diff options
Diffstat (limited to 'include/linux/mtd')
| -rw-r--r-- | include/linux/mtd/mtd.h | 8 | ||||
| -rw-r--r-- | include/linux/mtd/rawnand.h | 126 | ||||
| -rw-r--r-- | include/linux/mtd/spi-nor.h | 1 | ||||
| -rw-r--r-- | include/linux/mtd/spinand.h | 421 |
4 files changed, 504 insertions, 52 deletions
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index a86c4fa93115..cd0be91bdefa 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -67,9 +67,11 @@ struct mtd_erase_region_info { * @datbuf: data buffer - if NULL only oob data are read/written * @oobbuf: oob data buffer * - * Note, it is allowed to read more than one OOB area at one go, but not write. - * The interface assumes that the OOB write requests program only one page's - * OOB area. + * Note, some MTD drivers do not allow you to write more than one OOB area at + * one go. If you try to do that on such an MTD device, -EINVAL will be + * returned. If you want to make your implementation portable on all kind of MTD + * devices you should split the write request into several sub-requests when the + * request crosses a page boundary. */ struct mtd_oob_ops { unsigned int mode; diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 3e8ec3b8a39c..efb2345359bb 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -21,11 +21,10 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/flashchip.h> #include <linux/mtd/bbm.h> +#include <linux/of.h> #include <linux/types.h> -struct mtd_info; struct nand_flash_dev; -struct device_node; /* Scan and identify a NAND device */ int nand_scan_with_ids(struct mtd_info *mtd, int max_chips, @@ -36,17 +35,6 @@ static inline int nand_scan(struct mtd_info *mtd, int max_chips) return nand_scan_with_ids(mtd, max_chips, NULL); } -/* - * Separate phases of nand_scan(), allowing board driver to intervene - * and override command or ECC setup according to flash type. - */ -int nand_scan_ident(struct mtd_info *mtd, int max_chips, - struct nand_flash_dev *table); -int nand_scan_tail(struct mtd_info *mtd); - -/* Unregister the MTD device and free resources held by the NAND device */ -void nand_release(struct mtd_info *mtd); - /* Internal helper for board drivers which need to override command function */ void nand_wait_ready(struct mtd_info *mtd); @@ -121,6 +109,7 @@ enum nand_ecc_algo { NAND_ECC_UNKNOWN, NAND_ECC_HAMMING, NAND_ECC_BCH, + NAND_ECC_RS, }; /* @@ -218,6 +207,12 @@ enum nand_ecc_algo { */ #define NAND_WAIT_TCCS 0x00200000 +/* + * Whether the NAND chip is a boot medium. Drivers might use this information + * to select ECC algorithms supported by the boot ROM or similar restrictions. + */ +#define NAND_IS_BOOT_MEDIUM 0x00400000 + /* Options set by nand scan */ /* Nand scan has allocated controller struct */ #define NAND_CONTROLLER_ALLOC 0x80000000 @@ -230,6 +225,17 @@ enum nand_ecc_algo { /* Keep gcc happy */ struct nand_chip; +/* ONFI version bits */ +#define ONFI_VERSION_1_0 BIT(1) +#define ONFI_VERSION_2_0 BIT(2) +#define ONFI_VERSION_2_1 BIT(3) +#define ONFI_VERSION_2_2 BIT(4) +#define ONFI_VERSION_2_3 BIT(5) +#define ONFI_VERSION_3_0 BIT(6) +#define ONFI_VERSION_3_1 BIT(7) +#define ONFI_VERSION_3_2 BIT(8) +#define ONFI_VERSION_4_0 BIT(9) + /* ONFI features */ #define ONFI_FEATURE_16_BIT_BUS (1 << 0) #define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7) @@ -470,13 +476,13 @@ struct onfi_params { */ struct nand_parameters { /* Generic parameters */ - char model[100]; + const char *model; bool supports_set_get_features; DECLARE_BITMAP(set_feature_list, ONFI_FEATURE_NUMBER); DECLARE_BITMAP(get_feature_list, ONFI_FEATURE_NUMBER); /* ONFI parameters */ - struct onfi_params onfi; + struct onfi_params *onfi; }; /* The maximum expected count of bytes in the NAND ID sequence */ @@ -493,20 +499,42 @@ struct nand_id { }; /** - * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices + * struct nand_controller_ops - Controller operations + * + * @attach_chip: this method is called after the NAND detection phase after + * flash ID and MTD fields such as erase size, page size and OOB + * size have been set up. ECC requirements are available if + * provided by the NAND chip or device tree. Typically used to + * choose the appropriate ECC configuration and allocate + * associated resources. + * This hook is optional. + * @detach_chip: free all resources allocated/claimed in + * nand_controller_ops->attach_chip(). + * This hook is optional. + */ +struct nand_controller_ops { + int (*attach_chip)(struct nand_chip *chip); + void (*detach_chip)(struct nand_chip *chip); +}; + +/** + * struct nand_controller - Structure used to describe a NAND controller + * * @lock: protection lock * @active: the mtd device which holds the controller currently * @wq: wait queue to sleep on if a NAND operation is in * progress used instead of the per chip wait queue * when a hw controller is available. + * @ops: NAND controller operations. */ -struct nand_hw_control { +struct nand_controller { spinlock_t lock; struct nand_chip *active; wait_queue_head_t wq; + const struct nand_controller_ops *ops; }; -static inline void nand_hw_control_init(struct nand_hw_control *nfc) +static inline void nand_controller_init(struct nand_controller *nfc) { nfc->active = NULL; spin_lock_init(&nfc->lock); @@ -778,11 +806,15 @@ nand_get_sdr_timings(const struct nand_data_interface *conf) * implementation) if any. * @cleanup: the ->init() function may have allocated resources, ->cleanup() * is here to let vendor specific code release those resources. + * @fixup_onfi_param_page: apply vendor specific fixups to the ONFI parameter + * page. This is called after the checksum is verified. */ struct nand_manufacturer_ops { void (*detect)(struct nand_chip *chip); int (*init)(struct nand_chip *chip); void (*cleanup)(struct nand_chip *chip); + void (*fixup_onfi_param_page)(struct nand_chip *chip, + struct nand_onfi_params *p); }; /** @@ -986,14 +1018,14 @@ struct nand_subop { unsigned int last_instr_end_off; }; -int nand_subop_get_addr_start_off(const struct nand_subop *subop, - unsigned int op_id); -int nand_subop_get_num_addr_cyc(const struct nand_subop *subop, - unsigned int op_id); -int nand_subop_get_data_start_off(const struct nand_subop *subop, - unsigned int op_id); -int nand_subop_get_data_len(const struct nand_subop *subop, - unsigned int op_id); +unsigned int nand_subop_get_addr_start_off(const struct nand_subop *subop, + unsigned int op_id); +unsigned int nand_subop_get_num_addr_cyc(const struct nand_subop *subop, + unsigned int op_id); +unsigned int nand_subop_get_data_start_off(const struct nand_subop *subop, + unsigned int op_id); +unsigned int nand_subop_get_data_len(const struct nand_subop *subop, + unsigned int op_id); /** * struct nand_op_parser_addr_constraints - Constraints for address instructions @@ -1176,9 +1208,9 @@ int nand_op_parser_exec_op(struct nand_chip *chip, * setting the read-retry mode. Mostly needed for MLC NAND. * @ecc: [BOARDSPECIFIC] ECC control structure * @buf_align: minimum buffer alignment required by a platform - * @hwcontrol: platform-specific hardware control structure + * @dummy_controller: dummy controller implementation for drivers that can + * only control a single chip * @erase: [REPLACEABLE] erase function - * @scan_bbt: [REPLACEABLE] function to scan bad block table * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring * data from array to read regs (tR). * @state: [INTERN] the current state of the NAND device @@ -1271,7 +1303,6 @@ struct nand_chip { const struct nand_operation *op, bool check_only); int (*erase)(struct mtd_info *mtd, int page); - int (*scan_bbt)(struct mtd_info *mtd); int (*set_features)(struct mtd_info *mtd, struct nand_chip *chip, int feature_addr, uint8_t *subfeature_para); int (*get_features)(struct mtd_info *mtd, struct nand_chip *chip, @@ -1314,11 +1345,11 @@ struct nand_chip { flstate_t state; uint8_t *oob_poi; - struct nand_hw_control *controller; + struct nand_controller *controller; struct nand_ecc_ctrl ecc; unsigned long buf_align; - struct nand_hw_control hwcontrol; + struct nand_controller dummy_controller; uint8_t *bbt; struct nand_bbt_descr *bbt_td; @@ -1517,14 +1548,12 @@ extern const struct nand_manufacturer_ops micron_nand_manuf_ops; extern const struct nand_manufacturer_ops amd_nand_manuf_ops; extern const struct nand_manufacturer_ops macronix_nand_manuf_ops; -int nand_default_bbt(struct mtd_info *mtd); +int nand_create_bbt(struct nand_chip *chip); int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs); int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt); int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, int allowbbt); -int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, uint8_t *buf); /** * struct platform_nand_chip - chip level device structure @@ -1555,14 +1584,12 @@ struct platform_device; * struct platform_nand_ctrl - controller level device structure * @probe: platform specific function to probe/setup hardware * @remove: platform specific function to remove/teardown hardware - * @hwcontrol: platform specific hardware control structure * @dev_ready: platform specific function to read ready/busy pin * @select_chip: platform specific chip select function * @cmd_ctrl: platform specific function for controlling * ALE/CLE/nCE. Also used to write command and address * @write_buf: platform specific function for write buffer * @read_buf: platform specific function for read buffer - * @read_byte: platform specific function to read one byte from chip * @priv: private data to transport driver specific settings * * All fields are optional and depend on the hardware driver requirements @@ -1570,13 +1597,11 @@ struct platform_device; struct platform_nand_ctrl { int (*probe)(struct platform_device *pdev); void (*remove)(struct platform_device *pdev); - void (*hwcontrol)(struct mtd_info *mtd, int cmd); int (*dev_ready)(struct mtd_info *mtd); void (*select_chip)(struct mtd_info *mtd, int chip); void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); - unsigned char (*read_byte)(struct mtd_info *mtd); void *priv; }; @@ -1593,10 +1618,10 @@ struct platform_nand_data { /* return the supported asynchronous timing mode. */ static inline int onfi_get_async_timing_mode(struct nand_chip *chip) { - if (!chip->parameters.onfi.version) + if (!chip->parameters.onfi) return ONFI_TIMING_MODE_UNKNOWN; - return chip->parameters.onfi.async_timing_mode; + return chip->parameters.onfi->async_timing_mode; } int onfi_fill_data_interface(struct nand_chip *chip, @@ -1641,14 +1666,8 @@ int nand_check_erased_ecc_chunk(void *data, int datalen, void *extraoob, int extraooblen, int threshold); -int nand_check_ecc_caps(struct nand_chip *chip, - const struct nand_ecc_caps *caps, int oobavail); - -int nand_match_ecc_req(struct nand_chip *chip, - const struct nand_ecc_caps *caps, int oobavail); - -int nand_maximize_ecc(struct nand_chip *chip, - const struct nand_ecc_caps *caps, int oobavail); +int nand_ecc_choose_conf(struct nand_chip *chip, + const struct nand_ecc_caps *caps, int oobavail); /* Default write_oob implementation */ int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page); @@ -1674,10 +1693,14 @@ int nand_get_set_features_notsupp(struct mtd_info *mtd, struct nand_chip *chip, /* Default read_page_raw implementation */ int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page); +int nand_read_page_raw_notsupp(struct mtd_info *mtd, struct nand_chip *chip, + u8 *buf, int oob_required, int page); /* Default write_page_raw implementation */ int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required, int page); +int nand_write_page_raw_notsupp(struct mtd_info *mtd, struct nand_chip *chip, + const u8 *buf, int oob_required, int page); /* Reset and initialize a NAND device */ int nand_reset(struct nand_chip *chip, int chipnr); @@ -1711,8 +1734,13 @@ int nand_read_data_op(struct nand_chip *chip, void *buf, unsigned int len, int nand_write_data_op(struct nand_chip *chip, const void *buf, unsigned int len, bool force_8bit); -/* Free resources held by the NAND device */ +/* + * Free resources held by the NAND device, must be called on error after a + * sucessful nand_scan(). + */ void nand_cleanup(struct nand_chip *chip); +/* Unregister the MTD device and calls nand_cleanup() */ +void nand_release(struct mtd_info *mtd); /* Default extended ID decoding function */ void nand_decode_ext_id(struct nand_chip *chip); diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index e60da0d34cc1..c922e97f205a 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -235,6 +235,7 @@ enum spi_nor_option_flags { SNOR_F_S3AN_ADDR_DEFAULT = BIT(3), SNOR_F_READY_XSR_RDY = BIT(4), SNOR_F_USE_CLSR = BIT(5), + SNOR_F_BROKEN_RESET = BIT(6), }; /** diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h new file mode 100644 index 000000000000..088ff96c3eb6 --- /dev/null +++ b/include/linux/mtd/spinand.h @@ -0,0 +1,421 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2016-2017 Micron Technology, Inc. + * + * Authors: + * Peter Pan <peterpandong@micron.com> + */ +#ifndef __LINUX_MTD_SPINAND_H +#define __LINUX_MTD_SPINAND_H + +#include <linux/mutex.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> + +/** + * Standard SPI NAND flash operations + */ + +#define SPINAND_RESET_OP \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xff, 1), \ + SPI_MEM_OP_NO_ADDR, \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_NO_DATA) + +#define SPINAND_WR_EN_DIS_OP(enable) \ + SPI_MEM_OP(SPI_MEM_OP_CMD((enable) ? 0x06 : 0x04, 1), \ + SPI_MEM_OP_NO_ADDR, \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_NO_DATA) + +#define SPINAND_READID_OP(ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x9f, 1), \ + SPI_MEM_OP_NO_ADDR, \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 1)) + +#define SPINAND_SET_FEATURE_OP(reg, valptr) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x1f, 1), \ + SPI_MEM_OP_ADDR(1, reg, 1), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_DATA_OUT(1, valptr, 1)) + +#define SPINAND_GET_FEATURE_OP(reg, valptr) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x0f, 1), \ + SPI_MEM_OP_ADDR(1, reg, 1), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_DATA_IN(1, valptr, 1)) + +#define SPINAND_BLK_ERASE_OP(addr) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xd8, 1), \ + SPI_MEM_OP_ADDR(3, addr, 1), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_NO_DATA) + +#define SPINAND_PAGE_READ_OP(addr) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x13, 1), \ + SPI_MEM_OP_ADDR(3, addr, 1), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_NO_DATA) + +#define SPINAND_PAGE_READ_FROM_CACHE_OP(fast, addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1), \ + SPI_MEM_OP_ADDR(2, addr, 1), \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 1)) + +#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \ + SPI_MEM_OP_ADDR(2, addr, 1), \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 2)) + +#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \ + SPI_MEM_OP_ADDR(2, addr, 1), \ + SPI_MEM_OP_DUMMY(ndummy, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 4)) + +#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \ + SPI_MEM_OP_ADDR(2, addr, 2), \ + SPI_MEM_OP_DUMMY(ndummy, 2), \ + SPI_MEM_OP_DATA_IN(len, buf, 2)) + +#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \ + SPI_MEM_OP_ADDR(2, addr, 4), \ + SPI_MEM_OP_DUMMY(ndummy, 4), \ + SPI_MEM_OP_DATA_IN(len, buf, 4)) + +#define SPINAND_PROG_EXEC_OP(addr) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1), \ + SPI_MEM_OP_ADDR(3, addr, 1), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_NO_DATA) + +#define SPINAND_PROG_LOAD(reset, addr, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x02 : 0x84, 1), \ + SPI_MEM_OP_ADDR(2, addr, 1), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_DATA_OUT(len, buf, 1)) + +#define SPINAND_PROG_LOAD_X4(reset, addr, buf, len) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x32 : 0x34, 1), \ + SPI_MEM_OP_ADDR(2, addr, 1), \ + SPI_MEM_OP_NO_DUMMY, \ + SPI_MEM_OP_DATA_OUT(len, buf, 4)) + +/** + * Standard SPI NAND flash commands + */ +#define SPINAND_CMD_PROG_LOAD_X4 0x32 +#define SPINAND_CMD_PROG_LOAD_RDM_DATA_X4 0x34 + +/* feature register */ +#define REG_BLOCK_LOCK 0xa0 +#define BL_ALL_UNLOCKED 0x00 + +/* configuration register */ +#define REG_CFG 0xb0 +#define CFG_OTP_ENABLE BIT(6) +#define CFG_ECC_ENABLE BIT(4) +#define CFG_QUAD_ENABLE BIT(0) + +/* status register */ +#define REG_STATUS 0xc0 +#define STATUS_BUSY BIT(0) +#define STATUS_ERASE_FAILED BIT(2) +#define STATUS_PROG_FAILED BIT(3) +#define STATUS_ECC_MASK GENMASK(5, 4) +#define STATUS_ECC_NO_BITFLIPS (0 << 4) +#define STATUS_ECC_HAS_BITFLIPS (1 << 4) +#define STATUS_ECC_UNCOR_ERROR (2 << 4) + +struct spinand_op; +struct spinand_device; + +#define SPINAND_MAX_ID_LEN 4 + +/** + * struct spinand_id - SPI NAND id structure + * @data: buffer containing the id bytes. Currently 4 bytes large, but can + * be extended if required + * @len: ID length + * + * struct_spinand_id->data contains all bytes returned after a READ_ID command, + * including dummy bytes if the chip does not emit ID bytes right after the + * READ_ID command. The responsibility to extract real ID bytes is left to + * struct_manufacurer_ops->detect(). + */ +struct spinand_id { + u8 data[SPINAND_MAX_ID_LEN]; + int len; +}; + +/** + * struct manufacurer_ops - SPI NAND manufacturer specific operations + * @detect: detect a SPI NAND device. Every time a SPI NAND device is probed + * the core calls the struct_manufacurer_ops->detect() hook of each + * registered manufacturer until one of them return 1. Note that + * the first thing to check in this hook is that the manufacturer ID + * in struct_spinand_device->id matches the manufacturer whose + * ->detect() hook has been called. Should return 1 if there's a + * match, 0 if the manufacturer ID does not match and a negative + * error code otherwise. When true is returned, the core assumes + * that properties of the NAND chip (spinand->base.memorg and + * spinand->base.eccreq) have been filled + * @init: initialize a SPI NAND device + * @cleanup: cleanup a SPI NAND device + * + * Each SPI NAND manufacturer driver should implement this interface so that + * NAND chips coming from this vendor can be detected and initialized properly. + */ +struct spinand_manufacturer_ops { + int (*detect)(struct spinand_device *spinand); + int (*init)(struct spinand_device *spinand); + void (*cleanup)(struct spinand_device *spinand); +}; + +/** + * struct spinand_manufacturer - SPI NAND manufacturer instance + * @id: manufacturer ID + * @name: manufacturer name + * @ops: manufacturer operations + */ +struct spinand_manufacturer { + u8 id; + char *name; + const struct spinand_manufacturer_ops *ops; +}; + +/* SPI NAND manufacturers */ +extern const struct spinand_manufacturer macronix_spinand_manufacturer; +extern const struct spinand_manufacturer micron_spinand_manufacturer; +extern const struct spinand_manufacturer winbond_spinand_manufacturer; + +/** + * struct spinand_op_variants - SPI NAND operation variants + * @ops: the list of variants for a given operation + * @nops: the number of variants + * + * Some operations like read-from-cache/write-to-cache have several variants + * depending on the number of IO lines you use to transfer data or address + * cycles. This structure is a way to describe the different variants supported + * by a chip and let the core pick the best one based on the SPI mem controller + * capabilities. + */ +struct spinand_op_variants { + const struct spi_mem_op *ops; + unsigned int nops; +}; + +#define SPINAND_OP_VARIANTS(name, ...) \ + const struct spinand_op_variants name = { \ + .ops = (struct spi_mem_op[]) { __VA_ARGS__ }, \ + .nops = sizeof((struct spi_mem_op[]){ __VA_ARGS__ }) / \ + sizeof(struct spi_mem_op), \ + } + +/** + * spinand_ecc_info - description of the on-die ECC implemented by a SPI NAND + * chip + * @get_status: get the ECC status. Should return a positive number encoding + * the number of corrected bitflips if correction was possible or + * -EBADMSG if there are uncorrectable errors. I can also return + * other negative error codes if the error is not caused by + * uncorrectable bitflips + * @ooblayout: the OOB layout used by the on-die ECC implementation + */ +struct spinand_ecc_info { + int (*get_status)(struct spinand_device *spinand, u8 status); + const struct mtd_ooblayout_ops *ooblayout; +}; + +#define SPINAND_HAS_QE_BIT BIT(0) + +/** + * struct spinand_info - Structure used to describe SPI NAND chips + * @model: model name + * @devid: device ID + * @flags: OR-ing of the SPINAND_XXX flags + * @memorg: memory organization + * @eccreq: ECC requirements + * @eccinfo: on-die ECC info + * @op_variants: operations variants + * @op_variants.read_cache: variants of the read-cache operation + * @op_variants.write_cache: variants of the write-cache operation + * @op_variants.update_cache: variants of the update-cache operation + * @select_target: function used to select a target/die. Required only for + * multi-die chips + * + * Each SPI NAND manufacturer driver should have a spinand_info table + * describing all the chips supported by the driver. + */ +struct spinand_info { + const char *model; + u8 devid; + u32 flags; + struct nand_memory_organization memorg; + struct nand_ecc_req eccreq; + struct spinand_ecc_info eccinfo; + struct { + const struct spinand_op_variants *read_cache; + const struct spinand_op_variants *write_cache; + const struct spinand_op_variants *update_cache; + } op_variants; + int (*select_target)(struct spinand_device *spinand, + unsigned int target); +}; + +#define SPINAND_INFO_OP_VARIANTS(__read, __write, __update) \ + { \ + .read_cache = __read, \ + .write_cache = __write, \ + .update_cache = __update, \ + } + +#define SPINAND_ECCINFO(__ooblayout, __get_status) \ + .eccinfo = { \ + .ooblayout = __ooblayout, \ + .get_status = __get_status, \ + } + +#define SPINAND_SELECT_TARGET(__func) \ + .select_target = __func, + +#define SPINAND_INFO(__model, __id, __memorg, __eccreq, __op_variants, \ + __flags, ...) \ + { \ + .model = __model, \ + .devid = __id, \ + .memorg = __memorg, \ + .eccreq = __eccreq, \ + .op_variants = __op_variants, \ + .flags = __flags, \ + __VA_ARGS__ \ + } + +/** + * struct spinand_device - SPI NAND device instance + * @base: NAND device instance + * @spimem: pointer to the SPI mem object + * @lock: lock used to serialize accesses to the NAND + * @id: NAND ID as returned by READ_ID + * @flags: NAND flags + * @op_templates: various SPI mem op templates + * @op_templates.read_cache: read cache op template + * @op_templates.write_cache: write cache op template + * @op_templates.update_cache: update cache op template + * @select_target: select a specific target/die. Usually called before sending + * a command addressing a page or an eraseblock embedded in + * this die. Only required if your chip exposes several dies + * @cur_target: currently selected target/die + * @eccinfo: on-die ECC information + * @cfg_cache: config register cache. One entry per die + * @databuf: bounce buffer for data + * @oobbuf: bounce buffer for OOB data + * @scratchbuf: buffer used for everything but page accesses. This is needed + * because the spi-mem interface explicitly requests that buffers + * passed in spi_mem_op be DMA-able, so we can't based the bufs on + * the stack + * @manufacturer: SPI NAND manufacturer information + * @priv: manufacturer private data + */ +struct spinand_device { + struct nand_device base; + struct spi_mem *spimem; + struct mutex lock; + struct spinand_id id; + u32 flags; + + struct { + const struct spi_mem_op *read_cache; + const struct spi_mem_op *write_cache; + const struct spi_mem_op *update_cache; + } op_templates; + + int (*select_target)(struct spinand_device *spinand, + unsigned int target); + unsigned int cur_target; + + struct spinand_ecc_info eccinfo; + + u8 *cfg_cache; + u8 *databuf; + u8 *oobbuf; + u8 *scratchbuf; + const struct spinand_manufacturer *manufacturer; + void *priv; +}; + +/** + * mtd_to_spinand() - Get the SPI NAND device attached to an MTD instance + * @mtd: MTD instance + * + * Return: the SPI NAND device attached to @mtd. + */ +static inline struct spinand_device *mtd_to_spinand(struct mtd_info *mtd) +{ + return container_of(mtd_to_nanddev(mtd), struct spinand_device, base); +} + +/** + * spinand_to_mtd() - Get the MTD device embedded in a SPI NAND device + * @spinand: SPI NAND device + * + * Return: the MTD device embedded in @spinand. + */ +static inline struct mtd_info *spinand_to_mtd(struct spinand_device *spinand) +{ + return nanddev_to_mtd(&spinand->base); +} + +/** + * nand_to_spinand() - Get the SPI NAND device embedding an NAND object + * @nand: NAND object + * + * Return: the SPI NAND device embedding @nand. + */ +static inline struct spinand_device *nand_to_spinand(struct nand_device *nand) +{ + return container_of(nand, struct spinand_device, base); +} + +/** + * spinand_to_nand() - Get the NAND device embedded in a SPI NAND object + * @spinand: SPI NAND device + * + * Return: the NAND device embedded in @spinand. + */ +static inline struct nand_device * +spinand_to_nand(struct spinand_device *spinand) +{ + return &spinand->base; +} + +/** + * spinand_set_of_node - Attach a DT node to a SPI NAND device + * @spinand: SPI NAND device + * @np: DT node + * + * Attach a DT node to a SPI NAND device. + */ +static inline void spinand_set_of_node(struct spinand_device *spinand, + struct device_node *np) +{ + nanddev_set_of_node(&spinand->base, np); +} + +int spinand_match_and_init(struct spinand_device *dev, + const struct spinand_info *table, + unsigned int table_size, u8 devid); + +int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val); +int spinand_select_target(struct spinand_device *spinand, unsigned int target); + +#endif /* __LINUX_MTD_SPINAND_H */ |