diff options
Diffstat (limited to 'include/linux/mmc/mmc.h')
| -rw-r--r-- | include/linux/mmc/mmc.h | 39 |
1 files changed, 33 insertions, 6 deletions
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index e3ed9b95040e..4236fbf0b6fb 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -27,7 +27,7 @@ /* Standard MMC commands (4.1) type argument response */ /* class 1 */ -#define MMC_GO_IDLE_STATE 0 /* bc */ +#define MMC_GO_IDLE_STATE 0 /* bc */ #define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */ #define MMC_ALL_SEND_CID 2 /* bcr R2 */ #define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ @@ -39,8 +39,10 @@ #define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */ #define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */ #define MMC_STOP_TRANSMISSION 12 /* ac R1b */ -#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */ +#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */ #define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */ +#define MMC_SPI_READ_OCR 58 /* spi spi_R3 */ +#define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */ /* class 2 */ #define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */ @@ -90,15 +92,15 @@ */ /* - MMC status in R1 + MMC status in R1, for native mode (SPI bits are different) Type - e : error bit + e : error bit s : status bit r : detected and set for the actual command response x : detected and set during command execution. the host must poll the card by sending status command in order to read these bits. Clear condition - a : according to the card state + a : according to the card state b : always related to the previous command. Reception of a valid command will clear it (with a delay of one command) c : clear by read @@ -124,10 +126,33 @@ #define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */ #define R1_ERASE_RESET (1 << 13) /* sr, c */ #define R1_STATUS(x) (x & 0xFFFFE000) -#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ +#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ #define R1_READY_FOR_DATA (1 << 8) /* sx, a */ #define R1_APP_CMD (1 << 5) /* sr, c */ +/* + * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS + * R1 is the low order byte; R2 is the next highest byte, when present. + */ +#define R1_SPI_IDLE (1 << 0) +#define R1_SPI_ERASE_RESET (1 << 1) +#define R1_SPI_ILLEGAL_COMMAND (1 << 2) +#define R1_SPI_COM_CRC (1 << 3) +#define R1_SPI_ERASE_SEQ (1 << 4) +#define R1_SPI_ADDRESS (1 << 5) +#define R1_SPI_PARAMETER (1 << 6) +/* R1 bit 7 is always zero */ +#define R2_SPI_CARD_LOCKED (1 << 8) +#define R2_SPI_WP_ERASE_SKIP (1 << 9) /* or lock/unlock fail */ +#define R2_SPI_LOCK_UNLOCK_FAIL R2_SPI_WP_ERASE_SKIP +#define R2_SPI_ERROR (1 << 10) +#define R2_SPI_CC_ERROR (1 << 11) +#define R2_SPI_CARD_ECC_ERROR (1 << 12) +#define R2_SPI_WP_VIOLATION (1 << 13) +#define R2_SPI_ERASE_PARAM (1 << 14) +#define R2_SPI_OUT_OF_RANGE (1 << 15) /* or CSD overwrite */ +#define R2_SPI_CSD_OVERWRITE R2_SPI_OUT_OF_RANGE + /* These are unpacked versions of the actual responses */ struct _mmc_csd { @@ -182,6 +207,7 @@ struct _mmc_csd { */ #define CCC_BASIC (1<<0) /* (0) Basic protocol functions */ /* (CMD0,1,2,3,4,7,9,10,12,13,15) */ + /* (and for SPI, CMD58,59) */ #define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */ /* (CMD11) */ #define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */ @@ -227,6 +253,7 @@ struct _mmc_csd { #define EXT_CSD_BUS_WIDTH 183 /* R/W */ #define EXT_CSD_HS_TIMING 185 /* R/W */ #define EXT_CSD_CARD_TYPE 196 /* RO */ +#define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ /* |