diff options
Diffstat (limited to 'include/drm/drm_dp_helper.h')
| -rw-r--r-- | include/drm/drm_dp_helper.h | 176 |
1 files changed, 171 insertions, 5 deletions
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 7e25030a6aa2..523f04c90dea 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -42,6 +42,8 @@ * 1.2 formally includes both eDP and DPI definitions. */ +#define DP_AUX_MAX_PAYLOAD_BYTES 16 + #define DP_AUX_I2C_WRITE 0x0 #define DP_AUX_I2C_READ 0x1 #define DP_AUX_I2C_STATUS 0x2 @@ -92,6 +94,15 @@ # define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */ # define DP_OUI_SUPPORT (1 << 7) +#define DP_RECEIVE_PORT_0_CAP_0 0x008 +# define DP_LOCAL_EDID_PRESENT (1 << 1) +# define DP_ASSOCIATED_TO_PRECEDING_PORT (1 << 2) + +#define DP_RECEIVE_PORT_0_BUFFER_SIZE 0x009 + +#define DP_RECEIVE_PORT_1_CAP_0 0x00a +#define DP_RECEIVE_PORT_1_BUFFER_SIZE 0x00b + #define DP_I2C_SPEED_CAP 0x00c /* DPI */ # define DP_I2C_SPEED_1K 0x01 # define DP_I2C_SPEED_5K 0x02 @@ -101,8 +112,19 @@ # define DP_I2C_SPEED_1M 0x20 #define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */ +# define DP_ALTERNATE_SCRAMBLER_RESET_CAP (1 << 0) +# define DP_FRAMING_CHANGE_CAP (1 << 1) +# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */ + #define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */ +#define DP_ADAPTER_CAP 0x00f /* 1.2 */ +# define DP_FORCE_LOAD_SENSE_CAP (1 << 0) +# define DP_ALTERNATE_I2C_PATTERN_CAP (1 << 1) + +#define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */ +# define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */ + /* Multiple stream transport */ #define DP_FAUX_CAP 0x020 /* 1.2 */ # define DP_FAUX_CAP_1 (1 << 0) @@ -110,10 +132,56 @@ #define DP_MSTM_CAP 0x021 /* 1.2 */ # define DP_MST_CAP (1 << 0) +#define DP_NUMBER_OF_AUDIO_ENDPOINTS 0x022 /* 1.2 */ + +/* AV_SYNC_DATA_BLOCK 1.2 */ +#define DP_AV_GRANULARITY 0x023 +# define DP_AG_FACTOR_MASK (0xf << 0) +# define DP_AG_FACTOR_3MS (0 << 0) +# define DP_AG_FACTOR_2MS (1 << 0) +# define DP_AG_FACTOR_1MS (2 << 0) +# define DP_AG_FACTOR_500US (3 << 0) +# define DP_AG_FACTOR_200US (4 << 0) +# define DP_AG_FACTOR_100US (5 << 0) +# define DP_AG_FACTOR_10US (6 << 0) +# define DP_AG_FACTOR_1US (7 << 0) +# define DP_VG_FACTOR_MASK (0xf << 4) +# define DP_VG_FACTOR_3MS (0 << 4) +# define DP_VG_FACTOR_2MS (1 << 4) +# define DP_VG_FACTOR_1MS (2 << 4) +# define DP_VG_FACTOR_500US (3 << 4) +# define DP_VG_FACTOR_200US (4 << 4) +# define DP_VG_FACTOR_100US (5 << 4) + +#define DP_AUD_DEC_LAT0 0x024 +#define DP_AUD_DEC_LAT1 0x025 + +#define DP_AUD_PP_LAT0 0x026 +#define DP_AUD_PP_LAT1 0x027 + +#define DP_VID_INTER_LAT 0x028 + +#define DP_VID_PROG_LAT 0x029 + +#define DP_REP_LAT 0x02a + +#define DP_AUD_DEL_INS0 0x02b +#define DP_AUD_DEL_INS1 0x02c +#define DP_AUD_DEL_INS2 0x02d +/* End of AV_SYNC_DATA_BLOCK */ + +#define DP_RECEIVER_ALPM_CAP 0x02e /* eDP 1.4 */ +# define DP_ALPM_CAP (1 << 0) + +#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP 0x02f /* eDP 1.4 */ +# define DP_AUX_FRAME_SYNC_CAP (1 << 0) + #define DP_GUID 0x030 /* 1.2 */ #define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */ # define DP_PSR_IS_SUPPORTED 1 +# define DP_PSR2_IS_SUPPORTED 2 /* eDP 1.4 */ + #define DP_PSR_CAPS 0x071 /* XXX 1.2? */ # define DP_PSR_NO_TRAIN_ON_EXIT 1 # define DP_PSR_SETUP_TIME_330 (0 << 1) @@ -153,6 +221,7 @@ /* link configuration */ #define DP_LINK_BW_SET 0x100 +# define DP_LINK_RATE_TABLE 0x00 /* eDP 1.4 */ # define DP_LINK_BW_1_62 0x06 # define DP_LINK_BW_2_7 0x0a # define DP_LINK_BW_5_4 0x14 /* 1.2 */ @@ -168,11 +237,12 @@ # define DP_TRAINING_PATTERN_3 3 /* 1.2 */ # define DP_TRAINING_PATTERN_MASK 0x3 -# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2) -# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2) -# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2) -# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2) -# define DP_LINK_QUAL_PATTERN_MASK (3 << 2) +/* DPCD 1.1 only. For DPCD >= 1.2 see per-lane DP_LINK_QUAL_LANEn_SET */ +# define DP_LINK_QUAL_PATTERN_11_DISABLE (0 << 2) +# define DP_LINK_QUAL_PATTERN_11_D10_2 (1 << 2) +# define DP_LINK_QUAL_PATTERN_11_ERROR_RATE (2 << 2) +# define DP_LINK_QUAL_PATTERN_11_PRBS7 (3 << 2) +# define DP_LINK_QUAL_PATTERN_11_MASK (3 << 2) # define DP_RECOVERED_CLOCK_OUT_EN (1 << 4) # define DP_LINK_SCRAMBLING_DISABLE (1 << 5) @@ -215,17 +285,63 @@ /* bitmask as for DP_I2C_SPEED_CAP */ #define DP_EDP_CONFIGURATION_SET 0x10a /* XXX 1.2? */ +# define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE (1 << 0) +# define DP_FRAMING_CHANGE_ENABLE (1 << 1) +# define DP_PANEL_SELF_TEST_ENABLE (1 << 7) + +#define DP_LINK_QUAL_LANE0_SET 0x10b /* DPCD >= 1.2 */ +#define DP_LINK_QUAL_LANE1_SET 0x10c +#define DP_LINK_QUAL_LANE2_SET 0x10d +#define DP_LINK_QUAL_LANE3_SET 0x10e +# define DP_LINK_QUAL_PATTERN_DISABLE 0 +# define DP_LINK_QUAL_PATTERN_D10_2 1 +# define DP_LINK_QUAL_PATTERN_ERROR_RATE 2 +# define DP_LINK_QUAL_PATTERN_PRBS7 3 +# define DP_LINK_QUAL_PATTERN_80BIT_CUSTOM 4 +# define DP_LINK_QUAL_PATTERN_HBR2_EYE 5 +# define DP_LINK_QUAL_PATTERN_MASK 7 + +#define DP_TRAINING_LANE0_1_SET2 0x10f +#define DP_TRAINING_LANE2_3_SET2 0x110 +# define DP_LANE02_POST_CURSOR2_SET_MASK (3 << 0) +# define DP_LANE02_MAX_POST_CURSOR2_REACHED (1 << 2) +# define DP_LANE13_POST_CURSOR2_SET_MASK (3 << 4) +# define DP_LANE13_MAX_POST_CURSOR2_REACHED (1 << 6) #define DP_MSTM_CTRL 0x111 /* 1.2 */ # define DP_MST_EN (1 << 0) # define DP_UP_REQ_EN (1 << 1) # define DP_UPSTREAM_IS_SRC (1 << 2) +#define DP_AUDIO_DELAY0 0x112 /* 1.2 */ +#define DP_AUDIO_DELAY1 0x113 +#define DP_AUDIO_DELAY2 0x114 + +#define DP_LINK_RATE_SET 0x115 /* eDP 1.4 */ +# define DP_LINK_RATE_SET_SHIFT 0 +# define DP_LINK_RATE_SET_MASK (7 << 0) + +#define DP_RECEIVER_ALPM_CONFIG 0x116 /* eDP 1.4 */ +# define DP_ALPM_ENABLE (1 << 0) +# define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE (1 << 1) + +#define DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF 0x117 /* eDP 1.4 */ +# define DP_AUX_FRAME_SYNC_ENABLE (1 << 0) +# define DP_IRQ_HPD_ENABLE (1 << 1) + +#define DP_UPSTREAM_DEVICE_DP_PWR_NEED 0x118 /* 1.2 */ +# define DP_PWR_NOT_NEEDED (1 << 0) + +#define DP_AUX_FRAME_SYNC_VALUE 0x15c /* eDP 1.4 */ +# define DP_AUX_FRAME_SYNC_VALID (1 << 0) + #define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */ # define DP_PSR_ENABLE (1 << 0) # define DP_PSR_MAIN_LINK_ACTIVE (1 << 1) # define DP_PSR_CRC_VERIFICATION (1 << 2) # define DP_PSR_FRAME_CAPTURE (1 << 3) +# define DP_PSR_SELECTIVE_UPDATE (1 << 4) +# define DP_PSR_IRQ_HPD_WITH_CRC_ERRORS (1 << 5) #define DP_ADAPTER_CTRL 0x1a0 # define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE (1 << 0) @@ -332,6 +448,49 @@ # define DP_SET_POWER_D3 0x2 # define DP_SET_POWER_MASK 0x3 +#define DP_EDP_DPCD_REV 0x700 /* eDP 1.2 */ +# define DP_EDP_11 0x00 +# define DP_EDP_12 0x01 +# define DP_EDP_13 0x02 +# define DP_EDP_14 0x03 + +#define DP_EDP_GENERAL_CAP_1 0x701 + +#define DP_EDP_BACKLIGHT_ADJUSTMENT_CAP 0x702 + +#define DP_EDP_GENERAL_CAP_2 0x703 + +#define DP_EDP_GENERAL_CAP_3 0x704 /* eDP 1.4 */ + +#define DP_EDP_DISPLAY_CONTROL_REGISTER 0x720 + +#define DP_EDP_BACKLIGHT_MODE_SET_REGISTER 0x721 + +#define DP_EDP_BACKLIGHT_BRIGHTNESS_MSB 0x722 +#define DP_EDP_BACKLIGHT_BRIGHTNESS_LSB 0x723 + +#define DP_EDP_PWMGEN_BIT_COUNT 0x724 +#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN 0x725 +#define DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX 0x726 + +#define DP_EDP_BACKLIGHT_CONTROL_STATUS 0x727 + +#define DP_EDP_BACKLIGHT_FREQ_SET 0x728 + +#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MSB 0x72a +#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MID 0x72b +#define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_LSB 0x72c + +#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MSB 0x72d +#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_MID 0x72e +#define DP_EDP_BACKLIGHT_FREQ_CAP_MAX_LSB 0x72f + +#define DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET 0x732 +#define DP_EDP_DBC_MAXIMUM_BRIGHTNESS_SET 0x733 + +#define DP_EDP_REGIONAL_BACKLIGHT_BASE 0x740 /* eDP 1.4 */ +#define DP_EDP_REGIONAL_BACKLIGHT_0 0x741 /* eDP 1.4 */ + #define DP_SIDEBAND_MSG_DOWN_REQ_BASE 0x1000 /* 1.2 MST */ #define DP_SIDEBAND_MSG_UP_REP_BASE 0x1200 /* 1.2 MST */ #define DP_SIDEBAND_MSG_DOWN_REP_BASE 0x1400 /* 1.2 MST */ @@ -350,6 +509,7 @@ #define DP_PSR_ERROR_STATUS 0x2006 /* XXX 1.2? */ # define DP_PSR_LINK_CRC_ERROR (1 << 0) # define DP_PSR_RFB_STORAGE_ERROR (1 << 1) +# define DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR (1 << 2) /* eDP 1.4 */ #define DP_PSR_ESI 0x2007 /* XXX 1.2? */ # define DP_PSR_CAPS_CHANGE (1 << 0) @@ -363,6 +523,9 @@ # define DP_PSR_SINK_INTERNAL_ERROR 7 # define DP_PSR_SINK_STATE_MASK 0x07 +#define DP_RECEIVER_ALPM_STATUS 0x200b /* eDP 1.4 */ +# define DP_ALPM_LOCK_TIMEOUT_ERROR (1 << 0) + /* DP 1.2 Sideband message defines */ /* peer device type - DP 1.2a Table 2-92 */ #define DP_PEER_DEVICE_NONE 0x0 @@ -519,6 +682,9 @@ struct drm_dp_aux_msg { * transactions. The drm_dp_aux_register_i2c_bus() function registers an * I2C adapter that can be passed to drm_probe_ddc(). Upon removal, drivers * should call drm_dp_aux_unregister_i2c_bus() to remove the I2C adapter. + * The I2C adapter uses long transfers by default; if a partial response is + * received, the adapter will drop down to the size given by the partial + * response for this transaction only. * * Note that the aux helper code assumes that the .transfer() function * only modifies the reply field of the drm_dp_aux_msg structure. The |