diff options
Diffstat (limited to 'drivers')
30 files changed, 371 insertions, 352 deletions
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 430673be1df7..7225124d96c2 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -587,7 +587,7 @@ static int it821x_port_start(struct ata_port *ap) itdev->want[1][1] = ATA_ANY; itdev->last_device = -1; - if (pdev->revision == 0x11) { + if (pdev->revision == 0x10) { itdev->timing10 = 1; /* Need to disable ATAPI DMA for this case */ if (!itdev->smart) diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c index cb44cb4f6a47..80bb06105387 100644 --- a/drivers/auxdisplay/cfag12864b.c +++ b/drivers/auxdisplay/cfag12864b.c @@ -355,7 +355,7 @@ static int __init cfag12864b_init(void) cfag12864b_cache = kmalloc(sizeof(unsigned char) * CFAG12864B_SIZE, GFP_KERNEL); - if (cfag12864b_buffer == NULL) { + if (cfag12864b_cache == NULL) { printk(KERN_ERR CFAG12864B_NAME ": ERROR: " "can't alloc cache buffer (%i bytes)\n", CFAG12864B_SIZE); diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index ef32e977d307..4245b7f80a49 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -68,6 +68,7 @@ config AMIGA_Z2RAM config BLK_DEV_XD tristate "XT hard disk support" depends on ISA && ISA_DMA_API + select CHECK_SIGNATURE help Very old 8 bit hard disk controllers used in the IBM XT computer will be supported if you say Y here. diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 96d2f9ee42d6..9b07f7851061 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2292,7 +2292,7 @@ static int __devinit ipmi_of_probe(struct of_device *dev, info->irq = irq_of_parse_and_map(dev->node, 0); info->dev = &dev->dev; - dev_dbg(&dev->dev, "addr 0x%lx regsize %ld spacing %ld irq %x\n", + dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %x\n", info->io.addr_data, info->io.regsize, info->io.regspacing, info->irq); diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 2ce0af1bd588..d95f316afb5a 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -1022,10 +1022,6 @@ static const unsigned short x86_keycodes[256] = 308,310,313,314,315,317,318,319,320,357,322,323,324,325,276,330, 332,340,365,342,343,344,345,346,356,270,341,368,369,370,371,372 }; -#ifdef CONFIG_MAC_EMUMOUSEBTN -extern int mac_hid_mouse_emulate_buttons(int, int, int); -#endif /* CONFIG_MAC_EMUMOUSEBTN */ - #ifdef CONFIG_SPARC static int sparc_l1_a_state = 0; extern void sun_do_break(void); diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index bbb7f1292665..2f97d2f8f916 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -1565,6 +1565,9 @@ static int hdlcdev_open(struct net_device *dev) int rc; unsigned long flags; + if (!try_module_get(THIS_MODULE)) + return -EBUSY; + DBGINFO(("%s hdlcdev_open\n", dev->name)); /* generic HDLC layer open processing */ @@ -1634,6 +1637,7 @@ static int hdlcdev_close(struct net_device *dev) info->netcount=0; spin_unlock_irqrestore(&info->netlock, flags); + module_put(THIS_MODULE); return 0; } diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 9bb542913b86..39564b76d4a3 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -7,7 +7,7 @@ * Reiner Sailer <sailer@watson.ibm.com> * Kylene Hall <kjhall@us.ibm.com> * - * Maintained by: <tpmdd_devel@lists.sourceforge.net> + * Maintained by: <tpmdd-devel@lists.sourceforge.net> * * Device driver for TCG/TCPA TPM (trusted platform module). * Specifications at www.trustedcomputinggroup.org diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index b2e2b002a1bb..d15ccddc92eb 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -7,7 +7,7 @@ * Reiner Sailer <sailer@watson.ibm.com> * Kylene Hall <kjhall@us.ibm.com> * - * Maintained by: <tpmdd_devel@lists.sourceforge.net> + * Maintained by: <tpmdd-devel@lists.sourceforge.net> * * Device driver for TCG/TCPA TPM (trusted platform module). * Specifications at www.trustedcomputinggroup.org diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c index 1ab0896070be..d0e7926eb486 100644 --- a/drivers/char/tpm/tpm_atmel.c +++ b/drivers/char/tpm/tpm_atmel.c @@ -7,7 +7,7 @@ * Reiner Sailer <sailer@watson.ibm.com> * Kylene Hall <kjhall@us.ibm.com> * - * Maintained by: <tpmdd_devel@lists.sourceforge.net> + * Maintained by: <tpmdd-devel@lists.sourceforge.net> * * Device driver for TCG/TCPA TPM (trusted platform module). * Specifications at www.trustedcomputinggroup.org diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h index 9363bcf0a402..6c831f9466b7 100644 --- a/drivers/char/tpm/tpm_atmel.h +++ b/drivers/char/tpm/tpm_atmel.h @@ -4,7 +4,7 @@ * Authors: * Kylene Hall <kjhall@us.ibm.com> * - * Maintained by: <tpmdd_devel@lists.sourceforge.net> + * Maintained by: <tpmdd-devel@lists.sourceforge.net> * * Device driver for TCG/TCPA TPM (trusted platform module). * Specifications at www.trustedcomputinggroup.org diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index 8677fc6a545e..60a2d2630e36 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -7,6 +7,8 @@ * Reiner Sailer <sailer@watson.ibm.com> * Kylene Hall <kjhall@us.ibm.com> * + * Maintained by: <tpmdd-devel@lists.sourceforge.net> + * * Access to the eventlog extended by the TCG BIOS of PC platform * * This program is free software; you can redistribute it and/or diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c index 608f73071bef..6313326bc41f 100644 --- a/drivers/char/tpm/tpm_nsc.c +++ b/drivers/char/tpm/tpm_nsc.c @@ -7,7 +7,7 @@ * Reiner Sailer <sailer@watson.ibm.com> * Kylene Hall <kjhall@us.ibm.com> * - * Maintained by: <tpmdd_devel@lists.sourceforge.net> + * Maintained by: <tpmdd-devel@lists.sourceforge.net> * * Device driver for TCG/TCPA TPM (trusted platform module). * Specifications at www.trustedcomputinggroup.org diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 483f3f60013c..23fa18a6654c 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -5,6 +5,8 @@ * Leendert van Doorn <leendert@watson.ibm.com> * Kylene Hall <kjhall@us.ibm.com> * + * Maintained by: <tpmdd-devel@lists.sourceforge.net> + * * Device driver for TCG/TCPA TPM (trusted platform module). * Specifications at www.trustedcomputinggroup.org * diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 9b26574f1466..d602b8fa7d46 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -68,6 +68,7 @@ config INPUT_WISTRON_BTNS select INPUT_POLLDEV select NEW_LEDS select LEDS_CLASS + select CHECK_SIGNATURE help Say Y here for support of Winstron laptop button interface, used on laptops of various brands, including Acer and Fujitsu-Siemens. If diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig index fd6925f41647..41e2250613a1 100644 --- a/drivers/lguest/Kconfig +++ b/drivers/lguest/Kconfig @@ -1,6 +1,6 @@ config LGUEST tristate "Linux hypervisor example code" - depends on X86 && PARAVIRT && EXPERIMENTAL && !X86_PAE + depends on X86 && PARAVIRT && EXPERIMENTAL && !X86_PAE && FUTEX select LGUEST_GUEST select HVC_DRIVER ---help--- diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c index 76c1e8e4a487..33dee3a773ed 100644 --- a/drivers/macintosh/mac_hid.c +++ b/drivers/macintosh/mac_hid.c @@ -13,6 +13,7 @@ #include <linux/sysctl.h> #include <linux/input.h> #include <linux/module.h> +#include <linux/kbd_kern.h> static struct input_dev *emumousebtn; diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c index dfdf11c1eec4..e2f84da09e7c 100644 --- a/drivers/macintosh/via-pmu68k.c +++ b/drivers/macintosh/via-pmu68k.c @@ -818,243 +818,3 @@ pmu_present(void) { return (pmu_kind != PMU_UNKNOWN); } - -#if 0 /* needs some work for 68K */ - -/* - * This struct is used to store config register values for - * PCI devices which may get powered off when we sleep. - */ -static struct pci_save { - u16 command; - u16 cache_lat; - u16 intr; -} *pbook_pci_saves; -static int n_pbook_pci_saves; - -static inline void -pbook_pci_save(void) -{ - int npci; - struct pci_dev *pd = NULL; - struct pci_save *ps; - - npci = 0; - while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) - ++npci; - n_pbook_pci_saves = npci; - if (npci == 0) - return; - ps = kmalloc(npci * sizeof(*ps), GFP_KERNEL); - pbook_pci_saves = ps; - if (ps == NULL) - return; - - pd = NULL; - while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) { - pci_read_config_word(pd, PCI_COMMAND, &ps->command); - pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat); - pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr); - ++ps; - --npci; - } -} - -static inline void -pbook_pci_restore(void) -{ - u16 cmd; - struct pci_save *ps = pbook_pci_saves; - struct pci_dev *pd = NULL; - int j; - - while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) { - if (ps->command == 0) - continue; - pci_read_config_word(pd, PCI_COMMAND, &cmd); - if ((ps->command & ~cmd) == 0) - continue; - switch (pd->hdr_type) { - case PCI_HEADER_TYPE_NORMAL: - for (j = 0; j < 6; ++j) - pci_write_config_dword(pd, - PCI_BASE_ADDRESS_0 + j*4, - pd->resource[j].start); - pci_write_config_dword(pd, PCI_ROM_ADDRESS, - pd->resource[PCI_ROM_RESOURCE].start); - pci_write_config_word(pd, PCI_CACHE_LINE_SIZE, - ps->cache_lat); - pci_write_config_word(pd, PCI_INTERRUPT_LINE, - ps->intr); - pci_write_config_word(pd, PCI_COMMAND, ps->command); - break; - /* other header types not restored at present */ - } - } -} - -/* - * Put the powerbook to sleep. - */ -#define IRQ_ENABLE ((unsigned int *)0xf3000024) -#define MEM_CTRL ((unsigned int *)0xf8000070) - -int powerbook_sleep(void) -{ - int ret, i, x; - static int save_backlight; - static unsigned int save_irqen; - unsigned long msr; - unsigned int hid0; - unsigned long p, wait; - struct adb_request sleep_req; - - /* Notify device drivers */ - ret = blocking_notifier_call_chain(&sleep_notifier_list, - PBOOK_SLEEP, NULL); - if (ret & NOTIFY_STOP_MASK) - return -EBUSY; - - /* Sync the disks. */ - /* XXX It would be nice to have some way to ensure that - * nobody is dirtying any new buffers while we wait. */ - sys_sync(); - - /* Turn off the display backlight */ - save_backlight = backlight_enabled; - if (save_backlight) - pmu_enable_backlight(0); - - /* Give the disks a little time to actually finish writing */ - for (wait = jiffies + (HZ/4); time_before(jiffies, wait); ) - mb(); - - /* Disable all interrupts except pmu */ - save_irqen = in_le32(IRQ_ENABLE); - for (i = 0; i < 32; ++i) - if (i != vias->intrs[0].line && (save_irqen & (1 << i))) - disable_irq(i); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - - /* Save the state of PCI config space for some slots */ - pbook_pci_save(); - - /* Set the memory controller to keep the memory refreshed - while we're asleep */ - for (i = 0x403f; i >= 0x4000; --i) { - out_be32(MEM_CTRL, i); - do { - x = (in_be32(MEM_CTRL) >> 16) & 0x3ff; - } while (x == 0); - if (x >= 0x100) - break; - } - - /* Ask the PMU to put us to sleep */ - pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T'); - while (!sleep_req.complete) - mb(); - /* displacement-flush the L2 cache - necessary? */ - for (p = KERNELBASE; p < KERNELBASE + 0x100000; p += 0x1000) - i = *(volatile int *)p; - asleep = 1; - - /* Put the CPU into sleep mode */ - asm volatile("mfspr %0,1008" : "=r" (hid0) :); - hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP; - asm volatile("mtspr 1008,%0" : : "r" (hid0)); - local_save_flags(msr); - msr |= MSR_POW | MSR_EE; - local_irq_restore(msr); - udelay(10); - - /* OK, we're awake again, start restoring things */ - out_be32(MEM_CTRL, 0x3f); - pbook_pci_restore(); - - /* wait for the PMU interrupt sequence to complete */ - while (asleep) - mb(); - - /* reenable interrupts */ - for (i = 0; i < 32; ++i) - if (i != vias->intrs[0].line && (save_irqen & (1 << i))) - enable_irq(i); - - /* Notify drivers */ - blocking_notifier_call_chain(&sleep_notifier_list, PBOOK_WAKE, NULL); - - /* reenable ADB autopoll */ - pmu_adb_autopoll(adb_dev_map); - - /* Turn on the screen backlight, if it was on before */ - if (save_backlight) - pmu_enable_backlight(1); - - /* Wait for the hard disk to spin up */ - - return 0; -} - -/* - * Support for /dev/pmu device - */ -static int pmu_open(struct inode *inode, struct file *file) -{ - return 0; -} - -static ssize_t pmu_read(struct file *file, char *buf, - size_t count, loff_t *ppos) -{ - return 0; -} - -static ssize_t pmu_write(struct file *file, const char *buf, - size_t count, loff_t *ppos) -{ - return 0; -} - -static int pmu_ioctl(struct inode * inode, struct file *filp, - u_int cmd, u_long arg) -{ - int error; - __u32 value; - - switch (cmd) { - case PMU_IOC_SLEEP: - return -ENOSYS; - case PMU_IOC_GET_BACKLIGHT: - return put_user(backlight_level, (__u32 *)arg); - case PMU_IOC_SET_BACKLIGHT: - error = get_user(value, (__u32 *)arg); - if (!error) - pmu_set_brightness(value); - return error; - case PMU_IOC_GET_MODEL: - return put_user(pmu_kind, (__u32 *)arg); - } - return -EINVAL; -} - -static const struct file_operations pmu_device_fops = { - .read = pmu_read, - .write = pmu_write, - .ioctl = pmu_ioctl, - .open = pmu_open, -}; - -static struct miscdevice pmu_device = { - PMU_MINOR, "pmu", &pmu_device_fops -}; - -void pmu_device_init(void) -{ - if (!via) - return; - if (misc_register(&pmu_device) < 0) - printk(KERN_ERR "via-pmu68k: cannot register misc device.\n"); -} -#endif /* CONFIG_PMAC_PBOOK */ - diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 650991bddd8e..f33a729960ca 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1972,7 +1972,8 @@ static int run(mddev_t *mddev) !test_bit(In_sync, &disk->rdev->flags)) { disk->head_position = 0; mddev->degraded++; - conf->fullsync = 1; + if (disk->rdev) + conf->fullsync = 1; } } if (mddev->degraded == conf->raid_disks) { @@ -2153,11 +2154,25 @@ static int raid1_reshape(mddev_t *mddev) oldpool = conf->r1bio_pool; conf->r1bio_pool = newpool; - for (d=d2=0; d < conf->raid_disks; d++) - if (conf->mirrors[d].rdev) { - conf->mirrors[d].rdev->raid_disk = d2; - newmirrors[d2++].rdev = conf->mirrors[d].rdev; + for (d = d2 = 0; d < conf->raid_disks; d++) { + mdk_rdev_t *rdev = conf->mirrors[d].rdev; + if (rdev && rdev->raid_disk != d2) { + char nm[20]; + sprintf(nm, "rd%d", rdev->raid_disk); + sysfs_remove_link(&mddev->kobj, nm); + rdev->raid_disk = d2; + sprintf(nm, "rd%d", rdev->raid_disk); + sysfs_remove_link(&mddev->kobj, nm); + if (sysfs_create_link(&mddev->kobj, + &rdev->kobj, nm)) + printk(KERN_WARNING + "md/raid1: cannot register " + "%s for %s\n", + nm, mdname(mddev)); } + if (rdev) + newmirrors[d2++].rdev = rdev; + } kfree(conf->mirrors); conf->mirrors = newmirrors; kfree(conf->poolinfo); diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index 80c4a8463065..1cb33cac1237 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -892,7 +892,7 @@ static int m41t80_remove(struct i2c_client *client) static struct i2c_driver m41t80_driver = { .driver = { - .name = "m41t80", + .name = "rtc-m41t80", }, .probe = m41t80_probe, .remove = m41t80_remove, diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c index d94170728075..3e183cfee10f 100644 --- a/drivers/rtc/rtc-max6902.c +++ b/drivers/rtc/rtc-max6902.c @@ -13,7 +13,7 @@ * * 24-May-2006: Raphael Assenat <raph@8d.com> * - Major rework - * Converted to rtc_device and uses the SPI layer. + * Converted to rtc_device and uses the SPI layer. * * ??-???-2005: Someone at Compulab * - Initial driver creation. @@ -259,11 +259,11 @@ static int __devexit max6902_remove(struct spi_device *spi) static struct spi_driver max6902_driver = { .driver = { - .name = "max6902", + .name = "rtc-max6902", .bus = &spi_bus_type, .owner = THIS_MODULE, }, - .probe = max6902_probe, + .probe = max6902_probe, .remove = __devexit_p(max6902_remove), }; diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index d2b3898b750a..6f2c71ef47ee 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -367,6 +367,7 @@ config SCSI_3W_9XXX config SCSI_7000FASST tristate "7000FASST SCSI support" depends on ISA && SCSI && ISA_DMA_API + select CHECK_SIGNATURE help This driver supports the Western Digital 7000 SCSI host adapter family. Some information is in the source: @@ -388,6 +389,7 @@ config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" depends on ISA && SCSI && !64BIT select SCSI_SPI_ATTRS + select CHECK_SIGNATURE ---help--- This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. @@ -583,6 +585,7 @@ config SCSI_DTC3280 tristate "DTC3180/3280 SCSI support" depends on ISA && SCSI select SCSI_SPI_ATTRS + select CHECK_SIGNATURE help This is support for DTC 3180/3280 SCSI Host Adapters. Please read the SCSI-HOWTO, available from @@ -657,6 +660,7 @@ config SCSI_EATA_PIO config SCSI_FUTURE_DOMAIN tristate "Future Domain 16xx SCSI/AHA-2920A support" depends on (ISA || PCI) && SCSI + select CHECK_SIGNATURE ---help--- This is support for Future Domain's 16-bit SCSI host adapters (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and @@ -1324,6 +1328,7 @@ config SCSI_LPFC config SCSI_SEAGATE tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support" depends on X86 && ISA && SCSI + select CHECK_SIGNATURE ---help--- These are 8-bit SCSI controllers; the ST-01 is also supported by this driver. It is explained in section 3.9 of the SCSI-HOWTO, @@ -1397,6 +1402,7 @@ config SCSI_T128 tristate "Trantor T128/T128F/T228 SCSI support" depends on ISA && SCSI select SCSI_SPI_ATTRS + select CHECK_SIGNATURE ---help--- This is support for a SCSI host adapter. It is explained in section 3.11 of the SCSI-HOWTO, available from @@ -1561,7 +1567,7 @@ config A3000_SCSI built-in SCSI controller, say Y. Otherwise, say N. To compile this driver as a module, choose M here: the - module will be called wd33c93. + module will be called a3000. config A2091_SCSI tristate "A2091/A590 WD33C93A support" @@ -1571,7 +1577,7 @@ config A2091_SCSI say N. To compile this driver as a module, choose M here: the - module will be called wd33c93. + module will be called a2091. config GVP11_SCSI tristate "GVP Series II WD33C93A support" diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 301313002f6b..f94109cbb46e 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -129,7 +129,16 @@ struct uart_8250_port { unsigned char mcr; unsigned char mcr_mask; /* mask of user bits */ unsigned char mcr_force; /* mask of forced bits */ - unsigned char lsr_break_flag; + + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ +#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS + unsigned char lsr_saved_flags; +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + unsigned char msr_saved_flags; /* * We provide a per-port pm hook. @@ -1238,6 +1247,7 @@ static void serial8250_start_tx(struct uart_port *port) if (up->bugs & UART_BUG_TXEN) { unsigned char lsr, iir; lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; iir = serial_in(up, UART_IIR) & 0x0f; if ((up->port.type == PORT_RM9000) ? (lsr & UART_LSR_THRE && @@ -1290,18 +1300,10 @@ receive_chars(struct uart_8250_port *up, unsigned int *status) flag = TTY_NORMAL; up->port.icount.rx++; -#ifdef CONFIG_SERIAL_8250_CONSOLE - /* - * Recover the break flag from console xmit - */ - if (up->port.line == up->port.cons->index) { - lsr |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } -#endif + lsr |= up->lsr_saved_flags; + up->lsr_saved_flags = 0; - if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { + if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { /* * For statistics only */ @@ -1392,6 +1394,8 @@ static unsigned int check_modem_status(struct uart_8250_port *up) { unsigned int status = serial_in(up, UART_MSR); + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && up->port.info != NULL) { if (status & UART_MSR_TERI) @@ -1591,7 +1595,8 @@ static void serial8250_timeout(unsigned long data) static void serial8250_backup_timeout(unsigned long data) { struct uart_8250_port *up = (struct uart_8250_port *)data; - unsigned int iir, ier = 0; + unsigned int iir, ier = 0, lsr; + unsigned long flags; /* * Must disable interrupts or else we risk racing with the interrupt @@ -1610,9 +1615,13 @@ static void serial8250_backup_timeout(unsigned long data) * the "Diva" UART used on the management processor on many HP * ia64 and parisc boxes. */ + spin_lock_irqsave(&up->port.lock, flags); + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + spin_unlock_irqrestore(&up->port.lock, flags); if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) && - (serial_in(up, UART_LSR) & UART_LSR_THRE)) { + (lsr & UART_LSR_THRE)) { iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); iir |= UART_IIR_THRI; } @@ -1631,13 +1640,14 @@ static unsigned int serial8250_tx_empty(struct uart_port *port) { struct uart_8250_port *up = (struct uart_8250_port *)port; unsigned long flags; - unsigned int ret; + unsigned int lsr; spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; spin_unlock_irqrestore(&up->port.lock, flags); - return ret; + return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0; } static unsigned int serial8250_get_mctrl(struct uart_port *port) @@ -1708,8 +1718,7 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) do { status = serial_in(up, UART_LSR); - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; + up->lsr_saved_flags |= status & LSR_SAVE_FLAGS; if (--tmout == 0) break; @@ -1718,8 +1727,12 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) { + unsigned int tmout; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; udelay(1); touch_nmi_watchdog(); } @@ -1889,6 +1902,18 @@ static int serial8250_startup(struct uart_port *port) spin_unlock_irqrestore(&up->port.lock, flags); /* + * Clear the interrupt registers again for luck, and clear the + * saved flags to avoid getting false values from polling + * routines or the previous session. + */ + serial_inp(up, UART_LSR); + serial_inp(up, UART_RX); + serial_inp(up, UART_IIR); + serial_inp(up, UART_MSR); + up->lsr_saved_flags = 0; + up->msr_saved_flags = 0; + + /* * Finally, enable interrupts. Note: Modem status interrupts * are set via set_termios(), which will be occurring imminently * anyway, so we don't enable them here. @@ -1906,14 +1931,6 @@ static int serial8250_startup(struct uart_port *port) (void) inb_p(icp); } - /* - * And clear the interrupt registers again for luck. - */ - (void) serial_inp(up, UART_LSR); - (void) serial_inp(up, UART_RX); - (void) serial_inp(up, UART_IIR); - (void) serial_inp(up, UART_MSR); - return 0; } @@ -2484,6 +2501,16 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) wait_for_xmitr(up, BOTH_EMPTY); serial_out(up, UART_IER, ier); + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + check_modem_status(up); + if (locked) spin_unlock(&up->port.lock); local_irq_restore(flags); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 5e485876f54c..bd66339f7a3f 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -580,6 +580,138 @@ static int pci_netmos_init(struct pci_dev *dev) return num_serial; } +/* + * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com> + * + * These chips are available with optionally one parallel port and up to + * two serial ports. Unfortunately they all have the same product id. + * + * Basic configuration is done over a region of 32 I/O ports. The base + * ioport is called INTA or INTC, depending on docs/other drivers. + * + * The region of the 32 I/O ports is configured in POSIO0R... + */ + +/* registers */ +#define ITE_887x_MISCR 0x9c +#define ITE_887x_INTCBAR 0x78 +#define ITE_887x_UARTBAR 0x7c +#define ITE_887x_PS0BAR 0x10 +#define ITE_887x_POSIO0 0x60 + +/* I/O space size */ +#define ITE_887x_IOSIZE 32 +/* I/O space size (bits 26-24; 8 bytes = 011b) */ +#define ITE_887x_POSIO_IOSIZE_8 (3 << 24) +/* I/O space size (bits 26-24; 32 bytes = 101b) */ +#define ITE_887x_POSIO_IOSIZE_32 (5 << 24) +/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ +#define ITE_887x_POSIO_SPEED (3 << 29) +/* enable IO_Space bit */ +#define ITE_887x_POSIO_ENABLE (1 << 31) + +static int __devinit pci_ite887x_init(struct pci_dev *dev) +{ + /* inta_addr are the configuration addresses of the ITE */ + static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, + 0x200, 0x280, 0 }; + int ret, i, type; + struct resource *iobase = NULL; + u32 miscr, uartbar, ioport; + + /* search for the base-ioport */ + i = 0; + while (inta_addr[i] && iobase == NULL) { + iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, + "ite887x"); + if (iobase != NULL) { + /* write POSIO0R - speed | size | ioport */ + pci_write_config_dword(dev, ITE_887x_POSIO0, + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); + /* write INTCBAR - ioport */ + pci_write_config_dword(dev, ITE_887x_INTCBAR, inta_addr[i]); + ret = inb(inta_addr[i]); + if (ret != 0xff) { + /* ioport connected */ + break; + } + release_region(iobase->start, ITE_887x_IOSIZE); + iobase = NULL; + } + i++; + } + + if (!inta_addr[i]) { + printk(KERN_ERR "ite887x: could not find iobase\n"); + return -ENODEV; + } + + /* start of undocumented type checking (see parport_pc.c) */ + type = inb(iobase->start + 0x18) & 0x0f; + + switch (type) { + case 0x2: /* ITE8871 (1P) */ + case 0xa: /* ITE8875 (1P) */ + ret = 0; + break; + case 0xe: /* ITE8872 (2S1P) */ + ret = 2; + break; + case 0x6: /* ITE8873 (1S) */ + ret = 1; + break; + case 0x8: /* ITE8874 (2S) */ + ret = 2; + break; + default: + moan_device("Unknown ITE887x", dev); + ret = -ENODEV; + } + + /* configure all serial ports */ + for (i = 0; i < ret; i++) { + /* read the I/O port from the device */ + pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), + &ioport); + ioport &= 0x0000FF00; /* the actual base address */ + pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_8 | ioport); + + /* write the ioport to the UARTBAR */ + pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); + uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ + uartbar |= (ioport << (16 * i)); /* set the ioport */ + pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); + + /* get current config */ + pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); + /* disable interrupts (UARTx_Routing[3:0]) */ + miscr &= ~(0xf << (12 - 4 * i)); + /* activate the UART (UARTx_En) */ + miscr |= 1 << (23 - i); + /* write new config with activated UART */ + pci_write_config_dword(dev, ITE_887x_MISCR, miscr); + } + + if (ret <= 0) { + /* the device has no UARTs if we get here */ + release_region(iobase->start, ITE_887x_IOSIZE); + } + + return ret; +} + +static void __devexit pci_ite887x_exit(struct pci_dev *dev) +{ + u32 ioport; + /* the ioport is bit 0-15 in POSIO0R */ + pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); + ioport &= 0xffff; + release_region(ioport, ITE_887x_IOSIZE); +} + static int pci_default_setup(struct serial_private *priv, struct pciserial_board *board, struct uart_port *port, int idx) @@ -653,6 +785,18 @@ static struct pci_serial_quirk pci_serial_quirks[] = { .setup = pci_default_setup, }, /* + * ITE + */ + { + .vendor = PCI_VENDOR_ID_ITE, + .device = PCI_DEVICE_ID_ITE_8872, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ite887x_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ite887x_exit), + }, + /* * Panacom */ { @@ -933,6 +1077,7 @@ enum pci_board_num_t { pbn_b1_2_1250000, + pbn_b1_bt_1_115200, pbn_b1_bt_2_921600, pbn_b1_1_1382400, @@ -983,6 +1128,7 @@ enum pci_board_num_t { pbn_exar_XR17C152, pbn_exar_XR17C154, pbn_exar_XR17C158, + pbn_pasemi_1682M, }; /* @@ -1211,6 +1357,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .uart_offset = 8, }, + [pbn_b1_bt_1_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_2_921600] = { .flags = FL_BASE1|FL_BASE_BARS, .num_ports = 2, @@ -1498,6 +1651,18 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 921600, .uart_offset = 0x200, }, + /* + * PA Semi PWRficient PA6T-1682M on-chip UART + */ + [pbn_pasemi_1682M] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 8333333, + }, +}; + +static const struct pci_device_id softmodem_blacklist[] = { + { PCI_VDEVICE ( AL, 0x5457 ), }, /* ALi Corporation M5457 AC'97 Modem */ }; /* @@ -1508,6 +1673,7 @@ static struct pciserial_board pci_boards[] __devinitdata = { static int __devinit serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) { + const struct pci_device_id *blacklist; int num_iomem, num_port, first_port = -1, i; /* @@ -1522,6 +1688,18 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) (dev->class & 0xff) > 6) return -ENODEV; + /* + * Do not access blacklisted devices that are known not to + * feature serial ports. + */ + for (blacklist = softmodem_blacklist; + blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist); + blacklist++) { + if (dev->vendor == blacklist->vendor && + dev->device == blacklist->device) + return -ENODEV; + } + num_iomem = num_port = 0; for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { if (pci_resource_flags(dev, i) & IORESOURCE_IO) { @@ -2364,6 +2542,13 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_1_115200 }, + /* + * ITE + */ + { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b1_bt_1_115200 }, /* * IntaShield IS-200 @@ -2382,6 +2567,13 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, 0, 0, pbn_b2_8_921600 }, /* + * PA Semi PA6T-1682M on-chip UART + */ + { PCI_VENDOR_ID_PASEMI, 0xa004, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pasemi_1682M }, + + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL */ diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 030a6063541d..a055f58f342f 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1146,11 +1146,14 @@ static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termio /* * These are the bits that are used to setup various - * flags in the low level driver. + * flags in the low level driver. We can ignore the Bfoo + * bits in c_cflag; c_[io]speed will always be set + * appropriately by set_termios() in tty_ioctl.c */ #define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - if ((cflag ^ old_termios->c_cflag) == 0 && + tty->termios->c_ospeed == old_termios->c_ospeed && + tty->termios->c_ispeed == old_termios->c_ispeed && RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) return; diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index b8f91e018b21..0930e2a85514 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -37,7 +37,7 @@ #include <asm/io.h> -static char *serial_version = "1.09"; +static char *serial_version = "1.10"; static char *serial_name = "TX39/49 Serial driver"; #define PASS_LIMIT 256 @@ -436,8 +436,10 @@ static unsigned int serial_txx9_get_mctrl(struct uart_port *port) struct uart_txx9_port *up = (struct uart_txx9_port *)port; unsigned int ret; - ret = ((sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS) - | ((sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS); + /* no modem control lines */ + ret = TIOCM_CAR | TIOCM_DSR; + ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS; + ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS; return ret; } @@ -557,6 +559,12 @@ serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long flags; unsigned int baud, quot; + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CMSPAR); + termios->c_cflag |= CLOCAL; + cval = sio_in(up, TXX9_SILCR); /* byte size and parity */ cval &= ~TXX9_SILCR_UMODE_MASK; diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index 80a81eccad36..832e4613673a 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -115,6 +115,52 @@ static int nocursor = 0; module_param(nocursor, int, 0644); MODULE_PARM_DESC(nocursor, "cursor enable/disable"); +/* fb_blank + * Blank the screen. Depending on the mode, the screen will be + * activated with the backlight color, or desactivated + */ +static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi) +{ + struct au1100fb_device *fbdev = to_au1100fb_device(fbi); + + print_dbg("fb_blank %d %p", blank_mode, fbi); + + switch (blank_mode) { + + case VESA_NO_BLANKING: + /* Turn on panel */ + fbdev->regs->lcd_control |= LCD_CONTROL_GO; +#ifdef CONFIG_MIPS_PB1100 + if (drv_info.panel_idx == 1) { + au_writew(au_readw(PB1100_G_CONTROL) + | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD), + PB1100_G_CONTROL); + } +#endif + au_sync(); + break; + + case VESA_VSYNC_SUSPEND: + case VESA_HSYNC_SUSPEND: + case VESA_POWERDOWN: + /* Turn off panel */ + fbdev->regs->lcd_control &= ~LCD_CONTROL_GO; +#ifdef CONFIG_MIPS_PB1100 + if (drv_info.panel_idx == 1) { + au_writew(au_readw(PB1100_G_CONTROL) + & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD), + PB1100_G_CONTROL); + } +#endif + au_sync(); + break; + default: + break; + + } + return 0; +} + /* * Set hardware with var settings. This will enable the controller with a specific * mode, normally validated with the fb_check_var method @@ -272,52 +318,6 @@ int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned return 0; } -/* fb_blank - * Blank the screen. Depending on the mode, the screen will be - * activated with the backlight color, or desactivated - */ -int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi) -{ - struct au1100fb_device *fbdev = to_au1100fb_device(fbi); - - print_dbg("fb_blank %d %p", blank_mode, fbi); - - switch (blank_mode) { - - case VESA_NO_BLANKING: - /* Turn on panel */ - fbdev->regs->lcd_control |= LCD_CONTROL_GO; -#ifdef CONFIG_MIPS_PB1100 - if (drv_info.panel_idx == 1) { - au_writew(au_readw(PB1100_G_CONTROL) - | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD), - PB1100_G_CONTROL); - } -#endif - au_sync(); - break; - - case VESA_VSYNC_SUSPEND: - case VESA_HSYNC_SUSPEND: - case VESA_POWERDOWN: - /* Turn off panel */ - fbdev->regs->lcd_control &= ~LCD_CONTROL_GO; -#ifdef CONFIG_MIPS_PB1100 - if (drv_info.panel_idx == 1) { - au_writew(au_readw(PB1100_G_CONTROL) - & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD), - PB1100_G_CONTROL); - } -#endif - au_sync(); - break; - default: - break; - - } - return 0; -} - /* fb_pan_display * Pan display in x and/or y as specified */ diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c index 7fa1afeae8dc..dda0586ab3f3 100644 --- a/drivers/video/console/newport_con.c +++ b/drivers/video/console/newport_con.c @@ -738,9 +738,8 @@ const struct consw newport_con = { #ifdef MODULE static int __init newport_console_init(void) { - if (!sgi_gfxaddr) - return NULL; + return 0; if (!npregs) npregs = (struct newport_regs *)/* ioremap cannot fail */ diff --git a/drivers/video/imsttfb.c b/drivers/video/imsttfb.c index 5715b8ad0ddc..94f4511023d8 100644 --- a/drivers/video/imsttfb.c +++ b/drivers/video/imsttfb.c @@ -1391,7 +1391,7 @@ init_imstt(struct fb_info *info) } } -#if USE_NV_MODES && defined(CONFIG_PPC) +#if USE_NV_MODES && defined(CONFIG_PPC32) { int vmode = init_vmode, cmode = init_cmode; diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c index 2fbd8dd16df5..6840dfebe4d4 100644 --- a/drivers/w1/w1_int.c +++ b/drivers/w1/w1_int.c @@ -170,22 +170,24 @@ void __w1_remove_master_device(struct w1_master *dev) void w1_remove_master_device(struct w1_bus_master *bm) { - struct w1_master *dev = NULL; + struct w1_master *dev, *found = NULL; list_for_each_entry(dev, &w1_masters, w1_master_entry) { if (!dev->initialized) continue; - if (dev->bus_master->data == bm->data) + if (dev->bus_master->data == bm->data) { + found = dev; break; + } } - if (!dev) { + if (!found) { printk(KERN_ERR "Device doesn't exist.\n"); return; } - __w1_remove_master_device(dev); + __w1_remove_master_device(found); } EXPORT_SYMBOL(w1_add_master_device); diff --git a/drivers/zorro/zorro-sysfs.c b/drivers/zorro/zorro-sysfs.c index 9130f1c12c26..808b4f8675c5 100644 --- a/drivers/zorro/zorro-sysfs.c +++ b/drivers/zorro/zorro-sysfs.c @@ -78,7 +78,7 @@ static ssize_t zorro_read_config(struct kobject *kobj, static struct bin_attribute zorro_config_attr = { .attr = { .name = "config", - .mode = S_IRUGO | S_IWUSR, + .mode = S_IRUGO, }, .size = sizeof(struct ConfigDev), .read = zorro_read_config, |