diff options
Diffstat (limited to 'drivers')
240 files changed, 1668 insertions, 2665 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index d38f43f593d4..2f557f570ade 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -68,6 +68,8 @@ source "drivers/ssb/Kconfig" source "drivers/mfd/Kconfig" +source "drivers/regulator/Kconfig" + source "drivers/media/Kconfig" source "drivers/video/Kconfig" diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index aeadd00411a1..a67b8e7c712d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -49,6 +49,17 @@ #define DRV_NAME "ahci" #define DRV_VERSION "3.0" +/* Enclosure Management Control */ +#define EM_CTRL_MSG_TYPE 0x000f0000 + +/* Enclosure Management LED Message Type */ +#define EM_MSG_LED_HBA_PORT 0x0000000f +#define EM_MSG_LED_PMP_SLOT 0x0000ff00 +#define EM_MSG_LED_VALUE 0xffff0000 +#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000 +#define EM_MSG_LED_VALUE_OFF 0xfff80000 +#define EM_MSG_LED_VALUE_ON 0x00010000 + static int ahci_skip_host_reset; module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); @@ -588,6 +599,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ + /* Promise */ + { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, @@ -1220,18 +1234,20 @@ static void ahci_sw_activity_blink(unsigned long arg) struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; unsigned long led_message = emp->led_state; u32 activity_led_state; + unsigned long flags; - led_message &= 0xffff0000; + led_message &= EM_MSG_LED_VALUE; led_message |= ap->port_no | (link->pmp << 8); /* check to see if we've had activity. If so, * toggle state of LED and reset timer. If not, * turn LED to desired idle state. */ + spin_lock_irqsave(ap->lock, flags); if (emp->saved_activity != emp->activity) { emp->saved_activity = emp->activity; /* get the current LED state */ - activity_led_state = led_message & 0x00010000; + activity_led_state = led_message & EM_MSG_LED_VALUE_ON; if (activity_led_state) activity_led_state = 0; @@ -1239,17 +1255,18 @@ static void ahci_sw_activity_blink(unsigned long arg) activity_led_state = 1; /* clear old state */ - led_message &= 0xfff8ffff; + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; /* toggle state */ led_message |= (activity_led_state << 16); mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); } else { /* switch to idle */ - led_message &= 0xfff8ffff; + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; if (emp->blink_policy == BLINK_OFF) led_message |= (1 << 16); } + spin_unlock_irqrestore(ap->lock, flags); ahci_transmit_led_message(ap, led_message, 4); } @@ -1294,7 +1311,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, struct ahci_em_priv *emp; /* get the slot number from the message */ - pmp = (state & 0x0000ff00) >> 8; + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; if (pmp < MAX_SLOTS) emp = &pp->em_priv[pmp]; else @@ -1319,7 +1336,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, message[0] |= (4 << 8); /* ignore 0:4 of byte zero, fill in port info yourself */ - message[1] = ((state & 0xfffffff0) | ap->port_no); + message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no); /* write message to EM_LOC */ writel(message[0], mmio + hpriv->em_loc); @@ -1362,7 +1379,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, state = simple_strtoul(buf, NULL, 0); /* get the slot number from the message */ - pmp = (state & 0x0000ff00) >> 8; + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; if (pmp < MAX_SLOTS) emp = &pp->em_priv[pmp]; else @@ -1373,7 +1390,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, * activity led through em_message */ if (emp->blink_policy) - state &= 0xfff8ffff; + state &= ~EM_MSG_LED_VALUE_ACTIVITY; return ahci_transmit_led_message(ap, state, size); } @@ -1392,16 +1409,16 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); /* set the LED to OFF */ - port_led_state &= 0xfff80000; + port_led_state &= EM_MSG_LED_VALUE_OFF; port_led_state |= (ap->port_no | (link->pmp << 8)); ahci_transmit_led_message(ap, port_led_state, 4); } else { link->flags |= ATA_LFLAG_SW_ACTIVITY; if (val == BLINK_OFF) { /* set LED to ON for idle */ - port_led_state &= 0xfff80000; + port_led_state &= EM_MSG_LED_VALUE_OFF; port_led_state |= (ap->port_no | (link->pmp << 8)); - port_led_state |= 0x00010000; /* check this */ + port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ ahci_transmit_led_message(ap, port_led_state, 4); } } @@ -2612,7 +2629,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) u32 em_loc = readl(mmio + HOST_EM_LOC); u32 em_ctl = readl(mmio + HOST_EM_CTL); - messages = (em_ctl & 0x000f0000) >> 16; + messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16; /* we only support LED message type right now */ if ((messages & 0x01) && (ahci_em_messages == 1)) { diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 75a406f5e694..5c33767e66de 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -1,6 +1,6 @@ /* * ata_generic.c - Generic PATA/SATA controller driver. - * Copyright 2005 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005 Red Hat Inc, all rights reserved. * * Elements from ide/pci/generic.c * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index e9e32ed6b1a3..8e37be19bbf5 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -14,7 +14,7 @@ * * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2003 Red Hat Inc * * * This program is free software; you can redistribute it and/or modify @@ -738,7 +738,6 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev) * do_pata_set_dmamode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring * @adev: Drive in question - * @udma: udma mode, 0 - 6 * @isich: set if the chip is an ICH device * * Set UDMA mode for device, in host controller PCI config space. diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8cb0b360bfd8..82af7011f2dd 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1268,7 +1268,7 @@ u64 ata_tf_to_lba48(const struct ata_taskfile *tf) sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40; sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32; - sectors |= (tf->hob_lbal & 0xff) << 24; + sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24; sectors |= (tf->lbah & 0xff) << 16; sectors |= (tf->lbam & 0xff) << 8; sectors |= (tf->lbal & 0xff); @@ -1602,7 +1602,6 @@ unsigned long ata_id_xfermask(const u16 *id) /** * ata_pio_queue_task - Queue port_task * @ap: The ata_port to queue port_task for - * @fn: workqueue function to be scheduled * @data: data for @fn to use * @delay: delay time in msecs for workqueue function * @@ -2159,6 +2158,10 @@ retry: static inline u8 ata_dev_knobble(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; + + if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK) + return 0; + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); } @@ -4063,6 +4066,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, }, { "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, }, + /* Devices that do not need bridging limits applied */ + { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + /* End Marker */ { } }; @@ -4156,29 +4162,33 @@ static int cable_is_40wire(struct ata_port *ap) struct ata_link *link; struct ata_device *dev; - /* If the controller thinks we are 40 wire, we are */ + /* If the controller thinks we are 40 wire, we are. */ if (ap->cbl == ATA_CBL_PATA40) return 1; - /* If the controller thinks we are 80 wire, we are */ + + /* If the controller thinks we are 80 wire, we are. */ if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA) return 0; - /* If the system is known to be 40 wire short cable (eg laptop), - then we allow 80 wire modes even if the drive isn't sure */ + + /* If the system is known to be 40 wire short cable (eg + * laptop), then we allow 80 wire modes even if the drive + * isn't sure. + */ if (ap->cbl == ATA_CBL_PATA40_SHORT) return 0; - /* If the controller doesn't know we scan - - - Note: We look for all 40 wire detects at this point. - Any 80 wire detect is taken to be 80 wire cable - because - - In many setups only the one drive (slave if present) - will give a valid detect - - If you have a non detect capable drive you don't - want it to colour the choice - */ + + /* If the controller doesn't know, we scan. + * + * Note: We look for all 40 wire detects at this point. Any + * 80 wire detect is taken to be 80 wire cable because + * - in many setups only the one drive (slave if present) will + * give a valid detect + * - if you have a non detect capable drive you don't want it + * to colour the choice + */ ata_port_for_each_link(link, ap) { ata_link_for_each_dev(dev, link) { - if (!ata_is_40wire(dev)) + if (ata_dev_enabled(dev) && !ata_is_40wire(dev)) return 0; } } @@ -4553,6 +4563,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure + * @tag: command tag * * LOCKING: * None. @@ -4643,7 +4654,6 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc) /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete - * @err_mask: ATA Status register contents * * Indicate to the mid and upper layers that an ATA * command has completed, with either an ok or not-ok status. diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 5d687d7cffae..8077bdf5d30d 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -603,6 +603,9 @@ void ata_scsi_error(struct Scsi_Host *host) ata_link_for_each_dev(dev, link) { int devno = dev->devno; + if (!ata_dev_enabled(dev)) + continue; + ehc->saved_xfer_mode[devno] = dev->xfer_mode; if (ata_ncq_enabled(dev)) ehc->saved_ncq_enabled |= 1 << devno; @@ -1161,6 +1164,7 @@ void ata_eh_detach_dev(struct ata_device *dev) { struct ata_link *link = dev->link; struct ata_port *ap = link->ap; + struct ata_eh_context *ehc = &link->eh_context; unsigned long flags; ata_dev_disable(dev); @@ -1174,9 +1178,11 @@ void ata_eh_detach_dev(struct ata_device *dev) ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; } - /* clear per-dev EH actions */ + /* clear per-dev EH info */ ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK); ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK); + ehc->saved_xfer_mode[dev->devno] = 0; + ehc->saved_ncq_enabled &= ~(1 << dev->devno); spin_unlock_irqrestore(ap->lock, flags); } @@ -2787,6 +2793,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) /* if data transfer is verified, clear DUBIOUS_XFER on ering top */ ata_link_for_each_dev(dev, link) { + if (!ata_dev_enabled(dev)) + continue; + if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) { struct ata_ering_entry *ent; @@ -2808,6 +2817,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno]; u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno)); + if (!ata_dev_enabled(dev)) + continue; + if (dev->xfer_mode != saved_xfer_mode || ata_ncq_enabled(dev) != saved_ncq) dev->flags |= ATA_DFLAG_DUBIOUS_XFER; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 4b95c4387e9e..bbb30d882f05 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1107,6 +1107,15 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); depth = min(ATA_MAX_QUEUE - 1, depth); + + /* + * If this device is behind a port multiplier, we have + * to share the tag map between all devices on that PMP. + * Set up the shared tag map here and we get automatic. + */ + if (dev->link->ap->pmp_link) + scsi_init_shared_tag_map(sdev->host, ATA_MAX_QUEUE - 1); + scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); scsi_activate_tcq(sdev, depth); } diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index eb919c16a03e..e2e332d8ff95 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -1,7 +1,7 @@ /* * ACPI PATA driver * - * (c) 2007 Red Hat <alan@redhat.com> + * (c) 2007 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 5ca70fa1f587..73c466e452ca 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -1,7 +1,6 @@ /* * pata_ali.c - ALI 15x3 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based in part upon * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 57dd00f463d3..0ec9c7d9fe9d 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -1,7 +1,6 @@ /* * pata_amd.c - AMD PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on pata-sil680. Errata information is taken from data sheets * and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 0f513bc11193..6b3092c75ffe 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -1,7 +1,7 @@ /* * pata_artop.c - ARTOP ATA controller driver * - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on drivers/ide/pci/aec62xx.c diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index e8a0d99d7356..0e2cde8f9973 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -1,7 +1,6 @@ /* * pata_atiixp.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on * diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 2de30b990278..34a394264c3d 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -1,7 +1,6 @@ /* * pata_cmd640.c - CMD640 PCI PATA for new ATA layer * (C) 2007 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based upon * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index ddd09b7d98c9..3167d8fed2f2 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -1,7 +1,7 @@ /* * pata_cmd64x.c - CMD64x PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * Based upon * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 0c4b271a9d5a..bba453381f44 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -1,7 +1,6 @@ /* * pata-cs5530.c - CS5530 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon cs5530.c by Mark Lord. * diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index f1b6556f0483..1b2d4a0f5f74 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -1,7 +1,7 @@ /* * pata-cs5535.c - CS5535 PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 2ff62608ae37..d546425cd380 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -1,7 +1,7 @@ /* * pata_cypress.c - Cypress PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox * * Based heavily on * linux/drivers/ide/pci/cy82c693.c Version 0.40 Sep. 10, 2002 diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 9fba82976ba6..ac6392ea35b0 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -1,7 +1,7 @@ /* * pata_efar.c - EFAR PIIX clone controller driver * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 6a111baab523..15cdb9148aab 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -1,7 +1,7 @@ /* * pata-isapnp.c - ISA PnP PATA controller driver. - * Copyright 2005/2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005/2006 Red Hat Inc, all rights reserved. * * Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru> */ diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 0221c9a46769..860ede526282 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -1,7 +1,7 @@ /* * pata_it821x.c - IT821x PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * (C) 2007 Bartlomiej Zolnierkiewicz * * based upon @@ -10,7 +10,7 @@ * * linux/drivers/ide/pci/it821x.c Version 0.09 December 2004 * - * Copyright (C) 2004 Red Hat <alan@redhat.com> + * Copyright (C) 2004 Red Hat * * May be copied or modified under the terms of the GNU General Public License * Based in part on the ITE vendor provided SCSI driver. @@ -557,9 +557,8 @@ static unsigned int it821x_read_id(struct ata_device *adev, if (strstr(model_num, "Integrated Technology Express")) { /* Set feature bits the firmware neglects */ id[49] |= 0x0300; /* LBA, DMA */ - id[82] |= 0x0400; /* LBA48 */ id[83] &= 0x7FFF; - id[83] |= 0x4000; /* Word 83 is valid */ + id[83] |= 0x4400; /* Word 83 is valid and LBA48 */ id[86] |= 0x0400; /* LBA48 on */ id[ATA_ID_MAJOR_VER] |= 0x1F; } diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 73b7596816b4..38cf1ab2d289 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -4,7 +4,7 @@ * driven by AHCI in the usual configuration although * this driver can handle other setups if we need it. * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index bc037ffce200..930c2208640b 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -1,6 +1,6 @@ /* * pata-legacy.c - Legacy port PATA/SATA controller driver. - * Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved. + * Copyright 2005/2006 Red Hat, all rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 0d87eec84966..76e399bf8c1b 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -5,7 +5,7 @@ * isn't making full use of the device functionality but it is * easy to get working. * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 7d7e3fdab71f..7c8faa48b5f3 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -1,7 +1,7 @@ /* * pata_mpiix.c - Intel MPIIX PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * The MPIIX is different enough to the PIIX4 and friends that we give it * a separate driver. The old ide/pci code handles this by just not tuning diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index d9719c8b9dbe..9dc05e1656a8 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -1,7 +1,7 @@ /* * pata_netcell.c - Netcell PATA driver * - * (c) 2006 Red Hat <alan@redhat.com> + * (c) 2006 Red Hat */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 565e67cd13fa..4e466eae8b46 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -1,7 +1,6 @@ /* * pata_ninja32.c - Ninja32 PATA for new ATA layer * (C) 2007 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Note: The controller like many controllers has shared timings for * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back @@ -45,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.0.1" +#define DRV_VERSION "0.1.1" /** @@ -89,6 +88,17 @@ static struct ata_port_operations ninja32_port_ops = { .set_piomode = ninja32_set_piomode, }; +static void ninja32_program(void __iomem *base) +{ + iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ + iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ + iowrite8(0x01, base + 0x03); /* Unknown */ + iowrite8(0x20, base + 0x04); /* WAIT0 */ + iowrite8(0x8f, base + 0x05); /* Unknown */ + iowrite8(0xa4, base + 0x1c); /* Unknown */ + iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ +} + static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct ata_host *host; @@ -134,18 +144,28 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.bmdma_addr = base; ata_sff_std_ports(&ap->ioaddr); - iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ - iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */ - iowrite8(0x01, base + 0x03); /* Unknown */ - iowrite8(0x20, base + 0x04); /* WAIT0 */ - iowrite8(0x8f, base + 0x05); /* Unknown */ - iowrite8(0xa4, base + 0x1c); /* Unknown */ - iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */ + ninja32_program(base); /* FIXME: Should we disable them at remove ? */ return ata_host_activate(host, dev->irq, ata_sff_interrupt, IRQF_SHARED, &ninja32_sht); } +#ifdef CONFIG_PM + +static int ninja32_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + ninja32_program(host->iomap[0]); + ata_host_resume(host); + return 0; +} +#endif + static const struct pci_device_id ninja32[] = { { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, @@ -156,7 +176,11 @@ static struct pci_driver ninja32_pci_driver = { .name = DRV_NAME, .id_table = ninja32, .probe = ninja32_init_one, - .remove = ata_pci_remove_one + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ninja32_reinit_one, +#endif }; static int __init ninja32_init(void) diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index be756b7ef07e..40d411c460de 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -1,7 +1,6 @@ /* * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index e0aa7eaaee0a..89bf5f865d6a 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -1,7 +1,7 @@ /* * pata_ns87415.c - NS87415 (non PARISC) PATA * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat <alan@lxorguk.ukuu.org.uk> * * This is a fairly generic MWDMA controller. It has some limitations * as it requires timing reloads on PIO/DMA transitions but it is otherwise diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index df64f2443001..c0dbc46a348e 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -1,7 +1,7 @@ /* * pata_oldpiix.c - Intel PATA/SATA controllers * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index fb2cf661b0e8..e4fa4d565e96 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -1,7 +1,6 @@ /* * pata_opti.c - ATI PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based on * linux/drivers/ide/pci/opti621.c Version 0.7 Sept 10, 2002 diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 4cd744456313..93bb6e91973f 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -1,7 +1,6 @@ /* * pata_optidma.c - Opti DMA PATA for new ATA layer * (C) 2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * The Opti DMA controllers are related to the older PIO PCI controllers * and indeed the VLB ones. The main differences are that the timing diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 02b596b9cf6a..271cb64d429e 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -1,6 +1,6 @@ /* * pata_pcmcia.c - PCMCIA PATA controller driver. - * Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005-2006 Red Hat Inc, all rights reserved. * PCMCIA ident update Copyright 2006 Marcin Juszkiewicz * <openembedded@hrw.one.pl> * diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index d2673060bc8d..799a6a098712 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -1,7 +1,7 @@ /* * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/pdc202xx_old.c diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 8f65ad61b8af..77e4e3b17f54 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -5,7 +5,7 @@ * * Based on pata_pcmcia: * - * Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005-2006 Red Hat Inc, all rights reserved. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 63b7a1c165a5..3080f371222c 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -1,6 +1,6 @@ /* * pata_qdi.c - QDI VLB ATA controllers - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * * This driver mostly exists as a proof of concept for non PCI devices under * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 1c0d9fa7ee54..0b0aa452de14 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -1,7 +1,7 @@ /* * pata_radisys.c - Intel PATA/SATA controllers * - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat <alan@lxorguk.ukuu.org.uk> * * Some parts based on ata_piix.c by Jeff Garzik and others. * diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 0278fd2b8fb1..9a4bdca54616 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -1,5 +1,5 @@ /* - * New ATA layer SC1200 driver Alan Cox <alan@redhat.com> + * New ATA layer SC1200 driver Alan Cox <alan@lxorguk.ukuu.org.uk> * * TODO: Mode selection filtering * TODO: Can't enable second channel until ATA core has serialize diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 16673d168573..cf3707e516a2 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -8,7 +8,7 @@ * Copyright 2003-2005 Jeff Garzik * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2003 Red Hat Inc * * and drivers/ata/ahci.c: * Copyright 2004-2005 Red Hat, Inc. diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index ffd26d0dc50d..72e41c9f969b 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -1,7 +1,6 @@ /* * pata_serverworks.c - Serverworks PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon * diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index a598bb36aafc..83580a59db58 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -1,7 +1,6 @@ /* * pata_sil680.c - SIL680 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * based upon * diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 26345d7b531c..d34236611752 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -1,7 +1,7 @@ /* * pata_sis.c - SiS ATA driver * - * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2005 Red Hat * (C) 2007 Bartlomiej Zolnierkiewicz * * Based upon linux/drivers/ide/pci/sis5513.c diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 69877bd81815..1b0e7b6d8ef5 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -1,7 +1,6 @@ /* * pata_sl82c105.c - SL82C105 PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Based in part on linux/drivers/ide/pci/sl82c105.c * SL82C105/Winbond 553 IDE driver diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index b181261f2743..ef9597517cdd 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -1,7 +1,7 @@ /* * pata_triflex.c - Compaq PATA for new ATA layer * (C) 2005 Red Hat Inc - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * based upon * diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 8fdb2ce73210..681169c9c640 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -1,7 +1,6 @@ /* * pata_via.c - VIA PATA for new ATA layer * (C) 2005-2006 Red Hat Inc - * Alan Cox <alan@redhat.com> * * Documentation * Most chipset documentation available under NDA only diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index a7606b044a61..319e164a3d74 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -1,6 +1,6 @@ /* * pata_winbond.c - Winbond VLB ATA controllers - * (C) 2006 Red Hat <alan@redhat.com> + * (C) 2006 Red Hat * * Support for the Winbond 83759A when operating in advanced mode. * Multichip mode is not currently supported. diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 4621807a1a6a..ccee930f1e12 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -1329,6 +1329,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } + /* Set max read request size to 4096. This slightly increases + * write throughput for pci-e variants. + */ + pcie_set_readrq(pdev, 4096); + sil24_init_controller(host); pci_set_master(pdev); diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 5b72e734300a..62367fe4d5dc 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -44,11 +44,16 @@ #include <linux/libata.h> #define DRV_NAME "sata_via" -#define DRV_VERSION "2.3" +#define DRV_VERSION "2.4" +/* + * vt8251 is different from other sata controllers of VIA. It has two + * channels, each channel has both Master and Slave slot. + */ enum board_ids_enum { vt6420, vt6421, + vt8251, }; enum { @@ -70,6 +75,8 @@ enum { static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val); +static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val); static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); static void svia_noop_freeze(struct ata_port *ap); static int vt6420_prereset(struct ata_link *link, unsigned long deadline); @@ -79,12 +86,12 @@ static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); static const struct pci_device_id svia_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x5337), vt6420 }, - { PCI_VDEVICE(VIA, 0x0591), vt6420 }, - { PCI_VDEVICE(VIA, 0x3149), vt6420 }, - { PCI_VDEVICE(VIA, 0x3249), vt6421 }, - { PCI_VDEVICE(VIA, 0x5287), vt6420 }, + { PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */ + { PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */ + { PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */ { PCI_VDEVICE(VIA, 0x5372), vt6420 }, { PCI_VDEVICE(VIA, 0x7372), vt6420 }, + { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ { } /* terminate list */ }; @@ -128,6 +135,13 @@ static struct ata_port_operations vt6421_sata_ops = { .scr_write = svia_scr_write, }; +static struct ata_port_operations vt8251_ops = { + .inherits = &svia_base_ops, + .hardreset = sata_std_hardreset, + .scr_read = vt8251_scr_read, + .scr_write = vt8251_scr_write, +}; + static const struct ata_port_info vt6420_port_info = { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, .pio_mask = 0x1f, @@ -152,6 +166,15 @@ static struct ata_port_info vt6421_pport_info = { .port_ops = &vt6421_pata_ops, }; +static struct ata_port_info vt8251_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS | + ATA_FLAG_NO_LEGACY, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, + .port_ops = &vt8251_ops, +}; + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers"); MODULE_LICENSE("GPL"); @@ -174,6 +197,83 @@ static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } +static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val) +{ + static const u8 ipm_tbl[] = { 1, 2, 6, 0 }; + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + u8 raw; + + switch (scr) { + case SCR_STATUS: + pci_read_config_byte(pdev, 0xA0 + slot, &raw); + + /* read the DET field, bit0 and 1 of the config byte */ + v |= raw & 0x03; + + /* read the SPD field, bit4 of the configure byte */ + if (raw & (1 << 4)) + v |= 0x02 << 4; + else + v |= 0x01 << 4; + + /* read the IPM field, bit2 and 3 of the config byte */ + v |= ipm_tbl[(raw >> 2) & 0x3]; + break; + + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x5287); + pci_read_config_dword(pdev, 0xB0 + slot * 4, &v); + break; + + case SCR_CONTROL: + pci_read_config_byte(pdev, 0xA4 + slot, &raw); + + /* read the DET field, bit0 and bit1 */ + v |= ((raw & 0x02) << 1) | (raw & 0x01); + + /* read the IPM field, bit2 and bit3 */ + v |= ((raw >> 2) & 0x03) << 8; + break; + + default: + return -EINVAL; + } + + *val = v; + return 0; +} + +static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + + switch (scr) { + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x5287); + pci_write_config_dword(pdev, 0xB0 + slot * 4, val); + return 0; + + case SCR_CONTROL: + /* set the DET field */ + v |= ((val & 0x4) >> 1) | (val & 0x1); + + /* set the IPM field */ + v |= ((val >> 8) & 0x3) << 2; + + pci_write_config_byte(pdev, 0xA4 + slot, v); + return 0; + + default: + return -EINVAL; + } +} + /** * svia_tf_load - send taskfile registers to host controller * @ap: Port to which output is sent @@ -396,6 +496,30 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) return 0; } +static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL }; + struct ata_host *host; + int i, rc; + + rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + if (rc) + return rc; + *r_host = host; + + rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n"); + return rc; + } + + /* 8251 hosts four sata ports as M/S of the two channels */ + for (i = 0; i < host->n_ports; i++) + ata_slave_link_init(host->ports[i]); + + return 0; +} + static void svia_configure(struct pci_dev *pdev) { u8 tmp8; @@ -451,10 +575,10 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - if (board_id == vt6420) - bar_sizes = &svia_bar_sizes[0]; - else + if (board_id == vt6421) bar_sizes = &vt6421_bar_sizes[0]; + else + bar_sizes = &svia_bar_sizes[0]; for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++) if ((pci_resource_start(pdev, i) == 0) || @@ -467,12 +591,19 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; } - if (board_id == vt6420) + switch (board_id) { + case vt6420: rc = vt6420_prepare_host(pdev, &host); - else + break; + case vt6421: rc = vt6421_prepare_host(pdev, &host); - if (rc) - return rc; + break; + case vt8251: + rc = vt8251_prepare_host(pdev, &host); + break; + default: + return -EINVAL; + } svia_configure(pdev); diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 75dd6e22faff..c98c31ec2f75 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -355,7 +355,7 @@ static void __sysdev_resume(struct sys_device *dev) * sysdev_suspend - Suspend all system devices. * @state: Power state to enter. * - * We perform an almost identical operation as sys_device_shutdown() + * We perform an almost identical operation as sysdev_shutdown() * above, though calling ->suspend() instead. Interrupts are disabled * when this called. Devices are responsible for both saving state and * quiescing or powering down the device. @@ -437,7 +437,7 @@ aux_driver: /** * sysdev_resume - Bring system devices back to life. * - * Similar to sys_device_suspend(), but we iterate the list forwards + * Similar to sysdev_suspend(), but we iterate the list forwards * to guarantee that parent devices are resumed before their children. * * Note: Interrupts are disabled when called. @@ -488,7 +488,8 @@ ssize_t sysdev_store_ulong(struct sys_device *sysdev, if (end == buf) return -EINVAL; *(unsigned long *)(ea->var) = new; - return end - buf; + /* Always return full write size even if we didn't consume all */ + return size; } EXPORT_SYMBOL_GPL(sysdev_store_ulong); @@ -511,7 +512,8 @@ ssize_t sysdev_store_int(struct sys_device *sysdev, if (end == buf || new > INT_MAX || new < INT_MIN) return -EINVAL; *(int *)(ea->var) = new; - return end - buf; + /* Always return full write size even if we didn't consume all */ + return size; } EXPORT_SYMBOL_GPL(sysdev_store_int); diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 3f09cd8bcc38..5c4ee70d5cf3 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -40,8 +40,7 @@ * Heinz Mauelshagen <mge@sistina.com>, Feb 2002 * * Support for falling back on the write file operation when the address space - * operations prepare_write and/or commit_write are not available on the - * backing filesystem. + * operations write_begin is not available on the backing filesystem. * Anton Altaparmakov, 16 Feb 2005 * * Still To Fix: @@ -765,7 +764,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, */ if (!file->f_op->splice_read) goto out_putf; - if (aops->prepare_write || aops->write_begin) + if (aops->write_begin) lo_flags |= LO_FLAGS_USE_AOPS; if (!(lo_flags & LO_FLAGS_USE_AOPS) && !file->f_op->write) lo_flags |= LO_FLAGS_READ_ONLY; diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index e6ee21d99d92..b0e569ba730d 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -867,7 +867,7 @@ static int bluecard_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = bluecard_interrupt; diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index 32f3a8ed8d3d..b936d8ce2728 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -443,8 +443,8 @@ static void bpa10x_destruct(struct hci_dev *hdev) BT_DBG("%s", hdev->name); - kfree(data->rx_skb[0]); - kfree(data->rx_skb[1]); + kfree_skb(data->rx_skb[0]); + kfree_skb(data->rx_skb[1]); kfree(data); } diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 2cbe70b66470..b3e4d07a4ac2 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -343,6 +343,7 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) bt3c_info_t *info = dev_inst; unsigned int iobase; int iir; + irqreturn_t r = IRQ_NONE; BUG_ON(!info->hdev); @@ -374,11 +375,12 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst) outb(iir, iobase + CONTROL); } + r = IRQ_HANDLED; } spin_unlock(&(info->lock)); - return IRQ_HANDLED; + return r; } @@ -657,7 +659,7 @@ static int bt3c_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = bt3c_interrupt; diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c index 58630cc1eff2..cda6c7cc944b 100644 --- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -152,7 +152,7 @@ static int btsdio_rx_packet(struct btsdio_data *data) err = sdio_readsb(data->func, skb->data, REG_RDAT, len - 4); if (err < 0) { - kfree(skb); + kfree_skb(skb); return err; } diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 8e556b7ff9f6..efd689a062eb 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -293,6 +293,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) unsigned int iobase; int boguscount = 0; int iir, lsr; + irqreturn_t r = IRQ_NONE; BUG_ON(!info->hdev); @@ -302,6 +303,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) iir = inb(iobase + UART_IIR) & UART_IIR_ID; while (iir) { + r = IRQ_HANDLED; /* Clear interrupt */ lsr = inb(iobase + UART_LSR); @@ -335,7 +337,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst) spin_unlock(&(info->lock)); - return IRQ_HANDLED; + return r; } @@ -586,7 +588,7 @@ static int btuart_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = btuart_interrupt; diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index e6e6b037695a..901bdd95655f 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -297,6 +297,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) unsigned char msr; int boguscount = 0; int iir, lsr; + irqreturn_t r = IRQ_NONE; BUG_ON(!info->hdev); @@ -307,6 +308,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) iir = inb(iobase + UART_IIR) & UART_IIR_ID; while (iir) { + r = IRQ_HANDLED; /* Clear interrupt */ lsr = inb(iobase + UART_LSR); @@ -343,11 +345,12 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst) info->ri_latch = msr & UART_MSR_RI; clear_bit(XMIT_WAITING, &(info->tx_state)); dtl1_write_wakeup(info); + r = IRQ_HANDLED; } spin_unlock(&(info->lock)); - return IRQ_HANDLED; + return r; } @@ -568,7 +571,7 @@ static int dtl1_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts1 = 8; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = dtl1_interrupt; diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index 9aaa86b232b1..2eecb779437b 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -495,9 +495,10 @@ static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode) return cdrom_open(gd.cd_info, bdev, mode); } -static int gdrom_bdops_release(struct block_device *bdev, fmode_t mode) +static int gdrom_bdops_release(struct gendisk *disk, fmode_t mode) { - return cdrom_release(gd.cd_info, mode); + cdrom_release(gd.cd_info, mode); + return 0; } static int gdrom_bdops_mediachanged(struct gendisk *disk) diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 122254155ae1..43b35d0369d6 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -812,28 +812,6 @@ config JS_RTC To compile this driver as a module, choose M here: the module will be called js-rtc. -config SGI_DS1286 - tristate "SGI DS1286 RTC support" - depends on SGI_HAS_DS1286 - help - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock built into your computer. - Every SGI has such a clock built in. It reports status information - via the file /proc/rtc and its behaviour is set by various ioctls on - /dev/rtc. - -config SGI_IP27_RTC - bool "SGI M48T35 RTC support" - depends on SGI_IP27 - help - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock built into your computer. - Every SGI has such a clock built in. It reports status information - via the file /proc/rtc and its behaviour is set by various ioctls on - /dev/rtc. - config GEN_RTC tristate "Generic /dev/rtc emulation" depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 1a4247dccac4..438f71317c5c 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -74,8 +74,6 @@ obj-$(CONFIG_RTC) += rtc.o obj-$(CONFIG_HPET) += hpet.o obj-$(CONFIG_GEN_RTC) += genrtc.o obj-$(CONFIG_EFI_RTC) += efirtc.o -obj-$(CONFIG_SGI_DS1286) += ds1286.o -obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o obj-$(CONFIG_DS1302) += ds1302.o obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap/ ifeq ($(CONFIG_GENERIC_NVRAM),y) diff --git a/drivers/char/ds1286.c b/drivers/char/ds1286.c deleted file mode 100644 index 0a826d7be10e..000000000000 --- a/drivers/char/ds1286.c +++ /dev/null @@ -1,585 +0,0 @@ -/* - * DS1286 Real Time Clock interface for Linux - * - * Copyright (C) 1998, 1999, 2000 Ralf Baechle - * - * Based on code written by Paul Gortmaker. - * - * This driver allows use of the real time clock (built into nearly all - * computers) from user space. It exports the /dev/rtc interface supporting - * various ioctl() and also the /proc/rtc pseudo-file for status - * information. - * - * The ioctls can be used to set the interrupt behaviour and generation rate - * from the RTC via IRQ 8. Then the /dev/rtc interface can be used to make - * use of these timer interrupts, be they interval or alarm based. - * - * The /dev/rtc interface will block on reads until an interrupt has been - * received. If a RTC interrupt has already happened, it will output an - * unsigned long and then block. The output value contains the interrupt - * status in the low byte and the number of interrupts since the last read - * in the remaining high bytes. The /dev/rtc interface can also be used with - * the select(2) call. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/ds1286.h> -#include <linux/smp_lock.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/miscdevice.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/fcntl.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/rtc.h> -#include <linux/spinlock.h> -#include <linux/bcd.h> -#include <linux/proc_fs.h> -#include <linux/jiffies.h> - -#include <asm/uaccess.h> -#include <asm/system.h> - -#define DS1286_VERSION "1.0" - -/* - * We sponge a minor off of the misc major. No need slurping - * up another valuable major dev number for this. If you add - * an ioctl, make sure you don't conflict with SPARC's RTC - * ioctls. - */ - -static DECLARE_WAIT_QUEUE_HEAD(ds1286_wait); - -static ssize_t ds1286_read(struct file *file, char *buf, - size_t count, loff_t *ppos); - -static int ds1286_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); - -static unsigned int ds1286_poll(struct file *file, poll_table *wait); - -static void ds1286_get_alm_time (struct rtc_time *alm_tm); -static void ds1286_get_time(struct rtc_time *rtc_tm); -static int ds1286_set_time(struct rtc_time *rtc_tm); - -static inline unsigned char ds1286_is_updating(void); - -static DEFINE_SPINLOCK(ds1286_lock); - -static int ds1286_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data); - -/* - * Bits in rtc_status. (7 bits of room for future expansion) - */ - -#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ -#define RTC_TIMER_ON 0x02 /* missed irq timer active */ - -static unsigned char ds1286_status; /* bitmapped status byte. */ - -static unsigned char days_in_mo[] = { - 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 -}; - -/* - * Now all the various file operations that we export. - */ - -static ssize_t ds1286_read(struct file *file, char *buf, - size_t count, loff_t *ppos) -{ - return -EIO; -} - -static int ds1286_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct rtc_time wtime; - - switch (cmd) { - case RTC_AIE_OFF: /* Mask alarm int. enab. bit */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val |= RTC_TDM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_AIE_ON: /* Allow alarm interrupts. */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val &= ~RTC_TDM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_WIE_OFF: /* Mask watchdog int. enab. bit */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val |= RTC_WAM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_WIE_ON: /* Allow watchdog interrupts. */ - { - unsigned long flags; - unsigned char val; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - spin_lock_irqsave(&ds1286_lock, flags); - val = rtc_read(RTC_CMD); - val &= ~RTC_WAM; - rtc_write(val, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; - } - case RTC_ALM_READ: /* Read the present alarm time */ - { - /* - * This returns a struct rtc_time. Reading >= 0xc0 - * means "don't care" or "match all". Only the tm_hour, - * tm_min, and tm_sec values are filled in. - */ - - memset(&wtime, 0, sizeof(wtime)); - ds1286_get_alm_time(&wtime); - break; - } - case RTC_ALM_SET: /* Store a time into the alarm */ - { - /* - * This expects a struct rtc_time. Writing 0xff means - * "don't care" or "match all". Only the tm_hour, - * tm_min and tm_sec are used. - */ - unsigned char hrs, min, sec; - struct rtc_time alm_tm; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&alm_tm, (struct rtc_time*)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - hrs = alm_tm.tm_hour; - min = alm_tm.tm_min; - sec = alm_tm.tm_sec; - - if (hrs >= 24) - hrs = 0xff; - - if (min >= 60) - min = 0xff; - - if (sec != 0) - return -EINVAL; - - min = bin2bcd(min); - min = bin2bcd(hrs); - - spin_lock(&ds1286_lock); - rtc_write(hrs, RTC_HOURS_ALARM); - rtc_write(min, RTC_MINUTES_ALARM); - spin_unlock(&ds1286_lock); - - return 0; - } - case RTC_RD_TIME: /* Read the time/date from RTC */ - { - memset(&wtime, 0, sizeof(wtime)); - ds1286_get_time(&wtime); - break; - } - case RTC_SET_TIME: /* Set the RTC */ - { - struct rtc_time rtc_tm; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - return ds1286_set_time(&rtc_tm); - } - default: - return -EINVAL; - } - return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; -} - -/* - * We enforce only one user at a time here with the open/close. - * Also clear the previous interrupt data on an open, and clean - * up things on a close. - */ - -static int ds1286_open(struct inode *inode, struct file *file) -{ - lock_kernel(); - spin_lock_irq(&ds1286_lock); - - if (ds1286_status & RTC_IS_OPEN) - goto out_busy; - - ds1286_status |= RTC_IS_OPEN; - - spin_unlock_irq(&ds1286_lock); - unlock_kernel(); - return 0; - -out_busy: - spin_lock_irq(&ds1286_lock); - unlock_kernel(); - return -EBUSY; -} - -static int ds1286_release(struct inode *inode, struct file *file) -{ - ds1286_status &= ~RTC_IS_OPEN; - - return 0; -} - -static unsigned int ds1286_poll(struct file *file, poll_table *wait) -{ - poll_wait(file, &ds1286_wait, wait); - - return 0; -} - -/* - * The various file operations we support. - */ - -static const struct file_operations ds1286_fops = { - .llseek = no_llseek, - .read = ds1286_read, - .poll = ds1286_poll, - .ioctl = ds1286_ioctl, - .open = ds1286_open, - .release = ds1286_release, -}; - -static struct miscdevice ds1286_dev= -{ - .minor = RTC_MINOR, - .name = "rtc", - .fops = &ds1286_fops, -}; - -static int __init ds1286_init(void) -{ - int err; - - printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION); - - err = misc_register(&ds1286_dev); - if (err) - goto out; - - if (!create_proc_read_entry("driver/rtc", 0, 0, ds1286_read_proc, NULL)) { - err = -ENOMEM; - - goto out_deregister; - } - - return 0; - -out_deregister: - misc_deregister(&ds1286_dev); - -out: - return err; -} - -static void __exit ds1286_exit(void) -{ - remove_proc_entry("driver/rtc", NULL); - misc_deregister(&ds1286_dev); -} - -static char *days[] = { - "***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" -}; - -/* - * Info exported via "/proc/rtc". - */ -static int ds1286_proc_output(char *buf) -{ - char *p, *s; - struct rtc_time tm; - unsigned char hundredth, month, cmd, amode; - - p = buf; - - ds1286_get_time(&tm); - hundredth = rtc_read(RTC_HUNDREDTH_SECOND); - hundredth = bcd2bin(hundredth); - - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d.%02d\n" - "rtc_date\t: %04d-%02d-%02d\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, hundredth, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday); - - /* - * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will - * match any value for that particular field. Values that are - * greater than a valid time, but less than 0xc0 shouldn't appear. - */ - ds1286_get_alm_time(&tm); - p += sprintf(p, "alarm\t\t: %s ", days[tm.tm_wday]); - if (tm.tm_hour <= 24) - p += sprintf(p, "%02d:", tm.tm_hour); - else - p += sprintf(p, "**:"); - - if (tm.tm_min <= 59) - p += sprintf(p, "%02d\n", tm.tm_min); - else - p += sprintf(p, "**\n"); - - month = rtc_read(RTC_MONTH); - p += sprintf(p, - "oscillator\t: %s\n" - "square_wave\t: %s\n", - (month & RTC_EOSC) ? "disabled" : "enabled", - (month & RTC_ESQW) ? "disabled" : "enabled"); - - amode = ((rtc_read(RTC_MINUTES_ALARM) & 0x80) >> 5) | - ((rtc_read(RTC_HOURS_ALARM) & 0x80) >> 6) | - ((rtc_read(RTC_DAY_ALARM) & 0x80) >> 7); - if (amode == 7) s = "each minute"; - else if (amode == 3) s = "minutes match"; - else if (amode == 1) s = "hours and minutes match"; - else if (amode == 0) s = "days, hours and minutes match"; - else s = "invalid"; - p += sprintf(p, "alarm_mode\t: %s\n", s); - - cmd = rtc_read(RTC_CMD); - p += sprintf(p, - "alarm_enable\t: %s\n" - "wdog_alarm\t: %s\n" - "alarm_mask\t: %s\n" - "wdog_alarm_mask\t: %s\n" - "interrupt_mode\t: %s\n" - "INTB_mode\t: %s_active\n" - "interrupt_pins\t: %s\n", - (cmd & RTC_TDF) ? "yes" : "no", - (cmd & RTC_WAF) ? "yes" : "no", - (cmd & RTC_TDM) ? "disabled" : "enabled", - (cmd & RTC_WAM) ? "disabled" : "enabled", - (cmd & RTC_PU_LVL) ? "pulse" : "level", - (cmd & RTC_IBH_LO) ? "low" : "high", - (cmd & RTC_IPSW) ? "unswapped" : "swapped"); - - return p - buf; -} - -static int ds1286_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len = ds1286_proc_output (page); - if (len <= off+count) *eof = 1; - *start = page + off; - len -= off; - if (len>count) - len = count; - if (len<0) - len = 0; - - return len; -} - -/* - * Returns true if a clock update is in progress - */ -static inline unsigned char ds1286_is_updating(void) -{ - return rtc_read(RTC_CMD) & RTC_TE; -} - - -static void ds1286_get_time(struct rtc_time *rtc_tm) -{ - unsigned char save_control; - unsigned long flags; - - /* - * read RTC once any update in progress is done. The update - * can take just over 2ms. We wait 10 to 20ms. There is no need to - * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP. - * If you need to know *exactly* when a second has started, enable - * periodic update complete interrupts, (via ioctl) and then - * immediately read /dev/rtc which will block until you get the IRQ. - * Once the read clears, read the RTC time (again via ioctl). Easy. - */ - - if (ds1286_is_updating() != 0) - msleep(20); - - /* - * Only the values that we read from the RTC are set. We leave - * tm_wday, tm_yday and tm_isdst untouched. Even though the - * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated - * by the RTC when initially set to a non-zero value. - */ - spin_lock_irqsave(&ds1286_lock, flags); - save_control = rtc_read(RTC_CMD); - rtc_write((save_control|RTC_TE), RTC_CMD); - - rtc_tm->tm_sec = rtc_read(RTC_SECONDS); - rtc_tm->tm_min = rtc_read(RTC_MINUTES); - rtc_tm->tm_hour = rtc_read(RTC_HOURS) & 0x3f; - rtc_tm->tm_mday = rtc_read(RTC_DATE); - rtc_tm->tm_mon = rtc_read(RTC_MONTH) & 0x1f; - rtc_tm->tm_year = rtc_read(RTC_YEAR); - - rtc_write(save_control, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); - rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); - rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); - rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); - rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); - rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); - - /* - * Account for differences between how the RTC uses the values - * and how they are defined in a struct rtc_time; - */ - if (rtc_tm->tm_year < 45) - rtc_tm->tm_year += 30; - if ((rtc_tm->tm_year += 40) < 70) - rtc_tm->tm_year += 100; - - rtc_tm->tm_mon--; -} - -static int ds1286_set_time(struct rtc_time *rtc_tm) -{ - unsigned char mon, day, hrs, min, sec, leap_yr; - unsigned char save_control; - unsigned int yrs; - unsigned long flags; - - - yrs = rtc_tm->tm_year + 1900; - mon = rtc_tm->tm_mon + 1; /* tm_mon starts at zero */ - day = rtc_tm->tm_mday; - hrs = rtc_tm->tm_hour; - min = rtc_tm->tm_min; - sec = rtc_tm->tm_sec; - - if (yrs < 1970) - return -EINVAL; - - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); - - if ((mon > 12) || (day == 0)) - return -EINVAL; - - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) - return -EINVAL; - - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) - return -EINVAL; - - if ((yrs -= 1940) > 255) /* They are unsigned */ - return -EINVAL; - - if (yrs >= 100) - yrs -= 100; - - sec = bin2bcd(sec); - min = bin2bcd(min); - hrs = bin2bcd(hrs); - day = bin2bcd(day); - mon = bin2bcd(mon); - yrs = bin2bcd(yrs); - - spin_lock_irqsave(&ds1286_lock, flags); - save_control = rtc_read(RTC_CMD); - rtc_write((save_control|RTC_TE), RTC_CMD); - - rtc_write(yrs, RTC_YEAR); - rtc_write(mon, RTC_MONTH); - rtc_write(day, RTC_DATE); - rtc_write(hrs, RTC_HOURS); - rtc_write(min, RTC_MINUTES); - rtc_write(sec, RTC_SECONDS); - rtc_write(0, RTC_HUNDREDTH_SECOND); - - rtc_write(save_control, RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - return 0; -} - -static void ds1286_get_alm_time(struct rtc_time *alm_tm) -{ - unsigned char cmd; - unsigned long flags; - - /* - * Only the values that we read from the RTC are set. That - * means only tm_wday, tm_hour, tm_min. - */ - spin_lock_irqsave(&ds1286_lock, flags); - alm_tm->tm_min = rtc_read(RTC_MINUTES_ALARM) & 0x7f; - alm_tm->tm_hour = rtc_read(RTC_HOURS_ALARM) & 0x1f; - alm_tm->tm_wday = rtc_read(RTC_DAY_ALARM) & 0x07; - cmd = rtc_read(RTC_CMD); - spin_unlock_irqrestore(&ds1286_lock, flags); - - alm_tm->tm_min = bcd2bin(alm_tm->tm_min); - alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour); - alm_tm->tm_sec = 0; -} - -module_init(ds1286_init); -module_exit(ds1286_exit); - -MODULE_AUTHOR("Ralf Baechle"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(RTC_MINOR); diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 408f5f92cb4e..53fdc7ff3870 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -427,9 +427,6 @@ static int hpet_release(struct inode *inode, struct file *file) if (irq) free_irq(irq, devp); - if (file->f_flags & FASYNC) - hpet_fasync(-1, file, 0); - file->private_data = NULL; return 0; } diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c index c422e870dc52..cd0ba51f7c80 100644 --- a/drivers/char/hw_random/amd-rng.c +++ b/drivers/char/hw_random/amd-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c index fed4ef5569f5..64d513f68368 100644 --- a/drivers/char/hw_random/geode-rng.c +++ b/drivers/char/hw_random/geode-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 8a2fce0756ec..5dcbe603eca2 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c index 128202e18fc9..4e9573c1d39e 100644 --- a/drivers/char/hw_random/via-rng.c +++ b/drivers/char/hw_random/via-rng.c @@ -11,7 +11,7 @@ * derived from * * Hardware driver for the AMD 768 Random Number Generator (RNG) - * (c) Copyright 2001 Red Hat Inc <alan@redhat.com> + * (c) Copyright 2001 Red Hat Inc * * derived from * diff --git a/drivers/char/ip27-rtc.c b/drivers/char/ip27-rtc.c deleted file mode 100644 index 2abd881b4cbc..000000000000 --- a/drivers/char/ip27-rtc.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * Driver for the SGS-Thomson M48T35 Timekeeper RAM chip - * - * Real Time Clock interface for Linux - * - * TODO: Implement periodic interrupts. - * - * Copyright (C) 2000 Silicon Graphics, Inc. - * Written by Ulf Carlsson (ulfc@engr.sgi.com) - * - * Based on code written by Paul Gortmaker. - * - * This driver allows use of the real time clock (built into - * nearly all computers) from user space. It exports the /dev/rtc - * interface supporting various ioctl() and also the /proc/rtc - * pseudo-file for status information. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#define RTC_VERSION "1.09b" - -#include <linux/bcd.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/smp_lock.h> -#include <linux/types.h> -#include <linux/miscdevice.h> -#include <linux/ioport.h> -#include <linux/fcntl.h> -#include <linux/rtc.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/proc_fs.h> - -#include <asm/m48t35.h> -#include <asm/sn/ioc3.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/sn/klconfig.h> -#include <asm/sn/sn0/ip27.h> -#include <asm/sn/sn0/hub.h> -#include <asm/sn/sn_private.h> - -static long rtc_ioctl(struct file *filp, unsigned int cmd, - unsigned long arg); - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data); - -static void get_rtc_time(struct rtc_time *rtc_tm); - -/* - * Bits in rtc_status. (6 bits of room for future expansion) - */ - -#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ -#define RTC_TIMER_ON 0x02 /* missed irq timer active */ - -static unsigned char rtc_status; /* bitmapped status byte. */ -static unsigned long rtc_freq; /* Current periodic IRQ rate */ -static struct m48t35_rtc *rtc; - -/* - * If this driver ever becomes modularised, it will be really nice - * to make the epoch retain its value across module reload... - */ - -static unsigned long epoch = 1970; /* year corresponding to 0x00 */ - -static const unsigned char days_in_mo[] = -{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -static long rtc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - - struct rtc_time wtime; - - switch (cmd) { - case RTC_RD_TIME: /* Read the time/date from RTC */ - { - get_rtc_time(&wtime); - break; - } - case RTC_SET_TIME: /* Set the RTC */ - { - struct rtc_time rtc_tm; - unsigned char mon, day, hrs, min, sec, leap_yr; - unsigned int yrs; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - yrs = rtc_tm.tm_year + 1900; - mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */ - day = rtc_tm.tm_mday; - hrs = rtc_tm.tm_hour; - min = rtc_tm.tm_min; - sec = rtc_tm.tm_sec; - - if (yrs < 1970) - return -EINVAL; - - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); - - if ((mon > 12) || (day == 0)) - return -EINVAL; - - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) - return -EINVAL; - - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) - return -EINVAL; - - if ((yrs -= epoch) > 255) /* They are unsigned */ - return -EINVAL; - - if (yrs > 169) - return -EINVAL; - - if (yrs >= 100) - yrs -= 100; - - sec = bin2bcd(sec); - min = bin2bcd(min); - hrs = bin2bcd(hrs); - day = bin2bcd(day); - mon = bin2bcd(mon); - yrs = bin2bcd(yrs); - - spin_lock_irq(&rtc_lock); - rtc->control |= M48T35_RTC_SET; - rtc->year = yrs; - rtc->month = mon; - rtc->date = day; - rtc->hour = hrs; - rtc->min = min; - rtc->sec = sec; - rtc->control &= ~M48T35_RTC_SET; - spin_unlock_irq(&rtc_lock); - - return 0; - } - default: - return -EINVAL; - } - return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; -} - -/* - * We enforce only one user at a time here with the open/close. - * Also clear the previous interrupt data on an open, and clean - * up things on a close. - */ - -static int rtc_open(struct inode *inode, struct file *file) -{ - lock_kernel(); - spin_lock_irq(&rtc_lock); - - if (rtc_status & RTC_IS_OPEN) { - spin_unlock_irq(&rtc_lock); - unlock_kernel(); - return -EBUSY; - } - - rtc_status |= RTC_IS_OPEN; - spin_unlock_irq(&rtc_lock); - unlock_kernel(); - - return 0; -} - -static int rtc_release(struct inode *inode, struct file *file) -{ - /* - * Turn off all interrupts once the device is no longer - * in use, and clear the data. - */ - - spin_lock_irq(&rtc_lock); - rtc_status &= ~RTC_IS_OPEN; - spin_unlock_irq(&rtc_lock); - - return 0; -} - -/* - * The various file operations we support. - */ - -static const struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = rtc_ioctl, - .open = rtc_open, - .release = rtc_release, -}; - -static struct miscdevice rtc_dev= -{ - RTC_MINOR, - "rtc", - &rtc_fops -}; - -static int __init rtc_init(void) -{ - rtc = (struct m48t35_rtc *) - (KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base + IOC3_BYTEBUS_DEV0); - - printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION); - if (misc_register(&rtc_dev)) { - printk(KERN_ERR "rtc: cannot register misc device.\n"); - return -ENODEV; - } - if (!create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL)) { - printk(KERN_ERR "rtc: cannot create /proc/rtc.\n"); - misc_deregister(&rtc_dev); - return -ENOENT; - } - - rtc_freq = 1024; - - return 0; -} - -static void __exit rtc_exit (void) -{ - /* interrupts and timer disabled at this point by rtc_release */ - - remove_proc_entry ("rtc", NULL); - misc_deregister(&rtc_dev); -} - -module_init(rtc_init); -module_exit(rtc_exit); - -/* - * Info exported via "/proc/rtc". - */ - -static int rtc_get_status(char *buf) -{ - char *p; - struct rtc_time tm; - - /* - * Just emulate the standard /proc/rtc - */ - - p = buf; - - get_rtc_time(&tm); - - /* - * There is no way to tell if the luser has the RTC set for local - * time or for Universal Standard Time (GMT). Probably local though. - */ - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d\n" - "rtc_date\t: %04d-%02d-%02d\n" - "rtc_epoch\t: %04lu\n" - "24hr\t\t: yes\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch); - - return p - buf; -} - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len = rtc_get_status(page); - if (len <= off+count) *eof = 1; - *start = page + off; - len -= off; - if (len>count) len = count; - if (len<0) len = 0; - return len; -} - -static void get_rtc_time(struct rtc_time *rtc_tm) -{ - /* - * Do we need to wait for the last update to finish? - */ - - /* - * Only the values that we read from the RTC are set. We leave - * tm_wday, tm_yday and tm_isdst untouched. Even though the - * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated - * by the RTC when initially set to a non-zero value. - */ - spin_lock_irq(&rtc_lock); - rtc->control |= M48T35_RTC_READ; - rtc_tm->tm_sec = rtc->sec; - rtc_tm->tm_min = rtc->min; - rtc_tm->tm_hour = rtc->hour; - rtc_tm->tm_mday = rtc->date; - rtc_tm->tm_mon = rtc->month; - rtc_tm->tm_year = rtc->year; - rtc->control &= ~M48T35_RTC_READ; - spin_unlock_irq(&rtc_lock); - - rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); - rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); - rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); - rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday); - rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon); - rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); - - /* - * Account for differences between how the RTC uses the values - * and how they are defined in a struct rtc_time; - */ - if ((rtc_tm->tm_year += (epoch - 1900)) <= 69) - rtc_tm->tm_year += 100; - - rtc_tm->tm_mon--; -} diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index 835a33c8d5f5..41fc11dc921c 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -162,8 +162,6 @@ static int ipmi_release(struct inode *inode, struct file *file) if (rv) return rv; - ipmi_fasync (-1, file, 0); - /* FIXME - free the messages in the list. */ kfree(priv); @@ -957,3 +955,4 @@ module_exit(cleanup_ipmi); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); MODULE_DESCRIPTION("Linux device interface for the IPMI message handler."); +MODULE_ALIAS("platform:ipmi_si"); diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index 235fab0bdf79..a4d57e31f713 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -870,7 +870,6 @@ static int ipmi_close(struct inode *ino, struct file *filep) clear_bit(0, &ipmi_wdog_open); } - ipmi_fasync(-1, filep, 0); expect_close = 0; return 0; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 9a626e50b793..4d64a02612a4 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -554,7 +554,7 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Initialize the struct pcmcia_device structure */ /* Interrupt setup */ - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = NULL; diff --git a/drivers/char/random.c b/drivers/char/random.c index 705a839f1796..675076f5fca8 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1139,18 +1139,12 @@ static int random_fasync(int fd, struct file *filp, int on) return fasync_helper(fd, filp, on, &fasync); } -static int random_release(struct inode *inode, struct file *filp) -{ - return fasync_helper(-1, filp, 0, &fasync); -} - const struct file_operations random_fops = { .read = random_read, .write = random_write, .poll = random_poll, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, - .release = random_release, }; const struct file_operations urandom_fops = { @@ -1158,7 +1152,6 @@ const struct file_operations urandom_fops = { .write = random_write, .unlocked_ioctl = random_ioctl, .fasync = random_fasync, - .release = random_release, }; /*************************************************************** diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index 32dc89720d58..20d6efb6324e 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -788,8 +788,6 @@ static int rtc_release(struct inode *inode, struct file *file) } spin_unlock_irq(&rtc_lock); - if (file->f_flags & FASYNC) - rtc_fasync(-1, file, 0); no_irq: #endif diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 85e0eb76eeab..2457b07dabd6 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -898,7 +898,6 @@ static int sonypi_misc_fasync(int fd, struct file *filp, int on) static int sonypi_misc_release(struct inode *inode, struct file *file) { - sonypi_misc_fasync(-1, file, 0); mutex_lock(&sonypi_device.lock); sonypi_device.open_count--; mutex_unlock(&sonypi_device.lock); diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 5a11e3cbcae2..e0dbd388757f 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -102,6 +102,13 @@ config EDAC_I3000 Support for error detection and correction on the Intel 3000 and 3010 server chipsets. +config EDAC_X38 + tristate "Intel X38" + depends on EDAC_MM_EDAC && PCI && X86 + help + Support for error detection and correction on the Intel + X38 server chipsets. + config EDAC_I82860 tristate "Intel 82860" depends on EDAC_MM_EDAC && PCI && X86_32 diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index e5e9104b5520..62c2d9bad8dc 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_EDAC_I82443BXGX) += i82443bxgx_edac.o obj-$(CONFIG_EDAC_I82875P) += i82875p_edac.o obj-$(CONFIG_EDAC_I82975X) += i82975x_edac.o obj-$(CONFIG_EDAC_I3000) += i3000_edac.o +obj-$(CONFIG_EDAC_X38) += x38_edac.o obj-$(CONFIG_EDAC_I82860) += i82860_edac.o obj-$(CONFIG_EDAC_R82600) += r82600_edac.o obj-$(CONFIG_EDAC_PASEMI) += pasemi_edac.o diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c index 887072f5dc8b..cd2e3b8087e7 100644 --- a/drivers/edac/cell_edac.c +++ b/drivers/edac/cell_edac.c @@ -9,6 +9,7 @@ */ #undef DEBUG +#include <linux/edac.h> #include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -164,6 +165,8 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) if (regs == NULL) return -ENODEV; + edac_op_state = EDAC_OPSTATE_POLL; + /* Get channel population */ reg = in_be64(®s->mic_mnt_cfg); dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg); diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c new file mode 100644 index 000000000000..2406c2ce2844 --- /dev/null +++ b/drivers/edac/x38_edac.c @@ -0,0 +1,524 @@ +/* + * Intel X38 Memory Controller kernel module + * Copyright (C) 2008 Cluster Computing, Inc. + * + * This file may be distributed under the terms of the + * GNU General Public License. + * + * This file is based on i3200_edac.c + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/edac.h> +#include "edac_core.h" + +#define X38_REVISION "1.1" + +#define EDAC_MOD_STR "x38_edac" + +#define PCI_DEVICE_ID_INTEL_X38_HB 0x29e0 + +#define X38_RANKS 8 +#define X38_RANKS_PER_CHANNEL 4 +#define X38_CHANNELS 2 + +/* Intel X38 register addresses - device 0 function 0 - DRAM Controller */ + +#define X38_MCHBAR_LOW 0x48 /* MCH Memory Mapped Register BAR */ +#define X38_MCHBAR_HIGH 0x4b +#define X38_MCHBAR_MASK 0xfffffc000ULL /* bits 35:14 */ +#define X38_MMR_WINDOW_SIZE 16384 + +#define X38_TOM 0xa0 /* Top of Memory (16b) + * + * 15:10 reserved + * 9:0 total populated physical memory + */ +#define X38_TOM_MASK 0x3ff /* bits 9:0 */ +#define X38_TOM_SHIFT 26 /* 64MiB grain */ + +#define X38_ERRSTS 0xc8 /* Error Status Register (16b) + * + * 15 reserved + * 14 Isochronous TBWRR Run Behind FIFO Full + * (ITCV) + * 13 Isochronous TBWRR Run Behind FIFO Put + * (ITSTV) + * 12 reserved + * 11 MCH Thermal Sensor Event + * for SMI/SCI/SERR (GTSE) + * 10 reserved + * 9 LOCK to non-DRAM Memory Flag (LCKF) + * 8 reserved + * 7 DRAM Throttle Flag (DTF) + * 6:2 reserved + * 1 Multi-bit DRAM ECC Error Flag (DMERR) + * 0 Single-bit DRAM ECC Error Flag (DSERR) + */ +#define X38_ERRSTS_UE 0x0002 +#define X38_ERRSTS_CE 0x0001 +#define X38_ERRSTS_BITS (X38_ERRSTS_UE | X38_ERRSTS_CE) + + +/* Intel MMIO register space - device 0 function 0 - MMR space */ + +#define X38_C0DRB 0x200 /* Channel 0 DRAM Rank Boundary (16b x 4) + * + * 15:10 reserved + * 9:0 Channel 0 DRAM Rank Boundary Address + */ +#define X38_C1DRB 0x600 /* Channel 1 DRAM Rank Boundary (16b x 4) */ +#define X38_DRB_MASK 0x3ff /* bits 9:0 */ +#define X38_DRB_SHIFT 26 /* 64MiB grain */ + +#define X38_C0ECCERRLOG 0x280 /* Channel 0 ECC Error Log (64b) + * + * 63:48 Error Column Address (ERRCOL) + * 47:32 Error Row Address (ERRROW) + * 31:29 Error Bank Address (ERRBANK) + * 28:27 Error Rank Address (ERRRANK) + * 26:24 reserved + * 23:16 Error Syndrome (ERRSYND) + * 15: 2 reserved + * 1 Multiple Bit Error Status (MERRSTS) + * 0 Correctable Error Status (CERRSTS) + */ +#define X38_C1ECCERRLOG 0x680 /* Channel 1 ECC Error Log (64b) */ +#define X38_ECCERRLOG_CE 0x1 +#define X38_ECCERRLOG_UE 0x2 +#define X38_ECCERRLOG_RANK_BITS 0x18000000 +#define X38_ECCERRLOG_SYNDROME_BITS 0xff0000 + +#define X38_CAPID0 0xe0 /* see P.94 of spec for details */ + +static int x38_channel_num; + +static int how_many_channel(struct pci_dev *pdev) +{ + unsigned char capid0_8b; /* 8th byte of CAPID0 */ + + pci_read_config_byte(pdev, X38_CAPID0 + 8, &capid0_8b); + if (capid0_8b & 0x20) { /* check DCD: Dual Channel Disable */ + debugf0("In single channel mode.\n"); + x38_channel_num = 1; + } else { + debugf0("In dual channel mode.\n"); + x38_channel_num = 2; + } + + return x38_channel_num; +} + +static unsigned long eccerrlog_syndrome(u64 log) +{ + return (log & X38_ECCERRLOG_SYNDROME_BITS) >> 16; +} + +static int eccerrlog_row(int channel, u64 log) +{ + return ((log & X38_ECCERRLOG_RANK_BITS) >> 27) | + (channel * X38_RANKS_PER_CHANNEL); +} + +enum x38_chips { + X38 = 0, +}; + +struct x38_dev_info { + const char *ctl_name; +}; + +struct x38_error_info { + u16 errsts; + u16 errsts2; + u64 eccerrlog[X38_CHANNELS]; +}; + +static const struct x38_dev_info x38_devs[] = { + [X38] = { + .ctl_name = "x38"}, +}; + +static struct pci_dev *mci_pdev; +static int x38_registered = 1; + + +static void x38_clear_error_info(struct mem_ctl_info *mci) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->dev); + + /* + * Clear any error bits. + * (Yes, we really clear bits by writing 1 to them.) + */ + pci_write_bits16(pdev, X38_ERRSTS, X38_ERRSTS_BITS, + X38_ERRSTS_BITS); +} + +static u64 x38_readq(const void __iomem *addr) +{ + return readl(addr) | (((u64)readl(addr + 4)) << 32); +} + +static void x38_get_and_clear_error_info(struct mem_ctl_info *mci, + struct x38_error_info *info) +{ + struct pci_dev *pdev; + void __iomem *window = mci->pvt_info; + + pdev = to_pci_dev(mci->dev); + + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(pdev, X38_ERRSTS, &info->errsts); + if (!(info->errsts & X38_ERRSTS_BITS)) + return; + + info->eccerrlog[0] = x38_readq(window + X38_C0ECCERRLOG); + if (x38_channel_num == 2) + info->eccerrlog[1] = x38_readq(window + X38_C1ECCERRLOG); + + pci_read_config_word(pdev, X38_ERRSTS, &info->errsts2); + + /* + * If the error is the same for both reads then the first set + * of reads is valid. If there is a change then there is a CE + * with no info and the second set of reads is valid and + * should be UE info. + */ + if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) { + info->eccerrlog[0] = x38_readq(window + X38_C0ECCERRLOG); + if (x38_channel_num == 2) + info->eccerrlog[1] = + x38_readq(window + X38_C1ECCERRLOG); + } + + x38_clear_error_info(mci); +} + +static void x38_process_error_info(struct mem_ctl_info *mci, + struct x38_error_info *info) +{ + int channel; + u64 log; + + if (!(info->errsts & X38_ERRSTS_BITS)) + return; + + if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) { + edac_mc_handle_ce_no_info(mci, "UE overwrote CE"); + info->errsts = info->errsts2; + } + + for (channel = 0; channel < x38_channel_num; channel++) { + log = info->eccerrlog[channel]; + if (log & X38_ECCERRLOG_UE) { + edac_mc_handle_ue(mci, 0, 0, + eccerrlog_row(channel, log), "x38 UE"); + } else if (log & X38_ECCERRLOG_CE) { + edac_mc_handle_ce(mci, 0, 0, + eccerrlog_syndrome(log), + eccerrlog_row(channel, log), 0, "x38 CE"); + } + } +} + +static void x38_check(struct mem_ctl_info *mci) +{ + struct x38_error_info info; + + debugf1("MC%d: %s()\n", mci->mc_idx, __func__); + x38_get_and_clear_error_info(mci, &info); + x38_process_error_info(mci, &info); +} + + +void __iomem *x38_map_mchbar(struct pci_dev *pdev) +{ + union { + u64 mchbar; + struct { + u32 mchbar_low; + u32 mchbar_high; + }; + } u; + void __iomem *window; + + pci_read_config_dword(pdev, X38_MCHBAR_LOW, &u.mchbar_low); + pci_write_config_dword(pdev, X38_MCHBAR_LOW, u.mchbar_low | 0x1); + pci_read_config_dword(pdev, X38_MCHBAR_HIGH, &u.mchbar_high); + u.mchbar &= X38_MCHBAR_MASK; + + if (u.mchbar != (resource_size_t)u.mchbar) { + printk(KERN_ERR + "x38: mmio space beyond accessible range (0x%llx)\n", + (unsigned long long)u.mchbar); + return NULL; + } + + window = ioremap_nocache(u.mchbar, X38_MMR_WINDOW_SIZE); + if (!window) + printk(KERN_ERR "x38: cannot map mmio space at 0x%llx\n", + (unsigned long long)u.mchbar); + + return window; +} + + +static void x38_get_drbs(void __iomem *window, + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]) +{ + int i; + + for (i = 0; i < X38_RANKS_PER_CHANNEL; i++) { + drbs[0][i] = readw(window + X38_C0DRB + 2*i) & X38_DRB_MASK; + drbs[1][i] = readw(window + X38_C1DRB + 2*i) & X38_DRB_MASK; + } +} + +static bool x38_is_stacked(struct pci_dev *pdev, + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]) +{ + u16 tom; + + pci_read_config_word(pdev, X38_TOM, &tom); + tom &= X38_TOM_MASK; + + return drbs[X38_CHANNELS - 1][X38_RANKS_PER_CHANNEL - 1] == tom; +} + +static unsigned long drb_to_nr_pages( + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL], + bool stacked, int channel, int rank) +{ + int n; + + n = drbs[channel][rank]; + if (rank > 0) + n -= drbs[channel][rank - 1]; + if (stacked && (channel == 1) && drbs[channel][rank] == + drbs[channel][X38_RANKS_PER_CHANNEL - 1]) { + n -= drbs[0][X38_RANKS_PER_CHANNEL - 1]; + } + + n <<= (X38_DRB_SHIFT - PAGE_SHIFT); + return n; +} + +static int x38_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc; + int i; + struct mem_ctl_info *mci = NULL; + unsigned long last_page; + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]; + bool stacked; + void __iomem *window; + + debugf0("MC: %s()\n", __func__); + + window = x38_map_mchbar(pdev); + if (!window) + return -ENODEV; + + x38_get_drbs(window, drbs); + + how_many_channel(pdev); + + /* FIXME: unconventional pvt_info usage */ + mci = edac_mc_alloc(0, X38_RANKS, x38_channel_num, 0); + if (!mci) + return -ENOMEM; + + debugf3("MC: %s(): init mci\n", __func__); + + mci->dev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR2; + + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + + mci->mod_name = EDAC_MOD_STR; + mci->mod_ver = X38_REVISION; + mci->ctl_name = x38_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = x38_check; + mci->ctl_page_to_phys = NULL; + mci->pvt_info = window; + + stacked = x38_is_stacked(pdev, drbs); + + /* + * The dram rank boundary (DRB) reg values are boundary addresses + * for each DRAM rank with a granularity of 64MB. DRB regs are + * cumulative; the last one will contain the total memory + * contained in all ranks. + */ + last_page = -1UL; + for (i = 0; i < mci->nr_csrows; i++) { + unsigned long nr_pages; + struct csrow_info *csrow = &mci->csrows[i]; + + nr_pages = drb_to_nr_pages(drbs, stacked, + i / X38_RANKS_PER_CHANNEL, + i % X38_RANKS_PER_CHANNEL); + + if (nr_pages == 0) { + csrow->mtype = MEM_EMPTY; + continue; + } + + csrow->first_page = last_page + 1; + last_page += nr_pages; + csrow->last_page = last_page; + csrow->nr_pages = nr_pages; + + csrow->grain = nr_pages << PAGE_SHIFT; + csrow->mtype = MEM_DDR2; + csrow->dtype = DEV_UNKNOWN; + csrow->edac_mode = EDAC_UNKNOWN; + } + + x38_clear_error_info(mci); + + rc = -ENODEV; + if (edac_mc_add_mc(mci)) { + debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__); + goto fail; + } + + /* get this far and it's successful */ + debugf3("MC: %s(): success\n", __func__); + return 0; + +fail: + iounmap(window); + if (mci) + edac_mc_free(mci); + + return rc; +} + +static int __devinit x38_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc; + + debugf0("MC: %s()\n", __func__); + + if (pci_enable_device(pdev) < 0) + return -EIO; + + rc = x38_probe1(pdev, ent->driver_data); + if (!mci_pdev) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void __devexit x38_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + debugf0("%s()\n", __func__); + + mci = edac_mc_del_mc(&pdev->dev); + if (!mci) + return; + + iounmap(mci->pvt_info); + + edac_mc_free(mci); +} + +static const struct pci_device_id x38_pci_tbl[] __devinitdata = { + { + PCI_VEND_DEV(INTEL, X38_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + X38}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, x38_pci_tbl); + +static struct pci_driver x38_driver = { + .name = EDAC_MOD_STR, + .probe = x38_init_one, + .remove = __devexit_p(x38_remove_one), + .id_table = x38_pci_tbl, +}; + +static int __init x38_init(void) +{ + int pci_rc; + + debugf3("MC: %s()\n", __func__); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&x38_driver); + if (pci_rc < 0) + goto fail0; + + if (!mci_pdev) { + x38_registered = 0; + mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_X38_HB, NULL); + if (!mci_pdev) { + debugf0("x38 pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + + pci_rc = x38_init_one(mci_pdev, x38_pci_tbl); + if (pci_rc < 0) { + debugf0("x38 init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + + return 0; + +fail1: + pci_unregister_driver(&x38_driver); + +fail0: + if (mci_pdev) + pci_dev_put(mci_pdev); + + return pci_rc; +} + +static void __exit x38_exit(void) +{ + debugf3("MC: %s()\n", __func__); + + pci_unregister_driver(&x38_driver); + if (!x38_registered) { + x38_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + } +} + +module_init(x38_init); +module_exit(x38_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cluster Computing, Inc. Hitoshi Mitake"); +MODULE_DESCRIPTION("MC support for Intel X38 memory hub controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 251416f2148f..8e16bfbdcb3d 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -476,6 +476,7 @@ static int ar_context_add_page(struct ar_context *ctx) if (ab == NULL) return -ENOMEM; + ab->next = NULL; memset(&ab->descriptor, 0, sizeof(ab->descriptor)); ab->descriptor.control = cpu_to_le16(DESCRIPTOR_INPUT_MORE | DESCRIPTOR_STATUS | @@ -496,6 +497,21 @@ static int ar_context_add_page(struct ar_context *ctx) return 0; } +static void ar_context_release(struct ar_context *ctx) +{ + struct ar_buffer *ab, *ab_next; + size_t offset; + dma_addr_t ab_bus; + + for (ab = ctx->current_buffer; ab; ab = ab_next) { + ab_next = ab->next; + offset = offsetof(struct ar_buffer, data); + ab_bus = le32_to_cpu(ab->descriptor.data_address) - offset; + dma_free_coherent(ctx->ohci->card.device, PAGE_SIZE, + ab, ab_bus); + } +} + #if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) #define cond_le32_to_cpu(v) \ (ohci->old_uninorth ? (__force __u32)(v) : le32_to_cpu(v)) @@ -2349,8 +2365,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) ohci = kzalloc(sizeof(*ohci), GFP_KERNEL); if (ohci == NULL) { - fw_error("Could not malloc fw_ohci data.\n"); - return -ENOMEM; + err = -ENOMEM; + goto fail; } fw_card_initialize(&ohci->card, &ohci_driver, &dev->dev); @@ -2359,7 +2375,7 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) err = pci_enable_device(dev); if (err) { - fw_error("Failed to enable OHCI hardware.\n"); + fw_error("Failed to enable OHCI hardware\n"); goto fail_free; } @@ -2427,9 +2443,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) ohci->ir_context_list = kzalloc(size, GFP_KERNEL); if (ohci->it_context_list == NULL || ohci->ir_context_list == NULL) { - fw_error("Out of memory for it/ir contexts.\n"); err = -ENOMEM; - goto fail_registers; + goto fail_contexts; } /* self-id dma buffer allocation */ @@ -2438,9 +2453,8 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) &ohci->self_id_bus, GFP_KERNEL); if (ohci->self_id_cpu == NULL) { - fw_error("Out of memory for self ID buffer.\n"); err = -ENOMEM; - goto fail_registers; + goto fail_contexts; } bus_options = reg_read(ohci, OHCI1394_BusOptions); @@ -2460,9 +2474,13 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) fail_self_id: dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE, ohci->self_id_cpu, ohci->self_id_bus); - fail_registers: - kfree(ohci->it_context_list); + fail_contexts: kfree(ohci->ir_context_list); + kfree(ohci->it_context_list); + context_release(&ohci->at_response_ctx); + context_release(&ohci->at_request_ctx); + ar_context_release(&ohci->ar_response_ctx); + ar_context_release(&ohci->ar_request_ctx); pci_iounmap(dev, ohci->registers); fail_iomem: pci_release_region(dev, 0); @@ -2471,6 +2489,9 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) fail_free: kfree(&ohci->card); ohci_pmac_off(dev); + fail: + if (err == -ENOMEM) + fw_error("Out of memory\n"); return err; } @@ -2491,8 +2512,19 @@ static void pci_remove(struct pci_dev *dev) software_reset(ohci); free_irq(dev->irq, ohci); + + if (ohci->next_config_rom && ohci->next_config_rom != ohci->config_rom) + dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, + ohci->next_config_rom, ohci->next_config_rom_bus); + if (ohci->config_rom) + dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE, + ohci->config_rom, ohci->config_rom_bus); dma_free_coherent(ohci->card.device, SELF_ID_BUF_SIZE, ohci->self_id_cpu, ohci->self_id_bus); + ar_context_release(&ohci->ar_request_ctx); + ar_context_release(&ohci->ar_response_ctx); + context_release(&ohci->at_request_ctx); + context_release(&ohci->at_response_ctx); kfree(ohci->it_context_list); kfree(ohci->ir_context_list); pci_iounmap(dev, ohci->registers); diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index ef0b9b419c27..d334cac5e1fc 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -173,6 +173,9 @@ struct sbp2_target { int blocked; /* ditto */ }; +/* Impossible login_id, to detect logout attempt before successful login */ +#define INVALID_LOGIN_ID 0x10000 + /* * Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be * provided in the config rom. Most devices do provide a value, which @@ -788,9 +791,20 @@ static void sbp2_release_target(struct kref *kref) scsi_remove_device(sdev); scsi_device_put(sdev); } - sbp2_send_management_orb(lu, tgt->node_id, lu->generation, - SBP2_LOGOUT_REQUEST, lu->login_id, NULL); - + if (lu->login_id != INVALID_LOGIN_ID) { + int generation, node_id; + /* + * tgt->node_id may be obsolete here if we failed + * during initial login or after a bus reset where + * the topology changed. + */ + generation = device->generation; + smp_rmb(); /* node_id vs. generation */ + node_id = device->node_id; + sbp2_send_management_orb(lu, node_id, generation, + SBP2_LOGOUT_REQUEST, + lu->login_id, NULL); + } fw_core_remove_address_handler(&lu->address_handler); list_del(&lu->link); kfree(lu); @@ -805,19 +819,20 @@ static void sbp2_release_target(struct kref *kref) static struct workqueue_struct *sbp2_wq; +static void sbp2_target_put(struct sbp2_target *tgt) +{ + kref_put(&tgt->kref, sbp2_release_target); +} + /* * Always get the target's kref when scheduling work on one its units. * Each workqueue job is responsible to call sbp2_target_put() upon return. */ static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay) { - if (queue_delayed_work(sbp2_wq, &lu->work, delay)) - kref_get(&lu->tgt->kref); -} - -static void sbp2_target_put(struct sbp2_target *tgt) -{ - kref_put(&tgt->kref, sbp2_release_target); + kref_get(&lu->tgt->kref); + if (!queue_delayed_work(sbp2_wq, &lu->work, delay)) + sbp2_target_put(lu->tgt); } /* @@ -978,6 +993,7 @@ static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry) lu->tgt = tgt; lu->lun = lun_entry & 0xffff; + lu->login_id = INVALID_LOGIN_ID; lu->retries = 0; lu->has_sdev = false; lu->blocked = false; @@ -1147,7 +1163,7 @@ static int sbp2_probe(struct device *dev) /* Do the login in a workqueue so we can easily reschedule retries. */ list_for_each_entry(lu, &tgt->lu_list, link) - sbp2_queue_work(lu, 0); + sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); return 0; fail_tgt_put: diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index c1b81077c4a8..5e204713002d 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -413,7 +413,7 @@ static void update_tree(struct fw_card *card, struct fw_node *root) { struct list_head list0, list1; - struct fw_node *node0, *node1; + struct fw_node *node0, *node1, *next1; int i, event; INIT_LIST_HEAD(&list0); @@ -485,7 +485,9 @@ update_tree(struct fw_card *card, struct fw_node *root) } node0 = fw_node(node0->link.next); - node1 = fw_node(node1->link.next); + next1 = fw_node(node1->link.next); + fw_node_put(node1); + node1 = next1; } } diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index 027f58ce81ad..aed7dbb17cda 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -248,7 +248,7 @@ struct fw_card { struct fw_node *local_node; struct fw_node *root_node; struct fw_node *irm_node; - int color; + u8 color; /* must be u8 to match the definition in struct fw_node */ int gap_count; bool beta_repeaters_present; diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index 0d46627663b1..78eeed5caaff 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -406,8 +406,6 @@ int drm_release(struct inode *inode, struct file *filp) if (dev->driver->driver_features & DRIVER_GEM) drm_gem_release(dev, file_priv); - drm_fasync(-1, filp, 0); - mutex_lock(&dev->ctxlist_mutex); if (!list_empty(&dev->ctxlist)) { struct drm_ctx_list *pos, *n; diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 743e6f8cb202..1903e7515650 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1263,6 +1263,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658) }, { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, diff --git a/drivers/hid/hid-dell.c b/drivers/hid/hid-dell.c index 1a0d0dfc62fc..f5474300b83a 100644 --- a/drivers/hid/hid-dell.c +++ b/drivers/hid/hid-dell.c @@ -48,6 +48,7 @@ err_free: static const struct hid_device_id dell_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658) }, { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { } }; MODULE_DEVICE_TABLE(hid, dell_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index a0d6a6cb1842..5cc404291736 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -163,6 +163,9 @@ #define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc +#define USB_VENDOR_ID_GENERIC_13BA 0x13ba +#define USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE 0x0017 + #define USB_VENDOR_ID_GLAB 0x06c2 #define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038 #define USB_DEVICE_ID_1_PHIDGETSERVO_30 0x0039 diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 42bdd83444c1..18e5ddd722cd 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -20,6 +20,7 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/mm.h> +#include <linux/mutex.h> #include <linux/smp_lock.h> #include <linux/spinlock.h> #include <asm/unaligned.h> @@ -776,21 +777,10 @@ static int usbhid_start(struct hid_device *hid) struct usb_interface *intf = to_usb_interface(hid->dev.parent); struct usb_host_interface *interface = intf->cur_altsetting; struct usb_device *dev = interface_to_usbdev(intf); - struct usbhid_device *usbhid; + struct usbhid_device *usbhid = hid->driver_data; unsigned int n, insize = 0; int ret; - WARN_ON(hid->driver_data); - - usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL); - if (usbhid == NULL) { - ret = -ENOMEM; - goto err; - } - - hid->driver_data = usbhid; - usbhid->hid = hid; - usbhid->bufsize = HID_MIN_BUFFER_SIZE; hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize); hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize); @@ -804,6 +794,7 @@ static int usbhid_start(struct hid_device *hid) if (insize > HID_MAX_BUFFER_SIZE) insize = HID_MAX_BUFFER_SIZE; + mutex_lock(&usbhid->setup); if (hid_alloc_buffers(dev, hid)) { ret = -ENOMEM; goto fail; @@ -888,6 +879,9 @@ static int usbhid_start(struct hid_device *hid) usbhid_init_reports(hid); hid_dump_device(hid); + set_bit(HID_STARTED, &usbhid->iofl); + mutex_unlock(&usbhid->setup); + return 0; fail: @@ -895,8 +889,7 @@ fail: usb_free_urb(usbhid->urbout); usb_free_urb(usbhid->urbctrl); hid_free_buffers(dev, hid); - kfree(usbhid); -err: + mutex_unlock(&usbhid->setup); return ret; } @@ -907,6 +900,8 @@ static void usbhid_stop(struct hid_device *hid) if (WARN_ON(!usbhid)) return; + mutex_lock(&usbhid->setup); + clear_bit(HID_STARTED, &usbhid->iofl); spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ set_bit(HID_DISCONNECTED, &usbhid->iofl); spin_unlock_irq(&usbhid->inlock); @@ -931,8 +926,7 @@ static void usbhid_stop(struct hid_device *hid) usb_free_urb(usbhid->urbout); hid_free_buffers(hid_to_usb_dev(hid), hid); - kfree(usbhid); - hid->driver_data = NULL; + mutex_unlock(&usbhid->setup); } static struct hid_ll_driver usb_hid_driver = { @@ -947,6 +941,7 @@ static struct hid_ll_driver usb_hid_driver = { static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); + struct usbhid_device *usbhid; struct hid_device *hid; size_t len; int ret; @@ -1000,14 +995,26 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0) hid->uniq[0] = 0; + usbhid = kzalloc(sizeof(*usbhid), GFP_KERNEL); + if (usbhid == NULL) { + ret = -ENOMEM; + goto err; + } + + hid->driver_data = usbhid; + usbhid->hid = hid; + mutex_init(&usbhid->setup); /* needed on suspend/resume */ + ret = hid_add_device(hid); if (ret) { if (ret != -ENODEV) dev_err(&intf->dev, "can't add hid device: %d\n", ret); - goto err; + goto err_free; } return 0; +err_free: + kfree(usbhid); err: hid_destroy_device(hid); return ret; @@ -1016,11 +1023,14 @@ err: static void hid_disconnect(struct usb_interface *intf) { struct hid_device *hid = usb_get_intfdata(intf); + struct usbhid_device *usbhid; if (WARN_ON(!hid)) return; + usbhid = hid->driver_data; hid_destroy_device(hid); + kfree(usbhid); } static int hid_suspend(struct usb_interface *intf, pm_message_t message) @@ -1028,11 +1038,18 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) struct hid_device *hid = usb_get_intfdata (intf); struct usbhid_device *usbhid = hid->driver_data; + mutex_lock(&usbhid->setup); + if (!test_bit(HID_STARTED, &usbhid->iofl)) { + mutex_unlock(&usbhid->setup); + return 0; + } + spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ set_bit(HID_SUSPENDED, &usbhid->iofl); spin_unlock_irq(&usbhid->inlock); - del_timer(&usbhid->io_retry); + del_timer_sync(&usbhid->io_retry); usb_kill_urb(usbhid->urbin); + mutex_unlock(&usbhid->setup); dev_dbg(&intf->dev, "suspend\n"); return 0; } @@ -1043,9 +1060,16 @@ static int hid_resume(struct usb_interface *intf) struct usbhid_device *usbhid = hid->driver_data; int status; + mutex_lock(&usbhid->setup); + if (!test_bit(HID_STARTED, &usbhid->iofl)) { + mutex_unlock(&usbhid->setup); + return 0; + } + clear_bit(HID_SUSPENDED, &usbhid->iofl); usbhid->retry_delay = 0; status = hid_start_in(hid); + mutex_unlock(&usbhid->setup); dev_dbg(&intf->dev, "resume status %d\n", status); return status; } diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 3ac320785fc5..83e851a5ed30 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -242,8 +242,6 @@ static int hiddev_release(struct inode * inode, struct file * file) struct hiddev_list *list = file->private_data; unsigned long flags; - hiddev_fasync(-1, file, 0); - spin_lock_irqsave(&list->hiddev->list_lock, flags); list_del(&list->node); spin_unlock_irqrestore(&list->hiddev->list_lock, flags); diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h index abedb13c623e..55973ff54008 100644 --- a/drivers/hid/usbhid/usbhid.h +++ b/drivers/hid/usbhid/usbhid.h @@ -27,6 +27,7 @@ #include <linux/types.h> #include <linux/slab.h> #include <linux/list.h> +#include <linux/mutex.h> #include <linux/timer.h> #include <linux/wait.h> #include <linux/workqueue.h> @@ -73,6 +74,7 @@ struct usbhid_device { dma_addr_t outbuf_dma; /* Output buffer dma */ spinlock_t outlock; /* Output fifo spinlock */ + struct mutex setup; unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ struct timer_list io_retry; /* Retry timer */ unsigned long stop_retry; /* Time to give up, in jiffies */ diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index c772e02c2803..1fac4e233133 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -507,7 +507,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int unsigned long timeout; int ret; - if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN) + if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)) return -EIO; ret = s3c24xx_i2c_set_master(i2c); diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index c3022a023449..e4c98539c517 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -81,6 +81,7 @@ static struct i2c_algo_bit_data scx200_i2c_data = { static struct i2c_adapter scx200_i2c_ops = { .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .id = I2C_HW_B_SCX200, .algo_data = &scx200_i2c_data, .name = "NatSemi SCx200 I2C", diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index daf9dce39e52..e56c7b72f9e2 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -5,7 +5,7 @@ * * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) * May be copied or modified under the terms of the GNU General Public License - * Copyright (C) 2002 Alan Cox <alan@redhat.com> + * Copyright (C) 2002 Alan Cox * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index a7909e9c720e..f5afd46ed51c 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -52,7 +52,7 @@ * different clocks on read/write. This requires overloading rw_disk and * other deeply crazy things. Thanks to <http://www.hoerstreich.de> for * keeping me sane. - * Alan Cox <alan@redhat.com> + * Alan Cox <alan@lxorguk.ukuu.org.uk> * * - fix the clock turnaround code: it was writing to the wrong ports when * called for the secondary channel, caching the current clock mode per- diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 48b5eda3ab41..42ab6d8715f2 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1250,7 +1250,8 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) * separate masks. */ alignment = queue_dma_alignment(q) | q->dma_pad_mask; - if ((unsigned long)buf & alignment || rq->data_len & alignment + if ((unsigned long)buf & alignment + || rq->data_len & q->dma_pad_mask || object_is_on_stack(buf)) drive->dma = 0; } diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index e5adebe8ac2c..eb9fac4d0f0c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -2,7 +2,7 @@ * Copyright (C) 1994-1998 Linus Torvalds & authors (see below) * Copyright (C) 1998-2002 Linux ATA Development * Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat <alan@redhat.com> + * Copyright (C) 2003 Red Hat * Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz */ diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 7b6662854374..b8078b3231f7 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -281,7 +281,12 @@ static int ide_gd_media_changed(struct gendisk *disk) static int ide_gd_revalidate_disk(struct gendisk *disk) { struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); - set_capacity(disk, ide_gd_capacity(idkp->drive)); + ide_drive_t *drive = idkp->drive; + + if (ide_gd_media_changed(disk)) + drive->disk_ops->get_capacity(drive); + + set_capacity(disk, ide_gd_capacity(drive)); return 0; } diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index bb7a1ed8094e..5d6ba14e211d 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat <alan@redhat.com> + * Copyright (C) 2003 Red Hat * */ diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index 474f96a7c076..bddae2b329a0 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> - * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com> + * Portions (C) Copyright 2002 Red Hat Inc * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index c31d0dd7a532..f3cddd1b2f8f 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -1,6 +1,6 @@ /* * Copyright (C) 1997-1998 Mark Lord - * Copyright (C) 2003 Red Hat <alan@redhat.com> + * Copyright (C) 2003 Red Hat * * Some code was moved here from ide.c, see it for original copyrights. */ diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index 995e18bb3139..ef004089761b 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004 Red Hat <alan@redhat.com> + * Copyright (C) 2004 Red Hat * Copyright (C) 2007 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public License diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c index 9a68433cf46d..bf2be6431b20 100644 --- a/drivers/ide/jmicron.c +++ b/drivers/ide/jmicron.c @@ -1,6 +1,6 @@ /* - * Copyright (C) 2006 Red Hat <alan@redhat.com> + * Copyright (C) 2006 Red Hat * * May be copied or modified under the terms of the GNU General Public License */ diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index d63f9fdca76b..61d2d920a5cd 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -1,7 +1,7 @@ /* * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat Inc <alan@redhat.com> + * Copyright (C) 2003 Red Hat * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com> * * May be copied or modified under the terms of the GNU General Public License diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index f26aa5d54efb..0f48f9dacfa5 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c @@ -5,7 +5,7 @@ * * This code is based on drivers/ide/pci/siimage.c: * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat <alan@redhat.com> + * Copyright (C) 2003 Red Hat * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c index c3107df7773d..7d622d20bc4c 100644 --- a/drivers/ide/siimage.c +++ b/drivers/ide/siimage.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat <alan@redhat.com> + * Copyright (C) 2003 Red Hat * Copyright (C) 2007-2008 MontaVista Software, Inc. * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz * diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index fa660f931a11..9120063e8f87 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c @@ -26,12 +26,13 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch, unsigned int sp = (cr >> 4) & 3; unsigned int clock = gbus_clock / (4 - sp); unsigned int cycle = 1000000000 / clock; - unsigned int wt, shwt; + unsigned int shwt; + int wt; /* Minimum DIOx- active time */ wt = DIV_ROUND_UP(t->act8b, cycle) - 2; /* IORDY setup time: 35ns */ - wt = max(wt, DIV_ROUND_UP(35, cycle)); + wt = max_t(int, wt, DIV_ROUND_UP(35, cycle)); /* actual wait-cycle is max(wt & ~1, 1) */ if (wt > 2 && (wt & 1)) wt++; @@ -39,10 +40,17 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch, /* Address-valid to DIOR/DIOW setup */ shwt = DIV_ROUND_UP(t->setup, cycle); + /* -DIOx recovery time (SHWT * 4) and cycle time requirement */ + while ((shwt * 4 + wt + (wt ? 2 : 3)) * cycle < t->cycle) + shwt++; + if (shwt > 7) { + pr_warning("tx4938ide: SHWT violation (%d)\n", shwt); + shwt = 7; + } pr_debug("tx4938ide: ebus %d, bus cycle %dns, WT %d, SHWT %d\n", ebus_ch, cycle, wt, shwt); - __raw_writeq((cr & ~(0x3f007ull)) | (wt << 12) | shwt, + __raw_writeq((cr & ~0x3f007ull) | (wt << 12) | shwt, &tx4938_ebuscptr->cr[ebus_ch]); } @@ -228,7 +236,7 @@ static int __init tx4938ide_probe(struct platform_device *pdev) struct resource *res; struct tx4938ide_platform_info *pdata = pdev->dev.platform_data; int irq, ret, i; - unsigned long mapbase; + unsigned long mapbase, mapctl; struct ide_port_info d = tx4938ide_port_info; irq = platform_get_irq(pdev, 0); @@ -242,38 +250,43 @@ static int __init tx4938ide_probe(struct platform_device *pdev) res->end - res->start + 1, "tx4938ide")) return -EBUSY; mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start, - res->end - res->start + 1); - if (!mapbase) + 8 << pdata->ioport_shift); + mapctl = (unsigned long)devm_ioremap(&pdev->dev, + res->start + 0x10000 + + (6 << pdata->ioport_shift), + 1 << pdata->ioport_shift); + if (!mapbase || !mapctl) return -EBUSY; memset(&hw, 0, sizeof(hw)); if (pdata->ioport_shift) { unsigned long port = mapbase; + unsigned long ctl = mapctl; hw.io_ports_array[0] = port; #ifdef __BIG_ENDIAN port++; + ctl++; #endif for (i = 1; i <= 7; i++) hw.io_ports_array[i] = port + (i << pdata->ioport_shift); - hw.io_ports.ctl_addr = - port + 0x10000 + (6 << pdata->ioport_shift); + hw.io_ports.ctl_addr = ctl; } else - ide_std_init_ports(&hw, mapbase, mapbase + 0x10006); + ide_std_init_ports(&hw, mapbase, mapctl); hw.irq = irq; hw.dev = &pdev->dev; - pr_info("TX4938 IDE interface (base %#lx, irq %d)\n", mapbase, hw.irq); + pr_info("TX4938 IDE interface (base %#lx, ctl %#lx, irq %d)\n", + mapbase, mapctl, hw.irq); if (pdata->gbus_clock) tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, 0); else d.port_ops = NULL; ret = ide_host_add(&d, hws, &host); - if (ret) - return ret; - platform_set_drvdata(pdev, host); - return 0; + if (!ret) + platform_set_drvdata(pdev, host); + return ret; } static int __exit tx4938ide_remove(struct platform_device *pdev) diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index 2f83543a9dfc..965cfdb84ebc 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -1828,9 +1828,6 @@ static int dv1394_release(struct inode *inode, struct file *file) /* OK to free the DMA buffer, no more mappings can exist */ do_dv1394_shutdown(video, 1); - /* clean up async I/O users */ - dv1394_fasync(-1, file, 0); - /* give someone else a turn */ clear_bit(0, &video->open); diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index d85af1b67027..eb36a81dd09b 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -358,8 +358,6 @@ static int ib_uverbs_event_close(struct inode *inode, struct file *filp) } spin_unlock_irq(&file->lock); - ib_uverbs_event_fasync(-1, filp, 0); - if (file->is_async) { ib_unregister_event_handler(&file->uverbs_file->event_handler); kref_put(&file->uverbs_file->ref, ib_uverbs_release_file); diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 3524bef62be6..1070db330d35 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -235,7 +235,6 @@ static int evdev_release(struct inode *inode, struct file *file) evdev_ungrab(evdev, client); mutex_unlock(&evdev->mutex); - evdev_fasync(-1, file, 0); evdev_detach_client(evdev, client); kfree(client); diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 65d7077a75a1..a85b1485e774 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -244,7 +244,6 @@ static int joydev_release(struct inode *inode, struct file *file) struct joydev_client *client = file->private_data; struct joydev *joydev = client->joydev; - joydev_fasync(-1, file, 0); joydev_detach_client(joydev, client); kfree(client); diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c index 82ec6b1b6467..216a559f55ea 100644 --- a/drivers/input/misc/hp_sdc_rtc.c +++ b/drivers/input/misc/hp_sdc_rtc.c @@ -71,7 +71,6 @@ static int hp_sdc_rtc_ioctl(struct inode *inode, struct file *file, static unsigned int hp_sdc_rtc_poll(struct file *file, poll_table *wait); static int hp_sdc_rtc_open(struct inode *inode, struct file *file); -static int hp_sdc_rtc_release(struct inode *inode, struct file *file); static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on); static int hp_sdc_rtc_read_proc(char *page, char **start, off_t off, @@ -414,17 +413,6 @@ static int hp_sdc_rtc_open(struct inode *inode, struct file *file) return 0; } -static int hp_sdc_rtc_release(struct inode *inode, struct file *file) -{ - /* Turn off interrupts? */ - - if (file->f_flags & FASYNC) { - hp_sdc_rtc_fasync (-1, file, 0); - } - - return 0; -} - static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on) { return fasync_helper (fd, filp, on, &hp_sdc_rtc_async_queue); @@ -680,7 +668,6 @@ static const struct file_operations hp_sdc_rtc_fops = { .poll = hp_sdc_rtc_poll, .ioctl = hp_sdc_rtc_ioctl, .open = hp_sdc_rtc_open, - .release = hp_sdc_rtc_release, .fasync = hp_sdc_rtc_fasync, }; diff --git a/drivers/input/misc/sgi_btns.c b/drivers/input/misc/sgi_btns.c index ce238f59b3c8..be3a15f5b25d 100644 --- a/drivers/input/misc/sgi_btns.c +++ b/drivers/input/misc/sgi_btns.c @@ -174,5 +174,6 @@ static void __exit sgi_buttons_exit(void) platform_driver_unregister(&sgi_buttons_driver); } +MODULE_LICENSE("GPL"); module_init(sgi_buttons_init); module_exit(sgi_buttons_exit); diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 8137e50ded87..d8c056fe7e98 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -519,7 +519,6 @@ static int mousedev_release(struct inode *inode, struct file *file) struct mousedev_client *client = file->private_data; struct mousedev *mousedev = client->mousedev; - mousedev_fasync(-1, file, 0); mousedev_detach_client(mousedev, client); kfree(client); diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c index 470770c09260..06bbd0e74c6f 100644 --- a/drivers/input/serio/serio_raw.c +++ b/drivers/input/serio/serio_raw.c @@ -135,7 +135,6 @@ static int serio_raw_release(struct inode *inode, struct file *file) mutex_lock(&serio_raw_mutex); - serio_raw_fasync(-1, file, 0); serio_raw_cleanup(serio_raw); mutex_unlock(&serio_raw_mutex); diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c index f1fddb18d70d..1f3cc512eff8 100644 --- a/drivers/leds/leds-da903x.c +++ b/drivers/leds/leds-da903x.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/leds.h> +#include <linux/workqueue.h> #include <linux/mfd/da903x.h> #define DA9030_LED1_CONTROL 0x20 @@ -57,7 +58,7 @@ static void da903x_led_work(struct work_struct *work) offset = DA9030_LED_OFFSET(led->id); val = led->flags & ~0x87; val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */ - val |= (led->new_brightness >> 5) & 0x7; /* PWM<2:0> */ + val |= (0x7 - (led->new_brightness >> 5)) & 0x7; /* PWM<2:0> */ da903x_write(led->master, DA9030_LED1_CONTROL + offset, val); break; case DA9030_ID_VIBRA: diff --git a/drivers/leds/leds-hp-disk.c b/drivers/leds/leds-hp-disk.c index 74645ab15660..44fa757d8254 100644 --- a/drivers/leds/leds-hp-disk.c +++ b/drivers/leds/leds-hp-disk.c @@ -27,7 +27,6 @@ #include <linux/interrupt.h> #include <linux/input.h> #include <linux/kthread.h> -#include <linux/version.h> #include <linux/leds.h> #include <acpi/acpi_drivers.h> diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 92dcc06832a4..9d7b53ed75b2 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -656,9 +656,10 @@ static void do_failures(struct mirror_set *ms, struct bio_list *failures) return; if (!ms->log_failure) { - while ((bio = bio_list_pop(failures))) + while ((bio = bio_list_pop(failures))) { ms->in_sync = 0; dm_rh_mark_nosync(ms->rh, bio, bio->bi_size, 0); + } return; } diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index b2d9d1ac28ad..6c96db26b87c 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -229,19 +229,21 @@ static void __insert_origin(struct origin *o) */ static int register_snapshot(struct dm_snapshot *snap) { - struct origin *o; + struct origin *o, *new_o; struct block_device *bdev = snap->origin->bdev; + new_o = kmalloc(sizeof(*new_o), GFP_KERNEL); + if (!new_o) + return -ENOMEM; + down_write(&_origins_lock); o = __lookup_origin(bdev); - if (!o) { + if (o) + kfree(new_o); + else { /* New origin */ - o = kmalloc(sizeof(*o), GFP_KERNEL); - if (!o) { - up_write(&_origins_lock); - return -ENOMEM; - } + o = new_o; /* Initialise the struct */ INIT_LIST_HEAD(&o->snapshots); @@ -368,6 +370,7 @@ static struct dm_snap_pending_exception *alloc_pending_exception(struct dm_snaps struct dm_snap_pending_exception *pe = mempool_alloc(s->pending_pool, GFP_NOIO); + atomic_inc(&s->pending_exceptions_count); pe->snap = s; return pe; @@ -375,7 +378,11 @@ static struct dm_snap_pending_exception *alloc_pending_exception(struct dm_snaps static void free_pending_exception(struct dm_snap_pending_exception *pe) { - mempool_free(pe, pe->snap->pending_pool); + struct dm_snapshot *s = pe->snap; + + mempool_free(pe, s->pending_pool); + smp_mb__before_atomic_dec(); + atomic_dec(&s->pending_exceptions_count); } static void insert_completed_exception(struct dm_snapshot *s, @@ -600,6 +607,7 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) s->valid = 1; s->active = 0; + atomic_set(&s->pending_exceptions_count, 0); init_rwsem(&s->lock); spin_lock_init(&s->pe_lock); s->ti = ti; @@ -726,6 +734,14 @@ static void snapshot_dtr(struct dm_target *ti) /* After this returns there can be no new kcopyd jobs. */ unregister_snapshot(s); + while (atomic_read(&s->pending_exceptions_count)) + yield(); + /* + * Ensure instructions in mempool_destroy aren't reordered + * before atomic_read. + */ + smp_mb(); + #ifdef CONFIG_DM_DEBUG for (i = 0; i < DM_TRACKED_CHUNK_HASH_SIZE; i++) BUG_ON(!hlist_empty(&s->tracked_chunk_hash[i])); diff --git a/drivers/md/dm-snap.h b/drivers/md/dm-snap.h index f07315fe2362..99c0106ede2d 100644 --- a/drivers/md/dm-snap.h +++ b/drivers/md/dm-snap.h @@ -160,6 +160,8 @@ struct dm_snapshot { mempool_t *pending_pool; + atomic_t pending_exceptions_count; + struct exception_table pending; struct exception_table complete; diff --git a/drivers/md/md.c b/drivers/md/md.c index b4162f6f1b79..9abf6ed16535 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3884,6 +3884,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) if (mode == 0) { mdk_rdev_t *rdev; struct list_head *tmp; + struct block_device *bdev; printk(KERN_INFO "md: %s stopped.\n", mdname(mddev)); @@ -3940,6 +3941,12 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) mddev->degraded = 0; mddev->barriers_work = 0; mddev->safemode = 0; + bdev = bdget_disk(mddev->gendisk, 0); + if (bdev) { + blkdev_ioctl(bdev, 0, BLKRRPART, 0); + bdput(bdev); + } + kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE); } else if (mddev->pers) printk(KERN_INFO "md: %s switched to read-only mode.\n", diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index f5233f3d9eff..b89f476cd0a9 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -559,12 +559,6 @@ mptctl_fasync(int fd, struct file *filep, int mode) return ret; } -static int -mptctl_release(struct inode *inode, struct file *filep) -{ - return fasync_helper(-1, filep, 0, &async_queue); -} - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * MPT ioctl handler @@ -2706,7 +2700,6 @@ mptctl_hp_targetinfo(unsigned long arg) static const struct file_operations mptctl_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .release = mptctl_release, .fasync = mptctl_fasync, .unlocked_ioctl = mptctl_ioctl, #ifdef CONFIG_COMPAT diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 11a617ab4243..84bdc2ee69e6 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -567,8 +567,8 @@ static void i2o_block_biosparam(unsigned long capacity, unsigned short *cyls, /** * i2o_block_open - Open the block device - * @inode: inode for block device being opened - * @file: file to open + * @bdev: block device being opened + * @mode: file open mode * * Power up the device, mount and lock the media. This function is called, * if the block device is opened for access. @@ -596,8 +596,8 @@ static int i2o_block_open(struct block_device *bdev, fmode_t mode) /** * i2o_block_release - Release the I2O block device - * @inode: inode for block device being released - * @file: file to close + * @disk: gendisk device being released + * @mode: file open mode * * Unlock and unmount the media, and power down the device. Gets called if * the block device is closed. @@ -643,8 +643,8 @@ static int i2o_block_getgeo(struct block_device *bdev, struct hd_geometry *geo) /** * i2o_block_ioctl - Issue device specific ioctl calls. - * @inode: inode for block device ioctl - * @file: file for ioctl + * @bdev: block device being opened + * @mode: file open mode * @cmd: ioctl command * @arg: arg * diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c index a3fabdbe6ca6..f3384c32b9a1 100644 --- a/drivers/message/i2o/i2o_config.c +++ b/drivers/message/i2o/i2o_config.c @@ -1097,28 +1097,17 @@ static int cfg_fasync(int fd, struct file *fp, int on) static int cfg_release(struct inode *inode, struct file *file) { ulong id = (ulong) file->private_data; - struct i2o_cfg_info *p1, *p2; + struct i2o_cfg_info *p, **q; unsigned long flags; lock_kernel(); - p1 = p2 = NULL; - spin_lock_irqsave(&i2o_config_lock, flags); - for (p1 = open_files; p1;) { - if (p1->q_id == id) { - - if (p1->fasync) - cfg_fasync(-1, file, 0); - if (p2) - p2->next = p1->next; - else - open_files = p1->next; - - kfree(p1); + for (q = &open_files; (p = *q) != NULL; q = &p->next) { + if (p->q_id == id) { + *q = p->next; + kfree(p); break; } - p2 = p1; - p1 = p1->next; } spin_unlock_irqrestore(&i2o_config_lock, flags); unlock_kernel(); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b550267c8d5e..257277394f8c 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -81,7 +81,7 @@ config MFD_TMIO config MFD_T7L66XB bool "Support Toshiba T7L66XB" - depends on ARM + depends on ARM && HAVE_CLK select MFD_CORE select MFD_TMIO help @@ -89,7 +89,7 @@ config MFD_T7L66XB config MFD_TC6387XB bool "Support Toshiba TC6387XB" - depends on ARM + depends on ARM && HAVE_CLK select MFD_CORE select MFD_TMIO help diff --git a/drivers/misc/hdpuftrs/hdpu_nexus.c b/drivers/misc/hdpuftrs/hdpu_nexus.c index 08e26beefe64..ce39fa54949b 100644 --- a/drivers/misc/hdpuftrs/hdpu_nexus.c +++ b/drivers/misc/hdpuftrs/hdpu_nexus.c @@ -113,7 +113,6 @@ static int hdpu_nexus_probe(struct platform_device *pdev) if (!hdpu_chassis_id) printk(KERN_WARNING "sky_nexus: " "Unable to create proc dir entry: sky_chassis_id\n"); - } return 0; } diff --git a/drivers/misc/panasonic-laptop.c b/drivers/misc/panasonic-laptop.c index a2cb598d8ab5..4a1bc64485d5 100644 --- a/drivers/misc/panasonic-laptop.c +++ b/drivers/misc/panasonic-laptop.c @@ -116,7 +116,6 @@ * */ -#include <linux/version.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile index 35ce28578075..4fc40d8e1bcc 100644 --- a/drivers/misc/sgi-xp/Makefile +++ b/drivers/misc/sgi-xp/Makefile @@ -5,14 +5,14 @@ obj-$(CONFIG_SGI_XP) += xp.o xp-y := xp_main.o xp-$(CONFIG_IA64_SGI_SN2) += xp_sn2.o xp_nofault.o -xp-$(CONFIG_IA64_GENERIC) += xp_sn2.o xp_nofault.o xp_uv.o +xp-$(CONFIG_IA64_GENERIC) += xp_sn2.o xp_nofault.o xp-$(CONFIG_IA64_SGI_UV) += xp_uv.o xp-$(CONFIG_X86_64) += xp_uv.o obj-$(CONFIG_SGI_XP) += xpc.o xpc-y := xpc_main.o xpc_channel.o xpc_partition.o xpc-$(CONFIG_IA64_SGI_SN2) += xpc_sn2.o -xpc-$(CONFIG_IA64_GENERIC) += xpc_sn2.o xpc_uv.o +xpc-$(CONFIG_IA64_GENERIC) += xpc_sn2.o xpc-$(CONFIG_IA64_SGI_UV) += xpc_uv.o xpc-$(CONFIG_X86_64) += xpc_uv.o diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 859a5281c61b..ed1722e50049 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -19,7 +19,11 @@ #include <asm/system.h> #include <asm/sn/arch.h> /* defines is_shub1() and is_shub2() */ #define is_shub() ia64_platform_is("sn2") +#ifdef CONFIG_IA64_SGI_UV #define is_uv() ia64_platform_is("uv") +#else +#define is_uv() 0 +#endif #endif #ifdef CONFIG_X86_64 #include <asm/genapic.h> diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 46325fc84811..e8d5cfbd32c2 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -1104,7 +1104,7 @@ xpc_do_exit(enum xp_retval reason) if (is_shub()) xpc_exit_sn2(); - else + else if (is_uv()) xpc_exit_uv(); } @@ -1363,7 +1363,7 @@ out_2: out_1: if (is_shub()) xpc_exit_sn2(); - else + else if (is_uv()) xpc_exit_uv(); return ret; } diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 5a97d3a9d745..06f07e19dc70 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1920,7 +1920,6 @@ static int sonypi_misc_fasync(int fd, struct file *filp, int on) static int sonypi_misc_release(struct inode *inode, struct file *file) { - sonypi_misc_fasync(-1, file, 0); atomic_dec(&sonypi_compat.open_count); return 0; } @@ -2315,8 +2314,10 @@ end: */ static int sony_pic_disable(struct acpi_device *device) { - if (ACPI_FAILURE(acpi_evaluate_object(device->handle, - "_DIS", NULL, NULL))) + acpi_status ret = acpi_evaluate_object(device->handle, "_DIS", NULL, + NULL); + + if (ACPI_FAILURE(ret) && ret != AE_NOT_FOUND) return -ENXIO; dprintk("Device disabled\n"); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 696cf3647ceb..2fadf323c696 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -391,6 +391,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; WARN_ON(host->mrq != NULL); @@ -402,7 +403,7 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) return; } - spin_lock_irq(&host->lock); + spin_lock_irqsave(&host->lock, flags); host->mrq = mrq; @@ -411,7 +412,7 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) mmci_start_command(host, mrq->cmd, 0); - spin_unlock_irq(&host->lock); + spin_unlock_irqrestore(&host->lock, flags); } static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 3a7bc524af33..c7a4f3bcc2bc 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -94,7 +94,7 @@ #include <asm/io.h> #include <asm/irq.h> -static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; +static char version[] __devinitdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; #ifdef EL3_DEBUG static int el3_debug = EL3_DEBUG; @@ -186,7 +186,7 @@ static int max_interrupt_work = 10; static int nopnp; #endif -static int __init el3_common_init(struct net_device *dev); +static int __devinit el3_common_init(struct net_device *dev); static void el3_common_remove(struct net_device *dev); static ushort id_read_eeprom(int index); static ushort read_eeprom(int ioaddr, int index); @@ -537,7 +537,7 @@ static struct mca_driver el3_mca_driver = { static int mca_registered; #endif /* CONFIG_MCA */ -static int __init el3_common_init(struct net_device *dev) +static int __devinit el3_common_init(struct net_device *dev) { struct el3_private *lp = netdev_priv(dev); int err; diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index c54967f7942a..07a6697e3635 100644 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -644,10 +644,6 @@ This function frees the transmiter and receiver descriptor rings. */ static void amd8111e_free_ring(struct amd8111e_priv* lp) { - - /* Free transmit and receive skbs */ - amd8111e_free_skbs(lp->amd8111e_net_dev); - /* Free transmit and receive descriptor rings */ if(lp->rx_ring){ pci_free_consistent(lp->pci_dev, @@ -833,12 +829,14 @@ static int amd8111e_rx_poll(struct napi_struct *napi, int budget) } while(intr0 & RINT0); - /* Receive descriptor is empty now */ - spin_lock_irqsave(&lp->lock, flags); - __netif_rx_complete(dev, napi); - writel(VAL0|RINTEN0, mmio + INTEN0); - writel(VAL2 | RDMD0, mmio + CMD0); - spin_unlock_irqrestore(&lp->lock, flags); + if (rx_pkt_limit > 0) { + /* Receive descriptor is empty now */ + spin_lock_irqsave(&lp->lock, flags); + __netif_rx_complete(dev, napi); + writel(VAL0|RINTEN0, mmio + INTEN0); + writel(VAL2 | RDMD0, mmio + CMD0); + spin_unlock_irqrestore(&lp->lock, flags); + } rx_not_empty: return num_rx_pkt; @@ -1231,7 +1229,9 @@ static int amd8111e_close(struct net_device * dev) amd8111e_disable_interrupt(lp); amd8111e_stop_chip(lp); - amd8111e_free_ring(lp); + + /* Free transmit and receive skbs */ + amd8111e_free_skbs(lp->amd8111e_net_dev); netif_carrier_off(lp->amd8111e_net_dev); @@ -1241,6 +1241,7 @@ static int amd8111e_close(struct net_device * dev) spin_unlock_irq(&lp->lock); free_irq(dev->irq, dev); + amd8111e_free_ring(lp); /* Update the statistics before closing */ amd8111e_get_stats(dev); diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 0fa53464efb2..6f431a887e7e 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -1080,7 +1080,8 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add init_timer(&lp->check_timer); lp->check_timer.data = (unsigned long)dev; lp->check_timer.function = at91ether_check_link; - } + } else if (lp->board_data.phy_irq_pin >= 32) + gpio_request(lp->board_data.phy_irq_pin, "ethernet_phy"); /* Display ethernet banner */ printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%s)\n", @@ -1167,6 +1168,9 @@ static int __devexit at91ether_remove(struct platform_device *pdev) struct net_device *dev = platform_get_drvdata(pdev); struct at91_private *lp = netdev_priv(dev); + if (lp->board_data.phy_irq_pin >= 32) + gpio_free(lp->board_data.phy_irq_pin); + unregister_netdev(dev); free_irq(dev->irq, dev); dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 3cf59a7f5a1c..246d92b42636 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -2310,7 +2310,8 @@ static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count, if (tpd != ptpd) memcpy(tpd, ptpd, sizeof(struct tx_packet_desc)); tpd->buffer_addr = cpu_to_le64(buffer_info->dma); - tpd->word2 = (cpu_to_le16(buffer_info->length) & + tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT); + tpd->word2 |= (cpu_to_le16(buffer_info->length) & TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT; /* @@ -2409,8 +2410,8 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) | ((vlan_tag >> 9) & 0x8); ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT; - ptpd->word3 |= (vlan_tag & TPD_VL_TAGGED_MASK) << - TPD_VL_TAGGED_SHIFT; + ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) << + TPD_VLANTAG_SHIFT; } tso = atl1_tso(adapter, skb, ptpd); diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h index a5015b14a429..ffa73fc8d95e 100644 --- a/drivers/net/atlx/atl1.h +++ b/drivers/net/atlx/atl1.h @@ -504,7 +504,7 @@ struct rx_free_desc { #define TPD_PKTNT_MASK 0x0001 #define TPD_PKTINT_SHIFT 15 #define TPD_VLANTAG_MASK 0xFFFF -#define TPD_VLAN_SHIFT 16 +#define TPD_VLANTAG_SHIFT 16 /* tpd word 3 bits 0:13 */ #define TPD_EOP_MASK 0x0001 diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index ade5f3f6693b..87437c788476 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -169,11 +169,14 @@ static void tlb_clear_slave(struct bonding *bond, struct slave *slave, int save_ /* clear slave from tx_hashtbl */ tx_hash_table = BOND_ALB_INFO(bond).tx_hashtbl; - index = SLAVE_TLB_INFO(slave).head; - while (index != TLB_NULL_INDEX) { - u32 next_index = tx_hash_table[index].next; - tlb_init_table_entry(&tx_hash_table[index], save_load); - index = next_index; + /* skip this if we've already freed the tx hash table */ + if (tx_hash_table) { + index = SLAVE_TLB_INFO(slave).head; + while (index != TLB_NULL_INDEX) { + u32 next_index = tx_hash_table[index].next; + tlb_init_table_entry(&tx_hash_table[index], save_load); + index = next_index; + } } tlb_init_slave(slave); diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 832739f38db4..a3efba59eee9 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1979,6 +1979,20 @@ void bond_destroy(struct bonding *bond) unregister_netdevice(bond->dev); } +static void bond_destructor(struct net_device *bond_dev) +{ + struct bonding *bond = bond_dev->priv; + + if (bond->wq) + destroy_workqueue(bond->wq); + + netif_addr_lock_bh(bond_dev); + bond_mc_list_destroy(bond); + netif_addr_unlock_bh(bond_dev); + + free_netdev(bond_dev); +} + /* * First release a slave and than destroy the bond if no more slaves iare left. * Must be under rtnl_lock when this function is called. @@ -2376,6 +2390,9 @@ static void bond_miimon_commit(struct bonding *bond) continue; case BOND_LINK_DOWN: + if (slave->link_failure_count < UINT_MAX) + slave->link_failure_count++; + slave->link = BOND_LINK_DOWN; if (bond->params.mode == BOND_MODE_ACTIVEBACKUP || @@ -4550,7 +4567,7 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params) bond_set_mode_ops(bond, bond->params.mode); - bond_dev->destructor = free_netdev; + bond_dev->destructor = bond_destructor; /* Initialize the device options */ bond_dev->tx_queue_len = 0; @@ -4589,20 +4606,6 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params) return 0; } -/* De-initialize device specific data. - * Caller must hold rtnl_lock. - */ -static void bond_deinit(struct net_device *bond_dev) -{ - struct bonding *bond = bond_dev->priv; - - list_del(&bond->bond_list); - -#ifdef CONFIG_PROC_FS - bond_remove_proc_entry(bond); -#endif -} - static void bond_work_cancel_all(struct bonding *bond) { write_lock_bh(&bond->lock); @@ -4624,6 +4627,22 @@ static void bond_work_cancel_all(struct bonding *bond) cancel_delayed_work(&bond->ad_work); } +/* De-initialize device specific data. + * Caller must hold rtnl_lock. + */ +static void bond_deinit(struct net_device *bond_dev) +{ + struct bonding *bond = bond_dev->priv; + + list_del(&bond->bond_list); + + bond_work_cancel_all(bond); + +#ifdef CONFIG_PROC_FS + bond_remove_proc_entry(bond); +#endif +} + /* Unregister and free all bond devices. * Caller must hold rtnl_lock. */ @@ -4635,9 +4654,6 @@ static void bond_free_all(void) struct net_device *bond_dev = bond->dev; bond_work_cancel_all(bond); - netif_addr_lock_bh(bond_dev); - bond_mc_list_destroy(bond); - netif_addr_unlock_bh(bond_dev); /* Release the bonded slaves */ bond_release_all(bond_dev); bond_destroy(bond); diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index 65d0a9103297..7e8a63106bdf 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -32,14 +32,14 @@ #include <linux/skbuff.h> #include <linux/ethtool.h> -#include <asm/arch/svinto.h>/* DMA and register descriptions */ +#include <arch/svinto.h>/* DMA and register descriptions */ #include <asm/io.h> /* CRIS_LED_* I/O functions */ #include <asm/irq.h> #include <asm/dma.h> #include <asm/system.h> #include <asm/ethernet.h> #include <asm/cache.h> -#include <asm/arch/io_interface_mux.h> +#include <arch/io_interface_mux.h> //#define ETHDEBUG #define D(x) diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 82dd1a891ce7..002d918fb4c7 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include <asm/io.h> #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0094" +#define DRV_VERSION "EHEA_0095" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c index 9b61dc9865d1..9d006878f045 100644 --- a/drivers/net/ehea/ehea_qmr.c +++ b/drivers/net/ehea/ehea_qmr.c @@ -632,10 +632,13 @@ static void ehea_rebuild_busmap(void) } } -static int ehea_update_busmap(unsigned long pfn, unsigned long pgnum, int add) +static int ehea_update_busmap(unsigned long pfn, unsigned long nr_pages, int add) { unsigned long i, start_section, end_section; + if (!nr_pages) + return 0; + if (!ehea_bmap) { ehea_bmap = kzalloc(sizeof(struct ehea_bmap), GFP_KERNEL); if (!ehea_bmap) @@ -643,7 +646,7 @@ static int ehea_update_busmap(unsigned long pfn, unsigned long pgnum, int add) } start_section = (pfn * PAGE_SIZE) / EHEA_SECTSIZE; - end_section = start_section + ((pgnum * PAGE_SIZE) / EHEA_SECTSIZE); + end_section = start_section + ((nr_pages * PAGE_SIZE) / EHEA_SECTSIZE); /* Mark entries as valid or invalid only; address is assigned later */ for (i = start_section; i < end_section; i++) { u64 flag; @@ -692,10 +695,54 @@ int ehea_rem_sect_bmap(unsigned long pfn, unsigned long nr_pages) return ret; } -static int ehea_create_busmap_callback(unsigned long pfn, - unsigned long nr_pages, void *arg) +static int ehea_is_hugepage(unsigned long pfn) +{ + int page_order; + + if (pfn & EHEA_HUGEPAGE_PFN_MASK) + return 0; + + page_order = compound_order(pfn_to_page(pfn)); + if (page_order + PAGE_SHIFT != EHEA_HUGEPAGESHIFT) + return 0; + + return 1; +} + +static int ehea_create_busmap_callback(unsigned long initial_pfn, + unsigned long total_nr_pages, void *arg) { - return ehea_update_busmap(pfn, nr_pages, EHEA_BUSMAP_ADD_SECT); + int ret; + unsigned long pfn, start_pfn, end_pfn, nr_pages; + + if ((total_nr_pages * PAGE_SIZE) < EHEA_HUGEPAGE_SIZE) + return ehea_update_busmap(initial_pfn, total_nr_pages, + EHEA_BUSMAP_ADD_SECT); + + /* Given chunk is >= 16GB -> check for hugepages */ + start_pfn = initial_pfn; + end_pfn = initial_pfn + total_nr_pages; + pfn = start_pfn; + + while (pfn < end_pfn) { + if (ehea_is_hugepage(pfn)) { + /* Add mem found in front of the hugepage */ + nr_pages = pfn - start_pfn; + ret = ehea_update_busmap(start_pfn, nr_pages, + EHEA_BUSMAP_ADD_SECT); + if (ret) + return ret; + + /* Skip the hugepage */ + pfn += (EHEA_HUGEPAGE_SIZE / PAGE_SIZE); + start_pfn = pfn; + } else + pfn += (EHEA_SECTSIZE / PAGE_SIZE); + } + + /* Add mem found behind the hugepage(s) */ + nr_pages = pfn - start_pfn; + return ehea_update_busmap(start_pfn, nr_pages, EHEA_BUSMAP_ADD_SECT); } int ehea_create_busmap(void) diff --git a/drivers/net/ehea/ehea_qmr.h b/drivers/net/ehea/ehea_qmr.h index 1e58dc06b7d2..0817c1e74a19 100644 --- a/drivers/net/ehea/ehea_qmr.h +++ b/drivers/net/ehea/ehea_qmr.h @@ -40,6 +40,9 @@ #define EHEA_PAGESIZE (1UL << EHEA_PAGESHIFT) #define EHEA_SECTSIZE (1UL << 24) #define EHEA_PAGES_PER_SECTION (EHEA_SECTSIZE >> EHEA_PAGESHIFT) +#define EHEA_HUGEPAGESHIFT 34 +#define EHEA_HUGEPAGE_SIZE (1UL << EHEA_HUGEPAGESHIFT) +#define EHEA_HUGEPAGE_PFN_MASK ((EHEA_HUGEPAGE_SIZE - 1) >> PAGE_SHIFT) #if ((1UL << SECTION_SIZE_BITS) < EHEA_SECTSIZE) #error eHEA module cannot work if kernel sectionsize < ehea sectionsize diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 64b201134fdb..83a5cb6aa23b 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -586,6 +586,18 @@ static void gfar_configure_serdes(struct net_device *dev) struct gfar_mii __iomem *regs = (void __iomem *)&priv->regs->gfar_mii_regs; int tbipa = gfar_read(&priv->regs->tbipa); + struct mii_bus *bus = gfar_get_miibus(priv); + + if (bus) + mutex_lock(&bus->mdio_lock); + + /* If the link is already up, we must already be ok, and don't need to + * configure and reset the TBI<->SerDes link. Maybe U-Boot configured + * everything for us? Resetting it takes the link down and requires + * several seconds for it to come back. + */ + if (gfar_local_mdio_read(regs, tbipa, MII_BMSR) & BMSR_LSTATUS) + goto done; /* Single clk mode, mii mode off(for serdes communication) */ gfar_local_mdio_write(regs, tbipa, MII_TBICON, TBICON_CLK_SELECT); @@ -596,6 +608,10 @@ static void gfar_configure_serdes(struct net_device *dev) gfar_local_mdio_write(regs, tbipa, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000); + + done: + if (bus) + mutex_unlock(&bus->mdio_lock); } static void init_registers(struct net_device *dev) diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index bf73eea98010..0e2595d24933 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -269,6 +269,27 @@ static struct device_driver gianfar_mdio_driver = { .remove = gfar_mdio_remove, }; +static int match_mdio_bus(struct device *dev, void *data) +{ + const struct gfar_private *priv = data; + const struct platform_device *pdev = to_platform_device(dev); + + return !strcmp(pdev->name, gianfar_mdio_driver.name) && + pdev->id == priv->einfo->mdio_bus; +} + +/* Given a gfar_priv structure, find the mii_bus controlled by this device (not + * necessarily the same as the bus the gfar's PHY is on), if one exists. + * Normally only the first gianfar controls a mii_bus. */ +struct mii_bus *gfar_get_miibus(const struct gfar_private *priv) +{ + /*const*/ struct device *d; + + d = bus_find_device(gianfar_mdio_driver.bus, NULL, (void *)priv, + match_mdio_bus); + return d ? dev_get_drvdata(d) : NULL; +} + int __init gfar_mdio_init(void) { return driver_register(&gianfar_mdio_driver); diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h index 2af28b16a0e2..02dc970ca1ff 100644 --- a/drivers/net/gianfar_mii.h +++ b/drivers/net/gianfar_mii.h @@ -18,6 +18,8 @@ #ifndef __GIANFAR_MII_H #define __GIANFAR_MII_H +struct gfar_private; /* forward ref */ + #define MIIMIND_BUSY 0x00000001 #define MIIMIND_NOTVALID 0x00000004 @@ -44,6 +46,7 @@ int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id, int regnum, u16 value); int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum); +struct mii_bus *gfar_get_miibus(const struct gfar_private *priv); int __init gfar_mdio_init(void); void gfar_mdio_exit(void); #endif /* GIANFAR_PHY_H */ diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 2ee2622258f5..901212aa37cb 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -2605,7 +2605,7 @@ static int __devinit emac_init_config(struct emac_instance *dev) of_device_is_compatible(np, "ibm,emac-440gr")) dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX; if (of_device_is_compatible(np, "ibm,emac-405ez")) { -#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CONTROL +#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x; #else printk(KERN_ERR "%s: Flow control not disabled!\n", diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c index 2482d61662a2..2e67ae015d91 100644 --- a/drivers/net/irda/ks959-sir.c +++ b/drivers/net/irda/ks959-sir.c @@ -118,7 +118,6 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/module.h> #include <linux/kref.h> #include <linux/usb.h> #include <linux/device.h> diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c index 1e0de93fd618..3843b5faba8b 100644 --- a/drivers/net/irda/ksdazzle-sir.c +++ b/drivers/net/irda/ksdazzle-sir.c @@ -82,7 +82,6 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/module.h> #include <linux/kref.h> #include <linux/usb.h> #include <linux/device.h> diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index 3b43bfd85a0f..b1ac63ab8c16 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -76,15 +76,6 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev) skb->protocol = eth_type_trans(skb,dev); -#ifdef LOOPBACK_TSO - if (skb_is_gso(skb)) { - BUG_ON(skb->protocol != htons(ETH_P_IP)); - BUG_ON(ip_hdr(skb)->protocol != IPPROTO_TCP); - - emulate_large_send_offload(skb); - return 0; - } -#endif dev->last_rx = jiffies; /* it's OK to use per_cpu_ptr() because BHs are off */ diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c index 1b0eebf84f76..4b9794e97a79 100644 --- a/drivers/net/mlx4/en_main.c +++ b/drivers/net/mlx4/en_main.c @@ -35,7 +35,6 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/netdevice.h> -#include <linux/cpumask.h> #include <linux/mlx4/driver.h> #include <linux/mlx4/device.h> diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c index be09fdb79cb8..cee199ceba2f 100644 --- a/drivers/net/mlx4/fw.c +++ b/drivers/net/mlx4/fw.c @@ -360,9 +360,9 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) #define QUERY_PORT_ETH_MTU_OFFSET 0x02 #define QUERY_PORT_WIDTH_OFFSET 0x06 #define QUERY_PORT_MAX_GID_PKEY_OFFSET 0x07 -#define QUERY_PORT_MAC_OFFSET 0x08 #define QUERY_PORT_MAX_MACVLAN_OFFSET 0x0a #define QUERY_PORT_MAX_VL_OFFSET 0x0b +#define QUERY_PORT_MAC_OFFSET 0x10 for (i = 1; i <= dev_cap->num_ports; ++i) { err = mlx4_cmd_box(dev, 0, mailbox->dma, i, 0, MLX4_CMD_QUERY_PORT, diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index b1556b2e404c..a5f428bcc0eb 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.3-1.371" +#define MYRI10GE_VERSION_STR "1.4.3-1.375" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index) if (tx->req == tx->done) { tx->queue_active = 0; put_be32(htonl(1), tx->send_stop); + mmiowb(); } __netif_tx_unlock(dev_queue); } @@ -2864,6 +2865,7 @@ again: if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) { tx->queue_active = 1; put_be32(htonl(1), tx->send_go); + mmiowb(); } tx->pkt_start++; if ((avail - count) < MXGEFW_MAX_SEND_DESC) { diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index fc6f4b8c64b3..b646e92134dc 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -399,11 +399,11 @@ static int pppoe_rcv(struct sk_buff *skb, if (skb->len < len) goto drop; - po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex); - if (!po) + if (pskb_trim_rcsum(skb, len)) goto drop; - if (pskb_trim_rcsum(skb, len)) + po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex); + if (!po) goto drop; return sk_receive_skb(sk_pppox(po), skb, 0); diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index c70870e0fd61..6f9895d4e5bd 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2060,7 +2060,6 @@ static int smc_request_attrib(struct platform_device *pdev, struct net_device *ndev) { struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); - struct smc_local *lp = netdev_priv(ndev); if (!res) return 0; @@ -2075,7 +2074,6 @@ static void smc_release_attrib(struct platform_device *pdev, struct net_device *ndev) { struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib"); - struct smc_local *lp = netdev_priv(ndev); if (res) release_mem_region(res->start, ATTRIB_SIZE); diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 8e46a513a252..c91852f49a48 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -420,9 +420,13 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, /* Allocate Tx/Rx descriptor memory */ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + if (!db->desc_pool_ptr) + goto err_out_res; db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); + if (!db->buf_pool_ptr) + goto err_out_free_desc; db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; db->first_tx_desc_dma = db->desc_pool_dma_ptr; @@ -469,7 +473,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, err = register_netdev (dev); if (err) - goto err_out_res; + goto err_out_free_buf; printk(KERN_INFO "%s: Davicom DM%04lx at pci%s, " "%s, irq %d.\n", @@ -483,6 +487,12 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev, return 0; +err_out_free_buf: + pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); +err_out_free_desc: + pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, + db->desc_pool_ptr, db->desc_pool_dma_ptr); err_out_res: pci_release_regions(pdev); err_out_disable: diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 6daea0c91862..33b6d1b122fb 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1070,8 +1070,6 @@ static int tun_chr_close(struct inode *inode, struct file *file) DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name); - tun_chr_fasync(-1, file, 0); - rtnl_lock(); /* Detach from net device */ diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 78df2be8a728..db3377dae9d5 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -396,6 +396,20 @@ static void dm9601_set_multicast(struct net_device *net) dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl); } +static int dm9601_set_mac_address(struct net_device *net, void *p) +{ + struct sockaddr *addr = p; + struct usbnet *dev = netdev_priv(net); + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + + memcpy(net->dev_addr, addr->sa_data, net->addr_len); + dm_write_async(dev, DM_PHY_ADDR, net->addr_len, net->dev_addr); + + return 0; +} + static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; @@ -406,6 +420,7 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->do_ioctl = dm9601_ioctl; dev->net->set_multicast_list = dm9601_set_multicast; + dev->net->set_mac_address = dm9601_set_mac_address; dev->net->ethtool_ops = &dm9601_ethtool_ops; dev->net->hard_header_len += DM_TX_OVERHEAD; dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 2dced383bcfb..3590ea5a902d 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -521,7 +521,7 @@ static void __devexit velocity_remove1(struct pci_dev *pdev) * we don't duplicate code for each option. */ -static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, char *devname) +static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname) { if (val == -1) *opt = def; @@ -550,7 +550,7 @@ static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, * we don't duplicate code for each option. */ -static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, char *devname) +static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, const char *devname) { (*opt) &= (~flag); if (val == -1) @@ -576,7 +576,7 @@ static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 fla * for the current device */ -static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname) +static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname) { velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname); @@ -863,6 +863,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi static int first = 1; struct net_device *dev; int i; + const char *drv_string; const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data]; struct velocity_info *vptr; struct mac_regs __iomem * regs; @@ -935,7 +936,9 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi dev->dev_addr[i] = readb(®s->PAR[i]); - velocity_get_options(&vptr->options, velocity_nics, dev->name); + drv_string = dev_driver_string(&pdev->dev); + + velocity_get_options(&vptr->options, velocity_nics, drv_string); /* * Mask out the options cannot be set to the chip diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index 327d58589e12..6e92f7b44b1a 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -756,10 +756,11 @@ static void sppp_cisco_input (struct sppp *sp, struct sk_buff *skb) case CISCO_ADDR_REQ: /* Stolen from net/ipv4/devinet.c -- SIOCGIFADDR ioctl */ { - struct in_device *in_dev; - struct in_ifaddr *ifa; __be32 addr = 0, mask = htonl(~0U); /* FIXME: is the mask correct? */ #ifdef CONFIG_INET + struct in_device *in_dev; + struct in_ifaddr *ifa; + rcu_read_lock(); if ((in_dev = __in_dev_get_rcu(dev)) != NULL) { diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index ccd9cd35ecbe..5bf7e01ef0e9 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -695,7 +695,6 @@ EXPORT_SYMBOL(z8530_nop); * z8530_interrupt - Handle an interrupt from a Z8530 * @irq: Interrupt number * @dev_id: The Z8530 device that is interrupting. - * @regs: unused * * A Z85[2]30 device has stuck its hand in the air for attention. * We scan both the channels on the chip for events and then call diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 0f1d6bdd51a2..9e47d727e220 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -661,8 +661,7 @@ ath5k_pci_resume(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath5k_softc *sc = hw->priv; - struct ath5k_hw *ah = sc->ah; - int i, err; + int err; pci_restore_state(pdev); @@ -688,16 +687,6 @@ ath5k_pci_resume(struct pci_dev *pdev) goto err_irq; ath5k_led_enable(sc); - /* - * Reset the key cache since some parts do not - * reset the contents on initial power up or resume. - * - * FIXME: This may need to be revisited when mac80211 becomes - * aware of suspend/resume. - */ - for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) - ath5k_hw_reset_key(ah, i); - return 0; err_irq: free_irq(pdev->irq, sc); @@ -718,7 +707,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) struct ath5k_softc *sc = hw->priv; struct ath5k_hw *ah = sc->ah; u8 mac[ETH_ALEN]; - unsigned int i; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device); @@ -737,13 +725,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) __set_bit(ATH_STAT_MRRETRY, sc->status); /* - * Reset the key cache since some parts do not - * reset the contents on initial power up. - */ - for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) - ath5k_hw_reset_key(ah, i); - - /* * Collect the channel list. The 802.11 layer * is resposible for filtering this list based * on settings like the phy mode and regulatory @@ -2202,7 +2183,8 @@ ath5k_beacon_config(struct ath5k_softc *sc) static int ath5k_init(struct ath5k_softc *sc, bool is_resume) { - int ret; + struct ath5k_hw *ah = sc->ah; + int ret, i; mutex_lock(&sc->lock); @@ -2235,10 +2217,17 @@ ath5k_init(struct ath5k_softc *sc, bool is_resume) if (ret) goto done; + /* + * Reset the key cache since some parts do not reset the + * contents on initial power up or resume from suspend. + */ + for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) + ath5k_hw_reset_key(ah, i); + __set_bit(ATH_STAT_STARTED, sc->status); /* Set ack to be sent at low bit-rates */ - ath5k_hw_set_ack_bitrate_high(sc->ah, false); + ath5k_hw_set_ack_bitrate_high(ah, false); mod_timer(&sc->calib_tim, round_jiffies(jiffies + msecs_to_jiffies(ath5k_calinterval * 1000))); @@ -2953,10 +2942,8 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == NL80211_IFTYPE_STATION || - sc->opmode == NL80211_IFTYPE_ADHOC) { + if (sc->opmode == NL80211_IFTYPE_ADHOC) rfilt |= AR5K_RX_FILTER_BEACON; - } /* Set filters */ ath5k_hw_set_rx_filter(ah,rfilt); diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 8f92d670f614..19980cbd5d5f 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -339,7 +339,7 @@ static struct { { ATH5K_DEBUG_BEACON, "beacon", "beacon handling" }, { ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" }, { ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" }, - { ATH5K_DEBUG_LED, "led", "LED mamagement" }, + { ATH5K_DEBUG_LED, "led", "LED management" }, { ATH5K_DEBUG_DUMP_RX, "dumprx", "print received skb content" }, { ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" }, { ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" }, diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index ea2e1a20b499..ceaa6c475c06 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -806,6 +806,8 @@ static const struct ath5k_ini_mode ar5212_rf5111_ini_mode_end[] = { { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, { AR5K_PHY(642), { 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { 0xa228, + { 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5 } }, { 0xa23c, { 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } }, }; diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index 8f1886834e61..1b6d45b6772d 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -537,9 +537,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, mdelay(1); /* - * Write some more initial register settings + * Write some more initial register settings for revised chips */ - if (ah->ah_version == AR5K_AR5212) { + if (ah->ah_version == AR5K_AR5212 && + ah->ah_phy_revision > 0x41) { ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); if (channel->hw_value == CHANNEL_G) @@ -558,19 +559,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, else ath5k_hw_reg_write(ah, 0x00000000, 0x994c); - /* Some bits are disabled here, we know nothing about - * register 0xa228 yet, most of the times this ends up - * with a value 0x9b5 -haven't seen any dump with - * a different value- */ - /* Got this from decompiling binary HAL */ - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffffdff; - ath5k_hw_reg_write(ah, data, 0xa228); - - data = ath5k_hw_reg_read(ah, 0xa228); - data &= 0xfffe03ff; - ath5k_hw_reg_write(ah, data, 0xa228); - data = 0; + /* Got this from legacy-hal */ + AR5K_REG_DISABLE_BITS(ah, 0xa228, 0x200); + + AR5K_REG_MASKED_BITS(ah, 0xa228, 0x800, 0xfffe03ff); /* Just write 0x9b5 ? */ /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 24a1aeb6448f..321dbc8c034a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2090,7 +2090,6 @@ static void iwl_alive_start(struct iwl_priv *priv) iwl4965_error_recovery(priv); iwl_power_update_mode(priv, 1); - ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status)) iwl4965_set_mode(priv, priv->iw_mode); @@ -2342,6 +2341,7 @@ static void iwl_bg_alive_start(struct work_struct *data) mutex_lock(&priv->mutex); iwl_alive_start(priv); mutex_unlock(&priv->mutex); + ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC); } static void iwl4965_bg_rf_kill(struct work_struct *work) diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 297696de2da0..8265c7d25edc 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -605,9 +605,9 @@ int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel, if (ret == 0) { *curlevel = le16_to_cpu(cmd.curlevel); if (minlevel) - *minlevel = le16_to_cpu(cmd.minlevel); + *minlevel = cmd.minlevel; if (maxlevel) - *maxlevel = le16_to_cpu(cmd.maxlevel); + *maxlevel = cmd.maxlevel; } lbs_deb_leave(LBS_DEB_CMD); diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index 5749f22b296f..079e6aa874dc 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -328,7 +328,7 @@ static int process_rxed_802_11_packet(struct lbs_private *priv, lbs_deb_rx("rx err: frame received with bad length\n"); priv->stats.rx_length_errors++; ret = -EINVAL; - kfree(skb); + kfree_skb(skb); goto done; } diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index 8f66903641b9..22c4c6110521 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -598,8 +598,8 @@ static int lbs_process_bss(struct bss_descriptor *bss, switch (elem->id) { case MFIE_TYPE_SSID: - bss->ssid_len = elem->len; - memcpy(bss->ssid, elem->data, elem->len); + bss->ssid_len = min_t(int, 32, elem->len); + memcpy(bss->ssid, elem->data, bss->ssid_len); lbs_deb_scan("got SSID IE: '%s', len %u\n", escape_essid(bss->ssid, bss->ssid_len), bss->ssid_len); diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 2d022f83774c..827ca0384a4c 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -319,7 +319,7 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) void *tmp; int err; u8 *end = (u8 *)eeprom + len; - u16 synth; + u16 synth = 0; DECLARE_MAC_BUF(mac); wrap = (struct eeprom_pda_wrap *) eeprom; @@ -422,7 +422,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) entry = (void *)entry + (entry_len + 1)*2; } - if (!priv->iq_autocal || !priv->output_limit || !priv->curve_data) { + if (!synth || !priv->iq_autocal || !priv->output_limit || + !priv->curve_data) { printk(KERN_ERR "p54: not all required entries found in eeprom!\n"); err = -EINVAL; goto err; diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 1c2a02a741af..88b3cad8b65e 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -346,68 +346,6 @@ static void p54p_tx(struct ieee80211_hw *dev, struct p54_control_hdr *data, printk(KERN_INFO "%s: tx overflow.\n", wiphy_name(dev->wiphy)); } -static int p54p_open(struct ieee80211_hw *dev) -{ - struct p54p_priv *priv = dev->priv; - int err; - - init_completion(&priv->boot_comp); - err = request_irq(priv->pdev->irq, &p54p_interrupt, - IRQF_SHARED, "p54pci", dev); - if (err) { - printk(KERN_ERR "%s: failed to register IRQ handler\n", - wiphy_name(dev->wiphy)); - return err; - } - - memset(priv->ring_control, 0, sizeof(*priv->ring_control)); - err = p54p_upload_firmware(dev); - if (err) { - free_irq(priv->pdev->irq, dev); - return err; - } - priv->rx_idx_data = priv->tx_idx_data = 0; - priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0; - - p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data, - ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data); - - p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt, - ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt); - - P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); - P54P_READ(ring_control_base); - wmb(); - udelay(10); - - P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); - P54P_READ(int_enable); - wmb(); - udelay(10); - - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); - P54P_READ(dev_int); - - if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { - printk(KERN_ERR "%s: Cannot boot firmware!\n", - wiphy_name(dev->wiphy)); - free_irq(priv->pdev->irq, dev); - return -ETIMEDOUT; - } - - P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); - P54P_READ(int_enable); - wmb(); - udelay(10); - - P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); - P54P_READ(dev_int); - wmb(); - udelay(10); - - return 0; -} - static void p54p_stop(struct ieee80211_hw *dev) { struct p54p_priv *priv = dev->priv; @@ -474,6 +412,68 @@ static void p54p_stop(struct ieee80211_hw *dev) memset(ring_control, 0, sizeof(*ring_control)); } +static int p54p_open(struct ieee80211_hw *dev) +{ + struct p54p_priv *priv = dev->priv; + int err; + + init_completion(&priv->boot_comp); + err = request_irq(priv->pdev->irq, &p54p_interrupt, + IRQF_SHARED, "p54pci", dev); + if (err) { + printk(KERN_ERR "%s: failed to register IRQ handler\n", + wiphy_name(dev->wiphy)); + return err; + } + + memset(priv->ring_control, 0, sizeof(*priv->ring_control)); + err = p54p_upload_firmware(dev); + if (err) { + free_irq(priv->pdev->irq, dev); + return err; + } + priv->rx_idx_data = priv->tx_idx_data = 0; + priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0; + + p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data, + ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data); + + p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt, + ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt); + + P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma)); + P54P_READ(ring_control_base); + wmb(); + udelay(10); + + P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); + P54P_READ(int_enable); + wmb(); + udelay(10); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); + P54P_READ(dev_int); + + if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { + printk(KERN_ERR "%s: Cannot boot firmware!\n", + wiphy_name(dev->wiphy)); + p54p_stop(dev); + return -ETIMEDOUT; + } + + P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); + P54P_READ(int_enable); + wmb(); + udelay(10); + + P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); + P54P_READ(dev_int); + wmb(); + udelay(10); + + return 0; +} + static int __devinit p54p_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -556,11 +556,13 @@ static int __devinit p54p_probe(struct pci_dev *pdev, spin_lock_init(&priv->lock); tasklet_init(&priv->rx_tasklet, p54p_rx_tasklet, (unsigned long)dev); - p54p_open(dev); + err = p54p_open(dev); + if (err) + goto err_free_common; err = p54_read_eeprom(dev); p54p_stop(dev); if (err) - goto err_free_desc; + goto err_free_common; err = ieee80211_register_hw(dev); if (err) { @@ -573,8 +575,6 @@ static int __devinit p54p_probe(struct pci_dev *pdev, err_free_common: p54_free_common(dev); - - err_free_desc: pci_free_consistent(pdev, sizeof(*priv->ring_control), priv->ring_control, priv->ring_control_dma); diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index f839ce044afd..95511ac22470 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -1,5 +1,5 @@ menuconfig RT2X00 - bool "Ralink driver support" + tristate "Ralink driver support" depends on MAC80211 && WLAN_80211 && EXPERIMENTAL ---help--- This will enable the experimental support for the Ralink drivers, diff --git a/drivers/of/device.c b/drivers/of/device.c index 51e5214071da..224ae6bc67b6 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -105,7 +105,16 @@ EXPORT_SYMBOL(of_release_dev); int of_device_register(struct of_device *ofdev) { BUG_ON(ofdev->node == NULL); - return device_register(&ofdev->dev); + + device_initialize(&ofdev->dev); + + /* device_add will assume that this device is on the same node as + * the parent. If there is no parent defined, set the node + * explicitly */ + if (!ofdev->dev.parent) + set_dev_node(&ofdev->dev, of_node_to_nid(ofdev->node)); + + return device_add(&ofdev->dev); } EXPORT_SYMBOL(of_device_register); diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index b1899e9c1f65..0cd5fbc7f2c2 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -112,7 +112,7 @@ static int parport_probe(struct pcmcia_device *link) link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 96cf8ecd04ce..bbf66ea8fd87 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -43,20 +43,6 @@ static void __devinit quirk_mellanox_tavor(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor); -/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ -int forbid_dac __read_mostly; -EXPORT_SYMBOL(forbid_dac); - -static __devinit void via_no_dac(struct pci_dev *dev) -{ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { - dev_info(&dev->dev, - "VIA PCI bridge detected. Disabling DAC.\n"); - forbid_dac = 1; - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); - /* Deal with broken BIOS'es that neglect to enable passive release, which can cause problems in combination with the 82441FX/PPro MTRRs */ static void quirk_passive_release(struct pci_dev *dev) diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index f57eeae3830a..222904411a13 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -188,10 +188,6 @@ config PCMCIA_M8XX This driver is also available as a module called m8xx_pcmcia. -config HD64465_PCMCIA - tristate "HD64465 host bridge support" - depends on HD64465 && PCMCIA - config PCMCIA_AU1X00 tristate "Au1x00 pcmcia support" depends on SOC_AU1X00 && PCMCIA diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 23e492bf75cf..238629ad7f7c 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -22,7 +22,6 @@ obj-$(CONFIG_I82365) += i82365.o obj-$(CONFIG_I82092) += i82092.o obj-$(CONFIG_TCIC) += tcic.o obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o -obj-$(CONFIG_HD64465_PCMCIA) += hd64465_ss.o obj-$(CONFIG_PCMCIA_SA1100) += sa11xx_core.o sa1100_cs.o obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o obj-$(CONFIG_M32R_PCC) += m32r_pcc.o diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c deleted file mode 100644 index 9ef69cdb3183..000000000000 --- a/drivers/pcmcia/hd64465_ss.c +++ /dev/null @@ -1,939 +0,0 @@ -/* - * Device driver for the PCMCIA controller module of the - * Hitachi HD64465 handheld companion chip. - * - * Note that the HD64465 provides a very thin PCMCIA host bridge - * layer, requiring a lot of the work of supporting cards to be - * performed by the processor. For example: mapping of card - * interrupts to processor IRQs is done by IRQ demuxing software; - * IO and memory mappings are fixed; setting voltages according - * to card Voltage Select pins etc is done in software. - * - * Note also that this driver uses only the simple, fixed, - * 16MB, 16-bit wide mappings to PCMCIA spaces defined by the - * HD64465. Larger mappings, smaller mappings, or mappings of - * different width to the same socket, are all possible only by - * involving the SH7750's MMU, which is considered unnecessary here. - * The downside is that it may be possible for some drivers to - * break because they need or expect 8-bit mappings. - * - * This driver currently supports only the following configuration: - * SH7750 CPU, HD64465, TPS2206 voltage control chip. - * - * by Greg Banks <gbanks@pocketpenguins.com> - * (c) 2000 PocketPenguins Inc - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/vmalloc.h> -#include <asm/errno.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> - -#include <asm/io.h> -#include <asm/hd64465/hd64465.h> -#include <asm/hd64465/io.h> - -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> -#include <pcmcia/cistpl.h> -#include <pcmcia/ds.h> -#include <pcmcia/ss.h> - -#define MODNAME "hd64465_ss" - -/* #define HD64465_DEBUG 1 */ - -#if HD64465_DEBUG -#define DPRINTK(args...) printk(MODNAME ": " args) -#else -#define DPRINTK(args...) -#endif - -extern int hd64465_io_debug; -extern void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags); -extern void p3_iounmap(void *addr); - -/*============================================================*/ - -#define HS_IO_MAP_SIZE (64*1024) - -typedef struct hs_socket_t -{ - unsigned int number; - u_int irq; - u_long mem_base; - void *io_base; - u_long mem_length; - u_int ctrl_base; - socket_state_t state; - pccard_io_map io_maps[MAX_IO_WIN]; - pccard_mem_map mem_maps[MAX_WIN]; - struct pcmcia_socket socket; -} hs_socket_t; - - - -#define HS_MAX_SOCKETS 2 -static hs_socket_t hs_sockets[HS_MAX_SOCKETS]; - -#define hs_in(sp, r) inb((sp)->ctrl_base + (r)) -#define hs_out(sp, v, r) outb(v, (sp)->ctrl_base + (r)) - - -/* translate a boolean value to a bit in a register */ -#define bool_to_regbit(sp, r, bi, bo) \ - do { \ - unsigned short v = hs_in(sp, r); \ - if (bo) \ - v |= (bi); \ - else \ - v &= ~(bi); \ - hs_out(sp, v, r); \ - } while(0) - -/* register offsets from HD64465_REG_PCC[01]ISR */ -#define ISR 0x0 -#define GCR 0x2 -#define CSCR 0x4 -#define CSCIER 0x6 -#define SCR 0x8 - - -/* Mask and values for CSCIER register */ -#define IER_MASK 0x80 -#define IER_ON 0x3f /* interrupts on */ -#define IER_OFF 0x00 /* interrupts off */ - -/*============================================================*/ - -#if HD64465_DEBUG > 10 - -static void cis_hex_dump(const unsigned char *x, int len) -{ - int i; - - for (i=0 ; i<len ; i++) - { - if (!(i & 0xf)) - printk("\n%08x", (unsigned)(x + i)); - printk(" %02x", *(volatile unsigned short*)x); - x += 2; - } - printk("\n"); -} - -#endif -/*============================================================*/ - -/* - * This code helps create the illusion that the IREQ line from - * the PC card is mapped to one of the CPU's IRQ lines by the - * host bridge hardware (which is how every host bridge *except* - * the HD64465 works). In particular, it supports enabling - * and disabling the IREQ line by code which knows nothing - * about the host bridge (e.g. device drivers, IDE code) using - * the request_irq(), free_irq(), probe_irq_on() and probe_irq_off() - * functions. Also, it supports sharing the mapped IRQ with - * real hardware IRQs from the -IRL0-3 lines. - */ - -#define HS_NUM_MAPPED_IRQS 16 /* Limitation of the PCMCIA code */ -static struct -{ - /* index is mapped irq number */ - hs_socket_t *sock; - hw_irq_controller *old_handler; -} hs_mapped_irq[HS_NUM_MAPPED_IRQS]; - -static void hs_socket_enable_ireq(hs_socket_t *sp) -{ - unsigned short cscier; - - DPRINTK("hs_socket_enable_ireq(sock=%d)\n", sp->number); - - cscier = hs_in(sp, CSCIER); - cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK; - cscier |= HD64465_PCCCSCIER_PIREQE_LEVEL; - hs_out(sp, cscier, CSCIER); -} - -static void hs_socket_disable_ireq(hs_socket_t *sp) -{ - unsigned short cscier; - - DPRINTK("hs_socket_disable_ireq(sock=%d)\n", sp->number); - - cscier = hs_in(sp, CSCIER); - cscier &= ~HD64465_PCCCSCIER_PIREQE_MASK; - hs_out(sp, cscier, CSCIER); -} - -static unsigned int hs_startup_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->startup(irq); - return 0; -} - -static void hs_shutdown_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->shutdown(irq); -} - -static void hs_enable_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->enable(irq); -} - -static void hs_disable_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->disable(irq); -} - -extern struct hw_interrupt_type no_irq_type; - -static void hs_mask_and_ack_irq(unsigned int irq) -{ - hs_socket_disable_ireq(hs_mapped_irq[irq].sock); - /* ack_none() spuriously complains about an unexpected IRQ */ - if (hs_mapped_irq[irq].old_handler != &no_irq_type) - hs_mapped_irq[irq].old_handler->ack(irq); -} - -static void hs_end_irq(unsigned int irq) -{ - hs_socket_enable_ireq(hs_mapped_irq[irq].sock); - hs_mapped_irq[irq].old_handler->end(irq); -} - - -static struct hw_interrupt_type hd64465_ss_irq_type = { - .typename = "PCMCIA-IRQ", - .startup = hs_startup_irq, - .shutdown = hs_shutdown_irq, - .enable = hs_enable_irq, - .disable = hs_disable_irq, - .ack = hs_mask_and_ack_irq, - .end = hs_end_irq -}; - -/* - * This function should only ever be called with interrupts disabled. - */ -static void hs_map_irq(hs_socket_t *sp, unsigned int irq) -{ - struct irq_desc *desc; - - DPRINTK("hs_map_irq(sock=%d irq=%d)\n", sp->number, irq); - - if (irq >= HS_NUM_MAPPED_IRQS) - return; - - desc = irq_to_desc(irq); - hs_mapped_irq[irq].sock = sp; - /* insert ourselves as the irq controller */ - hs_mapped_irq[irq].old_handler = desc->chip; - desc->chip = &hd64465_ss_irq_type; -} - - -/* - * This function should only ever be called with interrupts disabled. - */ -static void hs_unmap_irq(hs_socket_t *sp, unsigned int irq) -{ - struct irq_desc *desc; - - DPRINTK("hs_unmap_irq(sock=%d irq=%d)\n", sp->number, irq); - - if (irq >= HS_NUM_MAPPED_IRQS) - return; - - desc = irq_to_desc(irq); - /* restore the original irq controller */ - desc->chip = hs_mapped_irq[irq].old_handler; -} - -/*============================================================*/ - - -/* - * Set Vpp and Vcc (in tenths of a Volt). Does not - * support the hi-Z state. - * - * Note, this assumes the board uses a TPS2206 chip to control - * the Vcc and Vpp voltages to the hs_sockets. If your board - * uses the MIC2563 (also supported by the HD64465) then you - * will have to modify this function. - */ - /* 0V 3.3V 5.5V */ -static const u_char hs_tps2206_avcc[3] = { 0x00, 0x04, 0x08 }; -static const u_char hs_tps2206_bvcc[3] = { 0x00, 0x80, 0x40 }; - -static int hs_set_voltages(hs_socket_t *sp, int Vcc, int Vpp) -{ - u_int psr; - u_int vcci = 0; - u_int sock = sp->number; - - DPRINTK("hs_set_voltage(%d, %d, %d)\n", sock, Vcc, Vpp); - - switch (Vcc) - { - case 0: vcci = 0; break; - case 33: vcci = 1; break; - case 50: vcci = 2; break; - default: return 0; - } - - /* Note: Vpp = 120 not supported -- Greg Banks */ - if (Vpp != 0 && Vpp != Vcc) - return 0; - - /* The PSR register holds 8 of the 9 bits which control - * the TPS2206 via its serial interface. - */ - psr = inw(HD64465_REG_PCCPSR); - switch (sock) - { - case 0: - psr &= 0x0f; - psr |= hs_tps2206_avcc[vcci]; - psr |= (Vpp == 0 ? 0x00 : 0x02); - break; - case 1: - psr &= 0xf0; - psr |= hs_tps2206_bvcc[vcci]; - psr |= (Vpp == 0 ? 0x00 : 0x20); - break; - }; - outw(psr, HD64465_REG_PCCPSR); - - return 1; -} - - -/*============================================================*/ - -/* - * Drive the RESET line to the card. - */ -static void hs_reset_socket(hs_socket_t *sp, int on) -{ - unsigned short v; - - v = hs_in(sp, GCR); - if (on) - v |= HD64465_PCCGCR_PCCR; - else - v &= ~HD64465_PCCGCR_PCCR; - hs_out(sp, v, GCR); -} - -/*============================================================*/ - -static int hs_init(struct pcmcia_socket *s) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - - DPRINTK("hs_init(%d)\n", sp->number); - - return 0; -} - -/*============================================================*/ - - -static int hs_get_status(struct pcmcia_socket *s, u_int *value) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - unsigned int isr; - u_int status = 0; - - - isr = hs_in(sp, ISR); - - /* Card is seated and powered when *both* CD pins are low */ - if ((isr & HD64465_PCCISR_PCD_MASK) == 0) - { - status |= SS_DETECT; /* card present */ - - switch (isr & HD64465_PCCISR_PBVD_MASK) - { - case HD64465_PCCISR_PBVD_BATGOOD: - break; - case HD64465_PCCISR_PBVD_BATWARN: - status |= SS_BATWARN; - break; - default: - status |= SS_BATDEAD; - break; - } - - if (isr & HD64465_PCCISR_PREADY) - status |= SS_READY; - - if (isr & HD64465_PCCISR_PMWP) - status |= SS_WRPROT; - - /* Voltage Select pins interpreted as per Table 4-5 of the std. - * Assuming we have the TPS2206, the socket is a "Low Voltage - * key, 3.3V and 5V available, no X.XV available". - */ - switch (isr & (HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1)) - { - case HD64465_PCCISR_PVS1: - printk(KERN_NOTICE MODNAME ": cannot handle X.XV card, ignored\n"); - status = 0; - break; - case 0: - case HD64465_PCCISR_PVS2: - /* 3.3V */ - status |= SS_3VCARD; - break; - case HD64465_PCCISR_PVS2|HD64465_PCCISR_PVS1: - /* 5V */ - break; - } - - /* TODO: SS_POWERON */ - /* TODO: SS_STSCHG */ - } - - DPRINTK("hs_get_status(%d) = %x\n", sock, status); - - *value = status; - return 0; -} - -/*============================================================*/ - -static int hs_set_socket(struct pcmcia_socket *s, socket_state_t *state) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - u_long flags; - u_int changed; - unsigned short cscier; - - DPRINTK("hs_set_socket(sock=%d, flags=%x, csc_mask=%x, Vcc=%d, Vpp=%d, io_irq=%d)\n", - sock, state->flags, state->csc_mask, state->Vcc, state->Vpp, state->io_irq); - - local_irq_save(flags); /* Don't want interrupts happening here */ - - if (state->Vpp != sp->state.Vpp || - state->Vcc != sp->state.Vcc) { - if (!hs_set_voltages(sp, state->Vcc, state->Vpp)) { - local_irq_restore(flags); - return -EINVAL; - } - } - -/* hd64465_io_debug = 1; */ - /* - * Handle changes in the Card Status Change mask, - * by propagating to the CSCR register - */ - changed = sp->state.csc_mask ^ state->csc_mask; - cscier = hs_in(sp, CSCIER); - - if (changed & SS_DETECT) { - if (state->csc_mask & SS_DETECT) - cscier |= HD64465_PCCCSCIER_PCDE; - else - cscier &= ~HD64465_PCCCSCIER_PCDE; - } - - if (changed & SS_READY) { - if (state->csc_mask & SS_READY) - cscier |= HD64465_PCCCSCIER_PRE; - else - cscier &= ~HD64465_PCCCSCIER_PRE; - } - - if (changed & SS_BATDEAD) { - if (state->csc_mask & SS_BATDEAD) - cscier |= HD64465_PCCCSCIER_PBDE; - else - cscier &= ~HD64465_PCCCSCIER_PBDE; - } - - if (changed & SS_BATWARN) { - if (state->csc_mask & SS_BATWARN) - cscier |= HD64465_PCCCSCIER_PBWE; - else - cscier &= ~HD64465_PCCCSCIER_PBWE; - } - - if (changed & SS_STSCHG) { - if (state->csc_mask & SS_STSCHG) - cscier |= HD64465_PCCCSCIER_PSCE; - else - cscier &= ~HD64465_PCCCSCIER_PSCE; - } - - hs_out(sp, cscier, CSCIER); - - if (sp->state.io_irq && !state->io_irq) - hs_unmap_irq(sp, sp->state.io_irq); - else if (!sp->state.io_irq && state->io_irq) - hs_map_irq(sp, state->io_irq); - - - /* - * Handle changes in the flags field, - * by propagating to config registers. - */ - changed = sp->state.flags ^ state->flags; - - if (changed & SS_IOCARD) { - DPRINTK("card type: %s\n", - (state->flags & SS_IOCARD ? "i/o" : "memory" )); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCT, - state->flags & SS_IOCARD); - } - - if (changed & SS_RESET) { - DPRINTK("%s reset card\n", - (state->flags & SS_RESET ? "start" : "stop")); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PCCR, - state->flags & SS_RESET); - } - - if (changed & SS_OUTPUT_ENA) { - DPRINTK("%sabling card output\n", - (state->flags & SS_OUTPUT_ENA ? "en" : "dis")); - bool_to_regbit(sp, GCR, HD64465_PCCGCR_PDRV, - state->flags & SS_OUTPUT_ENA); - } - - /* TODO: SS_SPKR_ENA */ - -/* hd64465_io_debug = 0; */ - sp->state = *state; - - local_irq_restore(flags); - -#if HD64465_DEBUG > 10 - if (state->flags & SS_OUTPUT_ENA) - cis_hex_dump((const unsigned char*)sp->mem_base, 0x100); -#endif - return 0; -} - -/*============================================================*/ - -static int hs_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - int map = io->map; - int sock = sp->number; - struct pccard_io_map *sio; - pgprot_t prot; - - DPRINTK("hs_set_io_map(sock=%d, map=%d, flags=0x%x, speed=%dns, start=%#lx, stop=%#lx)\n", - sock, map, io->flags, io->speed, io->start, io->stop); - if (map >= MAX_IO_WIN) - return -EINVAL; - sio = &sp->io_maps[map]; - - /* check for null changes */ - if (io->flags == sio->flags && - io->start == sio->start && - io->stop == sio->stop) - return 0; - - if (io->flags & MAP_AUTOSZ) - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IODYN); - else if (io->flags & MAP_16BIT) - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO16); - else - prot = PAGE_KERNEL_PCC(sock, _PAGE_PCC_IO8); - - /* TODO: handle MAP_USE_WAIT */ - if (io->flags & MAP_USE_WAIT) - printk(KERN_INFO MODNAME ": MAP_USE_WAIT unimplemented\n"); - /* TODO: handle MAP_PREFETCH */ - if (io->flags & MAP_PREFETCH) - printk(KERN_INFO MODNAME ": MAP_PREFETCH unimplemented\n"); - /* TODO: handle MAP_WRPROT */ - if (io->flags & MAP_WRPROT) - printk(KERN_INFO MODNAME ": MAP_WRPROT unimplemented\n"); - /* TODO: handle MAP_0WS */ - if (io->flags & MAP_0WS) - printk(KERN_INFO MODNAME ": MAP_0WS unimplemented\n"); - - if (io->flags & MAP_ACTIVE) { - unsigned long pstart, psize, paddrbase; - - paddrbase = virt_to_phys((void*)(sp->mem_base + 2 * HD64465_PCC_WINDOW)); - pstart = io->start & PAGE_MASK; - psize = ((io->stop + PAGE_SIZE) & PAGE_MASK) - pstart; - - /* - * Change PTEs in only that portion of the mapping requested - * by the caller. This means that most of the time, most of - * the PTEs in the io_vma will be unmapped and only the bottom - * page will be mapped. But the code allows for weird cards - * that might want IO ports > 4K. - */ - sp->io_base = p3_ioremap(paddrbase + pstart, psize, pgprot_val(prot)); - - /* - * Change the mapping used by inb() outb() etc - */ - hd64465_port_map(io->start, - io->stop - io->start + 1, - (unsigned long)sp->io_base + io->start, 0); - } else { - hd64465_port_unmap(sio->start, sio->stop - sio->start + 1); - p3_iounmap(sp->io_base); - } - - *sio = *io; - return 0; -} - -/*============================================================*/ - -static int hs_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *mem) -{ - hs_socket_t *sp = container_of(s, struct hs_socket_t, socket); - struct pccard_mem_map *smem; - int map = mem->map; - unsigned long paddr; - -#if 0 - DPRINTK("hs_set_mem_map(sock=%d, map=%d, flags=0x%x, card_start=0x%08x)\n", - sock, map, mem->flags, mem->card_start); -#endif - - if (map >= MAX_WIN) - return -EINVAL; - smem = &sp->mem_maps[map]; - - paddr = sp->mem_base; /* base of Attribute mapping */ - if (!(mem->flags & MAP_ATTRIB)) - paddr += HD64465_PCC_WINDOW; /* base of Common mapping */ - paddr += mem->card_start; - - /* Because we specified SS_CAP_STATIC_MAP, we are obliged - * at this time to report the system address corresponding - * to the card address requested. This is how Socket Services - * queries our fixed mapping. I wish this fact had been - * documented - Greg Banks. - */ - mem->static_start = paddr; - - *smem = *mem; - - return 0; -} - -/* TODO: do we need to use the MMU to access Common memory ??? */ - -/*============================================================*/ - -/* - * This function is registered with the HD64465 glue code to do a - * secondary demux step on the PCMCIA interrupts. It handles - * mapping the IREQ request from the card to a standard Linux - * IRQ, as requested by SocketServices. - */ -static int hs_irq_demux(int irq, void *dev) -{ - hs_socket_t *sp = dev; - u_int cscr; - - DPRINTK("hs_irq_demux(irq=%d)\n", irq); - - if (sp->state.io_irq && - (cscr = hs_in(sp, CSCR)) & HD64465_PCCCSCR_PIREQ) { - cscr &= ~HD64465_PCCCSCR_PIREQ; - hs_out(sp, cscr, CSCR); - return sp->state.io_irq; - } - - return irq; -} - -/*============================================================*/ - -/* - * Interrupt handling routine. - */ - -static irqreturn_t hs_interrupt(int irq, void *dev) -{ - hs_socket_t *sp = dev; - u_int events = 0; - u_int cscr; - - cscr = hs_in(sp, CSCR); - - DPRINTK("hs_interrupt, cscr=%04x\n", cscr); - - /* check for bus-related changes to be reported to Socket Services */ - if (cscr & HD64465_PCCCSCR_PCDC) { - /* double-check for a 16-bit card, as we don't support CardBus */ - if ((hs_in(sp, ISR) & HD64465_PCCISR_PCD_MASK) != 0) { - printk(KERN_NOTICE MODNAME - ": socket %d, card not a supported card type or not inserted correctly\n", - sp->number); - /* Don't do the rest unless a card is present */ - cscr &= ~(HD64465_PCCCSCR_PCDC| - HD64465_PCCCSCR_PRC| - HD64465_PCCCSCR_PBW| - HD64465_PCCCSCR_PBD| - HD64465_PCCCSCR_PSC); - } else { - cscr &= ~HD64465_PCCCSCR_PCDC; - events |= SS_DETECT; /* card insertion or removal */ - } - } - if (cscr & HD64465_PCCCSCR_PRC) { - cscr &= ~HD64465_PCCCSCR_PRC; - events |= SS_READY; /* ready signal changed */ - } - if (cscr & HD64465_PCCCSCR_PBW) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_BATWARN; /* battery warning */ - } - if (cscr & HD64465_PCCCSCR_PBD) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_BATDEAD; /* battery dead */ - } - if (cscr & HD64465_PCCCSCR_PSC) { - cscr &= ~HD64465_PCCCSCR_PSC; - events |= SS_STSCHG; /* STSCHG (status changed) signal */ - } - - if (cscr & HD64465_PCCCSCR_PIREQ) { - cscr &= ~HD64465_PCCCSCR_PIREQ; - - /* This should have been dealt with during irq demux */ - printk(KERN_NOTICE MODNAME ": unexpected IREQ from card\n"); - } - - hs_out(sp, cscr, CSCR); - - if (events) - pcmcia_parse_events(&sp->socket, events); - - return IRQ_HANDLED; -} - -/*============================================================*/ - -static struct pccard_operations hs_operations = { - .init = hs_init, - .get_status = hs_get_status, - .set_socket = hs_set_socket, - .set_io_map = hs_set_io_map, - .set_mem_map = hs_set_mem_map, -}; - -static int hs_init_socket(hs_socket_t *sp, int irq, unsigned long mem_base, - unsigned int ctrl_base) -{ - unsigned short v; - int i, err; - - memset(sp, 0, sizeof(*sp)); - sp->irq = irq; - sp->mem_base = mem_base; - sp->mem_length = 4*HD64465_PCC_WINDOW; /* 16MB */ - sp->ctrl_base = ctrl_base; - - for (i=0 ; i<MAX_IO_WIN ; i++) - sp->io_maps[i].map = i; - for (i=0 ; i<MAX_WIN ; i++) - sp->mem_maps[i].map = i; - - hd64465_register_irq_demux(sp->irq, hs_irq_demux, sp); - - if ((err = request_irq(sp->irq, hs_interrupt, IRQF_DISABLED, MODNAME, sp)) < 0) - return err; - if (request_mem_region(sp->mem_base, sp->mem_length, MODNAME) == 0) { - sp->mem_base = 0; - return -ENOMEM; - } - - - /* According to section 3.2 of the PCMCIA standard, low-voltage - * capable cards must implement cold insertion, i.e. Vpp and - * Vcc set to 0 before card is inserted. - */ - /*hs_set_voltages(sp, 0, 0);*/ - - /* hi-Z the outputs to the card and set 16MB map mode */ - v = hs_in(sp, GCR); - v &= ~HD64465_PCCGCR_PCCT; /* memory-only card */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - v |= HD64465_PCCGCR_PDRV; /* enable outputs to card */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - v |= HD64465_PCCGCR_PMMOD; /* 16MB mapping mode */ - hs_out(sp, v, GCR); - - v = hs_in(sp, GCR); - /* lowest 16MB of Common */ - v &= ~(HD64465_PCCGCR_PPA25|HD64465_PCCGCR_PPA24); - hs_out(sp, v, GCR); - - hs_reset_socket(sp, 1); - - printk(KERN_INFO "HD64465 PCMCIA bridge socket %d at 0x%08lx irq %d\n", - i, sp->mem_base, sp->irq); - - return 0; -} - -static void hs_exit_socket(hs_socket_t *sp) -{ - unsigned short cscier, gcr; - unsigned long flags; - - local_irq_save(flags); - - /* turn off interrupts in hardware */ - cscier = hs_in(sp, CSCIER); - cscier = (cscier & IER_MASK) | IER_OFF; - hs_out(sp, cscier, CSCIER); - - /* hi-Z the outputs to the card */ - gcr = hs_in(sp, GCR); - gcr &= HD64465_PCCGCR_PDRV; - hs_out(sp, gcr, GCR); - - /* power the card down */ - hs_set_voltages(sp, 0, 0); - - if (sp->mem_base != 0) - release_mem_region(sp->mem_base, sp->mem_length); - if (sp->irq != 0) { - free_irq(sp->irq, hs_interrupt); - hd64465_unregister_irq_demux(sp->irq); - } - - local_irq_restore(flags); -} - -static struct device_driver hd64465_driver = { - .name = "hd64465-pcmcia", - .bus = &platform_bus_type, - .suspend = pcmcia_socket_dev_suspend, - .resume = pcmcia_socket_dev_resume, -}; - -static struct platform_device hd64465_device = { - .name = "hd64465-pcmcia", - .id = 0, -}; - -static int __init init_hs(void) -{ - int i; - unsigned short v; - -/* hd64465_io_debug = 1; */ - if (driver_register(&hd64465_driver)) - return -EINVAL; - - /* Wake both sockets out of STANDBY mode */ - /* TODO: wait 15ms */ - v = inw(HD64465_REG_SMSCR); - v &= ~(HD64465_SMSCR_PC0ST|HD64465_SMSCR_PC1ST); - outw(v, HD64465_REG_SMSCR); - - /* keep power controller out of shutdown mode */ - v = inb(HD64465_REG_PCC0SCR); - v |= HD64465_PCCSCR_SHDN; - outb(v, HD64465_REG_PCC0SCR); - - /* use serial (TPS2206) power controller */ - v = inb(HD64465_REG_PCC0CSCR); - v |= HD64465_PCCCSCR_PSWSEL; - outb(v, HD64465_REG_PCC0CSCR); - - /* - * Setup hs_sockets[] structures and request system resources. - * TODO: on memory allocation failure, power down the socket - * before quitting. - */ - for (i=0; i<HS_MAX_SOCKETS; i++) { - hs_set_voltages(&hs_sockets[i], 0, 0); - - hs_sockets[i].socket.features |= SS_CAP_PCCARD | SS_CAP_STATIC_MAP; /* mappings are fixed in host memory */ - hs_sockets[i].socket.resource_ops = &pccard_static_ops; - hs_sockets[i].socket.irq_mask = 0xffde;/*0xffff*/ /* IRQs mapped in s/w so can do any, really */ - hs_sockets[i].socket.map_size = HD64465_PCC_WINDOW; /* 16MB fixed window size */ - - hs_sockets[i].socket.owner = THIS_MODULE; - hs_sockets[i].socket.ss_entry = &hs_operations; - } - - i = hs_init_socket(&hs_sockets[0], - HD64465_IRQ_PCMCIA0, - HD64465_PCC0_BASE, - HD64465_REG_PCC0ISR); - if (i < 0) { - unregister_driver(&hd64465_driver); - return i; - } - i = hs_init_socket(&hs_sockets[1], - HD64465_IRQ_PCMCIA1, - HD64465_PCC1_BASE, - HD64465_REG_PCC1ISR); - if (i < 0) { - unregister_driver(&hd64465_driver); - return i; - } - -/* hd64465_io_debug = 0; */ - - platform_device_register(&hd64465_device); - - for (i=0; i<HS_MAX_SOCKETS; i++) { - unsigned int ret; - hs_sockets[i].socket.dev.parent = &hd64465_device.dev; - hs_sockets[i].number = i; - ret = pcmcia_register_socket(&hs_sockets[i].socket); - if (ret && i) - pcmcia_unregister_socket(&hs_sockets[0].socket); - } - - return 0; -} - -static void __exit exit_hs(void) -{ - int i; - - for (i=0 ; i<HS_MAX_SOCKETS ; i++) { - pcmcia_unregister_socket(&hs_sockets[i].socket); - hs_exit_socket(&hs_sockets[i]); - } - - platform_device_unregister(&hd64465_device); - unregister_driver(&hd64465_driver); -} - -module_init(init_hs); -module_exit(exit_hs); - -/*============================================================*/ -/*END*/ diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index afea2b2558b5..76d4a98f0955 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -693,8 +693,9 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req) type = 0; if (s->functions > 1) /* All of this ought to be handled higher up */ type = IRQF_SHARED; - if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING) + else if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING) type = IRQF_SHARED; + else printk(KERN_WARNING "pcmcia: Driver needs updating to support IRQ sharing.\n"); #ifdef CONFIG_PCMCIA_PROBE diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index 3688e339db87..773b29cec8be 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -79,6 +79,11 @@ struct da903x_regulator_info { int enable_bit; }; +static inline struct device *to_da903x_dev(struct regulator_dev *rdev) +{ + return rdev_get_dev(rdev)->parent->parent; +} + static inline int check_range(struct da903x_regulator_info *info, int min_uV, int max_uV) { @@ -93,7 +98,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; if (check_range(info, min_uV, max_uV)) { @@ -111,7 +116,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev, static int da903x_get_voltage(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; @@ -128,7 +133,7 @@ static int da903x_get_voltage(struct regulator_dev *rdev) static int da903x_enable(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); return da903x_set_bits(da9034_dev, info->enable_reg, 1 << info->enable_bit); @@ -137,7 +142,7 @@ static int da903x_enable(struct regulator_dev *rdev) static int da903x_disable(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); return da903x_clr_bits(da9034_dev, info->enable_reg, 1 << info->enable_bit); @@ -146,7 +151,7 @@ static int da903x_disable(struct regulator_dev *rdev) static int da903x_is_enabled(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t reg_val; int ret; @@ -162,7 +167,7 @@ static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da903x_dev = rdev_get_dev(rdev)->parent; + struct device *da903x_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; @@ -189,7 +194,7 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da903x_dev = rdev_get_dev(rdev)->parent; + struct device *da903x_dev = to_da903x_dev(rdev); uint8_t val, mask; int thresh; @@ -215,7 +220,7 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev, static int da9030_get_ldo14_voltage(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da903x_dev = rdev_get_dev(rdev)->parent; + struct device *da903x_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; @@ -238,7 +243,7 @@ static int da9034_set_dvc_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; @@ -264,7 +269,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; if (check_range(info, min_uV, max_uV)) { @@ -283,7 +288,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev, static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = rdev_get_dev(rdev)->parent; + struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; @@ -466,7 +471,7 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev) if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15) ri->desc.ops = &da9030_regulator_ldo1_15_ops; - rdev = regulator_register(&ri->desc, pdev->dev.parent, ri); + rdev = regulator_register(&ri->desc, &pdev->dev, ri); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "failed to register regulator %s\n", ri->desc.name); diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 079e9ed907e0..ecdea44ae4e5 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -446,9 +446,6 @@ static int rtc_dev_release(struct inode *inode, struct file *file) if (rtc->ops->release) rtc->ops->release(rtc->dev.parent); - if (file->f_flags & FASYNC) - rtc_dev_fasync(-1, file, 0); - clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags); return 0; } diff --git a/drivers/rtc/rtc-ds3234.c b/drivers/rtc/rtc-ds3234.c index 37d131d03f33..45e5b106af73 100644 --- a/drivers/rtc/rtc-ds3234.c +++ b/drivers/rtc/rtc-ds3234.c @@ -189,7 +189,7 @@ static const struct rtc_class_ops ds3234_rtc_ops = { .set_time = ds3234_set_time, }; -static int ds3234_probe(struct spi_device *spi) +static int __devinit ds3234_probe(struct spi_device *spi) { struct rtc_device *rtc; unsigned char tmp; @@ -249,7 +249,7 @@ static int ds3234_probe(struct spi_device *spi) return 0; } -static int __exit ds3234_remove(struct spi_device *spi) +static int __devexit ds3234_remove(struct spi_device *spi) { struct ds3234 *chip = platform_get_drvdata(spi); struct rtc_device *rtc = chip->rtc; diff --git a/drivers/rtc/rtc-m48t59.c b/drivers/rtc/rtc-m48t59.c index 04b63dab6932..43afb7ab5289 100644 --- a/drivers/rtc/rtc-m48t59.c +++ b/drivers/rtc/rtc-m48t59.c @@ -87,6 +87,10 @@ static int m48t59_rtc_read_time(struct device *dev, struct rtc_time *tm) dev_dbg(dev, "Century bit is enabled\n"); tm->tm_year += 100; /* one century */ } +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + tm->tm_year += 68; +#endif tm->tm_wday = bcd2bin(val & 0x07); tm->tm_hour = bcd2bin(M48T59_READ(M48T59_HOUR) & 0x3F); @@ -110,11 +114,20 @@ static int m48t59_rtc_set_time(struct device *dev, struct rtc_time *tm) struct m48t59_private *m48t59 = platform_get_drvdata(pdev); unsigned long flags; u8 val = 0; + int year = tm->tm_year; + +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + year -= 68; +#endif dev_dbg(dev, "RTC set time %04d-%02d-%02d %02d/%02d/%02d\n", - tm->tm_year + 1900, tm->tm_mon, tm->tm_mday, + year + 1900, tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); + if (year < 0) + return -EINVAL; + spin_lock_irqsave(&m48t59->lock, flags); /* Issue the WRITE command */ M48T59_SET_BITS(M48T59_CNTL_WRITE, M48T59_CNTL); @@ -125,9 +138,9 @@ static int m48t59_rtc_set_time(struct device *dev, struct rtc_time *tm) M48T59_WRITE((bin2bcd(tm->tm_mday) & 0x3F), M48T59_MDAY); /* tm_mon is 0-11 */ M48T59_WRITE((bin2bcd(tm->tm_mon + 1) & 0x1F), M48T59_MONTH); - M48T59_WRITE(bin2bcd(tm->tm_year % 100), M48T59_YEAR); + M48T59_WRITE(bin2bcd(year % 100), M48T59_YEAR); - if (pdata->type == M48T59RTC_TYPE_M48T59 && (tm->tm_year / 100)) + if (pdata->type == M48T59RTC_TYPE_M48T59 && (year / 100)) val = (M48T59_WDAY_CEB | M48T59_WDAY_CB); val |= (bin2bcd(tm->tm_wday) & 0x07); M48T59_WRITE(val, M48T59_WDAY); @@ -159,6 +172,10 @@ static int m48t59_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) M48T59_SET_BITS(M48T59_CNTL_READ, M48T59_CNTL); tm->tm_year = bcd2bin(M48T59_READ(M48T59_YEAR)); +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + tm->tm_year += 68; +#endif /* tm_mon is 0-11 */ tm->tm_mon = bcd2bin(M48T59_READ(M48T59_MONTH)) - 1; @@ -192,11 +209,20 @@ static int m48t59_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) struct rtc_time *tm = &alrm->time; u8 mday, hour, min, sec; unsigned long flags; + int year = tm->tm_year; + +#ifdef CONFIG_SPARC + /* Sun SPARC machines count years since 1968 */ + year -= 68; +#endif /* If no irq, we don't support ALARM */ if (m48t59->irq == NO_IRQ) return -EIO; + if (year < 0) + return -EINVAL; + /* * 0xff means "always match" */ @@ -228,7 +254,7 @@ static int m48t59_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) spin_unlock_irqrestore(&m48t59->lock, flags); dev_dbg(dev, "RTC set alarm time %04d-%02d-%02d %02d/%02d/%02d\n", - tm->tm_year + 1900, tm->tm_mon, tm->tm_mday, + year + 1900, tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); return 0; } diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 910bc704939c..f59277bbedaa 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -455,6 +455,8 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) s3c_rtc_setfreq(&pdev->dev, 1); + device_init_wakeup(&pdev->dev, 1); + /* register RTC and exit */ rtc = rtc_device_register("s3c", &pdev->dev, &s3c_rtcops, @@ -507,7 +509,7 @@ static int s3c_rtc_resume(struct platform_device *pdev) #define s3c_rtc_resume NULL #endif -static struct platform_driver s3c2410_rtcdrv = { +static struct platform_driver s3c2410_rtc_driver = { .probe = s3c_rtc_probe, .remove = __devexit_p(s3c_rtc_remove), .suspend = s3c_rtc_suspend, @@ -523,12 +525,12 @@ static char __initdata banner[] = "S3C24XX RTC, (c) 2004,2006 Simtec Electronics static int __init s3c_rtc_init(void) { printk(banner); - return platform_driver_register(&s3c2410_rtcdrv); + return platform_driver_register(&s3c2410_rtc_driver); } static void __exit s3c_rtc_exit(void) { - platform_driver_unregister(&s3c2410_rtcdrv); + platform_driver_unregister(&s3c2410_rtc_driver); } module_init(s3c_rtc_init); diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 023803dbb0c7..ae18baf59f06 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -76,7 +76,7 @@ tapeblock_trigger_requeue(struct tape_device *device) static void tapeblock_end_request(struct request *req, int error) { - if (__blk_end_request(req, error, blk_rq_bytes(req))) + if (blk_end_request(req, error, blk_rq_bytes(req))) BUG(); } @@ -166,7 +166,7 @@ tapeblock_requeue(struct work_struct *work) { nr_queued++; spin_unlock(get_ccwdev_lock(device->cdev)); - spin_lock(&device->blk_data.request_queue_lock); + spin_lock_irq(&device->blk_data.request_queue_lock); while ( !blk_queue_plugged(queue) && elv_next_request(queue) && @@ -176,7 +176,9 @@ tapeblock_requeue(struct work_struct *work) { if (rq_data_dir(req) == WRITE) { DBF_EVENT(1, "TBLOCK: Rejecting write request\n"); blkdev_dequeue_request(req); + spin_unlock_irq(&device->blk_data.request_queue_lock); tapeblock_end_request(req, -EIO); + spin_lock_irq(&device->blk_data.request_queue_lock); continue; } blkdev_dequeue_request(req); diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index d7073dbf825c..f9bb51fa7f5b 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -1200,7 +1200,7 @@ tape_open(struct tape_device *device) { int rc; - spin_lock(get_ccwdev_lock(device->cdev)); + spin_lock_irq(get_ccwdev_lock(device->cdev)); if (device->tape_state == TS_NOT_OPER) { DBF_EVENT(6, "TAPE:nodev\n"); rc = -ENODEV; @@ -1218,7 +1218,7 @@ tape_open(struct tape_device *device) tape_state_set(device, TS_IN_USE); rc = 0; } - spin_unlock(get_ccwdev_lock(device->cdev)); + spin_unlock_irq(get_ccwdev_lock(device->cdev)); return rc; } @@ -1228,11 +1228,11 @@ tape_open(struct tape_device *device) int tape_release(struct tape_device *device) { - spin_lock(get_ccwdev_lock(device->cdev)); + spin_lock_irq(get_ccwdev_lock(device->cdev)); if (device->tape_state == TS_IN_USE) tape_state_set(device, TS_UNUSED); module_put(device->discipline->owner); - spin_unlock(get_ccwdev_lock(device->cdev)); + spin_unlock_irq(get_ccwdev_lock(device->cdev)); return 0; } diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c index b5390821434f..f05590355be8 100644 --- a/drivers/s390/cio/qdio_debug.c +++ b/drivers/s390/cio/qdio_debug.c @@ -20,6 +20,7 @@ static struct dentry *debugfs_root; #define MAX_DEBUGFS_QUEUES 32 static struct dentry *debugfs_queues[MAX_DEBUGFS_QUEUES] = { NULL }; static DEFINE_MUTEX(debugfs_mutex); +#define QDIO_DEBUGFS_NAME_LEN 40 void qdio_allocate_do_dbf(struct qdio_initialize *init_data) { @@ -152,17 +153,6 @@ static int qstat_seq_open(struct inode *inode, struct file *filp) filp->f_path.dentry->d_inode->i_private); } -static void get_queue_name(struct qdio_q *q, struct ccw_device *cdev, char *name) -{ - memset(name, 0, sizeof(name)); - sprintf(name, "%s", dev_name(&cdev->dev)); - if (q->is_input_q) - sprintf(name + strlen(name), "_input"); - else - sprintf(name + strlen(name), "_output"); - sprintf(name + strlen(name), "_%d", q->nr); -} - static void remove_debugfs_entry(struct qdio_q *q) { int i; @@ -189,14 +179,17 @@ static struct file_operations debugfs_fops = { static void setup_debugfs_entry(struct qdio_q *q, struct ccw_device *cdev) { int i = 0; - char name[40]; + char name[QDIO_DEBUGFS_NAME_LEN]; while (debugfs_queues[i] != NULL) { i++; if (i >= MAX_DEBUGFS_QUEUES) return; } - get_queue_name(q, cdev, name); + snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%s_%d", + dev_name(&cdev->dev), + q->is_input_q ? "input" : "output", + q->nr); debugfs_queues[i] = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR, debugfs_root, q, &debugfs_fops); } diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index a50682d2a0fa..7c8659151993 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1083,7 +1083,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, case -EIO: sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no); QDIO_DBF_TEXT2(1, setup, dbf_text); - qdio_int_error(cdev); return; case -ETIMEDOUT: sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 7de410d5be4a..52d26592c72c 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3025,7 +3025,7 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill, int offset) { - int length = skb->len - offset; + int length = skb->len; int length_here; int element; char *data; @@ -3037,6 +3037,7 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, if (offset >= 0) { data = skb->data + offset; + length -= offset; first_lap = 0; } diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 955ba7a31b90..1b1e80336d2c 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -373,8 +373,6 @@ static int qeth_l2_stop_card(struct qeth_card *card, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); qeth_set_allowed_threads(card, 0, 1); - if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) - return -ERESTARTSYS; if (card->read.state == CH_STATE_UP && card->write.state == CH_STATE_UP && (card->state == CARD_STATE_UP)) { @@ -451,12 +449,15 @@ static void qeth_l2_process_inbound_buffer(struct qeth_card *card, netif_rx(skb); break; case QETH_HEADER_TYPE_OSN: - skb_push(skb, sizeof(struct qeth_hdr)); - skb_copy_to_linear_data(skb, hdr, + if (card->info.type == QETH_CARD_TYPE_OSN) { + skb_push(skb, sizeof(struct qeth_hdr)); + skb_copy_to_linear_data(skb, hdr, sizeof(struct qeth_hdr)); - len = skb->len; - card->osn_info.data_cb(skb); - break; + len = skb->len; + card->osn_info.data_cb(skb); + break; + } + /* else unknown */ default: dev_kfree_skb_any(skb); QETH_DBF_TEXT(TRACE, 3, "inbunkno"); @@ -975,12 +976,6 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1); - if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) { - PRINT_WARN("set_online of card %s interrupted by user!\n", - CARD_BUS_ID(card)); - return -ERESTARTSYS; - } - recover_flag = card->state; rc = ccw_device_set_online(CARD_RDEV(card)); if (rc) { @@ -1091,11 +1086,7 @@ static int __qeth_l2_set_offline(struct ccwgroup_device *cgdev, if (card->dev && netif_carrier_ok(card->dev)) netif_carrier_off(card->dev); recover_flag = card->state; - if (qeth_l2_stop_card(card, recovery_mode) == -ERESTARTSYS) { - PRINT_WARN("Stopping card %s interrupted by user!\n", - CARD_BUS_ID(card)); - return -ERESTARTSYS; - } + qeth_l2_stop_card(card, recovery_mode); rc = ccw_device_set_offline(CARD_DDEV(card)); rc2 = ccw_device_set_offline(CARD_WDEV(card)); rc3 = ccw_device_set_offline(CARD_RDEV(card)); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 99547dea44de..ed59fedd5922 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2064,8 +2064,6 @@ static int qeth_l3_stop_card(struct qeth_card *card, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); qeth_set_allowed_threads(card, 0, 1); - if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) - return -ERESTARTSYS; if (card->read.state == CH_STATE_UP && card->write.state == CH_STATE_UP && (card->state == CARD_STATE_UP)) { @@ -3049,11 +3047,6 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode) QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1); - if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) { - PRINT_WARN("set_online of card %s interrupted by user!\n", - CARD_BUS_ID(card)); - return -ERESTARTSYS; - } recover_flag = card->state; rc = ccw_device_set_online(CARD_RDEV(card)); @@ -3170,11 +3163,7 @@ static int __qeth_l3_set_offline(struct ccwgroup_device *cgdev, if (card->dev && netif_carrier_ok(card->dev)) netif_carrier_off(card->dev); recover_flag = card->state; - if (qeth_l3_stop_card(card, recovery_mode) == -ERESTARTSYS) { - PRINT_WARN("Stopping card %s interrupted by user!\n", - CARD_BUS_ID(card)); - return -ERESTARTSYS; - } + qeth_l3_stop_card(card, recovery_mode); rc = ccw_device_set_offline(CARD_DDEV(card)); rc2 = ccw_device_set_offline(CARD_WDEV(card)); rc3 = ccw_device_set_offline(CARD_RDEV(card)); diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index 210ddb639748..c144b9924d52 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -121,9 +121,6 @@ static ssize_t qeth_l3_dev_route6_show(struct device *dev, if (!card) return -EINVAL; - if (!qeth_is_supported(card, IPA_IPV6)) - return sprintf(buf, "%s\n", "n/a"); - return qeth_l3_dev_route_show(card, &card->options.route6, buf); } @@ -135,10 +132,6 @@ static ssize_t qeth_l3_dev_route6_store(struct device *dev, if (!card) return -EINVAL; - if (!qeth_is_supported(card, IPA_IPV6)) { - return -EOPNOTSUPP; - } - return qeth_l3_dev_route_store(card, &card->options.route6, QETH_PROT_IPV6, buf, count); } diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c index c33bcb284df7..56f4e6bffc21 100644 --- a/drivers/scsi/fdomain.c +++ b/drivers/scsi/fdomain.c @@ -290,9 +290,11 @@ #include <scsi/scsi_ioctl.h> #include "fdomain.h" +#ifndef PCMCIA MODULE_AUTHOR("Rickard E. Faith"); MODULE_DESCRIPTION("Future domain SCSI driver"); MODULE_LICENSE("GPL"); +#endif #define VERSION "$Revision: 5.51 $" diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index afe1de998763..a454f94623d7 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2988,17 +2988,6 @@ static int megasas_mgmt_open(struct inode *inode, struct file *filep) } /** - * megasas_mgmt_release - char node "release" entry point - */ -static int megasas_mgmt_release(struct inode *inode, struct file *filep) -{ - filep->private_data = NULL; - fasync_helper(-1, filep, 0, &megasas_async_queue); - - return 0; -} - -/** * megasas_mgmt_fasync - Async notifier registration from applications * * This function adds the calling process to a driver global queue. When an @@ -3345,7 +3334,6 @@ megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd, static const struct file_operations megasas_mgmt_fops = { .owner = THIS_MODULE, .open = megasas_mgmt_open, - .release = megasas_mgmt_release, .fasync = megasas_mgmt_fasync, .unlocked_ioctl = megasas_mgmt_ioctl, #ifdef CONFIG_COMPAT diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 9adf35bd8b56..5103855242ae 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -327,7 +327,6 @@ sg_release(struct inode *inode, struct file *filp) if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; SCSI_LOG_TIMEOUT(3, printk("sg_release: %s\n", sdp->disk->disk_name)); - sg_fasync(-1, filp, 0); /* remove filp from async notification list */ if (0 == sg_remove_sfp(sdp, sfp)) { /* Returns 1 when sdp gone */ if (!sdp->detached) { scsi_device_put(sdp->device); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index c94d3c4b7521..579d63a81aa2 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1276,7 +1276,7 @@ config SERIAL_SGI_IOC3 say Y or M. Otherwise, say N. config SERIAL_NETX - bool "NetX serial port support" + tristate "NetX serial port support" depends on ARM && ARCH_NETX select SERIAL_CORE help @@ -1288,7 +1288,7 @@ config SERIAL_NETX config SERIAL_NETX_CONSOLE bool "Console on NetX serial port" - depends on SERIAL_NETX + depends on SERIAL_NETX=y select SERIAL_CORE_CONSOLE help If you have enabled the serial port on the Hilscher NetX SoC diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 211c21797ce0..8b2c619a09f2 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -34,14 +34,14 @@ static char *serial_version = "$Revision: 1.25 $"; #include <asm/system.h> #include <linux/delay.h> -#include <asm/arch/svinto.h> +#include <arch/svinto.h> /* non-arch dependent serial structures are in linux/serial.h */ #include <linux/serial.h> /* while we keep our own stuff (struct e100_serial) in a local .h file */ #include "crisv10.h" #include <asm/fasttimer.h> -#include <asm/arch/io_interface_mux.h> +#include <arch/io_interface_mux.h> #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER #ifndef CONFIG_ETRAX_FAST_TIMER diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h index e3c5c8c3c09b..f36a729280bc 100644 --- a/drivers/serial/crisv10.h +++ b/drivers/serial/crisv10.h @@ -10,7 +10,7 @@ #include <linux/circ_buf.h> #include <asm/termios.h> #include <asm/dma.h> -#include <asm/arch/io_interface_mux.h> +#include <arch/io_interface_mux.h> /* Software state per channel */ diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c index 3f489329e8d3..3e5dda8518b7 100644 --- a/drivers/serial/netx-serial.c +++ b/drivers/serial/netx-serial.c @@ -42,8 +42,6 @@ #define SERIAL_NX_MAJOR 204 #define MINOR_START 170 -#ifdef CONFIG_SERIAL_NETX_CONSOLE - enum uart_regs { UART_DR = 0x00, UART_SR = 0x04, @@ -528,6 +526,8 @@ static struct netx_port netx_ports[] = { } }; +#ifdef CONFIG_SERIAL_NETX_CONSOLE + static void netx_console_putchar(struct uart_port *port, int ch) { while (readl(port->membase + UART_FR) & FR_BUSY); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index f0658d2c45b2..5c0f32c7fbf6 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -250,8 +250,7 @@ static inline void h8300_sci_disable(struct uart_port *port) } #endif -#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \ - defined(__H8300H__) || defined(__H8300S__) +#if defined(__H8300H__) || defined(__H8300S__) static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag) { int ch = (port->mapbase - SMR0) >> 3; @@ -285,11 +284,6 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) #define sci_init_pins_irda NULL #endif -#ifdef SCI_ONLY -#define sci_init_pins_scif NULL -#endif - -#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag) { @@ -449,7 +443,6 @@ static inline int scif_rxroom(struct uart_port *port) return sci_in(port, SCFDR) & SCIF_RFDC_MASK; } #endif -#endif /* SCIF_ONLY || SCI_AND_SCIF */ static inline int sci_txroom(struct uart_port *port) { @@ -485,11 +478,9 @@ static void sci_transmit_chars(struct uart_port *port) return; } -#ifndef SCI_ONLY if (port->type == PORT_SCIF) count = scif_txroom(port); else -#endif count = sci_txroom(port); do { @@ -519,12 +510,10 @@ static void sci_transmit_chars(struct uart_port *port) } else { ctrl = sci_in(port, SCSCR); -#if !defined(SCI_ONLY) if (port->type == PORT_SCIF) { sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } -#endif ctrl |= SCI_CTRL_FLAGS_TIE; sci_out(port, SCSCR, ctrl); @@ -547,11 +536,9 @@ static inline void sci_receive_chars(struct uart_port *port) return; while (1) { -#if !defined(SCI_ONLY) if (port->type == PORT_SCIF) count = scif_rxroom(port); else -#endif count = sci_rxroom(port); /* Don't copy more bytes than there is room for in the buffer */ @@ -810,26 +797,27 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { - unsigned short ssr_status, scr_status; - struct uart_port *port = ptr; + unsigned short ssr_status, scr_status; + struct uart_port *port = ptr; + irqreturn_t ret = IRQ_NONE; ssr_status = sci_in(port,SCxSR); scr_status = sci_in(port,SCSCR); /* Tx Interrupt */ - if ((ssr_status & 0x0020) && (scr_status & 0x0080)) - sci_tx_interrupt(irq, ptr); + if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE)) + ret = sci_tx_interrupt(irq, ptr); /* Rx Interrupt */ - if ((ssr_status & 0x0002) && (scr_status & 0x0040)) - sci_rx_interrupt(irq, ptr); + if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE)) + ret = sci_rx_interrupt(irq, ptr); /* Error Interrupt */ - if ((ssr_status & 0x0080) && (scr_status & 0x0400)) - sci_er_interrupt(irq, ptr); + if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE)) + ret = sci_er_interrupt(irq, ptr); /* Break Interrupt */ - if ((ssr_status & 0x0010) && (scr_status & 0x0200)) - sci_br_interrupt(irq, ptr); + if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE)) + ret = sci_br_interrupt(irq, ptr); - return IRQ_HANDLED; + return ret; } #if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK) @@ -1054,10 +1042,8 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ -#if !defined(SCI_ONLY) if (port->type == PORT_SCIF) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); -#endif smr_val = sci_in(port, SCSMR) & 3; if ((termios->c_cflag & CSIZE) == CS7) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 7cd28b226800..6163a45f968f 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -16,7 +16,6 @@ # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_AND_SCIF #elif defined(CONFIG_CPU_SUBTYPE_SH7705) # define SCIF0 0xA4400000 # define SCIF2 0xA4410000 @@ -30,17 +29,15 @@ * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output */ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCIF_ONLY #define SCIF_ORER 0x0200 /* overrun error bit */ #elif defined(CONFIG_SH_RTS7751R2D) +# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ @@ -53,28 +50,24 @@ # define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) -# define SCI_AND_SCIF #elif defined(CONFIG_CPU_SUBTYPE_SH7760) # define SCSPTR0 0xfe600024 /* 16 bit SCIF */ # define SCSPTR1 0xfe610024 /* 16 bit SCIF */ # define SCSPTR2 0xfe620024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define PACR 0xa4050100 # define PBCR 0xa4050102 # define SCSCR_INIT(port) 0x3B -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7343) # define SCSPTR0 0xffe00010 /* 16 bit SCIF */ # define SCSPTR1 0xffe10010 /* 16 bit SCIF */ # define SCSPTR2 0xffe20010 /* 16 bit SCIF */ # define SCSPTR3 0xffe30010 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7722) # define PADR 0xA4050120 # define PSDR 0xA405013e @@ -82,7 +75,6 @@ # define PSCR 0xA405011E # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7366) # define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ # define SCSPTR0 SCPDR0 @@ -97,12 +89,10 @@ # define SCSPTR5 0xa4050128 # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) # define SCIF_BASE_ADDR 0x01030000 # define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR @@ -111,14 +101,11 @@ # define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ # define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_H83007) || defined(CONFIG_H83068) # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_ONLY # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_H8S2678) # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_ONLY # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ @@ -126,20 +113,17 @@ # define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ # define SCSPTR1 0xff924020 /* 16 bit SCIF */ # define SCSPTR2 0xff925020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe10024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7785) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ # define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ @@ -149,7 +133,6 @@ # define SCSPTR5 0xffef0024 /* 16 bit SCIF */ # define SCIF_OPER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ defined(CONFIG_CPU_SUBTYPE_SH7206) || \ defined(CONFIG_CPU_SUBTYPE_SH7263) @@ -158,14 +141,12 @@ # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ # define SCSPTR3 0xfffe9820 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7619) # define SCSPTR0 0xf8400020 /* 16 bit SCIF */ # define SCSPTR1 0xf8410020 /* 16 bit SCIF */ # define SCSPTR2 0xf8420020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SHX3) # define SCSPTR0 0xffc30020 /* 16 bit SCIF */ # define SCSPTR1 0xffc40020 /* 16 bit SCIF */ @@ -173,7 +154,6 @@ # define SCSPTR3 0xffc60020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #else # error CPU subtype not defined #endif @@ -186,6 +166,7 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7091) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7722) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ @@ -244,55 +225,28 @@ # define SCIF_TXROOM_MAX 16 #endif -#if defined(SCI_ONLY) -# define SCxSR_TEND(port) SCI_TEND -# define SCxSR_ERRORS(port) SCI_ERRORS -# define SCxSR_RDxF(port) SCI_RDRF -# define SCxSR_TDxE(port) SCI_TDRE -# define SCxSR_ORER(port) SCI_ORER -# define SCxSR_FER(port) SCI_FER -# define SCxSR_PER(port) SCI_PER -# define SCxSR_BRK(port) 0x00 -# define SCxSR_RDxF_CLEAR(port) 0xbc -# define SCxSR_ERROR_CLEAR(port) 0xc4 -# define SCxSR_TDxE_CLEAR(port) 0x78 -# define SCxSR_BREAK_CLEAR(port) 0xc4 -#elif defined(SCIF_ONLY) -# define SCxSR_TEND(port) SCIF_TEND -# define SCxSR_ERRORS(port) SCIF_ERRORS -# define SCxSR_RDxF(port) SCIF_RDF -# define SCxSR_TDxE(port) SCIF_TDFE +#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) +#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) +#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) +#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) +#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) +#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) +#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) + #if defined(CONFIG_CPU_SUBTYPE_SH7705) -# define SCxSR_ORER(port) SCIF_ORER +# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) #else -# define SCxSR_ORER(port) 0x0000 +# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000) #endif -# define SCxSR_FER(port) SCIF_FER -# define SCxSR_PER(port) SCIF_PER -# define SCxSR_BRK(port) SCIF_BRK + #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) -# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc) -# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73) -# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf) -# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3) -#else -/* SH7705 can also use this, clearing is same between 7705 and 7709 */ -# define SCxSR_RDxF_CLEAR(port) 0x00fc -# define SCxSR_ERROR_CLEAR(port) 0x0073 -# define SCxSR_TDxE_CLEAR(port) 0x00df -# define SCxSR_BREAK_CLEAR(port) 0x00e3 -#endif +# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) +# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) +# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) +# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3) #else -# define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) -# define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) -# define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) -# define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) -# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000) -# define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) -# define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) -# define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) # define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) # define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) # define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) @@ -574,18 +528,20 @@ static inline int sci_rxd_in(struct uart_port *port) defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH4_202) + defined(CONFIG_CPU_SUBTYPE_SH7091) static inline int sci_rxd_in(struct uart_port *port) { -#ifndef SCIF_ONLY if (port->mapbase == 0xffe00000) return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ -#endif -#ifndef SCI_ONLY if (port->mapbase == 0xffe80000) return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ -#endif + return 1; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffe80000) + return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7760) @@ -651,7 +607,7 @@ static inline int sci_rxd_in(struct uart_port *port) #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) static inline int sci_rxd_in(struct uart_port *port) { - return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */ + return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ } #elif defined(__H8300H__) || defined(__H8300S__) static inline int sci_rxd_in(struct uart_port *port) diff --git a/drivers/staging/me4000/me4000.c b/drivers/staging/me4000/me4000.c index 0b33773bb4f6..cf8b01bcac8d 100644 --- a/drivers/staging/me4000/me4000.c +++ b/drivers/staging/me4000/me4000.c @@ -1633,9 +1633,6 @@ static int me4000_release(struct inode *inode_p, struct file *file_p) free_irq(ext_int_context->irq, ext_int_context); - /* Delete the fasync structure and free memory */ - me4000_ext_int_fasync(0, file_p, 0); - /* Mark as unused */ ext_int_context->in_use = 0; } else { diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c index 41b6530b8f25..a913efc69669 100644 --- a/drivers/telephony/ixj.c +++ b/drivers/telephony/ixj.c @@ -2328,7 +2328,6 @@ static int ixj_release(struct inode *inode, struct file *file_p) j->rec_codec = j->play_codec = 0; j->rec_frame_size = j->play_frame_size = 0; j->flags.cidsent = j->flags.cidring = 0; - ixj_fasync(-1, file_p, 0); /* remove from list of async notification */ if(j->cardtype == QTI_LINEJACK && !j->readers && !j->writers) { ixj_set_port(j, PORT_PSTN); diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index f9b4647255aa..2d2440cd57a9 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -367,9 +367,6 @@ static int uio_release(struct inode *inode, struct file *filep) ret = idev->info->release(idev->info, inode); module_put(idev->owner); - - if (filep->f_flags & FASYNC) - ret = uio_fasync(-1, filep, 0); kfree(listener); return ret; } diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 543811f6e6e8..8e74657f106c 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -133,7 +133,7 @@ static int usbtmc_release(struct inode *inode, struct file *file) static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data) { - char *buffer; + u8 *buffer; struct device *dev; int rv; int n; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index fc9018e72a09..e1b42626d04d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -106,6 +106,9 @@ static DEFINE_SPINLOCK(hcd_root_hub_lock); /* used when updating an endpoint's URB list */ static DEFINE_SPINLOCK(hcd_urb_list_lock); +/* used to protect against unlinking URBs after the device is gone */ +static DEFINE_SPINLOCK(hcd_urb_unlink_lock); + /* wait queue for synchronous unlinks */ DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue); @@ -1376,10 +1379,25 @@ static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status) int usb_hcd_unlink_urb (struct urb *urb, int status) { struct usb_hcd *hcd; - int retval; + int retval = -EIDRM; + unsigned long flags; - hcd = bus_to_hcd(urb->dev->bus); - retval = unlink1(hcd, urb, status); + /* Prevent the device and bus from going away while + * the unlink is carried out. If they are already gone + * then urb->use_count must be 0, since disconnected + * devices can't have any active URBs. + */ + spin_lock_irqsave(&hcd_urb_unlink_lock, flags); + if (atomic_read(&urb->use_count) > 0) { + retval = 0; + usb_get_dev(urb->dev); + } + spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags); + if (retval == 0) { + hcd = bus_to_hcd(urb->dev->bus); + retval = unlink1(hcd, urb, status); + usb_put_dev(urb->dev); + } if (retval == 0) retval = -EINPROGRESS; @@ -1528,6 +1546,17 @@ void usb_hcd_disable_endpoint(struct usb_device *udev, hcd->driver->endpoint_disable(hcd, ep); } +/* Protect against drivers that try to unlink URBs after the device + * is gone, by waiting until all unlinks for @udev are finished. + * Since we don't currently track URBs by device, simply wait until + * nothing is running in the locked region of usb_hcd_unlink_urb(). + */ +void usb_hcd_synchronize_unlinks(struct usb_device *udev) +{ + spin_lock_irq(&hcd_urb_unlink_lock); + spin_unlock_irq(&hcd_urb_unlink_lock); +} + /*-------------------------------------------------------------------------*/ /* called in any context */ diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 2dcde61c465e..9465e70f4dd0 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -232,6 +232,7 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); extern void usb_hcd_disable_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); +extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); extern int usb_hcd_get_frame_number(struct usb_device *udev); extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9b3f16bd12cb..b19cbfcd51da 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -659,6 +659,9 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func2); schedule_delayed_work(&hub->init_work, msecs_to_jiffies(delay)); + + /* Suppress autosuspend until init is done */ + to_usb_interface(hub->intfdev)->pm_usage_cnt = 1; return; /* Continues at init2: below */ } else { hub_power_on(hub, true); @@ -1429,6 +1432,7 @@ void usb_disconnect(struct usb_device **pdev) */ dev_dbg (&udev->dev, "unregistering device\n"); usb_disable_device(udev, 0); + usb_hcd_synchronize_unlinks(udev); usb_unlock_device(udev); diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index f2638009a464..4342bd9c3bb6 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -474,6 +474,12 @@ EXPORT_SYMBOL_GPL(usb_submit_urb); * indicating that the request has been canceled (rather than any other * code). * + * Drivers should not call this routine or related routines, such as + * usb_kill_urb() or usb_unlink_anchored_urbs(), after their disconnect + * method has returned. The disconnect function should synchronize with + * a driver's I/O routines to insure that all URB-related activity has + * completed before it returns. + * * This request is always asynchronous. Success is indicated by * returning -EINPROGRESS, at which time the URB will probably not yet * have been given back to the device driver. When it is eventually @@ -550,6 +556,9 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb); * This routine may not be used in an interrupt context (such as a bottom * half or a completion handler), or when holding a spinlock, or in other * situations where the caller can't schedule(). + * + * This routine should not be called by a driver after its disconnect + * method has returned. */ void usb_kill_urb(struct urb *urb) { @@ -588,6 +597,9 @@ EXPORT_SYMBOL_GPL(usb_kill_urb); * This routine may not be used in an interrupt context (such as a bottom * half or a completion handler), or when holding a spinlock, or in other * situations where the caller can't schedule(). + * + * This routine should not be called by a driver after its disconnect + * method has returned. */ void usb_poison_urb(struct urb *urb) { @@ -622,6 +634,9 @@ EXPORT_SYMBOL_GPL(usb_unpoison_urb); * * this allows all outstanding URBs to be killed starting * from the back of the queue + * + * This routine should not be called by a driver after its disconnect + * method has returned. */ void usb_kill_anchored_urbs(struct usb_anchor *anchor) { @@ -651,6 +666,9 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs); * this allows all outstanding URBs to be poisoned starting * from the back of the queue. Newly added URBs will also be * poisoned + * + * This routine should not be called by a driver after its disconnect + * method has returned. */ void usb_poison_anchored_urbs(struct usb_anchor *anchor) { @@ -672,6 +690,7 @@ void usb_poison_anchored_urbs(struct usb_anchor *anchor) spin_unlock_irq(&anchor->lock); } EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs); + /** * usb_unlink_anchored_urbs - asynchronously cancel transfer requests en masse * @anchor: anchor the requests are bound to @@ -680,6 +699,9 @@ EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs); * from the back of the queue. This function is asynchronous. * The unlinking is just tiggered. It may happen after this * function has returned. + * + * This routine should not be called by a driver after its disconnect + * method has returned. */ void usb_unlink_anchored_urbs(struct usb_anchor *anchor) { diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index f4585d3e90d7..eeb26c0f88e5 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1251,7 +1251,6 @@ dev_release (struct inode *inode, struct file *fd) * alternatively, all host requests will time out. */ - fasync_helper (-1, fd, 0, &dev->fasync); kfree (dev->buf); dev->buf = NULL; put_dev (dev); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 8be3f39891c7..794b5ffe4397 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -281,6 +281,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp) if (tty->driver_data) tty->driver_data = NULL; tty_port_tty_set(&port->port, NULL); + tty_kref_put(tty); } } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a2b9ebbef38e..fb9e20e624c1 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -333,6 +333,13 @@ UNUSUAL_DEV( 0x0482, 0x0103, 0x0100, 0x0100, "Finecam S5", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), +/* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */ +UNUSUAL_DEV( 0x0482, 0x0107, 0x0100, 0x0100, + "Kyocera", + "CONTAX SL300R T*", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE), + /* Reported by Paul Stewart <stewart@wetlogic.net> * This entry is needed because the device reports Sub=ff */ UNUSUAL_DEV( 0x04a4, 0x0004, 0x0001, 0x0001, diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c index 2afd47eefe74..f8a4bb20f41a 100644 --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -439,7 +439,7 @@ static int corgi_bl_update_status(struct backlight_device *bd) return corgi_bl_set_intensity(lcd, intensity); } -void corgibl_limit_intensity(int limit) +void corgi_lcd_limit_intensity(int limit) { if (limit) corgibl_flags |= CORGIBL_BATTLOW; @@ -448,7 +448,7 @@ void corgibl_limit_intensity(int limit) backlight_update_status(the_corgi_lcd->bl_dev); } -EXPORT_SYMBOL(corgibl_limit_intensity); +EXPORT_SYMBOL(corgi_lcd_limit_intensity); static struct backlight_ops corgi_bl_ops = { .get_brightness = corgi_bl_get_intensity, diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 048b139f0e50..8a8760230bc7 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -2049,7 +2049,7 @@ static void cirrusfb_pci_unmap(struct fb_info *info) #endif /* CONFIG_PCI */ #ifdef CONFIG_ZORRO -static void __devexit cirrusfb_zorro_unmap(struct fb_info *info) +static void cirrusfb_zorro_unmap(struct fb_info *info) { struct cirrusfb_info *cinfo = info->par; struct zorro_dev *zdev = to_zorro_dev(info->device); diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 64b3d30027b8..b92947d62ad6 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2118,7 +2118,7 @@ static void fbcon_bmove_rec(struct vc_data *vc, struct display *p, int sy, int s height, width); } -static __inline__ void updatescrollmode(struct display *p, +static void updatescrollmode(struct display *p, struct fb_info *info, struct vc_data *vc) { diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index cd5f20da738a..6048b55f2878 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1262,8 +1262,8 @@ fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case FBIOPUT_CON2FBMAP: arg = (unsigned long) compat_ptr(arg); case FBIOBLANK: - ret = fb_ioctl(file, cmd, arg); - break; + mutex_unlock(&info->lock); + return fb_ioctl(file, cmd, arg); case FBIOGET_FSCREENINFO: ret = fb_get_fscreeninfo(inode, file, cmd, arg); diff --git a/drivers/video/via/global.h b/drivers/video/via/global.h index 8e5263c5b812..7543d5f7e309 100644 --- a/drivers/video/via/global.h +++ b/drivers/video/via/global.h @@ -38,7 +38,6 @@ #include "iface.h" #include "viafbdev.h" #include "chip.h" -#include "debug.h" #include "accel.h" #include "share.h" #include "dvi.h" @@ -48,12 +47,10 @@ #include "lcd.h" #include "ioctl.h" -#include "viamode.h" #include "via_utility.h" #include "vt1636.h" #include "tblDPASetting.h" #include "tbl1636.h" -#include "viafbdev.h" /* External struct*/ diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 6e46a551395c..3e57aa4d643a 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -3,8 +3,8 @@ * * Based on wdt.c. Original copyright messages: * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -15,7 +15,7 @@ * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * - * (c) Copyright 1995 Alan Cox <alan@redhat.com> + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index a5110f93a755..a1d7856ea6e0 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -6,8 +6,8 @@ * Based on acquirewdt.c which is based on wdt.c. * Original copyright messages: * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -18,7 +18,7 @@ * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * - * (c) Copyright 1995 Alan Cox <alan@redhat.com> + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 31b42253054e..067a57cb3f82 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -5,7 +5,7 @@ * Originally based on softdog.c * Copyright 2006-2007 Analog Devices Inc. * Copyright 2006-2007 Michele d'Amico - * Copyright 1996 Alan Cox <alan@redhat.com> + * Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk> * * Enter bugs at http://blackfin.uclinux.org/ * diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index bbd14e34319f..a171fc6ae1cb 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -8,8 +8,8 @@ * Based on wdt.c. * Original copyright messages: * - * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index c13383f7fcb9..74f951c18b90 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -394,8 +394,7 @@ static unsigned char __init esb_getdevice(void) goto err_disable; } - BASEADDR = ioremap(pci_resource_start(esb_pci, 0), - pci_resource_len(esb_pci, 0)); + BASEADDR = pci_ioremap_bar(esb_pci, 0); if (BASEADDR == NULL) { /* Something's wrong here, BASEADDR has to be set */ printk(KERN_ERR PFX "failed to get BASEADDR\n"); diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 8782ec1f5aa0..317ef2b16cff 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -11,8 +11,8 @@ * Based on acquirewdt.c which is based on wdt.c. * Original copyright messages: * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -23,7 +23,7 @@ * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * - * (c) Copyright 1995 Alan Cox <alan@redhat.com> + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c index 73c9e7992feb..0f761db9a27c 100644 --- a/drivers/watchdog/indydog.c +++ b/drivers/watchdog/indydog.c @@ -9,7 +9,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * based on softdog.c by Alan Cox <alan@redhat.com> + * based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk> */ #include <linux/module.h> diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 2a9bfa81f9d6..1130ad697ce2 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -4,8 +4,8 @@ * (c) Copyright 2004 ARM Limited * * Based on the SoftDog driver: - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 7bcbb7f4745f..2f2ce7429f5b 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -16,7 +16,7 @@ * 20030527: George G. Davis <gdavis@mvista.com> * Initially based on linux-2.4.19-rmk7-pxa1/drivers/char/sa1100_wdt.c * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> - * Based on SoftDog driver by Alan Cox <alan@redhat.com> + * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk> * * Copyright (c) 2004 Texas Instruments. * 1. Modified to support OMAP1610 32-KHz watchdog timer diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index 90eb1d4271d7..5d76422c402c 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -6,7 +6,7 @@ * Based on source code of the following authors: * Ken Hollis <kenji@bitgate.com>, * Lindsay Harris <lindsay@bluegum.com>, - * Alan Cox <alan@redhat.com>, + * Alan Cox <alan@lxorguk.ukuu.org.uk>, * Matt Domsch <Matt_Domsch@dell.com>, * Rob Radez <rob@osinvestor.com> * diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index c1685c942de6..afb089695da8 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -5,7 +5,7 @@ * * Based on source code of the following authors: * Ken Hollis <kenji@bitgate.com>, - * Alan Cox <alan@redhat.com>, + * Alan Cox <alan@lxorguk.ukuu.org.uk>, * Matt Domsch <Matt_Domsch@dell.com>, * Rob Radez <rob@osinvestor.com>, * Greg Kroah-Hartman <greg@kroah.com> diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index c9c73b69c5e5..57027f4653ce 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -7,7 +7,8 @@ * based on * SoftDog 0.05: A Software Watchdog Device * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 86d42801de45..f7f6ce82a5e2 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -6,7 +6,7 @@ * S3C2410 Watchdog Timer Support * * Based on, softdog.c by Alan Cox, - * (c) Copyright 1996 Alan Cox <alan@redhat.com> + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 31a48437dc3d..ed01e4c2beff 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -2,7 +2,7 @@ * Watchdog driver for the SA11x0/PXA2xx * * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> - * Based on SoftDog driver by Alan Cox <alan@redhat.com> + * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index 27e526a07c9a..38f5831c9291 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -35,8 +35,8 @@ * Based on various other watchdog drivers, which are probably all * loosely based on something Alan Cox wrote years ago. * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c index fd83dd052d8c..ae74f6bcfa23 100644 --- a/drivers/watchdog/sbc8360.c +++ b/drivers/watchdog/sbc8360.c @@ -16,8 +16,8 @@ * Based on acquirewdt.c which is based on wdt.c. * Original copyright messages: * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -28,7 +28,7 @@ * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * - * (c) Copyright 1995 Alan Cox <alan@redhat.com> + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> * * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c index e5e470ca7759..06553debc7bc 100644 --- a/drivers/watchdog/sbc_epx_c3.c +++ b/drivers/watchdog/sbc_epx_c3.c @@ -10,7 +10,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * based on softdog.c by Alan Cox <alan@redhat.com> + * based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk> */ #include <linux/module.h> diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index 988ff1d5b4be..2e56cad77d19 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -1,7 +1,7 @@ /* * SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x * - * Based on acquirewdt.c by Alan Cox <alan@redhat.com> + * Based on acquirewdt.c by Alan Cox <alan@lxorguk.ukuu.org.uk> * and some other existing drivers * * This program is free software; you can redistribute it and/or diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c index c650464c5c63..7204f9662114 100644 --- a/drivers/watchdog/softdog.c +++ b/drivers/watchdog/softdog.c @@ -1,8 +1,7 @@ /* * SoftDog 0.07: A Software Watchdog Device * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 69396adaa5c3..916890abffdd 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -11,8 +11,8 @@ * * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -23,7 +23,7 @@ * warranty for any of this software. This material is provided * "AS-IS" and at no charge. * - * (c) Copyright 1995 Alan Cox <alan@redhat.com> + * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> */ #include <linux/module.h> diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 445d30a01ed3..3c7aa412b1f3 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -12,8 +12,8 @@ * * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index 68377ae171ff..42e940c23891 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -10,8 +10,8 @@ * Based on advantechwdt.c which is based on wdt.c. * Original copyright messages: * - * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index deeebb2b13ea..eddb9187e7b6 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -1,8 +1,8 @@ /* * Industrial Computer Source WDT500/501 driver * - * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c index 191ea6302107..f55135662d78 100644 --- a/drivers/watchdog/wdt285.c +++ b/drivers/watchdog/wdt285.c @@ -6,7 +6,8 @@ * * SoftDog 0.05: A Software Watchdog Device * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. + * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index ed02bdb38c09..c45839a4a34d 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -1,8 +1,8 @@ /* * Industrial Computer Source PCI-WDT500/501 driver * - * (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved. - * http://www.redhat.com + * (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>, + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 9ce1ab6c268d..1e3b934a4cf7 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -774,7 +774,7 @@ void xen_poll_irq(int irq) poll.nr_ports = 1; poll.timeout = 0; - poll.ports = &evtchn; + set_xen_guest_handle(poll.ports, &evtchn); if (HYPERVISOR_sched_op(SCHEDOP_poll, &poll) != 0) BUG(); diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index d0e87cbe157c..9b91617b9582 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -39,8 +39,6 @@ static int xen_suspend(void *data) BUG_ON(!irqs_disabled()); - load_cr3(swapper_pg_dir); - err = device_power_down(PMSG_SUSPEND); if (err) { printk(KERN_ERR "xen_suspend: device_power_down failed: %d\n", diff --git a/drivers/xen/xencomm.c b/drivers/xen/xencomm.c index 797cb4e31f07..a240b2c20b99 100644 --- a/drivers/xen/xencomm.c +++ b/drivers/xen/xencomm.c @@ -23,13 +23,7 @@ #include <asm/page.h> #include <xen/xencomm.h> #include <xen/interface/xen.h> -#ifdef __ia64__ -#include <asm/xen/xencomm.h> /* for is_kern_addr() */ -#endif - -#ifdef HAVE_XEN_PLATFORM_COMPAT_H -#include <xen/platform-compat.h> -#endif +#include <asm/xen/xencomm.h> /* for xencomm_is_phys_contiguous() */ static int xencomm_init(struct xencomm_desc *desc, void *buffer, unsigned long bytes) @@ -157,20 +151,11 @@ static int xencomm_create(void *buffer, unsigned long bytes, return 0; } -/* check if memory address is within VMALLOC region */ -static int is_phys_contiguous(unsigned long addr) -{ - if (!is_kernel_addr(addr)) - return 0; - - return (addr < VMALLOC_START) || (addr >= VMALLOC_END); -} - static struct xencomm_handle *xencomm_create_inline(void *ptr) { unsigned long paddr; - BUG_ON(!is_phys_contiguous((unsigned long)ptr)); + BUG_ON(!xencomm_is_phys_contiguous((unsigned long)ptr)); paddr = (unsigned long)xencomm_pa(ptr); BUG_ON(paddr & XENCOMM_INLINE_FLAG); @@ -202,7 +187,7 @@ struct xencomm_handle *xencomm_map(void *ptr, unsigned long bytes) int rc; struct xencomm_desc *desc; - if (is_phys_contiguous((unsigned long)ptr)) + if (xencomm_is_phys_contiguous((unsigned long)ptr)) return xencomm_create_inline(ptr); rc = xencomm_create(ptr, bytes, &desc, GFP_KERNEL); @@ -219,7 +204,7 @@ struct xencomm_handle *__xencomm_map_no_alloc(void *ptr, unsigned long bytes, int rc; struct xencomm_desc *desc = NULL; - if (is_phys_contiguous((unsigned long)ptr)) + if (xencomm_is_phys_contiguous((unsigned long)ptr)) return xencomm_create_inline(ptr); rc = xencomm_create_mini(ptr, bytes, xc_desc, |