diff options
Diffstat (limited to 'drivers')
61 files changed, 522 insertions, 541 deletions
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 5f51057518b0..807b0df308f1 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -274,8 +274,6 @@ static void acpi_processor_idle(void) } } - cx->usage++; - #ifdef CONFIG_HOTPLUG_CPU /* * Check for P_LVL2_UP flag before entering C2 and above on @@ -283,9 +281,12 @@ static void acpi_processor_idle(void) * detection phase, to work cleanly with logical CPU hotplug. */ if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) && - !pr->flags.has_cst && acpi_fadt.plvl2_up) - cx->type = ACPI_STATE_C1; + !pr->flags.has_cst && !acpi_fadt.plvl2_up) + cx = &pr->power.states[ACPI_STATE_C1]; #endif + + cx->usage++; + /* * Sleep: * ------ @@ -386,6 +387,15 @@ static void acpi_processor_idle(void) next_state = pr->power.state; +#ifdef CONFIG_HOTPLUG_CPU + /* Don't do promotion/demotion */ + if ((cx->type == ACPI_STATE_C1) && (num_online_cpus() > 1) && + !pr->flags.has_cst && !acpi_fadt.plvl2_up) { + next_state = cx; + goto end; + } +#endif + /* * Promotion? * ---------- @@ -557,7 +567,7 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) * Check for P_LVL2_UP flag before entering C2 and above on * an SMP system. */ - if ((num_online_cpus() > 1) && acpi_fadt.plvl2_up) + if ((num_online_cpus() > 1) && !acpi_fadt.plvl2_up) return_VALUE(-ENODEV); #endif diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index f37584015324..dc9817cfb882 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -102,8 +102,8 @@ static int cpu_has_cpufreq(unsigned int cpu) { struct cpufreq_policy policy; if (!acpi_thermal_cpufreq_is_init || cpufreq_get_policy(&policy, cpu)) - return -ENODEV; - return 0; + return 0; + return 1; } static int acpi_thermal_cpufreq_increase(unsigned int cpu) diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c index 0c5abc536c7a..2ce872d75890 100644 --- a/drivers/acpi/utilities/utmisc.c +++ b/drivers/acpi/utilities/utmisc.c @@ -84,14 +84,14 @@ acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id) /* Find a free owner ID */ - for (i = 0; i < 32; i++) { - if (!(acpi_gbl_owner_id_mask & (1 << i))) { + for (i = 0; i < 64; i++) { + if (!(acpi_gbl_owner_id_mask & (1ULL << i))) { ACPI_DEBUG_PRINT((ACPI_DB_VALUES, - "Current owner_id mask: %8.8X New ID: %2.2X\n", + "Current owner_id mask: %16.16LX New ID: %2.2X\n", acpi_gbl_owner_id_mask, (unsigned int)(i + 1))); - acpi_gbl_owner_id_mask |= (1 << i); + acpi_gbl_owner_id_mask |= (1ULL << i); *owner_id = (acpi_owner_id) (i + 1); goto exit; } @@ -106,7 +106,7 @@ acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id) */ *owner_id = 0; status = AE_OWNER_ID_LIMIT; - ACPI_REPORT_ERROR(("Could not allocate new owner_id (32 max), AE_OWNER_ID_LIMIT\n")); + ACPI_REPORT_ERROR(("Could not allocate new owner_id (64 max), AE_OWNER_ID_LIMIT\n")); exit: (void)acpi_ut_release_mutex(ACPI_MTX_CACHES); @@ -123,7 +123,7 @@ acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id) * control method or unloading a table. Either way, we would * ignore any error anyway. * - * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 32 + * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 64 * ******************************************************************************/ @@ -140,7 +140,7 @@ void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr) /* Zero is not a valid owner_iD */ - if ((owner_id == 0) || (owner_id > 32)) { + if ((owner_id == 0) || (owner_id > 64)) { ACPI_REPORT_ERROR(("Invalid owner_id: %2.2X\n", owner_id)); return_VOID; } @@ -158,8 +158,8 @@ void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr) /* Free the owner ID only if it is valid */ - if (acpi_gbl_owner_id_mask & (1 << owner_id)) { - acpi_gbl_owner_id_mask ^= (1 << owner_id); + if (acpi_gbl_owner_id_mask & (1ULL << owner_id)) { + acpi_gbl_owner_id_mask ^= (1ULL << owner_id); } (void)acpi_ut_release_mutex(ACPI_MTX_CACHES); diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index b46a72d782d6..84e68cdd451b 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -687,7 +687,7 @@ config NVRAM config RTC tristate "Enhanced Real Time Clock Support" - depends on !PPC32 && !PARISC && !IA64 && !M68K + depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI) ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you @@ -735,7 +735,7 @@ config SGI_IP27_RTC config GEN_RTC tristate "Generic /dev/rtc emulation" - depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC32 && !SPARC64 + depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 501e557cbc86..342302d46743 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1312,8 +1312,6 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on) static int radeon_do_init_cp(drm_device_t * dev, drm_radeon_init_t * init) { drm_radeon_private_t *dev_priv = dev->dev_private; - unsigned int mem_size; - DRM_DEBUG("\n"); dev_priv->is_pci = init->is_pci; @@ -1523,11 +1521,8 @@ static int radeon_do_init_cp(drm_device_t * dev, drm_radeon_init_t * init) + dev_priv->fb_location) >> 10)); dev_priv->gart_size = init->gart_size; - - mem_size = RADEON_READ(RADEON_CONFIG_MEMSIZE); - if (mem_size == 0) - mem_size = 0x800000; - dev_priv->gart_vm_start = dev_priv->fb_location + mem_size; + dev_priv->gart_vm_start = dev_priv->fb_location + + RADEON_READ(RADEON_CONFIG_APER_SIZE); #if __OS_HAS_AGP if (!dev_priv->is_pci) diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 449d029ad4f4..8b603b2d1c42 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -930,8 +930,8 @@ static void kbd_refresh_leds(struct input_handle *handle) } #if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_ALPHA) ||\ - defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC32) ||\ - defined(CONFIG_SPARC64) || defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\ + defined(CONFIG_MIPS) || defined(CONFIG_PPC) || defined(CONFIG_SPARC) ||\ + defined(CONFIG_PARISC) || defined(CONFIG_SUPERH) ||\ (defined(CONFIG_ARM) && defined(CONFIG_KEYBOARD_ATKBD) && !defined(CONFIG_ARCH_RPC)) #define HW_RAW(dev) (test_bit(EV_MSC, dev->evbit) && test_bit(MSC_RAW, dev->mscbit) &&\ @@ -958,7 +958,7 @@ static unsigned short x86_keycodes[256] = extern int mac_hid_mouse_emulate_buttons(int, int, int); #endif /* CONFIG_MAC_EMUMOUSEBTN */ -#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64) +#ifdef CONFIG_SPARC static int sparc_l1_a_state = 0; extern void sun_do_break(void); #endif @@ -1045,7 +1045,7 @@ static void kbd_keycode(unsigned int keycode, int down, if (keycode == KEY_LEFTALT || keycode == KEY_RIGHTALT) sysrq_alt = down; -#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64) +#ifdef CONFIG_SPARC if (keycode == KEY_STOP) sparc_l1_a_state = down; #endif @@ -1072,7 +1072,7 @@ static void kbd_keycode(unsigned int keycode, int down, return; } #endif -#if defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64) +#ifdef CONFIG_SPARC if (keycode == KEY_A && sparc_l1_a_state) { sparc_l1_a_state = 0; sun_do_break(); diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index f66c7ad6fd38..3c1dafaa3441 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -419,7 +419,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) while (this_round > 1) { unsigned short w; - w = get_unaligned(((const unsigned short *)con_buf0)); + w = get_unaligned(((unsigned short *)con_buf0)); vcs_scr_writew(vc, w, org++); con_buf0 += 2; this_round -= 2; diff --git a/drivers/fc4/Kconfig b/drivers/fc4/Kconfig index f00c02a13ed6..345dbe6f10df 100644 --- a/drivers/fc4/Kconfig +++ b/drivers/fc4/Kconfig @@ -26,7 +26,7 @@ comment "FC4 drivers" config FC4_SOC tristate "Sun SOC/Sbus" - depends on FC4!=n && (SPARC32 || SPARC64) + depends on FC4!=n && SPARC help Serial Optical Channel is an interface card with one or two Fibre Optic ports, each of which can be connected to a disk array. Note @@ -38,7 +38,7 @@ config FC4_SOC config FC4_SOCAL tristate "Sun SOC+ (aka SOCAL)" - depends on FC4!=n && (SPARC32 || SPARC64) + depends on FC4!=n && SPARC ---help--- Serial Optical Channel Plus is an interface card with up to two Fibre Optic ports. This card supports FC Arbitrated Loop (usually @@ -62,7 +62,7 @@ config SCSI_PLUTO be called pluto. config SCSI_FCAL - tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC32 || SPARC64 + tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC depends on FC4!=n && SCSI help This driver drives FC-AL disks connected through a Fibre Channel @@ -75,7 +75,7 @@ config SCSI_FCAL config SCSI_FCAL prompt "Generic FC-AL disk driver" - depends on FC4!=n && SCSI && !SPARC32 && !SPARC64 + depends on FC4!=n && SCSI && !SPARC endmenu diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c index 99a642d2a1fe..1849b176cf18 100644 --- a/drivers/input/joystick/warrior.c +++ b/drivers/input/joystick/warrior.c @@ -172,7 +172,7 @@ static int warrior_connect(struct serio *serio, struct serio_driver *drv) input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 8); input_set_abs_params(input_dev, ABS_THROTTLE, -112, 112, 0, 0); input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0); - input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0); + input_set_abs_params(input_dev, ABS_HAT0Y, -1, 1, 0, 0); serio_set_drvdata(serio, warrior); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 07813fc0523f..e08dbe08f46d 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -26,7 +26,7 @@ config INPUT_PCSPKR config INPUT_SPARCSPKR tristate "SPARC Speaker support" - depends on PCI && (SPARC32 || SPARC64) + depends on PCI && SPARC help Say Y here if you want the standard Speaker on Sparc PCI systems to be used for bells and whistles. diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c index 4bf584364d28..2f9a04ae725f 100644 --- a/drivers/input/mouse/sermouse.c +++ b/drivers/input/mouse/sermouse.c @@ -95,7 +95,7 @@ static void sermouse_process_msc(struct sermouse *sermouse, signed char data, st input_sync(dev); - if (++sermouse->count == (5 - ((sermouse->type == SERIO_SUN) << 1))) + if (++sermouse->count == 5) sermouse->count = 0; } diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h index 13835039a2a7..cbbf3842da5b 100644 --- a/drivers/input/serio/i8042.h +++ b/drivers/input/serio/i8042.h @@ -21,7 +21,7 @@ #include "i8042-ip22io.h" #elif defined(CONFIG_PPC) #include "i8042-ppcio.h" -#elif defined(CONFIG_SPARC32) || defined(CONFIG_SPARC64) +#elif defined(CONFIG_SPARC) #include "i8042-sparcio.h" #elif defined(CONFIG_X86) || defined(CONFIG_IA64) #include "i8042-x86ia64io.h" diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index 3fc8cdd94c3d..190878eef990 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -923,7 +923,7 @@ static void do_monitor_cpu_combined(void) if (temp_combi >= ((state0->mpu.tmax + 8) << 16)) { printk(KERN_WARNING "Warning ! Temperature way above maximum (%d) !\n", temp_combi >> 16); - state0->overtemp = CPU_MAX_OVERTEMP; + state0->overtemp += CPU_MAX_OVERTEMP / 4; } else if (temp_combi > (state0->mpu.tmax << 16)) state0->overtemp++; else @@ -933,7 +933,7 @@ static void do_monitor_cpu_combined(void) if (state0->overtemp > 0) { state0->rpm = state0->mpu.rmaxn_exhaust_fan; state0->intake_rpm = intake = state0->mpu.rmaxn_intake_fan; - pump = state0->pump_min; + pump = state0->pump_max; goto do_set_fans; } @@ -998,7 +998,7 @@ static void do_monitor_cpu_split(struct cpu_pid_state *state) printk(KERN_WARNING "Warning ! CPU %d temperature way above maximum" " (%d) !\n", state->index, temp >> 16); - state->overtemp = CPU_MAX_OVERTEMP; + state->overtemp += CPU_MAX_OVERTEMP / 4; } else if (temp > (state->mpu.tmax << 16)) state->overtemp++; else @@ -1060,7 +1060,7 @@ static void do_monitor_cpu_rack(struct cpu_pid_state *state) printk(KERN_WARNING "Warning ! CPU %d temperature way above maximum" " (%d) !\n", state->index, temp >> 16); - state->overtemp = CPU_MAX_OVERTEMP; + state->overtemp = CPU_MAX_OVERTEMP / 4; } else if (temp > (state->mpu.tmax << 16)) state->overtemp++; else diff --git a/drivers/md/md.c b/drivers/md/md.c index cd12fca73b0d..8175a2a222da 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1729,7 +1729,7 @@ level_show(mddev_t *mddev, char *page) if (p == NULL && mddev->raid_disks == 0) return 0; if (mddev->level >= 0) - return sprintf(page, "RAID-%d\n", mddev->level); + return sprintf(page, "raid%d\n", mddev->level); else return sprintf(page, "%s\n", p->name); } diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 992be0be6b1e..7dae91e5863c 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -176,6 +176,9 @@ static void init_av7110_av(struct av7110 *av7110) } } + if (dev->pci->subsystem_vendor == 0x13c2 && dev->pci->subsystem_device == 0x000e) + av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, SpdifSwitch, 1, 0); // SPDIF on + ret = av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right); if (ret < 0) printk("dvb-ttpci:cannot set volume :%d\n",ret); diff --git a/drivers/media/dvb/ttpci/av7110_hw.h b/drivers/media/dvb/ttpci/av7110_hw.h index fedd20f9815d..2a5e87ba1052 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.h +++ b/drivers/media/dvb/ttpci/av7110_hw.h @@ -143,7 +143,8 @@ enum av7110_audio_command { MainSwitch, ADSwitch, SendDiSEqC, - SetRegister + SetRegister, + SpdifSwitch }; enum av7110_request_command { diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index aea3f038cff6..5b93723a1768 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -333,24 +333,30 @@ static int set_input(struct i2c_client *client, enum cx25840_input input) static int set_v4lstd(struct i2c_client *client, v4l2_std_id std) { - u8 fmt; - - switch (std) { - /* zero is autodetect */ - case 0: fmt = 0x0; break; - /* default ntsc to ntsc-m */ - case V4L2_STD_NTSC: - case V4L2_STD_NTSC_M: fmt = 0x1; break; - case V4L2_STD_NTSC_M_JP: fmt = 0x2; break; - case V4L2_STD_NTSC_443: fmt = 0x3; break; - case V4L2_STD_PAL: fmt = 0x4; break; - case V4L2_STD_PAL_M: fmt = 0x5; break; - case V4L2_STD_PAL_N: fmt = 0x6; break; - case V4L2_STD_PAL_Nc: fmt = 0x7; break; - case V4L2_STD_PAL_60: fmt = 0x8; break; - case V4L2_STD_SECAM: fmt = 0xc; break; - default: - return -ERANGE; + u8 fmt=0; /* zero is autodetect */ + + /* First tests should be against specific std */ + if (std & V4L2_STD_NTSC_M_JP) { + fmt=0x2; + } else if (std & V4L2_STD_NTSC_443) { + fmt=0x3; + } else if (std & V4L2_STD_PAL_M) { + fmt=0x5; + } else if (std & V4L2_STD_PAL_N) { + fmt=0x6; + } else if (std & V4L2_STD_PAL_Nc) { + fmt=0x7; + } else if (std & V4L2_STD_PAL_60) { + fmt=0x8; + } else { + /* Then, test against generic ones */ + if (std & V4L2_STD_NTSC) { + fmt=0x1; + } else if (std & V4L2_STD_PAL) { + fmt=0x4; + } else if (std & V4L2_STD_SECAM) { + fmt=0xc; + } } cx25840_and_or(client, 0x400, ~0xf, fmt); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index ec11619f8ea9..0cfe75416ec6 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -39,7 +39,7 @@ MODULE_PARM_DESC(core_debug,"enable debug messages [core]"); #define em28xx_coredbg(fmt, arg...) do {\ if (core_debug) \ printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __FUNCTION__, ##arg); } while (0) + dev->name, __FUNCTION__ , ##arg); } while (0) static unsigned int reg_debug; module_param(reg_debug,int,0644); @@ -48,7 +48,7 @@ MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]"); #define em28xx_regdbg(fmt, arg...) do {\ if (reg_debug) \ printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __FUNCTION__, ##arg); } while (0) + dev->name, __FUNCTION__ , ##arg); } while (0) static unsigned int isoc_debug; module_param(isoc_debug,int,0644); @@ -57,7 +57,7 @@ MODULE_PARM_DESC(isoc_debug,"enable debug messages [isoc transfers]"); #define em28xx_isocdbg(fmt, arg...) do {\ if (isoc_debug) \ printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __FUNCTION__, ##arg); } while (0) + dev->name, __FUNCTION__ , ##arg); } while (0) static int alt = EM28XX_PINOUT; module_param(alt, int, 0644); diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 29e21ad187cc..7f5603054f02 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -44,7 +44,7 @@ MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); printk(fmt, ##args); } while (0) #define dprintk2(lvl,fmt, args...) if (i2c_debug>=lvl) do{ \ printk(KERN_DEBUG "%s at %s: " fmt, \ - dev->name, __FUNCTION__, ##args); } while (0) + dev->name, __FUNCTION__ , ##args); } while (0) /* * em2800_i2c_send_max4() diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 8ecaa0803e08..06d76879bde2 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -45,7 +45,7 @@ #define em28xx_videodbg(fmt, arg...) do {\ if (video_debug) \ printk(KERN_INFO "%s %s :"fmt, \ - dev->name, __FUNCTION__, ##arg); } while (0) + dev->name, __FUNCTION__ , ##arg); } while (0) MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 1e2ee43db394..5c7a41ce69f3 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -392,18 +392,18 @@ extern const unsigned int em28xx_bcount; /* printk macros */ #define em28xx_err(fmt, arg...) do {\ - printk(KERN_ERR fmt, ##arg); } while (0) + printk(KERN_ERR fmt , ##arg); } while (0) #define em28xx_errdev(fmt, arg...) do {\ printk(KERN_ERR "%s: "fmt,\ - dev->name, ##arg); } while (0) + dev->name , ##arg); } while (0) #define em28xx_info(fmt, arg...) do {\ printk(KERN_INFO "%s: "fmt,\ - dev->name, ##arg); } while (0) + dev->name , ##arg); } while (0) #define em28xx_warn(fmt, arg...) do {\ printk(KERN_WARNING "%s: "fmt,\ - dev->name, ##arg); } while (0) + dev->name , ##arg); } while (0) inline static int em28xx_audio_source(struct em28xx *dev, int input) { diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index 3428e1ed0032..c36f014f1fdf 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -389,7 +389,7 @@ static int saa7127_set_vps(struct i2c_client *client, struct v4l2_sliced_vbi_dat static int saa7127_set_cc(struct i2c_client *client, struct v4l2_sliced_vbi_data *data) { struct saa7127_state *state = i2c_get_clientdata(client); - u16 cc = data->data[0] << 8 | data->data[1]; + u16 cc = data->data[1] << 8 | data->data[0]; int enable = (data->line != 0); if (enable && (data->field != 0 || data->line != 21)) @@ -397,7 +397,7 @@ static int saa7127_set_cc(struct i2c_client *client, struct v4l2_sliced_vbi_data if (state->cc_enable != enable) { saa7127_dbg("Turn CC %s\n", enable ? "on" : "off"); saa7127_write(client, SAA7127_REG_CLOSED_CAPTION, - (enable << 6) | 0x11); + (state->xds_enable << 7) | (enable << 6) | 0x11); state->cc_enable = enable; } if (!enable) @@ -423,7 +423,7 @@ static int saa7127_set_xds(struct i2c_client *client, struct v4l2_sliced_vbi_dat if (state->xds_enable != enable) { saa7127_dbg("Turn XDS %s\n", enable ? "on" : "off"); saa7127_write(client, SAA7127_REG_CLOSED_CAPTION, - (enable << 7) | 0x11); + (enable << 7) | (state->cc_enable << 6) | 0x11); state->xds_enable = enable; } if (!enable) diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig index c512c4411b38..8a5c3e71b37d 100644 --- a/drivers/media/video/saa7134/Kconfig +++ b/drivers/media/video/saa7134/Kconfig @@ -1,11 +1,10 @@ config VIDEO_SAA7134 tristate "Philips SAA7134 support" - depends on VIDEO_DEV && PCI && I2C && SOUND && SND + depends on VIDEO_DEV && PCI && I2C select VIDEO_BUF select VIDEO_IR select VIDEO_TUNER select CRC32 - select SND_PCM_OSS ---help--- This is a video4linux driver for Philips SAA713x based TV cards. @@ -13,6 +12,29 @@ config VIDEO_SAA7134 To compile this driver as a module, choose M here: the module will be called saa7134. +config VIDEO_SAA7134_ALSA + tristate "Philips SAA7134 DMA audio support" + depends on VIDEO_SAA7134 && SND + select SND_PCM_OSS + ---help--- + This is a video4linux driver for direct (DMA) audio in + Philips SAA713x based TV cards using ALSA + + To compile this driver as a module, choose M here: the + module will be called saa7134-alsa. + +config VIDEO_SAA7134_OSS + tristate "Philips SAA7134 DMA audio support (OSS, DEPRECATED)" + depends on VIDEO_SAA7134 && SOUND_PRIME && !VIDEO_SAA7134_ALSA + ---help--- + This is a video4linux driver for direct (DMA) audio in + Philips SAA713x based TV cards using OSS + + This is deprecated in favor of the ALSA module + + To compile this driver as a module, choose M here: the + module will be called saa7134-oss. + config VIDEO_SAA7134_DVB tristate "DVB/ATSC Support for saa7134 based TV cards" depends on VIDEO_SAA7134 && DVB_CORE diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/video/saa7134/Makefile index 134f83a96218..1ba998424bbd 100644 --- a/drivers/media/video/saa7134/Makefile +++ b/drivers/media/video/saa7134/Makefile @@ -4,8 +4,11 @@ saa7134-objs := saa7134-cards.o saa7134-core.o saa7134-i2c.o \ saa7134-video.o saa7134-input.o obj-$(CONFIG_VIDEO_SAA7134) += saa7134.o saa7134-empress.o \ - saa6752hs.o saa7134-alsa.o \ - saa7134-oss.o + saa6752hs.o + +obj-$(CONFIG_VIDEO_SAA7134_ALSA) += saa7134-alsa.o +obj-$(CONFIG_VIDEO_SAA7134_OSS) += saa7134-oss.o + obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o EXTRA_CFLAGS += -I$(src)/.. diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index b24a26b065c2..ade05f75fdb0 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -60,7 +60,7 @@ module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s)."); #define dprintk(fmt, arg...) if (debug) \ - printk(KERN_DEBUG "%s/alsa: " fmt, dev->name, ## arg) + printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ##arg) @@ -989,6 +989,14 @@ static int saa7134_alsa_init(void) struct saa7134_dev *dev = NULL; struct list_head *list; + if (!dmasound_init && !dmasound_exit) { + dmasound_init = alsa_device_init; + dmasound_exit = alsa_device_exit; + } else { + printk(KERN_WARNING "saa7134 ALSA: can't load, DMA sound handler already assigned (probably to OSS)\n"); + return -EBUSY; + } + printk(KERN_INFO "saa7134 ALSA driver for DMA sound loaded\n"); list_for_each(list,&saa7134_devlist) { @@ -1001,9 +1009,6 @@ static int saa7134_alsa_init(void) } } - dmasound_init = alsa_device_init; - dmasound_exit = alsa_device_exit; - if (dev == NULL) printk(KERN_INFO "saa7134 ALSA: no saa7134 cards found\n"); @@ -1023,12 +1028,15 @@ static void saa7134_alsa_exit(void) snd_card_free(snd_saa7134_cards[idx]); } + dmasound_init = NULL; + dmasound_exit = NULL; printk(KERN_INFO "saa7134 ALSA driver for DMA sound unloaded\n"); return; } -module_init(saa7134_alsa_init); +/* We initialize this late, to make sure the sound system is up and running */ +late_initcall(saa7134_alsa_init); module_exit(saa7134_alsa_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ricardo Cerqueira"); diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c index 513a699a6df2..8badd2a9cb2f 100644 --- a/drivers/media/video/saa7134/saa7134-oss.c +++ b/drivers/media/video/saa7134/saa7134-oss.c @@ -959,8 +959,17 @@ static int saa7134_oss_init(void) struct saa7134_dev *dev = NULL; struct list_head *list; + if (!dmasound_init && !dmasound_exit) { + dmasound_init = oss_device_init; + dmasound_exit = oss_device_exit; + } else { + printk(KERN_WARNING "saa7134 OSS: can't load, DMA sound handler already assigned (probably to ALSA)\n"); + return -EBUSY; + } + printk(KERN_INFO "saa7134 OSS driver for DMA sound loaded\n"); + list_for_each(list,&saa7134_devlist) { dev = list_entry(list, struct saa7134_dev, devlist); if (dev->dmasound.priv_data == NULL) { @@ -974,9 +983,6 @@ static int saa7134_oss_init(void) if (dev == NULL) printk(KERN_INFO "saa7134 OSS: no saa7134 cards found\n"); - dmasound_init = oss_device_init; - dmasound_exit = oss_device_exit; - return 0; } @@ -997,12 +1003,16 @@ static void saa7134_oss_exit(void) } + dmasound_init = NULL; + dmasound_exit = NULL; + printk(KERN_INFO "saa7134 OSS driver for DMA sound unloaded\n"); return; } -module_init(saa7134_oss_init); +/* We initialize this late, to make sure the sound system is up and running */ +late_initcall(saa7134_oss_init); module_exit(saa7134_oss_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index cd7cf1bd12b4..5ac235365dd8 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -206,7 +206,7 @@ hauppauge_tuner[] = { TUNER_ABSENT, "TCL 2002MI_3H"}, { TUNER_TCL_2002N, "TCL 2002N 5H"}, /* 100-109 */ - { TUNER_ABSENT, "Philips FMD1216ME"}, + { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216ME"}, { TUNER_TEA5767, "Philips TEA5768HL FM Radio"}, { TUNER_ABSENT, "Panasonic ENV57H12D5"}, { TUNER_PHILIPS_FM1236_MK3, "TCL MFNM05-4"}, diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index d91fcf7c3178..abcf19116d70 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -359,7 +359,12 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) md->block_bits = card->csd.read_blkbits; blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits); - set_capacity(md->disk, card->csd.capacity); + + /* + * The CSD capacity field is in units of read_blkbits. + * set_capacity takes units of 512 bytes. + */ + set_capacity(md->disk, card->csd.capacity << (card->csd.read_blkbits - 9)); } out: return md; @@ -373,7 +378,7 @@ mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) mmc_card_claim_host(card); cmd.opcode = MMC_SET_BLOCKLEN; - cmd.arg = 1 << card->csd.read_blkbits; + cmd.arg = 1 << md->block_bits; cmd.flags = MMC_RSP_R1; err = mmc_wait_for_cmd(card->host, &cmd, 5); mmc_card_release_host(card); @@ -412,10 +417,9 @@ static int mmc_blk_probe(struct mmc_card *card) if (err) goto out; - printk(KERN_INFO "%s: %s %s %dKiB %s\n", + printk(KERN_INFO "%s: %s %s %luKiB %s\n", md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), - (card->csd.capacity << card->csd.read_blkbits) / 1024, - mmc_blk_readonly(card)?"(ro)":""); + get_capacity(md->disk) >> 1, mmc_blk_readonly(card)?"(ro)":""); mmc_set_drvdata(card, md); add_disk(md->disk); diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 452ccd5037c3..b9b77cf39a18 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -62,7 +62,7 @@ config MTD_PHYSMAP_BANKWIDTH config MTD_SUN_UFLASH tristate "Sun Microsystems userflash support" - depends on (SPARC32 || SPARC64) && MTD_CFI + depends on SPARC && MTD_CFI help This provides a 'mapping' driver which supports the way in which user-programmable flash chips are connected on various diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 525624fc03b4..c39344adecce 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -10,7 +10,7 @@ * trademarks of NVIDIA Corporation in the United States and other * countries. * - * Copyright (C) 2003,4 Manfred Spraul + * Copyright (C) 2003,4,5 Manfred Spraul * Copyright (C) 2004 Andrew de Quincey (wol support) * Copyright (C) 2004 Carl-Daniel Hailfinger (invalid MAC handling, insane * IRQ rate fixes, bigendian fixes, cleanups, verification) @@ -100,6 +100,7 @@ * 0.45: 18 Sep 2005: Remove nv_stop/start_rx from every link check * 0.46: 20 Oct 2005: Add irq optimization modes. * 0.47: 26 Oct 2005: Add phyaddr 0 in phy scan. + * 0.48: 24 Dec 2005: Disable TSO, bugfix for pci_map_single * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -111,7 +112,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.47" +#define FORCEDETH_VERSION "0.48" #define DRV_NAME "forcedeth" #include <linux/module.h> @@ -871,8 +872,8 @@ static int nv_alloc_rx(struct net_device *dev) } else { skb = np->rx_skbuff[nr]; } - np->rx_dma[nr] = pci_map_single(np->pci_dev, skb->data, skb->len, - PCI_DMA_FROMDEVICE); + np->rx_dma[nr] = pci_map_single(np->pci_dev, skb->data, + skb->end-skb->data, PCI_DMA_FROMDEVICE); if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) { np->rx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]); wmb(); @@ -999,7 +1000,7 @@ static void nv_drain_rx(struct net_device *dev) wmb(); if (np->rx_skbuff[i]) { pci_unmap_single(np->pci_dev, np->rx_dma[i], - np->rx_skbuff[i]->len, + np->rx_skbuff[i]->end-np->rx_skbuff[i]->data, PCI_DMA_FROMDEVICE); dev_kfree_skb(np->rx_skbuff[i]); np->rx_skbuff[i] = NULL; @@ -1334,7 +1335,7 @@ static void nv_rx_process(struct net_device *dev) * the performance. */ pci_unmap_single(np->pci_dev, np->rx_dma[i], - np->rx_skbuff[i]->len, + np->rx_skbuff[i]->end-np->rx_skbuff[i]->data, PCI_DMA_FROMDEVICE); { @@ -2455,7 +2456,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK; dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG; #ifdef NETIF_F_TSO - dev->features |= NETIF_F_TSO; + /* disabled dev->features |= NETIF_F_TSO; */ #endif } diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 16bebe7a7ce1..7da0e3dd5fe3 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -38,6 +38,10 @@ #include <asm/irq.h> #include <asm/uaccess.h> +MODULE_DESCRIPTION("PHY library"); +MODULE_AUTHOR("Andy Fleming"); +MODULE_LICENSE("GPL"); + static struct phy_driver genphy_driver; extern int mdio_bus_init(void); extern void mdio_bus_exit(void); diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 50430f79f8cf..1c6d328165bb 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -524,9 +524,6 @@ static int get_filter(void __user *arg, struct sock_filter **p) if (copy_from_user(&uprog, arg, sizeof(uprog))) return -EFAULT; - if (uprog.len > BPF_MAXINSNS) - return -EINVAL; - if (!uprog.len) { *p = NULL; return 0; diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 081717d01374..28ce47a02408 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -2907,7 +2907,7 @@ static int __devinit gem_get_device_address(struct gem *gp) return 0; } -static void __devexit gem_remove_one(struct pci_dev *pdev) +static void gem_remove_one(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); @@ -3181,7 +3181,7 @@ static struct pci_driver gem_driver = { .name = GEM_MODULE_NAME, .id_table = gem_pci_tbl, .probe = gem_init_one, - .remove = __devexit_p(gem_remove_one), + .remove = gem_remove_one, #ifdef CONFIG_PM .suspend = gem_suspend, .resume = gem_resume, diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index a23ed28a72b8..2fc9893d69e1 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.45" -#define DRV_MODULE_RELDATE "Dec 13, 2005" +#define DRV_MODULE_VERSION "3.47" +#define DRV_MODULE_RELDATE "Dec 28, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -341,6 +341,16 @@ static struct { { "interrupt test (offline)" }, }; +static void tg3_write32(struct tg3 *tp, u32 off, u32 val) +{ + writel(val, tp->regs + off); +} + +static u32 tg3_read32(struct tg3 *tp, u32 off) +{ + return (readl(tp->regs + off)); +} + static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val) { unsigned long flags; @@ -411,13 +421,29 @@ static u32 tg3_read_indirect_mbox(struct tg3 *tp, u32 off) return val; } -static void _tw32_flush(struct tg3 *tp, u32 off, u32 val) +/* usec_wait specifies the wait time in usec when writing to certain registers + * where it is unsafe to read back the register without some delay. + * GRC_LOCAL_CTRL is one example if the GPIOs are toggled to switch power. + * TG3PCI_CLOCK_CTRL is another example if the clock frequencies are changed. + */ +static void _tw32_flush(struct tg3 *tp, u32 off, u32 val, u32 usec_wait) { - tp->write32(tp, off, val); - if (!(tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) && - !(tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG) && - !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)) - tp->read32(tp, off); /* flush */ + if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) || + (tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)) + /* Non-posted methods */ + tp->write32(tp, off, val); + else { + /* Posted method */ + tg3_write32(tp, off, val); + if (usec_wait) + udelay(usec_wait); + tp->read32(tp, off); + } + /* Wait again after the read for the posted method to guarantee that + * the wait time is met. + */ + if (usec_wait) + udelay(usec_wait); } static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val) @@ -438,16 +464,6 @@ static void tg3_write32_tx_mbox(struct tg3 *tp, u32 off, u32 val) readl(mbox); } -static void tg3_write32(struct tg3 *tp, u32 off, u32 val) -{ - writel(val, tp->regs + off); -} - -static u32 tg3_read32(struct tg3 *tp, u32 off) -{ - return (readl(tp->regs + off)); -} - #define tw32_mailbox(reg, val) tp->write32_mbox(tp, reg, val) #define tw32_mailbox_f(reg, val) tw32_mailbox_flush(tp, (reg), (val)) #define tw32_rx_mbox(reg, val) tp->write32_rx_mbox(tp, reg, val) @@ -455,7 +471,8 @@ static u32 tg3_read32(struct tg3 *tp, u32 off) #define tr32_mailbox(reg) tp->read32_mbox(tp, reg) #define tw32(reg,val) tp->write32(tp, reg, val) -#define tw32_f(reg,val) _tw32_flush(tp,(reg),(val)) +#define tw32_f(reg,val) _tw32_flush(tp,(reg),(val), 0) +#define tw32_wait_f(reg,val,us) _tw32_flush(tp,(reg),(val), (us)) #define tr32(reg) tp->read32(tp, reg) static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val) @@ -595,21 +612,19 @@ static void tg3_switch_clocks(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) { if (orig_clock_ctrl & CLOCK_CTRL_625_CORE) { - tw32_f(TG3PCI_CLOCK_CTRL, - clock_ctrl | CLOCK_CTRL_625_CORE); - udelay(40); + tw32_wait_f(TG3PCI_CLOCK_CTRL, + clock_ctrl | CLOCK_CTRL_625_CORE, 40); } } else if ((orig_clock_ctrl & CLOCK_CTRL_44MHZ_CORE) != 0) { - tw32_f(TG3PCI_CLOCK_CTRL, - clock_ctrl | - (CLOCK_CTRL_44MHZ_CORE | CLOCK_CTRL_ALTCLK)); - udelay(40); - tw32_f(TG3PCI_CLOCK_CTRL, - clock_ctrl | (CLOCK_CTRL_ALTCLK)); - udelay(40); + tw32_wait_f(TG3PCI_CLOCK_CTRL, + clock_ctrl | + (CLOCK_CTRL_44MHZ_CORE | CLOCK_CTRL_ALTCLK), + 40); + tw32_wait_f(TG3PCI_CLOCK_CTRL, + clock_ctrl | (CLOCK_CTRL_ALTCLK), + 40); } - tw32_f(TG3PCI_CLOCK_CTRL, clock_ctrl); - udelay(40); + tw32_wait_f(TG3PCI_CLOCK_CTRL, clock_ctrl, 40); } #define PHY_BUSY_LOOPS 5000 @@ -1017,39 +1032,50 @@ static void tg3_frob_aux_power(struct tg3 *tp) if ((tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) != 0) return; - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) { - tp_peer = pci_get_drvdata(tp->pdev_peer); - if (!tp_peer) + if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) || + (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714)) { + struct net_device *dev_peer; + + dev_peer = pci_get_drvdata(tp->pdev_peer); + if (!dev_peer) BUG(); + tp_peer = netdev_priv(dev_peer); } - if ((tp->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 || (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0 || (tp_peer->tg3_flags & TG3_FLAG_WOL_ENABLE) != 0 || (tp_peer->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) { if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701) { - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | - (GRC_LCLCTRL_GPIO_OE0 | - GRC_LCLCTRL_GPIO_OE1 | - GRC_LCLCTRL_GPIO_OE2 | - GRC_LCLCTRL_GPIO_OUTPUT0 | - GRC_LCLCTRL_GPIO_OUTPUT1)); - udelay(100); + tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | + (GRC_LCLCTRL_GPIO_OE0 | + GRC_LCLCTRL_GPIO_OE1 | + GRC_LCLCTRL_GPIO_OE2 | + GRC_LCLCTRL_GPIO_OUTPUT0 | + GRC_LCLCTRL_GPIO_OUTPUT1), + 100); } else { u32 no_gpio2; - u32 grc_local_ctrl; + u32 grc_local_ctrl = 0; if (tp_peer != tp && (tp_peer->tg3_flags & TG3_FLAG_INIT_COMPLETE) != 0) return; + /* Workaround to prevent overdrawing Amps. */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5714) { + grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3; + tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | + grc_local_ctrl, 100); + } + /* On 5753 and variants, GPIO2 cannot be used. */ no_gpio2 = tp->nic_sram_data_cfg & NIC_SRAM_DATA_CFG_NO_GPIO2; - grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 | + grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE1 | GRC_LCLCTRL_GPIO_OE2 | GRC_LCLCTRL_GPIO_OUTPUT1 | @@ -1058,21 +1084,18 @@ static void tg3_frob_aux_power(struct tg3 *tp) grc_local_ctrl &= ~(GRC_LCLCTRL_GPIO_OE2 | GRC_LCLCTRL_GPIO_OUTPUT2); } - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | - grc_local_ctrl); - udelay(100); + tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | + grc_local_ctrl, 100); grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT0; - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | - grc_local_ctrl); - udelay(100); + tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | + grc_local_ctrl, 100); if (!no_gpio2) { grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT2; - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | - grc_local_ctrl); - udelay(100); + tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | + grc_local_ctrl, 100); } } } else { @@ -1082,19 +1105,16 @@ static void tg3_frob_aux_power(struct tg3 *tp) (tp_peer->tg3_flags & TG3_FLAG_INIT_COMPLETE) != 0) return; - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | - (GRC_LCLCTRL_GPIO_OE1 | - GRC_LCLCTRL_GPIO_OUTPUT1)); - udelay(100); + tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | + (GRC_LCLCTRL_GPIO_OE1 | + GRC_LCLCTRL_GPIO_OUTPUT1), 100); - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | - (GRC_LCLCTRL_GPIO_OE1)); - udelay(100); + tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | + GRC_LCLCTRL_GPIO_OE1, 100); - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | - (GRC_LCLCTRL_GPIO_OE1 | - GRC_LCLCTRL_GPIO_OUTPUT1)); - udelay(100); + tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl | + (GRC_LCLCTRL_GPIO_OE1 | + GRC_LCLCTRL_GPIO_OUTPUT1), 100); } } } @@ -1137,10 +1157,8 @@ static int tg3_set_power_state(struct tg3 *tp, int state) udelay(100); /* Delay after power state change */ /* Switch out of Vaux if it is not a LOM */ - if (!(tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT)) { - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl); - udelay(100); - } + if (!(tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT)) + tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl, 100); return 0; @@ -1239,10 +1257,8 @@ static int tg3_set_power_state(struct tg3 *tp, int state) base_val |= (CLOCK_CTRL_RXCLK_DISABLE | CLOCK_CTRL_TXCLK_DISABLE); - tw32_f(TG3PCI_CLOCK_CTRL, base_val | - CLOCK_CTRL_ALTCLK | - CLOCK_CTRL_PWRDOWN_PLL133); - udelay(40); + tw32_wait_f(TG3PCI_CLOCK_CTRL, base_val | CLOCK_CTRL_ALTCLK | + CLOCK_CTRL_PWRDOWN_PLL133, 40); } else if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) { /* do nothing */ } else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) && @@ -1263,11 +1279,11 @@ static int tg3_set_power_state(struct tg3 *tp, int state) newbits2 = newbits1 | CLOCK_CTRL_44MHZ_CORE; } - tw32_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits1); - udelay(40); + tw32_wait_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits1, + 40); - tw32_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits2); - udelay(40); + tw32_wait_f(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl | newbits2, + 40); if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { u32 newbits3; @@ -1281,9 +1297,8 @@ static int tg3_set_power_state(struct tg3 *tp, int state) newbits3 = CLOCK_CTRL_44MHZ_CORE; } - tw32_f(TG3PCI_CLOCK_CTRL, - tp->pci_clock_ctrl | newbits3); - udelay(40); + tw32_wait_f(TG3PCI_CLOCK_CTRL, + tp->pci_clock_ctrl | newbits3, 40); } } @@ -1294,7 +1309,8 @@ static int tg3_set_power_state(struct tg3 *tp, int state) tg3_writephy(tp, MII_TG3_EXT_CTRL, MII_TG3_EXT_CTRL_FORCE_LED_OFF); tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2); - tg3_writephy(tp, MII_BMCR, BMCR_PDOWN); + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) + tg3_writephy(tp, MII_BMCR, BMCR_PDOWN); } } @@ -7135,8 +7151,13 @@ do { p = (u32 *)(orig_p + (reg)); \ GET_REG32_LOOP(BUFMGR_MODE, 0x58); GET_REG32_LOOP(RDMAC_MODE, 0x08); GET_REG32_LOOP(WDMAC_MODE, 0x08); - GET_REG32_LOOP(RX_CPU_BASE, 0x280); - GET_REG32_LOOP(TX_CPU_BASE, 0x280); + GET_REG32_1(RX_CPU_MODE); + GET_REG32_1(RX_CPU_STATE); + GET_REG32_1(RX_CPU_PGMCTR); + GET_REG32_1(RX_CPU_HWBKPT); + GET_REG32_1(TX_CPU_MODE); + GET_REG32_1(TX_CPU_STATE); + GET_REG32_1(TX_CPU_PGMCTR); GET_REG32_LOOP(GRCMBOX_INTERRUPT_0, 0x110); GET_REG32_LOOP(FTQ_RESET, 0x120); GET_REG32_LOOP(MSGINT_MODE, 0x0c); @@ -7959,13 +7980,12 @@ static int tg3_test_memory(struct tg3 *tp) u32 offset; u32 len; } mem_tbl_570x[] = { - { 0x00000000, 0x01000}, + { 0x00000000, 0x00b50}, { 0x00002000, 0x1c000}, { 0xffffffff, 0x00000} }, mem_tbl_5705[] = { { 0x00000100, 0x0000c}, { 0x00000200, 0x00008}, - { 0x00000b50, 0x00400}, { 0x00004000, 0x00800}, { 0x00006000, 0x01000}, { 0x00008000, 0x02000}, @@ -10466,7 +10486,7 @@ static char * __devinit tg3_bus_string(struct tg3 *tp, char *str) return str; } -static struct pci_dev * __devinit tg3_find_5704_peer(struct tg3 *tp) +static struct pci_dev * __devinit tg3_find_peer(struct tg3 *tp) { struct pci_dev *peer; unsigned int func, devnr = tp->pdev->devfn & ~7; @@ -10719,8 +10739,9 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tp->rx_pending = 63; } - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) - tp->pdev_peer = tg3_find_5704_peer(tp); + if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) || + (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714)) + tp->pdev_peer = tg3_find_peer(tp); err = tg3_get_device_address(tp); if (err) { diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 94dbcf3537ec..890e1635996b 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -1124,7 +1124,14 @@ /* 0x280 --> 0x400 unused */ #define RX_CPU_BASE 0x00005000 +#define RX_CPU_MODE 0x00005000 +#define RX_CPU_STATE 0x00005004 +#define RX_CPU_PGMCTR 0x0000501c +#define RX_CPU_HWBKPT 0x00005034 #define TX_CPU_BASE 0x00005400 +#define TX_CPU_MODE 0x00005400 +#define TX_CPU_STATE 0x00005404 +#define TX_CPU_PGMCTR 0x0000541c /* Mailboxes */ #define GRCMBOX_INTERRUPT_0 0x00005800 /* 64-bit */ diff --git a/drivers/net/wireless/orinoco_nortel.c b/drivers/net/wireless/orinoco_nortel.c index d8afd51ff8a5..d1a670b35338 100644 --- a/drivers/net/wireless/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco_nortel.c @@ -1,6 +1,8 @@ /* orinoco_nortel.c * * Driver for Prism II devices which would usually be driven by orinoco_cs, + * but are connected to the PCI bus by a PCI-to-PCMCIA adapter used in + * Nortel emobility, Symbol LA-4113 and Symbol LA-4123. * but are connected to the PCI bus by a Nortel PCI-PCMCIA-Adapter. * * Copyright (C) 2002 Tobias Hoffmann @@ -165,7 +167,7 @@ static int nortel_pci_init_one(struct pci_dev *pdev, goto fail_resources; } - iomem = pci_iomap(pdev, 3, 0); + iomem = pci_iomap(pdev, 2, 0); if (!iomem) { err = -ENOMEM; goto fail_map_io; @@ -265,6 +267,8 @@ static void __devexit nortel_pci_remove_one(struct pci_dev *pdev) static struct pci_device_id nortel_pci_id_table[] = { /* Nortel emobility PCI */ {0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,}, + /* Symbol LA-4123 PCI */ + {0x1562, 0x0001, PCI_ANY_ID, PCI_ANY_ID,}, {0,}, }; diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c index 011915d5e243..f94f1f25eec6 100644 --- a/drivers/s390/net/qeth_eddp.c +++ b/drivers/s390/net/qeth_eddp.c @@ -62,7 +62,8 @@ qeth_eddp_free_context(struct qeth_eddp_context *ctx) for (i = 0; i < ctx->num_pages; ++i) free_page((unsigned long)ctx->pages[i]); kfree(ctx->pages); - kfree(ctx->elements); + if (ctx->elements != NULL) + kfree(ctx->elements); kfree(ctx); } diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index 99cceb242ec4..f8f55cc468ba 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -1,6 +1,6 @@ /* * - * linux/drivers/s390/net/qeth_main.c ($Revision: 1.242 $) + * linux/drivers/s390/net/qeth_main.c ($Revision: 1.251 $) * * Linux on zSeries OSA Express and HiperSockets support * @@ -12,7 +12,7 @@ * Frank Pavlic (fpavlic@de.ibm.com) and * Thomas Spatzier <tspat@de.ibm.com> * - * $Revision: 1.242 $ $Date: 2005/05/04 20:19:18 $ + * $Revision: 1.251 $ $Date: 2005/05/04 20:19:18 $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -72,7 +72,7 @@ #include "qeth_eddp.h" #include "qeth_tso.h" -#define VERSION_QETH_C "$Revision: 1.242 $" +#define VERSION_QETH_C "$Revision: 1.251 $" static const char *version = "qeth S/390 OSA-Express driver"; /** @@ -518,7 +518,8 @@ __qeth_set_offline(struct ccwgroup_device *cgdev, int recovery_mode) QETH_DBF_TEXT(setup, 3, "setoffl"); QETH_DBF_HEX(setup, 3, &card, sizeof(void *)); - + + netif_carrier_off(card->dev); recover_flag = card->state; if (qeth_stop_card(card, recovery_mode) == -ERESTARTSYS){ PRINT_WARN("Stopping card %s interrupted by user!\n", @@ -1020,7 +1021,6 @@ void qeth_schedule_recovery(struct qeth_card *card) { QETH_DBF_TEXT(trace,2,"startrec"); - if (qeth_set_thread_start_bit(card, QETH_RECOVER_THREAD) == 0) schedule_work(&card->kernel_thread_starter); } @@ -1710,7 +1710,6 @@ qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob) "IP address reset.\n", QETH_CARD_IFNAME(card), card->info.chpid); - netif_carrier_on(card->dev); qeth_schedule_recovery(card); return NULL; case IPA_CMD_MODCCID: @@ -1959,7 +1958,7 @@ qeth_osn_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob, { u16 s1, s2; -QETH_DBF_TEXT(trace,4,"osndipa"); + QETH_DBF_TEXT(trace,4,"osndipa"); qeth_prepare_ipa_cmd(card, iob, QETH_PROT_OSN2); s1 = (u16)(IPA_PDU_HEADER_SIZE + data_len); @@ -2203,24 +2202,21 @@ qeth_ulp_setup(struct qeth_card *card) } static inline int -qeth_check_for_inbound_error(struct qeth_qdio_buffer *buf, - unsigned int qdio_error, - unsigned int siga_error) +qeth_check_qdio_errors(struct qdio_buffer *buf, unsigned int qdio_error, + unsigned int siga_error, const char *dbftext) { - int rc = 0; - if (qdio_error || siga_error) { - QETH_DBF_TEXT(trace, 2, "qdinerr"); - QETH_DBF_TEXT(qerr, 2, "qdinerr"); + QETH_DBF_TEXT(trace, 2, dbftext); + QETH_DBF_TEXT(qerr, 2, dbftext); QETH_DBF_TEXT_(qerr, 2, " F15=%02X", - buf->buffer->element[15].flags & 0xff); + buf->element[15].flags & 0xff); QETH_DBF_TEXT_(qerr, 2, " F14=%02X", - buf->buffer->element[14].flags & 0xff); + buf->element[14].flags & 0xff); QETH_DBF_TEXT_(qerr, 2, " qerr=%X", qdio_error); QETH_DBF_TEXT_(qerr, 2, " serr=%X", siga_error); - rc = 1; + return 1; } - return rc; + return 0; } static inline struct sk_buff * @@ -2769,8 +2765,9 @@ qeth_qdio_input_handler(struct ccw_device * ccwdev, unsigned int status, for (i = first_element; i < (first_element + count); ++i) { index = i % QDIO_MAX_BUFFERS_PER_Q; buffer = &card->qdio.in_q->bufs[index]; - if (!((status == QDIO_STATUS_LOOK_FOR_ERROR) && - qeth_check_for_inbound_error(buffer, qdio_err, siga_err))) + if (!((status & QDIO_STATUS_LOOK_FOR_ERROR) && + qeth_check_qdio_errors(buffer->buffer, + qdio_err, siga_err,"qinerr"))) qeth_process_inbound_buffer(card, buffer, index); /* clear buffer and give back to hardware */ qeth_put_buffer_pool_entry(card, buffer->pool_entry); @@ -2785,12 +2782,13 @@ qeth_qdio_input_handler(struct ccw_device * ccwdev, unsigned int status, static inline int qeth_handle_send_error(struct qeth_card *card, struct qeth_qdio_out_buffer *buffer, - int qdio_err, int siga_err) + unsigned int qdio_err, unsigned int siga_err) { int sbalf15 = buffer->buffer->element[15].flags & 0xff; int cc = siga_err & 3; QETH_DBF_TEXT(trace, 6, "hdsnderr"); + qeth_check_qdio_errors(buffer->buffer, qdio_err, siga_err, "qouterr"); switch (cc) { case 0: if (qdio_err){ @@ -3047,7 +3045,8 @@ qeth_qdio_output_handler(struct ccw_device * ccwdev, unsigned int status, for(i = first_element; i < (first_element + count); ++i){ buffer = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q]; /*we only handle the KICK_IT error by doing a recovery */ - if (qeth_handle_send_error(card, buffer, qdio_error, siga_error) + if (qeth_handle_send_error(card, buffer, + qdio_error, siga_error) == QETH_SEND_ERROR_KICK_IT){ netif_stop_queue(card->dev); qeth_schedule_recovery(card); @@ -3289,7 +3288,6 @@ qeth_init_qdio_info(struct qeth_card *card) card->qdio.in_buf_pool.buf_count = card->qdio.init_pool.buf_count; INIT_LIST_HEAD(&card->qdio.in_buf_pool.entry_list); INIT_LIST_HEAD(&card->qdio.init_pool.entry_list); - /* outbound */ } static int @@ -3731,6 +3729,9 @@ qeth_verify_vlan_dev(struct net_device *dev, struct qeth_card *card) break; } } + if (rc && !(VLAN_DEV_INFO(dev)->real_dev->priv == (void *)card)) + return 0; + #endif return rc; } @@ -3807,10 +3808,8 @@ qeth_open(struct net_device *dev) card->data.state = CH_STATE_UP; card->state = CARD_STATE_UP; - if (!card->lan_online){ - if (netif_carrier_ok(dev)) - netif_carrier_off(dev); - } + if (!card->lan_online && netif_carrier_ok(dev)) + netif_carrier_off(dev); return 0; } @@ -5870,10 +5869,8 @@ qeth_add_multicast_ipv6(struct qeth_card *card) struct inet6_dev *in6_dev; QETH_DBF_TEXT(trace,4,"chkmcv6"); - if ((card->options.layer2 == 0) && - (!qeth_is_supported(card, IPA_IPV6)) ) + if (!qeth_is_supported(card, IPA_IPV6)) return ; - in6_dev = in6_dev_get(card->dev); if (in6_dev == NULL) return; @@ -7936,8 +7933,8 @@ __qeth_set_online(struct ccwgroup_device *gdev, int recovery_mode) QETH_DBF_TEXT_(setup, 2, "6err%d", rc); goto out_remove; } -/*maybe it was set offline without ifconfig down - * we can also use this state for recovery purposes*/ + netif_carrier_on(card->dev); + qeth_set_allowed_threads(card, 0xffffffff, 0); if (recover_flag == CARD_STATE_RECOVER) qeth_start_again(card, recovery_mode); diff --git a/drivers/s390/net/qeth_mpc.c b/drivers/s390/net/qeth_mpc.c index f0a080a9e515..5f8754addc14 100644 --- a/drivers/s390/net/qeth_mpc.c +++ b/drivers/s390/net/qeth_mpc.c @@ -11,7 +11,7 @@ #include <asm/cio.h> #include "qeth_mpc.h" -const char *VERSION_QETH_MPC_C = "$Revision: 1.12 $"; +const char *VERSION_QETH_MPC_C = "$Revision: 1.13 $"; unsigned char IDX_ACTIVATE_READ[]={ 0x00,0x00,0x80,0x00, 0x00,0x00,0x00,0x00, diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h index 5f71486e708c..864cec5f6c62 100644 --- a/drivers/s390/net/qeth_mpc.h +++ b/drivers/s390/net/qeth_mpc.h @@ -14,14 +14,14 @@ #include <asm/qeth.h> -#define VERSION_QETH_MPC_H "$Revision: 1.44 $" +#define VERSION_QETH_MPC_H "$Revision: 1.46 $" extern const char *VERSION_QETH_MPC_C; #define IPA_PDU_HEADER_SIZE 0x40 #define QETH_IPA_PDU_LEN_TOTAL(buffer) (buffer+0x0e) #define QETH_IPA_PDU_LEN_PDU1(buffer) (buffer+0x26) -#define QETH_IPA_PDU_LEN_PDU2(buffer) (buffer+0x2a) +#define QETH_IPA_PDU_LEN_PDU2(buffer) (buffer+0x29) #define QETH_IPA_PDU_LEN_PDU3(buffer) (buffer+0x3a) extern unsigned char IPA_PDU_HEADER[]; diff --git a/drivers/s390/net/qeth_proc.c b/drivers/s390/net/qeth_proc.c index f2ccfea8fdb8..7bf35098831e 100644 --- a/drivers/s390/net/qeth_proc.c +++ b/drivers/s390/net/qeth_proc.c @@ -1,6 +1,6 @@ /* * - * linux/drivers/s390/net/qeth_fs.c ($Revision: 1.13 $) + * linux/drivers/s390/net/qeth_fs.c ($Revision: 1.16 $) * * Linux on zSeries OSA Express and HiperSockets support * This file contains code related to procfs. @@ -21,7 +21,7 @@ #include "qeth_mpc.h" #include "qeth_fs.h" -const char *VERSION_QETH_PROC_C = "$Revision: 1.13 $"; +const char *VERSION_QETH_PROC_C = "$Revision: 1.16 $"; /***** /proc/qeth *****/ #define QETH_PROCFILE_NAME "qeth" @@ -30,30 +30,26 @@ static struct proc_dir_entry *qeth_procfile; static int qeth_procfile_seq_match(struct device *dev, void *data) { - return 1; + return(dev ? 1 : 0); } static void * qeth_procfile_seq_start(struct seq_file *s, loff_t *offset) { - struct device *dev; - loff_t nr; - + struct device *dev = NULL; + loff_t nr = 0; + down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); - - nr = *offset; - if (nr == 0) + if (*offset == 0) return SEQ_START_TOKEN; - - dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL, - NULL, qeth_procfile_seq_match); - - /* get card at pos *offset */ - nr = *offset; - while (nr-- > 1 && dev) + while (1) { dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev, NULL, qeth_procfile_seq_match); - return (void *) dev; + if (++nr == *offset) + break; + put_device(dev); + } + return dev; } static void @@ -66,19 +62,14 @@ static void * qeth_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset) { struct device *prev, *next; - - if (it == SEQ_START_TOKEN) { - next = driver_find_device(&qeth_ccwgroup_driver.driver, - NULL, NULL, qeth_procfile_seq_match); - if (next) - (*offset)++; - return (void *) next; - } - prev = (struct device *) it; + + if (it == SEQ_START_TOKEN) + prev = NULL; + else + prev = (struct device *) it; next = driver_find_device(&qeth_ccwgroup_driver.driver, prev, NULL, qeth_procfile_seq_match); - if (next) - (*offset)++; + (*offset)++; return (void *) next; } @@ -87,7 +78,7 @@ qeth_get_router_str(struct qeth_card *card, int ipv) { int routing_type = 0; - if (ipv == 4){ + if (ipv == 4) { routing_type = card->options.route4.type; } else { #ifdef CONFIG_QETH_IPV6 @@ -154,6 +145,7 @@ qeth_procfile_seq_show(struct seq_file *s, void *it) card->qdio.in_buf_pool.buf_count); else seq_printf(s, " +++ LAN OFFLINE +++\n"); + put_device(device); } return 0; } @@ -184,51 +176,16 @@ static struct file_operations qeth_procfile_fops = { static struct proc_dir_entry *qeth_perf_procfile; #ifdef CONFIG_QETH_PERF_STATS - -static void * -qeth_perf_procfile_seq_start(struct seq_file *s, loff_t *offset) -{ - struct device *dev = NULL; - int nr; - - down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); - /* get card at pos *offset */ - dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL, NULL, - qeth_procfile_seq_match); - - /* get card at pos *offset */ - nr = *offset; - while (nr-- > 1 && dev) - dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev, - NULL, qeth_procfile_seq_match); - return (void *) dev; -} - -static void -qeth_perf_procfile_seq_stop(struct seq_file *s, void* it) -{ - up_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); -} - -static void * -qeth_perf_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset) -{ - struct device *prev, *next; - - prev = (struct device *) it; - next = driver_find_device(&qeth_ccwgroup_driver.driver, prev, - NULL, qeth_procfile_seq_match); - if (next) - (*offset)++; - return (void *) next; -} - static int qeth_perf_procfile_seq_show(struct seq_file *s, void *it) { struct device *device; struct qeth_card *card; + + if (it == SEQ_START_TOKEN) + return 0; + device = (struct device *) it; card = device->driver_data; seq_printf(s, "For card with devnos %s/%s/%s (%s):\n", @@ -295,13 +252,14 @@ qeth_perf_procfile_seq_show(struct seq_file *s, void *it) card->perf_stats.outbound_do_qdio_time, card->perf_stats.outbound_do_qdio_cnt ); + put_device(device); return 0; } static struct seq_operations qeth_perf_procfile_seq_ops = { - .start = qeth_perf_procfile_seq_start, - .stop = qeth_perf_procfile_seq_stop, - .next = qeth_perf_procfile_seq_next, + .start = qeth_procfile_seq_start, + .stop = qeth_procfile_seq_stop, + .next = qeth_procfile_seq_next, .show = qeth_perf_procfile_seq_show, }; @@ -324,93 +282,6 @@ static struct file_operations qeth_perf_procfile_fops = { #define qeth_perf_procfile_created 1 #endif /* CONFIG_QETH_PERF_STATS */ -/***** /proc/qeth_ipa_takeover *****/ -#define QETH_IPATO_PROCFILE_NAME "qeth_ipa_takeover" -static struct proc_dir_entry *qeth_ipato_procfile; - -static void * -qeth_ipato_procfile_seq_start(struct seq_file *s, loff_t *offset) -{ - struct device *dev; - loff_t nr; - - down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); - /* TODO: finish this */ - /* - * maybe SEQ_SATRT_TOKEN can be returned for offset 0 - * output driver settings then; - * else output setting for respective card - */ - - dev = driver_find_device(&qeth_ccwgroup_driver.driver, NULL, NULL, - qeth_procfile_seq_match); - - /* get card at pos *offset */ - nr = *offset; - while (nr-- > 1 && dev) - dev = driver_find_device(&qeth_ccwgroup_driver.driver, dev, - NULL, qeth_procfile_seq_match); - return (void *) dev; -} - -static void -qeth_ipato_procfile_seq_stop(struct seq_file *s, void* it) -{ - up_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); -} - -static void * -qeth_ipato_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset) -{ - struct device *prev, *next; - - prev = (struct device *) it; - next = driver_find_device(&qeth_ccwgroup_driver.driver, prev, - NULL, qeth_procfile_seq_match); - if (next) - (*offset)++; - return (void *) next; -} - -static int -qeth_ipato_procfile_seq_show(struct seq_file *s, void *it) -{ - struct device *device; - struct qeth_card *card; - - /* TODO: finish this */ - /* - * maybe SEQ_SATRT_TOKEN can be returned for offset 0 - * output driver settings then; - * else output setting for respective card - */ - device = (struct device *) it; - card = device->driver_data; - - return 0; -} - -static struct seq_operations qeth_ipato_procfile_seq_ops = { - .start = qeth_ipato_procfile_seq_start, - .stop = qeth_ipato_procfile_seq_stop, - .next = qeth_ipato_procfile_seq_next, - .show = qeth_ipato_procfile_seq_show, -}; - -static int -qeth_ipato_procfile_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &qeth_ipato_procfile_seq_ops); -} - -static struct file_operations qeth_ipato_procfile_fops = { - .owner = THIS_MODULE, - .open = qeth_ipato_procfile_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - int __init qeth_create_procfs_entries(void) { @@ -426,13 +297,7 @@ qeth_create_procfs_entries(void) qeth_perf_procfile->proc_fops = &qeth_perf_procfile_fops; #endif /* CONFIG_QETH_PERF_STATS */ - qeth_ipato_procfile = create_proc_entry(QETH_IPATO_PROCFILE_NAME, - S_IFREG | 0444, NULL); - if (qeth_ipato_procfile) - qeth_ipato_procfile->proc_fops = &qeth_ipato_procfile_fops; - if (qeth_procfile && - qeth_ipato_procfile && qeth_perf_procfile_created) return 0; else @@ -446,62 +311,5 @@ qeth_remove_procfs_entries(void) remove_proc_entry(QETH_PROCFILE_NAME, NULL); if (qeth_perf_procfile) remove_proc_entry(QETH_PERF_PROCFILE_NAME, NULL); - if (qeth_ipato_procfile) - remove_proc_entry(QETH_IPATO_PROCFILE_NAME, NULL); } - -/* ONLY FOR DEVELOPMENT! -> make it as module */ -/* -static void -qeth_create_sysfs_entries(void) -{ - struct device *dev; - - down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); - - list_for_each_entry(dev, &qeth_ccwgroup_driver.driver.devices, - driver_list) - qeth_create_device_attributes(dev); - - up_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); -} - -static void -qeth_remove_sysfs_entries(void) -{ - struct device *dev; - - down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); - - list_for_each_entry(dev, &qeth_ccwgroup_driver.driver.devices, - driver_list) - qeth_remove_device_attributes(dev); - - up_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem); -} - -static int __init -qeth_fs_init(void) -{ - printk(KERN_INFO "qeth_fs_init\n"); - qeth_create_procfs_entries(); - qeth_create_sysfs_entries(); - - return 0; -} - -static void __exit -qeth_fs_exit(void) -{ - printk(KERN_INFO "qeth_fs_exit\n"); - qeth_remove_procfs_entries(); - qeth_remove_sysfs_entries(); -} - - -module_init(qeth_fs_init); -module_exit(qeth_fs_exit); - -MODULE_LICENSE("GPL"); -*/ diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c index ddd6019ba092..0ea185f70f75 100644 --- a/drivers/s390/net/qeth_sys.c +++ b/drivers/s390/net/qeth_sys.c @@ -1,6 +1,6 @@ /* * - * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.58 $) + * linux/drivers/s390/net/qeth_sys.c ($Revision: 1.60 $) * * Linux on zSeries OSA Express and HiperSockets support * This file contains code related to sysfs. @@ -20,7 +20,7 @@ #include "qeth_mpc.h" #include "qeth_fs.h" -const char *VERSION_QETH_SYS_C = "$Revision: 1.58 $"; +const char *VERSION_QETH_SYS_C = "$Revision: 1.60 $"; /*****************************************************************************/ /* */ @@ -160,7 +160,7 @@ qeth_dev_portname_store(struct device *dev, struct device_attribute *attr, const return -EPERM; tmp = strsep((char **) &buf, "\n"); - if ((strlen(tmp) > 8) || (strlen(tmp) < 2)) + if ((strlen(tmp) > 8) || (strlen(tmp) == 0)) return -EINVAL; card->info.portname[0] = strlen(tmp); diff --git a/drivers/s390/net/qeth_tso.h b/drivers/s390/net/qeth_tso.h index e245af3c4cbd..3c50b6f24f51 100644 --- a/drivers/s390/net/qeth_tso.h +++ b/drivers/s390/net/qeth_tso.h @@ -1,5 +1,5 @@ /* - * linux/drivers/s390/net/qeth_tso.h ($Revision: 1.7 $) + * linux/drivers/s390/net/qeth_tso.h ($Revision: 1.8 $) * * Header file for qeth TCP Segmentation Offload support. * @@ -7,7 +7,7 @@ * * Author(s): Frank Pavlic <fpavlic@de.ibm.com> * - * $Revision: 1.7 $ $Date: 2005/05/04 20:19:18 $ + * $Revision: 1.8 $ $Date: 2005/05/04 20:19:18 $ * */ #ifndef __QETH_TSO_H__ diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index f286a6f1c0db..e0439be4b573 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2046,7 +2046,7 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc) else { u8 *scsicmd = cmd->cmnd; - if (scsicmd[0] == INQUIRY) { + if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { u8 *buf = NULL; unsigned int buflen; @@ -2060,9 +2060,6 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc) * device. 2) Ensure response data format / ATAPI information * are always correct. */ - /* FIXME: do we ever override EVPD pages and the like, with - * this code? - */ if (buf[2] == 0) { buf[2] = 0x5; buf[3] = 0x32; diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 94e5167f260d..4e6709f448e1 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -400,6 +400,36 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, return found_target; } +struct work_queue_wrapper { + struct work_struct work; + struct scsi_target *starget; +}; + +static void scsi_target_reap_work(void *data) { + struct work_queue_wrapper *wqw = (struct work_queue_wrapper *)data; + struct scsi_target *starget = wqw->starget; + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + unsigned long flags; + + kfree(wqw); + + spin_lock_irqsave(shost->host_lock, flags); + + if (--starget->reap_ref == 0 && list_empty(&starget->devices)) { + list_del_init(&starget->siblings); + spin_unlock_irqrestore(shost->host_lock, flags); + transport_remove_device(&starget->dev); + device_del(&starget->dev); + transport_destroy_device(&starget->dev); + put_device(&starget->dev); + return; + + } + spin_unlock_irqrestore(shost->host_lock, flags); + + return; +} + /** * scsi_target_reap - check to see if target is in use and destroy if not * @@ -411,19 +441,18 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, */ void scsi_target_reap(struct scsi_target *starget) { - struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); - unsigned long flags; - spin_lock_irqsave(shost->host_lock, flags); + struct work_queue_wrapper *wqw = + kzalloc(sizeof(struct work_queue_wrapper), GFP_ATOMIC); - if (--starget->reap_ref == 0 && list_empty(&starget->devices)) { - list_del_init(&starget->siblings); - spin_unlock_irqrestore(shost->host_lock, flags); - device_del(&starget->dev); - transport_unregister_device(&starget->dev); - put_device(&starget->dev); + if (!wqw) { + starget_printk(KERN_ERR, starget, + "Failed to allocate memory in scsi_reap_target()\n"); return; } - spin_unlock_irqrestore(shost->host_lock, flags); + + INIT_WORK(&wqw->work, scsi_target_reap_work, wqw); + wqw->starget = starget; + schedule_work(&wqw->work); } /** diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 6cd5931d9a54..2a1a99a2ef56 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -105,6 +105,7 @@ static struct { { FC_PORTSTATE_LINKDOWN, "Linkdown" }, { FC_PORTSTATE_ERROR, "Error" }, { FC_PORTSTATE_LOOPBACK, "Loopback" }, + { FC_PORTSTATE_DELETED, "Deleted" }, }; fc_enum_name_search(port_state, fc_port_state, fc_port_state_names) #define FC_PORTSTATE_MAX_NAMELEN 20 @@ -211,6 +212,7 @@ fc_bitfield_name_search(remote_port_roles, fc_remote_port_role_names) #define FC_MGMTSRVR_PORTID 0x00000a +static void fc_shost_remove_rports(void *data); static void fc_timeout_deleted_rport(void *data); static void fc_scsi_scan_rport(void *data); static void fc_rport_terminate(struct fc_rport *rport); @@ -318,6 +320,8 @@ static int fc_host_setup(struct transport_container *tc, struct device *dev, fc_host_next_rport_number(shost) = 0; fc_host_next_target_id(shost) = 0; + fc_host_flags(shost) = 0; + INIT_WORK(&fc_host_rport_del_work(shost), fc_shost_remove_rports, shost); return 0; } @@ -387,6 +391,7 @@ show_fc_rport_##field (struct class_device *cdev, char *buf) \ struct fc_internal *i = to_fc_internal(shost->transportt); \ if ((i->f->get_rport_##field) && \ !((rport->port_state == FC_PORTSTATE_BLOCKED) || \ + (rport->port_state == FC_PORTSTATE_DELETED) || \ (rport->port_state == FC_PORTSTATE_NOTPRESENT))) \ i->f->get_rport_##field(rport); \ return snprintf(buf, sz, format_string, cast rport->field); \ @@ -402,6 +407,7 @@ store_fc_rport_##field(struct class_device *cdev, const char *buf, \ struct Scsi_Host *shost = rport_to_shost(rport); \ struct fc_internal *i = to_fc_internal(shost->transportt); \ if ((rport->port_state == FC_PORTSTATE_BLOCKED) || \ + (rport->port_state == FC_PORTSTATE_DELETED) || \ (rport->port_state == FC_PORTSTATE_NOTPRESENT)) \ return -EBUSY; \ val = simple_strtoul(buf, NULL, 0); \ @@ -519,6 +525,7 @@ store_fc_rport_dev_loss_tmo(struct class_device *cdev, const char *buf, struct Scsi_Host *shost = rport_to_shost(rport); struct fc_internal *i = to_fc_internal(shost->transportt); if ((rport->port_state == FC_PORTSTATE_BLOCKED) || + (rport->port_state == FC_PORTSTATE_DELETED) || (rport->port_state == FC_PORTSTATE_NOTPRESENT)) return -EBUSY; val = simple_strtoul(buf, NULL, 0); @@ -1769,7 +1776,7 @@ fc_timeout_deleted_rport(void *data) rport->maxframe_size = -1; rport->supported_classes = FC_COS_UNSPECIFIED; rport->roles = FC_RPORT_ROLE_UNKNOWN; - rport->port_state = FC_PORTSTATE_NOTPRESENT; + rport->port_state = FC_PORTSTATE_DELETED; /* remove the identifiers that aren't used in the consisting binding */ switch (fc_host_tgtid_bind_type(shost)) { @@ -1789,14 +1796,23 @@ fc_timeout_deleted_rport(void *data) break; } - spin_unlock_irqrestore(shost->host_lock, flags); - /* * As this only occurs if the remote port (scsi target) * went away and didn't come back - we'll remove * all attached scsi devices. + * + * We'll schedule the shost work item to perform the actual removal + * to avoid recursion in the different flush calls if we perform + * the removal in each target - and there are lots of targets + * whose timeouts fire at the same time. */ - fc_rport_tgt_remove(rport); + + if ( !(fc_host_flags(shost) & FC_SHOST_RPORT_DEL_SCHEDULED)) { + fc_host_flags(shost) |= FC_SHOST_RPORT_DEL_SCHEDULED; + scsi_queue_work(shost, &fc_host_rport_del_work(shost)); + } + + spin_unlock_irqrestore(shost->host_lock, flags); } /** @@ -1818,6 +1834,41 @@ fc_scsi_scan_rport(void *data) } +/** + * fc_shost_remove_rports - called to remove all rports that are marked + * as in a deleted (not connected) state. + * + * @data: shost whose rports are to be looked at + **/ +static void +fc_shost_remove_rports(void *data) +{ + struct Scsi_Host *shost = (struct Scsi_Host *)data; + struct fc_rport *rport, *next_rport; + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + while (fc_host_flags(shost) & FC_SHOST_RPORT_DEL_SCHEDULED) { + + fc_host_flags(shost) &= ~FC_SHOST_RPORT_DEL_SCHEDULED; + +restart_search: + list_for_each_entry_safe(rport, next_rport, + &fc_host_rport_bindings(shost), peers) { + if (rport->port_state == FC_PORTSTATE_DELETED) { + rport->port_state = FC_PORTSTATE_NOTPRESENT; + spin_unlock_irqrestore(shost->host_lock, flags); + fc_rport_tgt_remove(rport); + spin_lock_irqsave(shost->host_lock, flags); + goto restart_search; + } + } + + } + spin_unlock_irqrestore(shost->host_lock, flags); +} + + MODULE_AUTHOR("Martin Hicks"); MODULE_DESCRIPTION("FC Transport Attributes"); MODULE_LICENSE("GPL"); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index ad47c1b84c3f..812bae62c8ec 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -10,7 +10,7 @@ menu "Serial drivers" # The new 8250/16550 serial drivers config SERIAL_8250 tristate "8250/16550 and compatible serial support" - depends on (BROKEN || !(SPARC64 || SPARC32)) + depends on (BROKEN || !SPARC) select SERIAL_CORE ---help--- This selects whether you want to include the driver for the standard @@ -469,14 +469,14 @@ config SERIAL_IMX_CONSOLE config SERIAL_SUNCORE bool - depends on SPARC32 || SPARC64 + depends on SPARC select SERIAL_CORE select SERIAL_CORE_CONSOLE default y config SERIAL_SUNZILOG tristate "Sun Zilog8530 serial support" - depends on SPARC32 || SPARC64 + depends on SPARC help This driver supports the Zilog8530 serial ports found on many Sparc systems. Say Y or M if you want to be able to these serial ports. @@ -491,7 +491,7 @@ config SERIAL_SUNZILOG_CONSOLE config SERIAL_SUNSU tristate "Sun SU serial support" - depends on (SPARC32 || SPARC64) && PCI + depends on SPARC && PCI help This driver supports the 8250 serial ports that run the keyboard and mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able @@ -547,7 +547,7 @@ config PDC_CONSOLE config SERIAL_SUNSAB tristate "Sun Siemens SAB82532 serial support" - depends on (SPARC32 || SPARC64) && PCI + depends on SPARC && PCI help This driver supports the Siemens SAB82532 DUSCC serial ports on newer (PCI) UltraSPARC systems. Say Y or M if you want to be able to these diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 89d7bd3eaee3..d84476ee6592 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -160,7 +160,7 @@ pl011_rx_chars(struct uart_amba_port *uap) flag = TTY_FRAME; } - if (uart_handle_sysrq_char(&uap->port, ch, regs)) + if (uart_handle_sysrq_char(&uap->port, ch & 255, regs)) goto ignore_char; uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index ff5e6309d682..cc998b99a19f 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -361,7 +361,7 @@ static int serial_pxa_startup(struct uart_port *port) if (port->line == 3) /* HWUART */ up->mcr |= UART_MCR_AFE; else - up->mcr = 0; + up->mcr = 0; /* * Allocate the IRQ @@ -641,7 +641,7 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count) int i; /* - * First save the UER then disable the interrupts + * First save the IER then disable the interrupts */ ier = serial_in(up, UART_IER); serial_out(up, UART_IER, UART_IER_UUE); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index e197ce9353de..e80ef9467825 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1432,7 +1432,8 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message) mark_quiesced(intf); } else { // FIXME else if there's no suspend method, disconnect... - dev_warn(dev, "no %s?\n", "suspend"); + dev_warn(dev, "no suspend for driver %s?\n", driver->name); + mark_quiesced(intf); status = 0; } return status; @@ -1460,8 +1461,10 @@ static int usb_generic_resume(struct device *dev) } if ((dev->driver == NULL) || - (dev->driver_data == &usb_generic_driver_data)) + (dev->driver_data == &usb_generic_driver_data)) { + dev->power.power_state.event = PM_EVENT_FREEZE; return 0; + } intf = to_usb_interface(dev); driver = to_usb_driver(dev->driver); @@ -1481,7 +1484,7 @@ static int usb_generic_resume(struct device *dev) mark_quiesced(intf); } } else - dev_warn(dev, "no %s?\n", "resume"); + dev_warn(dev, "no resume for driver %s?\n", driver->name); return 0; } diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 1c3b472a3bca..0e2505c073db 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -2103,7 +2103,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) * values. */ input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0); - input_set_abs_params(inputdev, ABS_X, 0, 2249, 0, 0); + input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0); input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0); input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0); diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c index a248664b5d1d..fd48e74e78ed 100644 --- a/drivers/usb/input/kbtab.c +++ b/drivers/usb/input/kbtab.c @@ -159,7 +159,7 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH); input_dev->mscbit[0] |= BIT(MSC_SERIAL); input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0); - input_set_abs_params(input_dev, ABS_X, 0, 0x1750, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0); input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0); endpoint = &intf->cur_altsetting->endpoint[0].desc; diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c index aea1cfae34cc..dc099bbe12bf 100644 --- a/drivers/usb/input/wacom.c +++ b/drivers/usb/input/wacom.c @@ -854,7 +854,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS); input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS); - input_set_abs_params(input_dev, ABS_X, 0, wacom->features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_X, 0, wacom->features->x_max, 4, 0); input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0); input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0); diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 4837524eada7..4ef5527028c5 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -109,7 +109,7 @@ static int slave_configure(struct scsi_device *sdev) * data comes from. */ if (sdev->scsi_level < SCSI_2) - sdev->scsi_level = SCSI_2; + sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2; /* According to the technical support people at Genesys Logic, * devices using their chips have problems transferring more than @@ -162,7 +162,7 @@ static int slave_configure(struct scsi_device *sdev) * a Get-Max-LUN request, we won't lose much by setting the * revision level down to 2. The only devices that would be * affected are those with sparse LUNs. */ - sdev->scsi_level = SCSI_2; + sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2; /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable * Hardware Error) when any low-level error occurs, diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 3e470c8b4193..cc8e3bf5001b 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -536,13 +536,13 @@ config FB_SUN3 config FB_SBUS bool "SBUS and UPA framebuffers" - depends on (FB = y) && (SPARC32 || SPARC64) + depends on (FB = y) && SPARC help Say Y if you want support for SBUS or UPA based frame buffer device. config FB_BW2 bool "BWtwo support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -551,7 +551,7 @@ config FB_BW2 config FB_CG3 bool "CGthree support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -560,7 +560,7 @@ config FB_CG3 config FB_CG6 bool "CGsix (GX,TurboGX) support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help @@ -1268,7 +1268,7 @@ config FB_LEO config FB_PCI bool "PCI framebuffers" - depends on (FB = y) && PCI && (SPARC64 || SPARC32) + depends on (FB = y) && PCI && SPARC config FB_IGA bool "IGA 168x display support" diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 5f74df993406..a5d09e159cd1 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -6,7 +6,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EMBEDDED || !X86 - depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC32 && !SPARC64 && !M68K && !PARISC && !ARCH_VERSATILE + depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !ARCH_VERSATILE default y help Saying Y here will allow you to use Linux in text mode through a @@ -68,7 +68,7 @@ config SGI_NEWPORT_CONSOLE config PROM_CONSOLE bool "PROM console" - depends on SPARC32 || SPARC64 + depends on SPARC help Say Y to build a console driver for Sun machines that uses the terminal emulation built into their console PROMS. @@ -136,7 +136,7 @@ config FONTS config FONT_8x8 bool "VGA 8x8 font" if FONTS depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE - default y if !SPARC32 && !SPARC64 && !FONTS + default y if !SPARC && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one provided by the text console 80x50 (and higher) modes). @@ -150,7 +150,7 @@ config FONT_8x8 config FONT_8x16 bool "VGA 8x16 font" if FONTS depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON - default y if !SPARC32 && !SPARC64 && !FONTS + default y if !SPARC && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one provided by the VGA text console 80x25 mode. @@ -160,7 +160,7 @@ config FONT_8x16 config FONT_6x11 bool "Mac console 6x11 font (not supported by all drivers)" if FONTS depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE - default y if !SPARC32 && !SPARC64 && !FONTS && MAC + default y if !SPARC && !FONTS && MAC help Small console font with Macintosh-style high-half glyphs. Some Mac framebuffer drivers don't support this one at all. @@ -176,7 +176,7 @@ config FONT_7x14 config FONT_PEARL_8x8 bool "Pearl (old m68k) console 8x8 font" if FONTS depends on FRAMEBUFFER_CONSOLE - default y if !SPARC32 && !SPARC64 && !FONTS && AMIGA + default y if !SPARC && !FONTS && AMIGA help Small console font with PC-style control-character and high-half glyphs. @@ -184,24 +184,24 @@ config FONT_PEARL_8x8 config FONT_ACORN_8x8 bool "Acorn console 8x8 font" if FONTS depends on FRAMEBUFFER_CONSOLE - default y if !SPARC32 && !SPARC64 && !FONTS && ARM && ARCH_ACORN + default y if !SPARC && !FONTS && ARM && ARCH_ACORN help Small console font with PC-style control characters and high-half glyphs. config FONT_MINI_4x6 bool "Mini 4x6 font" - depends on !SPARC32 && !SPARC64 && FONTS + depends on !SPARC && FONTS config FONT_SUN8x16 bool "Sparc console 8x16 font" - depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64) + depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC) help This is the high resolution console font for Sun machines. Say Y. config FONT_SUN12x22 bool "Sparc console 12x22 font (not supported by all drivers)" - depends on FRAMEBUFFER_CONSOLE && (!SPARC32 && !SPARC64 && FONTS || SPARC32 || SPARC64) + depends on FRAMEBUFFER_CONSOLE && (!SPARC && FONTS || SPARC) help This is the high resolution console font for Sun machines with very big letters (like the letters used in the SPARC PROM). If the diff --git a/drivers/video/console/fbcon_ud.c b/drivers/video/console/fbcon_ud.c index c4d7c89212b4..9dd059e8b645 100644 --- a/drivers/video/console/fbcon_ud.c +++ b/drivers/video/console/fbcon_ud.c @@ -420,13 +420,15 @@ static void ud_cursor(struct vc_data *vc, struct fb_info *info, int ud_update_start(struct fb_info *info) { struct fbcon_ops *ops = info->fbcon_par; - u32 xoffset, yoffset; + int xoffset, yoffset; u32 vyres = GETVYRES(ops->p->scrollmode, info); u32 vxres = GETVXRES(ops->p->scrollmode, info); int err; - xoffset = (vxres - info->var.xres) - ops->var.xoffset; - yoffset = (vyres - info->var.yres) - ops->var.yoffset; + xoffset = vxres - info->var.xres - ops->var.xoffset; + yoffset = vyres - info->var.yres - ops->var.yoffset; + if (yoffset < 0) + yoffset += vyres; ops->var.xoffset = xoffset; ops->var.yoffset = yoffset; err = fb_pan_display(info, &ops->var); diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/intelfb/intelfb.h index f077ca34faba..da29d007f215 100644 --- a/drivers/video/intelfb/intelfb.h +++ b/drivers/video/intelfb/intelfb.h @@ -41,6 +41,10 @@ /*** hw-related values ***/ +/* Resource Allocation */ +#define INTELFB_FB_ACQUIRED 1 +#define INTELFB_MMIO_ACQUIRED 2 + /* PCI ids for supported devices */ #define PCI_DEVICE_ID_INTEL_830M 0x3577 #define PCI_DEVICE_ID_INTEL_845G 0x2562 @@ -257,6 +261,7 @@ struct intelfb_info { int hwcursor; int fixed_mode; int ring_active; + int flag; /* hw cursor */ int cursor_on; diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index 427689e584da..0090544842f5 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -135,9 +135,6 @@ static void __devinit get_initial_mode(struct intelfb_info *dinfo); static void update_dinfo(struct intelfb_info *dinfo, struct fb_var_screeninfo *var); -static int intelfb_get_fix(struct fb_fix_screeninfo *fix, - struct fb_info *info); - static int intelfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); static int intelfb_set_par(struct fb_info *info); @@ -473,9 +470,9 @@ cleanup(struct intelfb_info *dinfo) if (dinfo->aperture.virtual) iounmap((void __iomem *)dinfo->aperture.virtual); - if (dinfo->mmio_base_phys) + if (dinfo->flag & INTELFB_MMIO_ACQUIRED) release_mem_region(dinfo->mmio_base_phys, INTEL_REG_SIZE); - if (dinfo->aperture.physical) + if (dinfo->flag & INTELFB_FB_ACQUIRED) release_mem_region(dinfo->aperture.physical, dinfo->aperture.size); framebuffer_release(dinfo->info); @@ -572,6 +569,9 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) cleanup(dinfo); return -ENODEV; } + + dinfo->flag |= INTELFB_FB_ACQUIRED; + if (!request_mem_region(dinfo->mmio_base_phys, INTEL_REG_SIZE, INTELFB_MODULE_NAME)) { @@ -580,6 +580,8 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENODEV; } + dinfo->flag |= INTELFB_MMIO_ACQUIRED; + /* Get the chipset info. */ dinfo->pci_chipset = pdev->device; @@ -1091,7 +1093,17 @@ intelfb_set_fbinfo(struct intelfb_info *dinfo) return 1; info->pixmap.scan_align = 1; - + strcpy(info->fix.id, dinfo->name); + info->fix.smem_start = dinfo->fb.physical; + info->fix.smem_len = dinfo->fb.size; + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.type_aux = 0; + info->fix.xpanstep = 8; + info->fix.ypanstep = 1; + info->fix.ywrapstep = 0; + info->fix.mmio_start = dinfo->mmio_base_phys; + info->fix.mmio_len = INTEL_REG_SIZE; + info->fix.accel = FB_ACCEL_I830; update_dinfo(dinfo, &info->var); return 0; @@ -1109,7 +1121,8 @@ update_dinfo(struct intelfb_info *dinfo, struct fb_var_screeninfo *var) dinfo->yres = var->xres; dinfo->pixclock = var->pixclock; - intelfb_get_fix(&dinfo->info->fix, dinfo->info); + dinfo->info->fix.visual = dinfo->visual; + dinfo->info->fix.line_length = dinfo->pitch; switch (dinfo->bpp) { case 8: @@ -1139,30 +1152,6 @@ update_dinfo(struct intelfb_info *dinfo, struct fb_var_screeninfo *var) /* fbops functions */ -static int -intelfb_get_fix(struct fb_fix_screeninfo *fix, struct fb_info *info) -{ - struct intelfb_info *dinfo = GET_DINFO(info); - - DBG_MSG("intelfb_get_fix\n"); - - memset(fix, 0, sizeof(*fix)); - strcpy(fix->id, dinfo->name); - fix->smem_start = dinfo->fb.physical; - fix->smem_len = dinfo->fb.size; - fix->type = FB_TYPE_PACKED_PIXELS; - fix->type_aux = 0; - fix->visual = dinfo->visual; - fix->xpanstep = 8; - fix->ypanstep = 1; - fix->ywrapstep = 0; - fix->line_length = dinfo->pitch; - fix->mmio_start = dinfo->mmio_base_phys; - fix->mmio_len = INTEL_REG_SIZE; - fix->accel = FB_ACCEL_I830; - return 0; -} - /*************************************************************** * fbdev interface * ***************************************************************/ diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig index 8cb7fb4db441..f0e6512c87ff 100644 --- a/drivers/video/logo/Kconfig +++ b/drivers/video/logo/Kconfig @@ -47,7 +47,7 @@ config LOGO_SGI_CLUT224 config LOGO_SUN_CLUT224 bool "224-color Sun Linux logo" - depends on LOGO && (SPARC32 || SPARC64) + depends on LOGO && SPARC default y config LOGO_SUPERH_MONO diff --git a/drivers/video/sbuslib.c b/drivers/video/sbuslib.c index 646c43f921c5..3a74a63dd4f2 100644 --- a/drivers/video/sbuslib.c +++ b/drivers/video/sbuslib.c @@ -46,6 +46,9 @@ int sbusfb_mmap_helper(struct sbus_mmap_map *map, unsigned long off; int i; + if (!(vma->vm_flags & (VM_SHARED | VM_MAYSHARE))) + return -EINVAL; + size = vma->vm_end - vma->vm_start; if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) return -EINVAL; |