diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/asoc-s3c.h | 1 | ||||
| -rw-r--r-- | include/linux/platform_data/bcmgenet.h | 18 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-imx.h | 1 | ||||
| -rw-r--r-- | include/linux/platform_data/dwc3-exynos.h | 24 | ||||
| -rw-r--r-- | include/linux/platform_data/hsmmc-omap.h | 90 | ||||
| -rw-r--r-- | include/linux/platform_data/lp855x.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/mmc-atmel-mci.h | 22 | ||||
| -rw-r--r-- | include/linux/platform_data/mmc-omap.h | 27 | ||||
| -rw-r--r-- | include/linux/platform_data/pxa_sdhci.h | 5 | ||||
| -rw-r--r-- | include/linux/platform_data/serial-omap.h | 3 | ||||
| -rw-r--r-- | include/linux/platform_data/st21nfca.h | 1 | ||||
| -rw-r--r-- | include/linux/platform_data/st21nfcb.h | 1 |
12 files changed, 134 insertions, 61 deletions
diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h index a6591c693ebb..5e0bc779e6c5 100644 --- a/include/linux/platform_data/asoc-s3c.h +++ b/include/linux/platform_data/asoc-s3c.h @@ -27,6 +27,7 @@ struct samsung_i2s { #define QUIRK_NO_MUXPSR (1 << 2) #define QUIRK_NEED_RSTCLR (1 << 3) #define QUIRK_SUPPORTS_TDM (1 << 4) +#define QUIRK_SUPPORTS_IDMA (1 << 5) /* Quirks of the I2S controller */ u32 quirks; dma_addr_t idma_addr; diff --git a/include/linux/platform_data/bcmgenet.h b/include/linux/platform_data/bcmgenet.h new file mode 100644 index 000000000000..26af54321958 --- /dev/null +++ b/include/linux/platform_data/bcmgenet.h @@ -0,0 +1,18 @@ +#ifndef __LINUX_PLATFORM_DATA_BCMGENET_H__ +#define __LINUX_PLATFORM_DATA_BCMGENET_H__ + +#include <linux/types.h> +#include <linux/if_ether.h> +#include <linux/phy.h> + +struct bcmgenet_platform_data { + bool mdio_enabled; + phy_interface_t phy_interface; + int phy_address; + int phy_speed; + int phy_duplex; + u8 mac_address[ETH_ALEN]; + int genet_version; +}; + +#endif diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index 6a1357d31871..7d964e787299 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -41,6 +41,7 @@ enum sdma_peripheral_type { IMX_DMATYPE_ESAI, /* ESAI */ IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ + IMX_DMATYPE_SAI, /* SAI */ }; enum imx_dma_prio { diff --git a/include/linux/platform_data/dwc3-exynos.h b/include/linux/platform_data/dwc3-exynos.h deleted file mode 100644 index 5eb7da9b3772..000000000000 --- a/include/linux/platform_data/dwc3-exynos.h +++ /dev/null @@ -1,24 +0,0 @@ -/** - * dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header. - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Author: Anton Tikhomirov <av.tikhomirov@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef _DWC3_EXYNOS_H_ -#define _DWC3_EXYNOS_H_ - -struct dwc3_exynos_data { - int phy_type; - int (*phy_init)(struct platform_device *pdev, int type); - int (*phy_exit)(struct platform_device *pdev, int type); -}; - -#endif /* _DWC3_EXYNOS_H_ */ diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h new file mode 100644 index 000000000000..67bbcf0785f6 --- /dev/null +++ b/include/linux/platform_data/hsmmc-omap.h @@ -0,0 +1,90 @@ +/* + * MMC definitions for OMAP2 + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * struct omap_hsmmc_dev_attr.flags possibilities + * + * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can + * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag + * should be set if this is the case. See for example Section 22.5.3 + * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia + * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). + * + * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers + * don't work correctly on some MMC controller instances on some + * OMAP3 SoCs; this flag should be set if this is the case. See + * for example Advisory 2.1.1.128 "MMC: Multiple Block Read + * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ + * Revision F (October 2010) (SPRZ278F). + */ +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) +#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) +#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2) + +struct omap_hsmmc_dev_attr { + u8 flags; +}; + +struct mmc_card; + +struct omap_hsmmc_platform_data { + /* back-link to device */ + struct device *dev; + + /* set if your board has components or wiring that limits the + * maximum frequency on the MMC bus */ + unsigned int max_freq; + + /* Integrating attributes from the omap_hwmod layer */ + u8 controller_flags; + + /* Register offset deviation */ + u16 reg_offset; + + /* + * 4/8 wires and any additional host capabilities + * need to OR'd all capabilities (ref. linux/mmc/host.h) + */ + u32 caps; /* Used for the MMC driver on 2430 and later */ + u32 pm_caps; /* PM capabilities of the mmc */ + + /* switch pin can be for card detect (default) or card cover */ + unsigned cover:1; + + /* use the internal clock */ + unsigned internal_clock:1; + + /* nonremovable e.g. eMMC */ + unsigned nonremovable:1; + + /* eMMC does not handle power off when not in sleep state */ + unsigned no_regulator_off_init:1; + + /* we can put the features above into this variable */ +#define HSMMC_HAS_PBIAS (1 << 0) +#define HSMMC_HAS_UPDATED_RESET (1 << 1) +#define HSMMC_HAS_HSPE_SUPPORT (1 << 2) + unsigned features; + + int switch_pin; /* gpio (card detect) */ + int gpio_wp; /* gpio (write protect) */ + + int (*set_power)(struct device *dev, int power_on, int vdd); + void (*remux)(struct device *dev, int power_on); + /* Call back before enabling / disabling regulators */ + void (*before_set_reg)(struct device *dev, int power_on, int vdd); + /* Call back after enabling / disabling regulators */ + void (*after_set_reg)(struct device *dev, int power_on, int vdd); + /* if we have special card, init it using this callback */ + void (*init_card)(struct mmc_card *card); + + const char *name; + u32 ocr_mask; +}; diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index 1b2ba24e4e03..9c7fd1efe495 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -136,6 +136,7 @@ struct lp855x_rom_data { Only valid when mode is PWM_BASED. * @size_program : total size of lp855x_rom_data * @rom_data : list of new eeprom/eprom registers + * @supply : regulator that supplies 3V input */ struct lp855x_platform_data { const char *name; @@ -144,6 +145,7 @@ struct lp855x_platform_data { unsigned int period_ns; int size_program; struct lp855x_rom_data *rom_data; + struct regulator *supply; }; #endif diff --git a/include/linux/platform_data/mmc-atmel-mci.h b/include/linux/platform_data/mmc-atmel-mci.h new file mode 100644 index 000000000000..399a2d5a14bd --- /dev/null +++ b/include/linux/platform_data/mmc-atmel-mci.h @@ -0,0 +1,22 @@ +#ifndef __MMC_ATMEL_MCI_H +#define __MMC_ATMEL_MCI_H + +#include <linux/platform_data/dma-atmel.h> +#include <linux/platform_data/dma-dw.h> + +/** + * struct mci_dma_data - DMA data for MCI interface + */ +struct mci_dma_data { +#ifdef CONFIG_ARM + struct at_dma_slave sdata; +#else + struct dw_dma_slave sdata; +#endif +}; + +/* accessor macros */ +#define slave_data_ptr(s) (&(s)->sdata) +#define find_slave_dev(s) ((s)->sdata.dma_dev) + +#endif /* __MMC_ATMEL_MCI_H */ diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h index 51e70cf25cbc..5c188f4e9bec 100644 --- a/include/linux/platform_data/mmc-omap.h +++ b/include/linux/platform_data/mmc-omap.h @@ -10,32 +10,8 @@ #define OMAP_MMC_MAX_SLOTS 2 -/* - * struct omap_mmc_dev_attr.flags possibilities - * - * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can - * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag - * should be set if this is the case. See for example Section 22.5.3 - * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia - * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). - * - * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers - * don't work correctly on some MMC controller instances on some - * OMAP3 SoCs; this flag should be set if this is the case. See - * for example Advisory 2.1.1.128 "MMC: Multiple Block Read - * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ - * Revision F (October 2010) (SPRZ278F). - */ -#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) -#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) -#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2) - struct mmc_card; -struct omap_mmc_dev_attr { - u8 flags; -}; - struct omap_mmc_platform_data { /* back-link to device */ struct device *dev; @@ -106,9 +82,6 @@ struct omap_mmc_platform_data { unsigned vcc_aux_disable_is_sleep:1; /* we can put the features above into this variable */ -#define HSMMC_HAS_PBIAS (1 << 0) -#define HSMMC_HAS_UPDATED_RESET (1 << 1) -#define HSMMC_HAS_HSPE_SUPPORT (1 << 2) #define MMC_OMAP7XX (1 << 3) #define MMC_OMAP15XX (1 << 4) #define MMC_OMAP16XX (1 << 5) diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h index 27d3156d093a..9e20c2fb4ffd 100644 --- a/include/linux/platform_data/pxa_sdhci.h +++ b/include/linux/platform_data/pxa_sdhci.h @@ -55,9 +55,4 @@ struct sdhci_pxa_platdata { unsigned int quirks2; unsigned int pm_caps; }; - -struct sdhci_pxa { - u8 clk_enable; - u8 power_mode; -}; #endif /* _PXA_SDHCI_H_ */ diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h index c860c1b314c0..d09275f3cde3 100644 --- a/include/linux/platform_data/serial-omap.h +++ b/include/linux/platform_data/serial-omap.h @@ -38,9 +38,6 @@ struct omap_uart_port_info { unsigned int dma_rx_timeout; unsigned int autosuspend_timeout; unsigned int dma_rx_poll_rate; - int DTR_gpio; - int DTR_inverted; - int DTR_present; int (*get_context_loss_count)(struct device *); void (*enable_wakeup)(struct device *, bool); diff --git a/include/linux/platform_data/st21nfca.h b/include/linux/platform_data/st21nfca.h index 1730312398ff..5087fff96d86 100644 --- a/include/linux/platform_data/st21nfca.h +++ b/include/linux/platform_data/st21nfca.h @@ -24,7 +24,6 @@ #define ST21NFCA_HCI_DRIVER_NAME "st21nfca_hci" struct st21nfca_nfc_platform_data { - unsigned int gpio_irq; unsigned int gpio_ena; unsigned int irq_polarity; }; diff --git a/include/linux/platform_data/st21nfcb.h b/include/linux/platform_data/st21nfcb.h index 2d11f1f5efab..c3b432f5b63e 100644 --- a/include/linux/platform_data/st21nfcb.h +++ b/include/linux/platform_data/st21nfcb.h @@ -24,7 +24,6 @@ #define ST21NFCB_NCI_DRIVER_NAME "st21nfcb_nci" struct st21nfcb_nfc_platform_data { - unsigned int gpio_irq; unsigned int gpio_reset; unsigned int irq_polarity; }; |