diff options
Diffstat (limited to 'include/drm/drm_connector.h')
| -rw-r--r-- | include/drm/drm_connector.h | 54 |
1 files changed, 52 insertions, 2 deletions
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 5971577016a2..ed38df4ac204 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -177,6 +177,35 @@ enum drm_link_status { }; /** + * enum drm_panel_orientation - panel_orientation info for &drm_display_info + * + * This enum is used to track the (LCD) panel orientation. There are no + * separate #defines for the uapi! + * + * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any + * panel orientation information (normal + * for non panels) in this case the "panel + * orientation" connector prop will not be + * attached. + * @DRM_MODE_PANEL_ORIENTATION_NORMAL: The top side of the panel matches the + * top side of the device's casing. + * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the + * bottom side of the device's casing, iow + * the panel is mounted upside-down. + * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP: The left side of the panel matches the + * top side of the device's casing. + * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the + * top side of the device's casing. + */ +enum drm_panel_orientation { + DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1, + DRM_MODE_PANEL_ORIENTATION_NORMAL = 0, + DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, + DRM_MODE_PANEL_ORIENTATION_LEFT_UP, + DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, +}; + +/** * struct drm_display_info - runtime data about the connected sink * * Describes a given display (e.g. CRT or flat panel) and its limitations. For @@ -224,6 +253,15 @@ struct drm_display_info { #define DRM_COLOR_FORMAT_YCRCB420 (1<<3) /** + * @panel_orientation: Read only connector property for built-in panels, + * indicating the orientation of the panel vs the device's casing. + * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN. + * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the + * fb to compensate and gets exported as prop to userspace. + */ + int panel_orientation; + + /** * @color_formats: HDMI Color formats, selects between RGB and YCrCb * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones * as used to describe the pixel format in framebuffers, and also don't @@ -271,6 +309,11 @@ struct drm_display_info { bool dvi_dual; /** + * @has_hdmi_infoframe: Does the sink support the HDMI infoframe? + */ + bool has_hdmi_infoframe; + + /** * @edid_hdmi_dc_modes: Mask of supported hdmi deep color modes. Even * more stuff redundant with @bus_formats. */ @@ -705,7 +748,6 @@ struct drm_cmdline_mode { * @force: a DRM_FORCE_<foo> state for forced mode sets * @override_edid: has the EDID been overwritten through debugfs for testing? * @encoder_ids: valid encoders for this connector - * @encoder: encoder driving this connector, if any * @eld: EDID-like data, if present * @latency_present: AV delay info from ELD, if found * @video_latency: video latency info from ELD, if found @@ -875,7 +917,13 @@ struct drm_connector { #define DRM_CONNECTOR_MAX_ENCODER 3 uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; - struct drm_encoder *encoder; /* currently active encoder */ + /** + * @encoder: Currently bound encoder driving this connector, if any. + * Only really meaningful for non-atomic drivers. Atomic drivers should + * instead look at &drm_connector_state.best_encoder, and in case they + * need the CRTC driving this output, &drm_connector_state.crtc. + */ + struct drm_encoder *encoder; #define MAX_ELD_BYTES 128 /* EDID bits */ @@ -1035,6 +1083,8 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector, const struct edid *edid); void drm_mode_connector_set_link_status_property(struct drm_connector *connector, uint64_t link_status); +int drm_connector_init_panel_orientation_property( + struct drm_connector *connector, int width, int height); /** * struct drm_tile_group - Tile group metadata |