diff options
Diffstat (limited to 'include/linux/mfd/cros_ec_commands.h')
| -rw-r--r-- | include/linux/mfd/cros_ec_commands.h | 229 |
1 files changed, 225 insertions, 4 deletions
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index f2edd9969b40..6e1ab9bead28 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -804,6 +804,8 @@ enum ec_feature_code { EC_FEATURE_MOTION_SENSE_FIFO = 24, /* EC has RTC feature that can be controlled by host commands */ EC_FEATURE_RTC = 27, + /* EC supports CEC commands */ + EC_FEATURE_CEC = 35, }; #define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32)) @@ -2078,6 +2080,12 @@ enum ec_mkbp_event { /* EC sent a sysrq command */ EC_MKBP_EVENT_SYSRQ = 6, + /* Notify the AP that something happened on CEC */ + EC_MKBP_EVENT_CEC_EVENT = 8, + + /* Send an incoming CEC message to the AP */ + EC_MKBP_EVENT_CEC_MESSAGE = 9, + /* Number of MKBP events */ EC_MKBP_EVENT_COUNT, }; @@ -2093,12 +2101,28 @@ union ec_response_get_next_data { uint32_t sysrq; } __packed; +union ec_response_get_next_data_v1 { + uint8_t key_matrix[16]; + uint32_t host_event; + uint32_t buttons; + uint32_t switches; + uint32_t sysrq; + uint32_t cec_events; + uint8_t cec_message[16]; +} __packed; + struct ec_response_get_next_event { uint8_t event_type; /* Followed by event data if any */ union ec_response_get_next_data data; } __packed; +struct ec_response_get_next_event_v1 { + uint8_t event_type; + /* Followed by event data if any */ + union ec_response_get_next_data_v1 data; +} __packed; + /* Bit indices for buttons and switches.*/ /* Buttons */ #define EC_MKBP_POWER_BUTTON 0 @@ -2593,14 +2617,18 @@ struct ec_params_current_limit { } __packed; /* - * Set maximum external power current. + * Set maximum external voltage / current. */ -#define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2 +#define EC_CMD_EXTERNAL_POWER_LIMIT 0x00A2 -struct ec_params_ext_power_current_limit { - uint32_t limit; /* in mA */ +/* Command v0 is used only on Spring and is obsolete + unsupported */ +struct ec_params_external_power_limit_v1 { + uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */ + uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */ } __packed; +#define EC_POWER_LIMIT_NONE 0xffff + /* Inform the EC when entering a sleep state */ #define EC_CMD_HOST_SLEEP_EVENT 0xa9 @@ -2831,6 +2859,79 @@ struct ec_params_reboot_ec { /*****************************************************************************/ /* + * HDMI CEC commands + * + * These commands are for sending and receiving message via HDMI CEC + */ +#define EC_MAX_CEC_MSG_LEN 16 + +/* CEC message from the AP to be written on the CEC bus */ +#define EC_CMD_CEC_WRITE_MSG 0x00B8 + +/** + * struct ec_params_cec_write - Message to write to the CEC bus + * @msg: message content to write to the CEC bus + */ +struct ec_params_cec_write { + uint8_t msg[EC_MAX_CEC_MSG_LEN]; +} __packed; + +/* Set various CEC parameters */ +#define EC_CMD_CEC_SET 0x00BA + +/** + * struct ec_params_cec_set - CEC parameters set + * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC + * or 1 to enable CEC functionality, in case cmd is CEC_CMD_LOGICAL_ADDRESS, + * this field encodes the requested logical address between 0 and 15 + * or 0xff to unregister + */ +struct ec_params_cec_set { + uint8_t cmd; /* enum cec_command */ + uint8_t val; +} __packed; + +/* Read various CEC parameters */ +#define EC_CMD_CEC_GET 0x00BB + +/** + * struct ec_params_cec_get - CEC parameters get + * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + */ +struct ec_params_cec_get { + uint8_t cmd; /* enum cec_command */ +} __packed; + +/** + * struct ec_response_cec_get - CEC parameters get response + * @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is + * disabled or 1 if CEC functionality is enabled, + * in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the + * configured logical address between 0 and 15 or 0xff if unregistered + */ +struct ec_response_cec_get { + uint8_t val; +} __packed; + +/* CEC parameters command */ +enum ec_cec_command { + /* CEC reading, writing and events enable */ + CEC_CMD_ENABLE, + /* CEC logical address */ + CEC_CMD_LOGICAL_ADDRESS, +}; + +/* Events from CEC to AP */ +enum mkbp_cec_event { + /* Outgoing message was acknowledged by a follower */ + EC_MKBP_CEC_SEND_OK = BIT(0), + /* Outgoing message was not acknowledged */ + EC_MKBP_CEC_SEND_FAILED = BIT(1), +}; + +/*****************************************************************************/ +/* * Special commands * * These do not follow the normal rules for commands. See each command for @@ -2974,6 +3075,12 @@ enum usb_chg_type { USB_CHG_TYPE_VBUS, USB_CHG_TYPE_UNKNOWN, }; +enum usb_power_roles { + USB_PD_PORT_POWER_DISCONNECTED, + USB_PD_PORT_POWER_SOURCE, + USB_PD_PORT_POWER_SINK, + USB_PD_PORT_POWER_SINK_NOT_CHARGING, +}; struct usb_chg_measures { uint16_t voltage_max; @@ -2991,6 +3098,120 @@ struct ec_response_usb_pd_power_info { uint32_t max_power; } __packed; +struct ec_params_usb_pd_info_request { + uint8_t port; +} __packed; + +/* Read USB-PD Device discovery info */ +#define EC_CMD_USB_PD_DISCOVERY 0x0113 +struct ec_params_usb_pd_discovery_entry { + uint16_t vid; /* USB-IF VID */ + uint16_t pid; /* USB-IF PID */ + uint8_t ptype; /* product type (hub,periph,cable,ama) */ +} __packed; + +/* Override default charge behavior */ +#define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114 + +/* Negative port parameters have special meaning */ +enum usb_pd_override_ports { + OVERRIDE_DONT_CHARGE = -2, + OVERRIDE_OFF = -1, + /* [0, CONFIG_USB_PD_PORT_COUNT): Port# */ +}; + +struct ec_params_charge_port_override { + int16_t override_port; /* Override port# */ +} __packed; + +/* Read (and delete) one entry of PD event log */ +#define EC_CMD_PD_GET_LOG_ENTRY 0x0115 + +struct ec_response_pd_log { + uint32_t timestamp; /* relative timestamp in milliseconds */ + uint8_t type; /* event type : see PD_EVENT_xx below */ + uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */ + uint16_t data; /* type-defined data payload */ + uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */ +} __packed; + +/* The timestamp is the microsecond counter shifted to get about a ms. */ +#define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */ + +#define PD_LOG_SIZE_MASK 0x1f +#define PD_LOG_PORT_MASK 0xe0 +#define PD_LOG_PORT_SHIFT 5 +#define PD_LOG_PORT_SIZE(port, size) (((port) << PD_LOG_PORT_SHIFT) | \ + ((size) & PD_LOG_SIZE_MASK)) +#define PD_LOG_PORT(size_port) ((size_port) >> PD_LOG_PORT_SHIFT) +#define PD_LOG_SIZE(size_port) ((size_port) & PD_LOG_SIZE_MASK) + +/* PD event log : entry types */ +/* PD MCU events */ +#define PD_EVENT_MCU_BASE 0x00 +#define PD_EVENT_MCU_CHARGE (PD_EVENT_MCU_BASE+0) +#define PD_EVENT_MCU_CONNECT (PD_EVENT_MCU_BASE+1) +/* Reserved for custom board event */ +#define PD_EVENT_MCU_BOARD_CUSTOM (PD_EVENT_MCU_BASE+2) +/* PD generic accessory events */ +#define PD_EVENT_ACC_BASE 0x20 +#define PD_EVENT_ACC_RW_FAIL (PD_EVENT_ACC_BASE+0) +#define PD_EVENT_ACC_RW_ERASE (PD_EVENT_ACC_BASE+1) +/* PD power supply events */ +#define PD_EVENT_PS_BASE 0x40 +#define PD_EVENT_PS_FAULT (PD_EVENT_PS_BASE+0) +/* PD video dongles events */ +#define PD_EVENT_VIDEO_BASE 0x60 +#define PD_EVENT_VIDEO_DP_MODE (PD_EVENT_VIDEO_BASE+0) +#define PD_EVENT_VIDEO_CODEC (PD_EVENT_VIDEO_BASE+1) +/* Returned in the "type" field, when there is no entry available */ +#define PD_EVENT_NO_ENTRY 0xff + +/* + * PD_EVENT_MCU_CHARGE event definition : + * the payload is "struct usb_chg_measures" + * the data field contains the port state flags as defined below : + */ +/* Port partner is a dual role device */ +#define CHARGE_FLAGS_DUAL_ROLE BIT(15) +/* Port is the pending override port */ +#define CHARGE_FLAGS_DELAYED_OVERRIDE BIT(14) +/* Port is the override port */ +#define CHARGE_FLAGS_OVERRIDE BIT(13) +/* Charger type */ +#define CHARGE_FLAGS_TYPE_SHIFT 3 +#define CHARGE_FLAGS_TYPE_MASK (0xf << CHARGE_FLAGS_TYPE_SHIFT) +/* Power delivery role */ +#define CHARGE_FLAGS_ROLE_MASK (7 << 0) + +/* + * PD_EVENT_PS_FAULT data field flags definition : + */ +#define PS_FAULT_OCP 1 +#define PS_FAULT_FAST_OCP 2 +#define PS_FAULT_OVP 3 +#define PS_FAULT_DISCH 4 + +/* + * PD_EVENT_VIDEO_CODEC payload is "struct mcdp_info". + */ +struct mcdp_version { + uint8_t major; + uint8_t minor; + uint16_t build; +} __packed; + +struct mcdp_info { + uint8_t family[2]; + uint8_t chipid[2]; + struct mcdp_version irom; + struct mcdp_version fw; +} __packed; + +/* struct mcdp_info field decoding */ +#define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1]) +#define MCDP_FAMILY(family) ((family[0] << 8) | family[1]) + /* Get info about USB-C SS muxes */ #define EC_CMD_USB_PD_MUX_INFO 0x11a |