diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/usb/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/usb/cdc_ether.c | 9 | ||||
| -rw-r--r-- | drivers/net/usb/r815x.c | 231 |
3 files changed, 239 insertions, 3 deletions
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 9ab5c9d4b45a..e8171784529d 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o asix-y := asix_devices.o asix_common.o ax88172a.o obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o -obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o +obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r815x.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 4393f1483126..03ad4dc293aa 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -646,13 +646,18 @@ static const struct usb_device_id products [] = { }, /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */ -#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE) { USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), .driver_info = 0, }, -#endif + +/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */ +{ + USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), + .driver_info = 0, +}, /* * WHITELIST!!! diff --git a/drivers/net/usb/r815x.c b/drivers/net/usb/r815x.c new file mode 100644 index 000000000000..65167377ff09 --- /dev/null +++ b/drivers/net/usb/r815x.c @@ -0,0 +1,231 @@ +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/usb/cdc.h> +#include <linux/usb/usbnet.h> + +#define RTL815x_REQT_READ 0xc0 +#define RTL815x_REQT_WRITE 0x40 +#define RTL815x_REQ_GET_REGS 0x05 +#define RTL815x_REQ_SET_REGS 0x05 + +#define MCU_TYPE_PLA 0x0100 +#define OCP_BASE 0xe86c +#define BASE_MII 0xa400 + +#define BYTE_EN_DWORD 0xff +#define BYTE_EN_WORD 0x33 +#define BYTE_EN_BYTE 0x11 + +#define R815x_PHY_ID 32 +#define REALTEK_VENDOR_ID 0x0bda + + +static int pla_read_word(struct usb_device *udev, u16 index) +{ + int data, ret; + u8 shift = index & 2; + + index &= ~3; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + RTL815x_REQ_GET_REGS, RTL815x_REQT_READ, + index, MCU_TYPE_PLA, &data, sizeof(data), 500); + if (ret < 0) + return ret; + + data = __le32_to_cpu(data); + data >>= (shift * 8); + data &= 0xffff; + + return data; +} + +static int pla_write_word(struct usb_device *udev, u16 index, u32 data) +{ + u32 tmp, mask = 0xffff; + u16 byen = BYTE_EN_WORD; + u8 shift = index & 2; + int ret; + + data &= mask; + + if (shift) { + byen <<= shift; + mask <<= (shift * 8); + data <<= (shift * 8); + index &= ~3; + } + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + RTL815x_REQ_GET_REGS, RTL815x_REQT_READ, + index, MCU_TYPE_PLA, &tmp, sizeof(tmp), 500); + if (ret < 0) + return ret; + + tmp = __le32_to_cpu(tmp) & ~mask; + tmp |= data; + tmp = __cpu_to_le32(tmp); + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + RTL815x_REQ_SET_REGS, RTL815x_REQT_WRITE, + index, MCU_TYPE_PLA | byen, &tmp, + sizeof(tmp), 500); + + return ret; +} + +static int ocp_reg_read(struct usbnet *dev, u16 addr) +{ + u16 ocp_base, ocp_index; + int ret; + + ocp_base = addr & 0xf000; + ret = pla_write_word(dev->udev, OCP_BASE, ocp_base); + if (ret < 0) + goto out; + + ocp_index = (addr & 0x0fff) | 0xb000; + ret = pla_read_word(dev->udev, ocp_index); + +out: + return ret; +} + +static int ocp_reg_write(struct usbnet *dev, u16 addr, u16 data) +{ + u16 ocp_base, ocp_index; + int ret; + + ocp_base = addr & 0xf000; + ret = pla_write_word(dev->udev, OCP_BASE, ocp_base); + if (ret < 0) + goto out1; + + ocp_index = (addr & 0x0fff) | 0xb000; + ret = pla_write_word(dev->udev, ocp_index, data); + +out1: + return ret; +} + +static int r815x_mdio_read(struct net_device *netdev, int phy_id, int reg) +{ + struct usbnet *dev = netdev_priv(netdev); + + if (phy_id != R815x_PHY_ID) + return -EINVAL; + + return ocp_reg_read(dev, BASE_MII + reg * 2); +} + +static +void r815x_mdio_write(struct net_device *netdev, int phy_id, int reg, int val) +{ + struct usbnet *dev = netdev_priv(netdev); + + if (phy_id != R815x_PHY_ID) + return; + + ocp_reg_write(dev, BASE_MII + reg * 2, val); +} + +static int r8153_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status; + + status = usbnet_cdc_bind(dev, intf); + if (status < 0) + return status; + + dev->mii.dev = dev->net; + dev->mii.mdio_read = r815x_mdio_read; + dev->mii.mdio_write = r815x_mdio_write; + dev->mii.phy_id_mask = 0x3f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = R815x_PHY_ID; + dev->mii.supports_gmii = 1; + + return 0; +} + +static int r8152_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status; + + status = usbnet_cdc_bind(dev, intf); + if (status < 0) + return status; + + dev->mii.dev = dev->net; + dev->mii.mdio_read = r815x_mdio_read; + dev->mii.mdio_write = r815x_mdio_write; + dev->mii.phy_id_mask = 0x3f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = R815x_PHY_ID; + dev->mii.supports_gmii = 0; + + return 0; +} + +static const struct driver_info r8152_info = { + .description = "RTL8152 ECM Device", + .flags = FLAG_ETHER | FLAG_POINTTOPOINT, + .bind = r8152_bind, + .unbind = usbnet_cdc_unbind, + .status = usbnet_cdc_status, + .manage_power = usbnet_manage_power, +}; + +static const struct driver_info r8153_info = { + .description = "RTL8153 ECM Device", + .flags = FLAG_ETHER | FLAG_POINTTOPOINT, + .bind = r8153_bind, + .unbind = usbnet_cdc_unbind, + .status = usbnet_cdc_status, + .manage_power = usbnet_manage_power, +}; + +static const struct usb_device_id products[] = { +{ + USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), +#if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE) + .driver_info = 0, +#else + .driver_info = (unsigned long) &r8152_info, +#endif +}, + +{ + USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM, + USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), +#if defined(CONFIG_USB_RTL8153) || defined(CONFIG_USB_RTL8153_MODULE) + .driver_info = 0, +#else + .driver_info = (unsigned long) &r8153_info, +#endif +}, + + { }, /* END */ +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver r815x_driver = { + .name = "r815x", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .reset_resume = usbnet_resume, + .supports_autosuspend = 1, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(r815x_driver); + +MODULE_AUTHOR("Hayes Wang"); +MODULE_DESCRIPTION("Realtek USB ECM device"); +MODULE_LICENSE("GPL"); |