diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/gpu/drm/panel/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-samsung-s6d27a1.c | 320 |
3 files changed, 332 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index beb581b96ecd..0b3784941312 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -392,6 +392,17 @@ config DRM_PANEL_SAMSUNG_S6D16D0 depends on DRM_MIPI_DSI select VIDEOMODE_HELPERS +config DRM_PANEL_SAMSUNG_S6D27A1 + tristate "Samsung S6D27A1 DPI panel driver" + depends on OF && SPI && GPIOLIB + select DRM_MIPI_DBI + help + Say Y here if you want to enable support for the Samsung + S6D27A1 DPI 480x800 panel. + + This panel can be found in Samsung Galaxy Ace 2 + GT-I8160 mobile phone. + config DRM_PANEL_SAMSUNG_S6E3HA2 tristate "Samsung S6E3HA2 DSI video mode panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index c8132050bcec..60c0149fc54a 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20) += panel-samsung-atna33xc20.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D27A1) += panel-samsung-s6d27a1.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o diff --git a/drivers/gpu/drm/panel/panel-samsung-s6d27a1.c b/drivers/gpu/drm/panel/panel-samsung-s6d27a1.c new file mode 100644 index 000000000000..1696ceb36aa0 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-samsung-s6d27a1.c @@ -0,0 +1,320 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Panel driver for the Samsung S6D27A1 480x800 DPI RGB panel. + * Found in the Samsung Galaxy Ace 2 GT-I8160 mobile phone. + */ + +#include <drm/drm_mipi_dbi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include <video/mipi_display.h> + +#define S6D27A1_PASSWD_L2 0xF0 /* Password Command for Level 2 Control */ +#define S6D27A1_RESCTL 0xB3 /* Resolution Select Control */ +#define S6D27A1_PANELCTL2 0xB4 /* ASG Signal Control */ +#define S6D27A1_READID1 0xDA /* Read panel ID 1 */ +#define S6D27A1_READID2 0xDB /* Read panel ID 2 */ +#define S6D27A1_READID3 0xDC /* Read panel ID 3 */ +#define S6D27A1_DISPCTL 0xF2 /* Display Control */ +#define S6D27A1_MANPWR 0xF3 /* Manual Control */ +#define S6D27A1_PWRCTL1 0xF4 /* Power Control */ +#define S6D27A1_SRCCTL 0xF6 /* Source Control */ +#define S6D27A1_PANELCTL 0xF7 /* Panel Control*/ + +static const u8 s6d27a1_dbi_read_commands[] = { + S6D27A1_READID1, + S6D27A1_READID2, + S6D27A1_READID3, + 0, /* sentinel */ +}; + +struct s6d27a1 { + struct device *dev; + struct mipi_dbi dbi; + struct drm_panel panel; + struct gpio_desc *reset; + struct regulator_bulk_data regulators[2]; +}; + +static const struct drm_display_mode s6d27a1_480_800_mode = { + /* + * The vendor driver states that the S6D27A1 panel + * has a pixel clock frequency of 49920000 Hz / 2 = 24960000 Hz. + */ + .clock = 24960, + .hdisplay = 480, + .hsync_start = 480 + 63, + .hsync_end = 480 + 63 + 2, + .htotal = 480 + 63 + 2 + 63, + .vdisplay = 800, + .vsync_start = 800 + 11, + .vsync_end = 800 + 11 + 2, + .vtotal = 800 + 11 + 2 + 10, + .width_mm = 50, + .height_mm = 84, + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, +}; + +static inline struct s6d27a1 *to_s6d27a1(struct drm_panel *panel) +{ + return container_of(panel, struct s6d27a1, panel); +} + +static void s6d27a1_read_mtp_id(struct s6d27a1 *ctx) +{ + struct mipi_dbi *dbi = &ctx->dbi; + u8 id1, id2, id3; + int ret; + + ret = mipi_dbi_command_read(dbi, S6D27A1_READID1, &id1); + if (ret) { + dev_err(ctx->dev, "unable to read MTP ID 1\n"); + return; + } + ret = mipi_dbi_command_read(dbi, S6D27A1_READID2, &id2); + if (ret) { + dev_err(ctx->dev, "unable to read MTP ID 2\n"); + return; + } + ret = mipi_dbi_command_read(dbi, S6D27A1_READID3, &id3); + if (ret) { + dev_err(ctx->dev, "unable to read MTP ID 3\n"); + return; + } + dev_info(ctx->dev, "MTP ID: %02x %02x %02x\n", id1, id2, id3); +} + +static int s6d27a1_power_on(struct s6d27a1 *ctx) +{ + struct mipi_dbi *dbi = &ctx->dbi; + int ret; + + /* Power up */ + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->regulators), + ctx->regulators); + if (ret) { + dev_err(ctx->dev, "failed to enable regulators: %d\n", ret); + return ret; + } + + msleep(20); + + /* Assert reset >=1 ms */ + gpiod_set_value_cansleep(ctx->reset, 1); + usleep_range(1000, 5000); + /* De-assert reset */ + gpiod_set_value_cansleep(ctx->reset, 0); + /* Wait >= 10 ms */ + msleep(20); + + /* + * Exit sleep mode and initialize display - some hammering is + * necessary. + */ + mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); + mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(120); + + /* Magic to unlock level 2 control of the display */ + mipi_dbi_command(dbi, S6D27A1_PASSWD_L2, 0x5A, 0x5A); + + /* Configure resolution to 480RGBx800 */ + mipi_dbi_command(dbi, S6D27A1_RESCTL, 0x22); + + mipi_dbi_command(dbi, S6D27A1_PANELCTL2, 0x00, 0x02, 0x03, 0x04, 0x05, 0x08, 0x00, 0x0c); + + mipi_dbi_command(dbi, S6D27A1_MANPWR, 0x01, 0x00, 0x00, 0x08, 0x08, 0x02, 0x00); + + mipi_dbi_command(dbi, S6D27A1_DISPCTL, 0x19, 0x00, 0x08, 0x0D, 0x03, 0x41, 0x3F); + + mipi_dbi_command(dbi, S6D27A1_PWRCTL1, 0x00, 0x00, 0x00, 0x00, 0x55, + 0x44, 0x05, 0x88, 0x4B, 0x50); + + mipi_dbi_command(dbi, S6D27A1_SRCCTL, 0x03, 0x09, 0x8A, 0x00, 0x01, 0x16); + + mipi_dbi_command(dbi, S6D27A1_PANELCTL, 0x00, 0x05, 0x06, 0x07, 0x08, + 0x01, 0x09, 0x0D, 0x0A, 0x0E, + 0x0B, 0x0F, 0x0C, 0x10, 0x01, + 0x11, 0x12, 0x13, 0x14, 0x05, + 0x06, 0x07, 0x08, 0x01, 0x09, + 0x0D, 0x0A, 0x0E, 0x0B, 0x0F, + 0x0C, 0x10, 0x01, 0x11, 0x12, + 0x13, 0x14); + + /* lock the level 2 control */ + mipi_dbi_command(dbi, S6D27A1_PASSWD_L2, 0xA5, 0xA5); + + s6d27a1_read_mtp_id(ctx); + + return 0; +} + +static int s6d27a1_power_off(struct s6d27a1 *ctx) +{ + /* Go into RESET and disable regulators */ + gpiod_set_value_cansleep(ctx->reset, 1); + return regulator_bulk_disable(ARRAY_SIZE(ctx->regulators), + ctx->regulators); +} + +static int s6d27a1_unprepare(struct drm_panel *panel) +{ + struct s6d27a1 *ctx = to_s6d27a1(panel); + struct mipi_dbi *dbi = &ctx->dbi; + + mipi_dbi_command(dbi, MIPI_DCS_ENTER_SLEEP_MODE); + msleep(120); + return s6d27a1_power_off(to_s6d27a1(panel)); +} + +static int s6d27a1_disable(struct drm_panel *panel) +{ + struct s6d27a1 *ctx = to_s6d27a1(panel); + struct mipi_dbi *dbi = &ctx->dbi; + + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); + msleep(25); + + return 0; +} + +static int s6d27a1_prepare(struct drm_panel *panel) +{ + return s6d27a1_power_on(to_s6d27a1(panel)); +} + +static int s6d27a1_enable(struct drm_panel *panel) +{ + struct s6d27a1 *ctx = to_s6d27a1(panel); + struct mipi_dbi *dbi = &ctx->dbi; + + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); + + return 0; +} + +static int s6d27a1_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct s6d27a1 *ctx = to_s6d27a1(panel); + struct drm_display_mode *mode; + static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; + + mode = drm_mode_duplicate(connector->dev, &s6d27a1_480_800_mode); + if (!mode) { + dev_err(ctx->dev, "failed to add mode\n"); + return -ENOMEM; + } + + connector->display_info.bpc = 8; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + connector->display_info.bus_flags = + DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE; + drm_display_info_set_bus_formats(&connector->display_info, + &bus_format, 1); + + drm_mode_set_name(mode); + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + + drm_mode_probed_add(connector, mode); + + return 1; +} + +static const struct drm_panel_funcs s6d27a1_drm_funcs = { + .disable = s6d27a1_disable, + .unprepare = s6d27a1_unprepare, + .prepare = s6d27a1_prepare, + .enable = s6d27a1_enable, + .get_modes = s6d27a1_get_modes, +}; + +static int s6d27a1_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct s6d27a1 *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->dev = dev; + + /* + * VCI is the analog voltage supply + * VCCIO is the digital I/O voltage supply + */ + ctx->regulators[0].supply = "vci"; + ctx->regulators[1].supply = "vccio"; + ret = devm_regulator_bulk_get(dev, + ARRAY_SIZE(ctx->regulators), + ctx->regulators); + if (ret) + return dev_err_probe(dev, ret, "failed to get regulators\n"); + + ctx->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->reset)) { + ret = PTR_ERR(ctx->reset); + return dev_err_probe(dev, ret, "no RESET GPIO\n"); + } + + ret = mipi_dbi_spi_init(spi, &ctx->dbi, NULL); + if (ret) + return dev_err_probe(dev, ret, "MIPI DBI init failed\n"); + + ctx->dbi.read_commands = s6d27a1_dbi_read_commands; + + drm_panel_init(&ctx->panel, dev, &s6d27a1_drm_funcs, + DRM_MODE_CONNECTOR_DPI); + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return dev_err_probe(dev, ret, "failed to add backlight\n"); + + spi_set_drvdata(spi, ctx); + + drm_panel_add(&ctx->panel); + + return 0; +} + +static int s6d27a1_remove(struct spi_device *spi) +{ + struct s6d27a1 *ctx = spi_get_drvdata(spi); + + drm_panel_remove(&ctx->panel); + return 0; +} + +static const struct of_device_id s6d27a1_match[] = { + { .compatible = "samsung,s6d27a1", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, s6d27a1_match); + +static struct spi_driver s6d27a1_driver = { + .probe = s6d27a1_probe, + .remove = s6d27a1_remove, + .driver = { + .name = "s6d27a1-panel", + .of_match_table = s6d27a1_match, + }, +}; +module_spi_driver(s6d27a1_driver); + +MODULE_AUTHOR("Markuss Broks <markuss.broks@gmail.com>"); +MODULE_DESCRIPTION("Samsung S6D27A1 panel driver"); +MODULE_LICENSE("GPL v2"); |