_combined);
 
-static struct usb_driver keyspan_pda_driver = {
-	.name =		"keyspan_pda",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-};
-
 static const struct usb_device_id id_table_std[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
 	{ }						/* Terminating entry */
@@ -131,7 +124,6 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
 	struct usb_serial *serial = priv->serial;
 	int result;
 
-	dbg(" request_unthrottle");
 	/* ask the device to tell us when the tx buffer becomes
 	   sufficiently empty */
 	result = usb_control_msg(serial->dev,
@@ -226,7 +218,7 @@ static void keyspan_pda_rx_throttle(struct tty_struct *tty)
 	   send an XOFF, although it might make sense to foist that off
 	   upon the device too. */
 	struct usb_serial_port *port = tty->driver_data;
-	dbg("keyspan_pda_rx_throttle port %d", port->number);
+
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
@@ -235,7 +227,7 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	/* just restart the receive interrupt URB */
-	dbg("keyspan_pda_rx_unthrottle port %d", port->number);
+
 	if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
 		dbg(" usb_submit_urb(read urb) failed");
 }
@@ -466,7 +458,6 @@ static int keyspan_pda_write(struct tty_struct *tty,
 	   select() or poll() too) until we receive that unthrottle interrupt.
 	   Block if we can't write anything at all, otherwise write as much as
 	   we can. */
-	dbg("keyspan_pda_write(%d)", count);
 	if (count == 0) {
 		dbg(" write request of 0 bytes");
 		return 0;
@@ -766,8 +757,6 @@ static int keyspan_pda_startup(struct usb_serial *serial)
 
 static void keyspan_pda_release(struct usb_serial *serial)
 {
-	dbg("%s", __func__);
-
 	kfree(usb_get_serial_port_data(serial->port[0]));
 }
 
@@ -834,7 +823,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	NULL
 };
 
-module_usb_serial_driver(keyspan_pda_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 10f05407e535..5bed59cd5776 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -86,13 +86,6 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver kl5kusb105d_driver = {
-	.name =		"kl5kusb105d",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver kl5kusb105d_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -282,8 +275,6 @@ static void klsi_105_release(struct usb_serial *serial)
 {
 	int i;
 
-	dbg("%s", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i)
 		kfree(usb_get_serial_port_data(serial->port[i]));
 }
@@ -298,8 +289,6 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct klsi_105_port_settings *cfg;
 	unsigned long flags;
 
-	dbg("%s port %d", __func__, port->number);
-
 	/* Do a defined restart:
 	 * Set up sane default baud rate and send the 'READ_ON'
 	 * vendor command.
@@ -376,8 +365,6 @@ static void klsi_105_close(struct usb_serial_port *port)
 {
 	int rc;
 
-	dbg("%s port %d", __func__, port->number);
-
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected) {
 		/* send READ_OFF */
@@ -646,7 +633,6 @@ static int klsi_105_tiocmget(struct tty_struct *tty)
 	unsigned long flags;
 	int rc;
 	unsigned long line_state;
-	dbg("%s - request, just guessing", __func__);
 
 	rc = klsi_105_get_line_state(port, &line_state);
 	if (rc < 0) {
@@ -668,8 +654,6 @@ static int klsi_105_tiocmset(struct tty_struct *tty,
 {
 	int retval = -EINVAL;
 
-	dbg("%s", __func__);
-
 /* if this ever gets implemented, it should be done something like this:
 	struct usb_serial *serial = port->serial;
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
@@ -692,7 +676,7 @@ static int klsi_105_tiocmset(struct tty_struct *tty,
 	return retval;
 }
 
-module_usb_serial_driver(kl5kusb105d_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 4a9a75eb9b95..fafeabb64c55 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -81,18 +81,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_KAAN_SIM_PRODUCT_ID) },
 	{ }			/* Terminating entry */
 };
-
-
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver kobil_driver = {
-	.name =		"kobil",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
-
 static struct usb_serial_driver kobil_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -193,7 +183,6 @@ static int kobil_startup(struct usb_serial *serial)
 static void kobil_release(struct usb_serial *serial)
 {
 	int i;
-	dbg("%s - port %d", __func__, serial->port[0]->number);
 
 	for (i = 0; i < serial->num_ports; ++i)
 		kfree(usb_get_serial_port_data(serial->port[i]));
@@ -217,7 +206,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 	int transfer_buffer_length = 8;
 	int write_urb_transfer_buffer_length = 8;
 
-	dbg("%s - port %d", __func__, port->number);
 	priv = usb_get_serial_port_data(port);
 
 	/* allocate memory for transfer buffer */
@@ -327,8 +315,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void kobil_close(struct usb_serial_port *port)
 {
-	dbg("%s - port %d", __func__, port->number);
-
 	/* FIXME: Add rts/dtr methods */
 	if (port->write_urb) {
 		usb_poison_urb(port->write_urb);
@@ -349,8 +335,6 @@ static void kobil_read_int_callback(struct urb *urb)
 	int status = urb->status;
 /*	char *dbg_data; */
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (status) {
 		dbg("%s - port %d Read int status not zero: %d",
 		    __func__, port->number, status);
@@ -474,7 +458,6 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 static int kobil_write_room(struct tty_struct *tty)
 {
-	/* dbg("%s - port %d", __func__, port->number); */
 	/* FIXME */
 	return 8;
 }
@@ -683,7 +666,7 @@ static int kobil_ioctl(struct tty_struct *tty,
 	}
 }
 
-module_usb_serial_driver(kobil_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 6edd26130e25..d0ec1aa52719 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -73,22 +73,14 @@ static void mct_u232_unthrottle(struct tty_struct *tty);
 /*
  * All of the device info needed for the MCT USB-RS232 converter.
  */
-static const struct usb_device_id id_table_combined[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
 	{ USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
 	{ USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
 	{ USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) },
 	{ }		/* Terminating entry */
 };
-
-MODULE_DEVICE_TABLE(usb, id_table_combined);
-
-static struct usb_driver mct_u232_driver = {
-	.name =		"mct_u232",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-};
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_serial_driver mct_u232_device = {
 	.driver = {
@@ -96,7 +88,7 @@ static struct usb_serial_driver mct_u232_device = {
 		.name =		"mct_u232",
 	},
 	.description =	     "MCT U232",
-	.id_table =	     id_table_combined,
+	.id_table =	     id_table,
 	.num_ports =	     1,
 	.open =		     mct_u232_open,
 	.close =	     mct_u232_close,
@@ -427,8 +419,6 @@ static void mct_u232_release(struct usb_serial *serial)
 	struct mct_u232_private *priv;
 	int i;
 
-	dbg("%s", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i) {
 		/* My special items, the standard routines free my urbs */
 		priv = usb_get_serial_port_data(serial->port[i]);
@@ -446,8 +436,6 @@ static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
 	unsigned char last_lcr;
 	unsigned char last_msr;
 
-	dbg("%s port %d", __func__, port->number);
-
 	/* Compensate for a hardware bug: although the Sitecom U232-P25
 	 * device reports a maximum output packet size of 32 bytes,
 	 * it seems to be able to accept only 16 bytes (and that's what
@@ -528,8 +516,6 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
 
 static void mct_u232_close(struct usb_serial_port *port)
 {
-	dbg("%s port %d", __func__, port->number);
-
 	if (port->serial->dev) {
 		/* shutdown our urbs */
 		usb_kill_urb(port->write_urb);
@@ -572,7 +558,6 @@ static void mct_u232_read_int_callback(struct urb *urb)
 		return;
 	}
 
-	dbg("%s - port %d", __func__, port->number);
 	usb_serial_debug_data(debug, &port->dev, __func__,
 					urb->actual_length, data);
 
@@ -733,8 +718,6 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
 	unsigned char lcr;
 	unsigned long flags;
 
-	dbg("%sstate=%d", __func__, break_state);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	lcr = priv->last_lcr;
 
@@ -753,8 +736,6 @@ static int mct_u232_tiocmget(struct tty_struct *tty)
 	unsigned int control_state;
 	unsigned long flags;
 
-	dbg("%s", __func__);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	control_state = priv->control_state;
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -771,8 +752,6 @@ static int mct_u232_tiocmset(struct tty_struct *tty,
 	unsigned int control_state;
 	unsigned long flags;
 
-	dbg("%s", __func__);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	control_state = priv->control_state;
 
@@ -796,8 +775,6 @@ static void mct_u232_throttle(struct tty_struct *tty)
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned int control_state;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irq(&priv->lock);
 	priv->rx_flags |= THROTTLED;
 	if (C_CRTSCTS(tty)) {
@@ -816,8 +793,6 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned int control_state;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irq(&priv->lock);
 	if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) {
 		priv->rx_flags &= ~THROTTLED;
@@ -906,7 +881,7 @@ static int  mct_u232_get_icount(struct tty_struct *tty,
 	return 0;
 }
 
-module_usb_serial_driver(mct_u232_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 08d16e8c002d..81423f7361db 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -17,7 +17,6 @@
 #include <linux/tty_flip.h>
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
-#include <linux/errno.h>
 #include <linux/uaccess.h>
 #include <linux/usb/serial.h>
 
@@ -56,6 +55,47 @@ MODULE_DEVICE_TABLE(usb, id_table);
 /* Input parameter constants. */
 static bool debug;
 
+/* UNI-Directional mode commands for device configure */
+#define UNI_CMD_OPEN	0x80
+#define UNI_CMD_CLOSE	0xFF
+
+inline int metrousb_is_unidirectional_mode(struct usb_serial_port *port)
+{
+	__u16 product_id = le16_to_cpu(
+		port->serial->dev->descriptor.idProduct);
+
+	return product_id == FOCUS_PRODUCT_ID_UNI;
+}
+
+static int metrousb_send_unidirectional_cmd(u8 cmd, struct usb_serial_port *port)
+{
+	int ret;
+	int actual_len;
+	u8 *buffer_cmd = NULL;
+
+	if (!metrousb_is_unidirectional_mode(port))
+		return 0;
+
+	buffer_cmd = kzalloc(sizeof(cmd), GFP_KERNEL);
+	if (!buffer_cmd)
+		return -ENOMEM;
+
+	*buffer_cmd = cmd;
+
+	ret = usb_interrupt_msg(port->serial->dev,
+		usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
+		buffer_cmd, sizeof(cmd),
+		&actual_len, USB_CTRL_SET_TIMEOUT);
+
+	kfree(buffer_cmd);
+
+	if (ret < 0)
+		return ret;
+	else if (actual_len != sizeof(cmd))
+		return -EIO;
+	return 0;
+}
+
 static void metrousb_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
@@ -78,12 +118,12 @@ static void metrousb_read_int_callback(struct urb *urb)
 		/* urb has been terminated. */
 		dev_dbg(&port->dev,
 			"%s - urb shutting down, error code=%d\n",
-			__func__, result);
+			__func__, urb->status);
 		return;
 	default:
 		dev_dbg(&port->dev,
 			"%s - non-zero urb received, error code=%d\n",
-			__func__, result);
+			__func__, urb->status);
 		goto exit;
 	}
 
@@ -91,7 +131,7 @@ static void metrousb_read_int_callback(struct urb *urb)
 	/* Set the data read from the usb port into the serial port buffer. */
 	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
-		dev_dbg(&port->dev, "%s - bad tty pointer - exiting\n",
+		dev_err(&port->dev, "%s - bad tty pointer - exiting\n",
 			__func__);
 		return;
 	}
@@ -121,7 +161,7 @@ static void metrousb_read_int_callback(struct urb *urb)
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 
 		if (result)
-			dev_dbg(&port->dev,
+			dev_err(&port->dev,
 				"%s - failed submitting interrupt in urb, error code=%d\n",
 				__func__, result);
 	}
@@ -131,11 +171,19 @@ exit:
 	/* Try to resubmit the urb. */
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result)
-		dev_dbg(&port->dev,
+		dev_err(&port->dev,
 			"%s - failed submitting interrupt in urb, error code=%d\n",
 			__func__, result);
 }
 
+static void metrousb_write_int_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+
+	dev_warn(&port->dev, "%s not implemented yet.\n",
+		__func__);
+}
+
 static void metrousb_cleanup(struct usb_serial_port *port)
 {
 	dev_dbg(&port->dev, "%s\n", __func__);
@@ -146,6 +194,9 @@ static void metrousb_cleanup(struct usb_serial_port *port)
 			usb_unlink_urb(port->interrupt_in_urb);
 			usb_kill_urb(port->interrupt_in_urb);
 		}
+
+		/* Send deactivate cmd to device */
+		metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
 	}
 }
 
@@ -160,7 +211,7 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/* Make sure the urb is initialized. */
 	if (!port->interrupt_in_urb) {
-		dev_dbg(&port->dev, "%s - interrupt urb not initialized\n",
+		dev_err(&port->dev, "%s - interrupt urb not initialized\n",
 			__func__);
 		return -ENODEV;
 	}
@@ -191,12 +242,21 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 
 	if (result) {
-		dev_dbg(&port->dev,
+		dev_err(&port->dev,
 			"%s - failed submitting interrupt in urb, error code=%d\n",
 			__func__, result);
 		goto exit;
 	}
 
+	/* Send activate cmd to device */
+	result = metrousb_send_unidirectional_cmd(UNI_CMD_OPEN, port);
+	if (result) {
+		dev_err(&port->dev,
+			"%s - failed to configure device for port number=%d, error code=%d\n",
+			__func__, port->number, result);
+		goto exit;
+	}
+
 	dev_dbg(&port->dev, "%s - port open\n", __func__);
 exit:
 	return result;
@@ -221,7 +281,7 @@ static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int contr
 				METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST,
 				control_state, 0, NULL, 0, WDR_TIMEOUT);
 	if (retval < 0)
-		dev_dbg(&serial->dev->dev,
+		dev_err(&serial->dev->dev,
 			"%s - set modem ctrl=0x%x failed, error code=%d\n",
 			__func__, mcr, retval);
 
@@ -354,29 +414,23 @@ static void metrousb_unthrottle(struct tty_struct *tty)
 	port->interrupt_in_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 	if (result)
-		dev_dbg(tty->dev,
+		dev_err(tty->dev,
 			"failed submitting interrupt in urb error code=%d\n",
 			result);
 }
 
-static struct usb_driver metrousb_driver = {
-	.name =		"metro-usb",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table
-};
-
 static struct usb_serial_driver metrousb_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
 		.name =		"metro-usb",
 	},
-	.description		= "Metrologic USB to serial converter.",
+	.description		= "Metrologic USB to Serial",
 	.id_table		= id_table,
 	.num_ports		= 1,
 	.open			= metrousb_open,
 	.close			= metrousb_cleanup,
 	.read_int_callback	= metrousb_read_int_callback,
+	.write_int_callback	= metrousb_write_int_callback,
 	.attach			= metrousb_startup,
 	.release		= metrousb_shutdown,
 	.throttle		= metrousb_throttle,
@@ -390,7 +444,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	NULL,
 };
 
-module_usb_serial_driver(metrousb_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Philip Nicastro");
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index bdce82034122..a07dd3c8cfef 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -79,12 +79,12 @@ static struct usb_serial_driver moschip7720_2port_driver;
 #define MOSCHIP_DEVICE_ID_7720		0x7720
 #define MOSCHIP_DEVICE_ID_7715		0x7715
 
-static const struct usb_device_id moschip_port_id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
 	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) },
 	{ } /* terminating entry */
 };
-MODULE_DEVICE_TABLE(usb, moschip_port_id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
 
@@ -257,7 +257,6 @@ static void destroy_mos_parport(struct kref *kref)
 	struct mos7715_parport *mos_parport =
 		container_of(kref, struct mos7715_parport, ref_count);
 
-	dbg("%s called", __func__);
 	kfree(mos_parport);
 }
 
@@ -266,7 +265,7 @@ static void destroy_urbtracker(struct kref *kref)
 	struct urbtracker *urbtrack =
 		container_of(kref, struct urbtracker, ref_count);
 	struct mos7715_parport *mos_parport = urbtrack->mos_parport;
-	dbg("%s called", __func__);
+
 	usb_free_urb(urbtrack->urb);
 	kfree(urbtrack);
 	kref_put(&mos_parport->ref_count, destroy_mos_parport);
@@ -285,8 +284,6 @@ static void send_deferred_urbs(unsigned long _mos_parport)
 	struct urbtracker *urbtrack;
 	struct list_head *cursor, *next;
 
-	dbg("%s called", __func__);
-
 	/* if release function ran, game over */
 	if (unlikely(mos_parport->serial == NULL))
 		return;
@@ -335,7 +332,7 @@ static void async_complete(struct urb *urb)
 {
 	struct urbtracker *urbtrack = urb->context;
 	int status = urb->status;
-	dbg("%s called", __func__);
+
 	if (unlikely(status))
 		dbg("%s - nonzero urb status received: %d", __func__, status);
 
@@ -355,7 +352,6 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
 	struct usb_ctrlrequest setup;
 	struct usb_serial *serial = mos_parport->serial;
 	struct usb_device *usbdev = serial->dev;
-	dbg("%s called", __func__);
 
 	/* create and initialize the control urb and containing urbtracker */
 	urbtrack = kmalloc(sizeof(struct urbtracker), GFP_ATOMIC);
@@ -476,7 +472,7 @@ static inline void parport_epilogue(struct parport *pp)
 static void parport_mos7715_write_data(struct parport *pp, unsigned char d)
 {
 	struct mos7715_parport *mos_parport = pp->private_data;
-	dbg("%s called: %2.2x", __func__, d);
+
 	if (parport_prologue(pp) < 0)
 		return;
 	mos7715_change_mode(mos_parport, SPP);
@@ -488,7 +484,7 @@ static unsigned char parport_mos7715_read_data(struct parport *pp)
 {
 	struct mos7715_parport *mos_parport = pp->private_data;
 	unsigned char d;
-	dbg("%s called", __func__);
+
 	if (parport_prologue(pp) < 0)
 		return 0;
 	read_mos_reg(mos_parport->serial, dummy, DPR, &d);
@@ -500,7 +496,7 @@ static void parport_mos7715_write_control(struct parport *pp, unsigned char d)
 {
 	struct mos7715_parport *mos_parport = pp->private_data;
 	__u8 data;
-	dbg("%s called: %2.2x", __func__, d);
+
 	if (parport_prologue(pp) < 0)
 		return;
 	data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0);
@@ -513,7 +509,7 @@ static unsigned char parport_mos7715_read_control(struct parport *pp)
 {
 	struct mos7715_parport *mos_parport = pp->private_data;
 	__u8 dcr;
-	dbg("%s called", __func__);
+
 	spin_lock(&release_lock);
 	mos_parport = pp->private_data;
 	if (unlikely(mos_parport == NULL)) {
@@ -531,7 +527,7 @@ static unsigned char parport_mos7715_frob_control(struct parport *pp,
 {
 	struct mos7715_parport *mos_parport = pp->private_data;
 	__u8 dcr;
-	dbg("%s called", __func__);
+
 	mask &= 0x0f;
 	val &= 0x0f;
 	if (parport_prologue(pp) < 0)
@@ -547,7 +543,7 @@ static unsigned char parport_mos7715_read_status(struct parport *pp)
 {
 	unsigned char status;
 	struct mos7715_parport *mos_parport = pp->private_data;
-	dbg("%s called", __func__);
+
 	spin_lock(&release_lock);
 	mos_parport = pp->private_data;
 	if (unlikely(mos_parport == NULL)) {	/* release called */
@@ -561,17 +557,16 @@ static unsigned char parport_mos7715_read_status(struct parport *pp)
 
 static void parport_mos7715_enable_irq(struct parport *pp)
 {
-	dbg("%s called", __func__);
 }
+
 static void parport_mos7715_disable_irq(struct parport *pp)
 {
-	dbg("%s called", __func__);
 }
 
 static void parport_mos7715_data_forward(struct parport *pp)
 {
 	struct mos7715_parport *mos_parport = pp->private_data;
-	dbg("%s called", __func__);
+
 	if (parport_prologue(pp) < 0)
 		return;
 	mos7715_change_mode(mos_parport, PS2);
@@ -583,7 +578,7 @@ static void parport_mos7715_data_forward(struct parport *pp)
 static void parport_mos7715_data_reverse(struct parport *pp)
 {
 	struct mos7715_parport *mos_parport = pp->private_data;
-	dbg("%s called", __func__);
+
 	if (parport_prologue(pp) < 0)
 		return;
 	mos7715_change_mode(mos_parport, PS2);
@@ -595,7 +590,6 @@ static void parport_mos7715_data_reverse(struct parport *pp)
 static void parport_mos7715_init_state(struct pardevice *dev,
 				       struct parport_state *s)
 {
-	dbg("%s called", __func__);
 	s->u.pc.ctr = DCR_INIT_VAL;
 	s->u.pc.ecr = ECR_INIT_VAL;
 }
@@ -605,7 +599,7 @@ static void parport_mos7715_save_state(struct parport *pp,
 				       struct parport_state *s)
 {
 	struct mos7715_parport *mos_parport;
-	dbg("%s called", __func__);
+
 	spin_lock(&release_lock);
 	mos_parport = pp->private_data;
 	if (unlikely(mos_parport == NULL)) {	/* release called */
@@ -622,7 +616,7 @@ static void parport_mos7715_restore_state(struct parport *pp,
 					  struct parport_state *s)
 {
 	struct mos7715_parport *mos_parport;
-	dbg("%s called", __func__);
+
 	spin_lock(&release_lock);
 	mos_parport = pp->private_data;
 	if (unlikely(mos_parport == NULL)) {	/* release called */
@@ -641,7 +635,7 @@ static size_t parport_mos7715_write_compat(struct parport *pp,
 	int retval;
 	struct mos7715_parport *mos_parport = pp->private_data;
 	int actual_len;
-	dbg("%s called: %u chars", __func__, (unsigned int)len);
+
 	if (parport_prologue(pp) < 0)
 		return 0;
 	mos7715_change_mode(mos_parport, PPF);
@@ -2164,20 +2158,13 @@ static void mos7720_release(struct usb_serial *serial)
 		kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
-static struct usb_driver usb_driver = {
-	.name =		"moschip7720",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	moschip_port_id_table,
-};
-
 static struct usb_serial_driver moschip7720_2port_driver = {
 	.driver = {
 		.owner =	THIS_MODULE,
 		.name =		"moschip7720",
 	},
 	.description		= "Moschip 2 port adapter",
-	.id_table		= moschip_port_id_table,
+	.id_table		= id_table,
 	.calc_num_ports		= mos77xx_calc_num_ports,
 	.open			= mos7720_open,
 	.close			= mos7720_close,
@@ -2203,7 +2190,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&moschip7720_2port_driver, NULL
 };
 
-module_usb_serial_driver(usb_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c526550694a0..29160f8b5101 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -114,10 +114,10 @@
 #define USB_VENDOR_ID_MOSCHIP           0x9710
 #define MOSCHIP_DEVICE_ID_7840          0x7840
 #define MOSCHIP_DEVICE_ID_7820          0x7820
+#define MOSCHIP_DEVICE_ID_7810          0x7810
 /* The native component can have its vendor/device id's overridden
  * in vendor-specific implementations.  Such devices can be handled
- * by making a change here, in moschip_port_id_table, and in
- * moschip_id_table_combined
+ * by making a change here, in id_table.
  */
 #define USB_VENDOR_ID_BANDB              0x0856
 #define BANDB_DEVICE_ID_USO9ML2_2        0xAC22
@@ -184,31 +184,16 @@
 #define NUM_URBS                        16	/* URB Count */
 #define URB_TRANSFER_BUFFER_SIZE        32	/* URB Size  */
 
+/* LED on/off milliseconds*/
+#define LED_ON_MS	500
+#define LED_OFF_MS	500
 
-static const struct usb_device_id moschip_port_id_table[] = {
-	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
-	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
-	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
-	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
-	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
-	{}			/* terminating entry */
-};
+static int device_type;
 
-static const struct usb_device_id moschip_id_table_combined[] __devinitconst = {
+static const struct usb_device_id id_table[] __devinitconst = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
+	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)},
@@ -226,8 +211,7 @@ static const struct usb_device_id moschip_id_table_combined[] __devinitconst = {
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */
 };
-
-MODULE_DEVICE_TABLE(usb, moschip_id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 /* This structure holds all of the local port information */
 
@@ -261,8 +245,13 @@ struct moschip_port {
 	struct urb *write_urb_pool[NUM_URBS];
 	char busy[NUM_URBS];
 	bool read_urb_busy;
-};
 
+	/* For device(s) with LED indicator */
+	bool has_led;
+	bool led_flag;
+	struct timer_list led_timer1;	/* Timer for LED on */
+	struct timer_list led_timer2;	/* Timer for LED off */
+};
 
 static bool debug;
 
@@ -572,6 +561,69 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
 	return ret;
 }
 
+static void mos7840_set_led_callback(struct urb *urb)
+{
+	switch (urb->status) {
+	case 0:
+		/* Success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* This urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __func__,
+			urb->status);
+		break;
+	default:
+		dbg("%s - nonzero urb status received: %d", __func__,
+			urb->status);
+	}
+}
+
+static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval,
+				__u16 reg)
+{
+	struct usb_device *dev = mcs->port->serial->dev;
+	struct usb_ctrlrequest *dr = mcs->dr;
+
+	dr->bRequestType = MCS_WR_RTYPE;
+	dr->bRequest = MCS_WRREQ;
+	dr->wValue = cpu_to_le16(wval);
+	dr->wIndex = cpu_to_le16(reg);
+	dr->wLength = cpu_to_le16(0);
+
+	usb_fill_control_urb(mcs->control_urb, dev, usb_sndctrlpipe(dev, 0),
+		(unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL);
+
+	usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
+}
+
+static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg,
+				__u16 val)
+{
+	struct usb_device *dev = port->serial->dev;
+
+	usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE,
+			val, reg, NULL, 0, MOS_WDR_TIMEOUT);
+}
+
+static void mos7840_led_off(unsigned long arg)
+{
+	struct moschip_port *mcs = (struct moschip_port *) arg;
+
+	/* Turn off LED */
+	mos7840_set_led_async(mcs, 0x0300, MODEM_CONTROL_REGISTER);
+	mod_timer(&mcs->led_timer2,
+				jiffies + msecs_to_jiffies(LED_OFF_MS));
+}
+
+static void mos7840_led_flag_off(unsigned long arg)
+{
+	struct moschip_port *mcs = (struct moschip_port *) arg;
+
+	mcs->led_flag = false;
+}
+
 /*****************************************************************************
  * mos7840_interrupt_callback
  *	this is the callback function for when we have received data on the
@@ -591,8 +643,6 @@ static void mos7840_interrupt_callback(struct urb *urb)
 	__u16 wval, wreg = 0;
 	int status = urb->status;
 
-	dbg("%s", " : Entering");
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -766,12 +816,8 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 		return;
 	}
 
-	dbg("%s", "Entering... ");
-
 	data = urb->transfer_buffer;
 
-	dbg("%s", "Entering ...........");
-
 	if (urb->actual_length) {
 		tty = tty_port_tty_get(&mos7840_port->port->port);
 		if (tty) {
@@ -792,6 +838,14 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 		return;
 	}
 
+	/* Turn on LED */
+	if (mos7840_port->has_led && !mos7840_port->led_flag) {
+		mos7840_port->led_flag = true;
+		mos7840_set_led_async(mos7840_port, 0x0301,
+					MODEM_CONTROL_REGISTER);
+		mod_timer(&mos7840_port->led_timer1,
+				jiffies + msecs_to_jiffies(LED_ON_MS));
+	}
 
 	mos7840_port->read_urb_busy = true;
 	retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
@@ -835,8 +889,6 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
 		return;
 	}
 
-	dbg("%s", "Entering .........");
-
 	tty = tty_port_tty_get(&mos7840_port->port->port);
 	if (tty && mos7840_port->open)
 		tty_wakeup(tty);
@@ -878,8 +930,6 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct moschip_port *mos7840_port;
 	struct moschip_port *port0;
 
-	dbg ("%s enter", __func__);
-
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Port Paranoia failed");
 		return -ENODEV;
@@ -1151,10 +1201,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	dbg("usb_serial serial:%p       mos7840_port:%p\n      usb_serial_port port:%p",
 				serial, mos7840_port, port);
 
-	dbg ("%s leave", __func__);
-
 	return 0;
-
 }
 
 /*****************************************************************************
@@ -1175,18 +1222,14 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
 	unsigned long flags;
 	struct moschip_port *mos7840_port;
 
-	dbg("%s", " mos7840_chars_in_buffer:entering ...........");
-
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port");
 		return 0;
 	}
 
 	mos7840_port = mos7840_get_port_private(port);
-	if (mos7840_port == NULL) {
-		dbg("%s", "mos7840_break:leaving ...........");
+	if (mos7840_port == NULL)
 		return 0;
-	}
 
 	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
 	for (i = 0; i < NUM_URBS; ++i)
@@ -1211,8 +1254,6 @@ static void mos7840_close(struct usb_serial_port *port)
 	int j;
 	__u16 Data;
 
-	dbg("%s", "mos7840_close:entering...");
-
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Port Paranoia failed");
 		return;
@@ -1287,8 +1328,6 @@ static void mos7840_close(struct usb_serial_port *port)
 	mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 
 	mos7840_port->open = 0;
-
-	dbg("%s", "Leaving ............");
 }
 
 /************************************************************************
@@ -1343,9 +1382,6 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
 
-	dbg("%s", "Entering ...........");
-	dbg("mos7840_break: Start");
-
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Port Paranoia failed");
 		return;
@@ -1395,8 +1431,6 @@ static int mos7840_write_room(struct tty_struct *tty)
 	unsigned long flags;
 	struct moschip_port *mos7840_port;
 
-	dbg("%s", " mos7840_write_room:entering ...........");
-
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port");
 		dbg("%s", " mos7840_write_room:leaving ...........");
@@ -1445,9 +1479,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* __u16 Data; */
 	const unsigned char *current_position = data;
 	unsigned char *data1;
-	dbg("%s", "entering ...........");
-	/* dbg("mos7840_write: mos7840_port->shadowLCR is %x",
-					mos7840_port->shadowLCR); */
 
 #ifdef NOTMOS7840
 	Data = 0x00;
@@ -1554,6 +1585,14 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	data1 = urb->transfer_buffer;
 	dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
 
+	/* Turn on LED */
+	if (mos7840_port->has_led && !mos7840_port->led_flag) {
+		mos7840_port->led_flag = true;
+		mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0301);
+		mod_timer(&mos7840_port->led_timer1,
+				jiffies + msecs_to_jiffies(LED_ON_MS));
+	}
+
 	/* send it down the pipe */
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 
@@ -1602,8 +1641,6 @@ static void mos7840_throttle(struct tty_struct *tty)
 		return;
 	}
 
-	dbg("%s", "Entering ..........");
-
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
 		unsigned char stop_char = STOP_CHAR(tty);
@@ -1646,8 +1683,6 @@ static void mos7840_unthrottle(struct tty_struct *tty)
 		return;
 	}
 
-	dbg("%s", "Entering ..........");
-
 	/* if we are implementing XON/XOFF, send the start character */
 	if (I_IXOFF(tty)) {
 		unsigned char start_char = START_CHAR(tty);
@@ -1676,8 +1711,6 @@ static int mos7840_tiocmget(struct tty_struct *tty)
 	int status;
 	mos7840_port = mos7840_get_port_private(port);
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (mos7840_port == NULL)
 		return -ENODEV;
 
@@ -1704,8 +1737,6 @@ static int mos7840_tiocmset(struct tty_struct *tty,
 	unsigned int mcr;
 	int status;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	mos7840_port = mos7840_get_port_private(port);
 
 	if (mos7840_port == NULL)
@@ -1746,7 +1777,6 @@ static int mos7840_tiocmset(struct tty_struct *tty,
 static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
 					  __u16 *clk_sel_val)
 {
-
 	dbg("%s - %d", __func__, baudRate);
 
 	if (baudRate <= 115200) {
@@ -1839,8 +1869,6 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 		return -1;
 	}
 
-	dbg("%s", "Entering ..........");
-
 	number = mos7840_port->port->number - mos7840_port->port->serial->minor;
 
 	dbg("%s - port = %d, baud = %d", __func__,
@@ -1966,8 +1994,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 		return;
 	}
 
-	dbg("%s", "Entering ..........");
-
 	lData = LCR_BITS_8;
 	lStop = LCR_STOP_1;
 	lParity = LCR_PAR_NONE;
@@ -2108,7 +2134,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
 	unsigned int cflag;
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
-	dbg("mos7840_set_termios: START");
+
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port");
 		return;
@@ -2327,28 +2353,74 @@ static int mos7840_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
+static int mos7810_check(struct usb_serial *serial)
+{
+	int i, pass_count = 0;
+	__u16 data = 0, mcr_data = 0;
+	__u16 test_pattern = 0x55AA;
+
+	/* Store MCR setting */
+	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+		MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
+		&mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+
+	for (i = 0; i < 16; i++) {
+		/* Send the 1-bit test pattern out to MCS7810 test pin */
+		usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			MCS_WRREQ, MCS_WR_RTYPE,
+			(0x0300 | (((test_pattern >> i) & 0x0001) << 1)),
+			MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
+
+		/* Read the test pattern back */
+		usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
+			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+
+		/* If this is a MCS7810 device, both test patterns must match */
+		if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
+			break;
+
+		pass_count++;
+	}
+
+	/* Restore MCR setting */
+	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCS_WRREQ,
+		MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
+		0, MOS_WDR_TIMEOUT);
+
+	if (pass_count == 16)
+		return 1;
+
+	return 0;
+}
+
 static int mos7840_calc_num_ports(struct usb_serial *serial)
 {
-	__u16 Data = 0x00;
-	int ret = 0;
+	__u16 data = 0x00;
 	int mos7840_num_ports;
 
-	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-		MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &Data,
+	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+		MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
 		VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
 
-	if ((Data & 0x01) == 0) {
-		mos7840_num_ports = 2;
-		serial->num_bulk_in = 2;
-		serial->num_bulk_out = 2;
-		serial->num_ports = 2;
+	if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
+		serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
+		device_type = serial->dev->descriptor.idProduct;
 	} else {
-		mos7840_num_ports = 4;
-		serial->num_bulk_in = 4;
-		serial->num_bulk_out = 4;
-		serial->num_ports = 4;
+		/* For a MCS7840 device GPIO0 must be set to 1 */
+		if ((data & 0x01) == 1)
+			device_type = MOSCHIP_DEVICE_ID_7840;
+		else if (mos7810_check(serial))
+			device_type = MOSCHIP_DEVICE_ID_7810;
+		else
+			device_type = MOSCHIP_DEVICE_ID_7820;
 	}
 
+	mos7840_num_ports = (device_type >> 4) & 0x000F;
+	serial->num_bulk_in = mos7840_num_ports;
+	serial->num_bulk_out = mos7840_num_ports;
+	serial->num_ports = mos7840_num_ports;
+
 	return mos7840_num_ports;
 }
 
@@ -2361,9 +2433,7 @@ static int mos7840_startup(struct usb_serial *serial)
 	struct moschip_port *mos7840_port;
 	struct usb_device *dev;
 	int i, status;
-
 	__u16 Data;
-	dbg("%s", "mos7840_startup :Entering..........");
 
 	if (!serial) {
 		dbg("%s", "Invalid Handler");
@@ -2372,9 +2442,6 @@ static int mos7840_startup(struct usb_serial *serial)
 
 	dev = serial->dev;
 
-	dbg("%s", "Entering...");
-	dbg ("mos7840_startup: serial = %p", serial);
-
 	/* we set up the pointers to the endpoints in the mos7840_open *
 	 * function, as the structures aren't created yet.             */
 
@@ -2563,6 +2630,34 @@ static int mos7840_startup(struct usb_serial *serial)
 			status = -ENOMEM;
 			goto error;
 		}
+
+		mos7840_port->has_led = false;
+
+		/* Initialize LED timers */
+		if (device_type == MOSCHIP_DEVICE_ID_7810) {
+			mos7840_port->has_led = true;
+
+			init_timer(&mos7840_port->led_timer1);
+			mos7840_port->led_timer1.function = mos7840_led_off;
+			mos7840_port->led_timer1.expires =
+					jiffies + msecs_to_jiffies(LED_ON_MS);
+			mos7840_port->led_timer1.data =
+						(unsigned long)mos7840_port;
+
+			init_timer(&mos7840_port->led_timer2);
+			mos7840_port->led_timer2.function =
+						mos7840_led_flag_off;
+			mos7840_port->led_timer2.expires =
+					jiffies + msecs_to_jiffies(LED_OFF_MS);
+			mos7840_port->led_timer2.data =
+						(unsigned long)mos7840_port;
+
+			mos7840_port->led_flag = false;
+
+			/* Turn off LED */
+			mos7840_set_led_sync(serial->port[i],
+						MODEM_CONTROL_REGISTER, 0x0300);
+		}
 	}
 	dbg ("mos7840_startup: all ports configured...........");
 
@@ -2602,7 +2697,6 @@ static void mos7840_disconnect(struct usb_serial *serial)
 	int i;
 	unsigned long flags;
 	struct moschip_port *mos7840_port;
-	dbg("%s", " disconnect :entering..........");
 
 	if (!serial) {
 		dbg("%s", "Invalid Handler");
@@ -2624,9 +2718,6 @@ static void mos7840_disconnect(struct usb_serial *serial)
 			usb_kill_urb(mos7840_port->control_urb);
 		}
 	}
-
-	dbg("%s", "Thank u :: ");
-
 }
 
 /****************************************************************************
@@ -2638,7 +2729,6 @@ static void mos7840_release(struct usb_serial *serial)
 {
 	int i;
 	struct moschip_port *mos7840_port;
-	dbg("%s", " release :entering..........");
 
 	if (!serial) {
 		dbg("%s", "Invalid Handler");
@@ -2654,30 +2744,28 @@ static void mos7840_release(struct usb_serial *serial)
 		mos7840_port = mos7840_get_port_private(serial->port[i]);
 		dbg("mos7840_port %d = %p", i, mos7840_port);
 		if (mos7840_port) {
+			if (mos7840_port->has_led) {
+				/* Turn off LED */
+				mos7840_set_led_sync(mos7840_port->port,
+						MODEM_CONTROL_REGISTER, 0x0300);
+
+				del_timer_sync(&mos7840_port->led_timer1);
+				del_timer_sync(&mos7840_port->led_timer2);
+			}
 			kfree(mos7840_port->ctrl_buf);
 			kfree(mos7840_port->dr);
 			kfree(mos7840_port);
 		}
 	}
-
-	dbg("%s", "Thank u :: ");
-
 }
 
-static struct usb_driver io_driver = {
-	.name = "mos7840",
-	.probe = usb_serial_probe,
-	.disconnect = usb_serial_disconnect,
-	.id_table = moschip_id_table_combined,
-};
-
 static struct usb_serial_driver moschip7840_4port_device = {
 	.driver = {
 		   .owner = THIS_MODULE,
 		   .name = "mos7840",
 		   },
 	.description = DRIVER_DESC,
-	.id_table = moschip_port_id_table,
+	.id_table = id_table,
 	.num_ports = 4,
 	.open = mos7840_open,
 	.close = mos7840_close,
@@ -2707,7 +2795,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&moschip7840_4port_device, NULL
 };
 
-module_usb_serial_driver(io_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index 3ab6214b4bbf..c5ff6c7795a6 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -31,13 +31,6 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver moto_driver = {
-	.name =		"moto-modem",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver moto_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -51,5 +44,5 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&moto_device, NULL
 };
 
-module_usb_serial_driver(moto_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 29ab6eb5b536..d95452cc076d 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -30,13 +30,6 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver navman_driver = {
-	.name =		"navman",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static void navman_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
@@ -53,12 +46,12 @@ static void navman_read_int_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
 		goto exit;
 	}
 
@@ -84,10 +77,9 @@ static int navman_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (port->interrupt_in_urb) {
-		dbg("%s - adding interrupt input for treo", __func__);
+		dev_dbg(&port->dev, "%s - adding interrupt input for treo\n",
+			__func__);
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (result)
 			dev_err(&port->dev,
@@ -99,16 +91,12 @@ static int navman_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void navman_close(struct usb_serial_port *port)
 {
-	dbg("%s - port %d", __func__, port->number);
-
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
 static int navman_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
-	dbg("%s - port %d", __func__, port->number);
-
 	/*
 	 * This device can't write any data, only read from the device
 	 */
@@ -132,7 +120,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&navman_device, NULL
 };
 
-module_usb_serial_driver(navman_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 88dc785bb298..6f3d7051c7f4 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -54,17 +54,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
 	{ }						/* Terminating entry */
 };
-
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver omninet_driver = {
-	.name =		"omninet",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
-
 static struct usb_serial_driver zyxel_omninet_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -144,8 +135,6 @@ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct usb_serial_port	*wport;
 	int			result = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	wport = serial->port[1];
 	tty_port_tty_set(&wport->port, tty);
 
@@ -160,7 +149,6 @@ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void omninet_close(struct usb_serial_port *port)
 {
-	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
 }
 
@@ -178,8 +166,6 @@ static void omninet_read_bulk_callback(struct urb *urb)
 	int result;
 	int i;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (status) {
 		dbg("%s - nonzero read bulk status received: %d",
 		    __func__, status);
@@ -225,8 +211,6 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	int			result;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (count == 0) {
 		dbg("%s - write request of 0 bytes", __func__);
 		return 0;
@@ -289,8 +273,6 @@ static void omninet_write_bulk_callback(struct urb *urb)
 	struct usb_serial_port 	*port   =  urb->context;
 	int status = urb->status;
 
-	dbg("%s - port %0x", __func__, port->number);
-
 	set_bit(0, &port->write_urbs_free);
 	if (status) {
 		dbg("%s - nonzero write bulk status received: %d",
@@ -306,8 +288,6 @@ static void omninet_disconnect(struct usb_serial *serial)
 {
 	struct usb_serial_port *wport = serial->port[1];
 
-	dbg("%s", __func__);
-
 	usb_kill_urb(wport->write_urb);
 }
 
@@ -316,12 +296,10 @@ static void omninet_release(struct usb_serial *serial)
 {
 	struct usb_serial_port *port = serial->port[0];
 
-	dbg("%s", __func__);
-
 	kfree(usb_get_serial_port_data(port));
 }
 
-module_usb_serial_driver(omninet_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 82cc9d202b83..02cb1b7f6559 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -70,8 +70,6 @@ static void opticon_read_bulk_callback(struct urb *urb)
 	int data_length;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -179,8 +177,6 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 	unsigned long flags;
 	int result = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->throttled = false;
 	priv->actually_throttled = false;
@@ -216,8 +212,6 @@ static void opticon_close(struct usb_serial_port *port)
 {
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 
-	dbg("%s - port %d", __func__, port->number);
-
 	/* shutdown our urbs */
 	usb_kill_urb(priv->bulk_read_urb);
 }
@@ -256,8 +250,6 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 	int status;
 	struct usb_ctrlrequest *dr;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -338,8 +330,6 @@ static int opticon_write_room(struct tty_struct *tty)
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	/*
 	 * We really can take almost anything the user throws at us
 	 * but let's pick a nice big number to tell the tty
@@ -362,7 +352,6 @@ static void opticon_throttle(struct tty_struct *tty)
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->throttled = true;
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -376,8 +365,6 @@ static void opticon_unthrottle(struct tty_struct *tty)
 	unsigned long flags;
 	int result, was_throttled;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->throttled = false;
 	was_throttled = priv->actually_throttled;
@@ -400,10 +387,6 @@ static int opticon_tiocmget(struct tty_struct *tty)
 	unsigned long flags;
 	int result = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-	if (!usb_get_intfdata(port->serial->interface))
-		return -ENODEV;
-
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->rts)
 		result |= TIOCM_RTS;
@@ -419,13 +402,13 @@ static int opticon_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;
 	bool rts;
 	bool changed = false;
+	int ret;
 
-	if (!usb_get_intfdata(port->serial->interface))
-		return -ENODEV;
 	/* We only support RTS so we only handle that */
 	spin_lock_irqsave(&priv->lock, flags);
 
@@ -441,7 +424,14 @@ static int opticon_tiocmset(struct tty_struct *tty,
 		return 0;
 
 	/* Send the new RTS state to the connected device */
-	return send_control_msg(port, CONTROL_RTS, !rts);
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected)
+		ret = send_control_msg(port, CONTROL_RTS, !rts);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&serial->disc_mutex);
+
+	return ret;
 }
 
 static int get_serial_info(struct opticon_private *priv,
@@ -555,8 +545,6 @@ static void opticon_disconnect(struct usb_serial *serial)
 {
 	struct opticon_private *priv = usb_get_serial_data(serial);
 
-	dbg("%s", __func__);
-
 	usb_kill_urb(priv->bulk_read_urb);
 	usb_free_urb(priv->bulk_read_urb);
 }
@@ -565,24 +553,20 @@ static void opticon_release(struct usb_serial *serial)
 {
 	struct opticon_private *priv = usb_get_serial_data(serial);
 
-	dbg("%s", __func__);
-
 	kfree(priv->bulk_in_buffer);
 	kfree(priv);
 }
 
-static int opticon_suspend(struct usb_interface *intf, pm_message_t message)
+static int opticon_suspend(struct usb_serial *serial, pm_message_t message)
 {
-	struct usb_serial *serial = usb_get_intfdata(intf);
 	struct opticon_private *priv = usb_get_serial_data(serial);
 
 	usb_kill_urb(priv->bulk_read_urb);
 	return 0;
 }
 
-static int opticon_resume(struct usb_interface *intf)
+static int opticon_resume(struct usb_serial *serial)
 {
-	struct usb_serial *serial = usb_get_intfdata(intf);
 	struct opticon_private *priv = usb_get_serial_data(serial);
 	struct usb_serial_port *port = serial->port[0];
 	int result;
@@ -597,15 +581,6 @@ static int opticon_resume(struct usb_interface *intf)
 	return result;
 }
 
-static struct usb_driver opticon_driver = {
-	.name =		"opticon",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.suspend =	opticon_suspend,
-	.resume =	opticon_resume,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver opticon_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -625,13 +600,15 @@ static struct usb_serial_driver opticon_device = {
 	.ioctl =		opticon_ioctl,
 	.tiocmget =		opticon_tiocmget,
 	.tiocmset =		opticon_tiocmset,
+	.suspend = 		opticon_suspend,
+	.resume =		opticon_resume,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
 	&opticon_device, NULL
 };
 
-module_usb_serial_driver(opticon_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f4465ccddc35..1aae9028cd0b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1220,18 +1220,6 @@ static const struct usb_device_id option_ids[] = {
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
 
-static struct usb_driver option_driver = {
-	.name       = "option",
-	.probe      = usb_serial_probe,
-	.disconnect = usb_serial_disconnect,
-#ifdef CONFIG_PM
-	.suspend    = usb_serial_suspend,
-	.resume     = usb_serial_resume,
-	.supports_autosuspend =	1,
-#endif
-	.id_table   = option_ids,
-};
-
 /* The card has three separate interfaces, which the serial driver
  * recognizes separately, thus num_port=1.
  */
@@ -1300,7 +1288,7 @@ struct option_port_private {
 	unsigned long tx_start_time[N_OUT_URB];
 };
 
-module_usb_serial_driver(option_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, option_ids);
 
 static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
 			   const struct option_blacklist_info *blacklist)
@@ -1375,7 +1363,6 @@ static void option_instat_callback(struct urb *urb)
 	struct usb_serial_port *port =  urb->context;
 	struct option_port_private *portdata = usb_get_serial_port_data(port);
 
-	dbg("%s", __func__);
 	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
 
 	if (status == 0) {
@@ -1413,7 +1400,7 @@ static void option_instat_callback(struct urb *urb)
 				req_pkt->bRequestType, req_pkt->bRequest);
 		}
 	} else
-		err("%s: error %d", __func__, status);
+		dev_err(&port->dev, "%s: error %d\n", __func__, status);
 
 	/* Resubmit urb so we continue receiving IRQ data */
 	if (status != -ESHUTDOWN && status != -ENOENT) {
@@ -1437,7 +1424,6 @@ static int option_send_setup(struct usb_serial_port *port)
 	struct option_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	int val = 0;
-	dbg("%s", __func__);
 
 	if (is_blacklisted(ifNum, OPTION_BLACKLIST_SENDSETUP,
 			(struct option_blacklist_info *) intfdata->private)) {
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 5fdc33c6a3c0..5976b65ab6ee 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -66,13 +66,6 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver oti6858_driver = {
-	.name =		"oti6858",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static bool debug;
 
 /* requests */
@@ -211,8 +204,6 @@ static void setup_line(struct work_struct *work)
 	unsigned long flags;
 	int result;
 
-	dbg("%s(port = %d)", __func__, port->number);
-
 	new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
 	if (new_setup == NULL) {
 		dev_err(&port->dev, "%s(): out of memory!\n", __func__);
@@ -282,8 +273,6 @@ static void send_data(struct work_struct *work)
 	unsigned long flags;
 	u8 *allow;
 
-	dbg("%s(port = %d)", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->flags.write_urb_in_use) {
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -379,8 +368,6 @@ static int oti6858_startup(struct usb_serial *serial)
 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
-	dbg("%s(port = %d, count = %d)", __func__, port->number, count);
-
 	if (!count)
 		return count;
 
@@ -395,8 +382,6 @@ static int oti6858_write_room(struct tty_struct *tty)
 	int room = 0;
 	unsigned long flags;
 
-	dbg("%s(port = %d)", __func__, port->number);
-
 	spin_lock_irqsave(&port->lock, flags);
 	room = kfifo_avail(&port->write_fifo);
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -410,8 +395,6 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty)
 	int chars = 0;
 	unsigned long flags;
 
-	dbg("%s(port = %d)", __func__, port->number);
-
 	spin_lock_irqsave(&port->lock, flags);
 	chars = kfifo_len(&port->write_fifo);
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -437,8 +420,6 @@ static void oti6858_set_termios(struct tty_struct *tty,
 	__le16 divisor;
 	int br;
 
-	dbg("%s(port = %d)", __func__, port->number);
-
 	if (!tty) {
 		dbg("%s(): no tty structures", __func__);
 		return;
@@ -545,8 +526,6 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 	unsigned long flags;
 	int result;
 
-	dbg("%s(port = %d)", __func__, port->number);
-
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
@@ -602,8 +581,6 @@ static void oti6858_close(struct usb_serial_port *port)
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
-	dbg("%s(port = %d)", __func__, port->number);
-
 	spin_lock_irqsave(&port->lock, flags);
 	/* clear out any remaining data in the buffer */
 	kfifo_reset_out(&port->write_fifo);
@@ -633,9 +610,6 @@ static int oti6858_tiocmset(struct tty_struct *tty,
 	dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)",
 				__func__, port->number, set, clear);
 
-	if (!usb_get_intfdata(port->serial->interface))
-		return -ENODEV;
-
 	/* FIXME: check if this is correct (active high/low) */
 	spin_lock_irqsave(&priv->lock, flags);
 	control = priv->pending_setup.control;
@@ -663,11 +637,6 @@ static int oti6858_tiocmget(struct tty_struct *tty)
 	unsigned pin_state;
 	unsigned result = 0;
 
-	dbg("%s(port = %d)", __func__, port->number);
-
-	if (!usb_get_intfdata(port->serial->interface))
-		return -ENODEV;
-
 	spin_lock_irqsave(&priv->lock, flags);
 	pin_state = priv->status.pin_state & PIN_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -750,8 +719,6 @@ static void oti6858_release(struct usb_serial *serial)
 {
 	int i;
 
-	dbg("%s()", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i)
 		kfree(usb_get_serial_port_data(serial->port[i]));
 }
@@ -763,9 +730,6 @@ static void oti6858_read_int_callback(struct urb *urb)
 	int transient = 0, can_recv = 0, resubmit = 1;
 	int status = urb->status;
 
-	dbg("%s(port = %d, status = %d)",
-				__func__, port->number, status);
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -882,9 +846,6 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 	int status = urb->status;
 	int result;
 
-	dbg("%s(port = %d, status = %d)",
-				__func__, port->number, status);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->flags.read_urb_in_use = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -916,9 +877,6 @@ static void oti6858_write_bulk_callback(struct urb *urb)
 	int status = urb->status;
 	int result;
 
-	dbg("%s(port = %d, status = %d)",
-				__func__, port->number, status);
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -958,7 +916,7 @@ static void oti6858_write_bulk_callback(struct urb *urb)
 	}
 }
 
-module_usb_serial_driver(oti6858_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
 MODULE_AUTHOR(OTI6858_AUTHOR);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index a1a9062954c4..13b8dd6481f5 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -38,8 +38,6 @@
 
 static bool debug;
 
-#define PL2303_CLOSING_WAIT	(30*HZ)
-
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
@@ -97,16 +95,6 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver pl2303_driver = {
-	.name =		"pl2303",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-	.suspend =      usb_serial_suspend,
-	.resume =       usb_serial_resume,
-	.supports_autosuspend =	1,
-};
-
 #define SET_LINE_REQUEST_TYPE		0x21
 #define SET_LINE_REQUEST		0x20
 
@@ -161,8 +149,9 @@ static int pl2303_vendor_read(__u16 value, __u16 index,
 	int res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
 			value, index, buf, 1, 100);
-	dbg("0x%x:0x%x:0x%x:0x%x  %d - %x", VENDOR_READ_REQUEST_TYPE,
-			VENDOR_READ_REQUEST, value, index, res, buf[0]);
+	dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x  %d - %x\n",
+		VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, value, index,
+		res, buf[0]);
 	return res;
 }
 
@@ -172,8 +161,9 @@ static int pl2303_vendor_write(__u16 value, __u16 index,
 	int res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
 			value, index, NULL, 0, 100);
-	dbg("0x%x:0x%x:0x%x:0x%x  %d", VENDOR_WRITE_REQUEST_TYPE,
-			VENDOR_WRITE_REQUEST, value, index, res);
+	dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x  %d\n",
+		VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, value, index,
+		res);
 	return res;
 }
 
@@ -196,7 +186,7 @@ static int pl2303_startup(struct usb_serial *serial)
 		type = type_1;
 	else if (serial->dev->descriptor.bDeviceClass == 0xFF)
 		type = type_1;
-	dbg("device type: %d", type);
+	dev_dbg(&serial->interface->dev, "device type: %d\n", type);
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL);
@@ -243,7 +233,8 @@ static int set_control_lines(struct usb_device *dev, u8 value)
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				 SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
 				 value, 0, NULL, 0, 100);
-	dbg("%s - value = %d, retval = %d", __func__, value, retval);
+	dev_dbg(&dev->dev, "%s - value = %d, retval = %d\n", __func__,
+		value, retval);
 	return retval;
 }
 
@@ -265,8 +256,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	int baud_floor, baud_ceil;
 	int k;
 
-	dbg("%s -  port %d", __func__, port->number);
-
 	/* The PL2303 is reported to lose bytes if you change
 	   serial settings even to the same values as before. Thus
 	   we actually need to filter in this specific case */
@@ -287,7 +276,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			    GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
 			    0, 0, buf, 7, 100);
-	dbg("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
+	dev_dbg(&port->dev, "0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x\n", i,
 	    buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
 	if (cflag & CSIZE) {
@@ -306,7 +295,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 			buf[6] = 8;
 			break;
 		}
-		dbg("%s - data bits = %d", __func__, buf[6]);
+		dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
 	}
 
 	/* For reference buf[0]:buf[3] baud rate value */
@@ -315,7 +304,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	 *          9600 baud (at least my PL2303X always does)
 	 */
 	baud = tty_get_baud_rate(tty);
-	dbg("%s - baud requested = %d", __func__, baud);
+	dev_dbg(&port->dev, "baud requested = %d\n", baud);
 	if (baud) {
 		/* Set baudrate to nearest supported value */
 		for (k=0; k<ARRAY_SIZE(baud_sup); k++) {
@@ -341,7 +330,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 			else if (baud > 6000000)
 				baud = 6000000;
 		}
-		dbg("%s - baud set = %d", __func__, baud);
+		dev_dbg(&port->dev, "baud set = %d\n", baud);
 		if (baud <= 115200) {
 			buf[0] = baud & 0xff;
 			buf[1] = (baud >> 8) & 0xff;
@@ -372,14 +361,14 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		 */
 		if ((cflag & CSIZE) == CS5) {
 			buf[4] = 1;
-			dbg("%s - stop bits = 1.5", __func__);
+			dev_dbg(&port->dev, "stop bits = 1.5\n");
 		} else {
 			buf[4] = 2;
-			dbg("%s - stop bits = 2", __func__);
+			dev_dbg(&port->dev, "stop bits = 2\n");
 		}
 	} else {
 		buf[4] = 0;
-		dbg("%s - stop bits = 1", __func__);
+		dev_dbg(&port->dev, "stop bits = 1\n");
 	}
 
 	if (cflag & PARENB) {
@@ -391,29 +380,29 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		if (cflag & PARODD) {
 			if (cflag & CMSPAR) {
 				buf[5] = 3;
-				dbg("%s - parity = mark", __func__);
+				dev_dbg(&port->dev, "parity = mark\n");
 			} else {
 				buf[5] = 1;
-				dbg("%s - parity = odd", __func__);
+				dev_dbg(&port->dev, "parity = odd\n");
 			}
 		} else {
 			if (cflag & CMSPAR) {
 				buf[5] = 4;
-				dbg("%s - parity = space", __func__);
+				dev_dbg(&port->dev, "parity = space\n");
 			} else {
 				buf[5] = 2;
-				dbg("%s - parity = even", __func__);
+				dev_dbg(&port->dev, "parity = even\n");
 			}
 		}
 	} else {
 		buf[5] = 0;
-		dbg("%s - parity = none", __func__);
+		dev_dbg(&port->dev, "parity = none\n");
 	}
 
 	i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			    SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
 			    0, 0, buf, 7, 100);
-	dbg("0x21:0x20:0:0  %d", i);
+	dev_dbg(&port->dev, "0x21:0x20:0:0  %d\n", i);
 
 	/* change control lines if we are switching to or from B0 */
 	spin_lock_irqsave(&priv->lock, flags);
@@ -435,7 +424,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			    GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
 			    0, 0, buf, 7, 100);
-	dbg("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
+	dev_dbg(&port->dev, "0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x\n", i,
 	     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
 	if (cflag & CRTSCTS) {
@@ -473,8 +462,6 @@ static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
 
 static void pl2303_close(struct usb_serial_port *port)
 {
-	dbg("%s - port %d", __func__, port->number);
-
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 }
@@ -486,8 +473,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	int result;
 
-	dbg("%s -  port %d", __func__, port->number);
-
 	if (priv->type != HX) {
 		usb_clear_halt(serial->dev, port->write_urb->pipe);
 		usb_clear_halt(serial->dev, port->read_urb->pipe);
@@ -501,7 +486,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (tty)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
-	dbg("%s - submitting interrupt urb", __func__);
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
@@ -523,12 +507,11 @@ static int pl2303_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;
-
-	if (!usb_get_intfdata(port->serial->interface))
-		return -ENODEV;
+	int ret;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (set & TIOCM_RTS)
@@ -542,7 +525,14 @@ static int pl2303_tiocmset(struct tty_struct *tty,
 	control = priv->line_control;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return set_control_lines(port->serial->dev, control);
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected)
+		ret = set_control_lines(serial->dev, control);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&serial->disc_mutex);
+
+	return ret;
 }
 
 static int pl2303_tiocmget(struct tty_struct *tty)
@@ -554,11 +544,6 @@ static int pl2303_tiocmget(struct tty_struct *tty)
 	unsigned int status;
 	unsigned int result;
 
-	dbg("%s (%d)", __func__, port->number);
-
-	if (!usb_get_intfdata(port->serial->interface))
-		return -ENODEV;
-
 	spin_lock_irqsave(&priv->lock, flags);
 	mcr = priv->line_control;
 	status = priv->line_status;
@@ -571,7 +556,7 @@ static int pl2303_tiocmget(struct tty_struct *tty)
 		  | ((status & UART_RING)	? TIOCM_RI  : 0)
 		  | ((status & UART_DCD)	? TIOCM_CD  : 0);
 
-	dbg("%s - result = %x", __func__, result);
+	dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
 
 	return result;
 }
@@ -625,7 +610,8 @@ static int pl2303_ioctl(struct tty_struct *tty,
 {
 	struct serial_struct ser;
 	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+	dev_dbg(&port->dev, "%s cmd = 0x%04x\n", __func__, cmd);
 
 	switch (cmd) {
 	case TIOCGSERIAL:
@@ -641,10 +627,10 @@ static int pl2303_ioctl(struct tty_struct *tty,
 		return 0;
 
 	case TIOCMIWAIT:
-		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__);
 		return wait_modem_info(port, arg);
 	default:
-		dbg("%s not supported = 0x%04x", __func__, cmd);
+		dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd);
 		break;
 	}
 	return -ENOIOCTLCMD;
@@ -657,20 +643,18 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 	u16 state;
 	int result;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (break_state == 0)
 		state = BREAK_OFF;
 	else
 		state = BREAK_ON;
-	dbg("%s - turning break %s", __func__,
+	dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
 			state == BREAK_OFF ? "off" : "on");
 
 	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
 				 0, NULL, 0, 100);
 	if (result)
-		dbg("%s - error sending break = %d", __func__, result);
+		dev_err(&port->dev, "error sending break = %d\n", result);
 }
 
 static void pl2303_release(struct usb_serial *serial)
@@ -678,8 +662,6 @@ static void pl2303_release(struct usb_serial *serial)
 	int i;
 	struct pl2303_private *priv;
 
-	dbg("%s", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
 		kfree(priv);
@@ -742,8 +724,6 @@ static void pl2303_read_int_callback(struct urb *urb)
 	int status = urb->status;
 	int retval;
 
-	dbg("%s (%d)", __func__, port->number);
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -752,12 +732,12 @@ static void pl2303_read_int_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    status);
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    status);
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
 		goto exit;
 	}
 
@@ -769,7 +749,7 @@ static void pl2303_read_int_callback(struct urb *urb)
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		dev_err(&urb->dev->dev,
+		dev_err(&port->dev,
 			"%s - usb_submit_urb failed with result %d\n",
 			__func__, retval);
 }
@@ -807,7 +787,7 @@ static void pl2303_process_read_urb(struct urb *urb)
 		tty_flag = TTY_PARITY;
 	else if (line_status & UART_FRAME_ERROR)
 		tty_flag = TTY_FRAME;
-	dbg("%s - tty_flag = %d", __func__, tty_flag);
+	dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
 
 	/* overrun is special, not associated with a char */
 	if (line_status & UART_OVERRUN_ERROR)
@@ -855,7 +835,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&pl2303_device, NULL
 };
 
-module_usb_serial_driver(pl2303_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 966245680f55..a4edc7ee9c8a 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -77,13 +77,6 @@ static struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver qcaux_driver = {
-	.name =		"qcaux",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver qcaux_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -97,5 +90,5 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&qcaux_device, NULL
 };
 
-module_usb_serial_driver(qcaux_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 0206b10c9e6e..0d5fe59ebb9e 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -112,32 +112,22 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver qcdriver = {
-	.name			= "qcserial",
-	.probe			= usb_serial_probe,
-	.disconnect		= usb_serial_disconnect,
-	.id_table		= id_table,
-	.suspend		= usb_serial_suspend,
-	.resume			= usb_serial_resume,
-	.supports_autosuspend	= true,
-};
-
 static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 {
 	struct usb_wwan_intf_private *data;
 	struct usb_host_interface *intf = serial->interface->cur_altsetting;
+	struct device *dev = &serial->dev->dev;
 	int retval = -ENODEV;
 	__u8 nintf;
 	__u8 ifnum;
 	bool is_gobi1k = id->driver_info ? true : false;
 
-	dbg("%s", __func__);
-	dbg("Is Gobi 1000 = %d", is_gobi1k);
+	dev_dbg(dev, "Is Gobi 1000 = %d\n", is_gobi1k);
 
 	nintf = serial->dev->actconfig->desc.bNumInterfaces;
-	dbg("Num Interfaces = %d", nintf);
+	dev_dbg(dev, "Num Interfaces = %d\n", nintf);
 	ifnum = intf->desc.bInterfaceNumber;
-	dbg("This Interface = %d", ifnum);
+	dev_dbg(dev, "This Interface = %d\n", ifnum);
 
 	data = kzalloc(sizeof(struct usb_wwan_intf_private),
 					 GFP_KERNEL);
@@ -158,7 +148,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 		if (intf->desc.bNumEndpoints == 2 &&
 		    usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
 		    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
-			dbg("QDL port found");
+			dev_dbg(dev, "QDL port found\n");
 
 			if (serial->interface->num_altsetting == 1) {
 				retval = 0; /* Success */
@@ -167,7 +157,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
 			retval = usb_set_interface(serial->dev, ifnum, 1);
 			if (retval < 0) {
-				dev_err(&serial->dev->dev,
+				dev_err(dev,
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
@@ -196,20 +186,20 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 		 */
 
 		if (ifnum == 1 && !is_gobi1k) {
-			dbg("Gobi 2K+ DM/DIAG interface found");
+			dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
-				dev_err(&serial->dev->dev,
+				dev_err(dev,
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
 				kfree(data);
 			}
 		} else if (ifnum == 2) {
-			dbg("Modem port found");
+			dev_dbg(dev, "Modem port found\n");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
-				dev_err(&serial->dev->dev,
+				dev_err(dev,
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
@@ -221,10 +211,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 			 * # echo "\$GPS_START" > /dev/ttyUSBx
 			 * # echo "\$GPS_STOP"  > /dev/ttyUSBx
 			 */
-			dbg("Gobi 2K+ NMEA GPS interface found");
+			dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
 			retval = usb_set_interface(serial->dev, ifnum, 0);
 			if (retval < 0) {
-				dev_err(&serial->dev->dev,
+				dev_err(dev,
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
@@ -234,8 +224,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 		break;
 
 	default:
-		dev_err(&serial->dev->dev,
-			"unknown number of interfaces: %d\n", nintf);
+		dev_err(dev, "unknown number of interfaces: %d\n", nintf);
 		kfree(data);
 		retval = -ENODEV;
 	}
@@ -250,8 +239,6 @@ static void qc_release(struct usb_serial *serial)
 {
 	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
 
-	dbg("%s", __func__);
-
 	/* Call usb_wwan release & free the private data allocated in qcprobe */
 	usb_wwan_release(serial);
 	usb_set_serial_data(serial, NULL);
@@ -285,7 +272,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&qcdevice, NULL
 };
 
-module_usb_serial_driver(qcdriver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
new file mode 100644
index 000000000000..8dd88ebe9863
--- /dev/null
+++ b/drivers/usb/serial/quatech2.c
@@ -0,0 +1,1155 @@
+/*
+ * usb-serial driver for Quatech USB 2 devices
+ *
+ * Copyright (C) 2012 Bill Pemberton (wfp5p@virginia.edu)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ *
+ *  These devices all have only 1 bulk in and 1 bulk out that is shared
+ *  for all serial ports.
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/uaccess.h>
+
+static bool debug;
+
+/* default urb timeout for usb operations */
+#define QT2_USB_TIMEOUT USB_CTRL_SET_TIMEOUT
+
+#define QT_OPEN_CLOSE_CHANNEL       0xca
+#define QT_SET_GET_DEVICE           0xc2
+#define QT_SET_GET_REGISTER         0xc0
+#define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
+#define QT_SET_ATF                  0xcd
+#define QT_TRANSFER_IN              0xc0
+#define QT_HW_FLOW_CONTROL_MASK     0xc5
+#define QT_SW_FLOW_CONTROL_MASK     0xc6
+#define QT2_BREAK_CONTROL	    0xc8
+#define QT2_GET_SET_UART            0xc1
+#define QT2_FLUSH_DEVICE	    0xc4
+#define QT2_GET_SET_QMCR            0xe1
+#define QT2_QMCR_RS232              0x40
+#define QT2_QMCR_RS422              0x10
+
+#define  SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS)
+
+#define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
+
+/* status bytes for the device */
+#define QT2_CONTROL_BYTE    0x1b
+#define QT2_LINE_STATUS     0x00  /* following 1 byte is line status */
+#define QT2_MODEM_STATUS    0x01  /* following 1 byte is modem status */
+#define QT2_XMIT_HOLD       0x02  /* following 2 bytes are ?? */
+#define QT2_CHANGE_PORT     0x03  /* following 1 byte is port to change to */
+#define QT2_REC_FLUSH       0x04  /* no following info */
+#define QT2_XMIT_FLUSH      0x05  /* no following info */
+#define QT2_CONTROL_ESCAPE  0xff  /* pass through previous 2 control bytes */
+
+#define  MAX_BAUD_RATE              921600
+#define  DEFAULT_BAUD_RATE          9600
+
+#define QT2_WRITE_BUFFER_SIZE   512  /* size of write buffer */
+#define QT2_WRITE_CONTROL_SIZE  5    /* control bytes used for a write */
+
+/* Version Information */
+#define DRIVER_VERSION "v0.1"
+#define DRIVER_DESC "Quatech 2nd gen USB to Serial Driver"
+
+#define	USB_VENDOR_ID_QUATECH	0x061d
+#define QUATECH_SSU2_100	0xC120	/* RS232 single port */
+#define QUATECH_DSU2_100	0xC140	/* RS232 dual port */
+#define QUATECH_DSU2_400	0xC150	/* RS232/422/485 dual port */
+#define QUATECH_QSU2_100	0xC160	/* RS232 four port */
+#define QUATECH_QSU2_400	0xC170	/* RS232/422/485 four port */
+#define QUATECH_ESU2_100	0xC1A0	/* RS232 eight port */
+#define QUATECH_ESU2_400	0xC180	/* RS232/422/485 eight port */
+
+struct qt2_device_detail {
+	int product_id;
+	int num_ports;
+};
+
+#define QT_DETAILS(prod, ports)	\
+	.product_id = (prod),   \
+	.num_ports = (ports)
+
+static const struct qt2_device_detail qt2_device_details[] = {
+	{QT_DETAILS(QUATECH_SSU2_100, 1)},
+	{QT_DETAILS(QUATECH_DSU2_400, 2)},
+	{QT_DETAILS(QUATECH_DSU2_100, 2)},
+	{QT_DETAILS(QUATECH_QSU2_400, 4)},
+	{QT_DETAILS(QUATECH_QSU2_100, 4)},
+	{QT_DETAILS(QUATECH_ESU2_400, 8)},
+	{QT_DETAILS(QUATECH_ESU2_100, 8)},
+	{QT_DETAILS(0, 0)}	/* Terminating entry */
+};
+
+static const struct usb_device_id id_table[] = {
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_400)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_100)},
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_400)},
+	{}			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct qt2_serial_private {
+	unsigned char current_port;  /* current port for incoming data */
+
+	struct urb	*read_urb;   /* shared among all ports */
+	char		read_buffer[512];
+};
+
+struct qt2_port_private {
+	bool is_open;
+	u8   device_port;
+
+	spinlock_t urb_lock;
+	bool       urb_in_use;
+	struct urb *write_urb;
+	char       write_buffer[QT2_WRITE_BUFFER_SIZE];
+
+	spinlock_t  lock;
+	u8          shadowLSR;
+	u8          shadowMSR;
+
+	wait_queue_head_t   delta_msr_wait; /* Used for TIOCMIWAIT */
+	struct async_icount icount;
+
+	struct usb_serial_port *port;
+};
+
+static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch);
+static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch);
+static void qt2_write_bulk_callback(struct urb *urb);
+static void qt2_read_bulk_callback(struct urb *urb);
+
+static void qt2_release(struct usb_serial *serial)
+{
+	int i;
+
+	kfree(usb_get_serial_data(serial));
+
+	for (i = 0; i < serial->num_ports; i++)
+		kfree(usb_get_serial_port_data(serial->port[i]));
+}
+
+static inline int calc_baud_divisor(int baudrate)
+{
+	int divisor, rem;
+
+	divisor = MAX_BAUD_RATE / baudrate;
+	rem = MAX_BAUD_RATE % baudrate;
+	/* Round to nearest divisor */
+	if (((rem * 2) >= baudrate) && (baudrate != 110))
+		divisor++;
+
+	return divisor;
+}
+
+static inline int qt2_set_port_config(struct usb_device *dev,
+				      unsigned char port_number,
+				      u16 baudrate, u16 lcr)
+{
+	int divisor = calc_baud_divisor(baudrate);
+	u16 index = ((u16) (lcr << 8) | (u16) (port_number));
+
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       QT2_GET_SET_UART, 0x40,
+			       divisor, index, NULL, 0, QT2_USB_TIMEOUT);
+}
+
+static inline int qt2_control_msg(struct usb_device *dev,
+				  u8 request, u16 data, u16 index)
+{
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       request, 0x40, data, index,
+			       NULL, 0, QT2_USB_TIMEOUT);
+}
+
+static inline int qt2_setdevice(struct usb_device *dev, u8 *data)
+{
+	u16 x = ((u16) (data[1] << 8) | (u16) (data[0]));
+
+	return qt2_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
+}
+
+
+static inline int qt2_getdevice(struct usb_device *dev, u8 *data)
+{
+	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			       QT_SET_GET_DEVICE, 0xc0, 0, 0,
+			       data, 3, QT2_USB_TIMEOUT);
+}
+
+static inline int qt2_getregister(struct usb_device *dev,
+				  u8 uart,
+				  u8 reg,
+				  u8 *data)
+{
+	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			       QT_SET_GET_REGISTER, 0xc0, reg,
+			       uart, data, sizeof(*data), QT2_USB_TIMEOUT);
+
+}
+
+static inline int qt2_setregister(struct usb_device *dev,
+				  u8 uart, u8 reg, u16 data)
+{
+	u16 value = (data << 8) | reg;
+
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       QT_SET_GET_REGISTER, 0x40, value, uart,
+			       NULL, 0, QT2_USB_TIMEOUT);
+}
+
+static inline int update_mctrl(struct qt2_port_private *port_priv,
+			       unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = port_priv->port;
+	struct usb_device *dev = port->serial->dev;
+	unsigned urb_value;
+	int status;
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+		dev_dbg(&port->dev,
+			"update_mctrl - DTR|RTS not being set|cleared\n");
+		return 0;	/* no change */
+	}
+
+	clear &= ~set;	/* 'set' takes precedence over 'clear' */
+	urb_value = 0;
+	if (set & TIOCM_DTR)
+		urb_value |= UART_MCR_DTR;
+	if (set & TIOCM_RTS)
+		urb_value |= UART_MCR_RTS;
+
+	status = qt2_setregister(dev, port_priv->device_port, UART_MCR,
+				 urb_value);
+	if (status < 0)
+		dev_err(&port->dev,
+			"update_mctrl - Error from MODEM_CTRL urb: %i\n",
+			status);
+	return status;
+}
+
+static int qt2_calc_num_ports(struct usb_serial *serial)
+{
+	struct qt2_device_detail d;
+	int i;
+
+	for (i = 0; d = qt2_device_details[i], d.product_id != 0; i++) {
+		if (d.product_id == le16_to_cpu(serial->dev->descriptor.idProduct))
+			return d.num_ports;
+	}
+
+	/* we didn't recognize the device */
+	dev_err(&serial->dev->dev,
+		 "don't know the number of ports, assuming 1\n");
+
+	return 1;
+}
+
+static void qt2_set_termios(struct tty_struct *tty,
+			    struct usb_serial_port *port,
+			    struct ktermios *old_termios)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct qt2_port_private *port_priv;
+	struct ktermios *termios = tty->termios;
+	u16 baud;
+	unsigned int cflag = termios->c_cflag;
+	u16 new_lcr = 0;
+	int status;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	if (cflag & PARENB) {
+		if (cflag & PARODD)
+			new_lcr |= UART_LCR_PARITY;
+		else
+			new_lcr |= SERIAL_EVEN_PARITY;
+	}
+
+	switch (cflag & CSIZE) {
+	case CS5:
+		new_lcr |= UART_LCR_WLEN5;
+		break;
+	case CS6:
+		new_lcr |= UART_LCR_WLEN6;
+		break;
+	case CS7:
+		new_lcr |= UART_LCR_WLEN7;
+		break;
+	default:
+	case CS8:
+		new_lcr |= UART_LCR_WLEN8;
+		break;
+	}
+
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		baud = 9600;
+
+	status = qt2_set_port_config(dev, port_priv->device_port, baud,
+				     new_lcr);
+	if (status < 0)
+		dev_err(&port->dev, "%s - qt2_set_port_config failed: %i\n",
+			__func__, status);
+
+	if (cflag & CRTSCTS)
+		status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					 SERIAL_CRTSCTS,
+					 port_priv->device_port);
+	else
+		status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					 0, port_priv->device_port);
+	if (status < 0)
+		dev_err(&port->dev, "%s - set HW flow control failed: %i\n",
+			__func__, status);
+
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		u16 x = ((u16) (START_CHAR(tty) << 8) | (u16) (STOP_CHAR(tty)));
+
+		status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					 x, port_priv->device_port);
+	} else
+		status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					 0, port_priv->device_port);
+
+	if (status < 0)
+		dev_err(&port->dev, "%s - set SW flow control failed: %i\n",
+			__func__, status);
+
+}
+
+static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_serial *serial;
+	struct qt2_serial_private *serial_priv;
+	struct qt2_port_private *port_priv;
+	u8 *data;
+	u16 device_port;
+	int status;
+	unsigned long flags;
+
+	device_port = (u16) (port->number - port->serial->minor);
+
+	serial = port->serial;
+
+	port_priv = usb_get_serial_port_data(port);
+	serial_priv = usb_get_serial_data(serial);
+
+	/* set the port to RS232 mode */
+	status = qt2_control_msg(serial->dev, QT2_GET_SET_QMCR,
+				 QT2_QMCR_RS232, device_port);
+	if (status < 0) {
+		dev_err(&port->dev,
+			"%s failed to set RS232 mode for port %i error %i\n",
+			__func__, device_port, status);
+		return status;
+	}
+
+	data = kzalloc(2, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* open the port */
+	status = usb_control_msg(serial->dev,
+				 usb_rcvctrlpipe(serial->dev, 0),
+				 QT_OPEN_CLOSE_CHANNEL,
+				 0xc0, 0,
+				 device_port, data, 2, QT2_USB_TIMEOUT);
+
+	if (status < 0) {
+		dev_err(&port->dev, "%s - open port failed %i", __func__,
+			status);
+		kfree(data);
+		return status;
+	}
+
+	spin_lock_irqsave(&port_priv->lock, flags);
+	port_priv->shadowLSR = data[0];
+	port_priv->shadowMSR = data[1];
+	spin_unlock_irqrestore(&port_priv->lock, flags);
+
+	kfree(data);
+
+	/* set to default speed and 8bit word size */
+	status = qt2_set_port_config(serial->dev, device_port,
+				     DEFAULT_BAUD_RATE, UART_LCR_WLEN8);
+	if (status < 0) {
+		dev_err(&port->dev,
+			"%s - initial setup failed for port %i (%i)\n",
+			__func__, port->number, device_port);
+		return status;
+	}
+
+	port_priv->is_open = true;
+	port_priv->device_port = (u8) device_port;
+
+	if (tty)
+		qt2_set_termios(tty, port, tty->termios);
+
+	return 0;
+
+}
+
+static void qt2_close(struct usb_serial_port *port)
+{
+	struct usb_serial *serial;
+	struct qt2_serial_private *serial_priv;
+	struct qt2_port_private *port_priv;
+	unsigned long flags;
+	int i;
+
+	serial = port->serial;
+	serial_priv = usb_get_serial_data(serial);
+	port_priv = usb_get_serial_port_data(port);
+
+	port_priv->is_open = false;
+
+	spin_lock_irqsave(&port_priv->urb_lock, flags);
+	if (port_priv->write_urb->status == -EINPROGRESS)
+		usb_kill_urb(port_priv->write_urb);
+	port_priv->urb_in_use = false;
+	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
+
+	/* flush the port transmit buffer */
+	i = usb_control_msg(serial->dev,
+			    usb_rcvctrlpipe(serial->dev, 0),
+			    QT2_FLUSH_DEVICE, 0x40, 1,
+			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
+
+	if (i < 0)
+		dev_err(&port->dev, "%s - transmit buffer flush failed: %i\n",
+			__func__, i);
+
+	/* flush the port receive buffer */
+	i = usb_control_msg(serial->dev,
+			    usb_rcvctrlpipe(serial->dev, 0),
+			    QT2_FLUSH_DEVICE, 0x40, 0,
+			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
+
+	if (i < 0)
+		dev_err(&port->dev, "%s - receive buffer flush failed: %i\n",
+			__func__, i);
+
+	/* close the port */
+	i = usb_control_msg(serial->dev,
+			    usb_sndctrlpipe(serial->dev, 0),
+			    QT_OPEN_CLOSE_CHANNEL,
+			    0x40, 0,
+			    port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
+
+	if (i < 0)
+		dev_err(&port->dev, "%s - close port failed %i\n",
+			__func__, i);
+
+}
+
+static void qt2_disconnect(struct usb_serial *serial)
+{
+	struct qt2_serial_private *serial_priv = usb_get_serial_data(serial);
+	struct qt2_port_private *port_priv;
+	int i;
+
+	if (serial_priv->read_urb->status == -EINPROGRESS)
+		usb_kill_urb(serial_priv->read_urb);
+
+	usb_free_urb(serial_priv->read_urb);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port_priv = usb_get_serial_port_data(serial->port[i]);
+
+		if (port_priv->write_urb->status == -EINPROGRESS)
+			usb_kill_urb(port_priv->write_urb);
+		usb_free_urb(port_priv->write_urb);
+	}
+}
+
+static int get_serial_info(struct usb_serial_port *port,
+			   struct serial_struct __user *retinfo)
+{
+	struct serial_struct tmp;
+
+	if (!retinfo)
+		return -EFAULT;
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.line		= port->serial->minor;
+	tmp.port		= 0;
+	tmp.irq			= 0;
+	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+	tmp.xmit_fifo_size	= port->bulk_out_size;
+	tmp.baud_base		= 9600;
+	tmp.close_delay		= 5*HZ;
+	tmp.closing_wait	= 30*HZ;
+
+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
+{
+	struct qt2_port_private *priv = usb_get_serial_port_data(port);
+	struct async_icount prev, cur;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	prev = priv->icount;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	while (1) {
+		wait_event_interruptible(priv->delta_msr_wait,
+					 ((priv->icount.rng != prev.rng) ||
+					  (priv->icount.dsr != prev.dsr) ||
+					  (priv->icount.dcd != prev.dcd) ||
+					  (priv->icount.cts != prev.cts)));
+
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		cur = priv->icount;
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		if ((prev.rng == cur.rng) &&
+		    (prev.dsr == cur.dsr) &&
+		    (prev.dcd == cur.dcd) &&
+		    (prev.cts == cur.cts))
+			return -EIO;
+
+		if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) ||
+		    (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) ||
+		    (arg & TIOCM_CD && (prev.dcd != cur.dcd)) ||
+		    (arg & TIOCM_CTS && (prev.cts != cur.cts)))
+			return 0;
+	}
+	return 0;
+}
+
+static int qt2_get_icount(struct tty_struct *tty,
+			  struct serial_icounter_struct *icount)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct qt2_port_private *priv = usb_get_serial_port_data(port);
+	struct async_icount cnow = priv->icount;
+
+	icount->cts = cnow.cts;
+	icount->dsr = cnow.dsr;
+	icount->rng = cnow.rng;
+	icount->dcd = cnow.dcd;
+	icount->rx = cnow.rx;
+	icount->tx = cnow.tx;
+	icount->frame = cnow.frame;
+	icount->overrun = cnow.overrun;
+	icount->parity = cnow.parity;
+	icount->brk = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
+static int qt2_ioctl(struct tty_struct *tty,
+		     unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		return get_serial_info(port,
+				       (struct serial_struct __user *)arg);
+
+	case TIOCMIWAIT:
+		return wait_modem_info(port, arg);
+
+	default:
+		break;
+	}
+
+	return -ENOIOCTLCMD;
+}
+
+static void qt2_process_status(struct usb_serial_port *port, unsigned char *ch)
+{
+	switch (*ch) {
+	case QT2_LINE_STATUS:
+		qt2_update_lsr(port, ch + 1);
+		break;
+	case QT2_MODEM_STATUS:
+		qt2_update_msr(port, ch + 1);
+		break;
+	}
+}
+
+/* not needed, kept to document functionality */
+static void qt2_process_xmit_empty(struct usb_serial_port *port,
+				   unsigned char *ch)
+{
+	int bytes_written;
+
+	bytes_written = (int)(*ch) + (int)(*(ch + 1) << 4);
+}
+
+/* not needed, kept to document functionality */
+static void qt2_process_flush(struct usb_serial_port *port, unsigned char *ch)
+{
+	return;
+}
+
+void qt2_process_read_urb(struct urb *urb)
+{
+	struct usb_serial *serial;
+	struct qt2_serial_private *serial_priv;
+	struct usb_serial_port *port;
+	struct qt2_port_private *port_priv;
+	struct tty_struct *tty;
+	bool escapeflag;
+	unsigned char *ch;
+	int i;
+	unsigned char newport;
+	int len = urb->actual_length;
+
+	if (!len)
+		return;
+
+	ch = urb->transfer_buffer;
+	tty = NULL;
+	serial = urb->context;
+	serial_priv = usb_get_serial_data(serial);
+	port = serial->port[serial_priv->current_port];
+	port_priv = usb_get_serial_port_data(port);
+
+	if (port_priv->is_open)
+		tty = tty_port_tty_get(&port->port);
+
+	for (i = 0; i < urb->actual_length; i++) {
+		ch = (unsigned char *)urb->transfer_buffer + i;
+		if ((i <= (len - 3)) &&
+		    (*ch == QT2_CONTROL_BYTE) &&
+		    (*(ch + 1) == QT2_CONTROL_BYTE)) {
+			escapeflag = false;
+			switch (*(ch + 2)) {
+			case QT2_LINE_STATUS:
+			case QT2_MODEM_STATUS:
+				if (i > (len - 4)) {
+					dev_warn(&port->dev,
+						 "%s - status message too short\n",
+						__func__);
+					break;
+				}
+				qt2_process_status(port, ch + 2);
+				i += 3;
+				escapeflag = true;
+				break;
+			case QT2_XMIT_HOLD:
+				if (i > (len - 5)) {
+					dev_warn(&port->dev,
+						 "%s - xmit_empty message too short\n",
+						 __func__);
+					break;
+				}
+				qt2_process_xmit_empty(port, ch + 3);
+				i += 4;
+				escapeflag = true;
+				break;
+			case QT2_CHANGE_PORT:
+				if (i > (len - 4)) {
+					dev_warn(&port->dev,
+						 "%s - change_port message too short\n",
+						 __func__);
+					break;
+				}
+				if (tty) {
+					tty_flip_buffer_push(tty);
+					tty_kref_put(tty);
+				}
+
+				newport = *(ch + 3);
+
+				if (newport > serial->num_ports) {
+					dev_err(&port->dev,
+						"%s - port change to invalid port: %i\n",
+						__func__, newport);
+					break;
+				}
+
+				serial_priv->current_port = newport;
+				port = serial->port[serial_priv->current_port];
+				port_priv = usb_get_serial_port_data(port);
+				if (port_priv->is_open)
+					tty = tty_port_tty_get(&port->port);
+				else
+					tty = NULL;
+				i += 3;
+				escapeflag = true;
+				break;
+			case QT2_REC_FLUSH:
+			case QT2_XMIT_FLUSH:
+				qt2_process_flush(port, ch + 2);
+				i += 2;
+				escapeflag = true;
+				break;
+			case QT2_CONTROL_ESCAPE:
+				tty_buffer_request_room(tty, 2);
+				tty_insert_flip_string(tty, ch, 2);
+				i += 2;
+				escapeflag = true;
+				break;
+			default:
+				dev_warn(&port->dev,
+					 "%s - unsupported command %i\n",
+					 __func__, *(ch + 2));
+				break;
+			}
+			if (escapeflag)
+				continue;
+		}
+
+		if (tty) {
+			tty_buffer_request_room(tty, 1);
+			tty_insert_flip_string(tty, ch, 1);
+		}
+	}
+
+	if (tty) {
+		tty_flip_buffer_push(tty);
+		tty_kref_put(tty);
+	}
+}
+
+static void qt2_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	struct qt2_port_private *port_priv;
+
+	port = urb->context;
+	port_priv = usb_get_serial_port_data(port);
+
+	spin_lock(&port_priv->urb_lock);
+
+	port_priv->urb_in_use = false;
+	usb_serial_port_softint(port);
+
+	spin_unlock(&port_priv->urb_lock);
+
+}
+
+static void qt2_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial *serial = urb->context;
+	int status;
+
+	if (urb->status) {
+		dev_warn(&serial->dev->dev,
+			 "%s - non-zero urb status: %i\n", __func__,
+			 urb->status);
+		return;
+	}
+
+	qt2_process_read_urb(urb);
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status != 0)
+		dev_err(&serial->dev->dev,
+			"%s - resubmit read urb failed: %i\n",
+			__func__, status);
+}
+
+static int qt2_setup_urbs(struct usb_serial *serial)
+{
+	struct usb_serial_port *port;
+	struct usb_serial_port *port0;
+	struct qt2_serial_private *serial_priv;
+	struct qt2_port_private *port_priv;
+	int pcount, status;
+
+	port0 = serial->port[0];
+
+	serial_priv = usb_get_serial_data(serial);
+	serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!serial_priv->read_urb) {
+		dev_err(&serial->dev->dev, "No free urbs available\n");
+		return -ENOMEM;
+	}
+
+	usb_fill_bulk_urb(serial_priv->read_urb, serial->dev,
+			  usb_rcvbulkpipe(serial->dev,
+					  port0->bulk_in_endpointAddress),
+			  serial_priv->read_buffer,
+			  sizeof(serial_priv->read_buffer),
+			  qt2_read_bulk_callback, serial);
+
+	/* setup write_urb for each port */
+	for (pcount = 0; pcount < serial->num_ports; pcount++) {
+
+		port = serial->port[pcount];
+		port_priv = usb_get_serial_port_data(port);
+
+		port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!port_priv->write_urb) {
+			dev_err(&serial->dev->dev,
+				"failed to alloc write_urb for port %i\n",
+				pcount);
+			return -ENOMEM;
+		}
+
+		usb_fill_bulk_urb(port_priv->write_urb,
+				  serial->dev,
+				  usb_sndbulkpipe(serial->dev,
+						  port0->
+						  bulk_out_endpointAddress),
+				  port_priv->write_buffer,
+				  sizeof(port_priv->write_buffer),
+				  qt2_write_bulk_callback, port);
+	}
+
+	status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL);
+	if (status != 0) {
+		dev_err(&serial->dev->dev,
+			"%s - submit read urb failed %i\n", __func__, status);
+		return status;
+	}
+
+	return 0;
+
+}
+
+static int qt2_attach(struct usb_serial *serial)
+{
+	struct qt2_serial_private *serial_priv;
+	struct qt2_port_private *port_priv;
+	int status, pcount;
+
+	/* power on unit */
+	status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+				 0xc2, 0x40, 0x8000, 0, NULL, 0,
+				 QT2_USB_TIMEOUT);
+	if (status < 0) {
+		dev_err(&serial->dev->dev,
+			"%s - failed to power on unit: %i\n", __func__, status);
+		return status;
+	}
+
+	serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
+	if (!serial_priv) {
+		dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	usb_set_serial_data(serial, serial_priv);
+
+	for (pcount = 0; pcount < serial->num_ports; pcount++) {
+		port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+		if (!port_priv) {
+			dev_err(&serial->dev->dev,
+				"%s- kmalloc(%Zd) failed.\n", __func__,
+				sizeof(*port_priv));
+			pcount--;
+			status = -ENOMEM;
+			goto attach_failed;
+		}
+
+		spin_lock_init(&port_priv->lock);
+		spin_lock_init(&port_priv->urb_lock);
+		init_waitqueue_head(&port_priv->delta_msr_wait);
+
+		port_priv->port = serial->port[pcount];
+
+		usb_set_serial_port_data(serial->port[pcount], port_priv);
+	}
+
+	status = qt2_setup_urbs(serial);
+	if (status != 0)
+		goto attach_failed;
+
+	return 0;
+
+attach_failed:
+	for (/* empty */; pcount >= 0; pcount--) {
+		port_priv = usb_get_serial_port_data(serial->port[pcount]);
+		kfree(port_priv);
+	}
+	kfree(serial_priv);
+	return status;
+}
+
+static int qt2_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_device *dev = port->serial->dev;
+	struct qt2_port_private *port_priv = usb_get_serial_port_data(port);
+	u8 *d;
+	int r;
+
+	d = kzalloc(2, GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	r = qt2_getregister(dev, port_priv->device_port, UART_MCR, d);
+	if (r < 0)
+		goto mget_out;
+
+	r = qt2_getregister(dev, port_priv->device_port, UART_MSR, d + 1);
+	if (r < 0)
+		goto mget_out;
+
+	r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) |
+	    (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) |
+	    (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) |
+	    (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) |
+	    (d[1] & UART_MSR_RI ? TIOCM_RI : 0) |
+	    (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+mget_out:
+	kfree(d);
+	return r;
+}
+
+static int qt2_tiocmset(struct tty_struct *tty,
+			unsigned int set, unsigned int clear)
+{
+	struct qt2_port_private *port_priv;
+
+	port_priv = usb_get_serial_port_data(tty->driver_data);
+	return update_mctrl(port_priv, set, clear);
+}
+
+static void qt2_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct qt2_port_private *port_priv;
+	int status;
+	u16 val;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	if (!port_priv->is_open) {
+		dev_err(&port->dev,
+			"%s - port is not open\n", __func__);
+		return;
+	}
+
+	val = (break_state == -1) ? 1 : 0;
+
+	status = qt2_control_msg(port->serial->dev, QT2_BREAK_CONTROL,
+				 val, port_priv->device_port);
+	if (status < 0)
+		dev_warn(&port->dev,
+			 "%s - failed to send control message: %i\n", __func__,
+			 status);
+}
+
+
+
+static void qt2_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct qt2_port_private *port_priv = usb_get_serial_port_data(port);
+
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected) {
+		/* Disable flow control */
+		if (!on && qt2_setregister(dev, port_priv->device_port,
+					   UART_MCR, 0) < 0)
+			dev_warn(&port->dev, "error from flowcontrol urb\n");
+		/* drop RTS and DTR */
+		if (on)
+			update_mctrl(port_priv, TIOCM_DTR | TIOCM_RTS, 0);
+		else
+			update_mctrl(port_priv, 0, TIOCM_DTR | TIOCM_RTS);
+	}
+	mutex_unlock(&port->serial->disc_mutex);
+}
+
+static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch)
+{
+	struct qt2_port_private *port_priv;
+	u8 newMSR = (u8) *ch;
+	unsigned long flags;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	spin_lock_irqsave(&port_priv->lock, flags);
+	port_priv->shadowMSR = newMSR;
+	spin_unlock_irqrestore(&port_priv->lock, flags);
+
+	if (newMSR & UART_MSR_ANY_DELTA) {
+		/* update input line counters */
+		if (newMSR & UART_MSR_DCTS)
+			port_priv->icount.cts++;
+
+		if (newMSR & UART_MSR_DDSR)
+			port_priv->icount.dsr++;
+
+		if (newMSR & UART_MSR_DDCD)
+			port_priv->icount.dcd++;
+
+		if (newMSR & UART_MSR_TERI)
+			port_priv->icount.rng++;
+
+		wake_up_interruptible(&port_priv->delta_msr_wait);
+	}
+}
+
+static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch)
+{
+	struct qt2_port_private *port_priv;
+	struct async_icount *icount;
+	unsigned long flags;
+	u8 newLSR = (u8) *ch;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	if (newLSR & UART_LSR_BI)
+		newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI);
+
+	spin_lock_irqsave(&port_priv->lock, flags);
+	port_priv->shadowLSR = newLSR;
+	spin_unlock_irqrestore(&port_priv->lock, flags);
+
+	icount = &port_priv->icount;
+
+	if (newLSR & UART_LSR_BRK_ERROR_BITS) {
+
+		if (newLSR & UART_LSR_BI)
+			icount->brk++;
+
+		if (newLSR & UART_LSR_OE)
+			icount->overrun++;
+
+		if (newLSR & UART_LSR_PE)
+			icount->parity++;
+
+		if (newLSR & UART_LSR_FE)
+			icount->frame++;
+	}
+
+}
+
+static int qt2_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct qt2_port_private *port_priv;
+	unsigned long flags = 0;
+	int r;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	spin_lock_irqsave(&port_priv->urb_lock, flags);
+
+	if (port_priv->urb_in_use)
+		r = 0;
+	else
+		r = QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE;
+
+	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
+
+	return r;
+}
+
+static int qt2_write(struct tty_struct *tty,
+		     struct usb_serial_port *port,
+		     const unsigned char *buf, int count)
+{
+	struct qt2_port_private *port_priv;
+	struct urb *write_urb;
+	unsigned char *data;
+	unsigned long flags;
+	int status;
+	int bytes_out = 0;
+
+	port_priv = usb_get_serial_port_data(port);
+
+	if (port_priv->write_urb == NULL) {
+		dev_err(&port->dev, "%s - no output urb\n", __func__);
+		return 0;
+	}
+	write_urb = port_priv->write_urb;
+
+	count = min(count, QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE);
+
+	data = write_urb->transfer_buffer;
+	spin_lock_irqsave(&port_priv->urb_lock, flags);
+	if (port_priv->urb_in_use == true) {
+		printk(KERN_INFO "qt2_write - urb is in use\n");
+		goto write_out;
+	}
+
+	*data++ = QT2_CONTROL_BYTE;
+	*data++ = QT2_CONTROL_BYTE;
+	*data++ = port_priv->device_port;
+	put_unaligned_le16(count, data);
+	data += 2;
+	memcpy(data, buf, count);
+
+	write_urb->transfer_buffer_length = count + QT2_WRITE_CONTROL_SIZE;
+
+	status = usb_submit_urb(write_urb, GFP_ATOMIC);
+	if (status == 0) {
+		port_priv->urb_in_use = true;
+		bytes_out += count;
+	}
+
+write_out:
+	spin_unlock_irqrestore(&port_priv->urb_lock, flags);
+	return bytes_out;
+}
+
+
+static struct usb_serial_driver qt2_device = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "quatech-serial",
+	},
+	.description	     = DRIVER_DESC,
+	.id_table	     = id_table,
+	.open		     = qt2_open,
+	.close		     = qt2_close,
+	.write               = qt2_write,
+	.write_room          = qt2_write_room,
+	.calc_num_ports      = qt2_calc_num_ports,
+	.attach              = qt2_attach,
+	.release             = qt2_release,
+	.disconnect          = qt2_disconnect,
+	.dtr_rts             = qt2_dtr_rts,
+	.break_ctl           = qt2_break_ctl,
+	.tiocmget            = qt2_tiocmget,
+	.tiocmset            = qt2_tiocmset,
+	.get_icount	     = qt2_get_icount,
+	.ioctl               = qt2_ioctl,
+	.set_termios         = qt2_set_termios,
+};
+
+static struct usb_serial_driver *const serial_drivers[] = {
+	&qt2_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index ae4ee30c7411..36e9d9fc0618 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -151,13 +151,6 @@ static struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver safe_driver = {
-	.name =		"safe_serial",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static const __u16 crc10_table[256] = {
 	0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff,
 	0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe,
@@ -339,12 +332,12 @@ static int __init safe_init(void)
 		}
 	}
 
-	return usb_serial_register_drivers(&safe_driver, serial_drivers);
+	return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, id_table);
 }
 
 static void __exit safe_exit(void)
 {
-	usb_serial_deregister_drivers(&safe_driver, serial_drivers);
+	usb_serial_deregister_drivers(serial_drivers);
 }
 
 module_init(safe_init);
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index 46c0430fd38b..e4a1787cdbac 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -29,13 +29,6 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver siemens_usb_mpi_driver = {
-	.name =		"siemens_mpi",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver siemens_usb_mpi_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -49,7 +42,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&siemens_usb_mpi_device, NULL
 };
 
-module_usb_serial_driver(siemens_usb_mpi_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 8c8bf806f6fa..ba54a0a8235c 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -63,9 +63,7 @@ struct sierra_intf_private {
 
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
-	int result;
-	dev_dbg(&udev->dev, "%s\n", __func__);
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetPower,	/* __u8 request      */
 			USB_TYPE_VENDOR,		/* __u8 request type */
 			swiState,			/* __u16 value       */
@@ -73,14 +71,11 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 			NULL,				/* void *data        */
 			0,				/* __u16 size 	     */
 			USB_CTRL_SET_TIMEOUT);		/* int timeout 	     */
-	return result;
 }
 
 static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
 {
-	int result;
-	dev_dbg(&udev->dev, "%s\n", __func__);
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetNmea,	/* __u8 request      */
 			USB_TYPE_VENDOR,		/* __u8 request type */
 			enable,				/* __u16 value       */
@@ -88,7 +83,6 @@ static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
 			NULL,				/* void *data        */
 			0,				/* __u16 size 	     */
 			USB_CTRL_SET_TIMEOUT);		/* int timeout       */
-	return result;
 }
 
 static int sierra_calc_num_ports(struct usb_serial *serial)
@@ -96,8 +90,6 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 	int num_ports = 0;
 	u8 ifnum, numendpoints;
 
-	dev_dbg(&serial->dev->dev, "%s\n", __func__);
-
 	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
 
@@ -150,7 +142,6 @@ static int sierra_calc_interface(struct usb_serial *serial)
 	int interface;
 	struct usb_interface *p_interface;
 	struct usb_host_interface *p_host_interface;
-	dev_dbg(&serial->dev->dev, "%s\n", __func__);
 
 	/* Get the interface structure pointer from the serial struct */
 	p_interface = serial->interface;
@@ -175,9 +166,8 @@ static int sierra_probe(struct usb_serial *serial,
 	u8 ifnum;
 
 	udev = serial->dev;
-	dev_dbg(&udev->dev, "%s\n", __func__);
-
 	ifnum = sierra_calc_interface(serial);
+
 	/*
 	 * If this interface supports more than 1 alternate
 	 * select the 2nd one
@@ -344,8 +334,6 @@ static int sierra_send_setup(struct usb_serial_port *port)
 	int do_send = 0;
 	int retval;
 
-	dev_dbg(&port->dev, "%s\n", __func__);
-
 	portdata = usb_get_serial_port_data(port);
 
 	if (portdata->dtr_state)
@@ -393,7 +381,6 @@ static int sierra_send_setup(struct usb_serial_port *port)
 static void sierra_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	dev_dbg(&port->dev, "%s\n", __func__);
 	tty_termios_copy_hw(tty->termios, old_termios);
 	sierra_send_setup(port);
 }
@@ -404,7 +391,6 @@ static int sierra_tiocmget(struct tty_struct *tty)
 	unsigned int value;
 	struct sierra_port_private *portdata;
 
-	dev_dbg(&port->dev, "%s\n", __func__);
 	portdata = usb_get_serial_port_data(port);
 
 	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
@@ -441,8 +427,7 @@ static void sierra_release_urb(struct urb *urb)
 {
 	struct usb_serial_port *port;
 	if (urb) {
-		port =  urb->context;
-		dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
+		port = urb->context;
 		kfree(urb->transfer_buffer);
 		usb_free_urb(urb);
 	}
@@ -455,7 +440,6 @@ static void sierra_outdat_callback(struct urb *urb)
 	struct sierra_intf_private *intfdata;
 	int status = urb->status;
 
-	dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
 	intfdata = port->serial->private;
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
@@ -598,8 +582,6 @@ static void sierra_indat_callback(struct urb *urb)
 	endpoint = usb_pipeendpoint(urb->pipe);
 	port = urb->context;
 
-	dev_dbg(&port->dev, "%s: %p\n", __func__, urb);
-
 	if (status) {
 		dev_dbg(&port->dev, "%s: nonzero status: %d on"
 			" endpoint %02x\n", __func__, status, endpoint);
@@ -697,8 +679,6 @@ static int sierra_write_room(struct tty_struct *tty)
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 	unsigned long flags;
 
-	dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
-
 	/* try to give a good number back based on if we have any free urbs at
 	 * this point in time */
 	spin_lock_irqsave(&portdata->lock, flags);
@@ -805,8 +785,6 @@ static void sierra_close(struct usb_serial_port *port)
 	struct sierra_port_private *portdata;
 	struct sierra_intf_private *intfdata = port->serial->private;
 
-
-	dev_dbg(&port->dev, "%s\n", __func__);
 	portdata = usb_get_serial_port_data(port);
 
 	portdata->rts_state = 0;
@@ -851,8 +829,6 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	portdata = usb_get_serial_port_data(port);
 
-	dev_dbg(&port->dev, "%s\n", __func__);
-
 	/* Set some sane defaults */
 	portdata->rts_state = 1;
 	portdata->dtr_state = 1;
@@ -915,8 +891,6 @@ static int sierra_startup(struct usb_serial *serial)
 	int i;
 	u8 ifnum;
 
-	dev_dbg(&serial->dev->dev, "%s\n", __func__);
-
 	/* Set Device mode to D0 */
 	sierra_set_power_state(serial->dev, 0x0000);
 
@@ -977,8 +951,6 @@ static void sierra_release(struct usb_serial *serial)
 	struct usb_serial_port *port;
 	struct sierra_port_private *portdata;
 
-	dev_dbg(&serial->dev->dev, "%s\n", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (!port)
@@ -1067,29 +1039,11 @@ static int sierra_resume(struct usb_serial *serial)
 	return ec ? -EIO : 0;
 }
 
-static int sierra_reset_resume(struct usb_interface *intf)
-{
-	struct usb_serial *serial = usb_get_intfdata(intf);
-	dev_err(&serial->dev->dev, "%s\n", __func__);
-	return usb_serial_resume(intf);
-}
 #else
 #define sierra_suspend NULL
 #define sierra_resume NULL
-#define sierra_reset_resume NULL
 #endif
 
-static struct usb_driver sierra_driver = {
-	.name       = "sierra",
-	.probe      = usb_serial_probe,
-	.disconnect = usb_serial_disconnect,
-	.suspend    = usb_serial_suspend,
-	.resume     = usb_serial_resume,
-	.reset_resume = sierra_reset_resume,
-	.id_table   = id_table,
-	.supports_autosuspend =	1,
-};
-
 static struct usb_serial_driver sierra_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -1118,7 +1072,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&sierra_device, NULL
 };
 
-module_usb_serial_driver(sierra_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index f06c9a8f3d37..cad608984710 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -151,14 +151,6 @@ enum spcp8x5_type {
 	SPCP835_TYPE,
 };
 
-static struct usb_driver spcp8x5_driver = {
-	.name =			"spcp8x5",
-	.probe =		usb_serial_probe,
-	.disconnect =		usb_serial_disconnect,
-	.id_table =		id_table,
-};
-
-
 struct spcp8x5_private {
 	spinlock_t 	lock;
 	enum spcp8x5_type	type;
@@ -433,7 +425,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	if (i < 0)
 		dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
 			uartdata, i);
-	dbg("0x21:0x40:0:0  %d", i);
+	dev_dbg(&port->dev, "0x21:0x40:0:0  %d\n", i);
 
 	if (cflag & CRTSCTS) {
 		/* enable hardware flow control */
@@ -454,8 +446,6 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 	u8 status = 0x30;
 	/* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */
 
-	dbg("%s -  port %d", __func__, port->number);
-
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
@@ -579,15 +569,19 @@ static int spcp8x5_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+	dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__,
+		port->number, cmd);
 
 	switch (cmd) {
 	case TIOCMIWAIT:
-		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,
+			port->number);
 		return spcp8x5_wait_modem_info(port, arg);
 
 	default:
-		dbg("%s not supported = 0x%04x", __func__, cmd);
+		dev_dbg(&port->dev, "%s not supported = 0x%04x", __func__,
+			cmd);
 		break;
 	}
 
@@ -666,7 +660,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&spcp8x5_device, NULL
 };
 
-module_usb_serial_driver(spcp8x5_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 3cdc8a52de44..3fee23bf0c14 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -59,20 +59,8 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
 	{}			/* Terminating entry */
 };
-
 MODULE_DEVICE_TABLE(usb, id_table);
 
-
-static struct usb_driver ssu100_driver = {
-	.name			       = "ssu100",
-	.probe			       = usb_serial_probe,
-	.disconnect		       = usb_serial_disconnect,
-	.id_table		       = id_table,
-	.suspend		       = usb_serial_suspend,
-	.resume			       = usb_serial_resume,
-	.supports_autosuspend	       = 1,
-};
-
 struct ssu100_port_private {
 	spinlock_t status_lock;
 	u8 shadowLSR;
@@ -85,7 +73,6 @@ static void ssu100_release(struct usb_serial *serial)
 {
 	struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port);
 
-	dbg("%s", __func__);
 	kfree(priv);
 }
 
@@ -171,8 +158,6 @@ static int ssu100_initdevice(struct usb_device *dev)
 	u8 *data;
 	int result = 0;
 
-	dbg("%s", __func__);
-
 	data = kzalloc(3, GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -237,8 +222,6 @@ static void ssu100_set_termios(struct tty_struct *tty,
 	u16 urb_value = 0; /* will hold the new flags */
 	int result;
 
-	dbg("%s", __func__);
-
 	if (cflag & PARENB) {
 		if (cflag & PARODD)
 			urb_value |= UART_LCR_PARITY;
@@ -312,8 +295,6 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
 	int result;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	data = kzalloc(2, GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -348,7 +329,6 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void ssu100_close(struct usb_serial_port *port)
 {
-	dbg("%s", __func__);
 	usb_serial_generic_close(port);
 }
 
@@ -467,8 +447,6 @@ static int ssu100_attach(struct usb_serial *serial)
 	struct ssu100_port_private *priv;
 	struct usb_serial_port *port = *serial->port;
 
-	dbg("%s", __func__);
-
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
 		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
@@ -490,8 +468,6 @@ static int ssu100_tiocmget(struct tty_struct *tty)
 	u8 *d;
 	int r;
 
-	dbg("%s\n", __func__);
-
 	d = kzalloc(2, GFP_KERNEL);
 	if (!d)
 		return -ENOMEM;
@@ -522,7 +498,6 @@ static int ssu100_tiocmset(struct tty_struct *tty,
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_device *dev = port->serial->dev;
 
-	dbg("%s\n", __func__);
 	return update_mctrl(dev, set, clear);
 }
 
@@ -530,8 +505,6 @@ static void ssu100_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct usb_device *dev = port->serial->dev;
 
-	dbg("%s\n", __func__);
-
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected) {
 		/* Disable flow control */
@@ -618,8 +591,6 @@ static int ssu100_process_packet(struct urb *urb,
 	int i;
 	char *ch;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if ((len >= 4) &&
 	    (packet[0] == 0x1b) && (packet[1] == 0x1b) &&
 	    ((packet[2] == 0x00) || (packet[2] == 0x01))) {
@@ -656,8 +627,6 @@ static void ssu100_process_read_urb(struct urb *urb)
 	struct tty_struct *tty;
 	int count;
 
-	dbg("%s", __func__);
-
 	tty = tty_port_tty_get(&port->port);
 	if (!tty)
 		return;
@@ -695,7 +664,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&ssu100_device, NULL
 };
 
-module_usb_serial_driver(ssu100_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 1a5be136e6cf..e53d2aac35c5 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -54,8 +54,6 @@ static void symbol_int_callback(struct urb *urb)
 	int result;
 	int data_length;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -64,12 +62,12 @@ static void symbol_int_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
 		goto exit;
 	}
 
@@ -125,8 +123,6 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port)
 	unsigned long flags;
 	int result = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->throttled = false;
 	priv->actually_throttled = false;
@@ -150,8 +146,6 @@ static void symbol_close(struct usb_serial_port *port)
 {
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
 
-	dbg("%s - port %d", __func__, port->number);
-
 	/* shutdown our urbs */
 	usb_kill_urb(priv->int_urb);
 }
@@ -161,7 +155,6 @@ static void symbol_throttle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
 
-	dbg("%s - port %d", __func__, port->number);
 	spin_lock_irq(&priv->lock);
 	priv->throttled = true;
 	spin_unlock_irq(&priv->lock);
@@ -174,8 +167,6 @@ static void symbol_unthrottle(struct tty_struct *tty)
 	int result;
 	bool was_throttled;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irq(&priv->lock);
 	priv->throttled = false;
 	was_throttled = priv->actually_throttled;
@@ -266,8 +257,6 @@ static void symbol_disconnect(struct usb_serial *serial)
 {
 	struct symbol_private *priv = usb_get_serial_data(serial);
 
-	dbg("%s", __func__);
-
 	usb_kill_urb(priv->int_urb);
 	usb_free_urb(priv->int_urb);
 }
@@ -276,19 +265,10 @@ static void symbol_release(struct usb_serial *serial)
 {
 	struct symbol_private *priv = usb_get_serial_data(serial);
 
-	dbg("%s", __func__);
-
 	kfree(priv->int_buffer);
 	kfree(priv);
 }
 
-static struct usb_driver symbol_driver = {
-	.name =			"symbol",
-	.probe =		usb_serial_probe,
-	.disconnect =		usb_serial_disconnect,
-	.id_table =		id_table,
-};
-
 static struct usb_serial_driver symbol_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -309,7 +289,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&symbol_device, NULL
 };
 
-module_usb_serial_driver(symbol_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index ab74123d658e..a4404f5ad68e 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -165,7 +165,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[15+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -180,6 +180,7 @@ static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
 	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -189,7 +190,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[19+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -208,16 +209,10 @@ static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1]
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 	{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
 	{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
+	{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
 	{ }
 };
 
-static struct usb_driver ti_usb_driver = {
-	.name			= "ti_usb_3410_5052",
-	.probe			= usb_serial_probe,
-	.disconnect		= usb_serial_disconnect,
-	.id_table		= ti_id_table_combined,
-};
-
 static struct usb_serial_driver ti_1port_device = {
 	.driver = {
 		.owner		= THIS_MODULE,
@@ -344,20 +339,18 @@ static int __init ti_init(void)
 		ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 	}
 
-	ret = usb_serial_register_drivers(&ti_usb_driver, serial_drivers);
+	ret = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ti_id_table_combined);
 	if (ret == 0)
 		printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":"
 			       TI_DRIVER_DESC "\n");
 	return ret;
 }
 
-
 static void __exit ti_exit(void)
 {
-	usb_serial_deregister_drivers(&ti_usb_driver, serial_drivers);
+	usb_serial_deregister_drivers(serial_drivers);
 }
 
-
 module_init(ti_init);
 module_exit(ti_exit);
 
@@ -394,7 +387,9 @@ static int ti_startup(struct usb_serial *serial)
 
 	/* if we have only 1 configuration, download firmware */
 	if (dev->descriptor.bNumConfigurations == 1) {
-		if ((status = ti_download_firmware(tdev)) != 0)
+		status = ti_download_firmware(tdev);
+
+		if (status != 0)
 			goto free_tdev;
 
 		/* 3410 must be reset, 5052 resets itself */
@@ -463,8 +458,6 @@ static void ti_release(struct usb_serial *serial)
 	struct ti_device *tdev = usb_get_serial_data(serial);
 	struct ti_port *tport;
 
-	dbg("%s", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i) {
 		tport = usb_get_serial_port_data(serial->port[i]);
 		if (tport) {
@@ -489,8 +482,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 			     TI_PIPE_TIMEOUT_ENABLE |
 			     (TI_TRANSFER_TIMEOUT << 2));
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (tport == NULL)
 		return -ENODEV;
 
@@ -631,8 +622,6 @@ static void ti_close(struct usb_serial_port *port)
 	int status;
 	int do_unlock;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	tdev = usb_get_serial_data(port->serial);
 	tport = usb_get_serial_port_data(port);
 	if (tdev == NULL || tport == NULL)
@@ -666,8 +655,6 @@ static void ti_close(struct usb_serial_port *port)
 	}
 	if (do_unlock)
 		mutex_unlock(&tdev->td_open_close_lock);
-
-	dbg("%s - exit", __func__);
 }
 
 
@@ -676,8 +663,6 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (count == 0) {
 		dbg("%s - write request of 0 bytes", __func__);
 		return 0;
@@ -701,8 +686,6 @@ static int ti_write_room(struct tty_struct *tty)
 	int room = 0;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (tport == NULL)
 		return 0;
 
@@ -722,8 +705,6 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
 	int chars = 0;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (tport == NULL)
 		return 0;
 
@@ -741,8 +722,6 @@ static void ti_throttle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (tport == NULL)
 		return;
 
@@ -758,8 +737,6 @@ static void ti_unthrottle(struct tty_struct *tty)
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int status;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (tport == NULL)
 		return;
 
@@ -854,8 +831,6 @@ static void ti_set_termios(struct tty_struct *tty,
 	int port_number = port->number - port->serial->minor;
 	unsigned int mcr;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	cflag = tty->termios->c_cflag;
 	iflag = tty->termios->c_iflag;
 
@@ -988,8 +963,6 @@ static int ti_tiocmget(struct tty_struct *tty)
 	unsigned int mcr;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (tport == NULL)
 		return -ENODEV;
 
@@ -1020,8 +993,6 @@ static int ti_tiocmset(struct tty_struct *tty,
 	unsigned int mcr;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (tport == NULL)
 		return -ENODEV;
 
@@ -1084,8 +1055,6 @@ static void ti_interrupt_callback(struct urb *urb)
 	int retval;
 	__u8 msr;
 
-	dbg("%s", __func__);
-
 	switch (status) {
 	case 0:
 		break;
@@ -1165,8 +1134,6 @@ static void ti_bulk_in_callback(struct urb *urb)
 	int retval = 0;
 	struct tty_struct *tty;
 
-	dbg("%s", __func__);
-
 	switch (status) {
 	case 0:
 		break;
@@ -1233,8 +1200,6 @@ static void ti_bulk_out_callback(struct urb *urb)
 	struct usb_serial_port *port = tport->tp_port;
 	int status = urb->status;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	tport->tp_write_urb_in_use = 0;
 
 	switch (status) {
@@ -1287,9 +1252,6 @@ static void ti_send(struct ti_port *tport)
 	struct tty_struct *tty = tty_port_tty_get(&port->port);	/* FIXME */
 	unsigned long flags;
 
-
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irqsave(&tport->tp_lock, flags);
 
 	if (tport->tp_write_urb_in_use)
@@ -1366,8 +1328,6 @@ static int ti_get_lsr(struct ti_port *tport)
 	int port_number = port->number - port->serial->minor;
 	struct ti_port_status *data;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	size = sizeof(struct ti_port_status);
 	data = kmalloc(size, GFP_KERNEL);
 	if (!data) {
@@ -1480,8 +1440,6 @@ static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush)
 	struct usb_serial_port *port = tport->tp_port;
 	wait_queue_t wait;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	spin_lock_irq(&tport->tp_lock);
 
 	/* wait for data to drain from the buffer */
@@ -1679,11 +1637,12 @@ static int ti_download_firmware(struct ti_device *tdev)
 	const struct firmware *fw_p;
 	char buf[32];
 
-	dbg("%s\n", __func__);
 	/* try ID specific firmware first, then try generic firmware */
 	sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
 	    dev->descriptor.idProduct);
-	if ((status = request_firmware(&fw_p, buf, &dev->dev)) != 0) {
+	status = request_firmware(&fw_p, buf, &dev->dev);
+
+	if (status != 0) {
 		buf[0] = '\0';
 		if (dev->descriptor.idVendor == MTS_VENDOR_ID) {
 			switch (dev->descriptor.idProduct) {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index f140f1b9d5c0..b353e7e3d480 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -37,6 +37,7 @@
 #define TI_5152_BOOT_PRODUCT_ID		0x5152	/* no EEPROM, no firmware */
 #define TI_5052_EEPROM_PRODUCT_ID	0x505A	/* EEPROM, no firmware */
 #define TI_5052_FIRMWARE_PRODUCT_ID	0x505F	/* firmware is running */
+#define FRI2_PRODUCT_ID			0x5053  /* Fish River Island II */
 
 /* Multi-Tech vendor and product ids */
 #define MTS_VENDOR_ID			0x06E0
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 97355a15bbea..6a1b609a0d94 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1,7 +1,7 @@
 /*
  * USB Serial Converter driver
  *
- * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
  * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
  *
@@ -43,17 +43,6 @@
 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
 #define DRIVER_DESC "USB Serial Driver core"
 
-/* Driver structure we register with the USB core */
-static struct usb_driver usb_serial_driver = {
-	.name =		"usbserial",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.suspend =	usb_serial_suspend,
-	.resume =	usb_serial_resume,
-	.no_dynamic_id =	1,
-	.supports_autosuspend =	1,
-};
-
 /* There is no MODULE_DEVICE_TABLE for usbserial.c.  Instead
    the MODULE_DEVICE_TABLE declarations in each serial driver
    cause the "hotplug" program to pull in whatever module is necessary
@@ -710,7 +699,7 @@ static const struct tty_port_operations serial_port_ops = {
 	.shutdown = serial_down,
 };
 
-int usb_serial_probe(struct usb_interface *interface,
+static int usb_serial_probe(struct usb_interface *interface,
 			       const struct usb_device_id *id)
 {
 	struct usb_device *dev = interface_to_usbdev(interface);
@@ -856,6 +845,8 @@ int usb_serial_probe(struct usb_interface *interface,
 			module_put(type->driver.owner);
 			return -EIO;
 		}
+		dev_info(&interface->dev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n");
+		dev_info(&interface->dev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n");
 	}
 #endif
 	if (!num_ports) {
@@ -1043,6 +1034,8 @@ int usb_serial_probe(struct usb_interface *interface,
 		dbg("the device claims to support interrupt out transfers, but write_int_callback is not defined");
 	}
 
+	usb_set_intfdata(interface, serial);
+
 	/* if this device type has an attach function, call it */
 	if (type->attach) {
 		retval = type->attach(serial);
@@ -1087,10 +1080,7 @@ int usb_serial_probe(struct usb_interface *interface,
 	serial->disconnected = 0;
 
 	usb_serial_console_init(debug, minor);
-
 exit:
-	/* success */
-	usb_set_intfdata(interface, serial);
 	module_put(type->driver.owner);
 	return 0;
 
@@ -1099,9 +1089,8 @@ probe_error:
 	module_put(type->driver.owner);
 	return -EIO;
 }
-EXPORT_SYMBOL_GPL(usb_serial_probe);
 
-void usb_serial_disconnect(struct usb_interface *interface)
+static void usb_serial_disconnect(struct usb_interface *interface)
 {
 	int i;
 	struct usb_serial *serial = usb_get_intfdata(interface);
@@ -1112,7 +1101,6 @@ void usb_serial_disconnect(struct usb_interface *interface)
 	dbg("%s", __func__);
 
 	mutex_lock(&serial->disc_mutex);
-	usb_set_intfdata(interface, NULL);
 	/* must set a flag, to signal subdrivers */
 	serial->disconnected = 1;
 	mutex_unlock(&serial->disc_mutex);
@@ -1137,7 +1125,6 @@ void usb_serial_disconnect(struct usb_interface *interface)
 	usb_serial_put(serial);
 	dev_info(dev, "device disconnected\n");
 }
-EXPORT_SYMBOL_GPL(usb_serial_disconnect);
 
 int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
 {
@@ -1181,6 +1168,22 @@ int usb_serial_resume(struct usb_interface *intf)
 }
 EXPORT_SYMBOL(usb_serial_resume);
 
+static int usb_serial_reset_resume(struct usb_interface *intf)
+{
+	struct usb_serial *serial = usb_get_intfdata(intf);
+	int rv;
+
+	serial->suspending = 0;
+	if (serial->type->reset_resume)
+		rv = serial->type->reset_resume(serial);
+	else {
+		rv = -EOPNOTSUPP;
+		intf->needs_binding = 1;
+	}
+
+	return rv;
+}
+
 static const struct tty_operations serial_ops = {
 	.open =			serial_open,
 	.close =		serial_close,
@@ -1204,6 +1207,17 @@ static const struct tty_operations serial_ops = {
 
 struct tty_driver *usb_serial_tty_driver;
 
+/* Driver structure we register with the USB core */
+static struct usb_driver usb_serial_driver = {
+	.name =		"usbserial",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.suspend =	usb_serial_suspend,
+	.resume =	usb_serial_resume,
+	.no_dynamic_id =	1,
+	.supports_autosuspend =	1,
+};
+
 static int __init usb_serial_init(void)
 {
 	int i;
@@ -1338,7 +1352,6 @@ static int usb_serial_register(struct usb_serial_driver *driver)
 				driver->description);
 		return -EINVAL;
 	}
-	driver->usb_driver->supports_autosuspend = 1;
 
 	/* Add this device to our list of devices */
 	mutex_lock(&table_lock);
@@ -1369,18 +1382,19 @@ static void usb_serial_deregister(struct usb_serial_driver *device)
 
 /**
  * usb_serial_register_drivers - register drivers for a usb-serial module
- * @udriver: usb_driver used for matching devices/interfaces
  * @serial_drivers: NULL-terminated array of pointers to drivers to be registered
+ * @name: name of the usb_driver for this set of @serial_drivers
+ * @id_table: list of all devices this @serial_drivers set binds to
  *
- * Registers @udriver and all the drivers in the @serial_drivers array.
- * Automatically fills in the .no_dynamic_id field in @udriver and
- * the .usb_driver field in each serial driver.
+ * Registers all the drivers in the @serial_drivers array, and dynamically
+ * creates a struct usb_driver with the name @name and id_table of @id_table.
  */
-int usb_serial_register_drivers(struct usb_driver *udriver,
-		struct usb_serial_driver * const serial_drivers[])
+int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
+				const char *name,
+				const struct usb_device_id *id_table)
 {
 	int rc;
-	const struct usb_device_id *saved_id_table;
+	struct usb_driver *udriver;
 	struct usb_serial_driver * const *sd;
 
 	/*
@@ -1391,12 +1405,30 @@ int usb_serial_register_drivers(struct usb_driver *udriver,
 	 * Performance hack: We don't want udriver to be probed until
 	 * the serial drivers are registered, because the probe would
 	 * simply fail for lack of a matching serial driver.
-	 * Therefore save off udriver's id_table until we are all set.
+	 * So we leave udriver's id_table set to NULL until we are all set.
+	 *
+	 * Suspend/resume support is implemented in the usb-serial core,
+	 * so fill in the PM-related fields in udriver.
 	 */
-	saved_id_table = udriver->id_table;
-	udriver->id_table = NULL;
+	udriver = kzalloc(sizeof(*udriver), GFP_KERNEL);
+	if (!udriver)
+		return -ENOMEM;
 
+	udriver->name = name;
 	udriver->no_dynamic_id = 1;
+	udriver->supports_autosuspend = 1;
+	udriver->suspend = usb_serial_suspend;
+	udriver->resume = usb_serial_resume;
+	udriver->probe = usb_serial_probe;
+	udriver->disconnect = usb_serial_disconnect;
+
+	/* we only set the reset_resume field if the serial_driver has one */
+	for (sd = serial_drivers; *sd; ++sd) {
+		if ((*sd)->reset_resume)
+			udriver->reset_resume = usb_serial_reset_resume;
+			break;
+	}
+
 	rc = usb_register(udriver);
 	if (rc)
 		return rc;
@@ -1408,8 +1440,8 @@ int usb_serial_register_drivers(struct usb_driver *udriver,
 			goto failed;
 	}
 
-	/* Now restore udriver's id_table and look for matches */
-	udriver->id_table = saved_id_table;
+	/* Now set udriver's id_table and look for matches */
+	udriver->id_table = id_table;
 	rc = driver_attach(&udriver->drvwrap.driver);
 	return 0;
 
@@ -1423,17 +1455,20 @@ EXPORT_SYMBOL_GPL(usb_serial_register_drivers);
 
 /**
  * usb_serial_deregister_drivers - deregister drivers for a usb-serial module
- * @udriver: usb_driver to unregister
  * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered
  *
- * Deregisters @udriver and all the drivers in the @serial_drivers array.
+ * Deregisters all the drivers in the @serial_drivers array and deregisters and
+ * frees the struct usb_driver that was created by the call to
+ * usb_serial_register_drivers().
  */
-void usb_serial_deregister_drivers(struct usb_driver *udriver,
-		struct usb_serial_driver * const serial_drivers[])
+void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[])
 {
+	struct usb_driver *udriver = (*serial_drivers)->usb_driver;
+
 	for (; *serial_drivers; ++serial_drivers)
 		usb_serial_deregister(*serial_drivers);
 	usb_deregister(udriver);
+	kfree(udriver);
 }
 EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
 
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index e3e8995a4739..5760f97ee508 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -35,13 +35,6 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver debug_driver = {
-	.name =		"debug",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 /* This HW really does not support a serial break, so one will be
  * emulated when ever the break state is set to true.
  */
@@ -83,5 +76,5 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&debug_device, NULL
 };
 
-module_usb_serial_driver(debug_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index c88657dd31c8..f35971dff4a5 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -43,11 +43,8 @@ void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct usb_serial *serial = port->serial;
 	struct usb_wwan_port_private *portdata;
-
 	struct usb_wwan_intf_private *intfdata;
 
-	dbg("%s", __func__);
-
 	intfdata = port->serial->private;
 
 	if (!intfdata->send_setup)
@@ -69,8 +66,6 @@ void usb_wwan_set_termios(struct tty_struct *tty,
 {
 	struct usb_wwan_intf_private *intfdata = port->serial->private;
 
-	dbg("%s", __func__);
-
 	/* Doesn't support option setting */
 	tty_termios_copy_hw(tty->termios, old_termios);
 
@@ -286,8 +281,6 @@ static void usb_wwan_indat_callback(struct urb *urb)
 	unsigned char *data = urb->transfer_buffer;
 	int status = urb->status;
 
-	dbg("%s: %p", __func__, urb);
-
 	endpoint = usb_pipeendpoint(urb->pipe);
 	port = urb->context;
 
@@ -307,20 +300,17 @@ static void usb_wwan_indat_callback(struct urb *urb)
 		}
 
 		/* Resubmit urb so we continue receiving */
-		if (status != -ESHUTDOWN) {
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err) {
-				if (err != -EPERM) {
-					printk(KERN_ERR "%s: resubmit read urb failed. "
-						"(%d)", __func__, err);
-					/* busy also in error unless we are killed */
-					usb_mark_last_busy(port->serial->dev);
-				}
-			} else {
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err) {
+			if (err != -EPERM) {
+				printk(KERN_ERR "%s: resubmit read urb failed. "
+					"(%d)", __func__, err);
+				/* busy also in error unless we are killed */
 				usb_mark_last_busy(port->serial->dev);
 			}
+		} else {
+			usb_mark_last_busy(port->serial->dev);
 		}
-
 	}
 }
 
@@ -331,8 +321,6 @@ static void usb_wwan_outdat_callback(struct urb *urb)
 	struct usb_wwan_intf_private *intfdata;
 	int i;
 
-	dbg("%s", __func__);
-
 	port = urb->context;
 	intfdata = port->serial->private;
 
@@ -406,8 +394,6 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
 	portdata = usb_get_serial_port_data(port);
 	intfdata = serial->private;
 
-	dbg("%s", __func__);
-
 	/* Start reading from the IN endpoint */
 	for (i = 0; i < N_IN_URB; i++) {
 		urb = portdata->in_urbs[i];
@@ -441,7 +427,6 @@ void usb_wwan_close(struct usb_serial_port *port)
 	struct usb_wwan_port_private *portdata;
 	struct usb_wwan_intf_private *intfdata = port->serial->private;
 
-	dbg("%s", __func__);
 	portdata = usb_get_serial_port_data(port);
 
 	if (serial->dev) {
@@ -492,8 +477,6 @@ static void usb_wwan_setup_urbs(struct usb_serial *serial)
 	struct usb_serial_port *port;
 	struct usb_wwan_port_private *portdata;
 
-	dbg("%s", __func__);
-
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
 		portdata = usb_get_serial_port_data(port);
@@ -534,8 +517,6 @@ int usb_wwan_startup(struct usb_serial *serial)
 	struct usb_wwan_port_private *portdata;
 	u8 *buffer;
 
-	dbg("%s", __func__);
-
 	/* Now setup per port private data */
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
@@ -603,8 +584,6 @@ static void stop_read_write_urbs(struct usb_serial *serial)
 
 void usb_wwan_disconnect(struct usb_serial *serial)
 {
-	dbg("%s", __func__);
-
 	stop_read_write_urbs(serial);
 }
 EXPORT_SYMBOL(usb_wwan_disconnect);
@@ -615,8 +594,6 @@ void usb_wwan_release(struct usb_serial *serial)
 	struct usb_serial_port *port;
 	struct usb_wwan_port_private *portdata;
 
-	dbg("%s", __func__);
-
 	/* Now free them */
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
@@ -649,8 +626,6 @@ int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
 	struct usb_wwan_intf_private *intfdata = serial->private;
 	int b;
 
-	dbg("%s entered", __func__);
-
 	if (PMSG_IS_AUTO(message)) {
 		spin_lock_irq(&intfdata->susp_lock);
 		b = intfdata->in_flight;
@@ -714,7 +689,6 @@ int usb_wwan_resume(struct usb_serial *serial)
 	struct urb *urb;
 	int err = 0;
 
-	dbg("%s entered", __func__);
 	/* get the interrupt URBs resubmitted unconditionally */
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
@@ -725,8 +699,8 @@ int usb_wwan_resume(struct usb_serial *serial)
 		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
 		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
 		if (err < 0) {
-			err("%s: Error %d for interrupt URB of port%d",
-			    __func__, err, i);
+			dev_err(&port->dev, "%s: Error %d for interrupt URB\n",
+				__func__, err);
 			goto err_out;
 		}
 	}
@@ -747,8 +721,8 @@ int usb_wwan_resume(struct usb_serial *serial)
 			urb = portdata->in_urbs[j];
 			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err < 0) {
-				err("%s: Error %d for bulk URB %d",
-				    __func__, err, i);
+				dev_err(&port->dev, "%s: Error %d for bulk URB %d\n",
+					__func__, err, i);
 				spin_unlock_irq(&intfdata->susp_lock);
 				goto err_out;
 			}
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 71d696474f24..f253c91383da 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -53,8 +53,6 @@ static int palm_os_4_probe(struct usb_serial *serial,
 
 /* Parameters that may be passed into the module. */
 static bool debug;
-static __u16 vendor;
-static __u16 product;
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID),
@@ -115,14 +113,12 @@ static struct usb_device_id id_table [] = {
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
-	{ },					/* optional parameter entry */
 	{ }					/* Terminating entry */
 };
 
 static struct usb_device_id clie_id_5_table [] = {
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
-	{ },					/* optional parameter entry */
 	{ }					/* Terminating entry */
 };
 
@@ -162,19 +158,11 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID) },
 	{ USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID) },
-	{ },					/* optional parameter entry */
 	{ }					/* Terminating entry */
 };
 
 MODULE_DEVICE_TABLE(usb, id_table_combined);
 
-static struct usb_driver visor_driver = {
-	.name =		"visor",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-};
-
 /* All of the device info needed for the Handspring Visor,
    and Palm 4.0 devices */
 static struct usb_serial_driver handspring_device = {
@@ -244,8 +232,6 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (!port->read_urb) {
 		/* this is needed for some brain dead Sony devices */
 		dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n");
@@ -258,7 +244,7 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
 		goto exit;
 
 	if (port->interrupt_in_urb) {
-		dbg("%s - adding interrupt input for treo", __func__);
+		dev_dbg(&port->dev, "adding interrupt input for treo\n");
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (result)
 			dev_err(&port->dev,
@@ -274,8 +260,6 @@ static void visor_close(struct usb_serial_port *port)
 {
 	unsigned char *transfer_buffer;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	/* shutdown our urbs */
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
@@ -310,12 +294,12 @@ static void visor_read_int_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
 		goto exit;
 	}
 
@@ -348,8 +332,6 @@ static int palm_os_3_probe(struct usb_serial *serial,
 	int i;
 	int num_ports = 0;
 
-	dbg("%s", __func__);
-
 	transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
 	if (!transfer_buffer) {
 		dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
@@ -445,8 +427,6 @@ static int palm_os_4_probe(struct usb_serial *serial,
 	unsigned char *transfer_buffer;
 	int retval;
 
-	dbg("%s", __func__);
-
 	transfer_buffer =  kmalloc(sizeof(*connection_info), GFP_KERNEL);
 	if (!transfer_buffer) {
 		dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
@@ -478,8 +458,6 @@ static int visor_probe(struct usb_serial *serial,
 	int (*startup)(struct usb_serial *serial,
 					const struct usb_device_id *id);
 
-	dbg("%s", __func__);
-
 	/*
 	 * some Samsung Android phones in modem mode have the same ID
 	 * as SPH-I500, but they are ACM devices, so dont bind to them
@@ -521,8 +499,6 @@ static int clie_3_5_startup(struct usb_serial *serial)
 	int result;
 	u8 *data;
 
-	dbg("%s", __func__);
-
 	data = kmalloc(1, GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -585,8 +561,6 @@ static int treo_attach(struct usb_serial *serial)
 		(serial->num_interrupt_in == 0))
 		return 0;
 
-	dbg("%s", __func__);
-
 	/*
 	* It appears that Treos and Kyoceras want to use the
 	* 1st bulk in endpoint to communicate with the 2nd bulk out endpoint,
@@ -622,8 +596,6 @@ static int clie_5_attach(struct usb_serial *serial)
 	unsigned int pipe;
 	int j;
 
-	dbg("%s", __func__);
-
 	/* TH55 registers 2 ports.
 	   Communication in from the UX50/TH55 uses bulk_in_endpointAddress
 	   from port 0. Communication out to the UX50/TH55 uses
@@ -648,59 +620,7 @@ static int clie_5_attach(struct usb_serial *serial)
 	return 0;
 }
 
-static int __init visor_init(void)
-{
-	int i, retval;
-	/* Only if parameters were passed to us */
-	if (vendor > 0 && product > 0) {
-		struct usb_device_id usb_dev_temp[] = {
-			{
-				USB_DEVICE(vendor, product),
-				.driver_info =
-					(kernel_ulong_t) &palm_os_4_probe
-			}
-		};
-
-		/* Find the last entry in id_table */
-		for (i = 0;; i++) {
-			if (id_table[i].idVendor == 0) {
-				id_table[i] = usb_dev_temp[0];
-				break;
-			}
-		}
-		/* Find the last entry in id_table_combined */
-		for (i = 0;; i++) {
-			if (id_table_combined[i].idVendor == 0) {
-				id_table_combined[i] = usb_dev_temp[0];
-				break;
-			}
-		}
-		printk(KERN_INFO KBUILD_MODNAME
-		       ": Untested USB device specified at time of module insertion\n");
-		printk(KERN_INFO KBUILD_MODNAME
-		       ": Warning: This is not guaranteed to work\n");
-		printk(KERN_INFO KBUILD_MODNAME
-		       ": Using a newer kernel is preferred to this method\n");
-		printk(KERN_INFO KBUILD_MODNAME
-		       ": Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x\n",
-			vendor, product);
-	}
-
-	retval = usb_serial_register_drivers(&visor_driver, serial_drivers);
-	if (retval == 0)
-		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
-	return retval;
-}
-
-
-static void __exit visor_exit (void)
-{
-	usb_serial_deregister_drivers(&visor_driver, serial_drivers);
-}
-
-
-module_init(visor_init);
-module_exit(visor_exit);
+module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -708,9 +628,3 @@ MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-module_param(vendor, ushort, 0);
-MODULE_PARM_DESC(vendor, "User specified vendor ID");
-module_param(product, ushort, 0);
-MODULE_PARM_DESC(product, "User specified product ID");
-
diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c
index 078f338b5feb..0c0aa876c209 100644
--- a/drivers/usb/serial/vivopay-serial.c
+++ b/drivers/usb/serial/vivopay-serial.c
@@ -25,13 +25,6 @@ static struct usb_device_id id_table [] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver vivopay_serial_driver = {
-	.name =			"vivopay-serial",
-	.probe =		usb_serial_probe,
-	.disconnect =		usb_serial_disconnect,
-	.id_table =		id_table,
-};
-
 static struct usb_serial_driver vivopay_serial_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -45,7 +38,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&vivopay_serial_device, NULL
 };
 
-module_usb_serial_driver(vivopay_serial_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>");
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 407e23c87946..473635e7f5db 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -45,7 +45,6 @@ static bool debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v2.0"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
 
@@ -78,12 +77,6 @@ static const struct usb_device_id id_table_combined[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table_combined);
 
-static struct usb_driver whiteheat_driver = {
-	.name =		"whiteheat",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table_combined,
-};
 
 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
 static int  whiteheat_firmware_download(struct usb_serial *serial,
@@ -96,10 +89,6 @@ static void whiteheat_release(struct usb_serial *serial);
 static int  whiteheat_open(struct tty_struct *tty,
 			struct usb_serial_port *port);
 static void whiteheat_close(struct usb_serial_port *port);
-static int  whiteheat_write(struct tty_struct *tty,
-			struct usb_serial_port *port,
-			const unsigned char *buf, int count);
-static int  whiteheat_write_room(struct tty_struct *tty);
 static int  whiteheat_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg);
 static void whiteheat_set_termios(struct tty_struct *tty,
@@ -108,11 +97,6 @@ static int  whiteheat_tiocmget(struct tty_struct *tty);
 static int  whiteheat_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear);
 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
-static int  whiteheat_chars_in_buffer(struct tty_struct *tty);
-static void whiteheat_throttle(struct tty_struct *tty);
-static void whiteheat_unthrottle(struct tty_struct *tty);
-static void whiteheat_read_callback(struct urb *urb);
-static void whiteheat_write_callback(struct urb *urb);
 
 static struct usb_serial_driver whiteheat_fake_device = {
 	.driver = {
@@ -138,18 +122,13 @@ static struct usb_serial_driver whiteheat_device = {
 	.release =		whiteheat_release,
 	.open =			whiteheat_open,
 	.close =		whiteheat_close,
-	.write =		whiteheat_write,
-	.write_room =		whiteheat_write_room,
 	.ioctl =		whiteheat_ioctl,
 	.set_termios =		whiteheat_set_termios,
 	.break_ctl =		whiteheat_break_ctl,
 	.tiocmget =		whiteheat_tiocmget,
 	.tiocmset =		whiteheat_tiocmset,
-	.chars_in_buffer =	whiteheat_chars_in_buffer,
-	.throttle =		whiteheat_throttle,
-	.unthrottle =		whiteheat_unthrottle,
-	.read_bulk_callback =	whiteheat_read_callback,
-	.write_bulk_callback =	whiteheat_write_callback,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {
@@ -166,29 +145,8 @@ struct whiteheat_command_private {
 	__u8			result_buffer[64];
 };
 
-
-#define THROTTLED		0x01
-#define ACTUALLY_THROTTLED	0x02
-
-static int urb_pool_size = 8;
-
-struct whiteheat_urb_wrap {
-	struct list_head	list;
-	struct urb		*urb;
-};
-
 struct whiteheat_private {
-	spinlock_t		lock;
-	__u8			flags;
 	__u8			mcr;		/* FIXME: no locking on mcr */
-	struct list_head	rx_urbs_free;
-	struct list_head	rx_urbs_submitted;
-	struct list_head	rx_urb_q;
-	struct work_struct	rx_work;
-	struct usb_serial_port	*port;
-	struct list_head	tx_urbs_free;
-	struct list_head	tx_urbs_submitted;
-	struct mutex		deathwarrant;
 };
 
 
@@ -198,12 +156,6 @@ static void stop_command_port(struct usb_serial *serial);
 static void command_port_write_callback(struct urb *urb);
 static void command_port_read_callback(struct urb *urb);
 
-static int start_port_read(struct usb_serial_port *port);
-static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb,
-						struct list_head *head);
-static struct list_head *list_first(struct list_head *head);
-static void rx_data_softint(struct work_struct *work);
-
 static int firm_send_command(struct usb_serial_port *port, __u8 command,
 						__u8 *data, __u8 datasize);
 static int firm_open(struct usb_serial_port *port);
@@ -247,8 +199,6 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
 	const struct firmware *loader_fw = NULL, *firmware_fw = NULL;
 	const struct ihex_binrec *record;
 
-	dbg("%s", __func__);
-
 	if (request_ihex_firmware(&firmware_fw, "whiteheat.fw",
 				  &serial->dev->dev)) {
 		dev_err(&serial->dev->dev,
@@ -349,11 +299,6 @@ static int whiteheat_attach(struct usb_serial *serial)
 	__u8 *command;
 	__u8 *result;
 	int i;
-	int j;
-	struct urb *urb;
-	int buf_size;
-	struct whiteheat_urb_wrap *wrap;
-	struct list_head *tmp;
 
 	command_port = serial->port[COMMAND_PORT];
 
@@ -408,8 +353,8 @@ static int whiteheat_attach(struct usb_serial *serial)
 
 	hw_info = (struct whiteheat_hw_info *)&result[1];
 
-	dev_info(&serial->dev->dev, "%s: Driver %s: Firmware v%d.%02d\n",
-		 serial->type->description, DRIVER_VERSION,
+	dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n",
+		 serial->type->description,
 		 hw_info->sw_major_rev, hw_info->sw_minor_rev);
 
 	for (i = 0; i < serial->num_ports; i++) {
@@ -423,72 +368,7 @@ static int whiteheat_attach(struct usb_serial *serial)
 			goto no_private;
 		}
 
-		spin_lock_init(&info->lock);
-		mutex_init(&info->deathwarrant);
-		info->flags = 0;
 		info->mcr = 0;
-		INIT_WORK(&info->rx_work, rx_data_softint);
-		info->port = port;
-
-		INIT_LIST_HEAD(&info->rx_urbs_free);
-		INIT_LIST_HEAD(&info->rx_urbs_submitted);
-		INIT_LIST_HEAD(&info->rx_urb_q);
-		INIT_LIST_HEAD(&info->tx_urbs_free);
-		INIT_LIST_HEAD(&info->tx_urbs_submitted);
-
-		for (j = 0; j < urb_pool_size; j++) {
-			urb = usb_alloc_urb(0, GFP_KERNEL);
-			if (!urb) {
-				dev_err(&port->dev, "No free urbs available\n");
-				goto no_rx_urb;
-			}
-			buf_size = port->read_urb->transfer_buffer_length;
-			urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
-			if (!urb->transfer_buffer) {
-				dev_err(&port->dev,
-					"Couldn't allocate urb buffer\n");
-				goto no_rx_buf;
-			}
-			wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
-			if (!wrap) {
-				dev_err(&port->dev,
-					"Couldn't allocate urb wrapper\n");
-				goto no_rx_wrap;
-			}
-			usb_fill_bulk_urb(urb, serial->dev,
-					usb_rcvbulkpipe(serial->dev,
-						port->bulk_in_endpointAddress),
-					urb->transfer_buffer, buf_size,
-					whiteheat_read_callback, port);
-			wrap->urb = urb;
-			list_add(&wrap->list, &info->rx_urbs_free);
-
-			urb = usb_alloc_urb(0, GFP_KERNEL);
-			if (!urb) {
-				dev_err(&port->dev, "No free urbs available\n");
-				goto no_tx_urb;
-			}
-			buf_size = port->write_urb->transfer_buffer_length;
-			urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
-			if (!urb->transfer_buffer) {
-				dev_err(&port->dev,
-					"Couldn't allocate urb buffer\n");
-				goto no_tx_buf;
-			}
-			wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
-			if (!wrap) {
-				dev_err(&port->dev,
-					"Couldn't allocate urb wrapper\n");
-				goto no_tx_wrap;
-			}
-			usb_fill_bulk_urb(urb, serial->dev,
-					usb_sndbulkpipe(serial->dev,
-						port->bulk_out_endpointAddress),
-					urb->transfer_buffer, buf_size,
-					whiteheat_write_callback, port);
-			wrap->urb = urb;
-			list_add(&wrap->list, &info->tx_urbs_free);
-		}
 
 		usb_set_serial_port_data(port, info);
 	}
@@ -531,29 +411,6 @@ no_command_private:
 	for (i = serial->num_ports - 1; i >= 0; i--) {
 		port = serial->port[i];
 		info = usb_get_serial_port_data(port);
-		for (j = urb_pool_size - 1; j >= 0; j--) {
-			tmp = list_first(&info->tx_urbs_free);
-			list_del(tmp);
-			wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-			urb = wrap->urb;
-			kfree(wrap);
-no_tx_wrap:
-			kfree(urb->transfer_buffer);
-no_tx_buf:
-			usb_free_urb(urb);
-no_tx_urb:
-			tmp = list_first(&info->rx_urbs_free);
-			list_del(tmp);
-			wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-			urb = wrap->urb;
-			kfree(wrap);
-no_rx_wrap:
-			kfree(urb->transfer_buffer);
-no_rx_buf:
-			usb_free_urb(urb);
-no_rx_urb:
-			;
-		}
 		kfree(info);
 no_private:
 		;
@@ -569,56 +426,27 @@ no_command_buffer:
 static void whiteheat_release(struct usb_serial *serial)
 {
 	struct usb_serial_port *command_port;
-	struct usb_serial_port *port;
 	struct whiteheat_private *info;
-	struct whiteheat_urb_wrap *wrap;
-	struct urb *urb;
-	struct list_head *tmp;
-	struct list_head *tmp2;
 	int i;
 
-	dbg("%s", __func__);
-
 	/* free up our private data for our command port */
 	command_port = serial->port[COMMAND_PORT];
 	kfree(usb_get_serial_port_data(command_port));
 
 	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		info = usb_get_serial_port_data(port);
-		list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
-			list_del(tmp);
-			wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-			urb = wrap->urb;
-			kfree(wrap);
-			kfree(urb->transfer_buffer);
-			usb_free_urb(urb);
-		}
-		list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) {
-			list_del(tmp);
-			wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-			urb = wrap->urb;
-			kfree(wrap);
-			kfree(urb->transfer_buffer);
-			usb_free_urb(urb);
-		}
+		info = usb_get_serial_port_data(serial->port[i]);
 		kfree(info);
 	}
 }
 
 static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	int		retval = 0;
-
-	dbg("%s - port %d", __func__, port->number);
+	int retval;
 
 	retval = start_command_port(port->serial);
 	if (retval)
 		goto exit;
 
-	if (tty)
-		tty->low_latency = 1;
-
 	/* send an open port command */
 	retval = firm_open(port);
 	if (retval) {
@@ -640,144 +468,25 @@ static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_clear_halt(port->serial->dev, port->read_urb->pipe);
 	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 
-	/* Start reading from the device */
-	retval = start_port_read(port);
+	retval = usb_serial_generic_open(tty, port);
 	if (retval) {
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, retval);
 		firm_close(port);
 		stop_command_port(port->serial);
 		goto exit;
 	}
-
 exit:
-	dbg("%s - exit, retval = %d", __func__, retval);
 	return retval;
 }
 
 
 static void whiteheat_close(struct usb_serial_port *port)
 {
-	struct whiteheat_private *info = usb_get_serial_port_data(port);
-	struct whiteheat_urb_wrap *wrap;
-	struct urb *urb;
-	struct list_head *tmp;
-	struct list_head *tmp2;
-
-	dbg("%s - port %d", __func__, port->number);
-
 	firm_report_tx_done(port);
 	firm_close(port);
 
-	/* shutdown our bulk reads and writes */
-	mutex_lock(&info->deathwarrant);
-	spin_lock_irq(&info->lock);
-	list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
-		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-		urb = wrap->urb;
-		list_del(tmp);
-		spin_unlock_irq(&info->lock);
-		usb_kill_urb(urb);
-		spin_lock_irq(&info->lock);
-		list_add(tmp, &info->rx_urbs_free);
-	}
-	list_for_each_safe(tmp, tmp2, &info->rx_urb_q)
-		list_move(tmp, &info->rx_urbs_free);
-	list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) {
-		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-		urb = wrap->urb;
-		list_del(tmp);
-		spin_unlock_irq(&info->lock);
-		usb_kill_urb(urb);
-		spin_lock_irq(&info->lock);
-		list_add(tmp, &info->tx_urbs_free);
-	}
-	spin_unlock_irq(&info->lock);
-	mutex_unlock(&info->deathwarrant);
-	stop_command_port(port->serial);
-}
-
-
-static int whiteheat_write(struct tty_struct *tty,
-	struct usb_serial_port *port, const unsigned char *buf, int count)
-{
-	struct whiteheat_private *info = usb_get_serial_port_data(port);
-	struct whiteheat_urb_wrap *wrap;
-	struct urb *urb;
-	int result;
-	int bytes;
-	int sent = 0;
-	unsigned long flags;
-	struct list_head *tmp;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (count == 0) {
-		dbg("%s - write request of 0 bytes", __func__);
-		return (0);
-	}
-
-	while (count) {
-		spin_lock_irqsave(&info->lock, flags);
-		if (list_empty(&info->tx_urbs_free)) {
-			spin_unlock_irqrestore(&info->lock, flags);
-			break;
-		}
-		tmp = list_first(&info->tx_urbs_free);
-		list_del(tmp);
-		spin_unlock_irqrestore(&info->lock, flags);
-
-		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-		urb = wrap->urb;
-		bytes = (count > port->bulk_out_size) ?
-					port->bulk_out_size : count;
-		memcpy(urb->transfer_buffer, buf + sent, bytes);
-
-		usb_serial_debug_data(debug, &port->dev,
-				__func__, bytes, urb->transfer_buffer);
-
-		urb->transfer_buffer_length = bytes;
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-		if (result) {
-			dev_err_console(port,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, result);
-			sent = result;
-			spin_lock_irqsave(&info->lock, flags);
-			list_add(tmp, &info->tx_urbs_free);
-			spin_unlock_irqrestore(&info->lock, flags);
-			break;
-		} else {
-			sent += bytes;
-			count -= bytes;
-			spin_lock_irqsave(&info->lock, flags);
-			list_add(tmp, &info->tx_urbs_submitted);
-			spin_unlock_irqrestore(&info->lock, flags);
-		}
-	}
-
-	return sent;
-}
-
-static int whiteheat_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct whiteheat_private *info = usb_get_serial_port_data(port);
-	struct list_head *tmp;
-	int room = 0;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
+	usb_serial_generic_close(port);
 
-	spin_lock_irqsave(&info->lock, flags);
-	list_for_each(tmp, &info->tx_urbs_free)
-		room++;
-	spin_unlock_irqrestore(&info->lock, flags);
-	room *= port->bulk_out_size;
-
-	dbg("%s - returns %d", __func__, room);
-	return (room);
+	stop_command_port(port->serial);
 }
 
 static int whiteheat_tiocmget(struct tty_struct *tty)
@@ -786,8 +495,6 @@ static int whiteheat_tiocmget(struct tty_struct *tty)
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	unsigned int modem_signals = 0;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	firm_get_dtr_rts(port);
 	if (info->mcr & UART_MCR_DTR)
 		modem_signals |= TIOCM_DTR;
@@ -803,8 +510,6 @@ static int whiteheat_tiocmset(struct tty_struct *tty,
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (set & TIOCM_RTS)
 		info->mcr |= UART_MCR_RTS;
 	if (set & TIOCM_DTR)
@@ -837,7 +542,7 @@ static int whiteheat_ioctl(struct tty_struct *tty,
 		serstruct.line = port->serial->minor;
 		serstruct.port = port->number;
 		serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
-		serstruct.xmit_fifo_size = port->bulk_out_size;
+		serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo);
 		serstruct.custom_divisor = 0;
 		serstruct.baud_base = 460800;
 		serstruct.close_delay = CLOSING_DELAY;
@@ -867,60 +572,6 @@ static void whiteheat_break_ctl(struct tty_struct *tty, int break_state)
 }
 
 
-static int whiteheat_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct whiteheat_private *info = usb_get_serial_port_data(port);
-	struct list_head *tmp;
-	struct whiteheat_urb_wrap *wrap;
-	int chars = 0;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&info->lock, flags);
-	list_for_each(tmp, &info->tx_urbs_submitted) {
-		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-		chars += wrap->urb->transfer_buffer_length;
-	}
-	spin_unlock_irqrestore(&info->lock, flags);
-
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
-}
-
-
-static void whiteheat_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct whiteheat_private *info = usb_get_serial_port_data(port);
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irq(&info->lock);
-	info->flags |= THROTTLED;
-	spin_unlock_irq(&info->lock);
-}
-
-
-static void whiteheat_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct whiteheat_private *info = usb_get_serial_port_data(port);
-	int actually_throttled;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irq(&info->lock);
-	actually_throttled = info->flags & ACTUALLY_THROTTLED;
-	info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irq(&info->lock);
-
-	if (actually_throttled)
-		rx_data_softint(&info->rx_work);
-}
-
-
 /*****************************************************************************
  * Connect Tech's White Heat callback routines
  *****************************************************************************/
@@ -928,8 +579,6 @@ static void command_port_write_callback(struct urb *urb)
 {
 	int status = urb->status;
 
-	dbg("%s", __func__);
-
 	if (status) {
 		dbg("nonzero urb status: %d", status);
 		return;
@@ -945,8 +594,6 @@ static void command_port_read_callback(struct urb *urb)
 	unsigned char *data = urb->transfer_buffer;
 	int result;
 
-	dbg("%s", __func__);
-
 	command_info = usb_get_serial_port_data(command_port);
 	if (!command_info) {
 		dbg("%s - command_info is NULL, exiting.", __func__);
@@ -989,80 +636,6 @@ static void command_port_read_callback(struct urb *urb)
 }
 
 
-static void whiteheat_read_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct whiteheat_urb_wrap *wrap;
-	unsigned char *data = urb->transfer_buffer;
-	struct whiteheat_private *info = usb_get_serial_port_data(port);
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock(&info->lock);
-	wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
-	if (!wrap) {
-		spin_unlock(&info->lock);
-		dev_err(&port->dev, "%s - Not my urb!\n", __func__);
-		return;
-	}
-	list_del(&wrap->list);
-	spin_unlock(&info->lock);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		spin_lock(&info->lock);
-		list_add(&wrap->list, &info->rx_urbs_free);
-		spin_unlock(&info->lock);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev,
-				__func__, urb->actual_length, data);
-
-	spin_lock(&info->lock);
-	list_add_tail(&wrap->list, &info->rx_urb_q);
-	if (info->flags & THROTTLED) {
-		info->flags |= ACTUALLY_THROTTLED;
-		spin_unlock(&info->lock);
-		return;
-	}
-	spin_unlock(&info->lock);
-
-	schedule_work(&info->rx_work);
-}
-
-
-static void whiteheat_write_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct whiteheat_private *info = usb_get_serial_port_data(port);
-	struct whiteheat_urb_wrap *wrap;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock(&info->lock);
-	wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
-	if (!wrap) {
-		spin_unlock(&info->lock);
-		dev_err(&port->dev, "%s - Not my urb!\n", __func__);
-		return;
-	}
-	list_move(&wrap->list, &info->tx_urbs_free);
-	spin_unlock(&info->lock);
-
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_port_softint(port);
-}
-
-
 /*****************************************************************************
  * Connect Tech's White Heat firmware interface
  *****************************************************************************/
@@ -1337,124 +910,7 @@ static void stop_command_port(struct usb_serial *serial)
 	mutex_unlock(&command_info->mutex);
 }
 
-
-static int start_port_read(struct usb_serial_port *port)
-{
-	struct whiteheat_private *info = usb_get_serial_port_data(port);
-	struct whiteheat_urb_wrap *wrap;
-	struct urb *urb;
-	int retval = 0;
-	unsigned long flags;
-	struct list_head *tmp;
-	struct list_head *tmp2;
-
-	spin_lock_irqsave(&info->lock, flags);
-
-	list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
-		list_del(tmp);
-		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-		urb = wrap->urb;
-		spin_unlock_irqrestore(&info->lock, flags);
-		retval = usb_submit_urb(urb, GFP_KERNEL);
-		if (retval) {
-			spin_lock_irqsave(&info->lock, flags);
-			list_add(tmp, &info->rx_urbs_free);
-			list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
-				wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-				urb = wrap->urb;
-				list_del(tmp);
-				spin_unlock_irqrestore(&info->lock, flags);
-				usb_kill_urb(urb);
-				spin_lock_irqsave(&info->lock, flags);
-				list_add(tmp, &info->rx_urbs_free);
-			}
-			break;
-		}
-		spin_lock_irqsave(&info->lock, flags);
-		list_add(tmp, &info->rx_urbs_submitted);
-	}
-
-	spin_unlock_irqrestore(&info->lock, flags);
-
-	return retval;
-}
-
-
-static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb,
-						struct list_head *head)
-{
-	struct whiteheat_urb_wrap *wrap;
-	struct list_head *tmp;
-
-	list_for_each(tmp, head) {
-		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-		if (wrap->urb == urb)
-			return wrap;
-	}
-
-	return NULL;
-}
-
-
-static struct list_head *list_first(struct list_head *head)
-{
-	return head->next;
-}
-
-
-static void rx_data_softint(struct work_struct *work)
-{
-	struct whiteheat_private *info =
-		container_of(work, struct whiteheat_private, rx_work);
-	struct usb_serial_port *port = info->port;
-	struct tty_struct *tty = tty_port_tty_get(&port->port);
-	struct whiteheat_urb_wrap *wrap;
-	struct urb *urb;
-	unsigned long flags;
-	struct list_head *tmp;
-	struct list_head *tmp2;
-	int result;
-	int sent = 0;
-
-	spin_lock_irqsave(&info->lock, flags);
-	if (info->flags & THROTTLED) {
-		spin_unlock_irqrestore(&info->lock, flags);
-		goto out;
-	}
-
-	list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
-		list_del(tmp);
-		spin_unlock_irqrestore(&info->lock, flags);
-
-		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
-		urb = wrap->urb;
-
-		if (tty && urb->actual_length)
-			sent += tty_insert_flip_string(tty,
-				urb->transfer_buffer, urb->actual_length);
-
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-		if (result) {
-			dev_err(&port->dev,
-				"%s - failed resubmitting read urb, error %d\n",
-				__func__, result);
-			spin_lock_irqsave(&info->lock, flags);
-			list_add(tmp, &info->rx_urbs_free);
-			continue;
-		}
-
-		spin_lock_irqsave(&info->lock, flags);
-		list_add(tmp, &info->rx_urbs_submitted);
-	}
-	spin_unlock_irqrestore(&info->lock, flags);
-
-	if (sent)
-		tty_flip_buffer_push(tty);
-out:
-	tty_kref_put(tty);
-}
-
-module_usb_serial_driver(whiteheat_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table_combined);
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
@@ -1463,8 +919,5 @@ MODULE_LICENSE("GPL");
 MODULE_FIRMWARE("whiteheat.fw");
 MODULE_FIRMWARE("whiteheat_loader.fw");
 
-module_param(urb_pool_size, int, 0);
-MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering");
-
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/serial/zio.c b/drivers/usb/serial/zio.c
index 9d0bb3752cd4..c043aa84a0ba 100644
--- a/drivers/usb/serial/zio.c
+++ b/drivers/usb/serial/zio.c
@@ -22,13 +22,6 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver zio_driver = {
-	.name =		"zio",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
 static struct usb_serial_driver zio_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -42,5 +35,5 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&zio_device, NULL
 };
 
-module_usb_serial_driver(zio_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index e7e678109500..b28f2ad127d4 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -1933,11 +1933,7 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag)
 	kfree(buf);
 
 nofw:
-	if (sd_fw != NULL) {
-		release_firmware(sd_fw);
-		sd_fw = NULL;
-	}
-
+	release_firmware(sd_fw);
 	return result;
 }
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 856ad92c40de..1719886bb9be 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -110,7 +110,7 @@ UNUSUAL_DEV(  0x040d, 0x6205, 0x0003, 0x0003,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
+/* Deduced by Jonathan Woithe <jwoithe@just42.net>
  * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
  * always fails and confuses drive.
  */
@@ -1885,6 +1885,13 @@ UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Jesse Feddema <jdfeddema@gmail.com> */
+UNUSUAL_DEV(  0x177f, 0x0400, 0x0000, 0x0000,
+		"Yarvik",
+		"PMP400",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
 /* Reported by Hans de Goede <hdegoede@redhat.com>
  * These Appotech controllers are found in Picture Frames, they provide a
  * (buggy) emulation of a cdrom drive which contains the windows software
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 2653e73db623..e23c30ab66da 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -121,7 +121,7 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
 }
 
 static struct us_unusual_dev us_unusual_dev_list[] = {
-#	include "unusual_devs.h" 
+#	include "unusual_devs.h"
 	{ }		/* Terminating entry */
 };
 
@@ -261,17 +261,17 @@ EXPORT_SYMBOL_GPL(usb_stor_post_reset);
 void fill_inquiry_response(struct us_data *us, unsigned char *data,
 		unsigned int data_len)
 {
-	if (data_len<36) // You lose.
+	if (data_len < 36) /* You lose. */
 		return;
 
 	memset(data+8, ' ', 28);
-	if(data[0]&0x20) { /* USB device currently not connected. Return
+	if (data[0]&0x20) { /* USB device currently not connected. Return
 			      peripheral qualifier 001b ("...however, the
 			      physical device is not currently connected
 			      to this logical unit") and leave vendor and
 			      product identification empty. ("If the target
 			      does store some of the INQUIRY data on the
-			      device, it may return zeros or ASCII spaces 
+			      device, it may return zeros or ASCII spaces
 			      (20h) in those fields until the data is
 			      available from the device."). */
 	} else {
@@ -298,7 +298,7 @@ static int usb_stor_control_thread(void * __us)
 	struct us_data *us = (struct us_data *)__us;
 	struct Scsi_Host *host = us_to_host(us);
 
-	for(;;) {
+	for (;;) {
 		US_DEBUGP("*** thread sleeping.\n");
 		if (wait_for_completion_interruptible(&us->cmnd_ready))
 			break;
@@ -327,7 +327,7 @@ static int usb_stor_control_thread(void * __us)
 
 		scsi_unlock(host);
 
-		/* reject the command if the direction indicator 
+		/* reject the command if the direction indicator
 		 * is UNKNOWN
 		 */
 		if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
@@ -338,7 +338,7 @@ static int usb_stor_control_thread(void * __us)
 		/* reject if target != 0 or if LUN is higher than
 		 * the maximum known LUN
 		 */
-		else if (us->srb->device->id && 
+		else if (us->srb->device->id &&
 				!(us->fflags & US_FL_SCM_MULT_TARG)) {
 			US_DEBUGP("Bad target number (%d:%d)\n",
 				  us->srb->device->id, us->srb->device->lun);
@@ -351,7 +351,7 @@ static int usb_stor_control_thread(void * __us)
 			us->srb->result = DID_BAD_TARGET << 16;
 		}
 
-		/* Handle those devices which need us to fake 
+		/* Handle those devices which need us to fake
 		 * their inquiry data */
 		else if ((us->srb->cmnd[0] == INQUIRY) &&
 			    (us->fflags & US_FL_FIX_INQUIRY)) {
@@ -376,7 +376,7 @@ static int usb_stor_control_thread(void * __us)
 
 		/* indicate that the command is done */
 		if (us->srb->result != DID_ABORT << 16) {
-			US_DEBUGP("scsi cmd done, result=0x%x\n", 
+			US_DEBUGP("scsi cmd done, result=0x%x\n",
 				   us->srb->result);
 			us->srb->scsi_done(us->srb);
 		} else {
@@ -414,7 +414,7 @@ SkipForAbort:
 	}
 	__set_current_state(TASK_RUNNING);
 	return 0;
-}	
+}
 
 /***********************************************************************
  * Device probing and disconnecting
@@ -732,7 +732,7 @@ static int get_pipes(struct us_data *us)
 	us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
 	us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
 		usb_endpoint_num(ep_out));
-	us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, 
+	us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
 		usb_endpoint_num(ep_in));
 	if (ep_int) {
 		us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index b4a71679c933..0616f235bd6b 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -93,8 +93,8 @@ static int skel_open(struct inode *inode, struct file *file)
 
 	interface = usb_find_interface(&skel_driver, subminor);
 	if (!interface) {
-		err("%s - error, can't find device for minor %d",
-		     __func__, subminor);
+		pr_err("%s - error, can't find device for minor %d\n",
+			__func__, subminor);
 		retval = -ENODEV;
 		goto exit;
 	}
@@ -179,8 +179,9 @@ static void skel_read_bulk_callback(struct urb *urb)
 		if (!(urb->status == -ENOENT ||
 		    urb->status == -ECONNRESET ||
 		    urb->status == -ESHUTDOWN))
-			err("%s - nonzero write bulk status received: %d",
-			    __func__, urb->status);
+			dev_err(&dev->interface->dev,
+				"%s - nonzero write bulk status received: %d\n",
+				__func__, urb->status);
 
 		dev->errors = urb->status;
 	} else {
@@ -213,7 +214,8 @@ static int skel_do_read_io(struct usb_skel *dev, size_t count)
 	/* do it */
 	rv = usb_submit_urb(dev->bulk_in_urb, GFP_KERNEL);
 	if (rv < 0) {
-		err("%s - failed submitting read urb, error %d",
+		dev_err(&dev->interface->dev,
+			"%s - failed submitting read urb, error %d\n",
 			__func__, rv);
 		dev->bulk_in_filled = 0;
 		rv = (rv == -ENOMEM) ? rv : -EIO;
@@ -364,8 +366,9 @@ static void skel_write_bulk_callback(struct urb *urb)
 		if (!(urb->status == -ENOENT ||
 		    urb->status == -ECONNRESET ||
 		    urb->status == -ESHUTDOWN))
-			err("%s - nonzero write bulk status received: %d",
-			    __func__, urb->status);
+			dev_err(&dev->interface->dev,
+				"%s - nonzero write bulk status received: %d\n",
+				__func__, urb->status);
 
 		spin_lock(&dev->err_lock);
 		dev->errors = urb->status;
@@ -459,8 +462,9 @@ static ssize_t skel_write(struct file *file, const char *user_buffer,
 	retval = usb_submit_urb(urb, GFP_KERNEL);
 	mutex_unlock(&dev->io_mutex);
 	if (retval) {
-		err("%s - failed submitting write urb, error %d", __func__,
-		    retval);
+		dev_err(&dev->interface->dev,
+			"%s - failed submitting write urb, error %d\n",
+			__func__, retval);
 		goto error_unanchor;
 	}
 
@@ -519,7 +523,7 @@ static int skel_probe(struct usb_interface *interface,
 	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (!dev) {
-		err("Out of memory");
+		dev_err(&interface->dev, "Out of memory\n");
 		goto error;
 	}
 	kref_init(&dev->kref);
@@ -546,12 +550,14 @@ static int skel_probe(struct usb_interface *interface,
 			dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
 			dev->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
 			if (!dev->bulk_in_buffer) {
-				err("Could not allocate bulk_in_buffer");
+				dev_err(&interface->dev,
+					"Could not allocate bulk_in_buffer\n");
 				goto error;
 			}
 			dev->bulk_in_urb = usb_alloc_urb(0, GFP_KERNEL);
 			if (!dev->bulk_in_urb) {
-				err("Could not allocate bulk_in_urb");
+				dev_err(&interface->dev,
+					"Could not allocate bulk_in_urb\n");
 				goto error;
 			}
 		}
@@ -563,7 +569,8 @@ static int skel_probe(struct usb_interface *interface,
 		}
 	}
 	if (!(dev->bulk_in_endpointAddr && dev->bulk_out_endpointAddr)) {
-		err("Could not find both bulk-in and bulk-out endpoints");
+		dev_err(&interface->dev,
+			"Could not find both bulk-in and bulk-out endpoints\n");
 		goto error;
 	}
 
@@ -574,7 +581,8 @@ static int skel_probe(struct usb_interface *interface,
 	retval = usb_register_dev(interface, &skel_class);
 	if (retval) {
 		/* something prevented us from registering this driver */
-		err("Not able to get a minor for this device.");
+		dev_err(&interface->dev,
+			"Not able to get a minor for this device.\n");
 		usb_set_intfdata(interface, NULL);
 		goto error;
 	}
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index ffbce4525468..fe3b6ec87122 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -536,7 +536,7 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
 	for (page = (unsigned long)fbdev->fb_mem;
 	     page < PAGE_ALIGN((unsigned long)fbdev->fb_mem + fbdev->fb_len);
 	     page += PAGE_SIZE) {
-#if CONFIG_DMA_NONCOHERENT
+#ifdef CONFIG_DMA_NONCOHERENT
 		SetPageReserved(virt_to_page(CAC_ADDR((void *)page)));
 #else
 		SetPageReserved(virt_to_page(page));
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index a159b63e18b9..7af1e8166182 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -1594,7 +1594,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL) {
-		err("dlfb_usb_probe: failed alloc of dev struct\n");
+		dev_err(&interface->dev, "dlfb_usb_probe: failed alloc of dev struct\n");
 		goto error;
 	}
 
diff --git a/drivers/staging/vme/Kconfig b/drivers/vme/Kconfig
index 6411ae51ed3f..c5c22465a805 100644
--- a/drivers/staging/vme/Kconfig
+++ b/drivers/vme/Kconfig
@@ -10,10 +10,10 @@ menuconfig VME_BUS
 
 if VME_BUS
 
-source "drivers/staging/vme/bridges/Kconfig"
+source "drivers/vme/bridges/Kconfig"
 
-source "drivers/staging/vme/devices/Kconfig"
+source "drivers/vme/boards/Kconfig"
 
-source "drivers/staging/vme/boards/Kconfig"
+source "drivers/staging/vme/devices/Kconfig"
 
 endif # VME
diff --git a/drivers/vme/Makefile b/drivers/vme/Makefile
new file mode 100644
index 000000000000..d7bfcb9fd5a1
--- /dev/null
+++ b/drivers/vme/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the VME bridge device drivers.
+#
+obj-$(CONFIG_VME_BUS)		+= vme.o
+
+obj-y				+= bridges/
+obj-y				+= boards/
diff --git a/drivers/staging/vme/boards/Kconfig b/drivers/vme/boards/Kconfig
index 761631353527..761631353527 100644
--- a/drivers/staging/vme/boards/Kconfig
+++ b/drivers/vme/boards/Kconfig
diff --git a/drivers/staging/vme/boards/Makefile b/drivers/vme/boards/Makefile
index 43658340885d..43658340885d 100644
--- a/drivers/staging/vme/boards/Makefile
+++ b/drivers/vme/boards/Makefile
diff --git a/drivers/staging/vme/boards/vme_vmivme7805.c b/drivers/vme/boards/vme_vmivme7805.c
index 8e05bb4e135a..8e05bb4e135a 100644
--- a/drivers/staging/vme/boards/vme_vmivme7805.c
+++ b/drivers/vme/boards/vme_vmivme7805.c
diff --git a/drivers/staging/vme/boards/vme_vmivme7805.h b/drivers/vme/boards/vme_vmivme7805.h
index 44c2c449808c..44c2c449808c 100644
--- a/drivers/staging/vme/boards/vme_vmivme7805.h
+++ b/drivers/vme/boards/vme_vmivme7805.h
diff --git a/drivers/staging/vme/bridges/Kconfig b/drivers/vme/bridges/Kconfig
index 9331064e0476..9331064e0476 100644
--- a/drivers/staging/vme/bridges/Kconfig
+++ b/drivers/vme/bridges/Kconfig
diff --git a/drivers/staging/vme/bridges/Makefile b/drivers/vme/bridges/Makefile
index 59638afcd502..59638afcd502 100644
--- a/drivers/staging/vme/bridges/Makefile
+++ b/drivers/vme/bridges/Makefile
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c
index 515b8b8e32a8..e0df92ec44bd 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.c
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@@ -29,8 +29,8 @@
 #include <linux/time.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "../vme_bridge.h"
 #include "vme_ca91cx42.h"
 
@@ -1501,7 +1501,7 @@ static int ca91cx42_slot_get(struct vme_bridge *ca91cx42_bridge)
 
 }
 
-void *ca91cx42_alloc_consistent(struct device *parent, size_t size,
+static void *ca91cx42_alloc_consistent(struct device *parent, size_t size,
 	dma_addr_t *dma)
 {
 	struct pci_dev *pdev;
@@ -1512,8 +1512,8 @@ void *ca91cx42_alloc_consistent(struct device *parent, size_t size,
 	return pci_alloc_consistent(pdev, size, dma);
 }
 
-void ca91cx42_free_consistent(struct device *parent, size_t size, void *vaddr,
-	dma_addr_t dma)
+static void ca91cx42_free_consistent(struct device *parent, size_t size,
+	void *vaddr, dma_addr_t dma)
 {
 	struct pci_dev *pdev;
 
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.h b/drivers/vme/bridges/vme_ca91cx42.h
index 02a7c794db05..02a7c794db05 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.h
+++ b/drivers/vme/bridges/vme_ca91cx42.h
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index f50582169b24..f6385f7a66d9 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -29,8 +29,9 @@
 #include <linux/time.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <linux/byteorder/generic.h>
+#include <linux/vme.h>
 
-#include "../vme.h"
 #include "../vme_bridge.h"
 #include "vme_tsi148.h"
 
@@ -1415,51 +1416,55 @@ static unsigned int tsi148_master_rmw(struct vme_master_resource *image,
 	return result;
 }
 
-static int tsi148_dma_set_vme_src_attributes(struct device *dev, u32 *attr,
+static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr,
 	u32 aspace, u32 cycle, u32 dwidth)
 {
+	u32 val;
+
+	val = be32_to_cpu(*attr);
+
 	/* Setup 2eSST speeds */
 	switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
 	case VME_2eSST160:
-		*attr |= TSI148_LCSR_DSAT_2eSSTM_160;
+		val |= TSI148_LCSR_DSAT_2eSSTM_160;
 		break;
 	case VME_2eSST267:
-		*attr |= TSI148_LCSR_DSAT_2eSSTM_267;
+		val |= TSI148_LCSR_DSAT_2eSSTM_267;
 		break;
 	case VME_2eSST320:
-		*attr |= TSI148_LCSR_DSAT_2eSSTM_320;
+		val |= TSI148_LCSR_DSAT_2eSSTM_320;
 		break;
 	}
 
 	/* Setup cycle types */
 	if (cycle & VME_SCT)
-		*attr |= TSI148_LCSR_DSAT_TM_SCT;
+		val |= TSI148_LCSR_DSAT_TM_SCT;
 
 	if (cycle & VME_BLT)
-		*attr |= TSI148_LCSR_DSAT_TM_BLT;
+		val |= TSI148_LCSR_DSAT_TM_BLT;
 
 	if (cycle & VME_MBLT)
-		*attr |= TSI148_LCSR_DSAT_TM_MBLT;
+		val |= TSI148_LCSR_DSAT_TM_MBLT;
 
 	if (cycle & VME_2eVME)
-		*attr |= TSI148_LCSR_DSAT_TM_2eVME;
+		val |= TSI148_LCSR_DSAT_TM_2eVME;
 
 	if (cycle & VME_2eSST)
-		*attr |= TSI148_LCSR_DSAT_TM_2eSST;
+		val |= TSI148_LCSR_DSAT_TM_2eSST;
 
 	if (cycle & VME_2eSSTB) {
 		dev_err(dev, "Currently not setting Broadcast Select "
 			"Registers\n");
-		*attr |= TSI148_LCSR_DSAT_TM_2eSSTB;
+		val |= TSI148_LCSR_DSAT_TM_2eSSTB;
 	}
 
 	/* Setup data width */
 	switch (dwidth) {
 	case VME_D16:
-		*attr |= TSI148_LCSR_DSAT_DBW_16;
+		val |= TSI148_LCSR_DSAT_DBW_16;
 		break;
 	case VME_D32:
-		*attr |= TSI148_LCSR_DSAT_DBW_32;
+		val |= TSI148_LCSR_DSAT_DBW_32;
 		break;
 	default:
 		dev_err(dev, "Invalid data width\n");
@@ -1469,31 +1474,31 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, u32 *attr,
 	/* Setup address space */
 	switch (aspace) {
 	case VME_A16:
-		*attr |= TSI148_LCSR_DSAT_AMODE_A16;
+		val |= TSI148_LCSR_DSAT_AMODE_A16;
 		break;
 	case VME_A24:
-		*attr |= TSI148_LCSR_DSAT_AMODE_A24;
+		val |= TSI148_LCSR_DSAT_AMODE_A24;
 		break;
 	case VME_A32:
-		*attr |= TSI148_LCSR_DSAT_AMODE_A32;
+		val |= TSI148_LCSR_DSAT_AMODE_A32;
 		break;
 	case VME_A64:
-		*attr |= TSI148_LCSR_DSAT_AMODE_A64;
+		val |= TSI148_LCSR_DSAT_AMODE_A64;
 		break;
 	case VME_CRCSR:
-		*attr |= TSI148_LCSR_DSAT_AMODE_CRCSR;
+		val |= TSI148_LCSR_DSAT_AMODE_CRCSR;
 		break;
 	case VME_USER1:
-		*attr |= TSI148_LCSR_DSAT_AMODE_USER1;
+		val |= TSI148_LCSR_DSAT_AMODE_USER1;
 		break;
 	case VME_USER2:
-		*attr |= TSI148_LCSR_DSAT_AMODE_USER2;
+		val |= TSI148_LCSR_DSAT_AMODE_USER2;
 		break;
 	case VME_USER3:
-		*attr |= TSI148_LCSR_DSAT_AMODE_USER3;
+		val |= TSI148_LCSR_DSAT_AMODE_USER3;
 		break;
 	case VME_USER4:
-		*attr |= TSI148_LCSR_DSAT_AMODE_USER4;
+		val |= TSI148_LCSR_DSAT_AMODE_USER4;
 		break;
 	default:
 		dev_err(dev, "Invalid address space\n");
@@ -1502,58 +1507,64 @@ static int tsi148_dma_set_vme_src_attributes(struct device *dev, u32 *attr,
 	}
 
 	if (cycle & VME_SUPER)
-		*attr |= TSI148_LCSR_DSAT_SUP;
+		val |= TSI148_LCSR_DSAT_SUP;
 	if (cycle & VME_PROG)
-		*attr |= TSI148_LCSR_DSAT_PGM;
+		val |= TSI148_LCSR_DSAT_PGM;
+
+	*attr = cpu_to_be32(val);
 
 	return 0;
 }
 
-static int tsi148_dma_set_vme_dest_attributes(struct device *dev, u32 *attr,
+static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr,
 	u32 aspace, u32 cycle, u32 dwidth)
 {
+	u32 val;
+
+	val = be32_to_cpu(*attr);
+
 	/* Setup 2eSST speeds */
 	switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
 	case VME_2eSST160:
-		*attr |= TSI148_LCSR_DDAT_2eSSTM_160;
+		val |= TSI148_LCSR_DDAT_2eSSTM_160;
 		break;
 	case VME_2eSST267:
-		*attr |= TSI148_LCSR_DDAT_2eSSTM_267;
+		val |= TSI148_LCSR_DDAT_2eSSTM_267;
 		break;
 	case VME_2eSST320:
-		*attr |= TSI148_LCSR_DDAT_2eSSTM_320;
+		val |= TSI148_LCSR_DDAT_2eSSTM_320;
 		break;
 	}
 
 	/* Setup cycle types */
 	if (cycle & VME_SCT)
-		*attr |= TSI148_LCSR_DDAT_TM_SCT;
+		val |= TSI148_LCSR_DDAT_TM_SCT;
 
 	if (cycle & VME_BLT)
-		*attr |= TSI148_LCSR_DDAT_TM_BLT;
+		val |= TSI148_LCSR_DDAT_TM_BLT;
 
 	if (cycle & VME_MBLT)
-		*attr |= TSI148_LCSR_DDAT_TM_MBLT;
+		val |= TSI148_LCSR_DDAT_TM_MBLT;
 
 	if (cycle & VME_2eVME)
-		*attr |= TSI148_LCSR_DDAT_TM_2eVME;
+		val |= TSI148_LCSR_DDAT_TM_2eVME;
 
 	if (cycle & VME_2eSST)
-		*attr |= TSI148_LCSR_DDAT_TM_2eSST;
+		val |= TSI148_LCSR_DDAT_TM_2eSST;
 
 	if (cycle & VME_2eSSTB) {
 		dev_err(dev, "Currently not setting Broadcast Select "
 			"Registers\n");
-		*attr |= TSI148_LCSR_DDAT_TM_2eSSTB;
+		val |= TSI148_LCSR_DDAT_TM_2eSSTB;
 	}
 
 	/* Setup data width */
 	switch (dwidth) {
 	case VME_D16:
-		*attr |= TSI148_LCSR_DDAT_DBW_16;
+		val |= TSI148_LCSR_DDAT_DBW_16;
 		break;
 	case VME_D32:
-		*attr |= TSI148_LCSR_DDAT_DBW_32;
+		val |= TSI148_LCSR_DDAT_DBW_32;
 		break;
 	default:
 		dev_err(dev, "Invalid data width\n");
@@ -1563,31 +1574,31 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, u32 *attr,
 	/* Setup address space */
 	switch (aspace) {
 	case VME_A16:
-		*attr |= TSI148_LCSR_DDAT_AMODE_A16;
+		val |= TSI148_LCSR_DDAT_AMODE_A16;
 		break;
 	case VME_A24:
-		*attr |= TSI148_LCSR_DDAT_AMODE_A24;
+		val |= TSI148_LCSR_DDAT_AMODE_A24;
 		break;
 	case VME_A32:
-		*attr |= TSI148_LCSR_DDAT_AMODE_A32;
+		val |= TSI148_LCSR_DDAT_AMODE_A32;
 		break;
 	case VME_A64:
-		*attr |= TSI148_LCSR_DDAT_AMODE_A64;
+		val |= TSI148_LCSR_DDAT_AMODE_A64;
 		break;
 	case VME_CRCSR:
-		*attr |= TSI148_LCSR_DDAT_AMODE_CRCSR;
+		val |= TSI148_LCSR_DDAT_AMODE_CRCSR;
 		break;
 	case VME_USER1:
-		*attr |= TSI148_LCSR_DDAT_AMODE_USER1;
+		val |= TSI148_LCSR_DDAT_AMODE_USER1;
 		break;
 	case VME_USER2:
-		*attr |= TSI148_LCSR_DDAT_AMODE_USER2;
+		val |= TSI148_LCSR_DDAT_AMODE_USER2;
 		break;
 	case VME_USER3:
-		*attr |= TSI148_LCSR_DDAT_AMODE_USER3;
+		val |= TSI148_LCSR_DDAT_AMODE_USER3;
 		break;
 	case VME_USER4:
-		*attr |= TSI148_LCSR_DDAT_AMODE_USER4;
+		val |= TSI148_LCSR_DDAT_AMODE_USER4;
 		break;
 	default:
 		dev_err(dev, "Invalid address space\n");
@@ -1596,25 +1607,28 @@ static int tsi148_dma_set_vme_dest_attributes(struct device *dev, u32 *attr,
 	}
 
 	if (cycle & VME_SUPER)
-		*attr |= TSI148_LCSR_DDAT_SUP;
+		val |= TSI148_LCSR_DDAT_SUP;
 	if (cycle & VME_PROG)
-		*attr |= TSI148_LCSR_DDAT_PGM;
+		val |= TSI148_LCSR_DDAT_PGM;
+
+	*attr = cpu_to_be32(val);
 
 	return 0;
 }
 
 /*
  * Add a link list descriptor to the list
+ *
+ * Note: DMA engine expects the DMA descriptor to be big endian.
  */
 static int tsi148_dma_list_add(struct vme_dma_list *list,
 	struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count)
 {
 	struct tsi148_dma_entry *entry, *prev;
-	u32 address_high, address_low;
+	u32 address_high, address_low, val;
 	struct vme_dma_pattern *pattern_attr;
 	struct vme_dma_pci *pci_attr;
 	struct vme_dma_vme *vme_attr;
-	dma_addr_t desc_ptr;
 	int retval = 0;
 	struct vme_bridge *tsi148_bridge;
 
@@ -1648,34 +1662,36 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	case VME_DMA_PATTERN:
 		pattern_attr = src->private;
 
-		entry->descriptor.dsal = pattern_attr->pattern;
-		entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PAT;
+		entry->descriptor.dsal = cpu_to_be32(pattern_attr->pattern);
+
+		val = TSI148_LCSR_DSAT_TYP_PAT;
+
 		/* Default behaviour is 32 bit pattern */
 		if (pattern_attr->type & VME_DMA_PATTERN_BYTE)
-			entry->descriptor.dsat |= TSI148_LCSR_DSAT_PSZ;
+			val |= TSI148_LCSR_DSAT_PSZ;
 
 		/* It seems that the default behaviour is to increment */
 		if ((pattern_attr->type & VME_DMA_PATTERN_INCREMENT) == 0)
-			entry->descriptor.dsat |= TSI148_LCSR_DSAT_NIN;
-
+			val |= TSI148_LCSR_DSAT_NIN;
+		entry->descriptor.dsat = cpu_to_be32(val);
 		break;
 	case VME_DMA_PCI:
 		pci_attr = src->private;
 
 		reg_split((unsigned long long)pci_attr->address, &address_high,
 			&address_low);
-		entry->descriptor.dsau = address_high;
-		entry->descriptor.dsal = address_low;
-		entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PCI;
+		entry->descriptor.dsau = cpu_to_be32(address_high);
+		entry->descriptor.dsal = cpu_to_be32(address_low);
+		entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_PCI);
 		break;
 	case VME_DMA_VME:
 		vme_attr = src->private;
 
 		reg_split((unsigned long long)vme_attr->address, &address_high,
 			&address_low);
-		entry->descriptor.dsau = address_high;
-		entry->descriptor.dsal = address_low;
-		entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_VME;
+		entry->descriptor.dsau = cpu_to_be32(address_high);
+		entry->descriptor.dsal = cpu_to_be32(address_low);
+		entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_VME);
 
 		retval = tsi148_dma_set_vme_src_attributes(
 			tsi148_bridge->parent, &entry->descriptor.dsat,
@@ -1691,9 +1707,8 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	}
 
 	/* Assume last link - this will be over-written by adding another */
-	entry->descriptor.dnlau = 0;
-	entry->descriptor.dnlal = TSI148_LCSR_DNLAL_LLA;
-
+	entry->descriptor.dnlau = cpu_to_be32(0);
+	entry->descriptor.dnlal = cpu_to_be32(TSI148_LCSR_DNLAL_LLA);
 
 	/* Fill out destination part */
 	switch (dest->type) {
@@ -1702,18 +1717,18 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 
 		reg_split((unsigned long long)pci_attr->address, &address_high,
 			&address_low);
-		entry->descriptor.ddau = address_high;
-		entry->descriptor.ddal = address_low;
-		entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_PCI;
+		entry->descriptor.ddau = cpu_to_be32(address_high);
+		entry->descriptor.ddal = cpu_to_be32(address_low);
+		entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_PCI);
 		break;
 	case VME_DMA_VME:
 		vme_attr = dest->private;
 
 		reg_split((unsigned long long)vme_attr->address, &address_high,
 			&address_low);
-		entry->descriptor.ddau = address_high;
-		entry->descriptor.ddal = address_low;
-		entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_VME;
+		entry->descriptor.ddau = cpu_to_be32(address_high);
+		entry->descriptor.ddal = cpu_to_be32(address_low);
+		entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_VME);
 
 		retval = tsi148_dma_set_vme_dest_attributes(
 			tsi148_bridge->parent, &entry->descriptor.ddat,
@@ -1729,7 +1744,7 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	}
 
 	/* Fill out count */
-	entry->descriptor.dcnt = (u32)count;
+	entry->descriptor.dcnt = cpu_to_be32((u32)count);
 
 	/* Add to list */
 	list_add_tail(&entry->list, &list->entries);
@@ -1739,9 +1754,15 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 		prev = list_entry(entry->list.prev, struct tsi148_dma_entry,
 			list);
 		/* We need the bus address for the pointer */
-		desc_ptr = virt_to_bus(&entry->descriptor);
-		reg_split(desc_ptr, &prev->descriptor.dnlau,
-			&prev->descriptor.dnlal);
+		entry->dma_handle = dma_map_single(tsi148_bridge->parent,
+			&entry->descriptor,
+			sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
+
+		reg_split((unsigned long long)entry->dma_handle, &address_high,
+			&address_low);
+		entry->descriptor.dnlau = cpu_to_be32(address_high);
+		entry->descriptor.dnlal = cpu_to_be32(address_low);
+
 	}
 
 	return 0;
@@ -1784,7 +1805,6 @@ static int tsi148_dma_list_exec(struct vme_dma_list *list)
 	struct vme_dma_resource *ctrlr;
 	int channel, retval = 0;
 	struct tsi148_dma_entry *entry;
-	dma_addr_t bus_addr;
 	u32 bus_addr_high, bus_addr_low;
 	u32 val, dctlreg = 0;
 	struct vme_bridge *tsi148_bridge;
@@ -1817,23 +1837,29 @@ static int tsi148_dma_list_exec(struct vme_dma_list *list)
 	entry = list_first_entry(&list->entries, struct tsi148_dma_entry,
 		list);
 
-	bus_addr = virt_to_bus(&entry->descriptor);
+	entry->dma_handle = dma_map_single(tsi148_bridge->parent,
+		&entry->descriptor,
+		sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
 
 	mutex_unlock(&ctrlr->mtx);
 
-	reg_split(bus_addr, &bus_addr_high, &bus_addr_low);
+	reg_split(entry->dma_handle, &bus_addr_high, &bus_addr_low);
 
 	iowrite32be(bus_addr_high, bridge->base +
 		TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAU);
 	iowrite32be(bus_addr_low, bridge->base +
 		TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAL);
 
+	dctlreg = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] +
+		TSI148_LCSR_OFFSET_DCTL);
+
 	/* Start the operation */
 	iowrite32be(dctlreg | TSI148_LCSR_DCTL_DGO, bridge->base +
 		TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL);
 
 	wait_event_interruptible(bridge->dma_queue[channel],
 		tsi148_dma_busy(ctrlr->parent, channel));
+
 	/*
 	 * Read status register, this register is valid until we kick off a
 	 * new transfer.
@@ -1864,10 +1890,15 @@ static int tsi148_dma_list_empty(struct vme_dma_list *list)
 	struct list_head *pos, *temp;
 	struct tsi148_dma_entry *entry;
 
+	struct vme_bridge *tsi148_bridge = list->parent->parent;
+
 	/* detach and free each entry */
 	list_for_each_safe(pos, temp, &list->entries) {
 		list_del(pos);
 		entry = list_entry(pos, struct tsi148_dma_entry, list);
+
+		dma_unmap_single(tsi148_bridge->parent, entry->dma_handle,
+			sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
 		kfree(entry);
 	}
 
@@ -2110,7 +2141,7 @@ static int tsi148_slot_get(struct vme_bridge *tsi148_bridge)
 	return (int)slot;
 }
 
-void *tsi148_alloc_consistent(struct device *parent, size_t size,
+static void *tsi148_alloc_consistent(struct device *parent, size_t size,
 	dma_addr_t *dma)
 {
 	struct pci_dev *pdev;
@@ -2121,8 +2152,8 @@ void *tsi148_alloc_consistent(struct device *parent, size_t size,
 	return pci_alloc_consistent(pdev, size, dma);
 }
 
-void tsi148_free_consistent(struct device *parent, size_t size, void *vaddr,
-	dma_addr_t dma)
+static void tsi148_free_consistent(struct device *parent, size_t size,
+	void *vaddr, dma_addr_t dma)
 {
 	struct pci_dev *pdev;
 
diff --git a/drivers/staging/vme/bridges/vme_tsi148.h b/drivers/vme/bridges/vme_tsi148.h
index a3ac2fe98816..f5ed14382a8d 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.h
+++ b/drivers/vme/bridges/vme_tsi148.h
@@ -56,16 +56,16 @@ struct tsi148_driver {
  *       correctly laid out - It must also be aligned on 64-bit boundaries.
  */
 struct tsi148_dma_descriptor {
-	u32 dsau;      /* Source Address */
-	u32 dsal;
-	u32 ddau;      /* Destination Address */
-	u32 ddal;
-	u32 dsat;      /* Source attributes */
-	u32 ddat;      /* Destination attributes */
-	u32 dnlau;     /* Next link address */
-	u32 dnlal;
-	u32 dcnt;      /* Byte count */
-	u32 ddbs;      /* 2eSST Broadcast select */
+	__be32 dsau;      /* Source Address */
+	__be32 dsal;
+	__be32 ddau;      /* Destination Address */
+	__be32 ddal;
+	__be32 dsat;      /* Source attributes */
+	__be32 ddat;      /* Destination attributes */
+	__be32 dnlau;     /* Next link address */
+	__be32 dnlal;
+	__be32 dcnt;      /* Byte count */
+	__be32 ddbs;      /* 2eSST Broadcast select */
 };
 
 struct tsi148_dma_entry {
@@ -75,6 +75,7 @@ struct tsi148_dma_entry {
 	 */
 	struct tsi148_dma_descriptor descriptor;
 	struct list_head list;
+	dma_addr_t dma_handle;
 };
 
 /*
diff --git a/drivers/staging/vme/vme.c b/drivers/vme/vme.c
index 70722ae52321..95a9f71d793e 100644
--- a/drivers/staging/vme/vme.c
+++ b/drivers/vme/vme.c
@@ -30,8 +30,8 @@
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
+#include <linux/vme.h>
 
-#include "vme.h"
 #include "vme_bridge.h"
 
 /* Bitmask and list of registered buses both protected by common mutex */
@@ -98,14 +98,13 @@ void *vme_alloc_consistent(struct vme_resource *resource, size_t size,
 	}
 
 	if (bridge->parent == NULL) {
-		printk(KERN_ERR "Dev entry NULL for"
-			" bridge %s\n", bridge->name);
+		printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
 		return NULL;
 	}
 
 	if (bridge->alloc_consistent == NULL) {
-		printk(KERN_ERR "alloc_consistent not supported by"
-			" bridge %s\n", bridge->name);
+		printk(KERN_ERR "alloc_consistent not supported by bridge %s\n",
+		       bridge->name);
 		return NULL;
 	}
 
@@ -133,14 +132,13 @@ void vme_free_consistent(struct vme_resource *resource, size_t size,
 	}
 
 	if (bridge->parent == NULL) {
-		printk(KERN_ERR "Dev entry NULL for"
-			" bridge %s\n", bridge->name);
+		printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
 		return;
 	}
 
 	if (bridge->free_consistent == NULL) {
-		printk(KERN_ERR "free_consistent not supported by"
-			" bridge %s\n", bridge->name);
+		printk(KERN_ERR "free_consistent not supported by bridge %s\n",
+		       bridge->name);
 		return;
 	}
 
@@ -747,15 +745,13 @@ struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, u32 type)
 
 	attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL);
 	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes "
-			"structure\n");
+		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
 		goto err_attr;
 	}
 
 	pattern_attr = kmalloc(sizeof(struct vme_dma_pattern), GFP_KERNEL);
 	if (pattern_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for pattern "
-			"attributes\n");
+		printk(KERN_ERR "Unable to allocate memory for pattern attributes\n");
 		goto err_pat;
 	}
 
@@ -786,15 +782,13 @@ struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t address)
 
 	attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL);
 	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes "
-			"structure\n");
+		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
 		goto err_attr;
 	}
 
 	pci_attr = kmalloc(sizeof(struct vme_dma_pci), GFP_KERNEL);
 	if (pci_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for pci "
-			"attributes\n");
+		printk(KERN_ERR "Unable to allocate memory for pci attributes\n");
 		goto err_pci;
 	}
 
@@ -826,15 +820,13 @@ struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long address,
 	attributes = kmalloc(
 		sizeof(struct vme_dma_attr), GFP_KERNEL);
 	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes "
-			"structure\n");
+		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
 		goto err_attr;
 	}
 
 	vme_attr = kmalloc(sizeof(struct vme_dma_vme), GFP_KERNEL);
 	if (vme_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for vme "
-			"attributes\n");
+		printk(KERN_ERR "Unable to allocate memory for vme attributes\n");
 		goto err_vme;
 	}
 
@@ -982,8 +974,8 @@ void vme_irq_handler(struct vme_bridge *bridge, int level, int statid)
 	if (call != NULL)
 		call(level, statid, priv_data);
 	else
-		printk(KERN_WARNING "Spurilous VME interrupt, level:%x, "
-			"vector:%x\n", level, statid);
+		printk(KERN_WARNING "Spurilous VME interrupt, level:%x, vector:%x\n",
+		       level, statid);
 }
 EXPORT_SYMBOL(vme_irq_handler);
 
@@ -1112,8 +1104,7 @@ struct vme_resource *vme_lm_request(struct vme_dev *vdev)
 			struct vme_lm_resource, list);
 
 		if (lm == NULL) {
-			printk(KERN_ERR "Registered NULL Location Monitor "
-				"resource\n");
+			printk(KERN_ERR "Registered NULL Location Monitor resource\n");
 			continue;
 		}
 
diff --git a/drivers/staging/vme/vme_bridge.h b/drivers/vme/vme_bridge.h
index 934949abd745..934949abd745 100644
--- a/drivers/staging/vme/vme_bridge.h
+++ b/drivers/vme/vme_bridge.h
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index fd2c7bd9dfbe..6743bde038cc 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -16,7 +16,7 @@ config W1_CON
 	depends on CONNECTOR
 	bool "Userspace communication over connector"
 	default y
-	--- help ---
+	---help---
 	  This allows to communicate with userspace using connector. For more
 	  information see <file:Documentation/connector/connector.txt>.
 	  There are three types of messages between w1 core and userspace:
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c
index 7c8cdb8aed26..8e813eed0f0a 100644
--- a/drivers/w1/slaves/w1_ds2408.c
+++ b/drivers/w1/slaves/w1_ds2408.c
@@ -332,7 +332,6 @@ static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
 		},
 		.size = 1,
 		.read = w1_f29_read_cond_search_mask,
-		.write = 0,
 	},
 	{
 		.attr =	{
@@ -341,7 +340,6 @@ static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
 		},
 		.size = 1,
 		.read = w1_f29_read_cond_search_polarity,
-		.write = 0,
 	},
 	{
 		.attr =	{
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 9761950697b4..2f2e894ea0c8 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -1027,7 +1027,7 @@ static int __init w1_init(void)
 	retval = driver_register(&w1_slave_driver);
 	if (retval) {
 		printk(KERN_ERR
-			"Failed to register master driver. err=%d.\n",
+			"Failed to register slave driver. err=%d.\n",
 			retval);
 		goto err_out_master_unregister;
 	}
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 3135b2c63998..e10acc237733 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -31,6 +31,9 @@
 static int w1_delay_parm = 1;
 module_param_named(delay_coef, w1_delay_parm, int, 0);
 
+static int w1_disable_irqs = 0;
+module_param_named(disable_irqs, w1_disable_irqs, int, 0);
+
 static u8 w1_crc8_table[] = {
 	0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65,
 	157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220,
@@ -79,6 +82,10 @@ static u8 w1_touch_bit(struct w1_master *dev, int bit)
  */
 static void w1_write_bit(struct w1_master *dev, int bit)
 {
+	unsigned long flags = 0;
+
+	if(w1_disable_irqs) local_irq_save(flags);
+
 	if (bit) {
 		dev->bus_master->write_bit(dev->bus_master->data, 0);
 		w1_delay(6);
@@ -90,6 +97,8 @@ static void w1_write_bit(struct w1_master *dev, int bit)
 		dev->bus_master->write_bit(dev->bus_master->data, 1);
 		w1_delay(10);
 	}
+
+	if(w1_disable_irqs) local_irq_restore(flags);
 }
 
 /**
@@ -158,7 +167,7 @@ EXPORT_SYMBOL_GPL(w1_write_8);
 static u8 w1_read_bit(struct w1_master *dev)
 {
 	int result;
-	unsigned long flags;
+	unsigned long flags = 0;
 
 	/* sample timing is critical here */
 	local_irq_save(flags);
@@ -318,6 +327,9 @@ EXPORT_SYMBOL_GPL(w1_read_block);
 int w1_reset_bus(struct w1_master *dev)
 {
 	int result;
+	unsigned long flags = 0;
+
+	if(w1_disable_irqs) local_irq_save(flags);
 
 	if (dev->bus_master->reset_bus)
 		result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1;
@@ -330,19 +342,21 @@ int w1_reset_bus(struct w1_master *dev)
 		 * cpu for such a short amount of time AND get it back in
 		 * the maximum amount of time.
 		 */
-		w1_delay(480);
+		w1_delay(500);
 		dev->bus_master->write_bit(dev->bus_master->data, 1);
 		w1_delay(70);
 
 		result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1;
-		/* minmum 70 (above) + 410 = 480 us
+		/* minmum 70 (above) + 430 = 500 us
 		 * There aren't any timing requirements between a reset and
 		 * the following transactions.  Sleeping is safe here.
 		 */
-		/* w1_delay(410); min required time */
+		/* w1_delay(430); min required time */
 		msleep(1);
 	}
 
+	if(w1_disable_irqs) local_irq_restore(flags);
+
 	return result;
 }
 EXPORT_SYMBOL_GPL(w1_reset_bus);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 37096246c937..edebaf771f50 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -937,7 +937,7 @@ config BCM47XX_WDT
 	tristate "Broadcom BCM47xx Watchdog Timer"
 	depends on BCM47XX
 	help
-	  Hardware driver for the Broadcom BCM47xx Watchog Timer.
+	  Hardware driver for the Broadcom BCM47xx Watchdog Timer.
 
 config RC32434_WDT
 	tristate "IDT RC32434 SoC Watchdog Timer"
@@ -1138,6 +1138,7 @@ config ZVM_WATCHDOG
 config SH_WDT
 	tristate "SuperH Watchdog"
 	depends on SUPERH && (CPU_SH3 || CPU_SH4)
+	select WATCHDOG_CORE
 	help
 	  This driver adds watchdog support for the integrated watchdog in the
 	  SuperH processors. If you have one of these processors and wish
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
index 93958a7763e6..e5b59bebcdb1 100644
--- a/drivers/watchdog/shwdt.c
+++ b/drivers/watchdog/shwdt.c
@@ -3,7 +3,7 @@
  *
  * Watchdog driver for integrated watchdog in the SuperH processors.
  *
- * Copyright (C) 2001 - 2010  Paul Mundt <lethal@linux-sh.org>
+ * Copyright (C) 2001 - 2012  Paul Mundt <lethal@linux-sh.org>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -25,16 +25,15 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/types.h>
+#include <linux/spinlock.h>
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
-#include <linux/reboot.h>
-#include <linux/notifier.h>
-#include <linux/ioport.h>
+#include <linux/pm_runtime.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <linux/uaccess.h>
+#include <linux/clk.h>
 #include <asm/watchdog.h>
 
 #define DRV_NAME "sh-wdt"
@@ -69,10 +68,6 @@
 static int clock_division_ratio = WTCSR_CKS_4096;
 #define next_ping_period(cks)	(jiffies + msecs_to_jiffies(cks - 4))
 
-static const struct watchdog_info sh_wdt_info;
-static struct platform_device *sh_wdt_dev;
-static DEFINE_SPINLOCK(shwdt_lock);
-
 #define WATCHDOG_HEARTBEAT 30			/* 30 sec default heartbeat */
 static int heartbeat = WATCHDOG_HEARTBEAT;	/* in seconds */
 static bool nowayout = WATCHDOG_NOWAYOUT;
@@ -81,19 +76,22 @@ static unsigned long next_heartbeat;
 struct sh_wdt {
 	void __iomem		*base;
 	struct device		*dev;
+	struct clk		*clk;
+	spinlock_t		lock;
 
 	struct timer_list	timer;
-
-	unsigned long		enabled;
-	char			expect_close;
 };
 
-static void sh_wdt_start(struct sh_wdt *wdt)
+static int sh_wdt_start(struct watchdog_device *wdt_dev)
 {
+	struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
 	unsigned long flags;
 	u8 csr;
 
-	spin_lock_irqsave(&shwdt_lock, flags);
+	pm_runtime_get_sync(wdt->dev);
+	clk_enable(wdt->clk);
+
+	spin_lock_irqsave(&wdt->lock, flags);
 
 	next_heartbeat = jiffies + (heartbeat * HZ);
 	mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
@@ -122,15 +120,18 @@ static void sh_wdt_start(struct sh_wdt *wdt)
 	csr &= ~RSTCSR_RSTS;
 	sh_wdt_write_rstcsr(csr);
 #endif
-	spin_unlock_irqrestore(&shwdt_lock, flags);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	return 0;
 }
 
-static void sh_wdt_stop(struct sh_wdt *wdt)
+static int sh_wdt_stop(struct watchdog_device *wdt_dev)
 {
+	struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
 	unsigned long flags;
 	u8 csr;
 
-	spin_lock_irqsave(&shwdt_lock, flags);
+	spin_lock_irqsave(&wdt->lock, flags);
 
 	del_timer(&wdt->timer);
 
@@ -138,28 +139,39 @@ static void sh_wdt_stop(struct sh_wdt *wdt)
 	csr &= ~WTCSR_TME;
 	sh_wdt_write_csr(csr);
 
-	spin_unlock_irqrestore(&shwdt_lock, flags);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	clk_disable(wdt->clk);
+	pm_runtime_put_sync(wdt->dev);
+
+	return 0;
 }
 
-static inline void sh_wdt_keepalive(struct sh_wdt *wdt)
+static int sh_wdt_keepalive(struct watchdog_device *wdt_dev)
 {
+	struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
 	unsigned long flags;
 
-	spin_lock_irqsave(&shwdt_lock, flags);
+	spin_lock_irqsave(&wdt->lock, flags);
 	next_heartbeat = jiffies + (heartbeat * HZ);
-	spin_unlock_irqrestore(&shwdt_lock, flags);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	return 0;
 }
 
-static int sh_wdt_set_heartbeat(int t)
+static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t)
 {
+	struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
 	unsigned long flags;
 
 	if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
 		return -EINVAL;
 
-	spin_lock_irqsave(&shwdt_lock, flags);
+	spin_lock_irqsave(&wdt->lock, flags);
 	heartbeat = t;
-	spin_unlock_irqrestore(&shwdt_lock, flags);
+	wdt_dev->timeout = t;
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
 	return 0;
 }
 
@@ -168,7 +180,7 @@ static void sh_wdt_ping(unsigned long data)
 	struct sh_wdt *wdt = (struct sh_wdt *)data;
 	unsigned long flags;
 
-	spin_lock_irqsave(&shwdt_lock, flags);
+	spin_lock_irqsave(&wdt->lock, flags);
 	if (time_before(jiffies, next_heartbeat)) {
 		u8 csr;
 
@@ -182,137 +194,9 @@ static void sh_wdt_ping(unsigned long data)
 	} else
 		dev_warn(wdt->dev, "Heartbeat lost! Will not ping "
 		         "the watchdog\n");
-	spin_unlock_irqrestore(&shwdt_lock, flags);
-}
-
-static int sh_wdt_open(struct inode *inode, struct file *file)
-{
-	struct sh_wdt *wdt = platform_get_drvdata(sh_wdt_dev);
-
-	if (test_and_set_bit(0, &wdt->enabled))
-		return -EBUSY;
-	if (nowayout)
-		__module_get(THIS_MODULE);
-
-	file->private_data = wdt;
-
-	sh_wdt_start(wdt);
-
-	return nonseekable_open(inode, file);
-}
-
-static int sh_wdt_close(struct inode *inode, struct file *file)
-{
-	struct sh_wdt *wdt = file->private_data;
-
-	if (wdt->expect_close == 42) {
-		sh_wdt_stop(wdt);
-	} else {
-		dev_crit(wdt->dev, "Unexpected close, not "
-		         "stopping watchdog!\n");
-		sh_wdt_keepalive(wdt);
-	}
-
-	clear_bit(0, &wdt->enabled);
-	wdt->expect_close = 0;
-
-	return 0;
-}
-
-static ssize_t sh_wdt_write(struct file *file, const char *buf,
-			    size_t count, loff_t *ppos)
-{
-	struct sh_wdt *wdt = file->private_data;
-
-	if (count) {
-		if (!nowayout) {
-			size_t i;
-
-			wdt->expect_close = 0;
-
-			for (i = 0; i != count; i++) {
-				char c;
-				if (get_user(c, buf + i))
-					return -EFAULT;
-				if (c == 'V')
-					wdt->expect_close = 42;
-			}
-		}
-		sh_wdt_keepalive(wdt);
-	}
-
-	return count;
+	spin_unlock_irqrestore(&wdt->lock, flags);
 }
 
-static long sh_wdt_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg)
-{
-	struct sh_wdt *wdt = file->private_data;
-	int new_heartbeat;
-	int options, retval = -EINVAL;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		return copy_to_user((struct watchdog_info *)arg,
-			  &sh_wdt_info, sizeof(sh_wdt_info)) ? -EFAULT : 0;
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, (int *)arg);
-	case WDIOC_SETOPTIONS:
-		if (get_user(options, (int *)arg))
-			return -EFAULT;
-
-		if (options & WDIOS_DISABLECARD) {
-			sh_wdt_stop(wdt);
-			retval = 0;
-		}
-
-		if (options & WDIOS_ENABLECARD) {
-			sh_wdt_start(wdt);
-			retval = 0;
-		}
-
-		return retval;
-	case WDIOC_KEEPALIVE:
-		sh_wdt_keepalive(wdt);
-		return 0;
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_heartbeat, (int *)arg))
-			return -EFAULT;
-
-		if (sh_wdt_set_heartbeat(new_heartbeat))
-			return -EINVAL;
-
-		sh_wdt_keepalive(wdt);
-		/* Fall */
-	case WDIOC_GETTIMEOUT:
-		return put_user(heartbeat, (int *)arg);
-	default:
-		return -ENOTTY;
-	}
-	return 0;
-}
-
-static int sh_wdt_notify_sys(struct notifier_block *this,
-			     unsigned long code, void *unused)
-{
-	struct sh_wdt *wdt = platform_get_drvdata(sh_wdt_dev);
-
-	if (code == SYS_DOWN || code == SYS_HALT)
-		sh_wdt_stop(wdt);
-
-	return NOTIFY_DONE;
-}
-
-static const struct file_operations sh_wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= sh_wdt_write,
-	.unlocked_ioctl	= sh_wdt_ioctl,
-	.open		= sh_wdt_open,
-	.release	= sh_wdt_close,
-};
-
 static const struct watchdog_info sh_wdt_info = {
 	.options		= WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
 				  WDIOF_MAGICCLOSE,
@@ -320,14 +204,17 @@ static const struct watchdog_info sh_wdt_info = {
 	.identity		= "SH WDT",
 };
 
-static struct notifier_block sh_wdt_notifier = {
-	.notifier_call		= sh_wdt_notify_sys,
+static const struct watchdog_ops sh_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= sh_wdt_start,
+	.stop		= sh_wdt_stop,
+	.ping		= sh_wdt_keepalive,
+	.set_timeout	= sh_wdt_set_heartbeat,
 };
 
-static struct miscdevice sh_wdt_miscdev = {
-	.minor		= WATCHDOG_MINOR,
-	.name		= "watchdog",
-	.fops		= &sh_wdt_fops,
+static struct watchdog_device sh_wdt_dev = {
+	.info	= &sh_wdt_info,
+	.ops	= &sh_wdt_ops,
 };
 
 static int __devinit sh_wdt_probe(struct platform_device *pdev)
@@ -347,39 +234,49 @@ static int __devinit sh_wdt_probe(struct platform_device *pdev)
 	if (unlikely(!res))
 		return -EINVAL;
 
-	if (!devm_request_mem_region(&pdev->dev, res->start,
-				     resource_size(res), DRV_NAME))
-		return -EBUSY;
-
 	wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL);
-	if (unlikely(!wdt)) {
-		rc = -ENOMEM;
-		goto out_release;
-	}
+	if (unlikely(!wdt))
+		return -ENOMEM;
 
 	wdt->dev = &pdev->dev;
 
-	wdt->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	wdt->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(wdt->clk)) {
+		/*
+		 * Clock framework support is optional, continue on
+		 * anyways if we don't find a matching clock.
+		 */
+		wdt->clk = NULL;
+	}
+
+	wdt->base = devm_request_and_ioremap(wdt->dev, res);
 	if (unlikely(!wdt->base)) {
-		rc = -ENXIO;
-		goto out_err;
+		rc = -EADDRNOTAVAIL;
+		goto err;
 	}
 
-	rc = register_reboot_notifier(&sh_wdt_notifier);
+	watchdog_set_nowayout(&sh_wdt_dev, nowayout);
+	watchdog_set_drvdata(&sh_wdt_dev, wdt);
+
+	spin_lock_init(&wdt->lock);
+
+	rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat);
 	if (unlikely(rc)) {
-		dev_err(&pdev->dev,
-			"Can't register reboot notifier (err=%d)\n", rc);
-		goto out_unmap;
+		/* Default timeout if invalid */
+		sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT);
+
+		dev_warn(&pdev->dev,
+			 "heartbeat value must be 1<=x<=3600, using %d\n",
+			 sh_wdt_dev.timeout);
 	}
 
-	sh_wdt_miscdev.parent = wdt->dev;
+	dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n",
+		 sh_wdt_dev.timeout, nowayout);
 
-	rc = misc_register(&sh_wdt_miscdev);
+	rc = watchdog_register_device(&sh_wdt_dev);
 	if (unlikely(rc)) {
-		dev_err(&pdev->dev,
-			"Can't register miscdev on minor=%d (err=%d)\n",
-						sh_wdt_miscdev.minor, rc);
-		goto out_unreg;
+		dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc);
+		goto err;
 	}
 
 	init_timer(&wdt->timer);
@@ -388,20 +285,15 @@ static int __devinit sh_wdt_probe(struct platform_device *pdev)
 	wdt->timer.expires	= next_ping_period(clock_division_ratio);
 
 	platform_set_drvdata(pdev, wdt);
-	sh_wdt_dev = pdev;
 
 	dev_info(&pdev->dev, "initialized.\n");
 
+	pm_runtime_enable(&pdev->dev);
+
 	return 0;
 
-out_unreg:
-	unregister_reboot_notifier(&sh_wdt_notifier);
-out_unmap:
-	devm_iounmap(&pdev->dev, wdt->base);
-out_err:
-	devm_kfree(&pdev->dev, wdt);
-out_release:
-	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
+err:
+	clk_put(wdt->clk);
 
 	return rc;
 }
@@ -409,36 +301,35 @@ out_release:
 static int __devexit sh_wdt_remove(struct platform_device *pdev)
 {
 	struct sh_wdt *wdt = platform_get_drvdata(pdev);
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	platform_set_drvdata(pdev, NULL);
 
-	misc_deregister(&sh_wdt_miscdev);
+	watchdog_unregister_device(&sh_wdt_dev);
 
-	sh_wdt_dev = NULL;
-
-	unregister_reboot_notifier(&sh_wdt_notifier);
-	devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
-	devm_iounmap(&pdev->dev, wdt->base);
-	devm_kfree(&pdev->dev, wdt);
+	pm_runtime_disable(&pdev->dev);
+	clk_put(wdt->clk);
 
 	return 0;
 }
 
+static void sh_wdt_shutdown(struct platform_device *pdev)
+{
+	sh_wdt_stop(&sh_wdt_dev);
+}
+
 static struct platform_driver sh_wdt_driver = {
 	.driver		= {
 		.name	= DRV_NAME,
 		.owner	= THIS_MODULE,
 	},
 
-	.probe	= sh_wdt_probe,
-	.remove	= __devexit_p(sh_wdt_remove),
+	.probe		= sh_wdt_probe,
+	.remove		= __devexit_p(sh_wdt_remove),
+	.shutdown	= sh_wdt_shutdown,
 };
 
 static int __init sh_wdt_init(void)
 {
-	int rc;
-
 	if (unlikely(clock_division_ratio < 0x5 ||
 		     clock_division_ratio > 0x7)) {
 		clock_division_ratio = WTCSR_CKS_4096;
@@ -447,17 +338,6 @@ static int __init sh_wdt_init(void)
 			clock_division_ratio);
 	}
 
-	rc = sh_wdt_set_heartbeat(heartbeat);
-	if (unlikely(rc)) {
-		heartbeat = WATCHDOG_HEARTBEAT;
-
-		pr_info("heartbeat value must be 1<=x<=3600, using %d\n",
-			heartbeat);
-	}
-
-	pr_info("configured with heartbeat=%d sec (nowayout=%d)\n",
-		heartbeat, nowayout);
-
 	return platform_driver_register(&sh_wdt_driver);
 }
 
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index ea20c51d24c7..8d2501e604dd 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -71,7 +71,7 @@ config XEN_DEV_EVTCHN
 	tristate "Xen /dev/xen/evtchn device"
 	default y
 	help
-	  The evtchn driver allows a userspace process to triger event
+	  The evtchn driver allows a userspace process to trigger event
 	  channels and to receive notification of an event channel
 	  firing.
 	  If in doubt, say yes.